This is the start of the stable review cycle for the 5.10.80 release.
There are 575 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 17 Nov 2021 16:52:23 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.80-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.80-rc1
Trond Myklebust <[email protected]>
SUNRPC: Partial revert of commit 6f9f17287e78
Pali Rohár <[email protected]>
PCI: aardvark: Fix PCIe Max Payload Size setting
Pali Rohár <[email protected]>
PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros
Jernej Skrabec <[email protected]>
drm/sun4i: Fix macros in sun8i_csc.h
Xiaoming Ni <[email protected]>
powerpc/85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n
Vasant Hegde <[email protected]>
powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload
Miquel Raynal <[email protected]>
mtd: rawnand: au1550nd: Keep the driver compatible with on-die ECC engines
Miquel Raynal <[email protected]>
mtd: rawnand: plat_nand: Keep the driver compatible with on-die ECC engines
Miquel Raynal <[email protected]>
mtd: rawnand: orion: Keep the driver compatible with on-die ECC engines
Miquel Raynal <[email protected]>
mtd: rawnand: pasemi: Keep the driver compatible with on-die ECC engines
Miquel Raynal <[email protected]>
mtd: rawnand: gpio: Keep the driver compatible with on-die ECC engines
Miquel Raynal <[email protected]>
mtd: rawnand: mpc5121: Keep the driver compatible with on-die ECC engines
Miquel Raynal <[email protected]>
mtd: rawnand: xway: Keep the driver compatible with on-die ECC engines
Miquel Raynal <[email protected]>
mtd: rawnand: ams-delta: Keep the driver compatible with on-die ECC engines
Halil Pasic <[email protected]>
s390/cio: make ccw_device_dma_* more robust
Harald Freudenberger <[email protected]>
s390/ap: Fix hanging ioctl caused by orphaned replies
Sven Schnelle <[email protected]>
s390/tape: fix timer initialization in tape_std_assign()
Vineeth Vijayan <[email protected]>
s390/cio: check the subchannel validity for dev_busid
Marek Vasut <[email protected]>
video: backlight: Drop maximum brightness override for brightness zero
Jack Andersen <[email protected]>
mfd: dln2: Add cell for initializing DLN2 ADC
Michal Hocko <[email protected]>
mm, oom: do not trigger out_of_memory from the #PF
Vasily Averin <[email protected]>
mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks
Naveen N. Rao <[email protected]>
powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
Naveen N. Rao <[email protected]>
powerpc/security: Add a helper to query stf_barrier type
Naveen N. Rao <[email protected]>
powerpc/bpf: Validate branch ranges
Naveen N. Rao <[email protected]>
powerpc/lib: Add helper to check if offset is within conditional branch range
Vasily Averin <[email protected]>
memcg: prohibit unconditional exceeding the limit of dying tasks
Dominique Martinet <[email protected]>
9p/net: fix missing error check in p9_check_errors
Daniel Borkmann <[email protected]>
net, neigh: Enable state migration between NUD_PERMANENT and NTF_USE
Jaegeuk Kim <[email protected]>
f2fs: should use GFP_NOFS for directory inodes
Guo Ren <[email protected]>
irqchip/sifive-plic: Fixup EOI failed when masked
Michael Pratt <[email protected]>
posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
Dave Jones <[email protected]>
x86/mce: Add errata workaround for Skylake SKX37
Maciej W. Rozycki <[email protected]>
MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL
Helge Deller <[email protected]>
parisc: Fix backtrace to always include init funtion names
Arnd Bergmann <[email protected]>
ARM: 9156/1: drop cc-option fallbacks for architecture selection
Michał Mirosław <[email protected]>
ARM: 9155/1: fix early early_iounmap()
Willem de Bruijn <[email protected]>
selftests/net: udpgso_bench_rx: fix port argument
Rahul Lakkireddy <[email protected]>
cxgb4: fix eeprom len when diagnostics not implemented
Dust Li <[email protected]>
net/smc: fix sk_refcnt underflow on linkdown and fallback
Eiichi Tsukata <[email protected]>
vsock: prevent unnecessary refcnt inc for nonblocking connect
Vladimir Oltean <[email protected]>
net: stmmac: allow a tc-taprio base-time of zero
Guangbin Huang <[email protected]>
net: hns3: allow configure ETS bandwidth of all TCs
Yufeng Mo <[email protected]>
net: hns3: fix kernel crash when unload VF while it is being reset
Eric Dumazet <[email protected]>
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any
Muchun Song <[email protected]>
seq_file: fix passing wrong private data
Dan Carpenter <[email protected]>
gve: Fix off by one in gve_tx_timeout()
John Fastabend <[email protected]>
bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding
John Fastabend <[email protected]>
bpf, sockmap: Remove unhash handler for BPF sockmap usage
Arnd Bergmann <[email protected]>
arm64: pgtable: make __pte_to_phys/__phys_to_pte_val inline functions
Chengfeng Ye <[email protected]>
nfc: pn533: Fix double free when pn533_fill_fragment_skbs() fails
Eric Dumazet <[email protected]>
llc: fix out-of-bound array index in llc_sk_dev_hash()
Ian Rogers <[email protected]>
perf bpf: Add missing free to bpf_event__print_bpf_prog_info()
Dan Carpenter <[email protected]>
zram: off by one in read_block_state()
Miaohe Lin <[email protected]>
mm/zsmalloc.c: close race window between zs_pool_dec_isolated() and zs_unregister_migration()
Marc Kleine-Budde <[email protected]>
can: mcp251xfd: mcp251xfd_chip_start(): fix error handling for mcp251xfd_chip_rx_int_enable()
Krzysztof Kozlowski <[email protected]>
mfd: core: Add missing of_node_put for loop iteration
Huang Guobin <[email protected]>
bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failed
Heiner Kallweit <[email protected]>
net: phy: fix duplex out of sync problem while changing settings
Tetsuo Handa <[email protected]>
ataflop: remove ataflop_probe_lock mutex
Luis Chamberlain <[email protected]>
block/ataflop: provide a helper for cleanup up an atari disk
Luis Chamberlain <[email protected]>
block/ataflop: add registration bool before calling del_gendisk()
Luis Chamberlain <[email protected]>
block/ataflop: use the blk_cleanup_disk() helper
Chenyuan Mi <[email protected]>
drm/nouveau/svm: Fix refcount leak bug and missing check against null bug
Hans de Goede <[email protected]>
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
Brett Creeley <[email protected]>
ice: Fix not stopping Tx queues for VFs
Sylwester Dziedziuch <[email protected]>
ice: Fix replacing VF hardware MAC to existing MAC filter
Ziyang Xuan <[email protected]>
net: vlan: fix a UAF in vlan_dev_real_dev()
Stafford Horne <[email protected]>
openrisc: fix SMP tlb flush NULL pointer dereference
Jakub Kicinski <[email protected]>
ethtool: fix ethtool msg len calculation for pause stats
Maxim Kiselev <[email protected]>
net: davinci_emac: Fix interrupt pacing disable
YueHaibing <[email protected]>
xen-pciback: Fix return in pm_ctrl_init()
Christophe JAILLET <[email protected]>
i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'
Trond Myklebust <[email protected]>
NFSv4: Fix a regression in nfs_set_open_stateid_locked()
Quinn Tran <[email protected]>
scsi: qla2xxx: Turn off target reset during issue_lip
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix gnl list corruption
Quinn Tran <[email protected]>
scsi: qla2xxx: Relogin during fabric disturbance
Saurav Kashyap <[email protected]>
scsi: qla2xxx: Changes to support FCP2 Target
Jackie Liu <[email protected]>
ar7: fix kernel builds for compiler test
Ahmad Fatoum <[email protected]>
watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUT
Randy Dunlap <[email protected]>
m68k: set a default value for MEMORY_RESERVE
Eric W. Biederman <[email protected]>
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
Lars-Peter Clausen <[email protected]>
dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`
Florian Westphal <[email protected]>
netfilter: nfnetlink_queue: fix OOB when mac header was cleared
Robert-Ionut Alexa <[email protected]>
soc: fsl: dpaa2-console: free buffer before returning from dpaa2_console_read
Geert Uytterhoeven <[email protected]>
auxdisplay: ht16k33: Fix frame buffer device blanking
Geert Uytterhoeven <[email protected]>
auxdisplay: ht16k33: Connect backlight to fbdev
Geert Uytterhoeven <[email protected]>
auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string
Alexey Gladkov <[email protected]>
Fix user namespace leak
Trond Myklebust <[email protected]>
NFS: Fix an Oops in pnfs_mark_request_commit()
Trond Myklebust <[email protected]>
NFS: Fix up commit deadlocks
Claudiu Beznea <[email protected]>
dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro
Dan Carpenter <[email protected]>
rtc: rv3032: fix error handling in rv3032_clkout_set_rate()
Christophe JAILLET <[email protected]>
remoteproc: Fix a memory leak in an error handling path in 'rproc_handle_vdev()'
Zev Weiss <[email protected]>
mtd: core: don't remove debugfs directory if device is in use
Kunihiko Hayashi <[email protected]>
PCI: uniphier: Serialize INTx masking/unmasking and fix the bit operation
Evgeny Novikov <[email protected]>
mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare()
Jia-Ju Bai <[email protected]>
fs: orangefs: fix error return code of orangefs_revalidate_lookup()
Trond Myklebust <[email protected]>
NFS: Fix deadlocks in nfs_scan_commit_list()
YueHaibing <[email protected]>
opp: Fix return in _opp_add_static_v2()
Pali Rohár <[email protected]>
PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridge
Marek Behún <[email protected]>
PCI: aardvark: Don't spam about PIO Response Status
Alex Xu (Hello71) <[email protected]>
drm/plane-helper: fix uninitialized variable reference
Baptiste Lepers <[email protected]>
pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_ds
Trond Myklebust <[email protected]>
NFS: Fix dentry verifier races
Kewei Xu <[email protected]>
i2c: mediatek: fixing the incorrect register offset
J. Bruce Fields <[email protected]>
nfsd: don't alloc under spinlock in rpc_parse_scope_id
Arnaud Pouliquen <[email protected]>
rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined
Tom Rix <[email protected]>
apparmor: fix error check
Hans de Goede <[email protected]>
power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
Geert Uytterhoeven <[email protected]>
mips: cm: Convert to bitfield API to fix out-of-bounds access
Xuan Zhuo <[email protected]>
virtio_ring: check desc == NULL when using indirect with packed
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Correct configuring of switch inversion from ts-inv
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Use device_property API instead of of_property
Lucas Tanure <[email protected]>
ASoC: cs42l42: Disable regulators if probe fails
Bixuan Cui <[email protected]>
powerpc/44x/fsp2: add missing of_node_put
Andrej Shadura <[email protected]>
HID: u2fzero: properly handle timeouts in usb_submit_urb
Andrej Shadura <[email protected]>
HID: u2fzero: clarify error check and length calculations
Claudiu Beznea <[email protected]>
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
Anssi Hannula <[email protected]>
serial: xilinx_uartps: Fix race condition causing stuck TX
Sandeep Maheswaram <[email protected]>
phy: qcom-snps: Correct the FSEL_MASK
Dan Carpenter <[email protected]>
phy: ti: gmii-sel: check of_get_address() for failure
Vladimir Zapolskiy <[email protected]>
phy: qcom-qusb2: Fix a memory leak on probe
Rahul Tanwar <[email protected]>
pinctrl: equilibrium: Fix function addition in multiple groups
Wan Jiabing <[email protected]>
soc: qcom: apr: Add of_node_put() before return
Guru Das Srinagesh <[email protected]>
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
Amelie Delaunay <[email protected]>
usb: dwc2: drd: reset current session before setting the new one
Amelie Delaunay <[email protected]>
usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabled
Amelie Delaunay <[email protected]>
usb: dwc2: drd: fix dwc2_force_mode call in dwc2_ovr_init
Stefan Agner <[email protected]>
serial: imx: fix detach/attach of serial console
Srinivas Kandagatla <[email protected]>
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
Can Guo <[email protected]>
scsi: ufs: Refactor ufshcd_setup_clocks() to remove skip_ref_clk
Nuno Sá <[email protected]>
iio: adis: do not disabe IRQs in 'adis_init()'
Randy Dunlap <[email protected]>
usb: typec: STUSB160X should select REGMAP_I2C
Bjorn Andersson <[email protected]>
soc: qcom: rpmhpd: Make power_on actually enable the domain
Lee Jones <[email protected]>
soc: qcom: rpmhpd: Provide some missing struct member descriptions
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Defer probe if request_threaded_irq() returns EPROBE_DEFER
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Correct some register default values
Olivier Moysan <[email protected]>
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
Olivier Moysan <[email protected]>
ARM: dts: stm32: fix SAI sub nodes register range
Marek Vasut <[email protected]>
ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
Geert Uytterhoeven <[email protected]>
pinctrl: renesas: checker: Fix off-by-one bug in drive register check
Vegard Nossum <[email protected]>
staging: ks7010: select CRYPTO_HASH/CRYPTO_MICHAEL_MIC
Nikita Yushchenko <[email protected]>
staging: most: dim2: do not double-register the same device
Randy Dunlap <[email protected]>
usb: musb: select GENERIC_PHY instead of depending on it
Leon Romanovsky <[email protected]>
RDMA/mlx4: Return missed an error if device doesn't support steering
Dan Carpenter <[email protected]>
scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()
Yang Yingliang <[email protected]>
power: supply: max17040: fix null-ptr-deref in max17040_probe()
Jakob Hauser <[email protected]>
power: supply: rt5033_battery: Change voltage values to µV
Dan Carpenter <[email protected]>
usb: gadget: hid: fix error code in do_config()
Andy Shevchenko <[email protected]>
serial: 8250_dw: Drop wrong use of ACPI_PTR()
Nathan Lynch <[email protected]>
powerpc: fix unbalanced node refcount in check_kvm_guest()
Michael Ellerman <[email protected]>
powerpc: Fix is_kvm_guest() / kvm_para_available()
Srikar Dronamraju <[email protected]>
powerpc: Reintroduce is_kvm_guest() as a fast-path check
Srikar Dronamraju <[email protected]>
powerpc: Rename is_kvm_guest() to check_kvm_guest()
Srikar Dronamraju <[email protected]>
powerpc: Refactor is_kvm_guest() declaration to new header
Christophe Leroy <[email protected]>
video: fbdev: chipsfb: use memset_io() instead of memset()
Clément Léger <[email protected]>
clk: at91: check pmc node status before registering syscore ops
Dongliang Mu <[email protected]>
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
Christophe JAILLET <[email protected]>
soc/tegra: Fix an error handling path in tegra_powergate_power_up()
Ranjani Sridharan <[email protected]>
ASoC: SOF: topology: do not power down primary core during topology removal
Andreas Kemnade <[email protected]>
arm: dts: omap3-gta04a4: accelerometer irq fix
Yang Yingliang <[email protected]>
driver core: Fix possible memory leak in device_link_add()
Igor Pylypiv <[email protected]>
scsi: pm80xx: Fix misleading log statement in pm8001_mpi_get_nvmd_resp()
Srinivas Kandagatla <[email protected]>
soundwire: debugfs: use controller id and link_id for debugfs
Takashi Iwai <[email protected]>
ALSA: hda: Use position buffer for SKL+ again
Imre Deak <[email protected]>
ALSA: hda: Fix hang during shutdown due to link reset
Imre Deak <[email protected]>
ALSA: hda: Release controller display power during shutdown/reboot
Takashi Iwai <[email protected]>
ALSA: hda: Reduce udelay() at SKL+ position reporting
Stephan Gerhold <[email protected]>
arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000
Geert Uytterhoeven <[email protected]>
arm64: dts: renesas: beacon: Fix Ethernet PHY mode
Stephan Gerhold <[email protected]>
arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clock
Dongliang Mu <[email protected]>
JFS: fix memleak in jfs_mount
Jackie Liu <[email protected]>
MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
Tong Zhang <[email protected]>
scsi: dc395: Fix error case unwinding
Peter Rosin <[email protected]>
ARM: dts: at91: tse850: the emac<->phy interface is rmii
Tony Lindgren <[email protected]>
bus: ti-sysc: Fix timekeeping_suspended warning on resume
Anand Moon <[email protected]>
arm64: dts: meson-g12b: Fix the pwm regulator supply properties
Anand Moon <[email protected]>
arm64: dts: meson-g12a: Fix the pwm regulator supply properties
Kishon Vijay Abraham I <[email protected]>
arm64: dts: ti: k3-j721e-main: Fix "bus-range" upto 256 bus number for PCIe
Kishon Vijay Abraham I <[email protected]>
arm64: dts: ti: k3-j721e-main: Fix "max-virtual-functions" in PCIe EP nodes
Selvin Xavier <[email protected]>
RDMA/bnxt_re: Fix query SRQ failure
Marijn Suijten <[email protected]>
ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY
Alex Bee <[email protected]>
arm64: dts: rockchip: Fix GPU register width for RK3328
Jackie Liu <[email protected]>
ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()
Christophe JAILLET <[email protected]>
clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling paths
Rafał Miłecki <[email protected]>
ARM: dts: BCM5301X: Fix memory nodes names
Junji Wei <[email protected]>
RDMA/rxe: Fix wrong port_cap_flags
Alexandru Ardelean <[email protected]>
iio: st_sensors: disable regulators after device unregistration
Andy Shevchenko <[email protected]>
iio: st_sensors: Call st_sensors_power_enable() from bus drivers
Frank Rowand <[email protected]>
of: unittest: fix EXPECT text for gpio hog errors
Alexei Starovoitov <[email protected]>
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
Alexei Starovoitov <[email protected]>
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
Dan Schatzberg <[email protected]>
cgroup: Fix rootcg cpu.stat guest double counting
Sukadev Bhattiprolu <[email protected]>
ibmvnic: Process crqs after enabling interrupts
Sukadev Bhattiprolu <[email protected]>
ibmvnic: don't stop queue in xmit
Jakub Kicinski <[email protected]>
udp6: allow SO_MARK ctrl msg to affect routing
Andrea Righi <[email protected]>
selftests/bpf: Fix fclose/pclose mismatch in test_progs
Daniel Jordan <[email protected]>
crypto: pcrypt - Delay write to padata->info
Russell King (Oracle) <[email protected]>
net: phylink: avoid mvneta warning when setting pause parameters
Shyam Sundar S K <[email protected]>
net: amd-xgbe: Toggle PLL settings during rate change
Kumar Kartikeya Dwivedi <[email protected]>
selftests/bpf: Fix fd cleanup in sk_lookup test
Lorenz Bauer <[email protected]>
selftests: bpf: Convert sk_lookup ctx access tests to PROG_TEST_RUN
Alex Deucher <[email protected]>
drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
Loic Poulain <[email protected]>
wcn36xx: Fix discarded frames due to wrong sequence number
Benjamin Li <[email protected]>
wcn36xx: add proper DMA memory barriers in rx path
Wang Hai <[email protected]>
libertas: Fix possible memory leak in probe and disconnect
Wang Hai <[email protected]>
libertas_tf: Fix possible memory leak in probe and disconnect
Janis Schoetterl-Glausch <[email protected]>
KVM: s390: Fix handle_sske page fault handling
Tiezhu Yang <[email protected]>
samples/kretprobes: Fix return value if register_kretprobe() failed
Lad Prabhakar <[email protected]>
spi: spi-rpc-if: Check return value of rpcif_sw_init()
Jon Maxwell <[email protected]>
tcp: don't free a FIN sk_buff in tcp_remove_empty_skb()
Ilya Leoshkevich <[email protected]>
libbpf: Fix endianness detection in BPF_CORE_READ_BITFIELD_PROBED()
Mark Brown <[email protected]>
tpm_tis_spi: Add missing SPI ID
Hao Wu <[email protected]>
tpm: fix Atmel TPM crash caused by too frequent queries
Michael Schmitz <[email protected]>
block: ataflop: more blk-mq refactoring fixes
Dan Carpenter <[email protected]>
ataflop: potential out of bounds in do_format()
Christoph Hellwig <[email protected]>
ataflop: use a separate gendisk for each media format
Mark Rutland <[email protected]>
irq: mips: avoid nested irq_enter()
Claudio Imbrenda <[email protected]>
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
Claudio Imbrenda <[email protected]>
KVM: s390: pv: avoid double free of sida page
David Hildenbrand <[email protected]>
s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()
Andrii Nakryiko <[email protected]>
libbpf: Fix BTF header parsing checks
Andrii Nakryiko <[email protected]>
libbpf: Fix overflow in BTF sanity checks
Andrii Nakryiko <[email protected]>
libbpf: Allow loading empty BTFs
Andrii Nakryiko <[email protected]>
libbpf: Fix BTF data layout checks and allow empty BTF
Quentin Monnet <[email protected]>
bpftool: Avoid leaking the JSON writer prepared for program metadata
Jim Mattson <[email protected]>
KVM: selftests: Fix nested SVM tests when built with clang
Ricardo Koller <[email protected]>
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
Tetsuo Handa <[email protected]>
smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
Jessica Zhang <[email protected]>
drm/msm: Fix potential NULL dereference in DPU SSPP
Joerg Roedel <[email protected]>
x86/sev: Fix stack type check in vc_switch_off_ist()
Kees Cook <[email protected]>
clocksource/drivers/timer-ti-dm: Select TIMER_OF
Anders Roxell <[email protected]>
PM: hibernate: fix sparse warnings
Max Gurtovoy <[email protected]>
nvme-rdma: fix error code in nvme_rdma_setup_ctrl
Stefan Agner <[email protected]>
phy: micrel: ksz8041nl: do not use power down mode
Tim Gardner <[email protected]>
net: enetc: unmap DMA in enetc_send_cmd()
Jonas Dreßler <[email protected]>
mwifiex: Send DELBA requests according to spec
Ziyang Xuan <[email protected]>
rsi: stop thread firstly in rsi_91x_init() error handling
Shayne Chen <[email protected]>
mt76: mt7915: fix muar_idx in mt7915_mcu_alloc_sta_req()
Shayne Chen <[email protected]>
mt76: mt7915: fix sta_rec_wtbl tag len
Lorenzo Bianconi <[email protected]>
mt76: mt7915: fix possible infinite loop release semaphore
Lorenzo Bianconi <[email protected]>
mt76: mt76x02: fix endianness warnings in mt76x02_mac.c
Lorenzo Bianconi <[email protected]>
mt76: mt7615: fix endianness warning in mt7615_mac_write_txwi
Nathan Chancellor <[email protected]>
platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning
Michael Schmitz <[email protected]>
block: ataflop: fix breakage introduced at blk-mq refactoring
Christophe JAILLET <[email protected]>
mmc: mxs-mmc: disable regulator on error and in the remove function
Sean Young <[email protected]>
media: ir_toy: assignment to be16 should be of correct type
Jakub Kicinski <[email protected]>
net: stream: don't purge sk_error_queue in sk_stream_kill_queues()
Dan Carpenter <[email protected]>
drm/msm: uninitialized variable in msm_gem_import()
Dan Carpenter <[email protected]>
drm/msm: potential error pointer dereference in init()
Eric Dumazet <[email protected]>
tcp: switch orphan_count to bare per-cpu counters
Zhang Qiao <[email protected]>
kernel/sched: Fix sched_fork() access an invalid sched_task_group
Sven Eckelmann <[email protected]>
ath10k: fix max antenna gain unit
Zev Weiss <[email protected]>
hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeff
Yang Yingliang <[email protected]>
hwmon: Fix possible memleak in __hwmon_device_register()
Daniel Borkmann <[email protected]>
net, neigh: Fix NTF_EXT_LEARNED in combination with NTF_USE
Dan Carpenter <[email protected]>
memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host()
Arnd Bergmann <[email protected]>
memstick: avoid out-of-range warning
Tony Lindgren <[email protected]>
mmc: sdhci-omap: Fix context restore
Tony Lindgren <[email protected]>
mmc: sdhci-omap: Fix NULL pointer exception if regulator is not configured
John Fraker <[email protected]>
gve: Recover from queue stall due to missed IRQ
Dan Carpenter <[email protected]>
b43: fix a lower bounds test
Dan Carpenter <[email protected]>
b43legacy: fix a lower bounds test
Markus Schneider-Pargmann <[email protected]>
hwrng: mtk - Force runtime pm ops for sleep ops
Giovanni Cabiddu <[email protected]>
crypto: qat - disregard spurious PFVF interrupts
Giovanni Cabiddu <[email protected]>
crypto: qat - detect PFVF collision after ACK
Evgeny Novikov <[email protected]>
media: dvb-frontends: mn88443x: Handle errors of clk_prepare_enable()
Pablo Neira Ayuso <[email protected]>
netfilter: nft_dynset: relax superfluous check on set updates
Peter Zijlstra <[email protected]>
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
Yazen Ghannam <[email protected]>
EDAC/amd64: Handle three rank interleaving mode
Vincent Donnefort <[email protected]>
PM: EM: Fix inefficient states detection
Linus Lüssing <[email protected]>
ath9k: Fix potential interrupt storm on queue reset
Colin Ian King <[email protected]>
media: em28xx: Don't use ops->suspend if it is NULL
Anel Orazgaliyeva <[email protected]>
cpuidle: Fix kobject memory leaks in error paths
Arnd Bergmann <[email protected]>
crypto: ecc - fix CRYPTO_DEFAULT_RNG dependency
Punit Agrawal <[email protected]>
kprobes: Do not use local variable when creating debugfs file
Colin Ian King <[email protected]>
media: cx23885: Fix snd_card_free call on null card pointer
Kees Cook <[email protected]>
media: tm6000: Avoid card name truncation
Kees Cook <[email protected]>
media: si470x: Avoid card name truncation
Kees Cook <[email protected]>
media: radio-wl1273: Avoid card name truncation
Randy Dunlap <[email protected]>
media: i2c: ths8200 needs V4L2_ASYNC
Christophe JAILLET <[email protected]>
media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()'
Tom Rix <[email protected]>
media: TDA1997x: handle short reads of hdmi info frame.
Ricardo Ribalda <[email protected]>
media: v4l2-ioctl: S_CTRL output the right value
Pavel Skripkin <[email protected]>
media: dvb-usb: fix ununit-value in az6027_rc_query
Colin Ian King <[email protected]>
media: cxd2880-spi: Fix a null pointer dereference on error handling path
Pavel Skripkin <[email protected]>
media: em28xx: add missing em28xx_close_extension
Arnd Bergmann <[email protected]>
drm/amdgpu: fix warning for overflow check
Sudarshan Rajagopalan <[email protected]>
arm64: mm: update max_pfn after memory hotplug
Matthew Auld <[email protected]>
drm/ttm: stop calling tt_swapin in vm_access
Fabio Estevam <[email protected]>
ath10k: sdio: Add missing BH locking around napi_schdule()
Loic Poulain <[email protected]>
ath10k: Fix missing frame timestamp for beacon/probe-resp
Baochen Qiang <[email protected]>
ath11k: Fix memory leak in ath11k_qmi_driver_event_work
Pradeep Kumar Chitrapu <[email protected]>
ath11k: fix packet drops due to incorrect 6 GHz freq value in rx status
Sriram R <[email protected]>
ath11k: Avoid race during regd updates
Dan Carpenter <[email protected]>
ath11k: fix some sleeping in atomic bugs
Linus Walleij <[email protected]>
net: dsa: rtl8366rb: Fix off-by-one bug
Jiasheng Jiang <[email protected]>
rxrpc: Fix _usecs_to_jiffies() by using usecs_to_jiffies()
Michael Walle <[email protected]>
crypto: caam - disable pkc for non-E SoCs
Dinghao Liu <[email protected]>
Bluetooth: btmtkuart: fix a memleak in mtk_hci_wmt_sync
Ajay Singh <[email protected]>
wilc1000: fix possible memory leak in cfg_scan_result()
Bryan O'Donoghue <[email protected]>
wcn36xx: Fix Antenna Diversity Switching
Waiman Long <[email protected]>
cgroup: Make rebind_subsystems() disable v2 controllers all at once
Yajun Deng <[email protected]>
net: net_namespace: Fix undefined member in key_remove_domain()
Sebastian Andrzej Siewior <[email protected]>
lockdep: Let lock_is_held_type() detect recursive read as read
liuyuntao <[email protected]>
virtio-gpu: fix possible memory allocation failure
Iago Toral Quiroga <[email protected]>
drm/v3d: fix wait for TMU write combiner flush
Peter Zijlstra <[email protected]>
objtool: Fix static_call list generation
Peter Zijlstra <[email protected]>
x86/xen: Mark cpu_bringup_and_idle() as dead_end_function
Josh Poimboeuf <[email protected]>
objtool: Add xen_start_kernel() to noreturn list
Aleksander Jan Bajkowski <[email protected]>
MIPS: lantiq: dma: fix burst length for DEU
Neeraj Upadhyay <[email protected]>
rcu: Fix existing exp request check in sync_sched_exp_online_cleanup()
Desmond Cheong Zhi Xi <[email protected]>
Bluetooth: fix init and cleanup of sco_conn.timeout_work
Andrii Nakryiko <[email protected]>
selftests/bpf: Fix strobemeta selftest regression
Pablo Neira Ayuso <[email protected]>
netfilter: conntrack: set on IPS_ASSURED if flows enters internal stream state
Sven Schnelle <[email protected]>
parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
Sven Schnelle <[email protected]>
parisc/unwind: fix unwinder when CONFIG_64BIT is enabled
Gao Xiang <[email protected]>
erofs: don't trigger WARN() when decompression fails
Helge Deller <[email protected]>
task_stack: Fix end_of_stack() for architectures with upwards-growing stack
Sven Schnelle <[email protected]>
parisc: fix warning in flush_tlb_all
Shuah Khan <[email protected]>
selftests/core: fix conflicting types compile error for close_range()
Anson Jacob <[email protected]>
drm/amd/display: dcn20_resource_construct reduce scope of FPU enabled
Vitaly Kuznetsov <[email protected]>
x86/hyperv: Protect set_hv_tscchange_cb() against getting preempted
Loic Poulain <[email protected]>
wcn36xx: Correct band/freq reporting on RX
Yang Yingliang <[email protected]>
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
Josef Bacik <[email protected]>
btrfs: do not take the uuid_mutex in btrfs_rm_device
Sidong Yang <[email protected]>
btrfs: reflink: initialize return value to 0 in btrfs_extent_same()
Stefan Schaeckeler <[email protected]>
ACPI: AC: Quirk GK45 to skip reading _PSR
Eric Dumazet <[email protected]>
net: annotate data-race in neigh_output()
Florian Westphal <[email protected]>
vrf: run conntrack only in context of lower/physdev for locally generated packets
Arnd Bergmann <[email protected]>
ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
Andreas Gruenbacher <[email protected]>
gfs2: Fix glock_hash_walk bugs
Andreas Gruenbacher <[email protected]>
gfs2: Cancel remote delete work asynchronously
Vladimir Oltean <[email protected]>
net: dsa: lantiq_gswip: serialize access to the PCE table
Stephen Suryaputra <[email protected]>
gre/sit: Don't generate link-local addr if addr_gen_mode is IN6_ADDR_GEN_MODE_NONE
Masami Hiramatsu <[email protected]>
ARM: clang: Do not rely on lr register for stacktrace
Tetsuo Handa <[email protected]>
smackfs: use __GFP_NOFAIL for smk_cipso_doi()
Johannes Berg <[email protected]>
iwlwifi: mvm: disable RX-diversity in powersave
Jiri Olsa <[email protected]>
selftests/bpf: Fix perf_buffer test on system with offline cpus
Shuah Khan <[email protected]>
selftests: kvm: fix mismatched fclose() after popen()
Ye Bin <[email protected]>
PM: hibernate: Get block device exclusively in swsusp_check()
Hannes Reinecke <[email protected]>
nvme: drop scan_lock and always kick requeue list when removing namespaces
Israel Rukshin <[email protected]>
nvmet-tcp: fix use-after-free when a port is removed
Israel Rukshin <[email protected]>
nvmet-rdma: fix use-after-free when a port is removed
Israel Rukshin <[email protected]>
nvmet: fix use-after-free when a port is removed
Michael Tretter <[email protected]>
media: allegro: ignore interrupt if mailbox is not initialized
Jens Axboe <[email protected]>
block: remove inaccurate requeue check
Zheyu Ma <[email protected]>
mwl8k: Fix use-after-free in mwl8k_fw_state_machine()
Ryder Lee <[email protected]>
mt76: mt7915: fix an off-by-one bound check
Kalesh Singh <[email protected]>
tracing/cfi: Fix cmp_entries_* functions signature mismatch
Menglong Dong <[email protected]>
workqueue: make sysfs of unbound kworker cpumask more clever
Lasse Collin <[email protected]>
lib/xz: Validate the value before assigning it to an enum variable
Lasse Collin <[email protected]>
lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression
Zheyu Ma <[email protected]>
memstick: r592: Fix a UAF bug when removing the driver
Xiao Ni <[email protected]>
md: update superblock after changing rdev flags in state_store
Jens Axboe <[email protected]>
block: bump max plugged deferred size from 16 to 32
Tim Gardner <[email protected]>
drm/msm: prevent NULL dereference in msm_gpu_crashstate_capture()
Kees Cook <[email protected]>
leaking_addresses: Always print a trailing newline
Matthias Schiffer <[email protected]>
net: phy: micrel: make *-skew-ps check more lenient
Yifan Zhang <[email protected]>
drm/amdkfd: fix resume error when iommu disabled in Picasso
André Almeida <[email protected]>
ACPI: battery: Accept charges over the design capacity as full
Andreas Gruenbacher <[email protected]>
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
Xin Xiong <[email protected]>
mmc: moxart: Fix reference count leaks in moxart_probe
Tuo Li <[email protected]>
ath: dfs_pattern_detector: Fix possible null-pointer dereference in channel_detector_create()
Steven Rostedt (VMware) <[email protected]>
tracefs: Have tracefs directories not set OTH permission bits by default
Antoine Tenart <[email protected]>
net-sysfs: try not to restart the syscall if it will fail eventually
Anant Thazhemadam <[email protected]>
media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte()
Ricardo Ribalda <[email protected]>
media: ipu3-imgu: VIDIOC_QUERYCAP: Fix bus_info
Ricardo Ribalda <[email protected]>
media: ipu3-imgu: imgu_fmt: Handle properly try
Rafael J. Wysocki <[email protected]>
ACPICA: Avoid evaluating methods too early during system resume
Josh Don <[email protected]>
fs/proc/uptime.c: Fix idle time reporting in /proc/uptime
Corey Minyard <[email protected]>
ipmi: Disable some operations during a panic
Nadezda Lutovinova <[email protected]>
media: rcar-csi2: Add checking to rcsi2_start_receiver()
Hans de Goede <[email protected]>
brcmfmac: Add DMI nvram filename quirk for Cyberbook T116 tablet
Zong-Zhe Yang <[email protected]>
rtw88: fix RX clock gate setting while fifo dump
Randy Dunlap <[email protected]>
ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
Rajat Asthana <[email protected]>
media: mceusb: return without resubmitting URB in case of -EPROTO error.
Martin Kepplinger <[email protected]>
media: imx: set a media_device bus_info string
Nadezda Lutovinova <[email protected]>
media: s5p-mfc: Add checking to s5p_mfc_probe().
Tuo Li <[email protected]>
media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe()
Ricardo Ribalda <[email protected]>
media: uvcvideo: Set unique vdev name based in type
Ricardo Ribalda <[email protected]>
media: uvcvideo: Return -EIO for control errors
Ricardo Ribalda <[email protected]>
media: uvcvideo: Set capability in s_param
Dmitriy Ulitin <[email protected]>
media: stm32: Potential NULL pointer dereference in dcmi_irq_thread()
Evgeny Novikov <[email protected]>
media: atomisp: Fix error handling in probe
Zheyu Ma <[email protected]>
media: netup_unidvb: handle interrupt properly according to the firmware
Dirk Bender <[email protected]>
media: mt9p031: Fix corrupted frame after restarting stream
Alagu Sankar <[email protected]>
ath10k: high latency fixes for beacon buffer
Baochen Qiang <[email protected]>
ath11k: Change DMA_FROM_DEVICE to DMA_TO_DEVICE when map reinjected packets
Wen Gong <[email protected]>
ath11k: add handler for scan event WMI_SCAN_EVENT_DEQUEUED
Sriram R <[email protected]>
ath11k: Avoid reg rules update during firmware recovery
Andrey Grodzovsky <[email protected]>
drm/amdgpu: Fix MMIO access page fault
Eric Biggers <[email protected]>
fscrypt: allow 256-bit master keys with AES-256-XTS
Jonas Dreßler <[email protected]>
mwifiex: Properly initialize private structure on interface type changes
Jonas Dreßler <[email protected]>
mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type
Peter Zijlstra <[email protected]>
x86: Increase exception stack sizes
Seevalamuthu Mariappan <[email protected]>
ath11k: Align bss_chan_info structure with firmware
Pawan Gupta <[email protected]>
smackfs: Fix use-after-free in netlbl_catmap_walk()
Paul E. McKenney <[email protected]>
rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
Jakub Kicinski <[email protected]>
net: sched: update default qdisc visibility after Tx queue cnt changes
Peter Zijlstra <[email protected]>
locking/lockdep: Avoid RCU-induced noinstr fail
Aleksander Jan Bajkowski <[email protected]>
MIPS: lantiq: dma: reset correct number of channel
Aleksander Jan Bajkowski <[email protected]>
MIPS: lantiq: dma: add small delay after reset
Barnabás Pőcze <[email protected]>
platform/x86: wmi: do not fail if disabling fails
Scott Wood <[email protected]>
rcutorture: Avoid problematic critical section nesting on PREEMPT_RT
Simon Ser <[email protected]>
drm/panel-orientation-quirks: add Valve Steam Deck
Wang ShaoBo <[email protected]>
Bluetooth: fix use-after-free error in lock_sock_nested()
Takashi Iwai <[email protected]>
Bluetooth: sco: Fix lock_sock() blockage by memcpy_from_msg()
Hans de Goede <[email protected]>
drm: panel-orientation-quirks: Add quirk for the Samsung Galaxy Book 10.6
Hans de Goede <[email protected]>
drm: panel-orientation-quirks: Add quirk for KD Kurio Smart C15200 2-in-1
Hans de Goede <[email protected]>
drm: panel-orientation-quirks: Update the Lenovo Ideapad D330 quirk (v2)
Charan Teja Reddy <[email protected]>
dma-buf: WARN on dmabuf release with pending attachments
Sebastian Krzyszkowiak <[email protected]>
power: supply: max17042_battery: Clear status bits in interrupt handler
Johan Hovold <[email protected]>
USB: chipidea: fix interrupt deadlock
Johan Hovold <[email protected]>
USB: iowarrior: fix control-message timeouts
Johan Hovold <[email protected]>
most: fix control-message timeouts
Johan Hovold <[email protected]>
serial: 8250: fix racy uartclk update
Wang Hai <[email protected]>
USB: serial: keyspan: fix memleak on probe errors
Nuno Sá <[email protected]>
iio: ad5770r: make devicetree property reading consistent
Pekka Korpinen <[email protected]>
iio: dac: ad5446: Fix ad5622_write() return value
Tao Zhang <[email protected]>
coresight: cti: Correct the parameter for pm_runtime_put
Yang Yingliang <[email protected]>
pinctrl: core: fix possible memory leak in pinctrl_enable()
Zhang Yi <[email protected]>
quota: correct error number in free_dqentry()
Zhang Yi <[email protected]>
quota: check block number when reading the block in quota file
Pali Rohár <[email protected]>
PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge
Pali Rohár <[email protected]>
PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge
Pali Rohár <[email protected]>
PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridge
Pali Rohár <[email protected]>
PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridge
Marek Behún <[email protected]>
PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG
Marek Behún <[email protected]>
PCI: aardvark: Fix return value of MSI domain .alloc() method
Pali Rohár <[email protected]>
PCI: aardvark: Fix configuring Reference clock
Pali Rohár <[email protected]>
PCI: aardvark: Fix reporting Data Link Layer Link Active
Pali Rohár <[email protected]>
PCI: aardvark: Do not unmask unused interrupts
Pali Rohár <[email protected]>
PCI: aardvark: Fix checking for link up via LTSSM state
Pali Rohár <[email protected]>
PCI: aardvark: Do not clear status bits of masked interrupts
Li Chen <[email protected]>
PCI: cadence: Add cdns_plat_pcie_probe() missing return
Marek Behún <[email protected]>
PCI: pci-bridge-emul: Fix emulation of W1C bits
yangerkun <[email protected]>
ovl: fix use after free in struct ovl_aio_req
Juergen Gross <[email protected]>
xen/balloon: add late_initcall_sync() for initial ballooning done
Pavel Skripkin <[email protected]>
ALSA: mixer: fix deadlock in snd_mixer_oss_set_volume
Takashi Iwai <[email protected]>
ALSA: mixer: oss: Fix racy access to slots
Arnd Bergmann <[email protected]>
ifb: fix building without CONFIG_NET_CLS_ACT
Pali Rohár <[email protected]>
serial: core: Fix initializing and restoring termios speed
Steven Rostedt (VMware) <[email protected]>
ring-buffer: Protect ring_buffer_reset() from reentrancy
Xiaoming Ni <[email protected]>
powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be found
Zhang Changzhong <[email protected]>
can: j1939: j1939_can_recv(): ignore messages with invalid source address
Zhang Changzhong <[email protected]>
can: j1939: j1939_tp_cmd_recv(): ignore abort message in the BAM transport
Sean Christopherson <[email protected]>
KVM: nVMX: Query current VMCS when determining if MSR bitmaps are in use
Mark Rutland <[email protected]>
KVM: arm64: Extract ESR_ELx.EC only
Henrik Grimler <[email protected]>
power: supply: max17042_battery: use VFSOC for capacity when no rsns
Sebastian Krzyszkowiak <[email protected]>
power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
Miquel Raynal <[email protected]>
mtd: rawnand: socrates: Keep the driver compatible with on-die ECC engines
Meng Li <[email protected]>
soc: fsl: dpio: use the combined functions to protect critical zone
Meng Li <[email protected]>
soc: fsl: dpio: replace smp_processor_id with raw_smp_processor_id
Eric W. Biederman <[email protected]>
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
Wolfram Sang <[email protected]>
memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode
Eric W. Biederman <[email protected]>
signal: Remove the bogus sigkill_pending in ptrace_stop
Alok Prasad <[email protected]>
RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
Kan Liang <[email protected]>
perf/x86/intel/uncore: Fix Intel ICX IIO event constraints
Kan Liang <[email protected]>
perf/x86/intel/uncore: Support extra IMC channel on Ice Lake server
Marek Vasut <[email protected]>
rsi: Fix module dev_oper_mode parameter description
Martin Fuzzey <[email protected]>
rsi: fix rate mask set leading to P2P failure
Martin Fuzzey <[email protected]>
rsi: fix key enabled check causing unwanted encryption for vap_id > 0
Martin Fuzzey <[email protected]>
rsi: fix occasional initialisation failure with BT coex
Benjamin Li <[email protected]>
wcn36xx: handle connection loss indication
Reimar Döffinger <[email protected]>
libata: fix checking of DMA state
Jonas Dreßler <[email protected]>
mwifiex: Try waking the firmware until we get an interrupt
Jonas Dreßler <[email protected]>
mwifiex: Read a PCI register after writing the TX ring write pointer
Rafael J. Wysocki <[email protected]>
PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions
Loic Poulain <[email protected]>
wcn36xx: Fix (QoS) null data frame bitrate/modulation
Loic Poulain <[email protected]>
wcn36xx: Fix tx_status mechanism
Loic Poulain <[email protected]>
wcn36xx: Fix HT40 capability for 2Ghz band
Lukas Wunner <[email protected]>
ifb: Depend on netfilter alternatively to tc
Austin Kim <[email protected]>
evm: mark evm_fixmode as __ro_after_init
Johan Hovold <[email protected]>
rtl8187: fix control-message timeouts
Ingmar Klein <[email protected]>
PCI: Mark Atheros QCA6174 to avoid bus reset
Johan Hovold <[email protected]>
ath10k: fix division by zero in send path
Johan Hovold <[email protected]>
ath10k: fix control-message timeout
Johan Hovold <[email protected]>
ath6kl: fix control-message timeout
Johan Hovold <[email protected]>
ath6kl: fix division by zero in send path
Johan Hovold <[email protected]>
mwifiex: fix division by zero in fw download path
Eric Badger <[email protected]>
EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
Krzysztof Kozlowski <[email protected]>
regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
Krzysztof Kozlowski <[email protected]>
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
Zev Weiss <[email protected]>
hwmon: (pmbus/lm25066) Add offset coefficients
Ondrej Mosnacek <[email protected]>
selinux: fix race condition when computing ocontext SIDs
Masami Hiramatsu <[email protected]>
ia64: kprobes: Fix to pass correct trampoline address to the handler
Andreas Gruenbacher <[email protected]>
powerpc/kvm: Fix kvm_use_magic_page
Sean Christopherson <[email protected]>
KVM: VMX: Unregister posted interrupt wakeup handler on hardware unsetup
Anand Jain <[email protected]>
btrfs: call btrfs_check_rw_degradable only if there is a missing device
Filipe Manana <[email protected]>
btrfs: fix lost error handling when replaying directory deletes
Li Zhang <[email protected]>
btrfs: clear MISSING device status bit in btrfs_close_one_device
Christoph Hellwig <[email protected]>
rds: stop using dmapool
Wen Gu <[email protected]>
net/smc: Correct spelling mistake to TCPF_SYN_RECV
Tony Lu <[email protected]>
net/smc: Fix smc_link->llc_testlink_time overflow
Yu Xiao <[email protected]>
nfp: bpf: relax prog rejection for mtu check through max_pkt_offset
Dongli Zhang <[email protected]>
vmxnet3: do not stop tx queues after netif_device_detach()
Janghyub Seo <[email protected]>
r8169: Add device 10ec:8162 to driver r8169
Amit Engel <[email protected]>
nvmet-tcp: fix header digest verification
Naohiro Aota <[email protected]>
block: schedule queue restart after BLK_STS_ZONE_RESOURCE
Mario <[email protected]>
drm: panel-orientation-quirks: Add quirk for GPD Win3
Walter Stoll <[email protected]>
watchdog: Fix OMAP watchdog early handling
Cyril Strejc <[email protected]>
net: multicast: calculate csum of looped-back and forwarded packets
Thomas Perrot <[email protected]>
spi: spl022: fix Microwire full duplex mode
Maurizio Lombardi <[email protected]>
nvmet-tcp: fix a memory leak when releasing a queue
Dongli Zhang <[email protected]>
xen/netfront: stop tx queues during live migration
Asmaa Mnebhi <[email protected]>
gpio: mlxbf2.c: Add check for bgpio_init failure
Lorenz Bauer <[email protected]>
bpf: Prevent increasing bpf_jit_limit above max
Lorenz Bauer <[email protected]>
bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT
Florian Westphal <[email protected]>
fcnal-test: kill hanging ping/nettest binaries on cleanup
Bryant Mairs <[email protected]>
drm: panel-orientation-quirks: Add quirk for Aya Neo 2021
Randy Dunlap <[email protected]>
mmc: winbond: don't build on M68K
Paweł Anikiel <[email protected]>
reset: socfpga: add empty driver allowing consumers to probe
Mikko Perttunen <[email protected]>
reset: tegra-bpmp: Handle errors in BPMP response
Bastien Roucariès <[email protected]>
ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
Arnd Bergmann <[email protected]>
hyperv/vmbus: include linux/bitops.h
Erik Ekman <[email protected]>
sfc: Don't use netif_info before net_device setup
Erik Ekman <[email protected]>
sfc: Export fibre-specific supported link modes
Zheyu Ma <[email protected]>
cavium: Fix return values of the probe function
Zheyu Ma <[email protected]>
mISDN: Fix return values of the probe function
Dmitry Bogdanov <[email protected]>
scsi: qla2xxx: Fix unmap of already freed sgl
Zheyu Ma <[email protected]>
scsi: qla2xxx: Return -ENOMEM if kzalloc() fails
Zheyu Ma <[email protected]>
cavium: Return negative value when pci_alloc_irq_vectors() fails
Davide Baldo <[email protected]>
ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers
Yang Yingliang <[email protected]>
ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked()
Sean Christopherson <[email protected]>
x86/irq: Ensure PI wakeup handler is unregistered before module unload
Jane Malalane <[email protected]>
x86/cpu: Fix migration safety with X86_BUG_NULL_SEL
Tom Lendacky <[email protected]>
x86/sme: Use #define USE_EARLY_PGTABLE_L5 in mem_encrypt_identity.c
Miklos Szeredi <[email protected]>
fuse: fix page stealing
yangerkun <[email protected]>
ext4: refresh the ext4_ext_path struct after dropping i_data_sem.
yangerkun <[email protected]>
ext4: ensure enough credits in ext4_ext_shift_path_extents
Shaoying Xu <[email protected]>
ext4: fix lazy initialization next schedule time computation in more granular unit
Takashi Iwai <[email protected]>
ALSA: timer: Unconditionally unlink slave instances, too
Wang Wensheng <[email protected]>
ALSA: timer: Fix use-after-free problem
Austin Kim <[email protected]>
ALSA: synth: missing check for possible NULL after the call to kstrdup
Takashi Iwai <[email protected]>
ALSA: hda: Free card instance properly at probe errors
Alexander Tsoy <[email protected]>
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
Jason Ormes <[email protected]>
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
Johan Hovold <[email protected]>
ALSA: line6: fix control and interrupt message timeouts
Johan Hovold <[email protected]>
ALSA: 6fire: fix control and bulk message timeouts
Johan Hovold <[email protected]>
ALSA: ua101: fix division by zero at probe
Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Add quirk for HP EliteBook 840 G7 mute LED
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Add quirk for ASUS UX550VE
Jaroslav Kysela <[email protected]>
ALSA: hda/realtek: Add a quirk for Acer Spin SP513-54N
Jeremy Soller <[email protected]>
ALSA: hda/realtek: Headset fixup for Clevo NH77HJQ
Tim Crawford <[email protected]>
ALSA: hda/realtek: Add quirk for Clevo PC70HS
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Add a quirk for HP OMEN 15 mute LED
Johnathon Clark <[email protected]>
ALSA: hda/realtek: Fix mic mute LED for the HP Spectre x360 14
Ricardo Ribalda <[email protected]>
media: v4l2-ioctl: Fix check_ext_ctrls
Sean Young <[email protected]>
media: ir-kbd-i2c: improve responsiveness of hauppauge zilog receivers
Chen-Yu Tsai <[email protected]>
media: rkvdec: Support dynamic resolution changes
Sean Young <[email protected]>
media: ite-cir: IR receiver stop working after receive overflow
Chen-Yu Tsai <[email protected]>
media: rkvdec: Do not override sizeimage for output format
Tang Bin <[email protected]>
crypto: s5p-sss - Add error handling in s5p_aes_probe()
jing yangyang <[email protected]>
firmware/psci: fix application of sizeof to pointer
Dan Carpenter <[email protected]>
tpm: Check for integer overflow in tpm2_map_response_body()
Helge Deller <[email protected]>
parisc: Fix ptrace check on syscall return
Helge Deller <[email protected]>
parisc: Fix set_fixmap() on PA1.x CPUs
Sungjong Seo <[email protected]>
exfat: fix incorrect loading of i_blocks for large files
Christian Löhle <[email protected]>
mmc: dw_mmc: Dont wait for DRTO on Write RSP error
Derong Liu <[email protected]>
mmc: mtk-sd: Add wait dma stop done flow
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix use after free in eh_abort path
Arun Easi <[email protected]>
scsi: qla2xxx: Fix kernel crash when accessing port_speed sysfs file
Tadeusz Struk <[email protected]>
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
Jan Kara <[email protected]>
ocfs2: fix data corruption on truncate
Damien Le Moal <[email protected]>
libata: fix read log timeout value
Takashi Iwai <[email protected]>
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Phoenix Huang <[email protected]>
Input: elantench - fix misreporting trackpoint coordinates
Johan Hovold <[email protected]>
Input: iforce - fix control-message timeout
Todd Kjos <[email protected]>
binder: use cred instead of task for getsecid
Todd Kjos <[email protected]>
binder: use cred instead of task for selinux checks
Todd Kjos <[email protected]>
binder: use euid from cred instead of using task
Nehal Bakulchandra Shah <[email protected]>
usb: xhci: Enable runtime-pm by default on AMD Yellow Carp platform
Mathias Nyman <[email protected]>
xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 7 +
.../bindings/regulator/samsung,s5m8767.txt | 23 +-
Documentation/filesystems/fscrypt.rst | 10 +-
Makefile | 4 +-
arch/arm/Makefile | 22 +-
arch/arm/boot/dts/at91-tse850-3.dts | 2 +-
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 2 +-
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 +-
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +-
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +-
arch/arm/boot/dts/bcm94708.dts | 2 +-
arch/arm/boot/dts/bcm94709.dts | 2 +-
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
arch/arm/boot/dts/qcom-msm8974.dtsi | 4 +-
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 8 +-
arch/arm/boot/dts/stm32mp151.dtsi | 16 +-
arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
arch/arm/kernel/stacktrace.c | 3 +-
arch/arm/mach-s3c/irq-s3c24xx.c | 22 +-
arch/arm/mm/Kconfig | 2 +-
arch/arm/mm/mmu.c | 4 +-
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
.../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 4 +-
.../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 4 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 +-
arch/arm64/boot/dts/qcom/pm8916.dtsi | 1 -
.../arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 1 +
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 16 +-
arch/arm64/include/asm/esr.h | 1 +
arch/arm64/include/asm/pgtable.h | 12 +-
arch/arm64/kvm/hyp/hyp-entry.S | 2 +-
arch/arm64/kvm/hyp/nvhe/host.S | 2 +-
arch/arm64/mm/mmu.c | 5 +
arch/arm64/net/bpf_jit_comp.c | 5 +
arch/ia64/Kconfig.debug | 2 +-
arch/ia64/kernel/kprobes.c | 9 +-
arch/m68k/Kconfig.machine | 1 +
arch/mips/Kconfig | 1 +
arch/mips/include/asm/cmpxchg.h | 5 +-
arch/mips/include/asm/mips-cm.h | 12 +-
arch/mips/kernel/mips-cm.c | 21 +-
arch/mips/kernel/r2300_fpu.S | 4 +-
arch/mips/kernel/syscall.c | 9 -
arch/mips/lantiq/xway/dma.c | 23 +-
arch/openrisc/kernel/dma.c | 4 +-
arch/openrisc/kernel/smp.c | 6 +-
arch/parisc/kernel/entry.S | 2 +-
arch/parisc/kernel/smp.c | 19 +-
arch/parisc/kernel/unwind.c | 21 +-
arch/parisc/kernel/vmlinux.lds.S | 3 +-
arch/parisc/mm/fixmap.c | 5 +-
arch/parisc/mm/init.c | 4 +-
arch/powerpc/include/asm/code-patching.h | 1 +
arch/powerpc/include/asm/firmware.h | 6 -
arch/powerpc/include/asm/kvm_guest.h | 25 ++
arch/powerpc/include/asm/kvm_para.h | 2 +-
arch/powerpc/include/asm/security_features.h | 5 +
arch/powerpc/kernel/firmware.c | 12 +-
arch/powerpc/kernel/kvm.c | 2 +-
arch/powerpc/kernel/security.c | 5 +
arch/powerpc/lib/code-patching.c | 7 +-
arch/powerpc/net/bpf_jit.h | 33 ++-
arch/powerpc/net/bpf_jit64.h | 8 +-
arch/powerpc/net/bpf_jit_comp64.c | 64 +++++-
arch/powerpc/platforms/44x/fsp2.c | 2 +
arch/powerpc/platforms/85xx/Makefile | 4 +-
arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c | 7 +-
arch/powerpc/platforms/85xx/smp.c | 12 +-
arch/powerpc/platforms/powernv/opal-prd.c | 12 +-
arch/powerpc/platforms/pseries/smp.c | 3 +
arch/s390/kvm/priv.c | 2 +
arch/s390/kvm/pv.c | 21 +-
arch/s390/mm/gmap.c | 5 +-
arch/sh/kernel/cpu/fpu.c | 10 +-
arch/x86/events/intel/uncore_snbep.c | 6 +-
arch/x86/hyperv/hv_init.c | 5 +-
arch/x86/include/asm/page_64_types.h | 2 +-
arch/x86/kernel/cpu/amd.c | 2 +
arch/x86/kernel/cpu/common.c | 44 +++-
arch/x86/kernel/cpu/cpu.h | 1 +
arch/x86/kernel/cpu/hygon.c | 2 +
arch/x86/kernel/cpu/mce/intel.c | 5 +-
arch/x86/kernel/irq.c | 4 +-
arch/x86/kernel/traps.c | 2 +-
arch/x86/kvm/vmx/vmx.c | 15 +-
arch/x86/mm/mem_encrypt_identity.c | 9 +
block/blk-mq.c | 18 +-
block/blk.h | 6 +
crypto/Kconfig | 2 +-
crypto/pcrypt.c | 12 +-
drivers/acpi/ac.c | 19 ++
drivers/acpi/acpica/acglobal.h | 2 +
drivers/acpi/acpica/hwesleep.c | 8 +-
drivers/acpi/acpica/hwsleep.c | 11 +-
drivers/acpi/acpica/hwxfsleep.c | 7 +
drivers/acpi/battery.c | 2 +-
drivers/acpi/pmic/intel_pmic.c | 51 +++--
drivers/android/binder.c | 22 +-
drivers/ata/libata-core.c | 2 +-
drivers/ata/libata-eh.c | 8 +
drivers/auxdisplay/ht16k33.c | 66 +++---
drivers/auxdisplay/img-ascii-lcd.c | 10 +
drivers/base/core.c | 4 +-
drivers/base/power/main.c | 9 +-
drivers/block/ataflop.c | 237 ++++++++++++-------
drivers/block/zram/zram_drv.c | 2 +-
drivers/bluetooth/btmtkuart.c | 13 +-
drivers/bus/ti-sysc.c | 65 +++++-
drivers/char/hw_random/mtk-rng.c | 9 +-
drivers/char/ipmi/ipmi_msghandler.c | 10 +-
drivers/char/ipmi/ipmi_watchdog.c | 17 +-
drivers/char/tpm/tpm2-space.c | 3 +
drivers/char/tpm/tpm_tis_core.c | 26 ++-
drivers/char/tpm/tpm_tis_core.h | 4 +
drivers/char/tpm/tpm_tis_spi_main.c | 1 +
drivers/clk/at91/clk-sam9x60-pll.c | 4 +-
drivers/clk/at91/pmc.c | 5 +
drivers/clk/mvebu/ap-cpu-clk.c | 14 +-
drivers/clocksource/Kconfig | 1 +
drivers/cpuidle/sysfs.c | 5 +-
drivers/crypto/caam/caampkc.c | 19 +-
drivers/crypto/caam/regs.h | 3 +
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 13 ++
drivers/crypto/qat/qat_common/adf_vf_isr.c | 6 +
drivers/crypto/s5p-sss.c | 2 +
drivers/dma-buf/dma-buf.c | 1 +
drivers/dma/at_xdmac.c | 2 +-
drivers/dma/dmaengine.h | 2 +-
drivers/edac/amd64_edac.c | 22 +-
drivers/edac/sb_edac.c | 2 +-
drivers/firmware/psci/psci_checker.c | 2 +-
drivers/firmware/qcom_scm.c | 2 +-
drivers/gpio/gpio-mlxbf2.c | 5 +
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.h | 2 +-
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 4 +-
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 8 +-
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c | 17 +-
drivers/gpu/drm/amd/amdkfd/kfd_device.c | 1 +
.../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 16 +-
drivers/gpu/drm/drm_panel_orientation_quirks.c | 47 +++-
drivers/gpu/drm/drm_plane_helper.c | 1 -
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c | 8 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 +
drivers/gpu/drm/msm/msm_gem.c | 4 +-
drivers/gpu/drm/msm/msm_gpu.c | 2 +-
drivers/gpu/drm/nouveau/nouveau_svm.c | 4 +
drivers/gpu/drm/sun4i/sun8i_csc.h | 4 +-
drivers/gpu/drm/ttm/ttm_bo_vm.c | 5 -
drivers/gpu/drm/v3d/v3d_gem.c | 4 +-
drivers/gpu/drm/virtio/virtgpu_vq.c | 8 +-
drivers/hid/hid-u2fzero.c | 10 +-
drivers/hv/hyperv_vmbus.h | 1 +
drivers/hwmon/hwmon.c | 6 +-
drivers/hwmon/pmbus/lm25066.c | 25 +-
drivers/hwtracing/coresight/coresight-cti-core.c | 2 +-
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
drivers/i2c/busses/i2c-xlr.c | 6 +-
drivers/iio/accel/st_accel_core.c | 21 +-
drivers/iio/accel/st_accel_i2c.c | 17 +-
drivers/iio/accel/st_accel_spi.c | 17 +-
drivers/iio/dac/ad5446.c | 9 +-
drivers/iio/dac/ad5770r.c | 2 +-
drivers/iio/gyro/st_gyro_core.c | 15 +-
drivers/iio/gyro/st_gyro_i2c.c | 17 +-
drivers/iio/gyro/st_gyro_spi.c | 17 +-
drivers/iio/imu/adis.c | 4 +-
drivers/iio/magnetometer/st_magn_core.c | 15 +-
drivers/iio/magnetometer/st_magn_i2c.c | 14 +-
drivers/iio/magnetometer/st_magn_spi.c | 14 +-
drivers/iio/pressure/st_pressure_core.c | 15 +-
drivers/iio/pressure/st_pressure_i2c.c | 17 +-
drivers/iio/pressure/st_pressure_spi.c | 17 +-
drivers/infiniband/hw/bnxt_re/qplib_fp.c | 3 +-
drivers/infiniband/hw/mlx4/qp.c | 4 +-
drivers/infiniband/hw/qedr/verbs.c | 15 +-
drivers/infiniband/sw/rxe/rxe_param.h | 2 +-
drivers/input/joystick/iforce/iforce-usb.c | 2 +-
drivers/input/mouse/elantech.c | 13 ++
drivers/input/serio/i8042-x86ia64io.h | 14 ++
drivers/irqchip/irq-bcm6345-l1.c | 2 +-
drivers/irqchip/irq-sifive-plic.c | 8 +-
drivers/isdn/hardware/mISDN/hfcpci.c | 8 +-
drivers/md/md.c | 11 +-
drivers/media/dvb-frontends/mn88443x.c | 18 +-
drivers/media/i2c/Kconfig | 1 +
drivers/media/i2c/ir-kbd-i2c.c | 1 +
drivers/media/i2c/mt9p031.c | 28 ++-
drivers/media/i2c/tda1997x.c | 8 +-
drivers/media/pci/cx23885/cx23885-alsa.c | 3 +-
drivers/media/pci/netup_unidvb/netup_unidvb_core.c | 27 ++-
drivers/media/platform/mtk-vpu/mtk_vpu.c | 5 +-
drivers/media/platform/rcar-vin/rcar-csi2.c | 2 +
drivers/media/platform/s5p-mfc/s5p_mfc.c | 6 +-
drivers/media/platform/stm32/stm32-dcmi.c | 19 +-
drivers/media/radio/radio-wl1273.c | 2 +-
drivers/media/radio/si470x/radio-si470x-i2c.c | 2 +-
drivers/media/radio/si470x/radio-si470x-usb.c | 2 +-
drivers/media/rc/ir_toy.c | 2 +-
drivers/media/rc/ite-cir.c | 2 +-
drivers/media/rc/mceusb.c | 1 +
drivers/media/spi/cxd2880-spi.c | 2 +-
drivers/media/usb/dvb-usb/az6027.c | 1 +
drivers/media/usb/dvb-usb/dibusb-common.c | 2 +-
drivers/media/usb/em28xx/em28xx-cards.c | 5 +-
drivers/media/usb/em28xx/em28xx-core.c | 5 +-
drivers/media/usb/tm6000/tm6000-video.c | 3 +-
drivers/media/usb/uvc/uvc_driver.c | 7 +-
drivers/media/usb/uvc/uvc_v4l2.c | 7 +-
drivers/media/usb/uvc/uvc_video.c | 5 +
drivers/media/v4l2-core/v4l2-ioctl.c | 67 ++++--
drivers/memory/fsl_ifc.c | 13 +-
drivers/memory/renesas-rpc-if.c | 113 +++++++---
drivers/memstick/core/ms_block.c | 2 +-
drivers/memstick/host/jmb38x_ms.c | 2 +-
drivers/memstick/host/r592.c | 8 +-
drivers/mfd/dln2.c | 18 ++
drivers/mfd/mfd-core.c | 2 +
drivers/mmc/host/Kconfig | 2 +-
drivers/mmc/host/dw_mmc.c | 3 +-
drivers/mmc/host/moxart-mmc.c | 16 +-
drivers/mmc/host/mtk-sd.c | 5 +
drivers/mmc/host/mxs-mmc.c | 10 +
drivers/mmc/host/sdhci-omap.c | 18 +-
drivers/most/most_usb.c | 5 +-
drivers/mtd/mtdcore.c | 4 +-
drivers/mtd/nand/raw/ams-delta.c | 12 +-
drivers/mtd/nand/raw/au1550nd.c | 12 +-
drivers/mtd/nand/raw/gpio.c | 12 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 12 +-
drivers/mtd/nand/raw/orion_nand.c | 12 +-
drivers/mtd/nand/raw/pasemi_nand.c | 12 +-
drivers/mtd/nand/raw/plat_nand.c | 12 +-
drivers/mtd/nand/raw/socrates_nand.c | 12 +-
drivers/mtd/nand/raw/xway_nand.c | 12 +-
drivers/mtd/spi-nor/controllers/hisi-sfc.c | 1 -
drivers/net/Kconfig | 2 +-
drivers/net/bonding/bond_sysfs_slave.c | 36 +--
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
drivers/net/dsa/lantiq_gswip.c | 28 ++-
drivers/net/dsa/rtl8366rb.c | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-common.h | 8 +
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 20 +-
drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +-
drivers/net/ethernet/cavium/thunder/nicvf_main.c | 4 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 7 +-
drivers/net/ethernet/chelsio/cxgb4/t4_hw.h | 2 +
.../chelsio/inline_crypto/chtls/chtls_cm.c | 2 +-
.../chelsio/inline_crypto/chtls/chtls_cm.h | 2 +-
drivers/net/ethernet/freescale/enetc/enetc_qos.c | 18 +-
drivers/net/ethernet/google/gve/gve.h | 4 +-
drivers/net/ethernet/google/gve/gve_adminq.h | 1 +
drivers/net/ethernet/google/gve/gve_main.c | 48 +++-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 2 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 9 +-
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 5 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +
drivers/net/ethernet/ibm/ibmvnic.c | 5 +-
drivers/net/ethernet/intel/ice/ice_base.c | 2 +-
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 20 +-
drivers/net/ethernet/netronome/nfp/bpf/main.c | 16 +-
drivers/net/ethernet/netronome/nfp/bpf/main.h | 2 +
drivers/net/ethernet/netronome/nfp/bpf/offload.c | 17 +-
drivers/net/ethernet/realtek/r8169_main.c | 1 +
drivers/net/ethernet/sfc/mcdi_port_common.c | 37 ++-
drivers/net/ethernet/sfc/ptp.c | 4 +-
drivers/net/ethernet/sfc/siena_sriov.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 -
drivers/net/ethernet/ti/davinci_emac.c | 16 +-
drivers/net/ifb.c | 2 +
drivers/net/phy/micrel.c | 9 +-
drivers/net/phy/phy.c | 7 +-
drivers/net/phy/phylink.c | 2 +-
drivers/net/vmxnet3/vmxnet3_drv.c | 1 -
drivers/net/vrf.c | 28 ++-
drivers/net/wireless/ath/ath10k/mac.c | 37 ++-
drivers/net/wireless/ath/ath10k/sdio.c | 5 +-
drivers/net/wireless/ath/ath10k/usb.c | 7 +-
drivers/net/wireless/ath/ath10k/wmi.c | 4 +
drivers/net/wireless/ath/ath10k/wmi.h | 3 +
drivers/net/wireless/ath/ath11k/dbring.c | 16 +-
drivers/net/wireless/ath/ath11k/dp_rx.c | 13 +-
drivers/net/wireless/ath/ath11k/mac.c | 2 +-
drivers/net/wireless/ath/ath11k/qmi.c | 4 +-
drivers/net/wireless/ath/ath11k/reg.c | 11 +-
drivers/net/wireless/ath/ath11k/reg.h | 2 +-
drivers/net/wireless/ath/ath11k/wmi.c | 40 ++--
drivers/net/wireless/ath/ath11k/wmi.h | 3 +-
drivers/net/wireless/ath/ath6kl/usb.c | 7 +-
drivers/net/wireless/ath/ath9k/main.c | 4 +-
drivers/net/wireless/ath/dfs_pattern_detector.c | 10 +-
drivers/net/wireless/ath/wcn36xx/dxe.c | 49 ++--
drivers/net/wireless/ath/wcn36xx/main.c | 8 +-
drivers/net/wireless/ath/wcn36xx/smd.c | 44 +++-
drivers/net/wireless/ath/wcn36xx/txrx.c | 64 +++---
drivers/net/wireless/ath/wcn36xx/txrx.h | 3 +-
drivers/net/wireless/broadcom/b43/phy_g.c | 2 +-
drivers/net/wireless/broadcom/b43legacy/radio.c | 2 +-
.../net/wireless/broadcom/brcm80211/brcmfmac/dmi.c | 10 +
drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 3 +
drivers/net/wireless/marvell/libertas/if_usb.c | 2 +
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 2 +
drivers/net/wireless/marvell/mwifiex/11n.c | 5 +-
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 32 +--
drivers/net/wireless/marvell/mwifiex/pcie.c | 36 ++-
drivers/net/wireless/marvell/mwifiex/usb.c | 16 ++
drivers/net/wireless/marvell/mwl8k.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 15 +-
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c | 13 +-
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 8 +-
drivers/net/wireless/microchip/wilc1000/cfg80211.c | 3 +-
.../net/wireless/realtek/rtl818x/rtl8187/rtl8225.c | 14 +-
drivers/net/wireless/realtek/rtw88/fw.c | 7 +-
drivers/net/wireless/realtek/rtw88/reg.h | 1 +
drivers/net/wireless/rsi/rsi_91x_core.c | 2 +
drivers/net/wireless/rsi/rsi_91x_hal.c | 10 +-
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 74 ++----
drivers/net/wireless/rsi/rsi_91x_main.c | 17 +-
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 24 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 5 +-
drivers/net/wireless/rsi/rsi_91x_usb.c | 5 +-
drivers/net/wireless/rsi/rsi_hal.h | 11 +
drivers/net/wireless/rsi/rsi_main.h | 15 +-
drivers/net/xen-netfront.c | 8 +
drivers/nfc/pn533/pn533.c | 6 +-
drivers/nvme/host/multipath.c | 9 +-
drivers/nvme/host/rdma.c | 2 +
drivers/nvme/target/configfs.c | 2 +
drivers/nvme/target/rdma.c | 24 ++
drivers/nvme/target/tcp.c | 21 +-
drivers/of/unittest.c | 16 +-
drivers/opp/of.c | 2 +-
drivers/pci/controller/cadence/pcie-cadence-plat.c | 2 +
drivers/pci/controller/dwc/pcie-uniphier.c | 26 +--
drivers/pci/controller/pci-aardvark.c | 251 ++++++++++++++++++---
drivers/pci/pci-bridge-emul.c | 13 ++
drivers/pci/quirks.c | 1 +
drivers/phy/qualcomm/phy-qcom-qusb2.c | 16 +-
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 2 +-
drivers/phy/ti/phy-gmii-sel.c | 2 +
drivers/pinctrl/core.c | 2 +
drivers/pinctrl/pinctrl-equilibrium.c | 7 +-
drivers/pinctrl/renesas/core.c | 2 +-
drivers/platform/x86/thinkpad_acpi.c | 2 +-
drivers/platform/x86/wmi.c | 9 +-
drivers/power/supply/bq27xxx_battery_i2c.c | 3 +-
drivers/power/supply/max17040_battery.c | 2 +
drivers/power/supply/max17042_battery.c | 12 +-
drivers/power/supply/rt5033_battery.c | 2 +-
drivers/regulator/s5m8767.c | 21 +-
drivers/remoteproc/remoteproc_core.c | 8 +-
drivers/reset/reset-socfpga.c | 26 +++
drivers/reset/tegra/reset-bpmp.c | 9 +-
drivers/rtc/rtc-rv3032.c | 4 +-
drivers/s390/char/tape_std.c | 3 +-
drivers/s390/cio/css.c | 4 +-
drivers/s390/cio/device_ops.c | 12 +-
drivers/s390/crypto/ap_queue.c | 2 +
drivers/scsi/csiostor/csio_lnode.c | 2 +-
drivers/scsi/dc395x.c | 1 +
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/qla2xxx/qla_attr.c | 24 +-
drivers/scsi/qla2xxx/qla_dbg.c | 3 +-
drivers/scsi/qla2xxx/qla_gbl.h | 2 -
drivers/scsi/qla2xxx/qla_init.c | 54 ++++-
drivers/scsi/qla2xxx/qla_mr.c | 23 --
drivers/scsi/qla2xxx/qla_os.c | 47 ++--
drivers/scsi/qla2xxx/qla_target.c | 14 +-
drivers/scsi/scsi_lib.c | 2 -
drivers/scsi/ufs/ufshcd-pltfrm.c | 6 +-
drivers/scsi/ufs/ufshcd.c | 29 +--
drivers/scsi/ufs/ufshcd.h | 3 +
drivers/soc/fsl/dpaa2-console.c | 1 +
drivers/soc/fsl/dpio/dpio-service.c | 2 +-
drivers/soc/fsl/dpio/qbman-portal.c | 9 +-
drivers/soc/qcom/apr.c | 2 +
drivers/soc/qcom/rpmhpd.c | 21 +-
drivers/soc/tegra/pmc.c | 2 +-
drivers/soundwire/debugfs.c | 2 +-
drivers/spi/spi-bcm-qspi.c | 5 +-
drivers/spi/spi-pl022.c | 5 +-
drivers/spi/spi-rpc-if.c | 4 +-
drivers/staging/ks7010/Kconfig | 3 +
drivers/staging/media/allegro-dvt/allegro-core.c | 9 +
drivers/staging/media/atomisp/i2c/atomisp-lm3554.c | 37 +--
drivers/staging/media/imx/imx-media-dev-common.c | 2 +
drivers/staging/media/ipu3/ipu3-v4l2.c | 7 +-
drivers/staging/media/rkvdec/rkvdec-h264.c | 5 +-
drivers/staging/media/rkvdec/rkvdec.c | 40 ++--
drivers/staging/most/dim2/Makefile | 2 +-
drivers/staging/most/dim2/dim2.c | 24 +-
drivers/staging/most/dim2/sysfs.c | 49 ----
drivers/staging/most/dim2/sysfs.h | 11 -
drivers/tty/serial/8250/8250_dw.c | 2 +-
drivers/tty/serial/8250/8250_port.c | 21 +-
drivers/tty/serial/imx.c | 4 +-
drivers/tty/serial/serial_core.c | 16 +-
drivers/tty/serial/xilinx_uartps.c | 3 +-
drivers/usb/chipidea/core.c | 23 +-
drivers/usb/dwc2/drd.c | 24 +-
drivers/usb/gadget/legacy/hid.c | 4 +-
drivers/usb/host/xhci-hub.c | 3 +-
drivers/usb/host/xhci-pci.c | 16 ++
drivers/usb/misc/iowarrior.c | 8 +-
drivers/usb/musb/Kconfig | 2 +-
drivers/usb/serial/keyspan.c | 15 +-
drivers/usb/typec/Kconfig | 4 +-
drivers/video/backlight/backlight.c | 6 -
drivers/video/fbdev/chipsfb.c | 2 +-
drivers/virtio/virtio_ring.c | 14 +-
drivers/watchdog/Kconfig | 2 +-
drivers/watchdog/f71808e_wdt.c | 4 +-
drivers/watchdog/omap_wdt.c | 6 +-
drivers/xen/balloon.c | 86 +++++--
drivers/xen/xen-pciback/conf_space_capability.c | 2 +-
fs/btrfs/disk-io.c | 3 +-
fs/btrfs/reflink.c | 2 +-
fs/btrfs/tree-log.c | 4 +-
fs/btrfs/volumes.c | 14 +-
fs/crypto/fscrypt_private.h | 5 +-
fs/crypto/hkdf.c | 11 +-
fs/crypto/keysetup.c | 57 ++++-
fs/erofs/decompressor.c | 1 -
fs/exfat/inode.c | 2 +-
fs/ext4/extents.c | 63 +++---
fs/ext4/super.c | 9 +-
fs/f2fs/inode.c | 2 +-
fs/f2fs/namei.c | 2 +-
fs/fuse/dev.c | 14 +-
fs/gfs2/glock.c | 24 +-
fs/jfs/jfs_mount.c | 51 ++---
fs/nfs/dir.c | 7 +-
fs/nfs/direct.c | 2 +-
fs/nfs/flexfilelayout/flexfilelayoutdev.c | 4 +-
fs/nfs/nfs4idmap.c | 2 +-
fs/nfs/nfs4proc.c | 15 +-
fs/nfs/pnfs.h | 2 +-
fs/nfs/pnfs_nfs.c | 6 +-
fs/nfs/write.c | 26 +--
fs/ocfs2/file.c | 8 +-
fs/orangefs/dcache.c | 4 +-
fs/overlayfs/file.c | 16 +-
fs/proc/stat.c | 4 +-
fs/proc/uptime.c | 14 +-
fs/quota/quota_tree.c | 15 ++
fs/tracefs/inode.c | 3 +-
include/linux/blkdev.h | 2 -
include/linux/console.h | 2 +
include/linux/ethtool_netlink.h | 3 +
include/linux/filter.h | 1 +
include/linux/kernel_stat.h | 1 +
include/linux/libata.h | 2 +-
include/linux/lsm_hook_defs.h | 14 +-
include/linux/lsm_hooks.h | 14 +-
include/linux/nfs_fs.h | 1 +
include/linux/posix-timers.h | 2 +
include/linux/rpmsg.h | 2 +-
include/linux/sched/task.h | 3 +-
include/linux/sched/task_stack.h | 4 +
include/linux/security.h | 33 +--
include/linux/seq_file.h | 2 +-
include/linux/tpm.h | 1 +
include/memory/renesas-rpc-if.h | 1 +
include/net/inet_connection_sock.h | 2 +-
include/net/llc.h | 4 +-
include/net/neighbour.h | 12 +-
include/net/sch_generic.h | 4 +
include/net/sock.h | 2 +-
include/net/strparser.h | 16 +-
include/net/tcp.h | 17 +-
include/net/udp.h | 5 +-
include/uapi/linux/ethtool_netlink.h | 4 +-
include/uapi/linux/pci_regs.h | 6 +
kernel/bpf/core.c | 4 +-
kernel/bpf/verifier.c | 4 +-
kernel/cgroup/cgroup.c | 31 ++-
kernel/cgroup/rstat.c | 2 -
kernel/fork.c | 3 +-
kernel/kprobes.c | 3 +-
kernel/locking/lockdep.c | 4 +-
kernel/power/energy_model.c | 23 +-
kernel/power/swap.c | 7 +-
kernel/rcu/rcutorture.c | 48 +++-
kernel/rcu/tasks.h | 3 +-
kernel/rcu/tree_exp.h | 2 +-
kernel/rcu/tree_plugin.h | 8 +-
kernel/sched/core.c | 43 ++--
kernel/signal.c | 18 +-
kernel/time/posix-cpu-timers.c | 19 +-
kernel/trace/ring_buffer.c | 5 +
kernel/trace/tracing_map.c | 40 ++--
kernel/workqueue.c | 15 +-
lib/decompress_unxz.c | 2 +-
lib/iov_iter.c | 5 +-
lib/xz/xz_dec_lzma2.c | 21 +-
lib/xz/xz_dec_stream.c | 6 +-
mm/memcontrol.c | 27 +--
mm/oom_kill.c | 23 +-
mm/zsmalloc.c | 7 +-
net/8021q/vlan.c | 3 -
net/8021q/vlan_dev.c | 3 +
net/9p/client.c | 2 +
net/bluetooth/l2cap_sock.c | 10 +-
net/bluetooth/sco.c | 33 +--
net/can/j1939/main.c | 7 +
net/can/j1939/transport.c | 6 +
net/core/dev.c | 5 +-
net/core/filter.c | 21 ++
net/core/neighbour.c | 48 ++--
net/core/net-sysfs.c | 55 +++++
net/core/net_namespace.c | 4 +
net/core/stream.c | 3 -
net/core/sysctl_net_core.c | 2 +-
net/dccp/dccp.h | 2 +-
net/dccp/proto.c | 14 +-
net/ethtool/pause.c | 3 +-
net/ipv4/inet_connection_sock.c | 4 +-
net/ipv4/inet_hashtables.c | 2 +-
net/ipv4/proc.c | 2 +-
net/ipv4/tcp.c | 40 +++-
net/ipv4/tcp_bpf.c | 1 -
net/ipv6/addrconf.c | 3 +
net/ipv6/udp.c | 2 +-
net/netfilter/nf_conntrack_proto_udp.c | 7 +-
net/netfilter/nfnetlink_queue.c | 2 +-
net/netfilter/nft_dynset.c | 11 +-
net/rds/ib.c | 10 -
net/rds/ib.h | 6 -
net/rds/ib_cm.c | 128 +++++++----
net/rds/ib_recv.c | 18 +-
net/rds/ib_send.c | 8 +
net/rxrpc/rtt.c | 2 +-
net/sched/sch_generic.c | 9 +
net/sched/sch_mq.c | 24 ++
net/sched/sch_mqprio.c | 23 ++
net/sched/sch_taprio.c | 27 ++-
net/smc/af_smc.c | 20 +-
net/smc/smc_llc.c | 2 +-
net/strparser/strparser.c | 10 +-
net/sunrpc/addr.c | 40 ++--
net/sunrpc/xprt.c | 28 +--
net/vmw_vsock/af_vsock.c | 2 +
samples/kprobes/kretprobe_example.c | 2 +-
scripts/leaking_addresses.pl | 3 +-
security/apparmor/label.c | 4 +-
security/integrity/evm/evm_main.c | 2 +-
security/security.c | 14 +-
security/selinux/hooks.c | 36 ++-
security/selinux/ss/services.c | 162 +++++++------
security/smack/smackfs.c | 11 +-
sound/core/oss/mixer_oss.c | 43 +++-
sound/core/timer.c | 17 +-
sound/pci/hda/hda_intel.c | 74 +++---
sound/pci/hda/patch_realtek.c | 82 +++++++
sound/soc/codecs/cs42l42.c | 88 ++++----
sound/soc/soc-core.c | 1 +
sound/soc/sof/topology.c | 9 +
sound/synth/emux/emux.c | 2 +-
sound/usb/6fire/comm.c | 2 +-
sound/usb/6fire/firmware.c | 6 +-
sound/usb/format.c | 1 +
sound/usb/line6/driver.c | 14 +-
sound/usb/line6/driver.h | 2 +-
sound/usb/line6/podhd.c | 6 +-
sound/usb/line6/toneport.c | 2 +-
sound/usb/misc/ua101.c | 4 +-
sound/usb/quirks.c | 1 +
tools/bpf/bpftool/prog.c | 16 +-
tools/lib/bpf/bpf_core_read.h | 2 +-
tools/lib/bpf/btf.c | 25 +-
tools/objtool/check.c | 19 +-
tools/perf/util/bpf-event.c | 4 +-
.../testing/selftests/bpf/prog_tests/perf_buffer.c | 4 +-
tools/testing/selftests/bpf/prog_tests/sk_lookup.c | 85 +++++--
tools/testing/selftests/bpf/progs/strobemeta.h | 11 +
tools/testing/selftests/bpf/progs/test_sk_lookup.c | 62 +++--
tools/testing/selftests/bpf/test_progs.c | 4 +-
.../testing/selftests/bpf/verifier/array_access.c | 2 +-
tools/testing/selftests/core/close_range_test.c | 2 +-
tools/testing/selftests/kvm/lib/x86_64/svm.c | 22 +-
.../selftests/kvm/x86_64/mmio_warning_test.c | 2 +-
tools/testing/selftests/net/fcnal-test.sh | 3 +
tools/testing/selftests/net/udpgso_bench_rx.c | 11 +-
593 files changed, 4821 insertions(+), 2452 deletions(-)
From: Todd Kjos <[email protected]>
commit 29bc22ac5e5bc63275e850f0c8fc549e3d0e306b upstream.
Save the 'struct cred' associated with a binder process
at initial open to avoid potential race conditions
when converting to an euid.
Set a transaction's sender_euid from the 'struct cred'
saved at binder_open() instead of looking up the euid
from the binder proc's 'struct task'. This ensures
the euid is associated with the security context that
of the task that opened binder.
Cc: [email protected] # 4.4+
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Signed-off-by: Todd Kjos <[email protected]>
Suggested-by: Stephen Smalley <[email protected]>
Suggested-by: Jann Horn <[email protected]>
Acked-by: Casey Schaufler <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/android/binder.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -420,6 +420,9 @@ enum binder_deferred_state {
* (invariant after initialized)
* @tsk task_struct for group_leader of process
* (invariant after initialized)
+ * @cred struct cred associated with the `struct file`
+ * in binder_open()
+ * (invariant after initialized)
* @deferred_work_node: element for binder_deferred_list
* (protected by binder_deferred_lock)
* @deferred_work: bitmap of deferred work to perform
@@ -465,6 +468,7 @@ struct binder_proc {
struct list_head waiting_threads;
int pid;
struct task_struct *tsk;
+ const struct cred *cred;
struct hlist_node deferred_work_node;
int deferred_work;
bool is_dead;
@@ -3087,7 +3091,7 @@ static void binder_transaction(struct bi
t->from = thread;
else
t->from = NULL;
- t->sender_euid = task_euid(proc->tsk);
+ t->sender_euid = proc->cred->euid;
t->to_proc = target_proc;
t->to_thread = target_thread;
t->code = tr->code;
@@ -4703,6 +4707,7 @@ static void binder_free_proc(struct bind
}
binder_alloc_deferred_release(&proc->alloc);
put_task_struct(proc->tsk);
+ put_cred(proc->cred);
binder_stats_deleted(BINDER_STAT_PROC);
kfree(proc);
}
@@ -5220,6 +5225,7 @@ static int binder_open(struct inode *nod
spin_lock_init(&proc->outer_lock);
get_task_struct(current->group_leader);
proc->tsk = current->group_leader;
+ proc->cred = get_cred(filp->f_cred);
INIT_LIST_HEAD(&proc->todo);
proc->default_priority = task_nice(current);
/* binderfs stashes devices in i_private */
From: Mathias Nyman <[email protected]>
commit e1959faf085b004e6c3afaaaa743381f00e7c015 upstream.
Some USB 3.1 enumeration issues were reported after the hub driver removed
the minimum 100ms limit for the power-on-good delay.
Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of
root hub") the hub driver sets the power-on-delay based on the
bPwrOn2PwrGood value in the hub descriptor.
xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based
on xhci spec section 5.4.8, but it's clearly not enough for the
USB 3.1 devices, causing enumeration issues.
Tests indicate full 100ms delay is needed.
Reported-by: Walt Jr. Brake <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -171,7 +171,6 @@ static void xhci_common_hub_descriptor(s
{
u16 temp;
- desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
@@ -206,6 +205,7 @@ static void xhci_usb2_hub_descriptor(str
desc->bDescriptorType = USB_DT_HUB;
temp = 1 + (ports / 8);
desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
+ desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.8 says 20ms */
/* The Device Removable bits are reported on a byte granularity.
* If the port doesn't exist within that byte, the bit is set to 0.
@@ -258,6 +258,7 @@ static void xhci_usb3_hub_descriptor(str
xhci_common_hub_descriptor(xhci, desc, ports);
desc->bDescriptorType = USB_DT_SS_HUB;
desc->bDescLength = USB_DT_SS_HUB_SIZE;
+ desc->bPwrOn2PwrGood = 50; /* usb 3.1 may fail if less than 100ms */
/* header decode latency should be zero for roothubs,
* see section 4.23.5.2.
From: Johnathon Clark <[email protected]>
commit 5fc462c3aaad601d5089fd5588a5799896a6937d upstream.
On the 'HP Spectre x360 Convertible 14-ea0xx' the microphone mute led is
controlled by GPIO 0x04. The speaker mute LED does not seem to be
exposed by GPIO and is there not set.
[ a slight coding-style fix by tiwai ]
Fixes: c3bb2b521944 ("ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup")
Signed-off-by: Johnathon Clark <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4300,6 +4300,16 @@ static void alc287_fixup_hp_gpio_led(str
alc_fixup_hp_gpio_led(codec, action, 0x10, 0);
}
+static void alc245_fixup_hp_gpio_led(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE)
+ spec->micmute_led_polarity = 1;
+ alc_fixup_hp_gpio_led(codec, action, 0, 0x04);
+}
+
/* turn on/off mic-mute LED per capture hook via VREF change */
static int vref_micmute_led_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
@@ -6616,6 +6626,7 @@ enum {
ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK,
ALC287_FIXUP_HP_GPIO_LED,
ALC256_FIXUP_HP_HEADSET_MIC,
+ ALC245_FIXUP_HP_GPIO_LED,
ALC236_FIXUP_DELL_AIO_HEADSET_MIC,
ALC282_FIXUP_ACER_DISABLE_LINEOUT,
ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST,
@@ -7239,6 +7250,8 @@ static const struct hda_fixup alc269_fix
[ALC245_FIXUP_HP_X360_AMP] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc245_fixup_hp_x360_amp,
+ .chained = true,
+ .chain_id = ALC245_FIXUP_HP_GPIO_LED
},
[ALC288_FIXUP_DELL_HEADSET_MODE] = {
.type = HDA_FIXUP_FUNC,
@@ -8328,6 +8341,10 @@ static const struct hda_fixup alc269_fix
.type = HDA_FIXUP_FUNC,
.v.func = alc256_fixup_tongfang_reset_persistent_settings,
},
+ [ALC245_FIXUP_HP_GPIO_LED] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc245_fixup_hp_gpio_led,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
From: Chen-Yu Tsai <[email protected]>
commit 0887e9e152efbd3601d6c907e90033d25067277d upstream.
The mem-to-mem stateless decoder API specifies support for dynamic
resolution changes. In particular, the decoder should accept format
changes on the OUTPUT queue even when buffers have been allocated,
as long as it is not streaming.
Relax restrictions for S_FMT as described in the previous paragraph,
and as long as the codec format remains the same. This aligns it with
the Hantro and Cedrus decoders. This change was mostly based on commit
ae02d49493b5 ("media: hantro: Fix s_fmt for dynamic resolution changes").
Since rkvdec_s_fmt() is now just a wrapper around the output/capture
variants without any additional shared functionality, drop the wrapper
and call the respective functions directly.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Cc: <[email protected]>
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Nicolas Dufresne <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/media/rkvdec/rkvdec.c | 40 +++++++++++++++++-----------------
1 file changed, 20 insertions(+), 20 deletions(-)
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -270,31 +270,20 @@ static int rkvdec_try_output_fmt(struct
return 0;
}
-static int rkvdec_s_fmt(struct file *file, void *priv,
- struct v4l2_format *f,
- int (*try_fmt)(struct file *, void *,
- struct v4l2_format *))
+static int rkvdec_s_capture_fmt(struct file *file, void *priv,
+ struct v4l2_format *f)
{
struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
struct vb2_queue *vq;
+ int ret;
- if (!try_fmt)
- return -EINVAL;
-
- vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+ /* Change not allowed if queue is busy */
+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
if (vb2_is_busy(vq))
return -EBUSY;
- return try_fmt(file, priv, f);
-}
-
-static int rkvdec_s_capture_fmt(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct rkvdec_ctx *ctx = fh_to_rkvdec_ctx(priv);
- int ret;
-
- ret = rkvdec_s_fmt(file, priv, f, rkvdec_try_capture_fmt);
+ ret = rkvdec_try_capture_fmt(file, priv, f);
if (ret)
return ret;
@@ -309,10 +298,21 @@ static int rkvdec_s_output_fmt(struct fi
struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
const struct rkvdec_coded_fmt_desc *desc;
struct v4l2_format *cap_fmt;
- struct vb2_queue *peer_vq;
+ struct vb2_queue *peer_vq, *vq;
int ret;
/*
+ * In order to support dynamic resolution change, the decoder admits
+ * a resolution change, as long as the pixelformat remains. Can't be
+ * done if streaming.
+ */
+ vq = v4l2_m2m_get_vq(m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
+ if (vb2_is_streaming(vq) ||
+ (vb2_is_busy(vq) &&
+ f->fmt.pix_mp.pixelformat != ctx->coded_fmt.fmt.pix_mp.pixelformat))
+ return -EBUSY;
+
+ /*
* Since format change on the OUTPUT queue will reset the CAPTURE
* queue, we can't allow doing so when the CAPTURE queue has buffers
* allocated.
@@ -321,7 +321,7 @@ static int rkvdec_s_output_fmt(struct fi
if (vb2_is_busy(peer_vq))
return -EBUSY;
- ret = rkvdec_s_fmt(file, priv, f, rkvdec_try_output_fmt);
+ ret = rkvdec_try_output_fmt(file, priv, f);
if (ret)
return ret;
From: Takashi Iwai <[email protected]>
commit 375f8426ed994addd2be4d76febc946a6fdd8280 upstream.
HP OMEN 15 laptop requires the quirk to fiddle with COEF 0x0b bit 2
for toggling the mute LED. It's already implemented for other HP
laptops, and we just need to add a proper fixup entry.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214735
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8530,6 +8530,7 @@ static const struct snd_pci_quirk alc269
ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8783, "HP ZBook Fury 15 G7 Mobile Workstation",
ALC285_FIXUP_HP_GPIO_AMP_INIT),
+ SND_PCI_QUIRK(0x103c, 0x8788, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x87c8, "HP", ALC287_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x87e5, "HP ProBook 440 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x87e7, "HP ProBook 450 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
From: Jaroslav Kysela <[email protected]>
commit 2a5bb694488bb6593066d46881bfd9d07edd1628 upstream.
Another model requires ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853
Signed-off-by: Jaroslav Kysela <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8392,6 +8392,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1025, 0x1308, "Acer Aspire Z24-890", ALC286_FIXUP_ACER_AIO_HEADSET_MIC),
SND_PCI_QUIRK(0x1025, 0x132a, "Acer TravelMate B114-21", ALC233_FIXUP_ACER_HEADSET_MIC),
SND_PCI_QUIRK(0x1025, 0x1330, "Acer TravelMate X514-51T", ALC255_FIXUP_ACER_HEADSET_MIC),
+ SND_PCI_QUIRK(0x1025, 0x141f, "Acer Spin SP513-54N", ALC255_FIXUP_ACER_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1025, 0x142b, "Acer Swift SF314-42", ALC255_FIXUP_ACER_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1025, 0x1430, "Acer TravelMate B311R-31", ALC256_FIXUP_ACER_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1025, 0x1466, "Acer Aspire A515-56", ALC255_FIXUP_ACER_HEADPHONE_AND_MIC),
From: Tim Crawford <[email protected]>
commit dbfe83507cf4ea66ce4efee2ac14c5ad420e31d3 upstream.
Apply the PB51ED PCI quirk to the Clevo PC70HS. Fixes audio output from
the internal speakers.
Signed-off-by: Tim Crawford <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2551,6 +2551,7 @@ static const struct snd_pci_quirk alc882
SND_PCI_QUIRK(0x1558, 0x67d1, "Clevo PB71[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x67f1, "Clevo PC70H[PRS]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x7715, "Clevo X170KM-G", ALC1220_FIXUP_CLEVO_PB51ED),
From: Jeremy Soller <[email protected]>
commit 1278cc5ac2f96bab50dd55c8c05e0a6a77ce323e upstream.
On Clevo NH77HJ, NH77HP, and their 15" variants, there is a headset
microphone input attached to 0x19 that does not have a jack detect. In
order to get it working, the pin configuration needs to be set
correctly, and a new ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE fixup is
applied. This is similar to the existing System76 quirk for ALC293, but
for ALC256.
Signed-off-by: Jeremy Soller <[email protected]>
Signed-off-by: Tim Crawford <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6645,6 +6645,7 @@ enum {
ALC287_FIXUP_YOGA7_14ITL_SPEAKERS,
ALC287_FIXUP_13S_GEN2_SPEAKERS,
ALC256_FIXUP_TONGFANG_RESET_PERSISTENT_SETTINGS,
+ ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -8346,6 +8347,15 @@ static const struct hda_fixup alc269_fix
.type = HDA_FIXUP_FUNC,
.v.func = alc245_fixup_hp_gpio_led,
},
+ [ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x19, 0x03a11120 }, /* use as headset mic, without its own jack detect */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8642,11 +8652,15 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1558, 0x40a1, "Clevo NL40GU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x40c1, "Clevo NL40[CZ]U", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x40d1, "Clevo NL41DU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x5015, "Clevo NH5[58]H[HJK]Q", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x5017, "Clevo NH7[79]H[HJK]Q", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50a3, "Clevo NJ51GU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50b3, "Clevo NK50S[BEZ]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50b6, "Clevo NK50S5", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50b8, "Clevo NK50SZ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50d5, "Clevo NP50D5", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x50e1, "Clevo NH5[58]HPQ", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x50e2, "Clevo NH7[79]HPQ", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50f0, "Clevo NH50A[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50f2, "Clevo NH50E[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50f3, "Clevo NH58DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
From: Takashi Iwai <[email protected]>
commit 4fad4fb9871b43389e4f4bead18ec693064697bb upstream.
ASUS UX550VE (SSID 1043:1970) requires a similar workaround for
managing the routing of the 4 speakers like some other ASUS models.
Add a corresponding quirk entry for fixing it.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212641
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8590,6 +8590,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),
SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC),
SND_PCI_QUIRK(0x1043, 0x194e, "ASUS UX563FD", ALC294_FIXUP_ASUS_HPE),
+ SND_PCI_QUIRK(0x1043, 0x1970, "ASUS UX550VE", ALC289_FIXUP_ASUS_GA401),
SND_PCI_QUIRK(0x1043, 0x1982, "ASUS B1400CEPE", ALC256_FIXUP_ASUS_HPE),
SND_PCI_QUIRK(0x1043, 0x19ce, "ASUS B9450FA", ALC294_FIXUP_ASUS_HPE),
SND_PCI_QUIRK(0x1043, 0x19e1, "ASUS UX581LV", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE),
From: Todd Kjos <[email protected]>
commit 4d5b5539742d2554591751b4248b0204d20dcc9d upstream.
Use the 'struct cred' saved at binder_open() to lookup
the security ID via security_cred_getsecid(). This
ensures that the security context that opened binder
is the one used to generate the secctx.
Cc: [email protected] # 5.4+
Fixes: ec74136ded79 ("binder: create node flag to request sender's security context")
Signed-off-by: Todd Kjos <[email protected]>
Suggested-by: Stephen Smalley <[email protected]>
Reported-by: kernel test robot <[email protected]>
Acked-by: Casey Schaufler <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/android/binder.c | 2 +-
include/linux/security.h | 5 +++++
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -3102,7 +3102,7 @@ static void binder_transaction(struct bi
u32 secid;
size_t added_size;
- security_task_getsecid(proc->tsk, &secid);
+ security_cred_getsecid(proc->cred, &secid);
ret = security_secid_to_secctx(secid, &secctx, &secctx_sz);
if (ret) {
return_error = BR_FAILED_REPLY;
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -1003,6 +1003,11 @@ static inline void security_transfer_cre
{
}
+static inline void security_cred_getsecid(const struct cred *c, u32 *secid)
+{
+ *secid = 0;
+}
+
static inline int security_kernel_act_as(struct cred *cred, u32 secid)
{
return 0;
From: Kai-Heng Feng <[email protected]>
commit c058493df7edcef8f48c1494d9a84218519f966b upstream.
The mute and micmute LEDs don't work on HP EliteBook 840 G7. The same
quirk for other HP laptops can let LEDs work, so apply it.
Signed-off-by: Kai-Heng Feng <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8532,6 +8532,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x8716, "HP Elite Dragonfly G2 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8720, "HP EliteBook x360 1040 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
+ SND_PCI_QUIRK(0x103c, 0x8728, "HP EliteBook 840 G7", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8730, "HP ProBook 445 G7", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_AMP_INIT),
From: Johan Hovold <[email protected]>
commit 55f261b73a7e1cb254577c3536cef8f415de220a upstream.
Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in alloc_stream_buffers() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support")
Cc: [email protected] # 2.6.34
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/misc/ua101.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/usb/misc/ua101.c
+++ b/sound/usb/misc/ua101.c
@@ -1001,7 +1001,7 @@ static int detect_usb_format(struct ua10
fmt_playback->bSubframeSize * ua->playback.channels;
epd = &ua->intf[INTF_CAPTURE]->altsetting[1].endpoint[0].desc;
- if (!usb_endpoint_is_isoc_in(epd)) {
+ if (!usb_endpoint_is_isoc_in(epd) || usb_endpoint_maxp(epd) == 0) {
dev_err(&ua->dev->dev, "invalid capture endpoint\n");
return -ENXIO;
}
@@ -1009,7 +1009,7 @@ static int detect_usb_format(struct ua10
ua->capture.max_packet_bytes = usb_endpoint_maxp(epd);
epd = &ua->intf[INTF_PLAYBACK]->altsetting[1].endpoint[0].desc;
- if (!usb_endpoint_is_isoc_out(epd)) {
+ if (!usb_endpoint_is_isoc_out(epd) || usb_endpoint_maxp(epd) == 0) {
dev_err(&ua->dev->dev, "invalid playback endpoint\n");
return -ENXIO;
}
From: Johan Hovold <[email protected]>
commit f4000b58b64344871d7b27c05e73932f137cfef6 upstream.
USB control and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.
Fixes: 705ececd1c60 ("Staging: add line6 usb driver")
Cc: [email protected] # 2.6.30
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/line6/driver.c | 14 +++++++-------
sound/usb/line6/driver.h | 2 +-
sound/usb/line6/podhd.c | 6 +++---
sound/usb/line6/toneport.c | 2 +-
4 files changed, 12 insertions(+), 12 deletions(-)
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -113,12 +113,12 @@ int line6_send_raw_message(struct usb_li
retval = usb_interrupt_msg(line6->usbdev,
usb_sndintpipe(line6->usbdev, properties->ep_ctrl_w),
(char *)frag_buf, frag_size,
- &partial, LINE6_TIMEOUT * HZ);
+ &partial, LINE6_TIMEOUT);
} else {
retval = usb_bulk_msg(line6->usbdev,
usb_sndbulkpipe(line6->usbdev, properties->ep_ctrl_w),
(char *)frag_buf, frag_size,
- &partial, LINE6_TIMEOUT * HZ);
+ &partial, LINE6_TIMEOUT);
}
if (retval) {
@@ -347,7 +347,7 @@ int line6_read_data(struct usb_line6 *li
ret = usb_control_msg_send(usbdev, 0, 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
(datalen << 8) | 0x21, address, NULL, 0,
- LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ LINE6_TIMEOUT, GFP_KERNEL);
if (ret) {
dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
goto exit;
@@ -360,7 +360,7 @@ int line6_read_data(struct usb_line6 *li
ret = usb_control_msg_recv(usbdev, 0, 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x0012, 0x0000, &len, 1,
- LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ LINE6_TIMEOUT, GFP_KERNEL);
if (ret) {
dev_err(line6->ifcdev,
"receive length failed (error %d)\n", ret);
@@ -387,7 +387,7 @@ int line6_read_data(struct usb_line6 *li
/* receive the result: */
ret = usb_control_msg_recv(usbdev, 0, 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0013, 0x0000, data, datalen, LINE6_TIMEOUT * HZ,
+ 0x0013, 0x0000, data, datalen, LINE6_TIMEOUT,
GFP_KERNEL);
if (ret)
dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
@@ -417,7 +417,7 @@ int line6_write_data(struct usb_line6 *l
ret = usb_control_msg_send(usbdev, 0, 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- 0x0022, address, data, datalen, LINE6_TIMEOUT * HZ,
+ 0x0022, address, data, datalen, LINE6_TIMEOUT,
GFP_KERNEL);
if (ret) {
dev_err(line6->ifcdev,
@@ -430,7 +430,7 @@ int line6_write_data(struct usb_line6 *l
ret = usb_control_msg_recv(usbdev, 0, 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0012, 0x0000, status, 1, LINE6_TIMEOUT * HZ,
+ 0x0012, 0x0000, status, 1, LINE6_TIMEOUT,
GFP_KERNEL);
if (ret) {
dev_err(line6->ifcdev,
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -27,7 +27,7 @@
#define LINE6_FALLBACK_INTERVAL 10
#define LINE6_FALLBACK_MAXPACKETSIZE 16
-#define LINE6_TIMEOUT 1
+#define LINE6_TIMEOUT 1000
#define LINE6_BUFSIZE_LISTEN 64
#define LINE6_MIDI_MESSAGE_MAXLEN 256
--- a/sound/usb/line6/podhd.c
+++ b/sound/usb/line6/podhd.c
@@ -190,7 +190,7 @@ static int podhd_dev_start(struct usb_li
ret = usb_control_msg_send(usbdev, 0,
0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x11, 0,
- NULL, 0, LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ NULL, 0, LINE6_TIMEOUT, GFP_KERNEL);
if (ret) {
dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret);
goto exit;
@@ -200,7 +200,7 @@ static int podhd_dev_start(struct usb_li
ret = usb_control_msg_recv(usbdev, 0, 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x11, 0x0,
- init_bytes, 3, LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ init_bytes, 3, LINE6_TIMEOUT, GFP_KERNEL);
if (ret) {
dev_err(pod->line6.ifcdev,
"receive length failed (error %d)\n", ret);
@@ -220,7 +220,7 @@ static int podhd_dev_start(struct usb_li
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT,
1, 0,
- NULL, 0, LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ NULL, 0, LINE6_TIMEOUT, GFP_KERNEL);
exit:
return ret;
}
--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -128,7 +128,7 @@ static int toneport_send_cmd(struct usb_
ret = usb_control_msg_send(usbdev, 0, 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ,
+ cmd1, cmd2, NULL, 0, LINE6_TIMEOUT,
GFP_KERNEL);
if (ret) {
From: Johan Hovold <[email protected]>
commit 9b371c6cc37f954360989eec41c2ddc5a6b83917 upstream.
USB control and bulk message timeouts are specified in milliseconds and
should specifically not vary with CONFIG_HZ.
Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Cc: [email protected] # 2.6.39
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/6fire/comm.c | 2 +-
sound/usb/6fire/firmware.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/sound/usb/6fire/comm.c
+++ b/sound/usb/6fire/comm.c
@@ -95,7 +95,7 @@ static int usb6fire_comm_send_buffer(u8
int actual_len;
ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP),
- buffer, buffer[1] + 2, &actual_len, HZ);
+ buffer, buffer[1] + 2, &actual_len, 1000);
if (ret < 0)
return ret;
else if (actual_len != buffer[1] + 2)
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -160,7 +160,7 @@ static int usb6fire_fw_ezusb_write(struc
{
return usb_control_msg_send(device, 0, type,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, 0, data, len, HZ, GFP_KERNEL);
+ value, 0, data, len, 1000, GFP_KERNEL);
}
static int usb6fire_fw_ezusb_read(struct usb_device *device,
@@ -168,7 +168,7 @@ static int usb6fire_fw_ezusb_read(struct
{
return usb_control_msg_recv(device, 0, type,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, 0, data, len, HZ, GFP_KERNEL);
+ value, 0, data, len, 1000, GFP_KERNEL);
}
static int usb6fire_fw_fpga_write(struct usb_device *device,
@@ -178,7 +178,7 @@ static int usb6fire_fw_fpga_write(struct
int ret;
ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len,
- &actual_len, HZ);
+ &actual_len, 1000);
if (ret < 0)
return ret;
else if (actual_len != len)
From: Phoenix Huang <[email protected]>
commit be896bd3b72b44126c55768f14c22a8729b0992e upstream.
Some firmwares occasionally report bogus data from trackpoint, with X or Y
displacement being too large (outside of [-127, 127] range). Let's drop such
packets so that we do not generate jumps.
Signed-off-by: Phoenix Huang <[email protected]>
Tested-by: Yufei Du <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elantech.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -517,6 +517,19 @@ static void elantech_report_trackpoint(s
case 0x16008020U:
case 0x26800010U:
case 0x36808000U:
+
+ /*
+ * This firmware misreport coordinates for trackpoint
+ * occasionally. Discard packets outside of [-127, 127] range
+ * to prevent cursor jumps.
+ */
+ if (packet[4] == 0x80 || packet[5] == 0x80 ||
+ packet[1] >> 7 == packet[4] >> 7 ||
+ packet[2] >> 7 == packet[5] >> 7) {
+ elantech_debug("discarding packet [%6ph]\n", packet);
+ break;
+
+ }
x = packet[4] - (int)((packet[1]^0x80) << 1);
y = (int)((packet[2]^0x80) << 1) - packet[5];
From: Johan Hovold <[email protected]>
commit 744d0090a5f6dfa4c81b53402ccdf08313100429 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB")
Signed-off-by: Johan Hovold <[email protected]>
Cc: [email protected] # 5.3
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/joystick/iforce/iforce-usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -92,7 +92,7 @@ static int iforce_usb_get_id(struct ifor
id,
USB_TYPE_VENDOR | USB_DIR_IN |
USB_RECIP_INTERFACE,
- 0, 0, buf, IFORCE_MAX_LENGTH, HZ);
+ 0, 0, buf, IFORCE_MAX_LENGTH, 1000);
if (status < 0) {
dev_err(&iforce_usb->intf->dev,
"usb_submit_urb failed: %d\n", status);
From: Takashi Iwai <[email protected]>
commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream.
Fujitsu Lifebook T725 laptop requires, like a few other similar
models, the nomux and notimeout options to probe the touchpad
properly. This patch adds the corresponding quirk entries.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980
Tested-by: Neal Gompa <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -273,6 +273,13 @@ static const struct dmi_system_id __init
},
},
{
+ /* Fujitsu Lifebook T725 laptop */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T725"),
+ },
+ },
+ {
/* Fujitsu Lifebook U745 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
@@ -841,6 +848,13 @@ static const struct dmi_system_id __init
},
},
{
+ /* Fujitsu Lifebook T725 laptop */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T725"),
+ },
+ },
+ {
/* Fujitsu U574 laptop */
/* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
.matches = {
From: Jason Ormes <[email protected]>
commit 8f27b689066113a3e579d4df171c980c54368c4e upstream.
Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency
quirk as well.
The device is basically just the HX-Stomp with some more buttons on
the face. I've done some recording with it after adding it, and it
seems to function properly with this fix. The Midi features appear to
be working as well.
[ a coding style fix and patch reformat by tiwai ]
Signed-off-by: Jason Ormes <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/format.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -410,6 +410,7 @@ static int line6_parse_audio_format_rate
case USB_ID(0x0e41, 0x4242): /* Line6 Helix Rack */
case USB_ID(0x0e41, 0x4244): /* Line6 Helix LT */
case USB_ID(0x0e41, 0x4246): /* Line6 HX-Stomp */
+ case USB_ID(0x0e41, 0x4253): /* Line6 HX-Stomp XL */
case USB_ID(0x0e41, 0x4247): /* Line6 Pod Go */
case USB_ID(0x0e41, 0x4248): /* Line6 Helix >= fw 2.82 */
case USB_ID(0x0e41, 0x4249): /* Line6 Helix Rack >= fw 2.82 */
From: Damien Le Moal <[email protected]>
commit 68dbbe7d5b4fde736d104cbbc9a2fce875562012 upstream.
Some ATA drives are very slow to respond to READ_LOG_EXT and
READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the
device is revalidated right after resuming a system or inserting the
ATA adapter driver (e.g. ahci). The default 5s timeout
(ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing
errors during the device configuration. Ex:
...
ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133
ata9.00: qc timeout (cmd 0x2f)
ata9.00: Read log page 0x00 failed, Emask 0x4
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: NCQ Send/Recv Log not supported
ata9.00: Read log page 0x08 failed, Emask 0x40
ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: ATA Identify Device Log not supported
ata9.00: failed to set xfermode (err_mask=0x40)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: configured for UDMA/133
...
The timeout error causes a soft reset of the drive link, followed in
most cases by a successful revalidation as that give enough time to the
drive to become fully ready to quickly process the read log commands.
However, in some cases, this also fails resulting in the device being
dropped.
Fix this by using adding the ata_eh_revalidate_timeouts entries for the
READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout
increased to 15s, retriable one time.
Reported-by: Geert Uytterhoeven <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-eh.c | 8 ++++++++
include/linux/libata.h | 2 +-
2 files changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -93,6 +93,12 @@ static const unsigned long ata_eh_identi
ULONG_MAX,
};
+static const unsigned long ata_eh_revalidate_timeouts[] = {
+ 15000, /* Some drives are slow to read log pages when waking-up */
+ 15000, /* combined time till here is enough even for media access */
+ ULONG_MAX,
+};
+
static const unsigned long ata_eh_flush_timeouts[] = {
15000, /* be generous with flush */
15000, /* ditto */
@@ -129,6 +135,8 @@ static const struct ata_eh_cmd_timeout_e
ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
{ .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI),
.timeouts = ata_eh_identify_timeouts, },
+ { .commands = CMDS(ATA_CMD_READ_LOG_EXT, ATA_CMD_READ_LOG_DMA_EXT),
+ .timeouts = ata_eh_revalidate_timeouts, },
{ .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT),
.timeouts = ata_eh_other_timeouts, },
{ .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT),
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -390,7 +390,7 @@ enum {
/* This should match the actual table size of
* ata_eh_cmd_timeout_table in libata-eh.c.
*/
- ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
+ ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7,
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependent */
From: Takashi Iwai <[email protected]>
commit 39173303c83859723dab32c2abfb97296d6af3bf upstream.
The recent change in hda-intel driver to allow repeated probes
surfaced a problem that has been hidden until; the probe process in
the work calls azx_free() at the error path, and this skips the card
free process that eventually releases codec instances. As a result,
we get a kernel WARNING like:
snd_hda_intel 0000:00:1f.3: Cannot probe codecs, giving up
------------[ cut here ]------------
WARNING: CPU: 14 PID: 186 at sound/hda/hdac_bus.c:73
....
For fixing this, we need to call snd_card_free() instead of
azx_free(). Additionally, the device drvdata has to be cleared, as
the driver binding itself is still active. Then the PM and other
driver callbacks will ignore the procedure.
Fixes: c0f1886de7e1 ("ALSA: hda: intel: Allow repeatedly probing on codec configuration errors")
Reported-and-tested-by: Scott Branden <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2392,7 +2392,8 @@ static int azx_probe_continue(struct azx
out_free:
if (err < 0) {
- azx_free(chip);
+ pci_set_drvdata(pci, NULL);
+ snd_card_free(chip->card);
return err;
}
From: Erik Ekman <[email protected]>
[ Upstream commit c62041c5baa9ded3bc6fd38d3f724de70683b489 ]
The 1/10GbaseT modes were set up for cards with SFP+ cages in
3497ed8c852a5 ("sfc: report supported link speeds on SFP connections").
10GbaseT was likely used since no 10G fibre mode existed.
The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144
("net: ethtool: add support for 1000BaseX and missing 10G link modes")
shortly thereafter.
The user guide available at https://support-nic.xilinx.com/wp/drivers
lists support for the following cable and transceiver types in section 2.9:
- QSFP28 100G Direct Attach Cables
- QSFP28 100G SR Optical Transceivers (with SR4 modules listed)
- SFP28 25G Direct Attach Cables
- SFP28 25G SR Optical Transceivers
- QSFP+ 40G Direct Attach Cables
- QSFP+ 40G Active Optical Cables
- QSFP+ 40G SR4 Optical Transceivers
- QSFP+ to SFP+ Breakout Direct Attach Cables
- QSFP+ to SFP+ Breakout Active Optical Cables
- SFP+ 10G Direct Attach Cables
- SFP+ 10G SR Optical Transceivers
- SFP+ 10G LR Optical Transceivers
- SFP 1000BASE‐T Transceivers
- 1G Optical Transceivers
(From user guide issue 28. Issue 16 which also includes older cards like
SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)
Regarding SFP+ 10GBASE‐T transceivers the latest guide says:
"Solarflare adapters do not support 10GBASE‐T transceiver modules."
Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change
depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR).
Before:
$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Current message level: 0x000020f7 (8439)
drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes
After:
$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
1000baseX/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Supports Wake-on: g
Wake-on: d
Current message level: 0x000020f7 (8439)
drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes
Signed-off-by: Erik Ekman <[email protected]>
Acked-by: Martin Habets <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/mcdi_port_common.c | 37 +++++++++++++++------
1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/sfc/mcdi_port_common.c b/drivers/net/ethernet/sfc/mcdi_port_common.c
index 4bd3ef8f3384e..c4fe3c48ac46a 100644
--- a/drivers/net/ethernet/sfc/mcdi_port_common.c
+++ b/drivers/net/ethernet/sfc/mcdi_port_common.c
@@ -132,16 +132,27 @@ void mcdi_to_ethtool_linkset(u32 media, u32 cap, unsigned long *linkset)
case MC_CMD_MEDIA_SFP_PLUS:
case MC_CMD_MEDIA_QSFP_PLUS:
SET_BIT(FIBRE);
- if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN))
+ if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) {
SET_BIT(1000baseT_Full);
- if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN))
- SET_BIT(10000baseT_Full);
- if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN))
+ SET_BIT(1000baseX_Full);
+ }
+ if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) {
+ SET_BIT(10000baseCR_Full);
+ SET_BIT(10000baseLR_Full);
+ SET_BIT(10000baseSR_Full);
+ }
+ if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) {
SET_BIT(40000baseCR4_Full);
- if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN))
+ SET_BIT(40000baseSR4_Full);
+ }
+ if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) {
SET_BIT(100000baseCR4_Full);
- if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN))
+ SET_BIT(100000baseSR4_Full);
+ }
+ if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) {
SET_BIT(25000baseCR_Full);
+ SET_BIT(25000baseSR_Full);
+ }
if (cap & (1 << MC_CMD_PHY_CAP_50000FDX_LBN))
SET_BIT(50000baseCR2_Full);
break;
@@ -192,15 +203,19 @@ u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset)
result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN);
if (TEST_BIT(1000baseT_Half))
result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN);
- if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full))
+ if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full) ||
+ TEST_BIT(1000baseX_Full))
result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN);
- if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full))
+ if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full) ||
+ TEST_BIT(10000baseCR_Full) || TEST_BIT(10000baseLR_Full) ||
+ TEST_BIT(10000baseSR_Full))
result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN);
- if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full))
+ if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full) ||
+ TEST_BIT(40000baseSR4_Full))
result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN);
- if (TEST_BIT(100000baseCR4_Full))
+ if (TEST_BIT(100000baseCR4_Full) || TEST_BIT(100000baseSR4_Full))
result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN);
- if (TEST_BIT(25000baseCR_Full))
+ if (TEST_BIT(25000baseCR_Full) || TEST_BIT(25000baseSR_Full))
result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN);
if (TEST_BIT(50000baseCR2_Full))
result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN);
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit c69b2f46876825c726bd8a97c7fa852d8932bc32 ]
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/thunder/nicvf_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index f3b7b443f9648..c00f1a7ffc15f 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1226,7 +1226,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic)
if (ret < 0) {
netdev_err(nic->netdev,
"Req for #%d msix vectors failed\n", nic->num_vec);
- return 1;
+ return ret;
}
sprintf(nic->irq_name[irq], "%s Mbox", "NICVF");
@@ -1245,7 +1245,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic)
if (!nicvf_check_pf_ready(nic)) {
nicvf_disable_intr(nic, NICVF_INTR_MBOX, 0);
nicvf_unregister_interrupts(nic);
- return 1;
+ return -EIO;
}
return 0;
--
2.33.0
From: Davide Baldo <[email protected]>
[ Upstream commit d94befbb5ae379f6dfd4fa6d460eacc09fa7b9c3 ]
In laptop 'HP Spectre x360 Convertible 15-eb1xxx/8811' both front and
rear speakers are silent, this patch fixes that by overriding the pin
layout and by initializing the amplifier which needs a GPIO pin to be
set to 1 then 0, similar to the existing HP Spectre x360 14 model.
In order to have volume control, both front and rear speakers were
forced to use the DAC1.
This patch also correctly map the mute LED but since there is no
microphone on/off switch exposed by the alsa subsystem it never turns
on by itself.
There are still known audio issues in this laptop: headset microphone
doesn't work, the button to mute/unmute microphone is not yet mapped,
the LED of the mute/unmute speakers doesn't seems to be exposed via
GPIO and never turns on.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213953
Signed-off-by: Davide Baldo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 46 +++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 5b28275147057..2eb06351de1fb 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6363,6 +6363,44 @@ static void alc_fixup_no_int_mic(struct hda_codec *codec,
}
}
+/* GPIO1 = amplifier on/off
+ * GPIO3 = mic mute LED
+ */
+static void alc285_fixup_hp_spectre_x360_eb1(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ static const hda_nid_t conn[] = { 0x02 };
+
+ struct alc_spec *spec = codec->spec;
+ static const struct hda_pintbl pincfgs[] = {
+ { 0x14, 0x90170110 }, /* front/high speakers */
+ { 0x17, 0x90170130 }, /* back/bass speakers */
+ { }
+ };
+
+ //enable micmute led
+ alc_fixup_hp_gpio_led(codec, action, 0x00, 0x04);
+
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ spec->micmute_led_polarity = 1;
+ /* needed for amp of back speakers */
+ spec->gpio_mask |= 0x01;
+ spec->gpio_dir |= 0x01;
+ snd_hda_apply_pincfgs(codec, pincfgs);
+ /* share DAC to have unified volume control */
+ snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn), conn);
+ snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn), conn);
+ break;
+ case HDA_FIXUP_ACT_INIT:
+ /* need to toggle GPIO to enable the amp of back speakers */
+ alc_update_gpio_data(codec, 0x01, true);
+ msleep(100);
+ alc_update_gpio_data(codec, 0x01, false);
+ break;
+ }
+}
+
static void alc285_fixup_hp_spectre_x360(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -6515,6 +6553,7 @@ enum {
ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED,
ALC280_FIXUP_HP_9480M,
ALC245_FIXUP_HP_X360_AMP,
+ ALC285_FIXUP_HP_SPECTRE_X360_EB1,
ALC288_FIXUP_DELL_HEADSET_MODE,
ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC288_FIXUP_DELL_XPS_13,
@@ -8205,6 +8244,10 @@ static const struct hda_fixup alc269_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_hp_spectre_x360,
},
+ [ALC285_FIXUP_HP_SPECTRE_X360_EB1] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc285_fixup_hp_spectre_x360_eb1
+ },
[ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_ideapad_s740_coef,
@@ -8555,6 +8598,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP),
SND_PCI_QUIRK(0x103c, 0x8805, "HP ProBook 650 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
+ SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
+ SND_PCI_QUIRK(0x103c, 0x8812, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8847, "HP EliteBook x360 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x884b, "HP EliteBook 840 Aero G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
@@ -8979,6 +9024,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
{.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"},
{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
{.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"},
+ {.id = ALC285_FIXUP_HP_SPECTRE_X360_EB1, .name = "alc285-hp-spectre-x360-eb1"},
{.id = ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP, .name = "alc287-ideapad-bass-spk-amp"},
{.id = ALC623_FIXUP_LENOVO_THINKSTATION_P340, .name = "alc623-lenovo-thinkstation-p340"},
{.id = ALC255_FIXUP_ACER_HEADPHONE_AND_MIC, .name = "alc255-acer-headphone-and-mic"},
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit c448b7aa3e66042fc0f849d9a0fb90d1af82e948 ]
'component' is allocated in snd_soc_register_component(), but component->list
is not initalized, this may cause snd_soc_del_component_unlocked() deref null
ptr in the error handing case.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__list_del_entry_valid+0x81/0xf0
Call Trace:
snd_soc_del_component_unlocked+0x69/0x1b0 [snd_soc_core]
snd_soc_add_component.cold+0x54/0x6c [snd_soc_core]
snd_soc_register_component+0x70/0x90 [snd_soc_core]
devm_snd_soc_register_component+0x5e/0xd0 [snd_soc_core]
tas2552_probe+0x265/0x320 [snd_soc_tas2552]
? tas2552_component_probe+0x1e0/0x1e0 [snd_soc_tas2552]
i2c_device_probe+0xa31/0xbe0
Fix by adding INIT_LIST_HEAD() to snd_soc_component_initialize().
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index e677422c10585..1332965968646 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2454,6 +2454,7 @@ int snd_soc_component_initialize(struct snd_soc_component *component,
INIT_LIST_HEAD(&component->dai_list);
INIT_LIST_HEAD(&component->dobj_list);
INIT_LIST_HEAD(&component->card_list);
+ INIT_LIST_HEAD(&component->list);
mutex_init(&component->io_mutex);
component->name = fmt_single_name(dev, &component->id);
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit 06634d5b6e923ed0d4772aba8def5a618f44c7fe ]
The driver probing function should return < 0 for failure, otherwise
kernel will treat value > 0 as success.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_os.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e075f855f298e..813abaf1b0872 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4079,7 +4079,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
ql_dbg_pci(ql_dbg_init, ha->pdev,
0xe0ee, "%s: failed alloc dsd\n",
__func__);
- return 1;
+ return -ENOMEM;
}
ha->dif_bundle_kallocs++;
--
2.33.0
From: Dmitry Bogdanov <[email protected]>
[ Upstream commit 4a8f71014b4d56c4fb287607e844c0a9f68f46d9 ]
The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:
NIP dma_direct_unmap_sg+0xdc/0x180
LR dma_direct_unmap_sg+0xc8/0x180
Call Trace:
ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
dma_unmap_sg_attrs+0x54/0xf0
qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
qlt_free_cmd+0x124/0x1d0 [qla2xxx]
tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
target_put_sess_cmd+0x198/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]
The sgl may be left unmapped in error cases of response sending. For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.
This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_target.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 8d4976725a75a..ebed14bed7835 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3256,8 +3256,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type,
"RESET-RSP online/active/old-count/new-count = %d/%d/%d/%d.\n",
vha->flags.online, qla2x00_reset_active(vha),
cmd->reset_count, qpair->chip_reset);
- spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
- return 0;
+ goto out_unmap_unlock;
}
/* Does F/W have an IOCBs for this request */
@@ -3380,10 +3379,6 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd)
prm.sg = NULL;
prm.req_cnt = 1;
- /* Calculate number of entries and segments required */
- if (qlt_pci_map_calc_cnt(&prm) != 0)
- return -EAGAIN;
-
if (!qpair->fw_started || (cmd->reset_count != qpair->chip_reset) ||
(cmd->sess && cmd->sess->deleted)) {
/*
@@ -3401,6 +3396,10 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd)
return 0;
}
+ /* Calculate number of entries and segments required */
+ if (qlt_pci_map_calc_cnt(&prm) != 0)
+ return -EAGAIN;
+
spin_lock_irqsave(qpair->qp_lock_ptr, flags);
/* Does F/W have an IOCBs for this request */
res = qlt_check_reserve_free_req(qpair, prm.req_cnt);
@@ -3805,9 +3804,6 @@ void qlt_free_cmd(struct qla_tgt_cmd *cmd)
BUG_ON(cmd->cmd_in_wq);
- if (cmd->sg_mapped)
- qlt_unmap_sg(cmd->vha, cmd);
-
if (!cmd->q_full)
qlt_decr_num_pend_cmds(cmd->vha);
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit b2cddb44bddc1a9c5949a978bb454bba863264db ]
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index 9361f964bb9b2..816453a4f8d6c 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -1193,7 +1193,7 @@ static int nic_register_interrupts(struct nicpf *nic)
dev_err(&nic->pdev->dev,
"Request for #%d msix vectors failed, returned %d\n",
nic->num_vec, ret);
- return 1;
+ return ret;
}
/* Register mailbox interrupt handler */
--
2.33.0
From: Austin Kim <[email protected]>
commit d159037abbe3412285c271bdfb9cdf19e62678ff upstream.
If kcalloc() return NULL due to memory starvation, it is possible for
kstrdup() to return NULL in similar case. So add null check after the call
to kstrdup() is made.
[ minor coding-style fix by tiwai ]
Signed-off-by: Austin Kim <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/20211109003742.GA5423@raspberrypi
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/synth/emux/emux.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/synth/emux/emux.c
+++ b/sound/synth/emux/emux.c
@@ -88,7 +88,7 @@ int snd_emux_register(struct snd_emux *e
emu->name = kstrdup(name, GFP_KERNEL);
emu->voices = kcalloc(emu->max_voices, sizeof(struct snd_emux_voice),
GFP_KERNEL);
- if (emu->voices == NULL)
+ if (emu->name == NULL || emu->voices == NULL)
return -ENOMEM;
/* create soundfont list */
From: Zheyu Ma <[email protected]>
[ Upstream commit e211210098cb7490db2183d725f5c0f10463a704 ]
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/mISDN/hfcpci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index e501cb03f211d..bd087cca1c1d2 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -1994,14 +1994,14 @@ setup_hw(struct hfc_pci *hc)
pci_set_master(hc->pdev);
if (!hc->irq) {
printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n");
- return 1;
+ return -EINVAL;
}
hc->hw.pci_io =
(char __iomem *)(unsigned long)hc->pdev->resource[1].start;
if (!hc->hw.pci_io) {
printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
- return 1;
+ return -ENOMEM;
}
/* Allocate memory for FIFOS */
/* the memory needs to be on a 32k boundary within the first 4G */
@@ -2012,7 +2012,7 @@ setup_hw(struct hfc_pci *hc)
if (!buffer) {
printk(KERN_WARNING
"HFC-PCI: Error allocating memory for FIFO!\n");
- return 1;
+ return -ENOMEM;
}
hc->hw.fifos = buffer;
pci_write_config_dword(hc->pdev, 0x80, hc->hw.dmahandle);
@@ -2022,7 +2022,7 @@ setup_hw(struct hfc_pci *hc)
"HFC-PCI: Error in ioremap for PCI!\n");
dma_free_coherent(&hc->pdev->dev, 0x8000, hc->hw.fifos,
hc->hw.dmahandle);
- return 1;
+ return -ENOMEM;
}
printk(KERN_INFO
--
2.33.0
From: Erik Ekman <[email protected]>
[ Upstream commit bf6abf345dfa77786aca554bc58c64bd428ecb1d ]
Use pci_info instead to avoid unnamed/uninitialized noise:
[197088.688729] sfc 0000:01:00.0: Solarflare NIC detected
[197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F
[197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed
[197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support
Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before
net_device is registered") from Heiner Kallweit.
Signed-off-by: Erik Ekman <[email protected]>
Acked-by: Martin Habets <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/ptp.c | 4 ++--
drivers/net/ethernet/sfc/siena_sriov.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index a39c5143b3864..797e51802ccbb 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -648,7 +648,7 @@ static int efx_ptp_get_attributes(struct efx_nic *efx)
} else if (rc == -EINVAL) {
fmt = MC_CMD_PTP_OUT_GET_ATTRIBUTES_SECONDS_NANOSECONDS;
} else if (rc == -EPERM) {
- netif_info(efx, probe, efx->net_dev, "no PTP support\n");
+ pci_info(efx->pci_dev, "no PTP support\n");
return rc;
} else {
efx_mcdi_display_error(efx, MC_CMD_PTP, sizeof(inbuf),
@@ -824,7 +824,7 @@ static int efx_ptp_disable(struct efx_nic *efx)
* should only have been called during probe.
*/
if (rc == -ENOSYS || rc == -EPERM)
- netif_info(efx, probe, efx->net_dev, "no PTP support\n");
+ pci_info(efx->pci_dev, "no PTP support\n");
else if (rc)
efx_mcdi_display_error(efx, MC_CMD_PTP,
MC_CMD_PTP_IN_DISABLE_LEN,
diff --git a/drivers/net/ethernet/sfc/siena_sriov.c b/drivers/net/ethernet/sfc/siena_sriov.c
index 83dcfcae3d4b5..441e7f3e53751 100644
--- a/drivers/net/ethernet/sfc/siena_sriov.c
+++ b/drivers/net/ethernet/sfc/siena_sriov.c
@@ -1057,7 +1057,7 @@ void efx_siena_sriov_probe(struct efx_nic *efx)
return;
if (efx_siena_sriov_cmd(efx, false, &efx->vi_scale, &count)) {
- netif_info(efx, probe, efx->net_dev, "no SR-IOV VFs probed\n");
+ pci_info(efx->pci_dev, "no SR-IOV VFs probed\n");
return;
}
if (count > 0 && count > max_vfs)
--
2.33.0
From: Mikko Perttunen <[email protected]>
[ Upstream commit c045ceb5a145d2a9a4bf33cbc55185ddf99f60ab ]
The return value from tegra_bpmp_transfer indicates the success or
failure of the IPC transaction with BPMP. If the transaction
succeeded, we also need to check the actual command's result code.
Add code to do this.
Signed-off-by: Mikko Perttunen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/reset/tegra/reset-bpmp.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/tegra/reset-bpmp.c b/drivers/reset/tegra/reset-bpmp.c
index 24d3395964cc4..4c5bba52b1059 100644
--- a/drivers/reset/tegra/reset-bpmp.c
+++ b/drivers/reset/tegra/reset-bpmp.c
@@ -20,6 +20,7 @@ static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc,
struct tegra_bpmp *bpmp = to_tegra_bpmp(rstc);
struct mrq_reset_request request;
struct tegra_bpmp_message msg;
+ int err;
memset(&request, 0, sizeof(request));
request.cmd = command;
@@ -30,7 +31,13 @@ static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc,
msg.tx.data = &request;
msg.tx.size = sizeof(request);
- return tegra_bpmp_transfer(bpmp, &msg);
+ err = tegra_bpmp_transfer(bpmp, &msg);
+ if (err)
+ return err;
+ if (msg.rx.ret)
+ return -EINVAL;
+
+ return 0;
}
static int tegra_bpmp_reset_module(struct reset_controller_dev *rstc,
--
2.33.0
From: Paweł Anikiel <[email protected]>
[ Upstream commit 3ad60b4b3570937f3278509fe6797a5093ce53f8 ]
The early reset driver doesn't ever probe, which causes consuming
devices to be unable to probe. Add an empty driver to set this device
as available, allowing consumers to probe.
Signed-off-by: Paweł Anikiel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/reset/reset-socfpga.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
index bdd9842961960..f9fa7fde7afb1 100644
--- a/drivers/reset/reset-socfpga.c
+++ b/drivers/reset/reset-socfpga.c
@@ -85,3 +85,29 @@ void __init socfpga_reset_init(void)
for_each_matching_node(np, socfpga_early_reset_dt_ids)
a10_reset_init(np);
}
+
+/*
+ * The early driver is problematic, because it doesn't register
+ * itself as a driver. This causes certain device links to prevent
+ * consumer devices from probing. The hacky solution is to register
+ * an empty driver, whose only job is to attach itself to the reset
+ * manager and call probe.
+ */
+static const struct of_device_id socfpga_reset_dt_ids[] = {
+ { .compatible = "altr,rst-mgr", },
+ { /* sentinel */ },
+};
+
+static int reset_simple_probe(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver reset_socfpga_driver = {
+ .probe = reset_simple_probe,
+ .driver = {
+ .name = "socfpga-reset",
+ .of_match_table = socfpga_reset_dt_ids,
+ },
+};
+builtin_platform_driver(reset_socfpga_driver);
--
2.33.0
From: Bastien Roucariès <[email protected]>
[ Upstream commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 ]
Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") sets the RX/TX delay according to the phy-mode property in the
device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the
wrong setting.
Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
the Ethernet working again on this board.
Signed-off-by: Bastien Roucariès <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 9ba62774e89a1..488933b87ad5a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,7 +112,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit 162079f2dccd02cb4b6654defd32ca387dd6d4d4 ]
The Winbond MMC driver fails to build on ARCH=m68k so prevent
that build config. Silences these build errors:
../drivers/mmc/host/wbsd.c: In function 'wbsd_request_end':
../drivers/mmc/host/wbsd.c:212:28: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
212 | dmaflags = claim_dma_lock();
../drivers/mmc/host/wbsd.c:215:17: error: implicit declaration of function 'release_dma_lock'; did you mean 'release_task'? [-Werror=implicit-function-declaration]
215 | release_dma_lock(dmaflags);
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Pierre Ossman <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 31481c9fcc2ec..30ff42fd173e2 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -503,7 +503,7 @@ config MMC_OMAP_HS
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on ISA_DMA_API
+ depends on ISA_DMA_API && !M68K
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
--
2.33.0
From: Bryant Mairs <[email protected]>
[ Upstream commit def0c3697287f6e85d5ac68b21302966c95474f9 ]
Fixes screen orientation for the Aya Neo 2021 handheld gaming console.
Signed-off-by: Bryant Mairs <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index f6bdec7fa9253..30c17a76f49ae 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -134,6 +134,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T103HAF"),
},
.driver_data = (void *)&lcd800x1280_rightside_up,
+ }, { /* AYA NEO 2021 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AYADEVICE"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "AYA NEO 2021"),
+ },
+ .driver_data = (void *)&lcd800x1280_rightside_up,
}, { /* GPD MicroPC (generic strings, also match on bios date) */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Default string"),
--
2.33.0
From: Lorenz Bauer <[email protected]>
[ Upstream commit 5d63ae908242f028bd10860cba98450d11c079b8 ]
Expose the maximum amount of useable memory from the arm64 JIT.
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/net/bpf_jit_comp.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 345066b8e9fc8..064577ff9ff59 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1134,6 +1134,11 @@ out:
return prog;
}
+u64 bpf_jit_alloc_exec_limit(void)
+{
+ return BPF_JIT_REGION_SIZE;
+}
+
void *bpf_jit_alloc_exec(unsigned long size)
{
return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,
--
2.33.0
From: Florian Westphal <[email protected]>
[ Upstream commit 1f83b835a3eaa5ae4bd825fb07182698bfc243ba ]
On my box I see a bunch of ping/nettest processes hanging
around after fcntal-test.sh is done.
Clean those up before netns deletion.
Signed-off-by: Florian Westphal <[email protected]>
Acked-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/fcnal-test.sh | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 02b0b9ead40b9..225440f5f99eb 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -436,10 +436,13 @@ cleanup()
ip -netns ${NSA} link set dev ${NSA_DEV} down
ip -netns ${NSA} link del dev ${NSA_DEV}
+ ip netns pids ${NSA} | xargs kill 2>/dev/null
ip netns del ${NSA}
fi
+ ip netns pids ${NSB} | xargs kill 2>/dev/null
ip netns del ${NSB}
+ ip netns pids ${NSC} | xargs kill 2>/dev/null
ip netns del ${NSC} >/dev/null 2>&1
}
--
2.33.0
From: Takashi Iwai <[email protected]>
commit ffdd98277f0a1d15a67a74ae09bee713df4c0dbc upstream.
Like the previous fix (commit c0317c0e8709 "ALSA: timer: Fix
use-after-free problem"), we have to unlink slave timer instances
immediately at snd_timer_stop(), too. Otherwise it may leave a stale
entry in the list if the slave instance is freed before actually
running.
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/timer.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -665,23 +665,22 @@ static int snd_timer_stop1(struct snd_ti
static int snd_timer_stop_slave(struct snd_timer_instance *timeri, bool stop)
{
unsigned long flags;
+ bool running;
spin_lock_irqsave(&slave_active_lock, flags);
- if (!(timeri->flags & SNDRV_TIMER_IFLG_RUNNING)) {
- spin_unlock_irqrestore(&slave_active_lock, flags);
- return -EBUSY;
- }
+ running = timeri->flags & SNDRV_TIMER_IFLG_RUNNING;
timeri->flags &= ~SNDRV_TIMER_IFLG_RUNNING;
if (timeri->timer) {
spin_lock(&timeri->timer->lock);
list_del_init(&timeri->ack_list);
list_del_init(&timeri->active_list);
- snd_timer_notify1(timeri, stop ? SNDRV_TIMER_EVENT_STOP :
- SNDRV_TIMER_EVENT_PAUSE);
+ if (running)
+ snd_timer_notify1(timeri, stop ? SNDRV_TIMER_EVENT_STOP :
+ SNDRV_TIMER_EVENT_PAUSE);
spin_unlock(&timeri->timer->lock);
}
spin_unlock_irqrestore(&slave_active_lock, flags);
- return 0;
+ return running ? 0 : -EBUSY;
}
/*
From: Cyril Strejc <[email protected]>
[ Upstream commit 9122a70a6333705c0c35614ddc51c274ed1d3637 ]
During a testing of an user-space application which transmits UDP
multicast datagrams and utilizes multicast routing to send the UDP
datagrams out of defined network interfaces, I've found a multicast
router does not fill-in UDP checksum into locally produced, looped-back
and forwarded UDP datagrams, if an original output NIC the datagrams
are sent to has UDP TX checksum offload enabled.
The datagrams are sent malformed out of the NIC the datagrams have been
forwarded to.
It is because:
1. If TX checksum offload is enabled on the output NIC, UDP checksum
is not calculated by kernel and is not filled into skb data.
2. dev_loopback_xmit(), which is called solely by
ip_mc_finish_output(), sets skb->ip_summed = CHECKSUM_UNNECESSARY
unconditionally.
3. Since 35fc92a9 ("[NET]: Allow forwarding of ip_summed except
CHECKSUM_COMPLETE"), the ip_summed value is preserved during
forwarding.
4. If ip_summed != CHECKSUM_PARTIAL, checksum is not calculated during
a packet egress.
The minimum fix in dev_loopback_xmit():
1. Preserves skb->ip_summed CHECKSUM_PARTIAL. This is the
case when the original output NIC has TX checksum offload enabled.
The effects are:
a) If the forwarding destination interface supports TX checksum
offloading, the NIC driver is responsible to fill-in the
checksum.
b) If the forwarding destination interface does NOT support TX
checksum offloading, checksums are filled-in by kernel before
skb is submitted to the NIC driver.
c) For local delivery, checksum validation is skipped as in the
case of CHECKSUM_UNNECESSARY, thanks to skb_csum_unnecessary().
2. Translates ip_summed CHECKSUM_NONE to CHECKSUM_UNNECESSARY. It
means, for CHECKSUM_NONE, the behavior is unmodified and is there
to skip a looped-back packet local delivery checksum validation.
Signed-off-by: Cyril Strejc <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/udp.h | 5 +++--
net/core/dev.c | 3 ++-
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/include/net/udp.h b/include/net/udp.h
index 949ae14a54250..435cc009e6eaa 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -488,8 +488,9 @@ static inline struct sk_buff *udp_rcv_segment(struct sock *sk,
* CHECKSUM_NONE in __udp_gso_segment. UDP GRO indeed builds partial
* packets in udp_gro_complete_segment. As does UDP GSO, verified by
* udp_send_skb. But when those packets are looped in dev_loopback_xmit
- * their ip_summed is set to CHECKSUM_UNNECESSARY. Reset in this
- * specific case, where PARTIAL is both correct and required.
+ * their ip_summed CHECKSUM_NONE is changed to CHECKSUM_UNNECESSARY.
+ * Reset in this specific case, where PARTIAL is both correct and
+ * required.
*/
if (skb->pkt_type == PACKET_LOOPBACK)
skb->ip_summed = CHECKSUM_PARTIAL;
diff --git a/net/core/dev.c b/net/core/dev.c
index 6a4e0e3c59fec..e14294e9ba321 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3867,7 +3867,8 @@ int dev_loopback_xmit(struct net *net, struct sock *sk, struct sk_buff *skb)
skb_reset_mac_header(skb);
__skb_pull(skb, skb_network_offset(skb));
skb->pkt_type = PACKET_LOOPBACK;
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+ if (skb->ip_summed == CHECKSUM_NONE)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
WARN_ON(!skb_dst(skb));
skb_dst_force(skb);
netif_rx_ni(skb);
--
2.33.0
From: Dongli Zhang <[email protected]>
[ Upstream commit 042b2046d0f05cf8124c26ff65dbb6148a4404fb ]
The tx queues are not stopped during the live migration. As a result, the
ndo_start_xmit() may access netfront_info->queues which is freed by
talk_to_netback()->xennet_destroy_queues().
This patch is to netif_device_detach() at the beginning of xen-netfront
resuming, and netif_device_attach() at the end of resuming.
CPU A CPU B
talk_to_netback()
-> if (info->queues)
xennet_destroy_queues(info);
to free netfront_info->queues
xennet_start_xmit()
to access netfront_info->queues
-> err = xennet_create_queues(info, &num_queues);
The idea is borrowed from virtio-net.
Cc: Joe Jin <[email protected]>
Signed-off-by: Dongli Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/xen-netfront.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 3e9895bec15f0..dd79534910b05 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1671,6 +1671,10 @@ static int netfront_resume(struct xenbus_device *dev)
dev_dbg(&dev->dev, "%s\n", dev->nodename);
+ netif_tx_lock_bh(info->netdev);
+ netif_device_detach(info->netdev);
+ netif_tx_unlock_bh(info->netdev);
+
xennet_disconnect_backend(info);
return 0;
}
@@ -2285,6 +2289,10 @@ static int xennet_connect(struct net_device *dev)
* domain a kick because we've probably just requeued some
* packets.
*/
+ netif_tx_lock_bh(np->netdev);
+ netif_device_attach(np->netdev);
+ netif_tx_unlock_bh(np->netdev);
+
netif_carrier_on(np->netdev);
for (j = 0; j < num_queues; ++j) {
queue = &np->queues[j];
--
2.33.0
From: Maurizio Lombardi <[email protected]>
[ Upstream commit 926245c7d22271307606c88b1fbb2539a8550e94 ]
page_frag_free() won't completely release the memory
allocated for the commands, the cache page must be explicitly
freed by calling __page_frag_cache_drain().
This bug can be easily reproduced by repeatedly
executing the following command on the initiator:
$echo 1 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/reset_controller
Signed-off-by: Maurizio Lombardi <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: John Meneghini <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/tcp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 5266d534c4b31..b4ef7e9e8461f 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1398,6 +1398,7 @@ static void nvmet_tcp_uninit_data_in_cmds(struct nvmet_tcp_queue *queue)
static void nvmet_tcp_release_queue_work(struct work_struct *w)
{
+ struct page *page;
struct nvmet_tcp_queue *queue =
container_of(w, struct nvmet_tcp_queue, release_work);
@@ -1417,6 +1418,8 @@ static void nvmet_tcp_release_queue_work(struct work_struct *w)
nvmet_tcp_free_crypto(queue);
ida_simple_remove(&nvmet_tcp_queue_ida, queue->idx);
+ page = virt_to_head_page(queue->pf_cache.va);
+ __page_frag_cache_drain(page, queue->pf_cache.pagecnt_bias);
kfree(queue);
}
--
2.33.0
From: Shaoying Xu <[email protected]>
commit 39fec6889d15a658c3a3ebb06fd69d3584ddffd3 upstream.
Ext4 file system has default lazy inode table initialization setup once
it is mounted. However, it has issue on computing the next schedule time
that makes the timeout same amount in jiffies but different real time in
secs if with various HZ values. Therefore, fix by measuring the current
time in a more granular unit nanoseconds and make the next schedule time
independent of the HZ value.
Fixes: bfff68738f1c ("ext4: add support for lazy inode table initialization")
Signed-off-by: Shaoying Xu <[email protected]>
Cc: [email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3436,9 +3436,9 @@ static int ext4_run_li_request(struct ex
struct super_block *sb = elr->lr_super;
ext4_group_t ngroups = EXT4_SB(sb)->s_groups_count;
ext4_group_t group = elr->lr_next_group;
- unsigned long timeout = 0;
unsigned int prefetch_ios = 0;
int ret = 0;
+ u64 start_time;
if (elr->lr_mode == EXT4_LI_MODE_PREFETCH_BBITMAP) {
elr->lr_next_group = ext4_mb_prefetch(sb, group,
@@ -3475,14 +3475,13 @@ static int ext4_run_li_request(struct ex
ret = 1;
if (!ret) {
- timeout = jiffies;
+ start_time = ktime_get_real_ns();
ret = ext4_init_inode_table(sb, group,
elr->lr_timeout ? 0 : 1);
trace_ext4_lazy_itable_init(sb, group);
if (elr->lr_timeout == 0) {
- timeout = (jiffies - timeout) *
- EXT4_SB(elr->lr_super)->s_li_wait_mult;
- elr->lr_timeout = timeout;
+ elr->lr_timeout = nsecs_to_jiffies((ktime_get_real_ns() - start_time) *
+ EXT4_SB(elr->lr_super)->s_li_wait_mult);
}
elr->lr_next_sched = jiffies + elr->lr_timeout;
elr->lr_next_group = group + 1;
From: Asmaa Mnebhi <[email protected]>
[ Upstream commit c0eee6fbfa2b3377f1efed10dad539abeb7312aa ]
Add a check if bgpio_init fails.
Signed-off-by: Asmaa Mnebhi <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-mlxbf2.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpio/gpio-mlxbf2.c b/drivers/gpio/gpio-mlxbf2.c
index befa5e1099439..d4b250b470b41 100644
--- a/drivers/gpio/gpio-mlxbf2.c
+++ b/drivers/gpio/gpio-mlxbf2.c
@@ -268,6 +268,11 @@ mlxbf2_gpio_probe(struct platform_device *pdev)
NULL,
0);
+ if (ret) {
+ dev_err(dev, "bgpio_init failed\n");
+ return ret;
+ }
+
gc->direction_input = mlxbf2_gpio_direction_input;
gc->direction_output = mlxbf2_gpio_direction_output;
gc->ngpio = npins;
--
2.33.0
From: Thomas Perrot <[email protected]>
[ Upstream commit d81d0e41ed5fe7229a2c9a29d13bad288c7cf2d2 ]
There are missing braces in the function that verify controller parameters,
then an error is always returned when the parameter to select Microwire
frames operation is used on devices allowing it.
Signed-off-by: Thomas Perrot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-pl022.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index d1776fea287e5..e4ee8b0847993 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1723,12 +1723,13 @@ static int verify_controller_parameters(struct pl022 *pl022,
return -EINVAL;
}
} else {
- if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX)
+ if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) {
dev_err(&pl022->adev->dev,
"Microwire half duplex mode requested,"
" but this is only available in the"
" ST version of PL022\n");
- return -EINVAL;
+ return -EINVAL;
+ }
}
}
return 0;
--
2.33.0
From: Walter Stoll <[email protected]>
[ Upstream commit cd004d8299f1dc6cfa6a4eea8f94cb45eaedf070 ]
TI's implementation does not service the watchdog even if the kernel
command line parameter omap_wdt.early_enable is set to 1. This patch
fixes the issue.
Signed-off-by: Walter Stoll <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/omap_wdt.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 1616f93dfad7f..74d785b2b478f 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -268,8 +268,12 @@ static int omap_wdt_probe(struct platform_device *pdev)
wdev->wdog.bootstatus = WDIOF_CARDRESET;
}
- if (!early_enable)
+ if (early_enable) {
+ omap_wdt_start(&wdev->wdog);
+ set_bit(WDOG_HW_RUNNING, &wdev->wdog.status);
+ } else {
omap_wdt_disable(wdev);
+ }
ret = watchdog_register_device(&wdev->wdog);
if (ret) {
--
2.33.0
From: Alexander Tsoy <[email protected]>
commit 763d92ed5dece7d439fc28a88b2d2728d525ffd9 upstream.
Add another device ID for JBL Quantum 400. It requires the same quirk as
other JBL Quantum devices.
