ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm3/
(temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.13-mm3.gz)
- perfctr was dropped. Mikael has ceased development and recommends that
the focus be upon perfmon. See
http://sourceforge.net/mailarchive/forum.php?thread_id=8102899&forum_id=2237
- There are several performance tuning patches here which need careful
attention and testing. (Does anyone do performance testing any more?)
- An update to the anticipatory scheduler to fix a performance problem
where processes do a single read then exit, in the presence of competing
I/O acticity.
- The size of the page allocator per-cpu magazines has been increased
- The page allocator has been changed to use higher-order allocations
when batch-loading the per-cpu magazines. This is intended to give
improved cache colouring effects however it might have the downside of
causing extra page allocator fragmentation.
- The page allocator's per-cpu magazines have had their lower threshold
set to zero. And we can't remember why it ever had a lower threshold.
- Dropped all the virtualisation preparatory patches. Will later pick these
up from a git tree which chrisw is running.
- There are still quite a few patches here for 2.6.14 (30-50, perhaps).
Changes since 2.6.13-mm2:
linus.patch
git-cifs.patch
git-drm.patch
git-ia64.patch
git-ia64-fixup.patch
git-audit.patch
git-libata-all.patch
git-mtd.patch
git-netdev-all.patch
git-nfs.patch
git-nfs-oops-fix.patch
git-ocfs2-prep.patch
git-ocfs2.patch
git-scsi-misc.patch
git-scsi-rc-fixes.patch
Subsystem trees
-ip_conntrack_netbios_ns-build-fix.patch
-clear-task_struct-fs_excl-on-fork.patch
-i386-config_acpi_srat-typo-fix.patch
-ppc64-fix-oops-for-config_numa.patch
-ppc32-fix-kconfig-mismerge.patch
-agp-AGP-01-printk-levels.patch
-gregkh-driver-sysfs-write-ENOBUFS.patch
-gregkh-i2c-w1-fs9490-sync.patch
-gregkh-i2c-w1-01-hotplug.patch
-gregkh-i2c-w1-02-64bit.patch
-gregkh-i2c-w1-03.patch
-gregkh-i2c-w1-04.patch
-gregkh-i2c-w1-05.patch
-gregkh-i2c-w1-06.patch
-gregkh-i2c-w1-07.patch
-gregkh-i2c-w1-08.patch
-gregkh-i2c-w1-09.patch
-gregkh-i2c-w1-10-crc16.patch
-gregkh-i2c-w1-11.patch
-gregkh-i2c-w1-12.patch
-ignore-all-debugging-info-sections-in-scripts-reference_discardedpl.patch
-fix-split-include-dependency.patch
-txx9-serial-update.patch
-gregkh-pci-pci-rpaphp-01.patch
-gregkh-pci-pci-rpaphp-02.patch
-gregkh-pci-pci-rpaphp-03.patch
-gregkh-pci-pci-rpaphp-04.patch
-gregkh-pci-pci-rpaphp-05.patch
-gregkh-pci-pci-rpaphp-06.patch
-gregkh-pci-pci-driver-init-on-node.patch
-gregkh-pci-pci-move-pci-fixup-data-into-r-o-section.patch
-gregkh-pci-pci-remove-pretty-names.patch
-gregkh-pci-pci-remove-pretty-names-02.patch
-gregkh-pci-pci-cleanup-pci.h.patch
-gregkh-pci-pci-io_remap_pfn_range.patch
-gregkh-pci-pci-hotplug-use-bus_slot-number-for-name.patch
-gregkh-pci-pci-restore-bar-values.patch
-gregkh-pci-pci-make-sparc64-use-setup-res.patch
-gregkh-pci-pci-cleanup-return-values.patch
-gregkh-pci-pci-cleanup-return-values-fix.patch
-gregkh-pci-pci-remove-pci_find_device-from-parport_pc.patch
-gregkh-pci-pci-sgi-hotplug-fixes.patch
-gregkh-pci-pci-pci_intx.patch
-gregkh-pci-pci-pm-support-pm-cap-version-3.patch
-gregkh-pci-pci-pci_walk_bus.patch
-gregkh-pci-pci-fix-hotplug-vars.patch
-gregkh-pci-pci-must_check-attributes.patch
-pci-unhide-smbus-on-compaq-evo-n620c.patch
-git-scsi-iscsi-vs-git-net.patch
-git-net-vs-iscsi-fix.patch
-gregkh-usb-usb-cypress_m8-whitespace-fixes.patch
-gregkh-usb-usb-add-apple-touchpad-driver.patch
-gregkh-usb-usb-option-card-driver-coding-style-tweaks.patch
-gregkh-usb-usb-usbserial-remove-unneeded-casts.patch
-gregkh-usb-usb-gadget-centrialize-numbers.patch
-gregkh-usb-usb-keyspan_remote-endian-fix.patch
-gregkh-usb-usb-pl2303hx-fix.patch
-gregkh-usb-usb-ftdi_sio-userspecified-vid.patch
-gregkh-usb-usb-ftdi_sio-new-ids.patch
-gregkh-usb-usb-hid-blacklist-apple-bluetooth.patch
-gregkh-usb-usb-real-nodes-instead-of-usbfs.patch
-gregkh-usb-usb-real-nodes-instead-of-usbfs-fix.patch
-gregkh-usb-usb-storage-unusual-devs-mitsumi.patch
-gregkh-usb-usb-ub-01.patch
-gregkh-usb-usb-ub-02.patch
-gregkh-usb-usb-ub-03.patch
-gregkh-usb-usb-ub-04.patch
-gregkh-usb-usb-usblp-rate-limit-error-messages.patch
-gregkh-usb-usb-usbnet-gfp_flags-fix.patch
-gregkh-usb-usb-isp116x-hcd-01.patch
-gregkh-usb-usb-isp116x-hcd-02.patch
-gregkh-usb-usb-isp116x-hcd-03.patch
-gregkh-usb-usb-isp116x-hcd-04.patch
-gregkh-usb-usb-isp116x-hcd-05.patch
-gregkh-usb-usb-isp116x-hcd-06.patch
-gregkh-usb-usb-storage-01.patch
-gregkh-usb-usb-storage-02.patch
-gregkh-usb-usb-storage-03.patch
-gregkh-usb-usb-storage-04.patch
-gregkh-usb-usb-storage-05.patch
-gregkh-usb-usb-remove-URB_ASYNC_UNLINK.patch
-gregkh-usb-usb-serial-async-fixup.patch
-gregkh-usb-usb-fix-hp8200.patch
-gregkh-usb-usb-hub-code-motion.patch
-gregkh-usb-usb-hub-disconnect-children.patch
-gregkh-usb-usb-s3c24xx-port-numbering-fix.patch
-gregkh-usb-usb-ohci-ppc-soc-fix.patch
-gregkh-usb-usb-usb_lock_device_for_reset-timeout.patch
-gregkh-usb-usb-unbind-usb_generic-driver.patch
-gregkh-usb-usb-tweak-highspeed-calculations.patch
-gregkh-usb-usb-remove-annoying-message.patch
-gregkh-usb-usb-ohci-ppc-soc-include.patch
-gregkh-usb-usb-schedule-oss-usb-drivers-removal.patch
-gregkh-usb-usb-ldusb-64-bit-warnings.patch
-gregkh-usb-usb-usbnet-01.patch
-gregkh-usb-usb-usbnet-02.patch
-gregkh-usb-usb-usbnet-03.patch
-gregkh-usb-usb-usbnet-04.patch
-gregkh-usb-usb-usbnet-05.patch
-gregkh-usb-usb-usbnet-06.patch
-gregkh-usb-usb-usbnet-07.patch
-gregkh-usb-usb-usbnet-08.patch
-gregkh-usb-usb-usbnet-09.patch
-gregkh-usb-usb-ehci-01.patch
-gregkh-usb-usb-ehci-02.patch
-gregkh-usb-usb-usbmon-dma-areas.patch
-gregkh-usb-usb-yealink.patch
-gregkh-usb-usb-yealink-update.patch
-gregkh-usb-usb-storage-onetouch-cleanups.patch
-security-enable-atomic-inode-security-labeling.patch
-security-enable-atomic-inode-security-labeling-use-kstrdup.patch
-ext2-enable-atomic-inode-security-labeling.patch
-ext2-enable-atomic-inode-security-labeling-fix.patch
-ext3-enable-atomic-inode-security-labeling.patch
-ext3-enable-atomic-inode-security-labeling-fix.patch
-tmpfs-enable-atomic-inode-security.patch
-tmpfs-enable-atomic-inode-security-fix.patch
-remove-security_inode_post_create-mkdir-symlink-mknod.patch
-remove-the-inode_post_link-and-inode_post_rename-lsm-hooks.patch
-ppc32-make-perfmono-config_e500-specific.patch
-mips-add-tanbac-tb0287-support.patch
-i386-seccomp-fix-for-auditing-ptrace.patch
-x86_64dont-do-broadcast-ipis-when-hotplug-is-enabled-in-flat-mode.patch
-x86_64-dont-call-enforce_max_cpus-when-hotplug-is-enabled-2.patch
-alpha-process_reloc_for_got-confuses-r_offset-and-r_addend.patch
-scan-all-enabled-ports-on-ata_piix.patch
-pty_chars_in_buffer-oops-fix.patch
-convert-proc-devices-to-use-seq_file-interface.patch
-convert-proc-devices-to-use-seq_file-interface-tidy.patch
-ibm-hdaps-accelerometer-driver-with-probing.patch
-vga-text-console-and-stty-cols-rows.patch
-vga-text-console-and-stty-cols-rows-tidy.patch
-autofs-fix-busy-inodes-after-umount.patch
-fix-disassociate_ctty-vs-fork-race.patch
-prefetch-kernel-stacks-to-speed-up-context-switch.patch
-bfs-fix-endianness-signedness-add-trivial-bugfix.patch
-cs89x0-add-netpoll-support.patch
-change-io_cancel-return-code-for-no-cancel-case.patch
-kiocb-locking-to-serialise-retry-and-cancel-2.patch
-subcpusets-fix-for-cpusets-minor-problem.patch
-remove-unnecessary-handle_irq_event-prototypes.patch
-deadline-cleanup-question-mark-operator.patch
-synclinkc-compiler-optimisation-fix.patch
-synclinkc-add-clear-stats.patch
-synclinkc-add-loopback-to-async-mode.patch
-synclinkmpc-fix-double-mapping-of-signals.patch
-synclinkmpc-disable-burst-transfers.patch
-synclinkmpc-add-statistics-clear.patch
-synclinkmpc-fix-async-internal-loopback.patch
-fix-reboot-via-keyboard-controller-reset.patch
-dvb-email-address-update.patch
-dvb-remove-versionh-dependencies.patch
-dvb-avoid-building-empty-built-ino.patch
-dvb-core-glue-code-for-dmx_get_caps-and-dmx_set_source.patch
-dvb-core-dvb_demux-fix-continuity-counter-error-handling.patch
-dvb-core-dvb_demux-remove-unused-cruft.patch
-dvb-core-dvb_demux-remove-unsused-descramble-callbacks.patch
-dvb-core-dvb_demux-remove-more-unused-cruft.patch
-dvb-core-dvb_demux-use-init_list_head.patch
-dvb-core-dvb_demux-formatting-fixes.patch
-dvb-core-ci-timeout-fix.patch
-dvb-frontend-mt352-fix-signal-strength-reading.patch
-dvb-frontend-stv0299-pass-i2c-bus-to-pll-callback.patch
-dvb-frontend-s5h1420-fixes.patch
-dvb-frontend-stv0299-support-reading-both-ber-and-ucblocks.patch
-dvb-frontend-tda1004x-fix-snr-reading.patch
-dvb-frontend-ves1820-improve-tuning.patch
-dvb-frontend-cx24110-diseqc-fix.patch
-dvb-frontend-cx24110-another-diseqc-fix.patch
-dvb-frontend-cx24110-clean-up-timeout-handling.patch
-dvb-frontend-stv0297-qam128-tuning-improvement.patch
-dvb-frontend-or51132-remove-bogus-optimization-attempt.patch
-dvb-usb-add-twinhandtv-starbox-support.patch
-dvb-usb-dibusb-kworld-xpert-dvb-t-usb20-support.patch
-dvb-usb-removed-empty-module_init-exit-calls.patch
-dvb-usb-dtt200u-copy-frontend_ops-before-modifying.patch
-dvb-usb-dtt200u-add-proper-device-names.patch
-dvb-usb-core-change-dvb_usb_device_init-api.patch
-dvb-usb-digitv-support-for-nxt6000-demod.patch
-dvb-usb-white-space-cleanup.patch
-dvb-usb-cxusb-fixes-for-new-firmware.patch
-dvb-remove-noisy-debug-print.patch
-dvb-bt8xx-endianness-fix.patch
-dvb-bt8xx-cleanup.patch
-dvb-bt8xx-nebula-digitv-mt352-support.patch
-dvb-nebula-digitv-nxt6000-fix.patch
-dvb-dst-fix-symbol-rate-setting.patch
-dvb-dst-remove-unnecessary-code.patch
-dvb-dst-dprrintk-cleanup.patch
-dvb-dst-dprrintk-cleanup-gcc-29x-fix.patch
-dvb-dst-dprrintk-cleanup-gcc-295-fix.patch
-dvb-dst-identify-boards.patch
-dvb-dst-fix-dvb-c-tuning.patch
-dvb-dst-ci-doc-update.patch
-dvb-dst-updated-documentation.patch
-dvb-cinergyt2-remote-control-fixes.patch
-dvb-av7110-siemens-dvb-c-analog-video-input-support.patch
-dvb-budget-ci-add-support-for-tt-dvb-c-ci-card.patch
-dvb-budget-av-fixes-for-ci-interface.patch
-dvb-budget-av-enable-frontend-on-knc1-plus-cards.patch
-dvb-av7110-disable-superflous-firmware-handshake.patch
-dvb-av7110-conditionally-disable-workaround-for-broken-firmware.patch
-dvb-ttpci-av7110-rc5-remote-control-support.patch
-dvb-ttpci-add-pci-ids-for-old-siemens-tt-dvb-c-card.patch
-dvb-saa7146-i2c-vs-sysfs-fix.patch
-dvb-ttusb-budget-use-time_after_eq.patch
-pcmcia-reduce-dsc-stack-footprint.patch
-yenta-share-code-with-pci-core.patch
-pcmcia-cs-fix-possible-missed-wakeup.patch
-fix-pcmcia_request_irq-for-multifunction-card.patch
-pcmcia-yenta-avoid-pci-write-posting-problem.patch
-pcmcia-remove-unused-client_t.patch
-pcmcia-remove-unused-vpp1-vpp2-and-vcc.patch
-pcmcia-omap-cf-controller.patch
-pcmcia-more-ids-for-ide_cs.patch
-pcmcia-add-pcmcia-to-irq-information.patch
-spinlock-consolidation.patch
-mips-build-fix-for-spinlock-consolidation.patch
-spinlock-consolidation-ia64-fix.patch
-spinlock-consolidation-sparc64-fix.patch
-numa-aware-slab-allocator-v5.patch
-sched-run-sched_normal-tasks-with-real-time-tasks-on-smt-siblings.patch
-sched-idlest-cpus_allowed-aware.patch
-sched-cleanups.patch
-sched-task_noninteractive.patch
-sched-fix-smt-scheduler-latency-bug.patch
-sched-less-newidle-locking.patch
-sched-less-locking.patch
-sched-ht-optimisation.patch
-sched-use-cached-variable-in-sys_sched_yield.patch
-sched-dont-kick-alb-in-the-presence-of-pinned-task.patch
-sched-allow-the-load-to-grow-upto-its-cpu_power.patch
-video_bt848-remove-not-required-part-of-the-help-text.patch
-v4l-common-part-updates-and-tuner-additions.patch
-v4l-common-part-updates-and-tuner-additions-gcc-29x-fix.patch
-v4l-bttv-updates-and-card-additions.patch
-v4l-bttv-updates-and-card-additions-fix.patch
-v4l-cx88-updates-and-card-additions.patch
-v4l-cx88-updates-and-card-additions-gcc-295-fix.patch
-v4l-saa7134-updates-and-board-additions.patch
-v4l-changes-the-prefix-of-msp34xx-and-error-while.patch
-v4l-syncs-tveeprom-tuners-list-with-the-list-from.patch
-v4l-correct-lg-ntsc-taln-mini-tuner-takeover.patch
