This is the start of the stable review cycle for the 5.8.17 release.
There are 633 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 29 Oct 2020 13:53:43 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.8.17-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.8.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.8.17-rc1
Lorenzo Colitti <[email protected]>
usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets.
Christian Eggers <[email protected]>
eeprom: at25: set minimum read/write access stride to 1
Peter Chen <[email protected]>
usb: cdns3: gadget: free interrupt after gadget has deleted
Oliver Neukum <[email protected]>
USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().
Vincent Mailhol <[email protected]>
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
Chunfeng Yun <[email protected]>
usb: gadget: bcm63xx_udc: fix up the error of undeclared usb_debug_root
Peng Fan <[email protected]>
tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
Peng Fan <[email protected]>
tty: serial: lpuart: fix lpuart32_write usage
Julian Wiedmann <[email protected]>
s390/qeth: don't let HW override the configured port role
Valentin Vidic <[email protected]>
net: korina: cast KSEG0 address to pointer in kfree
Zekun Shen <[email protected]>
ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()
Serge Semin <[email protected]>
dmaengine: dw: Activate FIFO-mode for memory peripherals only
Serge Semin <[email protected]>
dmaengine: dw: Add DMA-channels mask cell support
Qingqing Zhuo <[email protected]>
drm/amd/display: Screen corruption on dual displays (DP+USB-C)
Can Guo <[email protected]>
scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()
Eli Billauer <[email protected]>
usb: core: Solve race condition in anchor cleanup functions
Wang Yufen <[email protected]>
brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach
Kevin Barnett <[email protected]>
scsi: smartpqi: Avoid crashing kernel for controller issues
Sathyanarayana Nujella <[email protected]>
ASoC: Intel: sof_rt5682: override quirk data for tgl_max98373_rt5682
Sathyanarayana Nujella <[email protected]>
ASoC: SOF: Add topology filename override based on dmi data match
Connor McAdams <[email protected]>
ALSA: hda/ca0132 - Add new quirk ID for SoundBlaster AE-7.
Connor McAdams <[email protected]>
ALSA: hda/ca0132 - Add AE-7 microphone selection commands.
Tetsuo Handa <[email protected]>
mwifiex: don't call del_timer_sync() on uninitialized timer
Julian Wiedmann <[email protected]>
s390/qeth: strictly order bridge address events
Jan Kara <[email protected]>
reiserfs: Fix memory leak in reiserfs_parse_options()
Peilin Ye <[email protected]>
ipvs: Fix uninit-value in do_ip_vs_set_ctl()
Dinghao Liu <[email protected]>
Bluetooth: btusb: Fix memleak in btusb_mtk_submit_wmt_recv_urb
Tong Zhang <[email protected]>
tty: ipwireless: fix error handling
George Kennedy <[email protected]>
fbmem: add margin check to fb_check_caps()
Nilesh Javali <[email protected]>
scsi: qedi: Fix list_del corruption while removing active I/O
Nilesh Javali <[email protected]>
scsi: qedi: Protect active command list to avoid list corruption
Nilesh Javali <[email protected]>
scsi: qedi: Mark all connections for recovery on link down event
Saurav Kashyap <[email protected]>
scsi: qedf: Return SUCCESS if stale rport is encountered
Hans de Goede <[email protected]>
HID: ite: Add USB id match for Acer One S1003 keyboard dock
Doug Horn <[email protected]>
Fix use after free in get_capset_info callback.
Chris Chiu <[email protected]>
rtl8xxxu: prevent potential memory leak
Keita Suzuki <[email protected]>
brcmsmac: fix memory leak in wlc_phy_attach_lcnphy
Yonghong Song <[email protected]>
selftests/bpf: Fix test_sysctl_loop{1, 2} failure due to clang change
Daniel Wagner <[email protected]>
scsi: qla2xxx: Warn if done() or free() are called on an already freed srb
Jing Xiangfeng <[email protected]>
scsi: ibmvfc: Fix error return in ibmvfc_probe()
Qian Cai <[email protected]>
iomap: fix WARN_ON_ONCE() from unprivileged users
Zhenzhong Duan <[email protected]>
drm/msm/a6xx: fix a potential overflow issue
Abhishek Pandit-Subedi <[email protected]>
Bluetooth: Only mark socket zapped after unlocking
Jia Yang <[email protected]>
drm: fix double free for gbo in drm_gem_vram_init and drm_gem_vram_create
Hamish Martin <[email protected]>
usb: ohci: Default to per-port over-current protection
Darrick J. Wong <[email protected]>
xfs: make sure the rt allocator doesn't run off the end
Viresh Kumar <[email protected]>
opp: Prevent memory leak in dev_pm_opp_attach_genpd()
Eric Biggers <[email protected]>
reiserfs: only call unlock_new_inode() if I_NEW
Keita Suzuki <[email protected]>
misc: rtsx: Fix memory leak in rtsx_pci_probe
Maciej Fijalkowski <[email protected]>
bpf: Limit caller's stack depth 256 for subprogs with tailcalls
Neil Armstrong <[email protected]>
drm/panfrost: add support for vendor quirk
Neil Armstrong <[email protected]>
drm/panfrost: add amlogic reset quirk callback
Neil Armstrong <[email protected]>
drm/panfrost: add Amlogic GPU integration quirks
Brooke Basile <[email protected]>
ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()
Mikael Wikström <[email protected]>
HID: multitouch: Lenovo X1 Tablet Gen3 trackpoint and buttons
Joakim Zhang <[email protected]>
can: flexcan: flexcan_chip_stop(): add error handling and propagate error value
Oded Gabbay <[email protected]>
habanalabs: cast to u64 before shift > 31 bits
Mauro Carvalho Chehab <[email protected]>
usb: dwc3: simple: add support for Hikey 970
Johan Hovold <[email protected]>
USB: cdc-acm: handle broken union descriptors
Alan Maguire <[email protected]>
selftests/bpf: Fix overflow tests to reflect iter size increase
Tzu-En Huang <[email protected]>
rtw88: increse the size of rx buffer size
Jan Kara <[email protected]>
udf: Avoid accessing uninitialized data on failed inode read
Jan Kara <[email protected]>
udf: Limit sparing table size
Kai-Heng Feng <[email protected]>
rtw88: pci: Power cycle device during shutdown
Zqiang <[email protected]>
usb: gadget: function: printer: fix use-after-free in __lock_acquire
Yu Chen <[email protected]>
usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
Sherry Sun <[email protected]>
misc: vop: add round_up(x,4) for vring_size to avoid kernel panic
Sherry Sun <[email protected]>
mic: vop: copy data to kernel space then write to io memory
Roman Bolshakov <[email protected]>
scsi: target: core: Add CONTROL field for trace events
Jing Xiangfeng <[email protected]>
scsi: mvumi: Fix error return in mvumi_io_attach()
Christoph Hellwig <[email protected]>
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
Song Liu <[email protected]>
bpf: Use raw_spin_trylock() for pcpu_freelist_push/pop in NMI
Hangbin Liu <[email protected]>
libbpf: Close map fd if init map slots failed
Jérôme Pouiller <[email protected]>
staging: wfx: fix handling of MMIC error
Thomas Pedersen <[email protected]>
mac80211: handle lack of sband->bitrates in rates
Cong Wang <[email protected]>
ip_gre: set dev->hard_header_len and dev->needed_headroom properly
Rustam Kovhaev <[email protected]>
ntfs: add check for mft record size in superblock
Dinghao Liu <[email protected]>
media: venus: core: Fix runtime PM imbalance in venus_probe
Rajendra Nayak <[email protected]>
media: venus: core: Fix error handling in probe
Alexander Aring <[email protected]>
fs: dlm: fix configfs memory leak
Vikash Garodia <[email protected]>
media: venus: fixes for list corruption
Dinghao Liu <[email protected]>
media: atomisp: fix memleak in ia_css_stream_create
Mauro Carvalho Chehab <[email protected]>
media: saa7134: avoid a shift overflow
Pali Rohár <[email protected]>
mmc: sdio: Check for CISTPL_VERS_1 buffer size
Adam Goode <[email protected]>
media: uvcvideo: Ensure all probed info is returned to v4l2
Borislav Petkov <[email protected]>
x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
Brad Bishop <[email protected]>
spi: fsi: Fix clock running too fast
Longfang Liu <[email protected]>
crypto: hisilicon - fixed memory allocation error
Borislav Petkov <[email protected]>
x86/mce: Annotate mce_rd/wrmsrl() with noinstr
Xiaolong Huang <[email protected]>
media: media/pci: prevent memory leak in bttv_probe
Dinghao Liu <[email protected]>
media: bdisp: Fix runtime PM imbalance on error
Dinghao Liu <[email protected]>
media: platform: sti: hva: Fix runtime PM imbalance on error
Dinghao Liu <[email protected]>
media: platform: s3c-camif: Fix runtime PM imbalance on error
Dinghao Liu <[email protected]>
media: vsp1: Fix runtime PM imbalance on error
Qiushi Wu <[email protected]>
media: exynos4-is: Fix a reference count leak
Qiushi Wu <[email protected]>
media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync
Qiushi Wu <[email protected]>
media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync
Qiushi Wu <[email protected]>
media: sti: Fix reference count leaks
Aditya Pakki <[email protected]>
media: st-delta: Fix reference count leak in delta_run_work
Oliver Neukum <[email protected]>
media: ati_remote: sanity check for both endpoints
Pavel Machek <[email protected]>
media: firewire: fix memory leak
Borislav Petkov <[email protected]>
x86/mce: Add Skylake quirk for patrol scrub reported errors
Arvind Sankar <[email protected]>
x86/asm: Replace __force_order with a memory clobber
Pavel Machek <[email protected]>
crypto: ccp - fix error handling
Mark Mossberg <[email protected]>
x86/dumpstack: Fix misleading instruction pointer error message
Tetsuo Handa <[email protected]>
block: ratelimit handle_bad_sector() message
Zhao Heming <[email protected]>
md/bitmap: fix memory leak of temporary bitmap
Hans de Goede <[email protected]>
i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
Al Grant <[email protected]>
perf: correct SNOOPX field offset
Juri Lelli <[email protected]>
sched/features: Fix !CONFIG_JUMP_LABEL case
Dinghao Liu <[email protected]>
ntb: intel: Fix memleak in intel_ntb_pci_probe
Kaige Li <[email protected]>
NTB: hw: amd: fix an issue about leak system resources
Vitaly Kuznetsov <[email protected]>
KVM: ioapic: break infinite recursion on lazy EOI
zhenwei pi <[email protected]>
nvmet: fix uninitialized work for zero kato
Ganesh Goudar <[email protected]>
powerpc/pseries: Avoid using addr_to_pfn in real mode
Vasant Hegde <[email protected]>
powerpc/powernv/dump: Fix race while processing OPAL dump
Colin Ian King <[email protected]>
lightnvm: fix out-of-bounds write to array devices->info[]
Martin Blumenstingl <[email protected]>
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
Michal Simek <[email protected]>
arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
Dennis YC Hsieh <[email protected]>
drm/mediatek: reduce clear event
Dennis YC Hsieh <[email protected]>
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
Biju Das <[email protected]>
ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
Marek Vasut <[email protected]>
ARM: dts: stm32: Fix DH PDK2 display PWM channel
Marek Vasut <[email protected]>
ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM
Marek Vasut <[email protected]>
ARM: dts: stm32: Move ethernet PHY into DH SoM DT
Holger Assmann <[email protected]>
ARM: dts: stm32: lxa-mc1: Fix kernel warning about PHY delays
Marek Vasut <[email protected]>
ARM: dts: stm32: Fix sdmmc2 pins on AV96
Tony Lindgren <[email protected]>
ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
Krzysztof Kozlowski <[email protected]>
soc: fsl: qbman: Fix return value on success
Cristian Ciocaltea <[email protected]>
ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers
Amit Singh Tomar <[email protected]>
arm64: dts: actions: limit address range for pinctrl node
Hsin-Yi Wang <[email protected]>
arm64: dts: mt8173: elm: Fix nor_flash node property
Geert Uytterhoeven <[email protected]>
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
Geert Uytterhoeven <[email protected]>
arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
Corentin Labbe <[email protected]>
dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset
Sibi Sankar <[email protected]>
soc: qcom: apr: Fixup the error displayed on lookup failure
Stephan Gerhold <[email protected]>
arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
Stephan Gerhold <[email protected]>
arm64: dts: qcom: pm8916: Remove invalid reg size from wcd_codec
Stephan Gerhold <[email protected]>
arm64: dts: qcom: msm8916: Remove one more thermal trip point unit name
Sibi Sankar <[email protected]>
soc: qcom: pdr: Fixup array type of get_domain_list_resp message
Stephen Boyd <[email protected]>
arm64: dts: qcom: sc7180: Drop flags on mdss irqs
Krzysztof Kozlowski <[email protected]>
arm64: dts: imx8mq: Add missing interrupts to GPC
Sudeep Holla <[email protected]>
firmware: arm_scmi: Fix NULL pointer dereference in mailbox_chan_free
Krzysztof Kozlowski <[email protected]>
memory: fsl-corenet-cf: Fix handling of platform_get_irq() error
Sai Prakash Ranjan <[email protected]>
arm64: dts: qcom: sc7180: Fix the LLCC base register size
YueHaibing <[email protected]>
memory: omap-gpmc: Fix build error without CONFIG_OF
Dan Carpenter <[email protected]>
memory: omap-gpmc: Fix a couple off by ones
Qiang Yu <[email protected]>
arm64: dts: allwinner: h5: remove Mali GPU PMU module
Jernej Skrabec <[email protected]>
ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
Arnd Bergmann <[email protected]>
ARM: s3c24xx: fix mmc gpio lookup tables
Claudiu Beznea <[email protected]>
ARM: at91: pm: of_node_put() after its usage
Horia Geantă <[email protected]>
ARM: dts: imx6sl: fix rng node
Jerome Brunet <[email protected]>
arm64: dts: meson: vim3: correct led polarity
Dan Carpenter <[email protected]>
soc: xilinx: Fix error code in zynqmp_pm_probe()
Pablo Neira Ayuso <[email protected]>
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
Ard Biesheuvel <[email protected]>
netsec: ignore 'phy-mode' device property on ACPI systems
Timothée COCAULT <[email protected]>
netfilter: ebtables: Fixes dropping of small packets in bridge nat
Francesco Ruggeri <[email protected]>
netfilter: conntrack: connection timeout after re-register
Ard Biesheuvel <[email protected]>
arm64: mm: use single quantity to represent the PA to VA translation
Jing Xiangfeng <[email protected]>
scsi: bfa: Fix error return in bfad_pci_init()
Robert Hoo <[email protected]>
KVM: x86: emulating RDPID failure shall return #UD rather than #GP
Krzysztof Kozlowski <[email protected]>
Input: sun4i-ps2 - fix handling of platform_get_irq() error
Krzysztof Kozlowski <[email protected]>
Input: twl4030_keypad - fix handling of platform_get_irq() error
Krzysztof Kozlowski <[email protected]>
Input: omap4-keypad - fix handling of platform_get_irq() error
Krzysztof Kozlowski <[email protected]>
Input: ep93xx_keypad - fix handling of platform_get_irq() error
YueHaibing <[email protected]>
Input: stmfts - fix a & vs && typo
Dan Carpenter <[email protected]>
Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()
Johnny Chuang <[email protected]>
Input: elants_i2c - fix typo for an attribute to show calibration count
Gwendal Grignou <[email protected]>
platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
Martijn de Gouw <[email protected]>
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
Abel Vesa <[email protected]>
clk: imx8mq: Fix usdhc parents order
Xiaoyang Xu <[email protected]>
vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
Alex Williamson <[email protected]>
vfio/pci: Clear token on bypass registration failure
Darrick J. Wong <[email protected]>
ext4: limit entries returned when counting fsmap records
Xiao Yang <[email protected]>
ext4: disallow modifying DAX inode flag if inline_data has been set
Jan Kara <[email protected]>
ext4: discard preallocations before releasing group lock
Ye Bin <[email protected]>
ext4: fix dead loop in ext4_mb_new_blocks
Dan Aloni <[email protected]>
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
Guenter Roeck <[email protected]>
watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3
Dinghao Liu <[email protected]>
watchdog: Use put_device on error
Dinghao Liu <[email protected]>
watchdog: Fix memleak in watchdog_cdev_register
Masahiro Yamada <[email protected]>
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
Navid Emamdoost <[email protected]>
clk: bcm2835: add missing release if devm_clk_hw_register fails
Claudiu Beznea <[email protected]>
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
Daniel Jordan <[email protected]>
module: statically initialize init section freeing data
Hanks Chen <[email protected]>
clk: mediatek: add UART0 clock support
Stephen Boyd <[email protected]>
clk: rockchip: Initialize hw to error to avoid undefined behavior
Dexuan Cui <[email protected]>
PCI: hv: Fix hibernation in case interrupts are not re-created
Colin Ian King <[email protected]>
remoteproc/mediatek: fix null pointer dereference on null scp pointer
Hauke Mehrtens <[email protected]>
pwm: img: Fix null pointer access in probe
Simon South <[email protected]>
pwm: rockchip: Keep enabled PWMs running while probing
Tero Kristo <[email protected]>
clk: keystone: sci-clk: fix parsing assigned-clock data during probe
Konrad Dybcio <[email protected]>
clk: qcom: gcc-sdm660: Fix wrong parent_map
Yan Zhao <[email protected]>
vfio/type1: fix dirty bitmap calculation in vfio_dma_rw
Yan Zhao <[email protected]>
vfio: fix a missed vfio group put in vfio_pin_pages
Matthew Rosato <[email protected]>
vfio/pci: Decouple PCI_COMMAND_MEMORY bit checks from is_virtfn
Matthew Rosato <[email protected]>
s390/pci: Mark all VFs as not implementing PCI_COMMAND_MEMORY
Yan Zhao <[email protected]>
vfio: add a singleton check for vfio_group_pin_pages
Matthew Rosato <[email protected]>
PCI/IOV: Mark VFs as not implementing PCI_COMMAND_MEMORY
Nicolas Boichat <[email protected]>
rpmsg: Avoid double-free in mtk_rpmsg_register_device
Dan Carpenter <[email protected]>
rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
Mark Tomlinson <[email protected]>
PCI: iproc: Set affinity mask on MSI interrupts
Pali Rohár <[email protected]>
PCI: aardvark: Check for errors from pci_bridge_emul_init() call
Pali Rohár <[email protected]>
PCI: aardvark: Fix compilation on s390
Hou Zhiqiang <[email protected]>
PCI: designware-ep: Fix the Header Type check
Stefan Agner <[email protected]>
clk: meson: g12a: mark fclk_div2 as critical
Dirk Behme <[email protected]>
i2c: rcar: Auto select RESET_CONTROLLER
Chris Packham <[email protected]>
rtc: ds1307: Clear OSF flag on DS1388 when setting time
Jerome Brunet <[email protected]>
clk: meson: axg-audio: separate axg and g12a regmap tables
Jassi Brar <[email protected]>
mailbox: avoid timer start from callback
Jing Xiangfeng <[email protected]>
rapidio: fix the missed put_device() for rio_mport_add_riodev
Souptick Joarder <[email protected]>
rapidio: fix error handling path
Matthew Wilcox (Oracle) <[email protected]>
ramfs: fix nommu mmap with gaps in the page cache
Tobias Jordan <[email protected]>
lib/crc32.c: fix trivial typo in preprocessor condition
Matthew Wilcox (Oracle) <[email protected]>
mm/page_owner: change split_page_owner to take a count
Bob Pearson <[email protected]>
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
David Howells <[email protected]>
afs: Fix cell removal
David Howells <[email protected]>
afs: Fix cell purging with aliases
David Howells <[email protected]>
afs: Fix cell refcounting by splitting the usage counter
David Howells <[email protected]>
afs: Fix rapid cell addition/removal by not using RCU on cells tree
Jamie Iles <[email protected]>
f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info
Oliver O'Halloran <[email protected]>
selftests/powerpc: Fix eeh-basic.sh exit codes
Jiri Slaby <[email protected]>
perf trace: Fix off by ones in memset() after realloc() in arches using libaudit
Krzysztof Kozlowski <[email protected]>
maiblox: mediatek: Fix handling of platform_get_irq() error
Johannes Berg <[email protected]>
um: time-travel: Fix IRQ handling in time_travel_handle_message()
Tiezhu Yang <[email protected]>
um: vector: Use GFP_ATOMIC under spin lock
Eric Biggers <[email protected]>
f2fs: reject CASEFOLD inode flag without casefold feature
Bob Pearson <[email protected]>
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
Colin Ian King <[email protected]>
IB/rdmavt: Fix sizeof mismatch
Srikar Dronamraju <[email protected]>
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
Vaibhav Jain <[email protected]>
powerpc/papr_scm: Add PAPR command family to pass-through command-set
Jing Xiangfeng <[email protected]>
i3c: master: Fix error return in cdns_i3c_master_probe()
Namhyung Kim <[email protected]>
perf stat: Fix out of bounds CPU map access when handling armv8_pmu events
Kajol Jain <[email protected]>
powerpc/perf/hv-gpci: Fix starting index value
Athira Rajeev <[email protected]>
powerpc/perf: Exclude pmc5/6 from the irrelevant PMU group constraints
Nicholas Piggin <[email protected]>
powerpc/64: fix irq replay pt_regs->softe value
Nicholas Piggin <[email protected]>
powerpc/64: fix irq replay missing preempt
Kamal Heib <[email protected]>
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
Leon Romanovsky <[email protected]>
overflow: Include header file with SIZE_MAX declaration
Daniel Thompson <[email protected]>
kdb: Fix pager search for multi-line strings
Janusz Krzysztofik <[email protected]>
mtd: rawnand: ams-delta: Fix non-OF build warning
Hauke Mehrtens <[email protected]>
mtd: spinand: gigadevice: Add QE Bit
Hauke Mehrtens <[email protected]>
mtd: spinand: gigadevice: Only one dummy byte in QUADIO
Evgeny Novikov <[email protected]>
mtd: rawnand: vf610: disable clk on error handling path in probe
Christophe Kerello <[email protected]>
mtd: rawnand: stm32_fmc2: fix a buffer overflow
Vignesh Raghavendra <[email protected]>
mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash access
Weihang Li <[email protected]>
RDMA/hns: Fix missing sq_sig_type when querying QP
Weihang Li <[email protected]>
RDMA/hns: Fix configuration of ack_req_freq in QPC
Wenpeng Liang <[email protected]>
RDMA/hns: Fix the wrong value of rnr_retry when querying qp
Jiaran Zhang <[email protected]>
RDMA/hns: Solve the overflow of the calc_pg_sz()
Jiaran Zhang <[email protected]>
RDMA/hns: Add check for the validity of sl configuration
Jin Yao <[email protected]>
perf stat: Skip duration_time in setup_system_wide
Sindhu, Devale <[email protected]>
i40iw: Add support to make destroy QP synchronous
Jason Gunthorpe <[email protected]>
RDMA/mlx5: Disable IB_DEVICE_MEM_MGT_EXTENSIONS if IB_WR_REG_MR can't work
Jason Gunthorpe <[email protected]>
RDMA/mlx5: Make mkeys always owned by the kernel's PD when not enabled
Jason Gunthorpe <[email protected]>
RDMA/mlx5: Use set_mkc_access_pd_addr_fields() in reg_create()
Lijun Ou <[email protected]>
RDMA/hns: Set the unsupported wr opcode
Keita Suzuki <[email protected]>
RDMA/qedr: Fix resource leak in qedr_create_qp
Adrian Hunter <[email protected]>
perf intel-pt: Fix "context_switch event has no tid" error
Jason Gunthorpe <[email protected]>
RDMA/cma: Fix use after free race in roce multicast join
Jason Gunthorpe <[email protected]>
RDMA/cma: Consolidate the destruction of a cma_multicast in one place
Jason Gunthorpe <[email protected]>
RDMA/cma: Remove dead code for kernel rdmacm multicast
Jason Gunthorpe <[email protected]>
RDMA/cma: Combine cma_ndev_work with cma_work
Nicholas Piggin <[email protected]>
powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mm
Christophe Leroy <[email protected]>
powerpc/kasan: Fix CONFIG_KASAN_VMALLOC for 8xx
Finn Thain <[email protected]>
powerpc/tau: Disable TAU between measurements
Finn Thain <[email protected]>
powerpc/tau: Check processor type before enabling TAU interrupt
Finn Thain <[email protected]>
powerpc/tau: Remove duplicated set_thresholds() call
Finn Thain <[email protected]>
powerpc/tau: Convert from timer to workqueue
Finn Thain <[email protected]>
powerpc/tau: Use appropriate temperature sample interval
Aneesh Kumar K.V <[email protected]>
powerpc/book3s64/hash/4k: Support large linear mapping range with 4K
Ravi Bangoria <[email protected]>
powerpc/watchpoint: Add hw_len wherever missing
Ravi Bangoria <[email protected]>
powerpc/watchpoint: Fix handling of vector instructions
Ravi Bangoria <[email protected]>
powerpc/watchpoint: Fix quadword instruction handling on p10 predecessors
Thiago Jung Bauermann <[email protected]>
powerpc/pseries/svm: Allocate SWIOTLB buffer anywhere in memory
Michal Kalderon <[email protected]>
RDMA/qedr: Fix inline size returned for iWARP
Michal Kalderon <[email protected]>
RDMA/qedr: Fix return code if accept is called on a destroyed qp
Michal Kalderon <[email protected]>
RDMA/qedr: Fix use of uninitialized field
Michal Kalderon <[email protected]>
RDMA/qedr: Fix doorbell setting
Michal Kalderon <[email protected]>
RDMA/qedr: Fix qp structure memory leak
Jason Gunthorpe <[email protected]>
RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()
Jason Gunthorpe <[email protected]>
RDMA/umem: Fix ib_umem_find_best_pgsz() for mappings that cross a page boundary
Leon Romanovsky <[email protected]>
RDMA: Allow fail of destroy CQ
Leon Romanovsky <[email protected]>
RDMA/core: Delete function indirection for alloc/free kernel CQ
Md Haris Iqbal <[email protected]>
RDMA/rtrs-srv: Incorporate ib_register_client into rtrs server init
Darrick J. Wong <[email protected]>
xfs: fix high key handling in the rt allocator's query_range function
Scott Mayhew <[email protected]>
nfs: add missing "posix" local_lock constant table definition
Darrick J. Wong <[email protected]>
xfs: fix deadlock and streamline xfs_getfsmap performance
Darrick J. Wong <[email protected]>
xfs: limit entries returned when counting fsmap records
Matthew Wilcox (Oracle) <[email protected]>
ida: Free allocated bitmap in error path
Necip Fazil Yildiran <[email protected]>
arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER
Greg Ungerer <[email protected]>
m68knommu: include SDHC support only when hardware has it
Dave Chinner <[email protected]>
xfs: fix finobt btree block recovery ordering
Guillaume Tucker <[email protected]>
ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values
Arnaldo Carvalho de Melo <[email protected]>
tools feature: Add missing -lzstd to the fast path feature detection
Arnaldo Carvalho de Melo <[email protected]>
perf tools: Make GTK2 support opt-in
Mark Tomlinson <[email protected]>
mtd: mtdoops: Don't write panic data twice
Leon Romanovsky <[email protected]>
RDMA/mlx5: Fix potential race between destroy and CQE poll
Scott Cheloha <[email protected]>
pseries/drmem: don't cache node id in drmem_lmb struct
Nathan Lynch <[email protected]>
powerpc/pseries: explicitly reschedule during drmem_lmb list traversal
Jason Gunthorpe <[email protected]>
RDMA/umem: Fix signature of stub ib_umem_find_best_pgsz()
Lang Cheng <[email protected]>
RDMA/hns: Add a check for current state before modifying QP
Arnd Bergmann <[email protected]>
mtd: lpddr: fix excessive stack usage with clang
Jason Gunthorpe <[email protected]>
RDMA/ucma: Add missing locking around rdma_leave_multicast()
Jason Gunthorpe <[email protected]>
RDMA/ucma: Fix locking for ctx->events_reported
Paul E. McKenney <[email protected]>
rcutorture: Properly set rcu_fwds for OOM handling
Neeraj Upadhyay <[email protected]>
rcu/tree: Force quiescent state on callback overload
Nicholas Mc Guire <[email protected]>
powerpc/icp-hv: Fix missing of_node_put() in success path
Nicholas Mc Guire <[email protected]>
powerpc/pseries: Fix missing of_node_put() in rng_init()
Håkon Bugge <[email protected]>
IB/mlx4: Adjust delayed work when a dup is observed
Håkon Bugge <[email protected]>
IB/mlx4: Fix starvation in paravirt mux/demux
Parshuram Thombare <[email protected]>
i3c: master add i3c_master_attach_boardinfo to preserve boardinfo
Tom Zanussi <[email protected]>
tracing: Handle synthetic event array field type checking correctly
Tom Zanussi <[email protected]>
selftests/ftrace: Change synthetic event name for inter-event-combined test
Andrii Nakryiko <[email protected]>
fs: fix NULL dereference due to data race in prepend_path()
Suren Baghdasaryan <[email protected]>
mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
Ralph Campbell <[email protected]>
mm/memcg: fix device private memcg accounting
Miaohe Lin <[email protected]>
mm/swapfile.c: fix potential memory leak in sys_swapon
Pablo Neira Ayuso <[email protected]>
netfilter: nf_log: missing vlan offload tag and proto
Valentin Vidic <[email protected]>
net: korina: fix kfree of rx/tx descriptor array
John Fastabend <[email protected]>
bpf, sockmap: Remove skb_orphan and let normal skb_kfree do cleanup
Julian Anastasov <[email protected]>
ipvs: clear skb->tstamp in forwarding path
Christian Hewitt <[email protected]>
drm/panfrost: increase readl_relaxed_poll_timeout values
Tom Rix <[email protected]>
mwifiex: fix double free
Vadim Pasternak <[email protected]>
platform/x86: mlx-platform: Remove PSU EEPROM configuration
Tom Zanussi <[email protected]>
tracing: Fix parse_synth_field() error handling
Tianjia Zhang <[email protected]>
ipmi_si: Fix wrong return value in try_smi_init()
Logan Gunthorpe <[email protected]>
dmaengine: ioat: Allocate correct size for descriptor chunk
Dan Carpenter <[email protected]>
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
John Donnelly <[email protected]>
scsi: target: tcmu: Fix warning: 'page' may be used uninitialized
Minas Harutyunyan <[email protected]>
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
Johannes Berg <[email protected]>
nl80211: fix non-split wiphy information
Necip Fazil Yildiran <[email protected]>
ocxl: fix kconfig dependency warning for OCXL
Manivannan Sadhasivam <[email protected]>
bus: mhi: core: Fix the building of MHI module
Lorenzo Colitti <[email protected]>
usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well
Yoshihiro Shimoda <[email protected]>
usb: gadget: u_serial: clear suspended flag when disconnecting
Lorenzo Colitti <[email protected]>
usb: gadget: f_ncm: fix ncm_bitrate for SuperSpeed and above.
Mordechay Goodstein <[email protected]>
iwlwifi: dbg: run init_cfg function once per driver load
Mordechay Goodstein <[email protected]>
iwlwifi: dbg: remove no filter condition
Emmanuel Grumbach <[email protected]>
iwlwifi: mvm: split a print to avoid a WARNING in ROC
Adam Brickman <[email protected]>
ASoC: wm_adsp: Pass full name to snd_ctl_notify
Dan Carpenter <[email protected]>
mfd: sm501: Fix leaks in probe()
Thomas Gleixner <[email protected]>
net: enic: Cure the enic api locking trainwreck
Fabrice Gasnier <[email protected]>
iio: adc: stm32-adc: fix runtime autosuspend delay when slow polling
Yu Kuai <[email protected]>
iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
Andrew Jeffery <[email protected]>
pinctrl: aspeed: Use the right pinconf mask
Colin Ian King <[email protected]>
qtnfmac: fix resource leaks on unsupported iftype error return path
Toke Høiland-Jørgensen <[email protected]>
selftests: Remove fmod_ret from test_overhead
Toke Høiland-Jørgensen <[email protected]>
bpf: disallow attaching modify_return tracing functions to other BPF programs
Lijun Pan <[email protected]>
ibmvnic: set up 200GBPS speed
Sai Prakash Ranjan <[email protected]>
coresight: etm4x: Fix save and restore of TRCVMIDCCTLR1 register
Mike Leach <[email protected]>
coresight: cti: Fix bug clearing sysfs links on callback
Mike Leach <[email protected]>
coresight: cti: Fix remove sysfs link error
Tingwei Zhang <[email protected]>
coresight: etm: perf: Fix warning caused by etm_setup_aux failure
Matthew Wilcox (Oracle) <[email protected]>
iomap: Use kzalloc to allocate iomap_page
Rajkumar Manoharan <[email protected]>
nl80211: fix OBSS PD min and max offset validation
Mohammed Gamal <[email protected]>
hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions
Vadym Kochan <[email protected]>
nvmem: core: fix possibly memleak when use nvmem_cell_info_to_nvmem_cell()
Yang Yingliang <[email protected]>
tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
Dmitry Torokhov <[email protected]>
HID: hid-input: fix stylus battery reporting
Shengjiu Wang <[email protected]>
ASoC: fsl_sai: Instantiate snd_soc_dai_driver
Srinivas Kandagatla <[email protected]>
slimbus: qcom-ngd-ctrl: disable ngd in qmi server down callback
Srinivas Kandagatla <[email protected]>
slimbus: core: do not enter to clock pause mode in core
Srinivas Kandagatla <[email protected]>
slimbus: core: check get_addr before removing laddr ida
Eric Dumazet <[email protected]>
quota: clear padding in v2r1_mem2diskdqb()
Lorenzo Bianconi <[email protected]>
mt76: mt7915: fix possible memory leak in mt7915_mcu_add_beacon
Andreas Färber <[email protected]>
rtw88: Fix potential probe error handling race with wow firmware loading
Andreas Färber <[email protected]>
rtw88: Fix probe error handling race with firmware loading
Martin Blumenstingl <[email protected]>
usb: dwc2: Add missing cleanups when usb_add_gadget_udc() fails
Thinh Nguyen <[email protected]>
usb: dwc3: core: Properly default unspecified speed
Nathan Chancellor <[email protected]>
usb: dwc2: Fix parameter type in function pointer prototype
Takashi Iwai <[email protected]>
ALSA: seq: oss: Avoid mutex lock for a long-time ioctl
Souptick Joarder <[email protected]>
misc: mic: scif: Fix error handling path
Necip Fazil Yildiran <[email protected]>
ASoC: cros_ec_codec: fix kconfig dependency warning for SND_SOC_CROS_EC_CODEC
Andy Shevchenko <[email protected]>
dmaengine: dmatest: Check list for emptiness before access its last entry
Tomasz Figa <[email protected]>
phy: rockchip-dphy-rx0: Include linux/delay.h
Laurent Pinchart <[email protected]>
drm: rcar-du: Put reference to VSP device
Dan Carpenter <[email protected]>
ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()
Bo YU <[email protected]>
ath11k: Add checked value for ath11k_ahb_remove
Aswath Govindraju <[email protected]>
spi: omap2-mcspi: Improve performance waiting for CHSTAT
Dan Murphy <[email protected]>
ASoC: tas2770: Fix unbalanced calls to pm_runtime
Pierre-Louis Bossart <[email protected]>
ASoC: SOF: control: add size checks for ext_bytes control .put()
Linus Walleij <[email protected]>
net: dsa: rtl8366rb: Support all 4096 VLANs
Miquel Raynal <[email protected]>
ASoC: tlv320aic32x4: Fix bdiv clock rate derivation
Dan Murphy <[email protected]>
ASoC: tas2770: Fix error handling with update_bits
Dan Murphy <[email protected]>
ASoC: tas2770: Fix required DT properties in the code
Dan Murphy <[email protected]>
ASoC: tas2770: Add missing bias level power states
Dan Murphy <[email protected]>
ASoC: tas2770: Fix calling reset in probe
Huang Guobin <[email protected]>
net: wilc1000: clean up resource in error path of init mon interface
Linus Walleij <[email protected]>
net: dsa: rtl8366: Skip PVID setting if not requested
Linus Walleij <[email protected]>
net: dsa: rtl8366: Refactor VLAN/PVID init
Linus Walleij <[email protected]>
net: dsa: rtl8366: Check validity of passed VLANs
Mathias Nyman <[email protected]>
xhci: don't create endpoint debugfs entry before ring buffer is set.
Ilya Leoshkevich <[email protected]>
selftests/bpf: Fix endianness issue in test_sockopt_sk
Ilya Leoshkevich <[email protected]>
selftests/bpf: Fix endianness issue in sk_assign
Matthieu Baerts <[email protected]>
selftests: mptcp: interpret \n as a new line
Vadym Kochan <[email protected]>
nvmem: core: fix missing of_node_put() in of_nvmem_device_get()
Jonathan Zhou <[email protected]>
coresight: etm4x: Fix issues on trcseqevr access
Suzuki K Poulose <[email protected]>
coresight: etm4x: Handle unreachable sink in perf mode
Tingwei Zhang <[email protected]>
coresight: cti: Write regsiters directly in cti_enable_hw()
Jonathan Zhou <[email protected]>
coresight: etm4x: Fix issues within reset interface of sysfs
Mike Leach <[email protected]>
coresight: etm4x: Ensure default perf settings filter user/kernel
Tingwei Zhang <[email protected]>
coresight: cti: remove pm_runtime_get_sync() from CPU hotplug
Tingwei Zhang <[email protected]>
coresight: cti: disclaim device only when it's claimed
Mian Yousaf Kaukab <[email protected]>
coresight: fix offset by one error in counting ports
Sai Prakash Ranjan <[email protected]>
coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init
Camel Guo <[email protected]>
ASoC: tlv320adcx140: Fix digital gain range
Pierre-Louis Bossart <[email protected]>
ASoC: topology: disable size checks for bytes_ext controls if needed
KP Singh <[email protected]>
ima: Fix NULL pointer dereference in ima_file_hash
Stefan Agner <[email protected]>
drm: mxsfb: check framebuffer pitch
Pali Rohár <[email protected]>
cpufreq: armada-37xx: Add missing MODULE_DEVICE_TABLE
Darrick J. Wong <[email protected]>
xfs: force the log after remapping a synchronous-writes file
Ong Boon Leong <[email protected]>
net: stmmac: use netif_tx_start|stop_all_queues() function
Aashish Verma <[email protected]>
net: stmmac: Fix incorrect location to set real_num_rx|tx_queues
Tomas Henzl <[email protected]>
scsi: mpt3sas: Fix sync irqs
Eran Ben Elisha <[email protected]>
net/mlx5: Don't call timecounter cyc2time directly from 1PPS flow
Moshe Tal <[email protected]>
net/mlx5: Fix uninitialized variable warning
Luca Weiss <[email protected]>
drm/msm/adreno: fix probe without iommu
Thierry Reding <[email protected]>
pinctrl: devicetree: Keep deferring even on timeout
Thomas Preston <[email protected]>
pinctrl: mcp23s08: Fix mcp23x17 precious range
Thomas Preston <[email protected]>
pinctrl: mcp23s08: Fix mcp23x17_regmap initialiser
Abhishek Pandit-Subedi <[email protected]>
Bluetooth: Re-order clearing suspend tasks
Kees Cook <[email protected]>
selftests/lkdtm: Use "comm" instead of "diff" for dmesg
Matthew Wilcox (Oracle) <[email protected]>
iomap: Mark read blocks uptodate in write_begin
Matthew Wilcox (Oracle) <[email protected]>
iomap: Clear page error before beginning a write
Steven Price <[email protected]>
drm/panfrost: Ensure GPU quirks are always initialised
Stephen Boyd <[email protected]>
drm/msm: Avoid div-by-zero in dpu_crtc_atomic_check()
Dan Carpenter <[email protected]>
HID: roccat: add bounds checking in kone_sysfs_write_settings()
Stanley Chu <[email protected]>
scsi: ufs: ufs-mediatek: Fix HOST_PA_TACTIVATE quirk
Yu Kuai <[email protected]>
ASoC: fsl: imx-es8328: add missing put_device() call in imx_es8328_probe()
Dinghao Liu <[email protected]>
video: fbdev: radeon: Fix memleak in radeonfb_pci_register
Tom Rix <[email protected]>
video: fbdev: sis: fix null ptr dereference
Colin Ian King <[email protected]>
video: fbdev: vga16fb: fix setting of pixclock because a pass-by-value error
Tom Rix <[email protected]>
ath11k: fix a double free and a memory leak
Souptick Joarder <[email protected]>
drivers/virt/fsl_hypervisor: Fix error handling path
Hans de Goede <[email protected]>
pwm: lpss: Add range limit check for the base_unit register value
Hans de Goede <[email protected]>
pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare()
Artem Savkov <[email protected]>
pty: do tty_flip_buffer_push without port->lock in pty_write
Tyrel Datwyler <[email protected]>
tty: hvcs: Don't NULL tty->driver_data until hvcs_cleanup()
Tong Zhang <[email protected]>
tty: serial: earlycon dependency
Jann Horn <[email protected]>
binder: Remove bogus warning on failed same-process transaction
Eric Biggers <[email protected]>
scsi: ufs: Make ufshcd_print_trs() consider UFSHCD_QUIRK_PRDT_BYTE_GRAN
Anatoly Pugachev <[email protected]>
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
Abhishek Pandit-Subedi <[email protected]>
Bluetooth: Clear suspend tasks on unregister
Dinghao Liu <[email protected]>
drm/crc-debugfs: Fix memleak in crc_control_write
Weqaar Janjua <[email protected]>
samples/bpf: Fix to xdpsock to avoid recycling frames
Laurent Pinchart <[email protected]>
drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panel
Alexei Starovoitov <[email protected]>
mm/error_inject: Fix allow_error_inject function signatures.
Alex Dewar <[email protected]>
VMCI: check return value of get_user_pages_fast() for errors
Alex Dewar <[email protected]>
staging: emxx_udc: Fix passing of NULL to dma_alloc_coherent()
[email protected] <[email protected]>
backlight: sky81452-backlight: Fix refcount imbalance on error
Brian Norris <[email protected]>
rtw88: don't treat NULL pointer as an array
Dinghao Liu <[email protected]>
wilc1000: Fix memleak in wilc_bus_probe
Dinghao Liu <[email protected]>
wilc1000: Fix memleak in wilc_sdio_probe
Alex Gartrell <[email protected]>
libbpf: Fix unintentional success return code in bpf_object__load
Tianjia Zhang <[email protected]>
scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()
Tianjia Zhang <[email protected]>
scsi: qla2xxx: Fix wrong return value in qla_nvme_register_hba()
Tianjia Zhang <[email protected]>
scsi: qla2xxx: Fix wrong return value in qlt_chk_unresolv_exchg()
Christophe JAILLET <[email protected]>
scsi: qla2xxx: Fix the size used in a 'dma_free_coherent()' call
Christophe JAILLET <[email protected]>
scsi: qla4xxx: Fix an error handling path in 'qla4xxx_get_host_stats()'
Tom Rix <[email protected]>
drm/gma500: fix error check
Andrii Nakryiko <[email protected]>
selftests/bpf: Fix test_vmlinux test to use bpf_probe_read_user()
Colin Ian King <[email protected]>
drm/amd/display: fix potential integer overflow when shifting 32 bit variable bl_pwm
Christophe JAILLET <[email protected]>
staging: rtl8192u: Do not use GFP_KERNEL in atomic context
Christophe JAILLET <[email protected]>
mwifiex: Do not use GFP_KERNEL in atomic context
Tom Rix <[email protected]>
brcmfmac: check ndev pointer
Wang Yufen <[email protected]>
ath11k: Fix possible memleak in ath11k_qmi_init_service
Rohit kumar <[email protected]>
ASoC: qcom: lpass-cpu: fix concurrency issue
Rohit kumar <[email protected]>
ASoC: qcom: lpass-platform: fix memory leak
Bryan O'Donoghue <[email protected]>
wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680
Christophe JAILLET <[email protected]>
ath10k: Fix the size used in a 'dma_free_coherent()' call in an error handling path
Dan Carpenter <[email protected]>
ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()
Dan Carpenter <[email protected]>
ath6kl: prevent potential array overflow in ath6kl_add_new_sta()
Laurent Pinchart <[email protected]>
drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel
Qinglang Miao <[email protected]>
drm/vkms: add missing platform_device_unregister() in vkms_init()
Qinglang Miao <[email protected]>
drm/vgem: add missing platform_device_unregister() in vgem_init()
Tianjia Zhang <[email protected]>
drm/amd/display: Fix wrong return value in dm_update_plane_state()
Samuel Holland <[email protected]>
Bluetooth: hci_uart: Cancel init work before unregistering
Melissa Wen <[email protected]>
drm/vkms: fix xrgb on compute crc
Venkateswara Naralasetty <[email protected]>
ath10k: provide survey info as accumulated data
Yang Yang <[email protected]>
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
Qu Wenruo <[email protected]>
btrfs: add owner and fs_info to alloc_state io_tree
Serge Semin <[email protected]>
hwmon: (bt1-pvt) Wait for the completion with timeout
Serge Semin <[email protected]>
hwmon: (bt1-pvt) Cache current update timeout
Serge Semin <[email protected]>
hwmon: (bt1-pvt) Test sensor power supply on probe
Łukasz Stelmach <[email protected]>
spi: spi-s3c64xx: Check return values
Łukasz Stelmach <[email protected]>
spi: spi-s3c64xx: swap s3c64xx_spi_set_cs() and s3c64xx_enable_datapath()
Necip Fazil Yildiran <[email protected]>
pinctrl: bcm: fix kconfig dependency warning when !GPIOLIB
Michał Mirosław <[email protected]>
regulator: resolve supply after creating regulator
Qiushi Wu <[email protected]>
media: ti-vpe: Fix a missing check and reference count leak
Qiushi Wu <[email protected]>
media: stm32-dcmi: Fix a reference count leak
Qiushi Wu <[email protected]>
media: s5p-mfc: Fix a reference count leak
Qiushi Wu <[email protected]>
media: camss: Fix a reference count leak.
Qiushi Wu <[email protected]>
media: platform: fcp: Fix a reference count leak.
Qiushi Wu <[email protected]>
media: rockchip/rga: Fix a reference count leak.
Qiushi Wu <[email protected]>
media: rcar-vin: Fix a reference count leak.
Tom Rix <[email protected]>
media: tc358743: cleanup tc358743_cec_isr
Tom Rix <[email protected]>
media: tc358743: initialize variable
Dinghao Liu <[email protected]>
media: mx2_emmaprp: Fix memleak in emmaprp_probe
Corentin Labbe <[email protected]>
crypto: sun8i-ce - handle endianness of t_common_ctl
Nicolas Toromanoff <[email protected]>
crypto: stm32/crc32 - Avoid lock if hardware is already used
Xiaoliang Pang <[email protected]>
cypto: mediatek - fix leaks in mtk_desc_ring_alloc
Dan Carpenter <[email protected]>
hwmon: (w83627ehf) Fix a resource leak in probe
Guenter Roeck <[email protected]>
hwmon: (pmbus/max34440) Fix status register reads for MAX344{51,60,61}
Tero Kristo <[email protected]>
crypto: omap-sham - fix digcnt register handling with export/import
Jay Fang <[email protected]>
spi: dw-pci: free previously allocated IRQs if desc->setup() fails
Eddie James <[email protected]>
spi: fsi: Implement restricted size for certain controllers
Brad Bishop <[email protected]>
spi: fsi: Fix use of the bneq+ sequencer instruction
Brad Bishop <[email protected]>
spi: fsi: Handle 9 to 15 byte transfers lengths
Laurent Pinchart <[email protected]>
media: rcar-csi2: Allocate v4l2_async_subdev dynamically
Laurent Pinchart <[email protected]>
media: rcar_drif: Allocate v4l2_async_subdev dynamically
Laurent Pinchart <[email protected]>
media: rcar_drif: Fix fwnode reference leak when parsing DT
Lad Prabhakar <[email protected]>
media: i2c: ov5640: Enable data pins on poweron for DVP mode
Lad Prabhakar <[email protected]>
media: i2c: ov5640: Separate out mipi configuration from s_power
Lad Prabhakar <[email protected]>
media: i2c: ov5640: Remain in power down for DVP mode unless streaming
Dinghao Liu <[email protected]>
media: omap3isp: Fix memleak in isp_probe
Christophe JAILLET <[email protected]>
media: staging/intel-ipu3: css: Correctly reset some memory
Laurent Pinchart <[email protected]>
media: uvcvideo: Silence shift-out-of-bounds warning
Laurent Pinchart <[email protected]>
media: uvcvideo: Set media controller entity functions
Eric Biggers <[email protected]>
fscrypt: restrict IV_INO_LBLK_32 to ino_bits <= 32
Tom Rix <[email protected]>
media: m5mols: Check function pointer in m5mols_sensor_power
Paul Kocialkowski <[email protected]>
media: ov5640: Correct Bit Div register in clock tree diagram
Ezequiel Garcia <[email protected]>
media: hantro: postproc: Fix motion vector space allocation
Ezequiel Garcia <[email protected]>
media: hantro: h264: Get the correct fallback reference buffer
Sylwester Nawrocki <[email protected]>
media: Revert "media: exynos4-is: Add missed check for pinctrl_lookup_state()"
[email protected] <[email protected]>
crypto: ccree - fix runtime PM imbalance on error
Tom Rix <[email protected]>
media: tuner-simple: fix regression in simple_set_radio_freq
Peilin Ye <[email protected]>
media: vivid: Fix global-out-of-bounds read in precalculate_color()
Madhuparna Bhowmik <[email protected]>
crypto: picoxcell - Fix potential race condition bug
Christophe JAILLET <[email protected]>
crypto: ixp4xx - Fix the size used in a 'dma_free_coherent()' call
Tianjia Zhang <[email protected]>
crypto: mediatek - Fix wrong return value in mtk_desc_ring_alloc()
Herbert Xu <[email protected]>
crypto: algif_skcipher - EBUSY on aio should be an error
Jiri Olsa <[email protected]>
perf/core: Fix race in the perf_mmap_close() function
Sasha Levin <[email protected]>
perf/x86: Fix n_pair for cancelled txn
Maulik Shah <[email protected]>
pinctrl: qcom: Use return value from irq_set_wake() call
Maulik Shah <[email protected]>
pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags
Colin Ian King <[email protected]>
x86/events/amd/iommu: Fix sizeof mismatch
Libing Zhou <[email protected]>
x86/nmi: Fix nmi_handle() duration miscalculation
Kan Liang <[email protected]>
perf/x86/intel/uncore: Fix the scale of the IMC free-running events
Kan Liang <[email protected]>
perf/x86/intel/uncore: Reduce the number of CBOX counters
Kan Liang <[email protected]>
perf/x86/intel/uncore: Update Ice Lake uncore units
Alexandru Elisei <[email protected]>
arm64: perf: Add missing ISB in armv8pmu_enable_counter()
Barry Song <[email protected]>
sched/fair: Use dst group while checking imbalance for NUMA balancer
Xunlei Pang <[email protected]>
sched/fair: Fix wrong cpu selecting from isolated domain
Mark Salter <[email protected]>
drivers/perf: thunderx2_pmu: Fix memory resource error handling
Mark Salter <[email protected]>
drivers/perf: xgene_pmu: Fix uninitialized resource struct
Amit Daniel Kachhap <[email protected]>
arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
Arvind Sankar <[email protected]>
x86/fpu: Allow multiple bits in clearcpuid= parameter
Kan Liang <[email protected]>
perf/x86/intel/ds: Fix x86_pmu_stop warning for large PEBS
Krzysztof Kozlowski <[email protected]>
EDAC/ti: Fix handling of platform_get_irq() error
Krzysztof Kozlowski <[email protected]>
EDAC/aspeed: Fix handling of platform_get_irq() error
Dinghao Liu <[email protected]>
EDAC/i5100: Fix error handling order in i5100_init_one()
Randy Dunlap <[email protected]>
microblaze: fix kbuild redundant file warning
Lukasz Luba <[email protected]>
sched/fair: Fix wrong negative conversion in find_energy_efficient_cpu()
Luca Stefani <[email protected]>
RAS/CEC: Fix cec_init() prototype
Andrei Botila <[email protected]>
crypto: caam/qi - add support for more XTS key lengths
Andrei Botila <[email protected]>
crypto: caam/qi - add fallback for XTS with more than 8B IV
Herbert Xu <[email protected]>
crypto: algif_aead - Do not set MAY_BACKLOG on the async path
Roberto Sassu <[email protected]>
ima: Don't ignore errors from crypto_shash_update()
Suravee Suthikulpanit <[email protected]>
KVM: SVM: Initialize prev_ga_tag before use
Lai Jiangshan <[email protected]>
KVM: x86: Intercept LA57 to inject #GP fault when it's reserved
Sean Christopherson <[email protected]>
KVM: x86/mmu: Commit zap of remaining invalid pages when recovering lpages
Sean Christopherson <[email protected]>
KVM: nVMX: Reload vmcs01 if getting vmcs12's pages fails
Sean Christopherson <[email protected]>
KVM: nVMX: Reset the segment cache when stuffing guest segs
Sean Christopherson <[email protected]>
KVM: nVMX: Morph notification vector IRQ on nested VM-Enter to pending PI
Marc Zyngier <[email protected]>
arm64: Make use of ARCH_WORKAROUND_1 even when KVM is not enabled
Steve French <[email protected]>
smb3: fix stat when special device file and mounted with modefromsid
Steve French <[email protected]>
smb3: do not try to cache root directory if dir leases not supported
Steve French <[email protected]>
SMB3.1.1: Fix ids returned in POSIX query dir
Rohith Surabattula <[email protected]>
SMB3: Resolve data corruption of TCP server info fields
Shyam Prasad N <[email protected]>
cifs: Return the error from crypt_message when enc/dec key not found.
Dan Carpenter <[email protected]>
cifs: remove bogus debug code
Jian-Hong Pan <[email protected]>
ALSA: hda/realtek: Enable audio jacks of ASUS D700SA with ALC887
Qiu Wenbo <[email protected]>
ALSA: hda/realtek - Add mute Led support for HP Elitebook 845 G7
Hui Wang <[email protected]>
ALSA: hda/realtek - set mic to auto detect on a HP AIO machine
Jeremy Szu <[email protected]>
ALSA: hda/realtek - The front Mic on a HP machine doesn't work
Lukasz Halman <[email protected]>
ALSA: usb-audio: Line6 Pod Go interface requires static clock rate quirk
Hui Wang <[email protected]>
ALSA: hda - Fix the return value if cb func is already registered
Hui Wang <[email protected]>
ALSA: hda - Don't register a cb func if it is registered already
Guillaume Nault <[email protected]>
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
Bartosz Golaszewski <[email protected]>
net: ethernet: mtk-star-emac: select REGMAP_MMIO
Neal Cardwell <[email protected]>
tcp: fix to update snd_wl1 in bulk receiver fast path
Po-Hsu Lin <[email protected]>
selftests: rtnetlink: load fou module for kci_test_encap_fou() test
Ido Schimmel <[email protected]>
selftests: forwarding: Add missing 'rp_filter' configuration
Heiner Kallweit <[email protected]>
r8169: fix operation under forced interrupt threading
Defang Bo <[email protected]>
nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()
Ido Schimmel <[email protected]>
nexthop: Fix performance regression in nexthop deletion
Davide Caratti <[email protected]>
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
Roi Dayan <[email protected]>
net/sched: act_ct: Fix adding udp port mangle operation
Ke Li <[email protected]>
net: Properly typecast int values to set sk_max_pacing_rate
Xie He <[email protected]>
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
Xie He <[email protected]>
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
Dylan Hung <[email protected]>
net: ftgmac100: Fix Aspeed ast2600 TX hang issue
Geliang Tang <[email protected]>
mptcp: initialize mptcp_options_received's ahmac
Eric Dumazet <[email protected]>
icmp: randomize the global rate limiter
Lijun Pan <[email protected]>
ibmvnic: save changed mac address to adapter->mac_addr
Vinay Kumar Yadav <[email protected]>
chelsio/chtls: fix writing freed memory
Vinay Kumar Yadav <[email protected]>
chelsio/chtls: correct function return and return type
Vinay Kumar Yadav <[email protected]>
chelsio/chtls: Fix panic when listen on multiadapter
Vinay Kumar Yadav <[email protected]>
chelsio/chtls: fix panic when server is on ipv6
Vinay Kumar Yadav <[email protected]>
chelsio/chtls: correct netdevice for vlan interface
Vinay Kumar Yadav <[email protected]>
chelsio/chtls: fix socket lock
Hoang Huu Le <[email protected]>
tipc: fix incorrect setting window for bcast link
Hoang Huu Le <[email protected]>
tipc: re-configure queue limit for broadcast link
Kai Vehmanen <[email protected]>
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
Kai Vehmanen <[email protected]>
ALSA: hda: fix jack detection with Realtek codecs when in D3
Dan Carpenter <[email protected]>
ALSA: bebob: potential info leak in hwdep_read()
Todd Kjos <[email protected]>
binder: fix UAF when releasing todo list
Heiner Kallweit <[email protected]>
r8169: fix data corruption issue on RTL8402
Cong Wang <[email protected]>
net_sched: remove a redundant goto chain check
Maciej Żenczykowski <[email protected]>
net/ipv4: always honour route mtu during forwarding
Marc Kleine-Budde <[email protected]>
net: j1939: j1939_session_fresh_new(): fix missing initialization of skbcnt
Cong Wang <[email protected]>
can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt
Lucas Stach <[email protected]>
can: m_can_platform: don't call m_can_class_suspend in runtime suspend
Christian Eggers <[email protected]>
socket: don't clear SOCK_TSTAMP_NEW when SO_TIMESTAMPNS is disabled
Christian Eggers <[email protected]>
socket: fix option SO_TIMESTAMPING_NEW
Cong Wang <[email protected]>
tipc: fix the skb_unshare() in tipc_buf_append()
Wilken Gottwalt <[email protected]>
net: usb: qmi_wwan: add Cellient MPL200 card
Rohit Maheshwari <[email protected]>
net/tls: sendfile fails with ktls offload
Karsten Graul <[email protected]>
net/smc: fix valid DMBE buffer sizes
Karsten Graul <[email protected]>
net/smc: fix use-after-free of delayed events
Leon Romanovsky <[email protected]>
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
Davide Caratti <[email protected]>
net: mptcp: make DACK4/DACK8 usage consistent among all subflows
Alex Elder <[email protected]>
net: ipa: skip suspend/resume activities if not set up
Yonghong Song <[email protected]>
net: fix pos incrementment in ipv6_route_seq_next
Marek Vasut <[email protected]>
net: fec: Fix PHY init after phy_reset_after_clk_enable()
Marek Vasut <[email protected]>
net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()
Christian Eggers <[email protected]>
net: dsa: microchip: fix race condition
Jonathan Lemon <[email protected]>
mlx4: handle non-napi callers to napi_poll
David Ahern <[email protected]>
ipv4: Restore flowi4_oif update before call to xfrm_lookup_route
David Wilder <[email protected]>
ibmveth: Identify ingress large send packets.
David Wilder <[email protected]>
ibmveth: Switch order of ibmveth_helper calls.
Herat Ramani <[email protected]>
xgb4: handle 4-tuple PEDIT to NAT mode translation
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 2 +-
.../crypto/allwinner,sun4i-a10-crypto.yaml | 7 +-
.../devicetree/bindings/net/socionext-netsec.txt | 4 +-
Documentation/networking/ip-sysctl.rst | 4 +-
Makefile | 4 +-
arch/arc/plat-hsdk/Kconfig | 1 +
arch/arm/boot/dts/imx6sl.dtsi | 2 +
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 15 +-
arch/arm/boot/dts/meson8.dtsi | 2 -
arch/arm/boot/dts/owl-s500.dtsi | 6 +-
arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 2 -
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 35 +--
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 38 ++-
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 6 +-
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 10 +-
arch/arm/mach-at91/pm.c | 1 +
arch/arm/mach-omap2/cpuidle44xx.c | 4 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-h1940.c | 4 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 4 +-
arch/arm/mach-s3c24xx/mach-n30.c | 4 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 4 +-
arch/arm/mm/cache-l2x0.c | 16 +-
arch/arm64/boot/dts/actions/s700.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 6 +-
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 +-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 5 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 10 +-
arch/arm64/boot/dts/qcom/pm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7180.dtsi | 6 +-
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 5 +-
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 5 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 +-
arch/arm64/include/asm/insn.h | 4 +
arch/arm64/include/asm/memory.h | 5 +-
arch/arm64/include/asm/pgtable.h | 4 +-
arch/arm64/kernel/cpu_errata.c | 7 +-
arch/arm64/kernel/insn.c | 5 +-
arch/arm64/kernel/perf_event.c | 5 +
arch/arm64/kernel/probes/decode-insn.c | 3 +-
arch/arm64/mm/init.c | 30 +--
arch/m68k/coldfire/device.c | 6 +-
arch/microblaze/include/asm/Kbuild | 1 -
arch/powerpc/include/asm/book3s/64/hash-4k.h | 13 +-
arch/powerpc/include/asm/drmem.h | 39 ++-
arch/powerpc/include/asm/hw_breakpoint.h | 1 +
arch/powerpc/include/asm/reg.h | 2 +-
arch/powerpc/include/asm/svm.h | 4 +
arch/powerpc/include/asm/tlb.h | 13 -
arch/powerpc/kernel/hw_breakpoint.c | 14 +-
arch/powerpc/kernel/irq.c | 9 +-
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 1 +
arch/powerpc/kernel/tau_6xx.c | 147 ++++------
arch/powerpc/mm/book3s64/radix_tlb.c | 23 +-
arch/powerpc/mm/drmem.c | 6 +-
arch/powerpc/mm/kasan/kasan_init_32.c | 12 +-
arch/powerpc/mm/mem.c | 6 +-
arch/powerpc/perf/hv-gpci-requests.h | 6 +-
arch/powerpc/perf/isa207-common.c | 10 +
arch/powerpc/platforms/Kconfig | 14 +-
arch/powerpc/platforms/powernv/opal-dump.c | 41 ++-
arch/powerpc/platforms/pseries/hotplug-memory.c | 24 +-
arch/powerpc/platforms/pseries/papr_scm.c | 3 +
arch/powerpc/platforms/pseries/ras.c | 118 ++++----
arch/powerpc/platforms/pseries/rng.c | 1 +
arch/powerpc/platforms/pseries/svm.c | 26 ++
arch/powerpc/sysdev/xics/icp-hv.c | 1 +
arch/powerpc/xmon/xmon.c | 1 +
arch/s390/pci/pci_bus.c | 5 +-
arch/um/drivers/vector_kern.c | 4 +-
arch/um/kernel/time.c | 14 +-
arch/x86/boot/compressed/pgtable_64.c | 9 -
arch/x86/events/amd/iommu.c | 2 +-
arch/x86/events/core.c | 6 +-
arch/x86/events/intel/ds.c | 32 ++-
arch/x86/events/intel/uncore_snb.c | 31 ++-
arch/x86/events/intel/uncore_snbep.c | 12 +-
arch/x86/events/perf_event.h | 1 +
arch/x86/include/asm/special_insns.h | 28 +-
arch/x86/kernel/cpu/common.c | 4 +-
arch/x86/kernel/cpu/mce/core.c | 99 +++++--
arch/x86/kernel/cpu/mce/internal.h | 10 +
arch/x86/kernel/cpu/mce/severity.c | 28 +-
arch/x86/kernel/dumpstack.c | 3 +-
arch/x86/kernel/fpu/init.c | 30 ++-
arch/x86/kernel/nmi.c | 5 +-
arch/x86/kvm/emulate.c | 2 +-
arch/x86/kvm/ioapic.c | 5 +-
arch/x86/kvm/kvm_cache_regs.h | 2 +-
arch/x86/kvm/lapic.c | 7 +
arch/x86/kvm/lapic.h | 1 +
arch/x86/kvm/mmu/mmu.c | 1 +
arch/x86/kvm/svm/avic.c | 1 +
arch/x86/kvm/vmx/nested.c | 14 +-
block/blk-core.c | 9 +-
block/blk-mq-sysfs.c | 2 -
block/blk-sysfs.c | 9 +-
crypto/algif_aead.c | 7 +-
crypto/algif_skcipher.c | 2 +-
drivers/android/binder.c | 37 +--
drivers/bluetooth/btusb.c | 1 +
drivers/bluetooth/hci_ldisc.c | 1 +
drivers/bluetooth/hci_serdev.c | 2 +
drivers/bus/mhi/core/Makefile | 2 +-
drivers/char/ipmi/ipmi_si_intf.c | 2 +-
drivers/clk/at91/clk-main.c | 11 +-
drivers/clk/bcm/clk-bcm2835.c | 4 +-
drivers/clk/imx/clk-imx8mq.c | 4 +-
drivers/clk/keystone/sci-clk.c | 2 +-
drivers/clk/mediatek/clk-mt6779.c | 2 +
drivers/clk/meson/axg-audio.c | 135 +++++++++-
drivers/clk/meson/g12a.c | 11 +
drivers/clk/qcom/gcc-sdm660.c | 2 +-
drivers/clk/rockchip/clk-half-divider.c | 2 +-
drivers/clocksource/hyperv_timer.c | 4 +-
drivers/cpufreq/armada-37xx-cpufreq.c | 6 +
drivers/cpufreq/powernv-cpufreq.c | 9 +-
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c | 5 +-
drivers/crypto/caam/Kconfig | 1 +
drivers/crypto/caam/caamalg_qi.c | 81 +++++-
drivers/crypto/ccp/ccp-ops.c | 2 +-
drivers/crypto/ccree/cc_pm.c | 6 +-
drivers/crypto/chelsio/chtls/chtls_cm.c | 19 +-
drivers/crypto/chelsio/chtls/chtls_io.c | 5 +-
drivers/crypto/hisilicon/sec2/sec_crypto.c | 16 +-
drivers/crypto/ixp4xx_crypto.c | 2 +-
drivers/crypto/mediatek/mtk-platform.c | 8 +-
drivers/crypto/omap-sham.c | 3 +
drivers/crypto/picoxcell_crypto.c | 9 +-
drivers/crypto/stm32/Kconfig | 1 +
drivers/crypto/stm32/stm32-crc32.c | 15 +-
drivers/dma/dmatest.c | 5 +-
drivers/dma/dw/core.c | 4 +
drivers/dma/dw/dw.c | 2 +-
drivers/dma/dw/of.c | 7 +-
drivers/dma/ioat/dma.c | 2 +-
drivers/edac/aspeed_edac.c | 4 +-
drivers/edac/i5100_edac.c | 11 +-
drivers/edac/ti_edac.c | 3 +-
drivers/firmware/arm_scmi/mailbox.c | 2 +-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +-
drivers/gpu/drm/amd/display/dc/core/dc.c | 2 +-
.../gpu/drm/amd/display/dc/dce/dce_panel_cntl.c | 2 +-
.../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 3 +
.../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 3 +
drivers/gpu/drm/drm_debugfs_crc.c | 4 +-
drivers/gpu/drm/drm_gem_vram_helper.c | 28 +-
drivers/gpu/drm/gma500/cdv_intel_dp.c | 2 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +-
drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c | 2 +-
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 10 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 8 +-
drivers/gpu/drm/mxsfb/mxsfb_drv.c | 21 +-
drivers/gpu/drm/panel/panel-simple.c | 4 +-
drivers/gpu/drm/panfrost/panfrost_device.h | 3 +
drivers/gpu/drm/panfrost/panfrost_drv.c | 11 +
drivers/gpu/drm/panfrost/panfrost_gpu.c | 22 +-
drivers/gpu/drm/panfrost/panfrost_gpu.h | 2 +
drivers/gpu/drm/panfrost/panfrost_regs.h | 4 +
drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 12 +
drivers/gpu/drm/vgem/vgem_drv.c | 2 +-
drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +
drivers/gpu/drm/virtio/virtgpu_vq.c | 10 +-
drivers/gpu/drm/vkms/vkms_composer.c | 2 +-
drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
drivers/hid/hid-ids.h | 2 +
drivers/hid/hid-input.c | 4 +-
drivers/hid/hid-ite.c | 4 +
drivers/hid/hid-multitouch.c | 6 +
drivers/hid/hid-roccat-kone.c | 23 +-
drivers/hwmon/bt1-pvt.c | 138 +++++++---
drivers/hwmon/bt1-pvt.h | 3 +
drivers/hwmon/pmbus/max34440.c | 3 -
drivers/hwmon/w83627ehf.c | 6 +-
drivers/hwtracing/coresight/coresight-cti.c | 41 +--
drivers/hwtracing/coresight/coresight-etm-perf.c | 14 +-
.../hwtracing/coresight/coresight-etm4x-sysfs.c | 2 +-
drivers/hwtracing/coresight/coresight-etm4x.c | 105 ++++----
drivers/hwtracing/coresight/coresight-etm4x.h | 3 +
drivers/hwtracing/coresight/coresight-platform.c | 10 +-
drivers/hwtracing/coresight/coresight.c | 2 +-
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/i2c-core-acpi.c | 11 +-
drivers/i3c/master.c | 19 +-
drivers/i3c/master/i3c-master-cdns.c | 4 +-
drivers/iio/adc/stm32-adc-core.c | 9 +-
drivers/infiniband/core/cma.c | 300 +++++++++------------
drivers/infiniband/core/cq.c | 30 +--
drivers/infiniband/core/ucma.c | 6 +-
drivers/infiniband/core/umem.c | 15 +-
drivers/infiniband/core/verbs.c | 9 +-
drivers/infiniband/hw/bnxt_re/ib_verbs.c | 3 +-
drivers/infiniband/hw/bnxt_re/ib_verbs.h | 2 +-
drivers/infiniband/hw/cxgb4/cq.c | 3 +-
drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 2 +-
drivers/infiniband/hw/efa/efa.h | 2 +-
drivers/infiniband/hw/efa/efa_verbs.c | 3 +-
drivers/infiniband/hw/hns/hns_roce_cq.c | 3 +-
drivers/infiniband/hw/hns/hns_roce_device.h | 4 +-
drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 4 +-
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 41 ++-
drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 2 +
drivers/infiniband/hw/hns/hns_roce_qp.c | 6 +-
drivers/infiniband/hw/i40iw/i40iw.h | 9 +-
drivers/infiniband/hw/i40iw/i40iw_cm.c | 10 +-
drivers/infiniband/hw/i40iw/i40iw_hw.c | 4 +-
drivers/infiniband/hw/i40iw/i40iw_utils.c | 59 +---
drivers/infiniband/hw/i40iw/i40iw_verbs.c | 34 ++-
drivers/infiniband/hw/i40iw/i40iw_verbs.h | 3 +-
drivers/infiniband/hw/mlx4/cm.c | 3 +
drivers/infiniband/hw/mlx4/cq.c | 3 +-
drivers/infiniband/hw/mlx4/mad.c | 34 ++-
drivers/infiniband/hw/mlx4/mlx4_ib.h | 4 +-
drivers/infiniband/hw/mlx5/cq.c | 14 +-
drivers/infiniband/hw/mlx5/main.c | 4 +-
drivers/infiniband/hw/mlx5/mlx5_ib.h | 2 +-
drivers/infiniband/hw/mlx5/mr.c | 64 ++---
drivers/infiniband/hw/mthca/mthca_provider.c | 3 +-
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 3 +-
drivers/infiniband/hw/ocrdma/ocrdma_verbs.h | 2 +-
drivers/infiniband/hw/qedr/main.c | 2 +-
drivers/infiniband/hw/qedr/qedr_iw_cm.c | 6 +-
drivers/infiniband/hw/qedr/verbs.c | 63 +++--
drivers/infiniband/hw/qedr/verbs.h | 2 +-
drivers/infiniband/hw/usnic/usnic_ib_verbs.c | 4 +-
drivers/infiniband/hw/usnic/usnic_ib_verbs.h | 2 +-
drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c | 3 +-
drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h | 2 +-
drivers/infiniband/sw/rdmavt/cq.c | 3 +-
drivers/infiniband/sw/rdmavt/cq.h | 2 +-
drivers/infiniband/sw/rdmavt/vt.c | 4 +-
drivers/infiniband/sw/rxe/rxe_recv.c | 20 +-
drivers/infiniband/sw/rxe/rxe_verbs.c | 3 +-
drivers/infiniband/sw/siw/siw_verbs.c | 3 +-
drivers/infiniband/sw/siw/siw_verbs.h | 2 +-
drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +
drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 11 +
drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 2 +
drivers/infiniband/ulp/rtrs/rtrs-srv.c | 76 +++++-
drivers/infiniband/ulp/rtrs/rtrs-srv.h | 7 +
drivers/input/keyboard/ep93xx_keypad.c | 4 +-
drivers/input/keyboard/omap4-keypad.c | 6 +-
drivers/input/keyboard/twl4030_keypad.c | 8 +-
drivers/input/serio/sun4i-ps2.c | 9 +-
drivers/input/touchscreen/elants_i2c.c | 2 +-
drivers/input/touchscreen/imx6ul_tsc.c | 27 +-
drivers/input/touchscreen/stmfts.c | 2 +-
drivers/iommu/qcom_iommu.c | 8 +-
drivers/lightnvm/core.c | 5 +-
drivers/mailbox/mailbox.c | 12 +-
drivers/mailbox/mtk-cmdq-mailbox.c | 8 +-
drivers/md/md-bitmap.c | 3 +-
drivers/md/md-cluster.c | 1 +
drivers/media/firewire/firedtv-fw.c | 6 +-
drivers/media/i2c/m5mols/m5mols_core.c | 3 +-
drivers/media/i2c/ov5640.c | 196 ++++++++------
drivers/media/i2c/tc358743.c | 14 +-
drivers/media/pci/bt8xx/bttv-driver.c | 13 +-
drivers/media/pci/saa7134/saa7134-tvaudio.c | 3 +-
drivers/media/platform/exynos4-is/fimc-isp.c | 4 +-
drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
drivers/media/platform/exynos4-is/media-dev.c | 8 +-
drivers/media/platform/exynos4-is/mipi-csis.c | 4 +-
drivers/media/platform/mx2_emmaprp.c | 7 +-
drivers/media/platform/omap3isp/isp.c | 6 +-
drivers/media/platform/qcom/camss/camss-csiphy.c | 4 +-
drivers/media/platform/qcom/venus/core.c | 20 +-
drivers/media/platform/qcom/venus/vdec.c | 10 +-
drivers/media/platform/rcar-fcp.c | 4 +-
drivers/media/platform/rcar-vin/rcar-csi2.c | 24 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 4 +-
drivers/media/platform/rcar_drif.c | 30 +--
drivers/media/platform/rockchip/rga/rga-buf.c | 1 +
drivers/media/platform/s3c-camif/camif-core.c | 5 +-
drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 4 +-
drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 3 +-
drivers/media/platform/sti/delta/delta-v4l2.c | 4 +-
drivers/media/platform/sti/hva/hva-hw.c | 4 +-
drivers/media/platform/stm32/stm32-dcmi.c | 4 +-
drivers/media/platform/ti-vpe/vpe.c | 2 +
drivers/media/platform/vsp1/vsp1_drv.c | 11 +-
drivers/media/rc/ati_remote.c | 4 +
drivers/media/test-drivers/vivid/vivid-meta-out.c | 9 +-
drivers/media/tuners/tuner-simple.c | 5 +-
drivers/media/usb/uvc/uvc_ctrl.c | 6 +-
drivers/media/usb/uvc/uvc_entity.c | 35 +++
drivers/media/usb/uvc/uvc_v4l2.c | 30 +++
drivers/memory/fsl-corenet-cf.c | 6 +-
drivers/memory/omap-gpmc.c | 8 +-
drivers/mfd/sm501.c | 8 +-
drivers/misc/cardreader/rtsx_pcr.c | 4 +-
drivers/misc/eeprom/at25.c | 2 +-
drivers/misc/habanalabs/gaudi/gaudi.c | 8 +-
drivers/misc/habanalabs/goya/goya.c | 8 +-
drivers/misc/mic/scif/scif_rma.c | 4 +-
drivers/misc/mic/vop/vop_main.c | 2 +-
drivers/misc/mic/vop/vop_vringh.c | 24 +-
drivers/misc/ocxl/Kconfig | 3 +-
drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 +-
drivers/mmc/core/sdio_cis.c | 3 +
drivers/mtd/hyperbus/hbmc-am654.c | 4 +-
drivers/mtd/lpddr/lpddr2_nvm.c | 35 +--
drivers/mtd/mtdoops.c | 11 +-
drivers/mtd/nand/raw/ams-delta.c | 2 +
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 6 +-
drivers/mtd/nand/spi/gigadevice.c | 14 +-
drivers/net/can/flexcan.c | 34 ++-
drivers/net/can/m_can/m_can_platform.c | 2 -
drivers/net/dsa/microchip/ksz_common.c | 16 +-
drivers/net/dsa/realtek-smi-core.h | 4 +-
drivers/net/dsa/rtl8366.c | 280 ++++++++++---------
drivers/net/dsa/rtl8366rb.c | 2 +-
.../net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c | 175 +++++++++++-
.../net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.h | 15 ++
drivers/net/ethernet/cisco/enic/enic.h | 1 +
drivers/net/ethernet/cisco/enic/enic_api.c | 6 +
drivers/net/ethernet/cisco/enic/enic_main.c | 27 +-
drivers/net/ethernet/faraday/ftgmac100.c | 5 +
drivers/net/ethernet/faraday/ftgmac100.h | 8 +
drivers/net/ethernet/freescale/fec_main.c | 35 ++-
drivers/net/ethernet/ibm/ibmveth.c | 19 +-
drivers/net/ethernet/ibm/ibmvnic.c | 10 +-
drivers/net/ethernet/ibm/ibmvnic.h | 2 +-
drivers/net/ethernet/korina.c | 3 +-
drivers/net/ethernet/mediatek/Kconfig | 1 +
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 3 +
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/en/health.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/lib/clock.c | 5 +-
drivers/net/ethernet/realtek/r8169_main.c | 12 +-
drivers/net/ethernet/socionext/netsec.c | 24 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 41 +--
drivers/net/ipa/ipa_endpoint.c | 6 +
drivers/net/usb/qmi_wwan.c | 1 +
drivers/net/wan/hdlc.c | 10 +-
drivers/net/wan/hdlc_raw_eth.c | 1 +
drivers/net/wireless/ath/ath10k/ce.c | 2 +-
drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
drivers/net/wireless/ath/ath11k/ahb.c | 10 +-
drivers/net/wireless/ath/ath11k/mac.c | 4 +-
drivers/net/wireless/ath/ath11k/qmi.c | 1 +
drivers/net/wireless/ath/ath6kl/main.c | 3 +
drivers/net/wireless/ath/ath6kl/wmi.c | 5 +
drivers/net/wireless/ath/ath9k/hif_usb.c | 19 ++
drivers/net/wireless/ath/ath9k/htc_hst.c | 2 +
drivers/net/wireless/ath/wcn36xx/main.c | 2 +-
.../wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +-
.../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 2 +
.../broadcom/brcm80211/brcmsmac/phy/phy_lcn.c | 4 +-
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 8 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 9 +-
drivers/net/wireless/marvell/mwifiex/scan.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +
drivers/net/wireless/marvell/mwifiex/usb.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 18 +-
drivers/net/wireless/quantenna/qtnfmac/commands.c | 2 +
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 10 +-
drivers/net/wireless/realtek/rtw88/main.c | 5 +
drivers/net/wireless/realtek/rtw88/pci.c | 2 +
drivers/net/wireless/realtek/rtw88/pci.h | 4 +-
drivers/net/wireless/realtek/rtw88/phy.c | 5 +-
drivers/ntb/hw/amd/ntb_hw_amd.c | 1 +
drivers/ntb/hw/intel/ntb_hw_gen1.c | 2 +-
drivers/nvme/target/core.c | 3 +-
drivers/nvmem/core.c | 38 ++-
drivers/opp/core.c | 6 +
drivers/pci/controller/dwc/pcie-designware-ep.c | 3 +-
drivers/pci/controller/pci-aardvark.c | 13 +-
drivers/pci/controller/pci-hyperv.c | 50 +++-
drivers/pci/controller/pcie-iproc-msi.c | 13 +-
drivers/pci/iov.c | 1 +
drivers/perf/thunderx2_pmu.c | 7 +-
drivers/perf/xgene_pmu.c | 32 +--
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 2 +-
drivers/pinctrl/bcm/Kconfig | 1 +
drivers/pinctrl/devicetree.c | 5 +-
drivers/pinctrl/pinctrl-mcp23s08.c | 24 +-
drivers/pinctrl/qcom/pinctrl-msm.c | 10 +-
drivers/platform/chrome/cros_ec_lightbar.c | 2 +
drivers/platform/x86/mlx-platform.c | 15 +-
drivers/pwm/pwm-img.c | 3 +-
drivers/pwm/pwm-lpss.c | 7 +-
drivers/pwm/pwm-rockchip.c | 5 +-
drivers/rapidio/devices/rio_mport_cdev.c | 18 +-
drivers/ras/cec.c | 9 +-
drivers/regulator/core.c | 21 +-
drivers/remoteproc/mtk_scp_ipi.c | 4 +-
drivers/rpmsg/mtk_rpmsg.c | 9 +-
drivers/rpmsg/qcom_smd.c | 32 ++-
drivers/rtc/rtc-ds1307.c | 4 +
drivers/s390/net/qeth_core.h | 6 +
drivers/s390/net/qeth_l2_main.c | 59 +++-
drivers/s390/net/qeth_l2_sys.c | 1 +
drivers/scsi/be2iscsi/be_main.c | 4 +-
drivers/scsi/bfa/bfad.c | 1 +
drivers/scsi/csiostor/csio_hw.c | 2 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 1 +
drivers/scsi/mpt3sas/mpt3sas_base.c | 14 +-
drivers/scsi/mvumi.c | 1 +
drivers/scsi/qedf/qedf_main.c | 2 +-
drivers/scsi/qedi/qedi_fw.c | 23 +-
drivers/scsi/qedi/qedi_iscsi.c | 2 +
drivers/scsi/qedi/qedi_main.c | 10 +
drivers/scsi/qla2xxx/qla_init.c | 10 +
drivers/scsi/qla2xxx/qla_inline.h | 5 +
drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
drivers/scsi/qla2xxx/qla_nvme.c | 2 +-
drivers/scsi/qla2xxx/qla_target.c | 2 +-
drivers/scsi/qla4xxx/ql4_os.c | 2 +-
drivers/scsi/smartpqi/smartpqi.h | 2 +-
drivers/scsi/smartpqi/smartpqi_init.c | 101 ++++---
drivers/scsi/ufs/ufs-mediatek.c | 6 -
drivers/scsi/ufs/ufs-qcom.c | 5 -
drivers/scsi/ufs/ufshcd.c | 3 +
drivers/slimbus/core.c | 6 +-
drivers/slimbus/qcom-ngd-ctrl.c | 4 +
drivers/soc/fsl/qbman/bman.c | 2 +-
drivers/soc/mediatek/mtk-cmdq-helper.c | 5 +-
drivers/soc/qcom/apr.c | 2 +-
drivers/soc/qcom/pdr_internal.h | 2 +-
drivers/soc/xilinx/zynqmp_power.c | 2 +-
drivers/spi/spi-dw-pci.c | 16 +-
drivers/spi/spi-fsi.c | 99 +++++--
drivers/spi/spi-omap2-mcspi.c | 17 +-
drivers/spi/spi-s3c64xx.c | 52 +++-
drivers/staging/emxx_udc/emxx_udc.c | 4 +-
drivers/staging/media/atomisp/pci/sh_css.c | 2 +-
drivers/staging/media/hantro/hantro_h264.c | 2 +-
drivers/staging/media/hantro/hantro_postproc.c | 4 +-
drivers/staging/media/ipu3/ipu3-css-params.c | 2 +-
.../phy-rockchip-dphy-rx0/phy-rockchip-dphy-rx0.c | 1 +
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/wfx/data_rx.c | 2 +-
drivers/staging/wilc1000/mon.c | 3 +-
drivers/staging/wilc1000/sdio.c | 5 +-
drivers/staging/wilc1000/spi.c | 5 +-
drivers/target/target_core_user.c | 2 +-
drivers/tty/hvc/Kconfig | 1 +
drivers/tty/hvc/hvcs.c | 14 +-
drivers/tty/ipwireless/network.c | 4 +-
drivers/tty/ipwireless/tty.c | 2 +-
drivers/tty/pty.c | 2 +-
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/fsl_lpuart.c | 16 +-
drivers/usb/cdns3/gadget.c | 2 +-
drivers/usb/class/cdc-acm.c | 23 ++
drivers/usb/class/cdc-wdm.c | 72 +++--
drivers/usb/core/urb.c | 89 +++---
drivers/usb/dwc2/gadget.c | 40 ++-
drivers/usb/dwc2/params.c | 2 +-
drivers/usb/dwc2/platform.c | 6 +-
drivers/usb/dwc3/core.c | 60 +++--
drivers/usb/dwc3/core.h | 7 +
drivers/usb/dwc3/dwc3-of-simple.c | 1 +
drivers/usb/gadget/function/f_ncm.c | 8 +-
drivers/usb/gadget/function/f_printer.c | 16 +-
drivers/usb/gadget/function/u_ether.c | 2 +-
drivers/usb/gadget/function/u_serial.c | 1 +
drivers/usb/gadget/udc/bcm63xx_udc.c | 1 +
drivers/usb/host/ohci-hcd.c | 16 +-
drivers/usb/host/xhci.c | 3 +-
drivers/vfio/pci/vfio_pci_config.c | 24 +-
drivers/vfio/pci/vfio_pci_intrs.c | 4 +-
drivers/vfio/vfio.c | 9 +-
drivers/vfio/vfio_iommu_type1.c | 6 +-
drivers/video/backlight/sky81452-backlight.c | 1 +
drivers/video/fbdev/aty/radeon_base.c | 2 +-
drivers/video/fbdev/core/fbmem.c | 4 +
drivers/video/fbdev/sis/init.c | 11 +-
drivers/video/fbdev/vga16fb.c | 14 +-
drivers/virt/fsl_hypervisor.c | 17 +-
drivers/watchdog/sp5100_tco.h | 2 +-
drivers/watchdog/watchdog_dev.c | 6 +-
fs/afs/cell.c | 283 +++++++++++--------
fs/afs/dynroot.c | 23 +-
fs/afs/internal.h | 15 +-
fs/afs/main.c | 2 +-
fs/afs/mntpt.c | 4 +-
fs/afs/proc.c | 23 +-
fs/afs/super.c | 16 +-
fs/afs/vl_alias.c | 8 +-
fs/afs/vl_rotate.c | 2 +-
fs/afs/volume.c | 4 +-
fs/btrfs/extent-io-tree.h | 1 +
fs/btrfs/volumes.c | 7 +-
fs/cifs/asn1.c | 16 +-
fs/cifs/cifsacl.c | 5 +-
fs/cifs/cifsproto.h | 2 +
fs/cifs/connect.c | 5 +-
fs/cifs/readdir.c | 5 +-
fs/cifs/smb2ops.c | 21 +-
fs/crypto/policy.c | 9 +-
fs/d_path.c | 6 +-
fs/dlm/config.c | 3 +
fs/ext4/ext4.h | 2 +-
fs/ext4/fsmap.c | 3 +
fs/ext4/mballoc.c | 37 ++-
fs/f2fs/inode.c | 7 +
fs/f2fs/sysfs.c | 1 +
fs/iomap/buffered-io.c | 25 +-
fs/iomap/direct-io.c | 10 +
fs/nfs/fs_context.c | 1 +
fs/ntfs/inode.c | 6 +
fs/proc/base.c | 3 +-
fs/quota/quota_v2.c | 1 +
fs/ramfs/file-nommu.c | 2 +-
fs/reiserfs/inode.c | 3 +-
fs/reiserfs/super.c | 8 +-
fs/udf/inode.c | 25 +-
fs/udf/super.c | 6 +
fs/xfs/libxfs/xfs_rtbitmap.c | 11 +-
fs/xfs/xfs_buf_item_recover.c | 2 +
fs/xfs/xfs_file.c | 17 +-
fs/xfs/xfs_fsmap.c | 48 ++--
fs/xfs/xfs_fsmap.h | 6 +-
fs/xfs/xfs_ioctl.c | 144 ++++++----
fs/xfs/xfs_rtalloc.c | 11 +
include/linux/bpf_verifier.h | 1 +
include/linux/mailbox/mtk-cmdq-mailbox.h | 3 +-
include/linux/oom.h | 1 +
include/linux/overflow.h | 1 +
include/linux/page_owner.h | 6 +-
include/linux/pci.h | 1 +
include/linux/platform_data/dma-dw.h | 2 +
include/linux/sched/coredump.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 5 +-
include/net/ip.h | 6 +
include/net/netfilter/nf_log.h | 1 +
include/net/tc_act/tc_tunnel_key.h | 5 +-
include/rdma/ib_umem.h | 9 +-
include/rdma/ib_verbs.h | 68 +----
include/scsi/scsi_common.h | 7 +
include/sound/hda_codec.h | 1 +
include/trace/events/target.h | 12 +-
include/uapi/linux/pci_regs.h | 1 +
include/uapi/linux/perf_event.h | 2 +-
kernel/bpf/percpu_freelist.c | 101 ++++++-
kernel/bpf/percpu_freelist.h | 1 +
kernel/bpf/verifier.c | 34 +++
kernel/debug/kdb/kdb_io.c | 8 +-
kernel/events/core.c | 7 +-
kernel/fork.c | 21 ++
kernel/module.c | 13 +-
kernel/power/hibernate.c | 11 -
kernel/rcu/rcutorture.c | 13 +-
kernel/rcu/tree.c | 2 +-
kernel/sched/core.c | 2 +-
kernel/sched/fair.c | 20 +-
kernel/sched/sched.h | 13 +-
kernel/trace/trace_events_synth.c | 18 +-
lib/crc32.c | 2 +-
lib/idr.c | 1 +
mm/filemap.c | 8 +-
mm/huge_memory.c | 2 +-
mm/memcontrol.c | 5 +-
mm/oom_kill.c | 2 +
mm/page_alloc.c | 4 +-
mm/page_owner.c | 4 +-
mm/swapfile.c | 4 +-
net/bluetooth/hci_core.c | 11 +
net/bluetooth/l2cap_sock.c | 7 +-
net/bridge/netfilter/ebt_dnat.c | 2 +-
net/bridge/netfilter/ebt_redirect.c | 2 +-
net/bridge/netfilter/ebt_snat.c | 2 +-
net/can/j1939/transport.c | 2 +
net/core/filter.c | 3 +-
net/core/skmsg.c | 14 +-
net/core/sock.c | 13 +-
net/ipv4/icmp.c | 7 +-
net/ipv4/ip_gre.c | 15 +-
net/ipv4/netfilter/nf_log_arp.c | 19 +-
net/ipv4/netfilter/nf_log_ipv4.c | 6 +-
net/ipv4/nexthop.c | 2 +-
net/ipv4/route.c | 4 +-
net/ipv4/tcp_input.c | 2 +
net/ipv6/ip6_fib.c | 4 +-
net/ipv6/netfilter/nf_log_ipv6.c | 8 +-
net/mac80211/cfg.c | 3 +-
net/mac80211/sta_info.c | 4 +
net/mptcp/options.c | 3 +-
net/mptcp/protocol.h | 2 +-
net/mptcp/subflow.c | 3 +-
net/netfilter/ipvs/ip_vs_ctl.c | 7 +-
net/netfilter/ipvs/ip_vs_xmit.c | 6 +
net/netfilter/nf_conntrack_proto_tcp.c | 19 +-
net/netfilter/nf_dup_netdev.c | 1 +
net/netfilter/nf_log_common.c | 12 +
net/netfilter/nft_fwd_netdev.c | 1 +
net/nfc/netlink.c | 2 +-
net/sched/act_api.c | 14 -
net/sched/act_ct.c | 4 +-
net/sched/act_tunnel_key.c | 2 +-
net/sched/cls_api.c | 2 +-
net/smc/smc_core.c | 2 +-
net/smc/smc_llc.c | 13 +-
net/sunrpc/auth_gss/svcauth_gss.c | 27 +-
net/sunrpc/xprtrdma/svc_rdma_sendto.c | 3 +-
net/tipc/bcast.c | 10 +-
net/tipc/msg.c | 3 +-
net/tls/tls_device.c | 11 +-
net/wireless/nl80211.c | 21 +-
samples/bpf/xdpsock_user.c | 10 +-
samples/mic/mpssd/mpssd.c | 4 +-
scripts/package/builddeb | 6 +-
scripts/package/mkdebian | 19 +-
security/integrity/ima/ima_crypto.c | 2 +
security/integrity/ima/ima_main.c | 10 +
sound/core/seq/oss/seq_oss.c | 7 +-
sound/firewire/bebob/bebob_hwdep.c | 3 +-
sound/pci/hda/hda_intel.c | 14 +-
sound/pci/hda/hda_jack.c | 22 +-
sound/pci/hda/patch_ca0132.c | 24 +-
sound/pci/hda/patch_hdmi.c | 20 +-
sound/pci/hda/patch_realtek.c | 56 ++++
sound/soc/codecs/Kconfig | 1 +
sound/soc/codecs/tas2770.c | 93 +++----
sound/soc/codecs/tlv320adcx140.c | 2 +-
sound/soc/codecs/tlv320aic32x4.c | 9 +-
sound/soc/codecs/wm_adsp.c | 20 +-
sound/soc/fsl/fsl_sai.c | 19 +-
sound/soc/fsl/fsl_sai.h | 1 +
sound/soc/fsl/imx-es8328.c | 12 +-
sound/soc/intel/boards/sof_rt5682.c | 13 +
sound/soc/qcom/lpass-cpu.c | 16 --
sound/soc/qcom/lpass-platform.c | 3 +-
sound/soc/soc-topology.c | 11 +
sound/soc/sof/control.c | 11 +
sound/soc/sof/intel/hda.c | 8 +-
sound/soc/sof/sof-pci-dev.c | 24 ++
sound/usb/format.c | 1 +
tools/build/Makefile.feature | 5 +-
tools/build/feature/Makefile | 2 +-
tools/build/feature/test-all.c | 10 -
tools/lib/bpf/libbpf.c | 57 ++--
tools/lib/perf/evlist.c | 3 +
tools/perf/Makefile.config | 4 +-
tools/perf/Makefile.perf | 6 +-
tools/perf/builtin-stat.c | 4 +-
tools/perf/builtin-trace.c | 6 +-
tools/perf/builtin-version.c | 1 -
tools/perf/util/intel-pt.c | 8 +-
tools/testing/radix-tree/idr-test.c | 29 ++
tools/testing/selftests/bpf/bench.c | 3 -
tools/testing/selftests/bpf/benchs/bench_rename.c | 17 --
tools/testing/selftests/bpf/prog_tests/bpf_iter.c | 14 +-
tools/testing/selftests/bpf/prog_tests/sk_assign.c | 2 +-
.../testing/selftests/bpf/prog_tests/sockopt_sk.c | 4 +-
.../selftests/bpf/prog_tests/test_overhead.c | 14 +-
tools/testing/selftests/bpf/progs/test_overhead.c | 6 -
.../selftests/bpf/progs/test_sysctl_loop1.c | 4 +-
.../selftests/bpf/progs/test_sysctl_loop2.c | 4 +-
tools/testing/selftests/bpf/progs/test_vmlinux.c | 12 +-
.../trigger-inter-event-combined-hist.tc | 8 +-
tools/testing/selftests/lkdtm/run.sh | 2 +-
tools/testing/selftests/net/config | 1 +
.../selftests/net/forwarding/vxlan_asymmetric.sh | 10 +
.../selftests/net/forwarding/vxlan_symmetric.sh | 10 +
tools/testing/selftests/net/mptcp/mptcp_connect.sh | 4 +-
tools/testing/selftests/net/mptcp/mptcp_join.sh | 4 +-
tools/testing/selftests/net/rtnetlink.sh | 5 +
tools/testing/selftests/powerpc/eeh/eeh-basic.sh | 9 +-
tools/testing/selftests/vm/config | 1 +
665 files changed, 5459 insertions(+), 2941 deletions(-)
From: Qinglang Miao <[email protected]>
[ Upstream commit 7995bd13296111d672d8c5959f5e81dbbbda5286 ]
When vkms_init() get into out_put, the unregister call of
vkms_device->platform is missing. So add it before return.