Signed-off-by: Alexander Tsoy <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1897,6 +1897,7 @@ static const struct registration_quirk r
REG_QUIRK_ENTRY(0x0951, 0x16ea, 2), /* Kingston HyperX Cloud Flight S */
REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2), /* JBL Quantum 600 */
REG_QUIRK_ENTRY(0x0ecb, 0x1f47, 2), /* JBL Quantum 800 */
+ REG_QUIRK_ENTRY(0x0ecb, 0x1f4c, 2), /* JBL Quantum 400 */
REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2), /* JBL Quantum 400 */
REG_QUIRK_ENTRY(0x0ecb, 0x203c, 2), /* JBL Quantum 600 */
REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2), /* JBL Quantum 800 */
From: Naohiro Aota <[email protected]>
[ Upstream commit 9586e67b911c95ba158fcc247b230e9c2d718623 ]
When dispatching a zone append write request to a SCSI zoned block device,
if the target zone of the request is already locked, the device driver will
return BLK_STS_ZONE_RESOURCE and the request will be pushed back to the
hctx dipatch queue. The queue will be marked as RESTART in
dd_finish_request() and restarted in __blk_mq_free_request(). However, this
restart applies to the hctx of the completed request. If the requeued
request is on a different hctx, dispatch will no be retried until another
request is submitted or the next periodic queue run triggers, leading to up
to 30 seconds latency for the requeued request.
Fix this problem by scheduling a queue restart similarly to the
BLK_STS_RESOURCE case or when we cannot get the budget.
Also, consolidate the checks into the "need_resource" variable to simplify
the condition.
Signed-off-by: Naohiro Aota <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Niklas Cassel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index eed9a4c1519df..69cc552c3dfc9 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1327,6 +1327,7 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list,
int errors, queued;
blk_status_t ret = BLK_STS_OK;
LIST_HEAD(zone_list);
+ bool needs_resource = false;
if (list_empty(list))
return false;
@@ -1372,6 +1373,8 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list,
queued++;
break;
case BLK_STS_RESOURCE:
+ needs_resource = true;
+ fallthrough;
case BLK_STS_DEV_RESOURCE:
blk_mq_handle_dev_resource(rq, list);
goto out;
@@ -1382,6 +1385,7 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list,
* accept.
*/
blk_mq_handle_zone_resource(rq, &zone_list);
+ needs_resource = true;
break;
default:
errors++;
@@ -1408,7 +1412,6 @@ out:
/* For non-shared tags, the RESTART check will suffice */
bool no_tag = prep == PREP_DISPATCH_NO_TAG &&
(hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED);
- bool no_budget_avail = prep == PREP_DISPATCH_NO_BUDGET;
blk_mq_release_budgets(q, nr_budgets);
@@ -1448,14 +1451,16 @@ out:
* If driver returns BLK_STS_RESOURCE and SCHED_RESTART
* bit is set, run queue after a delay to avoid IO stalls
* that could otherwise occur if the queue is idle. We'll do
- * similar if we couldn't get budget and SCHED_RESTART is set.
+ * similar if we couldn't get budget or couldn't lock a zone
+ * and SCHED_RESTART is set.
*/
needs_restart = blk_mq_sched_needs_restart(hctx);
+ if (prep == PREP_DISPATCH_NO_BUDGET)
+ needs_resource = true;
if (!needs_restart ||
(no_tag && list_empty_careful(&hctx->dispatch_wait.entry)))
blk_mq_run_hw_queue(hctx, true);
- else if (needs_restart && (ret == BLK_STS_RESOURCE ||
- no_budget_avail))
+ else if (needs_restart && needs_resource)
blk_mq_delay_run_hw_queue(hctx, BLK_MQ_RESOURCE_DELAY);
blk_mq_update_dispatch_busy(hctx, true);
--
2.33.0
From: Miklos Szeredi <[email protected]>
commit 712a951025c0667ff00b25afc360f74e639dfabe upstream.
It is possible to trigger a crash by splicing anon pipe bufs to the fuse
device.
The reason for this is that anon_pipe_buf_release() will reuse buf->page if
the refcount is 1, but that page might have already been stolen and its
flags modified (e.g. PG_lru added).
This happens in the unlikely case of fuse_dev_splice_write() getting around
to calling pipe_buf_release() after a page has been stolen, added to the
page cache and removed from the page cache.
Fix by calling pipe_buf_release() right after the page was inserted into
the page cache. In this case the page has an elevated refcount so any
release function will know that the page isn't reusable.
Reported-by: Frank Dinoff <[email protected]>
Link: https://lore.kernel.org/r/CAAmZXrsGg2xsP1CK+cbuEMumtrqdvD-NKnWzhNcvn71RV3c1yw@mail.gmail.com/
Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device")
Cc: <[email protected]> # v2.6.35
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -851,6 +851,12 @@ static int fuse_try_move_page(struct fus
goto out_put_old;
}
+ /*
+ * Release while we have extra ref on stolen page. Otherwise
+ * anon_pipe_buf_release() might think the page can be reused.
+ */
+ pipe_buf_release(cs->pipe, buf);
+
get_page(newpage);
if (!(buf->flags & PIPE_BUF_FLAG_LRU))
@@ -2035,8 +2041,12 @@ static ssize_t fuse_dev_splice_write(str
pipe_lock(pipe);
out_free:
- for (idx = 0; idx < nbuf; idx++)
- pipe_buf_release(pipe, &bufs[idx]);
+ for (idx = 0; idx < nbuf; idx++) {
+ struct pipe_buffer *buf = &bufs[idx];
+
+ if (buf->ops)
+ pipe_buf_release(pipe, buf);
+ }
pipe_unlock(pipe);
kvfree(bufs);
From: yangerkun <[email protected]>
commit 1811bc401aa58c7bdb0df3205aa6613b49d32127 upstream.
After we drop i_data sem, we need to reload the ext4_ext_path
structure since the extent tree can change once i_data_sem is
released.
This addresses the BUG:
[52117.465187] ------------[ cut here ]------------
[52117.465686] kernel BUG at fs/ext4/extents.c:1756!
...
[52117.478306] Call Trace:
[52117.478565] ext4_ext_shift_extents+0x3ee/0x710
[52117.479020] ext4_fallocate+0x139c/0x1b40
[52117.479405] ? __do_sys_newfstat+0x6b/0x80
[52117.479805] vfs_fallocate+0x151/0x4b0
[52117.480177] ksys_fallocate+0x4a/0xa0
[52117.480533] __x64_sys_fallocate+0x22/0x30
[52117.480930] do_syscall_64+0x35/0x80
[52117.481277] entry_SYSCALL_64_after_hwframe+0x44/0xae
[52117.481769] RIP: 0033:0x7fa062f855ca
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: yangerkun <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/extents.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -5005,8 +5005,11 @@ ext4_ext_shift_path_extents(struct ext4_
restart_credits = ext4_writepage_trans_blocks(inode);
err = ext4_datasem_ensure_credits(handle, inode, credits,
restart_credits, 0);
- if (err)
+ if (err) {
+ if (err > 0)
+ err = -EAGAIN;
goto out;
+ }
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
@@ -5080,6 +5083,7 @@ ext4_ext_shift_extents(struct inode *ino
int ret = 0, depth;
struct ext4_extent *extent;
ext4_lblk_t stop, *iterator, ex_start, ex_end;
+ ext4_lblk_t tmp = EXT_MAX_BLOCKS;
/* Let path point to the last extent */
path = ext4_find_extent(inode, EXT_MAX_BLOCKS - 1, NULL,
@@ -5133,11 +5137,15 @@ ext4_ext_shift_extents(struct inode *ino
* till we reach stop. In case of right shift, iterator points to stop
* and it is decreased till we reach start.
*/
+again:
if (SHIFT == SHIFT_LEFT)
iterator = &start;
else
iterator = &stop;
+ if (tmp != EXT_MAX_BLOCKS)
+ *iterator = tmp;
+
/*
* Its safe to start updating extents. Start and stop are unsigned, so
* in case of right shift if extent with 0 block is reached, iterator
@@ -5166,6 +5174,7 @@ ext4_ext_shift_extents(struct inode *ino
}
}
+ tmp = *iterator;
if (SHIFT == SHIFT_LEFT) {
extent = EXT_LAST_EXTENT(path[depth].p_hdr);
*iterator = le32_to_cpu(extent->ee_block) +
@@ -5184,6 +5193,9 @@ ext4_ext_shift_extents(struct inode *ino
}
ret = ext4_ext_shift_path_extents(path, shift, inode,
handle, SHIFT);
+ /* iterator can be NULL which means we should break */
+ if (ret == -EAGAIN)
+ goto again;
if (ret)
break;
}
From: Tom Lendacky <[email protected]>
commit e7d445ab26db833d6640d4c9a08bee176777cc82 upstream.
When runtime support for converting between 4-level and 5-level pagetables
was added to the kernel, the SME code that built pagetables was updated
to use the pagetable functions, e.g. p4d_offset(), etc., in order to
simplify the code. However, the use of the pagetable functions in early
boot code requires the use of the USE_EARLY_PGTABLE_L5 #define in order to
ensure that the proper definition of pgtable_l5_enabled() is used.
Without the #define, pgtable_l5_enabled() is #defined as
cpu_feature_enabled(X86_FEATURE_LA57). In early boot, the CPU features
have not yet been discovered and populated, so pgtable_l5_enabled() will
return false even when 5-level paging is enabled. This causes the SME code
to always build 4-level pagetables to perform the in-place encryption.
If 5-level paging is enabled, switching to the SME pagetables results in
a page-fault that kills the boot.
Adding the #define results in pgtable_l5_enabled() using the
__pgtable_l5_enabled variable set in early boot and the SME code building
pagetables for the proper paging level.
Fixes: aad983913d77 ("x86/mm/encrypt: Simplify sme_populate_pgd() and sme_populate_pgd_large()")
Signed-off-by: Tom Lendacky <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: <[email protected]> # 4.18.x
Link: https://lkml.kernel.org/r/2cb8329655f5c753905812d951e212022a480475.1634318656.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/mem_encrypt_identity.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/x86/mm/mem_encrypt_identity.c
+++ b/arch/x86/mm/mem_encrypt_identity.c
@@ -27,6 +27,15 @@
#undef CONFIG_PARAVIRT_XXL
#undef CONFIG_PARAVIRT_SPINLOCKS
+/*
+ * This code runs before CPU feature bits are set. By default, the
+ * pgtable_l5_enabled() function uses bit X86_FEATURE_LA57 to determine if
+ * 5-level paging is active, so that won't work here. USE_EARLY_PGTABLE_L5
+ * is provided to handle this situation and, instead, use a variable that
+ * has been set by the early boot code.
+ */
+#define USE_EARLY_PGTABLE_L5
+
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/mem_encrypt.h>
From: yangerkun <[email protected]>
commit 4268496e48dc681cfa53b92357314b5d7221e625 upstream.
Like ext4_ext_rm_leaf, we can ensure that there are enough credits
before every call that will consume credits. As part of this fix we
fold the functionality of ext4_access_path() into
ext4_ext_shift_path_extents(). This change is needed as a preparation
for the next bugfix patch.
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: yangerkun <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/extents.c | 49 +++++++++++++++----------------------------------
1 file changed, 15 insertions(+), 34 deletions(-)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4971,36 +4971,6 @@ int ext4_get_es_cache(struct inode *inod
}
/*
- * ext4_access_path:
- * Function to access the path buffer for marking it dirty.
- * It also checks if there are sufficient credits left in the journal handle
- * to update path.
- */
-static int
-ext4_access_path(handle_t *handle, struct inode *inode,
- struct ext4_ext_path *path)
-{
- int credits, err;
-
- if (!ext4_handle_valid(handle))
- return 0;
-
- /*
- * Check if need to extend journal credits
- * 3 for leaf, sb, and inode plus 2 (bmap and group
- * descriptor) for each block group; assume two block
- * groups
- */
- credits = ext4_writepage_trans_blocks(inode);
- err = ext4_datasem_ensure_credits(handle, inode, 7, credits, 0);
- if (err < 0)
- return err;
-
- err = ext4_ext_get_access(handle, inode, path);
- return err;
-}
-
-/*
* ext4_ext_shift_path_extents:
* Shift the extents of a path structure lying between path[depth].p_ext
* and EXT_LAST_EXTENT(path[depth].p_hdr), by @shift blocks. @SHIFT tells
@@ -5014,6 +4984,7 @@ ext4_ext_shift_path_extents(struct ext4_
int depth, err = 0;
struct ext4_extent *ex_start, *ex_last;
bool update = false;
+ int credits, restart_credits;
depth = path->p_depth;
while (depth >= 0) {
@@ -5023,13 +4994,23 @@ ext4_ext_shift_path_extents(struct ext4_
return -EFSCORRUPTED;
ex_last = EXT_LAST_EXTENT(path[depth].p_hdr);
+ /* leaf + sb + inode */
+ credits = 3;
+ if (ex_start == EXT_FIRST_EXTENT(path[depth].p_hdr)) {
+ update = true;
+ /* extent tree + sb + inode */
+ credits = depth + 2;
+ }
- err = ext4_access_path(handle, inode, path + depth);
+ restart_credits = ext4_writepage_trans_blocks(inode);
+ err = ext4_datasem_ensure_credits(handle, inode, credits,
+ restart_credits, 0);
if (err)
goto out;
- if (ex_start == EXT_FIRST_EXTENT(path[depth].p_hdr))
- update = true;
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ goto out;
while (ex_start <= ex_last) {
if (SHIFT == SHIFT_LEFT) {
@@ -5060,7 +5041,7 @@ ext4_ext_shift_path_extents(struct ext4_
}
/* Update index too */
- err = ext4_access_path(handle, inode, path + depth);
+ err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto out;
From: Wang Wensheng <[email protected]>
commit c0317c0e87094f5b5782b6fdef5ae0a4b150496c upstream.
When the timer instance was add into ack_list but was not currently in
process, the user could stop it via snd_timer_stop1() without delete it
from the ack_list. Then the user could free the timer instance and when
it was actually processed UAF occurred.
This issue could be reproduced via testcase snd_timer01 in ltp - running
several instances of that testcase at the same time.
What I actually met was that the ack_list of the timer broken and the
kernel went into deadloop with irqoff. That could be detected by
hardlockup detector on board or when we run it on qemu, we could use gdb
to dump the ack_list when the console has no response.
To fix this issue, we delete the timer instance from ack_list and
active_list unconditionally in snd_timer_stop1().
Signed-off-by: Wang Wensheng <[email protected]>
Suggested-by: Takashi Iwai <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/timer.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -624,13 +624,13 @@ static int snd_timer_stop1(struct snd_ti
if (!timer)
return -EINVAL;
spin_lock_irqsave(&timer->lock, flags);
+ list_del_init(&timeri->ack_list);
+ list_del_init(&timeri->active_list);
if (!(timeri->flags & (SNDRV_TIMER_IFLG_RUNNING |
SNDRV_TIMER_IFLG_START))) {
result = -EBUSY;
goto unlock;
}
- list_del_init(&timeri->ack_list);
- list_del_init(&timeri->active_list);
if (timer->card && timer->card->shutdown)
goto unlock;
if (stop) {
From: Loic Poulain <[email protected]>
commit 960ae77f25631bbe4e3aafefe209b52e044baf31 upstream.
All wcn36xx controllers are supposed to support HT40 (and SGI40),
This doubles the maximum bitrate/throughput with compatible APs.
Tested with wcn3620 & wcn3680B.
Cc: [email protected]
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -134,7 +134,9 @@ static struct ieee80211_supported_band w
.cap = IEEE80211_HT_CAP_GRN_FLD |
IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_DSSSCCK40 |
- IEEE80211_HT_CAP_LSIG_TXOP_PROT,
+ IEEE80211_HT_CAP_LSIG_TXOP_PROT |
+ IEEE80211_HT_CAP_SGI_40 |
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
From: Loic Poulain <[email protected]>
commit a9e79b116cc4d0057e912be8f40b2c2e5bdc7c43 upstream.
This change fix the TX ack mechanism in various ways:
- For NO_ACK tagged packets, we don't need to wait for TX_ACK indication
and so are not subject to the single packet ack limitation. So we don't
have to stop the tx queue, and can call the tx status callback as soon
as DMA transfer has completed.
- Fix skb ownership/reference. Only start status indication timeout
once the DMA transfer has been completed. This avoids the skb to be
both referenced in the DMA tx ring and by the tx_ack_skb pointer,
preventing any use-after-free or double-free.
- This adds a sanity (paranoia?) check on the skb tx ack pointer.
- Resume TX queue if TX status tagged packet TX fails.
Cc: [email protected]
Fixes: fdf21cc37149 ("wcn36xx: Add TX ack support")
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 37 ++++++++++++--------------------
drivers/net/wireless/ath/wcn36xx/txrx.c | 31 +++++---------------------
2 files changed, 21 insertions(+), 47 deletions(-)
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -403,8 +403,21 @@ static void reap_tx_dxes(struct wcn36xx
dma_unmap_single(wcn->dev, ctl->desc->src_addr_l,
ctl->skb->len, DMA_TO_DEVICE);
info = IEEE80211_SKB_CB(ctl->skb);
- if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) {
- /* Keep frame until TX status comes */
+ if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) {
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK) {
+ info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED;
+ ieee80211_tx_status_irqsafe(wcn->hw, ctl->skb);
+ } else {
+ /* Wait for the TX ack indication or timeout... */
+ spin_lock(&wcn->dxe_lock);
+ if (WARN_ON(wcn->tx_ack_skb))
+ ieee80211_free_txskb(wcn->hw, wcn->tx_ack_skb);
+ wcn->tx_ack_skb = ctl->skb; /* Tracking ref */
+ mod_timer(&wcn->tx_ack_timer, jiffies + HZ / 10);
+ spin_unlock(&wcn->dxe_lock);
+ }
+ /* do not free, ownership transferred to mac80211 status cb */
+ } else {
ieee80211_free_txskb(wcn->hw, ctl->skb);
}
@@ -426,7 +439,6 @@ static irqreturn_t wcn36xx_irq_tx_comple
{
struct wcn36xx *wcn = (struct wcn36xx *)dev;
int int_src, int_reason;
- bool transmitted = false;
wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_INT_SRC_RAW_REG, &int_src);
@@ -466,7 +478,6 @@ static irqreturn_t wcn36xx_irq_tx_comple
if (int_reason & (WCN36XX_CH_STAT_INT_DONE_MASK |
WCN36XX_CH_STAT_INT_ED_MASK)) {
reap_tx_dxes(wcn, &wcn->dxe_tx_h_ch);
- transmitted = true;
}
}
@@ -479,7 +490,6 @@ static irqreturn_t wcn36xx_irq_tx_comple
WCN36XX_DXE_0_INT_CLR,
WCN36XX_INT_MASK_CHAN_TX_L);
-
if (int_reason & WCN36XX_CH_STAT_INT_ERR_MASK ) {
wcn36xx_dxe_write_register(wcn,
WCN36XX_DXE_0_INT_ERR_CLR,
@@ -507,25 +517,8 @@ static irqreturn_t wcn36xx_irq_tx_comple
if (int_reason & (WCN36XX_CH_STAT_INT_DONE_MASK |
WCN36XX_CH_STAT_INT_ED_MASK)) {
reap_tx_dxes(wcn, &wcn->dxe_tx_l_ch);
- transmitted = true;
- }
- }
-
- spin_lock(&wcn->dxe_lock);
- if (wcn->tx_ack_skb && transmitted) {
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(wcn->tx_ack_skb);
-
- /* TX complete, no need to wait for 802.11 ack indication */
- if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS &&
- info->flags & IEEE80211_TX_CTL_NO_ACK) {
- info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED;
- del_timer(&wcn->tx_ack_timer);
- ieee80211_tx_status_irqsafe(wcn->hw, wcn->tx_ack_skb);
- wcn->tx_ack_skb = NULL;
- ieee80211_wake_queues(wcn->hw);
}
}
- spin_unlock(&wcn->dxe_lock);
return IRQ_HANDLED;
}
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -502,10 +502,11 @@ int wcn36xx_start_tx(struct wcn36xx *wcn
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct wcn36xx_vif *vif_priv = NULL;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- unsigned long flags;
bool is_low = ieee80211_is_data(hdr->frame_control);
bool bcast = is_broadcast_ether_addr(hdr->addr1) ||
is_multicast_ether_addr(hdr->addr1);
+ bool ack_ind = (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) &&
+ !(info->flags & IEEE80211_TX_CTL_NO_ACK);
struct wcn36xx_tx_bd bd;
int ret;
@@ -521,30 +522,16 @@ int wcn36xx_start_tx(struct wcn36xx *wcn
bd.dpu_rf = WCN36XX_BMU_WQ_TX;
- if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) {
+ if (unlikely(ack_ind)) {
wcn36xx_dbg(WCN36XX_DBG_DXE, "TX_ACK status requested\n");
- spin_lock_irqsave(&wcn->dxe_lock, flags);
- if (wcn->tx_ack_skb) {
- spin_unlock_irqrestore(&wcn->dxe_lock, flags);
- wcn36xx_warn("tx_ack_skb already set\n");
- return -EINVAL;
- }
-
- wcn->tx_ack_skb = skb;
- spin_unlock_irqrestore(&wcn->dxe_lock, flags);
-
/* Only one at a time is supported by fw. Stop the TX queues
* until the ack status gets back.
*/
ieee80211_stop_queues(wcn->hw);
- /* TX watchdog if no TX irq or ack indication received */
- mod_timer(&wcn->tx_ack_timer, jiffies + HZ / 10);
-
/* Request ack indication from the firmware */
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
- bd.tx_comp = 1;
+ bd.tx_comp = 1;
}
/* Data frames served first*/
@@ -558,14 +545,8 @@ int wcn36xx_start_tx(struct wcn36xx *wcn
bd.tx_bd_sign = 0xbdbdbdbd;
ret = wcn36xx_dxe_tx_frame(wcn, vif_priv, &bd, skb, is_low);
- if (ret && (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) {
- /* If the skb has not been transmitted,
- * don't keep a reference to it.
- */
- spin_lock_irqsave(&wcn->dxe_lock, flags);
- wcn->tx_ack_skb = NULL;
- spin_unlock_irqrestore(&wcn->dxe_lock, flags);
-
+ if (unlikely(ret && ack_ind)) {
+ /* If the skb has not been transmitted, resume TX queue */
ieee80211_wake_queues(wcn->hw);
}
From: Janghyub Seo <[email protected]>
[ Upstream commit 72f898ca0ab85fde6facf78b14d9f67a4a7b32d1 ]
This patch makes the driver r8169 pick up device Realtek Semiconductor Co.
, Ltd. Device [10ec:8162].
Signed-off-by: Janghyub Seo <[email protected]>
Suggested-by: Rushab Shah <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/realtek/r8169_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 30be18bac8063..5eac3f494d9e9 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -157,6 +157,7 @@ static const struct pci_device_id rtl8169_pci_tbl[] = {
{ PCI_VDEVICE(REALTEK, 0x8129) },
{ PCI_VDEVICE(REALTEK, 0x8136), RTL_CFG_NO_GBIT },
{ PCI_VDEVICE(REALTEK, 0x8161) },
+ { PCI_VDEVICE(REALTEK, 0x8162) },
{ PCI_VDEVICE(REALTEK, 0x8167) },
{ PCI_VDEVICE(REALTEK, 0x8168) },
{ PCI_VDEVICE(NCUBE, 0x8168) },
--
2.33.0
From: Austin Kim <[email protected]>
commit 32ba540f3c2a7ef61ed5a577ce25069a3d714fc9 upstream.
The evm_fixmode is only configurable by command-line option and it is never
modified outside initcalls, so declaring it with __ro_after_init is better.
Signed-off-by: Austin Kim <[email protected]>
Cc: [email protected]
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/integrity/evm/evm_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/security/integrity/evm/evm_main.c
+++ b/security/integrity/evm/evm_main.c
@@ -54,7 +54,7 @@ static struct xattr_list evm_config_defa
LIST_HEAD(evm_config_xattrnames);
-static int evm_fixmode;
+static int evm_fixmode __ro_after_init;
static int __init evm_set_fixmode(char *str)
{
if (strncmp(str, "fix", 3) == 0)
From: Loic Poulain <[email protected]>
commit d3fd2c95c1c13ec217d43ebef3c61cfa00a6cd37 upstream.
We observe unexpected connection drops with some APs due to
non-acked mac80211 generated null data frames (keep-alive).
After debugging and capture, we noticed that null frames are
submitted at standard data bitrate and that the given APs are
in trouble with that.
After setting the null frame bitrate to control bitrate, all
null frames are acked as expected and connection is maintained.
Not sure if it's a requirement of the specification, but it seems
the right thing to do anyway, null frames are mostly used for control
purpose (power-saving, keep-alive...), and submitting them with
a slower/simpler bitrate/modulation is more robust.
Cc: [email protected]
Fixes: 512b191d9652 ("wcn36xx: Fix TX data path")
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -429,6 +429,7 @@ static void wcn36xx_set_tx_data(struct w
if (ieee80211_is_any_nullfunc(hdr->frame_control)) {
/* Don't use a regular queue for null packet (no ampdu) */
bd->queue_id = WCN36XX_TX_U_WQ_ID;
+ bd->bd_rate = WCN36XX_BD_RATE_CTRL;
}
if (bcast) {
From: Lukas Wunner <[email protected]>
commit 046178e726c2977d686ba5e07105d5a6685c830e upstream.
IFB originally depended on NET_CLS_ACT for traffic redirection.
But since v4.5, that may be achieved with NFT_FWD_NETDEV as well.
Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: <[email protected]> # v4.5+: bcfabee1afd9: netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
Cc: <[email protected]> # v4.5+
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -148,7 +148,7 @@ config NET_FC
config IFB
tristate "Intermediate Functional Block support"
- depends on NET_CLS_ACT
+ depends on NET_ACT_MIRRED || NFT_FWD_NETDEV
select NET_REDIRECT
help
This is an intermediate driver that allows sharing of
From: Johan Hovold <[email protected]>
commit 2e9be536a213e838daed6ba42024dd68954ac061 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 605bebe23bf6 ("[PATCH] Add rtl8187 wireless driver")
Cc: [email protected] # 2.6.23
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
@@ -28,7 +28,7 @@ u8 rtl818x_ioread8_idx(struct rtl8187_pr
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits8, sizeof(val), 500);
val = priv->io_dmabuf->bits8;
mutex_unlock(&priv->io_mutex);
@@ -45,7 +45,7 @@ u16 rtl818x_ioread16_idx(struct rtl8187_
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits16, sizeof(val), 500);
val = priv->io_dmabuf->bits16;
mutex_unlock(&priv->io_mutex);
@@ -62,7 +62,7 @@ u32 rtl818x_ioread32_idx(struct rtl8187_
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits32, sizeof(val), 500);
val = priv->io_dmabuf->bits32;
mutex_unlock(&priv->io_mutex);
@@ -79,7 +79,7 @@ void rtl818x_iowrite8_idx(struct rtl8187
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits8, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -93,7 +93,7 @@ void rtl818x_iowrite16_idx(struct rtl818
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits16, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -107,7 +107,7 @@ void rtl818x_iowrite32_idx(struct rtl818
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits32, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -183,7 +183,7 @@ static void rtl8225_write_8051(struct ie
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
- HZ / 2);
+ 500);
mutex_unlock(&priv->io_mutex);
From: Johan Hovold <[email protected]>
commit 5286132324230168d3fab6ffc16bfd7de85bdfb4 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 4db66499df91 ("ath10k: add initial USB support")
Cc: [email protected] # 4.14
Cc: Erik Stromdahl <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -525,7 +525,7 @@ static int ath10k_usb_submit_ctrl_in(str
req,
USB_DIR_IN | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, value, index, buf,
- size, 2 * HZ);
+ size, 2000);
if (ret < 0) {
ath10k_warn(ar, "Failed to read usb control message: %d\n",
From: Johan Hovold <[email protected]>
commit a006acb931317aad3a8dd41333ebb0453caf49b8 upstream.
Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 4db66499df91 ("ath10k: add initial USB support")
Cc: [email protected] # 4.14
Cc: Erik Stromdahl <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/usb.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -853,6 +853,11 @@ static int ath10k_usb_setup_pipe_resourc
le16_to_cpu(endpoint->wMaxPacketSize),
endpoint->bInterval);
}
+
+ /* Ignore broken descriptors. */
+ if (usb_endpoint_maxp(endpoint) == 0)
+ continue;
+
urbcount = 0;
pipe_num =
From: Ingmar Klein <[email protected]>
commit e3f4bd3462f6f796594ecc0dda7144ed2d1e5a26 upstream.
When passing the Atheros QCA6174 through to a virtual machine, the VM hangs
at the point where the ath10k driver loads.
Add a quirk to avoid bus resets on this device, which avoids the hang.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ingmar Klein <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Pali Rohár <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3584,6 +3584,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003e, quirk_no_bus_reset);
/*
* Root port on some Cavium CN8xxx chips do not successfully complete a bus
From: Li Zhang <[email protected]>
commit 5d03dbebba2594d2e6fbf3b5dd9060c5a835de3b upstream.
Reported bug: https://github.com/kdave/btrfs-progs/issues/389
There's a problem with scrub reporting aborted status but returning
error code 0, on a filesystem with missing and readded device.
Roughly these steps:
- mkfs -d raid1 dev1 dev2
- fill with data
- unmount
- make dev1 disappear
- mount -o degraded
- copy more data
- make dev1 appear again
Running scrub afterwards reports that the command was aborted, but the
system log message says the exit code was 0.
It seems that the cause of the error is decrementing
fs_devices->missing_devices but not clearing device->dev_state. Every
time we umount filesystem, it would call close_ctree, And it would
eventually involve btrfs_close_one_device to close the device, but it
only decrements fs_devices->missing_devices but does not clear the
device BTRFS_DEV_STATE_MISSING bit. Worse, this bug will cause Integer
Overflow, because every time umount, fs_devices->missing_devices will
decrease. If fs_devices->missing_devices value hit 0, it would overflow.
With added debugging:
loop1: detected capacity change from 0 to 20971520
BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 1 transid 21 /dev/loop1 scanned by systemd-udevd (2311)
loop2: detected capacity change from 0 to 20971520
BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 2 transid 17 /dev/loop2 scanned by systemd-udevd (2313)
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): using free space tree
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): using free space tree
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 0
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): using free space tree
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 18446744073709551615
BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 18446744073709551615
If fs_devices->missing_devices is 0, next time it would be 18446744073709551615
After apply this patch, the fs_devices->missing_devices seems to be
right:
$ truncate -s 10g test1
$ truncate -s 10g test2
$ losetup /dev/loop1 test1
$ losetup /dev/loop2 test2
$ mkfs.btrfs -draid1 -mraid1 /dev/loop1 /dev/loop2 -f
$ losetup -d /dev/loop2
$ mount -o degraded /dev/loop1 /mnt/1
$ umount /mnt/1
$ mount -o degraded /dev/loop1 /mnt/1
$ umount /mnt/1
$ mount -o degraded /dev/loop1 /mnt/1
$ umount /mnt/1
$ dmesg
loop1: detected capacity change from 0 to 20971520
loop2: detected capacity change from 0 to 20971520
BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 1 transid 5 /dev/loop1 scanned by mkfs.btrfs (1863)
BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 2 transid 5 /dev/loop2 scanned by mkfs.btrfs (1863)
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): disk space caching is enabled
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1
BTRFS info (device loop1): checking UUID tree
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): disk space caching is enabled
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): disk space caching is enabled
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1
CC: [email protected] # 4.19+
Signed-off-by: Li Zhang <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/volumes.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1133,8 +1133,10 @@ static void btrfs_close_one_device(struc
if (device->devid == BTRFS_DEV_REPLACE_DEVID)
clear_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state);
- if (test_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state))
+ if (test_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state)) {
+ clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state);
fs_devices->missing_devices--;
+ }
btrfs_close_bdev(device);
if (device->bdev) {
From: Rafael J. Wysocki <[email protected]>
commit 928265e3601cde78c7e0a3e518a93b27defed3b1 upstream.
There is no reason to allow "syscore" devices to runtime-suspend
during system-wide PM transitions, because they are subject to the
same possible failure modes as any other devices in that respect.
Accordingly, change device_prepare() and device_complete() to call
pm_runtime_get_noresume() and pm_runtime_put(), respectively, for
"syscore" devices too.
Fixes: 057d51a1268f ("Merge branch 'pm-sleep'")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Cc: 3.10+ <[email protected]> # 3.10+
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/main.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1053,7 +1053,7 @@ static void device_complete(struct devic
const char *info = NULL;
if (dev->power.syscore)
- return;
+ goto out;
device_lock(dev);
@@ -1083,6 +1083,7 @@ static void device_complete(struct devic
device_unlock(dev);
+out:
pm_runtime_put(dev);
}
@@ -1796,9 +1797,6 @@ static int device_prepare(struct device
int (*callback)(struct device *) = NULL;
int ret = 0;
- if (dev->power.syscore)
- return 0;
-
/*
* If a device's parent goes into runtime suspend at the wrong time,
* it won't be possible to resume the device. To prevent this we
@@ -1807,6 +1805,9 @@ static int device_prepare(struct device
*/
pm_runtime_get_noresume(dev);
+ if (dev->power.syscore)
+ return 0;
+
device_lock(dev);
dev->power.wakeup_path = false;
From: Jonas Dreßler <[email protected]>
commit 8e3e59c31fea5de95ffc52c46f0c562c39f20c59 upstream.
It seems that the PCIe+USB firmware (latest version 15.68.19.p21) of the
88W8897 card sometimes ignores or misses when we try to wake it up by
writing to the firmware status register. This leads to the firmware
wakeup timeout expiring and the driver resetting the card because we
assume the firmware has hung up or crashed.
Turns out that the firmware actually didn't hang up, but simply "missed"
our wakeup request and didn't send us an interrupt with an AWAKE event.
Trying again to read the firmware status register after a short timeout
usually makes the firmware wake up as expected, so add a small retry
loop to mwifiex_pm_wakeup_card() that looks at the interrupt status to
check whether the card woke up.
The number of tries and timeout lengths for this were determined
experimentally: The firmware usually takes about 500 us to wake up
after we attempt to read the status register. In some cases where the
firmware is very busy (for example while doing a bluetooth scan) it
might even miss our requests for multiple milliseconds, which is why
after 15 tries the waiting time gets increased to 10 ms. The maximum
number of tries it took to wake the firmware when testing this was
around 20, so a maximum number of 50 tries should give us plenty of
safety margin.
Here's a reproducer for those firmware wakeup failures I've found:
1) Make sure wifi powersaving is enabled (iw dev wlp1s0 set power_save on)
2) Connect to any wifi network (makes firmware go into wifi powersaving
mode, not deep sleep)
3) Make sure bluetooth is turned off (to ensure the firmware actually
enters powersave mode and doesn't keep the radio active doing bluetooth
stuff)
4) To confirm that wifi powersaving is entered ping a device on the LAN,
pings should be a few ms higher than without powersaving
5) Run "while true; do iwconfig; sleep 0.0001; done", this wakes and
suspends the firmware extremely often
6) Wait until things explode, for me it consistently takes <5 minutes
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: [email protected]
Signed-off-by: Jonas Dreßler <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -17,6 +17,7 @@
* this warranty disclaimer.
*/
+#include <linux/iopoll.h>
#include <linux/firmware.h>
#include "decl.h"
@@ -637,11 +638,15 @@ static void mwifiex_delay_for_sleep_cook
"max count reached while accessing sleep cookie\n");
}
+#define N_WAKEUP_TRIES_SHORT_INTERVAL 15
+#define N_WAKEUP_TRIES_LONG_INTERVAL 35
+
/* This function wakes up the card by reading fw_status register. */
static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter)
{
struct pcie_service_card *card = adapter->card;
const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
+ int retval;
mwifiex_dbg(adapter, EVENT,
"event: Wakeup device...\n");
@@ -649,11 +654,24 @@ static int mwifiex_pm_wakeup_card(struct
if (reg->sleep_cookie)
mwifiex_pcie_dev_wakeup_delay(adapter);
- /* Accessing fw_status register will wakeup device */
- if (mwifiex_write_reg(adapter, reg->fw_status, FIRMWARE_READY_PCIE)) {
- mwifiex_dbg(adapter, ERROR,
- "Writing fw_status register failed\n");
- return -1;
+ /* The 88W8897 PCIe+USB firmware (latest version 15.68.19.p21) sometimes
+ * appears to ignore or miss our wakeup request, so we continue trying
+ * until we receive an interrupt from the card.
+ */
+ if (read_poll_timeout(mwifiex_write_reg, retval,
+ READ_ONCE(adapter->int_status) != 0,
+ 500, 500 * N_WAKEUP_TRIES_SHORT_INTERVAL,
+ false,
+ adapter, reg->fw_status, FIRMWARE_READY_PCIE)) {
+ if (read_poll_timeout(mwifiex_write_reg, retval,
+ READ_ONCE(adapter->int_status) != 0,
+ 10000, 10000 * N_WAKEUP_TRIES_LONG_INTERVAL,
+ false,
+ adapter, reg->fw_status, FIRMWARE_READY_PCIE)) {
+ mwifiex_dbg(adapter, ERROR,
+ "Firmware didn't wake up\n");
+ return -EIO;
+ }
}
if (reg->sleep_cookie) {
From: Dongli Zhang <[email protected]>
[ Upstream commit 9159f102402a64ac85e676b75cc1f9c62c5b4b73 ]
The netif_device_detach() conditionally stops all tx queues if the queues
are running. There is no need to call netif_tx_stop_all_queues() again.
Signed-off-by: Dongli Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 336504b7531d9..932a39945cc62 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -3765,7 +3765,6 @@ vmxnet3_suspend(struct device *device)
vmxnet3_free_intr_resources(adapter);
netif_device_detach(netdev);
- netif_tx_stop_all_queues(netdev);
/* Create wake-up filters. */
pmConf = adapter->pm_conf;
--
2.33.0
From: Jonas Dreßler <[email protected]>
commit e5f4eb8223aa740237cd463246a7debcddf4eda1 upstream.
On the 88W8897 PCIe+USB card the firmware randomly crashes after setting
the TX ring write pointer. The issue is present in the latest firmware
version 15.68.19.p21 of the PCIe+USB card.
Those firmware crashes can be worked around by reading any PCI register
of the card after setting that register, so read the PCI_VENDOR_ID
register here. The reason this works is probably because we keep the bus
from entering an ASPM state for a bit longer, because that's what causes
the cards firmware to crash.
This fixes a bug where during RX/TX traffic and with ASPM L1 substates
enabled (the specific substates where the issue happens appear to be
platform dependent), the firmware crashes and eventually a command
timeout appears in the logs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: [email protected]
Signed-off-by: Jonas Dreßler <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -1480,6 +1480,14 @@ mwifiex_pcie_send_data(struct mwifiex_ad
ret = -1;
goto done_unmap;
}
+
+ /* The firmware (latest version 15.68.19.p21) of the 88W8897 PCIe+USB card
+ * seems to crash randomly after setting the TX ring write pointer when
+ * ASPM powersaving is enabled. A workaround seems to be keeping the bus
+ * busy by reading a random register afterwards.
+ */
+ mwifiex_read_reg(adapter, PCI_VENDOR_ID, &rx_val);
+
if ((mwifiex_pcie_txbd_not_full(card)) &&
tx_param->next_pkt_len) {
/* have more packets and TxBD still can hold more */
From: Mario <[email protected]>
[ Upstream commit 61b1d445f3bfe4c3ba4335ceeb7e8ba688fd31e2 ]
Fixes screen orientation for GPD Win 3 handheld gaming console.
Signed-off-by: Mario Risoldi <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 30c17a76f49ae..e1b2ce4921ae7 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -191,6 +191,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
},
.driver_data = (void *)&gpd_win2,
+ }, { /* GPD Win 3 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "GPD"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "G1618-03")
+ },
+ .driver_data = (void *)&lcd720x1280_rightside_up,
}, { /* I.T.Works TW891 */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
--
2.33.0
From: Wen Gu <[email protected]>
[ Upstream commit f3a3a0fe0b644582fa5d83dd94b398f99fc57914 ]
There should use TCPF_SYN_RECV instead of TCP_SYN_RECV.
Signed-off-by: Wen Gu <[email protected]>
Reviewed-by: Tony Lu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/af_smc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 030d7f30b13fe..cc2af94e74507 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1018,7 +1018,7 @@ static void smc_connect_work(struct work_struct *work)
if (smc->clcsock->sk->sk_err) {
smc->sk.sk_err = smc->clcsock->sk->sk_err;
} else if ((1 << smc->clcsock->sk->sk_state) &
- (TCPF_SYN_SENT | TCP_SYN_RECV)) {
+ (TCPF_SYN_SENT | TCPF_SYN_RECV)) {
rc = sk_stream_wait_connect(smc->clcsock->sk, &timeo);
if ((rc == -EPIPE) &&
((1 << smc->clcsock->sk->sk_state) &
--
2.33.0
From: Tony Lu <[email protected]>
[ Upstream commit c4a146c7cf5e8ad76231523b174d161bf152c6e7 ]
The value of llc_testlink_time is set to the value stored in
net->ipv4.sysctl_tcp_keepalive_time when linkgroup init. The value of
sysctl_tcp_keepalive_time is already jiffies, so we don't need to
multiply by HZ, which would cause smc_link->llc_testlink_time overflow,
and test_link send flood.
Signed-off-by: Tony Lu <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Reviewed-by: Wen Gu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/smc_llc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c
index 2e7560eba9812..d8fe4e1f24d1f 100644
--- a/net/smc/smc_llc.c
+++ b/net/smc/smc_llc.c
@@ -1787,7 +1787,7 @@ void smc_llc_link_active(struct smc_link *link)
link->smcibdev->ibdev->name, link->ibport);
link->state = SMC_LNK_ACTIVE;
if (link->lgr->llc_testlink_time) {
- link->llc_testlink_time = link->lgr->llc_testlink_time * HZ;
+ link->llc_testlink_time = link->lgr->llc_testlink_time;
schedule_delayed_work(&link->llc_testlink_wrk,
link->llc_testlink_time);
}
--
2.33.0
From: Yu Xiao <[email protected]>
[ Upstream commit 90a881fc352a953f1c8beb61977a2db0818157d4 ]
MTU change is refused whenever the value of new MTU is bigger than
the max packet bytes that fits in NFP Cluster Target Memory (CTM).
However, an eBPF program doesn't always need to access the whole
packet data.
The maximum direct packet access (DPA) offset has always been
caculated by verifier and stored in the max_pkt_offset field of prog
aux data.
Signed-off-by: Yu Xiao <[email protected]>
Reviewed-by: Yinjun Zhang <[email protected]>
Reviewed-by: Niklas Soderlund <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/netronome/nfp/bpf/main.c | 16 +++++++++++-----
drivers/net/ethernet/netronome/nfp/bpf/main.h | 2 ++
.../net/ethernet/netronome/nfp/bpf/offload.c | 17 +++++++++++++----
3 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c
index 11c83a99b0140..f469950c72657 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/main.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c
@@ -182,15 +182,21 @@ static int
nfp_bpf_check_mtu(struct nfp_app *app, struct net_device *netdev, int new_mtu)
{
struct nfp_net *nn = netdev_priv(netdev);
- unsigned int max_mtu;
+ struct nfp_bpf_vnic *bv;
+ struct bpf_prog *prog;
if (~nn->dp.ctrl & NFP_NET_CFG_CTRL_BPF)
return 0;
- max_mtu = nn_readb(nn, NFP_NET_CFG_BPF_INL_MTU) * 64 - 32;
- if (new_mtu > max_mtu) {
- nn_info(nn, "BPF offload active, MTU over %u not supported\n",
- max_mtu);
+ if (nn->xdp_hw.prog) {
+ prog = nn->xdp_hw.prog;
+ } else {
+ bv = nn->app_priv;
+ prog = bv->tc_prog;
+ }
+
+ if (nfp_bpf_offload_check_mtu(nn, prog, new_mtu)) {
+ nn_info(nn, "BPF offload active, potential packet access beyond hardware packet boundary");
return -EBUSY;
}
return 0;
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.h b/drivers/net/ethernet/netronome/nfp/bpf/main.h
index fac9c6f9e197b..c74620fcc539c 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/main.h
+++ b/drivers/net/ethernet/netronome/nfp/bpf/main.h
@@ -560,6 +560,8 @@ bool nfp_is_subprog_start(struct nfp_insn_meta *meta);
void nfp_bpf_jit_prepare(struct nfp_prog *nfp_prog);
int nfp_bpf_jit(struct nfp_prog *prog);
bool nfp_bpf_supported_opcode(u8 code);
+bool nfp_bpf_offload_check_mtu(struct nfp_net *nn, struct bpf_prog *prog,
+ unsigned int mtu);
int nfp_verify_insn(struct bpf_verifier_env *env, int insn_idx,
int prev_insn_idx);
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/offload.c b/drivers/net/ethernet/netronome/nfp/bpf/offload.c
index 53851853562c6..9d97cd281f18e 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/offload.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/offload.c
@@ -481,19 +481,28 @@ int nfp_bpf_event_output(struct nfp_app_bpf *bpf, const void *data,
return 0;
}
+bool nfp_bpf_offload_check_mtu(struct nfp_net *nn, struct bpf_prog *prog,
+ unsigned int mtu)
+{
+ unsigned int fw_mtu, pkt_off;
+
+ fw_mtu = nn_readb(nn, NFP_NET_CFG_BPF_INL_MTU) * 64 - 32;
+ pkt_off = min(prog->aux->max_pkt_offset, mtu);
+
+ return fw_mtu < pkt_off;
+}
+
static int
nfp_net_bpf_load(struct nfp_net *nn, struct bpf_prog *prog,
struct netlink_ext_ack *extack)
{
struct nfp_prog *nfp_prog = prog->aux->offload->dev_priv;
- unsigned int fw_mtu, pkt_off, max_stack, max_prog_len;
+ unsigned int max_stack, max_prog_len;
dma_addr_t dma_addr;
void *img;
int err;
- fw_mtu = nn_readb(nn, NFP_NET_CFG_BPF_INL_MTU) * 64 - 32;
- pkt_off = min(prog->aux->max_pkt_offset, nn->dp.netdev->mtu);
- if (fw_mtu < pkt_off) {
+ if (nfp_bpf_offload_check_mtu(nn, prog, nn->dp.netdev->mtu)) {
NL_SET_ERR_MSG_MOD(extack, "BPF offload not supported with potential packet access beyond HW packet split boundary");
return -EOPNOTSUPP;
}
--
2.33.0
From: Meng Li <[email protected]>
commit e775eb9fc2a4107f03222fa48bc95c2c82427e64 upstream.
When enable debug kernel configs,there will be calltrace as below:
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x20/0x30
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x24/0x30
dump_stack+0xf0/0x13c
check_preemption_disabled+0x100/0x110
debug_smp_processor_id+0x20/0x30
dpaa2_io_query_fq_count+0xdc/0x154
dpaa2_eth_stop+0x144/0x314
__dev_close_many+0xdc/0x160
__dev_change_flags+0xe8/0x220
dev_change_flags+0x30/0x70
ic_close_devs+0x50/0x78
ip_auto_config+0xed0/0xf10
do_one_initcall+0xac/0x460
kernel_init_freeable+0x30c/0x378
kernel_init+0x20/0x128
ret_from_fork+0x10/0x38
Based on comment in the context, it doesn't matter whether
preemption is disable or not. So, replace smp_processor_id()
with raw_smp_processor_id() to avoid above call trace.
Fixes: c89105c9b390 ("staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl")
Cc: [email protected]
Signed-off-by: Meng Li <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soc/fsl/dpio/dpio-service.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -59,7 +59,7 @@ static inline struct dpaa2_io *service_s
* potentially being migrated away.
*/
if (cpu < 0)
- cpu = smp_processor_id();
+ cpu = raw_smp_processor_id();
/* If a specific cpu was requested, pick it up immediately */
return dpio_by_cpu[cpu];
From: Christoph Hellwig <[email protected]>
[ Upstream commit 42f2611cc1738b201701e717246e11e86bef4e1e ]
RDMA ULPs should only perform DMA through the ib_dma_* API instead of
using the hidden dma_device directly. In addition using the dma coherent
API family that dmapool is a part of can be very ineffcient on plaforms
that are not DMA coherent. Switch to use slab allocations and the
ib_dma_* APIs instead.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/rds/ib.c | 10 ----
net/rds/ib.h | 6 ---
net/rds/ib_cm.c | 128 ++++++++++++++++++++++++++++------------------
net/rds/ib_recv.c | 18 +++++--
net/rds/ib_send.c | 8 +++
5 files changed, 101 insertions(+), 69 deletions(-)
diff --git a/net/rds/ib.c b/net/rds/ib.c
index deecbdcdae84e..24c9a9005a6fb 100644
--- a/net/rds/ib.c
+++ b/net/rds/ib.c
@@ -30,7 +30,6 @@
* SOFTWARE.
*
*/
-#include <linux/dmapool.h>
#include <linux/kernel.h>
#include <linux/in.h>
#include <linux/if.h>
@@ -108,7 +107,6 @@ static void rds_ib_dev_free(struct work_struct *work)
rds_ib_destroy_mr_pool(rds_ibdev->mr_1m_pool);
if (rds_ibdev->pd)
ib_dealloc_pd(rds_ibdev->pd);
- dma_pool_destroy(rds_ibdev->rid_hdrs_pool);
list_for_each_entry_safe(i_ipaddr, i_next, &rds_ibdev->ipaddr_list, list) {
list_del(&i_ipaddr->list);
@@ -191,14 +189,6 @@ static int rds_ib_add_one(struct ib_device *device)
rds_ibdev->pd = NULL;
goto put_dev;
}
- rds_ibdev->rid_hdrs_pool = dma_pool_create(device->name,
- device->dma_device,
- sizeof(struct rds_header),
- L1_CACHE_BYTES, 0);
- if (!rds_ibdev->rid_hdrs_pool) {
- ret = -ENOMEM;
- goto put_dev;
- }
rds_ibdev->mr_1m_pool =
rds_ib_create_mr_pool(rds_ibdev, RDS_IB_MR_1M_POOL);
diff --git a/net/rds/ib.h b/net/rds/ib.h
index c23a11d9ad362..2ba71102b1f1f 100644
--- a/net/rds/ib.h
+++ b/net/rds/ib.h
@@ -246,7 +246,6 @@ struct rds_ib_device {
struct list_head conn_list;
struct ib_device *dev;
struct ib_pd *pd;
- struct dma_pool *rid_hdrs_pool; /* RDS headers DMA pool */
u8 odp_capable:1;
unsigned int max_mrs;
@@ -380,11 +379,6 @@ int rds_ib_cm_handle_connect(struct rdma_cm_id *cm_id,
int rds_ib_cm_initiate_connect(struct rdma_cm_id *cm_id, bool isv6);
void rds_ib_cm_connect_complete(struct rds_connection *conn,
struct rdma_cm_event *event);
-struct rds_header **rds_dma_hdrs_alloc(struct ib_device *ibdev,
- struct dma_pool *pool,
- dma_addr_t **dma_addrs, u32 num_hdrs);
-void rds_dma_hdrs_free(struct dma_pool *pool, struct rds_header **hdrs,
- dma_addr_t *dma_addrs, u32 num_hdrs);
#define rds_ib_conn_error(conn, fmt...) \
__rds_ib_conn_error(conn, KERN_WARNING "RDS/IB: " fmt)
diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c
index b36b60668b1da..f5cbe963cd8f7 100644
--- a/net/rds/ib_cm.c
+++ b/net/rds/ib_cm.c
@@ -30,7 +30,6 @@
* SOFTWARE.
*
*/
-#include <linux/dmapool.h>
#include <linux/kernel.h>
#include <linux/in.h>
#include <linux/slab.h>
@@ -441,42 +440,87 @@ static inline void ibdev_put_vector(struct rds_ib_device *rds_ibdev, int index)
rds_ibdev->vector_load[index]--;
}
+static void rds_dma_hdr_free(struct ib_device *dev, struct rds_header *hdr,
+ dma_addr_t dma_addr, enum dma_data_direction dir)
+{
+ ib_dma_unmap_single(dev, dma_addr, sizeof(*hdr), dir);
+ kfree(hdr);
+}
+
+static struct rds_header *rds_dma_hdr_alloc(struct ib_device *dev,
+ dma_addr_t *dma_addr, enum dma_data_direction dir)
+{
+ struct rds_header *hdr;
+
+ hdr = kzalloc_node(sizeof(*hdr), GFP_KERNEL, ibdev_to_node(dev));
+ if (!hdr)
+ return NULL;
+
+ *dma_addr = ib_dma_map_single(dev, hdr, sizeof(*hdr),
+ DMA_BIDIRECTIONAL);
+ if (ib_dma_mapping_error(dev, *dma_addr)) {
+ kfree(hdr);
+ return NULL;
+ }
+
+ return hdr;
+}
+
+/* Free the DMA memory used to store struct rds_header.
+ *
+ * @dev: the RDS IB device
+ * @hdrs: pointer to the array storing DMA memory pointers
+ * @dma_addrs: pointer to the array storing DMA addresses
+ * @num_hdars: number of headers to free.
+ */
+static void rds_dma_hdrs_free(struct rds_ib_device *dev,
+ struct rds_header **hdrs, dma_addr_t *dma_addrs, u32 num_hdrs,
+ enum dma_data_direction dir)
+{
+ u32 i;
+
+ for (i = 0; i < num_hdrs; i++)
+ rds_dma_hdr_free(dev->dev, hdrs[i], dma_addrs[i], dir);
+ kvfree(hdrs);
+ kvfree(dma_addrs);
+}
+
+
/* Allocate DMA coherent memory to be used to store struct rds_header for
* sending/receiving packets. The pointers to the DMA memory and the
* associated DMA addresses are stored in two arrays.
*
- * @ibdev: the IB device
- * @pool: the DMA memory pool
+ * @dev: the RDS IB device
* @dma_addrs: pointer to the array for storing DMA addresses
* @num_hdrs: number of headers to allocate
*
* It returns the pointer to the array storing the DMA memory pointers. On
* error, NULL pointer is returned.
*/
-struct rds_header **rds_dma_hdrs_alloc(struct ib_device *ibdev,
- struct dma_pool *pool,
- dma_addr_t **dma_addrs, u32 num_hdrs)
+static struct rds_header **rds_dma_hdrs_alloc(struct rds_ib_device *dev,
+ dma_addr_t **dma_addrs, u32 num_hdrs,
+ enum dma_data_direction dir)
{
struct rds_header **hdrs;
dma_addr_t *hdr_daddrs;
u32 i;
hdrs = kvmalloc_node(sizeof(*hdrs) * num_hdrs, GFP_KERNEL,
- ibdev_to_node(ibdev));
+ ibdev_to_node(dev->dev));
if (!hdrs)
return NULL;
hdr_daddrs = kvmalloc_node(sizeof(*hdr_daddrs) * num_hdrs, GFP_KERNEL,
- ibdev_to_node(ibdev));
+ ibdev_to_node(dev->dev));
if (!hdr_daddrs) {
kvfree(hdrs);
return NULL;
}
for (i = 0; i < num_hdrs; i++) {
- hdrs[i] = dma_pool_zalloc(pool, GFP_KERNEL, &hdr_daddrs[i]);
+ hdrs[i] = rds_dma_hdr_alloc(dev->dev, &hdr_daddrs[i], dir);
if (!hdrs[i]) {
- rds_dma_hdrs_free(pool, hdrs, hdr_daddrs, i);
+ rds_dma_hdrs_free(dev, hdrs, hdr_daddrs, i, dir);
return NULL;
}
}
@@ -485,24 +529,6 @@ struct rds_header **rds_dma_hdrs_alloc(struct ib_device *ibdev,
return hdrs;
}
-/* Free the DMA memory used to store struct rds_header.
- *
- * @pool: the DMA memory pool
- * @hdrs: pointer to the array storing DMA memory pointers
- * @dma_addrs: pointer to the array storing DMA addresses
- * @num_hdars: number of headers to free.
- */
-void rds_dma_hdrs_free(struct dma_pool *pool, struct rds_header **hdrs,
- dma_addr_t *dma_addrs, u32 num_hdrs)
-{
- u32 i;
-
- for (i = 0; i < num_hdrs; i++)
- dma_pool_free(pool, hdrs[i], dma_addrs[i]);
- kvfree(hdrs);
- kvfree(dma_addrs);
-}
-
/*
* This needs to be very careful to not leave IS_ERR pointers around for
* cleanup to trip over.
@@ -516,7 +542,6 @@ static int rds_ib_setup_qp(struct rds_connection *conn)
struct rds_ib_device *rds_ibdev;
unsigned long max_wrs;
int ret, fr_queue_space;
- struct dma_pool *pool;
/*
* It's normal to see a null device if an incoming connection races
@@ -612,25 +637,26 @@ static int rds_ib_setup_qp(struct rds_connection *conn)
goto recv_cq_out;
}
- pool = rds_ibdev->rid_hdrs_pool;
- ic->i_send_hdrs = rds_dma_hdrs_alloc(dev, pool, &ic->i_send_hdrs_dma,
- ic->i_send_ring.w_nr);
+ ic->i_send_hdrs = rds_dma_hdrs_alloc(rds_ibdev, &ic->i_send_hdrs_dma,
+ ic->i_send_ring.w_nr,
+ DMA_TO_DEVICE);
if (!ic->i_send_hdrs) {
ret = -ENOMEM;
rdsdebug("DMA send hdrs alloc failed\n");
goto qp_out;
}
- ic->i_recv_hdrs = rds_dma_hdrs_alloc(dev, pool, &ic->i_recv_hdrs_dma,
- ic->i_recv_ring.w_nr);
+ ic->i_recv_hdrs = rds_dma_hdrs_alloc(rds_ibdev, &ic->i_recv_hdrs_dma,
+ ic->i_recv_ring.w_nr,
+ DMA_FROM_DEVICE);
if (!ic->i_recv_hdrs) {
ret = -ENOMEM;
rdsdebug("DMA recv hdrs alloc failed\n");
goto send_hdrs_dma_out;
}
- ic->i_ack = dma_pool_zalloc(pool, GFP_KERNEL,
- &ic->i_ack_dma);
+ ic->i_ack = rds_dma_hdr_alloc(rds_ibdev->dev, &ic->i_ack_dma,
+ DMA_TO_DEVICE);
if (!ic->i_ack) {
ret = -ENOMEM;
rdsdebug("DMA ack header alloc failed\n");
@@ -666,18 +692,19 @@ sends_out:
vfree(ic->i_sends);
ack_dma_out:
- dma_pool_free(pool, ic->i_ack, ic->i_ack_dma);
+ rds_dma_hdr_free(rds_ibdev->dev, ic->i_ack, ic->i_ack_dma,
+ DMA_TO_DEVICE);
ic->i_ack = NULL;
recv_hdrs_dma_out:
- rds_dma_hdrs_free(pool, ic->i_recv_hdrs, ic->i_recv_hdrs_dma,
- ic->i_recv_ring.w_nr);
+ rds_dma_hdrs_free(rds_ibdev, ic->i_recv_hdrs, ic->i_recv_hdrs_dma,
+ ic->i_recv_ring.w_nr, DMA_FROM_DEVICE);
ic->i_recv_hdrs = NULL;
ic->i_recv_hdrs_dma = NULL;
send_hdrs_dma_out:
- rds_dma_hdrs_free(pool, ic->i_send_hdrs, ic->i_send_hdrs_dma,
- ic->i_send_ring.w_nr);
+ rds_dma_hdrs_free(rds_ibdev, ic->i_send_hdrs, ic->i_send_hdrs_dma,
+ ic->i_send_ring.w_nr, DMA_TO_DEVICE);
ic->i_send_hdrs = NULL;
ic->i_send_hdrs_dma = NULL;
@@ -1110,29 +1137,30 @@ void rds_ib_conn_path_shutdown(struct rds_conn_path *cp)
}
if (ic->rds_ibdev) {
- struct dma_pool *pool;
-
- pool = ic->rds_ibdev->rid_hdrs_pool;
-
/* then free the resources that ib callbacks use */
if (ic->i_send_hdrs) {
- rds_dma_hdrs_free(pool, ic->i_send_hdrs,
+ rds_dma_hdrs_free(ic->rds_ibdev,
+ ic->i_send_hdrs,
ic->i_send_hdrs_dma,
- ic->i_send_ring.w_nr);
+ ic->i_send_ring.w_nr,
+ DMA_TO_DEVICE);
ic->i_send_hdrs = NULL;
ic->i_send_hdrs_dma = NULL;
}
if (ic->i_recv_hdrs) {
- rds_dma_hdrs_free(pool, ic->i_recv_hdrs,
+ rds_dma_hdrs_free(ic->rds_ibdev,
+ ic->i_recv_hdrs,
ic->i_recv_hdrs_dma,
- ic->i_recv_ring.w_nr);
+ ic->i_recv_ring.w_nr,
+ DMA_FROM_DEVICE);
ic->i_recv_hdrs = NULL;
ic->i_recv_hdrs_dma = NULL;
}
if (ic->i_ack) {
- dma_pool_free(pool, ic->i_ack, ic->i_ack_dma);
+ rds_dma_hdr_free(ic->rds_ibdev->dev, ic->i_ack,
+ ic->i_ack_dma, DMA_TO_DEVICE);
ic->i_ack = NULL;
}
} else {
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index 3cffcec5fb371..6fdedd9dbbc28 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -662,10 +662,16 @@ static void rds_ib_send_ack(struct rds_ib_connection *ic, unsigned int adv_credi
seq = rds_ib_get_ack(ic);
rdsdebug("send_ack: ic %p ack %llu\n", ic, (unsigned long long) seq);
+
+ ib_dma_sync_single_for_cpu(ic->rds_ibdev->dev, ic->i_ack_dma,
+ sizeof(*hdr), DMA_TO_DEVICE);
rds_message_populate_header(hdr, 0, 0, 0);
hdr->h_ack = cpu_to_be64(seq);
hdr->h_credit = adv_credits;
rds_message_make_checksum(hdr);
+ ib_dma_sync_single_for_device(ic->rds_ibdev->dev, ic->i_ack_dma,
+ sizeof(*hdr), DMA_TO_DEVICE);
+
ic->i_ack_queued = jiffies;
ret = ib_post_send(ic->i_cm_id->qp, &ic->i_ack_wr, NULL);
@@ -845,6 +851,7 @@ static void rds_ib_process_recv(struct rds_connection *conn,
struct rds_ib_connection *ic = conn->c_transport_data;
struct rds_ib_incoming *ibinc = ic->i_ibinc;
struct rds_header *ihdr, *hdr;
+ dma_addr_t dma_addr = ic->i_recv_hdrs_dma[recv - ic->i_recvs];
/* XXX shut down the connection if port 0,0 are seen? */
@@ -863,6 +870,8 @@ static void rds_ib_process_recv(struct rds_connection *conn,
ihdr = ic->i_recv_hdrs[recv - ic->i_recvs];
+ ib_dma_sync_single_for_cpu(ic->rds_ibdev->dev, dma_addr,
+ sizeof(*ihdr), DMA_FROM_DEVICE);
/* Validate the checksum. */
if (!rds_message_verify_checksum(ihdr)) {
rds_ib_conn_error(conn, "incoming message "
@@ -870,7 +879,7 @@ static void rds_ib_process_recv(struct rds_connection *conn,
"forcing a reconnect\n",
&conn->c_faddr);
rds_stats_inc(s_recv_drop_bad_checksum);
- return;
+ goto done;
}
/* Process the ACK sequence which comes with every packet */
@@ -899,7 +908,7 @@ static void rds_ib_process_recv(struct rds_connection *conn,
*/
rds_ib_frag_free(ic, recv->r_frag);
recv->r_frag = NULL;
- return;
+ goto done;
}
/*
@@ -933,7 +942,7 @@ static void rds_ib_process_recv(struct rds_connection *conn,
hdr->h_dport != ihdr->h_dport) {
rds_ib_conn_error(conn,
"fragment header mismatch; forcing reconnect\n");
- return;
+ goto done;
}
}
@@ -965,6 +974,9 @@ static void rds_ib_process_recv(struct rds_connection *conn,
rds_inc_put(&ibinc->ii_inc);
}
+done:
+ ib_dma_sync_single_for_device(ic->rds_ibdev->dev, dma_addr,
+ sizeof(*ihdr), DMA_FROM_DEVICE);
}
void rds_ib_recv_cqe_handler(struct rds_ib_connection *ic,
diff --git a/net/rds/ib_send.c b/net/rds/ib_send.c
index dfe778220657a..92b4a8689aae7 100644
--- a/net/rds/ib_send.c
+++ b/net/rds/ib_send.c
@@ -638,6 +638,10 @@ int rds_ib_xmit(struct rds_connection *conn, struct rds_message *rm,
send->s_sge[0].length = sizeof(struct rds_header);
send->s_sge[0].lkey = ic->i_pd->local_dma_lkey;
+ ib_dma_sync_single_for_cpu(ic->rds_ibdev->dev,
+ ic->i_send_hdrs_dma[pos],
+ sizeof(struct rds_header),
+ DMA_TO_DEVICE);
memcpy(ic->i_send_hdrs[pos], &rm->m_inc.i_hdr,
sizeof(struct rds_header));
@@ -688,6 +692,10 @@ int rds_ib_xmit(struct rds_connection *conn, struct rds_message *rm,
adv_credits = 0;
rds_ib_stats_inc(s_ib_tx_credit_updates);
}
+ ib_dma_sync_single_for_device(ic->rds_ibdev->dev,
+ ic->i_send_hdrs_dma[pos],
+ sizeof(struct rds_header),
+ DMA_TO_DEVICE);
if (prev)
prev->s_wr.next = &send->s_wr;
--
2.33.0
From: Meng Li <[email protected]>
commit dc7e5940aad6641bd5ab33ea8b21c4b3904d989f upstream.
In orininal code, use 2 function spin_lock() and local_irq_save() to
protect the critical zone. But when enable the kernel debug config,
there are below inconsistent lock state detected.
================================
WARNING: inconsistent lock state
5.10.63-yocto-standard #1 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
lock_torture_wr/226 [HC0[0]:SC1[5]:HE1:SE0] takes:
ffff002005b2dd80 (&p->access_spinlock){+.?.}-{3:3}, at: qbman_swp_enqueue_multiple_mem_back+0x44/0x270
{SOFTIRQ-ON-W} state was registered at:
lock_acquire.part.0+0xf8/0x250
lock_acquire+0x68/0x84
_raw_spin_lock+0x68/0x90
qbman_swp_enqueue_multiple_mem_back+0x44/0x270
......
cryptomgr_test+0x38/0x60
kthread+0x158/0x164
ret_from_fork+0x10/0x38
irq event stamp: 4498
hardirqs last enabled at (4498): [<ffff800010fcf980>] _raw_spin_unlock_irqrestore+0x90/0xb0
hardirqs last disabled at (4497): [<ffff800010fcffc4>] _raw_spin_lock_irqsave+0xd4/0xe0
softirqs last enabled at (4458): [<ffff8000100108c4>] __do_softirq+0x674/0x724
softirqs last disabled at (4465): [<ffff80001005b2a4>] __irq_exit_rcu+0x190/0x19c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&p->access_spinlock);
<Interrupt>
lock(&p->access_spinlock);
*** DEADLOCK ***
So, in order to avoid deadlock, use the combined functions
spin_lock_irqsave/spin_unlock_irqrestore() to protect critical zone.
Fixes: 3b2abda7d28c ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Cc: [email protected]
Signed-off-by: Meng Li <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soc/fsl/dpio/qbman-portal.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
--- a/drivers/soc/fsl/dpio/qbman-portal.c
+++ b/drivers/soc/fsl/dpio/qbman-portal.c
@@ -732,8 +732,7 @@ int qbman_swp_enqueue_multiple_mem_back(
int i, num_enqueued = 0;
unsigned long irq_flags;
- spin_lock(&s->access_spinlock);
- local_irq_save(irq_flags);
+ spin_lock_irqsave(&s->access_spinlock, irq_flags);
half_mask = (s->eqcr.pi_ci_mask>>1);
full_mask = s->eqcr.pi_ci_mask;
@@ -744,8 +743,7 @@ int qbman_swp_enqueue_multiple_mem_back(
s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
eqcr_ci, s->eqcr.ci);
if (!s->eqcr.available) {
- local_irq_restore(irq_flags);
- spin_unlock(&s->access_spinlock);
+ spin_unlock_irqrestore(&s->access_spinlock, irq_flags);
return 0;
}
}
@@ -784,8 +782,7 @@ int qbman_swp_enqueue_multiple_mem_back(
dma_wmb();
qbman_write_register(s, QBMAN_CINH_SWP_EQCR_PI,
(QB_RT_BIT)|(s->eqcr.pi)|s->eqcr.pi_vb);
- local_irq_restore(irq_flags);
- spin_unlock(&s->access_spinlock);
+ spin_unlock_irqrestore(&s->access_spinlock, irq_flags);
return num_enqueued;
}
From: Eric W. Biederman <[email protected]>
commit 95bf9d646c3c3f95cb0be7e703b371db8da5be68 upstream.
When an instruction to save or restore a register from the stack fails
in _save_fp_context or _restore_fp_context return with -EFAULT. This
change was made to r2300_fpu.S[1] but it looks like it got lost with
the introduction of EX2[2]. This is also what the other implementation
of _save_fp_context and _restore_fp_context in r4k_fpu.S does, and
what is needed for the callers to be able to handle the error.
Furthermore calling do_exit(SIGSEGV) from bad_stack is wrong because
it does not terminate the entire process it just terminates a single
thread.
As the changed code was the only caller of arch/mips/kernel/syscall.c:bad_stack
remove the problematic and now unused helper function.
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Maciej Rozycki <[email protected]>
Cc: [email protected]
[1] 35938a00ba86 ("MIPS: Fix ISA I FP sigcontext access violation handling")
[2] f92722dc4545 ("MIPS: Correct MIPS I FP sigcontext layout")
Cc: [email protected]
Fixes: f92722dc4545 ("MIPS: Correct MIPS I FP sigcontext layout")
Acked-by: Maciej W. Rozycki <[email protected]>
Acked-by: Thomas Bogendoerfer <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/r2300_fpu.S | 4 ++--
arch/mips/kernel/syscall.c | 9 ---------
2 files changed, 2 insertions(+), 11 deletions(-)
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -29,8 +29,8 @@
#define EX2(a,b) \
9: a,##b; \
.section __ex_table,"a"; \
- PTR 9b,bad_stack; \
- PTR 9b+4,bad_stack; \
+ PTR 9b,fault; \
+ PTR 9b+4,fault; \
.previous
.set mips1
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -240,12 +240,3 @@ SYSCALL_DEFINE3(cachectl, char *, addr,
{
return -ENOSYS;
}
-
-/*
- * If we ever come here the user sp is bad. Zap the process right away.
- * Due to the bad stack signaling wouldn't work.
- */
-asmlinkage void bad_stack(void)
-{
- do_exit(SIGSEGV);
-}
From: Benjamin Li <[email protected]>
commit d6dbce453b19c64b96f3e927b10230f9a704b504 upstream.
Firmware sends delete_sta_context_ind when it detects the AP has gone
away in STA mode. Right now the handler for that indication only handles
AP mode; fix it to also handle STA mode.
Cc: [email protected]
Signed-off-by: Benjamin Li <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Reviewed-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 44 ++++++++++++++++++++++++---------
1 file changed, 33 insertions(+), 11 deletions(-)
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2632,30 +2632,52 @@ static int wcn36xx_smd_delete_sta_contex
size_t len)
{
struct wcn36xx_hal_delete_sta_context_ind_msg *rsp = buf;
- struct wcn36xx_vif *tmp;
+ struct wcn36xx_vif *vif_priv;
+ struct ieee80211_vif *vif;
+ struct ieee80211_bss_conf *bss_conf;
struct ieee80211_sta *sta;
+ bool found = false;
if (len != sizeof(*rsp)) {
wcn36xx_warn("Corrupted delete sta indication\n");
return -EIO;
}
- wcn36xx_dbg(WCN36XX_DBG_HAL, "delete station indication %pM index %d\n",
- rsp->addr2, rsp->sta_id);
+ wcn36xx_dbg(WCN36XX_DBG_HAL,
+ "delete station indication %pM index %d reason %d\n",
+ rsp->addr2, rsp->sta_id, rsp->reason_code);
- list_for_each_entry(tmp, &wcn->vif_list, list) {
+ list_for_each_entry(vif_priv, &wcn->vif_list, list) {
rcu_read_lock();
- sta = ieee80211_find_sta(wcn36xx_priv_to_vif(tmp), rsp->addr2);
- if (sta)
- ieee80211_report_low_ack(sta, 0);
+ vif = wcn36xx_priv_to_vif(vif_priv);
+
+ if (vif->type == NL80211_IFTYPE_STATION) {
+ /* We could call ieee80211_find_sta too, but checking
+ * bss_conf is clearer.
+ */
+ bss_conf = &vif->bss_conf;
+ if (vif_priv->sta_assoc &&
+ !memcmp(bss_conf->bssid, rsp->addr2, ETH_ALEN)) {
+ found = true;
+ wcn36xx_dbg(WCN36XX_DBG_HAL,
+ "connection loss bss_index %d\n",
+ vif_priv->bss_index);
+ ieee80211_connection_loss(vif);
+ }
+ } else {
+ sta = ieee80211_find_sta(vif, rsp->addr2);
+ if (sta) {
+ found = true;
+ ieee80211_report_low_ack(sta, 0);
+ }
+ }
+
rcu_read_unlock();
- if (sta)
+ if (found)
return 0;
}
- wcn36xx_warn("STA with addr %pM and index %d not found\n",
- rsp->addr2,
- rsp->sta_id);
+ wcn36xx_warn("BSS or STA with addr %pM not found\n", rsp->addr2);
return -ENOENT;
}
From: Wolfram Sang <[email protected]>
commit fff53a551db50f5edecaa0b29a64056ab8d2bbca upstream.
This patch fixes 2 problems:
[1] The output warning logs and data loss when performing
mount/umount then remount the device with jffs2 format.
[2] The access width of SMWDR[0:1]/SMRDR[0:1] register is wrong.
This is the sample warning logs when performing mount/umount then
remount the device with jffs2 format:
jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x031c51d4:
Read 0x00034e00, calculated 0xadb272a7
The reason for issue [1] is that the writing data seems to
get messed up.
Data is only completed when the number of bytes is divisible by 4.
If you only have 3 bytes of data left to write, 1 garbage byte
is inserted after the end of the write stream.
If you only have 2 bytes of data left to write, 2 bytes of '00'
are added into the write stream.
If you only have 1 byte of data left to write, 2 bytes of '00'
are added into the write stream. 1 garbage byte is inserted after
the end of the write stream.
To solve problem [1], data must be written continuously in serial
and the write stream ends when data is out.
Following HW manual 62.2.15, access to SMWDR0 register should be
in the same size as the transfer size specified in the SPIDE[3:0]
bits in the manual mode enable setting register (SMENR).
Be sure to access from address 0.
So, in 16-bit transfer (SPIDE[3:0]=b'1100), SMWDR0 should be
accessed by 16-bit width.
Similar to SMWDR1, SMDDR0/1 registers.
In current code, SMWDR0 register is accessed by regmap_write()
that only set up to do 32-bit width.
To solve problem [2], data must be written 16-bit or 8-bit when
transferring 1-byte or 2-byte.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Cc: <[email protected]>
Signed-off-by: Duc Nguyen <[email protected]>
[wsa: refactored to use regmap only via reg_read/reg_write]
Signed-off-by: Wolfram Sang <[email protected]>
Tested-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/memory/renesas-rpc-if.c | 113 +++++++++++++++++++++++++++-------------
include/memory/renesas-rpc-if.h | 1
2 files changed, 79 insertions(+), 35 deletions(-)
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -161,10 +161,62 @@ static const struct regmap_access_table
.n_yes_ranges = ARRAY_SIZE(rpcif_volatile_ranges),
};
+
+/*
+ * Custom accessor functions to ensure SMRDR0 and SMWDR0 are always accessed
+ * with proper width. Requires SMENR_SPIDE to be correctly set before!
+ */
+static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+ struct rpcif *rpc = context;
+
+ if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) {
+ u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF);
+
+ if (spide == 0x8) {
+ *val = readb(rpc->base + reg);
+ return 0;
+ } else if (spide == 0xC) {
+ *val = readw(rpc->base + reg);
+ return 0;
+ } else if (spide != 0xF) {
+ return -EILSEQ;
+ }
+ }
+
+ *val = readl(rpc->base + reg);
+ return 0;
+
+}
+
+static int rpcif_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+ struct rpcif *rpc = context;
+
+ if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) {
+ u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF);
+
+ if (spide == 0x8) {
+ writeb(val, rpc->base + reg);
+ return 0;
+ } else if (spide == 0xC) {
+ writew(val, rpc->base + reg);
+ return 0;
+ } else if (spide != 0xF) {
+ return -EILSEQ;
+ }
+ }
+
+ writel(val, rpc->base + reg);
+ return 0;
+}
+
static const struct regmap_config rpcif_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
+ .reg_read = rpcif_reg_read,
+ .reg_write = rpcif_reg_write,
.fast_io = true,
.max_register = RPCIF_PHYINT,
.volatile_table = &rpcif_volatile_table,
@@ -174,17 +226,15 @@ int rpcif_sw_init(struct rpcif *rpc, str
{
struct platform_device *pdev = to_platform_device(dev);
struct resource *res;
- void __iomem *base;
rpc->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ rpc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rpc->base))
+ return PTR_ERR(rpc->base);
- rpc->regmap = devm_regmap_init_mmio(&pdev->dev, base,
- &rpcif_regmap_config);
+ rpc->regmap = devm_regmap_init(&pdev->dev, NULL, rpc, &rpcif_regmap_config);
if (IS_ERR(rpc->regmap)) {
dev_err(&pdev->dev,
"failed to init regmap for rpcif, error %ld\n",
@@ -367,20 +417,16 @@ void rpcif_prepare(struct rpcif *rpc, co
nbytes = op->data.nbytes;
rpc->xferlen = nbytes;
- rpc->enable |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes)) |
- RPCIF_SMENR_SPIDB(rpcif_bit_size(op->data.buswidth));
+ rpc->enable |= RPCIF_SMENR_SPIDB(rpcif_bit_size(op->data.buswidth));
}
}
EXPORT_SYMBOL(rpcif_prepare);
int rpcif_manual_xfer(struct rpcif *rpc)
{
- u32 smenr, smcr, pos = 0, max = 4;
+ u32 smenr, smcr, pos = 0, max = rpc->bus_size == 2 ? 8 : 4;
int ret = 0;
- if (rpc->bus_size == 2)
- max = 8;
-
pm_runtime_get_sync(rpc->dev);
regmap_update_bits(rpc->regmap, RPCIF_PHYCNT,
@@ -391,37 +437,36 @@ int rpcif_manual_xfer(struct rpcif *rpc)
regmap_write(rpc->regmap, RPCIF_SMOPR, rpc->option);
regmap_write(rpc->regmap, RPCIF_SMDMCR, rpc->dummy);
regmap_write(rpc->regmap, RPCIF_SMDRENR, rpc->ddr);
+ regmap_write(rpc->regmap, RPCIF_SMADR, rpc->smadr);
smenr = rpc->enable;
switch (rpc->dir) {
case RPCIF_DATA_OUT:
while (pos < rpc->xferlen) {
- u32 nbytes = rpc->xferlen - pos;
- u32 data[2];
+ u32 bytes_left = rpc->xferlen - pos;
+ u32 nbytes, data[2];
smcr = rpc->smcr | RPCIF_SMCR_SPIE;
- if (nbytes > max) {
- nbytes = max;
+
+ /* nbytes may only be 1, 2, 4, or 8 */
+ nbytes = bytes_left >= max ? max : (1 << ilog2(bytes_left));
+ if (bytes_left > nbytes)
smcr |= RPCIF_SMCR_SSLKP;
- }
+
+ smenr |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes));
+ regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
memcpy(data, rpc->buffer + pos, nbytes);
- if (nbytes > 4) {
+ if (nbytes == 8) {
regmap_write(rpc->regmap, RPCIF_SMWDR1,
data[0]);
regmap_write(rpc->regmap, RPCIF_SMWDR0,
data[1]);
- } else if (nbytes > 2) {
+ } else {
regmap_write(rpc->regmap, RPCIF_SMWDR0,
data[0]);
- } else {
- regmap_write(rpc->regmap, RPCIF_SMWDR0,
- data[0] << 16);
}
- regmap_write(rpc->regmap, RPCIF_SMADR,
- rpc->smadr + pos);
- regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
regmap_write(rpc->regmap, RPCIF_SMCR, smcr);
ret = wait_msg_xfer_end(rpc);
if (ret)
@@ -461,14 +506,16 @@ int rpcif_manual_xfer(struct rpcif *rpc)
break;
}
while (pos < rpc->xferlen) {
- u32 nbytes = rpc->xferlen - pos;
- u32 data[2];
+ u32 bytes_left = rpc->xferlen - pos;
+ u32 nbytes, data[2];
- if (nbytes > max)
- nbytes = max;
+ /* nbytes may only be 1, 2, 4, or 8 */
+ nbytes = bytes_left >= max ? max : (1 << ilog2(bytes_left));
regmap_write(rpc->regmap, RPCIF_SMADR,
rpc->smadr + pos);
+ smenr &= ~RPCIF_SMENR_SPIDE(0xF);
+ smenr |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes));
regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
regmap_write(rpc->regmap, RPCIF_SMCR,
rpc->smcr | RPCIF_SMCR_SPIE);
@@ -476,18 +523,14 @@ int rpcif_manual_xfer(struct rpcif *rpc)
if (ret)
goto err_out;
- if (nbytes > 4) {
+ if (nbytes == 8) {
regmap_read(rpc->regmap, RPCIF_SMRDR1,
&data[0]);
regmap_read(rpc->regmap, RPCIF_SMRDR0,
&data[1]);
- } else if (nbytes > 2) {
- regmap_read(rpc->regmap, RPCIF_SMRDR0,
- &data[0]);
- } else {
+ } else {
regmap_read(rpc->regmap, RPCIF_SMRDR0,
&data[0]);
- data[0] >>= 16;
}
memcpy(rpc->buffer + pos, data, nbytes);
--- a/include/memory/renesas-rpc-if.h
+++ b/include/memory/renesas-rpc-if.h
@@ -58,6 +58,7 @@ struct rpcif_op {
struct rpcif {
struct device *dev;
+ void __iomem *base;
void __iomem *dirmap;
struct regmap *regmap;
struct reset_control *rstc;
From: Johan Hovold <[email protected]>
commit a066d28a7e729f808a3e6eff22e70c003091544e upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 241b128b6b69 ("ath6kl: add back beginnings of USB support")
Cc: [email protected] # 3.4
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath6kl/usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -912,7 +912,7 @@ static int ath6kl_usb_submit_ctrl_in(str
req,
USB_DIR_IN | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, value, index, buf,
- size, 2 * HZ);
+ size, 2000);
if (ret < 0) {
ath6kl_warn("Failed to read usb control message: %d\n", ret);
From: Henrik Grimler <[email protected]>
commit 223a3b82834f036a62aa831f67cbf1f1d644c6e2 upstream.
On Galaxy S3 (i9300/i9305), which has the max17047 fuel gauge and no
current sense resistor (rsns), the RepSOC register does not provide an
accurate state of charge value. The reported value is wrong, and does
not change over time. VFSOC however, which uses the voltage fuel gauge
to determine the state of charge, always shows an accurate value.
For devices without current sense, VFSOC is already used for the
soc-alert (0x0003 is written to MiscCFG register), so with this change
the source of the alert and the PROP_CAPACITY value match.
Fixes: 359ab9f5b154 ("power_supply: Add MAX17042 Fuel Gauge Driver")
Cc: <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Suggested-by: Wolfgang Wiedmeyer <[email protected]>
Signed-off-by: Henrik Grimler <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/max17042_battery.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -316,7 +316,10 @@ static int max17042_get_property(struct
val->intval = data * 625 / 8;
break;
case POWER_SUPPLY_PROP_CAPACITY:
- ret = regmap_read(map, MAX17042_RepSOC, &data);
+ if (chip->pdata->enable_current_sense)
+ ret = regmap_read(map, MAX17042_RepSOC, &data);
+ else
+ ret = regmap_read(map, MAX17042_VFSOC, &data);
if (ret < 0)
return ret;
From: Mark Rutland <[email protected]>
commit 8bb084119f1acc2ec55ea085a97231e3ddb30782 upstream.
Since ARMv8.0 the upper 32 bits of ESR_ELx have been RES0, and recently
some of the upper bits gained a meaning and can be non-zero. For
example, when FEAT_LS64 is implemented, ESR_ELx[36:32] contain ISS2,
which for an ST64BV or ST64BV0 can be non-zero. This can be seen in ARM
DDI 0487G.b, page D13-3145, section D13.2.37.
Generally, we must not rely on RES0 bit remaining zero in future, and
when extracting ESR_ELx.EC we must mask out all other bits.
All C code uses the ESR_ELx_EC() macro, which masks out the irrelevant
bits, and therefore no alterations are required to C code to avoid
consuming irrelevant bits.
In a couple of places the KVM assembly extracts ESR_ELx.EC using LSR on
an X register, and so could in theory consume previously RES0 bits. In
both cases this is for comparison with EC values ESR_ELx_EC_HVC32 and
ESR_ELx_EC_HVC64, for which the upper bits of ESR_ELx must currently be
zero, but this could change in future.
This patch adjusts the KVM vectors to use UBFX rather than LSR to
extract ESR_ELx.EC, ensuring these are robust to future additions to
ESR_ELx.
Cc: [email protected]
Signed-off-by: Mark Rutland <[email protected]>
Cc: Alexandru Elisei <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: James Morse <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/esr.h | 1 +
arch/arm64/kvm/hyp/hyp-entry.S | 2 +-
arch/arm64/kvm/hyp/nvhe/host.S | 2 +-
3 files changed, 3 insertions(+), 2 deletions(-)
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -68,6 +68,7 @@
#define ESR_ELx_EC_MAX (0x3F)
#define ESR_ELx_EC_SHIFT (26)
+#define ESR_ELx_EC_WIDTH (6)
#define ESR_ELx_EC_MASK (UL(0x3F) << ESR_ELx_EC_SHIFT)
#define ESR_ELx_EC(esr) (((esr) & ESR_ELx_EC_MASK) >> ESR_ELx_EC_SHIFT)
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -43,7 +43,7 @@
el1_sync: // Guest trapped into EL2
mrs x0, esr_el2
- lsr x0, x0, #ESR_ELx_EC_SHIFT
+ ubfx x0, x0, #ESR_ELx_EC_SHIFT, #ESR_ELx_EC_WIDTH
cmp x0, #ESR_ELx_EC_HVC64
ccmp x0, #ESR_ELx_EC_HVC32, #4, ne
b.ne el1_trap
--- a/arch/arm64/kvm/hyp/nvhe/host.S
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -97,7 +97,7 @@ SYM_FUNC_END(__hyp_do_panic)
.L__vect_start\@:
stp x0, x1, [sp, #-16]!
mrs x0, esr_el2
- lsr x0, x0, #ESR_ELx_EC_SHIFT
+ ubfx x0, x0, #ESR_ELx_EC_SHIFT, #ESR_ELx_EC_WIDTH
cmp x0, #ESR_ELx_EC_HVC64
ldp x0, x1, [sp], #16
b.ne __host_exit
From: Martin Fuzzey <[email protected]>
commit 9b14ed6e11b72dd4806535449ca6c6962cb2369d upstream.
When BT coexistence is enabled (eg oper mode 13, which is the default)
the initialisation on startup sometimes silently fails.
In a normal initialisation we see
usb 1-1.3: Product: Wireless USB Network Module
usb 1-1.3: Manufacturer: Redpine Signals, Inc.
usb 1-1.3: SerialNumber: 000000000001
rsi_91x: rsi_probe: Initialized os intf ops
rsi_91x: rsi_load_9116_firmware: Loading chunk 0
rsi_91x: rsi_load_9116_firmware: Loading chunk 1
rsi_91x: rsi_load_9116_firmware: Loading chunk 2
rsi_91x: Max Stations Allowed = 1
But sometimes the last log is missing and the wlan net device is
not created.
Running a userspace loop that resets the hardware via a GPIO shows the
problem occurring ~5/100 resets.
The problem does not occur in oper mode 1 (wifi only).
Adding logs shows that the initialisation state machine requests a MAC
reset via rsi_send_reset_mac() but the firmware does not reply, leading
to the initialisation sequence being incomplete.
Fix this by delaying attaching the BT adapter until the wifi
initialisation has completed.
With this applied I have done > 300 reset loops with no errors.
Fixes: 716b840c7641 ("rsi: handle BT traffic in driver")
Signed-off-by: Martin Fuzzey <[email protected]>
CC: [email protected]
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_main.c | 16 +++++++++++++---
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 +++
drivers/net/wireless/rsi/rsi_main.h | 2 ++
3 files changed, 18 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -211,9 +211,10 @@ int rsi_read_pkt(struct rsi_common *comm
bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST];
if (bt_pkt_type == BT_CARD_READY_IND) {
rsi_dbg(INFO_ZONE, "BT Card ready recvd\n");
- if (rsi_bt_ops.attach(common, &g_proto_ops))
- rsi_dbg(ERR_ZONE,
- "Failed to attach BT module\n");
+ if (common->fsm_state == FSM_MAC_INIT_DONE)
+ rsi_attach_bt(common);
+ else
+ common->bt_defer_attach = true;
} else {
if (common->bt_adapter)
rsi_bt_ops.recv_pkt(common->bt_adapter,
@@ -278,6 +279,15 @@ void rsi_set_bt_context(void *priv, void
}
#endif
+void rsi_attach_bt(struct rsi_common *common)
+{
+#ifdef CONFIG_RSI_COEX
+ if (rsi_bt_ops.attach(common, &g_proto_ops))
+ rsi_dbg(ERR_ZONE,
+ "Failed to attach BT module\n");
+#endif
+}
+
/**
* rsi_91x_init() - This function initializes os interface operations.
* @oper_mode: One of DEV_OPMODE_*.
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -2071,6 +2071,9 @@ static int rsi_handle_ta_confirm_type(st
if (common->reinit_hw) {
complete(&common->wlan_init_completion);
} else {
+ if (common->bt_defer_attach)
+ rsi_attach_bt(common);
+
return rsi_mac80211_attach(common);
}
}
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -320,6 +320,7 @@ struct rsi_common {
struct ieee80211_vif *roc_vif;
bool eapol4_confirm;
+ bool bt_defer_attach;
void *bt_adapter;
struct cfg80211_scan_request *hwscan;
@@ -401,5 +402,6 @@ struct rsi_host_intf_ops {
enum rsi_host_intf rsi_get_host_intf(void *priv);
void rsi_set_bt_context(void *priv, void *bt_context);
+void rsi_attach_bt(struct rsi_common *common);
#endif
From: Sean Christopherson <[email protected]>
commit 7dfbc624eb5726367900c8d86deff50836240361 upstream.
Check the current VMCS controls to determine if an MSR write will be
intercepted due to MSR bitmaps being disabled. In the nested VMX case,
KVM will disable MSR bitmaps in vmcs02 if they're disabled in vmcs12 or
if KVM can't map L1's bitmaps for whatever reason.
Note, the bad behavior is relatively benign in the current code base as
KVM sets all bits in vmcs02's MSR bitmap by default, clears bits if and
only if L0 KVM also disables interception of an MSR, and only uses the
buggy helper for MSR_IA32_SPEC_CTRL. Because KVM explicitly tests WRMSR
before disabling interception of MSR_IA32_SPEC_CTRL, the flawed check
will only result in KVM reading MSR_IA32_SPEC_CTRL from hardware when it
isn't strictly necessary.
Tag the fix for stable in case a future fix wants to use
msr_write_intercepted(), in which case a buggy implementation in older
kernels could prove subtly problematic.
Fixes: d28b387fb74d ("KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/vmx.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -859,15 +859,15 @@ void update_exception_bitmap(struct kvm_
/*
* Check if MSR is intercepted for currently loaded MSR bitmap.
*/
-static bool msr_write_intercepted(struct kvm_vcpu *vcpu, u32 msr)
+static bool msr_write_intercepted(struct vcpu_vmx *vmx, u32 msr)
{
unsigned long *msr_bitmap;
int f = sizeof(unsigned long);
- if (!cpu_has_vmx_msr_bitmap())
+ if (!(exec_controls_get(vmx) & CPU_BASED_USE_MSR_BITMAPS))
return true;
- msr_bitmap = to_vmx(vcpu)->loaded_vmcs->msr_bitmap;
+ msr_bitmap = vmx->loaded_vmcs->msr_bitmap;
if (msr <= 0x1fff) {
return !!test_bit(msr, msr_bitmap + 0x800 / f);
@@ -6744,7 +6744,7 @@ reenter_guest:
* If the L02 MSR bitmap does not intercept the MSR, then we need to
* save it.
*/
- if (unlikely(!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL)))
+ if (unlikely(!msr_write_intercepted(vmx, MSR_IA32_SPEC_CTRL)))
vmx->spec_ctrl = native_read_msr(MSR_IA32_SPEC_CTRL);
x86_spec_ctrl_restore_host(vmx->spec_ctrl, 0);
From: Sebastian Krzyszkowiak <[email protected]>
commit e660dbb68c6b3f7b9eb8b9775846a44f9798b719 upstream.
max17042_set_soc_threshold gets called with offset set to 1, which means
that minimum threshold value would underflow once SOC got down to 0,
causing invalid alerts from the gauge.
Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC")
Cc: <[email protected]>
Signed-off-by: Sebastian Krzyszkowiak <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/max17042_battery.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -851,7 +851,8 @@ static void max17042_set_soc_threshold(s
regmap_read(map, MAX17042_RepSOC, &soc);
soc >>= 8;
soc_tr = (soc + off) << 8;
- soc_tr |= (soc - off);
+ if (off < soc)
+ soc_tr |= soc - off;
regmap_write(map, MAX17042_SALRT_Th, soc_tr);
}
From: Zhang Changzhong <[email protected]>
commit c0f49d98006f2db3333b917caac65bce2af9865c upstream.
This patch prevents BAM transport from being closed by receiving abort
message, as specified in SAE-J1939-82 2015 (A.3.3 Row 4).
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Zhang Changzhong <[email protected]>
Acked-by: Oleksij Rempel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/j1939/transport.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -2065,6 +2065,12 @@ static void j1939_tp_cmd_recv(struct j19
break;
case J1939_ETP_CMD_ABORT: /* && J1939_TP_CMD_ABORT */
+ if (j1939_cb_is_broadcast(skcb)) {
+ netdev_err_once(priv->ndev, "%s: abort to broadcast (%02x), ignoring!\n",
+ __func__, skcb->addr.sa);
+ return;
+ }
+
if (j1939_tp_im_transmitter(skcb))
j1939_xtp_rx_abort(priv, skb, true);
From: Zhang Changzhong <[email protected]>
commit a79305e156db3d24fcd8eb649cdb3c3b2350e5c2 upstream.
According to SAE-J1939-82 2015 (A.3.6 Row 2), a receiver should never
send TP.CM_CTS to the global address, so we can add a check in
j1939_can_recv() to drop messages with invalid source address.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Zhang Changzhong <[email protected]>
Acked-by: Oleksij Rempel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/j1939/main.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/net/can/j1939/main.c
+++ b/net/can/j1939/main.c
@@ -75,6 +75,13 @@ static void j1939_can_recv(struct sk_buf
skcb->addr.pgn = (cf->can_id >> 8) & J1939_PGN_MAX;
/* set default message type */
skcb->addr.type = J1939_TP;
+
+ if (!j1939_address_is_valid(skcb->addr.sa)) {
+ netdev_err_once(priv->ndev, "%s: sa is broadcast address, ignoring!\n",
+ __func__);
+ goto done;
+ }
+
if (j1939_pgn_is_pdu1(skcb->addr.pgn)) {
/* Type 1: with destination address */
skcb->addr.da = skcb->addr.pgn;
From: Xiaoming Ni <[email protected]>
commit 3c2172c1c47b4079c29f0e6637d764a99355ebcd upstream.
When the field described in mpc85xx_smp_guts_ids[] is not configured in
dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts"
variable. As a result, the oops is triggered when
mpc85xx_freeze_time_base() is executed.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations")
Cc: [email protected] # v4.6+
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
@@ -94,9 +94,8 @@ int __init mpc85xx_setup_pmc(void)
pr_err("Could not map guts node address\n");
return -ENOMEM;
}
+ qoriq_pm_ops = &mpc85xx_pm_ops;
}
- qoriq_pm_ops = &mpc85xx_pm_ops;
-
return 0;
}
From: Steven Rostedt (VMware) <[email protected]>
commit 51d157946666382e779f94c39891e8e9a020da78 upstream.
The resetting of the entire ring buffer use to simply go through and reset
each individual CPU buffer that had its own protection and synchronization.
But this was very slow, due to performing a synchronization for each CPU.
The code was reshuffled to do one disabling of all CPU buffers, followed
by a single RCU synchronization, and then the resetting of each of the CPU
buffers. But unfortunately, the mutex that prevented multiple occurrences
of resetting the buffer was not moved to the upper function, and there is
nothing to protect from it.
Take the ring buffer mutex around the global reset.
Cc: [email protected]
Fixes: b23d7a5f4a07a ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU")
Reported-by: "Tzvetomir Stoyanov (VMware)" <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ring_buffer.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -5000,6 +5000,9 @@ void ring_buffer_reset(struct trace_buff
struct ring_buffer_per_cpu *cpu_buffer;
int cpu;
+ /* prevent another thread from changing buffer sizes */
+ mutex_lock(&buffer->mutex);
+
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
@@ -5018,6 +5021,8 @@ void ring_buffer_reset(struct trace_buff
atomic_dec(&cpu_buffer->record_disabled);
atomic_dec(&cpu_buffer->resize_disabled);
}
+
+ mutex_unlock(&buffer->mutex);
}
EXPORT_SYMBOL_GPL(ring_buffer_reset);
From: yangerkun <[email protected]>
commit 9a254403760041528bc8f69fe2f5e1ef86950991 upstream.
Example for triggering use after free in a overlay on ext4 setup:
aio_read
ovl_read_iter
vfs_iter_read
ext4_file_read_iter
ext4_dio_read_iter
iomap_dio_rw -> -EIOCBQUEUED
/*
* Here IO is completed in a separate thread,
* ovl_aio_cleanup_handler() frees aio_req which has iocb embedded
*/
file_accessed(iocb->ki_filp); /**BOOM**/
Fix by introducing a refcount in ovl_aio_req similarly to aio_kiocb. This
guarantees that iocb is only freed after vfs_read/write_iter() returns on
underlying fs.
Fixes: 2406a307ac7d ("ovl: implement async IO routines")
Signed-off-by: yangerkun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Cc: <[email protected]> # v5.6
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/overlayfs/file.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -17,6 +17,7 @@
struct ovl_aio_req {
struct kiocb iocb;
+ refcount_t ref;
struct kiocb *orig_iocb;
struct fd fd;
};
@@ -257,6 +258,14 @@ static rwf_t ovl_iocb_to_rwf(int ifl)
return flags;
}
+static inline void ovl_aio_put(struct ovl_aio_req *aio_req)
+{
+ if (refcount_dec_and_test(&aio_req->ref)) {
+ fdput(aio_req->fd);
+ kmem_cache_free(ovl_aio_request_cachep, aio_req);
+ }
+}
+
static void ovl_aio_cleanup_handler(struct ovl_aio_req *aio_req)
{
struct kiocb *iocb = &aio_req->iocb;
@@ -273,8 +282,7 @@ static void ovl_aio_cleanup_handler(stru
}
orig_iocb->ki_pos = iocb->ki_pos;
- fdput(aio_req->fd);
- kmem_cache_free(ovl_aio_request_cachep, aio_req);
+ ovl_aio_put(aio_req);
}
static void ovl_aio_rw_complete(struct kiocb *iocb, long res, long res2)
@@ -324,7 +332,9 @@ static ssize_t ovl_read_iter(struct kioc
aio_req->orig_iocb = iocb;
kiocb_clone(&aio_req->iocb, iocb, real.file);
aio_req->iocb.ki_complete = ovl_aio_rw_complete;
+ refcount_set(&aio_req->ref, 2);
ret = vfs_iocb_iter_read(real.file, &aio_req->iocb, iter);
+ ovl_aio_put(aio_req);
if (ret != -EIOCBQUEUED)
ovl_aio_cleanup_handler(aio_req);
}
@@ -395,7 +405,9 @@ static ssize_t ovl_write_iter(struct kio
kiocb_clone(&aio_req->iocb, iocb, real.file);
aio_req->iocb.ki_flags = ifl;
aio_req->iocb.ki_complete = ovl_aio_rw_complete;
+ refcount_set(&aio_req->ref, 2);
ret = vfs_iocb_iter_write(real.file, &aio_req->iocb, iter);
+ ovl_aio_put(aio_req);
if (ret != -EIOCBQUEUED)
ovl_aio_cleanup_handler(aio_req);
}
From: Pali Rohár <[email protected]>
commit 027b57170bf8bb6999a28e4a5f3d78bf1db0f90c upstream.
Since commit edc6afc54968 ("tty: switch to ktermios and new framework")
termios speed is no longer stored only in c_cflag member but also in new
additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag
then termios speed is stored only in these new members.
Therefore to correctly restore termios speed it is required to store also
ispeed and ospeed members, not only cflag member.
In case only cflag member with BOTHER flag is restored then functions
tty_termios_baud_rate() and tty_termios_input_baud_rate() returns baudrate
stored in c_ospeed / c_ispeed member, which is zero as it was not restored
too. If reported baudrate is invalid (e.g. zero) then serial core functions
report fallback baudrate value 9600. So it means that in this case original
baudrate is lost and kernel changes it to value 9600.
Simple reproducer of this issue is to boot kernel with following command
line argument: "console=ttyXXX,86400" (where ttyXXX is the device name).
For speed 86400 there is no Bnnn constant and therefore kernel has to
represent this speed via BOTHER c_cflag. Which means that speed is stored
only in c_ospeed and c_ispeed members, not in c_cflag anymore.
If bootloader correctly configures serial device to speed 86400 then kernel
prints boot log to early console at speed speed 86400 without any issue.
But after kernel starts initializing real console device ttyXXX then speed
is changed to fallback value 9600 because information about speed was lost.
This patch fixes above issue by storing and restoring also ispeed and
ospeed members, which are required for BOTHER flag.
Fixes: edc6afc54968 ("[PATCH] tty: switch to ktermios and new framework")
Cc: [email protected]
Signed-off-by: Pali Rohár <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/serial_core.c | 16 ++++++++++++++--
include/linux/console.h | 2 ++
2 files changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -222,7 +222,11 @@ static int uart_port_startup(struct tty_
if (retval == 0) {
if (uart_console(uport) && uport->cons->cflag) {
tty->termios.c_cflag = uport->cons->cflag;
+ tty->termios.c_ispeed = uport->cons->ispeed;
+ tty->termios.c_ospeed = uport->cons->ospeed;
uport->cons->cflag = 0;
+ uport->cons->ispeed = 0;
+ uport->cons->ospeed = 0;
}
/*
* Initialise the hardware port settings.
@@ -290,8 +294,11 @@ static void uart_shutdown(struct tty_str
/*
* Turn off DTR and RTS early.
*/
- if (uport && uart_console(uport) && tty)
+ if (uport && uart_console(uport) && tty) {
uport->cons->cflag = tty->termios.c_cflag;
+ uport->cons->ispeed = tty->termios.c_ispeed;
+ uport->cons->ospeed = tty->termios.c_ospeed;
+ }
if (!tty || C_HUPCL(tty))
uart_port_dtr_rts(uport, 0);
@@ -2123,8 +2130,11 @@ uart_set_options(struct uart_port *port,
* Allow the setting of the UART parameters with a NULL console
* too:
*/
- if (co)
+ if (co) {
co->cflag = termios.c_cflag;
+ co->ispeed = termios.c_ispeed;
+ co->ospeed = termios.c_ospeed;
+ }
return 0;
}
@@ -2258,6 +2268,8 @@ int uart_resume_port(struct uart_driver
*/
memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = uport->cons->cflag;
+ termios.c_ispeed = uport->cons->ispeed;
+ termios.c_ospeed = uport->cons->ospeed;
/*
* If that's unset, use the tty termios setting.
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -150,6 +150,8 @@ struct console {
short flags;
short index;
int cflag;
+ uint ispeed;
+ uint ospeed;
void *data;
struct console *next;
};
From: Nuno Sá <[email protected]>
commit 26df977a909f818b7d346b3990735513e7e0bf93 upstream.
The bindings file for this driver is defining the property as 'reg' but
the driver was reading it with the 'num' name. The bindings actually had
the 'num' property when added in
commit ea52c21268e6 ("dt-bindings: iio: dac: Add docs for AD5770R DAC")
and then changed it to 'reg' in
commit 2cf3818f18b2 ("dt-bindings: iio: dac: AD5570R fix bindings errors").
However, both these commits landed in v5.7 so the assumption is
that either 'num' is not being used or if it is, the validations were not
done.
Anyways, if someone comes back yelling about this, we might just support
both of the properties in the future. Not ideal, but that's life...
Fixes: 2cf3818f18b2 ("dt-bindings: iio: dac: AD5570R fix bindings errors")
Signed-off-by: Nuno Sá <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/dac/ad5770r.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/dac/ad5770r.c
+++ b/drivers/iio/dac/ad5770r.c
@@ -522,7 +522,7 @@ static int ad5770r_channel_config(struct
return -EINVAL;
device_for_each_child_node(&st->spi->dev, child) {
- ret = fwnode_property_read_u32(child, "num", &num);
+ ret = fwnode_property_read_u32(child, "reg", &num);
if (ret)
goto err_child_out;
if (num >= AD5770R_MAX_CHANNELS) {
From: Pali Rohár <[email protected]>
commit 1fb95d7d3c7a926b002fe8a6bd27a1cb428b46dc upstream.
There are lot of undocumented interrupt bits. To prevent unwanted
spurious interrupts, fix all *_ALL_MASK macros to define all interrupt
bits, so that driver can properly mask all interrupts, including those
which are undocumented.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -105,13 +105,13 @@
#define PCIE_ISR0_MSI_INT_PENDING BIT(24)
#define PCIE_ISR0_INTX_ASSERT(val) BIT(16 + (val))
#define PCIE_ISR0_INTX_DEASSERT(val) BIT(20 + (val))
-#define PCIE_ISR0_ALL_MASK GENMASK(26, 0)
+#define PCIE_ISR0_ALL_MASK GENMASK(31, 0)
#define PCIE_ISR1_REG (CONTROL_BASE_ADDR + 0x48)
#define PCIE_ISR1_MASK_REG (CONTROL_BASE_ADDR + 0x4C)
#define PCIE_ISR1_POWER_STATE_CHANGE BIT(4)
#define PCIE_ISR1_FLUSH BIT(5)
#define PCIE_ISR1_INTX_ASSERT(val) BIT(8 + (val))
-#define PCIE_ISR1_ALL_MASK GENMASK(11, 4)
+#define PCIE_ISR1_ALL_MASK GENMASK(31, 0)
#define PCIE_MSI_ADDR_LOW_REG (CONTROL_BASE_ADDR + 0x50)
#define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54)
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
@@ -239,7 +239,7 @@ enum {
#define PCIE_IRQ_MSI_INT2_DET BIT(21)
#define PCIE_IRQ_RC_DBELL_DET BIT(22)
#define PCIE_IRQ_EP_STATUS BIT(23)
-#define PCIE_IRQ_ALL_MASK 0xfff0fb
+#define PCIE_IRQ_ALL_MASK GENMASK(31, 0)
#define PCIE_IRQ_ENABLE_INTS_MASK PCIE_IRQ_CORE_INT
/* Transaction types */
From: Reimar Döffinger <[email protected]>
commit f971a85439bd25dc7b4d597cf5e4e8dc7ffc884b upstream.
Checking if DMA is enabled should be done via the
ata_dma_enabled helper function, since the init state
0xff indicates disabled.
This meant that ATA_CMD_READ_LOG_DMA_EXT was used and probed
for before DMA was enabled, which caused hangs for some combinations
of controllers and devices.
It might also have caused it to be incorrectly disabled as broken,
but there have been no reports of that.
Cc: [email protected]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195895
Signed-off-by: Reimar Döffinger <[email protected]>
Tested-by: Paul Menzel <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2004,7 +2004,7 @@ unsigned int ata_read_log_page(struct at
retry:
ata_tf_init(dev, &tf);
- if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
+ if (ata_dma_enabled(dev) && ata_id_has_read_log_dma_ext(dev->id) &&
!(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) {
tf.command = ATA_CMD_READ_LOG_DMA_EXT;
tf.protocol = ATA_PROT_DMA;
From: Marek Behún <[email protected]>
commit 95997723b6402cd6c53e0f9e7ac640ec64eaaff8 upstream.
The PCIE_MSI_PAYLOAD_REG contains 16-bit MSI number, not only lower
8 bits. Fix reading content of this register and add a comment
describing the access to this register.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -118,6 +118,7 @@
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
#define PCIE_MSI_MASK_REG (CONTROL_BASE_ADDR + 0x5C)
#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
+#define PCIE_MSI_DATA_MASK GENMASK(15, 0)
/* PCIe window configuration */
#define OB_WIN_BASE_ADDR 0x4c00
@@ -1361,8 +1362,12 @@ static void advk_pcie_handle_msi(struct
if (!(BIT(msi_idx) & msi_status))
continue;
+ /*
+ * msi_idx contains bits [4:0] of the msi_data and msi_data
+ * contains 16bit MSI interrupt number
+ */
advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
- msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & 0xFF;
+ msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & PCIE_MSI_DATA_MASK;
generic_handle_irq(msi_data);
}
From: Pekka Korpinen <[email protected]>
commit 558df982d4ead9cac628153d0d7b60feae05ddc8 upstream.
On success i2c_master_send() returns the number of bytes written. The
call from iio_write_channel_info(), however, expects the return value to
be zero on success.
This bug causes incorrect consumption of the sysfs buffer in
iio_write_channel_info(). When writing more than two characters to
out_voltage0_raw, the ad5446 write handler is called multiple times
causing unexpected behavior.
Fixes: 3ec36a2cf0d5 ("iio:ad5446: Add support for I2C based DACs")
Signed-off-by: Pekka Korpinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/dac/ad5446.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -531,8 +531,15 @@ static int ad5622_write(struct ad5446_st
{
struct i2c_client *client = to_i2c_client(st->dev);
__be16 data = cpu_to_be16(val);
+ int ret;
- return i2c_master_send(client, (char *)&data, sizeof(data));
+ ret = i2c_master_send(client, (char *)&data, sizeof(data));
+ if (ret < 0)
+ return ret;
+ if (ret != sizeof(data))
+ return -EIO;
+
+ return 0;
}
/*
From: Hans de Goede <[email protected]>
[ Upstream commit 820a2ab23d5eab4ccfb82581eda8ad4acf18458f ]
2 improvements to the Lenovo Ideapad D330 panel-orientation quirks:
1. Some versions of the Lenovo Ideapad D330 have a DMI_PRODUCT_NAME of
"81H3" and others have "81MD". Testing has shown that the "81MD" also has
a 90 degree mounted panel. Drop the DMI_PRODUCT_NAME from the existing
quirk so that the existing quirk matches both variants.
2. Some of the Lenovo Ideapad D330 models have a HD (800x1280) screen
instead of a FHD (1200x1920) screen (both are mounted right-side-up) add
a second Lenovo Ideapad D330 quirk for the HD version.
Changes in v2:
- Add a new quirk for Lenovo Ideapad D330 models with a HD screen instead
of a FHD screen
Link: https://github.com/systemd/systemd/pull/18884
Acked-by: Simon Ser <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index e1b2ce4921ae7..5d0942e3985b2 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -223,10 +223,15 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
},
.driver_data = (void *)&lcd800x1280_rightside_up,
- }, { /* Lenovo Ideapad D330 */
+ }, { /* Lenovo Ideapad D330-10IGM (HD) */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGM"),
+ },
+ .driver_data = (void *)&lcd800x1280_rightside_up,
+ }, { /* Lenovo Ideapad D330-10IGM (FHD) */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "81H3"),
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGM"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
--
2.33.0
From: Simon Ser <[email protected]>
[ Upstream commit 9eeb7b4e40bfd69d8aaa920c7e9df751c9e11dce ]
Valve's Steam Deck has a 800x1280 LCD screen.
Signed-off-by: Simon Ser <[email protected]>
Cc: Jared Baldridge <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Hans de Goede <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 926094b83e2f4..a950d5db211c5 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -261,6 +261,13 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Galaxy Book 10.6"),
},
.driver_data = (void *)&lcd1280x1920_rightside_up,
+ }, { /* Valve Steam Deck */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Valve"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Jupiter"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "1"),
+ },
+ .driver_data = (void *)&lcd800x1280_rightside_up,
}, { /* VIOS LTH17 */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit 88fa1fde918951c175ae5ea0f31efc4bb1736ab9 ]
The Samsung Galaxy Book 10.6 uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Simon Ser <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index cf4db2cdebbbd..926094b83e2f4 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -109,6 +109,12 @@ static const struct drm_dmi_panel_orientation_data lcd1200x1920_rightside_up = {
.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
};
+static const struct drm_dmi_panel_orientation_data lcd1280x1920_rightside_up = {
+ .width = 1280,
+ .height = 1920,
+ .orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
static const struct dmi_system_id orientation_data[] = {
{ /* Acer One 10 (S1003) */
.matches = {
@@ -249,6 +255,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Default string"),
},
.driver_data = (void *)&onegx1_pro,
+ }, { /* Samsung GalaxyBook 10.6 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Galaxy Book 10.6"),
+ },
+ .driver_data = (void *)&lcd1280x1920_rightside_up,
}, { /* VIOS LTH17 */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
--
2.33.0
From: Scott Wood <[email protected]>
[ Upstream commit 71921a9606ddbcc1d98c00eca7ae82c373d1fecd ]
rcutorture is generating some nesting scenarios that are not compatible on PREEMPT_RT.
For example:
preempt_disable();
rcu_read_lock_bh();
preempt_enable();
rcu_read_unlock_bh();
The problem here is that on PREEMPT_RT the bottom halves have to be
disabled and enabled in preemptible context.
Reorder locking: start with BH locking and continue with then with
disabling preemption or interrupts. In the unlocking do it reverse by
first enabling interrupts and preemption and BH at the very end.
Ensure that on PREEMPT_RT BH locking remains unchanged if in
non-preemptible context.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/20210819182035.GF4126399@paulmck-ThinkPad-P17-Gen-1
Signed-off-by: Scott Wood <[email protected]>
[bigeasy: Drop ATOM_BH, make it only about changing BH in atomic
context. Allow enabling RCU in IRQ-off section. Reword commit message.]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/rcutorture.c | 48 ++++++++++++++++++++++++++++++-----------
1 file changed, 36 insertions(+), 12 deletions(-)
diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index 916ea4f66e4b2..6c1aea48a79a1 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -1238,28 +1238,34 @@ static void rcutorture_one_extend(int *readstate, int newstate,
/* First, put new protection in place to avoid critical-section gap. */
if (statesnew & RCUTORTURE_RDR_BH)
local_bh_disable();
+ if (statesnew & RCUTORTURE_RDR_RBH)
+ rcu_read_lock_bh();
if (statesnew & RCUTORTURE_RDR_IRQ)
local_irq_disable();
if (statesnew & RCUTORTURE_RDR_PREEMPT)
preempt_disable();
- if (statesnew & RCUTORTURE_RDR_RBH)
- rcu_read_lock_bh();
if (statesnew & RCUTORTURE_RDR_SCHED)
rcu_read_lock_sched();
if (statesnew & RCUTORTURE_RDR_RCU)
idxnew = cur_ops->readlock() << RCUTORTURE_RDR_SHIFT;
- /* Next, remove old protection, irq first due to bh conflict. */
+ /*
+ * Next, remove old protection, in decreasing order of strength
+ * to avoid unlock paths that aren't safe in the stronger
+ * context. Namely: BH can not be enabled with disabled interrupts.
+ * Additionally PREEMPT_RT requires that BH is enabled in preemptible
+ * context.
+ */
if (statesold & RCUTORTURE_RDR_IRQ)
local_irq_enable();
- if (statesold & RCUTORTURE_RDR_BH)
- local_bh_enable();
if (statesold & RCUTORTURE_RDR_PREEMPT)
preempt_enable();
- if (statesold & RCUTORTURE_RDR_RBH)
- rcu_read_unlock_bh();
if (statesold & RCUTORTURE_RDR_SCHED)
rcu_read_unlock_sched();
+ if (statesold & RCUTORTURE_RDR_BH)
+ local_bh_enable();
+ if (statesold & RCUTORTURE_RDR_RBH)
+ rcu_read_unlock_bh();
if (statesold & RCUTORTURE_RDR_RCU) {
bool lockit = !statesnew && !(torture_random(trsp) & 0xffff);
@@ -1302,6 +1308,9 @@ rcutorture_extend_mask(int oldmask, struct torture_random_state *trsp)
int mask = rcutorture_extend_mask_max();
unsigned long randmask1 = torture_random(trsp) >> 8;
unsigned long randmask2 = randmask1 >> 3;
+ unsigned long preempts = RCUTORTURE_RDR_PREEMPT | RCUTORTURE_RDR_SCHED;
+ unsigned long preempts_irq = preempts | RCUTORTURE_RDR_IRQ;
+ unsigned long bhs = RCUTORTURE_RDR_BH | RCUTORTURE_RDR_RBH;
WARN_ON_ONCE(mask >> RCUTORTURE_RDR_SHIFT);
/* Mostly only one bit (need preemption!), sometimes lots of bits. */
@@ -1309,11 +1318,26 @@ rcutorture_extend_mask(int oldmask, struct torture_random_state *trsp)
mask = mask & randmask2;
else
mask = mask & (1 << (randmask2 % RCUTORTURE_RDR_NBITS));
- /* Can't enable bh w/irq disabled. */
- if ((mask & RCUTORTURE_RDR_IRQ) &&
- ((!(mask & RCUTORTURE_RDR_BH) && (oldmask & RCUTORTURE_RDR_BH)) ||
- (!(mask & RCUTORTURE_RDR_RBH) && (oldmask & RCUTORTURE_RDR_RBH))))
- mask |= RCUTORTURE_RDR_BH | RCUTORTURE_RDR_RBH;
+
+ /*
+ * Can't enable bh w/irq disabled.
+ */
+ if (mask & RCUTORTURE_RDR_IRQ)
+ mask |= oldmask & bhs;
+
+ /*
+ * Ideally these sequences would be detected in debug builds
+ * (regardless of RT), but until then don't stop testing
+ * them on non-RT.
+ */
+ if (IS_ENABLED(CONFIG_PREEMPT_RT)) {
+ /* Can't modify BH in atomic context */
+ if (oldmask & preempts_irq)
+ mask &= ~bhs;
+ if ((oldmask | mask) & preempts_irq)
+ mask |= oldmask & bhs;
+ }
+
return mask ?: RCUTORTURE_RDR_RCU;
}
--
2.33.0
From: Takashi Iwai <[email protected]>
[ Upstream commit 99c23da0eed4fd20cae8243f2b51e10e66aa0951 ]
The sco_send_frame() also takes lock_sock() during memcpy_from_msg()
call that may be endlessly blocked by a task with userfaultd
technique, and this will result in a hung task watchdog trigger.
Just like the similar fix for hci_sock_sendmsg() in commit
92c685dc5de0 ("Bluetooth: reorganize functions..."), this patch moves
the memcpy_from_msg() out of lock_sock() for addressing the hang.
This should be the last piece for fixing CVE-2021-3640 after a few
already queued fixes.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/sco.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 7c24a9acbc459..93df269a64707 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -281,7 +281,8 @@ static int sco_connect(struct hci_dev *hdev, struct sock *sk)
return err;
}
-static int sco_send_frame(struct sock *sk, struct msghdr *msg, int len)
+static int sco_send_frame(struct sock *sk, void *buf, int len,
+ unsigned int msg_flags)
{
struct sco_conn *conn = sco_pi(sk)->conn;
struct sk_buff *skb;
@@ -293,15 +294,11 @@ static int sco_send_frame(struct sock *sk, struct msghdr *msg, int len)
BT_DBG("sk %p len %d", sk, len);
- skb = bt_skb_send_alloc(sk, len, msg->msg_flags & MSG_DONTWAIT, &err);
+ skb = bt_skb_send_alloc(sk, len, msg_flags & MSG_DONTWAIT, &err);
if (!skb)
return err;
- if (memcpy_from_msg(skb_put(skb, len), msg, len)) {
- kfree_skb(skb);
- return -EFAULT;
- }
-
+ memcpy(skb_put(skb, len), buf, len);
hci_send_sco(conn->hcon, skb);
return len;
@@ -726,6 +723,7 @@ static int sco_sock_sendmsg(struct socket *sock, struct msghdr *msg,
size_t len)
{
struct sock *sk = sock->sk;
+ void *buf;
int err;
BT_DBG("sock %p, sk %p", sock, sk);
@@ -737,14 +735,24 @@ static int sco_sock_sendmsg(struct socket *sock, struct msghdr *msg,
if (msg->msg_flags & MSG_OOB)
return -EOPNOTSUPP;
+ buf = kmalloc(len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ if (memcpy_from_msg(buf, msg, len)) {
+ kfree(buf);
+ return -EFAULT;
+ }
+
lock_sock(sk);
if (sk->sk_state == BT_CONNECTED)
- err = sco_send_frame(sk, msg, len);
+ err = sco_send_frame(sk, buf, len, msg->msg_flags);
else
err = -ENOTCONN;
release_sock(sk);
+ kfree(buf);
return err;
}
--
2.33.0
From: Wang Hai <[email protected]>
commit 910c996335c37552ee30fcb837375b808bb4f33b upstream.
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888258228440 (size 64):
comm "kworker/7:2", pid 2005, jiffies 4294989509 (age 824.540s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
[<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
[<ffffffffa02ac0e4>] keyspan_port_probe+0xa4/0x5d0 [keyspan]
[<ffffffffa0294c07>] usb_serial_device_probe+0x97/0x1d0 [usbserial]
[<ffffffff82b50ca7>] really_probe+0x167/0x460
[<ffffffff82b51099>] __driver_probe_device+0xf9/0x180
[<ffffffff82b51173>] driver_probe_device+0x53/0x130
[<ffffffff82b516f5>] __device_attach_driver+0x105/0x130
[<ffffffff82b4cfe9>] bus_for_each_drv+0x129/0x190
[<ffffffff82b50a69>] __device_attach+0x1c9/0x270
[<ffffffff82b518d0>] device_initial_probe+0x20/0x30
[<ffffffff82b4f062>] bus_probe_device+0x142/0x160
[<ffffffff82b4a4e9>] device_add+0x829/0x1300
[<ffffffffa0295fda>] usb_serial_probe.cold+0xc9b/0x14ac [usbserial]
[<ffffffffa02266aa>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
[<ffffffff82b50ca7>] really_probe+0x167/0x460
If keyspan_port_probe() fails to allocate memory for an out_buffer[i] or
in_buffer[i], the previously allocated memory for out_buffer or
in_buffer needs to be freed on the error handling path, otherwise a
memory leak will result.
Fixes: bad41a5bf177 ("USB: keyspan: fix port DMA-buffer allocations")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected] # 3.12
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/keyspan.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2910,22 +2910,22 @@ static int keyspan_port_probe(struct usb
for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) {
p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL);
if (!p_priv->in_buffer[i])
- goto err_in_buffer;
+ goto err_free_in_buffer;
}
for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) {
p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL);
if (!p_priv->out_buffer[i])
- goto err_out_buffer;
+ goto err_free_out_buffer;
}
p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL);
if (!p_priv->inack_buffer)
- goto err_inack_buffer;
+ goto err_free_out_buffer;
p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL);
if (!p_priv->outcont_buffer)
- goto err_outcont_buffer;
+ goto err_free_inack_buffer;
p_priv->device_details = d_details;
@@ -2971,15 +2971,14 @@ static int keyspan_port_probe(struct usb
return 0;
-err_outcont_buffer:
+err_free_inack_buffer:
kfree(p_priv->inack_buffer);
-err_inack_buffer:
+err_free_out_buffer:
for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
kfree(p_priv->out_buffer[i]);
-err_out_buffer:
+err_free_in_buffer:
for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
kfree(p_priv->in_buffer[i]);
-err_in_buffer:
kfree(p_priv);
return -ENOMEM;
From: Barnabás Pőcze <[email protected]>
[ Upstream commit 1975718c488a39128f1f515b23ae61a5a214cc3d ]
Previously, `__query_block()` would fail if the
second WCxx method call failed. However, the
WQxx method might have succeeded, and potentially
allocated memory for the result. Instead of
throwing away the result and potentially
leaking memory, ignore the result of
the second WCxx call.
Signed-off-by: Barnabás Pőcze <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/wmi.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index d88f388a3450f..1f80b26281628 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -354,7 +354,14 @@ static acpi_status __query_block(struct wmi_block *wblock, u8 instance,
* the WQxx method failed - we should disable collection anyway.
*/
if ((block->flags & ACPI_WMI_EXPENSIVE) && ACPI_SUCCESS(wc_status)) {
- status = acpi_execute_simple_method(handle, wc_method, 0);
+ /*
+ * Ignore whether this WCxx call succeeds or not since
+ * the previously executed WQxx method call might have
+ * succeeded, and returning the failing status code
+ * of this call would throw away the result of the WQxx
+ * call, potentially leaking memory.
+ */
+ acpi_execute_simple_method(handle, wc_method, 0);
}
return status;
--
2.33.0
From: Johan Hovold <[email protected]>
commit 9aaa81c3366e8393a62374e3a1c67c69edc07b8a upstream.
Chipidea core was calling the interrupt handler from non-IRQ context
with interrupts enabled, something which can lead to a deadlock if
there's an actual interrupt trying to take a lock that's already held
(e.g. the controller lock in udc_irq()).
Add a wrapper that can be used to fake interrupts instead of calling the
handler directly.
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Fixes: 876d4e1e8298 ("usb: chipidea: core: add wakeup support for extcon")
Cc: Peter Chen <[email protected]>
Cc: [email protected] # 4.4
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/chipidea/core.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -509,7 +509,7 @@ int hw_device_reset(struct ci_hdrc *ci)
return 0;
}
-static irqreturn_t ci_irq(int irq, void *data)
+static irqreturn_t ci_irq_handler(int irq, void *data)
{
struct ci_hdrc *ci = data;
irqreturn_t ret = IRQ_NONE;
@@ -562,6 +562,15 @@ static irqreturn_t ci_irq(int irq, void
return ret;
}
+static void ci_irq(struct ci_hdrc *ci)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ ci_irq_handler(ci->irq, ci);
+ local_irq_restore(flags);
+}
+
static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
void *ptr)
{
@@ -571,7 +580,7 @@ static int ci_cable_notifier(struct noti
cbl->connected = event;
cbl->changed = true;
- ci_irq(ci->irq, ci);
+ ci_irq(ci);
return NOTIFY_DONE;
}
@@ -612,7 +621,7 @@ static int ci_usb_role_switch_set(struct
if (cable) {
cable->changed = true;
cable->connected = false;
- ci_irq(ci->irq, ci);
+ ci_irq(ci);
spin_unlock_irqrestore(&ci->lock, flags);
if (ci->wq && role != USB_ROLE_NONE)
flush_workqueue(ci->wq);
@@ -630,7 +639,7 @@ static int ci_usb_role_switch_set(struct
if (cable) {
cable->changed = true;
cable->connected = true;
- ci_irq(ci->irq, ci);
+ ci_irq(ci);
}
spin_unlock_irqrestore(&ci->lock, flags);
pm_runtime_put_sync(ci->dev);
@@ -1166,7 +1175,7 @@ static int ci_hdrc_probe(struct platform
}
}
- ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
+ ret = devm_request_irq(dev, ci->irq, ci_irq_handler, IRQF_SHARED,
ci->platdata->name, ci);
if (ret)
goto stop;
@@ -1287,11 +1296,11 @@ static void ci_extcon_wakeup_int(struct
if (!IS_ERR(cable_id->edev) && ci->is_otg &&
(otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
- ci_irq(ci->irq, ci);
+ ci_irq(ci);
if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
(otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
- ci_irq(ci->irq, ci);
+ ci_irq(ci);
}
static int ci_controller_resume(struct device *dev)
From: Wang ShaoBo <[email protected]>
[ Upstream commit 1bff51ea59a9afb67d2dd78518ab0582a54a472c ]
use-after-free error in lock_sock_nested is reported:
[ 179.140137][ T3731] =====================================================
[ 179.142675][ T3731] BUG: KMSAN: use-after-free in lock_sock_nested+0x280/0x2c0
[ 179.145494][ T3731] CPU: 4 PID: 3731 Comm: kworker/4:2 Not tainted 5.12.0-rc6+ #54
[ 179.148432][ T3731] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 179.151806][ T3731] Workqueue: events l2cap_chan_timeout
[ 179.152730][ T3731] Call Trace:
[ 179.153301][ T3731] dump_stack+0x24c/0x2e0
[ 179.154063][ T3731] kmsan_report+0xfb/0x1e0
[ 179.154855][ T3731] __msan_warning+0x5c/0xa0
[ 179.155579][ T3731] lock_sock_nested+0x280/0x2c0
[ 179.156436][ T3731] ? kmsan_get_metadata+0x116/0x180
[ 179.157257][ T3731] l2cap_sock_teardown_cb+0xb8/0x890
[ 179.158154][ T3731] ? __msan_metadata_ptr_for_load_8+0x10/0x20
[ 179.159141][ T3731] ? kmsan_get_metadata+0x116/0x180
[ 179.159994][ T3731] ? kmsan_get_shadow_origin_ptr+0x84/0xb0
[ 179.160959][ T3731] ? l2cap_sock_recv_cb+0x420/0x420
[ 179.161834][ T3731] l2cap_chan_del+0x3e1/0x1d50
[ 179.162608][ T3731] ? kmsan_get_metadata+0x116/0x180
[ 179.163435][ T3731] ? kmsan_get_shadow_origin_ptr+0x84/0xb0
[ 179.164406][ T3731] l2cap_chan_close+0xeea/0x1050
[ 179.165189][ T3731] ? kmsan_internal_unpoison_shadow+0x42/0x70
[ 179.166180][ T3731] l2cap_chan_timeout+0x1da/0x590
[ 179.167066][ T3731] ? __msan_metadata_ptr_for_load_8+0x10/0x20
[ 179.168023][ T3731] ? l2cap_chan_create+0x560/0x560
[ 179.168818][ T3731] process_one_work+0x121d/0x1ff0
[ 179.169598][ T3731] worker_thread+0x121b/0x2370
[ 179.170346][ T3731] kthread+0x4ef/0x610
[ 179.171010][ T3731] ? process_one_work+0x1ff0/0x1ff0
[ 179.171828][ T3731] ? kthread_blkcg+0x110/0x110
[ 179.172587][ T3731] ret_from_fork+0x1f/0x30
[ 179.173348][ T3731]
[ 179.173752][ T3731] Uninit was created at:
[ 179.174409][ T3731] kmsan_internal_poison_shadow+0x5c/0xf0
[ 179.175373][ T3731] kmsan_slab_free+0x76/0xc0
[ 179.176060][ T3731] kfree+0x3a5/0x1180
[ 179.176664][ T3731] __sk_destruct+0x8af/0xb80
[ 179.177375][ T3731] __sk_free+0x812/0x8c0
[ 179.178032][ T3731] sk_free+0x97/0x130
[ 179.178686][ T3731] l2cap_sock_release+0x3d5/0x4d0
[ 179.179457][ T3731] sock_close+0x150/0x450
[ 179.180117][ T3731] __fput+0x6bd/0xf00
[ 179.180787][ T3731] ____fput+0x37/0x40
[ 179.181481][ T3731] task_work_run+0x140/0x280
[ 179.182219][ T3731] do_exit+0xe51/0x3e60
[ 179.182930][ T3731] do_group_exit+0x20e/0x450
[ 179.183656][ T3731] get_signal+0x2dfb/0x38f0
[ 179.184344][ T3731] arch_do_signal_or_restart+0xaa/0xe10
[ 179.185266][ T3731] exit_to_user_mode_prepare+0x2d2/0x560
[ 179.186136][ T3731] syscall_exit_to_user_mode+0x35/0x60
[ 179.186984][ T3731] do_syscall_64+0xc5/0x140
[ 179.187681][ T3731] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 179.188604][ T3731] =====================================================
In our case, there are two Thread A and B:
Context: Thread A: Context: Thread B:
l2cap_chan_timeout() __se_sys_shutdown()
l2cap_chan_close() l2cap_sock_shutdown()
l2cap_chan_del() l2cap_chan_close()
l2cap_sock_teardown_cb() l2cap_sock_teardown_cb()
Once l2cap_sock_teardown_cb() excuted, this sock will be marked as SOCK_ZAPPED,
and can be treated as killable in l2cap_sock_kill() if sock_orphan() has
excuted, at this time we close sock through sock_close() which end to call
l2cap_sock_kill() like Thread C:
Context: Thread C:
sock_close()
l2cap_sock_release()
sock_orphan()
l2cap_sock_kill() #free sock if refcnt is 1
If C completed, Once A or B reaches l2cap_sock_teardown_cb() again,
use-after-free happened.
We should set chan->data to NULL if sock is destructed, for telling teardown
operation is not allowed in l2cap_sock_teardown_cb(), and also we should
avoid killing an already killed socket in l2cap_sock_close_cb().
Signed-off-by: Wang ShaoBo <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index c99d65ef13b1e..160c016a5dfb9 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1508,6 +1508,9 @@ static void l2cap_sock_close_cb(struct l2cap_chan *chan)
{
struct sock *sk = chan->data;
+ if (!sk)
+ return;
+
l2cap_sock_kill(sk);
}
@@ -1516,6 +1519,9 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
struct sock *sk = chan->data;
struct sock *parent;
+ if (!sk)
+ return;
+
BT_DBG("chan %p state %s", chan, state_to_string(chan->state));
/* This callback can be called both for server (BT_LISTEN)
@@ -1707,8 +1713,10 @@ static void l2cap_sock_destruct(struct sock *sk)
{
BT_DBG("sk %p", sk);
- if (l2cap_pi(sk)->chan)
+ if (l2cap_pi(sk)->chan) {
+ l2cap_pi(sk)->chan->data = NULL;
l2cap_chan_put(l2cap_pi(sk)->chan);
+ }
if (l2cap_pi(sk)->rx_busy_skb) {
kfree_skb(l2cap_pi(sk)->rx_busy_skb);
--
2.33.0
From: Johan Hovold <[email protected]>
commit 79a4479a17b83310deb0b1a2a274fe5be12d2318 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Use the common control-message timeout define for the five-second
timeout and drop the driver-specific one.
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Cc: [email protected] # 2.6.21
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/iowarrior.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -99,10 +99,6 @@ struct iowarrior {
/* globals */
/*--------------*/
-/*
- * USB spec identifies 5 second timeouts.
- */
-#define GET_TIMEOUT 5
#define USB_REQ_GET_REPORT 0x01
//#if 0
static int usb_get_report(struct usb_device *dev,
@@ -114,7 +110,7 @@ static int usb_get_report(struct usb_dev
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, (type << 8) + id,
inter->desc.bInterfaceNumber, buf, size,
- GET_TIMEOUT*HZ);
+ USB_CTRL_GET_TIMEOUT);
}
//#endif
@@ -129,7 +125,7 @@ static int usb_set_report(struct usb_int
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id,
intf->cur_altsetting->desc.bInterfaceNumber, buf,
- size, HZ);
+ size, 1000);
}
/*---------------------*/
From: Kan Liang <[email protected]>
commit f42e8a603c88f72bf047a710b9fc1d3579f31e71 upstream.
According to the latest uncore document, both NUM_OUTSTANDING_REQ_OF_CPU
(0x88) event and COMP_BUF_OCCUPANCY(0xd5) event also have constraints. Add
them into the event constraints table.
Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -4898,8 +4898,10 @@ static struct event_constraint icx_uncor
UNCORE_EVENT_CONSTRAINT(0x02, 0x3),
UNCORE_EVENT_CONSTRAINT(0x03, 0x3),
UNCORE_EVENT_CONSTRAINT(0x83, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0x88, 0xc),
UNCORE_EVENT_CONSTRAINT(0xc0, 0xc),
UNCORE_EVENT_CONSTRAINT(0xc5, 0xc),
+ UNCORE_EVENT_CONSTRAINT(0xd5, 0xc),
EVENT_CONSTRAINT_END
};
From: Marek Vasut <[email protected]>
commit 31f97cf9f0c31143a2a6fcc89c4a1286ce20157e upstream.
The module parameters are missing dev_oper_mode 12, BT classic alone,
add it. Moreover, the parameters encode newlines, which ends up being
printed malformed e.g. by modinfo, so fix that too.
However, the module parameter string is duplicated in both USB and SDIO
modules and the dev_oper_mode mode enumeration in those module parameters
is a duplicate of macros used by the driver. Furthermore, the enumeration
is confusing.
So, deduplicate the module parameter string and use __stringify() to
encode the correct mode enumeration values into the module parameter
string. Finally, replace 'Wi-Fi' with 'Wi-Fi alone' and 'BT' with
'BT classic alone' to clarify what those modes really mean.
Fixes: 898b255339310 ("rsi: add module parameter operating mode")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Amitkumar Karwar <[email protected]>
Cc: Angus Ainslie <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Kalle Valo <[email protected]>
Cc: Karun Eagalapati <[email protected]>
Cc: Martin Fuzzey <[email protected]>
Cc: Martin Kepplinger <[email protected]>
Cc: Prameela Rani Garnepudi <[email protected]>
Cc: Sebastian Krzyszkowiak <[email protected]>
Cc: Siva Rebbagondla <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.17+
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_sdio.c | 5 +----
drivers/net/wireless/rsi/rsi_91x_usb.c | 5 +----
drivers/net/wireless/rsi/rsi_hal.h | 11 +++++++++++
3 files changed, 13 insertions(+), 8 deletions(-)
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -24,10 +24,7 @@
/* Default operating mode is wlan STA + BT */
static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL;
module_param(dev_oper_mode, ushort, 0444);
-MODULE_PARM_DESC(dev_oper_mode,
- "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n"
- "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
- "6[AP + BT classic], 14[AP + BT classic + BT LE]");
+MODULE_PARM_DESC(dev_oper_mode, DEV_OPMODE_PARAM_DESC);
/**
* rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg.
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -25,10 +25,7 @@
/* Default operating mode is wlan STA + BT */
static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL;
module_param(dev_oper_mode, ushort, 0444);
-MODULE_PARM_DESC(dev_oper_mode,
- "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n"
- "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
- "6[AP + BT classic], 14[AP + BT classic + BT LE]");
+MODULE_PARM_DESC(dev_oper_mode, DEV_OPMODE_PARAM_DESC);
static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t flags);
--- a/drivers/net/wireless/rsi/rsi_hal.h
+++ b/drivers/net/wireless/rsi/rsi_hal.h
@@ -28,6 +28,17 @@
#define DEV_OPMODE_AP_BT 6
#define DEV_OPMODE_AP_BT_DUAL 14
+#define DEV_OPMODE_PARAM_DESC \
+ __stringify(DEV_OPMODE_WIFI_ALONE) "[Wi-Fi alone], " \
+ __stringify(DEV_OPMODE_BT_ALONE) "[BT classic alone], " \
+ __stringify(DEV_OPMODE_BT_LE_ALONE) "[BT LE alone], " \
+ __stringify(DEV_OPMODE_BT_DUAL) "[BT classic + BT LE alone], " \
+ __stringify(DEV_OPMODE_STA_BT) "[Wi-Fi STA + BT classic], " \
+ __stringify(DEV_OPMODE_STA_BT_LE) "[Wi-Fi STA + BT LE], " \
+ __stringify(DEV_OPMODE_STA_BT_DUAL) "[Wi-Fi STA + BT classic + BT LE], " \
+ __stringify(DEV_OPMODE_AP_BT) "[Wi-Fi AP + BT classic], " \
+ __stringify(DEV_OPMODE_AP_BT_DUAL) "[Wi-Fi AP + BT classic + BT LE]"
+
#define FLASH_WRITE_CHUNK_SIZE (4 * 1024)
#define FLASH_SECTOR_SIZE (4 * 1024)
From: Alok Prasad <[email protected]>
commit 4f960393a0ee9a39469ceb7c8077ae8db665cc12 upstream.
This patch fixes a crash caused by querying the QP via netlink, and
corrects the state of GSI qp. GSI qp's have a NULL qed_qp.
The call trace is generated by:
$ rdma res show
BUG: kernel NULL pointer dereference, address: 0000000000000034
Hardware name: Dell Inc. PowerEdge R720/0M1GCR, BIOS 1.2.6 05/10/2012
RIP: 0010:qed_rdma_query_qp+0x33/0x1a0 [qed]
RSP: 0018:ffffba560a08f580 EFLAGS: 00010206
RAX: 0000000200000000 RBX: ffffba560a08f5b8 RCX: 0000000000000000
RDX: ffffba560a08f5b8 RSI: 0000000000000000 RDI: ffff9807ee458090
RBP: ffffba560a08f5a0 R08: 0000000000000000 R09: ffff9807890e7048
R10: ffffba560a08f658 R11: 0000000000000000 R12: 0000000000000000
R13: ffff9807ee458090 R14: ffff9807f0afb000 R15: ffffba560a08f7ec
FS: 00007fbbf8bfe740(0000) GS:ffff980aafa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000034 CR3: 00000001720ba001 CR4: 00000000000606f0
Call Trace:
qedr_query_qp+0x82/0x360 [qedr]
ib_query_qp+0x34/0x40 [ib_core]
? ib_query_qp+0x34/0x40 [ib_core]
fill_res_qp_entry_query.isra.26+0x47/0x1d0 [ib_core]
? __nla_put+0x20/0x30
? nla_put+0x33/0x40
fill_res_qp_entry+0xe3/0x120 [ib_core]
res_get_common_dumpit+0x3f8/0x5d0 [ib_core]
? fill_res_cm_id_entry+0x1f0/0x1f0 [ib_core]
nldev_res_get_qp_dumpit+0x1a/0x20 [ib_core]
netlink_dump+0x156/0x2f0
__netlink_dump_start+0x1ab/0x260
rdma_nl_rcv+0x1de/0x330 [ib_core]
? nldev_res_get_cm_id_dumpit+0x20/0x20 [ib_core]
netlink_unicast+0x1b8/0x270
netlink_sendmsg+0x33e/0x470
sock_sendmsg+0x63/0x70
__sys_sendto+0x13f/0x180
? setup_sgl.isra.12+0x70/0xc0
__x64_sys_sendto+0x28/0x30
do_syscall_64+0x3a/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: [email protected]
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Shai Malin <[email protected]>
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Alok Prasad <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/qedr/verbs.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -2744,15 +2744,18 @@ int qedr_query_qp(struct ib_qp *ibqp,
int rc = 0;
memset(¶ms, 0, sizeof(params));
-
- rc = dev->ops->rdma_query_qp(dev->rdma_ctx, qp->qed_qp, ¶ms);
- if (rc)
- goto err;
-
memset(qp_attr, 0, sizeof(*qp_attr));
memset(qp_init_attr, 0, sizeof(*qp_init_attr));
- qp_attr->qp_state = qedr_get_ibqp_state(params.state);
+ if (qp->qp_type != IB_QPT_GSI) {
+ rc = dev->ops->rdma_query_qp(dev->rdma_ctx, qp->qed_qp, ¶ms);
+ if (rc)
+ goto err;
+ qp_attr->qp_state = qedr_get_ibqp_state(params.state);
+ } else {
+ qp_attr->qp_state = qedr_get_ibqp_state(QED_ROCE_QP_STATE_RTS);
+ }
+
qp_attr->cur_qp_state = qedr_get_ibqp_state(params.state);
qp_attr->path_mtu = ib_mtu_int_to_enum(params.mtu);
qp_attr->path_mig_state = IB_MIG_MIGRATED;
From: Johan Hovold <[email protected]>
commit 211cde4f5817dc88ef7f8f2fa286e57fbf14c8ee upstream.
Commit 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method")
added a hack to support SoCs where the UART reference clock can
change behind the back of the driver but failed to add the proper
locking.
First, make sure to take a reference to the tty struct to avoid
dereferencing a NULL pointer if the clock change races with a hangup.
Second, the termios semaphore must be held during the update to prevent
a racing termios change.
Fixes: 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method")
Fixes: c8dff3aa8241 ("serial: 8250: Skip uninitialized TTY port baud rate update")
Cc: [email protected] # 5.9
Cc: Serge Semin <[email protected]>
Tested-by: Serge Semin <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_port.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2675,21 +2675,32 @@ static unsigned int serial8250_get_baud_
void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk)
{
struct uart_8250_port *up = up_to_u8250p(port);
+ struct tty_port *tport = &port->state->port;
unsigned int baud, quot, frac = 0;
struct ktermios *termios;
+ struct tty_struct *tty;
unsigned long flags;
- mutex_lock(&port->state->port.mutex);
+ tty = tty_port_tty_get(tport);
+ if (!tty) {
+ mutex_lock(&tport->mutex);
+ port->uartclk = uartclk;
+ mutex_unlock(&tport->mutex);
+ return;
+ }
+
+ down_write(&tty->termios_rwsem);
+ mutex_lock(&tport->mutex);
if (port->uartclk == uartclk)
goto out_lock;
port->uartclk = uartclk;
- if (!tty_port_initialized(&port->state->port))
+ if (!tty_port_initialized(tport))
goto out_lock;
- termios = &port->state->port.tty->termios;
+ termios = &tty->termios;
baud = serial8250_get_baud_rate(port, termios, NULL);
quot = serial8250_get_divisor(port, baud, &frac);
@@ -2706,7 +2717,9 @@ void serial8250_update_uartclk(struct ua
serial8250_rpm_put(up);
out_lock:
- mutex_unlock(&port->state->port.mutex);
+ mutex_unlock(&tport->mutex);
+ up_write(&tty->termios_rwsem);
+ tty_kref_put(tty);
}
EXPORT_SYMBOL_GPL(serial8250_update_uartclk);
From: Johan Hovold <[email protected]>
commit 63b3e810eff65fb8587fcb26fa0b56802be12dcf upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Use the common control-message timeout defines for the five-second
timeouts.
Fixes: 97a6f772f36b ("drivers: most: add USB adapter driver")
Cc: [email protected] # 5.9
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/most/most_usb.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/most/most_usb.c
+++ b/drivers/most/most_usb.c
@@ -149,7 +149,8 @@ static inline int drci_rd_reg(struct usb
retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
DRCI_READ_REQ, req_type,
0x0000,
- reg, dma_buf, sizeof(*dma_buf), 5 * HZ);
+ reg, dma_buf, sizeof(*dma_buf),
+ USB_CTRL_GET_TIMEOUT);
*buf = le16_to_cpu(*dma_buf);
kfree(dma_buf);
@@ -176,7 +177,7 @@ static inline int drci_wr_reg(struct usb
reg,
NULL,
0,
- 5 * HZ);
+ USB_CTRL_SET_TIMEOUT);
}
static inline int start_sync_ep(struct usb_device *usb_dev, u16 ep)
From: Eric W. Biederman <[email protected]>
commit 7d613f9f72ec8f90ddefcae038fdae5adb8404b3 upstream.
The existence of sigkill_pending is a little silly as it is
functionally a duplicate of fatal_signal_pending that is used in
exactly one place.
Checking for pending fatal signals and returning early in ptrace_stop
is actively harmful. It casues the ptrace_stop called by
ptrace_signal to return early before setting current->exit_code.
Later when ptrace_signal reads the signal number from
current->exit_code is undefined, making it unpredictable what will
happen.
Instead rely on the fact that schedule will not sleep if there is a
pending signal that can awaken a task.
Removing the explict sigkill_pending test fixes fixes ptrace_signal
when ptrace_stop does not stop because current->exit_code is always
set to to signr.
Cc: [email protected]
Fixes: 3d749b9e676b ("ptrace: simplify ptrace_stop()->sigkill_pending() path")
Fixes: 1a669c2f16d4 ("Add arch_ptrace_stop")
Link: https://lkml.kernel.org/r/87pmsyx29t.fsf@disp2133
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/signal.c | 18 ++++--------------
1 file changed, 4 insertions(+), 14 deletions(-)
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2097,15 +2097,6 @@ static inline bool may_ptrace_stop(void)
return true;
}
-/*
- * Return non-zero if there is a SIGKILL that should be waking us up.
- * Called with the siglock held.
- */
-static bool sigkill_pending(struct task_struct *tsk)
-{
- return sigismember(&tsk->pending.signal, SIGKILL) ||
- sigismember(&tsk->signal->shared_pending.signal, SIGKILL);
-}
/*
* This must be called with current->sighand->siglock held.
@@ -2132,17 +2123,16 @@ static void ptrace_stop(int exit_code, i
* calling arch_ptrace_stop, so we must release it now.
* To preserve proper semantics, we must do this before
* any signal bookkeeping like checking group_stop_count.
- * Meanwhile, a SIGKILL could come in before we retake the
- * siglock. That must prevent us from sleeping in TASK_TRACED.
- * So after regaining the lock, we must check for SIGKILL.
*/
spin_unlock_irq(¤t->sighand->siglock);
arch_ptrace_stop(exit_code, info);
spin_lock_irq(¤t->sighand->siglock);
- if (sigkill_pending(current))
- return;
}
+ /*
+ * schedule() will not sleep if there is a pending signal that
+ * can awaken the task.
+ */
set_special_state(TASK_TRACED);
/*
From: Peter Zijlstra <[email protected]>
[ Upstream commit ce0b9c805dd66d5e49fd53ec5415ae398f4c56e6 ]
vmlinux.o: warning: objtool: look_up_lock_class()+0xc7: call to rcu_read_lock_any_held() leaves .noinstr.text section
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 5184f68968158..2823329143503 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -887,7 +887,7 @@ look_up_lock_class(const struct lockdep_map *lock, unsigned int subclass)
if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
return NULL;
- hlist_for_each_entry_rcu(class, hash_head, hash_entry) {
+ hlist_for_each_entry_rcu_notrace(class, hash_head, hash_entry) {
if (class->key == key) {
/*
* Huh! same key, different name? Did someone trample
--
2.33.0
From: Pali Rohár <[email protected]>
commit bc4fac42e5f8460af09c0a7f2f1915be09e20c71 upstream.
Aardvark supports PCIe Hot Reset via PCIE_CORE_CTRL1_REG.
Use it for implementing PCI_BRIDGE_CTL_BUS_RESET bit of PCI_BRIDGE_CONTROL
register on emulated bridge.
With this, the function pci_reset_secondary_bus() starts working and can
reset connected PCIe card. Custom userspace script [1] which uses setpci
can trigger PCIe Hot Reset and reset the card manually.
[1] https://alexforencich.com/wiki/en/pcie/hot-reset-linux
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -793,6 +793,22 @@ advk_pci_bridge_emul_base_conf_read(stru
*value = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
return PCI_BRIDGE_EMUL_HANDLED;
+ case PCI_INTERRUPT_LINE: {
+ /*
+ * From the whole 32bit register we support reading from HW only
+ * one bit: PCI_BRIDGE_CTL_BUS_RESET.
+ * Other bits are retrieved only from emulated config buffer.