-v4l-add-saa713x-card-65-kworld-v-stream-studio-tv-terminator.patch
-v4l-add-saa713x-card-66-yuan-tun-900-saa7135.patch
-v4l-cx88-dvb-incorrectly-reporting-fixed-and.patch
-v4l-normalize-whitespace-and-comments-in-tuner.patch
-v4l-change-lg-tdvs-h062f-from-ntsc-to-atsc.patch
-v4l-some-error-treatment-implemented-at-resume.patch
-v4l-the-microtune-4049fm5-uses-an-if-frequency-of.patch
-v4l-include-linux-configh-no-longer-needed.patch
-v4l-correct-the-amux-for-composite-and-s-video.patch
-v4l-print-warning-if-pal=-or-secam=-argument-is.patch
-v4l-added-some-missing-parameter-descriptions-at.patch
-v4l-makes-the-input-event-device-for-ir-matchable.patch
-v4l-include-saa6588-compiler-option-and-files.patch
-v4l-removed-kernel-version-dependency-from.patch
-v4l-tvaudio-cleanup-and-better-degug-messages.patch
-v4l-tvaudio-cleanup-and-better-degug-messages-gcc-29c-fix.patch
-v4l-tveeprom-improved-to-support-newer-hauppage-cards.patch
-v4l-tveeprom-improved-to-support-newer-hauppage-cards-gcc-29x-fix.patch
-files-fix-rcu-initializers.patch
-files-rcuref-apis.patch
-files-break-up-files-struct.patch
-files-sparc64-fix-2.patch
-files-files-struct-with-rcu.patch
-files-lock-free-fd-look-up.patch
-files-files-locking-doc.patch
-v9fs-documentation-makefiles-configuration.patch
-v9fs-documentation-makefiles-configuration-add-fd-based-transport-to-makefile-docs.patch
-v9fs-documentation-makefiles-configuration-fix-plan9port-example-in-v9fs.patch
-v9fs-vfs-file-dentry-and-directory-operations.patch
-v9fs-vfs-inode-operations.patch
-v9fs-vfs-inode-operations-adjust-follow_link-and-put_link-to.patch
-v9fs-vfs-superblock-operations-and-glue.patch
-v9fs-vfs-superblock-operations-and-glue-add-fd-based-transport-to-mount-options.patch
-v9fs-9p-protocol-implementation.patch
-v9fs-9p-protocol-implementation-use-standard-kernel-byteswapping.patch
-v9fs-9p-protocol-implementation-remove-sparse-bitwise-warnings.patch
-v9fs-transport-modules.patch
-v9fs-transport-modules-add-fd-based-transport-module.patch
-v9fs-transport-modules-fix-a-problem-with-named-pipe-transport.patch
-v9fs-transport-modules-cleanup-fd-transport.patch
-v9fs-support-to-force-umount.patch
-v9fs-debug-and-support-routines.patch
-v9fs-change-error-magic-numbers-to-defined-constants.patch
-v9fs-clean-up-vfs_inode-and-setattr-functions.patch
-v9fs-fix-support-for-special-files-devices-named-pipes-etc.patch
-v9fs-readlink-extended-mode-check.patch
-v9fs-fix-handling-of-malformed-9p-messages.patch
-fbdev-add-fbset-a-support.patch
-vesafb-add-blanking-support.patch
-fbdev-prevent-drivers-that-have-hardware-cursors-from-calling-software-cursor-code.patch
-fbdev-geode-updates.patch
-fbdev-geode-updates-fix.patch
-fbdev-resurrect-hooks-to-get-edid-from-firmware.patch
-fbdev-resurrect-hooks-to-get-edid-from-firmware-fix.patch
-savagefb-driver-updates.patch
-nvidiafb-fallback-to-firmware-edid.patch
-fbdev-fix-greater-than-1-bit-monochrome-color-handling.patch
-fbcon-saner-16-color-to-4-color-conversion.patch
-console-fix-buffer-copy-on-vc-resize.patch
-atyfb-remove-code-that-sets-sync-polarity-unconditionally.patch
-radeonfb_old-fix-broken-link.patch
-matroxfb-read-mga-pins-data-on-powerpc.patch
-sisfb-update.patch
-sisfb-update-resurrect-makefile.patch
-sisfb-update-makefile.patch
-better-error-handing-in-savagefb_probe.patch
-framebuffer-new-driver-for-cyberblade-i1-graphics.patch
-framebuffer-bit_putcs-optimization-for-8x.patch
-radeonfb-only-request-resources-we-need.patch
-fbdev-add-vesa-coordinated-video-timings-cvt-support.patch
-nvidiafb-use-cvt-to-get-mode-for-digital-displays.patch
-savagefb-make-mode_option-available-when-compiled-as.patch
-fbcon-stop-cursor-timer-if-console-is-inactive.patch
-nvidiafb-fixed-mirrored-characters-in-big-endian-machines.patch
-fbdev-initialize-var-structure-in-calc_mode_timings.patch
-pxafb-add-hsync-time-reporting-hook.patch
-fbcon-break-up-bit_putcs-into-its-component-functions.patch
-fbcon-break-up-bit_putcs-into-its-component-functions-fix.patch
-i810fb-add-i2c-ddc-support.patch
-i810fb-add-i2c-ddc-support-fix.patch
-i810fb-add-i2c-ddc-support-fix-fix.patch
-i810fb-add-i2c-ddc-support-Makefile-fix.patch
-i810fb-stop-lcd-displays-from-flickering.patch
-quiet-non-x86-option-rom-warnings.patch
-s3c2410fb-arm-s3c2410-framebuffer-driver.patch
-s3c2410fb-platform-support-for-arm-s3c2410-framebuffer.patch
-md-fix-minor-error-in-raid10-read-balancing-calculation.patch
-md-fail-io-request-to-md-that-require-a-barrier.patch
-# wait:
-md-fix-rh_dec-rh_inc-race-in-dm-raid1c.patch
-md-dont-allow-new-md-bitmap-file-to-be-set-if-one-already-exists.patch
-md-improve-handling-of-bitmap-initialisation.patch
-md-all-hot-add-and-hot-remove-of-md-intent-logging-bitmaps.patch
-md-support-write-mostly-device-in-raid1.patch
-md-add-write-behind-support-for-md-raid1.patch
-md-support-md-linear-array-with-components-greater-than-2-terabytes.patch
-md-raid1_quiesce-is-back-to-front-fix-it.patch
-md-make-sure-bitmap_daemon_work-actually-does-work.patch
-md-do-not-set-mddev-bitmap-until-bitmap-is-fully-initialised.patch
-md-allow-hot-adding-devices-to-arrays-with-non-persistant-superblocks.patch
-md-allow-md-to-load-a-superblock-with-feature-bit-1-set.patch
-md-fix-bitmap-read_sb_page-so-that-it-handles-errors-properly.patch
-md-remove-old-cruft-from-md_kh-header-file.patch
-md-limit-size-of-sb-read-written-to-appropriate-amount.patch
-md-add-write-intent-bitmap-support-to-raid5.patch
-md-write-intent-bitmap-support-for-raid6.patch
-md-use-kthread-infrastructure-in-md.patch
-md-ensure-bitmap_writeback_daemon-handles-shutdown-properly.patch
-md-tidy-up-daemon-stop-start-code-in-md-bitmapc.patch
-drivers-md-raid1c-make-a-function-static.patch
-md-choose-better-default-offset-for-bitmap.patch
-md-use-queue_hardsect_size-instead-of-block_size-for-md-superblock-size-calc.patch
-md-add-information-about-superblock-version-to-proc-mdstat.patch
-md-report-spare-drives-in-proc-mdstat.patch
-md-make-sure-the-new-sb_size-is-set-properly-device-added-without-pre-existing-superblock.patch
-md-really-get-sb_size-setting-right-in-all-cases.patch
-md-fix-raid10-assembly-when-too-many-devices-are-missing.patch
-md-fix-bug-when-raid10-rebuilds-without-enough-drives.patch
-update-documentation-docbook-kernel-hackingtmpl.patch
-documentation-how-to-apply-patches-for-various-trees.patch
-documentation-how-to-apply-patches-for-various-tree-fix.patch
-isa-dma-api-documentation.patch
-docs-fix-misinformation-about.patch
-update-kfree-vfree-and-vunmap-kerneldoc.patch
-docbook-fix-kernel-api-documentation-generation.patch
-kdump-documentation-update.patch
-vfs-update-documentation.patch
-documentation-sparse-snapshot-url.patch
-fuse-maintainers-kconfig-and-makefile-changes.patch
-fuse-core.patch
-fuse-device-functions.patch
-fuse-device-functions-document-mount-options.patch
-fuse-device-functions-document-mount-options-documentation-update.patch
-fuse-device-functions-request-counter-overflow-fix.patch
-fuse-device-functions-module-alias.patch
-fuse-read-only-operations.patch
-fuse-read-only-operations-follow_link-fix.patch
-fuse-read-write-operations.patch
-fuse-file-operations.patch
-fuse-mount-options.patch
-fuse-extended-attribute-operations.patch
-fuse-add-padding.patch
-fuse-readpages-operation.patch
-fuse-tighten-check-for-processes-allowed-access.patch
-fuse-stricter-mount-option-checking.patch
-fuse-direct-i-o.patch
-fuse-direct-i-o-cleanup.patch
-fuse-transfer-readdir-data-through-device.patch
-fuse-more-flexible-caching.patch
-fuse-dont-update-file-times.patch
-fuse-add-fsync-operation-for-directories.patch
-fuse-dont-allow-restarting-of-system-calls.patch
-timer-initialization-cleanup-define_timer.patch
-more-spin_lock_unlocked-define_spinlock-conversions.patch
-mm-filemapc-make-two-functions-static.patch
-mm-filemapc-make-sync_page_range_nolock-static.patch
-mm-filemapc-make-generic_file_direct_io-static.patch
-applicom-fix-error-handling.patch
-drivers-char-lcdc-misc_register-can-fail.patch
-hdpu_cpustate-misc_register-can-fail.patch
-sb16_csp-remove-home-grown-le_to_cpu-macros.patch
-sb16_csp-untypedef.patch
-mm-slab-fix-sparse-warnings.patch
-char-n_tty-fix-sparse-warnings-__nocast-type.patch
-kernel-acct-add-kerneldoc.patch
-ppc-c99-initializers-for-hw_interrupt_type-structures.patch
-sh-c99-initializers-for-hw_interrupt_type-structures.patch
-v850-c99-initializers-for-hw_interrupt_type-structures.patch
-sh64-c99-initializers-for-hw_interrupt_type-structures.patch
-add-kerneldoc-reference-to-codingstyle.patch
-mm-swap_state-fix-nocast-type-warnings.patch
-spelling-fixes-for-documentation.patch
-lib-radix-tree-fix-nocast-type-warnings.patch
-dmapool-fix-nocast-type-warnings.patch
-telephony-ixj-use-msleep-instead-of-schedule_timeout.patch
-i386-smpboot-use-msleep-instead-of-schedule_timeout.patch
-update-fsf-address-in-copying.patch
-fix-unusual-placement-of-inline-keyword-in-hpet.patch
-vfree-and-kfree-cleanup-in-drivers.patch
-merge-some-from-rustys-trivial-patches.patch
-include-asm-arm26-hardirqh-remove-define-irq_enter.patch
-remove-sound-oss-skeletonc.patch
-drivers-char-lpc-use-of-the-time_after-macro.patch
-spelling-and-whitespace-fixes-for-reporting-bugs.patch
-remove-invalid-comment-in-mm-page_allocc.patch
-lib-sortc-small-cleanups.patch
-janitor-ide-min-max-macros-in-ide-timingh.patch
-janitor-net-ppp-generic-list_for_each_entry.patch
-janitor-jffs-intrep-list_for_each_entry.patch
-janitor-fs-namespacec-list_for_each_entry.patch
-janitor-fs-dcachec-list_for_each.patch
-janitor-ide-tape-replace-schedule_timeout-with-msleep.patch
-janitor-block-umem-replace-printk-with-pr_debug.patch
-janitor-tulip-de4x5-list_for_each.patch
-janitor-sh-bigsur-io-minmax-removal.patch
-janitor-sh-hd64465-minmax-removal.patch
-janitor-block-xd-replace-schedule_timeout-with-msleep-msleep_interruptible.patch
-janitor-ide-ide-cs-replace-schedule_timeout-with-msleep.patch
-janitor-reiserfs-superc-vfree-checking-cleanups.patch
-include-asm-i386-extern-inline-static-inline.patch
-include-linux-blkdevh-extern-inline-static-inline.patch
-extern-inline-static-inline.patch
-include-linux-bioh-extern-inline-static-inline.patch
-remove-acpi-s4bios-support.patch
-fs-cramfs-uncompressc-should-include-linux-cramfs_fsh.patch
-i386-x86_64-make-get_cpu_vendor-static.patch
-schedule_timeout_uninterruptible.patch
-include-update-jiffies-musecs-conversion-functions.patch
-timeh-remove-ifdefs.patch
-fs-fix-up-schedule_timeout-usage.patch
-kernel-fix-up-schedule_timeout-usage.patch
-mm-fix-up-schedule_timeout-usage.patch
-alpha-fix-up-schedule_timeout-usage.patch
-i386-fix-up-schedule_timeout-usage.patch
-mips-fix-up-schedule_timeout-usage.patch
-drivers-block-fix-up-schedule_timeout-usage.patch
-drivers-cdrom-fix-up-schedule_timeout-usage.patch
-drivers-cdrom-fix-up-schedule_timeout-usage-fix.patch
-drivers-char-fix-up-schedule_timeout-usage.patch
-drivers-dlm-fix-up-schedule_timeout-usage.patch
-parport-fix-up-schedule_timeout-usage.patch
-parport-fix-up-schedule_timeout-usage-fix.patch
-telephony-fix-up-schedule_timeout-usage.patch
-drivers-usb-fix-up-schedule_timeout-usage-fix.patch
Merged
+fbdev-kconfig-fix.patch
fbdev fix
+set-ibm-thinkpad-extras-to-default-n-in-kconfig.patch
+dont-set-dcdbas-driver-to-default-m.patch
+pnpacpi-only-parse-device-that-have-crs-method.patch
+pnpacpi-clean-blacklist.patch
acpi fixes
+atiixp_modem-printk-fixes.patch
Fix some printks
-gregkh-driver-sysfs-strip_leading_trailing_whitespace.patch
-gregkh-driver-sysfs-strip_leading_trailing_whitespace-fix.patch
Dropped
+gregkh-driver-firmware_documenation.patch
+gregkh-driver-aoe-01.patch
+gregkh-driver-aoe-02.patch
Greg's driver tree
+gregkh-i2c-hdaps.patch
+gregkh-i2c-i2c-nforce-drop-define.patch
+gregkh-i2c-hwmon-w83627hf.patch
+gregkh-i2c-hwmon-smsc47m1.patch
+gregkh-i2c-hwmon-force_addr-fix.patch
Greg's i2c tree
+i2c-keywest-warning-fix.patch
warning fix
+git-ia64-fixup.patch
Fix reject in git-ia64.patch
-sata_sisc-introducing-device-id-0x182.patch
Dropped
+netlink-connector.patch
The netlink connector again (wrong version thereof)
+git-ocfs2-prep.patch
Make git-ocfs2.patch apply.
