This is the start of the stable review cycle for the 4.19.44 release.
There are 113 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri 17 May 2019 09:04:35 AM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.44-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.44-rc1
Dexuan Cui <[email protected]>
PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary
Dexuan Cui <[email protected]>
PCI: hv: Add hv_pci_remove_slots() when we unload the driver
Dexuan Cui <[email protected]>
PCI: hv: Fix a memory leak in hv_eject_device_work()
Laurentiu Tudor <[email protected]>
powerpc/booke64: set RI in default MSR
Russell Currey <[email protected]>
powerpc/powernv/idle: Restore IAMR after idle
Rick Lindsley <[email protected]>
powerpc/book3s/64: check for NULL pointer in pgd_alloc()
Dan Carpenter <[email protected]>
drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl
Dan Carpenter <[email protected]>
drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl
Parthasarathy Bhuvaragan <[email protected]>
tipc: fix hanging clients using poll with EPOLLOUT flag
Paul Bolle <[email protected]>
isdn: bas_gigaset: use usb_fill_int_urb() properly
Jason Wang <[email protected]>
tuntap: synchronize through tfiles array instead of tun->numqueues
Jason Wang <[email protected]>
tuntap: fix dividing by zero in ebpf queue selection
Stephen Suryaputra <[email protected]>
vrf: sit mtu should not be updated when vrf netdev is the link
Hangbin Liu <[email protected]>
vlan: disable SIOCSHWTSTAMP in container
Paolo Abeni <[email protected]>
selinux: do not report error on connect(AF_UNSPEC)
YueHaibing <[email protected]>
packet: Fix error path in packet_init
Christophe Leroy <[email protected]>
net: ucc_geth - fix Oops when changing number of buffers in the ring
Thomas Bogendoerfer <[email protected]>
net: seeq: fix crash caused by not set dev.parent
Harini Katakam <[email protected]>
net: macb: Change interrupt and napi enable order in open
Corentin Labbe <[email protected]>
net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering
YueHaibing <[email protected]>
net: dsa: Fix error cleanup path in dsa_init_module
David Ahern <[email protected]>
ipv4: Fix raw socket lookup for local traffic
Hangbin Liu <[email protected]>
fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied
Laurentiu Tudor <[email protected]>
dpaa_eth: fix SG frame cleanup
Tobin C. Harding <[email protected]>
bridge: Fix error path for kobject_init_and_add()
Jarod Wilson <[email protected]>
bonding: fix arp_validate toggling in active-backup mode
Breno Leitao <[email protected]>
powerpc/64s: Include cpu header
Ritesh Raj Sarraf <[email protected]>
um: Don't hardcode path as it is architecture dependent
Nigel Croxon <[email protected]>
Don't jump to compute_result state from check_result state
Gustavo A. R. Silva <[email protected]>
rtlwifi: rtl8723ae: Fix missing break in switch statement
Petr Štetiar <[email protected]>
mwl8k: Fix rate_idx underflow
Wei Yongjun <[email protected]>
cw1200: fix missing unlock on error in cw1200_hw_scan()
Masami Hiramatsu <[email protected]>
x86/kprobes: Avoid kretprobe recursion bug
Dan Carpenter <[email protected]>
nfc: nci: Potential off by one in ->pipes[] array
Dan Carpenter <[email protected]>
NFC: nci: Add some bounds checking in nci_hci_cmd_received()
Jakub Kicinski <[email protected]>
net: strparser: partially revert "strparser: Call skb_unclone conditionally"
Jakub Kicinski <[email protected]>
net/tls: fix the IV leaks
Ido Schimmel <[email protected]>
mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw workqueue
Ido Schimmel <[email protected]>
mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw ordered workqueue
Ido Schimmel <[email protected]>
mlxsw: core: Do not use WQ_MEM_RECLAIM for EMAD workqueue
Ido Schimmel <[email protected]>
mlxsw: spectrum_switchdev: Add MDB entries in prepare phase
Andy Duan <[email protected]>
net: fec: manage ahb clock in runtime pm
Taehee Yoo <[email protected]>
netfilter: nf_tables: add missing ->release_ops() in error path of newrule()
Pablo Neira Ayuso <[email protected]>
netfilter: nf_tables: use-after-free in dynamic operations
Gustavo A. R. Silva <[email protected]>
usb: typec: Fix unchecked return value
Jan Kara <[email protected]>
mm/memory.c: fix modifying of page protection by insert_pfn()
Heiner Kallweit <[email protected]>
net: dsa: mv88e6xxx: fix few issues in mv88e6390x_port_set_cmode
Nicholas Piggin <[email protected]>
powerpc/smp: Fix NMI IPI xmon timeout
Nicholas Piggin <[email protected]>
powerpc/smp: Fix NMI IPI timeout
David Hildenbrand <[email protected]>
mm/memory_hotplug.c: drop memory device reference after find_memory_block()
Lijun Ou <[email protected]>
RDMA/hns: Bugfix for mapping user db
Pan Bian <[email protected]>
Input: synaptics-rmi4 - fix possible double free
Paul Kocialkowski <[email protected]>
drm/sun4i: Unbind components before releasing DRM and memory
Daniel Gomez <[email protected]>
spi: ST ST95HF NFC: declare missing of table
Daniel Gomez <[email protected]>
spi: Micrel eth switch: declare missing of table
Tigran Tadevosyan <[email protected]>
ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled
Lucas Stach <[email protected]>
drm/imx: don't skip DP channel disable for background plane
Lucas Stach <[email protected]>
gpu: ipu-v3: dp: fix CSC handling
Andrei Vagin <[email protected]>
netfilter: fix nf_l4proto_log_invalid to log invalid packets
Po-Hsu Lin <[email protected]>
selftests/net: correct the return value for run_netsocktests
Paul Kocialkowski <[email protected]>
drm/sun4i: Fix component unbinding and component master deletion
Paul Kocialkowski <[email protected]>
drm/sun4i: Set device driver data at bind time for use in unbind
Arnd Bergmann <[email protected]>
s390: ctcm: fix ctcm_new_device error return code
Petr Štetiar <[email protected]>
MIPS: perf: ath79: Fix perfcount IRQ assignment
Dan Carpenter <[email protected]>
netfilter: nf_tables: prevent shift wrap in nft_chain_parse_hook()
Florian Westphal <[email protected]>
netfilter: ctnetlink: don't use conntrack/expect object addresses as id
Julian Anastasov <[email protected]>
ipvs: do not schedule icmp errors from tunnels
Florian Westphal <[email protected]>
selftests: netfilter: check icmp pkttoobig errors are set as related
Dan Williams <[email protected]>
init: initialize jump labels before command line option parsing
Johannes Weiner <[email protected]>
mm: fix inactive list balancing between NUMA nodes and cgroups
Christoph Hellwig <[email protected]>
scsi: aic7xxx: fix EISA support
Claudiu Manoil <[email protected]>
ocelot: Don't sleep in atomic context (irqs_disabled())
Tony Camuso <[email protected]>
ipmi: ipmi_si_hardcode.c: init si_type array to fix a crash
Rikard Falkeborn <[email protected]>
tools lib traceevent: Fix missing equality check for strcmp
Vitaly Kuznetsov <[email protected]>
KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing
Paolo Bonzini <[email protected]>
KVM: fix spectrev1 gadgets
Jian-Hong Pan <[email protected]>
x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T
Sami Tolvanen <[email protected]>
x86/build/lto: Fix truncated .bss with -fdata-sections
Harald Freudenberger <[email protected]>
s390/pkey: add one more argument space for debug feature entry
David Francis <[email protected]>
drm/amd/display: If one stream full updates, full update all planes
Marc Dionne <[email protected]>
afs: Unlock pages for __pagevec_release()
Colin Ian King <[email protected]>
qede: fix write to free'd pointer error and double free of ptp
Colin Ian King <[email protected]>
vxge: fix return of a free'd memblock on a failed dma mapping
Tetsuo Handa <[email protected]>
mISDN: Check address length before reading address family
David Ahern <[email protected]>
selftests: fib_tests: Fix 'Command line is not complete' errors
Neil Armstrong <[email protected]>
clocksource/drivers/oxnas: Fix OX820 compatible
Arnd Bergmann <[email protected]>
clocksource/drivers/npcm: select TIMER_OF
Martin Leung <[email protected]>
drm/amd/display: extending AUX SW Timeout
Martin Schwidefsky <[email protected]>
s390/3270: fix lockdep false positive on view->lock
Li RongQing <[email protected]>
libnvdimm/pmem: fix a possible OOB access when read and write pmem
Sunil Dutt <[email protected]>
nl80211: Add NL80211_FLAG_CLEAR_SKB flag for other NL commands
Felix Fietkau <[email protected]>
mac80211: fix memory accounting with A-MSDU aggregation
Ilan Peer <[email protected]>
cfg80211: Handle WMM rules in regulatory domain intersection
Andrei Otcheretianski <[email protected]>
mac80211: Increase MAX_MSG_LEN
Felix Fietkau <[email protected]>
mac80211: fix unaligned access in mesh table hash function
Peter Oberparleiter <[email protected]>
s390/dasd: Fix capacity calculation for large volumes
Aditya Pakki <[email protected]>
libnvdimm/btt: Fix a kmemdup failure check
Dmitry Torokhov <[email protected]>
HID: input: add mapping for "Toggle Display" key
Dmitry Torokhov <[email protected]>
HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys
Dmitry Torokhov <[email protected]>
HID: input: add mapping for Expose/Overview key
Kangjie Lu <[email protected]>
libnvdimm/namespace: Fix a potential NULL pointer dereference
Dan Williams <[email protected]>
acpi/nfit: Always dump _DSM output payload
Sven Van Asbroeck <[email protected]>
iio: adc: xilinx: prevent touching unclocked h/w on remove
Sven Van Asbroeck <[email protected]>
iio: adc: xilinx: fix potential use-after-free on probe
Sven Van Asbroeck <[email protected]>
iio: adc: xilinx: fix potential use-after-free on remove
Johan Hovold <[email protected]>
USB: serial: fix unthrottle races
Hans de Goede <[email protected]>
virt: vbox: Sanity-check parameter types for hgcm-calls coming from userspace
Andrea Parri <[email protected]>
kernfs: fix barrier usage in __kernfs_new_node()
Stefan Wahren <[email protected]>
hwmon: (pwm-fan) Disable PWM if fetching cooling data fails
Mario Limonciello <[email protected]>
platform/x86: dell-laptop: fix rfkill functionality
Jiaxun Yang <[email protected]>
platform/x86: thinkpad_acpi: Disable Bluetooth for some machines
Gustavo A. R. Silva <[email protected]>
platform/x86: sony-laptop: Fix unintentional fall-through
Jens Axboe <[email protected]>
bfq: update internal depth state when queue depth changes
-------------
Diffstat:
Makefile | 4 +-
arch/arm/kernel/head-nommu.S | 2 +-
arch/mips/ath79/setup.c | 6 -
arch/powerpc/include/asm/book3s/64/pgalloc.h | 3 +
arch/powerpc/include/asm/reg_booke.h | 2 +-
arch/powerpc/kernel/idle_book3s.S | 20 ++
arch/powerpc/kernel/security.c | 1 +
arch/powerpc/kernel/smp.c | 90 ++-----
arch/um/drivers/port_user.c | 2 +-
arch/x86/kernel/kprobes/core.c | 22 +-
arch/x86/kernel/reboot.c | 21 ++
arch/x86/kernel/vmlinux.lds.S | 2 +-
arch/x86/kvm/lapic.c | 4 +-
arch/x86/kvm/trace.h | 4 +-
block/bfq-iosched.c | 8 +-
block/blk-mq.c | 2 +
drivers/acpi/nfit/core.c | 12 +-
drivers/char/ipmi/ipmi_si_hardcode.c | 2 +
drivers/clocksource/Kconfig | 1 +
drivers/clocksource/timer-oxnas-rps.c | 2 +-
drivers/gpu/drm/amd/display/dc/core/dc.c | 19 ++
drivers/gpu/drm/amd/display/dc/dc.h | 3 +
drivers/gpu/drm/amd/display/dc/dce/dce_aux.c | 9 +-
drivers/gpu/drm/amd/display/dc/dce/dce_aux.h | 6 +-
drivers/gpu/drm/imx/ipuv3-crtc.c | 2 +-
drivers/gpu/drm/sun4i/sun4i_drv.c | 7 +
drivers/gpu/ipu-v3/ipu-dp.c | 12 +-
drivers/hid/hid-input.c | 14 +
drivers/hwmon/pwm-fan.c | 2 +-
drivers/iio/adc/xilinx-xadc-core.c | 3 +-
drivers/infiniband/hw/hns/hns_roce_qp.c | 2 +-
drivers/input/rmi4/rmi_driver.c | 6 +-
drivers/irqchip/irq-ath79-misc.c | 11 +
drivers/isdn/gigaset/bas-gigaset.c | 9 +-
drivers/isdn/mISDN/socket.c | 4 +-
drivers/md/raid5.c | 19 +-
drivers/net/bonding/bond_options.c | 7 -
drivers/net/dsa/mv88e6xxx/port.c | 24 +-
drivers/net/ethernet/cadence/macb_main.c | 6 +-
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
drivers/net/ethernet/freescale/fec_main.c | 30 ++-
drivers/net/ethernet/freescale/ucc_geth_ethtool.c | 8 +-
drivers/net/ethernet/mellanox/mlxsw/core.c | 6 +-
.../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 2 +-
drivers/net/ethernet/mscc/ocelot.c | 2 +-
drivers/net/ethernet/neterion/vxge/vxge-config.c | 1 +
drivers/net/ethernet/qlogic/qede/qede_ptp.c | 7 +-
drivers/net/ethernet/seeq/sgiseeq.c | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +
drivers/net/phy/spi_ks8995.c | 9 +
drivers/net/tun.c | 14 +-
drivers/net/wireless/marvell/mwl8k.c | 13 +-
.../net/wireless/realtek/rtlwifi/rtl8723ae/hw.c | 1 +
drivers/net/wireless/st/cw1200/scan.c | 5 +-
drivers/nfc/st95hf/core.c | 7 +
drivers/nvdimm/btt_devs.c | 18 +-
drivers/nvdimm/namespace_devs.c | 5 +-
drivers/nvdimm/pmem.c | 8 +-
drivers/pci/controller/pci-hyperv.c | 23 ++
drivers/platform/x86/dell-laptop.c | 6 +-
drivers/platform/x86/sony-laptop.c | 8 +-
drivers/platform/x86/thinkpad_acpi.c | 72 +++++-
drivers/s390/block/dasd_eckd.c | 6 +-
drivers/s390/char/con3270.c | 2 +-
drivers/s390/char/fs3270.c | 3 +-
drivers/s390/char/raw3270.c | 3 +-
drivers/s390/char/raw3270.h | 4 +-
drivers/s390/char/tty3270.c | 3 +-
drivers/s390/crypto/pkey_api.c | 3 +-
drivers/s390/net/ctcm_main.c | 1 +
drivers/scsi/aic7xxx/aic7770_osm.c | 1 +
drivers/scsi/aic7xxx/aic7xxx.h | 1 +
drivers/scsi/aic7xxx/aic7xxx_osm.c | 10 +-
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c | 1 +
drivers/usb/serial/generic.c | 39 ++-
drivers/usb/typec/typec_wcove.c | 9 +-
drivers/virt/fsl_hypervisor.c | 29 ++-
drivers/virt/vboxguest/vboxguest_core.c | 31 +++
fs/afs/write.c | 1 +
fs/kernfs/dir.c | 5 +-
include/linux/efi.h | 7 +-
include/linux/elevator.h | 1 +
include/linux/kvm_host.h | 10 +-
include/net/netfilter/nf_conntrack.h | 2 +
include/net/nfc/nci_core.h | 2 +-
init/main.c | 4 +-
mm/memory.c | 11 +-
mm/memory_hotplug.c | 1 +
mm/vmscan.c | 29 +--
net/8021q/vlan_dev.c | 4 +-
net/bridge/br_if.c | 13 +-
net/core/fib_rules.c | 6 +-
net/dsa/dsa.c | 11 +-
net/ipv4/raw.c | 4 +-
net/ipv6/sit.c | 2 +-
net/mac80211/mesh_pathtbl.c | 2 +-
net/mac80211/trace_msg.h | 7 +-
net/mac80211/tx.c | 3 +
net/netfilter/ipvs/ip_vs_core.c | 2 +-
net/netfilter/nf_conntrack_core.c | 35 +++
net/netfilter/nf_conntrack_netlink.c | 34 ++-
net/netfilter/nf_conntrack_proto.c | 2 +-
net/netfilter/nf_tables_api.c | 11 +-
net/nfc/nci/hci.c | 8 +
net/packet/af_packet.c | 25 +-
net/strparser/strparser.c | 12 +-
net/tipc/socket.c | 4 +-
net/tls/tls_device.c | 5 +-
net/wireless/nl80211.c | 18 +-
net/wireless/reg.c | 39 +++
security/selinux/hooks.c | 8 +-
tools/lib/traceevent/event-parse.c | 2 +-
tools/testing/selftests/net/fib_tests.sh | 94 +++----
tools/testing/selftests/net/run_netsocktests | 2 +-
tools/testing/selftests/netfilter/Makefile | 2 +-
.../selftests/netfilter/conntrack_icmp_related.sh | 283 +++++++++++++++++++++
virt/kvm/irqchip.c | 5 +-
virt/kvm/kvm_main.c | 6 +-
118 files changed, 1113 insertions(+), 380 deletions(-)
[ Upstream commit 08a75a887ee46828b54600f4bb7068d872a5edd5 ]
The support added for regulatory WMM rules did not handle
the case of regulatory domain intersections. Fix it.
Signed-off-by: Ilan Peer <[email protected]>
Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/reg.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 8002ace7c9f65..8a47297ff206d 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1287,6 +1287,16 @@ reg_intersect_dfs_region(const enum nl80211_dfs_regions dfs_region1,
return dfs_region1;
}
+static void reg_wmm_rules_intersect(const struct ieee80211_wmm_ac *wmm_ac1,
+ const struct ieee80211_wmm_ac *wmm_ac2,
+ struct ieee80211_wmm_ac *intersect)
+{
+ intersect->cw_min = max_t(u16, wmm_ac1->cw_min, wmm_ac2->cw_min);
+ intersect->cw_max = max_t(u16, wmm_ac1->cw_max, wmm_ac2->cw_max);
+ intersect->cot = min_t(u16, wmm_ac1->cot, wmm_ac2->cot);
+ intersect->aifsn = max_t(u8, wmm_ac1->aifsn, wmm_ac2->aifsn);
+}
+
/*
* Helper for regdom_intersect(), this does the real
* mathematical intersection fun
@@ -1301,6 +1311,8 @@ static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
struct ieee80211_freq_range *freq_range;
const struct ieee80211_power_rule *power_rule1, *power_rule2;
struct ieee80211_power_rule *power_rule;
+ const struct ieee80211_wmm_rule *wmm_rule1, *wmm_rule2;
+ struct ieee80211_wmm_rule *wmm_rule;
u32 freq_diff, max_bandwidth1, max_bandwidth2;
freq_range1 = &rule1->freq_range;
@@ -1311,6 +1323,10 @@ static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
power_rule2 = &rule2->power_rule;
power_rule = &intersected_rule->power_rule;
+ wmm_rule1 = &rule1->wmm_rule;
+ wmm_rule2 = &rule2->wmm_rule;
+ wmm_rule = &intersected_rule->wmm_rule;
+
freq_range->start_freq_khz = max(freq_range1->start_freq_khz,
freq_range2->start_freq_khz);
freq_range->end_freq_khz = min(freq_range1->end_freq_khz,
@@ -1354,6 +1370,29 @@ static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
intersected_rule->dfs_cac_ms = max(rule1->dfs_cac_ms,
rule2->dfs_cac_ms);
+ if (rule1->has_wmm && rule2->has_wmm) {
+ u8 ac;
+
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+ reg_wmm_rules_intersect(&wmm_rule1->client[ac],
+ &wmm_rule2->client[ac],
+ &wmm_rule->client[ac]);
+ reg_wmm_rules_intersect(&wmm_rule1->ap[ac],
+ &wmm_rule2->ap[ac],
+ &wmm_rule->ap[ac]);
+ }
+
+ intersected_rule->has_wmm = true;
+ } else if (rule1->has_wmm) {
+ *wmm_rule = *wmm_rule1;
+ intersected_rule->has_wmm = true;
+ } else if (rule2->has_wmm) {
+ *wmm_rule = *wmm_rule2;
+ intersected_rule->has_wmm = true;
+ } else {
+ intersected_rule->has_wmm = false;
+ }
+
if (!is_valid_reg_rule(intersected_rule))
return -EINVAL;
--
2.20.1
[ Upstream commit 78be2d21cc1cd3069c6138dcfecec62583130171 ]
Looks that 100 chars isn't enough for messages, as we keep getting
warnings popping from different places due to message shortening.
Instead of trying to shorten the prints, just increase the buffer size.
Signed-off-by: Andrei Otcheretianski <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/trace_msg.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/trace_msg.h b/net/mac80211/trace_msg.h
index 366b9e6f043e2..40141df09f255 100644
--- a/net/mac80211/trace_msg.h
+++ b/net/mac80211/trace_msg.h
@@ -1,4 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Portions of this file
+ * Copyright (C) 2019 Intel Corporation
+ */
+
#ifdef CONFIG_MAC80211_MESSAGE_TRACING
#if !defined(__MAC80211_MSG_DRIVER_TRACE) || defined(TRACE_HEADER_MULTI_READ)
@@ -11,7 +16,7 @@
#undef TRACE_SYSTEM
#define TRACE_SYSTEM mac80211_msg
-#define MAX_MSG_LEN 100
+#define MAX_MSG_LEN 120
DECLARE_EVENT_CLASS(mac80211_msg_event,
TP_PROTO(struct va_format *vaf),
--
2.20.1
[ Upstream commit d6db02a88a4aaa1cd7105137c67ddec7f3bdbc05 ]
This commit adds NL80211_FLAG_CLEAR_SKB flag to other NL commands
that carry key data to ensure they do not stick around on heap
after the SKB is freed.
Also introduced this flag for NL80211_CMD_VENDOR as there are sub
commands which configure the keys.
Signed-off-by: Sunil Dutt <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 295cd8d5554f6..048e004ed0ee8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -13392,7 +13392,8 @@ static const struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
- NL80211_FLAG_NEED_RTNL,
+ NL80211_FLAG_NEED_RTNL |
+ NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_DEAUTHENTICATE,
@@ -13443,7 +13444,8 @@ static const struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
- NL80211_FLAG_NEED_RTNL,
+ NL80211_FLAG_NEED_RTNL |
+ NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_UPDATE_CONNECT_PARAMS,
@@ -13451,7 +13453,8 @@ static const struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
- NL80211_FLAG_NEED_RTNL,
+ NL80211_FLAG_NEED_RTNL |
+ NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_DISCONNECT,
@@ -13480,7 +13483,8 @@ static const struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
- NL80211_FLAG_NEED_RTNL,
+ NL80211_FLAG_NEED_RTNL |
+ NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_DEL_PMKSA,
@@ -13832,7 +13836,8 @@ static const struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_WIPHY |
- NL80211_FLAG_NEED_RTNL,
+ NL80211_FLAG_NEED_RTNL |
+ NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_SET_QOS_MAP,
@@ -13887,7 +13892,8 @@ static const struct genl_ops nl80211_ops[] = {
.doit = nl80211_set_pmk,
.policy = nl80211_policy,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
- NL80211_FLAG_NEED_RTNL,
+ NL80211_FLAG_NEED_RTNL |
+ NL80211_FLAG_CLEAR_SKB,
},
{
.cmd = NL80211_CMD_DEL_PMK,
--
2.20.1
[ Upstream commit f5a9ed867c83875546c9aadd4ed8e785e9adcc3c ]
For our component-backed driver to be properly removed, we need to
delete the component master in sun4i_drv_remove and make sure to call
component_unbind_all in the master's unbind so that all components are
unbound when the master is.
Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_drv.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 7cac01c72c027..62703630090aa 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -160,6 +160,8 @@ static void sun4i_drv_unbind(struct device *dev)
drm_mode_config_cleanup(drm);
of_reserved_mem_device_release(dev);
drm_dev_put(drm);
+
+ component_unbind_all(dev, NULL);
}
static const struct component_master_ops sun4i_drv_master_ops = {
@@ -407,6 +409,8 @@ static int sun4i_drv_probe(struct platform_device *pdev)
static int sun4i_drv_remove(struct platform_device *pdev)
{
+ component_master_del(&pdev->dev, &sun4i_drv_master_ops);
+
return 0;
}
--
2.20.1
[ Upstream commit f4bbebf8e7eb4d294b040ab2d2ba71e70e69b930 ]
[Why]
AUX takes longer to reply when using active DP-DVI dongle on some asics
resulting in up to 2000+ us edid read (timeout).
[How]
1. Adjust AUX poll to match spec
2. Extend the SW timeout. This does not affect normal
operation since we exit the loop as soon as AUX acks.