+ */
+ __le32 *cfgspace = (__le32 *)&bridge->conf;
+ u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
+ if (advk_readl(pcie, PCIE_CORE_CTRL1_REG) & HOT_RESET_GEN)
+ val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
+ else
+ val &= ~(PCI_BRIDGE_CTL_BUS_RESET << 16);
+ *value = val;
+ return PCI_BRIDGE_EMUL_HANDLED;
+ }
+
default:
return PCI_BRIDGE_EMUL_NOT_HANDLED;
}
@@ -809,6 +825,17 @@ advk_pci_bridge_emul_base_conf_write(str
advk_writel(pcie, new, PCIE_CORE_CMD_STATUS_REG);
break;
+ case PCI_INTERRUPT_LINE:
+ if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
+ u32 val = advk_readl(pcie, PCIE_CORE_CTRL1_REG);
+ if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
+ val |= HOT_RESET_GEN;
+ else
+ val &= ~HOT_RESET_GEN;
+ advk_writel(pcie, val, PCIE_CORE_CTRL1_REG);
+ }
+ break;
+
default:
break;
}
From: Hans de Goede <[email protected]>
[ Upstream commit a53f1dd3ab9fec715c6c2e8e01bf4d3c07eef8e5 ]
The KD Kurio Smart C15200 2-in-1 uses a panel which has been mounted 90
degrees rotated. Add a quirk for this.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Simon Ser <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 5d0942e3985b2..cf4db2cdebbbd 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -205,6 +205,13 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
},
.driver_data = (void *)&itworks_tw891,
+ }, { /* KD Kurio Smart C15200 2-in-1 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "KD Interactive"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Kurio Smart"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "KDM960BCP"),
+ },
+ .driver_data = (void *)&lcd800x1280_rightside_up,
}, { /*
* Lenovo Ideapad Miix 310 laptop, only some production batches
* have a portrait screen, the resolution checks makes the quirk
--
2.33.0
From: Martin Fuzzey <[email protected]>
commit b515d097053a71d624e0c5840b42cd4caa653941 upstream.
P2P client mode was only working the first time.
On subsequent connection attempts the group was successfully created but
no data was sent (no transmitted data packets were seen with a sniffer).
The reason for this was that the hardware was being configured in fixed
rate mode with rate RSI_RATE_1 (1Mbps) which is not valid in the 5GHz band.
In P2P mode wpa_supplicant uses NL80211_CMD_SET_TX_BITRATE_MASK to disallow
the 11b rates in the 2.4GHz band which updated common->fixedrate_mask.
rsi_set_min_rate() then used the fixedrate_mask to calculate the minimum
allowed rate, or 0xffff = auto if none was found.
However that calculation did not account for the different rate sets
allowed in the different bands leading to the error.
Fixing set_min_rate() would result in 6Mb/s being used all the time
which is not what we want either.
The reason the problem did not occur on the first connection is that
rsi_mac80211_set_rate_mask() only updated the fixedrate_mask for
the *current* band. When it was called that was still 2.4GHz as the
switch is done later. So the when set_min_rate() was subsequently
called after the switch to 5GHz it still had a mask of zero, leading
to defaulting to auto mode.
Fix this by differentiating the case of a single rate being
requested, in which case the hardware will be used in fixed rate
mode with just that rate, and multiple rates being requested,
in which case we remain in auto mode but the firmware rate selection
algorithm is configured with a restricted set of rates.
Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Signed-off-by: Martin Fuzzey <[email protected]>
CC: [email protected]
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_hal.c | 8 +--
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 74 ++++++++--------------------
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 21 +++++--
drivers/net/wireless/rsi/rsi_main.h | 12 +++-
4 files changed, 50 insertions(+), 65 deletions(-)
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -214,15 +214,17 @@ int rsi_prepare_data_desc(struct rsi_com
RSI_WIFI_DATA_Q);
data_desc->header_len = ieee80211_size;
- if (common->min_rate != RSI_RATE_AUTO) {
+ if (common->rate_config[common->band].fixed_enabled) {
/* Send fixed rate */
+ u16 fixed_rate = common->rate_config[common->band].fixed_hw_rate;
+
data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);
- data_desc->rate_info = cpu_to_le16(common->min_rate);
+ data_desc->rate_info = cpu_to_le16(fixed_rate);
if (conf_is_ht40(&common->priv->hw->conf))
data_desc->bbp_info = cpu_to_le16(FULL40M_ENABLE);
- if ((common->vif_info[0].sgi) && (common->min_rate & 0x100)) {
+ if (common->vif_info[0].sgi && (fixed_rate & 0x100)) {
/* Only MCS rates */
data_desc->rate_info |=
cpu_to_le16(ENABLE_SHORTGI_RATE);
--- a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -510,7 +510,6 @@ static int rsi_mac80211_add_interface(st
if ((vif->type == NL80211_IFTYPE_AP) ||
(vif->type == NL80211_IFTYPE_P2P_GO)) {
rsi_send_rx_filter_frame(common, DISALLOW_BEACONS);
- common->min_rate = RSI_RATE_AUTO;
for (i = 0; i < common->max_stations; i++)
common->stations[i].sta = NULL;
}
@@ -1211,20 +1210,32 @@ static int rsi_mac80211_set_rate_mask(st
struct ieee80211_vif *vif,
const struct cfg80211_bitrate_mask *mask)
{
+ const unsigned int mcs_offset = ARRAY_SIZE(rsi_rates);
struct rsi_hw *adapter = hw->priv;
struct rsi_common *common = adapter->priv;
- enum nl80211_band band = hw->conf.chandef.chan->band;
+ int i;
mutex_lock(&common->mutex);
- common->fixedrate_mask[band] = 0;
- if (mask->control[band].legacy == 0xfff) {
- common->fixedrate_mask[band] =
- (mask->control[band].ht_mcs[0] << 12);
- } else {
- common->fixedrate_mask[band] =
- mask->control[band].legacy;
+ for (i = 0; i < ARRAY_SIZE(common->rate_config); i++) {
+ struct rsi_rate_config *cfg = &common->rate_config[i];
+ u32 bm;
+
+ bm = mask->control[i].legacy | (mask->control[i].ht_mcs[0] << mcs_offset);
+ if (hweight32(bm) == 1) { /* single rate */
+ int rate_index = ffs(bm) - 1;
+
+ if (rate_index < mcs_offset)
+ cfg->fixed_hw_rate = rsi_rates[rate_index].hw_value;
+ else
+ cfg->fixed_hw_rate = rsi_mcsrates[rate_index - mcs_offset];
+ cfg->fixed_enabled = true;
+ } else {
+ cfg->configured_mask = bm;
+ cfg->fixed_enabled = false;
+ }
}
+
mutex_unlock(&common->mutex);
return 0;
@@ -1361,46 +1372,6 @@ void rsi_indicate_pkt_to_os(struct rsi_c
ieee80211_rx_irqsafe(hw, skb);
}
-static void rsi_set_min_rate(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta,
- struct rsi_common *common)
-{
- u8 band = hw->conf.chandef.chan->band;
- u8 ii;
- u32 rate_bitmap;
- bool matched = false;
-
- common->bitrate_mask[band] = sta->supp_rates[band];
-
- rate_bitmap = (common->fixedrate_mask[band] & sta->supp_rates[band]);
-
- if (rate_bitmap & 0xfff) {
- /* Find out the min rate */
- for (ii = 0; ii < ARRAY_SIZE(rsi_rates); ii++) {
- if (rate_bitmap & BIT(ii)) {
- common->min_rate = rsi_rates[ii].hw_value;
- matched = true;
- break;
- }
- }
- }
-
- common->vif_info[0].is_ht = sta->ht_cap.ht_supported;
-
- if ((common->vif_info[0].is_ht) && (rate_bitmap >> 12)) {
- for (ii = 0; ii < ARRAY_SIZE(rsi_mcsrates); ii++) {
- if ((rate_bitmap >> 12) & BIT(ii)) {
- common->min_rate = rsi_mcsrates[ii];
- matched = true;
- break;
- }
- }
- }
-
- if (!matched)
- common->min_rate = 0xffff;
-}
-
/**
* rsi_mac80211_sta_add() - This function notifies driver about a peer getting
* connected.
@@ -1499,9 +1470,9 @@ static int rsi_mac80211_sta_add(struct i
if ((vif->type == NL80211_IFTYPE_STATION) ||
(vif->type == NL80211_IFTYPE_P2P_CLIENT)) {
- rsi_set_min_rate(hw, sta, common);
+ common->bitrate_mask[common->band] = sta->supp_rates[common->band];
+ common->vif_info[0].is_ht = sta->ht_cap.ht_supported;
if (sta->ht_cap.ht_supported) {
- common->vif_info[0].is_ht = true;
common->bitrate_mask[NL80211_BAND_2GHZ] =
sta->supp_rates[NL80211_BAND_2GHZ];
if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ||
@@ -1575,7 +1546,6 @@ static int rsi_mac80211_sta_remove(struc
bss->qos = sta->wme;
common->bitrate_mask[NL80211_BAND_2GHZ] = 0;
common->bitrate_mask[NL80211_BAND_5GHZ] = 0;
- common->min_rate = 0xffff;
common->vif_info[0].is_ht = false;
common->vif_info[0].sgi = false;
common->vif_info[0].seq_start = 0;
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -276,7 +276,7 @@ static void rsi_set_default_parameters(s
common->channel_width = BW_20MHZ;
common->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
common->channel = 1;
- common->min_rate = 0xffff;
+ memset(&common->rate_config, 0, sizeof(common->rate_config));
common->fsm_state = FSM_CARD_NOT_READY;
common->iface_down = true;
common->endpoint = EP_2GHZ_20MHZ;
@@ -1314,7 +1314,7 @@ static int rsi_send_auto_rate_request(st
u8 band = hw->conf.chandef.chan->band;
u8 num_supported_rates = 0;
u8 rate_table_offset, rate_offset = 0;
- u32 rate_bitmap;
+ u32 rate_bitmap, configured_rates;
u16 *selected_rates, min_rate;
bool is_ht = false, is_sgi = false;
u16 frame_len = sizeof(struct rsi_auto_rate);
@@ -1364,6 +1364,10 @@ static int rsi_send_auto_rate_request(st
is_sgi = true;
}
+ /* Limit to any rates administratively configured by cfg80211 */
+ configured_rates = common->rate_config[band].configured_mask ?: 0xffffffff;
+ rate_bitmap &= configured_rates;
+
if (band == NL80211_BAND_2GHZ) {
if ((rate_bitmap == 0) && (is_ht))
min_rate = RSI_RATE_MCS0;
@@ -1389,10 +1393,13 @@ static int rsi_send_auto_rate_request(st
num_supported_rates = jj;
if (is_ht) {
- for (ii = 0; ii < ARRAY_SIZE(mcs); ii++)
- selected_rates[jj++] = mcs[ii];
- num_supported_rates += ARRAY_SIZE(mcs);
- rate_offset += ARRAY_SIZE(mcs);
+ for (ii = 0; ii < ARRAY_SIZE(mcs); ii++) {
+ if (configured_rates & BIT(ii + ARRAY_SIZE(rsi_rates))) {
+ selected_rates[jj++] = mcs[ii];
+ num_supported_rates++;
+ rate_offset++;
+ }
+ }
}
sort(selected_rates, jj, sizeof(u16), &rsi_compare, NULL);
@@ -1482,7 +1489,7 @@ void rsi_inform_bss_status(struct rsi_co
qos_enable,
aid, sta_id,
vif);
- if (common->min_rate == 0xffff)
+ if (!common->rate_config[common->band].fixed_enabled)
rsi_send_auto_rate_request(common, sta, sta_id, vif);
if (opmode == RSI_OPMODE_STA &&
!(assoc_cap & WLAN_CAPABILITY_PRIVACY) &&
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -61,6 +61,7 @@ enum RSI_FSM_STATES {
extern u32 rsi_zone_enabled;
extern __printf(2, 3) void rsi_dbg(u32 zone, const char *fmt, ...);
+#define RSI_MAX_BANDS 2
#define RSI_MAX_VIFS 3
#define NUM_EDCA_QUEUES 4
#define IEEE80211_ADDR_LEN 6
@@ -230,6 +231,12 @@ struct rsi_9116_features {
u32 ps_options;
};
+struct rsi_rate_config {
+ u32 configured_mask; /* configured by mac80211 bits 0-11=legacy 12+ mcs */
+ u16 fixed_hw_rate;
+ bool fixed_enabled;
+};
+
struct rsi_common {
struct rsi_hw *priv;
struct vif_priv vif_info[RSI_MAX_VIFS];
@@ -255,8 +262,8 @@ struct rsi_common {
u8 channel_width;
u16 rts_threshold;
- u16 bitrate_mask[2];
- u32 fixedrate_mask[2];
+ u32 bitrate_mask[RSI_MAX_BANDS];
+ struct rsi_rate_config rate_config[RSI_MAX_BANDS];
u8 rf_reset;
struct transmit_q_stats tx_stats;
@@ -277,7 +284,6 @@ struct rsi_common {
u8 mac_id;
u8 radio_id;
u16 rate_pwr[20];
- u16 min_rate;
/* WMM algo related */
u8 selected_qnum;
From: Aleksander Jan Bajkowski <[email protected]>
[ Upstream commit 5ca9ce2ba4d5884cd94d1a856c675ab1242cd242 ]
Different SoCs have a different number of channels, e.g .:
* amazon-se has 10 channels,
* danube+ar9 have 20 channels,
* vr9 has 28 channels,
* ar10 has 24 channels.
We can read the ID register and, depending on the reported
number of channels, reset the appropriate number of channels.
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/xway/dma.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 24c6267f78698..e45077aecf83a 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -30,6 +30,7 @@
#define LTQ_DMA_PCTRL 0x44
#define LTQ_DMA_IRNEN 0xf4
+#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */
#define DMA_DESCPT BIT(3) /* descriptor complete irq */
#define DMA_TX BIT(8) /* TX channel direction */
#define DMA_CHAN_ON BIT(0) /* channel on / off bit */
@@ -40,7 +41,6 @@
#define DMA_POLL BIT(31) /* turn on channel polling */
#define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
#define DMA_2W_BURST BIT(1) /* 2 word burst length */
-#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
#define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
#define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
@@ -206,7 +206,7 @@ ltq_dma_init(struct platform_device *pdev)
{
struct clk *clk;
struct resource *res;
- unsigned id;
+ unsigned int id, nchannels;
int i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -228,17 +228,18 @@ ltq_dma_init(struct platform_device *pdev)
ltq_dma_w32(0, LTQ_DMA_IRNEN);
/* reset/configure each channel */
- for (i = 0; i < DMA_MAX_CHANNEL; i++) {
+ id = ltq_dma_r32(LTQ_DMA_ID);
+ nchannels = ((id & DMA_ID_CHNR) >> 20);
+ for (i = 0; i < nchannels; i++) {
ltq_dma_w32(i, LTQ_DMA_CS);
ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
}
- id = ltq_dma_r32(LTQ_DMA_ID);
dev_info(&pdev->dev,
"Init done - hw rev: %X, ports: %d, channels: %d\n",
- id & 0x1f, (id >> 16) & 0xf, id >> 20);
+ id & 0x1f, (id >> 16) & 0xf, nchannels);
return 0;
}
--
2.33.0
From: Pali Rohár <[email protected]>
commit 771153fc884f566a89af2d30033b7f3bc6e24e84 upstream.
>From very vague, ambiguous and incomplete information from Marvell we
deduced that the 32-bit Aardvark register at address 0x4
(PCIE_CORE_CMD_STATUS_REG), which is not documented for Root Complex mode
in the Functional Specification (only for Endpoint mode), controls two
16-bit PCIe registers: Command Register and Status Registers of PCIe Root
Port.
This means that bit 2 controls bus mastering and forwarding of memory and
I/O requests in the upstream direction. According to PCI specifications
bits [0:2] of Command Register, this should be by default disabled on
reset. So explicitly disable these bits at early setup of the Aardvark
driver.
Remove code which unconditionally enables all 3 bits and let kernel code
(via pci_set_master() function) to handle bus mastering of Root PCIe
Bridge via emulated PCI_COMMAND on emulated bridge.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected] # b2a56469d550 ("PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access")
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 54 +++++++++++++++++++++++-----------
1 file changed, 38 insertions(+), 16 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -30,9 +30,6 @@
/* PCIe core registers */
#define PCIE_CORE_DEV_ID_REG 0x0
#define PCIE_CORE_CMD_STATUS_REG 0x4
-#define PCIE_CORE_CMD_IO_ACCESS_EN BIT(0)
-#define PCIE_CORE_CMD_MEM_ACCESS_EN BIT(1)
-#define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2)
#define PCIE_CORE_DEV_REV_REG 0x8
#define PCIE_CORE_PCIEXP_CAP 0xc0
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
@@ -563,6 +560,11 @@ static void advk_pcie_setup_hw(struct ad
reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
advk_writel(pcie, reg, VENDOR_ID_REG);
+ /* Disable Root Bridge I/O space, memory space and bus mastering */
+ reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+ reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
+
/* Set Advanced Error Capabilities and Control PF0 register */
reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
@@ -660,19 +662,6 @@ static void advk_pcie_setup_hw(struct ad
advk_pcie_disable_ob_win(pcie, i);
advk_pcie_train_link(pcie);
-
- /*
- * FIXME: The following register update is suspicious. This register is
- * applicable only when the PCI controller is configured for Endpoint
- * mode, not as a Root Complex. But apparently when this code is
- * removed, some cards stop working. This should be investigated and
- * a comment explaining this should be put here.
- */
- reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
- reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
- PCIE_CORE_CMD_IO_ACCESS_EN |
- PCIE_CORE_CMD_MEM_IO_REQ_EN;
- advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
}
static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
@@ -793,6 +782,37 @@ static int advk_pcie_wait_pio(struct adv
return -ETIMEDOUT;
}
+static pci_bridge_emul_read_status_t
+advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
+ int reg, u32 *value)
+{
+ struct advk_pcie *pcie = bridge->data;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ *value = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+ return PCI_BRIDGE_EMUL_HANDLED;
+
+ default:
+ return PCI_BRIDGE_EMUL_NOT_HANDLED;
+ }
+}
+
+static void
+advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
+ int reg, u32 old, u32 new, u32 mask)
+{
+ struct advk_pcie *pcie = bridge->data;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ advk_writel(pcie, new, PCIE_CORE_CMD_STATUS_REG);
+ break;
+
+ default:
+ break;
+ }
+}
static pci_bridge_emul_read_status_t
advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
@@ -893,6 +913,8 @@ advk_pci_bridge_emul_pcie_conf_write(str
}
static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
+ .read_base = advk_pci_bridge_emul_base_conf_read,
+ .write_base = advk_pci_bridge_emul_base_conf_write,
.read_pcie = advk_pci_bridge_emul_pcie_conf_read,
.write_pcie = advk_pci_bridge_emul_pcie_conf_write,
};
From: Tao Zhang <[email protected]>
commit 692c9a499b286ea478f41b23a91fe3873b9e1326 upstream.
The input parameter of the function pm_runtime_put should be the
same in the function cti_enable_hw and cti_disable_hw. The correct
parameter to use here should be dev->parent.
Signed-off-by: Tao Zhang <[email protected]>
Reviewed-by: Leo Yan <[email protected]>
Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/coresight/coresight-cti-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hwtracing/coresight/coresight-cti-core.c
+++ b/drivers/hwtracing/coresight/coresight-cti-core.c
@@ -174,7 +174,7 @@ static int cti_disable_hw(struct cti_drv
coresight_disclaim_device_unlocked(drvdata->base);
CS_LOCK(drvdata->base);
spin_unlock(&drvdata->spinlock);
- pm_runtime_put(dev);
+ pm_runtime_put(dev->parent);
return 0;
/* not disabled this call */
From: Charan Teja Reddy <[email protected]>
[ Upstream commit f492283b157053e9555787262f058ae33096f568 ]
It is expected from the clients to follow the below steps on an imported
dmabuf fd:
a) dmabuf = dma_buf_get(fd) // Get the dmabuf from fd
b) dma_buf_attach(dmabuf); // Clients attach to the dmabuf
o Here the kernel does some slab allocations, say for
dma_buf_attachment and may be some other slab allocation in the
dmabuf->ops->attach().
c) Client may need to do dma_buf_map_attachment().
d) Accordingly dma_buf_unmap_attachment() should be called.
e) dma_buf_detach () // Clients detach to the dmabuf.
o Here the slab allocations made in b) are freed.
f) dma_buf_put(dmabuf) // Can free the dmabuf if it is the last
reference.
Now say an erroneous client failed at step c) above thus it directly
called dma_buf_put(), step f) above. Considering that it may be the last
reference to the dmabuf, buffer will be freed with pending attachments
left to the dmabuf which can show up as the 'memory leak'. This should
at least be reported as the WARN().
Signed-off-by: Charan Teja Reddy <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma-buf/dma-buf.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index 922416b3aaceb..93e9bf7382595 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -79,6 +79,7 @@ static void dma_buf_release(struct dentry *dentry)
if (dmabuf->resv == (struct dma_resv *)&dmabuf[1])
dma_resv_fini(dmabuf->resv);
+ WARN_ON(!list_empty(&dmabuf->attachments));
module_put(dmabuf->owner);
kfree(dmabuf->name);
kfree(dmabuf);
--
2.33.0
From: Pali Rohár <[email protected]>
commit 46ef6090dbf590711cb12680b6eafde5fa21fe87 upstream.
Commit 366697018c9a ("PCI: aardvark: Add PHY support") introduced
configuration of PCIe Reference clock via PCIE_CORE_REF_CLK_REG register,
but did it incorrectly.
PCIe Reference clock differential pair is routed from system board to
endpoint card, so on CPU side it has output direction. Therefore it is
required to enable transmitting and disable receiving.
Default configuration according to Armada 3700 Functional Specifications is
enabled receiver part and disabled transmitter.
We need this change because otherwise PCIe Reference clock is configured to
some undefined state when differential pair is used for both transmitting
and receiving.
Fix this by disabling receiver part.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 366697018c9a ("PCI: aardvark: Add PHY support")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -98,6 +98,7 @@
#define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10)
#define PCIE_CORE_REF_CLK_REG (CONTROL_BASE_ADDR + 0x14)
#define PCIE_CORE_REF_CLK_TX_ENABLE BIT(1)
+#define PCIE_CORE_REF_CLK_RX_ENABLE BIT(2)
#define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30)
#define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40)
#define PCIE_MSG_PM_PME_MASK BIT(7)
@@ -529,9 +530,15 @@ static void advk_pcie_setup_hw(struct ad
u32 reg;
int i;
- /* Enable TX */
+ /*
+ * Configure PCIe Reference clock. Direction is from the PCIe
+ * controller to the endpoint card, so enable transmitting of
+ * Reference clock differential signal off-chip and disable
+ * receiving off-chip differential signal.
+ */
reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
+ reg &= ~PCIE_CORE_REF_CLK_RX_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
/* Set to Direct mode */
From: Jakub Kicinski <[email protected]>
[ Upstream commit 1e080f17750d1083e8a32f7b350584ae1cd7ff20 ]
mq / mqprio make the default child qdiscs visible. They only do
so for the qdiscs which are within real_num_tx_queues when the
device is registered. Depending on order of calls in the driver,
or if user space changes config via ethtool -L the number of
qdiscs visible under tc qdisc show will differ from the number
of queues. This is confusing to users and potentially to system
configuration scripts which try to make sure qdiscs have the
right parameters.
Add a new Qdisc_ops callback and make relevant qdiscs TTRT.
Note that this uncovers the "shortcut" created by
commit 1f27cde313d7 ("net: sched: use pfifo_fast for non real queues")
The default child qdiscs beyond initial real_num_tx are always
pfifo_fast, no matter what the sysfs setting is. Fixing this
gets a little tricky because we'd need to keep a reference
on whatever the default qdisc was at the time of creation.
In practice this is likely an non-issue the qdiscs likely have
to be configured to non-default settings, so whatever user space
is doing such configuration can replace the pfifos... now that
it will see them.
Reported-by: Matthew Massey <[email protected]>
Reviewed-by: Dave Taht <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/sch_generic.h | 4 ++++
net/core/dev.c | 2 ++
net/sched/sch_generic.c | 9 +++++++++
net/sched/sch_mq.c | 24 ++++++++++++++++++++++++
net/sched/sch_mqprio.c | 23 +++++++++++++++++++++++
5 files changed, 62 insertions(+)
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index f8631ad3c8686..9226a84dcc14d 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -302,6 +302,8 @@ struct Qdisc_ops {
struct netlink_ext_ack *extack);
void (*attach)(struct Qdisc *sch);
int (*change_tx_queue_len)(struct Qdisc *, unsigned int);
+ void (*change_real_num_tx)(struct Qdisc *sch,
+ unsigned int new_real_tx);
int (*dump)(struct Qdisc *, struct sk_buff *);
int (*dump_stats)(struct Qdisc *, struct gnet_dump *);
@@ -683,6 +685,8 @@ void qdisc_class_hash_grow(struct Qdisc *, struct Qdisc_class_hash *);
void qdisc_class_hash_destroy(struct Qdisc_class_hash *);
int dev_qdisc_change_tx_queue_len(struct net_device *dev);
+void dev_qdisc_change_real_num_tx(struct net_device *dev,
+ unsigned int new_real_tx);
void dev_init_scheduler(struct net_device *dev);
void dev_shutdown(struct net_device *dev);
void dev_activate(struct net_device *dev);
diff --git a/net/core/dev.c b/net/core/dev.c
index e14294e9ba321..7dd7b9fb600c8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2973,6 +2973,8 @@ int netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
if (dev->num_tc)
netif_setup_tc(dev, txq);
+ dev_qdisc_change_real_num_tx(dev, txq);
+
dev->real_num_tx_queues = txq;
if (disabling) {
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 05aa2571a4095..6a9c1a39874a0 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -1303,6 +1303,15 @@ static int qdisc_change_tx_queue_len(struct net_device *dev,
return 0;
}
+void dev_qdisc_change_real_num_tx(struct net_device *dev,
+ unsigned int new_real_tx)
+{
+ struct Qdisc *qdisc = dev->qdisc;
+
+ if (qdisc->ops->change_real_num_tx)
+ qdisc->ops->change_real_num_tx(qdisc, new_real_tx);
+}
+
int dev_qdisc_change_tx_queue_len(struct net_device *dev)
{
bool up = dev->flags & IFF_UP;
diff --git a/net/sched/sch_mq.c b/net/sched/sch_mq.c
index e79f1afe0cfd6..db18d8a860f9c 100644
--- a/net/sched/sch_mq.c
+++ b/net/sched/sch_mq.c
@@ -125,6 +125,29 @@ static void mq_attach(struct Qdisc *sch)
priv->qdiscs = NULL;
}
+static void mq_change_real_num_tx(struct Qdisc *sch, unsigned int new_real_tx)
+{
+#ifdef CONFIG_NET_SCHED
+ struct net_device *dev = qdisc_dev(sch);
+ struct Qdisc *qdisc;
+ unsigned int i;
+
+ for (i = new_real_tx; i < dev->real_num_tx_queues; i++) {
+ qdisc = netdev_get_tx_queue(dev, i)->qdisc_sleeping;
+ /* Only update the default qdiscs we created,
+ * qdiscs with handles are always hashed.
+ */
+ if (qdisc != &noop_qdisc && !qdisc->handle)
+ qdisc_hash_del(qdisc);
+ }
+ for (i = dev->real_num_tx_queues; i < new_real_tx; i++) {
+ qdisc = netdev_get_tx_queue(dev, i)->qdisc_sleeping;
+ if (qdisc != &noop_qdisc && !qdisc->handle)
+ qdisc_hash_add(qdisc, false);
+ }
+#endif
+}
+
static int mq_dump(struct Qdisc *sch, struct sk_buff *skb)
{
struct net_device *dev = qdisc_dev(sch);
@@ -288,6 +311,7 @@ struct Qdisc_ops mq_qdisc_ops __read_mostly = {
.init = mq_init,
.destroy = mq_destroy,
.attach = mq_attach,
+ .change_real_num_tx = mq_change_real_num_tx,
.dump = mq_dump,
.owner = THIS_MODULE,
};
diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c
index 5eb3b1b7ae5e7..50e15add6068f 100644
--- a/net/sched/sch_mqprio.c
+++ b/net/sched/sch_mqprio.c
@@ -306,6 +306,28 @@ static void mqprio_attach(struct Qdisc *sch)
priv->qdiscs = NULL;
}
+static void mqprio_change_real_num_tx(struct Qdisc *sch,
+ unsigned int new_real_tx)
+{
+ struct net_device *dev = qdisc_dev(sch);
+ struct Qdisc *qdisc;
+ unsigned int i;
+
+ for (i = new_real_tx; i < dev->real_num_tx_queues; i++) {
+ qdisc = netdev_get_tx_queue(dev, i)->qdisc_sleeping;
+ /* Only update the default qdiscs we created,
+ * qdiscs with handles are always hashed.
+ */
+ if (qdisc != &noop_qdisc && !qdisc->handle)
+ qdisc_hash_del(qdisc);
+ }
+ for (i = dev->real_num_tx_queues; i < new_real_tx; i++) {
+ qdisc = netdev_get_tx_queue(dev, i)->qdisc_sleeping;
+ if (qdisc != &noop_qdisc && !qdisc->handle)
+ qdisc_hash_add(qdisc, false);
+ }
+}
+
static struct netdev_queue *mqprio_queue_get(struct Qdisc *sch,
unsigned long cl)
{
@@ -629,6 +651,7 @@ static struct Qdisc_ops mqprio_qdisc_ops __read_mostly = {
.init = mqprio_init,
.destroy = mqprio_destroy,
.attach = mqprio_attach,
+ .change_real_num_tx = mqprio_change_real_num_tx,
.dump = mqprio_dump,
.owner = THIS_MODULE,
};
--
2.33.0
From: Yang Yingliang <[email protected]>
commit c7892ae13e461ed20154321eb792e07ebe38f5b3 upstream.
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888020a7a680 (size 64):
comm "i2c-mcp23018-41", pid 23090, jiffies 4295160544 (age 8.680s)
hex dump (first 32 bytes):
00 48 d3 1e 80 88 ff ff 00 1a 56 c1 ff ff ff ff .H........V.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000083c79b35>] kmem_cache_alloc_trace+0x16d/0x360
[<0000000051803c95>] pinctrl_init_controller+0x6ed/0xb70
[<0000000064346707>] pinctrl_register+0x27/0x80
[<0000000029b0e186>] devm_pinctrl_register+0x5b/0xe0
[<00000000391f5a3e>] mcp23s08_probe_one+0x968/0x118a [pinctrl_mcp23s08]
[<000000006112c039>] mcp230xx_probe+0x266/0x560 [pinctrl_mcp23s08_i2c]
If pinctrl_claim_hogs() fails, the 'pindesc' allocated in pinctrl_register_one_pin()
need be freed.
Cc: [email protected]
Reported-by: Hulk Robot <[email protected]>
Fixes: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed work for hogs")
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -2077,6 +2077,8 @@ int pinctrl_enable(struct pinctrl_dev *p
if (error) {
dev_err(pctldev->dev, "could not claim hogs: %i\n",
error);
+ pinctrl_free_pindescs(pctldev, pctldev->desc->pins,
+ pctldev->desc->npins);
mutex_destroy(&pctldev->mutex);
kfree(pctldev);
From: Sebastian Krzyszkowiak <[email protected]>
commit 0cf48167b87e388fa1268c9fe6d2443ae7f43d8a upstream.
The gauge requires us to clear the status bits manually for some alerts
to be properly dismissed. Previously the IRQ was configured to react only
on falling edge, which wasn't technically correct (the ALRT line is active
low), but it had a happy side-effect of preventing interrupt storms
on uncleared alerts from happening.
Fixes: 7fbf6b731bca ("power: supply: max17042: Do not enforce (incorrect) interrupt trigger type")
Cc: <[email protected]>
Signed-off-by: Sebastian Krzyszkowiak <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/max17042_battery.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -875,6 +875,10 @@ static irqreturn_t max17042_thread_handl
max17042_set_soc_threshold(chip, 1);
}
+ /* we implicitly handle all alerts via power_supply_changed */
+ regmap_clear_bits(chip->regmap, MAX17042_STATUS,
+ 0xFFFF & ~(STATUS_POR_BIT | STATUS_BST_BIT));
+
power_supply_changed(chip->battery);
return IRQ_HANDLED;
}
From: Ricardo Ribalda <[email protected]>
[ Upstream commit e3f60e7e1a2b451f538f9926763432249bcf39c4 ]
All the entities must have a unique name. We can have a descriptive and
unique name by appending the function and the entity->id.
This is even resilent to multi chain devices.
Fixes v4l2-compliance:
Media Controller ioctls:
fail: v4l2-test-media.cpp(205): v2_entity_names_set.find(key) != v2_entity_names_set.end()
test MEDIA_IOC_G_TOPOLOGY: FAIL
fail: v4l2-test-media.cpp(394): num_data_links != num_links
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
Signed-off-by: Ricardo Ribalda <[email protected]>
Reviewed-by: Hans Verkuil <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_driver.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 282f3d2388cc2..447b6a198926e 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2065,6 +2065,7 @@ int uvc_register_video_device(struct uvc_device *dev,
const struct v4l2_file_operations *fops,
const struct v4l2_ioctl_ops *ioctl_ops)
{
+ const char *name;
int ret;
/* Initialize the video buffers queue. */
@@ -2093,16 +2094,20 @@ int uvc_register_video_device(struct uvc_device *dev,
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
default:
vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+ name = "Video Capture";
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
vdev->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+ name = "Video Output";
break;
case V4L2_BUF_TYPE_META_CAPTURE:
vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING;
+ name = "Metadata";
break;
}
- strscpy(vdev->name, dev->name, sizeof(vdev->name));
+ snprintf(vdev->name, sizeof(vdev->name), "%s %u", name,
+ stream->header.bTerminalLink);
/*
* Set the driver data before calling video_register_device, otherwise
--
2.33.0
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit d3c4b6f64ad356c0d9ddbcf73fa471e6a841cc5c ]
ACPICA commit 0762982923f95eb652cf7ded27356b247c9774de
During wakeup from system-wide sleep states, acpi_get_sleep_type_data()
is called and it tries to get memory from the slab allocator in order
to evaluate a control method, but if KFENCE is enabled in the kernel,
the memory allocation attempt causes an IRQ work to be queued and a
self-IPI to be sent to the CPU running the code which requires the
memory controller to be ready, so if that happens too early in the
wakeup path, it doesn't work.
Prevent that from taking place by calling acpi_get_sleep_type_data()
for S0 upfront, when preparing to enter a given sleep state, and
saving the data obtained by it for later use during system wakeup.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214271
Reported-by: Reik Keutterling <[email protected]>
Tested-by: Reik Keutterling <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/acglobal.h | 2 ++
drivers/acpi/acpica/hwesleep.c | 8 ++------
drivers/acpi/acpica/hwsleep.c | 11 ++++-------
drivers/acpi/acpica/hwxfsleep.c | 7 +++++++
4 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 2fee91f57b213..bd84d7f95e5f9 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -226,6 +226,8 @@ extern struct acpi_bit_register_info
acpi_gbl_bit_register_info[ACPI_NUM_BITREG];
ACPI_GLOBAL(u8, acpi_gbl_sleep_type_a);
ACPI_GLOBAL(u8, acpi_gbl_sleep_type_b);
+ACPI_GLOBAL(u8, acpi_gbl_sleep_type_a_s0);
+ACPI_GLOBAL(u8, acpi_gbl_sleep_type_b_s0);
/*****************************************************************************
*
diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index d9be5d0545d4c..4836a4b8b38b8 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -147,17 +147,13 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state)
acpi_status acpi_hw_extended_wake_prep(u8 sleep_state)
{
- acpi_status status;
u8 sleep_type_value;
ACPI_FUNCTION_TRACE(hw_extended_wake_prep);
- status = acpi_get_sleep_type_data(ACPI_STATE_S0,
- &acpi_gbl_sleep_type_a,
- &acpi_gbl_sleep_type_b);
- if (ACPI_SUCCESS(status)) {
+ if (acpi_gbl_sleep_type_a_s0 != ACPI_SLEEP_TYPE_INVALID) {
sleep_type_value =
- ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
+ ((acpi_gbl_sleep_type_a_s0 << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
(void)acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE),
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 317ae870336b7..fcc84d196238a 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -179,7 +179,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
{
- acpi_status status;
+ acpi_status status = AE_OK;
struct acpi_bit_register_info *sleep_type_reg_info;
struct acpi_bit_register_info *sleep_enable_reg_info;
u32 pm1a_control;
@@ -192,10 +192,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
* This is unclear from the ACPI Spec, but it is required
* by some machines.
*/
- status = acpi_get_sleep_type_data(ACPI_STATE_S0,
- &acpi_gbl_sleep_type_a,
- &acpi_gbl_sleep_type_b);
- if (ACPI_SUCCESS(status)) {
+ if (acpi_gbl_sleep_type_a_s0 != ACPI_SLEEP_TYPE_INVALID) {
sleep_type_reg_info =
acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE);
sleep_enable_reg_info =
@@ -216,9 +213,9 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
/* Insert the SLP_TYP bits */
- pm1a_control |= (acpi_gbl_sleep_type_a <<
+ pm1a_control |= (acpi_gbl_sleep_type_a_s0 <<
sleep_type_reg_info->bit_position);
- pm1b_control |= (acpi_gbl_sleep_type_b <<
+ pm1b_control |= (acpi_gbl_sleep_type_b_s0 <<
sleep_type_reg_info->bit_position);
/* Write the control registers and ignore any errors */
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index a4b66f4b27141..f1645d87864c3 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -217,6 +217,13 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
return_ACPI_STATUS(status);
}
+ status = acpi_get_sleep_type_data(ACPI_STATE_S0,
+ &acpi_gbl_sleep_type_a_s0,
+ &acpi_gbl_sleep_type_b_s0);
+ if (ACPI_FAILURE(status)) {
+ acpi_gbl_sleep_type_a_s0 = ACPI_SLEEP_TYPE_INVALID;
+ }
+
/* Execute the _PTS method (Prepare To Sleep) */
arg_list.count = 1;
--
2.33.0
From: Steven Rostedt (VMware) <[email protected]>
[ Upstream commit 49d67e445742bbcb03106b735b2ab39f6e5c56bc ]
The tracefs file system is by default mounted such that only root user can
access it. But there are legitimate reasons to create a group and allow
those added to the group to have access to tracing. By changing the
permissions of the tracefs mount point to allow access, it will allow
group access to the tracefs directory.
There should not be any real reason to allow all access to the tracefs
directory as it contains sensitive information. Have the default
permission of directories being created not have any OTH (other) bits set,
such that an admin that wants to give permission to a group has to first
disable all OTH bits in the file system.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/tracefs/inode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c
index 0ee8c6dfb0364..bf58ae6f984fe 100644
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -430,7 +430,8 @@ static struct dentry *__create_dir(const char *name, struct dentry *parent,
if (unlikely(!inode))
return failed_creating(dentry);
- inode->i_mode = S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO;
+ /* Do not set bits for OTH */
+ inode->i_mode = S_IFDIR | S_IRWXU | S_IRUSR| S_IRGRP | S_IXUSR | S_IXGRP;
inode->i_op = ops;
inode->i_fop = &simple_dir_operations;
--
2.33.0
From: Antoine Tenart <[email protected]>
[ Upstream commit 146e5e733310379f51924111068f08a3af0db830 ]
Due to deadlocks in the networking subsystem spotted 12 years ago[1],
a workaround was put in place[2] to avoid taking the rtnl lock when it
was not available and restarting the syscall (back to VFS, letting
userspace spin). The following construction is found a lot in the net
sysfs and sysctl code:
if (!rtnl_trylock())
return restart_syscall();
This can be problematic when multiple userspace threads use such
interfaces in a short period, making them to spin a lot. This happens
for example when adding and moving virtual interfaces: userspace
programs listening on events, such as systemd-udevd and NetworkManager,
do trigger actions reading files in sysfs. It gets worse when a lot of
virtual interfaces are created concurrently, say when creating
containers at boot time.
Returning early without hitting the above pattern when the syscall will
fail eventually does make things better. While it is not a fix for the
issue, it does ease things.
[1] https://lore.kernel.org/netdev/[email protected]/
https://lore.kernel.org/netdev/[email protected]/
and https://lore.kernel.org/netdev/20090226084924.16cb3e08@nehalam/
[2] Rightfully, those deadlocks are *hard* to solve.
Signed-off-by: Antoine Tenart <[email protected]>
Reviewed-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/net-sysfs.c | 55 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index cc5f760c78250..af59123601055 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -175,6 +175,14 @@ static int change_carrier(struct net_device *dev, unsigned long new_carrier)
static ssize_t carrier_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t len)
{
+ struct net_device *netdev = to_net_dev(dev);
+
+ /* The check is also done in change_carrier; this helps returning early
+ * without hitting the trylock/restart in netdev_store.
+ */
+ if (!netdev->netdev_ops->ndo_change_carrier)
+ return -EOPNOTSUPP;
+
return netdev_store(dev, attr, buf, len, change_carrier);
}
@@ -196,6 +204,12 @@ static ssize_t speed_show(struct device *dev,
struct net_device *netdev = to_net_dev(dev);
int ret = -EINVAL;
+ /* The check is also done in __ethtool_get_link_ksettings; this helps
+ * returning early without hitting the trylock/restart below.
+ */
+ if (!netdev->ethtool_ops->get_link_ksettings)
+ return ret;
+
if (!rtnl_trylock())
return restart_syscall();
@@ -216,6 +230,12 @@ static ssize_t duplex_show(struct device *dev,
struct net_device *netdev = to_net_dev(dev);
int ret = -EINVAL;
+ /* The check is also done in __ethtool_get_link_ksettings; this helps
+ * returning early without hitting the trylock/restart below.
+ */
+ if (!netdev->ethtool_ops->get_link_ksettings)
+ return ret;
+
if (!rtnl_trylock())
return restart_syscall();
@@ -468,6 +488,14 @@ static ssize_t proto_down_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
+ struct net_device *netdev = to_net_dev(dev);
+
+ /* The check is also done in change_proto_down; this helps returning
+ * early without hitting the trylock/restart in netdev_store.
+ */
+ if (!netdev->netdev_ops->ndo_change_proto_down)
+ return -EOPNOTSUPP;
+
return netdev_store(dev, attr, buf, len, change_proto_down);
}
NETDEVICE_SHOW_RW(proto_down, fmt_dec);
@@ -478,6 +506,12 @@ static ssize_t phys_port_id_show(struct device *dev,
struct net_device *netdev = to_net_dev(dev);
ssize_t ret = -EINVAL;
+ /* The check is also done in dev_get_phys_port_id; this helps returning
+ * early without hitting the trylock/restart below.
+ */
+ if (!netdev->netdev_ops->ndo_get_phys_port_id)
+ return -EOPNOTSUPP;
+
if (!rtnl_trylock())
return restart_syscall();
@@ -500,6 +534,13 @@ static ssize_t phys_port_name_show(struct device *dev,
struct net_device *netdev = to_net_dev(dev);
ssize_t ret = -EINVAL;
+ /* The checks are also done in dev_get_phys_port_name; this helps
+ * returning early without hitting the trylock/restart below.
+ */
+ if (!netdev->netdev_ops->ndo_get_phys_port_name &&
+ !netdev->netdev_ops->ndo_get_devlink_port)
+ return -EOPNOTSUPP;
+
if (!rtnl_trylock())
return restart_syscall();
@@ -522,6 +563,14 @@ static ssize_t phys_switch_id_show(struct device *dev,
struct net_device *netdev = to_net_dev(dev);
ssize_t ret = -EINVAL;
+ /* The checks are also done in dev_get_phys_port_name; this helps
+ * returning early without hitting the trylock/restart below. This works
+ * because recurse is false when calling dev_get_port_parent_id.
+ */
+ if (!netdev->netdev_ops->ndo_get_port_parent_id &&
+ !netdev->netdev_ops->ndo_get_devlink_port)
+ return -EOPNOTSUPP;
+
if (!rtnl_trylock())
return restart_syscall();
@@ -1179,6 +1228,12 @@ static ssize_t tx_maxrate_store(struct netdev_queue *queue,
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ /* The check is also done later; this helps returning early without
+ * hitting the trylock/restart below.
+ */
+ if (!dev->netdev_ops->ndo_set_tx_maxrate)
+ return -EOPNOTSUPP;
+
err = kstrtou32(buf, 10, &rate);
if (err < 0)
return err;
--
2.33.0
From: Tuo Li <[email protected]>
[ Upstream commit 4b6012a7830b813799a7faf40daa02a837e0fd5b ]
kzalloc() is used to allocate memory for cd->detectors, and if it fails,
channel_detector_exit() behind the label fail will be called:
channel_detector_exit(dpd, cd);
In channel_detector_exit(), cd->detectors is dereferenced through:
struct pri_detector *de = cd->detectors[i];
To fix this possible null-pointer dereference, check cd->detectors before
the for loop to dereference cd->detectors.
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Tuo Li <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/dfs_pattern_detector.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index 0813473793df1..87369073098c8 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -182,10 +182,12 @@ static void channel_detector_exit(struct dfs_pattern_detector *dpd,
if (cd == NULL)
return;
list_del(&cd->head);
- for (i = 0; i < dpd->num_radar_types; i++) {
- struct pri_detector *de = cd->detectors[i];
- if (de != NULL)
- de->exit(de);
+ if (cd->detectors) {
+ for (i = 0; i < dpd->num_radar_types; i++) {
+ struct pri_detector *de = cd->detectors[i];
+ if (de != NULL)
+ de->exit(de);
+ }
}
kfree(cd->detectors);
kfree(cd);
--
2.33.0
From: Xin Xiong <[email protected]>
[ Upstream commit 8105c2abbf36296bf38ca44f55ee45d160db476a ]
The issue happens in several error handling paths on two refcounted
object related to the object "host" (dma_chan_rx, dma_chan_tx). In
these paths, the function forgets to decrement one or both objects'
reference count increased earlier by dma_request_chan(), causing
reference count leaks.
Fix it by balancing the refcounts of both objects in some error
handling paths. In correspondence with the changes in moxart_probe(),
IS_ERR() is replaced with IS_ERR_OR_NULL() in moxart_remove() as well.
Signed-off-by: Xin Xiong <[email protected]>
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/moxart-mmc.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index 2e4a7c6971dc9..dcd128ecdf15b 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -624,6 +624,14 @@ static int moxart_probe(struct platform_device *pdev)
ret = -EPROBE_DEFER;
goto out;
}
+ if (!IS_ERR(host->dma_chan_tx)) {
+ dma_release_channel(host->dma_chan_tx);
+ host->dma_chan_tx = NULL;
+ }
+ if (!IS_ERR(host->dma_chan_rx)) {
+ dma_release_channel(host->dma_chan_rx);
+ host->dma_chan_rx = NULL;
+ }
dev_dbg(dev, "PIO mode transfer enabled\n");
host->have_dma = false;
} else {
@@ -678,6 +686,10 @@ static int moxart_probe(struct platform_device *pdev)
return 0;
out:
+ if (!IS_ERR_OR_NULL(host->dma_chan_tx))
+ dma_release_channel(host->dma_chan_tx);
+ if (!IS_ERR_OR_NULL(host->dma_chan_rx))
+ dma_release_channel(host->dma_chan_rx);
if (mmc)
mmc_free_host(mmc);
return ret;
@@ -690,9 +702,9 @@ static int moxart_remove(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, NULL);
- if (!IS_ERR(host->dma_chan_tx))
+ if (!IS_ERR_OR_NULL(host->dma_chan_tx))
dma_release_channel(host->dma_chan_tx);
- if (!IS_ERR(host->dma_chan_rx))
+ if (!IS_ERR_OR_NULL(host->dma_chan_rx))
dma_release_channel(host->dma_chan_rx);
mmc_remove_host(mmc);
mmc_free_host(mmc);
--
2.33.0
From: André Almeida <[email protected]>
[ Upstream commit 2835f327bd1240508db2c89fe94a056faa53c49a ]
Some buggy firmware and/or brand new batteries can support a charge that's
slightly over the reported design capacity. In such cases, the kernel will
report to userspace that the charging state of the battery is "Unknown",
when in reality the battery charge is "Full", at least from the design
capacity point of view. Make the fallback condition accepts capacities
over the designed capacity so userspace knows that is full.
Signed-off-by: André Almeida <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 08ee1c7b12e00..e04352c1dc2ce 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -174,7 +174,7 @@ static int acpi_battery_is_charged(struct acpi_battery *battery)
return 1;
/* fallback to using design values for broken batteries */
- if (battery->design_capacity == battery->capacity_now)
+ if (battery->design_capacity <= battery->capacity_now)
return 1;
/* we don't do any sort of metric based on percentages */
--
2.33.0
From: Andreas Gruenbacher <[email protected]>
[ Upstream commit 814a66741b9ffb5e1ba119e368b178edb0b7322d ]
Both iov_iter_get_pages and iov_iter_get_pages_alloc return the number
of bytes of the iovec they could get the pages for. When they cannot
get any pages, they're supposed to return 0, but when the start of the
iovec isn't page aligned, the calculation goes wrong and they return a
negative value. Fix both functions.
In addition, change iov_iter_get_pages_alloc to return NULL in that case
to prevent resource leaks.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/iov_iter.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/lib/iov_iter.c b/lib/iov_iter.c
index 537bfdc8cd095..b364231b5fc8c 100644
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -1343,7 +1343,7 @@ ssize_t iov_iter_get_pages(struct iov_iter *i,
res = get_user_pages_fast(addr, n,
iov_iter_rw(i) != WRITE ? FOLL_WRITE : 0,
pages);
- if (unlikely(res < 0))
+ if (unlikely(res <= 0))
return res;
return (res == n ? len : res * PAGE_SIZE) - *start;
0;}),({
@@ -1424,8 +1424,9 @@ ssize_t iov_iter_get_pages_alloc(struct iov_iter *i,
return -ENOMEM;
res = get_user_pages_fast(addr, n,
iov_iter_rw(i) != WRITE ? FOLL_WRITE : 0, p);
- if (unlikely(res < 0)) {
+ if (unlikely(res <= 0)) {
kvfree(p);
+ *pages = NULL;
return res;
}
*pages = p;
--
2.33.0
From: Sriram R <[email protected]>
[ Upstream commit 69a0fcf8a9f2273040d03e5ee77c9689c09e9d3a ]
During firmware recovery, the default reg rules which are
received via WMI_REG_CHAN_LIST_CC_EVENT can overwrite
the currently configured user regd.
See below snap for example,
root@OpenWrt:/# iw reg get | grep country
country FR: DFS-ETSI
country FR: DFS-ETSI
country FR: DFS-ETSI
country FR: DFS-ETSI
root@OpenWrt:/# echo assert > /sys/kernel/debug/ath11k/ipq8074\ hw2.0/simulate_f
w_crash
<snip>
[ 5290.471696] ath11k c000000.wifi1: pdev 1 successfully recovered
root@OpenWrt:/# iw reg get | grep country
country FR: DFS-ETSI
country US: DFS-FCC
country US: DFS-FCC
country US: DFS-FCC
In the above, the user configured country 'FR' is overwritten
when the rules of default country 'US' are received and updated during
recovery. Hence avoid processing of these rules in general
during firmware recovery as they have been already applied during
driver registration or after last set user country is configured.
This scenario applies for both AP and STA devices basically because
cfg80211 is not aware of the recovery and only the driver recovers, but
changing or resetting of the reg domain during recovery is not needed so
as to continue with the configured regdomain currently in use.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sriram R <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index fca71e00123d9..2f777d61f9065 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5362,6 +5362,17 @@ static int ath11k_reg_chan_list_event(struct ath11k_base *ab, struct sk_buff *sk
pdev_idx = reg_info->phy_id;
+ /* Avoid default reg rule updates sent during FW recovery if
+ * it is already available
+ */
+ spin_lock(&ab->base_lock);
+ if (test_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags) &&
+ ab->default_regd[pdev_idx]) {
+ spin_unlock(&ab->base_lock);
+ goto mem_free;
+ }
+ spin_unlock(&ab->base_lock);
+
if (pdev_idx >= ab->num_radios) {
/* Process the event for phy0 only if single_pdev_only
* is true. If pdev_idx is valid but not 0, discard the
--
2.33.0
From: Baochen Qiang <[email protected]>
[ Upstream commit 86a03dad0f5ad8182ed5fcf7bf3eec71cd96577c ]
For fragmented packets, ath11k reassembles each fragment as a normal
packet and then reinjects it into HW ring. In this case, the DMA
direction should be DMA_TO_DEVICE, not DMA_FROM_DEVICE, otherwise
invalid payload will be reinjected to HW and then delivered to host.
What is more, since arbitrary memory could be allocated to the frame, we
don't know what kind of data is contained in the buffer reinjected.
Thus, as a bad result, private info may be leaked.
Note that this issue is only found on Intel platform.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Baochen Qiang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/dp_rx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index 2bff8eb507d4d..7d6fd8155bb22 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -3273,7 +3273,7 @@ static int ath11k_dp_rx_h_defrag_reo_reinject(struct ath11k *ar, struct dp_rx_ti
paddr = dma_map_single(ab->dev, defrag_skb->data,
defrag_skb->len + skb_tailroom(defrag_skb),
- DMA_FROM_DEVICE);
+ DMA_TO_DEVICE);
if (dma_mapping_error(ab->dev, paddr))
return -ENOMEM;
@@ -3338,7 +3338,7 @@ err_free_idr:
spin_unlock_bh(&rx_refill_ring->idr_lock);
err_unmap_dma:
dma_unmap_single(ab->dev, paddr, defrag_skb->len + skb_tailroom(defrag_skb),
- DMA_FROM_DEVICE);
+ DMA_TO_DEVICE);
return ret;
}
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit dbb4cfea6efe979ed153bd59a6a527a90d3d0ab3 ]
The interrupt handling should be related to the firmware version. If
the driver matches an old firmware, then the driver should not handle
interrupt such as i2c or dma, otherwise it will cause some errors.
This log reveals it:
[ 27.708641] INFO: trying to register non-static key.
[ 27.710851] The code is fine but needs lockdep annotation, or maybe
[ 27.712010] you didn't initialize this object before use?
[ 27.712396] turning off the locking correctness validator.
[ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169
[ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 27.714149] Call Trace:
[ 27.714329] <IRQ>
[ 27.714480] dump_stack+0xba/0xf5
[ 27.714737] register_lock_class+0x873/0x8f0
[ 27.715052] ? __lock_acquire+0x323/0x1930
[ 27.715353] __lock_acquire+0x75/0x1930
[ 27.715636] lock_acquire+0x1dd/0x3e0
[ 27.715905] ? netup_i2c_interrupt+0x19/0x310
[ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60
[ 27.716544] ? netup_i2c_interrupt+0x19/0x310
[ 27.716863] netup_i2c_interrupt+0x19/0x310
[ 27.717178] netup_unidvb_isr+0xd3/0x160
[ 27.717467] __handle_irq_event_percpu+0x53/0x3e0
[ 27.717808] handle_irq_event_percpu+0x35/0x90
[ 27.718129] handle_irq_event+0x39/0x60
[ 27.718409] handle_fasteoi_irq+0xc2/0x1d0
[ 27.718707] __common_interrupt+0x7f/0x150
[ 27.719008] common_interrupt+0xb4/0xd0
[ 27.719289] </IRQ>
[ 27.719446] asm_common_interrupt+0x1e/0x40
[ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20
[ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6
[ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6
[ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001
[ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408
[ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000
[ 27.724289] default_idle+0x9/0x10
[ 27.724537] arch_cpu_idle+0xa/0x10
[ 27.724791] default_idle_call+0x6e/0x250
[ 27.725082] do_idle+0x1f0/0x2d0
[ 27.725326] cpu_startup_entry+0x18/0x20
[ 27.725613] start_secondary+0x11f/0x160
[ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb
[ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002
[ 27.726768] #PF: supervisor read access in kernel mode
[ 27.727138] #PF: error_code(0x0000) - not-present page
[ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0
[ 27.727999] Oops: 0000 [#1] PREEMPT SMP PTI
[ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169
[ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310
[ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02
[ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046
[ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000
[ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8
[ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001
[ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000
[ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400
[ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0
[ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 27.736744] Call Trace:
[ 27.736924] <IRQ>
[ 27.737074] netup_unidvb_isr+0xd3/0x160
[ 27.737363] __handle_irq_event_percpu+0x53/0x3e0
[ 27.737706] handle_irq_event_percpu+0x35/0x90
[ 27.738028] handle_irq_event+0x39/0x60
[ 27.738306] handle_fasteoi_irq+0xc2/0x1d0
[ 27.738602] __common_interrupt+0x7f/0x150
[ 27.738899] common_interrupt+0xb4/0xd0
[ 27.739176] </IRQ>
[ 27.739331] asm_common_interrupt+0x1e/0x40
[ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20
[ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6
[ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6
[ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001
[ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408
[ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000
[ 27.744157] default_idle+0x9/0x10
[ 27.744405] arch_cpu_idle+0xa/0x10
[ 27.744658] default_idle_call+0x6e/0x250
[ 27.744948] do_idle+0x1f0/0x2d0
[ 27.745190] cpu_startup_entry+0x18/0x20
[ 27.745475] start_secondary+0x11f/0x160
[ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb
[ 27.746123] Modules linked in:
[ 27.746348] Dumping ftrace buffer:
[ 27.746596] (ftrace buffer empty)
[ 27.746852] CR2: 0000000000000002
[ 27.747094] ---[ end trace ebafd46f83ab946d ]---
[ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310
[ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02
[ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046
[ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000
[ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8
[ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001
[ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000
[ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400
[ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0
[ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt
[ 27.755033] Dumping ftrace buffer:
[ 27.755279] (ftrace buffer empty)
[ 27.755534] Kernel Offset: disabled
[ 27.755785] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../pci/netup_unidvb/netup_unidvb_core.c | 27 +++++++++++--------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index 6f3125c2d0976..77bae14685513 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -258,19 +258,24 @@ static irqreturn_t netup_unidvb_isr(int irq, void *dev_id)
if ((reg40 & AVL_IRQ_ASSERTED) != 0) {
/* IRQ is being signaled */
reg_isr = readw(ndev->bmmio0 + REG_ISR);
- if (reg_isr & NETUP_UNIDVB_IRQ_I2C0) {
- iret = netup_i2c_interrupt(&ndev->i2c[0]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_I2C1) {
- iret = netup_i2c_interrupt(&ndev->i2c[1]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_SPI) {
+ if (reg_isr & NETUP_UNIDVB_IRQ_SPI)
iret = netup_spi_interrupt(ndev->spi);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA1) {
- iret = netup_dma_interrupt(&ndev->dma[0]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA2) {
- iret = netup_dma_interrupt(&ndev->dma[1]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_CI) {
- iret = netup_ci_interrupt(ndev);
+ else if (!ndev->old_fw) {
+ if (reg_isr & NETUP_UNIDVB_IRQ_I2C0) {
+ iret = netup_i2c_interrupt(&ndev->i2c[0]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_I2C1) {
+ iret = netup_i2c_interrupt(&ndev->i2c[1]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA1) {
+ iret = netup_dma_interrupt(&ndev->dma[0]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA2) {
+ iret = netup_dma_interrupt(&ndev->dma[1]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_CI) {
+ iret = netup_ci_interrupt(ndev);
+ } else {
+ goto err;
+ }
} else {
+err:
dev_err(&pci_dev->dev,
"%s(): unknown interrupt 0x%x\n",
__func__, reg_isr);
--
2.33.0
From: Dirk Bender <[email protected]>
[ Upstream commit 0961ba6dd211a4a52d1dd4c2d59be60ac2dc08c7 ]
To prevent corrupted frames after starting and stopping the sensor its
datasheet specifies a specific pause sequence to follow:
Stopping:
Set Pause_Restart Bit -> Set Restart Bit -> Set Chip_Enable Off
Restarting:
Set Chip_Enable On -> Clear Pause_Restart Bit
The Restart Bit is cleared automatically and must not be cleared
manually as this would cause undefined behavior.
Signed-off-by: Dirk Bender <[email protected]>
Signed-off-by: Stefan Riedmueller <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/mt9p031.c | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index dc23b9ed510a4..18440c5104ad9 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -78,7 +78,9 @@
#define MT9P031_PIXEL_CLOCK_INVERT (1 << 15)
#define MT9P031_PIXEL_CLOCK_SHIFT(n) ((n) << 8)
#define MT9P031_PIXEL_CLOCK_DIVIDE(n) ((n) << 0)
-#define MT9P031_FRAME_RESTART 0x0b
+#define MT9P031_RESTART 0x0b
+#define MT9P031_FRAME_PAUSE_RESTART (1 << 1)
+#define MT9P031_FRAME_RESTART (1 << 0)
#define MT9P031_SHUTTER_DELAY 0x0c
#define MT9P031_RST 0x0d
#define MT9P031_RST_ENABLE 1
@@ -445,9 +447,23 @@ static int mt9p031_set_params(struct mt9p031 *mt9p031)
static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ int val;
int ret;
if (!enable) {
+ /* enable pause restart */
+ val = MT9P031_FRAME_PAUSE_RESTART;
+ ret = mt9p031_write(client, MT9P031_RESTART, val);
+ if (ret < 0)
+ return ret;
+
+ /* enable restart + keep pause restart set */
+ val |= MT9P031_FRAME_RESTART;
+ ret = mt9p031_write(client, MT9P031_RESTART, val);
+ if (ret < 0)
+ return ret;
+
/* Stop sensor readout */
ret = mt9p031_set_output_control(mt9p031,
MT9P031_OUTPUT_CONTROL_CEN, 0);
@@ -467,6 +483,16 @@ static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable)
if (ret < 0)
return ret;
+ /*
+ * - clear pause restart
+ * - don't clear restart as clearing restart manually can cause
+ * undefined behavior
+ */
+ val = MT9P031_FRAME_RESTART;
+ ret = mt9p031_write(client, MT9P031_RESTART, val);
+ if (ret < 0)
+ return ret;
+
return mt9p031_pll_enable(mt9p031);
}
--
2.33.0
From: Alagu Sankar <[email protected]>
[ Upstream commit e263bdab9c0e8025fb7f41f153709a9cda51f6b6 ]
Beacon buffer for high latency devices does not use DMA. other similar
buffer allocation methods in the driver have already been modified for
high latency path. Fix the beacon buffer allocation left out in the
earlier high latency changes.
Signed-off-by: Alagu Sankar <[email protected]>
Signed-off-by: Erik Stromdahl <[email protected]>
[fabio: adapt it to use ar->bus_param.dev_type ]
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 31 ++++++++++++++++++++-------
1 file changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 36183fdfb7f03..90dc48f66fbfe 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -982,8 +982,12 @@ static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif)
ath10k_mac_vif_beacon_free(arvif);
if (arvif->beacon_buf) {
- dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
- arvif->beacon_buf, arvif->beacon_paddr);
+ if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL)
+ kfree(arvif->beacon_buf);
+ else
+ dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
+ arvif->beacon_buf,
+ arvif->beacon_paddr);
arvif->beacon_buf = NULL;
}
}
@@ -5466,10 +5470,17 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
if (vif->type == NL80211_IFTYPE_ADHOC ||
vif->type == NL80211_IFTYPE_MESH_POINT ||
vif->type == NL80211_IFTYPE_AP) {
- arvif->beacon_buf = dma_alloc_coherent(ar->dev,
- IEEE80211_MAX_FRAME_LEN,
- &arvif->beacon_paddr,
- GFP_ATOMIC);
+ if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
+ arvif->beacon_buf = kmalloc(IEEE80211_MAX_FRAME_LEN,
+ GFP_KERNEL);
+ arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
+ } else {
+ arvif->beacon_buf =
+ dma_alloc_coherent(ar->dev,
+ IEEE80211_MAX_FRAME_LEN,
+ &arvif->beacon_paddr,
+ GFP_ATOMIC);
+ }
if (!arvif->beacon_buf) {
ret = -ENOMEM;
ath10k_warn(ar, "failed to allocate beacon buffer: %d\n",
@@ -5684,8 +5695,12 @@ err_vdev_delete:
err:
if (arvif->beacon_buf) {
- dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
- arvif->beacon_buf, arvif->beacon_paddr);
+ if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL)
+ kfree(arvif->beacon_buf);
+ else
+ dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
+ arvif->beacon_buf,
+ arvif->beacon_paddr);
arvif->beacon_buf = NULL;
}
--
2.33.0
From: Jonas Dreßler <[email protected]>
[ Upstream commit c2e9666cdffd347460a2b17988db4cfaf2a68fb9 ]
We currently handle changing from the P2P to the STATION virtual
interface type slightly different than changing from P2P to ADHOC: When
changing to STATION, we don't send the SET_BSS_MODE command. We do send
that command on all other type-changes though, and it probably makes
sense to send the command since after all we just changed our BSS_MODE.
Looking at prior changes to this part of the code, it seems that this is
simply a leftover from old refactorings.
Since sending the SET_BSS_MODE command is the only difference between
mwifiex_change_vif_to_sta_adhoc() and the current code, we can now use
mwifiex_change_vif_to_sta_adhoc() for both switching to ADHOC and
STATION interface type.
This does not fix any particular bug and just "looked right", so there's
a small chance it might be a regression.
Signed-off-by: Jonas Dreßler <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/marvell/mwifiex/cfg80211.c | 22 ++++---------------
1 file changed, 4 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index a6b9dc6700b14..7a4e3c693d38b 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1229,29 +1229,15 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
+ if (mwifiex_cfg80211_deinit_p2p(priv))
+ return -EFAULT;
+
switch (type) {
- case NL80211_IFTYPE_STATION:
- if (mwifiex_cfg80211_deinit_p2p(priv))
- return -EFAULT;
- priv->adapter->curr_iface_comb.p2p_intf--;
- priv->adapter->curr_iface_comb.sta_intf++;
- dev->ieee80211_ptr->iftype = type;
- if (mwifiex_deinit_priv_params(priv))
- return -1;
- if (mwifiex_init_new_priv_params(priv, dev, type))
- return -1;
- if (mwifiex_sta_init_cmd(priv, false, false))
- return -1;
- break;
case NL80211_IFTYPE_ADHOC:
- if (mwifiex_cfg80211_deinit_p2p(priv))
- return -EFAULT;
+ case NL80211_IFTYPE_STATION:
return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype,
type, params);
- break;
case NL80211_IFTYPE_AP:
- if (mwifiex_cfg80211_deinit_p2p(priv))
- return -EFAULT;
return mwifiex_change_vif_to_ap(dev, curr_iftype, type,
params);
case NL80211_IFTYPE_UNSPECIFIED:
--
2.33.0
From: Matthias Schiffer <[email protected]>
[ Upstream commit 67ca5159dbe2edb5dae7544447b8677d2596933a ]
It seems reasonable to fine-tune only some of the skew values when using
one of the rgmii-*id PHY modes, and even when all skew values are
specified, using the correct ID PHY mode makes sense for documentation
purposes. Such a configuration also appears in the binding docs in
Documentation/devicetree/bindings/net/micrel-ksz90x1.txt, so the driver
should not warn about it.
Signed-off-by: Matthias Schiffer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/micrel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 69b20a466c61c..b341a8be09f92 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -732,9 +732,9 @@ static int ksz9031_config_init(struct phy_device *phydev)
MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
tx_data_skews, 4, &update);
- if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII)
+ if (update && !phy_interface_is_rgmii(phydev))
phydev_warn(phydev,
- "*-skew-ps values should be used only with phy-mode = \"rgmii\"\n");
+ "*-skew-ps values should be used only with RGMII PHY modes\n");
/* Silicon Errata Sheet (DS80000691D or DS80000692D):
* When the device links in the 1000BASE-T slave mode only,
--
2.33.0
From: Kalesh Singh <[email protected]>
[ Upstream commit 7ce1bb83a14019f8c396d57ec704d19478747716 ]
If CONFIG_CFI_CLANG=y, attempting to read an event histogram will cause
the kernel to panic due to failed CFI check.
1. echo 'hist:keys=common_pid' >> events/sched/sched_switch/trigger
2. cat events/sched/sched_switch/hist
3. kernel panics on attempting to read hist
This happens because the sort() function expects a generic
int (*)(const void *, const void *) pointer for the compare function.
To prevent this CFI failure, change tracing map cmp_entries_* function
signatures to match this.
Also, fix the build error reported by the kernel test robot [1].
[1] https://lore.kernel.org/r/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kalesh Singh <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/tracing_map.c | 40 ++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 17 deletions(-)
diff --git a/kernel/trace/tracing_map.c b/kernel/trace/tracing_map.c
index 4b50fc0cb12c7..d63e51dde0d24 100644
--- a/kernel/trace/tracing_map.c
+++ b/kernel/trace/tracing_map.c
@@ -834,29 +834,35 @@ int tracing_map_init(struct tracing_map *map)
return err;
}
-static int cmp_entries_dup(const struct tracing_map_sort_entry **a,
- const struct tracing_map_sort_entry **b)
+static int cmp_entries_dup(const void *A, const void *B)
{
+ const struct tracing_map_sort_entry *a, *b;
int ret = 0;
- if (memcmp((*a)->key, (*b)->key, (*a)->elt->map->key_size))
+ a = *(const struct tracing_map_sort_entry **)A;
+ b = *(const struct tracing_map_sort_entry **)B;
+
+ if (memcmp(a->key, b->key, a->elt->map->key_size))
ret = 1;
return ret;
}
-static int cmp_entries_sum(const struct tracing_map_sort_entry **a,
- const struct tracing_map_sort_entry **b)
+static int cmp_entries_sum(const void *A, const void *B)
{
const struct tracing_map_elt *elt_a, *elt_b;
+ const struct tracing_map_sort_entry *a, *b;
struct tracing_map_sort_key *sort_key;
struct tracing_map_field *field;
tracing_map_cmp_fn_t cmp_fn;
void *val_a, *val_b;
int ret = 0;
- elt_a = (*a)->elt;
- elt_b = (*b)->elt;
+ a = *(const struct tracing_map_sort_entry **)A;
+ b = *(const struct tracing_map_sort_entry **)B;
+
+ elt_a = a->elt;
+ elt_b = b->elt;
sort_key = &elt_a->map->sort_key;
@@ -873,18 +879,21 @@ static int cmp_entries_sum(const struct tracing_map_sort_entry **a,
return ret;
}
-static int cmp_entries_key(const struct tracing_map_sort_entry **a,
- const struct tracing_map_sort_entry **b)
+static int cmp_entries_key(const void *A, const void *B)
{
const struct tracing_map_elt *elt_a, *elt_b;
+ const struct tracing_map_sort_entry *a, *b;
struct tracing_map_sort_key *sort_key;
struct tracing_map_field *field;
tracing_map_cmp_fn_t cmp_fn;
void *val_a, *val_b;
int ret = 0;
- elt_a = (*a)->elt;
- elt_b = (*b)->elt;
+ a = *(const struct tracing_map_sort_entry **)A;
+ b = *(const struct tracing_map_sort_entry **)B;
+
+ elt_a = a->elt;
+ elt_b = b->elt;
sort_key = &elt_a->map->sort_key;
@@ -989,10 +998,8 @@ static void sort_secondary(struct tracing_map *map,
struct tracing_map_sort_key *primary_key,
struct tracing_map_sort_key *secondary_key)
{
- int (*primary_fn)(const struct tracing_map_sort_entry **,
- const struct tracing_map_sort_entry **);
- int (*secondary_fn)(const struct tracing_map_sort_entry **,
- const struct tracing_map_sort_entry **);
+ int (*primary_fn)(const void *, const void *);
+ int (*secondary_fn)(const void *, const void *);
unsigned i, start = 0, n_sub = 1;
if (is_key(map, primary_key->field_idx))
@@ -1061,8 +1068,7 @@ int tracing_map_sort_entries(struct tracing_map *map,
unsigned int n_sort_keys,
struct tracing_map_sort_entry ***sort_entries)
{
- int (*cmp_entries_fn)(const struct tracing_map_sort_entry **,
- const struct tracing_map_sort_entry **);
+ int (*cmp_entries_fn)(const void *, const void *);
struct tracing_map_sort_entry *sort_entry, **entries;
int i, n_entries, ret;
--
2.33.0
From: Wen Gong <[email protected]>
[ Upstream commit 441b3b5911f8ead7f2fe2336587b340a33044d58 ]
When wlan interface is up, 11d scan is sent to the firmware, and the
firmware needs to spend couple of seconds to complete the 11d scan. If
immediately a normal scan from user space arrives to ath11k, then the
normal scan request is also sent to the firmware, but the scan started
event will be reported to ath11k until the 11d scan complete. When timed
out for the scan started in ath11k, ath11k stops the normal scan and the
firmware reports WMI_SCAN_EVENT_DEQUEUED to ath11k for the normal scan.
ath11k has no handler for the event and then timed out for the scan
completed in ath11k_scan_stop(), and ath11k prints the following error
message.
[ 1491.604750] ath11k_pci 0000:02:00.0: failed to receive scan abort comple: timed out
[ 1491.604756] ath11k_pci 0000:02:00.0: failed to stop scan: -110
[ 1491.604758] ath11k_pci 0000:02:00.0: failed to start hw scan: -110
Add a handler for WMI_SCAN_EVENT_DEQUEUED and then complete the scan to
get rid of the above error message.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 2f777d61f9065..cf0f778b0cbc9 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5856,6 +5856,8 @@ static void ath11k_scan_event(struct ath11k_base *ab, struct sk_buff *skb)
ath11k_wmi_event_scan_start_failed(ar);
break;
case WMI_SCAN_EVENT_DEQUEUED:
+ __ath11k_mac_scan_finish(ar);
+ break;
case WMI_SCAN_EVENT_PREEMPTED:
case WMI_SCAN_EVENT_RESTARTED:
case WMI_SCAN_EVENT_FOREIGN_CHAN_EXIT:
--
2.33.0
From: Israel Rukshin <[email protected]>
[ Upstream commit e3e19dcc4c416d65f99f13d55be2b787f8d0050e ]
When a port is removed through configfs, any connected controllers
are starting teardown flow asynchronously and can still send commands.
This causes a use-after-free bug for any command that dereferences
req->port (like in nvmet_parse_io_cmd).
To fix this, wait for all the teardown scheduled works to complete
(like release_work at rdma/tcp drivers). This ensures there are no
active controllers when the port is eventually removed.
Signed-off-by: Israel Rukshin <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/configfs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 37e1d7784e175..9aed5cc710960 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -1462,6 +1462,8 @@ static void nvmet_port_release(struct config_item *item)
{
struct nvmet_port *port = to_nvmet_port(item);
+ /* Let inflight controllers teardown complete */
+ flush_scheduled_work();
list_del(&port->global_entry);
kfree(port->ana_state);
--
2.33.0
From: Israel Rukshin <[email protected]>
[ Upstream commit fcf73a804c7d6bbf0ea63531c6122aa363852e04 ]
When removing a port, all its controllers are being removed, but there
are queues on the port that doesn't belong to any controller (during
connection time). This causes a use-after-free bug for any command
that dereferences req->port (like in nvmet_alloc_ctrl). Those queues
should be destroyed before freeing the port via configfs. Destroy the
remaining queues after the RDMA-CM was destroyed guarantees that no
new queue will be created.
Signed-off-by: Israel Rukshin <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/rdma.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index 7d607f435e366..6d5552f2f184a 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -1819,12 +1819,36 @@ restart:
mutex_unlock(&nvmet_rdma_queue_mutex);
}
+static void nvmet_rdma_destroy_port_queues(struct nvmet_rdma_port *port)
+{
+ struct nvmet_rdma_queue *queue, *tmp;
+ struct nvmet_port *nport = port->nport;
+
+ mutex_lock(&nvmet_rdma_queue_mutex);
+ list_for_each_entry_safe(queue, tmp, &nvmet_rdma_queue_list,
+ queue_list) {
+ if (queue->port != nport)
+ continue;
+
+ list_del_init(&queue->queue_list);
+ __nvmet_rdma_queue_disconnect(queue);
+ }
+ mutex_unlock(&nvmet_rdma_queue_mutex);
+}
+
static void nvmet_rdma_disable_port(struct nvmet_rdma_port *port)
{
struct rdma_cm_id *cm_id = xchg(&port->cm_id, NULL);
if (cm_id)
rdma_destroy_id(cm_id);
+
+ /*
+ * Destroy the remaining queues, which are not belong to any
+ * controller yet. Do it here after the RDMA-CM was destroyed
+ * guarantees that no new queue will be created.
+ */
+ nvmet_rdma_destroy_port_queues(port);
}
static int nvmet_rdma_enable_port(struct nvmet_rdma_port *port)
--
2.33.0
From: Michael Tretter <[email protected]>
[ Upstream commit 1ecda6393db4be44aba27a243e648dc98c9b92e3 ]
The mailbox is initialized after the interrupt handler is installed. As
the firmware is loaded and started even later, it should not happen that
the interrupt occurs without the mailbox being initialized.
As the Linux Driver Verification project (linuxtesting.org) keeps
reporting this as an error, add a check to ignore interrupts before the
mailbox is initialized to fix this potential null pointer dereference.
Reported-by: Yuri Savinykh <[email protected]>
Reported-by: Nadezda Lutovinova <[email protected]>
Signed-off-by: Michael Tretter <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/allegro-dvt/allegro-core.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/staging/media/allegro-dvt/allegro-core.c b/drivers/staging/media/allegro-dvt/allegro-core.c
index 640451134072b..28b6ba895ccd5 100644
--- a/drivers/staging/media/allegro-dvt/allegro-core.c
+++ b/drivers/staging/media/allegro-dvt/allegro-core.c
@@ -1802,6 +1802,15 @@ static irqreturn_t allegro_irq_thread(int irq, void *data)
{
struct allegro_dev *dev = data;
+ /*
+ * The firmware is initialized after the mailbox is setup. We further
+ * check the AL5_ITC_CPU_IRQ_STA register, if the firmware actually
+ * triggered the interrupt. Although this should not happen, make sure
+ * that we ignore interrupts, if the mailbox is not initialized.
+ */
+ if (!dev->mbox_status)
+ return IRQ_NONE;
+
allegro_mbox_notify(dev->mbox_status);
return IRQ_HANDLED;
--
2.33.0
From: Ryder Lee <[email protected]>
[ Upstream commit d45dac0732a287fc371a23f257cce04e65627947 ]
The bounds check on datalen is off-by-one, so fix it.
Signed-off-by: Ryder Lee <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index ea71409751519..7c2d09a64882e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -830,7 +830,7 @@ static void mt7915_check_he_obss_narrow_bw_ru_iter(struct wiphy *wiphy,
elem = ieee80211_bss_get_elem(bss, WLAN_EID_EXT_CAPABILITY);
- if (!elem || elem->datalen < 10 ||
+ if (!elem || elem->datalen <= 10 ||
!(elem->data[10] &
WLAN_EXT_CAPA10_OBSS_NARROW_BW_RU_TOLERANCE_SUPPORT))
data->tolerated = false;
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit 257051a235c17e33782b6e24a4b17f2d7915aaec ]
When the driver fails to request the firmware, it calls its error
handler. In the error handler, the driver detaches device from driver
first before releasing the firmware, which can cause a use-after-free bug.
Fix this by releasing firmware first.
The following log reveals it:
[ 9.007301 ] BUG: KASAN: use-after-free in mwl8k_fw_state_machine+0x320/0xba0
[ 9.010143 ] Workqueue: events request_firmware_work_func
[ 9.010830 ] Call Trace:
[ 9.010830 ] dump_stack_lvl+0xa8/0xd1
[ 9.010830 ] print_address_description+0x87/0x3b0
[ 9.010830 ] kasan_report+0x172/0x1c0
[ 9.010830 ] ? mutex_unlock+0xd/0x10
[ 9.010830 ] ? mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] ? mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] __asan_report_load8_noabort+0x14/0x20
[ 9.010830 ] mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] ? mwl8k_load_firmware+0x5f0/0x5f0
[ 9.010830 ] request_firmware_work_func+0x172/0x250
[ 9.010830 ] ? read_lock_is_recursive+0x20/0x20
[ 9.010830 ] ? process_one_work+0x7a1/0x1100
[ 9.010830 ] ? request_firmware_nowait+0x460/0x460
[ 9.010830 ] ? __this_cpu_preempt_check+0x13/0x20
[ 9.010830 ] process_one_work+0x9bb/0x1100
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwl8k.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwl8k.c b/drivers/net/wireless/marvell/mwl8k.c
index 27b7d4b779e0b..dc91ac8cbd48b 100644
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -5796,8 +5796,8 @@ static void mwl8k_fw_state_machine(const struct firmware *fw, void *context)
fail:
priv->fw_state = FW_STATE_ERROR;
complete(&priv->firmware_loading_complete);
- device_release_driver(&priv->pdev->dev);
mwl8k_release_firmware(priv);
+ device_release_driver(&priv->pdev->dev);
}
#define MAX_RESTART_ATTEMPTS 1
--
2.33.0
From: Kees Cook <[email protected]>
[ Upstream commit cf2a85efdade117e2169d6e26641016cbbf03ef0 ]
For files that lack trailing newlines and match a leaking address (e.g.
wchan[1]), the leaking_addresses.pl report would run together with the
next line, making things look corrupted.
Unconditionally remove the newline on input, and write it back out on
output.
[1] https://lore.kernel.org/all/20210103142726.GC30643@xsang-OptiPlex-9020/
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/leaking_addresses.pl | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/scripts/leaking_addresses.pl b/scripts/leaking_addresses.pl
index b2d8b8aa2d99e..8f636a23bc3f2 100755
--- a/scripts/leaking_addresses.pl
+++ b/scripts/leaking_addresses.pl
@@ -455,8 +455,9 @@ sub parse_file
open my $fh, "<", $file or return;
while ( <$fh> ) {
+ chomp;
if (may_leak_address($_)) {
- print $file . ': ' . $_;
+ printf("$file: $_\n");
}
}
close $fh;
--
2.33.0
From: Shuah Khan <[email protected]>
[ Upstream commit c3867ab5924b7a9a0b4a117902a08669d8be7c21 ]
get_warnings_count() does fclose() using File * returned from popen().
Fix it to call pclose() as it should.
tools/testing/selftests/kvm/x86_64/mmio_warning_test
x86_64/mmio_warning_test.c: In function ‘get_warnings_count’:
x86_64/mmio_warning_test.c:87:9: warning: ‘fclose’ called on pointer returned from a mismatched allocation function [-Wmismatched-dealloc]
87 | fclose(f);
| ^~~~~~~~~
x86_64/mmio_warning_test.c:84:13: note: returned from ‘popen’
84 | f = popen("dmesg | grep \"WARNING:\" | wc -l", "r");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <[email protected]>
Acked-by: Paolo Bonzini <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kvm/x86_64/mmio_warning_test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c
index 8039e1eff9388..9f55ccd169a13 100644
--- a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c
+++ b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c
@@ -84,7 +84,7 @@ int get_warnings_count(void)
f = popen("dmesg | grep \"WARNING:\" | wc -l", "r");
if (fscanf(f, "%d", &warnings) < 1)
warnings = 0;
- fclose(f);
+ pclose(f);
return warnings;
}
--
2.33.0
From: Corey Minyard <[email protected]>
[ Upstream commit b36eb5e7b75a756baa64909a176dd4269ee05a8b ]
Don't do kfree or other risky things when oops_in_progress is set.
It's easy enough to avoid doing them
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/ipmi/ipmi_msghandler.c | 10 +++++++---
drivers/char/ipmi/ipmi_watchdog.c | 17 ++++++++++++-----
2 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 8774a3b8ff959..abb865b1dff29 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -4802,7 +4802,9 @@ static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0);
static void free_smi_msg(struct ipmi_smi_msg *msg)
{
atomic_dec(&smi_msg_inuse_count);
- kfree(msg);
+ /* Try to keep as much stuff out of the panic path as possible. */
+ if (!oops_in_progress)
+ kfree(msg);
}
struct ipmi_smi_msg *ipmi_alloc_smi_msg(void)
@@ -4821,7 +4823,9 @@ EXPORT_SYMBOL(ipmi_alloc_smi_msg);
static void free_recv_msg(struct ipmi_recv_msg *msg)
{
atomic_dec(&recv_msg_inuse_count);
- kfree(msg);
+ /* Try to keep as much stuff out of the panic path as possible. */
+ if (!oops_in_progress)
+ kfree(msg);
}
static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void)
@@ -4839,7 +4843,7 @@ static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void)
void ipmi_free_recv_msg(struct ipmi_recv_msg *msg)
{
- if (msg->user)
+ if (msg->user && !oops_in_progress)
kref_put(&msg->user->refcount, free_user);
msg->done(msg);
}
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 6384510c48d6b..92eda5b2f1341 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -342,13 +342,17 @@ static atomic_t msg_tofree = ATOMIC_INIT(0);
static DECLARE_COMPLETION(msg_wait);
static void msg_free_smi(struct ipmi_smi_msg *msg)
{
- if (atomic_dec_and_test(&msg_tofree))
- complete(&msg_wait);
+ if (atomic_dec_and_test(&msg_tofree)) {
+ if (!oops_in_progress)
+ complete(&msg_wait);
+ }
}
static void msg_free_recv(struct ipmi_recv_msg *msg)
{
- if (atomic_dec_and_test(&msg_tofree))
- complete(&msg_wait);
+ if (atomic_dec_and_test(&msg_tofree)) {
+ if (!oops_in_progress)
+ complete(&msg_wait);
+ }
}
static struct ipmi_smi_msg smi_msg = {
.done = msg_free_smi
@@ -434,8 +438,10 @@ static int _ipmi_set_timeout(int do_heartbeat)
rv = __ipmi_set_timeout(&smi_msg,
&recv_msg,
&send_heartbeat_now);
- if (rv)
+ if (rv) {
+ atomic_set(&msg_tofree, 0);
return rv;
+ }
wait_for_completion(&msg_wait);
@@ -580,6 +586,7 @@ restart:
&recv_msg,
1);
if (rv) {
+ atomic_set(&msg_tofree, 0);
pr_warn("heartbeat send failure: %d\n", rv);
return rv;
}
--
2.33.0
From: Stefan Schaeckeler <[email protected]>
[ Upstream commit 3d730ee686800d71ecc5c3cb8460dcdcdeaf38a3 ]
Let GK45 not go into BIOS for determining the AC power state.
The BIOS wrongly returns 0, so hardcode the power state to 1.
The mini PC GK45 by Besstar Tech Lld. (aka Kodlix) just runs
off AC. It does not include any batteries. Nevertheless BIOS
reports AC off:
root@kodlix:/usr/src/linux# cat /sys/class/power_supply/ADP1/online
0
root@kodlix:/usr/src/linux# modprobe acpi_dbg
root@kodlix:/usr/src/linux# tools/power/acpi/acpidbg
- find _PSR
\_SB.PCI0.SBRG.H_EC.ADP1._PSR Method 000000009283cee8 001 Args 0 Len 001C Aml 00000000f54e5f67
- execute \_SB.PCI0.SBRG.H_EC.ADP1._PSR
Evaluating \_SB.PCI0.SBRG.H_EC.ADP1._PSR
Evaluation of \_SB.PCI0.SBRG.H_EC.ADP1._PSR returned object 00000000dc08c187, external buffer length 18
[Integer] = 0000000000000000
that should be
[Integer] = 0000000000000001
Signed-off-by: Stefan Schaeckeler <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/ac.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 46a64e9fa7165..23ca1a1c67b75 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -64,6 +64,7 @@ static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume);
static int ac_sleep_before_get_state_ms;
static int ac_check_pmic = 1;
+static int ac_only;
static struct acpi_driver acpi_ac_driver = {
.name = "ac",
@@ -99,6 +100,11 @@ static int acpi_ac_get_state(struct acpi_ac *ac)
if (!ac)
return -EINVAL;
+ if (ac_only) {
+ ac->state = 1;
+ return 0;
+ }
+
status = acpi_evaluate_integer(ac->device->handle, "_PSR", NULL,
&ac->state);
if (ACPI_FAILURE(status)) {
@@ -212,6 +218,12 @@ static int __init ac_do_not_check_pmic_quirk(const struct dmi_system_id *d)
return 0;
}
+static int __init ac_only_quirk(const struct dmi_system_id *d)
+{
+ ac_only = 1;
+ return 0;
+}
+
/* Please keep this list alphabetically sorted */
static const struct dmi_system_id ac_dmi_table[] __initconst = {
{
@@ -221,6 +233,13 @@ static const struct dmi_system_id ac_dmi_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"),
},
},
+ {
+ /* Kodlix GK45 returning incorrect state */
+ .callback = ac_only_quirk,
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "GK45"),
+ },
+ },
{
/* Lenovo Ideapad Miix 320, AXP288 PMIC, separate fuel-gauge */
.callback = ac_do_not_check_pmic_quirk,
--
2.33.0
From: Josef Bacik <[email protected]>
[ Upstream commit 8ef9dc0f14ba6124c62547a4fdc59b163d8b864e ]
We got the following lockdep splat while running fstests (specifically
btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered
by 87579e9b7d8d ("loop: use worker per cgroup instead of kworker") which
converted loop to using workqueues, which comes with lockdep
annotations that don't exist with kworkers. The lockdep splat is as
follows:
WARNING: possible circular locking dependency detected
5.14.0-rc2-custom+ #34 Not tainted
------------------------------------------------------
losetup/156417 is trying to acquire lock:
ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600
but task is already holding lock:
ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #5 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x28/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x163/0x3a0
path_openat+0x74d/0xa40
do_filp_open+0x9c/0x140
do_sys_openat2+0xb1/0x170
__x64_sys_openat+0x54/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #4 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
blkdev_get_by_dev.part.0+0xd1/0x3c0
blkdev_get_by_path+0xc0/0xd0
btrfs_scan_one_device+0x52/0x1f0 [btrfs]
btrfs_control_ioctl+0xac/0x170 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (uuid_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
btrfs_rm_device+0x48/0x6a0 [btrfs]
btrfs_ioctl+0x2d1c/0x3110 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#11){.+.+}-{0:0}:
lo_write_bvec+0x112/0x290 [loop]
loop_process_work+0x25f/0xcb0 [loop]
process_one_work+0x28f/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x266/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x1130/0x1dc0
lock_acquire+0xf5/0x320
flush_workqueue+0xae/0x600
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x650 [loop]
lo_ioctl+0x29d/0x780 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/156417:
#0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]
stack backtrace:
CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0x10a/0x120
__lock_acquire+0x1130/0x1dc0
lock_acquire+0xf5/0x320
? flush_workqueue+0x84/0x600
flush_workqueue+0xae/0x600
? flush_workqueue+0x84/0x600
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x650 [loop]
lo_ioctl+0x29d/0x780 [loop]
? __lock_acquire+0x3a0/0x1dc0
? update_dl_rq_load_avg+0x152/0x360
? lock_is_held_type+0xa5/0x120
? find_held_lock.constprop.0+0x2b/0x80
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f645884de6b
Usually the uuid_mutex exists to protect the fs_devices that map
together all of the devices that match a specific uuid. In rm_device
we're messing with the uuid of a device, so it makes sense to protect
that here.
However in doing that it pulls in a whole host of lockdep dependencies,
as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus
we end up with the dependency chain under the uuid_mutex being added
under the normal sb write dependency chain, which causes problems with
loop devices.
We don't need the uuid mutex here however. If we call
btrfs_scan_one_device() before we scratch the super block we will find
the fs_devices and not find the device itself and return EBUSY because
the fs_devices is open. If we call it after the scratch happens it will
not appear to be a valid btrfs file system.
We do not need to worry about other fs_devices modifying operations here
because we're protected by the exclusive operations locking.
So drop the uuid_mutex here in order to fix the lockdep splat.
A more detailed explanation from the discussion:
We are worried about rm and scan racing with each other, before this
change we'll zero the device out under the UUID mutex so when scan does
run it'll make sure that it can go through the whole device scan thing
without rm messing with us.
We aren't worried if the scratch happens first, because the result is we
don't think this is a btrfs device and we bail out.
The only case we are concerned with is we scratch _after_ scan is able
to read the superblock and gets a seemingly valid super block, so lets
consider this case.
Scan will call device_list_add() with the device we're removing. We'll
call find_fsid_with_metadata_uuid() and get our fs_devices for this
UUID. At this point we lock the fs_devices->device_list_mutex. This is
what protects us in this case, but we have two cases here.
1. We aren't to the device removal part of the RM. We found our device,
and device name matches our path, we go down and we set total_devices
to our super number of devices, which doesn't affect anything because
we haven't done the remove yet.
2. We are past the device removal part, which is protected by the
device_list_mutex. Scan doesn't find the device, it goes down and
does the
if (fs_devices->opened)
return -EBUSY;
check and we bail out.
Nothing about this situation is ideal, but the lockdep splat is real,
and the fix is safe, tho admittedly a bit scary looking.
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
[ copy more from the discussion ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/volumes.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 8946355dfe448..d9e582e40b5b7 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -2069,8 +2069,11 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
u64 num_devices;
int ret = 0;
- mutex_lock(&uuid_mutex);
-
+ /*
+ * The device list in fs_devices is accessed without locks (neither
+ * uuid_mutex nor device_list_mutex) as it won't change on a mounted
+ * filesystem and another device rm cannot run.
+ */
num_devices = btrfs_num_devices(fs_info);
ret = btrfs_check_raid_min_devices(fs_info, num_devices - 1);
@@ -2114,11 +2117,9 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
mutex_unlock(&fs_info->chunk_mutex);
}
- mutex_unlock(&uuid_mutex);
ret = btrfs_shrink_device(device, 0);
if (!ret)
btrfs_reada_remove_dev(device);
- mutex_lock(&uuid_mutex);
if (ret)
goto error_undo;
@@ -2194,7 +2195,6 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
}
out:
- mutex_unlock(&uuid_mutex);
return ret;
error_undo:
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit d18785e213866935b4c3dc0c33c3e18801ce0ce8 ]
neigh_output() reads n->nud_state and hh->hh_len locklessly.
This is fine, but we need to add annotations and document this.
We evaluate skip_cache first to avoid reading these fields
if the cache has to by bypassed.
syzbot report:
BUG: KCSAN: data-race in __neigh_event_send / ip_finish_output2
write to 0xffff88810798a885 of 1 bytes by interrupt on cpu 1:
__neigh_event_send+0x40d/0xac0 net/core/neighbour.c:1128
neigh_event_send include/net/neighbour.h:444 [inline]
neigh_resolve_output+0x104/0x410 net/core/neighbour.c:1476
neigh_output include/net/neighbour.h:510 [inline]
ip_finish_output2+0x80a/0xaa0 net/ipv4/ip_output.c:221
ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
dst_output include/net/dst.h:450 [inline]
ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
__ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
__tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
expire_timers+0x135/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x430 kernel/time/timer.c:1734
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
call_cpuidle kernel/sched/idle.c:158 [inline]
cpuidle_idle_call kernel/sched/idle.c:239 [inline]
do_idle+0x1a3/0x250 kernel/sched/idle.c:306
cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
secondary_startup_64_no_verify+0xb1/0xbb
read to 0xffff88810798a885 of 1 bytes by interrupt on cpu 0:
neigh_output include/net/neighbour.h:507 [inline]
ip_finish_output2+0x79a/0xaa0 net/ipv4/ip_output.c:221
ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
dst_output include/net/dst.h:450 [inline]
ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
__ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
__tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
expire_timers+0x135/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x430 kernel/time/timer.c:1734
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
call_cpuidle kernel/sched/idle.c:158 [inline]
cpuidle_idle_call kernel/sched/idle.c:239 [inline]
do_idle+0x1a3/0x250 kernel/sched/idle.c:306
cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
rest_init+0xee/0x100 init/main.c:734
arch_call_rest_init+0xa/0xb
start_kernel+0x5e4/0x669 init/main.c:1142
secondary_startup_64_no_verify+0xb1/0xbb
value changed: 0x20 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/neighbour.h | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index 22ced1381ede5..990f9b1d17092 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -504,10 +504,15 @@ static inline int neigh_output(struct neighbour *n, struct sk_buff *skb,
{
const struct hh_cache *hh = &n->hh;
- if ((n->nud_state & NUD_CONNECTED) && hh->hh_len && !skip_cache)
+ /* n->nud_state and hh->hh_len could be changed under us.
+ * neigh_hh_output() is taking care of the race later.
+ */
+ if (!skip_cache &&
+ (READ_ONCE(n->nud_state) & NUD_CONNECTED) &&
+ READ_ONCE(hh->hh_len))
return neigh_hh_output(hh, skb);
- else
- return n->output(n, skb);
+
+ return n->output(n, skb);
}
static inline struct neighbour *
--
2.33.0
From: Tim Gardner <[email protected]>
[ Upstream commit b220c154832c5cd0df34cbcbcc19d7135c16e823 ]
Coverity complains of a possible NULL dereference:
CID 120718 (#1 of 1): Dereference null return value (NULL_RETURNS)
23. dereference: Dereferencing a pointer that might be NULL state->bos when
calling msm_gpu_crashstate_get_bo. [show details]
301 msm_gpu_crashstate_get_bo(state, submit->bos[i].obj,
302 submit->bos[i].iova, submit->bos[i].flags);
Fix this by employing the same state->bos NULL check as is used in the next
for loop.
Cc: Rob Clark <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Tim Gardner <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_gpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
index 55d16489d0f3f..90c26da109026 100644
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -376,7 +376,7 @@ static void msm_gpu_crashstate_capture(struct msm_gpu *gpu,
state->bos = kcalloc(nr,
sizeof(struct msm_gpu_state_bo), GFP_KERNEL);
- for (i = 0; i < submit->nr_bos; i++) {
+ for (i = 0; state->bos && i < submit->nr_bos; i++) {
if (should_dump(submit, i)) {
msm_gpu_crashstate_get_bo(state, submit->bos[i].obj,
submit->bos[i].iova, submit->bos[i].flags);
--
2.33.0
From: Israel Rukshin <[email protected]>
[ Upstream commit 2351ead99ce9164fb42555aee3f96af84c4839e9 ]
When removing a port, all its controllers are being removed, but there
are queues on the port that doesn't belong to any controller (during
connection time). This causes a use-after-free bug for any command
that dereferences req->port (like in nvmet_alloc_ctrl). Those queues
should be destroyed before freeing the port via configfs. Destroy
the remaining queues after the accept_work was cancelled guarantees
that no new queue will be created.
Signed-off-by: Israel Rukshin <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/tcp.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 58dc517fe8678..1251fd6e92780 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1708,6 +1708,17 @@ err_port:
return ret;
}
+static void nvmet_tcp_destroy_port_queues(struct nvmet_tcp_port *port)
+{
+ struct nvmet_tcp_queue *queue;
+
+ mutex_lock(&nvmet_tcp_queue_mutex);
+ list_for_each_entry(queue, &nvmet_tcp_queue_list, queue_list)
+ if (queue->port == port)
+ kernel_sock_shutdown(queue->sock, SHUT_RDWR);
+ mutex_unlock(&nvmet_tcp_queue_mutex);
+}
+
static void nvmet_tcp_remove_port(struct nvmet_port *nport)
{
struct nvmet_tcp_port *port = nport->priv;
@@ -1717,6 +1728,11 @@ static void nvmet_tcp_remove_port(struct nvmet_port *nport)
port->sock->sk->sk_user_data = NULL;
write_unlock_bh(&port->sock->sk->sk_callback_lock);
cancel_work_sync(&port->accept_work);
+ /*
+ * Destroy the remaining queues, which are not belong to any
+ * controller yet.
+ */
+ nvmet_tcp_destroy_port_queues(port);
sock_release(port->sock);
kfree(port);
--
2.33.0
From: Jens Axboe <[email protected]>
[ Upstream commit 037057a5a979c7eeb2ee5d12cf4c24b805192c75 ]
This check is meant to catch cases where a requeue is attempted on a
request that is still inserted. It's never really been useful to catch any
misuse, and now it's actively wrong. Outside of that, this should not be a
BUG_ON() to begin with.
Remove the check as it's now causing active harm, as requeue off the plug
path will trigger it even though the request state is just fine.
Reported-by: Yi Zhang <[email protected]>
Link: https://lore.kernel.org/linux-block/CAHj4cs80zAUc2grnCZ015-2Rvd-=gXRfB_dFKy=RTm+wRo09HQ@mail.gmail.com/
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index e4422a09b1265..15a11a217cd03 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -774,7 +774,6 @@ void blk_mq_requeue_request(struct request *rq, bool kick_requeue_list)
/* this request will be re-inserted to io scheduler queue */
blk_mq_sched_requeue_request(rq);
- BUG_ON(!list_empty(&rq->queuelist));
blk_mq_add_to_requeue_list(rq, true, kick_requeue_list);
}
EXPORT_SYMBOL(blk_mq_requeue_request);
--
2.33.0
From: Florian Westphal <[email protected]>
[ Upstream commit 8c9c296adfae9ea05f655d69e9f6e13daa86fb4a ]
The VRF driver invokes netfilter for output+postrouting hooks so that users
can create rules that check for 'oif $vrf' rather than lower device name.
This is a problem when NAT rules are configured.
To avoid any conntrack involvement in round 1, tag skbs as 'untracked'
to prevent conntrack from picking them up.
This gets cleared before the packet gets handed to the ip stack so
conntrack will be active on the second iteration.
One remaining issue is that a rule like
output ... oif $vrfname notrack
won't propagate to the second round because we can't tell
'notrack set via ruleset' and 'notrack set by vrf driver' apart.
However, this isn't a regression: the 'notrack' removal happens
instead of unconditional nf_reset_ct().
I'd also like to avoid leaking more vrf specific conditionals into the
netfilter infra.
For ingress, conntrack has already been done before the packet makes it
to the vrf driver, with this patch egress does connection tracking with
lower/physical device as well.
Signed-off-by: Florian Westphal <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/vrf.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 2746f77745e4d..71902706234cc 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -34,6 +34,7 @@
#include <net/l3mdev.h>
#include <net/fib_rules.h>
#include <net/netns/generic.h>
+#include <net/netfilter/nf_conntrack.h>
#define DRV_NAME "vrf"
#define DRV_VERSION "1.1"
@@ -423,12 +424,26 @@ static int vrf_local_xmit(struct sk_buff *skb, struct net_device *dev,
return NETDEV_TX_OK;
}
+static void vrf_nf_set_untracked(struct sk_buff *skb)
+{
+ if (skb_get_nfct(skb) == 0)
+ nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
+}
+
+static void vrf_nf_reset_ct(struct sk_buff *skb)
+{
+ if (skb_get_nfct(skb) == IP_CT_UNTRACKED)
+ nf_reset_ct(skb);
+}
+
#if IS_ENABLED(CONFIG_IPV6)
static int vrf_ip6_local_out(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
int err;
+ vrf_nf_reset_ct(skb);
+
err = nf_hook(NFPROTO_IPV6, NF_INET_LOCAL_OUT, net,
sk, skb, NULL, skb_dst(skb)->dev, dst_output);
@@ -508,6 +523,8 @@ static int vrf_ip_local_out(struct net *net, struct sock *sk,
{
int err;
+ vrf_nf_reset_ct(skb);
+
err = nf_hook(NFPROTO_IPV4, NF_INET_LOCAL_OUT, net, sk,
skb, NULL, skb_dst(skb)->dev, dst_output);
if (likely(err == 1))
@@ -627,8 +644,7 @@ static void vrf_finish_direct(struct sk_buff *skb)
skb_pull(skb, ETH_HLEN);
}
- /* reset skb device */
- nf_reset_ct(skb);
+ vrf_nf_reset_ct(skb);
}
#if IS_ENABLED(CONFIG_IPV6)
@@ -642,7 +658,7 @@ static int vrf_finish_output6(struct net *net, struct sock *sk,
struct neighbour *neigh;
int ret;
- nf_reset_ct(skb);
+ vrf_nf_reset_ct(skb);
skb->protocol = htons(ETH_P_IPV6);
skb->dev = dev;
@@ -753,6 +769,8 @@ static struct sk_buff *vrf_ip6_out_direct(struct net_device *vrf_dev,
skb->dev = vrf_dev;
+ vrf_nf_set_untracked(skb);
+
err = nf_hook(NFPROTO_IPV6, NF_INET_LOCAL_OUT, net, sk,
skb, NULL, vrf_dev, vrf_ip6_out_direct_finish);
@@ -860,7 +878,7 @@ static int vrf_finish_output(struct net *net, struct sock *sk, struct sk_buff *s
bool is_v6gw = false;
int ret = -EINVAL;
- nf_reset_ct(skb);
+ vrf_nf_reset_ct(skb);
/* Be paranoid, rather than too clever. */
if (unlikely(skb_headroom(skb) < hh_len && dev->header_ops)) {
@@ -988,6 +1006,8 @@ static struct sk_buff *vrf_ip_out_direct(struct net_device *vrf_dev,
skb->dev = vrf_dev;
+ vrf_nf_set_untracked(skb);
+
err = nf_hook(NFPROTO_IPV4, NF_INET_LOCAL_OUT, net, sk,
skb, NULL, vrf_dev, vrf_ip_out_direct_finish);
--
2.33.0
From: Sidong Yang <[email protected]>
[ Upstream commit 44bee215f72f13874c0e734a0712c2e3264c0108 ]
Fix a warning reported by smatch that ret could be returned without
initialized. The dedupe operations are supposed to to return 0 for a 0
length range but the caller does not pass olen == 0. To keep this
behaviour and also fix the warning initialize ret to 0.
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Sidong Yang <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/reflink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/reflink.c b/fs/btrfs/reflink.c
index 96ef9fed9a656..3a3102bc15a05 100644
--- a/fs/btrfs/reflink.c
+++ b/fs/btrfs/reflink.c
@@ -634,7 +634,7 @@ static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 len,
static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen,
struct inode *dst, u64 dst_loff)
{
- int ret;
+ int ret = 0;
u64 i, tail_len, chunk_count;
struct btrfs_root *root_dst = BTRFS_I(dst)->root;
--
2.33.0
From: Andreas Gruenbacher <[email protected]>
[ Upstream commit 7427f3bb49d81525b7dd1d0f7c5f6bbc752e6f0e ]
So far, glock_hash_walk took a reference on each glock it iterated over, and it
was the examiner's responsibility to drop those references. Dropping the final
reference to a glock can sleep and the examiners are called in a RCU critical
section with spin locks held, so examiners that didn't need the extra reference
had to drop it asynchronously via gfs2_glock_queue_put or similar. This wasn't
done correctly in thaw_glock which did call gfs2_glock_put, and not at all in
dump_glock_func.
Change glock_hash_walk to not take glock references at all. That way, the
examiners that don't need them won't have to bother with slow asynchronous
puts, and the examiners that do need references can take them themselves.
Reported-by: Alexander Aring <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/gfs2/glock.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 533adcd480310..dd052101e2266 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1885,10 +1885,10 @@ static void glock_hash_walk(glock_examiner examiner, const struct gfs2_sbd *sdp)
do {
rhashtable_walk_start(&iter);
- while ((gl = rhashtable_walk_next(&iter)) && !IS_ERR(gl))
- if (gl->gl_name.ln_sbd == sdp &&
- lockref_get_not_dead(&gl->gl_lockref))
+ while ((gl = rhashtable_walk_next(&iter)) && !IS_ERR(gl)) {
+ if (gl->gl_name.ln_sbd == sdp)
examiner(gl);
+ }
rhashtable_walk_stop(&iter);
} while (cond_resched(), gl == ERR_PTR(-EAGAIN));
@@ -1930,7 +1930,6 @@ static void flush_delete_work(struct gfs2_glock *gl)
&gl->gl_delete, 0);
}
}
- gfs2_glock_queue_work(gl, 0);
}
void gfs2_flush_delete_work(struct gfs2_sbd *sdp)
@@ -1947,10 +1946,10 @@ void gfs2_flush_delete_work(struct gfs2_sbd *sdp)
static void thaw_glock(struct gfs2_glock *gl)
{
- if (!test_and_clear_bit(GLF_FROZEN, &gl->gl_flags)) {
- gfs2_glock_put(gl);
+ if (!test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))
+ return;
+ if (!lockref_get_not_dead(&gl->gl_lockref))
return;
- }
set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
gfs2_glock_queue_work(gl, 0);
}
@@ -1966,9 +1965,12 @@ static void clear_glock(struct gfs2_glock *gl)
gfs2_glock_remove_from_lru(gl);
spin_lock(&gl->gl_lockref.lock);
- if (gl->gl_state != LM_ST_UNLOCKED)
- handle_callback(gl, LM_ST_UNLOCKED, 0, false);
- __gfs2_glock_queue_work(gl, 0);
+ if (!__lockref_is_dead(&gl->gl_lockref)) {
+ gl->gl_lockref.count++;
+ if (gl->gl_state != LM_ST_UNLOCKED)
+ handle_callback(gl, LM_ST_UNLOCKED, 0, false);
+ __gfs2_glock_queue_work(gl, 0);
+ }
spin_unlock(&gl->gl_lockref.lock);
}
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit 345dac33f58894a56d17b92a41be10e16585ceff ]
When configuring the kernel for big-endian, we set either BE-8 or BE-32
based on the CPU architecture level. Until linux-4.4, we did not have
any ARMv7-M platform allowing big-endian builds, but now i.MX/Vybrid
is in that category, adn we get a build error because of this:
arch/arm/kernel/module-plts.c: In function 'get_module_plt':
arch/arm/kernel/module-plts.c:60:46: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]
This comes down to picking the wrong default, ARMv7-M uses BE8
like ARMv7-A does. Changing the default gets the kernel to compile
and presumably works.
https://lore.kernel.org/all/[email protected]/
Tested-by: Vladimir Murzin <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mm/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 02692fbe2db5c..423a97dd2f57c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -753,7 +753,7 @@ config CPU_BIG_ENDIAN
config CPU_ENDIAN_BE8
bool
depends on CPU_BIG_ENDIAN
- default CPU_V6 || CPU_V6K || CPU_V7
+ default CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M
help
Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
--
2.33.0
From: Masami Hiramatsu <[email protected]>
[ Upstream commit b3ea5d56f212ad81328c82454829a736197ebccc ]
Currently the stacktrace on clang compiled arm kernel uses the 'lr'
register to find the first frame address from pt_regs. However, that
is wrong after calling another function, because the 'lr' register
is used by 'bl' instruction and never be recovered.
As same as gcc arm kernel, directly use the frame pointer (r11) of
the pt_regs to find the first frame address.
Note that this fixes kretprobe stacktrace issue only with
CONFIG_UNWINDER_FRAME_POINTER=y. For the CONFIG_UNWINDER_ARM,
we need another fix.
Signed-off-by: Masami Hiramatsu <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/stacktrace.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 76ea4178a55cb..db798eac74315 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -54,8 +54,7 @@ int notrace unwind_frame(struct stackframe *frame)
frame->sp = frame->fp;
frame->fp = *(unsigned long *)(fp);
- frame->pc = frame->lr;
- frame->lr = *(unsigned long *)(fp + 4);
+ frame->pc = *(unsigned long *)(fp + 4);
#else
/* check current frame pointer is within bounds */
if (fp < low + 12 || fp > high - 4)
--
2.33.0
From: Tetsuo Handa <[email protected]>
[ Upstream commit f91488ee15bd3cac467e2d6a361fc2d34d1052ae ]
syzbot is reporting kernel panic at smk_cipso_doi() due to memory
allocation fault injection [1]. The reason for need to use panic() was
not explained. But since no fix was proposed for 18 months, for now
let's use __GFP_NOFAIL for utilizing syzbot resource on other bugs.
Link: https://syzkaller.appspot.com/bug?extid=89731ccb6fec15ce1c22 [1]
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smackfs.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index e33f98d25fc02..ca0daba11f814 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -693,9 +693,7 @@ static void smk_cipso_doi(void)
printk(KERN_WARNING "%s:%d remove rc = %d\n",
__func__, __LINE__, rc);
- doip = kmalloc(sizeof(struct cipso_v4_doi), GFP_KERNEL);
- if (doip == NULL)
- panic("smack: Failed to initialize cipso DOI.\n");
+ doip = kmalloc(sizeof(struct cipso_v4_doi), GFP_KERNEL | __GFP_NOFAIL);
doip->map.std = NULL;
doip->doi = smk_cipso_doi_value;
doip->type = CIPSO_V4_MAP_PASS;
--
2.33.0
From: Andreas Gruenbacher <[email protected]>
[ Upstream commit 486408d690e130c3adacf816754b97558d715f46 ]
In gfs2_inode_lookup and gfs2_create_inode, we're calling
gfs2_cancel_delete_work which currently cancels any remote delete work
(delete_work_func) synchronously. This means that if the work is
currently running, it will wait for it to finish. We're doing this to
pevent a previous instance of an inode from having any influence on the
next instance.
However, delete_work_func uses gfs2_inode_lookup internally, and we can
end up in a deadlock when delete_work_func gets interrupted at the wrong
time. For example,
(1) An inode's iopen glock has delete work queued, but the inode
itself has been evicted from the inode cache.
(2) The delete work is preempted before reaching gfs2_inode_lookup.
(3) Another process recreates the inode (gfs2_create_inode). It tries
to cancel any outstanding delete work, which blocks waiting for
the ongoing delete work to finish.
(4) The delete work calls gfs2_inode_lookup, which blocks waiting for
gfs2_create_inode to instantiate and unlock the new inode =>
deadlock.
It turns out that when the delete work notices that its inode has been
re-instantiated, it will do nothing. This means that it's safe to
cancel the delete work asynchronously. This prevents the kind of
deadlock described above.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/gfs2/glock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 03c3407c8e26f..533adcd480310 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1911,7 +1911,7 @@ bool gfs2_queue_delete_work(struct gfs2_glock *gl, unsigned long delay)
void gfs2_cancel_delete_work(struct gfs2_glock *gl)
{
- if (cancel_delayed_work_sync(&gl->gl_delete)) {
+ if (cancel_delayed_work(&gl->gl_delete)) {
clear_bit(GLF_PENDING_DELETE, &gl->gl_flags);
gfs2_glock_put(gl);
}
--
2.33.0
From: Vladimir Oltean <[email protected]>
[ Upstream commit 49753a75b9a32de4c0393bb8d1e51ea223fda8e4 ]
Looking at the code, the GSWIP switch appears to hold bridging service
structures (VLANs, FDBs, forwarding rules) in PCE table entries.
Hardware access to the PCE table is non-atomic, and is comprised of
several register reads and writes.
These accesses are currently serialized by the rtnl_lock, but DSA is
changing its driver API and that lock will no longer be held when
calling ->port_fdb_add() and ->port_fdb_del().
So this driver needs to serialize the access to the PCE table using its
own locking scheme. This patch adds that.
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Hauke Mehrtens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/lantiq_gswip.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 4d23a7aba7961..f54e7f48b0dd7 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -274,6 +274,7 @@ struct gswip_priv {
int num_gphy_fw;
struct gswip_gphy_fw *gphy_fw;
u32 port_vlan_filter;
+ struct mutex pce_table_lock;
};
struct gswip_pce_table_entry {
@@ -521,10 +522,14 @@ static int gswip_pce_table_entry_read(struct gswip_priv *priv,
u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD :
GSWIP_PCE_TBL_CTRL_OPMOD_ADRD;
+ mutex_lock(&priv->pce_table_lock);
+
err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
GSWIP_PCE_TBL_CTRL_BAS);
- if (err)
+ if (err) {
+ mutex_unlock(&priv->pce_table_lock);
return err;
+ }
gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR);
gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
@@ -534,8 +539,10 @@ static int gswip_pce_table_entry_read(struct gswip_priv *priv,
err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
GSWIP_PCE_TBL_CTRL_BAS);
- if (err)
+ if (err) {
+ mutex_unlock(&priv->pce_table_lock);
return err;
+ }
for (i = 0; i < ARRAY_SIZE(tbl->key); i++)
tbl->key[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_KEY(i));
@@ -551,6 +558,8 @@ static int gswip_pce_table_entry_read(struct gswip_priv *priv,
tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD);
tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7;
+ mutex_unlock(&priv->pce_table_lock);
+
return 0;
}
@@ -563,10 +572,14 @@ static int gswip_pce_table_entry_write(struct gswip_priv *priv,
u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR :
GSWIP_PCE_TBL_CTRL_OPMOD_ADWR;
+ mutex_lock(&priv->pce_table_lock);
+
err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
GSWIP_PCE_TBL_CTRL_BAS);
- if (err)
+ if (err) {
+ mutex_unlock(&priv->pce_table_lock);
return err;
+ }
gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR);
gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
@@ -598,8 +611,12 @@ static int gswip_pce_table_entry_write(struct gswip_priv *priv,
crtl |= GSWIP_PCE_TBL_CTRL_BAS;
gswip_switch_w(priv, crtl, GSWIP_PCE_TBL_CTRL);
- return gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
- GSWIP_PCE_TBL_CTRL_BAS);
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+
+ mutex_unlock(&priv->pce_table_lock);
+
+ return err;
}
/* Add the LAN port into a bridge with the CPU port by
@@ -2040,6 +2057,7 @@ static int gswip_probe(struct platform_device *pdev)
priv->ds->priv = priv;
priv->ds->ops = &gswip_switch_ops;
priv->dev = dev;
+ mutex_init(&priv->pce_table_lock);
version = gswip_switch_r(priv, GSWIP_VERSION);
/* bring up the mdio bus */
--
2.33.0
From: Stephen Suryaputra <[email protected]>
[ Upstream commit 61e18ce7348bfefb5688a8bcd4b4d6b37c0f9b2a ]
When addr_gen_mode is set to IN6_ADDR_GEN_MODE_NONE, the link-local addr
should not be generated. But it isn't the case for GRE (as well as GRE6)
and SIT tunnels. Make it so that tunnels consider the addr_gen_mode,
especially for IN6_ADDR_GEN_MODE_NONE.
Do this in add_v4_addrs() to cover both GRE and SIT only if the addr
scope is link.
Signed-off-by: Stephen Suryaputra <[email protected]>
Acked-by: Antonio Quartulli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/addrconf.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 884d430e23cb3..29526937077b3 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3097,6 +3097,9 @@ static void sit_add_v4_addrs(struct inet6_dev *idev)
memcpy(&addr.s6_addr32[3], idev->dev->dev_addr, 4);
if (idev->dev->flags&IFF_POINTOPOINT) {
+ if (idev->cnf.addr_gen_mode == IN6_ADDR_GEN_MODE_NONE)
+ return;
+
addr.s6_addr32[0] = htonl(0xfe800000);
scope = IFA_LINK;
plen = 64;
--
2.33.0
From: Johannes Berg <[email protected]>
[ Upstream commit e5322b9ab5f63536c41301150b7ce64605ce52cc ]
Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
index 3123036978a59..caf38ef64d3ce 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
@@ -741,6 +741,9 @@ bool iwl_mvm_rx_diversity_allowed(struct iwl_mvm *mvm)
lockdep_assert_held(&mvm->mutex);
+ if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM)
+ return false;
+
if (num_of_ant(iwl_mvm_get_valid_rx_ant(mvm)) == 1)
return false;
--
2.33.0
From: Jens Axboe <[email protected]>
[ Upstream commit ba0ffdd8ce48ad7f7e85191cd29f9674caca3745 ]
Particularly for NVMe with efficient deferred submission for many
requests, there are nice benefits to be seen by bumping the default max
plug count from 16 to 32. This is especially true for virtualized setups,
where the submit part is more expensive. But can be noticed even on
native hardware.
Reduce the multiple queue factor from 4 to 2, since we're changing the
default size.
While changing it, move the defines into the block layer private header.
These aren't values that anyone outside of the block layer uses, or
should use.
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq.c | 4 ++--
block/blk.h | 6 ++++++
include/linux/blkdev.h | 2 --
3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 69cc552c3dfc9..e4422a09b1265 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2116,14 +2116,14 @@ static void blk_add_rq_to_plug(struct blk_plug *plug, struct request *rq)
}
/*
- * Allow 4x BLK_MAX_REQUEST_COUNT requests on plug queue for multiple
+ * Allow 2x BLK_MAX_REQUEST_COUNT requests on plug queue for multiple
* queues. This is important for md arrays to benefit from merging
* requests.
*/
static inline unsigned short blk_plug_max_rq_count(struct blk_plug *plug)
{
if (plug->multiple_queues)
- return BLK_MAX_REQUEST_COUNT * 4;
+ return BLK_MAX_REQUEST_COUNT * 2;
return BLK_MAX_REQUEST_COUNT;
}
diff --git a/block/blk.h b/block/blk.h
index f84c83300f6fa..997941cd999f6 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -188,6 +188,12 @@ bool blk_bio_list_merge(struct request_queue *q, struct list_head *list,
void blk_account_io_start(struct request *req);
void blk_account_io_done(struct request *req, u64 now);
+/*
+ * Plug flush limits
+ */
+#define BLK_MAX_REQUEST_COUNT 32
+#define BLK_PLUG_FLUSH_SIZE (128 * 1024)
+
/*
* Internal elevator interface
*/
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8aae375864b6b..4ba17736b614f 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1248,8 +1248,6 @@ struct blk_plug {
bool multiple_queues;
bool nowait;
};
-#define BLK_MAX_REQUEST_COUNT 16
-#define BLK_PLUG_FLUSH_SIZE (128 * 1024)
struct blk_plug_cb;
typedef void (*blk_plug_cb_fn)(struct blk_plug_cb *, bool);
--
2.33.0
From: Xiao Ni <[email protected]>
[ Upstream commit 8b9e2291e355a0eafdd5b1e21a94a6659f24b351 ]
When the in memory flag is changed, we need to persist the change in the
rdev superblock flags. This is needed for "writemostly" and "failfast".
Reviewed-by: Li Feng <[email protected]>
Signed-off-by: Xiao Ni <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/md.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index f16f190546ef3..7871e7dcd4836 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3024,7 +3024,11 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len)
* -write_error - clears WriteErrorSeen
* {,-}failfast - set/clear FailFast
*/
+
+ struct mddev *mddev = rdev->mddev;
int err = -EINVAL;
+ bool need_update_sb = false;
+
if (cmd_match(buf, "faulty") && rdev->mddev->pers) {
md_error(rdev->mddev, rdev);
if (test_bit(Faulty, &rdev->flags))
@@ -3039,7 +3043,6 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len)
if (rdev->raid_disk >= 0)
err = -EBUSY;
else {
- struct mddev *mddev = rdev->mddev;
err = 0;
if (mddev_is_clustered(mddev))
err = md_cluster_ops->remove_disk(mddev, rdev);
@@ -3056,10 +3059,12 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len)
} else if (cmd_match(buf, "writemostly")) {
set_bit(WriteMostly, &rdev->flags);
mddev_create_serial_pool(rdev->mddev, rdev, false);
+ need_update_sb = true;
err = 0;
} else if (cmd_match(buf, "-writemostly")) {
mddev_destroy_serial_pool(rdev->mddev, rdev, false);
clear_bit(WriteMostly, &rdev->flags);
+ need_update_sb = true;
err = 0;
} else if (cmd_match(buf, "blocked")) {
set_bit(Blocked, &rdev->flags);
@@ -3085,9 +3090,11 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len)
err = 0;
} else if (cmd_match(buf, "failfast")) {
set_bit(FailFast, &rdev->flags);
+ need_update_sb = true;
err = 0;
} else if (cmd_match(buf, "-failfast")) {
clear_bit(FailFast, &rdev->flags);
+ need_update_sb = true;
err = 0;
} else if (cmd_match(buf, "-insync") && rdev->raid_disk >= 0 &&
!test_bit(Journal, &rdev->flags)) {
@@ -3166,6 +3173,8 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len)
clear_bit(ExternalBbl, &rdev->flags);
err = 0;
}
+ if (need_update_sb)
+ md_update_sb(mddev, 1);
if (!err)
sysfs_notify_dirent_safe(rdev->sysfs_state);
return err ? err : len;
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit 738216c1953e802aa9f930c5d15b8f9092c847ff ]
In r592_remove(), the driver will free dma after freeing the host, which
may cause a UAF bug.
The following log reveals it:
[ 45.361796 ] BUG: KASAN: use-after-free in r592_remove+0x269/0x350 [r592]
[ 45.364286 ] Call Trace:
[ 45.364472 ] dump_stack_lvl+0xa8/0xd1
[ 45.364751 ] print_address_description+0x87/0x3b0
[ 45.365137 ] kasan_report+0x172/0x1c0
[ 45.365415 ] ? r592_remove+0x269/0x350 [r592]
[ 45.365834 ] ? r592_remove+0x269/0x350 [r592]
[ 45.366168 ] __asan_report_load8_noabort+0x14/0x20
[ 45.366531 ] r592_remove+0x269/0x350 [r592]
[ 45.378785 ]
[ 45.378903 ] Allocated by task 4674:
[ 45.379162 ] ____kasan_kmalloc+0xb5/0xe0
[ 45.379455 ] __kasan_kmalloc+0x9/0x10
[ 45.379730 ] __kmalloc+0x150/0x280
[ 45.379984 ] memstick_alloc_host+0x2a/0x190
[ 45.380664 ]
[ 45.380781 ] Freed by task 5509:
[ 45.381014 ] kasan_set_track+0x3d/0x70
[ 45.381293 ] kasan_set_free_info+0x23/0x40
[ 45.381635 ] ____kasan_slab_free+0x10b/0x140
[ 45.381950 ] __kasan_slab_free+0x11/0x20
[ 45.382241 ] slab_free_freelist_hook+0x81/0x150
[ 45.382575 ] kfree+0x13e/0x290
[ 45.382805 ] memstick_free+0x1c/0x20
[ 45.383070 ] device_release+0x9c/0x1d0
[ 45.383349 ] kobject_put+0x2ef/0x4c0
[ 45.383616 ] put_device+0x1f/0x30
[ 45.383865 ] memstick_free_host+0x24/0x30
[ 45.384162 ] r592_remove+0x242/0x350 [r592]
[ 45.384473 ] pci_device_remove+0xa9/0x250
Signed-off-by: Zheyu Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memstick/host/r592.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c
index d2ef46337191c..eaa2a94d18be4 100644
--- a/drivers/memstick/host/r592.c
+++ b/drivers/memstick/host/r592.c
@@ -837,15 +837,15 @@ static void r592_remove(struct pci_dev *pdev)
}
memstick_remove_host(dev->host);
+ if (dev->dummy_dma_page)
+ dma_free_coherent(&pdev->dev, PAGE_SIZE, dev->dummy_dma_page,
+ dev->dummy_dma_page_physical_address);
+
free_irq(dev->irq, dev);
iounmap(dev->mmio);
pci_release_regions(pdev);
pci_disable_device(pdev);
memstick_free_host(dev->host);
-
- if (dev->dummy_dma_page)
- dma_free_coherent(&pdev->dev, PAGE_SIZE, dev->dummy_dma_page,
- dev->dummy_dma_page_physical_address);
}
#ifdef CONFIG_PM_SLEEP
--
2.33.0
From: Lasse Collin <[email protected]>
[ Upstream commit 83d3c4f22a36d005b55f44628f46cc0d319a75e8 ]
With valid files, the safety margin described in lib/decompress_unxz.c
ensures that these buffers cannot overlap. But if the uncompressed size
of the input is larger than the caller thought, which is possible when
the input file is invalid/corrupt, the buffers can overlap. Obviously
the result will then be garbage (and usually the decoder will return
an error too) but no other harm will happen when such an over-run occurs.
This change only affects uncompressed LZMA2 chunks and so this
should have no effect on performance.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lasse Collin <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/decompress_unxz.c | 2 +-
lib/xz/xz_dec_lzma2.c | 21 +++++++++++++++++++--
2 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/lib/decompress_unxz.c b/lib/decompress_unxz.c
index 25d59a95bd668..abea25310ac73 100644
--- a/lib/decompress_unxz.c
+++ b/lib/decompress_unxz.c
@@ -167,7 +167,7 @@
* memeq and memzero are not used much and any remotely sane implementation
* is fast enough. memcpy/memmove speed matters in multi-call mode, but
* the kernel image is decompressed in single-call mode, in which only
- * memcpy speed can matter and only if there is a lot of uncompressible data
+ * memmove speed can matter and only if there is a lot of uncompressible data
* (LZMA2 stores uncompressible chunks in uncompressed form). Thus, the
* functions below should just be kept small; it's probably not worth
* optimizing for speed.
diff --git a/lib/xz/xz_dec_lzma2.c b/lib/xz/xz_dec_lzma2.c
index 65a1aad8c223b..a18b52759fd91 100644
--- a/lib/xz/xz_dec_lzma2.c
+++ b/lib/xz/xz_dec_lzma2.c
@@ -387,7 +387,14 @@ static void dict_uncompressed(struct dictionary *dict, struct xz_buf *b,
*left -= copy_size;
- memcpy(dict->buf + dict->pos, b->in + b->in_pos, copy_size);
+ /*
+ * If doing in-place decompression in single-call mode and the
+ * uncompressed size of the file is larger than the caller
+ * thought (i.e. it is invalid input!), the buffers below may
+ * overlap and cause undefined behavior with memcpy().
+ * With valid inputs memcpy() would be fine here.
+ */
+ memmove(dict->buf + dict->pos, b->in + b->in_pos, copy_size);
dict->pos += copy_size;
if (dict->full < dict->pos)
@@ -397,7 +404,11 @@ static void dict_uncompressed(struct dictionary *dict, struct xz_buf *b,
if (dict->pos == dict->end)
dict->pos = 0;
- memcpy(b->out + b->out_pos, b->in + b->in_pos,
+ /*
+ * Like above but for multi-call mode: use memmove()
+ * to avoid undefined behavior with invalid input.
+ */
+ memmove(b->out + b->out_pos, b->in + b->in_pos,
copy_size);
}
@@ -421,6 +432,12 @@ static uint32_t dict_flush(struct dictionary *dict, struct xz_buf *b)
if (dict->pos == dict->end)
dict->pos = 0;
+ /*
+ * These buffers cannot overlap even if doing in-place
+ * decompression because in multi-call mode dict->buf
+ * has been allocated by us in this file; it's not
+ * provided by the caller like in single-call mode.
+ */
memcpy(b->out + b->out_pos, dict->buf + dict->start,
copy_size);
}
--
2.33.0
From: Waiman Long <[email protected]>
[ Upstream commit 7ee285395b211cad474b2b989db52666e0430daf ]
It was found that the following warning was displayed when remounting
controllers from cgroup v2 to v1:
[ 8042.997778] WARNING: CPU: 88 PID: 80682 at kernel/cgroup/cgroup.c:3130 cgroup_apply_control_disable+0x158/0x190
:
[ 8043.091109] RIP: 0010:cgroup_apply_control_disable+0x158/0x190
[ 8043.096946] Code: ff f6 45 54 01 74 39 48 8d 7d 10 48 c7 c6 e0 46 5a a4 e8 7b 67 33 00 e9 41 ff ff ff 49 8b 84 24 e8 01 00 00 0f b7 40 08 eb 95 <0f> 0b e9 5f ff ff ff 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3
[ 8043.115692] RSP: 0018:ffffba8a47c23d28 EFLAGS: 00010202
[ 8043.120916] RAX: 0000000000000036 RBX: ffffffffa624ce40 RCX: 000000000000181a
[ 8043.128047] RDX: ffffffffa63c43e0 RSI: ffffffffa63c43e0 RDI: ffff9d7284ee1000
[ 8043.135180] RBP: ffff9d72874c5800 R08: ffffffffa624b090 R09: 0000000000000004
[ 8043.142314] R10: ffffffffa624b080 R11: 0000000000002000 R12: ffff9d7284ee1000
[ 8043.149447] R13: ffff9d7284ee1000 R14: ffffffffa624ce70 R15: ffffffffa6269e20
[ 8043.156576] FS: 00007f7747cff740(0000) GS:ffff9d7a5fc00000(0000) knlGS:0000000000000000
[ 8043.164663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8043.170409] CR2: 00007f7747e96680 CR3: 0000000887d60001 CR4: 00000000007706e0
[ 8043.177539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8043.184673] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8043.191804] PKRU: 55555554
[ 8043.194517] Call Trace:
[ 8043.196970] rebind_subsystems+0x18c/0x470
[ 8043.201070] cgroup_setup_root+0x16c/0x2f0
[ 8043.205177] cgroup1_root_to_use+0x204/0x2a0
[ 8043.209456] cgroup1_get_tree+0x3e/0x120
[ 8043.213384] vfs_get_tree+0x22/0xb0
[ 8043.216883] do_new_mount+0x176/0x2d0
[ 8043.220550] __x64_sys_mount+0x103/0x140
[ 8043.224474] do_syscall_64+0x38/0x90
[ 8043.228063] entry_SYSCALL_64_after_hwframe+0x44/0xae
It was caused by the fact that rebind_subsystem() disables
controllers to be rebound one by one. If more than one disabled
controllers are originally from the default hierarchy, it means that
cgroup_apply_control_disable() will be called multiple times for the
same default hierarchy. A controller may be killed by css_kill() in
the first round. In the second round, the killed controller may not be
completely dead yet leading to the warning.
To avoid this problem, we collect all the ssid's of controllers that
needed to be disabled from the default hierarchy and then disable them
in one go instead of one by one.
Fixes: 334c3679ec4b ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends")
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cgroup/cgroup.c | 31 +++++++++++++++++++++++++++----
1 file changed, 27 insertions(+), 4 deletions(-)
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index 60d38e2f69dd8..a86857edaa571 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -1711,6 +1711,7 @@ int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask)
struct cgroup *dcgrp = &dst_root->cgrp;
struct cgroup_subsys *ss;
int ssid, i, ret;
+ u16 dfl_disable_ss_mask = 0;
lockdep_assert_held(&cgroup_mutex);
@@ -1727,8 +1728,28 @@ int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask)
/* can't move between two non-dummy roots either */
if (ss->root != &cgrp_dfl_root && dst_root != &cgrp_dfl_root)
return -EBUSY;
+
+ /*
+ * Collect ssid's that need to be disabled from default
+ * hierarchy.
+ */
+ if (ss->root == &cgrp_dfl_root)
+ dfl_disable_ss_mask |= 1 << ssid;
+
} while_each_subsys_mask();
+ if (dfl_disable_ss_mask) {
+ struct cgroup *scgrp = &cgrp_dfl_root.cgrp;
+
+ /*
+ * Controllers from default hierarchy that need to be rebound
+ * are all disabled together in one go.
+ */
+ cgrp_dfl_root.subsys_mask &= ~dfl_disable_ss_mask;
+ WARN_ON(cgroup_apply_control(scgrp));
+ cgroup_finalize_control(scgrp, 0);
+ }
+
do_each_subsys_mask(ss, ssid, ss_mask) {
struct cgroup_root *src_root = ss->root;
struct cgroup *scgrp = &src_root->cgrp;
@@ -1737,10 +1758,12 @@ int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask)
WARN_ON(!css || cgroup_css(dcgrp, ss));
- /* disable from the source */
- src_root->subsys_mask &= ~(1 << ssid);
- WARN_ON(cgroup_apply_control(scgrp));
- cgroup_finalize_control(scgrp, 0);
+ if (src_root != &cgrp_dfl_root) {
+ /* disable from the source */
+ src_root->subsys_mask &= ~(1 << ssid);
+ WARN_ON(cgroup_apply_control(scgrp));
+ cgroup_finalize_control(scgrp, 0);
+ }
/* rebind */
RCU_INIT_POINTER(scgrp->subsys[ssid], NULL);
--
2.33.0
From: Kees Cook <[email protected]>
[ Upstream commit eda9a4f7af6ee47e9e131f20e4f8a41a97379293 ]
When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections
due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select
CONFIG_TIMER_OF when enaling OMAP_DM_TIMER:
arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table'
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: Tony Lindgren <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Cc: Keerthy <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Ladislav Michl <[email protected]>
Cc: Grygorii Strashko <[email protected]>
Cc: [email protected]
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 39f4d88662002..a0c6e88bebe08 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -24,6 +24,7 @@ config I8253_LOCK
config OMAP_DM_TIMER
bool
+ select TIMER_OF
config CLKBLD_I8253
def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
--
2.33.0
From: Zhang Qiao <[email protected]>
[ Upstream commit 4ef0c5c6b5ba1f38f0ea1cedad0cad722f00c14a ]
There is a small race between copy_process() and sched_fork()
where child->sched_task_group point to an already freed pointer.
parent doing fork() | someone moving the parent
| to another cgroup
-------------------------------+-------------------------------
copy_process()
+ dup_task_struct()<1>
parent move to another cgroup,
and free the old cgroup. <2>
+ sched_fork()
+ __set_task_cpu()<3>
+ task_fork_fair()
+ sched_slice()<4>
In the worst case, this bug can lead to "use-after-free" and
cause panic as shown above:
(1) parent copy its sched_task_group to child at <1>;
(2) someone move the parent to another cgroup and free the old
cgroup at <2>;
(3) the sched_task_group and cfs_rq that belong to the old cgroup
will be accessed at <3> and <4>, which cause a panic:
[] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[] PGD 8000001fa0a86067 P4D 8000001fa0a86067 PUD 2029955067 PMD 0
[] Oops: 0000 [#1] SMP PTI
[] CPU: 7 PID: 648398 Comm: ebizzy Kdump: loaded Tainted: G OE --------- - - 4.18.0.x86_64+ #1
[] RIP: 0010:sched_slice+0x84/0xc0
[] Call Trace:
[] task_fork_fair+0x81/0x120
[] sched_fork+0x132/0x240
[] copy_process.part.5+0x675/0x20e0
[] ? __handle_mm_fault+0x63f/0x690
[] _do_fork+0xcd/0x3b0
[] do_syscall_64+0x5d/0x1d0
[] entry_SYSCALL_64_after_hwframe+0x65/0xca
[] RIP: 0033:0x7f04418cd7e1
Between cgroup_can_fork() and cgroup_post_fork(), the cgroup
membership and thus sched_task_group can't change. So update child's
sched_task_group at sched_post_fork() and move task_fork() and
__set_task_cpu() (where accees the sched_task_group) from sched_fork()
to sched_post_fork().
Fixes: 8323f26ce342 ("sched: Fix race in task_group")
Signed-off-by: Zhang Qiao <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sched/task.h | 3 ++-
kernel/fork.c | 2 +-
kernel/sched/core.c | 43 +++++++++++++++++++-------------------
3 files changed, 25 insertions(+), 23 deletions(-)
diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h
index 85fb2f34c59b7..24cacb1ca654d 100644
--- a/include/linux/sched/task.h
+++ b/include/linux/sched/task.h
@@ -55,7 +55,8 @@ extern asmlinkage void schedule_tail(struct task_struct *prev);
extern void init_idle(struct task_struct *idle, int cpu);
extern int sched_fork(unsigned long clone_flags, struct task_struct *p);
-extern void sched_post_fork(struct task_struct *p);
+extern void sched_post_fork(struct task_struct *p,
+ struct kernel_clone_args *kargs);
extern void sched_dead(struct task_struct *p);
void __noreturn do_task_dead(void);
diff --git a/kernel/fork.c b/kernel/fork.c
index 3f96400a0ac61..773b44be81f9d 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2310,7 +2310,7 @@ static __latent_entropy struct task_struct *copy_process(
write_unlock_irq(&tasklist_lock);
proc_fork_connector(p);
- sched_post_fork(p);
+ sched_post_fork(p, args);
cgroup_post_fork(p, args);
perf_event_fork(p);
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index e4551d1736fa3..bc8ff11e60242 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3231,8 +3231,6 @@ static inline void init_schedstats(void) {}
*/
int sched_fork(unsigned long clone_flags, struct task_struct *p)
{
- unsigned long flags;
-
__sched_fork(clone_flags, p);
/*
* We mark the process as NEW here. This guarantees that
@@ -3278,24 +3276,6 @@ int sched_fork(unsigned long clone_flags, struct task_struct *p)
init_entity_runnable_average(&p->se);
- /*
- * The child is not yet in the pid-hash so no cgroup attach races,
- * and the cgroup is pinned to this child due to cgroup_fork()
- * is ran before sched_fork().
- *
- * Silence PROVE_RCU.
- */
- raw_spin_lock_irqsave(&p->pi_lock, flags);
- rseq_migrate(p);
- /*
- * We're setting the CPU for the first time, we don't migrate,
- * so use __set_task_cpu().
- */
- __set_task_cpu(p, smp_processor_id());
- if (p->sched_class->task_fork)
- p->sched_class->task_fork(p);
- raw_spin_unlock_irqrestore(&p->pi_lock, flags);
-
#ifdef CONFIG_SCHED_INFO
if (likely(sched_info_on()))
memset(&p->sched_info, 0, sizeof(p->sched_info));
@@ -3311,8 +3291,29 @@ int sched_fork(unsigned long clone_flags, struct task_struct *p)
return 0;
}
-void sched_post_fork(struct task_struct *p)
+void sched_post_fork(struct task_struct *p, struct kernel_clone_args *kargs)
{
+ unsigned long flags;
+#ifdef CONFIG_CGROUP_SCHED
+ struct task_group *tg;
+#endif
+
+ raw_spin_lock_irqsave(&p->pi_lock, flags);
+#ifdef CONFIG_CGROUP_SCHED
+ tg = container_of(kargs->cset->subsys[cpu_cgrp_id],
+ struct task_group, css);
+ p->sched_task_group = autogroup_task_group(p, tg);
+#endif
+ rseq_migrate(p);
+ /*
+ * We're setting the CPU for the first time, we don't migrate,
+ * so use __set_task_cpu().
+ */
+ __set_task_cpu(p, smp_processor_id());
+ if (p->sched_class->task_fork)
+ p->sched_class->task_fork(p);
+ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+
uclamp_post_fork(p);
}
--
2.33.0
From: Max Gurtovoy <[email protected]>
[ Upstream commit 09748122009aed7bfaa7acc33c10c083a4758322 ]
In case that icdoff is not zero or mandatory keyed sgls are not
supported by the NVMe/RDMA target, we'll go to error flow but we'll
return 0 to the caller. Fix it by returning an appropriate error code.
Fixes: c66e2998c8ca ("nvme-rdma: centralize controller setup sequence")
Signed-off-by: Max Gurtovoy <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/rdma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 51f4647ea2142..1b90563818434 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1103,11 +1103,13 @@ static int nvme_rdma_setup_ctrl(struct nvme_rdma_ctrl *ctrl, bool new)
return ret;
if (ctrl->ctrl.icdoff) {
+ ret = -EOPNOTSUPP;
dev_err(ctrl->ctrl.device, "icdoff is not supported!\n");
goto destroy_admin;
}
if (!(ctrl->ctrl.sgls & (1 << 2))) {
+ ret = -EOPNOTSUPP;
dev_err(ctrl->ctrl.device,
"Mandatory keyed sgls are not supported!\n");
goto destroy_admin;
--
2.33.0
From: Joerg Roedel <[email protected]>
[ Upstream commit 5681981fb788281b09a4ea14d310d30b2bd89132 ]
The value of STACK_TYPE_EXCEPTION_LAST points to the last _valid_
exception stack. Reflect that in the check done in the
vc_switch_off_ist() function.
Fixes: a13644f3a53de ("x86/entry/64: Add entry code for #VC handler")
Reported-by: Tom Lendacky <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/traps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 7692bf7908e6c..143fcb8af38f4 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -701,7 +701,7 @@ asmlinkage __visible noinstr struct pt_regs *vc_switch_off_ist(struct pt_regs *r
stack = (unsigned long *)sp;
if (!get_stack_info_noinstr(stack, current, &info) || info.type == STACK_TYPE_ENTRY ||
- info.type >= STACK_TYPE_EXCEPTION_LAST)
+ info.type > STACK_TYPE_EXCEPTION_LAST)
sp = __this_cpu_ist_top_va(VC2);
sync:
--
2.33.0
From: Stefan Agner <[email protected]>
[ Upstream commit 2641b62d2fab52648e34cdc6994b2eacde2d27c1 ]
Some Micrel KSZ8041NL PHY chips exhibit continuous RX errors after using
the power down mode bit (0.11). If the PHY is taken out of power down
mode in a certain temperature range, the PHY enters a weird state which
leads to continuously reporting RX errors. In that state, the MAC is not
able to receive or send any Ethernet frames and the activity LED is
constantly blinking. Since Linux is using the suspend callback when the
interface is taken down, ending up in that state can easily happen
during a normal startup.
Micrel confirmed the issue in errata DS80000700A [*], caused by abnormal
clock recovery when using power down mode. Even the latest revision (A4,
Revision ID 0x1513) seems to suffer that problem, and according to the
errata is not going to be fixed.
Remove the suspend/resume callback to avoid using the power down mode
completely.
[*] https://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf
Fixes: 1a5465f5d6a2 ("phy/micrel: Add suspend/resume support to Micrel PHYs")
Signed-off-by: Stefan Agner <[email protected]>
Acked-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/micrel.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index b341a8be09f92..92e94ac94a342 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1216,8 +1216,9 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ /* No suspend/resume callbacks because of errata DS80000700A,
+ * receiver error following software power down.
+ */
}, {
.phy_id = PHY_ID_KSZ8041RNLI,
.phy_id_mask = MICREL_PHY_ID_MASK,
--
2.33.0
From: Jessica Zhang <[email protected]>
[ Upstream commit 8bf71a5719b6cc5b6ba358096081e5d50ea23ab6 ]
Move initialization of sblk in _sspp_subblk_offset() after NULL check to
avoid potential NULL pointer dereference.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Jessica Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
index c940b69435e16..016c462bdb5d2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
@@ -138,11 +138,13 @@ static int _sspp_subblk_offset(struct dpu_hw_pipe *ctx,
u32 *idx)
{
int rc = 0;
- const struct dpu_sspp_sub_blks *sblk = ctx->cap->sblk;
+ const struct dpu_sspp_sub_blks *sblk;
- if (!ctx)
+ if (!ctx || !ctx->cap || !ctx->cap->sblk)
return -EINVAL;
+ sblk = ctx->cap->sblk;
+
switch (s_id) {
case DPU_SSPP_SRC:
*idx = sblk->src_blk.base;
@@ -419,7 +421,7 @@ static void _dpu_hw_sspp_setup_scaler3(struct dpu_hw_pipe *ctx,
(void)pe;
if (_sspp_subblk_offset(ctx, DPU_SSPP_SCALER_QSEED3, &idx) || !sspp
- || !scaler3_cfg || !ctx || !ctx->cap || !ctx->cap->sblk)
+ || !scaler3_cfg)
return;
dpu_hw_setup_scaler3(&ctx->hw, scaler3_cfg, idx,
--
2.33.0
From: Helge Deller <[email protected]>
[ Upstream commit 9cc2fa4f4a92ccc6760d764e7341be46ee8aaaa1 ]
The function end_of_stack() returns a pointer to the last entry of a
stack. For architectures like parisc where the stack grows upwards
return the pointer to the highest address in the stack.
Without this change I faced a crash on parisc, because the stackleak
functionality wrote STACKLEAK_POISON to the lowest address and thus
overwrote the first 4 bytes of the task_struct which included the
TIF_FLAGS.
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sched/task_stack.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/linux/sched/task_stack.h b/include/linux/sched/task_stack.h
index 2413427e439c7..d10150587d819 100644
--- a/include/linux/sched/task_stack.h
+++ b/include/linux/sched/task_stack.h
@@ -25,7 +25,11 @@ static inline void *task_stack_page(const struct task_struct *task)
static inline unsigned long *end_of_stack(const struct task_struct *task)
{
+#ifdef CONFIG_STACK_GROWSUP
+ return (unsigned long *)((unsigned long)task->stack + THREAD_SIZE) - 1;
+#else
return task->stack;
+#endif
}
#elif !defined(__HAVE_THREAD_FUNCTIONS)
--
2.33.0
From: Pradeep Kumar Chitrapu <[email protected]>
[ Upstream commit 9d6ae1f5cf733c0e8d7f904c501fd015c4b9f0f4 ]
Frequency in rx status is being filled incorrectly in the 6 GHz band as
channel number received is invalid in this case which is causing packet
drops. So fix that.
Fixes: 5dcf42f8b79d ("ath11k: Use freq instead of channel number in rx path")
Signed-off-by: Pradeep Kumar Chitrapu <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/dp_rx.c | 9 ++++++---
drivers/net/wireless/ath/ath11k/wmi.c | 10 +++++++---
2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index 7d6fd8155bb22..2e77dca6b1ad6 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -2303,8 +2303,10 @@ static void ath11k_dp_rx_h_ppdu(struct ath11k *ar, struct hal_rx_desc *rx_desc,
channel_num = ath11k_dp_rx_h_msdu_start_freq(rx_desc);
center_freq = ath11k_dp_rx_h_msdu_start_freq(rx_desc) >> 16;
- if (center_freq >= 5935 && center_freq <= 7105) {
+ if (center_freq >= ATH11K_MIN_6G_FREQ &&
+ center_freq <= ATH11K_MAX_6G_FREQ) {
rx_status->band = NL80211_BAND_6GHZ;
+ rx_status->freq = center_freq;
} else if (channel_num >= 1 && channel_num <= 14) {
rx_status->band = NL80211_BAND_2GHZ;
} else if (channel_num >= 36 && channel_num <= 173) {
@@ -2322,8 +2324,9 @@ static void ath11k_dp_rx_h_ppdu(struct ath11k *ar, struct hal_rx_desc *rx_desc,
rx_desc, sizeof(struct hal_rx_desc));
}
- rx_status->freq = ieee80211_channel_to_frequency(channel_num,
- rx_status->band);
+ if (rx_status->band != NL80211_BAND_6GHZ)
+ rx_status->freq = ieee80211_channel_to_frequency(channel_num,
+ rx_status->band);
ath11k_dp_rx_h_rate(ar, rx_desc, rx_status);
}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index e17419c8dde0d..74ebe8e7d1d81 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5668,8 +5668,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb)
if (rx_ev.status & WMI_RX_STATUS_ERR_MIC)
status->flag |= RX_FLAG_MMIC_ERROR;
- if (rx_ev.chan_freq >= ATH11K_MIN_6G_FREQ) {
+ if (rx_ev.chan_freq >= ATH11K_MIN_6G_FREQ &&
+ rx_ev.chan_freq <= ATH11K_MAX_6G_FREQ) {
status->band = NL80211_BAND_6GHZ;
+ status->freq = rx_ev.chan_freq;
} else if (rx_ev.channel >= 1 && rx_ev.channel <= 14) {
status->band = NL80211_BAND_2GHZ;
} else if (rx_ev.channel >= 36 && rx_ev.channel <= ATH11K_MAX_5G_CHAN) {
@@ -5690,8 +5692,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb)
sband = &ar->mac.sbands[status->band];
- status->freq = ieee80211_channel_to_frequency(rx_ev.channel,
- status->band);
+ if (status->band != NL80211_BAND_6GHZ)
+ status->freq = ieee80211_channel_to_frequency(rx_ev.channel,
+ status->band);
+
status->signal = rx_ev.snr + ATH11K_DEFAULT_NOISE_FLOOR;
status->rate_idx = ath11k_mac_bitrate_to_idx(sband, rx_ev.rate / 100);
--
2.33.0
From: Anson Jacob <[email protected]>
[ Upstream commit bc39a69a2ac484e6575a958567c162ef56c9f278 ]
Limit when FPU is enabled to only functions that does FPU operations for
dcn20_resource_construct, which gets called during driver
initialization.
Enabling FPU operation disables preemption. Sleeping functions(mutex
(un)lock, memory allocation using GFP_KERNEL, etc.) should not be called
when preemption is disabled.