-arch-pci_find_device-remove-sparc64-kernel-ebusc-fix.patch
Folded into arch-pci_find_device-remove-sparc64-kernel-ebusc.patch
+pci-block-config-access-during-bist-fix-43.patch
+pci-block-config-access-during-bist-resend.patch
Fix pci-block-config-access-during-bist.patch
+fix-buffer-overrun-in-rpadlpar_sysfsc.patch
driver sysfs fix
+megaraid-mode_sense-fix.patch
Megaraid fix
+scsi-sas-makefile-and-kconfig.patch
+sas_class-include-files-in-include-scsi-sas.patch
+sas-class-core-files.patch
+aic94xx-the-aic94xx-sas-lldd.patch
Serial Attached SCSI driver and infrastructure. Doesn't compile under
gcc-2.95.x, will probably drop this after it's had a couple of -mm testing
cycles.
+apple-usb-touchpad-driver-2.patch
This is back again
+x86_64-gcc4-unzip-warnings.patch
+x86_64-cfi.patch
+x86_64-suspend-include.patch
+x86_64-msr-merge.patch
+x86_64-oops-irq.patch
+x86_64-init-rsp.patch
+x86_64-remove-vxtime-hz.patch
+x86_64-nmi-vector.patch
+x86_64-cmpxchg-constraints.patch
+x86_64-nmi-newline.patch
+x86_64-i387-sig.patch
+x86_64-include-irq.patch
+x86_64-allow-framepointer.patch
+x86_64-dmi-warning.patch
+x86_64-smaller-bug.patch
+x86_64-srat-early-cutoff.patch
+x86_64-srat-cleanup.patch
+x86_64-srat-conflict.patch
+x86_64-local-add-fix.patch
x86_64 updates
+x86_64-dma32-srat-fix.patch
Fix it.
+vm-kswapd-cleanup-use-pgdat.patch
VM cleanup
+mm-try-to-allocate-higher-order-pages-in-rmqueue_bulk.patch
+mm-try-to-allocate-higher-order-pages-in-rmqueue_bulk-fix.patch
+mm-page_alloc-increase-size-of-per-cpu-pages.patch
+mm-set-per-cpu-pages-lower-threshold-to-zero.patch
Page allocator tuning
+mm-move_pte-to-remap-zero_page.patch
mm cleanup
+fix-mpol_f_verify.patch
+convert-mempolicies-to-nodemask_t.patch
+remove-near-all-bugs-in-mm-mempolicyc.patch
NUMA memory allocator fixes
+memory-hotplug-i386-addition-functions-highmem-fix.patch
Fix memory-hotplug-i386-addition-functions-warning-fix.patch
+3c59xc-cleanup-mdio_read-routines.patch
+3c59x-avoid-blindly-reading-link-status-twice.patch
+s2io-warning-fixes.patch
+pcnet32-set-min-ring-size-to-4.patch
Net driver updates
+acx-update.patch
Updates to the TI ACX1xx wireless network driver
+ppc32-discard-exittext-and-exitdata-sections.patch
+ppc32-remove-use-of-asm-segmenth.patch
ppc32 updates
+i386-kill-off-config_pc.patch
+x86-cmpxchg-improvements.patch
+i386-dont-miss-pending-signals-returning-to-user-mode-after-signal-processing.patch
x86 updates
-i386-transparent-paravirtualization-sub-arch-move-msr-accessors-into-the-sub-arch-layer.patch
-i386-transparent-paravirtualization-sub-arch-move-privileged-processor-operations-to-the-subarch-layer.patch
-i386-transparent-paravirtualization-sub-arch-move-sensitive-system-definitions-into-the-sub-arch-layer.patch
-i386-transparent-paravirtualization-sub-arch-move-tlb-flush-definitions-to-the-sub-architecture-level.patch
-i386-transparent-paravirtualization-sub-arch-move-descriptor-table-management-into-the-sub-arch-layer.patch
-i386-transparent-paravirtualization-sub-arch-move-sensitive-i-o-instructions-into-the-sub-arch-layer.patch
-i386-transparent-paravirtualization-sub-arch-create-accessors-that-allow-the-i386-kernel-to-run-at.patch
-i386-transparent-paravirtualization-sub-arch-create-mmu-2-3-level-accessors-in-the-sub-arch-layer.patch
-i386--make-write-ldt-return-error-code.patch
-i386--remove-ugly-tls-code.patch
-i386--remove-unnecessary-tls-init.patch
-i386--clean-up-asm-and-volatile-keywords-in-desc.patch
-i386--use-early-clobber-to-eliminate-rotate-in-desc.patch
-i386--add-some-segment-convenience-functions.patch
-i386--add-some-descriptor-convenience-functions.patch
-i386--add-a-per-cpu-gdt-accessor.patch
-i386--typecheck-and-optimize-base-and-limit-accessors.patch
-i386--typecheck-and-optimize-base-and-limit-accessors-fix.patch
-i386--typecheck-and-optimize-base-and-limit-accessors-fix-tidy.patch
-i386--move-descriptor-accessors-into-desc-h.patch
-i386--eliminate-yet-another-redundant-accessor.patch
-i386--move-context-switch-inline.patch
-i386--introduce-hypervisor-ldt-hooks.patch
-i386--introduce-hypervisor-lazy-pinning-hooks.patch
-i386-virtualization-fix-uml-build.patch
-i386-virtualization-remove-some-dead-debugging-code.patch
-i386-virtualization-make-ldt-a-desc-struct.patch
-i386-virtualization-ldt-kprobes-bugfix.patch
-i386-virtualization-make-generic-set-wrprotect-a-macro.patch
-i386-virtualization-attempt-to-clean-up-pgtable-code-motion.patch
-i386-fix-desc-empty.patch
Dropped. I'll be picking these up via the git-virt tree (Chris Wright)
soon. Right now the tree doesn't come out right due to git-related woes.
-x86-64-ptrace-ia32-bp-fix.patch
Dropped. Makes 32-bit apps crash.
-pselect-ppoll-system-calls.patch
Dropped - needs work
+free-initrd-mem-adjustment.patch
+free-initrd-mem-adjustment-fix.patch
Boot-time fix
+fix-sys_poll-large-timeout-handling.patch
Fix poll() timeout thresholding
+make-build_bug_on-fail-at-compile-time.patch
Make BUILD_BUG_ON() fail at compile time
+set_current_state-commentary.patch
Add comments to set_current_state()
+schedule_timeout_interruptible-speedup.patch
Speed up schedule_timeout_[un]interruptible()
+remove-unnecessary-check_region-references-in-comments.patch
check_region() cleanup
+use-add_taint-for-setting-tainted-bit-flags.patch
cleanup
+reiserfs_file_write-should-mark-inodes-dirty.patch
reiserfs3 fix
+as-cooperating-processes.patch
+as-cooperating-processes-cant-spel.patch
+as-tidy.patch
ANticipatory scheduler work
+cciss-new-controller-pci-subsystem-ids.patch
+cciss-busy_initializing-flag.patch
+cciss-new-disk-register-deregister-routines.patch
+cciss-direct-lookup-for-command-completions.patch
+cciss-bug-fix-in-cciss_remove_one.patch
+cciss-fix-for-dma-brokeness.patch
+cciss-one-button-disaster-recovery-support.patch
+cciss-scsi-tape-info-for-proc.patch
CCISS update
+parport-constification-fix.patch
Fix parport-constification.patch
+fix-bogus-bug_on-in-pktcdvd.patch
+pktcdvd-documentation-update.patch
+pktcdvd-more-accurate-i-o-accounting.patch
+use-kcalloc-and-kzalloc-in-pktcdvd.patch
+pktcdvd-bug_on-cleanups.patch
Packet driver updates
-ipmi-convert-driver-over-to-use-refcounts.patch
Dropped - needs work
+sharpsl-add-an-input-keyboard-driver-for-zaurus.patch
Zaurus update
-rapidio-support-net-driver-fixes.patch
Folded into rapidio-support-net-driver.patch
+drivers-dlm-fix-up-schedule_timeout-usage.patch
dlm cleanup
+nfsd4-printk-reduction.patch
+nfsd4-move-replay_owner.patch
+nfsd4-fix-open-seqid-incrementing-in-lock.patch
+nfsd4-fix-setclientid-unlock-of-unlocked-state-lock.patch
+code-cleanups-in-calbacks-in-svcsock.patch
NFS server updates
-debug-preempt-tracing.patch
-debug-preempt-tracing-fix.patch
-debug-preempt-tracing-fix-2.patch
-debug-preempt-tracing-fix-3.patch
Dropped - it breaks ppc64. Still working out why this started happening.
-ingo-nfs-stuff-fix.patch
Folded into ingo-nfs-stuff.patch
-make-kmalloc-fail-for-swapped-size--gfp-flags-fix.patch
-make-kmalloc-fail-for-swapped-size--gfp-flags-aic-fix.patch
-s390-fix-invalid-kmalloc-flags.patch
-fix-invalid-kmalloc-flags-gfp_dma-alone.patch
Folded into make-kmalloc-fail-for-swapped-size--gfp-flags.patch
+page-owner-tracking-leak-detector-fix.patch
Fix page-owner-tracking-leak-detector.patch
-perfctr.patch
-fix-pm_message_t-stuff-in-mm-tree-perfctr.patch
Dropped
-sched-add-cacheflush-asm.patch
-scheduler-cache-hot-autodetect.patch
Dropped again - breaks NUMAQ
+v4l-experimental-sliced-vbi-api-support.patch
+v4l-fixup-on-cx88_dvb-for-dvico-hdtv5-gold.patch
v4l updates
+sis5513-support-sis-965l.patch
+ide-fix-null-request-pointer-for-taskfile-ioctl.patch
IDE fixes
+minor-fbcon_scroll-adjustment.patch
+fbcon-constify-font-data.patch
+matroxfb-adjustments.patch
fbdev updates
+doc-update-oops-tracingtxt-tainted-flags.patch
+tell-people-not-to-use-pm_register.patch
+documentation-ioctl-messtxt-start-tree-wide-ioctl-registry.patch
+documentation-ioctl-messtxt-add-260-more-ioctls.patch
Documentation updates
+drivers-net-wan-replace-custom-macro-with-isdigit-isxdigit.patch
cleanup
-net-fix-up-schedule_timeout-usage-fix.patch
-net-fix-up-schedule_timeout-usage-fix-2.patch
Folded into net-fix-up-schedule_timeout-usage.patch
+arch-i386-replace-custom-macro-with-isdigit.patch
+drivers-video-replace-custom-macro-with-isdigit.patch
+jbd-remove-duplicated-debug-print.patch
+feature-removal-of-io_remap_page_range.patch
Little fixes
+tty-layer-buffering-revamp-s390-fixes.patch
+moxa-intellio.patch
+tty-layer-buffering-revamp-speakup-fix.patch
+tty-layer-buffering-revamp-mkiss-update-re-introduced-defunct-receive_room-function.patch
+clean-up-computone-remaining-cli-use.patch
tty fixes
All 473 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm3/patch-list
Hi,
[1.] One line summary of the problem:
System oops when I do F3 (file view) in mc on /proc/page_owner
[2.] Full description of the problem/report:
[3.] Keywords (i.e., modules, networking, kernel):
vfs, page_owner, full reproductively
[4.] Kernel version (from /proc/version):
Linux version 2.6.13-mm3 ([email protected]) (gcc version 3.3.5 (Debian
1:3.3.5-13)) #4 SMP PREEMPT Mon Sep 12 12:14:24 CEST 2005
[5.] Output of Oops
Sep 12 12:24:53 ng02 kernel: Badness in vsnprintf at lib/vsprintf.c:278
Sep 12 12:24:53 ng02 kernel: [<c01f85ed>] vsnprintf+0x4ed/0x4f0
Sep 12 12:24:53 ng02 kernel: [<c0152aa6>] poison_obj+0x36/0x60
Sep 12 12:24:53 ng02 kernel: [<c01f8657>] snprintf+0x27/0x30
Sep 12 12:24:53 ng02 kernel: [<c01a982e>] read_page_owner+0x14e/0x1d0
Sep 12 12:24:53 ng02 kernel: [<c0152aa6>] poison_obj+0x36/0x60
Sep 12 12:24:53 ng02 kernel: [<c01e1fd4>] selinux_file_permission+0x124/0x160
Sep 12 12:24:53 ng02 kernel: [<c016d559>] vfs_read+0xe9/0x1b0
Sep 12 12:24:53 ng02 kernel: [<c016d941>] sys_read+0x51/0x80
Sep 12 12:24:53 ng02 kernel: [<c0103255>] syscall_call+0x7/0xb
Sep 12 12:24:53 ng02 kernel: slab error in cache_free_debugcheck():
cache `size-32': double free, or memory outside object was overwritten
Sep 12 12:24:53 ng02 kernel: [<c015452d>] cache_free_debugcheck+0x22d/0x2b0
Sep 12 12:24:53 ng02 kernel: [<c015522f>] kfree+0x5f/0xb0
Sep 12 12:24:53 ng02 kernel: [<c01a9886>] read_page_owner+0x1a6/0x1d0
Sep 12 12:24:53 ng02 kernel: [<c01a9886>] read_page_owner+0x1a6/0x1d0
Sep 12 12:24:53 ng02 kernel: [<c01556cb>] do_tune_cpucache+0x11b/0x1d0
Sep 12 12:24:53 ng02 kernel: [<c016d559>] vfs_read+0xe9/0x1b0
Sep 12 12:24:53 ng02 kernel: [<c016d941>] sys_read+0x51/0x80
Sep 12 12:24:53 ng02 kernel: [<c0103255>] syscall_call+0x7/0xb
Sep 12 12:24:53 ng02 kernel: efaa8e7c: redzone 1: 0x170fc2a5, redzone
2: 0x38783020.