Signed-off-by: Martin Leung <[email protected]>
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Joshua Aberback <[email protected]>
Acked-by: Leo Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dce/dce_aux.c | 9 ++++++---
drivers/gpu/drm/amd/display/dc/dce/dce_aux.h | 6 +++---
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c
index 3f5b2e6f7553f..df936edac5c76 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c
@@ -189,6 +189,12 @@ static void submit_channel_request(
1,
0);
}
+
+ REG_UPDATE(AUX_INTERRUPT_CONTROL, AUX_SW_DONE_ACK, 1);
+
+ REG_WAIT(AUX_SW_STATUS, AUX_SW_DONE, 0,
+ 10, aux110->timeout_period/10);
+
/* set the delay and the number of bytes to write */
/* The length include
@@ -241,9 +247,6 @@ static void submit_channel_request(
}
}
- REG_UPDATE(AUX_INTERRUPT_CONTROL, AUX_SW_DONE_ACK, 1);
- REG_WAIT(AUX_SW_STATUS, AUX_SW_DONE, 0,
- 10, aux110->timeout_period/10);
REG_UPDATE(AUX_SW_CONTROL, AUX_SW_GO, 1);
}
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.h b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.h
index f7caab85dc801..2c6f50b4245a4 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.h
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.h
@@ -69,11 +69,11 @@ enum { /* This is the timeout as defined in DP 1.2a,
* at most within ~240usec. That means,
* increasing this timeout will not affect normal operation,
* and we'll timeout after
- * SW_AUX_TIMEOUT_PERIOD_MULTIPLIER * AUX_TIMEOUT_PERIOD = 1600usec.
+ * SW_AUX_TIMEOUT_PERIOD_MULTIPLIER * AUX_TIMEOUT_PERIOD = 2400usec.
* This timeout is especially important for
- * resume from S3 and CTS.
+ * converters, resume from S3, and CTS.
*/
- SW_AUX_TIMEOUT_PERIOD_MULTIPLIER = 4
+ SW_AUX_TIMEOUT_PERIOD_MULTIPLIER = 6
};
struct aux_engine_dce110 {
struct aux_engine base;
--
2.20.1
[ Upstream commit a885bcfd152f97b25005298ab2d6b741aed9b49c ]
The intended behavior of function ipmi_hardcode_init_one() is to default
to kcs interface when no type argument is presented when initializing
ipmi with hard coded addresses.
However, the array of char pointers allocated on the stack by function
ipmi_hardcode_init() was not inited to zeroes, so it contained stack
debris.
Consequently, passing the cruft stored in this array to function
ipmi_hardcode_init_one() caused a crash when it was unable to detect
that the char * being passed was nonsense and tried to access the
address specified by the bogus pointer.
The fix is simply to initialize the si_type array to zeroes, so if
there were no type argument given to at the command line, function
ipmi_hardcode_init_one() could properly default to the kcs interface.
Signed-off-by: Tony Camuso <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/ipmi/ipmi_si_hardcode.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/char/ipmi/ipmi_si_hardcode.c b/drivers/char/ipmi/ipmi_si_hardcode.c
index 9ae2405c28bbd..0c28e872ad3ae 100644
--- a/drivers/char/ipmi/ipmi_si_hardcode.c
+++ b/drivers/char/ipmi/ipmi_si_hardcode.c
@@ -200,6 +200,8 @@ void __init ipmi_hardcode_init(void)
char *str;
char *si_type[SI_MAX_PARMS];
+ memset(si_type, 0, sizeof(si_type));
+
/* Parse out the si_type string into its components. */
str = si_type_str;
if (*str != '\0') {
--
2.20.1
[ Upstream commit 2f23a2a768bee7ad2ff1e9527c3f7e279e794a46 ]
Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.
Before this patch:
modinfo drivers/net/phy/spi_ks8995.ko | grep alias
alias: spi:ksz8795
alias: spi:ksz8864
alias: spi:ks8995
After this patch:
modinfo drivers/net/phy/spi_ks8995.ko | grep alias
alias: spi:ksz8795
alias: spi:ksz8864
alias: spi:ks8995
alias: of:N*T*Cmicrel,ksz8795C*
alias: of:N*T*Cmicrel,ksz8795
alias: of:N*T*Cmicrel,ksz8864C*
alias: of:N*T*Cmicrel,ksz8864
alias: of:N*T*Cmicrel,ks8995C*
alias: of:N*T*Cmicrel,ks8995
Reported-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Daniel Gomez <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/spi_ks8995.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c
index f17b3441779bf..d8ea4147dfe78 100644
--- a/drivers/net/phy/spi_ks8995.c
+++ b/drivers/net/phy/spi_ks8995.c
@@ -162,6 +162,14 @@ static const struct spi_device_id ks8995_id[] = {
};
MODULE_DEVICE_TABLE(spi, ks8995_id);
+static const struct of_device_id ks8895_spi_of_match[] = {
+ { .compatible = "micrel,ks8995" },
+ { .compatible = "micrel,ksz8864" },
+ { .compatible = "micrel,ksz8795" },
+ { },
+ };
+MODULE_DEVICE_TABLE(of, ks8895_spi_of_match);
+
static inline u8 get_chip_id(u8 val)
{
return (val >> ID1_CHIPID_S) & ID1_CHIPID_M;
@@ -529,6 +537,7 @@ static int ks8995_remove(struct spi_device *spi)
static struct spi_driver ks8995_driver = {
.driver = {
.name = "spi-ks8995",
+ .of_match_table = of_match_ptr(ks8895_spi_of_match),
},
.probe = ks8995_probe,
.remove = ks8995_remove,
--
2.20.1
From: Mario Limonciello <[email protected]>
commit 6cc13c28da5beee0f706db6450e190709700b34a upstream.
When converting the driver two arguments were transposed leading
to rfkill not working.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201427
Reported-by: Pepijn de Vos <[email protected]>
Fixes: 549b49 ("platform/x86: dell-smbios: Introduce dispatcher for SMM calls")
Signed-off-by: Mario Limonciello <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Cc: <[email protected]> # 4.14.x
Signed-off-by: Darren Hart (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/dell-laptop.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -532,7 +532,7 @@ static void dell_rfkill_query(struct rfk
return;
}
- dell_fill_request(&buffer, 0, 0x2, 0, 0);
+ dell_fill_request(&buffer, 0x2, 0, 0, 0);
ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
hwswitch = buffer.output[1];
@@ -563,7 +563,7 @@ static int dell_debugfs_show(struct seq_
return ret;
status = buffer.output[1];
- dell_fill_request(&buffer, 0, 0x2, 0, 0);
+ dell_fill_request(&buffer, 0x2, 0, 0, 0);
hwswitch_ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
if (hwswitch_ret)
return hwswitch_ret;
@@ -648,7 +648,7 @@ static void dell_update_rfkill(struct wo
if (ret != 0)
return;
- dell_fill_request(&buffer, 0, 0x2, 0, 0);
+ dell_fill_request(&buffer, 0x2, 0, 0, 0);
ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
if (ret == 0 && (status & BIT(0)))
[ Upstream commit 89c02e69fc5245f8a2f34b58b42d43a737af1a5e ]
Right now we are using find_memory_block() to get the node id for the
pfn range to online. We are missing to drop a reference to the memory
block device. While the device still gets unregistered via
device_unregister(), resulting in no user visible problem, the device is
never released via device_release(), resulting in a memory leak. Fix
that by properly using a put_device().
Link: http://lkml.kernel.org/r/[email protected]
Fixes: d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug")
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Reviewed-by: Wei Yang <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Pankaj Gupta <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Qian Cai <[email protected]>
Cc: Arun KS <[email protected]>
Cc: Mathieu Malaterre <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/memory_hotplug.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 156991edec2a8..af67355622159 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -901,6 +901,7 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
*/
mem = find_memory_block(__pfn_to_section(pfn));
nid = mem->nid;
+ put_device(&mem->dev);
/* associate pfn range with the zone */
zone = move_pfn_range(online_type, nid, pfn, nr_pages);
--
2.20.1
From: Andrea Parri <[email protected]>
commit 998267900cee901c5d1dfa029a6304d00acbc29f upstream.
smp_mb__before_atomic() can not be applied to atomic_set(). Remove the
barrier and rely on RELEASE synchronization.
Fixes: ba16b2846a8c6 ("kernfs: add an API to get kernfs node from inode number")
Cc: [email protected]
Signed-off-by: Andrea Parri <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/kernfs/dir.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/fs/kernfs/dir.c
+++ b/fs/kernfs/dir.c
@@ -650,11 +650,10 @@ static struct kernfs_node *__kernfs_new_
kn->id.generation = gen;
/*
- * set ino first. This barrier is paired with atomic_inc_not_zero in
+ * set ino first. This RELEASE is paired with atomic_inc_not_zero in
* kernfs_find_and_get_node_by_ino
*/
- smp_mb__before_atomic();
- atomic_set(&kn->count, 1);
+ atomic_set_release(&kn->count, 1);
atomic_set(&kn->active, KN_DEACTIVATED_BIAS);
RB_CLEAR_NODE(&kn->rb);
From: Johan Hovold <[email protected]>
commit 3f5edd58d040bfa4b74fb89bc02f0bc6b9cd06ab upstream.
Fix two long-standing bugs which could potentially lead to memory
corruption or leave the port throttled until it is reopened (on weakly
ordered systems), respectively, when read-URB completion races with
unthrottle().
First, the URB must not be marked as free before processing is complete
to prevent it from being submitted by unthrottle() on another CPU.
CPU 1 CPU 2
================ ================
complete() unthrottle()
process_urb();
smp_mb__before_atomic();
set_bit(i, free); if (test_and_clear_bit(i, free))
submit_urb();
Second, the URB must be marked as free before checking the throttled
flag to prevent unthrottle() on another CPU from failing to observe that
the URB needs to be submitted if complete() sees that the throttled flag
is set.
CPU 1 CPU 2
================ ================
complete() unthrottle()
set_bit(i, free); throttled = 0;
smp_mb__after_atomic(); smp_mb();
if (throttled) if (test_and_clear_bit(i, free))
return; submit_urb();
Note that test_and_clear_bit() only implies barriers when the test is
successful. To handle the case where the URB is still in use an explicit
barrier needs to be added to unthrottle() for the second race condition.
Fixes: d83b405383c9 ("USB: serial: add support for multiple read urbs")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/generic.c | 39 ++++++++++++++++++++++++++++++++-------
1 file changed, 32 insertions(+), 7 deletions(-)
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -376,6 +376,7 @@ void usb_serial_generic_read_bulk_callba
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
+ bool stopped = false;
int status = urb->status;
int i;
@@ -383,33 +384,51 @@ void usb_serial_generic_read_bulk_callba
if (urb == port->read_urbs[i])
break;
}
- set_bit(i, &port->read_urbs_free);
dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i,
urb->actual_length);
switch (status) {
case 0:
+ usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+ data);
+ port->serial->type->process_read_urb(urb);
break;
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&port->dev, "%s - urb stopped: %d\n",
__func__, status);
- return;
+ stopped = true;
+ break;
case -EPIPE:
dev_err(&port->dev, "%s - urb stopped: %d\n",
__func__, status);
- return;
+ stopped = true;
+ break;
default:
dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
__func__, status);
- goto resubmit;
+ break;
}
- usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
- port->serial->type->process_read_urb(urb);
+ /*
+ * Make sure URB processing is done before marking as free to avoid
+ * racing with unthrottle() on another CPU. Matches the barriers
+ * implied by the test_and_clear_bit() in
+ * usb_serial_generic_submit_read_urb().
+ */
+ smp_mb__before_atomic();
+ set_bit(i, &port->read_urbs_free);
+ /*
+ * Make sure URB is marked as free before checking the throttled flag
+ * to avoid racing with unthrottle() on another CPU. Matches the
+ * smp_mb() in unthrottle().
+ */
+ smp_mb__after_atomic();
+
+ if (stopped)
+ return;
-resubmit:
/* Throttle the device if requested by tty */
spin_lock_irqsave(&port->lock, flags);
port->throttled = port->throttle_req;
@@ -484,6 +503,12 @@ void usb_serial_generic_unthrottle(struc
port->throttled = port->throttle_req = 0;
spin_unlock_irq(&port->lock);
+ /*
+ * Matches the smp_mb__after_atomic() in
+ * usb_serial_generic_read_bulk_callback().
+ */
+ smp_mb();
+
if (was_throttled)
usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
}
[ Upstream commit 02b92adbe33e6dbd15dc6e32540b22f47c4ff0a2 ]
Our sun4i_drv_unbind gets the drm device using dev_get_drvdata.
However, that driver data is never set in sun4i_drv_bind.
Set it there to avoid getting a NULL pointer at unbind time.
Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_drv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 8b0cd08034e0c..7cac01c72c027 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -92,6 +92,8 @@ static int sun4i_drv_bind(struct device *dev)
ret = -ENOMEM;
goto free_drm;
}
+
+ dev_set_drvdata(dev, drm);
drm->dev_private = drv;
INIT_LIST_HEAD(&drv->frontend_list);
INIT_LIST_HEAD(&drv->engine_list);
--
2.20.1
[ Upstream commit 27b141fc234a3670d21bd742c35d7205d03cbb3a ]
clang points out that the return code from this function is
undefined for one of the error paths:
../drivers/s390/net/ctcm_main.c:1595:7: warning: variable 'result' is used uninitialized whenever 'if' condition is true
[-Wsometimes-uninitialized]
if (priv->channel[direction] == NULL) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1638:9: note: uninitialized use occurs here
return result;
^~~~~~
../drivers/s390/net/ctcm_main.c:1595:3: note: remove the 'if' if its condition is always false
if (priv->channel[direction] == NULL) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1539:12: note: initialize the variable 'result' to silence this warning
int result;
^
Make it return -ENODEV here, as in the related failure cases.
gcc has a known bug in underreporting some of these warnings
when it has already eliminated the assignment of the return code
based on some earlier optimization step.
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/ctcm_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 7617d21cb2960..f63c5c871d3dd 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -1595,6 +1595,7 @@ static int ctcm_new_device(struct ccwgroup_device *cgdev)
if (priv->channel[direction] == NULL) {
if (direction == CTCM_WRITE)
channel_free(priv->channel[CTCM_READ]);
+ result = -ENODEV;
goto out_dev;
}
priv->channel[direction]->netdev = dev;
--
2.20.1
[ Upstream commit 5a03bc73abed6ae196c15e9950afde19d48be12c ]
Commit f66de3ee2c16 ("net/tls: Split conf to rx + tx") made
freeing of IV and record sequence number conditional to SW
path only, but commit e8f69799810c ("net/tls: Add generic NIC
offload infrastructure") also allocates that state for the
device offload configuration. Remember to free it.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Dirk van der Merwe <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tls/tls_device.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c
index f4a19eac975db..fdf22cb0b3e6b 100644
--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -52,8 +52,11 @@ static DEFINE_SPINLOCK(tls_device_lock);
static void tls_device_free_ctx(struct tls_context *ctx)
{
- if (ctx->tx_conf == TLS_HW)
+ if (ctx->tx_conf == TLS_HW) {
kfree(tls_offload_ctx_tx(ctx));
+ kfree(ctx->tx.rec_seq);
+ kfree(ctx->tx.iv);
+ }
if (ctx->rx_conf == TLS_HW)
kfree(tls_offload_ctx_rx(ctx));
--
2.20.1
[ Upstream commit 144ec97493af34efdb77c5aba146e9c7de8d0a06 ]
Instead of relying on the now removed NULL argument to
pci_alloc_consistent, switch to the generic DMA API, and store the struct
device so that we can pass it.
Fixes: 4167b2ad5182 ("PCI: Remove NULL device handling from PCI DMA API")
Reported-by: Matthew Whitehead <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Tested-by: Matthew Whitehead <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/aic7xxx/aic7770_osm.c | 1 +
drivers/scsi/aic7xxx/aic7xxx.h | 1 +
drivers/scsi/aic7xxx/aic7xxx_osm.c | 10 ++++------
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c | 1 +
4 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c
index 3d401d02c0195..bdd177e3d7622 100644
--- a/drivers/scsi/aic7xxx/aic7770_osm.c
+++ b/drivers/scsi/aic7xxx/aic7770_osm.c
@@ -91,6 +91,7 @@ aic7770_probe(struct device *dev)
ahc = ahc_alloc(&aic7xxx_driver_template, name);
if (ahc == NULL)
return (ENOMEM);
+ ahc->dev = dev;
error = aic7770_config(ahc, aic7770_ident_table + edev->id.driver_data,
eisaBase);
if (error != 0) {
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 4ce4e903a759e..7f6e83296dfa4 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -949,6 +949,7 @@ struct ahc_softc {
* Platform specific device information.
*/
ahc_dev_softc_t dev_softc;
+ struct device *dev;
/*
* Bus specific device information.
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index c6be3aeb302b5..306d0bf33478c 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -861,8 +861,8 @@ int
ahc_dmamem_alloc(struct ahc_softc *ahc, bus_dma_tag_t dmat, void** vaddr,
int flags, bus_dmamap_t *mapp)
{
- *vaddr = pci_alloc_consistent(ahc->dev_softc,
- dmat->maxsize, mapp);
+ /* XXX: check if we really need the GFP_ATOMIC and unwind this mess! */
+ *vaddr = dma_alloc_coherent(ahc->dev, dmat->maxsize, mapp, GFP_ATOMIC);
if (*vaddr == NULL)
return ENOMEM;
return 0;
@@ -872,8 +872,7 @@ void
ahc_dmamem_free(struct ahc_softc *ahc, bus_dma_tag_t dmat,
void* vaddr, bus_dmamap_t map)
{
- pci_free_consistent(ahc->dev_softc, dmat->maxsize,
- vaddr, map);
+ dma_free_coherent(ahc->dev, dmat->maxsize, vaddr, map);
}
int
@@ -1124,8 +1123,7 @@ ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *templa
host->transportt = ahc_linux_transport_template;
- retval = scsi_add_host(host,
- (ahc->dev_softc ? &ahc->dev_softc->dev : NULL));
+ retval = scsi_add_host(host, ahc->dev);
if (retval) {
printk(KERN_WARNING "aic7xxx: scsi_add_host failed\n");
scsi_host_put(host);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
index 0fc14dac7070c..717d8d1082ce1 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -250,6 +250,7 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
ahc->dev_softc = pci;
+ ahc->dev = &pci->dev;
error = ahc_pci_config(ahc, entry);
if (error != 0) {
ahc_free(ahc);
--
2.20.1
[ Upstream commit d7ee81ad09f072eab1681877fc71ec05f9c1ae92 ]
This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory
corruption when handling SHDLC I-Frame commands").
I'm not totally sure, but I think that commit description may have
overstated the danger. I was under the impression that this data came
from the firmware? If you can't trust your networking firmware, then
you're already in trouble.
Anyway, these days we add bounds checking where ever we can and we call
it kernel hardening. Better safe than sorry.
Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/nfc/nci/hci.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/nfc/nci/hci.c b/net/nfc/nci/hci.c
index ddfc52ac1f9b4..c0d323b58e732 100644
--- a/net/nfc/nci/hci.c
+++ b/net/nfc/nci/hci.c
@@ -312,6 +312,10 @@ static void nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe,
create_info = (struct nci_hci_create_pipe_resp *)skb->data;
dest_gate = create_info->dest_gate;
new_pipe = create_info->pipe;
+ if (new_pipe >= NCI_HCI_MAX_PIPES) {
+ status = NCI_HCI_ANY_E_NOK;
+ goto exit;
+ }
/* Save the new created pipe and bind with local gate,
* the description for skb->data[3] is destination gate id
@@ -336,6 +340,10 @@ static void nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe,
goto exit;
}
delete_info = (struct nci_hci_delete_pipe_noti *)skb->data;
+ if (delete_info->pipe >= NCI_HCI_MAX_PIPES) {
+ status = NCI_HCI_ANY_E_NOK;
+ goto exit;
+ }
ndev->hci_dev->pipes[delete_info->pipe].gate =
NCI_HCI_INVALID_GATE;
--
2.20.1
[ Upstream commit d04830531d0c4a99c897a44038e5da3d23331d2f ]
Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.
Before this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias: spi:st95hf
After this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias: spi:st95hf
alias: of:N*T*Cst,st95hfC*
alias: of:N*T*Cst,st95hf
Reported-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Daniel Gomez <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nfc/st95hf/core.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c
index 2b26f762fbc3b..01acb6e533655 100644
--- a/drivers/nfc/st95hf/core.c
+++ b/drivers/nfc/st95hf/core.c
@@ -1074,6 +1074,12 @@ static const struct spi_device_id st95hf_id[] = {
};
MODULE_DEVICE_TABLE(spi, st95hf_id);
+static const struct of_device_id st95hf_spi_of_match[] = {
+ { .compatible = "st,st95hf" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, st95hf_spi_of_match);
+
static int st95hf_probe(struct spi_device *nfc_spi_dev)
{
int ret;
@@ -1260,6 +1266,7 @@ static struct spi_driver st95hf_driver = {
.driver = {
.name = "st95hf",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(st95hf_spi_of_match),
},
.id_table = st95hf_id,
.probe = st95hf_probe,
--
2.20.1
From: Petr Štetiar <[email protected]>
commit 6b583201fa219b7b1b6aebd8966c8fd9357ef9f4 upstream.
It was reported on OpenWrt bug tracking system[1], that several users
are affected by the endless reboot of their routers if they configure
5GHz interface with channel 44 or 48.
The reboot loop is caused by the following excessive number of WARN_ON
messages:
WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516
ieee80211_rx_napi+0x1fc/0xa54 [mac80211]
as the messages are being correctly emitted by the following guard:
case RX_ENC_LEGACY:
if (WARN_ON(status->rate_idx >= sband->n_bitrates))
as the rate_idx is in this case erroneously set to 251 (0xfb). This fix
simply converts previously used magic number to proper constant and
guards against substraction which is leading to the currently observed
underflow.
1. https://bugs.openwrt.org/index.php?do=details&task_id=2218
Fixes: 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive")
Cc: <[email protected]>
Tested-by: Eubert Bao <[email protected]>
Reported-by: Eubert Bao <[email protected]>
Signed-off-by: Petr Štetiar <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwl8k.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -441,6 +441,9 @@ static const struct ieee80211_rate mwl8k
#define MWL8K_CMD_UPDATE_STADB 0x1123
#define MWL8K_CMD_BASTREAM 0x1125
+#define MWL8K_LEGACY_5G_RATE_OFFSET \
+ (ARRAY_SIZE(mwl8k_rates_24) - ARRAY_SIZE(mwl8k_rates_50))
+
static const char *mwl8k_cmd_name(__le16 cmd, char *buf, int bufsize)
{
u16 command = le16_to_cpu(cmd);
@@ -1016,8 +1019,9 @@ mwl8k_rxd_ap_process(void *_rxd, struct
if (rxd->channel > 14) {
status->band = NL80211_BAND_5GHZ;
- if (!(status->encoding == RX_ENC_HT))
- status->rate_idx -= 5;
+ if (!(status->encoding == RX_ENC_HT) &&
+ status->rate_idx >= MWL8K_LEGACY_5G_RATE_OFFSET)
+ status->rate_idx -= MWL8K_LEGACY_5G_RATE_OFFSET;
} else {
status->band = NL80211_BAND_2GHZ;
}
@@ -1124,8 +1128,9 @@ mwl8k_rxd_sta_process(void *_rxd, struct
if (rxd->channel > 14) {
status->band = NL80211_BAND_5GHZ;
- if (!(status->encoding == RX_ENC_HT))
- status->rate_idx -= 5;
+ if (!(status->encoding == RX_ENC_HT) &&
+ status->rate_idx >= MWL8K_LEGACY_5G_RATE_OFFSET)
+ status->rate_idx -= MWL8K_LEGACY_5G_RATE_OFFSET;
} else {
status->band = NL80211_BAND_2GHZ;
}
[ Upstream commit 6491d698396fd5da4941980a35ca7c162a672016 ]
This is similar to commit e285d5bfb7e9 ("NFC: Fix the number of pipes")
where we changed NFC_HCI_MAX_PIPES from 127 to 128.
As the comment next to the define explains, the pipe identifier is 7
bits long. The highest possible pipe is 127, but the number of possible
pipes is 128. As the code is now, then there is potential for an
out of bounds array access:
net/nfc/nci/hci.c:297 nci_hci_cmd_received() warn: array off by one?
'ndev->hci_dev->pipes[pipe]' '0-127 == 127'
Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/nfc/nci_core.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index 87499b6b35d6d..df5c69db68afc 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -166,7 +166,7 @@ struct nci_conn_info {
* According to specification 102 622 chapter 4.4 Pipes,
* the pipe identifier is 7 bits long.
*/
-#define NCI_HCI_MAX_PIPES 127
+#define NCI_HCI_MAX_PIPES 128
struct nci_hci_gate {
u8 gate;
--
2.20.1
[ Upstream commit bce1a78423961fce676ac65540a31b6ffd179e6d ]
The RMI4 function structure has been released in rmi_register_function
if error occurs. However, it will be released again in the function
rmi_create_function, which may result in a double-free bug.
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/rmi4/rmi_driver.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index fc3ab93b7aea4..7fb358f961957 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -860,7 +860,7 @@ static int rmi_create_function(struct rmi_device *rmi_dev,
error = rmi_register_function(fn);
if (error)
- goto err_put_fn;
+ return error;
if (pdt->function_number == 0x01)
data->f01_container = fn;
@@ -870,10 +870,6 @@ static int rmi_create_function(struct rmi_device *rmi_dev,
list_add_tail(&fn->node, &data->function_list);
return RMI_SCAN_CONTINUE;
-
-err_put_fn:
- put_device(&fn->dev);
- return error;
}
void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
--
2.20.1
[ Upstream commit 0261ea1bd1eb0da5c0792a9119b8655cf33c80a3 ]
We can receive ICMP errors from client or from
tunneling real server. While the former can be
scheduled to real server, the latter should
not be scheduled, they are decapsulated only when
existing connection is found.
Fixes: 6044eeffafbe ("ipvs: attempt to schedule icmp packets")
Signed-off-by: Julian Anastasov <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipvs/ip_vs_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 3f963ea222774..a42c1bc7c6982 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1647,7 +1647,7 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related,
if (!cp) {
int v;
- if (!sysctl_schedule_icmp(ipvs))
+ if (ipip || !sysctl_schedule_icmp(ipvs))
return NF_ACCEPT;
if (!ip_vs_try_to_schedule(ipvs, AF_INET, skb, pd, &v, &cp, &ciph))
--
2.20.1
[ Upstream commit 88b9a3d1425a436e95c41f09986fdae2daee437a ]
The xmon debugger IPI handler waits in the callback function while
xmon is still active. This means they don't complete the IPI, and the
initiator always times out waiting for them.