Fixes the following case caught by enabling
CONFIG_DEBUG_ATOMIC_SLEEP in kernel config
[ 1.338434] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[ 1.347395] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 197, name: systemd-udevd
[ 1.356356] CPU: 7 PID: 197 Comm: systemd-udevd Not tainted 5.13.0+ #3
[ 1.356358] Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021
[ 1.356360] Call Trace:
[ 1.356361] dump_stack+0x6b/0x86
[ 1.356366] ___might_sleep.cold+0x87/0x98
[ 1.356370] __might_sleep+0x4b/0x80
[ 1.356372] mutex_lock+0x21/0x50
[ 1.356376] smu_get_uclk_dpm_states+0x3f/0x80 [amdgpu]
[ 1.356538] pp_nv_get_uclk_dpm_states+0x35/0x50 [amdgpu]
[ 1.356711] init_soc_bounding_box+0xf9/0x210 [amdgpu]
[ 1.356892] ? create_object+0x20d/0x340
[ 1.356897] ? dcn20_resource_construct+0x46f/0xd30 [amdgpu]
[ 1.357077] dcn20_resource_construct+0x4b1/0xd30 [amdgpu]
...
Tested on: 5700XT (NAVI10 0x1002:0x731F 0x1DA2:0xE410 0xC1)
Cc: Christian König <[email protected]>
Cc: Hersen Wu <[email protected]>
Cc: Anson Jacob <[email protected]>
Cc: Harry Wentland <[email protected]>
Reviewed-by: Rodrigo Siqueira <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Acked-by: Agustin Gutierrez <[email protected]>
Signed-off-by: Anson Jacob <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../drm/amd/display/dc/dcn20/dcn20_resource.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 5dbc290bcbe86..3121816546467 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -3754,16 +3754,22 @@ static bool init_soc_bounding_box(struct dc *dc,
clock_limits_available = (status == PP_SMU_RESULT_OK);
}
- if (clock_limits_available && uclk_states_available && num_states)
+ if (clock_limits_available && uclk_states_available && num_states) {
+ DC_FP_START();
dcn20_update_bounding_box(dc, loaded_bb, &max_clocks, uclk_states, num_states);
- else if (clock_limits_available)
+ DC_FP_END();
+ } else if (clock_limits_available) {
+ DC_FP_START();
dcn20_cap_soc_clocks(loaded_bb, max_clocks);
+ DC_FP_END();
+ }
}
loaded_ip->max_num_otg = pool->base.res_cap->num_timing_generator;
loaded_ip->max_num_dpp = pool->base.pipe_count;
+ DC_FP_START();
dcn20_patch_bounding_box(dc, loaded_bb);
-
+ DC_FP_END();
return true;
}
@@ -3783,8 +3789,6 @@ static bool dcn20_resource_construct(
enum dml_project dml_project_version =
get_dml_project_version(ctx->asic_id.hw_internal_rev);
- DC_FP_START();
-
ctx->dc_bios->regs = &bios_regs;
pool->base.funcs = &dcn20_res_pool_funcs;
@@ -4128,12 +4132,10 @@ static bool dcn20_resource_construct(
pool->base.oem_device = NULL;
}
- DC_FP_END();
return true;
create_fail:
- DC_FP_END();
dcn20_resource_destruct(pool);
return false;
--
2.33.0
From: Sven Schnelle <[email protected]>
[ Upstream commit 1030d681319b43869e0d5b568b9d0226652d1a6f ]
I've got the following splat after enabling preemption:
[ 3.724721] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1
[ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50
[ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ #324
[ 3.744605] Hardware name: 9000/785/C8000
[ 3.744605] Backtrace:
[ 3.744605] [<00000000401d9d58>] show_stack+0x74/0xb0
[ 3.744605] [<0000000040c27bd4>] dump_stack_lvl+0x10c/0x188
[ 3.744605] [<0000000040c27c84>] dump_stack+0x34/0x48
[ 3.744605] [<0000000040c33438>] check_preemption_disabled+0x178/0x1b0
[ 3.744605] [<0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50
[ 3.744605] [<00000000401d632c>] flush_tlb_all+0x58/0x2e0
[ 3.744605] [<00000000401075c0>] 0x401075c0
[ 3.744605] [<000000004010b8fc>] 0x4010b8fc
[ 3.744605] [<00000000401080fc>] 0x401080fc
[ 3.744605] [<00000000401d5224>] do_one_initcall+0x128/0x378
[ 3.744605] [<0000000040102de8>] 0x40102de8
[ 3.744605] [<0000000040c33864>] kernel_init+0x60/0x3a8
[ 3.744605] [<00000000401d1020>] ret_from_kernel_thread+0x20/0x28
[ 3.744605]
Fix this by moving the __inc_irq_stat() into the locked section.
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/mm/init.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 3ec633b11b542..8f10cc6ee0fce 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -844,9 +844,9 @@ void flush_tlb_all(void)
{
int do_recycle;
- __inc_irq_stat(irq_tlb_count);
do_recycle = 0;
spin_lock(&sid_lock);
+ __inc_irq_stat(irq_tlb_count);
if (dirty_space_ids > RECYCLE_THRESHOLD) {
BUG_ON(recycle_inuse); /* FIXME: Use a semaphore/wait queue here */
get_dirty_sids(&recycle_ndirty,recycle_dirty_array);
@@ -865,8 +865,8 @@ void flush_tlb_all(void)
#else
void flush_tlb_all(void)
{
- __inc_irq_stat(irq_tlb_count);
spin_lock(&sid_lock);
+ __inc_irq_stat(irq_tlb_count);
flush_tlb_all_local(NULL);
recycle_sids();
spin_unlock(&sid_lock);
--
2.33.0
From: Michael Walle <[email protected]>
[ Upstream commit f20311cc9c58052e0b215013046cbf390937910c ]
On newer CAAM versions, not all accelerators are disabled if the SoC is
a non-E variant. While the driver checks most of the modules for
availability, there is one - PKHA - which sticks out. On non-E variants
it is still reported as available, that is the number of instances is
non-zero, but it has limited functionality. In particular it doesn't
support encryption and decryption, but just signing and verifying. This
is indicated by a bit in the PKHA_MISC field. Take this bit into account
if we are checking for availability.
This will the following error:
[ 8.167817] caam_jr 8020000.jr: 20000b0f: CCB: desc idx 11: : Invalid CHA selected.
Tested on an NXP LS1028A (non-E) SoC.
Fixes: d239b10d4ceb ("crypto: caam - add register map changes cf. Era 10")
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Horia Geantă <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/caam/caampkc.c | 19 +++++++++++++++----
drivers/crypto/caam/regs.h | 3 +++
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
index dd5f101e43f83..3acc825da4cca 100644
--- a/drivers/crypto/caam/caampkc.c
+++ b/drivers/crypto/caam/caampkc.c
@@ -1152,16 +1152,27 @@ static struct caam_akcipher_alg caam_rsa = {
int caam_pkc_init(struct device *ctrldev)
{
struct caam_drv_private *priv = dev_get_drvdata(ctrldev);
- u32 pk_inst;
+ u32 pk_inst, pkha;
int err;
init_done = false;
/* Determine public key hardware accelerator presence. */
- if (priv->era < 10)
+ if (priv->era < 10) {
pk_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
CHA_ID_LS_PK_MASK) >> CHA_ID_LS_PK_SHIFT;
- else
- pk_inst = rd_reg32(&priv->ctrl->vreg.pkha) & CHA_VER_NUM_MASK;
+ } else {
+ pkha = rd_reg32(&priv->ctrl->vreg.pkha);
+ pk_inst = pkha & CHA_VER_NUM_MASK;
+
+ /*
+ * Newer CAAMs support partially disabled functionality. If this is the
+ * case, the number is non-zero, but this bit is set to indicate that
+ * no encryption or decryption is supported. Only signing and verifying
+ * is supported.
+ */
+ if (pkha & CHA_VER_MISC_PKHA_NO_CRYPT)
+ pk_inst = 0;
+ }
/* Do not register algorithms if PKHA is not present. */
if (!pk_inst)
diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h
index af61f3a2c0d46..3738625c02509 100644
--- a/drivers/crypto/caam/regs.h
+++ b/drivers/crypto/caam/regs.h
@@ -322,6 +322,9 @@ struct version_regs {
/* CHA Miscellaneous Information - AESA_MISC specific */
#define CHA_VER_MISC_AES_GCM BIT(1 + CHA_VER_MISC_SHIFT)
+/* CHA Miscellaneous Information - PKHA_MISC specific */
+#define CHA_VER_MISC_PKHA_NO_CRYPT BIT(7 + CHA_VER_MISC_SHIFT)
+
/*
* caam_perfmon - Performance Monitor/Secure Memory Status/
* CAAM Global Status/Component Version IDs
--
2.33.0
From: Sriram R <[email protected]>
[ Upstream commit 1db2b0d0a39102238fcbf9092cefa65a710642e9 ]
Whenever ath11k is bootup with a user country already set, cfg80211
notifies this country info to ath11k soon after registration, where the
notification is sent to the firmware for fetching the rules of this user
country input.
Multiple race conditions could be seen in this scenario where a new
request is either lost as pointed in [1] or a new regd overwrites the
default regd provided by the firmware during bootup. Note that, the
default regd is used for intersection purpose and hence it should not be
overwritten.
The main reason as pointed by [1] is the usage of ATH11K_FLAG_REGISTERED
flag which is updated after completion of core registration, whereas the
reg notification from cfg80211 and wmi events for the corresponding
request can happen much before that. Since the ATH11K_FLAG_REGISTERED is
currently used to determine if the event containing reg rules belong to
default regd or for user request, there is a possibility of the default
regd getting overwritten.
Since the default reg rules will be received only once per pdev on
firmware load, the above flag based check can be replaced with a check
to see if default_regd is already set, so that we can now always update
the new_regd. Also if the new_regd is set, this will be always used to
update the reg rules for the registered phy.
[1] https://patchwork.kernel.org/project/linux-wireless/patch/1829665.1PRlr7bOQj@ripper/
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sriram R <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 2 +-
drivers/net/wireless/ath/ath11k/reg.c | 11 ++++++-----
drivers/net/wireless/ath/ath11k/reg.h | 2 +-
drivers/net/wireless/ath/ath11k/wmi.c | 16 ++++++----------
4 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 63d70aecbd0f1..0924bc8b35205 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -6320,7 +6320,7 @@ static int __ath11k_mac_register(struct ath11k *ar)
ar->hw->wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MONITOR);
/* Apply the regd received during initialization */
- ret = ath11k_regd_update(ar, true);
+ ret = ath11k_regd_update(ar);
if (ret) {
ath11k_err(ar->ab, "ath11k regd update failed: %d\n", ret);
goto err_unregister_hw;
diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 678d0885fcee7..b8f9f34408879 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -198,7 +198,7 @@ static void ath11k_copy_regd(struct ieee80211_regdomain *regd_orig,
sizeof(struct ieee80211_reg_rule));
}
-int ath11k_regd_update(struct ath11k *ar, bool init)
+int ath11k_regd_update(struct ath11k *ar)
{
struct ieee80211_regdomain *regd, *regd_copy = NULL;
int ret, regd_len, pdev_id;
@@ -209,7 +209,10 @@ int ath11k_regd_update(struct ath11k *ar, bool init)
spin_lock_bh(&ab->base_lock);
- if (init) {
+ /* Prefer the latest regd update over default if it's available */
+ if (ab->new_regd[pdev_id]) {
+ regd = ab->new_regd[pdev_id];
+ } else {
/* Apply the regd received during init through
* WMI_REG_CHAN_LIST_CC event. In case of failure to
* receive the regd, initialize with a default world
@@ -222,8 +225,6 @@ int ath11k_regd_update(struct ath11k *ar, bool init)
"failed to receive default regd during init\n");
regd = (struct ieee80211_regdomain *)&ath11k_world_regd;
}
- } else {
- regd = ab->new_regd[pdev_id];
}
if (!regd) {
@@ -680,7 +681,7 @@ void ath11k_regd_update_work(struct work_struct *work)
regd_update_work);
int ret;
- ret = ath11k_regd_update(ar, false);
+ ret = ath11k_regd_update(ar);
if (ret) {
/* Firmware has already moved to the new regd. We need
* to maintain channel consistency across FW, Host driver
diff --git a/drivers/net/wireless/ath/ath11k/reg.h b/drivers/net/wireless/ath/ath11k/reg.h
index 39b7fc9435415..7dbbba9fae1d2 100644
--- a/drivers/net/wireless/ath/ath11k/reg.h
+++ b/drivers/net/wireless/ath/ath11k/reg.h
@@ -30,6 +30,6 @@ void ath11k_regd_update_work(struct work_struct *work);
struct ieee80211_regdomain *
ath11k_reg_build_regd(struct ath11k_base *ab,
struct cur_regulatory_info *reg_info, bool intersect);
-int ath11k_regd_update(struct ath11k *ar, bool init);
+int ath11k_regd_update(struct ath11k *ar);
int ath11k_reg_update_chan_list(struct ath11k *ar);
#endif
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index cf0f778b0cbc9..e17419c8dde0d 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5410,10 +5410,10 @@ static int ath11k_reg_chan_list_event(struct ath11k_base *ab, struct sk_buff *sk
}
spin_lock(&ab->base_lock);
- if (test_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags)) {
- /* Once mac is registered, ar is valid and all CC events from
- * fw is considered to be received due to user requests
- * currently.
+ if (ab->default_regd[pdev_idx]) {
+ /* The initial rules from FW after WMI Init is to build
+ * the default regd. From then on, any rules updated for
+ * the pdev could be due to user reg changes.
* Free previously built regd before assigning the newly
* generated regd to ar. NULL pointer handling will be
* taken care by kfree itself.
@@ -5423,13 +5423,9 @@ static int ath11k_reg_chan_list_event(struct ath11k_base *ab, struct sk_buff *sk
ab->new_regd[pdev_idx] = regd;
ieee80211_queue_work(ar->hw, &ar->regd_update_work);
} else {
- /* Multiple events for the same *ar is not expected. But we
- * can still clear any previously stored default_regd if we
- * are receiving this event for the same radio by mistake.
- * NULL pointer handling will be taken care by kfree itself.
+ /* This regd would be applied during mac registration and is
+ * held constant throughout for regd intersection purpose
*/
- kfree(ab->default_regd[pdev_idx]);
- /* This regd would be applied during mac registration */
ab->default_regd[pdev_idx] = regd;
}
ab->dfs_region = reg_info->dfs_region;
--
2.33.0
From: Jiasheng Jiang <[email protected]>
[ Upstream commit acde891c243c1ed85b19d4d5042bdf00914f5739 ]
Directly using _usecs_to_jiffies() might be unsafe, so it's
better to use usecs_to_jiffies() instead.
Because we can see that the result of _usecs_to_jiffies()
could be larger than MAX_JIFFY_OFFSET values without the
check of the input.
Fixes: c410bf01933e ("Fix the excessive initial retransmission timeout")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/rxrpc/rtt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/rxrpc/rtt.c b/net/rxrpc/rtt.c
index 4e565eeab4260..be61d6f5be8d1 100644
--- a/net/rxrpc/rtt.c
+++ b/net/rxrpc/rtt.c
@@ -22,7 +22,7 @@ static u32 rxrpc_rto_min_us(struct rxrpc_peer *peer)
static u32 __rxrpc_set_rto(const struct rxrpc_peer *peer)
{
- return _usecs_to_jiffies((peer->srtt_us >> 3) + peer->rttvar_us);
+ return usecs_to_jiffies((peer->srtt_us >> 3) + peer->rttvar_us);
}
static u32 rxrpc_bound_rto(u32 rto)
--
2.33.0
From: Fabio Estevam <[email protected]>
[ Upstream commit 019edd01d174ce4bb2e517dd332922514d176601 ]
On a i.MX-based board with a QCA9377 Wifi chip, the following errors
are seen after launching the 'hostapd' application:
hostapd /etc/wifi.conf
Configuration file: /etc/wifi.conf
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
Using interface wlan0 with hwaddr 00:1f:7b:31:04:a0 and ssid "thessid"
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: interface state COUNTRY_UPDATE->ENABLED
wlan0: AP-ENABLED
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
...
Fix this problem by adding the BH locking around napi-schedule(),
in the same way it was done in commit e63052a5dd3c ("mlx5e: add
add missing BH locking around napi_schdule()").
Its commit log provides the following explanation:
"It's not correct to call napi_schedule() in pure process
context. Because we use __raise_softirq_irqoff() we require
callers to be in a context which will eventually lead to
softirq handling (hardirq, bh disabled, etc.).
With code as is users will see:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
"
Fixes: cfee8793a74d ("ath10k: enable napi on RX path for sdio")
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/sdio.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 81ddaafb6721c..0fe639710a8bb 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1363,8 +1363,11 @@ static void ath10k_rx_indication_async_work(struct work_struct *work)
ep->ep_ops.ep_rx_complete(ar, skb);
}
- if (test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
+ if (test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) {
+ local_bh_disable();
napi_schedule(&ar->napi);
+ local_bh_enable();
+ }
}
static int ath10k_sdio_read_rtc_state(struct ath10k_sdio *ar_sdio, unsigned char *state)
--
2.33.0
From: Linus Walleij <[email protected]>
[ Upstream commit 5f5f12f5d4b108399130bb5c11f07765851d9cdb ]
The max VLAN number with non-4K VLAN activated is 15, and the
range is 0..15. Not 16.
The impact should be low since we by default have 4K VLAN and
thus have 4095 VLANs to play with in this switch. There will
not be a problem unless the code is rewritten to only use
16 VLANs.
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: Mauri Sandberg <[email protected]>
Cc: DENG Qingfang <[email protected]>
Cc: Florian Fainelli <[email protected]>
Reviewed-by: Alvin Šipraga <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/rtl8366rb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index cfe56960f44b9..12d7e5cd31974 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -1343,7 +1343,7 @@ static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index)
static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
{
- unsigned int max = RTL8366RB_NUM_VLANS;
+ unsigned int max = RTL8366RB_NUM_VLANS - 1;
if (smi->vlan4k_enabled)
max = RTL8366RB_NUM_VIDS - 1;
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit aadf7c81a0771b8f1c97dabca6a48bae1b387779 ]
The ath11k_dbring_bufs_replenish() and ath11k_dbring_fill_bufs()
take a "gfp" parameter but they since they take spinlocks, the
allocations they do have to be atomic. This causes a bug because
ath11k_dbring_buf_setup passes GFP_KERNEL for the gfp flags.
The fix is to use GFP_ATOMIC and remove the unused parameters.
Fixes: bd6478559e27 ("ath11k: Add direct buffer ring support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20210812070434.GE31863@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/dbring.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dbring.c b/drivers/net/wireless/ath/ath11k/dbring.c
index 5e1f5437b4185..fd98ba5b1130b 100644
--- a/drivers/net/wireless/ath/ath11k/dbring.c
+++ b/drivers/net/wireless/ath/ath11k/dbring.c
@@ -8,8 +8,7 @@
static int ath11k_dbring_bufs_replenish(struct ath11k *ar,
struct ath11k_dbring *ring,
- struct ath11k_dbring_element *buff,
- gfp_t gfp)
+ struct ath11k_dbring_element *buff)
{
struct ath11k_base *ab = ar->ab;
struct hal_srng *srng;
@@ -35,7 +34,7 @@ static int ath11k_dbring_bufs_replenish(struct ath11k *ar,
goto err;
spin_lock_bh(&ring->idr_lock);
- buf_id = idr_alloc(&ring->bufs_idr, buff, 0, ring->bufs_max, gfp);
+ buf_id = idr_alloc(&ring->bufs_idr, buff, 0, ring->bufs_max, GFP_ATOMIC);
spin_unlock_bh(&ring->idr_lock);
if (buf_id < 0) {
ret = -ENOBUFS;
@@ -72,8 +71,7 @@ err:
}
static int ath11k_dbring_fill_bufs(struct ath11k *ar,
- struct ath11k_dbring *ring,
- gfp_t gfp)
+ struct ath11k_dbring *ring)
{
struct ath11k_dbring_element *buff;
struct hal_srng *srng;
@@ -92,11 +90,11 @@ static int ath11k_dbring_fill_bufs(struct ath11k *ar,
size = sizeof(*buff) + ring->buf_sz + align - 1;
while (num_remain > 0) {
- buff = kzalloc(size, gfp);
+ buff = kzalloc(size, GFP_ATOMIC);
if (!buff)
break;
- ret = ath11k_dbring_bufs_replenish(ar, ring, buff, gfp);
+ ret = ath11k_dbring_bufs_replenish(ar, ring, buff);
if (ret) {
ath11k_warn(ar->ab, "failed to replenish db ring num_remain %d req_ent %d\n",
num_remain, req_entries);
@@ -176,7 +174,7 @@ int ath11k_dbring_buf_setup(struct ath11k *ar,
ring->hp_addr = ath11k_hal_srng_get_hp_addr(ar->ab, srng);
ring->tp_addr = ath11k_hal_srng_get_tp_addr(ar->ab, srng);
- ret = ath11k_dbring_fill_bufs(ar, ring, GFP_KERNEL);
+ ret = ath11k_dbring_fill_bufs(ar, ring);
return ret;
}
@@ -322,7 +320,7 @@ int ath11k_dbring_buffer_release_event(struct ath11k_base *ab,
}
memset(buff, 0, size);
- ath11k_dbring_bufs_replenish(ar, ring, buff, GFP_ATOMIC);
+ ath11k_dbring_bufs_replenish(ar, ring, buff);
}
spin_unlock_bh(&srng->lock);
--
2.33.0
From: Sudarshan Rajagopalan <[email protected]>
[ Upstream commit 8fac67ca236b961b573355e203dbaf62a706a2e5 ]
After new memory blocks have been hotplugged, max_pfn and max_low_pfn
needs updating to reflect on new PFNs being hot added to system.
Without this patch, debug-related functions that use max_pfn such as
get_max_dump_pfn() or read_page_owner() will not work with any page in
memory that is hot-added after boot.
Fixes: 4ab215061554 ("arm64: Add memory hotplug support")
Signed-off-by: Sudarshan Rajagopalan <[email protected]>
Signed-off-by: Chris Goldsworthy <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Georgi Djakov <[email protected]>
Tested-by: Georgi Djakov <[email protected]>
Link: https://lore.kernel.org/r/a51a27ee7be66024b5ce626310d673f24107bcb8.1632853776.git.quic_cgoldswo@quicinc.com
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/mm/mmu.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 58dc93e566179..2601a514d8c4a 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -1492,6 +1492,11 @@ int arch_add_memory(int nid, u64 start, u64 size,
if (ret)
__remove_pgd_mapping(swapper_pg_dir,
__phys_to_virt(start), size);
+ else {
+ max_pfn = PFN_UP(start + size);
+ max_low_pfn = max_pfn;
+ }
+
return ret;
}
--
2.33.0
From: Kees Cook <[email protected]>
[ Upstream commit dfadec236aa99f6086141949c9dc3ec50f3ff20d ]
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Texas Instruments Wl1273 FM Rad".
Suggested-by: Hans Verkuil <[email protected]>
Fixes: 87d1a50ce451 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/radio/radio-wl1273.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index 1123768731676..484046471c03f 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -1279,7 +1279,7 @@ static int wl1273_fm_vidioc_querycap(struct file *file, void *priv,
strscpy(capability->driver, WL1273_FM_DRIVER_NAME,
sizeof(capability->driver));
- strscpy(capability->card, "Texas Instruments Wl1273 FM Radio",
+ strscpy(capability->card, "TI Wl1273 FM Radio",
sizeof(capability->card));
strscpy(capability->bus_info, radio->bus_type,
sizeof(capability->bus_info));
--
2.33.0
From: Giovanni Cabiddu <[email protected]>
[ Upstream commit 9b768e8a3909ac1ab39ed44a3933716da7761a6f ]
Detect a PFVF collision between the local and the remote function by
checking if the message on the PFVF CSR has been overwritten.
This is done after the remote function confirms that the message has
been received, by clearing the interrupt bit, or the maximum number of
attempts (ADF_IOV_MSG_ACK_MAX_RETRY) to check the CSR has been exceeded.
Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <[email protected]>
Co-developed-by: Marco Chiappero <[email protected]>
Signed-off-by: Marco Chiappero <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index e829c6aaf16fd..a5bd77d0f0487 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -150,6 +150,13 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
val = ADF_CSR_RD(pmisc_bar_addr, pf2vf_offset);
} while ((val & int_bit) && (count++ < ADF_IOV_MSG_ACK_MAX_RETRY));
+ if (val != msg) {
+ dev_dbg(&GET_DEV(accel_dev),
+ "Collision - PFVF CSR overwritten by remote function\n");
+ ret = -EIO;
+ goto out;
+ }
+
if (val & int_bit) {
dev_dbg(&GET_DEV(accel_dev), "ACK not received from remote\n");
val &= ~int_bit;
--
2.33.0
From: Kees Cook <[email protected]>
[ Upstream commit 2908249f3878a591f7918368fdf0b7b0a6c3158c ]
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Silicon Labs Si470x FM Radio Re".
Suggested-by: Hans Verkuil <[email protected]>
Fixes: 78656acdcf48 ("V4L/DVB (7038): USB radio driver for Silicon Labs Si470x FM Radio Receivers")
Fixes: cc35bbddfe10 ("V4L/DVB (12416): radio-si470x: add i2c driver for si470x")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/radio/si470x/radio-si470x-i2c.c | 2 +-
drivers/media/radio/si470x/radio-si470x-usb.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index f491420d7b538..a972c0705ac79 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -11,7 +11,7 @@
/* driver definitions */
#define DRIVER_AUTHOR "Joonyoung Shim <[email protected]>";
-#define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
+#define DRIVER_CARD "Silicon Labs Si470x FM Radio"
#define DRIVER_DESC "I2C radio driver for Si470x FM Radio Receivers"
#define DRIVER_VERSION "1.0.2"
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index fedff68d8c496..3f8634a465730 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -16,7 +16,7 @@
/* driver definitions */
#define DRIVER_AUTHOR "Tobias Lorenz <[email protected]>"
-#define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
+#define DRIVER_CARD "Silicon Labs Si470x FM Radio"
#define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers"
#define DRIVER_VERSION "1.0.10"
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit 335aea75b0d95518951cad7c4c676e6f1c02c150 ]
The overflow check in amdgpu_bo_list_create() causes a warning with
clang-14 on 64-bit architectures, since the limit can never be
exceeded.
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c:74:18: error: result of comparison of constant 256204778801521549 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (num_entries > (SIZE_MAX - sizeof(struct amdgpu_bo_list))
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The check remains useful for 32-bit architectures, so just avoid the
warning by using size_t as the type for the count.
Fixes: 920990cb080a ("drm/amdgpu: allocate the bo_list array after the list")
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c
index 15c45b2a39835..714178f1b6c6e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c
@@ -61,7 +61,7 @@ static void amdgpu_bo_list_free(struct kref *ref)
int amdgpu_bo_list_create(struct amdgpu_device *adev, struct drm_file *filp,
struct drm_amdgpu_bo_list_entry *info,
- unsigned num_entries, struct amdgpu_bo_list **result)
+ size_t num_entries, struct amdgpu_bo_list **result)
{
unsigned last_entry = 0, first_userptr = num_entries;
struct amdgpu_bo_list_entry *array;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.h
index a130e766cbdbe..529d52a204cf4 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.h
@@ -60,7 +60,7 @@ int amdgpu_bo_create_list_entry_array(struct drm_amdgpu_bo_list_in *in,
int amdgpu_bo_list_create(struct amdgpu_device *adev,
struct drm_file *filp,
struct drm_amdgpu_bo_list_entry *info,
- unsigned num_entries,
+ size_t num_entries,
struct amdgpu_bo_list **list);
static inline struct amdgpu_bo_list_entry *
--
2.33.0
From: Anel Orazgaliyeva <[email protected]>
[ Upstream commit e5f5a66c9aa9c331da5527c2e3fd9394e7091e01 ]
Commit c343bf1ba5ef ("cpuidle: Fix three reference count leaks")
fixes the cleanup of kobjects; however, it removes kfree() calls
altogether, leading to memory leaks.
Fix those and also defer the initialization of dev->kobj_dev until
after the error check, so that we do not end up with a dangling
pointer.
Fixes: c343bf1ba5ef ("cpuidle: Fix three reference count leaks")
Signed-off-by: Anel Orazgaliyeva <[email protected]>
Suggested-by: Aman Priyadarshi <[email protected]>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpuidle/sysfs.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 53ec9585ccd44..469e18547d06c 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -488,6 +488,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
&kdev->kobj, "state%d", i);
if (ret) {
kobject_put(&kobj->kobj);
+ kfree(kobj);
goto error_state;
}
cpuidle_add_s2idle_attr_group(kobj);
@@ -619,6 +620,7 @@ static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
&kdev->kobj, "driver");
if (ret) {
kobject_put(&kdrv->kobj);
+ kfree(kdrv);
return ret;
}
@@ -705,7 +707,6 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
if (!kdev)
return -ENOMEM;
kdev->dev = dev;
- dev->kobj_dev = kdev;
init_completion(&kdev->kobj_unregister);
@@ -713,9 +714,11 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
"cpuidle");
if (error) {
kobject_put(&kdev->kobj);
+ kfree(kdev);
return error;
}
+ dev->kobj_dev = kdev;
kobject_uevent(&kdev->kobj, KOBJ_ADD);
return 0;
--
2.33.0
From: Linus Lüssing <[email protected]>
[ Upstream commit 4925642d541278575ad1948c5924d71ffd57ef14 ]
In tests with two Lima boards from 8devices (QCA4531 based) on OpenWrt
19.07 we could force a silent restart of a device with no serial
output when we were sending a high amount of UDP traffic (iperf3 at 80
MBit/s in both directions from external hosts, saturating the wifi and
causing a load of about 4.5 to 6) and were then triggering an
ath9k_queue_reset().
Further debugging showed that the restart was caused by the ath79
watchdog. With disabled watchdog we could observe that the device was
constantly going into ath_isr() interrupt handler and was returning
early after the ATH_OP_HW_RESET flag test, without clearing any
interrupts. Even though ath9k_queue_reset() calls
ath9k_hw_kill_interrupts().
With JTAG we could observe the following race condition:
1) ath9k_queue_reset()
...
-> ath9k_hw_kill_interrupts()
-> set_bit(ATH_OP_HW_RESET, &common->op_flags);
...
<- returns
2) ath9k_tasklet()
...
-> ath9k_hw_resume_interrupts()
...
<- returns
3) loops around:
...
handle_int()
-> ath_isr()
...
-> if (test_bit(ATH_OP_HW_RESET,
&common->op_flags))
return IRQ_HANDLED;
x) ath_reset_internal():
=> never reached <=
And in ath_isr() we would typically see the following interrupts /
interrupt causes:
* status: 0x00111030 or 0x00110030
* async_cause: 2 (AR_INTR_MAC_IPQ)
* sync_cause: 0
So the ath9k_tasklet() reenables the ath9k interrupts
through ath9k_hw_resume_interrupts() which ath9k_queue_reset() had just
disabled. And ath_isr() then keeps firing because it returns IRQ_HANDLED
without actually clearing the interrupt.
To fix this IRQ storm also clear/disable the interrupts again when we
are in reset state.
Cc: Sven Eckelmann <[email protected]>
Cc: Simon Wunderlich <[email protected]>
Cc: Linus Lüssing <[email protected]>
Fixes: 872b5d814f99 ("ath9k: do not access hardware on IRQs during reset")
Signed-off-by: Linus Lüssing <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 5739c1dbf1661..af367696fd92f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -533,8 +533,10 @@ irqreturn_t ath_isr(int irq, void *dev)
ath9k_debug_sync_cause(sc, sync_cause);
status &= ah->imask; /* discard unasked-for bits */
- if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
+ if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) {
+ ath9k_hw_kill_interrupts(sc->sc_ah);
return IRQ_HANDLED;
+ }
/*
* If there are no status bits set, then this interrupt was not
--
2.33.0
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 7b1394892de8d95748d05e3ee41e85edb4abbfa1 ]
Relax this condition to make add and update commands idempotent for sets
with no timeout. The eval function already checks if the set element
timeout is available and updates it if the update command is used.
Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_dynset.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c
index 5c84a968dae29..58904bee1a0df 100644
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -141,17 +141,8 @@ static int nft_dynset_init(const struct nft_ctx *ctx,
return -EBUSY;
priv->op = ntohl(nla_get_be32(tb[NFTA_DYNSET_OP]));
- switch (priv->op) {
- case NFT_DYNSET_OP_ADD:
- case NFT_DYNSET_OP_DELETE:
- break;
- case NFT_DYNSET_OP_UPDATE:
- if (!(set->flags & NFT_SET_TIMEOUT))
- return -EOPNOTSUPP;
- break;
- default:
+ if (priv->op > NFT_DYNSET_OP_DELETE)
return -EOPNOTSUPP;
- }
timeout = 0;
if (tb[NFTA_DYNSET_TIMEOUT] != NULL) {
--
2.33.0
From: Markus Schneider-Pargmann <[email protected]>
[ Upstream commit b6f5f0c8f72d348b2d07b20d7b680ef13a7ffe98 ]
Currently mtk_rng_runtime_suspend/resume is called for both runtime pm
and system sleep operations.
This is wrong as these should only be runtime ops as the name already
suggests. Currently freezing the system will lead to a call to
mtk_rng_runtime_suspend even if the device currently isn't active. This
leads to a clock warning because it is disabled/unprepared although it
isn't enabled/prepared currently.
This patch fixes this by only setting the runtime pm ops and forces to
call the runtime pm ops from the system sleep ops as well if active but
not otherwise.
Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support")
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hw_random/mtk-rng.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
index 8ad7b515a51b8..6c00ea0085553 100644
--- a/drivers/char/hw_random/mtk-rng.c
+++ b/drivers/char/hw_random/mtk-rng.c
@@ -166,8 +166,13 @@ static int mtk_rng_runtime_resume(struct device *dev)
return mtk_rng_init(&priv->rng);
}
-static UNIVERSAL_DEV_PM_OPS(mtk_rng_pm_ops, mtk_rng_runtime_suspend,
- mtk_rng_runtime_resume, NULL);
+static const struct dev_pm_ops mtk_rng_pm_ops = {
+ SET_RUNTIME_PM_OPS(mtk_rng_runtime_suspend,
+ mtk_rng_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+};
+
#define MTK_RNG_PM_OPS (&mtk_rng_pm_ops)
#else /* CONFIG_PM */
#define MTK_RNG_PM_OPS NULL
--
2.33.0
From: Pavel Skripkin <[email protected]>
[ Upstream commit 2c98b8a3458df03abdc6945bbef67ef91d181938 ]
If em28xx dev has ->dev_next pointer, we need to delete ->dev_next list
node from em28xx_extension_devlist on disconnect to avoid UAF bugs and
corrupted list bugs, since driver frees this pointer on disconnect.
Reported-and-tested-by: [email protected]
Fixes: 1a23f81b7dc3 ("V4L/DVB (9979): em28xx: move usb probe code to a proper place")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/em28xx/em28xx-cards.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 5144888ae36f7..cf45cc566cbe2 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -4089,8 +4089,11 @@ static void em28xx_usb_disconnect(struct usb_interface *intf)
em28xx_close_extension(dev);
- if (dev->dev_next)
+ if (dev->dev_next) {
+ em28xx_close_extension(dev->dev_next);
em28xx_release_resources(dev->dev_next);
+ }
+
em28xx_release_resources(dev);
if (dev->dev_next) {
--
2.33.0
From: Tony Lindgren <[email protected]>
[ Upstream commit d806e334d0390502cd2a820ad33d65d7f9bba618 ]
We need to restore context in a specified order with HCTL set in two
phases. This is similar to what omap_hsmmc_context_restore() is doing.
Otherwise SDIO can stop working on resume.
And for PM runtime and SDIO cards, we need to also save SYSCTL, IE and
ISE.
This should not be a problem currently, and these patches can be applied
whenever suitable.
Fixes: ee0f309263a6 ("mmc: sdhci-omap: Add Support for Suspend/Resume")
Signed-off-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-omap.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 8a669f57f14b3..53c362bb28661 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -62,6 +62,8 @@
#define SDHCI_OMAP_IE 0x234
#define INT_CC_EN BIT(0)
+#define SDHCI_OMAP_ISE 0x238
+
#define SDHCI_OMAP_AC12 0x23c
#define AC12_V1V8_SIGEN BIT(19)
#define AC12_SCLK_SEL BIT(23)
@@ -113,6 +115,8 @@ struct sdhci_omap_host {
u32 hctl;
u32 sysctl;
u32 capa;
+ u32 ie;
+ u32 ise;
};
static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
@@ -1246,14 +1250,23 @@ static void sdhci_omap_context_save(struct sdhci_omap_host *omap_host)
{
omap_host->con = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
omap_host->hctl = sdhci_omap_readl(omap_host, SDHCI_OMAP_HCTL);
+ omap_host->sysctl = sdhci_omap_readl(omap_host, SDHCI_OMAP_SYSCTL);
omap_host->capa = sdhci_omap_readl(omap_host, SDHCI_OMAP_CAPA);
+ omap_host->ie = sdhci_omap_readl(omap_host, SDHCI_OMAP_IE);
+ omap_host->ise = sdhci_omap_readl(omap_host, SDHCI_OMAP_ISE);
}
+/* Order matters here, HCTL must be restored in two phases */
static void sdhci_omap_context_restore(struct sdhci_omap_host *omap_host)
{
- sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, omap_host->con);
sdhci_omap_writel(omap_host, SDHCI_OMAP_HCTL, omap_host->hctl);
sdhci_omap_writel(omap_host, SDHCI_OMAP_CAPA, omap_host->capa);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_HCTL, omap_host->hctl);
+
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_SYSCTL, omap_host->sysctl);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, omap_host->con);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_IE, omap_host->ie);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_ISE, omap_host->ise);
}
static int __maybe_unused sdhci_omap_suspend(struct device *dev)
--
2.33.0
From: Tony Lindgren <[email protected]>
[ Upstream commit 8e0e7bd38b1ec7f9e5d18725ad41828be4e09859 ]
If sdhci-omap is configured for an unused device instance and the device
is not set as disabled, we can get a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address
00000045
...
(regulator_set_voltage) from [<c07d7008>] (mmc_regulator_set_ocr+0x44/0xd0)
(mmc_regulator_set_ocr) from [<c07e2d80>] (sdhci_set_ios+0xa4/0x490)
(sdhci_set_ios) from [<c07ea690>] (sdhci_omap_set_ios+0x124/0x160)
(sdhci_omap_set_ios) from [<c07c8e94>] (mmc_power_up.part.0+0x3c/0x154)
(mmc_power_up.part.0) from [<c07c9d20>] (mmc_start_host+0x88/0x9c)
(mmc_start_host) from [<c07cad34>] (mmc_add_host+0x58/0x7c)
(mmc_add_host) from [<c07e2574>] (__sdhci_add_host+0xf0/0x22c)
(__sdhci_add_host) from [<c07eaf68>] (sdhci_omap_probe+0x318/0x72c)
(sdhci_omap_probe) from [<c06a39d8>] (platform_probe+0x58/0xb8)
AFAIK we are not seeing this with the devices configured in the mainline
kernel but this can cause issues for folks bringing up their boards.
Fixes: 7d326930d352 ("mmc: sdhci-omap: Add OMAP SDHCI driver")
Signed-off-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-omap.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 7893fd3599b61..8a669f57f14b3 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -682,7 +682,8 @@ static void sdhci_omap_set_power(struct sdhci_host *host, unsigned char mode,
{
struct mmc_host *mmc = host->mmc;
- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
}
static int sdhci_omap_enable_dma(struct sdhci_host *host)
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit beae4a6258e64af609ad5995cc6b6056eb0d898e ]
The "msh" pointer is device managed, meaning that memstick_alloc_host()
calls device_initialize() on it. That means that it can't be free
using kfree() but must instead be freed with memstick_free_host().
Otherwise it leads to a tiny memory leak of device resources.
Fixes: 60fdd931d577 ("memstick: add support for JMicron jmb38x MemoryStick host controller")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20211011123912.GD15188@kili
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memstick/host/jmb38x_ms.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index e83c3ada9389e..9e8cccbd2817e 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -882,7 +882,7 @@ static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
iounmap(host->addr);
err_out_free:
- kfree(msh);
+ memstick_free_host(msh);
return NULL;
}
--
2.33.0
From: Daniel Borkmann <[email protected]>
[ Upstream commit e4400bbf5b15750e1b59bf4722d18d99be60c69f ]
The NTF_EXT_LEARNED neigh flag is usually propagated back to user space
upon dump of the neighbor table. However, when used in combination with
NTF_USE flag this is not the case despite exempting the entry from the
garbage collector. This results in inconsistent state since entries are
typically marked in neigh->flags with NTF_EXT_LEARNED, but here they are
not. Fix it by propagating the creation flag to ___neigh_create().
Before fix:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
After fix:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
Fixes: 9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Roopa Prabhu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/neighbour.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index c452ebf209394..01e243a578e9c 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -380,7 +380,7 @@ EXPORT_SYMBOL(neigh_ifdown);
static struct neighbour *neigh_alloc(struct neigh_table *tbl,
struct net_device *dev,
- bool exempt_from_gc)
+ u8 flags, bool exempt_from_gc)
{
struct neighbour *n = NULL;
unsigned long now = jiffies;
@@ -413,6 +413,7 @@ do_alloc:
n->updated = n->used = now;
n->nud_state = NUD_NONE;
n->output = neigh_blackhole;
+ n->flags = flags;
seqlock_init(&n->hh.hh_lock);
n->parms = neigh_parms_clone(&tbl->parms);
timer_setup(&n->timer, neigh_timer_handler, 0);
@@ -576,19 +577,18 @@ struct neighbour *neigh_lookup_nodev(struct neigh_table *tbl, struct net *net,
}
EXPORT_SYMBOL(neigh_lookup_nodev);
-static struct neighbour *___neigh_create(struct neigh_table *tbl,
- const void *pkey,
- struct net_device *dev,
- bool exempt_from_gc, bool want_ref)
+static struct neighbour *
+___neigh_create(struct neigh_table *tbl, const void *pkey,
+ struct net_device *dev, u8 flags,
+ bool exempt_from_gc, bool want_ref)
{
- struct neighbour *n1, *rc, *n = neigh_alloc(tbl, dev, exempt_from_gc);
- u32 hash_val;
- unsigned int key_len = tbl->key_len;
- int error;
+ u32 hash_val, key_len = tbl->key_len;
+ struct neighbour *n1, *rc, *n;
struct neigh_hash_table *nht;
+ int error;
+ n = neigh_alloc(tbl, dev, flags, exempt_from_gc);
trace_neigh_create(tbl, dev, pkey, n, exempt_from_gc);
-
if (!n) {
rc = ERR_PTR(-ENOBUFS);
goto out;
@@ -675,7 +675,7 @@ out_neigh_release:
struct neighbour *__neigh_create(struct neigh_table *tbl, const void *pkey,
struct net_device *dev, bool want_ref)
{
- return ___neigh_create(tbl, pkey, dev, false, want_ref);
+ return ___neigh_create(tbl, pkey, dev, 0, false, want_ref);
}
EXPORT_SYMBOL(__neigh_create);
@@ -1950,7 +1950,9 @@ static int neigh_add(struct sk_buff *skb, struct nlmsghdr *nlh,
exempt_from_gc = ndm->ndm_state & NUD_PERMANENT ||
ndm->ndm_flags & NTF_EXT_LEARNED;
- neigh = ___neigh_create(tbl, dst, dev, exempt_from_gc, true);
+ neigh = ___neigh_create(tbl, dst, dev,
+ ndm->ndm_flags & NTF_EXT_LEARNED,
+ exempt_from_gc, true);
if (IS_ERR(neigh)) {
err = PTR_ERR(neigh);
goto out;
--
2.33.0
From: Zev Weiss <[email protected]>
[ Upstream commit b7931a7b0e0df4d2a25fedd895ad32c746b77bc1 ]
Maintaining this manually is error prone (there are currently only
five chips supported, not six); gcc can do it for us automatically.
Signed-off-by: Zev Weiss <[email protected]>
Fixes: 666c14906b49 ("hwmon: (pmbus/lm25066) Drop support for LM25063")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pmbus/lm25066.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
index d14f923b3740d..17199a1104c72 100644
--- a/drivers/hwmon/pmbus/lm25066.c
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -51,7 +51,7 @@ struct __coeff {
#define PSC_CURRENT_IN_L (PSC_NUM_CLASSES)
#define PSC_POWER_L (PSC_NUM_CLASSES + 1)
-static struct __coeff lm25066_coeff[6][PSC_NUM_CLASSES + 2] = {
+static struct __coeff lm25066_coeff[][PSC_NUM_CLASSES + 2] = {
[lm25056] = {
[PSC_VOLTAGE_IN] = {
.m = 16296,
--
2.33.0
From: Nathan Chancellor <[email protected]>
[ Upstream commit fd96e35ea7b95f1e216277805be89d66e4ae962d ]
A new warning in clang points out a use of bitwise OR with boolean
expressions in this driver:
drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
else if ((strlencmp(cmd, "level disengaged") == 0) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning
1 error generated.
This should clearly be a logical OR so change it to fix the warning.
Fixes: fe98a52ce754 ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1476
Reported-by: Tor Vic <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/thinkpad_acpi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 5c2f2e337b57b..2a313643e0388 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -9097,7 +9097,7 @@ static int fan_write_cmd_level(const char *cmd, int *rc)
if (strlencmp(cmd, "level auto") == 0)
level = TP_EC_FAN_AUTO;
- else if ((strlencmp(cmd, "level disengaged") == 0) |
+ else if ((strlencmp(cmd, "level disengaged") == 0) ||
(strlencmp(cmd, "level full-speed") == 0))
level = TP_EC_FAN_FULLSPEED;
else if (sscanf(cmd, "level %d", &level) != 1)
--
2.33.0
From: Matthew Auld <[email protected]>
[ Upstream commit f5d28856b89baab4232a9f841e565763fcebcdf9 ]
In commit:
commit 09ac4fcb3f255e9225967c75f5893325c116cdbe
Author: Felix Kuehling <[email protected]>
Date: Thu Jul 13 17:01:16 2017 -0400
drm/ttm: Implement vm_operations_struct.access v2
we added the vm_access hook, where we also directly call tt_swapin for
some reason. If something is swapped-out then the ttm_tt must also be
unpopulated, and since access_kmap should also call tt_populate, if
needed, then swapping-in will already be handled there.
If anything, calling tt_swapin directly here would likely always fail
since the tt->pages won't yet be populated, or worse since the tt->pages
array is never actually cleared in unpopulate this might lead to a nasty
uaf.
Fixes: 09ac4fcb3f25 ("drm/ttm: Implement vm_operations_struct.access v2")
Signed-off-by: Matthew Auld <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Christian König <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/ttm/ttm_bo_vm.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 98a006fc30a58..0b1daf442425f 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -500,11 +500,6 @@ int ttm_bo_vm_access(struct vm_area_struct *vma, unsigned long addr,
switch (bo->mem.mem_type) {
case TTM_PL_SYSTEM:
- if (unlikely(bo->ttm->page_flags & TTM_PAGE_FLAG_SWAPPED)) {
- ret = ttm_tt_swapin(bo->ttm);
- if (unlikely(ret != 0))
- return ret;
- }
fallthrough;
case TTM_PL_TT:
ret = ttm_bo_vm_access_kmap(bo, offset, buf, len, write);
--
2.33.0
From: Tom Rix <[email protected]>
[ Upstream commit 48d219f9cc667bc6fbc3e3af0b1bfd75db94fce4 ]
Static analysis reports this representative problem
tda1997x.c:1939: warning: 7th function call argument is an uninitialized
value
The 7th argument is buffer[0], which is set in the earlier call to
io_readn(). When io_readn() call to io_read() fails with the first
read, buffer[0] is not set and 0 is returned and stored in len.
The later call to hdmi_infoframe_unpack()'s size parameter is the
static size of buffer, always 40, so a short read is not caught
in hdmi_infoframe_unpacks()'s checking. The variable len should be
used instead.
Zero initialize buffer to 0 so it is in a known start state.
Fixes: 9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
Signed-off-by: Tom Rix <[email protected]>
Reviewed-by: Tim Harvey <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/tda1997x.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/tda1997x.c b/drivers/media/i2c/tda1997x.c
index 17cc69c3227f8..8476330964fc7 100644
--- a/drivers/media/i2c/tda1997x.c
+++ b/drivers/media/i2c/tda1997x.c
@@ -1247,13 +1247,13 @@ tda1997x_parse_infoframe(struct tda1997x_state *state, u16 addr)
{
struct v4l2_subdev *sd = &state->sd;
union hdmi_infoframe frame;
- u8 buffer[40];
+ u8 buffer[40] = { 0 };
u8 reg;
int len, err;
/* read data */
len = io_readn(sd, addr, sizeof(buffer), buffer);
- err = hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer));
+ err = hdmi_infoframe_unpack(&frame, buffer, len);
if (err) {
v4l_err(state->client,
"failed parsing %d byte infoframe: 0x%04x/0x%02x\n",
@@ -1927,13 +1927,13 @@ static int tda1997x_log_infoframe(struct v4l2_subdev *sd, int addr)
{
struct tda1997x_state *state = to_state(sd);
union hdmi_infoframe frame;
- u8 buffer[40];
+ u8 buffer[40] = { 0 };
int len, err;
/* read data */
len = io_readn(sd, addr, sizeof(buffer), buffer);
v4l2_dbg(1, debug, sd, "infoframe: addr=%d len=%d\n", addr, len);
- err = hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer));
+ err = hdmi_infoframe_unpack(&frame, buffer, len);
if (err) {
v4l_err(state->client,
"failed parsing %d byte infoframe: 0x%04x/0x%02x\n",
--
2.33.0
From: Michael Schmitz <[email protected]>
[ Upstream commit 86d46fdaa12ae5befc16b8d73fc85a3ca0399ea6 ]
Refactoring of the Atari floppy driver when converting to blk-mq
has broken the state machine in not-so-subtle ways:
finish_fdc() must be called when operations on the floppy device
have completed. This is crucial in order to relase the ST-DMA
lock, which protects against concurrent access to the ST-DMA
controller by other drivers (some DMA related, most just related
to device register access - broken beyond compare, I know).
When rewriting the driver's old do_request() function, the fact
that finish_fdc() was called only when all queued requests had
completed appears to have been overlooked. Instead, the new
request function calls finish_fdc() immediately after the last
request has been queued. finish_fdc() executes a dummy seek after
most requests, and this overwrites the state machine's interrupt
hander that was set up to wait for completion of the read/write
request just prior. To make matters worse, finish_fdc() is called
before device interrupts are re-enabled, making certain that the
read/write interupt is missed.
Shifting the finish_fdc() call into the read/write request
completion handler ensures the driver waits for the request to
actually complete. With a queue depth of 2, we won't see long
request sequences, so calling finish_fdc() unconditionally just
adds a little overhead for the dummy seeks, and keeps the code
simple.
While we're at it, kill ataflop_commit_rqs() which does nothing
but run finish_fdc() unconditionally, again likely wiping out an
in-flight request.
Signed-off-by: Michael Schmitz <[email protected]>
Fixes: 6ec3938cff95 ("ataflop: convert to blk-mq")
CC: [email protected]
CC: Tetsuo Handa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 3e881fdb06e0a..cd612cd04767a 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -653,9 +653,6 @@ static inline void copy_buffer(void *from, void *to)
*p2++ = *p1++;
}
-
-
-
/* General Interrupt Handling */
static void (*FloppyIRQHandler)( int status ) = NULL;
@@ -1225,6 +1222,7 @@ static void fd_rwsec_done1(int status)
}
else {
/* all sectors finished */
+ finish_fdc();
fd_end_request_cur(BLK_STS_OK);
}
return;
@@ -1472,15 +1470,6 @@ static void setup_req_params( int drive )
ReqTrack, ReqSector, (unsigned long)ReqData ));
}
-static void ataflop_commit_rqs(struct blk_mq_hw_ctx *hctx)
-{
- spin_lock_irq(&ataflop_lock);
- atari_disable_irq(IRQ_MFP_FDC);
- finish_fdc();
- atari_enable_irq(IRQ_MFP_FDC);
- spin_unlock_irq(&ataflop_lock);
-}
-
static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
@@ -1488,6 +1477,8 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
int drive = floppy - unit;
int type = floppy->type;
+ DPRINT(("Queue request: drive %d type %d last %d\n", drive, type, bd->last));
+
spin_lock_irq(&ataflop_lock);
if (fd_request) {
spin_unlock_irq(&ataflop_lock);
@@ -1547,8 +1538,6 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
setup_req_params( drive );
do_fd_action( drive );
- if (bd->last)
- finish_fdc();
atari_enable_irq( IRQ_MFP_FDC );
out:
@@ -1959,7 +1948,6 @@ static const struct block_device_operations floppy_fops = {
static const struct blk_mq_ops ataflop_mq_ops = {
.queue_rq = ataflop_queue_rq,
- .commit_rqs = ataflop_commit_rqs,
};
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit e4625044d656f3c33ece0cc9da22577bc10ca5d3 ]
Fix the build errors reported by the kernel test robot by
selecting V4L2_ASYNC:
mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove':
ths8200.c:(.text+0x1ec): undefined reference to `v4l2_async_unregister_subdev'
mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe':
ths8200.c:(.text+0x404): undefined reference to `v4l2_async_register_subdev'
Fixes: ed29f89497006 ("media: i2c: ths8200: support asynchronous probing")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 878f66ef2719f..5f5a3915ac778 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -595,6 +595,7 @@ config VIDEO_AK881X
config VIDEO_THS8200
tristate "Texas Instruments THS8200 video encoder"
depends on VIDEO_V4L2 && I2C
+ select V4L2_ASYNC
help
Support for the Texas Instruments THS8200 video encoder.
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit 2143ad413c05c7be24c3a92760e367b7f6aaac92 ]
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
Update the error handling path accordingly.
Fixes: 3003a180ef6b ("[media] VPU: mediatek: support Mediatek VPU")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Houlong Wei <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/mtk-vpu/mtk_vpu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c
index 36cb9b6131f7e..c62eb212cca92 100644
--- a/drivers/media/platform/mtk-vpu/mtk_vpu.c
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c
@@ -820,7 +820,8 @@ static int mtk_vpu_probe(struct platform_device *pdev)
vpu->wdt.wq = create_singlethread_workqueue("vpu_wdt");
if (!vpu->wdt.wq) {
dev_err(dev, "initialize wdt workqueue failed\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto clk_unprepare;
}
INIT_WORK(&vpu->wdt.ws, vpu_wdt_reset_func);
mutex_init(&vpu->vpu_mutex);
@@ -914,6 +915,8 @@ disable_vpu_clk:
vpu_clock_disable(vpu);
workqueue_destroy:
destroy_workqueue(vpu->wdt.wq);
+clk_unprepare:
+ clk_unprepare(vpu->clk);
return ret;
}
--
2.33.0
From: Ricardo Ribalda <[email protected]>
[ Upstream commit c87ed93574e3cd8346c05bd934c617596c12541b ]
If the driver does not implement s_ctrl, but it does implement
s_ext_ctrls, we convert the call.
When that happens we have also to convert back the response from
s_ext_ctrls.
Fixes v4l2_compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(411): returned control value out of range
fail: v4l2-test-controls.cpp(507): invalid control 00980900
test VIDIOC_G/S_CTRL: FAIL
Fixes: 35ea11ff8471 ("V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to v4l2-common.h or v4l2-ioctl.h")
Reviewed-by: Hans Verkuil <[email protected]>
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/v4l2-core/v4l2-ioctl.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 42958ce22de19..4ffa14e44efe4 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -2263,6 +2263,7 @@ static int v4l_s_ctrl(const struct v4l2_ioctl_ops *ops,
test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags) ? fh : NULL;
struct v4l2_ext_controls ctrls;
struct v4l2_ext_control ctrl;
+ int ret;
if (vfh && vfh->ctrl_handler)
return v4l2_s_ctrl(vfh, vfh->ctrl_handler, p);
@@ -2278,9 +2279,11 @@ static int v4l_s_ctrl(const struct v4l2_ioctl_ops *ops,
ctrls.controls = &ctrl;
ctrl.id = p->id;
ctrl.value = p->value;
- if (check_ext_ctrls(&ctrls, VIDIOC_S_CTRL))
- return ops->vidioc_s_ext_ctrls(file, fh, &ctrls);
- return -EINVAL;
+ if (!check_ext_ctrls(&ctrls, VIDIOC_S_CTRL))
+ return -EINVAL;
+ ret = ops->vidioc_s_ext_ctrls(file, fh, &ctrls);
+ p->value = ctrl.value;
+ return ret;
}
static int v4l_g_ext_ctrls(const struct v4l2_ioctl_ops *ops,
--
2.33.0
From: Colin Ian King <[email protected]>
[ Upstream commit 11b982e950d2138e90bd120501df10a439006ff8 ]
Currently the null pointer check on dvb_spi->vcc_supply is inverted and
this leads to only null values of the dvb_spi->vcc_supply being passed
to the call of regulator_disable causing null pointer dereferences.
Fix this by only calling regulator_disable if dvb_spi->vcc_supply is
not null.
Addresses-Coverity: ("Dereference after null check")
Fixes: dcb014582101 ("media: cxd2880-spi: Fix an error handling path")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/spi/cxd2880-spi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/spi/cxd2880-spi.c b/drivers/media/spi/cxd2880-spi.c
index 93194f03764d2..11273be702b6e 100644
--- a/drivers/media/spi/cxd2880-spi.c
+++ b/drivers/media/spi/cxd2880-spi.c
@@ -618,7 +618,7 @@ fail_frontend:
fail_attach:
dvb_unregister_adapter(&dvb_spi->adapter);
fail_adapter:
- if (!dvb_spi->vcc_supply)
+ if (dvb_spi->vcc_supply)
regulator_disable(dvb_spi->vcc_supply);
fail_regulator:
kfree(dvb_spi);
--
2.33.0
From: Pavel Skripkin <[email protected]>
[ Upstream commit afae4ef7d5ad913cab1316137854a36bea6268a5 ]
Syzbot reported ununit-value bug in az6027_rc_query(). The problem was
in missing state pointer initialization. Since this function does nothing
we can simply initialize state to REMOTE_NO_KEY_PRESSED.
Reported-and-tested-by: [email protected]
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/az6027.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c
index 1c39b61cde29b..86788771175b7 100644
--- a/drivers/media/usb/dvb-usb/az6027.c
+++ b/drivers/media/usb/dvb-usb/az6027.c
@@ -391,6 +391,7 @@ static struct rc_map_table rc_map_az6027_table[] = {
/* remote control stuff (does not work with my box) */
static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
+ *state = REMOTE_NO_KEY_PRESSED;
return 0;
}
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit 4853396f03c3019eccf5cd113e464231e9ddf0b3 ]
clang-14 complains about a sanity check that always passes when the
page size is 64KB or larger:
drivers/memstick/core/ms_block.c:1739:21: error: result of comparison of constant 65536 with expression of type 'unsigned short' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (msb->page_size > PAGE_SIZE) {
~~~~~~~~~~~~~~ ^ ~~~~~~~~~
This is fine, it will still work on all architectures, so just shut
up that warning with a cast.
Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memstick/core/ms_block.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c
index 8004dd64d09a8..bc1f484f50f1d 100644
--- a/drivers/memstick/core/ms_block.c
+++ b/drivers/memstick/core/ms_block.c
@@ -1727,7 +1727,7 @@ static int msb_init_card(struct memstick_dev *card)
msb->pages_in_block = boot_block->attr.block_size * 2;
msb->block_size = msb->page_size * msb->pages_in_block;
- if (msb->page_size > PAGE_SIZE) {
+ if ((size_t)msb->page_size > PAGE_SIZE) {
/* this isn't supported by linux at all, anyway*/
dbg("device page %d size isn't supported", msb->page_size);
return -EINVAL;
--
2.33.0
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit d81bfb41e30c42531536c5d2baa4d275a8309715 ]
Fix the following sparse warning in mt7615_mac_write_txwi routine:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:758:17:
warning: incorrect type in assignment
expected restricted __le32 [usertype]
got unsigned long
Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Fixes: d4bf77bd74930 ("mt76: mt7615: introduce mt7663u support to mt7615_write_txwi")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index f44f478bb970e..424be103093c6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -672,12 +672,15 @@ int mt7615_mac_write_txwi(struct mt7615_dev *dev, __le32 *txwi,
if (info->flags & IEEE80211_TX_CTL_NO_ACK)
txwi[3] |= cpu_to_le32(MT_TXD3_NO_ACK);
- txwi[7] = FIELD_PREP(MT_TXD7_TYPE, fc_type) |
- FIELD_PREP(MT_TXD7_SUB_TYPE, fc_stype) |
- FIELD_PREP(MT_TXD7_SPE_IDX, 0x18);
- if (!is_mmio)
- txwi[8] = FIELD_PREP(MT_TXD8_L_TYPE, fc_type) |
- FIELD_PREP(MT_TXD8_L_SUB_TYPE, fc_stype);
+ val = FIELD_PREP(MT_TXD7_TYPE, fc_type) |
+ FIELD_PREP(MT_TXD7_SUB_TYPE, fc_stype) |
+ FIELD_PREP(MT_TXD7_SPE_IDX, 0x18);
+ txwi[7] = cpu_to_le32(val);
+ if (!is_mmio) {
+ val = FIELD_PREP(MT_TXD8_L_TYPE, fc_type) |
+ FIELD_PREP(MT_TXD8_L_SUB_TYPE, fc_stype);
+ txwi[8] = cpu_to_le32(val);
+ }
return 0;
}
--
2.33.0
From: Tim Gardner <[email protected]>
[ Upstream commit cd4bc63de774eee95e9bac26a565cd80e0fca421 ]
Coverity complains of a possible dereference of a null return value.
5. returned_null: kzalloc returns NULL. [show details]
6. var_assigned: Assigning: si_data = NULL return value from kzalloc.
488 si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
489 cbd.length = cpu_to_le16(data_size);
490
491 dma = dma_map_single(&priv->si->pdev->dev, si_data,
492 data_size, DMA_FROM_DEVICE);
While this kzalloc() is unlikely to fail, I did notice that the function
returned without unmapping si_data.
Fix this by refactoring the error paths and checking for kzalloc()
failure.
Fixes: 888ae5a3952ba ("net: enetc: add tc flower psfp offload driver")
Cc: Claudiu Manoil <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: [email protected]
Cc: [email protected] (open list)
Signed-off-by: Tim Gardner <[email protected]>
Acked-by: Claudiu Manoil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/freescale/enetc/enetc_qos.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
index dbceb99c4441a..9e6988fd3787a 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
@@ -486,14 +486,16 @@ static int enetc_streamid_hw_set(struct enetc_ndev_priv *priv,
data_size = sizeof(struct streamid_data);
si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
+ if (!si_data)
+ return -ENOMEM;
cbd.length = cpu_to_le16(data_size);
dma = dma_map_single(&priv->si->pdev->dev, si_data,
data_size, DMA_FROM_DEVICE);
if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
netdev_err(priv->si->ndev, "DMA mapping failed!\n");
- kfree(si_data);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto out;
}
cbd.addr[0] = lower_32_bits(dma);
@@ -513,12 +515,10 @@ static int enetc_streamid_hw_set(struct enetc_ndev_priv *priv,
err = enetc_send_cmd(priv->si, &cbd);
if (err)
- return -EINVAL;
+ goto out;
- if (!enable) {
- kfree(si_data);
- return 0;
- }
+ if (!enable)
+ goto out;
/* Enable the entry overwrite again incase space flushed by hardware */
memset(&cbd, 0, sizeof(cbd));
@@ -563,6 +563,10 @@ static int enetc_streamid_hw_set(struct enetc_ndev_priv *priv,
}
err = enetc_send_cmd(priv->si, &cbd);
+out:
+ if (!dma_mapping_error(&priv->si->pdev->dev, dma))
+ dma_unmap_single(&priv->si->pdev->dev, dma, data_size, DMA_FROM_DEVICE);
+
kfree(si_data);
return err;
--
2.33.0
From: Ziyang Xuan <[email protected]>
[ Upstream commit 515e7184bdf0a3ebf1757cc77fb046b4fe282189 ]
When fail to init coex module, free 'common' and 'adapter' directly, but
common->tx_thread which will access 'common' and 'adapter' is running at
the same time. That will trigger the UAF bug.
==================================================================
BUG: KASAN: use-after-free in rsi_tx_scheduler_thread+0x50f/0x520 [rsi_91x]
Read of size 8 at addr ffff8880076dc000 by task Tx-Thread/124777
CPU: 0 PID: 124777 Comm: Tx-Thread Not tainted 5.15.0-rc5+ #19
Call Trace:
dump_stack_lvl+0xe2/0x152
print_address_description.constprop.0+0x21/0x140
? rsi_tx_scheduler_thread+0x50f/0x520
kasan_report.cold+0x7f/0x11b
? rsi_tx_scheduler_thread+0x50f/0x520
rsi_tx_scheduler_thread+0x50f/0x520
...
Freed by task 111873:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x109/0x140
kfree+0x117/0x4c0
rsi_91x_init+0x741/0x8a0 [rsi_91x]
rsi_probe+0x9f/0x1750 [rsi_usb]
Stop thread before free 'common' and 'adapter' to fix it.
Fixes: 2108df3c4b18 ("rsi: add coex support")
Signed-off-by: Ziyang Xuan <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 0a2f8b4f447bd..8c638cfeac52f 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -369,6 +369,7 @@ struct rsi_hw *rsi_91x_init(u16 oper_mode)
if (common->coex_mode > 1) {
if (rsi_coex_attach(common)) {
rsi_dbg(ERR_ZONE, "Failed to init coex module\n");
+ rsi_kill_thread(&common->tx_thread);
goto err;
}
}
--
2.33.0
From: Jim Mattson <[email protected]>
[ Upstream commit ed290e1c20da19fa100a3e0f421aa31b65984960 ]
Though gcc conveniently compiles a simple memset to "rep stos," clang
prefers to call the libc version of memset. If a test is dynamically
linked, the libc memset isn't available in L1 (nor is the PLT or the
GOT, for that matter). Even if the test is statically linked, the libc
memset may choose to use some CPU features, like AVX, which may not be
enabled in L1. Note that __builtin_memset doesn't solve the problem,
because (a) the compiler is free to call memset anyway, and (b)
__builtin_memset may also choose to use features like AVX, which may
not be available in L1.
To avoid a myriad of problems, use an explicit "rep stos" to clear the
VMCB in generic_svm_setup(), which is called both from L0 and L1.
Reported-by: Ricardo Koller <[email protected]>
Signed-off-by: Jim Mattson <[email protected]>
Fixes: 20ba262f8631a ("selftests: KVM: AMD Nested test infrastructure")
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kvm/lib/x86_64/svm.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kvm/lib/x86_64/svm.c b/tools/testing/selftests/kvm/lib/x86_64/svm.c
index 827fe6028dd42..a58507a7b5d6d 100644
--- a/tools/testing/selftests/kvm/lib/x86_64/svm.c
+++ b/tools/testing/selftests/kvm/lib/x86_64/svm.c
@@ -57,6 +57,18 @@ static void vmcb_set_seg(struct vmcb_seg *seg, u16 selector,
seg->base = base;
}
+/*
+ * Avoid using memset to clear the vmcb, since libc may not be
+ * available in L1 (and, even if it is, features that libc memset may
+ * want to use, like AVX, may not be enabled).
+ */
+static void clear_vmcb(struct vmcb *vmcb)
+{
+ int n = sizeof(*vmcb) / sizeof(u32);
+
+ asm volatile ("rep stosl" : "+c"(n), "+D"(vmcb) : "a"(0) : "memory");
+}
+
void generic_svm_setup(struct svm_test_data *svm, void *guest_rip, void *guest_rsp)
{
struct vmcb *vmcb = svm->vmcb;
@@ -73,7 +85,7 @@ void generic_svm_setup(struct svm_test_data *svm, void *guest_rip, void *guest_r
wrmsr(MSR_EFER, efer | EFER_SVME);
wrmsr(MSR_VM_HSAVE_PA, svm->save_area_gpa);
- memset(vmcb, 0, sizeof(*vmcb));
+ clear_vmcb(vmcb);
asm volatile ("vmsave %0\n\t" : : "a" (vmcb_gpa) : "memory");
vmcb_set_seg(&save->es, get_es(), 0, -1U, data_seg_attr);
vmcb_set_seg(&save->cs, get_cs(), 0, -1U, code_seg_attr);
--
2.33.0
From: Quentin Monnet <[email protected]>
[ Upstream commit e89ef634f81c9d90e1824ab183721f3b361472e6 ]
Bpftool creates a new JSON object for writing program metadata in plain
text mode, regardless of metadata being present or not. Then this writer
is freed if any metadata has been found and printed, but it leaks
otherwise. We cannot destroy the object unconditionally, because the
destructor prints an undesirable line break. Instead, make sure the
writer is created only after we have found program metadata to print.
Found with valgrind.
Fixes: aff52e685eb3 ("bpftool: Support dumping metadata")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/prog.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 14237ffb90bae..592536904dde2 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -304,18 +304,12 @@ static void show_prog_metadata(int fd, __u32 num_maps)
if (printed_header)
jsonw_end_object(json_wtr);
} else {
- json_writer_t *btf_wtr = jsonw_new(stdout);
+ json_writer_t *btf_wtr;
struct btf_dumper d = {
.btf = btf,
- .jw = btf_wtr,
.is_plain_text = true,
};
- if (!btf_wtr) {
- p_err("jsonw alloc failed");
- goto out_free;
- }
-
for (i = 0; i < vlen; i++, vsi++) {
t_var = btf__type_by_id(btf, vsi->type);
name = btf__name_by_offset(btf, t_var->name_off);
@@ -325,6 +319,14 @@ static void show_prog_metadata(int fd, __u32 num_maps)
if (!printed_header) {
printf("\tmetadata:");
+
+ btf_wtr = jsonw_new(stdout);
+ if (!btf_wtr) {
+ p_err("jsonw alloc failed");
+ goto out_free;
+ }
+ d.jw = btf_wtr,
+
printed_header = true;
}
--
2.33.0
From: Ricardo Koller <[email protected]>
[ Upstream commit 47bc726fe8d1910872dc3d7e7ec70f8b9e6043b7 ]
Building the KVM selftests with LLVM's integrated assembler fails with:
$ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang
lib/x86_64/svm.c:77:16: error: too few operands for instruction
asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory");
^
<inline asm>:1:2: note: instantiated into assembly here
vmsave
^
lib/x86_64/svm.c:134:3: error: too few operands for instruction
"vmload\n\t"
^
<inline asm>:1:2: note: instantiated into assembly here
vmload
^
This is because LLVM IAS does not currently support calling vmsave,
vmload, or vmload without an explicit %rax operand.
Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing
this was suggested by Sean Christopherson.
Tested: building without this error in clang 11. The following patch
(not queued yet) needs to be applied to solve the other remaining error:
"selftests: kvm: remove reassignment of non-absolute variables".
Suggested-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/kvm/[email protected]/
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kvm/lib/x86_64/svm.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/kvm/lib/x86_64/svm.c b/tools/testing/selftests/kvm/lib/x86_64/svm.c
index 3a5c72ed2b792..827fe6028dd42 100644
--- a/tools/testing/selftests/kvm/lib/x86_64/svm.c
+++ b/tools/testing/selftests/kvm/lib/x86_64/svm.c
@@ -74,7 +74,7 @@ void generic_svm_setup(struct svm_test_data *svm, void *guest_rip, void *guest_r
wrmsr(MSR_VM_HSAVE_PA, svm->save_area_gpa);
memset(vmcb, 0, sizeof(*vmcb));
- asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory");
+ asm volatile ("vmsave %0\n\t" : : "a" (vmcb_gpa) : "memory");
vmcb_set_seg(&save->es, get_es(), 0, -1U, data_seg_attr);
vmcb_set_seg(&save->cs, get_cs(), 0, -1U, code_seg_attr);
vmcb_set_seg(&save->ss, get_ss(), 0, -1U, data_seg_attr);
@@ -131,19 +131,19 @@ void generic_svm_setup(struct svm_test_data *svm, void *guest_rip, void *guest_r
void run_guest(struct vmcb *vmcb, uint64_t vmcb_gpa)
{
asm volatile (
- "vmload\n\t"
+ "vmload %[vmcb_gpa]\n\t"
"mov rflags, %%r15\n\t" // rflags
"mov %%r15, 0x170(%[vmcb])\n\t"
"mov guest_regs, %%r15\n\t" // rax
"mov %%r15, 0x1f8(%[vmcb])\n\t"
LOAD_GPR_C
- "vmrun\n\t"
+ "vmrun %[vmcb_gpa]\n\t"
SAVE_GPR_C
"mov 0x170(%[vmcb]), %%r15\n\t" // rflags
"mov %%r15, rflags\n\t"
"mov 0x1f8(%[vmcb]), %%r15\n\t" // rax
"mov %%r15, guest_regs\n\t"
- "vmsave\n\t"
+ "vmsave %[vmcb_gpa]\n\t"
: : [vmcb] "r" (vmcb), [vmcb_gpa] "a" (vmcb_gpa)
: "r15", "memory");
}
--
2.33.0
From: Jonas Dreßler <[email protected]>
[ Upstream commit cc8a8bc37466f79b24d972555237f3d591150602 ]
While looking at on-air packets using Wireshark, I noticed we're never
setting the initiator bit when sending DELBA requests to the AP: While
we set the bit on our del_ba_param_set bitmask, we forget to actually
copy that bitmask over to the command struct, which means we never
actually set the initiator bit.
Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command
struct.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jonas Dreßler <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/11n.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c
index 6696bce561786..cf08a4af84d6d 100644
--- a/drivers/net/wireless/marvell/mwifiex/11n.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n.c
@@ -657,14 +657,15 @@ int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac,
uint16_t del_ba_param_set;
memset(&delba, 0, sizeof(delba));
- delba.del_ba_param_set = cpu_to_le16(tid << DELBA_TID_POS);
- del_ba_param_set = le16_to_cpu(delba.del_ba_param_set);
+ del_ba_param_set = tid << DELBA_TID_POS;
+
if (initiator)
del_ba_param_set |= IEEE80211_DELBA_PARAM_INITIATOR_MASK;
else
del_ba_param_set &= ~IEEE80211_DELBA_PARAM_INITIATOR_MASK;
+ delba.del_ba_param_set = cpu_to_le16(del_ba_param_set);
memcpy(&delba.peer_mac_addr, peer_mac, ETH_ALEN);
/* We don't wait for the response of this command */
--
2.33.0
From: Sven Eckelmann <[email protected]>
[ Upstream commit 0a491167fe0cf9f26062462de2a8688b96125d48 ]
Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB
steps). This isn't the case for max_antenna_gain - which is still expected
by the firmware as dB.
The firmware is converting it from dB to the internal (twicepower)
representation when it calculates the limits of a channel. This can be seen
in tpc_stats when configuring "12" as max_antenna_gain. Instead of the
expected 12 (6 dB), the tpc_stats shows 24 (12 dB).
Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057.
Fixes: 02256930d9b8 ("ath10k: use proper tx power unit")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 6 +++---
drivers/net/wireless/ath/ath10k/wmi.h | 3 +++
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 90dc48f66fbfe..c42977918e049 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1041,7 +1041,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
arg.channel.min_power = 0;
arg.channel.max_power = channel->max_power * 2;
arg.channel.max_reg_power = channel->max_reg_power * 2;
- arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
+ arg.channel.max_antenna_gain = channel->max_antenna_gain;
reinit_completion(&ar->vdev_setup_done);
reinit_completion(&ar->vdev_delete_done);
@@ -1487,7 +1487,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif,
arg.channel.min_power = 0;
arg.channel.max_power = chandef->chan->max_power * 2;
arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
- arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
+ arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain;
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
arg.ssid = arvif->u.ap.ssid;
@@ -3258,7 +3258,7 @@ static int ath10k_update_channel_list(struct ath10k *ar)
ch->min_power = 0;
ch->max_power = channel->max_power * 2;
ch->max_reg_power = channel->max_reg_power * 2;
- ch->max_antenna_gain = channel->max_antenna_gain * 2;
+ ch->max_antenna_gain = channel->max_antenna_gain;
ch->reg_class_id = 0; /* FIXME */
/* FIXME: why use only legacy modes, why not any
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 66ecf09068c19..e244b7038e606 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2066,7 +2066,9 @@ struct wmi_channel {
union {
__le32 reginfo1;
struct {
+ /* note: power unit is 1 dBm */
u8 antenna_max;
+ /* note: power unit is 0.5 dBm */
u8 max_tx_power;
} __packed;
} __packed;
@@ -2086,6 +2088,7 @@ struct wmi_channel_arg {
u32 min_power;
u32 max_power;
u32 max_reg_power;
+ /* note: power unit is 1 dBm */
u32 max_antenna_gain;
u32 reg_class_id;
enum wmi_phy_mode mode;
--
2.33.0
From: Andrii Nakryiko <[email protected]>
[ Upstream commit d8123624506cd62730c9cd9c7672c698e462703d ]
Make data section layout checks stricter, disallowing overlap of types and
strings data.
Additionally, allow BTFs with no type data. There is nothing inherently wrong
with having BTF with no types (put potentially with some strings). This could
be a situation with kernel module BTFs, if module doesn't introduce any new
type information.
Also fix invalid offset alignment check for btf->hdr->type_off.
Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index 231b07203e3d2..987c1515b828b 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -215,22 +215,18 @@ static int btf_parse_hdr(struct btf *btf)
return -EINVAL;
}
- if (meta_left < hdr->type_off) {
- pr_debug("Invalid BTF type section offset:%u\n", hdr->type_off);
+ if (meta_left < hdr->str_off + hdr->str_len) {
+ pr_debug("Invalid BTF total size:%u\n", btf->raw_size);
return -EINVAL;
}
- if (meta_left < hdr->str_off) {
- pr_debug("Invalid BTF string section offset:%u\n", hdr->str_off);
+ if (hdr->type_off + hdr->type_len > hdr->str_off) {
+ pr_debug("Invalid BTF data sections layout: type data at %u + %u, strings data at %u + %u\n",
+ hdr->type_off, hdr->type_len, hdr->str_off, hdr->str_len);
return -EINVAL;
}
- if (hdr->type_off >= hdr->str_off) {
- pr_debug("BTF type section offset >= string section offset. No type?\n");
- return -EINVAL;
- }
-
- if (hdr->type_off & 0x02) {
+ if (hdr->type_off % 4) {
pr_debug("BTF type section is not aligned to 4 bytes\n");
return -EINVAL;
}
--
2.33.0
From: Tetsuo Handa <[email protected]>
[ Upstream commit 0934ad42bb2c5df90a1b9de690f93de735b622fe ]
syzbot is reporting UAF at cipso_v4_doi_search() [1], for smk_cipso_doi()
is calling kfree() without removing from the cipso_v4_doi_list list after
netlbl_cfg_cipsov4_map_add() returned an error. We need to use
netlbl_cfg_cipsov4_del() in order to remove from the list and wait for
RCU grace period before kfree().
Link: https://syzkaller.appspot.com/bug?extid=93dba5b91f0fed312cbd [1]
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Fixes: 6c2e8ac0953fccdd ("netlabel: Update kernel configuration API")
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smackfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index ca0daba11f814..3eabcc469669e 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -712,7 +712,7 @@ static void smk_cipso_doi(void)
if (rc != 0) {
printk(KERN_WARNING "%s:%d map add rc = %d\n",
__func__, __LINE__, rc);
- kfree(doip);
+ netlbl_cfg_cipsov4_del(doip->doi, &nai);
return;
}
}
--
2.33.0
From: Janis Schoetterl-Glausch <[email protected]>
[ Upstream commit 85f517b29418158d3e6e90c3f0fc01b306d2f1a1 ]
If handle_sske cannot set the storage key, because there is no
page table entry or no present large page entry, it calls
fixup_user_fault.
However, currently, if the call succeeds, handle_sske returns
-EAGAIN, without having set the storage key.
Instead, retry by continue'ing the loop without incrementing the
address.
The same issue in handle_pfmf was fixed by
a11bdb1a6b78 ("KVM: s390: Fix pfmf and conditional skey emulation").
Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Reviewed-by: Claudio Imbrenda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kvm/priv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index cd74989ce0b02..3b1a498e58d25 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -397,6 +397,8 @@ static int handle_sske(struct kvm_vcpu *vcpu)
mmap_read_unlock(current->mm);
if (rc == -EFAULT)
return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+ if (rc == -EAGAIN)
+ continue;
if (rc < 0)
return rc;
start += PAGE_SIZE;
--
2.33.0
From: Anders Roxell <[email protected]>
[ Upstream commit 01de5fcd8b1ac0ca28d2bb0921226a54fdd62684 ]
When building the kernel with sparse enabled 'C=1' the following
warnings shows up:
kernel/power/swap.c:390:29: warning: incorrect type in assignment (different base types)
kernel/power/swap.c:390:29: expected int ret
kernel/power/swap.c:390:29: got restricted blk_status_t
This is due to function hib_wait_io() returns a 'blk_status_t' which is
a bitwise u8. Commit 5416da01ff6e ("PM: hibernate: Remove
blk_status_to_errno in hib_wait_io") seemed to have mixed up the return
type. However, the 4e4cbee93d56 ("block: switch bios to blk_status_t")
actually broke the behaviour by returning the wrong type.
Rework so function hib_wait_io() returns a 'int' instead of
'blk_status_t' and make sure to call function
blk_status_to_errno(hb->error)' when returning from function
hib_wait_io() a int gets returned.
Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t")
Fixes: 5416da01ff6e ("PM: hibernate: Remove blk_status_to_errno in hib_wait_io")
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/power/swap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index c9126606fa6f4..25e7cb96bb884 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -299,7 +299,7 @@ static int hib_submit_io(int op, int op_flags, pgoff_t page_off, void *addr,
return error;
}
-static blk_status_t hib_wait_io(struct hib_bio_batch *hb)
+static int hib_wait_io(struct hib_bio_batch *hb)
{
/*
* We are relying on the behavior of blk_plug that a thread with
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit b6816441a14bbe356ba8590de79cfea2de6a085c ]
The msm_iommu_new() returns error pointers on failure so check for that
to avoid an Oops.
Fixes: ccac7ce373c1 ("drm/msm: Refactor address space initialization")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/20211004103806.GD25015@kili
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index c8217f4858a15..b4a2e8eb35dd2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -846,6 +846,10 @@ static int _dpu_kms_mmu_init(struct dpu_kms *dpu_kms)
return 0;
mmu = msm_iommu_new(dpu_kms->dev->dev, domain);
+ if (IS_ERR(mmu)) {
+ iommu_domain_free(domain);
+ return PTR_ERR(mmu);
+ }
aspace = msm_gem_address_space_create(mmu, "dpu1",
0x1000, 0x100000000 - 0x1000);
--
2.33.0
From: Lorenz Bauer <[email protected]>
[ Upstream commit 509b2937bce90089fd2785db9f27951a3d850c34 ]
Convert the selftests for sk_lookup narrow context access to use
PROG_TEST_RUN instead of creating actual sockets. This ensures that
ctx is populated correctly when using PROG_TEST_RUN.
Assert concrete values since we now control remote_ip and remote_port.
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../selftests/bpf/prog_tests/sk_lookup.c | 83 +++++++++++++++----
.../selftests/bpf/progs/test_sk_lookup.c | 62 +++++++++-----
2 files changed, 109 insertions(+), 36 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/sk_lookup.c b/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
index 9ff0412e1fd38..45c82db3c58c5 100644
--- a/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
+++ b/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
@@ -241,6 +241,48 @@ fail:
return -1;
}
+static __u64 socket_cookie(int fd)
+{
+ __u64 cookie;
+ socklen_t cookie_len = sizeof(cookie);
+
+ if (CHECK(getsockopt(fd, SOL_SOCKET, SO_COOKIE, &cookie, &cookie_len) < 0,
+ "getsockopt(SO_COOKIE)", "%s\n", strerror(errno)))
+ return 0;
+ return cookie;
+}
+
+static int fill_sk_lookup_ctx(struct bpf_sk_lookup *ctx, const char *local_ip, __u16 local_port,
+ const char *remote_ip, __u16 remote_port)
+{
+ void *local, *remote;
+ int err;
+
+ memset(ctx, 0, sizeof(*ctx));
+ ctx->local_port = local_port;
+ ctx->remote_port = htons(remote_port);
+
+ if (is_ipv6(local_ip)) {
+ ctx->family = AF_INET6;
+ local = &ctx->local_ip6[0];
+ remote = &ctx->remote_ip6[0];
+ } else {
+ ctx->family = AF_INET;
+ local = &ctx->local_ip4;
+ remote = &ctx->remote_ip4;
+ }
+
+ err = inet_pton(ctx->family, local_ip, local);
+ if (CHECK(err != 1, "inet_pton", "local_ip failed\n"))
+ return 1;
+
+ err = inet_pton(ctx->family, remote_ip, remote);
+ if (CHECK(err != 1, "inet_pton", "remote_ip failed\n"))
+ return 1;
+
+ return 0;
+}
+
static int send_byte(int fd)
{
ssize_t n;
@@ -1009,18 +1051,27 @@ static void test_drop_on_reuseport(struct test_sk_lookup *skel)
static void run_sk_assign(struct test_sk_lookup *skel,
struct bpf_program *lookup_prog,
- const char *listen_ip, const char *connect_ip)
+ const char *remote_ip, const char *local_ip)
{
- int client_fd, peer_fd, server_fds[MAX_SERVERS] = { -1 };
- struct bpf_link *lookup_link;
+ int server_fds[MAX_SERVERS] = { -1 };
+ struct bpf_sk_lookup ctx;
+ __u64 server_cookie;
int i, err;
- lookup_link = attach_lookup_prog(lookup_prog);
- if (!lookup_link)
+ DECLARE_LIBBPF_OPTS(bpf_test_run_opts, opts,
+ .ctx_in = &ctx,
+ .ctx_size_in = sizeof(ctx),
+ .ctx_out = &ctx,
+ .ctx_size_out = sizeof(ctx),
+ );
+
+ if (fill_sk_lookup_ctx(&ctx, local_ip, EXT_PORT, remote_ip, INT_PORT))
return;
+ ctx.protocol = IPPROTO_TCP;
+
for (i = 0; i < ARRAY_SIZE(server_fds); i++) {
- server_fds[i] = make_server(SOCK_STREAM, listen_ip, 0, NULL);
+ server_fds[i] = make_server(SOCK_STREAM, local_ip, 0, NULL);
if (server_fds[i] < 0)
goto close_servers;
@@ -1030,23 +1081,25 @@ static void run_sk_assign(struct test_sk_lookup *skel,
goto close_servers;
}
- client_fd = make_client(SOCK_STREAM, connect_ip, EXT_PORT);
- if (client_fd < 0)
+ server_cookie = socket_cookie(server_fds[SERVER_B]);
+ if (!server_cookie)
+ return;
+
+ err = bpf_prog_test_run_opts(bpf_program__fd(lookup_prog), &opts);
+ if (CHECK(err, "test_run", "failed with error %d\n", errno))
+ goto close_servers;
+
+ if (CHECK(ctx.cookie == 0, "ctx.cookie", "no socket selected\n"))
goto close_servers;
- peer_fd = accept(server_fds[SERVER_B], NULL, NULL);
- if (CHECK(peer_fd < 0, "accept", "failed\n"))
- goto close_client;
+ CHECK(ctx.cookie != server_cookie, "ctx.cookie",
+ "selected sk %llu instead of %llu\n", ctx.cookie, server_cookie);
- close(peer_fd);
-close_client:
- close(client_fd);
close_servers:
for (i = 0; i < ARRAY_SIZE(server_fds); i++) {
if (server_fds[i] != -1)
close(server_fds[i]);
}
- bpf_link__destroy(lookup_link);
}
static void run_sk_assign_v4(struct test_sk_lookup *skel,
diff --git a/tools/testing/selftests/bpf/progs/test_sk_lookup.c b/tools/testing/selftests/bpf/progs/test_sk_lookup.c
index 1032b292af5b7..ac6f7f205e25d 100644
--- a/tools/testing/selftests/bpf/progs/test_sk_lookup.c
+++ b/tools/testing/selftests/bpf/progs/test_sk_lookup.c
@@ -64,6 +64,10 @@ static const int PROG_DONE = 1;
static const __u32 KEY_SERVER_A = SERVER_A;
static const __u32 KEY_SERVER_B = SERVER_B;
+static const __u16 SRC_PORT = bpf_htons(8008);
+static const __u32 SRC_IP4 = IP4(127, 0, 0, 2);
+static const __u32 SRC_IP6[] = IP6(0xfd000000, 0x0, 0x0, 0x00000002);
+
static const __u16 DST_PORT = 7007; /* Host byte order */
static const __u32 DST_IP4 = IP4(127, 0, 0, 1);
static const __u32 DST_IP6[] = IP6(0xfd000000, 0x0, 0x0, 0x00000001);
@@ -398,11 +402,12 @@ int ctx_narrow_access(struct bpf_sk_lookup *ctx)
if (LSW(ctx->protocol, 0) != IPPROTO_TCP)
return SK_DROP;
- /* Narrow loads from remote_port field. Expect non-0 value. */
- if (LSB(ctx->remote_port, 0) == 0 && LSB(ctx->remote_port, 1) == 0 &&
- LSB(ctx->remote_port, 2) == 0 && LSB(ctx->remote_port, 3) == 0)
+ /* Narrow loads from remote_port field. Expect SRC_PORT. */
+ if (LSB(ctx->remote_port, 0) != ((SRC_PORT >> 0) & 0xff) ||
+ LSB(ctx->remote_port, 1) != ((SRC_PORT >> 8) & 0xff) ||
+ LSB(ctx->remote_port, 2) != 0 || LSB(ctx->remote_port, 3) != 0)
return SK_DROP;
- if (LSW(ctx->remote_port, 0) == 0)
+ if (LSW(ctx->remote_port, 0) != SRC_PORT)
return SK_DROP;
/* Narrow loads from local_port field. Expect DST_PORT. */
@@ -415,11 +420,14 @@ int ctx_narrow_access(struct bpf_sk_lookup *ctx)
/* Narrow loads from IPv4 fields */
if (v4) {
- /* Expect non-0.0.0.0 in remote_ip4 */
- if (LSB(ctx->remote_ip4, 0) == 0 && LSB(ctx->remote_ip4, 1) == 0 &&
- LSB(ctx->remote_ip4, 2) == 0 && LSB(ctx->remote_ip4, 3) == 0)
+ /* Expect SRC_IP4 in remote_ip4 */
+ if (LSB(ctx->remote_ip4, 0) != ((SRC_IP4 >> 0) & 0xff) ||
+ LSB(ctx->remote_ip4, 1) != ((SRC_IP4 >> 8) & 0xff) ||
+ LSB(ctx->remote_ip4, 2) != ((SRC_IP4 >> 16) & 0xff) ||
+ LSB(ctx->remote_ip4, 3) != ((SRC_IP4 >> 24) & 0xff))
return SK_DROP;
- if (LSW(ctx->remote_ip4, 0) == 0 && LSW(ctx->remote_ip4, 1) == 0)
+ if (LSW(ctx->remote_ip4, 0) != ((SRC_IP4 >> 0) & 0xffff) ||
+ LSW(ctx->remote_ip4, 1) != ((SRC_IP4 >> 16) & 0xffff))
return SK_DROP;
/* Expect DST_IP4 in local_ip4 */
@@ -448,20 +456,32 @@ int ctx_narrow_access(struct bpf_sk_lookup *ctx)
/* Narrow loads from IPv6 fields */
if (!v4) {
- /* Expect non-:: IP in remote_ip6 */
- if (LSB(ctx->remote_ip6[0], 0) == 0 && LSB(ctx->remote_ip6[0], 1) == 0 &&
- LSB(ctx->remote_ip6[0], 2) == 0 && LSB(ctx->remote_ip6[0], 3) == 0 &&
- LSB(ctx->remote_ip6[1], 0) == 0 && LSB(ctx->remote_ip6[1], 1) == 0 &&
- LSB(ctx->remote_ip6[1], 2) == 0 && LSB(ctx->remote_ip6[1], 3) == 0 &&
- LSB(ctx->remote_ip6[2], 0) == 0 && LSB(ctx->remote_ip6[2], 1) == 0 &&
- LSB(ctx->remote_ip6[2], 2) == 0 && LSB(ctx->remote_ip6[2], 3) == 0 &&
- LSB(ctx->remote_ip6[3], 0) == 0 && LSB(ctx->remote_ip6[3], 1) == 0 &&
- LSB(ctx->remote_ip6[3], 2) == 0 && LSB(ctx->remote_ip6[3], 3) == 0)
+ /* Expect SRC_IP6 in remote_ip6 */
+ if (LSB(ctx->remote_ip6[0], 0) != ((SRC_IP6[0] >> 0) & 0xff) ||
+ LSB(ctx->remote_ip6[0], 1) != ((SRC_IP6[0] >> 8) & 0xff) ||
+ LSB(ctx->remote_ip6[0], 2) != ((SRC_IP6[0] >> 16) & 0xff) ||
+ LSB(ctx->remote_ip6[0], 3) != ((SRC_IP6[0] >> 24) & 0xff) ||
+ LSB(ctx->remote_ip6[1], 0) != ((SRC_IP6[1] >> 0) & 0xff) ||
+ LSB(ctx->remote_ip6[1], 1) != ((SRC_IP6[1] >> 8) & 0xff) ||
+ LSB(ctx->remote_ip6[1], 2) != ((SRC_IP6[1] >> 16) & 0xff) ||
+ LSB(ctx->remote_ip6[1], 3) != ((SRC_IP6[1] >> 24) & 0xff) ||
+ LSB(ctx->remote_ip6[2], 0) != ((SRC_IP6[2] >> 0) & 0xff) ||
+ LSB(ctx->remote_ip6[2], 1) != ((SRC_IP6[2] >> 8) & 0xff) ||
+ LSB(ctx->remote_ip6[2], 2) != ((SRC_IP6[2] >> 16) & 0xff) ||
+ LSB(ctx->remote_ip6[2], 3) != ((SRC_IP6[2] >> 24) & 0xff) ||
+ LSB(ctx->remote_ip6[3], 0) != ((SRC_IP6[3] >> 0) & 0xff) ||
+ LSB(ctx->remote_ip6[3], 1) != ((SRC_IP6[3] >> 8) & 0xff) ||
+ LSB(ctx->remote_ip6[3], 2) != ((SRC_IP6[3] >> 16) & 0xff) ||
+ LSB(ctx->remote_ip6[3], 3) != ((SRC_IP6[3] >> 24) & 0xff))
return SK_DROP;
- if (LSW(ctx->remote_ip6[0], 0) == 0 && LSW(ctx->remote_ip6[0], 1) == 0 &&
- LSW(ctx->remote_ip6[1], 0) == 0 && LSW(ctx->remote_ip6[1], 1) == 0 &&
- LSW(ctx->remote_ip6[2], 0) == 0 && LSW(ctx->remote_ip6[2], 1) == 0 &&
- LSW(ctx->remote_ip6[3], 0) == 0 && LSW(ctx->remote_ip6[3], 1) == 0)
+ if (LSW(ctx->remote_ip6[0], 0) != ((SRC_IP6[0] >> 0) & 0xffff) ||
+ LSW(ctx->remote_ip6[0], 1) != ((SRC_IP6[0] >> 16) & 0xffff) ||
+ LSW(ctx->remote_ip6[1], 0) != ((SRC_IP6[1] >> 0) & 0xffff) ||
+ LSW(ctx->remote_ip6[1], 1) != ((SRC_IP6[1] >> 16) & 0xffff) ||
+ LSW(ctx->remote_ip6[2], 0) != ((SRC_IP6[2] >> 0) & 0xffff) ||
+ LSW(ctx->remote_ip6[2], 1) != ((SRC_IP6[2] >> 16) & 0xffff) ||
+ LSW(ctx->remote_ip6[3], 0) != ((SRC_IP6[3] >> 0) & 0xffff) ||
+ LSW(ctx->remote_ip6[3], 1) != ((SRC_IP6[3] >> 16) & 0xffff))
return SK_DROP;
/* Expect DST_IP6 in local_ip6 */
if (LSB(ctx->local_ip6[0], 0) != ((DST_IP6[0] >> 0) & 0xff) ||
--
2.33.0
From: Benjamin Li <[email protected]>
[ Upstream commit 9bfe38e064af5decba2ffce66a2958ab8b10eaa4 ]
This is essentially exactly following the dma_wmb()/dma_rmb() usage
instructions in Documentation/memory-barriers.txt.
The theoretical races here are:
1. DXE (the DMA Transfer Engine in the Wi-Fi subsystem) seeing the
dxe->ctrl & WCN36xx_DXE_CTRL_VLD write before the dxe->dst_addr_l
write, thus performing DMA into the wrong address.
2. CPU reading dxe->dst_addr_l before DXE unsets dxe->ctrl &
WCN36xx_DXE_CTRL_VLD. This should generally be harmless since DXE
doesn't write dxe->dst_addr_l (no risk of freeing the wrong skb).
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 70c46c327512f..cf4eb0fb28151 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -606,6 +606,10 @@ static int wcn36xx_rx_handle_packets(struct wcn36xx *wcn,
dxe = ctl->desc;
while (!(READ_ONCE(dxe->ctrl) & WCN36xx_DXE_CTRL_VLD)) {
+ /* do not read until we own DMA descriptor */
+ dma_rmb();
+
+ /* read/modify DMA descriptor */
skb = ctl->skb;
dma_addr = dxe->dst_addr_l;
ret = wcn36xx_dxe_fill_skb(wcn->dev, ctl, GFP_ATOMIC);
@@ -616,9 +620,15 @@ static int wcn36xx_rx_handle_packets(struct wcn36xx *wcn,
dma_unmap_single(wcn->dev, dma_addr, WCN36XX_PKT_SIZE,
DMA_FROM_DEVICE);
wcn36xx_rx_skb(wcn, skb);
- } /* else keep old skb not submitted and use it for rx DMA */
+ }
+ /* else keep old skb not submitted and reuse it for rx DMA
+ * (dropping the packet that it contained)
+ */
+ /* flush descriptor changes before re-marking as valid */
+ dma_wmb();
dxe->ctrl = ctrl;
+
ctl = ctl->next;
dxe = ctl->desc;
}
--
2.33.0
From: Shyam Sundar S K <[email protected]>
[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]
For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.
Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/amd/xgbe/xgbe-common.h | 8 ++++++++
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 20 +++++++++++++++++++-
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
index b2cd3bdba9f89..533b8519ec352 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
@@ -1331,6 +1331,10 @@
#define MDIO_VEND2_PMA_CDR_CONTROL 0x8056
#endif
+#ifndef MDIO_VEND2_PMA_MISC_CTRL0
+#define MDIO_VEND2_PMA_MISC_CTRL0 0x8090
+#endif
+
#ifndef MDIO_CTRL1_SPEED1G
#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
#endif
@@ -1389,6 +1393,10 @@
#define XGBE_PMA_RX_RST_0_RESET_ON 0x10
#define XGBE_PMA_RX_RST_0_RESET_OFF 0x00
+#define XGBE_PMA_PLL_CTRL_MASK BIT(15)
+#define XGBE_PMA_PLL_CTRL_ENABLE BIT(15)
+#define XGBE_PMA_PLL_CTRL_DISABLE 0x0000
+
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 18e48b3bc402b..213769054391c 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1977,12 +1977,26 @@ static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata)
}
}
+static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
+{
+ XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
+ XGBE_PMA_PLL_CTRL_MASK,
+ enable ? XGBE_PMA_PLL_CTRL_ENABLE
+ : XGBE_PMA_PLL_CTRL_DISABLE);
+
+ /* Wait for command to complete */
+ usleep_range(100, 200);
+}
+
static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
unsigned int cmd, unsigned int sub_cmd)
{
unsigned int s0 = 0;
unsigned int wait;
+ /* Disable PLL re-initialization during FW command processing */
+ xgbe_phy_pll_ctrl(pdata, false);
+
/* Log if a previous command did not complete */
if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) {
netif_dbg(pdata, link, pdata->netdev,
@@ -2003,7 +2017,7 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
wait = XGBE_RATECHANGE_COUNT;
while (wait--) {
if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
- return;
+ goto reenable_pll;
usleep_range(1000, 2000);
}
@@ -2013,6 +2027,10 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
/* Reset on error */
xgbe_phy_rx_reset(pdata);
+
+reenable_pll:
+ /* Enable PLL re-initialization */
+ xgbe_phy_pll_ctrl(pdata, true);
}
static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
--
2.33.0
From: Loic Poulain <[email protected]>
[ Upstream commit 113f304dbc1627c6ec9d5329d839964095768980 ]
The firmware is offering features such as ARP offload, for which
firmware crafts its own (QoS)packets without waking up the host.
Point is that the sequence numbers generated by the firmware are
not in sync with the host mac80211 layer and can cause packets
such as firmware ARP reponses to be dropped by the AP (too old SN).
To fix this we need to let the firmware manages the sequence
numbers by its own (except for QoS null frames). There is a SN
counter for each QoS queue and one global/baseline counter for
Non-QoS.
Fixes: 84aff52e4f57 ("wcn36xx: Use sequence number allocated by mac80211")
Signed-off-by: Loic Poulain <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index c0f51fa13dfa1..bbd7194c82e27 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -344,8 +344,6 @@ static void wcn36xx_set_tx_pdu(struct wcn36xx_tx_bd *bd,
bd->pdu.mpdu_header_off;
bd->pdu.mpdu_len = len;
bd->pdu.tid = tid;
- /* Use seq number generated by mac80211 */
- bd->pdu.bd_ssn = WCN36XX_TXBD_SSN_FILL_HOST;
}
static inline struct wcn36xx_vif *get_vif_by_addr(struct wcn36xx *wcn,
@@ -442,6 +440,9 @@ static void wcn36xx_set_tx_data(struct wcn36xx_tx_bd *bd,
tid = ieee80211_get_tid(hdr);
/* TID->QID is one-to-one mapping */
bd->queue_id = tid;
+ bd->pdu.bd_ssn = WCN36XX_TXBD_SSN_FILL_DPU_QOS;
+ } else {
+ bd->pdu.bd_ssn = WCN36XX_TXBD_SSN_FILL_DPU_NON_QOS;
}
if (info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT ||
@@ -453,6 +454,8 @@ static void wcn36xx_set_tx_data(struct wcn36xx_tx_bd *bd,
/* Don't use a regular queue for null packet (no ampdu) */
bd->queue_id = WCN36XX_TX_U_WQ_ID;
bd->bd_rate = WCN36XX_BD_RATE_CTRL;
+ if (ieee80211_is_qos_nullfunc(hdr->frame_control))
+ bd->pdu.bd_ssn = WCN36XX_TXBD_SSN_FILL_HOST;
}
if (bcast) {
@@ -512,6 +515,8 @@ static void wcn36xx_set_tx_mgmt(struct wcn36xx_tx_bd *bd,
bd->queue_id = WCN36XX_TX_U_WQ_ID;
*vif_priv = __vif_priv;
+ bd->pdu.bd_ssn = WCN36XX_TXBD_SSN_FILL_DPU_NON_QOS;
+
wcn36xx_set_tx_pdu(bd,
ieee80211_is_data_qos(hdr->frame_control) ?
sizeof(struct ieee80211_qos_hdr) :
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 1ffec389a6431782a8a28805830b6fae9bf00af1 ]
The function uses "type" as an array index:
q = unit[drive].disk[type]->queue;
Unfortunately the bounds check on "type" isn't done until later in the
function. Fix this by moving the bounds check to the start.
Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index e6264db11e415..0a86f9d3a3798 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -726,8 +726,12 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
unsigned long flags;
int ret;
- if (type)
+ if (type) {
type--;
+ if (type >= NUM_DISK_MINORS ||
+ minor2disktype[type].drive_types > DriveType)
+ return -EINVAL;
+ }
q = unit[drive].disk[type]->queue;
blk_mq_freeze_queue(q);
@@ -739,11 +743,6 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
local_irq_restore(flags);
if (type) {
- if (type >= NUM_DISK_MINORS ||
- minor2disktype[type].drive_types > DriveType) {
- ret = -EINVAL;
- goto out;
- }
type = minor2disktype[type].index;
UDT = &atari_disk_type[type];
}
--
2.33.0
From: Junji Wei <[email protected]>
[ Upstream commit dcd3f985b20ffcc375f82ca0ca9f241c7025eb5e ]
The port->attr.port_cap_flags should be set to enum
ib_port_capability_mask_bits in ib_mad.h, not
RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Junji Wei <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_param.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_param.h b/drivers/infiniband/sw/rxe/rxe_param.h
index 25ab50d9b7c28..f9fb56ec6dfda 100644
--- a/drivers/infiniband/sw/rxe/rxe_param.h
+++ b/drivers/infiniband/sw/rxe/rxe_param.h
@@ -108,7 +108,7 @@ enum rxe_device_param {
/* default/initial rxe port parameters */
enum rxe_port_param {
RXE_PORT_GID_TBL_LEN = 1024,
- RXE_PORT_PORT_CAP_FLAGS = RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP,
+ RXE_PORT_PORT_CAP_FLAGS = IB_PORT_CM_SUP,
RXE_PORT_MAX_MSG_SZ = 0x800000,
RXE_PORT_BAD_PKEY_CNTR = 0,
RXE_PORT_QKEY_VIOL_CNTR = 0,
--
2.33.0
From: Daniel Jordan <[email protected]>
[ Upstream commit 68b6dea802cea0dbdd8bd7ccc60716b5a32a5d8a ]
These three events can race when pcrypt is used multiple times in a
template ("pcrypt(pcrypt(...))"):
1. [taskA] The caller makes the crypto request via crypto_aead_encrypt()
2. [kworkerB] padata serializes the inner pcrypt request
3. [kworkerC] padata serializes the outer pcrypt request
3 might finish before the call to crypto_aead_encrypt() returns in 1,
resulting in two possible issues.
First, a use-after-free of the crypto request's memory when, for
example, taskA writes to the outer pcrypt request's padata->info in
pcrypt_aead_enc() after kworkerC completes the request.
Second, the outer pcrypt request overwrites the inner pcrypt request's
return code with -EINPROGRESS, making a successful request appear to
fail. For instance, kworkerB writes the outer pcrypt request's
padata->info in pcrypt_aead_done() and then taskA overwrites it
in pcrypt_aead_enc().
Avoid both situations by delaying the write of padata->info until after
the inner crypto request's return code is checked. This prevents the
use-after-free by not touching the crypto request's memory after the
next-inner crypto request is made, and stops padata->info from being
overwritten.
Fixes: 5068c7a883d16 ("crypto: pcrypt - Add pcrypt crypto parallelization wrapper")
Reported-by: [email protected]
Signed-off-by: Daniel Jordan <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/pcrypt.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
index d569c7ed6c800..9d10b846ccf73 100644
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -78,12 +78,14 @@ static void pcrypt_aead_enc(struct padata_priv *padata)
{
struct pcrypt_request *preq = pcrypt_padata_request(padata);
struct aead_request *req = pcrypt_request_ctx(preq);
+ int ret;
- padata->info = crypto_aead_encrypt(req);
+ ret = crypto_aead_encrypt(req);
- if (padata->info == -EINPROGRESS)
+ if (ret == -EINPROGRESS)
return;
+ padata->info = ret;
padata_do_serial(padata);
}
@@ -123,12 +125,14 @@ static void pcrypt_aead_dec(struct padata_priv *padata)
{
struct pcrypt_request *preq = pcrypt_padata_request(padata);
struct aead_request *req = pcrypt_request_ctx(preq);
+ int ret;
- padata->info = crypto_aead_decrypt(req);
+ ret = crypto_aead_decrypt(req);
- if (padata->info == -EINPROGRESS)
+ if (ret == -EINPROGRESS)
return;
+ padata->info = ret;
padata_do_serial(padata);
}
--
2.33.0
From: Frank Rowand <[email protected]>
[ Upstream commit e85860e5bc077865a04f0a88d0b0335d3200484a ]
The console message text for gpio hog errors does not match
what unittest expects.
Fixes: f4056e705b2ef ("of: unittest: add overlay gpio test to catch gpio hog problem")
Signed-off-by: Frank Rowand <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/unittest.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index eb51bc1474401..1d4b0b7d0cc10 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1682,19 +1682,19 @@ static void __init of_unittest_overlay_gpio(void)
*/
EXPECT_BEGIN(KERN_INFO,
- "GPIO line <<int>> (line-B-input) hogged as input\n");
+ "gpio-<<int>> (line-B-input): hogged as input\n");
EXPECT_BEGIN(KERN_INFO,
- "GPIO line <<int>> (line-A-input) hogged as input\n");
+ "gpio-<<int>> (line-A-input): hogged as input\n");
ret = platform_driver_register(&unittest_gpio_driver);
if (unittest(ret == 0, "could not register unittest gpio driver\n"))
return;
EXPECT_END(KERN_INFO,
- "GPIO line <<int>> (line-A-input) hogged as input\n");
+ "gpio-<<int>> (line-A-input): hogged as input\n");
EXPECT_END(KERN_INFO,
- "GPIO line <<int>> (line-B-input) hogged as input\n");
+ "gpio-<<int>> (line-B-input): hogged as input\n");
unittest(probe_pass_count + 2 == unittest_gpio_probe_pass_count,
"unittest_gpio_probe() failed or not called\n");
@@ -1721,7 +1721,7 @@ static void __init of_unittest_overlay_gpio(void)
chip_request_count = unittest_gpio_chip_request_count;
EXPECT_BEGIN(KERN_INFO,
- "GPIO line <<int>> (line-D-input) hogged as input\n");
+ "gpio-<<int>> (line-D-input): hogged as input\n");
/* overlay_gpio_03 contains gpio node and child gpio hog node */
@@ -1729,7 +1729,7 @@ static void __init of_unittest_overlay_gpio(void)
"Adding overlay 'overlay_gpio_03' failed\n");
EXPECT_END(KERN_INFO,
- "GPIO line <<int>> (line-D-input) hogged as input\n");
+ "gpio-<<int>> (line-D-input): hogged as input\n");
unittest(probe_pass_count + 1 == unittest_gpio_probe_pass_count,
"unittest_gpio_probe() failed or not called\n");
@@ -1768,7 +1768,7 @@ static void __init of_unittest_overlay_gpio(void)
*/
EXPECT_BEGIN(KERN_INFO,
- "GPIO line <<int>> (line-C-input) hogged as input\n");
+ "gpio-<<int>> (line-C-input): hogged as input\n");
/* overlay_gpio_04b contains child gpio hog node */
@@ -1776,7 +1776,7 @@ static void __init of_unittest_overlay_gpio(void)
"Adding overlay 'overlay_gpio_04b' failed\n");
EXPECT_END(KERN_INFO,
- "GPIO line <<int>> (line-C-input) hogged as input\n");
+ "gpio-<<int>> (line-C-input): hogged as input\n");
unittest(chip_request_count + 1 == unittest_gpio_chip_request_count,
"unittest_gpio_chip_request() called %d times (expected 1 time)\n",
--
2.33.0
From: Lad Prabhakar <[email protected]>
[ Upstream commit 0b0a281ed7001d4c4f4c47bdc84680c4997761ca ]
rpcif_sw_init() can fail so make sure we check the return value
of it and on error exit rpcif_spi_probe() callback with error code.
Fixes: eb8d6d464a27 ("spi: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-rpc-if.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-rpc-if.c b/drivers/spi/spi-rpc-if.c
index 3579675485a5e..727d7cf0a6ad8 100644
--- a/drivers/spi/spi-rpc-if.c
+++ b/drivers/spi/spi-rpc-if.c
@@ -139,7 +139,9 @@ static int rpcif_spi_probe(struct platform_device *pdev)
return -ENOMEM;
rpc = spi_controller_get_devdata(ctlr);
- rpcif_sw_init(rpc, parent);
+ error = rpcif_sw_init(rpc, parent);
+ if (error)
+ return error;
platform_set_drvdata(pdev, ctlr);
--
2.33.0
From: Marijn Suijten <[email protected]>
[ Upstream commit 8ccecf6c710b8c048eecc65709640642e5357d6e ]
According to YAML validation, and for a future patchset putting this
xo_board reference clock to use as VCO reference parent, add the missing
clock to dsi_phy0.
Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support")
Signed-off-by: Marijn Suijten <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 51f5f904f9eb9..5f7426fb4e419 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1528,8 +1528,8 @@
#phy-cells = <0>;
qcom,dsi-phy-index = <0>;
- clocks = <&mmcc MDSS_AHB_CLK>;
- clock-names = "iface";
+ clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+ clock-names = "iface", "ref";
};
};
--
2.33.0
From: Jon Maxwell <[email protected]>
[ Upstream commit cf12e6f9124629b18a6182deefc0315f0a73a199 ]
v1: Implement a more general statement as recommended by Eric Dumazet. The
sequence number will be advanced, so this check will fix the FIN case and
other cases.
A customer reported sockets stuck in the CLOSING state. A Vmcore revealed that
the write_queue was not empty as determined by tcp_write_queue_empty() but the
sk_buff containing the FIN flag had been freed and the socket was zombied in
that state. Corresponding pcaps show no FIN from the Linux kernel on the wire.
Some instrumentation was added to the kernel and it was found that there is a
timing window where tcp_sendmsg() can run after tcp_send_fin().
tcp_sendmsg() will hit an error, for example:
1269 ▹ if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN))↩
1270 ▹ ▹ goto do_error;↩
tcp_remove_empty_skb() will then free the FIN sk_buff as "skb->len == 0". The
TCP socket is now wedged in the FIN-WAIT-1 state because the FIN is never sent.
If the other side sends a FIN packet the socket will transition to CLOSING and
remain that way until the system is rebooted.
Fix this by checking for the FIN flag in the sk_buff and don't free it if that
is the case. Testing confirmed that fixed the issue.
Fixes: fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Jon Maxwell <[email protected]>
Reported-by: Monir Zouaoui <[email protected]>
Reported-by: Simon Stier <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 65eb0a523e3f5..e8aca226c4ae3 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -956,7 +956,7 @@ int tcp_send_mss(struct sock *sk, int *size_goal, int flags)
*/
static void tcp_remove_empty_skb(struct sock *sk, struct sk_buff *skb)
{
- if (skb && !skb->len) {
+ if (skb && TCP_SKB_CB(skb)->seq == TCP_SKB_CB(skb)->end_seq) {
tcp_unlink_write_queue(skb, sk);
if (tcp_write_queue_empty(sk))
tcp_chrono_stop(sk, TCP_CHRONO_BUSY);
--
2.33.0
From: Alexandru Ardelean <[email protected]>
[ Upstream commit 9f0b3e0cc0c88618aa9e5cecef747b1337ae0a5d ]
Up until commit ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal
to core") only the ST pressure driver seems to have had any regulator
disable. After that commit, the regulator handling was moved into the
common st_sensors logic.
In all instances of this regulator handling, the regulators were disabled
before unregistering the IIO device.
This can cause issues where the device would be powered down and still be
available to userspace, allowing it to send invalid/garbage data.
This change moves the st_sensors_power_disable() after the common probe
functions. These common probe functions also handle unregistering the IIO
device.
Fixes: 774487611c949 ("iio: pressure-core: st: Provide support for the Vdd power supply")
Fixes: ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal to core")
Cc: Lee Jones <[email protected]>
Cc: Denis CIOCCA <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/accel/st_accel_i2c.c | 4 ++--
drivers/iio/accel/st_accel_spi.c | 4 ++--
drivers/iio/gyro/st_gyro_i2c.c | 4 ++--
drivers/iio/gyro/st_gyro_spi.c | 4 ++--
drivers/iio/magnetometer/st_magn_i2c.c | 4 ++--
drivers/iio/magnetometer/st_magn_spi.c | 4 ++--
drivers/iio/pressure/st_pressure_i2c.c | 4 ++--
drivers/iio/pressure/st_pressure_spi.c | 4 ++--
8 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 95e305b88d5ed..02c823b93ecd4 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -194,10 +194,10 @@ static int st_accel_i2c_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
- st_sensors_power_disable(indio_dev);
-
st_accel_common_remove(indio_dev);
+ st_sensors_power_disable(indio_dev);
+
return 0;
}
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 83d3308ce5ccc..386ae18d5f269 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -143,10 +143,10 @@ static int st_accel_spi_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
- st_sensors_power_disable(indio_dev);
-
st_accel_common_remove(indio_dev);
+ st_sensors_power_disable(indio_dev);
+
return 0;
}
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index a25cc0379e163..3ed5779779465 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -106,10 +106,10 @@ static int st_gyro_i2c_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
- st_sensors_power_disable(indio_dev);
-
st_gyro_common_remove(indio_dev);
+ st_sensors_power_disable(indio_dev);
+
return 0;
}
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index 18d6a2aeda45a..c04bcf2518c11 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -110,10 +110,10 @@ static int st_gyro_spi_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
- st_sensors_power_disable(indio_dev);
-
st_gyro_common_remove(indio_dev);
+ st_sensors_power_disable(indio_dev);
+
return 0;
}
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index 7a7ab27379fc1..4b6a251dd44ef 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -98,10 +98,10 @@ static int st_magn_i2c_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
- st_sensors_power_disable(indio_dev);
-
st_magn_common_remove(indio_dev);
+ st_sensors_power_disable(indio_dev);
+
return 0;
}
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index ee352f083c020..501eff32df783 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -92,10 +92,10 @@ static int st_magn_spi_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
- st_sensors_power_disable(indio_dev);
-
st_magn_common_remove(indio_dev);
+ st_sensors_power_disable(indio_dev);
+
return 0;
}
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index f0a5af314ceb8..8c26ff61e56ad 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -118,10 +118,10 @@ static int st_press_i2c_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
- st_sensors_power_disable(indio_dev);
-
st_press_common_remove(indio_dev);
+ st_sensors_power_disable(indio_dev);
+
return 0;
}
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index b48cf7d01cd74..8cf8cd3b4554a 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -102,10 +102,10 @@ static int st_press_spi_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
- st_sensors_power_disable(indio_dev);
-
st_press_common_remove(indio_dev);
+ st_sensors_power_disable(indio_dev);
+
return 0;
}
--
2.33.0
From: Michael Schmitz <[email protected]>
[ Upstream commit d28e4dff085c5a87025c9a0a85fb798bd8e9ca17 ]
As it turns out, my earlier patch in commit 86d46fdaa12a (block:
ataflop: fix breakage introduced at blk-mq refactoring) was
incomplete. This patch fixes any remaining issues found during
more testing and code review.
Requests exceeding 4 k are handled in 4k segments but
__blk_mq_end_request() is never called on these (still
sectors outstanding on the request). With redo_fd_request()
removed, there is no provision to kick off processing of the
next segment, causing requests exceeding 4k to hang. (By
setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround,
this behaviour can be avoided).
Instead of reintroducing redo_fd_request(), requeue the remainder
of the request by calling blk_mq_requeue_request() on incomplete
requests (i.e. when blk_update_request() still returns true), and
rely on the block layer to queue the residual as new request.
Both error handling and formatting needs to release the
ST-DMA lock, so call finish_fdc() on these (this was previously
handled by redo_fd_request()). finish_fdc() may be called
legitimately without the ST-DMA lock held - make sure we only
release the lock if we actually held it. In a similar way,
early exit due to errors in ataflop_queue_rq() must release
the lock.
After minor errors, fd_error sets up to recalibrate the drive
but never re-runs the current operation (another task handled by
redo_fd_request() before). Call do_fd_action() to get the next
steps (seek, retry read/write) underway.
Signed-off-by: Michael Schmitz <[email protected]>
Fixes: 6ec3938cff95f (ataflop: convert to blk-mq)
CC: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 45 +++++++++++++++++++++++++++++++++++------
1 file changed, 39 insertions(+), 6 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 0a86f9d3a3798..94b76c254db9b 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -456,10 +456,20 @@ static DEFINE_TIMER(fd_timer, check_change);
static void fd_end_request_cur(blk_status_t err)
{
+ DPRINT(("fd_end_request_cur(), bytes %d of %d\n",
+ blk_rq_cur_bytes(fd_request),
+ blk_rq_bytes(fd_request)));
+
if (!blk_update_request(fd_request, err,
blk_rq_cur_bytes(fd_request))) {
+ DPRINT(("calling __blk_mq_end_request()\n"));
__blk_mq_end_request(fd_request, err);
fd_request = NULL;
+ } else {
+ /* requeue rest of request */
+ DPRINT(("calling blk_mq_requeue_request()\n"));
+ blk_mq_requeue_request(fd_request, true);
+ fd_request = NULL;
}
}
@@ -697,12 +707,21 @@ static void fd_error( void )
if (fd_request->error_count >= MAX_ERRORS) {
printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive );
fd_end_request_cur(BLK_STS_IOERR);
+ finish_fdc();
+ return;
}
else if (fd_request->error_count == RECALIBRATE_ERRORS) {
printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive );
if (SelectedDrive != -1)
SUD.track = -1;
}
+ /* need to re-run request to recalibrate */
+ atari_disable_irq( IRQ_MFP_FDC );
+
+ setup_req_params( SelectedDrive );
+ do_fd_action( SelectedDrive );
+
+ atari_enable_irq( IRQ_MFP_FDC );
}
@@ -729,8 +748,10 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
if (type) {
type--;
if (type >= NUM_DISK_MINORS ||
- minor2disktype[type].drive_types > DriveType)
+ minor2disktype[type].drive_types > DriveType) {
+ finish_fdc();
return -EINVAL;
+ }
}
q = unit[drive].disk[type]->queue;
@@ -748,6 +769,7 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
}
if (!UDT || desc->track >= UDT->blocks/UDT->spt/2 || desc->head >= 2) {
+ finish_fdc();
ret = -EINVAL;
goto out;
}
@@ -788,6 +810,7 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
wait_for_completion(&format_wait);
+ finish_fdc();
ret = FormatError ? -EIO : 0;
out:
blk_mq_unquiesce_queue(q);
@@ -822,6 +845,7 @@ static void do_fd_action( int drive )
else {
/* all sectors finished */
fd_end_request_cur(BLK_STS_OK);
+ finish_fdc();
return;
}
}
@@ -1225,8 +1249,8 @@ static void fd_rwsec_done1(int status)
}
else {
/* all sectors finished */
- finish_fdc();
fd_end_request_cur(BLK_STS_OK);
+ finish_fdc();
}
return;
@@ -1348,7 +1372,7 @@ static void fd_times_out(struct timer_list *unused)
static void finish_fdc( void )
{
- if (!NeedSeek) {
+ if (!NeedSeek || !stdma_is_locked_by(floppy_irq)) {
finish_fdc_done( 0 );
}
else {
@@ -1383,7 +1407,8 @@ static void finish_fdc_done( int dummy )
start_motor_off_timer();
local_irq_save(flags);
- stdma_release();
+ if (stdma_is_locked_by(floppy_irq))
+ stdma_release();
local_irq_restore(flags);
DPRINT(("finish_fdc() finished\n"));
@@ -1480,7 +1505,9 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
int drive = floppy - unit;
int type = floppy->type;
- DPRINT(("Queue request: drive %d type %d last %d\n", drive, type, bd->last));
+ DPRINT(("Queue request: drive %d type %d sectors %d of %d last %d\n",
+ drive, type, blk_rq_cur_sectors(bd->rq),
+ blk_rq_sectors(bd->rq), bd->last));
spin_lock_irq(&ataflop_lock);
if (fd_request) {
@@ -1502,6 +1529,7 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
/* drive not connected */
printk(KERN_ERR "Unknown Device: fd%d\n", drive );
fd_end_request_cur(BLK_STS_IOERR);
+ stdma_release();
goto out;
}
@@ -1518,11 +1546,13 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
if (--type >= NUM_DISK_MINORS) {
printk(KERN_WARNING "fd%d: invalid disk format", drive );
fd_end_request_cur(BLK_STS_IOERR);
+ stdma_release();
goto out;
}
if (minor2disktype[type].drive_types > DriveType) {
printk(KERN_WARNING "fd%d: unsupported disk format", drive );
fd_end_request_cur(BLK_STS_IOERR);
+ stdma_release();
goto out;
}
type = minor2disktype[type].index;
@@ -1623,6 +1653,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
/* what if type > 0 here? Overwrite specified entry ? */
if (type) {
/* refuse to re-set a predefined type for now */
+ finish_fdc();
return -EINVAL;
}
@@ -1690,8 +1721,10 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
/* sanity check */
if (setprm.track != dtp->blocks/dtp->spt/2 ||
- setprm.head != 2)
+ setprm.head != 2) {
+ finish_fdc();
return -EINVAL;
+ }
UDT = dtp;
set_capacity(disk, UDT->blocks);
--
2.33.0
From: Claudio Imbrenda <[email protected]>
[ Upstream commit 1e2aa46de526a5adafe580bca4c25856bb06f09e ]
When the system is heavily overcommitted, kvm_s390_pv_init_vm might
generate stall notifications.
Fix this by using uv_call_sched instead of just uv_call. This is ok because
we are not holding spinlocks.
Signed-off-by: Claudio Imbrenda <[email protected]>
Fixes: 214d9bbcd3a672 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Christian Borntraeger <[email protected]>
Reviewed-by: Janosch Frank <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Janosch Frank <[email protected]>
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kvm/pv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/kvm/pv.c b/arch/s390/kvm/pv.c
index 74265304dd9cd..8228878872228 100644
--- a/arch/s390/kvm/pv.c
+++ b/arch/s390/kvm/pv.c
@@ -190,7 +190,7 @@ int kvm_s390_pv_init_vm(struct kvm *kvm, u16 *rc, u16 *rrc)
uvcb.conf_base_stor_origin = (u64)kvm->arch.pv.stor_base;
uvcb.conf_virt_stor_origin = (u64)kvm->arch.pv.stor_var;
- cc = uv_call(0, (u64)&uvcb);
+ cc = uv_call_sched(0, (u64)&uvcb);
*rc = uvcb.header.rc;
*rrc = uvcb.header.rrc;
KVM_UV_EVENT(kvm, 3, "PROTVIRT CREATE VM: handle %llx len %llx rc %x rrc %x",
--
2.33.0
From: Ilya Leoshkevich <[email protected]>
[ Upstream commit 45f2bebc8079788f62f22d9e8b2819afb1789d7b ]
__BYTE_ORDER is supposed to be defined by a libc, and __BYTE_ORDER__ -
by a compiler. bpf_core_read.h checks __BYTE_ORDER == __LITTLE_ENDIAN,
which is true if neither are defined, leading to incorrect behavior on
big-endian hosts if libc headers are not included, which is often the
case.
Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/bpf_core_read.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/bpf_core_read.h b/tools/lib/bpf/bpf_core_read.h
index 4538ed762a209..f05cfc082915d 100644
--- a/tools/lib/bpf/bpf_core_read.h
+++ b/tools/lib/bpf/bpf_core_read.h
@@ -40,7 +40,7 @@ enum bpf_enum_value_kind {
#define __CORE_RELO(src, field, info) \
__builtin_preserve_field_info((src)->field, BPF_FIELD_##info)
-#if __BYTE_ORDER == __LITTLE_ENDIAN
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
#define __CORE_BITFIELD_PROBE_READ(dst, src, fld) \
bpf_probe_read_kernel( \
(void *)dst, \
--
2.33.0
From: Rafał Miłecki <[email protected]>
[ Upstream commit c5e1df3276d7a500678da9453be31a66ad115150 ]
Thix fixes:
arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']}
arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
Signed-off-by: Rafał Miłecki <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 2 +-
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 +-
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +-
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +-
arch/arm/boot/dts/bcm94708.dts | 2 +-
arch/arm/boot/dts/bcm94709.dts | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 61c7b137607e5..7900aac4f35a9 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -20,7 +20,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x08000000>;
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 6c6bb7b17d27a..7546c8d07bcd7 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x08000000>;
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index d29e7f80ea6aa..beae9eab9cb8c 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x18000000>;
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index 38fbefdf2e4e4..ee94455a7236d 100644
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -16,7 +16,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x08000000>;
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 7989a53597d4f..56d309dbc6b0d 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x08000000>;
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 87b655be674c5..184e3039aa864 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -30,7 +30,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x08000000>;
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index f806be5da7237..c2a266a439d05 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 2666195b6ffeb..3d415d874bd39 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -16,7 +16,7 @@
bootargs = "earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x18000000>;
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 3b978dc8997a4..612d61852bfb9 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -20,7 +20,7 @@
bootargs = " console=ttyS0,115200n8 earlycon";
};
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>;
device_type = "memory";
};
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
index 3d13e46c69494..d9eb2040b9631 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -38,7 +38,7 @@
model = "NorthStar SVK (BCM94708)";
compatible = "brcm,bcm94708", "brcm,bcm4708";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
index 5017b7b259cbe..618c812eef73e 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -38,7 +38,7 @@
model = "NorthStar SVK (BCM94709)";
compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
--
2.33.0
From: Mark Brown <[email protected]>
[ Upstream commit 7eba41fe8c7bb01ff3d4b757bd622375792bc720 ]
In commit c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
we added SPI IDs for all the DT aliases to handle the fact that we always
use SPI modaliases to load modules even when probed via DT however the
mentioned commit missed that the SPI and OF device ID entries did not
match and were different and so DT nodes with compatible
"tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi
rather than just fix the existing one since what's currently there is
going to be better for anyone actually using SPI IDs to instantiate.
Fixes: c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm_tis_spi_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c
index de4209003a448..d64bea3298a29 100644
--- a/drivers/char/tpm/tpm_tis_spi_main.c
+++ b/drivers/char/tpm/tpm_tis_spi_main.c
@@ -263,6 +263,7 @@ static const struct spi_device_id tpm_tis_spi_id[] = {
{ "st33htpm-spi", (unsigned long)tpm_tis_spi_probe },
{ "slb9670", (unsigned long)tpm_tis_spi_probe },
{ "tpm_tis_spi", (unsigned long)tpm_tis_spi_probe },
+ { "tpm_tis-spi", (unsigned long)tpm_tis_spi_probe },
{ "cr50", (unsigned long)cr50_spi_probe },
{}
};
--
2.33.0
From: Hao Wu <[email protected]>
[ Upstream commit 79ca6f74dae067681a779fd573c2eb59649989bc ]
The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```
The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0 TPM 1.2 Version Info:
Chip Version: 1.2.66.1
Spec Level: 2
Errata Revision: 3
TPM Vendor ID: ATML
TPM Version: 01010000
Manufacturer Info: 41544d4c
```
The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.
A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.
To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.
[1] 9f3fc7bcddcb tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2] cf151a9a44d5 tpm: reduce tpm polling delay in tpm_tis_core
[3] 59f5a6b07f64 tpm: reduce poll sleep time in tpm_transmit()
[4] 424eaf910c32 tpm: reduce polling time to usecs for even finer
granularity
Fixes: 9f3fc7bcddcb ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/[email protected]/
Signed-off-by: Hao Wu <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 26 ++++++++++++++++++--------
drivers/char/tpm/tpm_tis_core.h | 4 ++++
include/linux/tpm.h | 1 +
3 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 69579efb247b3..b2659a4c40168 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -48,6 +48,7 @@ static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
unsigned long timeout, wait_queue_head_t *queue,
bool check_cancel)
{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
unsigned long stop;
long rc;
u8 status;
@@ -80,8 +81,8 @@ again:
}
} else {
do {
- usleep_range(TPM_TIMEOUT_USECS_MIN,
- TPM_TIMEOUT_USECS_MAX);
+ usleep_range(priv->timeout_min,
+ priv->timeout_max);
status = chip->ops->status(chip);
if ((status & mask) == mask)
return 0;
@@ -945,7 +946,22 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
+ priv->timeout_min = TPM_TIMEOUT_USECS_MIN;
+ priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
priv->phy_ops = phy_ops;
+
+ rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
+ if (rc < 0)
+ goto out_err;
+
+ priv->manufacturer_id = vendor;
+
+ if (priv->manufacturer_id == TPM_VID_ATML &&
+ !(chip->flags & TPM_CHIP_FLAG_TPM2)) {
+ priv->timeout_min = TIS_TIMEOUT_MIN_ATML;
+ priv->timeout_max = TIS_TIMEOUT_MAX_ATML;
+ }
+
dev_set_drvdata(&chip->dev, priv);
if (is_bsw()) {
@@ -988,12 +1004,6 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
if (rc)
goto out_err;
- rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
- if (rc < 0)
- goto out_err;
-
- priv->manufacturer_id = vendor;
-
rc = tpm_tis_read8(priv, TPM_RID(0), &rid);
if (rc < 0)
goto out_err;
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index b2a3c6c72882d..3be24f221e32a 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -54,6 +54,8 @@ enum tis_defaults {
TIS_MEM_LEN = 0x5000,
TIS_SHORT_TIMEOUT = 750, /* ms */
TIS_LONG_TIMEOUT = 2000, /* 2 sec */
+ TIS_TIMEOUT_MIN_ATML = 14700, /* usecs */
+ TIS_TIMEOUT_MAX_ATML = 15000, /* usecs */
};
/* Some timeout values are needed before it is known whether the chip is
@@ -98,6 +100,8 @@ struct tpm_tis_data {
wait_queue_head_t read_queue;
const struct tpm_tis_phy_ops *phy_ops;
unsigned short rng_quality;
+ unsigned int timeout_min; /* usecs */
+ unsigned int timeout_max; /* usecs */
};
struct tpm_tis_phy_ops {
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 804a3f69bbd93..95c3069823f9b 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -262,6 +262,7 @@ enum tpm2_cc_attrs {
#define TPM_VID_INTEL 0x8086
#define TPM_VID_WINBOND 0x1050
#define TPM_VID_STM 0x104A
+#define TPM_VID_ATML 0x1114
enum tpm_chip_flags {
TPM_CHIP_FLAG_TPM2 = BIT(1),
--
2.33.0
From: Jackie Liu <[email protected]>
[ Upstream commit 2aa717473ce96c93ae43a5dc8c23cedc8ce7dd9f ]
The s3c24xx_init_intc() returns an error pointer upon failure, not NULL.
let's add an error pointer check in s3c24xx_handle_irq.
s3c_intc[0] is not NULL or ERR, we can simplify the code.
Fixes: 1f629b7a3ced ("ARM: S3C24XX: transform irq handling into a declarative form")
Signed-off-by: Jackie Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-s3c/irq-s3c24xx.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
index 79b5f19af7a52..19fb9bdf446b4 100644
--- a/arch/arm/mach-s3c/irq-s3c24xx.c
+++ b/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -360,11 +360,25 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
{
do {
- if (likely(s3c_intc[0]))
- if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
- continue;
+ /*
+ * For platform based machines, neither ERR nor NULL can happen here.
+ * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds:
+ *
+ * s3c_intc[0] = s3c24xx_init_intc()
+ *
+ * If this fails, the next calls to s3c24xx_init_intc() won't be executed.
+ *
+ * For DT machine, s3c_init_intc_of() could set the IRQ handler without
+ * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no
+ * such code path, so again the s3c_intc[0] will have a valid pointer if
+ * set_handle_irq() is called.
+ *
+ * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something.
+ */
+ if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
+ continue;
- if (s3c_intc[2])
+ if (!IS_ERR_OR_NULL(s3c_intc[2]))
if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
continue;
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit af9617b419f77cf0b99702a7b2b0519da0d27715 ]
If we exit the for_each_of_cpu_node loop early, the reference on the
current node must be decremented, otherwise there is a leak.
Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/545df946044fc1fc05a4217cdf0054be7a79e49e.1619161112.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/mvebu/ap-cpu-clk.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/mvebu/ap-cpu-clk.c b/drivers/clk/mvebu/ap-cpu-clk.c
index b4259b60dcfd6..25de4b6da776f 100644
--- a/drivers/clk/mvebu/ap-cpu-clk.c
+++ b/drivers/clk/mvebu/ap-cpu-clk.c
@@ -256,12 +256,15 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
int cpu, err;
err = of_property_read_u32(dn, "reg", &cpu);
- if (WARN_ON(err))
+ if (WARN_ON(err)) {
+ of_node_put(dn);
return err;
+ }
/* If cpu2 or cpu3 is enabled */
if (cpu & APN806_CLUSTER_NUM_MASK) {
nclusters = 2;
+ of_node_put(dn);
break;
}
}
@@ -288,8 +291,10 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
int cpu, err;
err = of_property_read_u32(dn, "reg", &cpu);
- if (WARN_ON(err))
+ if (WARN_ON(err)) {
+ of_node_put(dn);
return err;
+ }
cluster_index = cpu & APN806_CLUSTER_NUM_MASK;
cluster_index >>= APN806_CLUSTER_NUM_OFFSET;
@@ -301,6 +306,7 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
parent = of_clk_get(np, cluster_index);
if (IS_ERR(parent)) {
dev_err(dev, "Could not get the clock parent\n");
+ of_node_put(dn);
return -EINVAL;
}
parent_name = __clk_get_name(parent);
@@ -319,8 +325,10 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
init.parent_names = &parent_name;
ret = devm_clk_hw_register(dev, &ap_cpu_clk[cluster_index].hw);
- if (ret)
+ if (ret) {
+ of_node_put(dn);
return ret;
+ }
ap_cpu_data->hws[cluster_index] = &ap_cpu_clk[cluster_index].hw;
}
--
2.33.0
From: Jackie Liu <[email protected]>
[ Upstream commit 7f3b3c2bfa9c93ab9b5595543496f570983dc330 ]
mach/loongson64 fails to build when the FPU support is disabled:
arch/mips/loongson64/cop2-ex.c:45:15: error: implicit declaration of function ‘__is_fpu_owner’; did you mean ‘is_fpu_owner’? [-Werror=implicit-function-declaration]
arch/mips/loongson64/cop2-ex.c:98:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:99:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:131:43: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:137:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:203:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:219:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:283:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:301:38: error: ‘struct thread_struct’ has no member named ‘fpu’
Fixes: ef2f826c8f2f ("MIPS: Loongson-3: Enable the COP2 usage")
Suggested-by: Huacai Chen <[email protected]>
Reviewed-by: Huacai Chen <[email protected]>
Reported-by: k2ci robot <[email protected]>
Signed-off-by: Jackie Liu <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1a63f592034eb..5c6e9ed9b2a75 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1380,6 +1380,7 @@ config CPU_LOONGSON64
select MIPS_ASID_BITS_VARIABLE
select MIPS_PGD_C0_CONTEXT
select MIPS_L1_CACHE_SHIFT_6
+ select MIPS_FP_SUPPORT
select GPIOLIB
select SWIOTLB
select HAVE_KVM
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 59a8bda062f8646d99ff8c4956adf37dee1cb75e ]
While networking works fine in RGMII mode when using the Linux generic
PHY driver, it fails when using the Atheros PHY driver.
Fix this by correcting the Ethernet PHY mode to RGMII-RXID, which works
fine with both drivers.
Fixes: a5200e63af57d05e ("arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling")
Reported-by: Adam Ford <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/2a4c15b2df23bb63f15abf9dfb88860477f4f523.1632465965.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 3c73dfc430afc..929c7910c68df 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -54,6 +54,7 @@
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
+ phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
rx-internal-delay-ps = <1800>;
tx-internal-delay-ps = <2000>;
--
2.33.0
From: Dongliang Mu <[email protected]>
[ Upstream commit c48a14dca2cb57527dde6b960adbe69953935f10 ]
In jfs_mount, when diMount(ipaimap2) fails, it goes to errout35. However,
the following code does not free ipaimap2 allocated by diReadSpecial.
Fix this by refactoring the error handling code of jfs_mount. To be
specific, modify the lable name and free ipaimap2 when the above error
ocurrs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dongliang Mu <[email protected]>
Signed-off-by: Dave Kleikamp <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jfs/jfs_mount.c | 51 ++++++++++++++++++++--------------------------
1 file changed, 22 insertions(+), 29 deletions(-)
diff --git a/fs/jfs/jfs_mount.c b/fs/jfs/jfs_mount.c
index 5d7d7170c03c0..aa4ff7bcaff23 100644
--- a/fs/jfs/jfs_mount.c
+++ b/fs/jfs/jfs_mount.c
@@ -81,14 +81,14 @@ int jfs_mount(struct super_block *sb)
* (initialize mount inode from the superblock)
*/
if ((rc = chkSuper(sb))) {
- goto errout20;
+ goto out;
}
ipaimap = diReadSpecial(sb, AGGREGATE_I, 0);
if (ipaimap == NULL) {
jfs_err("jfs_mount: Failed to read AGGREGATE_I");
rc = -EIO;
- goto errout20;
+ goto out;
}
sbi->ipaimap = ipaimap;
@@ -99,7 +99,7 @@ int jfs_mount(struct super_block *sb)
*/
if ((rc = diMount(ipaimap))) {
jfs_err("jfs_mount: diMount(ipaimap) failed w/rc = %d", rc);
- goto errout21;
+ goto err_ipaimap;
}
/*
@@ -108,7 +108,7 @@ int jfs_mount(struct super_block *sb)
ipbmap = diReadSpecial(sb, BMAP_I, 0);
if (ipbmap == NULL) {
rc = -EIO;
- goto errout22;
+ goto err_umount_ipaimap;
}
jfs_info("jfs_mount: ipbmap:0x%p", ipbmap);
@@ -120,7 +120,7 @@ int jfs_mount(struct super_block *sb)
*/
if ((rc = dbMount(ipbmap))) {
jfs_err("jfs_mount: dbMount failed w/rc = %d", rc);
- goto errout22;
+ goto err_ipbmap;
}
/*
@@ -139,7 +139,7 @@ int jfs_mount(struct super_block *sb)
if (!ipaimap2) {
jfs_err("jfs_mount: Failed to read AGGREGATE_I");
rc = -EIO;
- goto errout35;
+ goto err_umount_ipbmap;
}
sbi->ipaimap2 = ipaimap2;
@@ -151,7 +151,7 @@ int jfs_mount(struct super_block *sb)
if ((rc = diMount(ipaimap2))) {
jfs_err("jfs_mount: diMount(ipaimap2) failed, rc = %d",
rc);
- goto errout35;
+ goto err_ipaimap2;
}
} else
/* Secondary aggregate inode table is not valid */
@@ -168,7 +168,7 @@ int jfs_mount(struct super_block *sb)
jfs_err("jfs_mount: Failed to read FILESYSTEM_I");
/* open fileset secondary inode allocation map */
rc = -EIO;
- goto errout40;
+ goto err_umount_ipaimap2;
}
jfs_info("jfs_mount: ipimap:0x%p", ipimap);
@@ -178,41 +178,34 @@ int jfs_mount(struct super_block *sb)
/* initialize fileset inode allocation map */
if ((rc = diMount(ipimap))) {
jfs_err("jfs_mount: diMount failed w/rc = %d", rc);
- goto errout41;
+ goto err_ipimap;
}
- goto out;
+ return rc;
/*
* unwind on error
*/
- errout41: /* close fileset inode allocation map inode */
+err_ipimap:
+ /* close fileset inode allocation map inode */
diFreeSpecial(ipimap);
-
- errout40: /* fileset closed */
-
+err_umount_ipaimap2:
/* close secondary aggregate inode allocation map */
- if (ipaimap2) {
+ if (ipaimap2)
diUnmount(ipaimap2, 1);
+err_ipaimap2:
+ /* close aggregate inodes */
+ if (ipaimap2)
diFreeSpecial(ipaimap2);
- }
-
- errout35:
-
- /* close aggregate block allocation map */
+err_umount_ipbmap: /* close aggregate block allocation map */
dbUnmount(ipbmap, 1);
+err_ipbmap: /* close aggregate inodes */
diFreeSpecial(ipbmap);
-
- errout22: /* close aggregate inode allocation map */
-
+err_umount_ipaimap: /* close aggregate inode allocation map */
diUnmount(ipaimap, 1);
-
- errout21: /* close aggregate inodes */
+err_ipaimap: /* close aggregate inodes */
diFreeSpecial(ipaimap);
- errout20: /* aggregate closed */
-
- out:
-
+out:
if (rc)
jfs_err("Mount JFS Failure: %d", rc);
--
2.33.0
From: Imre Deak <[email protected]>
[ Upstream commit 472e18f63c425dda97b888f40f858ea54e3efc17 ]
Make sure the HDA driver's display power reference is released during
shutdown/reboot.
During the shutdown/reboot sequence the pci device core calls the
pm_runtime_resume handler for all devices before calling the driver's
shutdown callback and so the HDA driver's runtime resume callback will
acquire a display power reference (on HSW/BDW). This triggers a power
reference held WARN on HSW/BDW in the i915 driver's subsequent shutdown
handler, which expects all display power references to be released by
that time.
Since the HDA controller is stopped in the shutdown handler in any case,
let's follow here the same sequence as the one during runtime suspend.
This will also reset the HDA link and drop the display power reference,
getting rid of the above WARN.
Tested on HSW.
v2:
- Fix the build for CONFIG_PM=n (Takashi)
- s/__azx_runtime_suspend/azx_shutdown_chip/
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3618
Reported-and-tested-by: Thomas Voegtle <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index a8eae31e47efb..e31eafe73661f 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -936,6 +936,14 @@ static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev)
return azx_get_pos_posbuf(chip, azx_dev);
}
+static void azx_shutdown_chip(struct azx *chip)
+{
+ azx_stop_chip(chip);
+ azx_enter_link_reset(chip);
+ azx_clear_irq_pending(chip);
+ display_power(chip, false);
+}
+
#ifdef CONFIG_PM
static DEFINE_MUTEX(card_list_lock);
static LIST_HEAD(card_list);
@@ -995,14 +1003,6 @@ static bool azx_is_pm_ready(struct snd_card *card)
return true;
}
-static void __azx_runtime_suspend(struct azx *chip)
-{
- azx_stop_chip(chip);
- azx_enter_link_reset(chip);
- azx_clear_irq_pending(chip);
- display_power(chip, false);
-}
-
static void __azx_runtime_resume(struct azx *chip)
{
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
@@ -1081,7 +1081,7 @@ static int azx_suspend(struct device *dev)
chip = card->private_data;
bus = azx_bus(chip);
- __azx_runtime_suspend(chip);
+ azx_shutdown_chip(chip);
if (bus->irq >= 0) {
free_irq(bus->irq, chip);
bus->irq = -1;
@@ -1160,7 +1160,7 @@ static int azx_runtime_suspend(struct device *dev)
/* enable controller wake up event */
azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) | STATESTS_INT_MASK);
- __azx_runtime_suspend(chip);
+ azx_shutdown_chip(chip);
trace_azx_runtime_suspend(chip);
return 0;
}
@@ -2461,7 +2461,7 @@ static void azx_shutdown(struct pci_dev *pci)
return;
chip = card->private_data;
if (chip && chip->running)
- azx_stop_chip(chip);
+ azx_shutdown_chip(chip);
}
/* PCI IDs */
--
2.33.0
From: Imre Deak <[email protected]>
[ Upstream commit 0165c4e19f6ec76b535de090e4bd145c73810c51 ]
During system shutdown codecs may be still active, and resetting the
controller->codec HW link in this state - based on the bug reporter's
tests - leads to the shutdown sequence to get stuck. This happens at
least on the reporter's KBL system with an ALC662 codec.
For now fix the issue by skipping the link reset step.
Fixes: 472e18f63c42 ("ALSA: hda: Release controller display power during shutdown/reboot")
Reported-and-tested-by: [email protected]
Cc: [email protected]
Signed-off-by: Imre Deak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index e31eafe73661f..a0955e17adee9 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -936,10 +936,11 @@ static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev)
return azx_get_pos_posbuf(chip, azx_dev);
}
-static void azx_shutdown_chip(struct azx *chip)
+static void __azx_shutdown_chip(struct azx *chip, bool skip_link_reset)
{
azx_stop_chip(chip);
- azx_enter_link_reset(chip);
+ if (!skip_link_reset)
+ azx_enter_link_reset(chip);
azx_clear_irq_pending(chip);
display_power(chip, false);
}
@@ -948,6 +949,11 @@ static void azx_shutdown_chip(struct azx *chip)
static DEFINE_MUTEX(card_list_lock);
static LIST_HEAD(card_list);
+static void azx_shutdown_chip(struct azx *chip)
+{
+ __azx_shutdown_chip(chip, false);
+}
+
static void azx_add_card_list(struct azx *chip)
{
struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
@@ -2461,7 +2467,7 @@ static void azx_shutdown(struct pci_dev *pci)
return;
chip = card->private_data;
if (chip && chip->running)
- azx_shutdown_chip(chip);
+ __azx_shutdown_chip(chip, true);
}
/* PCI IDs */
--
2.33.0
From: Takashi Iwai <[email protected]>
[ Upstream commit 46243b85b0ec5d2cee7545e5ce18c015ce91957e ]
The position reporting on Intel Skylake and later chips via
azx_get_pos_skl() contains a udelay(20) call for the capture streams.
A call for this alone doesn't sound too harmful. However, as the
pointer PCM ops is one of the hottest path in the PCM operations --
especially for the timer-scheduled operations like PulseAudio -- such
a delay hogs CPU usage significantly in the total performance.
The code there was taken from the original code in ASoC SST Skylake
driver blindly. The udelay() is a workaround for the case where the
reported position is behind the period boundary at the timing
triggered from interrupts; applications often expect that the full
data is available for the whole period when returned (and also that's
the definition of the ALSA PCM period).
OTOH, HD-audio (legacy) driver has already some workarounds for the
delayed position reporting due to its relatively large FIFO, such as
the BDL position adjustment and the delayed period-elapsed call in the
work. That said, the udelay() is almost superfluous for HD-audio
driver unlike SST, and we can drop the udelay().
Though, the current code doesn't guarantee the full period readiness
as mentioned in the above, but rather it checks the wallclock and
detects the unexpected jump. That's one missing piece, and the drop
of udelay() needs a bit more sanity checks for the delayed handling.
This patch implements those: the drop of udelay() call in
azx_get_pos_skl() and the more proper check of hwptr in
azx_position_ok(). The latter change is applied only for the case
where the stream is running in the normal mode without
no_period_wakeup flag. When no_period_wakeup is set, it essentially
ignores the period handling and rather concentrates only on the
current position; which implies that we don't need to care about the
period boundary at all.
Fixes: f87e7f25893d ("ALSA: hda - Improved position reporting on SKL+")
Reported-by: Jens Axboe <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 1bae0746e7266..a8eae31e47efb 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -672,13 +672,17 @@ static int azx_position_check(struct azx *chip, struct azx_dev *azx_dev)
* the update-IRQ timing. The IRQ is issued before actually the
* data is processed. So, we need to process it afterwords in a
* workqueue.
