This is the start of the stable review cycle for the 4.19.3 release.
There are 205 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed Nov 21 16:24:55 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.3-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.3-rc1
Stefano Stabellini <[email protected]>
CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM
Ville Syrjälä <[email protected]>
drm/i915: Fix hpd handling for pins with two encoders
Lyude Paul <[email protected]>
drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST
Lyude Paul <[email protected]>
drm/i915: Fix possible race in intel_dp_add_mst_connector()
Chris Wilson <[email protected]>
drm/i915/execlists: Force write serialisation into context image vs execution
Chris Wilson <[email protected]>
drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5
Chris Wilson <[email protected]>
drm/i915: Mark pin flags as u64
Ville Syrjälä <[email protected]>
drm/i915: Don't oops during modeset shutdown after lpe audio deinit
Chris Wilson <[email protected]>
drm/i915: Compare user's 64b GTT offset even on 32b
Ville Syrjälä <[email protected]>
drm/i915: Fix ilk+ watermarks when disabling pipes
Ville Syrjälä <[email protected]>
drm/i915: Fix error handling for the NV12 fb dimensions check
Chris Wilson <[email protected]>
drm/i915: Mark up GTT sizes as u64
Clint Taylor <[email protected]>
drm/i915/hdmi: Add HDMI 2.0 audio clock recovery N values
Manasi Navare <[email protected]>
drm/i915/icl: Fix the macros for DFLEXDPMLE register bits
Dhinakaran Pandiyan <[email protected]>
drm/i915/dp: Restrict link retrain workaround to external monitors
Dhinakaran Pandiyan <[email protected]>
drm/i915/dp: Fix link retraining comment in intel_dp_long_pulse()
Chris Wilson <[email protected]>
drm/i915: Large page offsets for pread/pwrite
Lyude Paul <[email protected]>
drm/i915: Skip vcpi allocation for MSTB ports that are gone
Lyude Paul <[email protected]>
drm/i915: Don't unset intel_connector->mst_port
Ville Syrjälä <[email protected]>
drm/i915: Restore vblank interrupts earlier
Ville Syrjälä <[email protected]>
drm/i915: Use the correct crtc when sanitizing plane mapping
Manasi Navare <[email protected]>
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
Hans de Goede <[email protected]>
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
Lyude Paul <[email protected]>
drm/atomic_helper: Disallow new modesets on unregistered connectors
Stanislav Lisovskiy <[email protected]>
drm/dp_mst: Check if primary mstb is null
Lucas Stach <[email protected]>
drm/etnaviv: fix bogus fence complete check in timeout handler
Akshu Agrawal <[email protected]>
drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD
Lyude Paul <[email protected]>
drm/nouveau: Fix nv50_mstc->best_encoder()
Lyude Paul <[email protected]>
drm/nouveau: Check backlight IDs are >= 0, not > 0
Lyude Paul <[email protected]>
drm/amdgpu: Suppress keypresses from ACPI_VIDEO events
Alex Deucher <[email protected]>
drm/amdgpu: add missing CHIP_HAINAN in amdgpu_ucode_get_load_type
Rex Zhu <[email protected]>
drm/amdgpu: Fix typo in amdgpu_vmid_mgr_init
Marc Zyngier <[email protected]>
drm/rockchip: Allow driver to be shutdown on reboot/kexec
Uwe Kleine-König <[email protected]>
scripts/spdxcheck.py: make python3 compliant
Roman Gushchin <[email protected]>
mm: don't reclaim inodes with many attached pages
Ard Biesheuvel <[email protected]>
efi/arm/libstub: Pack FDT after populating it
Vasily Averin <[email protected]>
mm/swapfile.c: use kvzalloc for swap_info_struct allocation
Mike Kravetz <[email protected]>
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
Arnd Bergmann <[email protected]>
lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
Eric Biggers <[email protected]>
crypto: user - fix leaking uninitialized memory to userspace
Diego Viola <[email protected]>
libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD
Andreas Gruenbacher <[email protected]>
gfs2: Fix metadata read-ahead during truncate (2)
Andreas Gruenbacher <[email protected]>
gfs2: Put bitmap buffers in put_super
Ondrej Mosnacek <[email protected]>
selinux: check length properly in SCTP bind hook
Miklos Szeredi <[email protected]>
fuse: fix possibly missed wake-up after abort
Miklos Szeredi <[email protected]>
fuse: fix leaked notify reply
Lukas Czerner <[email protected]>
fuse: fix use-after-free in fuse_direct_IO()
Maciej W. Rozycki <[email protected]>
rtc: hctosys: Add missing range error reporting
Scott Mayhew <[email protected]>
nfsd: COPY and CLONE operations require the saved filehandle to be set
Trond Myklebust <[email protected]>
NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING
Frank Sorenson <[email protected]>
sunrpc: correct the computation for page_ptr when truncating
Christophe Leroy <[email protected]>
kdb: print real address of pointers instead of hashed addresses
Christophe Leroy <[email protected]>
kdb: use correct pointer when 'btc' calls 'btt'
Ulf Hansson <[email protected]>
ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO
Dmitry V. Levin <[email protected]>
uapi: fix linux/kfd_ioctl.h userspace compilation errors
Benjamin Coddington <[email protected]>
mnt: fix __detach_mounts infinite loop
Eric W. Biederman <[email protected]>
mount: Prevent MNT_DETACH from disconnecting locked mounts
Eric W. Biederman <[email protected]>
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
Eric W. Biederman <[email protected]>
mount: Retest MNT_LOCKED in do_umount
Vasily Averin <[email protected]>
ext4: fix buffer leak in __ext4_read_dirblock() on error path
Vasily Averin <[email protected]>
ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path
Vasily Averin <[email protected]>
ext4: fix buffer leak in ext4_xattr_move_to_block() on error path
Vasily Averin <[email protected]>
ext4: release bs.bh before re-using in ext4_xattr_block_find()
Vasily Averin <[email protected]>
ext4: fix buffer leak in ext4_xattr_get_block() on error path
Vasily Averin <[email protected]>
ext4: fix possible leak of s_journal_flag_rwsem in error path
Theodore Ts'o <[email protected]>
ext4: fix possible leak of sbi->s_group_desc_leak in error path
Theodore Ts'o <[email protected]>
ext4: avoid possible double brelse() in add_new_gdb() on error path
Vasily Averin <[email protected]>
ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing
Vasily Averin <[email protected]>
ext4: avoid buffer leak in ext4_orphan_add() after prior errors
Vasily Averin <[email protected]>
ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty()
Vasily Averin <[email protected]>
ext4: fix possible inode leak in the retry loop of ext4_resize_fs()
Vasily Averin <[email protected]>
ext4: missing !bh check in ext4_xattr_inode_write()
Vasily Averin <[email protected]>
ext4: avoid potential extra brelse in setup_new_flex_group_blocks()
Vasily Averin <[email protected]>
ext4: add missing brelse() add_new_gdb_meta_bg()'s error path
Vasily Averin <[email protected]>
ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path
Vasily Averin <[email protected]>
ext4: add missing brelse() update_backups()'s error path
Michael Kelley <[email protected]>
clockevents/drivers/i8253: Add support for PIT shutdown quirk
Shaokun Zhang <[email protected]>
btrfs: tree-checker: Fix misleading group system information
Filipe Manana <[email protected]>
Btrfs: fix data corruption due to cloning of eof block
Filipe Manana <[email protected]>
Btrfs: fix infinite loop on inode eviction after deduplication of eof block
Robbie Ko <[email protected]>
Btrfs: fix cur_offset in the error case for nocow
Filipe Manana <[email protected]>
Btrfs: fix missing data checksums after a ranged fsync (msync)
Lu Fengqi <[email protected]>
btrfs: fix pinned underflow after transaction aborted
Mathieu Malaterre <[email protected]>
watchdog/core: Add missing prototypes for weak functions
H. Peter Anvin (Intel) <[email protected]>
arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
H. Peter Anvin <[email protected]>
termios, tty/tty_baudrate.c: fix buffer overrun
Michael Kelley <[email protected]>
x86/hyper-v: Enable PIT shutdown quirk
Steven Rostedt (VMware) <[email protected]>
x86/cpu/vmware: Do not trace vmware_sched_clock()
John Garry <[email protected]>
of, numa: Validate some distance map rules
Adrian Hunter <[email protected]>
perf intel-pt: Insert callchain context into synthesized callchains
Adrian Hunter <[email protected]>
perf intel-pt/bts: Calculate cpumode for synthesized samples
David S. Miller <[email protected]>
perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}
Thomas Richter <[email protected]>
perf stat: Handle different PMU names with common prefix
Leo Yan <[email protected]>
perf cs-etm: Correct CPU mode for samples
Dmitry Osipenko <[email protected]>
hwmon: (core) Fix double-free in __hwmon_device_register()
Arnd Bergmann <[email protected]>
mtd: docg3: don't set conflicting BCH_CONST_PARAMS option
Boris Brezillon <[email protected]>
mtd: nand: Fix nanddev_neraseblocks()
Christophe JAILLET <[email protected]>
mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute()
Jarod Wilson <[email protected]>
bonding/802.3ad: fix link_failure_count tracking
Ard Biesheuvel <[email protected]>
ARM: 8809/1: proc-v7: fix Thumb annotation of cpu_v7_hvc_switch_mm
Vasily Khoruzhick <[email protected]>
netfilter: conntrack: fix calculation of next bucket number in early_drop
Michal Hocko <[email protected]>
memory_hotplug: cond_resched in __remove_pages
Andrea Arcangeli <[email protected]>
mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings
Wengang Wang <[email protected]>
ocfs2: free up write context when direct IO failed
Changwei Ge <[email protected]>
ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry
Marc Zyngier <[email protected]>
soc: ti: QMSS: Fix usage of irq_set_affinity_hint
Christophe Leroy <[email protected]>
Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP"
Ming Lei <[email protected]>
SCSI: fix queue cleanup race before queue initialization is done
Quinn Tran <[email protected]>
scsi: qla2xxx: Initialize port speed to avoid setting lower speed
Greg Edwards <[email protected]>
vhost/scsi: truncate T10 PI iov_iter to prot_bytes
John Garry <[email protected]>
crypto: hisilicon - Fix reference after free of memories on error path
John Garry <[email protected]>
crypto: hisilicon - Fix NULL dereference for same dst and src
Gustavo A. R. Silva <[email protected]>
reset: hisilicon: fix potential NULL pointer dereference
Dan Williams <[email protected]>
acpi, nfit: Fix ARS overflow continuation
Vishal Verma <[email protected]>
acpi/nfit, x86/mce: Validate a MCE's address before using it
Vishal Verma <[email protected]>
acpi/nfit, x86/mce: Handle only uncorrectable machine checks
Mikulas Patocka <[email protected]>
mach64: fix image corruption due to reading accelerator registers
Mikulas Patocka <[email protected]>
mach64: fix display corruption on big endian machines
Dmitry Osipenko <[email protected]>
thermal: core: Fix use-after-free in thermal_cooling_device_destroy_sysfs
Yan, Zheng <[email protected]>
Revert "ceph: fix dentry leak in splice_dentry()"
Ilya Dryomov <[email protected]>
libceph: bump CEPH_MSG_MAX_DATA_LEN
Enric Balletbo i Serra <[email protected]>
clk: rockchip: Fix static checker warning in rockchip_ddrclk_get_parent call
Ziyuan Xu <[email protected]>
clk: rockchip: fix wrong mmc sample phase shift for rk3328
Icenowy Zheng <[email protected]>
clk: sunxi-ng: h6: fix bus clocks' divider position
Ronald Wahl <[email protected]>
clk: at91: Fix division by zero in PLL recalc_rate()
Krzysztof Kozlowski <[email protected]>
clk: s2mps11: Fix matching when built as module and DT node contains compatible
Richard Weinberger <[email protected]>
um: Drop own definition of PTRACE_SYSEMU/_SINGLESTEP
Max Filippov <[email protected]>
xtensa: fix boot parameters address translation
Max Filippov <[email protected]>
xtensa: make sure bFLT stack is 16 byte aligned
Max Filippov <[email protected]>
xtensa: add NOTES section to the linker script
Huacai Chen <[email protected]>
MIPS: Loongson-3: Fix BRIDGE irq delivery problem
Huacai Chen <[email protected]>
MIPS: Loongson-3: Fix CPU UART irq delivery problem
Minchan Kim <[email protected]>
zram: close udev startup race condition as default groups
Jerome Brunet <[email protected]>
clk: meson: axg: mark fdiv2 and fdiv3 as critical
Christian Hewitt <[email protected]>
clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL
Aaro Koskinen <[email protected]>
arm64: dts: stratix10: fix multicast filtering
Thor Thayer <[email protected]>
arm64: dts: stratix10: Support Ethernet Jumbo frame
Johan Hovold <[email protected]>
drm/msm: fix OF child-node lookup
Miklos Szeredi <[email protected]>
fuse: set FR_SENT while locked
Miklos Szeredi <[email protected]>
fuse: fix blocked_waitq wakeup
Kirill Tkhai <[email protected]>
fuse: Fix use-after-free in fuse_dev_do_write()
Kirill Tkhai <[email protected]>
fuse: Fix use-after-free in fuse_dev_do_read()
Amir Goldstein <[email protected]>
vfs: fix FIGETBSZ ioctl on an overlayfs file
Himanshu Madhani <[email protected]>
scsi: qla2xxx: Fix driver hang when FC-NVMe LUNs are configured
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix duplicate switch database entries
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix NVMe Target discovery
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix NVMe session hang on unload
Giridhar Malavali <[email protected]>
scsi: qla2xxx: Fix for double free of SRB structure
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix re-using LoopID when handle is in use
Quinn Tran <[email protected]>
scsi: qla2xxx: Reject bsg request if chip is down.
Quinn Tran <[email protected]>
scsi: qla2xxx: shutdown chip if reset fail
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix early srb free on abort
Quinn Tran <[email protected]>
scsi: qla2xxx: Remove stale debug trace message from tcm_qla2xxx
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix process response queue for ISP26XX and above
Himanshu Madhani <[email protected]>
scsi: qla2xxx: Fix incorrect port speed being set for FC adapters
Yoshihiro Shimoda <[email protected]>
serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout
Miklos Szeredi <[email protected]>
ovl: automatically enable redirect_dir on metacopy=on
Miklos Szeredi <[email protected]>
ovl: check whiteout in ovl_create_over_whiteout()
Amir Goldstein <[email protected]>
ovl: fix recursive oi->lock in ovl_link()
Amir Goldstein <[email protected]>
ovl: fix error handling in ovl_verify_set_fh()
Young_X <[email protected]>
cdrom: fix improper type cast, which can leat to information leak.
Hugues Fruchet <[email protected]>
media: ov5640: fix restore of last mode set
Dan Carpenter <[email protected]>
drm/amdgpu: fix integer overflow test in amdgpu_bo_list_create()
Dominique Martinet <[email protected]>
9p: clear dangling pointers in p9stat_free
Hugues Fruchet <[email protected]>
media: ov5640: fix mode change regression
Sébastien Szymanski <[email protected]>
ARM: dts: imx6ull: keep IMX6UL_ prefix for signals on both i.MX6UL and i.MX6ULL
Jan Kara <[email protected]>
udf: Prevent write-unsupported filesystem to be remounted read-write
Dominique Martinet <[email protected]>
9p locks: fix glock.client_id leak in do_lock
Colin Ian King <[email protected]>
staging: most: video: fix registration of an empty comp core_component
Andrey Grodzovsky <[email protected]>
drm/amdgpu: Fix SDMA TO after GPU reset v3
Kieran Bingham <[email protected]>
drm: rcar-du: Update Gen3 output limitations
Alexandru Ardelean <[email protected]>
staging:iio:ad7606: fix voltage scales
Breno Leitao <[email protected]>
powerpc/selftests: Wait all threads to join
Marco Felsch <[email protected]>
media: tvp5150: fix width alignment during set_selection()
Phil Elwell <[email protected]>
sc16is7xx: Fix for multi-channel stall
John Garry <[email protected]>
serial: 8250_of: Fix for lack of interrupt support
Gao Xiang <[email protected]>
staging: erofs: fix a missing endian conversion
Huacai Chen <[email protected]>
MIPS/PCI: Call pcie_bus_configure_settings() to set MPS/MRRS
Rashmica Gupta <[email protected]>
powerpc/memtrace: Remove memory in chunks
Joel Stanley <[email protected]>
powerpc/boot: Ensure _zimage_start is a weak symbol
Dengcheng Zhu <[email protected]>
MIPS: kexec: Mark CPU offline before disabling local IRQ
Lucas Stach <[email protected]>
media: coda: don't overwrite h.264 profile_idc on decoder instance
Nicholas Mc Guire <[email protected]>
media: pci: cx23885: handle adding to list failure
John Garry <[email protected]>
drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer pointer
SivapiriyanKumarasamy <[email protected]>
drm/amd/display: fix gamma not being applied
Nicholas Kazlauskas <[email protected]>
drm/amd/display: Raise dispclk value for dce120 by 15%
Tomi Valkeinen <[email protected]>
drm/omap: fix memory barrier bug in DMM driver
Christophe Leroy <[email protected]>
powerpc/mm: Don't report hugepage tables as memory leaks when using kmemleak
Sean Paul <[email protected]>
drm/msm: dpu: Allow planes to extend past active display
Stephen Boyd <[email protected]>
drm/msm/disp/dpu: Use proper define for drm_encoder_init() 'encoder_type'
Anders Roxell <[email protected]>
drm/msm/gpu: fix parameters in function msm_gpu_crashstate_capture
Daniel Axtens <[email protected]>
powerpc/nohash: fix undefined behaviour when testing page size support
Fabio Estevam <[email protected]>
ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL
Colin Ian King <[email protected]>
drm/amdgpu/powerplay: fix missing break in switch statements
Gustavo A. R. Silva <[email protected]>
drm/nouveau/secboot/acr: fix memory leak
Masami Hiramatsu <[email protected]>
tracing/kprobes: Check the probe on unloaded module correctly
Miles Chen <[email protected]>
tty: check name length in tty_find_polling_driver()
Sam Bobroff <[email protected]>
powerpc/eeh: Fix possible null deref in eeh_dump_dev_log()
Joel Stanley <[email protected]>
powerpc/Makefile: Fix PPC_BOOK3S_64 ASFLAGS
Randy Dunlap <[email protected]>
Input: wm97xx-ts - fix exit path
Su Sung Chung <[email protected]>
drm/amd/display: fix bug of accessing invalid memory
Christophe Leroy <[email protected]>
powerpc/mm: fix always true/false warning in slice.c
Michael Ellerman <[email protected]>
powerpc/mm: Fix page table dump to work on Radix
Nicholas Piggin <[email protected]>
powerpc/64/module: REL32 relocation range check
Christophe Leroy <[email protected]>
powerpc/traps: restore recoverability of machine_check interrupts
-------------
Diffstat:
Documentation/filesystems/overlayfs.txt | 6 ++
Makefile | 4 +-
arch/alpha/include/asm/termios.h | 8 +-
arch/alpha/include/uapi/asm/ioctls.h | 5 +
arch/alpha/include/uapi/asm/termbits.h | 17 +++
arch/arm/boot/dts/imx6ull-pinfunc.h | 18 +++-
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/mm/proc-v7.S | 2 +-
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 9 ++
.../boot/dts/altera/socfpga_stratix10_socdk.dts | 2 +-
arch/mips/include/asm/mach-loongson64/irq.h | 2 +-
arch/mips/kernel/crash.c | 3 +
arch/mips/kernel/machine_kexec.c | 3 +
arch/mips/loongson64/loongson-3/irq.c | 56 ++--------
arch/mips/pci/pci-legacy.c | 4 +
arch/powerpc/Makefile | 6 +-
arch/powerpc/boot/crt0.S | 4 +-
arch/powerpc/include/asm/mmu-8xx.h | 34 ++----
arch/powerpc/kernel/eeh.c | 5 +
arch/powerpc/kernel/head_8xx.S | 45 ++++----
arch/powerpc/kernel/module_64.c | 9 +-
arch/powerpc/kernel/traps.c | 9 +-
arch/powerpc/mm/8xx_mmu.c | 2 +-
arch/powerpc/mm/dump_linuxpagetables.c | 12 ++-
arch/powerpc/mm/hugetlbpage.c | 3 +
arch/powerpc/mm/slice.c | 21 ++--
arch/powerpc/mm/tlb_nohash.c | 3 +
arch/powerpc/platforms/powernv/memtrace.c | 21 +++-
arch/x86/include/asm/mce.h | 2 +
arch/x86/kernel/cpu/mcheck/mce.c | 6 +-
arch/x86/kernel/cpu/mshyperv.c | 11 ++
arch/x86/kernel/cpu/vmware.c | 2 +-
arch/x86/um/shared/sysdep/ptrace_32.h | 10 --
arch/xtensa/boot/Makefile | 2 +-
arch/xtensa/include/asm/processor.h | 6 +-
arch/xtensa/kernel/head.S | 7 +-
arch/xtensa/kernel/vmlinux.lds.S | 1 +
block/blk-core.c | 5 +-
crypto/crypto_user.c | 18 ++--
drivers/acpi/nfit/core.c | 4 +-
drivers/acpi/nfit/mce.c | 8 +-
drivers/ata/libata-core.c | 2 +-
drivers/block/zram/zram_drv.c | 26 ++---
drivers/cdrom/cdrom.c | 2 +-
drivers/clk/at91/clk-pll.c | 3 +
drivers/clk/clk-s2mps11.c | 30 ++++++
drivers/clk/hisilicon/reset.c | 5 +-
drivers/clk/meson/axg.c | 13 +++
drivers/clk/meson/gxbb.c | 12 +++
drivers/clk/rockchip/clk-ddr.c | 4 -
drivers/clk/rockchip/clk-rk3328.c | 8 +-
drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 +-
drivers/clocksource/i8253.c | 14 ++-
drivers/cpuidle/cpuidle-arm.c | 22 ++--
drivers/crypto/hisilicon/sec/sec_algs.c | 31 +++---
drivers/firmware/efi/libstub/fdt.c | 4 +
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 17 ++-
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c | 3 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 3 +-
drivers/gpu/drm/amd/display/dc/core/dc.c | 19 +++-
drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c | 3 +
.../drm/amd/display/modules/color/color_gamma.c | 8 +-
drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c | 5 +-
drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c | 2 +
drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c | 2 +
.../gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c | 2 +
.../gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c | 2 +
.../gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c | 2 +
drivers/gpu/drm/drm_atomic_helper.c | 21 +++-
drivers/gpu/drm/drm_dp_mst_topology.c | 3 +
drivers/gpu/drm/drm_panel_orientation_quirks.c | 14 ++-
drivers/gpu/drm/etnaviv/etnaviv_sched.c | 2 +-
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 1 +
drivers/gpu/drm/i915/gvt/gtt.h | 1 -
drivers/gpu/drm/i915/i915_gem.c | 12 +--
drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +-
drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +-
drivers/gpu/drm/i915/i915_gem_gtt.h | 36 ++++---
drivers/gpu/drm/i915/i915_reg.h | 8 +-
drivers/gpu/drm/i915/intel_audio.c | 17 +++
drivers/gpu/drm/i915/intel_display.c | 120 +++++++++++----------
drivers/gpu/drm/i915/intel_dp.c | 50 ++++++---
drivers/gpu/drm/i915/intel_dp_link_training.c | 26 ++---
drivers/gpu/drm/i915/intel_dp_mst.c | 49 ++++-----
drivers/gpu/drm/i915/intel_hotplug.c | 70 ++++++++----
drivers/gpu/drm/i915/intel_lpe_audio.c | 4 +-
drivers/gpu/drm/i915/intel_lrc.c | 14 ++-
drivers/gpu/drm/i915/intel_ringbuffer.c | 38 ++++++-
drivers/gpu/drm/i915/selftests/huge_pages.c | 2 +-
drivers/gpu/drm/i915/selftests/i915_gem_gtt.c | 6 +-
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 5 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 3 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 34 +++---
drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 1 -
drivers/gpu/drm/msm/msm_drv.h | 2 +
drivers/gpu/drm/msm/msm_gpu.c | 4 +-
drivers/gpu/drm/nouveau/dispnv50/disp.c | 14 +--
drivers/gpu/drm/nouveau/nouveau_backlight.c | 4 +-
.../gpu/drm/nouveau/nvkm/subdev/secboot/acr_r352.c | 1 +
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 11 ++
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 14 ++-
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 6 ++
drivers/hwmon/hwmon.c | 8 +-
drivers/input/touchscreen/wm97xx-core.c | 3 +-
drivers/media/i2c/ov5640.c | 33 ++++--
drivers/media/i2c/tvp5150.c | 14 ++-
drivers/media/pci/cx23885/altera-ci.c | 10 ++
drivers/media/platform/coda/coda-common.c | 3 +-
drivers/mtd/devices/Kconfig | 2 +-
drivers/mtd/spi-nor/cadence-quadspi.c | 2 +-
drivers/net/bonding/bond_main.c | 4 +-
drivers/of/of_numa.c | 9 +-
drivers/rtc/hctosys.c | 4 +-
drivers/scsi/qla2xxx/qla_bsg.c | 2 +-
drivers/scsi/qla2xxx/qla_gs.c | 9 +-
drivers/scsi/qla2xxx/qla_init.c | 40 +++----
drivers/scsi/qla2xxx/qla_iocb.c | 17 ---
drivers/scsi/qla2xxx/qla_mbx.c | 5 +-
drivers/scsi/qla2xxx/qla_nvme.c | 5 +-
drivers/scsi/qla2xxx/qla_os.c | 4 +-
drivers/scsi/qla2xxx/qla_target.c | 3 +-
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 -
drivers/scsi/scsi_lib.c | 8 ++
drivers/soc/ti/knav_qmss.h | 4 +-
drivers/soc/ti/knav_qmss_acc.c | 10 +-
drivers/soc/ti/knav_qmss_queue.c | 22 ++--
drivers/staging/erofs/unzip_vle.c | 8 +-
drivers/staging/iio/adc/ad7606.c | 7 +-
drivers/staging/most/video/video.c | 4 +-
drivers/thermal/thermal_core.c | 3 +-
drivers/tty/serial/8250/8250_of.c | 22 ++--
drivers/tty/serial/sc16is7xx.c | 19 ++--
drivers/tty/serial/sh-sci.c | 4 +-
drivers/tty/tty_baudrate.c | 4 +-
drivers/tty/tty_io.c | 2 +-
drivers/vhost/scsi.c | 4 +-
drivers/video/fbdev/aty/mach64_accel.c | 28 +++--
fs/9p/vfs_file.c | 16 ++-
fs/btrfs/disk-io.c | 12 ++-
fs/btrfs/inode.c | 5 +-
fs/btrfs/ioctl.c | 14 ++-
fs/btrfs/tree-checker.c | 2 +-
fs/btrfs/tree-log.c | 17 +++
fs/ceph/inode.c | 8 +-
fs/ext4/inode.c | 5 +-
fs/ext4/namei.c | 5 +-
fs/ext4/resize.c | 28 ++---
fs/ext4/super.c | 17 +--
fs/ext4/xattr.c | 21 +++-
fs/fuse/dev.c | 41 +++++--
fs/fuse/file.c | 4 +-
fs/gfs2/bmap.c | 14 ++-
fs/gfs2/rgrp.c | 3 +-
fs/inode.c | 7 +-
fs/ioctl.c | 3 +
fs/namespace.c | 28 +++--
fs/nfs/nfs4state.c | 8 +-
fs/nfsd/nfs4proc.c | 3 +
fs/ocfs2/aops.c | 12 ++-
fs/ocfs2/cluster/masklog.h | 9 ++
fs/ocfs2/dir.c | 3 +-
fs/overlayfs/dir.c | 8 ++
fs/overlayfs/namei.c | 4 +-
fs/overlayfs/super.c | 36 +++++--
fs/udf/super.c | 30 +++---
fs/udf/udf_sb.h | 2 +
include/linux/ceph/libceph.h | 8 +-
include/linux/i8253.h | 1 +
include/linux/mtd/nand.h | 5 +-
include/linux/nmi.h | 2 +
include/uapi/linux/kfd_ioctl.h | 8 +-
include/xen/xen-ops.h | 2 +-
kernel/debug/kdb/kdb_bt.c | 4 +-
kernel/debug/kdb/kdb_main.c | 14 +--
kernel/debug/kdb/kdb_support.c | 12 +--
kernel/trace/trace_kprobe.c | 39 ++++---
lib/ubsan.c | 3 +-
mm/hugetlb.c | 23 +++-
mm/memory_hotplug.c | 1 +
mm/mempolicy.c | 32 +++++-
mm/swapfile.c | 6 +-
net/9p/protocol.c | 5 +
net/netfilter/nf_conntrack_core.c | 13 ++-
net/sunrpc/xdr.c | 5 +-
scripts/spdxcheck.py | 1 -
security/selinux/hooks.c | 3 +
tools/perf/util/cs-etm.c | 39 +++++--
tools/perf/util/intel-bts.c | 17 ++-
tools/perf/util/intel-pt.c | 28 +++--
tools/perf/util/machine.c | 35 +++++-
tools/perf/util/pmu.c | 2 +-
tools/perf/util/thread-stack.c | 44 ++++++--
tools/perf/util/thread-stack.h | 2 +-
tools/testing/selftests/powerpc/tm/tm-tmspr.c | 27 +++--
198 files changed, 1542 insertions(+), 785 deletions(-)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
[ Upstream commit daf00ae71dad8aa05965713c62558aeebf2df48e ]
commit b96672dd840f ("powerpc: Machine check interrupt is a non-
maskable interrupt") added a call to nmi_enter() at the beginning of
machine check restart exception handler. Due to that, in_interrupt()
always returns true regardless of the state before entering the
exception, and die() panics even when the system was not already in
interrupt.
This patch calls nmi_exit() before calling die() in order to restore
the interrupt state we had before calling nmi_enter()
Fixes: b96672dd840f ("powerpc: Machine check interrupt is a non-maskable interrupt")
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/traps.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -767,12 +767,17 @@ void machine_check_exception(struct pt_r
if (check_io_access(regs))
goto bail;
- die("Machine check", regs, SIGBUS);
-
/* Must die if the interrupt is not recoverable */
if (!(regs->msr & MSR_RI))
nmi_panic(regs, "Unrecoverable Machine check");
+ if (!nested)
+ nmi_exit();
+
+ die("Machine check", regs, SIGBUS);
+
+ return;
+
bail:
if (!nested)
nmi_exit();
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit 74a07c0a59fa372b069d879971ba4d9e341979cf ]
In case memory resources for *bl_desc* were allocated, release
them before return.
Addresses-Coverity-ID: 1472021 ("Resource leak")
Fixes: 0d466901552a ("drm/nouveau/secboot/acr: Remove VLA usage")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Ben Skeggs <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/nvkm/subdev/secboot/acr_r352.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/acr_r352.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/acr_r352.c
@@ -801,6 +801,7 @@ acr_r352_load(struct nvkm_acr *_acr, str
bl = acr->hsbl_unload_blob;
} else {
nvkm_error(_acr->subdev, "invalid secure boot blob!\n");
+ kfree(bl_desc);
return -EINVAL;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <[email protected]>
[ Upstream commit 14b284832e7dea6f54f0adfd7bed105548b94e57 ]
There are several switch statements that are missing break statements.
Add missing breaks to handle any fall-throughs corner cases.
Detected by CoverityScan, CID#1457175 ("Missing break in switch")
Fixes: 18aafc59b106 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c | 2 ++
drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c | 2 ++
drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c | 2 ++
drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c | 2 ++
drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c | 2 ++
5 files changed, 10 insertions(+)
--- a/drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c
@@ -2268,11 +2268,13 @@ static uint32_t ci_get_offsetof(uint32_t
case DRAM_LOG_BUFF_SIZE:
return offsetof(SMU7_SoftRegisters, DRAM_LOG_BUFF_SIZE);
}
+ break;
case SMU_Discrete_DpmTable:
switch (member) {
case LowSclkInterruptThreshold:
return offsetof(SMU7_Discrete_DpmTable, LowSclkInterruptT);
}
+ break;
}
pr_debug("can't get the offset of type %x member %x\n", type, member);
return 0;
--- a/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/fiji_smumgr.c
@@ -2330,6 +2330,7 @@ static uint32_t fiji_get_offsetof(uint32
case DRAM_LOG_BUFF_SIZE:
return offsetof(SMU73_SoftRegisters, DRAM_LOG_BUFF_SIZE);
}
+ break;
case SMU_Discrete_DpmTable:
switch (member) {
case UvdBootLevel:
@@ -2339,6 +2340,7 @@ static uint32_t fiji_get_offsetof(uint32
case LowSclkInterruptThreshold:
return offsetof(SMU73_Discrete_DpmTable, LowSclkInterruptThreshold);
}
+ break;
}
pr_warn("can't get the offset of type %x member %x\n", type, member);
return 0;
--- a/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c
@@ -2236,11 +2236,13 @@ static uint32_t iceland_get_offsetof(uin
case DRAM_LOG_BUFF_SIZE:
return offsetof(SMU71_SoftRegisters, DRAM_LOG_BUFF_SIZE);
}
+ break;
case SMU_Discrete_DpmTable:
switch (member) {
case LowSclkInterruptThreshold:
return offsetof(SMU71_Discrete_DpmTable, LowSclkInterruptThreshold);
}
+ break;
}
pr_warn("can't get the offset of type %x member %x\n", type, member);
return 0;
--- a/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c
@@ -2618,6 +2618,7 @@ static uint32_t tonga_get_offsetof(uint3
case DRAM_LOG_BUFF_SIZE:
return offsetof(SMU72_SoftRegisters, DRAM_LOG_BUFF_SIZE);
}
+ break;
case SMU_Discrete_DpmTable:
switch (member) {
case UvdBootLevel:
@@ -2627,6 +2628,7 @@ static uint32_t tonga_get_offsetof(uint3
case LowSclkInterruptThreshold:
return offsetof(SMU72_Discrete_DpmTable, LowSclkInterruptThreshold);
}
+ break;
}
pr_warn("can't get the offset of type %x member %x\n", type, member);
return 0;
--- a/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c
@@ -2184,6 +2184,7 @@ static uint32_t vegam_get_offsetof(uint3
case DRAM_LOG_BUFF_SIZE:
return offsetof(SMU75_SoftRegisters, DRAM_LOG_BUFF_SIZE);
}
+ break;
case SMU_Discrete_DpmTable:
switch (member) {
case UvdBootLevel:
@@ -2193,6 +2194,7 @@ static uint32_t vegam_get_offsetof(uint3
case LowSclkInterruptThreshold:
return offsetof(SMU75_Discrete_DpmTable, LowSclkInterruptThreshold);
}
+ break;
}
pr_warn("can't get the offset of type %x member %x\n", type, member);
return 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabio Estevam <[email protected]>
[ Upstream commit 35d3cbe84544da74e39e1cec01374092467e3119 ]
Andreas Müller reports:
"Fixes:
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported
and nasty follow-ups: Starting weston from sddm as unpriviledged user fails
with some hints on missing access rights."
Select the CONFIG_TMPFS_POSIX_ACL option to fix these issues.
Reported-by: Andreas Müller <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Otavio Salvador <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -409,6 +409,7 @@ CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
+CONFIG_TMPFS_POSIX_ACL=y
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Axtens <[email protected]>
[ Upstream commit f5e284803a7206d43e26f9ffcae5de9626d95e37 ]
When enumerating page size definitions to check hardware support,
we construct a constant which is (1U << (def->shift - 10)).
However, the array of page size definitions is only initalised for
various MMU_PAGE_* constants, so it contains a number of 0-initialised
elements with def->shift == 0. This means we end up shifting by a
very large number, which gives the following UBSan splat:
================================================================================
UBSAN: Undefined behaviour in /home/dja/dev/linux/linux/arch/powerpc/mm/tlb_nohash.c:506:21
shift exponent 4294967286 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-00045-ga604f927b012-dirty #6
Call Trace:
[c00000000101bc20] [c000000000a13d54] .dump_stack+0xa8/0xec (unreliable)
[c00000000101bcb0] [c0000000004f20a8] .ubsan_epilogue+0x18/0x64
[c00000000101bd30] [c0000000004f2b10] .__ubsan_handle_shift_out_of_bounds+0x110/0x1a4
[c00000000101be20] [c000000000d21760] .early_init_mmu+0x1b4/0x5a0
[c00000000101bf10] [c000000000d1ba28] .early_setup+0x100/0x130
[c00000000101bf90] [c000000000000528] start_here_multiplatform+0x68/0x80
================================================================================
Fix this by first checking if the element exists (shift != 0) before
constructing the constant.
Signed-off-by: Daniel Axtens <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/tlb_nohash.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -503,6 +503,9 @@ static void setup_page_sizes(void)
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
struct mmu_psize_def *def = &mmu_psize_defs[psize];
+ if (!def->shift)
+ continue;
+
if (tlb1ps & (1U << (def->shift - 10))) {
def->flags |= MMU_PAGE_SIZE_DIRECT;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anders Roxell <[email protected]>
[ Upstream commit 6969019f65b43afb6da6a26f1d9e55bbdfeebcd5 ]
When CONFIG_DEV_COREDUMP isn't defined msm_gpu_crashstate_capture
doesn't pass the correct parameters.
drivers/gpu/drm/msm/msm_gpu.c: In function ‘recover_worker’:
drivers/gpu/drm/msm/msm_gpu.c:479:34: error: passing argument 2 of ‘msm_gpu_crashstate_capture’ from incompatible pointer type [-Werror=incompatible-pointer-types]
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: expected ‘char *’ but argument is of type ‘struct msm_gem_submit *’
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:479:2: error: too many arguments to function ‘msm_gpu_crashstate_capture’
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: declared here
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
In current code the function msm_gpu_crashstate_capture parameters.
Fixes: cdb95931dea3 ("drm/msm/gpu: Add the buffer objects from the submit to the crash dump")
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-By: Jordan Crouse <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/msm/msm_gpu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -367,8 +367,8 @@ static void msm_gpu_crashstate_capture(s
msm_gpu_devcoredump_read, msm_gpu_devcoredump_free);
}
#else
-static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
- char *cmd)
+static void msm_gpu_crashstate_capture(struct msm_gpu *gpu,
+ struct msm_gem_submit *submit, char *comm, char *cmd)
{
}
#endif
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd <[email protected]>
[ Upstream commit 2c043eeffea4813b8f569e84b46035a08de5eb47 ]
We got a bug report that this function oopses when trying to do a kasprintf().
PC is at string+0x2c/0x60
LR is at vsnprintf+0x28c/0x4ec
pc : [<ffffff80088d35d8>] lr : [<ffffff80088d5fc4>] pstate: a0c00049
sp : ffffff80095fb540
x29: ffffff80095fb540 x28: ffffff8008ad42bc
x27: 00000000ffffffd8 x26: 0000000000000000
x25: ffffff8008c216c8 x24: 0000000000000000
x23: 0000000000000000 x22: ffffff80095fb720
x21: 0000000000000000 x20: ffffff80095fb720
x19: ffffff80095fb6f0 x18: 000000000000000a
x17: 00000000b42ba473 x16: ffffff800805bbe8
x15: 00000000000a157d x14: 000000000000000c
x13: 0000000000000000 x12: 0000ffff0000000f
x11: 0000000000000003 x10: 0000000000000001
x9 : 0000000000000040 x8 : 000000000000001c
x7 : ffffffffffffffff x6 : 0000000000000000
x5 : 0000000000000228 x4 : 0000000000000000
x3 : ffff0a00ffffff04 x2 : 0000000000007961
x1 : 0000000000000000 x0 : 0000000000000000
Process kworker/3:1 (pid: 61, stack limit = 0xffffff80095f8000)
Call trace:
Exception stack(0xffffff80095fb400 to 0xffffff80095fb540)
b400: 0000000000000000 0000000000000000 0000000000007961 ffff0a00ffffff04
b420: 0000000000000000 0000000000000228 0000000000000000 ffffffffffffffff
b440: 000000000000001c 0000000000000040 0000000000000001 0000000000000003
b460: 0000ffff0000000f 0000000000000000 000000000000000c 00000000000a157d
b480: ffffff800805bbe8 00000000b42ba473 000000000000000a ffffff80095fb6f0
b4a0: ffffff80095fb720 0000000000000000 ffffff80095fb720 0000000000000000
b4c0: 0000000000000000 ffffff8008c216c8 0000000000000000 00000000ffffffd8
b4e0: ffffff8008ad42bc ffffff80095fb540 ffffff80088d5fc4 ffffff80095fb540
b500: ffffff80088d35d8 00000000a0c00049 ffffff80095fb550 ffffff80080d06a4
b520: ffffffffffffffff ffffff80088d5e0c ffffff80095fb540 ffffff80088d35d8
[<ffffff80088d35d8>] string+0x2c/0x60
[<ffffff80088d5fc4>] vsnprintf+0x28c/0x4ec
[<ffffff80083973b8>] kvasprintf+0x68/0x100
[<ffffff800839755c>] kasprintf+0x60/0x80
[<ffffff800849cc24>] drm_encoder_init+0x134/0x164
[<ffffff80084d9a7c>] dpu_encoder_init+0x60/0x94
[<ffffff80084eced0>] _dpu_kms_drm_obj_init+0xa0/0x424
[<ffffff80084ed870>] dpu_kms_hw_init+0x61c/0x6bc
[<ffffff80084f7614>] msm_drm_bind+0x380/0x67c
[<ffffff80085114e4>] try_to_bring_up_master+0x228/0x264
[<ffffff80085116e8>] component_master_add_with_match+0x90/0xc0
[<ffffff80084f722c>] msm_pdev_probe+0x260/0x2c8
[<ffffff800851a910>] platform_drv_probe+0x58/0xa8
[<ffffff80085185c8>] driver_probe_device+0x2d8/0x40c
[<ffffff8008518928>] __device_attach_driver+0xd4/0x10c
[<ffffff800851644c>] bus_for_each_drv+0xb4/0xd0
[<ffffff8008518230>] __device_attach+0xd0/0x160
[<ffffff8008518984>] device_initial_probe+0x24/0x30
[<ffffff800851744c>] bus_probe_device+0x38/0x98
[<ffffff8008517aac>] deferred_probe_work_func+0x144/0x148
[<ffffff80080c8654>] process_one_work+0x218/0x3bc
[<ffffff80080c883c>] process_scheduled_works+0x44/0x48
[<ffffff80080c95bc>] worker_thread+0x288/0x32c
[<ffffff80080cea30>] kthread+0x134/0x13c
[<ffffff8008084750>] ret_from_fork+0x10/0x18
Code: 910003fd 2a0403e6 eb0400ff 54000060 (38646845)
Looking at the code I see that drm_encoder_init() is called from the DPU
code with 'DRM_MODE_CONNECTOR_DSI' passed in as the 'encoder_type'
argument (follow from _dpu_kms_initialize_dsi()). That corresponds to
the integer 16. That is then indexed into drm_encoder_enum_list in
drm_encoder_init() to look up the name of the encoder. If you're still
following along, that's an encoder not a connector! We really want to
use DRM_MODE_ENCODER_DSI (integer 6) instead of DRM_MODE_CONNECTOR_DSI
here, or we'll go out of bounds of the encoder array. Pass the right
thing and everything is fine.
Cc: Jeykumar Sankaran <[email protected]>
Cc: Jordan Crouse <[email protected]>
Cc: Sean Paul <[email protected]>
Fixes: 25fdd5933e4c (drm/msm: Add SDM845 DPU support)
Tested-by: Sai Prakash Ranjan <[email protected]>
Reviewed-by: Jeykumar Sankaran <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -450,7 +450,7 @@ static void _dpu_kms_initialize_dsi(stru
int i, rc;
/*TODO: Support two independent DSI connectors */
- encoder = dpu_encoder_init(dev, DRM_MODE_CONNECTOR_DSI);
+ encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DSI);
if (IS_ERR_OR_NULL(encoder)) {
DPU_ERROR("encoder init failed for dsi display\n");
return;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
[ Upstream commit 803d690e68f0c5230183f1a42c7d50a41d16e380 ]
When a process allocates a hugepage, the following leak is
reported by kmemleak. This is a false positive which is
due to the pointer to the table being stored in the PGD
as physical memory address and not virtual memory pointer.
unreferenced object 0xc30f8200 (size 512):
comm "mmap", pid 374, jiffies 4872494 (age 627.630s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<e32b68da>] huge_pte_alloc+0xdc/0x1f8
[<9e0df1e1>] hugetlb_fault+0x560/0x8f8
[<7938ec6c>] follow_hugetlb_page+0x14c/0x44c
[<afbdb405>] __get_user_pages+0x1c4/0x3dc
[<b8fd7cd9>] __mm_populate+0xac/0x140
[<3215421e>] vm_mmap_pgoff+0xb4/0xb8
[<c148db69>] ksys_mmap_pgoff+0xcc/0x1fc
[<4fcd760f>] ret_from_syscall+0x0/0x38
See commit a984506c542e2 ("powerpc/mm: Don't report PUDs as
memory leaks when using kmemleak") for detailed explanation.
To fix that, this patch tells kmemleak to ignore the allocated
hugepage table.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/hugetlbpage.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -19,6 +19,7 @@
#include <linux/moduleparam.h>
#include <linux/swap.h>
#include <linux/swapops.h>
+#include <linux/kmemleak.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlb.h>
@@ -112,6 +113,8 @@ static int __hugepte_alloc(struct mm_str
for (i = i - 1 ; i >= 0; i--, hpdp--)
*hpdp = __hugepd(0);
kmem_cache_free(cachep, new);
+ } else {
+ kmemleak_ignore(new);
}
spin_unlock(ptl);
return 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomi Valkeinen <[email protected]>
[ Upstream commit 538f66ba204944470a653a4cccc5f8befdf97c22 ]
A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.
Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.
The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.
This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):
* If a DMM timeout happened when a GEM buffer was being pinned for
display on the screen, a timeout error would be shown, but the driver
would continue programming DSS HW with broken buffer, leading to
SYNCLOST floods and possible crashes.
* If a DMM timeout happened when other user (say, video decoder) was
pinning a GEM buffer, a timeout would be shown but if the user
handled the error properly, no other issues followed.
* If a DMM timeout happened when a GEM buffer was being released, the
driver does not even notice the error, leading to crashes or hang
later.
This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.
The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -285,6 +285,17 @@ static int dmm_txn_commit(struct dmm_txn
}
txn->last_pat->next_pa = 0;
+ /* ensure that the written descriptors are visible to DMM */
+ wmb();
+
+ /*
+ * NOTE: the wmb() above should be enough, but there seems to be a bug
+ * in OMAP's memory barrier implementation, which in some rare cases may
+ * cause the writes not to be observable after wmb().
+ */
+
+ /* read back to ensure the data is in RAM */
+ readl(&txn->last_pat->next_pa);
/* write to PAT_DESCR to clear out any pending transaction */
dmm_write(dmm, 0x0, reg[PAT_DESCR][engine->id]);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
[ Upstream commit 0d923962ab69c27cca664a2d535e90ef655110ca ]
When we're running on Book3S with the Radix MMU enabled the page table
dump currently prints the wrong addresses because it uses the wrong
start address.
Fix it to use PAGE_OFFSET rather than KERN_VIRT_START.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/dump_linuxpagetables.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/arch/powerpc/mm/dump_linuxpagetables.c
+++ b/arch/powerpc/mm/dump_linuxpagetables.c
@@ -418,12 +418,13 @@ static void walk_pagetables(struct pg_st
unsigned int i;
unsigned long addr;
+ addr = st->start_address;
+
/*
* Traverse the linux pagetable structure and dump pages that are in
* the hash pagetable.
*/
- for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
- addr = KERN_VIRT_START + i * PGDIR_SIZE;
+ for (i = 0; i < PTRS_PER_PGD; i++, pgd++, addr += PGDIR_SIZE) {
if (!pgd_none(*pgd) && !pgd_huge(*pgd))
/* pgd exists */
walk_pud(st, pgd, addr);
@@ -472,9 +473,14 @@ static int ptdump_show(struct seq_file *
{
struct pg_state st = {
.seq = m,
- .start_address = KERN_VIRT_START,
.marker = address_markers,
};
+
+ if (radix_enabled())
+ st.start_address = PAGE_OFFSET;
+ else
+ st.start_address = KERN_VIRT_START;
+
/* Traverse kernel page tables */
walk_pagetables(&st);
note_page(&st, 0, 0, 0);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap <[email protected]>
[ Upstream commit a3f7c3fcf60868c1e90671df5d0cf9be5900a09b ]
Loading then unloading wm97xx-ts.ko when CONFIG_AC97_BUS=m
causes a WARNING: from drivers/base/driver.c:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 1709 at ../drivers/base/driver.c:193 driver_unregister+0x30/0x40
Fix this by only calling driver_unregister() with the same
condition that driver_register() is called.
Fixes: ae9d1b5fbd7b ("Input: wm97xx: add new AC97 bus support")
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/touchscreen/wm97xx-core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -929,7 +929,8 @@ static int __init wm97xx_init(void)
static void __exit wm97xx_exit(void)
{
- driver_unregister(&wm97xx_driver);
+ if (IS_BUILTIN(CONFIG_AC97_BUS))
+ driver_unregister(&wm97xx_driver);
platform_driver_unregister(&wm97xx_mfd_driver);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joel Stanley <[email protected]>
[ Upstream commit 960e30029863db95ec79a71009272d4661db5991 ]
Ever since commit 15a3204d24a3 ("powerpc/64s: Set assembler machine type
to POWER4") we force -mpower4 to be passed to the assembler
irrespective of the CFLAGS used (for Book3s 64).
When building a powerpc64 kernel with clang, clang will not add -many
to the assembler flags, so any instructions that the compiler has
generated that are not available on power4 will cause an error:
/usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \
-I ./arch/powerpc/include -I ./arch/powerpc/include/generated \
-I ./include -I ./arch/powerpc/include/uapi \
-I ./arch/powerpc/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \
-maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s
/tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel'
GCC does include -many, so the GCC driven gas call will succeed:
as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I
./include -I ./arch/powerpc/include/uapi
-I ./arch/powerpc/include/generated/uapi -I ./include/uapi
-I ./include/generated/uapi -I arch/powerpc -I arch/powerpc
-a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o
Note that isel is power7 and above for IBM CPUs. GCC only generates it
for Power9 and above, but the above test was run against the clang
generated assembly.
Peter Bergner explains:
When using -many -mpower4, gas will first try and find a matching
power4 mnemonic and failing that, it will then allow any valid
mnemonic that gas knows about. GCC's use of -many predates me
though.
IIRC, Alan looked at trying to remove it, but I forget why he
didn't. Could be either a gcc or gas issue at the time. I'm not sure
whether issue still exists or not. He and I have modified how gas
works internally a fair amount since he tried removing gcc use of
-many.
I will also note that when using -many, gas will choose the first
mnemonic that matches in the mnemonic table and we have (mostly)
sorted the table so that server mnemonics show up earlier in the
table than other mnemonics, so they'll be seen/chosen first.
By explicitly setting -many we can build with Clang and GCC while
retaining the -mpower4 option.
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/Makefile | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -238,7 +238,11 @@ cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_ALTIVEC) += $(call as-option,-Wa$(comma)-maltivec)
cpu-as-$(CONFIG_E200) += -Wa,-me200
cpu-as-$(CONFIG_E500) += -Wa,-me500
-cpu-as-$(CONFIG_PPC_BOOK3S_64) += -Wa,-mpower4
+
+# When using '-many -mpower4' gas will first try and find a matching power4
+# mnemonic and failing that it will allow any valid mnemonic that GAS knows
+# about. GCC will pass -many to GAS when assembling, clang does not.
+cpu-as-$(CONFIG_PPC_BOOK3S_64) += -Wa,-mpower4 -Wa,-many
cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc)
KBUILD_AFLAGS += $(cpu-as-y)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miles Chen <[email protected]>
[ Upstream commit 33a1a7be198657c8ca26ad406c4d2a89b7162bcc ]
The issue is found by a fuzzing test.
If tty_find_polling_driver() recevies an incorrect input such as
',,' or '0b', the len becomes 0 and strncmp() always return 0.
In this case, a null p->ops->poll_init() is called and it causes a kernel
panic.
Fix this by checking name length against zero in tty_find_polling_driver().