Things manage to work after the timeout because there is some fallback
logic to keep NMI IPI state sane in case of the timeout, but this is a
bit ugly.
This patch changes NMI IPI back to half-asynchronous (i.e., wait for
everyone to call in, do not wait for IPI function to complete), but
the complexity is avoided by going one step further and allowing new
IPIs to be issued before the IPI functions to all complete.
If synchronization against that is required, it is left up to the
caller, but current callers don't require that. In fact with the
timeout handling, callers must be able to cope with this already.
Fixes: 5b73151fff63 ("powerpc: NMI IPI make NMI IPIs fully sychronous")
Cc: [email protected] # v4.19+
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/smp.c | 93 ++++++++++++---------------------------
1 file changed, 29 insertions(+), 64 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 22abba5f4cf0e..6dc43205382ba 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -338,13 +338,12 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
* NMI IPIs may not be recoverable, so should not be used as ongoing part of
* a running system. They can be used for crash, debug, halt/reboot, etc.
*
- * NMI IPIs are globally single threaded. No more than one in progress at
- * any time.
- *
* The IPI call waits with interrupts disabled until all targets enter the
- * NMI handler, then the call returns.
+ * NMI handler, then returns. Subsequent IPIs can be issued before targets
+ * have returned from their handlers, so there is no guarantee about
+ * concurrency or re-entrancy.
*
- * No new NMI can be initiated until targets exit the handler.
+ * A new NMI can be issued before all targets exit the handler.
*
* The IPI call may time out without all targets entering the NMI handler.
* In that case, there is some logic to recover (and ignore subsequent
@@ -355,7 +354,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
static atomic_t __nmi_ipi_lock = ATOMIC_INIT(0);
static struct cpumask nmi_ipi_pending_mask;
-static int nmi_ipi_busy_count = 0;
+static bool nmi_ipi_busy = false;
static void (*nmi_ipi_function)(struct pt_regs *) = NULL;
static void nmi_ipi_lock_start(unsigned long *flags)
@@ -394,7 +393,7 @@ static void nmi_ipi_unlock_end(unsigned long *flags)
*/
int smp_handle_nmi_ipi(struct pt_regs *regs)
{
- void (*fn)(struct pt_regs *);
+ void (*fn)(struct pt_regs *) = NULL;
unsigned long flags;
int me = raw_smp_processor_id();
int ret = 0;
@@ -405,29 +404,17 @@ int smp_handle_nmi_ipi(struct pt_regs *regs)
* because the caller may have timed out.
*/
nmi_ipi_lock_start(&flags);
- if (!nmi_ipi_busy_count)
- goto out;
- if (!cpumask_test_cpu(me, &nmi_ipi_pending_mask))
- goto out;
-
- fn = nmi_ipi_function;
- if (!fn)
- goto out;
-
- cpumask_clear_cpu(me, &nmi_ipi_pending_mask);
- nmi_ipi_busy_count++;
- nmi_ipi_unlock();
-
- ret = 1;
-
- fn(regs);
-
- nmi_ipi_lock();
- if (nmi_ipi_busy_count > 1) /* Can race with caller time-out */
- nmi_ipi_busy_count--;
-out:
+ if (cpumask_test_cpu(me, &nmi_ipi_pending_mask)) {
+ cpumask_clear_cpu(me, &nmi_ipi_pending_mask);
+ fn = READ_ONCE(nmi_ipi_function);
+ WARN_ON_ONCE(!fn);
+ ret = 1;
+ }
nmi_ipi_unlock_end(&flags);
+ if (fn)
+ fn(regs);
+
return ret;
}
@@ -453,7 +440,7 @@ static void do_smp_send_nmi_ipi(int cpu, bool safe)
* - cpu is the target CPU (must not be this CPU), or NMI_IPI_ALL_OTHERS.
* - fn is the target callback function.
* - delay_us > 0 is the delay before giving up waiting for targets to
- * complete executing the handler, == 0 specifies indefinite delay.
+ * begin executing the handler, == 0 specifies indefinite delay.
*/
int __smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us, bool safe)
{
@@ -467,31 +454,33 @@ int __smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us, bool
if (unlikely(!smp_ops))
return 0;
- /* Take the nmi_ipi_busy count/lock with interrupts hard disabled */
nmi_ipi_lock_start(&flags);
- while (nmi_ipi_busy_count) {
+ while (nmi_ipi_busy) {
nmi_ipi_unlock_end(&flags);
- spin_until_cond(nmi_ipi_busy_count == 0);
+ spin_until_cond(!nmi_ipi_busy);
nmi_ipi_lock_start(&flags);
}
-
+ nmi_ipi_busy = true;
nmi_ipi_function = fn;
+ WARN_ON_ONCE(!cpumask_empty(&nmi_ipi_pending_mask));
+
if (cpu < 0) {
/* ALL_OTHERS */
cpumask_copy(&nmi_ipi_pending_mask, cpu_online_mask);
cpumask_clear_cpu(me, &nmi_ipi_pending_mask);
} else {
- /* cpumask starts clear */
cpumask_set_cpu(cpu, &nmi_ipi_pending_mask);
}
- nmi_ipi_busy_count++;
+
nmi_ipi_unlock();
+ /* Interrupts remain hard disabled */
+
do_smp_send_nmi_ipi(cpu, safe);
nmi_ipi_lock();
- /* nmi_ipi_busy_count is held here, so unlock/lock is okay */
+ /* nmi_ipi_busy is set here, so unlock/lock is okay */
while (!cpumask_empty(&nmi_ipi_pending_mask)) {
nmi_ipi_unlock();
udelay(1);
@@ -499,34 +488,19 @@ int __smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us, bool
if (delay_us) {
delay_us--;
if (!delay_us)
- goto timeout;
+ break;
}
}
- while (nmi_ipi_busy_count > 1) {
- nmi_ipi_unlock();
- udelay(1);
- nmi_ipi_lock();
- if (delay_us) {
- delay_us--;
- if (!delay_us)
- goto timeout;
- }
- }
-
-timeout:
if (!cpumask_empty(&nmi_ipi_pending_mask)) {
/* Timeout waiting for CPUs to call smp_handle_nmi_ipi */
ret = 0;
cpumask_clear(&nmi_ipi_pending_mask);
}
- if (nmi_ipi_busy_count > 1) {
- /* Timeout waiting for CPUs to execute fn */
- ret = 0;
- nmi_ipi_busy_count = 1;
- }
- nmi_ipi_busy_count--;
+ nmi_ipi_function = NULL;
+ nmi_ipi_busy = false;
+
nmi_ipi_unlock_end(&flags);
return ret;
@@ -594,17 +568,8 @@ void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
static void nmi_stop_this_cpu(struct pt_regs *regs)
{
/*
- * This is a special case because it never returns, so the NMI IPI
- * handling would never mark it as done, which makes any later
- * smp_send_nmi_ipi() call spin forever. Mark it done now.
- *
* IRQs are already hard disabled by the smp_handle_nmi_ipi.
*/
- nmi_ipi_lock();
- if (nmi_ipi_busy_count > 1)
- nmi_ipi_busy_count--;
- nmi_ipi_unlock();
-
spin_begin();
while (1)
spin_cpu_relax();
--
2.20.1
[ Upstream commit 1b5fc84aba170bdfe3533396ca9662ceea1609b7 ]
The NMI IPI timeout logic is broken, if __smp_send_nmi_ipi() times out
on the first condition, delay_us will be zero which will send it into
the second spin loop with no timeout so it will spin forever.
Fixes: 5b73151fff63 ("powerpc: NMI IPI make NMI IPIs fully sychronous")
Cc: [email protected] # v4.19+
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/smp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 61c1fadbc6444..22abba5f4cf0e 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -499,7 +499,7 @@ int __smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us, bool
if (delay_us) {
delay_us--;
if (!delay_us)
- break;
+ goto timeout;
}
}
@@ -510,10 +510,11 @@ int __smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us, bool
if (delay_us) {
delay_us--;
if (!delay_us)
- break;
+ goto timeout;
}
}
+timeout:
if (!cpumask_empty(&nmi_ipi_pending_mask)) {
/* Timeout waiting for CPUs to call smp_handle_nmi_ipi */
ret = 0;
--
2.20.1
From: Breno Leitao <[email protected]>
commit 42e2acde1237878462b028f5a27d9cc5bea7502c upstream.
Current powerpc security.c file is defining functions, as
cpu_show_meltdown(), cpu_show_spectre_v{1,2} and others, that are being
declared at linux/cpu.h header without including the header file that
contains these declarations.
This is being reported by sparse, which thinks that these functions are
static, due to the lack of declaration:
arch/powerpc/kernel/security.c:105:9: warning: symbol 'cpu_show_meltdown' was not declared. Should it be static?
arch/powerpc/kernel/security.c:139:9: warning: symbol 'cpu_show_spectre_v1' was not declared. Should it be static?
arch/powerpc/kernel/security.c:161:9: warning: symbol 'cpu_show_spectre_v2' was not declared. Should it be static?
arch/powerpc/kernel/security.c:209:6: warning: symbol 'stf_barrier' was not declared. Should it be static?
arch/powerpc/kernel/security.c:289:9: warning: symbol 'cpu_show_spec_store_bypass' was not declared. Should it be static?
This patch simply includes the proper header (linux/cpu.h) to match
function definition and declaration.
Signed-off-by: Breno Leitao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Cc: Joel Stanley <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Major Hayden <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/security.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -4,6 +4,7 @@
//
// Copyright 2018, Michael Ellerman, IBM Corporation.
+#include <linux/cpu.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/seq_buf.h>
[ Upstream commit e82adc1074a7356f1158233551df9e86b7ebfb82 ]
Currently there is no check on platform_get_irq() return value
in case it fails, hence never actually reporting any errors and
causing unexpected behavior when using such value as argument
for function regmap_irq_get_virq().
Fix this by adding a proper check, a message error and return
*irq* in case platform_get_irq() fails.
Addresses-Coverity-ID: 1443899 ("Improper use of negative value")
Fixes: d2061f9cc32d ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY")
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/typec/typec_wcove.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c
index 423208e19383c..6770afd407654 100644
--- a/drivers/usb/typec/typec_wcove.c
+++ b/drivers/usb/typec/typec_wcove.c
@@ -615,8 +615,13 @@ static int wcove_typec_probe(struct platform_device *pdev)
wcove->dev = &pdev->dev;
wcove->regmap = pmic->regmap;
- irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr,
- platform_get_irq(pdev, 0));
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+ return irq;
+ }
+
+ irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr, irq);
if (irq < 0)
return irq;
--
2.20.1
From: Paul Bolle <[email protected]>
[ Upstream commit 4014dfae3ccaaf3ec19c9ae0691a3f14e7132eae ]
The switch to make bas_gigaset use usb_fill_int_urb() - instead of
filling that urb "by hand" - missed the subtle ordering of the previous
code.
See, before the switch urb->dev was set to a member somewhere deep in a
complicated structure and then supplied to usb_rcvisocpipe() and
usb_sndisocpipe(). After that switch urb->dev wasn't set to anything
specific before being supplied to those two macros. This triggers a
nasty oops:
BUG: unable to handle kernel NULL pointer dereference at 00000000
#PF error: [normal kernel read fault]
*pde = 00000000
Oops: 0000 [#1] SMP
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc4.1.local0.fc28.i686 #1
Hardware name: IBM 2525FAG/2525FAG, BIOS 74ET64WW (2.09 ) 12/14/2006
EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: f30c9f20
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
Call Trace:
<SOFTIRQ>
? gigaset_isdn_connD+0xf6/0x140 [gigaset]
gigaset_handle_event+0x173e/0x1b90 [gigaset]
tasklet_action_common.isra.16+0x4e/0xf0
tasklet_action+0x1e/0x20
__do_softirq+0xb2/0x293
? __irqentry_text_end+0x3/0x3
call_on_stack+0x45/0x50
</SOFTIRQ>
? irq_exit+0xb5/0xc0
? do_IRQ+0x78/0xd0
? acpi_idle_enter_s2idle+0x50/0x50
? common_interrupt+0xd4/0xdc
? acpi_idle_enter_s2idle+0x50/0x50
? sched_cpu_activate+0x1b/0xf0
? acpi_fan_resume.cold.7+0x9/0x18
? cpuidle_enter_state+0x152/0x4c0
? cpuidle_enter+0x14/0x20
? call_cpuidle+0x21/0x40
? do_idle+0x1c8/0x200
? cpu_startup_entry+0x25/0x30
? rest_init+0x88/0x8a
? arch_call_rest_init+0xd/0x19
? start_kernel+0x42f/0x448
? i386_start_kernel+0xac/0xb0
? startup_32_smp+0x164/0x168
Modules linked in: ppp_generic slhc capi bas_gigaset gigaset kernelcapi nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables sunrpc ipw2200 iTCO_wdt gpio_ich snd_intel8x0 libipw iTCO_vendor_support snd_ac97_codec lib80211 ppdev ac97_bus snd_seq cfg80211 snd_seq_device pcspkr thinkpad_acpi lpc_ich snd_pcm i2c_i801 snd_timer ledtrig_audio snd soundcore rfkill parport_pc parport pcc_cpufreq acpi_cpufreq i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sdhci_pci sysimgblt cqhci fb_sys_fops drm sdhci mmc_core tg3 ata_generic serio_raw yenta_socket pata_acpi video
CR2: 0000000000000000
---[ end trace 1fe07487b9200c73 ]---
EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: cddcb3bc
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0xcc00000 from 0xc0400000 (relocation range: 0xc0000000-0xf6ffdfff)
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
No-one noticed because this Oops is apparently only triggered by setting
up an ISDN data connection on a live ISDN line on a gigaset base (ie,
the PBX that the gigaset driver support). Very few people do that
running present day kernels.
Anyhow, a little code reorganization makes this problem go away, while
avoiding the subtle ordering that was used in the past. So let's do
that.
Fixes: 78c696c19578 ("isdn: gigaset: use usb_fill_int_urb()")
Signed-off-by: Paul Bolle <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/isdn/gigaset/bas-gigaset.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -958,6 +958,7 @@ static void write_iso_callback(struct ur
*/
static int starturbs(struct bc_state *bcs)
{
+ struct usb_device *udev = bcs->cs->hw.bas->udev;
struct bas_bc_state *ubc = bcs->hw.bas;
struct urb *urb;
int j, k;
@@ -975,8 +976,8 @@ static int starturbs(struct bc_state *bc
rc = -EFAULT;
goto error;
}
- usb_fill_int_urb(urb, bcs->cs->hw.bas->udev,
- usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel),
+ usb_fill_int_urb(urb, udev,
+ usb_rcvisocpipe(udev, 3 + 2 * bcs->channel),
ubc->isoinbuf + k * BAS_INBUFSIZE,
BAS_INBUFSIZE, read_iso_callback, bcs,
BAS_FRAMETIME);
@@ -1006,8 +1007,8 @@ static int starturbs(struct bc_state *bc
rc = -EFAULT;
goto error;
}
- usb_fill_int_urb(urb, bcs->cs->hw.bas->udev,
- usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel),
+ usb_fill_int_urb(urb, udev,
+ usb_sndisocpipe(udev, 4 + 2 * bcs->channel),
ubc->isooutbuf->data,
sizeof(ubc->isooutbuf->data),
write_iso_callback, &ubc->isoouturbs[k],
[ Upstream commit d7c3a206e6338e4ccdf030719dec028e26a521d5 ]
Some SOC like i.MX6SX clock have some limits:
- ahb clock should be disabled before ipg.
- ahb and ipg clocks are required for MAC MII bus.
So, move the ahb clock to runtime management together with
ipg clock.
Signed-off-by: Fugang Duan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/fec_main.c | 30 ++++++++++++++++-------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 7b98bb75ba8ac..ad41ace0a27a5 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1850,13 +1850,9 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
int ret;
if (enable) {
- ret = clk_prepare_enable(fep->clk_ahb);
- if (ret)
- return ret;
-
ret = clk_prepare_enable(fep->clk_enet_out);
if (ret)
- goto failed_clk_enet_out;
+ return ret;
if (fep->clk_ptp) {
mutex_lock(&fep->ptp_clk_mutex);
@@ -1876,7 +1872,6 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
phy_reset_after_clk_enable(ndev->phydev);
} else {
- clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_enet_out);
if (fep->clk_ptp) {
mutex_lock(&fep->ptp_clk_mutex);
@@ -1895,8 +1890,6 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
failed_clk_ptp:
if (fep->clk_enet_out)
clk_disable_unprepare(fep->clk_enet_out);
-failed_clk_enet_out:
- clk_disable_unprepare(fep->clk_ahb);
return ret;
}
@@ -3485,6 +3478,9 @@ fec_probe(struct platform_device *pdev)
ret = clk_prepare_enable(fep->clk_ipg);
if (ret)
goto failed_clk_ipg;
+ ret = clk_prepare_enable(fep->clk_ahb);
+ if (ret)
+ goto failed_clk_ahb;
fep->reg_phy = devm_regulator_get(&pdev->dev, "phy");
if (!IS_ERR(fep->reg_phy)) {
@@ -3578,6 +3574,9 @@ fec_probe(struct platform_device *pdev)
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
failed_regulator:
+ clk_disable_unprepare(fep->clk_ahb);
+failed_clk_ahb:
+ clk_disable_unprepare(fep->clk_ipg);
failed_clk_ipg:
fec_enet_clk_enable(ndev, false);
failed_clk:
@@ -3701,6 +3700,7 @@ static int __maybe_unused fec_runtime_suspend(struct device *dev)
struct net_device *ndev = dev_get_drvdata(dev);
struct fec_enet_private *fep = netdev_priv(ndev);
+ clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
return 0;
@@ -3710,8 +3710,20 @@ static int __maybe_unused fec_runtime_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct fec_enet_private *fep = netdev_priv(ndev);
+ int ret;
- return clk_prepare_enable(fep->clk_ipg);
+ ret = clk_prepare_enable(fep->clk_ahb);
+ if (ret)
+ return ret;
+ ret = clk_prepare_enable(fep->clk_ipg);
+ if (ret)
+ goto failed_clk_ipg;
+
+ return 0;
+
+failed_clk_ipg:
+ clk_disable_unprepare(fep->clk_ahb);
+ return ret;
}
static const struct dev_pm_ops fec_pm_ops = {
--
2.20.1
From: Dan Carpenter <[email protected]>
commit c8ea3663f7a8e6996d44500ee818c9330ac4fd88 upstream.
strndup_user() returns error pointers on error, and then in the error
handling we pass the error pointers to kfree(). It will cause an Oops.
Link: http://lkml.kernel.org/r/20181218082003.GD32567@kadam
Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Mihai Caraman <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/virt/fsl_hypervisor.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -331,8 +331,8 @@ static long ioctl_dtprop(struct fsl_hv_i
struct fsl_hv_ioctl_prop param;
char __user *upath, *upropname;
void __user *upropval;
- char *path = NULL, *propname = NULL;
- void *propval = NULL;
+ char *path, *propname;
+ void *propval;
int ret = 0;
/* Get the parameters from the user. */
@@ -344,32 +344,30 @@ static long ioctl_dtprop(struct fsl_hv_i
upropval = (void __user *)(uintptr_t)param.propval;
path = strndup_user(upath, FH_DTPROP_MAX_PATHLEN);
- if (IS_ERR(path)) {
- ret = PTR_ERR(path);
- goto out;
- }
+ if (IS_ERR(path))
+ return PTR_ERR(path);
propname = strndup_user(upropname, FH_DTPROP_MAX_PATHLEN);
if (IS_ERR(propname)) {
ret = PTR_ERR(propname);
- goto out;
+ goto err_free_path;
}
if (param.proplen > FH_DTPROP_MAX_PROPLEN) {
ret = -EINVAL;
- goto out;
+ goto err_free_propname;
}
propval = kmalloc(param.proplen, GFP_KERNEL);
if (!propval) {
ret = -ENOMEM;
- goto out;
+ goto err_free_propname;
}
if (set) {
if (copy_from_user(propval, upropval, param.proplen)) {
ret = -EFAULT;
- goto out;
+ goto err_free_propval;
}
param.ret = fh_partition_set_dtprop(param.handle,
@@ -388,7 +386,7 @@ static long ioctl_dtprop(struct fsl_hv_i
if (copy_to_user(upropval, propval, param.proplen) ||
put_user(param.proplen, &p->proplen)) {
ret = -EFAULT;
- goto out;
+ goto err_free_propval;
}
}
}
@@ -396,10 +394,12 @@ static long ioctl_dtprop(struct fsl_hv_i
if (put_user(param.ret, &p->ret))
ret = -EFAULT;
-out:
- kfree(path);
+err_free_propval:
kfree(propval);
+err_free_propname:
kfree(propname);
+err_free_path:
+ kfree(path);
return ret;
}
From: Laurentiu Tudor <[email protected]>
commit 5266e58d6cd90ac85c187d673093ad9cb649e16d upstream.
Set RI in the default kernel's MSR so that the architected way of
detecting unrecoverable machine check interrupts has a chance to work.
This is inline with the MSR setup of the rest of booke powerpc
architectures configured here.
Signed-off-by: Laurentiu Tudor <[email protected]>
Cc: [email protected]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/reg_booke.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -41,7 +41,7 @@
#if defined(CONFIG_PPC_BOOK3E_64)
#define MSR_64BIT MSR_CM
-#define MSR_ (MSR_ME | MSR_CE)
+#define MSR_ (MSR_ME | MSR_RI | MSR_CE)
#define MSR_KERNEL (MSR_ | MSR_64BIT)
#define MSR_USER32 (MSR_ | MSR_PR | MSR_EE)
#define MSR_USER64 (MSR_USER32 | MSR_64BIT)
[ Upstream commit 6041186a32585fc7a1d0f6cfe2f138b05fdc3c82 ]
When a module option, or core kernel argument, toggles a static-key it
requires jump labels to be initialized early. While x86, PowerPC, and
ARM64 arrange for jump_label_init() to be called before parse_args(),
ARM does not.
Kernel command line: rdinit=/sbin/init page_alloc.shuffle=1 panic=-1 console=ttyAMA0,115200 page_alloc.shuffle=1
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at ./include/linux/jump_label.h:303
page_alloc_shuffle+0x12c/0x1ac
static_key_enable(): static key 'page_alloc_shuffle_key+0x0/0x4' used
before call to jump_label_init()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted
5.1.0-rc4-next-20190410-00003-g3367c36ce744 #1
Hardware name: ARM Integrator/CP (Device Tree)
[<c0011c68>] (unwind_backtrace) from [<c000ec48>] (show_stack+0x10/0x18)
[<c000ec48>] (show_stack) from [<c07e9710>] (dump_stack+0x18/0x24)
[<c07e9710>] (dump_stack) from [<c001bb1c>] (__warn+0xe0/0x108)
[<c001bb1c>] (__warn) from [<c001bb88>] (warn_slowpath_fmt+0x44/0x6c)
[<c001bb88>] (warn_slowpath_fmt) from [<c0b0c4a8>]
(page_alloc_shuffle+0x12c/0x1ac)
[<c0b0c4a8>] (page_alloc_shuffle) from [<c0b0c550>] (shuffle_store+0x28/0x48)
[<c0b0c550>] (shuffle_store) from [<c003e6a0>] (parse_args+0x1f4/0x350)
[<c003e6a0>] (parse_args) from [<c0ac3c00>] (start_kernel+0x1c0/0x488)
Move the fallback call to jump_label_init() to occur before
parse_args().
The redundant calls to jump_label_init() in other archs are left intact
in case they have static key toggling use cases that are even earlier
than option parsing.
Link: http://lkml.kernel.org/r/155544804466.1032396.13418949511615676665.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Reported-by: Guenter Roeck <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
init/main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/init/main.c b/init/main.c
index e083fac08aedc..020972fed1171 100644
--- a/init/main.c
+++ b/init/main.c
@@ -568,6 +568,8 @@ asmlinkage __visible void __init start_kernel(void)
page_alloc_init();
pr_notice("Kernel command line: %s\n", boot_command_line);
+ /* parameters may set static keys */
+ jump_label_init();
parse_early_param();
after_dashes = parse_args("Booting kernel",
static_command_line, __start___param,
@@ -577,8 +579,6 @@ asmlinkage __visible void __init start_kernel(void)
parse_args("Setting init args", after_dashes, NULL, 0, -1, -1,
NULL, set_init_arg);
- jump_label_init();
-
/*
* These use large bootmem allocations and must precede
* kmem_cache_init()
--
2.20.1
[ Upstream commit 3b991208b897f52507168374033771a984b947b1 ]
During !CONFIG_CGROUP reclaim, we expand the inactive list size if it's
thrashing on the node that is about to be reclaimed. But when cgroups
are enabled, we suddenly ignore the node scope and use the cgroup scope
only. The result is that pressure bleeds between NUMA nodes depending
on whether cgroups are merely compiled into Linux. This behavioral
difference is unexpected and undesirable.
When the refault adaptivity of the inactive list was first introduced,
there were no statistics at the lruvec level - the intersection of node
and memcg - so it was better than nothing.
But now that we have that infrastructure, use lruvec_page_state() to
make the list balancing decision always NUMA aware.