+ *
+ * Returns 1 if OK to proceed, 0 for delay handling, -1 for skipping update
*/
static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
{
struct snd_pcm_substream *substream = azx_dev->core.substream;
+ struct snd_pcm_runtime *runtime = substream->runtime;
int stream = substream->stream;
u32 wallclk;
unsigned int pos;
+ snd_pcm_uframes_t hwptr, target;
wallclk = azx_readl(chip, WALLCLK) - azx_dev->core.start_wallclk;
if (wallclk < (azx_dev->core.period_wallclk * 2) / 3)
@@ -715,6 +719,24 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
/* NG - it's below the first next period boundary */
return chip->bdl_pos_adj ? 0 : -1;
azx_dev->core.start_wallclk += wallclk;
+
+ if (azx_dev->core.no_period_wakeup)
+ return 1; /* OK, no need to check period boundary */
+
+ if (runtime->hw_ptr_base != runtime->hw_ptr_interrupt)
+ return 1; /* OK, already in hwptr updating process */
+
+ /* check whether the period gets really elapsed */
+ pos = bytes_to_frames(runtime, pos);
+ hwptr = runtime->hw_ptr_base + pos;
+ if (hwptr < runtime->status->hw_ptr)
+ hwptr += runtime->buffer_size;
+ target = runtime->hw_ptr_interrupt + runtime->period_size;
+ if (hwptr < target) {
+ /* too early wakeup, process it later */
+ return chip->bdl_pos_adj ? 0 : -1;
+ }
+
return 1; /* OK, it's fine */
}
@@ -909,11 +931,7 @@ static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev)
if (azx_dev->core.substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
return azx_skl_get_dpib_pos(chip, azx_dev);
- /* For capture, we need to read posbuf, but it requires a delay
- * for the possible boundary overlap; the read of DPIB fetches the
- * actual posbuf
- */
- udelay(20);
+ /* read of DPIB fetches the actual posbuf */
azx_skl_get_dpib_pos(chip, azx_dev);
return azx_get_pos_posbuf(chip, azx_dev);
}
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit df0a18149474c7e6b21f6367fbc6bc8d0f192444 ]
I got memory leak as follows:
unreferenced object 0xffff88801f0b2200 (size 64):
comm "i2c-lis2hh12-21", pid 5455, jiffies 4294944606 (age 15.224s)
hex dump (first 32 bytes):
72 65 67 75 6c 61 74 6f 72 3a 72 65 67 75 6c 61 regulator:regula
74 6f 72 2e 30 2d 2d 69 32 63 3a 31 2d 30 30 31 tor.0--i2c:1-001
backtrace:
[<00000000bf5b0c3b>] __kmalloc_track_caller+0x19f/0x3a0
[<0000000050da42d9>] kvasprintf+0xb5/0x150
[<000000004bbbed13>] kvasprintf_const+0x60/0x190
[<00000000cdac7480>] kobject_set_name_vargs+0x56/0x150
[<00000000bf83f8e8>] dev_set_name+0xc0/0x100
[<00000000cc1cf7e3>] device_link_add+0x6b4/0x17c0
[<000000009db9faed>] _regulator_get+0x297/0x680
[<00000000845e7f2b>] _devm_regulator_get+0x5b/0xe0
[<000000003958ee25>] st_sensors_power_enable+0x71/0x1b0 [st_sensors]
[<000000005f450f52>] st_accel_i2c_probe+0xd9/0x150 [st_accel_i2c]
[<00000000b5f2ab33>] i2c_device_probe+0x4d8/0xbe0
[<0000000070fb977b>] really_probe+0x299/0xc30
[<0000000088e226ce>] __driver_probe_device+0x357/0x500
[<00000000c21dda32>] driver_probe_device+0x4e/0x140
[<000000004e650441>] __device_attach_driver+0x257/0x340
[<00000000cf1891b8>] bus_for_each_drv+0x166/0x1e0
When device_register() returns an error, the name allocated in dev_set_name()
will be leaked, the put_device() should be used instead of kfree() to give up
the device reference, then the name will be freed in kobject_cleanup() and the
references of consumer and supplier will be decreased in device_link_release_fn().
Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs")
Reported-by: Hulk Robot <[email protected]>
Reviewed-by: Saravana Kannan <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/core.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 2bc4db5ffe445..389d13616d1df 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -668,9 +668,7 @@ struct device_link *device_link_add(struct device *consumer,
dev_bus_name(supplier), dev_name(supplier),
dev_bus_name(consumer), dev_name(consumer));
if (device_register(&link->link_dev)) {
- put_device(consumer);
- put_device(supplier);
- kfree(link);
+ put_device(&link->link_dev);
link = NULL;
goto out;
}
--
2.33.0
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 75eac387a2539aa6c6bbee3affa23435f2096396 ]
link_id can be zero and if we have multiple controller instances
in a system like Qualcomm debugfs will end-up with duplicate namespace
resulting in incorrect debugfs entries.
Using bus-id and link-id combination should give a unique debugfs directory
entry and should fix below warning too.
"debugfs: Directory 'master-0' with parent 'soundwire' already present!"
Fixes: bf03473d5bcc ("soundwire: add debugfs support")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soundwire/debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soundwire/debugfs.c b/drivers/soundwire/debugfs.c
index b6cad0d59b7b9..49900cd207bc7 100644
--- a/drivers/soundwire/debugfs.c
+++ b/drivers/soundwire/debugfs.c
@@ -19,7 +19,7 @@ void sdw_bus_debugfs_init(struct sdw_bus *bus)
return;
/* create the debugfs master-N */
- snprintf(name, sizeof(name), "master-%d", bus->link_id);
+ snprintf(name, sizeof(name), "master-%d-%d", bus->id, bus->link_id);
bus->debugfs = debugfs_create_dir(name, sdw_debugfs_root);
}
--
2.33.0
From: Igor Pylypiv <[email protected]>
[ Upstream commit 4084a7235d38311a77c86ba69ba849bd787db87b ]
pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a
SET_NVMD_DATA response, as the log statement implies.
Fixes: 1f889b58716a ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Changyuan Lyu <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 2114d2dd3501a..5d751628a6340 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3107,7 +3107,7 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
* fw_control_context->usrAddr
*/
complete(pm8001_ha->nvmd_completion);
- pm8001_dbg(pm8001_ha, MSG, "Set nvm data complete!\n");
+ pm8001_dbg(pm8001_ha, MSG, "Get nvmd data complete!\n");
ccb->task = NULL;
ccb->ccb_tag = 0xFFFFFFFF;
pm8001_tag_free(pm8001_ha, tag);
--
2.33.0
From: Srikar Dronamraju <[email protected]>
[ Upstream commit 16520a858a995742c2d2248e86a6026bd0316562 ]
We want to reuse the is_kvm_guest() name in a subsequent patch but
with a new body. Hence rename is_kvm_guest() to check_kvm_guest(). No
additional changes.
Signed-off-by: Srikar Dronamraju <[email protected]>
Acked-by: Waiman Long <[email protected]>
Signed-off-by: kernel test robot <[email protected]> # int -> bool fix
[mpe: Fold in fix from lkp to use true/false not 0/1]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/kvm_guest.h | 4 ++--
arch/powerpc/include/asm/kvm_para.h | 2 +-
arch/powerpc/kernel/firmware.c | 8 ++++----
arch/powerpc/platforms/pseries/smp.c | 2 +-
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_guest.h b/arch/powerpc/include/asm/kvm_guest.h
index d2c946dbbd2c0..d7749ecb30d49 100644
--- a/arch/powerpc/include/asm/kvm_guest.h
+++ b/arch/powerpc/include/asm/kvm_guest.h
@@ -7,9 +7,9 @@
#define _ASM_POWERPC_KVM_GUEST_H_
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
-bool is_kvm_guest(void);
+bool check_kvm_guest(void);
#else
-static inline bool is_kvm_guest(void) { return false; }
+static inline bool check_kvm_guest(void) { return false; }
#endif
#endif /* _ASM_POWERPC_KVM_GUEST_H_ */
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index abe1b5e82547b..6fba06b6cfdbc 100644
--- a/arch/powerpc/include/asm/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -14,7 +14,7 @@
static inline int kvm_para_available(void)
{
- return IS_ENABLED(CONFIG_KVM_GUEST) && is_kvm_guest();
+ return IS_ENABLED(CONFIG_KVM_GUEST) && check_kvm_guest();
}
static inline unsigned int kvm_arch_para_features(void)
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index 5f48e5ad24cdd..c3140c6084c93 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -22,17 +22,17 @@ EXPORT_SYMBOL_GPL(powerpc_firmware_features);
#endif
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
-bool is_kvm_guest(void)
+bool check_kvm_guest(void)
{
struct device_node *hyper_node;
hyper_node = of_find_node_by_path("/hypervisor");
if (!hyper_node)
- return 0;
+ return false;
if (!of_device_is_compatible(hyper_node, "linux,kvm"))
- return 0;
+ return false;
- return 1;
+ return true;
}
#endif
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 7be7094075ab5..9d596b41ec675 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -208,7 +208,7 @@ static __init void pSeries_smp_probe(void)
if (!cpu_has_feature(CPU_FTR_SMT))
return;
- if (is_kvm_guest()) {
+ if (check_kvm_guest()) {
/*
* KVM emulates doorbells by disabling FSCR[MSGP] so msgsndp
* faults to the hypervisor which then reads the instruction
--
2.33.0
From: Nathan Lynch <[email protected]>
[ Upstream commit 56537faf8821e361d739fc5ff58c9c40f54a1d4c ]
When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it
returns without performing a matching put for the lookup, leaving the
node's reference count elevated.
Add the necessary call to of_node_put(), rearranging the code slightly to
avoid repetition or goto.
Fixes: 107c55005fbd ("powerpc/pseries: Add KVM guest doorbell restrictions")
Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Reviewed-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/firmware.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index c7022c41cc314..20328f72f9f2b 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -31,11 +31,10 @@ int __init check_kvm_guest(void)
if (!hyper_node)
return 0;
- if (!of_device_is_compatible(hyper_node, "linux,kvm"))
- return 0;
-
- static_branch_enable(&kvm_guest);
+ if (of_device_is_compatible(hyper_node, "linux,kvm"))
+ static_branch_enable(&kvm_guest);
+ of_node_put(hyper_node);
return 0;
}
core_initcall(check_kvm_guest); // before kvm_guest_init()
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 68e7c510fdf4f6167404609da52e1979165649f6 ]
Return an error code if usb_get_function() fails. Don't return success.
Fixes: 4bc8a33f2407 ("usb: gadget: hid: convert to new interface of f_hid")
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20211011123739.GC15188@kili
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/legacy/hid.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index 5b27d289443fe..3912cc805f3af 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -99,8 +99,10 @@ static int do_config(struct usb_configuration *c)
list_for_each_entry(e, &hidg_func_list, node) {
e->f = usb_get_function(e->fi);
- if (IS_ERR(e->f))
+ if (IS_ERR(e->f)) {
+ status = PTR_ERR(e->f);
goto put;
+ }
status = usb_add_function(c, e->f);
if (status < 0) {
usb_put_function(e->f);
--
2.33.0
From: Andy Shevchenko <[email protected]>
[ Upstream commit ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ]
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of adding ifdeffery here and there, drop ACPI_PTR().
Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support")
Reported-by: Daniel Palmer <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_dw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index a3a0154da567d..49559731bbcf1 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -726,7 +726,7 @@ static struct platform_driver dw8250_platform_driver = {
.name = "dw-apb-uart",
.pm = &dw8250_pm_ops,
.of_match_table = dw8250_of_match,
- .acpi_match_table = ACPI_PTR(dw8250_acpi_match),
+ .acpi_match_table = dw8250_acpi_match,
},
.probe = dw8250_probe,
.remove = dw8250_remove,
--
2.33.0
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 5f46633565b1c1e1840a927676065d72b442dac4 ]
commit 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device
tree nodes") restricted PCIe bus numbers from 0 to 15 (due to SMMU
restriction in J721E). However since SMMU is not enabled, allow the full
supported bus numbers from 0 to 255.
Fixes: 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes")
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Reviewed-by: Aswath Govindraju <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 4e010253b028a..85526f72b4616 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -629,7 +629,7 @@
clock-names = "fck";
#address-cells = <3>;
#size-cells = <2>;
- bus-range = <0x0 0xf>;
+ bus-range = <0x0 0xff>;
vendor-id = <0x104c>;
device-id = <0xb00d>;
msi-map = <0x0 &gic_its 0x0 0x10000>;
@@ -678,7 +678,7 @@
clock-names = "fck";
#address-cells = <3>;
#size-cells = <2>;
- bus-range = <0x0 0xf>;
+ bus-range = <0x0 0xff>;
vendor-id = <0x104c>;
device-id = <0xb00d>;
msi-map = <0x0 &gic_its 0x10000 0x10000>;
@@ -727,7 +727,7 @@
clock-names = "fck";
#address-cells = <3>;
#size-cells = <2>;
- bus-range = <0x0 0xf>;
+ bus-range = <0x0 0xff>;
vendor-id = <0x104c>;
device-id = <0xb00d>;
msi-map = <0x0 &gic_its 0x20000 0x10000>;
@@ -776,7 +776,7 @@
clock-names = "fck";
#address-cells = <3>;
#size-cells = <2>;
- bus-range = <0x0 0xf>;
+ bus-range = <0x0 0xff>;
vendor-id = <0x104c>;
device-id = <0xb00d>;
msi-map = <0x0 &gic_its 0x30000 0x10000>;
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit 1d422ecfc48ee683ae1ccc9217764f6310c0ffce ]
Add check the return value of devm_regmap_init_i2c(), otherwise
later access may cause null-ptr-deref as follows:
KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367]
RIP: 0010:regmap_read+0x33/0x170
Call Trace:
max17040_probe+0x61b/0xff0 [max17040_battery]
? write_comp_data+0x2a/0x90
? max17040_set_property+0x1d0/0x1d0 [max17040_battery]
? tracer_hardirqs_on+0x33/0x520
? __sanitizer_cov_trace_pc+0x1d/0x50
? _raw_spin_unlock_irqrestore+0x4b/0x60
? trace_hardirqs_on+0x63/0x2d0
? write_comp_data+0x2a/0x90
? __sanitizer_cov_trace_pc+0x1d/0x50
? max17040_set_property+0x1d0/0x1d0 [max17040_battery]
i2c_device_probe+0xa31/0xbe0
Fixes: 6455a8a84bdf ("power: supply: max17040: Use regmap i2c")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/max17040_battery.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c
index d956c67d51558..b6b29ec3d93ec 100644
--- a/drivers/power/supply/max17040_battery.c
+++ b/drivers/power/supply/max17040_battery.c
@@ -482,6 +482,8 @@ static int max17040_probe(struct i2c_client *client,
chip->client = client;
chip->regmap = devm_regmap_init_i2c(client, &max17040_regmap);
chip->pdata = client->dev.platform_data;
+ if (IS_ERR(chip->regmap))
+ return PTR_ERR(chip->regmap);
chip_id = (enum chip_id) id->driver_data;
if (client->dev.of_node) {
ret = max17040_get_of_data(chip);
--
2.33.0
From: Stephan Gerhold <[email protected]>
[ Upstream commit 483de2b44cd3a168458f8f9ff237e78a434729bc ]
While removing the size from the "reg" properties in pm8916.dtsi,
commit bd6429e81010 ("ARM64: dts: qcom: Remove size elements from
pmic reg properties") mistakenly also removed the second register
address for the rtc@6000 device. That one did not represent the size
of the register region but actually the address of the second "alarm"
register region of the rtc@6000 device.
Now there are "reg-names" for two "reg" elements, but there is actually
only one "reg" listed.
Since the DT schema for "qcom,pm8941-rtc" only expects one "reg"
element anyway, just drop the "reg-names" entirely to fix this.
Fixes: bd6429e81010 ("ARM64: dts: qcom: Remove size elements from pmic reg properties")
Signed-off-by: Stephan Gerhold <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/pm8916.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index f931cb0de231f..42180f1b5dbbb 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -86,7 +86,6 @@
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
- reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
--
2.33.0
From: Alex Deucher <[email protected]>
[ Upstream commit 403475be6d8b122c3e6b8a47e075926d7299e5ef ]
The DMA mask on SI parts is 40 bits not 44. Copy
paste typo.
Fixes: 244511f386ccb9 ("drm/amdgpu: simplify and cleanup setting the dma mask")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1762
Acked-by: Christian König <[email protected]>
Tested-by: Paul Menzel <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
index 95a9117e95640..861d0cc45fc10 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
@@ -842,12 +842,12 @@ static int gmc_v6_0_sw_init(void *handle)
adev->gmc.mc_mask = 0xffffffffffULL;
- r = dma_set_mask_and_coherent(adev->dev, DMA_BIT_MASK(44));
+ r = dma_set_mask_and_coherent(adev->dev, DMA_BIT_MASK(40));
if (r) {
dev_warn(adev->dev, "No suitable DMA available.\n");
return r;
}
- adev->need_swiotlb = drm_need_swiotlb(44);
+ adev->need_swiotlb = drm_need_swiotlb(40);
r = gmc_v6_0_init_microcode(adev);
if (r) {
--
2.33.0
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 9af3ef954975c383eeb667aee207d9ce6fbef8c4 ]
commit 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device
tree nodes") added "max-virtual-functions" to have 16 bit values.
Fix "max-virtual-functions" in PCIe endpoint (EP) nodes to have 8 bit
values instead of 16.
Fixes: 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes")
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Reviewed-by: Aswath Govindraju <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 6ffdebd601223..4e010253b028a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -656,7 +656,7 @@
clock-names = "fck";
cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
dma-coherent;
};
@@ -705,7 +705,7 @@
clock-names = "fck";
cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
dma-coherent;
};
@@ -754,7 +754,7 @@
clock-names = "fck";
cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
dma-coherent;
};
@@ -803,7 +803,7 @@
clock-names = "fck";
cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
dma-coherent;
#address-cells = <2>;
#size-cells = <2>;
--
2.33.0
From: Anand Moon <[email protected]>
[ Upstream commit 085675117ecf5e02c4220698fd549024ec64ad2c ]
After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VDDCPU pwm regulator to 12V regulator supply
instead of dummy regulator.
[ 11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property
in node /regulator-vddcpu failed
[ 11.602344] VDDCPU: supplied by regulator-dummy
[ 11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT
[ 11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled
Fixes: e9bc0765cc12 ("arm64: dts: meson-g12a: enable DVFS on G12A boards")
Cc: Neil Armstrong <[email protected]>
Signed-off-by: Anand Moon <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index b00d0468c7534..4d5b3e514b514 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -139,7 +139,7 @@
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
- vin-supply = <&dc_in>;
+ pwm-supply = <&dc_in>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index a26bfe72550fe..4b5d11e56364d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -139,7 +139,7 @@
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
- vin-supply = <&main_12v>;
+ pwm-supply = <&main_12v>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 463a72d6bb7c7..26b5d9327324a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -139,7 +139,7 @@
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
- vin-supply = <&dc_in>;
+ pwm-supply = <&dc_in>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
--
2.33.0
From: Kumar Kartikeya Dwivedi <[email protected]>
[ Upstream commit c3fc706e94f5653def2783ffcd809a38676b7551 ]
Similar to the fix in commit:
e31eec77e4ab ("bpf: selftests: Fix fd cleanup in get_branch_snapshot")
We use designated initializer to set fds to -1 without breaking on
future changes to MAX_SERVER constant denoting the array size.
The particular close(0) occurs on non-reuseport tests, so it can be seen
with -n 115/{2,3} but not 115/4. This can cause problems with future
tests if they depend on BTF fd never being acquired as fd 0, breaking
internal libbpf assumptions.
Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Jakub Sitnicki <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/sk_lookup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/sk_lookup.c b/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
index 45c82db3c58c5..b4c9f4a96ae4d 100644
--- a/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
+++ b/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
@@ -598,7 +598,7 @@ close:
static void run_lookup_prog(const struct test *t)
{
- int server_fds[MAX_SERVERS] = { -1 };
+ int server_fds[] = { [0 ... MAX_SERVERS - 1] = -1 };
int client_fd, reuse_conn_fd = -1;
struct bpf_link *lookup_link;
int i, err;
@@ -1053,7 +1053,7 @@ static void run_sk_assign(struct test_sk_lookup *skel,
struct bpf_program *lookup_prog,
const char *remote_ip, const char *local_ip)
{
- int server_fds[MAX_SERVERS] = { -1 };
+ int server_fds[] = { [0 ... MAX_SERVERS - 1] = -1 };
struct bpf_sk_lookup ctx;
__u64 server_cookie;
int i, err;
--
2.33.0
From: Srikar Dronamraju <[email protected]>
[ Upstream commit a21d1becaa3f17a97b933ffa677b526afc514ec5 ]
Introduce a static branch that would be set during boot if the OS
happens to be a KVM guest. Subsequent checks to see if we are on KVM
will rely on this static branch. This static branch would be used in
vcpu_is_preempted() in a subsequent patch.
Signed-off-by: Srikar Dronamraju <[email protected]>
Acked-by: Waiman Long <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/kvm_guest.h | 10 ++++++++++
arch/powerpc/include/asm/kvm_para.h | 2 +-
arch/powerpc/kernel/firmware.c | 2 ++
3 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/kvm_guest.h b/arch/powerpc/include/asm/kvm_guest.h
index d7749ecb30d49..2fca299f7e192 100644
--- a/arch/powerpc/include/asm/kvm_guest.h
+++ b/arch/powerpc/include/asm/kvm_guest.h
@@ -7,8 +7,18 @@
#define _ASM_POWERPC_KVM_GUEST_H_
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
+#include <linux/jump_label.h>
+
+DECLARE_STATIC_KEY_FALSE(kvm_guest);
+
+static inline bool is_kvm_guest(void)
+{
+ return static_branch_unlikely(&kvm_guest);
+}
+
bool check_kvm_guest(void);
#else
+static inline bool is_kvm_guest(void) { return false; }
static inline bool check_kvm_guest(void) { return false; }
#endif
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index 6fba06b6cfdbc..abe1b5e82547b 100644
--- a/arch/powerpc/include/asm/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -14,7 +14,7 @@
static inline int kvm_para_available(void)
{
- return IS_ENABLED(CONFIG_KVM_GUEST) && check_kvm_guest();
+ return IS_ENABLED(CONFIG_KVM_GUEST) && is_kvm_guest();
}
static inline unsigned int kvm_arch_para_features(void)
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index c3140c6084c93..c9e2819b095ab 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -22,6 +22,7 @@ EXPORT_SYMBOL_GPL(powerpc_firmware_features);
#endif
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
+DEFINE_STATIC_KEY_FALSE(kvm_guest);
bool check_kvm_guest(void)
{
struct device_node *hyper_node;
@@ -33,6 +34,7 @@ bool check_kvm_guest(void)
if (!of_device_is_compatible(hyper_node, "linux,kvm"))
return false;
+ static_branch_enable(&kvm_guest);
return true;
}
#endif
--
2.33.0
From: Michael Ellerman <[email protected]>
[ Upstream commit 95839225639ba7c3d8d7231b542728dcf222bf2d ]
Commit a21d1becaa3f ("powerpc: Reintroduce is_kvm_guest() as a fast-path
check") added is_kvm_guest() and changed kvm_para_available() to use it.
is_kvm_guest() checks a static key, kvm_guest, and that static key is
set in check_kvm_guest().
The problem is check_kvm_guest() is only called on pseries, and even
then only in some configurations. That means is_kvm_guest() always
returns false on all non-pseries and some pseries depending on
configuration. That's a bug.
For PR KVM guests this is noticable because they no longer do live
patching of themselves, which can be detected by the omission of a
message in dmesg such as:
KVM: Live patching for a fast VM worked
To fix it make check_kvm_guest() an initcall, to ensure it's always
called at boot. It needs to be core so that it runs before
kvm_guest_init() which is postcore. To be an initcall it needs to return
int, where 0 means success, so update that.
We still call it manually in pSeries_smp_probe(), because that runs
before init calls are run.
Fixes: a21d1becaa3f ("powerpc: Reintroduce is_kvm_guest() as a fast-path check")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/kvm_guest.h | 4 ++--
arch/powerpc/kernel/firmware.c | 10 ++++++----
arch/powerpc/platforms/pseries/smp.c | 4 +++-
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_guest.h b/arch/powerpc/include/asm/kvm_guest.h
index 2fca299f7e192..c63105d2c9e7c 100644
--- a/arch/powerpc/include/asm/kvm_guest.h
+++ b/arch/powerpc/include/asm/kvm_guest.h
@@ -16,10 +16,10 @@ static inline bool is_kvm_guest(void)
return static_branch_unlikely(&kvm_guest);
}
-bool check_kvm_guest(void);
+int check_kvm_guest(void);
#else
static inline bool is_kvm_guest(void) { return false; }
-static inline bool check_kvm_guest(void) { return false; }
+static inline int check_kvm_guest(void) { return 0; }
#endif
#endif /* _ASM_POWERPC_KVM_GUEST_H_ */
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index c9e2819b095ab..c7022c41cc314 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -23,18 +23,20 @@ EXPORT_SYMBOL_GPL(powerpc_firmware_features);
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
DEFINE_STATIC_KEY_FALSE(kvm_guest);
-bool check_kvm_guest(void)
+int __init check_kvm_guest(void)
{
struct device_node *hyper_node;
hyper_node = of_find_node_by_path("/hypervisor");
if (!hyper_node)
- return false;
+ return 0;
if (!of_device_is_compatible(hyper_node, "linux,kvm"))
- return false;
+ return 0;
static_branch_enable(&kvm_guest);
- return true;
+
+ return 0;
}
+core_initcall(check_kvm_guest); // before kvm_guest_init()
#endif
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 9d596b41ec675..f47429323eee9 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -208,7 +208,9 @@ static __init void pSeries_smp_probe(void)
if (!cpu_has_feature(CPU_FTR_SMT))
return;
- if (check_kvm_guest()) {
+ check_kvm_guest();
+
+ if (is_kvm_guest()) {
/*
* KVM emulates doorbells by disabling FSCR[MSGP] so msgsndp
* faults to the hypervisor which then reads the instruction
--
2.33.0
From: Alex Bee <[email protected]>
[ Upstream commit 932b4610f55b49f3a158b0db451137bab7ed0e1f ]
As can be seen in RK3328's TRM the register range for the GPU is
0xff300000 to 0xff330000.
It would (and does in vendor kernel) overlap with the registers of
the HEVC encoder (node/driver do not exist yet in upstream kernel).
See already existing h265e_mmu node.
Fixes: 752fbc0c8da7 ("arm64: dts: rockchip: add rk3328 mali gpu node")
Signed-off-by: Alex Bee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index e546c9d1d6463..72112fe05a5c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -603,7 +603,7 @@
gpu: gpu@ff300000 {
compatible = "rockchip,rk3328-mali", "arm,mali-450";
- reg = <0x0 0xff300000 0x0 0x40000>;
+ reg = <0x0 0xff300000 0x0 0x30000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
--
2.33.0
From: Anand Moon <[email protected]>
[ Upstream commit 62183863f708c2464769e0d477c8ce9f3d326feb ]
After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VDDCP_A and VDDCPU_B pwm regulator to 12V regulator
supply instead of dummy regulator.
[ 4.147196] VDDCPU_A: will resolve supply early: pwm
[ 4.147216] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply from device tree
[ 4.147227] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply property in node /regulator-vddcpu-a failed
[ 4.147258] VDDCPU_A: supplied by regulator-dummy
[ 4.147288] regulator-dummy: could not add device link regulator.12: -ENOENT
[ 4.147353] VDDCPU_A: 721 <--> 1022 mV at 871 mV, enabled
[ 4.152014] VDDCPU_B: will resolve supply early: pwm
[ 4.152035] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply from device tree
[ 4.152047] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply property in node /regulator-vddcpu-b failed
[ 4.152079] VDDCPU_B: supplied by regulator-dummy
[ 4.152108] regulator-dummy: could not add device link regulator.13: -ENOENT
Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
Fixes: d14734a04a8a ("arm64: dts: meson-g12b-odroid-n2: enable DVFS")
Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")
Cc: Neil Armstrong <[email protected]>
Signed-off-by: Anand Moon <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index f42cf4b8af2d4..16dd409051b40 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -18,7 +18,7 @@
regulator-min-microvolt = <690000>;
regulator-max-microvolt = <1050000>;
- vin-supply = <&dc_in>;
+ pwm-supply = <&dc_in>;
pwms = <&pwm_ab 0 1250 0>;
pwm-dutycycle-range = <100 0>;
@@ -37,7 +37,7 @@
regulator-min-microvolt = <690000>;
regulator-max-microvolt = <1050000>;
- vin-supply = <&vsys_3v3>;
+ pwm-supply = <&vsys_3v3>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 39a09661c5f62..59b5f39088757 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -128,7 +128,7 @@
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
- vin-supply = <&main_12v>;
+ pwm-supply = <&main_12v>;
pwms = <&pwm_ab 0 1250 0>;
pwm-dutycycle-range = <100 0>;
@@ -147,7 +147,7 @@
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
- vin-supply = <&main_12v>;
+ pwm-supply = <&main_12v>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index feb0885047400..b40d2c1002c92 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -96,7 +96,7 @@
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
- vin-supply = <&main_12v>;
+ pwm-supply = <&main_12v>;
pwms = <&pwm_ab 0 1250 0>;
pwm-dutycycle-range = <100 0>;
@@ -115,7 +115,7 @@
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
- vin-supply = <&main_12v>;
+ pwm-supply = <&main_12v>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
--
2.33.0
From: Tong Zhang <[email protected]>
[ Upstream commit cbd9a3347c757383f3d2b50cf7cfd03eb479c481 ]
dc395x_init_one()->adapter_init() might fail. In this case, the acb is
already cleaned up by adapter_init(), no need to do that in
adapter_uninit(acb) again.
[ 1.252251] dc395x: adapter init failed
[ 1.254900] RIP: 0010:adapter_uninit+0x94/0x170 [dc395x]
[ 1.260307] Call Trace:
[ 1.260442] dc395x_init_one.cold+0x72a/0x9bb [dc395x]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Finn Thain <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/dc395x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index fa16894d8758c..6cb48ae8e1241 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -4658,6 +4658,7 @@ static int dc395x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* initialise the adapter and everything we need */
if (adapter_init(acb, io_port_base, io_port_len, irq)) {
dprintkl(KERN_INFO, "adapter init failed\n");
+ acb = NULL;
goto fail;
}
--
2.33.0
From: Nuno Sá <[email protected]>
[ Upstream commit b600bd7eb333554518b4dd36b882b2ae58a5149e ]
With commit ecb010d441088 ("iio: imu: adis: Refactor adis_initial_startup")
we are doing a HW or SW reset to the device which means that we'll get
the default state of the data ready pin (which is enabled). Hence there's
no point in disabling the IRQ in the init function. Moreover, this
function is intended to initialize internal data structures and not
really do anything on the device.
As a result of this, some devices were left with the data ready pin enabled
after probe which was not the desired behavior. Thus, we move the call to
'adis_enable_irq()' to the initial startup function where it makes more
sense for it to be.
Note that for devices that cannot mask/unmask the pin, it makes no sense
to call the function at this point since the IRQ should not have been
yet requested. This will be improved in a follow up change.
Fixes: ecb010d441088 ("iio: imu: adis: Refactor adis_initial_startup")
Signed-off-by: Nuno Sá <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/imu/adis.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index f8b7837d8b8f6..715eef81bc248 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -434,6 +434,8 @@ int __adis_initial_startup(struct adis *adis)
if (ret)
return ret;
+ adis_enable_irq(adis, false);
+
if (!adis->data->prod_id_reg)
return 0;
@@ -530,7 +532,7 @@ int adis_init(struct adis *adis, struct iio_dev *indio_dev,
adis->current_page = 0;
}
- return adis_enable_irq(adis, false);
+ return 0;
}
EXPORT_SYMBOL_GPL(adis_init);
--
2.33.0
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit b6ca770ae7f2c560a29bbd02c4e3d734fafaf804 ]
UFS drivers that probe defer will end up leaking memory allocated for clk
and regulator names via kstrdup() because the structure that is holding
this memory is allocated via devm_* variants which will be freed during
probe defer but the names are never freed.
Use same devm_* variant of kstrdup to free the memory allocated to name
when driver probe defers.
Kmemleak found around 11 leaks on Qualcomm Dragon Board RB5:
unreferenced object 0xffff66f243fb2c00 (size 128):
comm "kworker/u16:0", pid 7, jiffies 4294893319 (age 94.848s)
hex dump (first 32 bytes):
63 6f 72 65 5f 63 6c 6b 00 76 69 72 74 75 61 6c core_clk.virtual
2f 77 6f 72 6b 71 75 65 75 65 2f 73 63 73 69 5f /workqueue/scsi_
backtrace:
[<000000006f788cd1>] slab_post_alloc_hook+0x88/0x410
[<00000000cfd1372b>] __kmalloc_track_caller+0x138/0x230
[<00000000a92ab17b>] kstrdup+0xb0/0x110
[<0000000037263ab6>] ufshcd_pltfrm_init+0x1a8/0x500
[<00000000a20a5caa>] ufs_qcom_probe+0x20/0x58
[<00000000a5e43067>] platform_probe+0x6c/0x118
[<00000000ef686e3f>] really_probe+0xc4/0x330
[<000000005b18792c>] __driver_probe_device+0x88/0x118
[<00000000a5d295e8>] driver_probe_device+0x44/0x158
[<000000007e83f58d>] __device_attach_driver+0xb4/0x128
[<000000004bfa4470>] bus_for_each_drv+0x68/0xd0
[<00000000b89a83bc>] __device_attach+0xec/0x170
[<00000000ada2beea>] device_initial_probe+0x14/0x20
[<0000000079921612>] bus_probe_device+0x9c/0xa8
[<00000000d268bf7c>] deferred_probe_work_func+0x90/0xd0
[<000000009ef64bfa>] process_one_work+0x29c/0x788
unreferenced object 0xffff66f243fb2c80 (size 128):
comm "kworker/u16:0", pid 7, jiffies 4294893319 (age 94.848s)
hex dump (first 32 bytes):
62 75 73 5f 61 67 67 72 5f 63 6c 6b 00 00 00 00 bus_aggr_clk....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
With this patch no memory leaks are reported.
Link: https://lore.kernel.org/r/[email protected]
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Fixes: c6e79dacd86f ("ufs: Add clock initialization support")
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd-pltfrm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 68ce209577eca..8c92d1bde64be 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -91,7 +91,7 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
clki->min_freq = clkfreq[i];
clki->max_freq = clkfreq[i+1];
- clki->name = kstrdup(name, GFP_KERNEL);
+ clki->name = devm_kstrdup(dev, name, GFP_KERNEL);
if (!strcmp(name, "ref_clk"))
clki->keep_link_active = true;
dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
@@ -127,7 +127,7 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name,
if (!vreg)
return -ENOMEM;
- vreg->name = kstrdup(name, GFP_KERNEL);
+ vreg->name = devm_kstrdup(dev, name, GFP_KERNEL);
snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
if (of_property_read_u32(np, prop_name, &vreg->max_uA)) {
--
2.33.0
From: Can Guo <[email protected]>
[ Upstream commit 81309c247a4dcd597cbda5254fd0afdd61b93f14 ]
Remove the param skip_ref_clk from __ufshcd_setup_clocks(), but keep a flag
in struct ufs_clk_info to tell whether a clock can be disabled or not while
the link is active.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hongwu Su <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Reviewed-by: Stanley Chu <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 ++
drivers/scsi/ufs/ufshcd.c | 29 +++++++++--------------------
drivers/scsi/ufs/ufshcd.h | 3 +++
3 files changed, 14 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 24927cf485b47..68ce209577eca 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -92,6 +92,8 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
clki->min_freq = clkfreq[i];
clki->max_freq = clkfreq[i+1];
clki->name = kstrdup(name, GFP_KERNEL);
+ if (!strcmp(name, "ref_clk"))
+ clki->keep_link_active = true;
dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
clki->min_freq, clki->max_freq, clki->name);
list_add_tail(&clki->list, &hba->clk_list_head);
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 3139d9df6f320..930f35863cbb5 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -221,8 +221,6 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd);
static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
static void ufshcd_hba_exit(struct ufs_hba *hba);
static int ufshcd_probe_hba(struct ufs_hba *hba, bool async);
-static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
- bool skip_ref_clk);
static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
@@ -1714,11 +1712,7 @@ static void ufshcd_gate_work(struct work_struct *work)
ufshcd_disable_irq(hba);
- if (!ufshcd_is_link_active(hba))
- ufshcd_setup_clocks(hba, false);
- else
- /* If link is active, device ref_clk can't be switched off */
- __ufshcd_setup_clocks(hba, false, true);
+ ufshcd_setup_clocks(hba, false);
/*
* In case you are here to cancel this work the gating state
@@ -8055,8 +8049,7 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
return 0;
}
-static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
- bool skip_ref_clk)
+static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
{
int ret = 0;
struct ufs_clk_info *clki;
@@ -8074,7 +8067,12 @@ static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
list_for_each_entry(clki, head, list) {
if (!IS_ERR_OR_NULL(clki->clk)) {
- if (skip_ref_clk && !strcmp(clki->name, "ref_clk"))
+ /*
+ * Don't disable clocks which are needed
+ * to keep the link active.
+ */
+ if (ufshcd_is_link_active(hba) &&
+ clki->keep_link_active)
continue;
clk_state_changed = on ^ clki->enabled;
@@ -8119,11 +8117,6 @@ out:
return ret;
}
-static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
-{
- return __ufshcd_setup_clocks(hba, on, false);
-}
-
static int ufshcd_init_clocks(struct ufs_hba *hba)
{
int ret = 0;
@@ -8642,11 +8635,7 @@ disable_clks:
*/
ufshcd_disable_irq(hba);
- if (!ufshcd_is_link_active(hba))
- ufshcd_setup_clocks(hba, false);
- else
- /* If link is active, device ref_clk can't be switched off */
- __ufshcd_setup_clocks(hba, false, true);
+ ufshcd_setup_clocks(hba, false);
if (ufshcd_is_clkgating_allowed(hba)) {
hba->clk_gating.state = CLKS_OFF;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 812aa348751eb..1ba9c786feb6d 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -229,6 +229,8 @@ struct ufs_dev_cmd {
* @max_freq: maximum frequency supported by the clock
* @min_freq: min frequency that can be used for clock scaling
* @curr_freq: indicates the current frequency that it is set to
+ * @keep_link_active: indicates that the clk should not be disabled if
+ link is active
* @enabled: variable to check against multiple enable/disable
*/
struct ufs_clk_info {
@@ -238,6 +240,7 @@ struct ufs_clk_info {
u32 max_freq;
u32 min_freq;
u32 curr_freq;
+ bool keep_link_active;
bool enabled;
};
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit f4875d509a0a78ad294a1a538d534b5ba94e685a ]
This variable is just a temporary variable, used to do an endian
conversion. The problem is that the last byte is not initialized. After
the conversion is completely done, the last byte is discarded so it doesn't
cause a problem. But static checkers and the KMSan runtime checker can
detect the uninitialized read and will complain about it.
Link: https://lore.kernel.org/r/20211006073242.GA8404@kili
Fixes: 5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/csiostor/csio_lnode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index dc98f51f466fb..d5ac938970232 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -619,7 +619,7 @@ csio_ln_vnp_read_cbfn(struct csio_hw *hw, struct csio_mb *mbp)
struct fc_els_csp *csp;
struct fc_els_cssp *clsp;
enum fw_retval retval;
- __be32 nport_id;
+ __be32 nport_id = 0;
retval = FW_CMD_RETVAL_G(ntohl(rsp->alloc_to_len16));
if (retval != FW_SUCCESS) {
--
2.33.0
From: Amelie Delaunay <[email protected]>
[ Upstream commit 8d387f61b0240854e81450c261beb775065bad5d ]
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of
the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG).
The clock is then enabled on udc_start.
If dwc2_drd_role_sw_set is called before udc_start (it is the case if the
usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be
read/written, so session cannot be overridden.
To avoid this case, check the ll_hw_enabled value and enable the clock if
it is available, and disable it after the override.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/drd.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
index 80eae88d76dda..99672360f34b0 100644
--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -7,6 +7,7 @@
* Author(s): Amelie Delaunay <[email protected]>
*/
+#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/platform_device.h>
#include <linux/usb/role.h>
@@ -86,6 +87,20 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
}
#endif
+ /*
+ * In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of
+ * the probe and enabled on udc_start.
+ * If role-switch set is called before the udc_start, we need to enable
+ * the clock to read/write GOTGCTL and GUSBCFG registers to override
+ * mode and sessions. It is the case if cable is plugged at boot.
+ */
+ if (!hsotg->ll_hw_enabled && hsotg->clk) {
+ int ret = clk_prepare_enable(hsotg->clk);
+
+ if (ret)
+ return ret;
+ }
+
spin_lock_irqsave(&hsotg->lock, flags);
if (role == USB_ROLE_HOST) {
@@ -110,6 +125,9 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
/* This will raise a Connector ID Status Change Interrupt */
dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
+ if (!hsotg->ll_hw_enabled && hsotg->clk)
+ clk_disable_unprepare(hsotg->clk);
+
dev_dbg(hsotg->dev, "%s-session valid\n",
role == USB_ROLE_NONE ? "No" :
role == USB_ROLE_HOST ? "A" : "B");
--
2.33.0
From: Amelie Delaunay <[email protected]>
[ Upstream commit b2cab2a24fb5d13ce1d384ecfb6de827fa08a048 ]
Instead of forcing the role to Device, check the dr_mode configuration.
If the core is Host only, force the mode to Host, this to avoid the
dwc2_force_mode warning:
WARNING: CPU: 1 PID: 21 at drivers/usb/dwc2/core.c:615 dwc2_drd_init+0x104/0x17c
When forcing mode to Host, dwc2_force_mode may sleep the time the host
role is applied. To avoid sleeping while atomic context, move the call
to dwc2_force_mode after spin_unlock_irqrestore. It is safe, as
interrupts are not yet unmasked here.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/drd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
index 2d4176f5788eb..80eae88d76dda 100644
--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -25,9 +25,9 @@ static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
dwc2_writel(hsotg, gotgctl, GOTGCTL);
- dwc2_force_mode(hsotg, false);
-
spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST));
}
static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
--
2.33.0
From: Stefan Agner <[email protected]>
[ Upstream commit 6d0d1b5a1b4870911beb89544ec1a9751c42fec7 ]
If the device used as a serial console gets detached/attached at runtime,
register_console() will try to call imx_uart_setup_console(), but this
is not possible since it is marked as __init.
For instance
# cat /sys/devices/virtual/tty/console/active
tty1 ttymxc0
# echo -n N > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console
# echo -n Y > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console
[ 73.166649] 8<--- cut here ---
[ 73.167005] Unable to handle kernel paging request at virtual address c154d928
[ 73.167601] pgd = 55433e84
[ 73.167875] [c154d928] *pgd=8141941e(bad)
[ 73.168304] Internal error: Oops: 8000000d [#1] SMP ARM
[ 73.168429] Modules linked in:
[ 73.168522] CPU: 0 PID: 536 Comm: sh Not tainted 5.15.0-rc6-00056-g3968ddcf05fb #3
[ 73.168675] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 73.168791] PC is at imx_uart_console_setup+0x0/0x238
[ 73.168927] LR is at try_enable_new_console+0x98/0x124
[ 73.169056] pc : [<c154d928>] lr : [<c0196f44>] psr: a0000013
[ 73.169178] sp : c2ef5e70 ip : 00000000 fp : 00000000
[ 73.169281] r10: 00000000 r9 : c02cf970 r8 : 00000000
[ 73.169389] r7 : 00000001 r6 : 00000001 r5 : c1760164 r4 : c1e0fb08
[ 73.169512] r3 : c154d928 r2 : 00000000 r1 : efffcbd1 r0 : c1760164
[ 73.169641] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 73.169782] Control: 10c5387d Table: 8345406a DAC: 00000051
[ 73.169895] Register r0 information: non-slab/vmalloc memory
[ 73.170032] Register r1 information: non-slab/vmalloc memory
[ 73.170158] Register r2 information: NULL pointer
[ 73.170273] Register r3 information: non-slab/vmalloc memory
[ 73.170397] Register r4 information: non-slab/vmalloc memory
[ 73.170521] Register r5 information: non-slab/vmalloc memory
[ 73.170647] Register r6 information: non-paged memory
[ 73.170771] Register r7 information: non-paged memory
[ 73.170892] Register r8 information: NULL pointer
[ 73.171009] Register r9 information: non-slab/vmalloc memory
[ 73.171142] Register r10 information: NULL pointer
[ 73.171259] Register r11 information: NULL pointer
[ 73.171375] Register r12 information: NULL pointer
[ 73.171494] Process sh (pid: 536, stack limit = 0xcd1ba82f)
[ 73.171621] Stack: (0xc2ef5e70 to 0xc2ef6000)
[ 73.171731] 5e60: ???????? ???????? ???????? ????????
[ 73.171899] 5e80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172059] 5ea0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172217] 5ec0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172377] 5ee0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172537] 5f00: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172698] 5f20: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172856] 5f40: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173016] 5f60: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173177] 5f80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173336] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173496] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173654] 5fe0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173826] [<c0196f44>] (try_enable_new_console) from [<c01984a8>] (register_console+0x10c/0x2ec)
[ 73.174053] [<c01984a8>] (register_console) from [<c06e2c90>] (console_store+0x14c/0x168)
[ 73.174262] [<c06e2c90>] (console_store) from [<c0383718>] (kernfs_fop_write_iter+0x110/0x1cc)
[ 73.174470] [<c0383718>] (kernfs_fop_write_iter) from [<c02cf5f4>] (vfs_write+0x31c/0x548)
[ 73.174679] [<c02cf5f4>] (vfs_write) from [<c02cf970>] (ksys_write+0x60/0xec)
[ 73.174863] [<c02cf970>] (ksys_write) from [<c0100080>] (ret_fast_syscall+0x0/0x1c)
[ 73.175052] Exception stack(0xc2ef5fa8 to 0xc2ef5ff0)
[ 73.175167] 5fa0: ???????? ???????? ???????? ???????? ???????? ????????
[ 73.175327] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.175486] 5fe0: ???????? ???????? ???????? ????????
[ 73.175608] Code: 00000000 00000000 00000000 00000000 (00000000)
[ 73.175744] ---[ end trace 9b75121265109bf1 ]---
A similar issue could be triggered by unbinding/binding the serial
console device [*].
Drop __init so that imx_uart_setup_console() can be safely called at
runtime.
[*] https://lore.kernel.org/all/[email protected]/
Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Stefan Agner <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/imx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index cacf7266a262d..28cc328ddb6eb 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2049,7 +2049,7 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
* If the port was already initialised (eg, by a boot loader),
* try to determine the current setup.
*/
-static void __init
+static void
imx_uart_console_get_options(struct imx_port *sport, int *baud,
int *parity, int *bits)
{
@@ -2108,7 +2108,7 @@ imx_uart_console_get_options(struct imx_port *sport, int *baud,
}
}
-static int __init
+static int
imx_uart_console_setup(struct console *co, char *options)
{
struct imx_port *sport;
--
2.33.0
From: Anssi Hannula <[email protected]>
[ Upstream commit 88b20f84f0fe47409342669caf3e58a3fc64c316 ]
xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid
any previous TXEVENT event asserting the UART interrupt. This clear
operation is done immediately after filling the TX FIFO.
However, if the bytes inserted by cdns_uart_handle_tx() are consumed by
the UART before the TXEMPTY is cleared, the clear operation eats the new
TXEMPTY event as well, causing cdns_uart_isr() to never receive the
TXEMPTY event. If there are bytes still queued in circbuf, TX will get
stuck as they will never get transferred to FIFO (unless new bytes are
queued to circbuf in which case .start_tx() is called again).
While the racy missed TXEMPTY occurs fairly often with short data
sequences (e.g. write 1 byte), in those cases circbuf is usually empty
so no action on TXEMPTY would have been needed anyway. On the other
hand, longer data sequences make the race much more unlikely as UART
takes longer to consume the TX FIFO. Therefore it is rare for this race
to cause visible issues in general.
Fix the race by clearing the TXEMPTY bit in ISR *before* filling the
FIFO.
The TXEMPTY bit in ISR will only get asserted at the exact moment the
TX FIFO *becomes* empty, so clearing the bit before filling FIFO does
not cause an extra immediate assertion even if the FIFO is initially
empty.
This is hard to reproduce directly on a normal system, but inserting
e.g. udelay(200) after cdns_uart_handle_tx(port), setting 4000000 baud,
and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50"
reliably reproduces the issue on my ZynqMP test system unless this fix
is applied.
Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size")
Signed-off-by: Anssi Hannula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index a9b1ee27183a7..b5a8afbc452ba 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -601,9 +601,10 @@ static void cdns_uart_start_tx(struct uart_port *port)
if (uart_circ_empty(&port->state->xmit))
return;
+ writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
+
cdns_uart_handle_tx(port);
- writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
/* Enable the TX Empty interrupt */
writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
}
--
2.33.0
From: Rahul Tanwar <[email protected]>
[ Upstream commit 53b3947ddb7f309d1f611f8dc9bfd6ea9d699907 ]
Ignore the same function with multiple groups.
Fix a typo in error print.
Fixes: 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
Signed-off-by: Rahul Tanwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-equilibrium.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-equilibrium.c b/drivers/pinctrl/pinctrl-equilibrium.c
index ac1c47f542c11..3b6dcaa80e000 100644
--- a/drivers/pinctrl/pinctrl-equilibrium.c
+++ b/drivers/pinctrl/pinctrl-equilibrium.c
@@ -674,6 +674,11 @@ static int eqbr_build_functions(struct eqbr_pinctrl_drv_data *drvdata)
return ret;
for (i = 0; i < nr_funcs; i++) {
+
+ /* Ignore the same function with multiple groups */
+ if (funcs[i].name == NULL)
+ continue;
+
ret = pinmux_generic_add_function(drvdata->pctl_dev,
funcs[i].name,
funcs[i].groups,
@@ -805,7 +810,7 @@ static int pinctrl_reg(struct eqbr_pinctrl_drv_data *drvdata)
ret = eqbr_build_functions(drvdata);
if (ret) {
- dev_err(dev, "Failed to build groups\n");
+ dev_err(dev, "Failed to build functions\n");
return ret;
}
--
2.33.0
From: Claudiu Beznea <[email protected]>
[ Upstream commit f12d028b743bb6136da60b17228a1b6162886444 ]
Use DIV_ROUND_CLOSEST_ULL() to avoid any inconsistency b/w the rate
computed in sam9x60_frac_pll_recalc_rate() and the one computed in
sam9x60_frac_pll_compute_mul_frac().
Fixes: 43b1bb4a9b3e1 ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs")
Signed-off-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/at91/clk-sam9x60-pll.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index 78f458a7b2ef4..5a9daa3643a72 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -71,8 +71,8 @@ static unsigned long sam9x60_frac_pll_recalc_rate(struct clk_hw *hw,
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct sam9x60_frac *frac = to_sam9x60_frac(core);
- return (parent_rate * (frac->mul + 1) +
- ((u64)parent_rate * frac->frac >> 22));
+ return parent_rate * (frac->mul + 1) +
+ DIV_ROUND_CLOSEST_ULL((u64)parent_rate * frac->frac, (1 << 22));
}
static int sam9x60_frac_pll_prepare(struct clk_hw *hw)
--
2.33.0
From: Richard Fitzgerald <[email protected]>
[ Upstream commit ab78322a0dc8e5e472ff66ac7e18c94acc17587f ]
Use the device_property APIs so that the code will work on devicetree
and ACPI systems.
Signed-off-by: Richard Fitzgerald <[email protected]>
Signed-off-by: Lucas Tanure <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 60 +++++++++++++++-----------------------
1 file changed, 24 insertions(+), 36 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index eb1fcc5be0573..e56d3c9c39756 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -20,10 +20,9 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -1554,17 +1553,15 @@ static const unsigned int threshold_defaults[] = {
CS42L42_HS_DET_LEVEL_1
};
-static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
+static int cs42l42_handle_device_data(struct device *dev,
struct cs42l42_private *cs42l42)
{
- struct device_node *np = i2c_client->dev.of_node;
unsigned int val;
- unsigned int thresholds[CS42L42_NUM_BIASES];
+ u32 thresholds[CS42L42_NUM_BIASES];
int ret;
int i;
- ret = of_property_read_u32(np, "cirrus,ts-inv", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,ts-inv", &val);
if (!ret) {
switch (val) {
case CS42L42_TS_INV_EN:
@@ -1572,7 +1569,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->ts_inv = val;
break;
default:
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,ts-inv DT value %d\n",
val);
cs42l42->ts_inv = CS42L42_TS_INV_DIS;
@@ -1585,8 +1582,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
CS42L42_TS_INV_MASK,
(cs42l42->ts_inv << CS42L42_TS_INV_SHIFT));
- ret = of_property_read_u32(np, "cirrus,ts-dbnc-rise", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,ts-dbnc-rise", &val);
if (!ret) {
switch (val) {
case CS42L42_TS_DBNCE_0:
@@ -1600,7 +1596,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->ts_dbnc_rise = val;
break;
default:
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,ts-dbnc-rise DT value %d\n",
val);
cs42l42->ts_dbnc_rise = CS42L42_TS_DBNCE_1000;
@@ -1614,8 +1610,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
(cs42l42->ts_dbnc_rise <<
CS42L42_TS_RISE_DBNCE_TIME_SHIFT));
- ret = of_property_read_u32(np, "cirrus,ts-dbnc-fall", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,ts-dbnc-fall", &val);
if (!ret) {
switch (val) {
case CS42L42_TS_DBNCE_0:
@@ -1629,7 +1624,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->ts_dbnc_fall = val;
break;
default:
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,ts-dbnc-fall DT value %d\n",
val);
cs42l42->ts_dbnc_fall = CS42L42_TS_DBNCE_0;
@@ -1643,13 +1638,12 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
(cs42l42->ts_dbnc_fall <<
CS42L42_TS_FALL_DBNCE_TIME_SHIFT));
- ret = of_property_read_u32(np, "cirrus,btn-det-init-dbnce", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,btn-det-init-dbnce", &val);
if (!ret) {
if (val <= CS42L42_BTN_DET_INIT_DBNCE_MAX)
cs42l42->btn_det_init_dbnce = val;
else {
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,btn-det-init-dbnce DT value %d\n",
val);
cs42l42->btn_det_init_dbnce =
@@ -1660,14 +1654,13 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
CS42L42_BTN_DET_INIT_DBNCE_DEFAULT;
}
- ret = of_property_read_u32(np, "cirrus,btn-det-event-dbnce", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,btn-det-event-dbnce", &val);
if (!ret) {
if (val <= CS42L42_BTN_DET_EVENT_DBNCE_MAX)
cs42l42->btn_det_event_dbnce = val;
else {
- dev_err(&i2c_client->dev,
- "Wrong cirrus,btn-det-event-dbnce DT value %d\n", val);
+ dev_err(dev,
+ "Wrong cirrus,btn-det-event-dbnce DT value %d\n", val);
cs42l42->btn_det_event_dbnce =
CS42L42_BTN_DET_EVENT_DBNCE_DEFAULT;
}
@@ -1676,19 +1669,17 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
CS42L42_BTN_DET_EVENT_DBNCE_DEFAULT;
}
- ret = of_property_read_u32_array(np, "cirrus,bias-lvls",
- (u32 *)thresholds, CS42L42_NUM_BIASES);
-
+ ret = device_property_read_u32_array(dev, "cirrus,bias-lvls",
+ thresholds, ARRAY_SIZE(thresholds));
if (!ret) {
for (i = 0; i < CS42L42_NUM_BIASES; i++) {
if (thresholds[i] <= CS42L42_HS_DET_LEVEL_MAX)
cs42l42->bias_thresholds[i] = thresholds[i];
else {
- dev_err(&i2c_client->dev,
- "Wrong cirrus,bias-lvls[%d] DT value %d\n", i,
+ dev_err(dev,
+ "Wrong cirrus,bias-lvls[%d] DT value %d\n", i,
thresholds[i]);
- cs42l42->bias_thresholds[i] =
- threshold_defaults[i];
+ cs42l42->bias_thresholds[i] = threshold_defaults[i];
}
}
} else {
@@ -1696,8 +1687,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->bias_thresholds[i] = threshold_defaults[i];
}
- ret = of_property_read_u32(np, "cirrus,hs-bias-ramp-rate", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,hs-bias-ramp-rate", &val);
if (!ret) {
switch (val) {
case CS42L42_HSBIAS_RAMP_FAST_RISE_SLOW_FALL:
@@ -1717,7 +1707,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->hs_bias_ramp_time = CS42L42_HSBIAS_RAMP_TIME3;
break;
default:
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,hs-bias-ramp-rate DT value %d\n",
val);
cs42l42->hs_bias_ramp_rate = CS42L42_HSBIAS_RAMP_SLOW;
@@ -1848,11 +1838,9 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
(1 << CS42L42_ADC_PDN_SHIFT) |
(0 << CS42L42_PDN_ALL_SHIFT));
- if (i2c_client->dev.of_node) {
- ret = cs42l42_handle_device_data(i2c_client, cs42l42);
- if (ret != 0)
- goto err_disable;
- }
+ ret = cs42l42_handle_device_data(&i2c_client->dev, cs42l42);
+ if (ret != 0)
+ goto err_disable;
/* Setup headset detection */
cs42l42_setup_hs_type_detect(cs42l42);
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit fde1fbedbaed4e76cef4600d775b185f59b9b568 ]
The kconfig symbol GENERIC_PHY says:
All the users of this framework should select this config.
and around 136 out of 138 drivers do so, so change USB_MUSB_MEDIATEK
to do so also.
This (also) fixes a long circular dependency problem for an upcoming
patch.
Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Cc: Bin Liu <[email protected]>
Cc: Min Guo <[email protected]>
Cc: Yonglong Wu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: [email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/musb/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 8de143807c1ae..4d61df6a9b5c8 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -120,7 +120,7 @@ config USB_MUSB_MEDIATEK
tristate "MediaTek platforms"
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on NOP_USB_XCEIV
- depends on GENERIC_PHY
+ select GENERIC_PHY
select USB_ROLE_SWITCH
comment "MUSB DMA mode"
--
2.33.0
From: Lucas Tanure <[email protected]>
[ Upstream commit 1abca8e1c77bd9c5f5c0bed21c5b075b6852a178 ]
In case of cs42l42_i2c_probe() fail, the regulators were left enabled.
Signed-off-by: Lucas Tanure <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 191431868c678..eb1fcc5be0573 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1781,8 +1781,10 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
/* Reset the Device */
cs42l42->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev,
"reset", GPIOD_OUT_LOW);
- if (IS_ERR(cs42l42->reset_gpio))
- return PTR_ERR(cs42l42->reset_gpio);
+ if (IS_ERR(cs42l42->reset_gpio)) {
+ ret = PTR_ERR(cs42l42->reset_gpio);
+ goto err_disable;
+ }
if (cs42l42->reset_gpio) {
dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
@@ -1817,13 +1819,13 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
dev_err(&i2c_client->dev,
"CS42L42 Device ID (%X). Expected %X\n",
devid, CS42L42_CHIP_ID);
- return ret;
+ goto err_disable;
}
ret = regmap_read(cs42l42->regmap, CS42L42_REVID, ®);
if (ret < 0) {
dev_err(&i2c_client->dev, "Get Revision ID failed\n");
- return ret;
+ goto err_disable;
}
dev_info(&i2c_client->dev,
@@ -1849,7 +1851,7 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
if (i2c_client->dev.of_node) {
ret = cs42l42_handle_device_data(i2c_client, cs42l42);
if (ret != 0)
- return ret;
+ goto err_disable;
}
/* Setup headset detection */
--
2.33.0
From: Andrej Shadura <[email protected]>
[ Upstream commit b7abf78b7a6c4a29a6e0ba0bb883fe44a2f3d693 ]
The previous commit fixed handling of incomplete packets but broke error
handling: offsetof returns an unsigned value (size_t), but when compared
against the signed return value, the return value is interpreted as if
it were unsigned, so negative return values are never less than the
offset.
To make the code easier to read, calculate the minimal packet length
once and separately, and assign it to a signed int variable to eliminate
unsigned math and the need for type casts. It then becomes immediately
obvious how the actual data length is calculated and why the return
value cannot be less than the minimal length.
Fixes: 22d65765f211 ("HID: u2fzero: ignore incomplete packets without data")
Fixes: 42337b9d4d95 ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-u2fzero.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-u2fzero.c b/drivers/hid/hid-u2fzero.c
index d70cd3d7f583b..94f78ffb76d04 100644
--- a/drivers/hid/hid-u2fzero.c
+++ b/drivers/hid/hid-u2fzero.c
@@ -191,6 +191,8 @@ static int u2fzero_rng_read(struct hwrng *rng, void *data,
struct u2f_hid_msg resp;
int ret;
size_t actual_length;
+ /* valid packets must have a correct header */
+ int min_length = offsetof(struct u2f_hid_msg, init.data);
if (!dev->present) {
hid_dbg(dev->hdev, "device not present");
@@ -200,12 +202,12 @@ static int u2fzero_rng_read(struct hwrng *rng, void *data,
ret = u2fzero_recv(dev, &req, &resp);
/* ignore errors or packets without data */
- if (ret < offsetof(struct u2f_hid_msg, init.data))
+ if (ret < min_length)
return 0;
/* only take the minimum amount of data it is safe to take */
- actual_length = min3((size_t)ret - offsetof(struct u2f_hid_msg,
- init.data), U2F_HID_MSG_LEN(resp), max);
+ actual_length = min3((size_t)ret - min_length,
+ U2F_HID_MSG_LEN(resp), max);
memcpy(data, resp.init.data, actual_length);
--
2.33.0
From: Leon Romanovsky <[email protected]>
[ Upstream commit f4e56ec4452f48b8292dcf0e1c4bdac83506fb8b ]
The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.
Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx4/qp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 6bc0818f4b2c6..c6a815a705fef 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1099,8 +1099,10 @@ static int create_qp_common(struct ib_pd *pd, struct ib_qp_init_attr *init_attr,
if (dev->steering_support ==
MLX4_STEERING_MODE_DEVICE_MANAGED)
qp->flags |= MLX4_IB_QP_NETIF;
- else
+ else {
+ err = -EINVAL;
goto err;
+ }
}
err = set_kernel_sq_size(dev, &init_attr->cap, qp_type, qp);
--
2.33.0
From: Bixuan Cui <[email protected]>
[ Upstream commit 290fe8aa69ef5c51c778c0bb33f8ef0181c769f5 ]
Early exits from for_each_compatible_node() should decrement the
node reference counter. Reported by Coccinelle:
./arch/powerpc/platforms/44x/fsp2.c:206:1-25: WARNING: Function
"for_each_compatible_node" should have of_node_put() before return
around line 218.
Fixes: 7813043e1bbc ("powerpc/44x/fsp2: Add irq error handlers")
Signed-off-by: Bixuan Cui <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/44x/fsp2.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/44x/fsp2.c b/arch/powerpc/platforms/44x/fsp2.c
index b299e43f5ef94..823397c802def 100644
--- a/arch/powerpc/platforms/44x/fsp2.c
+++ b/arch/powerpc/platforms/44x/fsp2.c
@@ -208,6 +208,7 @@ static void node_irq_request(const char *compat, irq_handler_t errirq_handler)
if (irq == NO_IRQ) {
pr_err("device tree node %pOFn is missing a interrupt",
np);
+ of_node_put(np);
return;
}
@@ -215,6 +216,7 @@ static void node_irq_request(const char *compat, irq_handler_t errirq_handler)
if (rc) {
pr_err("fsp_of_probe: request_irq failed: np=%pOF rc=%d",
np, rc);
+ of_node_put(np);
return;
}
}
--
2.33.0
From: Sandeep Maheswaram <[email protected]>
[ Upstream commit b475bf0ec40a2b13fb32ef62f5706576d5858460 ]
The FSEL_MASK which selects the refclock is defined incorrectly.
It should be [4:6] not [5:7]. Due to this incorrect definition, the BIT(7)
in USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 is reset which keeps PHY analog
blocks ON during suspend.
Fix this issue by correctly defining the FSEL_MASK.
Fixes: 51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs")
Signed-off-by: Sandeep Maheswaram <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index ae4bac024c7b1..7e61202aa234e 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -33,7 +33,7 @@
#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54)
#define RETENABLEN BIT(3)
-#define FSEL_MASK GENMASK(7, 5)
+#define FSEL_MASK GENMASK(6, 4)
#define FSEL_DEFAULT (0x3 << 4)
#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58)
--
2.33.0
From: Andrej Shadura <[email protected]>
[ Upstream commit 43775e62c4b784f44a159e13ba80e6146a42d502 ]
The wait_for_completion_timeout function returns 0 if timed out or a
positive value if completed. Hence, "less than zero" comparison always
misses timeouts and doesn't kill the URB as it should, leading to
re-sending it while it is active.
Fixes: 42337b9d4d95 ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-u2fzero.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-u2fzero.c b/drivers/hid/hid-u2fzero.c
index 94f78ffb76d04..67ae2b18e33ac 100644
--- a/drivers/hid/hid-u2fzero.c
+++ b/drivers/hid/hid-u2fzero.c
@@ -132,7 +132,7 @@ static int u2fzero_recv(struct u2fzero_device *dev,
ret = (wait_for_completion_timeout(
&ctx.done, msecs_to_jiffies(USB_CTRL_SET_TIMEOUT)));
- if (ret < 0) {
+ if (ret == 0) {
usb_kill_urb(dev->urb);
hid_err(hdev, "urb submission timed out");
} else {
--
2.33.0
From: Vladimir Zapolskiy <[email protected]>
[ Upstream commit bf7ffcd0069d30e2e7ba2b827f08c89f471cd1f3 ]
On success nvmem_cell_read() returns a pointer to a dynamically allocated
buffer, and therefore it shall be freed after usage.
The issue is reported by kmemleak:
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff3b3803e4b280 (size 128):
comm "kworker/u16:1", pid 107, jiffies 4294892861 (age 94.120s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000007739afdc>] __kmalloc+0x27c/0x41c
[<0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0
[<00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc
[<00000000fc81fcfa>] phy_init+0x70/0x110
[<00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234
[<0000000027d1dbd4>] dwc3_core_init+0x68/0x990
[<000000001965faf9>] dwc3_probe+0x4f4/0x730
[<000000002f7617ca>] platform_probe+0x74/0xf0
[<00000000a2576cac>] really_probe+0xc4/0x470
[<00000000bc77f2c5>] __driver_probe_device+0x11c/0x190
[<00000000130db71f>] driver_probe_device+0x48/0x110
[<0000000019f36c2b>] __device_attach_driver+0xa4/0x140
[<00000000e5812ff7>] bus_for_each_drv+0x84/0xe0
[<00000000f4bac574>] __device_attach+0xe4/0x1c0
[<00000000d3beb631>] device_initial_probe+0x20/0x30
[<000000008019b9db>] bus_probe_device+0xa4/0xb0
Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Vladimir Zapolskiy <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 557547dabfd50..f531043ec3deb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -474,7 +474,7 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
{
struct device *dev = &qphy->phy->dev;
const struct qusb2_phy_cfg *cfg = qphy->cfg;
- u8 *val;
+ u8 *val, hstx_trim;
/* efuse register is optional */
if (!qphy->cell)
@@ -488,7 +488,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
* set while configuring the phy.
*/
val = nvmem_cell_read(qphy->cell, NULL);
- if (IS_ERR(val) || !val[0]) {
+ if (IS_ERR(val)) {
+ dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
+ return;
+ }
+ hstx_trim = val[0];
+ kfree(val);
+ if (!hstx_trim) {
dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
return;
}
@@ -496,12 +502,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
/* Fused TUNE1/2 value is the higher nibble only */
if (cfg->update_tune1_with_efuse)
qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
- val[0] << HSTX_TRIM_SHIFT,
- HSTX_TRIM_MASK);
+ hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
else
qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
- val[0] << HSTX_TRIM_SHIFT,
- HSTX_TRIM_MASK);
+ hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
}
static int qusb2_phy_set_mode(struct phy *phy,
--
2.33.0
From: Amelie Delaunay <[email protected]>
[ Upstream commit 1ad707f559f7cb12c64f3d7cb37f0b1ea27c1058 ]
If role is changed without the "none" step, A- and B- valid session could
be set at the same time. It is an issue.
This patch resets A-session if role switch sets B-session, and resets
B-session if role switch sets A-session.
Then, it is possible to change the role without the "none" step.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/drd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
index 99672360f34b0..aa6eb76f64ddc 100644
--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -40,6 +40,7 @@ static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
(!valid && !(gotgctl & GOTGCTL_ASESVLD)))
return -EALREADY;
+ gotgctl &= ~GOTGCTL_BVALOVAL;
if (valid)
gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
else
@@ -58,6 +59,7 @@ static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid)
(!valid && !(gotgctl & GOTGCTL_BSESVLD)))
return -EALREADY;
+ gotgctl &= ~GOTGCTL_AVALOVAL;
if (valid)
gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
else
--
2.33.0
From: Wan Jiabing <[email protected]>
[ Upstream commit 72f1aa6205d84337b90b065f602a8fe190821781 ]
Fix following coccicheck warning:
./drivers/soc/qcom/apr.c:485:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return
Early exits from for_each_child_of_node should decrement the
node reference counter.
Fixes: 834735662602 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Wan Jiabing <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/apr.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 7abfc8c4fdc72..f736d208362c9 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -323,12 +323,14 @@ static int of_apr_add_pd_lookups(struct device *dev)
1, &service_path);
if (ret < 0) {
dev_err(dev, "pdr service path missing: %d\n", ret);
+ of_node_put(node);
return ret;
}
pds = pdr_add_lookup(apr->pdr, service_name, service_path);
if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
dev_err(dev, "pdr add lookup failed: %ld\n", PTR_ERR(pds));
+ of_node_put(node);
return PTR_ERR(pds);
}
}
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 8d55027f4e2c04146a75fb63371ab96ccc887f2c ]
Smatch complains that if of_get_address() returns NULL, then "size"
isn't initialized. Also it would lead to an Oops.
Fixes: 7f78322cdd67 ("phy: ti: gmii-sel: retrieve ports number and base offset from dt")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Grygorii Strashko <[email protected]>
Link: https://lore.kernel.org/r/20210914110038.GB11657@kili
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/ti/phy-gmii-sel.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index 5fd2e8a08bfcf..d0ab69750c6b4 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -320,6 +320,8 @@ static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv)
u64 size;
offset = of_get_address(dev->of_node, 0, &size, NULL);
+ if (!offset)
+ return -EINVAL;
priv->num_ports = size / sizeof(u32);
if (!priv->num_ports)
return -EINVAL;
--
2.33.0
From: Guru Das Srinagesh <[email protected]>
[ Upstream commit 38212b2a8a6fc4c3a6fa99d7445b833bedc9a67c ]
Since __qcom_scm_is_call_available() returns bool, have it return false
instead of -EINVAL if an invalid SMC convention is detected.
This fixes the Smatch static checker warning:
drivers/firmware/qcom_scm.c:255 __qcom_scm_is_call_available()
warn: signedness bug returning '(-22)'
Fixes: 9d11af8b06a8 ("firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Guru Das Srinagesh <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/qcom_scm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index c5b20bdc08e9d..e10a99860ca4b 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -252,7 +252,7 @@ static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
break;
default:
pr_err("Unknown SMC convention being used\n");
- return -EINVAL;
+ return false;
}
ret = qcom_scm_call(dev, &desc, &res);
--
2.33.0
From: Vegard Nossum <[email protected]>
[ Upstream commit 9ca0e55e52c7b2a99f3c2051fc4bd1c63a061519 ]
Fix the following build/link errors:
ld: drivers/staging/ks7010/ks_hostif.o: in function `michael_mic.constprop.0':
ks_hostif.c:(.text+0x95b): undefined reference to `crypto_alloc_shash'
ld: ks_hostif.c:(.text+0x97a): undefined reference to `crypto_shash_setkey'
ld: ks_hostif.c:(.text+0xa13): undefined reference to `crypto_shash_update'
ld: ks_hostif.c:(.text+0xa28): undefined reference to `crypto_shash_update'
ld: ks_hostif.c:(.text+0xa48): undefined reference to `crypto_shash_finup'
ld: ks_hostif.c:(.text+0xa6d): undefined reference to `crypto_destroy_tfm'
Fixes: 8b523f20417d ("staging: ks7010: removed custom Michael MIC implementation.")
Fixes: 3e5bc68fa5968 ("staging: ks7010: Fix build error")
Fixes: a4961427e7494 ("Revert "staging: ks7010: Fix build error"")
Signed-off-by: Vegard Nossum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/ks7010/Kconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/staging/ks7010/Kconfig b/drivers/staging/ks7010/Kconfig
index 0987fdc2f70db..8ea6c09286798 100644
--- a/drivers/staging/ks7010/Kconfig
+++ b/drivers/staging/ks7010/Kconfig
@@ -5,6 +5,9 @@ config KS7010
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
+ select CRYPTO
+ select CRYPTO_HASH
+ select CRYPTO_MICHAEL_MIC
help
This is a driver for KeyStream KS7010 based SDIO WIFI cards. It is
found on at least later Spectec SDW-821 (FCC-ID "S2Y-WLAN-11G-K" only,
--
2.33.0
From: Olivier Moysan <[email protected]>
[ Upstream commit 1a9a9d226f0f0ef5d9bf588ab432e0d679bb1954 ]
Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15.
Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2.
Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2
Fixes: dcf185ca8175 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15")
Signed-off-by: Olivier Moysan <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index dee4d32ab32c4..ccf66adbbf623 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1091,7 +1091,7 @@
};
};
- sai2a_pins_c: sai2a-4 {
+ sai2a_pins_c: sai2a-2 {
pins {
pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
<STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1102,7 +1102,7 @@
};
};
- sai2a_sleep_pins_c: sai2a-5 {
+ sai2a_sleep_pins_c: sai2a-2 {
pins {
pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
<STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1147,14 +1147,14 @@
};
};
- sai2b_pins_c: sai2a-4 {
+ sai2b_pins_c: sai2b-2 {
pins1 {
pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
bias-disable;
};
};
- sai2b_sleep_pins_c: sai2a-sleep-5 {
+ sai2b_sleep_pins_c: sai2b-sleep-2 {
pins {
pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
};
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 28e7f8ff90583791a034d43b5d2e3fe394142e13 ]
The GENMASK(h, l) macro creates a contiguous bitmask starting at bit
position @l and ending at position @h, inclusive.
This did not trigger any error checks, as the individual register fields
cover at most 3 of the 4 available bits.
Fixes: 08df16e07ad0a1ec ("pinctrl: sh-pfc: checker: Add drive strength register checks")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/8f82d6147fbe3367d4c83962480e97f58d9c96a2.1633615652.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/renesas/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
index c528c124fb0e9..9d168b90cd281 100644
--- a/drivers/pinctrl/renesas/core.c
+++ b/drivers/pinctrl/renesas/core.c
@@ -890,7 +890,7 @@ static void __init sh_pfc_check_drive_reg(const struct sh_pfc_soc_info *info,
if (!field->pin && !field->offset && !field->size)
continue;
- mask = GENMASK(field->offset + field->size, field->offset);
+ mask = GENMASK(field->offset + field->size - 1, field->offset);
if (mask & seen)
sh_pfc_err("drive_reg 0x%x: field %u overlap\n",
drive->reg, i);
--
2.33.0
From: Peter Rosin <[email protected]>
[ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ]
This went unnoticed until commit 7897b071ac3b ("net: macb: convert
to phylink") which tickled the problem. The sama5d3 emac has never
been capable of rgmii, and it all just happened to work before that
commit.
Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/at91-tse850-3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 3ca97b47c69ce..7e5c598e7e68f 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -262,7 +262,7 @@
&macb1 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
--
2.33.0
From: Nikita Yushchenko <[email protected]>
[ Upstream commit 2ab189164056b05474275bb40caa038a37713061 ]
Commit 723de0f9171e ("staging: most: remove device from interface
structure") moved registration of driver-provided struct device to
the most subsystem.
Dim2 used to register the same struct device to provide a custom device
attribute. This causes double-registration of the same struct device.
Fix that by moving the custom attribute to driver's dev_groups.
This moves attribute to the platform_device object, which is a better
location for platform-specific attributes anyway.
Fixes: 723de0f9171e ("staging: most: remove device from interface structure")
Acked-by: Christian Gromm <[email protected]>
Signed-off-by: Nikita Yushchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/most/dim2/Makefile | 2 +-
drivers/staging/most/dim2/dim2.c | 24 ++++++++-------
drivers/staging/most/dim2/sysfs.c | 49 ------------------------------
drivers/staging/most/dim2/sysfs.h | 11 -------
4 files changed, 14 insertions(+), 72 deletions(-)
delete mode 100644 drivers/staging/most/dim2/sysfs.c
diff --git a/drivers/staging/most/dim2/Makefile b/drivers/staging/most/dim2/Makefile
index 861adacf6c729..5f9612af3fa3c 100644
--- a/drivers/staging/most/dim2/Makefile
+++ b/drivers/staging/most/dim2/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_MOST_DIM2) += most_dim2.o
-most_dim2-objs := dim2.o hal.o sysfs.o
+most_dim2-objs := dim2.o hal.o
diff --git a/drivers/staging/most/dim2/dim2.c b/drivers/staging/most/dim2/dim2.c
index b34e3c130f53f..8c2f384233aab 100644
--- a/drivers/staging/most/dim2/dim2.c
+++ b/drivers/staging/most/dim2/dim2.c
@@ -115,7 +115,8 @@ struct dim2_platform_data {
(((p)[1] == 0x18) && ((p)[2] == 0x05) && ((p)[3] == 0x0C) && \
((p)[13] == 0x3C) && ((p)[14] == 0x00) && ((p)[15] == 0x0A))
-bool dim2_sysfs_get_state_cb(void)
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
bool state;
unsigned long flags;
@@ -124,9 +125,18 @@ bool dim2_sysfs_get_state_cb(void)
state = dim_get_lock_state();
spin_unlock_irqrestore(&dim_lock, flags);
- return state;
+ return sysfs_emit(buf, "%s\n", state ? "locked" : "");
}
+static DEVICE_ATTR_RO(state);
+
+static struct attribute *dim2_attrs[] = {
+ &dev_attr_state.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(dim2);
+
/**
* dimcb_on_error - callback from HAL to report miscommunication between
* HDM and HAL
@@ -863,16 +873,8 @@ static int dim2_probe(struct platform_device *pdev)
goto err_stop_thread;
}
- ret = dim2_sysfs_probe(&dev->dev);
- if (ret) {
- dev_err(&pdev->dev, "failed to create sysfs attribute\n");
- goto err_unreg_iface;
- }
-
return 0;
-err_unreg_iface:
- most_deregister_interface(&dev->most_iface);
err_stop_thread:
kthread_stop(dev->netinfo_task);
err_shutdown_dim:
@@ -895,7 +897,6 @@ static int dim2_remove(struct platform_device *pdev)
struct dim2_hdm *dev = platform_get_drvdata(pdev);
unsigned long flags;
- dim2_sysfs_destroy(&dev->dev);
most_deregister_interface(&dev->most_iface);
kthread_stop(dev->netinfo_task);
@@ -1079,6 +1080,7 @@ static struct platform_driver dim2_driver = {
.driver = {
.name = "hdm_dim2",
.of_match_table = dim2_of_match,
+ .dev_groups = dim2_groups,
},
};
diff --git a/drivers/staging/most/dim2/sysfs.c b/drivers/staging/most/dim2/sysfs.c
deleted file mode 100644
index c85b2cdcdca3d..0000000000000
--- a/drivers/staging/most/dim2/sysfs.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * sysfs.c - MediaLB sysfs information
- *
- * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
- */
-
-/* Author: Andrey Shvetsov <[email protected]> */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include "sysfs.h"
-#include <linux/device.h>
-
-static ssize_t state_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- bool state = dim2_sysfs_get_state_cb();
-
- return sprintf(buf, "%s\n", state ? "locked" : "");
-}
-
-static DEVICE_ATTR_RO(state);
-
-static struct attribute *dev_attrs[] = {
- &dev_attr_state.attr,
- NULL,
-};
-
-static struct attribute_group dev_attr_group = {
- .attrs = dev_attrs,
-};
-
-static const struct attribute_group *dev_attr_groups[] = {
- &dev_attr_group,
- NULL,
-};
-
-int dim2_sysfs_probe(struct device *dev)
-{
- dev->groups = dev_attr_groups;
- return device_register(dev);
-}
-
-void dim2_sysfs_destroy(struct device *dev)
-{
- device_unregister(dev);
-}
diff --git a/drivers/staging/most/dim2/sysfs.h b/drivers/staging/most/dim2/sysfs.h
index 24277a17cff3d..09115cf4ed00e 100644
--- a/drivers/staging/most/dim2/sysfs.h
+++ b/drivers/staging/most/dim2/sysfs.h
@@ -16,15 +16,4 @@ struct medialb_bus {
struct kobject kobj_group;
};
-struct device;
-
-int dim2_sysfs_probe(struct device *dev);
-void dim2_sysfs_destroy(struct device *dev);
-
-/*
- * callback,
- * must deliver MediaLB state as true if locked or false if unlocked
- */
-bool dim2_sysfs_get_state_cb(void);
-
#endif /* DIM2_SYSFS_H */
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit 8ef1e58783b9f55daa4a865c7801dc75cbeb8260 ]
REGMAP_I2C is not a user visible kconfig symbol so driver configs
should not "depend on" it. They should depend on I2C and then
select REGMAP_I2C.
If this worked, it was only because some other driver had set/enabled
REGMAP_I2C.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Cc: Heikki Krogerus <[email protected]>
Cc: Amelie Delaunay <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: [email protected]
Reviewed-by: Amelie Delaunay <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/typec/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index e7f120874c483..0d953c6805f0f 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -75,9 +75,9 @@ config TYPEC_TPS6598X
config TYPEC_STUSB160X
tristate "STMicroelectronics STUSB160x Type-C controller driver"
- depends on I2C
- depends on REGMAP_I2C
depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
+ depends on I2C
+ select REGMAP_I2C
help
Say Y or M here if your system has STMicroelectronics STUSB160x
Type-C port controller.
--
2.33.0
From: Tony Lindgren <[email protected]>
[ Upstream commit b3e9431854e8f305385d5de225441c0477b936cb ]
On resume we can get a warning at kernel/time/timekeeping.c:824 for
timekeeping_suspended.
Let's fix this by adding separate functions for sysc_poll_reset_sysstatus()
and sysc_poll_reset_sysconfig() and have the new functions handle also
timekeeping_suspended.
If iopoll at some point supports timekeeping_suspended, we can just drop
the custom handling from these functions.
Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit")
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/ti-sysc.c | 65 +++++++++++++++++++++++++++++++++++--------
1 file changed, 53 insertions(+), 12 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 02341fd66e8d2..2ff437e5c7051 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
+#include <linux/timekeeping.h>
#include <linux/iopoll.h>
#include <linux/platform_data/ti-sysc.h>
@@ -223,37 +224,77 @@ static u32 sysc_read_sysstatus(struct sysc *ddata)
return sysc_read(ddata, offset);
}
-/* Poll on reset status */
-static int sysc_wait_softreset(struct sysc *ddata)
+static int sysc_poll_reset_sysstatus(struct sysc *ddata)
{
- u32 sysc_mask, syss_done, rstval;
- int syss_offset, error = 0;
-
- if (ddata->cap->regbits->srst_shift < 0)
- return 0;
-
- syss_offset = ddata->offsets[SYSC_SYSSTATUS];
- sysc_mask = BIT(ddata->cap->regbits->srst_shift);
+ int error, retries;
+ u32 syss_done, rstval;
if (ddata->cfg.quirks & SYSS_QUIRK_RESETDONE_INVERTED)
syss_done = 0;
else
syss_done = ddata->cfg.syss_mask;
- if (syss_offset >= 0) {
+ if (likely(!timekeeping_suspended)) {
error = readx_poll_timeout_atomic(sysc_read_sysstatus, ddata,
rstval, (rstval & ddata->cfg.syss_mask) ==
syss_done, 100, MAX_MODULE_SOFTRESET_WAIT);
+ } else {
+ retries = MAX_MODULE_SOFTRESET_WAIT;
+ while (retries--) {
+ rstval = sysc_read_sysstatus(ddata);
+ if ((rstval & ddata->cfg.syss_mask) == syss_done)
+ return 0;
+ udelay(2); /* Account for udelay flakeyness */
+ }
+ error = -ETIMEDOUT;
+ }
- } else if (ddata->cfg.quirks & SYSC_QUIRK_RESET_STATUS) {
+ return error;
+}
+
+static int sysc_poll_reset_sysconfig(struct sysc *ddata)
+{
+ int error, retries;
+ u32 sysc_mask, rstval;
+
+ sysc_mask = BIT(ddata->cap->regbits->srst_shift);
+
+ if (likely(!timekeeping_suspended)) {
error = readx_poll_timeout_atomic(sysc_read_sysconfig, ddata,
rstval, !(rstval & sysc_mask),
100, MAX_MODULE_SOFTRESET_WAIT);
+ } else {
+ retries = MAX_MODULE_SOFTRESET_WAIT;
+ while (retries--) {
+ rstval = sysc_read_sysconfig(ddata);
+ if (!(rstval & sysc_mask))
+ return 0;
+ udelay(2); /* Account for udelay flakeyness */
+ }
+ error = -ETIMEDOUT;
}
return error;
}
+/* Poll on reset status */
+static int sysc_wait_softreset(struct sysc *ddata)
+{
+ int syss_offset, error = 0;
+
+ if (ddata->cap->regbits->srst_shift < 0)
+ return 0;
+
+ syss_offset = ddata->offsets[SYSC_SYSSTATUS];
+
+ if (syss_offset >= 0)
+ error = sysc_poll_reset_sysstatus(ddata);
+ else if (ddata->cfg.quirks & SYSC_QUIRK_RESET_STATUS)
+ error = sysc_poll_reset_sysconfig(ddata);
+
+ return error;
+}
+
static int sysc_add_named_clock_from_child(struct sysc *ddata,
const char *name,
const char *optfck_name)
--
2.33.0
From: Marek Vasut <[email protected]>
[ Upstream commit 2012579b31293d0a8cf2024e9dab66810bf1a15e ]
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.
There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex, so opt for the second option.
Fixes: 76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
To: [email protected]
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index a9eb82b2f1704..5af32140e128b 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -198,7 +198,7 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
- spi-max-frequency = <108000000>;
+ spi-max-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
};
--
2.33.0
From: Bjorn Andersson <[email protected]>
[ Upstream commit e3e56c050ab6e3f1bd811f0787f50709017543e4 ]
The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.
But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().
But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.
Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.
The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.
Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/rpmhpd.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index e7cb40144f9b1..436ec79122ed2 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -30,6 +30,7 @@
* @active_only: True if it represents an Active only peer
* @corner: current corner
* @active_corner: current active corner
+ * @enable_corner: lowest non-zero corner
* @level: An array of level (vlvl) to corner (hlvl) mappings
* derived from cmd-db
* @level_count: Number of levels supported by the power domain. max
@@ -47,6 +48,7 @@ struct rpmhpd {
const bool active_only;
unsigned int corner;
unsigned int active_corner;
+ unsigned int enable_corner;
u32 level[RPMH_ARC_MAX_LEVELS];
size_t level_count;
bool enabled;
@@ -295,13 +297,13 @@ static int rpmhpd_aggregate_corner(struct rpmhpd *pd, unsigned int corner)
static int rpmhpd_power_on(struct generic_pm_domain *domain)
{
struct rpmhpd *pd = domain_to_rpmhpd(domain);
- int ret = 0;
+ unsigned int corner;
+ int ret;
mutex_lock(&rpmhpd_lock);
- if (pd->corner)
- ret = rpmhpd_aggregate_corner(pd, pd->corner);
-
+ corner = max(pd->corner, pd->enable_corner);
+ ret = rpmhpd_aggregate_corner(pd, corner);
if (!ret)
pd->enabled = true;
@@ -346,6 +348,10 @@ static int rpmhpd_set_performance_state(struct generic_pm_domain *domain,
i--;
if (pd->enabled) {
+ /* Ensure that the domain isn't turn off */
+ if (i < pd->enable_corner)
+ i = pd->enable_corner;
+
ret = rpmhpd_aggregate_corner(pd, i);
if (ret)
goto out;
@@ -382,6 +388,10 @@ static int rpmhpd_update_level_mapping(struct rpmhpd *rpmhpd)
for (i = 0; i < rpmhpd->level_count; i++) {
rpmhpd->level[i] = buf[i];
+ /* Remember the first corner with non-zero level */
+ if (!rpmhpd->level[rpmhpd->enable_corner] && rpmhpd->level[i])
+ rpmhpd->enable_corner = i;
+
/*
* The AUX data may be zero padded. These 0 valued entries at
* the end of the map must be ignored.
--
2.33.0
From: Richard Fitzgerald <[email protected]>
[ Upstream commit d591d4b32aa9552af14a0c7c586a2d3fe9ecc6e0 ]
Some registers had wrong default values in cs42l42_reg_defaults[].
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 828dc78202e8b..8e44d0f34194e 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -91,7 +91,7 @@ static const struct reg_default cs42l42_reg_defaults[] = {
{ CS42L42_ASP_RX_INT_MASK, 0x1F },
{ CS42L42_ASP_TX_INT_MASK, 0x0F },
{ CS42L42_CODEC_INT_MASK, 0x03 },
- { CS42L42_SRCPL_INT_MASK, 0xFF },
+ { CS42L42_SRCPL_INT_MASK, 0x7F },
{ CS42L42_VPMON_INT_MASK, 0x01 },
{ CS42L42_PLL_LOCK_INT_MASK, 0x01 },
{ CS42L42_TSRS_PLUG_INT_MASK, 0x0F },
@@ -128,7 +128,7 @@ static const struct reg_default cs42l42_reg_defaults[] = {
{ CS42L42_MIXER_CHA_VOL, 0x3F },
{ CS42L42_MIXER_ADC_VOL, 0x3F },
{ CS42L42_MIXER_CHB_VOL, 0x3F },
- { CS42L42_EQ_COEF_IN0, 0x22 },
+ { CS42L42_EQ_COEF_IN0, 0x00 },
{ CS42L42_EQ_COEF_IN1, 0x00 },
{ CS42L42_EQ_COEF_IN2, 0x00 },
{ CS42L42_EQ_COEF_IN3, 0x00 },
--
2.33.0
From: Lee Jones <[email protected]>
[ Upstream commit 5d16af6a921f5a4e7038671be5478cba4b7cfe81 ]
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'parent' not described in 'rpmhpd'
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'corner' not described in 'rpmhpd'
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'active_corner' not described in 'rpmhpd'
Cc: Andy Gross <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: [email protected]
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/rpmhpd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index c8b584d0c8fb4..e7cb40144f9b1 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -24,9 +24,12 @@
* struct rpmhpd - top level RPMh power domain resource data structure
* @dev: rpmh power domain controller device
* @pd: generic_pm_domain corrresponding to the power domain
+ * @parent: generic_pm_domain corrresponding to the parent's power domain
* @peer: A peer power domain in case Active only Voting is
* supported
* @active_only: True if it represents an Active only peer
+ * @corner: current corner
+ * @active_corner: current active corner
* @level: An array of level (vlvl) to corner (hlvl) mappings
* derived from cmd-db
* @level_count: Number of levels supported by the power domain. max
--
2.33.0
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 0306988789d9d91a18ff70bd2bf165d3ae0ef1dd ]
The driver can run without an interrupt so if devm_request_threaded_irq()
failed, the probe() just carried on. But if this was EPROBE_DEFER the
driver would continue without an interrupt instead of deferring to wait
for the interrupt to become available.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 8e44d0f34194e..191431868c678 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1796,8 +1796,9 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
NULL, cs42l42_irq_thread,
IRQF_ONESHOT | IRQF_TRIGGER_LOW,
"cs42l42", cs42l42);
-
- if (ret != 0)
+ if (ret == -EPROBE_DEFER)
+ goto err_disable;
+ else if (ret != 0)
dev_err(&i2c_client->dev,
"Failed to request IRQ: %d\n", ret);
--
2.33.0
From: Pali Rohár <[email protected]>
[ Upstream commit d419052bc6c60fa4ab2b5a51d5f1e55a66e2b4ff ]
Commit 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") started
using CRSSVE flag for handling CRS responses.
PCI_EXP_RTCTL_CRSSVE flag is stored only in emulated config space buffer
and there is handler for PCI_EXP_RTCTL register. So every read operation
from config space automatically clears CRSSVE flag as it is not defined in
PCI_EXP_RTCTL read handler.
Fix this by reading current CRSSVE bit flag from emulated space buffer and
appending it to PCI_EXP_RTCTL read response.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 65762fddd9fc0..5b34dea80885d 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -885,6 +885,7 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
case PCI_EXP_RTCTL: {
u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
*value = (val & PCIE_MSG_PM_PME_MASK) ? 0 : PCI_EXP_RTCTL_PMEIE;
+ *value |= le16_to_cpu(bridge->pcie_conf.rootctl) & PCI_EXP_RTCTL_CRSSVE;
*value |= PCI_EXP_RTCAP_CRSVIS << 16;
return PCI_BRIDGE_EMUL_HANDLED;
}
--
2.33.0
From: Alex Xu (Hello71) <[email protected]>
[ Upstream commit 7be28bd73f23e53d6e7f5fe891ba9503fc0c7210 ]
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_update':
drivers/gpu/drm/drm_plane_helper.c:113:32: error: 'visible' is used uninitialized [-Werror=uninitialized]
113 | struct drm_plane_state plane_state = {
| ^~~~~~~~~~~
drivers/gpu/drm/drm_plane_helper.c:178:14: note: 'visible' was declared here
178 | bool visible;
| ^~~~~~~
cc1: all warnings being treated as errors
visible is an output, not an input. in practice this use might turn out
OK but it's still UB.
Fixes: df86af9133b4 ("drm/plane-helper: Add drm_plane_helper_check_state()")
Reviewed-by: Simon Ser <[email protected]>
Signed-off-by: Alex Xu (Hello71) <[email protected]>
Signed-off-by: Simon Ser <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_plane_helper.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
index 3aae7ea522f23..c3f2292dc93d5 100644
--- a/drivers/gpu/drm/drm_plane_helper.c
+++ b/drivers/gpu/drm/drm_plane_helper.c
@@ -123,7 +123,6 @@ static int drm_plane_helper_check_update(struct drm_plane *plane,
.crtc_w = drm_rect_width(dst),
.crtc_h = drm_rect_height(dst),
.rotation = rotation,
- .visible = *visible,
};
struct drm_crtc_state crtc_state = {
.crtc = crtc,
--
2.33.0
From: YueHaibing <[email protected]>
[ Upstream commit 27ff8187f13ecfec8a26fb1928e906f46f326cc5 ]
Fix sparse warning:
drivers/opp/of.c:924 _opp_add_static_v2() warn: passing zero to 'ERR_PTR'
For duplicate OPPs 'ret' be set to zero.
Fixes: deac8703da5f ("PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/opp/of.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index f83f4f6d70349..5de46aa99d243 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -827,7 +827,7 @@ free_required_opps:
free_opp:
_opp_free(new_opp);
- return ERR_PTR(ret);
+ return ret ? ERR_PTR(ret) : NULL;
}
/* Initializes OPP tables based on new bindings */
--
2.33.0
From: Olivier Moysan <[email protected]>
[ Upstream commit 6f87a74d31277f0896dcf8c0850ec14bde03c423 ]
The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.
Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c")
Signed-off-by: Olivier Moysan <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32mp151.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index b479016fef008..7a0ef01de969e 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -811,7 +811,7 @@
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x1c>;
+ reg = <0x4 0x20>;
clocks = <&rcc SAI1_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 87 0x400 0x01>;
@@ -821,7 +821,7 @@
sai1b: audio-controller@4400a024 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1c>;
+ reg = <0x24 0x20>;
clocks = <&rcc SAI1_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 88 0x400 0x01>;
@@ -842,7 +842,7 @@
sai2a: audio-controller@4400b004 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x1c>;
+ reg = <0x4 0x20>;
clocks = <&rcc SAI2_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 89 0x400 0x01>;
@@ -852,7 +852,7 @@
sai2b: audio-controller@4400b024 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1c>;
+ reg = <0x24 0x20>;
clocks = <&rcc SAI2_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 90 0x400 0x01>;
@@ -873,7 +873,7 @@
sai3a: audio-controller@4400c004 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-a";
- reg = <0x04 0x1c>;
+ reg = <0x04 0x20>;
clocks = <&rcc SAI3_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 113 0x400 0x01>;
@@ -883,7 +883,7 @@
sai3b: audio-controller@4400c024 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1c>;
+ reg = <0x24 0x20>;
clocks = <&rcc SAI3_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 114 0x400 0x01>;
@@ -1250,7 +1250,7 @@
sai4a: audio-controller@50027004 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-a";
- reg = <0x04 0x1c>;
+ reg = <0x04 0x20>;
clocks = <&rcc SAI4_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 99 0x400 0x01>;
@@ -1260,7 +1260,7 @@
sai4b: audio-controller@50027024 {
#sound-dai-cells = <0>;
compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1c>;
+ reg = <0x24 0x20>;
clocks = <&rcc SAI4_K>;
clock-names = "sai_ck";
dmas = <&dmamux1 100 0x400 0x01>;
--
2.33.0
From: Xuan Zhuo <[email protected]>
[ Upstream commit fc6d70f40b3d0b3219e2026d05be0409695f620d ]
When using indirect with packed, we don't check for allocation failures.
This patch checks that and fall back on direct.
Fixes: 1ce9e6055fa0 ("virtio_ring: introduce packed ring support")
Signed-off-by: Xuan Zhuo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/virtio/virtio_ring.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 6c730d6d50f71..e9432dbbec0a7 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -992,6 +992,8 @@ static int virtqueue_add_indirect_packed(struct vring_virtqueue *vq,
head = vq->packed.next_avail_idx;
desc = alloc_indirect_packed(total_sg, gfp);
+ if (!desc)
+ return -ENOMEM;
if (unlikely(vq->vq.num_free < 1)) {
pr_debug("Can't add buf len 1 - avail = 0\n");
@@ -1103,6 +1105,7 @@ static inline int virtqueue_add_packed(struct virtqueue *_vq,
unsigned int i, n, c, descs_used, err_idx;
__le16 head_flags, flags;
u16 head, id, prev, curr, avail_used_flags;
+ int err;
START_USE(vq);
@@ -1118,9 +1121,14 @@ static inline int virtqueue_add_packed(struct virtqueue *_vq,
BUG_ON(total_sg == 0);
- if (virtqueue_use_indirect(_vq, total_sg))
- return virtqueue_add_indirect_packed(vq, sgs, total_sg,
- out_sgs, in_sgs, data, gfp);
+ if (virtqueue_use_indirect(_vq, total_sg)) {
+ err = virtqueue_add_indirect_packed(vq, sgs, total_sg, out_sgs,
+ in_sgs, data, gfp);
+ if (err != -ENOMEM)
+ return err;
+
+ /* fall back on direct */
+ }
head = vq->packed.next_avail_idx;
avail_used_flags = vq->packed.avail_used_flags;
--
2.33.0
From: Jakob Hauser <[email protected]>
[ Upstream commit bf895295e9a73411889816f1a0c1f4f1a2d9c678 ]
Currently the rt5033_battery driver provides voltage values in mV. It
should be µV as stated in Documentation/power/power_supply_class.rst.
Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Cc: Beomho Seo <[email protected]>
Cc: Chanwoo Choi <[email protected]>
Signed-off-by: Jakob Hauser <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/rt5033_battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c
index 9ad0afe83d1b7..7a23c70f48791 100644
--- a/drivers/power/supply/rt5033_battery.c
+++ b/drivers/power/supply/rt5033_battery.c
@@ -60,7 +60,7 @@ static int rt5033_battery_get_watt_prop(struct i2c_client *client,
regmap_read(battery->regmap, regh, &msb);
regmap_read(battery->regmap, regl, &lsb);
- ret = ((msb << 4) + (lsb >> 4)) * 1250 / 1000;
+ ret = ((msb << 4) + (lsb >> 4)) * 1250;
return ret;
}
--
2.33.0
From: Marek Behún <[email protected]>
[ Upstream commit 464de7e7fff767e87429cd7be09c4f2cb50a6ccb ]
Use dev_dbg() instead of dev_err() in advk_pcie_check_pio_status().
For example CRS is not an error status, it just says that the request
should be retried.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index ec7bafbe813f0..65762fddd9fc0 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -778,7 +778,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
else
str_posted = "Posted";
- dev_err(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
+ dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
return -EFAULT;
--
2.33.0
From: Trond Myklebust <[email protected]>
[ Upstream commit 133a48abf6ecc535d7eddc6da1c3e4c972445882 ]
If O_DIRECT bumps the commit_info rpcs_out field, then that could lead
to fsync() hangs. The fix is to ensure that O_DIRECT calls
nfs_commit_end().
Fixes: 723c921e7dfc ("sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/direct.c | 2 +-
fs/nfs/pnfs_nfs.c | 2 --
fs/nfs/write.c | 9 ++++++---
include/linux/nfs_fs.h | 1 +
4 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 2e894fec036b0..3c0335c15a730 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -620,7 +620,7 @@ static void nfs_direct_commit_complete(struct nfs_commit_data *data)
nfs_unlock_and_release_request(req);
}
- if (atomic_dec_and_test(&cinfo.mds->rpcs_out))
+ if (nfs_commit_end(cinfo.mds))
nfs_direct_write_complete(dreq);
}
diff --git a/fs/nfs/pnfs_nfs.c b/fs/nfs/pnfs_nfs.c
index 37b52b53a7e53..7b9d701bef016 100644
--- a/fs/nfs/pnfs_nfs.c
+++ b/fs/nfs/pnfs_nfs.c
@@ -468,7 +468,6 @@ pnfs_bucket_alloc_ds_commits(struct list_head *list,
goto out_error;
data->ds_commit_index = i;
list_add_tail(&data->list, list);
- atomic_inc(&cinfo->mds->rpcs_out);
nreq++;
}
mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
@@ -520,7 +519,6 @@ pnfs_generic_commit_pagelist(struct inode *inode, struct list_head *mds_pages,
data->ds_commit_index = -1;
list_splice_init(mds_pages, &data->pages);
list_add_tail(&data->list, &list);
- atomic_inc(&cinfo->mds->rpcs_out);
nreq++;
}
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index dc7201c83bc29..bde4c362841f0 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1649,10 +1649,13 @@ static void nfs_commit_begin(struct nfs_mds_commit_info *cinfo)
atomic_inc(&cinfo->rpcs_out);
}
-static void nfs_commit_end(struct nfs_mds_commit_info *cinfo)
+bool nfs_commit_end(struct nfs_mds_commit_info *cinfo)
{
- if (atomic_dec_and_test(&cinfo->rpcs_out))
+ if (atomic_dec_and_test(&cinfo->rpcs_out)) {
wake_up_var(&cinfo->rpcs_out);
+ return true;
+ }
+ return false;
}
void nfs_commitdata_release(struct nfs_commit_data *data)
@@ -1752,6 +1755,7 @@ void nfs_init_commit(struct nfs_commit_data *data,
data->res.fattr = &data->fattr;
data->res.verf = &data->verf;
nfs_fattr_init(&data->fattr);
+ nfs_commit_begin(cinfo->mds);
}
EXPORT_SYMBOL_GPL(nfs_init_commit);
@@ -1797,7 +1801,6 @@ nfs_commit_list(struct inode *inode, struct list_head *head, int how,
/* Set up the argument struct */
nfs_init_commit(data, head, NULL, cinfo);
- atomic_inc(&cinfo->mds->rpcs_out);
return nfs_initiate_commit(NFS_CLIENT(inode), data, NFS_PROTO(inode),
data->mds_ops, how, RPC_TASK_CRED_NOREF);
}
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 91a6525a98cb7..aff5cd382fef5 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -553,6 +553,7 @@ extern int nfs_wb_page_cancel(struct inode *inode, struct page* page);
extern int nfs_commit_inode(struct inode *, int);
extern struct nfs_commit_data *nfs_commitdata_alloc(bool never_fail);
extern void nfs_commit_free(struct nfs_commit_data *data);
+bool nfs_commit_end(struct nfs_mds_commit_info *cinfo);
static inline int
nfs_have_writebacks(struct inode *inode)
--
2.33.0
From: Trond Myklebust <[email protected]>
[ Upstream commit 64a93dbf25d3a1368bb58ddf0f61d0a92d7479e3 ]
Partially revert commit 2ce209c42c01 ("NFS: Wait for requests that are
locked on the commit list"), since it can lead to deadlocks between
commit requests and nfs_join_page_group().
For now we should assume that any locked requests on the commit list are
either about to be removed and committed by another task, or the writes
they describe are about to be retransmitted. In either case, we should
not need to worry.
Fixes: 2ce209c42c01 ("NFS: Wait for requests that are locked on the commit list")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/write.c | 17 ++---------------
1 file changed, 2 insertions(+), 15 deletions(-)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 639c34fec04a8..dc7201c83bc29 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1034,25 +1034,11 @@ nfs_scan_commit_list(struct list_head *src, struct list_head *dst,
struct nfs_page *req, *tmp;
int ret = 0;
-restart:
list_for_each_entry_safe(req, tmp, src, wb_list) {
kref_get(&req->wb_kref);
if (!nfs_lock_request(req)) {
- int status;
-
- /* Prevent deadlock with nfs_lock_and_join_requests */
- if (!list_empty(dst)) {
- nfs_release_request(req);
- continue;
- }
- /* Ensure we make progress to prevent livelock */
- mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
- status = nfs_wait_on_request(req);
nfs_release_request(req);
- mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
- if (status < 0)
- break;
- goto restart;
+ continue;
}
nfs_request_remove_commit_list(req, cinfo);
clear_bit(PG_COMMIT_TO_DS, &req->wb_flags);
@@ -1924,6 +1910,7 @@ static int __nfs_commit_inode(struct inode *inode, int how,
int may_wait = how & FLUSH_SYNC;
int ret, nscan;
+ how &= ~FLUSH_SYNC;
nfs_init_cinfo_from_inode(&cinfo, inode);
nfs_commit_begin(cinfo.mds);
for (;;) {
--
2.33.0
From: Trond Myklebust <[email protected]>
[ Upstream commit f0caea8882a7412a2ad4d8274f0280cdf849c9e2 ]
Olga reports seeing the following Oops when doing O_DIRECT writes to a
pNFS flexfiles server:
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 234186 Comm: kworker/u8:1 Not tainted 5.15.0-rc4+ #4
Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Workqueue: nfsiod rpc_async_release [sunrpc]
RIP: 0010:nfs_mark_request_commit+0x12/0x30 [nfs]
Code: ff ff be 03 00 00 00 e8 ac 34 83 eb e9 29 ff ff
ff e8 22 bc d7 eb 66 90 0f 1f 44 00 00 48 85 f6 74 16 48 8b 42 10 48
8b 40 18 <48> 8b 40 18 48 85 c0 74 05 e9 70 fc 15 ec 48 89 d6 e9 68 ed
ff ff
RSP: 0018:ffffa82f0159fe00 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8f3393141880 RCX: 0000000000000000
RDX: ffffa82f0159fe08 RSI: ffff8f3381252500 RDI: ffff8f3393141880
RBP: ffff8f33ac317c00 R08: 0000000000000000 R09: ffff8f3487724cb0
R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8f3485bccee0 R14: ffff8f33ac317c10 R15: ffff8f33ac317cd8
FS: 0000000000000000(0000) GS:ffff8f34fbc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000122120006 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
nfs_direct_write_completion+0x13b/0x250 [nfs]
rpc_free_task+0x39/0x60 [sunrpc]
rpc_async_release+0x29/0x40 [sunrpc]
process_one_work+0x1ce/0x370
worker_thread+0x30/0x380
? process_one_work+0x370/0x370
kthread+0x11a/0x140
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
Reported-by: Olga Kornievskaia <[email protected]>
Fixes: 9c455a8c1e14 ("NFS/pNFS: Clean up pNFS commit operations")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/pnfs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 132a345e93731..0212fe32e63aa 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -515,7 +515,7 @@ pnfs_mark_request_commit(struct nfs_page *req, struct pnfs_layout_segment *lseg,
{
struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
- if (!lseg || !fl_cinfo->ops->mark_request_commit)
+ if (!lseg || !fl_cinfo->ops || !fl_cinfo->ops->mark_request_commit)
return false;
fl_cinfo->ops->mark_request_commit(req, lseg, cinfo, ds_commit_idx);
return true;
--
2.33.0
From: Brett Creeley <[email protected]>
[ Upstream commit b385cca47363316c6d9a74ae9db407bbc281f815 ]
When a VF is removed and/or reset its Tx queues need to be
stopped from the PF. This is done by calling the ice_dis_vf_qs()
function, which calls ice_vsi_stop_lan_tx_rings(). Currently
ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA.
Unfortunately, this is causing the Tx queues to not be disabled in some
cases and when the VF tries to re-enable/reconfigure its Tx queues over
virtchnl the op is failing. This is because a VF can be reset and/or
removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues
were already configured via ice_vsi_cfg_single_txq() in the
VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit
is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always
happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op.
This was causing the following error message when loading the ice
driver, creating VFs, and modifying VF trust in an endless loop:
[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6
Fix this by always calling ice_dis_vf_qs() and silencing the error
message in ice_vsi_stop_tx_ring() since the calling code ignores the
return anyway. Also, all other places that call ice_vsi_stop_tx_ring()
catch the error, so this doesn't affect those flows since there was no
change to the values the function returns.
Other solutions were considered (i.e. tracking which VF queues had been
"started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed
more complicated than it was worth. This solution also brings in the
chance for other unexpected conditions due to invalid state bit checks.
So, the proposed solution seemed like the best option since there is no
harm in failing to stop Tx queues that were never started.
This issue can be seen using the following commands:
for i in {0..50}; do
rmmod ice
modprobe ice
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
sleep 2
echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
done
Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_base.c | 2 +-
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 6 ++----
2 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c
index fe4320e2d1f2f..1929847b8c404 100644
--- a/drivers/net/ethernet/intel/ice/ice_base.c
+++ b/drivers/net/ethernet/intel/ice/ice_base.c
@@ -839,7 +839,7 @@ ice_vsi_stop_tx_ring(struct ice_vsi *vsi, enum ice_disq_rst_src rst_src,
} else if (status == ICE_ERR_DOES_NOT_EXIST) {
dev_dbg(ice_pf_to_dev(vsi->back), "LAN Tx queues do not exist, nothing to disable\n");
} else if (status) {
- dev_err(ice_pf_to_dev(vsi->back), "Failed to disable LAN Tx queues, error: %s\n",
+ dev_dbg(ice_pf_to_dev(vsi->back), "Failed to disable LAN Tx queues, error: %s\n",
ice_stat_str(status));
return -ENODEV;
}
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 22e23199c92c1..69ce5d60a8570 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -362,8 +362,7 @@ void ice_free_vfs(struct ice_pf *pf)
/* Avoid wait time by stopping all VFs at the same time */
ice_for_each_vf(pf, i)
- if (test_bit(ICE_VF_STATE_QS_ENA, pf->vf[i].vf_states))
- ice_dis_vf_qs(&pf->vf[i]);
+ ice_dis_vf_qs(&pf->vf[i]);
tmp = pf->num_alloc_vfs;
pf->num_qps_per_vf = 0;
@@ -1291,8 +1290,7 @@ bool ice_reset_vf(struct ice_vf *vf, bool is_vflr)
vsi = pf->vsi[vf->lan_vsi_idx];
- if (test_bit(ICE_VF_STATE_QS_ENA, vf->vf_states))
- ice_dis_vf_qs(vf);
+ ice_dis_vf_qs(vf);
/* Call Disable LAN Tx queue AQ whether or not queues are
* enabled. This is needed for successful completion of VFR.
--
2.33.0
From: Tetsuo Handa <[email protected]>
[ Upstream commit 4ddb85d36613c45bde00d368bf9f357bd0708a0c ]
Commit bf9c0538e485b591 ("ataflop: use a separate gendisk for each media
format") introduced ataflop_probe_lock mutex, but forgot to unlock the
mutex when atari_floppy_init() (i.e. module loading) succeeded. This will
result in double lock deadlock if ataflop_probe() is called. Also,
unregister_blkdev() must not be called from atari_floppy_init() with
ataflop_probe_lock held when atari_floppy_init() failed, for
ataflop_probe() waits for ataflop_probe_lock with major_names_lock held
(i.e. AB-BA deadlock).
__register_blkdev() needs to be called last in order to avoid calling
ataflop_probe() when atari_floppy_init() is about to fail, for memory for
completing already-started ataflop_probe() safely will be released as soon
as atari_floppy_init() released ataflop_probe_lock mutex.
As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"),
unregister_blkdev() needs to be called first in order to avoid calling
ataflop_alloc_disk() from ataflop_probe() after del_gendisk() from
atari_floppy_exit().
By relocating __register_blkdev() / unregister_blkdev() as explained above,
we can remove ataflop_probe_lock mutex, for probe function and __exit
function are serialized by major_names_lock mutex.
Signed-off-by: Tetsuo Handa <[email protected]>
Fixes: bf9c0538e485b591 ("ataflop: use a separate gendisk for each media format")
Reviewed-by: Luis Chamberlain <[email protected]>
Tested-by: Michael Schmitz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 47 +++++++++++++++++++++++------------------
1 file changed, 27 insertions(+), 20 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 2d3a66362dcf9..3a29f1992d971 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -2016,8 +2016,6 @@ static int ataflop_alloc_disk(unsigned int drive, unsigned int type)
return 0;
}
-static DEFINE_MUTEX(ataflop_probe_lock);
-
static void ataflop_probe(dev_t dev)
{
int drive = MINOR(dev) & 3;
@@ -2025,14 +2023,32 @@ static void ataflop_probe(dev_t dev)
if (drive >= FD_MAX_UNITS || type > NUM_DISK_MINORS)
return;
- mutex_lock(&ataflop_probe_lock);
if (!unit[drive].disk[type]) {
if (ataflop_alloc_disk(drive, type) == 0) {
add_disk(unit[drive].disk[type]);
unit[drive].registered[type] = true;
}
}
- mutex_unlock(&ataflop_probe_lock);
+}
+
+static void atari_floppy_cleanup(void)
+{
+ int i;
+ int type;
+
+ for (i = 0; i < FD_MAX_UNITS; i++) {
+ for (type = 0; type < NUM_DISK_MINORS; type++) {
+ if (!unit[i].disk[type])
+ continue;
+ del_gendisk(unit[i].disk[type]);
+ blk_cleanup_queue(unit[i].disk[type]->queue);
+ put_disk(unit[i].disk[type]);
+ }
+ blk_mq_free_tag_set(&unit[i].tag_set);
+ }
+
+ del_timer_sync(&fd_timer);
+ atari_stram_free(DMABuffer);
}
static void atari_cleanup_floppy_disk(struct atari_floppy_struct *fs)
@@ -2058,11 +2074,6 @@ static int __init atari_floppy_init (void)
/* Amiga, Mac, ... don't have Atari-compatible floppy :-) */
return -ENODEV;
- mutex_lock(&ataflop_probe_lock);
- ret = __register_blkdev(FLOPPY_MAJOR, "fd", ataflop_probe);
- if (ret)
- goto out_unlock;
-
for (i = 0; i < FD_MAX_UNITS; i++) {
memset(&unit[i].tag_set, 0, sizeof(unit[i].tag_set));
unit[i].tag_set.ops = &ataflop_mq_ops;
@@ -2116,15 +2127,17 @@ static int __init atari_floppy_init (void)
UseTrackbuffer ? "" : "no ");
config_types();
- return 0;
+ ret = __register_blkdev(FLOPPY_MAJOR, "fd", ataflop_probe);
+ if (ret) {
+ printk(KERN_ERR "atari_floppy_init: cannot register block device\n");
+ atari_floppy_cleanup();
+ }
+ return ret;
err:
while (--i >= 0)
atari_cleanup_floppy_disk(&unit[i]);
- unregister_blkdev(FLOPPY_MAJOR, "fd");
-out_unlock:
- mutex_unlock(&ataflop_probe_lock);
return ret;
}
@@ -2169,14 +2182,8 @@ __setup("floppy=", atari_floppy_setup);
static void __exit atari_floppy_exit(void)
{
- int i;
-
- for (i = 0; i < FD_MAX_UNITS; i++)
- atari_cleanup_floppy_disk(&unit[i]);
unregister_blkdev(FLOPPY_MAJOR, "fd");
-
- del_timer_sync(&fd_timer);
- atari_stram_free( DMABuffer );
+ atari_floppy_cleanup();
}
module_init(atari_floppy_init)
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit 009a789443fe4c8e6b1ecb7c16b4865c026184cd ]
The handling of PMIC register reads through writing 0 to address 4
of the OpRegion is wrong. Instead of returning the read value
through the value64, which is a no-op for function == ACPI_WRITE calls,
store the value and then on a subsequent function == ACPI_READ with
address == 3 (the address for the value field of the OpRegion)
return the stored value.
This has been tested on a Xiaomi Mi Pad 2 and makes the ACPI battery dev
there mostly functional (unfortunately there are still other issues).
Here are the SET() / GET() functions of the PMIC ACPI device,
which use this OpRegion, which clearly show the new behavior to
be correct:
OperationRegion (REGS, 0x8F, Zero, 0x50)
Field (REGS, ByteAcc, NoLock, Preserve)
{
CLNT, 8,
SA, 8,
OFF, 8,
VAL, 8,
RWM, 8
}
Method (GET, 3, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
RWM = Zero
If ((AVBG == One))
{
GPRW = Zero
}
}
Return (VAL) /* \_SB_.PCI0.I2C7.PMI5.VAL_ */
}
Method (SET, 4, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
VAL = Arg3
RWM = One
If ((AVBG == One))
{
GPRW = One
}
}
}
Fixes: 0afa877a5650 ("ACPI / PMIC: intel: add REGS operation region support")
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/pmic/intel_pmic.c | 51 +++++++++++++++++++---------------
1 file changed, 28 insertions(+), 23 deletions(-)
diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
index a371f273f99dd..9cde299eba880 100644
--- a/drivers/acpi/pmic/intel_pmic.c
+++ b/drivers/acpi/pmic/intel_pmic.c
@@ -211,31 +211,36 @@ static acpi_status intel_pmic_regs_handler(u32 function,
void *handler_context, void *region_context)
{
struct intel_pmic_opregion *opregion = region_context;
- int result = 0;
+ int result = -EINVAL;
+
+ if (function == ACPI_WRITE) {
+ switch (address) {
+ case 0:
+ return AE_OK;
+ case 1:
+ opregion->ctx.addr |= (*value64 & 0xff) << 8;
+ return AE_OK;
+ case 2:
+ opregion->ctx.addr |= *value64 & 0xff;
+ return AE_OK;
+ case 3:
+ opregion->ctx.val = *value64 & 0xff;
+ return AE_OK;
+ case 4:
+ if (*value64) {
+ result = regmap_write(opregion->regmap, opregion->ctx.addr,
+ opregion->ctx.val);
+ } else {
+ result = regmap_read(opregion->regmap, opregion->ctx.addr,
+ &opregion->ctx.val);
+ }
+ opregion->ctx.addr = 0;
+ }
+ }
- switch (address) {
- case 0:
- return AE_OK;
- case 1:
- opregion->ctx.addr |= (*value64 & 0xff) << 8;
- return AE_OK;
- case 2:
- opregion->ctx.addr |= *value64 & 0xff;
+ if (function == ACPI_READ && address == 3) {
+ *value64 = opregion->ctx.val;
return AE_OK;
- case 3:
- opregion->ctx.val = *value64 & 0xff;
- return AE_OK;
- case 4:
- if (*value64) {
- result = regmap_write(opregion->regmap, opregion->ctx.addr,
- opregion->ctx.val);
- } else {
- result = regmap_read(opregion->regmap, opregion->ctx.addr,
- &opregion->ctx.val);
- if (result == 0)
- *value64 = opregion->ctx.val;
- }
- memset(&opregion->ctx, 0x00, sizeof(opregion->ctx));
}
if (result < 0) {
--
2.33.0
From: Luis Chamberlain <[email protected]>
[ Upstream commit 573effb298011d3fcabc9b12025cf637f8a07911 ]
The ataflop assumes del_gendisk() is safe to call, this is only
true because add_disk() does not return a failure, but that will
change soon. And so, before we get to adding error handling for
that case, let's make sure we keep track of which disks actually
get registered. Then we use this to only call del_gendisk for them.
Signed-off-by: Luis Chamberlain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 359417a016e43..c8a999086060f 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -298,6 +298,7 @@ static struct atari_floppy_struct {
disk change detection) */
int flags; /* flags */
struct gendisk *disk[NUM_DISK_MINORS];
+ bool registered[NUM_DISK_MINORS];
int ref;
int type;
struct blk_mq_tag_set tag_set;
@@ -2026,8 +2027,10 @@ static void ataflop_probe(dev_t dev)
return;
mutex_lock(&ataflop_probe_lock);
if (!unit[drive].disk[type]) {
- if (ataflop_alloc_disk(drive, type) == 0)
+ if (ataflop_alloc_disk(drive, type) == 0) {
add_disk(unit[drive].disk[type]);
+ unit[drive].registered[type] = true;
+ }
}
mutex_unlock(&ataflop_probe_lock);
}
@@ -2091,6 +2094,7 @@ static int __init atari_floppy_init (void)
unit[i].track = -1;
unit[i].flags = 0;
add_disk(unit[i].disk[0]);
+ unit[i].registered[0] = true;
}
printk(KERN_INFO "Atari floppy driver: max. %cD, %strack buffering\n",
@@ -2159,7 +2163,8 @@ static void __exit atari_floppy_exit(void)
for (type = 0; type < NUM_DISK_MINORS; type++) {
if (!unit[i].disk[type])
continue;
- del_gendisk(unit[i].disk[type]);
+ if (unit[i].registered[type])
+ del_gendisk(unit[i].disk[type]);
blk_cleanup_disk(unit[i].disk[type]);
}
blk_mq_free_tag_set(&unit[i].tag_set);
--
2.33.0
From: Chenyuan Mi <[email protected]>
[ Upstream commit 6bb8c2d51811eb5e6504f49efe3b089d026009d2 ]
The reference counting issue happens in one exception handling path of
nouveau_svmm_bind(). When cli->svm.svmm is null, the function forgets
to decrease the refcount of mm increased by get_task_mm(), causing a
refcount leak.
Fix this issue by using mmput() to decrease the refcount in the
exception handling path.
Also, the function forgets to do check against null when get mm
by get_task_mm().
Fix this issue by adding null check after get mm by get_task_mm().
Signed-off-by: Chenyuan Mi <[email protected]>
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Fixes: 822cab6150d3 ("drm/nouveau/svm: check for SVM initialized before migrating")
Reviewed-by: Lyude Paul <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_svm.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c
index 1c3f890377d2c..f67700c028c75 100644
--- a/drivers/gpu/drm/nouveau/nouveau_svm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_svm.c
@@ -156,10 +156,14 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
*/
mm = get_task_mm(current);
+ if (!mm) {
+ return -EINVAL;
+ }
mmap_read_lock(mm);
if (!cli->svm.svmm) {
mmap_read_unlock(mm);
+ mmput(mm);
return -EINVAL;
}
--
2.33.0
From: Luis Chamberlain <[email protected]>
[ Upstream commit deae1138d04758c7f8939fcb8aee330bc37e3015 ]
Instead of using two separate code paths for cleaning up an atari disk,
use one. We take the more careful approach to check for *all* disk
types, as is done on exit. The init path didn't have that check as
the alternative disk types are only probed for later, they are not
initialized by default.
Yes, there is a shared tag for all disks.
Signed-off-by: Luis Chamberlain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 34 +++++++++++++++++++---------------
1 file changed, 19 insertions(+), 15 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index c8a999086060f..2d3a66362dcf9 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -2035,6 +2035,20 @@ static void ataflop_probe(dev_t dev)
mutex_unlock(&ataflop_probe_lock);
}
+static void atari_cleanup_floppy_disk(struct atari_floppy_struct *fs)
+{
+ int type;
+
+ for (type = 0; type < NUM_DISK_MINORS; type++) {
+ if (!fs->disk[type])
+ continue;
+ if (fs->registered[type])
+ del_gendisk(fs->disk[type]);
+ blk_cleanup_disk(fs->disk[type]);
+ }
+ blk_mq_free_tag_set(&fs->tag_set);
+}
+
static int __init atari_floppy_init (void)
{
int i;
@@ -2105,10 +2119,8 @@ static int __init atari_floppy_init (void)
return 0;
err:
- while (--i >= 0) {
- blk_cleanup_disk(unit[i].disk[0]);
- blk_mq_free_tag_set(&unit[i].tag_set);
- }
+ while (--i >= 0)
+ atari_cleanup_floppy_disk(&unit[i]);
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_unlock:
@@ -2157,18 +2169,10 @@ __setup("floppy=", atari_floppy_setup);
static void __exit atari_floppy_exit(void)
{
- int i, type;
+ int i;
- for (i = 0; i < FD_MAX_UNITS; i++) {
- for (type = 0; type < NUM_DISK_MINORS; type++) {
- if (!unit[i].disk[type])
- continue;
- if (unit[i].registered[type])
- del_gendisk(unit[i].disk[type]);
- blk_cleanup_disk(unit[i].disk[type]);
- }
- blk_mq_free_tag_set(&unit[i].tag_set);
- }
+ for (i = 0; i < FD_MAX_UNITS; i++)
+ atari_cleanup_floppy_disk(&unit[i]);
unregister_blkdev(FLOPPY_MAJOR, "fd");
del_timer_sync(&fd_timer);
--
2.33.0
From: Luis Chamberlain <[email protected]>
[ Upstream commit 44a469b6acae6ad05c4acca8429467d1d50a8b8d ]
Use the helper to replace two lines with one.
Signed-off-by: Luis Chamberlain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 94b76c254db9b..359417a016e43 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -2102,8 +2102,7 @@ static int __init atari_floppy_init (void)
err:
while (--i >= 0) {
- blk_cleanup_queue(unit[i].disk[0]->queue);
- put_disk(unit[i].disk[0]);
+ blk_cleanup_disk(unit[i].disk[0]);
blk_mq_free_tag_set(&unit[i].tag_set);
}
@@ -2161,8 +2160,7 @@ static void __exit atari_floppy_exit(void)
if (!unit[i].disk[type])
continue;
del_gendisk(unit[i].disk[type]);
- blk_cleanup_queue(unit[i].disk[type]->queue);
- put_disk(unit[i].disk[type]);
+ blk_cleanup_disk(unit[i].disk[type]);
}
blk_mq_free_tag_set(&unit[i].tag_set);
}
--
2.33.0
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 69c55f6e7669d46bb40e41f6e2b218428178368a ]
This patch fixes the error handling for mcp251xfd_chip_rx_int_enable().
Instead just returning the error, properly shut down the chip.
Link: https://lore.kernel.org/all/[email protected]
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 68ff931993c25..4e13f6dfb91a2 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1041,7 +1041,7 @@ static int mcp251xfd_chip_start(struct mcp251xfd_priv *priv)
err = mcp251xfd_chip_rx_int_enable(priv);
if (err)
- return err;
+ goto out_chip_stop;
err = mcp251xfd_chip_ecc_init(priv);
if (err)
--
2.33.0
From: Ian Rogers <[email protected]>
[ Upstream commit 88c42f4d6cb249eb68524282f8d4cc32f9059984 ]
If btf__new() is called then there needs to be a corresponding btf__free().
Fixes: f8dfeae009effc0b ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tiezhu Yang <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/bpf-event.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/bpf-event.c b/tools/perf/util/bpf-event.c
index 3742511a08d15..c8101575dbf45 100644
--- a/tools/perf/util/bpf-event.c
+++ b/tools/perf/util/bpf-event.c
@@ -557,7 +557,7 @@ void bpf_event__print_bpf_prog_info(struct bpf_prog_info *info,
synthesize_bpf_prog_name(name, KSYM_NAME_LEN, info, btf, 0);
fprintf(fp, "# bpf_prog_info %u: %s addr 0x%llx size %u\n",
info->id, name, prog_addrs[0], prog_lens[0]);
- return;
+ goto out;
}
fprintf(fp, "# bpf_prog_info %u:\n", info->id);
@@ -567,4 +567,6 @@ void bpf_event__print_bpf_prog_info(struct bpf_prog_info *info,
fprintf(fp, "# \tsub_prog %u: %s addr 0x%llx size %u\n",
i, name, prog_addrs[i], prog_lens[i]);
}
+out:
+ btf__free(btf);
}
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit 8ac9dfd58b138f7e82098a4e0a0d46858b12215b ]
Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed.
This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative
if @ifindex is negative.
We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned.
In this patch I chose to use hash_32() to get more entropy
from @ifindex, like llc_sk_laddr_hashfn().
UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26
index -43 is out of range for type 'hlist_head [64]'
CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
llc_sk_dev_hash include/net/llc.h:75 [inline]
llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697
llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404
__sys_bind+0x1e9/0x250 net/socket.c:1693
__do_sys_bind net/socket.c:1704 [inline]
__se_sys_bind net/socket.c:1702 [inline]
__x64_sys_bind+0x6f/0xb0 net/socket.c:1702
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa503407ae9
Fixes: 6d2e3ea28446 ("llc: use a device based hash table to speed up multicast delivery")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/llc.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/net/llc.h b/include/net/llc.h
index df282d9b40170..9c10b121b49b0 100644
--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -72,7 +72,9 @@ struct llc_sap {
static inline
struct hlist_head *llc_sk_dev_hash(struct llc_sap *sap, int ifindex)
{
- return &sap->sk_dev_hash[ifindex % LLC_SK_DEV_HASH_ENTRIES];
+ u32 bucket = hash_32(ifindex, LLC_SK_DEV_HASH_BITS);
+
+ return &sap->sk_dev_hash[bucket];
}
static inline
--
2.33.0
From: Heiner Kallweit <[email protected]>
[ Upstream commit a4db9055fdb9cf607775c66d39796caf6439ec92 ]
As reported by Zhang there's a small issue if in forced mode the duplex
mode changes with the link staying up [0]. In this case the MAC isn't
notified about the change.
The proposed patch relies on the phylib state machine and ignores the
fact that there are drivers that uses phylib but not the phylib state
machine. So let's don't change the behavior for such drivers and fix
it w/o re-adding state PHY_FORCING for the case that phylib state
machine is used.
[0] https://lore.kernel.org/netdev/[email protected]/T/
Fixes: 2bd229df5e2e ("net: phy: remove state PHY_FORCING")
Reported-by: Zhang Changzhong <[email protected]>
Tested-by: Zhang Changzhong <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/phy.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 5ee7cde0c2e97..db7866b6f7525 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -831,7 +831,12 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev,
phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
/* Restart the PHY */
- _phy_start_aneg(phydev);
+ if (phy_is_started(phydev)) {
+ phydev->state = PHY_UP;
+ phy_trigger_machine(phydev);
+ } else {
+ _phy_start_aneg(phydev);
+ }
mutex_unlock(&phydev->lock);
return 0;
--
2.33.0
From: Miaohe Lin <[email protected]>
[ Upstream commit afe8605ca45424629fdddfd85984b442c763dc47 ]
There is one possible race window between zs_pool_dec_isolated() and
zs_unregister_migration() because wait_for_isolated_drain() checks the
isolated count without holding class->lock and there is no order inside
zs_pool_dec_isolated(). Thus the below race window could be possible:
zs_pool_dec_isolated zs_unregister_migration
check pool->destroying != 0
pool->destroying = true;
smp_mb();
wait_for_isolated_drain()
wait for pool->isolated_pages == 0
atomic_long_dec(&pool->isolated_pages);
atomic_long_read(&pool->isolated_pages) == 0
Since we observe the pool->destroying (false) before atomic_long_dec()
for pool->isolated_pages, waking pool->migration_wait up is missed.
Fix this by ensure checking pool->destroying happens after the
atomic_long_dec(&pool->isolated_pages).
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 701d678599d0 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Henry Burns <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/zsmalloc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index 7a0b79b0a6899..73cd50735df29 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -1835,10 +1835,11 @@ static inline void zs_pool_dec_isolated(struct zs_pool *pool)
VM_BUG_ON(atomic_long_read(&pool->isolated_pages) <= 0);
atomic_long_dec(&pool->isolated_pages);
/*
- * There's no possibility of racing, since wait_for_isolated_drain()
- * checks the isolated count under &class->lock after enqueuing
- * on migration_wait.
+ * Checking pool->destroying must happen after atomic_long_dec()
+ * for pool->isolated_pages above. Paired with the smp_mb() in
+ * zs_unregister_migration().
*/
+ smp_mb__after_atomic();
if (atomic_long_read(&pool->isolated_pages) == 0 && pool->destroying)
wake_up_all(&pool->migration_wait);
}
--
2.33.0
From: Huang Guobin <[email protected]>
[ Upstream commit b93c6a911a3fe926b00add28f3b932007827c4ca ]
When I do fuzz test for bonding device interface, I got the following
use-after-free Calltrace:
==================================================================
BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0
Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365
CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
Call Trace:
dump_stack_lvl+0x6c/0x8b
print_address_description.constprop.0+0x48/0x70
kasan_report.cold+0x82/0xdb
__asan_load8+0x69/0x90
bond_enslave+0x1521/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f19159cf577
Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78
RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577
RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000
R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0
Allocated by task 7365:
kasan_save_stack+0x23/0x50
__kasan_kmalloc+0x83/0xa0
kmem_cache_alloc_trace+0x22e/0x470
bond_enslave+0x2e1/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 7365:
kasan_save_stack+0x23/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x24/0x40
__kasan_slab_free+0xf2/0x130
kfree+0xd1/0x5c0
slave_kobj_release+0x61/0x90
kobject_put+0x102/0x180
bond_sysfs_slave_add+0x7a/0xa0
bond_enslave+0x11b6/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
delayed_work_timer_fn+0x3e/0x50
call_timer_fn+0x148/0x470
run_timer_softirq+0x8a8/0xc50
__do_softirq+0x107/0x55f
Second to last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
__queue_delayed_work+0x130/0x180
queue_delayed_work_on+0xa7/0xb0
bond_enslave+0xe25/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88825bc11c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of
1024-byte region [ffff88825bc11c00, ffff88825bc12000)
The buggy address belongs to the page:
page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10
head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0
raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems
when new_slave is accessed in the subsequent error handling process. Since
new_slave will be put in the subsequent error handling process, remove the
unnecessary put to fix it.
In addition, when sysfs_create_file() fails, if some files have been crea-
ted successfully, we need to call sysfs_remove_file() to remove them.
Since there are sysfs_create_files() & sysfs_remove_files() can be used,
use these two functions instead.
Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add)
Signed-off-by: Huang Guobin <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_sysfs_slave.c | 36 ++++++++------------------
1 file changed, 11 insertions(+), 25 deletions(-)
diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index fd07561da0348..6a6cdd0bb2585 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -108,15 +108,15 @@ static ssize_t ad_partner_oper_port_state_show(struct slave *slave, char *buf)
}
static SLAVE_ATTR_RO(ad_partner_oper_port_state);
-static const struct slave_attribute *slave_attrs[] = {
- &slave_attr_state,
- &slave_attr_mii_status,
- &slave_attr_link_failure_count,
- &slave_attr_perm_hwaddr,
- &slave_attr_queue_id,
- &slave_attr_ad_aggregator_id,
- &slave_attr_ad_actor_oper_port_state,
- &slave_attr_ad_partner_oper_port_state,
+static const struct attribute *slave_attrs[] = {
+ &slave_attr_state.attr,
+ &slave_attr_mii_status.attr,
+ &slave_attr_link_failure_count.attr,
+ &slave_attr_perm_hwaddr.attr,
+ &slave_attr_queue_id.attr,
+ &slave_attr_ad_aggregator_id.attr,
+ &slave_attr_ad_actor_oper_port_state.attr,
+ &slave_attr_ad_partner_oper_port_state.attr,
NULL
};
@@ -137,24 +137,10 @@ const struct sysfs_ops slave_sysfs_ops = {
int bond_sysfs_slave_add(struct slave *slave)
{
- const struct slave_attribute **a;
- int err;
-
- for (a = slave_attrs; *a; ++a) {
- err = sysfs_create_file(&slave->kobj, &((*a)->attr));
- if (err) {
- kobject_put(&slave->kobj);
- return err;
- }
- }
-
- return 0;
+ return sysfs_create_files(&slave->kobj, slave_attrs);
}
void bond_sysfs_slave_del(struct slave *slave)
{
- const struct slave_attribute **a;
-
- for (a = slave_attrs; *a; ++a)
- sysfs_remove_file(&slave->kobj, &((*a)->attr));
+ sysfs_remove_files(&slave->kobj, slave_attrs);
}
--
2.33.0
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 002be81140075e17a1ebd5c3c55e356fbab0ddad ]
Early exits from for_each_child_of_node() should decrement the
node reference counter. Reported by Coccinelle:
drivers/mfd/mfd-core.c:197:2-24: WARNING:
Function "for_each_child_of_node" should have of_node_put() before goto around lines 209.
Fixes: c94bb233a9fe ("mfd: Make MFD core code Device Tree and IRQ domain aware")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/mfd-core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index fc00aaccb5f72..a3a6faa99de05 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -210,6 +210,7 @@ static int mfd_add_device(struct device *parent, int id,
if (of_device_is_compatible(np, cell->of_compatible)) {
/* Ignore 'disabled' devices error free */
if (!of_device_is_available(np)) {
+ of_node_put(np);
ret = 0;
goto fail_alias;
}
@@ -217,6 +218,7 @@ static int mfd_add_device(struct device *parent, int id,
ret = mfd_match_of_node_to_dev(pdev, np, cell);
if (ret == -EAGAIN)
continue;
+ of_node_put(np);
if (ret)
goto fail_alias;
--
2.33.0
From: John Fastabend <[email protected]>
[ Upstream commit e0dc3b93bd7bcff8c3813d1df43e0908499c7cf0 ]
Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling
progress, e.g. offset and length of the skb. First this is poorly named and
inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at
this layer.
But, more importantly strparser is using the following to access its metadata.
(struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data))
Where _strp_msg is defined as:
struct _strp_msg {
struct strp_msg strp; /* 0 8 */
int accum_len; /* 8 4 */
/* size: 12, cachelines: 1, members: 2 */
/* last cacheline: 12 bytes */
};
So we use 12 bytes of ->data[] in struct. However in BPF code running parser
and verdict the user has read capabilities into the data[] array as well. Its
not too problematic, but we should not be exposing internal state to BPF
program. If its really needed then we can use the probe_read() APIs which allow
reading kernel memory. And I don't believe cb[] layer poses any API breakage by
moving this around because programs can't depend on cb[] across layers.
In order to fix another issue with a ctx rewrite we need to stash a temp
variable somewhere. To make this work cleanly this patch builds a cb struct
for sk_skb types called sk_skb_cb struct. Then we can use this consistently
in the strparser, sockmap space. Additionally we can start allowing ->cb[]
write access after this.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Jussi Maki <[email protected]>
Reviewed-by: Jakub Sitnicki <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/strparser.h | 16 +++++++++++++++-
net/core/filter.c | 21 +++++++++++++++++++++
net/strparser/strparser.c | 10 +---------
3 files changed, 37 insertions(+), 10 deletions(-)
diff --git a/include/net/strparser.h b/include/net/strparser.h
index 1d20b98493a10..bec1439bd3be6 100644
--- a/include/net/strparser.h
+++ b/include/net/strparser.h
@@ -54,10 +54,24 @@ struct strp_msg {
int offset;
};
+struct _strp_msg {
+ /* Internal cb structure. struct strp_msg must be first for passing
+ * to upper layer.
+ */
+ struct strp_msg strp;
+ int accum_len;
+};
+
+struct sk_skb_cb {
+#define SK_SKB_CB_PRIV_LEN 20
+ unsigned char data[SK_SKB_CB_PRIV_LEN];
+ struct _strp_msg strp;
+};
+
static inline struct strp_msg *strp_msg(struct sk_buff *skb)
{
return (struct strp_msg *)((void *)skb->cb +
- offsetof(struct qdisc_skb_cb, data));
+ offsetof(struct sk_skb_cb, strp));
}
/* Structure for an attached lower socket */
diff --git a/net/core/filter.c b/net/core/filter.c
index 7ea752af7894d..abd58dce49bbc 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -9493,6 +9493,27 @@ static u32 sk_skb_convert_ctx_access(enum bpf_access_type type,
*insn++ = BPF_LDX_MEM(BPF_SIZEOF(void *), si->dst_reg,
si->src_reg, off);
break;
+ case offsetof(struct __sk_buff, cb[0]) ...
+ offsetofend(struct __sk_buff, cb[4]) - 1:
+ BUILD_BUG_ON(sizeof_field(struct sk_skb_cb, data) < 20);
+ BUILD_BUG_ON((offsetof(struct sk_buff, cb) +
+ offsetof(struct sk_skb_cb, data)) %
+ sizeof(__u64));
+
+ prog->cb_access = 1;
+ off = si->off;
+ off -= offsetof(struct __sk_buff, cb[0]);
+ off += offsetof(struct sk_buff, cb);
+ off += offsetof(struct sk_skb_cb, data);
+ if (type == BPF_WRITE)
+ *insn++ = BPF_STX_MEM(BPF_SIZE(si->code), si->dst_reg,
+ si->src_reg, off);
+ else
+ *insn++ = BPF_LDX_MEM(BPF_SIZE(si->code), si->dst_reg,
+ si->src_reg, off);
+ break;
+
+
default:
return bpf_convert_ctx_access(type, si, insn_buf, prog,
target_size);
diff --git a/net/strparser/strparser.c b/net/strparser/strparser.c
index b3815c1e8f2ea..cd9954c4ad808 100644
--- a/net/strparser/strparser.c
+++ b/net/strparser/strparser.c
@@ -27,18 +27,10 @@
static struct workqueue_struct *strp_wq;
-struct _strp_msg {
- /* Internal cb structure. struct strp_msg must be first for passing
- * to upper layer.
- */
- struct strp_msg strp;
- int accum_len;
-};
-
static inline struct _strp_msg *_strp_msg(struct sk_buff *skb)
{
return (struct _strp_msg *)((void *)skb->cb +
- offsetof(struct qdisc_skb_cb, data));
+ offsetof(struct sk_skb_cb, strp));
}
/* Lower lock held */
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 1c360cc1cc883fbdf0a258b4df376571fbeac5ee ]
The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this >
needs to be >= to prevent an off by one bug. The priv->ntfy_blocks[]
array is allocated in gve_alloc_notify_blocks().
Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/google/gve/gve_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 3e96b2a11c5bf..6cb75bb1ed052 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -959,7 +959,7 @@ static void gve_tx_timeout(struct net_device *dev, unsigned int txqueue)
goto reset;
ntfy_idx = gve_tx_idx_to_ntfy(priv, txqueue);
- if (ntfy_idx > priv->num_ntfy_blks)
+ if (ntfy_idx >= priv->num_ntfy_blks)
goto reset;
block = &priv->ntfy_blocks[ntfy_idx];
--
2.33.0
From: Vladimir Oltean <[email protected]>
[ Upstream commit f64ab8e4f368f48afb08ae91928e103d17b235e9 ]
Commit fe28c53ed71d ("net: stmmac: fix taprio configuration when
base_time is in the past") allowed some base time values in the past,
but apparently not all, the base-time value of 0 (Jan 1st 1970) is still
explicitly denied by the driver.
Remove the bogus check.
Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Kurt Kanzenbach <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 6399803061158..43165c662740d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -679,8 +679,6 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
goto disable;
if (qopt->num_entries >= dep)
return -EINVAL;
- if (!qopt->base_time)
- return -ERANGE;
if (!qopt->cycle_time)
return -ERANGE;
--
2.33.0
From: Trond Myklebust <[email protected]>
[ Upstream commit 01d29f87fcfef38d51ce2b473981a5c1e861ac0a ]
If we already hold open state on the client, yet the server gives us a
completely different stateid to the one we already hold, then we
currently treat it as if it were an out-of-sequence update, and wait for
5 seconds for other updates to come in.
This commit fixes the behaviour so that we immediately start processing
of the new stateid, and then leave it to the call to
nfs4_test_and_free_stateid() to decide what to do with the old stateid.
Fixes: b4868b44c562 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4proc.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 5365000e83bd6..3106bd28b1132 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1590,15 +1590,16 @@ static bool nfs_stateid_is_sequential(struct nfs4_state *state,
{
if (test_bit(NFS_OPEN_STATE, &state->flags)) {
/* The common case - we're updating to a new sequence number */
- if (nfs4_stateid_match_other(stateid, &state->open_stateid) &&
- nfs4_stateid_is_next(&state->open_stateid, stateid)) {
- return true;
+ if (nfs4_stateid_match_other(stateid, &state->open_stateid)) {
+ if (nfs4_stateid_is_next(&state->open_stateid, stateid))
+ return true;
+ return false;
}
- } else {
- /* This is the first OPEN in this generation */
- if (stateid->seqid == cpu_to_be32(1))
- return true;
+ /* The server returned a new stateid */
}
+ /* This is the first OPEN in this generation */
+ if (stateid->seqid == cpu_to_be32(1))
+ return true;
return false;
}
--
2.33.0
From: Muchun Song <[email protected]>
[ Upstream commit 10a6de19cad6efb9b49883513afb810dc265fca2 ]
DEFINE_PROC_SHOW_ATTRIBUTE() is supposed to be used to define a series
of functions and variables to register proc file easily. And the users
can use proc_create_data() to pass their own private data and get it
via seq->private in the callback. Unfortunately, the proc file system
use PDE_DATA() to get private data instead of inode->i_private. So fix
it. Fortunately, there only one user of it which does not pass any
private data, so this bug does not break any in-tree codes.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"")
Signed-off-by: Muchun Song <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Christian Brauner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/seq_file.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index b83b3ae3c877f..662a8cfa1bcd3 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -182,7 +182,7 @@ static const struct file_operations __name ## _fops = { \
#define DEFINE_PROC_SHOW_ATTRIBUTE(__name) \
static int __name ## _open(struct inode *inode, struct file *file) \
{ \
- return single_open(file, __name ## _show, inode->i_private); \
+ return single_open(file, __name ## _show, PDE_DATA(inode)); \
} \
\
static const struct proc_ops __name ## _proc_ops = { \
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit 7f98960c046ee1136e7096aee168eda03aef8a5d ]
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is
also already called. So just the unprepare step has still to be done.
Update the error handling path accordingly.
Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-xlr.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 126d1393e548b..9ce20652d4942 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -431,11 +431,15 @@ static int xlr_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&priv->adap, priv);
ret = i2c_add_numbered_adapter(&priv->adap);
if (ret < 0)
- return ret;
+ goto err_unprepare_clk;
platform_set_drvdata(pdev, priv);
dev_info(&priv->adap.dev, "Added I2C Bus.\n");
return 0;
+
+err_unprepare_clk:
+ clk_unprepare(clk);
+ return ret;
}
static int xlr_i2c_remove(struct platform_device *pdev)
--
2.33.0
From: YueHaibing <[email protected]>
[ Upstream commit 4745ea2628bb43a7ec34b71763b5a56407b33990 ]
Return NULL instead of passing to ERR_PTR while err is zero,
this fix smatch warnings:
drivers/xen/xen-pciback/conf_space_capability.c:163
pm_ctrl_init() warn: passing zero to 'ERR_PTR'
Fixes: a92336a1176b ("xen/pciback: Drop two backends, squash and cleanup some code.")
Signed-off-by: YueHaibing <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/xen-pciback/conf_space_capability.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/xen/xen-pciback/conf_space_capability.c b/drivers/xen/xen-pciback/conf_space_capability.c
index 22f13abbe9130..5e53b4817f167 100644
--- a/drivers/xen/xen-pciback/conf_space_capability.c
+++ b/drivers/xen/xen-pciback/conf_space_capability.c
@@ -160,7 +160,7 @@ static void *pm_ctrl_init(struct pci_dev *dev, int offset)
}
out:
- return ERR_PTR(err);
+ return err ? ERR_PTR(err) : NULL;
}
static const struct config_field caplist_pm[] = {
--
2.33.0
From: Guangbin Huang <[email protected]>
[ Upstream commit 688db0c7a4a69ddc8b8143a1cac01eb20082a3aa ]
Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.
Fixes: 330baff5423b ("net: hns3: add ETS TC weight setting in SSU module")
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 2 +-
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 9 +--------
2 files changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index 8e6085753b9f2..5bab885744fc8 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -126,7 +126,7 @@ static int hclge_ets_validate(struct hclge_dev *hdev, struct ieee_ets *ets,
if (ret)
return ret;
- for (i = 0; i < hdev->tc_max; i++) {
+ for (i = 0; i < HNAE3_MAX_TC; i++) {
switch (ets->tc_tsa[i]) {
case IEEE_8021QAZ_TSA_STRICT:
if (hdev->tm_info.tc_info[i].tc_sch_mode !=
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 71aa6d16fc19e..9168e39b63641 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -1039,7 +1039,6 @@ static int hclge_tm_pri_tc_base_dwrr_cfg(struct hclge_dev *hdev)
static int hclge_tm_ets_tc_dwrr_cfg(struct hclge_dev *hdev)
{
-#define DEFAULT_TC_WEIGHT 1
#define DEFAULT_TC_OFFSET 14
struct hclge_ets_tc_weight_cmd *ets_weight;
@@ -1052,13 +1051,7 @@ static int hclge_tm_ets_tc_dwrr_cfg(struct hclge_dev *hdev)
for (i = 0; i < HNAE3_MAX_TC; i++) {
struct hclge_pg_info *pg_info;
- ets_weight->tc_weight[i] = DEFAULT_TC_WEIGHT;
-
- if (!(hdev->hw_tc_map & BIT(i)))
- continue;
-
- pg_info =
- &hdev->tm_info.pg_info[hdev->tm_info.tc_info[i].pgid];
+ pg_info = &hdev->tm_info.pg_info[hdev->tm_info.tc_info[i].pgid];
ets_weight->tc_weight[i] = pg_info->tc_dwrr[i];
}
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit 6dc25401cba4d428328eade8ceae717633fdd702 ]
1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls
ktime_mono_to_any() with out-of-bound value.
2) if q->tk_offset is changed in taprio_parse_clockid(),
taprio_get_time() might also call ktime_mono_to_any()
with out-of-bound value as sysbot found:
UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27
index 3 is out of range for type 'ktime_t *[3]'
CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908
get_tcp_tstamp net/sched/sch_taprio.c:322 [inline]
get_packet_txtime net/sched/sch_taprio.c:353 [inline]
taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420
taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485
dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785
__dev_xmit_skb net/core/dev.c:3869 [inline]
__dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194
batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108
batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline]
batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline]
batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701
process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
worker_thread+0x658/0x11f0 kernel/workqueue.c:2445
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier")
Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Vedang Patel <[email protected]>
Reported-by: syzbot <[email protected]>
Reviewed-by: Vinicius Costa Gomes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_taprio.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index 93899559ba6d2..806babdd838d2 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -94,18 +94,22 @@ static ktime_t sched_base_time(const struct sched_gate_list *sched)
return ns_to_ktime(sched->base_time);
}
-static ktime_t taprio_get_time(struct taprio_sched *q)
+static ktime_t taprio_mono_to_any(const struct taprio_sched *q, ktime_t mono)
{
- ktime_t mono = ktime_get();
+ /* This pairs with WRITE_ONCE() in taprio_parse_clockid() */
+ enum tk_offsets tk_offset = READ_ONCE(q->tk_offset);
- switch (q->tk_offset) {
+ switch (tk_offset) {
case TK_OFFS_MAX:
return mono;
default:
- return ktime_mono_to_any(mono, q->tk_offset);
+ return ktime_mono_to_any(mono, tk_offset);
}
+}
- return KTIME_MAX;
+static ktime_t taprio_get_time(const struct taprio_sched *q)
+{
+ return taprio_mono_to_any(q, ktime_get());
}
static void taprio_free_sched_cb(struct rcu_head *head)
@@ -321,7 +325,7 @@ static ktime_t get_tcp_tstamp(struct taprio_sched *q, struct sk_buff *skb)
return 0;
}
- return ktime_mono_to_any(skb->skb_mstamp_ns, q->tk_offset);
+ return taprio_mono_to_any(q, skb->skb_mstamp_ns);
}
/* There are a few scenarios where we will have to modify the txtime from
@@ -1341,6 +1345,7 @@ static int taprio_parse_clockid(struct Qdisc *sch, struct nlattr **tb,
}
} else if (tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]) {
int clockid = nla_get_s32(tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]);
+ enum tk_offsets tk_offset;
/* We only support static clockids and we don't allow
* for it to be modified after the first init.