$echo ,, > /sys/module/kgdboc/parameters/kgdboc
[ 20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457
uart_get_baud_rate+0xe8/0x190
[ 20.804917] Modules linked in:
[ 20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8
[ 20.805469] Hardware name: linux,dummy-virt (DT)
[ 20.805732] pstate: 20000005 (nzCv daif -PAN -UAO)
[ 20.805895] pc : uart_get_baud_rate+0xe8/0x190
[ 20.806042] lr : uart_get_baud_rate+0xc0/0x190
[ 20.806476] sp : ffffffc06acff940
[ 20.806676] x29: ffffffc06acff940 x28: 0000000000002580
[ 20.806977] x27: 0000000000009600 x26: 0000000000009600
[ 20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0
[ 20.807576] x23: 0000000000000001 x22: 0000000000000000
[ 20.807807] x21: 0000000000000001 x20: 0000000000000000
[ 20.808049] x19: ffffffc06acffac8 x18: 0000000000000000
[ 20.808277] x17: 0000000000000000 x16: 0000000000000000
[ 20.808520] x15: ffffffffffffffff x14: ffffffff00000000
[ 20.808757] x13: ffffffffffffffff x12: 0000000000000001
[ 20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f
[ 20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3
[ 20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f
[ 20.809803] x5 : 0000000080008001 x4 : 0000000000000003
[ 20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000
[ 20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0
[ 20.811005] Call trace:
[ 20.811214] uart_get_baud_rate+0xe8/0x190
[ 20.811479] serial8250_do_set_termios+0xe0/0x6f4
[ 20.811719] serial8250_set_termios+0x48/0x54
[ 20.811928] uart_set_options+0x138/0x1bc
[ 20.812129] uart_poll_init+0x114/0x16c
[ 20.812330] tty_find_polling_driver+0x158/0x200
[ 20.812545] configure_kgdboc+0xbc/0x1bc
[ 20.812745] param_set_kgdboc_var+0xb8/0x150
[ 20.812960] param_attr_store+0xbc/0x150
[ 20.813160] module_attr_store+0x40/0x58
[ 20.813364] sysfs_kf_write+0x8c/0xa8
[ 20.813563] kernfs_fop_write+0x154/0x290
[ 20.813764] vfs_write+0xf0/0x278
[ 20.813951] __arm64_sys_write+0x84/0xf4
[ 20.814400] el0_svc_common+0xf4/0x1dc
[ 20.814616] el0_svc_handler+0x98/0xbc
[ 20.814804] el0_svc+0x8/0xc
[ 20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 20.826913] Mem abort info:
[ 20.827103] ESR = 0x84000006
[ 20.827352] Exception class = IABT (current EL), IL = 16 bits
[ 20.827655] SET = 0, FnV = 0
[ 20.827855] EA = 0, S1PTW = 0
[ 20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____)
[ 20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000
[ 20.829195] Internal error: Oops: 84000006 [#1] SMP
[ 20.829564] Modules linked in:
[ 20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G W 4.19.0-rc7ajb #8
[ 20.830545] Hardware name: linux,dummy-virt (DT)
[ 20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 20.831174] pc : (null)
[ 20.831457] lr : serial8250_do_set_termios+0x358/0x6f4
[ 20.831727] sp : ffffffc06acff9b0
[ 20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000
[ 20.832267] x27: ffffff900969e16f x26: 0000000000000000
[ 20.832589] x25: ffffff900969dfb0 x24: 0000000000000000
[ 20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160
[ 20.833232] x21: 0000000000000000 x20: ffffffc06acffac8
[ 20.833559] x19: ffffff900969df90 x18: 0000000000000000
[ 20.833878] x17: 0000000000000000 x16: 0000000000000000
[ 20.834491] x15: ffffffffffffffff x14: ffffffff00000000
[ 20.834821] x13: ffffffffffffffff x12: 0000000000000001
[ 20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f
[ 20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3
[ 20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f
[ 20.836111] x5 : c06419717c314100 x4 : 0000000000000007
[ 20.836419] x3 : 0000000000000000 x2 : 0000000000000000
[ 20.836732] x1 : 0000000000000001 x0 : ffffff900969df90
[ 20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____))
[ 20.837396] Call trace:
[ 20.837566] (null)
[ 20.837816] serial8250_set_termios+0x48/0x54
[ 20.838089] uart_set_options+0x138/0x1bc
[ 20.838570] uart_poll_init+0x114/0x16c
[ 20.838834] tty_find_polling_driver+0x158/0x200
[ 20.839119] configure_kgdboc+0xbc/0x1bc
[ 20.839380] param_set_kgdboc_var+0xb8/0x150
[ 20.839658] param_attr_store+0xbc/0x150
[ 20.839920] module_attr_store+0x40/0x58
[ 20.840183] sysfs_kf_write+0x8c/0xa8
[ 20.840183] sysfs_kf_write+0x8c/0xa8
[ 20.840440] kernfs_fop_write+0x154/0x290
[ 20.840702] vfs_write+0xf0/0x278
[ 20.840942] __arm64_sys_write+0x84/0xf4
[ 20.841209] el0_svc_common+0xf4/0x1dc
[ 20.841471] el0_svc_handler+0x98/0xbc
[ 20.841713] el0_svc+0x8/0xc
[ 20.842057] Code: bad PC value
[ 20.842764] ---[ end trace a8835d7de79aaadf ]---
[ 20.843134] Kernel panic - not syncing: Fatal exception
[ 20.843515] SMP: stopping secondary CPUs
[ 20.844289] Kernel Offset: disabled
[ 20.844634] CPU features: 0x0,21806002
[ 20.844857] Memory Limit: none
[ 20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]---
Signed-off-by: Miles Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/tty_io.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -408,7 +408,7 @@ struct tty_driver *tty_find_polling_driv
mutex_lock(&tty_mutex);
/* Search through the tty devices to look for a match */
list_for_each_entry(p, &tty_drivers, tty_drivers) {
- if (strncmp(name, p->name, len) != 0)
+ if (!len || strncmp(name, p->name, len) != 0)
continue;
stp = str;
if (*stp == ',')
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Garry <[email protected]>
[ Upstream commit a27d938251ef40c43db81af16fc26b2cec181d4d ]
In commit c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ"), a
check was added for the UART driver being probed prior to the parent IRQ
controller.
Unfortunately this breaks certain boards which have no interrupt support,
like Huawei D03.
Indeed, the 8250 DT bindings state that interrupts should be supported -
not must.
To fix, switch from irq_of_parse_and_map() to of_irq_get(), which
does relay whether the IRQ host controller domain is not ready, i.e.
defer probe, instead of assuming it.
Fixes: c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ")
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Alexander Sverdlin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_of.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -58,7 +58,7 @@ static int of_platform_serial_setup(stru
struct resource resource;
struct device_node *np = ofdev->dev.of_node;
u32 clk, spd, prop;
- int ret;
+ int ret, irq;
memset(port, 0, sizeof *port);
@@ -143,21 +143,27 @@ static int of_platform_serial_setup(stru
if (ret >= 0)
port->line = ret;
- port->irq = irq_of_parse_and_map(np, 0);
- if (!port->irq) {
- ret = -EPROBE_DEFER;
- goto err_unprepare;
+ irq = of_irq_get(np, 0);
+ if (irq < 0) {
+ if (irq == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_unprepare;
+ }
+ /* IRQ support not mandatory */
+ irq = 0;
}
+ port->irq = irq;
+
info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst)) {
ret = PTR_ERR(info->rst);
- goto err_dispose;
+ goto err_unprepare;
}
ret = reset_control_deassert(info->rst);
if (ret)
- goto err_dispose;
+ goto err_unprepare;
port->type = type;
port->uartclk = clk;
@@ -184,8 +190,6 @@ static int of_platform_serial_setup(stru
port->handle_irq = fsl8250_handle_irq;
return 0;
-err_dispose:
- irq_dispose_mapping(port->irq);
err_unprepare:
clk_disable_unprepare(info->clk);
err_pmruntime:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phil Elwell <[email protected]>
[ Upstream commit 8344498721059754e09d30fe255a12dab8fb03ef ]
The SC16IS752 is a dual-channel device. The two channels are largely
independent, but the IRQ signals are wired together as an open-drain,
active low signal which will be driven low while either of the
channels requires attention, which can be for significant periods of
time until operations complete and the interrupt can be acknowledged.
In that respect it is should be treated as a true level-sensitive IRQ.
The kernel, however, needs to be able to exit interrupt context in
order to use I2C or SPI to access the device registers (which may
involve sleeping). Therefore the interrupt needs to be masked out or
paused in some way.
The usual way to manage sleeping from within an interrupt handler
is to use a threaded interrupt handler - a regular interrupt routine
does the minimum amount of work needed to triage the interrupt before
waking the interrupt service thread. If the threaded IRQ is marked as
IRQF_ONESHOT the kernel will automatically mask out the interrupt
until the thread runs to completion. The sc16is7xx driver used to
use a threaded IRQ, but a patch switched to using a kthread_worker
in order to set realtime priorities on the handler thread and for
other optimisations. The end result is non-threaded IRQ that
schedules some work then returns IRQ_HANDLED, making the kernel
think that all IRQ processing has completed.
The work-around to prevent a constant stream of interrupts is to
mark the interrupt as edge-sensitive rather than level-sensitive,
but interpreting an active-low source as a falling-edge source
requires care to prevent a total cessation of interrupts. Whereas
an edge-triggering source will generate a new edge for every interrupt
condition a level-triggering source will keep the signal at the
interrupting level until it no longer requires attention; in other
words, the host won't see another edge until all interrupt conditions
are cleared. It is therefore vital that the interrupt handler does not
exit with an outstanding interrupt condition, otherwise the kernel
will not receive another interrupt unless some other operation causes
the interrupt state on the device to be cleared.
The existing sc16is7xx driver has a very simple interrupt "thread"
(kthread_work job) that processes interrupts on each channel in turn
until there are no more. If both channels are active and the first
channel starts interrupting while the handler for the second channel
is running then it will not be detected and an IRQ stall ensues. This
could be handled easily if there was a shared IRQ status register, or
a convenient way to determine if the IRQ had been deasserted for any
length of time, but both appear to be lacking.
Avoid this problem (or at least make it much less likely to happen)
by reducing the granularity of per-channel interrupt processing
to one condition per iteration, only exiting the overall loop when
both channels are no longer interrupting.
Signed-off-by: Phil Elwell <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/sc16is7xx.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -657,7 +657,7 @@ static void sc16is7xx_handle_tx(struct u
uart_write_wakeup(port);
}
-static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
+static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
{
struct uart_port *port = &s->p[portno].port;
@@ -666,7 +666,7 @@ static void sc16is7xx_port_irq(struct sc
iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
if (iir & SC16IS7XX_IIR_NO_INT_BIT)
- break;
+ return false;
iir &= SC16IS7XX_IIR_ID_MASK;
@@ -688,16 +688,23 @@ static void sc16is7xx_port_irq(struct sc
port->line, iir);
break;
}
- } while (1);
+ } while (0);
+ return true;
}
static void sc16is7xx_ist(struct kthread_work *ws)
{
struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work);
- int i;
- for (i = 0; i < s->devtype->nr_uart; ++i)
- sc16is7xx_port_irq(s, i);
+ while (1) {
+ bool keep_polling = false;
+ int i;
+
+ for (i = 0; i < s->devtype->nr_uart; ++i)
+ keep_polling |= sc16is7xx_port_irq(s, i);
+ if (!keep_polling)
+ break;
+ }
}
static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marco Felsch <[email protected]>
[ Upstream commit bd24db04101f45a9c1d874fe21b0c7eab7bcadec ]
The driver ignored the width alignment which exists due to the UYVY
colorspace format. Fix the width alignment and make use of the the
provided v4l2 helper function to set the width, height and all
alignments in one.
Fixes: 963ddc63e20d ("[media] media: tvp5150: Add cropping support")
Signed-off-by: Marco Felsch <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/tvp5150.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -901,9 +901,6 @@ static int tvp5150_set_selection(struct
/* tvp5150 has some special limits */
rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
- rect.width = clamp_t(unsigned int, rect.width,
- TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
- TVP5150_H_MAX - rect.left);
rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
/* Calculate height based on current standard */
@@ -917,9 +914,16 @@ static int tvp5150_set_selection(struct
else
hmax = TVP5150_V_MAX_OTHERS;
- rect.height = clamp_t(unsigned int, rect.height,
+ /*
+ * alignments:
+ * - width = 2 due to UYVY colorspace
+ * - height, image = no special alignment
+ */
+ v4l_bound_align_image(&rect.width,
+ TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
+ TVP5150_H_MAX - rect.left, 1, &rect.height,
hmax - TVP5150_MAX_CROP_TOP - rect.top,
- hmax - rect.top);
+ hmax - rect.top, 0, 0);
tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Breno Leitao <[email protected]>
[ Upstream commit 693b31b2fc1636f0aa7af53136d3b49f6ad9ff39 ]
Test tm-tmspr might exit before all threads stop executing, because it just
waits for the very last thread to join before proceeding/exiting.
This patch makes sure that all threads that were created will join before
proceeding/exiting.
This patch also guarantees that the amount of threads being created is equal
to thread_num.
Signed-off-by: Breno Leitao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/powerpc/tm/tm-tmspr.c | 27 ++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
--- a/tools/testing/selftests/powerpc/tm/tm-tmspr.c
+++ b/tools/testing/selftests/powerpc/tm/tm-tmspr.c
@@ -98,7 +98,7 @@ void texasr(void *in)
int test_tmspr()
{
- pthread_t thread;
+ pthread_t *thread;
int thread_num;
unsigned long i;
@@ -107,21 +107,28 @@ int test_tmspr()
/* To cause some context switching */
thread_num = 10 * sysconf(_SC_NPROCESSORS_ONLN);
+ thread = malloc(thread_num * sizeof(pthread_t));
+ if (thread == NULL)
+ return EXIT_FAILURE;
+
/* Test TFIAR and TFHAR */
- for (i = 0 ; i < thread_num ; i += 2){
- if (pthread_create(&thread, NULL, (void*)tfiar_tfhar, (void *)i))
+ for (i = 0; i < thread_num; i += 2) {
+ if (pthread_create(&thread[i], NULL, (void *)tfiar_tfhar,
+ (void *)i))
return EXIT_FAILURE;
}
- if (pthread_join(thread, NULL) != 0)
- return EXIT_FAILURE;
-
/* Test TEXASR */
- for (i = 0 ; i < thread_num ; i++){
- if (pthread_create(&thread, NULL, (void*)texasr, (void *)i))
+ for (i = 1; i < thread_num; i += 2) {
+ if (pthread_create(&thread[i], NULL, (void *)texasr, (void *)i))
return EXIT_FAILURE;
}
- if (pthread_join(thread, NULL) != 0)
- return EXIT_FAILURE;
+
+ for (i = 0; i < thread_num; i++) {
+ if (pthread_join(thread[i], NULL) != 0)
+ return EXIT_FAILURE;
+ }
+
+ free(thread);
if (passed)
return 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kieran Bingham <[email protected]>
[ Upstream commit 2a3181d9cfd6d5aa48f8527708d0c32072072cef ]
The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The
limits on the RPF and WPF in this pipeline are 8190x8190.
Update the supported maximum sizes accordingly.
Signed-off-by: Kieran Bingham <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -516,12 +516,22 @@ int rcar_du_modeset_init(struct rcar_du_
dev->mode_config.min_width = 0;
dev->mode_config.min_height = 0;
- dev->mode_config.max_width = 4095;
- dev->mode_config.max_height = 2047;
dev->mode_config.normalize_zpos = true;
dev->mode_config.funcs = &rcar_du_mode_config_funcs;
dev->mode_config.helper_private = &rcar_du_mode_config_helper;
+ if (rcdu->info->gen < 3) {
+ dev->mode_config.max_width = 4095;
+ dev->mode_config.max_height = 2047;
+ } else {
+ /*
+ * The Gen3 DU uses the VSP1 for memory access, and is limited
+ * to frame sizes of 8190x8190.
+ */
+ dev->mode_config.max_width = 8190;
+ dev->mode_config.max_height = 8190;
+ }
+
rcdu->num_crtcs = hweight8(rcdu->info->channels_mask);
ret = rcar_du_properties_init(rcdu);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <[email protected]>
[ Upstream commit 1f447e51c0b9e8beeec0917ea5f51930f55e17c9 ]
Currently we have structrues comp (which is empty) and comp_info being
used to register and deregister the component. This mismatch in naming
occurred from a previous commit that renamed aim_info to comp. Fix this
to use consistent component naming in line with most/net, most/sound etc.
This fixes the message two issues, one with a null empty name when
loading the module:
[ 1485.269515] most_core: registered new core component (null)
and an Oops when removing the module:
[ 1485.277971] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 1485.278648] PGD 0 P4D 0
[ 1485.279253] Oops: 0002 [#2] SMP PTI
[ 1485.279847] CPU: 1 PID: 32629 Comm: modprobe Tainted: P D WC OE 4.18.0-8-generic #9
[ 1485.280442] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[ 1485.281040] RIP: 0010:most_deregister_component+0x3c/0x70 [most_core]
.. etc
Fixes: 1b10a0316e2d ("staging: most: video: remove aim designators")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/most/video/video.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/staging/most/video/video.c
+++ b/drivers/staging/most/video/video.c
@@ -530,7 +530,7 @@ static int comp_disconnect_channel(struc
return 0;
}
-static struct core_component comp_info = {
+static struct core_component comp = {
.name = "video",
.probe_channel = comp_probe_channel,
.disconnect_channel = comp_disconnect_channel,
@@ -565,7 +565,7 @@ static void __exit comp_exit(void)
}
spin_unlock_irq(&list_lock);
- most_deregister_component(&comp_info);
+ most_deregister_component(&comp);
BUG_ON(!list_empty(&video_devices));
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominique Martinet <[email protected]>
[ Upstream commit b4dc44b3cac9e8327e0655f530ed0c46f2e6214c ]
the 9p client code overwrites our glock.client_id pointing to a static
buffer by an allocated string holding the network provided value which
we do not care about; free and reset the value as appropriate.
This is almost identical to the leak in v9fs_file_getlock() fixed by
Al Viro in commit ce85dd58ad5a6 ("9p: we are leaking glock.client_id
in v9fs_file_getlock()"), which was returned as an error by a coverity
false positive -- while we are here attempt to make the code slightly
more robust to future change of the net/9p/client code and hopefully
more clear to coverity that there is no problem.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/9p/vfs_file.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -204,6 +204,14 @@ static int v9fs_file_do_lock(struct file
break;
if (schedule_timeout_interruptible(P9_LOCK_TIMEOUT) != 0)
break;
+ /*
+ * p9_client_lock_dotl overwrites flock.client_id with the
+ * server message, free and reuse the client name
+ */
+ if (flock.client_id != fid->clnt->name) {
+ kfree(flock.client_id);
+ flock.client_id = fid->clnt->name;
+ }
}
/* map 9p status to VFS status */
@@ -235,6 +243,8 @@ out_unlock:
locks_lock_file_wait(filp, fl);
fl->fl_type = fl_type;
}
+ if (flock.client_id != fid->clnt->name)
+ kfree(flock.client_id);
out:
return res;
}
@@ -269,7 +279,7 @@ static int v9fs_file_getlock(struct file
res = p9_client_getlock_dotl(fid, &glock);
if (res < 0)
- return res;
+ goto out;
/* map 9p lock type to os lock type */
switch (glock.type) {
case P9_LOCK_TYPE_RDLCK:
@@ -290,7 +300,9 @@ static int v9fs_file_getlock(struct file
fl->fl_end = glock.start + glock.length - 1;
fl->fl_pid = -glock.proc_id;
}
- kfree(glock.client_id);
+out:
+ if (glock.client_id != fid->clnt->name)
+ kfree(glock.client_id);
return res;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit a9ad01bc759df79b0012f43ee52164391e31cd96 ]
There are certain filesystem features which we support for reading but
not for writing. We properly refuse to mount such filesystems read-write
however for some features (such as read-only partitions), we don't check
for these features when remounting the filesystem from read-only to
read-write. Thus such filesystems could be remounted read-write leading
to strange behavior (most likely crashes).
Fix the problem by marking in superblock whether the filesystem has some
features that are supported in read-only mode and check this flag during
remount.
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/udf/super.c | 30 ++++++++++++++++--------------
fs/udf/udf_sb.h | 2 ++
2 files changed, 18 insertions(+), 14 deletions(-)
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -613,14 +613,11 @@ static int udf_remount_fs(struct super_b
struct udf_options uopt;
struct udf_sb_info *sbi = UDF_SB(sb);
int error = 0;
- struct logicalVolIntegrityDescImpUse *lvidiu = udf_sb_lvidiu(sb);
+
+ if (!(*flags & SB_RDONLY) && UDF_QUERY_FLAG(sb, UDF_FLAG_RW_INCOMPAT))
+ return -EACCES;
sync_filesystem(sb);
- if (lvidiu) {
- int write_rev = le16_to_cpu(lvidiu->minUDFWriteRev);
- if (write_rev > UDF_MAX_WRITE_VERSION && !(*flags & SB_RDONLY))
- return -EACCES;
- }
uopt.flags = sbi->s_flags;
uopt.uid = sbi->s_uid;
@@ -1257,6 +1254,7 @@ static int udf_load_partdesc(struct supe
ret = -EACCES;
goto out_bh;
}
+ UDF_SET_FLAG(sb, UDF_FLAG_RW_INCOMPAT);
ret = udf_load_vat(sb, i, type1_idx);
if (ret < 0)
goto out_bh;
@@ -2155,10 +2153,12 @@ static int udf_fill_super(struct super_b
UDF_MAX_READ_VERSION);
ret = -EINVAL;
goto error_out;
- } else if (minUDFWriteRev > UDF_MAX_WRITE_VERSION &&
- !sb_rdonly(sb)) {
- ret = -EACCES;
- goto error_out;
+ } else if (minUDFWriteRev > UDF_MAX_WRITE_VERSION) {
+ if (!sb_rdonly(sb)) {
+ ret = -EACCES;
+ goto error_out;
+ }
+ UDF_SET_FLAG(sb, UDF_FLAG_RW_INCOMPAT);
}
sbi->s_udfrev = minUDFWriteRev;
@@ -2176,10 +2176,12 @@ static int udf_fill_super(struct super_b
}
if (sbi->s_partmaps[sbi->s_partition].s_partition_flags &
- UDF_PART_FLAG_READ_ONLY &&
- !sb_rdonly(sb)) {
- ret = -EACCES;
- goto error_out;
+ UDF_PART_FLAG_READ_ONLY) {
+ if (!sb_rdonly(sb)) {
+ ret = -EACCES;
+ goto error_out;
+ }
+ UDF_SET_FLAG(sb, UDF_FLAG_RW_INCOMPAT);
}
if (udf_find_fileset(sb, &fileset, &rootdir)) {
--- a/fs/udf/udf_sb.h
+++ b/fs/udf/udf_sb.h
@@ -30,6 +30,8 @@
#define UDF_FLAG_LASTBLOCK_SET 16
#define UDF_FLAG_BLOCKSIZE_SET 17
#define UDF_FLAG_INCONSISTENT 18
+#define UDF_FLAG_RW_INCOMPAT 19 /* Set when we find RW incompatible
+ * feature */
#define UDF_PART_FLAG_UNALLOC_BITMAP 0x0001
#define UDF_PART_FLAG_UNALLOC_TABLE 0x0002
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sébastien Szymanski <[email protected]>
[ Upstream commit 31edaa6e7fd8143085a6a60c564447c07e76ed9f ]
Signals available on both i.MX6UL and i.MX6ULL should have the same name
because it is the case of all others common signals, it avoids to make
mistakes (use the wrong ones) and it makes writing device tree files
less complicated. For example:
imx6ul-imx6ull-board.dtsi:
...
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
>;
};
imx6ul-board.dts:
#include <imx6ul.dtsi>
#include <imx6ul-imx6ull-board.dtsi>
...
imx6ull-board.dts:
#include <imx6ull.dtsi>
#include <imx6ul-imx6ull-board.dtsi>
...
Without this patch, the imx6ull-board.dtb will use
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX instead of
MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX and the uart5 will be
misconfigured.
Signed-off-by: Sébastien Szymanski <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/imx6ull-pinfunc.h | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -14,14 +14,23 @@
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4
#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5
#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3
#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4
-#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
-#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
-#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
-#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0
@@ -55,7 +64,6 @@
#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hugues Fruchet <[email protected]>
[ Upstream commit fb98e29ff1ea5a8118265d11f0e03bc8608a49cb ]
fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame interval is unchanged").
Symptom was fuzzy image because of JPEG default format
not being changed according to new format selected, fix this.
Init sequence initialises format to YUV422 UYVY but
sensor->fmt initial value was set to JPEG, fix this.
Signed-off-by: Hugues Fruchet <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/ov5640.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -223,6 +223,7 @@ struct ov5640_dev {
int power_count;
struct v4l2_mbus_framefmt fmt;
+ bool pending_fmt_change;
const struct ov5640_mode_info *current_mode;
enum ov5640_frame_rate current_fr;
@@ -255,7 +256,7 @@ static inline struct v4l2_subdev *ctrl_t
* should be identified and removed to speed register load time
* over i2c.
*/
-
+/* YUV422 UYVY VGA@30fps */
static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
{0x3103, 0x11, 0, 0}, {0x3008, 0x82, 0, 5}, {0x3008, 0x42, 0, 0},
{0x3103, 0x03, 0, 0}, {0x3017, 0x00, 0, 0}, {0x3018, 0x00, 0, 0},
@@ -1968,9 +1969,12 @@ static int ov5640_set_fmt(struct v4l2_su
if (new_mode != sensor->current_mode) {
sensor->current_mode = new_mode;
- sensor->fmt = *mbus_fmt;
sensor->pending_mode_change = true;
}
+ if (mbus_fmt->code != sensor->fmt.code) {
+ sensor->fmt = *mbus_fmt;
+ sensor->pending_fmt_change = true;
+ }
out:
mutex_unlock(&sensor->lock);
return ret;
@@ -2544,10 +2548,13 @@ static int ov5640_s_stream(struct v4l2_s
ret = ov5640_set_mode(sensor, sensor->current_mode);
if (ret)
goto out;
+ }
+ if (enable && sensor->pending_fmt_change) {
ret = ov5640_set_framefmt(sensor, &sensor->fmt);
if (ret)
goto out;
+ sensor->pending_fmt_change = false;
}
if (sensor->ep.bus_type == V4L2_MBUS_CSI2)
@@ -2642,9 +2649,14 @@ static int ov5640_probe(struct i2c_clien
return -ENOMEM;
sensor->i2c_client = client;
+
+ /*
+ * default init sequence initialize sensor to
+ * YUV422 UYVY VGA@30fps
+ */
fmt = &sensor->fmt;
- fmt->code = ov5640_formats[0].code;
- fmt->colorspace = ov5640_formats[0].colorspace;
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
@@ -2656,7 +2668,6 @@ static int ov5640_probe(struct i2c_clien
sensor->current_fr = OV5640_30_FPS;
sensor->current_mode =
&ov5640_mode_data[OV5640_30_FPS][OV5640_MODE_VGA_640_480];
- sensor->pending_mode_change = true;
sensor->ae_target = 52;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
[ Upstream commit ff30e9e8509cb877dc7cbc776b36c70f5bdd290f ]
We accidentally left out the size of the amdgpu_bo_list struct. It
could lead to memory corruption on 32 bit systems. You'd have to
pick the absolute maximum and set "num_entries == 59652323" then size
would wrap to 16 bytes.
Fixes: 920990cb080a ("drm/amdgpu: allocate the bo_list array after the list")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Reviewed-by: Bas Nieuwenhuizen <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c
@@ -67,7 +67,8 @@ int amdgpu_bo_list_create(struct amdgpu_
unsigned i;
int r;
- if (num_entries > SIZE_MAX / sizeof(struct amdgpu_bo_list_entry))
+ if (num_entries > (SIZE_MAX - sizeof(struct amdgpu_bo_list))
+ / sizeof(struct amdgpu_bo_list_entry))
return -EINVAL;
size = sizeof(struct amdgpu_bo_list);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hugues Fruchet <[email protected]>
[ Upstream commit 985cdcb08a0488558d1005139596b64d73bee267 ]
Mode setting depends on last mode set, in particular
because of exposure calculation when downscale mode
change between subsampling and scaling.
At stream on the last mode was wrongly set to current mode,
so no change was detected and exposure calculation
was not made, fix this.
Signed-off-by: Hugues Fruchet <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Tested-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/ov5640.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -226,6 +226,7 @@ struct ov5640_dev {
bool pending_fmt_change;
const struct ov5640_mode_info *current_mode;
+ const struct ov5640_mode_info *last_mode;
enum ov5640_frame_rate current_fr;
struct v4l2_fract frame_interval;
@@ -1614,10 +1615,10 @@ static int ov5640_set_mode_direct(struct
return __v4l2_ctrl_s_ctrl(sensor->ctrls.auto_exp, exposure);
}
-static int ov5640_set_mode(struct ov5640_dev *sensor,
- const struct ov5640_mode_info *orig_mode)
+static int ov5640_set_mode(struct ov5640_dev *sensor)
{
const struct ov5640_mode_info *mode = sensor->current_mode;
+ const struct ov5640_mode_info *orig_mode = sensor->last_mode;
enum ov5640_downsize_mode dn_mode, orig_dn_mode;
s32 exposure;
int ret;
@@ -1674,6 +1675,7 @@ static int ov5640_set_mode(struct ov5640
return ret;
sensor->pending_mode_change = false;
+ sensor->last_mode = mode;
return 0;
}
@@ -1690,6 +1692,7 @@ static int ov5640_restore_mode(struct ov
ret = ov5640_load_regs(sensor, &ov5640_mode_init_data);
if (ret < 0)
return ret;
+ sensor->last_mode = &ov5640_mode_init_data;
ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
(ilog2(OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT) << 2) |
@@ -1698,7 +1701,7 @@ static int ov5640_restore_mode(struct ov
return ret;
/* now restore the last capture mode */
- ret = ov5640_set_mode(sensor, &ov5640_mode_init_data);
+ ret = ov5640_set_mode(sensor);
if (ret < 0)
return ret;
@@ -2545,7 +2548,7 @@ static int ov5640_s_stream(struct v4l2_s
if (sensor->streaming == !enable) {
if (enable && sensor->pending_mode_change) {
- ret = ov5640_set_mode(sensor, sensor->current_mode);
+ ret = ov5640_set_mode(sensor);
if (ret)
goto out;
}
@@ -2668,6 +2671,7 @@ static int ov5640_probe(struct i2c_clien
sensor->current_fr = OV5640_30_FPS;
sensor->current_mode =
&ov5640_mode_data[OV5640_30_FPS][OV5640_MODE_VGA_640_480];
+ sensor->last_mode = sensor->current_mode;
sensor->ae_target = 52;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amir Goldstein <[email protected]>
commit babf4770be0adc69e6d2de150f4040f175e24beb upstream.
We hit a BUG on kfree of an ERR_PTR()...
Reported-by: [email protected]
Fixes: 8b88a2e64036 ("ovl: verify upper root dir matches lower root dir")
Cc: <[email protected]> # v4.13
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/overlayfs/namei.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/overlayfs/namei.c
+++ b/fs/overlayfs/namei.c
@@ -422,8 +422,10 @@ int ovl_verify_set_fh(struct dentry *den
fh = ovl_encode_real_fh(real, is_upper);
err = PTR_ERR(fh);
- if (IS_ERR(fh))
+ if (IS_ERR(fh)) {
+ fh = NULL;
goto fail;
+ }
err = ovl_verify_fh(dentry, name, fh);
if (set && err == -ENODATA)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amir Goldstein <[email protected]>
commit 6cd078702f2f33cb6b19a682de3e9184112f1a46 upstream.
linking a non-copied-up file into a non-copied-up parent results in a
nested call to mutex_lock_interruptible(&oi->lock). Fix this by copying up
target parent before ovl_nlink_start(), same as done in ovl_rename().
~/unionmount-testsuite$ ./run --ov -s
~/unionmount-testsuite$ ln /mnt/a/foo100 /mnt/a/dir100/
WARNING: possible recursive locking detected
--------------------------------------------
ln/1545 is trying to acquire lock:
00000000bcce7c4c (&ovl_i_lock_key[depth]){+.+.}, at:
ovl_copy_up_start+0x28/0x7d
but task is already holding lock:
0000000026d73d5b (&ovl_i_lock_key[depth]){+.+.}, at:
ovl_nlink_start+0x3c/0xc1
[SzM: this seems to be a false positive, but doing the copy-up first is
harmless and removes the lockdep splat]
Reported-by: [email protected]
Fixes: 5f8415d6b87e ("ovl: persistent overlay inode nlink for...")
Cc: <[email protected]> # v4.13
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/overlayfs/dir.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -663,6 +663,10 @@ static int ovl_link(struct dentry *old,
if (err)
goto out_drop_write;
+ err = ovl_copy_up(new->d_parent);
+ if (err)
+ goto out_drop_write;
+
if (ovl_is_metacopy_dentry(old)) {
err = ovl_set_redirect(old, false);
if (err)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit 5e1275808630ea3b2c97c776f40e475017535f72 upstream.
Kaixuxia repors that it's possible to crash overlayfs by removing the
whiteout on the upper layer before creating a directory over it. This is a
reproducer:
mkdir lower upper work merge
touch lower/file
mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge
rm merge/file
ls -al merge/file
rm upper/file
ls -al merge/
mkdir merge/file
Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the
lookup of "upper" is positive and is a whiteout, and return ESTALE
otherwise.
Reported by: kaixuxia <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: e9be9d5e76e3 ("overlay filesystem")
Cc: <[email protected]> # v3.18
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/overlayfs/dir.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -463,6 +463,10 @@ static int ovl_create_over_whiteout(stru
if (IS_ERR(upper))
goto out_unlock;
+ err = -ESTALE;
+ if (d_is_negative(upper) || !IS_WHITEOUT(d_inode(upper)))
+ goto out_dput;
+
newdentry = ovl_create_temp(workdir, cattr);
err = PTR_ERR(newdentry);
if (IS_ERR(newdentry))
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit b86ac8fd4b2f6ec2f9ca9194c56eac12d620096f upstream.
This patch improves performance for 16G and above adapter by removing
additional call to process_response_queue().
[mkp: typo]
Cc: <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 2 --
drivers/scsi/qla2xxx/qla_iocb.c | 17 -----------------
2 files changed, 19 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -7142,7 +7142,6 @@ qla24xx_nvram_config(scsi_qla_host_t *vh
}
icb->firmware_options_2 &= cpu_to_le32(
~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
- vha->flags.process_response_queue = 0;
if (ha->zio_mode != QLA_ZIO_DISABLED) {
ha->zio_mode = QLA_ZIO_MODE_6;
@@ -7153,7 +7152,6 @@ qla24xx_nvram_config(scsi_qla_host_t *vh
icb->firmware_options_2 |= cpu_to_le32(
(uint32_t)ha->zio_mode);
icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
- vha->flags.process_response_queue = 1;
}
if (rval) {
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1526,12 +1526,6 @@ qla24xx_start_scsi(srb_t *sp)
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
- RD_REG_DWORD_RELAXED(&ha->iobase->isp24.hccr);
-
- /* Manage unprocessed RIO/ZIO commands in response queue. */
- if (vha->flags.process_response_queue &&
- rsp->ring_ptr->signature != RESPONSE_PROCESSED)
- qla24xx_process_response_queue(vha, rsp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
@@ -1725,12 +1719,6 @@ qla24xx_dif_start_scsi(srb_t *sp)
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
- RD_REG_DWORD_RELAXED(&ha->iobase->isp24.hccr);
-
- /* Manage unprocessed RIO/ZIO commands in response queue. */
- if (vha->flags.process_response_queue &&
- rsp->ring_ptr->signature != RESPONSE_PROCESSED)
- qla24xx_process_response_queue(vha, rsp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -1880,11 +1868,6 @@ qla2xxx_start_scsi_mq(srb_t *sp)
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
- /* Manage unprocessed RIO/ZIO commands in response queue. */
- if (vha->flags.process_response_queue &&
- rsp->ring_ptr->signature != RESPONSE_PROCESSED)
- qla24xx_process_response_queue(vha, rsp);
-
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return QLA_SUCCESS;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit 7c388f91ec1a59b0ed815b07b90536e2d57e1e1f upstream.
Remove stale debug trace.
Fixes: 1eb42f965ced ("qla2xxx: Make trace flags more readable")
Cc: [email protected] #4.10
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -718,10 +718,6 @@ static int tcm_qla2xxx_queue_status(stru
cmd->sg_cnt = 0;
cmd->offset = 0;
cmd->dma_data_direction = target_reverse_dma_direction(se_cmd);
- if (cmd->trc_flags & TRC_XMIT_STATUS) {
- pr_crit("Multiple calls for status = %p.\n", cmd);
- dump_stack();
- }
cmd->trc_flags |= TRC_XMIT_STATUS;
if (se_cmd->data_direction == DMA_FROM_DEVICE) {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit 8235f4b5aeba868739f6e12a51ad92689e3f78ef upstream.
Task abort can take 2 paths: 1) serial/synchronous abort where the calling
thread will put to sleep, wait for completion and free cmd resource. 2) async
abort where the cmd free will be free by the completion thread. For path 2,
driver is freeing the SRB too early.
Fixes: f6145e86d21f ("scsi: qla2xxx: Fix race between switch cmd completion and timeout")
Cc: [email protected] # 4.19
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1788,6 +1788,8 @@ qla24xx_async_abort_cmd(srb_t *cmd_sp, b
wait_for_completion(&abt_iocb->u.abt.comp);
rval = abt_iocb->u.abt.comp_status == CS_COMPLETE ?
QLA_SUCCESS : QLA_FUNCTION_FAILED;
+ } else {
+ goto done;
}
done_free_sp:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit 1e4ac5d6fe0a4af17e4b6251b884485832bf75a3 upstream.
If chip unable to fully initialize, use full shutdown sequence to clear out
any stale FW state.
Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: [email protected] #4.10
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -6684,7 +6684,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
* The next call disables the board
* completely.
*/
- ha->isp_ops->reset_adapter(vha);
+ qla2x00_abort_isp_cleanup(vha);
vha->flags.online = 0;
clear_bit(ISP_ABORT_RETRY,
&vha->dpc_flags);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit 56d942de59ebfa2e970a6cd33299d1984710b6c0 upstream.
Reject bsg request if chip is down. This prevent erroneous timeout.
Fixes: d051a5aa1c23 ("[SCSI] qla2xxx: Add an "is reset active" helper.")
Cc: [email protected] # 4.10
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_bsg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -2487,7 +2487,7 @@ qla24xx_bsg_request(struct bsg_job *bsg_
vha = shost_priv(host);
}
- if (qla2x00_reset_active(vha)) {
+ if (qla2x00_chip_is_down(vha)) {
ql_dbg(ql_dbg_user, vha, 0x709f,
"BSG: ISP abort active/needed -- cmd=%d.\n",
bsg_request->msgcode);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
[ Upstream commit 37e9c674e7e6f445e12cb1151017bd4bacdd1e2d ]
This patch fixes the following warnings (obtained with make W=1).
arch/powerpc/mm/slice.c: In function 'slice_range_to_mask':
arch/powerpc/mm/slice.c:73:12: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (start < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c:81:20: error: comparison is always false due to limited range of data type [-Werror=type-limits]
if ((start + len) > SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c: In function 'slice_mask_for_free':
arch/powerpc/mm/slice.c:136:17: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (high_limit <= SLICE_LOW_TOP)
^
arch/powerpc/mm/slice.c: In function 'slice_check_range_fits':
arch/powerpc/mm/slice.c:185:12: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (start < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c:195:39: error: comparison is always false due to limited range of data type [-Werror=type-limits]
if (SLICE_NUM_HIGH && ((start + len) > SLICE_LOW_TOP)) {
^
arch/powerpc/mm/slice.c: In function 'slice_scan_available':
arch/powerpc/mm/slice.c:306:11: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (addr < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c: In function 'get_slice_psize':
arch/powerpc/mm/slice.c:709:11: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (addr < SLICE_LOW_TOP) {
^
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/slice.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -61,6 +61,13 @@ static void slice_print_mask(const char
#endif
+static inline bool slice_addr_is_low(unsigned long addr)
+{
+ u64 tmp = (u64)addr;
+
+ return tmp < SLICE_LOW_TOP;
+}
+
static void slice_range_to_mask(unsigned long start, unsigned long len,
struct slice_mask *ret)
{
@@ -70,7 +77,7 @@ static void slice_range_to_mask(unsigned
if (SLICE_NUM_HIGH)
bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
- if (start < SLICE_LOW_TOP) {
+ if (slice_addr_is_low(start)) {
unsigned long mend = min(end,
(unsigned long)(SLICE_LOW_TOP - 1));
@@ -78,7 +85,7 @@ static void slice_range_to_mask(unsigned
- (1u << GET_LOW_SLICE_INDEX(start));
}
- if ((start + len) > SLICE_LOW_TOP) {
+ if (SLICE_NUM_HIGH && !slice_addr_is_low(end)) {
unsigned long start_index = GET_HIGH_SLICE_INDEX(start);
unsigned long align_end = ALIGN(end, (1UL << SLICE_HIGH_SHIFT));
unsigned long count = GET_HIGH_SLICE_INDEX(align_end) - start_index;
@@ -133,7 +140,7 @@ static void slice_mask_for_free(struct m
if (!slice_low_has_vma(mm, i))
ret->low_slices |= 1u << i;
- if (high_limit <= SLICE_LOW_TOP)
+ if (slice_addr_is_low(high_limit - 1))
return;
for (i = 0; i < GET_HIGH_SLICE_INDEX(high_limit); i++)
@@ -182,7 +189,7 @@ static bool slice_check_range_fits(struc
unsigned long end = start + len - 1;
u64 low_slices = 0;
- if (start < SLICE_LOW_TOP) {
+ if (slice_addr_is_low(start)) {
unsigned long mend = min(end,
(unsigned long)(SLICE_LOW_TOP - 1));
@@ -192,7 +199,7 @@ static bool slice_check_range_fits(struc
if ((low_slices & available->low_slices) != low_slices)
return false;
- if (SLICE_NUM_HIGH && ((start + len) > SLICE_LOW_TOP)) {
+ if (SLICE_NUM_HIGH && !slice_addr_is_low(end)) {
unsigned long start_index = GET_HIGH_SLICE_INDEX(start);
unsigned long align_end = ALIGN(end, (1UL << SLICE_HIGH_SHIFT));
unsigned long count = GET_HIGH_SLICE_INDEX(align_end) - start_index;
@@ -303,7 +310,7 @@ static bool slice_scan_available(unsigne
int end, unsigned long *boundary_addr)
{
unsigned long slice;
- if (addr < SLICE_LOW_TOP) {
+ if (slice_addr_is_low(addr)) {
slice = GET_LOW_SLICE_INDEX(addr);
*boundary_addr = (slice + end) << SLICE_LOW_SHIFT;
return !!(available->low_slices & (1u << slice));
@@ -706,7 +713,7 @@ unsigned int get_slice_psize(struct mm_s
VM_BUG_ON(radix_enabled());
- if (addr < SLICE_LOW_TOP) {
+ if (slice_addr_is_low(addr)) {
psizes = mm->context.low_slices_psize;
index = GET_LOW_SLICE_INDEX(addr);
} else {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Su Sung Chung <[email protected]>
[ Upstream commit 43c3ff27a47d83d153c4adc088243ba594582bf5 ]
[Why]
A loop inside of build_evenly_distributed_points function that traverse through
the array of points become an infinite loop when m_GammaUpdates does not
get assigned to any value.
[How]
In DMColor, clear m_gammaIsValid bit just before writting all Zeromem for
m_GammaUpdates, to prevent calling build_evenly_distributed_points
before m_GammaUpdates gets assigned to some value.
Signed-off-by: Su Sung Chung <[email protected]>
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Bhawanpreet Lakha <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/modules/color/color_gamma.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c
+++ b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c
@@ -1069,10 +1069,14 @@ static void build_evenly_distributed_poi
struct dividers dividers)
{
struct gamma_pixel *p = points;
- struct gamma_pixel *p_last = p + numberof_points - 1;
+ struct gamma_pixel *p_last;
uint32_t i = 0;
+ // This function should not gets called with 0 as a parameter
+ ASSERT(numberof_points > 0);
+ p_last = p + numberof_points - 1;
+
do {
struct fixed31_32 value = dc_fixpt_from_fraction(i,
numberof_points - 1);
@@ -1083,7 +1087,7 @@ static void build_evenly_distributed_poi
++p;
++i;
- } while (i != numberof_points);
+ } while (i < numberof_points);
p->r = dc_fixpt_div(p_last->r, dividers.divider1);
p->g = dc_fixpt_div(p_last->g, dividers.divider1);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sam Bobroff <[email protected]>
[ Upstream commit f9bc28aedfb5bbd572d2d365f3095c1becd7209b ]
If an error occurs during an unplug operation, it's possible for
eeh_dump_dev_log() to be called when edev->pdn is null, which
currently leads to dereferencing a null pointer.
Handle this by skipping the error log for those devices.
Signed-off-by: Sam Bobroff <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/eeh.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -169,6 +169,11 @@ static size_t eeh_dump_dev_log(struct ee
int n = 0, l = 0;
char buffer[128];
+ if (!pdn) {
+ pr_warn("EEH: Note: No error log for absent device.\n");
+ return 0;
+ }
+
n += scnprintf(buf+n, len-n, "%04x:%02x:%02x.%01x\n",
pdn->phb->global_number, pdn->busno,
PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit db186382af21e926e90df19499475f2552192b77 upstream.
This patch fixes issue when remoteport registers itself as both FCP and
FC-NVMe with the switch, driver will pick FC-NVMe personality as default when
scanning for targets.
Driver was using comaprative operator instead of bitwise operator to check for
fc4_type for both FCP and FC-NVME.
Fixes: 2b5b96473efc ("scsi: qla2xxx: Fix FC-NVMe LUN discovery")
Cc: <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_os.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4808,10 +4808,10 @@ void qla24xx_create_new_sess(struct scsi
fcport->d_id = e->u.new_sess.id;
fcport->flags |= FCF_FABRIC_DEVICE;
fcport->fw_login_state = DSC_LS_PLOGI_PEND;
- if (e->u.new_sess.fc4_type == FS_FC4TYPE_FCP)
+ if (e->u.new_sess.fc4_type & FS_FC4TYPE_FCP)
fcport->fc4_type = FC4_TYPE_FCP_SCSI;
- if (e->u.new_sess.fc4_type == FS_FC4TYPE_NVME) {
+ if (e->u.new_sess.fc4_type & FS_FC4TYPE_NVME) {
fcport->fc4_type = FC4_TYPE_OTHER;
fcport->fc4f_nvme = FC4_TYPE_NVME;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dengcheng Zhu <[email protected]>
[ Upstream commit dc57aaf95a516f70e2d527d8287a0332c481a226 ]
After changing CPU online status, it will not be sent any IPIs such as in
__flush_cache_all() on software coherency systems. Do this before disabling
local IRQ.
Signed-off-by: Dengcheng Zhu <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/20571/
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/crash.c | 3 +++
arch/mips/kernel/machine_kexec.c | 3 +++
2 files changed, 6 insertions(+)
--- a/arch/mips/kernel/crash.c
+++ b/arch/mips/kernel/crash.c
@@ -36,6 +36,9 @@ static void crash_shutdown_secondary(voi
if (!cpu_online(cpu))
return;
+ /* We won't be sent IPIs any more. */
+ set_cpu_online(cpu, false);
+
local_irq_disable();
if (!cpumask_test_cpu(cpu, &cpus_in_crash))
crash_save_cpu(regs, cpu);
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -118,6 +118,9 @@ machine_kexec(struct kimage *image)
*ptr = (unsigned long) phys_to_virt(*ptr);
}
+ /* Mark offline BEFORE disabling local irq. */
+ set_cpu_online(smp_processor_id(), false);
+
/*
* we do not want to be bothered.
*/
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin <[email protected]>
[ Upstream commit b851ba02a6f3075f0f99c60c4bc30a4af80cf428 ]
The recent module relocation overflow crash demonstrated that we
have no range checking on REL32 relative relocations. This patch
implements a basic check, the same kernel that previously oopsed
and rebooted now continues with some of these errors when loading
the module:
module_64: x_tables: REL32 527703503449812 out of range!
Possibly other relocations (ADDR32, REL16, TOC16, etc.) should also have
overflow checks.
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/module_64.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -680,7 +680,14 @@ int apply_relocate_add(Elf64_Shdr *sechd
case R_PPC64_REL32:
/* 32 bits relative (used by relative exception tables) */
- *(u32 *)location = value - (unsigned long)location;
+ /* Convert value to relative */
+ value -= (unsigned long)location;
+ if (value + 0x80000000 > 0xffffffff) {
+ pr_err("%s: REL32 %li out of range!\n",
+ me->name, (long int)value);
+ return -ENOEXEC;
+ }
+ *(u32 *)location = value;
break;
case R_PPC64_TOCSAVE:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Grodzovsky <[email protected]>
[ Upstream commit d8de8260a45aae8f74af77eae9a162bdc0ed48d2 ]
After GPU reset amdgpu_vm_clear_bo triggers VM flush
but job->vm_pd_addr is not set causing SDMA TO.
v2:
Per advise by Christian König avoid flushing VM for jobs where
job->vm_pd_addr wasn't explicitly set.
v3:
Shortcut vm_flush_needed early.
Fixes cbd5285 drm/amdgpu: move setting the GART addr into TTM.
Signed-off-by: Andrey Grodzovsky <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
@@ -66,6 +66,7 @@ int amdgpu_job_alloc(struct amdgpu_devic
amdgpu_sync_create(&(*job)->sync);
amdgpu_sync_create(&(*job)->sched_sync);
(*job)->vram_lost_counter = atomic_read(&adev->vram_lost_counter);
+ (*job)->vm_pd_addr = AMDGPU_BO_INVALID_OFFSET;
return 0;
}
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -714,7 +714,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *
}
gds_switch_needed &= !!ring->funcs->emit_gds_switch;
- vm_flush_needed &= !!ring->funcs->emit_vm_flush;
+ vm_flush_needed &= !!ring->funcs->emit_vm_flush &&
+ job->vm_pd_addr != AMDGPU_BO_INVALID_OFFSET;
pasid_mapping_needed &= adev->gmc.gmc_funcs->emit_pasid_mapping &&
ring->funcs->emit_wreg;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joel Stanley <[email protected]>
[ Upstream commit ee9d21b3b3583712029a0db65a4b7c081d08d3b3 ]
When building with clang crt0's _zimage_start is not marked weak, which
breaks the build when linking the kernel image:
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 g .text 0000000000000000 _zimage_start
ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
(.text+0x58): multiple definition of '_zimage_start';
arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here
Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:
This directive sets the weak attribute on the comma separated list of
symbol names. If the symbols do not already exist, they will be
created.
So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].
Changing it to be after the declaration fixes building with Clang, and
still works with GCC.
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 w .text 0000000000000000 _zimage_start
Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921
[1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY
Signed-off-by: Joel Stanley <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/boot/crt0.S | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -47,8 +47,10 @@ p_end: .long _end
p_pstack: .long _platform_stack_top
#endif
- .weak _zimage_start
.globl _zimage_start
+ /* Clang appears to require the .weak directive to be after the symbol
+ * is defined. See https://bugs.llvm.org/show_bug.cgi?id=38921 */
+ .weak _zimage_start
_zimage_start:
.globl _zimage_start_lib
_zimage_start_lib:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Garry <[email protected]>
[ Upstream commit 331d880b35a76b5de0eec8cbcecbf615d758a5f9 ]
In hibmc_drm_fb_create(), when the call to hibmc_framebuffer_init() fails
with error, do not store the error code in the HiBMC device frame-buffer
pointer, as this will be later checked for non-zero value in
hibmc_fbdev_destroy() when our intention is to check for a valid function
pointer.