[[email protected]: fix bisection hole]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 2a2e48854d70 ("mm: vmscan: fix IO/refault regression in cache workingset transition")
Signed-off-by: Johannes Weiner <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/vmscan.c | 29 +++++++++--------------------
1 file changed, 9 insertions(+), 20 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 3830066018c15..ee545d1e9894d 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2190,7 +2190,6 @@ static void shrink_active_list(unsigned long nr_to_scan,
* 10TB 320 32GB
*/
static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
- struct mem_cgroup *memcg,
struct scan_control *sc, bool actual_reclaim)
{
enum lru_list active_lru = file * LRU_FILE + LRU_ACTIVE;
@@ -2211,16 +2210,12 @@ static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
inactive = lruvec_lru_size(lruvec, inactive_lru, sc->reclaim_idx);
active = lruvec_lru_size(lruvec, active_lru, sc->reclaim_idx);
- if (memcg)
- refaults = memcg_page_state(memcg, WORKINGSET_ACTIVATE);
- else
- refaults = node_page_state(pgdat, WORKINGSET_ACTIVATE);
-
/*
* When refaults are being observed, it means a new workingset
* is being established. Disable active list protection to get
* rid of the stale workingset quickly.
*/
+ refaults = lruvec_page_state(lruvec, WORKINGSET_ACTIVATE);
if (file && actual_reclaim && lruvec->refaults != refaults) {
inactive_ratio = 0;
} else {
@@ -2241,12 +2236,10 @@ static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
}
static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
- struct lruvec *lruvec, struct mem_cgroup *memcg,
- struct scan_control *sc)
+ struct lruvec *lruvec, struct scan_control *sc)
{
if (is_active_lru(lru)) {
- if (inactive_list_is_low(lruvec, is_file_lru(lru),
- memcg, sc, true))
+ if (inactive_list_is_low(lruvec, is_file_lru(lru), sc, true))
shrink_active_list(nr_to_scan, lruvec, sc, lru);
return 0;
}
@@ -2346,7 +2339,7 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
* anonymous pages on the LRU in eligible zones.
* Otherwise, the small LRU gets thrashed.
*/
- if (!inactive_list_is_low(lruvec, false, memcg, sc, false) &&
+ if (!inactive_list_is_low(lruvec, false, sc, false) &&
lruvec_lru_size(lruvec, LRU_INACTIVE_ANON, sc->reclaim_idx)
>> sc->priority) {
scan_balance = SCAN_ANON;
@@ -2364,7 +2357,7 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
* lruvec even if it has plenty of old anonymous pages unless the
* system is under heavy pressure.
*/
- if (!inactive_list_is_low(lruvec, true, memcg, sc, false) &&
+ if (!inactive_list_is_low(lruvec, true, sc, false) &&
lruvec_lru_size(lruvec, LRU_INACTIVE_FILE, sc->reclaim_idx) >> sc->priority) {
scan_balance = SCAN_FILE;
goto out;
@@ -2517,7 +2510,7 @@ static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memc
nr[lru] -= nr_to_scan;
nr_reclaimed += shrink_list(lru, nr_to_scan,
- lruvec, memcg, sc);
+ lruvec, sc);
}
}
@@ -2584,7 +2577,7 @@ static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memc
* Even if we did not try to evict anon pages at all, we want to
* rebalance the anon lru active/inactive ratio.
*/
- if (inactive_list_is_low(lruvec, false, memcg, sc, true))
+ if (inactive_list_is_low(lruvec, false, sc, true))
shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
sc, LRU_ACTIVE_ANON);
}
@@ -2982,12 +2975,8 @@ static void snapshot_refaults(struct mem_cgroup *root_memcg, pg_data_t *pgdat)
unsigned long refaults;
struct lruvec *lruvec;
- if (memcg)
- refaults = memcg_page_state(memcg, WORKINGSET_ACTIVATE);
- else
- refaults = node_page_state(pgdat, WORKINGSET_ACTIVATE);
-
lruvec = mem_cgroup_lruvec(pgdat, memcg);
+ refaults = lruvec_page_state(lruvec, WORKINGSET_ACTIVATE);
lruvec->refaults = refaults;
} while ((memcg = mem_cgroup_iter(root_memcg, memcg, NULL)));
}
@@ -3344,7 +3333,7 @@ static void age_active_anon(struct pglist_data *pgdat,
do {
struct lruvec *lruvec = mem_cgroup_lruvec(pgdat, memcg);
- if (inactive_list_is_low(lruvec, false, memcg, sc, true))
+ if (inactive_list_is_low(lruvec, false, sc, true))
shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
sc, LRU_ACTIVE_ANON);
--
2.20.1
From: Laurentiu Tudor <[email protected]>
[ Upstream commit 17170e6570c082717c142733d9a638bcd20551f8 ]
Fix issue with the entry indexing in the sg frame cleanup code being
off-by-1. This problem showed up when doing some basic iperf tests and
manifested in traffic coming to a halt.
Signed-off-by: Laurentiu Tudor <[email protected]>
Acked-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -1648,7 +1648,7 @@ static struct sk_buff *dpaa_cleanup_tx_f
qm_sg_entry_get_len(&sgt[0]), dma_dir);
/* remaining pages were mapped with skb_frag_dma_map() */
- for (i = 1; i < nr_frags; i++) {
+ for (i = 1; i <= nr_frags; i++) {
WARN_ON(qm_sg_entry_is_ext(&sgt[i]));
dma_unmap_page(dev, qm_sg_addr(&sgt[i]),
From: YueHaibing <[email protected]>
[ Upstream commit 68be930249d051fd54d3d99156b3dcadcb2a1f9b ]
BUG: unable to handle kernel paging request at ffffffffa01c5430
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:raw_notifier_chain_register+0x16/0x40
Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08
RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282
RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b
RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068
RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700
R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78
FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0
Call Trace:
register_netdevice_notifier+0x43/0x250
? 0xffffffffa01e0000
dsa_slave_register_notifier+0x13/0x70 [dsa_core
? 0xffffffffa01e0000
dsa_init_module+0x2e/0x1000 [dsa_core
do_one_initcall+0x6c/0x3cc
? do_init_module+0x22/0x1f1
? rcu_read_lock_sched_held+0x97/0xb0
? kmem_cache_alloc_trace+0x325/0x3b0
do_init_module+0x5b/0x1f1
load_module+0x1db1/0x2690
? m_show+0x1d0/0x1d0
__do_sys_finit_module+0xc5/0xd0
__x64_sys_finit_module+0x15/0x20
do_syscall_64+0x6b/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Cleanup allocated resourses if there are errors,
otherwise it will trgger memleak.
Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification")
Signed-off-by: YueHaibing <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/dsa/dsa.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -293,15 +293,22 @@ static int __init dsa_init_module(void)
rc = dsa_slave_register_notifier();
if (rc)
- return rc;
+ goto register_notifier_fail;
rc = dsa_legacy_register();
if (rc)
- return rc;
+ goto legacy_register_fail;
dev_add_pack(&dsa_pack_type);
return 0;
+
+legacy_register_fail:
+ dsa_slave_unregister_notifier();
+register_notifier_fail:
+ destroy_workqueue(dsa_owq);
+
+ return rc;
}
module_init(dsa_init_module);
From: YueHaibing <[email protected]>
[ Upstream commit 36096f2f4fa05f7678bc87397665491700bae757 ]
kernel BUG at lib/list_debug.c:47!
invalid opcode: 0000 [#1
CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__list_del_entry_valid+0x53/0x90
Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48
89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2
RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286
RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff
RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000
FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0
Call Trace:
unregister_pernet_operations+0x34/0x120
unregister_pernet_subsys+0x1c/0x30
packet_exit+0x1c/0x369 [af_packet
__x64_sys_delete_module+0x156/0x260
? lockdep_hardirqs_on+0x133/0x1b0
? do_syscall_64+0x12/0x1f0
do_syscall_64+0x6e/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
When modprobe af_packet, register_pernet_subsys
fails and does a cleanup, ops->list is set to LIST_POISON1,
but the module init is considered to success, then while rmmod it,
BUG() is triggered in __list_del_entry_valid which is called from
unregister_pernet_subsys. This patch fix error handing path in
packet_init to avoid possilbe issue if some error occur.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/packet/af_packet.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -4578,14 +4578,29 @@ static void __exit packet_exit(void)
static int __init packet_init(void)
{
- int rc = proto_register(&packet_proto, 0);
+ int rc;
- if (rc != 0)
+ rc = proto_register(&packet_proto, 0);
+ if (rc)
goto out;
+ rc = sock_register(&packet_family_ops);
+ if (rc)
+ goto out_proto;
+ rc = register_pernet_subsys(&packet_net_ops);
+ if (rc)
+ goto out_sock;
+ rc = register_netdevice_notifier(&packet_netdev_notifier);
+ if (rc)
+ goto out_pernet;
- sock_register(&packet_family_ops);
- register_pernet_subsys(&packet_net_ops);
- register_netdevice_notifier(&packet_netdev_notifier);
+ return 0;
+
+out_pernet:
+ unregister_pernet_subsys(&packet_net_ops);
+out_sock:
+ sock_unregister(PF_PACKET);
+out_proto:
+ proto_unregister(&packet_proto);
out:
return rc;
}
From: Thomas Bogendoerfer <[email protected]>
[ Upstream commit 5afcd14cfc7fed1bcc8abcee2cef82732772bfc2 ]
The old MIPS implementation of dma_cache_sync() didn't use the dev argument,
but commit c9eb6172c328 ("dma-mapping: turn dma_cache_sync into a
dma_map_ops method") changed that, so we now need to set dev.parent.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/seeq/sgiseeq.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/seeq/sgiseeq.c
+++ b/drivers/net/ethernet/seeq/sgiseeq.c
@@ -735,6 +735,7 @@ static int sgiseeq_probe(struct platform
}
platform_set_drvdata(pdev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
sp = netdev_priv(dev);
/* Make private data page aligned */
From: Hangbin Liu <[email protected]>
[ Upstream commit 873017af778439f2f8e3d87f28ddb1fcaf244a76 ]
With NET_ADMIN enabled in container, a normal user could be mapped to
root and is able to change the real device's rx filter via ioctl on
vlan, which would affect the other ptp process on host. Fix it by
disabling SIOCSHWTSTAMP in container.
Fixes: a6111d3c93d0 ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device")
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/8021q/vlan_dev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -368,10 +368,12 @@ static int vlan_dev_ioctl(struct net_dev
ifrr.ifr_ifru = ifr->ifr_ifru;
switch (cmd) {
+ case SIOCSHWTSTAMP:
+ if (!net_eq(dev_net(dev), &init_net))
+ break;
case SIOCGMIIPHY:
case SIOCGMIIREG:
case SIOCSMIIREG:
- case SIOCSHWTSTAMP:
case SIOCGHWTSTAMP:
if (netif_device_present(real_dev) && ops->ndo_do_ioctl)
err = ops->ndo_do_ioctl(real_dev, &ifrr, cmd);
From: Jason Wang <[email protected]>
[ Upstream commit 9871a9e47a2646fe30ae7fd2e67668a8d30912f6 ]
When a queue(tfile) is detached through __tun_detach(), we move the
last enabled tfile to the position where detached one sit but don't
NULL out last position. We expect to synchronize the datapath through
tun->numqueues. Unfortunately, this won't work since we're lacking
sufficient mechanism to order or synchronize the access to
tun->numqueues.
To fix this, NULL out the last position during detaching and check
RCU protected tfile against NULL instead of checking tun->numqueues in
datapath.
Cc: YueHaibing <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: weiyongjun (A) <[email protected]>
Cc: Eric Dumazet <[email protected]>
Fixes: c8d68e6be1c3b ("tuntap: multiqueue support")
Signed-off-by: Jason Wang <[email protected]>
Reviewed-by: Wei Yongjun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -708,6 +708,8 @@ static void __tun_detach(struct tun_file
tun->tfiles[tun->numqueues - 1]);
ntfile = rtnl_dereference(tun->tfiles[index]);
ntfile->queue_index = index;
+ rcu_assign_pointer(tun->tfiles[tun->numqueues - 1],
+ NULL);
--tun->numqueues;
if (clean) {
@@ -1090,7 +1092,7 @@ static netdev_tx_t tun_net_xmit(struct s
tfile = rcu_dereference(tun->tfiles[txq]);
/* Drop packet if interface is not attached */
- if (txq >= tun->numqueues)
+ if (!tfile)
goto drop;
if (!rcu_dereference(tun->steering_prog))
@@ -1281,6 +1283,7 @@ static int tun_xdp_xmit(struct net_devic
rcu_read_lock();
+resample:
numqueues = READ_ONCE(tun->numqueues);
if (!numqueues) {
rcu_read_unlock();
@@ -1289,6 +1292,8 @@ static int tun_xdp_xmit(struct net_devic
tfile = rcu_dereference(tun->tfiles[smp_processor_id() %
numqueues]);
+ if (unlikely(!tfile))
+ goto resample;
spin_lock(&tfile->tx_ring.producer_lock);
for (i = 0; i < n; i++) {
From: Ritesh Raj Sarraf <[email protected]>
commit 9ca19a3a3e2482916c475b90f3d7fa2a03d8e5ed upstream.
The current code fails to run on amd64 because of hardcoded reference to
i386
Signed-off-by: Ritesh Raj Sarraf <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/um/drivers/port_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -168,7 +168,7 @@ int port_connection(int fd, int *socket,
{
int new, err;
char *argv[] = { "/usr/sbin/in.telnetd", "-L",
- "/usr/lib/uml/port-helper", NULL };
+ OS_LIB_PATH "/uml/port-helper", NULL };
struct port_pre_exec_data data;
new = accept(fd, NULL, 0);
From: Jason Wang <[email protected]>
[ Upstream commit a35d310f03a692bf4798eb309a1950a06a150620 ]
We need check if tun->numqueues is zero (e.g for the persist device)
before trying to use it for modular arithmetic.
Reported-by: Eric Dumazet <[email protected]>
Fixes: 96f84061620c6("tun: add eBPF based queue selection method")
Signed-off-by: Jason Wang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -599,13 +599,18 @@ static u16 tun_automq_select_queue(struc
static u16 tun_ebpf_select_queue(struct tun_struct *tun, struct sk_buff *skb)
{
struct tun_prog *prog;
+ u32 numqueues;
u16 ret = 0;
+ numqueues = READ_ONCE(tun->numqueues);
+ if (!numqueues)
+ return 0;
+
prog = rcu_dereference(tun->steering_prog);
if (prog)
ret = bpf_prog_run_clear_cb(prog->prog, skb);
- return ret % tun->numqueues;
+ return ret % numqueues;
}
static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb,
From: Jarod Wilson <[email protected]>
[ Upstream commit a9b8a2b39ce65df45687cf9ef648885c2a99fe75 ]
There's currently a problem with toggling arp_validate on and off with an
active-backup bond. At the moment, you can start up a bond, like so:
modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1
ip link set bond0 down
echo "ens4f0" > /sys/class/net/bond0/bonding/slaves
echo "ens4f1" > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add 192.168.1.2/24 dev bond0
Pings to 192.168.1.1 work just fine. Now turn on arp_validate:
echo 1 > /sys/class/net/bond0/bonding/arp_validate
Pings to 192.168.1.1 continue to work just fine. Now when you go to turn
arp_validate off again, the link falls flat on it's face:
echo 0 > /sys/class/net/bond0/bonding/arp_validate
dmesg
...
[133191.911987] bond0: Setting arp_validate to none (0)
[133194.257793] bond0: bond_should_notify_peers: slave ens4f0
[133194.258031] bond0: link status definitely down for interface ens4f0, disabling it
[133194.259000] bond0: making interface ens4f1 the new active one
[133197.330130] bond0: link status definitely down for interface ens4f1, disabling it
[133197.331191] bond0: now running without any active interface!
The problem lies in bond_options.c, where passing in arp_validate=0
results in bond->recv_probe getting set to NULL. This flies directly in
the face of commit 3fe68df97c7f, which says we need to set recv_probe =
bond_arp_recv, even if we're not using arp_validate. Said commit fixed
this in bond_option_arp_interval_set, but missed that we can get to that
same state in bond_option_arp_validate_set as well.
One solution would be to universally set recv_probe = bond_arp_recv here
as well, but I don't think bond_option_arp_validate_set has any business
touching recv_probe at all, and that should be left to the arp_interval
code, so we can just make things much tidier here.
Fixes: 3fe68df97c7f ("bonding: always set recv_probe to bond_arp_rcv in arp monitor")
CC: Jay Vosburgh <[email protected]>
CC: Veaceslav Falico <[email protected]>
CC: Andy Gospodarek <[email protected]>
CC: "David S. Miller" <[email protected]>
CC: [email protected]
Signed-off-by: Jarod Wilson <[email protected]>
Signed-off-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_options.c | 7 -------
1 file changed, 7 deletions(-)
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -1098,13 +1098,6 @@ static int bond_option_arp_validate_set(
{
netdev_dbg(bond->dev, "Setting arp_validate to %s (%llu)\n",
newval->string, newval->value);
-
- if (bond->dev->flags & IFF_UP) {
- if (!newval->value)
- bond->recv_probe = NULL;
- else if (bond->params.arp_interval)
- bond->recv_probe = bond_arp_rcv;
- }
bond->params.arp_validate = newval->value;
return 0;
From: Dan Carpenter <[email protected]>
commit 6a024330650e24556b8a18cc654ad00cfecf6c6c upstream.
The "param.count" value is a u64 thatcomes from the user. The code
later in the function assumes that param.count is at least one and if
it's not then it leads to an Oops when we dereference the ZERO_SIZE_PTR.
Also the addition can have an integer overflow which would lead us to
allocate a smaller "pages" array than required. I can't immediately
tell what the possible run times implications are, but it's safest to
prevent the overflow.
Link: http://lkml.kernel.org/r/20181218082129.GE32567@kadam
Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Mihai Caraman <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/virt/fsl_hypervisor.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -215,6 +215,9 @@ static long ioctl_memcpy(struct fsl_hv_i
* hypervisor.
*/
lb_offset = param.local_vaddr & (PAGE_SIZE - 1);
+ if (param.count == 0 ||
+ param.count > U64_MAX - lb_offset - PAGE_SIZE + 1)
+ return -EINVAL;
num_pages = (param.count + lb_offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
/* Allocate the buffers we need */
From: Russell Currey <[email protected]>
commit a3f3072db6cad40895c585dce65e36aab997f042 upstream.
Without restoring the IAMR after idle, execution prevention on POWER9
with Radix MMU is overwritten and the kernel can freely execute
userspace without faulting.
This is necessary when returning from any stop state that modifies
user state, as well as hypervisor state.
To test how this fails without this patch, load the lkdtm driver and
do the following:
$ echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT
which won't fault, then boot the kernel with powersave=off, where it
will fault. Applying this patch will fix this.
Fixes: 3b10d0095a1e ("powerpc/mm/radix: Prevent kernel execution of user space")
Cc: [email protected] # v4.10+
Signed-off-by: Russell Currey <[email protected]>
Reviewed-by: Akshay Adiga <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/idle_book3s.S | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -170,6 +170,9 @@ core_idle_lock_held:
bne- core_idle_lock_held
blr
+/* Reuse an unused pt_regs slot for IAMR */
+#define PNV_POWERSAVE_IAMR _DAR
+
/*
* Pass requested state in r3:
* r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8
@@ -200,6 +203,12 @@ pnv_powersave_common:
/* Continue saving state */
SAVE_GPR(2, r1)
SAVE_NVGPRS(r1)
+
+BEGIN_FTR_SECTION
+ mfspr r5, SPRN_IAMR
+ std r5, PNV_POWERSAVE_IAMR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+
mfcr r5
std r5,_CCR(r1)
std r1,PACAR1(r13)
@@ -924,6 +933,17 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
REST_NVGPRS(r1)
REST_GPR(2, r1)
+
+BEGIN_FTR_SECTION
+ /* IAMR was saved in pnv_powersave_common() */
+ ld r5, PNV_POWERSAVE_IAMR(r1)
+ mtspr SPRN_IAMR, r5
+ /*
+ * We don't need an isync here because the upcoming mtmsrd is
+ * execution synchronizing.
+ */
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+
ld r4,PACAKMSR(r13)
ld r5,_LINK(r1)
ld r6,_CCR(r1)
From: Dexuan Cui <[email protected]>
commit 15becc2b56c6eda3d9bf5ae993bafd5661c1fad1 upstream.
When we unload the pci-hyperv host controller driver, the host does not
send us a PCI_EJECT message.
In this case we also need to make sure the sysfs PCI slot directory is
removed, otherwise a command on a slot file eg:
"cat /sys/bus/pci/slots/2/address"
will trigger a
"BUG: unable to handle kernel paging request"
and, if we unload/reload the driver several times we would end up with
stale slot entries in PCI slot directories in /sys/bus/pci/slots/
root@localhost:~# ls -rtl /sys/bus/pci/slots/
total 0
drwxr-xr-x 2 root root 0 Feb 7 10:49 2
drwxr-xr-x 2 root root 0 Feb 7 10:49 2-1
drwxr-xr-x 2 root root 0 Feb 7 10:51 2-2
Add the missing code to remove the PCI slot and fix the current
behaviour.
Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Dexuan Cui <[email protected]>
[[email protected]: reformatted the log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-hyperv.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1491,6 +1491,21 @@ static void hv_pci_assign_slots(struct h
}
}
+/*
+ * Remove entries in sysfs pci slot directory.
+ */
+static void hv_pci_remove_slots(struct hv_pcibus_device *hbus)
+{
+ struct hv_pci_dev *hpdev;
+
+ list_for_each_entry(hpdev, &hbus->children, list_entry) {
+ if (!hpdev->pci_slot)
+ continue;
+ pci_destroy_slot(hpdev->pci_slot);
+ hpdev->pci_slot = NULL;
+ }
+}
+
/**
* create_root_hv_pci_bus() - Expose a new root PCI bus
* @hbus: Root PCI bus, as understood by this driver
@@ -2685,6 +2700,7 @@ static int hv_pci_remove(struct hv_devic
pci_lock_rescan_remove();
pci_stop_root_bus(hbus->pci_bus);
pci_remove_root_bus(hbus->pci_bus);
+ hv_pci_remove_slots(hbus);
pci_unlock_rescan_remove();
hbus->state = hv_pcibus_removed;
}
From: Corentin Labbe <[email protected]>
[ Upstream commit d4c26eb6e721683a0f93e346ce55bc8dc3cbb175 ]
When adding more MAC addresses to a dwmac-sun8i interface, the device goes
directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.
So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.
Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1015,6 +1015,8 @@ static struct mac_device_info *sun8i_dwm
mac->mac = &sun8i_dwmac_ops;
mac->dma = &sun8i_dwmac_dma_ops;
+ priv->dev->priv_flags |= IFF_UNICAST_FLT;
+
/* The loopback bit seems to be re-set when link change
* Simply mask it each time
* Speed 10/100/1000 are set in BIT(2)/BIT(3)
From: David Ahern <[email protected]>
[ Upstream commit 19e4e768064a87b073a4b4c138b55db70e0cfb9f ]
inet_iif should be used for the raw socket lookup. inet_iif considers
rt_iif which handles the case of local traffic.
As it stands, ping to a local address with the '-I <dev>' option fails
ever since ping was changed to use SO_BINDTODEVICE instead of
cmsg + IP_PKTINFO.
IPv6 works fine.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/raw.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -174,6 +174,7 @@ static int icmp_filter(const struct sock
static int raw_v4_input(struct sk_buff *skb, const struct iphdr *iph, int hash)
{
int sdif = inet_sdif(skb);
+ int dif = inet_iif(skb);
struct sock *sk;
struct hlist_head *head;
int delivered = 0;
@@ -186,8 +187,7 @@ static int raw_v4_input(struct sk_buff *
net = dev_net(skb->dev);
sk = __raw_v4_lookup(net, __sk_head(head), iph->protocol,
- iph->saddr, iph->daddr,
- skb->dev->ifindex, sdif);
+ iph->saddr, iph->daddr, dif, sdif);
while (sk) {
delivered = 1;
From: Hangbin Liu <[email protected]>
[ Upstream commit e9919a24d3022f72bcadc407e73a6ef17093a849 ]
With commit 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to
fib_nl_newrule") we now able to check if a rule already exists. But this
only works with iproute2. For other tools like libnl, NetworkManager,
it still could add duplicate rules with only NLM_F_CREATE flag, like
[localhost ~ ]# ip rule
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
100000: from 192.168.7.5 lookup 5
100000: from 192.168.7.5 lookup 5
As it doesn't make sense to create two duplicate rules, let's just return
0 if the rule exists.
Fixes: 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule")
Reported-by: Thomas Haller <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/fib_rules.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -756,9 +756,9 @@ int fib_nl_newrule(struct sk_buff *skb,
if (err)
goto errout;
- if ((nlh->nlmsg_flags & NLM_F_EXCL) &&
- rule_exists(ops, frh, tb, rule)) {
- err = -EEXIST;
+ if (rule_exists(ops, frh, tb, rule)) {
+ if (nlh->nlmsg_flags & NLM_F_EXCL)
+ err = -EEXIST;
goto errout_free;
}
From: Dexuan Cui <[email protected]>
commit 05f151a73ec2b23ffbff706e5203e729a995cdc2 upstream.
When a device is created in new_pcichild_device(), hpdev->refs is set
to 2 (i.e. the initial value of 1 plus the get_pcichild()).
When we hot remove the device from the host, in a Linux VM we first call
hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and
then schedules a work of hv_eject_device_work(), so hpdev->refs becomes
3 (let's ignore the paired get/put_pcichild() in other places). But in
hv_eject_device_work(), currently we only call put_pcichild() twice,
meaning the 'hpdev' struct can't be freed in put_pcichild().
Add one put_pcichild() to fix the memory leak.
The device can also be removed when we run "rmmod pci-hyperv". On this
path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()),
hpdev->refs is 2, and we do correctly call put_pcichild() twice in
pci_devices_present_work().