[7.] Environment
[7.1.] Software
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux ng02.pl 2.6.13-mm3 #4 SMP PREEMPT Mon Sep 12 12:14:24 CEST 2005
i686 GNU/Linux
Gnu C 3.3.5
Gnu make 3.80
binutils 2.15
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre1
e2fsprogs 1.37
reiserfsprogs line
reiser4progs line
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Linux C++ Library 6.0.4
Procps 3.2.1
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.2.1
udev 056
Modules Loaded md5 ipv6 af_packet parport_pc parport 8250_pnp
8250 serial_core rtc snd_intel8x0 snd_ac97_codec snd_ac97_bus
snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore
snd_page_alloc hw_random ehci_hcd uhci_hcd usbcore sk98lin i2c_isa
i2c_i801 i2c_core ide_cd cdrom unix
[7.8.] dmesg log
[..]
kobject_hotplug: /sbin/udevsend net seq=925 HOME=/
PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add DEVPATH=/class/net/sit0
SUBSYSTEM=net
eth0: no IPv6 routers present
Badness in vsnprintf at lib/vsprintf.c:278
[<c01f85ed>] vsnprintf+0x4ed/0x4f0
[<c0152aa6>] poison_obj+0x36/0x60
[<c01f8657>] snprintf+0x27/0x30
[<c01a982e>] read_page_owner+0x14e/0x1d0
[<c0152aa6>] poison_obj+0x36/0x60
[<c01e1fd4>] selinux_file_permission+0x124/0x160
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
slab error in cache_free_debugcheck(): cache `size-32': double free,
or memory outside object was overwritten
[<c015452d>] cache_free_debugcheck+0x22d/0x2b0
[<c015522f>] kfree+0x5f/0xb0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01556cb>] do_tune_cpucache+0x11b/0x1d0
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
efaa8e7c: redzone 1: 0x170fc2a5, redzone 2: 0x38783020.
slab error in cache_free_debugcheck(): cache `size-32': double free,
or memory outside object was overwritten
[<c015452d>] cache_free_debugcheck+0x22d/0x2b0
[<c015522f>] kfree+0x5f/0xb0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01556cb>] do_tune_cpucache+0x11b/0x1d0
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
f358f770: redzone 1: 0x170fc2a5, redzone 2: 0x38783020.
slab error in cache_free_debugcheck(): cache `size-32': double free,
or memory outside object was overwritten
[<c015452d>] cache_free_debugcheck+0x22d/0x2b0
[<c015522f>] kfree+0x5f/0xb0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01556cb>] do_tune_cpucache+0x11b/0x1d0
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
f500a8d0: redzone 1: 0x170fc2a5, redzone 2: 0x38783020.
slab error in cache_free_debugcheck(): cache `size-32': double free,
or memory outside object was overwritten
[<c015452d>] cache_free_debugcheck+0x22d/0x2b0
[<c015522f>] kfree+0x5f/0xb0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01556cb>] do_tune_cpucache+0x11b/0x1d0
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
ec947da0: redzone 1: 0x170fc2a5, redzone 2: 0x38783020.
Slab corruption: start=ec947dd0, len=32
Redzone: 0xa306430/0x5a2cf071.
Last user: [<c01810e6>](vfs_rename+0x176/0x490)
000: 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Prev obj: start=ec947da4, len=32
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c01a9886>](read_page_owner+0x1a6/0x1d0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
Next obj: start=ec947dfc, len=32
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c016e7ed>](__fput+0xcd/0x210)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
slab error in cache_alloc_debugcheck_after(): cache `size-32': double
free, or memory outside object was overwritten
[<c0154a4d>] cache_alloc_debugcheck_after+0x10d/0x1d0
[<c02ee89d>] _spin_unlock_irqrestore+0x1d/0x40
[<c0154e1d>] kmem_cache_alloc+0x6d/0xc0
[<c01de85e>] file_alloc_security+0x3e/0xb0
[<c01de85e>] file_alloc_security+0x3e/0xb0
[<c016e5e0>] get_empty_filp+0x60/0x150
[<c0152aa6>] poison_obj+0x36/0x60
[<c016c75e>] filp_open+0x2e/0xe0
[<c01f9365>] strncpy_from_user+0x55/0x90
[<c02ee805>] _spin_unlock+0x15/0x30
[<c016c8f7>] get_unused_fd+0xa7/0xd0
[<c016ca2f>] do_sys_open+0x4f/0xe0
[<c0103255>] syscall_call+0x7/0xb
ec947dcc: redzone 1: 0xa306430, redzone 2: 0x5a2cf071.
[8.] Config file
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-mm3
# Mon Sep 12 12:00:26 2005
#
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_PHYSDEV is not set
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
# CONFIG_IP_NF_MATCH_CONNBYTES is not set
CONFIG_IP_NF_MATCH_HASHLIMIT=m
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
CONFIG_CBUS=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI Transport Layers
#
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_ATA_ADMA is not set
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_DEVICE=m
# CONFIG_DLM_DEBUG is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SECLVL=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
OOPS Reporting Tool v.b5
http://www.wsi.edu.pl/~piotrowskim/
/files/ort/beta/
Regards,
Michal Piotrowski
Hi,
[1.] One line summary of the problem:
System oops when I do F3 (file view) in mc on /proc/page_owner
[2.] Full description of the problem/report:
[3.] Keywords (i.e., modules, networking, kernel):
vfs, page_owner, full reproductively
[4.] Kernel version (from /proc/version):
Linux version 2.6.13-mm3 ([email protected]) (gcc version 3.3.5 (Debian
1:3.3.5-13)) #4 SMP PREEMPT Mon Sep 12 12:14:24 CEST 2005
[5.] Output of Oops
Sep 12 12:24:53 ng02 kernel: Badness in vsnprintf at lib/vsprintf.c:278
Sep 12 12:24:53 ng02 kernel: [<c01f85ed>] vsnprintf+0x4ed/0x4f0
Sep 12 12:24:53 ng02 kernel: [<c0152aa6>] poison_obj+0x36/0x60
Sep 12 12:24:53 ng02 kernel: [<c01f8657>] snprintf+0x27/0x30
Sep 12 12:24:53 ng02 kernel: [<c01a982e>] read_page_owner+0x14e/0x1d0
Sep 12 12:24:53 ng02 kernel: [<c0152aa6>] poison_obj+0x36/0x60
Sep 12 12:24:53 ng02 kernel: [<c01e1fd4>] selinux_file_permission+0x124/0x160
Sep 12 12:24:53 ng02 kernel: [<c016d559>] vfs_read+0xe9/0x1b0
Sep 12 12:24:53 ng02 kernel: [<c016d941>] sys_read+0x51/0x80
Sep 12 12:24:53 ng02 kernel: [<c0103255>] syscall_call+0x7/0xb
Sep 12 12:24:53 ng02 kernel: slab error in cache_free_debugcheck():
cache `size-32': double free, or memory outside object was overwritten
Sep 12 12:24:53 ng02 kernel: [<c015452d>] cache_free_debugcheck+0x22d/0x2b0
Sep 12 12:24:53 ng02 kernel: [<c015522f>] kfree+0x5f/0xb0
Sep 12 12:24:53 ng02 kernel: [<c01a9886>] read_page_owner+0x1a6/0x1d0
Sep 12 12:24:53 ng02 kernel: [<c01a9886>] read_page_owner+0x1a6/0x1d0
Sep 12 12:24:53 ng02 kernel: [<c01556cb>] do_tune_cpucache+0x11b/0x1d0
Sep 12 12:24:53 ng02 kernel: [<c016d559>] vfs_read+0xe9/0x1b0
Sep 12 12:24:53 ng02 kernel: [<c016d941>] sys_read+0x51/0x80
Sep 12 12:24:53 ng02 kernel: [<c0103255>] syscall_call+0x7/0xb
Sep 12 12:24:53 ng02 kernel: efaa8e7c: redzone 1: 0x170fc2a5, redzone
2: 0x38783020.
[7.] Environment
[7.1.] Software
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux ng02.pl 2.6.13-mm3 #4 SMP PREEMPT Mon Sep 12 12:14:24 CEST 2005
i686 GNU/Linux
Gnu C 3.3.5
Gnu make 3.80
binutils 2.15
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre1
e2fsprogs 1.37
reiserfsprogs line
reiser4progs line
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Linux C++ Library 6.0.4
Procps 3.2.1
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.2.1
udev 056
Modules Loaded md5 ipv6 af_packet parport_pc parport 8250_pnp
8250 serial_core rtc snd_intel8x0 snd_ac97_codec snd_ac97_bus
snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore
snd_page_alloc hw_random ehci_hcd uhci_hcd usbcore sk98lin i2c_isa
i2c_i801 i2c_core ide_cd cdrom unix
[7.8.] dmesg log
[..]
kobject_hotplug: /sbin/udevsend net seq=925 HOME=/
PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add DEVPATH=/class/net/sit0
SUBSYSTEM=net
eth0: no IPv6 routers present
Badness in vsnprintf at lib/vsprintf.c:278
[<c01f85ed>] vsnprintf+0x4ed/0x4f0
[<c0152aa6>] poison_obj+0x36/0x60
[<c01f8657>] snprintf+0x27/0x30
[<c01a982e>] read_page_owner+0x14e/0x1d0
[<c0152aa6>] poison_obj+0x36/0x60
[<c01e1fd4>] selinux_file_permission+0x124/0x160
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
slab error in cache_free_debugcheck(): cache `size-32': double free,
or memory outside object was overwritten
[<c015452d>] cache_free_debugcheck+0x22d/0x2b0
[<c015522f>] kfree+0x5f/0xb0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01556cb>] do_tune_cpucache+0x11b/0x1d0
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
efaa8e7c: redzone 1: 0x170fc2a5, redzone 2: 0x38783020.
slab error in cache_free_debugcheck(): cache `size-32': double free,
or memory outside object was overwritten
[<c015452d>] cache_free_debugcheck+0x22d/0x2b0
[<c015522f>] kfree+0x5f/0xb0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01556cb>] do_tune_cpucache+0x11b/0x1d0
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
f358f770: redzone 1: 0x170fc2a5, redzone 2: 0x38783020.
slab error in cache_free_debugcheck(): cache `size-32': double free,
or memory outside object was overwritten
[<c015452d>] cache_free_debugcheck+0x22d/0x2b0
[<c015522f>] kfree+0x5f/0xb0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01556cb>] do_tune_cpucache+0x11b/0x1d0
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
f500a8d0: redzone 1: 0x170fc2a5, redzone 2: 0x38783020.
slab error in cache_free_debugcheck(): cache `size-32': double free,
or memory outside object was overwritten
[<c015452d>] cache_free_debugcheck+0x22d/0x2b0
[<c015522f>] kfree+0x5f/0xb0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01a9886>] read_page_owner+0x1a6/0x1d0
[<c01556cb>] do_tune_cpucache+0x11b/0x1d0
[<c016d559>] vfs_read+0xe9/0x1b0
[<c016d941>] sys_read+0x51/0x80
[<c0103255>] syscall_call+0x7/0xb
ec947da0: redzone 1: 0x170fc2a5, redzone 2: 0x38783020.
Slab corruption: start=ec947dd0, len=32
Redzone: 0xa306430/0x5a2cf071.
Last user: [<c01810e6>](vfs_rename+0x176/0x490)
000: 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Prev obj: start=ec947da4, len=32
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c01a9886>](read_page_owner+0x1a6/0x1d0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
Next obj: start=ec947dfc, len=32
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c016e7ed>](__fput+0xcd/0x210)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
slab error in cache_alloc_debugcheck_after(): cache `size-32': double
free, or memory outside object was overwritten
[<c0154a4d>] cache_alloc_debugcheck_after+0x10d/0x1d0
[<c02ee89d>] _spin_unlock_irqrestore+0x1d/0x40
[<c0154e1d>] kmem_cache_alloc+0x6d/0xc0
[<c01de85e>] file_alloc_security+0x3e/0xb0
[<c01de85e>] file_alloc_security+0x3e/0xb0
[<c016e5e0>] get_empty_filp+0x60/0x150
[<c0152aa6>] poison_obj+0x36/0x60
[<c016c75e>] filp_open+0x2e/0xe0
[<c01f9365>] strncpy_from_user+0x55/0x90
[<c02ee805>] _spin_unlock+0x15/0x30
[<c016c8f7>] get_unused_fd+0xa7/0xd0
[<c016ca2f>] do_sys_open+0x4f/0xe0
[<c0103255>] syscall_call+0x7/0xb
ec947dcc: redzone 1: 0xa306430, redzone 2: 0x5a2cf071.