Fixes: ac19f140bc27 ("drm/vkms: Use drmm_add_final_kfree")
Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
index 1e8b2169d8341..e6a3ea1b399a7 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.c
+++ b/drivers/gpu/drm/vkms/vkms_drv.c
@@ -188,8 +188,8 @@ static int __init vkms_init(void)
out_put:
drm_dev_put(&vkms_device->drm);
+ platform_device_unregister(vkms_device->platform);
return ret;
-
out_unregister:
platform_device_unregister(vkms_device->platform);
out_free:
--
2.25.1
From: Qinglang Miao <[email protected]>
[ Upstream commit 57fb54082d5d14512dfd21bc39d91945d3ad1ee9 ]
When vgem_init() get into out_put, the unregister call of
vgem_device->platform is missing. So add it before return.
Fixes: 363de9e7d4f6 ("drm/vgem: Use drmm_add_final_kfree")
Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vgem/vgem_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vgem/vgem_drv.c b/drivers/gpu/drm/vgem/vgem_drv.c
index fa39d140adc6c..94825ec3a09d8 100644
--- a/drivers/gpu/drm/vgem/vgem_drv.c
+++ b/drivers/gpu/drm/vgem/vgem_drv.c
@@ -471,8 +471,8 @@ static int __init vgem_init(void)
out_put:
drm_dev_put(&vgem_device->drm);
+ platform_device_unregister(vgem_device->platform);
return ret;
-
out_unregister:
platform_device_unregister(vgem_device->platform);
out_free:
--
2.25.1
From: Venkateswara Naralasetty <[email protected]>
[ Upstream commit 720e5c03e5cb26d33d97f55192b791bb48478aa5 ]
It is expected that the returned counters by .get_survey are monotonic
increasing. But the data from ath10k gets reset to zero regularly. Channel
active/busy time are then showing incorrect values (less than previous or
sometimes zero) for the currently active channel during successive survey
dump commands.
example:
$ iw dev wlan0 survey dump
Survey data from wlan0
frequency: 5180 MHz [in use]
channel active time: 54995 ms
channel busy time: 432 ms
channel receive time: 0 ms
channel transmit time: 59 ms
...
$ iw dev wlan0 survey dump
Survey data from wlan0
frequency: 5180 MHz [in use]
channel active time: 32592 ms
channel busy time: 254 ms
channel receive time: 0 ms
channel transmit time: 0 ms
...
The correct way to handle this is to use the non-clearing
WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will
then accumulate the survey data and handle wrap arounds.
Tested-on: QCA9984 hw1.0 10.4-3.5.3-00057
Tested-on: QCA988X hw2.0 10.2.4-1.0-00047
Tested-on: QCA9888 hw2.0 10.4-3.9.0.2-00024
Tested-on: QCA4019 hw1.0 10.4-3.6-00140
Fixes: fa7937e3d5c2 ("ath10k: update bss channel survey information")
Signed-off-by: Venkateswara Naralasetty <[email protected]>
Tested-by: Markus Theil <[email protected]>
Tested-by: John Deere <[email protected]>
[[email protected]: adjust commit message]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 919d15584d4a2..77daca67a8e14 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7283,7 +7283,7 @@ ath10k_mac_update_bss_chan_survey(struct ath10k *ar,
struct ieee80211_channel *channel)
{
int ret;
- enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
+ enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ;
lockdep_assert_held(&ar->conf_mutex);
--
2.25.1
From: Tingwei Zhang <[email protected]>
[ Upstream commit 984f37efa3857dcefa649fbdf64abb94591935c3 ]
Deadlock as below is triggered by one CPU holds drvdata->spinlock
and calls cti_enable_hw(). Smp_call_function_single() is called
in cti_enable_hw() and tries to let another CPU write CTI registers.
That CPU is trying to get drvdata->spinlock in cti_cpu_pm_notify()
and doesn't response to IPI from smp_call_function_single().
[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L
5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1
[ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT)
[ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--)
[ 988.357689] pc : smp_call_function_single+0x158/0x1b8
[ 988.362782] lr : smp_call_function_single+0x124/0x1b8
...
[ 988.451638] Call trace:
[ 988.454119] smp_call_function_single+0x158/0x1b8
[ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti]
[ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight]
[ 988.469855] coresight_enable+0x1f0/0x364 [coresight]
[ 988.474957] enable_source_store+0x5c/0x9c [coresight]
[ 988.480140] dev_attr_store+0x14/0x28
[ 988.483839] sysfs_kf_write+0x38/0x4c
[ 988.487532] kernfs_fop_write+0x1c0/0x2b0
[ 988.491585] vfs_write+0xfc/0x300
[ 988.494931] ksys_write+0x78/0xe0
[ 988.498283] __arm64_sys_write+0x18/0x20
[ 988.502240] el0_svc_common+0x98/0x160
[ 988.506024] do_el0_svc+0x78/0x80
[ 988.509377] el0_sync_handler+0xd4/0x270
[ 988.513337] el0_sync+0x164/0x180
This change write CTI registers directly in cti_enable_hw().
Config->hw_powered has been checked to be true with spinlock holded.
CTI is powered and can be programmed until spinlock is released.
Fixes: 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: Tingwei Zhang <[email protected]>
[Re-ordered variable declaration]
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-cti.c | 24 +++++----------------
1 file changed, 5 insertions(+), 19 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c
index c4e9cc7034ab7..47f3c9abae303 100644
--- a/drivers/hwtracing/coresight/coresight-cti.c
+++ b/drivers/hwtracing/coresight/coresight-cti.c
@@ -86,22 +86,16 @@ void cti_write_all_hw_regs(struct cti_drvdata *drvdata)
CS_LOCK(drvdata->base);
}
-static void cti_enable_hw_smp_call(void *info)
-{
- struct cti_drvdata *drvdata = info;
-
- cti_write_all_hw_regs(drvdata);
-}
-
/* write regs to hardware and enable */
static int cti_enable_hw(struct cti_drvdata *drvdata)
{
struct cti_config *config = &drvdata->config;
struct device *dev = &drvdata->csdev->dev;
+ unsigned long flags;
int rc = 0;
pm_runtime_get_sync(dev->parent);
- spin_lock(&drvdata->spinlock);
+ spin_lock_irqsave(&drvdata->spinlock, flags);
/* no need to do anything if enabled or unpowered*/
if (config->hw_enabled || !config->hw_powered)
@@ -112,19 +106,11 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)
if (rc)
goto cti_err_not_enabled;
- if (drvdata->ctidev.cpu >= 0) {
- rc = smp_call_function_single(drvdata->ctidev.cpu,
- cti_enable_hw_smp_call,
- drvdata, 1);
- if (rc)
- goto cti_err_not_enabled;
- } else {
- cti_write_all_hw_regs(drvdata);
- }
+ cti_write_all_hw_regs(drvdata);
config->hw_enabled = true;
atomic_inc(&drvdata->config.enable_req_count);
- spin_unlock(&drvdata->spinlock);
+ spin_unlock_irqrestore(&drvdata->spinlock, flags);
return rc;
cti_state_unchanged:
@@ -132,7 +118,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)
/* cannot enable due to error */
cti_err_not_enabled:
- spin_unlock(&drvdata->spinlock);
+ spin_unlock_irqrestore(&drvdata->spinlock, flags);
pm_runtime_put(dev->parent);
return rc;
}
--
2.25.1
From: [email protected] <[email protected]>
[ Upstream commit b7b57a5643c2ae45afe6aa5e73363b553cacd14b ]
pm_runtime_get_sync() increments the runtime PM usage counter
even when it returns an error code. However, users of cc_pm_get(),
a direct wrapper of pm_runtime_get_sync(), assume that PM usage
counter will not change on error. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Fixes: 8c7849a30255c ("crypto: ccree - simplify Runtime PM handling")
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ccree/cc_pm.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/ccree/cc_pm.c b/drivers/crypto/ccree/cc_pm.c
index d39e1664fc7ed..3c65bf070c908 100644
--- a/drivers/crypto/ccree/cc_pm.c
+++ b/drivers/crypto/ccree/cc_pm.c
@@ -65,8 +65,12 @@ const struct dev_pm_ops ccree_pm = {
int cc_pm_get(struct device *dev)
{
int rc = pm_runtime_get_sync(dev);
+ if (rc < 0) {
+ pm_runtime_put_noidle(dev);
+ return rc;
+ }
- return (rc == 1 ? 0 : rc);
+ return 0;
}
void cc_pm_put_suspend(struct device *dev)
--
2.25.1
From: Eric Biggers <[email protected]>
[ Upstream commit 5e895bd4d5233cb054447d0491d4e63c8496d419 ]
When an encryption policy has the IV_INO_LBLK_32 flag set, the IV
generation method involves hashing the inode number. This is different
from fscrypt's other IV generation methods, where the inode number is
either not used at all or is included directly in the IVs.
Therefore, in principle IV_INO_LBLK_32 can work with any length inode
number. However, currently fscrypt gets the inode number from
inode::i_ino, which is 'unsigned long'. So currently the implementation
limit is actually 32 bits (like IV_INO_LBLK_64), since longer inode
numbers will have been truncated by the VFS on 32-bit platforms.
Fix fscrypt_supported_v2_policy() to enforce the correct limit.
This doesn't actually matter currently, since only ext4 and f2fs support
IV_INO_LBLK_32, and they both only support 32-bit inode numbers. But we
might as well fix it in case it matters in the future.
Ideally inode::i_ino would instead be made 64-bit, but for now it's not
needed. (Note, this limit does *not* prevent filesystems with 64-bit
inode numbers from adding fscrypt support, since IV_INO_LBLK_* support
is optional and is useful only on certain hardware.)
Fixes: e3b1078bedd3 ("fscrypt: add support for IV_INO_LBLK_32 policies")
Reported-by: Jeff Layton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/crypto/policy.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/fs/crypto/policy.c b/fs/crypto/policy.c
index d23ff162c78bc..0b32c64eb4053 100644
--- a/fs/crypto/policy.c
+++ b/fs/crypto/policy.c
@@ -178,10 +178,15 @@ static bool fscrypt_supported_v2_policy(const struct fscrypt_policy_v2 *policy,
32, 32))
return false;
+ /*
+ * IV_INO_LBLK_32 hashes the inode number, so in principle it can
+ * support any ino_bits. However, currently the inode number is gotten
+ * from inode::i_ino which is 'unsigned long'. So for now the
+ * implementation limit is 32 bits.
+ */
if ((policy->flags & FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32) &&
- /* This uses hashed inode numbers, so ino_bits doesn't matter. */
!supported_iv_ino_lblk_policy(policy, inode, "IV_INO_LBLK_32",
- INT_MAX, 32))
+ 32, 32))
return false;
if (memchr_inv(policy->__reserved, 0, sizeof(policy->__reserved))) {
--
2.25.1
From: Tom Rix <[email protected]>
[ Upstream commit 52438c4463ac904d14bf3496765e67750766f3a6 ]
clang static analysis reports this error
m5mols_core.c:767:4: warning: Called function pointer
is null (null dereference) [core.CallAndMessage]
info->set_power(&client->dev, 0);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In other places, the set_power ptr is checked.
So add a check.
Fixes: bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/m5mols/m5mols_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c
index de295114ca482..21666d705e372 100644
--- a/drivers/media/i2c/m5mols/m5mols_core.c
+++ b/drivers/media/i2c/m5mols/m5mols_core.c
@@ -764,7 +764,8 @@ static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
if (ret) {
- info->set_power(&client->dev, 0);
+ if (info->set_power)
+ info->set_power(&client->dev, 0);
return ret;
}
--
2.25.1
From: Samuel Holland <[email protected]>
[ Upstream commit 3b799254cf6f481460719023d7a18f46651e5e7f ]
If hci_uart_tty_close() or hci_uart_unregister_device() is called while
hu->init_ready is scheduled, hci_register_dev() could be called after
the hci_uart is torn down. Avoid this by ensuring the work is complete
or canceled before checking the HCI_UART_REGISTERED flag.
Fixes: 9f2aee848fe6 ("Bluetooth: Add delayed init sequence support for UART controllers")
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_ldisc.c | 1 +
drivers/bluetooth/hci_serdev.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 85a30fb9177bb..f83d67eafc9f0 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -538,6 +538,7 @@ static void hci_uart_tty_close(struct tty_struct *tty)
clear_bit(HCI_UART_PROTO_READY, &hu->flags);
percpu_up_write(&hu->proto_lock);
+ cancel_work_sync(&hu->init_ready);
cancel_work_sync(&hu->write_work);
if (hdev) {
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index 7b233312e723f..3977bba485c22 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -355,6 +355,8 @@ void hci_uart_unregister_device(struct hci_uart *hu)
struct hci_dev *hdev = hu->hdev;
clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+
+ cancel_work_sync(&hu->init_ready);
if (test_bit(HCI_UART_REGISTERED, &hu->flags))
hci_unregister_dev(hdev);
hci_free_dev(hdev);
--
2.25.1
From: Xie He <[email protected]>
[ Upstream commit 01c4ceae0a38a0bdbfea6896f41efcd985a9c064 ]
The hdlc_rcv function is used as hdlc_packet_type.func to process any
skb received in the kernel with skb->protocol == htons(ETH_P_HDLC).
The purpose of this function is to provide second-stage processing for
skbs not assigned a "real" L3 skb->protocol value in the first stage.
This function assumes the device from which the skb is received is an
HDLC device (a device created by this module). It assumes that
netdev_priv(dev) returns a pointer to "struct hdlc_device".
However, it is possible that some driver in the kernel (not necessarily
in our control) submits a received skb with skb->protocol ==
htons(ETH_P_HDLC), from a non-HDLC device. In this case, the skb would
still be received by hdlc_rcv. This will cause problems.
hdlc_rcv should be able to recognize and drop invalid skbs. It should
first make sure "dev" is actually an HDLC device, before starting its
processing. This patch adds this check to hdlc_rcv.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Krzysztof Halasa <[email protected]>
Signed-off-by: Xie He <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wan/hdlc.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -46,7 +46,15 @@ static struct hdlc_proto *first_proto;
static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *p, struct net_device *orig_dev)
{
- struct hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct hdlc_device *hdlc;
+
+ /* First make sure "dev" is an HDLC device */
+ if (!(dev->priv_flags & IFF_WAN_HDLC)) {
+ kfree_skb(skb);
+ return NET_RX_SUCCESS;
+ }
+
+ hdlc = dev_to_hdlc(dev);
if (!net_eq(dev_net(dev), &init_net)) {
kfree_skb(skb);
From: Tom Rix <[email protected]>
[ Upstream commit 877cb8a444dad2304e891294afb0915fe3c278d6 ]
tc358743_cec_isr is misnammed, it is not the main isr.
So rename it to be consistent with its siblings,
tc358743_cec_handler.
It also does not check if its input parameter 'handled' is
is non NULL like its siblings, so add a check.
Fixes: a0ec8d1dc42e ("media: tc358743: add CEC support")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/tc358743.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index 211caade9f998..cff99cf61ed4d 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -919,8 +919,8 @@ static const struct cec_adap_ops tc358743_cec_adap_ops = {
.adap_monitor_all_enable = tc358743_cec_adap_monitor_all_enable,
};
-static void tc358743_cec_isr(struct v4l2_subdev *sd, u16 intstatus,
- bool *handled)
+static void tc358743_cec_handler(struct v4l2_subdev *sd, u16 intstatus,
+ bool *handled)
{
struct tc358743_state *state = to_state(sd);
unsigned int cec_rxint, cec_txint;
@@ -953,7 +953,8 @@ static void tc358743_cec_isr(struct v4l2_subdev *sd, u16 intstatus,
cec_transmit_attempt_done(state->cec_adap,
CEC_TX_STATUS_ERROR);
}
- *handled = true;
+ if (handled)
+ *handled = true;
}
if ((intstatus & MASK_CEC_RINT) &&
(cec_rxint & MASK_CECRIEND)) {
@@ -968,7 +969,8 @@ static void tc358743_cec_isr(struct v4l2_subdev *sd, u16 intstatus,
msg.msg[i] = v & 0xff;
}
cec_received_msg(state->cec_adap, &msg);
- *handled = true;
+ if (handled)
+ *handled = true;
}
i2c_wr16(sd, INTSTATUS,
intstatus & (MASK_CEC_RINT | MASK_CEC_TINT));
@@ -1432,7 +1434,7 @@ static int tc358743_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
#ifdef CONFIG_VIDEO_TC358743_CEC
if (intstatus & (MASK_CEC_RINT | MASK_CEC_TINT)) {
- tc358743_cec_isr(sd, intstatus, handled);
+ tc358743_cec_handler(sd, intstatus, handled);
i2c_wr16(sd, INTSTATUS,
intstatus & (MASK_CEC_RINT | MASK_CEC_TINT));
intstatus &= ~(MASK_CEC_RINT | MASK_CEC_TINT);
--
2.25.1
From: Madhuparna Bhowmik <[email protected]>
[ Upstream commit 64f4a62e3b17f1e473f971127c2924cae42afc82 ]
engine->stat_irq_thresh was initialized after device_create_file() in
the probe function, the initialization may race with call to
spacc_stat_irq_thresh_store() which updates engine->stat_irq_thresh,
therefore initialize it before creating the file in probe function.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: ce92136843cb ("crypto: picoxcell - add support for the...")
Signed-off-by: Madhuparna Bhowmik <[email protected]>
Acked-by: Jamie Iles <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/picoxcell_crypto.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 7384e91c8b32b..0d32b641a7f9d 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -1666,11 +1666,6 @@ static int spacc_probe(struct platform_device *pdev)
goto err_clk_put;
}
- ret = device_create_file(&pdev->dev, &dev_attr_stat_irq_thresh);
- if (ret)
- goto err_clk_disable;
-
-
/*
* Use an IRQ threshold of 50% as a default. This seems to be a
* reasonable trade off of latency against throughput but can be
@@ -1678,6 +1673,10 @@ static int spacc_probe(struct platform_device *pdev)
*/
engine->stat_irq_thresh = (engine->fifo_sz / 2);
+ ret = device_create_file(&pdev->dev, &dev_attr_stat_irq_thresh);
+ if (ret)
+ goto err_clk_disable;
+
/*
* Configure the interrupts. We only use the STAT_CNT interrupt as we
* only submit a new packet for processing when we complete another in
--
2.25.1
From: Tom Rix <[email protected]>
[ Upstream commit 505bfc2a142f12ce7bc7a878b44abc3496f2e747 ]
clang static analysis reports this problem
tuner-simple.c:714:13: warning: Assigned value is
garbage or undefined
buffer[1] = buffer[3];
^ ~~~~~~~~~
In simple_set_radio_freq buffer[3] used to be done
in-function with a switch of tuner type, now done
by a call to simple_radio_bandswitch which has this case
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
tuner_dbg("This tuner doesn't ...
return 0;
which does not set buffer[3]. In the old logic, this case
would have returned 0 from simple_set_radio_freq.
Recover this old behavior by returning an error for this
codition. Since the old simple_set_radio_freq behavior
returned a 0, do the same.
Fixes: c7a9f3aa1e1b ("V4L/DVB (7129): tuner-simple: move device-specific code into three separate functions")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/tuners/tuner-simple.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/media/tuners/tuner-simple.c b/drivers/media/tuners/tuner-simple.c
index b6e70fada3fb2..8fb186b25d6af 100644
--- a/drivers/media/tuners/tuner-simple.c
+++ b/drivers/media/tuners/tuner-simple.c
@@ -500,7 +500,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n");
- return 0;
+ return -EINVAL;
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
case TUNER_PHILIPS_FMD1216ME_MK3:
@@ -702,7 +702,8 @@ static int simple_set_radio_freq(struct dvb_frontend *fe,
TUNER_RATIO_SELECT_50; /* 50 kHz step */
/* Bandswitch byte */
- simple_radio_bandswitch(fe, &buffer[0]);
+ if (simple_radio_bandswitch(fe, &buffer[0]))
+ return 0;
/* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
--
2.25.1
From: Corentin Labbe <[email protected]>
[ Upstream commit 87f34260f5e09a4578132ad1c05aef2d707dd4bf ]
t_common_ctl is LE32 so we need to convert its value before using it.
This value is only used on H6 (ignored on other SoCs) and not handling
the endianness cause failure on xRNG/hashes operations on H6 when running BE.
Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
index b957061424a1f..8f3d6d31da52f 100644
--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c
@@ -120,7 +120,10 @@ int sun8i_ce_run_task(struct sun8i_ce_dev *ce, int flow, const char *name)
/* Be sure all data is written before enabling the task */
wmb();
- v = 1 | (ce->chanlist[flow].tl->t_common_ctl & 0x7F) << 8;
+ /* Only H6 needs to write a part of t_common_ctl along with "1", but since it is ignored
+ * on older SoCs, we have no reason to complicate things.
+ */
+ v = 1 | ((le32_to_cpu(ce->chanlist[flow].tl->t_common_ctl) & 0x7F) << 8);
writel(v, ce->base + CE_TLR);
mutex_unlock(&ce->mlock);
--
2.25.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit b1751ae652fb95919c08df5bdd739ccf9886158a ]
In preparation for adding DVP configuration in s_power callback
move mipi configuration into separate function
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Tested-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov5640.c | 116 +++++++++++++++++++------------------
1 file changed, 60 insertions(+), 56 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 6e558a7e2d244..90db5443c4248 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2014,6 +2014,61 @@ static void ov5640_set_power_off(struct ov5640_dev *sensor)
clk_disable_unprepare(sensor->xclk);
}
+static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on)
+{
+ int ret;
+
+ if (!on) {
+ /* Reset MIPI bus settings to their default values. */
+ ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58);
+ ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04);
+ ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00);
+ return 0;
+ }
+
+ /*
+ * Power up MIPI HS Tx and LS Rx; 2 data lanes mode
+ *
+ * 0x300e = 0x40
+ * [7:5] = 010 : 2 data lanes mode (see FIXME note in
+ * "ov5640_set_stream_mipi()")
+ * [4] = 0 : Power up MIPI HS Tx
+ * [3] = 0 : Power up MIPI LS Rx
+ * [2] = 0 : MIPI interface disabled
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40);
+ if (ret)
+ return ret;
+
+ /*
+ * Gate clock and set LP11 in 'no packets mode' (idle)
+ *
+ * 0x4800 = 0x24
+ * [5] = 1 : Gate clock when 'no packets'
+ * [2] = 1 : MIPI bus in LP11 when 'no packets'
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24);
+ if (ret)
+ return ret;
+
+ /*
+ * Set data lanes and clock in LP11 when 'sleeping'
+ *
+ * 0x3019 = 0x70
+ * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping'
+ * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping'
+ * [4] = 1 : MIPI clock lane in LP11 when 'sleeping'
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70);
+ if (ret)
+ return ret;
+
+ /* Give lanes some time to coax into LP11 state. */
+ usleep_range(500, 1000);
+
+ return 0;
+}
+
static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
{
int ret = 0;
@@ -2026,67 +2081,16 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
ret = ov5640_restore_mode(sensor);
if (ret)
goto power_off;
+ }
- /* We're done here for DVP bus, while CSI-2 needs setup. */
- if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
- return 0;
-
- /*
- * Power up MIPI HS Tx and LS Rx; 2 data lanes mode
- *
- * 0x300e = 0x40
- * [7:5] = 010 : 2 data lanes mode (see FIXME note in
- * "ov5640_set_stream_mipi()")
- * [4] = 0 : Power up MIPI HS Tx
- * [3] = 0 : Power up MIPI LS Rx
- * [2] = 0 : MIPI interface disabled
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_IO_MIPI_CTRL00, 0x40);
- if (ret)
- goto power_off;
-
- /*
- * Gate clock and set LP11 in 'no packets mode' (idle)
- *
- * 0x4800 = 0x24
- * [5] = 1 : Gate clock when 'no packets'
- * [2] = 1 : MIPI bus in LP11 when 'no packets'
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_MIPI_CTRL00, 0x24);
- if (ret)
- goto power_off;
-
- /*
- * Set data lanes and clock in LP11 when 'sleeping'
- *
- * 0x3019 = 0x70
- * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping'
- * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping'
- * [4] = 1 : MIPI clock lane in LP11 when 'sleeping'
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_PAD_OUTPUT00, 0x70);
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
+ ret = ov5640_set_power_mipi(sensor, on);
if (ret)
goto power_off;
+ }
- /* Give lanes some time to coax into LP11 state. */
- usleep_range(500, 1000);
-
- } else {
- if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
- /* Reset MIPI bus settings to their default values. */
- ov5640_write_reg(sensor,
- OV5640_REG_IO_MIPI_CTRL00, 0x58);
- ov5640_write_reg(sensor,
- OV5640_REG_MIPI_CTRL00, 0x04);
- ov5640_write_reg(sensor,
- OV5640_REG_PAD_OUTPUT00, 0x00);
- }
-
+ if (!on)
ov5640_set_power_off(sensor);
- }
return 0;
--
2.25.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit cdd4f7824994c9254acc6e415750529ea2d2cfe0 ]
The fwnode reference corresponding to the endpoint is leaked in an error
path of the rcar_drif_parse_subdevs() function. Fix it, and reorganize
fwnode reference handling in the function to release references early,
simplifying error paths.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar_drif.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/media/platform/rcar_drif.c b/drivers/media/platform/rcar_drif.c
index 3d2451ac347d7..3f1e5cb8b1976 100644
--- a/drivers/media/platform/rcar_drif.c
+++ b/drivers/media/platform/rcar_drif.c
@@ -1227,28 +1227,22 @@ static int rcar_drif_parse_subdevs(struct rcar_drif_sdr *sdr)
if (!ep)
return 0;
+ /* Get the endpoint properties */
+ rcar_drif_get_ep_properties(sdr, ep);
+
fwnode = fwnode_graph_get_remote_port_parent(ep);
+ fwnode_handle_put(ep);
if (!fwnode) {
dev_warn(sdr->dev, "bad remote port parent\n");
- fwnode_handle_put(ep);
return -EINVAL;
}
sdr->ep.asd.match.fwnode = fwnode;
sdr->ep.asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
ret = v4l2_async_notifier_add_subdev(notifier, &sdr->ep.asd);
- if (ret) {
- fwnode_handle_put(fwnode);
- return ret;
- }
-
- /* Get the endpoint properties */
- rcar_drif_get_ep_properties(sdr, ep);
-
fwnode_handle_put(fwnode);
- fwnode_handle_put(ep);
- return 0;
+ return ret;
}
/* Check if the given device is the primary bond */
--
2.25.1
From: Eddie James <[email protected]>
[ Upstream commit 49c9fc1d7c101eceaddb655e4f0e062b0c8f403b ]
Some of the FSI-attached SPI controllers cannot use the loop command in
programming the sequencer due to security requirements. Check the
devicetree compatibility that indicates this condition and restrict the
size for these controllers. Also, add more transfers directly in the
sequence up to the length of the sequence register.
Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsi.c | 65 +++++++++++++++++++++++++++++++++++--------
1 file changed, 53 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c
index bb18b407cdcf3..ef5e0826a53c3 100644
--- a/drivers/spi/spi-fsi.c
+++ b/drivers/spi/spi-fsi.c
@@ -24,7 +24,8 @@
#define SPI_FSI_BASE 0x70000
#define SPI_FSI_INIT_TIMEOUT_MS 1000
-#define SPI_FSI_MAX_TRANSFER_SIZE 2048
+#define SPI_FSI_MAX_XFR_SIZE 2048
+#define SPI_FSI_MAX_XFR_SIZE_RESTRICTED 32
#define SPI_FSI_ERROR 0x0
#define SPI_FSI_COUNTER_CFG 0x1
@@ -74,6 +75,8 @@ struct fsi_spi {
struct device *dev; /* SPI controller device */
struct fsi_device *fsi; /* FSI2SPI CFAM engine device */
u32 base;
+ size_t max_xfr_size;
+ bool restricted;
};
struct fsi_spi_sequence {
@@ -209,8 +212,12 @@ static int fsi_spi_reset(struct fsi_spi *ctx)
if (rc)
return rc;
- return fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG,
- SPI_FSI_CLOCK_CFG_RESET2);
+ rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG,
+ SPI_FSI_CLOCK_CFG_RESET2);
+ if (rc)
+ return rc;
+
+ return fsi_spi_write_reg(ctx, SPI_FSI_STATUS, 0ULL);
}
static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
@@ -218,8 +225,8 @@ static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
/*
* Add the next byte of instruction to the 8-byte sequence register.
* Then decrement the counter so that the next instruction will go in
- * the right place. Return the number of "slots" left in the sequence
- * register.
+ * the right place. Return the index of the slot we just filled in the
+ * sequence register.
*/
seq->data |= (u64)val << seq->bit;
seq->bit -= 8;
@@ -237,9 +244,11 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
struct fsi_spi_sequence *seq,
struct spi_transfer *transfer)
{
+ bool docfg = false;
int loops;
int idx;
int rc;
+ u8 val = 0;
u8 len = min(transfer->len, 8U);
u8 rem = transfer->len % len;
u64 cfg = 0ULL;
@@ -247,22 +256,42 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
loops = transfer->len / len;
if (transfer->tx_buf) {
- idx = fsi_spi_sequence_add(seq,
- SPI_FSI_SEQUENCE_SHIFT_OUT(len));
+ val = SPI_FSI_SEQUENCE_SHIFT_OUT(len);
+ idx = fsi_spi_sequence_add(seq, val);
+
if (rem)
rem = SPI_FSI_SEQUENCE_SHIFT_OUT(rem);
} else if (transfer->rx_buf) {
- idx = fsi_spi_sequence_add(seq,
- SPI_FSI_SEQUENCE_SHIFT_IN(len));
+ val = SPI_FSI_SEQUENCE_SHIFT_IN(len);
+ idx = fsi_spi_sequence_add(seq, val);
+
if (rem)
rem = SPI_FSI_SEQUENCE_SHIFT_IN(rem);
} else {
return -EINVAL;
}
+ if (ctx->restricted) {
+ const int eidx = rem ? 5 : 6;
+
+ while (loops > 1 && idx <= eidx) {
+ idx = fsi_spi_sequence_add(seq, val);
+ loops--;
+ docfg = true;
+ }
+
+ if (loops > 1) {
+ dev_warn(ctx->dev, "No sequencer slots; aborting.\n");
+ return -EINVAL;
+ }
+ }
+
if (loops > 1) {
fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
+ docfg = true;
+ }
+ if (docfg) {
cfg = SPI_FSI_COUNTER_CFG_LOOPS(loops - 1);
if (transfer->rx_buf)
cfg |= SPI_FSI_COUNTER_CFG_N2_RX |
@@ -273,6 +302,8 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, cfg);
if (rc)
return rc;
+ } else {
+ fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL);
}
if (rem)
@@ -429,7 +460,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
/* Sequencer must do shift out (tx) first. */
if (!transfer->tx_buf ||
- transfer->len > SPI_FSI_MAX_TRANSFER_SIZE) {
+ transfer->len > (ctx->max_xfr_size + 8)) {
rc = -EINVAL;
goto error;
}
@@ -453,7 +484,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
/* Sequencer can only do shift in (rx) after tx. */
if (next->rx_buf) {
- if (next->len > SPI_FSI_MAX_TRANSFER_SIZE) {
+ if (next->len > ctx->max_xfr_size) {
rc = -EINVAL;
goto error;
}
@@ -498,7 +529,9 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
static size_t fsi_spi_max_transfer_size(struct spi_device *spi)
{
- return SPI_FSI_MAX_TRANSFER_SIZE;
+ struct fsi_spi *ctx = spi_controller_get_devdata(spi->controller);
+
+ return ctx->max_xfr_size;
}
static int fsi_spi_probe(struct device *dev)
@@ -546,6 +579,14 @@ static int fsi_spi_probe(struct device *dev)
ctx->fsi = fsi;
ctx->base = base + SPI_FSI_BASE;
+ if (of_device_is_compatible(np, "ibm,fsi2spi-restricted")) {
+ ctx->restricted = true;
+ ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE_RESTRICTED;
+ } else {
+ ctx->restricted = false;
+ ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE;
+ }
+
rc = devm_spi_register_controller(dev, ctlr);
if (rc)
spi_controller_put(ctlr);
--
2.25.1
From: Suravee Suthikulpanit <[email protected]>
commit f6426ab9c957e97418ac5b0466538792767b1738 upstream.
The function amd_ir_set_vcpu_affinity makes use of the parameter struct
amd_iommu_pi_data.prev_ga_tag to determine if it should delete struct
amd_iommu_pi_data from a list when not running in AVIC mode.
However, prev_ga_tag is initialized only when AVIC is enabled. The non-zero
uninitialized value can cause unintended code path, which ends up making
use of the struct vcpu_svm.ir_list and ir_list_lock without being
initialized (since they are intended only for the AVIC case).
This triggers NULL pointer dereference bug in the function vm_ir_list_del
with the following call trace:
svm_update_pi_irte+0x3c2/0x550 [kvm_amd]
? proc_create_single_data+0x41/0x50
kvm_arch_irq_bypass_add_producer+0x40/0x60 [kvm]
__connect+0x5f/0xb0 [irqbypass]
irq_bypass_register_producer+0xf8/0x120 [irqbypass]
vfio_msi_set_vector_signal+0x1de/0x2d0 [vfio_pci]
vfio_msi_set_block+0x77/0xe0 [vfio_pci]
vfio_pci_set_msi_trigger+0x25c/0x2f0 [vfio_pci]
vfio_pci_set_irqs_ioctl+0x88/0xb0 [vfio_pci]
vfio_pci_ioctl+0x2ea/0xed0 [vfio_pci]
? alloc_file_pseudo+0xa5/0x100
vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
? vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
__x64_sys_ioctl+0x96/0xd0
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Therefore, initialize prev_ga_tag to zero before use. This should be safe
because ga_tag value 0 is invalid (see function avic_vm_init).
Fixes: dfa20099e26e ("KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()")
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/svm/avic.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -868,6 +868,7 @@ int svm_update_pi_irte(struct kvm *kvm,
* - Tell IOMMU to use legacy mode for this interrupt.
* - Retrieve ga_tag of prior interrupt remapping data.
*/
+ pi.prev_ga_tag = 0;
pi.is_guest_mode = false;
ret = irq_set_vcpu_affinity(host_irq, &pi);
From: Lad Prabhakar <[email protected]>
[ Upstream commit 3b987d70e903962eb8c5961ba166c345a49d1a0b ]
Keep the sensor in software power down mode and wake up only in
ov5640_set_stream_dvp() callback.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Tested-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov5640.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index ab19e04720d3a..6e558a7e2d244 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -34,6 +34,8 @@
#define OV5640_REG_SYS_RESET02 0x3002
#define OV5640_REG_SYS_CLOCK_ENABLE02 0x3006
#define OV5640_REG_SYS_CTRL0 0x3008
+#define OV5640_REG_SYS_CTRL0_SW_PWDN 0x42
+#define OV5640_REG_SYS_CTRL0_SW_PWUP 0x02
#define OV5640_REG_CHIP_ID 0x300a
#define OV5640_REG_IO_MIPI_CTRL00 0x300e
#define OV5640_REG_PAD_OUTPUT_ENABLE01 0x3017
@@ -1120,6 +1122,12 @@ static int ov5640_load_regs(struct ov5640_dev *sensor,
val = regs->val;
mask = regs->mask;
+ /* remain in power down mode for DVP */
+ if (regs->reg_addr == OV5640_REG_SYS_CTRL0 &&
+ val == OV5640_REG_SYS_CTRL0_SW_PWUP &&
+ sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
+ continue;
+
if (mask)
ret = ov5640_mod_reg(sensor, reg_addr, mask, val);
else
@@ -1297,9 +1305,14 @@ static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on)
* PAD OUTPUT ENABLE 02
* - [7:2]: D[5:0] output enable
*/
- return ov5640_write_reg(sensor,
- OV5640_REG_PAD_OUTPUT_ENABLE02,
- on ? 0xfc : 0);
+ ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02,
+ on ? 0xfc : 0);
+ if (ret)
+ return ret;
+
+ return ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, on ?
+ OV5640_REG_SYS_CTRL0_SW_PWUP :
+ OV5640_REG_SYS_CTRL0_SW_PWDN);
}
static int ov5640_set_stream_mipi(struct ov5640_dev *sensor, bool on)
--
2.25.1
From: Guenter Roeck <[email protected]>
[ Upstream commit 6c094b31ea2ad773824362ba0fccb88d36f8d32d ]
Starting with MAX34451, the chips of this series support STATUS_IOUT and
STATUS_TEMPERATURE commands, and no longer report over-current and
over-temperature status with STATUS_MFR_SPECIFIC.
Fixes: 7a001dbab4ade ("hwmon: (pmbus/max34440) Add support for MAX34451.")
Fixes: 50115ac9b6f35 ("hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461")
Reported-by: Steve Foreman <[email protected]>
Cc: Steve Foreman <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pmbus/max34440.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index 18b4e071067f7..de04dff28945b 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -388,7 +388,6 @@ static struct pmbus_driver_info max34440_info[] = {
.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
- .read_byte_data = max34440_read_byte_data,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
@@ -419,7 +418,6 @@ static struct pmbus_driver_info max34440_info[] = {
.func[15] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
- .read_byte_data = max34440_read_byte_data,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
@@ -455,7 +453,6 @@ static struct pmbus_driver_info max34440_info[] = {
.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[21] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
- .read_byte_data = max34440_read_byte_data,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
--
2.25.1
From: Ezequiel Garcia <[email protected]>
[ Upstream commit 669ccf19ed2059b9d517664a2dbbf6bde87e1414 ]
When the post-processor is enabled, the driver allocates
"shadow buffers" which are used for the decoder core,
and exposes the post-processed buffers to userspace.
For this reason, extra motion vector space has to
be allocated on the shadow buffers, which the driver
wasn't doing. Fix it.
This fix should address artifacts on high profile bitstreams.
Fixes: 8c2d66b036c77 ("media: hantro: Support color conversion via post-processing")
Signed-off-by: Ezequiel Garcia <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/hantro/hantro_postproc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/hantro/hantro_postproc.c b/drivers/staging/media/hantro/hantro_postproc.c
index 44062ffceaea7..6d2a8f2a8f0bb 100644
--- a/drivers/staging/media/hantro/hantro_postproc.c
+++ b/drivers/staging/media/hantro/hantro_postproc.c
@@ -118,7 +118,9 @@ int hantro_postproc_alloc(struct hantro_ctx *ctx)
unsigned int num_buffers = cap_queue->num_buffers;
unsigned int i, buf_size;
- buf_size = ctx->dst_fmt.plane_fmt[0].sizeimage;
+ buf_size = ctx->dst_fmt.plane_fmt[0].sizeimage +
+ hantro_h264_mv_size(ctx->dst_fmt.width,
+ ctx->dst_fmt.height);
for (i = 0; i < num_buffers; ++i) {
struct hantro_aux_buf *priv = &ctx->postproc.dec_q[i];
--
2.25.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 2cac7cbfb4099980e78244359ab9c6f056d6a7ec ]
v4l2_async_notifier_add_subdev() requires the asd to be allocated
dynamically, but the rcar-csi2 driver embeds it in the rcar_csi2
structure. This causes memory corruption when the notifier is destroyed
at remove time with v4l2_async_notifier_cleanup().
Fix this issue by registering the asd with
v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically
internally.
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 24 +++++++++------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 151e6a90c5fbc..d9bc8cef7db58 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -361,7 +361,6 @@ struct rcar_csi2 {
struct media_pad pads[NR_OF_RCAR_CSI2_PAD];
struct v4l2_async_notifier notifier;
- struct v4l2_async_subdev asd;
struct v4l2_subdev *remote;
struct v4l2_mbus_framefmt mf;
@@ -810,6 +809,8 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
static int rcsi2_parse_dt(struct rcar_csi2 *priv)
{
+ struct v4l2_async_subdev *asd;
+ struct fwnode_handle *fwnode;
struct device_node *ep;
struct v4l2_fwnode_endpoint v4l2_ep = { .bus_type = 0 };
int ret;
@@ -833,24 +834,19 @@ static int rcsi2_parse_dt(struct rcar_csi2 *priv)
return ret;
}
- priv->asd.match.fwnode =
- fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
- priv->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
-
+ fwnode = fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
of_node_put(ep);
- v4l2_async_notifier_init(&priv->notifier);
-
- ret = v4l2_async_notifier_add_subdev(&priv->notifier, &priv->asd);
- if (ret) {
- fwnode_handle_put(priv->asd.match.fwnode);
- return ret;
- }
+ dev_dbg(priv->dev, "Found '%pOF'\n", to_of_node(fwnode));
+ v4l2_async_notifier_init(&priv->notifier);
priv->notifier.ops = &rcar_csi2_notify_ops;
- dev_dbg(priv->dev, "Found '%pOF'\n",
- to_of_node(priv->asd.match.fwnode));
+ asd = v4l2_async_notifier_add_fwnode_subdev(&priv->notifier, fwnode,
+ sizeof(*asd));
+ fwnode_handle_put(fwnode);
+ if (IS_ERR(asd))
+ return PTR_ERR(asd);
ret = v4l2_async_subdev_notifier_register(&priv->subdev,
&priv->notifier);
--
2.25.1
From: Andrei Botila <[email protected]>
commit 62b9a6690926ee199445b23fd46e6349d9057146 upstream.
CAAM accelerator only supports XTS-AES-128 and XTS-AES-256 since
it adheres strictly to the standard. All the other key lengths
are accepted and processed through a fallback as long as they pass
the xts_verify_key() checks.
Fixes: b189817cf789 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Cc: <[email protected]> # v4.12+
Signed-off-by: Andrei Botila <[email protected]>
Reviewed-by: Horia Geantă <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/caam/caamalg_qi.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/crypto/caam/caamalg_qi.c
+++ b/drivers/crypto/caam/caamalg_qi.c
@@ -18,6 +18,7 @@
#include "qi.h"
#include "jr.h"
#include "caamalg_desc.h"
+#include <crypto/xts.h>
#include <asm/unaligned.h>
/*
@@ -68,6 +69,7 @@ struct caam_ctx {
struct device *qidev;
spinlock_t lock; /* Protects multiple init of driver context */
struct caam_drv_ctx *drv_ctx[NUM_OP];
+ bool xts_key_fallback;
struct crypto_skcipher *fallback;
};
@@ -734,11 +736,15 @@ static int xts_skcipher_setkey(struct cr
int ret = 0;
int err;
- if (keylen != 2 * AES_MIN_KEY_SIZE && keylen != 2 * AES_MAX_KEY_SIZE) {
+ err = xts_verify_key(skcipher, key, keylen);
+ if (err) {
dev_dbg(jrdev, "key size mismatch\n");
- return -EINVAL;
+ return err;
}
+ if (keylen != 2 * AES_KEYSIZE_128 && keylen != 2 * AES_KEYSIZE_256)
+ ctx->xts_key_fallback = true;
+
err = crypto_skcipher_setkey(ctx->fallback, key, keylen);
if (err)
return err;
@@ -1402,7 +1408,8 @@ static inline int skcipher_crypt(struct
if (!req->cryptlen)
return 0;
- if (ctx->fallback && xts_skcipher_ivsize(req)) {
+ if (ctx->fallback && (xts_skcipher_ivsize(req) ||
+ ctx->xts_key_fallback)) {
struct caam_skcipher_req_ctx *rctx = skcipher_request_ctx(req);
skcipher_request_set_tfm(&rctx->fallback_req, ctx->fallback);
From: Dinghao Liu <[email protected]>
[ Upstream commit 21d387b8d372f859d9e87fdcc7c3b4a432737f4d ]
When platform_get_irq() fails, we should release
vfd and unregister pcdev->v4l2_dev just like the
subsequent error paths.
Fixes: d4e192cc44914 ("media: mx2_emmaprp: Check for platform_get_irq() error")
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/mx2_emmaprp.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c
index df78df59da456..08a5473b56104 100644
--- a/drivers/media/platform/mx2_emmaprp.c
+++ b/drivers/media/platform/mx2_emmaprp.c
@@ -852,8 +852,11 @@ static int emmaprp_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pcdev);
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto rel_vdev;
+ }
+
ret = devm_request_irq(&pdev->dev, irq, emmaprp_irq, 0,
dev_name(&pdev->dev), pcdev);
if (ret)
--
2.25.1
From: Rohit Maheshwari <[email protected]>
[ Upstream commit ea1dd3e9d080c961b9a451130b61c72dc9a5397b ]
At first when sendpage gets called, if there is more data, 'more' in
tls_push_data() gets set which later sets pending_open_record_frags, but
when there is no more data in file left, and last time tls_push_data()
gets called, pending_open_record_frags doesn't get reset. And later when
2 bytes of encrypted alert comes as sendmsg, it first checks for
pending_open_record_frags, and since this is set, it creates a record with
0 data bytes to encrypt, meaning record length is prepend_size + tag_size
only, which causes problem.
We should set/reset pending_open_record_frags based on more bit.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tls/tls_device.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -418,14 +418,14 @@ static int tls_push_data(struct sock *sk
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_prot_info *prot = &tls_ctx->prot_info;
struct tls_offload_context_tx *ctx = tls_offload_ctx_tx(tls_ctx);
- int more = flags & (MSG_SENDPAGE_NOTLAST | MSG_MORE);
struct tls_record_info *record = ctx->open_record;
int tls_push_record_flags;
struct page_frag *pfrag;
size_t orig_size = size;
u32 max_open_record_len;
- int copy, rc = 0;
+ bool more = false;
bool done = false;
+ int copy, rc = 0;
long timeo;
if (flags &
@@ -492,9 +492,8 @@ handle_error:
if (!size) {
last_record:
tls_push_record_flags = flags;
- if (more) {
- tls_ctx->pending_open_record_frags =
- !!record->num_frags;
+ if (flags & (MSG_SENDPAGE_NOTLAST | MSG_MORE)) {
+ more = true;
break;
}
@@ -526,6 +525,8 @@ last_record:
}
} while (!done);
+ tls_ctx->pending_open_record_frags = more;
+
if (orig_size - size > 0)
rc = orig_size - size;
From: Tianjia Zhang <[email protected]>
[ Upstream commit 8cbde6c6a6d2b1599ff90f932304aab7e32fce89 ]
In case of memory allocation failure, a negative error code should
be returned.
Fixes: 785e5c616c849 ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Cc: Ryder Lee <[email protected]>
Signed-off-by: Tianjia Zhang <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/mediatek/mtk-platform.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/mediatek/mtk-platform.c b/drivers/crypto/mediatek/mtk-platform.c
index 7e3ad085b5bdd..ef4339e84d034 100644
--- a/drivers/crypto/mediatek/mtk-platform.c
+++ b/drivers/crypto/mediatek/mtk-platform.c
@@ -442,7 +442,7 @@ static void mtk_desc_dma_free(struct mtk_cryp *cryp)
static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
{
struct mtk_ring **ring = cryp->ring;
- int i, err = ENOMEM;
+ int i;
for (i = 0; i < MTK_RING_MAX; i++) {
ring[i] = kzalloc(sizeof(**ring), GFP_KERNEL);
@@ -476,7 +476,7 @@ static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
ring[i]->cmd_base, ring[i]->cmd_dma);
kfree(ring[i]);
}
- return err;
+ return -ENOMEM;
}
static int mtk_crypto_probe(struct platform_device *pdev)
--
2.25.1
From: Wilken Gottwalt <[email protected]>
[ Upstream commit 28802e7c0c9954218d1830f7507edc9d49b03a00 ]
Add usb ids of the Cellient MPL200 card.
Signed-off-by: Wilken Gottwalt <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1375,6 +1375,7 @@ static const struct usb_device_id produc
{QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)}, /* Fibocom NL678 series */
{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */
{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)}, /* Foxconn T77W968 LTE with eSIM support*/
+ {QMI_FIXED_INTF(0x2692, 0x9025, 4)}, /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */
/* 4. Gobi 1000 devices */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
From: Marek Vasut <[email protected]>
[ Upstream commit 64a632da538a6827fad0ea461925cedb9899ebe2 ]
The phy_reset_after_clk_enable() is always called with ndev->phydev,
however that pointer may be NULL even though the PHY device instance
already exists and is sufficient to perform the PHY reset.
This condition happens in fec_open(), where the clock must be enabled
first, then the PHY must be reset, and then the PHY IDs can be read
out of the PHY.
If the PHY still is not bound to the MAC, but there is OF PHY node
and a matching PHY device instance already, use the OF PHY node to
obtain the PHY device instance, and then use that PHY device instance
when triggering the PHY reset.
Fixes: 1b0a83ac04e3 ("net: fec: add phy_reset_after_clk_enable() support")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Christoph Niedermaier <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Richard Leitner <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/fec_main.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1913,6 +1913,27 @@ out:
return ret;
}
+static void fec_enet_phy_reset_after_clk_enable(struct net_device *ndev)
+{
+ struct fec_enet_private *fep = netdev_priv(ndev);
+ struct phy_device *phy_dev = ndev->phydev;
+
+ if (phy_dev) {
+ phy_reset_after_clk_enable(phy_dev);
+ } else if (fep->phy_node) {
+ /*
+ * If the PHY still is not bound to the MAC, but there is
+ * OF PHY node and a matching PHY device instance already,
+ * use the OF PHY node to obtain the PHY device instance,
+ * and then use that PHY device instance when triggering
+ * the PHY reset.
+ */
+ phy_dev = of_phy_find_device(fep->phy_node);
+ phy_reset_after_clk_enable(phy_dev);
+ put_device(&phy_dev->mdio.dev);
+ }
+}
+
static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
{
struct fec_enet_private *fep = netdev_priv(ndev);
@@ -1939,7 +1960,7 @@ static int fec_enet_clk_enable(struct ne
if (ret)
goto failed_clk_ref;
- phy_reset_after_clk_enable(ndev->phydev);
+ fec_enet_phy_reset_after_clk_enable(ndev);
} else {
clk_disable_unprepare(fep->clk_enet_out);
if (fep->clk_ptp) {
@@ -2994,7 +3015,7 @@ fec_enet_open(struct net_device *ndev)
* phy_reset_after_clk_enable() before because the PHY wasn't probed.
*/
if (reset_again)
- phy_reset_after_clk_enable(ndev->phydev);
+ fec_enet_phy_reset_after_clk_enable(ndev);
if (fep->quirks & FEC_QUIRK_ERR006687)
imx6q_cpuidle_fec_irqs_used();
From: Po-Hsu Lin <[email protected]>
[ Upstream commit 26ebd6fed9bb3aa480c7c0f147ac0e7b11000f65 ]
The kci_test_encap_fou() test from kci_test_encap() in rtnetlink.sh
needs the fou module to work. Otherwise it will fail with:
$ ip netns exec "$testns" ip fou add port 7777 ipproto 47
RTNETLINK answers: No such file or directory
Error talking to the kernel
Add the CONFIG_NET_FOU into the config file as well. Which needs at
least to be set as a loadable module.
Fixes: 6227efc1a20b ("selftests: rtnetlink.sh: add vxlan and fou test cases")
Signed-off-by: Po-Hsu Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/net/config | 1 +
tools/testing/selftests/net/rtnetlink.sh | 5 +++++
2 files changed, 6 insertions(+)
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -31,3 +31,4 @@ CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_NETEM=y
CONFIG_TEST_BLACKHOLE_DEV=m
CONFIG_KALLSYMS=y
+CONFIG_NET_FOU=m
--- a/tools/testing/selftests/net/rtnetlink.sh
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -521,6 +521,11 @@ kci_test_encap_fou()
return $ksft_skip
fi
+ if ! /sbin/modprobe -q -n fou; then
+ echo "SKIP: module fou is not found"
+ return $ksft_skip
+ fi
+ /sbin/modprobe -q fou
ip -netns "$testns" fou add port 7777 ipproto 47 2>/dev/null
if [ $? -ne 0 ];then
echo "FAIL: can't add fou port 7777, skipping test"
From: Jeremy Szu <[email protected]>
commit 148ebf548a1af366fc797fcc7d03f0bb92b12a79 upstream.
On a HP ZCentral, the front Mic could not be detected.
The codec of the HP ZCentrol is alc671 and it needs to override the pin
configuration to enable the headset mic.
Signed-off-by: Jeremy Szu <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9635,6 +9635,7 @@ static const struct snd_pci_quirk alc662
SND_PCI_QUIRK(0x1028, 0x0698, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
+ SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2),
SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),
SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50),
SND_PCI_QUIRK(0x1043, 0x13df, "Asus N550JX", ALC662_FIXUP_BASS_1A),
From: "Maciej Żenczykowski" <[email protected]>
[ Upstream commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0 ]
Documentation/networking/ip-sysctl.txt:46 says:
ip_forward_use_pmtu - BOOLEAN
By default we don't trust protocol path MTUs while forwarding
because they could be easily forged and can lead to unwanted
fragmentation by the router.
You only need to enable this if you have user-space software
which tries to discover path mtus by itself and depends on the
kernel honoring this information. This is normally not the case.
Default: 0 (disabled)
Possible values:
0 - disabled
1 - enabled
Which makes it pretty clear that setting it to 1 is a potential
security/safety/DoS issue, and yet it is entirely reasonable to want
forwarded traffic to honour explicitly administrator configured
route mtus (instead of defaulting to device mtu).
Indeed, I can't think of a single reason why you wouldn't want to.
Since you configured a route mtu you probably know better...
It is pretty common to have a higher device mtu to allow receiving
large (jumbo) frames, while having some routes via that interface
(potentially including the default route to the internet) specify
a lower mtu.
Note that ipv6 forwarding uses device mtu unless the route is locked
(in which case it will use the route mtu).
This approach is not usable for IPv4 where an 'mtu lock' on a route
also has the side effect of disabling TCP path mtu discovery via
disabling the IPv4 DF (don't frag) bit on all outgoing frames.
I'm not aware of a way to lock a route from an IPv6 RA, so that also
potentially seems wrong.
Signed-off-by: Maciej Żenczykowski <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Lorenzo Colitti <[email protected]>
Cc: Sunmeet Gill (Sunny) <[email protected]>
Cc: Vinay Paradkar <[email protected]>
Cc: Tyler Wear <[email protected]>
Cc: David Ahern <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/ip.h | 6 ++++++
1 file changed, 6 insertions(+)
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -439,12 +439,18 @@ static inline unsigned int ip_dst_mtu_ma
bool forwarding)
{
struct net *net = dev_net(dst->dev);
+ unsigned int mtu;
if (net->ipv4.sysctl_ip_fwd_use_pmtu ||
ip_mtu_locked(dst) ||
!forwarding)
return dst_mtu(dst);
+ /* 'forwarding = true' case should always honour route mtu */
+ mtu = dst_metric_raw(dst, RTAX_MTU);
+ if (mtu)
+ return mtu;
+
return min(READ_ONCE(dst->dev->mtu), IP_MAX_MTU);
}
From: Jonathan Lemon <[email protected]>
[ Upstream commit b2b8a92733b288128feb57ffa694758cf475106c ]
netcons calls napi_poll with a budget of 0 to transmit packets.
Handle this by:
- skipping RX processing
- do not try to recycle TX packets to the RX cache
Signed-off-by: Jonathan Lemon <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 3 +++
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +-
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -943,6 +943,9 @@ int mlx4_en_poll_rx_cq(struct napi_struc
bool clean_complete = true;
int done;
+ if (!budget)
+ return 0;
+
if (priv->tx_ring_num[TX_XDP]) {
xdp_tx_cq = priv->tx_cq[TX_XDP][cq->ring];
if (xdp_tx_cq->xdp_busy) {
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -350,7 +350,7 @@ u32 mlx4_en_recycle_tx_desc(struct mlx4_
.dma = tx_info->map0_dma,
};
- if (!mlx4_en_rx_recycle(ring->recycle_ring, &frame)) {
+ if (!napi_mode || !mlx4_en_rx_recycle(ring->recycle_ring, &frame)) {
dma_unmap_page(priv->ddev, tx_info->map0_dma,
PAGE_SIZE, priv->dma_dir);
put_page(tx_info->page);
From: Shyam Prasad N <[email protected]>
commit 0bd294b55a5de442370c29fa53bab17aef3ff318 upstream.
In crypt_message, when smb2_get_enc_key returns error, we need to
return the error back to the caller. If not, we end up processing
the message further, causing a kernel oops due to unwarranted access
of memory.
Call Trace:
smb3_receive_transform+0x120/0x870 [cifs]
cifs_demultiplex_thread+0xb53/0xc20 [cifs]
? cifs_handle_standard+0x190/0x190 [cifs]
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30
Signed-off-by: Shyam Prasad N <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -3924,7 +3924,7 @@ crypt_message(struct TCP_Server_Info *se
if (rc) {
cifs_server_dbg(VFS, "%s: Could not get %scryption key\n", __func__,
enc ? "en" : "de");
- return 0;
+ return rc;
}
rc = smb3_crypto_aead_allocate(server);
From: Xie He <[email protected]>
[ Upstream commit 5fce1e43e2d5bf2f7e3224d7b99b1c65ab2c26e2 ]
This driver calls ether_setup to set up the network device.
The ether_setup function would add the IFF_TX_SKB_SHARING flag to the
device. This flag indicates that it is safe to transmit shared skbs to
the device.
However, this is not true. This driver may pad the frame (in eth_tx)
before transmission, so the skb may be modified.
Fixes: 550fd08c2ceb ("net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared")
Cc: Neil Horman <[email protected]>
Cc: Krzysztof Halasa <[email protected]>
Signed-off-by: Xie He <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wan/hdlc_raw_eth.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wan/hdlc_raw_eth.c
+++ b/drivers/net/wan/hdlc_raw_eth.c
@@ -99,6 +99,7 @@ static int raw_eth_ioctl(struct net_devi
old_qlen = dev->tx_queue_len;
ether_setup(dev);
dev->tx_queue_len = old_qlen;
+ dev->priv_flags &= ~IFF_TX_SKB_SHARING;
eth_hw_addr_random(dev);
call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
netif_dormant_off(dev);
From: Steve French <[email protected]>
commit 3c3317daef0afa0cd541fc9c1bfd6ce8bbf1129a upstream.
When mounting with modefromsid mount option, it was possible to
get the error on stat of a fifo or char or block device:
"cannot stat <filename>: Operation not supported"
Special devices can be stored as reparse points by some servers
(e.g. Windows NFS server and when using the SMB3.1.1 POSIX
Extensions) but when the modefromsid mount option is used
the client attempts to get the ACL for the file which requires
opening with OPEN_REPARSE_POINT create option.
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -3072,7 +3072,12 @@ get_smb2_acl_by_path(struct cifs_sb_info
oparms.tcon = tcon;
oparms.desired_access = READ_CONTROL;
oparms.disposition = FILE_OPEN;
- oparms.create_options = cifs_create_options(cifs_sb, 0);
+ /*
+ * When querying an ACL, even if the file is a symlink we want to open
+ * the source not the target, and so the protocol requires that the
+ * client specify this flag when opening a reparse point
+ */
+ oparms.create_options = cifs_create_options(cifs_sb, 0) | OPEN_REPARSE_POINT;
oparms.fid = &fid;
oparms.reconnect = false;
From: Steve French <[email protected]>
commit 9934430e2178d5164eb1ac91a9b092f9e7e64745 upstream.
We were setting the uid/gid to the default in each dir entry
in the parsing of the POSIX query dir response, rather
than attempting to map the user and group SIDs returned by
the server to well known SIDs (or upcall if not found).
CC: Stable <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifsacl.c | 5 +++--
fs/cifs/cifsproto.h | 2 ++
fs/cifs/readdir.c | 5 ++---
3 files changed, 7 insertions(+), 5 deletions(-)
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -338,7 +338,7 @@ invalidate_key:
goto out_key_put;
}
-static int
+int
sid_to_id(struct cifs_sb_info *cifs_sb, struct cifs_sid *psid,
struct cifs_fattr *fattr, uint sidtype)
{
@@ -359,7 +359,8 @@ sid_to_id(struct cifs_sb_info *cifs_sb,
return -EIO;
}
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UID_FROM_ACL) {
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UID_FROM_ACL) ||
+ (cifs_sb_master_tcon(cifs_sb)->posix_extensions)) {
uint32_t unix_id;
bool is_group;
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -208,6 +208,8 @@ extern int cifs_set_file_info(struct ino
extern int cifs_rename_pending_delete(const char *full_path,
struct dentry *dentry,
const unsigned int xid);
+extern int sid_to_id(struct cifs_sb_info *cifs_sb, struct cifs_sid *psid,
+ struct cifs_fattr *fattr, uint sidtype);
extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
struct cifs_fattr *fattr, struct inode *inode,
bool get_mode_from_special_sid,
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -267,9 +267,8 @@ cifs_posix_to_fattr(struct cifs_fattr *f
if (reparse_file_needs_reval(fattr))
fattr->cf_flags |= CIFS_FATTR_NEED_REVAL;
- /* TODO map SIDs */
- fattr->cf_uid = cifs_sb->mnt_uid;
- fattr->cf_gid = cifs_sb->mnt_gid;
+ sid_to_id(cifs_sb, &parsed.owner, fattr, SIDOWNER);
+ sid_to_id(cifs_sb, &parsed.group, fattr, SIDGROUP);
}
static void __dir_info_to_fattr(struct cifs_fattr *fattr, const void *info)
From: Sean Christopherson <[email protected]>
commit 25bb2cf97139f81e3bb8910d26016a529019528e upstream.
On successful nested VM-Enter, check for pending interrupts and convert
the highest priority interrupt to a pending posted interrupt if it
matches L2's notification vector. If the vCPU receives a notification
interrupt before nested VM-Enter (assuming L1 disables IRQs before doing
VM-Enter), the pending interrupt (for L1) should be recognized and
processed as a posted interrupt when interrupts become unblocked after
VM-Enter to L2.
This fixes a bug where L1/L2 will get stuck in an infinite loop if L1 is
trying to inject an interrupt into L2 by setting the appropriate bit in
L2's PIR and sending a self-IPI prior to VM-Enter (as opposed to KVM's
method of manually moving the vector from PIR->vIRR/RVI). KVM will
observe the IPI while the vCPU is in L1 context and so won't immediately
morph it to a posted interrupt for L2. The pending interrupt will be
seen by vmx_check_nested_events(), cause KVM to force an immediate exit
after nested VM-Enter, and eventually be reflected to L1 as a VM-Exit.
After handling the VM-Exit, L1 will see that L2 has a pending interrupt
in PIR, send another IPI, and repeat until L2 is killed.
Note, posted interrupts require virtual interrupt deliveriy, and virtual
interrupt delivery requires exit-on-interrupt, ergo interrupts will be
unconditionally unmasked on VM-Enter if posted interrupts are enabled.
Fixes: 705699a13994 ("KVM: nVMX: Enable nested posted interrupt processing")
Cc: [email protected]
Cc: Liran Alon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 7 +++++++
arch/x86/kvm/lapic.h | 1 +
arch/x86/kvm/vmx/nested.c | 8 ++++++++
3 files changed, 16 insertions(+)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -490,6 +490,12 @@ static inline void apic_clear_irr(int ve
}
}
+void kvm_apic_clear_irr(struct kvm_vcpu *vcpu, int vec)
+{
+ apic_clear_irr(vec, vcpu->arch.apic);
+}
+EXPORT_SYMBOL_GPL(kvm_apic_clear_irr);
+
static inline void apic_set_isr(int vec, struct kvm_lapic *apic)
{
struct kvm_vcpu *vcpu;
@@ -2462,6 +2468,7 @@ int kvm_apic_has_interrupt(struct kvm_vc
__apic_update_ppr(apic, &ppr);
return apic_has_interrupt_for_ppr(apic, ppr);
}
+EXPORT_SYMBOL_GPL(kvm_apic_has_interrupt);
int kvm_apic_accept_pic_intr(struct kvm_vcpu *vcpu)
{
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -89,6 +89,7 @@ int kvm_lapic_reg_read(struct kvm_lapic
bool kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
int shorthand, unsigned int dest, int dest_mode);
int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2);
+void kvm_apic_clear_irr(struct kvm_vcpu *vcpu, int vec);
bool __kvm_apic_update_irr(u32 *pir, void *regs, int *max_irr);
bool kvm_apic_update_irr(struct kvm_vcpu *vcpu, u32 *pir, int *max_irr);
void kvm_apic_update_ppr(struct kvm_vcpu *vcpu);
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -3480,6 +3480,14 @@ static int nested_vmx_run(struct kvm_vcp
if (unlikely(status != NVMX_VMENTRY_SUCCESS))
goto vmentry_failed;
+ /* Emulate processing of posted interrupts on VM-Enter. */
+ if (nested_cpu_has_posted_intr(vmcs12) &&
+ kvm_apic_has_interrupt(vcpu) == vmx->nested.posted_intr_nv) {
+ vmx->nested.pi_pending = true;
+ kvm_make_request(KVM_REQ_EVENT, vcpu);
+ kvm_apic_clear_irr(vcpu, vmx->nested.posted_intr_nv);
+ }
+
/* Hide L1D cache contents from the nested guest. */
vmx->vcpu.arch.l1tf_flush_l1d = true;
From: Marc Zyngier <[email protected]>
commit b11483ef5a502663732c6ca1b58d14ff9eedd6f7 upstream.
We seem to be pretending that we don't have any firmware mitigation
when KVM is not compiled in, which is not quite expected.
Bring back the mitigation in this case.
Fixes: 4db61fef16a1 ("arm64: kvm: Modernize __smccc_workaround_1_smc_start annotations")
Cc: <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/cpu_errata.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -234,14 +234,17 @@ static int detect_harden_bp_fw(void)
smccc_end = NULL;
break;
-#if IS_ENABLED(CONFIG_KVM)
case SMCCC_CONDUIT_SMC:
cb = call_smc_arch_workaround_1;
+#if IS_ENABLED(CONFIG_KVM)
smccc_start = __smccc_workaround_1_smc;
smccc_end = __smccc_workaround_1_smc +
__SMCCC_WORKAROUND_1_SMC_SZ;
- break;
+#else
+ smccc_start = NULL;
+ smccc_end = NULL;
#endif
+ break;
default:
return -1;
From: Ke Li <[email protected]>
[ Upstream commit 700465fd338fe5df08a1b2e27fa16981f562547f ]
In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate,
after extended from 'u32' to 'unsigned long', takes unintentionally
hiked value whenever assigned from an 'int' value with MSB=1, due to
binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes
0xFFFFFFFF80000000.
Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return
~0U unexpectedly. It may also result in increased pacing rate.
Fix by explicitly casting the 'int' value to 'unsigned int' before
assigning it to sk_max_pacing_rate, for zero extension to happen.
Fixes: 76a9ebe811fb ("net: extend sk_pacing_rate to unsigned long")
Signed-off-by: Ji Li <[email protected]>
Signed-off-by: Ke Li <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/filter.c | 3 ++-
net/core/sock.c | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4323,7 +4323,8 @@ static int _bpf_setsockopt(struct sock *
cmpxchg(&sk->sk_pacing_status,
SK_PACING_NONE,
SK_PACING_NEEDED);
- sk->sk_max_pacing_rate = (val == ~0U) ? ~0UL : val;
+ sk->sk_max_pacing_rate = (val == ~0U) ?
+ ~0UL : (unsigned int)val;
sk->sk_pacing_rate = min(sk->sk_pacing_rate,
sk->sk_max_pacing_rate);
break;
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1184,7 +1184,7 @@ set_sndbuf:
case SO_MAX_PACING_RATE:
{
- unsigned long ulval = (val == ~0U) ? ~0UL : val;
+ unsigned long ulval = (val == ~0U) ? ~0UL : (unsigned int)val;
if (sizeof(ulval) != sizeof(val) &&
optlen >= sizeof(ulval) &&
From: Ido Schimmel <[email protected]>
[ Upstream commit df6afe2f7c19349de2ee560dc62ea4d9ad3ff889 ]
While insertion of 16k nexthops all using the same netdev ('dummy10')
takes less than a second, deletion takes about 130 seconds:
# time -p ip -b nexthop.batch
real 0.29
user 0.01
sys 0.15
# time -p ip link set dev dummy10 down
real 131.03
user 0.06
sys 0.52
This is because of repeated calls to synchronize_rcu() whenever a
nexthop is removed from a nexthop group:
# /usr/share/bcc/tools/offcputime -p `pgrep -nx ip` -K
...
b'finish_task_switch'
b'schedule'
b'schedule_timeout'
b'wait_for_completion'
b'__wait_rcu_gp'
b'synchronize_rcu.part.0'
b'synchronize_rcu'
b'__remove_nexthop'
b'remove_nexthop'
b'nexthop_flush_dev'
b'nh_netdev_event'
b'raw_notifier_call_chain'
b'call_netdevice_notifiers_info'
b'__dev_notify_flags'
b'dev_change_flags'
b'do_setlink'
b'__rtnl_newlink'
b'rtnl_newlink'
b'rtnetlink_rcv_msg'
b'netlink_rcv_skb'
b'rtnetlink_rcv'
b'netlink_unicast'
b'netlink_sendmsg'
b'____sys_sendmsg'
b'___sys_sendmsg'
b'__sys_sendmsg'
b'__x64_sys_sendmsg'
b'do_syscall_64'
b'entry_SYSCALL_64_after_hwframe'
- ip (277)
126554955
Since nexthops are always deleted under RTNL, synchronize_net() can be
used instead. It will call synchronize_rcu_expedited() which only blocks
for several microseconds as opposed to multiple milliseconds like
synchronize_rcu().
With this patch deletion of 16k nexthops takes less than a second:
# time -p ip link set dev dummy10 down
real 0.12
user 0.00
sys 0.04
Tested with fib_nexthops.sh which includes torture tests that prompted
the initial change:
# ./fib_nexthops.sh
...
Tests passed: 134
Tests failed: 0
Fixes: 90f33bffa382 ("nexthops: don't modify published nexthop groups")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/nexthop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -842,7 +842,7 @@ static void remove_nexthop_from_groups(s
remove_nh_grp_entry(net, nhge, nlinfo);
/* make sure all see the newly published array before releasing rtnl */
- synchronize_rcu();
+ synchronize_net();
}
static void remove_nexthop_group(struct nexthop *nh, struct nl_info *nlinfo)
From: Defang Bo <[email protected]>
[ Upstream commit 280e3ebdafb863b3cb50d5842f056267e15bf40c ]
Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by
the netlink client prior to accessing them.This prevents potential
unhandled NULL pointer dereference exceptions which can be triggered
by malicious user-mode programs, if they omit one or both of these
attributes.
Similar to commit a0323b979f81 ("nfc: Ensure presence of required attributes in the activate_target handler").
Fixes: 9674da8759df ("NFC: Add firmware upload netlink command")
Signed-off-by: Defang Bo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/netlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1217,7 +1217,7 @@ static int nfc_genl_fw_download(struct s
u32 idx;
char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
- if (!info->attrs[NFC_ATTR_DEVICE_INDEX])
+ if (!info->attrs[NFC_ATTR_DEVICE_INDEX] || !info->attrs[NFC_ATTR_FIRMWARE_NAME])
return -EINVAL;
idx = nla_get_u32(info->attrs[NFC_ATTR_DEVICE_INDEX]);
From: Heiner Kallweit <[email protected]>
[ Upstream commit 424a646e072a887aa87283b53aa6f8b19c2a7bef ]
For several network drivers it was reported that using
__napi_schedule_irqoff() is unsafe with forced threading. One way to
fix this is switching back to __napi_schedule, but then we lose the
benefit of the irqoff version in general. As stated by Eric it doesn't
make sense to make the minimal hard irq handlers in drivers using NAPI
a thread. Therefore ensure that the hard irq handler is never
thread-ified.
Fixes: 9a899a35b0d6 ("r8169: switch to napi_schedule_irqoff")
Link: https://lkml.org/lkml/2020/10/18/19
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/realtek/r8169_main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4675,7 +4675,7 @@ static int rtl8169_close(struct net_devi
phy_disconnect(tp->phydev);
- pci_free_irq(pdev, 0, tp);
+ free_irq(pci_irq_vector(pdev, 0), tp);
dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
tp->RxPhyAddr);
@@ -4726,8 +4726,8 @@ static int rtl_open(struct net_device *d
rtl_request_firmware(tp);
- retval = pci_request_irq(pdev, 0, rtl8169_interrupt, NULL, tp,
- dev->name);
+ retval = request_irq(pci_irq_vector(pdev, 0), rtl8169_interrupt,
+ IRQF_NO_THREAD | IRQF_SHARED, dev->name, tp);
if (retval < 0)
goto err_release_fw_2;
@@ -4759,7 +4759,7 @@ out:
return retval;
err_free_irq:
- pci_free_irq(pdev, 0, tp);
+ free_irq(pci_irq_vector(pdev, 0), tp);
err_release_fw_2:
rtl_release_firmware(tp);
rtl8169_rx_clear(tp);
From: Ido Schimmel <[email protected]>
[ Upstream commit 71a0e29e99405d89b695882d52eec60844173697 ]
When 'rp_filter' is configured in strict mode (1) the tests fail because
packets received from the macvlan netdevs would not be forwarded through
them on the reverse path.
Fix this by disabling the 'rp_filter', meaning no source validation is
performed.