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <[email protected]>
[[email protected]: commit log rework]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-hyperv.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1905,6 +1905,9 @@ static void hv_eject_device_work(struct
sizeof(*ejct_pkt), (unsigned long)&ctxt.pkt,
VM_PKT_DATA_INBAND, 0);
+ /* For the get_pcichild() in hv_pci_eject_device() */
+ put_pcichild(hpdev);
+ /* For the two refs got in new_pcichild_device() */
put_pcichild(hpdev);
put_pcichild(hpdev);
put_hvpcibus(hpdev->hbus);
From: "Tobin C. Harding" <[email protected]>
[ Upstream commit bdfad5aec1392b93495b77b864d58d7f101dc1c1 ]
Currently error return from kobject_init_and_add() is not followed by a
call to kobject_put(). This means there is a memory leak. We currently
set p to NULL so that kfree() may be called on it as a noop, the code is
arguably clearer if we move the kfree() up closer to where it is
called (instead of after goto jump).
Remove a goto label 'err1' and jump to call to kobject_put() in error
return from kobject_init_and_add() fixing the memory leak. Re-name goto
label 'put_back' to 'err1' now that we don't use err1, following current
nomenclature (err1, err2 ...). Move call to kfree out of the error
code at bottom of function up to closer to where memory was allocated.
Add comment to clarify call to kfree().
Signed-off-by: Tobin C. Harding <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_if.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -603,13 +603,15 @@ int br_add_if(struct net_bridge *br, str
call_netdevice_notifiers(NETDEV_JOIN, dev);
err = dev_set_allmulti(dev, 1);
- if (err)
- goto put_back;
+ if (err) {
+ kfree(p); /* kobject not yet init'd, manually free */
+ goto err1;
+ }
err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
SYSFS_BRIDGE_PORT_ATTR);
if (err)
- goto err1;
+ goto err2;
err = br_sysfs_addif(p);
if (err)
@@ -692,12 +694,9 @@ err3:
sysfs_remove_link(br->ifobj, p->dev->name);
err2:
kobject_put(&p->kobj);
- p = NULL; /* kobject_put frees */
-err1:
dev_set_allmulti(dev, -1);
-put_back:
+err1:
dev_put(dev);
- kfree(p);
return err;
}
From: Dexuan Cui <[email protected]>
commit 340d455699400f2c2c0f9b3f703ade3085cdb501 upstream.
When we hot-remove a device, usually the host sends us a PCI_EJECT message,
and a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.
When we execute the quick hot-add/hot-remove test, the host may not send
us the PCI_EJECT message if the guest has not fully finished the
initialization by sending the PCI_RESOURCES_ASSIGNED* message to the
host, so it's potentially unsafe to only depend on the
pci_destroy_slot() in hv_eject_device_work() because the code path
create_root_hv_pci_bus()
-> hv_pci_assign_slots()
is not called in this case. Note: in this case, the host still sends the
guest a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.
In the quick hot-add/hot-remove test, we can have such a race before
the code path
pci_devices_present_work()
-> new_pcichild_device()
adds the new device into the hbus->children list, we may have already
received the PCI_EJECT message, and since the tasklet handler
hv_pci_onchannelcallback()
may fail to find the "hpdev" by calling
get_pcichild_wslot(hbus, dev_message->wslot.slot)
hv_pci_eject_device() is not called; Later, by continuing execution
create_root_hv_pci_bus()
-> hv_pci_assign_slots()
creates the slot and the PCI_BUS_RELATIONS message with
bus_rel->device_count == 0 removes the device from hbus->children, and
we end up being unable to remove the slot in
hv_pci_remove()
-> hv_pci_remove_slots()
Remove the slot in pci_devices_present_work() when the device
is removed to address this race.
pci_devices_present_work() and hv_eject_device_work() run in the
singled-threaded hbus->wq, so there is not a double-remove issue for the
slot.
We cannot offload hv_pci_eject_device() from hv_pci_onchannelcallback()
to the workqueue, because we need the hv_pci_onchannelcallback()
synchronously call hv_pci_eject_device() to poll the channel
ringbuffer to work around the "hangs in hv_compose_msi_msg()" issue
fixed in commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in
hv_compose_msi_msg()")
Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Dexuan Cui <[email protected]>
[[email protected]: rewritten commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-hyperv.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1781,6 +1781,10 @@ static void pci_devices_present_work(str
hpdev = list_first_entry(&removed, struct hv_pci_dev,
list_entry);
list_del(&hpdev->list_entry);
+
+ if (hpdev->pci_slot)
+ pci_destroy_slot(hpdev->pci_slot);
+
put_pcichild(hpdev);
}
From: Rick Lindsley <[email protected]>
commit f39356261c265a0689d7ee568132d516e8b6cecc upstream.
When the memset code was added to pgd_alloc(), it failed to consider
that kmem_cache_alloc() can return NULL. It's uncommon, but not
impossible under heavy memory contention. Example oops:
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0000000000a4000
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
CPU: 70 PID: 48471 Comm: entrypoint.sh Kdump: loaded Not tainted 4.14.0-115.6.1.el7a.ppc64le #1
task: c000000334a00000 task.stack: c000000331c00000
NIP: c0000000000a4000 LR: c00000000012f43c CTR: 0000000000000020
REGS: c000000331c039c0 TRAP: 0300 Not tainted (4.14.0-115.6.1.el7a.ppc64le)
MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44022840 XER: 20040000
CFAR: c000000000008874 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 1
...
NIP [c0000000000a4000] memset+0x68/0x104
LR [c00000000012f43c] mm_init+0x27c/0x2f0
Call Trace:
mm_init+0x260/0x2f0 (unreliable)
copy_mm+0x11c/0x638
copy_process.isra.28.part.29+0x6fc/0x1080
_do_fork+0xdc/0x4c0
ppc_clone+0x8/0xc
Instruction dump:
409e000c b0860000 38c60002 409d000c 90860000 38c60004 78a0d183 78a506a0
7c0903a6 41820034 60000000 60420000 <f8860000> f8860008 f8860010 f8860018
Fixes: fc5c2f4a55a2 ("powerpc/mm/hash64: Zero PGD pages on allocation")
Cc: [email protected] # v4.16+
Signed-off-by: Rick Lindsley <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/book3s/64/pgalloc.h | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/powerpc/include/asm/book3s/64/pgalloc.h
+++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h
@@ -83,6 +83,9 @@ static inline pgd_t *pgd_alloc(struct mm
pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE),
pgtable_gfp_flags(mm, GFP_KERNEL));
+ if (unlikely(!pgd))
+ return pgd;
+
/*
* Don't scan the PGD for pointers, it contains references to PUDs but
* those references are not full pointers and so can't be recognised by
From: Harini Katakam <[email protected]>
[ Upstream commit 0504453139ef5a593c9587e1e851febee859c7d8 ]
Current order in open:
-> Enable interrupts (macb_init_hw)
-> Enable NAPI
-> Start PHY
Sequence of RX handling:
-> RX interrupt occurs
-> Interrupt is cleared and interrupt bits disabled in handler
-> NAPI is scheduled
-> In NAPI, RX budget is processed and RX interrupts are re-enabled
With the above, on QEMU or fixed link setups (where PHY state doesn't
matter), there's a chance macb RX interrupt occurs before NAPI is
enabled. This will result in NAPI being scheduled before it is enabled.
Fix this macb open by changing the order.
Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues")
Signed-off-by: Harini Katakam <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/cadence/macb_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -2419,12 +2419,12 @@ static int macb_open(struct net_device *
return err;
}
- bp->macbgem_ops.mog_init_rings(bp);
- macb_init_hw(bp);
-
for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
napi_enable(&queue->napi);
+ bp->macbgem_ops.mog_init_rings(bp);
+ macb_init_hw(bp);
+
/* schedule a link state check */
phy_start(dev->phydev);
From: Parthasarathy Bhuvaragan <[email protected]>
[ Upstream commit ff946833b70e0c7f93de9a3f5b329b5ae2287b38 ]
commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets")
introduced a regression for clients using non-blocking sockets.
After the commit, we send EPOLLOUT event to the client even in
TIPC_CONNECTING state. This causes the subsequent send() to fail
with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state.
In this commit, we:
- improve the fix for hanging poll() by replacing sk_data_ready()
with sk_state_change() to wake up all clients.
- revert the faulty updates introduced by commit 517d7c79bdb398
("tipc: fix hanging poll() for stream sockets").
Fixes: 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets")
Signed-off-by: Parthasarathy Bhuvaragan <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/socket.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -726,11 +726,11 @@ static __poll_t tipc_poll(struct file *f
switch (sk->sk_state) {
case TIPC_ESTABLISHED:
- case TIPC_CONNECTING:
if (!tsk->cong_link_cnt && !tsk_conn_cong(tsk))
revents |= EPOLLOUT;
/* fall thru' */
case TIPC_LISTEN:
+ case TIPC_CONNECTING:
if (!skb_queue_empty(&sk->sk_receive_queue))
revents |= EPOLLIN | EPOLLRDNORM;
break;
@@ -2039,7 +2039,7 @@ static bool tipc_sk_filter_connect(struc
return true;
/* If empty 'ACK-' message, wake up sleeping connect() */
- sk->sk_data_ready(sk);
+ sk->sk_state_change(sk);
/* 'ACK-' message is neither accepted nor rejected: */
msg_set_dest_droppable(hdr, 1);
From: Paolo Abeni <[email protected]>
[ Upstream commit c7e0d6cca86581092cbbf2cd868b3601495554cf ]
calling connect(AF_UNSPEC) on an already connected TCP socket is an
established way to disconnect() such socket. After commit 68741a8adab9
("selinux: Fix ltp test connect-syscall failure") it no longer works
and, in the above scenario connect() fails with EAFNOSUPPORT.
Fix the above falling back to the generic/old code when the address family
is not AF_INET{4,6}, but leave the SCTP code path untouched, as it has
specific constraints.
Fixes: 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure")
Reported-by: Tom Deseyn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/hooks.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -4800,7 +4800,7 @@ static int selinux_socket_connect_helper
struct lsm_network_audit net = {0,};
struct sockaddr_in *addr4 = NULL;
struct sockaddr_in6 *addr6 = NULL;
- unsigned short snum;
+ unsigned short snum = 0;
u32 sid, perm;
/* sctp_connectx(3) calls via selinux_sctp_bind_connect()
@@ -4823,12 +4823,12 @@ static int selinux_socket_connect_helper
break;
default:
/* Note that SCTP services expect -EINVAL, whereas
- * others expect -EAFNOSUPPORT.
+ * others must handle this at the protocol level:
+ * connect(AF_UNSPEC) on a connected socket is
+ * a documented way disconnect the socket.
*/
if (sksec->sclass == SECCLASS_SCTP_SOCKET)
return -EINVAL;
- else
- return -EAFNOSUPPORT;
}
err = sel_netport_sid(sk->sk_protocol, snum, &sid);
[ Upstream commit 3c79107631db1f7fd32cf3f7368e4672004a3010 ]
else, we leak the addresses to userspace via ctnetlink events
and dumps.
Compute an ID on demand based on the immutable parts of nf_conn struct.
Another advantage compared to using an address is that there is no
immediate re-use of the same ID in case the conntrack entry is freed and
reallocated again immediately.
Fixes: 3583240249ef ("[NETFILTER]: nf_conntrack_expect: kill unique ID")
Fixes: 7f85f914721f ("[NETFILTER]: nf_conntrack: kill unique ID")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/netfilter/nf_conntrack.h | 2 ++
net/netfilter/nf_conntrack_core.c | 35 ++++++++++++++++++++++++++++
net/netfilter/nf_conntrack_netlink.c | 34 +++++++++++++++++++++++----
3 files changed, 66 insertions(+), 5 deletions(-)
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 7e012312cd610..f45141bdbb837 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -313,6 +313,8 @@ struct nf_conn *nf_ct_tmpl_alloc(struct net *net,
gfp_t flags);
void nf_ct_tmpl_free(struct nf_conn *tmpl);
+u32 nf_ct_get_id(const struct nf_conn *ct);
+
static inline void
nf_ct_set(struct sk_buff *skb, struct nf_conn *ct, enum ip_conntrack_info info)
{
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 9a249478abf28..27eff89fad01c 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -25,6 +25,7 @@
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/jhash.h>
+#include <linux/siphash.h>
#include <linux/err.h>
#include <linux/percpu.h>
#include <linux/moduleparam.h>
@@ -424,6 +425,40 @@ nf_ct_invert_tuple(struct nf_conntrack_tuple *inverse,
}
EXPORT_SYMBOL_GPL(nf_ct_invert_tuple);
+/* Generate a almost-unique pseudo-id for a given conntrack.
+ *
+ * intentionally doesn't re-use any of the seeds used for hash
+ * table location, we assume id gets exposed to userspace.
+ *
+ * Following nf_conn items do not change throughout lifetime
+ * of the nf_conn after it has been committed to main hash table:
+ *
+ * 1. nf_conn address
+ * 2. nf_conn->ext address
+ * 3. nf_conn->master address (normally NULL)
+ * 4. tuple
+ * 5. the associated net namespace
+ */
+u32 nf_ct_get_id(const struct nf_conn *ct)
+{
+ static __read_mostly siphash_key_t ct_id_seed;
+ unsigned long a, b, c, d;
+
+ net_get_random_once(&ct_id_seed, sizeof(ct_id_seed));
+
+ a = (unsigned long)ct;
+ b = (unsigned long)ct->master ^ net_hash_mix(nf_ct_net(ct));
+ c = (unsigned long)ct->ext;
+ d = (unsigned long)siphash(&ct->tuplehash, sizeof(ct->tuplehash),
+ &ct_id_seed);
+#ifdef CONFIG_64BIT
+ return siphash_4u64((u64)a, (u64)b, (u64)c, (u64)d, &ct_id_seed);
+#else
+ return siphash_4u32((u32)a, (u32)b, (u32)c, (u32)d, &ct_id_seed);
+#endif
+}
+EXPORT_SYMBOL_GPL(nf_ct_get_id);
+
static void
clean_from_lists(struct nf_conn *ct)
{
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 036207ecaf166..47e5a076522d8 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -29,6 +29,7 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/siphash.h>
#include <linux/netfilter.h>
#include <net/netlink.h>
@@ -487,7 +488,9 @@ static int ctnetlink_dump_ct_synproxy(struct sk_buff *skb, struct nf_conn *ct)
static int ctnetlink_dump_id(struct sk_buff *skb, const struct nf_conn *ct)
{
- if (nla_put_be32(skb, CTA_ID, htonl((unsigned long)ct)))
+ __be32 id = (__force __be32)nf_ct_get_id(ct);
+
+ if (nla_put_be32(skb, CTA_ID, id))
goto nla_put_failure;
return 0;
@@ -1275,8 +1278,9 @@ static int ctnetlink_del_conntrack(struct net *net, struct sock *ctnl,
}
if (cda[CTA_ID]) {
- u_int32_t id = ntohl(nla_get_be32(cda[CTA_ID]));
- if (id != (u32)(unsigned long)ct) {
+ __be32 id = nla_get_be32(cda[CTA_ID]);
+
+ if (id != (__force __be32)nf_ct_get_id(ct)) {
nf_ct_put(ct);
return -ENOENT;
}
@@ -2675,6 +2679,25 @@ static int ctnetlink_exp_dump_mask(struct sk_buff *skb,
static const union nf_inet_addr any_addr;
+static __be32 nf_expect_get_id(const struct nf_conntrack_expect *exp)
+{
+ static __read_mostly siphash_key_t exp_id_seed;
+ unsigned long a, b, c, d;
+
+ net_get_random_once(&exp_id_seed, sizeof(exp_id_seed));
+
+ a = (unsigned long)exp;
+ b = (unsigned long)exp->helper;
+ c = (unsigned long)exp->master;
+ d = (unsigned long)siphash(&exp->tuple, sizeof(exp->tuple), &exp_id_seed);
+
+#ifdef CONFIG_64BIT
+ return (__force __be32)siphash_4u64((u64)a, (u64)b, (u64)c, (u64)d, &exp_id_seed);
+#else
+ return (__force __be32)siphash_4u32((u32)a, (u32)b, (u32)c, (u32)d, &exp_id_seed);
+#endif
+}
+
static int
ctnetlink_exp_dump_expect(struct sk_buff *skb,
const struct nf_conntrack_expect *exp)
@@ -2722,7 +2745,7 @@ ctnetlink_exp_dump_expect(struct sk_buff *skb,
}
#endif
if (nla_put_be32(skb, CTA_EXPECT_TIMEOUT, htonl(timeout)) ||
- nla_put_be32(skb, CTA_EXPECT_ID, htonl((unsigned long)exp)) ||
+ nla_put_be32(skb, CTA_EXPECT_ID, nf_expect_get_id(exp)) ||
nla_put_be32(skb, CTA_EXPECT_FLAGS, htonl(exp->flags)) ||
nla_put_be32(skb, CTA_EXPECT_CLASS, htonl(exp->class)))
goto nla_put_failure;
@@ -3027,7 +3050,8 @@ static int ctnetlink_get_expect(struct net *net, struct sock *ctnl,
if (cda[CTA_EXPECT_ID]) {
__be32 id = nla_get_be32(cda[CTA_EXPECT_ID]);
- if (ntohl(id) != (u32)(unsigned long)exp) {
+
+ if (id != nf_expect_get_id(exp)) {
nf_ct_expect_put(exp);
return -ENOENT;
}
--
2.20.1
[ Upstream commit becf2319f320cae43e20cf179cc51a355a0deb5f ]
When an icmp error such as pkttoobig is received, conntrack checks
if the "inner" header (header of packet that did not fit link mtu)
is matches an existing connection, and, if so, sets that packet as
being related to the conntrack entry it found.
It was recently reported that this "related" setting also works
if the inner header is from another, different connection (i.e.,
artificial/forged icmp error).
Add a test, followup patch will add additional "inner dst matches
outer dst in reverse direction" check before setting related state.
Link: https://www.synacktiv.com/posts/systems/icmp-reachable.html
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/netfilter/Makefile | 2 +-
.../netfilter/conntrack_icmp_related.sh | 283 ++++++++++++++++++
2 files changed, 284 insertions(+), 1 deletion(-)
create mode 100755 tools/testing/selftests/netfilter/conntrack_icmp_related.sh
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index c9ff2b47bd1ca..a37cb1192c6a6 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for netfilter selftests
-TEST_PROGS := nft_trans_stress.sh nft_nat.sh
+TEST_PROGS := nft_trans_stress.sh nft_nat.sh conntrack_icmp_related.sh
include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
new file mode 100755
index 0000000000000..b48e1833bc896
--- /dev/null
+++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+#
+# check that ICMP df-needed/pkttoobig icmp are set are set as related
+# state
+#
+# Setup is:
+#
+# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2
+# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280).
+# ping nsclient2 from nsclient1, checking that conntrack did set RELATED
+# 'fragmentation needed' icmp packet.
+#
+# In addition, nsrouter1 will perform IP masquerading, i.e. also
+# check the icmp errors are propagated to the correct host as per
+# nat of "established" icmp-echo "connection".
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without nft tool"
+ exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+cleanup() {
+ for i in 1 2;do ip netns del nsclient$i;done
+ for i in 1 2;do ip netns del nsrouter$i;done
+}
+
+ipv4() {
+ echo -n 192.168.$1.2
+}
+
+ipv6 () {
+ echo -n dead:$1::2
+}
+
+check_counter()
+{
+ ns=$1
+ name=$2
+ expect=$3
+ local lret=0
+
+ cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect")
+ if [ $? -ne 0 ]; then
+ echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2
+ ip netns exec $ns nft list counter inet filter "$name" 1>&2
+ lret=1
+ fi
+
+ return $lret
+}
+
+check_unknown()
+{
+ expect="packets 0 bytes 0"
+ for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
+ check_counter $n "unknown" "$expect"
+ if [ $? -ne 0 ] ;then
+ return 1
+ fi
+ done
+
+ return 0
+}
+
+for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
+ ip netns add $n
+ ip -net $n link set lo up
+done
+
+DEV=veth0
+ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1
+DEV=veth0
+ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2
+
+DEV=veth0
+ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2
+
+DEV=veth0
+for i in 1 2; do
+ ip -net nsclient$i link set $DEV up
+ ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV
+ ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV
+done
+
+ip -net nsrouter1 link set eth1 up
+ip -net nsrouter1 link set veth0 up
+
+ip -net nsrouter2 link set eth1 up
+ip -net nsrouter2 link set eth2 up
+
+ip -net nsclient1 route add default via 192.168.1.1
+ip -net nsclient1 -6 route add default via dead:1::1
+
+ip -net nsclient2 route add default via 192.168.2.1
+ip -net nsclient2 route add default via dead:2::1
+
+i=3
+ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1
+ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0
+ip -net nsrouter1 addr add dead:1::1/64 dev eth1
+ip -net nsrouter1 addr add dead:3::1/64 dev veth0
+ip -net nsrouter1 route add default via 192.168.3.10
+ip -net nsrouter1 -6 route add default via dead:3::10
+
+ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1
+ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2
+ip -net nsrouter2 addr add dead:2::1/64 dev eth1
+ip -net nsrouter2 addr add dead:3::10/64 dev eth2
+ip -net nsrouter2 route add default via 192.168.3.1
+ip -net nsrouter2 route add default via dead:3::1
+
+sleep 2
+for i in 4 6; do
+ ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1
+ ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1
+done
+
+for netns in nsrouter1 nsrouter2; do
+ip netns exec $netns nft -f - <<EOF
+table inet filter {
+ counter unknown { }
+ counter related { }
+ chain forward {
+ type filter hook forward priority 0; policy accept;
+ meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept
+ meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept
+ meta l4proto { icmp, icmpv6 } ct state new,established accept
+ counter name "unknown" drop
+ }
+}
+EOF
+done
+
+ip netns exec nsclient1 nft -f - <<EOF
+table inet filter {
+ counter unknown { }
+ counter related { }
+ chain input {
+ type filter hook input priority 0; policy accept;
+ meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+ meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept
+ counter name "unknown" drop
+ }
+}
+EOF
+
+ip netns exec nsclient2 nft -f - <<EOF
+table inet filter {
+ counter unknown { }
+ counter new { }
+ counter established { }
+
+ chain input {
+ type filter hook input priority 0; policy accept;
+ meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+ meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept
+ meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept
+ counter name "unknown" drop
+ }
+ chain output {
+ type filter hook output priority 0; policy accept;
+ meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+ meta l4proto { icmp, icmpv6 } ct state "new" counter name "new"
+ meta l4proto { icmp, icmpv6 } ct state "established" counter name "established"
+ counter name "unknown" drop
+ }
+}
+EOF
+
+
+# make sure NAT core rewrites adress of icmp error if nat is used according to
+# conntrack nat information (icmp error will be directed at nsrouter1 address,
+# but it needs to be routed to nsclient1 address).
+ip netns exec nsrouter1 nft -f - <<EOF
+table ip nat {
+ chain postrouting {
+ type nat hook postrouting priority 0; policy accept;
+ ip protocol icmp oifname "veth0" counter masquerade
+ }
+}
+table ip6 nat {
+ chain postrouting {
+ type nat hook postrouting priority 0; policy accept;
+ ip6 nexthdr icmpv6 oifname "veth0" counter masquerade
+ }
+}
+EOF
+
+ip netns exec nsrouter2 ip link set eth1 mtu 1280
+ip netns exec nsclient2 ip link set veth0 mtu 1280
+sleep 1
+
+ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null
+if [ $? -ne 0 ]; then
+ echo "ERROR: netns ip routing/connectivity broken" 1>&2
+ cleanup
+ exit 1
+fi
+ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null
+if [ $? -ne 0 ]; then
+ echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2
+ cleanup
+ exit 1
+fi
+
+check_unknown
+if [ $? -ne 0 ]; then
+ ret=1
+fi
+
+expect="packets 0 bytes 0"
+for netns in nsrouter1 nsrouter2 nsclient1;do
+ check_counter "$netns" "related" "$expect"
+ if [ $? -ne 0 ]; then
+ ret=1
+ fi
+done
+
+expect="packets 2 bytes 2076"
+check_counter nsclient2 "new" "$expect"
+if [ $? -ne 0 ]; then
+ ret=1
+fi
+
+ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null
+if [ $? -eq 0 ]; then
+ echo "ERROR: ping should have failed with PMTU too big error" 1>&2
+ ret=1
+fi
+
+# nsrouter2 should have generated the icmp error, so
+# related counter should be 0 (its in forward).
+expect="packets 0 bytes 0"
+check_counter "nsrouter2" "related" "$expect"
+if [ $? -ne 0 ]; then
+ ret=1
+fi
+
+# but nsrouter1 should have seen it, same for nsclient1.
+expect="packets 1 bytes 576"
+for netns in nsrouter1 nsclient1;do
+ check_counter "$netns" "related" "$expect"
+ if [ $? -ne 0 ]; then
+ ret=1
+ fi
+done
+
+ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null
+if [ $? -eq 0 ]; then
+ echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2
+ ret=1
+fi
+
+expect="packets 2 bytes 1856"
+for netns in nsrouter1 nsclient1;do
+ check_counter "$netns" "related" "$expect"
+ if [ $? -ne 0 ]; then
+ ret=1
+ fi
+done
+
+if [ $ret -eq 0 ];then
+ echo "PASS: icmp mtu error had RELATED state"
+else
+ echo "ERROR: icmp error RELATED state test has failed"
+fi
+
+cleanup
+exit $ret
--
2.20.1
From: Gustavo A. R. Silva <[email protected]>
commit 84242b82d81c54e009a2aaa74d3d9eff70babf56 upstream.