[8.] Config file
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-mm3
# Mon Sep 12 12:00:26 2005
#
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_PHYSDEV is not set
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
# CONFIG_IP_NF_MATCH_CONNBYTES is not set
CONFIG_IP_NF_MATCH_HASHLIMIT=m
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
CONFIG_CBUS=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI Transport Layers
#
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_ATA_ADMA is not set
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_DEVICE=m
# CONFIG_DLM_DEBUG is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SECLVL=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
OOPS Reporting Tool v.b5
http://www.wsi.edu.pl/~piotrowskim/
/files/ort/beta/
Regards,
Michal Piotrowski
Hi,
On 12/09/2005 9:43 p.m., Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm3/
>
> (temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.13-mm3.gz)
>
> - perfctr was dropped. Mikael has ceased development and recommends that
> the focus be upon perfmon. See
> http://sourceforge.net/mailarchive/forum.php?thread_id=8102899&forum_id=2237
>
> - There are several performance tuning patches here which need careful
> attention and testing. (Does anyone do performance testing any more?)
>
> - An update to the anticipatory scheduler to fix a performance problem
> where processes do a single read then exit, in the presence of competing
> I/O acticity.
>
> - The size of the page allocator per-cpu magazines has been increased
>
> - The page allocator has been changed to use higher-order allocations
> when batch-loading the per-cpu magazines. This is intended to give
> improved cache colouring effects however it might have the downside of
> causing extra page allocator fragmentation.
>
> - The page allocator's per-cpu magazines have had their lower threshold
> set to zero. And we can't remember why it ever had a lower threshold.
>
> - Dropped all the virtualisation preparatory patches. Will later pick these
> up from a git tree which chrisw is running.
>
> - There are still quite a few patches here for 2.6.14 (30-50, perhaps).
-mm2 and -mm3 seem good, at least compile and boot up :)
However for both, I'm seeing this when making modules_install:
if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F System.map
2.6.13-mm3; fi
WARNING: /lib/modules/2.6.13-mm3/kernel/net/ipv6/netfilter/ip6t_NFQUEUE.ko
needs unknown symbol ip6t_unregister_target
WARNING: /lib/modules/2.6.13-mm3/kernel/net/ipv6/netfilter/ip6t_NFQUEUE.ko
needs unknown symbol ip6t_register_target
[root@tornado linux-2.6]#
Seems to be caused by this option in .config set to 'm':
<M> Netfilter NFQUEUE over NFNETLINK interface
Symbol: NETFILTER_NETLINK_QUEUE [=m]
Prompt: Netfilter NFQUEUE over NFNETLINK interface
Defined at net/netfilter/Kconfig:7
Full .config up at http://www.reub.net/kernel/2.6.13-mm3-config.
I suspect there is a dependency here on ip6_tables, which I am not currently
compiling in or building as a module?
reuben
This BUG causes freeze of applications, such as beep-media-player (e.g.
uninterruptible sleep in futex with no wake), ls (un. sleep, i don't know
where), bash, when listing ntfs dirs.
------------[ cut here ]------------
kernel BUG at /l/latest/xxx/mm/slab.c:2163!
invalid operand: 0000 [#1]
PREEMPT SMP
last sysfs file: /devices/platform/i2c-9191/9191-0290/cpu0_vid
Modules linked in: it87 hwmon_vid i2c_isa sunrpc ipv6 video ftdi_sio usbserial i2c_i801
CPU: 0
EIP: 0060:[<c014b353>] Not tainted VLI
EFLAGS: 00010002 (2.6.13-mm3-g856d0bcc)
EIP is at cache_grow+0x14/0x1b0
eax: dffec180 ebx: 0000000c ecx: dffef800 edx: 80000052
esi: dffed450 edi: 80000052 ebp: c20d3af4 esp: c20d3acc
ds: 007b es: 007b ss: 0068
Process beep-media-play (pid: 5205, threadinfo=c20d3000 task=c36a6030)
Stack: c0117367 c0526030 00000003 00000002 00000000 c0526030 00000000 0000000c
dffed450 00000000 c20d3b28 c014b733 dffef800 80000052 00000000 dffed468
dffed440 dffec180 c1406ac0 c1406160 00000286 c22c7580 00000000 c20d3b3c
Call Trace:
[<c0103cc2>] show_stack+0x9a/0xd0
[<c0103e82>] show_registers+0x16a/0x1fa
[<c01040b3>] die+0x11a/0x19c
[<c03cf55e>] do_trap+0x7e/0xb2
[<c010441d>] do_invalid_op+0xa9/0xb3
[<c0103977>] error_code+0x4f/0x54
[<c014b733>] cache_alloc_refill+0x244/0x289
[<c014b98b>] kmem_cache_alloc+0x4b/0x4d
[<c01da74b>] ntfs_mapping_pairs_decompress+0x68/0x709
[<c01ce3d4>] ntfs_map_runlist_nolock+0x104/0x1a3
[<c01ce4c8>] ntfs_map_runlist+0x55/0x7f
[<c01cdecb>] ntfs_read_block+0x4d9/0x5bf
[<c01ce1ea>] ntfs_readpage+0x239/0x2ce
[<c014994f>] read_pages+0xee/0x158
[<c0149b19>] __do_page_cache_readahead+0x160/0x165
[<c0149c60>] blockable_page_cache_readahead+0x61/0xc8
[<c0149e55>] page_cache_readahead+0xea/0x17f
[<c0142a8f>] do_generic_mapping_read+0x403/0x5e6
[<c0142eb6>] __generic_file_aio_read+0x173/0x222
[<c0143063>] generic_file_read+0xa0/0xc0
[<c0160d13>] vfs_read+0x9d/0x17f
[<c01610bf>] sys_read+0x47/0x6e
[<c0102e51>] syscall_call+0x7/0xb
Code: 31 d2 89 70 18 89 78 1c 83 c0 20 83 c2 01 39 da 75 f0 5b 5e 5f 5d c3 55 89 e5 57 56 53 83 ec 1c 8b 7d 0c f7 c7 0e 80 f8 7f 74 08 <0f> 0b 73 08 99 db 3e c0 f7 c7 00 20 00 00 0f 85 78 01 00 00 89
linux_ver:
Linux bellona 2.6.13-mm3-g856d0bcc #26 SMP PREEMPT Mon Sep 12 12:58:14 CEST 2005 i686 i686 i386 GNU/Linux
Gnu C 4.0.1
Gnu make 3.80
binutils 2.15.94.0.2.2
util-linux 2.12p
mount 2.12p
module-init-tools 3.1
e2fsprogs 1.38
reiserfsprogs line
reiser4progs line
xfsprogs 2.6.13
PPP 2.4.2
nfs-utils 1.0.7
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 058
Modules Loaded it87 hwmon_vid i2c_isa sunrpc ipv6 video ftdi_sio usbserial i2c_i801
Config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-mm3
# Mon Sep 12 12:49:28 2005
#
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=3
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda3"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_NETBIOS_NS is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
# CONFIG_IP_NF_MATCH_CONNMARK is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_TARGET_CONNMARK is not set
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_CONNTRACK_NETLINK is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_AMD76XROM is not set
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI Transport Layers
#
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_ATA_ADMA is not set
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=y
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
CONFIG_USB_WACOM=y
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
On Monday 12 September 2005 10:43, Andrew Morton wrote:
> - An update to the anticipatory scheduler to fix a performance problem
> where processes do a single read then exit, in the presence of
> competing I/O acticity.
Is there more discussion on this somewhere? When was the problem introduced?
Bit of a long shot, but it fits the description of some problems I have
noticed recently.
Andrew Walrond
Jiri Slaby napsal(a):
>This BUG causes freeze of applications, such as beep-media-player (e.g.
>uninterruptible sleep in futex with no wake), ls (un. sleep, i don't know
>where), bash, when listing ntfs dirs.
>
>
[snip]
>linux_ver:
>Linux bellona 2.6.13-mm3-g856d0bcc #26 SMP PREEMPT Mon Sep 12 12:58:14 CEST 2005 i686 i686 i386 GNU/Linux
>
>
2.6.13-mm2 was maybe (i haven't get this BUG all over the time I used
it) OK. Now, I am getting it often.
--
Jiri Slaby http://www.fi.muni.cz/~xslaby
~\-/~ [email protected] ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10
Andrew Walrond wrote:
> On Monday 12 September 2005 10:43, Andrew Morton wrote:
>
>
>> - An update to the anticipatory scheduler to fix a performance problem
>> where processes do a single read then exit, in the presence of
>>competing I/O acticity.
>
>
> Is there more discussion on this somewhere? When was the problem introduced?
> Bit of a long shot, but it fits the description of some problems I have
> noticed recently.
>
It has been quite a while coming. The problem has been there for a long
time, but there is no "regression" that would not exist in eg. deadline
scheduler.
Basically it used to "miss" opportunities to do read anticipation where it
should pay off, and now it misses less.
A description of / pointer to your problems would be interesting.
Nick
--
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com
On Mon, 2005-09-12 at 16:17 +0200, Jiri Slaby wrote:
> This BUG causes freeze of applications, such as beep-media-player (e.g.
> uninterruptible sleep in futex with no wake), ls (un. sleep, i don't know
> where), bash, when listing ntfs dirs.
Ok, it is official. I can't read. All my fault. Brown paperbag time.
This should fix it:
diff --git a/fs/ntfs/malloc.h b/fs/ntfs/malloc.h
--- a/fs/ntfs/malloc.h
+++ b/fs/ntfs/malloc.h
@@ -45,7 +45,7 @@ static inline void *__ntfs_malloc(unsign
if (likely(size <= PAGE_SIZE)) {
BUG_ON(!size);
/* kmalloc() has per-CPU caches so is faster for now. */
- return kmalloc(PAGE_SIZE, gfp_mask);
+ return kmalloc(PAGE_SIZE, gfp_mask & ~__GFP_HIGHMEM);
/* return (void *)__get_free_page(gfp_mask); */
}
if (likely(size >> PAGE_SHIFT < num_physpages))
Best regards,
Anton
--
Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @)
Unix Support, Computing Service, University of Cambridge, CB2 3QH, UK
Linux NTFS maintainer / IRC: #ntfs on irc.freenode.net
WWW: http://linux-ntfs.sf.net/ & http://www-stu.christs.cam.ac.uk/~aia21/
On Mon, Sep 12, 2005 at 02:43:50AM -0700, Andrew Morton wrote:
<snip>
> - There are several performance tuning patches here which need careful
> attention and testing. (Does anyone do performance testing any more?)
<snip>
>
> - The size of the page allocator per-cpu magazines has been increased
>
> - The page allocator has been changed to use higher-order allocations
> when batch-loading the per-cpu magazines. This is intended to give
> improved cache colouring effects however it might have the downside of
> causing extra page allocator fragmentation.
>
> - The page allocator's per-cpu magazines have had their lower threshold
> set to zero. And we can't remember why it ever had a lower threshold.
>
What would you like? The usual suspects: SDET, dbench, kernbench ?
Sonny
On 9/12/05, Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm3/
>
> (temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.13-mm3.gz)
>
> - perfctr was dropped. Mikael has ceased development and recommends that
> the focus be upon perfmon. See
> http://sourceforge.net/mailarchive/forum.php?thread_id=8102899&forum_id=2237
>
> - There are several performance tuning patches here which need careful
> attention and testing. (Does anyone do performance testing any more?)
How about the tool announced months ago by Martin J. Bligh ?
http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
--
Paolo
On Mon, Sep 12, 2005 at 01:48:54PM +0200 Michal Piotrowski wrote:
> Hi,
>
> [1.] One line summary of the problem:
> System oops when I do F3 (file view) in mc on /proc/page_owner
>
> [2.] Full description of the problem/report:
>
> [3.] Keywords (i.e., modules, networking, kernel):
> vfs, page_owner, full reproductively
>
> [4.] Kernel version (from /proc/version):
> Linux version 2.6.13-mm3 ([email protected]) (gcc version 3.3.5 (Debian
> 1:3.3.5-13)) #4 SMP PREEMPT Mon Sep 12 12:14:24 CEST 2005
>
Gah, I'm such a fantastic programmer.
I don't know what mc is up to but the error checking in read_page_owner
is flawed wrt snprintf which could cause the 'size' argument to snprintf
to become negative and if so overwrite beyond 'buf'.
Again, I fail to see how mc causes this to happen, but this fixes it
by proper error checking.
Signed-off-by: Alexander Nyberg <[email protected]>
Index: mm/fs/proc/proc_misc.c
===================================================================
--- mm.orig/fs/proc/proc_misc.c 2005-09-12 16:52:22.000000000 +0200
+++ mm/fs/proc/proc_misc.c 2005-09-12 17:20:13.000000000 +0200
@@ -567,6 +567,7 @@
char namebuf[128];
unsigned long offset = 0, symsize;
int i;
+ ssize_t num_written = 0;
pfn = min_low_pfn + *ppos;
page = pfn_to_page(pfn);
@@ -588,22 +589,40 @@
if (!kbuf)
return -ENOMEM;
- ret = snprintf(kbuf, 1024, "Page allocated via order %d, mask 0x%x\n",
+ ret = snprintf(kbuf, count, "Page allocated via order %d, mask 0x%x\n",
page->order, page->gfp_mask);
+ if (ret >= count) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ num_written = ret;
for (i = 0; i < 8; i++) {
if (!page->trace[i])
break;
symname = kallsyms_lookup(page->trace[i], &symsize, &offset, &modname, namebuf);
- ret += snprintf(kbuf + ret, count - ret, "[0x%lx] %s+%lu\n",
+ ret = snprintf(kbuf + num_written, count - num_written, "[0x%lx] %s+%lu\n",
page->trace[i], namebuf, offset);
+ if (ret >= count - num_written) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ num_written += ret;
}
- ret += snprintf(kbuf + ret, count -ret, "\n");
+ ret = snprintf(kbuf + num_written, count - num_written, "\n");
+ if (ret >= count - num_written) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ num_written += ret;
+ ret = num_written;
if (copy_to_user(buf, kbuf, ret))
ret = -EFAULT;
-
+out:
kfree(kbuf);
return ret;
}
On Monday 12 September 2005 19:54, Alexander Nyberg wrote:
> Gah, I'm such a fantastic programmer.
>
> I don't know what mc is up to but the error checking in read_page_owner
> is flawed wrt snprintf which could cause the 'size' argument to snprintf
> to become negative and if so overwrite beyond 'buf'.