Fixes: 1538812e0880 ("selftests: forwarding: Add a test for VXLAN asymmetric routing")
Fixes: 438a4f5665b2 ("selftests: forwarding: Add a test for VXLAN symmetric routing")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Hangbin Liu <[email protected]>
Tested-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh | 10 ++++++++++
tools/testing/selftests/net/forwarding/vxlan_symmetric.sh | 10 ++++++++++
2 files changed, 20 insertions(+)
--- a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
@@ -215,10 +215,16 @@ switch_create()
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+ sysctl_set net.ipv4.conf.all.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
}
switch_destroy()
{
+ sysctl_restore net.ipv4.conf.all.rp_filter
+
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
@@ -359,6 +365,10 @@ ns_switch_create()
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+ sysctl_set net.ipv4.conf.all.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
}
export -f ns_switch_create
--- a/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
@@ -237,10 +237,16 @@ switch_create()
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+ sysctl_set net.ipv4.conf.all.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
}
switch_destroy()
{
+ sysctl_restore net.ipv4.conf.all.rp_filter
+
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
@@ -402,6 +408,10 @@ ns_switch_create()
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+ sysctl_set net.ipv4.conf.all.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+ sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
}
export -f ns_switch_create
From: Roberto Sassu <[email protected]>
commit 60386b854008adc951c470067f90a2d85b5d520f upstream.
Errors returned by crypto_shash_update() are not checked in
ima_calc_boot_aggregate_tfm() and thus can be overwritten at the next
iteration of the loop. This patch adds a check after calling
crypto_shash_update() and returns immediately if the result is not zero.
Cc: [email protected]
Fixes: 3323eec921efd ("integrity: IMA as an integrity service provider")
Signed-off-by: Roberto Sassu <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/integrity/ima/ima_crypto.c | 2 ++
1 file changed, 2 insertions(+)
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -829,6 +829,8 @@ static int ima_calc_boot_aggregate_tfm(c
/* now accumulate with current aggregate */
rc = crypto_shash_update(shash, d.digest,
crypto_shash_digestsize(tfm));
+ if (rc != 0)
+ return rc;
}
/*
* Extend cumulative digest over TPM registers 8-9, which contain
From: Amit Daniel Kachhap <[email protected]>
[ Upstream commit 93396936ed0ce2c6f44140bd14728611d0bb065e ]
Currently the ARMv8.3-PAuth combined branch instructions (braa, retaa
etc.) are not simulated for out-of-line execution with a handler. Hence the
uprobe of such instructions leads to kernel warnings in a loop as they are
not explicitly checked and fall into INSN_GOOD categories. Other combined
instructions like LDRAA and LDRBB can be probed.
The issue of the combined branch instructions is fixed by adding
group definitions of all such instructions and rejecting their probes.
The instruction groups added are br_auth(braa, brab, braaz and brabz),
blr_auth(blraa, blrab, blraaz and blrabz), ret_auth(retaa and retab) and
eret_auth(eretaa and eretab).
Warning log:
WARNING: CPU: 0 PID: 156 at arch/arm64/kernel/probes/uprobes.c:182 uprobe_single_step_handler+0x34/0x50
Modules linked in:
CPU: 0 PID: 156 Comm: func Not tainted 5.9.0-rc3 #188
Hardware name: Foundation-v8A (DT)
pstate: 804003c9 (Nzcv DAIF +PAN -UAO BTYPE=--)
pc : uprobe_single_step_handler+0x34/0x50
lr : single_step_handler+0x70/0xf8
sp : ffff800012af3e30
x29: ffff800012af3e30 x28: ffff000878723b00
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000000
x23: 0000000060001000 x22: 00000000cb000022
x21: ffff800012065ce8 x20: ffff800012af3ec0
x19: ffff800012068d50 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : ffff800010085c90 x8 : 0000000000000000
x7 : 0000000000000000 x6 : ffff80001205a9c8
x5 : ffff80001205a000 x4 : ffff80001233db80
x3 : ffff8000100a7a60 x2 : 0020000000000003
x1 : 0000fffffffff008 x0 : ffff800012af3ec0
Call trace:
uprobe_single_step_handler+0x34/0x50
single_step_handler+0x70/0xf8
do_debug_exception+0xb8/0x130
el0_sync_handler+0x138/0x1b8
el0_sync+0x158/0x180
Fixes: 74afda4016a7 ("arm64: compile the kernel with ptrauth return address signing")
Fixes: 04ca3204fa09 ("arm64: enable pointer authentication")
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Reviewed-by: Dave Martin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/insn.h | 4 ++++
arch/arm64/kernel/insn.c | 5 ++++-
arch/arm64/kernel/probes/decode-insn.c | 3 ++-
3 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h
index 0bc46149e4917..4b39293d0f72d 100644
--- a/arch/arm64/include/asm/insn.h
+++ b/arch/arm64/include/asm/insn.h
@@ -359,9 +359,13 @@ __AARCH64_INSN_FUNCS(brk, 0xFFE0001F, 0xD4200000)
__AARCH64_INSN_FUNCS(exception, 0xFF000000, 0xD4000000)
__AARCH64_INSN_FUNCS(hint, 0xFFFFF01F, 0xD503201F)
__AARCH64_INSN_FUNCS(br, 0xFFFFFC1F, 0xD61F0000)
+__AARCH64_INSN_FUNCS(br_auth, 0xFEFFF800, 0xD61F0800)
__AARCH64_INSN_FUNCS(blr, 0xFFFFFC1F, 0xD63F0000)
+__AARCH64_INSN_FUNCS(blr_auth, 0xFEFFF800, 0xD63F0800)
__AARCH64_INSN_FUNCS(ret, 0xFFFFFC1F, 0xD65F0000)
+__AARCH64_INSN_FUNCS(ret_auth, 0xFFFFFBFF, 0xD65F0BFF)
__AARCH64_INSN_FUNCS(eret, 0xFFFFFFFF, 0xD69F03E0)
+__AARCH64_INSN_FUNCS(eret_auth, 0xFFFFFBFF, 0xD69F0BFF)
__AARCH64_INSN_FUNCS(mrs, 0xFFF00000, 0xD5300000)
__AARCH64_INSN_FUNCS(msr_imm, 0xFFF8F01F, 0xD500401F)
__AARCH64_INSN_FUNCS(msr_reg, 0xFFF00000, 0xD5100000)
diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index a107375005bc9..ccc8c9e22b258 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -176,7 +176,7 @@ bool __kprobes aarch64_insn_uses_literal(u32 insn)
bool __kprobes aarch64_insn_is_branch(u32 insn)
{
- /* b, bl, cb*, tb*, b.cond, br, blr */
+ /* b, bl, cb*, tb*, ret*, b.cond, br*, blr* */
return aarch64_insn_is_b(insn) ||
aarch64_insn_is_bl(insn) ||
@@ -185,8 +185,11 @@ bool __kprobes aarch64_insn_is_branch(u32 insn)
aarch64_insn_is_tbz(insn) ||
aarch64_insn_is_tbnz(insn) ||
aarch64_insn_is_ret(insn) ||
+ aarch64_insn_is_ret_auth(insn) ||
aarch64_insn_is_br(insn) ||
+ aarch64_insn_is_br_auth(insn) ||
aarch64_insn_is_blr(insn) ||
+ aarch64_insn_is_blr_auth(insn) ||
aarch64_insn_is_bcond(insn);
}
diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
index 263d5fba4c8a3..c541fb48886e3 100644
--- a/arch/arm64/kernel/probes/decode-insn.c
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -29,7 +29,8 @@ static bool __kprobes aarch64_insn_is_steppable(u32 insn)
aarch64_insn_is_msr_imm(insn) ||
aarch64_insn_is_msr_reg(insn) ||
aarch64_insn_is_exception(insn) ||
- aarch64_insn_is_eret(insn))
+ aarch64_insn_is_eret(insn) ||
+ aarch64_insn_is_eret_auth(insn))
return false;
/*
--
2.25.1
From: Arvind Sankar <[email protected]>
[ Upstream commit 0a4bb5e5507a585532cc413125b921c8546fc39f ]
Commit
0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
changed clearcpuid parsing from __setup() to cmdline_find_option().
While the __setup() function would have been called for each clearcpuid=
parameter on the command line, cmdline_find_option() will only return
the last one, so the change effectively made it impossible to disable
more than one bit.
Allow a comma-separated list of bit numbers as the argument for
clearcpuid to allow multiple bits to be disabled again. Log the bits
being disabled for informational purposes.
Also fix the check on the return value of cmdline_find_option(). It
returns -1 when the option is not found, so testing as a boolean is
incorrect.
Fixes: 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
Signed-off-by: Arvind Sankar <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../admin-guide/kernel-parameters.txt | 2 +-
arch/x86/kernel/fpu/init.c | 30 ++++++++++++++-----
2 files changed, 23 insertions(+), 9 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index fb95fad81c79a..6746f91ebc490 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -577,7 +577,7 @@
loops can be debugged more effectively on production
systems.
- clearcpuid=BITNUM [X86]
+ clearcpuid=BITNUM[,BITNUM...] [X86]
Disable CPUID feature X for the kernel. See
arch/x86/include/asm/cpufeatures.h for the valid bit
numbers. Note the Linux specific bits are not necessarily
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 61ddc3a5e5c2b..f8ff895aaf7e1 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -243,9 +243,9 @@ static void __init fpu__init_system_ctx_switch(void)
*/
static void __init fpu__init_parse_early_param(void)
{
- char arg[32];
+ char arg[128];
char *argptr = arg;
- int bit;
+ int arglen, res, bit;
#ifdef CONFIG_X86_32
if (cmdline_find_option_bool(boot_command_line, "no387"))
@@ -268,12 +268,26 @@ static void __init fpu__init_parse_early_param(void)
if (cmdline_find_option_bool(boot_command_line, "noxsaves"))
setup_clear_cpu_cap(X86_FEATURE_XSAVES);
- if (cmdline_find_option(boot_command_line, "clearcpuid", arg,
- sizeof(arg)) &&
- get_option(&argptr, &bit) &&
- bit >= 0 &&
- bit < NCAPINTS * 32)
- setup_clear_cpu_cap(bit);
+ arglen = cmdline_find_option(boot_command_line, "clearcpuid", arg, sizeof(arg));
+ if (arglen <= 0)
+ return;
+
+ pr_info("Clearing CPUID bits:");
+ do {
+ res = get_option(&argptr, &bit);
+ if (res == 0 || res == 3)
+ break;
+
+ /* If the argument was too long, the last bit may be cut off */
+ if (res == 1 && arglen >= sizeof(arg))
+ break;
+
+ if (bit >= 0 && bit < NCAPINTS * 32) {
+ pr_cont(" " X86_CAP_FMT, x86_cap_flag(bit));
+ setup_clear_cpu_cap(bit);
+ }
+ } while (res == 2);
+ pr_cont("\n");
}
/*
--
2.25.1
From: Alexandru Elisei <[email protected]>
[ Upstream commit 490d7b7c0845eacf5593db333fd2ae7715416e16 ]
Writes to the PMXEVTYPER_EL0 register are not self-synchronising. In
armv8pmu_enable_event(), the PE can reorder configuring the event type
after we have enabled the counter and the interrupt. This can lead to an
interrupt being asserted because of the previous event type that we were
counting using the same counter, not the one that we've just configured.
The same rationale applies to writes to the PMINTENSET_EL1 register. The PE
can reorder enabling the interrupt at any point in the future after we have
enabled the event.
Prevent both situations from happening by adding an ISB just before we
enable the event counter.
Fixes: 030896885ade ("arm64: Performance counters support")
Reported-by: Julien Thierry <[email protected]>
Signed-off-by: Alexandru Elisei <[email protected]>
Tested-by: Sumit Garg <[email protected]> (Developerbox)
Cc: Julien Thierry <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/perf_event.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 581602413a130..c26d84ff0e224 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -510,6 +510,11 @@ static u32 armv8pmu_event_cnten_mask(struct perf_event *event)
static inline void armv8pmu_enable_counter(u32 mask)
{
+ /*
+ * Make sure event configuration register writes are visible before we
+ * enable the counter.
+ * */
+ isb();
write_sysreg(mask, pmcntenset_el0);
}
--
2.25.1
From: Kan Liang <[email protected]>
[ Upstream commit ee139385432e919f4d1f59b80edbc073cdae1391 ]
An oops is triggered by the fuzzy test.
[ 327.853081] unchecked MSR access error: RDMSR from 0x70c at rIP:
0xffffffffc082c820 (uncore_msr_read_counter+0x10/0x50 [intel_uncore])
[ 327.853083] Call Trace:
[ 327.853085] <IRQ>
[ 327.853089] uncore_pmu_event_start+0x85/0x170 [intel_uncore]
[ 327.853093] uncore_pmu_event_add+0x1a4/0x410 [intel_uncore]
[ 327.853097] ? event_sched_in.isra.118+0xca/0x240
There are 2 GP counters for each CBOX, but the current code claims 4
counters. Accessing the invalid registers triggers the oops.
Fixes: 6e394376ee89 ("perf/x86/intel/uncore: Add Intel Icelake uncore support")
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/uncore_snb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index 300937cc8795b..3b70c2ff177c0 100644
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -314,7 +314,7 @@ static struct intel_uncore_ops icl_uncore_msr_ops = {
static struct intel_uncore_type icl_uncore_cbox = {
.name = "cbox",
- .num_counters = 4,
+ .num_counters = 2,
.perf_ctr_bits = 44,
.perf_ctr = ICL_UNC_CBO_0_PER_CTR0,
.event_ctl = SNB_UNC_CBO_0_PERFEVTSEL0,
--
2.25.1
From: Herbert Xu <[email protected]>
commit cbdad1f246dd98e6c9c32a6e5212337f542aa7e0 upstream.
The async path cannot use MAY_BACKLOG because it is not meant to
block, which is what MAY_BACKLOG does. On the other hand, both
the sync and async paths can make use of MAY_SLEEP.
Fixes: 83094e5e9e49 ("crypto: af_alg - add async support to...")
Cc: <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/algif_aead.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/crypto/algif_aead.c
+++ b/crypto/algif_aead.c
@@ -78,7 +78,7 @@ static int crypto_aead_copy_sgl(struct c
SYNC_SKCIPHER_REQUEST_ON_STACK(skreq, null_tfm);
skcipher_request_set_sync_tfm(skreq, null_tfm);
- skcipher_request_set_callback(skreq, CRYPTO_TFM_REQ_MAY_BACKLOG,
+ skcipher_request_set_callback(skreq, CRYPTO_TFM_REQ_MAY_SLEEP,
NULL, NULL);
skcipher_request_set_crypt(skreq, src, dst, len, NULL);
@@ -291,19 +291,20 @@ static int _aead_recvmsg(struct socket *
areq->outlen = outlen;
aead_request_set_callback(&areq->cra_u.aead_req,
- CRYPTO_TFM_REQ_MAY_BACKLOG,
+ CRYPTO_TFM_REQ_MAY_SLEEP,
af_alg_async_cb, areq);
err = ctx->enc ? crypto_aead_encrypt(&areq->cra_u.aead_req) :
crypto_aead_decrypt(&areq->cra_u.aead_req);
/* AIO operation in progress */
- if (err == -EINPROGRESS || err == -EBUSY)
+ if (err == -EINPROGRESS)
return -EIOCBQUEUED;
sock_put(sk);
} else {
/* Synchronous operation */
aead_request_set_callback(&areq->cra_u.aead_req,
+ CRYPTO_TFM_REQ_MAY_SLEEP |
CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &ctx->wait);
err = crypto_wait_req(ctx->enc ?
From: Libing Zhou <[email protected]>
[ Upstream commit f94c91f7ba3ba7de2bc8aa31be28e1abb22f849e ]
When nmi_check_duration() is checking the time an NMI handler took to
execute, the whole_msecs value used should be read from the @duration
argument, not from the ->max_duration, the latter being used to store
the current maximal duration.
[ bp: Rewrite commit message. ]
Fixes: 248ed51048c4 ("x86/nmi: Remove irq_work from the long duration NMI handler")
Suggested-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Libing Zhou <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Changbin Du <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/nmi.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index d7c5e44b26f73..091752c3a19e2 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -102,7 +102,6 @@ fs_initcall(nmi_warning_debugfs);
static void nmi_check_duration(struct nmiaction *action, u64 duration)
{
- u64 whole_msecs = READ_ONCE(action->max_duration);
int remainder_ns, decimal_msecs;
if (duration < nmi_longest_ns || duration < action->max_duration)
@@ -110,12 +109,12 @@ static void nmi_check_duration(struct nmiaction *action, u64 duration)
action->max_duration = duration;
- remainder_ns = do_div(whole_msecs, (1000 * 1000));
+ remainder_ns = do_div(duration, (1000 * 1000));
decimal_msecs = remainder_ns / 1000;
printk_ratelimited(KERN_INFO
"INFO: NMI handler (%ps) took too long to run: %lld.%03d msecs\n",
- action->handler, whole_msecs, decimal_msecs);
+ action->handler, duration, decimal_msecs);
}
static int nmi_handle(unsigned int type, struct pt_regs *regs)
--
2.25.1
From: Karsten Graul <[email protected]>
[ Upstream commit ef12ad45880b696eb993d86c481ca891836ab593 ]
The SMCD_DMBE_SIZES should include all valid DMBE buffer sizes, so the
correct value is 6 which means 1MB. With 7 the registration of an ISM
buffer would always fail because of the invalid size requested.
Fix that and set the value to 6.
Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -1595,7 +1595,7 @@ out:
return rc;
}
-#define SMCD_DMBE_SIZES 7 /* 0 -> 16KB, 1 -> 32KB, .. 6 -> 1MB */
+#define SMCD_DMBE_SIZES 6 /* 0 -> 16KB, 1 -> 32KB, .. 6 -> 1MB */
static struct smc_buf_desc *smcd_new_buf_create(struct smc_link_group *lgr,
bool is_dmb, int bufsize)
From: Maulik Shah <[email protected]>
[ Upstream commit c5f72aeb659eb2f809b9531d759651514d42aa3a ]
Both IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags are already
set for msmgpio's parent PDC irqchip but GPIO interrupts do not get masked
during suspend or during setting irq type since genirq checks irqchip flag
of msmgpio irqchip which forwards these calls to its parent PDC irqchip.
Add irqchip specific flags for msmgpio irqchip to mask non wakeirqs during
suspend and mask before setting irq type. Masking before changing type make
sures any spurious interrupt is not detected during this operation.
Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Maulik Shah <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Tested-by: Stephen Boyd <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index c322f30a20648..a28a96ac2b671 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -1226,6 +1226,8 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
pctrl->irq_chip.irq_release_resources = msm_gpio_irq_relres;
pctrl->irq_chip.irq_set_affinity = msm_gpio_irq_set_affinity;
pctrl->irq_chip.irq_set_vcpu_affinity = msm_gpio_irq_set_vcpu_affinity;
+ pctrl->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND |
+ IRQCHIP_SET_TYPE_MASKED;
np = of_parse_phandle(pctrl->dev->of_node, "wakeup-parent", 0);
if (np) {
--
2.25.1
From: Maulik Shah <[email protected]>
[ Upstream commit f41aaca593377a4fe3984459fd4539481263b4cd ]
msmgpio irqchip was not using return value of irq_set_irq_wake() callback
since previously GIC-v3 irqchip neither had IRQCHIP_SKIP_SET_WAKE flag nor
it implemented .irq_set_wake callback. This lead to irq_set_irq_wake()
return error -ENXIO.
However from 'commit 4110b5cbb014 ("irqchip/gic-v3: Allow interrupt to be
configured as wake-up sources")' GIC irqchip has IRQCHIP_SKIP_SET_WAKE
flag.
Use return value from irq_set_irq_wake() and irq_chip_set_wake_parent()
instead of always returning success.
Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Maulik Shah <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Tested-by: Stephen Boyd <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index a28a96ac2b671..22283ba797cd0 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -1060,12 +1060,10 @@ static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
* when TLMM is powered on. To allow that, enable the GPIO
* summary line to be wakeup capable at GIC.
*/
- if (d->parent_data)
- irq_chip_set_wake_parent(d, on);
-
- irq_set_irq_wake(pctrl->irq, on);
+ if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
+ return irq_chip_set_wake_parent(d, on);
- return 0;
+ return irq_set_irq_wake(pctrl->irq, on);
}
static int msm_gpio_irq_reqres(struct irq_data *d)
--
2.25.1
[ Upstream commit 871a93b0aad65a7f44ee25f2d17932ef6d559850 ]
Kan reported that n_metric gets corrupted for cancelled transactions;
a similar issue exists for n_pair for AMD's Large Increment thing.
The problem was confirmed and confirmed fixed by Kim using:
sudo perf stat -e "{cycles,cycles,cycles,cycles}:D" -a sleep 10 &
# should succeed:
sudo perf stat -e "{fp_ret_sse_avx_ops.all}:D" -a workload
# should fail:
sudo perf stat -e "{fp_ret_sse_avx_ops.all,fp_ret_sse_avx_ops.all,cycles}:D" -a workload
# previously failed, now succeeds with this patch:
sudo perf stat -e "{fp_ret_sse_avx_ops.all}:D" -a workload
Fixes: 5738891229a2 ("perf/x86/amd: Add support for Large Increment per Cycle Events")
Reported-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Kim Phillips <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/core.c | 6 +++++-
arch/x86/events/perf_event.h | 1 +
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index 4103665c6e032..29640b4079af0 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -1087,8 +1087,10 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader,
cpuc->event_list[n] = event;
n++;
- if (is_counter_pair(&event->hw))
+ if (is_counter_pair(&event->hw)) {
cpuc->n_pair++;
+ cpuc->n_txn_pair++;
+ }
}
return n;
}
@@ -1953,6 +1955,7 @@ static void x86_pmu_start_txn(struct pmu *pmu, unsigned int txn_flags)
perf_pmu_disable(pmu);
__this_cpu_write(cpu_hw_events.n_txn, 0);
+ __this_cpu_write(cpu_hw_events.n_txn_pair, 0);
}
/*
@@ -1978,6 +1981,7 @@ static void x86_pmu_cancel_txn(struct pmu *pmu)
*/
__this_cpu_sub(cpu_hw_events.n_added, __this_cpu_read(cpu_hw_events.n_txn));
__this_cpu_sub(cpu_hw_events.n_events, __this_cpu_read(cpu_hw_events.n_txn));
+ __this_cpu_sub(cpu_hw_events.n_pair, __this_cpu_read(cpu_hw_events.n_txn_pair));
perf_pmu_enable(pmu);
}
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index e17a3d8a47ede..d4d482d16fe18 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -198,6 +198,7 @@ struct cpu_hw_events {
they've never been enabled yet */
int n_txn; /* the # last events in the below arrays;
added in the current transaction */
+ int n_txn_pair;
int assign[X86_PMC_IDX_MAX]; /* event to counter assignment */
u64 tags[X86_PMC_IDX_MAX];
--
2.25.1
From: Kai Vehmanen <[email protected]>
commit ce1558c285f9ad04c03b46833a028230771cc0a7 upstream.
A race exists between closing a PCM and update of ELD data. In
hdmi_pcm_close(), hinfo->nid value is modified without taking
spec->pcm_lock. If this happens concurrently while processing an ELD
update in hdmi_pcm_setup_pin(), converter assignment may be done
incorrectly.
This bug was found by hitting a WARN_ON in snd_hda_spdif_ctls_assign()
in a HDMI receiver connection stress test:
[2739.684569] WARNING: CPU: 5 PID: 2090 at sound/pci/hda/patch_hdmi.c:1898 check_non_pcm_per_cvt+0x41/0x50 [snd_hda_codec_hdmi]
...
[2739.684707] Call Trace:
[2739.684720] update_eld+0x121/0x5a0 [snd_hda_codec_hdmi]
[2739.684736] hdmi_present_sense+0x21e/0x3b0 [snd_hda_codec_hdmi]
[2739.684750] check_presence_and_report+0x81/0xd0 [snd_hda_codec_hdmi]
[2739.684842] intel_audio_codec_enable+0x122/0x190 [i915]
Fixes: 42b2987079ec ("ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode")
Signed-off-by: Kai Vehmanen <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1989,22 +1989,25 @@ static int hdmi_pcm_close(struct hda_pcm
int pinctl;
int err = 0;
+ mutex_lock(&spec->pcm_lock);
if (hinfo->nid) {
pcm_idx = hinfo_to_pcm_index(codec, hinfo);
- if (snd_BUG_ON(pcm_idx < 0))
- return -EINVAL;
+ if (snd_BUG_ON(pcm_idx < 0)) {
+ err = -EINVAL;
+ goto unlock;
+ }
cvt_idx = cvt_nid_to_cvt_index(codec, hinfo->nid);
- if (snd_BUG_ON(cvt_idx < 0))
- return -EINVAL;
+ if (snd_BUG_ON(cvt_idx < 0)) {
+ err = -EINVAL;
+ goto unlock;
+ }
per_cvt = get_cvt(spec, cvt_idx);
-
snd_BUG_ON(!per_cvt->assigned);
per_cvt->assigned = 0;
hinfo->nid = 0;
azx_stream(get_azx_dev(substream))->stripe = 0;
- mutex_lock(&spec->pcm_lock);
snd_hda_spdif_ctls_unassign(codec, pcm_idx);
clear_bit(pcm_idx, &spec->pcm_in_use);
pin_idx = hinfo_to_pin_index(codec, hinfo);
@@ -2034,10 +2037,11 @@ static int hdmi_pcm_close(struct hda_pcm
per_pin->setup = false;
per_pin->channels = 0;
mutex_unlock(&per_pin->lock);
- unlock:
- mutex_unlock(&spec->pcm_lock);
}
+unlock:
+ mutex_unlock(&spec->pcm_lock);
+
return err;
}
From: Davide Caratti <[email protected]>
[ Upstream commit 37198e93ced70733f0b993dff28b7c33857e254f ]
using packetdrill it's possible to observe the same MPTCP DSN being acked
by different subflows with DACK4 and DACK8. This is in contrast with what
specified in RFC8684 §3.3.2: if an MPTCP endpoint transmits a 64-bit wide
DSN, it MUST be acknowledged with a 64-bit wide DACK. Fix 'use_64bit_ack'
variable to make it a property of MPTCP sockets, not TCP subflows.
Fixes: a0c1d0eafd1e ("mptcp: Use 32-bit DATA_ACK when possible")
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mptcp/options.c | 2 +-
net/mptcp/protocol.h | 2 +-
net/mptcp/subflow.c | 3 +--
3 files changed, 3 insertions(+), 4 deletions(-)
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -517,7 +517,7 @@ static bool mptcp_established_options_ds
return ret;
}
- if (subflow->use_64bit_ack) {
+ if (READ_ONCE(msk->use_64bit_ack)) {
ack_size = TCPOLEN_MPTCP_DSS_ACK64;
opts->ext_copy.data_ack = msk->ack_seq;
opts->ext_copy.ack64 = 1;
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -199,6 +199,7 @@ struct mptcp_sock {
u32 token;
unsigned long flags;
bool can_ack;
+ bool use_64bit_ack; /* Set when we received a 64-bit DSN */
spinlock_t join_list_lock;
struct work_struct work;
struct list_head conn_list;
@@ -285,7 +286,6 @@ struct mptcp_subflow_context {
data_avail : 1,
rx_eof : 1,
data_fin_tx_enable : 1,
- use_64bit_ack : 1, /* Set when we received a 64-bit DSN */
can_ack : 1; /* only after processing the remote a key */
u64 data_fin_tx_seq;
u32 remote_nonce;
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -682,12 +682,11 @@ static enum mapping_status get_mapping_s
if (!mpext->dsn64) {
map_seq = expand_seq(subflow->map_seq, subflow->map_data_len,
mpext->data_seq);
- subflow->use_64bit_ack = 0;
pr_debug("expanded seq=%llu", subflow->map_seq);
} else {
map_seq = mpext->data_seq;
- subflow->use_64bit_ack = 1;
}
+ WRITE_ONCE(mptcp_sk(subflow->conn)->use_64bit_ack, !!mpext->dsn64);
if (subflow->map_valid) {
/* Allow replacing only with an identical map */
From: Vinay Kumar Yadav <[email protected]>
[ Upstream commit 9819f22c410b4bf6589d3126e8bc3952db507cbf ]
Add the logic to compare net_device returned by ip_dev_find()
with the net_device list in cdev->ports[] array and return
net_device if matched else NULL.
Fixes: 6abde0b24122 ("crypto/chtls: IPv6 support for inline TLS")
Signed-off-by: Venkatesh Ellapu <[email protected]>
Signed-off-by: Vinay Kumar Yadav <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/chelsio/chtls/chtls_cm.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/crypto/chelsio/chtls/chtls_cm.c
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -92,11 +92,13 @@ static void chtls_sock_release(struct kr
static struct net_device *chtls_find_netdev(struct chtls_dev *cdev,
struct sock *sk)
{
+ struct adapter *adap = pci_get_drvdata(cdev->pdev);
struct net_device *ndev = cdev->ports[0];
#if IS_ENABLED(CONFIG_IPV6)
struct net_device *temp;
int addr_type;
#endif
+ int i;
switch (sk->sk_family) {
case PF_INET:
@@ -127,8 +129,12 @@ static struct net_device *chtls_find_net
return NULL;
if (is_vlan_dev(ndev))
- return vlan_dev_real_dev(ndev);
- return ndev;
+ ndev = vlan_dev_real_dev(ndev);
+
+ for_each_port(adap, i)
+ if (cdev->ports[i] == ndev)
+ return ndev;
+ return NULL;
}
static void assign_rxopt(struct sock *sk, unsigned int opt)
From: Vinay Kumar Yadav <[email protected]>
[ Upstream commit 0fb5f0160a36d7acaa8e84ce873af99f94b60484 ]
In chtls_sendpage() socket lock is released but not acquired,
fix it by taking lock.
Fixes: 36bedb3f2e5b ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Vinay Kumar Yadav <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/chelsio/chtls/chtls_io.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/crypto/chelsio/chtls/chtls_io.c
+++ b/drivers/crypto/chelsio/chtls/chtls_io.c
@@ -1240,6 +1240,7 @@ int chtls_sendpage(struct sock *sk, stru
copied = 0;
csk = rcu_dereference_sk_user_data(sk);
cdev = csk->cdev;
+ lock_sock(sk);
timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);
err = sk_stream_wait_connect(sk, &timeo);
From: Qiu Wenbo <[email protected]>
commit 08befca40026136c14c3cd84f9e36c4cd20a358e upstream.
After installing archlinux, the mute led and micmute led are not working
at all. This patch fix this issue by applying a fixup from similar
model. These mute leds are confirmed working on HP Elitebook 845 G7.
Signed-off-by: Qiu Wenbo <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7786,6 +7786,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x874e, "HP", ALC274_FIXUP_HP_MIC),
+ SND_PCI_QUIRK(0x103c, 0x8760, "HP", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x877a, "HP", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x877d, "HP", ALC236_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC),
From: Lad Prabhakar <[email protected]>
[ Upstream commit 576f5d4ba8f672953513280510abf9a736b015cc ]
During testing this sensor on iW-RainboW-G21D-Qseven platform in 8-bit DVP
mode with rcar-vin bridge noticed the capture worked fine for the first run
(with yavta), but for subsequent runs the bridge driver waited for the
frame to be captured. Debugging further noticed the data lines were
enabled/disabled in stream on/off callback and dumping the register
contents 0x3017/0x3018 in ov5640_set_stream_dvp() reported the correct
values, but yet frame capturing failed.
To get around this issue data lines are enabled in s_power callback.
(Also the sensor remains in power down mode if not streaming so power
consumption shouldn't be affected)
Fixes: f22996db44e2d ("media: ov5640: add support of DVP parallel interface")
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Tested-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov5640.c | 73 +++++++++++++++++++++-----------------
1 file changed, 40 insertions(+), 33 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 90db5443c4248..3a4268aa5f023 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -276,8 +276,7 @@ static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
/* YUV422 UYVY VGA@30fps */
static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
{0x3103, 0x11, 0, 0}, {0x3008, 0x82, 0, 5}, {0x3008, 0x42, 0, 0},
- {0x3103, 0x03, 0, 0}, {0x3017, 0x00, 0, 0}, {0x3018, 0x00, 0, 0},
- {0x3630, 0x36, 0, 0},
+ {0x3103, 0x03, 0, 0}, {0x3630, 0x36, 0, 0},
{0x3631, 0x0e, 0, 0}, {0x3632, 0xe2, 0, 0}, {0x3633, 0x12, 0, 0},
{0x3621, 0xe0, 0, 0}, {0x3704, 0xa0, 0, 0}, {0x3703, 0x5a, 0, 0},
{0x3715, 0x78, 0, 0}, {0x3717, 0x01, 0, 0}, {0x370b, 0x60, 0, 0},
@@ -1283,33 +1282,6 @@ static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on)
if (ret)
return ret;
- /*
- * enable VSYNC/HREF/PCLK DVP control lines
- * & D[9:6] DVP data lines
- *
- * PAD OUTPUT ENABLE 01
- * - 6: VSYNC output enable
- * - 5: HREF output enable
- * - 4: PCLK output enable
- * - [3:0]: D[9:6] output enable
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_PAD_OUTPUT_ENABLE01,
- on ? 0x7f : 0);
- if (ret)
- return ret;
-
- /*
- * enable D[5:0] DVP data lines
- *
- * PAD OUTPUT ENABLE 02
- * - [7:2]: D[5:0] output enable
- */
- ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02,
- on ? 0xfc : 0);
- if (ret)
- return ret;
-
return ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, on ?
OV5640_REG_SYS_CTRL0_SW_PWUP :
OV5640_REG_SYS_CTRL0_SW_PWDN);
@@ -2069,6 +2041,40 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on)
return 0;
}
+static int ov5640_set_power_dvp(struct ov5640_dev *sensor, bool on)
+{
+ int ret;
+
+ if (!on) {
+ /* Reset settings to their default values. */
+ ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01, 0x00);
+ ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02, 0x00);
+ return 0;
+ }
+
+ /*
+ * enable VSYNC/HREF/PCLK DVP control lines
+ * & D[9:6] DVP data lines
+ *
+ * PAD OUTPUT ENABLE 01
+ * - 6: VSYNC output enable
+ * - 5: HREF output enable
+ * - 4: PCLK output enable
+ * - [3:0]: D[9:6] output enable
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01, 0x7f);
+ if (ret)
+ return ret;
+
+ /*
+ * enable D[5:0] DVP data lines
+ *
+ * PAD OUTPUT ENABLE 02
+ * - [7:2]: D[5:0] output enable
+ */
+ return ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02, 0xfc);
+}
+
static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
{
int ret = 0;
@@ -2083,11 +2089,12 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
goto power_off;
}
- if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY)
ret = ov5640_set_power_mipi(sensor, on);
- if (ret)
- goto power_off;
- }
+ else
+ ret = ov5640_set_power_dvp(sensor, on);
+ if (ret)
+ goto power_off;
if (!on)
ov5640_set_power_off(sensor);
--
2.25.1
From: Brad Bishop <[email protected]>
[ Upstream commit 7909eebb2bea7fdbb2de0aa794cf29843761ed5b ]
All of the switches in N2_count_control in the counter configuration are
required to make the branch if not equal and increment command work.
Set them when using bneq+.
A side effect of this mode requires a dummy write to TDR when both
transmitting and receiving otherwise the controller won't start shifting
receive data.
It is likely not possible to avoid TDR underrun errors in this mode and
they are harmless, so do not check for them.
Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Brad Bishop <[email protected]>
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsi.c | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c
index 8f64af0140e09..bb18b407cdcf3 100644
--- a/drivers/spi/spi-fsi.c
+++ b/drivers/spi/spi-fsi.c
@@ -29,6 +29,10 @@
#define SPI_FSI_ERROR 0x0
#define SPI_FSI_COUNTER_CFG 0x1
#define SPI_FSI_COUNTER_CFG_LOOPS(x) (((u64)(x) & 0xffULL) << 32)
+#define SPI_FSI_COUNTER_CFG_N2_RX BIT_ULL(8)
+#define SPI_FSI_COUNTER_CFG_N2_TX BIT_ULL(9)
+#define SPI_FSI_COUNTER_CFG_N2_IMPLICIT BIT_ULL(10)
+#define SPI_FSI_COUNTER_CFG_N2_RELOAD BIT_ULL(11)
#define SPI_FSI_CFG1 0x2
#define SPI_FSI_CLOCK_CFG 0x3
#define SPI_FSI_CLOCK_CFG_MM_ENABLE BIT_ULL(32)
@@ -61,7 +65,7 @@
#define SPI_FSI_STATUS_RDR_OVERRUN BIT_ULL(62)
#define SPI_FSI_STATUS_RDR_FULL BIT_ULL(63)
#define SPI_FSI_STATUS_ANY_ERROR \
- (SPI_FSI_STATUS_ERROR | SPI_FSI_STATUS_TDR_UNDERRUN | \
+ (SPI_FSI_STATUS_ERROR | \
SPI_FSI_STATUS_TDR_OVERRUN | SPI_FSI_STATUS_RDR_UNDERRUN | \
SPI_FSI_STATUS_RDR_OVERRUN)
#define SPI_FSI_PORT_CTRL 0x9
@@ -238,6 +242,7 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
int rc;
u8 len = min(transfer->len, 8U);
u8 rem = transfer->len % len;
+ u64 cfg = 0ULL;
loops = transfer->len / len;
@@ -258,8 +263,14 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
if (loops > 1) {
fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
- rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG,
- SPI_FSI_COUNTER_CFG_LOOPS(loops - 1));
+ cfg = SPI_FSI_COUNTER_CFG_LOOPS(loops - 1);
+ if (transfer->rx_buf)
+ cfg |= SPI_FSI_COUNTER_CFG_N2_RX |
+ SPI_FSI_COUNTER_CFG_N2_TX |
+ SPI_FSI_COUNTER_CFG_N2_IMPLICIT |
+ SPI_FSI_COUNTER_CFG_N2_RELOAD;
+
+ rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, cfg);
if (rc)
return rc;
}
@@ -275,6 +286,7 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
{
int rc = 0;
u64 status = 0ULL;
+ u64 cfg = 0ULL;
if (transfer->tx_buf) {
int nb;
@@ -312,6 +324,16 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
u64 in = 0ULL;
u8 *rx = transfer->rx_buf;
+ rc = fsi_spi_read_reg(ctx, SPI_FSI_COUNTER_CFG, &cfg);
+ if (rc)
+ return rc;
+
+ if (cfg & SPI_FSI_COUNTER_CFG_N2_IMPLICIT) {
+ rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, 0);
+ if (rc)
+ return rc;
+ }
+
while (transfer->len > recv) {
do {
rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS,
--
2.25.1
From: Lukasz Luba <[email protected]>
[ Upstream commit da0777d35f47892f359c3f73ea155870bb595700 ]
In find_energy_efficient_cpu() 'cpu_cap' could be less that 'util'.
It might be because of RT, DL (so higher sched class than CFS), irq or
thermal pressure signal, which reduce the capacity value.
In such situation the result of 'cpu_cap - util' might be negative but
stored in the unsigned long. Then it might be compared with other unsigned
long when uclamp_rq_util_with() reduced the 'util' such that is passes the
fits_capacity() check.
Prevent this situation and make the arithmetic more safe.
Fixes: 1d42509e475cd ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Signed-off-by: Lukasz Luba <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 6b3b59cc51d6c..f71e8b0e0346a 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6586,7 +6586,8 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu)
util = cpu_util_next(cpu, p, cpu);
cpu_cap = capacity_of(cpu);
- spare_cap = cpu_cap - util;
+ spare_cap = cpu_cap;
+ lsub_positive(&spare_cap, util);
/*
* Skip CPUs that cannot satisfy the capacity request.
--
2.25.1
From: Yang Yang <[email protected]>
[ Upstream commit 47ce030b7ac5a5259a9a5919f230b52497afc31a ]
blk_exit_queue will free elevator_data, while blk_mq_run_work_fn
will access it. Move cancel of hctx->run_work to the front of
blk_exit_queue to avoid use-after-free.
Fixes: 1b97871b501f ("blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release")
Signed-off-by: Yang Yang <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq-sysfs.c | 2 --
block/blk-sysfs.c | 9 ++++++++-
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/block/blk-mq-sysfs.c b/block/blk-mq-sysfs.c
index 062229395a507..7b52e7657b2d1 100644
--- a/block/blk-mq-sysfs.c
+++ b/block/blk-mq-sysfs.c
@@ -36,8 +36,6 @@ static void blk_mq_hw_sysfs_release(struct kobject *kobj)
struct blk_mq_hw_ctx *hctx = container_of(kobj, struct blk_mq_hw_ctx,
kobj);
- cancel_delayed_work_sync(&hctx->run_work);
-
if (hctx->flags & BLK_MQ_F_BLOCKING)
cleanup_srcu_struct(hctx->srcu);
blk_free_flush_queue(hctx->fq);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 02643e149d5e1..95fea6c18baf7 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -896,9 +896,16 @@ static void __blk_release_queue(struct work_struct *work)
blk_free_queue_stats(q->stats);
- if (queue_is_mq(q))
+ if (queue_is_mq(q)) {
+ struct blk_mq_hw_ctx *hctx;
+ int i;
+
cancel_delayed_work_sync(&q->requeue_work);
+ queue_for_each_hw_ctx(q, hctx, i)
+ cancel_delayed_work_sync(&hctx->run_work);
+ }
+
blk_exit_queue(q);
blk_queue_free_zone_bitmaps(q);
--
2.25.1
From: Łukasz Stelmach <[email protected]>
[ Upstream commit 2f4db6f705c5cba85d23836c19b44d9687dc1334 ]
Check return values in prepare_dma() and s3c64xx_spi_config() and
propagate errors upwards.
Fixes: 788437273fa8 ("spi: s3c64xx: move to generic dmaengine API")
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Łukasz Stelmach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-s3c64xx.c | 50 ++++++++++++++++++++++++++++++++-------
1 file changed, 41 insertions(+), 9 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index fb5e2ba4b6b97..6587a7dc3f5ba 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -122,6 +122,7 @@
struct s3c64xx_spi_dma_data {
struct dma_chan *ch;
+ dma_cookie_t cookie;
enum dma_transfer_direction direction;
};
@@ -264,12 +265,13 @@ static void s3c64xx_spi_dmacb(void *data)
spin_unlock_irqrestore(&sdd->lock, flags);
}
-static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
+static int prepare_dma(struct s3c64xx_spi_dma_data *dma,
struct sg_table *sgt)
{
struct s3c64xx_spi_driver_data *sdd;
struct dma_slave_config config;
struct dma_async_tx_descriptor *desc;
+ int ret;
memset(&config, 0, sizeof(config));
@@ -293,12 +295,24 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
desc = dmaengine_prep_slave_sg(dma->ch, sgt->sgl, sgt->nents,
dma->direction, DMA_PREP_INTERRUPT);
+ if (!desc) {
+ dev_err(&sdd->pdev->dev, "unable to prepare %s scatterlist",
+ dma->direction == DMA_DEV_TO_MEM ? "rx" : "tx");
+ return -ENOMEM;
+ }
desc->callback = s3c64xx_spi_dmacb;
desc->callback_param = dma;
- dmaengine_submit(desc);
+ dma->cookie = dmaengine_submit(desc);
+ ret = dma_submit_error(dma->cookie);
+ if (ret) {
+ dev_err(&sdd->pdev->dev, "DMA submission failed");
+ return -EIO;
+ }
+
dma_async_issue_pending(dma->ch);
+ return 0;
}
static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable)
@@ -348,11 +362,12 @@ static bool s3c64xx_spi_can_dma(struct spi_master *master,
return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1;
}
-static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
+static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct spi_transfer *xfer, int dma_mode)
{
void __iomem *regs = sdd->regs;
u32 modecfg, chcfg;
+ int ret = 0;
modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
@@ -378,7 +393,7 @@ static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
chcfg |= S3C64XX_SPI_CH_TXCH_ON;
if (dma_mode) {
modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
- prepare_dma(&sdd->tx_dma, &xfer->tx_sg);
+ ret = prepare_dma(&sdd->tx_dma, &xfer->tx_sg);
} else {
switch (sdd->cur_bpw) {
case 32:
@@ -410,12 +425,17 @@ static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
| S3C64XX_SPI_PACKET_CNT_EN,
regs + S3C64XX_SPI_PACKET_CNT);
- prepare_dma(&sdd->rx_dma, &xfer->rx_sg);
+ ret = prepare_dma(&sdd->rx_dma, &xfer->rx_sg);
}
}
+ if (ret)
+ return ret;
+
writel(modecfg, regs + S3C64XX_SPI_MODE_CFG);
writel(chcfg, regs + S3C64XX_SPI_CH_CFG);
+
+ return 0;
}
static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
@@ -548,9 +568,10 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
return 0;
}
-static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
+static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
{
void __iomem *regs = sdd->regs;
+ int ret;
u32 val;
/* Disable Clock */
@@ -598,7 +619,9 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
if (sdd->port_conf->clk_from_cmu) {
/* The src_clk clock is divided internally by 2 */
- clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
+ ret = clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
+ if (ret)
+ return ret;
} else {
/* Configure Clock */
val = readl(regs + S3C64XX_SPI_CLK_CFG);
@@ -612,6 +635,8 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
val |= S3C64XX_SPI_ENCLK_ENABLE;
writel(val, regs + S3C64XX_SPI_CLK_CFG);
}
+
+ return 0;
}
#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
@@ -654,7 +679,9 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
sdd->cur_bpw = bpw;
sdd->cur_speed = speed;
sdd->cur_mode = spi->mode;
- s3c64xx_spi_config(sdd);
+ status = s3c64xx_spi_config(sdd);
+ if (status)
+ return status;
}
if (!is_polling(sdd) && (xfer->len > fifo_len) &&
@@ -681,10 +708,15 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
/* Start the signals */
s3c64xx_spi_set_cs(spi, true);
- s3c64xx_enable_datapath(sdd, xfer, use_dma);
+ status = s3c64xx_enable_datapath(sdd, xfer, use_dma);
spin_unlock_irqrestore(&sdd->lock, flags);
+ if (status) {
+ dev_err(&spi->dev, "failed to enable data path for transfer: %d\n", status);
+ break;
+ }
+
if (use_dma)
status = s3c64xx_wait_for_dma(sdd, xfer);
else
--
2.25.1
From: Tianjia Zhang <[email protected]>
[ Upstream commit bbf2d06a9d767718bfe6028d6288c03edb98554a ]
In the case of a failed retry, a positive value EIO is returned here. I
think this is a typo error. It is necessary to return an error value.
[mkp: caller checks != 0 but the rest of the file uses -Exxx so fix this up
to be consistent]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0691094ff3f2 ("scsi: qla2xxx: Add logic to detect ABTS hang and response completion")
Cc: Quinn Tran <[email protected]>
Signed-off-by: Tianjia Zhang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_target.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 90289162dbd4c..a034e9caa2997 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -5668,7 +5668,7 @@ static int qlt_chk_unresolv_exchg(struct scsi_qla_host *vha,
/* found existing exchange */
qpair->retry_term_cnt++;
if (qpair->retry_term_cnt >= 5) {
- rc = EIO;
+ rc = -EIO;
qpair->retry_term_cnt = 0;
ql_log(ql_log_warn, vha, 0xffff,
"Unable to send ABTS Respond. Dumping firmware.\n");
--
2.25.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 02f47faa25db134f6043fb6b12a68b5d4c980bb6 ]
The test is reading UAPI kernel structure from user-space. So it doesn't need
CO-RE relocations and has to use bpf_probe_read_user().
Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/progs/test_vmlinux.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/bpf/progs/test_vmlinux.c b/tools/testing/selftests/bpf/progs/test_vmlinux.c
index 5611b564d3b1c..f54b2293c490f 100644
--- a/tools/testing/selftests/bpf/progs/test_vmlinux.c
+++ b/tools/testing/selftests/bpf/progs/test_vmlinux.c
@@ -19,12 +19,14 @@ SEC("tp/syscalls/sys_enter_nanosleep")
int handle__tp(struct trace_event_raw_sys_enter *args)
{
struct __kernel_timespec *ts;
+ long tv_nsec;
if (args->id != __NR_nanosleep)
return 0;
ts = (void *)args->args[0];
- if (BPF_CORE_READ(ts, tv_nsec) != MY_TV_NSEC)
+ if (bpf_probe_read_user(&tv_nsec, sizeof(ts->tv_nsec), &ts->tv_nsec) ||
+ tv_nsec != MY_TV_NSEC)
return 0;
tp_called = true;
@@ -35,12 +37,14 @@ SEC("raw_tp/sys_enter")
int BPF_PROG(handle__raw_tp, struct pt_regs *regs, long id)
{
struct __kernel_timespec *ts;
+ long tv_nsec;
if (id != __NR_nanosleep)
return 0;
ts = (void *)PT_REGS_PARM1_CORE(regs);
- if (BPF_CORE_READ(ts, tv_nsec) != MY_TV_NSEC)
+ if (bpf_probe_read_user(&tv_nsec, sizeof(ts->tv_nsec), &ts->tv_nsec) ||
+ tv_nsec != MY_TV_NSEC)
return 0;
raw_tp_called = true;
@@ -51,12 +55,14 @@ SEC("tp_btf/sys_enter")
int BPF_PROG(handle__tp_btf, struct pt_regs *regs, long id)
{
struct __kernel_timespec *ts;
+ long tv_nsec;
if (id != __NR_nanosleep)
return 0;
ts = (void *)PT_REGS_PARM1_CORE(regs);
- if (BPF_CORE_READ(ts, tv_nsec) != MY_TV_NSEC)
+ if (bpf_probe_read_user(&tv_nsec, sizeof(ts->tv_nsec), &ts->tv_nsec) ||
+ tv_nsec != MY_TV_NSEC)
return 0;
tp_btf_called = true;
--
2.25.1
From: Weqaar Janjua <[email protected]>
[ Upstream commit b69e56cf765155dcac0037d7d0f162a2afab76c2 ]
The txpush program in the xdpsock sample application is supposed
to send out all packets in the umem in a round-robin fashion.
The problem is that it only cycled through the first BATCH_SIZE
worth of packets. Fixed this so that it cycles through all buffers
in the umem as intended.
Fixes: 248c7f9c0e21 ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access")
Signed-off-by: Weqaar Janjua <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/xdpsock_user.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c
index c91e91362a0c6..0151bb0b2fc71 100644
--- a/samples/bpf/xdpsock_user.c
+++ b/samples/bpf/xdpsock_user.c
@@ -921,7 +921,7 @@ static void rx_drop_all(void)
}
}
-static void tx_only(struct xsk_socket_info *xsk, u32 frame_nb, int batch_size)
+static void tx_only(struct xsk_socket_info *xsk, u32 *frame_nb, int batch_size)
{
u32 idx;
unsigned int i;
@@ -934,14 +934,14 @@ static void tx_only(struct xsk_socket_info *xsk, u32 frame_nb, int batch_size)
for (i = 0; i < batch_size; i++) {
struct xdp_desc *tx_desc = xsk_ring_prod__tx_desc(&xsk->tx,
idx + i);
- tx_desc->addr = (frame_nb + i) << XSK_UMEM__DEFAULT_FRAME_SHIFT;
+ tx_desc->addr = (*frame_nb + i) << XSK_UMEM__DEFAULT_FRAME_SHIFT;
tx_desc->len = PKT_SIZE;
}
xsk_ring_prod__submit(&xsk->tx, batch_size);
xsk->outstanding_tx += batch_size;
- frame_nb += batch_size;
- frame_nb %= NUM_FRAMES;
+ *frame_nb += batch_size;
+ *frame_nb %= NUM_FRAMES;
complete_tx_only(xsk, batch_size);
}
@@ -997,7 +997,7 @@ static void tx_only_all(void)
}
for (i = 0; i < num_socks; i++)
- tx_only(xsks[i], frame_nb[i], batch_size);
+ tx_only(xsks[i], &frame_nb[i], batch_size);
pkt_cnt += batch_size;
--
2.25.1
From: Michał Mirosław <[email protected]>
[ Upstream commit aea6cb99703e17019e025aa71643b4d3e0a24413 ]
When creating a new regulator its supply cannot create the sysfs link
because the device is not yet published. Remove early supply resolving
since it will be done later anyway. This makes the following error
disappear and the symlinks get created instead.
DCDC_REG1: supplied by VSYS
VSYS: could not add device link regulator.3 err -2
Note: It doesn't fix the problem for bypassed regulators, though.
Fixes: 45389c47526d ("regulator: core: Add early supply resolution for regulators")
Signed-off-by: Michał Mirosław <[email protected]>
Link: https://lore.kernel.org/r/ba09e0a8617ffeeb25cb4affffe6f3149319cef8.1601155770.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/core.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index be8c709a74883..25e601bf9383e 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -5187,15 +5187,20 @@ regulator_register(const struct regulator_desc *regulator_desc,
else if (regulator_desc->supply_name)
rdev->supply_name = regulator_desc->supply_name;
- /*
- * Attempt to resolve the regulator supply, if specified,
- * but don't return an error if we fail because we will try
- * to resolve it again later as more regulators are added.
- */
- if (regulator_resolve_supply(rdev))
- rdev_dbg(rdev, "unable to resolve supply\n");
-
ret = set_machine_constraints(rdev, constraints);
+ if (ret == -EPROBE_DEFER) {
+ /* Regulator might be in bypass mode and so needs its supply
+ * to set the constraints */
+ /* FIXME: this currently triggers a chicken-and-egg problem
+ * when creating -SUPPLY symlink in sysfs to a regulator
+ * that is just being created */
+ ret = regulator_resolve_supply(rdev);
+ if (!ret)
+ ret = set_machine_constraints(rdev, constraints);
+ else
+ rdev_dbg(rdev, "unable to resolve supply early: %pe\n",
+ ERR_PTR(ret));
+ }
if (ret < 0)
goto wash;
--
2.25.1
From: Alex Dewar <[email protected]>
[ Upstream commit 90ca6333fd65f318c47bff425e1ea36c0a5539f6 ]
In a couple of places in qp_host_get_user_memory(),
get_user_pages_fast() is called without properly checking for errors. If
e.g. -EFAULT is returned, this negative value will then be passed on to
qp_release_pages(), which expects a u64 as input.
Fix this by only calling qp_release_pages() when we have a positive
number returned.
Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Signed-off-by: Alex Dewar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c
index 8531ae7811956..c49065887e8f5 100644
--- a/drivers/misc/vmw_vmci/vmci_queue_pair.c
+++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c
@@ -657,8 +657,9 @@ static int qp_host_get_user_memory(u64 produce_uva,
if (retval < (int)produce_q->kernel_if->num_pages) {
pr_debug("get_user_pages_fast(produce) failed (retval=%d)",
retval);
- qp_release_pages(produce_q->kernel_if->u.h.header_page,
- retval, false);
+ if (retval > 0)
+ qp_release_pages(produce_q->kernel_if->u.h.header_page,
+ retval, false);
err = VMCI_ERROR_NO_MEM;
goto out;
}
@@ -670,8 +671,9 @@ static int qp_host_get_user_memory(u64 produce_uva,
if (retval < (int)consume_q->kernel_if->num_pages) {
pr_debug("get_user_pages_fast(consume) failed (retval=%d)",
retval);
- qp_release_pages(consume_q->kernel_if->u.h.header_page,
- retval, false);
+ if (retval > 0)
+ qp_release_pages(consume_q->kernel_if->u.h.header_page,
+ retval, false);
qp_release_pages(produce_q->kernel_if->u.h.header_page,
produce_q->kernel_if->num_pages, false);
err = VMCI_ERROR_NO_MEM;
--
2.25.1
From: Tom Rix <[email protected]>
[ Upstream commit ad6f93e9cd56f0b10e9b22e3e137d17a1a035242 ]
Clang static analysis reports this representative error
init.c:2501:18: warning: Array access (from variable 'queuedata') results
in a null pointer dereference
templ |= ((queuedata[i] & 0xc0) << 3);
This is the problem block of code
if(ModeNo > 0x13) {
...
if(SiS_Pr->ChipType == SIS_730) {
queuedata = &FQBQData730[0];
} else {
queuedata = &FQBQData[0];
}
} else {
}
queuedata is not set in the else block
Reviewing the old code, the arrays FQBQData730 and FQBQData were
used directly.
So hoist the setting of queuedata out of the if-else block.
Fixes: 544393fe584d ("[PATCH] sisfb update")
Signed-off-by: Tom Rix <[email protected]>
Cc: Thomas Winischhofer <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/sis/init.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/video/fbdev/sis/init.c b/drivers/video/fbdev/sis/init.c
index dfe3eb769638b..fde27feae5d0c 100644
--- a/drivers/video/fbdev/sis/init.c
+++ b/drivers/video/fbdev/sis/init.c
@@ -2428,6 +2428,11 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
i = 0;
+ if (SiS_Pr->ChipType == SIS_730)
+ queuedata = &FQBQData730[0];
+ else
+ queuedata = &FQBQData[0];
+
if(ModeNo > 0x13) {
/* Get VCLK */
@@ -2445,12 +2450,6 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
/* Get half colordepth */
colorth = colortharray[(SiS_Pr->SiS_ModeType - ModeEGA)];
- if(SiS_Pr->ChipType == SIS_730) {
- queuedata = &FQBQData730[0];
- } else {
- queuedata = &FQBQData[0];
- }
-
do {
templ = SiS_CalcDelay2(SiS_Pr, queuedata[i]) * VCLK * colorth;
--
2.25.1
From: Abhishek Pandit-Subedi <[email protected]>
[ Upstream commit 0e9952804ec9c8ba60f131225eab80634339f042 ]
While unregistering, make sure to clear the suspend tasks before
cancelling the work. If the unregister is called during resume from
suspend, this will unnecessarily add 2s to the resume time otherwise.
Fixes: 4e8c36c3b0d73d (Bluetooth: Fix suspend notifier race)
Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_core.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index fc28dc201b936..0f4e5a31f983c 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3280,6 +3280,16 @@ void hci_copy_identity_address(struct hci_dev *hdev, bdaddr_t *bdaddr,
}
}
+static void hci_suspend_clear_tasks(struct hci_dev *hdev)
+{
+ int i;
+
+ for (i = 0; i < __SUSPEND_NUM_TASKS; i++)
+ clear_bit(i, hdev->suspend_tasks);
+
+ wake_up(&hdev->suspend_wait_q);
+}
+
static int hci_suspend_wait_event(struct hci_dev *hdev)
{
#define WAKE_COND \
@@ -3609,6 +3619,7 @@ void hci_unregister_dev(struct hci_dev *hdev)
cancel_work_sync(&hdev->power_on);
unregister_pm_notifier(&hdev->suspend_notifier);
+ hci_suspend_clear_tasks(hdev);
cancel_work_sync(&hdev->suspend_prepare);
hci_dev_do_close(hdev);
--
2.25.1
From: Jann Horn <[email protected]>
[ Upstream commit e8b8ae7ce32e17a5c29f0289e9e2a39c7dcaa1b8 ]
While binder transactions with the same binder_proc as sender and recipient
are forbidden, transactions with the same task_struct as sender and
recipient are possible (even though currently there is a weird check in
binder_transaction() that rejects them in the target==0 case).
Therefore, task_struct identities can't be used to distinguish whether
the caller is running in the context of the sender or the recipient.
Since I see no easy way to make this WARN_ON() useful and correct, let's
just remove it.
Fixes: 44d8047f1d87 ("binder: use standard functions to allocate fds")
Reported-by: [email protected]
Acked-by: Christian Brauner <[email protected]>
Acked-by: Todd Kjos <[email protected]>
Signed-off-by: Jann Horn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/android/binder.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index af85d37aef680..adab46ca5dff7 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2324,8 +2324,6 @@ static void binder_transaction_buffer_release(struct binder_proc *proc,
* file is done when the transaction is torn
* down.
*/
- WARN_ON(failed_at &&
- proc->tsk == current->group_leader);
} break;
case BINDER_TYPE_PTR:
/*
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 650b323c8e7c3ac4830a20895b1d444fd68dd787 ]
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.
[mkp: removed memset() hunk that has already been addressed]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index fdb2ce7acb912..9f5d3aa1d8745 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -4908,7 +4908,7 @@ qla25xx_set_els_cmds_supported(scsi_qla_host_t *vha)
"Done %s.\n", __func__);
}
- dma_free_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
+ dma_free_coherent(&ha->pdev->dev, ELS_CMD_MAP_SIZE,
els_cmd_map, els_cmd_map_dma);
return rval;
--
2.25.1
From: Kees Cook <[email protected]>
[ Upstream commit d00451c8118f8f7ab8e057bc6ee2f8b7d70b6a1c ]
Instead of full GNU diff (which smaller boot environments may not have),
use "comm" which is more available.
Reported-by: Naresh Kamboju <[email protected]>
Cc: [email protected]
Fixes: f131d9edc29d ("selftests/lkdtm: Don't clear dmesg when running tests")
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/lkdtm/run.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/lkdtm/run.sh b/tools/testing/selftests/lkdtm/run.sh
index 8383eb89d88a9..bb7a1775307b8 100755
--- a/tools/testing/selftests/lkdtm/run.sh
+++ b/tools/testing/selftests/lkdtm/run.sh
@@ -82,7 +82,7 @@ dmesg > "$DMESG"
($SHELL -c 'cat <(echo '"$test"') >'"$TRIGGER" 2>/dev/null) || true
# Record and dump the results
-dmesg | diff --changed-group-format='%>' --unchanged-group-format='' "$DMESG" - > "$LOG" || true
+dmesg | comm --nocheck-order -13 "$DMESG" - > "$LOG" || true
cat "$LOG"
# Check for expected output
--
2.25.1
From: Mike Leach <[email protected]>
[ Upstream commit 096dcfb9cd6fefa7c03884b50c247593dc5f7dd3 ]
Moving from using an address filter to trace the default "all addresses"
range to no filtering to acheive the same result, has caused the perf
filtering of kernel/user address spaces from not working unless an
explicit address filter was used.
This is due to the original code using a side-effect of the address
filtering rather than setting the global TRCVICTLR exception level
filtering.
The use of the mode sysfs file is also similarly affected.
A helper function is added to fix both instances.
Fixes: ae2041510d5d ("coresight: etmv4: Update default filter and initialisation")
Reported-by: Leo Yan <[email protected]>
Tested-by: Leo Yan <[email protected]>
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: Mike Leach <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 32 +++++++++++++------
drivers/hwtracing/coresight/coresight-etm4x.h | 3 ++
2 files changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index a970bd17edf8d..7a247273b7e0a 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -52,6 +52,7 @@ static struct etmv4_drvdata *etmdrvdata[NR_CPUS];
static void etm4_set_default_config(struct etmv4_config *config);
static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
struct perf_event *event);
+static u64 etm4_get_access_type(struct etmv4_config *config);
static enum cpuhp_state hp_online;
@@ -779,6 +780,22 @@ static void etm4_init_arch_data(void *info)
CS_LOCK(drvdata->base);
}
+/* Set ELx trace filter access in the TRCVICTLR register */
+static void etm4_set_victlr_access(struct etmv4_config *config)
+{
+ u64 access_type;
+
+ config->vinst_ctrl &= ~(ETM_EXLEVEL_S_VICTLR_MASK | ETM_EXLEVEL_NS_VICTLR_MASK);
+
+ /*
+ * TRCVICTLR::EXLEVEL_NS:EXLEVELS: Set kernel / user filtering
+ * bits in vinst_ctrl, same bit pattern as TRCACATRn values returned by
+ * etm4_get_access_type() but with a relative shift in this register.
+ */
+ access_type = etm4_get_access_type(config) << ETM_EXLEVEL_LSHIFT_TRCVICTLR;
+ config->vinst_ctrl |= (u32)access_type;
+}
+
static void etm4_set_default_config(struct etmv4_config *config)
{
/* disable all events tracing */
@@ -796,6 +813,9 @@ static void etm4_set_default_config(struct etmv4_config *config)
/* TRCVICTLR::EVENT = 0x01, select the always on logic */
config->vinst_ctrl = BIT(0);
+
+ /* TRCVICTLR::EXLEVEL_NS:EXLEVELS: Set kernel / user filtering */
+ etm4_set_victlr_access(config);
}
static u64 etm4_get_ns_access_type(struct etmv4_config *config)
@@ -1060,7 +1080,7 @@ static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
void etm4_config_trace_mode(struct etmv4_config *config)
{
- u32 addr_acc, mode;
+ u32 mode;
mode = config->mode;
mode &= (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER);
@@ -1072,15 +1092,7 @@ void etm4_config_trace_mode(struct etmv4_config *config)
if (!(mode & ETM_MODE_EXCL_KERN) && !(mode & ETM_MODE_EXCL_USER))
return;
- addr_acc = config->addr_acc[ETM_DEFAULT_ADDR_COMP];
- /* clear default config */
- addr_acc &= ~(ETM_EXLEVEL_NS_APP | ETM_EXLEVEL_NS_OS |
- ETM_EXLEVEL_NS_HYP);
-
- addr_acc |= etm4_get_ns_access_type(config);
-
- config->addr_acc[ETM_DEFAULT_ADDR_COMP] = addr_acc;
- config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = addr_acc;
+ etm4_set_victlr_access(config);
}
static int etm4_online_cpu(unsigned int cpu)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 47729e04aac72..ab38f9afd821a 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -192,6 +192,9 @@
#define ETM_EXLEVEL_NS_HYP BIT(14)
#define ETM_EXLEVEL_NS_NA BIT(15)
+/* access level control in TRCVICTLR - same bits as TRCACATRn but shifted */
+#define ETM_EXLEVEL_LSHIFT_TRCVICTLR 8
+
/* secure / non secure masks - TRCVICTLR, IDR3 */
#define ETM_EXLEVEL_S_VICTLR_MASK GENMASK(19, 16)
/* NS MON (EL3) mode never implemented */
--
2.25.1
From: Jonathan Zhou <[email protected]>
[ Upstream commit 4020fc8d4658dc1dbc27c5644bcb6254caa05e5e ]
The member @nr_addr_cmp is not a bool value, using operator '>'
instead to avoid unexpected failure.
Fixes: a77de2637c9e ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: Mathieu Poirier <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Shaokun Zhang <[email protected]>
Signed-off-by: Jonathan Zhou <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index b673e738bc9a8..a588cd6de01c7 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -206,7 +206,7 @@ static ssize_t reset_store(struct device *dev,
* each trace run.
*/
config->vinst_ctrl = BIT(0);
- if (drvdata->nr_addr_cmp == true) {
+ if (drvdata->nr_addr_cmp > 0) {
config->mode |= ETM_MODE_VIEWINST_STARTSTOP;
/* SSSTATUS, bit[9] */
config->vinst_ctrl |= BIT(9);
--
2.25.1
From: Jonathan Zhou <[email protected]>
[ Upstream commit 4cd83037cd957ad97756055355ab4ee63f259380 ]
The TRCSEQEVR(3) is reserved, using '@nrseqstate - 1' instead to avoid
accessing the reserved register.
Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states")
Cc: Mathieu Poirier <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Shaokun Zhang <[email protected]>
Signed-off-by: Jonathan Zhou <[email protected]>
[Fixed capital letter in title]
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 7a247273b7e0a..d6395aeffd99d 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -1189,7 +1189,7 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
state->trcvdsacctlr = readl(drvdata->base + TRCVDSACCTLR);
state->trcvdarcctlr = readl(drvdata->base + TRCVDARCCTLR);
- for (i = 0; i < drvdata->nrseqstate; i++)
+ for (i = 0; i < drvdata->nrseqstate - 1; i++)
state->trcseqevr[i] = readl(drvdata->base + TRCSEQEVRn(i));
state->trcseqrstevr = readl(drvdata->base + TRCSEQRSTEVR);
@@ -1294,7 +1294,7 @@ static void etm4_cpu_restore(struct etmv4_drvdata *drvdata)
writel_relaxed(state->trcvdsacctlr, drvdata->base + TRCVDSACCTLR);
writel_relaxed(state->trcvdarcctlr, drvdata->base + TRCVDARCCTLR);
- for (i = 0; i < drvdata->nrseqstate; i++)
+ for (i = 0; i < drvdata->nrseqstate - 1; i++)
writel_relaxed(state->trcseqevr[i],
drvdata->base + TRCSEQEVRn(i));
--
2.25.1
From: Matthieu Baerts <[email protected]>
[ Upstream commit 8b974778f998ab1be23eca7436fc13d2d8c6bd59 ]
In case of errors, this message was printed:
(...)
# read: Resource temporarily unavailable
# client exit code 0, server 3
# \nnetns ns1-0-BJlt5D socket stat for 10003:
(...)
Obviously, the idea was to add a new line before the socket stat and not
print "\nnetns".
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Signed-off-by: Matthieu Baerts <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/mptcp/mptcp_connect.sh | 4 ++--
tools/testing/selftests/net/mptcp/mptcp_join.sh | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index acf02e156d20f..ed163e4ad4344 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -421,9 +421,9 @@ do_transfer()
duration=$(printf "(duration %05sms)" $duration)
if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
echo "$duration [ FAIL ] client exit code $retc, server $rets" 1>&2
- echo "\nnetns ${listener_ns} socket stat for $port:" 1>&2
+ echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
ip netns exec ${listener_ns} ss -nita 1>&2 -o "sport = :$port"
- echo "\nnetns ${connector_ns} socket stat for $port:" 1>&2
+ echo -e "\nnetns ${connector_ns} socket stat for ${port}:" 1>&2
ip netns exec ${connector_ns} ss -nita 1>&2 -o "dport = :$port"
cat "$capout"
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index dd42c2f692d01..9cb0c6af326ba 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -167,9 +167,9 @@ do_transfer()
if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
echo " client exit code $retc, server $rets" 1>&2
- echo "\nnetns ${listener_ns} socket stat for $port:" 1>&2
+ echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
ip netns exec ${listener_ns} ss -nita 1>&2 -o "sport = :$port"
- echo "\nnetns ${connector_ns} socket stat for $port:" 1>&2
+ echo -e "\nnetns ${connector_ns} socket stat for ${port}:" 1>&2
ip netns exec ${connector_ns} ss -nita 1>&2 -o "dport = :$port"
cat "$capout"
--
2.25.1
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 6788fc1a66a0c1d1cec7a0f84f94b517eae8611c ]
When CONFIG_SND_CTL_VALIDATION is set, accesses to extended bytes
control generate spurious error messages when the size exceeds 512
bytes, such as
[ 11.224223] sof_sdw sof_sdw: control 2:0:0:EQIIR5.0 eqiir_coef_5:0:
invalid count 1024
In addition the error check returns -EINVAL which has the nasty side
effect of preventing applications accessing controls from working,
e.g.
root@plb:~# alsamixer
cannot load mixer controls: Invalid argument
It's agreed that the control interface has been abused since 2014, but
forcing a check should not prevent existing solutions from working.
This patch skips the checks conditionally if CONFIG_SND_CTL_VALIDATION
is set and the byte array provided by topology is > 512. This
preserves the checks for all other cases.
Fixes: 1a3232d2f61d2 ('ASoC: topology: Add support for TLV bytes controls')
BugLink: https://github.com/thesofproject/linux/issues/2430
Reported-by: Takashi Iwai <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Jaska Uimonen <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-topology.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 6eaa00c210117..a5460155b3f64 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -592,6 +592,17 @@ static int soc_tplg_kcontrol_bind_io(struct snd_soc_tplg_ctl_hdr *hdr,
k->info = snd_soc_bytes_info_ext;
k->tlv.c = snd_soc_bytes_tlv_callback;
+ /*
+ * When a topology-based implementation abuses the
+ * control interface and uses bytes_ext controls of
+ * more than 512 bytes, we need to disable the size
+ * checks, otherwise accesses to such controls will
+ * return an -EINVAL error and prevent the card from
+ * being configured.
+ */
+ if (IS_ENABLED(CONFIG_SND_CTL_VALIDATION) && sbe->max > 512)
+ k->access |= SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK;
+
ext_ops = tplg->bytes_ext_ops;
num_ops = tplg->bytes_ext_ops_count;
for (i = 0; i < num_ops; i++) {
--
2.25.1
From: Mathias Nyman <[email protected]>
[ Upstream commit 167657a1bb5fcde53ac304ce6c564bd90a2f9185 ]
Make sure xHC completes the configure endpoint command and xhci driver
sets the ring pointers correctly before we create the user readable
debugfs file.
In theory there was a small gap where a user could have read the
debugfs file and cause a NULL pointer dereference error as ring
pointer was not yet set, in practise we want this change to simplify
the upcoming streams debugfs support.
Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver")
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/xhci.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 113ab5d3cbfe5..f665da34a8f73 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1915,8 +1915,6 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
trace_xhci_add_endpoint(ep_ctx);
- xhci_debugfs_create_endpoint(xhci, virt_dev, ep_index);
-
xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
udev->slot_id,
@@ -2949,6 +2947,7 @@ static int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
virt_dev->eps[i].new_ring = NULL;
+ xhci_debugfs_create_endpoint(xhci, virt_dev, i);
}
command_cleanup:
kfree(command->completion);
--
2.25.1
From: Eran Ben Elisha <[email protected]>
[ Upstream commit 0d2ffdc8d4002a62de31ff7aa3bef28c843c3cbe ]
Before calling timecounter_cyc2time(), clock->lock must be taken.
Use mlx5_timecounter_cyc2time instead which guarantees a safe access.
Fixes: afc98a0b46d8 ("net/mlx5: Update ptp_clock_event foreach PPS event")
Signed-off-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
index 2d55b7c22c034..4e7cfa22b3d2f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
@@ -550,8 +550,9 @@ static int mlx5_pps_event(struct notifier_block *nb,
switch (clock->ptp_info.pin_config[pin].func) {
case PTP_PF_EXTTS:
ptp_event.index = pin;
- ptp_event.timestamp = timecounter_cyc2time(&clock->tc,
- be64_to_cpu(eqe->data.pps.time_stamp));
+ ptp_event.timestamp =
+ mlx5_timecounter_cyc2time(clock,
+ be64_to_cpu(eqe->data.pps.time_stamp));
if (clock->pps_info.enabled) {
ptp_event.type = PTP_CLOCK_PPSUSR;
ptp_event.pps_times.ts_real =
--
2.25.1
From: Linus Walleij <[email protected]>
[ Upstream commit 3dfe8dde093a07e82fa472c0f8c29a7f6a2006a5 ]
We go to lengths to determine whether the PVID should be set
for this port or not, and then fail to take it into account.
Fix this oversight.
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/rtl8366.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index b941d45edd641..49c626a336803 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -436,6 +436,9 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port,
"failed to set up VLAN %04x",
vid);
+ if (!pvid)
+ continue;
+
ret = rtl8366_set_pvid(smi, port, vid);
if (ret)
dev_err(smi->dev,
--
2.25.1
From: Dan Murphy <[email protected]>
[ Upstream commit d3d71c99b541040da198f43da3bbd85d8e9598cb ]
Fix the unbalanced call to the pm_runtime_disable when removing the
module. pm_runtime_enable is not called nor is the pm_runtime setup in
the code. Remove the i2c_remove function and the pm_runtime_disable.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/tas2770.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 8d88ed5578ddd..531bf32043813 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -16,7 +16,6 @@
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
-#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/firmware.h>
#include <linux/regmap.h>
@@ -780,13 +779,6 @@ static int tas2770_i2c_probe(struct i2c_client *client,
return result;
}
-static int tas2770_i2c_remove(struct i2c_client *client)
-{
- pm_runtime_disable(&client->dev);
- return 0;
-}
-
-
static const struct i2c_device_id tas2770_i2c_id[] = {
{ "tas2770", 0},
{ }
@@ -807,7 +799,6 @@ static struct i2c_driver tas2770_i2c_driver = {
.of_match_table = of_match_ptr(tas2770_of_match),
},
.probe = tas2770_i2c_probe,
- .remove = tas2770_i2c_remove,
.id_table = tas2770_i2c_id,
};
--
2.25.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 2a32dbdc2c7db5463483fa01fb220fd1b770c6bc ]
The reference to the VSP device acquired with of_find_device_by_node()
in rcar_du_vsp_init() is never released. Fix it with a drmm action,
which gets run both in the probe error path and in the remove path.
Fixes: 6d62ef3ac30b ("drm: rcar-du: Expose the VSP1 compositor through KMS planes")
Reported-by: Yu Kuai <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
index f1a81c9b184d4..fa09b3ae8b9d4 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
@@ -13,6 +13,7 @@
#include <drm/drm_fourcc.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_vblank.h>
@@ -341,6 +342,13 @@ static const struct drm_plane_funcs rcar_du_vsp_plane_funcs = {
.atomic_destroy_state = rcar_du_vsp_plane_atomic_destroy_state,
};
+static void rcar_du_vsp_cleanup(struct drm_device *dev, void *res)
+{
+ struct rcar_du_vsp *vsp = res;
+
+ put_device(vsp->vsp);
+}
+
int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
unsigned int crtcs)
{
@@ -357,6 +365,10 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
vsp->vsp = &pdev->dev;
+ ret = drmm_add_action(rcdu->ddev, rcar_du_vsp_cleanup, vsp);
+ if (ret < 0)
+ return ret;
+
ret = vsp1_du_init(vsp->vsp);
if (ret < 0)
return ret;
--
2.25.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit b28de385b71abf31ce68ec0387638bee26ae9024 ]
After writing a garbage to the channel we get an Oops in dmatest_chan_set()
due to access to last entry in the empty list.
[ 212.670672] BUG: unable to handle page fault for address: fffffff000000020
[ 212.677562] #PF: supervisor read access in kernel mode
[ 212.682702] #PF: error_code(0x0000) - not-present page
...
[ 212.710074] RIP: 0010:dmatest_chan_set+0x149/0x2d0 [dmatest]
[ 212.715739] Code: e8 cc f9 ff ff 48 8b 1d 0d 55 00 00 48 83 7b 10 00 0f 84 63 01 00 00 48 c7 c7 d0 65 4d c0 e8 ee 4a f5 e1 48 89 c6 48 8b 43 10 <48> 8b 40 20 48 8b 78 58 48 85 ff 0f 84 f5 00 00 00 e8 b1 41 f5 e1
Fix this by checking list for emptiness before accessing its last entry.
Fixes: d53513d5dc28 ("dmaengine: dmatest: Add support for multi channel testing")
Cc: Vladimir Murzin <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Tested-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/dmatest.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 323822372b4ce..7480fc1042093 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -1240,15 +1240,14 @@ static int dmatest_chan_set(const char *val, const struct kernel_param *kp)
add_threaded_test(info);
/* Check if channel was added successfully */
- dtc = list_last_entry(&info->channels, struct dmatest_chan, node);
-
- if (dtc->chan) {
+ if (!list_empty(&info->channels)) {
/*
* if new channel was not successfully added, revert the
* "test_channel" string to the name of the last successfully
* added channel. exception for when users issues empty string
* to channel parameter.
*/
+ dtc = list_last_entry(&info->channels, struct dmatest_chan, node);
if ((strcmp(dma_chan_name(dtc->chan), strim(test_channel)) != 0)
&& (strcmp("", strim(test_channel)) != 0)) {
ret = -EINVAL;
--
2.25.1
From: Necip Fazil Yildiran <[email protected]>
[ Upstream commit 50b18e4a2608e3897f3787eaa7dfa869b40d9923 ]
When SND_SOC_CROS_EC_CODEC is enabled and CRYPTO is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- SND_SOC_CROS_EC_CODEC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && CROS_EC [=y]
The reason is that SND_SOC_CROS_EC_CODEC selects CRYPTO_LIB_SHA256 without
depending on or selecting CRYPTO while CRYPTO_LIB_SHA256 is subordinate to
CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: 93fa0af4790a ("ASoC: cros_ec_codec: switch to library API for SHA-256")
Signed-off-by: Necip Fazil Yildiran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 986a6308818b2..2a8484f37496c 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -539,6 +539,7 @@ config SND_SOC_CQ0093VC
config SND_SOC_CROS_EC_CODEC
tristate "codec driver for ChromeOS EC"
depends on CROS_EC
+ select CRYPTO
select CRYPTO_LIB_SHA256
help
If you say yes here you will get support for the
--
2.25.1
From: Dan Murphy <[email protected]>
[ Upstream commit b0bcbe615756d5923eec4e95996e4041627e5741 ]
tas2770_reset is called during i2c probe. The reset calls the
snd_soc_component_write which depends on the tas2770->component being
available. The component pointer is not set until codec_probe so move
the reset to the codec_probe after the pointer is set.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/tas2770.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index cf071121c8398..9f759c51ca435 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -574,6 +574,8 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
tas2770->component = component;
+ tas2770_reset(tas2770);
+
return 0;
}
@@ -770,8 +772,6 @@ static int tas2770_i2c_probe(struct i2c_client *client,
tas2770->channel_size = 0;
tas2770->slot_width = 0;
- tas2770_reset(tas2770);
-
result = tas2770_register_codec(tas2770);
if (result)
dev_err(tas2770->dev, "Register codec failed.\n");
--
2.25.1
From: Bo YU <[email protected]>
[ Upstream commit 80b892fc8a90e91498babf0f6817139e5ec64b5c ]
Return value form wait_for_completion_timeout should to be checked.
This is detected by Coverity: #CID:1464479 (CHECKED_RETURN)
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Bo YU <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/ahb.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 30092841ac464..a0314c1c84653 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -981,12 +981,16 @@ static int ath11k_ahb_probe(struct platform_device *pdev)
static int ath11k_ahb_remove(struct platform_device *pdev)
{
struct ath11k_base *ab = platform_get_drvdata(pdev);
+ unsigned long left;
reinit_completion(&ab->driver_recovery);
- if (test_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags))
- wait_for_completion_timeout(&ab->driver_recovery,
- ATH11K_AHB_RECOVERY_TIMEOUT);
+ if (test_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags)) {
+ left = wait_for_completion_timeout(&ab->driver_recovery,
+ ATH11K_AHB_RECOVERY_TIMEOUT);
+ if (!left)
+ ath11k_warn(ab, "failed to receive recovery response completion\n");
+ }
set_bit(ATH11K_FLAG_UNREGISTERING, &ab->dev_flags);
cancel_work_sync(&ab->restart_work);
--
2.25.1
From: Yang Yingliang <[email protected]>
[ Upstream commit 75fc65079d8253e1c25a5f8348111a85d71e0f01 ]
aarch64-linux-gnu-ld: drivers/tty/hvc/hvc_dcc.o: in function `dcc_early_write':
hvc_dcc.c:(.text+0x164): undefined reference to `uart_console_write'
The driver uses the uart_console_write(), but SERIAL_CORE_CONSOLE is not
selected, so uart_console_write is not defined, then we get the error.
Fix this by selecting SERIAL_CORE_CONSOLE.
Fixes: d1a1af2cdf19 ("hvc: dcc: Add earlycon support")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/hvc/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index d1b27b0522a3c..8d60e0ff67b4d 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -81,6 +81,7 @@ config HVC_DCC
bool "ARM JTAG DCC console"
depends on ARM || ARM64
select HVC_DRIVER
+ select SERIAL_CORE_CONSOLE
help
This console uses the JTAG DCC on ARM to create a console under the HVC
driver. This console is used through a JTAG only on ARM. If you don't have
--
2.25.1
From: Vadym Kochan <[email protected]>
[ Upstream commit fc9eec4d643597cf4cb2fef17d48110e677610da ]
Fix missing 'kfree_const(cell->name)' when call to
nvmem_cell_info_to_nvmem_cell() in several places:
* after nvmem_cell_info_to_nvmem_cell() failed during
nvmem_add_cells()
* during nvmem_device_cell_{read,write} when cell->name is
kstrdup'ed() without calling kfree_const() at the end, but
really there is no reason to do that 'dup, because the cell
instance is allocated on the stack for some short period to be
read/write without exposing it to the caller.
So the new nvmem_cell_info_to_nvmem_cell_nodup() helper is introduced
which is used to convert cell_info -> cell without name duplication as
a lighweight version of nvmem_cell_info_to_nvmem_cell().
Fixes: e2a5402ec7c6 ("nvmem: Add nvmem_device based consumer apis.")