Add missing break statement in order to prevent the code from falling
through to case 0x1025, and erroneously setting rtlhal->oem_id to
RT_CID_819X_ACER when rtlefuse->eeprom_svid is equal to 0x10EC and
none of the cases in switch (rtlefuse->eeprom_smid) match.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: 238ad2ddf34b ("rtlwifi: rtl8723ae: Clean up the hardware info routine")
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
@@ -1699,6 +1699,7 @@ static void _rtl8723e_read_adapter_info(
rtlhal->oem_id = RT_CID_819X_LENOVO;
break;
}
+ break;
case 0x1025:
rtlhal->oem_id = RT_CID_819X_ACER;
break;
From: Nigel Croxon <[email protected]>
commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef upstream.
Changing state from check_state_check_result to
check_state_compute_result not only is unsafe but also doesn't
appear to serve a valid purpose. A raid6 check should only be
pushing out extra writes if doing repair and a mis-match occurs.
The stripe dev management will already try and do repair writes
for failing sectors.
This patch makes the raid6 check_state_check_result handling
work more like raid5's. If somehow too many failures for a
check, just quit the check operation for the stripe. When any
checks pass, don't try and use check_state_compute_result for
a purpose it isn't needed for and is unsafe for. Just mark the
stripe as in sync for passing its parity checks and let the
stripe dev read/write code and the bad blocks list do their
job handling I/O errors.
Repro steps from Xiao:
These are the steps to reproduce this problem:
1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c
2. insmod scsi_debug.ko dev_size_mb=11000 max_luns=1 num_tgts=1
3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6
sde is the disk created by scsi_debug
4. echo "2" >/sys/module/scsi_debug/parameters/opts
5. raid-check
It panic:
[ 4854.730899] md: data-check of RAID array md127
[ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current]
[ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error
[ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00
[ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0
[ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current]
[ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error
[ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00
[ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000
[ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current]
[ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error
[ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00
[ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000
[ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current]
[ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error
[ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00
[ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0
[ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1).
[ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1).
[ 4854.906201] ------------[ cut here ]------------
[ 4854.907341] kernel BUG at drivers/md/raid5.c:4190!
raid5.c:4190 above is this BUG_ON:
handle_parity_checks6()
...
BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */
Cc: <[email protected]> # v3.16+
OriginalAuthor: David Jeffery <[email protected]>
Cc: Xiao Ni <[email protected]>
Tested-by: David Jeffery <[email protected]>
Signed-off-by: David Jeffy <[email protected]>
Signed-off-by: Nigel Croxon <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid5.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4221,26 +4221,15 @@ static void handle_parity_checks6(struct
case check_state_check_result:
sh->check_state = check_state_idle;
+ if (s->failed > 1)
+ break;
/* handle a successful check operation, if parity is correct
* we are done. Otherwise update the mismatch count and repair
* parity if !MD_RECOVERY_CHECK
*/
if (sh->ops.zero_sum_result == 0) {
- /* both parities are correct */
- if (!s->failed)
- set_bit(STRIPE_INSYNC, &sh->state);
- else {
- /* in contrast to the raid5 case we can validate
- * parity, but still have a failure to write
- * back
- */
- sh->check_state = check_state_compute_result;
- /* Returning at this point means that we may go
- * off and bring p and/or q uptodate again so
- * we make sure to check zero_sum_result again
- * to verify if p or q need writeback
- */
- }
+ /* Any parity checked was correct */
+ set_bit(STRIPE_INSYNC, &sh->state);
} else {
atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) {
[ Upstream commit b191fa96ea6dc00d331dcc28c1f7db5e075693a0 ]
Avoid kretprobe recursion loop bg by setting a dummy
kprobes to current_kprobe per-CPU variable.
This bug has been introduced with the asm-coded trampoline
code, since previously it used another kprobe for hooking
the function return placeholder (which only has a nop) and
trampoline handler was called from that kprobe.
This revives the old lost kprobe again.
With this fix, we don't see deadlock anymore.
And you can see that all inner-called kretprobe are skipped.
event_1 235 0
event_2 19375 19612
The 1st column is recorded count and the 2nd is missed count.
Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed)
(some difference are here because the counter is racy)
Reported-by: Andrea Righi <[email protected]>
Tested-by: Andrea Righi <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Acked-by: Steven Rostedt <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: c9becf58d935 ("[PATCH] kretprobe: kretprobe-booster")
Link: http://lkml.kernel.org/r/155094064889.6137.972160690963039.stgit@devbox
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/kprobes/core.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index acb901b43ce4d..544bc2dfe4082 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -749,11 +749,16 @@ asm(
NOKPROBE_SYMBOL(kretprobe_trampoline);
STACK_FRAME_NON_STANDARD(kretprobe_trampoline);
+static struct kprobe kretprobe_kprobe = {
+ .addr = (void *)kretprobe_trampoline,
+};
+
/*
* Called from kretprobe_trampoline
*/
__visible __used void *trampoline_handler(struct pt_regs *regs)
{
+ struct kprobe_ctlblk *kcb;
struct kretprobe_instance *ri = NULL;
struct hlist_head *head, empty_rp;
struct hlist_node *tmp;
@@ -763,6 +768,17 @@ __visible __used void *trampoline_handler(struct pt_regs *regs)
void *frame_pointer;
bool skipped = false;
+ preempt_disable();
+
+ /*
+ * Set a dummy kprobe for avoiding kretprobe recursion.
+ * Since kretprobe never run in kprobe handler, kprobe must not
+ * be running at this point.
+ */
+ kcb = get_kprobe_ctlblk();
+ __this_cpu_write(current_kprobe, &kretprobe_kprobe);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
INIT_HLIST_HEAD(&empty_rp);
kretprobe_hash_lock(current, &head, &flags);
/* fixup registers */
@@ -838,10 +854,9 @@ __visible __used void *trampoline_handler(struct pt_regs *regs)
orig_ret_address = (unsigned long)ri->ret_addr;
if (ri->rp && ri->rp->handler) {
__this_cpu_write(current_kprobe, &ri->rp->kp);
- get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
ri->ret_addr = correct_ret_addr;
ri->rp->handler(ri, regs);
- __this_cpu_write(current_kprobe, NULL);
+ __this_cpu_write(current_kprobe, &kretprobe_kprobe);
}
recycle_rp_inst(ri, &empty_rp);
@@ -857,6 +872,9 @@ __visible __used void *trampoline_handler(struct pt_regs *regs)
kretprobe_hash_unlock(current, &flags);
+ __this_cpu_write(current_kprobe, NULL);
+ preempt_enable();
+
hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
hlist_del(&ri->hlist);
kfree(ri);
--
2.20.1
From: Wei Yongjun <[email protected]>
commit 51c8d24101c79ffce3e79137e2cee5dfeb956dd7 upstream.
Add the missing unlock before return from function cw1200_hw_scan()
in the error handling case.
Fixes: 4f68ef64cd7f ("cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()")
Signed-off-by: Wei Yongjun <[email protected]>
Acked-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/st/cw1200/scan.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/st/cw1200/scan.c
+++ b/drivers/net/wireless/st/cw1200/scan.c
@@ -84,8 +84,11 @@ int cw1200_hw_scan(struct ieee80211_hw *
frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
req->ie_len);
- if (!frame.skb)
+ if (!frame.skb) {
+ mutex_unlock(&priv->conf_mutex);
+ up(&priv->scan.lock);
return -ENOMEM;
+ }
if (req->ie_len)
skb_put_data(frame.skb, req->ie, req->ie_len);
From: Stephen Suryaputra <[email protected]>
[ Upstream commit ff6ab32bd4e073976e4d8797b4d514a172cfe6cb ]
VRF netdev mtu isn't typically set and have an mtu of 65536. When the
link of a tunnel is set, the tunnel mtu is changed from 1480 to the link
mtu minus tunnel header. In the case of VRF netdev is the link, then the
tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in
this case.
Signed-off-by: Stephen Suryaputra <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1084,7 +1084,7 @@ static void ipip6_tunnel_bind_dev(struct
if (!tdev && tunnel->parms.link)
tdev = __dev_get_by_index(tunnel->net, tunnel->parms.link);
- if (tdev) {
+ if (tdev && !netif_is_l3_master(tdev)) {
int t_hlen = tunnel->hlen + sizeof(struct iphdr);
dev->hard_header_len = tdev->hard_header_len + sizeof(struct iphdr);
[ Upstream commit 4a9c2e3746e6151fd5d077259d79ce9ca86d47d7 ]
This reverts the first part of commit 4e485d06bb8c ("strparser: Call
skb_unclone conditionally"). To build a message with multiple
fragments we need our own root of frag_list. We can't simply
use the frag_list of orig_skb, because it will lead to linking
all orig_skbs together creating very long frag chains, and causing
stack overflow on kfree_skb() (which is called recursively on
the frag_lists).
BUG: stack guard page was hit at 00000000d40fad41 (stack is 0000000029dde9f4..000000008cce03d5)
kernel stack overflow (double-fault): 0000 [#1] PREEMPT SMP
RIP: 0010:free_one_page+0x2b/0x490
Call Trace:
__free_pages_ok+0x143/0x2c0
skb_release_data+0x8e/0x140
? skb_release_data+0xad/0x140
kfree_skb+0x32/0xb0
[...]
skb_release_data+0xad/0x140
? skb_release_data+0xad/0x140
kfree_skb+0x32/0xb0
skb_release_data+0xad/0x140
? skb_release_data+0xad/0x140
kfree_skb+0x32/0xb0
skb_release_data+0xad/0x140
? skb_release_data+0xad/0x140
kfree_skb+0x32/0xb0
skb_release_data+0xad/0x140
? skb_release_data+0xad/0x140
kfree_skb+0x32/0xb0
skb_release_data+0xad/0x140
__kfree_skb+0xe/0x20
tcp_disconnect+0xd6/0x4d0
tcp_close+0xf4/0x430
? tcp_check_oom+0xf0/0xf0
tls_sk_proto_close+0xe4/0x1e0 [tls]
inet_release+0x36/0x60
__sock_release+0x37/0xa0
sock_close+0x11/0x20
__fput+0xa2/0x1d0
task_work_run+0x89/0xb0
exit_to_usermode_loop+0x9a/0xa0
do_syscall_64+0xc0/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Let's leave the second unclone conditional, as I'm not entirely
sure what is its purpose :)
Fixes: 4e485d06bb8c ("strparser: Call skb_unclone conditionally")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Dirk van der Merwe <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/strparser/strparser.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/net/strparser/strparser.c b/net/strparser/strparser.c
index da1a676860cad..0f4e427928781 100644
--- a/net/strparser/strparser.c
+++ b/net/strparser/strparser.c
@@ -140,13 +140,11 @@ static int __strp_recv(read_descriptor_t *desc, struct sk_buff *orig_skb,
/* We are going to append to the frags_list of head.
* Need to unshare the frag_list.
*/
- if (skb_has_frag_list(head)) {
- err = skb_unclone(head, GFP_ATOMIC);
- if (err) {
- STRP_STATS_INCR(strp->stats.mem_fail);
- desc->error = err;
- return 0;
- }
+ err = skb_unclone(head, GFP_ATOMIC);
+ if (err) {
+ STRP_STATS_INCR(strp->stats.mem_fail);
+ desc->error = err;
+ return 0;
}
if (unlikely(skb_shinfo(head)->frag_list)) {
--
2.20.1
[ Upstream commit b442fed1b724af0de087912a5718ddde1b87acbb ]
The workqueue is used to periodically update the networking stack about
activity / statistics of various objects such as neighbours and TC
actions.
It should not be called as part of memory reclaim path, so remove the
WQ_MEM_RECLAIM flag.
Fixes: 3d5479e92087 ("mlxsw: core: Remove deprecated create_workqueue")
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index 7482db0767afb..2e6df5804b356 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -1875,7 +1875,7 @@ static int __init mlxsw_core_module_init(void)
{
int err;
- mlxsw_wq = alloc_workqueue(mlxsw_core_driver_name, WQ_MEM_RECLAIM, 0);
+ mlxsw_wq = alloc_workqueue(mlxsw_core_driver_name, 0, 0);
if (!mlxsw_wq)
return -ENOMEM;
mlxsw_owq = alloc_ordered_workqueue("%s_ordered", 0,
--
2.20.1
From: Christophe Leroy <[email protected]>
[ Upstream commit ee0df19305d9fabd9479b785918966f6e25b733b ]
When changing the number of buffers in the RX ring while the interface
is running, the following Oops is encountered due to the new number
of buffers being taken into account immediately while their allocation
is done when opening the device only.
[ 69.882706] Unable to handle kernel paging request for data at address 0xf0000100
[ 69.890172] Faulting instruction address: 0xc033e164
[ 69.895122] Oops: Kernel access of bad area, sig: 11 [#1]
[ 69.900494] BE PREEMPT CMPCPRO
[ 69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269
[ 69.915956] task: c0684310 task.stack: c06da000
[ 69.920470] NIP: c033e164 LR: c02e44d0 CTR: c02e41fc
[ 69.925504] REGS: dfff1e20 TRAP: 0300 Not tainted (4.14.115-00006-g179ade8ce3-dirty)
[ 69.934161] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 22004428 XER: 20000000
[ 69.940869] DAR: f0000100 DSISR: 20000000
[ 69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f
[ 69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0
[ 69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001
[ 69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044
[ 69.978348] NIP [c033e164] skb_put+0x0/0x5c
[ 69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8
[ 69.987384] Call Trace:
[ 69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable)
[ 69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c
[ 70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310
[ 70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4
[ 70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c
[ 70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4
[ 70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14
[ 70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90
[ 70.027964] LR = rcu_idle_exit+0x74/0x90
[ 70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable)
[ 70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c
[ 70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c
[ 70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384
[ 70.059153] [c06dbff0] [00003438] 0x3438
[ 70.063062] Instruction dump:
[ 70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910
[ 70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910
[ 70.081690] ---[ end trace be7ccd9c1e1a9f12 ]---
This patch forbids the modification of the number of buffers in the
ring while the interface is running.
Fixes: ac421852b3a0 ("ucc_geth: add ethtool support")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/ucc_geth_ethtool.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
+++ b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
@@ -252,14 +252,12 @@ uec_set_ringparam(struct net_device *net
return -EINVAL;
}
+ if (netif_running(netdev))
+ return -EBUSY;
+
ug_info->bdRingLenRx[queue] = ring->rx_pending;
ug_info->bdRingLenTx[queue] = ring->tx_pending;
- if (netif_running(netdev)) {
- /* FIXME: restart automatically */
- netdev_info(netdev, "Please re-open the interface\n");
- }
-
return ret;
}
[ Upstream commit b25a31bf0ca091aa8bdb9ab329b0226257568bbe ]
->release_ops() callback releases resources and this is used in error path.
If nf_tables_newrule() fails after ->select_ops(), it should release
resources. but it can not call ->destroy() because that should be called
after ->init().
At this point, ->release_ops() should be used for releasing resources.
Test commands:
modprobe -rv xt_tcpudp
iptables-nft -I INPUT -m tcp <-- error command
lsmod
Result:
Module Size Used by
xt_tcpudp 20480 2 <-- it should be 0
Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_tables_api.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index ef7ff13a7b992..ebfcfe1dcbdbb 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2719,8 +2719,11 @@ static int nf_tables_newrule(struct net *net, struct sock *nlsk,
nf_tables_rule_release(&ctx, rule);
err1:
for (i = 0; i < n; i++) {
- if (info[i].ops != NULL)
+ if (info[i].ops) {
module_put(info[i].ops->type->owner);
+ if (info[i].ops->type->release_ops)
+ info[i].ops->type->release_ops(info[i].ops);
+ }
}
kvfree(info);
return err;
--
2.20.1
[ Upstream commit 7a223e06b1a411cef6c4cd7a9b9a33c8d225b10e ]
In __apic_accept_irq() interface trig_mode is int and actually on some code
paths it is set above u8:
kvm_apic_set_irq() extracts it from 'struct kvm_lapic_irq' where trig_mode
is u16. This is done on purpose as e.g. kvm_set_msi_irq() sets it to
(1 << 15) & e->msi.data
kvm_apic_local_deliver sets it to reg & (1 << 15).
Fix the immediate issue by making 'tm' into u16. We may also want to adjust
__apic_accept_irq() interface and use proper sizes for vector, level,
trig_mode but this is not urgent.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/trace.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 0f997683404fa..b3f219b7c8408 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -438,13 +438,13 @@ TRACE_EVENT(kvm_apic_ipi,
);
TRACE_EVENT(kvm_apic_accept_irq,
- TP_PROTO(__u32 apicid, __u16 dm, __u8 tm, __u8 vec),
+ TP_PROTO(__u32 apicid, __u16 dm, __u16 tm, __u8 vec),
TP_ARGS(apicid, dm, tm, vec),
TP_STRUCT__entry(
__field( __u32, apicid )
__field( __u16, dm )
- __field( __u8, tm )
+ __field( __u16, tm )
__field( __u8, vec )
),
--
2.20.1
[ Upstream commit 4af0699782e2cc7d0d89db9eb6f8844dd3df82dc ]
The ordered workqueue is used to offload various objects such as routes
and neighbours in the order they are notified.
It should not be called as part of memory reclaim path, so remove the
WQ_MEM_RECLAIM flag. This can also result in a warning [1], if a worker
tries to flush a non-WQ_MEM_RECLAIM workqueue.
[1]
[97703.542861] workqueue: WQ_MEM_RECLAIM mlxsw_core_ordered:mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] is flushing !WQ_MEM_RECLAIM events:rht_deferred_worker
[97703.542884] WARNING: CPU: 1 PID: 32492 at kernel/workqueue.c:2605 check_flush_dependency+0xb5/0x130
...
[97703.542988] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
[97703.543049] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib6_event_work [mlxsw_spectrum]
[97703.543061] RIP: 0010:check_flush_dependency+0xb5/0x130
...
[97703.543071] RSP: 0018:ffffb3f08137bc00 EFLAGS: 00010086
[97703.543076] RAX: 0000000000000000 RBX: ffff96e07740ae00 RCX: 0000000000000000
[97703.543080] RDX: 0000000000000094 RSI: ffffffff82dc1934 RDI: 0000000000000046
[97703.543084] RBP: ffffb3f08137bc20 R08: ffffffff82dc18a0 R09: 00000000000225c0
[97703.543087] R10: 0000000000000000 R11: 0000000000007eec R12: ffffffff816e4ee0
[97703.543091] R13: ffff96e06f6a5c00 R14: ffff96e077ba7700 R15: ffffffff812ab0c0
[97703.543097] FS: 0000000000000000(0000) GS:ffff96e077a80000(0000) knlGS:0000000000000000
[97703.543101] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[97703.543104] CR2: 00007f8cd135b280 CR3: 00000001e860e003 CR4: 00000000003606e0
[97703.543109] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[97703.543112] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[97703.543115] Call Trace:
[97703.543129] __flush_work+0xbd/0x1e0
[97703.543137] ? __cancel_work_timer+0x136/0x1b0
[97703.543145] ? pwq_dec_nr_in_flight+0x49/0xa0
[97703.543154] __cancel_work_timer+0x136/0x1b0
[97703.543175] ? mlxsw_reg_trans_bulk_wait+0x145/0x400 [mlxsw_core]
[97703.543184] cancel_work_sync+0x10/0x20
[97703.543191] rhashtable_free_and_destroy+0x23/0x140
[97703.543198] rhashtable_destroy+0xd/0x10
[97703.543254] mlxsw_sp_fib_destroy+0xb1/0xf0 [mlxsw_spectrum]
[97703.543310] mlxsw_sp_vr_put+0xa8/0xc0 [mlxsw_spectrum]
[97703.543364] mlxsw_sp_fib_node_put+0xbf/0x140 [mlxsw_spectrum]
[97703.543418] ? mlxsw_sp_fib6_entry_destroy+0xe8/0x110 [mlxsw_spectrum]
[97703.543475] mlxsw_sp_router_fib6_event_work+0x6cd/0x7f0 [mlxsw_spectrum]
[97703.543484] process_one_work+0x1fd/0x400
[97703.543493] worker_thread+0x34/0x410
[97703.543500] kthread+0x121/0x140
[97703.543507] ? process_one_work+0x400/0x400
[97703.543512] ? kthread_park+0x90/0x90
[97703.543523] ret_from_fork+0x35/0x40
Fixes: a3832b31898f ("mlxsw: core: Create an ordered workqueue for FIB offload")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Semion Lisyansky <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index 426aea8ad72c4..7482db0767afb 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -1878,7 +1878,7 @@ static int __init mlxsw_core_module_init(void)
mlxsw_wq = alloc_workqueue(mlxsw_core_driver_name, WQ_MEM_RECLAIM, 0);
if (!mlxsw_wq)
return -ENOMEM;
- mlxsw_owq = alloc_ordered_workqueue("%s_ordered", WQ_MEM_RECLAIM,
+ mlxsw_owq = alloc_ordered_workqueue("%s_ordered", 0,
mlxsw_core_driver_name);
if (!mlxsw_owq) {
err = -ENOMEM;
--
2.20.1
[ Upstream commit a8fd48b50deaa20808bbf0f6685f6f1acba6a64c ]
Preemption disabled at:
[<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38
Call trace:
[<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0
[<ffff00000808a9a4>] show_stack+0x14/0x20
[<ffff000008e6c0c0>] dump_stack+0xac/0xe4
[<ffff0000080fe76c>] ___might_sleep+0x164/0x238
[<ffff0000080fe890>] __might_sleep+0x50/0x88
[<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0
[<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188 [mscc_ocelot_common]
[<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0
[<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Claudiu Manoil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 0bdd3c400c92f..10291198decd6 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -605,7 +605,7 @@ static int ocelot_mact_mc_add(struct ocelot_port *port,
struct netdev_hw_addr *hw_addr)
{
struct ocelot *ocelot = port->ocelot;
- struct netdev_hw_addr *ha = kzalloc(sizeof(*ha), GFP_KERNEL);
+ struct netdev_hw_addr *ha = kzalloc(sizeof(*ha), GFP_ATOMIC);
if (!ha)
return -ENOMEM;
--
2.20.1
[ Upstream commit cae85cb8add35f678cf487139d05e083ce2f570a ]
Aneesh has reported that PPC triggers the following warning when
excercising DAX code:
IP set_pte_at+0x3c/0x190
LR insert_pfn+0x208/0x280
Call Trace:
insert_pfn+0x68/0x280
dax_iomap_pte_fault.isra.7+0x734/0xa40
__xfs_filemap_fault+0x280/0x2d0
do_wp_page+0x48c/0xa40
__handle_mm_fault+0x8d0/0x1fd0
handle_mm_fault+0x140/0x250
__do_page_fault+0x300/0xd60
handle_page_fault+0x18
Now that is WARN_ON in set_pte_at which is
VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep));
The problem is that on some architectures set_pte_at() cannot cope with
a situation where there is already some (different) valid entry present.
Use ptep_set_access_flags() instead to modify the pfn which is built to
deal with modifying existing PTE.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: b2770da64254 "mm: add vm_insert_mixed_mkwrite()"
Signed-off-by: Jan Kara <[email protected]>
Reported-by: "Aneesh Kumar K.V" <[email protected]>
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Acked-by: Dan Williams <[email protected]>
Cc: Chandan Rajendra <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/memory.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/mm/memory.c b/mm/memory.c
index 9c69278173b78..e0010cb870e05 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1796,10 +1796,12 @@ static int insert_pfn(struct vm_area_struct *vma, unsigned long addr,
WARN_ON_ONCE(!is_zero_pfn(pte_pfn(*pte)));
goto out_unlock;
}
- entry = *pte;
- goto out_mkwrite;
- } else
- goto out_unlock;
+ entry = pte_mkyoung(*pte);
+ entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+ if (ptep_set_access_flags(vma, addr, pte, entry, 1))
+ update_mmu_cache(vma, addr, pte);
+ }
+ goto out_unlock;
}
/* Ok, finally just insert the thing.. */
@@ -1808,7 +1810,6 @@ static int insert_pfn(struct vm_area_struct *vma, unsigned long addr,
else
entry = pte_mkspecial(pfn_t_pte(pfn, prot));
-out_mkwrite:
if (mkwrite) {
entry = pte_mkyoung(entry);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
--
2.20.1
[ Upstream commit 5ceaeb99ffb4dc002d20f6ac243c19a85e2c7a76 ]
This patches fixes few issues in mv88e6390x_port_set_cmode().
1. When entering the function the old cmode may be 0, in this case
mv88e6390x_serdes_get_lane() returns -ENODEV. As result we bail
out and have no chance to set a new mode. Therefore deal properly
with -ENODEV.
2. Once we have disabled power and irq, let's set the cached cmode to 0.
This reflects the actual status and is cleaner if we bail out with an
error in the following function calls.
3. The cached cmode is used by mv88e6390x_serdes_get_lane(),
mv88e6390_serdes_power_lane() and mv88e6390_serdes_irq_enable().
Currently we set the cached mode to the new one at the very end of
the function only, means until then we use the old one what may be
wrong.
4. When calling mv88e6390_serdes_irq_enable() we use the lane value
belonging to the old cmode. Get the lane belonging to the new cmode
before calling this function.
It's hard to provide a good "Fixes" tag because quite a few smaller
changes have been done to the code in question recently.