This fixes the following crash:
[ 9.699791] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a
[ 9.708672] Mem abort info:
[ 9.711489] ESR = 0x96000004
[ 9.714570] Exception class = DABT (current EL), IL = 32 bits
[ 9.720551] SET = 0, FnV = 0
[ 9.723631] EA = 0, S1PTW = 0
[ 9.726799] Data abort info:
[ 9.729702] ISV = 0, ISS = 0x00000004
[ 9.733573] CM = 0, WnR = 0
[ 9.736566] [000000000000001a] user address but active_mm is swapper
[ 9.742987] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 9.748614] Modules linked in:
[ 9.751694] CPU: 16 PID: 293 Comm: kworker/16:1 Tainted: G W 4.19.0-rc4-next-20180920-00001-g9b0012c #322
[ 9.762681] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
[ 9.771915] Workqueue: events work_for_cpu_fn
[ 9.776312] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 9.781150] pc : drm_mode_object_put+0x0/0x20
[ 9.785547] lr : hibmc_fbdev_fini+0x40/0x58
[ 9.789767] sp : ffff00000af1bcf0
[ 9.793108] x29: ffff00000af1bcf0 x28: 0000000000000000
[ 9.798473] x27: 0000000000000000 x26: ffff000008f66630
[ 9.803838] x25: 0000000000000000 x24: ffff0000095abb98
[ 9.809203] x23: ffff8017db92fe00 x22: ffff8017d2b13000
[ 9.814568] x21: ffffffffffffffea x20: ffff8017d2f80018
[ 9.819933] x19: ffff8017d28a0018 x18: ffffffffffffffff
[ 9.825297] x17: 0000000000000000 x16: 0000000000000000
[ 9.830662] x15: ffff0000092296c8 x14: ffff00008939970f
[ 9.836026] x13: ffff00000939971d x12: ffff000009229940
[ 9.841391] x11: ffff0000085f8fc0 x10: ffff00000af1b9a0
[ 9.846756] x9 : 000000000000000d x8 : 6620657a696c6169
[ 9.852121] x7 : ffff8017d3340580 x6 : ffff8017d4168000
[ 9.857486] x5 : 0000000000000000 x4 : ffff8017db92fb20
[ 9.862850] x3 : 0000000000002690 x2 : ffff8017d3340480
[ 9.868214] x1 : 0000000000000028 x0 : 0000000000000002
[ 9.873580] Process kworker/16:1 (pid: 293, stack limit = 0x(____ptrval____))
[ 9.880788] Call trace:
[ 9.883252] drm_mode_object_put+0x0/0x20
[ 9.887297] hibmc_unload+0x1c/0x80
[ 9.890815] hibmc_pci_probe+0x170/0x3c8
[ 9.894773] local_pci_probe+0x3c/0xb0
[ 9.898555] work_for_cpu_fn+0x18/0x28
[ 9.902337] process_one_work+0x1e0/0x318
[ 9.906382] worker_thread+0x228/0x450
[ 9.910164] kthread+0x128/0x130
[ 9.913418] ret_from_fork+0x10/0x18
[ 9.917024] Code: a94153f3 a8c27bfd d65f03c0 d503201f (f9400c01)
[ 9.923180] ---[ end trace 2695ffa0af5be375 ]---
Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Xinliang Liu <[email protected]>
Signed-off-by: Xinliang Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c
@@ -122,6 +122,7 @@ static int hibmc_drm_fb_create(struct dr
hi_fbdev->fb = hibmc_framebuffer_init(priv->dev, &mode_cmd, gobj);
if (IS_ERR(hi_fbdev->fb)) {
ret = PTR_ERR(hi_fbdev->fb);
+ hi_fbdev->fb = NULL;
DRM_ERROR("failed to initialize framebuffer: %d\n", ret);
goto out_release_fbi;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominique Martinet <[email protected]>
[ Upstream commit 62e3941776fea8678bb8120607039410b1b61a65 ]
p9stat_free is more of a cleanup function than a 'free' function as it
only frees the content of the struct; there are chances of use-after-free
if it is improperly used (e.g. p9stat_free called twice as it used to be
possible to)
Clearing dangling pointers makes the function idempotent and safer to use.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Reported-by: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/protocol.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -46,10 +46,15 @@ p9pdu_writef(struct p9_fcall *pdu, int p
void p9stat_free(struct p9_wstat *stbuf)
{
kfree(stbuf->name);
+ stbuf->name = NULL;
kfree(stbuf->uid);
+ stbuf->uid = NULL;
kfree(stbuf->gid);
+ stbuf->gid = NULL;
kfree(stbuf->muid);
+ stbuf->muid = NULL;
kfree(stbuf->extension);
+ stbuf->extension = NULL;
}
EXPORT_SYMBOL(p9stat_free);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d06f8a2f1befb5a3d0aa660ab1c05e9b744456ea ]
Masking/unmasking the CPU UART irq in CP0_Status (and redirecting it to
other CPUs) may cause interrupts be lost, especially in multi-package
machines (Package-0's UART irq cannot be delivered to others). So make
mask_loongson_irq() and unmask_loongson_irq() be no-ops.
The original problem (UART IRQ may deliver to any core) is also because
of masking/unmasking the CPU UART irq in CP0_Status. So it is safe to
remove all of the stuff.
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/20433/
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: Fuxin Zhang <[email protected]>
Cc: Zhangjin Wu <[email protected]>
Cc: Huacai Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/loongson64/loongson-3/irq.c | 43 ++-------------------------
1 file changed, 3 insertions(+), 40 deletions(-)
diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c
index cbeb20f9fc95..2e115ab66a00 100644
--- a/arch/mips/loongson64/loongson-3/irq.c
+++ b/arch/mips/loongson64/loongson-3/irq.c
@@ -102,45 +102,8 @@ static struct irqaction cascade_irqaction = {
.name = "cascade",
};
-static inline void mask_loongson_irq(struct irq_data *d)
-{
- clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
- irq_disable_hazard();
-
- /* Workaround: UART IRQ may deliver to any core */
- if (d->irq == LOONGSON_UART_IRQ) {
- int cpu = smp_processor_id();
- int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
- int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
- u64 intenclr_addr = smp_group[node_id] |
- (u64)(&LOONGSON_INT_ROUTER_INTENCLR);
- u64 introuter_lpc_addr = smp_group[node_id] |
- (u64)(&LOONGSON_INT_ROUTER_LPC);
-
- *(volatile u32 *)intenclr_addr = 1 << 10;
- *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
- }
-}
-
-static inline void unmask_loongson_irq(struct irq_data *d)
-{
- /* Workaround: UART IRQ may deliver to any core */
- if (d->irq == LOONGSON_UART_IRQ) {
- int cpu = smp_processor_id();
- int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
- int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
- u64 intenset_addr = smp_group[node_id] |
- (u64)(&LOONGSON_INT_ROUTER_INTENSET);
- u64 introuter_lpc_addr = smp_group[node_id] |
- (u64)(&LOONGSON_INT_ROUTER_LPC);
-
- *(volatile u32 *)intenset_addr = 1 << 10;
- *(volatile u8 *)introuter_lpc_addr = 0x10 + (1<<core_id);
- }
-
- set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
- irq_enable_hazard();
-}
+static inline void mask_loongson_irq(struct irq_data *d) { }
+static inline void unmask_loongson_irq(struct irq_data *d) { }
/* For MIPS IRQs which shared by all cores */
static struct irq_chip loongson_irq_chip = {
@@ -183,7 +146,7 @@ void __init mach_init_irq(void)
chip->irq_set_affinity = plat_set_irq_affinity;
irq_set_chip_and_handler(LOONGSON_UART_IRQ,
- &loongson_irq_chip, handle_level_irq);
+ &loongson_irq_chip, handle_percpu_irq);
/* setup HT1 irq */
setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
--
2.17.1
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Young_X <[email protected]>
commit e4f3aa2e1e67bb48dfbaaf1cad59013d5a5bc276 upstream.
There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().
This issue is similar to CVE-2018-16658 and CVE-2018-10940.
Signed-off-by: Young_X <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cdrom/cdrom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2445,7 +2445,7 @@ static int cdrom_ioctl_select_disc(struc
return -ENOSYS;
if (arg != CDSL_CURRENT && arg != CDSL_NONE) {
- if ((int)arg >= cdi->capacity)
+ if (arg >= cdi->capacity)
return -EINVAL;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit 4119ba211bc4f1bf638f41e50b7a0f329f58aa16 upstream.
This section collects all source .note.* sections together in the
vmlinux image. Without it .note.Linux section may be placed at address
0, while the rest of the kernel is at its normal address, resulting in a
huge vmlinux.bin image that may not be linked into the xtensa Image.elf.
Cc: [email protected]
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/boot/Makefile | 2 +-
arch/xtensa/kernel/vmlinux.lds.S | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
--- a/arch/xtensa/boot/Makefile
+++ b/arch/xtensa/boot/Makefile
@@ -33,7 +33,7 @@ uImage: $(obj)/uImage
boot-elf boot-redboot: $(addprefix $(obj)/,$(subdir-y))
$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
-OBJCOPYFLAGS = --strip-all -R .comment -R .note.gnu.build-id -O binary
+OBJCOPYFLAGS = --strip-all -R .comment -R .notes -O binary
vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -131,6 +131,7 @@ SECTIONS
.fixup : { *(.fixup) }
EXCEPTION_TABLE(16)
+ NOTES
/* Data section */
_sdata = .;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit 0773495b1f5f1c5e23551843f87b5ff37e7af8f7 upstream.
Xtensa ABI requires stack alignment to be at least 16. In noMMU
configuration ARCH_SLAB_MINALIGN is used to align stack. Make it at
least 16.
This fixes the following runtime error in noMMU configuration, caused by
interaction between insufficiently aligned stack and alloca function,
that results in corruption of on-stack variable in the libc function
glob:
Caught unhandled exception in 'sh' (pid = 47, pc = 0x02d05d65)
- should not happen
EXCCAUSE is 15
Cc: [email protected]
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/include/asm/processor.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -23,7 +23,11 @@
# error Linux requires the Xtensa Windowed Registers Option.
#endif
-#define ARCH_SLAB_MINALIGN XCHAL_DATA_WIDTH
+/* Xtensa ABI requires stack alignment to be at least 16 */
+
+#define STACK_ALIGN (XCHAL_DATA_WIDTH > 16 ? XCHAL_DATA_WIDTH : 16)
+
+#define ARCH_SLAB_MINALIGN STACK_ALIGN
/*
* User space process size: 1 GB.
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ronald Wahl <[email protected]>
commit 0f5cb0e6225cae2f029944cb8c74617aab6ddd49 upstream.
Commit a982e45dc150 ("clk: at91: PLL recalc_rate() now using cached MUL
and DIV values") removed a check that prevents a division by zero. This
now causes a stacktrace when booting the kernel on a at91 platform if
the PLL DIV register contains zero. This commit reintroduces this check.
Fixes: a982e45dc150 ("clk: at91: PLL recalc_rate() now using cached...")
Cc: <[email protected]>
Signed-off-by: Ronald Wahl <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/at91/clk-pll.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -133,6 +133,9 @@ static unsigned long clk_pll_recalc_rate
{
struct clk_pll *pll = to_clk_pll(hw);
+ if (!pll->div || !pll->mul)
+ return 0;
+
return (parent_rate / pll->div) * (pll->mul + 1);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yoshihiro Shimoda <[email protected]>
commit 641a41dbba217ee5bd26abe6be77f8cead9cd00e upstream.
This patch fixes an issue that the sci_remove() could not remove
dev_attr_rx_fifo_timeout because uart_remove_one_port() set
the port->port.type to PORT_UNKNOWN.
Reported-by: Hiromitsu Yamasaki <[email protected]>
Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs")
Cc: <[email protected]> # v4.11+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Ulrich Hecht <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/sh-sci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3102,6 +3102,7 @@ static struct uart_driver sci_uart_drive
static int sci_remove(struct platform_device *dev)
{
struct sci_port *port = platform_get_drvdata(dev);
+ unsigned int type = port->port.type; /* uart_remove_... clears it */
sci_ports_in_use &= ~BIT(port->port.line);
uart_remove_one_port(&sci_uart_driver, &port->port);
@@ -3112,8 +3113,7 @@ static int sci_remove(struct platform_de
sysfs_remove_file(&dev->dev.kobj,
&dev_attr_rx_fifo_trigger.attr);
}
- if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB ||
- port->port.type == PORT_HSCIF) {
+ if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF) {
sysfs_remove_file(&dev->dev.kobj,
&dev_attr_rx_fifo_timeout.attr);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit 40dc948f234b73497c3278875eb08a01d5854d3f upstream.
The bootloader may pass physical address of the boot parameters structure
to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in
the arch/xtensa/kernel/head.S is supposed to map that physical address to
the virtual address in the configured virtual memory layout.
This code haven't been updated when additional 256+256 and 512+512
memory layouts were introduced and it may produce wrong addresses when
used with these layouts.
Cc: [email protected]
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/kernel/head.S | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -88,9 +88,12 @@ _SetupMMU:
initialize_mmu
#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
rsr a2, excsave1
- movi a3, 0x08000000
+ movi a3, XCHAL_KSEG_PADDR
+ bltu a2, a3, 1f
+ sub a2, a2, a3
+ movi a3, XCHAL_KSEG_SIZE
bgeu a2, a3, 1f
- movi a3, 0xd0000000
+ movi a3, XCHAL_KSEG_CACHED_VADDR
add a2, a2, a3
wsr a2, excsave1
1:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Enric Balletbo i Serra <[email protected]>
commit 665636b2940d0897c4130253467f5e8c42eea392 upstream.
Fixes the signedness bug returning '(-22)' on the return type by removing the
sanity checker in rockchip_ddrclk_get_parent(). The function should return
and unsigned value only and it's safe to remove the sanity checker as the
core functions that call get_parent like clk_core_get_parent_by_index already
ensures the validity of the clk index returned (index >= core->num_parents).
Fixes: a4f182bf81f18 ("clk: rockchip: add new clock-type for the ddrclk")
Cc: [email protected]
Signed-off-by: Enric Balletbo i Serra <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/rockchip/clk-ddr.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/clk/rockchip/clk-ddr.c
+++ b/drivers/clk/rockchip/clk-ddr.c
@@ -80,16 +80,12 @@ static long rockchip_ddrclk_sip_round_ra
static u8 rockchip_ddrclk_get_parent(struct clk_hw *hw)
{
struct rockchip_ddrclk *ddrclk = to_rockchip_ddrclk_hw(hw);
- int num_parents = clk_hw_get_num_parents(hw);
u32 val;
val = clk_readl(ddrclk->reg_base +
ddrclk->mux_offset) >> ddrclk->mux_shift;
val &= GENMASK(ddrclk->mux_width - 1, 0);
- if (val >= num_parents)
- return -EINVAL;
-
return val;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lucas Stach <[email protected]>
[ Upstream commit 1f32061e843205f6fe8404d5100d5adcec334e75 ]
On a decoder instance, after the profile has been parsed from the stream
__v4l2_ctrl_s_ctrl() is called to notify userspace about changes in the
read-only profile control. This ends up calling back into the CODA driver
where a missing check on the s_ctrl caused the profile information that has
just been parsed from the stream to be overwritten with the default
baseline profile.
Later on the driver fails to enable frame reordering, based on the wrong
profile information.
Fixes: 347de126d1da (media: coda: add read-only h.264 decoder
profile/level controls)
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/coda/coda-common.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -1804,7 +1804,8 @@ static int coda_s_ctrl(struct v4l2_ctrl
break;
case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
/* TODO: switch between baseline and constrained baseline */
- ctx->params.h264_profile_idc = 66;
+ if (ctx->inst_type == CODA_INST_ENCODER)
+ ctx->params.h264_profile_idc = 66;
break;
case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
/* nothing to do, this is set by the encoder */
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Osipenko <[email protected]>
commit 3c587768271e9c20276522025729e4ebca51583b upstream.
This patch fixes use-after-free that was detected by KASAN. The bug is
triggered on a CPUFreq driver module unload by freeing 'cdev' on device
unregister and then using the freed structure during of the cdev's sysfs
data destruction. The solution is to unregister the sysfs at first, then
destroy sysfs data and finally release the cooling device.
Cc: <[email protected]> # v4.17+
Fixes: 8ea229511e06 ("thermal: Add cooling device's statistics in sysfs")
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Acked-by: Eduardo Valentin <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/thermal_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1102,8 +1102,9 @@ void thermal_cooling_device_unregister(s
mutex_unlock(&thermal_list_lock);
ida_simple_remove(&thermal_cdev_ida, cdev->id);
- device_unregister(&cdev->device);
+ device_del(&cdev->device);
thermal_cooling_device_destroy_sysfs(cdev);
+ put_device(&cdev->device);
}
EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 3fa58dcab50a0aa16817f16a8d38aee869eb3fb9 upstream.
When the platform BIOS is unable to report all the media error records
it requires the OS to restart the scrub at a prescribed location. The
driver detects the overflow condition, but then fails to report it to
the ARS state machine after reaping the records. Propagate -ENOSPC
correctly to continue the ARS operation.
Cc: <[email protected]>
Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue")
Reported-by: Jacek Zloch <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/nfit/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -2845,9 +2845,9 @@ static int acpi_nfit_query_poison(struct
return rc;
if (ars_status_process_records(acpi_desc))
- return -ENOMEM;
+ dev_err(acpi_desc->dev, "Failed to process ARS records\n");
- return 0;
+ return rc;
}
static int ars_register(struct acpi_nfit_desc *acpi_desc,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vishal Verma <[email protected]>
commit e8a308e5f47e545e0d41d0686c00f5f5217c5f61 upstream.
The NFIT machine check handler uses the physical address from the mce
structure, and compares it against information in the ACPI NFIT table
to determine whether that location lies on an NVDIMM. The mce->addr
field however may not always be valid, and this is indicated by the
MCI_STATUS_ADDRV bit in the status field.
Export mce_usable_address() which already performs validation for the
address, and use it in the NFIT handler.
Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Robert Elliott <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
CC: Arnd Bergmann <[email protected]>
Cc: Dan Williams <[email protected]>
CC: Dave Jiang <[email protected]>
CC: [email protected]
CC: "H. Peter Anvin" <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: Len Brown <[email protected]>
CC: [email protected]
CC: linux-edac <[email protected]>
CC: [email protected]
CC: Qiuxu Zhuo <[email protected]>
CC: "Rafael J. Wysocki" <[email protected]>
CC: Ross Zwisler <[email protected]>
CC: stable <[email protected]>
CC: Thomas Gleixner <[email protected]>
CC: Tony Luck <[email protected]>
CC: x86-ml <[email protected]>
CC: Yazen Ghannam <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/mce.h | 1 +
arch/x86/kernel/cpu/mcheck/mce.c | 3 ++-
drivers/acpi/nfit/mce.c | 4 ++++
3 files changed, 7 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -217,6 +217,7 @@ static inline int umc_normaddr_to_sysadd
int mce_available(struct cpuinfo_x86 *c);
bool mce_is_memory_error(struct mce *m);
bool mce_is_correctable(struct mce *m);
+int mce_usable_address(struct mce *m);
DECLARE_PER_CPU(unsigned, mce_exception_count);
DECLARE_PER_CPU(unsigned, mce_poll_count);
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -485,7 +485,7 @@ static void mce_report_event(struct pt_r
* be somewhat complicated (e.g. segment offset would require an instruction
* parser). So only support physical addresses up to page granuality for now.
*/
-static int mce_usable_address(struct mce *m)
+int mce_usable_address(struct mce *m)
{
if (!(m->status & MCI_STATUS_ADDRV))
return 0;
@@ -505,6 +505,7 @@ static int mce_usable_address(struct mce
return 1;
}
+EXPORT_SYMBOL_GPL(mce_usable_address);
bool mce_is_memory_error(struct mce *m)
{
--- a/drivers/acpi/nfit/mce.c
+++ b/drivers/acpi/nfit/mce.c
@@ -29,6 +29,10 @@ static int nfit_handle_mce(struct notifi
if (!mce_is_memory_error(mce) || mce_is_correctable(mce))
return NOTIFY_DONE;
+ /* Verify the address reported in the MCE is valid. */
+ if (!mce_usable_address(mce))
+ return NOTIFY_DONE;
+
/*
* mce->addr contains the physical addr accessed that caused the
* machine check. We need to walk through the list of NFITs, and see
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Garry <[email protected]>
commit 0b0cf6af3f3151c26c27e8e51def5527091c3e69 upstream.
coccicheck currently warns of the following issues in the driver:
drivers/crypto/hisilicon/sec/sec_algs.c:864:51-66: ERROR: reference preceded by free on line 812
drivers/crypto/hisilicon/sec/sec_algs.c:864:40-49: ERROR: reference preceded by free on line 813
drivers/crypto/hisilicon/sec/sec_algs.c:861:8-24: ERROR: reference preceded by free on line 814
drivers/crypto/hisilicon/sec/sec_algs.c:860:41-51: ERROR: reference preceded by free on line 815
drivers/crypto/hisilicon/sec/sec_algs.c:867:7-18: ERROR: reference preceded by free on line 816
It would appear than on certain error paths that we may attempt reference-
after-free some memories.
This patch fixes those issues. The solution doesn't look perfect, but
having same memories free'd possibly from separate functions makes it
tricky.
Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver")
Reviewed-by: Jonathan Cameron <[email protected]>
Cc: <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/hisilicon/sec/sec_algs.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
--- a/drivers/crypto/hisilicon/sec/sec_algs.c
+++ b/drivers/crypto/hisilicon/sec/sec_algs.c
@@ -808,13 +808,6 @@ static int sec_alg_skcipher_crypto(struc
* more refined but this is unlikely to happen so no need.
*/
- /* Cleanup - all elements in pointer arrays have been coppied */
- kfree(splits_in_nents);
- kfree(splits_in);
- kfree(splits_out_nents);
- kfree(splits_out);
- kfree(split_sizes);
-
/* Grab a big lock for a long time to avoid concurrency issues */
mutex_lock(&queue->queuelock);
@@ -829,13 +822,13 @@ static int sec_alg_skcipher_crypto(struc
(!queue->havesoftqueue ||
kfifo_avail(&queue->softqueue) > steps)) ||
!list_empty(&ctx->backlog)) {
+ ret = -EBUSY;
if ((skreq->base.flags & CRYPTO_TFM_REQ_MAY_BACKLOG)) {
list_add_tail(&sec_req->backlog_head, &ctx->backlog);
mutex_unlock(&queue->queuelock);
- return -EBUSY;
+ goto out;
}
- ret = -EBUSY;
mutex_unlock(&queue->queuelock);
goto err_free_elements;
}
@@ -844,7 +837,15 @@ static int sec_alg_skcipher_crypto(struc
if (ret)
goto err_free_elements;
- return -EINPROGRESS;
+ ret = -EINPROGRESS;
+out:
+ /* Cleanup - all elements in pointer arrays have been copied */
+ kfree(splits_in_nents);
+ kfree(splits_in);
+ kfree(splits_out_nents);
+ kfree(splits_out);
+ kfree(split_sizes);
+ return ret;
err_free_elements:
list_for_each_entry_safe(el, temp, &sec_req->elements, head) {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amir Goldstein <[email protected]>
commit 8f97d1e99149a7f1aa19e47a51b09764382a482e upstream.
Some anon_bdev filesystems (e.g. overlayfs, ceph) don't have s_blocksize
set. Returning zero from FIGETBSZ ioctl results in a Floating point
exception from the e2fsprogs utility filefrag, which divides the size of
the file with the value returned by FIGETBSZ.
Fix the interface by returning -EINVAL for these filesystems.
Fixes: d1d04ef8572b ("ovl: stack file ops")
Cc: <[email protected]> # v4.19
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ioctl.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -669,6 +669,9 @@ int do_vfs_ioctl(struct file *filp, unsi
return ioctl_fiemap(filp, arg);
case FIGETBSZ:
+ /* anon_bdev filesystems may not have a block size */
+ if (!inode->i_sb->s_blocksize)
+ return -EINVAL;
return put_user(inode->i_sb->s_blocksize, argp);
case FICLONE:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit 732ee9a912cf2d9a50c5f9c4213cdc2f885d6aa6 upstream.
The response data buffer used in switch scan is reused 4 times. (For example,
for commands GPN_FT, GNN_FT for FCP and FC-NVME) Before driver reuses this
buffer, clear it to prevent duplicate entries in our database.
Fixes: a4239945b8ad1 ("scsi: qla2xxx: Add switch command to simplify fabric discovery"
Cc: <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_gs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -4447,9 +4447,9 @@ int qla24xx_async_gpnft(scsi_qla_host_t
sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
- rspsz = sizeof(struct ct_sns_gpnft_rsp) +
- ((vha->hw->max_fibre_devices - 1) *
- sizeof(struct ct_sns_gpn_ft_data));
+ rspsz = sp->u.iocb_cmd.u.ctarg.rsp_size;
+ memset(sp->u.iocb_cmd.u.ctarg.rsp, 0, sp->u.iocb_cmd.u.ctarg.rsp_size);
+ memset(sp->u.iocb_cmd.u.ctarg.req, 0, sp->u.iocb_cmd.u.ctarg.req_size);
ct_sns = (struct ct_sns_pkt *)sp->u.iocb_cmd.u.ctarg.req;
/* CT_IU preamble */
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
commit 8dc765d438f1e42b3e8227b3b09fad7d73f4ec9a upstream.
c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.
Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.
However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.
In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.
This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.
Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones <[email protected]>
Cc: Bart Van Assche <[email protected]>
Cc: [email protected]
Cc: Martin K. Petersen <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: stable <[email protected]>
Cc: jianchao.wang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-core.c | 5 ++---
drivers/scsi/scsi_lib.c | 8 ++++++++
2 files changed, 10 insertions(+), 3 deletions(-)
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -793,9 +793,8 @@ void blk_cleanup_queue(struct request_qu
* dispatch may still be in-progress since we dispatch requests
* from more than one contexts.
*
- * No need to quiesce queue if it isn't initialized yet since
- * blk_freeze_queue() should be enough for cases of passthrough
- * request.
+ * We rely on driver to deal with the race in case that queue
+ * initialization isn't done.
*/
if (q->mq_ops && blk_queue_init_done(q))
blk_mq_quiesce_queue(q);
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -697,6 +697,12 @@ static bool scsi_end_request(struct requ
*/
scsi_mq_uninit_cmd(cmd);
+ /*
+ * queue is still alive, so grab the ref for preventing it
+ * from being cleaned up during running queue.
+ */
+ percpu_ref_get(&q->q_usage_counter);
+
__blk_mq_end_request(req, error);
if (scsi_target(sdev)->single_lun ||
@@ -704,6 +710,8 @@ static bool scsi_end_request(struct requ
kblockd_schedule_work(&sdev->requeue_work);
else
blk_mq_run_hw_queues(q, true);
+
+ percpu_ref_put(&q->q_usage_counter);
} else {
unsigned long flags;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit cc4ebf5c0a3440ed0a32d25c55ebdb6ce5f3c0bc upstream.
This reverts commit 4f94b2c7462d9720b2afa7e8e8d4c19446bb31ce.
That commit was buggy, as it used rlwinm instead of rlwimi.
Instead of fixing that bug, we revert the previous commit in order to
reduce the dependency between L1 entries and L2 entries
Fixes: 4f94b2c7462d9 ("powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/mmu-8xx.h | 34 ++++-----------------------
arch/powerpc/kernel/head_8xx.S | 45 ++++++++++++++++++++++---------------
arch/powerpc/mm/8xx_mmu.c | 2 -
3 files changed, 34 insertions(+), 47 deletions(-)
--- a/arch/powerpc/include/asm/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -34,20 +34,12 @@
* respectively NA for All or X for Supervisor and no access for User.
* Then we use the APG to say whether accesses are according to Page rules or
* "all Supervisor" rules (Access to all)
- * We also use the 2nd APG bit for _PAGE_ACCESSED when having SWAP:
- * When that bit is not set access is done iaw "all user"
- * which means no access iaw page rules.
- * Therefore, we define 4 APG groups. lsb is _PMD_USER, 2nd is _PAGE_ACCESSED
- * 0x => No access => 11 (all accesses performed as user iaw page definition)
- * 10 => No user => 01 (all accesses performed according to page definition)
- * 11 => User => 00 (all accesses performed as supervisor iaw page definition)
+ * Therefore, we define 2 APG groups. lsb is _PMD_USER
+ * 0 => No user => 01 (all accesses performed according to page definition)
+ * 1 => User => 00 (all accesses performed as supervisor iaw page definition)
* We define all 16 groups so that all other bits of APG can take any value
*/
-#ifdef CONFIG_SWAP
-#define MI_APG_INIT 0xf4f4f4f4
-#else
#define MI_APG_INIT 0x44444444
-#endif
/* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MI_RPN is written, bits in
@@ -115,20 +107,12 @@
* Supervisor and no access for user and NA for ALL.
* Then we use the APG to say whether accesses are according to Page rules or
* "all Supervisor" rules (Access to all)
- * We also use the 2nd APG bit for _PAGE_ACCESSED when having SWAP:
- * When that bit is not set access is done iaw "all user"
- * which means no access iaw page rules.
- * Therefore, we define 4 APG groups. lsb is _PMD_USER, 2nd is _PAGE_ACCESSED
- * 0x => No access => 11 (all accesses performed as user iaw page definition)
- * 10 => No user => 01 (all accesses performed according to page definition)
- * 11 => User => 00 (all accesses performed as supervisor iaw page definition)
+ * Therefore, we define 2 APG groups. lsb is _PMD_USER
+ * 0 => No user => 01 (all accesses performed according to page definition)
+ * 1 => User => 00 (all accesses performed as supervisor iaw page definition)
* We define all 16 groups so that all other bits of APG can take any value
*/
-#ifdef CONFIG_SWAP
-#define MD_APG_INIT 0xf4f4f4f4
-#else
#define MD_APG_INIT 0x44444444
-#endif
/* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MD_RPN is written, bits in
@@ -180,12 +164,6 @@
*/
#define SPRN_M_TW 799
-/* APGs */
-#define M_APG0 0x00000000
-#define M_APG1 0x00000020
-#define M_APG2 0x00000040
-#define M_APG3 0x00000060
-
#ifdef CONFIG_PPC_MM_SLICES
#include <asm/nohash/32/slice.h>
#define SLICE_ARRAY_SIZE (1 << (32 - SLICE_LOW_SHIFT - 1))
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -353,13 +353,14 @@ _ENTRY(ITLBMiss_cmp)
#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_HUGETLB_PAGE)
mtcr r12
#endif
-
-#ifdef CONFIG_SWAP
- rlwinm r11, r10, 31, _PAGE_ACCESSED >> 1
-#endif
/* Load the MI_TWC with the attributes for this "segment." */
mtspr SPRN_MI_TWC, r11 /* Set segment attributes */
+#ifdef CONFIG_SWAP
+ rlwinm r11, r10, 32-5, _PAGE_PRESENT
+ and r11, r11, r10
+ rlwimi r10, r11, 0, _PAGE_PRESENT
+#endif
li r11, RPN_PATTERN | 0x200
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 20 and 23 must be clear.
@@ -470,14 +471,22 @@ _ENTRY(DTLBMiss_jmp)
* above.
*/
rlwimi r11, r10, 0, _PAGE_GUARDED
-#ifdef CONFIG_SWAP
- /* _PAGE_ACCESSED has to be set. We use second APG bit for that, 0
- * on that bit will represent a Non Access group
- */
- rlwinm r11, r10, 31, _PAGE_ACCESSED >> 1
-#endif
mtspr SPRN_MD_TWC, r11
+ /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
+ * We also need to know if the insn is a load/store, so:
+ * Clear _PAGE_PRESENT and load that which will
+ * trap into DTLB Error with store bit set accordinly.
+ */
+ /* PRESENT=0x1, ACCESSED=0x20
+ * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
+ * r10 = (r10 & ~PRESENT) | r11;
+ */
+#ifdef CONFIG_SWAP
+ rlwinm r11, r10, 32-5, _PAGE_PRESENT
+ and r11, r11, r10
+ rlwimi r10, r11, 0, _PAGE_PRESENT
+#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
@@ -637,8 +646,8 @@ InstructionBreakpoint:
*/
DTLBMissIMMR:
mtcr r12
- /* Set 512k byte guarded page and mark it valid and accessed */
- li r10, MD_PS512K | MD_GUARDED | MD_SVALID | M_APG2
+ /* Set 512k byte guarded page and mark it valid */
+ li r10, MD_PS512K | MD_GUARDED | MD_SVALID
mtspr SPRN_MD_TWC, r10
mfspr r10, SPRN_IMMR /* Get current IMMR */
rlwinm r10, r10, 0, 0xfff80000 /* Get 512 kbytes boundary */
@@ -656,8 +665,8 @@ _ENTRY(dtlb_miss_exit_2)
DTLBMissLinear:
mtcr r12
- /* Set 8M byte page and mark it valid and accessed */
- li r11, MD_PS8MEG | MD_SVALID | M_APG2
+ /* Set 8M byte page and mark it valid */
+ li r11, MD_PS8MEG | MD_SVALID
mtspr SPRN_MD_TWC, r11
rlwinm r10, r10, 0, 0x0f800000 /* 8xx supports max 256Mb RAM */
ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_PRIVILEGED | _PAGE_DIRTY | \
@@ -675,8 +684,8 @@ _ENTRY(dtlb_miss_exit_3)
#ifndef CONFIG_PIN_TLB_TEXT
ITLBMissLinear:
mtcr r12
- /* Set 8M byte page and mark it valid,accessed */
- li r11, MI_PS8MEG | MI_SVALID | M_APG2
+ /* Set 8M byte page and mark it valid */
+ li r11, MI_PS8MEG | MI_SVALID
mtspr SPRN_MI_TWC, r11
rlwinm r10, r10, 0, 0x0f800000 /* 8xx supports max 256Mb RAM */
ori r10, r10, 0xf0 | MI_SPS16K | _PAGE_PRIVILEGED | _PAGE_DIRTY | \
@@ -960,7 +969,7 @@ initial_mmu:
ori r8, r8, MI_EVALID /* Mark it valid */
mtspr SPRN_MI_EPN, r8
li r8, MI_PS8MEG /* Set 8M byte page */
- ori r8, r8, MI_SVALID | M_APG2 /* Make it valid, APG 2 */
+ ori r8, r8, MI_SVALID /* Make it valid */
mtspr SPRN_MI_TWC, r8
li r8, MI_BOOTINIT /* Create RPN for address 0 */
mtspr SPRN_MI_RPN, r8 /* Store TLB entry */
@@ -987,7 +996,7 @@ initial_mmu:
ori r8, r8, MD_EVALID /* Mark it valid */
mtspr SPRN_MD_EPN, r8
li r8, MD_PS512K | MD_GUARDED /* Set 512k byte page */
- ori r8, r8, MD_SVALID | M_APG2 /* Make it valid and accessed */
+ ori r8, r8, MD_SVALID /* Make it valid */
mtspr SPRN_MD_TWC, r8
mr r8, r9 /* Create paddr for TLB */
ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
--- a/arch/powerpc/mm/8xx_mmu.c
+++ b/arch/powerpc/mm/8xx_mmu.c
@@ -79,7 +79,7 @@ void __init MMU_init_hw(void)
for (; i < 32 && mem >= LARGE_PAGE_SIZE_8M; i++) {
mtspr(SPRN_MD_CTR, ctr | (i << 8));
mtspr(SPRN_MD_EPN, (unsigned long)__va(addr) | MD_EVALID);
- mtspr(SPRN_MD_TWC, MD_PS8MEG | MD_SVALID | M_APG2);
+ mtspr(SPRN_MD_TWC, MD_PS8MEG | MD_SVALID);
mtspr(SPRN_MD_RPN, addr | flags | _PAGE_PRESENT);
addr += LARGE_PAGE_SIZE_8M;
mem -= LARGE_PAGE_SIZE_8M;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d6ee1e7e9004d3d246cdfa14196989e0a9466c16 ]
Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor
uses the fdiv2 and fdiv3 to, among other things, provide the cpu
clock.
Until clock hand-off mechanism makes its way to CCF and the generic
SCPI claims platform specific clocks, these clocks must be marked as
critical to make sure they are never disabled when needed by the
co-processor.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates")
Signed-off-by: Jerome Brunet <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/meson/axg.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index 00ce62ad6416..8cf74fc423e6 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -319,6 +319,7 @@ static struct clk_regmap axg_fclk_div2 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div2_div" },
.num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
},
};
@@ -343,6 +344,18 @@ static struct clk_regmap axg_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * FIXME:
+ * This clock, as fdiv2, is used by the SCPI FW and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) The SCPI generic driver claims and enable all the clocks
+ * it needs
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
--
2.17.1
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kirill Tkhai <[email protected]>
commit d2d2d4fb1f54eff0f3faa9762d84f6446a4bc5d0 upstream.
After we found req in request_find() and released the lock,
everything may happen with the req in parallel:
cpu0 cpu1
fuse_dev_do_write() fuse_dev_do_write()
req = request_find(fpq, ...) ...
spin_unlock(&fpq->lock) ...
... req = request_find(fpq, oh.unique)
... spin_unlock(&fpq->lock)
queue_interrupt(&fc->iq, req); ...
... ...
... ...
request_end(fc, req);
fuse_put_request(fc, req);
... queue_interrupt(&fc->iq, req);
Signed-off-by: Kirill Tkhai <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts")
Cc: <[email protected]> # v4.2
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1877,16 +1877,20 @@ static ssize_t fuse_dev_do_write(struct
/* Is it an interrupt reply? */
if (req->intr_unique == oh.unique) {
+ __fuse_get_request(req);
spin_unlock(&fpq->lock);
err = -EINVAL;
- if (nbytes != sizeof(struct fuse_out_header))
+ if (nbytes != sizeof(struct fuse_out_header)) {
+ fuse_put_request(fc, req);
goto err_finish;
+ }
if (oh.error == -ENOSYS)
fc->no_interrupt = 1;
else if (oh.error == -EAGAIN)
queue_interrupt(&fc->iq, req);
+ fuse_put_request(fc, req);
fuse_copy_finish(cs);
return nbytes;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Changwei Ge <[email protected]>
commit 29aa30167a0a2e6045a0d6d2e89d8168132333d5 upstream.
Somehow, file system metadata was corrupted, which causes
ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
According to the original design intention, if above happens we should
skip the problematic block and continue to retrieve dir entry. But
there is obviouse misuse of brelse around related code.
After failure of ocfs2_check_dir_entry(), current code just moves to
next position and uses the problematic buffer head again and again
during which the problematic buffer head is released for multiple times.
I suppose, this a serious issue which is long-lived in ocfs2. This may
cause other file systems which is also used in a the same host insane.
So we should also consider about bakcporting this patch into linux
-stable.
Link: http://lkml.kernel.org/r/HK2PR06MB045211675B43EED794E597B6D56E0@HK2PR06MB0452.apcprd06.prod.outlook.com
Signed-off-by: Changwei Ge <[email protected]>
Suggested-by: Changkuo Shi <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/dir.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(stru
/* On error, skip the f_pos to the
next block. */
ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
- brelse(bh);
- continue;
+ break;
}
if (le64_to_cpu(de->inode)) {
unsigned char d_type = DT_UNKNOWN;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen <[email protected]>
[ Upstream commit 2794f688b2c336e0da85e9f91fed33febbd9f54a ]
Call pcie_bus_configure_settings() on MIPS, like for other platforms.
The function pcie_bus_configure_settings() makes sure the MPS (Max
Payload Size) across the bus is uniform and provides the ability to
tune the MRSS (Max Read Request Size) and MPS (Max Payload Size) to
higher performance values. Some devices will not operate properly if
these aren't set correctly because the firmware doesn't always do it.
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/20649/
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: Fuxin Zhang <[email protected]>
Cc: Zhangjin Wu <[email protected]>
Cc: Huacai Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/pci/pci-legacy.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/mips/pci/pci-legacy.c
+++ b/arch/mips/pci/pci-legacy.c
@@ -127,8 +127,12 @@ static void pcibios_scanbus(struct pci_c
if (pci_has_flag(PCI_PROBE_ONLY)) {
pci_bus_claim_resources(bus);
} else {
+ struct pci_bus *child;
+
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
}
pci_bus_add_devices(bus);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit 908a572b80f6e9577b45e81b3dfe2e22111286b8 upstream.
Using waitqueue_active() is racy. Make sure we issue a wake_up()
unconditionally after storing into fc->blocked. After that it's okay to
optimize with waitqueue_active() since the first wake up provides the
necessary barrier for all waiters, not the just the woken one.
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: 3c18ef8117f0 ("fuse: optimize wake_up")
Cc: <[email protected]> # v3.10
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -391,12 +391,19 @@ static void request_end(struct fuse_conn
if (test_bit(FR_BACKGROUND, &req->flags)) {
spin_lock(&fc->lock);
clear_bit(FR_BACKGROUND, &req->flags);
- if (fc->num_background == fc->max_background)
+ if (fc->num_background == fc->max_background) {
fc->blocked = 0;
-
- /* Wake up next waiter, if any */
- if (!fc->blocked && waitqueue_active(&fc->blocked_waitq))
wake_up(&fc->blocked_waitq);
+ } else if (!fc->blocked) {
+ /*
+ * Wake up next waiter, if any. It's okay to use
+ * waitqueue_active(), as we've already synced up
+ * fc->blocked with waiters with the wake_up() call
+ * above.
+ */
+ if (waitqueue_active(&fc->blocked_waitq))
+ wake_up(&fc->blocked_waitq);
+ }
if (fc->num_background == fc->congestion_threshold && fc->sb) {
clear_bdi_congested(fc->sb->s_bdi, BLK_RW_SYNC);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit 4c316f2f3ff315cb48efb7435621e5bfb81df96d upstream.
Otherwise fuse_dev_do_write() could come in and finish off the request, and
the set_bit(FR_SENT, ...) could trigger the WARN_ON(test_bit(FR_SENT, ...))
in request_end().
Signed-off-by: Miklos Szeredi <[email protected]>
Reported-by: [email protected]
Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts")
Cc: <[email protected]> # v4.2
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1319,8 +1319,8 @@ static ssize_t fuse_dev_do_read(struct f
}
list_move_tail(&req->list, &fpq->processing);
__fuse_get_request(req);
- spin_unlock(&fpq->lock);
set_bit(FR_SENT, &req->flags);
+ spin_unlock(&fpq->lock);
/* matches barrier in request_wait_answer() */
smp_mb__after_atomic();
if (test_bit(FR_INTERRUPTED, &req->flags))
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 8985167ecf57f97061599a155bb9652c84ea4913 upstream.
When driver is built as module and DT node contains clocks compatible
(e.g. "samsung,s2mps11-clk"), the module will not be autoloaded because
module aliases won't match.
The modalias from uevent: of:NclocksT<NULL>Csamsung,s2mps11-clk
The modalias from driver: platform:s2mps11-clk
The devices are instantiated by parent's MFD. However both Device Tree
bindings and parent define the compatible for clocks devices. In case
of module matching this DT compatible will be used.
The issue will not happen if this is a built-in (no need for module
matching) or when clocks DT node does not contain compatible (not
correct from bindings perspective but working for driver).
Note when backporting to stable kernels: adjust the list of device ID
entries.
Cc: <[email protected]>
Fixes: 53c31b3437a6 ("mfd: sec-core: Add of_compatible strings for clock MFD cells")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/clk-s2mps11.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -245,6 +245,36 @@ static const struct platform_device_id s
};
MODULE_DEVICE_TABLE(platform, s2mps11_clk_id);
+#ifdef CONFIG_OF
+/*
+ * Device is instantiated through parent MFD device and device matching is done
+ * through platform_device_id.
+ *
+ * However if device's DT node contains proper clock compatible and driver is
+ * built as a module, then the *module* matching will be done trough DT aliases.
+ * This requires of_device_id table. In the same time this will not change the
+ * actual *device* matching so do not add .of_match_table.
+ */
+static const struct of_device_id s2mps11_dt_match[] = {
+ {
+ .compatible = "samsung,s2mps11-clk",
+ .data = (void *)S2MPS11X,
+ }, {
+ .compatible = "samsung,s2mps13-clk",
+ .data = (void *)S2MPS13X,
+ }, {
+ .compatible = "samsung,s2mps14-clk",
+ .data = (void *)S2MPS14X,
+ }, {
+ .compatible = "samsung,s5m8767-clk",
+ .data = (void *)S5M8767X,
+ }, {
+ /* Sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, s2mps11_dt_match);
+#endif
+
static struct platform_driver s2mps11_clk_driver = {
.driver = {
.name = "s2mps11-clk",
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
commit fd5ba6ee3187617287fb9cb187e3d6b3631210a3 upstream
On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This
needs to be specified in DTS, otherwise the stmmac driver defaults to 64
buckets and initializes the filter incorrectly. As a result, e.g. valid
IPv6 multicast traffic ends up being dropped.
Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi")
Cc: [email protected]
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Dinh Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 003677e273a5..5089aa64088f 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -139,6 +139,7 @@
clock-names = "stmmaceth";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
status = "disabled";
};
@@ -154,6 +155,7 @@
clock-names = "stmmaceth";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
status = "disabled";
};
@@ -169,6 +171,7 @@
clock-names = "stmmaceth";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <256>;
status = "disabled";
};
--
2.17.1
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrea Arcangeli <[email protected]>
commit ac5b2c18911ffe95c08d69273917f90212cf5659 upstream.
THP allocation might be really disruptive when allocated on NUMA system
with the local node full or hard to reclaim. Stefan has posted an
allocation stall report on 4.12 based SLES kernel which suggests the
same issue:
kvm: page allocation stalls for 194572ms, order:9, mode:0x4740ca(__GFP_HIGHMEM|__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL|__GFP_THISNODE|__GFP_MOVABLE|__GFP_DIRECT_RECLAIM), nodemask=(null)
kvm cpuset=/ mems_allowed=0-1
CPU: 10 PID: 84752 Comm: kvm Tainted: G W 4.12.0+98-ph <a href="/view.php?id=1" title="[geschlossen] Integration Ramdisk" class="resolved">0000001</a> SLE15 (unreleased)
Hardware name: Supermicro SYS-1029P-WTRT/X11DDW-NT, BIOS 2.0 12/05/2017
Call Trace:
dump_stack+0x5c/0x84
warn_alloc+0xe0/0x180
__alloc_pages_slowpath+0x820/0xc90
__alloc_pages_nodemask+0x1cc/0x210
alloc_pages_vma+0x1e5/0x280
do_huge_pmd_wp_page+0x83f/0xf00
__handle_mm_fault+0x93d/0x1060
handle_mm_fault+0xc6/0x1b0
__do_page_fault+0x230/0x430
do_page_fault+0x2a/0x70
page_fault+0x7b/0x80
[...]
Mem-Info:
active_anon:126315487 inactive_anon:1612476 isolated_anon:5
active_file:60183 inactive_file:245285 isolated_file:0
unevictable:15657 dirty:286 writeback:1 unstable:0
slab_reclaimable:75543 slab_unreclaimable:2509111
mapped:81814 shmem:31764 pagetables:370616 bounce:0
free:32294031 free_pcp:6233 free_cma:0
Node 0 active_anon:254680388kB inactive_anon:1112760kB active_file:240648kB inactive_file:981168kB unevictable:13368kB isolated(anon):0kB isolated(file):0kB mapped:280240kB dirty:1144kB writeback:0kB shmem:95832kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 81225728kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
Node 1 active_anon:250583072kB inactive_anon:5337144kB active_file:84kB inactive_file:0kB unevictable:49260kB isolated(anon):20kB isolated(file):0kB mapped:47016kB dirty:0kB writeback:4kB shmem:31224kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 31897600kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
The defrag mode is "madvise" and from the above report it is clear that
the THP has been allocated for MADV_HUGEPAGA vma.
Andrea has identified that the main source of the problem is
__GFP_THISNODE usage:
: The problem is that direct compaction combined with the NUMA
: __GFP_THISNODE logic in mempolicy.c is telling reclaim to swap very
: hard the local node, instead of failing the allocation if there's no
: THP available in the local node.
:
: Such logic was ok until __GFP_THISNODE was added to the THP allocation
: path even with MPOL_DEFAULT.
:
: The idea behind the __GFP_THISNODE addition, is that it is better to
: provide local memory in PAGE_SIZE units than to use remote NUMA THP
: backed memory. That largely depends on the remote latency though, on
: threadrippers for example the overhead is relatively low in my
: experience.
:
: The combination of __GFP_THISNODE and __GFP_DIRECT_RECLAIM results in
: extremely slow qemu startup with vfio, if the VM is larger than the
: size of one host NUMA node. This is because it will try very hard to
: unsuccessfully swapout get_user_pages pinned pages as result of the
: __GFP_THISNODE being set, instead of falling back to PAGE_SIZE
: allocations and instead of trying to allocate THP on other nodes (it
: would be even worse without vfio type1 GUP pins of course, except it'd
: be swapping heavily instead).
Fix this by removing __GFP_THISNODE for THP requests which are
requesting the direct reclaim. This effectivelly reverts 5265047ac301
on the grounds that the zone/node reclaim was known to be disruptive due
to premature reclaim when there was memory free. While it made sense at
the time for HPC workloads without NUMA awareness on rare machines, it
was ultimately harmful in the majority of cases. The existing behaviour
is similar, if not as widespare as it applies to a corner case but
crucially, it cannot be tuned around like zone_reclaim_mode can. The
default behaviour should always be to cause the least harm for the
common case.
If there are specialised use cases out there that want zone_reclaim_mode
in specific cases, then it can be built on top. Longterm we should
consider a memory policy which allows for the node reclaim like behavior
for the specific memory ranges which would allow a
[1] http://lkml.kernel.org/r/[email protected]
Mel said:
: Both patches look correct to me but I'm responding to this one because
: it's the fix. The change makes sense and moves further away from the
: severe stalling behaviour we used to see with both THP and zone reclaim
: mode.
:
: I put together a basic experiment with usemem configured to reference a
: buffer multiple times that is 80% the size of main memory on a 2-socket
: box with symmetric node sizes and defrag set to "always". The defrag
: setting is not the default but it would be functionally similar to
: accessing a buffer with madvise(MADV_HUGEPAGE). Usemem is configured to
: reference the buffer multiple times and while it's not an interesting
: workload, it would be expected to complete reasonably quickly as it fits
: within memory. The results were;
:
: usemem
: vanilla noreclaim-v1
: Amean Elapsd-1 42.78 ( 0.00%) 26.87 ( 37.18%)
: Amean Elapsd-3 27.55 ( 0.00%) 7.44 ( 73.00%)
: Amean Elapsd-4 5.72 ( 0.00%) 5.69 ( 0.45%)
:
: This shows the elapsed time in seconds for 1 thread, 3 threads and 4
: threads referencing buffers 80% the size of memory. With the patches
: applied, it's 37.18% faster for the single thread and 73% faster with two
: threads. Note that 4 threads showing little difference does not indicate
: the problem is related to thread counts. It's simply the case that 4
: threads gets spread so their workload mostly fits in one node.
:
: The overall view from /proc/vmstats is more startling
:
: 4.19.0-rc1 4.19.0-rc1
: vanillanoreclaim-v1r1
: Minor Faults 35593425 708164
: Major Faults 484088 36
: Swap Ins 3772837 0
: Swap Outs 3932295 0
:
: Massive amounts of swap in/out without the patch
:
: Direct pages scanned 6013214 0
: Kswapd pages scanned 0 0
: Kswapd pages reclaimed 0 0
: Direct pages reclaimed 4033009 0
:
: Lots of reclaim activity without the patch
:
: Kswapd efficiency 100% 100%
: Kswapd velocity 0.000 0.000
: Direct efficiency 67% 100%
: Direct velocity 11191.956 0.000
:
: Mostly from direct reclaim context as you'd expect without the patch.
:
: Page writes by reclaim 3932314.000 0.000
: Page writes file 19 0
: Page writes anon 3932295 0
: Page reclaim immediate 42336 0
:
: Writes from reclaim context is never good but the patch eliminates it.
:
: We should never have default behaviour to thrash the system for such a
: basic workload. If zone reclaim mode behaviour is ever desired but on a
: single task instead of a global basis then the sensible option is to build
: a mempolicy that enforces that behaviour.
This was a severe regression compared to previous kernels that made
important workloads unusable and it starts when __GFP_THISNODE was
added to THP allocations under MADV_HUGEPAGE. It is not a significant
risk to go to the previous behavior before __GFP_THISNODE was added, it
worked like that for years.
This was simply an optimization to some lucky workloads that can fit in
a single node, but it ended up breaking the VM for others that can't
possibly fit in a single node, so going back is safe.
[[email protected]: rewrote the changelog based on the one from Andrea]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 5265047ac301 ("mm, thp: really limit transparent hugepage allocation to local node")
Signed-off-by: Andrea Arcangeli <[email protected]>
Signed-off-by: Michal Hocko <[email protected]>
Reported-by: Stefan Priebe <[email protected]>
Debugged-by: Andrea Arcangeli <[email protected]>
Reported-by: Alex Williamson <[email protected]>
Reviewed-by: Mel Gorman <[email protected]>
Tested-by: Mel Gorman <[email protected]>
Cc: Zi Yan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: <[email protected]> [4.1+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mempolicy.c | 32 ++++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2046,8 +2046,36 @@ alloc_pages_vma(gfp_t gfp, int order, st
nmask = policy_nodemask(gfp, pol);
if (!nmask || node_isset(hpage_node, *nmask)) {
mpol_cond_put(pol);
- page = __alloc_pages_node(hpage_node,
- gfp | __GFP_THISNODE, order);
+ /*
+ * We cannot invoke reclaim if __GFP_THISNODE
+ * is set. Invoking reclaim with
+ * __GFP_THISNODE set, would cause THP
+ * allocations to trigger heavy swapping
+ * despite there may be tons of free memory
+ * (including potentially plenty of THP
+ * already available in the buddy) on all the
+ * other NUMA nodes.