@@ -1355,22 +1360,24 @@ static int taprio_parse_clockid(struct Qdisc *sch, struct nlattr **tb,
switch (clockid) {
case CLOCK_REALTIME:
- q->tk_offset = TK_OFFS_REAL;
+ tk_offset = TK_OFFS_REAL;
break;
case CLOCK_MONOTONIC:
- q->tk_offset = TK_OFFS_MAX;
+ tk_offset = TK_OFFS_MAX;
break;
case CLOCK_BOOTTIME:
- q->tk_offset = TK_OFFS_BOOT;
+ tk_offset = TK_OFFS_BOOT;
break;
case CLOCK_TAI:
- q->tk_offset = TK_OFFS_TAI;
+ tk_offset = TK_OFFS_TAI;
break;
default:
NL_SET_ERR_MSG(extack, "Invalid 'clockid'");
err = -EINVAL;
goto out;
}
+ /* This pairs with READ_ONCE() in taprio_mono_to_any */
+ WRITE_ONCE(q->tk_offset, tk_offset);
q->clockid = clockid;
} else {
--
2.33.0
From: Yufeng Mo <[email protected]>
[ Upstream commit e140c7983e3054be0652bf914f4454f16c5520b0 ]
When fully configure VLANs for a VF, then unload the VF while
triggering a reset to PF, will cause a kernel crash because the
irq is already uninit.
[ 293.177579] ------------[ cut here ]------------
[ 293.183502] kernel BUG at drivers/pci/msi.c:352!
[ 293.189547] Internal error: Oops - BUG: 0 [#1] SMP
......
[ 293.390124] Workqueue: hclgevf hclgevf_service_task [hclgevf]
[ 293.402627] pstate: 80c00009 (Nzcv daif +PAN +UAO)
[ 293.414324] pc : free_msi_irqs+0x19c/0x1b8
[ 293.425429] lr : free_msi_irqs+0x18c/0x1b8
[ 293.436545] sp : ffff00002716fbb0
[ 293.446950] x29: ffff00002716fbb0 x28: 0000000000000000
[ 293.459519] x27: 0000000000000000 x26: ffff45b91ea16b00
[ 293.472183] x25: 0000000000000000 x24: ffffa587b08f4700
[ 293.484717] x23: ffffc591ac30e000 x22: ffffa587b08f8428
[ 293.497190] x21: ffffc591ac30e300 x20: 0000000000000000
[ 293.509594] x19: ffffa58a062a8300 x18: 0000000000000000
[ 293.521949] x17: 0000000000000000 x16: ffff45b91dcc3f48
[ 293.534013] x15: 0000000000000000 x14: 0000000000000000
[ 293.545883] x13: 0000000000000040 x12: 0000000000000228
[ 293.557508] x11: 0000000000000020 x10: 0000000000000040
[ 293.568889] x9 : ffff45b91ea1e190 x8 : ffffc591802d0000
[ 293.580123] x7 : ffffc591802d0148 x6 : 0000000000000120
[ 293.591190] x5 : ffffc591802d0000 x4 : 0000000000000000
[ 293.602015] x3 : 0000000000000000 x2 : 0000000000000000
[ 293.612624] x1 : 00000000000004a4 x0 : ffffa58a1e0c6b80
[ 293.623028] Call trace:
[ 293.630340] free_msi_irqs+0x19c/0x1b8
[ 293.638849] pci_disable_msix+0x118/0x140
[ 293.647452] pci_free_irq_vectors+0x20/0x38
[ 293.656081] hclgevf_uninit_msi+0x44/0x58 [hclgevf]
[ 293.665309] hclgevf_reset_rebuild+0x1ac/0x2e0 [hclgevf]
[ 293.674866] hclgevf_reset+0x358/0x400 [hclgevf]
[ 293.683545] hclgevf_reset_service_task+0xd0/0x1b0 [hclgevf]
[ 293.693325] hclgevf_service_task+0x4c/0x2e8 [hclgevf]
[ 293.702307] process_one_work+0x1b0/0x448
[ 293.710034] worker_thread+0x54/0x468
[ 293.717331] kthread+0x134/0x138
[ 293.724114] ret_from_fork+0x10/0x18
[ 293.731324] Code: f940b000 b4ffff00 a903e7b8 f90017b6 (d4210000)
This patch fixes the problem by waiting for the VF reset done
while unloading the VF.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 5 +++++
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 ++
2 files changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index a47f23f27a11c..e27af38f6b161 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2887,7 +2887,10 @@ static void hclgevf_uninit_client_instance(struct hnae3_client *client,
/* un-init roce, if it exists */
if (hdev->roce_client) {
+ while (test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state))
+ msleep(HCLGEVF_WAIT_RESET_DONE);
clear_bit(HCLGEVF_STATE_ROCE_REGISTERED, &hdev->state);
+
hdev->roce_client->ops->uninit_instance(&hdev->roce, 0);
hdev->roce_client = NULL;
hdev->roce.client = NULL;
@@ -2896,6 +2899,8 @@ static void hclgevf_uninit_client_instance(struct hnae3_client *client,
/* un-init nic/unic, if this was not called by roce client */
if (client->ops->uninit_instance && hdev->nic_client &&
client->type != HNAE3_CLIENT_ROCE) {
+ while (test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state))
+ msleep(HCLGEVF_WAIT_RESET_DONE);
clear_bit(HCLGEVF_STATE_NIC_REGISTERED, &hdev->state);
client->ops->uninit_instance(&hdev->nic, 0);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index 526a62f970466..c9b0fa5e8589d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -106,6 +106,8 @@
#define HCLGEVF_VF_RST_ING 0x07008
#define HCLGEVF_VF_RST_ING_BIT BIT(16)
+#define HCLGEVF_WAIT_RESET_DONE 100
+
#define HCLGEVF_RSS_IND_TBL_SIZE 512
#define HCLGEVF_RSS_SET_BITMAP_MSK 0xffff
#define HCLGEVF_RSS_KEY_SIZE 40
--
2.33.0
From: Maxim Kiselev <[email protected]>
[ Upstream commit d52bcb47bdf971a59a2467975d2405fcfcb2fa19 ]
This patch allows to use 0 for `coal->rx_coalesce_usecs` param to
disable rx irq coalescing.
Previously we could enable rx irq coalescing via ethtool
(For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable
it because this part rejects 0 value:
if (!coal->rx_coalesce_usecs)
return -EINVAL;
Fixes: 84da2658a619 ("TI DaVinci EMAC : Implement interrupt pacing functionality.")
Signed-off-by: Maxim Kiselev <[email protected]>
Reviewed-by: Grygorii Strashko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ti/davinci_emac.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 03055c96f0760..ad5293571af4d 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -412,8 +412,20 @@ static int emac_set_coalesce(struct net_device *ndev,
u32 int_ctrl, num_interrupts = 0;
u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0;
- if (!coal->rx_coalesce_usecs)
- return -EINVAL;
+ if (!coal->rx_coalesce_usecs) {
+ priv->coal_intvl = 0;
+
+ switch (priv->version) {
+ case EMAC_VERSION_2:
+ emac_ctrl_write(EMAC_DM646X_CMINTCTRL, 0);
+ break;
+ default:
+ emac_ctrl_write(EMAC_CTRL_EWINTTCNT, 0);
+ break;
+ }
+
+ return 0;
+ }
coal_intvl = coal->rx_coalesce_usecs;
--
2.33.0
From: Stafford Horne <[email protected]>
[ Upstream commit 27dff9a9c247d4e38d82c2e7234914cfe8499294 ]
Throughout the OpenRISC kernel port VMA is passed as NULL when flushing
kernel tlb entries. Somehow this was missed when I was testing
c28b27416da9 ("openrisc: Implement proper SMP tlb flushing") and now the
SMP kernel fails to completely boot.
In OpenRISC VMA is used only to determine which cores need to have their
TLB entries flushed.
This patch updates the logic to flush tlbs on all cores when the VMA is
passed as NULL. Also, we update places VMA is passed as NULL to use
flush_tlb_kernel_range instead. Now, the only place VMA is passed as
NULL is in the implementation of flush_tlb_kernel_range.
Fixes: c28b27416da9 ("openrisc: Implement proper SMP tlb flushing")
Reported-by: Jan Henrik Weinstock <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/openrisc/kernel/dma.c | 4 ++--
arch/openrisc/kernel/smp.c | 6 ++++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c
index 1b16d97e7da7f..a82b2caaa560d 100644
--- a/arch/openrisc/kernel/dma.c
+++ b/arch/openrisc/kernel/dma.c
@@ -33,7 +33,7 @@ page_set_nocache(pte_t *pte, unsigned long addr,
* Flush the page out of the TLB so that the new page flags get
* picked up next time there's an access
*/
- flush_tlb_page(NULL, addr);
+ flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
/* Flush page out of dcache */
for (cl = __pa(addr); cl < __pa(next); cl += cpuinfo->dcache_block_size)
@@ -56,7 +56,7 @@ page_clear_nocache(pte_t *pte, unsigned long addr,
* Flush the page out of the TLB so that the new page flags get
* picked up next time there's an access
*/
- flush_tlb_page(NULL, addr);
+ flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
return 0;
}
diff --git a/arch/openrisc/kernel/smp.c b/arch/openrisc/kernel/smp.c
index e4dad76066aed..18b320a06fe56 100644
--- a/arch/openrisc/kernel/smp.c
+++ b/arch/openrisc/kernel/smp.c
@@ -261,7 +261,7 @@ static inline void ipi_flush_tlb_range(void *info)
local_flush_tlb_range(NULL, fd->addr1, fd->addr2);
}
-static void smp_flush_tlb_range(struct cpumask *cmask, unsigned long start,
+static void smp_flush_tlb_range(const struct cpumask *cmask, unsigned long start,
unsigned long end)
{
unsigned int cpuid;
@@ -309,7 +309,9 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- smp_flush_tlb_range(mm_cpumask(vma->vm_mm), start, end);
+ const struct cpumask *cmask = vma ? mm_cpumask(vma->vm_mm)
+ : cpu_online_mask;
+ smp_flush_tlb_range(cmask, start, end);
}
/* Instruction cache invalidate - performed on each cpu */
--
2.33.0
From: Jakub Kicinski <[email protected]>
[ Upstream commit 1aabe578dd86e9f2867c4db4fba9a15f4ba1825d ]
ETHTOOL_A_PAUSE_STAT_MAX is the MAX attribute id,
so we need to subtract non-stats and add one to
get a count (IOW -2+1 == -1).
Otherwise we'll see:
ethnl cmd 21: calculated reply length 40, but consumed 52
Fixes: 9a27a33027f2 ("ethtool: add standard pause stats")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/ethtool_netlink.h | 3 +++
include/uapi/linux/ethtool_netlink.h | 4 +++-
net/ethtool/pause.c | 3 +--
3 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/include/linux/ethtool_netlink.h b/include/linux/ethtool_netlink.h
index 1e7bf78cb3829..aba348d58ff61 100644
--- a/include/linux/ethtool_netlink.h
+++ b/include/linux/ethtool_netlink.h
@@ -10,6 +10,9 @@
#define __ETHTOOL_LINK_MODE_MASK_NWORDS \
DIV_ROUND_UP(__ETHTOOL_LINK_MODE_MASK_NBITS, 32)
+#define ETHTOOL_PAUSE_STAT_CNT (__ETHTOOL_A_PAUSE_STAT_CNT - \
+ ETHTOOL_A_PAUSE_STAT_TX_FRAMES)
+
enum ethtool_multicast_groups {
ETHNL_MCGRP_MONITOR,
};
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index e2bf36e6964b6..c94fa29415021 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -394,7 +394,9 @@ enum {
ETHTOOL_A_PAUSE_STAT_TX_FRAMES,
ETHTOOL_A_PAUSE_STAT_RX_FRAMES,
- /* add new constants above here */
+ /* add new constants above here
+ * adjust ETHTOOL_PAUSE_STAT_CNT if adding non-stats!
+ */
__ETHTOOL_A_PAUSE_STAT_CNT,
ETHTOOL_A_PAUSE_STAT_MAX = (__ETHTOOL_A_PAUSE_STAT_CNT - 1)
};
diff --git a/net/ethtool/pause.c b/net/ethtool/pause.c
index d4ac02718b72a..c7bc704c8862a 100644
--- a/net/ethtool/pause.c
+++ b/net/ethtool/pause.c
@@ -62,8 +62,7 @@ static int pause_reply_size(const struct ethnl_req_info *req_base,
if (req_base->flags & ETHTOOL_FLAG_STATS)
n += nla_total_size(0) + /* _PAUSE_STATS */
- nla_total_size_64bit(sizeof(u64)) *
- (ETHTOOL_A_PAUSE_STAT_MAX - 2);
+ nla_total_size_64bit(sizeof(u64)) * ETHTOOL_PAUSE_STAT_CNT;
return n;
}
--
2.33.0
From: Ziyang Xuan <[email protected]>
[ Upstream commit 563bcbae3ba233c275c244bfce2efe12938f5363 ]
The real_dev of a vlan net_device may be freed after
unregister_vlan_dev(). Access the real_dev continually by
vlan_dev_real_dev() will trigger the UAF problem for the
real_dev like following:
==================================================================
BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120
Call Trace:
kasan_report.cold+0x83/0xdf
vlan_dev_real_dev+0xf9/0x120
is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0
is_eth_port_of_netdev_filter+0x28/0x40
ib_enum_roce_netdev+0x1a3/0x300
ib_enum_all_roce_netdevs+0xc7/0x140
netdevice_event_work_handler+0x9d/0x210
...
Freed by task 9288:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xfc/0x130
slab_free_freelist_hook+0xdd/0x240
kfree+0xe4/0x690
kvfree+0x42/0x50
device_release+0x9f/0x240
kobject_put+0x1c8/0x530
put_device+0x1b/0x30
free_netdev+0x370/0x540
ppp_destroy_interface+0x313/0x3d0
...
Move the put_device(real_dev) to vlan_dev_free(). Ensure
real_dev not be freed before vlan_dev unregistered.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: [email protected]
Signed-off-by: Ziyang Xuan <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/8021q/vlan.c | 3 ---
net/8021q/vlan_dev.c | 3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 15bbfaf943fd1..ad3780067a7d8 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -120,9 +120,6 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head)
}
vlan_vid_del(real_dev, vlan->vlan_proto, vlan_id);
-
- /* Get rid of the vlan's reference to real_dev */
- dev_put(real_dev);
}
int vlan_check_real_dev(struct net_device *real_dev,
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index ec8408d1638fb..c7eba7dab0938 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -813,6 +813,9 @@ static void vlan_dev_free(struct net_device *dev)
free_percpu(vlan->vlan_pcpu_stats);
vlan->vlan_pcpu_stats = NULL;
+
+ /* Get rid of the vlan's reference to real_dev */
+ dev_put(vlan->real_dev);
}
void vlan_setup(struct net_device *dev)
--
2.33.0
From: Quinn Tran <[email protected]>
[ Upstream commit 0b7a9fd934a68ebfc1019811b7bdc1742072ad7b ]
When user uses issue_lip to do link bounce, driver sends additional target
reset to remote device before resetting the link. The target reset would
affect other paths with active I/Os. This patch will remove the unnecessary
target reset.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine")
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_gbl.h | 2 --
drivers/scsi/qla2xxx/qla_mr.c | 23 -----------------------
drivers/scsi/qla2xxx/qla_os.c | 27 ++-------------------------
3 files changed, 2 insertions(+), 50 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index e39b4f2da73a0..3bc1850273421 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -158,7 +158,6 @@ extern int ql2xasynctmfenable;
extern int ql2xgffidenable;
extern int ql2xenabledif;
extern int ql2xenablehba_err_chk;
-extern int ql2xtargetreset;
extern int ql2xdontresethba;
extern uint64_t ql2xmaxlun;
extern int ql2xmdcapmask;
@@ -791,7 +790,6 @@ extern void qlafx00_abort_iocb(srb_t *, struct abort_iocb_entry_fx00 *);
extern void qlafx00_fxdisc_iocb(srb_t *, struct fxdisc_entry_fx00 *);
extern void qlafx00_timer_routine(scsi_qla_host_t *);
extern int qlafx00_rescan_isp(scsi_qla_host_t *);
-extern int qlafx00_loop_reset(scsi_qla_host_t *vha);
/* qla82xx related functions */
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index ca73066853255..7178646ee0f06 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -738,29 +738,6 @@ qlafx00_lun_reset(fc_port_t *fcport, uint64_t l, int tag)
return qla2x00_async_tm_cmd(fcport, TCF_LUN_RESET, l, tag);
}
-int
-qlafx00_loop_reset(scsi_qla_host_t *vha)
-{
- int ret;
- struct fc_port *fcport;
- struct qla_hw_data *ha = vha->hw;
-
- if (ql2xtargetreset) {
- list_for_each_entry(fcport, &vha->vp_fcports, list) {
- if (fcport->port_type != FCT_TARGET)
- continue;
-
- ret = ha->isp_ops->target_reset(fcport, 0, 0);
- if (ret != QLA_SUCCESS) {
- ql_dbg(ql_dbg_taskm, vha, 0x803d,
- "Bus Reset failed: Reset=%d "
- "d_id=%x.\n", ret, fcport->d_id.b24);
- }
- }
- }
- return QLA_SUCCESS;
-}
-
int
qlafx00_iospace_config(struct qla_hw_data *ha)
{
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 30ce84468c759..e7f73a167fbd6 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -197,12 +197,6 @@ MODULE_PARM_DESC(ql2xdbwr,
" 0 -- Regular doorbell.\n"
" 1 -- CAMRAM doorbell (faster).\n");
-int ql2xtargetreset = 1;
-module_param(ql2xtargetreset, int, S_IRUGO);
-MODULE_PARM_DESC(ql2xtargetreset,
- "Enable target reset."
- "Default is 1 - use hw defaults.");
-
int ql2xgffidenable;
module_param(ql2xgffidenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xgffidenable,
@@ -1652,27 +1646,10 @@ int
qla2x00_loop_reset(scsi_qla_host_t *vha)
{
int ret;
- struct fc_port *fcport;
struct qla_hw_data *ha = vha->hw;
- if (IS_QLAFX00(ha)) {
- return qlafx00_loop_reset(vha);
- }
-
- if (ql2xtargetreset == 1 && ha->flags.enable_target_reset) {
- list_for_each_entry(fcport, &vha->vp_fcports, list) {
- if (fcport->port_type != FCT_TARGET)
- continue;
-
- ret = ha->isp_ops->target_reset(fcport, 0, 0);
- if (ret != QLA_SUCCESS) {
- ql_dbg(ql_dbg_taskm, vha, 0x802c,
- "Bus Reset failed: Reset=%d "
- "d_id=%x.\n", ret, fcport->d_id.b24);
- }
- }
- }
-
+ if (IS_QLAFX00(ha))
+ return QLA_SUCCESS;
if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) {
atomic_set(&vha->loop_state, LOOP_DOWN);
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit a88e03cf3d190cf46bc4063a9b7efe87590de5f4 ]
snprintf() returns the number of bytes it would have printed if there
were space. But it does not count the NUL terminator. So that means
that if "count == copied" then this has already overflowed by one
character.
This bug likely isn't super harmful in real life.
Link: https://lkml.kernel.org/r/20210916130404.GA25094@kili
Fixes: c0265342bff4 ("zram: introduce zram memory tracking")
Signed-off-by: Dan Carpenter <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/zram/zram_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 7dce17fd59baa..0636df6b67db6 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -907,7 +907,7 @@ static ssize_t read_block_state(struct file *file, char __user *buf,
zram_test_flag(zram, index, ZRAM_HUGE) ? 'h' : '.',
zram_test_flag(zram, index, ZRAM_IDLE) ? 'i' : '.');
- if (count < copied) {
+ if (count <= copied) {
zram_slot_unlock(zram, index);
break;
}
--
2.33.0
From: John Fastabend <[email protected]>
[ Upstream commit b8b8315e39ffaca82e79d86dde26e9144addf66b ]
We do not need to handle unhash from BPF side we can simply wait for the
close to happen. The original concern was a socket could transition from
ESTABLISHED state to a new state while the BPF hook was still attached.
But, we convinced ourself this is no longer possible and we also improved
BPF sockmap to handle listen sockets so this is no longer a problem.
More importantly though there are cases where unhash is called when data is
in the receive queue. The BPF unhash logic will flush this data which is
wrong. To be correct it should keep the data in the receive queue and allow
a receiving application to continue reading the data. This may happen when
tcp_abort() is received for example. Instead of complicating the logic in
unhash simply moving all this to tcp_close() hook solves this.
Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Jussi Maki <[email protected]>
Reviewed-by: Jakub Sitnicki <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_bpf.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 9194070c67250..6b745ce4108c8 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -573,7 +573,6 @@ static void tcp_bpf_rebuild_protos(struct proto prot[TCP_BPF_NUM_CFGS],
struct proto *base)
{
prot[TCP_BPF_BASE] = *base;
- prot[TCP_BPF_BASE].unhash = sock_map_unhash;
prot[TCP_BPF_BASE].close = sock_map_close;
prot[TCP_BPF_BASE].recvmsg = tcp_bpf_recvmsg;
prot[TCP_BPF_BASE].stream_memory_read = tcp_bpf_stream_read;
--
2.33.0
From: Chengfeng Ye <[email protected]>
[ Upstream commit 9fec40f850658e00a14a7dd9e06f7fbc7e59cc4a ]
skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs,
but follow error handler branch when pn533_fill_fragment_skbs()
fails, skb is freed again, results in double free issue. Fix this
by not free skb in error path of pn533_fill_fragment_skbs.
Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks")
Fixes: 93ad42020c2d ("NFC: pn533: Target mode Tx fragmentation support")
Signed-off-by: Chengfeng Ye <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nfc/pn533/pn533.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
index 18e3435ab8f33..d2c0116157759 100644
--- a/drivers/nfc/pn533/pn533.c
+++ b/drivers/nfc/pn533/pn533.c
@@ -2258,7 +2258,7 @@ static int pn533_fill_fragment_skbs(struct pn533 *dev, struct sk_buff *skb)
frag = pn533_alloc_skb(dev, frag_size);
if (!frag) {
skb_queue_purge(&dev->fragment_skb);
- break;
+ return -ENOMEM;
}
if (!dev->tgt_mode) {
@@ -2329,7 +2329,7 @@ static int pn533_transceive(struct nfc_dev *nfc_dev,
/* jumbo frame ? */
if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
rc = pn533_fill_fragment_skbs(dev, skb);
- if (rc <= 0)
+ if (rc < 0)
goto error;
skb = skb_dequeue(&dev->fragment_skb);
@@ -2401,7 +2401,7 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb)
/* let's split in multiple chunks if size's too big */
if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
rc = pn533_fill_fragment_skbs(dev, skb);
- if (rc <= 0)
+ if (rc < 0)
goto error;
/* get the first skb */
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit c7c386fbc20262c1d911c615c65db6a58667d92c ]
gcc warns about undefined behavior the vmalloc code when building
with CONFIG_ARM64_PA_BITS_52, when the 'idx++' in the argument to
__phys_to_pte_val() is evaluated twice:
mm/vmalloc.c: In function 'vmap_pfn_apply':
mm/vmalloc.c:2800:58: error: operation on 'data->idx' may be undefined [-Werror=sequence-point]
2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot));
| ~~~~~~~~~^~
arch/arm64/include/asm/pgtable-types.h:25:37: note: in definition of macro '__pte'
25 | #define __pte(x) ((pte_t) { (x) } )
| ^
arch/arm64/include/asm/pgtable.h:80:15: note: in expansion of macro '__phys_to_pte_val'
80 | __pte(__phys_to_pte_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
| ^~~~~~~~~~~~~~~~~
mm/vmalloc.c:2800:30: note: in expansion of macro 'pfn_pte'
2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot));
| ^~~~~~~
I have no idea why this never showed up earlier, but the safest
workaround appears to be changing those macros into inline functions
so the arguments get evaluated only once.
Cc: Matthew Wilcox <[email protected]>
Fixes: 75387b92635e ("arm64: handle 52-bit physical addresses in page table entries")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/pgtable.h | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 10ffbc96ac31f..f3a70dc7c5942 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -69,9 +69,15 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
* page table entry, taking care of 52-bit addresses.
*/
#ifdef CONFIG_ARM64_PA_BITS_52
-#define __pte_to_phys(pte) \
- ((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 36))
-#define __phys_to_pte_val(phys) (((phys) | ((phys) >> 36)) & PTE_ADDR_MASK)
+static inline phys_addr_t __pte_to_phys(pte_t pte)
+{
+ return (pte_val(pte) & PTE_ADDR_LOW) |
+ ((pte_val(pte) & PTE_ADDR_HIGH) << 36);
+}
+static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
+{
+ return (phys | (phys >> 36)) & PTE_ADDR_MASK;
+}
#else
#define __pte_to_phys(pte) (pte_val(pte) & PTE_ADDR_MASK)
#define __phys_to_pte_val(phys) (phys)
--
2.33.0
From: Quinn Tran <[email protected]>
[ Upstream commit bb2ca6b3f09ac20e8357d257d0557ab5ddf6adcd ]
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or
entire fabric was disturbed, current driver does not set the scan_need flag
to indicate a session was affected by the disturbance. This in turn can
lead to I/O timeout and delay of relogin. Hence initiate relogin in the
event of fabric disturbance.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 1560bafdff9e ("scsi: qla2xxx: Use complete switch scan for RSCN events")
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 56 +++++++++++++++++++++++++++------
1 file changed, 46 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index e893b42e51a35..5bbdaefb44efc 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1708,16 +1708,52 @@ void qla2x00_handle_rscn(scsi_qla_host_t *vha, struct event_arg *ea)
fc_port_t *fcport;
unsigned long flags;
- fcport = qla2x00_find_fcport_by_nportid(vha, &ea->id, 1);
- if (fcport) {
- if (fcport->flags & FCF_FCP2_DEVICE) {
- ql_dbg(ql_dbg_disc, vha, 0x2115,
- "Delaying session delete for FCP2 portid=%06x %8phC ",
- fcport->d_id.b24, fcport->port_name);
- return;
- }
- fcport->scan_needed = 1;
- fcport->rscn_gen++;
+ switch (ea->id.b.rsvd_1) {
+ case RSCN_PORT_ADDR:
+ fcport = qla2x00_find_fcport_by_nportid(vha, &ea->id, 1);
+ if (fcport) {
+ if (fcport->flags & FCF_FCP2_DEVICE) {
+ ql_dbg(ql_dbg_disc, vha, 0x2115,
+ "Delaying session delete for FCP2 portid=%06x %8phC ",
+ fcport->d_id.b24, fcport->port_name);
+ return;
+ }
+ fcport->scan_needed = 1;
+ fcport->rscn_gen++;
+ }
+ break;
+ case RSCN_AREA_ADDR:
+ list_for_each_entry(fcport, &vha->vp_fcports, list) {
+ if (fcport->flags & FCF_FCP2_DEVICE)
+ continue;
+
+ if ((ea->id.b24 & 0xffff00) == (fcport->d_id.b24 & 0xffff00)) {
+ fcport->scan_needed = 1;
+ fcport->rscn_gen++;
+ }
+ }
+ break;
+ case RSCN_DOM_ADDR:
+ list_for_each_entry(fcport, &vha->vp_fcports, list) {
+ if (fcport->flags & FCF_FCP2_DEVICE)
+ continue;
+
+ if ((ea->id.b24 & 0xff0000) == (fcport->d_id.b24 & 0xff0000)) {
+ fcport->scan_needed = 1;
+ fcport->rscn_gen++;
+ }
+ }
+ break;
+ case RSCN_FAB_ADDR:
+ default:
+ list_for_each_entry(fcport, &vha->vp_fcports, list) {
+ if (fcport->flags & FCF_FCP2_DEVICE)
+ continue;
+
+ fcport->scan_needed = 1;
+ fcport->rscn_gen++;
+ }
+ break;
}
spin_lock_irqsave(&vha->work_lock, flags);
--
2.33.0
From: Dust Li <[email protected]>
[ Upstream commit e5d5aadcf3cd59949316df49c27cb21788d7efe4 ]
We got the following WARNING when running ab/nginx
test with RDMA link flapping (up-down-up).
The reason is when smc_sock fallback and at linkdown
happens simultaneously, we may got the following situation:
__smc_lgr_terminate()
--> smc_conn_kill()
--> smc_close_active_abort()
smc_sock->sk_state = SMC_CLOSED
sock_put(smc_sock)
smc_sock was set to SMC_CLOSED and sock_put() been called
when terminate the link group. But later application call
close() on the socket, then we got:
__smc_release():
if (smc_sock->fallback)
smc_sock->sk_state = SMC_CLOSED
sock_put(smc_sock)
Again we set the smc_sock to CLOSED through it's already
in CLOSED state, and double put the refcnt, so the following
warning happens:
refcount_t: underflow; use-after-free.
WARNING: CPU: 5 PID: 860 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0
Modules linked in:
CPU: 5 PID: 860 Comm: nginx Not tainted 5.10.46+ #403
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
RIP: 0010:refcount_warn_saturate+0x8d/0xf0
Code: 05 5c 1e b5 01 01 e8 52 25 bc ff 0f 0b c3 80 3d 4f 1e b5 01 00 75 ad 48
RSP: 0018:ffffc90000527e50 EFLAGS: 00010286
RAX: 0000000000000026 RBX: ffff8881300df2c0 RCX: 0000000000000027
RDX: 0000000000000000 RSI: ffff88813bd58040 RDI: ffff88813bd58048
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000001
R10: ffff8881300df2c0 R11: ffffc90000527c78 R12: ffff8881300df340
R13: ffff8881300df930 R14: ffff88810b3dad80 R15: ffff8881300df4f8
FS: 00007f739de8fb80(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000a01b008 CR3: 0000000111b64003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
smc_release+0x353/0x3f0
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x93/0x230
task_work_run+0x65/0xa0
exit_to_user_mode_prepare+0xf9/0x100
syscall_exit_to_user_mode+0x27/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This patch adds check in __smc_release() to make
sure we won't do an extra sock_put() and set the
socket to CLOSED when its already in CLOSED state.
Fixes: 51f1de79ad8e (net/smc: replace sock_put worker by socket refcounting)
Signed-off-by: Dust Li <[email protected]>
Reviewed-by: Tony Lu <[email protected]>
Signed-off-by: Dust Li <[email protected]>
Acked-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/af_smc.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index cc2af94e74507..cfb5b9be0569d 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -146,14 +146,18 @@ static int __smc_release(struct smc_sock *smc)
sock_set_flag(sk, SOCK_DEAD);
sk->sk_shutdown |= SHUTDOWN_MASK;
} else {
- if (sk->sk_state != SMC_LISTEN && sk->sk_state != SMC_INIT)
- sock_put(sk); /* passive closing */
- if (sk->sk_state == SMC_LISTEN) {
- /* wake up clcsock accept */
- rc = kernel_sock_shutdown(smc->clcsock, SHUT_RDWR);
+ if (sk->sk_state != SMC_CLOSED) {
+ if (sk->sk_state != SMC_LISTEN &&
+ sk->sk_state != SMC_INIT)
+ sock_put(sk); /* passive closing */
+ if (sk->sk_state == SMC_LISTEN) {
+ /* wake up clcsock accept */
+ rc = kernel_sock_shutdown(smc->clcsock,
+ SHUT_RDWR);
+ }
+ sk->sk_state = SMC_CLOSED;
+ sk->sk_state_change(sk);
}
- sk->sk_state = SMC_CLOSED;
- sk->sk_state_change(sk);
smc_restore_fallback_changes(smc);
}
--
2.33.0
From: Daniel Borkmann <[email protected]>
[ Upstream commit 3dc20f4762c62d3b3f0940644881ed818aa7b2f5 ]
Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT
state and NTF_USE flag with a dynamic NUD state from a user space control plane.
Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing
neighbor entry in combination with NTF_USE flag.
This is due to the latter directly calling into neigh_event_send() without any
meta data updates as happening in __neigh_update(). Thus, to enable this use
case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the
NUD_PERMANENT state in particular so that a latter neigh_event_send() is able
to re-resolve a neighbor entry.
Before fix, NUD_PERMANENT -> NUD_* & NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
As can be seen, despite the admin-triggered replace, the entry remains in the
NUD_PERMANENT state.
After fix, NUD_PERMANENT -> NUD_* & NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
After the fix, the admin-triggered replace switches to a dynamic state from
the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can
transition back from there, if needed, into NUD_PERMANENT.
Similar before/after behavior can be observed for below transitions:
Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[..]
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Roopa Prabhu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/neighbour.h | 1 +
net/core/neighbour.c | 22 +++++++++++++---------
2 files changed, 14 insertions(+), 9 deletions(-)
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index 990f9b1d17092..d5767e25509cc 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -253,6 +253,7 @@ static inline void *neighbour_priv(const struct neighbour *n)
#define NEIGH_UPDATE_F_OVERRIDE 0x00000001
#define NEIGH_UPDATE_F_WEAK_OVERRIDE 0x00000002
#define NEIGH_UPDATE_F_OVERRIDE_ISROUTER 0x00000004
+#define NEIGH_UPDATE_F_USE 0x10000000
#define NEIGH_UPDATE_F_EXT_LEARNED 0x20000000
#define NEIGH_UPDATE_F_ISROUTER 0x40000000
#define NEIGH_UPDATE_F_ADMIN 0x80000000
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 01e243a578e9c..8eec7667aa761 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1222,7 +1222,7 @@ static void neigh_update_hhs(struct neighbour *neigh)
lladdr instead of overriding it
if it is different.
NEIGH_UPDATE_F_ADMIN means that the change is administrative.
-
+ NEIGH_UPDATE_F_USE means that the entry is user triggered.
NEIGH_UPDATE_F_OVERRIDE_ISROUTER allows to override existing
NTF_ROUTER flag.
NEIGH_UPDATE_F_ISROUTER indicates if the neighbour is known as
@@ -1260,6 +1260,12 @@ static int __neigh_update(struct neighbour *neigh, const u8 *lladdr,
goto out;
ext_learn_change = neigh_update_ext_learned(neigh, flags, ¬ify);
+ if (flags & NEIGH_UPDATE_F_USE) {
+ new = old & ~NUD_PERMANENT;
+ neigh->nud_state = new;
+ err = 0;
+ goto out;
+ }
if (!(new & NUD_VALID)) {
neigh_del_timer(neigh);
@@ -1971,22 +1977,20 @@ static int neigh_add(struct sk_buff *skb, struct nlmsghdr *nlh,
if (protocol)
neigh->protocol = protocol;
-
if (ndm->ndm_flags & NTF_EXT_LEARNED)
flags |= NEIGH_UPDATE_F_EXT_LEARNED;
-
if (ndm->ndm_flags & NTF_ROUTER)
flags |= NEIGH_UPDATE_F_ISROUTER;
+ if (ndm->ndm_flags & NTF_USE)
+ flags |= NEIGH_UPDATE_F_USE;
- if (ndm->ndm_flags & NTF_USE) {
+ err = __neigh_update(neigh, lladdr, ndm->ndm_state, flags,
+ NETLINK_CB(skb).portid, extack);
+ if (!err && ndm->ndm_flags & NTF_USE) {
neigh_event_send(neigh, NULL);
err = 0;
- } else
- err = __neigh_update(neigh, lladdr, ndm->ndm_state, flags,
- NETLINK_CB(skb).portid, extack);
-
+ }
neigh_release(neigh);
-
out:
return err;
}
--
2.33.0
From: "Naveen N. Rao" <[email protected]>
upstream commit 3832ba4e283d7052b783dab8311df7e3590fed93
Add checks to ensure that we never emit branch instructions with
truncated branch offsets.
Suggested-by: Michael Ellerman <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Tested-by: Johan Almbladh <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Acked-by: Song Liu <[email protected]>
Acked-by: Johan Almbladh <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
[drop ppc32 changes]
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/net/bpf_jit.h | 26 ++++++++++++++++++++------
arch/powerpc/net/bpf_jit_comp64.c | 8 ++++++--
2 files changed, 26 insertions(+), 8 deletions(-)
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -12,6 +12,7 @@
#include <asm/types.h>
#include <asm/ppc-opcode.h>
+#include <asm/code-patching.h>
#ifdef PPC64_ELF_ABI_v1
#define FUNCTION_DESCR_SIZE 24
@@ -24,13 +25,26 @@
#define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr)
/* Long jump; (unconditional 'branch') */
-#define PPC_JMP(dest) EMIT(PPC_INST_BRANCH | \
- (((dest) - (ctx->idx * 4)) & 0x03fffffc))
+#define PPC_JMP(dest) \
+ do { \
+ long offset = (long)(dest) - (ctx->idx * 4); \
+ if (!is_offset_in_branch_range(offset)) { \
+ pr_err_ratelimited("Branch offset 0x%lx (@%u) out of range\n", offset, ctx->idx); \
+ return -ERANGE; \
+ } \
+ EMIT(PPC_INST_BRANCH | (offset & 0x03fffffc)); \
+ } while (0)
/* "cond" here covers BO:BI fields. */
-#define PPC_BCC_SHORT(cond, dest) EMIT(PPC_INST_BRANCH_COND | \
- (((cond) & 0x3ff) << 16) | \
- (((dest) - (ctx->idx * 4)) & \
- 0xfffc))
+#define PPC_BCC_SHORT(cond, dest) \
+ do { \
+ long offset = (long)(dest) - (ctx->idx * 4); \
+ if (!is_offset_in_cond_branch_range(offset)) { \
+ pr_err_ratelimited("Conditional branch offset 0x%lx (@%u) out of range\n", offset, ctx->idx); \
+ return -ERANGE; \
+ } \
+ EMIT(PPC_INST_BRANCH_COND | (((cond) & 0x3ff) << 16) | (offset & 0xfffc)); \
+ } while (0)
+
/* Sign-extended 32-bit immediate load */
#define PPC_LI32(d, i) do { \
if ((int)(uintptr_t)(i) >= -32768 && \
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -224,7 +224,7 @@ static void bpf_jit_emit_func_call_rel(u
EMIT(PPC_RAW_BLRL());
}
-static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out)
+static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out)
{
/*
* By now, the eBPF program has already setup parameters in r3, r4 and r5
@@ -285,7 +285,9 @@ static void bpf_jit_emit_tail_call(u32 *
bpf_jit_emit_common_epilogue(image, ctx);
EMIT(PPC_RAW_BCTR());
+
/* out: */
+ return 0;
}
/* Assemble the body code between the prologue & epilogue */
@@ -1010,7 +1012,9 @@ cond_branch:
*/
case BPF_JMP | BPF_TAIL_CALL:
ctx->seen |= SEEN_TAILCALL;
- bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]);
+ ret = bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]);
+ if (ret < 0)
+ return ret;
break;
default:
From: Rahul Lakkireddy <[email protected]>
[ Upstream commit 4ca110bf8d9b31a60f8f8ff6706ea147d38ad97c ]
Ensure diagnostics monitoring support is implemented for the SFF 8472
compliant port module and set the correct length for ethtool port
module eeprom read.
Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump")
Signed-off-by: Manoj Malviya <[email protected]>
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 7 +++++--
drivers/net/ethernet/chelsio/cxgb4/t4_hw.h | 2 ++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 83ed10ac86606..7080cb6c83e4a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -2011,12 +2011,15 @@ static int cxgb4_get_module_info(struct net_device *dev,
if (ret)
return ret;
- if (!sff8472_comp || (sff_diag_type & 4)) {
+ if (!sff8472_comp || (sff_diag_type & SFP_DIAG_ADDRMODE)) {
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8472;
- modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ if (sff_diag_type & SFP_DIAG_IMPLEMENTED)
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ else
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN / 2;
}
break;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
index 002fc62ea7262..63bc956d20376 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
@@ -293,6 +293,8 @@ enum {
#define I2C_PAGE_SIZE 0x100
#define SFP_DIAG_TYPE_ADDR 0x5c
#define SFP_DIAG_TYPE_LEN 0x1
+#define SFP_DIAG_ADDRMODE BIT(2)
+#define SFP_DIAG_IMPLEMENTED BIT(6)
#define SFF_8472_COMP_ADDR 0x5e
#define SFF_8472_COMP_LEN 0x1
#define SFF_REV_ADDR 0x1
--
2.33.0
From: Marek Vasut <[email protected]>
commit 33a5471f8da976bf271a1ebbd6b9d163cb0cb6aa upstream.
The note in c2adda27d202f ("video: backlight: Add of_find_backlight helper
in backlight.c") says that gpio-backlight uses brightness as power state.
This has been fixed since in ec665b756e6f7 ("backlight: gpio-backlight:
Correct initial power state handling") and other backlight drivers do not
require this workaround. Drop the workaround.
This fixes the case where e.g. pwm-backlight can perfectly well be set to
brightness 0 on boot in DT, which without this patch leads to the display
brightness to be max instead of off.
Fixes: c2adda27d202f ("video: backlight: Add of_find_backlight helper in backlight.c")
Cc: <[email protected]> # 5.4+
Cc: <[email protected]> # 4.19.x: ec665b756e6f7: backlight: gpio-backlight: Correct initial power state handling
Signed-off-by: Marek Vasut <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/backlight/backlight.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -688,12 +688,6 @@ static struct backlight_device *of_find_
of_node_put(np);
if (!bd)
return ERR_PTR(-EPROBE_DEFER);
- /*
- * Note: gpio_backlight uses brightness as
- * power state during probe
- */
- if (!bd->props.brightness)
- bd->props.brightness = bd->props.max_brightness;
}
}
From: Vineeth Vijayan <[email protected]>
commit a4751f157c194431fae9e9c493f456df8272b871 upstream.
Check the validity of subchanel before reading other fields in
the schib.
Fixes: d3683c055212 ("s390/cio: add dev_busid sysfs entry for each subchannel")
CC: <[email protected]>
Reported-by: Cornelia Huck <[email protected]>
Signed-off-by: Vineeth Vijayan <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/cio/css.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -433,8 +433,8 @@ static ssize_t dev_busid_show(struct dev
struct subchannel *sch = to_subchannel(dev);
struct pmcw *pmcw = &sch->schib.pmcw;
- if ((pmcw->st == SUBCHANNEL_TYPE_IO ||
- pmcw->st == SUBCHANNEL_TYPE_MSG) && pmcw->dnv)
+ if ((pmcw->st == SUBCHANNEL_TYPE_IO && pmcw->dnv) ||
+ (pmcw->st == SUBCHANNEL_TYPE_MSG && pmcw->w))
return sysfs_emit(buf, "0.%x.%04x\n", sch->schid.ssid,
pmcw->dev);
else
From: Jack Andersen <[email protected]>
commit 313c84b5ae4104e48c661d5d706f9f4c425fd50f upstream.
This patch extends the DLN2 driver; adding cell for adc_dln2 module.
The original patch[1] fell through the cracks when the driver was added
so ADC has never actually been usable. That patch did not have ACPI
support which was added in v5.9, so the oldest supported version this
current patch can be backported to is 5.10.
[1] https://www.spinics.net/lists/linux-iio/msg33975.html
Cc: <[email protected]> # 5.10+
Signed-off-by: Jack Andersen <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mfd/dln2.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/mfd/dln2.c
+++ b/drivers/mfd/dln2.c
@@ -50,6 +50,7 @@ enum dln2_handle {
DLN2_HANDLE_GPIO,
DLN2_HANDLE_I2C,
DLN2_HANDLE_SPI,
+ DLN2_HANDLE_ADC,
DLN2_HANDLES
};
@@ -653,6 +654,7 @@ enum {
DLN2_ACPI_MATCH_GPIO = 0,
DLN2_ACPI_MATCH_I2C = 1,
DLN2_ACPI_MATCH_SPI = 2,
+ DLN2_ACPI_MATCH_ADC = 3,
};
static struct dln2_platform_data dln2_pdata_gpio = {
@@ -683,6 +685,16 @@ static struct mfd_cell_acpi_match dln2_a
.adr = DLN2_ACPI_MATCH_SPI,
};
+/* Only one ADC port supported */
+static struct dln2_platform_data dln2_pdata_adc = {
+ .handle = DLN2_HANDLE_ADC,
+ .port = 0,
+};
+
+static struct mfd_cell_acpi_match dln2_acpi_match_adc = {
+ .adr = DLN2_ACPI_MATCH_ADC,
+};
+
static const struct mfd_cell dln2_devs[] = {
{
.name = "dln2-gpio",
@@ -702,6 +714,12 @@ static const struct mfd_cell dln2_devs[]
.platform_data = &dln2_pdata_spi,
.pdata_size = sizeof(struct dln2_platform_data),
},
+ {
+ .name = "dln2-adc",
+ .acpi_match = &dln2_acpi_match_adc,
+ .platform_data = &dln2_pdata_adc,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
};
static void dln2_stop(struct dln2_dev *dln2)
From: "Naveen N. Rao" <[email protected]>
upstream commit 4549c3ea3160fa8b3f37dfe2f957657bb265eda9
Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.
Signed-off-by: Naveen N. Rao <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/code-patching.h | 1 +
arch/powerpc/lib/code-patching.c | 7 ++++++-
arch/powerpc/net/bpf_jit.h | 7 +------
3 files changed, 8 insertions(+), 7 deletions(-)
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -23,6 +23,7 @@
#define BRANCH_ABSOLUTE 0x2
bool is_offset_in_branch_range(long offset);
+bool is_offset_in_cond_branch_range(long offset);
int create_branch(struct ppc_inst *instr, const struct ppc_inst *addr,
unsigned long target, int flags);
int create_cond_branch(struct ppc_inst *instr, const struct ppc_inst *addr,
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -230,6 +230,11 @@ bool is_offset_in_branch_range(long offs
return (offset >= -0x2000000 && offset <= 0x1fffffc && !(offset & 0x3));
}
+bool is_offset_in_cond_branch_range(long offset)
+{
+ return offset >= -0x8000 && offset <= 0x7fff && !(offset & 0x3);
+}
+
/*
* Helper to check if a given instruction is a conditional branch
* Derived from the conditional checks in analyse_instr()
@@ -283,7 +288,7 @@ int create_cond_branch(struct ppc_inst *
offset = offset - (unsigned long)addr;
/* Check we can represent the target in the instruction format */
- if (offset < -0x8000 || offset > 0x7FFF || offset & 0x3)
+ if (!is_offset_in_cond_branch_range(offset))
return 1;
/* Mask out the flags and target, so they don't step on each other. */
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -71,11 +71,6 @@
#define PPC_FUNC_ADDR(d,i) do { PPC_LI32(d, i); } while(0)
#endif
-static inline bool is_nearbranch(int offset)
-{
- return (offset < 32768) && (offset >= -32768);
-}
-
/*
* The fly in the ointment of code size changing from pass to pass is
* avoided by padding the short branch case with a NOP. If code size differs
@@ -84,7 +79,7 @@ static inline bool is_nearbranch(int off
* state.
*/
#define PPC_BCC(cond, dest) do { \
- if (is_nearbranch((dest) - (ctx->idx * 4))) { \
+ if (is_offset_in_cond_branch_range((long)(dest) - (ctx->idx * 4))) { \
PPC_BCC_SHORT(cond, dest); \
EMIT(PPC_RAW_NOP()); \
} else { \
From: Jaegeuk Kim <[email protected]>
commit 92d602bc7177325e7453189a22e0c8764ed3453e upstream.
We use inline_dentry which requires to allocate dentry page when adding a link.
If we allow to reclaim memory from filesystem, we do down_read(&sbi->cp_rwsem)
twice by f2fs_lock_op(). I think this should be okay, but how about stopping
the lockdep complaint [1]?
f2fs_create()
- f2fs_lock_op()
- f2fs_do_add_link()
- __f2fs_find_entry
- f2fs_get_read_data_page()
-> kswapd
- shrink_node
- f2fs_evict_inode
- f2fs_lock_op()
[1]
fs_reclaim
){+.+.}-{0:0}
:
kswapd0: lock_acquire+0x114/0x394
kswapd0: __fs_reclaim_acquire+0x40/0x50
kswapd0: prepare_alloc_pages+0x94/0x1ec
kswapd0: __alloc_pages_nodemask+0x78/0x1b0
kswapd0: pagecache_get_page+0x2e0/0x57c
kswapd0: f2fs_get_read_data_page+0xc0/0x394
kswapd0: f2fs_find_data_page+0xa4/0x23c
kswapd0: find_in_level+0x1a8/0x36c
kswapd0: __f2fs_find_entry+0x70/0x100
kswapd0: f2fs_do_add_link+0x84/0x1ec
kswapd0: f2fs_mkdir+0xe4/0x1e4
kswapd0: vfs_mkdir+0x110/0x1c0
kswapd0: do_mkdirat+0xa4/0x160
kswapd0: __arm64_sys_mkdirat+0x24/0x34
kswapd0: el0_svc_common.llvm.17258447499513131576+0xc4/0x1e8
kswapd0: do_el0_svc+0x28/0xa0
kswapd0: el0_svc+0x24/0x38
kswapd0: el0_sync_handler+0x88/0xec
kswapd0: el0_sync+0x1c0/0x200
kswapd0:
-> #1
(
&sbi->cp_rwsem
){++++}-{3:3}
:
kswapd0: lock_acquire+0x114/0x394
kswapd0: down_read+0x7c/0x98
kswapd0: f2fs_do_truncate_blocks+0x78/0x3dc
kswapd0: f2fs_truncate+0xc8/0x128
kswapd0: f2fs_evict_inode+0x2b8/0x8b8
kswapd0: evict+0xd4/0x2f8
kswapd0: iput+0x1c0/0x258
kswapd0: do_unlinkat+0x170/0x2a0
kswapd0: __arm64_sys_unlinkat+0x4c/0x68
kswapd0: el0_svc_common.llvm.17258447499513131576+0xc4/0x1e8
kswapd0: do_el0_svc+0x28/0xa0
kswapd0: el0_svc+0x24/0x38
kswapd0: el0_sync_handler+0x88/0xec
kswapd0: el0_sync+0x1c0/0x200
Cc: [email protected]
Fixes: bdbc90fa55af ("f2fs: don't put dentry page in pagecache into highmem")
Reviewed-by: Chao Yu <[email protected]>
Reviewed-by: Stanley Chu <[email protected]>
Reviewed-by: Light Hsieh <[email protected]>
Tested-by: Light Hsieh <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/inode.c | 2 +-
fs/f2fs/namei.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -511,7 +511,7 @@ make_now:
inode->i_op = &f2fs_dir_inode_operations;
inode->i_fop = &f2fs_dir_operations;
inode->i_mapping->a_ops = &f2fs_dblock_aops;
- inode_nohighmem(inode);
+ mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
} else if (S_ISLNK(inode->i_mode)) {
if (file_is_encrypt(inode))
inode->i_op = &f2fs_encrypted_symlink_inode_operations;
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -744,7 +744,7 @@ static int f2fs_mkdir(struct inode *dir,
inode->i_op = &f2fs_dir_inode_operations;
inode->i_fop = &f2fs_dir_operations;
inode->i_mapping->a_ops = &f2fs_dblock_aops;
- inode_nohighmem(inode);
+ mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
set_inode_flag(inode, FI_INC_LINK);
f2fs_lock_op(sbi);
From: Halil Pasic <[email protected]>
commit ad9a14517263a16af040598c7920c09ca9670a31 upstream.
Since commit 48720ba56891 ("virtio/s390: use DMA memory for ccw I/O and
classic notifiers") we were supposed to make sure that
virtio_ccw_release_dev() completes before the ccw device and the
attached dma pool are torn down, but unfortunately we did not. Before
that commit it used to be OK to delay cleaning up the memory allocated
by virtio-ccw indefinitely (which isn't really intuitive for guys used
to destruction happens in reverse construction order), but now we
trigger a BUG_ON if the genpool is destroyed before all memory allocated
from it is deallocated. Which brings down the guest. We can observe this
problem, when unregister_virtio_device() does not give up the last
reference to the virtio_device (e.g. because a virtio-scsi attached scsi
disk got removed without previously unmounting its previously mounted
partition).
To make sure that the genpool is only destroyed after all the necessary
freeing is done let us take a reference on the ccw device on each
ccw_device_dma_zalloc() and give it up on each ccw_device_dma_free().
Actually there are multiple approaches to fixing the problem at hand
that can work. The upside of this one is that it is the safest one while
remaining simple. We don't crash the guest even if the driver does not
pair allocations and frees. The downside is the reference counting
overhead, that the reference counting for ccw devices becomes more
complex, in a sense that we need to pair the calls to the aforementioned
functions for it to be correct, and that if we happen to leak, we leak
more than necessary (the whole ccw device instead of just the genpool).
Some alternatives to this approach are taking a reference in
virtio_ccw_online() and giving it up in virtio_ccw_release_dev() or
making sure virtio_ccw_release_dev() completes its work before
virtio_ccw_remove() returns. The downside of these approaches is that
these are less safe against programming errors.
Cc: <[email protected]> # v5.3
Signed-off-by: Halil Pasic <[email protected]>
Fixes: 48720ba56891 ("virtio/s390: use DMA memory for ccw I/O and classic notifiers")
Reported-by: [email protected]
Reviewed-by: Vineeth Vijayan <[email protected]>
Acked-by: Cornelia Huck <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/cio/device_ops.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -825,13 +825,23 @@ EXPORT_SYMBOL_GPL(ccw_device_get_chid);
*/
void *ccw_device_dma_zalloc(struct ccw_device *cdev, size_t size)
{
- return cio_gp_dma_zalloc(cdev->private->dma_pool, &cdev->dev, size);
+ void *addr;
+
+ if (!get_device(&cdev->dev))
+ return NULL;
+ addr = cio_gp_dma_zalloc(cdev->private->dma_pool, &cdev->dev, size);
+ if (IS_ERR_OR_NULL(addr))
+ put_device(&cdev->dev);
+ return addr;
}
EXPORT_SYMBOL(ccw_device_dma_zalloc);
void ccw_device_dma_free(struct ccw_device *cdev, void *cpu_addr, size_t size)
{
+ if (!cpu_addr)
+ return;
cio_gp_dma_free(cdev->private->dma_pool, cpu_addr, size);
+ put_device(&cdev->dev);
}
EXPORT_SYMBOL(ccw_device_dma_free);
From: Miquel Raynal <[email protected]>
commit f16b7d2a5e810fcf4b15d096246d0d445da9cc88 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 8fc6f1f042b2 ("mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/pasemi_nand.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -76,9 +76,8 @@ static int pasemi_device_ready(struct na
static int pasemi_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -155,6 +154,13 @@ static int pasemi_nand_probe(struct plat
/* Enable the following for a flash based bad block table */
chip->bbt_options = NAND_BBT_USE_FLASH;
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
/* Scan to find existence of the device */
err = nand_scan(chip, 1);
if (err)
From: Miquel Raynal <[email protected]>
commit f9d8570b7fd6f4f08528ce2f5e39787a8a260cd6 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 6dd09f775b72 ("mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/mpc5121_nfc.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/mpc5121_nfc.c
+++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
@@ -605,9 +605,8 @@ static void mpc5121_nfc_free(struct devi
static int mpc5121_nfc_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -772,6 +771,13 @@ static int mpc5121_nfc_probe(struct plat
goto error;
}
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
/* Detect NAND chips */
retval = nand_scan(chip, be32_to_cpup(chips_no));
if (retval) {
From: Willem de Bruijn <[email protected]>
[ Upstream commit d336509cb9d03970911878bb77f0497f64fda061 ]
The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.
This broke support for passing port (-p) on its own.
Configure sockaddr after parsing all arguments.
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/udpgso_bench_rx.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/udpgso_bench_rx.c b/tools/testing/selftests/net/udpgso_bench_rx.c
index 76a24052f4b47..6a193425c367f 100644
--- a/tools/testing/selftests/net/udpgso_bench_rx.c
+++ b/tools/testing/selftests/net/udpgso_bench_rx.c
@@ -293,19 +293,17 @@ static void usage(const char *filepath)
static void parse_opts(int argc, char **argv)
{
+ const char *bind_addr = NULL;
int c;
- /* bind to any by default */
- setup_sockaddr(PF_INET6, "::", &cfg_bind_addr);
while ((c = getopt(argc, argv, "4b:C:Gl:n:p:rR:S:tv")) != -1) {
switch (c) {
case '4':
cfg_family = PF_INET;
cfg_alen = sizeof(struct sockaddr_in);
- setup_sockaddr(PF_INET, "0.0.0.0", &cfg_bind_addr);
break;
case 'b':
- setup_sockaddr(cfg_family, optarg, &cfg_bind_addr);
+ bind_addr = optarg;
break;
case 'C':
cfg_connect_timeout_ms = strtoul(optarg, NULL, 0);
@@ -341,6 +339,11 @@ static void parse_opts(int argc, char **argv)
}
}
+ if (!bind_addr)
+ bind_addr = cfg_family == PF_INET6 ? "::" : "0.0.0.0";
+
+ setup_sockaddr(cfg_family, bind_addr, &cfg_bind_addr);
+
if (optind != argc)
usage(argv[0]);
--
2.33.0
From: Miquel Raynal <[email protected]>
commit b5b5b4dc6fcd8194b9dd38c8acdc5ab71adf44f8 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: f6341f6448e0 ("mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/gpio.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -163,9 +163,8 @@ static int gpio_nand_exec_op(struct nand
static int gpio_nand_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -365,6 +364,13 @@ static int gpio_nand_probe(struct platfo
if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
gpiod_direction_output(gpiomtd->nwp, 1);
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
ret = nand_scan(chip, 1);
if (ret)
goto err_wp;
From: Miquel Raynal <[email protected]>
commit 6bcd2960af1b7bacb2f1e710ab0c0b802d900501 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: d525914b5bd8 ("mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Cc: Jan Hoffmann <[email protected]>
Cc: Kestrel seventyfour <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Tested-by: Jan Hoffmann <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/xway_nand.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -148,9 +148,8 @@ static void xway_write_buf(struct nand_c
static int xway_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -219,6 +218,13 @@ static int xway_nand_probe(struct platfo
| NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
| cs_flag, EBU_NAND_CON);
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
/* Scan to find existence of the device */
err = nand_scan(&data->chip, 1);
if (err)
From: Miquel Raynal <[email protected]>
commit 194ac63de6ff56d30c48e3ac19c8a412f9c1408e upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 553508cec2e8 ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/orion_nand.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -85,9 +85,8 @@ static void orion_nand_read_buf(struct n
static int orion_nand_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -190,6 +189,13 @@ static int __init orion_nand_probe(struc
return ret;
}
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ nc->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
ret = nand_scan(nc, 1);
if (ret)
goto no_dev;
On Mon, 15 Nov 2021 17:55:25 +0100, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.10.80 release.
> There are 575 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Nov 2021 16:52:23 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.80-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.10.80-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
Hi!
> This is the start of the stable review cycle for the 5.10.80 release.
> There are 575 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
From: Aleksander Jan Bajkowski <[email protected]>
[ Upstream commit c12aa581f6d5e80c3c3675ab26a52c2b3b62f76e ]
Reading the DMA registers immediately after the reset causes
Data Bus Error. Adding a small delay fixes this issue.
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/xway/dma.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index aeb1b989cd4ee..24c6267f78698 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -11,6 +11,7 @@
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <lantiq_soc.h>
@@ -221,6 +222,8 @@ ltq_dma_init(struct platform_device *pdev)
clk_enable(clk);
ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+ usleep_range(1, 10);
+
/* disable all interrupts */
ltq_dma_w32(0, LTQ_DMA_IRNEN);
--
2.33.0
From: Kan Liang <[email protected]>
commit 496a18f09374ad89b3ab4366019bc3975db90234 upstream.
There are three channels on a Ice Lake server, but only two channels
will ever be active. Current perf only enables two channels.
Support the extra IMC channel, which may be activated on some Ice Lake
machines. For a non-activated channel, the SW can still access it. The
write will be ignored by the HW. 0 is always returned for the reading.
Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -444,7 +444,7 @@
#define ICX_M3UPI_PCI_PMON_BOX_CTL 0xa0
/* ICX IMC */
-#define ICX_NUMBER_IMC_CHN 2
+#define ICX_NUMBER_IMC_CHN 3
#define ICX_IMC_MEM_STRIDE 0x4
DEFINE_UNCORE_FORMAT_ATTR(event, event, "config:0-7");
@@ -5228,7 +5228,7 @@ static struct intel_uncore_ops icx_uncor
static struct intel_uncore_type icx_uncore_imc = {
.name = "imc",
.num_counters = 4,
- .num_boxes = 8,
+ .num_boxes = 12,
.perf_ctr_bits = 48,
.fixed_ctr_bits = 48,
.fixed_ctr = SNR_IMC_MMIO_PMON_FIXED_CTR,
On 2021/11/16 0:55, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.80 release.
> There are 575 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Nov 2021 16:52:23 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.80-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.10.80-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.80-rc1
Commit: 498eb27d1093fbde123a46948f9aef0a7dd41950
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9020
passed: 9020
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9020
passed: 9020
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
From: Trond Myklebust <[email protected]>
commit ea7a1019d8baf8503ecd6e3ec8436dec283569e6 upstream.
The premise of commit 6f9f17287e78 ("SUNRPC: Mitigate cond_resched() in
xprt_transmit()") was that cond_resched() is expensive and unnecessary
when there has been just a single send.
The point of cond_resched() is to ensure that tasks that should pre-empt
this one get a chance to do so when it is safe to do so. The code prior
to commit 6f9f17287e78 failed to take into account that it was keeping a
rpc_task pinned for longer than it needed to, and so rather than doing a
full revert, let's just move the cond_resched.
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/xprt.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1552,15 +1552,14 @@ xprt_transmit(struct rpc_task *task)
{
struct rpc_rqst *next, *req = task->tk_rqstp;
struct rpc_xprt *xprt = req->rq_xprt;
- int counter, status;
+ int status;
spin_lock(&xprt->queue_lock);
- counter = 0;
- while (!list_empty(&xprt->xmit_queue)) {
- if (++counter == 20)
+ for (;;) {
+ next = list_first_entry_or_null(&xprt->xmit_queue,
+ struct rpc_rqst, rq_xmit);
+ if (!next)
break;
- next = list_first_entry(&xprt->xmit_queue,
- struct rpc_rqst, rq_xmit);
xprt_pin_rqst(next);
spin_unlock(&xprt->queue_lock);
status = xprt_request_transmit(next, task);
@@ -1568,13 +1567,16 @@ xprt_transmit(struct rpc_task *task)
status = 0;
spin_lock(&xprt->queue_lock);
xprt_unpin_rqst(next);
- if (status == 0) {
- if (!xprt_request_data_received(task) ||
- test_bit(RPC_TASK_NEED_XMIT, &task->tk_runstate))
- continue;
- } else if (test_bit(RPC_TASK_NEED_XMIT, &task->tk_runstate))
- task->tk_status = status;
- break;
+ if (status < 0) {
+ if (test_bit(RPC_TASK_NEED_XMIT, &task->tk_runstate))
+ task->tk_status = status;
+ break;
+ }
+ /* Was @task transmitted, and has it received a reply? */
+ if (xprt_request_data_received(task) &&
+ !test_bit(RPC_TASK_NEED_XMIT, &task->tk_runstate))
+ break;
+ cond_resched_lock(&xprt->queue_lock);
}
spin_unlock(&xprt->queue_lock);
}
From: Vasant Hegde <[email protected]>
commit 52862ab33c5d97490f3fa345d6529829e6d6637b upstream.
Commit 587164cd, introduced new opal message type (OPAL_MSG_PRD2) and
added opal notifier. But I missed to unregister the notifier during
module unload path. This results in below call trace if you try to
unload and load opal_prd module.
Also add new notifier_block for OPAL_MSG_PRD2 message.
Sample calltrace (modprobe -r opal_prd; modprobe opal_prd)
BUG: Unable to handle kernel data access on read at 0xc0080000192200e0
Faulting instruction address: 0xc00000000018d1cc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
CPU: 66 PID: 7446 Comm: modprobe Kdump: loaded Tainted: G E 5.14.0prd #759
NIP: c00000000018d1cc LR: c00000000018d2a8 CTR: c0000000000cde10
REGS: c0000003c4c0f0a0 TRAP: 0300 Tainted: G E (5.14.0prd)
MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 24224824 XER: 20040000
CFAR: c00000000018d2a4 DAR: c0080000192200e0 DSISR: 40000000 IRQMASK: 1
...
NIP notifier_chain_register+0x2c/0xc0
LR atomic_notifier_chain_register+0x48/0x80
Call Trace:
0xc000000002090610 (unreliable)
atomic_notifier_chain_register+0x58/0x80
opal_message_notifier_register+0x7c/0x1e0
opal_prd_probe+0x84/0x150 [opal_prd]
platform_probe+0x78/0x130
really_probe+0x110/0x5d0
__driver_probe_device+0x17c/0x230
driver_probe_device+0x60/0x130
__driver_attach+0xfc/0x220
bus_for_each_dev+0xa8/0x130
driver_attach+0x34/0x50
bus_add_driver+0x1b0/0x300
driver_register+0x98/0x1a0
__platform_driver_register+0x38/0x50
opal_prd_driver_init+0x34/0x50 [opal_prd]
do_one_initcall+0x60/0x2d0
do_init_module+0x7c/0x320
load_module+0x3394/0x3650
__do_sys_finit_module+0xd4/0x160
system_call_exception+0x140/0x290
system_call_common+0xf4/0x258
Fixes: 587164cd593c ("powerpc/powernv: Add new opal message type")
Cc: [email protected] # v5.4+
Signed-off-by: Vasant Hegde <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/opal-prd.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/arch/powerpc/platforms/powernv/opal-prd.c
+++ b/arch/powerpc/platforms/powernv/opal-prd.c
@@ -372,6 +372,12 @@ static struct notifier_block opal_prd_ev
.priority = 0,
};
+static struct notifier_block opal_prd_event_nb2 = {
+ .notifier_call = opal_prd_msg_notifier,
+ .next = NULL,
+ .priority = 0,
+};
+
static int opal_prd_probe(struct platform_device *pdev)
{
int rc;
@@ -393,9 +399,10 @@ static int opal_prd_probe(struct platfor
return rc;
}
- rc = opal_message_notifier_register(OPAL_MSG_PRD2, &opal_prd_event_nb);
+ rc = opal_message_notifier_register(OPAL_MSG_PRD2, &opal_prd_event_nb2);
if (rc) {
pr_err("Couldn't register PRD2 event notifier\n");
+ opal_message_notifier_unregister(OPAL_MSG_PRD, &opal_prd_event_nb);
return rc;
}
@@ -404,6 +411,8 @@ static int opal_prd_probe(struct platfor
pr_err("failed to register miscdev\n");
opal_message_notifier_unregister(OPAL_MSG_PRD,
&opal_prd_event_nb);
+ opal_message_notifier_unregister(OPAL_MSG_PRD2,
+ &opal_prd_event_nb2);
return rc;
}
@@ -414,6 +423,7 @@ static int opal_prd_remove(struct platfo
{
misc_deregister(&opal_prd_dev);
opal_message_notifier_unregister(OPAL_MSG_PRD, &opal_prd_event_nb);
+ opal_message_notifier_unregister(OPAL_MSG_PRD2, &opal_prd_event_nb2);
return 0;
}
From: Pali Rohár <[email protected]>
commit a4e17d65dafdd3513042d8f00404c9b6068a825c upstream.
Change PCIe Max Payload Size setting in PCIe Device Control register to 512
bytes to align with PCIe Link Initialization sequence as defined in Marvell
Armada 3700 Functional Specification. According to the specification,
maximal Max Payload Size supported by this device is 512 bytes.
Without this kernel prints suspicious line:
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512)
With this change it changes to:
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -597,8 +597,9 @@ static void advk_pcie_setup_hw(struct ad
reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
reg &= ~PCI_EXP_DEVCTL_READRQ;
- reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
+ reg |= PCI_EXP_DEVCTL_PAYLOAD_512B;
reg |= PCI_EXP_DEVCTL_READRQ_512B;
advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
From: Pali Rohár <[email protected]>
commit 460275f124fb072dca218a6b43b6370eebbab20d upstream.
Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload
Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/pci_regs.h | 6 ++++++
1 file changed, 6 insertions(+)
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -504,6 +504,12 @@
#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */
#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */
+#define PCI_EXP_DEVCTL_PAYLOAD_128B 0x0000 /* 128 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_256B 0x0020 /* 256 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_512B 0x0040 /* 512 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_1024B 0x0060 /* 1024 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_2048B 0x0080 /* 2048 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_4096B 0x00a0 /* 4096 Bytes */
#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */
#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */
#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */
From: Eiichi Tsukata <[email protected]>
[ Upstream commit c7cd82b90599fa10915f41e3dd9098a77d0aa7b6 ]
Currently vosck_connect() increments sock refcount for nonblocking
socket each time it's called, which can lead to memory leak if
it's called multiple times because connect timeout function decrements
sock refcount only once.
Fixes it by making vsock_connect() return -EALREADY immediately when
sock state is already SS_CONNECTING.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Eiichi Tsukata <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/af_vsock.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index 326250513570e..7fe36dbcbe187 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -1279,6 +1279,8 @@ static int vsock_stream_connect(struct socket *sock, struct sockaddr *addr,
* non-blocking call.
*/
err = -EALREADY;
+ if (flags & O_NONBLOCK)
+ goto out;
break;
default:
if ((sk->sk_state == TCP_LISTEN) ||
--
2.33.0
From: Jernej Skrabec <[email protected]>
commit c302c98da646409d657a473da202f10f417f3ff1 upstream.
Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual
recommendation of having arguments enclosed in parenthesis. While that
didn't change anything for quite sometime, it actually become important
after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3:
Remove redundant CSC matrices").
Without this fix, colours are completely off for supported YVU formats
on SoCs with DE2 (A64, H3, R40, etc.).
Fix the issue by enclosing macro arguments in parenthesis.
Cc: [email protected] # 5.12+
Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library")
Reported-by: Roman Stratiienko <[email protected]>
Signed-off-by: Jernej Skrabec <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/sun4i/sun8i_csc.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_csc.h b/drivers/gpu/drm/sun4i/sun8i_csc.h
index a55a38ad849c..022cafa6c06c 100644
--- a/drivers/gpu/drm/sun4i/sun8i_csc.h
+++ b/drivers/gpu/drm/sun4i/sun8i_csc.h
@@ -16,8 +16,8 @@ struct sun8i_mixer;
#define CCSC10_OFFSET 0xA0000
#define CCSC11_OFFSET 0xF0000
-#define SUN8I_CSC_CTRL(base) (base + 0x0)
-#define SUN8I_CSC_COEFF(base, i) (base + 0x10 + 4 * i)
+#define SUN8I_CSC_CTRL(base) ((base) + 0x0)
+#define SUN8I_CSC_COEFF(base, i) ((base) + 0x10 + 4 * (i))
#define SUN8I_CSC_CTRL_EN BIT(0)
--
2.33.1
From: Dave Jones <[email protected]>
commit e629fc1407a63dbb748f828f9814463ffc2a0af0 upstream.
Errata SKX37 is word-for-word identical to the other errata listed in
this workaround. I happened to notice this after investigating a CMCI
storm on a Skylake host. While I can't confirm this was the root cause,
spurious corrected errors does sound like a likely suspect.
Fixes: 2976908e4198 ("x86/mce: Do not log spurious corrected mce errors")
Signed-off-by: Dave Jones <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/mce/intel.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/cpu/mce/intel.c
+++ b/arch/x86/kernel/cpu/mce/intel.c
@@ -526,12 +526,13 @@ bool intel_filter_mce(struct mce *m)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
- /* MCE errata HSD131, HSM142, HSW131, BDM48, and HSM142 */
+ /* MCE errata HSD131, HSM142, HSW131, BDM48, HSM142 and SKX37 */
if ((c->x86 == 6) &&
((c->x86_model == INTEL_FAM6_HASWELL) ||
(c->x86_model == INTEL_FAM6_HASWELL_L) ||
(c->x86_model == INTEL_FAM6_BROADWELL) ||
- (c->x86_model == INTEL_FAM6_HASWELL_G)) &&
+ (c->x86_model == INTEL_FAM6_HASWELL_G) ||
+ (c->x86_model == INTEL_FAM6_SKYLAKE_X)) &&
(m->bank == 0) &&
((m->status & 0xa0000000ffffffff) == 0x80000000000f0005))
return true;
From: Xiaoming Ni <[email protected]>
commit c45361abb9185b1e172bd75eff51ad5f601ccae4 upstream.
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations")
Cc: [email protected] # v4.6+
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/85xx/Makefile | 4 +++-
arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c | 4 ++++
arch/powerpc/platforms/85xx/smp.c | 12 ++++++------
3 files changed, 13 insertions(+), 7 deletions(-)
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,7 +3,9 @@
# Makefile for the PowerPC 85xx linux kernel.
#
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_FSL_PMC) += mpc85xx_pm_ops.o
+ifneq ($(CONFIG_FSL_CORENET_RCPM),y)
+obj-$(CONFIG_SMP) += mpc85xx_pm_ops.o
+endif
obj-y += common.o
--- a/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
@@ -17,6 +17,7 @@
static struct ccsr_guts __iomem *guts;
+#ifdef CONFIG_FSL_PMC
static void mpc85xx_irq_mask(int cpu)
{
@@ -49,6 +50,7 @@ static void mpc85xx_cpu_up_prepare(int c
{
}
+#endif
static void mpc85xx_freeze_time_base(bool freeze)
{
@@ -76,10 +78,12 @@ static const struct of_device_id mpc85xx
static const struct fsl_pm_ops mpc85xx_pm_ops = {
.freeze_time_base = mpc85xx_freeze_time_base,
+#ifdef CONFIG_FSL_PMC
.irq_mask = mpc85xx_irq_mask,
.irq_unmask = mpc85xx_irq_unmask,
.cpu_die = mpc85xx_cpu_die,
.cpu_up_prepare = mpc85xx_cpu_up_prepare,
+#endif
};
int __init mpc85xx_setup_pmc(void)
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -40,7 +40,6 @@ struct epapr_spin_table {
u32 pir;
};
-#ifdef CONFIG_HOTPLUG_CPU
static u64 timebase;
static int tb_req;
static int tb_valid;
@@ -112,6 +111,7 @@ static void mpc85xx_take_timebase(void)
local_irq_restore(flags);
}
+#ifdef CONFIG_HOTPLUG_CPU
static void smp_85xx_cpu_offline_self(void)
{
unsigned int cpu = smp_processor_id();
@@ -495,21 +495,21 @@ void __init mpc85xx_smp_init(void)
smp_85xx_ops.probe = NULL;
}
-#ifdef CONFIG_HOTPLUG_CPU
#ifdef CONFIG_FSL_CORENET_RCPM
+ /* Assign a value to qoriq_pm_ops on PPC_E500MC */
fsl_rcpm_init();
-#endif
-
-#ifdef CONFIG_FSL_PMC
+#else
+ /* Assign a value to qoriq_pm_ops on !PPC_E500MC */
mpc85xx_setup_pmc();
#endif
if (qoriq_pm_ops) {
smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+#ifdef CONFIG_HOTPLUG_CPU
smp_85xx_ops.cpu_offline_self = smp_85xx_cpu_offline_self;
smp_85xx_ops.cpu_die = qoriq_cpu_kill;
- }
#endif
+ }
smp_ops = &smp_85xx_ops;
#ifdef CONFIG_KEXEC_CORE
From: Maciej W. Rozycki <[email protected]>
commit a923a2676e60683aee46aa4b93c30aff240ac20d upstream.
Fix assembly errors like:
{standard input}: Assembler messages:
{standard input}:287: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:680: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:1274: Error: opcode not supported on this processor: mips3 (mips3) `dins $12,$9,32,32'
{standard input}:2175: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
make[1]: *** [scripts/Makefile.build:277: mm/highmem.o] Error 1
with code produced from `__cmpxchg64' for MIPS64r2 CPU configurations
using CONFIG_32BIT and CONFIG_PHYS_ADDR_T_64BIT.
This is due to MIPS_ISA_ARCH_LEVEL downgrading the assembly architecture
to `r4000' i.e. MIPS III for MIPS64r2 configurations, while there is a
block of code containing a DINS MIPS64r2 instruction conditionalized on
MIPS_ISA_REV >= 2 within the scope of the downgrade.
The assembly architecture override code pattern has been put there for
LL/SC instructions, so that code compiles for configurations that select
a processor to build for that does not support these instructions while
still providing run-time support for processors that do, dynamically
switched by non-constant `cpu_has_llsc'. It went in with linux-mips.org
commit aac8aa7717a2 ("Enable a suitable ISA for the assembler around
ll/sc so that code builds even for processors that don't support the
instructions. Plus minor formatting fixes.") back in 2005.
Fix the problem by wrapping these instructions along with the adjacent
SYNC instructions only, following the practice established with commit
cfd54de3b0e4 ("MIPS: Avoid move psuedo-instruction whilst using
MIPS_ISA_LEVEL") and commit 378ed6f0e3c5 ("MIPS: Avoid using .set mips0
to restore ISA"). Strictly speaking the SYNC instructions do not have
to be wrapped as they are only used as a Loongson3 erratum workaround,
so they will be enabled in the assembler by default, but do this so as
to keep code consistent with other places.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: c7e2d71dda7a ("MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()")
Cc: [email protected] # v5.1+
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/cmpxchg.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -249,6 +249,7 @@ static inline unsigned long __cmpxchg64(
/* Load 64 bits from ptr */
" " __SYNC(full, loongson3_war) " \n"
"1: lld %L0, %3 # __cmpxchg64 \n"
+ " .set pop \n"
/*
* Split the 64 bit value we loaded into the 2 registers that hold the
* ret variable.
@@ -276,12 +277,14 @@ static inline unsigned long __cmpxchg64(
" or %L1, %L1, $at \n"
" .set at \n"
# endif
+ " .set push \n"
+ " .set " MIPS_ISA_ARCH_LEVEL " \n"
/* Attempt to store new at ptr */
" scd %L1, %2 \n"
/* If we failed, loop! */
"\t" __SC_BEQZ "%L1, 1b \n"
- " .set pop \n"
"2: " __SYNC(full, loongson3_war) " \n"
+ " .set pop \n"
: "=&r"(ret),
"=&r"(tmp),
"=" GCC_OFF_SMALL_ASM() (*(unsigned long long *)ptr)
From: Michael Pratt <[email protected]>
commit ca7752caeaa70bd31d1714af566c9809688544af upstream.
copy_process currently copies task_struct.posix_cputimers_work as-is. If a
timer interrupt arrives while handling clone and before dup_task_struct
completes then the child task will have:
1. posix_cputimers_work.scheduled = true
2. posix_cputimers_work.work queued.
copy_process clears task_struct.task_works, so (2) will have no effect and
posix_cpu_timers_work will never run (not to mention it doesn't make sense
for two tasks to share a common linked list).
Since posix_cpu_timers_work never runs, posix_cputimers_work.scheduled is
never cleared. Since scheduled is set, future timer interrupts will skip
scheduling work, with the ultimate result that the task will never receive
timer expirations.
Together, the complete flow is:
1. Task 1 calls clone(), enters kernel.
2. Timer interrupt fires, schedules task work on Task 1.
2a. task_struct.posix_cputimers_work.scheduled = true
2b. task_struct.posix_cputimers_work.work added to
task_struct.task_works.
3. dup_task_struct() copies Task 1 to Task 2.
4. copy_process() clears task_struct.task_works for Task 2.
5. Future timer interrupts on Task 2 see
task_struct.posix_cputimers_work.scheduled = true and skip scheduling
work.
Fix this by explicitly clearing contents of task_struct.posix_cputimers_work
in copy_process(). This was never meant to be shared or inherited across
tasks in the first place.
Fixes: 1fb497dd0030 ("posix-cpu-timers: Provide mechanisms to defer timer handling to task_work")
Reported-by: Rhys Hiltner <[email protected]>
Signed-off-by: Michael Pratt <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/posix-timers.h | 2 ++
kernel/fork.c | 1 +
kernel/time/posix-cpu-timers.c | 19 +++++++++++++++++--
3 files changed, 20 insertions(+), 2 deletions(-)
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -177,8 +177,10 @@ static inline void posix_cputimers_group
#endif
#ifdef CONFIG_POSIX_CPU_TIMERS_TASK_WORK
+void clear_posix_cputimers_work(struct task_struct *p);
void posix_cputimers_init_work(void);
#else
+static inline void clear_posix_cputimers_work(struct task_struct *p) { }
static inline void posix_cputimers_init_work(void) { }
#endif
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2191,6 +2191,7 @@ static __latent_entropy struct task_stru
p->pdeath_signal = 0;
INIT_LIST_HEAD(&p->thread_group);
p->task_works = NULL;
+ clear_posix_cputimers_work(p);
/*
* Ensure that the cgroup subsystem policies allow the new process to be
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -1101,13 +1101,28 @@ static void posix_cpu_timers_work(struct
}
/*
+ * Clear existing posix CPU timers task work.
+ */
+void clear_posix_cputimers_work(struct task_struct *p)
+{
+ /*
+ * A copied work entry from the old task is not meaningful, clear it.
+ * N.B. init_task_work will not do this.
+ */
+ memset(&p->posix_cputimers_work.work, 0,
+ sizeof(p->posix_cputimers_work.work));
+ init_task_work(&p->posix_cputimers_work.work,
+ posix_cpu_timers_work);
+ p->posix_cputimers_work.scheduled = false;
+}
+
+/*
* Initialize posix CPU timers task work in init task. Out of line to
* keep the callback static and to avoid header recursion hell.
*/
void __init posix_cputimers_init_work(void)
{
- init_task_work(¤t->posix_cputimers_work.work,
- posix_cpu_timers_work);
+ clear_posix_cputimers_work(current);
}
/*
From: Helge Deller <[email protected]>
commit 279917e27edc293eb645a25428c6ab3f3bca3f86 upstream.
I noticed that sometimes at kernel startup the backtraces did not
included the function names of init functions. Their address were not
resolved to function names and instead only the address was printed.
Debugging shows that the culprit is is_ksym_addr() which is called
by the backtrace functions to check if an address belongs to a function in
the kernel. The problem occurs only for CONFIG_KALLSYMS_ALL=y.
When looking at is_ksym_addr() one can see that for CONFIG_KALLSYMS_ALL=y
the function only tries to resolve the address via is_kernel() function,
which checks like this:
if (addr >= _stext && addr <= _end)
return 1;
On parisc the init functions are located before _stext, so this check fails.
Other platforms seem to have all functions (including init functions)
behind _stext.
The following patch moves the _stext symbol at the beginning of the
kernel and thus includes the init section. This fixes the check and does
not seem to have any negative side effects on where the kernel mapping
happens in the map_pages() function in arch/parisc/mm/init.c.
Signed-off-by: Helge Deller <[email protected]>
Cc: [email protected] # 5.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/kernel/vmlinux.lds.S | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -57,6 +57,8 @@ SECTIONS
{
. = KERNEL_BINARY_TEXT_START;
+ _stext = .; /* start of kernel text, includes init code & data */
+
__init_begin = .;
HEAD_TEXT_SECTION
MLONGCALL_DISCARD(INIT_TEXT_SECTION(8))
@@ -80,7 +82,6 @@ SECTIONS
/* freed after init ends here */
_text = .; /* Text and read-only data */
- _stext = .;
MLONGCALL_KEEP(INIT_TEXT_SECTION(8))
.text ALIGN(PAGE_SIZE) : {
TEXT_TEXT
From: Arnd Bergmann <[email protected]>
commit 418ace9992a7647c446ed3186df40cf165b67298 upstream.
Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like
tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode
As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:
cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU
Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.
The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.
The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.
This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419
Reported-by: Antonio Terceiro <[email protected]>
Reported-by: Naresh Kamboju <[email protected]>
Reported-by: Sebastian Andrzej Siewior <[email protected]>
Tested-by: Sebastian Reichel <[email protected]>
Tested-by: Klaus Kudielka <[email protected]>
Cc: Matthias Klose <[email protected]>
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/Makefile | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -60,15 +60,15 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 -march=armv6
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7
ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 -march=armv6k
endif
-arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 -march=armv5te
arch-$(CONFIG_CPU_32v4T) =-D__LINUX_ARM_ARCH__=4 -march=armv4t
arch-$(CONFIG_CPU_32v4) =-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3m
@@ -82,7 +82,7 @@ tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7t
tune-$(CONFIG_CPU_ARM740T) =-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM9TDMI) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM940T) =-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E) =$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E) =-mtune=arm9e
tune-$(CONFIG_CPU_ARM920T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) =-mtune=arm9tdmi
@@ -90,11 +90,11 @@ tune-$(CONFIG_CPU_ARM926T) =-mtune=arm9t
tune-$(CONFIG_CPU_FA526) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_SA110) =-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON) =$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE) =-mtune=xscale
+tune-$(CONFIG_CPU_XSC3) =-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON) =-mtune=xscale
+tune-$(CONFIG_CPU_V6) =-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K) =-mtune=arm1136j-s
# Evaluate tune cc-option calls now
tune-y := $(tune-y)
From: Michał Mirosław <[email protected]>
commit 0d08e7bf0d0d1a29aff7b16ef516f7415eb1aa05 upstream.
Currently __set_fixmap() bails out with a warning when called in early boot
from early_iounmap(). Fix it, and while at it, make the comment a bit easier
to understand.
Cc: <[email protected]>
Fixes: b089c31c519c ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap")
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Michał Mirosław <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mm/mmu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -391,9 +391,9 @@ void __set_fixmap(enum fixed_addresses i
FIXADDR_END);
BUG_ON(idx >= __end_of_fixed_addresses);
- /* we only support device mappings until pgprot_kernel has been set */
+ /* We support only device mappings before pgprot_kernel is set. */
if (WARN_ON(pgprot_val(prot) != pgprot_val(FIXMAP_PAGE_IO) &&
- pgprot_val(pgprot_kernel) == 0))
+ pgprot_val(prot) && pgprot_val(pgprot_kernel) == 0))
return;
if (pgprot_val(prot))
From: Miquel Raynal <[email protected]>
commit 325fd539fc84f0aaa0ceb9d7d3b8718582473dc5 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 612e048e6aab ("mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/plat_nand.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -21,9 +21,8 @@ struct plat_nand_data {
static int plat_nand_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -94,6 +93,13 @@ static int plat_nand_probe(struct platfo
goto out;
}
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
/* Scan to find existence of the device */
err = nand_scan(&data->chip, pdata->chip.nr_chips);
if (err)
From: Miquel Raynal <[email protected]>
commit 7e3cdba176ba59eaf4d463d273da0718e3626140 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: dbffc8ccdf3a ("mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/au1550nd.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -238,9 +238,8 @@ static int au1550nd_exec_op(struct nand_
static int au1550nd_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -309,6 +308,13 @@ static int au1550nd_probe(struct platfor
if (pd->devwidth)
this->options |= NAND_BUSWIDTH_16;
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
ret = nand_scan(this, 1);
if (ret) {
dev_err(&pdev->dev, "NAND scan failed with %d\n", ret);
From: Miquel Raynal <[email protected]>
commit d707bb74daae07879e0fc1b4b960f8f2d0a5fe5d upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 59d93473323a ("mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/ams-delta.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -217,9 +217,8 @@ static int gpio_nand_setup_interface(str
static int gpio_nand_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -370,6 +369,13 @@ static int gpio_nand_probe(struct platfo
/* Release write protection */
gpiod_set_value(priv->gpiod_nwp, 0);
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
/* Scan to find existence of the device */
err = nand_scan(this, 1);
if (err)
From: Harald Freudenberger <[email protected]>
commit 3826350e6dd435e244eb6e47abad5a47c169ebc2 upstream.
When a queue is switched to soft offline during heavy load and later
switched to soft online again and now used, it may be that the caller
is blocked forever in the ioctl call.
The failure occurs because there is a pending reply after the queue(s)
have been switched to offline. This orphaned reply is received when
the queue is switched to online and is accidentally counted for the
outstanding replies. So when there was a valid outstanding reply and
this orphaned reply is received it counts as the outstanding one thus
dropping the outstanding counter to 0. Voila, with this counter the
receive function is not called any more and the real outstanding reply
is never received (until another request comes in...) and the ioctl
blocks.
The fix is simple. However, instead of readjusting the counter when an
orphaned reply is detected, I check the queue status for not empty and
compare this to the outstanding counter. So if the queue is not empty
then the counter must not drop to 0 but at least have a value of 1.
Signed-off-by: Harald Freudenberger <[email protected]>
Cc: [email protected]
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/crypto/ap_queue.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/s390/crypto/ap_queue.c
+++ b/drivers/s390/crypto/ap_queue.c
@@ -142,6 +142,8 @@ static struct ap_queue_status ap_sm_recv
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
aq->queue_count = max_t(int, 0, aq->queue_count - 1);
+ if (!status.queue_empty && !aq->queue_count)
+ aq->queue_count++;
if (aq->queue_count > 0)
mod_timer(&aq->timeout,
jiffies + aq->request_timeout);
From: Sven Schnelle <[email protected]>
commit 213fca9e23b59581c573d558aa477556f00b8198 upstream.
commit 9c6c273aa424 ("timer: Remove init_timer_on_stack() in favor
of timer_setup_on_stack()") changed the timer setup from
init_timer_on_stack(() to timer_setup(), but missed to change the
mod_timer() call. And while at it, use msecs_to_jiffies() instead
of the open coded timeout calculation.
Cc: [email protected]
Fixes: 9c6c273aa424 ("timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack()")
Signed-off-by: Sven Schnelle <[email protected]>
Reviewed-by: Vasily Gorbik <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/char/tape_std.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/s390/char/tape_std.c
+++ b/drivers/s390/char/tape_std.c
@@ -53,7 +53,6 @@ int
tape_std_assign(struct tape_device *device)
{
int rc;
- struct timer_list timeout;
struct tape_request *request;
request = tape_alloc_request(2, 11);
@@ -70,7 +69,7 @@ tape_std_assign(struct tape_device *devi
* So we set up a timeout for this call.
*/
timer_setup(&request->timer, tape_std_assign_timeout, 0);
- mod_timer(&timeout, jiffies + 2 * HZ);
+ mod_timer(&request->timer, jiffies + msecs_to_jiffies(2000));
rc = tape_do_io_interruptible(device, request);
From: Michal Hocko <[email protected]>
commit 60e2793d440a3ec95abb5d6d4fc034a4b480472d upstream.
Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory. This can happen for 2
different reasons. a) Memcg is out of memory and we rely on
mem_cgroup_oom_synchronize to perform the memcg OOM handling or b)
normal allocation fails.
The latter is quite problematic because allocation paths already trigger
out_of_memory and the page allocator tries really hard to not fail
allocations. Anyway, if the OOM killer has been already invoked there
is no reason to invoke it again from the #PF path. Especially when the
OOM condition might be gone by that time and we have no way to find out
other than allocate.
Moreover if the allocation failed and the OOM killer hasn't been invoked
then we are unlikely to do the right thing from the #PF context because
we have already lost the allocation context and restictions and
therefore might oom kill a task from a different NUMA domain.
This all suggests that there is no legitimate reason to trigger
out_of_memory from pagefault_out_of_memory so drop it. Just to be sure
that no #PF path returns with VM_FAULT_OOM without allocation print a
warning that this is happening before we restart the #PF.
[VvS: #PF allocation can hit into limit of cgroup v1 kmem controller.
This is a local problem related to memcg, however, it causes unnecessary
global OOM kills that are repeated over and over again and escalate into a
real disaster. This has been broken since kmem accounting has been
introduced for cgroup v1 (3.8). There was no kmem specific reclaim for
the separate limit so the only way to handle kmem hard limit was to return
with ENOMEM. In upstream the problem will be fixed by removing the
outdated kmem limit, however stable and LTS kernels cannot do it and are
still affected. This patch fixes the problem and should be backported
into stable/LTS.]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/oom_kill.c | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -1118,19 +1118,15 @@ bool out_of_memory(struct oom_control *o
}
/*
- * The pagefault handler calls here because it is out of memory, so kill a
- * memory-hogging task. If oom_lock is held by somebody else, a parallel oom
- * killing is already in progress so do nothing.
+ * The pagefault handler calls here because some allocation has failed. We have
+ * to take care of the memcg OOM here because this is the only safe context without
+ * any locks held but let the oom killer triggered from the allocation context care
+ * about the global OOM.
*/
void pagefault_out_of_memory(void)
{
- struct oom_control oc = {
- .zonelist = NULL,
- .nodemask = NULL,
- .memcg = NULL,
- .gfp_mask = 0,
- .order = 0,
- };
+ static DEFINE_RATELIMIT_STATE(pfoom_rs, DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
if (mem_cgroup_oom_synchronize(true))
return;
@@ -1138,8 +1134,6 @@ void pagefault_out_of_memory(void)
if (fatal_signal_pending(current))
return;
- if (!mutex_trylock(&oom_lock))
- return;
- out_of_memory(&oc);
- mutex_unlock(&oom_lock);
+ if (__ratelimit(&pfoom_rs))
+ pr_warn("Huh VM_FAULT_OOM leaked out to the #PF handler. Retrying PF\n");
}
From: Vasily Averin <[email protected]>
commit 0b28179a6138a5edd9d82ad2687c05b3773c387b upstream.
Patch series "memcg: prohibit unconditional exceeding the limit of dying tasks", v3.
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It can be misused and allowed to trigger global OOM from inside
a memcg-limited container. On the other hand if memcg fails allocation,
called from inside #PF handler it triggers global OOM from inside
pagefault_out_of_memory().
To prevent these problems this patchset:
(a) removes execution of out_of_memory() from
pagefault_out_of_memory(), becasue nobody can explain why it is
necessary.
(b) allow memcg to fail allocation of dying/killed tasks.
This patch (of 3):
Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory which in turn executes
out_out_memory() and can kill a random task.
An allocation might fail when the current task is the oom victim and
there are no memory reserves left. The OOM killer is already handled at
the page allocator level for the global OOM and at the charging level
for the memcg one. Both have much more information about the scope of
allocation/charge request. This means that either the OOM killer has
been invoked properly and didn't lead to the allocation success or it
has been skipped because it couldn't have been invoked. In both cases
triggering it from here is pointless and even harmful.
It makes much more sense to let the killed task die rather than to wake
up an eternally hungry oom-killer and send him to choose a fatter victim
for breakfast.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vasily Averin <[email protected]>
Suggested-by: Michal Hocko <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/oom_kill.c | 3 +++
1 file changed, 3 insertions(+)
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -1135,6 +1135,9 @@ void pagefault_out_of_memory(void)
if (mem_cgroup_oom_synchronize(true))
return;
+ if (fatal_signal_pending(current))
+ return;
+
if (!mutex_trylock(&oom_lock))
return;
out_of_memory(&oc);
From: "Naveen N. Rao" <[email protected]>
upstream commit b7540d62509453263604a155bf2d5f0ed450cba2
Emit similar instruction sequences to commit a048a07d7f4535
("powerpc/64s: Add support for a store forwarding barrier at kernel
entry/exit") when encountering BPF_NOSPEC.
Mitigations are enabled depending on what the firmware advertises. In
particular, we do not gate these mitigations based on current settings,
just like in x86. Due to this, we don't need to take any action if
mitigations are enabled or disabled at runtime.
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/956570cbc191cd41f8274bed48ee757a86dac62a.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
[adjust macros to account for commits 1c9debbc2eb539 and ef909ba954145e.
adjust security feature checks to account for commit 84ed26fd00c514]
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/net/bpf_jit64.h | 8 ++---
arch/powerpc/net/bpf_jit_comp64.c | 56 +++++++++++++++++++++++++++++++++++---
2 files changed, 56 insertions(+), 8 deletions(-)
--- a/arch/powerpc/net/bpf_jit64.h
+++ b/arch/powerpc/net/bpf_jit64.h
@@ -16,18 +16,18 @@
* with our redzone usage.
*
* [ prev sp ] <-------------
- * [ nv gpr save area ] 6*8 |
+ * [ nv gpr save area ] 5*8 |
* [ tail_call_cnt ] 8 |
- * [ local_tmp_var ] 8 |
+ * [ local_tmp_var ] 16 |
* fp (r31) --> [ ebpf stack space ] upto 512 |
* [ frame header ] 32/112 |
* sp (r1) ---> [ stack pointer ] --------------
*/
/* for gpr non volatile registers BPG_REG_6 to 10 */
-#define BPF_PPC_STACK_SAVE (6*8)
+#define BPF_PPC_STACK_SAVE (5*8)
/* for bpf JIT code internal usage */
-#define BPF_PPC_STACK_LOCALS 16
+#define BPF_PPC_STACK_LOCALS 24
/* stack frame excluding BPF stack, ensure this is quadword aligned */
#define BPF_PPC_STACKFRAME (STACK_FRAME_MIN_SIZE + \
BPF_PPC_STACK_LOCALS + BPF_PPC_STACK_SAVE)
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -15,6 +15,7 @@
#include <linux/if_vlan.h>
#include <asm/kprobes.h>
#include <linux/bpf.h>
+#include <asm/security_features.h>
#include "bpf_jit64.h"
@@ -56,9 +57,9 @@ static inline bool bpf_has_stack_frame(s
* [ prev sp ] <-------------
* [ ... ] |
* sp (r1) ---> [ stack pointer ] --------------
- * [ nv gpr save area ] 6*8
+ * [ nv gpr save area ] 5*8
* [ tail_call_cnt ] 8
- * [ local_tmp_var ] 8
+ * [ local_tmp_var ] 16
* [ unused red zone ] 208 bytes protected
*/
static int bpf_jit_stack_local(struct codegen_context *ctx)
@@ -66,12 +67,12 @@ static int bpf_jit_stack_local(struct co
if (bpf_has_stack_frame(ctx))
return STACK_FRAME_MIN_SIZE + ctx->stack_size;
else
- return -(BPF_PPC_STACK_SAVE + 16);
+ return -(BPF_PPC_STACK_SAVE + 24);
}
static int bpf_jit_stack_tailcallcnt(struct codegen_context *ctx)
{
- return bpf_jit_stack_local(ctx) + 8;
+ return bpf_jit_stack_local(ctx) + 16;
}
static int bpf_jit_stack_offsetof(struct codegen_context *ctx, int reg)
@@ -290,11 +291,34 @@ static int bpf_jit_emit_tail_call(u32 *i
return 0;
}
+/*
+ * We spill into the redzone always, even if the bpf program has its own stackframe.
+ * Offsets hardcoded based on BPF_PPC_STACK_SAVE -- see bpf_jit_stack_local()
+ */
+void bpf_stf_barrier(void);
+
+asm (
+" .global bpf_stf_barrier ;"
+" bpf_stf_barrier: ;"
+" std 21,-64(1) ;"
+" std 22,-56(1) ;"
+" sync ;"
+" ld 21,-64(1) ;"
+" ld 22,-56(1) ;"
+" ori 31,31,0 ;"
+" .rept 14 ;"
+" b 1f ;"
+" 1: ;"
+" .endr ;"
+" blr ;"
+);
+
/* Assemble the body code between the prologue & epilogue */
static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
struct codegen_context *ctx,
u32 *addrs, bool extra_pass)
{
+ enum stf_barrier_type stf_barrier = stf_barrier_type_get();
const struct bpf_insn *insn = fp->insnsi;
int flen = fp->len;
int i, ret;
@@ -665,6 +689,30 @@ emit_clear:
* BPF_ST NOSPEC (speculation barrier)
*/
case BPF_ST | BPF_NOSPEC:
+ if (!security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) ||
+ (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) &&
+ (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) || !cpu_has_feature(CPU_FTR_HVMODE))))
+ break;
+
+ switch (stf_barrier) {
+ case STF_BARRIER_EIEIO:
+ EMIT(0x7c0006ac | 0x02000000);
+ break;
+ case STF_BARRIER_SYNC_ORI:
+ EMIT(PPC_INST_SYNC);
+ EMIT(PPC_RAW_LD(b2p[TMP_REG_1], 13, 0));
+ EMIT(PPC_RAW_ORI(31, 31, 0));
+ break;
+ case STF_BARRIER_FALLBACK:
+ EMIT(PPC_INST_MFLR | ___PPC_RT(b2p[TMP_REG_1]));
+ PPC_LI64(12, dereference_kernel_function_descriptor(bpf_stf_barrier));
+ EMIT(PPC_RAW_MTCTR(12));
+ EMIT(PPC_INST_BCTR | 0x1);
+ EMIT(PPC_RAW_MTLR(b2p[TMP_REG_1]));
+ break;
+ case STF_BARRIER_NONE:
+ break;
+ }
break;
/*
From: "Naveen N. Rao" <[email protected]>
upstream commit 030905920f32e91a52794937f67434ac0b3ea41a
Add a helper to return the stf_barrier type for the current processor.
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/3bd5d7f96ea1547991ac2ce3137dc2b220bae285.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/security_features.h | 5 +++++
arch/powerpc/kernel/security.c | 5 +++++
2 files changed, 10 insertions(+)
--- a/arch/powerpc/include/asm/security_features.h
+++ b/arch/powerpc/include/asm/security_features.h
@@ -39,6 +39,11 @@ static inline bool security_ftr_enabled(
return !!(powerpc_security_features & feature);
}
+#ifdef CONFIG_PPC_BOOK3S_64
+enum stf_barrier_type stf_barrier_type_get(void);
+#else
+static inline enum stf_barrier_type stf_barrier_type_get(void) { return STF_BARRIER_NONE; }
+#endif
// Features indicating support for Spectre/Meltdown mitigations
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -261,6 +261,11 @@ static int __init handle_no_stf_barrier(
early_param("no_stf_barrier", handle_no_stf_barrier);
+enum stf_barrier_type stf_barrier_type_get(void)
+{
+ return stf_enabled_flush_types;
+}
+
/* This is the generic flag used by other architectures */
static int __init handle_ssbd(char *p)
{
From: Vasily Averin <[email protected]>
commit a4ebf1b6ca1e011289677239a2a361fde4a88076 upstream.
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It is assumed that the amount of the memory charged by those
tasks is bound and most of the memory will get released while the task
is exiting. This is resembling a heuristic for the global OOM situation
when tasks get access to memory reserves. There is no global memory
shortage at the memcg level so the memcg heuristic is more relieved.
The above assumption is overly optimistic though. E.g. vmalloc can
scale to really large requests and the heuristic would allow that. We
used to have an early break in the vmalloc allocator for killed tasks
but this has been reverted by commit b8c8a338f75e ("Revert "vmalloc:
back off when the current task is killed""). There are likely other
similar code paths which do not check for fatal signals in an
allocation&charge loop. Also there are some kernel objects charged to a
memcg which are not bound to a process life time.
It has been observed that it is not really hard to trigger these
bypasses and cause global OOM situation.
One potential way to address these runaways would be to limit the amount
of excess (similar to the global OOM with limited oom reserves). This
is certainly possible but it is not really clear how much of an excess
is desirable and still protects from global OOMs as that would have to
consider the overall memcg configuration.
This patch is addressing the problem by removing the heuristic
altogether. Bypass is only allowed for requests which either cannot
fail or where the failure is not desirable while excess should be still
limited (e.g. atomic requests). Implementation wise a killed or dying
task fails to charge if it has passed the OOM killer stage. That should
give all forms of reclaim chance to restore the limit before the failure
(ENOMEM) and tell the caller to back off.
In addition, this patch renames should_force_charge() helper to
task_is_dying() because now its use is not associated witch forced
charging.
This patch depends on pagefault_out_of_memory() to not trigger
out_of_memory(), because then a memcg failure can unwind to VM_FAULT_OOM
and cause a global OOM killer.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vasily Averin <[email protected]>
Suggested-by: Michal Hocko <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memcontrol.c | 27 ++++++++-------------------
1 file changed, 8 insertions(+), 19 deletions(-)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -230,7 +230,7 @@ enum res_type {
iter != NULL; \
iter = mem_cgroup_iter(NULL, iter, NULL))
-static inline bool should_force_charge(void)
+static inline bool task_is_dying(void)
{
return tsk_is_oom_victim(current) || fatal_signal_pending(current) ||
(current->flags & PF_EXITING);
@@ -1729,7 +1729,7 @@ static bool mem_cgroup_out_of_memory(str
* A few threads which were not waiting at mutex_lock_killable() can
* fail to bail out. Therefore, check again after holding oom_lock.
*/
- ret = should_force_charge() || out_of_memory(&oc);
+ ret = task_is_dying() || out_of_memory(&oc);
unlock:
mutex_unlock(&oom_lock);
@@ -2683,6 +2683,7 @@ static int try_charge(struct mem_cgroup
struct page_counter *counter;
enum oom_status oom_status;
unsigned long nr_reclaimed;
+ bool passed_oom = false;
bool may_swap = true;
bool drained = false;
unsigned long pflags;
@@ -2720,15 +2721,6 @@ retry:
goto force;
/*
- * Unlike in global OOM situations, memcg is not in a physical
- * memory shortage. Allow dying and OOM-killed tasks to
- * bypass the last charges so that they can exit quickly and
- * free their memory.
- */
- if (unlikely(should_force_charge()))
- goto force;
-
- /*
* Prevent unbounded recursion when reclaim operations need to
* allocate memory. This might exceed the limits temporarily,
* but we prefer facilitating memory reclaim and getting back
@@ -2788,8 +2780,9 @@ retry:
if (gfp_mask & __GFP_NOFAIL)
goto force;
- if (fatal_signal_pending(current))
- goto force;
+ /* Avoid endless loop for tasks bypassed by the oom killer */
+ if (passed_oom && task_is_dying())
+ goto nomem;
/*
* keep retrying as long as the memcg oom killer is able to make
@@ -2798,14 +2791,10 @@ retry:
*/
oom_status = mem_cgroup_oom(mem_over_limit, gfp_mask,
get_order(nr_pages * PAGE_SIZE));
- switch (oom_status) {
- case OOM_SUCCESS:
+ if (oom_status == OOM_SUCCESS) {
+ passed_oom = true;
nr_retries = MAX_RECLAIM_RETRIES;
goto retry;
- case OOM_FAILED:
- goto force;
- default:
- goto nomem;
}
nomem:
if (!(gfp_mask & __GFP_NOFAIL))
From: Dominique Martinet <[email protected]>
commit 27eb4c3144f7a5ebef3c9a261d80cb3e1fa784dc upstream.
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: [email protected]
Cc: [email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/client.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -538,6 +538,8 @@ static int p9_check_errors(struct p9_cli
kfree(ename);
} else {
err = p9pdu_readf(&req->rc, c->proto_version, "d", &ecode);
+ if (err)
+ goto out_err;
err = -ecode;
p9_debug(P9_DEBUG_9P, "<<< RLERROR (%d)\n", -ecode);
From: Guo Ren <[email protected]>
commit 69ea463021be0d159ab30f96195fb0dd18ee2272 upstream.
When using "devm_request_threaded_irq(,,,,IRQF_ONESHOT,,)" in a driver,
only the first interrupt is handled, and following interrupts are never
delivered (initially reported in [1]).
That's because the RISC-V PLIC cannot EOI masked interrupts, as explained
in the description of Interrupt Completion in the PLIC spec [2]:
<quote>
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored.
</quote>
Re-enable the interrupt before completion if it has been masked during
the handling, and remask it afterwards.
[1] http://lists.infradead.org/pipermail/linux-riscv/2021-July/007441.html
[2] https://github.com/riscv/riscv-plic-spec/blob/8bc15a35d07c9edf7b5d23fec9728302595ffc4d/riscv-plic.adoc
Fixes: bb0fed1c60cc ("irqchip/sifive-plic: Switch to fasteoi flow")
Reported-by: Vincent Pelletier <[email protected]>
Tested-by: Nikita Shubin <[email protected]>
Signed-off-by: Guo Ren <[email protected]>
Cc: [email protected]
Cc: Thomas Gleixner <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
[maz: amended commit message]
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/irqchip/irq-sifive-plic.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -163,7 +163,13 @@ static void plic_irq_eoi(struct irq_data
{
struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
- writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+ if (irqd_irq_masked(d)) {
+ plic_irq_unmask(d);
+ writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+ plic_irq_mask(d);
+ } else {
+ writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+ }
}
static struct irq_chip plic_chip = {
From: Quinn Tran <[email protected]>
[ Upstream commit c98c5daaa24b583cba1369b7d167f93c6ae7299c ]
Current code does list element deletion and addition in and out of lock
protection. This patch moves deletion behind lock.
list_add double add: new=ffff9130b5eb89f8, prev=ffff9130b5eb89f8,
next=ffff9130c6a715f0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 182395 Comm: kworker/1:37 Kdump: loaded Tainted: G W OE
--------- - - 4.18.0-193.el8.x86_64 #1
Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014
Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx]
RIP: 0010:__list_add_valid+0x41/0x50
Code: 85 94 00 00 00 48 39 c7 74 0b 48 39 d7 74 06 b8 01 00 00 00 c3 48 89 f2
4c 89 c1 48 89 fe 48 c7 c7 60 83 ad 97 e8 4d bd ce ff <0f> 0b 0f 1f 00 66 2e
0f 1f 84 00 00 00 00 00 48 8b 07 48 8b 57 08
RSP: 0018:ffffaba306f47d68 EFLAGS: 00010046
RAX: 0000000000000058 RBX: ffff9130b5eb8800 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9130b7456a00
RBP: ffff9130c6a70a58 R08: 000000000008d7be R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9130c6a715f0
R13: ffff9130b5eb8824 R14: ffff9130b5eb89f8 R15: ffff9130b5eb89f8
FS: 0000000000000000(0000) GS:ffff9130b7440000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007efcaaef11a0 CR3: 000000005200a002 CR4: 00000000000606e0
Call Trace:
qla24xx_async_gnl+0x113/0x3c0 [qla2xxx]
? qla2x00_iocb_work_fn+0x53/0x80 [qla2xxx]
? process_one_work+0x1a7/0x3b0
? worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
? kthread+0x112/0x130
Link: https://lore.kernel.org/r/[email protected]
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 5bbdaefb44efc..fdae25ec554d9 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -976,8 +976,6 @@ static void qla24xx_async_gnl_sp_done(srb_t *sp, int res)
sp->name, res, sp->u.iocb_cmd.u.mbx.in_mb[1],
sp->u.iocb_cmd.u.mbx.in_mb[2]);
- if (res == QLA_FUNCTION_TIMEOUT)
- return;
sp->fcport->flags &= ~(FCF_ASYNC_SENT|FCF_ASYNC_ACTIVE);
memset(&ea, 0, sizeof(ea));
@@ -1015,8 +1013,8 @@ static void qla24xx_async_gnl_sp_done(srb_t *sp, int res)
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
list_for_each_entry_safe(fcport, tf, &h, gnl_entry) {
- list_del_init(&fcport->gnl_entry);
spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
+ list_del_init(&fcport->gnl_entry);
fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE);
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
ea.fcport = fcport;
--
2.33.0
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 778a0cbef5fb76bf506f84938517bb77e7a1c478 ]
The setting from the cirrus,ts-inv property should be applied to the
TIP_SENSE_INV bit, as this is the one that actually affects the jack
detect block. The TS_INV bit only swaps the meaning of the PLUG and
UNPLUG interrupts and should always be 1 for the interrupts to have
the normal meaning.
Due to some misunderstanding the driver had been implemented to
configure the TS_INV bit based on the jack switch polarity. This made
the interrupts behave the correct way around, but left the jack detect
block, button detect and analogue circuits always interpreting an open
switch as unplugged.
The signal chain inside the codec is:
SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts
|
v
Jack detect,
button detect and
analog control
As the TIP_SENSE_INV already performs the necessary inversion the
TS_INV bit never needs to change. It must always be 1 to yield the
expected interrupt behaviour.
Some extra confusion has arisen because of the additional invert in the
interrupt path, meaning that a value applied to the TS_INV bit produces
the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv
property has therefore always had the opposite effect to what might be
expected (0 = inverted, 1 = not inverted). To maintain the meaning of
the ts-inv property it must be inverted when applied to TIP_SENSE_INV.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index e56d3c9c39756..54c1ede59b8b7 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1529,12 +1529,15 @@ static void cs42l42_setup_hs_type_detect(struct cs42l42_private *cs42l42)
(1 << CS42L42_HS_CLAMP_DISABLE_SHIFT));
/* Enable the tip sense circuit */
+ regmap_update_bits(cs42l42->regmap, CS42L42_TSENSE_CTL,
+ CS42L42_TS_INV_MASK, CS42L42_TS_INV_MASK);
+
regmap_update_bits(cs42l42->regmap, CS42L42_TIPSENSE_CTL,
CS42L42_TIP_SENSE_CTRL_MASK |
CS42L42_TIP_SENSE_INV_MASK |
CS42L42_TIP_SENSE_DEBOUNCE_MASK,
(3 << CS42L42_TIP_SENSE_CTRL_SHIFT) |
- (0 << CS42L42_TIP_SENSE_INV_SHIFT) |
+ (!cs42l42->ts_inv << CS42L42_TIP_SENSE_INV_SHIFT) |
(2 << CS42L42_TIP_SENSE_DEBOUNCE_SHIFT));
/* Save the initial status of the tip sense */
@@ -1578,10 +1581,6 @@ static int cs42l42_handle_device_data(struct device *dev,
cs42l42->ts_inv = CS42L42_TS_INV_DIS;
}
- regmap_update_bits(cs42l42->regmap, CS42L42_TSENSE_CTL,
- CS42L42_TS_INV_MASK,
- (cs42l42->ts_inv << CS42L42_TS_INV_SHIFT));
-
ret = device_property_read_u32(dev, "cirrus,ts-dbnc-rise", &val);
if (!ret) {
switch (val) {
--
2.33.0
From: Saurav Kashyap <[email protected]>
[ Upstream commit 44c57f205876518b14ab2b4b5d88a181f41260bb ]
Add changes to support FCP2 Target.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_dbg.c | 3 +--
drivers/scsi/qla2xxx/qla_init.c | 6 ++++++
drivers/scsi/qla2xxx/qla_os.c | 10 ++++++++++
3 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 144a893e7335b..3a20bf8ce5ab9 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -12,8 +12,7 @@
* ----------------------------------------------------------------------
* | Module Init and Probe | 0x0199 | |
* | Mailbox commands | 0x1206 | 0x11a5-0x11ff |
- * | Device Discovery | 0x2134 | 0x210e-0x2116 |
- * | | | 0x211a |
+ * | Device Discovery | 0x2134 | 0x210e-0x2115 |
* | | | 0x211c-0x2128 |
* | | | 0x212c-0x2134 |
* | Queue Command and IO tracing | 0x3074 | 0x300b |
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b7aac3116f2db..e893b42e51a35 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1710,6 +1710,12 @@ void qla2x00_handle_rscn(scsi_qla_host_t *vha, struct event_arg *ea)
fcport = qla2x00_find_fcport_by_nportid(vha, &ea->id, 1);
if (fcport) {
+ if (fcport->flags & FCF_FCP2_DEVICE) {
+ ql_dbg(ql_dbg_disc, vha, 0x2115,
+ "Delaying session delete for FCP2 portid=%06x %8phC ",
+ fcport->d_id.b24, fcport->port_name);
+ return;
+ }
fcport->scan_needed = 1;
fcport->rscn_gen++;
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 813abaf1b0872..30ce84468c759 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3955,6 +3955,16 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha)
"Mark all dev lost\n");
list_for_each_entry(fcport, &vha->vp_fcports, list) {
+ if (fcport->loop_id != FC_NO_LOOP_ID &&
+ (fcport->flags & FCF_FCP2_DEVICE) &&
+ fcport->port_type == FCT_TARGET &&
+ !qla2x00_reset_active(vha)) {
+ ql_dbg(ql_dbg_disc, vha, 0x211a,
+ "Delaying session delete for FCP2 flags 0x%x port_type = 0x%x port_id=%06x %phC",
+ fcport->flags, fcport->port_type,
+ fcport->d_id.b24, fcport->port_name);
+ continue;
+ }
fcport->scan_state = 0;
qlt_schedule_sess_for_deletion(fcport);
}
--
2.33.0
From: Ahmad Fatoum <[email protected]>
[ Upstream commit 164483c735190775f29d0dcbac0363adc51a068d ]
The fintek watchdog timer can configure timeouts of second granularity
only up to 255 seconds. Beyond that, the timeout needs to be configured
with minute granularity. WDIOC_GETTIMEOUT should report the actual
timeout configured, not just echo back the timeout configured by the
user. Do so.
Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG")
Suggested-by: Guenter Roeck <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Ahmad Fatoum <[email protected]>
Link: https://lore.kernel.org/r/5e17960fe8cc0e3cb2ba53de4730b75d9a0f33d5.1628525954.git-series.a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/f71808e_wdt.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index f60beec1bbaea..f7d82d2619133 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -228,15 +228,17 @@ static int watchdog_set_timeout(int timeout)
mutex_lock(&watchdog.lock);
- watchdog.timeout = timeout;
if (timeout > 0xff) {
watchdog.timer_val = DIV_ROUND_UP(timeout, 60);
watchdog.minutes_mode = true;
+ timeout = watchdog.timer_val * 60;
} else {
watchdog.timer_val = timeout;
watchdog.minutes_mode = false;
}
+ watchdog.timeout = timeout;
+
mutex_unlock(&watchdog.lock);
return 0;
--
2.33.0
From: J. Bruce Fields <[email protected]>
[ Upstream commit 9b6e27d01adcec58e046c624874f8a124e8b07ec ]
Dan Carpenter says:
The patch d20c11d86d8f: "nfsd: Protect session creation and client
confirm using client_lock" from Jul 30, 2014, leads to the following
Smatch static checker warning:
net/sunrpc/addr.c:178 rpc_parse_scope_id()
warn: sleeping in atomic context
Reported-by: Dan Carpenter <[email protected]>
Fixes: d20c11d86d8f ("nfsd: Protect session creation and client...")
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/addr.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c
index 6e4dbd577a39f..d435bffc61999 100644
--- a/net/sunrpc/addr.c
+++ b/net/sunrpc/addr.c
@@ -162,8 +162,10 @@ static int rpc_parse_scope_id(struct net *net, const char *buf,
const size_t buflen, const char *delim,
struct sockaddr_in6 *sin6)
{
- char *p;
+ char p[IPV6_SCOPE_ID_LEN + 1];
size_t len;
+ u32 scope_id = 0;
+ struct net_device *dev;
if ((buf + buflen) == delim)
return 1;
@@ -175,29 +177,23 @@ static int rpc_parse_scope_id(struct net *net, const char *buf,
return 0;
len = (buf + buflen) - delim - 1;
- p = kmemdup_nul(delim + 1, len, GFP_KERNEL);
- if (p) {
- u32 scope_id = 0;
- struct net_device *dev;
-
- dev = dev_get_by_name(net, p);
- if (dev != NULL) {
- scope_id = dev->ifindex;
- dev_put(dev);
- } else {
- if (kstrtou32(p, 10, &scope_id) != 0) {
- kfree(p);
- return 0;
- }
- }
-
- kfree(p);
-
- sin6->sin6_scope_id = scope_id;
- return 1;
+ if (len > IPV6_SCOPE_ID_LEN)
+ return 0;
+
+ memcpy(p, delim + 1, len);
+ p[len] = 0;
+
+ dev = dev_get_by_name(net, p);
+ if (dev != NULL) {
+ scope_id = dev->ifindex;
+ dev_put(dev);
+ } else {
+ if (kstrtou32(p, 10, &scope_id) != 0)
+ return 0;
}
- return 0;
+ sin6->sin6_scope_id = scope_id;
+ return 1;
}
static size_t rpc_pton6(struct net *net, const char *buf, const size_t buflen,
--
2.33.0
From: Tom Rix <[email protected]>
[ Upstream commit d108370c644b153382632b3e5511ade575c91c86 ]
clang static analysis reports this representative problem:
label.c:1463:16: warning: Assigned value is garbage or undefined
label->hname = name;
^ ~~~~
In aa_update_label_name(), this the problem block of code
if (aa_label_acntsxprint(&name, ...) == -1)
return res;
On failure, aa_label_acntsxprint() has a more complicated return
that just -1. So check for a negative return.
It was also noted that the aa_label_acntsxprint() main comment refers
to a nonexistent parameter, so clean up the comment.
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Tom Rix <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: John Johansen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/apparmor/label.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/apparmor/label.c b/security/apparmor/label.c
index e68bcedca976b..6222fdfebe4e5 100644
--- a/security/apparmor/label.c
+++ b/security/apparmor/label.c
@@ -1454,7 +1454,7 @@ bool aa_update_label_name(struct aa_ns *ns, struct aa_label *label, gfp_t gfp)
if (label->hname || labels_ns(label) != ns)
return res;
- if (aa_label_acntsxprint(&name, ns, label, FLAGS_NONE, gfp) == -1)
+ if (aa_label_acntsxprint(&name, ns, label, FLAGS_NONE, gfp) < 0)
return res;
ls = labels_set(label);
@@ -1704,7 +1704,7 @@ int aa_label_asxprint(char **strp, struct aa_ns *ns, struct aa_label *label,
/**
* aa_label_acntsxprint - allocate a __counted string buffer and print label
- * @strp: buffer to write to. (MAY BE NULL if @size == 0)
+ * @strp: buffer to write to.
* @ns: namespace profile is being viewed from
* @label: label to view (NOT NULL)
* @flags: flags controlling what label info is printed
--
2.33.0
From: Kewei Xu <[email protected]>
[ Upstream commit b8228aea5a19d5111a7bf44f7de6749d1f5d487a ]
The reason for the modification here is that the previous
offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
the correct value.
Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
Signed-off-by: Kewei Xu <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Qii Wang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 0af2784cbd0d9..265635db29aa5 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -195,7 +195,7 @@ static const u16 mt_i2c_regs_v2[] = {
[OFFSET_CLOCK_DIV] = 0x48,
[OFFSET_SOFTRESET] = 0x50,
[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
- [OFFSET_DEBUGSTAT] = 0xe0,
+ [OFFSET_DEBUGSTAT] = 0xe4,
[OFFSET_DEBUGCTRL] = 0xe8,
[OFFSET_FIFO_STAT] = 0xf4,
[OFFSET_FIFO_THRESH] = 0xf8,
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit cdf10ffe8f626d8a2edc354abf063df0078b2d71 ]
When registering the IRQ handler fails, do not just return the error code,
this will free the devm_kzalloc()-ed data struct while leaving the queued
work queued and the registered power_supply registered with both of them
now pointing to free-ed memory, resulting in various kernel crashes
soon afterwards.
Instead properly tear-down things on IRQ handler register errors.
Fixes: 703df6c09795 ("power: bq27xxx_battery: Reorganize I2C into a module")
Cc: Andrew F. Davis <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/bq27xxx_battery_i2c.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index eb4f4284982fa..3012eb13a08cb 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -187,7 +187,8 @@ static int bq27xxx_battery_i2c_probe(struct i2c_client *client,
dev_err(&client->dev,
"Unable to register IRQ %d error %d\n",
client->irq, ret);
- return ret;
+ bq27xxx_battery_teardown(di);
+ goto err_failed;
}
}
--
2.33.0
From: Florian Westphal <[email protected]>
[ Upstream commit 5648b5e1169ff1d6d6a46c35c0b5fbebd2a5cbb2 ]
On 64bit platforms the MAC header is set to 0xffff on allocation and
also when a helper like skb_unset_mac_header() is called.
dev_parse_header may call skb_mac_header() which assumes valid mac offset:
BUG: KASAN: use-after-free in eth_header_parse+0x75/0x90
Read of size 6 at addr ffff8881075a5c05 by task nf-queue/1364
Call Trace:
memcpy+0x20/0x60
eth_header_parse+0x75/0x90
__nfqnl_enqueue_packet+0x1a61/0x3380
__nf_queue+0x597/0x1300
nf_queue+0xf/0x40
nf_hook_slow+0xed/0x190
nf_hook+0x184/0x440
ip_output+0x1c0/0x2a0
nf_reinject+0x26f/0x700
nfqnl_recv_verdict+0xa16/0x18b0
nfnetlink_rcv_msg+0x506/0xe70
The existing code only works if the skb has a mac header.
Fixes: 2c38de4c1f8da7 ("netfilter: fix looped (broad|multi)cast's MAC handling")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nfnetlink_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index d1d8bca03b4f0..98994fe677fe9 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -562,7 +562,7 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
goto nla_put_failure;
if (indev && entskb->dev &&
- entskb->mac_header != entskb->network_header) {
+ skb_mac_header_was_set(entskb)) {
struct nfqnl_msg_packet_hw phw;
int len;
--
2.33.0
From: Eric W. Biederman <[email protected]>
[ Upstream commit ce0ee4e6ac99606f3945f4d47775544edc3f7985 ]
Today the sh code allocates memory the first time a process uses
the fpu. If that memory allocation fails, kill the affected task
with force_sig(SIGKILL) rather than do_group_exit(SIGKILL).
Calling do_group_exit from an exception handler can potentially lead
to dead locks as do_group_exit is not designed to be called from
interrupt context. Instead use force_sig(SIGKILL) to kill the
userspace process. Sending signals in general and force_sig in
particular has been tested from interrupt context so there should be
no problems.
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: [email protected]
Fixes: 0ea820cf9bf5 ("sh: Move over to dynamically allocated FPU context.")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/kernel/cpu/fpu.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/sh/kernel/cpu/fpu.c b/arch/sh/kernel/cpu/fpu.c
index ae354a2931e7e..fd6db0ab19288 100644
--- a/arch/sh/kernel/cpu/fpu.c
+++ b/arch/sh/kernel/cpu/fpu.c
@@ -62,18 +62,20 @@ void fpu_state_restore(struct pt_regs *regs)
}
if (!tsk_used_math(tsk)) {
- local_irq_enable();
+ int ret;
/*
* does a slab alloc which can sleep
*/
- if (init_fpu(tsk)) {
+ local_irq_enable();
+ ret = init_fpu(tsk);
+ local_irq_disable();
+ if (ret) {
/*
* ran out of memory!
*/
- do_group_exit(SIGKILL);
+ force_sig(SIGKILL);
return;
}
- local_irq_disable();
}
grab_fpu(regs);
--
2.33.0
From: Sylwester Dziedziuch <[email protected]>
[ Upstream commit ce572a5b88d5ca6737b5e23da9892792fd708ad3 ]
VF was not able to change its hardware MAC address in case
the new address was already present in the MAC filter list.
Change the handling of VF add mac request to not return
if requested MAC address is already present on the list
and check if its hardware MAC needs to be updated in this case.
Fixes: ed4c068d46f6 ("ice: Enable ip link show on the PF to display VF unicast MAC(s)")
Signed-off-by: Sylwester Dziedziuch <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index c9f82fd3cf48d..22e23199c92c1 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -3068,6 +3068,7 @@ ice_vc_add_mac_addr(struct ice_vf *vf, struct ice_vsi *vsi, u8 *mac_addr)
{
struct device *dev = ice_pf_to_dev(vf->pf);
enum ice_status status;
+ int ret = 0;
/* default unicast MAC already added */
if (ether_addr_equal(mac_addr, vf->dflt_lan_addr.addr))
@@ -3080,13 +3081,18 @@ ice_vc_add_mac_addr(struct ice_vf *vf, struct ice_vsi *vsi, u8 *mac_addr)
status = ice_fltr_add_mac(vsi, mac_addr, ICE_FWD_TO_VSI);
if (status == ICE_ERR_ALREADY_EXISTS) {
- dev_err(dev, "MAC %pM already exists for VF %d\n", mac_addr,
+ dev_dbg(dev, "MAC %pM already exists for VF %d\n", mac_addr,
vf->vf_id);
- return -EEXIST;
+ /* don't return since we might need to update
+ * the primary MAC in ice_vfhw_mac_add() below
+ */
+ ret = -EEXIST;
} else if (status) {
dev_err(dev, "Failed to add MAC %pM for VF %d\n, error %s\n",
mac_addr, vf->vf_id, ice_stat_str(status));
return -EIO;
+ } else {
+ vf->num_mac++;
}
/* Set the default LAN address to the latest unicast MAC address added
@@ -3096,9 +3102,7 @@ ice_vc_add_mac_addr(struct ice_vf *vf, struct ice_vsi *vsi, u8 *mac_addr)
if (is_unicast_ether_addr(mac_addr))
ether_addr_copy(vf->dflt_lan_addr.addr, mac_addr);
- vf->num_mac++;
-
- return 0;
+ return ret;
}
/**
--
2.33.0
From: Baptiste Lepers <[email protected]>
[ Upstream commit a2915fa06227b056a8f9b0d79b61dca08ad5cfc6 ]
_nfs4_pnfs_v3/v4_ds_connect do
some work
smp_wmb
ds->ds_clp = clp;
And nfs4_ff_layout_prepare_ds currently does
smp_rmb
if(ds->ds_clp)
...
This patch places the smp_rmb after the if. This ensures that following
reads only happen once nfs4_ff_layout_prepare_ds has checked that data
has been properly initialized.
Fixes: d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Baptiste Lepers <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/flexfilelayout/flexfilelayoutdev.c | 4 ++--
fs/nfs/pnfs_nfs.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/flexfilelayout/flexfilelayoutdev.c b/fs/nfs/flexfilelayout/flexfilelayoutdev.c
index 3eda40a320a53..1f12297109b41 100644
--- a/fs/nfs/flexfilelayout/flexfilelayoutdev.c
+++ b/fs/nfs/flexfilelayout/flexfilelayoutdev.c
@@ -378,10 +378,10 @@ nfs4_ff_layout_prepare_ds(struct pnfs_layout_segment *lseg,
goto noconnect;
ds = mirror->mirror_ds->ds;
+ if (READ_ONCE(ds->ds_clp))
+ goto out;
/* matching smp_wmb() in _nfs4_pnfs_v3/4_ds_connect */
smp_rmb();
- if (ds->ds_clp)
- goto out;
/* FIXME: For now we assume the server sent only one version of NFS
* to use for the DS.
diff --git a/fs/nfs/pnfs_nfs.c b/fs/nfs/pnfs_nfs.c
index 251c4a3aef9a6..37b52b53a7e53 100644
--- a/fs/nfs/pnfs_nfs.c
+++ b/fs/nfs/pnfs_nfs.c
@@ -876,7 +876,7 @@ static int _nfs4_pnfs_v3_ds_connect(struct nfs_server *mds_srv,
}
smp_wmb();
- ds->ds_clp = clp;
+ WRITE_ONCE(ds->ds_clp, clp);
dprintk("%s [new] addr: %s\n", __func__, ds->ds_remotestr);
out:
return status;
@@ -949,7 +949,7 @@ static int _nfs4_pnfs_v4_ds_connect(struct nfs_server *mds_srv,
}
smp_wmb();
- ds->ds_clp = clp;
+ WRITE_ONCE(ds->ds_clp, clp);
dprintk("%s [new] addr: %s\n", __func__, ds->ds_remotestr);
out:
return status;
--
2.33.0
From: Trond Myklebust <[email protected]>
[ Upstream commit cec08f452a687fce9dfdf47946d00a1d12a8bec5 ]
If the directory changed while we were revalidating the dentry, then
don't update the dentry verifier. There is no value in setting the
verifier to an older value, and we could end up overwriting a more up to
date verifier from a parallel revalidation.
Fixes: efeda80da38d ("NFSv4: Fix revalidation of dentries with delegations")
Signed-off-by: Trond Myklebust <[email protected]>
Tested-by: Benjamin Coddington <[email protected]>
Reviewed-by: Benjamin Coddington <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/dir.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index c837675cd395a..8b963c72dd3b1 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1061,13 +1061,12 @@ static bool nfs_verifier_is_delegated(struct dentry *dentry)
static void nfs_set_verifier_locked(struct dentry *dentry, unsigned long verf)
{
struct inode *inode = d_inode(dentry);
+ struct inode *dir = d_inode(dentry->d_parent);
- if (!nfs_verifier_is_delegated(dentry) &&
- !nfs_verify_change_attribute(d_inode(dentry->d_parent), verf))
- goto out;
+ if (!nfs_verify_change_attribute(dir, verf))
+ return;
if (inode && NFS_PROTO(inode)->have_delegation(inode, FMODE_READ))
nfs_set_verifier_delegated(&verf);
-out:
dentry->d_time = verf;
}
--
2.33.0
From: Arnaud Pouliquen <[email protected]>
[ Upstream commit 537d3af1bee8ad1415fda9b622d1ea6d1ae76dfa ]
According to the description of the rpmsg_create_ept in rpmsg_core.c
the function should return NULL on error.
Fixes: 2c8a57088045 ("rpmsg: Provide function stubs for API")
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/rpmsg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
index 9fe156d1c018e..a68972b097b72 100644
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -177,7 +177,7 @@ static inline struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_device *rpdev
/* This shouldn't be possible */
WARN_ON(1);
- return ERR_PTR(-ENXIO);
+ return NULL;
}
static inline int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len)
--
2.33.0
From: Jackie Liu <[email protected]>
[ Upstream commit 28b7ee33a2122569ac065cad578bf23f50cc65c3 ]
TI AR7 Watchdog Timer is only build for 32bit.
Avoid error like:
In file included from drivers/watchdog/ar7_wdt.c:29:
./arch/mips/include/asm/mach-ar7/ar7.h: In function ‘ar7_is_titan’:
./arch/mips/include/asm/mach-ar7/ar7.h:111:24: error: implicit declaration of function ‘KSEG1ADDR’; did you mean ‘CKSEG1ADDR’? [-Werror=implicit-function-declaration]
111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) ==
| ^~~~~~~~~
| CKSEG1ADDR
Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index db935d6b10c27..01ce3f41cc219 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1723,7 +1723,7 @@ config SIBYTE_WDOG
config AR7_WDT
tristate "TI AR7 Watchdog Timer"
- depends on AR7 || (MIPS && COMPILE_TEST)
+ depends on AR7 || (MIPS && 32BIT && COMPILE_TEST)
help
Hardware driver for the TI AR7 Watchdog Timer.
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit 1aaa557b2db95c9506ed0981bc34505c32d6b62b ]
'make randconfig' can produce a .config file with
"CONFIG_MEMORY_RESERVE=" (no value) since it has no default.
When a subsequent 'make all' is done, kconfig restarts the config
and prompts for a value for MEMORY_RESERVE. This breaks
scripting/automation where there is no interactive user input.
Add a default value for MEMORY_RESERVE. (Any integer value will
work here for kconfig.)
Fixes a kconfig warning:
.config:214:warning: symbol value '' invalid for MEMORY_RESERVE
* Restart config...
Memory reservation (MiB) (MEMORY_RESERVE) [] (NEW)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") # from beginning of git history
Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/Kconfig.machine | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index e161a4e1493b4..51a878803fb6d 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -191,6 +191,7 @@ config INIT_LCD
config MEMORY_RESERVE
int "Memory reservation (MiB)"
depends on (UCSIMM || UCDIMM)
+ default 0
help
Reserve certain memory regions on 68x328 based boards.
--
2.33.0
From: Robert-Ionut Alexa <[email protected]>
[ Upstream commit 8120bd469f5525da229953c1197f2b826c0109f4 ]
Free the kbuf buffer before returning from the dpaa2_console_read()
function. The variable no longer goes out of scope, leaking the storage
it points to.
Fixes: c93349d8c170 ("soc: fsl: add DPAA2 console support")
Signed-off-by: Robert-Ionut Alexa <[email protected]>
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/fsl/dpaa2-console.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/fsl/dpaa2-console.c b/drivers/soc/fsl/dpaa2-console.c
index 27243f706f376..53917410f2bdb 100644
--- a/drivers/soc/fsl/dpaa2-console.c
+++ b/drivers/soc/fsl/dpaa2-console.c
@@ -231,6 +231,7 @@ static ssize_t dpaa2_console_read(struct file *fp, char __user *buf,
cd->cur_ptr += bytes;
written += bytes;
+ kfree(kbuf);
return written;
err_free_buf:
--
2.33.0
From: Lars-Peter Clausen <[email protected]>
[ Upstream commit e7e1e880b114ca640a2f280b0d5d38aed98f98c6 ]
Before the `callback_result` callback was introduced drivers coded their
invocation to the callback in a similar way to:
if (cb->callback) {
spin_unlock(&dma->lock);
cb->callback(cb->callback_param);
spin_lock(&dma->lock);
}
With the introduction of `callback_result` two helpers where introduced to
transparently handle both types of callbacks. And drivers where updated to
look like this:
if (dmaengine_desc_callback_valid(cb)) {
spin_unlock(&dma->lock);
dmaengine_desc_callback_invoke(cb, ...);
spin_lock(&dma->lock);
}
dmaengine_desc_callback_invoke() correctly handles both `callback_result`
and `callback`. But we forgot to update the dmaengine_desc_callback_valid()
function to check for `callback_result`. As a result DMA descriptors that
use the `callback_result` rather than `callback` don't have their callback
invoked by drivers that follow the pattern above.
Fix this by checking for both `callback` and `callback_result` in
dmaengine_desc_callback_valid().
Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation")
Signed-off-by: Lars-Peter Clausen <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/dmaengine.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/dmaengine.h b/drivers/dma/dmaengine.h
index 1bfbd64b13717..53f16d3f00294 100644
--- a/drivers/dma/dmaengine.h
+++ b/drivers/dma/dmaengine.h
@@ -176,7 +176,7 @@ dmaengine_desc_get_callback_invoke(struct dma_async_tx_descriptor *tx,
static inline bool
dmaengine_desc_callback_valid(struct dmaengine_desc_callback *cb)
{
- return (cb->callback) ? true : false;
+ return cb->callback || cb->callback_result;
}
struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 80f9eb70fd9276938f0a131f76d438021bfd8b34 ]
Currently /sys/class/graphics/fb0/bl_curve is not accessible (-ENODEV),
as the driver does not connect the backlight to the frame buffer device.
Fix this moving backlight initialization up, and filling in
fb_info.bl_dev.
Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Robin van der Gracht <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/auxdisplay/ht16k33.c | 56 ++++++++++++++++++------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
index d8602843e8a53..b8c25a17186b5 100644
--- a/drivers/auxdisplay/ht16k33.c
+++ b/drivers/auxdisplay/ht16k33.c
@@ -418,6 +418,33 @@ static int ht16k33_probe(struct i2c_client *client,
if (err)
return err;
+ /* Backlight */
+ memset(&bl_props, 0, sizeof(struct backlight_properties));
+ bl_props.type = BACKLIGHT_RAW;
+ bl_props.max_brightness = MAX_BRIGHTNESS;
+
+ bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl",
+ &client->dev, priv,
+ &ht16k33_bl_ops, &bl_props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ return PTR_ERR(bl);
+ }
+
+ err = of_property_read_u32(node, "default-brightness-level",
+ &dft_brightness);
+ if (err) {
+ dft_brightness = MAX_BRIGHTNESS;
+ } else if (dft_brightness > MAX_BRIGHTNESS) {
+ dev_warn(&client->dev,
+ "invalid default brightness level: %u, using %u\n",
+ dft_brightness, MAX_BRIGHTNESS);
+ dft_brightness = MAX_BRIGHTNESS;
+ }
+
+ bl->props.brightness = dft_brightness;
+ ht16k33_bl_update_status(bl);
+
/* Framebuffer (2 bytes per column) */
BUILD_BUG_ON(PAGE_SIZE < HT16K33_FB_SIZE);
fbdev->buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL);
@@ -450,6 +477,7 @@ static int ht16k33_probe(struct i2c_client *client,
fbdev->info->screen_size = HT16K33_FB_SIZE;
fbdev->info->fix = ht16k33_fb_fix;
fbdev->info->var = ht16k33_fb_var;
+ fbdev->info->bl_dev = bl;
fbdev->info->pseudo_palette = NULL;
fbdev->info->flags = FBINFO_FLAG_DEFAULT;
fbdev->info->par = priv;
@@ -462,34 +490,6 @@ static int ht16k33_probe(struct i2c_client *client,
if (err)
goto err_fbdev_unregister;
- /* Backlight */
- memset(&bl_props, 0, sizeof(struct backlight_properties));
- bl_props.type = BACKLIGHT_RAW;
- bl_props.max_brightness = MAX_BRIGHTNESS;
-
- bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl",
- &client->dev, priv,
- &ht16k33_bl_ops, &bl_props);
- if (IS_ERR(bl)) {
- dev_err(&client->dev, "failed to register backlight\n");
- err = PTR_ERR(bl);
- goto err_fbdev_unregister;
- }
-
- err = of_property_read_u32(node, "default-brightness-level",
- &dft_brightness);
- if (err) {
- dft_brightness = MAX_BRIGHTNESS;
- } else if (dft_brightness > MAX_BRIGHTNESS) {
- dev_warn(&client->dev,
- "invalid default brightness level: %u, using %u\n",
- dft_brightness, MAX_BRIGHTNESS);
- dft_brightness = MAX_BRIGHTNESS;
- }
-
- bl->props.brightness = dft_brightness;
- ht16k33_bl_update_status(bl);
-
ht16k33_fb_queue(priv);
return 0;
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 840fe258332544aa7321921e1723d37b772af7a9 ]
As the ht16k33 frame buffer sub-driver does not register an
fb_ops.fb_blank() handler, blanking does not work:
$ echo 1 > /sys/class/graphics/fb0/blank
sh: write error: Invalid argument
Fix this by providing a handler that always returns zero, to make sure
blank events will be sent to the actual device handling the backlight.
Reported-by: Robin van der Gracht <[email protected]>
Suggested-by: Robin van der Gracht <[email protected]>
Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/auxdisplay/ht16k33.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
index b8c25a17186b5..7e3858c4e030f 100644
--- a/drivers/auxdisplay/ht16k33.c
+++ b/drivers/auxdisplay/ht16k33.c
@@ -219,6 +219,15 @@ static const struct backlight_ops ht16k33_bl_ops = {
.check_fb = ht16k33_bl_check_fb,
};
+/*
+ * Blank events will be passed to the actual device handling the backlight when
+ * we return zero here.
+ */
+static int ht16k33_blank(int blank, struct fb_info *info)
+{
+ return 0;
+}
+
static int ht16k33_mmap(struct fb_info *info, struct vm_area_struct *vma)
{
struct ht16k33_priv *priv = info->par;
@@ -231,6 +240,7 @@ static const struct fb_ops ht16k33_fb_ops = {
.owner = THIS_MODULE,
.fb_read = fb_sys_read,
.fb_write = fb_sys_write,
+ .fb_blank = ht16k33_blank,
.fb_fillrect = sys_fillrect,
.fb_copyarea = sys_copyarea,
.fb_imageblit = sys_imageblit,
--
2.33.0
From: Alexey Gladkov <[email protected]>
[ Upstream commit d5f458a979650e5ed37212f6134e4ee2b28cb6ed ]
Fixes: 61ca2c4afd9d ("NFS: Only reference user namespace from nfs4idmap struct instead of cred")
Signed-off-by: Alexey Gladkov <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4idmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/nfs4idmap.c b/fs/nfs/nfs4idmap.c
index 8d8aba305ecca..f331866dd4182 100644
--- a/fs/nfs/nfs4idmap.c
+++ b/fs/nfs/nfs4idmap.c
@@ -487,7 +487,7 @@ nfs_idmap_new(struct nfs_client *clp)
err_destroy_pipe:
rpc_destroy_pipe_data(idmap->idmap_pipe);
err:
- get_user_ns(idmap->user_ns);
+ put_user_ns(idmap->user_ns);
kfree(idmap);
return error;
}
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit afcb5a811ff3ab3969f09666535eb6018a160358 ]
While writing an empty string to a device attribute is a no-op, and thus
does not need explicit safeguards, the user can still write a single
newline to an attribute file:
echo > .../message
If that happens, img_ascii_lcd_display() trims the newline, yielding an
empty string, and causing an infinite loop in img_ascii_lcd_scroll().
Fix this by adding a check for empty strings. Clear the display in case
one is encountered.
Fixes: 0cad855fbd083ee5 ("auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displays")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/auxdisplay/img-ascii-lcd.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c
index 1cce409ce5cac..e33ce0151cdfd 100644
--- a/drivers/auxdisplay/img-ascii-lcd.c
+++ b/drivers/auxdisplay/img-ascii-lcd.c
@@ -280,6 +280,16 @@ static int img_ascii_lcd_display(struct img_ascii_lcd_ctx *ctx,
if (msg[count - 1] == '\n')
count--;
+ if (!count) {
+ /* clear the LCD */
+ devm_kfree(&ctx->pdev->dev, ctx->message);
+ ctx->message = NULL;
+ ctx->message_len = 0;
+ memset(ctx->curr, ' ', ctx->cfg->num_chars);
+ ctx->cfg->update(ctx);
+ return 0;
+ }
+
new_msg = devm_kmalloc(&ctx->pdev->dev, count + 1, GFP_KERNEL);
if (!new_msg)
return -ENOMEM;
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit c3336b8ac6091df60a5c1049a8c685d0b947cc61 ]
Do not call rv3032_exit_eerd() if the enter function fails but don't
forget to call the exit when the enter succeeds.
Fixes: 2eeaa532acca ("rtc: rv3032: Add a driver for Microcrystal RV-3032")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/20211012101028.GT2083@kadam
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-rv3032.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/rtc-rv3032.c b/drivers/rtc/rtc-rv3032.c
index 3e67f71f42614..9e6166864bd73 100644
--- a/drivers/rtc/rtc-rv3032.c
+++ b/drivers/rtc/rtc-rv3032.c
@@ -617,11 +617,11 @@ static int rv3032_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
ret = rv3032_enter_eerd(rv3032, &eerd);
if (ret)
- goto exit_eerd;
+ return ret;
ret = regmap_write(rv3032->regmap, RV3032_CLKOUT1, hfd & 0xff);
if (ret)
- return ret;
+ goto exit_eerd;
ret = regmap_write(rv3032->regmap, RV3032_CLKOUT2, RV3032_CLKOUT2_OS |
FIELD_PREP(RV3032_CLKOUT2_HFD_MSK, hfd >> 8));
--
2.33.0
From: Claudiu Beznea <[email protected]>
[ Upstream commit 320c88a3104dc955f928a1eecebd551ff89530c0 ]
AT_XDMAC_CC_PERID() should be used to setup bits 24..30 of XDMAC_CC
register. Using it without parenthesis around 0x7f & (i) will lead to
setting all the time zero for bits 24..30 of XDMAC_CC as the << operator
has higher precedence over bitwise &. Thus, add paranthesis around
0x7f & (i).
Fixes: 15a03850ab8f ("dmaengine: at_xdmac: fix macro typo")
Signed-off-by: Claudiu Beznea <[email protected]>
Reviewed-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/at_xdmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 3b53115db2686..627ad74c879fd 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -145,7 +145,7 @@
#define AT_XDMAC_CC_WRIP (0x1 << 23) /* Write in Progress (read only) */
#define AT_XDMAC_CC_WRIP_DONE (0x0 << 23)
#define AT_XDMAC_CC_WRIP_IN_PROGRESS (0x1 << 23)
-#define AT_XDMAC_CC_PERID(i) (0x7f & (i) << 24) /* Channel Peripheral Identifier */
+#define AT_XDMAC_CC_PERID(i) ((0x7f & (i)) << 24) /* Channel Peripheral Identifier */
#define AT_XDMAC_CDS_MSP 0x2C /* Channel Data Stride Memory Set Pattern */
#define AT_XDMAC_CSUS 0x30 /* Channel Source Microblock Stride */
#define AT_XDMAC_CDUS 0x34 /* Channel Destination Microblock Stride */
--
2.33.0
From: Kunihiko Hayashi <[email protected]>
[ Upstream commit 4caab28a6215da5f3c1b505ff08810bc6acfe365 ]
The condition register PCI_RCV_INTX is used in irq_mask() and irq_unmask()
callbacks. Accesses to register can occur at the same time without a lock.
Add a lock into each callback to prevent the issue.
And INTX mask and unmask fields in PCL_RCV_INTX register should only be
set/reset for each bit. Clearing by PCL_RCV_INTX_ALL_MASK should be
removed.
INTX status fields in PCL_RCV_INTX register only indicates each INTX
interrupt status, so the handler can't clear by writing 1 to the field.
The status is expected to be cleared by the interrupt origin.
The ack function has no meaning, so should remove it.
Suggested-by: Pali Rohár <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 7e6d5cd88a6f ("PCI: uniphier: Add UniPhier PCIe host controller support")
Signed-off-by: Kunihiko Hayashi <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/dwc/pcie-uniphier.c | 26 +++++++++-------------
1 file changed, 10 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
index 48176265c867e..527ec8aeb602f 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier.c
@@ -171,30 +171,21 @@ static void uniphier_pcie_irq_enable(struct uniphier_pcie_priv *priv)
writel(PCL_RCV_INTX_ALL_ENABLE, priv->base + PCL_RCV_INTX);
}
-static void uniphier_pcie_irq_ack(struct irq_data *d)
-{
- struct pcie_port *pp = irq_data_get_irq_chip_data(d);
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
- u32 val;
-
- val = readl(priv->base + PCL_RCV_INTX);
- val &= ~PCL_RCV_INTX_ALL_STATUS;
- val |= BIT(irqd_to_hwirq(d) + PCL_RCV_INTX_STATUS_SHIFT);
- writel(val, priv->base + PCL_RCV_INTX);
-}
-
static void uniphier_pcie_irq_mask(struct irq_data *d)
{
struct pcie_port *pp = irq_data_get_irq_chip_data(d);
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
+ unsigned long flags;
u32 val;
+ raw_spin_lock_irqsave(&pp->lock, flags);
+
val = readl(priv->base + PCL_RCV_INTX);
- val &= ~PCL_RCV_INTX_ALL_MASK;
val |= BIT(irqd_to_hwirq(d) + PCL_RCV_INTX_MASK_SHIFT);
writel(val, priv->base + PCL_RCV_INTX);
+
+ raw_spin_unlock_irqrestore(&pp->lock, flags);
}
static void uniphier_pcie_irq_unmask(struct irq_data *d)
@@ -202,17 +193,20 @@ static void uniphier_pcie_irq_unmask(struct irq_data *d)
struct pcie_port *pp = irq_data_get_irq_chip_data(d);
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
+ unsigned long flags;
u32 val;
+ raw_spin_lock_irqsave(&pp->lock, flags);
+
val = readl(priv->base + PCL_RCV_INTX);
- val &= ~PCL_RCV_INTX_ALL_MASK;
val &= ~BIT(irqd_to_hwirq(d) + PCL_RCV_INTX_MASK_SHIFT);
writel(val, priv->base + PCL_RCV_INTX);
+
+ raw_spin_unlock_irqrestore(&pp->lock, flags);
}
static struct irq_chip uniphier_pcie_irq_chip = {
.name = "PCI",
- .irq_ack = uniphier_pcie_irq_ack,
.irq_mask = uniphier_pcie_irq_mask,
.irq_unmask = uniphier_pcie_irq_unmask,
};
--
2.33.0
From: Zev Weiss <[email protected]>
[ Upstream commit c13de2386c78e890d4ae6f01a85eefd0b293fb08 ]
Previously, if del_mtd_device() failed with -EBUSY due to a non-zero
usecount, a subsequent call to attempt the deletion again would try to
remove a debugfs directory that had already been removed and panic.
With this change the second call can instead proceed safely.
Fixes: e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries")
Signed-off-by: Zev Weiss <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/mtdcore.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 1c8c407286783..a5197a4819025 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -721,8 +721,6 @@ int del_mtd_device(struct mtd_info *mtd)
mutex_lock(&mtd_table_mutex);
- debugfs_remove_recursive(mtd->dbg.dfs_dir);
-
if (idr_find(&mtd_idr, mtd->index) != mtd) {
ret = -ENODEV;
goto out_error;
@@ -738,6 +736,8 @@ int del_mtd_device(struct mtd_info *mtd)
mtd->index, mtd->name, mtd->usecount);
ret = -EBUSY;
} else {
+ debugfs_remove_recursive(mtd->dbg.dfs_dir);
+
/* Try to remove the NVMEM provider */
if (mtd->nvmem)
nvmem_unregister(mtd->nvmem);
--
2.33.0
From: Evgeny Novikov <[email protected]>
[ Upstream commit 78e4d342187625585932bb437ec26e1060f7fc6f ]
hisi_spi_nor_probe() invokes clk_disable_unprepare() on all paths after
successful call of clk_prepare_enable(). Besides, the clock is enabled by
hispi_spi_nor_prep() and disabled by hispi_spi_nor_unprep(). So at remove
time it is not possible to have the clock enabled. The patch removes
excessive clk_disable_unprepare() from hisi_spi_nor_remove().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: e523f11141bd ("mtd: spi-nor: add hisilicon spi-nor flash controller driver")
Signed-off-by: Evgeny Novikov <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/spi-nor/controllers/hisi-sfc.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/controllers/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
index 440fc5ae7d34c..fd2c19a047485 100644
--- a/drivers/mtd/spi-nor/controllers/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
@@ -477,7 +477,6 @@ static int hisi_spi_nor_remove(struct platform_device *pdev)
hisi_spi_nor_unregister_all(host);
mutex_destroy(&host->lock);
- clk_disable_unprepare(host->clk);
return 0;
}
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 18b8f5b6fc53d097cadb94a93d8d6566ba88e389 ]
mips_cm_error_report() extracts the cause and other cause from the error
register using shifts. This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits. Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.