Reviewed-by: Srinivas Kandagatla <[email protected]>
Acked-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Vadym Kochan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvmem/core.c | 33 ++++++++++++++++++++++++---------
1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 394e75dede725..4aca5b4a87d75 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -355,16 +355,14 @@ static void nvmem_cell_add(struct nvmem_cell *cell)
blocking_notifier_call_chain(&nvmem_notifier, NVMEM_CELL_ADD, cell);
}
-static int nvmem_cell_info_to_nvmem_cell(struct nvmem_device *nvmem,
- const struct nvmem_cell_info *info,
- struct nvmem_cell *cell)
+static int nvmem_cell_info_to_nvmem_cell_nodup(struct nvmem_device *nvmem,
+ const struct nvmem_cell_info *info,
+ struct nvmem_cell *cell)
{
cell->nvmem = nvmem;
cell->offset = info->offset;
cell->bytes = info->bytes;
- cell->name = kstrdup_const(info->name, GFP_KERNEL);
- if (!cell->name)
- return -ENOMEM;
+ cell->name = info->name;
cell->bit_offset = info->bit_offset;
cell->nbits = info->nbits;
@@ -376,13 +374,30 @@ static int nvmem_cell_info_to_nvmem_cell(struct nvmem_device *nvmem,
if (!IS_ALIGNED(cell->offset, nvmem->stride)) {
dev_err(&nvmem->dev,
"cell %s unaligned to nvmem stride %d\n",
- cell->name, nvmem->stride);
+ cell->name ?: "<unknown>", nvmem->stride);
return -EINVAL;
}
return 0;
}
+static int nvmem_cell_info_to_nvmem_cell(struct nvmem_device *nvmem,
+ const struct nvmem_cell_info *info,
+ struct nvmem_cell *cell)
+{
+ int err;
+
+ err = nvmem_cell_info_to_nvmem_cell_nodup(nvmem, info, cell);
+ if (err)
+ return err;
+
+ cell->name = kstrdup_const(info->name, GFP_KERNEL);
+ if (!cell->name)
+ return -ENOMEM;
+
+ return 0;
+}
+
/**
* nvmem_add_cells() - Add cell information to an nvmem device
*
@@ -1436,7 +1451,7 @@ ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem,
if (!nvmem)
return -EINVAL;
- rc = nvmem_cell_info_to_nvmem_cell(nvmem, info, &cell);
+ rc = nvmem_cell_info_to_nvmem_cell_nodup(nvmem, info, &cell);
if (rc)
return rc;
@@ -1466,7 +1481,7 @@ int nvmem_device_cell_write(struct nvmem_device *nvmem,
if (!nvmem)
return -EINVAL;
- rc = nvmem_cell_info_to_nvmem_cell(nvmem, info, &cell);
+ rc = nvmem_cell_info_to_nvmem_cell_nodup(nvmem, info, &cell);
if (rc)
return rc;
--
2.25.1
From: Souptick Joarder <[email protected]>
[ Upstream commit a81072a9c0ae734b7889929b0bc070fe3f353f0e ]
Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it
will call pin_user_pages_fast() to map nr_pages. However,
pin_user_pages_fast() might fail with a return value -ERRNO.
The return value is stored in pinned_pages->nr_pages. which in
turn is passed to unpin_user_pages(), which expects
pinned_pages->nr_pages >=0, else disaster.
Fix this by assigning pinned_pages->nr_pages to 0 if
pin_user_pages_fast() returns -ERRNO.
Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration")
Cc: John Hubbard <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Dan Carpenter <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Signed-off-by: Souptick Joarder <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/mic/scif/scif_rma.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/mic/scif/scif_rma.c b/drivers/misc/mic/scif/scif_rma.c
index 406cd5abfa726..56c784699eb8e 100644
--- a/drivers/misc/mic/scif/scif_rma.c
+++ b/drivers/misc/mic/scif/scif_rma.c
@@ -1384,6 +1384,8 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
(prot & SCIF_PROT_WRITE) ? FOLL_WRITE : 0,
pinned_pages->pages);
if (nr_pages != pinned_pages->nr_pages) {
+ if (pinned_pages->nr_pages < 0)
+ pinned_pages->nr_pages = 0;
if (try_upgrade) {
if (ulimit)
__scif_dec_pinned_vm_lock(mm, nr_pages);
@@ -1400,7 +1402,6 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
if (pinned_pages->nr_pages < nr_pages) {
err = -EFAULT;
- pinned_pages->nr_pages = nr_pages;
goto dec_pinned;
}
@@ -1413,7 +1414,6 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
__scif_dec_pinned_vm_lock(mm, nr_pages);
/* Something went wrong! Rollback */
error_unmap:
- pinned_pages->nr_pages = nr_pages;
scif_destroy_pinned_pages(pinned_pages);
*pages = NULL;
dev_dbg(scif_info.mdev.this_device,
--
2.25.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 3d3dc274ce736227e3197868ff749cff2f175f63 ]
Freshly allocated memory contains garbage, better make sure
to init all struct v2r1_disk_dqblk fields to avoid KMSAN report:
BUG: KMSAN: uninit-value in qtree_entry_unused+0x137/0x1b0 fs/quota/quota_tree.c:218
CPU: 0 PID: 23373 Comm: syz-executor.1 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219
qtree_entry_unused+0x137/0x1b0 fs/quota/quota_tree.c:218
v2r1_mem2diskdqb+0x43d/0x710 fs/quota/quota_v2.c:285
qtree_write_dquot+0x226/0x870 fs/quota/quota_tree.c:394
v2_write_dquot+0x1ad/0x280 fs/quota/quota_v2.c:333
dquot_commit+0x4af/0x600 fs/quota/dquot.c:482
ext4_write_dquot fs/ext4/super.c:5934 [inline]
ext4_mark_dquot_dirty+0x4d8/0x6a0 fs/ext4/super.c:5985
mark_dquot_dirty fs/quota/dquot.c:347 [inline]
mark_all_dquot_dirty fs/quota/dquot.c:385 [inline]
dquot_alloc_inode+0xc05/0x12b0 fs/quota/dquot.c:1755
__ext4_new_inode+0x8204/0x9d70 fs/ext4/ialloc.c:1155
ext4_tmpfile+0x41a/0x850 fs/ext4/namei.c:2686
vfs_tmpfile+0x2a2/0x570 fs/namei.c:3283
do_tmpfile fs/namei.c:3316 [inline]
path_openat+0x4035/0x6a90 fs/namei.c:3359
do_filp_open+0x2b8/0x710 fs/namei.c:3395
do_sys_openat2+0xa88/0x1140 fs/open.c:1168
do_sys_open fs/open.c:1184 [inline]
__do_compat_sys_openat fs/open.c:1242 [inline]
__se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
__ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
__do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
RIP: 0023:0xf7ff4549
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000f55cd0cc EFLAGS: 00000296 ORIG_RAX: 0000000000000127
RAX: ffffffffffffffda RBX: 00000000ffffff9c RCX: 0000000020000000
RDX: 0000000000410481 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:143 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:126
kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:80
slab_alloc_node mm/slub.c:2907 [inline]
slab_alloc mm/slub.c:2916 [inline]
__kmalloc+0x2bb/0x4b0 mm/slub.c:3982
kmalloc include/linux/slab.h:559 [inline]
getdqbuf+0x56/0x150 fs/quota/quota_tree.c:52
qtree_write_dquot+0xf2/0x870 fs/quota/quota_tree.c:378
v2_write_dquot+0x1ad/0x280 fs/quota/quota_v2.c:333
dquot_commit+0x4af/0x600 fs/quota/dquot.c:482
ext4_write_dquot fs/ext4/super.c:5934 [inline]
ext4_mark_dquot_dirty+0x4d8/0x6a0 fs/ext4/super.c:5985
mark_dquot_dirty fs/quota/dquot.c:347 [inline]
mark_all_dquot_dirty fs/quota/dquot.c:385 [inline]
dquot_alloc_inode+0xc05/0x12b0 fs/quota/dquot.c:1755
__ext4_new_inode+0x8204/0x9d70 fs/ext4/ialloc.c:1155
ext4_tmpfile+0x41a/0x850 fs/ext4/namei.c:2686
vfs_tmpfile+0x2a2/0x570 fs/namei.c:3283
do_tmpfile fs/namei.c:3316 [inline]
path_openat+0x4035/0x6a90 fs/namei.c:3359
do_filp_open+0x2b8/0x710 fs/namei.c:3395
do_sys_openat2+0xa88/0x1140 fs/open.c:1168
do_sys_open fs/open.c:1184 [inline]
__do_compat_sys_openat fs/open.c:1242 [inline]
__se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
__ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
__do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Fixes: 498c60153ebb ("quota: Implement quota format with 64-bit space and inode limits")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Jan Kara <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/quota/quota_v2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c
index 58fc2a7c7fd19..e69a2bfdd81c0 100644
--- a/fs/quota/quota_v2.c
+++ b/fs/quota/quota_v2.c
@@ -282,6 +282,7 @@ static void v2r1_mem2diskdqb(void *dp, struct dquot *dquot)
d->dqb_curspace = cpu_to_le64(m->dqb_curspace);
d->dqb_btime = cpu_to_le64(m->dqb_btime);
d->dqb_id = cpu_to_le32(from_kqid(&init_user_ns, dquot->dq_id));
+ d->dqb_pad = 0;
if (qtree_entry_unused(info, dp))
d->dqb_itime = cpu_to_le64(1);
}
--
2.25.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit df2c471c4ae07e18a0396db670dca2ef867c5153 ]
Let the controller logic decide when to enter into clock pause mode!
Entering in to pause mode during unregistration does not really make
sense as the controller is totally going down at that point in time.
Fixes: 4b14e62ad3c9e ("slimbus: Add support for 'clock-pause' feature")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/slimbus/core.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c
index 58b63ae0e75a6..1d2bc181da050 100644
--- a/drivers/slimbus/core.c
+++ b/drivers/slimbus/core.c
@@ -301,8 +301,6 @@ int slim_unregister_controller(struct slim_controller *ctrl)
{
/* Remove all clients */
device_for_each_child(ctrl->dev, NULL, slim_ctrl_remove_device);
- /* Enter Clock Pause */
- slim_ctrl_clk_pause(ctrl, false, 0);
ida_simple_remove(&ctrl_ida, ctrl->id);
return 0;
--
2.25.1
From: Linus Walleij <[email protected]>
[ Upstream commit 7e1301ed1881447d2a25f9c6423738c33cbca133 ]
The VLANs and PVIDs on the RTL8366 utilizes a "member
configuration" (MC) which is largely unexplained in the
code.
This set-up requires a special ordering: rtl8366_set_pvid()
must be called first, followed by rtl8366_set_vlan(),
else the MC will not be properly allocated. Relax this
by factoring out the code obtaining an MC and reuse
the helper in both rtl8366_set_pvid() and
rtl8366_set_vlan() so we remove this strict ordering
requirement.
In the process, add some better comments and debug prints
so people who read the code understand what is going on.
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/realtek-smi-core.h | 4 +-
drivers/net/dsa/rtl8366.c | 273 +++++++++++++++--------------
2 files changed, 146 insertions(+), 131 deletions(-)
diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h
index 9a63b51e1d82f..6f2dab7e33d65 100644
--- a/drivers/net/dsa/realtek-smi-core.h
+++ b/drivers/net/dsa/realtek-smi-core.h
@@ -25,6 +25,9 @@ struct rtl8366_mib_counter {
const char *name;
};
+/**
+ * struct rtl8366_vlan_mc - Virtual LAN member configuration
+ */
struct rtl8366_vlan_mc {
u16 vid;
u16 untag;
@@ -119,7 +122,6 @@ int realtek_smi_setup_mdio(struct realtek_smi *smi);
int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used);
int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
u32 untag, u32 fid);
-int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val);
int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
unsigned int vid);
int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index a62d76a048dfa..b941d45edd641 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -36,12 +36,110 @@ int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used)
}
EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);
+/**
+ * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration
+ * @smi: the Realtek SMI device instance
+ * @vid: the VLAN ID to look up or allocate
+ * @vlanmc: the pointer will be assigned to a pointer to a valid member config
+ * if successful
+ * @return: index of a new member config or negative error number
+ */
+static int rtl8366_obtain_mc(struct realtek_smi *smi, int vid,
+ struct rtl8366_vlan_mc *vlanmc)
+{
+ struct rtl8366_vlan_4k vlan4k;
+ int ret;
+ int i;
+
+ /* Try to find an existing member config entry for this VID */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
+ if (ret) {
+ dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ if (vid == vlanmc->vid)
+ return i;
+ }
+
+ /* We have no MC entry for this VID, try to find an empty one */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
+ if (ret) {
+ dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ if (vlanmc->vid == 0 && vlanmc->member == 0) {
+ /* Update the entry from the 4K table */
+ ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+ if (ret) {
+ dev_err(smi->dev, "error looking for 4K VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ vlanmc->vid = vid;
+ vlanmc->member = vlan4k.member;
+ vlanmc->untag = vlan4k.untag;
+ vlanmc->fid = vlan4k.fid;
+ ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
+ if (ret) {
+ dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ dev_dbg(smi->dev, "created new MC at index %d for VID %d\n",
+ i, vid);
+ return i;
+ }
+ }
+
+ /* MC table is full, try to find an unused entry and replace it */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ int used;
+
+ ret = rtl8366_mc_is_used(smi, i, &used);
+ if (ret)
+ return ret;
+
+ if (!used) {
+ /* Update the entry from the 4K table */
+ ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+ if (ret)
+ return ret;
+
+ vlanmc->vid = vid;
+ vlanmc->member = vlan4k.member;
+ vlanmc->untag = vlan4k.untag;
+ vlanmc->fid = vlan4k.fid;
+ ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
+ if (ret) {
+ dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+ dev_dbg(smi->dev, "recycled MC at index %i for VID %d\n",
+ i, vid);
+ return i;
+ }
+ }
+
+ dev_err(smi->dev, "all VLAN member configurations are in use\n");
+ return -ENOSPC;
+}
+
int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
u32 untag, u32 fid)
{
+ struct rtl8366_vlan_mc vlanmc;
struct rtl8366_vlan_4k vlan4k;
+ int mc;
int ret;
- int i;
if (!smi->ops->is_vlan_valid(smi, vid))
return -EINVAL;
@@ -66,136 +164,58 @@ int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
"resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
vid, vlan4k.member, vlan4k.untag);
- /* Try to find an existing MC entry for this VID */
- for (i = 0; i < smi->num_vlan_mc; i++) {
- struct rtl8366_vlan_mc vlanmc;
-
- ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- if (vid == vlanmc.vid) {
- /* update the MC entry */
- vlanmc.member |= member;
- vlanmc.untag |= untag;
- vlanmc.fid = fid;
-
- ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+ /* Find or allocate a member config for this VID */
+ ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
+ if (ret < 0)
+ return ret;
+ mc = ret;
- dev_dbg(smi->dev,
- "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
- vid, vlanmc.member, vlanmc.untag);
+ /* Update the MC entry */
+ vlanmc.member |= member;
+ vlanmc.untag |= untag;
+ vlanmc.fid = fid;
- break;
- }
- }
+ /* Commit updates to the MC entry */
+ ret = smi->ops->set_vlan_mc(smi, mc, &vlanmc);
+ if (ret)
+ dev_err(smi->dev, "failed to commit changes to VLAN MC index %d for VID %d\n",
+ mc, vid);
+ else
+ dev_dbg(smi->dev,
+ "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
+ vid, vlanmc.member, vlanmc.untag);
return ret;
}
EXPORT_SYMBOL_GPL(rtl8366_set_vlan);
-int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val)
-{
- struct rtl8366_vlan_mc vlanmc;
- int ret;
- int index;
-
- ret = smi->ops->get_mc_index(smi, port, &index);
- if (ret)
- return ret;
-
- ret = smi->ops->get_vlan_mc(smi, index, &vlanmc);
- if (ret)
- return ret;
-
- *val = vlanmc.vid;
- return 0;
-}
-EXPORT_SYMBOL_GPL(rtl8366_get_pvid);
-
int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
unsigned int vid)
{
struct rtl8366_vlan_mc vlanmc;
- struct rtl8366_vlan_4k vlan4k;
+ int mc;
int ret;
- int i;
if (!smi->ops->is_vlan_valid(smi, vid))
return -EINVAL;
- /* Try to find an existing MC entry for this VID */
- for (i = 0; i < smi->num_vlan_mc; i++) {
- ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- if (vid == vlanmc.vid) {
- ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- ret = smi->ops->set_mc_index(smi, port, i);
- return ret;
- }
- }
-
- /* We have no MC entry for this VID, try to find an empty one */
- for (i = 0; i < smi->num_vlan_mc; i++) {
- ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- if (vlanmc.vid == 0 && vlanmc.member == 0) {
- /* Update the entry from the 4K table */
- ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
- if (ret)
- return ret;
-
- vlanmc.vid = vid;
- vlanmc.member = vlan4k.member;
- vlanmc.untag = vlan4k.untag;
- vlanmc.fid = vlan4k.fid;
- ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- ret = smi->ops->set_mc_index(smi, port, i);
- return ret;
- }
- }
-
- /* MC table is full, try to find an unused entry and replace it */
- for (i = 0; i < smi->num_vlan_mc; i++) {
- int used;
-
- ret = rtl8366_mc_is_used(smi, i, &used);
- if (ret)
- return ret;
-
- if (!used) {
- /* Update the entry from the 4K table */
- ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
- if (ret)
- return ret;
-
- vlanmc.vid = vid;
- vlanmc.member = vlan4k.member;
- vlanmc.untag = vlan4k.untag;
- vlanmc.fid = vlan4k.fid;
- ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
+ /* Find or allocate a member config for this VID */
+ ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
+ if (ret < 0)
+ return ret;
+ mc = ret;
- ret = smi->ops->set_mc_index(smi, port, i);
- return ret;
- }
+ ret = smi->ops->set_mc_index(smi, port, mc);
+ if (ret) {
+ dev_err(smi->dev, "set PVID: failed to set MC index %d for port %d\n",
+ mc, port);
+ return ret;
}
- dev_err(smi->dev,
- "all VLAN member configurations are in use\n");
+ dev_dbg(smi->dev, "set PVID: the PVID for port %d set to %d using existing MC index %d\n",
+ port, vid, mc);
- return -ENOSPC;
+ return 0;
}
EXPORT_SYMBOL_GPL(rtl8366_set_pvid);
@@ -395,7 +415,8 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port,
if (!smi->ops->is_vlan_valid(smi, vid))
return;
- dev_info(smi->dev, "add VLAN on port %d, %s, %s\n",
+ dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n",
+ vlan->vid_begin,
port,
untagged ? "untagged" : "tagged",
pvid ? " PVID" : "no PVID");
@@ -404,34 +425,26 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port,
dev_err(smi->dev, "port is DSA or CPU port\n");
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
- int pvid_val = 0;
-
- dev_info(smi->dev, "add VLAN %04x\n", vid);
member |= BIT(port);
if (untagged)
untag |= BIT(port);
- /* To ensure that we have a valid MC entry for this VLAN,
- * initialize the port VLAN ID here.
- */
- ret = rtl8366_get_pvid(smi, port, &pvid_val);
- if (ret < 0) {
- dev_err(smi->dev, "could not lookup PVID for port %d\n",
- port);
- return;
- }
- if (pvid_val == 0) {
- ret = rtl8366_set_pvid(smi, port, vid);
- if (ret < 0)
- return;
- }
-
ret = rtl8366_set_vlan(smi, vid, member, untag, 0);
if (ret)
dev_err(smi->dev,
"failed to set up VLAN %04x",
vid);
+
+ ret = rtl8366_set_pvid(smi, port, vid);
+ if (ret)
+ dev_err(smi->dev,
+ "failed to set PVID on port %d to VLAN %04x",
+ port, vid);
+
+ if (!ret)
+ dev_dbg(smi->dev, "VLAN add: added VLAN %d with PVID on port %d\n",
+ vid, port);
}
}
EXPORT_SYMBOL_GPL(rtl8366_vlan_add);
--
2.25.1
From: Shengjiu Wang <[email protected]>
[ Upstream commit 22a16145af824f91014d07f8664114859900b9e6 ]
Instantiate snd_soc_dai_driver for independent symmetric control.
Otherwise the symmetric setting may be overwritten by other
instance.
Fixes: 08fdf65e37d5 ("ASoC: fsl_sai: Add asynchronous mode support")
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl_sai.c | 19 +++++++++++--------
sound/soc/fsl/fsl_sai.h | 1 +
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 7031869a023a1..211e29a73a41a 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -694,7 +694,7 @@ static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
return 0;
}
-static struct snd_soc_dai_driver fsl_sai_dai = {
+static struct snd_soc_dai_driver fsl_sai_dai_template = {
.probe = fsl_sai_dai_probe,
.playback = {
.stream_name = "CPU-Playback",
@@ -966,12 +966,15 @@ static int fsl_sai_probe(struct platform_device *pdev)
return ret;
}
+ memcpy(&sai->cpu_dai_drv, &fsl_sai_dai_template,
+ sizeof(fsl_sai_dai_template));
+
/* Sync Tx with Rx as default by following old DT binding */
sai->synchronous[RX] = true;
sai->synchronous[TX] = false;
- fsl_sai_dai.symmetric_rates = 1;
- fsl_sai_dai.symmetric_channels = 1;
- fsl_sai_dai.symmetric_samplebits = 1;
+ sai->cpu_dai_drv.symmetric_rates = 1;
+ sai->cpu_dai_drv.symmetric_channels = 1;
+ sai->cpu_dai_drv.symmetric_samplebits = 1;
if (of_find_property(np, "fsl,sai-synchronous-rx", NULL) &&
of_find_property(np, "fsl,sai-asynchronous", NULL)) {
@@ -988,9 +991,9 @@ static int fsl_sai_probe(struct platform_device *pdev)
/* Discard all settings for asynchronous mode */
sai->synchronous[RX] = false;
sai->synchronous[TX] = false;
- fsl_sai_dai.symmetric_rates = 0;
- fsl_sai_dai.symmetric_channels = 0;
- fsl_sai_dai.symmetric_samplebits = 0;
+ sai->cpu_dai_drv.symmetric_rates = 0;
+ sai->cpu_dai_drv.symmetric_channels = 0;
+ sai->cpu_dai_drv.symmetric_samplebits = 0;
}
if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) &&
@@ -1019,7 +1022,7 @@ static int fsl_sai_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component,
- &fsl_sai_dai, 1);
+ &sai->cpu_dai_drv, 1);
if (ret)
goto err_pm_disable;
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 6aba7d28f5f34..677ecfc1ec68f 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -180,6 +180,7 @@ struct fsl_sai {
unsigned int bclk_ratio;
const struct fsl_sai_soc_data *soc_data;
+ struct snd_soc_dai_driver cpu_dai_drv;
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct snd_dmaengine_dai_dma_data dma_params_tx;
};
--
2.25.1
From: Colin Ian King <[email protected]>
[ Upstream commit 63f6982075d890d7563e2469643f05a37d193f01 ]
Currently if an unsupported iftype is detected the error return path
does not free the cmd_skb leading to a resource leak. Fix this by
free'ing cmd_skb.
Addresses-Coverity: ("Resource leak")
Fixes: 805b28c05c8e ("qtnfmac: prepare for AP_VLAN interface type support")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/quantenna/qtnfmac/commands.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.c b/drivers/net/wireless/quantenna/qtnfmac/commands.c
index f40d8c3c3d9e5..f3ccbd2b10847 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.c
@@ -869,6 +869,7 @@ int qtnf_cmd_send_del_intf(struct qtnf_vif *vif)
default:
pr_warn("VIF%u.%u: unsupported iftype %d\n", vif->mac->macid,
vif->vifid, vif->wdev.iftype);
+ dev_kfree_skb(cmd_skb);
ret = -EINVAL;
goto out;
}
@@ -1924,6 +1925,7 @@ int qtnf_cmd_send_change_sta(struct qtnf_vif *vif, const u8 *mac,
break;
default:
pr_err("unsupported iftype %d\n", vif->wdev.iftype);
+ dev_kfree_skb(cmd_skb);
ret = -EINVAL;
goto out;
}
--
2.25.1
From: Dan Murphy <[email protected]>
[ Upstream commit 4272caf34aa4699eca8e6e7f4a8e5ea2bde275c9 ]
Add the BIAS_STANDBY and BIAS_PREPARE to the set_bias_level or else the
driver will return -EINVAL which is not correct as they are valid
states.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/tas2770.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 9f759c51ca435..4d67b1c160380 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -57,7 +57,12 @@ static int tas2770_set_bias_level(struct snd_soc_component *component,
TAS2770_PWR_CTRL_MASK,
TAS2770_PWR_CTRL_ACTIVE);
break;
-
+ case SND_SOC_BIAS_STANDBY:
+ case SND_SOC_BIAS_PREPARE:
+ snd_soc_component_update_bits(component,
+ TAS2770_PWR_CTRL,
+ TAS2770_PWR_CTRL_MASK, TAS2770_PWR_CTRL_MUTE);
+ break;
case SND_SOC_BIAS_OFF:
snd_soc_component_update_bits(component,
TAS2770_PWR_CTRL,
--
2.25.1
From: Andrew Jeffery <[email protected]>
[ Upstream commit 1d6db5ae6b090d1a8edfcb36b9bf47c5f4fe27f6 ]
The Aspeed pinconf data structures are split into 'conf' and 'map'
types, where the 'conf' struct defines which register and bitfield to
manipulate, while the 'map' struct defines what value to write to
the register and bitfield.
Both structs have a mask member, and the wrong mask was being used to
tell the regmap which bits to update.
A todo is to look at whether we can remove the mask from the 'map'
struct.
Fixes: 5f52c853847f ("pinctrl: aspeed: Use masks to describe pinconf bitfields")
Signed-off-by: Andrew Jeffery <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Cc: Johnny Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index b625a657171e6..11e27136032b9 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -515,7 +515,7 @@ int aspeed_pin_config_set(struct pinctrl_dev *pctldev, unsigned int offset,
val = pmap->val << __ffs(pconf->mask);
rc = regmap_update_bits(pdata->scu, pconf->reg,
- pmap->mask, val);
+ pconf->mask, val);
if (rc < 0)
return rc;
--
2.25.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 362b9398c962c9ec563653444e15ef9032ef3a90 ]
When booting up on a Raspberry Pi 4 with Control Flow Integrity checking
enabled, the following warning/panic happens:
[ 1.626435] CFI failure (target: dwc2_set_bcm_params+0x0/0x4):
[ 1.632408] WARNING: CPU: 0 PID: 32 at kernel/cfi.c:30 __cfi_check_fail+0x54/0x5c
[ 1.640021] Modules linked in:
[ 1.643137] CPU: 0 PID: 32 Comm: kworker/0:1 Not tainted 5.8.0-rc6-next-20200724-00051-g89ba619726de #1
[ 1.652693] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[ 1.658637] Workqueue: events deferred_probe_work_func
[ 1.663870] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 1.669542] pc : __cfi_check_fail+0x54/0x5c
[ 1.673798] lr : __cfi_check_fail+0x54/0x5c
[ 1.678050] sp : ffff8000102bbaa0
[ 1.681419] x29: ffff8000102bbaa0 x28: ffffab09e21c7000
[ 1.686829] x27: 0000000000000402 x26: ffff0000f6e7c228
[ 1.692238] x25: 00000000fb7cdb0d x24: 0000000000000005
[ 1.697647] x23: ffffab09e2515000 x22: ffffab09e069a000
[ 1.703055] x21: 4c550309df1cf4c1 x20: ffffab09e2433c60
[ 1.708462] x19: ffffab09e160dc50 x18: ffff0000f6e8cc78
[ 1.713870] x17: 0000000000000041 x16: ffffab09e0bce6f8
[ 1.719278] x15: ffffab09e1c819b7 x14: 0000000000000003
[ 1.724686] x13: 00000000ffffefff x12: 0000000000000000
[ 1.730094] x11: 0000000000000000 x10: 00000000ffffffff
[ 1.735501] x9 : c932f7abfc4bc600 x8 : c932f7abfc4bc600
[ 1.740910] x7 : 077207610770075f x6 : ffff0000f6c38f00
[ 1.746317] x5 : 0000000000000000 x4 : 0000000000000000
[ 1.751723] x3 : 0000000000000000 x2 : 0000000000000000
[ 1.757129] x1 : ffff8000102bb7d8 x0 : 0000000000000032
[ 1.762539] Call trace:
[ 1.765030] __cfi_check_fail+0x54/0x5c
[ 1.768938] __cfi_check+0x5fa6c/0x66afc
[ 1.772932] dwc2_init_params+0xd74/0xd78
[ 1.777012] dwc2_driver_probe+0x484/0x6ec
[ 1.781180] platform_drv_probe+0xb4/0x100
[ 1.785350] really_probe+0x228/0x63c
[ 1.789076] driver_probe_device+0x80/0xc0
[ 1.793247] __device_attach_driver+0x114/0x160
[ 1.797857] bus_for_each_drv+0xa8/0x128
[ 1.801851] __device_attach.llvm.14901095709067289134+0xc0/0x170
[ 1.808050] bus_probe_device+0x44/0x100
[ 1.812044] deferred_probe_work_func+0x78/0xb8
[ 1.816656] process_one_work+0x204/0x3c4
[ 1.820736] worker_thread+0x2f0/0x4c4
[ 1.824552] kthread+0x174/0x184
[ 1.827837] ret_from_fork+0x10/0x18
CFI validates that all indirect calls go to a function with the same
exact function pointer prototype. In this case, dwc2_set_bcm_params
is the target, which has a parameter of type 'struct dwc2_hsotg *',
but it is being implicitly cast to have a parameter of type 'void *'
because that is the set_params function pointer prototype. Make the
function pointer protoype match the definitions so that there is no
more violation.
Fixes: 7de1debcd2de ("usb: dwc2: Remove platform static params")
Link: https://github.com/ClangBuiltLinux/linux/issues/1107
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/params.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index ce736d67c7c34..fd73ddd8eb753 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -860,7 +860,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
int dwc2_init_params(struct dwc2_hsotg *hsotg)
{
const struct of_device_id *match;
- void (*set_params)(void *data);
+ void (*set_params)(struct dwc2_hsotg *data);
dwc2_set_default_params(hsotg);
dwc2_get_device_properties(hsotg);
--
2.25.1
From: Andreas Färber <[email protected]>
[ Upstream commit ac4bac99161e8f7a7a9faef70d8ca8f69d5493a9 ]
If rtw_core_init() fails to load the wow firmware, rtw_core_deinit()
will not get called to clean up the regular firmware.
Ensure that an error loading the wow firmware does not produce an oops
for the regular firmware by waiting on its completion to be signalled
before returning. Also release the loaded firmware.
Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")
Cc: Chin-Yen Lee <[email protected]>
Cc: Yan-Hsuan Chuang <[email protected]>
Signed-off-by: Andreas Färber <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 80b880b671eaa..6a881d0be9bf0 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1465,6 +1465,9 @@ int rtw_core_init(struct rtw_dev *rtwdev)
ret = rtw_load_firmware(rtwdev, RTW_WOWLAN_FW);
if (ret) {
rtw_warn(rtwdev, "no wow firmware loaded\n");
+ wait_for_completion(&rtwdev->fw.completion);
+ if (rtwdev->fw.firmware)
+ release_firmware(rtwdev->fw.firmware);
return ret;
}
}
--
2.25.1
From: Thomas Gleixner <[email protected]>
[ Upstream commit a53b59ece86c86d16d12ccdaa1ad0c78250a9d96 ]
enic_dev_wait() has a BUG_ON(in_interrupt()).
Chasing the callers of enic_dev_wait() revealed the gems of enic_reset()
and enic_tx_hang_reset() which are both invoked through work queues in
order to be able to call rtnl_lock(). So far so good.
After locking rtnl both functions acquire enic::enic_api_lock which
serializes against the (ab)use from infiniband. This is where the
trainwreck starts.
enic::enic_api_lock is a spin_lock() which implicitly disables preemption,
but both functions invoke a ton of functions under that lock which can
sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it
can't detect the preempt disabled condition.
This clearly has never been tested with any of the mandatory debug options
for 7+ years, which would have caught that for sure.
Cure it by adding a enic_api_busy member to struct enic, which is modified
and evaluated with enic::enic_api_lock held.
If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true,
it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to
become false.
It would be smarter to wait for a completion of that busy period, but
enic_api_devcmd_proxy_by_index() is called with other spin locks held which
obviously can't sleep.
Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and
with proper debugging enabled the problem would have been caught from the
debug checks in schedule_timeout().
Fixes: 0b038566c0ea ("drivers/net: enic: Add an interface for USNIC to interact with firmware")
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cisco/enic/enic.h | 1 +
drivers/net/ethernet/cisco/enic/enic_api.c | 6 +++++
drivers/net/ethernet/cisco/enic/enic_main.c | 27 ++++++++++++++++-----
3 files changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h
index 18f3aeb88f22a..c67a16a48d624 100644
--- a/drivers/net/ethernet/cisco/enic/enic.h
+++ b/drivers/net/ethernet/cisco/enic/enic.h
@@ -169,6 +169,7 @@ struct enic {
u16 num_vfs;
#endif
spinlock_t enic_api_lock;
+ bool enic_api_busy;
struct enic_port_profile *pp;
/* work queue cache line section */
diff --git a/drivers/net/ethernet/cisco/enic/enic_api.c b/drivers/net/ethernet/cisco/enic/enic_api.c
index b161f24522b87..b028ea2dec2b9 100644
--- a/drivers/net/ethernet/cisco/enic/enic_api.c
+++ b/drivers/net/ethernet/cisco/enic/enic_api.c
@@ -34,6 +34,12 @@ int enic_api_devcmd_proxy_by_index(struct net_device *netdev, int vf,
struct vnic_dev *vdev = enic->vdev;
spin_lock(&enic->enic_api_lock);
+ while (enic->enic_api_busy) {
+ spin_unlock(&enic->enic_api_lock);
+ cpu_relax();
+ spin_lock(&enic->enic_api_lock);
+ }
+
spin_lock_bh(&enic->devcmd_lock);
vnic_dev_cmd_proxy_by_index_start(vdev, vf);
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index cd5fe4f6b54ce..21093f33d2d73 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2140,8 +2140,6 @@ static int enic_dev_wait(struct vnic_dev *vdev,
int done;
int err;
- BUG_ON(in_interrupt());
-
err = start(vdev, arg);
if (err)
return err;
@@ -2329,6 +2327,13 @@ static int enic_set_rss_nic_cfg(struct enic *enic)
rss_hash_bits, rss_base_cpu, rss_enable);
}
+static void enic_set_api_busy(struct enic *enic, bool busy)
+{
+ spin_lock(&enic->enic_api_lock);
+ enic->enic_api_busy = busy;
+ spin_unlock(&enic->enic_api_lock);
+}
+
static void enic_reset(struct work_struct *work)
{
struct enic *enic = container_of(work, struct enic, reset);
@@ -2338,7 +2343,9 @@ static void enic_reset(struct work_struct *work)
rtnl_lock();
- spin_lock(&enic->enic_api_lock);
+ /* Stop any activity from infiniband */
+ enic_set_api_busy(enic, true);
+
enic_stop(enic->netdev);
enic_dev_soft_reset(enic);
enic_reset_addr_lists(enic);
@@ -2346,7 +2353,10 @@ static void enic_reset(struct work_struct *work)
enic_set_rss_nic_cfg(enic);
enic_dev_set_ig_vlan_rewrite_mode(enic);
enic_open(enic->netdev);
- spin_unlock(&enic->enic_api_lock);
+
+ /* Allow infiniband to fiddle with the device again */
+ enic_set_api_busy(enic, false);
+
call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
rtnl_unlock();
@@ -2358,7 +2368,9 @@ static void enic_tx_hang_reset(struct work_struct *work)
rtnl_lock();
- spin_lock(&enic->enic_api_lock);
+ /* Stop any activity from infiniband */
+ enic_set_api_busy(enic, true);
+
enic_dev_hang_notify(enic);
enic_stop(enic->netdev);
enic_dev_hang_reset(enic);
@@ -2367,7 +2379,10 @@ static void enic_tx_hang_reset(struct work_struct *work)
enic_set_rss_nic_cfg(enic);
enic_dev_set_ig_vlan_rewrite_mode(enic);
enic_open(enic->netdev);
- spin_unlock(&enic->enic_api_lock);
+
+ /* Allow infiniband to fiddle with the device again */
+ enic_set_api_busy(enic, false);
+
call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
rtnl_unlock();
--
2.25.1
From: Lorenzo Colitti <[email protected]>
[ Upstream commit 986499b1569af980a819817f17238015b27793f6 ]
Currently, SuperSpeed NCM gadgets report a speed of 851 Mbps
in USB_CDC_NOTIFY_SPEED_CHANGE. But the calculation appears to
assume 16 packets per microframe, and USB 3 and above no longer
use microframes.
Maximum speed is actually much higher. On a direct connection,
theoretical throughput is at most 3.86 Gbps for gen1x1 and
9.36 Gbps for gen2x1, and I have seen gadget->host iperf
throughput of >2 Gbps for gen1x1 and >4 Gbps for gen2x1.
Unfortunately the ConnectionSpeedChange defined in the CDC spec
only uses 32-bit values, so we can't report accurate numbers for
10Gbps and above. So, report 3.75Gbps for SuperSpeed (which is
roughly maximum theoretical performance) and 4.25Gbps for
SuperSpeed Plus (which is close to the maximum that we can report
in a 32-bit unsigned integer).
This results in:
[50879.191272] cdc_ncm 2-2:1.0 enx228b127e050c: renamed from usb0
[50879.234778] cdc_ncm 2-2:1.0 enx228b127e050c: 3750 mbit/s downlink 3750 mbit/s uplink
on SuperSpeed and:
[50798.434527] cdc_ncm 8-2:1.0 enx228b127e050c: renamed from usb0
[50798.524278] cdc_ncm 8-2:1.0 enx228b127e050c: 4250 mbit/s downlink 4250 mbit/s uplink
on SuperSpeed Plus.
Fixes: 1650113888fe ("usb: gadget: f_ncm: add SuperSpeed descriptors for CDC NCM")
Reviewed-by: Maciej Żenczykowski <[email protected]>
Signed-off-by: Lorenzo Colitti <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_ncm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 1f638759a9533..7672fa25085b0 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -85,8 +85,10 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f)
/* peak (theoretical) bulk transfer rate in bits-per-second */
static inline unsigned ncm_bitrate(struct usb_gadget *g)
{
- if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
- return 13 * 1024 * 8 * 1000 * 8;
+ if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
+ return 4250000000U;
+ else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+ return 3750000000U;
else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
return 13 * 512 * 8 * 1000 * 8;
else
--
2.25.1
From: Yoshihiro Shimoda <[email protected]>
[ Upstream commit d98ef43bfb65b5201e1afe36aaf8c4f9d71b4307 ]
The commit aba3a8d01d62 ("usb: gadget: u_serial: add suspend resume
callbacks") set/cleared the suspended flag in USB bus suspend/resume
only. But, when a USB cable is disconnected in the suspend, since some
controllers will not detect USB bus resume, the suspended flag is not
cleared. After that, user cannot send any data. To fix the issue,
clears the suspended flag in the gserial_disconnect().
Fixes: aba3a8d01d62 ("usb: gadget: u_serial: add suspend resume callbacks")
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Tested-by: Linh Phung <[email protected]>
Tested-by: Tam Nguyen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/u_serial.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 3cfc6e2eba71a..e0e3cb2f6f3bc 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -1391,6 +1391,7 @@ void gserial_disconnect(struct gserial *gser)
if (port->port.tty)
tty_hangup(port->port.tty);
}
+ port->suspended = false;
spin_unlock_irqrestore(&port->port_lock, flags);
/* disable endpoints, aborting down any active I/O */
--
2.25.1
From: Mordechay Goodstein <[email protected]>
[ Upstream commit bfdb157127dab2a85d4096a68a00ad568c9eb590 ]
Currently if group-id and command-id values are zero we
trigger and collect every RX frame,
this is not the right behavior and zero value
should be handled like any other filter.
Signed-off-by: Mordechay Goodstein <[email protected]>
Fixes: 3ed34fbf9d3b ("iwlwifi: dbg_ini: support FW response/notification region type")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200930161256.6a0aae2c0507.I7bd72968279d586af420472707d53106b35efc08@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
index 27116c7d3f4f8..641da49b1b86e 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
@@ -947,9 +947,8 @@ static bool iwl_dbg_tlv_check_fw_pkt(struct iwl_fw_runtime *fwrt,
struct iwl_rx_packet *pkt = tp_data->fw_pkt;
struct iwl_cmd_header *wanted_hdr = (void *)&trig_data;
- if (pkt && ((wanted_hdr->cmd == 0 && wanted_hdr->group_id == 0) ||
- (pkt->hdr.cmd == wanted_hdr->cmd &&
- pkt->hdr.group_id == wanted_hdr->group_id))) {
+ if (pkt && (pkt->hdr.cmd == wanted_hdr->cmd &&
+ pkt->hdr.group_id == wanted_hdr->group_id)) {
struct iwl_rx_packet *fw_pkt =
kmemdup(pkt,
sizeof(*pkt) + iwl_rx_packet_payload_len(pkt),
--
2.25.1
From: Manivannan Sadhasivam <[email protected]>
[ Upstream commit 5fc4997fd9d065c98fb312ef56ffadffccc6d61d ]
The Kbuild rule to build MHI should use the append operator. This fixes
the below warning reported by Kbuild test bot.
WARNING: modpost: missing MODULE_LICENSE() in
drivers/bus/mhi/core/main.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/pm.o
WARNING: modpost: missing MODULE_LICENSE() in
drivers/bus/mhi/core/boot.o
Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/mhi/core/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bus/mhi/core/Makefile b/drivers/bus/mhi/core/Makefile
index 66e2700c9032a..bc1469778cf87 100644
--- a/drivers/bus/mhi/core/Makefile
+++ b/drivers/bus/mhi/core/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_MHI_BUS) := mhi.o
+obj-$(CONFIG_MHI_BUS) += mhi.o
mhi-y := init.o main.o pm.o boot.o
--
2.25.1
From: Minas Harutyunyan <[email protected]>
[ Upstream commit b2c586eb07efab982419f32b7c3bd96829bc8bcd ]
In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet
corresponds to single descriptor.
Descriptor limit set to mps and desc chain limit set to mps *
MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate
transfer size should be considered correction value for each descriptor.
In start request function, if "continue" is true then dma buffer address
should be incremmented by offset for all type of transfers, not only for
Control DATA_OUT transfers.
Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA")
Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming")
Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete")
Signed-off-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/gadget.c | 40 ++++++++++++++++++++++++++++++++-------
1 file changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 7faf5f8c056d4..642926f9670e6 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -712,8 +712,11 @@ static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
*/
static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
{
+ const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
int is_isoc = hs_ep->isochronous;
unsigned int maxsize;
+ u32 mps = hs_ep->ep.maxpacket;
+ int dir_in = hs_ep->dir_in;
if (is_isoc)
maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
@@ -722,6 +725,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
else
maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC;
+ /* Interrupt OUT EP with mps not multiple of 4 */
+ if (hs_ep->index)
+ if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+ maxsize = mps * MAX_DMA_DESC_NUM_GENERIC;
+
return maxsize;
}
@@ -737,11 +745,14 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
* Isochronous - descriptor rx/tx bytes bitfield limit,
* Control In/Bulk/Interrupt - multiple of mps. This will allow to not
* have concatenations from various descriptors within one packet.
+ * Interrupt OUT - if mps not multiple of 4 then a single packet corresponds
+ * to a single descriptor.
*
* Selects corresponding mask for RX/TX bytes as well.
*/
static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
{
+ const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
u32 mps = hs_ep->ep.maxpacket;
int dir_in = hs_ep->dir_in;
u32 desc_size = 0;
@@ -765,6 +776,13 @@ static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
desc_size -= desc_size % mps;
}
+ /* Interrupt OUT EP with mps not multiple of 4 */
+ if (hs_ep->index)
+ if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) {
+ desc_size = mps;
+ *mask = DEV_DMA_NBYTES_MASK;
+ }
+
return desc_size;
}
@@ -1123,13 +1141,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
length += (mps - (length % mps));
}
- /*
- * If more data to send, adjust DMA for EP0 out data stage.
- * ureq->dma stays unchanged, hence increment it by already
- * passed passed data count before starting new transaction.
- */
- if (!index && hsotg->ep0_state == DWC2_EP0_DATA_OUT &&
- continuing)
+ if (continuing)
offset = ureq->actual;
/* Fill DDMA chain entries */
@@ -2320,22 +2332,36 @@ static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg,
*/
static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep)
{
+ const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
struct dwc2_hsotg *hsotg = hs_ep->parent;
unsigned int bytes_rem = 0;
+ unsigned int bytes_rem_correction = 0;
struct dwc2_dma_desc *desc = hs_ep->desc_list;
int i;
u32 status;
+ u32 mps = hs_ep->ep.maxpacket;
+ int dir_in = hs_ep->dir_in;
if (!desc)
return -EINVAL;
+ /* Interrupt OUT EP with mps not multiple of 4 */
+ if (hs_ep->index)
+ if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+ bytes_rem_correction = 4 - (mps % 4);
+
for (i = 0; i < hs_ep->desc_count; ++i) {
status = desc->status;
bytes_rem += status & DEV_DMA_NBYTES_MASK;
+ bytes_rem -= bytes_rem_correction;
if (status & DEV_DMA_STS_MASK)
dev_err(hsotg->dev, "descriptor %d closed with %x\n",
i, status & DEV_DMA_STS_MASK);
+
+ if (status & DEV_DMA_L)
+ break;
+
desc++;
}
--
2.25.1
From: Adam Brickman <[email protected]>
[ Upstream commit 20441614d89867142060d3bcd79cc111d8ba7a8e ]
A call to wm_adsp_write_ctl() could cause a kernel crash if it
does not retrieve a valid kcontrol from snd_soc_card_get_kcontrol().
This can happen due to a missing control name prefix. Then,
snd_ctl_notify() crashes when it tries to use the id field.
Modified wm_adsp_write_ctl() to incorporate the name_prefix (if applicable)
such that it is able to retrieve a valid id field from the kcontrol
once the platform has booted.
Fixes: eb65ccdb0836 ("ASoC: wm_adsp: Expose mixer control API")
Signed-off-by: Adam Brickman <[email protected]>
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wm_adsp.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 519ca2e696372..18f62fde92537 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -2043,6 +2043,7 @@ int wm_adsp_write_ctl(struct wm_adsp *dsp, const char *name, int type,
{
struct wm_coeff_ctl *ctl;
struct snd_kcontrol *kcontrol;
+ char ctl_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
int ret;
ctl = wm_adsp_get_ctl(dsp, name, type, alg);
@@ -2053,8 +2054,25 @@ int wm_adsp_write_ctl(struct wm_adsp *dsp, const char *name, int type,
return -EINVAL;
ret = wm_coeff_write_ctrl(ctl, buf, len);
+ if (ret)
+ return ret;
+
+ if (ctl->flags & WMFW_CTL_FLAG_SYS)
+ return 0;
+
+ if (dsp->component->name_prefix)
+ snprintf(ctl_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s %s",
+ dsp->component->name_prefix, ctl->name);
+ else
+ snprintf(ctl_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s",
+ ctl->name);
+
+ kcontrol = snd_soc_card_get_kcontrol(dsp->component->card, ctl_name);
+ if (!kcontrol) {
+ adsp_err(dsp, "Can't find kcontrol %s\n", ctl_name);
+ return -EINVAL;
+ }
- kcontrol = snd_soc_card_get_kcontrol(dsp->component->card, ctl->name);
snd_ctl_notify(dsp->component->card->snd_card,
SNDRV_CTL_EVENT_MASK_VALUE, &kcontrol->id);
--
2.25.1
From: Tianjia Zhang <[email protected]>
[ Upstream commit 8fe7990ceda8597e407d06bffc4bdbe835a93ece ]
On an error exit path, a negative error code should be returned
instead of a positive return value.
Fixes: 90b2d4f15ff7 ("ipmi_si: Remove hacks for adding a dummy platform devices")
Cc: Corey Minyard <[email protected]>
Signed-off-by: Tianjia Zhang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/ipmi/ipmi_si_intf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 77b8d551ae7fe..dd559661c15b3 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1963,7 +1963,7 @@ static int try_smi_init(struct smi_info *new_smi)
/* Do this early so it's available for logs. */
if (!new_smi->io.dev) {
pr_err("IPMI interface added with no device\n");
- rv = EIO;
+ rv = -EIO;
goto out_err;
}
--
2.25.1
From: Tom Zanussi <[email protected]>
[ Upstream commit 8fbeb52a598c7ab5aa603d6bb083b8a8d16d607a ]
synth_field_size() returns either a positive size or an error (zero or
a negative value). However, the existing code assumes the only error
value is 0. It doesn't handle negative error codes, as it assigns
directly to field->size (a size_t; unsigned), thereby interpreting the
error code as a valid size instead.
Do the test before assignment to field->size.
[ [email protected]: changelog addition, first paragraph above ]
Link: https://lkml.kernel.org/r/9b6946d9776b2eeb43227678158196de1c3c6e1d.1601848695.git.zanussi@kernel.org
Fixes: 4b147936fa50 (tracing: Add support for 'synthetic' events)
Reviewed-by: Masami Hiramatsu <[email protected]>
Tested-by: Axel Rasmussen <[email protected]>
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace_events_synth.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/kernel/trace/trace_events_synth.c b/kernel/trace/trace_events_synth.c
index c6cca0d1d5840..46a96686e93c6 100644
--- a/kernel/trace/trace_events_synth.c
+++ b/kernel/trace/trace_events_synth.c
@@ -465,6 +465,7 @@ static struct synth_field *parse_synth_field(int argc, const char **argv,
struct synth_field *field;
const char *prefix = NULL, *field_type = argv[0], *field_name, *array;
int len, ret = 0;
+ ssize_t size;
if (field_type[0] == ';')
field_type++;
@@ -520,11 +521,12 @@ static struct synth_field *parse_synth_field(int argc, const char **argv,
field->type[len - 1] = '\0';
}
- field->size = synth_field_size(field->type);
- if (!field->size) {
+ size = synth_field_size(field->type);
+ if (size <= 0) {
ret = -EINVAL;
goto free;
}
+ field->size = size;
if (synth_field_is_string(field->type))
field->is_string = true;
--
2.25.1
From: Johannes Berg <[email protected]>
[ Upstream commit ab10c22bc3b2024f0c9eafa463899a071eac8d97 ]
When dumping wiphy information, we try to split the data into
many submessages, but for old userspace we still support the
old mode where this doesn't happen.
However, in this case we were not resetting our state correctly
and dumping multiple messages for each wiphy, which would have
broken such older userspace.
This was broken pretty much immediately afterwards because it
only worked in the original commit where non-split dumps didn't
have any more data than split dumps...
Fixes: fe1abafd942f ("nl80211: re-add channel width and extended capa advertising")
Signed-off-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/20200928130717.3e6d9c6bada2.Ie0f151a8d0d00a8e1e18f6a8c9244dd02496af67@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7cbb94b4d4917..47ab86ee192ac 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2355,7 +2355,10 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
* case we'll continue with more data in the next round,
* but break unconditionally so unsplit data stops here.
*/
- state->split_start++;
+ if (state->split)
+ state->split_start++;
+ else
+ state->split_start = 0;
break;
case 9:
if (rdev->wiphy.extended_capabilities &&
--
2.25.1
From: Mike Leach <[email protected]>
[ Upstream commit cab280bf3533c72f95ebdb65ce534b5cdc4729dc ]
During module unload, a coresight driver module will call back into
the CTI driver to remove any links between the two devices.
The current code has 2 issues:-
1) in the CTI driver the matching code is matching to the wrong device
so misses all the links.
2) The callback is called too late in the unload process resulting in a
crash.
This fixes both the issues.
Fixes: 177af8285b59 ("coresight: cti: Enable CTI associated with devices")
Reported-by: Tingwei Zhang <[email protected]>
Acked-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Mike Leach <[email protected]>
Signed-off-by: Tingwei Zhang <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-cti.c | 2 +-
drivers/hwtracing/coresight/coresight.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c
index 92aa535f9e134..167fbc2e7033f 100644
--- a/drivers/hwtracing/coresight/coresight-cti.c
+++ b/drivers/hwtracing/coresight/coresight-cti.c
@@ -592,7 +592,7 @@ void cti_remove_assoc_from_csdev(struct coresight_device *csdev)
ctidrv = csdev_to_cti_drvdata(csdev->ect_dev);
ctidev = &ctidrv->ctidev;
list_for_each_entry(tc, &ctidev->trig_cons, node) {
- if (tc->con_dev == csdev->ect_dev) {
+ if (tc->con_dev == csdev) {
cti_remove_sysfs_link(ctidrv, tc);
tc->con_dev = NULL;
break;
diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c
index f3efbb3b2b4d1..cf03af09c6ced 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -1023,7 +1023,6 @@ static void coresight_device_release(struct device *dev)
{
struct coresight_device *csdev = to_coresight_device(dev);
- cti_remove_assoc_from_csdev(csdev);
fwnode_handle_put(csdev->dev.fwnode);
kfree(csdev->refcnt);
kfree(csdev);
@@ -1357,6 +1356,7 @@ void coresight_unregister(struct coresight_device *csdev)
{
etm_perf_del_symlink_sink(csdev);
/* Remove references of that device in the topology */
+ cti_remove_assoc_from_csdev(csdev);
coresight_remove_conns(csdev);
coresight_release_platform_data(csdev, csdev->pdata);
device_unregister(&csdev->dev);
--
2.25.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 38b2db564d9ab7797192ef15d7aade30633ceeae ]
The be_fill_queue() function can only fail when "eq_vaddress" is NULL and
since it's non-NULL here that means the function call can't fail. But
imagine if it could, then in that situation we would want to store the
"paddr" so that dma memory can be released.
Link: https://lore.kernel.org/r/20200928091300.GD377727@mwanda
Fixes: bfead3b2cb46 ("[SCSI] be2iscsi: Adding msix and mcc_rings V3")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/be2iscsi/be_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 9b81cfbbc5c53..239e04c03cf90 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -3020,6 +3020,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
goto create_eq_error;
}
+ mem->dma = paddr;
mem->va = eq_vaddress;
ret = be_fill_queue(eq, phba->params.num_eq_entries,
sizeof(struct be_eq_entry), eq_vaddress);
@@ -3029,7 +3030,6 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
goto create_eq_error;
}
- mem->dma = paddr;
ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
BEISCSI_EQ_DELAY_DEF);
if (ret) {
@@ -3086,6 +3086,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
goto create_cq_error;
}
+ mem->dma = paddr;
ret = be_fill_queue(cq, phba->params.num_cq_entries,
sizeof(struct sol_cqe), cq_vaddress);
if (ret) {
@@ -3095,7 +3096,6 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
goto create_cq_error;
}
- mem->dma = paddr;
ret = beiscsi_cmd_cq_create(&phba->ctrl, cq, eq, false,
false, 0);
if (ret) {
--
2.25.1
From: Nicholas Mc Guire <[email protected]>
[ Upstream commit 67c3e59443f5fc77be39e2ce0db75fbfa78c7965 ]
The call to of_find_compatible_node() returns a node pointer with
refcount incremented thus it must be explicitly decremented here
before returning.
Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Signed-off-by: Nicholas Mc Guire <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/rng.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/pseries/rng.c b/arch/powerpc/platforms/pseries/rng.c
index bbb97169bf63e..6268545947b83 100644
--- a/arch/powerpc/platforms/pseries/rng.c
+++ b/arch/powerpc/platforms/pseries/rng.c
@@ -36,6 +36,7 @@ static __init int rng_init(void)
ppc_md.get_random_seed = pseries_get_random_long;
+ of_node_put(dn);
return 0;
}
machine_subsys_initcall(pseries, rng_init);
--
2.25.1
From: Vadim Pasternak <[email protected]>
[ Upstream commit c071afcea6ecf24a3c119f25ce9f71ffd55b5dc2 ]
Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrume-2. Till now all the systems from this class
used few types of power units, all equipped with EEPROM device with
address space two bytes. Thus, all these devices have been handled by
EEPROM driver "24c32".
There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
could be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c32" will not work.
Fixes: 1bd42d94ccab ("platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems")
Signed-off-by: Vadim Pasternak <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/mlx-platform.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index c27548fd386ac..0d2ed6d1f9c79 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -319,15 +319,6 @@ static struct i2c_board_info mlxplat_mlxcpld_psu[] = {
},
};
-static struct i2c_board_info mlxplat_mlxcpld_ng_psu[] = {
- {
- I2C_BOARD_INFO("24c32", 0x51),
- },
- {
- I2C_BOARD_INFO("24c32", 0x50),
- },
-};
-
static struct i2c_board_info mlxplat_mlxcpld_pwr[] = {
{
I2C_BOARD_INFO("dps460", 0x59),
@@ -752,15 +743,13 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_psu_items_data[] = {
.label = "psu1",
.reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
.mask = BIT(0),
- .hpdev.brdinfo = &mlxplat_mlxcpld_ng_psu[0],
- .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR,
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
},
{
.label = "psu2",
.reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
.mask = BIT(1),
- .hpdev.brdinfo = &mlxplat_mlxcpld_ng_psu[1],
- .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR,
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
},
};
--
2.25.1
From: Julian Anastasov <[email protected]>
[ Upstream commit 7980d2eabde82be86c5be18aa3d07e88ec13c6a1 ]
fq qdisc requires tstamp to be cleared in forwarding path
Reported-by: Evgeny B <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209427
Suggested-by: Eric Dumazet <[email protected]>
Fixes: 8203e2d844d3 ("net: clear skb->tstamp in forwarding paths")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Signed-off-by: Julian Anastasov <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipvs/ip_vs_xmit.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index b00866d777fe0..d2e5a8f644b80 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -609,6 +609,8 @@ static inline int ip_vs_tunnel_xmit_prepare(struct sk_buff *skb,
if (ret == NF_ACCEPT) {
nf_reset_ct(skb);
skb_forward_csum(skb);
+ if (skb->dev)
+ skb->tstamp = 0;
}
return ret;
}
@@ -649,6 +651,8 @@ static inline int ip_vs_nat_send_or_cont(int pf, struct sk_buff *skb,
if (!local) {
skb_forward_csum(skb);
+ if (skb->dev)
+ skb->tstamp = 0;
NF_HOOK(pf, NF_INET_LOCAL_OUT, cp->ipvs->net, NULL, skb,
NULL, skb_dst(skb)->dev, dst_output);
} else
@@ -669,6 +673,8 @@ static inline int ip_vs_send_or_cont(int pf, struct sk_buff *skb,
if (!local) {
ip_vs_drop_early_demux_sk(skb);
skb_forward_csum(skb);
+ if (skb->dev)
+ skb->tstamp = 0;
NF_HOOK(pf, NF_INET_LOCAL_OUT, cp->ipvs->net, NULL, skb,
NULL, skb_dst(skb)->dev, dst_output);
} else
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 38e03d092699891c3237b5aee9e8029d4ede0956 ]
All entry points to the rdma_cm from a ULP must be single threaded,
even this error unwinds. Add the missing locking.
Fixes: 7c11910783a1 ("RDMA/ucma: Put a lock around every call to the rdma_cm layer")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/ucma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index cf283b70bf877..2643d5dbe1da8 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -1512,7 +1512,9 @@ static ssize_t ucma_process_join(struct ucma_file *file,
return 0;
err3:
+ mutex_lock(&ctx->mutex);
rdma_leave_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr);
+ mutex_unlock(&ctx->mutex);
ucma_cleanup_mc_events(mc);
err2:
xa_erase(&multicast_table, mc->id);
--
2.25.1
From: Mohammed Gamal <[email protected]>
[ Upstream commit 1f3aed01473c41c9f896fbf4c30d330655e8aa7c ]
When selecting function_graph tracer with the command:
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
The kernel crashes with the following stack trace:
[69703.122389] BUG: stack guard page was hit at 000000001056545c (stack is 00000000fa3f8fed..0000000005d39503)
[69703.122403] kernel stack overflow (double-fault): 0000 [#1] SMP PTI
[69703.122413] CPU: 0 PID: 16982 Comm: bash Kdump: loaded Not tainted 4.18.0-236.el8.x86_64 #1
[69703.122420] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
[69703.122433] RIP: 0010repare_ftrace_return+0xa/0x110
[69703.122458] Code: 05 00 0f 0b 48 c7 c7 10 ca 69 ae 0f b6 f0 e8 4b 52 0c 00 31 c0 eb ca 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 41 54 <53> 48 83 ec 18 65 48 8b 04 25 28 00 00 00 48 89 45 d8 31 c0 48 85
[69703.122467] RSP: 0018:ffffbd6d01118000 EFLAGS: 00010086
[69703.122476] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000003
[69703.122484] RDX: 0000000000000000 RSI: ffffbd6d011180d8 RDI: ffffffffadce7550
[69703.122491] RBP: ffffbd6d01118018 R08: 0000000000000000 R09: ffff9d4b09266000
[69703.122498] R10: ffff9d4b0fc04540 R11: ffff9d4b0fc20a00 R12: ffff9d4b6e42aa90
[69703.122506] R13: ffff9d4b0fc20ab8 R14: 00000000000003e8 R15: ffffbd6d0111837c
[69703.122514] FS: 00007fd5f2588740(0000) GS:ffff9d4b6e400000(0000) knlGS:0000000000000000
[69703.122521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[69703.122528] CR2: ffffbd6d01117ff8 CR3: 00000000565d8001 CR4: 00000000003606f0
[69703.122538] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[69703.122545] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[69703.122552] Call Trace:
[69703.122568] ftrace_graph_caller+0x6b/0xa0
[69703.122589] ? read_hv_sched_clock_tsc+0x5/0x20
[69703.122599] read_hv_sched_clock_tsc+0x5/0x20
[69703.122611] sched_clock+0x5/0x10
[69703.122621] sched_clock_local+0x12/0x80
[69703.122631] sched_clock_cpu+0x8c/0xb0
[69703.122644] trace_clock_global+0x21/0x90
[69703.122655] ring_buffer_lock_reserve+0x100/0x3c0
[69703.122671] trace_buffer_lock_reserve+0x16/0x50
[69703.122683] __trace_graph_entry+0x28/0x90
[69703.122695] trace_graph_entry+0xfd/0x1a0
[69703.122705] ? read_hv_clock_tsc_cs+0x10/0x10
[69703.122714] ? sched_clock+0x5/0x10
[69703.122723] prepare_ftrace_return+0x99/0x110
[69703.122734] ? read_hv_clock_tsc_cs+0x10/0x10
[69703.122743] ? sched_clock+0x5/0x10
[69703.122752] ftrace_graph_caller+0x6b/0xa0
[69703.122768] ? read_hv_clock_tsc_cs+0x10/0x10
[69703.122777] ? sched_clock+0x5/0x10
[69703.122786] ? read_hv_sched_clock_tsc+0x5/0x20
[69703.122796] ? ring_buffer_unlock_commit+0x1d/0xa0
[69703.122805] read_hv_sched_clock_tsc+0x5/0x20
[69703.122814] ftrace_graph_caller+0xa0/0xa0
[ ... recursion snipped ... ]
Setting the notrace attribute for read_hv_sched_clock_msr() and
read_hv_sched_clock_tsc() fixes it.
Fixes: bd00cd52d5be ("clocksource/drivers/hyperv: Add Hyper-V specific sched clock function")
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Mohammed Gamal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/hyperv_timer.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
index 09aa44cb8a91d..ba04cb381cd3f 100644
--- a/drivers/clocksource/hyperv_timer.c
+++ b/drivers/clocksource/hyperv_timer.c
@@ -341,7 +341,7 @@ static u64 notrace read_hv_clock_tsc_cs(struct clocksource *arg)
return read_hv_clock_tsc();
}
-static u64 read_hv_sched_clock_tsc(void)
+static u64 notrace read_hv_sched_clock_tsc(void)
{
return (read_hv_clock_tsc() - hv_sched_clock_offset) *
(NSEC_PER_SEC / HV_CLOCK_HZ);
@@ -404,7 +404,7 @@ static u64 notrace read_hv_clock_msr_cs(struct clocksource *arg)
return read_hv_clock_msr();
}
-static u64 read_hv_sched_clock_msr(void)
+static u64 notrace read_hv_sched_clock_msr(void)
{
return (read_hv_clock_msr() - hv_sched_clock_offset) *
(NSEC_PER_SEC / HV_CLOCK_HZ);
--
2.25.1
From: Tom Zanussi <[email protected]>
[ Upstream commit 96378b2088faea68f1fb05ea6b9a566fc569a44c ]
This test uses waking+wakeup_latency as an event name, which doesn't
make sense since it includes an operator. Illegal names are now
detected by the synthetic event command parsing, which causes this
test to fail. Change the name to 'waking_plus_wakeup_latency' to
prevent this.
Link: https://lkml.kernel.org/r/a1ee2f76ff28ef7166fb788ca8be968887808920.1602598160.git.zanussi@kernel.org
Fixes: f06eec4d0f2c (selftests: ftrace: Add inter-event hist triggers testcases)
Acked-by: Masami Hiramatsu <[email protected]>
Tested-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../inter-event/trigger-inter-event-combined-hist.tc | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
index 7449a4b8f1f9a..9098f1e7433fd 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
@@ -25,12 +25,12 @@ echo 'wakeup_latency u64 lat pid_t pid' >> synthetic_events
echo 'hist:keys=pid:ts1=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_wakeup/trigger
echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts1:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid) if next_comm=="ping"' > events/sched/sched_switch/trigger
-echo 'waking+wakeup_latency u64 lat; pid_t pid' >> synthetic_events
-echo 'hist:keys=pid,lat:sort=pid,lat:ww_lat=$waking_lat+$wakeup_lat:onmatch(synthetic.wakeup_latency).waking+wakeup_latency($ww_lat,pid)' >> events/synthetic/wakeup_latency/trigger
-echo 'hist:keys=pid,lat:sort=pid,lat' >> events/synthetic/waking+wakeup_latency/trigger
+echo 'waking_plus_wakeup_latency u64 lat; pid_t pid' >> synthetic_events
+echo 'hist:keys=pid,lat:sort=pid,lat:ww_lat=$waking_lat+$wakeup_lat:onmatch(synthetic.wakeup_latency).waking_plus_wakeup_latency($ww_lat,pid)' >> events/synthetic/wakeup_latency/trigger
+echo 'hist:keys=pid,lat:sort=pid,lat' >> events/synthetic/waking_plus_wakeup_latency/trigger
ping $LOCALHOST -c 3
-if ! grep -q "pid:" events/synthetic/waking+wakeup_latency/hist; then
+if ! grep -q "pid:" events/synthetic/waking_plus_wakeup_latency/hist; then
fail "Failed to create combined histogram"
fi
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 61690d01db32eb1f94adc9ac2b8bb741d34e4671 ]
The original function returns unsigned long and 0 on failure.
Fixes: 4a35339958f1 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Gal Pressman <[email protected]>
Acked-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/rdma/ib_umem.h | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/include/rdma/ib_umem.h b/include/rdma/ib_umem.h
index e3518fd6b95b1..9353910915d41 100644
--- a/include/rdma/ib_umem.h
+++ b/include/rdma/ib_umem.h
@@ -95,10 +95,11 @@ static inline int ib_umem_copy_from(void *dst, struct ib_umem *umem, size_t offs
size_t length) {
return -EINVAL;
}
-static inline int ib_umem_find_best_pgsz(struct ib_umem *umem,
- unsigned long pgsz_bitmap,
- unsigned long virt) {
- return -EINVAL;
+static inline unsigned long ib_umem_find_best_pgsz(struct ib_umem *umem,
+ unsigned long pgsz_bitmap,
+ unsigned long virt)
+{
+ return 0;
}
#endif /* CONFIG_INFINIBAND_USER_MEM */
--
2.25.1
From: Parshuram Thombare <[email protected]>
[ Upstream commit 9da36a7ec42135428e1d41621e3703429bda3b2e ]
Boardinfo was lost if I3C object for devices with boardinfo
available are not created or not added to the I3C device list
because of some failure e.g. SETDASA failed, retrieve info failed etc
This patch adds i3c_master_attach_boardinfo which scan boardinfo list
in the master object and 'attach' it to the I3C device object.
Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Parshuram Thombare <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://lore.kernel.org/linux-i3c/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i3c/master.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 97f2e29265da7..cc7564446ccd2 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1782,6 +1782,21 @@ static void i3c_master_bus_cleanup(struct i3c_master_controller *master)
i3c_master_detach_free_devs(master);
}
+static void i3c_master_attach_boardinfo(struct i3c_dev_desc *i3cdev)
+{
+ struct i3c_master_controller *master = i3cdev->common.master;
+ struct i3c_dev_boardinfo *i3cboardinfo;
+
+ list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
+ if (i3cdev->info.pid != i3cboardinfo->pid)
+ continue;
+
+ i3cdev->boardinfo = i3cboardinfo;
+ i3cdev->info.static_addr = i3cboardinfo->static_addr;
+ return;
+ }
+}
+
static struct i3c_dev_desc *
i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
{
@@ -1837,10 +1852,10 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
if (ret)
goto err_detach_dev;
+ i3c_master_attach_boardinfo(newdev);
+
olddev = i3c_master_search_i3c_dev_duplicate(newdev);
if (olddev) {
- newdev->boardinfo = olddev->boardinfo;
- newdev->info.static_addr = olddev->info.static_addr;
newdev->dev = olddev->dev;
if (newdev->dev)
newdev->dev->desc = newdev;
--
2.25.1
From: Scott Cheloha <[email protected]>
[ Upstream commit e5e179aa3a39c818db8fbc2dce8d2cd24adaf657 ]
At memory hot-remove time we can retrieve an LMB's nid from its
corresponding memory_block. There is no need to store the nid
in multiple locations.
Note that lmb_to_memblock() uses find_memory_block() to get the
corresponding memory_block. As find_memory_block() runs in sub-linear
time this approach is negligibly slower than what we do at present.
In exchange for this lookup at hot-remove time we no longer need to
call memory_add_physaddr_to_nid() during drmem_init() for each LMB.
On powerpc, memory_add_physaddr_to_nid() is a linear search, so this
spares us an O(n^2) initialization during boot.
On systems with many LMBs that initialization overhead is palpable and
disruptive. For example, on a box with 249854 LMBs we're seeing
drmem_init() take upwards of 30 seconds to complete:
[ 53.721639] drmem: initializing drmem v2
[ 80.604346] watchdog: BUG: soft lockup - CPU#65 stuck for 23s! [swapper/0:1]
[ 80.604377] Modules linked in:
[ 80.604389] CPU: 65 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc2+ #4
[ 80.604397] NIP: c0000000000a4980 LR: c0000000000a4940 CTR: 0000000000000000
[ 80.604407] REGS: c0002dbff8493830 TRAP: 0901 Not tainted (5.6.0-rc2+)
[ 80.604412] MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000248 XER: 0000000d
[ 80.604431] CFAR: c0000000000a4a38 IRQMASK: 0
[ 80.604431] GPR00: c0000000000a4940 c0002dbff8493ac0 c000000001904400 c0003cfffffede30
[ 80.604431] GPR04: 0000000000000000 c000000000f4095a 000000000000002f 0000000010000000
[ 80.604431] GPR08: c0000bf7ecdb7fb8 c0000bf7ecc2d3c8 0000000000000008 c00c0002fdfb2001
[ 80.604431] GPR12: 0000000000000000 c00000001e8ec200
[ 80.604477] NIP [c0000000000a4980] hot_add_scn_to_nid+0xa0/0x3e0
[ 80.604486] LR [c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0
[ 80.604492] Call Trace:
[ 80.604498] [c0002dbff8493ac0] [c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0 (unreliable)
[ 80.604509] [c0002dbff8493b20] [c000000000087c10] memory_add_physaddr_to_nid+0x20/0x60
[ 80.604521] [c0002dbff8493b40] [c0000000010d4880] drmem_init+0x25c/0x2f0
[ 80.604530] [c0002dbff8493c10] [c000000000010154] do_one_initcall+0x64/0x2c0
[ 80.604540] [c0002dbff8493ce0] [c0000000010c4aa0] kernel_init_freeable+0x2d8/0x3a0
[ 80.604550] [c0002dbff8493db0] [c000000000010824] kernel_init+0x2c/0x148
[ 80.604560] [c0002dbff8493e20] [c00000000000b648] ret_from_kernel_thread+0x5c/0x74
[ 80.604567] Instruction dump:
[ 80.604574] 392918e8 e9490000 e90a000a e92a0000 80ea000c 1d080018 3908ffe8 7d094214
[ 80.604586] 7fa94040 419d00dc e9490010 714a0088 <2faa0008> 409e00ac e9490000 7fbe5040
[ 89.047390] drmem: 249854 LMB(s)
With a patched kernel on the same machine we're no longer seeing the
soft lockup. drmem_init() now completes in negligible time, even when
the LMB count is large.
Fixes: b2d3b5ee66f2 ("powerpc/pseries: Track LMB nid instead of using device tree")
Signed-off-by: Scott Cheloha <[email protected]>
Reviewed-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/drmem.h | 21 ----------------
arch/powerpc/mm/drmem.c | 6 +----
.../platforms/pseries/hotplug-memory.c | 24 ++++++++++++-------
3 files changed, 17 insertions(+), 34 deletions(-)
diff --git a/arch/powerpc/include/asm/drmem.h b/arch/powerpc/include/asm/drmem.h
index 1ec6de1a88514..c711fe8901109 100644
--- a/arch/powerpc/include/asm/drmem.h
+++ b/arch/powerpc/include/asm/drmem.h
@@ -15,9 +15,6 @@ struct drmem_lmb {
u32 drc_index;
u32 aa_index;
u32 flags;
-#ifdef CONFIG_MEMORY_HOTPLUG
- int nid;
-#endif
};
struct drmem_lmb_info {
@@ -120,22 +117,4 @@ static inline void invalidate_lmb_associativity_index(struct drmem_lmb *lmb)
lmb->aa_index = 0xffffffff;
}
-#ifdef CONFIG_MEMORY_HOTPLUG
-static inline void lmb_set_nid(struct drmem_lmb *lmb)
-{
- lmb->nid = memory_add_physaddr_to_nid(lmb->base_addr);
-}
-static inline void lmb_clear_nid(struct drmem_lmb *lmb)
-{
- lmb->nid = -1;
-}
-#else
-static inline void lmb_set_nid(struct drmem_lmb *lmb)
-{
-}
-static inline void lmb_clear_nid(struct drmem_lmb *lmb)
-{
-}
-#endif
-
#endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/mm/drmem.c b/arch/powerpc/mm/drmem.c
index 59327cefbc6a6..873fcfc7b8756 100644
--- a/arch/powerpc/mm/drmem.c
+++ b/arch/powerpc/mm/drmem.c
@@ -362,10 +362,8 @@ static void __init init_drmem_v1_lmbs(const __be32 *prop)
if (!drmem_info->lmbs)
return;
- for_each_drmem_lmb(lmb) {
+ for_each_drmem_lmb(lmb)
read_drconf_v1_cell(lmb, &prop);
- lmb_set_nid(lmb);
- }
}
static void __init init_drmem_v2_lmbs(const __be32 *prop)
@@ -410,8 +408,6 @@ static void __init init_drmem_v2_lmbs(const __be32 *prop)
lmb->aa_index = dr_cell.aa_index;
lmb->flags = dr_cell.flags;
-
- lmb_set_nid(lmb);
}
}
}
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 8b748690dac22..9f236149b4027 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -356,25 +356,32 @@ static int dlpar_add_lmb(struct drmem_lmb *);
static int dlpar_remove_lmb(struct drmem_lmb *lmb)
{
+ struct memory_block *mem_block;
unsigned long block_sz;
int rc;
if (!lmb_is_removable(lmb))
return -EINVAL;
+ mem_block = lmb_to_memblock(lmb);
+ if (mem_block == NULL)
+ return -EINVAL;
+
rc = dlpar_offline_lmb(lmb);
- if (rc)
+ if (rc) {
+ put_device(&mem_block->dev);
return rc;
+ }
block_sz = pseries_memory_block_size();
- __remove_memory(lmb->nid, lmb->base_addr, block_sz);
+ __remove_memory(mem_block->nid, lmb->base_addr, block_sz);
+ put_device(&mem_block->dev);
/* Update memory regions for memory remove */
memblock_remove(lmb->base_addr, block_sz);
invalidate_lmb_associativity_index(lmb);
- lmb_clear_nid(lmb);
lmb->flags &= ~DRCONF_MEM_ASSIGNED;
return 0;
@@ -631,7 +638,7 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index)
static int dlpar_add_lmb(struct drmem_lmb *lmb)
{
unsigned long block_sz;
- int rc;
+ int nid, rc;
if (lmb->flags & DRCONF_MEM_ASSIGNED)
return -EINVAL;
@@ -642,11 +649,13 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
return rc;
}
- lmb_set_nid(lmb);
block_sz = memory_block_size_bytes();
+ /* Find the node id for this address. */
+ nid = memory_add_physaddr_to_nid(lmb->base_addr);
+
/* Add the memory */
- rc = __add_memory(lmb->nid, lmb->base_addr, block_sz);
+ rc = __add_memory(nid, lmb->base_addr, block_sz);
if (rc) {
invalidate_lmb_associativity_index(lmb);
return rc;
@@ -654,9 +663,8 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
rc = dlpar_online_lmb(lmb);
if (rc) {
- __remove_memory(lmb->nid, lmb->base_addr, block_sz);
+ __remove_memory(nid, lmb->base_addr, block_sz);
invalidate_lmb_associativity_index(lmb);
- lmb_clear_nid(lmb);
} else {
lmb->flags |= DRCONF_MEM_ASSIGNED;
}
--
2.25.1
From: Neeraj Upadhyay <[email protected]>
[ Upstream commit 9c39245382de4d52a122641952900709d4a9950b ]
On callback overload, it is necessary to quickly detect idle CPUs,
and rcu_gp_fqs_check_wake() checks for this condition. Unfortunately,
the code following the call to this function does not repeat this check,
which means that in reality no actual quiescent-state forcing, instead
only a couple of quick and pointless wakeups at the beginning of the
grace period.
This commit therefore adds a check for the RCU_GP_FLAG_OVLD flag in
the post-wakeup "if" statement in rcu_gp_fqs_loop().
Fixes: 1fca4d12f4637 ("rcu: Expedite first two FQS scans under callback-overload conditions")
Reviewed-by: Joel Fernandes (Google) <[email protected]>
Signed-off-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/tree.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 1e9e500ff7906..572a79b1a8510 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -1882,7 +1882,7 @@ static void rcu_gp_fqs_loop(void)
break;
/* If time for quiescent-state forcing, do it. */
if (!time_after(rcu_state.jiffies_force_qs, jiffies) ||
- (gf & RCU_GP_FLAG_FQS)) {
+ (gf & (RCU_GP_FLAG_FQS | RCU_GP_FLAG_OVLD))) {
trace_rcu_grace_period(rcu_state.name, rcu_state.gp_seq,
TPS("fqsstart"));
rcu_gp_fqs(first_gp_fqs);
--
2.25.1
From: Valentin Vidic <[email protected]>
[ Upstream commit 3af5f0f5c74ecbaf757ef06c3f80d56751277637 ]
kmalloc returns KSEG0 addresses so convert back from KSEG1
in kfree. Also make sure array is freed when the driver is
unloaded from the kernel.
Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC")
Signed-off-by: Valentin Vidic <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/korina.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index 03e034918d147..af441d699a57a 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -1113,7 +1113,7 @@ static int korina_probe(struct platform_device *pdev)
return rc;
probe_err_register:
- kfree(lp->td_ring);
+ kfree(KSEG0ADDR(lp->td_ring));
probe_err_td_ring:
iounmap(lp->tx_dma_regs);
probe_err_dma_tx:
@@ -1133,6 +1133,7 @@ static int korina_remove(struct platform_device *pdev)
iounmap(lp->eth_regs);
iounmap(lp->rx_dma_regs);
iounmap(lp->tx_dma_regs);
+ kfree(KSEG0ADDR(lp->td_ring));
unregister_netdev(bif->dev);
free_netdev(bif->dev);
--
2.25.1
From: Ralph Campbell <[email protected]>
[ Upstream commit 9a137153fc8798a89d8fce895cd0a06ea5b8e37c ]
The code in mc_handle_swap_pte() checks for non_swap_entry() and returns
NULL before checking is_device_private_entry() so device private pages are
never handled. Fix this by checking for non_swap_entry() after handling
device private swap PTEs.
I assume the memory cgroup accounting would be off somehow when moving
a process to another memory cgroup. Currently, the device private page
is charged like a normal anonymous page when allocated and is uncharged
when the page is freed so I think that path is OK.
Signed-off-by: Ralph Campbell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Ira Weiny <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
xFixes: c733a82874a7 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE")
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/memcontrol.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 13f559af1ab6a..6795bdf662566 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -5276,7 +5276,7 @@ static struct page *mc_handle_swap_pte(struct vm_area_struct *vma,
struct page *page = NULL;
swp_entry_t ent = pte_to_swp_entry(ptent);
- if (!(mc.flags & MOVE_ANON) || non_swap_entry(ent))
+ if (!(mc.flags & MOVE_ANON))
return NULL;
/*
@@ -5295,6 +5295,9 @@ static struct page *mc_handle_swap_pte(struct vm_area_struct *vma,
return page;
}
+ if (non_swap_entry(ent))
+ return NULL;
+
/*
* Because lookup_swap_cache() updates some statistics counter,
* we call find_get_page() with swapper_space directly.
--
2.25.1
From: Suren Baghdasaryan <[email protected]>
[ Upstream commit 67197a4f28d28d0b073ab0427b03cb2ee5382578 ]
Currently __set_oom_adj loops through all processes in the system to keep
oom_score_adj and oom_score_adj_min in sync between processes sharing
their mm. This is done for any task with more that one mm_users, which
includes processes with multiple threads (sharing mm and signals).
However for such processes the loop is unnecessary because their signal
structure is shared as well.
Android updates oom_score_adj whenever a tasks changes its role
(background/foreground/...) or binds to/unbinds from a service, making it
more/less important. Such operation can happen frequently. We noticed
that updates to oom_score_adj became more expensive and after further
investigation found out that the patch mentioned in "Fixes" introduced a
regression. Using Pixel 4 with a typical Android workload, write time to
oom_score_adj increased from ~3.57us to ~362us. Moreover this regression
linearly depends on the number of multi-threaded processes running on the
system.
Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with
(CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use
MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj
update should be synchronized between multiple processes. To prevent
races between clone() and __set_oom_adj(), when oom_score_adj of the
process being cloned might be modified from userspace, we use
oom_adj_mutex. Its scope is changed to global.
The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for
the case of vfork(). To prevent performance regressions of vfork(), we
skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is
specified. Clearing the MMF_MULTIPROCESS flag (when the last process
sharing the mm exits) is left out of this patch to keep it simple and
because it is believed that this threading model is rare. Should there
ever be a need for optimizing that case as well, it can be done by hooking
into the exit path, likely following the mm_update_next_owner pattern.
With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being
quite rare, the regression is gone after the change is applied.
[[email protected]: v3]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj")
Reported-by: Tim Murray <[email protected]>
Suggested-by: Michal Hocko <[email protected]>
Signed-off-by: Suren Baghdasaryan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Eugene Syromiatnikov <[email protected]>
Cc: Christian Kellner <[email protected]>
Cc: Adrian Reber <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Alexey Gladkov <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Daniel Jordan <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Bernd Edlinger <[email protected]>
Cc: John Johansen <[email protected]>
Cc: Yafang Shao <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Debugged-by: Minchan Kim <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/proc/base.c | 3 +--
include/linux/oom.h | 1 +
include/linux/sched/coredump.h | 1 +
kernel/fork.c | 21 +++++++++++++++++++++
mm/oom_kill.c | 2 ++
5 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index d86c0afc8a859..297ff606ae0f6 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1046,7 +1046,6 @@ static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count,
static int __set_oom_adj(struct file *file, int oom_adj, bool legacy)
{
- static DEFINE_MUTEX(oom_adj_mutex);
struct mm_struct *mm = NULL;
struct task_struct *task;
int err = 0;
@@ -1086,7 +1085,7 @@ static int __set_oom_adj(struct file *file, int oom_adj, bool legacy)
struct task_struct *p = find_lock_task_mm(task);
if (p) {
- if (atomic_read(&p->mm->mm_users) > 1) {
+ if (test_bit(MMF_MULTIPROCESS, &p->mm->flags)) {
mm = p->mm;
mmgrab(mm);
}
diff --git a/include/linux/oom.h b/include/linux/oom.h
index c696c265f0193..b9df34326772c 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -55,6 +55,7 @@ struct oom_control {
};
extern struct mutex oom_lock;
+extern struct mutex oom_adj_mutex;
static inline void set_current_oom_origin(void)
{
diff --git a/include/linux/sched/coredump.h b/include/linux/sched/coredump.h
index ecdc6542070f1..dfd82eab29025 100644
--- a/include/linux/sched/coredump.h
+++ b/include/linux/sched/coredump.h
@@ -72,6 +72,7 @@ static inline int get_dumpable(struct mm_struct *mm)
#define MMF_DISABLE_THP 24 /* disable THP for all VMAs */
#define MMF_OOM_VICTIM 25 /* mm is the oom victim */
#define MMF_OOM_REAP_QUEUED 26 /* mm was queued for oom_reaper */
+#define MMF_MULTIPROCESS 27 /* mm is shared between processes */
#define MMF_DISABLE_THP_MASK (1 << MMF_DISABLE_THP)
#define MMF_INIT_MASK (MMF_DUMPABLE_MASK | MMF_DUMP_FILTER_MASK |\
diff --git a/kernel/fork.c b/kernel/fork.c
index efc5493203ae0..0074bbe8c66f1 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1830,6 +1830,25 @@ static __always_inline void delayed_free_task(struct task_struct *tsk)
free_task(tsk);
}
+static void copy_oom_score_adj(u64 clone_flags, struct task_struct *tsk)
+{
+ /* Skip if kernel thread */
+ if (!tsk->mm)
+ return;
+
+ /* Skip if spawning a thread or using vfork */
+ if ((clone_flags & (CLONE_VM | CLONE_THREAD | CLONE_VFORK)) != CLONE_VM)
+ return;
+
+ /* We need to synchronize with __set_oom_adj */
+ mutex_lock(&oom_adj_mutex);
+ set_bit(MMF_MULTIPROCESS, &tsk->mm->flags);
+ /* Update the values in case they were changed after copy_signal */
+ tsk->signal->oom_score_adj = current->signal->oom_score_adj;
+ tsk->signal->oom_score_adj_min = current->signal->oom_score_adj_min;
+ mutex_unlock(&oom_adj_mutex);
+}
+
/*
* This creates a new process as a copy of the old one,
* but does not actually start it yet.