Fixes: d235c48b40d3 ("net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X")
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/mv88e6xxx/port.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index 7fffce734f0a5..fdeddbfa829da 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -379,18 +379,22 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
return 0;
lane = mv88e6390x_serdes_get_lane(chip, port);
- if (lane < 0)
+ if (lane < 0 && lane != -ENODEV)
return lane;
- if (chip->ports[port].serdes_irq) {
- err = mv88e6390_serdes_irq_disable(chip, port, lane);
+ if (lane >= 0) {
+ if (chip->ports[port].serdes_irq) {
+ err = mv88e6390_serdes_irq_disable(chip, port, lane);
+ if (err)
+ return err;
+ }
+
+ err = mv88e6390x_serdes_power(chip, port, false);
if (err)
return err;
}
- err = mv88e6390x_serdes_power(chip, port, false);
- if (err)
- return err;
+ chip->ports[port].cmode = 0;
if (cmode) {
err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®);
@@ -404,6 +408,12 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
if (err)
return err;
+ chip->ports[port].cmode = cmode;
+
+ lane = mv88e6390x_serdes_get_lane(chip, port);
+ if (lane < 0)
+ return lane;
+
err = mv88e6390x_serdes_power(chip, port, true);
if (err)
return err;
@@ -415,8 +425,6 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
}
}
- chip->ports[port].cmode = cmode;
-
return 0;
}
--
2.20.1
[ Upstream commit 2557fabd6e29f349bfa0ac13f38ac98aa5eafc74 ]
When the maximum send wr delivered by the user is zero, the qp does not
have a sq.
When allocating the sq db buffer to store the user sq pi pointer and map
it to the kernel mode, max_send_wr is used as the trigger condition, while
the kernel does not consider the max_send_wr trigger condition when
mapmping db. It will cause sq record doorbell map fail and create qp fail.
The failed print information as follows:
hns3 0000:7d:00.1: Send cmd: tail - 418, opcode - 0x8504, flag - 0x0011, retval - 0x0000
hns3 0000:7d:00.1: Send cmd: 0xe59dc000 0x00000000 0x00000000 0x00000000 0x00000116 0x0000ffff
hns3 0000:7d:00.1: sq record doorbell map failed!
hns3 0000:7d:00.1: Create RC QP failed
Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Lijun Ou <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_qp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c
index efb7e961ca651..2fa4fb17f6d3c 100644
--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -494,7 +494,7 @@ static int hns_roce_set_kernel_sq_size(struct hns_roce_dev *hr_dev,
static int hns_roce_qp_has_sq(struct ib_qp_init_attr *attr)
{
- if (attr->qp_type == IB_QPT_XRC_TGT)
+ if (attr->qp_type == IB_QPT_XRC_TGT || !attr->cap.max_send_wr)
return 0;
return 1;
--
2.20.1
[ Upstream commit e02bc29b2cfa7806830d6da8b2322cddd67e8dfe ]
Our components may still be using the DRM device driver (if only to
access our driver's private data), so make sure to unbind them before
the final drm_dev_put.
Also release our reserved memory after component unbind instead of
before to match reverse creation order.
Fixes: f5a9ed867c83 ("drm/sun4i: Fix component unbinding and component master deletion")
Signed-off-by: Paul Kocialkowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_drv.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 62703630090aa..57f61ec4bc6be 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -158,10 +158,11 @@ static void sun4i_drv_unbind(struct device *dev)
drm_kms_helper_poll_fini(drm);
sun4i_framebuffer_free(drm);
drm_mode_config_cleanup(drm);
- of_reserved_mem_device_release(dev);
- drm_dev_put(drm);
component_unbind_all(dev, NULL);
+ of_reserved_mem_device_release(dev);
+
+ drm_dev_put(drm);
}
static const struct component_master_ops sun4i_drv_master_ops = {
--
2.20.1
[ Upstream commit d48668052b2603b6262459625c86108c493588dd ]
It doesn't log a packet if sysctl_log_invalid isn't equal to protonum
OR sysctl_log_invalid isn't equal to IPPROTO_RAW. This sentence is
always true. I believe we need to replace OR to AND.
Cc: Florian Westphal <[email protected]>
Fixes: c4f3db1595827 ("netfilter: conntrack: add and use nf_l4proto_log_invalid")
Signed-off-by: Andrei Vagin <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conntrack_proto.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nf_conntrack_proto.c b/net/netfilter/nf_conntrack_proto.c
index 51c5d7eec0a35..e903ef9b96cf3 100644
--- a/net/netfilter/nf_conntrack_proto.c
+++ b/net/netfilter/nf_conntrack_proto.c
@@ -86,7 +86,7 @@ void nf_l4proto_log_invalid(const struct sk_buff *skb,
struct va_format vaf;
va_list args;
- if (net->ct.sysctl_log_invalid != protonum ||
+ if (net->ct.sysctl_log_invalid != protonum &&
net->ct.sysctl_log_invalid != IPPROTO_RAW)
return;
--
2.20.1
[ Upstream commit 7bcde275eb1d0ac8793c77c7e666a886eb16633d ]
In order to make sure that the plane color space gets reset correctly.
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/imx/ipuv3-crtc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index 7d4b710b837ac..11e2dcdd6b18c 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -78,7 +78,7 @@ static void ipu_crtc_disable_planes(struct ipu_crtc *ipu_crtc,
if (disable_partial)
ipu_plane_disable(ipu_crtc->plane[1], true);
if (disable_full)
- ipu_plane_disable(ipu_crtc->plane[0], false);
+ ipu_plane_disable(ipu_crtc->plane[0], true);
}
static void ipu_crtc_atomic_disable(struct drm_crtc *crtc,
--
2.20.1
[ Upstream commit a8c133b06183c529c51cd0d54eb57d6b7078370c ]
The EMAD workqueue is used to handle retransmission of EMAD packets that
contain configuration data for the device's firmware.
Given the workers need to allocate these packets and that the code is
not called as part of memory reclaim path, remove the WQ_MEM_RECLAIM
flag.
Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock")
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index f7154f358f276..426aea8ad72c4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -568,7 +568,7 @@ static int mlxsw_emad_init(struct mlxsw_core *mlxsw_core)
if (!(mlxsw_core->bus->features & MLXSW_BUS_F_TXRX))
return 0;
- emad_wq = alloc_workqueue("mlxsw_core_emad", WQ_MEM_RECLAIM, 0);
+ emad_wq = alloc_workqueue("mlxsw_core_emad", 0, 0);
if (!emad_wq)
return -ENOMEM;
mlxsw_core->emad_wq = emad_wq;
--
2.20.1
[ Upstream commit d4d0e40977ac450f32f2db5e4d8e23c9d2578899 ]
The driver cannot guarantee in the prepare phase that it will be able to
write an MDB entry to the device. In case the driver returned success
during the prepare phase, but then failed to add the entry in the commit
phase, a WARNING [1] will be generated by the switchdev core.
Fix this by doing the work in the prepare phase instead.
[1]
[ 358.544486] swp12s0: Commit of object (id=2) failed.
[ 358.550061] WARNING: CPU: 0 PID: 30 at net/switchdev/switchdev.c:281 switchdev_port_obj_add_now+0x9b/0xe0
[ 358.560754] CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 5.0.0-custom-13382-gf2449babf221 #1350
[ 358.570472] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ 358.580582] Workqueue: events switchdev_deferred_process_work
[ 358.587001] RIP: 0010:switchdev_port_obj_add_now+0x9b/0xe0
...
[ 358.614109] RSP: 0018:ffffa6b900d6fe18 EFLAGS: 00010286
[ 358.619943] RAX: 0000000000000000 RBX: ffff8b00797ff000 RCX: 0000000000000000
[ 358.627912] RDX: ffff8b00b7a1d4c0 RSI: ffff8b00b7a152e8 RDI: ffff8b00b7a152e8
[ 358.635881] RBP: ffff8b005c3f5bc0 R08: 000000000000022b R09: 0000000000000000
[ 358.643850] R10: 0000000000000000 R11: ffffa6b900d6fcc8 R12: 0000000000000000
[ 358.651819] R13: dead000000000100 R14: ffff8b00b65a23c0 R15: 0ffff8b00b7a2200
[ 358.659790] FS: 0000000000000000(0000) GS:ffff8b00b7a00000(0000) knlGS:0000000000000000
[ 358.668820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 358.675228] CR2: 00007f00aad90de0 CR3: 00000001ca80d000 CR4: 00000000001006f0
[ 358.683188] Call Trace:
[ 358.685918] switchdev_port_obj_add_deferred+0x13/0x60
[ 358.691655] switchdev_deferred_process+0x6b/0xf0
[ 358.696907] switchdev_deferred_process_work+0xa/0x10
[ 358.702548] process_one_work+0x1f5/0x3f0
[ 358.707022] worker_thread+0x28/0x3c0
[ 358.711099] ? process_one_work+0x3f0/0x3f0
[ 358.715768] kthread+0x10d/0x130
[ 358.719369] ? __kthread_create_on_node+0x180/0x180
[ 358.724815] ret_from_fork+0x35/0x40
Fixes: 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Alex Kushnarov <[email protected]>
Tested-by: Alex Kushnarov <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index af673abdb4823..a4f237f815d1a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -1585,7 +1585,7 @@ static int mlxsw_sp_port_mdb_add(struct mlxsw_sp_port *mlxsw_sp_port,
u16 fid_index;
int err = 0;
- if (switchdev_trans_ph_prepare(trans))
+ if (switchdev_trans_ph_commit(trans))
return 0;
bridge_port = mlxsw_sp_bridge_port_find(mlxsw_sp->bridge, orig_dev);
--
2.20.1
[ Upstream commit 3f3a390dbd59d236f62cff8e8b20355ef7069e3d ]
Smatch reports:
net/netfilter/nf_tables_api.c:2167 nf_tables_expr_destroy()
error: dereferencing freed memory 'expr->ops'
net/netfilter/nf_tables_api.c
2162 static void nf_tables_expr_destroy(const struct nft_ctx *ctx,
2163 struct nft_expr *expr)
2164 {
2165 if (expr->ops->destroy)
2166 expr->ops->destroy(ctx, expr);
^^^^
--> 2167 module_put(expr->ops->type->owner);
^^^^^^^^^
2168 }
Smatch says there are three functions which free expr->ops.
Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_tables_api.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index f272f9538c44a..ef7ff13a7b992 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2113,9 +2113,11 @@ static int nf_tables_newexpr(const struct nft_ctx *ctx,
static void nf_tables_expr_destroy(const struct nft_ctx *ctx,
struct nft_expr *expr)
{
+ const struct nft_expr_type *type = expr->ops->type;
+
if (expr->ops->destroy)
expr->ops->destroy(ctx, expr);
- module_put(expr->ops->type->owner);
+ module_put(type->owner);
}
struct nft_expr *nft_expr_init(const struct nft_ctx *ctx,
--
2.20.1
[ Upstream commit c3143967807adb1357c36b68a7563fc0c4e1f615 ]
When CONFIG_ARM_MPU is not defined, the base address of v7M SCB register
is not initialized with correct value. This prevents enabling I/D caches
when the L1 cache poilcy is applied in kernel.
Fixes: 3c24121039c9da14692eb48f6e39565b28c0f3cf ("ARM: 8756/1: NOMMU: Postpone MPU activation till __after_proc_init")
Signed-off-by: Tigran Tadevosyan <[email protected]>
Signed-off-by: Vladimir Murzin <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/head-nommu.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index ec29de2500764..cab89479d15ef 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -133,9 +133,9 @@ __secondary_data:
*/
.text
__after_proc_init:
-#ifdef CONFIG_ARM_MPU
M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB)
M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB)
+#ifdef CONFIG_ARM_MPU
M_CLASS(ldr r3, [r12, 0x50])
AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0
and r3, r3, #(MMFR0_PMSA) @ PMSA field
--
2.20.1
[ Upstream commit f32c2877bcb068a718bb70094cd59ccc29d4d082 ]
There was a missing comparison with 0 when checking if type is "s64" or
"u64". Therefore, the body of the if-statement was entered if "type" was
"u64" or not "s64", which made the first strcmp() redundant since if
type is "u64", it's not "s64".
If type is "s64", the body of the if-statement is not entered but since
the remainder of the function consists of if-statements which will not
be entered if type is "s64", we will just return "val", which is
correct, albeit at the cost of a few more calls to strcmp(), i.e., it
will behave just as if the if-statement was entered.
If type is neither "s64" or "u64", the body of the if-statement will be
entered incorrectly and "val" returned. This means that any type that is
checked after "s64" and "u64" is handled the same way as "s64" and
"u64", i.e., the limiting of "val" to fit in for example "s8" is never
reached.
This was introduced in the kernel tree when the sources were copied from
trace-cmd in commit f7d82350e597 ("tools/events: Add files to create
libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei
("Implement typecasting in parser") when the function was introduced,
i.e., it has always behaved the wrong way.
Detected by cppcheck.
Signed-off-by: Rikard Falkeborn <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/traceevent/event-parse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 10985d991ed29..6ccfd13d5cf9c 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -2192,7 +2192,7 @@ eval_type_str(unsigned long long val, const char *type, int pointer)
return val & 0xffffffff;
if (strcmp(type, "u64") == 0 ||
- strcmp(type, "s64"))
+ strcmp(type, "s64") == 0)
return val;
if (strcmp(type, "s8") == 0)
--
2.20.1
[ Upstream commit 62039b6aef63380ba7a37c113bbaeee8a55c5342 ]
When cancel_delayed_work() returns, the delayed work may still
be running. This means that the core could potentially free
the private structure (struct xadc) while the delayed work
is still using it. This is a potential use-after-free.
Fix by calling cancel_delayed_work_sync(), which waits for
any residual work to finish before returning.
Signed-off-by: Sven Van Asbroeck <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/xilinx-xadc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 3f6be5ac049a8..1960694e80076 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1320,7 +1320,7 @@ static int xadc_remove(struct platform_device *pdev)
}
free_irq(xadc->irq, indio_dev);
clk_disable_unprepare(xadc->clk);
- cancel_delayed_work(&xadc->zynq_unmask_work);
+ cancel_delayed_work_sync(&xadc->zynq_unmask_work);
kfree(xadc->data);
kfree(indio_dev->channels);
--
2.20.1
[ Upstream commit a1e8783db8e0d58891681bc1e6d9ada66eae8e20 ]
Currently it's not possible to use perf on ath79 due to genirq flags
mismatch happening on static virtual IRQ 13 which is used for
performance counters hardware IRQ 5.
On TP-Link Archer C7v5:
CPU0
2: 0 MIPS 2 ath9k
4: 318 MIPS 4 19000000.eth
7: 55034 MIPS 7 timer
8: 1236 MISC 3 ttyS0
12: 0 INTC 1 ehci_hcd:usb1
13: 0 gpio-ath79 2 keys
14: 0 gpio-ath79 5 keys
15: 31 AR724X PCI 1 ath10k_pci
$ perf top
genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys)
On TP-Link Archer C7v4:
CPU0
4: 0 MIPS 4 19000000.eth
5: 7135 MIPS 5 1a000000.eth
7: 98379 MIPS 7 timer
8: 30 MISC 3 ttyS0
12: 90028 INTC 0 ath9k
13: 5520 INTC 1 ehci_hcd:usb1
14: 4623 INTC 2 ehci_hcd:usb2
15: 32844 AR724X PCI 1 ath10k_pci
16: 0 gpio-ath79 16 keys
23: 0 gpio-ath79 23 keys
$ perf top
genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1)
This problem is happening, because currently statically assigned virtual
IRQ 13 for performance counters is not claimed during the initialization
of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that
this interrupt isn't available for further use.
So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU.
Tested-by: Kevin 'ldir' Darbyshire-Bryant <[email protected]>
Signed-off-by: Petr Štetiar <[email protected]>
Acked-by: John Crispin <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Jason Cooper <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/ath79/setup.c | 6 ------
drivers/irqchip/irq-ath79-misc.c | 11 +++++++++++
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 4c7a93f4039a0..7c0b2e6cdfbd7 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -211,12 +211,6 @@ const char *get_system_type(void)
return ath79_sys_type;
}
-int get_c0_perfcount_int(void)
-{
- return ATH79_MISC_IRQ(5);
-}
-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-
unsigned int get_c0_compare_int(void)
{
return CP0_LEGACY_COMPARE_IRQ;
diff --git a/drivers/irqchip/irq-ath79-misc.c b/drivers/irqchip/irq-ath79-misc.c
index aa72907846360..0390603170b40 100644
--- a/drivers/irqchip/irq-ath79-misc.c
+++ b/drivers/irqchip/irq-ath79-misc.c
@@ -22,6 +22,15 @@
#define AR71XX_RESET_REG_MISC_INT_ENABLE 4
#define ATH79_MISC_IRQ_COUNT 32
+#define ATH79_MISC_PERF_IRQ 5
+
+static int ath79_perfcount_irq;
+
+int get_c0_perfcount_int(void)
+{
+ return ath79_perfcount_irq;
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
static void ath79_misc_irq_handler(struct irq_desc *desc)
{
@@ -113,6 +122,8 @@ static void __init ath79_misc_intc_domain_init(
{
void __iomem *base = domain->host_data;
+ ath79_perfcount_irq = irq_create_mapping(domain, ATH79_MISC_PERF_IRQ);
+
/* Disable and clear all interrupts */
__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
--
2.20.1
From: Hans de Goede <[email protected]>
commit cf4f2ad6b87dda2dbe0573b1ebeb0273f8d4aac6 upstream.
Userspace can make host function calls, called hgcm-calls through the
/dev/vboxguest device.
In this case we should not accept all hgcm-function-parameter-types, some
are only valid for in kernel calls.
This commit adds proper hgcm-function-parameter-type validation to the
ioctl for doing a hgcm-call from userspace.
Cc: [email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/virt/vboxguest/vboxguest_core.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
--- a/drivers/virt/vboxguest/vboxguest_core.c
+++ b/drivers/virt/vboxguest/vboxguest_core.c
@@ -1263,6 +1263,20 @@ static int vbg_ioctl_hgcm_disconnect(str
return ret;
}
+static bool vbg_param_valid(enum vmmdev_hgcm_function_parameter_type type)
+{
+ switch (type) {
+ case VMMDEV_HGCM_PARM_TYPE_32BIT:
+ case VMMDEV_HGCM_PARM_TYPE_64BIT:
+ case VMMDEV_HGCM_PARM_TYPE_LINADDR:
+ case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN:
+ case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT:
+ return true;
+ default:
+ return false;
+ }
+}
+
static int vbg_ioctl_hgcm_call(struct vbg_dev *gdev,
struct vbg_session *session, bool f32bit,
struct vbg_ioctl_hgcm_call *call)
@@ -1298,6 +1312,23 @@ static int vbg_ioctl_hgcm_call(struct vb
}
call->hdr.size_out = actual_size;
+ /* Validate parameter types */
+ if (f32bit) {
+ struct vmmdev_hgcm_function_parameter32 *parm =
+ VBG_IOCTL_HGCM_CALL_PARMS32(call);
+
+ for (i = 0; i < call->parm_count; i++)
+ if (!vbg_param_valid(parm[i].type))
+ return -EINVAL;
+ } else {
+ struct vmmdev_hgcm_function_parameter *parm =
+ VBG_IOCTL_HGCM_CALL_PARMS(call);
+
+ for (i = 0; i < call->parm_count; i++)
+ if (!vbg_param_valid(parm[i].type))
+ return -EINVAL;
+ }
+
/*
* Validate the client id.
*/
[ Upstream commit d4fad0a426c6e26f48c9a7cdd21a7fe9c198d645 ]
Initialize the flow input colorspaces to unknown and reset to that value
when the channel gets disabled. This avoids the state getting mixed up
with a previous mode.
Also keep the CSC settings for the background flow intact when disabling
the foreground flow.
Root-caused-by: Jonathan Marek <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/ipu-v3/ipu-dp.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-dp.c b/drivers/gpu/ipu-v3/ipu-dp.c
index 9b2b3fa479c46..5e44ff1f20851 100644
--- a/drivers/gpu/ipu-v3/ipu-dp.c
+++ b/drivers/gpu/ipu-v3/ipu-dp.c
@@ -195,7 +195,8 @@ int ipu_dp_setup_channel(struct ipu_dp *dp,
ipu_dp_csc_init(flow, flow->foreground.in_cs, flow->out_cs,
DP_COM_CONF_CSC_DEF_BOTH);
} else {
- if (flow->foreground.in_cs == flow->out_cs)
+ if (flow->foreground.in_cs == IPUV3_COLORSPACE_UNKNOWN ||
+ flow->foreground.in_cs == flow->out_cs)
/*
* foreground identical to output, apply color
* conversion on background
@@ -261,6 +262,8 @@ void ipu_dp_disable_channel(struct ipu_dp *dp, bool sync)
struct ipu_dp_priv *priv = flow->priv;
u32 reg, csc;
+ dp->in_cs = IPUV3_COLORSPACE_UNKNOWN;
+
if (!dp->foreground)
return;
@@ -268,8 +271,9 @@ void ipu_dp_disable_channel(struct ipu_dp *dp, bool sync)
reg = readl(flow->base + DP_COM_CONF);
csc = reg & DP_COM_CONF_CSC_DEF_MASK;
- if (csc == DP_COM_CONF_CSC_DEF_FG)
- reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+ reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+ if (csc == DP_COM_CONF_CSC_DEF_BOTH || csc == DP_COM_CONF_CSC_DEF_BG)
+ reg |= DP_COM_CONF_CSC_DEF_BG;
reg &= ~DP_COM_CONF_FG_EN;
writel(reg, flow->base + DP_COM_CONF);
@@ -347,6 +351,8 @@ int ipu_dp_init(struct ipu_soc *ipu, struct device *dev, unsigned long base)
mutex_init(&priv->mutex);
for (i = 0; i < IPUV3_NUM_FLOWS; i++) {
+ priv->flow[i].background.in_cs = IPUV3_COLORSPACE_UNKNOWN;
+ priv->flow[i].foreground.in_cs = IPUV3_COLORSPACE_UNKNOWN;
priv->flow[i].foreground.foreground = true;
priv->flow[i].base = priv->base + ipu_dp_flow_base[i];
priv->flow[i].priv = priv;
--
2.20.1
[ Upstream commit 30c04d796b693e22405c38e9b78e9a364e4c77e6 ]
The run_netsocktests will be marked as passed regardless the actual test
result from the ./socket:
selftests: net: run_netsocktests
========================================
--------------------
running socket test
--------------------
[FAIL]
ok 1..6 selftests: net: run_netsocktests [PASS]
This is because the test script itself has been successfully executed.
Fix this by exit 1 when the test failed.
Signed-off-by: Po-Hsu Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/run_netsocktests | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests
index b093f39c298c3..14e41faf2c574 100755
--- a/tools/testing/selftests/net/run_netsocktests
+++ b/tools/testing/selftests/net/run_netsocktests
@@ -7,7 +7,7 @@ echo "--------------------"
./socket
if [ $? -ne 0 ]; then
echo "[FAIL]"
+ exit 1
else
echo "[PASS]"
fi
-
--
2.20.1
[ Upstream commit 0082517fa4bce073e7cf542633439f26538a14cc ]
Upon reboot, the Acer TravelMate X514-51T laptop appears to complete the
shutdown process, but then it hangs in BIOS POST with a black screen.
The problem is intermittent - at some points it has appeared related to
Secure Boot settings or different kernel builds, but ultimately we have
not been able to identify the exact conditions that trigger the issue to
come and go.
Besides, the EFI mode cannot be disabled in the BIOS of this model.
However, after extensive testing, we observe that using the EFI reboot
method reliably avoids the issue in all cases.
So add a boot time quirk to use EFI reboot on such systems.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=203119
Signed-off-by: Jian-Hong Pan <[email protected]>
Signed-off-by: Daniel Drake <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
[ Fix !CONFIG_EFI build failure, clarify the code and the changelog a bit. ]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/reboot.c | 21 +++++++++++++++++++++
include/linux/efi.h | 7 ++++++-
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 725624b6c0c05..8fd3cedd9accd 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -81,6 +81,19 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
return 0;
}
+/*
+ * Some machines don't handle the default ACPI reboot method and
+ * require the EFI reboot method:
+ */
+static int __init set_efi_reboot(const struct dmi_system_id *d)
+{
+ if (reboot_type != BOOT_EFI && !efi_runtime_disabled()) {
+ reboot_type = BOOT_EFI;
+ pr_info("%s series board detected. Selecting EFI-method for reboot.\n", d->ident);
+ }
+ return 0;
+}
+
void __noreturn machine_real_restart(unsigned int type)
{
local_irq_disable();
@@ -166,6 +179,14 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
},
},
+ { /* Handle reboot issue on Acer TravelMate X514-51T */
+ .callback = set_efi_reboot,
+ .ident = "Acer TravelMate X514-51T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate X514-51T"),
+ },
+ },
/* Apple */
{ /* Handle problems with rebooting on Apple MacBook5 */
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 401e4b254e30b..cc3391796c0b8 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -1564,7 +1564,12 @@ efi_status_t efi_setup_gop(efi_system_table_t *sys_table_arg,
struct screen_info *si, efi_guid_t *proto,
unsigned long size);
-bool efi_runtime_disabled(void);
+#ifdef CONFIG_EFI
+extern bool efi_runtime_disabled(void);
+#else
+static inline bool efi_runtime_disabled(void) { return true; }
+#endif
+
extern void efi_call_virt_check_flags(unsigned long flags, const char *call);
enum efi_secureboot_mode {
--
2.20.1
[ Upstream commit 1dc2b3d65523780ed1972d446c76e62e13f3e8f5 ]
The err2 error return path calls qede_ptp_disable that cleans up
on an error and frees ptp. After this, the free'd ptp is dereferenced
when ptp->clock is set to NULL and the code falls-through to error
path err1 that frees ptp again.
Fix this by calling qede_ptp_disable and exiting via an error
return path that does not set ptp->clock or kfree ptp.