Fix this by using FIELD_GET() instead. Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.
Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Jiaxun Yang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/mips-cm.h | 12 ++++++------
arch/mips/kernel/mips-cm.c | 21 ++++++++++-----------
2 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index aeae2effa123d..23c67c0871b17 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -11,6 +11,7 @@
#ifndef __MIPS_ASM_MIPS_CM_H__
#define __MIPS_ASM_MIPS_CM_H__
+#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/errno.h>
@@ -153,8 +154,8 @@ GCR_ACCESSOR_RO(32, 0x030, rev)
#define CM_GCR_REV_MINOR GENMASK(7, 0)
#define CM_ENCODE_REV(major, minor) \
- (((major) << __ffs(CM_GCR_REV_MAJOR)) | \
- ((minor) << __ffs(CM_GCR_REV_MINOR)))
+ (FIELD_PREP(CM_GCR_REV_MAJOR, major) | \
+ FIELD_PREP(CM_GCR_REV_MINOR, minor))
#define CM_REV_CM2 CM_ENCODE_REV(6, 0)
#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
@@ -362,10 +363,10 @@ static inline int mips_cm_revision(void)
static inline unsigned int mips_cm_max_vp_width(void)
{
extern int smp_num_siblings;
- uint32_t cfg;
if (mips_cm_revision() >= CM_REV_CM3)
- return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW;
+ return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW,
+ read_gcr_sys_config2());
if (mips_cm_present()) {
/*
@@ -373,8 +374,7 @@ static inline unsigned int mips_cm_max_vp_width(void)
* number of VP(E)s, and if that ever changes then this will
* need revisiting.
*/
- cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE;
- return (cfg >> __ffs(CM_GCR_Cx_CONFIG_PVPE)) + 1;
+ return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1;
}
if (IS_ENABLED(CONFIG_SMP))
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index f60af512c8773..72c8374a39002 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -221,8 +221,7 @@ static void mips_cm_probe_l2sync(void)
phys_addr_t addr;
/* L2-only sync was introduced with CM major revision 6 */
- major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >>
- __ffs(CM_GCR_REV_MAJOR);
+ major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev());
if (major_rev < 6)
return;
@@ -305,13 +304,13 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
preempt_disable();
if (cm_rev >= CM_REV_CM3) {
- val = core << __ffs(CM3_GCR_Cx_OTHER_CORE);
- val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP);
+ val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) |
+ FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp);
if (cm_rev >= CM_REV_CM3_5) {
val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
- val |= cluster << __ffs(CM_GCR_Cx_OTHER_CLUSTER);
- val |= block << __ffs(CM_GCR_Cx_OTHER_BLOCK);
+ val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster);
+ val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block);
} else {
WARN_ON(cluster != 0);
WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
@@ -341,7 +340,7 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
per_cpu(cm_core_lock_flags, curr_core));
- val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM);
+ val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core);
}
write_gcr_cl_other(val);
@@ -385,8 +384,8 @@ void mips_cm_error_report(void)
cm_other = read_gcr_error_mult();
if (revision < CM_REV_CM3) { /* CM2 */
- cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE);
- ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
+ cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+ ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
if (!cause)
return;
@@ -444,8 +443,8 @@ void mips_cm_error_report(void)
ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
- cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE);
- ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
+ cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+ ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
if (!cause)
return;
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit 0374a4ea7269645c46c3eb288526ea072fa19e79 ]
If 'copy_dma_range_map() fails, the memory allocated for 'rvdev' will leak.
Move the 'copy_dma_range_map()' call after the device registration so
that 'rproc_rvdev_release()' can be called to free some resources.
Also, branch to the error handling path if 'copy_dma_range_map()' instead
of a direct return to avoid some other leaks.
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Jim Quinlan <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/e6d0dad6620da4fdf847faa903f79b735d35f262.1630755377.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/remoteproc_core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 47924d5ed4f56..369a97f3eca99 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -550,9 +550,6 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
/* Initialise vdev subdevice */
snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
rvdev->dev.parent = &rproc->dev;
- ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
- if (ret)
- return ret;
rvdev->dev.release = rproc_rvdev_release;
dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
dev_set_drvdata(&rvdev->dev, rvdev);
@@ -562,6 +559,11 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
put_device(&rvdev->dev);
return ret;
}
+
+ ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
+ if (ret)
+ goto free_rvdev;
+
/* Make device dma capable by inheriting from parent's capabilities */
set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
--
2.33.0
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 4c2b46c824a78fc8190d8eafaaea5a9078fe7479 ]
When op_alloc() returns NULL to new_op, no error return code of
orangefs_revalidate_lookup() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.
Fixes: 8bb8aefd5afb ("OrangeFS: Change almost all instances of the string PVFS2 to OrangeFS.")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Mike Marshall <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/orangefs/dcache.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/orangefs/dcache.c b/fs/orangefs/dcache.c
index fe484cf93e5cd..8bbe9486e3a62 100644
--- a/fs/orangefs/dcache.c
+++ b/fs/orangefs/dcache.c
@@ -26,8 +26,10 @@ static int orangefs_revalidate_lookup(struct dentry *dentry)
gossip_debug(GOSSIP_DCACHE_DEBUG, "%s: attempting lookup.\n", __func__);
new_op = op_alloc(ORANGEFS_VFS_OP_LOOKUP);
- if (!new_op)
+ if (!new_op) {
+ ret = -ENOMEM;
goto out_put_parent;
+ }
new_op->upcall.req.lookup.sym_follow = ORANGEFS_LOOKUP_LINK_NO_FOLLOW;
new_op->upcall.req.lookup.parent_refn = parent->refn;
--
2.33.0
From: Srikar Dronamraju <[email protected]>
[ Upstream commit 92cc6bf01c7f4c5cfefd1963985c0064687ebeda ]
Only code/declaration movement, in anticipation of doing a KVM-aware
vcpu_is_preempted(). No additional changes.
Signed-off-by: Srikar Dronamraju <[email protected]>
Acked-by: Waiman Long <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/firmware.h | 6 ------
arch/powerpc/include/asm/kvm_guest.h | 15 +++++++++++++++
arch/powerpc/include/asm/kvm_para.h | 2 +-
arch/powerpc/kernel/firmware.c | 1 +
arch/powerpc/platforms/pseries/smp.c | 1 +
5 files changed, 18 insertions(+), 7 deletions(-)
create mode 100644 arch/powerpc/include/asm/kvm_guest.h
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 0b295bdb201e8..aa6a5ef5d4830 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -134,12 +134,6 @@ extern int ibm_nmi_interlock_token;
extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
-bool is_kvm_guest(void);
-#else
-static inline bool is_kvm_guest(void) { return false; }
-#endif
-
#ifdef CONFIG_PPC_PSERIES
void pseries_probe_fw_features(void);
#else
diff --git a/arch/powerpc/include/asm/kvm_guest.h b/arch/powerpc/include/asm/kvm_guest.h
new file mode 100644
index 0000000000000..d2c946dbbd2c0
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_guest.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 IBM Corporation
+ */
+
+#ifndef _ASM_POWERPC_KVM_GUEST_H_
+#define _ASM_POWERPC_KVM_GUEST_H_
+
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
+bool is_kvm_guest(void);
+#else
+static inline bool is_kvm_guest(void) { return false; }
+#endif
+
+#endif /* _ASM_POWERPC_KVM_GUEST_H_ */
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index 744612054c94c..abe1b5e82547b 100644
--- a/arch/powerpc/include/asm/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -8,7 +8,7 @@
#ifndef __POWERPC_KVM_PARA_H__
#define __POWERPC_KVM_PARA_H__
-#include <asm/firmware.h>
+#include <asm/kvm_guest.h>
#include <uapi/asm/kvm_para.h>
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index fe48d319d490e..5f48e5ad24cdd 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -14,6 +14,7 @@
#include <linux/of.h>
#include <asm/firmware.h>
+#include <asm/kvm_guest.h>
#ifdef CONFIG_PPC64
unsigned long powerpc_firmware_features __read_mostly;
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 624e80b00eb18..7be7094075ab5 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -42,6 +42,7 @@
#include <asm/plpar_wrappers.h>
#include <asm/code-patching.h>
#include <asm/svm.h>
+#include <asm/kvm_guest.h>
#include "pseries.h"
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit 986b5094708e508baa452a23ffe809870934a7df ]
If an error occurs after a successful tegra_powergate_enable_clocks()
call, it must be undone by a tegra_powergate_disable_clocks() call, as
already done in the below and above error handling paths of this function.
Update the 'goto' to branch at the correct place of the error handling
path.
Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/tegra/pmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 0118bd986f902..857354a69c39d 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -705,7 +705,7 @@ static int tegra_powergate_power_up(struct tegra_powergate *pg,
err = reset_control_deassert(pg->reset);
if (err)
- goto powergate_off;
+ goto disable_clks;
usleep_range(10, 20);
--
2.33.0
From: Andreas Kemnade <[email protected]>
[ Upstream commit 884ea75d79a36faf3731ad9d6b9c29f58697638d ]
Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.
Fixes: ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7b8c18e6605e4..80c9e5e34136a 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -515,7 +515,7 @@
compatible = "bosch,bma180";
reg = <0x41>;
pinctrl-names = "default";
- pintcrl-0 = <&bma180_pins>;
+ pinctrl-0 = <&bma180_pins>;
interrupt-parent = <&gpio4>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
};
--
2.33.0
From: Ranjani Sridharan <[email protected]>
[ Upstream commit ec626334eaffe101df9ed79e161eba95124e64ad ]
When removing the topology components, do not power down
the primary core. Doing so will result in an IPC timeout
when the SOF PCI device runtime suspends.
Fixes: 0dcdf84289fb ("ASoC: SOF: add a "core" parameter to widget loading functions")
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/topology.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/sound/soc/sof/topology.c b/sound/soc/sof/topology.c
index 69313fbdb636a..b6327c30c2b5a 100644
--- a/sound/soc/sof/topology.c
+++ b/sound/soc/sof/topology.c
@@ -2590,6 +2590,15 @@ static int sof_widget_unload(struct snd_soc_component *scomp,
/* power down the pipeline schedule core */
pipeline = swidget->private;
+
+ /*
+ * Runtime PM should still function normally if topology loading fails and
+ * it's components are unloaded. Do not power down the primary core so that the
+ * CTX_SAVE IPC can succeed during runtime suspend.
+ */
+ if (pipeline->core == SOF_DSP_PRIMARY_CORE)
+ break;
+
ret = snd_sof_dsp_core_power_down(sdev, 1 << pipeline->core);
if (ret < 0)
dev_err(scomp->dev, "error: powering down pipeline schedule core %d\n",
--
2.33.0
From: Dongliang Mu <[email protected]>
[ Upstream commit 4ed2f3545c2e5acfbccd7f85fea5b1a82e9862d7 ]
The error handling code of fsl_ifc_ctrl_probe is problematic. When
fsl_ifc_ctrl_init fails or request_irq of fsl_ifc_ctrl_dev->irq fails,
it forgets to free the irq and nand_irq. Meanwhile, if request_irq of
fsl_ifc_ctrl_dev->nand_irq fails, it will still free nand_irq even if
the request_irq is not successful.
Fix this by refactoring the error handling code.
Fixes: d2ae2e20fbdd ("driver/memory:Move Freescale IFC driver to a common driver")
Signed-off-by: Dongliang Mu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/fsl_ifc.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index d062c2f8250f4..75a8c38df9394 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -263,7 +263,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
ret = fsl_ifc_ctrl_init(fsl_ifc_ctrl_dev);
if (ret < 0)
- goto err;
+ goto err_unmap_nandirq;
init_waitqueue_head(&fsl_ifc_ctrl_dev->nand_wait);
@@ -272,7 +272,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
if (ret != 0) {
dev_err(&dev->dev, "failed to install irq (%d)\n",
fsl_ifc_ctrl_dev->irq);
- goto err_irq;
+ goto err_unmap_nandirq;
}
if (fsl_ifc_ctrl_dev->nand_irq) {
@@ -281,17 +281,16 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
if (ret != 0) {
dev_err(&dev->dev, "failed to install irq (%d)\n",
fsl_ifc_ctrl_dev->nand_irq);
- goto err_nandirq;
+ goto err_free_irq;
}
}
return 0;
-err_nandirq:
- free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev);
- irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq);
-err_irq:
+err_free_irq:
free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
+err_unmap_nandirq:
+ irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq);
irq_dispose_mapping(fsl_ifc_ctrl_dev->irq);
err:
iounmap(fsl_ifc_ctrl_dev->gregs);
--
2.33.0
From: Christophe Leroy <[email protected]>
[ Upstream commit f2719b26ae27282c145202ffd656d5ff1fe737cc ]
While investigating a lockup at startup on Powerbook 3400C, it was
identified that the fbdev driver generates alignment exception at
startup:
--- interrupt: 600 at memset+0x60/0xc0
NIP: c0021414 LR: c03fc49c CTR: 00007fff
REGS: ca021c10 TRAP: 0600 Tainted: G W (5.14.2-pmac-00727-g12a41fa69492)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 44008442 XER: 20000100
DAR: cab80020 DSISR: 00017c07
GPR00: 00000007 ca021cd0 c14412e0 cab80000 00000000 00100000 cab8001c 00000004
GPR08: 00100000 00007fff 00000000 00000000 84008442 00000000 c0006fb4 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00100000
GPR24: 00000000 81800000 00000320 c15fa400 c14d1878 00000000 c14d1800 c094e19c
NIP [c0021414] memset+0x60/0xc0
LR [c03fc49c] chipsfb_pci_init+0x160/0x580
--- interrupt: 600
[ca021cd0] [c03fc46c] chipsfb_pci_init+0x130/0x580 (unreliable)
[ca021d20] [c03a3a70] pci_device_probe+0xf8/0x1b8
[ca021d50] [c043d584] really_probe.part.0+0xac/0x388
[ca021d70] [c043d914] __driver_probe_device+0xb4/0x170
[ca021d90] [c043da18] driver_probe_device+0x48/0x144
[ca021dc0] [c043e318] __driver_attach+0x11c/0x1c4
[ca021de0] [c043ad30] bus_for_each_dev+0x88/0xf0
[ca021e10] [c043c724] bus_add_driver+0x190/0x22c
[ca021e40] [c043ee94] driver_register+0x9c/0x170
[ca021e60] [c0006c28] do_one_initcall+0x54/0x1ec
[ca021ed0] [c08246e4] kernel_init_freeable+0x1c0/0x270
[ca021f10] [c0006fdc] kernel_init+0x28/0x11c
[ca021f30] [c0017148] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
7d4601a4 39490777 7d4701a4 39490888 7d4801a4 39490999 7d4901a4 39290aaa
7d2a01a4 4c00012c 4bfffe88 0fe00000 <4bfffe80> 9421fff0 38210010 48001970
This is due to 'dcbz' instruction being used on non-cached memory.
'dcbz' instruction is used by memset() to zeroize a complete
cacheline at once, and memset() is not expected to be used on non
cached memory.
When performing a 'sparse' check on fbdev driver, it also appears
that the use of memset() is unexpected:
drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces)
drivers/video/fbdev/chipsfb.c:334:17: expected void *
drivers/video/fbdev/chipsfb.c:334:17: got char [noderef] __iomem *screen_base
drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576
Use fb_memset() instead of memset(). fb_memset() is defined as
memset_io() for powerpc.
Fixes: 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK")
Reported-by: Stan Johnson <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/884a54f1e5cb774c1d9b4db780209bee5d4f6718.1631712563.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/chipsfb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 998067b701fa0..393894af26f84 100644
--- a/drivers/video/fbdev/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
@@ -331,7 +331,7 @@ static const struct fb_var_screeninfo chipsfb_var = {
static void init_chips(struct fb_info *p, unsigned long addr)
{
- memset(p->screen_base, 0, 0x100000);
+ fb_memset(p->screen_base, 0, 0x100000);
p->fix = chipsfb_fix;
p->fix.smem_start = addr;
--
2.33.0
From: Clément Léger <[email protected]>
[ Upstream commit c405f5c15e9f6094f2fa1658e73e56f3058e2122 ]
Currently, at91 pmc driver always register the syscore_ops whatever
the status of the pmc node that has been found. When set as secure
and disabled, the pmc should not be accessed or this will generate
abort exceptions.
To avoid this, add a check on node availability before registering
the syscore operations.
Signed-off-by: Clément Léger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Nicolas Ferre <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Fixes: b3b02eac33ed ("clk: at91: Add sama5d2 suspend/resume")
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/at91/pmc.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 20ee9dccee787..b40035b011d0a 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -267,6 +267,11 @@ static int __init pmc_register_ops(void)
if (!np)
return -ENODEV;
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+
pmcreg = device_node_to_regmap(np);
of_node_put(np);
if (IS_ERR(pmcreg))
--
2.33.0
From: Selvin Xavier <[email protected]>
[ Upstream commit 598d16fa1bf93431ad35bbab3ed1affe4fb7b562 ]
Fill the missing parameters for the FW command while querying SRQ.
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Selvin Xavier <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/qplib_fp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
index d4d4959c2434c..bd153aa7e9ab3 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
@@ -707,12 +707,13 @@ int bnxt_qplib_query_srq(struct bnxt_qplib_res *res,
int rc = 0;
RCFW_CMD_PREP(req, QUERY_SRQ, cmd_flags);
- req.srq_cid = cpu_to_le32(srq->id);
/* Configure the request */
sbuf = bnxt_qplib_rcfw_alloc_sbuf(rcfw, sizeof(*sb));
if (!sbuf)
return -ENOMEM;
+ req.resp_size = sizeof(*sb) / BNXT_QPLIB_CMDQE_UNITS;
+ req.srq_cid = cpu_to_le32(srq->id);
sb = sbuf->sb;
rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void *)&resp,
(void *)sbuf, 0);
--
2.33.0
From: Stephan Gerhold <[email protected]>
[ Upstream commit 8199a0b31e76d158ac14841e7119890461f8c595 ]
At the moment, playing audio on Secondary MI2S will just end up getting
stuck, without actually playing any audio. This happens because the wrong
bit clock is configured when playing audio on Secondary MI2S.
The PRI_I2S_CLK (better name: SPKR_I2S_CLK) is used by the SPKR audio mux
block that provides both Primary and Secondary MI2S.
The SEC_I2S_CLK (better name: MIC_I2S_CLK) is used by the MIC audio mux
block that provides Tertiary MI2S. Quaternary MI2S is also part of the
MIC audio mux but has its own clock (AUX_I2S_CLK).
This means that (quite confusingly) the SEC_I2S_CLK is not actually
used for Secondary MI2S as the name would suggest. Secondary MI2S
needs to have the same clock as Primary MI2S configured.
Fix the clock list for the lpass node in the device tree and add
a comment to clarify this confusing naming. With these changes,
audio can be played correctly on Secondary MI2S.
Cc: Srinivas Kandagatla <[email protected]>
Fixes: 3761a3618f55 ("arm64: dts: qcom: add lpass node")
Tested-by: Vincent Knecht <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0e34ed48b9fae..b1ffc056eea0b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1322,11 +1322,17 @@
lpass: audio-controller@7708000 {
status = "disabled";
compatible = "qcom,lpass-cpu-apq8016";
+
+ /*
+ * Note: Unlike the name would suggest, the SEC_I2S_CLK
+ * is actually only used by Tertiary MI2S while
+ * Primary/Secondary MI2S both use the PRI_I2S_CLK.
+ */
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
<&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
<&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
--
2.33.0
From: Takashi Iwai <[email protected]>
[ Upstream commit c4ca3871e21fa085096316f5f8d9975cf3dfde1d ]
The commit f87e7f25893d ("ALSA: hda - Improved position reporting on
SKL+") changed the PCM position report for SKL+ chips to use DPIB, but
according to Pierre, DPIB is no best choice for the accurate position
reports and it often reports too early. The recommended method is
rather the classical position buffer.
This patch makes the PCM position reporting on SKL+ back to the
position buffer again.
Fixes: f87e7f25893d ("ALSA: hda - Improved position reporting on SKL+")
Suggested-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 23 +----------------------
1 file changed, 1 insertion(+), 22 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index a0955e17adee9..64115a796af06 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -915,27 +915,6 @@ static int azx_get_delay_from_fifo(struct azx *chip, struct azx_dev *azx_dev,
return substream->runtime->delay;
}
-static unsigned int azx_skl_get_dpib_pos(struct azx *chip,
- struct azx_dev *azx_dev)
-{
- return _snd_hdac_chip_readl(azx_bus(chip),
- AZX_REG_VS_SDXDPIB_XBASE +
- (AZX_REG_VS_SDXDPIB_XINTERVAL *
- azx_dev->core.index));
-}
-
-/* get the current DMA position with correction on SKL+ chips */
-static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev)
-{
- /* DPIB register gives a more accurate position for playback */
- if (azx_dev->core.substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- return azx_skl_get_dpib_pos(chip, azx_dev);
-
- /* read of DPIB fetches the actual posbuf */
- azx_skl_get_dpib_pos(chip, azx_dev);
- return azx_get_pos_posbuf(chip, azx_dev);
-}
-
static void __azx_shutdown_chip(struct azx *chip, bool skip_link_reset)
{
azx_stop_chip(chip);
@@ -1632,7 +1611,7 @@ static void assign_position_fix(struct azx *chip, int fix)
[POS_FIX_POSBUF] = azx_get_pos_posbuf,
[POS_FIX_VIACOMBO] = azx_via_get_position,
[POS_FIX_COMBO] = azx_get_pos_lpib,
- [POS_FIX_SKL] = azx_get_pos_skl,
+ [POS_FIX_SKL] = azx_get_pos_posbuf,
[POS_FIX_FIFO] = azx_get_pos_fifo,
};
--
2.33.0
From: Jakub Kicinski <[email protected]>
[ Upstream commit 42dcfd850e514b229d616a53dec06d0f2533217c ]
Commit c6af0c227a22 ("ip: support SO_MARK cmsg")
added propagation of SO_MARK from cmsg to skb->mark.
For IPv4 and raw sockets the mark also affects route
lookup, but in case of IPv6 the flow info is
initialized before cmsg is parsed.
Fixes: c6af0c227a22 ("ip: support SO_MARK cmsg")
Reported-and-tested-by: Xintong Hu <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/udp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index bae6b51a9bd46..8a1863146f34c 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1420,7 +1420,6 @@ do_udp_sendmsg:
if (!fl6.flowi6_oif)
fl6.flowi6_oif = np->sticky_pktinfo.ipi6_ifindex;
- fl6.flowi6_mark = ipc6.sockc.mark;
fl6.flowi6_uid = sk->sk_uid;
if (msg->msg_controllen) {
@@ -1456,6 +1455,7 @@ do_udp_sendmsg:
ipc6.opt = opt;
fl6.flowi6_proto = sk->sk_protocol;
+ fl6.flowi6_mark = ipc6.sockc.mark;
fl6.daddr = *daddr;
if (ipv6_addr_any(&fl6.saddr) && !ipv6_addr_any(&np->saddr))
fl6.saddr = np->saddr;
--
2.33.0
From: Andy Shevchenko <[email protected]>
[ Upstream commit 7db4f2cacbede1c6d95552c0d10e77398665a733 ]
In case we would initialize two IIO devices from one physical device,
we shouldn't have a clash on regulators. That's why move
st_sensors_power_enable() call from core to bus drivers.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/accel/st_accel_core.c | 21 +++++----------------
drivers/iio/accel/st_accel_i2c.c | 17 +++++++++++++++--
drivers/iio/accel/st_accel_spi.c | 17 +++++++++++++++--
drivers/iio/gyro/st_gyro_core.c | 15 +++------------
drivers/iio/gyro/st_gyro_i2c.c | 17 +++++++++++++++--
drivers/iio/gyro/st_gyro_spi.c | 17 +++++++++++++++--
drivers/iio/magnetometer/st_magn_core.c | 15 +++------------
drivers/iio/magnetometer/st_magn_i2c.c | 14 +++++++++++++-
drivers/iio/magnetometer/st_magn_spi.c | 14 +++++++++++++-
drivers/iio/pressure/st_pressure_core.c | 15 +++------------
drivers/iio/pressure/st_pressure_i2c.c | 17 +++++++++++++++--
drivers/iio/pressure/st_pressure_spi.c | 17 +++++++++++++++--
12 files changed, 130 insertions(+), 66 deletions(-)
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 43c50167d220c..bde0ca3ef7a4c 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -1255,13 +1255,9 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &accel_info;
- err = st_sensors_power_enable(indio_dev);
- if (err)
- return err;
-
err = st_sensors_verify_id(indio_dev);
if (err < 0)
- goto st_accel_power_off;
+ return err;
adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
@@ -1270,10 +1266,8 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
channels = devm_kmemdup(&indio_dev->dev,
adata->sensor_settings->ch,
channels_size, GFP_KERNEL);
- if (!channels) {
- err = -ENOMEM;
- goto st_accel_power_off;
- }
+ if (!channels)
+ return -ENOMEM;
if (apply_acpi_orientation(indio_dev, channels))
dev_warn(&indio_dev->dev,
@@ -1288,11 +1282,11 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
- goto st_accel_power_off;
+ return err;
err = st_accel_allocate_ring(indio_dev);
if (err < 0)
- goto st_accel_power_off;
+ return err;
if (adata->irq > 0) {
err = st_sensors_allocate_trigger(indio_dev,
@@ -1315,9 +1309,6 @@ st_accel_device_register_error:
st_sensors_deallocate_trigger(indio_dev);
st_accel_probe_trigger_error:
st_accel_deallocate_ring(indio_dev);
-st_accel_power_off:
- st_sensors_power_disable(indio_dev);
-
return err;
}
EXPORT_SYMBOL(st_accel_common_probe);
@@ -1326,8 +1317,6 @@ void st_accel_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *adata = iio_priv(indio_dev);
- st_sensors_power_disable(indio_dev);
-
iio_device_unregister(indio_dev);
if (adata->irq > 0)
st_sensors_deallocate_trigger(indio_dev);
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 360e16f2cadb9..95e305b88d5ed 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -174,16 +174,29 @@ static int st_accel_i2c_probe(struct i2c_client *client)
if (ret < 0)
return ret;
+ ret = st_sensors_power_enable(indio_dev);
+ if (ret)
+ return ret;
+
ret = st_accel_common_probe(indio_dev);
if (ret < 0)
- return ret;
+ goto st_accel_power_off;
return 0;
+
+st_accel_power_off:
+ st_sensors_power_disable(indio_dev);
+
+ return ret;
}
static int st_accel_i2c_remove(struct i2c_client *client)
{
- st_accel_common_remove(i2c_get_clientdata(client));
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ st_sensors_power_disable(indio_dev);
+
+ st_accel_common_remove(indio_dev);
return 0;
}
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 568ff1bae0eee..83d3308ce5ccc 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -123,16 +123,29 @@ static int st_accel_spi_probe(struct spi_device *spi)
if (err < 0)
return err;
+ err = st_sensors_power_enable(indio_dev);
+ if (err)
+ return err;
+
err = st_accel_common_probe(indio_dev);
if (err < 0)
- return err;
+ goto st_accel_power_off;
return 0;
+
+st_accel_power_off:
+ st_sensors_power_disable(indio_dev);
+
+ return err;
}
static int st_accel_spi_remove(struct spi_device *spi)
{
- st_accel_common_remove(spi_get_drvdata(spi));
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+ st_sensors_power_disable(indio_dev);
+
+ st_accel_common_remove(indio_dev);
return 0;
}
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index c8aa051995d3b..8c87f85f20bd1 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -466,13 +466,9 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &gyro_info;
- err = st_sensors_power_enable(indio_dev);
- if (err)
- return err;
-
err = st_sensors_verify_id(indio_dev);
if (err < 0)
- goto st_gyro_power_off;
+ return err;
gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
indio_dev->channels = gdata->sensor_settings->ch;
@@ -485,11 +481,11 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
- goto st_gyro_power_off;
+ return err;
err = st_gyro_allocate_ring(indio_dev);
if (err < 0)
- goto st_gyro_power_off;
+ return err;
if (gdata->irq > 0) {
err = st_sensors_allocate_trigger(indio_dev,
@@ -512,9 +508,6 @@ st_gyro_device_register_error:
st_sensors_deallocate_trigger(indio_dev);
st_gyro_probe_trigger_error:
st_gyro_deallocate_ring(indio_dev);
-st_gyro_power_off:
- st_sensors_power_disable(indio_dev);
-
return err;
}
EXPORT_SYMBOL(st_gyro_common_probe);
@@ -523,8 +516,6 @@ void st_gyro_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *gdata = iio_priv(indio_dev);
- st_sensors_power_disable(indio_dev);
-
iio_device_unregister(indio_dev);
if (gdata->irq > 0)
st_sensors_deallocate_trigger(indio_dev);
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index 8190966e6ff0a..a25cc0379e163 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -86,16 +86,29 @@ static int st_gyro_i2c_probe(struct i2c_client *client,
if (err < 0)
return err;
+ err = st_sensors_power_enable(indio_dev);
+ if (err)
+ return err;
+
err = st_gyro_common_probe(indio_dev);
if (err < 0)
- return err;
+ goto st_gyro_power_off;
return 0;
+
+st_gyro_power_off:
+ st_sensors_power_disable(indio_dev);
+
+ return err;
}
static int st_gyro_i2c_remove(struct i2c_client *client)
{
- st_gyro_common_remove(i2c_get_clientdata(client));
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ st_sensors_power_disable(indio_dev);
+
+ st_gyro_common_remove(indio_dev);
return 0;
}
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index efb862763ca3d..18d6a2aeda45a 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -90,16 +90,29 @@ static int st_gyro_spi_probe(struct spi_device *spi)
if (err < 0)
return err;
+ err = st_sensors_power_enable(indio_dev);
+ if (err)
+ return err;
+
err = st_gyro_common_probe(indio_dev);
if (err < 0)
- return err;
+ goto st_gyro_power_off;
return 0;
+
+st_gyro_power_off:
+ st_sensors_power_disable(indio_dev);
+
+ return err;
}
static int st_gyro_spi_remove(struct spi_device *spi)
{
- st_gyro_common_remove(spi_get_drvdata(spi));
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+ st_sensors_power_disable(indio_dev);
+
+ st_gyro_common_remove(indio_dev);
return 0;
}
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 79de721e60159..0fc38f17dbe04 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -494,13 +494,9 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &magn_info;
- err = st_sensors_power_enable(indio_dev);
- if (err)
- return err;
-
err = st_sensors_verify_id(indio_dev);
if (err < 0)
- goto st_magn_power_off;
+ return err;
mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
indio_dev->channels = mdata->sensor_settings->ch;
@@ -511,11 +507,11 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
err = st_sensors_init_sensor(indio_dev, NULL);
if (err < 0)
- goto st_magn_power_off;
+ return err;
err = st_magn_allocate_ring(indio_dev);
if (err < 0)
- goto st_magn_power_off;
+ return err;
if (mdata->irq > 0) {
err = st_sensors_allocate_trigger(indio_dev,
@@ -538,9 +534,6 @@ st_magn_device_register_error:
st_sensors_deallocate_trigger(indio_dev);
st_magn_probe_trigger_error:
st_magn_deallocate_ring(indio_dev);
-st_magn_power_off:
- st_sensors_power_disable(indio_dev);
-
return err;
}
EXPORT_SYMBOL(st_magn_common_probe);
@@ -549,8 +542,6 @@ void st_magn_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *mdata = iio_priv(indio_dev);
- st_sensors_power_disable(indio_dev);
-
iio_device_unregister(indio_dev);
if (mdata->irq > 0)
st_sensors_deallocate_trigger(indio_dev);
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index c6bb4ce775943..7a7ab27379fc1 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -78,16 +78,28 @@ static int st_magn_i2c_probe(struct i2c_client *client,
if (err < 0)
return err;
+ err = st_sensors_power_enable(indio_dev);
+ if (err)
+ return err;
+
err = st_magn_common_probe(indio_dev);
if (err < 0)
- return err;
+ goto st_magn_power_off;
return 0;
+
+st_magn_power_off:
+ st_sensors_power_disable(indio_dev);
+
+ return err;
}
static int st_magn_i2c_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ st_sensors_power_disable(indio_dev);
+
st_magn_common_remove(indio_dev);
return 0;
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index 3d08d74c367da..ee352f083c020 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -72,16 +72,28 @@ static int st_magn_spi_probe(struct spi_device *spi)
if (err < 0)
return err;
+ err = st_sensors_power_enable(indio_dev);
+ if (err)
+ return err;
+
err = st_magn_common_probe(indio_dev);
if (err < 0)
- return err;
+ goto st_magn_power_off;
return 0;
+
+st_magn_power_off:
+ st_sensors_power_disable(indio_dev);
+
+ return err;
}
static int st_magn_spi_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+ st_sensors_power_disable(indio_dev);
+
st_magn_common_remove(indio_dev);
return 0;
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 789a2928504a7..7912b5a683955 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -689,13 +689,9 @@ int st_press_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &press_info;
- err = st_sensors_power_enable(indio_dev);
- if (err)
- return err;
-
err = st_sensors_verify_id(indio_dev);
if (err < 0)
- goto st_press_power_off;
+ return err;
/*
* Skip timestamping channel while declaring available channels to
@@ -718,11 +714,11 @@ int st_press_common_probe(struct iio_dev *indio_dev)
err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
- goto st_press_power_off;
+ return err;
err = st_press_allocate_ring(indio_dev);
if (err < 0)
- goto st_press_power_off;
+ return err;
if (press_data->irq > 0) {
err = st_sensors_allocate_trigger(indio_dev,
@@ -745,9 +741,6 @@ st_press_device_register_error:
st_sensors_deallocate_trigger(indio_dev);
st_press_probe_trigger_error:
st_press_deallocate_ring(indio_dev);
-st_press_power_off:
- st_sensors_power_disable(indio_dev);
-
return err;
}
EXPORT_SYMBOL(st_press_common_probe);
@@ -756,8 +749,6 @@ void st_press_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *press_data = iio_priv(indio_dev);
- st_sensors_power_disable(indio_dev);
-
iio_device_unregister(indio_dev);
if (press_data->irq > 0)
st_sensors_deallocate_trigger(indio_dev);
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 09c6903f99b87..f0a5af314ceb8 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -98,16 +98,29 @@ static int st_press_i2c_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ ret = st_sensors_power_enable(indio_dev);
+ if (ret)
+ return ret;
+
ret = st_press_common_probe(indio_dev);
if (ret < 0)
- return ret;
+ goto st_press_power_off;
return 0;
+
+st_press_power_off:
+ st_sensors_power_disable(indio_dev);
+
+ return ret;
}
static int st_press_i2c_remove(struct i2c_client *client)
{
- st_press_common_remove(i2c_get_clientdata(client));
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ st_sensors_power_disable(indio_dev);
+
+ st_press_common_remove(indio_dev);
return 0;
}
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index b5ee3ec2764ff..b48cf7d01cd74 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -82,16 +82,29 @@ static int st_press_spi_probe(struct spi_device *spi)
if (err < 0)
return err;
+ err = st_sensors_power_enable(indio_dev);
+ if (err)
+ return err;
+
err = st_press_common_probe(indio_dev);
if (err < 0)
- return err;
+ goto st_press_power_off;
return 0;
+
+st_press_power_off:
+ st_sensors_power_disable(indio_dev);
+
+ return err;
}
static int st_press_spi_remove(struct spi_device *spi)
{
- st_press_common_remove(spi_get_drvdata(spi));
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+ st_sensors_power_disable(indio_dev);
+
+ st_press_common_remove(indio_dev);
return 0;
}
--
2.33.0
From: Alexei Starovoitov <[email protected]>
[ Upstream commit b9979db8340154526d9ab38a1883d6f6ba9b6d47 ]
Before this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0xffffffff))
After this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0x1))
While processing BPF_JLE the reg_set_min_max() would set true_reg->umax_value = 1
and call __reg_combine_64_into_32(true_reg).
Without the fix it would not pass the condition:
if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value))
since umin_value == 0 at this point.
Before commit 10bf4e83167c the umin was incorrectly ingored.
The commit 10bf4e83167c fixed the correctness issue, but pessimized
propagation of 64-bit min max into 32-bit min max and corresponding var_off.
Fixes: 10bf4e83167c ("bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds")
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 2 +-
tools/testing/selftests/bpf/verifier/array_access.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 0c26757ea7fbb..c56739a4a4219 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1303,7 +1303,7 @@ static bool __reg64_bound_s32(s64 a)
static bool __reg64_bound_u32(u64 a)
{
- return a > U32_MIN && a < U32_MAX;
+ return a >= U32_MIN && a <= U32_MAX;
}
static void __reg_combine_64_into_32(struct bpf_reg_state *reg)
diff --git a/tools/testing/selftests/bpf/verifier/array_access.c b/tools/testing/selftests/bpf/verifier/array_access.c
index 1b1c798e92489..1b138cd2b187d 100644
--- a/tools/testing/selftests/bpf/verifier/array_access.c
+++ b/tools/testing/selftests/bpf/verifier/array_access.c
@@ -186,7 +186,7 @@
},
.fixup_map_hash_48b = { 3 },
.errstr_unpriv = "R0 leaks addr",
- .errstr = "R0 unbounded memory access",
+ .errstr = "invalid access to map value, value_size=48 off=44 size=8",
.result_unpriv = REJECT,
.result = REJECT,
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
--
2.33.0
From: Alexei Starovoitov <[email protected]>
[ Upstream commit 388e2c0b978339dee9b0a81a2e546f8979e021e2 ]
Similar to unsigned bounds propagation fix signed bounds.
The 'Fixes' tag is a hint. There is no security bug here.
The verifier was too conservative.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index c56739a4a4219..a15826a9a644f 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1298,7 +1298,7 @@ static void __reg_combine_32_into_64(struct bpf_reg_state *reg)
static bool __reg64_bound_s32(s64 a)
{
- return a > S32_MIN && a < S32_MAX;
+ return a >= S32_MIN && a <= S32_MAX;
}
static bool __reg64_bound_u32(u64 a)
--
2.33.0
From: Dan Schatzberg <[email protected]>
[ Upstream commit 81c49d39aea8a10e6d05d3aa1cb65ceb721e19b0 ]
In account_guest_time in kernel/sched/cputime.c guest time is
attributed to both CPUTIME_NICE and CPUTIME_USER in addition to
CPUTIME_GUEST_NICE and CPUTIME_GUEST respectively. Therefore, adding
both to calculate usage results in double counting any guest time at
the rootcg.
Fixes: 936f2a70f207 ("cgroup: add cpu.stat file to root cgroup")
Signed-off-by: Dan Schatzberg <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cgroup/rstat.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c
index d51175cedfca4..89ca9b61aa0d9 100644
--- a/kernel/cgroup/rstat.c
+++ b/kernel/cgroup/rstat.c
@@ -421,8 +421,6 @@ static void root_cgroup_cputime(struct task_cputime *cputime)
cputime->sum_exec_runtime += user;
cputime->sum_exec_runtime += sys;
cputime->sum_exec_runtime += cpustat[CPUTIME_STEAL];
- cputime->sum_exec_runtime += cpustat[CPUTIME_GUEST];
- cputime->sum_exec_runtime += cpustat[CPUTIME_GUEST_NICE];
}
}
--
2.33.0
From: Sukadev Bhattiprolu <[email protected]>
[ Upstream commit 8878e46fcfd46b19964bd90e13b25dd94cbfc9be ]
If adapter's resetting bit is on, discard the packet but don't stop the
transmit queue - instead leave that to the reset code. With this change,
it is possible that we may get several calls to ibmvnic_xmit() that simply
discard packets and return.
But if we stop the queue here, we might end up doing so just after
__ibmvnic_open() started the queues (during a hard/soft reset) and before
the ->resetting bit was cleared. If that happens, there will be no one to
restart queue and transmissions will be blocked indefinitely.
This can cause a TIMEOUT reset and with auto priority failover enabled,
an unnecessary FAILOVER reset to less favored backing device and then a
FAILOVER back to the most favored backing device. If we hit the window
repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER
resets leaving the adapter unusable for extended periods of time.
Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit")
Reported-by: Abdul Haleem <[email protected]>
Reported-by: Vaishnavi Bhat <[email protected]>
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Reviewed-by: Dany Madden <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index bb8d0a0f48ee0..c470dbc03a23e 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1548,8 +1548,6 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
netdev_tx_t ret = NETDEV_TX_OK;
if (test_bit(0, &adapter->resetting)) {
- if (!netif_subqueue_stopped(netdev, skb))
- netif_stop_subqueue(netdev, queue_num);
dev_kfree_skb_any(skb);
tx_send_failed++;
--
2.33.0
From: Jakub Kicinski <[email protected]>
[ Upstream commit 24bcbe1cc69fa52dc4f7b5b2456678ed464724d8 ]
sk_stream_kill_queues() can be called on close when there are
still outstanding skbs to transmit. Those skbs may try to queue
notifications to the error queue (e.g. timestamps).
If sk_stream_kill_queues() purges the queue without taking
its lock the queue may get corrupted, and skbs leaked.
This shows up as a warning about an rmem leak:
WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x...
The leak is always a multiple of 0x300 bytes (the value is in
%rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of
an empty sk_buff. Indeed if we dump the socket state at the time
of the warning the sk_error_queue is often (but not always)
corrupted. The ->next pointer points back at the list head,
but not the ->prev pointer. Indeed we can find the leaked skb
by scanning the kernel memory for something that looks like
an skb with ->sk = socket in question, and ->truesize = 0x300.
The contents of ->cb[] of the skb confirms the suspicion that
it is indeed a timestamp notification (as generated in
__skb_complete_tx_timestamp()).
Removing purging of sk_error_queue should be okay, since
inet_sock_destruct() does it again once all socket refs
are gone. Eric suggests this may cause sockets that go
thru disconnect() to maintain notifications from the
previous incarnations of the socket, but that should be
okay since the race was there anyway, and disconnect()
is not exactly dependable.
Thanks to Jonathan Lemon and Omar Sandoval for help at various
stages of tracing the issue.
Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/stream.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/core/stream.c b/net/core/stream.c
index 4f1d4aa5fb38d..a166a32b411fa 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -195,9 +195,6 @@ void sk_stream_kill_queues(struct sock *sk)
/* First the read buffer. */
__skb_queue_purge(&sk->sk_receive_queue);
- /* Next, the error queue. */
- __skb_queue_purge(&sk->sk_error_queue);
-
/* Next, the write queue. */
WARN_ON(!skb_queue_empty(&sk->sk_write_queue));
--
2.33.0
From: Andrii Nakryiko <[email protected]>
[ Upstream commit c825f5fee19caf301d9821cd79abaa734322de26 ]
Original code assumed fixed and correct BTF header length. That's not
always the case, though, so fix this bug with a proper additional check.
And use actual header length instead of sizeof(struct btf_header) in
sanity checks.
Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Reported-by: Evgeny Vereshchagin <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index c15eb14a711e5..e6f644cdc9f15 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -205,13 +205,19 @@ static int btf_parse_hdr(struct btf *btf)
}
btf_bswap_hdr(hdr);
} else if (hdr->magic != BTF_MAGIC) {
- pr_debug("Invalid BTF magic:%x\n", hdr->magic);
+ pr_debug("Invalid BTF magic: %x\n", hdr->magic);
return -EINVAL;
}
- meta_left = btf->raw_size - sizeof(*hdr);
+ if (btf->raw_size < hdr->hdr_len) {
+ pr_debug("BTF header len %u larger than data size %u\n",
+ hdr->hdr_len, btf->raw_size);
+ return -EINVAL;
+ }
+
+ meta_left = btf->raw_size - hdr->hdr_len;
if (meta_left < (long long)hdr->str_off + hdr->str_len) {
- pr_debug("Invalid BTF total size:%u\n", btf->raw_size);
+ pr_debug("Invalid BTF total size: %u\n", btf->raw_size);
return -EINVAL;
}
--
2.33.0
From: Claudio Imbrenda <[email protected]>
[ Upstream commit d4074324b07a94a1fca476d452dfbb3a4e7bf656 ]
If kvm_s390_pv_destroy_cpu is called more than once, we risk calling
free_page on a random page, since the sidad field is aliased with the
gbea, which is not guaranteed to be zero.
This can happen, for example, if userspace calls the KVM_PV_DISABLE
IOCTL, and it fails, and then userspace calls the same IOCTL again.
This scenario is only possible if KVM has some serious bug or if the
hardware is broken.
The solution is to simply return successfully immediately if the vCPU
was already non secure.
Signed-off-by: Claudio Imbrenda <[email protected]>
Fixes: 19e1227768863a1469797c13ef8fea1af7beac2c ("KVM: S390: protvirt: Introduce instruction data area bounce buffer")
Reviewed-by: Janosch Frank <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Janosch Frank <[email protected]>
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kvm/pv.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/arch/s390/kvm/pv.c b/arch/s390/kvm/pv.c
index f5847f9dec7c9..74265304dd9cd 100644
--- a/arch/s390/kvm/pv.c
+++ b/arch/s390/kvm/pv.c
@@ -16,18 +16,17 @@
int kvm_s390_pv_destroy_cpu(struct kvm_vcpu *vcpu, u16 *rc, u16 *rrc)
{
- int cc = 0;
+ int cc;
- if (kvm_s390_pv_cpu_get_handle(vcpu)) {
- cc = uv_cmd_nodata(kvm_s390_pv_cpu_get_handle(vcpu),
- UVC_CMD_DESTROY_SEC_CPU, rc, rrc);
+ if (!kvm_s390_pv_cpu_get_handle(vcpu))
+ return 0;
+
+ cc = uv_cmd_nodata(kvm_s390_pv_cpu_get_handle(vcpu), UVC_CMD_DESTROY_SEC_CPU, rc, rrc);
+
+ KVM_UV_EVENT(vcpu->kvm, 3, "PROTVIRT DESTROY VCPU %d: rc %x rrc %x",
+ vcpu->vcpu_id, *rc, *rrc);
+ WARN_ONCE(cc, "protvirt destroy cpu failed rc %x rrc %x", *rc, *rrc);
- KVM_UV_EVENT(vcpu->kvm, 3,
- "PROTVIRT DESTROY VCPU %d: rc %x rrc %x",
- vcpu->vcpu_id, *rc, *rrc);
- WARN_ONCE(cc, "protvirt destroy cpu failed rc %x rrc %x",
- *rc, *rrc);
- }
/* Intended memory leak for something that should never happen. */
if (!cc)
free_pages(vcpu->arch.pv.stor_base,
--
2.33.0
From: Andrii Nakryiko <[email protected]>
[ Upstream commit b8d52264df85ec12f370c0a8b28d0ac59a05877a ]
Empty BTFs do come up (e.g., simple kernel modules with no new types and
strings, compared to the vmlinux BTF) and there is nothing technically wrong
with them. So remove unnecessary check preventing loading empty BTFs.
Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Christopher William Snowhill <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index 987c1515b828b..c8c751265e23a 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -210,11 +210,6 @@ static int btf_parse_hdr(struct btf *btf)
}
meta_left = btf->raw_size - sizeof(*hdr);
- if (!meta_left) {
- pr_debug("BTF has no data\n");
- return -EINVAL;
- }
-
if (meta_left < hdr->str_off + hdr->str_len) {
pr_debug("Invalid BTF total size:%u\n", btf->raw_size);
return -EINVAL;
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit c1c8380b0320ab757e60ed90efc8b1992a943256 ]
The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.
This means that "start" becomes a very high positive value. The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop. Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.
Fixes: 75388acd0cd8 ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Michael Büsch <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20211006073542.GD8404@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/b43legacy/radio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/b43legacy/radio.c b/drivers/net/wireless/broadcom/b43legacy/radio.c
index 06891b4f837b9..fdf78c10a05c2 100644
--- a/drivers/net/wireless/broadcom/b43legacy/radio.c
+++ b/drivers/net/wireless/broadcom/b43legacy/radio.c
@@ -283,7 +283,7 @@ u8 b43legacy_radio_aci_scan(struct b43legacy_wldev *dev)
& 0x7FFF);
b43legacy_set_all_gains(dev, 3, 8, 1);
- start = (channel - 5 > 0) ? channel - 5 : 1;
+ start = (channel > 5) ? channel - 5 : 1;
end = (channel + 5 < 14) ? channel + 5 : 13;
for (i = start; i <= end; i++) {
--
2.33.0
From: Sukadev Bhattiprolu <[email protected]>
[ Upstream commit 6e20d00158f31f7631d68b86996b7e951c4451c8 ]
Soon after registering a CRQ it is possible that we get a fail over or
maybe a CRQ_INIT from the VIOS while interrupts were disabled.
Look for any such CRQs after enabling interrupts.
Otherwise we can intermittently fail to bring up ibmvnic adapters during
boot, specially in kexec/kdump kernels.
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Reported-by: Vaishnavi Bhat <[email protected]>
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Reviewed-by: Dany Madden <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index c470dbc03a23e..4f99d97638248 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -5185,6 +5185,9 @@ static int init_crq_queue(struct ibmvnic_adapter *adapter)
crq->cur = 0;
spin_lock_init(&crq->lock);
+ /* process any CRQs that were queued before we enabled interrupts */
+ tasklet_schedule(&adapter->tasklet);
+
return retrc;
req_irq_failed:
--
2.33.0
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 5245dafe3d49efba4d3285cf27ee1cc1eeafafc6 ]
btf_header's str_off+str_len or type_off+type_len can overflow as they
are u32s. This will lead to bypassing the sanity checks during BTF
parsing, resulting in crashes afterwards. Fix by using 64-bit signed
integers for comparison.
Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Evgeny Vereshchagin <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index c8c751265e23a..c15eb14a711e5 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -210,12 +210,12 @@ static int btf_parse_hdr(struct btf *btf)
}
meta_left = btf->raw_size - sizeof(*hdr);
- if (meta_left < hdr->str_off + hdr->str_len) {
+ if (meta_left < (long long)hdr->str_off + hdr->str_len) {
pr_debug("Invalid BTF total size:%u\n", btf->raw_size);
return -EINVAL;
}
- if (hdr->type_off + hdr->type_len > hdr->str_off) {
+ if ((long long)hdr->type_off + hdr->type_len > hdr->str_off) {
pr_debug("Invalid BTF data sections layout: type data at %u + %u, strings data at %u + %u\n",
hdr->type_off, hdr->type_len, hdr->str_off, hdr->str_len);
return -EINVAL;
--
2.33.0
From: Colin Ian King <[email protected]>
[ Upstream commit 7266dda2f1dfe151b12ef0c14eb4d4e622fb211c ]
Currently a call to snd_card_new that fails will set card with a NULL
pointer, this causes a null pointer dereference on the error cleanup
path when card it passed to snd_card_free. Fix this by adding a new
error exit path that does not call snd_card_free and exiting via this
new path.
Addresses-Coverity: ("Explicit null dereference")
Fixes: 9e44d63246a9 ("[media] cx23885: Add ALSA support")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/cx23885/cx23885-alsa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c
index 13689c5dd47ff..9154031c087d4 100644
--- a/drivers/media/pci/cx23885/cx23885-alsa.c
+++ b/drivers/media/pci/cx23885/cx23885-alsa.c
@@ -550,7 +550,7 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
THIS_MODULE, sizeof(struct cx23885_audio_dev), &card);
if (err < 0)
- goto error;
+ goto error_msg;
chip = (struct cx23885_audio_dev *) card->private_data;
chip->dev = dev;
@@ -576,6 +576,7 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
error:
snd_card_free(card);
+error_msg:
pr_err("%s(): Failed to register analog audio adapter\n",
__func__);
--
2.33.0
From: Evgeny Novikov <[email protected]>
[ Upstream commit 69a10678e2fba3d182e78ea041f2d1b1a6058764 ]
mn88443x_cmn_power_on() did not handle possible errors of
clk_prepare_enable() and always finished successfully so that its caller
mn88443x_probe() did not care about failed preparing/enabling of clocks
as well.
Add missed error handling in both mn88443x_cmn_power_on() and
mn88443x_probe(). This required to change the return value of the former
from "void" to "int".
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 0f408ce8941f ("media: dvb-frontends: add Socionext MN88443x ISDB-S/T demodulator driver")
Signed-off-by: Evgeny Novikov <[email protected]>
Co-developed-by: Kirill Shilimanov <[email protected]>
Signed-off-by: Kirill Shilimanov <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/dvb-frontends/mn88443x.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/media/dvb-frontends/mn88443x.c b/drivers/media/dvb-frontends/mn88443x.c
index e4528784f8477..fff212c0bf3b5 100644
--- a/drivers/media/dvb-frontends/mn88443x.c
+++ b/drivers/media/dvb-frontends/mn88443x.c
@@ -204,11 +204,18 @@ struct mn88443x_priv {
struct regmap *regmap_t;
};
-static void mn88443x_cmn_power_on(struct mn88443x_priv *chip)
+static int mn88443x_cmn_power_on(struct mn88443x_priv *chip)
{
+ struct device *dev = &chip->client_s->dev;
struct regmap *r_t = chip->regmap_t;
+ int ret;
- clk_prepare_enable(chip->mclk);
+ ret = clk_prepare_enable(chip->mclk);
+ if (ret) {
+ dev_err(dev, "Failed to prepare and enable mclk: %d\n",
+ ret);
+ return ret;
+ }
gpiod_set_value_cansleep(chip->reset_gpio, 1);
usleep_range(100, 1000);
@@ -222,6 +229,8 @@ static void mn88443x_cmn_power_on(struct mn88443x_priv *chip)
} else {
regmap_write(r_t, HIZSET3, 0x8f);
}
+
+ return 0;
}
static void mn88443x_cmn_power_off(struct mn88443x_priv *chip)
@@ -738,7 +747,10 @@ static int mn88443x_probe(struct i2c_client *client,
chip->fe.demodulator_priv = chip;
i2c_set_clientdata(client, chip);
- mn88443x_cmn_power_on(chip);
+ ret = mn88443x_cmn_power_on(chip);
+ if (ret)
+ goto err_i2c_t;
+
mn88443x_s_sleep(chip);
mn88443x_t_sleep(chip);
--
2.33.0
From: Peter Zijlstra <[email protected]>
[ Upstream commit 7663ad9a5dbcc27f3090e6bfd192c7e59222709f ]
RCU managed to grow a few noinstr violations:
vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x0: call to rcu_dynticks_task_trace_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0xe: call to rcu_dynticks_task_trace_exit() leaves .noinstr.text section
Fix them by adding __always_inline to the relevant trivial functions.
Also replace the noinstr with __always_inline for the existing
rcu_dynticks_task_*() functions since noinstr would force noinline
them, even when empty, which seems silly.
Fixes: 7d0c9c50c5a1 ("rcu-tasks: Avoid IPIing userspace/idle tasks if kernel is so built")
Reported-by: Stephen Rothwell <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/tree_plugin.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index c5091aeaa37bb..6ed153f226b39 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -2573,7 +2573,7 @@ static void rcu_bind_gp_kthread(void)
}
/* Record the current task on dyntick-idle entry. */
-static void noinstr rcu_dynticks_task_enter(void)
+static __always_inline void rcu_dynticks_task_enter(void)
{
#if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL)
WRITE_ONCE(current->rcu_tasks_idle_cpu, smp_processor_id());
@@ -2581,7 +2581,7 @@ static void noinstr rcu_dynticks_task_enter(void)
}
/* Record no current task on dyntick-idle exit. */
-static void noinstr rcu_dynticks_task_exit(void)
+static __always_inline void rcu_dynticks_task_exit(void)
{
#if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL)
WRITE_ONCE(current->rcu_tasks_idle_cpu, -1);
@@ -2589,7 +2589,7 @@ static void noinstr rcu_dynticks_task_exit(void)
}
/* Turn on heavyweight RCU tasks trace readers on idle/user entry. */
-static void rcu_dynticks_task_trace_enter(void)
+static __always_inline void rcu_dynticks_task_trace_enter(void)
{
#ifdef CONFIG_TASKS_TRACE_RCU
if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB))
@@ -2598,7 +2598,7 @@ static void rcu_dynticks_task_trace_enter(void)
}
/* Turn off heavyweight RCU tasks trace readers on idle/user exit. */
-static void rcu_dynticks_task_trace_exit(void)
+static __always_inline void rcu_dynticks_task_trace_exit(void)
{
#ifdef CONFIG_TASKS_TRACE_RCU
if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB))
--
2.33.0
From: Sven Schnelle <[email protected]>
[ Upstream commit 66e29fcda1824f0427966fbee2bd2c85bf362c82 ]
With idle polling, IPIs are not sent when a CPU idle, but queued
and run later from do_idle(). The default kgdb_call_nmi_hook()
implementation gets the pointer to struct pt_regs from get_irq_reqs(),
which doesn't work in that case because it was not called from the
IPI interrupt handler. Fix it by defining our own kgdb_roundup()
function which sents an IPI_ENTER_KGDB. When that IPI is received
on the target CPU kgdb_nmicallback() is called.
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/kernel/smp.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 1405b603b91b6..cf92ece20b757 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -29,6 +29,7 @@
#include <linux/bitops.h>
#include <linux/ftrace.h>
#include <linux/cpu.h>
+#include <linux/kgdb.h>
#include <linux/atomic.h>
#include <asm/current.h>
@@ -69,7 +70,10 @@ enum ipi_message_type {
IPI_CALL_FUNC,
IPI_CPU_START,
IPI_CPU_STOP,
- IPI_CPU_TEST
+ IPI_CPU_TEST,
+#ifdef CONFIG_KGDB
+ IPI_ENTER_KGDB,
+#endif
};
@@ -167,7 +171,12 @@ ipi_interrupt(int irq, void *dev_id)
case IPI_CPU_TEST:
smp_debug(100, KERN_DEBUG "CPU%d is alive!\n", this_cpu);
break;
-
+#ifdef CONFIG_KGDB
+ case IPI_ENTER_KGDB:
+ smp_debug(100, KERN_DEBUG "CPU%d ENTER_KGDB\n", this_cpu);
+ kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+ break;
+#endif
default:
printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n",
this_cpu, which);
@@ -226,6 +235,12 @@ send_IPI_allbutself(enum ipi_message_type op)
}
}
+#ifdef CONFIG_KGDB
+void kgdb_roundup_cpus(void)
+{
+ send_IPI_allbutself(IPI_ENTER_KGDB);
+}
+#endif
inline void
smp_send_stop(void) { send_IPI_allbutself(IPI_CPU_STOP); }
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit ca9b8f56ec089d3a436050afefd17b7237301f47 ]
Fix the missing clk_disable_unprepare() before return
from bcm_qspi_probe() in the error handling case.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-bcm-qspi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index b4d5930be2a95..3c0ae6dbc43e2 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1460,7 +1460,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
&qspi->dev_ids[val]);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ %s not found\n", name);
- goto qspi_probe_err;
+ goto qspi_unprepare_err;
}
qspi->dev_ids[val].dev = qspi;
@@ -1475,7 +1475,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
if (!num_ints) {
dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
ret = -EINVAL;
- goto qspi_probe_err;
+ goto qspi_unprepare_err;
}
bcm_qspi_hw_init(qspi);
@@ -1499,6 +1499,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
qspi_reg_err:
bcm_qspi_hw_uninit(qspi);
+qspi_unprepare_err:
clk_disable_unprepare(qspi->clk);
qspi_probe_err:
kfree(qspi->dev_ids);
--
2.33.0
From: Loic Poulain <[email protected]>
[ Upstream commit e6dfbc3ba90cc2b619229be56b485f085a0a8e1c ]
When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)
This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).
Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 37b53af760d76..85fe855ece097 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2610,6 +2610,10 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
if (ieee80211_is_beacon(hdr->frame_control))
ath10k_mac_handle_beacon(ar, skb);
+ if (ieee80211_is_beacon(hdr->frame_control) ||
+ ieee80211_is_probe_resp(hdr->frame_control))
+ status->boottime_ns = ktime_get_boottime_ns();
+
ath10k_dbg(ar, ATH10K_DBG_MGMT,
"event mgmt rx skb %pK len %d ftype %02x stype %02x\n",
skb, skb->len,
--
2.33.0
From: Sven Schnelle <[email protected]>
[ Upstream commit 8e0ba125c2bf1030af3267058019ba86da96863f ]
With 64 bit kernels unwind_special() is not working because
it compares the pc to the address of the function descriptor.
Add a helper function that compares pc with the dereferenced
address. This fixes all of the backtraces on my c8000. Without
this changes, a lot of backtraces are missing in kdb or the
show-all-tasks command from /proc/sysrq-trigger.
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/kernel/unwind.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c
index 87ae476d1c4f5..86a57fb0e6fae 100644
--- a/arch/parisc/kernel/unwind.c
+++ b/arch/parisc/kernel/unwind.c
@@ -21,6 +21,8 @@
#include <asm/ptrace.h>
#include <asm/unwind.h>
+#include <asm/switch_to.h>
+#include <asm/sections.h>
/* #define DEBUG 1 */
#ifdef DEBUG
@@ -203,6 +205,11 @@ int __init unwind_init(void)
return 0;
}
+static bool pc_is_kernel_fn(unsigned long pc, void *fn)
+{
+ return (unsigned long)dereference_kernel_function_descriptor(fn) == pc;
+}
+
static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int frame_size)
{
/*
@@ -221,7 +228,7 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
extern void * const _call_on_stack;
#endif /* CONFIG_IRQSTACKS */
- if (pc == (unsigned long) &handle_interruption) {
+ if (pc_is_kernel_fn(pc, handle_interruption)) {
struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN);
dbg("Unwinding through handle_interruption()\n");
info->prev_sp = regs->gr[30];
@@ -229,13 +236,13 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
return 1;
}
- if (pc == (unsigned long) &ret_from_kernel_thread ||
- pc == (unsigned long) &syscall_exit) {
+ if (pc_is_kernel_fn(pc, ret_from_kernel_thread) ||
+ pc_is_kernel_fn(pc, syscall_exit)) {
info->prev_sp = info->prev_ip = 0;
return 1;
}
- if (pc == (unsigned long) &intr_return) {
+ if (pc_is_kernel_fn(pc, intr_return)) {
struct pt_regs *regs;
dbg("Found intr_return()\n");
@@ -246,20 +253,20 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
return 1;
}
- if (pc == (unsigned long) &_switch_to_ret) {
+ if (pc_is_kernel_fn(pc, _switch_to) ||
+ pc_is_kernel_fn(pc, _switch_to_ret)) {
info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE;
info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET);
return 1;
}
#ifdef CONFIG_IRQSTACKS
- if (pc == (unsigned long) &_call_on_stack) {
+ if (pc_is_kernel_fn(pc, _call_on_stack)) {
info->prev_sp = *(unsigned long *)(info->sp - FRAME_SIZE - REG_SZ);
info->prev_ip = *(unsigned long *)(info->sp - FRAME_SIZE - RP_OFFSET);
return 1;
}
#endif
-
return 0;
}
--
2.33.0
From: Gao Xiang <[email protected]>
[ Upstream commit a0961f351d82d43ab0b845304caa235dfe249ae9 ]
syzbot reported a WARNING [1] due to corrupted compressed data.
As Dmitry said, "If this is not a kernel bug, then the code should
not use WARN. WARN if for kernel bugs and is recognized as such by
all testing systems and humans."
[1] https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Cc: Dmitry Vyukov <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Reported-by: [email protected]
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/erofs/decompressor.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/fs/erofs/decompressor.c b/fs/erofs/decompressor.c
index cbadbf55c6c20..8a6260aac26cb 100644
--- a/fs/erofs/decompressor.c
+++ b/fs/erofs/decompressor.c
@@ -170,7 +170,6 @@ static int z_erofs_lz4_decompress(struct z_erofs_decompress_req *rq, u8 *out)
erofs_err(rq->sb, "failed to decompress %d in[%u, %u] out[%u]",
ret, inlen, inputmargin, rq->outputsize);
- WARN_ON(1);
print_hex_dump(KERN_DEBUG, "[ in]: ", DUMP_PREFIX_OFFSET,
16, 1, src + inputmargin, inlen, true);
print_hex_dump(KERN_DEBUG, "[out]: ", DUMP_PREFIX_OFFSET,
--
2.33.0
From: Andrea Righi <[email protected]>
[ Upstream commit f48ad69097fe79d1de13c4d8fef556d4c11c5e68 ]
Make sure to use pclose() to properly close the pipe opened by popen().
Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrea Righi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/test_progs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index 22943b58d752a..4a13477aef9dd 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -347,7 +347,7 @@ int extract_build_id(char *build_id, size_t size)
if (getline(&line, &len, fp) == -1)
goto err;
- fclose(fp);
+ pclose(fp);
if (len > size)
len = size;
@@ -356,7 +356,7 @@ int extract_build_id(char *build_id, size_t size)
free(line);
return 0;
err:
- fclose(fp);
+ pclose(fp);
return -1;
}
--
2.33.0
From: Russell King (Oracle) <[email protected]>
[ Upstream commit fd8d9731bcdfb22d28e45bce789bcb211c868c78 ]
mvneta does not support asymetric pause modes, and it flags this by the
lack of AsymPause in the supported field. When setting pause modes, we
check that pause->rx_pause == pause->tx_pause, but only when pause
autoneg is enabled. When pause autoneg is disabled, we still allow
pause->rx_pause != pause->tx_pause, which is incorrect when the MAC
does not support asymetric pause, and causes mvneta to issue a warning.
Fix this by removing the test for pause->autoneg, so we always check
that pause->rx_pause == pause->tx_pause for network devices that do not
support AsymPause.
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/phylink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 025c3246f3396..899496f089d2e 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1610,7 +1610,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
return -EOPNOTSUPP;
if (!phylink_test(pl->supported, Asym_Pause) &&
- !pause->autoneg && pause->rx_pause != pause->tx_pause)
+ pause->rx_pause != pause->tx_pause)
return -EINVAL;
pause_state = 0;
--
2.33.0
From: Christoph Hellwig <[email protected]>
[ Upstream commit bf9c0538e485b591a2ee02d9adb8a99db4be5a2a ]
The Atari floppy driver usually autodetects the media when used with the
ormal /dev/fd? devices, which also are the only nodes created by udev.
But it also supports various aliases that force a given media format.
That is currently supported using the blk_register_region framework
which finds the floppy gendisk even for a 'mismatched' dev_t. The
problem with this (besides the code complexity) is that it creates
multiple struct block_device instances for the whole device of a
single gendisk, which can lead to interesting issues in code not
aware of that fact.
To fix this just create a separate gendisk for each of the aliases
if they are accessed.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 135 +++++++++++++++++++++++++---------------
1 file changed, 86 insertions(+), 49 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index cd612cd04767a..e6264db11e415 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -297,7 +297,7 @@ static struct atari_floppy_struct {
unsigned int wpstat; /* current state of WP signal (for
disk change detection) */
int flags; /* flags */
- struct gendisk *disk;
+ struct gendisk *disk[NUM_DISK_MINORS];
int ref;
int type;
struct blk_mq_tag_set tag_set;
@@ -720,12 +720,16 @@ static void fd_error( void )
static int do_format(int drive, int type, struct atari_format_descr *desc)
{
- struct request_queue *q = unit[drive].disk->queue;
+ struct request_queue *q;
unsigned char *p;
int sect, nsect;
unsigned long flags;
int ret;
+ if (type)
+ type--;
+
+ q = unit[drive].disk[type]->queue;
blk_mq_freeze_queue(q);
blk_mq_quiesce_queue(q);
@@ -735,7 +739,7 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
local_irq_restore(flags);
if (type) {
- if (--type >= NUM_DISK_MINORS ||
+ if (type >= NUM_DISK_MINORS ||
minor2disktype[type].drive_types > DriveType) {
ret = -EINVAL;
goto out;
@@ -1151,7 +1155,7 @@ static void fd_rwsec_done1(int status)
if (SUDT[-1].blocks > ReqBlock) {
/* try another disk type */
SUDT--;
- set_capacity(unit[SelectedDrive].disk,
+ set_capacity(unit[SelectedDrive].disk[0],
SUDT->blocks);
} else
Probing = 0;
@@ -1166,7 +1170,7 @@ static void fd_rwsec_done1(int status)
/* record not found, but not probing. Maybe stretch wrong ? Restart probing */
if (SUD.autoprobe) {
SUDT = atari_disk_type + StartDiskType[DriveType];
- set_capacity(unit[SelectedDrive].disk,
+ set_capacity(unit[SelectedDrive].disk[0],
SUDT->blocks);
Probing = 1;
}
@@ -1506,7 +1510,7 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
if (!UDT) {
Probing = 1;
UDT = atari_disk_type + StartDiskType[DriveType];
- set_capacity(floppy->disk, UDT->blocks);
+ set_capacity(bd->rq->rq_disk, UDT->blocks);
UD.autoprobe = 1;
}
}
@@ -1524,7 +1528,7 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
}
type = minor2disktype[type].index;
UDT = &atari_disk_type[type];
- set_capacity(floppy->disk, UDT->blocks);
+ set_capacity(bd->rq->rq_disk, UDT->blocks);
UD.autoprobe = 0;
}
@@ -1647,7 +1651,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
printk (KERN_INFO "floppy%d: setting %s %p!\n",
drive, dtp->name, dtp);
UDT = dtp;
- set_capacity(floppy->disk, UDT->blocks);
+ set_capacity(disk, UDT->blocks);
if (cmd == FDDEFPRM) {
/* save settings as permanent default type */
@@ -1691,7 +1695,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
return -EINVAL;
UDT = dtp;
- set_capacity(floppy->disk, UDT->blocks);
+ set_capacity(disk, UDT->blocks);
return 0;
case FDMSGON:
@@ -1714,7 +1718,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
UDT = NULL;
/* MSch: invalidate default_params */
default_params[drive].blocks = 0;
- set_capacity(floppy->disk, MAX_DISK_SIZE * 2);
+ set_capacity(disk, MAX_DISK_SIZE * 2);
fallthrough;
case FDFMTEND:
case FDFLUSH:
@@ -1950,14 +1954,50 @@ static const struct blk_mq_ops ataflop_mq_ops = {
.queue_rq = ataflop_queue_rq,
};
-static struct kobject *floppy_find(dev_t dev, int *part, void *data)
+static int ataflop_alloc_disk(unsigned int drive, unsigned int type)
{
- int drive = *part & 3;
- int type = *part >> 2;
+ struct gendisk *disk;
+ int ret;
+
+ disk = alloc_disk(1);
+ if (!disk)
+ return -ENOMEM;
+
+ disk->queue = blk_mq_init_queue(&unit[drive].tag_set);
+ if (IS_ERR(disk->queue)) {
+ ret = PTR_ERR(disk->queue);
+ disk->queue = NULL;
+ put_disk(disk);
+ return ret;
+ }
+
+ disk->major = FLOPPY_MAJOR;
+ disk->first_minor = drive + (type << 2);
+ sprintf(disk->disk_name, "fd%d", drive);
+ disk->fops = &floppy_fops;
+ disk->events = DISK_EVENT_MEDIA_CHANGE;
+ disk->private_data = &unit[drive];
+ set_capacity(disk, MAX_DISK_SIZE * 2);
+
+ unit[drive].disk[type] = disk;
+ return 0;
+}
+
+static DEFINE_MUTEX(ataflop_probe_lock);
+
+static void ataflop_probe(dev_t dev)
+{
+ int drive = MINOR(dev) & 3;
+ int type = MINOR(dev) >> 2;
+
if (drive >= FD_MAX_UNITS || type > NUM_DISK_MINORS)
- return NULL;
- *part = 0;
- return get_disk_and_module(unit[drive].disk);
+ return;
+ mutex_lock(&ataflop_probe_lock);
+ if (!unit[drive].disk[type]) {
+ if (ataflop_alloc_disk(drive, type) == 0)
+ add_disk(unit[drive].disk[type]);
+ }
+ mutex_unlock(&ataflop_probe_lock);
}
static int __init atari_floppy_init (void)
@@ -1969,23 +2009,26 @@ static int __init atari_floppy_init (void)
/* Amiga, Mac, ... don't have Atari-compatible floppy :-) */
return -ENODEV;
- if (register_blkdev(FLOPPY_MAJOR,"fd"))
- return -EBUSY;
+ mutex_lock(&ataflop_probe_lock);
+ ret = __register_blkdev(FLOPPY_MAJOR, "fd", ataflop_probe);
+ if (ret)
+ goto out_unlock;
for (i = 0; i < FD_MAX_UNITS; i++) {
- unit[i].disk = alloc_disk(1);
- if (!unit[i].disk) {
- ret = -ENOMEM;
+ memset(&unit[i].tag_set, 0, sizeof(unit[i].tag_set));
+ unit[i].tag_set.ops = &ataflop_mq_ops;
+ unit[i].tag_set.nr_hw_queues = 1;
+ unit[i].tag_set.nr_maps = 1;
+ unit[i].tag_set.queue_depth = 2;
+ unit[i].tag_set.numa_node = NUMA_NO_NODE;
+ unit[i].tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
+ ret = blk_mq_alloc_tag_set(&unit[i].tag_set);
+ if (ret)
goto err;
- }
- unit[i].disk->queue = blk_mq_init_sq_queue(&unit[i].tag_set,
- &ataflop_mq_ops, 2,
- BLK_MQ_F_SHOULD_MERGE);
- if (IS_ERR(unit[i].disk->queue)) {
- put_disk(unit[i].disk);
- ret = PTR_ERR(unit[i].disk->queue);
- unit[i].disk->queue = NULL;
+ ret = ataflop_alloc_disk(i, 0);
+ if (ret) {
+ blk_mq_free_tag_set(&unit[i].tag_set);
goto err;
}
}
@@ -2015,19 +2058,9 @@ static int __init atari_floppy_init (void)
for (i = 0; i < FD_MAX_UNITS; i++) {
unit[i].track = -1;
unit[i].flags = 0;
- unit[i].disk->major = FLOPPY_MAJOR;
- unit[i].disk->first_minor = i;
- sprintf(unit[i].disk->disk_name, "fd%d", i);
- unit[i].disk->fops = &floppy_fops;
- unit[i].disk->events = DISK_EVENT_MEDIA_CHANGE;
- unit[i].disk->private_data = &unit[i];
- set_capacity(unit[i].disk, MAX_DISK_SIZE * 2);
- add_disk(unit[i].disk);
+ add_disk(unit[i].disk[0]);
}
- blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE,
- floppy_find, NULL, NULL);
-
printk(KERN_INFO "Atari floppy driver: max. %cD, %strack buffering\n",
DriveType == 0 ? 'D' : DriveType == 1 ? 'H' : 'E',
UseTrackbuffer ? "" : "no ");
@@ -2037,14 +2070,14 @@ static int __init atari_floppy_init (void)
err:
while (--i >= 0) {
- struct gendisk *disk = unit[i].disk;
-
- blk_cleanup_queue(disk->queue);
+ blk_cleanup_queue(unit[i].disk[0]->queue);
+ put_disk(unit[i].disk[0]);
blk_mq_free_tag_set(&unit[i].tag_set);
- put_disk(unit[i].disk);
}
unregister_blkdev(FLOPPY_MAJOR, "fd");
+out_unlock:
+ mutex_unlock(&ataflop_probe_lock);
return ret;
}
@@ -2089,13 +2122,17 @@ __setup("floppy=", atari_floppy_setup);
static void __exit atari_floppy_exit(void)
{
- int i;
- blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
+ int i, type;
+
for (i = 0; i < FD_MAX_UNITS; i++) {
- del_gendisk(unit[i].disk);
- blk_cleanup_queue(unit[i].disk->queue);
+ for (type = 0; type < NUM_DISK_MINORS; type++) {
+ if (!unit[i].disk[type])
+ continue;
+ del_gendisk(unit[i].disk[type]);
+ blk_cleanup_queue(unit[i].disk[type]->queue);
+ put_disk(unit[i].disk[type]);
+ }
blk_mq_free_tag_set(&unit[i].tag_set);
- put_disk(unit[i].disk);
}
unregister_blkdev(FLOPPY_MAJOR, "fd");
--
2.33.0
From: Wang Hai <[email protected]>
[ Upstream commit d549107305b4634c81223a853701c06bcf657bc3 ]
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff88810a2ddc00 (size 512):
comm "kworker/6:1", pid 176, jiffies 4295009893 (age 757.220s)
hex dump (first 32 bytes):
00 50 05 18 81 88 ff ff 00 00 00 00 00 00 00 00 .P..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
[<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
[<ffffffffa02a1530>] if_usb_probe+0x60/0x37c [libertas_tf_usb]
[<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
[<ffffffff82b59630>] really_probe+0x190/0x480
[<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180
[<ffffffff82b59af3>] driver_probe_device+0x53/0x130
[<ffffffff82b5a075>] __device_attach_driver+0x105/0x130
[<ffffffff82b55949>] bus_for_each_drv+0x129/0x190
[<ffffffff82b593c9>] __device_attach+0x1c9/0x270
[<ffffffff82b5a250>] device_initial_probe+0x20/0x30
[<ffffffff82b579c2>] bus_probe_device+0x142/0x160
[<ffffffff82b52e49>] device_add+0x829/0x1300
[<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore]
[<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore]
[<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore]
cardp is missing being freed in the error handling path of the probe
and the path of the disconnect, which will cause memory leak.
This patch adds the missing kfree().
Fixes: c305a19a0d0a ("libertas_tf: usb specific functions")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/libertas_tf/if_usb.c b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
index a92916dc81a96..ecce8b56f8a28 100644
--- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
@@ -230,6 +230,7 @@ static int if_usb_probe(struct usb_interface *intf,
dealloc:
if_usb_free(cardp);
+ kfree(cardp);
error:
lbtf_deb_leave(LBTF_DEB_MAIN);
return -ENOMEM;
@@ -254,6 +255,7 @@ static void if_usb_disconnect(struct usb_interface *intf)
/* Unlink and free urb */
if_usb_free(cardp);
+ kfree(cardp);
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
--
2.33.0
From: Sean Young <[email protected]>
[ Upstream commit febfe985fc2ea052a363f6525ff624b8efd5273c ]
commit f0c15b360fb6 ("media: ir_toy: prevent device from hanging during
transmit") removed a cpu_to_be16() cast, which causes a sparse warning.
Fixes: f0c15b360fb6 ("media: ir_toy: prevent device from hanging during transmit")
Reported-by: Hans Verkuil <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/ir_toy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/rc/ir_toy.c b/drivers/media/rc/ir_toy.c
index 48d52baec1a1c..1aa7989e756cc 100644
--- a/drivers/media/rc/ir_toy.c
+++ b/drivers/media/rc/ir_toy.c
@@ -310,7 +310,7 @@ static int irtoy_tx(struct rc_dev *rc, uint *txbuf, uint count)
buf[i] = cpu_to_be16(v);
}
- buf[count] = 0xffff;
+ buf[count] = cpu_to_be16(0xffff);
irtoy->tx_buf = buf;
irtoy->tx_len = size;
--
2.33.0
From: Tiezhu Yang <[email protected]>
[ Upstream commit f76fbbbb5061fe14824ba5807c44bd7400a6b4e1 ]
Use the actual return value instead of always -1 if register_kretprobe()
failed.
E.g. without this patch:
# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Operation not permitted
With this patch:
# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Unknown symbol in module
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 804defea1c02 ("Kprobes: move kprobe examples to samples/")
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
samples/kprobes/kretprobe_example.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/samples/kprobes/kretprobe_example.c b/samples/kprobes/kretprobe_example.c
index 5dc1bf3baa98b..228321ecb1616 100644
--- a/samples/kprobes/kretprobe_example.c
+++ b/samples/kprobes/kretprobe_example.c
@@ -86,7 +86,7 @@ static int __init kretprobe_init(void)
ret = register_kretprobe(&my_kretprobe);
if (ret < 0) {
pr_err("register_kretprobe failed, returned %d\n", ret);
- return -1;
+ return ret;
}
pr_info("Planted return probe at %s: %p\n",
my_kretprobe.kp.symbol_name, my_kretprobe.kp.addr);
--
2.33.0
From: Wang Hai <[email protected]>
[ Upstream commit 9692151e2fe7a326bafe99836fd1f20a2cc3a049 ]
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff88812c7d7400 (size 512):
comm "kworker/6:1", pid 176, jiffies 4295003332 (age 822.830s)
hex dump (first 32 bytes):
00 68 1e 04 81 88 ff ff 01 00 00 00 00 00 00 00 .h..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
[<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
[<ffffffffa02c9873>] if_usb_probe+0x63/0x446 [usb8xxx]
[<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
[<ffffffff82b59630>] really_probe+0x190/0x480
[<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180
[<ffffffff82b59af3>] driver_probe_device+0x53/0x130
[<ffffffff82b5a075>] __device_attach_driver+0x105/0x130
[<ffffffff82b55949>] bus_for_each_drv+0x129/0x190
[<ffffffff82b593c9>] __device_attach+0x1c9/0x270
[<ffffffff82b5a250>] device_initial_probe+0x20/0x30
[<ffffffff82b579c2>] bus_probe_device+0x142/0x160
[<ffffffff82b52e49>] device_add+0x829/0x1300
[<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore]
[<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore]
[<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore]
cardp is missing being freed in the error handling path of the probe
and the path of the disconnect, which will cause memory leak.
This patch adds the missing kfree().
Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/libertas/if_usb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/libertas/if_usb.c b/drivers/net/wireless/marvell/libertas/if_usb.c
index 20436a289d5cd..5d6dc1dd050d4 100644
--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -292,6 +292,7 @@ err_add_card:
if_usb_reset_device(cardp);
dealloc:
if_usb_free(cardp);
+ kfree(cardp);
error:
return r;
@@ -316,6 +317,7 @@ static void if_usb_disconnect(struct usb_interface *intf)
/* Unlink and free urb */
if_usb_free(cardp);
+ kfree(cardp);
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
--
2.33.0
From: Mark Rutland <[email protected]>
[ Upstream commit c65b52d02f6c1a06ddb20cba175ad49eccd6410d ]
As bcm6345_l1_irq_handle() is a chained irqchip handler, it will be
invoked within the context of the root irqchip handler, which must have
entered IRQ context already.
When bcm6345_l1_irq_handle() calls arch/mips's do_IRQ() , this will nest
another call to irq_enter(), and the resulting nested increment to
`rcu_data.dynticks_nmi_nesting` will cause rcu_is_cpu_rrupt_from_idle()
to fail to identify wakeups from idle, resulting in failure to preempt,
and RCU stalls.
Chained irqchip handlers must invoke IRQ handlers by way of thee core
irqchip code, i.e. generic_handle_irq() or generic_handle_domain_irq()
and should not call do_IRQ(), which is intended only for root irqchip
handlers.
Fix bcm6345_l1_irq_handle() by calling generic_handle_irq() directly.
Fixes: c7c42ec2baa1de7a ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-bcm6345-l1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-bcm6345-l1.c b/drivers/irqchip/irq-bcm6345-l1.c
index e3483789f4df3..1bd0621c4ce2a 100644
--- a/drivers/irqchip/irq-bcm6345-l1.c
+++ b/drivers/irqchip/irq-bcm6345-l1.c
@@ -140,7 +140,7 @@ static void bcm6345_l1_irq_handle(struct irq_desc *desc)
for_each_set_bit(hwirq, &pending, IRQS_PER_WORD) {
irq = irq_linear_revmap(intc->domain, base + hwirq);
if (irq)
- do_IRQ(irq);
+ generic_handle_irq(irq);
else
spurious_interrupt();
}
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit ada61aa0b1184a8fda1a89a340c7d6cc4e59aee5 ]
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888102740438 (size 8):
comm "27", pid 859, jiffies 4295031351 (age 143.992s)
hex dump (first 8 bytes):
68 77 6d 6f 6e 30 00 00 hwmon0..
backtrace:
[<00000000544b5996>] __kmalloc_track_caller+0x1a6/0x300
[<00000000df0d62b9>] kvasprintf+0xad/0x140
[<00000000d3d2a3da>] kvasprintf_const+0x62/0x190
[<000000005f8f0f29>] kobject_set_name_vargs+0x56/0x140
[<00000000b739e4b9>] dev_set_name+0xb0/0xe0
[<0000000095b69c25>] __hwmon_device_register+0xf19/0x1e50 [hwmon]
[<00000000a7e65b52>] hwmon_device_register_with_info+0xcb/0x110 [hwmon]
[<000000006f181e86>] devm_hwmon_device_register_with_info+0x85/0x100 [hwmon]
[<0000000081bdc567>] tmp421_probe+0x2d2/0x465 [tmp421]
[<00000000502cc3f8>] i2c_device_probe+0x4e1/0xbb0
[<00000000f90bda3b>] really_probe+0x285/0xc30
[<000000007eac7b77>] __driver_probe_device+0x35f/0x4f0
[<000000004953d43d>] driver_probe_device+0x4f/0x140
[<000000002ada2d41>] __device_attach_driver+0x24c/0x330
[<00000000b3977977>] bus_for_each_drv+0x15d/0x1e0
[<000000005bf2a8e3>] __device_attach+0x267/0x410
When device_register() returns an error, the name allocated in
dev_set_name() will be leaked, the put_device() should be used
instead of calling hwmon_dev_release() to give up the device
reference, then the name will be freed in kobject_cleanup().
Reported-by: Hulk Robot <[email protected]>
Fixes: bab2243ce189 ("hwmon: Introduce hwmon_device_register_with_groups")
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/hwmon.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 6c684058bfdfc..e5a83f7492677 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -760,8 +760,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
dev_set_drvdata(hdev, drvdata);
dev_set_name(hdev, HWMON_ID_FORMAT, id);
err = device_register(hdev);
- if (err)
- goto free_hwmon;
+ if (err) {
+ put_device(hdev);
+ goto ida_remove;
+ }
INIT_LIST_HEAD(&hwdev->tzdata);
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit ce5f6c2c9b0fcb4094f8e162cfd37fb4294204f7 ]
The 'reg_vmmc' regulator is enabled in the probe. It is never disabled.
Neither in the error handling path of the probe nor in the remove
function.
Register a devm_action to disable it when needed.
Fixes: 4dc5a79f1350 ("mmc: mxs-mmc: enable regulator for mmc slot")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/4aadb3c97835f7b80f00819c3d549e6130384e67.1634365151.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/mxs-mmc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 4fbbff03137c3..2ec3eb651d6b5 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -565,6 +565,11 @@ static const struct of_device_id mxs_mmc_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
+static void mxs_mmc_regulator_disable(void *regulator)
+{
+ regulator_disable(regulator);
+}
+
static int mxs_mmc_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
@@ -606,6 +611,11 @@ static int mxs_mmc_probe(struct platform_device *pdev)
"Failed to enable vmmc regulator: %d\n", ret);
goto out_mmc_free;
}
+
+ ret = devm_add_action_or_reset(&pdev->dev, mxs_mmc_regulator_disable,
+ reg_vmmc);
+ if (ret)
+ goto out_mmc_free;
}
ssp->clk = devm_clk_get(&pdev->dev, NULL);
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 2203bd0e5c12ffc53ffdd4fbd7b12d6ba27e0424 ]
The msm_gem_new_impl() function cleans up after itself so there is no
need to call drm_gem_object_put(). Conceptually, it does not make sense
to call a kref_put() function until after the reference counting has
been initialized which happens immediately after this call in the
drm_gem_(private_)object_init() functions.
In the msm_gem_import() function the "obj" pointer is uninitialized, so
it will lead to a crash.
Fixes: 05b849111c07 ("drm/msm: prime support")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20211013081315.GG6010@kili
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_gem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c
index 04be4cfcccc18..819567e40565c 100644
--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -1061,7 +1061,7 @@ static struct drm_gem_object *_msm_gem_new(struct drm_device *dev,
ret = msm_gem_new_impl(dev, size, flags, &obj);
if (ret)
- goto fail;
+ return ERR_PTR(ret);
msm_obj = to_msm_bo(obj);
@@ -1149,7 +1149,7 @@ struct drm_gem_object *msm_gem_import(struct drm_device *dev,
ret = msm_gem_new_impl(dev, size, MSM_BO_WC, &obj);
if (ret)
- goto fail;
+ return ERR_PTR(ret);
drm_gem_private_object_init(dev, obj, size);
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit 19757cebf0c5016a1f36f7fe9810a9f0b33c0832 ]
Use of percpu_counter structure to track count of orphaned
sockets is causing problems on modern hosts with 256 cpus
or more.
Stefan Bach reported a serious spinlock contention in real workloads,
that I was able to reproduce with a netfilter rule dropping
incoming FIN packets.
53.56% server [kernel.kallsyms] [k] queued_spin_lock_slowpath
|
---queued_spin_lock_slowpath
|
--53.51%--_raw_spin_lock_irqsave
|
--53.51%--__percpu_counter_sum
tcp_check_oom
|
|--39.03%--__tcp_close
| tcp_close
| inet_release
| inet6_release
| sock_close
| __fput
| ____fput
| task_work_run
| exit_to_usermode_loop
| do_syscall_64
| entry_SYSCALL_64_after_hwframe
| __GI___libc_close
|
--14.48%--tcp_out_of_resources
tcp_write_timeout
tcp_retransmit_timer
tcp_write_timer_handler
tcp_write_timer
call_timer_fn
expire_timers
__run_timers
run_timer_softirq
__softirqentry_text_start
As explained in commit cf86a086a180 ("net/dst: use a smaller percpu_counter
batch for dst entries accounting"), default batch size is too big
for the default value of tcp_max_orphans (262144).
But even if we reduce batch sizes, there would still be cases
where the estimated count of orphans is beyond the limit,
and where tcp_too_many_orphans() has to call the expensive
percpu_counter_sum_positive().
One solution is to use plain per-cpu counters, and have
a timer to periodically refresh this cache.
Updating this cache every 100ms seems about right, tcp pressure
state is not radically changing over shorter periods.
percpu_counter was nice 15 years ago while hosts had less
than 16 cpus, not anymore by current standards.
v2: Fix the build issue for CONFIG_CRYPTO_DEV_CHELSIO_TLS=m,
reported by kernel test robot <[email protected]>
Remove unused socket argument from tcp_too_many_orphans()
Fixes: dd24c00191d5 ("net: Use a percpu_counter for orphan_count")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Stefan Bach <[email protected]>
Cc: Neal Cardwell <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../chelsio/inline_crypto/chtls/chtls_cm.c | 2 +-
.../chelsio/inline_crypto/chtls/chtls_cm.h | 2 +-
include/net/inet_connection_sock.h | 2 +-
include/net/sock.h | 2 +-
include/net/tcp.h | 17 ++-------
net/dccp/dccp.h | 2 +-
net/dccp/proto.c | 14 ++-----
net/ipv4/inet_connection_sock.c | 4 +-
net/ipv4/inet_hashtables.c | 2 +-
net/ipv4/proc.c | 2 +-
net/ipv4/tcp.c | 38 ++++++++++++++++---
11 files changed, 49 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
index a262c949ed76b..d6b6ebb3f1ec7 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
+++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
@@ -870,7 +870,7 @@ static void do_abort_syn_rcv(struct sock *child, struct sock *parent)
* created only after 3 way handshake is done.
*/
sock_orphan(child);
- percpu_counter_inc((child)->sk_prot->orphan_count);
+ INC_ORPHAN_COUNT(child);
chtls_release_resources(child);
chtls_conn_done(child);
} else {
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.h b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.h
index b1161bdeda4dc..f61ca657601ca 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.h
+++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.h
@@ -95,7 +95,7 @@ struct deferred_skb_cb {
#define WSCALE_OK(tp) ((tp)->rx_opt.wscale_ok)
#define TSTAMP_OK(tp) ((tp)->rx_opt.tstamp_ok)
#define SACK_OK(tp) ((tp)->rx_opt.sack_ok)
-#define INC_ORPHAN_COUNT(sk) percpu_counter_inc((sk)->sk_prot->orphan_count)
+#define INC_ORPHAN_COUNT(sk) this_cpu_inc(*(sk)->sk_prot->orphan_count)
/* TLS SKB */
#define skb_ulp_tls_inline(skb) (ULP_SKB_CB(skb)->ulp.tls.ofld)
diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
index aa92af3dd444d..0b1864a82d4ad 100644
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -291,7 +291,7 @@ static inline void inet_csk_prepare_for_destroy_sock(struct sock *sk)
{
/* The below has to be done to allow calling inet_csk_destroy_sock */
sock_set_flag(sk, SOCK_DEAD);
- percpu_counter_inc(sk->sk_prot->orphan_count);
+ this_cpu_inc(*sk->sk_prot->orphan_count);
}
void inet_csk_destroy_sock(struct sock *sk);
diff --git a/include/net/sock.h b/include/net/sock.h
index cdca984f36305..6270d1d9436b0 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1214,7 +1214,7 @@ struct proto {
unsigned int useroffset; /* Usercopy region offset */
unsigned int usersize; /* Usercopy region size */
- struct percpu_counter *orphan_count;
+ unsigned int __percpu *orphan_count;
struct request_sock_ops *rsk_prot;
struct timewait_sock_ops *twsk_prot;
diff --git a/include/net/tcp.h b/include/net/tcp.h
index eff611da5780b..334b8d1b54429 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -48,7 +48,9 @@
extern struct inet_hashinfo tcp_hashinfo;
-extern struct percpu_counter tcp_orphan_count;
+DECLARE_PER_CPU(unsigned int, tcp_orphan_count);
+int tcp_orphan_count_sum(void);
+
void tcp_time_wait(struct sock *sk, int state, int timeo);
#define MAX_TCP_HEADER L1_CACHE_ALIGN(128 + MAX_HEADER)
@@ -290,19 +292,6 @@ static inline bool tcp_out_of_memory(struct sock *sk)
void sk_forced_mem_schedule(struct sock *sk, int size);
-static inline bool tcp_too_many_orphans(struct sock *sk, int shift)
-{
- struct percpu_counter *ocp = sk->sk_prot->orphan_count;
- int orphans = percpu_counter_read_positive(ocp);
-
- if (orphans << shift > sysctl_tcp_max_orphans) {
- orphans = percpu_counter_sum_positive(ocp);
- if (orphans << shift > sysctl_tcp_max_orphans)
- return true;
- }
- return false;
-}
-
bool tcp_check_oom(struct sock *sk, int shift);
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index c5c1d2b8045e8..5183e627468d8 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -48,7 +48,7 @@ extern bool dccp_debug;
extern struct inet_hashinfo dccp_hashinfo;
-extern struct percpu_counter dccp_orphan_count;
+DECLARE_PER_CPU(unsigned int, dccp_orphan_count);
void dccp_time_wait(struct sock *sk, int state, int timeo);
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 6d705d90c6149..548cf0135647d 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -42,8 +42,8 @@ DEFINE_SNMP_STAT(struct dccp_mib, dccp_statistics) __read_mostly;
EXPORT_SYMBOL_GPL(dccp_statistics);
-struct percpu_counter dccp_orphan_count;
-EXPORT_SYMBOL_GPL(dccp_orphan_count);
+DEFINE_PER_CPU(unsigned int, dccp_orphan_count);
+EXPORT_PER_CPU_SYMBOL_GPL(dccp_orphan_count);
struct inet_hashinfo dccp_hashinfo;
EXPORT_SYMBOL_GPL(dccp_hashinfo);
@@ -1055,7 +1055,7 @@ adjudge_to_death:
bh_lock_sock(sk);
WARN_ON(sock_owned_by_user(sk));
- percpu_counter_inc(sk->sk_prot->orphan_count);
+ this_cpu_inc(dccp_orphan_count);
/* Have we already been destroyed by a softirq or backlog? */
if (state != DCCP_CLOSED && sk->sk_state == DCCP_CLOSED)
@@ -1115,13 +1115,10 @@ static int __init dccp_init(void)
BUILD_BUG_ON(sizeof(struct dccp_skb_cb) >
sizeof_field(struct sk_buff, cb));
- rc = percpu_counter_init(&dccp_orphan_count, 0, GFP_KERNEL);
- if (rc)
- goto out_fail;
inet_hashinfo_init(&dccp_hashinfo);
rc = inet_hashinfo2_init_mod(&dccp_hashinfo);
if (rc)
- goto out_free_percpu;
+ goto out_fail;
rc = -ENOBUFS;
dccp_hashinfo.bind_bucket_cachep =
kmem_cache_create("dccp_bind_bucket",
@@ -1226,8 +1223,6 @@ out_free_bind_bucket_cachep:
kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
out_free_hashinfo2:
inet_hashinfo2_free_mod(&dccp_hashinfo);
-out_free_percpu:
- percpu_counter_destroy(&dccp_orphan_count);
out_fail:
dccp_hashinfo.bhash = NULL;
dccp_hashinfo.ehash = NULL;
@@ -1250,7 +1245,6 @@ static void __exit dccp_fini(void)
dccp_ackvec_exit();
dccp_sysctl_exit();
inet_hashinfo2_free_mod(&dccp_hashinfo);
- percpu_counter_destroy(&dccp_orphan_count);
}
module_init(dccp_init);
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 1dfa561e8f981..addd595bb3fe6 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -892,7 +892,7 @@ void inet_csk_destroy_sock(struct sock *sk)
sk_refcnt_debug_release(sk);
- percpu_counter_dec(sk->sk_prot->orphan_count);
+ this_cpu_dec(*sk->sk_prot->orphan_count);
sock_put(sk);
}
@@ -951,7 +951,7 @@ static void inet_child_forget(struct sock *sk, struct request_sock *req,
sock_orphan(child);
- percpu_counter_inc(sk->sk_prot->orphan_count);
+ this_cpu_inc(*sk->sk_prot->orphan_count);
if (sk->sk_protocol == IPPROTO_TCP && tcp_rsk(req)->tfo_listener) {
BUG_ON(rcu_access_pointer(tcp_sk(child)->fastopen_rsk) != req);
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index f3fd5c911ed09..e093847c334da 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -598,7 +598,7 @@ bool inet_ehash_nolisten(struct sock *sk, struct sock *osk, bool *found_dup_sk)
if (ok) {
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
} else {
- percpu_counter_inc(sk->sk_prot->orphan_count);
+ this_cpu_inc(*sk->sk_prot->orphan_count);
inet_sk_set_state(sk, TCP_CLOSE);
sock_set_flag(sk, SOCK_DEAD);
inet_csk_destroy_sock(sk);
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 8d5e1695b9aa8..80d13d8f982dc 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -53,7 +53,7 @@ static int sockstat_seq_show(struct seq_file *seq, void *v)
struct net *net = seq->private;
int orphans, sockets;
- orphans = percpu_counter_sum_positive(&tcp_orphan_count);
+ orphans = tcp_orphan_count_sum();
sockets = proto_sockets_allocated_sum_positive(&tcp_prot);
socket_seq_show(seq);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 54230852e5f95..65eb0a523e3f5 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -280,8 +280,8 @@
#include <asm/ioctls.h>
#include <net/busy_poll.h>
-struct percpu_counter tcp_orphan_count;
-EXPORT_SYMBOL_GPL(tcp_orphan_count);
+DEFINE_PER_CPU(unsigned int, tcp_orphan_count);
+EXPORT_PER_CPU_SYMBOL_GPL(tcp_orphan_count);
long sysctl_tcp_mem[3] __read_mostly;
EXPORT_SYMBOL(sysctl_tcp_mem);
@@ -2394,11 +2394,36 @@ void tcp_shutdown(struct sock *sk, int how)
}
EXPORT_SYMBOL(tcp_shutdown);
+int tcp_orphan_count_sum(void)
+{
+ int i, total = 0;
+
+ for_each_possible_cpu(i)
+ total += per_cpu(tcp_orphan_count, i);
+
+ return max(total, 0);
+}
+
+static int tcp_orphan_cache;
+static struct timer_list tcp_orphan_timer;
+#define TCP_ORPHAN_TIMER_PERIOD msecs_to_jiffies(100)
+
+static void tcp_orphan_update(struct timer_list *unused)
+{
+ WRITE_ONCE(tcp_orphan_cache, tcp_orphan_count_sum());
+ mod_timer(&tcp_orphan_timer, jiffies + TCP_ORPHAN_TIMER_PERIOD);
+}
+
+static bool tcp_too_many_orphans(int shift)
+{
+ return READ_ONCE(tcp_orphan_cache) << shift > sysctl_tcp_max_orphans;
+}
+
bool tcp_check_oom(struct sock *sk, int shift)
{
bool too_many_orphans, out_of_socket_memory;
- too_many_orphans = tcp_too_many_orphans(sk, shift);
+ too_many_orphans = tcp_too_many_orphans(shift);
out_of_socket_memory = tcp_out_of_memory(sk);
if (too_many_orphans)
@@ -2508,7 +2533,7 @@ adjudge_to_death:
/* remove backlog if any, without releasing ownership. */
__release_sock(sk);
- percpu_counter_inc(sk->sk_prot->orphan_count);
+ this_cpu_inc(tcp_orphan_count);
/* Have we already been destroyed by a softirq or backlog? */
if (state != TCP_CLOSE && sk->sk_state == TCP_CLOSE)
@@ -4145,7 +4170,10 @@ void __init tcp_init(void)
sizeof_field(struct sk_buff, cb));
percpu_counter_init(&tcp_sockets_allocated, 0, GFP_KERNEL);
- percpu_counter_init(&tcp_orphan_count, 0, GFP_KERNEL);
+
+ timer_setup(&tcp_orphan_timer, tcp_orphan_update, TIMER_DEFERRABLE);
+ mod_timer(&tcp_orphan_timer, jiffies + TCP_ORPHAN_TIMER_PERIOD);
+
inet_hashinfo_init(&tcp_hashinfo);
inet_hashinfo2_init(&tcp_hashinfo, "tcp_listen_portaddr_hash",
thash_entries, 21, /* one slot per 2 MB*/
--
2.33.0
From: David Hildenbrand <[email protected]>
[ Upstream commit b159f94c86b43cf7e73e654bc527255b1f4eafc4 ]
... otherwise we will try unlocking a spinlock that was never locked via a
garbage pointer.
At the time we reach this code path, we usually successfully looked up
a PGSTE already; however, evil user space could have manipulated the VMA
layout in the meantime and triggered removal of the page table.
Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c")
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Claudio Imbrenda <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/mm/gmap.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index 64795d0349263..f2d19d40272cf 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -684,9 +684,10 @@ void __gmap_zap(struct gmap *gmap, unsigned long gaddr)
vmaddr |= gaddr & ~PMD_MASK;
/* Get pointer to the page table entry */
ptep = get_locked_pte(gmap->mm, vmaddr, &ptl);
- if (likely(ptep))
+ if (likely(ptep)) {
ptep_zap_unused(gmap->mm, vmaddr, ptep, 0);
- pte_unmap_unlock(ptep, ptl);
+ pte_unmap_unlock(ptep, ptl);
+ }
}
}
EXPORT_SYMBOL_GPL(__gmap_zap);
--
2.33.0
From: Shayne Chen <[email protected]>
[ Upstream commit 161cc13912d3c3e8857001988dfba39be842454a ]
For broadcast/multicast wcid, the muar_idx should be 0xe.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 63bc4577c5c57..7b6e9a5352b35 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -631,7 +631,7 @@ mt7915_mcu_alloc_sta_req(struct mt7915_dev *dev, struct mt7915_vif *mvif,
.bss_idx = mvif->idx,
.wlan_idx_lo = msta ? to_wcid_lo(msta->wcid.idx) : 0,
.wlan_idx_hi = msta ? to_wcid_hi(msta->wcid.idx) : 0,
- .muar_idx = msta ? mvif->omac_idx : 0,
+ .muar_idx = msta && msta->wcid.sta ? mvif->omac_idx : 0xe,
.is_tlv_append = 1,
};
struct sk_buff *skb;
--
2.33.0
From: Shayne Chen <[email protected]>
[ Upstream commit afa0370f3a3a64af6d368da0bedd72ab2a026cd0 ]
Fix tag len error for sta_rec_wtbl, which causes fw parsing error for
the tags placed behind it.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index c36c7b0e918a4..63bc4577c5c57 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -667,7 +667,7 @@ mt7915_mcu_alloc_wtbl_req(struct mt7915_dev *dev, struct mt7915_sta *msta,
}
if (sta_hdr)
- sta_hdr->len = cpu_to_le16(sizeof(hdr));
+ le16_add_cpu(&sta_hdr->len, sizeof(hdr));
return skb_put_data(nskb, &hdr, sizeof(hdr));
}
--
2.33.0
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit e500c9470e26be66eb2bc6de773ae9091149118a ]
Fix possible infinite loop in mt7915_load_patch if
mt7915_mcu_patch_sem_ctrl always returns an error.
Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 7c2d09a64882e..c36c7b0e918a4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2648,7 +2648,7 @@ out:
default:
ret = -EAGAIN;
dev_err(dev->mt76.dev, "Failed to release patch semaphore\n");
- goto out;
+ break;
}
release_firmware(fw);
--
2.33.0
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit c33edef520213feccebc22c9474c685b9fb60611 ]
Fix the following sparse warning in mt76x02_mac_write_txwi and
mt76x02_mac_tx_rate_val routines:
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:237:19:
warning: restricted __le16 degrades to intege
warning: cast from restricted __le16
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:383:28:
warning: incorrect type in assignment (different base types)
expected restricted __le16 [usertype] rate
got unsigned long
Fixes: db9f11d3433f7 ("mt76: store wcid tx rate info in one u32 reduce locking")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
index da6d3f51f6d47..677082d8659a6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
@@ -176,7 +176,7 @@ void mt76x02_mac_wcid_set_drop(struct mt76x02_dev *dev, u8 idx, bool drop)
mt76_wr(dev, MT_WCID_DROP(idx), (val & ~bit) | (bit * drop));
}
-static __le16
+static u16
mt76x02_mac_tx_rate_val(struct mt76x02_dev *dev,
const struct ieee80211_tx_rate *rate, u8 *nss_val)
{
@@ -222,14 +222,14 @@ mt76x02_mac_tx_rate_val(struct mt76x02_dev *dev,
rateval |= MT_RXWI_RATE_SGI;
*nss_val = nss;
- return cpu_to_le16(rateval);
+ return rateval;
}
void mt76x02_mac_wcid_set_rate(struct mt76x02_dev *dev, struct mt76_wcid *wcid,
const struct ieee80211_tx_rate *rate)
{
s8 max_txpwr_adj = mt76x02_tx_get_max_txpwr_adj(dev, rate);
- __le16 rateval;
+ u16 rateval;
u32 tx_info;
s8 nss;
@@ -342,7 +342,7 @@ void mt76x02_mac_write_txwi(struct mt76x02_dev *dev, struct mt76x02_txwi *txwi,
struct ieee80211_key_conf *key = info->control.hw_key;
u32 wcid_tx_info;
u16 rate_ht_mask = FIELD_PREP(MT_RXWI_RATE_PHY, BIT(1) | BIT(2));
- u16 txwi_flags = 0;
+ u16 txwi_flags = 0, rateval;
u8 nss;
s8 txpwr_adj, max_txpwr_adj;
u8 ccmp_pn[8], nstreams = dev->chainmask & 0xf;
@@ -380,14 +380,15 @@ void mt76x02_mac_write_txwi(struct mt76x02_dev *dev, struct mt76x02_txwi *txwi,
if (wcid && (rate->idx < 0 || !rate->count)) {
wcid_tx_info = wcid->tx_info;
- txwi->rate = FIELD_GET(MT_WCID_TX_INFO_RATE, wcid_tx_info);
+ rateval = FIELD_GET(MT_WCID_TX_INFO_RATE, wcid_tx_info);
max_txpwr_adj = FIELD_GET(MT_WCID_TX_INFO_TXPWR_ADJ,
wcid_tx_info);
nss = FIELD_GET(MT_WCID_TX_INFO_NSS, wcid_tx_info);
} else {
- txwi->rate = mt76x02_mac_tx_rate_val(dev, rate, &nss);
+ rateval = mt76x02_mac_tx_rate_val(dev, rate, &nss);
max_txpwr_adj = mt76x02_tx_get_max_txpwr_adj(dev, rate);
}
+ txwi->rate = cpu_to_le16(rateval);
txpwr_adj = mt76x02_tx_get_txpwr_adj(dev, dev->txpower_conf,
max_txpwr_adj);
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 9b793db5fca44d01f72d3564a168171acf7c4076 ]
The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.
This means that "start" becomes a very high positive value. The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop. Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.
Fixes: ef1a628d83fc ("b43: Implement dynamic PHY API")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Michael Büsch <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20211006073621.GE8404@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/b43/phy_g.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/b43/phy_g.c b/drivers/net/wireless/broadcom/b43/phy_g.c
index d5a1a5c582366..ac72ca39e409b 100644
--- a/drivers/net/wireless/broadcom/b43/phy_g.c
+++ b/drivers/net/wireless/broadcom/b43/phy_g.c
@@ -2297,7 +2297,7 @@ static u8 b43_gphy_aci_scan(struct b43_wldev *dev)
b43_phy_mask(dev, B43_PHY_G_CRS, 0x7FFF);
b43_set_all_gains(dev, 3, 8, 1);
- start = (channel - 5 > 0) ? channel - 5 : 1;
+ start = (channel > 5) ? channel - 5 : 1;
end = (channel + 5 < 14) ? channel + 5 : 13;
for (i = start; i <= end; i++) {
--
2.33.0
From: John Fraker <[email protected]>
[ Upstream commit 87a7f321bb6a45e54b7d6c90d032ee5636a6ad97 ]
Don't always reset the driver on a TX timeout. Attempt to
recover by kicking the queue in case an IRQ was missed.
Fixes: 9e5f7d26a4c08 ("gve: Add workqueue and reset support")
Signed-off-by: John Fraker <[email protected]>
Signed-off-by: David Awogbemila <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/google/gve/gve.h | 4 +-
drivers/net/ethernet/google/gve/gve_adminq.h | 1 +
drivers/net/ethernet/google/gve/gve_main.c | 48 +++++++++++++++++++-
3 files changed, 51 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index cfb174624d4ee..5c9a4d4362c7b 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -28,7 +28,7 @@
#define GVE_MIN_MSIX 3
/* Numbers of gve tx/rx stats in stats report. */
-#define GVE_TX_STATS_REPORT_NUM 5
+#define GVE_TX_STATS_REPORT_NUM 6
#define GVE_RX_STATS_REPORT_NUM 2
/* Interval to schedule a stats report update, 20000ms. */
@@ -147,7 +147,9 @@ struct gve_tx_ring {
u32 q_num ____cacheline_aligned; /* queue idx */
u32 stop_queue; /* count of queue stops */
u32 wake_queue; /* count of queue wakes */
+ u32 queue_timeout; /* count of queue timeouts */
u32 ntfy_id; /* notification block index */
+ u32 last_kick_msec; /* Last time the queue was kicked */
dma_addr_t bus; /* dma address of the descr ring */
dma_addr_t q_resources_bus; /* dma address of the queue resources */
struct u64_stats_sync statss; /* sync stats for 32bit archs */
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 015796a20118b..8dbc2c03fbbdd 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -212,6 +212,7 @@ enum gve_stat_names {
TX_LAST_COMPLETION_PROCESSED = 5,
RX_NEXT_EXPECTED_SEQUENCE = 6,
RX_BUFFERS_POSTED = 7,
+ TX_TIMEOUT_CNT = 8,
// stats from NIC
RX_QUEUE_DROP_CNT = 65,
RX_NO_BUFFERS_POSTED = 66,
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index fd52218f48846..3e96b2a11c5bf 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -23,6 +23,9 @@
#define GVE_VERSION "1.0.0"
#define GVE_VERSION_PREFIX "GVE-"
+// Minimum amount of time between queue kicks in msec (10 seconds)
+#define MIN_TX_TIMEOUT_GAP (1000 * 10)
+
const char gve_version_str[] = GVE_VERSION;
static const char gve_version_prefix[] = GVE_VERSION_PREFIX;
@@ -943,9 +946,47 @@ static void gve_turnup(struct gve_priv *priv)
static void gve_tx_timeout(struct net_device *dev, unsigned int txqueue)
{
- struct gve_priv *priv = netdev_priv(dev);
+ struct gve_notify_block *block;
+ struct gve_tx_ring *tx = NULL;
+ struct gve_priv *priv;
+ u32 last_nic_done;
+ u32 current_time;
+ u32 ntfy_idx;
+
+ netdev_info(dev, "Timeout on tx queue, %d", txqueue);
+ priv = netdev_priv(dev);
+ if (txqueue > priv->tx_cfg.num_queues)
+ goto reset;
+
+ ntfy_idx = gve_tx_idx_to_ntfy(priv, txqueue);
+ if (ntfy_idx > priv->num_ntfy_blks)
+ goto reset;
+
+ block = &priv->ntfy_blocks[ntfy_idx];
+ tx = block->tx;
+ current_time = jiffies_to_msecs(jiffies);
+ if (tx->last_kick_msec + MIN_TX_TIMEOUT_GAP > current_time)
+ goto reset;
+
+ /* Check to see if there are missed completions, which will allow us to
+ * kick the queue.
+ */
+ last_nic_done = gve_tx_load_event_counter(priv, tx);
+ if (last_nic_done - tx->done) {
+ netdev_info(dev, "Kicking queue %d", txqueue);
+ iowrite32be(GVE_IRQ_MASK, gve_irq_doorbell(priv, block));
+ napi_schedule(&block->napi);
+ tx->last_kick_msec = current_time;
+ goto out;
+ } // Else reset.
+
+reset:
gve_schedule_reset(priv);
+
+out:
+ if (tx)
+ tx->queue_timeout++;
priv->tx_timeo_cnt++;
}
@@ -1028,6 +1069,11 @@ void gve_handle_report_stats(struct gve_priv *priv)
.value = cpu_to_be64(priv->tx[idx].done),
.queue_id = cpu_to_be32(idx),
};
+ stats[stats_idx++] = (struct stats) {
+ .stat_name = cpu_to_be32(TX_TIMEOUT_CNT),
+ .value = cpu_to_be64(priv->tx[idx].queue_timeout),
+ .queue_id = cpu_to_be32(idx),
+ };
}
}
/* rx stats */
--
2.33.0
From: Vincent Donnefort <[email protected]>
[ Upstream commit aa1a43262ad5df010768f69530fa179ff81651d3 ]
Currently, a debug message is printed if an inefficient state is detected
in the Energy Model. Unfortunately, it won't detect if the first state is
inefficient or if two successive states are. Fix this behavior.
Fixes: 27871f7a8a34 (PM: Introduce an Energy Model management framework)
Signed-off-by: Vincent Donnefort <[email protected]>
Reviewed-by: Quentin Perret <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/power/energy_model.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)
diff --git a/kernel/power/energy_model.c b/kernel/power/energy_model.c
index be381eb6116a1..119b929dcff0f 100644
--- a/kernel/power/energy_model.c
+++ b/kernel/power/energy_model.c
@@ -94,8 +94,7 @@ static void em_debug_remove_pd(struct device *dev) {}
static int em_create_perf_table(struct device *dev, struct em_perf_domain *pd,
int nr_states, struct em_data_callback *cb)
{
- unsigned long opp_eff, prev_opp_eff = ULONG_MAX;
- unsigned long power, freq, prev_freq = 0;
+ unsigned long power, freq, prev_freq = 0, prev_cost = ULONG_MAX;
struct em_perf_state *table;
int i, ret;
u64 fmax;
@@ -140,27 +139,21 @@ static int em_create_perf_table(struct device *dev, struct em_perf_domain *pd,
table[i].power = power;
table[i].frequency = prev_freq = freq;
-
- /*
- * The hertz/watts efficiency ratio should decrease as the
- * frequency grows on sane platforms. But this isn't always
- * true in practice so warn the user if a higher OPP is more
- * power efficient than a lower one.
- */
- opp_eff = freq / power;
- if (opp_eff >= prev_opp_eff)
- dev_dbg(dev, "EM: hertz/watts ratio non-monotonically decreasing: em_perf_state %d >= em_perf_state%d\n",
- i, i - 1);
- prev_opp_eff = opp_eff;
}
/* Compute the cost of each performance state. */
fmax = (u64) table[nr_states - 1].frequency;
- for (i = 0; i < nr_states; i++) {
+ for (i = nr_states - 1; i >= 0; i--) {
unsigned long power_res = em_scale_power(table[i].power);
table[i].cost = div64_u64(fmax * power_res,
table[i].frequency);
+ if (table[i].cost >= prev_cost) {
+ dev_dbg(dev, "EM: OPP:%lu is inefficient\n",
+ table[i].frequency);
+ } else {
+ prev_cost = table[i].cost;
+ }
}
pd->table = table;
--
2.33.0
From: Giovanni Cabiddu <[email protected]>
[ Upstream commit 18fcba469ba5359c1de7e3fb16f7b9e8cd1b8e02 ]
Upon receiving a PFVF message, check if the interrupt bit is set in the
message. If it is not, that means that the interrupt was probably
triggered by a collision. In this case, disregard the message and
re-enable the interrupts.
Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <[email protected]>
Reviewed-by: Marco Chiappero <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 6 ++++++
drivers/crypto/qat/qat_common/adf_vf_isr.c | 6 ++++++
2 files changed, 12 insertions(+)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index a5bd77d0f0487..d7ca222f0df18 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -205,6 +205,11 @@ void adf_vf2pf_req_hndl(struct adf_accel_vf_info *vf_info)
/* Read message from the VF */
msg = ADF_CSR_RD(pmisc_addr, hw_data->get_pf2vf_offset(vf_nr));
+ if (!(msg & ADF_VF2PF_INT)) {
+ dev_info(&GET_DEV(accel_dev),
+ "Spurious VF2PF interrupt, msg %X. Ignored\n", msg);
+ goto out;
+ }
/* To ACK, clear the VF2PFINT bit */
msg &= ~ADF_VF2PF_INT;
@@ -288,6 +293,7 @@ void adf_vf2pf_req_hndl(struct adf_accel_vf_info *vf_info)
if (resp && adf_iov_putmsg(accel_dev, resp, vf_nr))
dev_err(&GET_DEV(accel_dev), "Failed to send response to VF\n");
+out:
/* re-enable interrupt on PF from this VF */
adf_enable_vf2pf_interrupts(accel_dev, (1 << vf_nr));
return;
diff --git a/drivers/crypto/qat/qat_common/adf_vf_isr.c b/drivers/crypto/qat/qat_common/adf_vf_isr.c
index 024401ec9d1ae..fa1b3a94155cc 100644
--- a/drivers/crypto/qat/qat_common/adf_vf_isr.c
+++ b/drivers/crypto/qat/qat_common/adf_vf_isr.c
@@ -79,6 +79,11 @@ static void adf_pf2vf_bh_handler(void *data)
/* Read the message from PF */
msg = ADF_CSR_RD(pmisc_bar_addr, hw_data->get_pf2vf_offset(0));
+ if (!(msg & ADF_PF2VF_INT)) {
+ dev_info(&GET_DEV(accel_dev),
+ "Spurious PF2VF interrupt, msg %X. Ignored\n", msg);
+ goto out;
+ }
if (!(msg & ADF_PF2VF_MSGORIGIN_SYSTEM))
/* Ignore legacy non-system (non-kernel) PF2VF messages */
@@ -127,6 +132,7 @@ static void adf_pf2vf_bh_handler(void *data)
msg &= ~ADF_PF2VF_INT;
ADF_CSR_WR(pmisc_bar_addr, hw_data->get_pf2vf_offset(0), msg);
+out:
/* Re-enable PF2VF interrupts */
adf_enable_pf2vf_interrupts(accel_dev);
return;
--
2.33.0
From: Colin Ian King <[email protected]>
[ Upstream commit 51fa3b70d27342baf1ea8aaab3e96e5f4f26d5b2 ]
The call to ops->suspend for the dev->dev_next case can currently
trigger a call on a null function pointer if ops->suspend is null.
Skip over the use of function ops->suspend if it is null.
Addresses-Coverity: ("Dereference after null check")
Fixes: be7fd3c3a8c5 ("media: em28xx: Hauppauge DualHD second tuner functionality")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/em28xx/em28xx-core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c
index 3daa64bb1e1d9..af9216278024f 100644
--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -1152,8 +1152,9 @@ int em28xx_suspend_extension(struct em28xx *dev)
dev_info(&dev->intf->dev, "Suspending extensions\n");
mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
- if (ops->suspend)
- ops->suspend(dev);
+ if (!ops->suspend)
+ continue;
+ ops->suspend(dev);
if (dev->dev_next)
ops->suspend(dev->dev_next);
}
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit 38aa192a05f22f9778f9420e630f0322525ef12e ]
The ecc.c file started out as part of the ECDH algorithm but got
moved out into a standalone module later. It does not build without
CRYPTO_DEFAULT_RNG, so now that other modules are using it as well we
can run into this link error:
aarch64-linux-ld: ecc.c:(.text+0xfc8): undefined reference to `crypto_default_rng'
aarch64-linux-ld: ecc.c:(.text+0xff4): undefined reference to `crypto_put_default_rng'
Move the 'select CRYPTO_DEFAULT_RNG' statement into the correct symbol.
Fixes: 0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm")
Fixes: 4e6602916bc6 ("crypto: ecdsa - Add support for ECDSA signature verification")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 774adc9846fa8..1157f82dc9cf4 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -238,12 +238,12 @@ config CRYPTO_DH
config CRYPTO_ECC
tristate
+ select CRYPTO_RNG_DEFAULT
config CRYPTO_ECDH
tristate "ECDH algorithm"
select CRYPTO_ECC
select CRYPTO_KPP
- select CRYPTO_RNG_DEFAULT
help
Generic implementation of the ECDH algorithm
--
2.33.0
From: Yazen Ghannam <[email protected]>
[ Upstream commit 9f4873fb6af7966de8fcbd95c36b61351c1c4b1f ]
AMD Rome systems and later support interleaving between three identical
ranks within a channel.
Check for this mode by counting the number of enabled chip selects and
comparing their masks. If there are exactly three enabled chip selects
and their masks are identical, then three rank interleaving is enabled.
The size of a rank is determined from its mask value. However, three
rank interleaving doesn't follow the method of swapping an interleave
bit with the most significant bit. Rather, the interleave bit is flipped
and the most significant bit remains the same. There is only a single
interleave bit in this case.
Account for this when determining the chip select size by keeping the
most significant bit at its original value and ignoring any zero bits.
This will return a full bitmask in [MSB:1].
Fixes: e53a3b267fb0 ("EDAC/amd64: Find Chip Select memory size using Address Mask")
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/edac/amd64_edac.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index b36d5879b91e0..f5635dfa9acf6 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -786,12 +786,14 @@ static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan)
#define CS_ODD_PRIMARY BIT(1)
#define CS_EVEN_SECONDARY BIT(2)
#define CS_ODD_SECONDARY BIT(3)
+#define CS_3R_INTERLEAVE BIT(4)
#define CS_EVEN (CS_EVEN_PRIMARY | CS_EVEN_SECONDARY)
#define CS_ODD (CS_ODD_PRIMARY | CS_ODD_SECONDARY)
static int f17_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt)
{
+ u8 base, count = 0;
int cs_mode = 0;
if (csrow_enabled(2 * dimm, ctrl, pvt))
@@ -804,6 +806,20 @@ static int f17_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt)
if (csrow_sec_enabled(2 * dimm + 1, ctrl, pvt))
cs_mode |= CS_ODD_SECONDARY;
+ /*
+ * 3 Rank inteleaving support.
+ * There should be only three bases enabled and their two masks should
+ * be equal.
+ */
+ for_each_chip_select(base, ctrl, pvt)
+ count += csrow_enabled(base, ctrl, pvt);
+
+ if (count == 3 &&
+ pvt->csels[ctrl].csmasks[0] == pvt->csels[ctrl].csmasks[1]) {
+ edac_dbg(1, "3R interleaving in use.\n");
+ cs_mode |= CS_3R_INTERLEAVE;
+ }
+
return cs_mode;
}
@@ -1612,10 +1628,14 @@ static int f17_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc,
*
* The MSB is the number of bits in the full mask because BIT[0] is
* always 0.
+ *
+ * In the special 3 Rank interleaving case, a single bit is flipped
+ * without swapping with the most significant bit. This can be handled
+ * by keeping the MSB where it is and ignoring the single zero bit.
*/
msb = fls(addr_mask_orig) - 1;
weight = hweight_long(addr_mask_orig);
- num_zero_bits = msb - weight;
+ num_zero_bits = msb - weight - !!(cs_mode & CS_3R_INTERLEAVE);
/* Take the number of zero bits off from the top of the mask. */
addr_mask_deinterleaved = GENMASK_ULL(msb - num_zero_bits, 1);
--
2.33.0
From: Punit Agrawal <[email protected]>
[ Upstream commit 8f7262cd66699a4b02eb7549b35c81b2116aad95 ]
debugfs_create_file() takes a pointer argument that can be used during
file operation callbacks (accessible via i_private in the inode
structure). An obvious requirement is for the pointer to refer to
valid memory when used.
When creating the debugfs file to dynamically enable / disable
kprobes, a pointer to local variable is passed to
debugfs_create_file(); which will go out of scope when the init
function returns. The reason this hasn't triggered random memory
corruption is because the pointer is not accessed during the debugfs
file callbacks.
Since the enabled state is managed by the kprobes_all_disabled global
variable, the local variable is not needed. Fix the incorrect (and
unnecessary) usage of local variable during debugfs_file_create() by
passing NULL instead.
Link: https://lkml.kernel.org/r/163163031686.489837.4476867635937014973.stgit@devnote2
Fixes: bf8f6e5b3e51 ("Kprobes: The ON/OFF knob thru debugfs")
Signed-off-by: Punit Agrawal <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/kprobes.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index f590e9ff37062..66a6ba81edb1e 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -2943,13 +2943,12 @@ static const struct file_operations fops_kp = {
static int __init debugfs_kprobe_init(void)
{
struct dentry *dir;
- unsigned int value = 1;
dir = debugfs_create_dir("kprobes", NULL);
debugfs_create_file("list", 0400, dir, NULL, &kprobes_fops);
- debugfs_create_file("enabled", 0600, dir, &value, &fops_kp);
+ debugfs_create_file("enabled", 0600, dir, NULL, &fops_kp);
debugfs_create_file("blacklist", 0400, dir, NULL,
&kprobe_blacklist_fops);
--
2.33.0
From: Kees Cook <[email protected]>
[ Upstream commit 42bb98e420d454fef3614b70ea11cc59068395f6 ]
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Trident TVMaster TM5600/6000/60".
Suggested-by: Hans Verkuil <[email protected]>
Fixes: e28f49b0b2a8 ("V4L/DVB: tm6000: fix some info messages")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/tm6000/tm6000-video.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c
index 2df736c029d6e..01071e6cd7574 100644
--- a/drivers/media/usb/tm6000/tm6000-video.c
+++ b/drivers/media/usb/tm6000/tm6000-video.c
@@ -854,8 +854,7 @@ static int vidioc_querycap(struct file *file, void *priv,
struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
strscpy(cap->driver, "tm6000", sizeof(cap->driver));
- strscpy(cap->card, "Trident TVMaster TM5600/6000/6010",
- sizeof(cap->card));
+ strscpy(cap->card, "Trident TM5600/6000/6010", sizeof(cap->card));
usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
V4L2_CAP_DEVICE_CAPS;
--
2.33.0
From: Shuah Khan <[email protected]>
[ Upstream commit f35dcaa0a8a29188ed61083d153df1454cf89d08 ]
close_range() test type conflicts with close_range() library call in
x86_64-linux-gnu/bits/unistd_ext.h. Fix it by changing the name to
core_close_range().
gcc -g -I../../../../usr/include/ close_range_test.c -o ../tools/testing/selftests/core/close_range_test
In file included from close_range_test.c:16:
close_range_test.c:57:6: error: conflicting types for ‘close_range’; have ‘void(struct __test_metadata *)’
57 | TEST(close_range)
| ^~~~~~~~~~~
../kselftest_harness.h:181:21: note: in definition of macro ‘__TEST_IMPL’
181 | static void test_name(struct __test_metadata *_metadata); \
| ^~~~~~~~~
close_range_test.c:57:1: note: in expansion of macro ‘TEST’
57 | TEST(close_range)
| ^~~~
In file included from /usr/include/unistd.h:1204,
from close_range_test.c:13:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:56:12: note: previous declaration of ‘close_range’ with type ‘int(unsigned int, unsigned int, int)’
56 | extern int close_range (unsigned int __fd, unsigned int __max_fd,
| ^~~~~~~~~~~
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/core/close_range_test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/core/close_range_test.c b/tools/testing/selftests/core/close_range_test.c
index 575b391ddc78d..0a26795842f6f 100644
--- a/tools/testing/selftests/core/close_range_test.c
+++ b/tools/testing/selftests/core/close_range_test.c
@@ -33,7 +33,7 @@ static inline int sys_close_range(unsigned int fd, unsigned int max_fd,
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#endif
-TEST(close_range)
+TEST(core_close_range)
{
int i, ret;
int open_fds[101];
--
2.33.0
From: Baochen Qiang <[email protected]>
[ Upstream commit 72de799aa9e3e064b35238ef053d2f0a49db055a ]
The buffer pointed to by event is not freed in case
ATH11K_FLAG_UNREGISTERING bit is set, resulting in
memory leak, so fix it.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/qmi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 2ae7c6bf091e9..c842e275d1adf 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -2616,8 +2616,10 @@ static void ath11k_qmi_driver_event_work(struct work_struct *work)
list_del(&event->list);
spin_unlock(&qmi->event_lock);
- if (test_bit(ATH11K_FLAG_UNREGISTERING, &ab->dev_flags))
+ if (test_bit(ATH11K_FLAG_UNREGISTERING, &ab->dev_flags)) {
+ kfree(event);
return;
+ }
switch (event->type) {
case ATH11K_QMI_EVENT_SERVER_ARRIVE:
--
2.33.0
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 701668d3bfa03dabc5095fc383d5315544ee5b31 ]
We have been tracking a strange bug with Antenna Diversity Switching (ADS)
on wcn3680b for a while.
ADS is configured like this:
A. Via a firmware configuration table baked into the NV area.
1. Defines if ADS is enabled.
2. Defines which GPIOs are connected to which antenna enable pin.
3. Defines which antenna/GPIO is primary and which is secondary.
B. WCN36XX_CFG_VAL(ANTENNA_DIVERSITY, N)
N is a bitmask of available antenna.
Setting N to 3 indicates a bitmask of enabled antenna (1 | 2).
Obviously then we can set N to 1 or N to 2 to fix to a particular
antenna and disable antenna diversity.
C. WCN36XX_CFG_VAL(ASD_PROBE_INTERVAL, XX)
XX is the number of beacons between each antenna RSSI check.
Setting this value to 50 means, every 50 received beacons, run the
ADS algorithm.
D. WCN36XX_CFG_VAL(ASD_TRIGGER_THRESHOLD, YY)
YY is a two's complement integer which specifies the RSSI decibel
threshold below which ADS will run.
We default to -60db here, meaning a measured RSSI <= -60db will
trigger an ADS probe.
E. WCN36XX_CFG_VAL(ASD_RTT_RSSI_HYST_THRESHOLD, Z)
Z is a hysteresis value, indicating a delta which the RSSI must
exceed for the antenna switch to be valid.
For example if HYST_THRESHOLD == 3 AntennaId1-RSSI == -60db and
AntennaId-2-RSSI == -58db then firmware will not switch antenna.
The threshold needs to be -57db or better to satisfy the criteria.
F. A firmware feature bit also exists ANTENNA_DIVERSITY_SELECTION.
This feature bit is used by the firmware to report if
ANTENNA_DIVERSITY_SELECTION is supported. The host is not required to
toggle this bit to enable or disable ADS.
ADS works like this:
A. Every XX beacons the firmware switches to or remains on the primary
antenna.
B. The firmware then sends a Request-To-Send (RTS) packet to the AP.
C. The firmware waits for a Clear-To-Send (CTS) response from the AP.
D. The firmware then notes the received RSSI on the CTS packet.
E. The firmware then repeats steps A-D on the secondary antenna.
F. Subsequently if the RSSI on the measured antenna is better than
ASD_TRIGGER_THRESHOLD + the active antenna's RSSI then the
measured antenna becomes the active antenna.
G. If RSSI rises past ASD_TRIGGER_THRESHOLD then ADS doesn't run at
all even if there is a substantially better RSSI on the alternative
antenna.
What we have been observing is that the RTS packet is being sent but the
MAC address is a byte-swapped version of the target MAC. The ADS/RTS MAC is
corrupted only when the link is encrypted, if the AP is open the RTS MAC is
correct. Similarly if we configure the firmware to an RTS/CTS sequence for
regular data - the transmitted RTS MAC is correctly formatted.
Internally the wcn36xx firmware uses the indexes in the SMD commands to
populate and extract data from specific entries in an STA lookup table. The
AP's MAC appears a number of times in different indexes within this lookup
table, so the MAC address extracted for the data-transmit RTS and the MAC
address extracted for the ADS/RTS packet are not the same STA table index.
Our analysis indicates the relevant firmware STA table index is
"bssSelfStaIdx".
There is an STA populate function responsible for formatting the MAC
address of the bssSelfStaIdx including byte-swapping the MAC address.
Its clear then that the required STA populate command did not run for
bssSelfStaIdx.
So taking a look at the sequence of SMD commands sent to the firmware we
see the following downstream when moving from an unencrypted to encrypted
BSS setup.
- WLAN_HAL_CONFIG_BSS_REQ
- WLAN_HAL_CONFIG_STA_REQ
- WLAN_HAL_SET_STAKEY_REQ
Upstream in wcn36xx we have
- WLAN_HAL_CONFIG_BSS_REQ
- WLAN_HAL_SET_STAKEY_REQ
The solution then is to add the missing WLAN_HAL_CONFIG_STA_REQ between
WLAN_HAL_CONFIG_BSS_REQ and WLAN_HAL_SET_STAKEY_REQ.
No surprise WLAN_HAL_CONFIG_STA_REQ is the routine responsible for
populating the STA lookup table in the firmware and once done the MAC sent
by the ADS routine is in the correct byte-order.
This bug is apparent with ADS but it is also the case that any other
firmware routine that depends on the "bssSelfStaIdx" would retrieve
malformed data on an encrypted link.
Fixes: 3e977c5c523d ("wcn36xx: Define wcn3680 specific firmware parameters")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Tested-by: Benjamin Li <[email protected]>
Reviewed-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 883534125df10..629ddfd74da1a 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -568,12 +568,14 @@ static int wcn36xx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (IEEE80211_KEY_FLAG_PAIRWISE & key_conf->flags) {
sta_priv->is_data_encrypted = true;
/* Reconfigure bss with encrypt_type */
- if (NL80211_IFTYPE_STATION == vif->type)
+ if (NL80211_IFTYPE_STATION == vif->type) {
wcn36xx_smd_config_bss(wcn,
vif,
sta,
sta->addr,
true);
+ wcn36xx_smd_config_sta(wcn, vif, sta);
+ }
wcn36xx_smd_set_stakey(wcn,
vif_priv->encrypt_type,
--
2.33.0
From: Yajun Deng <[email protected]>
[ Upstream commit aed0826b0cf2e488900ab92193893e803d65c070 ]
The key_domain member in struct net only exists if we define CONFIG_KEYS.
So we should add the define when we used key_domain.
Fixes: 9b242610514f ("keys: Network namespace domain tag")
Signed-off-by: Yajun Deng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/net_namespace.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 5c9d95f30be60..ac852db83de9f 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -486,7 +486,9 @@ struct net *copy_net_ns(unsigned long flags,
if (rv < 0) {
put_userns:
+#ifdef CONFIG_KEYS
key_remove_domain(net->key_domain);
+#endif
put_user_ns(user_ns);
net_drop_ns(net);
dec_ucounts:
@@ -618,7 +620,9 @@ static void cleanup_net(struct work_struct *work)
list_for_each_entry_safe(net, tmp, &net_exit_list, exit_list) {
list_del_init(&net->exit_list);
dec_net_namespaces(net->ucounts);
+#ifdef CONFIG_KEYS
key_remove_domain(net->key_domain);
+#endif
put_user_ns(net->user_ns);
net_drop_ns(net);
}
--
2.33.0
From: Loic Poulain <[email protected]>
[ Upstream commit 8a27ca39478270e07baf9c09aa0c99709769ba03 ]
For packets originating from hardware scan, the channel and band is
included in the buffer descriptor (bd->rf_band & bd->rx_ch).
For 2Ghz band the channel value is directly reported in the 4-bit
rx_ch field. For 5Ghz band, the rx_ch field contains a mapping
index (given the 4-bit limitation).
The reserved0 value field is also used to extend 4-bit mapping to
5-bit mapping to support more than 16 5Ghz channels.
This change adds correct reporting of the frequency/band, that is
used in scan mechanism. And is required for 5Ghz hardware scan
support.
Signed-off-by: Loic Poulain <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 23 +++++++++++++++++++++++
drivers/net/wireless/ath/wcn36xx/txrx.h | 3 ++-
2 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index eaf2410e39647..c0f51fa13dfa1 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -31,6 +31,13 @@ struct wcn36xx_rate {
enum rate_info_bw bw;
};
+/* Buffer descriptor rx_ch field is limited to 5-bit (4+1), a mapping is used
+ * for 11A Channels.
+ */
+static const u8 ab_rx_ch_map[] = { 36, 40, 44, 48, 52, 56, 60, 64, 100, 104,
+ 108, 112, 116, 120, 124, 128, 132, 136, 140,
+ 149, 153, 157, 161, 165, 144 };
+
static const struct wcn36xx_rate wcn36xx_rate_table[] = {
/* 11b rates */
{ 10, 0, RX_ENC_LEGACY, 0, RATE_INFO_BW_20 },
@@ -291,6 +298,22 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
ieee80211_is_probe_resp(hdr->frame_control))
status.boottime_ns = ktime_get_boottime_ns();
+ if (bd->scan_learn) {
+ /* If packet originates from hardware scanning, extract the
+ * band/channel from bd descriptor.
+ */
+ u8 hwch = (bd->reserved0 << 4) + bd->rx_ch;
+
+ if (bd->rf_band != 1 && hwch <= sizeof(ab_rx_ch_map) && hwch >= 1) {
+ status.band = NL80211_BAND_5GHZ;
+ status.freq = ieee80211_channel_to_frequency(ab_rx_ch_map[hwch - 1],
+ status.band);
+ } else {
+ status.band = NL80211_BAND_2GHZ;
+ status.freq = ieee80211_channel_to_frequency(hwch, status.band);
+ }
+ }
+
memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
if (ieee80211_is_beacon(hdr->frame_control)) {
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.h b/drivers/net/wireless/ath/wcn36xx/txrx.h
index 032216e82b2be..b54311ffde9c5 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.h
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.h
@@ -110,7 +110,8 @@ struct wcn36xx_rx_bd {
/* 0x44 */
u32 exp_seq_num:12;
u32 cur_seq_num:12;
- u32 fr_type_subtype:8;
+ u32 rf_band:2;
+ u32 fr_type_subtype:6;
/* 0x48 */
u32 msdu_size:16;
--
2.33.0
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit b7b1d02fc43925a4d569ec221715db2dfa1ce4f5 ]
The internal stream state sets the timeout to 120 seconds 2 seconds
after the creation of the flow, attach this internal stream state to the
IPS_ASSURED flag for consistent event reporting.
Before this patch:
[NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
[DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
Note IPS_ASSURED for the flow not yet in the internal stream state.
after this update:
[NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 120 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
[DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
Before this patch, short-lived UDP flows never entered IPS_ASSURED, so
they were already candidate flow to be deleted by early_drop under
stress.
Before this patch, IPS_ASSURED is set on regardless the internal stream
state, attach this internal stream state to IPS_ASSURED.
packet #1 (original direction) enters NEW state
packet #2 (reply direction) enters ESTABLISHED state, sets on IPS_SEEN_REPLY
paclet #3 (any direction) sets on IPS_ASSURED (if 2 seconds since the
creation has passed by).
Reported-by: Maciej Żenczykowski <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conntrack_proto_udp.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_conntrack_proto_udp.c b/net/netfilter/nf_conntrack_proto_udp.c
index af402f458ee02..0528e9c26cebd 100644
--- a/net/netfilter/nf_conntrack_proto_udp.c
+++ b/net/netfilter/nf_conntrack_proto_udp.c
@@ -105,10 +105,13 @@ int nf_conntrack_udp_packet(struct nf_conn *ct,
*/
if (test_bit(IPS_SEEN_REPLY_BIT, &ct->status)) {
unsigned long extra = timeouts[UDP_CT_UNREPLIED];
+ bool stream = false;
/* Still active after two seconds? Extend timeout. */
- if (time_after(jiffies, ct->proto.udp.stream_ts))
+ if (time_after(jiffies, ct->proto.udp.stream_ts)) {
extra = timeouts[UDP_CT_REPLIED];
+ stream = true;
+ }
nf_ct_refresh_acct(ct, ctinfo, skb, extra);
@@ -117,7 +120,7 @@ int nf_conntrack_udp_packet(struct nf_conn *ct,
return NF_ACCEPT;
/* Also, more likely to be important, and not a probe */
- if (!test_and_set_bit(IPS_ASSURED_BIT, &ct->status))
+ if (stream && !test_and_set_bit(IPS_ASSURED_BIT, &ct->status))
nf_conntrack_event_cache(IPCT_ASSURED, ct);
} else {
nf_ct_refresh_acct(ct, ctinfo, skb, timeouts[UDP_CT_UNREPLIED]);
--
2.33.0
From: Neeraj Upadhyay <[email protected]>
[ Upstream commit f0b2b2df5423fb369ac762c77900bc7765496d58 ]
The sync_sched_exp_online_cleanup() checks to see if RCU needs
an expedited quiescent state from the incoming CPU, sending it
an IPI if so. Before sending IPI, it checks whether expedited
qs need has been already requested for the incoming CPU, by
checking rcu_data.cpu_no_qs.b.exp for the current cpu, on which
sync_sched_exp_online_cleanup() is running. This works for the
case where incoming CPU is same as self. However, for the case
where incoming CPU is different from self, expedited request
won't get marked, which can potentially delay reporting of
expedited quiescent state for the incoming CPU.
Fixes: e015a3411220 ("rcu: Avoid self-IPI in sync_sched_exp_online_cleanup()")
Signed-off-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/tree_exp.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
index 8760b6ead770a..0ffe185c1f46a 100644
--- a/kernel/rcu/tree_exp.h
+++ b/kernel/rcu/tree_exp.h
@@ -759,7 +759,7 @@ static void sync_sched_exp_online_cleanup(int cpu)
my_cpu = get_cpu();
/* Quiescent state either not needed or already requested, leave. */
if (!(READ_ONCE(rnp->expmask) & rdp->grpmask) ||
- __this_cpu_read(rcu_data.cpu_no_qs.b.exp)) {
+ rdp->cpu_no_qs.b.exp) {
put_cpu();
return;
}
--
2.33.0
From: liuyuntao <[email protected]>
[ Upstream commit 5bd4f20de8acad37dbb3154feb34dbc36d506c02 ]
When kmem_cache_zalloc in virtio_gpu_get_vbuf fails, it will return
an error code. But none of its callers checks this error code, and
a core dump will take place.
Considering many of its callers can't handle such error, I add
a __GFP_NOFAIL flag when calling kmem_cache_zalloc to make sure
it won't fail, and delete those unused error handlings.
Fixes: dc5698e80cf724 ("Add virtio gpu driver.")
Signed-off-by: Yuntao Liu <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/virtio/virtgpu_vq.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c
index 07945ca238e2d..5e40fa0f5e8f2 100644
--- a/drivers/gpu/drm/virtio/virtgpu_vq.c
+++ b/drivers/gpu/drm/virtio/virtgpu_vq.c
@@ -91,9 +91,7 @@ virtio_gpu_get_vbuf(struct virtio_gpu_device *vgdev,
{
struct virtio_gpu_vbuffer *vbuf;
- vbuf = kmem_cache_zalloc(vgdev->vbufs, GFP_KERNEL);
- if (!vbuf)
- return ERR_PTR(-ENOMEM);
+ vbuf = kmem_cache_zalloc(vgdev->vbufs, GFP_KERNEL | __GFP_NOFAIL);
BUG_ON(size > MAX_INLINE_CMD_SIZE ||
size < sizeof(struct virtio_gpu_ctrl_hdr));
@@ -147,10 +145,6 @@ static void *virtio_gpu_alloc_cmd_resp(struct virtio_gpu_device *vgdev,
vbuf = virtio_gpu_get_vbuf(vgdev, cmd_size,
resp_size, resp_buf, cb);
- if (IS_ERR(vbuf)) {
- *vbuffer_p = NULL;
- return ERR_CAST(vbuf);
- }
*vbuffer_p = vbuf;
return (struct virtio_gpu_command *)vbuf->buf;
}
--
2.33.0
From: Aleksander Jan Bajkowski <[email protected]>
[ Upstream commit 5ad74d39c51dd41b3c819f4f5396655f0629b4fd ]
The current definition of 2W burst length is invalid.
This patch fixes it. Current downstream DEU driver doesn't
use DMA. An incorrect burst length value doesn't cause any
errors. This patch also adds other burst length values.
Fixes: dfec1a827d2b ("MIPS: Lantiq: Add DMA support")
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/xway/dma.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index e45077aecf83a..ab13e257132af 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -40,7 +40,11 @@
#define DMA_IRQ_ACK 0x7e /* IRQ status register */
#define DMA_POLL BIT(31) /* turn on channel polling */
#define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
-#define DMA_2W_BURST BIT(1) /* 2 word burst length */
+#define DMA_PCTRL_2W_BURST 0x1 /* 2 word burst length */
+#define DMA_PCTRL_4W_BURST 0x2 /* 4 word burst length */
+#define DMA_PCTRL_8W_BURST 0x3 /* 8 word burst length */
+#define DMA_TX_BURST_SHIFT 4 /* tx burst shift */
+#define DMA_RX_BURST_SHIFT 2 /* rx burst shift */
#define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
#define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
@@ -191,7 +195,8 @@ ltq_dma_init_port(int p)
break;
case DMA_PORT_DEU:
- ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2),
+ ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) |
+ (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
LTQ_DMA_PCTRL);
break;
--
2.33.0
From: Sebastian Andrzej Siewior <[email protected]>
[ Upstream commit 2507003a1d10917c9158077bf6030719d02c941e ]
lock_is_held_type(, 1) detects acquired read locks. It only recognized
locks acquired with lock_acquire_shared(). Read locks acquired with
lock_acquire_shared_recursive() are not recognized because a `2' is
stored as the read value.
Rework the check to additionally recognise lock's read value one and two
as a read held lock.
Fixes: e918188611f07 ("locking: More accurate annotations for read_lock()")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Boqun Feng <[email protected]>
Acked-by: Waiman Long <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 2823329143503..1f6a2f1226fa9 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -5303,7 +5303,7 @@ int __lock_is_held(const struct lockdep_map *lock, int read)
struct held_lock *hlock = curr->held_locks + i;
if (match_held_lock(hlock, lock)) {
- if (read == -1 || hlock->read == read)
+ if (read == -1 || !!hlock->read == read)
return 1;
return 0;
--
2.33.0
From: Josh Poimboeuf <[email protected]>
[ Upstream commit c26acfbbfbc2ae4167e33825793e85e1a53058d8 ]
xen_start_kernel() doesn't return. Annotate it as such so objtool can
follow the code flow.
Signed-off-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/930deafa89256c60b180442df59a1bbae48f30ab.1611263462.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
tools/objtool/check.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 5c83f73ad6687..ec15cadbb3d3e 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -156,6 +156,7 @@ static bool __dead_end_function(struct objtool_file *file, struct symbol *func,
"machine_real_restart",
"rewind_stack_do_exit",
"kunit_try_catch_throw",
+ "xen_start_kernel",
};
if (!func)
--
2.33.0
From: Peter Zijlstra <[email protected]>
[ Upstream commit 9af9dcf11bda3e2c0e24c1acaacb8685ad974e93 ]
The asm_cpu_bringup_and_idle() function is required to push the return
value on the stack in order to make ORC happy, but the only reason
objtool doesn't complain is because of a happy accident.
The thing is that asm_cpu_bringup_and_idle() doesn't return, so
validate_branch() never terminates and falls through to the next
function, which in the normal case is the hypercall_page. And that, as
it happens, is 4095 NOPs and a RET.
Make asm_cpu_bringup_and_idle() terminate on it's own, by making the
function it calls as a dead-end. This way we no longer rely on what
code happens to come after.
Fixes: c3881eb58d56 ("x86/xen: Make the secondary CPU idle tasks reliable")
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/objtool/check.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index ec15cadbb3d3e..4261f93ce06f9 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -157,6 +157,7 @@ static bool __dead_end_function(struct objtool_file *file, struct symbol *func,
"rewind_stack_do_exit",
"kunit_try_catch_throw",
"xen_start_kernel",
+ "cpu_bringup_and_idle",
};
if (!func)
--
2.33.0
From: Iago Toral Quiroga <[email protected]>
[ Upstream commit e4f868191138975f2fdf2f37c11318b47db4acc9 ]
The hardware sets the TMUWCF bit back to 0 when the TMU write
combiner flush completes so we should be checking for that instead
of the L2TFLS bit.
v2 (Melissa Wen):
- Add Signed-off-by and Fixes tags.
- Change the error message for the timeout to be more clear.
Fixes spurious Vulkan CTS failures in:
dEQP-VK.binding_model.descriptorset_random.*
Fixes: d223f98f02099 ("drm/v3d: Add support for compute shader dispatch.")
Signed-off-by: Iago Toral Quiroga <[email protected]>
Reviewed-by: Melissa Wen <[email protected]>
Signed-off-by: Melissa Wen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/v3d/v3d_gem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index 182c586525eb8..64fe63c1938f5 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -195,8 +195,8 @@ v3d_clean_caches(struct v3d_dev *v3d)
V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, V3D_L2TCACTL_TMUWCF);
if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) &
- V3D_L2TCACTL_L2TFLS), 100)) {
- DRM_ERROR("Timeout waiting for L1T write combiner flush\n");
+ V3D_L2TCACTL_TMUWCF), 100)) {
+ DRM_ERROR("Timeout waiting for TMU write combiner flush\n");
}
mutex_lock(&v3d->cache_clean_lock);
--
2.33.0
From: Dinghao Liu <[email protected]>
[ Upstream commit 3e5f2d90c28f9454e421108554707620bc23269d ]
bdev->evt_skb will get freed in the normal path and one error path
of mtk_hci_wmt_sync, while the other error paths do not free it,
which may cause a memleak. This bug is suggested by a static analysis
tool, please advise.