@@ -2310,6 +2329,8 @@ static __latent_entropy struct task_struct *copy_process(
trace_task_newtask(p, clone_flags);
uprobe_copy_process(p, clone_flags);
+ copy_oom_score_adj(clone_flags, p);
+
return p;
bad_fork_cancel_cgroup:
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 6e94962893ee8..67e5bb0900b37 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -64,6 +64,8 @@ int sysctl_oom_dump_tasks = 1;
* and mark_oom_victim
*/
DEFINE_MUTEX(oom_lock);
+/* Serializes oom_score_adj and oom_score_adj_min updates */
+DEFINE_MUTEX(oom_adj_mutex);
static inline bool is_memcg_oom(struct oom_control *oc)
{
--
2.25.1
From: Darrick J. Wong <[email protected]>
[ Upstream commit acd1ac3aa22fd58803a12d26b1ab7f70232f8d8d ]
If userspace asked fsmap to count the number of entries, we cannot
return more than UINT_MAX entries because fmh_entries is u32.
Therefore, stop counting if we hit this limit or else we will waste time
to return truncated results.
Fixes: e89c041338ed ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/xfs/xfs_fsmap.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/xfs/xfs_fsmap.c b/fs/xfs/xfs_fsmap.c
index 4eebcec4aae6c..aa36e7daf82c4 100644
--- a/fs/xfs/xfs_fsmap.c
+++ b/fs/xfs/xfs_fsmap.c
@@ -256,6 +256,9 @@ xfs_getfsmap_helper(
/* Are we just counting mappings? */
if (info->head->fmh_count == 0) {
+ if (info->head->fmh_entries == UINT_MAX)
+ return -ECANCELED;
+
if (rec_daddr > info->next_daddr)
info->head->fmh_entries++;
--
2.25.1
From: Michal Kalderon <[email protected]>
[ Upstream commit 098e345a1a8faaad6e4e54d138773466cecc45d4 ]
The qedr_qp structure wasn't freed when the protocol was RoCE. kmemleak
output when running basic RoCE scenario.
unreferenced object 0xffff927ad7e22c00 (size 1024):
comm "ib_send_bw", pid 7082, jiffies 4384133693 (age 274.698s)
hex dump (first 32 bytes):
00 b0 cd a2 79 92 ff ff 00 3f a1 a2 79 92 ff ff ....y....?..y...
00 ee 5c dd 80 92 ff ff 00 f6 5c dd 80 92 ff ff ..\.......\.....
backtrace:
[<00000000b2ba0f35>] qedr_create_qp+0xb3/0x6c0 [qedr]
[<00000000e85a43dd>] ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x555/0xad0 [ib_uverbs]
[<00000000fee4d029>] ib_uverbs_cmd_verbs+0xa5a/0xb80 [ib_uverbs]
[<000000005d622660>] ib_uverbs_ioctl+0xa4/0x110 [ib_uverbs]
[<00000000eb4cdc71>] ksys_ioctl+0x87/0xc0
[<00000000abe6b23a>] __x64_sys_ioctl+0x16/0x20
[<0000000046e7cef4>] do_syscall_64+0x4d/0x90
[<00000000c6948f76>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 1212767e23bb ("qedr: Add wrapping generic structure for qpidr and adjust idr routines.")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/qedr/verbs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 8092821680438..c6165c6390a71 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -2753,6 +2753,8 @@ int qedr_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata)
if (rdma_protocol_iwarp(&dev->ibdev, 1))
qedr_iw_qp_rem_ref(&qp->ibqp);
+ else
+ kfree(qp);
return 0;
}
--
2.25.1
From: Leon Romanovsky <[email protected]>
[ Upstream commit 4b916ed9f9e85f705213ca8d69771d3c1cd6ee5a ]
The SRQ can be destroyed right before mlx5_cmd_get_srq is called.
In such case the latter will return NULL instead of expected SRQ.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/cq.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/cq.c b/drivers/infiniband/hw/mlx5/cq.c
index 0c18cb6a2f148..3ca379513d0e6 100644
--- a/drivers/infiniband/hw/mlx5/cq.c
+++ b/drivers/infiniband/hw/mlx5/cq.c
@@ -168,7 +168,7 @@ static void handle_responder(struct ib_wc *wc, struct mlx5_cqe64 *cqe,
{
enum rdma_link_layer ll = rdma_port_get_link_layer(qp->ibqp.device, 1);
struct mlx5_ib_dev *dev = to_mdev(qp->ibqp.device);
- struct mlx5_ib_srq *srq;
+ struct mlx5_ib_srq *srq = NULL;
struct mlx5_ib_wq *wq;
u16 wqe_ctr;
u8 roce_packet_type;
@@ -180,7 +180,8 @@ static void handle_responder(struct ib_wc *wc, struct mlx5_cqe64 *cqe,
if (qp->ibqp.xrcd) {
msrq = mlx5_cmd_get_srq(dev, be32_to_cpu(cqe->srqn));
- srq = to_mibsrq(msrq);
+ if (msrq)
+ srq = to_mibsrq(msrq);
} else {
srq = to_msrq(qp->ibqp.srq);
}
--
2.25.1
From: Arnaldo Carvalho de Melo <[email protected]>
[ Upstream commit 6c014694b1d2702cdc736d17b60746e7b95ba664 ]
We were failing that due to GTK2+ and then for the ZSTD test, which made
test-all.c, the fast path feature detection file to fail and thus
trigger building all of the feature tests, slowing down the test.
Eventually the ZSTD test would be built and would succeed, since it had
the needed -lzstd, avoiding:
$ cat /tmp/build/perf/feature/test-all.make.output
/usr/bin/ld: /tmp/ccRRJQ4u.o: in function `main_test_libzstd':
/home/acme/git/perf/tools/build/feature/test-libzstd.c:8: undefined reference to `ZSTD_createCStream'
/usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libzstd.c:9: undefined reference to `ZSTD_freeCStream'
collect2: error: ld returned 1 exit status
$
Fix it by adding -lzstd to the test-all target.
Now I need an entry to 'perf test' to make sure that
/tmp/build/perf/feature/test-all.make.output is empty...
Fixes: 3b1c5d9659718263 ("tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD defines")
Reviewed-by: Alexei Budankov <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/build/feature/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index 1796a09365f5d..85d341e25eaec 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -89,7 +89,7 @@ __BUILDXX = $(CXX) $(CXXFLAGS) -MD -Wall -Werror -o $@ $(patsubst %.bin,%.cpp,$(
###############################
$(OUTPUT)test-all.bin:
- $(BUILD) -fstack-protector-all -O2 -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -I/usr/include/slang -lslang $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz -llzma
+ $(BUILD) -fstack-protector-all -O2 -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -I/usr/include/slang -lslang $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz -llzma -lzstd
$(OUTPUT)test-hello.bin:
$(BUILD)
--
2.25.1
From: Greg Ungerer <[email protected]>
[ Upstream commit 322c512f476f07e960cecd447ef22c15bed0e5f1 ]
The mere fact that the kernel has the MMC subsystem enabled (CONFIG_MMC
enabled) does not mean that the underlying hardware platform has the
SDHC hardware present. Within the ColdFire hardware defines that is
signified by MCFSDHC_BASE being defined with an address.
The platform data for the ColdFire parts is including the SDHC hardware
if CONFIG_MMC is enabled, instead of MCFSDHC_BASE. This means that if
you are compiling for a ColdFire target that does not support SDHC but
enable CONFIG_MMC you will fail to compile with errors like this:
arch/m68k/coldfire/device.c:565:12: error: ‘MCFSDHC_BASE’ undeclared here (not in a function)
.start = MCFSDHC_BASE,
^
arch/m68k/coldfire/device.c:566:25: error: ‘MCFSDHC_SIZE’ undeclared here (not in a function)
.end = MCFSDHC_BASE + MCFSDHC_SIZE - 1,
^
arch/m68k/coldfire/device.c:569:12: error: ‘MCF_IRQ_SDHC’ undeclared here (not in a function)
.start = MCF_IRQ_SDHC,
^
Make the SDHC platform support depend on MCFSDHC_BASE, that is only
include it if the specific ColdFire SoC has that hardware module.
Fixes: 991f5c4dd2422881 ("m68k: mcf5441x: add support for esdhc mmc controller")
Signed-off-by: Greg Ungerer <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Angelo Dureghello <[email protected]>
Tested-by: Angelo Dureghello <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/coldfire/device.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
index 9ef4ec0aea008..59f7dfe50a4d0 100644
--- a/arch/m68k/coldfire/device.c
+++ b/arch/m68k/coldfire/device.c
@@ -554,7 +554,7 @@ static struct platform_device mcf_edma = {
};
#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
-#if IS_ENABLED(CONFIG_MMC)
+#ifdef MCFSDHC_BASE
static struct mcf_esdhc_platform_data mcf_esdhc_data = {
.max_bus_width = 4,
.cd_type = ESDHC_CD_NONE,
@@ -579,7 +579,7 @@ static struct platform_device mcf_esdhc = {
.resource = mcf_esdhc_resources,
.dev.platform_data = &mcf_esdhc_data,
};
-#endif /* IS_ENABLED(CONFIG_MMC) */
+#endif /* MCFSDHC_BASE */
static struct platform_device *mcf_devices[] __initdata = {
&mcf_uart,
@@ -613,7 +613,7 @@ static struct platform_device *mcf_devices[] __initdata = {
#if IS_ENABLED(CONFIG_MCF_EDMA)
&mcf_edma,
#endif
-#if IS_ENABLED(CONFIG_MMC)
+#ifdef MCFSDHC_BASE
&mcf_esdhc,
#endif
};
--
2.25.1
From: Michal Kalderon <[email protected]>
[ Upstream commit a379ad54e55a12618cae7f6333fd1b3071de9606 ]
dev->attr.page_size_caps was used uninitialized when setting device
attributes
Fixes: ec72fce401c6 ("qedr: Add support for RoCE HW init")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/qedr/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c
index ccaedfd53e49e..679766abb436e 100644
--- a/drivers/infiniband/hw/qedr/main.c
+++ b/drivers/infiniband/hw/qedr/main.c
@@ -601,7 +601,7 @@ static int qedr_set_device_attr(struct qedr_dev *dev)
qed_attr = dev->ops->rdma_query_device(dev->rdma_ctx);
/* Part 2 - check capabilities */
- page_size = ~dev->attr.page_size_caps + 1;
+ page_size = ~qed_attr->page_size_caps + 1;
if (page_size > PAGE_SIZE) {
DP_ERR(dev,
"Kernel PAGE_SIZE is %ld which is smaller than minimum page size (%d) required by qedr\n",
--
2.25.1
From: Michal Kalderon <[email protected]>
[ Upstream commit 8a5a10a1a74465065c75d9de1aa6685e1f1aa117 ]
In iWARP, accept could be called after a QP is already destroyed. In this
case an error should be returned and not success.
Fixes: 82af6d19d8d9 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/qedr/qedr_iw_cm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/qedr/qedr_iw_cm.c b/drivers/infiniband/hw/qedr/qedr_iw_cm.c
index 97fc7dd353b04..c7169d2c69e5b 100644
--- a/drivers/infiniband/hw/qedr/qedr_iw_cm.c
+++ b/drivers/infiniband/hw/qedr/qedr_iw_cm.c
@@ -736,7 +736,7 @@ int qedr_iw_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
struct qedr_dev *dev = ep->dev;
struct qedr_qp *qp;
struct qed_iwarp_accept_in params;
- int rc = 0;
+ int rc;
DP_DEBUG(dev, QEDR_MSG_IWARP, "Accept on qpid=%d\n", conn_param->qpn);
@@ -759,8 +759,10 @@ int qedr_iw_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
params.ord = conn_param->ord;
if (test_and_set_bit(QEDR_IWARP_CM_WAIT_FOR_CONNECT,
- &qp->iwarp_cm_flags))
+ &qp->iwarp_cm_flags)) {
+ rc = -EINVAL;
goto err; /* QP already destroyed */
+ }
rc = dev->ops->iwarp_accept(dev->rdma_ctx, ¶ms);
if (rc) {
--
2.25.1
From: Thiago Jung Bauermann <[email protected]>
[ Upstream commit eae9eec476d13fad9af6da1f44a054ee02b7b161 ]
POWER secure guests (i.e., guests which use the Protected Execution
Facility) need to use SWIOTLB to be able to do I/O with the
hypervisor, but they don't need the SWIOTLB memory to be in low
addresses since the hypervisor doesn't have any addressing limitation.
This solves a SWIOTLB initialization problem we are seeing in secure
guests with 128 GB of RAM: they are configured with 4 GB of
crashkernel reserved memory, which leaves no space for SWIOTLB in low
addresses.
To do this, we use mostly the same code as swiotlb_init(), but
allocate the buffer using memblock_alloc() instead of
memblock_alloc_low().
Fixes: 2efbc58f157a ("powerpc/pseries/svm: Force SWIOTLB for secure guests")
Signed-off-by: Thiago Jung Bauermann <[email protected]>
Reviewed-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/svm.h | 4 ++++
arch/powerpc/mm/mem.c | 6 +++++-
arch/powerpc/platforms/pseries/svm.c | 26 ++++++++++++++++++++++++++
3 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/svm.h b/arch/powerpc/include/asm/svm.h
index 85580b30aba48..7546402d796af 100644
--- a/arch/powerpc/include/asm/svm.h
+++ b/arch/powerpc/include/asm/svm.h
@@ -15,6 +15,8 @@ static inline bool is_secure_guest(void)
return mfmsr() & MSR_S;
}
+void __init svm_swiotlb_init(void);
+
void dtl_cache_ctor(void *addr);
#define get_dtl_cache_ctor() (is_secure_guest() ? dtl_cache_ctor : NULL)
@@ -25,6 +27,8 @@ static inline bool is_secure_guest(void)
return false;
}
+static inline void svm_swiotlb_init(void) {}
+
#define get_dtl_cache_ctor() NULL
#endif /* CONFIG_PPC_SVM */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index c2c11eb8dcfca..0f21bcb16405a 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -50,6 +50,7 @@
#include <asm/swiotlb.h>
#include <asm/rtas.h>
#include <asm/kasan.h>
+#include <asm/svm.h>
#include <mm/mmu_decl.h>
@@ -290,7 +291,10 @@ void __init mem_init(void)
* back to to-down.
*/
memblock_set_bottom_up(true);
- swiotlb_init(0);
+ if (is_secure_guest())
+ svm_swiotlb_init();
+ else
+ swiotlb_init(0);
#endif
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
diff --git a/arch/powerpc/platforms/pseries/svm.c b/arch/powerpc/platforms/pseries/svm.c
index 40c0637203d5b..81085eb8f2255 100644
--- a/arch/powerpc/platforms/pseries/svm.c
+++ b/arch/powerpc/platforms/pseries/svm.c
@@ -7,6 +7,7 @@
*/
#include <linux/mm.h>
+#include <linux/memblock.h>
#include <asm/machdep.h>
#include <asm/svm.h>
#include <asm/swiotlb.h>
@@ -34,6 +35,31 @@ static int __init init_svm(void)
}
machine_early_initcall(pseries, init_svm);
+/*
+ * Initialize SWIOTLB. Essentially the same as swiotlb_init(), except that it
+ * can allocate the buffer anywhere in memory. Since the hypervisor doesn't have
+ * any addressing limitation, we don't need to allocate it in low addresses.
+ */
+void __init svm_swiotlb_init(void)
+{
+ unsigned char *vstart;
+ unsigned long bytes, io_tlb_nslabs;
+
+ io_tlb_nslabs = (swiotlb_size_or_default() >> IO_TLB_SHIFT);
+ io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
+
+ bytes = io_tlb_nslabs << IO_TLB_SHIFT;
+
+ vstart = memblock_alloc(PAGE_ALIGN(bytes), PAGE_SIZE);
+ if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, false))
+ return;
+
+ if (io_tlb_start)
+ memblock_free_early(io_tlb_start,
+ PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
+ panic("SVM: Cannot allocate SWIOTLB buffer");
+}
+
int set_memory_encrypted(unsigned long addr, int numpages)
{
if (!PAGE_ALIGNED(addr))
--
2.25.1
From: Ravi Bangoria <[email protected]>
[ Upstream commit 58da5984d2ea6d95f3f9d9e8dd9f7e1b0dddfb3c ]
There are couple of places where we set len but not hw_len. For
ptrace/perf watchpoints, when CONFIG_HAVE_HW_BREAKPOINT=Y, hw_len
will be calculated and set internally while parsing watchpoint.
But when CONFIG_HAVE_HW_BREAKPOINT=N, we need to manually set
'hw_len'. Similarly for xmon as well, hw_len needs to be set
directly.
Fixes: b57aeab811db ("powerpc/watchpoint: Fix length calculation for unaligned target")
Signed-off-by: Ravi Bangoria <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 1 +
arch/powerpc/xmon/xmon.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
index 697c7e4b5877f..8bd8d8de5c40b 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-noadv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -219,6 +219,7 @@ long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_inf
brk.address = ALIGN_DOWN(bp_info->addr, HW_BREAKPOINT_SIZE);
brk.type = HW_BRK_TYPE_TRANSLATE;
brk.len = DABR_MAX_LEN;
+ brk.hw_len = DABR_MAX_LEN;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
brk.type |= HW_BRK_TYPE_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 7efe4bc3ccf63..ac5862cee142a 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -962,6 +962,7 @@ static void insert_cpu_bpts(void)
brk.address = dabr[i].address;
brk.type = (dabr[i].enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
brk.len = 8;
+ brk.hw_len = 8;
__set_breakpoint(i, &brk);
}
}
--
2.25.1
From: Finn Thain <[email protected]>
[ Upstream commit 66943005cc41f48e4d05614e8f76c0ca1812f0fd ]
According to the MPC750 Users Manual, the SITV value in Thermal
Management Register 3 is 13 bits long. The present code calculates the
SITV value as 60 * 500 cycles. This would overflow to give 10 us on
a 500 MHz CPU rather than the intended 60 us. (But according to the
Microprocessor Datasheet, there is also a factor of 266 that has to be
applied to this value on certain parts i.e. speed sort above 266 MHz.)
Always use the maximum cycle count, as recommended by the Datasheet.
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <[email protected]>
Tested-by: Stan Johnson <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/reg.h | 2 +-
arch/powerpc/kernel/tau_6xx.c | 12 ++++--------
2 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 88e6c78100d9b..c750afc62887c 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -815,7 +815,7 @@
#define THRM1_TIN (1 << 31)
#define THRM1_TIV (1 << 30)
#define THRM1_THRES(x) ((x&0x7f)<<23)
-#define THRM3_SITV(x) ((x&0x3fff)<<1)
+#define THRM3_SITV(x) ((x & 0x1fff) << 1)
#define THRM1_TID (1<<2)
#define THRM1_TIE (1<<1)
#define THRM1_V (1<<0)
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index e2ab8a111b693..976d5bc1b5176 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -178,15 +178,11 @@ static void tau_timeout(void * info)
* complex sleep code needs to be added. One mtspr every time
* tau_timeout is called is probably not a big deal.
*
- * Enable thermal sensor and set up sample interval timer
- * need 20 us to do the compare.. until a nice 'cpu_speed' function
- * call is implemented, just assume a 500 mhz clock. It doesn't really
- * matter if we take too long for a compare since it's all interrupt
- * driven anyway.
- *
- * use a extra long time.. (60 us @ 500 mhz)
+ * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
+ * recommends that "the maximum value be set in THRM3 under all
+ * conditions."
*/
- mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
+ mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
local_irq_restore(flags);
}
--
2.25.1
From: Finn Thain <[email protected]>
[ Upstream commit 420ab2bc7544d978a5d0762ee736412fe9c796ab ]
The commentary at the call site seems to disagree with the code. The
conditional prevents calling set_thresholds() via the exception handler,
which appears to crash. Perhaps that's because it immediately triggers
another TAU exception. Anyway, calling set_thresholds() from TAUupdate()
is redundant because tau_timeout() does so.
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <[email protected]>
Tested-by: Stan Johnson <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/d7c7ee33232cf72a6a6bbb6ef05838b2e2b113c0.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/tau_6xx.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index 268205cc347da..b8d7e7d498e0a 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -110,11 +110,6 @@ static void TAUupdate(int cpu)
#ifdef DEBUG
printk("grew = %d\n", tau[cpu].grew);
#endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
- set_thresholds(cpu);
-#endif
-
}
#ifdef CONFIG_TAU_INT
--
2.25.1
From: Michal Kalderon <[email protected]>
[ Upstream commit fbf58026b2256e9cd5f241a4801d79d3b2b7b89d ]
commit 59e8970b3798 ("RDMA/qedr: Return max inline data in QP query
result") changed query_qp max_inline size to return the max roce inline
size. When iwarp was introduced, this should have been modified to return
the max inline size based on protocol. This size is cached in the device
attributes
Fixes: 69ad0e7fe845 ("RDMA/qedr: Add support for iWARP in user space")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/qedr/verbs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 7de96ac4ce543..820e351277d1b 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -2637,7 +2637,7 @@ int qedr_query_qp(struct ib_qp *ibqp,
qp_attr->cap.max_recv_wr = qp->rq.max_wr;
qp_attr->cap.max_send_sge = qp->sq.max_sges;
qp_attr->cap.max_recv_sge = qp->rq.max_sges;
- qp_attr->cap.max_inline_data = ROCE_REQ_MAX_INLINE_DATA_SIZE;
+ qp_attr->cap.max_inline_data = dev->attr.max_inline;
qp_init_attr->cap = qp_attr->cap;
qp_attr->ah_attr.type = RDMA_AH_ATTR_TYPE_ROCE;
--
2.25.1
From: Finn Thain <[email protected]>
[ Upstream commit 5e3119e15fed5b9a9a7e528665ff098a4a8dbdbc ]
According to Freescale's documentation, MPC74XX processors have an
erratum that prevents the TAU interrupt from working, so don't try to
use it when running on those processors.
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <[email protected]>
Tested-by: Stan Johnson <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/c281611544768e758bd58fe812cf702a5bd2d042.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/tau_6xx.c | 33 ++++++++++++++-------------------
arch/powerpc/platforms/Kconfig | 5 ++---
2 files changed, 16 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index b8d7e7d498e0a..614b5b272d9c6 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -40,6 +40,8 @@ static struct tau_temp
unsigned char grew;
} tau[NR_CPUS];
+static bool tau_int_enable;
+
#undef DEBUG
/* TODO: put these in a /proc interface, with some sanity checks, and maybe
@@ -54,22 +56,13 @@ static struct tau_temp
static void set_thresholds(unsigned long cpu)
{
-#ifdef CONFIG_TAU_INT
- /*
- * setup THRM1,
- * threshold, valid bit, enable interrupts, interrupt when below threshold
- */
- mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
+ u32 maybe_tie = tau_int_enable ? THRM1_TIE : 0;
- /* setup THRM2,
- * threshold, valid bit, enable interrupts, interrupt when above threshold
- */
- mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
-#else
- /* same thing but don't enable interrupts */
- mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID);
- mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V);
-#endif
+ /* setup THRM1, threshold, valid bit, interrupt when below threshold */
+ mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | maybe_tie | THRM1_TID);
+
+ /* setup THRM2, threshold, valid bit, interrupt when above threshold */
+ mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | maybe_tie);
}
static void TAUupdate(int cpu)
@@ -142,9 +135,8 @@ static void tau_timeout(void * info)
local_irq_save(flags);
cpu = smp_processor_id();
-#ifndef CONFIG_TAU_INT
- TAUupdate(cpu);
-#endif
+ if (!tau_int_enable)
+ TAUupdate(cpu);
size = tau[cpu].high - tau[cpu].low;
if (size > min_window && ! tau[cpu].grew) {
@@ -225,6 +217,9 @@ static int __init TAU_init(void)
return 1;
}
+ tau_int_enable = IS_ENABLED(CONFIG_TAU_INT) &&
+ !strcmp(cur_cpu_spec->platform, "ppc750");
+
tau_workq = alloc_workqueue("tau", WQ_UNBOUND, 1, 0);
if (!tau_workq)
return -ENOMEM;
@@ -234,7 +229,7 @@ static int __init TAU_init(void)
queue_work(tau_workq, &tau_work);
pr_info("Thermal assist unit using %s, shrink_timer: %d ms\n",
- IS_ENABLED(CONFIG_TAU_INT) ? "interrupts" : "workqueue", shrink_timer);
+ tau_int_enable ? "interrupts" : "workqueue", shrink_timer);
tau_initialized = 1;
return 0;
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index fb7515b4fa9c6..9fe36f0b54c1a 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -223,9 +223,8 @@ config TAU
temperature within 2-4 degrees Celsius. This option shows the current
on-die temperature in /proc/cpuinfo if the cpu supports it.
- Unfortunately, on some chip revisions, this sensor is very inaccurate
- and in many cases, does not work at all, so don't assume the cpu
- temp is actually what /proc/cpuinfo says it is.
+ Unfortunately, this sensor is very inaccurate when uncalibrated, so
+ don't assume the cpu temp is actually what /proc/cpuinfo says it is.
config TAU_INT
bool "Interrupt driven TAU driver (DANGEROUS)"
--
2.25.1
From: Finn Thain <[email protected]>
[ Upstream commit e63d6fb5637e92725cf143559672a34b706bca4f ]
Enabling CONFIG_TAU_INT causes random crashes:
Unrecoverable exception 1700 at c0009414 (msr=1000)
Oops: Unrecoverable exception, sig: 6 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5
NIP: c0009414 LR: c0009414 CTR: c00116fc
REGS: c0799eb8 TRAP: 1700 Not tainted (5.7.0-pmac-00043-gd5f545e1a8593)
MSR: 00001000 <ME> CR: 22000228 XER: 00000100
GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032
GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04
GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c
NIP [c0009414] arch_cpu_idle+0x24/0x6c
LR [c0009414] arch_cpu_idle+0x24/0x6c
Call Trace:
[c0799f70] [00000001] 0x1 (unreliable)
[c0799f80] [c0060990] do_idle+0xd8/0x17c
[c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28
[c0799fb0] [c072d220] start_kernel+0x434/0x44c
[c0799ff0] [00003860] 0x3860
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6
XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6
---[ end trace 3a0c9b5cb216db6b ]---
Resolve this problem by disabling each THRMn comparator when handling
the associated THRMn interrupt and by disabling the TAU entirely when
updating THRMn thresholds.
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <[email protected]>
Tested-by: Stan Johnson <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/tau_6xx.c | 65 +++++++++++++---------------------
arch/powerpc/platforms/Kconfig | 9 ++---
2 files changed, 26 insertions(+), 48 deletions(-)
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index 614b5b272d9c6..0b4694b8d2482 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -42,8 +42,6 @@ static struct tau_temp
static bool tau_int_enable;
-#undef DEBUG
-
/* TODO: put these in a /proc interface, with some sanity checks, and maybe
* dynamic adjustment to minimize # of interrupts */
/* configurable values for step size and how much to expand the window when
@@ -67,42 +65,33 @@ static void set_thresholds(unsigned long cpu)
static void TAUupdate(int cpu)
{
- unsigned thrm;
-
-#ifdef DEBUG
- printk("TAUupdate ");
-#endif
+ u32 thrm;
+ u32 bits = THRM1_TIV | THRM1_TIN | THRM1_V;
/* if both thresholds are crossed, the step_sizes cancel out
* and the window winds up getting expanded twice. */
- if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
- if(thrm & THRM1_TIN){ /* crossed low threshold */
- if (tau[cpu].low >= step_size){
- tau[cpu].low -= step_size;
- tau[cpu].high -= (step_size - window_expand);
- }
- tau[cpu].grew = 1;
-#ifdef DEBUG
- printk("low threshold crossed ");
-#endif
+ thrm = mfspr(SPRN_THRM1);
+ if ((thrm & bits) == bits) {
+ mtspr(SPRN_THRM1, 0);
+
+ if (tau[cpu].low >= step_size) {
+ tau[cpu].low -= step_size;
+ tau[cpu].high -= (step_size - window_expand);
}
+ tau[cpu].grew = 1;
+ pr_debug("%s: low threshold crossed\n", __func__);
}
- if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
- if(thrm & THRM1_TIN){ /* crossed high threshold */
- if (tau[cpu].high <= 127-step_size){
- tau[cpu].low += (step_size - window_expand);
- tau[cpu].high += step_size;
- }
- tau[cpu].grew = 1;
-#ifdef DEBUG
- printk("high threshold crossed ");
-#endif
+ thrm = mfspr(SPRN_THRM2);
+ if ((thrm & bits) == bits) {
+ mtspr(SPRN_THRM2, 0);
+
+ if (tau[cpu].high <= 127 - step_size) {
+ tau[cpu].low += (step_size - window_expand);
+ tau[cpu].high += step_size;
}
+ tau[cpu].grew = 1;
+ pr_debug("%s: high threshold crossed\n", __func__);
}
-
-#ifdef DEBUG
- printk("grew = %d\n", tau[cpu].grew);
-#endif
}
#ifdef CONFIG_TAU_INT
@@ -127,17 +116,17 @@ void TAUException(struct pt_regs * regs)
static void tau_timeout(void * info)
{
int cpu;
- unsigned long flags;
int size;
int shrink;
- /* disabling interrupts *should* be okay */
- local_irq_save(flags);
cpu = smp_processor_id();
if (!tau_int_enable)
TAUupdate(cpu);
+ /* Stop thermal sensor comparisons and interrupts */
+ mtspr(SPRN_THRM3, 0);
+
size = tau[cpu].high - tau[cpu].low;
if (size > min_window && ! tau[cpu].grew) {
/* do an exponential shrink of half the amount currently over size */
@@ -159,18 +148,12 @@ static void tau_timeout(void * info)
set_thresholds(cpu);
- /*
- * Do the enable every time, since otherwise a bunch of (relatively)
- * complex sleep code needs to be added. One mtspr every time
- * tau_timeout is called is probably not a big deal.
- *
+ /* Restart thermal sensor comparisons and interrupts.
* The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
* recommends that "the maximum value be set in THRM3 under all
* conditions."
*/
mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
-
- local_irq_restore(flags);
}
static struct workqueue_struct *tau_workq;
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 9fe36f0b54c1a..b439b027a42f1 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -227,7 +227,7 @@ config TAU
don't assume the cpu temp is actually what /proc/cpuinfo says it is.
config TAU_INT
- bool "Interrupt driven TAU driver (DANGEROUS)"
+ bool "Interrupt driven TAU driver (EXPERIMENTAL)"
depends on TAU
help
The TAU supports an interrupt driven mode which causes an interrupt
@@ -235,12 +235,7 @@ config TAU_INT
to get notified the temp has exceeded a range. With this option off,
a timer is used to re-check the temperature periodically.
- However, on some cpus it appears that the TAU interrupt hardware
- is buggy and can cause a situation which would lead unexplained hard
- lockups.
-
- Unless you are extending the TAU driver, or enjoy kernel/hardware
- debugging, leave this option off.
+ If in doubt, say N here.
config TAU_AVERAGE
bool "Average high and low temp"
--
2.25.1
From: Christophe Leroy <[email protected]>
[ Upstream commit 4c42dc5c69a8f24c467a6c997909d2f1d4efdc7f ]
Before the commit identified below, pages tables allocation was
performed after the allocation of final shadow area for linear memory.
But that commit switched the order, leading to page tables being
already allocated at the time 8xx kasan_init_shadow_8M() is called.
Due to this, kasan_init_shadow_8M() doesn't map the needed
shadow entries because there are already page tables.
kasan_init_shadow_8M() installs huge PMD entries instead of page
tables. We could at that time free the page tables, but there is no
point in creating page tables that get freed before being used.
Only book3s/32 hash needs early allocation of page tables. For other
variants, we can keep the initial order and create remaining page
tables after the allocation of final shadow memory for linear mem.
Move back the allocation of shadow page tables for
CONFIG_KASAN_VMALLOC into kasan_init() after the loop which creates
final shadow memory for linear mem.
Fixes: 41ea93cf7ba4 ("powerpc/kasan: Fix shadow pages allocation failure")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/8ae4554357da4882612644a74387ae05525b2aaa.1599800716.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/kasan/kasan_init_32.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c
index 019b0c0bbbf31..ca91d04d0a7ae 100644
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -121,8 +121,7 @@ void __init kasan_mmu_init(void)
{
int ret;
- if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE) ||
- IS_ENABLED(CONFIG_KASAN_VMALLOC)) {
+ if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE)) {
ret = kasan_init_shadow_page_tables(KASAN_SHADOW_START, KASAN_SHADOW_END);
if (ret)
@@ -133,11 +132,11 @@ void __init kasan_mmu_init(void)
void __init kasan_init(void)
{
struct memblock_region *reg;
+ int ret;
for_each_memblock(memory, reg) {
phys_addr_t base = reg->base;
phys_addr_t top = min(base + reg->size, total_lowmem);
- int ret;
if (base >= top)
continue;
@@ -147,6 +146,13 @@ void __init kasan_init(void)
panic("kasan: kasan_init_region() failed");
}
+ if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) {
+ ret = kasan_init_shadow_page_tables(KASAN_SHADOW_START, KASAN_SHADOW_END);
+
+ if (ret)
+ panic("kasan: kasan_init_shadow_page_tables() failed");
+ }
+
kasan_remap_early_shadow_ro();
clear_page(kasan_early_shadow_page);
--
2.25.1
From: Ravi Bangoria <[email protected]>
[ Upstream commit 4759c11ed20454b7b36db4ec15f7d5aa1519af4a ]
On p10 predecessors, watchpoint with quadword access is compared at
quadword length. If the watch range is doubleword or less than that
in a first half of quadword aligned 16 bytes, and if there is any
unaligned quadword access which will access only the 2nd half, the
handler should consider it as extraneous and emulate/single-step it
before continuing.
Fixes: 74c6881019b7 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Reported-by: Pedro Miraglia Franco de Carvalho <[email protected]>
Signed-off-by: Ravi Bangoria <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/hw_breakpoint.h | 1 +
arch/powerpc/kernel/hw_breakpoint.c | 12 ++++++++++--
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index cb424799da0dc..5a00da670a407 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -40,6 +40,7 @@ struct arch_hw_breakpoint {
#else
#define HW_BREAKPOINT_SIZE 0x8
#endif
+#define HW_BREAKPOINT_SIZE_QUADWORD 0x10
#define DABR_MAX_LEN 8
#define DAWR_MAX_LEN 512
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index c55e67bab2710..f39e86d751144 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -519,9 +519,17 @@ static bool ea_hw_range_overlaps(unsigned long ea, int size,
struct arch_hw_breakpoint *info)
{
unsigned long hw_start_addr, hw_end_addr;
+ unsigned long align_size = HW_BREAKPOINT_SIZE;
- hw_start_addr = ALIGN_DOWN(info->address, HW_BREAKPOINT_SIZE);
- hw_end_addr = ALIGN(info->address + info->len, HW_BREAKPOINT_SIZE);
+ /*
+ * On p10 predecessors, quadword is handle differently then
+ * other instructions.
+ */
+ if (!cpu_has_feature(CPU_FTR_ARCH_31) && size == 16)
+ align_size = HW_BREAKPOINT_SIZE_QUADWORD;
+
+ hw_start_addr = ALIGN_DOWN(info->address, align_size);
+ hw_end_addr = ALIGN(info->address + info->len, align_size);
return ((ea < hw_end_addr) && (ea + size > hw_start_addr));
}
--
2.25.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit a665eec0a22e11cdde708c1c256a465ebe768047 ]
Commit 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of
single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of
a process under certain conditions. One of the assumptions is that
mm_users would not be incremented via a reference outside the process
context with mmget_not_zero() then go on to kthread_use_mm() via that
reference.
That invariant was broken by io_uring code (see previous sparc64 fix),
but I'll point Fixes: to the original powerpc commit because we are
changing that assumption going forward, so this will make backports
match up.
Fix this by no longer relying on that assumption, but by having each CPU
check the mm is not being used, and clearing their own bit from the mask
only if it hasn't been switched-to by the time the IPI is processed.
This relies on commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB
invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm
switch sequences.
Fixes: 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Michael Ellerman <[email protected]>
Depends-on: 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/tlb.h | 13 -------------
arch/powerpc/mm/book3s64/radix_tlb.c | 23 ++++++++++++++++-------
2 files changed, 16 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index 862985cf51804..cf87bbdcfdcb2 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -67,19 +67,6 @@ static inline int mm_is_thread_local(struct mm_struct *mm)
return false;
return cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm));
}
-static inline void mm_reset_thread_local(struct mm_struct *mm)
-{
- WARN_ON(atomic_read(&mm->context.copros) > 0);
- /*
- * It's possible for mm_access to take a reference on mm_users to
- * access the remote mm from another thread, but it's not allowed
- * to set mm_cpumask, so mm_users may be > 1 here.
- */
- WARN_ON(current->mm != mm);
- atomic_set(&mm->context.active_cpus, 1);
- cpumask_clear(mm_cpumask(mm));
- cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
-}
#else /* CONFIG_PPC_BOOK3S_64 */
static inline int mm_is_thread_local(struct mm_struct *mm)
{
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index b5cc9b23cf024..277a07772e7d6 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -644,19 +644,29 @@ static void do_exit_flush_lazy_tlb(void *arg)
struct mm_struct *mm = arg;
unsigned long pid = mm->context.id;
+ /*
+ * A kthread could have done a mmget_not_zero() after the flushing CPU
+ * checked mm_is_singlethreaded, and be in the process of
+ * kthread_use_mm when interrupted here. In that case, current->mm will
+ * be set to mm, because kthread_use_mm() setting ->mm and switching to
+ * the mm is done with interrupts off.
+ */
if (current->mm == mm)
- return; /* Local CPU */
+ goto out_flush;
if (current->active_mm == mm) {
- /*
- * Must be a kernel thread because sender is single-threaded.
- */
- BUG_ON(current->mm);
+ WARN_ON_ONCE(current->mm != NULL);
+ /* Is a kernel thread and is using mm as the lazy tlb */
mmgrab(&init_mm);
- switch_mm(mm, &init_mm, current);
current->active_mm = &init_mm;
+ switch_mm_irqs_off(mm, &init_mm, current);
mmdrop(mm);
}
+
+ atomic_dec(&mm->context.active_cpus);
+ cpumask_clear_cpu(smp_processor_id(), mm_cpumask(mm));
+
+out_flush:
_tlbiel_pid(pid, RIC_FLUSH_ALL);
}
@@ -671,7 +681,6 @@ static void exit_flush_lazy_tlbs(struct mm_struct *mm)
*/
smp_call_function_many(mm_cpumask(mm), do_exit_flush_lazy_tlb,
(void *)mm, 1);
- mm_reset_thread_local(mm);
}
void radix__flush_tlb_mm(struct mm_struct *mm)
--
2.25.1
From: Finn Thain <[email protected]>
[ Upstream commit b1c6a0a10bfaf36ec82fde6f621da72407fa60a1 ]
Since commit 19dbdcb8039cf ("smp: Warn on function calls from softirq
context") the Thermal Assist Unit driver causes a warning like the
following when CONFIG_SMP is enabled.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/smp.c:428 smp_call_function_many_cond+0xf4/0x38c
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac #3
NIP: c00b37a8 LR: c00b3abc CTR: c001218c
REGS: c0799c60 TRAP: 0700 Not tainted (5.7.0-pmac)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000224 XER: 00000000
GPR00: c00b3abc c0799d18 c076e300 c079ef5c c0011fec 00000000 00000000 00000000
GPR08: 00000100 00000100 00008000 ffffffff 42000224 00000000 c079d040 c079d044
GPR16: 00000001 00000000 00000004 c0799da0 c079f054 c07a0000 c07a0000 00000000
GPR24: c0011fec 00000000 c079ef5c c079ef5c 00000000 00000000 00000000 00000000
NIP [c00b37a8] smp_call_function_many_cond+0xf4/0x38c
LR [c00b3abc] on_each_cpu+0x38/0x68
Call Trace:
[c0799d18] [ffffffff] 0xffffffff (unreliable)
[c0799d68] [c00b3abc] on_each_cpu+0x38/0x68
[c0799d88] [c0096704] call_timer_fn.isra.26+0x20/0x7c
[c0799d98] [c0096b40] run_timer_softirq+0x1d4/0x3fc
[c0799df8] [c05b4368] __do_softirq+0x118/0x240
[c0799e58] [c0039c44] irq_exit+0xc4/0xcc
[c0799e68] [c000ade8] timer_interrupt+0x1b0/0x230
[c0799ea8] [c0013520] ret_from_except+0x0/0x14
--- interrupt: 901 at arch_cpu_idle+0x24/0x6c
LR = arch_cpu_idle+0x24/0x6c
[c0799f70] [00000001] 0x1 (unreliable)
[c0799f80] [c0060990] do_idle+0xd8/0x17c
[c0799fa0] [c0060ba8] cpu_startup_entry+0x24/0x28
[c0799fb0] [c072d220] start_kernel+0x434/0x44c
[c0799ff0] [00003860] 0x3860
Instruction dump:
8129f204 2f890000 40beff98 3d20c07a 8929eec4 2f890000 40beff88 0fe00000
81220000 552805de 550802ef 4182ff84 <0fe00000> 3860ffff 7f65db78 7f44d378
---[ end trace 34a886e47819c2eb ]---
Don't call on_each_cpu() from a timer callback, call it from a worker
thread instead.
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/bb61650bea4f4c91fb8e24b9a6f130a1438651a7.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/tau_6xx.c | 38 +++++++++++++++++------------------
1 file changed, 18 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index 976d5bc1b5176..268205cc347da 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -13,13 +13,14 @@
*/
#include <linux/errno.h>
-#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
#include <asm/io.h>
#include <asm/reg.h>
@@ -39,8 +40,6 @@ static struct tau_temp
unsigned char grew;
} tau[NR_CPUS];
-struct timer_list tau_timer;
-
#undef DEBUG
/* TODO: put these in a /proc interface, with some sanity checks, and maybe
@@ -50,7 +49,7 @@ struct timer_list tau_timer;
#define step_size 2 /* step size when temp goes out of range */
#define window_expand 1 /* expand the window by this much */
/* configurable values for shrinking the window */
-#define shrink_timer 2*HZ /* period between shrinking the window */
+#define shrink_timer 2000 /* period between shrinking the window */
#define min_window 2 /* minimum window size, degrees C */
static void set_thresholds(unsigned long cpu)
@@ -187,14 +186,18 @@ static void tau_timeout(void * info)
local_irq_restore(flags);
}
-static void tau_timeout_smp(struct timer_list *unused)
-{
+static struct workqueue_struct *tau_workq;
- /* schedule ourselves to be run again */
- mod_timer(&tau_timer, jiffies + shrink_timer) ;
+static void tau_work_func(struct work_struct *work)
+{
+ msleep(shrink_timer);
on_each_cpu(tau_timeout, NULL, 0);
+ /* schedule ourselves to be run again */
+ queue_work(tau_workq, work);
}
+DECLARE_WORK(tau_work, tau_work_func);
+
/*
* setup the TAU
*
@@ -227,21 +230,16 @@ static int __init TAU_init(void)
return 1;
}
-
- /* first, set up the window shrinking timer */
- timer_setup(&tau_timer, tau_timeout_smp, 0);
- tau_timer.expires = jiffies + shrink_timer;
- add_timer(&tau_timer);
+ tau_workq = alloc_workqueue("tau", WQ_UNBOUND, 1, 0);
+ if (!tau_workq)
+ return -ENOMEM;
on_each_cpu(TAU_init_smp, NULL, 0);
- printk("Thermal assist unit ");
-#ifdef CONFIG_TAU_INT
- printk("using interrupts, ");
-#else
- printk("using timers, ");
-#endif
- printk("shrink_timer: %d jiffies\n", shrink_timer);
+ queue_work(tau_workq, &tau_work);
+
+ pr_info("Thermal assist unit using %s, shrink_timer: %d ms\n",
+ IS_ENABLED(CONFIG_TAU_INT) ? "interrupts" : "workqueue", shrink_timer);
tau_initialized = 1;
return 0;
--
2.25.1
From: Ravi Bangoria <[email protected]>
[ Upstream commit 4441eb02333a9b46a0d919aa7a6d3b137b5f2562 ]
Vector load/store instructions are special because they are always
aligned. Thus unaligned EA needs to be aligned down before comparing
it with watch ranges. Otherwise we might consider valid event as
invalid.
Fixes: 74c6881019b7 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Signed-off-by: Ravi Bangoria <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/hw_breakpoint.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index f39e86d751144..2190be70c7fd9 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -643,6 +643,8 @@ static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
if (*type == CACHEOP) {
*size = cache_op_size();
*ea &= ~(*size - 1);
+ } else if (*type == LOAD_VMX || *type == STORE_VMX) {
+ *ea &= ~(*size - 1);
}
}
--
2.25.1
From: Aneesh Kumar K.V <[email protected]>
[ Upstream commit 7746406baa3bc9e23fdd7b7da2f04d86e25ab837 ]
With commit: 0034d395f89d ("powerpc/mm/hash64: Map all the kernel
regions in the same 0xc range"), we now split the 64TB address range
into 4 contexts each of 16TB. That implies we can do only 16TB linear
mapping.
On some systems, eg. Power9, memory attached to nodes > 0 will appear
above 16TB in the linear mapping. This resulted in kernel crash when
we boot such systems in hash translation mode with 4K PAGE_SIZE.
This patch updates the kernel mapping such that we now start supporting upto
61TB of memory with 4K. The kernel mapping now looks like below 4K PAGE_SIZE
and hash translation.
vmalloc start = 0xc0003d0000000000
IO start = 0xc0003e0000000000
vmemmap start = 0xc0003f0000000000
Our MAX_PHYSMEM_BITS for 4K is still 64TB even though we can only map 61TB.
We prevent bolt mapping anything outside 61TB range by checking against
H_VMALLOC_START.
Fixes: 0034d395f89d ("powerpc/mm/hash64: Map all the kernel regions in the same 0xc range")
Reported-by: Cameron Berkenpas <[email protected]>
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/book3s/64/hash-4k.h | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
index 3f9ae3585ab98..80c9534148821 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -13,20 +13,19 @@
*/
#define MAX_EA_BITS_PER_CONTEXT 46
-#define REGION_SHIFT (MAX_EA_BITS_PER_CONTEXT - 2)
/*
- * Our page table limit us to 64TB. Hence for the kernel mapping,
- * each MAP area is limited to 16 TB.
- * The four map areas are: linear mapping, vmap, IO and vmemmap
+ * Our page table limit us to 64TB. For 64TB physical memory, we only need 64GB
+ * of vmemmap space. To better support sparse memory layout, we use 61TB
+ * linear map range, 1TB of vmalloc, 1TB of I/O and 1TB of vmememmap.
*/
+#define REGION_SHIFT (40)
#define H_KERN_MAP_SIZE (ASM_CONST(1) << REGION_SHIFT)
/*
- * Define the address range of the kernel non-linear virtual area
- * 16TB
+ * Define the address range of the kernel non-linear virtual area (61TB)
*/
-#define H_KERN_VIRT_START ASM_CONST(0xc000100000000000)
+#define H_KERN_VIRT_START ASM_CONST(0xc0003d0000000000)
#ifndef __ASSEMBLY__
#define H_PTE_TABLE_SIZE (sizeof(pte_t) << H_PTE_INDEX_SIZE)
--
2.25.1
From: Tom Rix <[email protected]>
[ Upstream commit 53708f4fd9cfe389beab5c8daa763bcd0e0b4aef ]
clang static analysis reports this problem:
sdio.c:2403:3: warning: Attempt to free released memory
kfree(card->mpa_rx.buf);
^~~~~~~~~~~~~~~~~~~~~~~
When mwifiex_init_sdio() fails in its first call to
mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it
again. If the second alloc of mpa_tx.buf fails, the error
handler will try to free the old, previously freed mpa_rx.buf.
Reviewing the code, it looks like a second double free would
happen with mwifiex_cleanup_sdio().
So set both pointers to NULL when they are freed.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Tom Rix <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/sdio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index a042965962a2d..1b6bee5465288 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -1976,6 +1976,8 @@ static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter,
kfree(card->mpa_rx.buf);
card->mpa_tx.buf_size = 0;
card->mpa_rx.buf_size = 0;
+ card->mpa_tx.buf = NULL;
+ card->mpa_rx.buf = NULL;
}
return ret;
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 7e85bcda8bfe883f4244672ed79f81b7762a1a7e ]
These are the same thing, except that cma_ndev_work doesn't have a state
transition. Signal no state transition by setting old_state and new_state
== 0.
In all cases the handler function should not be called once
rdma_destroy_id() has progressed passed setting the state.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cma.c | 38 +++++++----------------------------
1 file changed, 7 insertions(+), 31 deletions(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 26de0dab60bbb..015b2fe509dca 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -363,12 +363,6 @@ struct cma_work {
struct rdma_cm_event event;
};
-struct cma_ndev_work {
- struct work_struct work;
- struct rdma_id_private *id;
- struct rdma_cm_event event;
-};
-
struct iboe_mcast_work {
struct work_struct work;
struct rdma_id_private *id;
@@ -2646,32 +2640,14 @@ static void cma_work_handler(struct work_struct *_work)
struct rdma_id_private *id_priv = work->id;
mutex_lock(&id_priv->handler_mutex);
- if (!cma_comp_exch(id_priv, work->old_state, work->new_state))
+ if (READ_ONCE(id_priv->state) == RDMA_CM_DESTROYING ||
+ READ_ONCE(id_priv->state) == RDMA_CM_DEVICE_REMOVAL)
goto out_unlock;
-
- if (cma_cm_event_handler(id_priv, &work->event)) {
- cma_id_put(id_priv);
- destroy_id_handler_unlock(id_priv);
- goto out_free;
+ if (work->old_state != 0 || work->new_state != 0) {
+ if (!cma_comp_exch(id_priv, work->old_state, work->new_state))
+ goto out_unlock;
}
-out_unlock:
- mutex_unlock(&id_priv->handler_mutex);
- cma_id_put(id_priv);
-out_free:
- kfree(work);
-}
-
-static void cma_ndev_work_handler(struct work_struct *_work)
-{
- struct cma_ndev_work *work = container_of(_work, struct cma_ndev_work, work);
- struct rdma_id_private *id_priv = work->id;
-
- mutex_lock(&id_priv->handler_mutex);
- if (id_priv->state == RDMA_CM_DESTROYING ||
- id_priv->state == RDMA_CM_DEVICE_REMOVAL)
- goto out_unlock;
-
if (cma_cm_event_handler(id_priv, &work->event)) {
cma_id_put(id_priv);
destroy_id_handler_unlock(id_priv);
@@ -4652,7 +4628,7 @@ EXPORT_SYMBOL(rdma_leave_multicast);
static int cma_netdev_change(struct net_device *ndev, struct rdma_id_private *id_priv)
{
struct rdma_dev_addr *dev_addr;
- struct cma_ndev_work *work;
+ struct cma_work *work;
dev_addr = &id_priv->id.route.addr.dev_addr;
@@ -4665,7 +4641,7 @@ static int cma_netdev_change(struct net_device *ndev, struct rdma_id_private *id
if (!work)
return -ENOMEM;
- INIT_WORK(&work->work, cma_ndev_work_handler);
+ INIT_WORK(&work->work, cma_work_handler);
work->id = id_priv;
work->event.event = RDMA_CM_EVENT_ADDR_CHANGE;
cma_id_get(id_priv);
--
2.25.1
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 0d9826bc18ce356e8909919ad681ad65d0a6061e ]
Dump vlan tag and proto for the usual vlan offload case if the
NF_LOG_MACDECODE flag is set on. Without this information the logging is
misleading as there is no reference to the VLAN header.
[12716.993704] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0800 SRC=192.168.10.2 DST=172.217.168.163 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2548 DF PROTO=TCP SPT=55848 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0
[12721.157643] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0806 ARP HTYPE=1 PTYPE=0x0800 OPCODE=2 MACSRC=86:6c:92:ea:d6:73 IPSRC=192.168.10.2 MACDST=0e:3b:eb:86:73:76 IPDST=192.168.10.1
Fixes: 83e96d443b37 ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/netfilter/nf_log.h | 1 +
net/ipv4/netfilter/nf_log_arp.c | 19 +++++++++++++++++--
net/ipv4/netfilter/nf_log_ipv4.c | 6 ++++--
net/ipv6/netfilter/nf_log_ipv6.c | 8 +++++---
net/netfilter/nf_log_common.c | 12 ++++++++++++
5 files changed, 39 insertions(+), 7 deletions(-)
diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h
index 0d3920896d502..716db4a0fed89 100644
--- a/include/net/netfilter/nf_log.h
+++ b/include/net/netfilter/nf_log.h
@@ -108,6 +108,7 @@ int nf_log_dump_tcp_header(struct nf_log_buf *m, const struct sk_buff *skb,
unsigned int logflags);
void nf_log_dump_sk_uid_gid(struct net *net, struct nf_log_buf *m,
struct sock *sk);
+void nf_log_dump_vlan(struct nf_log_buf *m, const struct sk_buff *skb);
void nf_log_dump_packet_common(struct nf_log_buf *m, u_int8_t pf,
unsigned int hooknum, const struct sk_buff *skb,
const struct net_device *in,
diff --git a/net/ipv4/netfilter/nf_log_arp.c b/net/ipv4/netfilter/nf_log_arp.c
index 7a83f881efa9e..136030ad2e546 100644
--- a/net/ipv4/netfilter/nf_log_arp.c
+++ b/net/ipv4/netfilter/nf_log_arp.c
@@ -43,16 +43,31 @@ static void dump_arp_packet(struct nf_log_buf *m,
const struct nf_loginfo *info,
const struct sk_buff *skb, unsigned int nhoff)
{
- const struct arphdr *ah;
- struct arphdr _arph;
const struct arppayload *ap;
struct arppayload _arpp;
+ const struct arphdr *ah;
+ unsigned int logflags;
+ struct arphdr _arph;
ah = skb_header_pointer(skb, 0, sizeof(_arph), &_arph);
if (ah == NULL) {
nf_log_buf_add(m, "TRUNCATED");
return;
}
+
+ if (info->type == NF_LOG_TYPE_LOG)
+ logflags = info->u.log.logflags;
+ else
+ logflags = NF_LOG_DEFAULT_MASK;
+
+ if (logflags & NF_LOG_MACDECODE) {
+ nf_log_buf_add(m, "MACSRC=%pM MACDST=%pM ",
+ eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest);
+ nf_log_dump_vlan(m, skb);
+ nf_log_buf_add(m, "MACPROTO=%04x ",
+ ntohs(eth_hdr(skb)->h_proto));
+ }
+
nf_log_buf_add(m, "ARP HTYPE=%d PTYPE=0x%04x OPCODE=%d",
ntohs(ah->ar_hrd), ntohs(ah->ar_pro), ntohs(ah->ar_op));
diff --git a/net/ipv4/netfilter/nf_log_ipv4.c b/net/ipv4/netfilter/nf_log_ipv4.c
index 0c72156130b68..d07583fac8f8c 100644
--- a/net/ipv4/netfilter/nf_log_ipv4.c
+++ b/net/ipv4/netfilter/nf_log_ipv4.c
@@ -284,8 +284,10 @@ static void dump_ipv4_mac_header(struct nf_log_buf *m,
switch (dev->type) {
case ARPHRD_ETHER:
- nf_log_buf_add(m, "MACSRC=%pM MACDST=%pM MACPROTO=%04x ",
- eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
+ nf_log_buf_add(m, "MACSRC=%pM MACDST=%pM ",
+ eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest);
+ nf_log_dump_vlan(m, skb);
+ nf_log_buf_add(m, "MACPROTO=%04x ",
ntohs(eth_hdr(skb)->h_proto));
return;
default:
diff --git a/net/ipv6/netfilter/nf_log_ipv6.c b/net/ipv6/netfilter/nf_log_ipv6.c
index da64550a57075..8210ff34ed9b7 100644
--- a/net/ipv6/netfilter/nf_log_ipv6.c
+++ b/net/ipv6/netfilter/nf_log_ipv6.c
@@ -297,9 +297,11 @@ static void dump_ipv6_mac_header(struct nf_log_buf *m,
switch (dev->type) {
case ARPHRD_ETHER:
- nf_log_buf_add(m, "MACSRC=%pM MACDST=%pM MACPROTO=%04x ",
- eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
- ntohs(eth_hdr(skb)->h_proto));
+ nf_log_buf_add(m, "MACSRC=%pM MACDST=%pM ",
+ eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest);
+ nf_log_dump_vlan(m, skb);
+ nf_log_buf_add(m, "MACPROTO=%04x ",
+ ntohs(eth_hdr(skb)->h_proto));
return;
default:
break;
diff --git a/net/netfilter/nf_log_common.c b/net/netfilter/nf_log_common.c
index ae5628ddbe6d7..fd7c5f0f5c25b 100644
--- a/net/netfilter/nf_log_common.c
+++ b/net/netfilter/nf_log_common.c
@@ -171,6 +171,18 @@ nf_log_dump_packet_common(struct nf_log_buf *m, u_int8_t pf,
}
EXPORT_SYMBOL_GPL(nf_log_dump_packet_common);
+void nf_log_dump_vlan(struct nf_log_buf *m, const struct sk_buff *skb)
+{
+ u16 vid;
+
+ if (!skb_vlan_tag_present(skb))
+ return;
+
+ vid = skb_vlan_tag_get(skb);
+ nf_log_buf_add(m, "VPROTO=%04x VID=%u ", ntohs(skb->vlan_proto), vid);
+}
+EXPORT_SYMBOL_GPL(nf_log_dump_vlan);
+
/* bridge and netdev logging families share this code. */
void nf_log_l2packet(struct net *net, u_int8_t pf,
__be16 protocol,
--
2.25.1
From: Darrick J. Wong <[email protected]>
[ Upstream commit 8ffa90e1145c70c7ac47f14b59583b2296d89e72 ]
Refactor xfs_getfsmap to improve its performance: instead of indirectly
calling a function that copies one record to userspace at a time, create
a shadow buffer in the kernel and copy the whole array once at the end.
On the author's computer, this reduces the runtime on his /home by ~20%.
This also eliminates a deadlock when running GETFSMAP against the
realtime device. The current code locks the rtbitmap to create
fsmappings and copies them into userspace, having not released the
rtbitmap lock. If the userspace buffer is an mmap of a sparse file that
itself resides on the realtime device, the write page fault will recurse
into the fs for allocation, which will deadlock on the rtbitmap lock.
Fixes: 4c934c7dd60c ("xfs: report realtime space information via the rtbitmap")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/xfs/xfs_fsmap.c | 45 +++++++-------
fs/xfs/xfs_fsmap.h | 6 +-
fs/xfs/xfs_ioctl.c | 144 ++++++++++++++++++++++++++++++---------------
3 files changed, 124 insertions(+), 71 deletions(-)
diff --git a/fs/xfs/xfs_fsmap.c b/fs/xfs/xfs_fsmap.c
index aa36e7daf82c4..9ce5e7d5bf8f2 100644
--- a/fs/xfs/xfs_fsmap.c
+++ b/fs/xfs/xfs_fsmap.c
@@ -26,7 +26,7 @@
#include "xfs_rtalloc.h"
/* Convert an xfs_fsmap to an fsmap. */
-void
+static void
xfs_fsmap_from_internal(
struct fsmap *dest,
struct xfs_fsmap *src)
@@ -155,8 +155,7 @@ xfs_fsmap_owner_from_rmap(
/* getfsmap query state */
struct xfs_getfsmap_info {
struct xfs_fsmap_head *head;
- xfs_fsmap_format_t formatter; /* formatting fn */
- void *format_arg; /* format buffer */
+ struct fsmap *fsmap_recs; /* mapping records */
struct xfs_buf *agf_bp; /* AGF, for refcount queries */
xfs_daddr_t next_daddr; /* next daddr we expect */
u64 missing_owner; /* owner of holes */
@@ -224,6 +223,20 @@ xfs_getfsmap_is_shared(
return 0;
}
+static inline void
+xfs_getfsmap_format(
+ struct xfs_mount *mp,
+ struct xfs_fsmap *xfm,
+ struct xfs_getfsmap_info *info)
+{
+ struct fsmap *rec;
+
+ trace_xfs_getfsmap_mapping(mp, xfm);
+
+ rec = &info->fsmap_recs[info->head->fmh_entries++];
+ xfs_fsmap_from_internal(rec, xfm);
+}
+
/*
* Format a reverse mapping for getfsmap, having translated rm_startblock
* into the appropriate daddr units.
@@ -288,10 +301,7 @@ xfs_getfsmap_helper(
fmr.fmr_offset = 0;
fmr.fmr_length = rec_daddr - info->next_daddr;
fmr.fmr_flags = FMR_OF_SPECIAL_OWNER;
- error = info->formatter(&fmr, info->format_arg);
- if (error)
- return error;
- info->head->fmh_entries++;
+ xfs_getfsmap_format(mp, &fmr, info);
}
if (info->last)
@@ -323,11 +333,8 @@ xfs_getfsmap_helper(
if (shared)
fmr.fmr_flags |= FMR_OF_SHARED;
}
- error = info->formatter(&fmr, info->format_arg);
- if (error)
- return error;
- info->head->fmh_entries++;
+ xfs_getfsmap_format(mp, &fmr, info);
out:
rec_daddr += XFS_FSB_TO_BB(mp, rec->rm_blockcount);
if (info->next_daddr < rec_daddr)
@@ -795,11 +802,11 @@ xfs_getfsmap_check_keys(
#endif /* CONFIG_XFS_RT */
/*
- * Get filesystem's extents as described in head, and format for
- * output. Calls formatter to fill the user's buffer until all
- * extents are mapped, until the passed-in head->fmh_count slots have
- * been filled, or until the formatter short-circuits the loop, if it
- * is tracking filled-in extents on its own.
+ * Get filesystem's extents as described in head, and format for output. Fills
+ * in the supplied records array until there are no more reverse mappings to
+ * return or head.fmh_entries == head.fmh_count. In the second case, this
+ * function returns -ECANCELED to indicate that more records would have been
+ * returned.
*
* Key to Confusion
* ----------------
@@ -819,8 +826,7 @@ int
xfs_getfsmap(
struct xfs_mount *mp,
struct xfs_fsmap_head *head,
- xfs_fsmap_format_t formatter,
- void *arg)
+ struct fsmap *fsmap_recs)
{
struct xfs_trans *tp = NULL;
struct xfs_fsmap dkeys[2]; /* per-dev keys */
@@ -895,8 +901,7 @@ xfs_getfsmap(
info.next_daddr = head->fmh_keys[0].fmr_physical +
head->fmh_keys[0].fmr_length;
- info.formatter = formatter;
- info.format_arg = arg;
+ info.fsmap_recs = fsmap_recs;
info.head = head;
/*
diff --git a/fs/xfs/xfs_fsmap.h b/fs/xfs/xfs_fsmap.h
index c6c57739b8626..a0775788e7b13 100644
--- a/fs/xfs/xfs_fsmap.h
+++ b/fs/xfs/xfs_fsmap.h
@@ -27,13 +27,9 @@ struct xfs_fsmap_head {
struct xfs_fsmap fmh_keys[2]; /* low and high keys */
};
-void xfs_fsmap_from_internal(struct fsmap *dest, struct xfs_fsmap *src);
void xfs_fsmap_to_internal(struct xfs_fsmap *dest, struct fsmap *src);
-/* fsmap to userspace formatter - copy to user & advance pointer */
-typedef int (*xfs_fsmap_format_t)(struct xfs_fsmap *, void *);
-
int xfs_getfsmap(struct xfs_mount *mp, struct xfs_fsmap_head *head,
- xfs_fsmap_format_t formatter, void *arg);
+ struct fsmap *out_recs);
#endif /* __XFS_FSMAP_H__ */
diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
index a190212ca85d0..e2a8edcb367bb 100644
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -1707,39 +1707,17 @@ xfs_ioc_getbmap(
return error;
}
-struct getfsmap_info {
- struct xfs_mount *mp;
- struct fsmap_head __user *data;
- unsigned int idx;
- __u32 last_flags;
-};
-
-STATIC int
-xfs_getfsmap_format(struct xfs_fsmap *xfm, void *priv)
-{
- struct getfsmap_info *info = priv;
- struct fsmap fm;
-
- trace_xfs_getfsmap_mapping(info->mp, xfm);
-
- info->last_flags = xfm->fmr_flags;
- xfs_fsmap_from_internal(&fm, xfm);
- if (copy_to_user(&info->data->fmh_recs[info->idx++], &fm,
- sizeof(struct fsmap)))
- return -EFAULT;
-
- return 0;
-}
-
STATIC int
xfs_ioc_getfsmap(
struct xfs_inode *ip,
struct fsmap_head __user *arg)
{
- struct getfsmap_info info = { NULL };
struct xfs_fsmap_head xhead = {0};
struct fsmap_head head;
- bool aborted = false;
+ struct fsmap *recs;
+ unsigned int count;
+ __u32 last_flags = 0;
+ bool done = false;
int error;
if (copy_from_user(&head, arg, sizeof(struct fsmap_head)))
@@ -1751,38 +1729,112 @@ xfs_ioc_getfsmap(
sizeof(head.fmh_keys[1].fmr_reserved)))
return -EINVAL;
+ /*
+ * Use an internal memory buffer so that we don't have to copy fsmap
+ * data to userspace while holding locks. Start by trying to allocate
+ * up to 128k for the buffer, but fall back to a single page if needed.
+ */
+ count = min_t(unsigned int, head.fmh_count,
+ 131072 / sizeof(struct fsmap));
+ recs = kvzalloc(count * sizeof(struct fsmap), GFP_KERNEL);
+ if (!recs) {
+ count = min_t(unsigned int, head.fmh_count,
+ PAGE_SIZE / sizeof(struct fsmap));
+ recs = kvzalloc(count * sizeof(struct fsmap), GFP_KERNEL);
+ if (!recs)
+ return -ENOMEM;
+ }
+
xhead.fmh_iflags = head.fmh_iflags;
- xhead.fmh_count = head.fmh_count;
xfs_fsmap_to_internal(&xhead.fmh_keys[0], &head.fmh_keys[0]);
xfs_fsmap_to_internal(&xhead.fmh_keys[1], &head.fmh_keys[1]);
trace_xfs_getfsmap_low_key(ip->i_mount, &xhead.fmh_keys[0]);
trace_xfs_getfsmap_high_key(ip->i_mount, &xhead.fmh_keys[1]);
- info.mp = ip->i_mount;
- info.data = arg;
- error = xfs_getfsmap(ip->i_mount, &xhead, xfs_getfsmap_format, &info);
- if (error == -ECANCELED) {
- error = 0;
- aborted = true;
- } else if (error)
- return error;
+ head.fmh_entries = 0;
+ do {
+ struct fsmap __user *user_recs;
+ struct fsmap *last_rec;
+
+ user_recs = &arg->fmh_recs[head.fmh_entries];
+ xhead.fmh_entries = 0;
+ xhead.fmh_count = min_t(unsigned int, count,
+ head.fmh_count - head.fmh_entries);
+
+ /* Run query, record how many entries we got. */
+ error = xfs_getfsmap(ip->i_mount, &xhead, recs);
+ switch (error) {
+ case 0:
+ /*
+ * There are no more records in the result set. Copy
+ * whatever we got to userspace and break out.
+ */
+ done = true;
+ break;
+ case -ECANCELED:
+ /*
+ * The internal memory buffer is full. Copy whatever
+ * records we got to userspace and go again if we have
+ * not yet filled the userspace buffer.
+ */
+ error = 0;
+ break;
+ default:
+ goto out_free;
+ }
+ head.fmh_entries += xhead.fmh_entries;
+ head.fmh_oflags = xhead.fmh_oflags;
- /* If we didn't abort, set the "last" flag in the last fmx */
- if (!aborted && info.idx) {
- info.last_flags |= FMR_OF_LAST;
- if (copy_to_user(&info.data->fmh_recs[info.idx - 1].fmr_flags,
- &info.last_flags, sizeof(info.last_flags)))
- return -EFAULT;
+ /*
+ * If the caller wanted a record count or there aren't any
+ * new records to return, we're done.
+ */
+ if (head.fmh_count == 0 || xhead.fmh_entries == 0)
+ break;
+
+ /* Copy all the records we got out to userspace. */
+ if (copy_to_user(user_recs, recs,
+ xhead.fmh_entries * sizeof(struct fsmap))) {
+ error = -EFAULT;
+ goto out_free;
+ }
+
+ /* Remember the last record flags we copied to userspace. */
+ last_rec = &recs[xhead.fmh_entries - 1];
+ last_flags = last_rec->fmr_flags;
+
+ /* Set up the low key for the next iteration. */
+ xfs_fsmap_to_internal(&xhead.fmh_keys[0], last_rec);
+ trace_xfs_getfsmap_low_key(ip->i_mount, &xhead.fmh_keys[0]);
+ } while (!done && head.fmh_entries < head.fmh_count);
+
+ /*
+ * If there are no more records in the query result set and we're not
+ * in counting mode, mark the last record returned with the LAST flag.
+ */
+ if (done && head.fmh_count > 0 && head.fmh_entries > 0) {
+ struct fsmap __user *user_rec;
+
+ last_flags |= FMR_OF_LAST;
+ user_rec = &arg->fmh_recs[head.fmh_entries - 1];
+
+ if (copy_to_user(&user_rec->fmr_flags, &last_flags,
+ sizeof(last_flags))) {
+ error = -EFAULT;
+ goto out_free;
+ }
}
/* copy back header */
- head.fmh_entries = xhead.fmh_entries;
- head.fmh_oflags = xhead.fmh_oflags;
- if (copy_to_user(arg, &head, sizeof(struct fsmap_head)))
- return -EFAULT;
+ if (copy_to_user(arg, &head, sizeof(struct fsmap_head))) {
+ error = -EFAULT;
+ goto out_free;
+ }
- return 0;
+out_free:
+ kmem_free(recs);
+ return error;
}
STATIC int
--
2.25.1
From: Guillaume Tucker <[email protected]>
[ Upstream commit 8e007b367a59bcdf484c81f6df9bd5a4cc179ca6 ]
The L310_PREFETCH_CTRL register bits 28 and 29 to enable data and
instruction prefetch respectively can also be accessed via the
L2X0_AUX_CTRL register. They appear to be actually wired together in
hardware between the registers. Changing them in the prefetch
register only will get undone when restoring the aux control register
later on. For this reason, set these bits in both registers during
initialisation according to the devicetree property values.
Link: https://lore.kernel.org/lkml/76f2f3ad5e77e356e0a5b99ceee1e774a2842c25.1597061474.git.guillaume.tucker@collabora.com/
Fixes: ec3bd0e68a67 ("ARM: 8391/1: l2c: add options to overwrite prefetching behavior")
Signed-off-by: Guillaume Tucker <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mm/cache-l2x0.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 12c26eb88afbc..43d91bfd23600 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -1249,20 +1249,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
ret = of_property_read_u32(np, "prefetch-data", &val);
if (ret == 0) {
- if (val)
+ if (val) {
prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
- else
+ *aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+ } else {
prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+ *aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+ }
+ *aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
} else if (ret != -EINVAL) {
pr_err("L2C-310 OF prefetch-data property value is missing\n");
}
ret = of_property_read_u32(np, "prefetch-instr", &val);
if (ret == 0) {
- if (val)
+ if (val) {
prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
- else
+ *aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+ } else {
prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+ *aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+ }
+ *aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
} else if (ret != -EINVAL) {
pr_err("L2C-310 OF prefetch-instr property value is missing\n");
}
--
2.25.1
From: Miaohe Lin <[email protected]>
[ Upstream commit 822bca52ee7eb279acfba261a423ed7ac47d6f73 ]
If we failed to drain inode, we would forget to free the swap address
space allocated by init_swap_address_space() above.
Fixes: dc617f29dbe5 ("vfs: don't allow writes to swap files")
Signed-off-by: Miaohe Lin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/swapfile.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 26707c5dc9fce..605294e4df684 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -3336,7 +3336,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
error = inode_drain_writes(inode);
if (error) {
inode->i_flags &= ~S_SWAPFILE;
- goto bad_swap_unlock_inode;
+ goto free_swap_address_space;
}
mutex_lock(&swapon_mutex);
@@ -3361,6 +3361,8 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
error = 0;
goto out;
+free_swap_address_space:
+ exit_swap_address_space(p->type);
bad_swap_unlock_inode:
inode_unlock(inode);
bad_swap:
--
2.25.1
From: John Fastabend <[email protected]>
[ Upstream commit 10d58d006356a075a7b056e0f6502db416d1a261 ]
Calling skb_orphan() is unnecessary in the strp rcv handler because the skb
is from a skb_clone() in __strp_recv. So it never has a destructor or a
sk assigned. Plus its confusing to read because it might hint to the reader
that the skb could have an sk assigned which is not true. Even if we did
have an sk assigned it would be cleaner to simply wait for the upcoming
kfree_skb().
Additionally, move the comment about strparser clone up so its closer to
the logic it is describing and add to it so that it is more complete.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/160226865548.5692.9098315689984599579.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/skmsg.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index 6a32a1fd34f8c..053472c48354b 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -662,15 +662,16 @@ static int sk_psock_bpf_run(struct sk_psock *psock, struct bpf_prog *prog,
{
int ret;
+ /* strparser clones the skb before handing it to a upper layer,
+ * meaning we have the same data, but sk is NULL. We do want an
+ * sk pointer though when we run the BPF program. So we set it
+ * here and then NULL it to ensure we don't trigger a BUG_ON()
+ * in skb/sk operations later if kfree_skb is called with a
+ * valid skb->sk pointer and no destructor assigned.
+ */
skb->sk = psock->sk;
bpf_compute_data_end_sk_skb(skb);
ret = bpf_prog_run_pin_on_cpu(prog, skb);
- /* strparser clones the skb before handing it to a upper layer,
- * meaning skb_orphan has been called. We NULL sk on the way out
- * to ensure we don't trigger a BUG_ON() in skb/sk operations
- * later and because we are not charging the memory of this skb
- * to any socket yet.
- */
skb->sk = NULL;
return ret;
}
@@ -795,7 +796,6 @@ static void sk_psock_strp_read(struct strparser *strp, struct sk_buff *skb)
}
prog = READ_ONCE(psock->progs.skb_verdict);
if (likely(prog)) {
- skb_orphan(skb);
tcp_skb_bpf_redirect_clear(skb);
ret = sk_psock_bpf_run(psock, prog, skb);
ret = sk_psock_map_verd(ret, tcp_skb_bpf_redirect_fetch(skb));
--
2.25.1
From: Dave Chinner <[email protected]>
[ Upstream commit 671459676ab0e1d371c8d6b184ad1faa05b6941e ]
Nathan popped up on #xfs and pointed out that we fail to handle
finobt btree blocks in xlog_recover_get_buf_lsn(). This means they
always fall through the entire magic number matching code to "recover
immediately". Whilst most of the time this is the correct behaviour,
occasionally it will be incorrect and could potentially overwrite
more recent metadata because we don't check the LSN in the on disk
metadata at all.
This bug has been present since the finobt was first introduced, and
is a potential cause of the occasional xfs_iget_check_free_state()
failures we see that indicate that the inode btree state does not
match the on disk inode state.
Fixes: aafc3c246529 ("xfs: support the XFS_BTNUM_FINOBT free inode btree type")
Reported-by: Nathan Scott <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/xfs/xfs_buf_item_recover.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/xfs/xfs_buf_item_recover.c b/fs/xfs/xfs_buf_item_recover.c
index 04faa7310c4f0..8140bd870226a 100644
--- a/fs/xfs/xfs_buf_item_recover.c
+++ b/fs/xfs/xfs_buf_item_recover.c
@@ -721,6 +721,8 @@ xlog_recover_get_buf_lsn(
case XFS_ABTC_MAGIC:
case XFS_RMAP_CRC_MAGIC:
case XFS_REFC_CRC_MAGIC:
+ case XFS_FIBT_CRC_MAGIC:
+ case XFS_FIBT_MAGIC:
case XFS_IBT_CRC_MAGIC:
case XFS_IBT_MAGIC: {
struct xfs_btree_block *btb = blk;
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 3788d2997bc0150ea911a964d5b5a2e11808a936 ]
Two places were open coding this sequence, and also pull in
cma_leave_roce_mc_group() which was called only once.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cma.c | 63 +++++++++++++++++------------------
1 file changed, 31 insertions(+), 32 deletions(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 0c3c7b85c65df..32cb654fe4b8c 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1777,19 +1777,30 @@ static void cma_release_port(struct rdma_id_private *id_priv)
mutex_unlock(&lock);
}
-static void cma_leave_roce_mc_group(struct rdma_id_private *id_priv,
- struct cma_multicast *mc)
+static void destroy_mc(struct rdma_id_private *id_priv,
+ struct cma_multicast *mc)
{
- struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr;
- struct net_device *ndev = NULL;
+ if (rdma_cap_ib_mcast(id_priv->id.device, id_priv->id.port_num)) {
+ ib_sa_free_multicast(mc->multicast.ib);
+ kfree(mc);
+ return;
+ }
- if (dev_addr->bound_dev_if)
- ndev = dev_get_by_index(dev_addr->net, dev_addr->bound_dev_if);
- if (ndev) {
- cma_igmp_send(ndev, &mc->multicast.ib->rec.mgid, false);
- dev_put(ndev);
+ if (rdma_protocol_roce(id_priv->id.device,
+ id_priv->id.port_num)) {
+ struct rdma_dev_addr *dev_addr =
+ &id_priv->id.route.addr.dev_addr;
+ struct net_device *ndev = NULL;
+
+ if (dev_addr->bound_dev_if)
+ ndev = dev_get_by_index(dev_addr->net,
+ dev_addr->bound_dev_if);
+ if (ndev) {
+ cma_igmp_send(ndev, &mc->multicast.ib->rec.mgid, false);
+ dev_put(ndev);
+ }
+ kref_put(&mc->mcref, release_mc);
}
- kref_put(&mc->mcref, release_mc);
}
static void cma_leave_mc_groups(struct rdma_id_private *id_priv)
@@ -1797,16 +1808,10 @@ static void cma_leave_mc_groups(struct rdma_id_private *id_priv)
struct cma_multicast *mc;
while (!list_empty(&id_priv->mc_list)) {
- mc = container_of(id_priv->mc_list.next,
- struct cma_multicast, list);
+ mc = list_first_entry(&id_priv->mc_list, struct cma_multicast,
+ list);
list_del(&mc->list);
- if (rdma_cap_ib_mcast(id_priv->cma_dev->device,
- id_priv->id.port_num)) {
- ib_sa_free_multicast(mc->multicast.ib);
- kfree(mc);
- } else {
- cma_leave_roce_mc_group(id_priv, mc);
- }
+ destroy_mc(id_priv, mc);
}
}
@@ -4595,20 +4600,14 @@ void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr)
id_priv = container_of(id, struct rdma_id_private, id);
spin_lock_irq(&id_priv->lock);
list_for_each_entry(mc, &id_priv->mc_list, list) {
- if (!memcmp(&mc->addr, addr, rdma_addr_size(addr))) {
- list_del(&mc->list);
- spin_unlock_irq(&id_priv->lock);
-
- BUG_ON(id_priv->cma_dev->device != id->device);
+ if (memcmp(&mc->addr, addr, rdma_addr_size(addr)) != 0)
+ continue;
+ list_del(&mc->list);
+ spin_unlock_irq(&id_priv->lock);
- if (rdma_cap_ib_mcast(id->device, id->port_num)) {
- ib_sa_free_multicast(mc->multicast.ib);
- kfree(mc);
- } else if (rdma_protocol_roce(id->device, id->port_num)) {
- cma_leave_roce_mc_group(id_priv, mc);
- }
- return;
- }
+ WARN_ON(id_priv->cma_dev->device != id->device);
+ destroy_mc(id_priv, mc);
+ return;
}
spin_unlock_irq(&id_priv->lock);
}
--
2.25.1
From: Necip Fazil Yildiran <[email protected]>
[ Upstream commit 63bcf87cb1c57956e1179f1a78dde625c7e3cba7 ]
When ARC_SOC_HSDK is enabled and RESET_CONTROLLER is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for RESET_HSDK
Depends on [n]: RESET_CONTROLLER [=n] && HAS_IOMEM [=y] && (ARC_SOC_HSDK [=y] || COMPILE_TEST [=n])
Selected by [y]:
- ARC_SOC_HSDK [=y] && ISA_ARCV2 [=y]
The reason is that ARC_SOC_HSDK selects RESET_HSDK without depending on or
selecting RESET_CONTROLLER while RESET_HSDK is subordinate to
RESET_CONTROLLER.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: a528629dfd3b ("ARC: [plat-hsdk] select CONFIG_RESET_HSDK from Kconfig")
Signed-off-by: Necip Fazil Yildiran <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/plat-hsdk/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index ce81018345184..6b5c54576f54d 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -8,5 +8,6 @@ menuconfig ARC_SOC_HSDK
select ARC_HAS_ACCL_REGS
select ARC_IRQ_NO_AUTOSAVE
select CLK_HSDK
+ select RESET_CONTROLLER
select RESET_HSDK
select HAVE_PCI
--
2.25.1
From: Lang Cheng <[email protected]>
[ Upstream commit e0ef0f68c4c0d85b1eb63f38d5d10324361280e8 ]
It should be considered an illegal operation if the ULP attempts to modify
a QP from another state to the current hardware state. Otherwise, the ULP
can modify some fields of QPC at any time. For example, for a QP in state
of RTS, modify it from RTR to RTS can change the PSN, which is always not
as expected.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lang Cheng <[email protected]>
Signed-off-by: Weihang Li <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_qp.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c
index 4edea397b6b80..4486c9b7c3e43 100644
--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -1171,8 +1171,10 @@ int hns_roce_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
mutex_lock(&hr_qp->mutex);
- cur_state = attr_mask & IB_QP_CUR_STATE ?
- attr->cur_qp_state : (enum ib_qp_state)hr_qp->state;
+ if (attr_mask & IB_QP_CUR_STATE && attr->cur_qp_state != hr_qp->state)
+ goto out;
+
+ cur_state = hr_qp->state;
new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state;
if (ibqp->uobject &&
--
2.25.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 3e1b6469f8324bee5927b063e2aca30d3e56b907 ]
Building lpddr2_nvm with clang can result in a giant stack usage
in one function:
drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]
The problem is that clang decides to build a copy of the mtd_info
structure on the stack and then do a memcpy() into the actual version. It
shouldn't really do it that way, but it's not strictly a bug either.
As a workaround, use a static const version of the structure to assign
most of the members upfront and then only set the few members that
require runtime knowledge at probe time.
Fixes: 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/lpddr/lpddr2_nvm.c | 35 ++++++++++++++++++----------------
1 file changed, 19 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c
index 0f1547f09d08b..72f5c7b300790 100644
--- a/drivers/mtd/lpddr/lpddr2_nvm.c
+++ b/drivers/mtd/lpddr/lpddr2_nvm.c
@@ -393,6 +393,17 @@ static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
}
+static const struct mtd_info lpddr2_nvm_mtd_info = {
+ .type = MTD_RAM,
+ .writesize = 1,
+ .flags = (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+ ._read = lpddr2_nvm_read,
+ ._write = lpddr2_nvm_write,
+ ._erase = lpddr2_nvm_erase,
+ ._unlock = lpddr2_nvm_unlock,
+ ._lock = lpddr2_nvm_lock,
+};
+
/*
* lpddr2_nvm driver probe method
*/
@@ -433,6 +444,7 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
.pfow_base = OW_BASE_ADDRESS,
.fldrv_priv = pcm_data,
};
+
if (IS_ERR(map->virt))
return PTR_ERR(map->virt);
@@ -444,22 +456,13 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
return PTR_ERR(pcm_data->ctl_regs);
/* Populate mtd_info data structure */
- *mtd = (struct mtd_info) {
- .dev = { .parent = &pdev->dev },
- .name = pdev->dev.init_name,
- .type = MTD_RAM,
- .priv = map,
- .size = resource_size(add_range),
- .erasesize = ERASE_BLOCKSIZE * pcm_data->bus_width,
- .writesize = 1,
- .writebufsize = WRITE_BUFFSIZE * pcm_data->bus_width,
- .flags = (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
- ._read = lpddr2_nvm_read,
- ._write = lpddr2_nvm_write,
- ._erase = lpddr2_nvm_erase,
- ._unlock = lpddr2_nvm_unlock,
- ._lock = lpddr2_nvm_lock,
- };
+ *mtd = lpddr2_nvm_mtd_info;
+ mtd->dev.parent = &pdev->dev;
+ mtd->name = pdev->dev.init_name;
+ mtd->priv = map;
+ mtd->size = resource_size(add_range);
+ mtd->erasesize = ERASE_BLOCKSIZE * pcm_data->bus_width;
+ mtd->writebufsize = WRITE_BUFFSIZE * pcm_data->bus_width;
/* Verify the presence of the device looking for PFOW string */
if (!lpddr2_nvm_pfow_present(map)) {
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 98837c6c3d7285f6eca86480b6f7fac6880e27a8 ]
This value is locked under the file->mut, ensure it is held whenever
touching it.