+ *
+ * At most we could invoke compaction when
+ * __GFP_THISNODE is set (but we would need to
+ * refrain from invoking reclaim even if
+ * compaction returned COMPACT_SKIPPED because
+ * there wasn't not enough memory to succeed
+ * compaction). For now just avoid
+ * __GFP_THISNODE instead of limiting the
+ * allocation path to a strict and single
+ * compaction invocation.
+ *
+ * Supposedly if direct reclaim was enabled by
+ * the caller, the app prefers THP regardless
+ * of the node it comes from so this would be
+ * more desiderable behavior than only
+ * providing THP originated from the local
+ * node in such case.
+ */
+ if (!(gfp & __GFP_DIRECT_RECLAIM))
+ gfp |= __GFP_THISNODE;
+ page = __alloc_pages_node(hpage_node, gfp, order);
goto out;
}
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Richter <[email protected]>
commit ea1fa48c055f833eb25f0c33188feecb7002ada5 upstream.
On s390 the CPU Measurement Facility for counters now supports
2 PMUs named cpum_cf (CPU Measurement Facility for counters) and
cpum_cf_diag (CPU Measurement Facility for diagnostic counters)
for one and the same CPU.
Running command
[root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
Measuring transactions
TX_C_TABORT_NO_SPECIAL: 0 expected:0
TX_C_TABORT_SPECIAL: 0 expected:0
TX_C_TEND: 1 expected:1
TX_NC_TABORT: 11 expected:11
TX_NC_TEND: 1 expected:1
Performance counter stats for '/root/mytests/cf-tx-events 1':
2 tx_c_tend
0.002120091 seconds time elapsed
0.000121000 seconds user
0.002127000 seconds sys
[root@s35lp76 perf]#
displays output which is unexpected (and wrong):
2 tx_c_tend
The test program definitely triggers only one transaction, as shown
in line 'TX_C_TEND: 1 expected:1'.
This is caused by the following call sequence:
pmu_lookup() scans and installs a PMU.
+--> pmu_aliases() parses all aliases in directory
.../<pmu-name>/events/* which are file names.
+--> pmu_aliases_parse() Read each file in directory and create
an new alias entry. This is done with
+--> perf_pmu__new_alias() and
+--> __perf_pmu__new_alias() which also check for
identical alias names.
After pmu_aliases() returns, a complete list of event names
for this pmu has been created. Now function
pmu_add_cpu_aliases() is called to add the events listed in the json
| files to the alias list of the cpu.
+--> perf_pmu__find_map() Returns a pointer to the json events.
Now function pmu_add_cpu_aliases() scans through all events listed
in the JSON files for this CPU.
Each json event pmu name is compared with the current PMU being
built up and if they mismatch, the json event is added to the
current PMUs alias list.
To avoid duplicate entries the following comparison is done:
if (!is_arm_pmu_core(name)) {
pname = pe->pmu ? pe->pmu : "cpu";
if (strncmp(pname, name, strlen(pname)))
continue;
}
The culprit is the strncmp() function.
Using current s390 PMU naming, the first PMU is 'cpum_cf'
and a long list of events is added, among them 'tx_c_tend'
When the second PMU named 'cpum_cf_diag' is added, only one event
named 'CF_DIAG' is added by the pmu_aliases() function.
Now function pmu_add_cpu_aliases() is invoked for PMU 'cpum_cf_diag'.
Since the CPUID string is the same for both PMUs, json file events
for PMU named 'cpum_cf' are added to the PMU 'cpm_cf_diag'
This happens because the strncmp() actually compares:
strncmp("cpum_cf", "cpum_cf_diag", 6);
The first parameter is the pmu name taken from the event in
the json file. The second parameter is the pmu name of the PMU
currently being built.
They are different, but the length of the compare only tests the
common prefix and this returns 0(true) when it should return false.
Now all events for PMU cpum_cf are added to the alias list for pmu
cpum_cf_diag.
Later on in function parse_events_add_pmu() the event 'tx_c_end' is
searched in all available PMUs and found twice, adding it two
times to the evsel_list global variable which is the root
of all events. This results in a counter value of 2 instead
of 1.
Output with this patch:
[root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
Measuring transactions
TX_C_TABORT_NO_SPECIAL: 0 expected:0
TX_C_TABORT_SPECIAL: 0 expected:0
TX_C_TEND: 1 expected:1
TX_NC_TABORT: 11 expected:11
TX_NC_TEND: 1 expected:1
Performance counter stats for '/root/mytests/cf-tx-events 1':
1 tx_c_tend
0.001815365 seconds time elapsed
0.000123000 seconds user
0.001756000 seconds sys
[root@s35lp76 perf]#
Signed-off-by: Thomas Richter <[email protected]>
Reviewed-by: Hendrik Brueckner <[email protected]>
Reviewed-by: Sebastien Boisvert <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: [email protected]
Fixes: 292c34c10249 ("perf pmu: Fix core PMU alias list for X86 platform")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/pmu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -773,7 +773,7 @@ static void pmu_add_cpu_aliases(struct l
if (!is_arm_pmu_core(name)) {
pname = pe->pmu ? pe->pmu : "cpu";
- if (strncmp(pname, name, strlen(pname)))
+ if (strcmp(pname, name))
continue;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan, Zheng <[email protected]>
commit efe328230dc01aa0b1269aad0b5fae73eea4677a upstream.
This reverts commit 8b8f53af1ed9df88a4c0fbfdf3db58f62060edf3.
splice_dentry() is used by three places. For two places, req->r_dentry
is passed to splice_dentry(). In the case of error, req->r_dentry does
not get updated. So splice_dentry() should not drop reference.
Cc: [email protected] # 4.18+
Signed-off-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/inode.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1132,8 +1132,12 @@ static struct dentry *splice_dentry(stru
if (IS_ERR(realdn)) {
pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n",
PTR_ERR(realdn), dn, in, ceph_vinop(in));
- dput(dn);
- dn = realdn; /* note realdn contains the error */
+ dn = realdn;
+ /*
+ * Caller should release 'dn' in the case of error.
+ * If 'req->r_dentry' is passed to this function,
+ * caller should leave 'req->r_dentry' untouched.
+ */
goto out;
} else if (realdn) {
dout("dn %p (%d) spliced with %p (%d) "
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kirill Tkhai <[email protected]>
commit bc78abbd55dd28e2287ec6d6502b842321a17c87 upstream.
We may pick freed req in this way:
[cpu0] [cpu1]
fuse_dev_do_read() fuse_dev_do_write()
list_move_tail(&req->list, ...); ...
spin_unlock(&fpq->lock); ...
... request_end(fc, req);
... fuse_put_request(fc, req);
if (test_bit(FR_INTERRUPTED, ...))
queue_interrupt(fiq, req);
Fix that by keeping req alive until we finish all manipulations.
Reported-by: [email protected]
Signed-off-by: Kirill Tkhai <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: 46c34a348b0a ("fuse: no fc->lock for pqueue parts")
Cc: <[email protected]> # v4.2
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1311,12 +1311,14 @@ static ssize_t fuse_dev_do_read(struct f
goto out_end;
}
list_move_tail(&req->list, &fpq->processing);
+ __fuse_get_request(req);
spin_unlock(&fpq->lock);
set_bit(FR_SENT, &req->flags);
/* matches barrier in request_wait_answer() */
smp_mb__after_atomic();
if (test_bit(FR_INTERRUPTED, &req->flags))
queue_interrupt(fiq, req);
+ fuse_put_request(fc, req);
return reqsize;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 242483068b4b9ad02f1653819b6e683577681e0e upstream.
In the absence of a fallback, callchains must encode also the callchain
context. Do that now there is no fallback.
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: [email protected] # 4.19
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt.c | 6 +++--
tools/perf/util/thread-stack.c | 44 ++++++++++++++++++++++++++++++++---------
tools/perf/util/thread-stack.h | 2 -
3 files changed, 40 insertions(+), 12 deletions(-)
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -763,7 +763,8 @@ static struct intel_pt_queue *intel_pt_a
if (pt->synth_opts.callchain) {
size_t sz = sizeof(struct ip_callchain);
- sz += pt->synth_opts.callchain_sz * sizeof(u64);
+ /* Add 1 to callchain_sz for callchain context */
+ sz += (pt->synth_opts.callchain_sz + 1) * sizeof(u64);
ptq->chain = zalloc(sz);
if (!ptq->chain)
goto out_free;
@@ -1159,7 +1160,8 @@ static void intel_pt_prep_sample(struct
if (pt->synth_opts.callchain) {
thread_stack__sample(ptq->thread, ptq->chain,
- pt->synth_opts.callchain_sz, sample->ip);
+ pt->synth_opts.callchain_sz + 1,
+ sample->ip, pt->kernel_start);
sample->callchain = ptq->chain;
}
--- a/tools/perf/util/thread-stack.c
+++ b/tools/perf/util/thread-stack.c
@@ -285,20 +285,46 @@ void thread_stack__free(struct thread *t
}
}
+static inline u64 callchain_context(u64 ip, u64 kernel_start)
+{
+ return ip < kernel_start ? PERF_CONTEXT_USER : PERF_CONTEXT_KERNEL;
+}
+
void thread_stack__sample(struct thread *thread, struct ip_callchain *chain,
- size_t sz, u64 ip)
+ size_t sz, u64 ip, u64 kernel_start)
{
- size_t i;
+ u64 context = callchain_context(ip, kernel_start);
+ u64 last_context;
+ size_t i, j;
+
+ if (sz < 2) {
+ chain->nr = 0;
+ return;
+ }
- if (!thread || !thread->ts)
- chain->nr = 1;
- else
- chain->nr = min(sz, thread->ts->cnt + 1);
+ chain->ips[0] = context;
+ chain->ips[1] = ip;
- chain->ips[0] = ip;
+ if (!thread || !thread->ts) {
+ chain->nr = 2;
+ return;
+ }
+
+ last_context = context;
+
+ for (i = 2, j = 1; i < sz && j <= thread->ts->cnt; i++, j++) {
+ ip = thread->ts->stack[thread->ts->cnt - j].ret_addr;
+ context = callchain_context(ip, kernel_start);
+ if (context != last_context) {
+ if (i >= sz - 1)
+ break;
+ chain->ips[i++] = context;
+ last_context = context;
+ }
+ chain->ips[i] = ip;
+ }
- for (i = 1; i < chain->nr; i++)
- chain->ips[i] = thread->ts->stack[thread->ts->cnt - i].ret_addr;
+ chain->nr = i;
}
struct call_return_processor *
--- a/tools/perf/util/thread-stack.h
+++ b/tools/perf/util/thread-stack.h
@@ -84,7 +84,7 @@ int thread_stack__event(struct thread *t
u64 to_ip, u16 insn_len, u64 trace_nr);
void thread_stack__set_trace_nr(struct thread *thread, u64 trace_nr);
void thread_stack__sample(struct thread *thread, struct ip_callchain *chain,
- size_t sz, u64 ip);
+ size_t sz, u64 ip, u64 kernel_start);
int thread_stack__flush(struct thread *thread);
void thread_stack__free(struct thread *thread);
size_t thread_stack__depth(struct thread *thread);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 3c6c6a7878d00a3ac997a779c5b9861ff25dfcc8 upstream.
The code for manual bit triple is not endian-clean. It builds the variable
"hostdword" using byte accesses, therefore we must read the variable with
"le32_to_cpu".
The patch also enables (hardware or software) bit triple only if the image
is monochrome (image->depth). If we want to blit full-color image, we
shouldn't use the triple code.
Signed-off-by: Mikulas Patocka <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Cc: [email protected]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/aty/mach64_accel.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/video/fbdev/aty/mach64_accel.c
+++ b/drivers/video/fbdev/aty/mach64_accel.c
@@ -345,7 +345,7 @@ void atyfb_imageblit(struct fb_info *inf
* since Rage 3D IIc we have DP_HOST_TRIPLE_EN bit
* this hwaccelerated triple has an issue with not aligned data
*/
- if (M64_HAS(HW_TRIPLE) && image->width % 8 == 0)
+ if (image->depth == 1 && M64_HAS(HW_TRIPLE) && image->width % 8 == 0)
pix_width |= DP_HOST_TRIPLE_EN;
}
@@ -382,7 +382,7 @@ void atyfb_imageblit(struct fb_info *inf
src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;
/* manual triple each pixel */
- if (info->var.bits_per_pixel == 24 && !(pix_width & DP_HOST_TRIPLE_EN)) {
+ if (image->depth == 1 && info->var.bits_per_pixel == 24 && !(pix_width & DP_HOST_TRIPLE_EN)) {
int inbit, outbit, mult24, byte_id_in_dword, width;
u8 *pbitmapin = (u8*)image->data, *pbitmapout;
u32 hostdword;
@@ -415,7 +415,7 @@ void atyfb_imageblit(struct fb_info *inf
}
}
wait_for_fifo(1, par);
- aty_st_le32(HOST_DATA0, hostdword, par);
+ aty_st_le32(HOST_DATA0, le32_to_cpu(hostdword), par);
}
} else {
u32 *pbitmap, dwords = (src_bytes + 3) / 4;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Garry <[email protected]>
commit 89c38422e072bb453e3045b8f1b962a344c3edea upstream.
Currently the NUMA distance map parsing does not validate the distance
table for the distance-matrix rules 1-2 in [1].
However the arch NUMA code may enforce some of these rules, but not all.
Such is the case for the arm64 port, which does not enforce the rule that
the distance between separates nodes cannot equal LOCAL_DISTANCE.
The patch adds the following rules validation:
- distance of node to self equals LOCAL_DISTANCE
- distance of separate nodes > LOCAL_DISTANCE
This change avoids a yet-unresolved crash reported in [2].
A note on dealing with symmetrical distances between nodes:
Validating symmetrical distances between nodes is difficult. If it were
mandated in the bindings that every distance must be recorded in the
table, then it would be easy. However, it isn't.
In addition to this, it is also possible to record [b, a] distance only
(and not [a, b]). So, when processing the table for [b, a], we cannot
assert that current distance of [a, b] != [b, a] as invalid, as [a, b]
distance may not be present in the table and current distance would be
default at REMOTE_DISTANCE.
As such, we maintain the policy that we overwrite distance [a, b] = [b, a]
for b > a. This policy is different to kernel ACPI SLIT validation, which
allows non-symmetrical distances (ACPI spec SLIT rules allow it). However,
the distance debug message is dropped as it may be misleading (for a distance
which is later overwritten).
Some final notes on semantics:
- It is implied that it is the responsibility of the arch NUMA code to
reset the NUMA distance map for an error in distance map parsing.
- It is the responsibility of the FW NUMA topology parsing (whether OF or
ACPI) to enforce NUMA distance rules, and not arch NUMA code.
[1] Documents/devicetree/bindings/numa.txt
[2] https://www.spinics.net/lists/arm-kernel/msg683304.html
Cc: [email protected] # 4.7
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/of/of_numa.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/of/of_numa.c
+++ b/drivers/of/of_numa.c
@@ -115,9 +115,14 @@ static int __init of_numa_parse_distance
distance = of_read_number(matrix, 1);
matrix++;
+ if ((nodea == nodeb && distance != LOCAL_DISTANCE) ||
+ (nodea != nodeb && distance <= LOCAL_DISTANCE)) {
+ pr_err("Invalid distance[node%d -> node%d] = %d\n",
+ nodea, nodeb, distance);
+ return -EINVAL;
+ }
+
numa_set_distance(nodea, nodeb, distance);
- pr_debug("distance[node%d -> node%d] = %d\n",
- nodea, nodeb, distance);
/* Set default distance of node B->A same as A->B */
if (nodeb > nodea)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Kelley <[email protected]>
commit 1de72c706488b7be664a601cf3843bd01e327e58 upstream.
Hyper-V emulation of the PIT has a quirk such that the normal PIT shutdown
path doesn't work, because clearing the counter register restarts the
timer.
Disable the counter clearing on PIT shutdown.
Signed-off-by: Michael Kelley <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: vkuznets <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: KY Srinivasan <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/mshyperv.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -20,6 +20,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kexec.h>
+#include <linux/i8253.h>
#include <asm/processor.h>
#include <asm/hypervisor.h>
#include <asm/hyperv-tlfs.h>
@@ -285,6 +286,16 @@ static void __init ms_hyperv_init_platfo
if (efi_enabled(EFI_BOOT))
x86_platform.get_nmi_reason = hv_get_nmi_reason;
+ /*
+ * Hyper-V VMs have a PIT emulation quirk such that zeroing the
+ * counter register during PIT shutdown restarts the PIT. So it
+ * continues to interrupt @18.2 HZ. Setting i8253_clear_counter
+ * to false tells pit_shutdown() not to zero the counter so that
+ * the PIT really is shutdown. Generation 2 VMs don't have a PIT,
+ * and setting this value has no effect.
+ */
+ i8253_clear_counter_on_shutdown = false;
+
#if IS_ENABLED(CONFIG_HYPERV)
/*
* Setup the hook to get control post apic initialization.
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Icenowy Zheng <[email protected]>
commit 2852bfbf4f168fec27049ad9ed20941fc9e84b95 upstream.
The bus clocks (AHB/APB) on Allwinner H6 have their second divider start
at bit 8, according to the user manual and the BSP code. However,
currently the divider offset is incorrectly set to 16, thus the divider
is not correctly read and the clock frequency is not correctly calculated.
Fix this bit offset on all affected bus clocks in ccu-sun50i-h6.
Cc: [email protected] # v4.17.y
Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -224,7 +224,7 @@ static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ah
psi_ahb1_ahb2_parents,
0x510,
0, 5, /* M */
- 16, 2, /* P */
+ 8, 2, /* P */
24, 2, /* mux */
0);
@@ -233,19 +233,19 @@ static const char * const ahb3_apb1_apb2
"pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
0, 5, /* M */
- 16, 2, /* P */
+ 8, 2, /* P */
24, 2, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
0, 5, /* M */
- 16, 2, /* P */
+ 8, 2, /* P */
24, 2, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
0, 5, /* M */
- 16, 2, /* P */
+ 8, 2, /* P */
24, 2, /* mux */
0);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit dd33ad7b251f900481701b2a82d25de583867708 upstream.
We have received a bug report that unbinding a large pmem (>1TB) can
result in a soft lockup:
NMI watchdog: BUG: soft lockup - CPU#9 stuck for 23s! [ndctl:4365]
[...]
Supported: Yes
CPU: 9 PID: 4365 Comm: ndctl Not tainted 4.12.14-94.40-default #1 SLE12-SP4
Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018
task: ffff9cce7d4410c0 task.stack: ffffbe9eb1bc4000
RIP: 0010:__put_page+0x62/0x80
Call Trace:
devm_memremap_pages_release+0x152/0x260
release_nodes+0x18d/0x1d0
device_release_driver_internal+0x160/0x210
unbind_store+0xb3/0xe0
kernfs_fop_write+0x102/0x180
__vfs_write+0x26/0x150
vfs_write+0xad/0x1a0
SyS_write+0x42/0x90
do_syscall_64+0x74/0x150
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7fd13166b3d0
It has been reported on an older (4.12) kernel but the current upstream
code doesn't cond_resched in the hot remove code at all and the given
range to remove might be really large. Fix the issue by calling
cond_resched once per memory section.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Acked-by: Johannes Thumshirn <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory_hotplug.c | 1 +
1 file changed, 1 insertion(+)
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -587,6 +587,7 @@ int __remove_pages(struct zone *zone, un
for (i = 0; i < sections_to_remove; i++) {
unsigned long pfn = phys_start_pfn + i*PAGES_PER_SECTION;
+ cond_resched();
ret = __remove_section(zone, __pfn_to_section(pfn), map_offset,
altmap);
map_offset = 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit e9a2310fb689151166df7fd9971093362d34bd79 upstream.
There is a potential execution path in which function
platform_get_resource() returns NULL. If this happens,
we will end up having a NULL pointer dereference.
Fix this by replacing devm_ioremap with devm_ioremap_resource,
which has the NULL check and the memory region request.
This code was detected with the help of Coccinelle.
Cc: [email protected]
Fixes: 97b7129cd2af ("reset: hisilicon: change the definition of hisi_reset_init")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/hisilicon/reset.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/clk/hisilicon/reset.c
+++ b/drivers/clk/hisilicon/reset.c
@@ -109,9 +109,8 @@ struct hisi_reset_controller *hisi_reset
return NULL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- rstc->membase = devm_ioremap(&pdev->dev,
- res->start, resource_size(res));
- if (!rstc->membase)
+ rstc->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rstc->membase))
return NULL;
spin_lock_init(&rstc->lock);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Edwards <[email protected]>
commit 4542d623c7134bc1738f8a68ccb6dd546f1c264f upstream.
Commands with protection information included were not truncating the
protection iov_iter to the number of protection bytes in the command.
This resulted in vhost_scsi mis-calculating the size of the protection
SGL in vhost_scsi_calc_sgls(), and including both the protection and
data SG entries in the protection SGL.
Fixes: 09b13fa8c1a1 ("vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq")
Signed-off-by: Greg Edwards <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Fixes: 09b13fa8c1a1093e9458549ac8bb203a7c65c62a
Cc: [email protected]
Reviewed-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/scsi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -964,7 +964,8 @@ vhost_scsi_handle_vq(struct vhost_scsi *
prot_bytes = vhost32_to_cpu(vq, v_req_pi.pi_bytesin);
}
/*
- * Set prot_iter to data_iter, and advance past any
+ * Set prot_iter to data_iter and truncate it to
+ * prot_bytes, and advance data_iter past any
* preceeding prot_bytes that may be present.
*
* Also fix up the exp_data_len to reflect only the
@@ -973,6 +974,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *
if (prot_bytes) {
exp_data_len -= prot_bytes;
prot_iter = data_iter;
+ iov_iter_truncate(&prot_iter, prot_bytes);
iov_iter_advance(&data_iter, prot_bytes);
}
tag = vhost64_to_cpu(vq, v_req_pi.tag);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Garry <[email protected]>
commit 68a031d22c57b94870ba13513c9d93b8a8119ab2 upstream.
When the source and destination addresses for the cipher are the same, we
will get a NULL dereference from accessing the split destination
scatterlist memories, as shown:
[ 56.565719] tcrypt:
[ 56.565719] testing speed of async ecb(aes) (hisi_sec_aes_ecb) encryption
[ 56.574683] tcrypt: test 0 (128 bit key, 16 byte blocks):
[ 56.587585] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 56.596361] Mem abort info:
[ 56.599151] ESR = 0x96000006
[ 56.602196] Exception class = DABT (current EL), IL = 32 bits
[ 56.608105] SET = 0, FnV = 0
[ 56.611149] EA = 0, S1PTW = 0
[ 56.614280] Data abort info:
[ 56.617151] ISV = 0, ISS = 0x00000006
[ 56.620976] CM = 0, WnR = 0
[ 56.623930] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[ 56.630533] [0000000000000000] pgd=0000041fc7e4d003, pud=0000041fcd9bf003, pmd=0000000000000000
[ 56.639224] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 56.644782] Modules linked in: tcrypt(+)
[ 56.648695] CPU: 21 PID: 2326 Comm: insmod Tainted: G W 4.19.0-rc6-00001-g3fabfb8-dirty #716
[ 56.658420] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 10/05/2018
[ 56.667537] pstate: 20000005 (nzCv daif -PAN -UAO)
[ 56.672322] pc : sec_alg_skcipher_crypto+0x318/0x748
[ 56.677274] lr : sec_alg_skcipher_crypto+0x178/0x748
[ 56.682224] sp : ffff0000118e3840
[ 56.685525] x29: ffff0000118e3840 x28: ffff841fbb3f8118
[ 56.690825] x27: 0000000000000000 x26: 0000000000000000
[ 56.696125] x25: ffff841fbb3f8080 x24: ffff841fbadc0018
[ 56.701425] x23: ffff000009119000 x22: ffff841fbb24e280
[ 56.706724] x21: ffff841ff212e780 x20: ffff841ff212e700
[ 56.712023] x19: 0000000000000001 x18: ffffffffffffffff
[ 56.717322] x17: 0000000000000000 x16: 0000000000000000
[ 56.722621] x15: ffff0000091196c8 x14: 72635f7265687069
[ 56.727920] x13: 636b735f676c615f x12: ffff000009119940
[ 56.733219] x11: 0000000000000000 x10: 00000000006080c0
[ 56.738519] x9 : 0000000000000000 x8 : ffff841fbb24e480
[ 56.743818] x7 : ffff841fbb24e500 x6 : ffff841ff00cdcc0
[ 56.749117] x5 : 0000000000000010 x4 : 0000000000000000
[ 56.754416] x3 : ffff841fbb24e380 x2 : ffff841fbb24e480
[ 56.759715] x1 : 0000000000000000 x0 : ffff000008f682c8
[ 56.765016] Process insmod (pid: 2326, stack limit = 0x(____ptrval____))
[ 56.771702] Call trace:
[ 56.774136] sec_alg_skcipher_crypto+0x318/0x748
[ 56.778740] sec_alg_skcipher_encrypt+0x10/0x18
[ 56.783259] test_skcipher_speed+0x2a0/0x700 [tcrypt]
[ 56.788298] do_test+0x18f8/0x48c8 [tcrypt]
[ 56.792469] tcrypt_mod_init+0x60/0x1000 [tcrypt]
[ 56.797161] do_one_initcall+0x5c/0x178
[ 56.800985] do_init_module+0x58/0x1b4
[ 56.804721] load_module+0x1da4/0x2150
[ 56.808456] __se_sys_init_module+0x14c/0x1e8
[ 56.812799] __arm64_sys_init_module+0x18/0x20
[ 56.817231] el0_svc_common+0x60/0xe8
[ 56.820880] el0_svc_handler+0x2c/0x80
[ 56.824615] el0_svc+0x8/0xc
[ 56.827483] Code: a94c87a3 910b2000 f87b7842 f9004ba2 (b87b7821)
[ 56.833564] ---[ end trace 0f63290590e93d94 ]---
Segmentation fault
Fix this by only accessing these memories when we have different src and
dst.
Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver")
Reviewed-by: Jonathan Cameron <[email protected]>
Cc: <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/hisilicon/sec/sec_algs.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/crypto/hisilicon/sec/sec_algs.c
+++ b/drivers/crypto/hisilicon/sec/sec_algs.c
@@ -732,6 +732,7 @@ static int sec_alg_skcipher_crypto(struc
int *splits_in_nents;
int *splits_out_nents = NULL;
struct sec_request_el *el, *temp;
+ bool split = skreq->src != skreq->dst;
mutex_init(&sec_req->lock);
sec_req->req_base = &skreq->base;
@@ -750,7 +751,7 @@ static int sec_alg_skcipher_crypto(struc
if (ret)
goto err_free_split_sizes;
- if (skreq->src != skreq->dst) {
+ if (split) {
sec_req->len_out = sg_nents(skreq->dst);
ret = sec_map_and_split_sg(skreq->dst, split_sizes, steps,
&splits_out, &splits_out_nents,
@@ -785,8 +786,9 @@ static int sec_alg_skcipher_crypto(struc
split_sizes[i],
skreq->src != skreq->dst,
splits_in[i], splits_in_nents[i],
- splits_out[i],
- splits_out_nents[i], info);
+ split ? splits_out[i] : NULL,
+ split ? splits_out_nents[i] : 0,
+ info);
if (IS_ERR(el)) {
ret = PTR_ERR(el);
goto err_free_elements;
@@ -854,7 +856,7 @@ err_free_elements:
crypto_skcipher_ivsize(atfm),
DMA_BIDIRECTIONAL);
err_unmap_out_sg:
- if (skreq->src != skreq->dst)
+ if (split)
sec_unmap_sg_on_err(skreq->dst, steps, splits_out,
splits_out_nents, sec_req->len_out,
info->dev);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lu Fengqi <[email protected]>
commit fcd5e74288f7d36991b1f0fb96b8c57079645e38 upstream.
When running generic/475, we may get the following warning in dmesg:
[ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs]
[ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G W O 4.19.0-rc8+ #8
[ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs]
[ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286
[ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007
[ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74
[ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000
[ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88
[ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100
[ 6902.129060] FS: 00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000
[ 6902.130996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0
[ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6902.137836] Call Trace:
[ 6902.138939] close_ctree+0x171/0x330 [btrfs]
[ 6902.140181] ? kthread_stop+0x146/0x1f0
[ 6902.141277] generic_shutdown_super+0x6c/0x100
[ 6902.142517] kill_anon_super+0x14/0x30
[ 6902.143554] btrfs_kill_super+0x13/0x100 [btrfs]
[ 6902.144790] deactivate_locked_super+0x2f/0x70
[ 6902.146014] cleanup_mnt+0x3b/0x70
[ 6902.147020] task_work_run+0x9e/0xd0
[ 6902.148036] do_syscall_64+0x470/0x600
[ 6902.149142] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 6902.150375] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 6902.151640] RIP: 0033:0x7f45077a6a7b
[ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b
[ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490
[ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0
[ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490
[ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8
[ 6902.167553] irq event stamp: 0
[ 6902.168998] hardirqs last enabled at (0): [<0000000000000000>] (null)
[ 6902.170731] hardirqs last disabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00
[ 6902.172773] softirqs last enabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00
[ 6902.174671] softirqs last disabled at (0): [<0000000000000000>] (null)
[ 6902.176407] ---[ end trace 463138c2986b275c ]---
[ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full
[ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536
In the above line there's "pinned=18446744073708158976" which is an
unsigned u64 value of -1392640, an obvious underflow.
When transaction_kthread is running cleanup_transaction(), another
fsstress is running btrfs_commit_transaction(). The
btrfs_finish_extent_commit() may get the same range as
btrfs_destroy_pinned_extent() got, which causes the pinned underflow.
Fixes: d4b450cd4b33 ("Btrfs: fix race between transaction commit and empty block group removal")
CC: [email protected] # 4.4+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Lu Fengqi <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/disk-io.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -4359,13 +4359,23 @@ static int btrfs_destroy_pinned_extent(s
unpin = pinned_extents;
again:
while (1) {
+ /*
+ * The btrfs_finish_extent_commit() may get the same range as
+ * ours between find_first_extent_bit and clear_extent_dirty.
+ * Hence, hold the unused_bg_unpin_mutex to avoid double unpin
+ * the same extent range.
+ */
+ mutex_lock(&fs_info->unused_bg_unpin_mutex);
ret = find_first_extent_bit(unpin, 0, &start, &end,
EXTENT_DIRTY, NULL);
- if (ret)
+ if (ret) {
+ mutex_unlock(&fs_info->unused_bg_unpin_mutex);
break;
+ }
clear_extent_dirty(unpin, start, end);
btrfs_error_unpin_extent_range(fs_info, start, end);
+ mutex_unlock(&fs_info->unused_bg_unpin_mutex);
cond_resched();
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
commit 008c6753f7e070c77c70d708a6bf0255b4381763 upstream.
Recently we got a massive simplification for fsync, where for the fast
path we no longer log new extents while their respective ordered extents
are still running.
However that simplification introduced a subtle regression for the case
where we use a ranged fsync (msync). Consider the following example:
CPU 0 CPU 1
mmap write to range [2Mb, 4Mb[
mmap write to range [512Kb, 1Mb[
msync range [512K, 1Mb[
--> triggers fast fsync
(BTRFS_INODE_NEEDS_FULL_SYNC
not set)
--> creates extent map A for this
range and adds it to list of
modified extents
--> starts ordered extent A for
this range
--> waits for it to complete
writeback triggered for range
[2Mb, 4Mb[
--> create extent map B and
adds it to the list of
modified extents
--> creates ordered extent B
--> start looking for and logging
modified extents
--> logs extent maps A and B
--> finds checksums for extent A
in the csum tree, but not for
extent B
fsync (msync) finishes
--> ordered extent B
finishes and its
checksums are added
to the csum tree
<power cut>
After replaying the log, we have the extent covering the range [2Mb, 4Mb[
but do not have the data checksum items covering that file range.
This happens because at the very beginning of an fsync (btrfs_sync_file())
we start and wait for IO in the given range [512Kb, 1Mb[ and therefore
wait for any ordered extents in that range to complete before we start
logging the extents. However if right before we start logging the extent
in our range [512Kb, 1Mb[, writeback is started for any other dirty range,
such as the range [2Mb, 4Mb[ due to memory pressure or a concurrent fsync
or msync (btrfs_sync_file() starts writeback before acquiring the inode's
lock), an ordered extent is created for that other range and a new extent
map is created to represent that range and added to the inode's list of
modified extents.
That means that we will see that other extent in that list when collecting
extents for logging (done at btrfs_log_changed_extents()) and log the
extent before the respective ordered extent finishes - namely before the
checksum items are added to the checksums tree, which is where
log_extent_csums() looks for the checksums, therefore making us log an
extent without logging its checksums. Before that massive simplification
of fsync, this wasn't a problem because besides looking for checkums in
the checksums tree, we also looked for them in any ordered extent still
running.
The consequence of data checksums missing for a file range is that users
attempting to read the affected file range will get -EIO errors and dmesg
reports the following:
[10188.358136] BTRFS info (device sdc): no csum found for inode 297 start 57344
[10188.359278] BTRFS warning (device sdc): csum failed root 5 ino 297 off 57344 csum 0x98f94189 expected csum 0x00000000 mirror 1
So fix this by skipping extents outside of our logging range at
btrfs_log_changed_extents() and leaving them on the list of modified
extents so that any subsequent ranged fsync may collect them if needed.
Also, if we find a hole extent outside of the range still log it, just
to prevent having gaps between extent items after replaying the log,
otherwise fsck will complain when we are not using the NO_HOLES feature
(fstest btrfs/056 triggers such case).
Fixes: e7175a692765 ("btrfs: remove the wait ordered logic in the log_one_extent path")
CC: [email protected] # 4.19+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -4399,6 +4399,23 @@ static int btrfs_log_changed_extents(str
logged_end = end;
list_for_each_entry_safe(em, n, &tree->modified_extents, list) {
+ /*
+ * Skip extents outside our logging range. It's important to do
+ * it for correctness because if we don't ignore them, we may
+ * log them before their ordered extent completes, and therefore
+ * we could log them without logging their respective checksums
+ * (the checksum items are added to the csum tree at the very
+ * end of btrfs_finish_ordered_io()). Also leave such extents
+ * outside of our range in the list, since we may have another
+ * ranged fsync in the near future that needs them. If an extent
+ * outside our range corresponds to a hole, log it to avoid
+ * leaving gaps between extents (fsck will complain when we are
+ * not using the NO_HOLES feature).
+ */
+ if ((em->start > end || em->start + em->len <= start) &&
+ em->block_start != EXTENT_MAP_HOLE)
+ continue;
+
list_del_init(&em->list);
/*
* Just an arbitrary number, this can be really CPU intensive
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit f635e48e866ee1a47d2d42ce012fdcc07bf55853 upstream.
This patch initializes port speed so that firmware does not set lower
operating speed. Setting lower speed in firmware impacts WRITE perfomance.
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Tested-by: Laurence Oberman <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4714,6 +4714,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vh
fcport->loop_id = FC_NO_LOOP_ID;
qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
fcport->supported_classes = FC_COS_UNSPECIFIED;
+ fcport->fp_speed = PORT_SPEED_UNKNOWN;
fcport->ct_desc.ct_sns = dma_alloc_coherent(&vha->hw->pdev->dev,
sizeof(struct ct_sns_pkt), &fcport->ct_desc.ct_sns_dma,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
commit ac765f83f1397646c11092a032d4f62c3d478b81 upstream.
We currently allow cloning a range from a file which includes the last
block of the file even if the file's size is not aligned to the block
size. This is fine and useful when the destination file has the same size,
but when it does not and the range ends somewhere in the middle of the
destination file, it leads to corruption because the bytes between the EOF
and the end of the block have undefined data (when there is support for
discard/trimming they have a value of 0x00).
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ export foo_size=$((256 * 1024 + 100))
$ xfs_io -f -c "pwrite -S 0x3c 0 $foo_size" /mnt/foo
$ xfs_io -f -c "pwrite -S 0xb5 0 1M" /mnt/bar
$ xfs_io -c "reflink /mnt/foo 0 512K $foo_size" /mnt/bar
$ od -A d -t x1 /mnt/bar
0000000 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5
*
0524288 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c
*
0786528 3c 3c 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00
0786544 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0790528 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5
*
1048576
The bytes in the range from 786532 (512Kb + 256Kb + 100 bytes) to 790527
(512Kb + 256Kb + 4Kb - 1) got corrupted, having now a value of 0x00 instead
of 0xb5.
This is similar to the problem we had for deduplication that got recently
fixed by commit de02b9f6bb65 ("Btrfs: fix data corruption when
deduplicating between different files").
Fix this by not allowing such operations to be performed and return the
errno -EINVAL to user space. This is what XFS is doing as well at the VFS
level. This change however now makes us return -EINVAL instead of
-EOPNOTSUPP for cases where the source range maps to an inline extent and
the destination range's end is smaller then the destination file's size,
since the detection of inline extents is done during the actual process of
dropping file extent items (at __btrfs_drop_extents()). Returning the
-EINVAL error is done early on and solely based on the input parameters
(offsets and length) and destination file's size. This makes us consistent
with XFS and anyone else supporting cloning since this case is now checked
at a higher level in the VFS and is where the -EINVAL will be returned
from starting with kernel 4.20 (the VFS changed was introduced in 4.20-rc1
by commit 07d19dc9fbe9 ("vfs: avoid problematic remapping requests into
partial EOF block"). So this change is more geared towards stable kernels,
as it's unlikely the new VFS checks get removed intentionally.
A test case for fstests follows soon, as well as an update to filter
existing tests that expect -EOPNOTSUPP to accept -EINVAL as well.
CC: <[email protected]> # 4.4+
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/ioctl.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -4280,9 +4280,17 @@ static noinline int btrfs_clone_files(st
goto out_unlock;
if (len == 0)
olen = len = src->i_size - off;
- /* if we extend to eof, continue to block boundary */
- if (off + len == src->i_size)
+ /*
+ * If we extend to eof, continue to block boundary if and only if the
+ * destination end offset matches the destination file's size, otherwise
+ * we would be corrupting data by placing the eof block into the middle
+ * of a file.
+ */
+ if (off + len == src->i_size) {
+ if (!IS_ALIGNED(len, bs) && destoff + len < inode->i_size)
+ goto out_unlock;
len = ALIGN(src->i_size, bs) - off;
+ }
if (len == 0) {
ret = 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit cea5794122125bf67559906a0762186cf417099c upstream.
Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Cc: [email protected] # 3.3
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -459,16 +459,18 @@ static int set_flexbg_block_bitmap(struc
BUFFER_TRACE(bh, "get_write_access");
err = ext4_journal_get_write_access(handle, bh);
- if (err)
+ if (err) {
+ brelse(bh);
return err;
+ }
ext4_debug("mark block bitmap %#04llx (+%llu/%u)\n",
first_cluster, first_cluster - start, count2);
ext4_set_bits(bh->b_data, first_cluster - start, count2);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (unlikely(err))
return err;
- brelse(bh);
}
return 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 61a9c11e5e7a0dab5381afa5d9d4dd5ebf18f7a0 upstream.
Fixes: 01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.7
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -926,6 +926,7 @@ static int add_new_gdb_meta_bg(struct su
sizeof(struct buffer_head *),
GFP_NOFS);
if (!n_group_desc) {
+ brelse(gdb_bh);
err = -ENOMEM;
ext4_warning(sb, "not enough memory for %lu groups",
gdb_num + 1);
@@ -941,8 +942,6 @@ static int add_new_gdb_meta_bg(struct su
kvfree(o_group_desc);
BUFFER_TRACE(gdb_bh, "get_write_access");
err = ext4_journal_get_write_access(handle, gdb_bh);
- if (unlikely(err))
- brelse(gdb_bh);
return err;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit f9a7082327e26f54067a49cac2316d31e0cc8ba7 upstream.
Use the new of_get_compatible_child() helper to lookup the legacy
pwrlevels child node instead of using of_find_compatible_node(), which
searches the entire tree from a given start node and thus can return an
unrelated (i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the probed device's node).
While at it, also fix the related child-node reference leak.
Fixes: e2af8b6b0ca1 ("drm/msm: gpu: Use OPP tables if we can")
Cc: stable <[email protected]> # 4.12
Cc: Jordan Crouse <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: David Airlie <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index da1363a0c54d..93d70f4a2154 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -633,8 +633,7 @@ static int adreno_get_legacy_pwrlevels(struct device *dev)
struct device_node *child, *node;
int ret;
- node = of_find_compatible_node(dev->of_node, NULL,
- "qcom,gpu-pwrlevels");
+ node = of_get_compatible_child(dev->of_node, "qcom,gpu-pwrlevels");
if (!node) {
dev_err(dev, "Could not find the GPU powerlevels\n");
return -ENXIO;
@@ -655,6 +654,8 @@ static int adreno_get_legacy_pwrlevels(struct device *dev)
dev_pm_opp_add(dev, val, 0);
}
+ of_node_put(node);
+
return 0;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
commit a27460c9768ee19949c5b91f3d959ccd88c2a64a upstream
Properly specify the RX and TX FIFO size which is important
for Jumbo frames.
Update the max-frame-size to support Jumbo frames.
Signed-off-by: Thor Thayer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 6 ++++++
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index bc6c141d7372..003677e273a5 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -137,6 +137,8 @@
reset-names = "stmmaceth", "stmmaceth-ocp";
clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
clock-names = "stmmaceth";
+ tx-fifo-depth = <16384>;
+ rx-fifo-depth = <16384>;
status = "disabled";
};
@@ -150,6 +152,8 @@
reset-names = "stmmaceth", "stmmaceth-ocp";
clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
clock-names = "stmmaceth";
+ tx-fifo-depth = <16384>;
+ rx-fifo-depth = <16384>;
status = "disabled";
};
@@ -163,6 +167,8 @@
reset-names = "stmmaceth", "stmmaceth-ocp";
clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
clock-names = "stmmaceth";
+ tx-fifo-depth = <16384>;
+ rx-fifo-depth = <16384>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 6edc4fa9fd42..7c661753bfaf 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -76,7 +76,7 @@
phy-mode = "rgmii";
phy-handle = <&phy0>;
- max-frame-size = <3800>;
+ max-frame-size = <9000>;
mdio0 {
#address-cells = <1>;
--
2.17.1
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit db6aee62406d9fbb53315fcddd81f1dc271d49fa upstream.
Fixes: 1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.7
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -2058,6 +2058,10 @@ retry:
n_blocks_count_retry = 0;
free_flex_gd(flex_gd);
flex_gd = NULL;
+ if (resize_inode) {
+ iput(resize_inode);
+ resize_inode = NULL;
+ }
goto retry;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e2576c8bdfd462c34b8a46c0084e7c30b0851bf4 ]
On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems
with reboot; e.g. a ~60 second delay between issuing reboot and the
board power cycling (and in some OS configurations reboot will fail
and require manual power cycling).
Similar to 'commit c987ac6f1f088663b6dad39281071aeb31d450a8 ("clk:
meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4
Co-Processor seems to depend on FCLK_DIV3 being operational.
Until commit 05f814402d6174369b3b29832cbb5eb5ed287059 ("clk:
meson: add fdiv clock gates"), this clock was modeled and left on by
the bootloader.
We don't have precise documentation about the SCPI Co-Processor and
its clock requirement so we are learning things the hard way.
Marking this clock as critical solves the problem but it should not
be viewed as final solution. Ideally, the SCPI driver should claim
these clocks. We also depends on some clock hand-off mechanism
making its way to CCF, to make sure the clock stays on between its
registration and the SCPI driver probe.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates")
Signed-off-by: Christian Hewitt <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/meson/gxbb.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 86d3ae58e84c..6435d86118f1 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -522,6 +522,18 @@ static struct clk_regmap gxbb_fclk_div3 = {
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "fclk_div3_div" },
.num_parents = 1,
+ /*
+ * FIXME:
+ * This clock, as fdiv2, is used by the SCPI FW and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) The SCPI generic driver claims and enable all the clocks
+ * it needs
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
--
2.17.1
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit feaf264ce7f8d54582e2f66eb82dd9dd124c94f3 upstream.
Fixes: d745a8c20c1f ("ext4: reduce contention on s_orphan_lock")
Fixes: 6e3617e579e0 ("ext4: Handle non empty on-disk orphan link")
Cc: Dmitry Monakhov <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.34
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2811,7 +2811,9 @@ int ext4_orphan_add(handle_t *handle, st
list_del_init(&EXT4_I(inode)->i_orphan);
mutex_unlock(&sbi->s_orphan_lock);
}
- }
+ } else
+ brelse(iloc.bh);
+
jbd_debug(4, "superblock will point to %lu\n", inode->i_ino);
jbd_debug(4, "orphan inode %lu will point to %d\n",
inode->i_ino, NEXT_ORPHAN(inode));
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit a6758309a005060b8297a538a457c88699cb2520 upstream.
ext4_mark_iloc_dirty() callers expect that it releases iloc->bh
even if it returns an error.
Fixes: 0db1ff222d40 ("ext4: add shutdown bit and check for it")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 4.11
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5804,9 +5804,10 @@ int ext4_mark_iloc_dirty(handle_t *handl
{
int err = 0;
- if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
+ if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) {
+ put_bh(iloc->bh);
return -EIO;
-
+ }
if (IS_I_VERSION(inode))
inode_inc_iversion(inode);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Himanshu Madhani <[email protected]>
commit 39553065f77c297239308470ee313841f4e07db4 upstream.
This patch fixes multiple call for qla_nvme_unregister_remote_port() as part
of qlt_schedule_session_for_deletion(), Do not call it again during
qla_nvme_delete()
Fixes: e473b3074104 ("scsi: qla2xxx: Add FC-NVMe abort processing")
Cc: <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_nvme.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -660,9 +660,6 @@ void qla_nvme_delete(struct scsi_qla_hos
__func__, fcport);
nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port, 0);
- init_completion(&fcport->nvme_del_done);
- nvme_fc_unregister_remoteport(fcport->nvme_remote_port);
- wait_for_completion(&fcport->nvme_del_done);
}
if (vha->nvme_local_port) {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <[email protected]>
commit 4f32c38b4662312dd3c5f113d8bdd459887fb773 upstream.
Fixes: b40971426a83 ("ext4: add error checking to calls to ...")
Reported-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.38
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -871,6 +871,7 @@ static int add_new_gdb(handle_t *handle,
err = ext4_handle_dirty_metadata(handle, NULL, gdb_bh);
if (unlikely(err)) {
ext4_std_error(sb, err);
+ iloc.bh = NULL;
goto exit_inode;
}
brelse(dind);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit ea0abbb648452cdb6e1734b702b6330a7448fcf8 upstream.
Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.19
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1124,8 +1124,10 @@ static void update_backups(struct super_
backup_block, backup_block -
ext4_group_first_block_no(sb, group));
BUFFER_TRACE(bh, "get_write_access");
- if ((err = ext4_journal_get_write_access(handle, bh)))
+ if ((err = ext4_journal_get_write_access(handle, bh))) {
+ brelse(bh);
break;
+ }
lock_buffer(bh);
memcpy(bh->b_data, data, size);
if (rest)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: David S. Miller <[email protected]>
commit e9024d519d892b38176cafd46f68a7cdddd77412 upstream.
When processing using 'perf report -g caller', which is the default, we
ended up reverting the callchain entries received from the kernel, but
simply reverting throws away the information that tells that from a
point onwards the addresses are for userspace, kernel, guest kernel,
guest user, hypervisor.
The idea is that if we are walking backwards, for each cluster of
non-cpumode entries we have to first scan backwards for the next one and
use that for the cluster.
This seems silly and more expensive than it needs to be but it is enough
for a initial fix.
The code here is really complicated because it is intimately intertwined
with the lbr and branch handling, as well as this callchain order,
further fixes will be needed to properly take into account the cpumode
in those cases.
Another problem with ORDER_CALLER is that the NULL "0" IP that is at the
end of most callchains shows up at the top of the histogram because
every callchain contains it and with ORDER_CALLER it is the first entry.
Signed-off-by: David S. Miller <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Souvik Banerjee <[email protected]>
Cc: Wang Nan <[email protected]>
Cc: [email protected] # 4.19
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/machine.c | 35 ++++++++++++++++++++++++++++++++++-
1 file changed, 34 insertions(+), 1 deletion(-)
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -2140,6 +2140,27 @@ static int resolve_lbr_callchain_sample(
return 0;
}
+static int find_prev_cpumode(struct ip_callchain *chain, struct thread *thread,
+ struct callchain_cursor *cursor,
+ struct symbol **parent,
+ struct addr_location *root_al,
+ u8 *cpumode, int ent)
+{
+ int err = 0;
+
+ while (--ent >= 0) {
+ u64 ip = chain->ips[ent];
+
+ if (ip >= PERF_CONTEXT_MAX) {
+ err = add_callchain_ip(thread, cursor, parent,
+ root_al, cpumode, ip,
+ false, NULL, NULL, 0);
+ break;
+ }
+ }
+ return err;
+}
+
static int thread__resolve_callchain_sample(struct thread *thread,
struct callchain_cursor *cursor,
struct perf_evsel *evsel,
@@ -2246,6 +2267,12 @@ static int thread__resolve_callchain_sam
}
check_calls:
+ if (callchain_param.order != ORDER_CALLEE) {
+ err = find_prev_cpumode(chain, thread, cursor, parent, root_al,
+ &cpumode, chain->nr - first_call);
+ if (err)
+ return (err < 0) ? err : 0;
+ }
for (i = first_call, nr_entries = 0;
i < chain_nr && nr_entries < max_stack; i++) {
u64 ip;
@@ -2260,9 +2287,15 @@ check_calls:
continue;
#endif
ip = chain->ips[j];
-
if (ip < PERF_CONTEXT_MAX)
++nr_entries;
+ else if (callchain_param.order != ORDER_CALLEE) {
+ err = find_prev_cpumode(chain, thread, cursor, parent,
+ root_al, &cpumode, j);
+ if (err)
+ return (err < 0) ? err : 0;
+ continue;
+ }
err = add_callchain_ip(thread, cursor, parent,
root_al, &cpumode, ip,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jarod Wilson <[email protected]>
commit ea53abfab960909d622ca37bcfb8e1c5378d21cc upstream.
Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to
BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values
were read, to fix a problem with slaves getting into weird states, but
in the process, broke tracking of link failures, as going straight to
BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted)
means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because
!link_state was already true, we never incremented commit, and never got
a chance to call bond_miimon_commit(), where slave->link_failure_count
would be incremented. I believe the simple fix here is to mark the slave
as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from
_FAIL to either _UP or _DOWN, and in the latter case, we now get proper
incrementing of link_failure_count again.
Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event")
CC: Mahesh Bandewar <[email protected]>
CC: David S. Miller <[email protected]>
CC: [email protected]
CC: [email protected]
Signed-off-by: Jarod Wilson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3111,13 +3111,13 @@ static int bond_slave_netdev_event(unsig
case NETDEV_CHANGE:
/* For 802.3ad mode only:
* Getting invalid Speed/Duplex values here will put slave
- * in weird state. So mark it as link-down for the time
+ * in weird state. So mark it as link-fail for the time
* being and let link-monitoring (miimon) set it right when
* correct speeds/duplex are available.
*/
if (bond_update_speed_duplex(slave) &&
BOND_MODE(bond) == BOND_MODE_8023AD)
- slave->link = BOND_LINK_DOWN;
+ slave->link = BOND_LINK_FAIL;
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_adapter_speed_duplex_changed(slave);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
commit 91d7b67000c6e9bd605624079fee5a084238ad92 upstream.
We return 0 unconditionally in 'cqspi_direct_read_execute()'.
However, 'ret' is set to some error codes in several error handling
paths.
Return 'ret' instead to propagate the error code.
Fixes: ffa639e069fb ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads")
Cc: <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/spi-nor/cadence-quadspi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -996,7 +996,7 @@ static int cqspi_direct_read_execute(str
err_unmap:
dma_unmap_single(nor->dev, dma_dst, len, DMA_DEV_TO_MEM);
- return 0;
+ return ret;
}
static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream.
I noticed during the creation of another bugfix that the BCH_CONST_PARAMS
option that is set by DOCG3 breaks setting variable parameters for any
other users of the BCH library code.
The only other user we have today is the MTD_NAND software BCH
implementation (most flash controllers use hardware BCH these days
and are not affected). I considered removing BCH_CONST_PARAMS entirely
because of the inherent conflict, but according to the description in
lib/bch.c there is a significant performance benefit in keeping it.
To avoid the immediate problem of the conflict between MTD_NAND_BCH
and DOCG3, this only sets the constant parameters if MTD_NAND_BCH
is disabled, which should fix the problem for all cases that
are affected. This should also work for all stable kernels.