Fixes: e0b67035a90b ("Bluetooth: mediatek: update the common setup between MT7622 and other devices")
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btmtkuart.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
index 6c40bc75fb5b8..719d4685a2ddd 100644
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -158,8 +158,10 @@ static int mtk_hci_wmt_sync(struct hci_dev *hdev,
int err;
hlen = sizeof(*hdr) + wmt_params->dlen;
- if (hlen > 255)
- return -EINVAL;
+ if (hlen > 255) {
+ err = -EINVAL;
+ goto err_free_skb;
+ }
hdr = (struct mtk_wmt_hdr *)&wc;
hdr->dir = 1;
@@ -173,7 +175,7 @@ static int mtk_hci_wmt_sync(struct hci_dev *hdev,
err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
if (err < 0) {
clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
- return err;
+ goto err_free_skb;
}
/* The vendor specific WMT commands are all answered by a vendor
@@ -190,13 +192,14 @@ static int mtk_hci_wmt_sync(struct hci_dev *hdev,
if (err == -EINTR) {
bt_dev_err(hdev, "Execution of wmt command interrupted");
clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
- return err;
+ goto err_free_skb;
}
if (err) {
bt_dev_err(hdev, "Execution of wmt command timed out");
clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
- return -ETIMEDOUT;
+ err = -ETIMEDOUT;
+ goto err_free_skb;
}
/* Parse and handle the return WMT event */
--
2.33.0
From: Ajay Singh <[email protected]>
[ Upstream commit 3c719fed0f3a5e95b1d164609ecc81c4191ade70 ]
When the BSS reference holds a valid reference, it is not freed. The 'if'
condition is wrong. Instead of the 'if (bss)' check, the 'if (!bss)' check
is used.
The issue is solved by removing the unnecessary 'if' check because
cfg80211_put_bss() already performs the NULL validation.
Fixes: 6cd4fa5ab691 ("staging: wilc1000: make use of cfg80211_inform_bss_frame()")
Signed-off-by: Ajay Singh <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/microchip/wilc1000/cfg80211.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index c1ac1d84790f0..6be5ac8ba518d 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -129,8 +129,7 @@ static void cfg_scan_result(enum scan_event scan_event,
info->frame_len,
(s32)info->rssi * 100,
GFP_KERNEL);
- if (!bss)
- cfg80211_put_bss(wiphy, bss);
+ cfg80211_put_bss(wiphy, bss);
} else if (scan_event == SCAN_EVENT_DONE) {
mutex_lock(&priv->scan_req_lock);
--
2.33.0
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 0133c20480b14820d43c37c0e9502da4bffcad3a ]
After most recent nightly Clang update strobemeta selftests started
failing with the following error (relevant portion of assembly included):
1624: (85) call bpf_probe_read_user_str#114
1625: (bf) r1 = r0
1626: (18) r2 = 0xfffffffe
1628: (5f) r1 &= r2
1629: (55) if r1 != 0x0 goto pc+7
1630: (07) r9 += 104
1631: (6b) *(u16 *)(r9 +0) = r0
1632: (67) r0 <<= 32
1633: (77) r0 >>= 32
1634: (79) r1 = *(u64 *)(r10 -456)
1635: (0f) r1 += r0
1636: (7b) *(u64 *)(r10 -456) = r1
1637: (79) r1 = *(u64 *)(r10 -368)
1638: (c5) if r1 s< 0x1 goto pc+778
1639: (bf) r6 = r8
1640: (0f) r6 += r7
1641: (b4) w1 = 0
1642: (6b) *(u16 *)(r6 +108) = r1
1643: (79) r3 = *(u64 *)(r10 -352)
1644: (79) r9 = *(u64 *)(r10 -456)
1645: (bf) r1 = r9
1646: (b4) w2 = 1
1647: (85) call bpf_probe_read_user_str#114
R1 unbounded memory access, make sure to bounds check any such access
In the above code r0 and r1 are implicitly related. Clang knows that,
but verifier isn't able to infer this relationship.
Yonghong Song narrowed down this "regression" in code generation to
a recent Clang optimization change ([0]), which for BPF target generates
code pattern that BPF verifier can't handle and loses track of register
boundaries.
This patch works around the issue by adding an BPF assembly-based helper
that helps to prove to the verifier that upper bound of the register is
a given constant by controlling the exact share of generated BPF
instruction sequence. This fixes the immediate issue for strobemeta
selftest.
[0] https://github.com/llvm/llvm-project/commit/acabad9ff6bf13e00305d9d8621ee8eafc1f8b08
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/progs/strobemeta.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/tools/testing/selftests/bpf/progs/strobemeta.h b/tools/testing/selftests/bpf/progs/strobemeta.h
index 7de534f38c3f1..3687ea755ab5a 100644
--- a/tools/testing/selftests/bpf/progs/strobemeta.h
+++ b/tools/testing/selftests/bpf/progs/strobemeta.h
@@ -10,6 +10,14 @@
#include <linux/types.h>
#include <bpf/bpf_helpers.h>
+#define bpf_clamp_umax(VAR, UMAX) \
+ asm volatile ( \
+ "if %0 <= %[max] goto +1\n" \
+ "%0 = %[max]\n" \
+ : "+r"(VAR) \
+ : [max]"i"(UMAX) \
+ )
+
typedef uint32_t pid_t;
struct task_struct {};
@@ -413,6 +421,7 @@ static __always_inline void *read_map_var(struct strobemeta_cfg *cfg,
len = bpf_probe_read_user_str(payload, STROBE_MAX_STR_LEN, map.tag);
if (len <= STROBE_MAX_STR_LEN) {
+ bpf_clamp_umax(len, STROBE_MAX_STR_LEN);
descr->tag_len = len;
payload += len;
}
@@ -430,6 +439,7 @@ static __always_inline void *read_map_var(struct strobemeta_cfg *cfg,
len = bpf_probe_read_user_str(payload, STROBE_MAX_STR_LEN,
map.entries[i].key);
if (len <= STROBE_MAX_STR_LEN) {
+ bpf_clamp_umax(len, STROBE_MAX_STR_LEN);
descr->key_lens[i] = len;
payload += len;
}
@@ -437,6 +447,7 @@ static __always_inline void *read_map_var(struct strobemeta_cfg *cfg,
len = bpf_probe_read_user_str(payload, STROBE_MAX_STR_LEN,
map.entries[i].val);
if (len <= STROBE_MAX_STR_LEN) {
+ bpf_clamp_umax(len, STROBE_MAX_STR_LEN);
descr->val_lens[i] = len;
payload += len;
}
--
2.33.0
From: Vitaly Kuznetsov <[email protected]>
[ Upstream commit 285f68afa8b20f752b0b7194d54980b5e0e27b75 ]
The following issue is observed with CONFIG_DEBUG_PREEMPT when KVM loads:
KVM: vmx: using Hyper-V Enlightened VMCS
BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/488
caller is set_hv_tscchange_cb+0x16/0x80
CPU: 1 PID: 488 Comm: systemd-udevd Not tainted 5.15.0-rc5+ #396
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
Call Trace:
dump_stack_lvl+0x6a/0x9a
check_preemption_disabled+0xde/0xe0
? kvm_gen_update_masterclock+0xd0/0xd0 [kvm]
set_hv_tscchange_cb+0x16/0x80
kvm_arch_init+0x23f/0x290 [kvm]
kvm_init+0x30/0x310 [kvm]
vmx_init+0xaf/0x134 [kvm_intel]
...
set_hv_tscchange_cb() can get preempted in between acquiring
smp_processor_id() and writing to HV_X64_MSR_REENLIGHTENMENT_CONTROL. This
is not an issue by itself: HV_X64_MSR_REENLIGHTENMENT_CONTROL is a
partition-wide MSR and it doesn't matter which particular CPU will be
used to receive reenlightenment notifications. The only real problem can
(in theory) be observed if the CPU whose id was acquired with
smp_processor_id() goes offline before we manage to write to the MSR,
the logic in hv_cpu_die() won't be able to reassign it correctly.
Reported-by: Michael Kelley <[email protected]>
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/hyperv/hv_init.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 6375967a8244d..3cf4030232590 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -168,7 +168,6 @@ void set_hv_tscchange_cb(void (*cb)(void))
struct hv_reenlightenment_control re_ctrl = {
.vector = HYPERV_REENLIGHTENMENT_VECTOR,
.enabled = 1,
- .target_vp = hv_vp_index[smp_processor_id()]
};
struct hv_tsc_emulation_control emu_ctrl = {.enabled = 1};
@@ -182,8 +181,12 @@ void set_hv_tscchange_cb(void (*cb)(void))
/* Make sure callback is registered before we write to MSRs */
wmb();
+ re_ctrl.target_vp = hv_vp_index[get_cpu()];
+
wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
wrmsrl(HV_X64_MSR_TSC_EMULATION_CONTROL, *((u64 *)&emu_ctrl));
+
+ put_cpu();
}
EXPORT_SYMBOL_GPL(set_hv_tscchange_cb);
--
2.33.0
From: Yifan Zhang <[email protected]>
[ Upstream commit 6f4b590aae217da16cfa44039a2abcfb209137ab ]
When IOMMU disabled in sbios and kfd in iommuv2 path,
IOMMU resume failure blocks system resume. Don't allow kfd to
use iommu v2 when iommu is disabled.
Reported-by: youling <[email protected]>
Tested-by: youling <[email protected]>
Signed-off-by: Yifan Zhang <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdkfd/kfd_device.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
index 903170e59342c..5751bddc9cadd 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -744,6 +744,7 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd,
kfd_double_confirm_iommu_support(kfd);
if (kfd_iommu_device_init(kfd)) {
+ kfd->use_iommu_v2 = false;
dev_err(kfd_device, "Error initializing iommuv2\n");
goto device_iommu_error;
}
--
2.33.0
From: Peter Zijlstra <[email protected]>
[ Upstream commit a958c4fea768d2c378c89032ab41d38da2a24422 ]
Currently, objtool generates tail call entries in add_jump_destination()
but waits until validate_branch() to generate the regular call entries.
Move these to add_call_destination() for consistency.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/objtool/check.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 4261f93ce06f9..8932f41c387ff 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -954,6 +954,11 @@ static int add_call_destinations(struct objtool_file *file)
} else
insn->call_dest = reloc->sym;
+ if (insn->call_dest && insn->call_dest->static_call_tramp) {
+ list_add_tail(&insn->static_call_node,
+ &file->static_call_list);
+ }
+
/*
* Many compilers cannot disable KCOV with a function attribute
* so they need a little help, NOP out any KCOV calls from noinstr
@@ -1668,6 +1673,9 @@ static int decode_sections(struct objtool_file *file)
if (ret)
return ret;
+ /*
+ * Must be before add_{jump_call}_destination.
+ */
ret = read_static_call_tramps(file);
if (ret)
return ret;
@@ -1680,6 +1688,10 @@ static int decode_sections(struct objtool_file *file)
if (ret)
return ret;
+ /*
+ * Must be before add_call_destination(); it changes INSN_CALL to
+ * INSN_JUMP.
+ */
ret = read_intra_function_calls(file);
if (ret)
return ret;
@@ -2534,11 +2546,6 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
if (dead_end_function(file, insn->call_dest))
return 0;
- if (insn->type == INSN_CALL && insn->call_dest->static_call_tramp) {
- list_add_tail(&insn->static_call_node,
- &file->static_call_list);
- }
-
break;
case INSN_JUMP_CONDITIONAL:
--
2.33.0
From: Desmond Cheong Zhi Xi <[email protected]>
[ Upstream commit 49d8a5606428ca0962d09050a5af81461ff90fbb ]
Before freeing struct sco_conn, all delayed timeout work should be
cancelled. Otherwise, sco_sock_timeout could potentially use the
sco_conn after it has been freed.
Additionally, sco_conn.timeout_work should be initialized when the
connection is allocated, not when the channel is added. This is
because an sco_conn can create channels with multiple sockets over its
lifetime, which happens if sockets are released but the connection
isn't deleted.
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Desmond Cheong Zhi Xi <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/sco.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 93df269a64707..2f2b8ddc4dd5d 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -134,6 +134,7 @@ static struct sco_conn *sco_conn_add(struct hci_conn *hcon)
return NULL;
spin_lock_init(&conn->lock);
+ INIT_DELAYED_WORK(&conn->timeout_work, sco_sock_timeout);
hcon->sco_data = conn;
conn->hcon = hcon;
@@ -197,11 +198,11 @@ static void sco_conn_del(struct hci_conn *hcon, int err)
sco_chan_del(sk, err);
bh_unlock_sock(sk);
sock_put(sk);
-
- /* Ensure no more work items will run before freeing conn. */
- cancel_delayed_work_sync(&conn->timeout_work);
}
+ /* Ensure no more work items will run before freeing conn. */
+ cancel_delayed_work_sync(&conn->timeout_work);
+
hcon->sco_data = NULL;
kfree(conn);
}
@@ -214,8 +215,6 @@ static void __sco_chan_add(struct sco_conn *conn, struct sock *sk,
sco_pi(sk)->conn = conn;
conn->sk = sk;
- INIT_DELAYED_WORK(&conn->timeout_work, sco_sock_timeout);
-
if (parent)
bt_accept_enqueue(parent, sk, true);
}
--
2.33.0
From: Menglong Dong <[email protected]>
[ Upstream commit d25302e46592c97d29f70ccb1be558df31a9a360 ]
Some unfriendly component, such as dpdk, write the same mask to
unbound kworker cpumask again and again. Every time it write to
this interface some work is queue to cpu, even though the mask
is same with the original mask.
So, fix it by return success and do nothing if the cpumask is
equal with the old one.
Signed-off-by: Mengen Sun <[email protected]>
Signed-off-by: Menglong Dong <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/workqueue.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 4cb622b2661b5..d02073b9d56e2 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -5326,9 +5326,6 @@ int workqueue_set_unbound_cpumask(cpumask_var_t cpumask)
int ret = -EINVAL;
cpumask_var_t saved_cpumask;
- if (!zalloc_cpumask_var(&saved_cpumask, GFP_KERNEL))
- return -ENOMEM;
-
/*
* Not excluding isolated cpus on purpose.
* If the user wishes to include them, we allow that.
@@ -5336,6 +5333,15 @@ int workqueue_set_unbound_cpumask(cpumask_var_t cpumask)
cpumask_and(cpumask, cpumask, cpu_possible_mask);
if (!cpumask_empty(cpumask)) {
apply_wqattrs_lock();
+ if (cpumask_equal(cpumask, wq_unbound_cpumask)) {
+ ret = 0;
+ goto out_unlock;
+ }
+
+ if (!zalloc_cpumask_var(&saved_cpumask, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
/* save the old wq_unbound_cpumask. */
cpumask_copy(saved_cpumask, wq_unbound_cpumask);
@@ -5348,10 +5354,11 @@ int workqueue_set_unbound_cpumask(cpumask_var_t cpumask)
if (ret < 0)
cpumask_copy(wq_unbound_cpumask, saved_cpumask);
+ free_cpumask_var(saved_cpumask);
+out_unlock:
apply_wqattrs_unlock();
}
- free_cpumask_var(saved_cpumask);
return ret;
}
--
2.33.0
From: Lasse Collin <[email protected]>
[ Upstream commit 4f8d7abaa413c34da9d751289849dbfb7c977d05 ]
This might matter, for example, if the underlying type of enum xz_check
was a signed char. In such a case the validation wouldn't have caught an
unsupported header. I don't know if this problem can occur in the kernel
on any arch but it's still good to fix it because some people might copy
the XZ code to their own projects from Linux instead of the upstream
XZ Embedded repository.
This change may increase the code size by a few bytes. An alternative
would have been to use an unsigned int instead of enum xz_check but
using an enumeration looks cleaner.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lasse Collin <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/xz/xz_dec_stream.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/lib/xz/xz_dec_stream.c b/lib/xz/xz_dec_stream.c
index 32ab2a08b7cbc..a30e3308035fa 100644
--- a/lib/xz/xz_dec_stream.c
+++ b/lib/xz/xz_dec_stream.c
@@ -402,12 +402,12 @@ static enum xz_ret dec_stream_header(struct xz_dec *s)
* we will accept other check types too, but then the check won't
* be verified and a warning (XZ_UNSUPPORTED_CHECK) will be given.
*/
+ if (s->temp.buf[HEADER_MAGIC_SIZE + 1] > XZ_CHECK_MAX)
+ return XZ_OPTIONS_ERROR;
+
s->check_type = s->temp.buf[HEADER_MAGIC_SIZE + 1];
#ifdef XZ_DEC_ANY_CHECK
- if (s->check_type > XZ_CHECK_MAX)
- return XZ_OPTIONS_ERROR;
-
if (s->check_type > XZ_CHECK_CRC32)
return XZ_UNSUPPORTED_CHECK;
#else
--
2.33.0
From: Jiri Olsa <[email protected]>
[ Upstream commit d4121376ac7a9c81a696d7558789b2f29ef3574e ]
The perf_buffer fails on system with offline cpus:
# test_progs -t perf_buffer
test_perf_buffer:PASS:nr_cpus 0 nsec
test_perf_buffer:PASS:nr_on_cpus 0 nsec
test_perf_buffer:PASS:skel_load 0 nsec
test_perf_buffer:PASS:attach_kprobe 0 nsec
test_perf_buffer:PASS:perf_buf__new 0 nsec
test_perf_buffer:PASS:epoll_fd 0 nsec
skipping offline CPU #24
skipping offline CPU #25
skipping offline CPU #26
skipping offline CPU #27
skipping offline CPU #28
skipping offline CPU #29
skipping offline CPU #30
skipping offline CPU #31
test_perf_buffer:PASS:perf_buffer__poll 0 nsec
test_perf_buffer:PASS:seen_cpu_cnt 0 nsec
test_perf_buffer:FAIL:buf_cnt got 24, expected 32
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Changing the test to check online cpus instead of possible.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/perf_buffer.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/perf_buffer.c b/tools/testing/selftests/bpf/prog_tests/perf_buffer.c
index ca9f0895ec84e..8d75475408f57 100644
--- a/tools/testing/selftests/bpf/prog_tests/perf_buffer.c
+++ b/tools/testing/selftests/bpf/prog_tests/perf_buffer.c
@@ -107,8 +107,8 @@ void test_perf_buffer(void)
"expect %d, seen %d\n", nr_on_cpus, CPU_COUNT(&cpu_seen)))
goto out_free_pb;
- if (CHECK(perf_buffer__buffer_cnt(pb) != nr_cpus, "buf_cnt",
- "got %zu, expected %d\n", perf_buffer__buffer_cnt(pb), nr_cpus))
+ if (CHECK(perf_buffer__buffer_cnt(pb) != nr_on_cpus, "buf_cnt",
+ "got %zu, expected %d\n", perf_buffer__buffer_cnt(pb), nr_on_cpus))
goto out_close;
for (i = 0; i < nr_cpus; i++) {
--
2.33.0
From: Ye Bin <[email protected]>
[ Upstream commit 39fbef4b0f77f9c89c8f014749ca533643a37c9f ]
The following kernel crash can be triggered:
[ 89.266592] ------------[ cut here ]------------
[ 89.267427] kernel BUG at fs/buffer.c:3020!
[ 89.268264] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 89.269116] CPU: 7 PID: 1750 Comm: kmmpd-loop0 Not tainted 5.10.0-862.14.0.6.x86_64-08610-gc932cda3cef4-dirty #20
[ 89.273169] RIP: 0010:submit_bh_wbc.isra.0+0x538/0x6d0
[ 89.277157] RSP: 0018:ffff888105ddfd08 EFLAGS: 00010246
[ 89.278093] RAX: 0000000000000005 RBX: ffff888124231498 RCX: ffffffffb2772612
[ 89.279332] RDX: 1ffff11024846293 RSI: 0000000000000008 RDI: ffff888124231498
[ 89.280591] RBP: ffff8881248cc000 R08: 0000000000000001 R09: ffffed1024846294
[ 89.281851] R10: ffff88812423149f R11: ffffed1024846293 R12: 0000000000003800
[ 89.283095] R13: 0000000000000001 R14: 0000000000000000 R15: ffff8881161f7000
[ 89.284342] FS: 0000000000000000(0000) GS:ffff88839b5c0000(0000) knlGS:0000000000000000
[ 89.285711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 89.286701] CR2: 00007f166ebc01a0 CR3: 0000000435c0e000 CR4: 00000000000006e0
[ 89.287919] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 89.289138] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 89.290368] Call Trace:
[ 89.290842] write_mmp_block+0x2ca/0x510
[ 89.292218] kmmpd+0x433/0x9a0
[ 89.294902] kthread+0x2dd/0x3e0
[ 89.296268] ret_from_fork+0x22/0x30
[ 89.296906] Modules linked in:
by running the following commands:
1. mkfs.ext4 -O mmp /dev/sda -b 1024
2. mount /dev/sda /home/test
3. echo "/dev/sda" > /sys/power/resume
That happens because swsusp_check() calls set_blocksize() on the
target partition which confuses the file system:
Thread1 Thread2
mount /dev/sda /home/test
get s_mmp_bh --> has mapped flag
start kmmpd thread
echo "/dev/sda" > /sys/power/resume
resume_store
software_resume
swsusp_check
set_blocksize
truncate_inode_pages_range
truncate_cleanup_page
block_invalidatepage
discard_buffer --> clean mapped flag
write_mmp_block
submit_bh
submit_bh_wbc
BUG_ON(!buffer_mapped(bh))
To address this issue, modify swsusp_check() to open the target block
device with exclusive access.
Signed-off-by: Ye Bin <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/power/swap.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 72e33054a2e1b..c9126606fa6f4 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -1521,9 +1521,10 @@ end:
int swsusp_check(void)
{
int error;
+ void *holder;
hib_resume_bdev = blkdev_get_by_dev(swsusp_resume_device,
- FMODE_READ, NULL);
+ FMODE_READ | FMODE_EXCL, &holder);
if (!IS_ERR(hib_resume_bdev)) {
set_blocksize(hib_resume_bdev, PAGE_SIZE);
clear_page(swsusp_header);
@@ -1545,7 +1546,7 @@ int swsusp_check(void)
put:
if (error)
- blkdev_put(hib_resume_bdev, FMODE_READ);
+ blkdev_put(hib_resume_bdev, FMODE_READ | FMODE_EXCL);
else
pr_debug("Image signature found, resuming\n");
} else {
--
2.33.0
From: Rajat Asthana <[email protected]>
[ Upstream commit 476db72e521983ecb847e4013b263072bb1110fc ]
Syzkaller reported a warning called "rcu detected stall in dummy_timer".
The error seems to be an error in mceusb_dev_recv(). In the case of
-EPROTO error, the routine immediately resubmits the URB. Instead it
should return without resubmitting URB.
Reported-by: [email protected]
Signed-off-by: Rajat Asthana <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/mceusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 5642595a057ec..8870c4e6c5f44 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1386,6 +1386,7 @@ static void mceusb_dev_recv(struct urb *urb)
case -ECONNRESET:
case -ENOENT:
case -EILSEQ:
+ case -EPROTO:
case -ESHUTDOWN:
usb_unlink_urb(urb);
return;
--
2.33.0
From: Nadezda Lutovinova <[email protected]>
[ Upstream commit fc41665498332ad394b7db37f23e9394096ddc71 ]
If rcsi2_code_to_fmt() return NULL, then null pointer dereference occurs
in the next cycle. That should not be possible now but adding checking
protects from future bugs.
The patch adds checking if format is NULL.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 79f229756805e..d2d87a204e918 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -544,6 +544,8 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv)
/* Code is validated in set_fmt. */
format = rcsi2_code_to_fmt(priv->mf.code);
+ if (!format)
+ return -EINVAL;
/*
* Enable all supported CSI-2 channels with virtual channel and
--
2.33.0
From: Zong-Zhe Yang <[email protected]>
[ Upstream commit c5a8e90730a322f236731fc347dd3afa5db5550e ]
When fw fifo dumps, RX clock gating should be disabled to avoid
something unexpected. However, the register operation ran into
a mistake. So, we fix it.
Signed-off-by: Zong-Zhe Yang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/fw.c | 7 +++----
drivers/net/wireless/realtek/rtw88/reg.h | 1 +
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index 0452630bcfacc..40bcfabd2d214 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -1421,12 +1421,10 @@ static void rtw_fw_read_fifo_page(struct rtw_dev *rtwdev, u32 offset, u32 size,
u32 i;
u16 idx = 0;
u16 ctl;
- u8 rcr;
- rcr = rtw_read8(rtwdev, REG_RCR + 2);
ctl = rtw_read16(rtwdev, REG_PKTBUF_DBG_CTRL) & 0xf000;
/* disable rx clock gate */
- rtw_write8(rtwdev, REG_RCR, rcr | BIT(3));
+ rtw_write32_set(rtwdev, REG_RCR, BIT_DISGCLK);
do {
rtw_write16(rtwdev, REG_PKTBUF_DBG_CTRL, start_pg | ctl);
@@ -1445,7 +1443,8 @@ static void rtw_fw_read_fifo_page(struct rtw_dev *rtwdev, u32 offset, u32 size,
out:
rtw_write16(rtwdev, REG_PKTBUF_DBG_CTRL, ctl);
- rtw_write8(rtwdev, REG_RCR + 2, rcr);
+ /* restore rx clock gate */
+ rtw_write32_clr(rtwdev, REG_RCR, BIT_DISGCLK);
}
static void rtw_fw_read_fifo(struct rtw_dev *rtwdev, enum rtw_fw_fifo_sel sel,
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index aca3dbdc2d5a5..9088bfb2a3157 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -400,6 +400,7 @@
#define BIT_MFBEN BIT(22)
#define BIT_DISCHKPPDLLEN BIT(21)
#define BIT_PKTCTL_DLEN BIT(20)
+#define BIT_DISGCLK BIT(19)
#define BIT_TIM_PARSER_EN BIT(18)
#define BIT_BC_MD_EN BIT(17)
#define BIT_UC_MD_EN BIT(16)
--
2.33.0
From: Anant Thazhemadam <[email protected]>
[ Upstream commit 899a61a3305d49e8a712e9ab20d0db94bde5929f ]
In dibusb_read_eeprom_byte(), if dibusb_i2c_msg() fails, val gets
assigned an value that's not properly initialized.
Using kzalloc() in place of kmalloc() for the buffer fixes this issue,
as the val can now be set to 0 in the event dibusb_i2c_msg() fails.
Reported-by: [email protected]
Tested-by: [email protected]
Signed-off-by: Anant Thazhemadam <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/dibusb-common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c
index 02b51d1a1b67c..aff60c10cb0b2 100644
--- a/drivers/media/usb/dvb-usb/dibusb-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-common.c
@@ -223,7 +223,7 @@ int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val)
u8 *buf;
int rc;
- buf = kmalloc(2, GFP_KERNEL);
+ buf = kzalloc(2, GFP_KERNEL);
if (!buf)
return -ENOMEM;
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit c15b5fc054c3d6c97e953617605235c5cb8ce979 ]
When CONFIG_PRINTK is not set, the CMPXCHG_BUGCHECK() macro calls
_printk(), but _printk() is a static inline function, not available
as an extern.
Since the purpose of the macro is to print the BUGCHECK info,
make this config option depend on PRINTK.
Fixes multiple occurrences of this build error:
../include/linux/printk.h:208:5: error: static declaration of '_printk' follows non-static declaration
208 | int _printk(const char *s, ...)
| ^~~~~~~
In file included from ../arch/ia64/include/asm/cmpxchg.h:5,
../arch/ia64/include/uapi/asm/cmpxchg.h:146:28: note: previous declaration of '_printk' with type 'int(const char *, ...)'
146 | extern int _printk(const char *fmt, ...);
Cc: [email protected]
Cc: Andrew Morton <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Chris Down <[email protected]>
Cc: Paul Gortmaker <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/ia64/Kconfig.debug | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug
index 40ca23bd228d6..2ce008e2d1644 100644
--- a/arch/ia64/Kconfig.debug
+++ b/arch/ia64/Kconfig.debug
@@ -39,7 +39,7 @@ config DISABLE_VHPT
config IA64_DEBUG_CMPXCHG
bool "Turn on compare-and-exchange bug checking (slow!)"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && PRINTK
help
Selecting this option turns on bug checking for the IA-64
compare-and-exchange instructions. This is slow! Itaniums
--
2.33.0
From: Ricardo Ribalda <[email protected]>
[ Upstream commit ea2b9a33711604e91f8c826f4dcb3c12baa1990a ]
bus_info field had a different value for the media entity and the video
device.
Fixes v4l2-compliance:
v4l2-compliance.cpp(637): media bus_info 'PCI:0000:00:05.0' differs from
V4L2 bus_info 'PCI:viewfinder'
Reviewed-by: Bingbu Cao <[email protected]>
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/ipu3/ipu3-v4l2.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
index 7926a777cbc8b..103f84466f6fc 100644
--- a/drivers/staging/media/ipu3/ipu3-v4l2.c
+++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
@@ -592,11 +592,12 @@ static const struct imgu_fmt *find_format(struct v4l2_format *f, u32 type)
static int imgu_vidioc_querycap(struct file *file, void *fh,
struct v4l2_capability *cap)
{
- struct imgu_video_device *node = file_to_intel_imgu_node(file);
+ struct imgu_device *imgu = video_drvdata(file);
strscpy(cap->driver, IMGU_NAME, sizeof(cap->driver));
strscpy(cap->card, IMGU_NAME, sizeof(cap->card));
- snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", node->name);
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
+ pci_name(imgu->pci_dev));
return 0;
}
--
2.33.0
From: Ricardo Ribalda <[email protected]>
[ Upstream commit 553481e38045f349bb9aa596d03bebd020020c9c ]
For a try_fmt call, the node noes not need to be enabled.
Fixes v4l2-compliance
fail: v4l2-test-formats.cpp(717): Video Output Multiplanar is valid, but
no TRY_FMT was implemented
test VIDIOC_TRY_FMT: FAIL
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/ipu3/ipu3-v4l2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
index e0179616a29cf..7926a777cbc8b 100644
--- a/drivers/staging/media/ipu3/ipu3-v4l2.c
+++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
@@ -696,7 +696,7 @@ static int imgu_fmt(struct imgu_device *imgu, unsigned int pipe, int node,
/* CSS expects some format on OUT queue */
if (i != IPU3_CSS_QUEUE_OUT &&
- !imgu_pipe->nodes[inode].enabled) {
+ !imgu_pipe->nodes[inode].enabled && !try) {
fmts[i] = NULL;
continue;
}
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit 49c3eb3036e6359c5c20fe76c611a2c0e0d4710e ]
The Cyberbook T116 tablet contains quite generic names in the sys_vendor
and product_name DMI strings, without this patch brcmfmac will try to load:
"brcmfmac43455-sdio.Default string-Default string.txt" as nvram file which
is way too generic.
The nvram file shipped on the factory Android image contains the exact
same settings as those used on the AcePC T8 mini PC, so point the new
DMI nvram filename quirk to the acepc-t8 nvram file.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
index 6d5188b78f2de..0af452dca7664 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
@@ -75,6 +75,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
},
.driver_data = (void *)&acepc_t8_data,
},
+ {
+ /* Cyberbook T116 rugged tablet */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Default string"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "20170531"),
+ },
+ /* The factory image nvram file is identical to the ACEPC T8 one */
+ .driver_data = (void *)&acepc_t8_data,
+ },
{
/* Match for the GPDwin which unfortunately uses somewhat
* generic dmi strings, which is why we test for 4 strings.
--
2.33.0
From: Eric Biggers <[email protected]>
[ Upstream commit 7f595d6a6cdc336834552069a2e0a4f6d4756ddf ]
fscrypt currently requires a 512-bit master key when AES-256-XTS is
used, since AES-256-XTS keys are 512-bit and fscrypt requires that the
master key be at least as long any key that will be derived from it.
However, this is overly strict because AES-256-XTS doesn't actually have
a 512-bit security strength, but rather 256-bit. The fact that XTS
takes twice the expected key size is a quirk of the XTS mode. It is
sufficient to use 256 bits of entropy for AES-256-XTS, provided that it
is first properly expanded into a 512-bit key, which HKDF-SHA512 does.
Therefore, relax the check of the master key size to use the security
strength of the derived key rather than the size of the derived key
(except for v1 encryption policies, which don't use HKDF).
Besides making things more flexible for userspace, this is needed in
order for the use of a KDF which only takes a 256-bit key to be
introduced into the fscrypt key hierarchy. This will happen with
hardware-wrapped keys support, as all known hardware which supports that
feature uses an SP800-108 KDF using AES-256-CMAC, so the wrapped keys
are wrapped 256-bit AES keys. Moreover, there is interest in fscrypt
supporting the same type of AES-256-CMAC based KDF in software as an
alternative to HKDF-SHA512. There is no security problem with such
features, so fix the key length check to work properly with them.
Reviewed-by: Paul Crowley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/filesystems/fscrypt.rst | 10 ++---
fs/crypto/fscrypt_private.h | 5 ++-
fs/crypto/hkdf.c | 11 ++++--
fs/crypto/keysetup.c | 57 +++++++++++++++++++++------
4 files changed, 61 insertions(+), 22 deletions(-)
diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst
index 44b67ebd6e40d..936fae06db770 100644
--- a/Documentation/filesystems/fscrypt.rst
+++ b/Documentation/filesystems/fscrypt.rst
@@ -176,11 +176,11 @@ Master Keys
Each encrypted directory tree is protected by a *master key*. Master
keys can be up to 64 bytes long, and must be at least as long as the
-greater of the key length needed by the contents and filenames
-encryption modes being used. For example, if AES-256-XTS is used for
-contents encryption, the master key must be 64 bytes (512 bits). Note
-that the XTS mode is defined to require a key twice as long as that
-required by the underlying block cipher.
+greater of the security strength of the contents and filenames
+encryption modes being used. For example, if any AES-256 mode is
+used, the master key must be at least 256 bits, i.e. 32 bytes. A
+stricter requirement applies if the key is used by a v1 encryption
+policy and AES-256-XTS is used; such keys must be 64 bytes.
To "unlock" an encrypted directory tree, userspace must provide the
appropriate master key. There can be any number of master keys, each
diff --git a/fs/crypto/fscrypt_private.h b/fs/crypto/fscrypt_private.h
index 322ecae9a7580..052ad40ecdb28 100644
--- a/fs/crypto/fscrypt_private.h
+++ b/fs/crypto/fscrypt_private.h
@@ -557,8 +557,9 @@ int __init fscrypt_init_keyring(void);
struct fscrypt_mode {
const char *friendly_name;
const char *cipher_str;
- int keysize;
- int ivsize;
+ int keysize; /* key size in bytes */
+ int security_strength; /* security strength in bytes */
+ int ivsize; /* IV size in bytes */
int logged_impl_name;
enum blk_crypto_mode_num blk_crypto_mode;
};
diff --git a/fs/crypto/hkdf.c b/fs/crypto/hkdf.c
index 0cba7928446d3..24172bf3e8c6f 100644
--- a/fs/crypto/hkdf.c
+++ b/fs/crypto/hkdf.c
@@ -16,9 +16,14 @@
/*
* HKDF supports any unkeyed cryptographic hash algorithm, but fscrypt uses
- * SHA-512 because it is reasonably secure and efficient; and since it produces
- * a 64-byte digest, deriving an AES-256-XTS key preserves all 64 bytes of
- * entropy from the master key and requires only one iteration of HKDF-Expand.
+ * SHA-512 because it is well-established, secure, and reasonably efficient.
+ *
+ * HKDF-SHA256 was also considered, as its 256-bit security strength would be
+ * sufficient here. A 512-bit security strength is "nice to have", though.
+ * Also, on 64-bit CPUs, SHA-512 is usually just as fast as SHA-256. In the
+ * common case of deriving an AES-256-XTS key (512 bits), that can result in
+ * HKDF-SHA512 being much faster than HKDF-SHA256, as the longer digest size of
+ * SHA-512 causes HKDF-Expand to only need to do one iteration rather than two.
*/
#define HKDF_HMAC_ALG "hmac(sha512)"
#define HKDF_HASHLEN SHA512_DIGEST_SIZE
diff --git a/fs/crypto/keysetup.c b/fs/crypto/keysetup.c
index 9a6f9a188efb9..73d96e35d9ae4 100644
--- a/fs/crypto/keysetup.c
+++ b/fs/crypto/keysetup.c
@@ -19,6 +19,7 @@ struct fscrypt_mode fscrypt_modes[] = {
.friendly_name = "AES-256-XTS",
.cipher_str = "xts(aes)",
.keysize = 64,
+ .security_strength = 32,
.ivsize = 16,
.blk_crypto_mode = BLK_ENCRYPTION_MODE_AES_256_XTS,
},
@@ -26,12 +27,14 @@ struct fscrypt_mode fscrypt_modes[] = {
.friendly_name = "AES-256-CTS-CBC",
.cipher_str = "cts(cbc(aes))",
.keysize = 32,
+ .security_strength = 32,
.ivsize = 16,
},
[FSCRYPT_MODE_AES_128_CBC] = {
.friendly_name = "AES-128-CBC-ESSIV",
.cipher_str = "essiv(cbc(aes),sha256)",
.keysize = 16,
+ .security_strength = 16,
.ivsize = 16,
.blk_crypto_mode = BLK_ENCRYPTION_MODE_AES_128_CBC_ESSIV,
},
@@ -39,12 +42,14 @@ struct fscrypt_mode fscrypt_modes[] = {
.friendly_name = "AES-128-CTS-CBC",
.cipher_str = "cts(cbc(aes))",
.keysize = 16,
+ .security_strength = 16,
.ivsize = 16,
},
[FSCRYPT_MODE_ADIANTUM] = {
.friendly_name = "Adiantum",
.cipher_str = "adiantum(xchacha12,aes)",
.keysize = 32,
+ .security_strength = 32,
.ivsize = 32,
.blk_crypto_mode = BLK_ENCRYPTION_MODE_ADIANTUM,
},
@@ -357,6 +362,45 @@ static int fscrypt_setup_v2_file_key(struct fscrypt_info *ci,
return 0;
}
+/*
+ * Check whether the size of the given master key (@mk) is appropriate for the
+ * encryption settings which a particular file will use (@ci).
+ *
+ * If the file uses a v1 encryption policy, then the master key must be at least
+ * as long as the derived key, as this is a requirement of the v1 KDF.
+ *
+ * Otherwise, the KDF can accept any size key, so we enforce a slightly looser
+ * requirement: we require that the size of the master key be at least the
+ * maximum security strength of any algorithm whose key will be derived from it
+ * (but in practice we only need to consider @ci->ci_mode, since any other
+ * possible subkeys such as DIRHASH and INODE_HASH will never increase the
+ * required key size over @ci->ci_mode). This allows AES-256-XTS keys to be
+ * derived from a 256-bit master key, which is cryptographically sufficient,
+ * rather than requiring a 512-bit master key which is unnecessarily long. (We
+ * still allow 512-bit master keys if the user chooses to use them, though.)
+ */
+static bool fscrypt_valid_master_key_size(const struct fscrypt_master_key *mk,
+ const struct fscrypt_info *ci)
+{
+ unsigned int min_keysize;
+
+ if (ci->ci_policy.version == FSCRYPT_POLICY_V1)
+ min_keysize = ci->ci_mode->keysize;
+ else
+ min_keysize = ci->ci_mode->security_strength;
+
+ if (mk->mk_secret.size < min_keysize) {
+ fscrypt_warn(NULL,
+ "key with %s %*phN is too short (got %u bytes, need %u+ bytes)",
+ master_key_spec_type(&mk->mk_spec),
+ master_key_spec_len(&mk->mk_spec),
+ (u8 *)&mk->mk_spec.u,
+ mk->mk_secret.size, min_keysize);
+ return false;
+ }
+ return true;
+}
+
/*
* Find the master key, then set up the inode's actual encryption key.
*
@@ -422,18 +466,7 @@ static int setup_file_encryption_key(struct fscrypt_info *ci,
goto out_release_key;
}
- /*
- * Require that the master key be at least as long as the derived key.
- * Otherwise, the derived key cannot possibly contain as much entropy as
- * that required by the encryption mode it will be used for. For v1
- * policies it's also required for the KDF to work at all.
- */
- if (mk->mk_secret.size < ci->ci_mode->keysize) {
- fscrypt_warn(NULL,
- "key with %s %*phN is too short (got %u bytes, need %u+ bytes)",
- master_key_spec_type(&mk_spec),
- master_key_spec_len(&mk_spec), (u8 *)&mk_spec.u,
- mk->mk_secret.size, ci->ci_mode->keysize);
+ if (!fscrypt_valid_master_key_size(mk, ci)) {
err = -ENOKEY;
goto out_release_key;
}
--
2.33.0
From: Tuo Li <[email protected]>
[ Upstream commit 8515965e5e33f4feb56134348c95953f3eadfb26 ]
The variable pdev is assigned to dev->plat_dev, and dev->plat_dev is
checked in:
if (!dev->plat_dev)
This indicates both dev->plat_dev and pdev can be NULL. If so, the
function dev_err() is called to print error information.
dev_err(&pdev->dev, "No platform data specified\n");
However, &pdev->dev is an illegal address, and it is dereferenced in
dev_err().
To fix this possible null-pointer dereference, replace dev_err() with
mfc_err().
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Tuo Li <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s5p-mfc/s5p_mfc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index eba2b9f040df0..c763c0a03140c 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1283,7 +1283,7 @@ static int s5p_mfc_probe(struct platform_device *pdev)
spin_lock_init(&dev->condlock);
dev->plat_dev = pdev;
if (!dev->plat_dev) {
- dev_err(&pdev->dev, "No platform data specified\n");
+ mfc_err("No platform data specified\n");
return -ENODEV;
}
--
2.33.0
From: Nadezda Lutovinova <[email protected]>
[ Upstream commit cdfaf4752e6915a4b455ad4400133e540e4dc965 ]
If of_device_get_match_data() return NULL,
then null pointer dereference occurs in s5p_mfc_init_pm().
The patch adds checking if dev->variant is NULL.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s5p-mfc/s5p_mfc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index c763c0a03140c..f336a95432732 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1288,6 +1288,10 @@ static int s5p_mfc_probe(struct platform_device *pdev)
}
dev->variant = of_device_get_match_data(&pdev->dev);
+ if (!dev->variant) {
+ dev_err(&pdev->dev, "Failed to get device MFC hardware variant information\n");
+ return -ENOENT;
+ }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->regs_base = devm_ioremap_resource(&pdev->dev, res);
--
2.33.0
From: Hannes Reinecke <[email protected]>
[ Upstream commit 2b81a5f015199f3d585ce710190a9e87714d3c1e ]
When reading the partition table on initial scan hits an I/O error the
I/O will hang with the scan_mutex held:
[<0>] do_read_cache_page+0x49b/0x790
[<0>] read_part_sector+0x39/0xe0
[<0>] read_lba+0xf9/0x1d0
[<0>] efi_partition+0xf1/0x7f0
[<0>] bdev_disk_changed+0x1ee/0x550
[<0>] blkdev_get_whole+0x81/0x90
[<0>] blkdev_get_by_dev+0x128/0x2e0
[<0>] device_add_disk+0x377/0x3c0
[<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core]
[<0>] nvme_alloc_ns+0x417/0x950 [nvme_core]
[<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core]
[<0>] nvme_scan_work+0x168/0x310 [nvme_core]
[<0>] process_one_work+0x231/0x420
and trying to delete the controller will deadlock as it tries to grab
the scan mutex:
[<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core]
[<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core]
[<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core]
As we're now properly ordering the namespace list there is no need to
hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore.
And we always need to kick the requeue list as the path will be marked
as unusable and I/O will be requeued _without_ a current path.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/multipath.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 46a1e24ba6f47..18a756444d5a9 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -135,13 +135,12 @@ void nvme_mpath_clear_ctrl_paths(struct nvme_ctrl *ctrl)
{
struct nvme_ns *ns;
- mutex_lock(&ctrl->scan_lock);
down_read(&ctrl->namespaces_rwsem);
- list_for_each_entry(ns, &ctrl->namespaces, list)
- if (nvme_mpath_clear_current_path(ns))
- kblockd_schedule_work(&ns->head->requeue_work);
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ nvme_mpath_clear_current_path(ns);
+ kblockd_schedule_work(&ns->head->requeue_work);
+ }
up_read(&ctrl->namespaces_rwsem);
- mutex_unlock(&ctrl->scan_lock);
}
static bool nvme_path_is_disabled(struct nvme_ns *ns)
--
2.33.0
From: Andrey Grodzovsky <[email protected]>
[ Upstream commit c03509cbc01559549700e14c4a6239f2572ab4ba ]
Add more guards to MMIO access post device
unbind/unplug
Bug: https://bugs.archlinux.org/task/72092?project=1&order=dateopened&sort=desc&pagenum=1
Signed-off-by: Andrey Grodzovsky <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 8 ++++++--
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c | 17 +++++++++++------
2 files changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
index f493b5c3d382b..79bcc78f77045 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
@@ -22,6 +22,7 @@
*/
#include <linux/firmware.h>
+#include <drm/drm_drv.h>
#include "amdgpu.h"
#include "amdgpu_vcn.h"
@@ -192,11 +193,14 @@ static int vcn_v2_0_sw_init(void *handle)
*/
static int vcn_v2_0_sw_fini(void *handle)
{
- int r;
+ int r, idx;
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
volatile struct amdgpu_fw_shared *fw_shared = adev->vcn.inst->fw_shared_cpu_addr;
- fw_shared->present_flag_0 = 0;
+ if (drm_dev_enter(&adev->ddev, &idx)) {
+ fw_shared->present_flag_0 = 0;
+ drm_dev_exit(idx);
+ }
amdgpu_virt_free_mm_table(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
index ce64d4016f903..381839d005db9 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
@@ -22,6 +22,7 @@
*/
#include <linux/firmware.h>
+#include <drm/drm_drv.h>
#include "amdgpu.h"
#include "amdgpu_vcn.h"
@@ -233,17 +234,21 @@ static int vcn_v2_5_sw_init(void *handle)
*/
static int vcn_v2_5_sw_fini(void *handle)
{
- int i, r;
+ int i, r, idx;
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
volatile struct amdgpu_fw_shared *fw_shared;
- for (i = 0; i < adev->vcn.num_vcn_inst; i++) {
- if (adev->vcn.harvest_config & (1 << i))
- continue;
- fw_shared = adev->vcn.inst[i].fw_shared_cpu_addr;
- fw_shared->present_flag_0 = 0;
+ if (drm_dev_enter(&adev->ddev, &idx)) {
+ for (i = 0; i < adev->vcn.num_vcn_inst; i++) {
+ if (adev->vcn.harvest_config & (1 << i))
+ continue;
+ fw_shared = adev->vcn.inst[i].fw_shared_cpu_addr;
+ fw_shared->present_flag_0 = 0;
+ }
+ drm_dev_exit(idx);
}
+
if (amdgpu_sriov_vf(adev))
amdgpu_virt_free_mm_table(adev);
--
2.33.0
From: Josh Don <[email protected]>
[ Upstream commit a130e8fbc7de796eb6e680724d87f4737a26d0ac ]
/proc/uptime reports idle time by reading the CPUTIME_IDLE field from
the per-cpu kcpustats. However, on NO_HZ systems, idle time is not
continually updated on idle cpus, leading this value to appear
incorrectly small.
/proc/stat performs an accounting update when reading idle time; we
can use the same approach for uptime.
With this patch, /proc/stat and /proc/uptime now agree on idle time.
Additionally, the following shows idle time tick up consistently on an
idle machine:
(while true; do cat /proc/uptime; sleep 1; done) | awk '{print $2-prev; prev=$2}'
Reported-by: Luigi Rizzo <[email protected]>
Signed-off-by: Josh Don <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
fs/proc/stat.c | 4 ++--
fs/proc/uptime.c | 14 +++++++++-----
include/linux/kernel_stat.h | 1 +
3 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 4695b6de31512..3bed48d8228b4 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -23,7 +23,7 @@
#ifdef arch_idle_time
-static u64 get_idle_time(struct kernel_cpustat *kcs, int cpu)
+u64 get_idle_time(struct kernel_cpustat *kcs, int cpu)
{
u64 idle;
@@ -45,7 +45,7 @@ static u64 get_iowait_time(struct kernel_cpustat *kcs, int cpu)
#else
-static u64 get_idle_time(struct kernel_cpustat *kcs, int cpu)
+u64 get_idle_time(struct kernel_cpustat *kcs, int cpu)
{
u64 idle, idle_usecs = -1ULL;
diff --git a/fs/proc/uptime.c b/fs/proc/uptime.c
index 5a1b228964fb7..deb99bc9b7e6b 100644
--- a/fs/proc/uptime.c
+++ b/fs/proc/uptime.c
@@ -12,18 +12,22 @@ static int uptime_proc_show(struct seq_file *m, void *v)
{
struct timespec64 uptime;
struct timespec64 idle;
- u64 nsec;
+ u64 idle_nsec;
u32 rem;
int i;
- nsec = 0;
- for_each_possible_cpu(i)
- nsec += (__force u64) kcpustat_cpu(i).cpustat[CPUTIME_IDLE];
+ idle_nsec = 0;
+ for_each_possible_cpu(i) {
+ struct kernel_cpustat kcs;
+
+ kcpustat_cpu_fetch(&kcs, i);
+ idle_nsec += get_idle_time(&kcs, i);
+ }
ktime_get_boottime_ts64(&uptime);
timens_add_boottime(&uptime);
- idle.tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem);
+ idle.tv_sec = div_u64_rem(idle_nsec, NSEC_PER_SEC, &rem);
idle.tv_nsec = rem;
seq_printf(m, "%lu.%02lu %lu.%02lu\n",
(unsigned long) uptime.tv_sec,
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index 89f0745c096d4..8fff3500d50ee 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -103,6 +103,7 @@ extern void account_system_index_time(struct task_struct *, u64,
enum cpu_usage_stat);
extern void account_steal_time(u64);
extern void account_idle_time(u64);
+extern u64 get_idle_time(struct kernel_cpustat *kcs, int cpu);
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
static inline void account_process_tick(struct task_struct *tsk, int user)
--
2.33.0
From: Ricardo Ribalda <[email protected]>
[ Upstream commit ffccdde5f0e17d2f0d788a9d831a027187890eaa ]
The device is doing something unexpected with the control. Either because
the protocol is not properly implemented or there has been a HW error.
Fixes v4l2-compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(448): s_ctrl returned an error (22)
test VIDIOC_G/S_CTRL: FAIL
fail: v4l2-test-controls.cpp(698): s_ext_ctrls returned an error (22)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
Reviewed-by: Hans Verkuil <[email protected]>
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_video.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 5878c78334862..b8477fa93b7d7 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -112,6 +112,11 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
case 5: /* Invalid unit */
case 6: /* Invalid control */
case 7: /* Invalid Request */
+ /*
+ * The firmware has not properly implemented
+ * the control or there has been a HW error.
+ */
+ return -EIO;
case 8: /* Invalid value within range */
return -EINVAL;
default: /* reserved or unknown */
--
2.33.0
From: Evgeny Novikov <[email protected]>
[ Upstream commit e16f5e39acd6d10cc63ae39bc0a77188ed828f22 ]
There were several issues with handling errors in lm3554_probe():
- Probe did not set the error code when v4l2_ctrl_handler_init() failed.
- It intermixed gotos for handling errors of v4l2_ctrl_handler_init()
and media_entity_pads_init().
- It did not set the error code for failures of v4l2_ctrl_new_custom().
- Probe did not free resources in case of failures of
atomisp_register_i2c_module().
The patch fixes all these issues.
Found by Linux Driver Verification project (linuxtesting.org).
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Evgeny Novikov <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../media/atomisp/i2c/atomisp-lm3554.c | 37 ++++++++++++-------
1 file changed, 24 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-lm3554.c b/drivers/staging/media/atomisp/i2c/atomisp-lm3554.c
index 0ab67b2aec671..8739f0874103e 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-lm3554.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-lm3554.c
@@ -836,7 +836,6 @@ static int lm3554_probe(struct i2c_client *client)
int err = 0;
struct lm3554 *flash;
unsigned int i;
- int ret;
flash = kzalloc(sizeof(*flash), GFP_KERNEL);
if (!flash)
@@ -845,7 +844,7 @@ static int lm3554_probe(struct i2c_client *client)
flash->pdata = lm3554_platform_data_func(client);
if (IS_ERR(flash->pdata)) {
err = PTR_ERR(flash->pdata);
- goto fail1;
+ goto free_flash;
}
v4l2_i2c_subdev_init(&flash->sd, client, &lm3554_ops);
@@ -853,12 +852,12 @@ static int lm3554_probe(struct i2c_client *client)
flash->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
flash->mode = ATOMISP_FLASH_MODE_OFF;
flash->timeout = LM3554_MAX_TIMEOUT / LM3554_TIMEOUT_STEPSIZE - 1;
- ret =
+ err =
v4l2_ctrl_handler_init(&flash->ctrl_handler,
ARRAY_SIZE(lm3554_controls));
- if (ret) {
+ if (err) {
dev_err(&client->dev, "error initialize a ctrl_handler.\n");
- goto fail3;
+ goto unregister_subdev;
}
for (i = 0; i < ARRAY_SIZE(lm3554_controls); i++)
@@ -867,14 +866,15 @@ static int lm3554_probe(struct i2c_client *client)
if (flash->ctrl_handler.error) {
dev_err(&client->dev, "ctrl_handler error.\n");
- goto fail3;
+ err = flash->ctrl_handler.error;
+ goto free_handler;
}
flash->sd.ctrl_handler = &flash->ctrl_handler;
err = media_entity_pads_init(&flash->sd.entity, 0, NULL);
if (err) {
dev_err(&client->dev, "error initialize a media entity.\n");
- goto fail2;
+ goto free_handler;
}
flash->sd.entity.function = MEDIA_ENT_F_FLASH;
@@ -885,16 +885,27 @@ static int lm3554_probe(struct i2c_client *client)
err = lm3554_gpio_init(client);
if (err) {
- dev_err(&client->dev, "gpio request/direction_output fail");
- goto fail3;
+ dev_err(&client->dev, "gpio request/direction_output fail.\n");
+ goto cleanup_media;
+ }
+
+ err = atomisp_register_i2c_module(&flash->sd, NULL, LED_FLASH);
+ if (err) {
+ dev_err(&client->dev, "fail to register atomisp i2c module.\n");
+ goto uninit_gpio;
}
- return atomisp_register_i2c_module(&flash->sd, NULL, LED_FLASH);
-fail3:
+
+ return 0;
+
+uninit_gpio:
+ lm3554_gpio_uninit(client);
+cleanup_media:
media_entity_cleanup(&flash->sd.entity);
+free_handler:
v4l2_ctrl_handler_free(&flash->ctrl_handler);
-fail2:
+unregister_subdev:
v4l2_device_unregister_subdev(&flash->sd);
-fail1:
+free_flash:
kfree(flash);
return err;
--
2.33.0
From: Martin Kepplinger <[email protected]>
[ Upstream commit 6d0d779b212c27293d9ccb4da092ff0ccb6efa39 ]
Some tools like v4l2-compliance let users select a media device based
on the bus_info string which can be quite convenient. Use a unique
string for that.
This also fixes the following v4l2-compliance warning:
warn: v4l2-test-media.cpp(52): empty bus_info
Signed-off-by: Martin Kepplinger <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/imx/imx-media-dev-common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/staging/media/imx/imx-media-dev-common.c b/drivers/staging/media/imx/imx-media-dev-common.c
index 5fe4b22ab8473..7e0d769566bdd 100644
--- a/drivers/staging/media/imx/imx-media-dev-common.c
+++ b/drivers/staging/media/imx/imx-media-dev-common.c
@@ -363,6 +363,8 @@ struct imx_media_dev *imx_media_dev_init(struct device *dev,
imxmd->v4l2_dev.notify = imx_media_notify;
strscpy(imxmd->v4l2_dev.name, "imx-media",
sizeof(imxmd->v4l2_dev.name));
+ snprintf(imxmd->md.bus_info, sizeof(imxmd->md.bus_info),
+ "platform:%s", dev_name(imxmd->md.dev));
media_device_init(&imxmd->md);
--
2.33.0
From: Ricardo Ribalda <[email protected]>
[ Upstream commit 97a2777a96070afb7da5d587834086c0b586c8cc ]
Fixes v4l2-compliance:
Format ioctls (Input 0):
warn: v4l2-test-formats.cpp(1339): S_PARM is supported but doesn't report V4L2_CAP_TIMEPERFRAME
fail: v4l2-test-formats.cpp(1241): node->has_frmintervals && !cap->capability
Reviewed-by: Hans Verkuil <[email protected]>
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_v4l2.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index 5f0e2fa69da5c..753b8a99e08fc 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -471,10 +471,13 @@ static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
uvc_simplify_fraction(&timeperframe.numerator,
&timeperframe.denominator, 8, 333);
- if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
parm->parm.capture.timeperframe = timeperframe;
- else
+ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
+ } else {
parm->parm.output.timeperframe = timeperframe;
+ parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME;
+ }
return 0;
}
--
2.33.0
From: Zhang Yi <[email protected]>
commit d0e36a62bd4c60c09acc40e06ba4831a4d0bc75b upstream.
Fix the error path in free_dqentry(), pass out the error number if the
block to free is not correct.
Fixes: 1ccd14b9c271 ("quota: Split off quota tree handling into a separate file")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Zhang Yi <[email protected]>
Cc: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/quota/quota_tree.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/quota/quota_tree.c
+++ b/fs/quota/quota_tree.c
@@ -423,6 +423,7 @@ static int free_dqentry(struct qtree_mem
quota_error(dquot->dq_sb, "Quota structure has offset to "
"other block (%u) than it should (%u)", blk,
(uint)(dquot->dq_off >> info->dqi_blocksize_bits));
+ ret = -EIO;
goto out_buf;
}
ret = read_blk(info, blk, buf);
From: Zhang Yi <[email protected]>
commit 9bf3d20331295b1ecb81f4ed9ef358c51699a050 upstream.
The block number in the quota tree on disk should be smaller than the
v2_disk_dqinfo.dqi_blocks. If the quota file was corrupted, we may be
allocating an 'allocated' block and that would lead to a loop in a tree,
which will probably trigger oops later. This patch adds a check for the
block number in the quota tree to prevent such potential issue.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Zhang Yi <[email protected]>
Cc: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/quota/quota_tree.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/fs/quota/quota_tree.c
+++ b/fs/quota/quota_tree.c
@@ -488,6 +488,13 @@ static int remove_tree(struct qtree_mem_
goto out_buf;
}
newblk = le32_to_cpu(ref[get_index(info, dquot->dq_id, depth)]);
+ if (newblk < QT_TREEOFF || newblk >= info->dqi_blocks) {
+ quota_error(dquot->dq_sb, "Getting block too big (%u >= %u)",
+ newblk, info->dqi_blocks);
+ ret = -EUCLEAN;
+ goto out_buf;
+ }
+
if (depth == info->dqi_qtree_depth - 1) {
ret = free_dqentry(info, dquot, newblk);
newblk = 0;
@@ -587,6 +594,13 @@ static loff_t find_tree_dqentry(struct q
blk = le32_to_cpu(ref[get_index(info, dquot->dq_id, depth)]);
if (!blk) /* No reference? */
goto out_buf;
+ if (blk < QT_TREEOFF || blk >= info->dqi_blocks) {
+ quota_error(dquot->dq_sb, "Getting block too big (%u >= %u)",
+ blk, info->dqi_blocks);
+ ret = -EUCLEAN;
+ goto out_buf;
+ }
+
if (depth < info->dqi_qtree_depth - 1)
ret = find_tree_dqentry(info, dquot, blk, depth+1);
else
From: Pali Rohár <[email protected]>
commit 84e1b4045dc887b78bdc87d92927093dc3a465aa upstream.
Aardvark controller has something like config space of a Root Port
available at offset 0x0 of internal registers - these registers are used
for implementation of the emulated bridge.
The default value of Class Code of this bridge corresponds to a RAID Mass
storage controller, though. (This is probably intended for when the
controller is used as Endpoint.)
Change the Class Code to correspond to a PCI Bridge.
Add comment explaining this change.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -560,6 +560,26 @@ static void advk_pcie_setup_hw(struct ad
reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
advk_writel(pcie, reg, VENDOR_ID_REG);
+ /*
+ * Change Class Code of PCI Bridge device to PCI Bridge (0x600400),
+ * because the default value is Mass storage controller (0x010400).
+ *
+ * Note that this Aardvark PCI Bridge does not have compliant Type 1
+ * Configuration Space and it even cannot be accessed via Aardvark's
+ * PCI config space access method. Something like config space is
+ * available in internal Aardvark registers starting at offset 0x0
+ * and is reported as Type 0. In range 0x10 - 0x34 it has totally
+ * different registers.
+ *
+ * Therefore driver uses emulation of PCI Bridge which emulates
+ * access to configuration space via internal Aardvark registers or
+ * emulated configuration buffer.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_DEV_REV_REG);
+ reg &= ~0xffffff00;
+ reg |= (PCI_CLASS_BRIDGE_PCI << 8) << 8;
+ advk_writel(pcie, reg, PCIE_CORE_DEV_REV_REG);
+
/* Disable Root Bridge I/O space, memory space and bus mastering */
reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
From: Pali Rohár <[email protected]>
commit 239edf686c14a9ff926dec2f350289ed7adfefe2 upstream.
This register is exported at address offset 0x30.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -31,6 +31,7 @@
#define PCIE_CORE_DEV_ID_REG 0x0
#define PCIE_CORE_CMD_STATUS_REG 0x4
#define PCIE_CORE_DEV_REV_REG 0x8
+#define PCIE_CORE_EXP_ROM_BAR_REG 0x30
#define PCIE_CORE_PCIEXP_CAP 0xc0
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
@@ -813,6 +814,10 @@ advk_pci_bridge_emul_base_conf_read(stru
*value = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
return PCI_BRIDGE_EMUL_HANDLED;
+ case PCI_ROM_ADDRESS1:
+ *value = advk_readl(pcie, PCIE_CORE_EXP_ROM_BAR_REG);
+ return PCI_BRIDGE_EMUL_HANDLED;
+
case PCI_INTERRUPT_LINE: {
/*
* From the whole 32bit register we support reading from HW only
@@ -845,6 +850,10 @@ advk_pci_bridge_emul_base_conf_write(str
advk_writel(pcie, new, PCIE_CORE_CMD_STATUS_REG);
break;
+ case PCI_ROM_ADDRESS1:
+ advk_writel(pcie, new, PCIE_CORE_EXP_ROM_BAR_REG);
+ break;
+
case PCI_INTERRUPT_LINE:
if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
u32 val = advk_readl(pcie, PCIE_CORE_CTRL1_REG);
From: Paul E. McKenney <[email protected]>
[ Upstream commit 0db7c32ad3160ae06f497d48a74bd46a2a35e6bf ]
Early in debugging, it made some sense to differentiate the first
iteration from subsequent iterations, but now this just causes confusion.
This commit therefore moves the "set_tasks_gp_state(rtp, RTGS_WAIT_CBS)"
statement to the beginning of the "for" loop in rcu_tasks_kthread().
Reported-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/tasks.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index b338f514ee5aa..7c05c5ab78653 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -197,6 +197,7 @@ static int __noreturn rcu_tasks_kthread(void *arg)
* This loop is terminated by the system going down. ;-)
*/
for (;;) {
+ set_tasks_gp_state(rtp, RTGS_WAIT_CBS);
/* Pick up any new callbacks. */
raw_spin_lock_irqsave(&rtp->cbs_lock, flags);
@@ -236,8 +237,6 @@ static int __noreturn rcu_tasks_kthread(void *arg)
}
/* Paranoid sleep to keep this from entering a tight loop */
schedule_timeout_idle(rtp->gp_sleep);
-
- set_tasks_gp_state(rtp, RTGS_WAIT_CBS);
}
}
--
2.33.0
From: Seevalamuthu Mariappan <[email protected]>
[ Upstream commit feab5bb8f1d4621025dceae7eef62d5f92de34ac ]
pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed
at the beginning. This causes invalid values in survey dump. Hence, align
the structure with the firmware.
Note: The firmware releases follow this order since the feature was
implemented. Also, it is not changing across the branches including
QCA6390.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ritesh Singh <[email protected]>
Signed-off-by: Seevalamuthu Mariappan <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.c | 1 +
drivers/net/wireless/ath/ath11k/wmi.h | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index eca86225a3413..fca71e00123d9 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1333,6 +1333,7 @@ int ath11k_wmi_pdev_bss_chan_info_request(struct ath11k *ar,
WMI_TAG_PDEV_BSS_CHAN_INFO_REQUEST) |
FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
cmd->req_type = type;
+ cmd->pdev_id = ar->pdev->pdev_id;
ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
"WMI bss chan info req type %d\n", type);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 5a32ba0eb4f57..c47adaab7918b 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2935,6 +2935,7 @@ struct wmi_pdev_bss_chan_info_req_cmd {
u32 tlv_header;
/* ref wmi_bss_chan_info_req_type */
u32 req_type;
+ u32 pdev_id;
} __packed;
struct wmi_ap_ps_peer_cmd {
@@ -4028,7 +4029,6 @@ struct wmi_vdev_stopped_event {
} __packed;
struct wmi_pdev_bss_chan_info_event {
- u32 pdev_id;
u32 freq; /* Units in MHz */
u32 noise_floor; /* units are dBm */
/* rx clear - how often the channel was unused */
@@ -4046,6 +4046,7 @@ struct wmi_pdev_bss_chan_info_event {
/*rx_cycle cnt for my bss in 64bits format */
u32 rx_bss_cycle_count_low;
u32 rx_bss_cycle_count_high;
+ u32 pdev_id;
} __packed;
#define WMI_VDEV_INSTALL_KEY_COMPL_STATUS_SUCCESS 0
--
2.33.0
From: Peter Zijlstra <[email protected]>
[ Upstream commit 7fae4c24a2b84a66c7be399727aca11e7a888462 ]
It turns out that a single page of stack is trivial to overflow with
all the tracing gunk enabled. Raise the exception stacks to 2 pages,
which is still half the interrupt stacks, which are at 4 pages.
Reported-by: Michael Wang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/page_64_types.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 3f49dac03617d..224d71aef6303 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -15,7 +15,7 @@
#define THREAD_SIZE_ORDER (2 + KASAN_STACK_ORDER)
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
-#define EXCEPTION_STACK_ORDER (0 + KASAN_STACK_ORDER)
+#define EXCEPTION_STACK_ORDER (1 + KASAN_STACK_ORDER)
#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
#define IRQ_STACK_ORDER (2 + KASAN_STACK_ORDER)
--
2.33.0
From: Pawan Gupta <[email protected]>
[ Upstream commit 0817534ff9ea809fac1322c5c8c574be8483ea57 ]
Syzkaller reported use-after-free bug as described in [1]. The bug is
triggered when smk_set_cipso() tries to free stale category bitmaps
while there are concurrent reader(s) using the same bitmaps.
Wait for RCU grace period to finish before freeing the category bitmaps
in smk_set_cipso(). This makes sure that there are no more readers using
the stale bitmaps and freeing them should be safe.
[1] https://lore.kernel.org/netdev/[email protected]/
Reported-by: [email protected]
Signed-off-by: Pawan Gupta <[email protected]>
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smackfs.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index b88c1a9538334..e33f98d25fc02 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -831,6 +831,7 @@ static int smk_open_cipso(struct inode *inode, struct file *file)
static ssize_t smk_set_cipso(struct file *file, const char __user *buf,
size_t count, loff_t *ppos, int format)
{
+ struct netlbl_lsm_catmap *old_cat;
struct smack_known *skp;
struct netlbl_lsm_secattr ncats;
char mapcatset[SMK_CIPSOLEN];
@@ -920,9 +921,11 @@ static ssize_t smk_set_cipso(struct file *file, const char __user *buf,
rc = smk_netlbl_mls(maplevel, mapcatset, &ncats, SMK_CIPSOLEN);
if (rc >= 0) {
- netlbl_catmap_free(skp->smk_netlabel.attr.mls.cat);
+ old_cat = skp->smk_netlabel.attr.mls.cat;
skp->smk_netlabel.attr.mls.cat = ncats.attr.mls.cat;
skp->smk_netlabel.attr.mls.lvl = ncats.attr.mls.lvl;
+ synchronize_rcu();
+ netlbl_catmap_free(old_cat);
rc = count;
/*
* This mapping may have been cached, so clear the cache.
--
2.33.0
From: Pali Rohár <[email protected]>
commit 661c399a651c11aaf83c45cbfe0b4a1fb7bc3179 upstream.
Current implementation of advk_pcie_link_up() is wrong as it marks also
link disabled or hot reset states as link up.
Fix it by marking link up only to those states which are defined in PCIe
Base specification 3.0, Table 4-14: Link Status Mapped to the LTSSM.
To simplify implementation, Define macros for every LTSSM state which
aardvark hardware can return in CFG_REG register.
Fix also checking for link training according to the same Table 4-14.
Define a new function advk_pcie_link_training() for this purpose.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected]
Cc: Remi Pommarel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 76 +++++++++++++++++++++++++++++++---
1 file changed, 70 insertions(+), 6 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -163,8 +163,50 @@
#define CFG_REG (LMI_BASE_ADDR + 0x0)
#define LTSSM_SHIFT 24
#define LTSSM_MASK 0x3f
-#define LTSSM_L0 0x10
#define RC_BAR_CONFIG 0x300
+
+/* LTSSM values in CFG_REG */
+enum {
+ LTSSM_DETECT_QUIET = 0x0,
+ LTSSM_DETECT_ACTIVE = 0x1,
+ LTSSM_POLLING_ACTIVE = 0x2,
+ LTSSM_POLLING_COMPLIANCE = 0x3,
+ LTSSM_POLLING_CONFIGURATION = 0x4,
+ LTSSM_CONFIG_LINKWIDTH_START = 0x5,
+ LTSSM_CONFIG_LINKWIDTH_ACCEPT = 0x6,
+ LTSSM_CONFIG_LANENUM_ACCEPT = 0x7,
+ LTSSM_CONFIG_LANENUM_WAIT = 0x8,
+ LTSSM_CONFIG_COMPLETE = 0x9,
+ LTSSM_CONFIG_IDLE = 0xa,
+ LTSSM_RECOVERY_RCVR_LOCK = 0xb,
+ LTSSM_RECOVERY_SPEED = 0xc,
+ LTSSM_RECOVERY_RCVR_CFG = 0xd,
+ LTSSM_RECOVERY_IDLE = 0xe,
+ LTSSM_L0 = 0x10,
+ LTSSM_RX_L0S_ENTRY = 0x11,
+ LTSSM_RX_L0S_IDLE = 0x12,
+ LTSSM_RX_L0S_FTS = 0x13,
+ LTSSM_TX_L0S_ENTRY = 0x14,
+ LTSSM_TX_L0S_IDLE = 0x15,
+ LTSSM_TX_L0S_FTS = 0x16,
+ LTSSM_L1_ENTRY = 0x17,
+ LTSSM_L1_IDLE = 0x18,
+ LTSSM_L2_IDLE = 0x19,
+ LTSSM_L2_TRANSMIT_WAKE = 0x1a,
+ LTSSM_DISABLED = 0x20,
+ LTSSM_LOOPBACK_ENTRY_MASTER = 0x21,
+ LTSSM_LOOPBACK_ACTIVE_MASTER = 0x22,
+ LTSSM_LOOPBACK_EXIT_MASTER = 0x23,
+ LTSSM_LOOPBACK_ENTRY_SLAVE = 0x24,
+ LTSSM_LOOPBACK_ACTIVE_SLAVE = 0x25,
+ LTSSM_LOOPBACK_EXIT_SLAVE = 0x26,
+ LTSSM_HOT_RESET = 0x27,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE0 = 0x28,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE1 = 0x29,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE2 = 0x2a,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE3 = 0x2b,
+};
+
#define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
/* PCIe core controller registers */
@@ -269,13 +311,35 @@ static inline u16 advk_read16(struct adv
return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
}
-static int advk_pcie_link_up(struct advk_pcie *pcie)
+static u8 advk_pcie_ltssm_state(struct advk_pcie *pcie)
{
- u32 val, ltssm_state;
+ u32 val;
+ u8 ltssm_state;
val = advk_readl(pcie, CFG_REG);
ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
- return ltssm_state >= LTSSM_L0;
+ return ltssm_state;
+}
+
+static inline bool advk_pcie_link_up(struct advk_pcie *pcie)
+{
+ /* check if LTSSM is in normal operation - some L* state */
+ u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+ return ltssm_state >= LTSSM_L0 && ltssm_state < LTSSM_DISABLED;
+}
+
+static inline bool advk_pcie_link_training(struct advk_pcie *pcie)
+{
+ /*
+ * According to PCIe Base specification 3.0, Table 4-14: Link
+ * Status Mapped to the LTSSM is Link Training mapped to LTSSM
+ * Configuration and Recovery states.
+ */
+ u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+ return ((ltssm_state >= LTSSM_CONFIG_LINKWIDTH_START &&
+ ltssm_state < LTSSM_L0) ||
+ (ltssm_state >= LTSSM_RECOVERY_EQUALIZATION_PHASE0 &&
+ ltssm_state <= LTSSM_RECOVERY_EQUALIZATION_PHASE3));
}
static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
@@ -298,7 +362,7 @@ static void advk_pcie_wait_for_retrain(s
size_t retries;
for (retries = 0; retries < RETRAIN_WAIT_MAX_RETRIES; ++retries) {
- if (!advk_pcie_link_up(pcie))
+ if (advk_pcie_link_training(pcie))
break;
udelay(RETRAIN_WAIT_USLEEP_US);
}
@@ -738,7 +802,7 @@ advk_pci_bridge_emul_pcie_conf_read(stru
/* u32 contains both PCI_EXP_LNKCTL and PCI_EXP_LNKSTA */
u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg) &
~(PCI_EXP_LNKSTA_LT << 16);
- if (!advk_pcie_link_up(pcie))
+ if (advk_pcie_link_training(pcie))
val |= (PCI_EXP_LNKSTA_LT << 16);
*value = val;
return PCI_BRIDGE_EMUL_HANDLED;
From: Li Chen <[email protected]>
commit 27cd7e3c9bb1ae13bc16f08138edd6e4df3cd211 upstream.
When cdns_plat_pcie_probe() succeeds, return success instead of falling
into the error handling code.
Fixes: bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library")
Link: https://lore.kernel.org/r/DM6PR19MB40271B93057D949310F0B0EDA0BF9@DM6PR19MB4027.namprd19.prod.outlook.com
Signed-off-by: Xuliang Zhang <[email protected]>
Signed-off-by: Li Chen <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/cadence/pcie-cadence-plat.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pci/controller/cadence/pcie-cadence-plat.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-plat.c
@@ -127,6 +127,8 @@ static int cdns_plat_pcie_probe(struct p
goto err_init;
}
+ return 0;
+
err_init:
err_get_sync:
pm_runtime_put_sync(dev);
From: Pali Rohár <[email protected]>
commit 2b650b7ff20eb7ea8ef9031d20fb657286ab90cc upstream.
Add support for reporting PCI_EXP_LNKSTA_DLLLA bit in Link Control register
on emulated bridge via current LTSSM state. Also correctly indicate DLLLA
capability via PCI_EXP_LNKCAP_DLLLARC bit in Link Control Capability
register.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -328,6 +328,20 @@ static inline bool advk_pcie_link_up(str
return ltssm_state >= LTSSM_L0 && ltssm_state < LTSSM_DISABLED;
}
+static inline bool advk_pcie_link_active(struct advk_pcie *pcie)
+{
+ /*
+ * According to PCIe Base specification 3.0, Table 4-14: Link
+ * Status Mapped to the LTSSM, and 4.2.6.3.6 Configuration.Idle
+ * is Link Up mapped to LTSSM Configuration.Idle, Recovery, L0,
+ * L0s, L1 and L2 states. And according to 3.2.1. Data Link
+ * Control and Management State Machine Rules is DL Up status
+ * reported in DL Active state.
+ */
+ u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+ return ltssm_state >= LTSSM_CONFIG_IDLE && ltssm_state < LTSSM_DISABLED;
+}
+
static inline bool advk_pcie_link_training(struct advk_pcie *pcie)
{
/*
@@ -798,12 +812,26 @@ advk_pci_bridge_emul_pcie_conf_read(stru
return PCI_BRIDGE_EMUL_HANDLED;
}
+ case PCI_EXP_LNKCAP: {
+ u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
+ /*
+ * PCI_EXP_LNKCAP_DLLLARC bit is hardwired in aardvark HW to 0.
+ * But support for PCI_EXP_LNKSTA_DLLLA is emulated via ltssm
+ * state so explicitly enable PCI_EXP_LNKCAP_DLLLARC flag.
+ */
+ val |= PCI_EXP_LNKCAP_DLLLARC;
+ *value = val;
+ return PCI_BRIDGE_EMUL_HANDLED;
+ }
+
case PCI_EXP_LNKCTL: {
/* u32 contains both PCI_EXP_LNKCTL and PCI_EXP_LNKSTA */
u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg) &
~(PCI_EXP_LNKSTA_LT << 16);
if (advk_pcie_link_training(pcie))
val |= (PCI_EXP_LNKSTA_LT << 16);
+ if (advk_pcie_link_active(pcie))
+ val |= (PCI_EXP_LNKSTA_DLLLA << 16);
*value = val;
return PCI_BRIDGE_EMUL_HANDLED;
}
@@ -811,7 +839,6 @@ advk_pci_bridge_emul_pcie_conf_read(stru
case PCI_CAP_LIST_ID:
case PCI_EXP_DEVCAP:
case PCI_EXP_DEVCTL:
- case PCI_EXP_LNKCAP:
*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
return PCI_BRIDGE_EMUL_HANDLED;
default:
From: Pali Rohár <[email protected]>
commit a7ca6d7fa3c02c032db5440ff392d96c04684c21 upstream.
The PCIE_ISR1_REG says which interrupts are currently set / active,
including those which are masked.
The driver currently reads this register and looks if some unmasked
interrupts are active, and if not, it clears status bits of _all_
interrupts, including the masked ones.
This is incorrect, since, for example, some drivers may poll these bits.
Remove this clearing, and also remove this early return statement
completely, since it does not change functionality in any way.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1286,12 +1286,6 @@ static void advk_pcie_handle_int(struct
isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
- if (!isr0_status && !isr1_status) {
- advk_writel(pcie, isr0_val, PCIE_ISR0_REG);
- advk_writel(pcie, isr1_val, PCIE_ISR1_REG);
- return;
- }
-
/* Process MSI interrupts */
if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
advk_pcie_handle_msi(pcie);
From: Marek Behún <[email protected]>
commit 7a41ae80bdcb17e14dd7d83239b8a0cf368f18be upstream.
The pci_bridge_emul_conf_write() function correctly clears W1C bits in
cfgspace cache, but it does not inform the underlying implementation
about the clear request: the .write_op() method is given the value with
these bits cleared.
This is wrong if the .write_op() needs to know which bits were requested
to be cleared.
Fix the value to be passed into the .write_op() method to have requested
W1C bits set, so that it can clear them.
Both pci-bridge-emul users (mvebu and aardvark) are compatible with this
change.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Cc: Russell King <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -431,8 +431,21 @@ int pci_bridge_emul_conf_write(struct pc
/* Clear the W1C bits */
new &= ~((value << shift) & (behavior[reg / 4].w1c & mask));
+ /* Save the new value with the cleared W1C bits into the cfgspace */
cfgspace[reg / 4] = cpu_to_le32(new);
+ /*
+ * Clear the W1C bits not specified by the write mask, so that the
+ * write_op() does not clear them.
+ */
+ new &= ~(behavior[reg / 4].w1c & ~mask);
+
+ /*
+ * Set the W1C bits specified by the write mask, so that write_op()
+ * knows about that they are to be cleared.
+ */
+ new |= (value << shift) & (behavior[reg / 4].w1c & mask);
+
if (write_op)
write_op(bridge, reg, old, new, mask);
From: Juergen Gross <[email protected]>
commit 40fdea0284bb20814399da0484a658a96c735d90 upstream.
When running as PVH or HVM guest with actual memory < max memory the
hypervisor is using "populate on demand" in order to allow the guest
to balloon down from its maximum memory size. For this to work
correctly the guest must not touch more memory pages than its target
memory size as otherwise the PoD cache will be exhausted and the guest
is crashed as a result of that.
In extreme cases ballooning down might not be finished today before
the init process is started, which can consume lots of memory.
In order to avoid random boot crashes in such cases, add a late init
call to wait for ballooning down having finished for PVH/HVM guests.
Warn on console if initial ballooning fails, panic() after stalling
for more than 3 minutes per default. Add a module parameter for
changing this timeout.
[boris: replaced pr_info() with pr_notice()]
Cc: <[email protected]>
Reported-by: Marek Marczykowski-Górecki <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/kernel-parameters.txt | 7 +
drivers/xen/balloon.c | 86 +++++++++++++++++-------
2 files changed, 70 insertions(+), 23 deletions(-)
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5988,6 +5988,13 @@
improve timer resolution at the expense of processing
more timer interrupts.
+ xen.balloon_boot_timeout= [XEN]
+ The time (in seconds) to wait before giving up to boot
+ in case initial ballooning fails to free enough memory.
+ Applies only when running as HVM or PVH guest and
+ started with less memory configured than allowed at
+ max. Default is 180.
+
xen.event_eoi_delay= [XEN]
How long to delay EOI handling in case of event
storms (jiffies). Default is 10.
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -58,6 +58,7 @@
#include <linux/percpu-defs.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
+#include <linux/moduleparam.h>
#include <asm/page.h>
#include <asm/tlb.h>
@@ -73,6 +74,12 @@
#include <xen/page.h>
#include <xen/mem-reservation.h>
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "xen."
+
+static uint __read_mostly balloon_boot_timeout = 180;
+module_param(balloon_boot_timeout, uint, 0444);
+
static int xen_hotplug_unpopulated;
#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
@@ -125,12 +132,12 @@ static struct ctl_table xen_root[] = {
* BP_ECANCELED: error, balloon operation canceled.
*/
-enum bp_state {
+static enum bp_state {
BP_DONE,
BP_WAIT,
BP_EAGAIN,
BP_ECANCELED
-};
+} balloon_state = BP_DONE;
/* Main waiting point for xen-balloon thread. */
static DECLARE_WAIT_QUEUE_HEAD(balloon_thread_wq);
@@ -199,18 +206,15 @@ static struct page *balloon_next_page(st
return list_entry(next, struct page, lru);
}
-static enum bp_state update_schedule(enum bp_state state)
+static void update_schedule(void)
{
- if (state == BP_WAIT)
- return BP_WAIT;
-
- if (state == BP_ECANCELED)
- return BP_ECANCELED;
+ if (balloon_state == BP_WAIT || balloon_state == BP_ECANCELED)
+ return;
- if (state == BP_DONE) {
+ if (balloon_state == BP_DONE) {
balloon_stats.schedule_delay = 1;
balloon_stats.retry_count = 1;
- return BP_DONE;
+ return;
}
++balloon_stats.retry_count;
@@ -219,7 +223,8 @@ static enum bp_state update_schedule(enu
balloon_stats.retry_count > balloon_stats.max_retry_count) {
balloon_stats.schedule_delay = 1;
balloon_stats.retry_count = 1;
- return BP_ECANCELED;
+ balloon_state = BP_ECANCELED;
+ return;
}
balloon_stats.schedule_delay <<= 1;
@@ -227,7 +232,7 @@ static enum bp_state update_schedule(enu
if (balloon_stats.schedule_delay > balloon_stats.max_schedule_delay)
balloon_stats.schedule_delay = balloon_stats.max_schedule_delay;
- return BP_EAGAIN;
+ balloon_state = BP_EAGAIN;
}
#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
@@ -494,9 +499,9 @@ static enum bp_state decrease_reservatio
* Stop waiting if either state is BP_DONE and ballooning action is
* needed, or if the credit has changed while state is not BP_DONE.
*/
-static bool balloon_thread_cond(enum bp_state state, long credit)
+static bool balloon_thread_cond(long credit)
{
- if (state == BP_DONE)
+ if (balloon_state == BP_DONE)
credit = 0;
return current_credit() != credit || kthread_should_stop();
@@ -510,13 +515,12 @@ static bool balloon_thread_cond(enum bp_
*/
static int balloon_thread(void *unused)
{
- enum bp_state state = BP_DONE;
long credit;
unsigned long timeout;
set_freezable();
for (;;) {
- switch (state) {
+ switch (balloon_state) {
case BP_DONE:
case BP_ECANCELED:
timeout = 3600 * HZ;
@@ -532,7 +536,7 @@ static int balloon_thread(void *unused)
credit = current_credit();
wait_event_freezable_timeout(balloon_thread_wq,
- balloon_thread_cond(state, credit), timeout);
+ balloon_thread_cond(credit), timeout);
if (kthread_should_stop())
return 0;
@@ -543,22 +547,23 @@ static int balloon_thread(void *unused)
if (credit > 0) {
if (balloon_is_inflated())
- state = increase_reservation(credit);
+ balloon_state = increase_reservation(credit);
else
- state = reserve_additional_memory();
+ balloon_state = reserve_additional_memory();
}
if (credit < 0) {
long n_pages;
n_pages = min(-credit, si_mem_available());
- state = decrease_reservation(n_pages, GFP_BALLOON);
- if (state == BP_DONE && n_pages != -credit &&
+ balloon_state = decrease_reservation(n_pages,
+ GFP_BALLOON);
+ if (balloon_state == BP_DONE && n_pages != -credit &&
n_pages < totalreserve_pages)
- state = BP_EAGAIN;
+ balloon_state = BP_EAGAIN;
}
- state = update_schedule(state);
+ update_schedule();
mutex_unlock(&balloon_mutex);
@@ -765,3 +770,38 @@ static int __init balloon_init(void)
return 0;
}
subsys_initcall(balloon_init);
+
+static int __init balloon_wait_finish(void)
+{
+ long credit, last_credit = 0;
+ unsigned long last_changed = 0;
+
+ if (!xen_domain())
+ return -ENODEV;
+
+ /* PV guests don't need to wait. */
+ if (xen_pv_domain() || !current_credit())
+ return 0;
+
+ pr_notice("Waiting for initial ballooning down having finished.\n");
+
+ while ((credit = current_credit()) < 0) {
+ if (credit != last_credit) {
+ last_changed = jiffies;
+ last_credit = credit;
+ }
+ if (balloon_state == BP_ECANCELED) {
+ pr_warn_once("Initial ballooning failed, %ld pages need to be freed.\n",
+ -credit);
+ if (jiffies - last_changed >= HZ * balloon_boot_timeout)
+ panic("Initial ballooning failed!\n");
+ }
+
+ schedule_timeout_interruptible(HZ / 10);
+ }
+
+ pr_notice("Initial ballooning down finished.\n");
+
+ return 0;
+}
+late_initcall_sync(balloon_wait_finish);
From: Pavel Skripkin <[email protected]>
commit 3ab7992018455ac63c33e9b3eaa7264e293e40f4 upstream.
In commit 411cef6adfb3 ("ALSA: mixer: oss: Fix racy access to slots")
added mutex protection in snd_mixer_oss_set_volume(). Second
mutex_lock() in same function looks like typo, fix it.
Reported-by: [email protected]
Fixes: 411cef6adfb3 ("ALSA: mixer: oss: Fix racy access to slots")
Cc: <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/oss/mixer_oss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -313,7 +313,7 @@ static int snd_mixer_oss_set_volume(stru
pslot->volume[1] = right;
result = (left & 0xff) | ((right & 0xff) << 8);
unlock:
- mutex_lock(&mixer->reg_mutex);
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
From: Marek Behún <[email protected]>
commit e4313be1599d397625c14fb7826996813622decf upstream.
MSI domain callback .alloc() (implemented by advk_msi_irq_domain_alloc()
function) should return zero on success, since non-zero value indicates
failure.
When the driver was converted to generic MSI API in commit f21a8b1b6837
("PCI: aardvark: Move to MSI handling using generic MSI support"), it
was converted so that it returns hwirq number.
Fix this.
Link: https://lore.kernel.org/r/[email protected]
Fixes: f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1180,7 +1180,7 @@ static int advk_msi_irq_domain_alloc(str
domain->host_data, handle_simple_irq,
NULL, NULL);
- return hwirq;
+ return 0;
}
static void advk_msi_irq_domain_free(struct irq_domain *domain,
From: Dmitriy Ulitin <[email protected]>
[ Upstream commit 548fa43a58696450c15b8f5564e99589c5144664 ]
At the moment of enabling irq handling:
1922 ret = devm_request_threaded_irq(&pdev->dev, irq, dcmi_irq_callback,
1923 dcmi_irq_thread, IRQF_ONESHOT,
1924 dev_name(&pdev->dev), dcmi);
there is still uninitialized field sd_format of struct stm32_dcmi *dcmi.
If an interrupt occurs in the interval between the installation of the
interrupt handler and the initialization of this field, NULL pointer
dereference happens.
This field is dereferenced in the handler function without any check:
457 if (dcmi->sd_format->fourcc == V4L2_PIX_FMT_JPEG &&
458 dcmi->misr & IT_FRAME) {
The patch moves interrupt handler installation
after initialization of the sd_format field that happens in
dcmi_graph_notify_complete() via dcmi_set_default_fmt().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Dmitriy Ulitin <[email protected]>
Signed-off-by: Alexey Khoroshilov <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/stm32/stm32-dcmi.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index fd1c41cba52fc..233e4d3feacd9 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -135,6 +135,7 @@ struct stm32_dcmi {
int sequence;
struct list_head buffers;
struct dcmi_buf *active;
+ int irq;
struct v4l2_device v4l2_dev;
struct video_device *vdev;
@@ -1720,6 +1721,14 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
return ret;
}
+ ret = devm_request_threaded_irq(dcmi->dev, dcmi->irq, dcmi_irq_callback,
+ dcmi_irq_thread, IRQF_ONESHOT,
+ dev_name(dcmi->dev), dcmi);
+ if (ret) {
+ dev_err(dcmi->dev, "Unable to request irq %d\n", dcmi->irq);
+ return ret;
+ }
+
return 0;
}
@@ -1881,6 +1890,8 @@ static int dcmi_probe(struct platform_device *pdev)
if (irq <= 0)
return irq ? irq : -ENXIO;
+ dcmi->irq = irq;
+
dcmi->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!dcmi->res) {
dev_err(&pdev->dev, "Could not get resource\n");
@@ -1893,14 +1904,6 @@ static int dcmi_probe(struct platform_device *pdev)
return PTR_ERR(dcmi->regs);
}
- ret = devm_request_threaded_irq(&pdev->dev, irq, dcmi_irq_callback,
- dcmi_irq_thread, IRQF_ONESHOT,
- dev_name(&pdev->dev), dcmi);
- if (ret) {
- dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
- return ret;
- }
-
mclk = devm_clk_get(&pdev->dev, "mclk");
if (IS_ERR(mclk)) {
if (PTR_ERR(mclk) != -EPROBE_DEFER)
--
2.33.0
From: Jonas Dreßler <[email protected]>
[ Upstream commit c606008b70627a2fc485732a53cc22f0f66d0981 ]
When creating a new virtual interface in mwifiex_add_virtual_intf(), we
update our internal driver states like bss_type, bss_priority, bss_role
and bss_mode to reflect the mode the firmware will be set to.
When switching virtual interface mode using
mwifiex_init_new_priv_params() though, we currently only update bss_mode
and bss_role. In order for the interface mode switch to actually work,
we also need to update bss_type to its proper value, so do that.
This fixes a crash of the firmware (because the driver tries to execute
commands that are invalid in AP mode) when switching from station mode
to AP mode.
Signed-off-by: Jonas Dreßler <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 7a4e3c693d38b..3d1b5d3d295ae 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -908,16 +908,20 @@ mwifiex_init_new_priv_params(struct mwifiex_private *priv,
switch (type) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
- priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+ priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+ priv->bss_type = MWIFIEX_BSS_TYPE_STA;
break;
case NL80211_IFTYPE_P2P_CLIENT:
- priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+ priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+ priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
break;
case NL80211_IFTYPE_P2P_GO:
- priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+ priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+ priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
break;
case NL80211_IFTYPE_AP:
priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+ priv->bss_type = MWIFIEX_BSS_TYPE_UAP;
break;
default:
mwifiex_dbg(adapter, ERROR,
--
2.33.0
From: Martin Fuzzey <[email protected]>
commit 99ac6018821253ec67f466086afb63fc18ea48e2 upstream.
My previous patch checked if encryption should be enabled by directly
checking info->control.hw_key (like the downstream driver).
However that missed that the control and driver_info members of
struct ieee80211_tx_info are union fields.
Due to this when rsi_core_xmit() updates fields in "tx_params"
(driver_info) it can overwrite the control.hw_key, causing the result
of the later test to be incorrect.
With the current structure layout the first byte of control.hw_key is
overlayed with the vap_id so, since we only test if control.hw_key is
NULL / non NULL, a non zero vap_id will incorrectly enable encryption.
In basic STA and AP modes the vap_id is always zero so it works but in
P2P client mode a second VIF is created causing vap_id to be non zero
and hence encryption to be enabled before keys have been set.
Fix this by extracting the key presence flag to a new field in the driver
private tx_params structure and populating it first.
Fixes: 314538041b56 ("rsi: fix AP mode with WPA failure due to encrypted EAPOL")
Signed-off-by: Martin Fuzzey <[email protected]>
CC: [email protected]
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_core.c | 2 ++
drivers/net/wireless/rsi/rsi_91x_hal.c | 2 +-
drivers/net/wireless/rsi/rsi_main.h | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/rsi/rsi_91x_core.c
+++ b/drivers/net/wireless/rsi/rsi_91x_core.c
@@ -400,6 +400,8 @@ void rsi_core_xmit(struct rsi_common *co
info = IEEE80211_SKB_CB(skb);
tx_params = (struct skb_info *)info->driver_data;
+ /* info->driver_data and info->control part of union so make copy */
+ tx_params->have_key = !!info->control.hw_key;
wh = (struct ieee80211_hdr *)&skb->data[0];
tx_params->sta_id = 0;
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -203,7 +203,7 @@ int rsi_prepare_data_desc(struct rsi_com
wh->frame_control |= cpu_to_le16(RSI_SET_PS_ENABLE);
if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
- info->control.hw_key) {
+ tx_params->have_key) {
if (rsi_is_cipher_wep(common))
ieee80211_size += 4;
else
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -139,6 +139,7 @@ struct skb_info {
u8 internal_hdr_size;
struct ieee80211_vif *vif;
u8 vap_id;
+ bool have_key;
};
enum edca_queue {
From: Takashi Iwai <[email protected]>
commit 411cef6adfb38a5bb6bd9af3941b28198e7fb680 upstream.
The OSS mixer can reassign the mapping slots dynamically via proc
file. Although the addition and deletion of those slots are protected
by mixer->reg_mutex, the access to slots aren't, hence this may cause
UAF when the slots in use are deleted concurrently.
This patch applies the mixer->reg_mutex in all appropriate code paths
(i.e. the ioctl functions) that may access slots.
Reported-by: [email protected]
Reviewed-by: Jaroslav Kysela <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/oss/mixer_oss.c | 43 +++++++++++++++++++++++++++++++++----------
1 file changed, 33 insertions(+), 10 deletions(-)
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -130,11 +130,13 @@ static int snd_mixer_oss_devmask(struct
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
for (chn = 0; chn < 31; chn++) {
pslot = &mixer->slots[chn];
if (pslot->put_volume || pslot->put_recsrc)
result |= 1 << chn;
}
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -146,11 +148,13 @@ static int snd_mixer_oss_stereodevs(stru
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
for (chn = 0; chn < 31; chn++) {
pslot = &mixer->slots[chn];
if (pslot->put_volume && pslot->stereo)
result |= 1 << chn;
}
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -161,6 +165,7 @@ static int snd_mixer_oss_recmask(struct
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
if (mixer->put_recsrc && mixer->get_recsrc) { /* exclusive */
result = mixer->mask_recsrc;
} else {
@@ -172,6 +177,7 @@ static int snd_mixer_oss_recmask(struct
result |= 1 << chn;
}
}
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -182,11 +188,12 @@ static int snd_mixer_oss_get_recsrc(stru
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
if (mixer->put_recsrc && mixer->get_recsrc) { /* exclusive */
- int err;
unsigned int index;
- if ((err = mixer->get_recsrc(fmixer, &index)) < 0)
- return err;
+ result = mixer->get_recsrc(fmixer, &index);
+ if (result < 0)
+ goto unlock;
result = 1 << index;
} else {
struct snd_mixer_oss_slot *pslot;
@@ -201,7 +208,10 @@ static int snd_mixer_oss_get_recsrc(stru
}
}
}
- return mixer->oss_recsrc = result;
+ mixer->oss_recsrc = result;
+ unlock:
+ mutex_unlock(&mixer->reg_mutex);
+ return result;
}
static int snd_mixer_oss_set_recsrc(struct snd_mixer_oss_file *fmixer, int recsrc)
@@ -214,6 +224,7 @@ static int snd_mixer_oss_set_recsrc(stru
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
if (mixer->get_recsrc && mixer->put_recsrc) { /* exclusive input */
if (recsrc & ~mixer->oss_recsrc)
recsrc &= ~mixer->oss_recsrc;
@@ -239,6 +250,7 @@ static int snd_mixer_oss_set_recsrc(stru
}
}
}
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -250,6 +262,7 @@ static int snd_mixer_oss_get_volume(stru
if (mixer == NULL || slot > 30)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
pslot = &mixer->slots[slot];
left = pslot->volume[0];
right = pslot->volume[1];
@@ -257,15 +270,21 @@ static int snd_mixer_oss_get_volume(stru
result = pslot->get_volume(fmixer, pslot, &left, &right);
if (!pslot->stereo)
right = left;
- if (snd_BUG_ON(left < 0 || left > 100))
- return -EIO;
- if (snd_BUG_ON(right < 0 || right > 100))
- return -EIO;
+ if (snd_BUG_ON(left < 0 || left > 100)) {
+ result = -EIO;
+ goto unlock;
+ }
+ if (snd_BUG_ON(right < 0 || right > 100)) {
+ result = -EIO;
+ goto unlock;
+ }
if (result >= 0) {
pslot->volume[0] = left;
pslot->volume[1] = right;
result = (left & 0xff) | ((right & 0xff) << 8);
}
+ unlock:
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -278,6 +297,7 @@ static int snd_mixer_oss_set_volume(stru
if (mixer == NULL || slot > 30)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
pslot = &mixer->slots[slot];
if (left > 100)
left = 100;
@@ -288,10 +308,13 @@ static int snd_mixer_oss_set_volume(stru
if (pslot->put_volume)
result = pslot->put_volume(fmixer, pslot, left, right);
if (result < 0)
- return result;
+ goto unlock;
pslot->volume[0] = left;
pslot->volume[1] = right;
- return (left & 0xff) | ((right & 0xff) << 8);
+ result = (left & 0xff) | ((right & 0xff) << 8);
+ unlock:
+ mutex_lock(&mixer->reg_mutex);
+ return result;
}
static int snd_mixer_oss_ioctl1(struct snd_mixer_oss_file *fmixer, unsigned int cmd, unsigned long arg)
From: Arnd Bergmann <[email protected]>
commit 7444d706be31753f65052c7f6325fc8470cc1789 upstream.
The driver no longer depends on this option, but it fails to
build if it's disabled because the skb->tc_skip_classify is
hidden behind an #ifdef:
drivers/net/ifb.c:81:8: error: no member named 'tc_skip_classify' in 'struct sk_buff'
skb->tc_skip_classify = 1;
Use the same #ifdef around the assignment.
Fixes: 046178e726c2 ("ifb: Depend on netfilter alternatively to tc")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ifb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -76,7 +76,9 @@ static void ifb_ri_tasklet(unsigned long
while ((skb = __skb_dequeue(&txp->tq)) != NULL) {
skb->redirected = 0;
+#ifdef CONFIG_NET_CLS_ACT
skb->tc_skip_classify = 1;
+#endif
u64_stats_update_begin(&txp->tsync);
txp->tx_packets++;
From: Miquel Raynal <[email protected]>
commit b4ebddd6540d78a7f977b3fea0261bd575c6ffe2 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: b36bf0a0fe5d ("mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/socrates_nand.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -119,9 +119,8 @@ static int socrates_nand_device_ready(st
static int socrates_attach_chip(struct nand_chip *chip)
{
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
@@ -175,6 +174,13 @@ static int socrates_nand_probe(struct pl
/* TODO: I have no idea what real delay is. */
nand_chip->legacy.chip_delay = 20; /* 20us command delay time */
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
dev_set_drvdata(&ofdev->dev, host);
res = nand_scan(nand_chip, 1);
From: Amit Engel <[email protected]>
[ Upstream commit 86aeda32b887cdaeb0f4b7bfc9971e36377181c7 ]
Pass the correct length to nvmet_tcp_verify_hdgst, which is the pdu
header length. This fixes a wrong behaviour where header digest
verification passes although the digest is wrong.
Signed-off-by: Amit Engel <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/tcp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index b4ef7e9e8461f..58dc517fe8678 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1084,7 +1084,7 @@ recv:
}
if (queue->hdr_digest &&
- nvmet_tcp_verify_hdgst(queue, &queue->pdu, queue->offset)) {
+ nvmet_tcp_verify_hdgst(queue, &queue->pdu, hdr->hlen)) {
nvmet_tcp_fatal_error(queue); /* fatal */
return -EPROTO;
}
--
2.33.0
From: Johan Hovold <[email protected]>
commit c1b9ca365deae667192be9fe24db244919971234 upstream.
Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 9cbee358687e ("ath6kl: add full USB support")
Cc: [email protected] # 3.5
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath6kl/usb.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -340,6 +340,11 @@ static int ath6kl_usb_setup_pipe_resourc
le16_to_cpu(endpoint->wMaxPacketSize),
endpoint->bInterval);
}
+
+ /* Ignore broken descriptors. */
+ if (usb_endpoint_maxp(endpoint) == 0)
+ continue;
+
urbcount = 0;
pipe_num =
From: Ondrej Mosnacek <[email protected]>
commit cbfcd13be5cb2a07868afe67520ed181956579a7 upstream.
Current code contains a lot of racy patterns when converting an
ocontext's context structure to an SID. This is being done in a "lazy"
fashion, such that the SID is looked up in the SID table only when it's
first needed and then cached in the "sid" field of the ocontext
structure. However, this is done without any locking or memory barriers
and is thus unsafe.
Between commits 24ed7fdae669 ("selinux: use separate table for initial
SID lookup") and 66f8e2f03c02 ("selinux: sidtab reverse lookup hash
table"), this race condition lead to an actual observable bug, because a
pointer to the shared sid field was passed directly to
sidtab_context_to_sid(), which was using this location to also store an
intermediate value, which could have been read by other threads and
interpreted as an SID. In practice this caused e.g. new mounts to get a
wrong (seemingly random) filesystem context, leading to strange denials.
This bug has been spotted in the wild at least twice, see [1] and [2].
Fix the race condition by making all the racy functions use a common
helper that ensures the ocontext::sid accesses are made safely using the
appropriate SMP constructs.
Note that security_netif_sid() was populating the sid field of both
contexts stored in the ocontext, but only the first one was actually
used. The SELinux wiki's documentation on the "netifcon" policy
statement [3] suggests that using only the first context is intentional.
I kept only the handling of the first context here, as there is really
no point in doing the SID lookup for the unused one.
I wasn't able to reproduce the bug mentioned above on any kernel that
includes commit 66f8e2f03c02, even though it has been reported that the
issue occurs with that commit, too, just less frequently. Thus, I wasn't
able to verify that this patch fixes the issue, but it makes sense to
avoid the race condition regardless.
[1] https://github.com/containers/container-selinux/issues/89
[2] https://lists.fedoraproject.org/archives/list/[email protected]/thread/6DMTAMHIOAOEMUAVTULJD45JZU7IBAFM/
[3] https://selinuxproject.org/page/NetworkStatements#netifcon
Cc: [email protected]
Cc: Xinjie Zheng <[email protected]>
Reported-by: Sujithra Periasamy <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/ss/services.c | 162 +++++++++++++++++++----------------------
1 file changed, 77 insertions(+), 85 deletions(-)
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -2369,6 +2369,43 @@ err_policy:
}
/**
+ * ocontext_to_sid - Helper to safely get sid for an ocontext
+ * @sidtab: SID table
+ * @c: ocontext structure
+ * @index: index of the context entry (0 or 1)
+ * @out_sid: pointer to the resulting SID value
+ *
+ * For all ocontexts except OCON_ISID the SID fields are populated
+ * on-demand when needed. Since updating the SID value is an SMP-sensitive
+ * operation, this helper must be used to do that safely.
+ *
+ * WARNING: This function may return -ESTALE, indicating that the caller
+ * must retry the operation after re-acquiring the policy pointer!
+ */
+static int ocontext_to_sid(struct sidtab *sidtab, struct ocontext *c,
+ size_t index, u32 *out_sid)
+{
+ int rc;
+ u32 sid;
+
+ /* Ensure the associated sidtab entry is visible to this thread. */
+ sid = smp_load_acquire(&c->sid[index]);
+ if (!sid) {
+ rc = sidtab_context_to_sid(sidtab, &c->context[index], &sid);
+ if (rc)
+ return rc;
+
+ /*
+ * Ensure the new sidtab entry is visible to other threads
+ * when they see the SID.
+ */
+ smp_store_release(&c->sid[index], sid);
+ }
+ *out_sid = sid;
+ return 0;
+}
+
+/**
* security_port_sid - Obtain the SID for a port.
* @protocol: protocol number
* @port: port number
@@ -2405,17 +2442,13 @@ retry:
}
if (c) {
- if (!c->sid[0]) {
- rc = sidtab_context_to_sid(sidtab, &c->context[0],
- &c->sid[0]);
- if (rc == -ESTALE) {
- rcu_read_unlock();
- goto retry;
- }
- if (rc)
- goto out;
+ rc = ocontext_to_sid(sidtab, c, 0, out_sid);
+ if (rc == -ESTALE) {
+ rcu_read_unlock();
+ goto retry;
}
- *out_sid = c->sid[0];
+ if (rc)
+ goto out;
} else {
*out_sid = SECINITSID_PORT;
}
@@ -2463,18 +2496,13 @@ retry:
}
if (c) {
- if (!c->sid[0]) {
- rc = sidtab_context_to_sid(sidtab,
- &c->context[0],
- &c->sid[0]);
- if (rc == -ESTALE) {
- rcu_read_unlock();
- goto retry;
- }
- if (rc)
- goto out;
+ rc = ocontext_to_sid(sidtab, c, 0, out_sid);
+ if (rc == -ESTALE) {
+ rcu_read_unlock();
+ goto retry;
}
- *out_sid = c->sid[0];
+ if (rc)
+ goto out;
} else
*out_sid = SECINITSID_UNLABELED;
@@ -2522,17 +2550,13 @@ retry:
}
if (c) {
- if (!c->sid[0]) {
- rc = sidtab_context_to_sid(sidtab, &c->context[0],
- &c->sid[0]);
- if (rc == -ESTALE) {
- rcu_read_unlock();
- goto retry;
- }
- if (rc)
- goto out;
+ rc = ocontext_to_sid(sidtab, c, 0, out_sid);
+ if (rc == -ESTALE) {
+ rcu_read_unlock();
+ goto retry;
}
- *out_sid = c->sid[0];
+ if (rc)
+ goto out;
} else
*out_sid = SECINITSID_UNLABELED;
@@ -2575,25 +2599,13 @@ retry:
}
if (c) {
- if (!c->sid[0] || !c->sid[1]) {
- rc = sidtab_context_to_sid(sidtab, &c->context[0],
- &c->sid[0]);
- if (rc == -ESTALE) {
- rcu_read_unlock();
- goto retry;
- }
- if (rc)
- goto out;
- rc = sidtab_context_to_sid(sidtab, &c->context[1],
- &c->sid[1]);
- if (rc == -ESTALE) {
- rcu_read_unlock();
- goto retry;
- }
- if (rc)
- goto out;
+ rc = ocontext_to_sid(sidtab, c, 0, if_sid);
+ if (rc == -ESTALE) {
+ rcu_read_unlock();
+ goto retry;
}
- *if_sid = c->sid[0];
+ if (rc)
+ goto out;
} else
*if_sid = SECINITSID_NETIF;
@@ -2684,18 +2696,13 @@ retry:
}
if (c) {
- if (!c->sid[0]) {
- rc = sidtab_context_to_sid(sidtab,
- &c->context[0],
- &c->sid[0]);
- if (rc == -ESTALE) {
- rcu_read_unlock();
- goto retry;
- }
- if (rc)
- goto out;
+ rc = ocontext_to_sid(sidtab, c, 0, out_sid);
+ if (rc == -ESTALE) {
+ rcu_read_unlock();
+ goto retry;
}
- *out_sid = c->sid[0];
+ if (rc)
+ goto out;
} else {
*out_sid = SECINITSID_NODE;
}
@@ -2859,7 +2866,7 @@ static inline int __security_genfs_sid(s
u16 sclass;
struct genfs *genfs;
struct ocontext *c;
- int rc, cmp = 0;
+ int cmp = 0;
while (path[0] == '/' && path[1] == '/')
path++;
@@ -2873,9 +2880,8 @@ static inline int __security_genfs_sid(s
break;
}
- rc = -ENOENT;
if (!genfs || cmp)
- goto out;
+ return -ENOENT;
for (c = genfs->head; c; c = c->next) {
len = strlen(c->u.name);
@@ -2884,20 +2890,10 @@ static inline int __security_genfs_sid(s
break;
}
- rc = -ENOENT;
if (!c)
- goto out;
+ return -ENOENT;
- if (!c->sid[0]) {
- rc = sidtab_context_to_sid(sidtab, &c->context[0], &c->sid[0]);
- if (rc)
- goto out;
- }
-
- *sid = c->sid[0];
- rc = 0;
-out:
- return rc;
+ return ocontext_to_sid(sidtab, c, 0, sid);
}
/**
@@ -2980,17 +2976,13 @@ retry:
if (c) {
sbsec->behavior = c->v.behavior;
- if (!c->sid[0]) {
- rc = sidtab_context_to_sid(sidtab, &c->context[0],
- &c->sid[0]);
- if (rc == -ESTALE) {
- rcu_read_unlock();
- goto retry;
- }
- if (rc)
- goto out;
+ rc = ocontext_to_sid(sidtab, c, 0, &sbsec->sid);
+ if (rc == -ESTALE) {
+ rcu_read_unlock();
+ goto retry;
}
- sbsec->sid = c->sid[0];
+ if (rc)
+ goto out;
} else {
rc = __security_genfs_sid(policy, fstype, "/",
SECCLASS_DIR, &sbsec->sid);
From: Anand Jain <[email protected]>
commit 5c78a5e7aa835c4f08a7c90fe02d19f95a776f29 upstream.
In open_ctree() in btrfs_check_rw_degradable() [1], we check each block
group individually if at least the minimum number of devices is available
for that profile. If all the devices are available, then we don't have to
check degradable.
[1]
open_ctree()
::
3559 if (!sb_rdonly(sb) && !btrfs_check_rw_degradable(fs_info, NULL)) {
Also before calling btrfs_check_rw_degradable() in open_ctee() at the
line number shown below [2] we call btrfs_read_chunk_tree() and down to
add_missing_dev() to record number of missing devices.
[2]
open_ctree()
::
3454 ret = btrfs_read_chunk_tree(fs_info);
btrfs_read_chunk_tree()
read_one_chunk() / read_one_dev()
add_missing_dev()
So, check if there is any missing device before btrfs_check_rw_degradable()
in open_ctree().
Also, with this the mount command could save ~16ms.[3] in the most
common case, that is no device is missing.
[3]
1) * 16934.96 us | btrfs_check_rw_degradable [btrfs]();
CC: [email protected] # 4.19+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Anand Jain <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/disk-io.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -3223,7 +3223,8 @@ int __cold open_ctree(struct super_block
goto fail_sysfs;
}
- if (!sb_rdonly(sb) && !btrfs_check_rw_degradable(fs_info, NULL)) {
+ if (!sb_rdonly(sb) && fs_info->fs_devices->missing_devices &&
+ !btrfs_check_rw_degradable(fs_info, NULL)) {
btrfs_warn(fs_info,
"writable mount is not allowed due to too many missing devices");
goto fail_sysfs;
From: Sean Christopherson <[email protected]>
commit ec5a4919fa7b7d8c7a2af1c7e799b1fe4be84343 upstream.
Unregister KVM's posted interrupt wakeup handler during unsetup so that a
spurious interrupt that arrives after kvm_intel.ko is unloaded doesn't
call into freed memory.
Fixes: bf9f6ac8d749 ("KVM: Update Posted-Interrupts Descriptor when vCPU is blocked")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/vmx.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7586,6 +7586,8 @@ static void vmx_migrate_timers(struct kv
static void hardware_unsetup(void)
{
+ kvm_set_posted_intr_wakeup_handler(NULL);
+
if (nested)
nested_vmx_hardware_unsetup();
@@ -7877,8 +7879,6 @@ static __init int hardware_setup(void)
vmx_x86_ops.request_immediate_exit = __kvm_request_immediate_exit;
}
- kvm_set_posted_intr_wakeup_handler(pi_wakeup_handler);
-
kvm_mce_cap_supported |= MCG_LMCE_P;
if (pt_mode != PT_MODE_SYSTEM && pt_mode != PT_MODE_HOST_GUEST)
@@ -7900,6 +7900,9 @@ static __init int hardware_setup(void)
r = alloc_kvm_area();
if (r)
nested_vmx_hardware_unsetup();
+
+ kvm_set_posted_intr_wakeup_handler(pi_wakeup_handler);
+
return r;
}
From: Arnd Bergmann <[email protected]>
[ Upstream commit 8017c99680fa65e1e8d999df1583de476a187830 ]
On arm64 randconfig builds, hyperv sometimes fails with this
error:
In file included from drivers/hv/hv_trace.c:3:
In file included from drivers/hv/hyperv_vmbus.h:16:
In file included from arch/arm64/include/asm/sync_bitops.h:5:
arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly
In file included from include/asm-generic/bitops/hweight.h:5:
include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration]
include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration]
Include the correct header first.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hv/hyperv_vmbus.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 40e2b9f91163c..7845fa5de79e9 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -13,6 +13,7 @@
#define _HYPERV_VMBUS_H
#include <linux/list.h>
+#include <linux/bitops.h>
#include <asm/sync_bitops.h>
#include <asm/hyperv-tlfs.h>
#include <linux/atomic.h>
--
2.33.0
From: Sean Christopherson <[email protected]>
commit 6ff53f6a438f72998f56e82e76694a1df9d1ea2c upstream.
Add a synchronize_rcu() after clearing the posted interrupt wakeup handler
to ensure all readers, i.e. in-flight IRQ handlers, see the new handler
before returning to the caller. If the caller is an exiting module and
is unregistering its handler, failure to wait could result in the IRQ
handler jumping into an unloaded module.
The registration path doesn't require synchronization, as it's the
caller's responsibility to not generate interrupts it cares about until
after its handler is registered.
Fixes: f6b3c72c2366 ("x86/irq: Define a global vector for VT-d Posted-Interrupts")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/irq.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -290,8 +290,10 @@ void kvm_set_posted_intr_wakeup_handler(
{
if (handler)
kvm_posted_intr_wakeup_handler = handler;
- else
+ else {
kvm_posted_intr_wakeup_handler = dummy_handler;
+ synchronize_rcu();
+ }
}
EXPORT_SYMBOL_GPL(kvm_set_posted_intr_wakeup_handler);
From: Zev Weiss <[email protected]>
commit ae59dc455a78fb73034dd1fbb337d7e59c27cbd8 upstream.
With the exception of the lm5066i, all the devices handled by this
driver had been missing their offset ('b') coefficients for direct
format readings.
Cc: [email protected]
Fixes: 58615a94f6a1 ("hwmon: (pmbus/lm25066) Add support for LM25056")
Fixes: e53e6497fc9f ("hwmon: (pmbus/lm25066) Refactor device specific coefficients")
Signed-off-by: Zev Weiss <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/pmbus/lm25066.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/drivers/hwmon/pmbus/lm25066.c
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -55,22 +55,27 @@ static struct __coeff lm25066_coeff[6][P
[lm25056] = {
[PSC_VOLTAGE_IN] = {
.m = 16296,
+ .b = 1343,
.R = -2,
},
[PSC_CURRENT_IN] = {
.m = 13797,
+ .b = -1833,
.R = -2,
},
[PSC_CURRENT_IN_L] = {
.m = 6726,
+ .b = -537,
.R = -2,
},
[PSC_POWER] = {
.m = 5501,
+ .b = -2908,
.R = -3,
},
[PSC_POWER_L] = {
.m = 26882,
+ .b = -5646,
.R = -4,
},
[PSC_TEMPERATURE] = {
@@ -82,26 +87,32 @@ static struct __coeff lm25066_coeff[6][P
[lm25066] = {
[PSC_VOLTAGE_IN] = {
.m = 22070,
+ .b = -1800,
.R = -2,
},
[PSC_VOLTAGE_OUT] = {
.m = 22070,
+ .b = -1800,
.R = -2,
},
[PSC_CURRENT_IN] = {
.m = 13661,
+ .b = -5200,
.R = -2,
},
[PSC_CURRENT_IN_L] = {
.m = 6852,
+ .b = -3100,
.R = -2,
},
[PSC_POWER] = {
.m = 736,
+ .b = -3300,
.R = -2,
},
[PSC_POWER_L] = {
.m = 369,
+ .b = -1900,
.R = -2,
},
[PSC_TEMPERATURE] = {
@@ -111,26 +122,32 @@ static struct __coeff lm25066_coeff[6][P
[lm5064] = {
[PSC_VOLTAGE_IN] = {
.m = 4611,
+ .b = -642,
.R = -2,
},
[PSC_VOLTAGE_OUT] = {
.m = 4621,
+ .b = 423,
.R = -2,
},
[PSC_CURRENT_IN] = {
.m = 10742,
+ .b = 1552,
.R = -2,
},
[PSC_CURRENT_IN_L] = {
.m = 5456,
+ .b = 2118,
.R = -2,
},
[PSC_POWER] = {
.m = 1204,
+ .b = 8524,
.R = -3,
},
[PSC_POWER_L] = {
.m = 612,
+ .b = 11202,
.R = -3,
},
[PSC_TEMPERATURE] = {
@@ -140,26 +157,32 @@ static struct __coeff lm25066_coeff[6][P
[lm5066] = {
[PSC_VOLTAGE_IN] = {
.m = 4587,
+ .b = -1200,
.R = -2,
},
[PSC_VOLTAGE_OUT] = {
.m = 4587,
+ .b = -2400,
.R = -2,
},
[PSC_CURRENT_IN] = {
.m = 10753,
+ .b = -1200,
.R = -2,
},
[PSC_CURRENT_IN_L] = {
.m = 5405,
+ .b = -600,
.R = -2,
},
[PSC_POWER] = {
.m = 1204,
+ .b = -6000,
.R = -3,
},
[PSC_POWER_L] = {
.m = 605,
+ .b = -8000,
.R = -3,
},
[PSC_TEMPERATURE] = {
From: Eric Badger <[email protected]>
commit 537bddd069c743759addf422d0b8f028ff0f8dbc upstream.
The computation of TOHM is off by one bit. This missed bit results in
too low a value for TOHM, which can cause errors in regular memory to
incorrectly report:
EDAC MC0: 1 CE Error at MMIOH area, on addr 0x000000207fffa680 on any memory
Fixes: 50d1bb93672f ("sb_edac: add support for Haswell based systems")
Cc: [email protected]
Reported-by: Meeta Saggi <[email protected]>
Signed-off-by: Eric Badger <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/edac/sb_edac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -1052,7 +1052,7 @@ static u64 haswell_get_tohm(struct sbrid
pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOHM_1, ®);
rc = ((reg << 6) | rc) << 26;
- return rc | 0x1ffffff;
+ return rc | 0x3ffffff;
}
static u64 knl_get_tolm(struct sbridge_pvt *pvt)
From: Krzysztof Kozlowski <[email protected]>
commit a7fda04bc9b6ad9da8e19c9e6e3b1dab773d068a upstream.
The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".
Cc: <[email protected]>
Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -39,7 +39,7 @@ Optional properties of the main device n
Additional properties required if either of the optional properties are used:
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
the possible 8 options selectable by the dvs gpios. The value of this
property should be between 0 and 7. If not specified or if out of range, the
default value of this property is set to 0.
From: Krzysztof Kozlowski <[email protected]>
commit b16bef60a9112b1e6daf3afd16484eb06e7ce792 upstream.
The driver and its bindings, before commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <[email protected]>
Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt | 21 +++-------
drivers/regulator/s5m8767.c | 21 ++++------
2 files changed, 17 insertions(+), 25 deletions(-)
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+ for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, then all the eight voltage values for the
+ 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
for additional information.
@@ -25,19 +33,6 @@ Required properties of the main device n
units for buck4 when changing voltage using gpio dvs. Refer to [1] below
for additional information.
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
- for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
- property should specify atleast one voltage level (which would be a
- safe operating voltage).
-
- If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, then all the eight voltage values for the
- 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -850,18 +850,15 @@ static int s5m8767_pmic_probe(struct pla
/* DS4 GPIO */
gpio_direction_output(pdata->buck_ds[2], 0x0);
- if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
- pdata->buck4_gpiodvs) {
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK2CTRL, 1 << 1,
- (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK3CTRL, 1 << 1,
- (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK4CTRL, 1 << 1,
- (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
- }
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK2CTRL, 1 << 1,
+ (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK3CTRL, 1 << 1,
+ (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK4CTRL, 1 << 1,
+ (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
/* Initialize GPIO DVS registers */
for (i = 0; i < 8; i++) {
From: Johan Hovold <[email protected]>
commit 89f8765a11d8df49296d92c404067f9b5c58ee26 upstream.
Add the missing endpoint sanity checks to probe() to avoid division by
zero in mwifiex_write_data_sync() in case a malicious device has broken
descriptors (or when doing descriptor fuzz testing).
Only add checks for the firmware-download boot stage, which require both
command endpoints, for now. The driver looks like it will handle a
missing endpoint during normal operation without oopsing, albeit not
very gracefully as it will try to submit URBs to the default pipe and
fail.
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset")
Cc: [email protected] # 3.5
Cc: Amitkumar Karwar <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/usb.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -505,6 +505,22 @@ static int mwifiex_usb_probe(struct usb_
}
}
+ switch (card->usb_boot_state) {
+ case USB8XXX_FW_DNLD:
+ /* Reject broken descriptors. */
+ if (!card->rx_cmd_ep || !card->tx_cmd_ep)
+ return -ENODEV;
+ if (card->bulk_out_maxpktsize == 0)
+ return -ENODEV;
+ break;
+ case USB8XXX_FW_READY:
+ /* Assume the driver can handle missing endpoints for now. */
+ break;
+ default:
+ WARN_ON(1);
+ return -ENODEV;
+ }
+
usb_set_intfdata(intf, card);
ret = mwifiex_add_card(card, &card->fw_done, &usb_ops,
From: Masami Hiramatsu <[email protected]>
commit a7fe2378454cf46cd5e2776d05e72bbe8f0a468c upstream.
The following commit:
Commit e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")
Passed the wrong trampoline address to __kretprobe_trampoline_handler(): it
passes the descriptor address instead of function entry address.
Pass the right parameter.
Also use correct symbol dereference function to get the function address
from 'kretprobe_trampoline' - an IA64 special.
Link: https://lkml.kernel.org/r/163163042696.489837.12551102356265354730.stgit@devnote2
Fixes: e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")
Cc: Josh Poimboeuf <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: X86 ML <[email protected]>
Cc: Daniel Xu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Abhishek Sagar <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: [email protected]
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/ia64/kernel/kprobes.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -398,7 +398,8 @@ static void kretprobe_trampoline(void)
int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
{
- regs->cr_iip = __kretprobe_trampoline_handler(regs, kretprobe_trampoline, NULL);
+ regs->cr_iip = __kretprobe_trampoline_handler(regs,
+ dereference_function_descriptor(kretprobe_trampoline), NULL);
/*
* By returning a non-zero value, we are telling
* kprobe_handler() that we don't want the post_handler
@@ -414,7 +415,7 @@ void __kprobes arch_prepare_kretprobe(st
ri->fp = NULL;
/* Replace the return addr with trampoline addr */
- regs->b0 = ((struct fnptr *)kretprobe_trampoline)->ip;
+ regs->b0 = (unsigned long)dereference_function_descriptor(kretprobe_trampoline);
}
/* Check the instruction in the slot is break */
@@ -918,14 +919,14 @@ static struct kprobe trampoline_p = {
int __init arch_init_kprobes(void)
{
trampoline_p.addr =
- (kprobe_opcode_t *)((struct fnptr *)kretprobe_trampoline)->ip;
+ dereference_function_descriptor(kretprobe_trampoline);
return register_kprobe(&trampoline_p);
}
int __kprobes arch_trampoline_kprobe(struct kprobe *p)
{
if (p->addr ==
- (kprobe_opcode_t *)((struct fnptr *)kretprobe_trampoline)->ip)
+ dereference_function_descriptor(kretprobe_trampoline))
return 1;
return 0;
From: Andreas Gruenbacher <[email protected]>
commit 0c8eb2884a42d992c7726539328b7d3568f22143 upstream.
When switching from __get_user to fault_in_pages_readable, commit
9f9eae5ce717 broke kvm_use_magic_page: like __get_user,
fault_in_pages_readable returns 0 on success.
Fixes: 9f9eae5ce717 ("powerpc/kvm: Prefer fault_in_pages_readable function")
Cc: [email protected] # v4.18+
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/kvm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -669,7 +669,7 @@ static void __init kvm_use_magic_page(vo
on_each_cpu(kvm_map_magic_page, &features, 1);
/* Quick self-test to see if the mapping works */
- if (!fault_in_pages_readable((const char *)KVM_MAGIC_PAGE, sizeof(u32))) {
+ if (fault_in_pages_readable((const char *)KVM_MAGIC_PAGE, sizeof(u32))) {
kvm_patching_worked = false;
return;
}
From: Filipe Manana <[email protected]>
commit 10adb1152d957a4d570ad630f93a88bb961616c1 upstream.
At replay_dir_deletes(), if find_dir_range() returns an error we break out
of the main while loop and then assign a value of 0 (success) to the 'ret'
variable, resulting in completely ignoring that an error happened. Fix
that by jumping to the 'out' label when find_dir_range() returns an error
(negative value).
CC: [email protected] # 4.4+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2466,7 +2466,9 @@ again:
else {
ret = find_dir_range(log, path, dirid, key_type,
&range_start, &range_end);
- if (ret != 0)
+ if (ret < 0)
+ goto out;
+ else if (ret > 0)
break;
}
From: Lorenz Bauer <[email protected]>
[ Upstream commit fadb7ff1a6c2c565af56b4aacdd086b067eed440 ]
Restrict bpf_jit_limit to the maximum supported by the arch's JIT.
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/filter.h | 1 +
kernel/bpf/core.c | 4 +++-
net/core/sysctl_net_core.c | 2 +-
3 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 822b701c803d1..bc6ce4b202a80 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -998,6 +998,7 @@ extern int bpf_jit_enable;
extern int bpf_jit_harden;
extern int bpf_jit_kallsyms;
extern long bpf_jit_limit;
+extern long bpf_jit_limit_max;
typedef void (*bpf_jit_fill_hole_t)(void *area, unsigned int size);
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 72e4bf0ee5460..d3a1f25f8ec2e 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -528,6 +528,7 @@ int bpf_jit_enable __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_DEFAULT_ON);
int bpf_jit_kallsyms __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_DEFAULT_ON);
int bpf_jit_harden __read_mostly;
long bpf_jit_limit __read_mostly;
+long bpf_jit_limit_max __read_mostly;
static void
bpf_prog_ksym_set_addr(struct bpf_prog *prog)
@@ -821,7 +822,8 @@ u64 __weak bpf_jit_alloc_exec_limit(void)
static int __init bpf_jit_charge_init(void)
{
/* Only used as heuristic here to derive limit. */
- bpf_jit_limit = min_t(u64, round_up(bpf_jit_alloc_exec_limit() >> 2,
+ bpf_jit_limit_max = bpf_jit_alloc_exec_limit();
+ bpf_jit_limit = min_t(u64, round_up(bpf_jit_limit_max >> 2,
PAGE_SIZE), LONG_MAX);
return 0;
}
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index d86d8d11cfe4a..2e0a4378e778a 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -419,7 +419,7 @@ static struct ctl_table net_core_table[] = {
.mode = 0600,
.proc_handler = proc_dolongvec_minmax_bpf_restricted,
.extra1 = &long_one,
- .extra2 = &long_max,
+ .extra2 = &bpf_jit_limit_max,
},
#endif
{
--
2.33.0
From: Jane Malalane <[email protected]>
commit 415de44076640483648d6c0f6d645a9ee61328ad upstream.
Currently, Linux probes for X86_BUG_NULL_SEL unconditionally which
makes it unsafe to migrate in a virtualised environment as the
properties across the migration pool might differ.
To be specific, the case which goes wrong is:
1. Zen1 (or earlier) and Zen2 (or later) in a migration pool
2. Linux boots on Zen2, probes and finds the absence of X86_BUG_NULL_SEL
3. Linux is then migrated to Zen1
Linux is now running on a X86_BUG_NULL_SEL-impacted CPU while believing
that the bug is fixed.
The only way to address the problem is to fully trust the "no longer
affected" CPUID bit when virtualised, because in the above case it would
be clear deliberately to indicate the fact "you might migrate to
somewhere which has this behaviour".
Zen3 adds the NullSelectorClearsBase CPUID bit to indicate that loading
a NULL segment selector zeroes the base and limit fields, as well as
just attributes. Zen2 also has this behaviour but doesn't have the NSCB
bit.
[ bp: Minor touchups. ]
Signed-off-by: Jane Malalane <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
CC: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/amd.c | 2 +
arch/x86/kernel/cpu/common.c | 44 ++++++++++++++++++++++++++++++++++++-------
arch/x86/kernel/cpu/cpu.h | 1
arch/x86/kernel/cpu/hygon.c | 2 +
4 files changed, 42 insertions(+), 7 deletions(-)
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1017,6 +1017,8 @@ static void init_amd(struct cpuinfo_x86
if (cpu_has(c, X86_FEATURE_IRPERF) &&
!cpu_has_amd_erratum(c, amd_erratum_1054))
msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
+
+ check_null_seg_clears_base(c);
}
#ifdef CONFIG_X86_32
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1391,9 +1391,8 @@ void __init early_cpu_init(void)
early_identify_cpu(&boot_cpu_data);
}
-static void detect_null_seg_behavior(struct cpuinfo_x86 *c)
+static bool detect_null_seg_behavior(void)
{
-#ifdef CONFIG_X86_64
/*
* Empirically, writing zero to a segment selector on AMD does
* not clear the base, whereas writing zero to a segment
@@ -1414,10 +1413,43 @@ static void detect_null_seg_behavior(str
wrmsrl(MSR_FS_BASE, 1);
loadsegment(fs, 0);
rdmsrl(MSR_FS_BASE, tmp);
- if (tmp != 0)
- set_cpu_bug(c, X86_BUG_NULL_SEG);
wrmsrl(MSR_FS_BASE, old_base);
-#endif
+ return tmp == 0;
+}
+
+void check_null_seg_clears_base(struct cpuinfo_x86 *c)
+{
+ /* BUG_NULL_SEG is only relevant with 64bit userspace */
+ if (!IS_ENABLED(CONFIG_X86_64))
+ return;
+
+ /* Zen3 CPUs advertise Null Selector Clears Base in CPUID. */
+ if (c->extended_cpuid_level >= 0x80000021 &&
+ cpuid_eax(0x80000021) & BIT(6))
+ return;
+
+ /*
+ * CPUID bit above wasn't set. If this kernel is still running
+ * as a HV guest, then the HV has decided not to advertize
+ * that CPUID bit for whatever reason. For example, one
+ * member of the migration pool might be vulnerable. Which
+ * means, the bug is present: set the BUG flag and return.
+ */
+ if (cpu_has(c, X86_FEATURE_HYPERVISOR)) {
+ set_cpu_bug(c, X86_BUG_NULL_SEG);
+ return;
+ }
+
+ /*
+ * Zen2 CPUs also have this behaviour, but no CPUID bit.
+ * 0x18 is the respective family for Hygon.
+ */
+ if ((c->x86 == 0x17 || c->x86 == 0x18) &&
+ detect_null_seg_behavior())
+ return;
+
+ /* All the remaining ones are affected */
+ set_cpu_bug(c, X86_BUG_NULL_SEG);
}
static void generic_identify(struct cpuinfo_x86 *c)
@@ -1453,8 +1485,6 @@ static void generic_identify(struct cpui
get_model_name(c); /* Default name */
- detect_null_seg_behavior(c);
-
/*
* ESPFIX is a strange bug. All real CPUs have it. Paravirt
* systems that run Linux at CPL > 0 may or may not have the
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -73,6 +73,7 @@ extern int detect_extended_topology_earl
extern int detect_extended_topology(struct cpuinfo_x86 *c);
extern int detect_ht_early(struct cpuinfo_x86 *c);
extern void detect_ht(struct cpuinfo_x86 *c);
+extern void check_null_seg_clears_base(struct cpuinfo_x86 *c);
unsigned int aperfmperf_get_khz(int cpu);
--- a/arch/x86/kernel/cpu/hygon.c
+++ b/arch/x86/kernel/cpu/hygon.c
@@ -351,6 +351,8 @@ static void init_hygon(struct cpuinfo_x8
/* Hygon CPUs don't reset SS attributes on SYSRET, Xen does. */
if (!cpu_has(c, X86_FEATURE_XENPV))
set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
+
+ check_null_seg_clears_base(c);
}
static void cpu_detect_tlb_hygon(struct cpuinfo_x86 *c)
From: Tadeusz Struk <[email protected]>
commit 703535e6ae1e94c89a9c1396b4c7b6b41160ef0c upstream.
No need to deduce command size in scsi_setup_scsi_cmnd() anymore as
appropriate checks have been added to scsi_fill_sghdr_rq() function and the
cmd_len should never be zero here. The code to do that wasn't correct
anyway, as it used uninitialized cmd->cmnd, which caused a null-ptr-deref
if the command size was zero as in the trace below. Fix this by removing
the unneeded code.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 1822 Comm: repro Not tainted 5.15.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
Call Trace:
blk_mq_dispatch_rq_list+0x7c7/0x12d0
__blk_mq_sched_dispatch_requests+0x244/0x380
blk_mq_sched_dispatch_requests+0xf0/0x160
__blk_mq_run_hw_queue+0xe8/0x160
__blk_mq_delay_run_hw_queue+0x252/0x5d0
blk_mq_run_hw_queue+0x1dd/0x3b0
blk_mq_sched_insert_request+0x1ff/0x3e0
blk_execute_rq_nowait+0x173/0x1e0
blk_execute_rq+0x15c/0x540
sg_io+0x97c/0x1370
scsi_ioctl+0xe16/0x28e0
sd_ioctl+0x134/0x170
blkdev_ioctl+0x362/0x6e0
block_ioctl+0xb0/0xf0
vfs_ioctl+0xa7/0xf0
do_syscall_64+0x3d/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
---[ end trace 8b086e334adef6d2 ]---
Kernel panic - not syncing: Fatal exception
Link: https://lore.kernel.org/r/[email protected]
Fixes: 2ceda20f0a99 ("scsi: core: Move command size detection out of the fast path")
Cc: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]> # 5.15, 5.14, 5.10
Reported-by: [email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Tadeusz Struk <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_lib.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1193,8 +1193,6 @@ static blk_status_t scsi_setup_scsi_cmnd
}
cmd->cmd_len = scsi_req(req)->cmd_len;
- if (cmd->cmd_len == 0)
- cmd->cmd_len = scsi_command_size(cmd->cmnd);
cmd->cmnd = scsi_req(req)->cmd;
cmd->transfersize = blk_rq_bytes(req);
cmd->allowed = scsi_req(req)->retries;
From: Nehal Bakulchandra Shah <[email protected]>
commit 660a92a59b9e831a0407e41ff62875656d30006e upstream.
AMD's Yellow Carp platform supports runtime power management for
XHCI Controllers, so enable the same by default for all XHCI Controllers.
[ regrouped and aligned the PCI_DEVICE_ID definitions -Mathias]
Cc: stable <[email protected]>
Reviewed-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Reviewed-by: Basavaraj Natikar <[email protected]>
Signed-off-by: Nehal Bakulchandra Shah <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -64,6 +64,13 @@
#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 0x161a
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 0x161b
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 0x161d
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 0x161e
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 0x15d6
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 0x15d7
+
#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042
#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242
@@ -312,6 +319,15 @@ static void xhci_pci_quirks(struct devic
pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
xhci->quirks |= XHCI_NO_SOFT_RETRY;
+ if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+ (pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 ||
+ pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 ||
+ pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
+ pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
+ pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
+ pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6))
+ xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
From: Jan Kara <[email protected]>
commit 839b63860eb3835da165642923120d305925561d upstream.
Patch series "ocfs2: Truncate data corruption fix".
As further testing has shown, commit 5314454ea3f ("ocfs2: fix data
corruption after conversion from inline format") didn't fix all the data
corruption issues the customer started observing after 6dbf7bb55598
("fs: Don't invalidate page buffers in block_write_full_page()") This
time I have tracked them down to two bugs in ocfs2 truncation code.
One bug (truncating page cache before clearing tail cluster and setting
i_size) could cause data corruption even before 6dbf7bb55598, but before
that commit it needed a race with page fault, after 6dbf7bb55598 it
started to be pretty deterministic.
Another bug (zeroing pages beyond old i_size) used to be harmless
inefficiency before commit 6dbf7bb55598. But after commit 6dbf7bb55598
in combination with the first bug it resulted in deterministic data
corruption.
Although fixing only the first problem is needed to stop data
corruption, I've fixed both issues to make the code more robust.
This patch (of 2):
ocfs2_truncate_file() did unmap invalidate page cache pages before
zeroing partial tail cluster and setting i_size. Thus some pages could
be left (and likely have left if the cluster zeroing happened) in the
page cache beyond i_size after truncate finished letting user possibly
see stale data once the file was extended again. Also the tail cluster
zeroing was not guaranteed to finish before truncate finished causing
possible stale data exposure. The problem started to be particularly
easy to hit after commit 6dbf7bb55598 "fs: Don't invalidate page buffers
in block_write_full_page()" stopped invalidation of pages beyond i_size
from page writeback path.
Fix these problems by unmapping and invalidating pages in the page cache
after the i_size is reduced and tail cluster is zeroed out.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/file.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -478,10 +478,11 @@ int ocfs2_truncate_file(struct inode *in
* greater than page size, so we have to truncate them
* anyway.
*/
- unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(inode->i_mapping, new_i_size);
if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
+ unmap_mapping_range(inode->i_mapping,
+ new_i_size + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(inode->i_mapping, new_i_size);
status = ocfs2_truncate_inline(inode, di_bh, new_i_size,
i_size_read(inode), 1);
if (status)
@@ -500,6 +501,9 @@ int ocfs2_truncate_file(struct inode *in
goto bail_unlock_sem;
}
+ unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(inode->i_mapping, new_i_size);
+
status = ocfs2_commit_truncate(osb, inode, di_bh);
if (status < 0) {
mlog_errno(status);
On 11/15/21 9:55 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.80 release.
> There are 575 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Nov 2021 16:52:23 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.80-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Mon, 15 Nov 2021 at 22:54, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.10.80 release.
> There are 575 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Nov 2021 16:52:23 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.80-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.10.80-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: 5c7cb5c1520316c728b44f31c1bd6b22942a0b18
* git describe: v5.10.79-576-g5c7cb5c15203
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.79-576-g5c7cb5c15203
## No regressions (compared to v5.10.79-126-g498eb27d1093)
## No fixes (compared to v5.10.79-126-g498eb27d1093)
## Test result summary
total: 92721, pass: 78619, fail: 559, skip: 12582, xfail: 961
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 290 total, 290 passed, 0 failed
* arm64: 40 total, 40 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 39 total, 39 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 46 passed, 8 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 40 total, 40 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
Hi!
> From: Eric Biggers <[email protected]>
>
> [ Upstream commit 7f595d6a6cdc336834552069a2e0a4f6d4756ddf ]
>
> fscrypt currently requires a 512-bit master key when AES-256-XTS is
> used, since AES-256-XTS keys are 512-bit and fscrypt requires that the
> master key be at least as long any key that will be derived from it.
Quoting Eric Biggers <[email protected]>
I don't expect any problem with backporting this, but I don't see how
this
follows the stable kernel rules
(Documentation/process/stable-kernel-rules.rst).
I don't see what distinguishes this patch from ones that don't get
picked up by
AUTOSEL; it seems pretty arbitrary to me.
- Eric
And I agree, this should not be in stable.
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
Hi!
> From: Alagu Sankar <[email protected]>
>
> [ Upstream commit e263bdab9c0e8025fb7f41f153709a9cda51f6b6 ]
>
> Beacon buffer for high latency devices does not use DMA. other similar
> buffer allocation methods in the driver have already been modified for
> high latency path. Fix the beacon buffer allocation left out in the
> earlier high latency changes.
There's GFP_KERNEL vs. GFP_ATOMIC confusion here:
> @@ -5466,10 +5470,17 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
> if (vif->type == NL80211_IFTYPE_ADHOC ||
> vif->type == NL80211_IFTYPE_MESH_POINT ||
> vif->type == NL80211_IFTYPE_AP) {
> - arvif->beacon_buf = dma_alloc_coherent(ar->dev,
> - IEEE80211_MAX_FRAME_LEN,
> - &arvif->beacon_paddr,
> - GFP_ATOMIC);
> + if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
> + arvif->beacon_buf = kmalloc(IEEE80211_MAX_FRAME_LEN,
> + GFP_KERNEL);
> + arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
> + } else {
> + arvif->beacon_buf =
> + dma_alloc_coherent(ar->dev,
> + IEEE80211_MAX_FRAME_LEN,
> + &arvif->beacon_paddr,
> + GFP_ATOMIC);
> + }
> if (!arvif->beacon_buf) {
> ret = -ENOMEM;
> ath10k_warn(ar, "failed to allocate beacon
> buffer: %d\n",
I'd expect both allocations to use same GFP_ flags.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi!
>
> [ Upstream commit e4625044d656f3c33ece0cc9da22577bc10ca5d3 ]
>
> Fix the build errors reported by the kernel test robot by
> selecting V4L2_ASYNC:
>
> mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove':
> ths8200.c:(.text+0x1ec): undefined reference to `v4l2_async_unregister_subdev'
> mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe':
> ths8200.c:(.text+0x404): undefined reference to
`v4l2_async_register_subdev'
CONFIG_V4L2_ASYNC is not present in 5.10 kernel, this is should not be
applied here.
Best regards,
Pavel
> +++ b/drivers/media/i2c/Kconfig
> @@ -595,6 +595,7 @@ config VIDEO_AK881X
> config VIDEO_THS8200
> tristate "Texas Instruments THS8200 video encoder"
> depends on VIDEO_V4L2 && I2C
> + select V4L2_ASYNC
> help
> Support for the Texas Instruments THS8200 video encoder.
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Tue, Nov 16, 2021 at 01:00:23PM +0100, Pavel Machek wrote:
> Hi!
> >
> > [ Upstream commit e4625044d656f3c33ece0cc9da22577bc10ca5d3 ]
> >
> > Fix the build errors reported by the kernel test robot by
> > selecting V4L2_ASYNC:
> >
> > mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove':
> > ths8200.c:(.text+0x1ec): undefined reference to `v4l2_async_unregister_subdev'
> > mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe':
> > ths8200.c:(.text+0x404): undefined reference to
> `v4l2_async_register_subdev'
>
> CONFIG_V4L2_ASYNC is not present in 5.10 kernel, this is should not be
> applied here.
Dropped from 5.4.y and 5.10.y now, thanks.
greg k-h
Hi Greg,
On Mon, Nov 15, 2021 at 05:55:25PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.80 release.
> There are 575 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Nov 2021 16:52:23 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20211112): 63 configs -> no new failure
arm (gcc version 11.2.1 20211112): 105 configs -> no new failure
arm64 (gcc version 11.2.1 20211112): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20211112): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/392
[2]. https://openqa.qa.codethink.co.uk/tests/389
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
Hi Pavel,
On 16/11/2021 08:59, Pavel Machek wrote:
> There's GFP_KERNEL vs. GFP_ATOMIC confusion here:
>
>> @@ -5466,10 +5470,17 @@ static int ath10k_add_interface(struct
>> ieee80211_hw *hw,
>> if (vif->type == NL80211_IFTYPE_ADHOC ||
>> vif->type == NL80211_IFTYPE_MESH_POINT ||
>> vif->type == NL80211_IFTYPE_AP) {
>> - arvif->beacon_buf = dma_alloc_coherent(ar->dev,
>> - IEEE80211_MAX_FRAME_LEN,
>> - &arvif->beacon_paddr,
>> - GFP_ATOMIC);
>> + if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
>> + arvif->beacon_buf = kmalloc(IEEE80211_MAX_FRAME_LEN,
>> + GFP_KERNEL);
>> + arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
>> + } else {
>> + arvif->beacon_buf =
>> + dma_alloc_coherent(ar->dev,
>> + IEEE80211_MAX_FRAME_LEN,
>> + &arvif->beacon_paddr,
>> + GFP_ATOMIC);
>> + }
>> if (!arvif->beacon_buf) {
>> ret = -ENOMEM;
>> ath10k_warn(ar, "failed to allocate beacon
>> buffer: %d\n",
>
> I'd expect both allocations to use same GFP_ flags.
Good catch.
Let me prepare a patch, test it and submit it soon.
Thanks,
Fabio Estevam
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email:
[email protected]
Hi Greg.
We found a compile error when building tools/testing/selftests/bpf/ on 5.10.
tools/testing/selftests/bpf/prog_tests/sk_lookup.c:1092:15: error: 'struct bpf_sk_lookup' has no member named 'cookie'
1092 | if (CHECK(ctx.cookie == 0, "ctx.cookie", "no socket selected\n"))
It requires 7c32e8f8bc33 ("bpf: Add PROG_TEST_RUN support for sk_lookup programs") from upstream.
Maybe the left patches of this patchset are needed for 5.10 LTS?
https://lore.kernel.org/bpf/[email protected]/
Thanks.
On Mon, Jul 25, 2022 at 10:53:38AM +0800, Tianchen Ding wrote:
> Hi Greg.
>
> We found a compile error when building tools/testing/selftests/bpf/ on 5.10.
>
> tools/testing/selftests/bpf/prog_tests/sk_lookup.c:1092:15: error: 'struct bpf_sk_lookup' has no member named 'cookie'
> 1092 | if (CHECK(ctx.cookie == 0, "ctx.cookie", "no socket selected\n"))
>
> It requires 7c32e8f8bc33 ("bpf: Add PROG_TEST_RUN support for sk_lookup programs") from upstream.
>
> Maybe the left patches of this patchset are needed for 5.10 LTS?
> https://lore.kernel.org/bpf/[email protected]/
If so, please submit them with the git commit ids so that I can fix this
up.
thanks,
greg k-h
On 2022/7/27 18:10, Greg KH wrote:
> On Mon, Jul 25, 2022 at 10:53:38AM +0800, Tianchen Ding wrote:
>> Hi Greg.
>>
>> We found a compile error when building tools/testing/selftests/bpf/ on 5.10.
>>
>> tools/testing/selftests/bpf/prog_tests/sk_lookup.c:1092:15: error: 'struct bpf_sk_lookup' has no member named 'cookie'
>> 1092 | if (CHECK(ctx.cookie == 0, "ctx.cookie", "no socket selected\n"))
>>
>> It requires 7c32e8f8bc33 ("bpf: Add PROG_TEST_RUN support for sk_lookup programs") from upstream.
>>
>> Maybe the left patches of this patchset are needed for 5.10 LTS?
>> https://lore.kernel.org/bpf/[email protected]/
>
> If so, please submit them with the git commit ids so that I can fix this
> up.
>
> thanks,
>
> greg k-h
These 2 commits from upstream are necessary for bpf selftests build pass on 5.10.y:
607b9cc92bd7208338d714a22b8082fe83bcb177 bpf: Consolidate shared test timing code
7c32e8f8bc33a5f4b113a630857e46634e3e143b bpf: Add PROG_TEST_RUN support for sk_lookup programs
This commit does not impact building stage, but can avoid a test case failure (by skipping it):
b4f894633fa14d7d46ba7676f950b90a401504bb selftests: bpf: Don't run sk_lookup in verifier tests
Thanks.
On 2022/7/28 11:03, Tianchen Ding wrote:
> On 2022/7/27 18:10, Greg KH wrote:
>> On Mon, Jul 25, 2022 at 10:53:38AM +0800, Tianchen Ding wrote:
>>> Hi Greg.
>>>
>>> We found a compile error when building tools/testing/selftests/bpf/ on 5.10.
>>>
>>> tools/testing/selftests/bpf/prog_tests/sk_lookup.c:1092:15: error: 'struct bpf_sk_lookup' has no member named 'cookie'
>>> 1092 | if (CHECK(ctx.cookie == 0, "ctx.cookie", "no socket selected\n"))
>>>
>>> It requires 7c32e8f8bc33 ("bpf: Add PROG_TEST_RUN support for sk_lookup programs") from upstream.
>>>
>>> Maybe the left patches of this patchset are needed for 5.10 LTS?
>>> https://lore.kernel.org/bpf/[email protected]/
>>
>> If so, please submit them with the git commit ids so that I can fix this
>> up.
>>
>> thanks,
>>
>> greg k-h
>
> These 2 commits from upstream are necessary for bpf selftests build pass on 5.10.y:
> 607b9cc92bd7208338d714a22b8082fe83bcb177 bpf: Consolidate shared test timing code
> 7c32e8f8bc33a5f4b113a630857e46634e3e143b bpf: Add PROG_TEST_RUN support for sk_lookup programs
>
> This commit does not impact building stage, but can avoid a test case failure (by skipping it):
> b4f894633fa14d7d46ba7676f950b90a401504bb selftests: bpf: Don't run sk_lookup in verifier tests
>
> Thanks.
Or should I submit complete patches?
On Thu, Jul 28, 2022 at 11:09:32AM +0800, Tianchen Ding wrote:
> On 2022/7/28 11:03, Tianchen Ding wrote:
> > On 2022/7/27 18:10, Greg KH wrote:
> > > On Mon, Jul 25, 2022 at 10:53:38AM +0800, Tianchen Ding wrote:
> > > > Hi Greg.
> > > >
> > > > We found a compile error when building tools/testing/selftests/bpf/ on 5.10.
> > > >
> > > > tools/testing/selftests/bpf/prog_tests/sk_lookup.c:1092:15: error: 'struct bpf_sk_lookup' has no member named 'cookie'
> > > > ? 1092 |? if (CHECK(ctx.cookie == 0, "ctx.cookie", "no socket selected\n"))
> > > >
> > > > It requires 7c32e8f8bc33 ("bpf: Add PROG_TEST_RUN support for sk_lookup programs") from upstream.
> > > >
> > > > Maybe the left patches of this patchset are needed for 5.10 LTS?
> > > > https://lore.kernel.org/bpf/[email protected]/
> > >
> > > If so, please submit them with the git commit ids so that I can fix this
> > > up.
> > >
> > > thanks,
> > >
> > > greg k-h
> >
> > These 2 commits from upstream are necessary for bpf selftests build pass on 5.10.y:
> > 607b9cc92bd7208338d714a22b8082fe83bcb177 bpf: Consolidate shared test timing code
> > 7c32e8f8bc33a5f4b113a630857e46634e3e143b bpf: Add PROG_TEST_RUN support for sk_lookup programs
> >
> > This commit does not impact building stage, but can avoid a test case failure (by skipping it):
> > b4f894633fa14d7d46ba7676f950b90a401504bb selftests: bpf: Don't run sk_lookup in verifier tests
> >
> > Thanks.
>
> Or should I submit complete patches?
Yes, please submit complete patches.
thanks,
greg k-h