The case in ucma_migrate_id() is a race, while in ucma_free_uctx() it is
already not possible for the write side to run, the movement is just for
clarity.
Fixes: 88314e4dda1e ("RDMA/cma: add support for rdma_migrate_id()")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/ucma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index d03dacaef7880..cf283b70bf877 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -586,6 +586,7 @@ static int ucma_free_ctx(struct ucma_context *ctx)
list_move_tail(&uevent->list, &list);
}
list_del(&ctx->list);
+ events_reported = ctx->events_reported;
mutex_unlock(&ctx->file->mut);
list_for_each_entry_safe(uevent, tmp, &list, list) {
@@ -595,7 +596,6 @@ static int ucma_free_ctx(struct ucma_context *ctx)
kfree(uevent);
}
- events_reported = ctx->events_reported;
mutex_destroy(&ctx->mutex);
kfree(ctx);
return events_reported;
@@ -1678,7 +1678,9 @@ static ssize_t ucma_migrate_id(struct ucma_file *new_file,
cur_file = ctx->file;
if (cur_file == new_file) {
+ mutex_lock(&cur_file->mut);
resp.events_reported = ctx->events_reported;
+ mutex_unlock(&cur_file->mut);
goto response;
}
--
2.25.1
From: Mark Tomlinson <[email protected]>
[ Upstream commit c1cf1d57d1492235309111ea6a900940213a9166 ]
If calling mtdoops_write, don't also schedule work to be done later.
Although this appears to not be causing an issue, possibly because the
scheduled work will never get done, it is confusing.
Fixes: 016c1291ce70 ("mtd: mtdoops: do not use mtd->panic_write directly")
Signed-off-by: Mark Tomlinson <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/mtdoops.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index 4ced68be7ed7e..774970bfcf859 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -279,12 +279,13 @@ static void mtdoops_do_dump(struct kmsg_dumper *dumper,
kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
record_size - MTDOOPS_HEADER_SIZE, NULL);
- /* Panics must be written immediately */
- if (reason != KMSG_DUMP_OOPS)
+ if (reason != KMSG_DUMP_OOPS) {
+ /* Panics must be written immediately */
mtdoops_write(cxt, 1);
-
- /* For other cases, schedule work to write it "nicely" */
- schedule_work(&cxt->work_write);
+ } else {
+ /* For other cases, schedule work to write it "nicely" */
+ schedule_work(&cxt->work_write);
+ }
}
static void mtdoops_notify_add(struct mtd_info *mtd)
--
2.25.1
From: Håkon Bugge <[email protected]>
[ Upstream commit 785167a114855c5aa75efca97000e405c2cc85bf ]
When scheduling delayed work to clean up the cache, if the entry already
has been scheduled for deletion, we adjust the delay.
Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Håkon Bugge <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx4/cm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index b591861934b3c..81d6a3460b55d 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -280,6 +280,9 @@ static void schedule_delayed(struct ib_device *ibdev, struct id_map_entry *id)
if (!sriov->is_going_down && !id->scheduled_delete) {
id->scheduled_delete = 1;
schedule_delayed_work(&id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
+ } else if (id->scheduled_delete) {
+ /* Adjust timeout if already scheduled */
+ mod_delayed_work(system_wq, &id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
}
spin_unlock_irqrestore(&sriov->going_down_lock, flags);
spin_unlock(&sriov->id_map_lock);
--
2.25.1
From: Nathan Lynch <[email protected]>
[ Upstream commit 9d6792ffe140240ae54c881cc4183f9acc24b4df ]
The drmem lmb list can have hundreds of thousands of entries, and
unfortunately lookups take the form of linear searches. As long as
this is the case, traversals have the potential to monopolize the CPU
and provoke lockup reports, workqueue stalls, and the like unless
they explicitly yield.
Rather than placing cond_resched() calls within various
for_each_drmem_lmb() loop blocks in the code, put it in the iteration
expression of the loop macro itself so users can't omit it.
Introduce a drmem_lmb_next() iteration helper function which calls
cond_resched() at a regular interval during array traversal. Each
iteration of the loop in DLPAR code paths can involve around ten RTAS
calls which can each take up to 250us, so this ensures the check is
performed at worst every few milliseconds.
Fixes: 6c6ea53725b3 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format")
Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/drmem.h | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/drmem.h b/arch/powerpc/include/asm/drmem.h
index 414d209f45bbe..1ec6de1a88514 100644
--- a/arch/powerpc/include/asm/drmem.h
+++ b/arch/powerpc/include/asm/drmem.h
@@ -8,6 +8,8 @@
#ifndef _ASM_POWERPC_LMB_H
#define _ASM_POWERPC_LMB_H
+#include <linux/sched.h>
+
struct drmem_lmb {
u64 base_addr;
u32 drc_index;
@@ -26,8 +28,22 @@ struct drmem_lmb_info {
extern struct drmem_lmb_info *drmem_info;
+static inline struct drmem_lmb *drmem_lmb_next(struct drmem_lmb *lmb,
+ const struct drmem_lmb *start)
+{
+ /*
+ * DLPAR code paths can take several milliseconds per element
+ * when interacting with firmware. Ensure that we don't
+ * unfairly monopolize the CPU.
+ */
+ if (((++lmb - start) % 16) == 0)
+ cond_resched();
+
+ return lmb;
+}
+
#define for_each_drmem_lmb_in_range(lmb, start, end) \
- for ((lmb) = (start); (lmb) < (end); (lmb)++)
+ for ((lmb) = (start); (lmb) < (end); lmb = drmem_lmb_next(lmb, start))
#define for_each_drmem_lmb(lmb) \
for_each_drmem_lmb_in_range((lmb), \
--
2.25.1
From: Toke Høiland-Jørgensen <[email protected]>
[ Upstream commit 1af9270e908cd50a4f5d815c9b6f794c7d57ed07 ]
>From the checks and commit messages for modify_return, it seems it was
never the intention that it should be possible to attach a tracing program
with expected_attach_type == BPF_MODIFY_RETURN to another BPF program.
However, check_attach_modify_return() will only look at the function name,
so if the target function starts with "security_", the attach will be
allowed even for bpf2bpf attachment.
Fix this oversight by also blocking the modification if a target program is
supplied.
Fixes: 18644cec714a ("bpf: Fix use-after-free in fmod_ret check")
Fixes: 6ba43b761c41 ("bpf: Attachment verification for BPF_MODIFY_RETURN")
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 89b07db146763..c953dfbbaa6a9 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -10862,6 +10862,11 @@ static int check_attach_btf_id(struct bpf_verifier_env *env)
}
if (prog->expected_attach_type == BPF_MODIFY_RETURN) {
+ if (tgt_prog) {
+ verbose(env, "can't modify return codes of BPF programs\n");
+ ret = -EINVAL;
+ goto out;
+ }
ret = check_attach_modify_return(prog, addr);
if (ret)
verbose(env, "%s() is not modifiable\n",
--
2.25.1
From: Leon Romanovsky <[email protected]>
[ Upstream commit 43d781b9fa562f0c6e50f62c870fbfeb9dc85213 ]
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6dbd ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cq.c | 5 ++++-
drivers/infiniband/core/verbs.c | 9 +++++++--
drivers/infiniband/hw/bnxt_re/ib_verbs.c | 3 ++-
drivers/infiniband/hw/bnxt_re/ib_verbs.h | 2 +-
drivers/infiniband/hw/cxgb4/cq.c | 3 ++-
drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 2 +-
drivers/infiniband/hw/efa/efa.h | 2 +-
drivers/infiniband/hw/efa/efa_verbs.c | 3 ++-
drivers/infiniband/hw/hns/hns_roce_cq.c | 3 ++-
drivers/infiniband/hw/hns/hns_roce_device.h | 4 ++--
drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 3 ++-
drivers/infiniband/hw/i40iw/i40iw_verbs.c | 3 ++-
drivers/infiniband/hw/mlx4/cq.c | 3 ++-
drivers/infiniband/hw/mlx4/mlx4_ib.h | 2 +-
drivers/infiniband/hw/mlx5/cq.c | 9 +++++++--
drivers/infiniband/hw/mlx5/mlx5_ib.h | 2 +-
drivers/infiniband/hw/mthca/mthca_provider.c | 3 ++-
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 3 ++-
drivers/infiniband/hw/ocrdma/ocrdma_verbs.h | 2 +-
drivers/infiniband/hw/qedr/verbs.c | 5 +++--
drivers/infiniband/hw/qedr/verbs.h | 2 +-
drivers/infiniband/hw/usnic/usnic_ib_verbs.c | 4 ++--
drivers/infiniband/hw/usnic/usnic_ib_verbs.h | 2 +-
drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c | 3 ++-
drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h | 2 +-
drivers/infiniband/sw/rdmavt/cq.c | 3 ++-
drivers/infiniband/sw/rdmavt/cq.h | 2 +-
drivers/infiniband/sw/rxe/rxe_verbs.c | 3 ++-
drivers/infiniband/sw/siw/siw_verbs.c | 3 ++-
drivers/infiniband/sw/siw/siw_verbs.h | 2 +-
include/rdma/ib_verbs.h | 6 ++++--
31 files changed, 66 insertions(+), 37 deletions(-)
diff --git a/drivers/infiniband/core/cq.c b/drivers/infiniband/core/cq.c
index 2efe825689e3e..19e36e52181be 100644
--- a/drivers/infiniband/core/cq.c
+++ b/drivers/infiniband/core/cq.c
@@ -319,6 +319,8 @@ EXPORT_SYMBOL(__ib_alloc_cq_any);
*/
void ib_free_cq(struct ib_cq *cq)
{
+ int ret;
+
if (WARN_ON_ONCE(atomic_read(&cq->usecnt)))
return;
if (WARN_ON_ONCE(cq->cqe_used))
@@ -340,8 +342,9 @@ void ib_free_cq(struct ib_cq *cq)
rdma_dim_destroy(cq);
trace_cq_free(cq);
+ ret = cq->device->ops.destroy_cq(cq, NULL);
+ WARN_ONCE(ret, "Destroy of kernel CQ shouldn't fail");
rdma_restrack_del(&cq->res);
- cq->device->ops.destroy_cq(cq, NULL);
kfree(cq->wc);
kfree(cq);
}
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 1b0ea945756f0..2e397d18dbf44 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -2016,16 +2016,21 @@ EXPORT_SYMBOL(rdma_set_cq_moderation);
int ib_destroy_cq_user(struct ib_cq *cq, struct ib_udata *udata)
{
+ int ret;
+
if (WARN_ON_ONCE(cq->shared))
return -EOPNOTSUPP;
if (atomic_read(&cq->usecnt))
return -EBUSY;
+ ret = cq->device->ops.destroy_cq(cq, udata);
+ if (ret)
+ return ret;
+
rdma_restrack_del(&cq->res);
- cq->device->ops.destroy_cq(cq, udata);
kfree(cq);
- return 0;
+ return ret;
}
EXPORT_SYMBOL(ib_destroy_cq_user);
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index cb6e873039df5..9f69abf01d331 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -2714,7 +2714,7 @@ int bnxt_re_post_recv(struct ib_qp *ib_qp, const struct ib_recv_wr *wr,
}
/* Completion Queues */
-void bnxt_re_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
+int bnxt_re_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
{
struct bnxt_re_cq *cq;
struct bnxt_qplib_nq *nq;
@@ -2730,6 +2730,7 @@ void bnxt_re_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
atomic_dec(&rdev->cq_count);
nq->budget--;
kfree(cq->cql);
+ return 0;
}
int bnxt_re_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.h b/drivers/infiniband/hw/bnxt_re/ib_verbs.h
index e5fbbeba6d28d..f4a0ded67a8aa 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.h
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.h
@@ -193,7 +193,7 @@ int bnxt_re_post_recv(struct ib_qp *qp, const struct ib_recv_wr *recv_wr,
const struct ib_recv_wr **bad_recv_wr);
int bnxt_re_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
-void bnxt_re_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
+int bnxt_re_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
int bnxt_re_poll_cq(struct ib_cq *cq, int num_entries, struct ib_wc *wc);
int bnxt_re_req_notify_cq(struct ib_cq *cq, enum ib_cq_notify_flags flags);
struct ib_mr *bnxt_re_get_dma_mr(struct ib_pd *pd, int mr_access_flags);
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index b1bb61c65f4f6..7b076fc23cf38 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -967,7 +967,7 @@ int c4iw_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc)
return !err || err == -ENODATA ? npolled : err;
}
-void c4iw_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
+int c4iw_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
{
struct c4iw_cq *chp;
struct c4iw_ucontext *ucontext;
@@ -985,6 +985,7 @@ void c4iw_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
ucontext ? &ucontext->uctx : &chp->cq.rdev->uctx,
chp->destroy_skb, chp->wr_waitp);
c4iw_put_wr_wait(chp->wr_waitp);
+ return 0;
}
int c4iw_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index e8e11bd95e429..de0f278e31501 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -992,7 +992,7 @@ struct ib_mr *c4iw_reg_user_mr(struct ib_pd *pd, u64 start,
struct ib_udata *udata);
struct ib_mr *c4iw_get_dma_mr(struct ib_pd *pd, int acc);
int c4iw_dereg_mr(struct ib_mr *ib_mr, struct ib_udata *udata);
-void c4iw_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata);
+int c4iw_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata);
int c4iw_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
int c4iw_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags flags);
diff --git a/drivers/infiniband/hw/efa/efa.h b/drivers/infiniband/hw/efa/efa.h
index 1889dd172a252..05f593940e7b0 100644
--- a/drivers/infiniband/hw/efa/efa.h
+++ b/drivers/infiniband/hw/efa/efa.h
@@ -139,7 +139,7 @@ int efa_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata);
struct ib_qp *efa_create_qp(struct ib_pd *ibpd,
struct ib_qp_init_attr *init_attr,
struct ib_udata *udata);
-void efa_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata);
+int efa_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata);
int efa_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
struct ib_mr *efa_reg_mr(struct ib_pd *ibpd, u64 start, u64 length,
diff --git a/drivers/infiniband/hw/efa/efa_verbs.c b/drivers/infiniband/hw/efa/efa_verbs.c
index 7dd082441333c..bd2caa2353c75 100644
--- a/drivers/infiniband/hw/efa/efa_verbs.c
+++ b/drivers/infiniband/hw/efa/efa_verbs.c
@@ -843,7 +843,7 @@ static int efa_destroy_cq_idx(struct efa_dev *dev, int cq_idx)
return efa_com_destroy_cq(&dev->edev, ¶ms);
}
-void efa_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
+int efa_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
{
struct efa_dev *dev = to_edev(ibcq->device);
struct efa_cq *cq = to_ecq(ibcq);
@@ -856,6 +856,7 @@ void efa_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
efa_destroy_cq_idx(dev, cq->cq_idx);
efa_free_mapped(dev, cq->cpu_addr, cq->dma_addr, cq->size,
DMA_FROM_DEVICE);
+ return 0;
}
static int cq_mmap_entries_setup(struct efa_dev *dev, struct efa_cq *cq,
diff --git a/drivers/infiniband/hw/hns/hns_roce_cq.c b/drivers/infiniband/hw/hns/hns_roce_cq.c
index e87d616f79882..c5acf3332519b 100644
--- a/drivers/infiniband/hw/hns/hns_roce_cq.c
+++ b/drivers/infiniband/hw/hns/hns_roce_cq.c
@@ -311,7 +311,7 @@ int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr,
return ret;
}
-void hns_roce_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
+int hns_roce_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
{
struct hns_roce_dev *hr_dev = to_hr_dev(ib_cq->device);
struct hns_roce_cq *hr_cq = to_hr_cq(ib_cq);
@@ -322,6 +322,7 @@ void hns_roce_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
free_cq_buf(hr_dev, hr_cq);
free_cq_db(hr_dev, hr_cq, udata);
free_cqc(hr_dev, hr_cq);
+ return 0;
}
void hns_roce_cq_completion(struct hns_roce_dev *hr_dev, u32 cqn)
diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h
index c69453a62767c..77ca55b559a0a 100644
--- a/drivers/infiniband/hw/hns/hns_roce_device.h
+++ b/drivers/infiniband/hw/hns/hns_roce_device.h
@@ -929,7 +929,7 @@ struct hns_roce_hw {
int (*poll_cq)(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc);
int (*dereg_mr)(struct hns_roce_dev *hr_dev, struct hns_roce_mr *mr,
struct ib_udata *udata);
- void (*destroy_cq)(struct ib_cq *ibcq, struct ib_udata *udata);
+ int (*destroy_cq)(struct ib_cq *ibcq, struct ib_udata *udata);
int (*modify_cq)(struct ib_cq *cq, u16 cq_count, u16 cq_period);
int (*init_eq)(struct hns_roce_dev *hr_dev);
void (*cleanup_eq)(struct hns_roce_dev *hr_dev);
@@ -1246,7 +1246,7 @@ int to_hr_qp_type(int qp_type);
int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
-void hns_roce_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata);
+int hns_roce_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata);
int hns_roce_db_map_user(struct hns_roce_ucontext *context,
struct ib_udata *udata, unsigned long virt,
struct hns_roce_db *db);
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
index cf39f560b8001..87c93f303b9a8 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
@@ -3573,7 +3573,7 @@ int hns_roce_v1_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata)
return 0;
}
-static void hns_roce_v1_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
+static int hns_roce_v1_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
{
struct hns_roce_dev *hr_dev = to_hr_dev(ibcq->device);
struct hns_roce_cq *hr_cq = to_hr_cq(ibcq);
@@ -3604,6 +3604,7 @@ static void hns_roce_v1_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
}
wait_time++;
}
+ return 0;
}
static void set_eq_cons_index_v1(struct hns_roce_eq *eq, int req_not)
diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c
index 19af29a48c559..c3087b8738ed7 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c
@@ -1053,7 +1053,7 @@ void i40iw_cq_wq_destroy(struct i40iw_device *iwdev, struct i40iw_sc_cq *cq)
* @ib_cq: cq pointer
* @udata: user data or NULL for kernel object
*/
-static void i40iw_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
+static int i40iw_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
{
struct i40iw_cq *iwcq;
struct i40iw_device *iwdev;
@@ -1065,6 +1065,7 @@ static void i40iw_destroy_cq(struct ib_cq *ib_cq, struct ib_udata *udata)
i40iw_cq_wq_destroy(iwdev, cq);
cq_free_resources(iwdev, iwcq);
i40iw_rem_devusecount(iwdev);
+ return 0;
}
/**
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index f8b936b76dcdf..3851316407ceb 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -475,7 +475,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
return err;
}
-void mlx4_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
+int mlx4_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
{
struct mlx4_ib_dev *dev = to_mdev(cq->device);
struct mlx4_ib_cq *mcq = to_mcq(cq);
@@ -495,6 +495,7 @@ void mlx4_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
mlx4_db_free(dev->dev, &mcq->db);
}
ib_umem_release(mcq->umem);
+ return 0;
}
static void dump_cqe(void *cqe)
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 5ec3b747c1aea..bac526a703173 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -738,7 +738,7 @@ int mlx4_ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period);
int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata);
int mlx4_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
-void mlx4_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
+int mlx4_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
int mlx4_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc);
int mlx4_ib_arm_cq(struct ib_cq *cq, enum ib_cq_notify_flags flags);
void __mlx4_ib_cq_clean(struct mlx4_ib_cq *cq, u32 qpn, struct mlx4_ib_srq *srq);
diff --git a/drivers/infiniband/hw/mlx5/cq.c b/drivers/infiniband/hw/mlx5/cq.c
index 3ca379513d0e6..ec634085e1d9a 100644
--- a/drivers/infiniband/hw/mlx5/cq.c
+++ b/drivers/infiniband/hw/mlx5/cq.c
@@ -1024,16 +1024,21 @@ int mlx5_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
return err;
}
-void mlx5_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
+int mlx5_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
{
struct mlx5_ib_dev *dev = to_mdev(cq->device);
struct mlx5_ib_cq *mcq = to_mcq(cq);
+ int ret;
+
+ ret = mlx5_core_destroy_cq(dev->mdev, &mcq->mcq);
+ if (ret)
+ return ret;
- mlx5_core_destroy_cq(dev->mdev, &mcq->mcq);
if (udata)
destroy_cq_user(mcq, udata);
else
destroy_cq_kernel(dev, mcq);
+ return 0;
}
static int is_equal_rsn(struct mlx5_cqe64 *cqe64, u32 rsn)
diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index 5dbe3eb0d9cb9..3825cdec6ac68 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -1180,7 +1180,7 @@ int mlx5_ib_read_wqe_srq(struct mlx5_ib_srq *srq, int wqe_index, void *buffer,
size_t buflen, size_t *bc);
int mlx5_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
-void mlx5_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
+int mlx5_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
int mlx5_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc);
int mlx5_ib_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags flags);
int mlx5_ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period);
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 9fa2f9164a47b..2ad15adf304e5 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -789,7 +789,7 @@ static int mthca_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *uda
return ret;
}
-static void mthca_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
+static int mthca_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
{
if (udata) {
struct mthca_ucontext *context =
@@ -808,6 +808,7 @@ static void mthca_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
to_mcq(cq)->set_ci_db_index);
}
mthca_free_cq(to_mdev(cq->device), to_mcq(cq));
+ return 0;
}
static inline u32 convert_access(int acc)
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
index d11c74390a124..927c70d1ffbc3 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
@@ -1056,7 +1056,7 @@ static void ocrdma_flush_cq(struct ocrdma_cq *cq)
spin_unlock_irqrestore(&cq->cq_lock, flags);
}
-void ocrdma_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
+int ocrdma_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
{
struct ocrdma_cq *cq = get_ocrdma_cq(ibcq);
struct ocrdma_eq *eq = NULL;
@@ -1081,6 +1081,7 @@ void ocrdma_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
ocrdma_get_db_addr(dev, pdid),
dev->nic_info.db_page_size);
}
+ return 0;
}
static int ocrdma_add_qpn_map(struct ocrdma_dev *dev, struct ocrdma_qp *qp)
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.h b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.h
index 3a5010881be5b..c46412dff924a 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.h
@@ -72,7 +72,7 @@ void ocrdma_dealloc_pd(struct ib_pd *pd, struct ib_udata *udata);
int ocrdma_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
int ocrdma_resize_cq(struct ib_cq *, int cqe, struct ib_udata *);
-void ocrdma_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata);
+int ocrdma_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata);
struct ib_qp *ocrdma_create_qp(struct ib_pd *,
struct ib_qp_init_attr *attrs,
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 1a7f1f805be3e..8092821680438 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -1050,7 +1050,7 @@ int qedr_resize_cq(struct ib_cq *ibcq, int new_cnt, struct ib_udata *udata)
#define QEDR_DESTROY_CQ_MAX_ITERATIONS (10)
#define QEDR_DESTROY_CQ_ITER_DURATION (10)
-void qedr_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
+int qedr_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
{
struct qedr_dev *dev = get_qedr_dev(ibcq->device);
struct qed_rdma_destroy_cq_out_params oparams;
@@ -1065,7 +1065,7 @@ void qedr_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
/* GSIs CQs are handled by driver, so they don't exist in the FW */
if (cq->cq_type == QEDR_CQ_TYPE_GSI) {
qedr_db_recovery_del(dev, cq->db_addr, &cq->db.data);
- return;
+ return 0;
}
iparams.icid = cq->icid;
@@ -1113,6 +1113,7 @@ void qedr_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
* Since the destroy CQ ramrod has also been received on the EQ we can
* be certain that there's no event handler in process.
*/
+ return 0;
}
static inline int get_gid_info_from_table(struct ib_qp *ibqp,
diff --git a/drivers/infiniband/hw/qedr/verbs.h b/drivers/infiniband/hw/qedr/verbs.h
index 5e02387e068d1..e0db3bc1653e2 100644
--- a/drivers/infiniband/hw/qedr/verbs.h
+++ b/drivers/infiniband/hw/qedr/verbs.h
@@ -52,7 +52,7 @@ void qedr_dealloc_pd(struct ib_pd *pd, struct ib_udata *udata);
int qedr_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
int qedr_resize_cq(struct ib_cq *, int cqe, struct ib_udata *);
-void qedr_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata);
+int qedr_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata);
int qedr_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags flags);
struct ib_qp *qedr_create_qp(struct ib_pd *, struct ib_qp_init_attr *attrs,
struct ib_udata *);
diff --git a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
index b8a77ce115908..586ff16be1bb3 100644
--- a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
+++ b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
@@ -596,9 +596,9 @@ int usnic_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
return 0;
}
-void usnic_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
+int usnic_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
{
- return;
+ return 0;
}
struct ib_mr *usnic_ib_reg_mr(struct ib_pd *pd, u64 start, u64 length,
diff --git a/drivers/infiniband/hw/usnic/usnic_ib_verbs.h b/drivers/infiniband/hw/usnic/usnic_ib_verbs.h
index 2aedf78c13cf2..f13b08c59b9a3 100644
--- a/drivers/infiniband/hw/usnic/usnic_ib_verbs.h
+++ b/drivers/infiniband/hw/usnic/usnic_ib_verbs.h
@@ -60,7 +60,7 @@ int usnic_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask, struct ib_udata *udata);
int usnic_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
-void usnic_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
+int usnic_ib_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
struct ib_mr *usnic_ib_reg_mr(struct ib_pd *pd, u64 start, u64 length,
u64 virt_addr, int access_flags,
struct ib_udata *udata);
diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c
index 4f6cc0de7ef95..6d3e6389e47da 100644
--- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c
+++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c
@@ -235,7 +235,7 @@ static void pvrdma_free_cq(struct pvrdma_dev *dev, struct pvrdma_cq *cq)
* @cq: the completion queue to destroy.
* @udata: user data or null for kernel object
*/
-void pvrdma_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
+int pvrdma_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
{
struct pvrdma_cq *vcq = to_vcq(cq);
union pvrdma_cmd_req req;
@@ -261,6 +261,7 @@ void pvrdma_destroy_cq(struct ib_cq *cq, struct ib_udata *udata)
pvrdma_free_cq(dev, vcq);
atomic_dec(&dev->num_cqs);
+ return 0;
}
static inline struct pvrdma_cqe *get_cqe(struct pvrdma_cq *cq, int i)
diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h
index 267702226f108..af36e9f767eed 100644
--- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h
+++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h
@@ -411,7 +411,7 @@ int pvrdma_map_mr_sg(struct ib_mr *ibmr, struct scatterlist *sg,
int sg_nents, unsigned int *sg_offset);
int pvrdma_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
-void pvrdma_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
+int pvrdma_destroy_cq(struct ib_cq *cq, struct ib_udata *udata);
int pvrdma_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc);
int pvrdma_req_notify_cq(struct ib_cq *cq, enum ib_cq_notify_flags flags);
int pvrdma_create_ah(struct ib_ah *ah, struct rdma_ah_init_attr *init_attr,
diff --git a/drivers/infiniband/sw/rdmavt/cq.c b/drivers/infiniband/sw/rdmavt/cq.c
index 04d2e72017fed..19248be140933 100644
--- a/drivers/infiniband/sw/rdmavt/cq.c
+++ b/drivers/infiniband/sw/rdmavt/cq.c
@@ -315,7 +315,7 @@ int rvt_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
*
* Called by ib_destroy_cq() in the generic verbs code.
*/
-void rvt_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
+int rvt_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
{
struct rvt_cq *cq = ibcq_to_rvtcq(ibcq);
struct rvt_dev_info *rdi = cq->rdi;
@@ -328,6 +328,7 @@ void rvt_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
kref_put(&cq->ip->ref, rvt_release_mmap_info);
else
vfree(cq->kqueue);
+ return 0;
}
/**
diff --git a/drivers/infiniband/sw/rdmavt/cq.h b/drivers/infiniband/sw/rdmavt/cq.h
index 5e26a2eb19a4c..feb01e7ee0044 100644
--- a/drivers/infiniband/sw/rdmavt/cq.h
+++ b/drivers/infiniband/sw/rdmavt/cq.h
@@ -53,7 +53,7 @@
int rvt_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
-void rvt_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata);
+int rvt_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata);
int rvt_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags notify_flags);
int rvt_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata);
int rvt_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry);
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
index 00ba6fb1e6763..452748b3854b5 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -816,13 +816,14 @@ static int rxe_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
return rxe_add_to_pool(&rxe->cq_pool, &cq->pelem);
}
-static void rxe_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
+static int rxe_destroy_cq(struct ib_cq *ibcq, struct ib_udata *udata)
{
struct rxe_cq *cq = to_rcq(ibcq);
rxe_cq_disable(cq);
rxe_drop_ref(cq);
+ return 0;
}
static int rxe_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata)
diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index 987e2ba05dbc0..7e657f90ca4f4 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -1064,7 +1064,7 @@ int siw_post_receive(struct ib_qp *base_qp, const struct ib_recv_wr *wr,
return rv > 0 ? 0 : rv;
}
-void siw_destroy_cq(struct ib_cq *base_cq, struct ib_udata *udata)
+int siw_destroy_cq(struct ib_cq *base_cq, struct ib_udata *udata)
{
struct siw_cq *cq = to_siw_cq(base_cq);
struct siw_device *sdev = to_siw_dev(base_cq->device);
@@ -1082,6 +1082,7 @@ void siw_destroy_cq(struct ib_cq *base_cq, struct ib_udata *udata)
atomic_dec(&sdev->num_cq);
vfree(cq->queue);
+ return 0;
}
/*
diff --git a/drivers/infiniband/sw/siw/siw_verbs.h b/drivers/infiniband/sw/siw/siw_verbs.h
index 1a731989fad60..b0b7488869104 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.h
+++ b/drivers/infiniband/sw/siw/siw_verbs.h
@@ -63,7 +63,7 @@ int siw_post_send(struct ib_qp *base_qp, const struct ib_send_wr *wr,
const struct ib_send_wr **bad_wr);
int siw_post_receive(struct ib_qp *base_qp, const struct ib_recv_wr *wr,
const struct ib_recv_wr **bad_wr);
-void siw_destroy_cq(struct ib_cq *base_cq, struct ib_udata *udata);
+int siw_destroy_cq(struct ib_cq *base_cq, struct ib_udata *udata);
int siw_poll_cq(struct ib_cq *base_cq, int num_entries, struct ib_wc *wc);
int siw_req_notify_cq(struct ib_cq *base_cq, enum ib_cq_notify_flags flags);
struct ib_mr *siw_reg_user_mr(struct ib_pd *base_pd, u64 start, u64 len,
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index bfd1f38c495c7..d7809f203715f 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -2465,7 +2465,7 @@ struct ib_device_ops {
int (*create_cq)(struct ib_cq *cq, const struct ib_cq_init_attr *attr,
struct ib_udata *udata);
int (*modify_cq)(struct ib_cq *cq, u16 cq_count, u16 cq_period);
- void (*destroy_cq)(struct ib_cq *cq, struct ib_udata *udata);
+ int (*destroy_cq)(struct ib_cq *cq, struct ib_udata *udata);
int (*resize_cq)(struct ib_cq *cq, int cqe, struct ib_udata *udata);
struct ib_mr *(*get_dma_mr)(struct ib_pd *pd, int mr_access_flags);
struct ib_mr *(*reg_user_mr)(struct ib_pd *pd, u64 start, u64 length,
@@ -3922,7 +3922,9 @@ int ib_destroy_cq_user(struct ib_cq *cq, struct ib_udata *udata);
*/
static inline void ib_destroy_cq(struct ib_cq *cq)
{
- ib_destroy_cq_user(cq, NULL);
+ int ret = ib_destroy_cq_user(cq, NULL);
+
+ WARN_ONCE(ret, "Destroy of kernel CQ shouldn't fail");
}
/**
--
2.25.1
From: Christian Hewitt <[email protected]>
[ Upstream commit c2df75ad2a9f205820e4bc0db936d3d9af3da1ae ]
Amlogic SoC devices report the following errors frequently causing excessive
dmesg log spam and early log rotataion, although the errors appear to be
harmless as everything works fine:
[ 7.202702] panfrost ffe40000.gpu: error powering up gpu L2
[ 7.203760] panfrost ffe40000.gpu: error powering up gpu shader
ARM staff have advised increasing the timeout values to eliminate the errors
in most normal scenarios, and testing with several different G31/G52 devices
shows 20000 to be a reliable value.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Suggested-by: Steven Price <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panfrost/panfrost_gpu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index 689b92893e0e1..dfe4c9151eaf2 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -309,13 +309,13 @@ void panfrost_gpu_power_on(struct panfrost_device *pfdev)
/* Just turn on everything for now */
gpu_write(pfdev, L2_PWRON_LO, pfdev->features.l2_present);
ret = readl_relaxed_poll_timeout(pfdev->iomem + L2_READY_LO,
- val, val == pfdev->features.l2_present, 100, 1000);
+ val, val == pfdev->features.l2_present, 100, 20000);
if (ret)
dev_err(pfdev->dev, "error powering up gpu L2");
gpu_write(pfdev, SHADER_PWRON_LO, pfdev->features.shader_present);
ret = readl_relaxed_poll_timeout(pfdev->iomem + SHADER_READY_LO,
- val, val == pfdev->features.shader_present, 100, 1000);
+ val, val == pfdev->features.shader_present, 100, 20000);
if (ret)
dev_err(pfdev->dev, "error powering up gpu shader");
--
2.25.1
From: Tingwei Zhang <[email protected]>
[ Upstream commit 716f5652a13122364a65e694386b9b26f5e98c51 ]
When coresight_build_path() fails on all the cpus, etm_setup_aux
calls etm_free_aux() to free allocated event_data.
WARN_ON(cpumask_empty(mask) will be triggered since cpu mask is empty.
Check event_data->snk_config is not NULL first to avoid this
warning.
Fixes: f5200aa9831f38 ("coresight: perf: Refactor function free_event_data()")
Reviewed-by: Mike Leach <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Tingwei Zhang <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm-perf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index c4b9898e28418..9b0c5d719232f 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -126,10 +126,10 @@ static void free_sink_buffer(struct etm_event_data *event_data)
cpumask_t *mask = &event_data->mask;
struct coresight_device *sink;
- if (WARN_ON(cpumask_empty(mask)))
+ if (!event_data->snk_config)
return;
- if (!event_data->snk_config)
+ if (WARN_ON(cpumask_empty(mask)))
return;
cpu = cpumask_first(mask);
--
2.25.1
From: Lijun Pan <[email protected]>
[ Upstream commit b9cd795b0e4860f482bf3741d12e1c8f3ec1cfc9 ]
Set up the speed according to crq->query_phys_parms.rsp.speed.
Fix IBMVNIC_10GBPS typo.
Fixes: f8d6ae0d27ec ("ibmvnic: Report actual backing device speed and duplex values")
Signed-off-by: Lijun Pan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 5 ++++-
drivers/net/ethernet/ibm/ibmvnic.h | 2 +-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 4dd3625a4fbc8..3e0aab04d86fb 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -4610,7 +4610,7 @@ static int handle_query_phys_parms_rsp(union ibmvnic_crq *crq,
case IBMVNIC_1GBPS:
adapter->speed = SPEED_1000;
break;
- case IBMVNIC_10GBP:
+ case IBMVNIC_10GBPS:
adapter->speed = SPEED_10000;
break;
case IBMVNIC_25GBPS:
@@ -4625,6 +4625,9 @@ static int handle_query_phys_parms_rsp(union ibmvnic_crq *crq,
case IBMVNIC_100GBPS:
adapter->speed = SPEED_100000;
break;
+ case IBMVNIC_200GBPS:
+ adapter->speed = SPEED_200000;
+ break;
default:
if (netif_carrier_ok(netdev))
netdev_warn(netdev, "Unknown speed 0x%08x\n", rspeed);
diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h
index f8416e1d4cf09..43feb96b0a68a 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.h
+++ b/drivers/net/ethernet/ibm/ibmvnic.h
@@ -373,7 +373,7 @@ struct ibmvnic_phys_parms {
#define IBMVNIC_10MBPS 0x40000000
#define IBMVNIC_100MBPS 0x20000000
#define IBMVNIC_1GBPS 0x10000000
-#define IBMVNIC_10GBP 0x08000000
+#define IBMVNIC_10GBPS 0x08000000
#define IBMVNIC_40GBPS 0x04000000
#define IBMVNIC_100GBPS 0x02000000
#define IBMVNIC_25GBPS 0x01000000
--
2.25.1
From: John Donnelly <[email protected]>
[ Upstream commit 61741d8699e1fc764a309ebd20211bb1cb193110 ]
Corrects drivers/target/target_core_user.c:688:6: warning: 'page' may be
used uninitialized.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3c58f737231e ("scsi: target: tcmu: Optimize use of flush_dcache_page")
Cc: Mike Christie <[email protected]>
Acked-by: Mike Christie <[email protected]>
Signed-off-by: John Donnelly <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 0209bc23e631e..13a280c780c39 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -669,7 +669,7 @@ static void scatter_data_area(struct tcmu_dev *udev,
void *from, *to = NULL;
size_t copy_bytes, to_offset, offset;
struct scatterlist *sg;
- struct page *page;
+ struct page *page = NULL;
for_each_sg(data_sg, sg, data_nents, i) {
int sg_remaining = sg->length;
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit a40c20dabdf9045270767c75918feb67f0727c89 ]
It is possible for a single SGL to span an aligned boundary, eg if the SGL
is
61440 -> 90112
Then the length is 28672, which currently limits the block size to
32k. With a 32k page size the two covering blocks will be:
32768->65536 and 65536->98304
However, the correct answer is a 128K block size which will span the whole
28672 bytes in a single block.
Instead of limiting based on length figure out which high IOVA bits don't
change between the start and end addresses. That is the highest useful
page size.
Fixes: 4a35339958f1 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Leon Romanovsky <[email protected]>
Reviewed-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/umem.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 82455a1392f1d..1173b8cbe92b5 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -156,8 +156,13 @@ unsigned long ib_umem_find_best_pgsz(struct ib_umem *umem,
return 0;
va = virt;
- /* max page size not to exceed MR length */
- mask = roundup_pow_of_two(umem->length);
+ /* The best result is the smallest page size that results in the minimum
+ * number of required pages. Compute the largest page size that could
+ * work based on VA address bits that don't change.
+ */
+ mask = pgsz_bitmap &
+ GENMASK(BITS_PER_LONG - 1,
+ bits_per((umem->length - 1 + virt) ^ virt));
/* offset into first SGL */
pgoff = umem->address & ~PAGE_MASK;
--
2.25.1
From: Mike Leach <[email protected]>
[ Upstream commit 1cce921bce7dcf6fef9bdfa4dcc9406383274408 ]
CTI code to remove sysfs link to other devices on shutdown, incorrectly
tries to remove a single ended link when these are all double ended. This
implementation leaves elements in the link info structure undefined which
results in a crash in recent tests for driver module unload.
This patch corrects the link removal code.
Fixes: 73274abb6557 ("coresight: cti: Add in sysfs links to other coresight devices")
Reported-by: Tingwei Zhang <[email protected]>
Signed-off-by: Mike Leach <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-cti.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c
index 47f3c9abae303..92aa535f9e134 100644
--- a/drivers/hwtracing/coresight/coresight-cti.c
+++ b/drivers/hwtracing/coresight/coresight-cti.c
@@ -494,12 +494,15 @@ static bool cti_add_sysfs_link(struct cti_drvdata *drvdata,
return !link_err;
}
-static void cti_remove_sysfs_link(struct cti_trig_con *tc)
+static void cti_remove_sysfs_link(struct cti_drvdata *drvdata,
+ struct cti_trig_con *tc)
{
struct coresight_sysfs_link link_info;
+ link_info.orig = drvdata->csdev;
link_info.orig_name = tc->con_dev_name;
link_info.target = tc->con_dev;
+ link_info.target_name = dev_name(&drvdata->csdev->dev);
coresight_remove_sysfs_link(&link_info);
}
@@ -590,7 +593,7 @@ void cti_remove_assoc_from_csdev(struct coresight_device *csdev)
ctidev = &ctidrv->ctidev;
list_for_each_entry(tc, &ctidev->trig_cons, node) {
if (tc->con_dev == csdev->ect_dev) {
- cti_remove_sysfs_link(tc);
+ cti_remove_sysfs_link(ctidrv, tc);
tc->con_dev = NULL;
break;
}
@@ -634,7 +637,7 @@ static void cti_remove_conn_xrefs(struct cti_drvdata *drvdata)
if (tc->con_dev) {
coresight_set_assoc_ectdev_mutex(tc->con_dev,
NULL);
- cti_remove_sysfs_link(tc);
+ cti_remove_sysfs_link(drvdata, tc);
tc->con_dev = NULL;
}
}
--
2.25.1
From: Logan Gunthorpe <[email protected]>
[ Upstream commit 028926e4ac8f21af343c25794117fd13c08b1712 ]
dma_alloc_coherent() is called with a fixed SZ_2M size, but frees happen
with IOAT_CHUNK_SIZE. Recently, IOAT_CHUNK_SIZE was reduced to 512M but
the allocation did not change. To fix, change to using the
IOAT_CHUNK_SIZE define.
This was caught with the upcoming patchset for converting Intel platforms to the
dma-iommu implementation. It has a warning when the unmapped size differs from
the mapped size.
Fixes: a02254f8a676 ("dmaengine: ioat: Decreasing allocation chunk size 2M->512K")
Suggested-by: Robin Murphy <[email protected]>
Signed-off-by: Logan Gunthorpe <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Dan Williams <[email protected]>
Link: https://lore.kernel.org/intel-gfx/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/ioat/dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index fd782aee02d92..98c56606ab1a9 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -389,7 +389,7 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
struct ioat_descs *descs = &ioat_chan->descs[i];
descs->virt = dma_alloc_coherent(to_dev(ioat_chan),
- SZ_2M, &descs->hw, flags);
+ IOAT_CHUNK_SIZE, &descs->hw, flags);
if (!descs->virt) {
int idx;
--
2.25.1
From: Mordechay Goodstein <[email protected]>
[ Upstream commit 42f8a2735cc218b6b372134684d4cd3c1423f123 ]
Every time we call init_cfg driver appends the enabled triggers
to the active triggers while this should be done only once per
driver load.
Signed-off-by: Mordechay Goodstein <[email protected]>
Fixes: 14124b25780d ("iwlwifi: dbg_ini: implement monitor allocation flow")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200930161256.79bd622e604a.Ie0f79d2ea90ca5cdf363f56194ead81b0a2c6202@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
index 641da49b1b86e..48269a4cf8964 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
@@ -1011,6 +1011,9 @@ static void iwl_dbg_tlv_init_cfg(struct iwl_fw_runtime *fwrt)
enum iwl_fw_ini_buffer_location *ini_dest = &fwrt->trans->dbg.ini_dest;
int ret, i;
+ if (*ini_dest != IWL_FW_INI_LOCATION_INVALID)
+ return;
+
IWL_DEBUG_FW(fwrt,
"WRT: Generating active triggers list, domain 0x%x\n",
fwrt->trans->dbg.domains_bitmap);
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 10c75ccb54e4fe548cb16d7ed426d7d709e6ae76 ]
rdma_for_each_block() makes assumptions about how the SGL is constructed
that don't work if the block size is below the page size used to to build
the SGL.
The rules for umem SGL construction require that the SG's all be PAGE_SIZE
aligned and we don't encode the actual byte offset of the VA range inside
the SGL using offset and length. So rdma_for_each_block() has no idea
where the actual starting/ending point is to compute the first/last block
boundary if the starting address should be within a SGL.
Fixing the SGL construction turns out to be really hard, and will be the
subject of other patches. For now block smaller pages.
Fixes: 4a35339958f1 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Leon Romanovsky <[email protected]>
Reviewed-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/umem.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 1173b8cbe92b5..7e765fe211607 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -151,6 +151,12 @@ unsigned long ib_umem_find_best_pgsz(struct ib_umem *umem,
dma_addr_t mask;
int i;
+ /* rdma_for_each_block() has a bug if the page size is smaller than the
+ * page size used to build the umem. For now prevent smaller page sizes
+ * from being returned.
+ */
+ pgsz_bitmap &= GENMASK(BITS_PER_LONG - 1, PAGE_SHIFT);
+
/* At minimum, drivers must support PAGE_SIZE or smaller */
if (WARN_ON(!(pgsz_bitmap & GENMASK(PAGE_SHIFT, 0))))
return 0;
--
2.25.1
From: Matthew Wilcox (Oracle) <[email protected]>
[ Upstream commit a219b856a2b993da234108307be772448f22b0ce ]
If a bitmap needs to be allocated, and then by the time the thread
is scheduled to be run again all the indices which would satisfy the
allocation have been allocated then we would leak the allocation. Almost
impossible to hit in practice, but a trivial fix. Found by Coverity.
Fixes: f32f004cddf8 ("ida: Convert to XArray")
Reported-by: coverity-bot <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/idr.c | 1 +
tools/testing/radix-tree/idr-test.c | 29 +++++++++++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/lib/idr.c b/lib/idr.c
index c2cf2c52bbde5..4d2eef0259d2c 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -470,6 +470,7 @@ int ida_alloc_range(struct ida *ida, unsigned int min, unsigned int max,
goto retry;
nospc:
xas_unlock_irqrestore(&xas, flags);
+ kfree(alloc);
return -ENOSPC;
}
EXPORT_SYMBOL(ida_alloc_range);
diff --git a/tools/testing/radix-tree/idr-test.c b/tools/testing/radix-tree/idr-test.c
index 8995092d541ec..3b796dd5e5772 100644
--- a/tools/testing/radix-tree/idr-test.c
+++ b/tools/testing/radix-tree/idr-test.c
@@ -523,8 +523,27 @@ static void *ida_random_fn(void *arg)
return NULL;
}
+static void *ida_leak_fn(void *arg)
+{
+ struct ida *ida = arg;
+ time_t s = time(NULL);
+ int i, ret;
+
+ rcu_register_thread();
+
+ do for (i = 0; i < 1000; i++) {
+ ret = ida_alloc_range(ida, 128, 128, GFP_KERNEL);
+ if (ret >= 0)
+ ida_free(ida, 128);
+ } while (time(NULL) < s + 2);
+
+ rcu_unregister_thread();
+ return NULL;
+}
+
void ida_thread_tests(void)
{
+ DEFINE_IDA(ida);
pthread_t threads[20];
int i;
@@ -536,6 +555,16 @@ void ida_thread_tests(void)
while (i--)
pthread_join(threads[i], NULL);
+
+ for (i = 0; i < ARRAY_SIZE(threads); i++)
+ if (pthread_create(&threads[i], NULL, ida_leak_fn, &ida)) {
+ perror("creating ida thread");
+ exit(1);
+ }
+
+ while (i--)
+ pthread_join(threads[i], NULL);
+ assert(ida_is_empty(&ida));
}
void ida_tests(void)
--
2.25.1
From: Matthew Wilcox (Oracle) <[email protected]>
[ Upstream commit a6901d4d148dcbad7efb3174afbdf68c995618c2 ]
We can skip most of the initialisation, although spinlocks still
need explicit initialisation as architectures may use a non-zero
value to indicate unlocked. The comment is no longer useful as
attach_page_private() handles the refcount now.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/iomap/buffered-io.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index 897ab9a26a74c..b115e7d47fcec 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -49,16 +49,8 @@ iomap_page_create(struct inode *inode, struct page *page)
if (iop || i_blocksize(inode) == PAGE_SIZE)
return iop;
- iop = kmalloc(sizeof(*iop), GFP_NOFS | __GFP_NOFAIL);
- atomic_set(&iop->read_count, 0);
- atomic_set(&iop->write_count, 0);
+ iop = kzalloc(sizeof(*iop), GFP_NOFS | __GFP_NOFAIL);
spin_lock_init(&iop->uptodate_lock);
- bitmap_zero(iop->uptodate, PAGE_SIZE / SECTOR_SIZE);
-
- /*
- * migrate_page_move_mapping() assumes that pages with private data have
- * their count elevated by 1.
- */
attach_page_private(page, iop);
return iop;
}
--
2.25.1
From: Lorenzo Colitti <[email protected]>
[ Upstream commit 4eea21dc67b0c6ba15ae41b1defa113a680a858e ]
The u_ether driver has a qmult setting that multiplies the
transmit queue length (which by default is 2).
The intent is that it should be enabled at high/super speed, but
because the code does not explicitly check for USB_SUPER_PLUS,
it is disabled at that speed.
Fix this by ensuring that the queue multiplier is enabled for any
wired link at high speed or above. Using >= for USB_SPEED_*
constants seems correct because it is what the gadget_is_xxxspeed
functions do.
The queue multiplier substantially helps performance at higher
speeds. On a direct SuperSpeed Plus link to a Linux laptop,
iperf3 single TCP stream:
Before (qmult=1): 1.3 Gbps
After (qmult=5): 3.2 Gbps
Fixes: 04617db7aa68 ("usb: gadget: add SS descriptors to Ethernet gadget")
Reviewed-by: Maciej Żenczykowski <[email protected]>
Signed-off-by: Lorenzo Colitti <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/u_ether.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index fbe96ef1ac7a4..891e9f7f40d59 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -93,7 +93,7 @@ struct eth_dev {
static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
{
if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
- gadget->speed == USB_SPEED_SUPER))
+ gadget->speed >= USB_SPEED_SUPER))
return qmult * DEFAULT_QLEN;
else
return DEFAULT_QLEN;
--
2.25.1
From: Emmanuel Grumbach <[email protected]>
[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ]
A print in the remain on channel code was too long and caused
a WARNING, split it.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 77916231ff7d3..03b73003b0095 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -3685,9 +3685,12 @@ static int iwl_mvm_send_aux_roc_cmd(struct iwl_mvm *mvm,
tail->apply_time_max_delay = cpu_to_le32(delay);
IWL_DEBUG_TE(mvm,
- "ROC: Requesting to remain on channel %u for %ums (requested = %ums, max_delay = %ums, dtim_interval = %ums)\n",
- channel->hw_value, req_dur, duration, delay,
- dtim_interval);
+ "ROC: Requesting to remain on channel %u for %ums\n",
+ channel->hw_value, req_dur);
+ IWL_DEBUG_TE(mvm,
+ "\t(requested = %ums, max_delay = %ums, dtim_interval = %ums)\n",
+ duration, delay, dtim_interval);
+
/* Set the node address */
memcpy(tail->node_addr, vif->addr, ETH_ALEN);
--
2.25.1
From: Weihang Li <[email protected]>
[ Upstream commit 05df49279f8926178ecb3ce88e61b63104cd6293 ]
The sq_sig_type field should be filled when querying QP, or the users may
get a wrong value.
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Weihang Li <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index d3b983d9f757b..37809a0b50e25 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -4819,6 +4819,7 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr,
}
qp_init_attr->cap = qp_attr->cap;
+ qp_init_attr->sq_sig_type = hr_qp->sq_signal_bits;
out:
mutex_unlock(&hr_qp->mutex);
--
2.25.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 8ce24f8967df2836b4557a23e74dc4bb098249f1 ]
This code should clean up if sm501_init_dev() fails.
Fixes: b6d6454fdb66 ("[PATCH] mfd: SM501 core driver")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/sm501.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index ccd62b9639528..6d2f4a0a901dc 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1415,8 +1415,14 @@ static int sm501_plat_probe(struct platform_device *dev)
goto err_claim;
}
- return sm501_init_dev(sm);
+ ret = sm501_init_dev(sm);
+ if (ret)
+ goto err_unmap;
+
+ return 0;
+ err_unmap:
+ iounmap(sm->regs);
err_claim:
release_mem_region(sm->io_res->start, 0x100);
err_res:
--
2.25.1
From: Dan Murphy <[email protected]>
[ Upstream commit cadab0aefcbadf488b16caf2770430e69f4d7839 ]
snd_soc_update_bits returns a 1 when the bit was successfully updated,
returns a 0 is no update was needed and a negative if the call failed.
The code is currently failing the case of a successful update by just
checking for a non-zero number. Modify these checks and return the error
code only if there is a negative.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/tas2770.c | 52 ++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 28 deletions(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index f6c3c5aaab653..8d88ed5578ddd 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -140,23 +140,18 @@ static int tas2770_dac_event(struct snd_soc_dapm_widget *w,
TAS2770_PWR_CTRL,
TAS2770_PWR_CTRL_MASK,
TAS2770_PWR_CTRL_MUTE);
- if (ret)
- goto end;
break;
case SND_SOC_DAPM_PRE_PMD:
ret = snd_soc_component_update_bits(component,
TAS2770_PWR_CTRL,
TAS2770_PWR_CTRL_MASK,
TAS2770_PWR_CTRL_SHUTDOWN);
- if (ret)
- goto end;
break;
default:
dev_err(tas2770->dev, "Not supported evevt\n");
return -EINVAL;
}
-end:
if (ret < 0)
return ret;
@@ -248,6 +243,9 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
return -EINVAL;
}
+ if (ret < 0)
+ return ret;
+
tas2770->channel_size = bitwidth;
ret = snd_soc_component_update_bits(component,
@@ -256,16 +254,15 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
TAS2770_TDM_CFG_REG5_50_MASK,
TAS2770_TDM_CFG_REG5_VSNS_ENABLE |
tas2770->v_sense_slot);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG6,
TAS2770_TDM_CFG_REG6_ISNS_MASK |
TAS2770_TDM_CFG_REG6_50_MASK,
TAS2770_TDM_CFG_REG6_ISNS_ENABLE |
tas2770->i_sense_slot);
-
-end:
if (ret < 0)
return ret;
@@ -283,36 +280,35 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_48KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
TAS2770_TDM_CFG_REG0_31_44_1_48KHZ);
- if (ret)
- goto end;
break;
case 44100:
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_44_1KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
TAS2770_TDM_CFG_REG0_31_44_1_48KHZ);
- if (ret)
- goto end;
break;
case 96000:
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_48KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
@@ -323,8 +319,9 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_44_1KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
@@ -335,22 +332,22 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_48KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
TAS2770_TDM_CFG_REG0_31_176_4_192KHZ);
- if (ret)
- goto end;
break;
case 17640:
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_44_1KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
@@ -360,7 +357,6 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
ret = -EINVAL;
}
-end:
if (ret < 0)
return ret;
--
2.25.1
From: Miquel Raynal <[email protected]>
[ Upstream commit 40b37136287ba6b34aa2f1f6123f3d6d205dc2f0 ]
Current code expects a single channel to be always used. Fix this
situation by forwarding the number of channels used. Then fix the
derivation of the bdiv clock rate.
Fixes: 96c3bb00239d ("ASoC: tlv320aic32x4: Dynamically Determine Clocking")
Suggested-by: Alexandre Belloni <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/tlv320aic32x4.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index d087f3b20b1d5..50b66cf9ea8f9 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -665,7 +665,7 @@ static int aic32x4_set_processing_blocks(struct snd_soc_component *component,
}
static int aic32x4_setup_clocks(struct snd_soc_component *component,
- unsigned int sample_rate)
+ unsigned int sample_rate, unsigned int channels)
{
u8 aosr;
u16 dosr;
@@ -753,7 +753,9 @@ static int aic32x4_setup_clocks(struct snd_soc_component *component,
dosr);
clk_set_rate(clocks[5].clk,
- sample_rate * 32);
+ sample_rate * 32 *
+ channels);
+
return 0;
}
}
@@ -775,7 +777,8 @@ static int aic32x4_hw_params(struct snd_pcm_substream *substream,
u8 iface1_reg = 0;
u8 dacsetup_reg = 0;
- aic32x4_setup_clocks(component, params_rate(params));
+ aic32x4_setup_clocks(component, params_rate(params),
+ params_channels(params));
switch (params_width(params)) {
case 16:
--
2.25.1
From: Fabrice Gasnier <[email protected]>
[ Upstream commit c537d3457542a398caa1fe58e0976c5f83cf7281 ]
When the ADC is runtime suspended and starting a conversion, the stm32-adc
driver calls pm_runtime_get_sync() that gets cascaded to the parent
(e.g. runtime resume of stm32-adc-core driver). This also kicks the
autosuspend delay (e.g. 2s) of the parent.
Once the ADC is active, calling pm_runtime_get_sync() again (upon a new
capture) won't kick the autosuspend delay for the parent (stm32-adc-core
driver) as already active.
Currently, this makes the stm32-adc-core driver go in suspend state
every 2s when doing slow polling. As an example, doing a capture, e.g.
cat in_voltageY_raw at a 0.2s rate, the auto suspend delay for the parent
isn't refreshed. Once it expires, the parent immediately falls into
runtime suspended state, in between two captures, as soon as the child
driver falls into runtime suspend state:
- e.g. after 2s, + child calls pm_runtime_put_autosuspend() + 100ms
autosuspend delay of the child.
- stm32-adc-core switches off regulators, clocks and so on.
- They get switched on back again 100ms later in this example (at 2.2s).
So, use runtime_idle() callback in stm32-adc-core driver to call
pm_runtime_mark_last_busy() for the parent driver (stm32-adc-core),
to avoid this.
Fixes: 9bdbb1139ca1 ("iio: adc: stm32-adc: add power management support")
Signed-off-by: Fabrice Gasnier <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/stm32-adc-core.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 0e2068ec068b8..358636954619d 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -794,6 +794,13 @@ static int stm32_adc_core_runtime_resume(struct device *dev)
{
return stm32_adc_core_hw_start(dev);
}
+
+static int stm32_adc_core_runtime_idle(struct device *dev)
+{
+ pm_runtime_mark_last_busy(dev);
+
+ return 0;
+}
#endif
static const struct dev_pm_ops stm32_adc_core_pm_ops = {
@@ -801,7 +808,7 @@ static const struct dev_pm_ops stm32_adc_core_pm_ops = {
pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(stm32_adc_core_runtime_suspend,
stm32_adc_core_runtime_resume,
- NULL)
+ stm32_adc_core_runtime_idle)
};
static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
--
2.25.1
From: Linus Walleij <[email protected]>
[ Upstream commit a7920efdd86d8a0d74402dbc80ead03b023294ba ]
There is an off-by-one error in rtl8366rb_is_vlan_valid()
making VLANs 0..4094 valid while it should be 1..4095.
Fix it.
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/rtl8366rb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index fd1977590cb4b..c83b332656a4b 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -1270,7 +1270,7 @@ static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
if (smi->vlan4k_enabled)
max = RTL8366RB_NUM_VIDS - 1;
- if (vlan == 0 || vlan >= max)
+ if (vlan == 0 || vlan > max)
return false;
return true;
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 1c97ca3da0d12e0156a177f48ed3184c3f202002 ]
reg_create() open codes this helper, use the shared code.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/mr.c | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 44683073be0c4..8d975c4d93060 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -1190,29 +1190,16 @@ static struct mlx5_ib_mr *reg_create(struct ib_mr *ibmr, struct ib_pd *pd,
MLX5_SET(create_mkey_in, in, pg_access, !!(pg_cap));
mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
+ set_mkc_access_pd_addr_fields(mkc, access_flags, virt_addr, pd);
MLX5_SET(mkc, mkc, free, !populate);
MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT);
- if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
- MLX5_SET(mkc, mkc, relaxed_ordering_write,
- !!(access_flags & IB_ACCESS_RELAXED_ORDERING));
- if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
- MLX5_SET(mkc, mkc, relaxed_ordering_read,
- !!(access_flags & IB_ACCESS_RELAXED_ORDERING));
- MLX5_SET(mkc, mkc, a, !!(access_flags & IB_ACCESS_REMOTE_ATOMIC));
- MLX5_SET(mkc, mkc, rw, !!(access_flags & IB_ACCESS_REMOTE_WRITE));
- MLX5_SET(mkc, mkc, rr, !!(access_flags & IB_ACCESS_REMOTE_READ));
- MLX5_SET(mkc, mkc, lw, !!(access_flags & IB_ACCESS_LOCAL_WRITE));
- MLX5_SET(mkc, mkc, lr, 1);
MLX5_SET(mkc, mkc, umr_en, 1);
- MLX5_SET64(mkc, mkc, start_addr, virt_addr);
MLX5_SET64(mkc, mkc, len, length);
- MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
MLX5_SET(mkc, mkc, bsf_octword_size, 0);
MLX5_SET(mkc, mkc, translations_octword_size,
get_octo_len(virt_addr, length, page_shift));
MLX5_SET(mkc, mkc, log_page_size, page_shift);
- MLX5_SET(mkc, mkc, qpn, 0xffffff);
if (populate) {
MLX5_SET(create_mkey_in, in, translations_octword_actual_size,
get_octo_len(virt_addr, length, page_shift));
--
2.25.1
From: Yu Kuai <[email protected]>
[ Upstream commit e2eae09939a89e0994f7965ba3c676a5eac8b4b0 ]
if of_find_device_by_node() succeed, qcom_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Acked-by: Rob Clark <[email protected]>
Signed-off-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/qcom_iommu.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/qcom_iommu.c b/drivers/iommu/qcom_iommu.c
index d176df569af8f..78d813bd0dcc8 100644
--- a/drivers/iommu/qcom_iommu.c
+++ b/drivers/iommu/qcom_iommu.c
@@ -578,8 +578,10 @@ static int qcom_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
* index into qcom_iommu->ctxs:
*/
if (WARN_ON(asid < 1) ||
- WARN_ON(asid > qcom_iommu->num_ctxs))
+ WARN_ON(asid > qcom_iommu->num_ctxs)) {
+ put_device(&iommu_pdev->dev);
return -EINVAL;
+ }
if (!dev_iommu_priv_get(dev)) {
dev_iommu_priv_set(dev, qcom_iommu);
@@ -588,8 +590,10 @@ static int qcom_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
* multiple different iommu devices. Multiple context
* banks are ok, but multiple devices are not:
*/
- if (WARN_ON(qcom_iommu != dev_iommu_priv_get(dev)))
+ if (WARN_ON(qcom_iommu != dev_iommu_priv_get(dev))) {
+ put_device(&iommu_pdev->dev);
return -EINVAL;
+ }
}
return iommu_fwspec_add_ids(dev, &asid, 1);
--
2.25.1
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 2ca210112ad91880d2d5a3f85fecc838600afbce ]
Make sure the TLV header and size are consistent before copying from
userspace.
Fixes: c3078f5397046 ('ASoC: SOF: Add Sound Open Firmware KControl support')
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/control.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/sound/soc/sof/control.c b/sound/soc/sof/control.c
index 186eea105bb15..009938d45ddd9 100644
--- a/sound/soc/sof/control.c
+++ b/sound/soc/sof/control.c
@@ -298,6 +298,10 @@ int snd_sof_bytes_ext_put(struct snd_kcontrol *kcontrol,
const struct snd_ctl_tlv __user *tlvd =
(const struct snd_ctl_tlv __user *)binary_data;
+ /* make sure we have at least a header */
+ if (size < sizeof(struct snd_ctl_tlv))
+ return -EINVAL;
+
/*
* The beginning of bytes data contains a header from where
* the length (as bytes) is needed to know the correct copy
@@ -306,6 +310,13 @@ int snd_sof_bytes_ext_put(struct snd_kcontrol *kcontrol,
if (copy_from_user(&header, tlvd, sizeof(const struct snd_ctl_tlv)))
return -EFAULT;
+ /* make sure TLV info is consistent */
+ if (header.length + sizeof(struct snd_ctl_tlv) > size) {
+ dev_err_ratelimited(scomp->dev, "error: inconsistent TLV, data %d + header %zu > %d\n",
+ header.length, sizeof(struct snd_ctl_tlv), size);
+ return -EINVAL;
+ }
+
/* be->max is coming from topology */
if (header.length > be->max) {
dev_err_ratelimited(scomp->dev, "error: Bytes data size %d exceeds max %d.\n",
--
2.25.1
From: Vignesh Raghavendra <[email protected]>
[ Upstream commit aca31ce96814c84d1a41aaa109c15abe61005af7 ]
Setting up of direct mapping should be done with flash node's IO
address space and not with controller's IO region.
Fixes: b6fe8bc67d2d3 ("mtd: hyperbus: move direct mapping setup to AM654 HBMC driver")
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/hyperbus/hbmc-am654.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c
index f350a0809f880..a808fa28cd9a1 100644
--- a/drivers/mtd/hyperbus/hbmc-am654.c
+++ b/drivers/mtd/hyperbus/hbmc-am654.c
@@ -70,7 +70,8 @@ static int am654_hbmc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
- ret = of_address_to_resource(np, 0, &res);
+ priv->hbdev.np = of_get_next_child(np, NULL);
+ ret = of_address_to_resource(priv->hbdev.np, 0, &res);
if (ret)
return ret;
@@ -103,7 +104,6 @@ static int am654_hbmc_probe(struct platform_device *pdev)
priv->ctlr.dev = dev;
priv->ctlr.ops = &am654_hbmc_ops;
priv->hbdev.ctlr = &priv->ctlr;
- priv->hbdev.np = of_get_next_child(dev->of_node, NULL);
ret = hyperbus_register_device(&priv->hbdev);
if (ret) {
dev_err(dev, "failed to register controller\n");
--
2.25.1
From: Rajkumar Manoharan <[email protected]>
[ Upstream commit 6c8b6e4a5f745ec49286ac0a3f1d591a34818f82 ]
The SRG min and max offset won't present when SRG Information Present of
SR control field of Spatial Reuse Parameter Set element set to 0. Per
spec. IEEE802.11ax D7.0, SRG OBSS PD Min Offset ≤ SRG OBSS PD Max
Offset. Hence fix the constrain check to allow same values in both
offset and also call appropriate nla_get function to read the values.
Fixes: 796e90f42b7e ("cfg80211: add support for parsing OBBS_PD attributes")
Signed-off-by: Rajkumar Manoharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 4d7b255067225..7cbb94b4d4917 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4683,16 +4683,14 @@ static int nl80211_parse_he_obss_pd(struct nlattr *attrs,
if (err)
return err;
- if (!tb[NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET] ||
- !tb[NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET])
- return -EINVAL;
-
- he_obss_pd->min_offset =
- nla_get_u32(tb[NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET]);
- he_obss_pd->max_offset =
- nla_get_u32(tb[NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET]);
-
- if (he_obss_pd->min_offset >= he_obss_pd->max_offset)
+ if (tb[NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET])
+ he_obss_pd->min_offset =
+ nla_get_u8(tb[NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET]);
+ if (tb[NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET])
+ he_obss_pd->max_offset =
+ nla_get_u8(tb[NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET]);
+
+ if (he_obss_pd->min_offset > he_obss_pd->max_offset)
return -EINVAL;
he_obss_pd->enable = true;
--
2.25.1
From: Christophe Kerello <[email protected]>
[ Upstream commit ab16f54ef3cdb6bbc06a36f636a89e6db8a6cea3 ]
This patch solves following static checker warning:
drivers/mtd/nand/raw/stm32_fmc2_nand.c:350 stm32_fmc2_nfc_select_chip()
error: buffer overflow 'nfc->data_phys_addr' 2 <= 2
The CS value can only be 0 or 1.
Signed-off-by: Christophe Kerello <[email protected]>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 65c9d17b25a3c..dce6d7a10a364 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1791,7 +1791,7 @@ static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc,
return ret;
}
- if (cs > FMC2_MAX_CE) {
+ if (cs >= FMC2_MAX_CE) {
dev_err(nfc->dev, "invalid reg value: %d\n", cs);
return -EINVAL;
}
--
2.25.1
From: Dan Murphy <[email protected]>
[ Upstream commit 4b8ab8a7761fe2ba1c4e741703a848cb8f390f79 ]
The devicetree binding indicates that the ti,asi-format, ti,imon-slot-no
and ti,vmon-slot-no are not required but the driver requires them or it
fails to probe. Honor the binding and allow these entries to be optional
and set the corresponding values to the default values for each as defined
in the data sheet.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/tas2770.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 4d67b1c160380..f6c3c5aaab653 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -707,29 +707,28 @@ static int tas2770_parse_dt(struct device *dev, struct tas2770_priv *tas2770)
rc = fwnode_property_read_u32(dev->fwnode, "ti,asi-format",
&tas2770->asi_format);
if (rc) {
- dev_err(tas2770->dev, "Looking up %s property failed %d\n",
- "ti,asi-format", rc);
- goto end;
+ dev_info(tas2770->dev, "Property %s is missing setting default slot\n",
+ "ti,asi-format");
+ tas2770->asi_format = 0;
}
rc = fwnode_property_read_u32(dev->fwnode, "ti,imon-slot-no",
&tas2770->i_sense_slot);
if (rc) {
- dev_err(tas2770->dev, "Looking up %s property failed %d\n",
- "ti,imon-slot-no", rc);
- goto end;
+ dev_info(tas2770->dev, "Property %s is missing setting default slot\n",
+ "ti,imon-slot-no");
+ tas2770->i_sense_slot = 0;
}
rc = fwnode_property_read_u32(dev->fwnode, "ti,vmon-slot-no",
&tas2770->v_sense_slot);
if (rc) {
- dev_err(tas2770->dev, "Looking up %s property failed %d\n",
- "ti,vmon-slot-no", rc);
- goto end;
+ dev_info(tas2770->dev, "Property %s is missing setting default slot\n",
+ "ti,vmon-slot-no");
+ tas2770->v_sense_slot = 2;
}
-end:
- return rc;
+ return 0;
}
static int tas2770_i2c_probe(struct i2c_client *client,
--
2.25.1
From: Evgeny Novikov <[email protected]>
[ Upstream commit cb7dc3178a9862614b1e7567d77f4679f027a074 ]
vf610_nfc_probe() does not invoke clk_disable_unprepare() on one error
handling path. The patch fixes that.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 6f0ce4dfc5a3 ("mtd: rawnand: vf610: Avoid a potential NULL pointer dereference")
Signed-off-by: Evgeny Novikov <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/vf610_nfc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index 7248c59011836..fcca45e2abe20 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -852,8 +852,10 @@ static int vf610_nfc_probe(struct platform_device *pdev)
}
of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
- if (!of_id)
- return -ENODEV;
+ if (!of_id) {
+ err = -ENODEV;
+ goto err_disable_clk;
+ }
nfc->variant = (enum vf610_nfc_variant)of_id->data;
--
2.25.1
From: Leon Romanovsky <[email protected]>
[ Upstream commit a4947e84f23474803b62a2759b5808147e4e15f9 ]
The various array_size functions use SIZE_MAX define, but missed limits.h
causes to failure to compile code that needs overflow.h.
In file included from drivers/infiniband/core/uverbs_std_types_device.c:6:
./include/linux/overflow.h: In function 'array_size':
./include/linux/overflow.h:258:10: error: 'SIZE_MAX' undeclared (first use in this function)
258 | return SIZE_MAX;
| ^~~~~~~~
Fixes: 610b15c50e86 ("overflow.h: Add allocation size calculation helpers")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/overflow.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/overflow.h b/include/linux/overflow.h
index 93fcef105061b..ff3c48f0abc5b 100644
--- a/include/linux/overflow.h
+++ b/include/linux/overflow.h
@@ -3,6 +3,7 @@
#define __LINUX_OVERFLOW_H
#include <linux/compiler.h>
+#include <linux/limits.h>
/*
* In the fallback code below, we need to compute the minimum and
--
2.25.1
From: Hauke Mehrtens <[email protected]>
[ Upstream commit 6387ad9caf8f09747a8569e5876086b72ee9382c ]
The datasheet only lists one dummy byte in the 0xEH operation for the
following chips:
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG
Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
Signed-off-by: Hauke Mehrtens <[email protected]>
Tested-by: Chuanhong Guo <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/spi/gigadevice.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index d219c970042a2..679d3c43e15aa 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -21,7 +21,7 @@
#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR (7 << 4)
static SPINAND_OP_VARIANTS(read_cache_variants,
- SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
@@ -29,7 +29,7 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
static SPINAND_OP_VARIANTS(read_cache_variants_f,
- SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
--
2.25.1
From: Athira Rajeev <[email protected]>
[ Upstream commit 3b6c3adbb2fa42749c3d38cfc4d4d0b7e096bb7b ]
PMU counter support functions enforces event constraints for group of
events to check if all events in a group can be monitored. Incase of
event codes using PMC5 and PMC6 ( 500fa and 600f4 respectively ), not
all constraints are applicable, say the threshold or sample bits. But
current code includes pmc5 and pmc6 in some group constraints (like
IC_DC Qualifier bits) which is actually not applicable and hence
results in those events not getting counted when scheduled along with
group of other events. Patch fixes this by excluding PMC5/6 from
constraints which are not relevant for it.
Fixes: 7ffd948 ("powerpc/perf: factor out power8 pmu functions")
Signed-off-by: Athira Rajeev <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/perf/isa207-common.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index 4c86da5eb28ab..0b5c8f4fbdbfd 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -269,6 +269,15 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
mask |= CNST_PMC_MASK(pmc);
value |= CNST_PMC_VAL(pmc);
+
+ /*
+ * PMC5 and PMC6 are used to count cycles and instructions and
+ * they do not support most of the constraint bits. Add a check
+ * to exclude PMC5/6 from most of the constraints except for
+ * EBB/BHRB.
+ */
+ if (pmc >= 5)
+ goto ebb_bhrb;
}
if (pmc <= 4) {
@@ -335,6 +344,7 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
}
}
+ebb_bhrb:
if (!pmc && ebb)
/* EBB events must specify the PMC */
return -1;
--
2.25.1
From: Hauke Mehrtens <[email protected]>
[ Upstream commit aea7687e77bebce5b67fab9d03347bd8df7933c7 ]
The following GigaDevice chips have the QE BIT in the feature flags, I
checked the datasheets, but did not try this.
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG
The Quad operations like 0xEB mention that the QE bit has to be set.
Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
Signed-off-by: Hauke Mehrtens <[email protected]>
Tested-by: Chuanhong Guo <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/spi/gigadevice.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index 679d3c43e15aa..0b7667e60780f 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -202,7 +202,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
&update_cache_variants),
- 0,
+ SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
gd5fxgq4xa_ecc_get_status)),
SPINAND_INFO("GD5F2GQ4xA",
@@ -212,7 +212,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
&update_cache_variants),
- 0,
+ SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
gd5fxgq4xa_ecc_get_status)),
SPINAND_INFO("GD5F4GQ4xA",
@@ -222,7 +222,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
&update_cache_variants),
- 0,
+ SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
gd5fxgq4xa_ecc_get_status)),
SPINAND_INFO("GD5F1GQ4UExxG",
@@ -232,7 +232,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
&update_cache_variants),
- 0,
+ SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
gd5fxgq4uexxg_ecc_get_status)),
SPINAND_INFO("GD5F1GQ4UFxxG",
@@ -242,7 +242,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
&write_cache_variants,
&update_cache_variants),
- 0,
+ SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
gd5fxgq4ufxxg_ecc_get_status)),
};
--
2.25.1
From: Namhyung Kim <[email protected]>
[ Upstream commit bef69bd7cfc363ab94b84ea29102f3e913ed3c6c ]
It was reported that 'perf stat' crashed when using with armv8_pmu (CPU)
events with the task mode. As 'perf stat' uses an empty cpu map for
task mode but armv8_pmu has its own cpu mask, it has confused which map
it should use when accessing file descriptors and this causes segfaults:
(gdb) bt
#0 0x0000000000603fc8 in perf_evsel__close_fd_cpu (evsel=<optimized out>,
cpu=<optimized out>) at evsel.c:122
#1 perf_evsel__close_cpu (evsel=evsel@entry=0x716e950, cpu=7) at evsel.c:156
#2 0x00000000004d4718 in evlist__close (evlist=0x70a7cb0) at util/evlist.c:1242
#3 0x0000000000453404 in __run_perf_stat (argc=3, argc@entry=1, argv=0x30,
argv@entry=0xfffffaea2f90, run_idx=119, run_idx@entry=1701998435)
at builtin-stat.c:929
#4 0x0000000000455058 in run_perf_stat (run_idx=1701998435, argv=0xfffffaea2f90,
argc=1) at builtin-stat.c:947
#5 cmd_stat (argc=1, argv=0xfffffaea2f90) at builtin-stat.c:2357
#6 0x00000000004bb888 in run_builtin (p=p@entry=0x9764b8 <commands+288>,
argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:312
#7 0x00000000004bbb54 in handle_internal_command (argc=argc@entry=4,
argv=argv@entry=0xfffffaea2f90) at perf.c:364
#8 0x0000000000435378 in run_argv (argcp=<synthetic pointer>,
argv=<synthetic pointer>) at perf.c:408
#9 main (argc=4, argv=0xfffffaea2f90) at perf.c:538
To fix this, I simply used the given cpu map unless the evsel actually
is not a system-wide event (like uncore events).
Fixes: 7736627b865d ("perf stat: Use affinity for closing file descriptors")
Reported-by: Wei Li <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Barry Song <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/perf/evlist.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/lib/perf/evlist.c b/tools/lib/perf/evlist.c
index 6a875a0f01bb0..233592c5a52c7 100644
--- a/tools/lib/perf/evlist.c
+++ b/tools/lib/perf/evlist.c
@@ -45,6 +45,9 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,
if (!evsel->own_cpus || evlist->has_user_cpus) {
perf_cpu_map__put(evsel->cpus);
evsel->cpus = perf_cpu_map__get(evlist->cpus);
+ } else if (!evsel->system_wide && perf_cpu_map__empty(evlist->cpus)) {
+ perf_cpu_map__put(evsel->cpus);
+ evsel->cpus = perf_cpu_map__get(evlist->cpus);
} else if (evsel->cpus != evsel->own_cpus) {
perf_cpu_map__put(evsel->cpus);
evsel->cpus = perf_cpu_map__get(evsel->own_cpus);
--
2.25.1
From: Daniel Thompson <[email protected]>
[ Upstream commit d081a6e353168f15e63eb9e9334757f20343319f ]
Currently using forward search doesn't handle multi-line strings correctly.
The search routine replaces line breaks with \0 during the search and, for
regular searches ("help | grep Common\n"), there is code after the line
has been discarded or printed to replace the break character.
However during a pager search ("help\n" followed by "/Common\n") when the
string is matched we will immediately return to normal output and the code
that should restore the \n becomes unreachable. Fix this by restoring the
replaced character when we disable the search mode and update the comment
accordingly.
Fixes: fb6daa7520f9d ("kdb: Provide forward search at more prompt")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Daniel Thompson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/debug/kdb/kdb_io.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 683a799618ade..bc827bd547c81 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -706,12 +706,16 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap)
size_avail = sizeof(kdb_buffer) - len;
goto kdb_print_out;
}
- if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH)
+ if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH) {
/*
* This was a interactive search (using '/' at more
- * prompt) and it has completed. Clear the flag.
+ * prompt) and it has completed. Replace the \0 with
+ * its original value to ensure multi-line strings
+ * are handled properly, and return to normal mode.
*/
+ *cphold = replaced_byte;
kdb_grepping_flag = 0;
+ }
/*
* at this point the string is a full line and
* should be printed, up to the null.
--
2.25.1
From: Sai Prakash Ranjan <[email protected]>
[ Upstream commit 3477326277451000bc667dfcc4fd0774c039184c ]
In commit f188b5e76aae ("coresight: etm4x: Save/restore state
across CPU low power states"), mistakenly TRCVMIDCCTLR1 register
value was saved in trcvmidcctlr0 state variable which is used to
store TRCVMIDCCTLR0 register value in etm4x_cpu_save() and then
same value is written back to both TRCVMIDCCTLR0 and TRCVMIDCCTLR1
in etm4x_cpu_restore(). There is already a trcvmidcctlr1 state
variable available for TRCVMIDCCTLR1, so use it.
Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states")
Reviewed-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Sai Prakash Ranjan <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index d6395aeffd99d..d4e74b03c1e0f 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -1233,7 +1233,7 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
state->trccidcctlr1 = readl(drvdata->base + TRCCIDCCTLR1);
state->trcvmidcctlr0 = readl(drvdata->base + TRCVMIDCCTLR0);
- state->trcvmidcctlr0 = readl(drvdata->base + TRCVMIDCCTLR1);
+ state->trcvmidcctlr1 = readl(drvdata->base + TRCVMIDCCTLR1);
state->trcclaimset = readl(drvdata->base + TRCCLAIMCLR);
@@ -1343,7 +1343,7 @@ static void etm4_cpu_restore(struct etmv4_drvdata *drvdata)
writel_relaxed(state->trccidcctlr1, drvdata->base + TRCCIDCCTLR1);
writel_relaxed(state->trcvmidcctlr0, drvdata->base + TRCVMIDCCTLR0);
- writel_relaxed(state->trcvmidcctlr0, drvdata->base + TRCVMIDCCTLR1);
+ writel_relaxed(state->trcvmidcctlr1, drvdata->base + TRCVMIDCCTLR1);
writel_relaxed(state->trcclaimset, drvdata->base + TRCCLAIMSET);
--
2.25.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit 2b48e96be2f9f7151197fd25dc41487054bc6f5b ]
Replayed interrupts get an "artificial" struct pt_regs constructed to
pass to interrupt handler functions. This did not get the softe field
set correctly, it's as though the interrupt has hit while irqs are
disabled. It should be IRQS_ENABLED.
This is possibly harmless, asynchronous handlers should not be testing
if irqs were disabled, but it might be possible for example some code
is shared with synchronous or NMI handlers, and it makes more sense if
debug output looks at this.
Fixes: 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C")
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/irq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 297ee79febc6c..3a22281a8264e 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -214,7 +214,7 @@ void replay_soft_interrupts(void)
struct pt_regs regs;
ppc_save_regs(®s);
- regs.softe = IRQS_ALL_DISABLED;
+ regs.softe = IRQS_ENABLED;
again:
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 5eb29f0d13a66502b91954597270003c90fb66c5 ]
Any mkey that is not enabled and assigned to userspace should have the PD
set to a kernel owned PD.
When cache entries are created for the first time the PDN is set to 0,
which is probably a kernel PD, but be explicit.
When a MR is registered using the hybrid reg_create with UMR xlt & enable
the disabled mkey is pointing at the user PD, keep it pointing at the
kernel until a UMR enables it and sets the user PD.
Fixes: 9ec4483a3f0f ("IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/mr.c | 51 +++++++++++++++++----------------
1 file changed, 26 insertions(+), 25 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 8d975c4d93060..85c9a1ffdbb64 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -50,6 +50,29 @@ enum {
static void
create_mkey_callback(int status, struct mlx5_async_work *context);
+static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
+ struct ib_pd *pd)
+{
+ struct mlx5_ib_dev *dev = to_mdev(pd->device);
+
+ MLX5_SET(mkc, mkc, a, !!(acc & IB_ACCESS_REMOTE_ATOMIC));
+ MLX5_SET(mkc, mkc, rw, !!(acc & IB_ACCESS_REMOTE_WRITE));
+ MLX5_SET(mkc, mkc, rr, !!(acc & IB_ACCESS_REMOTE_READ));
+ MLX5_SET(mkc, mkc, lw, !!(acc & IB_ACCESS_LOCAL_WRITE));
+ MLX5_SET(mkc, mkc, lr, 1);
+
+ if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
+ MLX5_SET(mkc, mkc, relaxed_ordering_write,
+ !!(acc & IB_ACCESS_RELAXED_ORDERING));
+ if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
+ MLX5_SET(mkc, mkc, relaxed_ordering_read,
+ !!(acc & IB_ACCESS_RELAXED_ORDERING));
+
+ MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
+ MLX5_SET(mkc, mkc, qpn, 0xffffff);
+ MLX5_SET64(mkc, mkc, start_addr, start_addr);
+}
+
static void
assign_mkey_variant(struct mlx5_ib_dev *dev, struct mlx5_core_mkey *mkey,
u32 *in)
@@ -152,12 +175,12 @@ static struct mlx5_ib_mr *alloc_cache_mr(struct mlx5_cache_ent *ent, void *mkc)
mr->cache_ent = ent;
mr->dev = ent->dev;
+ set_mkc_access_pd_addr_fields(mkc, 0, 0, ent->dev->umrc.pd);
MLX5_SET(mkc, mkc, free, 1);
MLX5_SET(mkc, mkc, umr_en, 1);
MLX5_SET(mkc, mkc, access_mode_1_0, ent->access_mode & 0x3);
MLX5_SET(mkc, mkc, access_mode_4_2, (ent->access_mode >> 2) & 0x7);
- MLX5_SET(mkc, mkc, qpn, 0xffffff);
MLX5_SET(mkc, mkc, translations_octword_size, ent->xlt);
MLX5_SET(mkc, mkc, log_page_size, ent->page);
return mr;
@@ -774,29 +797,6 @@ int mlx5_mr_cache_cleanup(struct mlx5_ib_dev *dev)
return 0;
}
-static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
- struct ib_pd *pd)
-{
- struct mlx5_ib_dev *dev = to_mdev(pd->device);
-
- MLX5_SET(mkc, mkc, a, !!(acc & IB_ACCESS_REMOTE_ATOMIC));
- MLX5_SET(mkc, mkc, rw, !!(acc & IB_ACCESS_REMOTE_WRITE));
- MLX5_SET(mkc, mkc, rr, !!(acc & IB_ACCESS_REMOTE_READ));
- MLX5_SET(mkc, mkc, lw, !!(acc & IB_ACCESS_LOCAL_WRITE));
- MLX5_SET(mkc, mkc, lr, 1);
-
- if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
- MLX5_SET(mkc, mkc, relaxed_ordering_write,
- !!(acc & IB_ACCESS_RELAXED_ORDERING));
- if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
- MLX5_SET(mkc, mkc, relaxed_ordering_read,
- !!(acc & IB_ACCESS_RELAXED_ORDERING));
-
- MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
- MLX5_SET(mkc, mkc, qpn, 0xffffff);
- MLX5_SET64(mkc, mkc, start_addr, start_addr);
-}
-
struct ib_mr *mlx5_ib_get_dma_mr(struct ib_pd *pd, int acc)
{
struct mlx5_ib_dev *dev = to_mdev(pd->device);
@@ -1190,7 +1190,8 @@ static struct mlx5_ib_mr *reg_create(struct ib_mr *ibmr, struct ib_pd *pd,
MLX5_SET(create_mkey_in, in, pg_access, !!(pg_cap));
mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
- set_mkc_access_pd_addr_fields(mkc, access_flags, virt_addr, pd);
+ set_mkc_access_pd_addr_fields(mkc, access_flags, virt_addr,
+ populate ? pd : dev->umrc.pd);
MLX5_SET(mkc, mkc, free, !populate);
MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT);
MLX5_SET(mkc, mkc, umr_en, 1);
--
2.25.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit 903fd31d3212ab72d564c68f6cfb5d04db68773e ]
Prior to commit 3282a3da25bd ("powerpc/64: Implement soft interrupt
replay in C"), replayed interrupts returned by the regular interrupt
exit code, which performs preemption in case an interrupt had set
need_resched.
This logic was missed by the conversion. Adding preempt_disable/enable
around the interrupt replay and final irq enable will reschedule if
needed.
Fixes: 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C")
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/irq.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 05b1cc0e009e4..297ee79febc6c 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -368,6 +368,12 @@ notrace void arch_local_irq_restore(unsigned long mask)
}
}
+ /*
+ * Disable preempt here, so that the below preempt_enable will
+ * perform resched if required (a replayed interrupt may set
+ * need_resched).
+ */
+ preempt_disable();
irq_soft_mask_set(IRQS_ALL_DISABLED);
trace_hardirqs_off();
@@ -377,6 +383,7 @@ notrace void arch_local_irq_restore(unsigned long mask)
trace_hardirqs_on();
irq_soft_mask_set(IRQS_ENABLED);
__hard_irq_enable();
+ preempt_enable();
}
EXPORT_SYMBOL(arch_local_irq_restore);
--
2.25.1
From: Jing Xiangfeng <[email protected]>
[ Upstream commit abea14bfdebbe9bd02f2ad24a1f3a878ed21c8f0 ]
Fix to return negative error code -ENOMEM from the error handling
case instead of 0.
Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP")
Signed-off-by: Jing Xiangfeng <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://lore.kernel.org/linux-i3c/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i3c/master/i3c-master-cdns.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/i3c/master/i3c-master-cdns.c b/drivers/i3c/master/i3c-master-cdns.c
index 3fee8bd7fe20b..3f2226928fe05 100644
--- a/drivers/i3c/master/i3c-master-cdns.c
+++ b/drivers/i3c/master/i3c-master-cdns.c
@@ -1635,8 +1635,10 @@ static int cdns_i3c_master_probe(struct platform_device *pdev)
master->ibi.slots = devm_kcalloc(&pdev->dev, master->ibi.num_slots,
sizeof(*master->ibi.slots),
GFP_KERNEL);
- if (!master->ibi.slots)
+ if (!master->ibi.slots) {
+ ret = -ENOMEM;
goto err_disable_sysclk;
+ }
writel(IBIR_THR(1), master->regs + CMD_IBI_THR_CTRL);
writel(MST_INT_IBIR_THR, master->regs + MST_IER);
--
2.25.1
From: Tiezhu Yang <[email protected]>
[ Upstream commit e4e721fe4ccb504a29d1e8d4047667557281d932 ]
Use GFP_ATOMIC instead of GFP_KERNEL under spin lock to fix possible
sleep-in-atomic-context bugs.
Fixes: 9807019a62dc ("um: Loadable BPF "Firmware" for vector drivers")
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/drivers/vector_kern.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/um/drivers/vector_kern.c b/arch/um/drivers/vector_kern.c
index 8735c468230a5..555203e3e7b45 100644
--- a/arch/um/drivers/vector_kern.c
+++ b/arch/um/drivers/vector_kern.c
@@ -1403,7 +1403,7 @@ static int vector_net_load_bpf_flash(struct net_device *dev,
kfree(vp->bpf->filter);
vp->bpf->filter = NULL;
} else {
- vp->bpf = kmalloc(sizeof(struct sock_fprog), GFP_KERNEL);
+ vp->bpf = kmalloc(sizeof(struct sock_fprog), GFP_ATOMIC);
if (vp->bpf == NULL) {
netdev_err(dev, "failed to allocate memory for firmware\n");
goto flash_fail;
@@ -1415,7 +1415,7 @@ static int vector_net_load_bpf_flash(struct net_device *dev,
if (request_firmware(&fw, efl->data, &vdevice->pdev.dev))
goto flash_fail;
- vp->bpf->filter = kmemdup(fw->data, fw->size, GFP_KERNEL);
+ vp->bpf->filter = kmemdup(fw->data, fw->size, GFP_ATOMIC);
if (!vp->bpf->filter)
goto free_buffer;
--
2.25.1
From: Matthew Wilcox (Oracle) <[email protected]>
[ Upstream commit 50b7d85680086126d7bd91dae81d57d4cb1ab6b7 ]
ramfs needs to check that pages are both physically contiguous and
contiguous in the file. If the page cache happens to have, eg, page A for
index 0 of the file, no page for index 1, and page A+1 for index 2, then
an mmap of the first two pages of the file will succeed when it should
fail.
Fixes: 642fb4d1f1dd ("[PATCH] NOMMU: Provide shared-writable mmap support on ramfs")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: David Howells <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ramfs/file-nommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 4146954549560..355523f4a4bf3 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -224,7 +224,7 @@ static unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
if (!pages)
goto out_free;
- nr = find_get_pages(inode->i_mapping, &pgoff, lpages, pages);
+ nr = find_get_pages_contig(inode->i_mapping, pgoff, lpages, pages);
if (nr != lpages)
goto out_free_pages; /* leave if some pages were missing */
--
2.25.1
From: Kamal Heib <[email protected]>
[ Upstream commit 5ce2dced8e95e76ff7439863a118a053a7fc6f91 ]
Report the "ipoib pkey", "mode" and "umcast" netlink attributes for every
IPoiB interface type, not just children created with 'ip link add'.
After setting the rtnl_link_ops for the parent interface, implement the
dellink() callback to block users from trying to remove it.
Fixes: 862096a8bbf8 ("IB/ipoib: Add more rtnl_link_ops callbacks")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 ++
drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 11 +++++++++++
drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 2 ++
3 files changed, 15 insertions(+)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index ef60e8e4ae67b..7c0bb2642d232 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -2470,6 +2470,8 @@ static struct net_device *ipoib_add_port(const char *format,
/* call event handler to ensure pkey in sync */
queue_work(ipoib_workqueue, &priv->flush_heavy);
+ ndev->rtnl_link_ops = ipoib_get_link_ops();
+
result = register_netdev(ndev);
if (result) {
pr_warn("%s: couldn't register ipoib port %d; error %d\n",
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
index 38c984d16996d..d5a90a66b45cf 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
@@ -144,6 +144,16 @@ static int ipoib_new_child_link(struct net *src_net, struct net_device *dev,
return 0;
}
+static void ipoib_del_child_link(struct net_device *dev, struct list_head *head)
+{
+ struct ipoib_dev_priv *priv = ipoib_priv(dev);
+
+ if (!priv->parent)
+ return;
+
+ unregister_netdevice_queue(dev, head);
+}
+
static size_t ipoib_get_size(const struct net_device *dev)
{
return nla_total_size(2) + /* IFLA_IPOIB_PKEY */
@@ -158,6 +168,7 @@ static struct rtnl_link_ops ipoib_link_ops __read_mostly = {
.priv_size = sizeof(struct ipoib_dev_priv),
.setup = ipoib_setup_common,
.newlink = ipoib_new_child_link,
+ .dellink = ipoib_del_child_link,
.changelink = ipoib_changelink,
.get_size = ipoib_get_size,
.fill_info = ipoib_fill_info,
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index 30865605e0980..4c50a87ed7cc2 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -195,6 +195,8 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
}
priv = ipoib_priv(ndev);
+ ndev->rtnl_link_ops = ipoib_get_link_ops();
+
result = __ipoib_vlan_add(ppriv, priv, pkey, IPOIB_LEGACY_CHILD);
if (result && ndev->reg_state == NETREG_UNINITIALIZED)
--
2.25.1
From: Kajol Jain <[email protected]>
[ Upstream commit 0f9866f7e85765bbda86666df56c92f377c3bc10 ]
Commit 9e9f60108423f ("powerpc/perf/{hv-gpci, hv-common}: generate
requests with counters annotated") adds a framework for defining
gpci counters.
In this patch, they adds starting_index value as '0xffffffffffffffff'.
which is wrong as starting_index is of size 32 bits.
Because of this, incase we try to run hv-gpci event we get error.
In power9 machine:
command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
-C 0 -I 1000
event syntax error: '..bie_count_and_time_tlbie_instructions_issued/'
\___ value too big for format, maximum is 4294967295
This patch fix this issue and changes starting_index value to '0xffffffff'
After this patch:
command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000
1.000085786 1,024 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
2.000287818 1,024 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
2.439113909 17,408 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
Fixes: 9e9f60108423 ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated")
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/perf/hv-gpci-requests.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/perf/hv-gpci-requests.h b/arch/powerpc/perf/hv-gpci-requests.h
index e608f9db12ddc..8965b4463d433 100644
--- a/arch/powerpc/perf/hv-gpci-requests.h
+++ b/arch/powerpc/perf/hv-gpci-requests.h
@@ -95,7 +95,7 @@ REQUEST(__field(0, 8, partition_id)
#define REQUEST_NAME system_performance_capabilities
#define REQUEST_NUM 0x40
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 1, perf_collect_privileged)
__field(0x1, 1, capability_mask)
@@ -223,7 +223,7 @@ REQUEST(__field(0, 2, partition_id)
#define REQUEST_NAME system_hypervisor_times
#define REQUEST_NUM 0xF0
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
#include I(REQUEST_BEGIN)
REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors)
__count(0x8, 8, time_spent_processing_virtual_processor_timers)
@@ -234,7 +234,7 @@ REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors)
#define REQUEST_NAME system_tlbie_count_and_time
#define REQUEST_NUM 0xF4
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
#include I(REQUEST_BEGIN)
REQUEST(__count(0, 8, tlbie_instructions_issued)
/*
--
2.25.1
From: Dmitry Torokhov <[email protected]>
[ Upstream commit 505f394fa239cecb76d916aa858f87ed7ea7fde4 ]
With commit 4f3882177240 hid-input started clearing of "ignored" usages
to avoid using garbage that might have been left in them. However
"battery strength" usages should not be ignored, as we do want to
use them.
Fixes: 4f3882177240 ("HID: hid-input: clear unmapped usages")
Reported-by: Kenneth Albanowski <[email protected]>
Tested-by: Kenneth Albanowski <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-input.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index e3d475f4baf66..b2bff932c524f 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -797,7 +797,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x3b: /* Battery Strength */
hidinput_setup_battery(device, HID_INPUT_REPORT, field);
usage->type = EV_PWR;
- goto ignore;
+ return;
case 0x3c: /* Invert */
map_key_clear(BTN_TOOL_RUBBER);
@@ -1059,7 +1059,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case HID_DC_BATTERYSTRENGTH:
hidinput_setup_battery(device, HID_INPUT_REPORT, field);
usage->type = EV_PWR;
- goto ignore;
+ return;
}
goto unknown;
--
2.25.1
From: Vaibhav Jain <[email protected]>
[ Upstream commit 13135b461cf205941308984bd3271ec7d403dc40 ]
Add NVDIMM_FAMILY_PAPR to the list of valid 'dimm_family_mask'
acceptable by papr_scm. This is needed as since commit
92fe2aa859f5 ("libnvdimm: Validate command family indices") libnvdimm
performs a validation of 'nd_cmd_pkg.nd_family' received as part of
ND_CMD_CALL processing to ensure only known command families can use
the general ND_CMD_CALL pass-through functionality.
Without this change the ND_CMD_CALL pass-through targeting
NVDIMM_FAMILY_PAPR error out with -EINVAL.
Fixes: 92fe2aa859f5 ("libnvdimm: Validate command family indices")
Signed-off-by: Vaibhav Jain <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/papr_scm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index 9c569078a09fd..6c2c66450dac8 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -702,6 +702,9 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
p->bus_desc.of_node = p->pdev->dev.of_node;
p->bus_desc.provider_name = kstrdup(p->pdev->name, GFP_KERNEL);
+ /* Set the dimm command family mask to accept PDSMs */
+ set_bit(NVDIMM_FAMILY_PAPR, &p->bus_desc.dimm_family_mask);
+
if (!p->bus_desc.provider_name)
return -ENOMEM;
--
2.25.1
From: Nicolas Boichat <[email protected]>
[ Upstream commit 231331b2dbd71487159a0400d9ffd967eb0d0e08 ]
If rpmsg_register_device fails, it will call
mtk_rpmsg_release_device which already frees mdev.
Fixes: 7017996951fd ("rpmsg: add rpmsg support for mt8183 SCP.")
Signed-off-by: Nicolas Boichat <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/20200903080547.v3.1.I56cf27cd59f4013bd074dc622c8b8248b034a4cc@changeid
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rpmsg/mtk_rpmsg.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/rpmsg/mtk_rpmsg.c b/drivers/rpmsg/mtk_rpmsg.c
index 83f2b8804ee98..96a17ec291401 100644
--- a/drivers/rpmsg/mtk_rpmsg.c
+++ b/drivers/rpmsg/mtk_rpmsg.c
@@ -200,7 +200,6 @@ static int mtk_rpmsg_register_device(struct mtk_rpmsg_rproc_subdev *mtk_subdev,
struct rpmsg_device *rpdev;
struct mtk_rpmsg_device *mdev;
struct platform_device *pdev = mtk_subdev->pdev;
- int ret;
mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
if (!mdev)
@@ -219,13 +218,7 @@ static int mtk_rpmsg_register_device(struct mtk_rpmsg_rproc_subdev *mtk_subdev,
rpdev->dev.parent = &pdev->dev;
rpdev->dev.release = mtk_rpmsg_release_device;
- ret = rpmsg_register_device(rpdev);
- if (ret) {
- kfree(mdev);
- return ret;
- }
-
- return 0;
+ return rpmsg_register_device(rpdev);
}
static void mtk_register_device_work_function(struct work_struct *register_work)
--
2.25.1
From: Matthew Rosato <[email protected]>
[ Upstream commit 12856e7acde4702b7c3238c15fcba86ff6aa507f ]
For VFs, the Memory Space Enable bit in the Command Register is
hard-wired to 0.
Add a new bit to signify devices where the Command Register Memory
Space Enable bit does not control the device's response to MMIO
accesses.
Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/iov.c | 1 +
include/linux/pci.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index b37e08c4f9d1a..4afd4ee4f7f04 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -180,6 +180,7 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id)
virtfn->device = iov->vf_device;
virtfn->is_virtfn = 1;
virtfn->physfn = pci_dev_get(dev);
+ virtfn->no_command_memory = 1;
if (id == 0)
pci_read_vf_config_common(virtfn);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 34c1c4f45288f..1bc3c020672fd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -439,6 +439,7 @@ struct pci_dev {
unsigned int is_probed:1; /* Device probing in progress */
unsigned int link_active_reporting:1;/* Device capable of reporting link active */
unsigned int no_vf_scan:1; /* Don't scan for VFs after IOV enablement */
+ unsigned int no_command_memory:1; /* No PCI_COMMAND_MEMORY */
pci_dev_flags_t dev_flags;
atomic_t enable_cnt; /* pci_enable_device has been called */
--
2.25.1
From: Yan Zhao <[email protected]>
[ Upstream commit 28b130244061863cf0437b7af1625fb45ec1a71e ]
When error occurs, need to put vfio group after a successful get.
Fixes: 95fc87b44104 ("vfio: Selective dirty page tracking if IOMMU backed device pins pages")
Signed-off-by: Yan Zhao <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/vfio.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index 2a70e25cfe954..fbff5c4743c5e 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -1948,8 +1948,10 @@ int vfio_pin_pages(struct device *dev, unsigned long *user_pfn, int npage,
if (!group)
return -ENODEV;
- if (group->dev_counter > 1)
- return -EINVAL;
+ if (group->dev_counter > 1) {
+ ret = -EINVAL;
+ goto err_pin_pages;
+ }
ret = vfio_group_add_container_user(group);
if (ret)
--
2.25.1
From: Konrad Dybcio <[email protected]>
[ Upstream commit d46e5a39f9be9288f1ce2170c4c7f8098f4e7f68 ]
This was likely overlooked while porting the driver upstream.
Reported-by: Pavel Dubrova <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gcc-sdm660.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-sdm660.c b/drivers/clk/qcom/gcc-sdm660.c
index c6fb57cd576f5..aa5c0c6ead017 100644
--- a/drivers/clk/qcom/gcc-sdm660.c
+++ b/drivers/clk/qcom/gcc-sdm660.c
@@ -666,7 +666,7 @@ static struct clk_rcg2 hmss_rbcpr_clk_src = {
.cmd_rcgr = 0x48044,
.mnd_width = 0,
.hid_width = 5,
- .parent_map = gcc_parent_map_xo_gpll0_gpll0_early_div,
+ .parent_map = gcc_parent_map_xo_gpll0,
.freq_tbl = ftbl_hmss_rbcpr_clk_src,
.clkr.hw.init = &(struct clk_init_data){
.name = "hmss_rbcpr_clk_src",
--
2.25.1
From: Pali Rohár <[email protected]>
[ Upstream commit 7862a6134456c8b4f8c39e8c94aa97e5c2f7f2b7 ]
Function pci_bridge_emul_init() may fail so correctly check for errors.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 8caa80b19cf86..d5f58684d962c 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -608,7 +608,7 @@ static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
* Initialize the configuration space of the PCI-to-PCI bridge
* associated with the given PCIe interface.
*/
-static void advk_sw_pci_bridge_init(struct advk_pcie *pcie)
+static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
{
struct pci_bridge_emul *bridge = &pcie->bridge;
@@ -634,8 +634,7 @@ static void advk_sw_pci_bridge_init(struct advk_pcie *pcie)
bridge->data = pcie;
bridge->ops = &advk_pci_bridge_emul_ops;
- pci_bridge_emul_init(bridge, 0);
-
+ return pci_bridge_emul_init(bridge, 0);
}
static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
@@ -1169,7 +1168,11 @@ static int advk_pcie_probe(struct platform_device *pdev)
advk_pcie_setup_hw(pcie);
- advk_sw_pci_bridge_init(pcie);
+ ret = advk_sw_pci_bridge_init(pcie);
+ if (ret) {
+ dev_err(dev, "Failed to register emulated root PCI bridge\n");
+ return ret;
+ }
ret = advk_pcie_init_irq_domain(pcie);
if (ret) {
--
2.25.1
From: Mark Tomlinson <[email protected]>
[ Upstream commit eb7eacaa5b9e4f665bd08d416c8f88e63d2f123c ]
The core interrupt code expects the irq_set_affinity call to update the
effective affinity for the interrupt. This was not being done, so update
iproc_msi_irq_set_affinity() to do so.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3bc2b2348835 ("PCI: iproc: Add iProc PCIe MSI support")
Signed-off-by: Mark Tomlinson <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Ray Jui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-iproc-msi.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c
index 3176ad3ab0e52..908475d27e0e7 100644
--- a/drivers/pci/controller/pcie-iproc-msi.c
+++ b/drivers/pci/controller/pcie-iproc-msi.c
@@ -209,15 +209,20 @@ static int iproc_msi_irq_set_affinity(struct irq_data *data,
struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
int target_cpu = cpumask_first(mask);
int curr_cpu;
+ int ret;
curr_cpu = hwirq_to_cpu(msi, data->hwirq);
if (curr_cpu == target_cpu)
- return IRQ_SET_MASK_OK_DONE;
+ ret = IRQ_SET_MASK_OK_DONE;
+ else {
+ /* steer MSI to the target CPU */
+ data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+ ret = IRQ_SET_MASK_OK;
+ }
- /* steer MSI to the target CPU */
- data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+ irq_data_update_effective_affinity(data, cpumask_of(target_cpu));
- return IRQ_SET_MASK_OK;
+ return ret;
}
static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
--
2.25.1
From: Dexuan Cui <[email protected]>
[ Upstream commit 915cff7f38c5e4d47f187f8049245afc2cb3e503 ]
pci_restore_msi_state() directly writes the MSI/MSI-X related registers
via MMIO. On a physical machine, this works perfectly; for a Linux VM
running on a hypervisor, which typically enables IOMMU interrupt remapping,
the hypervisor usually should trap and emulate the MMIO accesses in order
to re-create the necessary interrupt remapping table entries in the IOMMU,
otherwise the interrupts can not work in the VM after hibernation.
Hyper-V is different from other hypervisors in that it does not trap and
emulate the MMIO accesses, and instead it uses a para-virtualized method,
which requires the VM to call hv_compose_msi_msg() to notify the hypervisor
of the info that would be passed to the hypervisor in the case of the
trap-and-emulate method. This is not an issue to a lot of PCI device
drivers, which destroy and re-create the interrupts across hibernation, so
hv_compose_msi_msg() is called automatically. However, some PCI device
drivers (e.g. the in-tree GPU driver nouveau and the out-of-tree Nvidia
proprietary GPU driver) do not destroy and re-create MSI/MSI-X interrupts
across hibernation, so hv_pci_resume() has to call hv_compose_msi_msg(),
otherwise the PCI device drivers can no longer receive interrupts after
the VM resumes from hibernation.
Hyper-V is also different in that chip->irq_unmask() may fail in a
Linux VM running on Hyper-V (on a physical machine, chip->irq_unmask()
can not fail because unmasking an MSI/MSI-X register just means an MMIO
write): during hibernation, when a CPU is offlined, the kernel tries
to move the interrupt to the remaining CPUs that haven't been offlined
yet. In this case, hv_irq_unmask() -> hv_do_hypercall() always fails
because the vmbus channel has been closed: here the early "return" in
hv_irq_unmask() means the pci_msi_unmask_irq() is not called, i.e. the
desc->masked remains "true", so later after hibernation, the MSI interrupt
always remains masked, which is incorrect. Refer to cpu_disable_common()
-> fixup_irqs() -> irq_migrate_all_off_this_cpu() -> migrate_one_irq():
static bool migrate_one_irq(struct irq_desc *desc)
{
...
if (maskchip && chip->irq_mask)
chip->irq_mask(d);
...
err = irq_do_set_affinity(d, affinity, false);
...
if (maskchip && chip->irq_unmask)
chip->irq_unmask(d);
Fix the issue by calling pci_msi_unmask_irq() unconditionally in
hv_irq_unmask(). Also suppress the error message for hibernation because
the hypercall failure during hibernation does not matter (at this time
all the devices have been frozen). Note: the correct affinity info is
still updated into the irqdata data structure in migrate_one_irq() ->
irq_do_set_affinity() -> hv_set_affinity(), so later when the VM
resumes, hv_pci_restore_msi_state() is able to correctly restore
the interrupt with the correct affinity.
Link: https://lore.kernel.org/r/[email protected]
Fixes: ac82fc832708 ("PCI: hv: Add hibernation support")
Signed-off-by: Dexuan Cui <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Jake Oshins <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-hyperv.c | 50 +++++++++++++++++++++++++++--
1 file changed, 47 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index bf40ff09c99d6..95c04b0ffeb16 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1275,11 +1275,25 @@ static void hv_irq_unmask(struct irq_data *data)
exit_unlock:
spin_unlock_irqrestore(&hbus->retarget_msi_interrupt_lock, flags);
- if (res) {
+ /*
+ * During hibernation, when a CPU is offlined, the kernel tries
+ * to move the interrupt to the remaining CPUs that haven't
+ * been offlined yet. In this case, the below hv_do_hypercall()
+ * always fails since the vmbus channel has been closed:
+ * refer to cpu_disable_common() -> fixup_irqs() ->
+ * irq_migrate_all_off_this_cpu() -> migrate_one_irq().
+ *
+ * Suppress the error message for hibernation because the failure
+ * during hibernation does not matter (at this time all the devices
+ * have been frozen). Note: the correct affinity info is still updated
+ * into the irqdata data structure in migrate_one_irq() ->
+ * irq_do_set_affinity() -> hv_set_affinity(), so later when the VM
+ * resumes, hv_pci_restore_msi_state() is able to correctly restore
+ * the interrupt with the correct affinity.
+ */
+ if (res && hbus->state != hv_pcibus_removing)
dev_err(&hbus->hdev->device,
"%s() failed: %#llx", __func__, res);
- return;
- }
pci_msi_unmask_irq(data);
}
@@ -3368,6 +3382,34 @@ static int hv_pci_suspend(struct hv_device *hdev)
return 0;
}
+static int hv_pci_restore_msi_msg(struct pci_dev *pdev, void *arg)
+{
+ struct msi_desc *entry;
+ struct irq_data *irq_data;
+
+ for_each_pci_msi_entry(entry, pdev) {
+ irq_data = irq_get_irq_data(entry->irq);
+ if (WARN_ON_ONCE(!irq_data))
+ return -EINVAL;
+
+ hv_compose_msi_msg(irq_data, &entry->msg);
+ }
+
+ return 0;
+}
+
+/*
+ * Upon resume, pci_restore_msi_state() -> ... -> __pci_write_msi_msg()
+ * directly writes the MSI/MSI-X registers via MMIO, but since Hyper-V
+ * doesn't trap and emulate the MMIO accesses, here hv_compose_msi_msg()
+ * must be used to ask Hyper-V to re-create the IOMMU Interrupt Remapping
+ * Table entries.
+ */
+static void hv_pci_restore_msi_state(struct hv_pcibus_device *hbus)
+{
+ pci_walk_bus(hbus->pci_bus, hv_pci_restore_msi_msg, NULL);
+}
+
static int hv_pci_resume(struct hv_device *hdev)
{
struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
@@ -3401,6 +3443,8 @@ static int hv_pci_resume(struct hv_device *hdev)
prepopulate_bars(hbus);
+ hv_pci_restore_msi_state(hbus);
+
hbus->state = hv_pcibus_installed;
return 0;
out:
--
2.25.1
From: Simon South <[email protected]>
[ Upstream commit 457f74abbed060a0395f75ab5297f2d76cada516 ]
Following commit cfc4c189bc70 ("pwm: Read initial hardware state at
request time") the Rockchip PWM driver can no longer assume a device's
pwm_state structure has been populated after a call to pwmchip_add().
Consequently, the test in rockchip_pwm_probe() intended to prevent the
driver from stopping PWM devices already enabled by the bootloader no
longer functions reliably and this can lead to the kernel hanging
during startup, particularly on devices like the Pinebook Pro that use
a PWM-controlled backlight for their display.
Avoid this by querying the device directly at probe time to determine
whether or not it is enabled.
Fixes: cfc4c189bc70 ("pwm: Read initial hardware state at request time")
Signed-off-by: Simon South <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-rockchip.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index eb8c9cb645a6c..098e94335cb5b 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -288,6 +288,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
const struct of_device_id *id;
struct rockchip_pwm_chip *pc;
struct resource *r;
+ u32 enable_conf, ctrl;
int ret, count;
id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev);
@@ -362,7 +363,9 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
}
/* Keep the PWM clk enabled if the PWM appears to be up and running. */
- if (!pwm_is_enabled(pc->chip.pwms))
+ enable_conf = pc->data->enable_conf;
+ ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+ if ((ctrl & enable_conf) != enable_conf)
clk_disable(pc->clk);
return 0;
--
2.25.1
From: Tero Kristo <[email protected]>
[ Upstream commit 2f05cced7307489faab873367fb20cd212e1d890 ]
The DT clock probe loop incorrectly terminates after processing "clocks"
only, fix this by re-starting the loop when all entries for current
DT property have been parsed.
Fixes: 8e48b33f9def ("clk: keystone: sci-clk: probe clocks from DT instead of firmware")
Reported-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Tero Kristo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Santosh Shilimkar <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/keystone/sci-clk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
index 7edf8c8432b67..64ea895f1a7df 100644
--- a/drivers/clk/keystone/sci-clk.c
+++ b/drivers/clk/keystone/sci-clk.c
@@ -522,7 +522,7 @@ static int ti_sci_scan_clocks_from_dt(struct sci_clk_provider *provider)
np = of_find_node_with_property(np, *clk_name);
if (!np) {
clk_name++;
- break;
+ continue;
}
if (!of_device_is_available(np))
--
2.25.1
From: Bob Pearson <[email protected]>
[ Upstream commit 71abf20b28ff87fee6951ec2218d5ce7969c4e87 ]
If skb_clone() is unable to allocate memory for a new sk_buff this is not
detected by the current code.
Check for a NULL return and continue. This is similar to other errors in
this loop over QPs attached to the multicast address and consistent with
the unreliable UD transport.
Fixes: e7ec96fc7932f ("RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()")
Addresses-Coverity-ID: 1497804: Null pointer dereferences (NULL_RETURNS)
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bob Pearson <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_recv.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/sw/rxe/rxe_recv.c b/drivers/infiniband/sw/rxe/rxe_recv.c
index be6416a982c70..9bfb98056fc2a 100644
--- a/drivers/infiniband/sw/rxe/rxe_recv.c
+++ b/drivers/infiniband/sw/rxe/rxe_recv.c
@@ -319,6 +319,9 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)
else
per_qp_skb = skb;
+ if (unlikely(!per_qp_skb))
+ continue;
+
per_qp_pkt = SKB_TO_PKT(per_qp_skb);
per_qp_pkt->qp = qp;
rxe_add_ref(qp);
--
2.25.1
From: Jan Kara <[email protected]>
[ Upstream commit 5b3dc19dda6691e8ab574e8eede1aef6f02a4f1c ]
ext4_mb_discard_group_preallocations() can be releasing group lock with
preallocations accumulated on its local list. Thus although
discard_pa_seq was incremented and concurrent allocating processes will
be retrying allocations, it can happen that premature ENOSPC error is
returned because blocks used for preallocations are not available for
reuse yet. Make sure we always free locally accumulated preallocations
before releasing group lock.
Fixes: 07b5b8e1ac40 ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/mballoc.c | 33 +++++++++++++--------------------
1 file changed, 13 insertions(+), 20 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 787a894f5d1da..79d32ea606aa1 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4037,7 +4037,7 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
struct ext4_buddy e4b;
int err;
int busy = 0;
- int free = 0;
+ int free, free_total = 0;
mb_debug(sb, "discard preallocation for group %u\n", group);
if (list_empty(&grp->bb_prealloc_list))
@@ -4065,6 +4065,7 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
INIT_LIST_HEAD(&list);
repeat:
+ free = 0;
ext4_lock_group(sb, group);
list_for_each_entry_safe(pa, tmp,
&grp->bb_prealloc_list, pa_group_list) {
@@ -4094,22 +4095,6 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
list_add(&pa->u.pa_tmp_list, &list);
}
- /* if we still need more blocks and some PAs were used, try again */
- if (free < needed && busy) {
- busy = 0;
- ext4_unlock_group(sb, group);
- cond_resched();
- goto repeat;
- }
-
- /* found anything to free? */
- if (list_empty(&list)) {
- BUG_ON(free != 0);
- mb_debug(sb, "Someone else may have freed PA for this group %u\n",
- group);
- goto out;
- }
-
/* now free all selected PAs */
list_for_each_entry_safe(pa, tmp, &list, u.pa_tmp_list) {
@@ -4127,14 +4112,22 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback);
}
-out:
+ free_total += free;
+
+ /* if we still need more blocks and some PAs were used, try again */
+ if (free_total < needed && busy) {
+ ext4_unlock_group(sb, group);
+ cond_resched();
+ busy = 0;
+ goto repeat;
+ }
ext4_unlock_group(sb, group);
ext4_mb_unload_buddy(&e4b);
put_bh(bitmap_bh);
out_dbg:
mb_debug(sb, "discarded (%d) blocks preallocated for group %u bb_free (%d)\n",
- free, group, grp->bb_free);
- return free;
+ free_total, group, grp->bb_free);
+ return free_total;
}
/*
--
2.25.1
From: Tobias Jordan <[email protected]>
[ Upstream commit 904542dc56524f921a6bab0639ff6249c01e775f ]
Whether crc32_be needs a lookup table is chosen based on CRC_LE_BITS.
Obviously, the _be function should be governed by the _BE_ define.
This probably never pops up as it's hard to come up with a configuration
where CRC_BE_BITS isn't the same as CRC_LE_BITS and as nobody is using
bitwise CRC anyway.
Fixes: 46c5801eaf86 ("crc32: bolt on crc32c")
Signed-off-by: Tobias Jordan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/crc32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/crc32.c b/lib/crc32.c
index 4a20455d1f61e..bf60ef26a45c2 100644
--- a/lib/crc32.c
+++ b/lib/crc32.c
@@ -331,7 +331,7 @@ static inline u32 __pure crc32_be_generic(u32 crc, unsigned char const *p,
return crc;
}
-#if CRC_LE_BITS == 1
+#if CRC_BE_BITS == 1
u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len)
{
return crc32_be_generic(crc, p, len, NULL, CRC32_POLY_BE);
--
2.25.1
From: Darrick J. Wong <[email protected]>
[ Upstream commit af8c53c8bc087459b1aadd4c94805d8272358d79 ]
If userspace asked fsmap to try to count the number of entries, we cannot
return more than UINT_MAX entries because fmh_entries is u32.
Therefore, stop counting if we hit this limit or else we will waste time
to return truncated results.
Fixes: 0c9ec4beecac ("ext4: support GETFSMAP ioctls")
Signed-off-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/20201001222148.GA49520@magnolia
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/fsmap.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/ext4/fsmap.c b/fs/ext4/fsmap.c
index dbccf46f17709..37347ba868b70 100644
--- a/fs/ext4/fsmap.c
+++ b/fs/ext4/fsmap.c
@@ -108,6 +108,9 @@ static int ext4_getfsmap_helper(struct super_block *sb,
/* Are we just counting mappings? */
if (info->gfi_head->fmh_count == 0) {
+ if (info->gfi_head->fmh_entries == UINT_MAX)
+ return EXT4_QUERY_RANGE_ABORT;
+
if (rec_fsblk > info->gfi_next_fsblk)
info->gfi_head->fmh_entries++;
--
2.25.1
From: Martijn de Gouw <[email protected]>
[ Upstream commit d48c8124749c9a5081fe68680f83605e272c984b ]
When the passed token is longer than 4032 bytes, the remaining part
of the token must be copied from the rqstp->rq_arg.pages. But the
copy must make sure it happens in a consecutive way.
With the existing code, the first memcpy copies 'length' bytes from
argv->iobase, but since the header is in front, this never fills the
whole first page of in_token->pages.
The mecpy in the loop copies the following bytes, but starts writing at
the next page of in_token->pages. This leaves the last bytes of page 0
unwritten.
Symptoms were that users with many groups were not able to access NFS
exports, when using Active Directory as the KDC.
Signed-off-by: Martijn de Gouw <[email protected]>
Fixes: 5866efa8cbfb "SUNRPC: Fix svcauth_gss_proxy_init()"
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/auth_gss/svcauth_gss.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index c28051f7d217d..653c317694406 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1104,9 +1104,9 @@ static int gss_read_proxy_verf(struct svc_rqst *rqstp,
struct gssp_in_token *in_token)
{
struct kvec *argv = &rqstp->rq_arg.head[0];
- unsigned int page_base, length;
- int pages, i, res;
- size_t inlen;
+ unsigned int length, pgto_offs, pgfrom_offs;
+ int pages, i, res, pgto, pgfrom;
+ size_t inlen, to_offs, from_offs;
res = gss_read_common_verf(gc, argv, authp, in_handle);
if (res)
@@ -1134,17 +1134,24 @@ static int gss_read_proxy_verf(struct svc_rqst *rqstp,
memcpy(page_address(in_token->pages[0]), argv->iov_base, length);
inlen -= length;
- i = 1;
- page_base = rqstp->rq_arg.page_base;
+ to_offs = length;
+ from_offs = rqstp->rq_arg.page_base;
while (inlen) {
- length = min_t(unsigned int, inlen, PAGE_SIZE);
- memcpy(page_address(in_token->pages[i]),
- page_address(rqstp->rq_arg.pages[i]) + page_base,
+ pgto = to_offs >> PAGE_SHIFT;
+ pgfrom = from_offs >> PAGE_SHIFT;
+ pgto_offs = to_offs & ~PAGE_MASK;
+ pgfrom_offs = from_offs & ~PAGE_MASK;
+
+ length = min_t(unsigned int, inlen,
+ min_t(unsigned int, PAGE_SIZE - pgto_offs,
+ PAGE_SIZE - pgfrom_offs));
+ memcpy(page_address(in_token->pages[pgto]) + pgto_offs,
+ page_address(rqstp->rq_arg.pages[pgfrom]) + pgfrom_offs,
length);
+ to_offs += length;
+ from_offs += length;
inlen -= length;
- page_base = 0;
- i++;
}
return 0;
}
--
2.25.1
From: Abel Vesa <[email protected]>
[ Upstream commit b159c63d82ff8ffddc6c6f0eb881b113b36ecad7 ]
According to the latest RM (see Table 5-1. Clock Root Table),
both usdhc root clocks have the parent order as follows:
000 - 25M_REF_CLK
001 - SYSTEM_PLL1_DIV2
010 - SYSTEM_PLL1_CLK
011 - SYSTEM_PLL2_DIV2
100 - SYSTEM_PLL3_CLK
101 - SYSTEM_PLL1_DIV3
110 - AUDIO_PLL2_CLK
111 - SYSTEM_PLL1_DIV8
So the audio_pll2_out and sys3_pll_out have to be swapped.
Fixes: b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM")
Signed-off-by: Abel Vesa <[email protected]>
Reported-by: Cosmin Stefan Stoica <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx8mq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index a64aace213c27..7762c5825e77d 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -157,10 +157,10 @@ static const char * const imx8mq_qspi_sels[] = {"osc_25m", "sys1_pll_400m", "sys
"audio_pll2_out", "sys1_pll_266m", "sys3_pll_out", "sys1_pll_100m", };
static const char * const imx8mq_usdhc1_sels[] = {"osc_25m", "sys1_pll_400m", "sys1_pll_800m", "sys2_pll_500m",
- "audio_pll2_out", "sys1_pll_266m", "sys3_pll_out", "sys1_pll_100m", };
+ "sys3_pll_out", "sys1_pll_266m", "audio_pll2_out", "sys1_pll_100m", };
static const char * const imx8mq_usdhc2_sels[] = {"osc_25m", "sys1_pll_400m", "sys1_pll_800m", "sys2_pll_500m",
- "audio_pll2_out", "sys1_pll_266m", "sys3_pll_out", "sys1_pll_100m", };
+ "sys3_pll_out", "sys1_pll_266m", "audio_pll2_out", "sys1_pll_100m", };
static const char * const imx8mq_i2c1_sels[] = {"osc_25m", "sys1_pll_160m", "sys2_pll_50m", "sys3_pll_out", "audio_pll1_out",
"video_pll1_out", "audio_pll2_out", "sys1_pll_133m", };
--
2.25.1
From: Xiaoyang Xu <[email protected]>
[ Upstream commit 2e6cfd496f5b57034cf2aec738799571b5a52124 ]
pfn is not added to pfn_list when vfio_add_to_pfn_list fails.
vfio_unpin_page_external will exit directly without calling
vfio_iova_put_vfio_pfn. This will lead to a memory leak.
Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Xiaoyang Xu <[email protected]>
[aw: simplified logic, add Fixes]
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/vfio_iommu_type1.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index eb7bb14e4f62a..00d3cf12e92c3 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -693,7 +693,8 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
ret = vfio_add_to_pfn_list(dma, iova, phys_pfn[i]);
if (ret) {
- vfio_unpin_page_external(dma, iova, do_accounting);
+ if (put_pfn(phys_pfn[i], dma->prot) && do_accounting)
+ vfio_lock_acct(dma, -1, true);
goto pin_unwind;
}
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit c277e1f0dc3c7d7b5b028e20dd414df241642036 ]
platform_get_irq() returns -ERRNO on error. In such case casting to
unsigned and comparing to 0 would pass the check.
Fixes: 7abf38d6d13c ("Input: twl4030-keypad - add device tree support")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/twl4030_keypad.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index af3a6824f1a4d..77e0743a3cf85 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -50,7 +50,7 @@ struct twl4030_keypad {
bool autorepeat;
unsigned int n_rows;
unsigned int n_cols;
- unsigned int irq;
+ int irq;
struct device *dbg_dev;
struct input_dev *input;
@@ -376,10 +376,8 @@ static int twl4030_kp_probe(struct platform_device *pdev)
}
kp->irq = platform_get_irq(pdev, 0);
- if (!kp->irq) {
- dev_err(&pdev->dev, "no keyboard irq assigned\n");
- return -EINVAL;
- }
+ if (kp->irq < 0)
+ return kp->irq;
error = matrix_keypad_build_keymap(keymap_data, NULL,
TWL4030_MAX_ROWS,
--
2.25.1
From: Ard Biesheuvel <[email protected]>
[ Upstream commit 7bc1a0f9e1765830e945669c99c59c35cf9bca82 ]
On arm64, the global variable memstart_addr represents the physical
address of PAGE_OFFSET, and so physical to virtual translations or
vice versa used to come down to simple additions or subtractions
involving the values of PAGE_OFFSET and memstart_addr.
When support for 52-bit virtual addressing was introduced, we had to
deal with PAGE_OFFSET potentially being outside of the region that
can be covered by the virtual range (as the 52-bit VA capable build
needs to be able to run on systems that are only 48-bit VA capable),
and for this reason, another translation was introduced, and recorded
in the global variable physvirt_offset.
However, if we go back to the original definition of memstart_addr,
i.e., the physical address of PAGE_OFFSET, it turns out that there is
no need for two separate translations: instead, we can simply subtract
the size of the unaddressable VA space from memstart_addr to make the
available physical memory appear in the 48-bit addressable VA region.
This simplifies things, but also fixes a bug on KASLR builds, which
may update memstart_addr later on in arm64_memblock_init(), but fails
to update vmemmap and physvirt_offset accordingly.
Fixes: 5383cc6efed1 ("arm64: mm: Introduce vabits_actual")
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Steve Capper <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/memory.h | 5 ++---
arch/arm64/include/asm/pgtable.h | 4 ++--
arch/arm64/mm/init.c | 30 ++++++++++--------------------
3 files changed, 14 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index a1871bb32bb17..d207f63eb68e1 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -163,7 +163,6 @@ extern u64 vabits_actual;
#include <linux/bitops.h>
#include <linux/mmdebug.h>
-extern s64 physvirt_offset;
extern s64 memstart_addr;
/* PHYS_OFFSET - the physical address of the start of memory. */
#define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
@@ -239,7 +238,7 @@ static inline const void *__tag_set(const void *addr, u8 tag)
*/
#define __is_lm_address(addr) (!(((u64)addr) & BIT(vabits_actual - 1)))
-#define __lm_to_phys(addr) (((addr) + physvirt_offset))
+#define __lm_to_phys(addr) (((addr) & ~PAGE_OFFSET) + PHYS_OFFSET)
#define __kimg_to_phys(addr) ((addr) - kimage_voffset)
#define __virt_to_phys_nodebug(x) ({ \
@@ -257,7 +256,7 @@ extern phys_addr_t __phys_addr_symbol(unsigned long x);
#define __phys_addr_symbol(x) __pa_symbol_nodebug(x)
#endif /* CONFIG_DEBUG_VIRTUAL */
-#define __phys_to_virt(x) ((unsigned long)((x) - physvirt_offset))
+#define __phys_to_virt(x) ((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
#define __phys_to_kimg(x) ((unsigned long)((x) + kimage_voffset))
/*
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 758e2d1577d0c..a1745d6ea4b58 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -23,6 +23,8 @@
#define VMALLOC_START (MODULES_END)
#define VMALLOC_END (- PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
+#define vmemmap ((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT))
+
#define FIRST_USER_ADDRESS 0UL
#ifndef __ASSEMBLY__
@@ -33,8 +35,6 @@
#include <linux/mm_types.h>
#include <linux/sched.h>
-extern struct page *vmemmap;
-
extern void __pte_error(const char *file, int line, unsigned long val);
extern void __pmd_error(const char *file, int line, unsigned long val);
extern void __pud_error(const char *file, int line, unsigned long val);
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 1e93cfc7c47ad..ca4410eb230a3 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -54,12 +54,6 @@
s64 memstart_addr __ro_after_init = -1;
EXPORT_SYMBOL(memstart_addr);
-s64 physvirt_offset __ro_after_init;
-EXPORT_SYMBOL(physvirt_offset);
-
-struct page *vmemmap __ro_after_init;
-EXPORT_SYMBOL(vmemmap);
-
/*
* We create both ZONE_DMA and ZONE_DMA32. ZONE_DMA covers the first 1G of
* memory as some devices, namely the Raspberry Pi 4, have peripherals with
@@ -290,20 +284,6 @@ void __init arm64_memblock_init(void)
memstart_addr = round_down(memblock_start_of_DRAM(),
ARM64_MEMSTART_ALIGN);
- physvirt_offset = PHYS_OFFSET - PAGE_OFFSET;
-
- vmemmap = ((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT));
-
- /*
- * If we are running with a 52-bit kernel VA config on a system that
- * does not support it, we have to offset our vmemmap and physvirt_offset
- * s.t. we avoid the 52-bit portion of the direct linear map
- */
- if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52)) {
- vmemmap += (_PAGE_OFFSET(48) - _PAGE_OFFSET(52)) >> PAGE_SHIFT;
- physvirt_offset = PHYS_OFFSET - _PAGE_OFFSET(48);
- }
-
/*
* Remove the memory that we will not be able to cover with the
* linear mapping. Take care not to clip the kernel which may be
@@ -318,6 +298,16 @@ void __init arm64_memblock_init(void)
memblock_remove(0, memstart_addr);
}
+ /*
+ * If we are running with a 52-bit kernel VA config on a system that
+ * does not support it, we have to place the available physical
+ * memory in the 48-bit addressable part of the linear region, i.e.,
+ * we have to move it upward. Since memstart_addr represents the
+ * physical address of PAGE_OFFSET, we have to *subtract* from it.
+ */
+ if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52))
+ memstart_addr -= _PAGE_OFFSET(48) - _PAGE_OFFSET(52);
+
/*
* Apply the memory limit if it was set. Since the kernel may be loaded
* high up in memory, add back the kernel region that must be accessible
--
2.25.1
From: Daniel Jordan <[email protected]>
[ Upstream commit fdf09ab887829cd1b671e45d9549f8ec1ffda0fa ]
Corentin hit the following workqueue warning when running with
CRYPTO_MANAGER_EXTRA_TESTS:
WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0
Modules linked in: ghash_generic
CPU: 2 PID: 147 Comm: modprobe Not tainted
5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545
Hardware name: Pine H64 model A (DT)
pc : __queue_work+0x3b8/0x3d0
Call trace:
__queue_work+0x3b8/0x3d0
queue_work_on+0x6c/0x90
do_init_module+0x188/0x1f0
load_module+0x1d00/0x22b0
I wasn't able to reproduce on x86 or rpi 3b+.
This is
WARN_ON(!list_empty(&work->entry))
from __queue_work(), and it happens because the init_free_wq work item
isn't initialized in time for a crypto test that requests the gcm
module. Some crypto tests were recently moved earlier in boot as
explained in commit c4741b230597 ("crypto: run initcalls for generic
implementations earlier"), which went into mainline less than two weeks
before the Fixes commit.
Avoid the warning by statically initializing init_free_wq and the
corresponding llist.
Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/
Fixes: 1a7b7d922081 ("modules: Use vmalloc special flag")
Reported-by: Corentin Labbe <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Tested-on: sun50i-h6-pine-h64
Tested-on: imx8mn-ddr4-evk
Tested-on: sun50i-a64-bananapi-m64
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Daniel Jordan <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/module.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/kernel/module.c b/kernel/module.c
index 08c46084d8cca..991395d60f59c 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -91,8 +91,9 @@ EXPORT_SYMBOL_GPL(module_mutex);
static LIST_HEAD(modules);
/* Work queue for freeing init sections in success case */
-static struct work_struct init_free_wq;
-static struct llist_head init_free_list;
+static void do_free_init(struct work_struct *w);
+static DECLARE_WORK(init_free_wq, do_free_init);
+static LLIST_HEAD(init_free_list);
#ifdef CONFIG_MODULES_TREE_LOOKUP
@@ -3551,14 +3552,6 @@ static void do_free_init(struct work_struct *w)
}
}
-static int __init modules_wq_init(void)
-{
- INIT_WORK(&init_free_wq, do_free_init);
- init_llist_head(&init_free_list);
- return 0;
-}
-module_init(modules_wq_init);
-
/*
* This is where the real work happens.
*
--
2.25.1
From: YueHaibing <[email protected]>
[ Upstream commit d04afe14b23651e7a8bc89727a759e982a8458e4 ]
In stmfts_sysfs_hover_enable_write(), we should check value and
sdata->hover_enabled is all true.
Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Signed-off-by: YueHaibing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/stmfts.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index b54cc64e4ea64..389356332c54a 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -479,7 +479,7 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
mutex_lock(&sdata->mutex);
- if (value & sdata->hover_enabled)
+ if (value && sdata->hover_enabled)
goto out;
if (sdata->running)
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 7d50f6656dacf085a00beeedbc48b19a37d17881 ]
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: 60214f058f44 ("Input: ep93xx_keypad - update driver to new core support")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/ep93xx_keypad.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 7c70492d9d6b5..f831f01501d58 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -250,8 +250,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
}
keypad->irq = platform_get_irq(pdev, 0);
- if (!keypad->irq) {
- err = -ENXIO;
+ if (keypad->irq < 0) {
+ err = keypad->irq;
goto failed_free;
}
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 4738dd1992fa13acfbbd71800c71c612f466fa44 ]
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/omap4-keypad.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 94c94d7f5155f..d6c924032aaa8 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -240,10 +240,8 @@ static int omap4_keypad_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- if (!irq) {
- dev_err(&pdev->dev, "no keyboard irq assigned\n");
- return -EINVAL;
- }
+ if (irq < 0)
+ return irq;
keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
if (!keypad_data) {
--
2.25.1
From: YueHaibing <[email protected]>
[ Upstream commit 13d029ee51da365aa9c859db0c7395129252bde8 ]
If CONFIG_OF is n, gcc fails:
drivers/memory/omap-gpmc.o: In function `gpmc_omap_onenand_set_timings':
omap-gpmc.c:(.text+0x2a88): undefined reference to `gpmc_read_settings_dt'
Add gpmc_read_settings_dt() helper function, which zero the gpmc_settings
so the caller doesn't proceed with random/invalid settings.
Fixes: a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT")
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Roger Quadros <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/omap-gpmc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index b5055577843a2..27bc417029e11 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -2274,6 +2274,10 @@ static void gpmc_probe_dt_children(struct platform_device *pdev)
}
}
#else
+void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
+{
+ memset(p, 0, sizeof(*p));
+}
static int gpmc_probe_dt(struct platform_device *pdev)
{
return 0;
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit cafb3abea6136e59ea534004e5773361e196bb94 ]
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/serio/sun4i-ps2.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
index a681a2c04e399..f15ed3dcdb9b2 100644
--- a/drivers/input/serio/sun4i-ps2.c
+++ b/drivers/input/serio/sun4i-ps2.c
@@ -211,7 +211,6 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
struct sun4i_ps2data *drvdata;
struct serio *serio;
struct device *dev = &pdev->dev;
- unsigned int irq;
int error;
drvdata = kzalloc(sizeof(struct sun4i_ps2data), GFP_KERNEL);
@@ -264,14 +263,12 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
writel(0, drvdata->reg_base + PS2_REG_GCTL);
/* Get IRQ for the device */
- irq = platform_get_irq(pdev, 0);
- if (!irq) {
- dev_err(dev, "no IRQ found\n");
- error = -ENXIO;
+ drvdata->irq = platform_get_irq(pdev, 0);
+ if (drvdata->irq < 0) {
+ error = drvdata->irq;
goto err_disable_clk;
}
- drvdata->irq = irq;
drvdata->serio = serio;
drvdata->dev = dev;
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 791619f66843a213784efb2f171be98933bad991 ]
The i.MX General Power Controller v2 device node was missing interrupts
property necessary to route its interrupt to GIC. This also fixes the
dbts_check warnings like:
arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc@303a0000:
{'compatible': ... '$nodename': ['gpc@303a0000']} is not valid under any of the given schemas
arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc@303a0000: 'interrupts' is a required property
Fixes: fdbcc04da246 ("arm64: dts: imx8mq: add GPC power domains")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 66ac66856e7e8..077e12a0de3f9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -614,6 +614,7 @@ src: reset-controller@30390000 {
gpc: gpc@303a0000 {
compatible = "fsl,imx8mq-gpc";
reg = <0x303a0000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <3>;
--
2.25.1
From: Stephan Gerhold <[email protected]>
[ Upstream commit e6859ae8603c5946b8f3ecbd9b4f02b72955b9d0 ]
Commit fe2aff0c574d2 ("arm64: dts: qcom: msm8916: remove unit name for thermal trip points")
removed the unit names for most of the thermal trip points defined
in msm8916.dtsi, but missed to update the one for cpu0_1-thermal.
So why wasn't this spotted by "make dtbs_check"? Apparently, the name
of the thermal zone is already invalid: thermal-zones.yaml specifies
a regex of ^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$, so it is not allowed
to contain underscores. Therefore the thermal zone was never verified
using the DTB schema.
After replacing the underscore in the thermal zone name, the warning
shows up:
apq8016-sbc.dt.yaml: thermal-zones: cpu0-1-thermal:trips: 'trip-point@0'
does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
Fix up the thermal zone names and remove the unit name for the trip point.
Cc: Amit Kucheria <[email protected]>
Fixes: fe2aff0c574d2 ("arm64: dts: qcom: msm8916: remove unit name for thermal trip points")
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 32bd140ac9fd4..729d36ff2e247 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -228,14 +228,14 @@ pmu {
};
thermal-zones {
- cpu0_1-thermal {
+ cpu0-1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
- cpu0_1_alert0: trip-point@0 {
+ cpu0_1_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
@@ -258,7 +258,7 @@ map0 {
};
};
- cpu2_3-thermal {
+ cpu2-3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
--
2.25.1
From: Stephan Gerhold <[email protected]>
[ Upstream commit c2f0cbb57dbac6da3d38b47b5b96de0fe4e23884 ]
Tha parent node of "wcd_codec" specifies #address-cells = <1>
and #size-cells = <0>, which means that each resource should be
described by one cell for the address and size omitted.
However, wcd_codec currently lists 0x200 as second cell (probably
the size of the resource). When parsing this would be treated like
another memory resource - which is entirely wrong.
To quote the device tree specification [1]:
"If the parent node specifies a value of 0 for #size-cells,
the length field in the value of reg shall be omitted."
[1]: https://www.devicetree.org/specifications/
Fixes: 5582fcb3829f ("arm64: dts: apq8016-sbc: add analog audio support with multicodec")
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/pm8916.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 0bcdf04711079..adf9a5988cdc2 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -119,7 +119,7 @@ pm8916_vib: vibrator@c000 {
wcd_codec: codec@f000 {
compatible = "qcom,pm8916-wcd-analog-codec";
- reg = <0xf000 0x200>;
+ reg = <0xf000>;
reg-names = "pmic-codec-core";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
--
2.25.1
From: Timothée COCAULT <[email protected]>
[ Upstream commit 63137bc5882a1882c553d389fdeeeace86ee1741 ]
Fixes an error causing small packets to get dropped. skb_ensure_writable
expects the second parameter to be a length in the ethernet payload.=20
If we want to write the ethernet header (src, dst), we should pass 0.
Otherwise, packets with small payloads (< ETH_ALEN) will get dropped.
Fixes: c1a831167901 ("netfilter: bridge: convert skb_make_writable to skb_ensure_writable")
Signed-off-by: Timothée COCAULT <[email protected]>
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/netfilter/ebt_dnat.c | 2 +-
net/bridge/netfilter/ebt_redirect.c | 2 +-
net/bridge/netfilter/ebt_snat.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/bridge/netfilter/ebt_dnat.c b/net/bridge/netfilter/ebt_dnat.c
index 12a4f4d936810..3fda71a8579d1 100644
--- a/net/bridge/netfilter/ebt_dnat.c
+++ b/net/bridge/netfilter/ebt_dnat.c
@@ -21,7 +21,7 @@ ebt_dnat_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
const struct ebt_nat_info *info = par->targinfo;
- if (skb_ensure_writable(skb, ETH_ALEN))
+ if (skb_ensure_writable(skb, 0))
return EBT_DROP;
ether_addr_copy(eth_hdr(skb)->h_dest, info->mac);
diff --git a/net/bridge/netfilter/ebt_redirect.c b/net/bridge/netfilter/ebt_redirect.c
index 0cad62a4052b9..307790562b492 100644
--- a/net/bridge/netfilter/ebt_redirect.c
+++ b/net/bridge/netfilter/ebt_redirect.c
@@ -21,7 +21,7 @@ ebt_redirect_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
const struct ebt_redirect_info *info = par->targinfo;
- if (skb_ensure_writable(skb, ETH_ALEN))
+ if (skb_ensure_writable(skb, 0))
return EBT_DROP;
if (xt_hooknum(par) != NF_BR_BROUTING)
diff --git a/net/bridge/netfilter/ebt_snat.c b/net/bridge/netfilter/ebt_snat.c
index 27443bf229a3b..7dfbcdfc30e5d 100644
--- a/net/bridge/netfilter/ebt_snat.c
+++ b/net/bridge/netfilter/ebt_snat.c
@@ -22,7 +22,7 @@ ebt_snat_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
const struct ebt_nat_info *info = par->targinfo;
- if (skb_ensure_writable(skb, ETH_ALEN * 2))
+ if (skb_ensure_writable(skb, 0))
return EBT_DROP;
ether_addr_copy(eth_hdr(skb)->h_source, info->mac);
--
2.25.1
From: Sudeep Holla <[email protected]>
[ Upstream commit 6ed6c558234f0b6c22e47a3c2feddce3d02324dd ]
scmi_mailbox is obtained from cinfo->transport_info and the first
call to mailbox_chan_free frees the channel and sets cinfo->transport_info
to NULL. Care is taken to check for non NULL smbox->chan but smbox can
itself be NULL. Fix it by checking for it without which, kernel crashes
with below NULL pointer dereference and eventually kernel panic.
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000038
Modules linked in: scmi_module(-)
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno
Development Platform, BIOS EDK II Sep 2 2020
pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
pc : mailbox_chan_free+0x2c/0x70 [scmi_module]
lr : idr_for_each+0x6c/0xf8
Call trace:
mailbox_chan_free+0x2c/0x70 [scmi_module]
idr_for_each+0x6c/0xf8
scmi_remove+0xa8/0xf0 [scmi_module]
platform_drv_remove+0x34/0x58
device_release_driver_internal+0x118/0x1f0
driver_detach+0x58/0xe8
bus_remove_driver+0x64/0xe0
driver_unregister+0x38/0x68
platform_driver_unregister+0x1c/0x28
scmi_driver_exit+0x38/0x44 [scmi_module]
---[ end trace 17bde19f50436de9 ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: 0x1d0000 from 0xffff800010000000
PHYS_OFFSET: 0x80000000
CPU features: 0x0240022,25806004
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception ]---
Link: https://lore.kernel.org/r/[email protected]
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: Cristian Marussi <[email protected]>
Cc: Viresh Kumar <[email protected]>
Tested-by: Cristian Marussi <[email protected]>
Reviewed-by: Cristian Marussi <[email protected]>
Reviewed-by: Viresh Kumar <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/arm_scmi/mailbox.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
index 6998dc86b5ce8..b797a713c3313 100644
--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -110,7 +110,7 @@ static int mailbox_chan_free(int id, void *p, void *data)
struct scmi_chan_info *cinfo = p;
struct scmi_mailbox *smbox = cinfo->transport_info;
- if (!IS_ERR(smbox->chan)) {
+ if (smbox && !IS_ERR(smbox->chan)) {
mbox_free_channel(smbox->chan);
cinfo->transport_info = NULL;
smbox->chan = NULL;
--
2.25.1
From: Amit Singh Tomar <[email protected]>
[ Upstream commit 4bb1eb3cd4bd6241d5e5f99bbfd801ea5a007b6c ]
After commit 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for
Actions Semi S700") following error has been observed while booting
Linux on Cubieboard7-lite(based on S700 SoC).
[ 0.257415] pinctrl-s700 e01b0000.pinctrl: can't request region for
resource [mem 0xe01b0000-0xe01b0fff]
[ 0.266902] pinctrl-s700: probe of e01b0000.pinctrl failed with error -16
This is due to the fact that memory range for "sps" power domain controller
clashes with pinctrl.
One way to fix it, is to limit pinctrl address range which is safe
to do as current pinctrl driver uses address range only up to 0x100.
This commit limits the pinctrl address range to 0x100 so that it doesn't
conflict with sps range.
Fixes: 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for Actions
Semi S700")
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Suggested-by: Andre Przywara <[email protected]>
Signed-off-by: Amit Singh Tomar <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/actions/s700.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 2006ad5424fa6..f8eb72bb41254 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -231,7 +231,7 @@ timer: timer@e024c000 {
pinctrl: pinctrl@e01b0000 {
compatible = "actions,s700-pinctrl";
- reg = <0x0 0xe01b0000 0x0 0x1000>;
+ reg = <0x0 0xe01b0000 0x0 0x100>;
clocks = <&cmu CLK_GPIO>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 136>;
--
2.25.1
From: Sibi Sankar <[email protected]>
[ Upstream commit 7a366707bb6a93baeb1a9ef46c4b9c875e0132d6 ]
The array type of get_domain_list_resp is incorrectly marked as NO_ARRAY.
Due to which the following error was observed when using pdr helpers with
the downstream proprietary pd-mapper. Fix this up by marking it as
VAR_LEN_ARRAY instead.
Err logs:
qmi_decode_struct_elem: Fault in decoding: dl(2), db(27), tl(160), i(1), el(1)
failed to decode incoming message
PDR: tms/servreg get domain list txn wait failed: -14
PDR: service lookup for tms/servreg failed: -14
Tested-by: Rishabh Bhatnagar <[email protected]>
Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Rishabh Bhatnagar <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/pdr_internal.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/pdr_internal.h b/drivers/soc/qcom/pdr_internal.h
index 15b5002e4127b..ab9ae8cdfa54c 100644
--- a/drivers/soc/qcom/pdr_internal.h
+++ b/drivers/soc/qcom/pdr_internal.h
@@ -185,7 +185,7 @@ struct qmi_elem_info servreg_get_domain_list_resp_ei[] = {
.data_type = QMI_STRUCT,
.elem_len = SERVREG_DOMAIN_LIST_LENGTH,
.elem_size = sizeof(struct servreg_location_entry),
- .array_type = NO_ARRAY,
+ .array_type = VAR_LEN_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct servreg_get_domain_list_resp,
domain_list),
--
2.25.1
From: Jing Xiangfeng <[email protected]>
[ Upstream commit f0f6c3a4fcb80fcbcce4ff6739996dd98c228afd ]
Fix to return error code -ENODEV from the error handling case instead of 0.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 11ea3824140c ("scsi: bfa: fix calls to dma_set_mask_and_coherent()")
Signed-off-by: Jing Xiangfeng <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/bfa/bfad.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index bc5d84f87d8fc..440ef32be048f 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -749,6 +749,7 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
if (bfad->pci_bar0_kva == NULL) {
printk(KERN_ERR "Fail to map bar0\n");
+ rc = -ENODEV;
goto out_release_region;
}
--
2.25.1
From: Tony Lindgren <[email protected]>
[ Upstream commit 8f04aea048d56f3e39a7e543939450246542a6fc ]
If cpu_cluster_pm_enter() fails, we need to set MPU power domain back
to enabled to prevent the next WFI from potentially triggering an
undesired MPU power domain state change.
We already do this for omap_enter_idle_smp() but are missing it for
omap_enter_idle_coupled().
Fixes: 55be2f50336f ("ARM: OMAP2+: Handle errors for cpu_pm")
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap2/cpuidle44xx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 6f5f89711f256..a92d277f81a08 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -174,8 +174,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
*/
if (mpuss_can_lose_context) {
error = cpu_cluster_pm_enter();
- if (error)
+ if (error) {
+ omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
goto cpu_cluster_pm_out;
+ }
}
}
--
2.25.1
From: Marek Vasut <[email protected]>
[ Upstream commit b0a07f609600b6fa4c30f783db50c38456804485 ]
The PHY and the VIO regulator is populated on the SoM, move it
into the SoM DT.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
To: [email protected]
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 33 -----------------
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 36 +++++++++++++++++++
2 files changed, 36 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 7c4bd615b3115..9cf6d90fbf69f 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -11,7 +11,6 @@ aliases {
serial0 = &uart4;
serial1 = &usart3;
serial2 = &uart8;
- ethernet0 = ðernet0;
};
chosen {
@@ -33,16 +32,6 @@ display_bl: display-bl {
status = "okay";
};
- ethernet_vio: vioregulator {
- compatible = "regulator-fixed";
- regulator-name = "vio";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- regulator-boot-on;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#size-cells = <0>;
@@ -141,28 +130,6 @@ &cec {
status = "okay";
};
-ðernet0 {
- status = "okay";
- pinctrl-0 = <ðernet0_rmii_pins_a>;
- pinctrl-1 = <ðernet0_rmii_sleep_pins_a>;
- pinctrl-names = "default", "sleep";
- phy-mode = "rmii";
- max-speed = <100>;
- phy-handle = <&phy0>;
- st,eth-ref-clk-sel;
- phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
-
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
-
- phy0: ethernet-phy@1 {
- reg = <1>;
- };
- };
-};
-
&i2c2 { /* Header X22 */
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index ba905196fb549..d30a3c60da9b0 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -9,6 +9,10 @@
#include <dt-bindings/mfd/st,stpmic1.h>
/ {
+ aliases {
+ ethernet0 = ðernet0;
+ };
+
memory@c0000000 {
device_type = "memory";
reg = <0xC0000000 0x40000000>;
@@ -55,6 +59,16 @@ retram: retram@38000000 {
no-map;
};
};
+
+ ethernet_vio: vioregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vio";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&adc {
@@ -94,6 +108,28 @@ &dts {
status = "okay";
};
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rmii_pins_a>;
+ pinctrl-1 = <ðernet0_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ max-speed = <100>;
+ phy-handle = <&phy0>;
+ st,eth-ref-clk-sel;
+ phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
--
2.25.1
From: Stephan Gerhold <[email protected]>
[ Upstream commit 027cca9eb5b450c3f6bb916ba999144c2ec23cb7 ]
The mdss node sets #interrupt-cells = <1>, so its interrupts
should be referenced using a single cell (in this case: only the
interrupt number).
However, right now the mdp/dsi node both have two interrupt cells
set, e.g. interrupts = <4 0>. The 0 is probably meant to say
IRQ_TYPE_NONE (= 0), but with #interrupt-cells = <1> this is
actually interpreted as a second interrupt line.
Remove the IRQ flags from both interrupts to fix this.
Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 729d36ff2e247..103d2226c579b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1021,7 +1021,7 @@ mdp: mdp@1a01000 {
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
- interrupts = <0 0>;
+ interrupts = <0>;
clocks = <&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
@@ -1053,7 +1053,7 @@ dsi0: dsi@1a98000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 0>;
+ interrupts = <4>;
assigned-clocks = <&gcc BYTE0_CLK_SRC>,
<&gcc PCLK0_CLK_SRC>;
--
2.25.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 453802c463abd003a7c38ffbc90b67ba162335b6 ]
According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be
used with SYS-DMAC0 on R-Car E3.
Fixes: 8517042060b55a37 ("arm64: dts: renesas: r8a77990: Add DMA properties to MSIOF nodes")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 1991bdc36792f..27f74df8efbde 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1192,9 +1192,8 @@ msiof1: spi@e6ea0000 {
reg = <0 0xe6ea0000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 210>;
- dmas = <&dmac1 0x43>, <&dmac1 0x42>,
- <&dmac2 0x43>, <&dmac2 0x42>;
- dma-names = "tx", "rx", "tx", "rx";
+ dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
--
2.25.1
From: Horia Geantă <[email protected]>
[ Upstream commit 82ffb35c2ce63ef8e0325f75eb48022abcf8edbe ]
rng DT node was added without a compatible string.
i.MX driver for RNGC (drivers/char/hw_random/imx-rngc.c) also claims
support for RNGB, and is currently used for i.MX25.
Let's use this driver also for RNGB block in i.MX6SL.
Fixes: e29fe21cff96 ("ARM: dts: add device tree source for imx6sl SoC")
Signed-off-by: Horia Geantă <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx6sl.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 911d8cf77f2c6..0339a46fa71c5 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -939,8 +939,10 @@ memory-controller@21b0000 {
};
rngb: rngb@21b4000 {
+ compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
reg = <0x021b4000 0x4000>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
};
weim: weim@21b8000 {
--
2.25.1
From: Qiang Yu <[email protected]>
[ Upstream commit 2933bf3528007f834fb7f5eab033f9c5b0683f91 ]
H5's Mali GPU PMU is not present or working corretly although
H5 datasheet record its interrupt vector.
Adding this module will miss lead lima driver try to shutdown
it and get waiting timeout. This problem is not exposed before
lima runtime PM support is added.
Fixes: bb39ed07e55b ("arm64: dts: allwinner: h5: Add device node for Mali-450 GPU")
Signed-off-by: Qiang Yu <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 4462a68c06815..cdc4209f94d0e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -125,8 +125,7 @@ mali: gpu@1e80000 {
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp",
@@ -137,8 +136,7 @@ mali: gpu@1e80000 {
"pp2",
"ppmmu2",
"pp3",
- "ppmmu3",
- "pmu";
+ "ppmmu3";
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 750cf40c0f7088f36a8a5d102e0488b1ac47faf5 ]
On error the function was meant to return -ERRNO. This also fixes
compile warning:
drivers/soc/fsl/qbman/bman.c:640:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
Fixes: 0505d00c8dba ("soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/fsl/qbman/bman.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/fsl/qbman/bman.c b/drivers/soc/fsl/qbman/bman.c
index f4fb527d83018..c5dd026fe889f 100644
--- a/drivers/soc/fsl/qbman/bman.c
+++ b/drivers/soc/fsl/qbman/bman.c
@@ -660,7 +660,7 @@ int bm_shutdown_pool(u32 bpid)
}
done:
put_affine_portal();
- return 0;
+ return err;
}
struct gen_pool *bm_bpalloc;
--
2.25.1
From: Marek Vasut <[email protected]>
[ Upstream commit 1ad6e36ec266cedb0d274aa13253ff1fb2eed4ba ]
The AV96 uses sdmmc2_d47_pins_c and sdmmc2_d47_sleep_pins_c, which
differ from sdmmc2_d47_pins_b and sdmmc2_d47_sleep_pins_b in one
pin, SDMMC2_D5, which is PA15 in the former and PA9 in the later.
The PA15 is correct on AV96, so fix this. This error is likely a
result of rebasing across the stm32mp1 DT pinctrl rework.
Fixes: 611325f68102 ("ARM: dts: stm32: Add eMMC attached to SDMMC2 on AV96")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
To: [email protected]
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 930202742a3f6..905cd7bb98cf0 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -295,9 +295,9 @@ &sdmmc1 {
&sdmmc2 {
pinctrl-names = "default", "opendrain", "sleep";
- pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
- pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
- pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
bus-width = <8>;
mmc-ddr-1_8v;
no-sd;
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit dbb8df5c2d27610a87b0168a8acc89d73fbfde94 ]
The default error branch of a series of pdev_is_gen calls
should free ndev just like what we've done in these calls.
Fixes: 26bfe3d0b227 ("ntb: intel: Add Icelake (gen4) support for Intel NTB")
Signed-off-by: Dinghao Liu <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ntb/hw/intel/ntb_hw_gen1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ntb/hw/intel/ntb_hw_gen1.c b/drivers/ntb/hw/intel/ntb_hw_gen1.c
index 423f9b8fbbcf5..fa561d455f7c8 100644
--- a/drivers/ntb/hw/intel/ntb_hw_gen1.c
+++ b/drivers/ntb/hw/intel/ntb_hw_gen1.c
@@ -1893,7 +1893,7 @@ static int intel_ntb_pci_probe(struct pci_dev *pdev,
goto err_init_dev;
} else {
rc = -EINVAL;
- goto err_ndev;
+ goto err_init_pci;
}
ndev_reset_unsafe_flags(ndev);
--
2.25.1
From: Al Grant <[email protected]>
[ Upstream commit f3d301c1f2f5676465cdf3259737ea19cc82731f ]
perf_event.h has macros that define the field offsets in the
data_src bitmask in perf records. The SNOOPX and REMOTE offsets
were both 37. These are distinct fields, and the bitfield layout
in perf_mem_data_src confirms that SNOOPX should be at offset 38.
Fixes: 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings")
Signed-off-by: Al Grant <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/perf_event.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index 7b2d6fc9e6ed7..dc33e3051819d 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -1155,7 +1155,7 @@ union perf_mem_data_src {
#define PERF_MEM_SNOOPX_FWD 0x01 /* forward */
/* 1 free */
-#define PERF_MEM_SNOOPX_SHIFT 37
+#define PERF_MEM_SNOOPX_SHIFT 38
/* locked instruction */
#define PERF_MEM_LOCK_NA 0x01 /* not available */
--
2.25.1
From: Marek Vasut <[email protected]>
[ Upstream commit 57592d2a98dbc3bde3ddc062e91a8486bdcb211e ]
The display PWM channel is number 3 (PWM2 CH4), make it so.
Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
To: [email protected]
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 9cf6d90fbf69f..e4e3c92eb30d3 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -25,7 +25,7 @@ clk_ext_audio_codec: clock-codec {
display_bl: display-bl {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
default-brightness-level = <8>;
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
--
2.25.1
From: Jernej Skrabec <[email protected]>
[ Upstream commit 3658a2b7f3e16c7053eb8d70657b94bb62c5a0f4 ]
DCDC1 regulator powers many different subsystems. While some of them can
work at 3.0 V, some of them can not. For example, VCC-HDMI can only work
between 3.24 V and 3.36 V. According to OS images provided by the board
manufacturer this regulator should be set to 3.3 V.
Set DCDC1 and DCDC1SW to 3.3 V in order to fix this.
Fixes: da7ac948fa93 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Ultra")
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 42d62d1ba1dc7..ea15073f0c79c 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -223,16 +223,16 @@ ®_aldo3 {
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
--
2.25.1
From: Hans de Goede <[email protected]>
[ Upstream commit 8058d69905058ec8f467a120b5ec5bb831ea67f3 ]
Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().
But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().
Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.
This fixes the Microsoft Surface Go 2 hanging at boot.
Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627
Reported-by: Rainer Finke <[email protected]>
Reported-by: Kieran Bingham <[email protected]>
Suggested-by: Maximilian Luz <[email protected]>
Tested-by: Kieran Bingham <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/i2c-core-acpi.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index 2ade99b105b91..bbf8dd491d245 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -264,6 +264,7 @@ static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
void i2c_acpi_register_devices(struct i2c_adapter *adap)
{
acpi_status status;
+ acpi_handle handle;
if (!has_acpi_companion(&adap->dev))
return;
@@ -274,6 +275,15 @@ void i2c_acpi_register_devices(struct i2c_adapter *adap)
adap, NULL);
if (ACPI_FAILURE(status))
dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+
+ if (!adap->dev.parent)
+ return;
+
+ handle = ACPI_HANDLE(adap->dev.parent);
+ if (!handle)
+ return;
+
+ acpi_walk_dep_device_list(handle);
}
const struct acpi_device_id *
@@ -729,7 +739,6 @@ int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
return -ENOMEM;
}
- acpi_walk_dep_device_list(handle);
return 0;
}
--
2.25.1
From: Pavel Machek <[email protected]>
[ Upstream commit e356c49c6cf0db3f00e1558749170bd56e47652d ]
Fix resource leak in error handling.
Signed-off-by: Pavel Machek (CIP) <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ccp/ccp-ops.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c
index 64112c736810e..7234b95241e91 100644
--- a/drivers/crypto/ccp/ccp-ops.c
+++ b/drivers/crypto/ccp/ccp-ops.c
@@ -1746,7 +1746,7 @@ ccp_run_sha_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
break;
default:
ret = -EINVAL;
- goto e_ctx;
+ goto e_data;
}
} else {
/* Stash the context */
--
2.25.1
From: Pavel Machek <[email protected]>
[ Upstream commit b28e32798c78a346788d412f1958f36bb760ec03 ]
Fix memory leak in node_probe.
Signed-off-by: Pavel Machek (CIP) <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/firewire/firedtv-fw.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/firewire/firedtv-fw.c b/drivers/media/firewire/firedtv-fw.c
index 3f1ca40b9b987..8a8585261bb80 100644
--- a/drivers/media/firewire/firedtv-fw.c
+++ b/drivers/media/firewire/firedtv-fw.c
@@ -272,8 +272,10 @@ static int node_probe(struct fw_unit *unit, const struct ieee1394_device_id *id)
name_len = fw_csr_string(unit->directory, CSR_MODEL,
name, sizeof(name));
- if (name_len < 0)
- return name_len;
+ if (name_len < 0) {
+ err = name_len;
+ goto fail_free;
+ }
for (i = ARRAY_SIZE(model_names); --i; )
if (strlen(model_names[i]) <= name_len &&
strncmp(name, model_names[i], name_len) == 0)
--
2.25.1
From: Juri Lelli <[email protected]>
[ Upstream commit a73f863af4ce9730795eab7097fb2102e6854365 ]
Commit:
765cc3a4b224e ("sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds")
made sched features static for !CONFIG_SCHED_DEBUG configurations, but
overlooked the CONFIG_SCHED_DEBUG=y and !CONFIG_JUMP_LABEL cases.
For the latter echoing changes to /sys/kernel/debug/sched_features has
the nasty effect of effectively changing what sched_features reports,
but without actually changing the scheduler behaviour (since different
translation units get different sysctl_sched_features).
Fix CONFIG_SCHED_DEBUG=y and !CONFIG_JUMP_LABEL configurations by properly
restructuring ifdefs.
Fixes: 765cc3a4b224e ("sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds")
Co-developed-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Juri Lelli <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Acked-by: Patrick Bellasi <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 2 +-
kernel/sched/sched.h | 13 ++++++++++---
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index f788cd61df212..1c68621743ac2 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -39,7 +39,7 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(sched_overutilized_tp);
DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
-#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_JUMP_LABEL)
+#ifdef CONFIG_SCHED_DEBUG
/*
* Debugging: various feature bits
*
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index c82857e2e288a..0b1485ac19c4e 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1600,7 +1600,7 @@ enum {
#undef SCHED_FEAT
-#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_JUMP_LABEL)
+#ifdef CONFIG_SCHED_DEBUG
/*
* To support run-time toggling of sched features, all the translation units
@@ -1608,6 +1608,7 @@ enum {
*/
extern const_debug unsigned int sysctl_sched_features;
+#ifdef CONFIG_JUMP_LABEL
#define SCHED_FEAT(name, enabled) \
static __always_inline bool static_branch_##name(struct static_key *key) \
{ \
@@ -1620,7 +1621,13 @@ static __always_inline bool static_branch_##name(struct static_key *key) \
extern struct static_key sched_feat_keys[__SCHED_FEAT_NR];
#define sched_feat(x) (static_branch_##x(&sched_feat_keys[__SCHED_FEAT_##x]))
-#else /* !(SCHED_DEBUG && CONFIG_JUMP_LABEL) */
+#else /* !CONFIG_JUMP_LABEL */
+
+#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
+
+#endif /* CONFIG_JUMP_LABEL */
+
+#else /* !SCHED_DEBUG */
/*
* Each translation unit has its own copy of sysctl_sched_features to allow
@@ -1636,7 +1643,7 @@ static const_debug __maybe_unused unsigned int sysctl_sched_features =
#define sched_feat(x) !!(sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
-#endif /* SCHED_DEBUG && CONFIG_JUMP_LABEL */
+#endif /* SCHED_DEBUG */
extern struct static_key_false sched_numa_balancing;
extern struct static_key_false sched_schedstats;
--
2.25.1
From: Oliver Neukum <[email protected]>
[ Upstream commit a8be80053ea74bd9c3f9a3810e93b802236d6498 ]
If you do sanity checks, you should do them for both endpoints.
Hence introduce checking for endpoint type for the output
endpoint, too.
Reported-by: [email protected]
Signed-off-by: Oliver Neukum <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/ati_remote.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
index 9cdef17b4793f..c12dda73cdd53 100644
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -835,6 +835,10 @@ static int ati_remote_probe(struct usb_interface *interface,
err("%s: endpoint_in message size==0? \n", __func__);
return -ENODEV;
}
+ if (!usb_endpoint_is_int_out(endpoint_out)) {
+ err("%s: Unexpected endpoint_out\n", __func__);
+ return -ENODEV;
+ }
ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
--
2.25.1
From: Tetsuo Handa <[email protected]>
[ Upstream commit f4ac712e4fe009635344b9af5d890fe25fcc8c0d ]
syzbot is reporting unkillable task [1], for the caller is failing to
handle a corrupted filesystem image which attempts to access beyond
the end of the device. While we need to fix the caller, flooding the
console with handle_bad_sector() message is unlikely useful.
[1] https://syzkaller.appspot.com/bug?id=f1f49fb971d7a3e01bd8ab8cff2ff4572ccf3092
Signed-off-by: Tetsuo Handa <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-core.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 619a3dcd3f5e7..8d6435b731186 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -798,11 +798,10 @@ static void handle_bad_sector(struct bio *bio, sector_t maxsector)
{
char b[BDEVNAME_SIZE];
- printk(KERN_INFO "attempt to access beyond end of device\n");
- printk(KERN_INFO "%s: rw=%d, want=%Lu, limit=%Lu\n",
- bio_devname(bio, b), bio->bi_opf,
- (unsigned long long)bio_end_sector(bio),
- (long long)maxsector);
+ pr_info_ratelimited("attempt to access beyond end of device\n"
+ "%s: rw=%d, want=%llu, limit=%llu\n",
+ bio_devname(bio, b), bio->bi_opf,
+ bio_end_sector(bio), maxsector);
}
#ifdef CONFIG_FAIL_MAKE_REQUEST
--
2.25.1
From: Mark Mossberg <[email protected]>
[ Upstream commit 238c91115cd05c71447ea071624a4c9fe661f970 ]
Printing "Bad RIP value" if copy_code() fails can be misleading for
userspace pointers, since copy_code() can fail if the instruction
pointer is valid but the code is paged out. This is because copy_code()
calls copy_from_user_nmi() for userspace pointers, which disables page
fault handling.
This is reproducible in OOM situations, where it's plausible that the
code may be reclaimed in the time between entry into the kernel and when
this message is printed. This leaves a misleading log in dmesg that
suggests instruction pointer corruption has occurred, which may alarm
users.
Change the message to state the error condition more precisely.
[ bp: Massage a bit. ]
Signed-off-by: Mark Mossberg <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/dumpstack.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 7401cc12c3ccf..42679610c9bea 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -115,7 +115,8 @@ void show_opcodes(struct pt_regs *regs, const char *loglvl)
unsigned long prologue = regs->ip - PROLOGUE_SIZE;
if (copy_code(regs, opcodes, prologue, sizeof(opcodes))) {
- printk("%sCode: Bad RIP value.\n", loglvl);
+ printk("%sCode: Unable to access opcode bytes at RIP 0x%lx.\n",
+ loglvl, prologue);
} else {
printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %"
__stringify(EPILOGUE_SIZE) "ph\n", loglvl, opcodes,
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit 98fae901c8883640202802174a4bd70a1b9118bd ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/vsp1/vsp1_drv.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index c650e45bb0ad1..dc62533cf32ce 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -562,7 +562,12 @@ int vsp1_device_get(struct vsp1_device *vsp1)
int ret;
ret = pm_runtime_get_sync(vsp1->dev);
- return ret < 0 ? ret : 0;
+ if (ret < 0) {
+ pm_runtime_put_noidle(vsp1->dev);
+ return ret;
+ }
+
+ return 0;
}
/*
@@ -845,12 +850,12 @@ static int vsp1_probe(struct platform_device *pdev)
/* Configure device parameters based on the version register. */
pm_runtime_enable(&pdev->dev);
- ret = pm_runtime_get_sync(&pdev->dev);
+ ret = vsp1_device_get(vsp1);
if (ret < 0)
goto done;
vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION);
- pm_runtime_put_sync(&pdev->dev);
+ vsp1_device_put(vsp1);
for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) {
if ((vsp1->version & VI6_IP_VERSION_MODEL_MASK) ==
--
2.25.1
From: Aditya Pakki <[email protected]>
[ Upstream commit 57cc666d36adc7b45e37ba4cd7bc4e44ec4c43d7 ]
delta_run_work() calls delta_get_sync() that increments
the reference counter. In case of failure, decrement the reference
count by calling delta_put_autosuspend().