Note that there is only one machine that actually seems to use the
DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have
the driver disabled, but it almost certainly shows up if we wanted
to test random kernels on machines that use software BCH in MTD.
Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code")
Cc: [email protected]
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/devices/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -207,7 +207,7 @@ comment "Disk-On-Chip Device Drivers"
config MTD_DOCG3
tristate "M-Systems Disk-On-Chip G3"
select BCH
- select BCH_CONST_PARAMS
+ select BCH_CONST_PARAMS if !MTD_NAND_BCH
select BITREVERSE
help
This provides an MTD device driver for the M-Systems DiskOnChip
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 6bdc9977fcdedf47118d2caf7270a19f4b6d8a8f upstream.
Fixes: 3f2571c1f91f ("ext4: factor out xattr moving")
Fixes: 6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...")
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.23
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/xattr.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2627,6 +2627,8 @@ out:
kfree(buffer);
if (is)
brelse(is->iloc.bh);
+ if (bs)
+ brelse(bs->bh);
kfree(is);
kfree(bs);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit dded2e159208a9edc21dd5c5f583afa28d378d39 upstream.
On a powerpc 8xx, 'btc' fails as follows:
Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0x0
when booting the kernel with 'debug_boot_weak_hash', it fails as well
Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0xba99ad80
On other platforms, Oopses have been observed too, see
https://github.com/linuxppc/linux/issues/139
This is due to btc calling 'btt' with %p pointer as an argument.
This patch replaces %p by %px to get the real pointer value as
expected by 'btt'
Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Daniel Thompson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/debug/kdb/kdb_bt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/kernel/debug/kdb/kdb_bt.c
+++ b/kernel/debug/kdb/kdb_bt.c
@@ -179,14 +179,14 @@ kdb_bt(int argc, const char **argv)
kdb_printf("no process for cpu %ld\n", cpu);
return 0;
}
- sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu));
+ sprintf(buf, "btt 0x%px\n", KDB_TSK(cpu));
kdb_parse(buf);
return 0;
}
kdb_printf("btc: cpu status: ");
kdb_parse("cpu\n");
for_each_online_cpu(cpu) {
- sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu));
+ sprintf(buf, "btt 0x%px\n", KDB_TSK(cpu));
kdb_parse(buf);
touch_nmi_watchdog();
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: H. Peter Anvin <[email protected]>
commit 991a25194097006ec1e0d2e0814ff920e59e3465 upstream.
On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does
not do any limit checking on the tty_baudrate[] array, and in fact a
buffer overrun is possible on both architectures. Add a limit check to
prevent that situation.
This will be followed by a much bigger cleanup/simplification patch.
Signed-off-by: H. Peter Anvin (Intel) <[email protected]>
Requested-by: Cc: Johan Hovold <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Eugene Syromiatnikov <[email protected]>
Cc: Alan Cox <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/tty_baudrate.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/tty_baudrate.c
+++ b/drivers/tty/tty_baudrate.c
@@ -77,7 +77,7 @@ speed_t tty_termios_baud_rate(struct kte
else
cbaud += 15;
}
- return baud_table[cbaud];
+ return cbaud >= n_baud_table ? 0 : baud_table[cbaud];
}
EXPORT_SYMBOL(tty_termios_baud_rate);
@@ -113,7 +113,7 @@ speed_t tty_termios_input_baud_rate(stru
else
cbaud += 15;
}
- return baud_table[cbaud];
+ return cbaud >= n_baud_table ? 0 : baud_table[cbaud];
#else /* IBSHIFT */
return tty_termios_baud_rate(termios);
#endif /* IBSHIFT */
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit 15035388439f892017d38b05214d3cda6578af64 upstream.
When running function tracing on a Linux guest running on VMware
Workstation, the guest would crash. This is due to tracing of the
sched_clock internal call of the VMware vmware_sched_clock(), which
causes an infinite recursion within the tracing code (clock calls must
not be traced).
Make vmware_sched_clock() not traced by ftrace.
Fixes: 80e9a4f21fd7c ("x86/vmware: Add paravirt sched clock")
Reported-by: GwanYeong Kim <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
CC: Alok Kataria <[email protected]>
CC: GwanYeong Kim <[email protected]>
CC: "H. Peter Anvin" <[email protected]>
CC: Ingo Molnar <[email protected]>
Cc: [email protected]
CC: Thomas Gleixner <[email protected]>
CC: [email protected]
CC: x86-ml <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/vmware.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -77,7 +77,7 @@ static __init int setup_vmw_sched_clock(
}
early_param("no-vmw-sched-clock", setup_vmw_sched_clock);
-static unsigned long long vmware_sched_clock(void)
+static unsigned long long notrace vmware_sched_clock(void)
{
unsigned long long ns;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Mayhew <[email protected]>
commit 01310bb7c9c98752cc763b36532fab028e0f8f81 upstream.
Make sure we have a saved filehandle, otherwise we'll oops with a null
pointer dereference in nfs4_preprocess_stateid_op().
Signed-off-by: Scott Mayhew <[email protected]>
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4proc.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1037,6 +1037,9 @@ nfsd4_verify_copy(struct svc_rqst *rqstp
{
__be32 status;
+ if (!cstate->save_fh.fh_dentry)
+ return nfserr_nofilehandle;
+
status = nfs4_preprocess_stateid_op(rqstp, cstate, &cstate->save_fh,
src_stateid, RD_STATE, src, NULL);
if (status) {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathieu Malaterre <[email protected]>
commit 81bd415c91eb966118d773dddf254aebf3022411 upstream.
The split out of the hard lockup detector exposed two new weak functions,
but no prototypes for them, which triggers the build warning:
kernel/watchdog.c:109:12: warning: no previous prototype for ‘watchdog_nmi_enable’ [-Wmissing-prototypes]
kernel/watchdog.c:115:13: warning: no previous prototype for ‘watchdog_nmi_disable’ [-Wmissing-prototypes]
Add the prototypes.
Fixes: 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file")
Signed-off-by: Mathieu Malaterre <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Babu Moger <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/nmi.h | 2 ++
1 file changed, 2 insertions(+)
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -119,6 +119,8 @@ static inline int hardlockup_detector_pe
void watchdog_nmi_stop(void);
void watchdog_nmi_start(void);
int watchdog_nmi_probe(void);
+int watchdog_nmi_enable(unsigned int cpu);
+void watchdog_nmi_disable(unsigned int cpu);
/**
* touch_nmi_watchdog - restart NMI watchdog timeout.
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leo Yan <[email protected]>
commit d6c9c05fe1eb4b213b183d8a1e79416256dc833a upstream.
Since commit edeb0c90df35 ("perf tools: Stop fallbacking to kallsyms for
vdso symbols lookup"), the kernel address cannot be properly parsed to
kernel symbol with command 'perf script -k vmlinux'. The reason is
CoreSight samples is always to set CPU mode as PERF_RECORD_MISC_USER,
thus it fails to find corresponding map/dso in below flows:
process_sample_event()
`-> machine__resolve()
`-> thread__find_map(thread, sample->cpumode, sample->ip, al);
In this flow it needs to pass argument 'sample->cpumode' to tell what's
the CPU mode, before it always passed PERF_RECORD_MISC_USER but without
any failure until the commit edeb0c90df35 ("perf tools: Stop fallbacking
to kallsyms for vdso symbols lookup") has been merged. The reason is
even with the wrong CPU mode the function thread__find_map() firstly
fails to find map but it will rollback to find kernel map for vdso
symbols lookup. In the latest code it has removed the fallback code,
thus if CPU mode is PERF_RECORD_MISC_USER then it cannot find map
anymore with kernel address.
This patch is to correct samples CPU mode setting, it creates a new
helper function cs_etm__cpu_mode() to tell what's the CPU mode based on
the address with the info from machine structure; this patch has a bit
extension to check not only kernel and user mode, but also check for
host/guest and hypervisor mode. Finally this patch uses the function in
instruction and branch samples and also apply in cs_etm__mem_access()
for a minor polishing.
Signed-off-by: Leo Yan <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Miller <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] # v4.19
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/cs-etm.c | 39 ++++++++++++++++++++++++++++++---------
1 file changed, 30 insertions(+), 9 deletions(-)
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -244,6 +244,27 @@ static void cs_etm__free(struct perf_ses
zfree(&aux);
}
+static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
+{
+ struct machine *machine;
+
+ machine = etmq->etm->machine;
+
+ if (address >= etmq->etm->kernel_start) {
+ if (machine__is_host(machine))
+ return PERF_RECORD_MISC_KERNEL;
+ else
+ return PERF_RECORD_MISC_GUEST_KERNEL;
+ } else {
+ if (machine__is_host(machine))
+ return PERF_RECORD_MISC_USER;
+ else if (perf_guest)
+ return PERF_RECORD_MISC_GUEST_USER;
+ else
+ return PERF_RECORD_MISC_HYPERVISOR;
+ }
+}
+
static u32 cs_etm__mem_access(struct cs_etm_queue *etmq, u64 address,
size_t size, u8 *buffer)
{
@@ -258,10 +279,7 @@ static u32 cs_etm__mem_access(struct cs_
return -1;
machine = etmq->etm->machine;
- if (address >= etmq->etm->kernel_start)
- cpumode = PERF_RECORD_MISC_KERNEL;
- else
- cpumode = PERF_RECORD_MISC_USER;
+ cpumode = cs_etm__cpu_mode(etmq, address);
thread = etmq->thread;
if (!thread) {
@@ -653,7 +671,7 @@ static int cs_etm__synth_instruction_sam
struct perf_sample sample = {.ip = 0,};
event->sample.header.type = PERF_RECORD_SAMPLE;
- event->sample.header.misc = PERF_RECORD_MISC_USER;
+ event->sample.header.misc = cs_etm__cpu_mode(etmq, addr);
event->sample.header.size = sizeof(struct perf_event_header);
sample.ip = addr;
@@ -665,7 +683,7 @@ static int cs_etm__synth_instruction_sam
sample.cpu = etmq->packet->cpu;
sample.flags = 0;
sample.insn_len = 1;
- sample.cpumode = event->header.misc;
+ sample.cpumode = event->sample.header.misc;
if (etm->synth_opts.last_branch) {
cs_etm__copy_last_branch_rb(etmq);
@@ -706,12 +724,15 @@ static int cs_etm__synth_branch_sample(s
u64 nr;
struct branch_entry entries;
} dummy_bs;
+ u64 ip;
+
+ ip = cs_etm__last_executed_instr(etmq->prev_packet);
event->sample.header.type = PERF_RECORD_SAMPLE;
- event->sample.header.misc = PERF_RECORD_MISC_USER;
+ event->sample.header.misc = cs_etm__cpu_mode(etmq, ip);
event->sample.header.size = sizeof(struct perf_event_header);
- sample.ip = cs_etm__last_executed_instr(etmq->prev_packet);
+ sample.ip = ip;
sample.pid = etmq->pid;
sample.tid = etmq->tid;
sample.addr = cs_etm__first_executed_instr(etmq->packet);
@@ -720,7 +741,7 @@ static int cs_etm__synth_branch_sample(s
sample.period = 1;
sample.cpu = etmq->packet->cpu;
sample.flags = 0;
- sample.cpumode = PERF_RECORD_MISC_USER;
+ sample.cpumode = event->sample.header.misc;
/*
* perf report cannot handle events without a branch stack
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 7ce9a992ffde8ce93d5ae5767362a5c7389ae895 upstream.
Fix an issue with the 32-bit range error path in `rtc_hctosys' where no
error code is set and consequently the successful preceding call result
from `rtc_read_time' is propagated to `rtc_hctosys_ret'. This in turn
makes any subsequent call to `hctosys_show' incorrectly report in sysfs
that the system time has been set from this RTC while it has not.
Set the error to ERANGE then if we can't express the result due to an
overflow.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: b3a5ac42ab18 ("rtc: hctosys: Ensure system time doesn't overflow time_t")
Cc: [email protected] # 4.17+
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/hctosys.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/rtc/hctosys.c
+++ b/drivers/rtc/hctosys.c
@@ -50,8 +50,10 @@ static int __init rtc_hctosys(void)
tv64.tv_sec = rtc_tm_to_time64(&tm);
#if BITS_PER_LONG == 32
- if (tv64.tv_sec > INT_MAX)
+ if (tv64.tv_sec > INT_MAX) {
+ err = -ERANGE;
goto err_read;
+ }
#endif
err = do_settimeofday64(&tv64);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit 7fabaf303458fcabb694999d6fa772cc13d4e217 upstream.
fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted). Don't leak request reference in this
case. Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.
Fixes: 2d45ba381a74 ("fuse: add retrieve request")
Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests")
Reported-and-tested-by: [email protected]
Signed-off-by: Miklos Szeredi <[email protected]>
Cc: <[email protected]> #v2.6.36
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1724,8 +1724,10 @@ static int fuse_retrieve(struct fuse_con
req->in.args[1].size = total_len;
err = fuse_request_send_notify_reply(fc, req, outarg->notify_unique);
- if (err)
+ if (err) {
fuse_retrieve_end(fc, req);
+ fuse_put_request(fc, req);
+ }
return err;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robbie Ko <[email protected]>
commit 506481b20e818db40b6198815904ecd2d6daee64 upstream.
When the cow_file_range fails, the related resources are unlocked
according to the range [start..end), so the unlock cannot be repeated in
run_delalloc_nocow.
In some cases (e.g. cur_offset <= end && cow_start != -1), cur_offset is
not updated correctly, so move the cur_offset update before
cow_file_range.
kernel BUG at mm/page-writeback.c:2663!
Internal error: Oops - BUG: 0 [#1] SMP
CPU: 3 PID: 31525 Comm: kworker/u8:7 Tainted: P O
Hardware name: Realtek_RTD1296 (DT)
Workqueue: writeback wb_workfn (flush-btrfs-1)
task: ffffffc076db3380 ti: ffffffc02e9ac000 task.ti: ffffffc02e9ac000
PC is at clear_page_dirty_for_io+0x1bc/0x1e8
LR is at clear_page_dirty_for_io+0x14/0x1e8
pc : [<ffffffc00033c91c>] lr : [<ffffffc00033c774>] pstate: 40000145
sp : ffffffc02e9af4f0
Process kworker/u8:7 (pid: 31525, stack limit = 0xffffffc02e9ac020)
Call trace:
[<ffffffc00033c91c>] clear_page_dirty_for_io+0x1bc/0x1e8
[<ffffffbffc514674>] extent_clear_unlock_delalloc+0x1e4/0x210 [btrfs]
[<ffffffbffc4fb168>] run_delalloc_nocow+0x3b8/0x948 [btrfs]
[<ffffffbffc4fb948>] run_delalloc_range+0x250/0x3a8 [btrfs]
[<ffffffbffc514c0c>] writepage_delalloc.isra.21+0xbc/0x1d8 [btrfs]
[<ffffffbffc516048>] __extent_writepage+0xe8/0x248 [btrfs]
[<ffffffbffc51630c>] extent_write_cache_pages.isra.17+0x164/0x378 [btrfs]
[<ffffffbffc5185a8>] extent_writepages+0x48/0x68 [btrfs]
[<ffffffbffc4f5828>] btrfs_writepages+0x20/0x30 [btrfs]
[<ffffffc00033d758>] do_writepages+0x30/0x88
[<ffffffc0003ba0f4>] __writeback_single_inode+0x34/0x198
[<ffffffc0003ba6c4>] writeback_sb_inodes+0x184/0x3c0
[<ffffffc0003ba96c>] __writeback_inodes_wb+0x6c/0xc0
[<ffffffc0003bac20>] wb_writeback+0x1b8/0x1c0
[<ffffffc0003bb0f0>] wb_workfn+0x150/0x250
[<ffffffc0002b0014>] process_one_work+0x1dc/0x388
[<ffffffc0002b02f0>] worker_thread+0x130/0x500
[<ffffffc0002b6344>] kthread+0x10c/0x110
[<ffffffc000284590>] ret_from_fork+0x10/0x40
Code: d503201f a9025bb5 a90363b7 f90023b9 (d4210000)
CC: [email protected] # 4.4+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Robbie Ko <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1532,12 +1532,11 @@ out_check:
}
btrfs_release_path(path);
- if (cur_offset <= end && cow_start == (u64)-1) {
+ if (cur_offset <= end && cow_start == (u64)-1)
cow_start = cur_offset;
- cur_offset = end;
- }
if (cow_start != (u64)-1) {
+ cur_offset = end;
ret = cow_file_range(inode, locked_page, cow_start, end, end,
page_started, nr_written, 1, NULL);
if (ret)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Gruenbacher <[email protected]>
commit 10283ea525d30f2e99828978fd04d8427876a7ad upstream.
gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects
attached to the resource group glocks. That function should release the
buffers attached to the gfs2_bitmap objects (bi_bh), but the call to
gfs2_rgrp_brelse for doing that is missing.
When gfs2_releasepage later runs across these buffers which are still
referenced, it refuses to free them. This causes the pages the buffers
are attached to to remain referenced as well. With enough mount/unmount
cycles, the system will eventually run out of memory.
Fix this by adding the missing call to gfs2_rgrp_brelse in
gfs2_clear_rgrpd.
(Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.)
Fixes: 39b0f1e92908 ("GFS2: Don't brelse rgrp buffer_heads every allocation")
Cc: [email protected] # v4.2+
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/rgrp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -725,6 +725,7 @@ void gfs2_clear_rgrpd(struct gfs2_sbd *s
if (gl) {
glock_clear_object(gl, rgd);
+ gfs2_rgrp_brelse(rgd);
gfs2_glock_put(gl);
}
@@ -1141,7 +1142,7 @@ static u32 count_unlinked(struct gfs2_rg
* @rgd: the struct gfs2_rgrpd describing the RG to read in
*
* Read in all of a Resource Group's header and bitmap blocks.
- * Caller must eventually call gfs2_rgrp_relse() to free the bitmaps.
+ * Caller must eventually call gfs2_rgrp_brelse() to free the bitmaps.
*
* Returns: errno
*/
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Gruenbacher <[email protected]>
commit e7445ceddfc220c1aede6d42758a5acb8844e9c3 upstream.
The previous attempt to fix for metadata read-ahead during truncate was
incorrect: for files with a height > 2 (1006989312 bytes with a block
size of 4096 bytes), read-ahead requests were not being issued for some
of the indirect blocks discovered while walking the metadata tree,
leading to significant slow-downs when deleting large files. Fix that.
In addition, only issue read-ahead requests in the first pass through
the meta-data tree, while deallocating data blocks.
Fixes: c3ce5aa9b0 ("gfs2: Fix metadata read-ahead during truncate")
Cc: [email protected] # v4.16+
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/bmap.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1908,10 +1908,16 @@ static int punch_hole(struct gfs2_inode
if (ret < 0)
goto out;
- /* issue read-ahead on metadata */
- if (mp.mp_aheight > 1) {
- for (; ret > 1; ret--) {
- metapointer_range(&mp, mp.mp_aheight - ret,
+ /* On the first pass, issue read-ahead on metadata. */
+ if (mp.mp_aheight > 1 && strip_h == ip->i_height - 1) {
+ unsigned int height = mp.mp_aheight - 1;
+
+ /* No read-ahead for data blocks. */
+ if (mp.mp_aheight - 1 == strip_h)
+ height--;
+
+ for (; height >= mp.mp_aheight - ret; height--) {
+ metapointer_range(&mp, height,
start_list, start_aligned,
end_list, end_aligned,
&start, &end);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Khoruzhick <[email protected]>
commit f393808dc64149ccd0e5a8427505ba2974a59854 upstream.
If there's no entry to drop in bucket that corresponds to the hash,
early_drop() should look for it in other buckets. But since it increments
hash instead of bucket number, it actually looks in the same bucket 8
times: hsize is 16k by default (14 bits) and hash is 32-bit value, so
reciprocal_scale(hash, hsize) returns the same value for hash..hash+7 in
most cases.
Fix it by increasing bucket number instead of hash and rename _hash
to bucket to avoid future confusion.
Fixes: 3e86638e9a0b ("netfilter: conntrack: consider ct netns in early_drop logic")
Cc: <[email protected]> # v4.7+
Signed-off-by: Vasily Khoruzhick <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_conntrack_core.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1073,19 +1073,22 @@ static unsigned int early_drop_list(stru
return drops;
}
-static noinline int early_drop(struct net *net, unsigned int _hash)
+static noinline int early_drop(struct net *net, unsigned int hash)
{
- unsigned int i;
+ unsigned int i, bucket;
for (i = 0; i < NF_CT_EVICTION_RANGE; i++) {
struct hlist_nulls_head *ct_hash;
- unsigned int hash, hsize, drops;
+ unsigned int hsize, drops;
rcu_read_lock();
nf_conntrack_get_ht(&ct_hash, &hsize);
- hash = reciprocal_scale(_hash++, hsize);
+ if (!i)
+ bucket = reciprocal_scale(hash, hsize);
+ else
+ bucket = (bucket + 1) % hsize;
- drops = early_drop_list(net, &ct_hash[hash]);
+ drops = early_drop_list(net, &ct_hash[bucket]);
rcu_read_unlock();
if (drops) {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 873d7bcfd066663e3e50113dc4a0de19289b6354 upstream.
Commit a2468cc9bfdf ("swap: choose swap device according to numa node")
changed 'avail_lists' field of 'struct swap_info_struct' to an array.
In popular linux distros it increased size of swap_info_struct up to 40
Kbytes and now swap_info_struct allocation requires order-4 page.
Switch to kvzmalloc allows to avoid unexpected allocation failures.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: a2468cc9bfdf ("swap: choose swap device according to numa node")
Signed-off-by: Vasily Averin <[email protected]>
Acked-by: Aaron Lu <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/swapfile.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2820,7 +2820,7 @@ static struct swap_info_struct *alloc_sw
unsigned int type;
int i;
- p = kzalloc(sizeof(*p), GFP_KERNEL);
+ p = kvzalloc(sizeof(*p), GFP_KERNEL);
if (!p)
return ERR_PTR(-ENOMEM);
@@ -2831,7 +2831,7 @@ static struct swap_info_struct *alloc_sw
}
if (type >= MAX_SWAPFILES) {
spin_unlock(&swap_lock);
- kfree(p);
+ kvfree(p);
return ERR_PTR(-EPERM);
}
if (type >= nr_swapfiles) {
@@ -2845,7 +2845,7 @@ static struct swap_info_struct *alloc_sw
smp_wmb();
nr_swapfiles++;
} else {
- kfree(p);
+ kvfree(p);
p = swap_info[type];
/*
* Do not memset this entry: a racing procfs swap_next()
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 9e4028935cca3f9ef9b6a90df9da6f1f94853536 upstream.
Currently bh is set to NULL only during first iteration of for cycle,
then this pointer is not cleared after end of using.
Therefore rollback after errors can lead to extra brelse(bh) call,
decrements bh counter and later trigger an unexpected warning in __brelse()
Patch moves brelse() calls in body of cycle to exclude requirement of
brelse() call in rollback.
Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.3+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -607,7 +607,6 @@ handle_bb:
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
- bh = NULL;
goto out;
}
overhead = ext4_group_overhead_blocks(sb, group);
@@ -620,9 +619,9 @@ handle_bb:
ext4_mark_bitmap_end(EXT4_B2C(sbi, group_data[i].blocks_count),
sb->s_blocksize * 8, bh->b_data);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (err)
goto out;
- brelse(bh);
handle_ib:
if (bg_flags[i] & EXT4_BG_INODE_UNINIT)
@@ -637,18 +636,16 @@ handle_ib:
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
- bh = NULL;
goto out;
}
ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb),
sb->s_blocksize * 8, bh->b_data);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (err)
goto out;
- brelse(bh);
}
- bh = NULL;
/* Mark group tables in block bitmap */
for (j = 0; j < GROUP_TABLE_COUNT; j++) {
@@ -687,7 +684,6 @@ handle_ib:
}
out:
- brelse(bh);
err2 = ext4_journal_stop(handle);
if (err2 && !err)
err = err2;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit 72a58a63a164b4e9d2d914e65caeb551846883f1 upstream.
Commit:
24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
increased the allocation size for the FDT image created by the stub to a
fixed value of 2 MB, to simplify the former code that made several
attempts with increasing values for the size. This is reasonable
given that the allocation is of type EFI_LOADER_DATA, which is released
to the kernel unless it is explicitly memblock_reserve()d by the early
boot code.
However, this allocation size leaked into the 'size' field of the FDT
header metadata, and so the entire allocation remains occupied by the
device tree binary, even if most of it is not used to store device tree
information.
So call fdt_pack() to shrink the FDT data structure to its minimum size
after populating all the fields, so that the remaining memory is no
longer wasted.
Signed-off-by: Ard Biesheuvel <[email protected]>
Cc: <[email protected]> # v4.12+
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/libstub/fdt.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/firmware/efi/libstub/fdt.c
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -158,6 +158,10 @@ static efi_status_t update_fdt(efi_syste
return efi_status;
}
}
+
+ /* shrink the FDT back to its minimum size */
+ fdt_pack(fdt);
+
return EFI_SUCCESS;
fdt_set_fail:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shaokun Zhang <[email protected]>
commit 761333f2f50ccc887aa9957ae829300262c0d15b upstream.
block_group_err shows the group system as a decimal value with a '0x'
prefix, which is somewhat misleading.
Fix it to print hexadecimal, as was intended.
Fixes: fce466eab7ac6 ("btrfs: tree-checker: Verify block_group_item")
CC: [email protected] # 4.19+
Reviewed-by: Nikolay Borisov <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Shaokun Zhang <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-checker.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/tree-checker.c
+++ b/fs/btrfs/tree-checker.c
@@ -440,7 +440,7 @@ static int check_block_group_item(struct
type != (BTRFS_BLOCK_GROUP_METADATA |
BTRFS_BLOCK_GROUP_DATA)) {
block_group_err(fs_info, leaf, slot,
-"invalid type, have 0x%llx (%lu bits set) expect either 0x%llx, 0x%llx, 0x%llu or 0x%llx",
+"invalid type, have 0x%llx (%lu bits set) expect either 0x%llx, 0x%llx, 0x%llx or 0x%llx",
type, hweight64(type),
BTRFS_BLOCK_GROUP_DATA, BTRFS_BLOCK_GROUP_METADATA,
BTRFS_BLOCK_GROUP_SYSTEM,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <[email protected]>
commit 582f58de36834096a91cc1de2540c2f7269f850d upstream.
Currently we return NOTIFY_DONE for any event which we don't think is
ours. However, many laptops will send more then just an ATIF event and
will also send an ACPI_VIDEO_NOTIFY_PROBE event as well. Since we don't
check for this, we return NOTIFY_DONE which causes a keypress for the
ACPI event to be propogated to userspace. This is the equivalent of
someone pressing the display key on a laptop every time there's a
hotplug event.
So, check for ACPI_VIDEO_NOTIFY_PROBE events and suppress keypresses
from them.
Signed-off-by: Lyude Paul <[email protected]>
Cc: [email protected]
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
@@ -358,7 +358,9 @@ out:
*
* Checks the acpi event and if it matches an atif event,
* handles it.
- * Returns NOTIFY code
+ *
+ * Returns:
+ * NOTIFY_BAD or NOTIFY_DONE, depending on the event.
*/
static int amdgpu_atif_handler(struct amdgpu_device *adev,
struct acpi_bus_event *event)
@@ -372,11 +374,16 @@ static int amdgpu_atif_handler(struct am
if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0)
return NOTIFY_DONE;
+ /* Is this actually our event? */
if (!atif ||
!atif->notification_cfg.enabled ||
- event->type != atif->notification_cfg.command_code)
- /* Not our event */
- return NOTIFY_DONE;
+ event->type != atif->notification_cfg.command_code) {
+ /* These events will generate keypresses otherwise */
+ if (event->type == ACPI_VIDEO_NOTIFY_PROBE)
+ return NOTIFY_BAD;
+ else
+ return NOTIFY_DONE;
+ }
if (atif->functions.sbios_requests) {
struct atif_sbios_requests req;
@@ -385,7 +392,7 @@ static int amdgpu_atif_handler(struct am
count = amdgpu_atif_get_sbios_requests(atif, &req);
if (count <= 0)
- return NOTIFY_DONE;
+ return NOTIFY_BAD;
DRM_DEBUG_DRIVER("ATIF: %d pending SBIOS requests\n", count);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit eb6984fa4ce2837dcb1f66720a600f31b0bb3739 upstream.
According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write()
should not return bh = NULL
The only time that bh could be NULL, then, would be in the case of
something really going wrong; a programming error elsewhere (perhaps a
wild pointer dereference) or I/O error causing on-disk file system
corruption (although that would be highly unlikely given that we had
*just* allocated the blocks and so the metadata blocks in question
probably would still be in the cache).
Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 4.13
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/xattr.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1388,6 +1388,12 @@ retry:
bh = ext4_getblk(handle, ea_inode, block, 0);
if (IS_ERR(bh))
return PTR_ERR(bh);
+ if (!bh) {
+ WARN_ON_ONCE(1);
+ EXT4_ERROR_INODE(ea_inode,
+ "ext4_getblk() return bh = NULL");
+ return -EFSCORRUPTED;
+ }
ret = ext4_journal_get_write_access(handle, bh);
if (ret)
goto out;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <[email protected]>
commit 7b0f61e91b6056c71649efa3204112a4b6cf5fc8 upstream.
As mentioned in the previous commit, we currently prevent new modesets
on recently-removed MST connectors by returning no encoder from our
->best_encoder() callback once the MST port has disappeared. This is
wrong however, because it prevents legacy modesetting users from being
able to disable CRTCs on MST connectors after the connector's respective
topology has disappeared.
So, fix this by instead by just always returning a valid encoder.
Changes since v2:
- Remove usage of atomic MST helper for now, since that got replaced
with a much simpler solution
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit e87b0bbc9f0380d403f8f2f6abba0d51c74d944f)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/dispnv50/disp.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -843,22 +843,16 @@ nv50_mstc_atomic_best_encoder(struct drm
{
struct nv50_head *head = nv50_head(connector_state->crtc);
struct nv50_mstc *mstc = nv50_mstc(connector);
- if (mstc->port) {
- struct nv50_mstm *mstm = mstc->mstm;
- return &mstm->msto[head->base.index]->encoder;
- }
- return NULL;
+
+ return &mstc->mstm->msto[head->base.index]->encoder;
}
static struct drm_encoder *
nv50_mstc_best_encoder(struct drm_connector *connector)
{
struct nv50_mstc *mstc = nv50_mstc(connector);
- if (mstc->port) {
- struct nv50_mstm *mstm = mstc->mstm;
- return &mstm->msto[0]->encoder;
- }
- return NULL;
+
+ return &mstc->mstm->msto[0]->encoder;
}
static enum drm_mode_status
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit f348e2241fb73515d65b5d77dd9c174128a7fbf2 upstream.
Fixes: 117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.7
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -2022,7 +2022,7 @@ retry:
err = ext4_alloc_flex_bg_array(sb, n_group + 1);
if (err)
- return err;
+ goto out;
err = ext4_mb_alloc_groupinfo(sb, n_group + 1);
if (err)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Lisovskiy <[email protected]>
commit 23d8003907d094f77cf959228e2248d6db819fa7 upstream.
Unfortunately drm_dp_get_mst_branch_device which is called from both
drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely
on that mgr->mst_primary is not NULL, which seem to be wrong as it can be
cleared with simultaneous mode set, if probing fails or in other case.
mgr->lock mutex doesn't protect against that as it might just get
assigned to NULL right before, not simultaneously.
There are currently bugs 107738, 108616 bugs which crash in
drm_dp_get_mst_branch_device, caused by this issue.
v2: Refactored the code, as it was nicely noticed.
Fixed Bugzilla bug numbers(second was 108616, but not 108816)
and added links.
[changed title and added stable cc]
Signed-off-by: Lyude Paul <[email protected]>
Signed-off-by: Stanislav Lisovskiy <[email protected]>
Cc: [email protected]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -1274,6 +1274,9 @@ static struct drm_dp_mst_branch *drm_dp_
mutex_lock(&mgr->lock);
mstb = mgr->mst_primary;
+ if (!mstb)
+ goto out;
+
for (i = 0; i < lct - 1; i++) {
int shift = (i % 2) ? 0 : 4;
int port_num = (rad[i / 2] >> shift) & 0xf;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <[email protected]>
commit 9e463084cdb22e0b56b2dfbc50461020409a5fd3 upstream.
Fixes: bfe0a5f47ada ("ext4: add more mount time checks of the superblock")
Reported-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 4.18
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4074,6 +4074,14 @@ static int ext4_fill_super(struct super_
sbi->s_groups_count = blocks_count;
sbi->s_blockfile_groups = min_t(ext4_group_t, sbi->s_groups_count,
(EXT4_MAX_BLOCK_FILE_PHYS / EXT4_BLOCKS_PER_GROUP(sb)));
+ if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) !=
+ le32_to_cpu(es->s_inodes_count)) {
+ ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu",
+ le32_to_cpu(es->s_inodes_count),
+ ((u64)sbi->s_groups_count * sbi->s_inodes_per_group));
+ ret = -EINVAL;
+ goto failed_mount;
+ }
db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
EXT4_DESC_PER_BLOCK(sb);
if (ext4_has_feature_meta_bg(sb)) {
@@ -4093,14 +4101,6 @@ static int ext4_fill_super(struct super_
ret = -ENOMEM;
goto failed_mount;
}
- if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) !=
- le32_to_cpu(es->s_inodes_count)) {
- ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu",
- le32_to_cpu(es->s_inodes_count),
- ((u64)sbi->s_groups_count * sbi->s_inodes_per_group));
- ret = -EINVAL;
- goto failed_mount;
- }
bgl_lock_init(sbi->s_blockgroup_lock);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit af18e35bfd01e6d65a5e3ef84ffe8b252d1628c5 upstream.
Fixes: c8585c6fcaf2 ("ext4: fix races between changing inode journal ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 4.7
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4509,6 +4509,7 @@ failed_mount6:
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
percpu_counter_destroy(&sbi->s_dirtyclusters_counter);
+ percpu_free_rwsem(&sbi->s_journal_flag_rwsem);
failed_mount5:
ext4_ext_release(sb);
ext4_release_system_zone(sb);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit ecaaf408478b6fb4d9986f9b6652f3824e374f4c upstream.
Fixes: dec214d00e0d ("ext4: xattr inode deduplication")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 4.13
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/xattr.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2282,8 +2282,10 @@ static struct buffer_head *ext4_xattr_ge
if (!bh)
return ERR_PTR(-EIO);
error = ext4_xattr_check_block(inode, bh);
- if (error)
+ if (error) {
+ brelse(bh);
return ERR_PTR(error);
+ }
return bh;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
commit 0e8afefd5da4875ddea9aa4ad17a2540a2bf9736 upstream.
The Acer One 10 uses a clamshell design with a detachable keyboard.
As such in normal operating mode, with the keyboard attach the device
is in landscape mode (and the Acer logo at boot also shows in landscape
mode).
But the device uses a portrait screen rotated 90 degrees (sigh). This
commit adds a quirk for this device so that we shown the fbcon the
right way up and that we hint userspace to also show e.g. plymouth and
gdm the right way up.
Cc: [email protected]
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -30,6 +30,12 @@ struct drm_dmi_panel_orientation_data {
int orientation;
};
+static const struct drm_dmi_panel_orientation_data acer_s1003 = {
+ .width = 800,
+ .height = 1280,
+ .orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
static const struct drm_dmi_panel_orientation_data asus_t100ha = {
.width = 800,
.height = 1280,
@@ -67,7 +73,13 @@ static const struct drm_dmi_panel_orient
};
static const struct dmi_system_id orientation_data[] = {
- { /* Asus T100HA */
+ { /* Acer One 10 (S1003) */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "One S1003"),
+ },
+ .driver_data = (void *)&acer_s1003,
+ }, { /* Asus T100HA */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 9c8e0a1b683525464a2abe9fb4b54404a50ed2b4 upstream.
Timothy Baldwin <[email protected]> wrote:
> As per mount_namespaces(7) unprivileged users should not be able to look under mount points:
>
> Mounts that come as a single unit from more privileged mount are locked
> together and may not be separated in a less privileged mount namespace.
>
> However they can:
>
> 1. Create a mount namespace.
> 2. In the mount namespace open a file descriptor to the parent of a mount point.
> 3. Destroy the mount namespace.
> 4. Use the file descriptor to look under the mount point.
>
> I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8.
>
> The setup:
>
> $ sudo sysctl kernel.unprivileged_userns_clone=1
> kernel.unprivileged_userns_clone = 1
> $ mkdir -p A/B/Secret
> $ sudo mount -t tmpfs hide A/B
>
>
> "Secret" is indeed hidden as expected:
>
> $ ls -lR A
> A:
> total 0
> drwxrwxrwt 2 root root 40 Feb 12 21:08 B
>
> A/B:
> total 0
>
>
> The attack revealing "Secret":
>
> $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A"
> /proc/self/fd/4/:
> total 0
> drwxr-xr-x 3 root root 60 Feb 12 21:08 B
>
> /proc/self/fd/4/B:
> total 0
> drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret
>
> /proc/self/fd/4/B/Secret:
> total 0
I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and
disconnecting all of the mounts in a mount namespace. Fix this by
factoring drop_mounts out of drop_collected_mounts and passing
0 instead of UMOUNT_SYNC.
There are two possible behavior differences that result from this.
- No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on
the vfsmounts being unmounted. This effects the lazy rcu walk by
kicking the walk out of rcu mode and forcing it to be a non-lazy
walk.
- No longer disconnecting locked mounts will keep some mounts around
longer as they stay because the are locked to other mounts.
There are only two users of drop_collected mounts: audit_tree.c and
put_mnt_ns.
In audit_tree.c the mounts are private and there are no rcu lazy walks
only calls to iterate_mounts. So the changes should have no effect
except for a small timing effect as the connected mounts are disconnected.
In put_mnt_ns there may be references from process outside the mount
namespace to the mounts. So the mounts remaining connected will
be the bug fix that is needed. That rcu walks are allowed to continue
appears not to be a problem especially as the rcu walk change was about
an implementation detail not about semantics.
Cc: [email protected]
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Timothy Baldwin <[email protected]>
Tested-by: Timothy Baldwin <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namespace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1794,7 +1794,7 @@ void drop_collected_mounts(struct vfsmou
{
namespace_lock();
lock_mount_hash();
- umount_tree(real_mount(mnt), UMOUNT_SYNC);
+ umount_tree(real_mount(mnt), 0);
unlock_mount_hash();
namespace_unlock();
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Coddington <[email protected]>
commit 1e9c75fb9c47a75a9aec0cd17db5f6dc36b58e00 upstream.
Since commit ff17fa561a04 ("d_invalidate(): unhash immediately")
immediately unhashes the dentry, we'll never return the mountpoint in
lookup_mountpoint(), which can lead to an unbreakable loop in
d_invalidate().
I have reports of NFS clients getting into this condition after the server
removes an export of an existing mount created through follow_automount(),
but I suspect there are various other ways to produce this problem if we
hunt down users of d_invalidate(). For example, it is possible to get into
this state by using XFS' d_invalidate() call in xfs_vn_unlink():
truncate -s 100m img{1,2}
mkfs.xfs -q -n version=ci img1
mkfs.xfs -q -n version=ci img2
mkdir -p /mnt/xfs
mount img1 /mnt/xfs
mkdir /mnt/xfs/sub1
mount img2 /mnt/xfs/sub1
cat > /mnt/xfs/sub1/foo &
umount -l /mnt/xfs/sub1
mount img2 /mnt/xfs/sub1
mount --make-private /mnt/xfs
mkdir /mnt/xfs/sub2
mount --move /mnt/xfs/sub1 /mnt/xfs/sub2
rmdir /mnt/xfs/sub1
Fix this by moving the check for an unlinked dentry out of the
detach_mounts() path.
Fixes: ff17fa561a04 ("d_invalidate(): unhash immediately")
Cc: [email protected]
Reviewed-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Benjamin Coddington <[email protected]>
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namespace.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -695,9 +695,6 @@ static struct mountpoint *lookup_mountpo
hlist_for_each_entry(mp, chain, m_hash) {
if (mp->m_dentry == dentry) {
- /* might be worth a WARN_ON() */
- if (d_unlinked(dentry))
- return ERR_PTR(-ENOENT);
mp->m_count++;
return mp;
}
@@ -711,6 +708,9 @@ static struct mountpoint *get_mountpoint
int ret;
if (d_mountpoint(dentry)) {
+ /* might be worth a WARN_ON() */
+ if (d_unlinked(dentry))
+ return ERR_PTR(-ENOENT);
mountpoint:
read_seqlock_excl(&mount_lock);
mp = lookup_mountpoint(dentry);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Osipenko <[email protected]>
commit 74e3512731bd5c9673176425a76a7cc5efa8ddb6 upstream.
Fix double-free that happens when thermal zone setup fails, see KASAN log
below.
==================================================================
BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c
CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
Backtrace:
[<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24)
[<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0)
[<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250)
[<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88)
[<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200)
[<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18)
[<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294)
[<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c)
[<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8)
[<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4)
[<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578)
[<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384)
[<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4)
[<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4)
[<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c)
[<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8)
[<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c)
[<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20)
[<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec)
[<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4)
[<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c)
[<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc)
[<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240)
[<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
Exception stack(0xcf743fb0 to 0xcf743ff8)
3fa0: 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Allocated by task 132:
kasan_kmalloc.part.1+0x58/0xf4
kasan_kmalloc+0x90/0xa4
kmem_cache_alloc_trace+0x90/0x2a0
__hwmon_device_register+0xbc/0xa7c
hwmon_device_register_with_info+0xa0/0xa8
devm_hwmon_device_register_with_info+0x74/0xb4
lm90_probe+0x414/0x578
i2c_device_probe+0x35c/0x384
really_probe+0x290/0x3e4
driver_probe_device+0x80/0x1c4
__device_attach_driver+0x104/0x11c
bus_for_each_drv+0xa4/0xc8
__device_attach+0xf0/0x15c
device_initial_probe+0x1c/0x20
bus_probe_device+0xdc/0xec
deferred_probe_work_func+0xa8/0xd4
process_one_work+0x3dc/0x96c
worker_thread+0x4ec/0x8bc
kthread+0x230/0x240
ret_from_fork+0x14/0x38
(null)
Freed by task 132:
__kasan_slab_free+0x12c/0x200
kasan_slab_free+0x14/0x18
kfree+0x90/0x294
hwmon_dev_release+0x1c/0x20
device_release+0x4c/0xe8
kobject_put+0xac/0x11c
device_unregister+0x2c/0x30
__hwmon_device_register+0xa58/0xa7c
hwmon_device_register_with_info+0xa0/0xa8
devm_hwmon_device_register_with_info+0x74/0xb4
lm90_probe+0x414/0x578
i2c_device_probe+0x35c/0x384
really_probe+0x290/0x3e4
driver_probe_device+0x80/0x1c4
__device_attach_driver+0x104/0x11c
bus_for_each_drv+0xa4/0xc8
__device_attach+0xf0/0x15c
device_initial_probe+0x1c/0x20
bus_probe_device+0xdc/0xec
deferred_probe_work_func+0xa8/0xd4
process_one_work+0x3dc/0x96c
worker_thread+0x4ec/0x8bc
kthread+0x230/0x240
ret_from_fork+0x14/0x38
(null)
Cc: <[email protected]> # v4.15+
Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem")
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/hwmon.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -635,8 +635,10 @@ __hwmon_device_register(struct device *d
if (info[i]->config[j] & HWMON_T_INPUT) {
err = hwmon_thermal_add_sensor(dev,
hwdev, j);
- if (err)
- goto free_device;
+ if (err) {
+ device_unregister(hdev);
+ goto ida_remove;
+ }
}
}
}
@@ -644,8 +646,6 @@ __hwmon_device_register(struct device *d
return hdev;
-free_device:
- device_unregister(hdev);
free_hwmon:
kfree(hwdev);
ida_remove:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 45ae932d246f721e6584430017176cbcadfde610 upstream.
bs.bh was taken in previous ext4_xattr_block_find() call,
it should be released before re-using
Fixes: 7e01c8e5420b ("ext3/4: fix uninitialized bs in ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.26
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/xattr.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2405,6 +2405,8 @@ retry_inode:
error = ext4_xattr_block_set(handle, inode, &i, &bs);
} else if (error == -ENOSPC) {
if (EXT4_I(inode)->i_file_acl && !bs.s.base) {
+ brelse(bs.bh);
+ bs.bh = NULL;
error = ext4_xattr_block_find(inode, &i, &bs);
if (error)
goto cleanup;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <[email protected]>
commit f42f343887016330b321dd40eebc68c7292e4f1b upstream.
Let's not leak obj->framebuffer_references when we decide that
the framebuffer domensions are not suitable for NV12.
Cc: [email protected]
Cc: Maarten Lankhorst <[email protected]>
Cc: Vidya Srinivas <[email protected]>
Fixes: e44134f2673c ("drm/i915: Add NV12 support to intel_framebuffer_init")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Matt Roper <[email protected]>
(cherry picked from commit 3b90946fcb6f13b65888c380461793a9dea9d1f4)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_display.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14582,7 +14582,7 @@ static int intel_framebuffer_init(struct
fb->height < SKL_MIN_YUV_420_SRC_H ||
(fb->width % 4) != 0 || (fb->height % 4) != 0)) {
DRM_DEBUG_KMS("src dimensions not correct for NV12\n");
- return -EINVAL;
+ goto err;
}
for (i = 0; i < fb->format->num_planes; i++) {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit 0014868b9c3c1dda1de6711cf58c3486fb422d07 upstream.
Since the flags are being used to operate on a u64 variable, they too
need to be marked as such so that the inverses are full width (and not
zero extended on 32b kernels and bdw+).
Reported-by: Sergii Romantsov <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: [email protected]
Reviewed-by: Lionel Landwerlin <[email protected]>
Reviewed-by: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 83b466b1dc5f0b4d33f0a901e8b00197a8f3582d)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/i915_gem_gtt.h | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -664,20 +664,20 @@ int i915_gem_gtt_insert(struct i915_addr
u64 start, u64 end, unsigned int flags);
/* Flags used by pin/bind&friends. */
-#define PIN_NONBLOCK BIT(0)
-#define PIN_MAPPABLE BIT(1)
-#define PIN_ZONE_4G BIT(2)
-#define PIN_NONFAULT BIT(3)
-#define PIN_NOEVICT BIT(4)
+#define PIN_NONBLOCK BIT_ULL(0)
+#define PIN_MAPPABLE BIT_ULL(1)
+#define PIN_ZONE_4G BIT_ULL(2)
+#define PIN_NONFAULT BIT_ULL(3)
+#define PIN_NOEVICT BIT_ULL(4)
-#define PIN_MBZ BIT(5) /* I915_VMA_PIN_OVERFLOW */
-#define PIN_GLOBAL BIT(6) /* I915_VMA_GLOBAL_BIND */
-#define PIN_USER BIT(7) /* I915_VMA_LOCAL_BIND */
-#define PIN_UPDATE BIT(8)
+#define PIN_MBZ BIT_ULL(5) /* I915_VMA_PIN_OVERFLOW */
+#define PIN_GLOBAL BIT_ULL(6) /* I915_VMA_GLOBAL_BIND */
+#define PIN_USER BIT_ULL(7) /* I915_VMA_LOCAL_BIND */
+#define PIN_UPDATE BIT_ULL(8)
-#define PIN_HIGH BIT(9)
-#define PIN_OFFSET_BIAS BIT(10)
-#define PIN_OFFSET_FIXED BIT(11)
+#define PIN_HIGH BIT_ULL(9)
+#define PIN_OFFSET_BIAS BIT_ULL(10)
+#define PIN_OFFSET_FIXED BIT_ULL(11)
#define PIN_OFFSET_MASK (-I915_GTT_PAGE_SIZE)
#endif
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit fb5bbae9b1333d44023713946fdd28db0cd85751 upstream.
Exercising the gpu reloc path strenuously revealed an issue where the
updated relocations (from MI_STORE_DWORD_IMM) were not being observed
upon execution. After some experiments with adding pipecontrols (a lot
of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe
controls or even the current on), it was discovered that we merely
needed to delay the EMIT_INVALIDATE by several flushes. It is important
to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that
needs the delay as opposed to what one might first expect -- that the
delay is required for the TLB invalidation to take effect (one presumes
to purge any CS buffers) as opposed to a delay after flushing to ensure
the writes have landed before triggering invalidation.
Testcase: igt/gem_tiled_fence_blits
Signed-off-by: Chris Wilson <[email protected]>
Cc: [email protected]
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 55f99bf2a9c331838c981694bc872cd1ec4070b2)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_ringbuffer.c | 38 ++++++++++++++++++++++++++++++--
1 file changed, 36 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -91,6 +91,7 @@ static int
gen4_render_ring_flush(struct i915_request *rq, u32 mode)
{
u32 cmd, *cs;
+ int i;
/*
* read/write caches:
@@ -127,12 +128,45 @@ gen4_render_ring_flush(struct i915_reque
cmd |= MI_INVALIDATE_ISP;
}
- cs = intel_ring_begin(rq, 2);
+ i = 2;
+ if (mode & EMIT_INVALIDATE)
+ i += 20;
+
+ cs = intel_ring_begin(rq, i);
if (IS_ERR(cs))
return PTR_ERR(cs);
*cs++ = cmd;
- *cs++ = MI_NOOP;
+
+ /*
+ * A random delay to let the CS invalidate take effect? Without this
+ * delay, the GPU relocation path fails as the CS does not see
+ * the updated contents. Just as important, if we apply the flushes
+ * to the EMIT_FLUSH branch (i.e. immediately after the relocation
+ * write and before the invalidate on the next batch), the relocations
+ * still fail. This implies that is a delay following invalidation
+ * that is required to reset the caches as opposed to a delay to
+ * ensure the memory is written.
+ */
+ if (mode & EMIT_INVALIDATE) {
+ *cs++ = GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE;
+ *cs++ = i915_ggtt_offset(rq->engine->scratch) |
+ PIPE_CONTROL_GLOBAL_GTT;
+ *cs++ = 0;
+ *cs++ = 0;
+
+ for (i = 0; i < 12; i++)
+ *cs++ = MI_FLUSH;
+
+ *cs++ = GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE;
+ *cs++ = i915_ggtt_offset(rq->engine->scratch) |
+ PIPE_CONTROL_GLOBAL_GTT;
+ *cs++ = 0;
+ *cs++ = 0;
+ }
+
+ *cs++ = cmd;
+
intel_ring_advance(rq, cs);
return 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit 0a823e8fd4fd67726697854578f3584ee3a49b1d upstream.
Ensure that the writes into the context image are completed prior to the
register mmio to trigger execution. Although previously we were assured
by the SDM that all writes are flushed before an uncached memory
transaction (our mmio write to submit the context to HW for execution),
we have empirical evidence to believe that this is not actually the
case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656
References: https://bugs.freedesktop.org/show_bug.cgi?id=108315
References: https://bugs.freedesktop.org/show_bug.cgi?id=106887
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Acked-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Cc: [email protected]
(cherry picked from commit 987abd5c62f92ee4970b45aa077f47949974e615)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_lrc.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -424,7 +424,8 @@ static u64 execlists_update_context(stru
reg_state[CTX_RING_TAIL+1] = intel_ring_set_tail(rq->ring, rq->tail);
- /* True 32b PPGTT with dynamic page allocation: update PDP
+ /*
+ * True 32b PPGTT with dynamic page allocation: update PDP
* registers and point the unallocated PDPs to scratch page.
* PML4 is allocated during ppgtt init, so this is not needed
* in 48-bit mode.
@@ -432,6 +433,17 @@ static u64 execlists_update_context(stru
if (ppgtt && !i915_vm_is_48bit(&ppgtt->vm))
execlists_update_context_pdps(ppgtt, reg_state);
+ /*
+ * Make sure the context image is complete before we submit it to HW.
+ *
+ * Ostensibly, writes (including the WCB) should be flushed prior to
+ * an uncached write such as our mmio register access, the empirical
+ * evidence (esp. on Braswell) suggests that the WC write into memory
+ * may not be visible to the HW prior to the completion of the UC
+ * register write and that we may begin execution from the context
+ * before its image is complete leading to invalid PD chasing.
+ */
+ wmb();
return ce->lrc_desc;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 53692ec074d00589c2cf1d6d17ca76ad0adce6ec upstream.
Fixes: de05ca852679 ("ext4: move call to ext4_error() into ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 4.17
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/xattr.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2708,7 +2708,6 @@ int ext4_expand_extra_isize_ea(struct in
struct ext4_inode *raw_inode, handle_t *handle)
{
struct ext4_xattr_ibody_header *header;
- struct buffer_head *bh;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
static unsigned int mnt_count;
size_t min_offs;
@@ -2749,13 +2748,17 @@ retry:
* EA block can hold new_extra_isize bytes.
*/
if (EXT4_I(inode)->i_file_acl) {
+ struct buffer_head *bh;
+
bh = sb_bread(inode->i_sb, EXT4_I(inode)->i_file_acl);
error = -EIO;
if (!bh)
goto cleanup;
error = ext4_xattr_check_block(inode, bh);
- if (error)
+ if (error) {
+ brelse(bh);
goto cleanup;
+ }
base = BHDR(bh);
end = bh->b_data + bh->b_size;
min_offs = end - base;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ondrej Mosnacek <[email protected]>
commit c138325fb8713472d5a0c3c7258b9131bab40725 upstream.
selinux_sctp_bind_connect() must verify if the address buffer has
sufficient length before accessing the 'sa_family' field. See
__sctp_connect() for a similar check.
The length of the whole address ('len') is already checked in the
callees.
Reported-by: Qian Cai <[email protected]>
Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Cc: <[email protected]> # 4.17+
Cc: Richard Haines <[email protected]>
Signed-off-by: Ondrej Mosnacek <[email protected]>
Tested-by: Qian Cai <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/hooks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -5318,6 +5318,9 @@ static int selinux_sctp_bind_connect(str
addr_buf = address;
while (walk_size < addrlen) {
+ if (walk_size + sizeof(sa_family_t) > addrlen)
+ return -EINVAL;
+
addr = addr_buf;
switch (addr->sa_family) {
case AF_UNSPEC:
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <[email protected]>
commit 7cada4d0b7a0fb813dbc9777fec092e9ed0546e9 upstream.
Plane sanitation needs vblank interrupts (on account of CxSR disable).
So let's restore vblank interrupts earlier.
v2: Make it actually build
v3: Add comment to explain why we need this (Daniel)
Cc: [email protected]
Cc: Dennis <[email protected]>
Tested-by: Dennis <[email protected]>
Tested-by: Peter Nowee <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 68bc30deac625b8be8d3950b30dc93d09a3645f5)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_display.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15446,13 +15446,9 @@ static void intel_sanitize_crtc(struct i
I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
}
- /* restore vblank interrupts to correct state */
- drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
struct intel_plane *plane;
- drm_crtc_vblank_on(&crtc->base);
-
/* Disable everything but the primary plane */
for_each_intel_plane_on_crtc(dev, crtc, plane) {
const struct intel_plane_state *plane_state =
@@ -15803,7 +15799,6 @@ intel_modeset_setup_hw_state(struct drm_
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_i915_private *dev_priv = to_i915(dev);
- enum pipe pipe;
struct intel_crtc *crtc;
struct intel_encoder *encoder;
int i;
@@ -15814,15 +15809,23 @@ intel_modeset_setup_hw_state(struct drm_
/* HW state is read out, now we need to sanitize this mess. */
get_encoder_power_domains(dev_priv);
- intel_sanitize_plane_mapping(dev_priv);
+ /*
+ * intel_sanitize_plane_mapping() may need to do vblank
+ * waits, so we need vblank interrupts restored beforehand.
+ */
+ for_each_intel_crtc(&dev_priv->drm, crtc) {
+ drm_crtc_vblank_reset(&crtc->base);
- for_each_intel_encoder(dev, encoder) {
- intel_sanitize_encoder(encoder);
+ if (crtc->active)
+ drm_crtc_vblank_on(&crtc->base);
}
- for_each_pipe(dev_priv, pipe) {
- crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
+ intel_sanitize_plane_mapping(dev_priv);
+ for_each_intel_encoder(dev, encoder)
+ intel_sanitize_encoder(encoder);
+
+ for_each_intel_crtc(&dev_priv->drm, crtc) {
intel_sanitize_crtc(crtc, ctx);
intel_dump_pipe_config(crtc, crtc->config,
"[setup_hw_state]");
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 1c23b4108d716cc848b38532063a8aca4f86add8 upstream.
gcc-8 complains about the prototype for this function:
lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes]
This is actually a GCC's bug. In GCC internals
__ubsan_handle_builtin_unreachable() declared with both 'noreturn' and
'const' attributes instead of only 'noreturn':
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210
Workaround this by removing the noreturn attribute.
[aryabinin: add information about GCC bug in changelog]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Andrey Ryabinin <[email protected]>
Acked-by: Olof Johansson <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/ubsan.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/lib/ubsan.c
+++ b/lib/ubsan.c
@@ -427,8 +427,7 @@ void __ubsan_handle_shift_out_of_bounds(
EXPORT_SYMBOL(__ubsan_handle_shift_out_of_bounds);
-void __noreturn
-__ubsan_handle_builtin_unreachable(struct unreachable_data *data)
+void __ubsan_handle_builtin_unreachable(struct unreachable_data *data)
{
unsigned long flags;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dhinakaran Pandiyan <[email protected]>
commit f9776280c29e77a18cbc7ebb6d48f7885e494990 upstream.
Commit '3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check,
unconditionally during long pulse"")' applies a work around for sinks
that don't signal link loss. The work around does not need to have to be
that broad as the issue was seen with only one particular monitor; limit
this only for external displays as eDP features like PSR turn off the link
and the driver ends up retraining the link seeeing that link is not
synchronized.
Cc: Lyude Paul <[email protected]>
Cc: Jan-Marek Glogowski <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
References: 3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f24f6eb95807bca0dbd8dc5b2f3a4099000f4472)
Fixes: 399334708b4f ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Cc: [email protected]
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_dp.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4739,12 +4739,13 @@ intel_dp_long_pulse(struct intel_connect
*/
status = connector_status_disconnected;
goto out;
- } else {
- /*
- * Some external monitors do not signal loss of link
- * synchronization with an IRQ_HPD, so force a link status
- * check.
- */
+ }
+
+ /*
+ * Some external monitors do not signal loss of link synchronization
+ * with an IRQ_HPD, so force a link status check.
+ */
+ if (!intel_dp_is_edp(intel_dp)) {
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
intel_dp_retrain_link(encoder, ctx);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Clint Taylor <[email protected]>
commit 6503493145cba4413ecd3d4d153faeef4a1e9b85 upstream.
HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value
mode instead of HDMI specification values.
V2: Fix 88.2 Hz N value
Cc: Jani Nikula <[email protected]>
Cc: [email protected]
Signed-off-by: Clint Taylor <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 5a400aa3c562c4a726b4da286e63c96db905ade1)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_audio.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -144,6 +144,9 @@ static const struct {
/* HDMI N/CTS table */
#define TMDS_297M 297000
#define TMDS_296M 296703
+#define TMDS_594M 594000
+#define TMDS_593M 593407
+
static const struct {
int sample_rate;
int clock;
@@ -164,6 +167,20 @@ static const struct {
{ 176400, TMDS_297M, 18816, 247500 },
{ 192000, TMDS_296M, 23296, 281250 },
{ 192000, TMDS_297M, 20480, 247500 },
+ { 44100, TMDS_593M, 8918, 937500 },
+ { 44100, TMDS_594M, 9408, 990000 },
+ { 48000, TMDS_593M, 5824, 562500 },
+ { 48000, TMDS_594M, 6144, 594000 },
+ { 32000, TMDS_593M, 5824, 843750 },
+ { 32000, TMDS_594M, 3072, 445500 },
+ { 88200, TMDS_593M, 17836, 937500 },
+ { 88200, TMDS_594M, 18816, 990000 },
+ { 96000, TMDS_593M, 11648, 562500 },
+ { 96000, TMDS_594M, 12288, 594000 },
+ { 176400, TMDS_593M, 35672, 937500 },
+ { 176400, TMDS_594M, 37632, 990000 },
+ { 192000, TMDS_593M, 23296, 562500 },
+ { 192000, TMDS_594M, 24576, 594000 },
};
/* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lucas Stach <[email protected]>
commit 6fce3a406108ee6c8a61e2a33e52e9198a626ea0 upstream.
The GPU hardware fences and the job out-fences are on different timelines
so it's wrong to compare them. Fix this by only looking at the out-fence.
Cc: <[email protected]>
Fixes: 2c83a726d6fb (drm/etnaviv: bring back progress check in job
timeout handler)
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/etnaviv/etnaviv_sched.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
@@ -93,7 +93,7 @@ static void etnaviv_sched_timedout_job(s
* If the GPU managed to complete this jobs fence, the timout is
* spurious. Bail out.
*/
- if (fence_completed(gpu, submit->out_fence->seqno))
+ if (dma_fence_is_signaled(submit->out_fence))
return;
/*
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulf Hansson <[email protected]>
commit 763f191af51f127cf8e69cd361f50bf6180768a5 upstream.
There's no point to register the cpuidle driver for the current CPU, when
the initialization of the arch specific back-end data fails by returning
-ENXIO.
Instead, let's re-order the sequence to its original flow, by first trying
to initialize the back-end part and then act accordingly on the returned
error code. Additionally, let's print the error message, no matter of what
error code that was returned.
Fixes: a0d46a3dfdc3 (ARM: cpuidle: Register per cpuidle device)
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Cc: 4.19+ <[email protected]> # v4.19+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpuidle/cpuidle-arm.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
--- a/drivers/cpuidle/cpuidle-arm.c
+++ b/drivers/cpuidle/cpuidle-arm.c
@@ -103,13 +103,6 @@ static int __init arm_idle_init_cpu(int
goto out_kfree_drv;
}
- ret = cpuidle_register_driver(drv);
- if (ret) {
- if (ret != -EBUSY)
- pr_err("Failed to register cpuidle driver\n");
- goto out_kfree_drv;
- }
-
/*
* Call arch CPU operations in order to initialize
* idle states suspend back-end specific data
@@ -117,15 +110,20 @@ static int __init arm_idle_init_cpu(int
ret = arm_cpuidle_init(cpu);
/*
- * Skip the cpuidle device initialization if the reported
+ * Allow the initialization to continue for other CPUs, if the reported
* failure is a HW misconfiguration/breakage (-ENXIO).
*/
- if (ret == -ENXIO)
- return 0;
-
if (ret) {
pr_err("CPU %d failed to init idle CPU ops\n", cpu);
- goto out_unregister_drv;
+ ret = ret == -ENXIO ? 0 : ret;
+ goto out_kfree_drv;
+ }
+
+ ret = cpuidle_register_driver(drv);
+ if (ret) {
+ if (ret != -EBUSY)
+ pr_err("Failed to register cpuidle driver\n");
+ goto out_kfree_drv;
}
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <[email protected]>
commit 6a8915d0f8cf323e1beb792a33095cf652db4056 upstream.
We deinit the lpe audio device before we call
drm_atomic_helper_shutdown(), which means the platform device
may already be gone when it comes time to shut down the crtc.
As we don't know when the last reference to the platform
device gets dropped by the audio driver we can't assume that
the device and its data are still around when turning off the
crtc. Mark the platform device as gone as soon as we do the
audio deinit.
Cc: [email protected]
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
(cherry picked from commit f45a7977d1140c11f334e01a9f77177ed68e3bfa)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_lpe_audio.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/intel_lpe_audio.c
+++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
@@ -297,8 +297,10 @@ void intel_lpe_audio_teardown(struct drm
lpe_audio_platdev_destroy(dev_priv);
irq_free_desc(dev_priv->lpe_audio.irq);
-}
+ dev_priv->lpe_audio.irq = -1;
+ dev_priv->lpe_audio.platdev = NULL;
+}
/**
* intel_lpe_audio_notify() - notify lpe audio event
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <[email protected]>
commit 541ff7e96c13cd5d67f6021d233f8e1c3df49278 upstream.
Turns out that if you trigger an HPD storm on a system that has an MST
topology connected to it, you'll end up causing the kernel to eventually
hit a NULL deref:
[ 332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec
[ 332.340906] PGD 0 P4D 0
[ 332.342750] Oops: 0000 [#1] SMP PTI
[ 332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G O 4.18.0-rc3short-hpd-storm+ #2
[ 332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[ 332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915]
[ 332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915]
[ 332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41
[ 332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006
[ 332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006
[ 332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570
[ 332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840
[ 332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20
[ 332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a
[ 332.366615] FS: 0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000
[ 332.368658] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0
[ 332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 332.376798] Call Trace:
[ 332.378809] process_one_work+0x1a1/0x350
[ 332.380806] worker_thread+0x30/0x380
[ 332.382777] ? wq_update_unbound_numa+0x10/0x10
[ 332.384772] kthread+0x112/0x130
[ 332.386740] ? kthread_create_worker_on_cpu+0x70/0x70
[ 332.388706] ret_from_fork+0x35/0x40
[ 332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915]
[ 332.394963] CR2: 00000000000000ec
This appears to be due to the fact that with an MST topology, not all
intel_connector structs will have ->encoder set. So, fix this by
skipping connectors without encoders in
intel_hpd_irq_storm_reenable_work().
For those wondering, this bug was found on accident while simulating HPD
storms using a Chamelium connected to a ThinkPad T450s (Broadwell).
Changes since v1:
- Check intel_connector->mst_port instead of intel_connector->encoder
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Cc: [email protected]
Cc: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit fee61deecb1d850bf34f682a6a452e5ee51b7572)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_hotplug.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -228,7 +228,9 @@ static void intel_hpd_irq_storm_reenable
drm_for_each_connector_iter(connector, &conn_iter) {
struct intel_connector *intel_connector = to_intel_connector(connector);
- if (intel_connector->encoder->hpd_pin == pin) {
+ /* Don't check MST ports, they don't have pins */
+ if (!intel_connector->mst_port &&
+ intel_connector->encoder->hpd_pin == pin) {
if (connector->polled != intel_connector->polled)
DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
connector->name);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dhinakaran Pandiyan <[email protected]>
commit 49af5d95b9b3c21a84ad115a9db9acbc036d849a upstream.
Comment claims link needs to be retrained because the connected sink raised
a long pulse to indicate link loss. If the sink did so,
intel_dp_hotplug() would have handled link retraining. Looking at the
logs in Bugzilla referenced in commit '3cf71bc9904d ("drm/i915: Re-apply
Perform link quality check, unconditionally during long pulse"")', the
issue is that the sink does not trigger an interrupt. What we want is
->detect() from user space to check link status and retrain. Ville's
review for the original patch also indicates the same root cause. So,
rewrite the comment.
v2: Patch split and rewrote comment.
Cc: Lyude Paul <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Jan-Marek Glogowski <[email protected]>
References: 3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9ebd8202393dde9d3678c9ec162c1aa63ba17eac)
Fixes: 399334708b4f ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Cc: [email protected]
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_dp.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4741,16 +4741,9 @@ intel_dp_long_pulse(struct intel_connect
goto out;
} else {
/*
- * If display is now connected check links status,
- * there has been known issues of link loss triggering
- * long pulse.
- *
- * Some sinks (eg. ASUS PB287Q) seem to perform some
- * weird HPD ping pong during modesets. So we can apparently
- * end up with HPD going low during a modeset, and then
- * going back up soon after. And once that happens we must
- * retrain the link to get a picture. That's in case no
- * userspace component reacted to intermittent HPD dip.
+ * Some external monitors do not signal loss of link
+ * synchronization with an IRQ_HPD, so force a link status
+ * check.
*/
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefano Stabellini <[email protected]>
commit f9005571701920551bcf54a500973fb61f2e1eda upstream.
xen_create_contiguous_region has now only an implementation if
CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but
we do have an implementation of xen_create_contiguous_region which is
required for swiotlb-xen to work correctly (although it just sets
*dma_handle).
[backport: remove change to xen_remap_pfn]
Cc: <[email protected]> # 4.12
Fixes: 16624390816c ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds")
Signed-off-by: Stefano Stabellini <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/xen/xen-ops.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/xen/xen-ops.h
+++ b/include/xen/xen-ops.h
@@ -41,7 +41,7 @@ int xen_setup_shutdown_event(void);
extern unsigned long *xen_contiguous_bitmap;
-#ifdef CONFIG_XEN_PV
+#if defined(CONFIG_XEN_PV) || defined(CONFIG_ARM) || defined(CONFIG_ARM64)
int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
unsigned int address_bits,
dma_addr_t *dma_handle);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit ab0d6a141843e0b4b2709dfd37b53468b5452c3a upstream.
Handle integer overflow when computing the sub-page length for shmem
backed pread/pwrite.
Reported-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: [email protected]
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a5e856a5348f6cd50889d125c40bbeec7328e466)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/i915_gem.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1122,11 +1122,7 @@ i915_gem_shmem_pread(struct drm_i915_gem
offset = offset_in_page(args->offset);
for (idx = args->offset >> PAGE_SHIFT; remain; idx++) {
struct page *page = i915_gem_object_get_page(obj, idx);
- int length;
-
- length = remain;
- if (offset + length > PAGE_SIZE)
- length = PAGE_SIZE - offset;
+ unsigned int length = min_t(u64, remain, PAGE_SIZE - offset);
ret = shmem_pread(page, offset, length, user_data,
page_to_phys(page) & obj_do_bit17_swizzling,
@@ -1570,11 +1566,7 @@ i915_gem_shmem_pwrite(struct drm_i915_ge
offset = offset_in_page(args->offset);
for (idx = args->offset >> PAGE_SHIFT; remain; idx++) {
struct page *page = i915_gem_object_get_page(obj, idx);
- int length;
-
- length = remain;
- if (offset + length > PAGE_SIZE)
- length = PAGE_SIZE - offset;
+ unsigned int length = min_t(u64, remain, PAGE_SIZE - offset);
ret = shmem_pwrite(page, offset, length, user_data,
page_to_phys(page) & obj_do_bit17_swizzling,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <[email protected]>
commit df5e31c204b34e8d9e5ec33f5b28e960c4f25e14 upstream.
We're no longer programming any watermarks when we're disabling
a pipe. That means ilk_wm_merge() & co. will keep considering
the any pipe that is getting disabled as still enabled. Thus we
either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal
ones (hsw-bdw).
This seems to have been broken by commit b6b178a77210 ("drm/i915:
Calculate ironlake intermediate watermarks correctly, v2."). Before
that we apparently had some difference between the intermediate
and optimal watermarks and so we would program the optiomal ones.
Now intermediate and optimal are identical for disabled pipes
and so we don't program either.
Fix this by programming the intermediate watermarks even for
disabled pipes. We were already doing that for skl+. We'll
leave out gmch platforms for now since those do the merging
in a different manner and should work as is. We'll want to
unify this eventually, but play it safe for now and just put
in a FIXME.
Cc: [email protected]
Cc: Matt Roper <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Maarten Lankhorst <[email protected]> #irc
(cherry picked from commit a748faea3bfd7fd1d1485bc1c426c7d460cc6503)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_display.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12639,17 +12639,12 @@ static void intel_atomic_commit_tail(str
intel_check_cpu_fifo_underruns(dev_priv);
intel_check_pch_fifo_underruns(dev_priv);
- if (!new_crtc_state->active) {
- /*
- * Make sure we don't call initial_watermarks
- * for ILK-style watermark updates.
- *
- * No clue what this is supposed to achieve.
- */
- if (INTEL_GEN(dev_priv) >= 9)
- dev_priv->display.initial_watermarks(intel_state,
- to_intel_crtc_state(new_crtc_state));
- }
+ /* FIXME unify this for all platforms */
+ if (!new_crtc_state->active &&
+ !HAS_GMCH_DISPLAY(dev_priv) &&
+ dev_priv->display.initial_watermarks)
+ dev_priv->display.initial_watermarks(intel_state,
+ to_intel_crtc_state(new_crtc_state));
}
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit 085603287452fc96376ed4888bf29f8c095d2b40 upstream.
Beware mixing unsigned long constants and 64b values, as on 32b the
constant will be zero extended and discard the high 32b when used as
a mask!
Reported-by: Sergii Romantsov <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282
Signed-off-by: Chris Wilson <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: [email protected]
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 6fc4e48f9ed46e9adff236a0c350074aafa3b7fa)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gvt/gtt.h | 1 -
drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +-
drivers/gpu/drm/i915/i915_gem_gtt.h | 2 ++
3 files changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/gvt/gtt.h
+++ b/drivers/gpu/drm/i915/gvt/gtt.h
@@ -35,7 +35,6 @@
#define _GVT_GTT_H_
#define I915_GTT_PAGE_SHIFT 12
-#define I915_GTT_PAGE_MASK (~(I915_GTT_PAGE_SIZE - 1))
struct intel_vgpu_mm;
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -458,7 +458,7 @@ eb_validate_vma(struct i915_execbuffer *
* any non-page-aligned or non-canonical addresses.
*/
if (unlikely(entry->flags & EXEC_OBJECT_PINNED &&
- entry->offset != gen8_canonical_addr(entry->offset & PAGE_MASK)))
+ entry->offset != gen8_canonical_addr(entry->offset & I915_GTT_PAGE_MASK)))
return -EINVAL;
/* pad_to_size was once a reserved field, so sanitize it */
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -49,6 +49,8 @@
#define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K
#define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M
+#define I915_GTT_PAGE_MASK -I915_GTT_PAGE_SIZE
+
#define I915_GTT_MIN_ALIGNMENT I915_GTT_PAGE_SIZE
#define I915_FENCE_REG_NONE -1
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit c58281056a8b26d5d9dc15c19859a7880835ef44 upstream.
Since we use a 64b virtual GTT irrespective of the system, we want to
ensure that the GTT computations remains 64b even on 32b systems,
including treatment of huge virtual pages.
No code generation changes on 64b:
Reported-by: Sergii Romantsov <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282
Signed-off-by: Chris Wilson <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: [email protected]
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9125963a9494253fa5a29cc1b4169885d2be7042)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +-
drivers/gpu/drm/i915/i915_gem_gtt.h | 6 +++---
drivers/gpu/drm/i915/selftests/huge_pages.c | 2 +-
drivers/gpu/drm/i915/selftests/i915_gem_gtt.c | 6 +++---
4 files changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -1768,7 +1768,7 @@ static void gen6_dump_ppgtt(struct i915_
if (i == 4)
continue;
- seq_printf(m, "\t\t(%03d, %04d) %08lx: ",
+ seq_printf(m, "\t\t(%03d, %04d) %08llx: ",
pde, pte,
(pde * GEN6_PTES + pte) * PAGE_SIZE);
for (i = 0; i < 4; i++) {
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -42,9 +42,9 @@
#include "i915_selftest.h"
#include "i915_timeline.h"
-#define I915_GTT_PAGE_SIZE_4K BIT(12)
-#define I915_GTT_PAGE_SIZE_64K BIT(16)
-#define I915_GTT_PAGE_SIZE_2M BIT(21)
+#define I915_GTT_PAGE_SIZE_4K BIT_ULL(12)
+#define I915_GTT_PAGE_SIZE_64K BIT_ULL(16)
+#define I915_GTT_PAGE_SIZE_2M BIT_ULL(21)
#define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K
#define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M
--- a/drivers/gpu/drm/i915/selftests/huge_pages.c
+++ b/drivers/gpu/drm/i915/selftests/huge_pages.c
@@ -549,7 +549,7 @@ static int igt_mock_ppgtt_misaligned_dma
err = igt_check_page_sizes(vma);
if (vma->page_sizes.gtt != I915_GTT_PAGE_SIZE_4K) {
- pr_err("page_sizes.gtt=%u, expected %lu\n",
+ pr_err("page_sizes.gtt=%u, expected %llu\n",
vma->page_sizes.gtt, I915_GTT_PAGE_SIZE_4K);
err = -EINVAL;
}
--- a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
@@ -1337,7 +1337,7 @@ static int igt_gtt_reserve(void *arg)
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
if (vma->node.start != total ||
vma->node.size != 2*I915_GTT_PAGE_SIZE) {
- pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+ pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
vma->node.start, vma->node.size,
total, 2*I915_GTT_PAGE_SIZE);
err = -EINVAL;
@@ -1386,7 +1386,7 @@ static int igt_gtt_reserve(void *arg)
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
if (vma->node.start != total ||
vma->node.size != 2*I915_GTT_PAGE_SIZE) {
- pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+ pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
vma->node.start, vma->node.size,
total, 2*I915_GTT_PAGE_SIZE);
err = -EINVAL;
@@ -1430,7 +1430,7 @@ static int igt_gtt_reserve(void *arg)
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
if (vma->node.start != offset ||
vma->node.size != 2*I915_GTT_PAGE_SIZE) {
- pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+ pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
vma->node.start, vma->node.size,
offset, 2*I915_GTT_PAGE_SIZE);
err = -EINVAL;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Akshu Agrawal <[email protected]>
commit 51ef434a15b450bfbef1e06cc87ee4e98a224486 upstream.
We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
Multiple runs of power measurement shows no imapct.
Signed-off-by: Akshu Agrawal <[email protected]>
Signed-off-by: Satyajit Sahu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c
@@ -1222,14 +1222,17 @@ static int smu8_dpm_force_dpm_level(stru
static int smu8_dpm_powerdown_uvd(struct pp_hwmgr *hwmgr)
{
- if (PP_CAP(PHM_PlatformCaps_UVDPowerGating))
+ if (PP_CAP(PHM_PlatformCaps_UVDPowerGating)) {
+ smu8_nbdpm_pstate_enable_disable(hwmgr, true, true);
return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_UVDPowerOFF);
+ }
return 0;
}
static int smu8_dpm_powerup_uvd(struct pp_hwmgr *hwmgr)
{
if (PP_CAP(PHM_PlatformCaps_UVDPowerGating)) {
+ smu8_nbdpm_pstate_enable_disable(hwmgr, false, true);
return smum_send_msg_to_smc_with_parameter(
hwmgr,
PPSMC_MSG_UVDPowerON,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit d9997b64c52b70bd98c48f443f068253621d1ffc upstream.
This caused a confusing error message, but there is functionally
no problem since the default method is DIRECT.
Reviewed-by: Michel Dänzer <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
@@ -277,6 +277,7 @@ amdgpu_ucode_get_load_type(struct amdgpu
case CHIP_PITCAIRN:
case CHIP_VERDE:
case CHIP_OLAND:
+ case CHIP_HAINAN:
return AMDGPU_FW_LOAD_DIRECT;
#endif
#ifdef CONFIG_DRM_AMDGPU_CIK
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry V. Levin <[email protected]>
commit aba118389a6fb2ad7958de0f37b5869852bd38cf upstream.
Consistently use types provided by <linux/types.h> via <drm/drm.h>
to fix the following linux/kfd_ioctl.h userspace compilation errors:
/usr/include/linux/kfd_ioctl.h:250:2: error: unknown type name 'uint32_t'
uint32_t reset_type;
/usr/include/linux/kfd_ioctl.h:251:2: error: unknown type name 'uint32_t'
uint32_t reset_cause;
/usr/include/linux/kfd_ioctl.h:252:2: error: unknown type name 'uint32_t'
uint32_t memory_lost;
/usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t'
uint32_t gpu_id;
Fixes: 0c119abad7f0d ("drm/amd: Add kfd ioctl defines for hw_exception event")
Cc: <[email protected]> # v4.19
Signed-off-by: Dmitry V. Levin <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/kfd_ioctl.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/include/uapi/linux/kfd_ioctl.h
+++ b/include/uapi/linux/kfd_ioctl.h
@@ -247,10 +247,10 @@ struct kfd_hsa_memory_exception_data {
/* hw exception data */
struct kfd_hsa_hw_exception_data {
- uint32_t reset_type;
- uint32_t reset_cause;
- uint32_t memory_lost;
- uint32_t gpu_id;
+ __u32 reset_type;
+ __u32 reset_cause;
+ __u32 memory_lost;
+ __u32 gpu_id;
};
/* Event data */
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Uwe Kleine-König <[email protected]>
commit 6f4d29df66acd49303a99025046b85cabe7aa17a upstream.
Without this change the following happens when using Python3 (3.6.6):
$ echo "GPL-2.0" | python3 scripts/spdxcheck.py -
FAIL: 'str' object has no attribute 'decode'
Traceback (most recent call last):
File "scripts/spdxcheck.py", line 253, in <module>
parser.parse_lines(sys.stdin, args.maxlines, '-')
File "scripts/spdxcheck.py", line 171, in parse_lines
line = line.decode(locale.getpreferredencoding(False), errors='ignore')
AttributeError: 'str' object has no attribute 'decode'
So as the line is already a string, there is no need to decode it and
the line can be dropped.
/usr/bin/python on Arch is Python 3. So this would indeed be worth
going into 4.19.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/spdxcheck.py | 1 -
1 file changed, 1 deletion(-)
--- a/scripts/spdxcheck.py
+++ b/scripts/spdxcheck.py
@@ -168,7 +168,6 @@ class id_parser(object):
self.curline = 0
try:
for line in fd:
- line = line.decode(locale.getpreferredencoding(False), errors='ignore')
self.curline += 1
if self.curline > maxlines:
break
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <[email protected]>
commit dc854914999d5d52ac1b31740cb0ea8d89d0372e upstream.
Remember, ida IDs start at 0, not 1!
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Cc: [email protected]
Signed-off-by: Ben Skeggs <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_backlight.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -116,7 +116,7 @@ nv40_backlight_init(struct drm_connector
&nv40_bl_ops, &props);
if (IS_ERR(bd)) {
- if (bl_connector.id > 0)
+ if (bl_connector.id >= 0)
ida_simple_remove(&bl_ida, bl_connector.id);
return PTR_ERR(bd);
}
@@ -249,7 +249,7 @@ nv50_backlight_init(struct drm_connector
nv_encoder, ops, &props);
if (IS_ERR(bd)) {
- if (bl_connector.id > 0)
+ if (bl_connector.id >= 0)
ida_simple_remove(&bl_ida, bl_connector.id);
return PTR_ERR(bd);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Diego Viola <[email protected]>
commit 410b5c7b48368317af95f0113692561d01d8144e upstream.
med_power_with_dipm still causes freezes after updating the firmware to
the latest version (DXT04L5Q).
Set model_rev to NULL and blacklist the device.
Cc: [email protected]
Signed-off-by: Diego Viola <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4553,7 +4553,7 @@ static const struct ata_blacklist_entry
/* These specific Samsung models/firmware-revs do not handle LPM well */
{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
{ "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM, },
- { "SAMSUNG MZ7TD256HAFV-000L9", "DXT02L5Q", ATA_HORKAGE_NOLPM, },
+ { "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM, },
/* devices that don't properly handle queued TRIM commands */
{ "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit f43f39958beb206b53292801e216d9b8a660f087 upstream.
All bytes of the NETLINK_CRYPTO report structures must be initialized,
since they are copied to userspace. The change from strncpy() to
strlcpy() broke this. As a minimal fix, change it back.
Fixes: 4473710df1f8 ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME expansion")
Cc: <[email protected]> # v4.12+
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/crypto_user.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/crypto/crypto_user.c
+++ b/crypto/crypto_user.c
@@ -83,7 +83,7 @@ static int crypto_report_cipher(struct s
{
struct crypto_report_cipher rcipher;
- strlcpy(rcipher.type, "cipher", sizeof(rcipher.type));
+ strncpy(rcipher.type, "cipher", sizeof(rcipher.type));
rcipher.blocksize = alg->cra_blocksize;
rcipher.min_keysize = alg->cra_cipher.cia_min_keysize;
@@ -102,7 +102,7 @@ static int crypto_report_comp(struct sk_
{
struct crypto_report_comp rcomp;
- strlcpy(rcomp.type, "compression", sizeof(rcomp.type));
+ strncpy(rcomp.type, "compression", sizeof(rcomp.type));
if (nla_put(skb, CRYPTOCFGA_REPORT_COMPRESS,
sizeof(struct crypto_report_comp), &rcomp))
goto nla_put_failure;
@@ -116,7 +116,7 @@ static int crypto_report_acomp(struct sk
{
struct crypto_report_acomp racomp;
- strlcpy(racomp.type, "acomp", sizeof(racomp.type));
+ strncpy(racomp.type, "acomp", sizeof(racomp.type));
if (nla_put(skb, CRYPTOCFGA_REPORT_ACOMP,
sizeof(struct crypto_report_acomp), &racomp))
@@ -131,7 +131,7 @@ static int crypto_report_akcipher(struct
{
struct crypto_report_akcipher rakcipher;
- strlcpy(rakcipher.type, "akcipher", sizeof(rakcipher.type));
+ strncpy(rakcipher.type, "akcipher", sizeof(rakcipher.type));
if (nla_put(skb, CRYPTOCFGA_REPORT_AKCIPHER,
sizeof(struct crypto_report_akcipher), &rakcipher))
@@ -146,7 +146,7 @@ static int crypto_report_kpp(struct sk_b
{
struct crypto_report_kpp rkpp;
- strlcpy(rkpp.type, "kpp", sizeof(rkpp.type));
+ strncpy(rkpp.type, "kpp", sizeof(rkpp.type));
if (nla_put(skb, CRYPTOCFGA_REPORT_KPP,
sizeof(struct crypto_report_kpp), &rkpp))
@@ -160,10 +160,10 @@ nla_put_failure:
static int crypto_report_one(struct crypto_alg *alg,
struct crypto_user_alg *ualg, struct sk_buff *skb)
{
- strlcpy(ualg->cru_name, alg->cra_name, sizeof(ualg->cru_name));
- strlcpy(ualg->cru_driver_name, alg->cra_driver_name,
+ strncpy(ualg->cru_name, alg->cra_name, sizeof(ualg->cru_name));
+ strncpy(ualg->cru_driver_name, alg->cra_driver_name,
sizeof(ualg->cru_driver_name));
- strlcpy(ualg->cru_module_name, module_name(alg->cra_module),
+ strncpy(ualg->cru_module_name, module_name(alg->cra_module),
sizeof(ualg->cru_module_name));
ualg->cru_type = 0;
@@ -176,7 +176,7 @@ static int crypto_report_one(struct cryp
if (alg->cra_flags & CRYPTO_ALG_LARVAL) {
struct crypto_report_larval rl;
- strlcpy(rl.type, "larval", sizeof(rl.type));
+ strncpy(rl.type, "larval", sizeof(rl.type));
if (nla_put(skb, CRYPTOCFGA_REPORT_LARVAL,
sizeof(struct crypto_report_larval), &rl))
goto nla_put_failure;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <[email protected]>
commit 7f3ef5dedb146e3d5063b6845781ad1bb59b92b5 upstream.
Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.
In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).
A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.
Signed-off-by: Marc Zyngier <[email protected]>
Tested-by: Vicente Bergas <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -442,6 +442,11 @@ static int rockchip_drm_platform_remove(
return 0;
}
+static void rockchip_drm_platform_shutdown(struct platform_device *pdev)
+{
+ rockchip_drm_platform_remove(pdev);
+}
+
static const struct of_device_id rockchip_drm_dt_ids[] = {
{ .compatible = "rockchip,display-subsystem", },
{ /* sentinel */ },
@@ -451,6 +456,7 @@ MODULE_DEVICE_TABLE(of, rockchip_drm_dt_
static struct platform_driver rockchip_drm_platform_driver = {
.probe = rockchip_drm_platform_probe,
.remove = rockchip_drm_platform_remove,
+ .shutdown = rockchip_drm_platform_shutdown,
.driver = {
.name = "rockchip-drm",
.of_match_table = rockchip_drm_dt_ids,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 21a446cf186570168b7281b154b1993968598aca upstream.
If we exit the NFSv4 state manager due to a umount, then we can end up
leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes
the nfs4_client to be rereferenced before it is destroyed, then we end
up never being able to recover state.
Fixes: 47c2199b6eb5 ("NFSv4.1: Ensure state manager thread dies on last ...")
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected] # v4.15+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4state.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -2583,11 +2583,12 @@ static void nfs4_state_manager(struct nf
nfs4_clear_state_manager_bit(clp);
/* Did we race with an attempt to give us more work? */
if (clp->cl_state == 0)
- break;
+ return;
if (test_and_set_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) != 0)
- break;
+ return;
} while (refcount_read(&clp->cl_count) > 1);
- return;
+ goto out_drain;
+
out_error:
if (strlen(section))
section_sep = ": ";
@@ -2595,6 +2596,7 @@ out_error:
" with error %d\n", section_sep, section,
clp->cl_hostname, -status);
ssleep(1);
+out_drain:
nfs4_end_drain_session(clp);
nfs4_clear_state_manager_bit(clp);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wengang Wang <[email protected]>
commit 5040f8df56fb90c7919f1c9b0b6e54c843437456 upstream.
The write context should also be freed even when direct IO failed.
Otherwise a memory leak is introduced and entries remain in
oi->ip_unwritten_list causing the following BUG later in unlink path:
ERROR: bug expression: !list_empty(&oi->ip_unwritten_list)
ERROR: Clear inode of 215043, inode has unwritten extents
...
Call Trace:
? __set_current_blocked+0x42/0x68
ocfs2_evict_inode+0x91/0x6a0 [ocfs2]
? bit_waitqueue+0x40/0x33
evict+0xdb/0x1af
iput+0x1a2/0x1f7
do_unlinkat+0x194/0x28f
SyS_unlinkat+0x1b/0x2f
do_syscall_64+0x79/0x1ae
entry_SYSCALL_64_after_hwframe+0x151/0x0
This patch also logs, with frequency limit, direct IO failures.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Wengang Wang <[email protected]>
Reviewed-by: Junxiao Bi <[email protected]>
Reviewed-by: Changwei Ge <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/aops.c | 12 ++++++++++--
fs/ocfs2/cluster/masklog.h | 9 +++++++++
2 files changed, 19 insertions(+), 2 deletions(-)
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -2412,8 +2412,16 @@ static int ocfs2_dio_end_io(struct kiocb
/* this io's submitter should not have unlocked this before we could */
BUG_ON(!ocfs2_iocb_is_rw_locked(iocb));
- if (bytes > 0 && private)
- ret = ocfs2_dio_end_io_write(inode, private, offset, bytes);
+ if (bytes <= 0)
+ mlog_ratelimited(ML_ERROR, "Direct IO failed, bytes = %lld",
+ (long long)bytes);
+ if (private) {
+ if (bytes > 0)
+ ret = ocfs2_dio_end_io_write(inode, private, offset,
+ bytes);
+ else
+ ocfs2_dio_free_write_ctx(inode, private);
+ }
ocfs2_iocb_clear_rw_locked(iocb);
--- a/fs/ocfs2/cluster/masklog.h
+++ b/fs/ocfs2/cluster/masklog.h
@@ -178,6 +178,15 @@ do { \
##__VA_ARGS__); \
} while (0)
+#define mlog_ratelimited(mask, fmt, ...) \
+do { \
+ static DEFINE_RATELIMIT_STATE(_rs, \
+ DEFAULT_RATELIMIT_INTERVAL, \
+ DEFAULT_RATELIMIT_BURST); \
+ if (__ratelimit(&_rs)) \
+ mlog(mask, fmt, ##__VA_ARGS__); \
+} while (0)
+
#define mlog_errno(st) ({ \
int _st = (st); \
if (_st != -ERESTARTSYS && _st != -EINTR && \
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Kelley <[email protected]>
commit 35b69a420bfb56b7b74cb635ea903db05e357bec upstream.
Add support for platforms where pit_shutdown() doesn't work because of a
quirk in the PIT emulation. On these platforms setting the counter register
to zero causes the PIT to start running again, negating the shutdown.
Provide a global variable that controls whether the counter register is
zero'ed, which platform specific code can override.
Signed-off-by: Michael Kelley <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: vkuznets <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: KY Srinivasan <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clocksource/i8253.c | 14 ++++++++++++--
include/linux/i8253.h | 1 +
2 files changed, 13 insertions(+), 2 deletions(-)
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -20,6 +20,13 @@
DEFINE_RAW_SPINLOCK(i8253_lock);
EXPORT_SYMBOL(i8253_lock);
+/*
+ * Handle PIT quirk in pit_shutdown() where zeroing the counter register
+ * restarts the PIT, negating the shutdown. On platforms with the quirk,
+ * platform specific code can set this to false.
+ */
+bool i8253_clear_counter_on_shutdown __ro_after_init = true;
+
#ifdef CONFIG_CLKSRC_I8253
/*
* Since the PIT overflows every tick, its not very useful
@@ -109,8 +116,11 @@ static int pit_shutdown(struct clock_eve
raw_spin_lock(&i8253_lock);
outb_p(0x30, PIT_MODE);
- outb_p(0, PIT_CH0);
- outb_p(0, PIT_CH0);
+
+ if (i8253_clear_counter_on_shutdown) {
+ outb_p(0, PIT_CH0);
+ outb_p(0, PIT_CH0);
+ }
raw_spin_unlock(&i8253_lock);
return 0;
--- a/include/linux/i8253.h
+++ b/include/linux/i8253.h
@@ -21,6 +21,7 @@
#define PIT_LATCH ((PIT_TICK_RATE + HZ/2) / HZ)
extern raw_spinlock_t i8253_lock;
+extern bool i8253_clear_counter_on_shutdown;
extern struct clock_event_device i8253_clockevent;
extern void clockevent_i8253_init(bool oneshot);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit 6282e916f774e37845c65d1eae9f8c649004f033 upstream.
Due to what appears to be a copy/paste error, the opening ENTRY()
of cpu_v7_hvc_switch_mm() lacks a matching ENDPROC(), and instead,
the one for cpu_v7_smc_switch_mm() is duplicated.
Given that it is ENDPROC() that emits the Thumb annotation, the
cpu_v7_hvc_switch_mm() routine will be called in ARM mode on a
Thumb2 kernel, resulting in the following splat:
Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc1-00030-g4d28ad89189d-dirty #488
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
PC is at cpu_v7_hvc_switch_mm+0x12/0x18
LR is at flush_old_exec+0x31b/0x570
pc : [<c0316efe>] lr : [<c04117c7>] psr: 00000013
sp : ee899e50 ip : 00000000 fp : 00000001
r10: eda28f34 r9 : eda31800 r8 : c12470e0
r7 : eda1fc00 r6 : eda53000 r5 : 00000000 r4 : ee88c000
r3 : c0316eec r2 : 00000001 r1 : eda53000 r0 : 6da6c000
Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Note the 'ISA ARM' in the last line.
Fix this by using the correct name in ENDPROC().
Cc: <[email protected]>
Fixes: 10115105cb3a ("ARM: spectre-v2: add firmware based hardening")
Reviewed-by: Dave Martin <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mm/proc-v7.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -112,7 +112,7 @@ ENTRY(cpu_v7_hvc_switch_mm)
hvc #0
ldmfd sp!, {r0 - r3}
b cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+ENDPROC(cpu_v7_hvc_switch_mm)
#endif
ENTRY(cpu_v7_iciallu_switch_mm)
mov r3, #0
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: H. Peter Anvin (Intel) <[email protected]>
commit d0ffb805b729322626639336986bc83fc2e60871 upstream.
Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags
using arbitrary flags. Because BOTHER is not defined, the general
Linux code doesn't allow setting arbitrary baud rates, and because
CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in
drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037.
Resolve both problems by #defining BOTHER to 037 on Alpha.
However, userspace still needs to know if setting BOTHER is actually
safe given legacy kernels (does anyone actually care about that on
Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even
though they use the same structure. Define struct termios2 just for
compatibility; it is the exact same structure as struct termios. In a
future patchset, this will be cleaned up so the uapi headers are
usable from libc.
Signed-off-by: H. Peter Anvin (Intel) <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Eugene Syromiatnikov <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Alan Cox <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/alpha/include/asm/termios.h | 8 +++++++-
arch/alpha/include/uapi/asm/ioctls.h | 5 +++++
arch/alpha/include/uapi/asm/termbits.h | 17 +++++++++++++++++
3 files changed, 29 insertions(+), 1 deletion(-)
--- a/arch/alpha/include/asm/termios.h
+++ b/arch/alpha/include/asm/termios.h
@@ -73,9 +73,15 @@
})
#define user_termios_to_kernel_termios(k, u) \
- copy_from_user(k, u, sizeof(struct termios))
+ copy_from_user(k, u, sizeof(struct termios2))
#define kernel_termios_to_user_termios(u, k) \
+ copy_to_user(u, k, sizeof(struct termios2))
+
+#define user_termios_to_kernel_termios_1(k, u) \
+ copy_from_user(k, u, sizeof(struct termios))
+
+#define kernel_termios_to_user_termios_1(u, k) \
copy_to_user(u, k, sizeof(struct termios))
#endif /* _ALPHA_TERMIOS_H */
--- a/arch/alpha/include/uapi/asm/ioctls.h
+++ b/arch/alpha/include/uapi/asm/ioctls.h
@@ -32,6 +32,11 @@
#define TCXONC _IO('t', 30)
#define TCFLSH _IO('t', 31)
+#define TCGETS2 _IOR('T', 42, struct termios2)
+#define TCSETS2 _IOW('T', 43, struct termios2)
+#define TCSETSW2 _IOW('T', 44, struct termios2)
+#define TCSETSF2 _IOW('T', 45, struct termios2)
+
#define TIOCSWINSZ _IOW('t', 103, struct winsize)
#define TIOCGWINSZ _IOR('t', 104, struct winsize)
#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
--- a/arch/alpha/include/uapi/asm/termbits.h
+++ b/arch/alpha/include/uapi/asm/termbits.h
@@ -26,6 +26,19 @@ struct termios {
speed_t c_ospeed; /* output speed */
};
+/* Alpha has identical termios and termios2 */
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_cc[NCCS]; /* control characters */
+ cc_t c_line; /* line discipline (== c_cc[19]) */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* Alpha has matching termios and ktermios */
struct ktermios {
@@ -152,6 +165,7 @@ struct ktermios {
#define B3000000 00034
#define B3500000 00035
#define B4000000 00036
+#define BOTHER 00037
#define CSIZE 00001400
#define CS5 00000000
@@ -169,6 +183,9 @@ struct ktermios {
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define CIBAUD 07600000
+#define IBSHIFT 16
+
/* c_lflag bits */
#define ISIG 0x00000080
#define ICANON 0x00000100
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <[email protected]>
commit 832ad0e3da4510fd17f98804abe512ea9a747035 upstream.
The Keystone QMSS driver is pretty damaged, in the sense that it
does things like this:
irq_set_affinity_hint(irq, to_cpumask(&cpu_map));
where cpu_map is a local variable. As we leave the function, this
will point to nowhere-land, and things will end-up badly.
Instead, let's use a proper cpumask that gets allocated, giving
the driver a chance to actually work with things like irqbalance
as well as have a hypothetical 64bit future.
Cc: [email protected]
Acked-by: Santosh Shilimkar <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soc/ti/knav_qmss.h | 4 ++--
drivers/soc/ti/knav_qmss_acc.c | 10 +++++-----
drivers/soc/ti/knav_qmss_queue.c | 22 +++++++++++++++-------
3 files changed, 22 insertions(+), 14 deletions(-)
--- a/drivers/soc/ti/knav_qmss.h
+++ b/drivers/soc/ti/knav_qmss.h
@@ -329,8 +329,8 @@ struct knav_range_ops {
};
struct knav_irq_info {
- int irq;
- u32 cpu_map;
+ int irq;
+ struct cpumask *cpu_mask;
};
struct knav_range_info {
--- a/drivers/soc/ti/knav_qmss_acc.c
+++ b/drivers/soc/ti/knav_qmss_acc.c
@@ -205,18 +205,18 @@ static int knav_range_setup_acc_irq(stru
{
struct knav_device *kdev = range->kdev;
struct knav_acc_channel *acc;
- unsigned long cpu_map;
+ struct cpumask *cpu_mask;
int ret = 0, irq;
u32 old, new;
if (range->flags & RANGE_MULTI_QUEUE) {
acc = range->acc;
irq = range->irqs[0].irq;
- cpu_map = range->irqs[0].cpu_map;
+ cpu_mask = range->irqs[0].cpu_mask;
} else {
acc = range->acc + queue;
irq = range->irqs[queue].irq;
- cpu_map = range->irqs[queue].cpu_map;
+ cpu_mask = range->irqs[queue].cpu_mask;
}
old = acc->open_mask;
@@ -239,8 +239,8 @@ static int knav_range_setup_acc_irq(stru
acc->name, acc->name);
ret = request_irq(irq, knav_acc_int_handler, 0, acc->name,
range);
- if (!ret && cpu_map) {
- ret = irq_set_affinity_hint(irq, to_cpumask(&cpu_map));
+ if (!ret && cpu_mask) {
+ ret = irq_set_affinity_hint(irq, cpu_mask);
if (ret) {
dev_warn(range->kdev->dev,
"Failed to set IRQ affinity\n");
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -118,19 +118,17 @@ static int knav_queue_setup_irq(struct k
struct knav_queue_inst *inst)
{
unsigned queue = inst->id - range->queue_base;
- unsigned long cpu_map;
int ret = 0, irq;
if (range->flags & RANGE_HAS_IRQ) {
irq = range->irqs[queue].irq;
- cpu_map = range->irqs[queue].cpu_map;
ret = request_irq(irq, knav_queue_int_handler, 0,
inst->irq_name, inst);
if (ret)
return ret;
disable_irq(irq);
- if (cpu_map) {
- ret = irq_set_affinity_hint(irq, to_cpumask(&cpu_map));
+ if (range->irqs[queue].cpu_mask) {
+ ret = irq_set_affinity_hint(irq, range->irqs[queue].cpu_mask);
if (ret) {
dev_warn(range->kdev->dev,
"Failed to set IRQ affinity\n");
@@ -1262,9 +1260,19 @@ static int knav_setup_queue_range(struct
range->num_irqs++;
- if (IS_ENABLED(CONFIG_SMP) && oirq.args_count == 3)
- range->irqs[i].cpu_map =
- (oirq.args[2] & 0x0000ff00) >> 8;
+ if (IS_ENABLED(CONFIG_SMP) && oirq.args_count == 3) {
+ unsigned long mask;
+ int bit;
+
+ range->irqs[i].cpu_mask = devm_kzalloc(dev,
+ cpumask_size(), GFP_KERNEL);
+ if (!range->irqs[i].cpu_mask)
+ return -ENOMEM;
+
+ mask = (oirq.args[2] & 0x0000ff00) >> 8;
+ for_each_set_bit(bit, &mask, BITS_PER_LONG)
+ cpumask_set_cpu(bit, range->irqs[i].cpu_mask);
+ }
}
range->num_irqs = min(range->num_irqs, range->num_queues);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vishal Verma <[email protected]>
commit 5d96c9342c23ee1d084802dcf064caa67ecaa45b upstream.
The MCE handler for nfit devices is called for memory errors on a
Non-Volatile DIMM and adds the error location to a 'badblocks' list.
This list is used by the various NVDIMM drivers to avoid consuming known
poison locations during IO.
The MCE handler gets called for both corrected and uncorrectable errors.
Until now, both kinds of errors have been added to the badblocks list.
However, corrected memory errors indicate that the problem has already
been fixed by hardware, and the resulting interrupt is merely a
notification to Linux.
As far as future accesses to that location are concerned, it is
perfectly fine to use, and thus doesn't need to be included in the above
badblocks list.
Add a check in the nfit MCE handler to filter out corrected mce events,
and only process uncorrectable errors.
Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Omar Avelar <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
CC: Arnd Bergmann <[email protected]>
CC: Dan Williams <[email protected]>
CC: Dave Jiang <[email protected]>
CC: [email protected]
CC: "H. Peter Anvin" <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: Len Brown <[email protected]>
CC: [email protected]
CC: linux-edac <[email protected]>
CC: [email protected]
CC: Qiuxu Zhuo <[email protected]>
CC: "Rafael J. Wysocki" <[email protected]>
CC: Ross Zwisler <[email protected]>
CC: stable <[email protected]>
CC: Thomas Gleixner <[email protected]>
CC: Tony Luck <[email protected]>
CC: x86-ml <[email protected]>
CC: Yazen Ghannam <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/mce.h | 1 +
arch/x86/kernel/cpu/mcheck/mce.c | 3 ++-
drivers/acpi/nfit/mce.c | 4 ++--
3 files changed, 5 insertions(+), 3 deletions(-)
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -216,6 +216,7 @@ static inline int umc_normaddr_to_sysadd
int mce_available(struct cpuinfo_x86 *c);
bool mce_is_memory_error(struct mce *m);
+bool mce_is_correctable(struct mce *m);
DECLARE_PER_CPU(unsigned, mce_exception_count);
DECLARE_PER_CPU(unsigned, mce_poll_count);
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -534,7 +534,7 @@ bool mce_is_memory_error(struct mce *m)
}
EXPORT_SYMBOL_GPL(mce_is_memory_error);
-static bool mce_is_correctable(struct mce *m)
+bool mce_is_correctable(struct mce *m)
{
if (m->cpuvendor == X86_VENDOR_AMD && m->status & MCI_STATUS_DEFERRED)
return false;
@@ -544,6 +544,7 @@ static bool mce_is_correctable(struct mc
return true;
}
+EXPORT_SYMBOL_GPL(mce_is_correctable);
static bool cec_add_mce(struct mce *m)
{
--- a/drivers/acpi/nfit/mce.c
+++ b/drivers/acpi/nfit/mce.c
@@ -25,8 +25,8 @@ static int nfit_handle_mce(struct notifi
struct acpi_nfit_desc *acpi_desc;
struct nfit_spa *nfit_spa;
- /* We only care about memory errors */
- if (!mce_is_memory_error(mce))
+ /* We only care about uncorrectable memory errors */
+ if (!mce_is_memory_error(mce) || mce_is_correctable(mce))
return NOTIFY_DONE;
/*
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit c09bcc91bb94ed91f1391bffcbe294963d605732 upstream.
