From: Xiaoke Wang <[email protected]>

[ Upstream commit 5a5aa9cce621e2c0e25a1e5d72d6be1749167cc0 ]

In rtw_init_drv_sw(), there are various init functions are called to
populate the padapter structure and some checks for their return value.
However, except for the first one error path, the other five error paths
do not properly release the previous allocated resources, which leads to
various memory leaks.

This patch fixes them and keeps the success and error separate.
Note that these changes keep the form of `rtw_init_drv_sw()` in
"drivers/staging/r8188eu/os_dep/os_intfs.c". As there is no proper device
to test with, no runtime testing was performed.

Signed-off-by: Xiaoke Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8723bs/os_dep/os_intfs.c | 60 +++++++++++----------
1 file changed, 31 insertions(+), 29 deletions(-)

diff --git a/drivers/staging/rtl8723bs/os_dep/os_intfs.c b/drivers/staging/rtl8723bs/os_dep/os_intfs.c
index 380d8c9e1239..68bba3c0e757 100644
--- a/drivers/staging/rtl8723bs/os_dep/os_intfs.c
+++ b/drivers/staging/rtl8723bs/os_dep/os_intfs.c
@@ -664,51 +664,36 @@ void rtw_reset_drv_sw(struct adapter *padapter)

u8 rtw_init_drv_sw(struct adapter *padapter)
{
- u8 ret8 = _SUCCESS;
-
rtw_init_default_value(padapter);

rtw_init_hal_com_default_value(padapter);

- if (rtw_init_cmd_priv(&padapter->cmdpriv)) {
- ret8 = _FAIL;
- goto exit;
- }
+ if (rtw_init_cmd_priv(&padapter->cmdpriv))
+ return _FAIL;

padapter->cmdpriv.padapter = padapter;

- if (rtw_init_evt_priv(&padapter->evtpriv)) {
- ret8 = _FAIL;
- goto exit;
- }
+ if (rtw_init_evt_priv(&padapter->evtpriv))
+ goto free_cmd_priv;

-
- if (rtw_init_mlme_priv(padapter) == _FAIL) {
- ret8 = _FAIL;
- goto exit;
- }
+ if (rtw_init_mlme_priv(padapter) == _FAIL)
+ goto free_evt_priv;

init_mlme_ext_priv(padapter);

- if (_rtw_init_xmit_priv(&padapter->xmitpriv, padapter) == _FAIL) {
- ret8 = _FAIL;
- goto exit;
- }
+ if (_rtw_init_xmit_priv(&padapter->xmitpriv, padapter) == _FAIL)
+ goto free_mlme_ext;

- if (_rtw_init_recv_priv(&padapter->recvpriv, padapter) == _FAIL) {
- ret8 = _FAIL;
- goto exit;
- }
+ if (_rtw_init_recv_priv(&padapter->recvpriv, padapter) == _FAIL)
+ goto free_xmit_priv;
/* add for CONFIG_IEEE80211W, none 11w also can use */
spin_lock_init(&padapter->security_key_mutex);

/* We don't need to memset padapter->XXX to zero, because adapter is allocated by vzalloc(). */
/* memset((unsigned char *)&padapter->securitypriv, 0, sizeof (struct security_priv)); */

- if (_rtw_init_sta_priv(&padapter->stapriv) == _FAIL) {
- ret8 = _FAIL;
- goto exit;
- }
+ if (_rtw_init_sta_priv(&padapter->stapriv) == _FAIL)
+ goto free_recv_priv;

padapter->stapriv.padapter = padapter;
padapter->setband = GHZ24_50;
@@ -719,9 +704,26 @@ u8 rtw_init_drv_sw(struct adapter *padapter)

rtw_hal_dm_init(padapter);

-exit:
+ return _SUCCESS;
+
+free_recv_priv:
+ _rtw_free_recv_priv(&padapter->recvpriv);
+
+free_xmit_priv:
+ _rtw_free_xmit_priv(&padapter->xmitpriv);
+
+free_mlme_ext:
+ free_mlme_ext_priv(&padapter->mlmeextpriv);

- return ret8;
+ rtw_free_mlme_priv(&padapter->mlmepriv);
+
+free_evt_priv:
+ rtw_free_evt_priv(&padapter->evtpriv);
+
+free_cmd_priv:
+ rtw_free_cmd_priv(&padapter->cmdpriv);
+
+ return _FAIL;
}

void rtw_cancel_all_timer(struct adapter *padapter)
--
2.35.1

2022-10-22 11:40:19

On 22/10/2022 08:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.17 release.
> There are 717 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Note, this will be the LAST 5.19.y kernel to be released. Please move
> to the 6.0.y kernel branch at this point in time, as after this is
> released, this branch will be end-of-life.
>
> Responses should be made by Mon, 24 Oct 2022 07:19:57 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.17-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

No new regressions for Tegra ...

Test results for stable-v5.19:
11 builds: 11 pass, 0 fail
28 boots: 28 pass, 0 fail
130 tests: 129 pass, 1 fail

Linux version: 5.19.17-g2b525314c7b5
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04

Test failures: tegra210-p3450-0000: devices

Tested-by: Jon Hunter <[email protected]>

Jon
--
nvpublic

2022-10-24 21:11:06

by Florian Fainelli

[permalink] [raw]

Subject: Re: [PATCH 5.19 000/717] 5.19.17-rc1 review

On 10/22/22 00:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.17 release.
> There are 717 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Note, this will be the LAST 5.19.y kernel to be released. Please move
> to the 6.0.y kernel branch at this point in time, as after this is
> released, this branch will be end-of-life.
>
> Responses should be made by Mon, 24 Oct 2022 07:19:57 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.17-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on
BMIPS_GENERIC:

Tested-by: Florian Fainelli <[email protected]>
--
Florian