Addresses-Coverity: ("Write to pointer after free")
Fixes: 035744975aec ("qede: Add support for PTP resource locking.")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qede/qede_ptp.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_ptp.c b/drivers/net/ethernet/qlogic/qede/qede_ptp.c
index 013ff567283c7..5e574c3b625e5 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ptp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.c
@@ -490,18 +490,17 @@ int qede_ptp_enable(struct qede_dev *edev, bool init_tc)
ptp->clock = ptp_clock_register(&ptp->clock_info, &edev->pdev->dev);
if (IS_ERR(ptp->clock)) {
- rc = -EINVAL;
DP_ERR(edev, "PTP clock registration failed\n");
+ qede_ptp_disable(edev);
+ rc = -EINVAL;
goto err2;
}
return 0;
-err2:
- qede_ptp_disable(edev);
- ptp->clock = NULL;
err1:
kfree(ptp);
+err2:
edev->ptp = NULL;
return rc;
--
2.20.1
[ Upstream commit 6a03469a1edc94da52b65478f1e00837add869a3 ]
With CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y, we compile the kernel with
-fdata-sections, which also splits the .bss section.
The new section, with a new .bss.* name, which pattern gets missed by the
main x86 linker script which only expects the '.bss' name. This results
in the discarding of the second part and a too small, truncated .bss
section and an unhappy, non-working kernel.
Use the common BSS_MAIN macro in the linker script to properly capture
and merge all the generated BSS sections.
Signed-off-by: Sami Tolvanen <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Extended the changelog. ]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/vmlinux.lds.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index c63bab98780cf..85e6d5620188e 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -372,7 +372,7 @@ SECTIONS
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__bss_start = .;
*(.bss..page_aligned)
- *(.bss)
+ *(BSS_MAIN)
BSS_DECRYPTED
. = ALIGN(PAGE_SIZE);
__bss_stop = .;
--
2.20.1
[ Upstream commit 33d1c018179d0a30c39cc5f1682b77867282694b ]
I believe that "hook->num" can be up to UINT_MAX. Shifting more than
31 bits would is undefined in C but in practice it would lead to shift
wrapping. That would lead to an array overflow in nf_tables_addchain():
ops->hook = hook.type->hooks[ops->hooknum];
Fixes: fe19c04ca137 ("netfilter: nf_tables: remove nhooks field from struct nft_af_info")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_tables_api.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 1af54119bafc7..f272f9538c44a 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -1496,7 +1496,7 @@ static int nft_chain_parse_hook(struct net *net,
if (IS_ERR(type))
return PTR_ERR(type);
}
- if (!(type->hook_mask & (1 << hook->num)))
+ if (hook->num > NF_MAX_HOOKS || !(type->hook_mask & (1 << hook->num)))
return -EOPNOTSUPP;
if (type->type == NFT_CHAIN_T_NAT &&
--
2.20.1
[ Upstream commit fbc87aa0f7c429999dc31f1bac3b2615008cac32 ]
The OX820 compatible is wrong is the driver, fix it.
Fixes: 2ea3401e2a84 ("clocksource/drivers/oxnas: Add OX820 compatible")
Reported-by: Daniel Golle <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/timer-oxnas-rps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clocksource/timer-oxnas-rps.c b/drivers/clocksource/timer-oxnas-rps.c
index eed6feff8b5f2..30c6f4ce672b3 100644
--- a/drivers/clocksource/timer-oxnas-rps.c
+++ b/drivers/clocksource/timer-oxnas-rps.c
@@ -296,4 +296,4 @@ static int __init oxnas_rps_timer_init(struct device_node *np)
TIMER_OF_DECLARE(ox810se_rps,
"oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);
TIMER_OF_DECLARE(ox820_rps,
- "oxsemi,ox820se-rps-timer", oxnas_rps_timer_init);
+ "oxsemi,ox820-rps-timer", oxnas_rps_timer_init);
--
2.20.1
[ Upstream commit 1d487e9bf8ba66a7174c56a0029c54b1eca8f99c ]
These were found with smatch, and then generalized when applicable.
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/lapic.c | 4 +++-
include/linux/kvm_host.h | 10 ++++++----
virt/kvm/irqchip.c | 5 +++--
virt/kvm/kvm_main.c | 6 ++++--
4 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 3692de84c4201..d2f5aa220355f 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -133,6 +133,7 @@ static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
if (offset <= max_apic_id) {
u8 cluster_size = min(max_apic_id - offset + 1, 16U);
+ offset = array_index_nospec(offset, map->max_apic_id + 1);
*cluster = &map->phys_map[offset];
*mask = dest_id & (0xffff >> (16 - cluster_size));
} else {
@@ -896,7 +897,8 @@ static inline bool kvm_apic_map_get_dest_lapic(struct kvm *kvm,
if (irq->dest_id > map->max_apic_id) {
*bitmap = 0;
} else {
- *dst = &map->phys_map[irq->dest_id];
+ u32 dest_id = array_index_nospec(irq->dest_id, map->max_apic_id + 1);
+ *dst = &map->phys_map[dest_id];
*bitmap = 1;
}
return true;
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 23c242a7ac524..30efb36638923 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -28,6 +28,7 @@
#include <linux/irqbypass.h>
#include <linux/swait.h>
#include <linux/refcount.h>
+#include <linux/nospec.h>
#include <asm/signal.h>
#include <linux/kvm.h>
@@ -491,10 +492,10 @@ static inline struct kvm_io_bus *kvm_get_bus(struct kvm *kvm, enum kvm_bus idx)
static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i)
{
- /* Pairs with smp_wmb() in kvm_vm_ioctl_create_vcpu, in case
- * the caller has read kvm->online_vcpus before (as is the case
- * for kvm_for_each_vcpu, for example).
- */
+ int num_vcpus = atomic_read(&kvm->online_vcpus);
+ i = array_index_nospec(i, num_vcpus);
+
+ /* Pairs with smp_wmb() in kvm_vm_ioctl_create_vcpu. */
smp_rmb();
return kvm->vcpus[i];
}
@@ -578,6 +579,7 @@ void kvm_put_kvm(struct kvm *kvm);
static inline struct kvm_memslots *__kvm_memslots(struct kvm *kvm, int as_id)
{
+ as_id = array_index_nospec(as_id, KVM_ADDRESS_SPACE_NUM);
return srcu_dereference_check(kvm->memslots[as_id], &kvm->srcu,
lockdep_is_held(&kvm->slots_lock) ||
!refcount_read(&kvm->users_count));
diff --git a/virt/kvm/irqchip.c b/virt/kvm/irqchip.c
index b1286c4e07122..0bd0683640bdf 100644
--- a/virt/kvm/irqchip.c
+++ b/virt/kvm/irqchip.c
@@ -144,18 +144,19 @@ static int setup_routing_entry(struct kvm *kvm,
{
struct kvm_kernel_irq_routing_entry *ei;
int r;
+ u32 gsi = array_index_nospec(ue->gsi, KVM_MAX_IRQ_ROUTES);
/*
* Do not allow GSI to be mapped to the same irqchip more than once.
* Allow only one to one mapping between GSI and non-irqchip routing.
*/
- hlist_for_each_entry(ei, &rt->map[ue->gsi], link)
+ hlist_for_each_entry(ei, &rt->map[gsi], link)
if (ei->type != KVM_IRQ_ROUTING_IRQCHIP ||
ue->type != KVM_IRQ_ROUTING_IRQCHIP ||
ue->u.irqchip.irqchip == ei->irqchip.irqchip)
return -EINVAL;
- e->gsi = ue->gsi;
+ e->gsi = gsi;
e->type = ue->type;
r = kvm_set_routing_entry(kvm, e, ue);
if (r)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 6a79df88b5469..e909d9907b506 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2887,12 +2887,14 @@ static int kvm_ioctl_create_device(struct kvm *kvm,
struct kvm_device_ops *ops = NULL;
struct kvm_device *dev;
bool test = cd->flags & KVM_CREATE_DEVICE_TEST;
+ int type;
int ret;
if (cd->type >= ARRAY_SIZE(kvm_device_ops_table))
return -ENODEV;
- ops = kvm_device_ops_table[cd->type];
+ type = array_index_nospec(cd->type, ARRAY_SIZE(kvm_device_ops_table));
+ ops = kvm_device_ops_table[type];
if (ops == NULL)
return -ENODEV;
@@ -2907,7 +2909,7 @@ static int kvm_ioctl_create_device(struct kvm *kvm,
dev->kvm = kvm;
mutex_lock(&kvm->lock);
- ret = ops->create(dev, cd->type);
+ ret = ops->create(dev, type);
if (ret < 0) {
mutex_unlock(&kvm->lock);
kfree(dev);
--
2.20.1
From: Stefan Wahren <[email protected]>
commit 53f1647da3e8fb3e89066798f0fdc045064d353d upstream.
In case pwm_fan_of_get_cooling_data() fails we should disable the PWM
just like in the other error cases.
Fixes: 2e5219c77183 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree")
Cc: <[email protected]> # 4.14+
Reported-by: Guenter Rock <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/pwm-fan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -250,7 +250,7 @@ static int pwm_fan_probe(struct platform
ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx);
if (ret)
- return ret;
+ goto err_pwm_disable;
ctx->pwm_fan_state = ctx->pwm_fan_max_state;
if (IS_ENABLED(CONFIG_THERMAL)) {
[ Upstream commit 486fa92df4707b5df58d6508728bdb9321a59766 ]
In case kmemdup fails, the fix releases resources and returns to
avoid the NULL pointer dereference.
Signed-off-by: Aditya Pakki <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/btt_devs.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/nvdimm/btt_devs.c b/drivers/nvdimm/btt_devs.c
index 795ad4ff35caf..e341498876cad 100644
--- a/drivers/nvdimm/btt_devs.c
+++ b/drivers/nvdimm/btt_devs.c
@@ -190,14 +190,15 @@ static struct device *__nd_btt_create(struct nd_region *nd_region,
return NULL;
nd_btt->id = ida_simple_get(&nd_region->btt_ida, 0, 0, GFP_KERNEL);
- if (nd_btt->id < 0) {
- kfree(nd_btt);
- return NULL;
- }
+ if (nd_btt->id < 0)
+ goto out_nd_btt;
nd_btt->lbasize = lbasize;
- if (uuid)
+ if (uuid) {
uuid = kmemdup(uuid, 16, GFP_KERNEL);
+ if (!uuid)
+ goto out_put_id;
+ }
nd_btt->uuid = uuid;
dev = &nd_btt->dev;
dev_set_name(dev, "btt%d.%d", nd_region->id, nd_btt->id);
@@ -212,6 +213,13 @@ static struct device *__nd_btt_create(struct nd_region *nd_region,
return NULL;
}
return dev;
+
+out_put_id:
+ ida_simple_remove(&nd_region->btt_ida, nd_btt->id);
+
+out_nd_btt:
+ kfree(nd_btt);
+ return NULL;
}
struct device *nd_btt_create(struct nd_region *nd_region)
--
2.20.1
[ Upstream commit c01908a14bf735b871170092807c618bb9dae654 ]
According to HUT 1.12 usage 0xb5 from the generic desktop page is reserved
for switching between external and internal display, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-input.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 55e6f18ff627d..d988b92b20c82 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -677,6 +677,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
break;
}
+ if ((usage->hid & 0xf0) == 0xb0) { /* SC - Display */
+ switch (usage->hid & 0xf) {
+ case 0x05: map_key_clear(KEY_SWITCHVIDEOMODE); break;
+ default: goto ignore;
+ }
+ break;
+ }
+
/*
* Some lazy vendors declare 255 usages for System Control,
* leading to the creation of ABS_X|Y axis and too many others.
--
2.20.1
[ Upstream commit 21bd68f196ca91fc0f3d9bd1b32f6e530e8c1c88 ]
__pagevec_release() complains loudly if any page in the vector is still
locked. The pages need to be locked for generic_error_remove_page(), but
that function doesn't actually unlock them.
Unlock the pages afterwards.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: Jonathan Billings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/write.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 19c04caf3c012..e00461a6de9aa 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -253,6 +253,7 @@ static void afs_kill_pages(struct address_space *mapping,
first = page->index + 1;
lock_page(page);
generic_error_remove_page(mapping, page);
+ unlock_page(page);
}
__pagevec_release(&pv);
--
2.20.1
From: Jiaxun Yang <[email protected]>
commit f7db839fccf087664e5587966220821289b6a9cb upstream.
Some AMD based ThinkPads have a firmware bug that calling
"GBDC" will cause Bluetooth on Intel wireless cards blocked.
Probe these models by DMI match and disable Bluetooth subdriver
if specified Intel wireless card exist.
Cc: stable <[email protected]> # 4.14+
Signed-off-by: Jiaxun Yang <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/thinkpad_acpi.c | 72 ++++++++++++++++++++++++++++++++++-
1 file changed, 70 insertions(+), 2 deletions(-)
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -79,7 +79,7 @@
#include <linux/jiffies.h>
#include <linux/workqueue.h>
#include <linux/acpi.h>
-#include <linux/pci_ids.h>
+#include <linux/pci.h>
#include <linux/power_supply.h>
#include <linux/thinkpad_acpi.h>
#include <sound/core.h>
@@ -4496,6 +4496,74 @@ static void bluetooth_exit(void)
bluetooth_shutdown();
}
+static const struct dmi_system_id bt_fwbug_list[] __initconst = {
+ {
+ .ident = "ThinkPad E485",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_BOARD_NAME, "20KU"),
+ },
+ },
+ {
+ .ident = "ThinkPad E585",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_BOARD_NAME, "20KV"),
+ },
+ },
+ {
+ .ident = "ThinkPad A285 - 20MW",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_BOARD_NAME, "20MW"),
+ },
+ },
+ {
+ .ident = "ThinkPad A285 - 20MX",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_BOARD_NAME, "20MX"),
+ },
+ },
+ {
+ .ident = "ThinkPad A485 - 20MU",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_BOARD_NAME, "20MU"),
+ },
+ },
+ {
+ .ident = "ThinkPad A485 - 20MV",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_BOARD_NAME, "20MV"),
+ },
+ },
+ {}
+};
+
+static const struct pci_device_id fwbug_cards_ids[] __initconst = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24F3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24FD) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2526) },
+ {}
+};
+
+
+static int __init have_bt_fwbug(void)
+{
+ /*
+ * Some AMD based ThinkPads have a firmware bug that calling
+ * "GBDC" will cause bluetooth on Intel wireless cards blocked
+ */
+ if (dmi_check_system(bt_fwbug_list) && pci_dev_present(fwbug_cards_ids)) {
+ vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,
+ FW_BUG "disable bluetooth subdriver for Intel cards\n");
+ return 1;
+ } else
+ return 0;
+}
+
static int __init bluetooth_init(struct ibm_init_struct *iibm)
{
int res;
@@ -4508,7 +4576,7 @@ static int __init bluetooth_init(struct
/* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
- tp_features.bluetooth = hkey_handle &&
+ tp_features.bluetooth = !have_bt_fwbug() && hkey_handle &&
acpi_evalf(hkey_handle, &status, "GBDC", "qd");
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,
[ Upstream commit 0a2c34f18c94b596562bf3d019fceab998b8b584 ]
Currently if a pci dma mapping failure is detected a free'd
memblock address is returned rather than a NULL (that indicates
an error). Fix this by ensuring NULL is returned on this error case.
Addresses-Coverity: ("Use after free")
Fixes: 528f727279ae ("vxge: code cleanup and reorganization")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/neterion/vxge/vxge-config.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.c b/drivers/net/ethernet/neterion/vxge/vxge-config.c
index bf4302e45dcd9..28f7656647027 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-config.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-config.c
@@ -2365,6 +2365,7 @@ static void *__vxge_hw_blockpool_malloc(struct __vxge_hw_device *devh, u32 size,
dma_object->addr))) {
vxge_os_dma_free(devh->pdev, memblock,
&dma_object->acc_handle);
+ memblock = NULL;
goto exit;
}
--
2.20.1
[ Upstream commit 96dd86871e1fffbc39e4fa61c9c75ec54ee9af0f ]
According to HUTRR77 usage 0x29f from the consumer page is reserved for
the Desktop application to present all running user’s application windows.
Linux defines KEY_SCALE to request Compiz Scale (Expose) mode, so let's
add the mapping.
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-input.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index e649940e065da..a9892cabe7cd8 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1026,6 +1026,8 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x2cb: map_key_clear(KEY_KBDINPUTASSIST_ACCEPT); break;
case 0x2cc: map_key_clear(KEY_KBDINPUTASSIST_CANCEL); break;
+ case 0x29f: map_key_clear(KEY_SCALE); break;
+
default: map_key_clear(KEY_UNKNOWN);
}
break;
--
2.20.1
[ Upstream commit 99834eead2a04e93a120abb112542b87c42ff5e1 ]
When this is disabled, we get a link failure:
drivers/clocksource/timer-npcm7xx.o: In function `npcm7xx_timer_init':
timer-npcm7xx.c:(.init.text+0xf): undefined reference to `timer_of_init'
Fixes: 1c00289ecd12 ("clocksource/drivers/npcm: Add NPCM7xx timer driver")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c1ddafa4c2994..4d37f018d846c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -136,6 +136,7 @@ config VT8500_TIMER
config NPCM7XX_TIMER
bool "NPCM7xx timer driver" if COMPILE_TEST
depends on HAS_IOMEM
+ select TIMER_OF
select CLKSRC_MMIO
help
Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture,
--
2.20.1
[ Upstream commit 9dc6488e84b0f64df17672271664752488cd6a25 ]
If offset is not zero and length is bigger than PAGE_SIZE,
this will cause to out of boundary access to a page memory
Fixes: 98cc093cba1e ("block, THP: make block_device_operations.rw_page support THP")
Co-developed-by: Liang ZhiCheng <[email protected]>
Signed-off-by: Liang ZhiCheng <[email protected]>
Signed-off-by: Li RongQing <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/pmem.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index 1d432c5ed2753..cff027fc26761 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -113,13 +113,13 @@ static void write_pmem(void *pmem_addr, struct page *page,
while (len) {
mem = kmap_atomic(page);
- chunk = min_t(unsigned int, len, PAGE_SIZE);
+ chunk = min_t(unsigned int, len, PAGE_SIZE - off);
memcpy_flushcache(pmem_addr, mem + off, chunk);
kunmap_atomic(mem);
len -= chunk;
off = 0;
page++;
- pmem_addr += PAGE_SIZE;
+ pmem_addr += chunk;
}
}
@@ -132,7 +132,7 @@ static blk_status_t read_pmem(struct page *page, unsigned int off,
while (len) {
mem = kmap_atomic(page);
- chunk = min_t(unsigned int, len, PAGE_SIZE);
+ chunk = min_t(unsigned int, len, PAGE_SIZE - off);
rem = memcpy_mcsafe(mem + off, pmem_addr, chunk);
kunmap_atomic(mem);
if (rem)
@@ -140,7 +140,7 @@ static blk_status_t read_pmem(struct page *page, unsigned int off,
len -= chunk;
off = 0;
page++;
- pmem_addr += PAGE_SIZE;
+ pmem_addr += chunk;
}
return BLK_STS_OK;
}
--
2.20.1
[ Upstream commit eb9b64e3a9f8483e6e54f4e03b2ae14ae5db2690 ]
skb->truesize can change due to memory reallocation or when adding extra
fragments. Adjust fq->memory_usage accordingly
Signed-off-by: Felix Fietkau <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/tx.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 743cde66aaf62..2f726cde9998b 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3185,6 +3185,7 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
u8 max_subframes = sta->sta.max_amsdu_subframes;
int max_frags = local->hw.max_tx_fragments;
int max_amsdu_len = sta->sta.max_amsdu_len;
+ int orig_truesize;
__be16 len;
void *data;
bool ret = false;
@@ -3218,6 +3219,7 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
if (!head)
goto out;
+ orig_truesize = head->truesize;
orig_len = head->len;
if (skb->len + head->len > max_amsdu_len)
@@ -3272,6 +3274,7 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
*frag_tail = skb;
out_recalc:
+ fq->memory_usage += head->truesize - orig_truesize;
if (head->len != orig_len) {
flow->backlog += head->len - orig_len;
tin->backlog_bytes += head->len - orig_len;
--
2.20.1
stable-rc/linux-4.19.y boot: 131 boots: 0 failed, 129 passed with 1 offline, 1 conflict (v4.19.43-114-gb5001f5eab58)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.43-114-gb5001f5eab58/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.43-114-gb5001f5eab58/
Tree: stable-rc
Branch: linux-4.19.y
Git Describe: v4.19.43-114-gb5001f5eab58
Git Commit: b5001f5eab58fc1a2a3d5dfc90fa9bb513c73d8a
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 68 unique boards, 23 SoC families, 14 builds out of 206
Boot Regressions Detected:
arm:
multi_v7_defconfig:
gcc-8:
omap4-panda:
lab-baylibre: failing since 1 day (last pass: v4.19.43 - first fail: v4.19.43-87-gc209b8bd5e5e)
Offline Platforms:
arm:
multi_v7_defconfig:
gcc-8
stih410-b2120: 1 offline lab
Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
arm:
multi_v7_defconfig:
omap4-panda:
lab-baylibre: FAIL (gcc-8)
lab-baylibre-seattle: PASS (gcc-8)
---
For more info write to <[email protected]>
On 5/15/19 3:54 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.44 release.
> There are 113 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 17 May 2019 09:04:35 AM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 349 pass: 349 fail: 0
Guenter
On Wed, 15 May 2019 at 16:53, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.19.44 release.
> There are 113 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 17 May 2019 09:04:35 AM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.44-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.19.44-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: b5001f5eab58fc1a2a3d5dfc90fa9bb513c73d8a
git describe: v4.19.43-114-gb5001f5eab58
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.43-114-gb5001f5eab58
No regressions (compared to build v4.19.43)
No fixes (compared to build v4.19.43)
Ran 23449 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* libgpiod
* libhugetlbfs
* kselftest
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 15/05/2019 11:54, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.44 release.
> There are 113 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 17 May 2019 09:04:35 AM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.44-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.19:
12 builds: 12 pass, 0 fail
22 boots: 22 pass, 0 fail
32 tests: 32 pass, 0 fail
Linux version: 4.19.44-rc1-gb5001f5
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On 5/15/19 4:54 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.44 release.
> There are 113 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 17 May 2019 09:04:35 AM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.44-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Wed 2019-05-15 12:55:33, Greg Kroah-Hartman wrote:
> [ Upstream commit a8fd48b50deaa20808bbf0f6685f6f1acba6a64c ]
>
> Preemption disabled at:
> [<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38
> Call trace:
> [<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0
> [<ffff00000808a9a4>] show_stack+0x14/0x20
> [<ffff000008e6c0c0>] dump_stack+0xac/0xe4
> [<ffff0000080fe76c>] ___might_sleep+0x164/0x238
> [<ffff0000080fe890>] __might_sleep+0x50/0x88
> [<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0
> [<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188 [mscc_ocelot_common]
> [<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0
> [<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38
>
> Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Is it right fix? Warning is gone, but now allocation is more likely to
fail, causing mc_add() to fail under memory pressure.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>-----Original Message-----
>From: Pavel Machek <[email protected]>
>Sent: Friday, May 17, 2019 11:17 AM
>To: Greg Kroah-Hartman <[email protected]>
>Cc: [email protected]; [email protected]; Claudiu Manoil
><[email protected]>; David S. Miller <[email protected]>; Sasha
>Levin <[email protected]>
>Subject: Re: [PATCH 4.19 042/113] ocelot: Dont sleep in atomic context
>(irqs_disabled())
>
>On Wed 2019-05-15 12:55:33, Greg Kroah-Hartman wrote:
>> [ Upstream commit a8fd48b50deaa20808bbf0f6685f6f1acba6a64c ]
>>
>> Preemption disabled at:
>> [<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38
>> Call trace:
>> [<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0
>> [<ffff00000808a9a4>] show_stack+0x14/0x20
>> [<ffff000008e6c0c0>] dump_stack+0xac/0xe4
>> [<ffff0000080fe76c>] ___might_sleep+0x164/0x238
>> [<ffff0000080fe890>] __might_sleep+0x50/0x88
>> [<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0
>> [<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188
>[mscc_ocelot_common]
>> [<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0
>> [<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38
>>
>> Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
>
>Is it right fix? Warning is gone, but now allocation is more likely to
>fail, causing mc_add() to fail under memory pressure.
>
So far this contributes to fixing a kernel hang issue, seen occasionally
when the switch interfaces were brought up.
Other than that I would look into improving this code.
It looks suboptimal at least. Do we really need to allocate whole
struct netdev_hw_addr elements? Can the allocation size be reduced?
What about pre-allocating enough room for ha elements outside the
atomic context (set_rx_mode() in this case)?
Thanks,
Claudiu
Hi!
> >On Wed 2019-05-15 12:55:33, Greg Kroah-Hartman wrote:
> >> [ Upstream commit a8fd48b50deaa20808bbf0f6685f6f1acba6a64c ]
> >>
> >> Preemption disabled at:
> >> [<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38
> >> Call trace:
> >> [<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0
> >> [<ffff00000808a9a4>] show_stack+0x14/0x20
> >> [<ffff000008e6c0c0>] dump_stack+0xac/0xe4
> >> [<ffff0000080fe76c>] ___might_sleep+0x164/0x238
> >> [<ffff0000080fe890>] __might_sleep+0x50/0x88
> >> [<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0
> >> [<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188
> >[mscc_ocelot_common]
> >> [<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0
> >> [<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38
> >>
> >> Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
> >
> >Is it right fix? Warning is gone, but now allocation is more likely to
> >fail, causing mc_add() to fail under memory pressure.
> >
>
> So far this contributes to fixing a kernel hang issue, seen occasionally
> when the switch interfaces were brought up.
> Other than that I would look into improving this code.
> It looks suboptimal at least. Do we really need to allocate whole
> struct netdev_hw_addr elements? Can the allocation size be reduced?
> What about pre-allocating enough room for ha elements outside the
> atomic context (set_rx_mode() in this case)?
Pre-allocating the elements sounds like a obvious solution, yes.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany