LinuxLists.cc - [PATCH 0/3] i2c: Add High speed I2C controller driver for Exynos5

2012-11-27 13:02:06

Subject: [PATCH 0/3] i2c: Add High speed I2C controller driver for Exynos5

Exynos5 and latter SoCs from Samsung supports High Speed I2C controller.
This patch set adds the controller driver, device tree information for Exynos5
platform and defines gating clocks.

Naveen Krishna Chatradhi (3):
i2c: exynos5: add High Speed I2C controller driver
ARM: exynos5: Add gate clocks for HS-I2C
arm: exynos5: Add HS-I2C device tree platform information

arch/arm/boot/dts/exynos5250-smdk5250.dts | 16 +
arch/arm/boot/dts/exynos5250.dtsi | 32 ++
arch/arm/mach-exynos/clock-exynos5.c | 20 +
drivers/i2c/busses/Kconfig | 6 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-exynos5.c | 758 +++++++++++++++++++++++++++++
drivers/i2c/busses/i2c-exynos5.h | 80 +++
7 files changed, 913 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-exynos5.c
create mode 100644 drivers/i2c/busses/i2c-exynos5.h

--
1.7.9.5

2012-11-27 13:02:47

by Naveen Krishna Chatradhi

[permalink] [raw]

Subject: [PATCH 1/3] i2c: exynos5: add High Speed I2C controller driver

Adds support for High Speed I2C driver found in Exynos5 and later
SoCs from Samsung. This driver currently supports Auto mode.

Driver only supports Device Tree method.

Signed-off-by: Taekgyun Ko <[email protected]>
Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
---
drivers/i2c/busses/Kconfig | 6 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-exynos5.c | 758 ++++++++++++++++++++++++++++++++++++++
drivers/i2c/busses/i2c-exynos5.h | 80 ++++
4 files changed, 845 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-exynos5.c
create mode 100644 drivers/i2c/busses/i2c-exynos5.h

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 65dd599..88e8833 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -609,6 +609,12 @@ config I2C_S3C2410
Say Y here to include support for I2C controller in the
Samsung SoCs.

+config I2C_EXYNOS5
+ tristate "Exynos5 HS-I2C Driver"
+ help
+ Say Y here to include support for High Speed I2C controller in the
+ Exynos5 series SoCs from Samsung.
+
config I2C_S6000
tristate "S6000 I2C support"
depends on XTENSA_VARIANT_S6000
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 2d33d62..426b4fd 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
+obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
new file mode 100644
index 0000000..5983aa9
--- /dev/null
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -0,0 +1,758 @@
+/* linux/drivers/i2c/busses/i2c-exynos5.c
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ *
+ * Exynos5 series High Speed I2C controller driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of_i2c.h>
+#include <linux/of_gpio.h>
+
+#include <asm/irq.h>
+#include "i2c-exynos5.h"
+
+#define HSI2C_POLLING 0
+#define HSI2C_FAST_SPD 0
+#define HSI2C_HIGH_SPD 1
+
+/* Max time to wait for bus to become idle after a xfer */
+#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000))
+
+struct exynos5_i2c {
+ unsigned int suspended:1;
+
+ struct i2c_msg *msg;
+ struct completion msg_complete;
+ unsigned int msg_byte_ptr;
+
+ unsigned int irq;
+
+ void __iomem *regs;
+ struct clk *clk;
+ struct device *dev;
+ struct resource *ioarea;
+ struct i2c_adapter adap;
+ unsigned int bus_number;
+ unsigned int speed_mode;
+ unsigned int fast_speed;
+ unsigned int high_speed;
+ int operation_mode;
+ int gpios[2];
+};
+
+static struct platform_device_id exynos5_driver_ids[] = {
+ {
+ .name = "exynos5-hs-i2c",
+ .driver_data = 0,
+ }, { },
+};
+MODULE_DEVICE_TABLE(platform, exynos5_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos5_i2c_match[] = {
+ { .compatible = "samsung,exynos5-hs-i2c", .data = (void *)0 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
+#endif
+
+static inline void dump_i2c_register(struct exynos5_i2c *i2c)
+{
+ dev_dbg(i2c->dev, "Register dump(%d) :\n %x\n %x\n %x\n %x\n"
+ " %x\n %x\n %x\n %x\n %x\n"
+ " %x\n %x\n %x\n %x\n %x\n"
+ " %x\n %x\n %x\n %x\n %x\n"
+ " %x\n %x\n %x\n %x\n %x\n"
+ , i2c->suspended
+ , readl(i2c->regs + HSI2C_CTL)
+ , readl(i2c->regs + HSI2C_FIFO_CTL)
+ , readl(i2c->regs + HSI2C_TRAILIG_CTL)
+ , readl(i2c->regs + HSI2C_CLK_CTL)
+ , readl(i2c->regs + HSI2C_CLK_SLOT)
+ , readl(i2c->regs + HSI2C_INT_ENABLE)
+ , readl(i2c->regs + HSI2C_INT_STATUS)
+ , readl(i2c->regs + HSI2C_ERR_STATUS)
+ , readl(i2c->regs + HSI2C_FIFO_STATUS)
+ , readl(i2c->regs + HSI2C_TX_DATA)
+ , readl(i2c->regs + HSI2C_RX_DATA)
+ , readl(i2c->regs + HSI2C_CONF)
+ , readl(i2c->regs + HSI2C_AUTO_CONFING)
+ , readl(i2c->regs + HSI2C_TIMEOUT)
+ , readl(i2c->regs + HSI2C_MANUAL_CMD)
+ , readl(i2c->regs + HSI2C_TRANS_STATUS)
+ , readl(i2c->regs + HSI2C_TIMING_HS1)
+ , readl(i2c->regs + HSI2C_TIMING_HS2)
+ , readl(i2c->regs + HSI2C_TIMING_HS3)
+ , readl(i2c->regs + HSI2C_TIMING_FS1)
+ , readl(i2c->regs + HSI2C_TIMING_FS2)
+ , readl(i2c->regs + HSI2C_TIMING_FS3)
+ , readl(i2c->regs + HSI2C_TIMING_SLA)
+ , readl(i2c->regs + HSI2C_ADDR));
+}
+
+static inline void exynos5_i2c_stop(struct exynos5_i2c *i2c)
+{
+ writel(0, i2c->regs + HSI2C_INT_ENABLE);
+
+ complete(&i2c->msg_complete);
+}
+
+static inline void exynos5_disable_irq(struct exynos5_i2c *i2c)
+{
+ unsigned long tmp = readl(i2c->regs + HSI2C_INT_STATUS);
+
+ writel(tmp, i2c->regs + HSI2C_INT_STATUS);
+}
+
+static void exynos5_i2c_en_timeout(struct exynos5_i2c *i2c)
+{
+ unsigned long i2c_timeout = readl(i2c->regs + HSI2C_TIMEOUT);
+
+ /* Clear to enable Timeout */
+ i2c_timeout &= ~HSI2C_TIMEOUT_EN;
+ writel(i2c_timeout, i2c->regs + HSI2C_TIMEOUT);
+}
+
+static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
+{
+ struct exynos5_i2c *i2c = dev_id;
+ unsigned char byte;
+
+ if (i2c->msg->flags & I2C_M_RD) {
+ while ((readl(i2c->regs + HSI2C_FIFO_STATUS) &
+ 0x1000000) == 0) {
+ byte = (unsigned char)readl(i2c->regs + HSI2C_RX_DATA);
+ i2c->msg->buf[i2c->msg_byte_ptr++] = byte;
+ }
+
+ if (i2c->msg_byte_ptr >= i2c->msg->len)
+ exynos5_i2c_stop(i2c);
+ } else {
+ byte = i2c->msg->buf[i2c->msg_byte_ptr++];
+ writel(byte, i2c->regs + HSI2C_TX_DATA);
+
+ if (i2c->msg_byte_ptr >= i2c->msg->len)
+ exynos5_i2c_stop(i2c);
+ }
+
+ exynos5_disable_irq(i2c);
+
+ return IRQ_HANDLED;
+}
+
+static int exynos5_i2c_init(struct exynos5_i2c *i2c);
+
+static int exynos5_i2c_reset(struct exynos5_i2c *i2c)
+{
+ unsigned long usi_ctl;
+
+ usi_ctl = readl(i2c->regs + HSI2C_CTL);
+ usi_ctl |= (1u << 31);
+ writel(usi_ctl, i2c->regs + HSI2C_CTL);
+ usi_ctl = readl(i2c->regs + HSI2C_CTL);
+ usi_ctl &= ~(1u << 31);
+ writel(usi_ctl, i2c->regs + HSI2C_CTL);
+ exynos5_i2c_init(i2c);
+
+ return 0;
+}
+
+static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
+ struct i2c_msg *msgs, int num, int stop)
+{
+ unsigned long timeout;
+ unsigned long trans_status;
+ unsigned long usi_fifo_stat;
+ unsigned long usi_ctl;
+ unsigned long i2c_auto_conf;
+ unsigned long i2c_addr;
+ unsigned long usi_int_en;
+ unsigned long usi_fifo_ctl;
+ unsigned char byte;
+ int ret = 0;
+ int operation_mode = i2c->operation_mode;
+
+ i2c->msg = msgs;
+ i2c->msg_byte_ptr = 0;
+
+ init_completion(&i2c->msg_complete);
+
+ usi_ctl = readl(i2c->regs + HSI2C_CTL);
+ i2c_auto_conf = readl(i2c->regs + HSI2C_AUTO_CONFING);
+
+ exynos5_i2c_en_timeout(i2c);
+
+ /* Set default trigger level for TXFIFO and RXFIFO */
+ usi_fifo_ctl = HSI2C_TXFIFO_TRIGGER_LEVEL |
+ HSI2C_RXFIFO_TRIGGER_LEVEL;
+ /* Enable RXFIFO and TXFIFO */
+ usi_fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN;
+
+ writel(usi_fifo_ctl, i2c->regs + HSI2C_FIFO_CTL);
+
+ usi_int_en = 0;
+ if (msgs->flags & I2C_M_RD) {
+ usi_ctl &= ~HSI2C_TXCHON;
+ usi_ctl |= HSI2C_RXCHON;
+
+ i2c_auto_conf |= HSI2C_READ_WRITE;
+
+ usi_int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN |
+ HSI2C_INT_TRAILING_EN);
+ } else {
+ usi_ctl &= ~HSI2C_RXCHON;
+ usi_ctl |= HSI2C_TXCHON;
+
+ i2c_auto_conf &= ~HSI2C_READ_WRITE;
+
+ usi_int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN;
+ }
+
+ if (stop == 1)
+ i2c_auto_conf |= HSI2C_STOP_AFTER_TRANS;
+ else
+ i2c_auto_conf &= ~HSI2C_STOP_AFTER_TRANS;
+
+
+ i2c_addr = readl(i2c->regs + HSI2C_ADDR);
+
+ /* Clear Slave Address for I2C Master (Auto mode only) */
+ i2c_addr &= ~(0x3ff << 10);
+ /* Clear Slave Address for I2C Slave */
+ i2c_addr &= ~(0x3ff << 0);
+ /* Clear Master ID for I2C Master (Auto and HS mode only) */
+ if (i2c->speed_mode == HSI2C_HIGH_SPD)
+ i2c_addr &= ~(0xff << 24);
+
+ i2c_addr |= ((msgs->addr & 0x7f) << 10);
+ writel(i2c_addr, i2c->regs + HSI2C_ADDR);
+
+ writel(usi_ctl, i2c->regs + HSI2C_CTL);
+
+ /* Clear and set TRANS_LEN */
+ i2c_auto_conf &= ~(0xffff);
+ i2c_auto_conf |= i2c->msg->len;
+ writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONFING);
+
+ /* Start data transfer in Master mode */
+ i2c_auto_conf = readl(i2c->regs + HSI2C_AUTO_CONFING);
+ i2c_auto_conf |= HSI2C_MASTER_RUN;
+ writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONFING);
+
+ /* Enable appropriate interrupts */
+ if (operation_mode != HSI2C_POLLING)
+ writel(usi_int_en, i2c->regs + HSI2C_INT_ENABLE);
+
+ ret = -EAGAIN;
+ if (msgs->flags & I2C_M_RD) {
+ if (operation_mode == HSI2C_POLLING) {
+ timeout = jiffies + EXYNOS5_I2C_TIMEOUT;
+ while (time_before(jiffies, timeout)) {
+ if ((readl(i2c->regs + HSI2C_FIFO_STATUS) &
+ 0x1000000) == 0) {
+ byte = (unsigned char)readl
+ (i2c->regs + HSI2C_RX_DATA);
+ i2c->msg->buf[i2c->msg_byte_ptr++]
+ = byte;
+ }
+
+ if (i2c->msg_byte_ptr >= i2c->msg->len) {
+ ret = 0;
+ break;
+ }
+ }
+
+ if (ret == -EAGAIN) {
+ exynos5_i2c_reset(i2c);
+ dev_warn(i2c->dev, "rx timeout\n");
+ return ret;
+ }
+ } else {
+ timeout = wait_for_completion_interruptible_timeout
+ (&i2c->msg_complete, EXYNOS5_I2C_TIMEOUT);
+
+ if (timeout == 0) {
+ exynos5_i2c_reset(i2c);
+ dev_warn(i2c->dev, "rx timeout\n");
+ return ret;
+ }
+
+ ret = 0;
+ }
+ } else {
+ if (operation_mode == HSI2C_POLLING) {
+ timeout = jiffies + EXYNOS5_I2C_TIMEOUT;
+ while (time_before(jiffies, timeout) &&
+ (i2c->msg_byte_ptr < i2c->msg->len)) {
+ if ((readl(i2c->regs + HSI2C_FIFO_STATUS)
+ & 0x7f) < 64) {
+ byte = i2c->msg->buf
+ [i2c->msg_byte_ptr++];
+ writel(byte,
+ i2c->regs + HSI2C_TX_DATA);
+ }
+ }
+ } else {
+ timeout = wait_for_completion_interruptible_timeout
+ (&i2c->msg_complete, EXYNOS5_I2C_TIMEOUT);
+
+ if (timeout == 0) {
+ exynos5_i2c_reset(i2c);
+ dev_warn(i2c->dev, "tx timeout\n");
+ return ret;
+ }
+
+ timeout = jiffies + timeout;
+ }
+ while (time_before(jiffies, timeout)) {
+ usi_fifo_stat = readl(i2c->regs + HSI2C_FIFO_STATUS);
+ trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
+ if ((usi_fifo_stat == HSI2C_FIFO_EMPTY) &&
+ ((trans_status == 0) ||
+ ((stop == 0) &&
+ (trans_status == 0x20000)))) {
+ ret = 0;
+ break;
+ }
+ }
+ if (ret == -EAGAIN) {
+ exynos5_i2c_reset(i2c);
+ dev_warn(i2c->dev, "tx timeout\n");
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static int exynos5_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct exynos5_i2c *i2c = (struct exynos5_i2c *)adap->algo_data;
+ int retry, i;
+ int ret;
+ int stop = 0;
+ struct i2c_msg *msgs_ptr = msgs;
+
+ if (i2c->suspended) {
+ dev_err(i2c->dev, "HS-I2C is not initialzed.\n");
+ return -EIO;
+ }
+
+ clk_prepare_enable(i2c->clk);
+
+ for (retry = 0; retry < adap->retries; retry++) {
+ for (i = 0; i < num; i++) {
+ if (i == num - 1)
+ stop = 1;
+ ret = exynos5_i2c_xfer_msg(i2c, msgs_ptr, 1, stop);
+ msgs_ptr++;
+
+ if (ret == -EAGAIN) {
+ msgs_ptr = msgs;
+ stop = 0;
+ break;
+ }
+ }
+ if (i == num) {
+ clk_disable_unprepare(i2c->clk);
+ return num;
+ }
+
+ dev_dbg(i2c->dev, "retrying transfer (%d)\n", retry);
+
+ udelay(100);
+ }
+
+ clk_disable_unprepare(i2c->clk);
+
+ return -EREMOTEIO;
+}
+
+static u32 exynos5_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm exynos5_i2c_algorithm = {
+ .master_xfer = exynos5_i2c_xfer,
+ .functionality = exynos5_i2c_func,
+};
+
+static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c)
+{
+ unsigned long i2c_timing_s1;
+ unsigned long i2c_timing_s2;
+ unsigned long i2c_timing_s3;
+ unsigned long i2c_timing_sla;
+ unsigned int op_clk;
+ unsigned int clkin = clk_get_rate(i2c->clk);
+ unsigned int n_clkdiv;
+ unsigned int t_start_su, t_start_hd;
+ unsigned int t_stop_su;
+ unsigned int t_data_su, t_data_hd;
+ unsigned int t_scl_l, t_scl_h;
+ unsigned int t_sr_release;
+ unsigned int t_ftl_cycle;
+ unsigned int i = 0, utemp0 = 0, utemp1 = 0, utemp2 = 0;
+
+ if (i2c->speed_mode == HSI2C_HIGH_SPD)
+ op_clk = i2c->high_speed;
+ else
+ op_clk = i2c->fast_speed;
+
+ /* FPCLK / FI2C =
+ * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
+ * uTemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
+ * uTemp1 = (TSCLK_L + TSCLK_H + 2)
+ * uTemp2 = TSCLK_L + TSCLK_H
+ */
+ t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
+ utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle;
+
+ /* CLK_DIV max is 256 */
+ for (i = 0; i < 256; i++) {
+ utemp1 = utemp0 / (i + 1);
+ /* SCLK_L/H max is 256 / 2 */
+ if (utemp1 < 128) {
+ utemp2 = utemp1 - 2;
+ break;
+ }
+ }
+
+ n_clkdiv = i;
+ t_scl_l = utemp2 / 2;
+ t_scl_h = utemp2 / 2;
+ t_start_su = t_scl_l;
+ t_start_hd = t_scl_l;
+ t_stop_su = t_scl_l;
+ t_data_su = t_scl_l / 2;
+ t_data_hd = t_scl_l / 2;
+ t_sr_release = utemp2;
+
+ i2c_timing_s1 = t_start_su << 24 | t_start_hd << 16 | t_stop_su << 8;
+ i2c_timing_s2 = t_data_su << 24 | t_scl_l << 8 | t_scl_h << 0;
+ i2c_timing_s3 = n_clkdiv << 16 | t_sr_release << 0;
+ i2c_timing_sla = t_data_hd << 0;
+
+ dev_dbg(i2c->dev, "tSTART_SU: %X, tSTART_HD: %X, tSTOP_SU: %X\n",
+ t_start_su, t_start_hd, t_stop_su);
+ dev_dbg(i2c->dev, "tDATA_SU: %X, tSCL_L: %X, tSCL_H: %X\n",
+ t_data_su, t_scl_l, t_scl_h);
+ dev_dbg(i2c->dev, "nClkDiv: %X, tSR_RELEASE: %X\n",
+ n_clkdiv, t_sr_release);
+ dev_dbg(i2c->dev, "tDATA_HD: %X\n", t_data_hd);
+
+ if (i2c->speed_mode == HSI2C_HIGH_SPD) {
+ writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_HS1);
+ writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_HS2);
+ writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3);
+ } else {
+ writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_FS1);
+ writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_FS2);
+ writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_FS3);
+ }
+ writel(i2c_timing_sla, i2c->regs + HSI2C_TIMING_SLA);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static int exynos5_i2c_parse_dt_gpio(struct exynos5_i2c *i2c)
+{
+ int idx, gpio, ret;
+
+ for (idx = 0; idx < 2; idx++) {
+ gpio = of_get_gpio(i2c->dev->of_node, idx);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
+ goto free_gpio;
+ }
+ i2c->gpios[idx] = gpio;
+
+ ret = gpio_request(gpio, "hsi2c-bus");
+ if (ret) {
+ dev_err(i2c->dev, "gpio [%d] request failed\n", gpio);
+ goto free_gpio;
+ }
+ }
+ return 0;
+
+free_gpio:
+ while (--idx >= 0)
+ gpio_free(i2c->gpios[idx]);
+ return -EINVAL;
+}
+
+static void exynos5_i2c_dt_gpio_free(struct exynos5_i2c *i2c)
+{
+ unsigned int idx;
+
+ for (idx = 0; idx < 2; idx++)
+ gpio_free(i2c->gpios[idx]);
+}
+#else
+static int exynos5_i2c_parse_dt_gpio(struct exynos5_i2c *i2c)
+{
+ return 0;
+}
+
+static void exynos5_i2c_dt_gpio_free(struct exynos5_i2c *i2c)
+{
+}
+#endif
+
+static int exynos5_i2c_init(struct exynos5_i2c *i2c)
+{
+ unsigned long usi_ctl = HSI2C_FUNC_MODE_I2C | HSI2C_MASTER;
+ unsigned long usi_trailing_ctl = HSI2C_TRAILING_COUNT;
+ unsigned long i2c_conf = readl(i2c->regs + HSI2C_CONF);
+
+ if (exynos5_i2c_parse_dt_gpio(i2c))
+ return -EINVAL;
+
+ writel(usi_ctl, i2c->regs + HSI2C_CTL);
+
+ writel(usi_trailing_ctl, i2c->regs + HSI2C_TRAILIG_CTL);
+
+ exynos5_i2c_set_timing(i2c);
+
+ if (i2c->speed_mode == HSI2C_HIGH_SPD) {
+ i2c_conf |= HSI2C_HS_MODE;
+ writel(i2c_conf, i2c->regs + HSI2C_CONF);
+ }
+
+ return 0;
+}
+
+static int exynos5_i2c_probe(struct platform_device *pdev)
+{
+ struct exynos5_i2c *i2c;
+ struct resource *res;
+ int ret;
+
+ i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
+ if (!i2c) {
+ dev_err(&pdev->dev, "no memory for state\n");
+ return -ENOMEM;
+ }
+
+ if (pdev->dev.of_node) {
+ /* i2c bus number is dynamically assigned */
+ i2c->bus_number = -1;
+
+ if (of_property_read_u32(pdev->dev.of_node,
+ "samsung,hsi2c-speed-mode", &i2c->speed_mode))
+ i2c->speed_mode = 1;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "samsung,hsi2c-hs-clk", &i2c->high_speed))
+ i2c->high_speed = 2500000;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "samsung,hsi2c-fs-clk", &i2c->fast_speed))
+ i2c->fast_speed = 400000;
+ } else {
+ dev_err(&pdev->dev, "no device node\n");
+ return -ENOENT;
+ }
+
+ strlcpy(i2c->adap.name, "exynos5250-i2c", sizeof(i2c->adap.name));
+ i2c->adap.owner = THIS_MODULE;
+ i2c->adap.algo = &exynos5_i2c_algorithm;
+ i2c->adap.retries = 2;
+ i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+
+ i2c->dev = &pdev->dev;
+ i2c->clk = clk_get(&pdev->dev, "hsi2c");
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ ret = -ENOENT;
+ goto err_noclk;
+ }
+
+ clk_prepare_enable(i2c->clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "cannot find HS-I2C IO resource\n");
+ ret = -ENOENT;
+ goto err_clk;
+ }
+
+ i2c->ioarea = request_mem_region(res->start, resource_size(res),
+ pdev->name);
+
+ if (i2c->ioarea == NULL) {
+ dev_err(&pdev->dev, "cannot request HS-I2C IO\n");
+ ret = -ENXIO;
+ goto err_clk;
+ }
+
+ i2c->regs = ioremap(res->start, resource_size(res));
+
+ if (i2c->regs == NULL) {
+ dev_err(&pdev->dev, "cannot map HS-I2C IO\n");
+ ret = -ENXIO;
+ goto err_ioarea;
+ }
+
+ dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
+ i2c->regs, i2c->ioarea, res);
+
+ i2c->adap.algo_data = i2c;
+ i2c->adap.dev.parent = &pdev->dev;
+
+ ret = exynos5_i2c_init(i2c);
+ if (ret != 0)
+ goto err_iomap;
+
+ i2c->irq = ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
+ dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+ goto err_iomap;
+ }
+
+ ret = request_irq(i2c->irq, exynos5_i2c_irq, IRQF_DISABLED,
+ dev_name(&pdev->dev), i2c);
+
+ if (ret != 0) {
+ dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq);
+ goto err_iomap;
+ }
+
+ i2c->adap.nr = i2c->bus_number;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
+
+ ret = i2c_add_numbered_adapter(&i2c->adap);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ goto err_irq;
+ }
+
+ of_i2c_register_devices(&i2c->adap);
+ platform_set_drvdata(pdev, i2c);
+
+ dev_info(&pdev->dev, "%s: Exynos5 HS-I2C adapter\n",
+ dev_name(&i2c->adap.dev));
+ clk_disable_unprepare(i2c->clk);
+ return 0;
+
+ err_irq:
+ free_irq(i2c->irq, i2c);
+
+ err_iomap:
+ iounmap(i2c->regs);
+
+ err_ioarea:
+ release_resource(i2c->ioarea);
+ kfree(i2c->ioarea);
+
+ err_clk:
+ clk_disable_unprepare(i2c->clk);
+ clk_put(i2c->clk);
+
+ err_noclk:
+ return ret;
+}
+
+static int exynos5_i2c_remove(struct platform_device *pdev)
+{
+ struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ free_irq(i2c->irq, i2c);
+
+ clk_disable_unprepare(i2c->clk);
+ clk_put(i2c->clk);
+
+ iounmap(i2c->regs);
+
+ release_resource(i2c->ioarea);
+ exynos5_i2c_dt_gpio_free(i2c);
+ kfree(i2c->ioarea);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int exynos5_i2c_suspend_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_lock_adapter(&i2c->adap);
+ i2c->suspended = 1;
+ i2c_unlock_adapter(&i2c->adap);
+
+ return 0;
+}
+
+static int exynos5_i2c_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_lock_adapter(&i2c->adap);
+ clk_prepare_enable(i2c->clk);
+ exynos5_i2c_init(i2c);
+ clk_disable_unprepare(i2c->clk);
+ i2c->suspended = 0;
+ i2c_unlock_adapter(&i2c->adap);
+
+ return 0;
+}
+
+static const struct dev_pm_ops exynos5_i2c_dev_pm_ops = {
+ .suspend_noirq = exynos5_i2c_suspend_noirq,
+ .resume_noirq = exynos5_i2c_resume,
+};
+
+#define EXYNOS5_DEV_PM_OPS (&exynos5_i2c_dev_pm_ops)
+#else
+#define EXYNOS5_DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver exynos5_i2c_driver = {
+ .probe = exynos5_i2c_probe,
+ .remove = exynos5_i2c_remove,
+ .id_table = exynos5_driver_ids,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "exynos5-i2c",
+ .pm = EXYNOS5_DEV_PM_OPS,
+ .of_match_table = of_match_ptr(exynos5_i2c_match),
+ },
+};
+
+static int __init i2c_adap_exynos5_init(void)
+{
+ return platform_driver_register(&exynos5_i2c_driver);
+}
+subsys_initcall(i2c_adap_exynos5_init);
+
+static void __exit i2c_adap_exynos5_exit(void)
+{
+ platform_driver_unregister(&exynos5_i2c_driver);
+}
+module_exit(i2c_adap_exynos5_exit);
+
+MODULE_DESCRIPTION("Exynos5 HS-I2C Bus driver");
+MODULE_AUTHOR("Taekgyun Ko, <[email protected]>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-exynos5.h b/drivers/i2c/busses/i2c-exynos5.h
new file mode 100644
index 0000000..063051e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-exynos5.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ *
+ * Exynos5 series HS-I2C Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_HS_IIC_H
+#define __ASM_ARCH_REGS_HS_IIC_H __FILE__
+
+/*
+ * Register Map
+ */
+#define HSI2C_CTL 0x00
+#define HSI2C_FIFO_CTL 0x04
+#define HSI2C_TRAILIG_CTL 0x08
+#define HSI2C_CLK_CTL 0x0C
+#define HSI2C_CLK_SLOT 0x10
+#define HSI2C_INT_ENABLE 0x20
+#define HSI2C_INT_STATUS 0x24
+#define HSI2C_ERR_STATUS 0x2C
+#define HSI2C_FIFO_STATUS 0x30
+#define HSI2C_TX_DATA 0x34
+#define HSI2C_RX_DATA 0x38
+#define HSI2C_CONF 0x40
+#define HSI2C_AUTO_CONFING 0x44
+#define HSI2C_TIMEOUT 0x48
+#define HSI2C_MANUAL_CMD 0x4C
+#define HSI2C_TRANS_STATUS 0x50
+#define HSI2C_TIMING_HS1 0x54
+#define HSI2C_TIMING_HS2 0x58
+#define HSI2C_TIMING_HS3 0x5C
+#define HSI2C_TIMING_FS1 0x60
+#define HSI2C_TIMING_FS2 0x64
+#define HSI2C_TIMING_FS3 0x68
+#define HSI2C_TIMING_SLA 0x6C
+#define HSI2C_ADDR 0x70
+
+/* I2C_CTL Register */
+#define HSI2C_FUNC_MODE_I2C (1u << 0)
+#define HSI2C_MASTER (1u << 3)
+#define HSI2C_RXCHON (1u << 6)
+#define HSI2C_TXCHON (1u << 7)
+
+/* I2C_FIFO_CTL Register */
+#define HSI2C_RXFIFO_EN (1u << 0)
+#define HSI2C_TXFIFO_EN (1u << 1)
+#define HSI2C_TXFIFO_TRIGGER_LEVEL (0x20 << 16)
+#define HSI2C_RXFIFO_TRIGGER_LEVEL (0x20 << 4)
+
+/* I2C_TRAILING_CTL Register */
+#define HSI2C_TRAILING_COUNT (0xf)
+
+/* I2C_INT_EN Register */
+#define HSI2C_INT_TX_ALMOSTEMPTY_EN (1u << 0) /* For TX FIFO */
+#define HSI2C_INT_RX_ALMOSTFULL_EN (1u << 1) /* For RX FIFO */
+#define HSI2C_INT_TRAILING_EN (1u << 6)
+
+/* I2C_CONF Register */
+#define HSI2C_AUTO_MODE (1u << 31)
+#define HSI2C_10BIT_ADDR_MODE (1u << 30)
+#define HSI2C_HS_MODE (1u << 29)
+
+/* I2C_AUTO_CONF Register */
+#define HSI2C_READ_WRITE (1u << 16)
+#define HSI2C_STOP_AFTER_TRANS (1u << 17)
+#define HSI2C_MASTER_RUN (1u << 31)
+
+/* I2C_TIMEOUT Register */
+#define HSI2C_TIMEOUT_EN (1u << 31)
+
+#define HSI2C_FIFO_EMPTY (0x1000100)
+
+#define HSI2C_FS_BPS 400000
+#define HSI2C_HS_BPS 2500000
+
+#endif /* __ASM_ARCH_REGS_HS_IIC_H */
--
1.7.9.5

2012-11-27 13:03:32

by Naveen Krishna Chatradhi

[permalink] [raw]

Subject: [PATCH 2/3] ARM: exynos5: Add gate clocks for HS-I2C

Adds clock gating bits for High Speed I2C channels 0, 1, 2 and 3.

Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
---
arch/arm/mach-exynos/clock-exynos5.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 2d3057b..37c6104 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -781,6 +781,26 @@ static struct clk exynos5_init_clocks_off[] = {
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 26),
}, {
+ .name = "hsi2c",
+ .devname = "exynos5-hs-i2c.0",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 28),
+ }, {
+ .name = "hsi2c",
+ .devname = "exynos5-hs-i2c.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 29),
+ }, {
+ .name = "hsi2c",
+ .devname = "exynos5-hs-i2c.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 30),
+ }, {
+ .name = "hsi2c",
+ .devname = "exynos5-hs-i2c.3",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 31),
+ }, {
.name = "ac97",
.devname = "samsung-ac97",
.enable = exynos5_clk_ip_peric_ctrl,
--
1.7.9.5

2012-11-27 13:04:12

by Naveen Krishna Chatradhi

[permalink] [raw]

Subject: [PATCH 3/3] arm: exynos5: Add HS-I2C device tree platform information

This patch adds HS-I2C device tree platform information in
exynos5.dtsi and exynos5-smdk5250.

Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 16 +++++++++++++++
arch/arm/boot/dts/exynos5250.dtsi | 32 +++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index fc37e19..4e22b84 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -161,6 +161,22 @@
};
};

+ hsi2c@12C50000 {
+ status = "disabled";
+ };
+
+ hsi2c@12D00000 {
+ status = "disabled";
+ };
+
+ hsi2c@12D50000 {
+ status = "disabled";
+ };
+
+ hsi2c@12DE0000 {
+ status = "disabled";
+ };
+
dwmmc_0: dwmmc0@12200000 {
num-slots = <1>;
supports-highspeed;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index a42b02b0..276ecb3 100755
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -182,6 +182,38 @@
#size-cells = <0>;
};

+ hsi2c@12C50000 {
+ compatible = "samsung,exynos5-hs-i2c";
+ reg = <0x12C50000 0x1000>;
+ interrupts = <0 56 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ hsi2c@12D00000 {
+ compatible = "samsung,exynos5-hs-i2c";
+ reg = <0x12D00000 0x1000>;
+ interrupts = <0 57 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ hsi2c@12D50000 {
+ compatible = "samsung,exynos5-hs-i2c";
+ reg = <0x12D50000 0x1000>;
+ interrupts = <0 58 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ hsi2c@12DE0000 {
+ compatible = "samsung,exynos5-hs-i2c";
+ reg = <0x12DE0000 0x1000>;
+ interrupts = <0 59 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
--
1.7.9.5

2012-11-27 13:30:39

by Naveen Krishna Chatradhi

[permalink] [raw]

Subject: [PATCH v12] i2c: exynos5: add High Speed I2C controller driver

Adds support for High Speed I2C driver found in Exynos5 and
later SoCs from Samsung.

Driver only supports Device Tree method.

Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
Signed-off-by: Taekgyun Ko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Andrew Bresticker <[email protected]>
Signed-off-by: Yuvaraj Kumar C D <[email protected]>
Signed-off-by: Andrew Bresticker <[email protected]>
---
Changes since v10:
1. Remove the incomplete runtime_pm code
2. Correct the error checks as suggested by Thomas
3. Use i2c_add_numbered_adapter() as suggested
4. Modified the irq routine to handle the specific interrupts
5. Added spinlocks around the irq code
6. Remove the "mode" of operation field from device tree node and use the
clock-frequency to decide the mode.

Changes since v11:
1. Use SIMPLE_DEV_PM_OPS instead of definition
2. Use i2c_add_adapter and remove i2c->adap.nr = -1;
3. Minor cosmotic changes based on review comments from Wolfram Sang

.../devicetree/bindings/i2c/i2c-exynos5.txt | 44 ++
drivers/i2c/busses/Kconfig | 7 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-exynos5.c | 776 ++++++++++++++++++++
4 files changed, 828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
create mode 100644 drivers/i2c/busses/i2c-exynos5.c

diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
new file mode 100644
index 0000000..056732c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -0,0 +1,44 @@
+* Samsung's High Speed I2C controller
+
+The Samsung's High Speed I2C controller is used to interface with I2C devices
+at various speeds ranging from 100khz to 3.4Mhz.
+
+Required properties:
+ - compatible: value should be.
+ -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - #address-cells: always 1 (for i2c addresses)
+ - #size-cells: always 0
+
+ - Pinctrl:
+ - pinctrl-0: Pin control group to be used for this controller.
+ - pinctrl-names: Should contain only one value - "default".
+
+Optional properties:
+ - clock-frequency: Desired operating frequency in Hz of the bus.
+ -> If not specified, the bus operates in fast-speed mode at
+ at 100khz.
+ -> If specified, the bus operates in high-speed mode only if the
+ clock-frequency is >= 1Mhz.
+
+Example:
+
+hsi2c@12ca0000 {
+ compatible = "samsung,exynos5-hsi2c";
+ reg = <0x12ca0000 0x100>;
+ interrupts = <56>;
+ clock-frequency = <100000>;
+
+ pinctrl-0 = <&i2c4_bus>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ };
+};
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index fcdd321..69b1848 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -436,6 +436,13 @@ config I2C_EG20T
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.

+config I2C_EXYNOS5
+ tristate "Exynos5 high-speed I2C driver"
+ depends on ARCH_EXYNOS5 && OF
+ help
+ Say Y here to include support for high-speed I2C controller in the
+ Exynos5 based Samsung SoCs.
+
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
depends on GPIOLIB
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index d00997f..d1ad371 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -42,6 +42,7 @@ i2c-designware-platform-objs := i2c-designware-platdrv.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
i2c-designware-pci-objs := i2c-designware-pcidrv.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
+obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
new file mode 100644
index 0000000..0b1e904
--- /dev/null
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -0,0 +1,776 @@
+/**
+ * i2c-exynos5.c - Samsung Exynos5 I2C Controller Driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_i2c.h>
+#include <linux/spinlock.h>
+
+/*
+ * HSI2C controller from Samsung supports 2 modes of operation
+ * 1. Auto mode: Where in master automatically controls the whole transaction
+ * 2. Manual mode: Software controls the transaction by issuing commands
+ * START, READ, WRITE, STOP, RESTART in I2C_MANUAL_CMD register.
+ *
+ * Operation mode can be selected by setting AUTO_MODE bit in I2C_CONF register
+ *
+ * Special bits are available for both modes of operation to set commands
+ * and for checking transfer status
+ */
+
+/* Register Map */
+#define HSI2C_CTL 0x00
+#define HSI2C_FIFO_CTL 0x04
+#define HSI2C_TRAILIG_CTL 0x08
+#define HSI2C_CLK_CTL 0x0C
+#define HSI2C_CLK_SLOT 0x10
+#define HSI2C_INT_ENABLE 0x20
+#define HSI2C_INT_STATUS 0x24
+#define HSI2C_ERR_STATUS 0x2C
+#define HSI2C_FIFO_STATUS 0x30
+#define HSI2C_TX_DATA 0x34
+#define HSI2C_RX_DATA 0x38
+#define HSI2C_CONF 0x40
+#define HSI2C_AUTO_CONF 0x44
+#define HSI2C_TIMEOUT 0x48
+#define HSI2C_MANUAL_CMD 0x4C
+#define HSI2C_TRANS_STATUS 0x50
+#define HSI2C_TIMING_HS1 0x54
+#define HSI2C_TIMING_HS2 0x58
+#define HSI2C_TIMING_HS3 0x5C
+#define HSI2C_TIMING_FS1 0x60
+#define HSI2C_TIMING_FS2 0x64
+#define HSI2C_TIMING_FS3 0x68
+#define HSI2C_TIMING_SLA 0x6C
+#define HSI2C_ADDR 0x70
+
+/* I2C_CTL Register bits */
+#define HSI2C_FUNC_MODE_I2C (1u << 0)
+#define HSI2C_MASTER (1u << 3)
+#define HSI2C_RXCHON (1u << 6)
+#define HSI2C_TXCHON (1u << 7)
+#define HSI2C_SW_RST (1u << 31)
+
+/* I2C_FIFO_CTL Register bits */
+#define HSI2C_RXFIFO_EN (1u << 0)
+#define HSI2C_TXFIFO_EN (1u << 1)
+#define HSI2C_RXFIFO_TRIGGER_LEVEL(x) ((x) << 4)
+#define HSI2C_TXFIFO_TRIGGER_LEVEL(x) ((x) << 16)
+
+/* As per user manual FIFO max depth is 64bytes */
+#define HSI2C_FIFO_MAX 0x40
+/* default trigger levels for Tx and Rx FIFOs */
+#define HSI2C_DEF_TXFIFO_LVL (HSI2C_FIFO_MAX - 0x30)
+#define HSI2C_DEF_RXFIFO_LVL (HSI2C_FIFO_MAX - 0x10)
+
+/* I2C_TRAILING_CTL Register bits */
+#define HSI2C_TRAILING_COUNT (0xf)
+
+/* I2C_INT_EN Register bits */
+#define HSI2C_INT_TX_ALMOSTEMPTY_EN (1u << 0)
+#define HSI2C_INT_RX_ALMOSTFULL_EN (1u << 1)
+#define HSI2C_INT_TRAILING_EN (1u << 6)
+#define HSI2C_INT_I2C_EN (1u << 9)
+
+/* I2C_INT_STAT Register bits */
+#define HSI2C_INT_TX_ALMOSTEMPTY (1u << 0)
+#define HSI2C_INT_RX_ALMOSTFULL (1u << 1)
+#define HSI2C_INT_TX_UNDERRUN (1u << 2)
+#define HSI2C_INT_TX_OVERRUN (1u << 3)
+#define HSI2C_INT_RX_UNDERRUN (1u << 4)
+#define HSI2C_INT_RX_OVERRUN (1u << 5)
+#define HSI2C_INT_TRAILING (1u << 6)
+#define HSI2C_INT_I2C (1u << 9)
+
+/* I2C_FIFO_STAT Register bits */
+#define HSI2C_RX_FIFO_EMPTY (1u << 24)
+#define HSI2C_RX_FIFO_FULL (1u << 23)
+#define HSI2C_RX_FIFO_LVL(x) ((x >> 16) & 0x7f)
+#define HSI2C_TX_FIFO_EMPTY (1u << 8)
+#define HSI2C_TX_FIFO_FULL (1u << 7)
+#define HSI2C_TX_FIFO_LVL(x) ((x >> 0) & 0x7f)
+
+/* I2C_CONF Register bits */
+#define HSI2C_AUTO_MODE (1u << 31)
+#define HSI2C_10BIT_ADDR_MODE (1u << 30)
+#define HSI2C_HS_MODE (1u << 29)
+
+/* I2C_AUTO_CONF Register bits */
+#define HSI2C_READ_WRITE (1u << 16)
+#define HSI2C_STOP_AFTER_TRANS (1u << 17)
+#define HSI2C_MASTER_RUN (1u << 31)
+
+/* I2C_TIMEOUT Register bits */
+#define HSI2C_TIMEOUT_EN (1u << 31)
+#define HSI2C_TIMEOUT_MASK 0xff
+
+/* I2C_TRANS_STATUS register bits */
+#define HSI2C_MASTER_BUSY (1u << 17)
+#define HSI2C_SLAVE_BUSY (1u << 16)
+#define HSI2C_TIMEOUT_AUTO (1u << 4)
+#define HSI2C_NO_DEV (1u << 3)
+#define HSI2C_NO_DEV_ACK (1u << 2)
+#define HSI2C_TRANS_ABORT (1u << 1)
+#define HSI2C_TRANS_DONE (1u << 0)
+
+/* I2C_ADDR register bits */
+#define HSI2C_SLV_ADDR_SLV(x) ((x & 0x3ff) << 0)
+#define HSI2C_SLV_ADDR_MAS(x) ((x & 0x3ff) << 10)
+#define HSI2C_MASTER_ID(x) ((x & 0xff) << 24)
+#define MASTER_ID(x) ((x & 0x7) + 0x08)
+
+/*
+ * Controller operating frequency, timing values for operation
+ * are calculated against this frequency
+ */
+#define HSI2C_HS_TX_CLOCK 1000000
+#define HSI2C_FS_TX_CLOCK 100000
+#define HSI2C_HIGH_SPD 1
+#define HSI2C_FAST_SPD 0
+
+#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000))
+
+struct exynos5_i2c {
+ struct i2c_adapter adap;
+ unsigned int suspended:1;
+
+ struct i2c_msg *msg;
+ struct completion msg_complete;
+ unsigned int msg_ptr;
+
+ unsigned int irq;
+
+ void __iomem *regs;
+ struct clk *clk;
+ struct device *dev;
+ int state;
+
+ spinlock_t lock; /* IRQ synchronization */
+
+ /*
+ * Since the TRANS_DONE bit is cleared on read, and we may read it
+ * either during an IRQ or after a transaction, keep track of its
+ * state here.
+ */
+ int trans_done;
+
+ /* Controller operating frequency */
+ unsigned int fs_clock;
+ unsigned int hs_clock;
+
+ /*
+ * HSI2C Controller can operate in
+ * 1. High speed upto 3.4Mbps
+ * 2. Fast speed upto 1Mbps
+ */
+ int speed_mode;
+};
+
+static const struct of_device_id exynos5_i2c_match[] = {
+ { .compatible = "samsung,exynos5-hsi2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
+
+static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
+{
+ writel(readl(i2c->regs + HSI2C_INT_STATUS),
+ i2c->regs + HSI2C_INT_STATUS);
+}
+
+/*
+ * exynos5_i2c_set_timing: updates the registers with appropriate
+ * timing values calculated
+ *
+ * Returns 0 on success, -EINVAL if the cycle length cannot
+ * be calculated.
+ */
+static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode)
+{
+ u32 i2c_timing_s1;
+ u32 i2c_timing_s2;
+ u32 i2c_timing_s3;
+ u32 i2c_timing_sla;
+ unsigned int t_start_su, t_start_hd;
+ unsigned int t_stop_su;
+ unsigned int t_data_su, t_data_hd;
+ unsigned int t_scl_l, t_scl_h;
+ unsigned int t_sr_release;
+ unsigned int t_ftl_cycle;
+ unsigned int clkin = clk_get_rate(i2c->clk);
+ unsigned int div, utemp0 = 0, utemp1 = 0, clk_cycle;
+ unsigned int op_clk = (mode == HSI2C_HIGH_SPD) ?
+ i2c->hs_clock : i2c->fs_clock;
+
+ /*
+ * FPCLK / FI2C =
+ * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
+ * utemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
+ * utemp1 = (TSCLK_L + TSCLK_H + 2)
+ */
+ t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
+ utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle;
+
+ /* CLK_DIV max is 256 */
+ for (div = 0; div < 256; div++) {
+ utemp1 = utemp0 / (div + 1);
+
+ /*
+ * SCL_L and SCL_H each has max value of 255
+ * Hence, For the clk_cycle to the have right value
+ * utemp1 has to be less then 512 and more than 4.
+ */
+ if ((utemp1 < 512) && (utemp1 > 4)) {
+ clk_cycle = utemp1 - 2;
+ break;
+ } else if (div == 255) {
+ dev_warn(i2c->dev, "Failed to calculate divisor");
+ return -EINVAL;
+ }
+ }
+
+ t_scl_l = clk_cycle / 2;
+ t_scl_h = clk_cycle / 2;
+ t_start_su = t_scl_l;
+ t_start_hd = t_scl_l;
+ t_stop_su = t_scl_l;
+ t_data_su = t_scl_l / 2;
+ t_data_hd = t_scl_l / 2;
+ t_sr_release = clk_cycle;
+
+ i2c_timing_s1 = t_start_su << 24 | t_start_hd << 16 | t_stop_su << 8;
+ i2c_timing_s2 = t_data_su << 24 | t_scl_l << 8 | t_scl_h << 0;
+ i2c_timing_s3 = div << 16 | t_sr_release << 0;
+ i2c_timing_sla = t_data_hd << 0;
+
+ dev_dbg(i2c->dev, "tSTART_SU: %X, tSTART_HD: %X, tSTOP_SU: %X\n",
+ t_start_su, t_start_hd, t_stop_su);
+ dev_dbg(i2c->dev, "tDATA_SU: %X, tSCL_L: %X, tSCL_H: %X\n",
+ t_data_su, t_scl_l, t_scl_h);
+ dev_dbg(i2c->dev, "nClkDiv: %X, tSR_RELEASE: %X\n",
+ div, t_sr_release);
+ dev_dbg(i2c->dev, "tDATA_HD: %X\n", t_data_hd);
+
+ if (mode == HSI2C_HIGH_SPD) {
+ writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_HS1);
+ writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_HS2);
+ writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3);
+ } else {
+ writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_FS1);
+ writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_FS2);
+ writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_FS3);
+ }
+ writel(i2c_timing_sla, i2c->regs + HSI2C_TIMING_SLA);
+
+ return 0;
+}
+
+static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c)
+{
+ /*
+ * Configure the Fast speed timing values
+ * Even the High Speed mode initially starts with Fast mode
+ */
+ if (exynos5_i2c_set_timing(i2c, HSI2C_FAST_SPD)) {
+ dev_err(i2c->dev, "HSI2C FS Clock set up failed\n");
+ return -EINVAL;
+ }
+
+ /* configure the High speed timing values */
+ if (i2c->speed_mode == HSI2C_HIGH_SPD) {
+ if (exynos5_i2c_set_timing(i2c, HSI2C_HIGH_SPD)) {
+ dev_err(i2c->dev, "HSI2C HS Clock set up failed\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * exynos5_i2c_init: configures the controller for I2C functionality
+ * Programs I2C controller for Master mode operation
+ */
+static void exynos5_i2c_init(struct exynos5_i2c *i2c)
+{
+ u32 i2c_conf = readl(i2c->regs + HSI2C_CONF);
+ u32 i2c_timeout = readl(i2c->regs + HSI2C_TIMEOUT);
+
+ /* Clear to disable Timeout */
+ i2c_timeout &= ~HSI2C_TIMEOUT_EN;
+ writel(i2c_timeout, i2c->regs + HSI2C_TIMEOUT);
+
+ writel((HSI2C_FUNC_MODE_I2C | HSI2C_MASTER),
+ i2c->regs + HSI2C_CTL);
+ writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL);
+
+ if (i2c->speed_mode == HSI2C_HIGH_SPD) {
+ writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)),
+ i2c->regs + HSI2C_ADDR);
+ i2c_conf |= HSI2C_HS_MODE;
+ }
+
+ writel(i2c_conf | HSI2C_AUTO_MODE, i2c->regs + HSI2C_CONF);
+}
+
+static void exynos5_i2c_reset(struct exynos5_i2c *i2c)
+{
+ u32 i2c_ctl;
+
+ /* Set and clear the bit for reset */
+ i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+ i2c_ctl |= HSI2C_SW_RST;
+ writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+ i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+ i2c_ctl &= ~HSI2C_SW_RST;
+ writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+ /* We don't expect calculations to fail during the run */
+ exynos5_hsi2c_clock_setup(i2c);
+ /* Initialize the configure registers */
+ exynos5_i2c_init(i2c);
+}
+
+/*
+ * exynos5_i2c_irq: top level IRQ servicing routine
+ *
+ * INT_STATUS registers gives the interrupt details. Further,
+ * FIFO_STATUS or TRANS_STATUS registers are to be check for detailed
+ * state of the bus.
+ */
+static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
+{
+ struct exynos5_i2c *i2c = dev_id;
+ u32 fifo_level, int_status, fifo_status, trans_status;
+ unsigned char byte;
+ int len = 0;
+
+ i2c->state = -EINVAL;
+
+ spin_lock(&i2c->lock);
+
+ int_status = readl(i2c->regs + HSI2C_INT_STATUS);
+ writel(int_status, i2c->regs + HSI2C_INT_STATUS);
+ fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
+
+ /* handle interrupt related to the transfer status */
+ if (int_status & HSI2C_INT_I2C) {
+ trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
+ if (trans_status & HSI2C_NO_DEV_ACK) {
+ dev_dbg(i2c->dev, "No ACK from device\n");
+ i2c->state = -ENXIO;
+ goto stop;
+ } else if (trans_status & HSI2C_NO_DEV) {
+ dev_dbg(i2c->dev, "No device\n");
+ i2c->state = -ENXIO;
+ goto stop;
+ } else if (trans_status & HSI2C_TRANS_ABORT) {
+ dev_dbg(i2c->dev, "Deal with arbitration lose\n");
+ i2c->state = -EAGAIN;
+ goto stop;
+ } else if (trans_status & HSI2C_TIMEOUT_AUTO) {
+ dev_dbg(i2c->dev, "Accessing device timed out\n");
+ i2c->state = -EAGAIN;
+ goto stop;
+ } else if (trans_status & HSI2C_TRANS_DONE) {
+ i2c->trans_done = 1;
+ i2c->state = 0;
+ }
+ }
+
+ if ((i2c->msg->flags & I2C_M_RD) && (int_status &
+ (HSI2C_INT_TRAILING | HSI2C_INT_RX_ALMOSTFULL))) {
+ fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
+ fifo_level = HSI2C_RX_FIFO_LVL(fifo_status);
+ len = min(fifo_level, i2c->msg->len - i2c->msg_ptr);
+
+ while (len > 0) {
+ byte = (unsigned char)
+ readl(i2c->regs + HSI2C_RX_DATA);
+ i2c->msg->buf[i2c->msg_ptr++] = byte;
+ len--;
+ }
+ i2c->state = 0;
+ } else if (int_status & HSI2C_INT_TX_ALMOSTEMPTY) {
+ fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
+ fifo_level = HSI2C_TX_FIFO_LVL(fifo_status);
+
+ len = HSI2C_FIFO_MAX - fifo_level;
+ if (len > (i2c->msg->len - i2c->msg_ptr))
+ len = i2c->msg->len - i2c->msg_ptr;
+
+ while (len > 0) {
+ byte = i2c->msg->buf[i2c->msg_ptr++];
+ writel(byte, i2c->regs + HSI2C_TX_DATA);
+ len--;
+ }
+ i2c->state = 0;
+ }
+
+ stop:
+ if ((i2c->trans_done && (i2c->msg->len == i2c->msg_ptr)) ||
+ (i2c->state < 0)) {
+ writel(0, i2c->regs + HSI2C_INT_ENABLE);
+ exynos5_i2c_clr_pend_irq(i2c);
+ complete(&i2c->msg_complete);
+ }
+
+ spin_unlock(&i2c->lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * exynos5_i2c_wait_bus_idle
+ *
+ * Wait for the bus to go idle, indicated by the MASTER_BUSY bit being
+ * cleared.
+ *
+ * Returns -EBUSY if the bus cannot be bought to idle
+ */
+static int exynos5_i2c_wait_bus_idle(struct exynos5_i2c *i2c)
+{
+ unsigned long stop_time;
+ u32 trans_status;
+
+ /* wait for 100 milli seconds for the bus to be idle */
+ stop_time = jiffies + msecs_to_jiffies(100) + 1;
+ do {
+ trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
+ if (!(trans_status & HSI2C_MASTER_BUSY))
+ return 0;
+
+ usleep_range(50, 200);
+ } while (time_before(jiffies, stop_time));
+
+ return -EBUSY;
+}
+
+/*
+ * exynos5_i2c_message_start: Configures the bus and starts the xfer
+ * i2c: struct exynos5_i2c pointer for the current bus
+ * stop: Enables stop after transfer if set. Set for last transfer of
+ * in the list of messages.
+ *
+ * Configures the bus for read/write function
+ * Sets chip address to talk to, message length to be sent.
+ * Enables appropriate interrupts and sends start xfer command.
+ */
+static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
+{
+ u32 i2c_ctl;
+ u32 int_en = HSI2C_INT_I2C_EN;
+ u32 i2c_auto_conf = 0;
+ u32 fifo_ctl;
+ unsigned long flags;
+
+ i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+ i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
+ fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN;
+
+ if (i2c->msg->flags & I2C_M_RD) {
+ i2c_ctl |= HSI2C_RXCHON;
+
+ i2c_auto_conf = HSI2C_READ_WRITE;
+
+ fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(HSI2C_DEF_TXFIFO_LVL);
+ int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN |
+ HSI2C_INT_TRAILING_EN);
+ } else {
+ i2c_ctl |= HSI2C_TXCHON;
+
+ fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(HSI2C_DEF_RXFIFO_LVL);
+ int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN;
+ }
+
+ writel(HSI2C_SLV_ADDR_MAS(i2c->msg->addr), i2c->regs + HSI2C_ADDR);
+
+ writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL);
+ writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+
+ /*
+ * Enable interrupts before starting the transfer so that we don't
+ * miss any INT_I2C interrupts.
+ */
+ spin_lock_irqsave(&i2c->lock, flags);
+ writel(int_en, i2c->regs + HSI2C_INT_ENABLE);
+
+ if (stop == 1)
+ i2c_auto_conf |= HSI2C_STOP_AFTER_TRANS;
+ i2c_auto_conf |= i2c->msg->len;
+ i2c_auto_conf |= HSI2C_MASTER_RUN;
+ writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONF);
+ spin_unlock_irqrestore(&i2c->lock, flags);
+}
+
+static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
+ struct i2c_msg *msgs, int stop)
+{
+ unsigned long timeout;
+ int ret;
+
+ i2c->msg = msgs;
+ i2c->msg_ptr = 0;
+ i2c->trans_done = 0;
+
+ INIT_COMPLETION(i2c->msg_complete);
+
+ exynos5_i2c_message_start(i2c, stop);
+
+ timeout = wait_for_completion_timeout(&i2c->msg_complete,
+ EXYNOS5_I2C_TIMEOUT);
+ if (timeout == 0)
+ ret = -ETIMEDOUT;
+ else
+ ret = i2c->state;
+
+ /*
+ * If this is the last message to be transfered (stop == 1)
+ * Then check if the bus can be brought back to idle.
+ */
+ if (ret == 0 && stop)
+ ret = exynos5_i2c_wait_bus_idle(i2c);
+
+ if (ret < 0) {
+ exynos5_i2c_reset(i2c);
+ if (ret == -ETIMEDOUT)
+ dev_warn(i2c->dev, "%s timeout\n",
+ (msgs->flags & I2C_M_RD) ? "rx" : "tx");
+ }
+
+ /* Return the state as in interrupt routine */
+ return ret;
+}
+
+static int exynos5_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct exynos5_i2c *i2c = (struct exynos5_i2c *)adap->algo_data;
+ int i = 0, ret = 0, stop = 0;
+
+ if (i2c->suspended) {
+ dev_err(i2c->dev, "HS-I2C is not initialzed.\n");
+ return -EIO;
+ }
+
+ clk_prepare_enable(i2c->clk);
+
+ for (i = 0; i < num; i++, msgs++) {
+ stop = (i == num - 1);
+
+ ret = exynos5_i2c_xfer_msg(i2c, msgs, stop);
+
+ if (ret < 0)
+ goto out;
+ }
+
+ if (i == num) {
+ ret = num;
+ } else {
+ /* Only one message, cannot access the device */
+ if (i == 1)
+ ret = -EREMOTEIO;
+ else
+ ret = i;
+
+ dev_warn(i2c->dev, "xfer message failed\n");
+ }
+
+ out:
+ clk_disable_unprepare(i2c->clk);
+ return ret;
+}
+
+static u32 exynos5_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm exynos5_i2c_algorithm = {
+ .master_xfer = exynos5_i2c_xfer,
+ .functionality = exynos5_i2c_func,
+};
+
+static int exynos5_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct exynos5_i2c *i2c;
+ struct resource *mem;
+ unsigned int op_clock;
+ int ret;
+
+ i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
+ if (!i2c) {
+ dev_err(&pdev->dev, "no memory for state\n");
+ return -ENOMEM;
+ }
+
+ if (of_property_read_u32(np, "clock-frequency", &op_clock)) {
+ i2c->speed_mode = HSI2C_FAST_SPD;
+ i2c->fs_clock = HSI2C_FS_TX_CLOCK;
+ } else {
+ if (op_clock >= HSI2C_HS_TX_CLOCK) {
+ i2c->speed_mode = HSI2C_HIGH_SPD;
+ i2c->fs_clock = HSI2C_FS_TX_CLOCK;
+ i2c->hs_clock = op_clock;
+ } else {
+ i2c->speed_mode = HSI2C_FAST_SPD;
+ i2c->fs_clock = op_clock;
+ }
+ }
+
+ strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name));
+ i2c->adap.owner = THIS_MODULE;
+ i2c->adap.algo = &exynos5_i2c_algorithm;
+ i2c->adap.retries = 3;
+
+ i2c->dev = &pdev->dev;
+ i2c->clk = devm_clk_get(&pdev->dev, "hsi2c");
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ return -ENOENT;
+ }
+
+ clk_prepare_enable(i2c->clk);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(i2c->regs)) {
+ ret = PTR_ERR(i2c->regs);
+ goto err_clk;
+ }
+
+ i2c->adap.dev.of_node = np;
+ i2c->adap.algo_data = i2c;
+ i2c->adap.dev.parent = &pdev->dev;
+
+ /* Clear pending interrupts from u-boot or misc causes */
+ exynos5_i2c_clr_pend_irq(i2c);
+
+ spin_lock_init(&i2c->lock);
+ init_completion(&i2c->msg_complete);
+
+ i2c->irq = ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
+ dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+ ret = -EINVAL;
+ goto err_clk;
+ }
+
+ ret = devm_request_irq(&pdev->dev, i2c->irq, exynos5_i2c_irq,
+ IRQF_NO_SUSPEND | IRQF_ONESHOT,
+ dev_name(&pdev->dev), i2c);
+
+ if (ret != 0) {
+ dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq);
+ goto err_clk;
+ }
+
+ ret = exynos5_hsi2c_clock_setup(i2c);
+ if (ret)
+ goto err_clk;
+
+ exynos5_i2c_init(i2c);
+
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ goto err_clk;
+ }
+
+ of_i2c_register_devices(&i2c->adap);
+ platform_set_drvdata(pdev, i2c);
+
+ clk_disable_unprepare(i2c->clk);
+
+ return 0;
+
+ err_clk:
+ clk_disable_unprepare(i2c->clk);
+ return ret;
+}
+
+static int exynos5_i2c_remove(struct platform_device *pdev)
+{
+ struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ clk_disable_unprepare(i2c->clk);
+
+ return 0;
+}
+
+static int exynos5_i2c_suspend_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c->suspended = 1;
+
+ return 0;
+}
+
+static int exynos5_i2c_resume_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+ int ret = 0;
+
+ clk_prepare_enable(i2c->clk);
+
+ ret = exynos5_hsi2c_clock_setup(i2c);
+ if (ret) {
+ clk_disable_unprepare(i2c->clk);
+ return ret;
+ }
+
+ exynos5_i2c_init(i2c);
+ clk_disable_unprepare(i2c->clk);
+ i2c->suspended = 0;
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq,
+ exynos5_i2c_resume_noirq);
+
+static struct platform_driver exynos5_i2c_driver = {
+ .probe = exynos5_i2c_probe,
+ .remove = exynos5_i2c_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "exynos5-hsi2c",
+ .pm = &exynos5_i2c_dev_pm_ops,
+ .of_match_table = exynos5_i2c_match,
+ },
+};
+
+module_platform_driver(exynos5_i2c_driver);
+
+MODULE_DESCRIPTION("Exynos5 HS-I2C Bus driver");
+MODULE_AUTHOR("Naveen Krishna Chatradhi, <[email protected]>");
+MODULE_AUTHOR("Taekgyun Ko, <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
1.7.10.4

2013-10-25 11:47:38

by Naveen Krishna Ch

[permalink] [raw]

Subject: Re: [PATCH v12] i2c: exynos5: add High Speed I2C controller driver

On 16 October 2013 11:00, Naveen Krishna Chatradhi
<[email protected]> wrote:
> Adds support for High Speed I2C driver found in Exynos5 and
> later SoCs from Samsung.
>
> Driver only supports Device Tree method.
>
> Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
> Signed-off-by: Taekgyun Ko <[email protected]>
> Reviewed-by: Simon Glass <[email protected]>
> Tested-by: Andrew Bresticker <[email protected]>
> Signed-off-by: Yuvaraj Kumar C D <[email protected]>
> Signed-off-by: Andrew Bresticker <[email protected]>
> ---
> Changes since v10:
> 1. Remove the incomplete runtime_pm code
> 2. Correct the error checks as suggested by Thomas
> 3. Use i2c_add_numbered_adapter() as suggested
> 4. Modified the irq routine to handle the specific interrupts
> 5. Added spinlocks around the irq code
> 6. Remove the "mode" of operation field from device tree node and use the
> clock-frequency to decide the mode.
>
> Changes since v11:
> 1. Use SIMPLE_DEV_PM_OPS instead of definition
> 2. Use i2c_add_adapter and remove i2c->adap.nr = -1;
> 3. Minor cosmotic changes based on review comments from Wolfram Sang
>
> .../devicetree/bindings/i2c/i2c-exynos5.txt | 44 ++
> drivers/i2c/busses/Kconfig | 7 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-exynos5.c | 776 ++++++++++++++++++++
> 4 files changed, 828 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
> create mode 100644 drivers/i2c/busses/i2c-exynos5.c
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
> new file mode 100644
> index 0000000..056732c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
> @@ -0,0 +1,44 @@
> +* Samsung's High Speed I2C controller
> +
> +The Samsung's High Speed I2C controller is used to interface with I2C devices
> +at various speeds ranging from 100khz to 3.4Mhz.
> +
> +Required properties:
> + - compatible: value should be.
> + -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
> + - reg: physical base address of the controller and length of memory mapped
> + region.
> + - interrupts: interrupt number to the cpu.
> + - #address-cells: always 1 (for i2c addresses)
> + - #size-cells: always 0
> +
> + - Pinctrl:
> + - pinctrl-0: Pin control group to be used for this controller.
> + - pinctrl-names: Should contain only one value - "default".
> +
> +Optional properties:
> + - clock-frequency: Desired operating frequency in Hz of the bus.
> + -> If not specified, the bus operates in fast-speed mode at
> + at 100khz.
> + -> If specified, the bus operates in high-speed mode only if the
> + clock-frequency is >= 1Mhz.
> +
> +Example:
> +
> +hsi2c@12ca0000 {
> + compatible = "samsung,exynos5-hsi2c";
> + reg = <0x12ca0000 0x100>;
> + interrupts = <56>;
> + clock-frequency = <100000>;
> +
> + pinctrl-0 = <&i2c4_bus>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + s2mps11_pmic@66 {
> + compatible = "samsung,s2mps11-pmic";
> + reg = <0x66>;
> + };
> +};
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index fcdd321..69b1848 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -436,6 +436,13 @@ config I2C_EG20T
> ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
> ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
>
> +config I2C_EXYNOS5
> + tristate "Exynos5 high-speed I2C driver"
> + depends on ARCH_EXYNOS5 && OF
> + help
> + Say Y here to include support for high-speed I2C controller in the
> + Exynos5 based Samsung SoCs.
> +
> config I2C_GPIO
> tristate "GPIO-based bitbanging I2C"
> depends on GPIOLIB
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index d00997f..d1ad371 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -42,6 +42,7 @@ i2c-designware-platform-objs := i2c-designware-platdrv.o
> obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
> i2c-designware-pci-objs := i2c-designware-pcidrv.o
> obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
> +obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o
> obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
> obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
> obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
> diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
> new file mode 100644
> index 0000000..0b1e904
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-exynos5.c
> @@ -0,0 +1,776 @@
> +/**
> + * i2c-exynos5.c - Samsung Exynos5 I2C Controller Driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/time.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_i2c.h>
> +#include <linux/spinlock.h>
> +
> +/*
> + * HSI2C controller from Samsung supports 2 modes of operation
> + * 1. Auto mode: Where in master automatically controls the whole transaction
> + * 2. Manual mode: Software controls the transaction by issuing commands
> + * START, READ, WRITE, STOP, RESTART in I2C_MANUAL_CMD register.
> + *
> + * Operation mode can be selected by setting AUTO_MODE bit in I2C_CONF register
> + *
> + * Special bits are available for both modes of operation to set commands
> + * and for checking transfer status
> + */
> +
> +/* Register Map */
> +#define HSI2C_CTL 0x00
> +#define HSI2C_FIFO_CTL 0x04
> +#define HSI2C_TRAILIG_CTL 0x08
> +#define HSI2C_CLK_CTL 0x0C
> +#define HSI2C_CLK_SLOT 0x10
> +#define HSI2C_INT_ENABLE 0x20
> +#define HSI2C_INT_STATUS 0x24
> +#define HSI2C_ERR_STATUS 0x2C
> +#define HSI2C_FIFO_STATUS 0x30
> +#define HSI2C_TX_DATA 0x34
> +#define HSI2C_RX_DATA 0x38
> +#define HSI2C_CONF 0x40
> +#define HSI2C_AUTO_CONF 0x44
> +#define HSI2C_TIMEOUT 0x48
> +#define HSI2C_MANUAL_CMD 0x4C
> +#define HSI2C_TRANS_STATUS 0x50
> +#define HSI2C_TIMING_HS1 0x54
> +#define HSI2C_TIMING_HS2 0x58
> +#define HSI2C_TIMING_HS3 0x5C
> +#define HSI2C_TIMING_FS1 0x60
> +#define HSI2C_TIMING_FS2 0x64
> +#define HSI2C_TIMING_FS3 0x68
> +#define HSI2C_TIMING_SLA 0x6C
> +#define HSI2C_ADDR 0x70
> +
> +/* I2C_CTL Register bits */
> +#define HSI2C_FUNC_MODE_I2C (1u << 0)
> +#define HSI2C_MASTER (1u << 3)
> +#define HSI2C_RXCHON (1u << 6)
> +#define HSI2C_TXCHON (1u << 7)
> +#define HSI2C_SW_RST (1u << 31)
> +
> +/* I2C_FIFO_CTL Register bits */
> +#define HSI2C_RXFIFO_EN (1u << 0)
> +#define HSI2C_TXFIFO_EN (1u << 1)
> +#define HSI2C_RXFIFO_TRIGGER_LEVEL(x) ((x) << 4)
> +#define HSI2C_TXFIFO_TRIGGER_LEVEL(x) ((x) << 16)
> +
> +/* As per user manual FIFO max depth is 64bytes */
> +#define HSI2C_FIFO_MAX 0x40
> +/* default trigger levels for Tx and Rx FIFOs */
> +#define HSI2C_DEF_TXFIFO_LVL (HSI2C_FIFO_MAX - 0x30)
> +#define HSI2C_DEF_RXFIFO_LVL (HSI2C_FIFO_MAX - 0x10)
> +
> +/* I2C_TRAILING_CTL Register bits */
> +#define HSI2C_TRAILING_COUNT (0xf)
> +
> +/* I2C_INT_EN Register bits */
> +#define HSI2C_INT_TX_ALMOSTEMPTY_EN (1u << 0)
> +#define HSI2C_INT_RX_ALMOSTFULL_EN (1u << 1)
> +#define HSI2C_INT_TRAILING_EN (1u << 6)
> +#define HSI2C_INT_I2C_EN (1u << 9)
> +
> +/* I2C_INT_STAT Register bits */
> +#define HSI2C_INT_TX_ALMOSTEMPTY (1u << 0)
> +#define HSI2C_INT_RX_ALMOSTFULL (1u << 1)
> +#define HSI2C_INT_TX_UNDERRUN (1u << 2)
> +#define HSI2C_INT_TX_OVERRUN (1u << 3)
> +#define HSI2C_INT_RX_UNDERRUN (1u << 4)
> +#define HSI2C_INT_RX_OVERRUN (1u << 5)
> +#define HSI2C_INT_TRAILING (1u << 6)
> +#define HSI2C_INT_I2C (1u << 9)
> +
> +/* I2C_FIFO_STAT Register bits */
> +#define HSI2C_RX_FIFO_EMPTY (1u << 24)
> +#define HSI2C_RX_FIFO_FULL (1u << 23)
> +#define HSI2C_RX_FIFO_LVL(x) ((x >> 16) & 0x7f)
> +#define HSI2C_TX_FIFO_EMPTY (1u << 8)
> +#define HSI2C_TX_FIFO_FULL (1u << 7)
> +#define HSI2C_TX_FIFO_LVL(x) ((x >> 0) & 0x7f)
> +
> +/* I2C_CONF Register bits */
> +#define HSI2C_AUTO_MODE (1u << 31)
> +#define HSI2C_10BIT_ADDR_MODE (1u << 30)
> +#define HSI2C_HS_MODE (1u << 29)
> +
> +/* I2C_AUTO_CONF Register bits */
> +#define HSI2C_READ_WRITE (1u << 16)
> +#define HSI2C_STOP_AFTER_TRANS (1u << 17)
> +#define HSI2C_MASTER_RUN (1u << 31)
> +
> +/* I2C_TIMEOUT Register bits */
> +#define HSI2C_TIMEOUT_EN (1u << 31)
> +#define HSI2C_TIMEOUT_MASK 0xff
> +
> +/* I2C_TRANS_STATUS register bits */
> +#define HSI2C_MASTER_BUSY (1u << 17)
> +#define HSI2C_SLAVE_BUSY (1u << 16)
> +#define HSI2C_TIMEOUT_AUTO (1u << 4)
> +#define HSI2C_NO_DEV (1u << 3)
> +#define HSI2C_NO_DEV_ACK (1u << 2)
> +#define HSI2C_TRANS_ABORT (1u << 1)
> +#define HSI2C_TRANS_DONE (1u << 0)
> +
> +/* I2C_ADDR register bits */
> +#define HSI2C_SLV_ADDR_SLV(x) ((x & 0x3ff) << 0)
> +#define HSI2C_SLV_ADDR_MAS(x) ((x & 0x3ff) << 10)
> +#define HSI2C_MASTER_ID(x) ((x & 0xff) << 24)
> +#define MASTER_ID(x) ((x & 0x7) + 0x08)
> +
> +/*
> + * Controller operating frequency, timing values for operation
> + * are calculated against this frequency
> + */
> +#define HSI2C_HS_TX_CLOCK 1000000
> +#define HSI2C_FS_TX_CLOCK 100000
> +#define HSI2C_HIGH_SPD 1
> +#define HSI2C_FAST_SPD 0
> +
> +#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000))
> +
> +struct exynos5_i2c {
> + struct i2c_adapter adap;
> + unsigned int suspended:1;
> +
> + struct i2c_msg *msg;
> + struct completion msg_complete;
> + unsigned int msg_ptr;
> +
> + unsigned int irq;
> +
> + void __iomem *regs;
> + struct clk *clk;
> + struct device *dev;
> + int state;
> +
> + spinlock_t lock; /* IRQ synchronization */
> +
> + /*
> + * Since the TRANS_DONE bit is cleared on read, and we may read it
> + * either during an IRQ or after a transaction, keep track of its
> + * state here.
> + */
> + int trans_done;
> +
> + /* Controller operating frequency */
> + unsigned int fs_clock;
> + unsigned int hs_clock;
> +
> + /*
> + * HSI2C Controller can operate in
> + * 1. High speed upto 3.4Mbps
> + * 2. Fast speed upto 1Mbps
> + */
> + int speed_mode;
> +};
> +
> +static const struct of_device_id exynos5_i2c_match[] = {
> + { .compatible = "samsung,exynos5-hsi2c" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
> +
> +static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
> +{
> + writel(readl(i2c->regs + HSI2C_INT_STATUS),
> + i2c->regs + HSI2C_INT_STATUS);
> +}
> +
> +/*
> + * exynos5_i2c_set_timing: updates the registers with appropriate
> + * timing values calculated
> + *
> + * Returns 0 on success, -EINVAL if the cycle length cannot
> + * be calculated.
> + */
> +static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode)
> +{
> + u32 i2c_timing_s1;
> + u32 i2c_timing_s2;
> + u32 i2c_timing_s3;
> + u32 i2c_timing_sla;
> + unsigned int t_start_su, t_start_hd;
> + unsigned int t_stop_su;
> + unsigned int t_data_su, t_data_hd;
> + unsigned int t_scl_l, t_scl_h;
> + unsigned int t_sr_release;
> + unsigned int t_ftl_cycle;
> + unsigned int clkin = clk_get_rate(i2c->clk);
> + unsigned int div, utemp0 = 0, utemp1 = 0, clk_cycle;
> + unsigned int op_clk = (mode == HSI2C_HIGH_SPD) ?
> + i2c->hs_clock : i2c->fs_clock;
> +
> + /*
> + * FPCLK / FI2C =
> + * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
> + * utemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
> + * utemp1 = (TSCLK_L + TSCLK_H + 2)
> + */
> + t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
> + utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle;
> +
> + /* CLK_DIV max is 256 */
> + for (div = 0; div < 256; div++) {
> + utemp1 = utemp0 / (div + 1);
> +
> + /*
> + * SCL_L and SCL_H each has max value of 255
> + * Hence, For the clk_cycle to the have right value
> + * utemp1 has to be less then 512 and more than 4.
> + */
> + if ((utemp1 < 512) && (utemp1 > 4)) {
> + clk_cycle = utemp1 - 2;
> + break;
> + } else if (div == 255) {
> + dev_warn(i2c->dev, "Failed to calculate divisor");
> + return -EINVAL;
> + }
> + }
> +
> + t_scl_l = clk_cycle / 2;
> + t_scl_h = clk_cycle / 2;
> + t_start_su = t_scl_l;
> + t_start_hd = t_scl_l;
> + t_stop_su = t_scl_l;
> + t_data_su = t_scl_l / 2;
> + t_data_hd = t_scl_l / 2;
> + t_sr_release = clk_cycle;
> +
> + i2c_timing_s1 = t_start_su << 24 | t_start_hd << 16 | t_stop_su << 8;
> + i2c_timing_s2 = t_data_su << 24 | t_scl_l << 8 | t_scl_h << 0;
> + i2c_timing_s3 = div << 16 | t_sr_release << 0;
> + i2c_timing_sla = t_data_hd << 0;
> +
> + dev_dbg(i2c->dev, "tSTART_SU: %X, tSTART_HD: %X, tSTOP_SU: %X\n",
> + t_start_su, t_start_hd, t_stop_su);
> + dev_dbg(i2c->dev, "tDATA_SU: %X, tSCL_L: %X, tSCL_H: %X\n",
> + t_data_su, t_scl_l, t_scl_h);
> + dev_dbg(i2c->dev, "nClkDiv: %X, tSR_RELEASE: %X\n",
> + div, t_sr_release);
> + dev_dbg(i2c->dev, "tDATA_HD: %X\n", t_data_hd);
> +
> + if (mode == HSI2C_HIGH_SPD) {
> + writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_HS1);
> + writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_HS2);
> + writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3);
> + } else {
> + writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_FS1);
> + writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_FS2);
> + writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_FS3);
> + }
> + writel(i2c_timing_sla, i2c->regs + HSI2C_TIMING_SLA);
> +
> + return 0;
> +}
> +
> +static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c)
> +{
> + /*
> + * Configure the Fast speed timing values
> + * Even the High Speed mode initially starts with Fast mode
> + */
> + if (exynos5_i2c_set_timing(i2c, HSI2C_FAST_SPD)) {
> + dev_err(i2c->dev, "HSI2C FS Clock set up failed\n");
> + return -EINVAL;
> + }
> +
> + /* configure the High speed timing values */
> + if (i2c->speed_mode == HSI2C_HIGH_SPD) {
> + if (exynos5_i2c_set_timing(i2c, HSI2C_HIGH_SPD)) {
> + dev_err(i2c->dev, "HSI2C HS Clock set up failed\n");
> + return -EINVAL;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * exynos5_i2c_init: configures the controller for I2C functionality
> + * Programs I2C controller for Master mode operation
> + */
> +static void exynos5_i2c_init(struct exynos5_i2c *i2c)
> +{
> + u32 i2c_conf = readl(i2c->regs + HSI2C_CONF);
> + u32 i2c_timeout = readl(i2c->regs + HSI2C_TIMEOUT);
> +
> + /* Clear to disable Timeout */
> + i2c_timeout &= ~HSI2C_TIMEOUT_EN;
> + writel(i2c_timeout, i2c->regs + HSI2C_TIMEOUT);
> +
> + writel((HSI2C_FUNC_MODE_I2C | HSI2C_MASTER),
> + i2c->regs + HSI2C_CTL);
> + writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL);
> +
> + if (i2c->speed_mode == HSI2C_HIGH_SPD) {
> + writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)),
> + i2c->regs + HSI2C_ADDR);
> + i2c_conf |= HSI2C_HS_MODE;
> + }
> +
> + writel(i2c_conf | HSI2C_AUTO_MODE, i2c->regs + HSI2C_CONF);
> +}
> +
> +static void exynos5_i2c_reset(struct exynos5_i2c *i2c)
> +{
> + u32 i2c_ctl;
> +
> + /* Set and clear the bit for reset */
> + i2c_ctl = readl(i2c->regs + HSI2C_CTL);
> + i2c_ctl |= HSI2C_SW_RST;
> + writel(i2c_ctl, i2c->regs + HSI2C_CTL);
> +
> + i2c_ctl = readl(i2c->regs + HSI2C_CTL);
> + i2c_ctl &= ~HSI2C_SW_RST;
> + writel(i2c_ctl, i2c->regs + HSI2C_CTL);
> +
> + /* We don't expect calculations to fail during the run */
> + exynos5_hsi2c_clock_setup(i2c);
> + /* Initialize the configure registers */
> + exynos5_i2c_init(i2c);
> +}
> +
> +/*
> + * exynos5_i2c_irq: top level IRQ servicing routine
> + *
> + * INT_STATUS registers gives the interrupt details. Further,
> + * FIFO_STATUS or TRANS_STATUS registers are to be check for detailed
> + * state of the bus.
> + */
> +static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
> +{
> + struct exynos5_i2c *i2c = dev_id;
> + u32 fifo_level, int_status, fifo_status, trans_status;
> + unsigned char byte;
> + int len = 0;
> +
> + i2c->state = -EINVAL;
> +
> + spin_lock(&i2c->lock);
> +
> + int_status = readl(i2c->regs + HSI2C_INT_STATUS);
> + writel(int_status, i2c->regs + HSI2C_INT_STATUS);
> + fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
> +
> + /* handle interrupt related to the transfer status */
> + if (int_status & HSI2C_INT_I2C) {
> + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
> + if (trans_status & HSI2C_NO_DEV_ACK) {
> + dev_dbg(i2c->dev, "No ACK from device\n");
> + i2c->state = -ENXIO;
> + goto stop;
> + } else if (trans_status & HSI2C_NO_DEV) {
> + dev_dbg(i2c->dev, "No device\n");
> + i2c->state = -ENXIO;
> + goto stop;
> + } else if (trans_status & HSI2C_TRANS_ABORT) {
> + dev_dbg(i2c->dev, "Deal with arbitration lose\n");
> + i2c->state = -EAGAIN;
> + goto stop;
> + } else if (trans_status & HSI2C_TIMEOUT_AUTO) {
> + dev_dbg(i2c->dev, "Accessing device timed out\n");
> + i2c->state = -EAGAIN;
> + goto stop;
> + } else if (trans_status & HSI2C_TRANS_DONE) {
> + i2c->trans_done = 1;
> + i2c->state = 0;
> + }
> + }
> +
> + if ((i2c->msg->flags & I2C_M_RD) && (int_status &
> + (HSI2C_INT_TRAILING | HSI2C_INT_RX_ALMOSTFULL))) {
> + fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
> + fifo_level = HSI2C_RX_FIFO_LVL(fifo_status);
> + len = min(fifo_level, i2c->msg->len - i2c->msg_ptr);
> +
> + while (len > 0) {
> + byte = (unsigned char)
> + readl(i2c->regs + HSI2C_RX_DATA);
> + i2c->msg->buf[i2c->msg_ptr++] = byte;
> + len--;
> + }
> + i2c->state = 0;
> + } else if (int_status & HSI2C_INT_TX_ALMOSTEMPTY) {
> + fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
> + fifo_level = HSI2C_TX_FIFO_LVL(fifo_status);
> +
> + len = HSI2C_FIFO_MAX - fifo_level;
> + if (len > (i2c->msg->len - i2c->msg_ptr))
> + len = i2c->msg->len - i2c->msg_ptr;
> +
> + while (len > 0) {
> + byte = i2c->msg->buf[i2c->msg_ptr++];
> + writel(byte, i2c->regs + HSI2C_TX_DATA);
> + len--;
> + }
> + i2c->state = 0;
> + }
> +
> + stop:
> + if ((i2c->trans_done && (i2c->msg->len == i2c->msg_ptr)) ||
> + (i2c->state < 0)) {
> + writel(0, i2c->regs + HSI2C_INT_ENABLE);
> + exynos5_i2c_clr_pend_irq(i2c);
> + complete(&i2c->msg_complete);
> + }
> +
> + spin_unlock(&i2c->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +/*
> + * exynos5_i2c_wait_bus_idle
> + *
> + * Wait for the bus to go idle, indicated by the MASTER_BUSY bit being
> + * cleared.
> + *
> + * Returns -EBUSY if the bus cannot be bought to idle
> + */
> +static int exynos5_i2c_wait_bus_idle(struct exynos5_i2c *i2c)
> +{
> + unsigned long stop_time;
> + u32 trans_status;
> +
> + /* wait for 100 milli seconds for the bus to be idle */
> + stop_time = jiffies + msecs_to_jiffies(100) + 1;
> + do {
> + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
> + if (!(trans_status & HSI2C_MASTER_BUSY))
> + return 0;
> +
> + usleep_range(50, 200);
> + } while (time_before(jiffies, stop_time));
> +
> + return -EBUSY;
> +}
> +
> +/*
> + * exynos5_i2c_message_start: Configures the bus and starts the xfer
> + * i2c: struct exynos5_i2c pointer for the current bus
> + * stop: Enables stop after transfer if set. Set for last transfer of
> + * in the list of messages.
> + *
> + * Configures the bus for read/write function
> + * Sets chip address to talk to, message length to be sent.
> + * Enables appropriate interrupts and sends start xfer command.
> + */
> +static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
> +{
> + u32 i2c_ctl;
> + u32 int_en = HSI2C_INT_I2C_EN;
> + u32 i2c_auto_conf = 0;
> + u32 fifo_ctl;
> + unsigned long flags;
> +
> + i2c_ctl = readl(i2c->regs + HSI2C_CTL);
> + i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
> + fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN;
> +
> + if (i2c->msg->flags & I2C_M_RD) {
> + i2c_ctl |= HSI2C_RXCHON;
> +
> + i2c_auto_conf = HSI2C_READ_WRITE;
> +
> + fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(HSI2C_DEF_TXFIFO_LVL);
> + int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN |
> + HSI2C_INT_TRAILING_EN);
> + } else {
> + i2c_ctl |= HSI2C_TXCHON;
> +
> + fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(HSI2C_DEF_RXFIFO_LVL);
> + int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN;
> + }
> +
> + writel(HSI2C_SLV_ADDR_MAS(i2c->msg->addr), i2c->regs + HSI2C_ADDR);
> +
> + writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL);
> + writel(i2c_ctl, i2c->regs + HSI2C_CTL);
> +
> +
> + /*
> + * Enable interrupts before starting the transfer so that we don't
> + * miss any INT_I2C interrupts.
> + */
> + spin_lock_irqsave(&i2c->lock, flags);
> + writel(int_en, i2c->regs + HSI2C_INT_ENABLE);
> +
> + if (stop == 1)
> + i2c_auto_conf |= HSI2C_STOP_AFTER_TRANS;
> + i2c_auto_conf |= i2c->msg->len;
> + i2c_auto_conf |= HSI2C_MASTER_RUN;
> + writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONF);
> + spin_unlock_irqrestore(&i2c->lock, flags);
> +}
> +
> +static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
> + struct i2c_msg *msgs, int stop)
> +{
> + unsigned long timeout;
> + int ret;
> +
> + i2c->msg = msgs;
> + i2c->msg_ptr = 0;
> + i2c->trans_done = 0;
> +
> + INIT_COMPLETION(i2c->msg_complete);
> +
> + exynos5_i2c_message_start(i2c, stop);
> +
> + timeout = wait_for_completion_timeout(&i2c->msg_complete,
> + EXYNOS5_I2C_TIMEOUT);
> + if (timeout == 0)
> + ret = -ETIMEDOUT;
> + else
> + ret = i2c->state;
> +
> + /*
> + * If this is the last message to be transfered (stop == 1)
> + * Then check if the bus can be brought back to idle.
> + */
> + if (ret == 0 && stop)
> + ret = exynos5_i2c_wait_bus_idle(i2c);
> +
> + if (ret < 0) {
> + exynos5_i2c_reset(i2c);
> + if (ret == -ETIMEDOUT)
> + dev_warn(i2c->dev, "%s timeout\n",
> + (msgs->flags & I2C_M_RD) ? "rx" : "tx");
> + }
> +
> + /* Return the state as in interrupt routine */
> + return ret;
> +}
> +
> +static int exynos5_i2c_xfer(struct i2c_adapter *adap,
> + struct i2c_msg *msgs, int num)
> +{
> + struct exynos5_i2c *i2c = (struct exynos5_i2c *)adap->algo_data;
> + int i = 0, ret = 0, stop = 0;
> +
> + if (i2c->suspended) {
> + dev_err(i2c->dev, "HS-I2C is not initialzed.\n");
> + return -EIO;
> + }
> +
> + clk_prepare_enable(i2c->clk);
> +
> + for (i = 0; i < num; i++, msgs++) {
> + stop = (i == num - 1);
> +
> + ret = exynos5_i2c_xfer_msg(i2c, msgs, stop);
> +
> + if (ret < 0)
> + goto out;
> + }
> +
> + if (i == num) {
> + ret = num;
> + } else {
> + /* Only one message, cannot access the device */
> + if (i == 1)
> + ret = -EREMOTEIO;
> + else
> + ret = i;
> +
> + dev_warn(i2c->dev, "xfer message failed\n");
> + }
> +
> + out:
> + clk_disable_unprepare(i2c->clk);
> + return ret;
> +}
> +
> +static u32 exynos5_i2c_func(struct i2c_adapter *adap)
> +{
> + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
> +}
> +
> +static const struct i2c_algorithm exynos5_i2c_algorithm = {
> + .master_xfer = exynos5_i2c_xfer,
> + .functionality = exynos5_i2c_func,
> +};
> +
> +static int exynos5_i2c_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct exynos5_i2c *i2c;
> + struct resource *mem;
> + unsigned int op_clock;
> + int ret;
> +
> + i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
> + if (!i2c) {
> + dev_err(&pdev->dev, "no memory for state\n");
> + return -ENOMEM;
> + }
> +
> + if (of_property_read_u32(np, "clock-frequency", &op_clock)) {
> + i2c->speed_mode = HSI2C_FAST_SPD;
> + i2c->fs_clock = HSI2C_FS_TX_CLOCK;
> + } else {
> + if (op_clock >= HSI2C_HS_TX_CLOCK) {
> + i2c->speed_mode = HSI2C_HIGH_SPD;
> + i2c->fs_clock = HSI2C_FS_TX_CLOCK;
> + i2c->hs_clock = op_clock;
> + } else {
> + i2c->speed_mode = HSI2C_FAST_SPD;
> + i2c->fs_clock = op_clock;
> + }
> + }
> +
> + strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name));
> + i2c->adap.owner = THIS_MODULE;
> + i2c->adap.algo = &exynos5_i2c_algorithm;
> + i2c->adap.retries = 3;
> +
> + i2c->dev = &pdev->dev;
> + i2c->clk = devm_clk_get(&pdev->dev, "hsi2c");
> + if (IS_ERR(i2c->clk)) {
> + dev_err(&pdev->dev, "cannot get clock\n");
> + return -ENOENT;
> + }
> +
> + clk_prepare_enable(i2c->clk);
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
> + if (IS_ERR(i2c->regs)) {
> + ret = PTR_ERR(i2c->regs);
> + goto err_clk;
> + }
> +
> + i2c->adap.dev.of_node = np;
> + i2c->adap.algo_data = i2c;
> + i2c->adap.dev.parent = &pdev->dev;
> +
> + /* Clear pending interrupts from u-boot or misc causes */
> + exynos5_i2c_clr_pend_irq(i2c);
> +
> + spin_lock_init(&i2c->lock);
> + init_completion(&i2c->msg_complete);
> +
> + i2c->irq = ret = platform_get_irq(pdev, 0);
> + if (ret <= 0) {
> + dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
> + ret = -EINVAL;
> + goto err_clk;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, i2c->irq, exynos5_i2c_irq,
> + IRQF_NO_SUSPEND | IRQF_ONESHOT,
> + dev_name(&pdev->dev), i2c);
> +
> + if (ret != 0) {
> + dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq);
> + goto err_clk;
> + }
> +
> + ret = exynos5_hsi2c_clock_setup(i2c);
> + if (ret)
> + goto err_clk;
> +
> + exynos5_i2c_init(i2c);
> +
> + ret = i2c_add_adapter(&i2c->adap);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to add bus to i2c core\n");
> + goto err_clk;
> + }
> +
> + of_i2c_register_devices(&i2c->adap);
> + platform_set_drvdata(pdev, i2c);
> +
> + clk_disable_unprepare(i2c->clk);
> +
> + return 0;
> +
> + err_clk:
> + clk_disable_unprepare(i2c->clk);
> + return ret;
> +}
> +
> +static int exynos5_i2c_remove(struct platform_device *pdev)
> +{
> + struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
> +
> + i2c_del_adapter(&i2c->adap);
> + clk_disable_unprepare(i2c->clk);
> +
> + return 0;
> +}
> +
> +static int exynos5_i2c_suspend_noirq(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
> +
> + i2c->suspended = 1;
> +
> + return 0;
> +}
> +
> +static int exynos5_i2c_resume_noirq(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
> + int ret = 0;
> +
> + clk_prepare_enable(i2c->clk);
> +
> + ret = exynos5_hsi2c_clock_setup(i2c);
> + if (ret) {
> + clk_disable_unprepare(i2c->clk);
> + return ret;
> + }
> +
> + exynos5_i2c_init(i2c);
> + clk_disable_unprepare(i2c->clk);
> + i2c->suspended = 0;
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq,
> + exynos5_i2c_resume_noirq);
> +
> +static struct platform_driver exynos5_i2c_driver = {
> + .probe = exynos5_i2c_probe,
> + .remove = exynos5_i2c_remove,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "exynos5-hsi2c",
> + .pm = &exynos5_i2c_dev_pm_ops,
> + .of_match_table = exynos5_i2c_match,
> + },
> +};
> +
> +module_platform_driver(exynos5_i2c_driver);
> +
> +MODULE_DESCRIPTION("Exynos5 HS-I2C Bus driver");
> +MODULE_AUTHOR("Naveen Krishna Chatradhi, <[email protected]>");
> +MODULE_AUTHOR("Taekgyun Ko, <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.10.4
Hello All,

Any updates on this patch please.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
Shine bright,
(: Nav :)