Reading the registers without waiting for engine idle returns
unpredictable values. These unpredictable values result in display
corruption - if atyfb_imageblit reads the content of DP_PIX_WIDTH with the
bit DP_HOST_TRIPLE_EN set (from previous invocation), the driver would
never ever clear the bit, resulting in display corruption.
We don't want to wait for idle because it would degrade performance, so
this patch modifies the driver so that it never reads accelerator
registers.
HOST_CNTL doesn't have to be read, we can just write it with
HOST_BYTE_ALIGN because no other part of the driver cares if
HOST_BYTE_ALIGN is set.
DP_PIX_WIDTH is written in the functions atyfb_copyarea and atyfb_fillrect
with the default value and in atyfb_imageblit with the value set according
to the source image data.
Signed-off-by: Mikulas Patocka <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Cc: [email protected]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/aty/mach64_accel.c | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
--- a/drivers/video/fbdev/aty/mach64_accel.c
+++ b/drivers/video/fbdev/aty/mach64_accel.c
@@ -127,7 +127,7 @@ void aty_init_engine(struct atyfb_par *p
/* set host attributes */
wait_for_fifo(13, par);
- aty_st_le32(HOST_CNTL, 0, par);
+ aty_st_le32(HOST_CNTL, HOST_BYTE_ALIGN, par);
/* set pattern attributes */
aty_st_le32(PAT_REG0, 0, par);
@@ -233,7 +233,8 @@ void atyfb_copyarea(struct fb_info *info
rotation = rotation24bpp(dx, direction);
}
- wait_for_fifo(4, par);
+ wait_for_fifo(5, par);
+ aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, par);
aty_st_le32(DP_SRC, FRGD_SRC_BLIT, par);
aty_st_le32(SRC_Y_X, (sx << 16) | sy, par);
aty_st_le32(SRC_HEIGHT1_WIDTH1, (width << 16) | area->height, par);
@@ -269,7 +270,8 @@ void atyfb_fillrect(struct fb_info *info
rotation = rotation24bpp(dx, DST_X_LEFT_TO_RIGHT);
}
- wait_for_fifo(3, par);
+ wait_for_fifo(4, par);
+ aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, par);
aty_st_le32(DP_FRGD_CLR, color, par);
aty_st_le32(DP_SRC,
BKGD_SRC_BKGD_CLR | FRGD_SRC_FRGD_CLR | MONO_SRC_ONE,
@@ -284,7 +286,7 @@ void atyfb_imageblit(struct fb_info *inf
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
u32 src_bytes, dx = image->dx, dy = image->dy, width = image->width;
- u32 pix_width_save, pix_width, host_cntl, rotation = 0, src, mix;
+ u32 pix_width, rotation = 0, src, mix;
if (par->asleep)
return;
@@ -296,8 +298,7 @@ void atyfb_imageblit(struct fb_info *inf
return;
}
- pix_width = pix_width_save = aty_ld_le32(DP_PIX_WIDTH, par);
- host_cntl = aty_ld_le32(HOST_CNTL, par) | HOST_BYTE_ALIGN;
+ pix_width = par->crtc.dp_pix_width;
switch (image->depth) {
case 1:
@@ -370,12 +371,11 @@ void atyfb_imageblit(struct fb_info *inf
mix = FRGD_MIX_D_XOR_S | BKGD_MIX_D;
}
- wait_for_fifo(6, par);
- aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF, par);
+ wait_for_fifo(5, par);
aty_st_le32(DP_PIX_WIDTH, pix_width, par);
aty_st_le32(DP_MIX, mix, par);
aty_st_le32(DP_SRC, src, par);
- aty_st_le32(HOST_CNTL, host_cntl, par);
+ aty_st_le32(HOST_CNTL, HOST_BYTE_ALIGN, par);
aty_st_le32(DST_CNTL, DST_Y_TOP_TO_BOTTOM | DST_X_LEFT_TO_RIGHT | rotation, par);
draw_rect(dx, dy, width, image->height, par);
@@ -424,8 +424,4 @@ void atyfb_imageblit(struct fb_info *inf
aty_st_le32(HOST_DATA0, get_unaligned_le32(pbitmap), par);
}
}
-
- /* restore pix_width */
- wait_for_fifo(1, par);
- aty_st_le32(DP_PIX_WIDTH, pix_width_save, par);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit 94e6992bb560be8bffb47f287194adf070b57695 upstream.
If the read is large enough, we end up spinning in the messenger:
libceph: osd0 192.168.122.1:6801 io error
libceph: osd0 192.168.122.1:6801 io error
libceph: osd0 192.168.122.1:6801 io error
This is a receive side limit, so only reads were affected.
Cc: [email protected]
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/ceph/libceph.h | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -81,7 +81,13 @@ struct ceph_options {
#define CEPH_MSG_MAX_FRONT_LEN (16*1024*1024)
#define CEPH_MSG_MAX_MIDDLE_LEN (16*1024*1024)
-#define CEPH_MSG_MAX_DATA_LEN (16*1024*1024)
+
+/*
+ * Handle the largest possible rbd object in one message.
+ * There is no limit on the size of cephfs objects, but it has to obey
+ * rsize and wsize mount options anyway.
+ */
+#define CEPH_MSG_MAX_DATA_LEN (32*1024*1024)
#define CEPH_AUTH_NAME_DEFAULT "guest"
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <[email protected]>
commit 0676b957c24bfb6e495449ba7b7e72c5b5d79233 upstream.
32bit UML used to define PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP
own its own because many years ago not all libcs had these request codes
in their UAPI.
These days PTRACE_SYSEMU/_SINGLESTEP is well known and part of glibc
and our own define becomes problematic.
With change c48831d0eebf ("linux/x86: sync sys/ptrace.h with Linux 4.14
[BZ #22433]") glibc turned PTRACE_SYSEMU/_SINGLESTEP into a enum and
UML failed to build.
Let's drop our define and rely on the fact that every libc has
PTRACE_SYSEMU/_SINGLESTEP.
Cc: <[email protected]>
Cc: Ritesh Raj Sarraf <[email protected]>
Reported-and-tested-by: Ritesh Raj Sarraf <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/um/shared/sysdep/ptrace_32.h | 10 ----------
1 file changed, 10 deletions(-)
--- a/arch/x86/um/shared/sysdep/ptrace_32.h
+++ b/arch/x86/um/shared/sysdep/ptrace_32.h
@@ -10,20 +10,10 @@
static inline void update_debugregs(int seq) {}
-/* syscall emulation path in ptrace */
-
-#ifndef PTRACE_SYSEMU
-#define PTRACE_SYSEMU 31
-#endif
-
void set_using_sysemu(int value);
int get_using_sysemu(void);
extern int sysemu_supported;
-#ifndef PTRACE_SYSEMU_SINGLESTEP
-#define PTRACE_SYSEMU_SINGLESTEP 32
-#endif
-
#define UPT_SYSCALL_ARG1(r) UPT_BX(r)
#define UPT_SYSCALL_ARG2(r) UPT_CX(r)
#define UPT_SYSCALL_ARG3(r) UPT_DX(r)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 360fe725f8849aaddc53475fef5d4a0c439b05ae ]
After commit e509bd7da149dc349160 ("genirq: Allow migration of chained
interrupts by installing default action") Loongson-3 fails at here:
setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
This is because both chained_action and cascade_irqaction don't have
IRQF_SHARED flag. This will cause Loongson-3 resume fails because HPET
timer interrupt can't be delivered during S3. So we set the irqchip of
the chained irq to loongson_irq_chip which doesn't disable the chained
irq in CP0.Status.
Cc: [email protected]
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/20434/
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: Fuxin Zhang <[email protected]>
Cc: Zhangjin Wu <[email protected]>
Cc: Huacai Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/mach-loongson64/irq.h | 2 +-
arch/mips/loongson64/loongson-3/irq.c | 13 +++----------
2 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson64/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h
index 3644b68c0ccc..be9f727a9328 100644
--- a/arch/mips/include/asm/mach-loongson64/irq.h
+++ b/arch/mips/include/asm/mach-loongson64/irq.h
@@ -10,7 +10,7 @@
#define MIPS_CPU_IRQ_BASE 56
#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* UART */
-#define LOONGSON_HT1_IRQ (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
+#define LOONGSON_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 3) /* CASCADE */
#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
#define LOONGSON_HT1_CFG_BASE loongson_sysconf.ht_control_base
diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c
index 2e115ab66a00..5605061f5f98 100644
--- a/arch/mips/loongson64/loongson-3/irq.c
+++ b/arch/mips/loongson64/loongson-3/irq.c
@@ -96,12 +96,6 @@ void mach_irq_dispatch(unsigned int pending)
}
}
-static struct irqaction cascade_irqaction = {
- .handler = no_action,
- .flags = IRQF_NO_SUSPEND,
- .name = "cascade",
-};
-
static inline void mask_loongson_irq(struct irq_data *d) { }
static inline void unmask_loongson_irq(struct irq_data *d) { }
@@ -147,11 +141,10 @@ void __init mach_init_irq(void)
irq_set_chip_and_handler(LOONGSON_UART_IRQ,
&loongson_irq_chip, handle_percpu_irq);
+ irq_set_chip_and_handler(LOONGSON_BRIDGE_IRQ,
+ &loongson_irq_chip, handle_percpu_irq);
- /* setup HT1 irq */
- setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
-
- set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+ set_c0_status(STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP6);
}
#ifdef CONFIG_HOTPLUG_CPU
--
2.17.1
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rashmica Gupta <[email protected]>
[ Upstream commit 3f7daf3d7582dc6628ac40a9045dd1bbd80c5f35 ]
When hot-removing memory release_mem_region_adjustable() splits iomem
resources if they are not the exact size of the memory being
hot-deleted. Adding this memory back to the kernel adds a new resource.
Eg a node has memory 0x0 - 0xfffffffff. Hot-removing 1GB from
0xf40000000 results in the single resource 0x0-0xfffffffff being split
into two resources: 0x0-0xf3fffffff and 0xf80000000-0xfffffffff.
When we hot-add the memory back we now have three resources:
0x0-0xf3fffffff, 0xf40000000-0xf7fffffff, and 0xf80000000-0xfffffffff.
This is an issue if we try to remove some memory that overlaps
resources. Eg when trying to remove 2GB at address 0xf40000000,
release_mem_region_adjustable() fails as it expects the chunk of memory
to be within the boundaries of a single resource. We then get the
warning: "Unable to release resource" and attempting to use memtrace
again gives us this error: "bash: echo: write error: Resource
temporarily unavailable"
This patch makes memtrace remove memory in chunks that are always the
same size from an address that is always equal to end_of_memory -
n*size, for some n. So hotremoving and hotadding memory of different
sizes will now not attempt to remove memory that spans multiple
resources.
Signed-off-by: Rashmica Gupta <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/memtrace.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
--- a/arch/powerpc/platforms/powernv/memtrace.c
+++ b/arch/powerpc/platforms/powernv/memtrace.c
@@ -90,17 +90,15 @@ static bool memtrace_offline_pages(u32 n
walk_memory_range(start_pfn, end_pfn, (void *)MEM_OFFLINE,
change_memblock_state);
- lock_device_hotplug();
- remove_memory(nid, start_pfn << PAGE_SHIFT, nr_pages << PAGE_SHIFT);
- unlock_device_hotplug();
return true;
}
static u64 memtrace_alloc_node(u32 nid, u64 size)
{
- u64 start_pfn, end_pfn, nr_pages;
+ u64 start_pfn, end_pfn, nr_pages, pfn;
u64 base_pfn;
+ u64 bytes = memory_block_size_bytes();
if (!node_spanned_pages(nid))
return 0;
@@ -113,8 +111,21 @@ static u64 memtrace_alloc_node(u32 nid,
end_pfn = round_down(end_pfn - nr_pages, nr_pages);
for (base_pfn = end_pfn; base_pfn > start_pfn; base_pfn -= nr_pages) {
- if (memtrace_offline_pages(nid, base_pfn, nr_pages) == true)
+ if (memtrace_offline_pages(nid, base_pfn, nr_pages) == true) {
+ /*
+ * Remove memory in memory block size chunks so that
+ * iomem resources are always split to the same size and
+ * we never try to remove memory that spans two iomem
+ * resources.
+ */
+ lock_device_hotplug();
+ end_pfn = base_pfn + nr_pages;
+ for (pfn = base_pfn; pfn < end_pfn; pfn += bytes>> PAGE_SHIFT) {
+ remove_memory(nid, pfn << PAGE_SHIFT, bytes);
+ }
+ unlock_device_hotplug();
return base_pfn << PAGE_SHIFT;
+ }
}
return 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ziyuan Xu <[email protected]>
commit 82f4b67f018c88a7cc9337f0067ed3d6ec352648 upstream.
mmc sample shift is 0 for RK3328 referring to the TRM.
So fix them.
Fixes: fe3511ad8a1c ("clk: rockchip: add clock controller for rk3328")
Cc: [email protected]
Signed-off-by: Ziyuan Xu <[email protected]>
Signed-off-by: Shawn Lin <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/rockchip/clk-rk3328.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/clk/rockchip/clk-rk3328.c
+++ b/drivers/clk/rockchip/clk-rk3328.c
@@ -813,22 +813,22 @@ static struct rockchip_clk_branch rk3328
MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "clk_sdmmc",
RK3328_SDMMC_CON0, 1),
MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "clk_sdmmc",
- RK3328_SDMMC_CON1, 1),
+ RK3328_SDMMC_CON1, 0),
MMC(SCLK_SDIO_DRV, "sdio_drv", "clk_sdio",
RK3328_SDIO_CON0, 1),
MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "clk_sdio",
- RK3328_SDIO_CON1, 1),
+ RK3328_SDIO_CON1, 0),
MMC(SCLK_EMMC_DRV, "emmc_drv", "clk_emmc",
RK3328_EMMC_CON0, 1),
MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "clk_emmc",
- RK3328_EMMC_CON1, 1),
+ RK3328_EMMC_CON1, 0),
MMC(SCLK_SDMMC_EXT_DRV, "sdmmc_ext_drv", "clk_sdmmc_ext",
RK3328_SDMMC_EXT_CON0, 1),
MMC(SCLK_SDMMC_EXT_SAMPLE, "sdmmc_ext_sample", "clk_sdmmc_ext",
- RK3328_SDMMC_EXT_CON1, 1),
+ RK3328_SDMMC_EXT_CON1, 0),
};
static const char *const rk3328_critical_clocks[] __initconst = {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Kazlauskas <[email protected]>
[ Upstream commit 481f576c6c21bf0446eaa23623ef0262e9a5387c ]
[Why]
The DISPCLK value was previously requested to be 15% higher for all
ASICs that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and the dce110 set bandwidth codepath this
was removed for power saving considerations.
That change caused display corruption under certain hardware
configurations with Vega10.
[How]
The 15% DISPCLK increase is brought back but only on dce110 for now.
This is should be a temporary workaround until the root cause is sorted
out for why this occurs on Vega (or other ASICs, if reported).
Tested-by: Nick Sarnie <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Acked-by: Bhawanpreet Lakha <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c
@@ -466,6 +466,9 @@ static void dce12_update_clocks(struct d
{
struct dm_pp_clock_for_voltage_req clock_voltage_req = {0};
+ /* TODO: Investigate why this is needed to fix display corruption. */
+ new_clocks->dispclk_khz = new_clocks->dispclk_khz * 115 / 100;
+
if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, dccg->clks.dispclk_khz)) {
clock_voltage_req.clk_type = DM_PP_CLOCK_TYPE_DISPLAY_CLK;
clock_voltage_req.clocks_in_khz = new_clocks->dispclk_khz;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Giridhar Malavali <[email protected]>
commit bcc71cc3cde1468958a3ea859276d8d1a1a68265 upstream.
This patch fixes issue during switch command query where driver was freeing
SRB resources multiple times
Following stack trace will be seen
[ 853.436234] BUG: unable to handle kernel NULL pointer dereference at
0000000000000001
[ 853.436348] IP: [<ffffffff811df514>] kmem_cache_alloc+0x74/0x1e0
[ 853.436476] PGD 0
[ 853.436601] Oops: 0000 [#1] SMP
[ 853.454700] [<ffffffff81099f6a>] ? mod_timer+0x14a/0x220
[ 853.455543] [<ffffffff81185465>] mempool_alloc_slab+0x15/0x20
[ 853.456395] [<ffffffff811855a9>] mempool_alloc+0x69/0x170
[ 853.457257] [<ffffffff81098af2>] ? internal_add_timer+0x32/0x70
[ 853.458136] [<ffffffffc0092d2b>] qla2xxx_queuecommand+0x29b/0x3f0 [qla2xxx]
[ 853.459024] [<ffffffff8146535a>] scsi_dispatch_cmd+0xaa/0x230
[ 853.459923] [<ffffffff8146e11f>] scsi_request_fn+0x4df/0x680
[ 853.460829] [<ffffffff81029557>] ? __switch_to+0xd7/0x510
[ 853.461747] [<ffffffff812f7113>] __blk_run_queue+0x33/0x40
[ 853.462670] [<ffffffff812f7735>] blk_delay_work+0x25/0x40
[ 853.463603] [<ffffffff810a882a>] process_one_work+0x17a/0x440
[ 853.464546] [<ffffffff810a94f6>] worker_thread+0x126/0x3c0
[ 853.465501] [<ffffffff810a93d0>] ? manage_workers.isra.24+0x2a0/0x2a0
[ 853.466447] [<ffffffff810b099f>] kthread+0xcf/0xe0
[ 853.467379] [<ffffffff810b08d0>] ? insert_kthread_work+0x40/0x40
[ 853.470172] Code: db e2 7e 49 8b 50 08 4d 8b 20 49 8b 40 10 4d 85 e4 0f 84 20
01 00 00 48 85 c0 0f 84 17 01 00 00 49 63 46 20 48 8d 4a 01 4d 8b 06 <49> 8b 1c
04 4c 89 e0 65 49 0f c7 08 0f 94 c0 84 c0 74 ba 49 63
[ 853.472072] RIP [<ffffffff811df514>] kmem_cache_alloc+0x74/0x1e0
[ 853.472971] RSP <ffff88103726fc50>
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: <[email protected]>
Signed-off-by: Giridhar Malavali <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_gs.c | 3 +++
drivers/scsi/qla2xxx/qla_init.c | 15 +++++++++++++--
2 files changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -3261,6 +3261,9 @@ static void qla24xx_async_gpsc_sp_done(v
"Async done-%s res %x, WWPN %8phC \n",
sp->name, res, fcport->port_name);
+ if (res == QLA_FUNCTION_TIMEOUT)
+ return;
+
if (res == (DID_ERROR << 16)) {
/* entry status error */
goto done;
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -52,12 +52,14 @@ qla2x00_sp_timeout(struct timer_list *t)
struct srb_iocb *iocb;
struct req_que *req;
unsigned long flags;
+ struct qla_hw_data *ha = sp->vha->hw;
- spin_lock_irqsave(sp->qpair->qp_lock_ptr, flags);
+ WARN_ON(irqs_disabled());
+ spin_lock_irqsave(&ha->hardware_lock, flags);
req = sp->qpair->req;
req->outstanding_cmds[sp->handle] = NULL;
iocb = &sp->u.iocb_cmd;
- spin_unlock_irqrestore(sp->qpair->qp_lock_ptr, flags);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
iocb->timeout(sp);
}
@@ -972,6 +974,15 @@ void qla24xx_async_gpdb_sp_done(void *s,
fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE);
+ if (res == QLA_FUNCTION_TIMEOUT)
+ return;
+
+ if (res == QLA_FUNCTION_TIMEOUT) {
+ dma_pool_free(sp->vha->hw->s_dma_pool, sp->u.iocb_cmd.u.mbx.in,
+ sp->u.iocb_cmd.u.mbx.in_dma);
+ return;
+ }
+
memset(&ea, 0, sizeof(ea));
ea.event = FCME_GPDB_DONE;
ea.fcport = fcport;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit 5c6400536481d9ef44ef94e7bf2c7b8e81534db7 upstream.
This patch fixes issue where driver clears NPort ID map instead of marking
handle in use. Once driver clears NPort ID from the database, it can reuse
the same NPort ID resulting in a PLOGI failure.
[mkp: fixed Himanshu's SoB]
Fixes: a084fd68e1d2 ("scsi: qla2xxx: Fix re-login for Nport Handle in use")
Cc: <[email protected]>
Signed-of-by: Quinn Tran <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 18 ++++--------------
drivers/scsi/qla2xxx/qla_target.c | 3 ++-
2 files changed, 6 insertions(+), 15 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1954,25 +1954,15 @@ qla24xx_handle_plogi_done_event(struct s
cid.b.rsvd_1 = 0;
ql_dbg(ql_dbg_disc, vha, 0x20ec,
- "%s %d %8phC LoopID 0x%x in use post gnl\n",
+ "%s %d %8phC lid %#x in use with pid %06x post gnl\n",
__func__, __LINE__, ea->fcport->port_name,
- ea->fcport->loop_id);
+ ea->fcport->loop_id, cid.b24);
- if (IS_SW_RESV_ADDR(cid)) {
- set_bit(ea->fcport->loop_id, vha->hw->loop_id_map);
- ea->fcport->loop_id = FC_NO_LOOP_ID;
- } else {
- qla2x00_clear_loop_id(ea->fcport);
- }
+ set_bit(ea->fcport->loop_id, vha->hw->loop_id_map);
+ ea->fcport->loop_id = FC_NO_LOOP_ID;
qla24xx_post_gnl_work(vha, ea->fcport);
break;
case MBS_PORT_ID_USED:
- ql_dbg(ql_dbg_disc, vha, 0x20ed,
- "%s %d %8phC NPortId %02x%02x%02x inuse post gidpn\n",
- __func__, __LINE__, ea->fcport->port_name,
- ea->fcport->d_id.b.domain, ea->fcport->d_id.b.area,
- ea->fcport->d_id.b.al_pa);
-
lid = ea->iop[1] & 0xffff;
qlt_find_sess_invalidate_other(vha,
wwn_to_u64(ea->fcport->port_name),
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1261,7 +1261,8 @@ void qlt_schedule_sess_for_deletion(stru
qla24xx_chk_fcp_state(sess);
ql_dbg(ql_dbg_tgt, sess->vha, 0xe001,
- "Scheduling sess %p for deletion\n", sess);
+ "Scheduling sess %p for deletion %8phC\n",
+ sess, sess->port_name);
INIT_WORK(&sess->del_work, qla24xx_delete_sess_fn);
WARN_ON(!queue_work(sess->vha->hw->wq, &sess->del_work));
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
commit fef912bf860e upstream.
commit 98af4d4df889 upstream.
I got a report from Howard Chen that he saw zram and sysfs race(ie,
zram block device file is created but sysfs for it isn't yet)
when he tried to create new zram devices via hotadd knob.
v4.20 kernel fixes it by [1, 2] but it's too large size to merge
into -stable so this patch fixes the problem by registering defualt
group by Greg KH's approach[3].
This patch should be applied to every stable tree [3.16+] currently
existing from kernel.org because the problem was introduced at 2.6.37
by [4].
[1] fef912bf860e, block: genhd: add 'groups' argument to device_add_disk
[2] 98af4d4df889, zram: register default groups with device_add_disk()
[3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/
[4] 33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface
Cc: Sergey Senozhatsky <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: Howard Chen <[email protected]>
Signed-off-by: Minchan Kim <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/zram/zram_drv.c | 26 ++++++--------------------
1 file changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index a1d6b5597c17..66921427d109 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -1636,6 +1636,11 @@ static const struct attribute_group zram_disk_attr_group = {
.attrs = zram_disk_attrs,
};
+static const struct attribute_group *zram_disk_attr_groups[] = {
+ &zram_disk_attr_group,
+ NULL,
+};
+
/*
* Allocate and initialize new zram device. the function returns
* '>= 0' device_id upon success, and negative value otherwise.
@@ -1716,24 +1721,15 @@ static int zram_add(void)
zram->disk->queue->backing_dev_info->capabilities |=
(BDI_CAP_STABLE_WRITES | BDI_CAP_SYNCHRONOUS_IO);
+ disk_to_dev(zram->disk)->groups = zram_disk_attr_groups;
add_disk(zram->disk);
- ret = sysfs_create_group(&disk_to_dev(zram->disk)->kobj,
- &zram_disk_attr_group);
- if (ret < 0) {
- pr_err("Error creating sysfs group for device %d\n",
- device_id);
- goto out_free_disk;
- }
strlcpy(zram->compressor, default_compressor, sizeof(zram->compressor));
zram_debugfs_register(zram);
pr_info("Added device: %s\n", zram->disk->disk_name);
return device_id;
-out_free_disk:
- del_gendisk(zram->disk);
- put_disk(zram->disk);
out_free_queue:
blk_cleanup_queue(queue);
out_free_idr:
@@ -1762,16 +1758,6 @@ static int zram_remove(struct zram *zram)
mutex_unlock(&bdev->bd_mutex);
zram_debugfs_unregister(zram);
- /*
- * Remove sysfs first, so no one will perform a disksize
- * store while we destroy the devices. This also helps during
- * hot_remove -- zram_reset_device() is the last holder of
- * ->init_lock, no later/concurrent disksize_store() or any
- * other sysfs handlers are possible.
- */
- sysfs_remove_group(&disk_to_dev(zram->disk)->kobj,
- &zram_disk_attr_group);
-
/* Make sure all the pending I/O are finished */
fsync_bdev(bdev);
zram_reset_device(zram);
--
2.17.1
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quinn Tran <[email protected]>
commit f7d61c995df74d6bb57bbff6a2b7b1874c4a2baa upstream.
Send aborts only when chip is active.
Fixes: 623ee824e579 ("scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset")
Cc: <[email protected]> # 4.14
Signed-off-by: Quinn Tran <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_nvme.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -607,7 +607,7 @@ void qla_nvme_abort(struct qla_hw_data *
{
int rval;
- if (!test_bit(ABORT_ISP_ACTIVE, &sp->vha->dpc_flags)) {
+ if (ha->flags.fw_started) {
rval = ha->isp_ops->abort_command(sp);
if (!rval && !qla_nvme_wait_on_command(sp))
ql_log(ql_log_warn, NULL, 0x2112,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
[ Upstream commit 37ec35a6cc2b99eb7fd6b85b7d7b75dff46bc353 ]
This patch fixes a missing endian conversion in
vle_get_logical_extent_head.
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/erofs/unzip_vle.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/staging/erofs/unzip_vle.c
+++ b/drivers/staging/erofs/unzip_vle.c
@@ -1490,6 +1490,7 @@ static erofs_off_t vle_get_logical_exten
unsigned long long ofs;
const unsigned int clusterbits = EROFS_SB(inode->i_sb)->clusterbits;
const unsigned int clustersize = 1 << clusterbits;
+ unsigned int delta0;
if (page->index != blkaddr) {
kunmap_atomic(*kaddr_iter);
@@ -1504,12 +1505,13 @@ static erofs_off_t vle_get_logical_exten
di = *kaddr_iter + vle_extent_blkoff(inode, lcn);
switch (vle_cluster_type(di)) {
case Z_EROFS_VLE_CLUSTER_TYPE_NONHEAD:
- BUG_ON(!di->di_u.delta[0]);
- BUG_ON(lcn < di->di_u.delta[0]);
+ delta0 = le16_to_cpu(di->di_u.delta[0]);
+ DBG_BUGON(!delta0);
+ DBG_BUGON(lcn < delta0);
ofs = vle_get_logical_extent_head(inode,
page_iter, kaddr_iter,
- lcn - di->di_u.delta[0], pcn, flags);
+ lcn - delta0, pcn, flags);
break;
case Z_EROFS_VLE_CLUSTER_TYPE_PLAIN:
*flags ^= EROFS_MAP_ZIPPED;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Himanshu Madhani <[email protected]>
commit 4c1458df9635c7e3ced155f594d2e7dfd7254e21 upstream.
Fixes: 6246b8a1d26c7c ("[SCSI] qla2xxx: Enhancements to support ISP83xx.")
Fixes: 1bb395485160d2 ("qla2xxx: Correct iiDMA-update calling conventions.")
Cc: <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_mbx.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3762,10 +3762,7 @@ qla2x00_set_idma_speed(scsi_qla_host_t *
mcp->mb[0] = MBC_PORT_PARAMS;
mcp->mb[1] = loop_id;
mcp->mb[2] = BIT_0;
- if (IS_CNA_CAPABLE(vha->hw))
- mcp->mb[3] = port_speed & (BIT_5|BIT_4|BIT_3|BIT_2|BIT_1|BIT_0);
- else
- mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0);
+ mcp->mb[3] = port_speed & (BIT_5|BIT_4|BIT_3|BIT_2|BIT_1|BIT_0);
mcp->mb[9] = vha->vp_idx;
mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0;
mcp->in_mb = MBX_3|MBX_1|MBX_0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Mc Guire <[email protected]>
[ Upstream commit c5d59528e24ad22500347b199d52b9368e686a42 ]
altera_hw_filt_init() which calls append_internal() assumes
that the node was successfully linked in while in fact it can
silently fail. So the call-site needs to set return to -ENOMEM
on append_internal() returning NULL and exit through the err path.
Fixes: 349bcf02e361 ("[media] Altera FPGA based CI driver module")
Signed-off-by: Nicholas Mc Guire <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/pci/cx23885/altera-ci.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/media/pci/cx23885/altera-ci.c
+++ b/drivers/media/pci/cx23885/altera-ci.c
@@ -665,6 +665,10 @@ static int altera_hw_filt_init(struct al
}
temp_int = append_internal(inter);
+ if (!temp_int) {
+ ret = -ENOMEM;
+ goto err;
+ }
inter->filts_used = 1;
inter->dev = config->dev;
inter->fpga_rw = config->fpga_rw;
@@ -699,6 +703,7 @@ err:
__func__, ret);
kfree(pid_filt);
+ kfree(inter);
return ret;
}
@@ -733,6 +738,10 @@ int altera_ci_init(struct altera_ci_conf
}
temp_int = append_internal(inter);
+ if (!temp_int) {
+ ret = -ENOMEM;
+ goto err;
+ }
inter->cis_used = 1;
inter->dev = config->dev;
inter->fpga_rw = config->fpga_rw;
@@ -801,6 +810,7 @@ err:
ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret);
kfree(state);
+ kfree(inter);
return ret;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit d47748e5ae5af6572e520cc9767bbe70c22ea498 upstream.
Current behavior is to automatically disable metacopy if redirect_dir is
not enabled and proceed with the mount.
If "metacopy=on" mount option was given, then this behavior can confuse the
user: no mount failure, yet metacopy is disabled.
This patch makes metacopy=on imply redirect_dir=on.
The converse is also true: turning off full redirect with redirect_dir=
{off|follow|nofollow} will disable metacopy.
If both metacopy=on and redirect_dir={off|follow|nofollow} is specified,
then mount will fail, since there's no way to correctly resolve the
conflict.
Reported-by: Daniel Walsh <[email protected]>
Fixes: d5791044d2e5 ("ovl: Provide a mount option metacopy=on/off...")
Cc: <[email protected]> # v4.19
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/filesystems/overlayfs.txt | 6 +++++
fs/overlayfs/super.c | 36 +++++++++++++++++++++++++-------
2 files changed, 35 insertions(+), 7 deletions(-)
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -286,6 +286,12 @@ pointed by REDIRECT. This should not be
"trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible
for untrusted layers like from a pen drive.
+Note: redirect_dir={off|nofollow|follow(*)} conflicts with metacopy=on, and
+results in an error.
+
+(*) redirect_dir=follow only conflicts with metacopy=on if upperdir=... is
+given.
+
Sharing and copying layers
--------------------------
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -472,6 +472,7 @@ static int ovl_parse_opt(char *opt, stru
{
char *p;
int err;
+ bool metacopy_opt = false, redirect_opt = false;
config->redirect_mode = kstrdup(ovl_redirect_mode_def(), GFP_KERNEL);
if (!config->redirect_mode)
@@ -516,6 +517,7 @@ static int ovl_parse_opt(char *opt, stru
config->redirect_mode = match_strdup(&args[0]);
if (!config->redirect_mode)
return -ENOMEM;
+ redirect_opt = true;
break;
case OPT_INDEX_ON:
@@ -548,6 +550,7 @@ static int ovl_parse_opt(char *opt, stru
case OPT_METACOPY_ON:
config->metacopy = true;
+ metacopy_opt = true;
break;
case OPT_METACOPY_OFF:
@@ -572,13 +575,32 @@ static int ovl_parse_opt(char *opt, stru
if (err)
return err;
- /* metacopy feature with upper requires redirect_dir=on */
- if (config->upperdir && config->metacopy && !config->redirect_dir) {
- pr_warn("overlayfs: metadata only copy up requires \"redirect_dir=on\", falling back to metacopy=off.\n");
- config->metacopy = false;
- } else if (config->metacopy && !config->redirect_follow) {
- pr_warn("overlayfs: metadata only copy up requires \"redirect_dir=follow\" on non-upper mount, falling back to metacopy=off.\n");
- config->metacopy = false;
+ /*
+ * This is to make the logic below simpler. It doesn't make any other
+ * difference, since config->redirect_dir is only used for upper.
+ */
+ if (!config->upperdir && config->redirect_follow)
+ config->redirect_dir = true;
+
+ /* Resolve metacopy -> redirect_dir dependency */
+ if (config->metacopy && !config->redirect_dir) {
+ if (metacopy_opt && redirect_opt) {
+ pr_err("overlayfs: conflicting options: metacopy=on,redirect_dir=%s\n",
+ config->redirect_mode);
+ return -EINVAL;
+ }
+ if (redirect_opt) {
+ /*
+ * There was an explicit redirect_dir=... that resulted
+ * in this conflict.
+ */
+ pr_info("overlayfs: disabling metacopy due to redirect_dir=%s\n",
+ config->redirect_mode);
+ config->metacopy = false;
+ } else {
+ /* Automatically enable redirect otherwise. */
+ config->redirect_follow = config->redirect_dir = true;
+ }
}
return 0;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Paul <[email protected]>
[ Upstream commit 96fc56a775c1e44c0e3c0119f2cd3d77431c4569 ]
The atomic_check is a bit too aggressive with respect to planes which
leave the active area. This caused a bunch of log spew when the cursor
got to the edge of the screen and stopped it from going all the way.
This patch removes the conservative bounds checks from atomic and clips
the dst rect such that we properly display planes which go off the
screen.
Changes in v2:
- Apply the clip to src as well (taking into account scaling)
Changes in v3:
- Use drm_atomic_helper_check_plane_state() to clip src/dst
Cc: Sravanthi Kollukuduru <[email protected]>
Cc: Jeykumar Sankaran <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Jeykumar Sankaran <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 3 --
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 38 +++++++++++++++++------------
drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 1
drivers/gpu/drm/msm/msm_drv.h | 2 +
4 files changed, 26 insertions(+), 18 deletions(-)
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -1535,8 +1535,7 @@ static int dpu_crtc_atomic_check(struct
cnt++;
dst = drm_plane_state_dest(pstate);
- if (!drm_rect_intersect(&clip, &dst) ||
- !drm_rect_equals(&clip, &dst)) {
+ if (!drm_rect_intersect(&clip, &dst)) {
DPU_ERROR("invalid vertical/horizontal destination\n");
DPU_ERROR("display: " DRM_RECT_FMT " plane: "
DRM_RECT_FMT "\n", DRM_RECT_ARG(&crtc_rect),
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -1254,7 +1254,7 @@ static int dpu_plane_sspp_atomic_update(
const struct dpu_format *fmt;
struct drm_crtc *crtc;
struct drm_framebuffer *fb;
- struct drm_rect src, dst;
+ int ret, min_scale;
if (!plane) {
DPU_ERROR("invalid plane\n");
@@ -1293,21 +1293,29 @@ static int dpu_plane_sspp_atomic_update(
pdpu->is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
_dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
- src.x1 = state->src_x >> 16;
- src.y1 = state->src_y >> 16;
- src.x2 = src.x1 + (state->src_w >> 16);
- src.y2 = src.y1 + (state->src_h >> 16);
-
- dst = drm_plane_state_dest(state);
-
- DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FMT "->crtc%u " DRM_RECT_FMT
- ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_ARG(&src),
- crtc->base.id, DRM_RECT_ARG(&dst),
- (char *)&fmt->base.pixel_format,
- DPU_FORMAT_IS_UBWC(fmt));
+ min_scale = FRAC_16_16(1, pdpu->pipe_sblk->maxdwnscale);
+ ret = drm_atomic_helper_check_plane_state(state, crtc->state, min_scale,
+ pdpu->pipe_sblk->maxupscale << 16,
+ true, false);
+ if (ret) {
+ DPU_ERROR_PLANE(pdpu, "Check plane state failed (%d)\n", ret);
+ return ret;
+ }
+
+ DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
+ ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
+ crtc->base.id, DRM_RECT_ARG(&state->dst),
+ (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
+
+ pdpu->pipe_cfg.src_rect = state->src;
+
+ /* state->src is 16.16, src_rect is not */
+ pdpu->pipe_cfg.src_rect.x1 >>= 16;
+ pdpu->pipe_cfg.src_rect.x2 >>= 16;
+ pdpu->pipe_cfg.src_rect.y1 >>= 16;
+ pdpu->pipe_cfg.src_rect.y2 >>= 16;
- pdpu->pipe_cfg.src_rect = src;
- pdpu->pipe_cfg.dst_rect = dst;
+ pdpu->pipe_cfg.dst_rect = state->dst;
_dpu_plane_setup_scaler(pdpu, pstate, fmt, false);
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c
@@ -259,7 +259,6 @@ static void mdp5_plane_cleanup_fb(struct
msm_framebuffer_cleanup(fb, kms->aspace);
}
-#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
static int mdp5_plane_atomic_check_with_state(struct drm_crtc_state *crtc_state,
struct drm_plane_state *state)
{
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -62,6 +62,8 @@ struct msm_gem_vma;
#define MAX_BRIDGES 8
#define MAX_CONNECTORS 8
+#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
+
struct msm_file_private {
rwlock_t queuelock;
struct list_head submitqueues;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandru Ardelean <[email protected]>
[ Upstream commit 4ee033301c898dd0835d035d0e0eb768a3d35da1 ]
Fixes commit 17be2a2905a6ec9aa27cd59521495e2f490d2af0 ("staging: iio:
ad7606: replace range/range_available with corresponding scale").
The AD7606 devices don't have a 2.5V voltage range, they have 5V & 10V
voltage range, which is selectable via the `gpio_range` descriptor.
The scales also seem to have been miscomputed, because when they were
applied to the raw values, the results differ from the expected values.
After checking the ADC transfer function in the datasheet, these were
re-computed.
Signed-off-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/adc/ad7606.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/staging/iio/adc/ad7606.c
+++ b/drivers/staging/iio/adc/ad7606.c
@@ -26,9 +26,12 @@
#include "ad7606.h"
-/* Scales are computed as 2.5/2**16 and 5/2**16 respectively */
+/*
+ * Scales are computed as 5000/32768 and 10000/32768 respectively,
+ * so that when applied to the raw values they provide mV values
+ */
static const unsigned int scale_avail[2][2] = {
- {0, 38147}, {0, 76294}
+ {0, 152588}, {0, 305176}
};
static int ad7606_reset(struct ad7606_state *st)
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: SivapiriyanKumarasamy <[email protected]>
[ Upstream commit 30049754ab7c4b6148dd3cd64af7d54850604582 ]
[WHY]
Previously night light forced a full update by
applying a transfer function update regardless of if it was changed.
This logic was removed,
Now gamma surface updates are only applied when there is also a plane
info update, this does not work in cases such as using the night light
slider.
[HOW]
When moving the night light slider we will perform a full update if
the gamma has changed and there is a surface, even when the surface
has not changed. Also get stream updates in setgamma prior to
update planes and stream.
Signed-off-by: SivapiriyanKumarasamy <[email protected]>
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Bhawanpreet Lakha <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1120,9 +1120,6 @@ static enum surface_update_type get_plan
*/
update_flags->bits.bpp_change = 1;
- if (u->gamma && dce_use_lut(u->plane_info->format))
- update_flags->bits.gamma_change = 1;
-
if (memcmp(&u->plane_info->tiling_info, &u->surface->tiling_info,
sizeof(union dc_tiling_info)) != 0) {
update_flags->bits.swizzle_change = 1;
@@ -1139,7 +1136,6 @@ static enum surface_update_type get_plan
if (update_flags->bits.rotation_change
|| update_flags->bits.stereo_format_change
|| update_flags->bits.pixel_format_change
- || update_flags->bits.gamma_change
|| update_flags->bits.bpp_change
|| update_flags->bits.bandwidth_change
|| update_flags->bits.output_tf_change)
@@ -1229,13 +1225,26 @@ static enum surface_update_type det_surf
if (u->coeff_reduction_factor)
update_flags->bits.coeff_reduction_change = 1;
+ if (u->gamma) {
+ enum surface_pixel_format format = SURFACE_PIXEL_FORMAT_GRPH_BEGIN;
+
+ if (u->plane_info)
+ format = u->plane_info->format;
+ else if (u->surface)
+ format = u->surface->format;
+
+ if (dce_use_lut(format))
+ update_flags->bits.gamma_change = 1;
+ }
+
if (update_flags->bits.in_transfer_func_change) {
type = UPDATE_TYPE_MED;
elevate_update_type(&overall_type, type);
}
if (update_flags->bits.input_csc_change
- || update_flags->bits.coeff_reduction_change) {
+ || update_flags->bits.coeff_reduction_change
+ || update_flags->bits.gamma_change) {
type = UPDATE_TYPE_FULL;
elevate_update_type(&overall_type, type);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masami Hiramatsu <[email protected]>
[ Upstream commit 59158ec4aef7d44be51a6f3e7e17fc64c32604eb ]
Current kprobe event doesn't checks correctly whether the
given event is on unloaded module or not. It just checks
the event has ":" in the name.
That is not enough because if we define a probe on non-exist
symbol on loaded module, it allows to define that (with
warning message)
To ensure it correctly, this searches the module name on
loaded module list and only if there is not, it allows to
define it. (this event will be available when the target
module is loaded)
Link: http://lkml.kernel.org/r/153547309528.26502.8300278470528281328.stgit@devbox
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_kprobe.c | 39 ++++++++++++++++++++++++++-------------
1 file changed, 26 insertions(+), 13 deletions(-)
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -61,9 +61,23 @@ static nokprobe_inline bool trace_kprobe
return strncmp(mod->name, name, len) == 0 && name[len] == ':';
}
-static nokprobe_inline bool trace_kprobe_is_on_module(struct trace_kprobe *tk)
+static nokprobe_inline bool trace_kprobe_module_exist(struct trace_kprobe *tk)
{
- return !!strchr(trace_kprobe_symbol(tk), ':');
+ char *p;
+ bool ret;
+
+ if (!tk->symbol)
+ return false;
+ p = strchr(tk->symbol, ':');
+ if (!p)
+ return true;
+ *p = '\0';
+ mutex_lock(&module_mutex);
+ ret = !!find_module(tk->symbol);
+ mutex_unlock(&module_mutex);
+ *p = ':';
+
+ return ret;
}
static nokprobe_inline unsigned long trace_kprobe_nhit(struct trace_kprobe *tk)
@@ -554,19 +568,13 @@ static int __register_trace_kprobe(struc
else
ret = register_kprobe(&tk->rp.kp);
- if (ret == 0)
+ if (ret == 0) {
tk->tp.flags |= TP_FLAG_REGISTERED;
- else {
- if (ret == -ENOENT && trace_kprobe_is_on_module(tk)) {
- pr_warn("This probe might be able to register after target module is loaded. Continue.\n");
- ret = 0;
- } else if (ret == -EILSEQ) {
- pr_warn("Probing address(0x%p) is not an instruction boundary.\n",
- tk->rp.kp.addr);
- ret = -EINVAL;
- }
+ } else if (ret == -EILSEQ) {
+ pr_warn("Probing address(0x%p) is not an instruction boundary.\n",
+ tk->rp.kp.addr);
+ ret = -EINVAL;
}
-
return ret;
}
@@ -629,6 +637,11 @@ static int register_trace_kprobe(struct
/* Register k*probe */
ret = __register_trace_kprobe(tk);
+ if (ret == -ENOENT && !trace_kprobe_module_exist(tk)) {
+ pr_warn("This probe might be able to register after target module is loaded. Continue.\n");
+ ret = 0;
+ }
+
if (ret < 0)
unregister_kprobe_event(tk);
else
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 5d4f0edaa3ac4f1844ed7c64cd2bae6f1912bac5 upstream.
In the absence of a fallback, samples must provide a correct cpumode for
the 'ip'. Do that now there is no fallback.
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: [email protected] # 4.19
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-bts.c | 17 ++++++++++++-----
tools/perf/util/intel-pt.c | 22 +++++++++++++---------
2 files changed, 25 insertions(+), 14 deletions(-)
--- a/tools/perf/util/intel-bts.c
+++ b/tools/perf/util/intel-bts.c
@@ -269,6 +269,13 @@ static int intel_bts_do_fix_overlap(stru
return 0;
}
+static inline u8 intel_bts_cpumode(struct intel_bts *bts, uint64_t ip)
+{
+ return machine__kernel_ip(bts->machine, ip) ?
+ PERF_RECORD_MISC_KERNEL :
+ PERF_RECORD_MISC_USER;
+}
+
static int intel_bts_synth_branch_sample(struct intel_bts_queue *btsq,
struct branch *branch)
{
@@ -281,12 +288,8 @@ static int intel_bts_synth_branch_sample
bts->num_events++ <= bts->synth_opts.initial_skip)
return 0;
- event.sample.header.type = PERF_RECORD_SAMPLE;
- event.sample.header.misc = PERF_RECORD_MISC_USER;
- event.sample.header.size = sizeof(struct perf_event_header);
-
- sample.cpumode = PERF_RECORD_MISC_USER;
sample.ip = le64_to_cpu(branch->from);
+ sample.cpumode = intel_bts_cpumode(bts, sample.ip);
sample.pid = btsq->pid;
sample.tid = btsq->tid;
sample.addr = le64_to_cpu(branch->to);
@@ -298,6 +301,10 @@ static int intel_bts_synth_branch_sample
sample.insn_len = btsq->intel_pt_insn.length;
memcpy(sample.insn, btsq->intel_pt_insn.buf, INTEL_PT_INSN_BUF_SZ);
+ event.sample.header.type = PERF_RECORD_SAMPLE;
+ event.sample.header.misc = sample.cpumode;
+ event.sample.header.size = sizeof(struct perf_event_header);
+
if (bts->synth_opts.inject) {
event.sample.header.size = bts->branches_event_size;
ret = perf_event__synthesize_sample(&event,
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -407,6 +407,13 @@ intel_pt_cache_lookup(struct dso *dso, s
return auxtrace_cache__lookup(dso->auxtrace_cache, offset);
}
+static inline u8 intel_pt_cpumode(struct intel_pt *pt, uint64_t ip)
+{
+ return ip >= pt->kernel_start ?
+ PERF_RECORD_MISC_KERNEL :
+ PERF_RECORD_MISC_USER;
+}
+
static int intel_pt_walk_next_insn(struct intel_pt_insn *intel_pt_insn,
uint64_t *insn_cnt_ptr, uint64_t *ip,
uint64_t to_ip, uint64_t max_insn_cnt,
@@ -429,10 +436,7 @@ static int intel_pt_walk_next_insn(struc
if (to_ip && *ip == to_ip)
goto out_no_cache;
- if (*ip >= ptq->pt->kernel_start)
- cpumode = PERF_RECORD_MISC_KERNEL;
- else
- cpumode = PERF_RECORD_MISC_USER;
+ cpumode = intel_pt_cpumode(ptq->pt, *ip);
thread = ptq->thread;
if (!thread) {
@@ -1053,15 +1057,11 @@ static void intel_pt_prep_b_sample(struc
union perf_event *event,
struct perf_sample *sample)
{
- event->sample.header.type = PERF_RECORD_SAMPLE;
- event->sample.header.misc = PERF_RECORD_MISC_USER;
- event->sample.header.size = sizeof(struct perf_event_header);
-
if (!pt->timeless_decoding)
sample->time = tsc_to_perf_time(ptq->timestamp, &pt->tc);
- sample->cpumode = PERF_RECORD_MISC_USER;
sample->ip = ptq->state->from_ip;
+ sample->cpumode = intel_pt_cpumode(pt, sample->ip);
sample->pid = ptq->pid;
sample->tid = ptq->tid;
sample->addr = ptq->state->to_ip;
@@ -1070,6 +1070,10 @@ static void intel_pt_prep_b_sample(struc
sample->flags = ptq->flags;
sample->insn_len = ptq->insn_len;
memcpy(sample->insn, ptq->insn, INTEL_PT_INSN_BUF_SZ);
+
+ event->sample.header.type = PERF_RECORD_SAMPLE;
+ event->sample.header.misc = sample->cpumode;
+ event->sample.header.size = sizeof(struct perf_event_header);
}
static int intel_pt_inject_event(union perf_event *event,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Brezillon <[email protected]>
commit d098093ba06eb032057d1aca1c2e45889e099d00 upstream.
nanddev_neraseblocks() currently returns the number pages per LUN
instead of the total number of eraseblocks.
Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices")
Cc: <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mtd/nand.h | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -324,9 +324,8 @@ static inline unsigned int nanddev_ntarg
*/
static inline unsigned int nanddev_neraseblocks(const struct nand_device *nand)
{
- return (u64)nand->memorg.luns_per_target *
- nand->memorg.eraseblocks_per_lun *
- nand->memorg.pages_per_eraseblock;
+ return nand->memorg.ntargets * nand->memorg.luns_per_target *
+ nand->memorg.eraseblocks_per_lun;
}
/**
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 568fb6f42ac6851320adaea25f8f1b94de14e40a upstream.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p"),
all pointers printed with %p are printed with hashed addresses
instead of real addresses in order to avoid leaking addresses in
dmesg and syslog. But this applies to kdb too, with is unfortunate:
Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry
kdb> ps
15 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr Pid Parent [*] cpu State Thread Command
0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh
0x(ptrval) 1 0 0 0 S 0x(ptrval) init
0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp
0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp
0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0
0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H
0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0
0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq
0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt
The whole purpose of kdb is to debug, and for debugging real addresses
need to be known. In addition, data displayed by kdb doesn't go into
dmesg.
This patch replaces all %p by %px in kdb in order to display real
addresses.
Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Daniel Thompson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/debug/kdb/kdb_main.c | 14 +++++++-------
kernel/debug/kdb/kdb_support.c | 12 ++++++------
2 files changed, 13 insertions(+), 13 deletions(-)
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -1192,7 +1192,7 @@ static int kdb_local(kdb_reason_t reason
if (reason == KDB_REASON_DEBUG) {
/* special case below */
} else {
- kdb_printf("\nEntering kdb (current=0x%p, pid %d) ",
+ kdb_printf("\nEntering kdb (current=0x%px, pid %d) ",
kdb_current, kdb_current ? kdb_current->pid : 0);
#if defined(CONFIG_SMP)
kdb_printf("on processor %d ", raw_smp_processor_id());
@@ -1208,7 +1208,7 @@ static int kdb_local(kdb_reason_t reason
*/
switch (db_result) {
case KDB_DB_BPT:
- kdb_printf("\nEntering kdb (0x%p, pid %d) ",
+ kdb_printf("\nEntering kdb (0x%px, pid %d) ",
kdb_current, kdb_current->pid);
#if defined(CONFIG_SMP)
kdb_printf("on processor %d ", raw_smp_processor_id());
@@ -2048,7 +2048,7 @@ static int kdb_lsmod(int argc, const cha
if (mod->state == MODULE_STATE_UNFORMED)
continue;
- kdb_printf("%-20s%8u 0x%p ", mod->name,
+ kdb_printf("%-20s%8u 0x%px ", mod->name,
mod->core_layout.size, (void *)mod);
#ifdef CONFIG_MODULE_UNLOAD
kdb_printf("%4d ", module_refcount(mod));
@@ -2059,7 +2059,7 @@ static int kdb_lsmod(int argc, const cha
kdb_printf(" (Loading)");
else
kdb_printf(" (Live)");
- kdb_printf(" 0x%p", mod->core_layout.base);
+ kdb_printf(" 0x%px", mod->core_layout.base);
#ifdef CONFIG_MODULE_UNLOAD
{
@@ -2341,7 +2341,7 @@ void kdb_ps1(const struct task_struct *p
return;
cpu = kdb_process_cpu(p);
- kdb_printf("0x%p %8d %8d %d %4d %c 0x%p %c%s\n",
+ kdb_printf("0x%px %8d %8d %d %4d %c 0x%px %c%s\n",
(void *)p, p->pid, p->parent->pid,
kdb_task_has_cpu(p), kdb_process_cpu(p),
kdb_task_state_char(p),
@@ -2354,7 +2354,7 @@ void kdb_ps1(const struct task_struct *p
} else {
if (KDB_TSK(cpu) != p)
kdb_printf(" Error: does not match running "
- "process table (0x%p)\n", KDB_TSK(cpu));
+ "process table (0x%px)\n", KDB_TSK(cpu));
}
}
}
@@ -2692,7 +2692,7 @@ int kdb_register_flags(char *cmd,
for_each_kdbcmd(kp, i) {
if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) {
kdb_printf("Duplicate kdb command registered: "
- "%s, func %p help %s\n", cmd, func, help);
+ "%s, func %px help %s\n", cmd, func, help);
return 1;
}
}
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -40,7 +40,7 @@
int kdbgetsymval(const char *symname, kdb_symtab_t *symtab)
{
if (KDB_DEBUG(AR))
- kdb_printf("kdbgetsymval: symname=%s, symtab=%p\n", symname,
+ kdb_printf("kdbgetsymval: symname=%s, symtab=%px\n", symname,
symtab);
memset(symtab, 0, sizeof(*symtab));
symtab->sym_start = kallsyms_lookup_name(symname);
@@ -88,7 +88,7 @@ int kdbnearsym(unsigned long addr, kdb_s
char *knt1 = NULL;
if (KDB_DEBUG(AR))
- kdb_printf("kdbnearsym: addr=0x%lx, symtab=%p\n", addr, symtab);
+ kdb_printf("kdbnearsym: addr=0x%lx, symtab=%px\n", addr, symtab);
memset(symtab, 0, sizeof(*symtab));
if (addr < 4096)
@@ -149,7 +149,7 @@ int kdbnearsym(unsigned long addr, kdb_s
symtab->mod_name = "kernel";
if (KDB_DEBUG(AR))
kdb_printf("kdbnearsym: returns %d symtab->sym_start=0x%lx, "
- "symtab->mod_name=%p, symtab->sym_name=%p (%s)\n", ret,
+ "symtab->mod_name=%px, symtab->sym_name=%px (%s)\n", ret,
symtab->sym_start, symtab->mod_name, symtab->sym_name,
symtab->sym_name);
@@ -887,13 +887,13 @@ void debug_kusage(void)
__func__, dah_first);
if (dah_first) {
h_used = (struct debug_alloc_header *)debug_alloc_pool;
- kdb_printf("%s: h_used %p size %d\n", __func__, h_used,
+ kdb_printf("%s: h_used %px size %d\n", __func__, h_used,
h_used->size);
}
do {
h_used = (struct debug_alloc_header *)
((char *)h_free + dah_overhead + h_free->size);
- kdb_printf("%s: h_used %p size %d caller %p\n",
+ kdb_printf("%s: h_used %px size %d caller %px\n",
__func__, h_used, h_used->size, h_used->caller);
h_free = (struct debug_alloc_header *)
(debug_alloc_pool + h_free->next);
@@ -902,7 +902,7 @@ void debug_kusage(void)
((char *)h_free + dah_overhead + h_free->size);
if ((char *)h_used - debug_alloc_pool !=
sizeof(debug_alloc_pool_aligned))
- kdb_printf("%s: h_used %p size %d caller %p\n",
+ kdb_printf("%s: h_used %px size %d caller %px\n",
__func__, h_used, h_used->size, h_used->caller);
out:
spin_unlock(&dap_lock);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
commit 11023d3f5fdf89bba5e1142127701ca6e6014587 upstream.
If we attempt to deduplicate the last block of a file A into the middle of
a file B, and file A's size is not a multiple of the block size, we end
rounding the deduplication length to 0 bytes, to avoid the data corruption
issue fixed by commit de02b9f6bb65 ("Btrfs: fix data corruption when
deduplicating between different files"). However a length of zero will
cause the insertion of an extent state with a start value greater (by 1)
then the end value, leading to a corrupt extent state that will trigger a
warning and cause chaos such as an infinite loop during inode eviction.
Example trace:
[96049.833585] ------------[ cut here ]------------
[96049.833714] WARNING: CPU: 0 PID: 24448 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs]
[96049.833767] CPU: 0 PID: 24448 Comm: xfs_io Not tainted 4.19.0-rc7-btrfs-next-39 #1
[96049.833768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[96049.833780] RIP: 0010:insert_state+0x101/0x120 [btrfs]
[96049.833783] RSP: 0018:ffffafd2c3707af0 EFLAGS: 00010282
[96049.833785] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006
[96049.833786] RDX: 0000000000000007 RSI: ffff99045c143230 RDI: ffff99047b2168a0
[96049.833787] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000
[96049.833787] R10: ffffafd2c3707ab8 R11: 0000000000000000 R12: ffff9903b93b12c8
[96049.833788] R13: 000000000004e000 R14: ffffafd2c3707b80 R15: ffffafd2c3707b78
[96049.833790] FS: 00007f5c14e7d700(0000) GS:ffff99047b200000(0000) knlGS:0000000000000000
[96049.833791] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[96049.833792] CR2: 00007f5c146abff8 CR3: 0000000115f4c004 CR4: 00000000003606f0
[96049.833795] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[96049.833796] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[96049.833796] Call Trace:
[96049.833809] __set_extent_bit+0x46c/0x6a0 [btrfs]
[96049.833823] lock_extent_bits+0x6b/0x210 [btrfs]
[96049.833831] ? _raw_spin_unlock+0x24/0x30
[96049.833841] ? test_range_bit+0xdf/0x130 [btrfs]
[96049.833853] lock_extent_range+0x8e/0x150 [btrfs]
[96049.833864] btrfs_double_extent_lock+0x78/0xb0 [btrfs]
[96049.833875] btrfs_extent_same_range+0x14e/0x550 [btrfs]
[96049.833885] ? rcu_read_lock_sched_held+0x3f/0x70
[96049.833890] ? __kmalloc_node+0x2b0/0x2f0
[96049.833899] ? btrfs_dedupe_file_range+0x19a/0x280 [btrfs]
[96049.833909] btrfs_dedupe_file_range+0x270/0x280 [btrfs]
[96049.833916] vfs_dedupe_file_range_one+0xd9/0xe0
[96049.833919] vfs_dedupe_file_range+0x131/0x1b0
[96049.833924] do_vfs_ioctl+0x272/0x6e0
[96049.833927] ? __fget+0x113/0x200
[96049.833931] ksys_ioctl+0x70/0x80
[96049.833933] __x64_sys_ioctl+0x16/0x20
[96049.833937] do_syscall_64+0x60/0x1b0
[96049.833939] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[96049.833941] RIP: 0033:0x7f5c1478ddd7
[96049.833943] RSP: 002b:00007ffe15b196a8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[96049.833945] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1478ddd7
[96049.833946] RDX: 00005625ece322d0 RSI: 00000000c0189436 RDI: 0000000000000004
[96049.833947] RBP: 0000000000000000 R08: 00007f5c14a46f48 R09: 0000000000000040
[96049.833948] R10: 0000000000000541 R11: 0000000000000202 R12: 0000000000000000
[96049.833949] R13: 0000000000000000 R14: 0000000000000004 R15: 00005625ece322d0
[96049.833954] irq event stamp: 6196
[96049.833956] hardirqs last enabled at (6195): [<ffffffff91b00663>] console_unlock+0x503/0x640
[96049.833958] hardirqs last disabled at (6196): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c
[96049.833959] softirqs last enabled at (6114): [<ffffffff92600370>] __do_softirq+0x370/0x421
[96049.833964] softirqs last disabled at (6095): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0
[96049.833965] ---[ end trace db7b05f01b7fa10c ]---
[96049.935816] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910
[96049.935822] irq event stamp: 6584
[96049.935823] hardirqs last enabled at (6583): [<ffffffff91b00663>] console_unlock+0x503/0x640
[96049.935825] hardirqs last disabled at (6584): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c
[96049.935827] softirqs last enabled at (6328): [<ffffffff92600370>] __do_softirq+0x370/0x421
[96049.935828] softirqs last disabled at (6313): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0
[96049.935829] ---[ end trace db7b05f01b7fa123 ]---
[96049.935840] ------------[ cut here ]------------
[96049.936065] WARNING: CPU: 1 PID: 24463 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs]
[96049.936107] CPU: 1 PID: 24463 Comm: umount Tainted: G W 4.19.0-rc7-btrfs-next-39 #1
[96049.936108] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[96049.936117] RIP: 0010:insert_state+0x101/0x120 [btrfs]
[96049.936119] RSP: 0018:ffffafd2c3637bc0 EFLAGS: 00010282
[96049.936120] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006
[96049.936121] RDX: 0000000000000007 RSI: ffff990445cf88e0 RDI: ffff99047b2968a0
[96049.936122] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000
[96049.936123] R10: ffffafd2c3637b88 R11: 0000000000000000 R12: ffff9904574301e8
[96049.936124] R13: 000000000004e000 R14: ffffafd2c3637c50 R15: ffffafd2c3637c48
[96049.936125] FS: 00007fe4b87e72c0(0000) GS:ffff99047b280000(0000) knlGS:0000000000000000
[96049.936126] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[96049.936128] CR2: 00005562e52618d8 CR3: 00000001151c8005 CR4: 00000000003606e0
[96049.936129] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[96049.936131] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[96049.936131] Call Trace:
[96049.936141] __set_extent_bit+0x46c/0x6a0 [btrfs]
[96049.936154] lock_extent_bits+0x6b/0x210 [btrfs]
[96049.936167] btrfs_evict_inode+0x1e1/0x5a0 [btrfs]
[96049.936172] evict+0xbf/0x1c0
[96049.936174] dispose_list+0x51/0x80
[96049.936176] evict_inodes+0x193/0x1c0
[96049.936180] generic_shutdown_super+0x3f/0x110
[96049.936182] kill_anon_super+0xe/0x30
[96049.936189] btrfs_kill_super+0x13/0x100 [btrfs]
[96049.936191] deactivate_locked_super+0x3a/0x70
[96049.936193] cleanup_mnt+0x3b/0x80
[96049.936195] task_work_run+0x93/0xc0
[96049.936198] exit_to_usermode_loop+0xfa/0x100
[96049.936201] do_syscall_64+0x17f/0x1b0
[96049.936202] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[96049.936204] RIP: 0033:0x7fe4b80cfb37
[96049.936206] RSP: 002b:00007ffff092b688 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[96049.936207] RAX: 0000000000000000 RBX: 00005562e5259060 RCX: 00007fe4b80cfb37
[96049.936208] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00005562e525faa0
[96049.936209] RBP: 00005562e525faa0 R08: 00005562e525f770 R09: 0000000000000015
[96049.936210] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fe4b85d1e64
[96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910
[96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910
[96049.936216] irq event stamp: 6616
[96049.936219] hardirqs last enabled at (6615): [<ffffffff91b00663>] console_unlock+0x503/0x640
[96049.936219] hardirqs last disabled at (6616): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c
[96049.936222] softirqs last enabled at (6328): [<ffffffff92600370>] __do_softirq+0x370/0x421
[96049.936222] softirqs last disabled at (6313): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0
[96049.936223] ---[ end trace db7b05f01b7fa124 ]---
The second stack trace, from inode eviction, is repeated forever due to
the infinite loop during eviction.
This is the same type of problem fixed way back in 2015 by commit
113e8283869b ("Btrfs: fix inode eviction infinite loop after extent_same
ioctl") and commit ccccf3d67294 ("Btrfs: fix inode eviction infinite loop
after cloning into it").
So fix this by returning immediately if the deduplication range length
gets rounded down to 0 bytes, as there is nothing that needs to be done in
such case.
Example reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xe6 0 100" /mnt/foo
$ xfs_io -f -c "pwrite -S 0xe6 0 1M" /mnt/bar
# Unmount the filesystem and mount it again so that we start without any
# extent state records when we ask for the deduplication.
$ umount /mnt
$ mount /dev/sdb /mnt
$ xfs_io -c "dedupe /mnt/foo 0 500K 100" /mnt/bar
# This unmount triggers the infinite loop.
$ umount /mnt
A test case for fstests will follow soon.
Fixes: de02b9f6bb65 ("Btrfs: fix data corruption when deduplicating between different files")
CC: <[email protected]> # 4.19+
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/ioctl.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3489,6 +3489,8 @@ static int btrfs_extent_same_range(struc
const u64 sz = BTRFS_I(src)->root->fs_info->sectorsize;
len = round_down(i_size_read(src), sz) - loff;
+ if (len == 0)
+ return 0;
olen = len;
}
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Sorenson <[email protected]>
commit 5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb upstream.
When truncating the encode buffer, the page_ptr is getting
advanced, causing the next page to be skipped while encoding.
The page is still included in the response, so the response
contains a page of bogus data.
We need to adjust the page_ptr backwards to ensure we encode
the next page into the correct place.
We saw this triggered when concurrent directory modifications caused
nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting
call to xdr_truncate_encode() corrupted the READDIR reply.
Signed-off-by: Frank Sorenson <[email protected]>
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/xdr.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -639,11 +639,10 @@ void xdr_truncate_encode(struct xdr_stre
WARN_ON_ONCE(xdr->iov);
return;
}
- if (fraglen) {
+ if (fraglen)
xdr->end = head->iov_base + head->iov_len;
- xdr->page_ptr--;
- }
/* (otherwise assume xdr->end is already set) */
+ xdr->page_ptr--;
head->iov_len = len;
buf->len = len;
xdr->p = head->iov_base + head->iov_len;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Czerner <[email protected]>
commit ebacb81273599555a7a19f7754a1451206a5fc4f upstream.
In async IO blocking case the additional reference to the io is taken for
it to survive fuse_aio_complete(). In non blocking case this additional
reference is not needed, however we still reference io to figure out
whether to wait for completion or not. This is wrong and will lead to
use-after-free. Fix it by storing blocking information in separate
variable.
This was spotted by KASAN when running generic/208 fstest.
Signed-off-by: Lukas Czerner <[email protected]>
Reported-by: Zorro Lang <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: 744742d692e3 ("fuse: Add reference counting for fuse_io_priv")
Cc: <[email protected]> # v4.6
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/file.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2913,10 +2913,12 @@ fuse_direct_IO(struct kiocb *iocb, struc
}
if (io->async) {
+ bool blocking = io->blocking;
+
fuse_aio_complete(io, ret < 0 ? ret : 0, -1);
/* we have a non-extending, async request, so return */
- if (!io->blocking)
+ if (!blocking)
return -EIOCBQUEUED;
wait_for_completion(&wait);
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Kravetz <[email protected]>
commit 5e41540c8a0f0e98c337dda8b391e5dda0cde7cf upstream.
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Prakash Sangappa <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/hugetlb.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3233,7 +3233,7 @@ static int is_hugetlb_entry_hwpoisoned(p
int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
struct vm_area_struct *vma)
{
- pte_t *src_pte, *dst_pte, entry;
+ pte_t *src_pte, *dst_pte, entry, dst_entry;
struct page *ptepage;
unsigned long addr;
int cow;
@@ -3261,15 +3261,30 @@ int copy_hugetlb_page_range(struct mm_st
break;
}
- /* If the pagetables are shared don't copy or take references */
- if (dst_pte == src_pte)
+ /*
+ * If the pagetables are shared don't copy or take references.
+ * dst_pte == src_pte is the common case of src/dest sharing.
+ *
+ * However, src could have 'unshared' and dst shares with
+ * another vma. If dst_pte !none, this implies sharing.
+ * Check here before taking page table lock, and once again
+ * after taking the lock below.
+ */
+ dst_entry = huge_ptep_get(dst_pte);
+ if ((dst_pte == src_pte) || !huge_pte_none(dst_entry))
continue;
dst_ptl = huge_pte_lock(h, dst, dst_pte);
src_ptl = huge_pte_lockptr(h, src, src_pte);
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
entry = huge_ptep_get(src_pte);
- if (huge_pte_none(entry)) { /* skip none entry */
+ dst_entry = huge_ptep_get(dst_pte);
+ if (huge_pte_none(entry) || !huge_pte_none(dst_entry)) {
+ /*
+ * Skip if src entry none. Also, skip in the
+ * unlikely case dst entry !none as this implies
+ * sharing with another vma.
+ */
;
} else if (unlikely(is_hugetlb_entry_migration(entry) ||
is_hugetlb_entry_hwpoisoned(entry))) {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roman Gushchin <[email protected]>
commit a76cf1a474d7dbcd9336b5f5afb0162baa142cf0 upstream.
Spock reported that commit 172b06c32b94 ("mm: slowly shrink slabs with a
relatively small number of objects") leads to a regression on his setup:
periodically the majority of the pagecache is evicted without an obvious
reason, while before the change the amount of free memory was balancing
around the watermark.
The reason behind is that the mentioned above change created some
minimal background pressure on the inode cache. The problem is that if
an inode is considered to be reclaimed, all belonging pagecache page are
stripped, no matter how many of them are there. So, if a huge
multi-gigabyte file is cached in the memory, and the goal is to reclaim
only few slab objects (unused inodes), we still can eventually evict all
gigabytes of the pagecache at once.
The workload described by Spock has few large non-mapped files in the
pagecache, so it's especially noticeable.
To solve the problem let's postpone the reclaim of inodes, which have
more than 1 attached page. Let's wait until the pagecache pages will be
evicted naturally by scanning the corresponding LRU lists, and only then
reclaim the inode structure.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin <[email protected]>
Reported-by: Spock <[email protected]>
Tested-by: Spock <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: <[email protected]> [4.19.x]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/inode.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -730,8 +730,11 @@ static enum lru_status inode_lru_isolate
return LRU_REMOVED;
}
- /* recently referenced inodes get one more pass */
- if (inode->i_state & I_REFERENCED) {
+ /*
+ * Recently referenced inodes and inodes with many attached pages
+ * get one more pass.
+ */
+ if (inode->i_state & I_REFERENCED || inode->i_data.nrpages > 1) {
inode->i_state &= ~I_REFERENCED;
spin_unlock(&inode->i_lock);
return LRU_ROTATE;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rex Zhu <[email protected]>
commit 3df27645395e8f79c0dc20a15cf1da61f376000d upstream.
fix a typo in for loop: i->j
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c
@@ -574,7 +574,7 @@ void amdgpu_vmid_mgr_init(struct amdgpu_
/* skip over VMID 0, since it is the system VM */
for (j = 1; j < id_mgr->num_ids; ++j) {
amdgpu_vmid_reset(adev, i, j);
- amdgpu_sync_create(&id_mgr->ids[i].active);
+ amdgpu_sync_create(&id_mgr->ids[j].active);
list_add_tail(&id_mgr->ids[j].list, &id_mgr->ids_lru);
}
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <[email protected]>
commit e96550956fbcd090629c0e2b5b8cded2eded2adf upstream.
With the exception of modesets which would switch the DPMS state of a
connector from on to off, we want to make sure that we disallow all
modesets which would result in enabling a new monitor or a new mode
configuration on a monitor if the connector for the display in question
is no longer registered. This allows us to stop userspace from trying to
enable new displays on connectors for an MST topology that were just
removed from the system, without preventing userspace from disabling
DPMS on those connectors.
Changes since v5:
- Fix typo in comment, nothing else
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4d80273976bf880c4bed9359b8f2d45663140c86)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_atomic_helper.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -307,6 +307,26 @@ update_connector_routing(struct drm_atom
return 0;
}
+ crtc_state = drm_atomic_get_new_crtc_state(state,
+ new_connector_state->crtc);
+ /*
+ * For compatibility with legacy users, we want to make sure that
+ * we allow DPMS On->Off modesets on unregistered connectors. Modesets
+ * which would result in anything else must be considered invalid, to
+ * avoid turning on new displays on dead connectors.
+ *
+ * Since the connector can be unregistered at any point during an
+ * atomic check or commit, this is racy. But that's OK: all we care
+ * about is ensuring that userspace can't do anything but shut off the
+ * display on a connector that was destroyed after its been notified,
+ * not before.
+ */
+ if (!READ_ONCE(connector->registered) && crtc_state->active) {
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n",
+ connector->base.id, connector->name);
+ return -EINVAL;
+ }
+
funcs = connector->helper_private;
if (funcs->atomic_best_encoder)
@@ -351,7 +371,6 @@ update_connector_routing(struct drm_atom
set_best_encoder(state, new_connector_state, new_encoder);
- crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc);
crtc_state->connectors_changed = true;
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n",
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit 2d84a2d19b6150c6dbac1e6ebad9c82e4c123772 upstream.
In current fuse_drop_waiting() implementation it's possible that
fuse_wait_aborted() will not be woken up in the unlikely case that
fuse_abort_conn() + fuse_wait_aborted() runs in between checking
fc->connected and calling atomic_dec(&fc->num_waiting).
Do the atomic_dec_and_test() unconditionally, which also provides the
necessary barrier against reordering with the fc->connected check.
The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since
the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE
barrier after resetting fc->connected. However, this is not a performance
sensitive path, and adding the explicit barrier makes it easier to
document.
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests")
Cc: <[email protected]> #v4.19
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -129,9 +129,13 @@ static bool fuse_block_alloc(struct fuse
static void fuse_drop_waiting(struct fuse_conn *fc)
{
- if (fc->connected) {
- atomic_dec(&fc->num_waiting);
- } else if (atomic_dec_and_test(&fc->num_waiting)) {
+ /*
+ * lockess check of fc->connected is okay, because atomic_dec_and_test()
+ * provides a memory barrier mached with the one in fuse_wait_aborted()
+ * to ensure no wake-up is missed.
+ */
+ if (atomic_dec_and_test(&fc->num_waiting) &&
+ !READ_ONCE(fc->connected)) {
/* wake up aborters */
wake_up_all(&fc->blocked_waitq);
}
@@ -2167,6 +2171,8 @@ EXPORT_SYMBOL_GPL(fuse_abort_conn);
void fuse_wait_aborted(struct fuse_conn *fc)
{
+ /* matches implicit memory barrier in fuse_drop_waiting() */
+ smp_mb();
wait_event(fc->blocked_waitq, atomic_read(&fc->num_waiting) == 0);
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 25d202ed820ee347edec0bf3bf553544556bf64b upstream.
It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.
Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held. As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.
Cc: [email protected]
Reported-by: Al Viro <[email protected]>
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namespace.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1540,8 +1540,13 @@ static int do_umount(struct mount *mnt,
namespace_lock();
lock_mount_hash();
- event++;
+ /* Recheck MNT_LOCKED with the locks held */
+ retval = -EINVAL;
+ if (mnt->mnt.mnt_flags & MNT_LOCKED)
+ goto out;
+
+ event++;
if (flags & MNT_DETACH) {
if (!list_empty(&mnt->mnt_list))
umount_tree(mnt, UMOUNT_PROPAGATE);
@@ -1555,6 +1560,7 @@ static int do_umount(struct mount *mnt,
retval = 0;
}
}
+out:
unlock_mount_hash();
namespace_unlock();
return retval;
@@ -1645,7 +1651,7 @@ int ksys_umount(char __user *name, int f
goto dput_and_out;
if (!check_mnt(mnt))
goto dput_and_out;
- if (mnt->mnt.mnt_flags & MNT_LOCKED)
+ if (mnt->mnt.mnt_flags & MNT_LOCKED) /* Check optimistically */
goto dput_and_out;
retval = -EPERM;
if (flags & MNT_FORCE && !capable(CAP_SYS_ADMIN))
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit de59fae0043f07de5d25e02ca360f7d57bfa5866 upstream.
Fixes: dc6982ff4db1 ("ext4: refactor code to read directory blocks ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.9
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -126,6 +126,7 @@ static struct buffer_head *__ext4_read_d
if (!is_dx_block && type == INDEX) {
ext4_error_inode(inode, func, line, block,
"directory leaf block found instead of index block");
+ brelse(bh);
return ERR_PTR(-EFSCORRUPTED);
}
if (!ext4_has_metadata_csum(inode->i_sb) ||
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <[email protected]>
commit 7c4512300cfa5a4dcc8c1c52ae61e3fa4bd11a39 upstream.
This hasn't caused any issues yet that I'm aware of, but as Ville
Syrjälä pointed out - we need to make sure that
intel_connector->mst_port is set before initializing MST connectors,
since in theory we could potentially check intel_connector->mst_port in
i915_hpd_poll_init_work() after registering the connector but before
having written it's value.
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 66a5ab1034be801630816d1fa6cfc30db1a2f0b0)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_dp_mst.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -458,6 +458,10 @@ static struct drm_connector *intel_dp_ad
if (!intel_connector)
return NULL;
+ intel_connector->get_hw_state = intel_dp_mst_get_hw_state;
+ intel_connector->mst_port = intel_dp;
+ intel_connector->port = port;
+
connector = &intel_connector->base;
ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
DRM_MODE_CONNECTOR_DisplayPort);
@@ -468,10 +472,6 @@ static struct drm_connector *intel_dp_ad
drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs);
- intel_connector->get_hw_state = intel_dp_mst_get_hw_state;
- intel_connector->mst_port = intel_dp;
- intel_connector->port = port;
-
for_each_pipe(dev_priv, pipe) {
struct drm_encoder *enc =
&intel_dp->mst_encoders[pipe]->base.base;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <[email protected]>
commit 44a7276b30c3c15f2b7790a5729640597fb6a1df upstream.
In my haste to remove irq_port[] I accidentally changed the
way we deal with hpd pins that are shared by multiple encoders
(DP and HDMI for pre-DDI platforms). Previously we would only
handle such pins via ->hpd_pulse(), but now we queue up the
hotplug work for the HDMI encoder directly. Worse yet, we now
count each hpd twice and this increment the hpd storm count
twice as fast. This can lead to spurious storms being detected.
Go back to the old way of doing things, ie. delegate to
->hpd_pulse() for any pin which has an encoder with that hook
implemented. I don't really like the idea of adding irq_port[]
back so let's loop through the encoders first to check if we
have an encoder with ->hpd_pulse() for the pin, and then go
through all the pins and decided on the correct course of action
based on the earlier findings.
I have occasionally toyed with the idea of unifying the pre-DDI
HDMI and DP encoders into a single encoder as well. Besides the
hotplug processing it would have the other benefit of preventing
userspace from trying to enable both encoders at the same time.
That is simply illegal as they share the same clock/data pins.
We have some testcases that will attempt that and thus fail on
many older machines. But for now let's stick to fixing just the
hotplug code.
Cc: [email protected] # 4.19+
Cc: Lyude Paul <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Fixes: b6ca3eee18ba ("drm/i915: Nuke dev_priv->irq_port[]")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Lyude Paul <[email protected]>
(cherry picked from commit 5a3aeca97af1b6b3498d59a7fd4e8bb95814c108)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_hotplug.c | 66 ++++++++++++++++++++++++-----------
1 file changed, 47 insertions(+), 19 deletions(-)
--- a/drivers/gpu/drm/i915/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -397,37 +397,54 @@ void intel_hpd_irq_handler(struct drm_i9
struct intel_encoder *encoder;
bool storm_detected = false;
bool queue_dig = false, queue_hp = false;
+ u32 long_hpd_pulse_mask = 0;
+ u32 short_hpd_pulse_mask = 0;
+ enum hpd_pin pin;
if (!pin_mask)
return;
spin_lock(&dev_priv->irq_lock);
+
+ /*
+ * Determine whether ->hpd_pulse() exists for each pin, and
+ * whether we have a short or a long pulse. This is needed
+ * as each pin may have up to two encoders (HDMI and DP) and
+ * only the one of them (DP) will have ->hpd_pulse().
+ */
for_each_intel_encoder(&dev_priv->drm, encoder) {
- enum hpd_pin pin = encoder->hpd_pin;
bool has_hpd_pulse = intel_encoder_has_hpd_pulse(encoder);
+ enum port port = encoder->port;
+ bool long_hpd;
+ pin = encoder->hpd_pin;
if (!(BIT(pin) & pin_mask))
continue;
- if (has_hpd_pulse) {
- bool long_hpd = long_mask & BIT(pin);
- enum port port = encoder->port;
+ if (!has_hpd_pulse)
+ continue;
- DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", port_name(port),
- long_hpd ? "long" : "short");
- /*
- * For long HPD pulses we want to have the digital queue happen,
- * but we still want HPD storm detection to function.
- */
- queue_dig = true;
- if (long_hpd) {
- dev_priv->hotplug.long_port_mask |= (1 << port);
- } else {
- /* for short HPD just trigger the digital queue */
- dev_priv->hotplug.short_port_mask |= (1 << port);
- continue;
- }
+ long_hpd = long_mask & BIT(pin);
+
+ DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", port_name(port),
+ long_hpd ? "long" : "short");
+ queue_dig = true;
+
+ if (long_hpd) {
+ long_hpd_pulse_mask |= BIT(pin);
+ dev_priv->hotplug.long_port_mask |= BIT(port);
+ } else {
+ short_hpd_pulse_mask |= BIT(pin);
+ dev_priv->hotplug.short_port_mask |= BIT(port);
}
+ }
+
+ /* Now process each pin just once */
+ for_each_hpd_pin(pin) {
+ bool long_hpd;
+
+ if (!(BIT(pin) & pin_mask))
+ continue;
if (dev_priv->hotplug.stats[pin].state == HPD_DISABLED) {
/*
@@ -444,11 +461,22 @@ void intel_hpd_irq_handler(struct drm_i9
if (dev_priv->hotplug.stats[pin].state != HPD_ENABLED)
continue;
- if (!has_hpd_pulse) {
+ /*
+ * Delegate to ->hpd_pulse() if one of the encoders for this
+ * pin has it, otherwise let the hotplug_work deal with this
+ * pin directly.
+ */
+ if (((short_hpd_pulse_mask | long_hpd_pulse_mask) & BIT(pin))) {
+ long_hpd = long_hpd_pulse_mask & BIT(pin);
+ } else {
dev_priv->hotplug.event_bits |= BIT(pin);
+ long_hpd = true;
queue_hp = true;
}
+ if (!long_hpd)
+ continue;
+
if (intel_hpd_irq_storm_detect(dev_priv, pin)) {
dev_priv->hotplug.event_bits &= ~BIT(pin);
storm_detected = true;
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit df7342b240185d58d3d9665c0bbf0a0f5570ec29 upstream.
Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.
Reproducer:
# Hide a path to all users using a tmpfs
root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
root@castiana:~#
# As an unprivileged user, unshare user namespace and mount namespace
stgraber@castiana:~$ unshare -U -m -r
# Confirm the path is still not accessible
root@castiana:~# ls /sys/devices/
# Make /sys recursively unbindable and private
root@castiana:~# mount --make-runbindable /sys
root@castiana:~# mount --make-private /sys
# Recursively bind-mount the rest of /sys over to /mnnt
root@castiana:~# mount --rbind /sys/ /mnt
# Access our hidden /sys/device as an unprivileged user
root@castiana:~# ls /mnt/devices/
breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual
Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.
Cc: [email protected]
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namespace.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1734,8 +1734,14 @@ struct mount *copy_tree(struct mount *mn
for (s = r; s; s = next_mnt(s, r)) {
if (!(flag & CL_COPY_UNBINDABLE) &&
IS_MNT_UNBINDABLE(s)) {
- s = skip_mnt_tree(s);
- continue;
+ if (s->mnt.mnt_flags & MNT_LOCKED) {
+ /* Both unbindable and locked. */
+ q = ERR_PTR(-EPERM);
+ goto out;
+ } else {
+ s = skip_mnt_tree(s);
+ continue;
+ }
}
if (!(flag & CL_COPY_MNT_NS_FILE) &&
is_mnt_ns_file(s->mnt.mnt_root)) {
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <[email protected]>
commit c02ba4ef16eefe663fdefcccaa57fad32d5481bf upstream.
Since we need to be able to allow DPMS on->off prop changes after an MST
port has disappeared from the system, we need to be able to make sure we
can compute a config for the resulting atomic commit. Currently this is
impossible when the port has disappeared, since the VCPI slot searching
we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.
Since the only commits we want to allow on no-longer-present MST ports
are ones that shut off display hardware, we already know that no VCPI
allocations are needed. So, hardcode the VCPI slot count to 0 when
intel_dp_mst_compute_config() is called on an MST port that's gone.
Changes since V4:
- Don't use mst_port_gone at all, just check whether or not the drm
connector is registered - Daniel Vetter
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f67207d78ceaf98b7531bc22df6f21328559c8d4)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_dp_mst.c | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -38,11 +38,11 @@ static bool intel_dp_mst_compute_config(
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
struct intel_digital_port *intel_dig_port = intel_mst->primary;
struct intel_dp *intel_dp = &intel_dig_port->dp;
- struct intel_connector *connector =
- to_intel_connector(conn_state->connector);
+ struct drm_connector *connector = conn_state->connector;
+ void *port = to_intel_connector(connector)->port;
struct drm_atomic_state *state = pipe_config->base.state;
int bpp;
- int lane_count, slots;
+ int lane_count, slots = 0;
const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
int mst_pbn;
bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc,
@@ -70,17 +70,23 @@ static bool intel_dp_mst_compute_config(
pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
- if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, connector->port))
+ if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, port))
pipe_config->has_audio = true;
mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
pipe_config->pbn = mst_pbn;
- slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
- connector->port, mst_pbn);
- if (slots < 0) {
- DRM_DEBUG_KMS("failed finding vcpi slots:%d\n", slots);
- return false;
+ /* Zombie connectors can't have VCPI slots */
+ if (READ_ONCE(connector->registered)) {
+ slots = drm_dp_atomic_find_vcpi_slots(state,
+ &intel_dp->mst_mgr,
+ port,
+ mst_pbn);
+ if (slots < 0) {
+ DRM_DEBUG_KMS("failed finding vcpi slots:%d\n",
+ slots);
+ return false;
+ }
}
intel_link_compute_m_n(bpp, lane_count,
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manasi Navare <[email protected]>
commit e528c2affcf216b3d02b22004895cb678769629b upstream.
This patch fixes the macros used for defining the DFLEXDPMLE
register bit fields. This accounts for changes in the spec.
Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc: Animesh Manna <[email protected]>
Cc: Paulo Zanoni <[email protected]>
Cc: Jose Roberto de Souza <[email protected]>
Cc: <[email protected]> # v4.19+
Signed-off-by: Manasi Navare <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit b4335ec0a3ee6229a570755f8fb95dc8a7c694f2)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/i915_reg.h | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2097,8 +2097,12 @@ enum i915_power_well_id {
/* ICL PHY DFLEX registers */
#define PORT_TX_DFLEXDPMLE1 _MMIO(0x1638C0)
-#define DFLEXDPMLE1_DPMLETC_MASK(n) (0xf << (4 * (n)))
-#define DFLEXDPMLE1_DPMLETC(n, x) ((x) << (4 * (n)))
+#define DFLEXDPMLE1_DPMLETC_MASK(tc_port) (0xf << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML0(tc_port) (1 << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML1_0(tc_port) (3 << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML3(tc_port) (8 << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) (12 << (4 * (tc_port)))
+#define DFLEXDPMLE1_DPMLETC_ML3_0(tc_port) (15 << (4 * (tc_port)))
/* BXT PHY Ref registers */
#define _PORT_REF_DW3_A 0x16218C
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manasi Navare <[email protected]>
commit 041444458835d7fb2c9f042598bfe16bf375b15d upstream.
This patch fixes the original commit c0cfb10d9e1de49 ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.
v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally
Fixes: c0cfb10d9e1d ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Ville Syrjala <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: <[email protected]> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <[email protected]>
Tested-by: Alexander Wilson <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 1e712535c51ab025ebc776d4405683d81521996d)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_dp.c | 30 ++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_dp_link_training.c | 26 +++++++---------------
2 files changed, 39 insertions(+), 17 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -401,6 +401,22 @@ static bool intel_dp_link_params_valid(s
return true;
}
+static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp,
+ int link_rate,
+ uint8_t lane_count)
+{
+ const struct drm_display_mode *fixed_mode =
+ intel_dp->attached_connector->panel.fixed_mode;
+ int mode_rate, max_rate;
+
+ mode_rate = intel_dp_link_required(fixed_mode->clock, 18);
+ max_rate = intel_dp_max_data_rate(link_rate, lane_count);
+ if (mode_rate > max_rate)
+ return false;
+
+ return true;
+}
+
int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
int link_rate, uint8_t lane_count)
{
@@ -410,9 +426,23 @@ int intel_dp_get_link_train_fallback_val
intel_dp->num_common_rates,
link_rate);
if (index > 0) {
+ if (intel_dp_is_edp(intel_dp) &&
+ !intel_dp_can_link_train_fallback_for_edp(intel_dp,
+ intel_dp->common_rates[index - 1],
+ lane_count)) {
+ DRM_DEBUG_KMS("Retrying Link training for eDP with same parameters\n");
+ return 0;
+ }
intel_dp->max_link_rate = intel_dp->common_rates[index - 1];
intel_dp->max_link_lane_count = lane_count;
} else if (lane_count > 1) {
+ if (intel_dp_is_edp(intel_dp) &&
+ !intel_dp_can_link_train_fallback_for_edp(intel_dp,
+ intel_dp_max_common_rate(intel_dp),
+ lane_count >> 1)) {
+ DRM_DEBUG_KMS("Retrying Link training for eDP with same parameters\n");
+ return 0;
+ }
intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
intel_dp->max_link_lane_count = lane_count >> 1;
} else {
--- a/drivers/gpu/drm/i915/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
@@ -352,22 +352,14 @@ intel_dp_start_link_train(struct intel_d
return;
failure_handling:
- /* Dont fallback and prune modes if its eDP */
- if (!intel_dp_is_edp(intel_dp)) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
- intel_connector->base.base.id,
- intel_connector->base.name,
- intel_dp->link_rate, intel_dp->lane_count);
- if (!intel_dp_get_link_train_fallback_values(intel_dp,
- intel_dp->link_rate,
- intel_dp->lane_count))
- /* Schedule a Hotplug Uevent to userspace to start modeset */
- schedule_work(&intel_connector->modeset_retry_work);
- } else {
- DRM_ERROR("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
- intel_connector->base.base.id,
- intel_connector->base.name,
- intel_dp->link_rate, intel_dp->lane_count);
- }
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
+ intel_connector->base.base.id,
+ intel_connector->base.name,
+ intel_dp->link_rate, intel_dp->lane_count);
+ if (!intel_dp_get_link_train_fallback_values(intel_dp,
+ intel_dp->link_rate,
+ intel_dp->lane_count))
+ /* Schedule a Hotplug Uevent to userspace to start modeset */
+ schedule_work(&intel_connector->modeset_retry_work);
return;
}
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <[email protected]>
commit 9b27390139dbe0dc10d1899545248862fe826b61 upstream.
When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.
To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.
One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.
v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
Add Daniel's proposed comment to better document why we do this
Drop the redundant intel_set_plane_visible() call
Cc: [email protected] # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: [email protected]
Cc: Dennis <[email protected]>
Cc: Daniel Vetter <[email protected]>
Tested-by: Dennis <[email protected]>
Tested-by: Peter Nowee <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Daniel Vetter <[email protected]>
(cherry picked from commit 62358aa4ee86481ce044bef04859820e1bc7c1d9)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_display.c | 78 ++++++++++++++++++++---------------
1 file changed, 46 insertions(+), 32 deletions(-)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2754,20 +2754,33 @@ intel_set_plane_visible(struct intel_crt
plane_state->base.visible = visible;
- /* FIXME pre-g4x don't work like this */
- if (visible) {
+ if (visible)
crtc_state->base.plane_mask |= drm_plane_mask(&plane->base);
- crtc_state->active_planes |= BIT(plane->id);
- } else {
+ else
crtc_state->base.plane_mask &= ~drm_plane_mask(&plane->base);
- crtc_state->active_planes &= ~BIT(plane->id);
- }
DRM_DEBUG_KMS("%s active planes 0x%x\n",
crtc_state->base.crtc->name,
crtc_state->active_planes);
}
+static void fixup_active_planes(struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
+ struct drm_plane *plane;
+
+ /*
+ * Active_planes aliases if multiple "primary" or cursor planes
+ * have been used on the same (or wrong) pipe. plane_mask uses
+ * unique ids, hence we can use that to reconstruct active_planes.
+ */
+ crtc_state->active_planes = 0;
+
+ drm_for_each_plane_mask(plane, &dev_priv->drm,
+ crtc_state->base.plane_mask)
+ crtc_state->active_planes |= BIT(to_intel_plane(plane)->id);
+}
+
static void intel_plane_disable_noatomic(struct intel_crtc *crtc,
struct intel_plane *plane)
{
@@ -2777,6 +2790,7 @@ static void intel_plane_disable_noatomic
to_intel_plane_state(plane->base.state);
intel_set_plane_visible(crtc_state, plane_state, false);
+ fixup_active_planes(crtc_state);
if (plane->id == PLANE_PRIMARY)
intel_pre_disable_primary_noatomic(&crtc->base);
@@ -2795,7 +2809,6 @@ intel_find_initial_plane_obj(struct inte
struct drm_i915_gem_object *obj;
struct drm_plane *primary = intel_crtc->base.primary;
struct drm_plane_state *plane_state = primary->state;
- struct drm_crtc_state *crtc_state = intel_crtc->base.state;
struct intel_plane *intel_plane = to_intel_plane(primary);
struct intel_plane_state *intel_state =
to_intel_plane_state(plane_state);
@@ -2885,10 +2898,6 @@ valid_fb:
plane_state->fb = fb;
plane_state->crtc = &intel_crtc->base;
- intel_set_plane_visible(to_intel_crtc_state(crtc_state),
- to_intel_plane_state(plane_state),
- true);
-
atomic_or(to_intel_plane(primary)->frontbuffer_bit,
&obj->frontbuffer_bits);
}
@@ -15365,17 +15374,6 @@ void i830_disable_pipe(struct drm_i915_p
POSTING_READ(DPLL(pipe));
}
-static bool intel_plane_mapping_ok(struct intel_crtc *crtc,
- struct intel_plane *plane)
-{
- enum pipe pipe;
-
- if (!plane->get_hw_state(plane, &pipe))
- return true;
-
- return pipe == crtc->pipe;
-}
-
static void
intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv)
{
@@ -15387,13 +15385,20 @@ intel_sanitize_plane_mapping(struct drm_
for_each_intel_crtc(&dev_priv->drm, crtc) {
struct intel_plane *plane =
to_intel_plane(crtc->base.primary);
+ struct intel_crtc *plane_crtc;
+ enum pipe pipe;
+
+ if (!plane->get_hw_state(plane, &pipe))
+ continue;
- if (intel_plane_mapping_ok(crtc, plane))
+ if (pipe == crtc->pipe)
continue;
DRM_DEBUG_KMS("%s attached to the wrong pipe, disabling plane\n",
plane->base.name);
- intel_plane_disable_noatomic(crtc, plane);
+
+ plane_crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
+ intel_plane_disable_noatomic(plane_crtc, plane);
}
}
@@ -15565,23 +15570,32 @@ void i915_redisable_vga(struct drm_i915_
}
/* FIXME read out full plane state for all planes */
-static void readout_plane_state(struct intel_crtc *crtc)
+static void readout_plane_state(struct drm_i915_private *dev_priv)
{
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- struct intel_crtc_state *crtc_state =
- to_intel_crtc_state(crtc->base.state);
struct intel_plane *plane;
+ struct intel_crtc *crtc;
- for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
+ for_each_intel_plane(&dev_priv->drm, plane) {
struct intel_plane_state *plane_state =
to_intel_plane_state(plane->base.state);
- enum pipe pipe;
+ struct intel_crtc_state *crtc_state;
+ enum pipe pipe = PIPE_A;
bool visible;
visible = plane->get_hw_state(plane, &pipe);
+ crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
+ crtc_state = to_intel_crtc_state(crtc->base.state);
+
intel_set_plane_visible(crtc_state, plane_state, visible);
}
+
+ for_each_intel_crtc(&dev_priv->drm, crtc) {
+ struct intel_crtc_state *crtc_state =
+ to_intel_crtc_state(crtc->base.state);
+
+ fixup_active_planes(crtc_state);
+ }
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
@@ -15613,13 +15627,13 @@ static void intel_modeset_readout_hw_sta
if (crtc_state->base.active)
dev_priv->active_crtcs |= 1 << crtc->pipe;
- readout_plane_state(crtc);
-
DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
crtc->base.base.id, crtc->base.name,
enableddisabled(crtc_state->base.active));
}
+ readout_plane_state(dev_priv);
+
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <[email protected]>
commit 80c188695a77eddaa6e8885510ff4ef59fd478c3 upstream.
Currently we set intel_connector->mst_port to NULL to signify that the
MST port has been removed from the system so that we can prevent further
action on the port such as connector probes, mode probing, etc.
However, we're going to need access to intel_connector->mst_port in
order to fixup ->best_encoder() so that it can always return the correct
encoder for an MST port to prevent legacy DPMS prop changes from
failing. This should be safe, so instead keep intel_connector->mst_port
always set and instead just check the status of
drm_connector->regustered to signify whether or not the connector has
disappeared from the system.
Changes since v2:
- Add a comment to mst_port_gone (Jani Nikula)
- Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
Apparently bool is discouraged in structs these days
Changes since v4:
- Don't use mst_port_gone at all! Just check if the connector is
registered or not - Daniel Vetter
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 6ed5bb1fbad34382c8cfe9a9bf737e9a43053df5)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_dp_mst.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -311,9 +311,8 @@ static int intel_dp_mst_get_ddc_modes(st
struct edid *edid;
int ret;
- if (!intel_dp) {
+ if (!READ_ONCE(connector->registered))
return intel_connector_update_modes(connector, NULL);
- }
edid = drm_dp_mst_get_edid(connector, &intel_dp->mst_mgr, intel_connector->port);
ret = intel_connector_update_modes(connector, edid);
@@ -328,9 +327,10 @@ intel_dp_mst_detect(struct drm_connector
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_dp *intel_dp = intel_connector->mst_port;
- if (!intel_dp)
+ if (!READ_ONCE(connector->registered))
return connector_status_disconnected;
- return drm_dp_mst_detect_port(connector, &intel_dp->mst_mgr, intel_connector->port);
+ return drm_dp_mst_detect_port(connector, &intel_dp->mst_mgr,
+ intel_connector->port);
}
static void
@@ -370,7 +370,7 @@ intel_dp_mst_mode_valid(struct drm_conne
int bpp = 24; /* MST uses fixed bpp */
int max_rate, mode_rate, max_lanes, max_link_clock;
- if (!intel_dp)
+ if (!READ_ONCE(connector->registered))
return MODE_ERROR;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
@@ -402,7 +402,7 @@ static struct drm_encoder *intel_mst_ato
struct intel_dp *intel_dp = intel_connector->mst_port;
struct intel_crtc *crtc = to_intel_crtc(state->crtc);
- if (!intel_dp)
+ if (!READ_ONCE(connector->registered))
return NULL;
return &intel_dp->mst_encoders[crtc->pipe]->base.base;
}
@@ -503,7 +503,6 @@ static void intel_dp_register_mst_connec
static void intel_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
struct drm_connector *connector)
{
- struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_i915_private *dev_priv = to_i915(connector->dev);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, connector->name);
@@ -512,10 +511,6 @@ static void intel_dp_destroy_mst_connect
if (dev_priv->fbdev)
drm_fb_helper_remove_one_connector(&dev_priv->fbdev->helper,
connector);
- /* prevent race with the check in ->detect */
- drm_modeset_lock(&connector->dev->mode_config.connection_mutex, NULL);
- intel_connector->mst_port = NULL;
- drm_modeset_unlock(&connector->dev->mode_config.connection_mutex);
drm_connector_put(connector);
}
On 11/19/18 9:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.3 release.
> There are 205 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Nov 21 16:24:55 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.3-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
stable-rc/linux-4.19.y boot: 120 boots: 0 failed, 101 passed with 18 offline, 1 conflict (v4.19.2-206-g857962e4c7ee)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.2-206-g857962e4c7ee/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.2-206-g857962e4c7ee/
Tree: stable-rc
Branch: linux-4.19.y
Git Describe: v4.19.2-206-g857962e4c7ee
Git Commit: 857962e4c7ee68cec7bbf720850c80d2ec7e5777
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 66 unique boards, 23 SoC families, 15 builds out of 187
Offline Platforms:
arm:
omap2plus_defconfig:
am335x-boneblack: 1 offline lab
sunxi_defconfig:
sun5i-r8-chip: 1 offline lab
tegra_defconfig:
tegra124-jetson-tk1: 1 offline lab
bcm2835_defconfig:
bcm2835-rpi-b: 1 offline lab
exynos_defconfig:
exynos5800-peach-pi: 1 offline lab
sama5_defconfig:
at91-sama5d4_xplained: 1 offline lab
multi_v7_defconfig:
alpine-db: 1 offline lab
am335x-boneblack: 1 offline lab
at91-sama5d4_xplained: 1 offline lab
exynos5800-peach-pi: 1 offline lab
socfpga_cyclone5_de0_sockit: 1 offline lab
sun5i-r8-chip: 1 offline lab
tegra124-jetson-tk1: 1 offline lab
arm64:
defconfig:
apq8016-sbc: 1 offline lab
juno-r2: 1 offline lab
meson-gxl-s905d-p230: 1 offline lab
meson-gxl-s905x-p212: 1 offline lab
mt7622-rfb1: 1 offline lab
Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
arm64:
defconfig:
meson-gxbb-p200:
lab-baylibre: FAIL
lab-baylibre-seattle: PASS
---
For more info write to <[email protected]>
On 19 November 2018 9:55:07 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
>This is the start of the stable review cycle for the 4.19.3 release.
>There are 205 patches in this series, all will be posted as a response
>to this one. If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Wed Nov 21 16:24:55 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.3-rc1.gz
>or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-4.19.y
>and the diffstat can be found below.
>
>thanks,
>
>greg k-h
>
Compiled and booted on the Lenovo IdeaPad 330-15ARR, no dmesg regressions.
--
Harsh Shandilya
PRJKT Development LLC
On Tue, Nov 20, 2018 at 12:44:31PM +0530, Harsh Shandilya wrote:
> On 19 November 2018 9:55:07 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
> >This is the start of the stable review cycle for the 4.19.3 release.
> >There are 205 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Wed Nov 21 16:24:55 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.3-rc1.gz
> >or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-4.19.y
> >and the diffstat can be found below.
> >
> >thanks,
> >
> >greg k-h
> >
> Compiled and booted on the Lenovo IdeaPad 330-15ARR, no dmesg regressions.
Great! thanks for testing and letting me know.
greg k-h
On Mon, 19 Nov 2018 at 22:01, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.19.3 release.
> There are 205 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Nov 21 16:24:55 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.3-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.19.3-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 857962e4c7ee68cec7bbf720850c80d2ec7e5777
git describe: v4.19.2-206-g857962e4c7ee
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.2-206-g857962e4c7ee
No regressions (compared to build v4.19.2)
No fixes (compared to build v4.19.2)
Ran 19858 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On Tue, Nov 20, 2018 at 01:35:39PM +0530, Naresh Kamboju wrote:
> On Mon, 19 Nov 2018 at 22:01, Greg Kroah-Hartman
> <[email protected]> wrote:
> >
> > This is the start of the stable review cycle for the 4.19.3 release.
> > There are 205 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed Nov 21 16:24:55 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.3-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
Wonderful, thanks for testing all of these and letting me know.
greg k-h
On Mon, Nov 19, 2018 at 05:25:07PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.3 release.
> There are 205 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Nov 21 16:24:55 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 135 pass: 135 fail: 0
Qemu test results:
total: 291 pass: 291 fail: 0
Details are available at https://kerneltests.org/builders/.
Guenter
On Tue, Nov 20, 2018 at 12:40:48PM -0800, Guenter Roeck wrote:
> On Mon, Nov 19, 2018 at 05:25:07PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.3 release.
> > There are 205 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed Nov 21 16:24:55 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 135 pass: 135 fail: 0
> Qemu test results:
> total: 291 pass: 291 fail: 0
>
> Details are available at https://kerneltests.org/builders/.
Thanks for testing all of these and letting me know.
I'll look into the 3.18.y regressions before doing a release there...
greg k-h