To prevent this, clever people invented the seq_file-API.
Even more clever people tend to use it :-)
I personally love it!
Regards
Ingo Oeser
I'm getting some build errors on ppc64 in drivers/char/hvc_console.c
CC drivers/char/hvc_console.o
drivers/char/hvc_console.c: In function `hvc_poll':
drivers/char/hvc_console.c:600: error: `count' undeclared (first use in this function)
drivers/char/hvc_console.c:600: error: (Each undeclared identifier is reported only once
drivers/char/hvc_console.c:600: error: for each function it appears in.)
drivers/char/hvc_console.c:636: error: structure has no member named `flip'
make[1]: *** [drivers/char/hvc_console.o] Error 1
make: *** [_module_drivers/char] Error 2
The count undeclared one was easy to fix but I coldn't fix the filp
structure element in 2-3 minutes so I'm punting.
Anyone have a patch to fix this driver?
Sonny
Sonny Rao <[email protected]> wrote:
>
> On Mon, Sep 12, 2005 at 02:43:50AM -0700, Andrew Morton wrote:
> <snip>
> > - There are several performance tuning patches here which need careful
> > attention and testing. (Does anyone do performance testing any more?)
> <snip>
> >
> > - The size of the page allocator per-cpu magazines has been increased
> >
> > - The page allocator has been changed to use higher-order allocations
> > when batch-loading the per-cpu magazines. This is intended to give
> > improved cache colouring effects however it might have the downside of
> > causing extra page allocator fragmentation.
> >
> > - The page allocator's per-cpu magazines have had their lower threshold
> > set to zero. And we can't remember why it ever had a lower threshold.
> >
>
> What would you like? The usual suspects: SDET, dbench, kernbench ?
>
That would be a good start, thanks. The higher-order-allocations thing is
mainly targeted at big-iron numerical computing I believe.
I've already had one report of fragmentation-derived page allocator
failures (http://bugzilla.kernel.org/show_bug.cgi?id=5229).
On 9/12/05, Paolo Ciarrocchi <[email protected]> wrote:
> On 9/12/05, Andrew Morton <[email protected]> wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm3/
> >
> > (temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.13-mm3.gz)
> >
> > - perfctr was dropped. Mikael has ceased development and recommends that
> > the focus be upon perfmon. See
> > http://sourceforge.net/mailarchive/forum.php?thread_id=8102899&forum_id=2237
> >
> > - There are several performance tuning patches here which need careful
> > attention and testing. (Does anyone do performance testing any more?)
>
> How about the tool announced months ago by Martin J. Bligh ?
>
> http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
Preferred location is: test.kernel.org (much shorter too!)
Also, the problem for -mm3 is that -mm2 did not build on most
machines. -mm1 did on 4/6. Probably some determination could be made
from those.
Thanks,
Nish
On Mon, Sep 12, 2005 at 12:56:41PM -0700, Andrew Morton wrote:
> Sonny Rao <[email protected]> wrote:
> >
> > On Mon, Sep 12, 2005 at 02:43:50AM -0700, Andrew Morton wrote:
> > <snip>
> > > - There are several performance tuning patches here which need careful
> > > attention and testing. (Does anyone do performance testing any more?)
> > <snip>
> > >
> > > - The size of the page allocator per-cpu magazines has been increased
> > >
> > > - The page allocator has been changed to use higher-order allocations
> > > when batch-loading the per-cpu magazines. This is intended to give
> > > improved cache colouring effects however it might have the downside of
> > > causing extra page allocator fragmentation.
> > >
> > > - The page allocator's per-cpu magazines have had their lower threshold
> > > set to zero. And we can't remember why it ever had a lower threshold.
> > >
> >
> > What would you like? The usual suspects: SDET, dbench, kernbench ?
> >
>
> That would be a good start, thanks. The higher-order-allocations thing is
> mainly targeted at big-iron numerical computing I believe.
I assume you're referring to allocating huge pages? I'm not sure how
one would test this other than allocating N huge pages, releasing,
runing something intensive (like SDET), and then trying to allocate
N huge pages again? Or am I off base here?
Sonny
Sonny Rao <[email protected]> wrote:
>
> On Mon, Sep 12, 2005 at 12:56:41PM -0700, Andrew Morton wrote:
> > Sonny Rao <[email protected]> wrote:
> > >
> > > On Mon, Sep 12, 2005 at 02:43:50AM -0700, Andrew Morton wrote:
> > > <snip>
> > > > - There are several performance tuning patches here which need careful
> > > > attention and testing. (Does anyone do performance testing any more?)
> > > <snip>
> > > >
> > > > - The size of the page allocator per-cpu magazines has been increased
> > > >
> > > > - The page allocator has been changed to use higher-order allocations
> > > > when batch-loading the per-cpu magazines. This is intended to give
> > > > improved cache colouring effects however it might have the downside of
> > > > causing extra page allocator fragmentation.
> > > >
> > > > - The page allocator's per-cpu magazines have had their lower threshold
> > > > set to zero. And we can't remember why it ever had a lower threshold.
> > > >
> > >
> > > What would you like? The usual suspects: SDET, dbench, kernbench ?
> > >
> >
> > That would be a good start, thanks. The higher-order-allocations thing is
> > mainly targeted at big-iron numerical computing I believe.
>
> I assume you're referring to allocating huge pages?
No. I'm referring to ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm3/broken-out/mm-try-to-allocate-higher-order-pages-in-rmqueue_bulk.patch
Sonny Rao <[email protected]> wrote:
>I assume you're referring to allocating huge pages? I'm not sure how
>one would test this other than allocating N huge pages, releasing,
>runing something intensive (like SDET), and then trying to allocate
>N huge pages again? Or am I off base here?
Run a full-feed usenet server ? ;-)
I recommend INN ....
Danny
On 9/12/05, Nish Aravamudan <[email protected]> wrote:
> On 9/12/05, Paolo Ciarrocchi <[email protected]> wrote:
> > On 9/12/05, Andrew Morton <[email protected]> wrote:
[...]
> > >
> > > - There are several performance tuning patches here which need careful
> > > attention and testing. (Does anyone do performance testing any more?)
> >
> > How about the tool announced months ago by Martin J. Bligh ?
> >
> > http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
>
> Preferred location is: test.kernel.org (much shorter too!)
I wasn't aware of that, thank you! Now I won't forget anymore that URL ;-)
> Also, the problem for -mm3 is that -mm2 did not build on most
> machines. -mm1 did on 4/6. Probably some determination could be made
> from those.
I see. But I still think that automated testing is a great opportunity
for the community to pinpoint problems.
Is there anything we can do to make thinks work better ?
--
paoloc.blogspot.com
On 9/12/05, Paolo Ciarrocchi <[email protected]> wrote:
> On 9/12/05, Nish Aravamudan <[email protected]> wrote:
> > On 9/12/05, Paolo Ciarrocchi <[email protected]> wrote:
> > > On 9/12/05, Andrew Morton <[email protected]> wrote:
> [...]
> > > >
> > > > - There are several performance tuning patches here which need careful
> > > > attention and testing. (Does anyone do performance testing any more?)
> > >
> > > How about the tool announced months ago by Martin J. Bligh ?
> > >
> > > http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
> >
> > Preferred location is: test.kernel.org (much shorter too!)
>
> I wasn't aware of that, thank you! Now I won't forget anymore that URL ;-)
That was the idea, I think :)
> > Also, the problem for -mm3 is that -mm2 did not build on most
> > machines. -mm1 did on 4/6. Probably some determination could be made
> > from those.
>
> I see. But I still think that automated testing is a great opportunity
> for the community to pinpoint problems.
Wasn't arguing that point by any means.
> Is there anything we can do to make thinks work better ?
See why the builds failed (the logs should say), e.g. for elm3b6, the
x86-64 box:
arch/x86_64/pci/built-in.o(.init.text+0xa88): In function `pci_acpi_scan_root':
: undefined reference to `pxm_to_node'
and try to fix 'em. Buildable kernels (which has been a problem for
-mm lately, I guess, with certain .configs at least) mean testable
kernels.
Might be fixed in -mm3, I dunno (those jobs haven't been spawned yet,
it would seem).
Thanks,
Nish
Hi,
On 12/09/05, Alexander Nyberg <[email protected]> wrote:
>
> Gah, I'm such a fantastic programmer.
>
> I don't know what mc is up to but the error checking in read_page_owner
> is flawed wrt snprintf which could cause the 'size' argument to snprintf
> to become negative and if so overwrite beyond 'buf'.
>
> Again, I fail to see how mc causes this to happen, but this fixes it
> by proper error checking.
>
> Signed-off-by: Alexander Nyberg <[email protected]>
Thanks, patch solved problem.
Here is version, that clean apply on 2.6.13-mm3. Can you review it?
Regards,
Michal Piotrowski
Signed-off-by: Michal K. K. Piotrowski <[email protected]>
diff -uprN -X linux-mm-clean/Documentation/dontdiff
linux-mm-clean/fs/proc/proc_misc.c linux-mm/fs/proc/proc_misc.c
--- linux-mm-clean/fs/proc/proc_misc.c 2005-09-12 23:02:10.000000000 +0200
+++ linux-mm/fs/proc/proc_misc.c 2005-09-12 22:52:51.000000000 +0200
@@ -567,6 +567,7 @@ read_page_owner(struct file *file, char
char namebuf[128];
unsigned long offset = 0, symsize;
int i;
+ ssize_t num_written = 0;
pfn = min_low_pfn + *ppos;
page = pfn_to_page(pfn);
@@ -587,23 +588,41 @@ read_page_owner(struct file *file, char
kbuf = kmalloc(count, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
+ ret = snprintf(kbuf, count, "Page allocated via order %d,
mask 0x%x\n", page->order, page->gfp_mask);
+ if (ret >= count) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ num_written = ret;
- ret = snprintf(kbuf, 1024, "Page allocated via order %d, mask 0x%x\n",
- page->order, page->gfp_mask);
for (i = 0; i < 8; i++) {
if (!page->trace[i])
break;
symname = kallsyms_lookup(page->trace[i], &symsize, &offset,
&modname, namebuf);
- ret += snprintf(kbuf + ret, count - ret, "[0x%lx] %s+%lu\n",
+ ret = snprintf(kbuf + num_written, count -
num_written, "[0x%lx] %s+%lu\n",
page->trace[i], namebuf, offset);
+ if (ret >= count - num_written) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ num_written += ret;
+
}
+ ret = snprintf(kbuf + num_written, count - num_written, "\n");
+ if (ret >= count - num_written) {
+ ret = -ENOMEM;
+ goto out;
+ }
- ret += snprintf(kbuf + ret, count -ret, "\n");
+ num_written += ret;
+ ret = num_written;
if (copy_to_user(buf, kbuf, ret))
ret = -EFAULT;
+out:
kfree(kbuf);
return ret;
}
On Mon, Sep 12, 2005 at 11:06:32PM +0200, Jiri Slaby wrote:
> > I'm getting some build errors on ppc64 in drivers/char/hvc_console.c
> >
> >
> > CC drivers/char/hvc_console.o
> > drivers/char/hvc_console.c: In function `hvc_poll':
> > drivers/char/hvc_console.c:600: error: `count' undeclared (first use in this
> > function)
> > drivers/char/hvc_console.c:600: error: (Each undeclared identifier is reported
> > only once
> > drivers/char/hvc_console.c:600: error: for each function it appears in.)
> > drivers/char/hvc_console.c:636: error: structure has no member named `flip'
> > make[1]: *** [drivers/char/hvc_console.o] Error 1
> > make: *** [_module_drivers/char] Error 2
> >
> > The count undeclared one was easy to fix but I coldn't fix the filp
> > structure element in 2-3 minutes so I'm punting.
> >
> > Anyone have a patch to fix this driver?
>
> Try this:
> ---
Hmm, that didn't build. I made my own version based on yours,
unfortunately I don't know if it boots because all my network just went
down. Hopefully, someone will confirm that the fix is correct.
--- linux-2.6.13-mm3/drivers/char/hvc_console.c~orig 2005-09-12 16:37:14.434077464 -0500
+++ linux-2.6.13-mm3/drivers/char/hvc_console.c 2005-09-12 16:37:25.466998360 -0500
@@ -597,7 +597,7 @@ static int hvc_poll(struct hvc_struct *h
/* Read data if any */
for (;;) {
- count = tty_buffer_request_room(tty, N_INBUF);
+ int count = tty_buffer_request_room(tty, N_INBUF);
/* If flip is full, just reschedule a later read */
if (count == 0) {
@@ -633,7 +633,7 @@ static int hvc_poll(struct hvc_struct *h
tty_insert_flip_char(tty, buf[i], 0);
}
- if (tty->flip.count)
+ if (tty->buf.tail->used)
tty_schedule_flip(tty);
/*
On Mon, Sep 12, 2005 at 09:03:12PM +0000, Danny ter Haar wrote:
> Sonny Rao <[email protected]> wrote:
> >I assume you're referring to allocating huge pages? I'm not sure how
> >one would test this other than allocating N huge pages, releasing,
> >runing something intensive (like SDET), and then trying to allocate
> >N huge pages again? Or am I off base here?
>
> Run a full-feed usenet server ? ;-)
> I recommend INN ....
Are you using jumbo frames or anything like that? I can probably
replicate order > 0 allocation failures pretty easily using that, but
I don't know if that's really the issue.
Sonny
On Mon, Sep 12, 2005 at 05:49:45PM -0400, Sonny Rao wrote:
> On Mon, Sep 12, 2005 at 11:06:32PM +0200, Jiri Slaby wrote:
> > > I'm getting some build errors on ppc64 in drivers/char/hvc_console.c
> > >
> > >
> > > CC drivers/char/hvc_console.o
> > > drivers/char/hvc_console.c: In function `hvc_poll':
> > > drivers/char/hvc_console.c:600: error: `count' undeclared (first use in this
> > > function)
> > > drivers/char/hvc_console.c:600: error: (Each undeclared identifier is reported
> > > only once
> > > drivers/char/hvc_console.c:600: error: for each function it appears in.)
> > > drivers/char/hvc_console.c:636: error: structure has no member named `flip'
> > > make[1]: *** [drivers/char/hvc_console.o] Error 1
> > > make: *** [_module_drivers/char] Error 2
> > >
> > > The count undeclared one was easy to fix but I coldn't fix the filp
> > > structure element in 2-3 minutes so I'm punting.
> > >
> > > Anyone have a patch to fix this driver?
> >
> > Try this:
> > ---
>
> Hmm, that didn't build. I made my own version based on yours,
> unfortunately I don't know if it boots because all my network just went
> down. Hopefully, someone will confirm that the fix is correct.
>
>
> --- linux-2.6.13-mm3/drivers/char/hvc_console.c~orig 2005-09-12 16:37:14.434077464 -0500
> +++ linux-2.6.13-mm3/drivers/char/hvc_console.c 2005-09-12 16:37:25.466998360 -0500
> @@ -597,7 +597,7 @@ static int hvc_poll(struct hvc_struct *h
>
> /* Read data if any */
> for (;;) {
> - count = tty_buffer_request_room(tty, N_INBUF);
> + int count = tty_buffer_request_room(tty, N_INBUF);
>
> /* If flip is full, just reschedule a later read */
> if (count == 0) {
> @@ -633,7 +633,7 @@ static int hvc_poll(struct hvc_struct *h
> tty_insert_flip_char(tty, buf[i], 0);
> }
>
> - if (tty->flip.count)
> + if (tty->buf.tail->used)
> tty_schedule_flip(tty);
>
> /*
Ok so that at least started to boot (i.e. I got output to the virtual
console), now my SCSI controller won't come up:
ipr: IBM Power RAID SCSI Device Driver version: 2.0.14 (May 2, 2005)
ipr 0001:c0:01.0: Found IOA with IRQ: 337
PCI: Unable to reserve mem region #3:8000000@400b8000000 for device
0001:c0:01.0
ipr 0001:c0:01.0: Couldn't map memory range of registers
Trying to free nonexistent resource <400b8000000-400bfffffff>
I've seen it get hang right there or try to mount root fs and then
fail. Not sure if this is a PCI issue or an IPR issue, Brian?
(Adding brking to cc)
Michal Piotrowski <[email protected]> wrote:
>
> Hi,
>
> On 12/09/05, Alexander Nyberg <[email protected]> wrote:
> >
> > Gah, I'm such a fantastic programmer.
> >
> > I don't know what mc is up to but the error checking in read_page_owner
> > is flawed wrt snprintf which could cause the 'size' argument to snprintf
> > to become negative and if so overwrite beyond 'buf'.
> >
> > Again, I fail to see how mc causes this to happen, but this fixes it
> > by proper error checking.
> >
> > Signed-off-by: Alexander Nyberg <[email protected]>
>
> Thanks, patch solved problem.
Thanks.
> Here is version, that clean apply on 2.6.13-mm3. Can you review it?
That patch is all wordwrapped.
How doe sit differe from Alex's patch?
--On Monday, September 12, 2005 18:06:17 -0400 Sonny Rao <[email protected]> wrote:
> On Mon, Sep 12, 2005 at 09:03:12PM +0000, Danny ter Haar wrote:
>> Sonny Rao <[email protected]> wrote:
>> > I assume you're referring to allocating huge pages? I'm not sure how
>> > one would test this other than allocating N huge pages, releasing,
>> > runing something intensive (like SDET), and then trying to allocate
>> > N huge pages again? Or am I off base here?
>>
>> Run a full-feed usenet server ? ;-)
>> I recommend INN ....
>
> Are you using jumbo frames or anything like that? I can probably
> replicate order > 0 allocation failures pretty easily using that, but
> I don't know if that's really the issue.
Jumbo frames, 8K kernel stacks, CIFS, and possibly NFS (though people dispute
that) tend to be the main culprits, in my experience.
M.
--On Monday, September 12, 2005 23:04:47 +0200 Paolo Ciarrocchi <[email protected]> wrote:
> On 9/12/05, Nish Aravamudan <[email protected]> wrote:
>> On 9/12/05, Paolo Ciarrocchi <[email protected]> wrote:
>> > On 9/12/05, Andrew Morton <[email protected]> wrote:
> [...]
>> > >
>> > > - There are several performance tuning patches here which need careful
>> > > attention and testing. (Does anyone do performance testing any more?)
>> >
>> > How about the tool announced months ago by Martin J. Bligh ?
>> >
>> > http://ftp.kernel.org/pub/linux/kernel/people/mbligh/abat/regression_matrix.html
>>
>> Preferred location is: test.kernel.org (much shorter too!)
>
> I wasn't aware of that, thank you! Now I won't forget anymore that URL ;-)
>
>> Also, the problem for -mm3 is that -mm2 did not build on most
>> machines. -mm1 did on 4/6. Probably some determination could be made
>> from those.
>
> I see. But I still think that automated testing is a great opportunity
> for the community to pinpoint problems.
>
> Is there anything we can do to make thinks work better ?
Stop breaking kernels from compiling? ;-) If people tested their patches
before fixing them, would make it easier ...
Or as Nish suggested, fixing some of them helps. it's exhausting to try
to debug all of them myself. Yes, I'm aware that some require specific
hardware access, and are a pain in the butt ...
I can very easily test fixes that are sent to me as a straight patch
URL on top of the kernel in question, anything else is a hassle (hint:
this ain't a full-time job for me ;-))
M.
diff -uprN -X linux-mm-clean/Documentation/dontdiff linux-mm-clean/fs/proc/proc_misc.c linux-mm/fs/proc/proc_misc.c
--- linux-mm-clean/fs/proc/proc_misc.c 2005-09-12 23:02:10.000000000 +0200
+++ linux-mm/fs/proc/proc_misc.c 2005-09-12 22:52:51.000000000 +0200
@@ -567,6 +567,7 @@ read_page_owner(struct file *file, char
char namebuf[128];
unsigned long offset = 0, symsize;
int i;
+ ssize_t num_written = 0;
pfn = min_low_pfn + *ppos;
page = pfn_to_page(pfn);
@@ -587,23 +588,41 @@ read_page_owner(struct file *file, char
kbuf = kmalloc(count, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
+ ret = snprintf(kbuf, count, "Page allocated via order %d, mask 0x%x\n", page->order, page->gfp_mask);
+ if (ret >= count) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ num_written = ret;
- ret = snprintf(kbuf, 1024, "Page allocated via order %d, mask 0x%x\n",
- page->order, page->gfp_mask);
for (i = 0; i < 8; i++) {
if (!page->trace[i])
break;
symname = kallsyms_lookup(page->trace[i], &symsize, &offset, &modname, namebuf);
- ret += snprintf(kbuf + ret, count - ret, "[0x%lx] %s+%lu\n",
+ ret = snprintf(kbuf + num_written, count - num_written, "[0x%lx] %s+%lu\n",
page->trace[i], namebuf, offset);
+ if (ret >= count - num_written) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ num_written += ret;
+
}
+ ret = snprintf(kbuf + num_written, count - num_written, "\n");
+ if (ret >= count - num_written) {
+ ret = -ENOMEM;
+ goto out;
+ }
- ret += snprintf(kbuf + ret, count -ret, "\n");
+ num_written += ret;
+ ret = num_written;
if (copy_to_user(buf, kbuf, ret))
ret = -EFAULT;
+out:
kfree(kbuf);
return ret;
}
Michal Piotrowski <[email protected]> wrote:
>
> Andrew Morton napisa__(a):
> > Michal Piotrowski <[email protected]> wrote:
> >
> >>Hi,
>
> >>Thanks, patch solved problem.
> >
> >
> > Thanks.
> >
> >
> >>Here is version, that clean apply on 2.6.13-mm3. Can you review it?
> >
> >
> > That patch is all wordwrapped.
>
> Ups, sorry. This should be good.
Still wordwrapped. Email test patches to yourself, make sure they still
apply.
> >
> > How doe sit differe from Alex's patch?
> >
> >
>
> Alex's patch doesn't apply clean on 2.6.13-mm3.
Well if you made no functional changes then I'll just apply Alex's patch,
thanks.
CC [M] drivers/usb/class/bluetty.o
drivers/usb/class/bluetty.c: In function `bluetooth_int_callback':
drivers/usb/class/bluetty.c:797: Fehler: structure hat kein Element namens ?flip?
drivers/usb/class/bluetty.c: In function `bluetooth_read_bulk_callback':
drivers/usb/class/bluetty.c:925: Fehler: structure hat kein Element namens ?flip?
make[3]: *** [drivers/usb/class/bluetty.o] Fehler 1
make[2]: *** [drivers/usb/class] Fehler 2
make[1]: *** [drivers/usb] Fehler 2
make: *** [drivers] Fehler 2
I suggest alan's tty fixes are at fault.
Lion Vollnhals
Lion Vollnhals <[email protected]> wrote:
>
> I suggest alan's tty fixes are at fault.
>
Yes, the conversion is far from complete. For now, you'll need to disable
that driver in config, sorry. Or fix it ;)
Fix bluetty, after tty conversion there was an error in compilation.
Generated in 2.6.13-mm3 kernel version.
Signed-off-by: Jiri Slaby <[email protected]>
---
bluetty.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/class/bluetty.c b/drivers/usb/class/bluetty.c
--- a/drivers/usb/class/bluetty.c
+++ b/drivers/usb/class/bluetty.c
@@ -794,7 +794,7 @@ static void bluetooth_int_callback (stru
if (packet_size + EVENT_HDR_SIZE == bluetooth->int_packet_pos) {
for (i = 0; i < bluetooth->int_packet_pos; ++i) {
/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them */
- if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (!tty_buffer_request_room(bluetooth->tty, 1)) {
tty_flip_buffer_push(bluetooth->tty);
}
tty_insert_flip_char(bluetooth->tty, bluetooth->int_buffer[i], 0);
@@ -922,7 +922,7 @@ static void bluetooth_read_bulk_callback
if (packet_size + ACL_HDR_SIZE == bluetooth->bulk_packet_pos) {
for (i = 0; i < bluetooth->bulk_packet_pos; ++i) {
/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (!tty_buffer_request_room(bluetooth->tty, 1)) {
tty_flip_buffer_push(bluetooth->tty);
}
tty_insert_flip_char(bluetooth->tty, bluetooth->bulk_buffer[i], 0);
Sonny Rao napsal(a):
>On Mon, Sep 12, 2005 at 05:49:45PM -0400, Sonny Rao wrote:
>
>
>>--- linux-2.6.13-mm3/drivers/char/hvc_console.c~orig 2005-09-12 16:37:14.434077464 -0500
>>+++ linux-2.6.13-mm3/drivers/char/hvc_console.c 2005-09-12 16:37:25.466998360 -0500
>>@@ -597,7 +597,7 @@ static int hvc_poll(struct hvc_struct *h
>>
>> /* Read data if any */
>> for (;;) {
>>- count = tty_buffer_request_room(tty, N_INBUF);
>>+ int count = tty_buffer_request_room(tty, N_INBUF);
>>
>> /* If flip is full, just reschedule a later read */
>> if (count == 0) {
>>@@ -633,7 +633,7 @@ static int hvc_poll(struct hvc_struct *h
>> tty_insert_flip_char(tty, buf[i], 0);
>> }
>>
>>- if (tty->flip.count)
>>+ if (tty->buf.tail->used)
>>
>>
Is there any better way to gather this info? I think, that this was my
bad idea. Some encapsulation needed.
thanks,
--
Jiri Slaby http://www.fi.muni.cz/~xslaby
~\-/~ [email protected] ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10
Sonny Rao <[email protected]> wrote:
>Are you using jumbo frames or anything like that?
Not as far as i know.
I gave the kernel some more buffer as stated on
http://home.cern.ch/~jes/gige/acenic.html
echo 256144 > /proc/sys/net/core/rmem_max
echo 262144 > /proc/sys/net/core/wmem_max
>I can probably replicate order > 0 allocation failures pretty easily
>using that, but I don't know if that's really the issue.
I don't think that's the case , on this machine.
Danny
Martin J. Bligh <[email protected]> wrote:
>Jumbo frames, 8K kernel stacks, CIFS, and possibly NFS (though people dispute
>that) tend to be the main culprits, in my experience.
In my case i'm not using jumbo frames, CIFS and NFS.
Danny
On Tue, Sep 13, 2005 at 02:51:39AM +0200, Jiri Slaby wrote:
> Sonny Rao napsal(a):
>
> >On Mon, Sep 12, 2005 at 05:49:45PM -0400, Sonny Rao wrote:
> >
> >
> >>--- linux-2.6.13-mm3/drivers/char/hvc_console.c~orig 2005-09-12
> >>16:37:14.434077464 -0500
> >>+++ linux-2.6.13-mm3/drivers/char/hvc_console.c 2005-09-12
> >>16:37:25.466998360 -0500
> >>@@ -597,7 +597,7 @@ static int hvc_poll(struct hvc_struct *h
> >>
> >> /* Read data if any */
> >> for (;;) {
> >>- count = tty_buffer_request_room(tty, N_INBUF);
> >>+ int count = tty_buffer_request_room(tty, N_INBUF);
> >>
> >> /* If flip is full, just reschedule a later read */
> >> if (count == 0) {
> >>@@ -633,7 +633,7 @@ static int hvc_poll(struct hvc_struct *h
> >> tty_insert_flip_char(tty, buf[i], 0);
> >> }
> >>
> >>- if (tty->flip.count)
> >>+ if (tty->buf.tail->used)
> >>
> >>
> Is there any better way to gather this info? I think, that this was my
> bad idea. Some encapsulation needed.
>
I agree, this is ugly as hell. I don't know if the tty stuff was
ever supposed to be used this way. Given the revamp, and if this usage is
legal, perhaps the addition of a generic wrapper to the API is
warranted.
Sonny
On Tue, Sep 13, 2005 at 05:19:33AM +0000, Danny ter Haar wrote:
> Martin J. Bligh <[email protected]> wrote:
> >Jumbo frames, 8K kernel stacks, CIFS, and possibly NFS (though people dispute
> >that) tend to be the main culprits, in my experience.
>
> In my case i'm not using jumbo frames, CIFS and NFS.
8kb kernel stacks then?
(btw, please "reply to all" when you respond, thanks)
Sonny
On Tue, Sep 13, 2005 at 05:14:34AM +0000, Danny ter Haar wrote:
> Sonny Rao <[email protected]> wrote:
> >Are you using jumbo frames or anything like that?
>
> Not as far as i know.
>
> I gave the kernel some more buffer as stated on
> http://home.cern.ch/~jes/gige/acenic.html
>
> echo 256144 > /proc/sys/net/core/rmem_max
> echo 262144 > /proc/sys/net/core/wmem_max
Not sure if this could lead to higher order allocations -- the only
place I think it might happen is in sock_kmalloc()
Dunno, Martin?
--Sonny Rao <[email protected]> wrote (on Tuesday, September 13, 2005 03:02:04 -0400):
> On Tue, Sep 13, 2005 at 05:14:34AM +0000, Danny ter Haar wrote:
>> Sonny Rao <[email protected]> wrote:
>> > Are you using jumbo frames or anything like that?
>>
>> Not as far as i know.
>>
>> I gave the kernel some more buffer as stated on
>> http://home.cern.ch/~jes/gige/acenic.html
>>
>> echo 256144 > /proc/sys/net/core/rmem_max
>> echo 262144 > /proc/sys/net/core/wmem_max
>
> Not sure if this could lead to higher order allocations -- the only
> place I think it might happen is in sock_kmalloc()
>
> Dunno, Martin?
Not sure. Throw a dump_stack in __alloc_pages conditional on if order > 0.
If it spews too much output, ratelimit it by incrementing a static variable
each time, and only printing if mod 100 or 1000 or something, but I suspect
it'll be OK at full rate.
M.
On Mon, Sep 12, 2005 at 12:56:41PM -0700, Andrew Morton wrote:
> Sonny Rao <[email protected]> wrote:
> >
> > On Mon, Sep 12, 2005 at 02:43:50AM -0700, Andrew Morton wrote:
> > <snip>
> > > - There are several performance tuning patches here which need careful
> > > attention and testing. (Does anyone do performance testing any more?)
> > <snip>
> > >
> > > - The size of the page allocator per-cpu magazines has been increased
> > >
> > > - The page allocator has been changed to use higher-order allocations
> > > when batch-loading the per-cpu magazines. This is intended to give
> > > improved cache colouring effects however it might have the downside of
> > > causing extra page allocator fragmentation.
> > >
> > > - The page allocator's per-cpu magazines have had their lower threshold
> > > set to zero. And we can't remember why it ever had a lower threshold.
> > >
> >
> > What would you like? The usual suspects: SDET, dbench, kernbench ?
> >
>
> That would be a good start, thanks. The higher-order-allocations thing is
> mainly targeted at big-iron numerical computing I believe.
>
> I've already had one report of fragmentation-derived page allocator
> failures (http://bugzilla.kernel.org/show_bug.cgi?id=5229).
Ok, I'm getting much further on ppc64 thanks to Anton B.
So far, I need patched in the hvc console fix, Anton's SCSI fix for
2.6.14-rc1, Paulus's EEH fix, and I reverted
remove-near-all-bugs-in-mm-mempolicyc.patch and
convert-mempolicies-to-nodemask_t.patch
I got most of the way through the boot scripts and crashed while
bringing up the loopback interface.
Here's the latest PPC64 crash on 2.6.13-mm3:
smp_call_function on cpu 5: other cpus not responding (5)
cpu 0x5: Vector: 0 at [c00000000f3b6b00]
pc: 000000000000003d
lr: 000000000000003d
sp: c00000000f3b6a90
msr: 8000000000009032
current = 0xc000000002018050
paca = 0xc00000000048a400
pid = 1679, comm = ip
enter ? for help
5:mon> t
(xmon hangs here)
Anyone have ideas on what to try?
On Tue, Sep 13, 2005 at 02:32:15PM -0400, Sonny Rao wrote:
> On Mon, Sep 12, 2005 at 12:56:41PM -0700, Andrew Morton wrote:
> > Sonny Rao <[email protected]> wrote:
> > >
> > > On Mon, Sep 12, 2005 at 02:43:50AM -0700, Andrew Morton wrote:
> > > <snip>
> > > > - There are several performance tuning patches here which need careful
> > > > attention and testing. (Does anyone do performance testing any more?)
> > > <snip>
> > > >
> > > > - The size of the page allocator per-cpu magazines has been increased
> > > >
> > > > - The page allocator has been changed to use higher-order allocations
> > > > when batch-loading the per-cpu magazines. This is intended to give
> > > > improved cache colouring effects however it might have the downside of
> > > > causing extra page allocator fragmentation.
> > > >
> > > > - The page allocator's per-cpu magazines have had their lower threshold
> > > > set to zero. And we can't remember why it ever had a lower threshold.
> > > >
> > >
> > > What would you like? The usual suspects: SDET, dbench, kernbench ?
> > >
> >
> > That would be a good start, thanks. The higher-order-allocations thing is
> > mainly targeted at big-iron numerical computing I believe.
> >
> > I've already had one report of fragmentation-derived page allocator
> > failures (http://bugzilla.kernel.org/show_bug.cgi?id=5229).
>
> Ok, I'm getting much further on ppc64 thanks to Anton B.
>
> So far, I need patched in the hvc console fix, Anton's SCSI fix for
> 2.6.14-rc1, Paulus's EEH fix, and I reverted
> remove-near-all-bugs-in-mm-mempolicyc.patch and
> convert-mempolicies-to-nodemask_t.patch
>
> I got most of the way through the boot scripts and crashed while
> bringing up the loopback interface.
>
> Here's the latest PPC64 crash on 2.6.13-mm3:
>
> smp_call_function on cpu 5: other cpus not responding (5)
> cpu 0x5: Vector: 0 at [c00000000f3b6b00]
> pc: 000000000000003d
> lr: 000000000000003d
> sp: c00000000f3b6a90
> msr: 8000000000009032
> current = 0xc000000002018050
> paca = 0xc00000000048a400
> pid = 1679, comm = ip
> enter ? for help
> 5:mon> t
>
> (xmon hangs here)
Here's another one with the traceback:
1:mon> e
cpu 0x1: Vector: 0 at [c0000001ebff7860]
pc: 000000000000003d
lr: 000000000000003d
sp: c0000001ebff77f0
msr: 8000000000009032
current = 0xc0000001ebf067f0
paca = 0xc000000000488400
pid = 1, comm = swapper
1:mon>
1:mon> t
[c0000001ebff77f0] c0000000000403f8 .xmon+0xf4/0x104 (unreliable)
[c0000001ebff79c0] c00000000002e6fc .smp_call_function+0x1b4/0x1e0
[c0000001ebff7a70] c000000000084d34 .smp_call_function_all_cpus+0x70/0x98
[c0000001ebff7b00] c000000000085ff4 .do_tune_cpucache+0x10c/0x68c
[c0000001ebff7ce0] c0000000000867e8 .enable_cpucache+0x9c/0xec
[c0000001ebff7d60] c0000000000878b8 .kmem_cache_create+0x5e0/0x8e4
[c0000001ebff7e60] c00000000045382c .as_init+0x38/0xbc
[c0000001ebff7ef0] c000000000008888 .init+0x1f4/0x454
[c0000001ebff7f90] c00000000000fa48 .kernel_thread+0x4c/0x68
1:mon>
I'm starting to think I'm going to have to test the above stuff on
x86... (maybe someone will prove me wrong ;-))
Sonny
On Monday 12 September 2005 11:43, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13
>-mm3/
hi,
again a general protection fault...
usb 1-2.3: USB disconnect, address 5
general protection fault: 0000 [1] PREEMPT SMP
CPU 0
Modules linked in: nls_cp437 vfat fat ppp_deflate bsd_comp ppp_async r8169
snd_bt87x
Pid: 84, comm: khubd Tainted: P 2.6.13-mm3 #12
RIP: 0010:[<ffffffff8035a005>] <ffffffff8035a005>{scsi_remove_device+53}
RSP: 0000:ffff81003f811bc8 EFLAGS: 00010246
RAX: 6b6b6b6b6b6b6b6b RBX: ffff810000902458 RCX: 0000000000000034
RDX: 0000000000000001 RSI: ffffffff80267170 RDI: 6b6b6b6b6b6b6beb
RBP: ffff81003f811bd8 R08: 0000000000000000 R09: ffff810000902458
R10: 0000000000000000 R11: 0000000000000000 R12: ffff81002dce50f8
R13: ffff8100125ca0f8 R14: ffff81002dce5108 R15: 0000000000000003
FS: 00002aaaaadfdb00(0000) GS:ffffffff806ed800(0000) knlGS:0000000056114840
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00002aaaaac56480 CR3: 0000000000101000 CR4: 00000000000006e0
Process khubd (pid: 84, threadinfo ffff81003f810000, task ffff81003fc8cea0)
Stack: 0000000000000213 ffff810000902458 ffff81003f811c08 ffffffff8035a364
ffff81002dce5110 ffff8100125ca120 ffff81002dce5110 ffff81002dce5118
ffff81003f811c28 ffffffff8035a3f7
Call Trace:<ffffffff8035a364>{__scsi_remove_target+148}
<ffffffff8035a3f7>{scsi_remove_target+39}
<ffffffff8035916b>{scsi_forget_host+75}
<ffffffff80351c9d>{scsi_remove_host+77}
<ffffffff803a20ac>{quiesce_and_remove_host+156}
<ffffffff803a2bd8>{storage_disconnect+24}
<ffffffff80380f35>{usb_unbind_interface+85}
<ffffffff802e32f1>{__device_release_driver+113}
<ffffffff802e3355>{device_release_driver+53}
<ffffffff802e2a7c>{bus_remove_device+172}
<ffffffff802e19f8>{device_del+56} <ffffffff80388b32>{usb_disable_device+178}
<ffffffff8038349e>{usb_disconnect+190} <ffffffff80384a42>{hub_thread+930}
<ffffffff8046ac8f>{thread_return+203}
<ffffffff8014bf80>{autoremove_wake_function+0}
<ffffffff8014bf80>{autoremove_wake_function+0}
<ffffffff803846a0>{hub_thread+0}
<ffffffff8014b86b>{kthread+219} <ffffffff8010ee06>{child_rip+8}
<ffffffff8014b790>{kthread+0} <ffffffff8010edfe>{child_rip+0}
Sep 15 18:55:18 dkey_amd64
Sep 15 18:55:18 dkey_amd64
Code: f0 ff 80 80 00 00 00 0f 8e 4e 07 00 00 48 83 c4 08 5b c9 c3
RIP <ffffffff8035a005>{scsi_remove_device+53} RSP <ffff81003f811bc8>
dominik
Dominik Karall <[email protected]> wrote:
>
> On Monday 12 September 2005 11:43, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13
> >-mm3/
>
> hi,
> again a general protection fault...
scsi or USB I guess.
Does the crash happen without loading any proprietary modules?
> usb 1-2.3: USB disconnect, address 5
> general protection fault: 0000 [1] PREEMPT SMP
> CPU 0
> Modules linked in: nls_cp437 vfat fat ppp_deflate bsd_comp ppp_async r8169
> snd_bt87x
> Pid: 84, comm: khubd Tainted: P 2.6.13-mm3 #12
> RIP: 0010:[<ffffffff8035a005>] <ffffffff8035a005>{scsi_remove_device+53}
> RSP: 0000:ffff81003f811bc8 EFLAGS: 00010246
> RAX: 6b6b6b6b6b6b6b6b RBX: ffff810000902458 RCX: 0000000000000034
> RDX: 0000000000000001 RSI: ffffffff80267170 RDI: 6b6b6b6b6b6b6beb
> RBP: ffff81003f811bd8 R08: 0000000000000000 R09: ffff810000902458
> R10: 0000000000000000 R11: 0000000000000000 R12: ffff81002dce50f8
> R13: ffff8100125ca0f8 R14: ffff81002dce5108 R15: 0000000000000003
> FS: 00002aaaaadfdb00(0000) GS:ffffffff806ed800(0000) knlGS:0000000056114840
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 00002aaaaac56480 CR3: 0000000000101000 CR4: 00000000000006e0
> Process khubd (pid: 84, threadinfo ffff81003f810000, task ffff81003fc8cea0)
> Stack: 0000000000000213 ffff810000902458 ffff81003f811c08 ffffffff8035a364
> ffff81002dce5110 ffff8100125ca120 ffff81002dce5110 ffff81002dce5118
> ffff81003f811c28 ffffffff8035a3f7
> Call Trace:<ffffffff8035a364>{__scsi_remove_target+148}
> <ffffffff8035a3f7>{scsi_remove_target+39}
> <ffffffff8035916b>{scsi_forget_host+75}
> <ffffffff80351c9d>{scsi_remove_host+77}
> <ffffffff803a20ac>{quiesce_and_remove_host+156}
> <ffffffff803a2bd8>{storage_disconnect+24}
> <ffffffff80380f35>{usb_unbind_interface+85}
> <ffffffff802e32f1>{__device_release_driver+113}
> <ffffffff802e3355>{device_release_driver+53}
> <ffffffff802e2a7c>{bus_remove_device+172}
> <ffffffff802e19f8>{device_del+56} <ffffffff80388b32>{usb_disable_device+178}
> <ffffffff8038349e>{usb_disconnect+190} <ffffffff80384a42>{hub_thread+930}
> <ffffffff8046ac8f>{thread_return+203}
> <ffffffff8014bf80>{autoremove_wake_function+0}
> <ffffffff8014bf80>{autoremove_wake_function+0}
> <ffffffff803846a0>{hub_thread+0}
> <ffffffff8014b86b>{kthread+219} <ffffffff8010ee06>{child_rip+8}
> <ffffffff8014b790>{kthread+0} <ffffffff8010edfe>{child_rip+0}
> Sep 15 18:55:18 dkey_amd64
> Sep 15 18:55:18 dkey_amd64
> Code: f0 ff 80 80 00 00 00 0f 8e 4e 07 00 00 48 83 c4 08 5b c9 c3
> RIP <ffffffff8035a005>{scsi_remove_device+53} RSP <ffff81003f811bc8>
>
>
> dominik
>
Andrew Morton <[email protected]> wrote:
>
> Dominik Karall <[email protected]> wrote:
> >
> > On Monday 12 September 2005 11:43, Andrew Morton wrote:
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13
> > >-mm3/
> >
> > hi,
> > again a general protection fault...
>
> scsi or USB I guess.
>
> Does the crash happen without loading any proprietary modules?
Also in 2.6.41-rc1. See
http://bugzilla.kernel.org/show_bug.cgi?id=5265
Hi, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm3/
Imported into git as v2.6.15-mm3:
http://www.kernel.org/git/?p=linux/kernel/git/smurf/linux-trees.git;a=tag;h=fa33a
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de | [email protected]
Disclaimer: The quote was selected randomly. Really. | http://smurf.noris.de
- -
"If a person can join the salvation army corps and still be
respected by his fellow-beings, he ought to be at liberty to enlist
in the ranks of reason and common sense and not forfeit respect."
[Lemuel K. Washburn, _Is The Bible Worth Reading
And Other Essays_]