Signed-off-by: Aditya Pakki <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/sti/delta/delta-v4l2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/sti/delta/delta-v4l2.c b/drivers/media/platform/sti/delta/delta-v4l2.c
index 2503224eeee51..c691b3d81549d 100644
--- a/drivers/media/platform/sti/delta/delta-v4l2.c
+++ b/drivers/media/platform/sti/delta/delta-v4l2.c
@@ -954,8 +954,10 @@ static void delta_run_work(struct work_struct *work)
/* enable the hardware */
if (!dec->pm) {
ret = delta_get_sync(ctx);
- if (ret)
+ if (ret) {
+ delta_put_autosuspend(ctx);
goto err;
+ }
}
/* decode this access unit */
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit 6f4432bae9f2d12fc1815b5e26cc07e69bcad0df ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/sti/hva/hva-hw.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index 401aaafa17109..bb13348be0832 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -272,6 +272,7 @@ static unsigned long int hva_hw_get_ip_version(struct hva_dev *hva)
if (pm_runtime_get_sync(dev) < 0) {
dev_err(dev, "%s failed to get pm_runtime\n", HVA_PREFIX);
+ pm_runtime_put_noidle(dev);
mutex_unlock(&hva->protect_mutex);
return -EFAULT;
}
@@ -553,6 +554,7 @@ void hva_hw_dump_regs(struct hva_dev *hva, struct seq_file *s)
if (pm_runtime_get_sync(dev) < 0) {
seq_puts(s, "Cannot wake up IP\n");
+ pm_runtime_put_noidle(dev);
mutex_unlock(&hva->protect_mutex);
return;
}
--
2.25.1
From: Michal Simek <[email protected]>
[ Upstream commit 35292518cb0a626fcdcabf739aed75060a018ab5 ]
DT binding permits only one compatible string which was decribed in past by
commit 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq
Ultrascale+ MPSoC").
The commit aea37006e183 ("dt-bindings: i2c: cadence: Migrate i2c-cadence
documentation to YAML") has converted binding to yaml and the following
issues is reported:
...: i2c@ff030000: compatible: Additional items are not allowed
('cdns,i2c-r1p10' was unexpected)
From schema:
.../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds
...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too
long
The commit c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string")
has added the second compatible string but without removing origin one.
The patch is only keeping one compatible string "cdns,i2c-r1p14".
Fixes: c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string")
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 9174ddc76bdc3..b8d04c5748bf3 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -500,7 +500,7 @@ gpio: gpio@ff0a0000 {
};
i2c0: i2c@ff020000 {
- compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
@@ -511,7 +511,7 @@ i2c0: i2c@ff020000 {
};
i2c1: i2c@ff030000 {
- compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit dbd2f2dc025f9be8ae063e4f270099677238f620 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Fabien Dessenne <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
index af2d5eb782cee..e1d150584bdc2 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
@@ -1371,7 +1371,7 @@ static int bdisp_probe(struct platform_device *pdev)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
dev_err(dev, "failed to set PM\n");
- goto err_dbg;
+ goto err_pm;
}
/* Filters */
@@ -1399,7 +1399,6 @@ static int bdisp_probe(struct platform_device *pdev)
bdisp_hw_free_filters(bdisp->dev);
err_pm:
pm_runtime_put(dev);
-err_dbg:
bdisp_debugfs_remove(bdisp);
err_v4l2:
v4l2_device_unregister(&bdisp->v4l2_dev);
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit c47f7c779ef0458a58583f00c9ed71b7f5a4d0a2 ]
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/exynos4-is/media-dev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 2f90607c3797d..a07d796f63df0 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -484,8 +484,10 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
return -ENXIO;
ret = pm_runtime_get_sync(fmd->pmf);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put(fmd->pmf);
return ret;
+ }
fmd->num_sensors = 0;
--
2.25.1
From: Borislav Petkov <[email protected]>
[ Upstream commit e100777016fdf6ec3a9d7c1773b15a2b5eca6c55 ]
They do get called from the #MC handler which is already marked
"noinstr".
Commit
e2def7d49d08 ("x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR")
already got rid of the instrumentation in the MSR accessors, fix the
annotation now too, in order to get rid of:
vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 14e4b4d17ee5b..d8dca24feccbe 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -371,16 +371,25 @@ static int msr_to_offset(u32 msr)
}
/* MSR access wrappers used for error injection */
-static u64 mce_rdmsrl(u32 msr)
+static noinstr u64 mce_rdmsrl(u32 msr)
{
u64 v;
if (__this_cpu_read(injectm.finished)) {
- int offset = msr_to_offset(msr);
+ int offset;
+ u64 ret;
+ instrumentation_begin();
+
+ offset = msr_to_offset(msr);
if (offset < 0)
- return 0;
- return *(u64 *)((char *)this_cpu_ptr(&injectm) + offset);
+ ret = 0;
+ else
+ ret = *(u64 *)((char *)this_cpu_ptr(&injectm) + offset);
+
+ instrumentation_end();
+
+ return ret;
}
if (rdmsrl_safe(msr, &v)) {
@@ -396,13 +405,19 @@ static u64 mce_rdmsrl(u32 msr)
return v;
}
-static void mce_wrmsrl(u32 msr, u64 v)
+static noinstr void mce_wrmsrl(u32 msr, u64 v)
{
if (__this_cpu_read(injectm.finished)) {
- int offset = msr_to_offset(msr);
+ int offset;
+ instrumentation_begin();
+
+ offset = msr_to_offset(msr);
if (offset >= 0)
*(u64 *)((char *)this_cpu_ptr(&injectm) + offset) = v;
+
+ instrumentation_end();
+
return;
}
wrmsrl(msr, v);
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit dafa3605fe60d5a61239d670919b2a36e712481e ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Also, call pm_runtime_disable() when pm_runtime_get_sync() returns
an error code.
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s3c-camif/camif-core.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/s3c-camif/camif-core.c b/drivers/media/platform/s3c-camif/camif-core.c
index c6fbcd7036d6d..ee624804862e2 100644
--- a/drivers/media/platform/s3c-camif/camif-core.c
+++ b/drivers/media/platform/s3c-camif/camif-core.c
@@ -464,7 +464,7 @@ static int s3c_camif_probe(struct platform_device *pdev)
ret = camif_media_dev_init(camif);
if (ret < 0)
- goto err_alloc;
+ goto err_pm;
ret = camif_register_sensor(camif);
if (ret < 0)
@@ -498,10 +498,9 @@ static int s3c_camif_probe(struct platform_device *pdev)
media_device_unregister(&camif->media_dev);
media_device_cleanup(&camif->media_dev);
camif_unregister_media_entities(camif);
-err_alloc:
+err_pm:
pm_runtime_put(dev);
pm_runtime_disable(dev);
-err_pm:
camif_clk_put(camif);
err_clk:
s3c_camif_unregister_subdev(camif);
--
2.25.1
From: Martin Blumenstingl <[email protected]>
[ Upstream commit 737e7610b545cc901a9696083c1824a7104b8d1b ]
The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
#define INT_MALI_GP AM_IRQ(160)
#define INT_MALI_GP_MMU AM_IRQ(161)
#define INT_MALI_PP AM_IRQ(162)
#define INT_MALI_PMU AM_IRQ(163)
#define INT_MALI_PP0 AM_IRQ(164)
#define INT_MALI_PP0_MMU AM_IRQ(165)
#define INT_MALI_PP1 AM_IRQ(166)
#define INT_MALI_PP1_MMU AM_IRQ(167)
#define INT_MALI_PP2 AM_IRQ(168)
#define INT_MALI_PP2_MMU AM_IRQ(169)
#define INT_MALI_PP3 AM_IRQ(170)
#define INT_MALI_PP3_MMU AM_IRQ(171)
#define INT_MALI_PP4 AM_IRQ(172)
#define INT_MALI_PP4_MMU AM_IRQ(173)
#define INT_MALI_PP5 AM_IRQ(174)
#define INT_MALI_PP5_MMU AM_IRQ(175)
#define INT_MALI_PP6 AM_IRQ(176)
#define INT_MALI_PP6_MMU AM_IRQ(177)
#define INT_MALI_PP7 AM_IRQ(178)
#define INT_MALI_PP7_MMU AM_IRQ(179)
However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU
Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <[email protected]>
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Kevin Hilman <[email protected]>
Tested-by: thomas graichen <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/meson8.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index eedb92526968a..a4ab8b96d0eb6 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -239,8 +239,6 @@ mali: gpu@c0000 {
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
--
2.25.1
From: Vasant Hegde <[email protected]>
[ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ]
Every dump reported by OPAL is exported to userspace through a sysfs
interface and notified using kobject_uevent(). The userspace daemon
(opal_errd) then reads the dump and acknowledges that the dump is
saved safely to disk. Once acknowledged the kernel removes the
respective sysfs file entry causing respective resources to be
released including kobject.
However it's possible the userspace daemon may already be scanning
dump entries when a new sysfs dump entry is created by the kernel.
User daemon may read this new entry and ack it even before kernel can
notify userspace about it through kobject_uevent() call. If that
happens then we have a potential race between
dump_ack_store->kobject_put() and kobject_uevent which can lead to
use-after-free of a kernfs object resulting in a kernel crash.
This patch fixes this race by protecting the sysfs file
creation/notification by holding a reference count on kobject until we
safely send kobject_uevent().
The function create_dump_obj() returns the dump object which if used
by caller function will end up in use-after-free problem again.
However, the return value of create_dump_obj() function isn't being
used today and there is no need as well. Hence change it to return
void to make this fix complete.
Fixes: c7e64b9ce04a ("powerpc/powernv Platform dump interface")
Signed-off-by: Vasant Hegde <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/powernv/opal-dump.c | 41 +++++++++++++++-------
1 file changed, 29 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/opal-dump.c b/arch/powerpc/platforms/powernv/opal-dump.c
index 543c816fa99ef..0e6693bacb7e7 100644
--- a/arch/powerpc/platforms/powernv/opal-dump.c
+++ b/arch/powerpc/platforms/powernv/opal-dump.c
@@ -318,15 +318,14 @@ static ssize_t dump_attr_read(struct file *filep, struct kobject *kobj,
return count;
}
-static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
- uint32_t type)
+static void create_dump_obj(uint32_t id, size_t size, uint32_t type)
{
struct dump_obj *dump;
int rc;
dump = kzalloc(sizeof(*dump), GFP_KERNEL);
if (!dump)
- return NULL;
+ return;
dump->kobj.kset = dump_kset;
@@ -346,21 +345,39 @@ static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
rc = kobject_add(&dump->kobj, NULL, "0x%x-0x%x", type, id);
if (rc) {
kobject_put(&dump->kobj);
- return NULL;
+ return;
}
+ /*
+ * As soon as the sysfs file for this dump is created/activated there is
+ * a chance the opal_errd daemon (or any userspace) might read and
+ * acknowledge the dump before kobject_uevent() is called. If that
+ * happens then there is a potential race between
+ * dump_ack_store->kobject_put() and kobject_uevent() which leads to a
+ * use-after-free of a kernfs object resulting in a kernel crash.
+ *
+ * To avoid that, we need to take a reference on behalf of the bin file,
+ * so that our reference remains valid while we call kobject_uevent().
+ * We then drop our reference before exiting the function, leaving the
+ * bin file to drop the last reference (if it hasn't already).
+ */
+
+ /* Take a reference for the bin file */
+ kobject_get(&dump->kobj);
rc = sysfs_create_bin_file(&dump->kobj, &dump->dump_attr);
- if (rc) {
+ if (rc == 0) {
+ kobject_uevent(&dump->kobj, KOBJ_ADD);
+
+ pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
+ __func__, dump->id, dump->size);
+ } else {
+ /* Drop reference count taken for bin file */
kobject_put(&dump->kobj);
- return NULL;
}
- pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
- __func__, dump->id, dump->size);
-
- kobject_uevent(&dump->kobj, KOBJ_ADD);
-
- return dump;
+ /* Drop our reference */
+ kobject_put(&dump->kobj);
+ return;
}
static irqreturn_t process_dump(int irq, void *data)
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit d912a1d9e9afe69c6066c1ceb6bfc09063074075 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/sti/hva/hva-hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index bb13348be0832..43f279e2a6a38 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -389,7 +389,7 @@ int hva_hw_probe(struct platform_device *pdev, struct hva_dev *hva)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
dev_err(dev, "%s failed to set PM\n", HVA_PREFIX);
- goto err_clk;
+ goto err_pm;
}
/* check IP hardware version */
--
2.25.1
From: zhenwei pi <[email protected]>
[ Upstream commit 85bd23f3dc09a2ae9e56885420e52c54bf983713 ]
When connecting a controller with a zero kato value using the following
command line
nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0
the warning below can be reproduced:
WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
mod_delayed_work_on+0x59/0x90
nvmet_update_cc+0xee/0x100 [nvmet]
nvmet_execute_prop_set+0x72/0x80 [nvmet]
nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
...
This is caused by queuing up an uninitialized work. Althrough the
keep-alive timer is disabled during allocating the controller (fixed in
0d3b6a8d213a), ka_work still has a chance to run (called by
nvmet_start_ctrl).
Fixes: 0d3b6a8d213a ("nvmet: Disable keep-alive timer when kato is cleared to 0h")
Signed-off-by: zhenwei pi <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 58b035cc67a01..75ed95a250fb5 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -1142,7 +1142,8 @@ static void nvmet_start_ctrl(struct nvmet_ctrl *ctrl)
* in case a host died before it enabled the controller. Hence, simply
* reset the keep alive timer when the controller is enabled.
*/
- mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
+ if (ctrl->kato)
+ mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
}
static void nvmet_clear_ctrl(struct nvmet_ctrl *ctrl)
--
2.25.1
From: Xiaolong Huang <[email protected]>
[ Upstream commit 7b817585b730665126b45df5508dd69526448bc8 ]
In bttv_probe if some functions such as pci_enable_device,
pci_set_dma_mask and request_mem_region fails the allocated
memory for btv should be released.
Signed-off-by: Xiaolong Huang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/bt8xx/bttv-driver.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c
index 9144f795fb933..b721720f9845a 100644
--- a/drivers/media/pci/bt8xx/bttv-driver.c
+++ b/drivers/media/pci/bt8xx/bttv-driver.c
@@ -4013,11 +4013,13 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
btv->id = dev->device;
if (pci_enable_device(dev)) {
pr_warn("%d: Can't enable device\n", btv->c.nr);
- return -EIO;
+ result = -EIO;
+ goto free_mem;
}
if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
pr_warn("%d: No suitable DMA available\n", btv->c.nr);
- return -EIO;
+ result = -EIO;
+ goto free_mem;
}
if (!request_mem_region(pci_resource_start(dev,0),
pci_resource_len(dev,0),
@@ -4025,7 +4027,8 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
pr_warn("%d: can't request iomem (0x%llx)\n",
btv->c.nr,
(unsigned long long)pci_resource_start(dev, 0));
- return -EBUSY;
+ result = -EBUSY;
+ goto free_mem;
}
pci_set_master(dev);
pci_set_command(dev);
@@ -4211,6 +4214,10 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
release_mem_region(pci_resource_start(btv->c.pci,0),
pci_resource_len(btv->c.pci,0));
pci_disable_device(btv->c.pci);
+
+free_mem:
+ bttvs[btv->c.nr] = NULL;
+ kfree(btv);
return result;
}
--
2.25.1
From: Vitaly Kuznetsov <[email protected]>
[ Upstream commit 77377064c3a94911339f13ce113b3abf265e06da ]
During shutdown the IOAPIC trigger mode is reset to edge triggered
while the vfio-pci INTx is still registered with a resampler.
This allows us to get into an infinite loop:
ioapic_set_irq
-> ioapic_lazy_update_eoi
-> kvm_ioapic_update_eoi_one
-> kvm_notify_acked_irq
-> kvm_notify_acked_gsi
-> (via irq_acked fn ptr) irqfd_resampler_ack
-> kvm_set_irq
-> (via set fn ptr) kvm_set_ioapic_irq
-> kvm_ioapic_set_irq
-> ioapic_set_irq
Commit 8be8f932e3db ("kvm: ioapic: Restrict lazy EOI update to
edge-triggered interrupts", 2020-05-04) acknowledges that this recursion
loop exists and tries to avoid it at the call to ioapic_lazy_update_eoi,
but at this point the scenario is already set, we have an edge interrupt
with resampler on the same gsi.
Fortunately, the only user of irq ack notifiers (in addition to resamplefd)
is i8254 timer interrupt reinjection. These are edge-triggered, so in
principle they would need the call to kvm_ioapic_update_eoi_one from
ioapic_lazy_update_eoi, but they already disable AVIC(*), so they don't
need the lazy EOI behavior. Therefore, remove the call to
kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi.
This fixes CVE-2020-27152. Note that this issue cannot happen with
SR-IOV assigned devices because virtual functions do not have INTx,
only MSI.
Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI")
Suggested-by: Paolo Bonzini <[email protected]>
Tested-by: Alex Williamson <[email protected]>
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/ioapic.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index d057376bd3d33..698969e18fe35 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -197,12 +197,9 @@ static void ioapic_lazy_update_eoi(struct kvm_ioapic *ioapic, int irq)
/*
* If no longer has pending EOI in LAPICs, update
- * EOI for this vetor.
+ * EOI for this vector.
*/
rtc_irq_eoi(ioapic, vcpu, entry->fields.vector);
- kvm_ioapic_update_eoi_one(vcpu, ioapic,
- entry->fields.trig_mode,
- irq);
break;
}
}
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit bbe516e976fce538db96bd2b7287df942faa14a3 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced. For other error
paths after this call, things are the same.
Fix this by adding pm_runtime_put_noidle() after 'err_runtime_disable'
label. But in this case, the error path after pm_runtime_put_sync()
will decrease PM usage counter twice. Thus add an extra
pm_runtime_get_noresume() in this path to balance PM counter.
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index bfcaba37d60fe..321ad77cb6cf4 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -289,8 +289,10 @@ static int venus_probe(struct platform_device *pdev)
goto err_core_deinit;
ret = pm_runtime_put_sync(dev);
- if (ret)
+ if (ret) {
+ pm_runtime_get_noresume(dev);
goto err_dev_unregister;
+ }
return 0;
@@ -301,6 +303,7 @@ static int venus_probe(struct platform_device *pdev)
err_venus_shutdown:
venus_shutdown(core);
err_runtime_disable:
+ pm_runtime_put_noidle(dev);
pm_runtime_set_suspended(dev);
pm_runtime_disable(dev);
hfi_destroy(core);
--
2.25.1
From: Thomas Pedersen <[email protected]>
[ Upstream commit 8b783d104e7f40684333d2ec155fac39219beb2f ]
Even though a driver or mac80211 shouldn't produce a
legacy bitrate if sband->bitrates doesn't exist, don't
crash if that is the case either.
This fixes a kernel panic if station dump is run before
last_rate can be updated with a data frame when
sband->bitrates is missing (eg. in S1G bands).
Signed-off-by: Thomas Pedersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/cfg.c | 3 ++-
net/mac80211/sta_info.c | 4 ++++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 1079a07e43e49..d74cfec685477 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -709,7 +709,8 @@ void sta_set_rate_info_tx(struct sta_info *sta,
u16 brate;
sband = ieee80211_get_sband(sta->sdata);
- if (sband) {
+ WARN_ON_ONCE(sband && !sband->bitrates);
+ if (sband && sband->bitrates) {
brate = sband->bitrates[rate->idx].bitrate;
rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift);
}
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 05e966f1609e2..b93916c382cdb 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -2122,6 +2122,10 @@ static void sta_stats_decode_rate(struct ieee80211_local *local, u32 rate,
int rate_idx = STA_STATS_GET(LEGACY_IDX, rate);
sband = local->hw.wiphy->bands[band];
+
+ if (WARN_ON_ONCE(!sband->bitrates))
+ break;
+
brate = sband->bitrates[rate_idx].bitrate;
if (rinfo->bw == RATE_INFO_BW_5)
shift = 2;
--
2.25.1
From: Jérôme Pouiller <[email protected]>
[ Upstream commit 8d350c14ee5eb62ecd40b0991248bfbce511954d ]
As expected, when the device detect a MMIC error, it returns a specific
status. However, it also strip IV from the frame (don't ask me why).
So, with the current code, mac80211 detects a corrupted frame and it
drops it before it handle the MMIC error. The expected behavior would be
to detect MMIC error then to renegotiate the EAP session.
So, this patch correctly informs mac80211 that IV is not available. So,
mac80211 correctly takes into account the MMIC error.
Signed-off-by: Jérôme Pouiller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/wfx/data_rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/wfx/data_rx.c b/drivers/staging/wfx/data_rx.c
index 0e959ebc38b56..a9fb5165b33d9 100644
--- a/drivers/staging/wfx/data_rx.c
+++ b/drivers/staging/wfx/data_rx.c
@@ -80,7 +80,7 @@ void wfx_rx_cb(struct wfx_vif *wvif,
goto drop;
if (arg->status == HIF_STATUS_RX_FAIL_MIC)
- hdr->flag |= RX_FLAG_MMIC_ERROR;
+ hdr->flag |= RX_FLAG_MMIC_ERROR | RX_FLAG_IV_STRIPPED;
else if (arg->status)
goto drop;
--
2.25.1
From: Song Liu <[email protected]>
[ Upstream commit 39d8f0d1026a990604770a658708f5845f7dbec0 ]
Recent improvements in LOCKDEP highlighted a potential A-A deadlock with
pcpu_freelist in NMI:
./tools/testing/selftests/bpf/test_progs -t stacktrace_build_id_nmi
[ 18.984807] ================================
[ 18.984807] WARNING: inconsistent lock state
[ 18.984808] 5.9.0-rc6-01771-g1466de1330e1 #2967 Not tainted
[ 18.984809] --------------------------------
[ 18.984809] inconsistent {INITIAL USE} -> {IN-NMI} usage.
[ 18.984810] test_progs/1990 [HC2[2]:SC0[0]:HE0:SE1] takes:
[ 18.984810] ffffe8ffffc219c0 (&head->lock){....}-{2:2}, at: __pcpu_freelist_pop+0xe3/0x180
[ 18.984813] {INITIAL USE} state was registered at:
[ 18.984814] lock_acquire+0x175/0x7c0
[ 18.984814] _raw_spin_lock+0x2c/0x40
[ 18.984815] __pcpu_freelist_pop+0xe3/0x180
[ 18.984815] pcpu_freelist_pop+0x31/0x40
[ 18.984816] htab_map_alloc+0xbbf/0xf40
[ 18.984816] __do_sys_bpf+0x5aa/0x3ed0
[ 18.984817] do_syscall_64+0x2d/0x40
[ 18.984818] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 18.984818] irq event stamp: 12
[...]
[ 18.984822] other info that might help us debug this:
[ 18.984823] Possible unsafe locking scenario:
[ 18.984823]
[ 18.984824] CPU0
[ 18.984824] ----
[ 18.984824] lock(&head->lock);
[ 18.984826] <Interrupt>
[ 18.984826] lock(&head->lock);
[ 18.984827]
[ 18.984828] *** DEADLOCK ***
[ 18.984828]
[ 18.984829] 2 locks held by test_progs/1990:
[...]
[ 18.984838] <NMI>
[ 18.984838] dump_stack+0x9a/0xd0
[ 18.984839] lock_acquire+0x5c9/0x7c0
[ 18.984839] ? lock_release+0x6f0/0x6f0
[ 18.984840] ? __pcpu_freelist_pop+0xe3/0x180
[ 18.984840] _raw_spin_lock+0x2c/0x40
[ 18.984841] ? __pcpu_freelist_pop+0xe3/0x180
[ 18.984841] __pcpu_freelist_pop+0xe3/0x180
[ 18.984842] pcpu_freelist_pop+0x17/0x40
[ 18.984842] ? lock_release+0x6f0/0x6f0
[ 18.984843] __bpf_get_stackid+0x534/0xaf0
[ 18.984843] bpf_prog_1fd9e30e1438d3c5_oncpu+0x73/0x350
[ 18.984844] bpf_overflow_handler+0x12f/0x3f0
This is because pcpu_freelist_head.lock is accessed in both NMI and
non-NMI context. Fix this issue by using raw_spin_trylock() in NMI.
Since NMI interrupts non-NMI context, when NMI context tries to lock the
raw_spinlock, non-NMI context of the same CPU may already have locked a
lock and is blocked from unlocking the lock. For a system with N CPUs,
there could be N NMIs at the same time, and they may block N non-NMI
raw_spinlocks. This is tricky for pcpu_freelist_push(), where unlike
_pop(), failing _push() means leaking memory. This issue is more likely to
trigger in non-SMP system.
Fix this issue with an extra list, pcpu_freelist.extralist. The extralist
is primarily used to take _push() when raw_spin_trylock() failed on all
the per CPU lists. It should be empty most of the time. The following
table summarizes the behavior of pcpu_freelist in NMI and non-NMI:
non-NMI pop(): use _lock(); check per CPU lists first;
if all per CPU lists are empty, check extralist;
if extralist is empty, return NULL.
non-NMI push(): use _lock(); only push to per CPU lists.
NMI pop(): use _trylock(); check per CPU lists first;
if all per CPU lists are locked or empty, check extralist;
if extralist is locked or empty, return NULL.
NMI push(): use _trylock(); check per CPU lists first;
if all per CPU lists are locked; try push to extralist;
if extralist is also locked, keep trying on per CPU lists.
Reported-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/percpu_freelist.c | 101 +++++++++++++++++++++++++++++++++--
kernel/bpf/percpu_freelist.h | 1 +
2 files changed, 97 insertions(+), 5 deletions(-)
diff --git a/kernel/bpf/percpu_freelist.c b/kernel/bpf/percpu_freelist.c
index b367430e611c7..3d897de890612 100644
--- a/kernel/bpf/percpu_freelist.c
+++ b/kernel/bpf/percpu_freelist.c
@@ -17,6 +17,8 @@ int pcpu_freelist_init(struct pcpu_freelist *s)
raw_spin_lock_init(&head->lock);
head->first = NULL;
}
+ raw_spin_lock_init(&s->extralist.lock);
+ s->extralist.first = NULL;
return 0;
}
@@ -40,12 +42,50 @@ static inline void ___pcpu_freelist_push(struct pcpu_freelist_head *head,
raw_spin_unlock(&head->lock);
}
+static inline bool pcpu_freelist_try_push_extra(struct pcpu_freelist *s,
+ struct pcpu_freelist_node *node)
+{
+ if (!raw_spin_trylock(&s->extralist.lock))
+ return false;
+
+ pcpu_freelist_push_node(&s->extralist, node);
+ raw_spin_unlock(&s->extralist.lock);
+ return true;
+}
+
+static inline void ___pcpu_freelist_push_nmi(struct pcpu_freelist *s,
+ struct pcpu_freelist_node *node)
+{
+ int cpu, orig_cpu;
+
+ orig_cpu = cpu = raw_smp_processor_id();
+ while (1) {
+ struct pcpu_freelist_head *head;
+
+ head = per_cpu_ptr(s->freelist, cpu);
+ if (raw_spin_trylock(&head->lock)) {
+ pcpu_freelist_push_node(head, node);
+ raw_spin_unlock(&head->lock);
+ return;
+ }
+ cpu = cpumask_next(cpu, cpu_possible_mask);
+ if (cpu >= nr_cpu_ids)
+ cpu = 0;
+
+ /* cannot lock any per cpu lock, try extralist */
+ if (cpu == orig_cpu &&
+ pcpu_freelist_try_push_extra(s, node))
+ return;
+ }
+}
+
void __pcpu_freelist_push(struct pcpu_freelist *s,
struct pcpu_freelist_node *node)
{
- struct pcpu_freelist_head *head = this_cpu_ptr(s->freelist);
-
- ___pcpu_freelist_push(head, node);
+ if (in_nmi())
+ ___pcpu_freelist_push_nmi(s, node);
+ else
+ ___pcpu_freelist_push(this_cpu_ptr(s->freelist), node);
}
void pcpu_freelist_push(struct pcpu_freelist *s,
@@ -81,7 +121,7 @@ void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
}
}
-struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *s)
+static struct pcpu_freelist_node *___pcpu_freelist_pop(struct pcpu_freelist *s)
{
struct pcpu_freelist_head *head;
struct pcpu_freelist_node *node;
@@ -102,8 +142,59 @@ struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *s)
if (cpu >= nr_cpu_ids)
cpu = 0;
if (cpu == orig_cpu)
- return NULL;
+ break;
+ }
+
+ /* per cpu lists are all empty, try extralist */
+ raw_spin_lock(&s->extralist.lock);
+ node = s->extralist.first;
+ if (node)
+ s->extralist.first = node->next;
+ raw_spin_unlock(&s->extralist.lock);
+ return node;
+}
+
+static struct pcpu_freelist_node *
+___pcpu_freelist_pop_nmi(struct pcpu_freelist *s)
+{
+ struct pcpu_freelist_head *head;
+ struct pcpu_freelist_node *node;
+ int orig_cpu, cpu;
+
+ orig_cpu = cpu = raw_smp_processor_id();
+ while (1) {
+ head = per_cpu_ptr(s->freelist, cpu);
+ if (raw_spin_trylock(&head->lock)) {
+ node = head->first;
+ if (node) {
+ head->first = node->next;
+ raw_spin_unlock(&head->lock);
+ return node;
+ }
+ raw_spin_unlock(&head->lock);
+ }
+ cpu = cpumask_next(cpu, cpu_possible_mask);
+ if (cpu >= nr_cpu_ids)
+ cpu = 0;
+ if (cpu == orig_cpu)
+ break;
}
+
+ /* cannot pop from per cpu lists, try extralist */
+ if (!raw_spin_trylock(&s->extralist.lock))
+ return NULL;
+ node = s->extralist.first;
+ if (node)
+ s->extralist.first = node->next;
+ raw_spin_unlock(&s->extralist.lock);
+ return node;
+}
+
+struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *s)
+{
+ if (in_nmi())
+ return ___pcpu_freelist_pop_nmi(s);
+ return ___pcpu_freelist_pop(s);
}
struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
diff --git a/kernel/bpf/percpu_freelist.h b/kernel/bpf/percpu_freelist.h
index fbf8a8a289791..3c76553cfe571 100644
--- a/kernel/bpf/percpu_freelist.h
+++ b/kernel/bpf/percpu_freelist.h
@@ -13,6 +13,7 @@ struct pcpu_freelist_head {
struct pcpu_freelist {
struct pcpu_freelist_head __percpu *freelist;
+ struct pcpu_freelist_head extralist;
};
struct pcpu_freelist_node {
--
2.25.1
From: Rustam Kovhaev <[email protected]>
[ Upstream commit 4f8c94022f0bc3babd0a124c0a7dcdd7547bd94e ]
Number of bytes allocated for mft record should be equal to the mft record
size stored in ntfs superblock as reported by syzbot, userspace might
trigger out-of-bounds read by dereferencing ctx->attr in ntfs_attr_find()
Reported-by: [email protected]
Signed-off-by: Rustam Kovhaev <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: [email protected]
Acked-by: Anton Altaparmakov <[email protected]>
Link: https://syzkaller.appspot.com/bug?extid=aed06913f36eff9b544e
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ntfs/inode.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index d4359a1df3d5e..84933a0af49b6 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -1809,6 +1809,12 @@ int ntfs_read_inode_mount(struct inode *vi)
brelse(bh);
}
+ if (le32_to_cpu(m->bytes_allocated) != vol->mft_record_size) {
+ ntfs_error(sb, "Incorrect mft record size %u in superblock, should be %u.",
+ le32_to_cpu(m->bytes_allocated), vol->mft_record_size);
+ goto err_out;
+ }
+
/* Apply the mst fixups. */
if (post_read_mst_fixup((NTFS_RECORD*)m, vol->mft_record_size)) {
/* FIXME: Try to use the $MFTMirr now. */
--
2.25.1
From: Tzu-En Huang <[email protected]>
[ Upstream commit ee755732b7a16af018daa77d9562d2493fb7092f ]
The vht capability of MAX_MPDU_LENGTH is 11454 in rtw88; however, the rx
buffer size for each packet is 8192. When receiving packets that are
larger than rx buffer size, it will leads to rx buffer ring overflow.
Signed-off-by: Tzu-En Huang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/pci.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/pci.h b/drivers/net/wireless/realtek/rtw88/pci.h
index 024c2bc275cbe..ca17aa9cf7dc7 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.h
+++ b/drivers/net/wireless/realtek/rtw88/pci.h
@@ -9,8 +9,8 @@
#define RTK_BEQ_TX_DESC_NUM 256
#define RTK_MAX_RX_DESC_NUM 512
-/* 8K + rx desc size */
-#define RTK_PCI_RX_BUF_SIZE (8192 + 24)
+/* 11K + rx desc size */
+#define RTK_PCI_RX_BUF_SIZE (11454 + 24)
#define RTK_PCI_CTRL 0x300
#define BIT_RST_TRXDMA_INTF BIT(20)
--
2.25.1
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 44492e70adc8086c42d3745d21d591657a427f04 ]
There are reports that 8822CE fails to work rtw88 with "failed to read DBI
register" error. Also I have a system with 8723DE which freezes the whole
system when the rtw88 is probing the device.
According to [1], platform firmware may not properly power manage the
device during shutdown. I did some expirements and putting the device to
D3 can workaround the issue.
So let's power cycle the device by putting the device to D3 at shutdown
to prevent the issue from happening.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=206411#c9
BugLink: https://bugs.launchpad.net/bugs/1872984
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/pci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 3413973bc4750..7f1f5073b9f4d 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -1599,6 +1599,8 @@ void rtw_pci_shutdown(struct pci_dev *pdev)
if (chip->ops->shutdown)
chip->ops->shutdown(rtwdev);
+
+ pci_set_power_state(pdev, PCI_D3hot);
}
EXPORT_SYMBOL(rtw_pci_shutdown);
--
2.25.1
From: Jing Xiangfeng <[email protected]>
[ Upstream commit 055f15ab2cb4a5cbc4c0a775ef3d0066e0fa9b34 ]
Return PTR_ERR() from the error handling case instead of 0.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jing Xiangfeng <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mvumi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c
index 8906aceda4c43..0354898d7cac1 100644
--- a/drivers/scsi/mvumi.c
+++ b/drivers/scsi/mvumi.c
@@ -2425,6 +2425,7 @@ static int mvumi_io_attach(struct mvumi_hba *mhba)
if (IS_ERR(mhba->dm_thread)) {
dev_err(&mhba->pdev->dev,
"failed to create device scan thread\n");
+ ret = PTR_ERR(mhba->dm_thread);
mutex_unlock(&mhba->sas_discovery_mutex);
goto fail_create_thread;
}
--
2.25.1
From: Sherry Sun <[email protected]>
[ Upstream commit 675f0ad4046946e80412896436164d172cd92238 ]
Read and write io memory should address align on ARCH ARM. Change to use
memcpy_toio to avoid kernel panic caused by the address un-align issue.
Signed-off-by: Sherry Sun <[email protected]>
Signed-off-by: Joakim Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/mic/vop/vop_vringh.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c
index 30eac172f0170..d069947b09345 100644
--- a/drivers/misc/mic/vop/vop_vringh.c
+++ b/drivers/misc/mic/vop/vop_vringh.c
@@ -602,6 +602,7 @@ static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf,
size_t partlen;
bool dma = VOP_USE_DMA && vi->dma_ch;
int err = 0;
+ size_t offset = 0;
if (dma) {
dma_alignment = 1 << vi->dma_ch->device->copy_align;
@@ -655,13 +656,20 @@ static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf,
* We are copying to IO below and should ideally use something
* like copy_from_user_toio(..) if it existed.
*/
- if (copy_from_user((void __force *)dbuf, ubuf, len)) {
- err = -EFAULT;
- dev_err(vop_dev(vdev), "%s %d err %d\n",
- __func__, __LINE__, err);
- goto err;
+ while (len) {
+ partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE);
+
+ if (copy_from_user(vvr->buf, ubuf + offset, partlen)) {
+ err = -EFAULT;
+ dev_err(vop_dev(vdev), "%s %d err %d\n",
+ __func__, __LINE__, err);
+ goto err;
+ }
+ memcpy_toio(dbuf + offset, vvr->buf, partlen);
+ offset += partlen;
+ vdev->out_bytes += partlen;
+ len -= partlen;
}
- vdev->out_bytes += len;
err = 0;
err:
vpdev->hw_ops->unmap(vpdev, dbuf);
--
2.25.1
From: Zqiang <[email protected]>
[ Upstream commit e8d5f92b8d30bb4ade76494490c3c065e12411b1 ]
Fix this by increase object reference count.
BUG: KASAN: use-after-free in __lock_acquire+0x3fd4/0x4180
kernel/locking/lockdep.c:3831
Read of size 8 at addr ffff8880683b0018 by task syz-executor.0/3377
CPU: 1 PID: 3377 Comm: syz-executor.0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
__kasan_report+0x131/0x1b0 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
__lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831
lock_acquire+0x127/0x350 kernel/locking/lockdep.c:4488
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
printer_ioctl+0x4a/0x110 drivers/usb/gadget/function/f_printer.c:723
vfs_ioctl fs/ioctl.c:47 [inline]
ksys_ioctl+0xfb/0x130 fs/ioctl.c:763
__do_sys_ioctl fs/ioctl.c:772 [inline]
__se_sys_ioctl fs/ioctl.c:770 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4531a9
Code: ed 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 0f 83 bb 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fd14ad72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 00000000004531a9
RDX: fffffffffffffff9 RSI: 000000000000009e RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004bbd61
R13: 00000000004d0a98 R14: 00007fd14ad736d4 R15: 00000000ffffffff
Allocated by task 2393:
save_stack+0x21/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc.constprop.3+0xa7/0xd0 mm/kasan/common.c:515
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
kmem_cache_alloc_trace+0xfa/0x2d0 mm/slub.c:2813
kmalloc include/linux/slab.h:555 [inline]
kzalloc include/linux/slab.h:669 [inline]
gprinter_alloc+0xa1/0x870 drivers/usb/gadget/function/f_printer.c:1416
usb_get_function+0x58/0xc0 drivers/usb/gadget/functions.c:61
config_usb_cfg_link+0x1ed/0x3e0 drivers/usb/gadget/configfs.c:444
configfs_symlink+0x527/0x11d0 fs/configfs/symlink.c:202
vfs_symlink+0x33d/0x5b0 fs/namei.c:4201
do_symlinkat+0x11b/0x1d0 fs/namei.c:4228
__do_sys_symlinkat fs/namei.c:4242 [inline]
__se_sys_symlinkat fs/namei.c:4239 [inline]
__x64_sys_symlinkat+0x73/0xb0 fs/namei.c:4239
do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 3368:
save_stack+0x21/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:337 [inline]
__kasan_slab_free+0x135/0x190 mm/kasan/common.c:476
kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
slab_free_hook mm/slub.c:1444 [inline]
slab_free_freelist_hook mm/slub.c:1477 [inline]
slab_free mm/slub.c:3034 [inline]
kfree+0xf7/0x410 mm/slub.c:3995
gprinter_free+0x49/0xd0 drivers/usb/gadget/function/f_printer.c:1353
usb_put_function+0x38/0x50 drivers/usb/gadget/functions.c:87
config_usb_cfg_unlink+0x2db/0x3b0 drivers/usb/gadget/configfs.c:485
configfs_unlink+0x3b9/0x7f0 fs/configfs/symlink.c:250
vfs_unlink+0x287/0x570 fs/namei.c:4073
do_unlinkat+0x4f9/0x620 fs/namei.c:4137
__do_sys_unlink fs/namei.c:4184 [inline]
__se_sys_unlink fs/namei.c:4182 [inline]
__x64_sys_unlink+0x42/0x50 fs/namei.c:4182
do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8880683b0000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 24 bytes inside of
1024-byte region [ffff8880683b0000, ffff8880683b0400)
The buggy address belongs to the page:
page:ffffea0001a0ec00 refcount:1 mapcount:0 mapping:ffff88806c00e300
index:0xffff8880683b1800 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 0000000000000000 0000000600000001 ffff88806c00e300
raw: ffff8880683b1800 000000008010000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Reported-by: Kyungtae Kim <[email protected]>
Signed-off-by: Zqiang <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_printer.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 9c7ed2539ff77..8ed1295d7e350 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -31,6 +31,7 @@
#include <linux/types.h>
#include <linux/ctype.h>
#include <linux/cdev.h>
+#include <linux/kref.h>
#include <asm/byteorder.h>
#include <linux/io.h>
@@ -64,7 +65,7 @@ struct printer_dev {
struct usb_gadget *gadget;
s8 interface;
struct usb_ep *in_ep, *out_ep;
-
+ struct kref kref;
struct list_head rx_reqs; /* List of free RX structs */
struct list_head rx_reqs_active; /* List of Active RX xfers */
struct list_head rx_buffers; /* List of completed xfers */
@@ -218,6 +219,13 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
/*-------------------------------------------------------------------------*/
+static void printer_dev_free(struct kref *kref)
+{
+ struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
+
+ kfree(dev);
+}
+
static struct usb_request *
printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
{
@@ -348,6 +356,7 @@ printer_open(struct inode *inode, struct file *fd)
spin_unlock_irqrestore(&dev->lock, flags);
+ kref_get(&dev->kref);
DBG(dev, "printer_open returned %x\n", ret);
return ret;
}
@@ -365,6 +374,7 @@ printer_close(struct inode *inode, struct file *fd)
dev->printer_status &= ~PRINTER_SELECTED;
spin_unlock_irqrestore(&dev->lock, flags);
+ kref_put(&dev->kref, printer_dev_free);
DBG(dev, "printer_close\n");
return 0;
@@ -1350,7 +1360,8 @@ static void gprinter_free(struct usb_function *f)
struct f_printer_opts *opts;
opts = container_of(f->fi, struct f_printer_opts, func_inst);
- kfree(dev);
+
+ kref_put(&dev->kref, printer_dev_free);
mutex_lock(&opts->lock);
--opts->refcnt;
mutex_unlock(&opts->lock);
@@ -1419,6 +1430,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
return ERR_PTR(-ENOMEM);
}
+ kref_init(&dev->kref);
++opts->refcnt;
dev->minor = opts->minor;
dev->pnp_string = opts->pnp_string;
--
2.25.1
From: Oded Gabbay <[email protected]>
[ Upstream commit f763946aefe67b3ea58696b75a930ba1ed886a83 ]
When shifting a boolean variable by more than 31 bits and putting the
result into a u64 variable, we need to cast the boolean into unsigned 64
bits to prevent possible overflow.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/habanalabs/gaudi/gaudi.c | 8 +++++---
drivers/misc/habanalabs/goya/goya.c | 8 +++++---
2 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index ca183733847b6..bcc45bf7af2c8 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -6285,7 +6285,7 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u32 *mask,
is_idle &= is_eng_idle;
if (mask)
- *mask |= !is_eng_idle <<
+ *mask |= ((u64) !is_eng_idle) <<
(GAUDI_ENGINE_ID_DMA_0 + dma_id);
if (s)
seq_printf(s, fmt, dma_id,
@@ -6308,7 +6308,8 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u32 *mask,
is_idle &= is_eng_idle;
if (mask)
- *mask |= !is_eng_idle << (GAUDI_ENGINE_ID_TPC_0 + i);
+ *mask |= ((u64) !is_eng_idle) <<
+ (GAUDI_ENGINE_ID_TPC_0 + i);
if (s)
seq_printf(s, fmt, i,
is_eng_idle ? "Y" : "N",
@@ -6336,7 +6337,8 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u32 *mask,
is_idle &= is_eng_idle;
if (mask)
- *mask |= !is_eng_idle << (GAUDI_ENGINE_ID_MME_0 + i);
+ *mask |= ((u64) !is_eng_idle) <<
+ (GAUDI_ENGINE_ID_MME_0 + i);
if (s) {
if (!is_slave)
seq_printf(s, fmt, i,
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index c179085ced7b8..a8041a39fae31 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -5098,7 +5098,8 @@ static bool goya_is_device_idle(struct hl_device *hdev, u32 *mask,
is_idle &= is_eng_idle;
if (mask)
- *mask |= !is_eng_idle << (GOYA_ENGINE_ID_DMA_0 + i);
+ *mask |= ((u64) !is_eng_idle) <<
+ (GOYA_ENGINE_ID_DMA_0 + i);
if (s)
seq_printf(s, dma_fmt, i, is_eng_idle ? "Y" : "N",
qm_glbl_sts0, dma_core_sts0);
@@ -5121,7 +5122,8 @@ static bool goya_is_device_idle(struct hl_device *hdev, u32 *mask,
is_idle &= is_eng_idle;
if (mask)
- *mask |= !is_eng_idle << (GOYA_ENGINE_ID_TPC_0 + i);
+ *mask |= ((u64) !is_eng_idle) <<
+ (GOYA_ENGINE_ID_TPC_0 + i);
if (s)
seq_printf(s, fmt, i, is_eng_idle ? "Y" : "N",
qm_glbl_sts0, cmdq_glbl_sts0, tpc_cfg_sts);
@@ -5141,7 +5143,7 @@ static bool goya_is_device_idle(struct hl_device *hdev, u32 *mask,
is_idle &= is_eng_idle;
if (mask)
- *mask |= !is_eng_idle << GOYA_ENGINE_ID_MME_0;
+ *mask |= ((u64) !is_eng_idle) << GOYA_ENGINE_ID_MME_0;
if (s) {
seq_printf(s, fmt, 0, is_eng_idle ? "Y" : "N", qm_glbl_sts0,
cmdq_glbl_sts0, mme_arch_sts);
--
2.25.1
From: Joakim Zhang <[email protected]>
[ Upstream commit 9ad02c7f4f279504bdd38ab706fdc97d5f2b2a9c ]
This patch implements error handling and propagates the error value of
flexcan_chip_stop(). This function will be called from flexcan_suspend()
in an upcoming patch in some SoCs which support LPSR mode.
Add a new function flexcan_chip_stop_disable_on_error() that tries to
disable the chip even in case of errors.
Signed-off-by: Joakim Zhang <[email protected]>
[mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/flexcan.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 94d10ec954a05..2ac7a667bde35 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1260,18 +1260,23 @@ static int flexcan_chip_start(struct net_device *dev)
return err;
}
-/* flexcan_chip_stop
+/* __flexcan_chip_stop
*
- * this functions is entered with clocks enabled
+ * this function is entered with clocks enabled
*/
-static void flexcan_chip_stop(struct net_device *dev)
+static int __flexcan_chip_stop(struct net_device *dev, bool disable_on_error)
{
struct flexcan_priv *priv = netdev_priv(dev);
struct flexcan_regs __iomem *regs = priv->regs;
+ int err;
/* freeze + disable module */
- flexcan_chip_freeze(priv);
- flexcan_chip_disable(priv);
+ err = flexcan_chip_freeze(priv);
+ if (err && !disable_on_error)
+ return err;
+ err = flexcan_chip_disable(priv);
+ if (err && !disable_on_error)
+ goto out_chip_unfreeze;
/* Disable all interrupts */
priv->write(0, ®s->imask2);
@@ -1281,6 +1286,23 @@ static void flexcan_chip_stop(struct net_device *dev)
flexcan_transceiver_disable(priv);
priv->can.state = CAN_STATE_STOPPED;
+
+ return 0;
+
+ out_chip_unfreeze:
+ flexcan_chip_unfreeze(priv);
+
+ return err;
+}
+
+static inline int flexcan_chip_stop_disable_on_error(struct net_device *dev)
+{
+ return __flexcan_chip_stop(dev, true);
+}
+
+static inline int flexcan_chip_stop(struct net_device *dev)
+{
+ return __flexcan_chip_stop(dev, false);
}
static int flexcan_open(struct net_device *dev)
@@ -1362,7 +1384,7 @@ static int flexcan_close(struct net_device *dev)
netif_stop_queue(dev);
can_rx_offload_disable(&priv->offload);
- flexcan_chip_stop(dev);
+ flexcan_chip_stop_disable_on_error(dev);
can_rx_offload_del(&priv->offload);
free_irq(dev->irq, dev);
--
2.25.1
From: Johan Hovold <[email protected]>
[ Upstream commit 960c7339de27c6d6fec13b54880501c3576bb08d ]
Handle broken union functional descriptors where the master-interface
doesn't exist or where its class is of neither Communication or Data
type (as required by the specification) by falling back to
"combined-interface" probing.
Note that this still allows for handling union descriptors with switched
interfaces.
This specifically makes the Whistler radio scanners TRX series devices
work with the driver without adding further quirks to the device-id
table.
Reported-by: Daniel Caujolle-Bert <[email protected]>
Tested-by: Daniel Caujolle-Bert <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/class/cdc-acm.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 7499ba118665a..c02488d469185 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1243,9 +1243,21 @@ static int acm_probe(struct usb_interface *intf,
}
}
} else {
+ int class = -1;
+
data_intf_num = union_header->bSlaveInterface0;
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+
+ if (control_interface)
+ class = control_interface->cur_altsetting->desc.bInterfaceClass;
+
+ if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
+ dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ }
}
if (!control_interface || !data_interface) {
--
2.25.1
From: Adam Goode <[email protected]>
[ Upstream commit 8a652a17e3c005dcdae31b6c8fdf14382a29cbbe ]
bFrameIndex and bFormatIndex can be negotiated by the camera during
probing, resulting in the camera choosing a different format than
expected. v4l2 can already accommodate such changes, but the code was
not updating the proper fields.
Without such a change, v4l2 would potentially interpret the payload
incorrectly, causing corrupted output. This was happening on the
Elgato HD60 S+, which currently always renegotiates to format 1.
As an aside, the Elgato firmware is buggy and should not be renegotating,
but it is still a valid thing for the camera to do. Both macOS and Windows
will properly probe and read uncorrupted images from this camera.
With this change, both qv4l2 and chromium can now read uncorrupted video
from the Elgato HD60 S+.
[Add blank lines, remove periods at the of messages]
Signed-off-by: Adam Goode <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_v4l2.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index 0335e69b70abe..5e6f3153b5ff8 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -247,11 +247,41 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream,
if (ret < 0)
goto done;
+ /* After the probe, update fmt with the values returned from
+ * negotiation with the device.
+ */
+ for (i = 0; i < stream->nformats; ++i) {
+ if (probe->bFormatIndex == stream->format[i].index) {
+ format = &stream->format[i];
+ break;
+ }
+ }
+
+ if (i == stream->nformats) {
+ uvc_trace(UVC_TRACE_FORMAT, "Unknown bFormatIndex %u\n",
+ probe->bFormatIndex);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < format->nframes; ++i) {
+ if (probe->bFrameIndex == format->frame[i].bFrameIndex) {
+ frame = &format->frame[i];
+ break;
+ }
+ }
+
+ if (i == format->nframes) {
+ uvc_trace(UVC_TRACE_FORMAT, "Unknown bFrameIndex %u\n",
+ probe->bFrameIndex);
+ return -EINVAL;
+ }
+
fmt->fmt.pix.width = frame->wWidth;
fmt->fmt.pix.height = frame->wHeight;
fmt->fmt.pix.field = V4L2_FIELD_NONE;
fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(format, frame);
fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize;
+ fmt->fmt.pix.pixelformat = format->fcc;
fmt->fmt.pix.colorspace = format->colorspace;
if (uvc_format != NULL)
--
2.25.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit b68d9251561f33661e53dd618f1cafe7ec9ec3c2 ]
This binding driver is needed for Hikey 970 to work,
as otherwise a Serror is produced:
[ 1.837458] SError Interrupt on CPU0, code 0xbf000002 -- SError
[ 1.837462] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205
[ 1.837463] Hardware name: HiKey970 (DT)
[ 1.837465] Workqueue: events deferred_probe_work_func
[ 1.837467] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[ 1.837468] pc : _raw_spin_unlock_irqrestore+0x18/0x50
[ 1.837469] lr : regmap_unlock_spinlock+0x14/0x20
[ 1.837470] sp : ffff8000124dba60
[ 1.837471] x29: ffff8000124dba60 x28: 0000000000000000
[ 1.837474] x27: ffff0001b7e854c8 x26: ffff80001204ea18
[ 1.837476] x25: 0000000000000005 x24: ffff800011f918f8
[ 1.837479] x23: ffff800011fbb588 x22: ffff0001b7e40e00
[ 1.837481] x21: 0000000000000100 x20: 0000000000000000
[ 1.837483] x19: ffff0001b767ec00 x18: 00000000ff10c000
[ 1.837485] x17: 0000000000000002 x16: 0000b0740fdb9950
[ 1.837488] x15: ffff8000116c1198 x14: ffffffffffffffff
[ 1.837490] x13: 0000000000000030 x12: 0101010101010101
[ 1.837493] x11: 0000000000000020 x10: ffff0001bf17d130
[ 1.837495] x9 : 0000000000000000 x8 : ffff0001b6938080
[ 1.837497] x7 : 0000000000000000 x6 : 000000000000003f
[ 1.837500] x5 : 0000000000000000 x4 : 0000000000000000
[ 1.837502] x3 : ffff80001096a880 x2 : 0000000000000000
[ 1.837505] x1 : ffff0001b7e40e00 x0 : 0000000100000001
[ 1.837507] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 1.837509] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205
[ 1.837510] Hardware name: HiKey970 (DT)
[ 1.837511] Workqueue: events deferred_probe_work_func
[ 1.837513] Call trace:
[ 1.837514] dump_backtrace+0x0/0x1e0
[ 1.837515] show_stack+0x18/0x24
[ 1.837516] dump_stack+0xc0/0x11c
[ 1.837517] panic+0x15c/0x324
[ 1.837518] nmi_panic+0x8c/0x90
[ 1.837519] arm64_serror_panic+0x78/0x84
[ 1.837520] do_serror+0x158/0x15c
[ 1.837521] el1_error+0x84/0x100
[ 1.837522] _raw_spin_unlock_irqrestore+0x18/0x50
[ 1.837523] regmap_write+0x58/0x80
[ 1.837524] hi3660_reset_deassert+0x28/0x34
[ 1.837526] reset_control_deassert+0x50/0x260
[ 1.837527] reset_control_deassert+0xf4/0x260
[ 1.837528] dwc3_probe+0x5dc/0xe6c
[ 1.837529] platform_drv_probe+0x54/0xb0
[ 1.837530] really_probe+0xe0/0x490
[ 1.837531] driver_probe_device+0xf4/0x160
[ 1.837532] __device_attach_driver+0x8c/0x114
[ 1.837533] bus_for_each_drv+0x78/0xcc
[ 1.837534] __device_attach+0x108/0x1a0
[ 1.837535] device_initial_probe+0x14/0x20
[ 1.837537] bus_probe_device+0x98/0xa0
[ 1.837538] deferred_probe_work_func+0x88/0xe0
[ 1.837539] process_one_work+0x1cc/0x350
[ 1.837540] worker_thread+0x2c0/0x470
[ 1.837541] kthread+0x154/0x160
[ 1.837542] ret_from_fork+0x10/0x30
[ 1.837569] SMP: stopping secondary CPUs
[ 1.837570] Kernel Offset: 0x1d0000 from 0xffff800010000000
[ 1.837571] PHYS_OFFSET: 0x0
[ 1.837572] CPU features: 0x240002,20882004
[ 1.837573] Memory Limit: none
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/dwc3-of-simple.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 8852fbfdead4e..336253ff55749 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -176,6 +176,7 @@ static const struct of_device_id of_dwc3_simple_match[] = {
{ .compatible = "cavium,octeon-7130-usb-uctl" },
{ .compatible = "sprd,sc9860-dwc3" },
{ .compatible = "allwinner,sun50i-h6-dwc3" },
+ { .compatible = "hisilicon,hi3670-dwc3" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
--
2.25.1
From: Vikash Garodia <[email protected]>
[ Upstream commit e1c69c4eef61ffe295b747992c6fd849e6cd747d ]
There are few list handling issues while adding and deleting
node in the registered buf list in the driver.
1. list addition - buffer added into the list during buf_init
while not deleted during cleanup.
2. list deletion - In capture streamoff, the list was reinitialized.
As a result, if any node was present in the list, it would
lead to issue while cleaning up that node during buf_cleanup.
Corresponding call traces below:
[ 165.751014] Call trace:
[ 165.753541] __list_add_valid+0x58/0x88
[ 165.757532] venus_helper_vb2_buf_init+0x74/0xa8 [venus_core]
[ 165.763450] vdec_buf_init+0x34/0xb4 [venus_dec]
[ 165.768271] __buf_prepare+0x598/0x8a0 [videobuf2_common]
[ 165.773820] vb2_core_qbuf+0xb4/0x334 [videobuf2_common]
[ 165.779298] vb2_qbuf+0x78/0xb8 [videobuf2_v4l2]
[ 165.784053] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem]
[ 165.789067] v4l2_m2m_ioctl_qbuf+0x2c/0x38 [v4l2_mem2mem]
[ 165.794624] v4l_qbuf+0x48/0x58
[ 1797.556001] Call trace:
[ 1797.558516] __list_del_entry_valid+0x88/0x9c
[ 1797.562989] vdec_buf_cleanup+0x54/0x228 [venus_dec]
[ 1797.568088] __buf_prepare+0x270/0x8a0 [videobuf2_common]
[ 1797.573625] vb2_core_qbuf+0xb4/0x338 [videobuf2_common]
[ 1797.579082] vb2_qbuf+0x78/0xb8 [videobuf2_v4l2]
[ 1797.583830] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem]
[ 1797.588843] v4l2_m2m_ioctl_qbuf+0x2c/0x38 [v4l2_mem2mem]
[ 1797.594389] v4l_qbuf+0x48/0x58
Signed-off-by: Vikash Garodia <[email protected]>
Reviewed-by: Fritz Koenig <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/vdec.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
index 7c4c483d54389..76be14efbfb09 100644
--- a/drivers/media/platform/qcom/venus/vdec.c
+++ b/drivers/media/platform/qcom/venus/vdec.c
@@ -1088,8 +1088,6 @@ static int vdec_stop_capture(struct venus_inst *inst)
break;
}
- INIT_LIST_HEAD(&inst->registeredbufs);
-
return ret;
}
@@ -1189,6 +1187,14 @@ static int vdec_buf_init(struct vb2_buffer *vb)
static void vdec_buf_cleanup(struct vb2_buffer *vb)
{
struct venus_inst *inst = vb2_get_drv_priv(vb->vb2_queue);
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct venus_buffer *buf = to_venus_buffer(vbuf);
+
+ mutex_lock(&inst->lock);
+ if (vb->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+ if (!list_empty(&inst->registeredbufs))
+ list_del_init(&buf->reg_list);
+ mutex_unlock(&inst->lock);
inst->buf_count--;
if (!inst->buf_count)
--
2.25.1
From: Jia Yang <[email protected]>
[ Upstream commit da62cb7230f0871c30dc9789071f63229158d261 ]
I got a use-after-free report when doing some fuzz test:
If ttm_bo_init() fails, the "gbo" and "gbo->bo.base" will be
freed by ttm_buffer_object_destroy() in ttm_bo_init(). But
then drm_gem_vram_create() and drm_gem_vram_init() will free
"gbo" and "gbo->bo.base" again.
BUG: KMSAN: use-after-free in drm_vma_offset_remove+0xb3/0x150
CPU: 0 PID: 24282 Comm: syz-executor.1 Tainted: G B W 5.7.0-rc4-msan #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack
dump_stack+0x1c9/0x220
kmsan_report+0xf7/0x1e0
__msan_warning+0x58/0xa0
drm_vma_offset_remove+0xb3/0x150
drm_gem_free_mmap_offset
drm_gem_object_release+0x159/0x180
drm_gem_vram_init
drm_gem_vram_create+0x7c5/0x990
drm_gem_vram_fill_create_dumb
drm_gem_vram_driver_dumb_create+0x238/0x590
drm_mode_create_dumb
drm_mode_create_dumb_ioctl+0x41d/0x450
drm_ioctl_kernel+0x5a4/0x710
drm_ioctl+0xc6f/0x1240
vfs_ioctl
ksys_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x2e9/0x410
__x64_sys_ioctl+0x4a/0x70
do_syscall_64+0xb8/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4689b9
Code: fd e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f368fa4dc98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000076bf00 RCX: 00000000004689b9
RDX: 0000000020000240 RSI: 00000000c02064b2 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00000000004d17e0 R14: 00007f368fa4e6d4 R15: 000000000076bf0c
Uninit was created at:
kmsan_save_stack_with_flags
kmsan_internal_poison_shadow+0x66/0xd0
kmsan_slab_free+0x6e/0xb0
slab_free_freelist_hook
slab_free
kfree+0x571/0x30a0
drm_gem_vram_destroy
ttm_buffer_object_destroy+0xc8/0x130
ttm_bo_release
kref_put
ttm_bo_put+0x117d/0x23e0
ttm_bo_init_reserved+0x11c0/0x11d0
ttm_bo_init+0x289/0x3f0
drm_gem_vram_init
drm_gem_vram_create+0x775/0x990
drm_gem_vram_fill_create_dumb
drm_gem_vram_driver_dumb_create+0x238/0x590
drm_mode_create_dumb
drm_mode_create_dumb_ioctl+0x41d/0x450
drm_ioctl_kernel+0x5a4/0x710
drm_ioctl+0xc6f/0x1240
vfs_ioctl
ksys_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x2e9/0x410
__x64_sys_ioctl+0x4a/0x70
do_syscall_64+0xb8/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xa9
If ttm_bo_init() fails, the "gbo" will be freed by
ttm_buffer_object_destroy() in ttm_bo_init(). But then
drm_gem_vram_create() and drm_gem_vram_init() will free
"gbo" again.
Reported-by: Hulk Robot <[email protected]>
Reported-by: butt3rflyh4ck <[email protected]>
Signed-off-by: Jia Yang <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_gem_vram_helper.c | 28 +++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/drm_gem_vram_helper.c b/drivers/gpu/drm/drm_gem_vram_helper.c
index 8b2d5c945c95c..1d85af9a481ac 100644
--- a/drivers/gpu/drm/drm_gem_vram_helper.c
+++ b/drivers/gpu/drm/drm_gem_vram_helper.c
@@ -175,6 +175,10 @@ static void drm_gem_vram_placement(struct drm_gem_vram_object *gbo,
}
}
+/*
+ * Note that on error, drm_gem_vram_init will free the buffer object.
+ */
+
static int drm_gem_vram_init(struct drm_device *dev,
struct drm_gem_vram_object *gbo,
size_t size, unsigned long pg_align)
@@ -184,15 +188,19 @@ static int drm_gem_vram_init(struct drm_device *dev,
int ret;
size_t acc_size;
- if (WARN_ONCE(!vmm, "VRAM MM not initialized"))
+ if (WARN_ONCE(!vmm, "VRAM MM not initialized")) {
+ kfree(gbo);
return -EINVAL;
+ }
bdev = &vmm->bdev;
gbo->bo.base.funcs = &drm_gem_vram_object_funcs;
ret = drm_gem_object_init(dev, &gbo->bo.base, size);
- if (ret)
+ if (ret) {
+ kfree(gbo);
return ret;
+ }
acc_size = ttm_bo_dma_acc_size(bdev, size, sizeof(*gbo));
@@ -203,13 +211,13 @@ static int drm_gem_vram_init(struct drm_device *dev,
&gbo->placement, pg_align, false, acc_size,
NULL, NULL, ttm_buffer_object_destroy);
if (ret)
- goto err_drm_gem_object_release;
+ /*
+ * A failing ttm_bo_init will call ttm_buffer_object_destroy
+ * to release gbo->bo.base and kfree gbo.
+ */
+ return ret;
return 0;
-
-err_drm_gem_object_release:
- drm_gem_object_release(&gbo->bo.base);
- return ret;
}
/**
@@ -243,13 +251,9 @@ struct drm_gem_vram_object *drm_gem_vram_create(struct drm_device *dev,
ret = drm_gem_vram_init(dev, gbo, size, pg_align);
if (ret < 0)
- goto err_kfree;
+ return ERR_PTR(ret);
return gbo;
-
-err_kfree:
- kfree(gbo);
- return ERR_PTR(ret);
}
EXPORT_SYMBOL(drm_gem_vram_create);
--
2.25.1
From: Rajendra Nayak <[email protected]>
[ Upstream commit 98cd831088c64aa8fe7e1d2a8bb94b6faba0462b ]
Post a successful pm_ops->core_get, an error in probe
should exit by doing a pm_ops->core_put which seems
to be missing. So fix it.
Signed-off-by: Rajendra Nayak <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/core.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 203c6538044fb..bfcaba37d60fe 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -224,13 +224,15 @@ static int venus_probe(struct platform_device *pdev)
ret = dma_set_mask_and_coherent(dev, core->res->dma_mask);
if (ret)
- return ret;
+ goto err_core_put;
if (!dev->dma_parms) {
dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms),
GFP_KERNEL);
- if (!dev->dma_parms)
- return -ENOMEM;
+ if (!dev->dma_parms) {
+ ret = -ENOMEM;
+ goto err_core_put;
+ }
}
dma_set_max_seg_size(dev, DMA_BIT_MASK(32));
@@ -242,11 +244,11 @@ static int venus_probe(struct platform_device *pdev)
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"venus", core);
if (ret)
- return ret;
+ goto err_core_put;
ret = hfi_create(core, &venus_core_ops);
if (ret)
- return ret;
+ goto err_core_put;
pm_runtime_enable(dev);
@@ -302,6 +304,9 @@ static int venus_probe(struct platform_device *pdev)
pm_runtime_set_suspended(dev);
pm_runtime_disable(dev);
hfi_destroy(core);
+err_core_put:
+ if (core->pm_ops->core_put)
+ core->pm_ops->core_put(dev);
return ret;
}
--
2.25.1
From: Keita Suzuki <[email protected]>
[ Upstream commit f4443293d741d1776b86ed1dd8c4e4285d0775fc ]
When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy,
the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be
freed in the caller function.
Fix this by calling wlc_phy_detach_lcnphy in the error handler of
wlc_phy_txpwr_srom_read_lcnphy before returning.
Signed-off-by: Keita Suzuki <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
index 7ef36234a25dc..66797dc5e90d5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -5065,8 +5065,10 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi)
pi->pi_fptr.radioloftget = wlc_lcnphy_get_radio_loft;
pi->pi_fptr.detach = wlc_phy_detach_lcnphy;
- if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
+ if (!wlc_phy_txpwr_srom_read_lcnphy(pi)) {
+ kfree(pi->u.pi_lcnphy);
return false;
+ }
if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
if (pi_lcn->lcnphy_tempsense_option == 3) {
--
2.25.1
From: Nilesh Javali <[email protected]>
[ Upstream commit c0650e28448d606c84f76c34333dba30f61de993 ]
Protect active command list for non-I/O commands like login response,
logout response, text response, and recovery cleanup of active list to
avoid list corruption.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qedi/qedi_fw.c | 8 ++++++++
drivers/scsi/qedi/qedi_iscsi.c | 2 ++
2 files changed, 10 insertions(+)
diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c
index 946cebc4c9322..32586800620bd 100644
--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -59,6 +59,7 @@ static void qedi_process_logout_resp(struct qedi_ctx *qedi,
"Freeing tid=0x%x for cid=0x%x\n",
cmd->task_id, qedi_conn->iscsi_conn_id);
+ spin_lock(&qedi_conn->list_lock);
if (likely(cmd->io_cmd_in_list)) {
cmd->io_cmd_in_list = false;
list_del_init(&cmd->io_cmd);
@@ -69,6 +70,7 @@ static void qedi_process_logout_resp(struct qedi_ctx *qedi,
cmd->task_id, qedi_conn->iscsi_conn_id,
&cmd->io_cmd);
}
+ spin_unlock(&qedi_conn->list_lock);
cmd->state = RESPONSE_RECEIVED;
qedi_clear_task_idx(qedi, cmd->task_id);
@@ -122,6 +124,7 @@ static void qedi_process_text_resp(struct qedi_ctx *qedi,
"Freeing tid=0x%x for cid=0x%x\n",
cmd->task_id, qedi_conn->iscsi_conn_id);
+ spin_lock(&qedi_conn->list_lock);
if (likely(cmd->io_cmd_in_list)) {
cmd->io_cmd_in_list = false;
list_del_init(&cmd->io_cmd);
@@ -132,6 +135,7 @@ static void qedi_process_text_resp(struct qedi_ctx *qedi,
cmd->task_id, qedi_conn->iscsi_conn_id,
&cmd->io_cmd);
}
+ spin_unlock(&qedi_conn->list_lock);
cmd->state = RESPONSE_RECEIVED;
qedi_clear_task_idx(qedi, cmd->task_id);
@@ -222,11 +226,13 @@ static void qedi_process_tmf_resp(struct qedi_ctx *qedi,
tmf_hdr = (struct iscsi_tm *)qedi_cmd->task->hdr;
+ spin_lock(&qedi_conn->list_lock);
if (likely(qedi_cmd->io_cmd_in_list)) {
qedi_cmd->io_cmd_in_list = false;
list_del_init(&qedi_cmd->io_cmd);
qedi_conn->active_cmd_count--;
}
+ spin_unlock(&qedi_conn->list_lock);
if (((tmf_hdr->flags & ISCSI_FLAG_TM_FUNC_MASK) ==
ISCSI_TM_FUNC_LOGICAL_UNIT_RESET) ||
@@ -288,11 +294,13 @@ static void qedi_process_login_resp(struct qedi_ctx *qedi,
ISCSI_LOGIN_RESPONSE_HDR_DATA_SEG_LEN_MASK;
qedi_conn->gen_pdu.resp_wr_ptr = qedi_conn->gen_pdu.resp_buf + pld_len;
+ spin_lock(&qedi_conn->list_lock);
if (likely(cmd->io_cmd_in_list)) {
cmd->io_cmd_in_list = false;
list_del_init(&cmd->io_cmd);
qedi_conn->active_cmd_count--;
}
+ spin_unlock(&qedi_conn->list_lock);
memset(task_ctx, '\0', sizeof(*task_ctx));
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index 425e665ec08b2..6e92625df4b7c 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -975,11 +975,13 @@ static void qedi_cleanup_active_cmd_list(struct qedi_conn *qedi_conn)
{
struct qedi_cmd *cmd, *cmd_tmp;
+ spin_lock(&qedi_conn->list_lock);
list_for_each_entry_safe(cmd, cmd_tmp, &qedi_conn->active_cmd_list,
io_cmd) {
list_del_init(&cmd->io_cmd);
qedi_conn->active_cmd_count--;
}
+ spin_unlock(&qedi_conn->list_lock);
}
static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
--
2.25.1
From: Abhishek Pandit-Subedi <[email protected]>
[ Upstream commit 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 ]
Since l2cap_sock_teardown_cb doesn't acquire the channel lock before
setting the socket as zapped, it could potentially race with
l2cap_sock_release which frees the socket. Thus, wait until the cleanup
is complete before marking the socket as zapped.
This race was reproduced on a JBL GO speaker after the remote device
rejected L2CAP connection due to resource unavailability.
Here is a dmesg log with debug logs from a repro of this bug:
[ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002
[ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0
[ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2
[ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001
[ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952
[ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c
[ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00
[ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4
[ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT
[ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT
[ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3
[ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6
[ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159
[ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053
[ 3465.430330] lock: 0xffffff804410aac0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 3465.430332] Causing a watchdog bite!
Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
Reported-by: Balakrishna Godavarthi <[email protected]>
Reviewed-by: Manish Mandlik <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index c7fc28a465fdb..fa66e27b73635 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1521,8 +1521,6 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
parent = bt_sk(sk)->parent;
- sock_set_flag(sk, SOCK_ZAPPED);
-
switch (chan->state) {
case BT_OPEN:
case BT_BOUND:
@@ -1549,8 +1547,11 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
break;
}
-
release_sock(sk);
+
+ /* Only zap after cleanup to avoid use after free race */
+ sock_set_flag(sk, SOCK_ZAPPED);
+
}
static void l2cap_sock_state_change_cb(struct l2cap_chan *chan, int state,
--
2.25.1
From: Tong Zhang <[email protected]>
[ Upstream commit db332356222d9429731ab9395c89cca403828460 ]
ipwireless_send_packet() can only return 0 on success and -ENOMEM on
error, the caller should check non zero for error condition
Signed-off-by: Tong Zhang <[email protected]>
Acked-by: David Sterba <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/ipwireless/network.c | 4 ++--
drivers/tty/ipwireless/tty.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index cf20616340a1a..fe569f6294a24 100644
--- a/drivers/tty/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
@@ -117,7 +117,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
skb->len,
notify_packet_sent,
network);
- if (ret == -1) {
+ if (ret < 0) {
skb_pull(skb, 2);
return 0;
}
@@ -134,7 +134,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
notify_packet_sent,
network);
kfree(buf);
- if (ret == -1)
+ if (ret < 0)
return 0;
}
kfree_skb(skb);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index fad3401e604d9..23584769fc292 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -218,7 +218,7 @@ static int ipw_write(struct tty_struct *linux_tty,
ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
buf, count,
ipw_write_packet_sent_callback, tty);
- if (ret == -1) {
+ if (ret < 0) {
mutex_unlock(&tty->ipw_tty_mutex);
return 0;
}
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit d33fe77bdf75806d785dabf90d21d962122e5296 ]
When kmalloc() on buf fails, urb should be freed just like
when kmalloc() on dr fails.
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a5fef9aa419fd..91a0c84d55c97 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2849,6 +2849,7 @@ static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev)
buf = kmalloc(size, GFP_KERNEL);
if (!buf) {
kfree(dr);
+ usb_free_urb(urb);
return -ENOMEM;
}
--
2.25.1
From: Saurav Kashyap <[email protected]>
[ Upstream commit 10aff62fab263ad7661780816551420cea956ebb ]
If SUCCESS is not returned, error handling will escalate. Return SUCCESS
similar to other conditions in this function.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Javed Hasan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qedf/qedf_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 51cfab9d1afdc..ed3054fffa344 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -704,7 +704,7 @@ static int qedf_eh_abort(struct scsi_cmnd *sc_cmd)
rdata = fcport->rdata;
if (!rdata || !kref_get_unless_zero(&rdata->kref)) {
QEDF_ERR(&qedf->dbg_ctx, "stale rport, sc_cmd=%p\n", sc_cmd);
- rc = 1;
+ rc = SUCCESS;
goto out;
}
--
2.25.1
From: Jan Kara <[email protected]>
[ Upstream commit e9d4709fcc26353df12070566970f080e651f0c9 ]
When a usrjquota or grpjquota mount option is used multiple times, we
will leak memory allocated for the file name. Make sure the last setting
is used and all the previous ones are properly freed.
Reported-by: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/reiserfs/super.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index a6bce5b1fb1dc..1b9c7a387dc71 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1258,6 +1258,10 @@ static int reiserfs_parse_options(struct super_block *s,
"turned on.");
return 0;
}
+ if (qf_names[qtype] !=
+ REISERFS_SB(s)->s_qf_names[qtype])
+ kfree(qf_names[qtype]);
+ qf_names[qtype] = NULL;
if (*arg) { /* Some filename specified? */
if (REISERFS_SB(s)->s_qf_names[qtype]
&& strcmp(REISERFS_SB(s)->s_qf_names[qtype],
@@ -1287,10 +1291,6 @@ static int reiserfs_parse_options(struct super_block *s,
else
*mount_options |= 1 << REISERFS_GRPQUOTA;
} else {
- if (qf_names[qtype] !=
- REISERFS_SB(s)->s_qf_names[qtype])
- kfree(qf_names[qtype]);
- qf_names[qtype] = NULL;
if (qtype == USRQUOTA)
*mount_options &= ~(1 << REISERFS_USRQUOTA);
else
--
2.25.1
From: Nilesh Javali <[email protected]>
[ Upstream commit 4118879be3755b38171063dfd4a57611d4b20a83 ]
For short time cable pulls, the in-flight I/O to the firmware is never
cleaned up, resulting in the behaviour of stale I/O completion causing
list_del corruption and soft lockup of the system.
On link down event, mark all the connections for recovery, causing cleanup
of all the in-flight I/O immediately.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qedi/qedi_main.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index 81a307695cc91..569fa4b28e4e2 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -1127,6 +1127,15 @@ static void qedi_schedule_recovery_handler(void *dev)
schedule_delayed_work(&qedi->recovery_work, 0);
}
+static void qedi_set_conn_recovery(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *session = cls_session->dd_data;
+ struct iscsi_conn *conn = session->leadconn;
+ struct qedi_conn *qedi_conn = conn->dd_data;
+
+ qedi_start_conn_recovery(qedi_conn->qedi, qedi_conn);
+}
+
static void qedi_link_update(void *dev, struct qed_link_output *link)
{
struct qedi_ctx *qedi = (struct qedi_ctx *)dev;
@@ -1138,6 +1147,7 @@ static void qedi_link_update(void *dev, struct qed_link_output *link)
QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_INFO,
"Link Down event.\n");
atomic_set(&qedi->link_state, QEDI_LINK_DOWN);
+ iscsi_host_for_each_session(qedi->shost, qedi_set_conn_recovery);
}
}
--
2.25.1
From: Daniel Wagner <[email protected]>
[ Upstream commit c0014f94218ea3a312f6235febea0d626c5f2154 ]
Emit a warning when ->done or ->free are called on an already freed
srb. There is a hidden use-after-free bug in the driver which corrupts
the srb memory pool which originates from the cleanup callbacks.
An extensive search didn't bring any lights on the real problem. The
initial fix was to set both pointers to NULL and try to catch invalid
accesses. But instead the memory corruption was gone and the driver
didn't crash. Since not all calling places check for NULL pointer, add
explicitly default handlers. With this we workaround the memory
corruption and add a debug help.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Martin Wilck <[email protected]>
Reviewed-by: Arun Easi <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 10 ++++++++++
drivers/scsi/qla2xxx/qla_inline.h | 5 +++++
2 files changed, 15 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2861c636dd651..f17ab22ad0e4a 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -63,6 +63,16 @@ void qla2x00_sp_free(srb_t *sp)
qla2x00_rel_sp(sp);
}
+void qla2xxx_rel_done_warning(srb_t *sp, int res)
+{
+ WARN_ONCE(1, "Calling done() of an already freed srb %p object\n", sp);
+}
+
+void qla2xxx_rel_free_warning(srb_t *sp)
+{
+ WARN_ONCE(1, "Calling free() of an already freed srb %p object\n", sp);
+}
+
/* Asynchronous Login/Logout Routines -------------------------------------- */
unsigned long
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 1fb6ccac07ccd..26d9c78d4c52c 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -207,10 +207,15 @@ qla2xxx_get_qpair_sp(scsi_qla_host_t *vha, struct qla_qpair *qpair,
return sp;
}
+void qla2xxx_rel_done_warning(srb_t *sp, int res);
+void qla2xxx_rel_free_warning(srb_t *sp);
+
static inline void
qla2xxx_rel_qpair_sp(struct qla_qpair *qpair, srb_t *sp)
{
sp->qpair = NULL;
+ sp->done = qla2xxx_rel_done_warning;
+ sp->free = qla2xxx_rel_free_warning;
mempool_free(sp, qpair->srb_mempool);
QLA_QPAIR_MARK_NOT_BUSY(qpair);
}
--
2.25.1
From: Peilin Ye <[email protected]>
[ Upstream commit c5a8a8498eed1c164afc94f50a939c1a10abf8ad ]
do_ip_vs_set_ctl() is referencing uninitialized stack value when `len` is
zero. Fix it.
Reported-by: [email protected]
Link: https://syzkaller.appspot.com/bug?id=46ebfb92a8a812621a001ef04d90dfa459520fe2
Suggested-by: Julian Anastasov <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipvs/ip_vs_ctl.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 412656c34f205..beeafa42aad76 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2471,6 +2471,10 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
/* Set timeout values for (tcp tcpfin udp) */
ret = ip_vs_set_timeout(ipvs, (struct ip_vs_timeout_user *)arg);
goto out_unlock;
+ } else if (!len) {
+ /* No more commands with len == 0 below */
+ ret = -EINVAL;
+ goto out_unlock;
}
usvc_compat = (struct ip_vs_service_user *)arg;
@@ -2547,9 +2551,6 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
break;
case IP_VS_SO_SET_DELDEST:
ret = ip_vs_del_dest(svc, &udest);
- break;
- default:
- ret = -EINVAL;
}
out_unlock:
--
2.25.1
From: Eli Billauer <[email protected]>
[ Upstream commit fbc299437c06648afcc7891e6e2e6638dd48d4df ]
usb_kill_anchored_urbs() is commonly used to cancel all URBs on an
anchor just before releasing resources which the URBs rely on. By doing
so, users of this function rely on that no completer callbacks will take
place from any URB on the anchor after it returns.
However if this function is called in parallel with __usb_hcd_giveback_urb
processing a URB on the anchor, the latter may call the completer
callback after usb_kill_anchored_urbs() returns. This can lead to a
kernel panic due to use after release of memory in interrupt context.
The race condition is that __usb_hcd_giveback_urb() first unanchors the URB
and then makes the completer callback. Such URB is hence invisible to
usb_kill_anchored_urbs(), allowing it to return before the completer has
been called, since the anchor's urb_list is empty.
Even worse, if the racing completer callback resubmits the URB, it may
remain in the system long after usb_kill_anchored_urbs() returns.
Hence list_empty(&anchor->urb_list), which is used in the existing
while-loop, doesn't reliably ensure that all URBs of the anchor are gone.
A similar problem exists with usb_poison_anchored_urbs() and
usb_scuttle_anchored_urbs().
This patch adds an external do-while loop, which ensures that all URBs
are indeed handled before these three functions return. This change has
no effect at all unless the race condition occurs, in which case the
loop will busy-wait until the racing completer callback has finished.
This is a rare condition, so the CPU waste of this spinning is
negligible.
The additional do-while loop relies on usb_anchor_check_wakeup(), which
returns true iff the anchor list is empty, and there is no
__usb_hcd_giveback_urb() in the system that is in the middle of the
unanchor-before-complete phase. The @suspend_wakeups member of
struct usb_anchor is used for this purpose, which was introduced to solve
another problem which the same race condition causes, in commit
6ec4147e7bdb ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up
till completion is done").
The surely_empty variable is necessary, because usb_anchor_check_wakeup()
must be called with the lock held to prevent races. However the spinlock
must be released and reacquired if the outer loop spins with an empty
URB list while waiting for the unanchor-before-complete passage to finish:
The completer callback may very well attempt to take the very same lock.
To summarize, using usb_anchor_check_wakeup() means that the patched
functions can return only when the anchor's list is empty, and there is
no invisible URB being processed. Since the inner while loop finishes on
the empty list condition, the new do-while loop will terminate as well,
except for when the said race condition occurs.
Signed-off-by: Eli Billauer <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Acked-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/urb.c | 89 +++++++++++++++++++++++++-----------------
1 file changed, 54 insertions(+), 35 deletions(-)
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index da923ec176122..31ca5abb4c12a 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -772,11 +772,12 @@ void usb_block_urb(struct urb *urb)
EXPORT_SYMBOL_GPL(usb_block_urb);
/**
- * usb_kill_anchored_urbs - cancel transfer requests en masse
+ * usb_kill_anchored_urbs - kill all URBs associated with an anchor
* @anchor: anchor the requests are bound to
*
- * this allows all outstanding URBs to be killed starting
- * from the back of the queue
+ * This kills all outstanding URBs starting from the back of the queue,
+ * with guarantee that no completer callbacks will take place from the
+ * anchor after this function returns.
*
* This routine should not be called by a driver after its disconnect
* method has returned.
@@ -784,20 +785,26 @@ EXPORT_SYMBOL_GPL(usb_block_urb);
void usb_kill_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
+ int surely_empty;
- spin_lock_irq(&anchor->lock);
- while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb,
- anchor_list);
- /* we must make sure the URB isn't freed before we kill it*/
- usb_get_urb(victim);
- spin_unlock_irq(&anchor->lock);
- /* this will unanchor the URB */
- usb_kill_urb(victim);
- usb_put_urb(victim);
+ do {
spin_lock_irq(&anchor->lock);
- }
- spin_unlock_irq(&anchor->lock);
+ while (!list_empty(&anchor->urb_list)) {
+ victim = list_entry(anchor->urb_list.prev,
+ struct urb, anchor_list);
+ /* make sure the URB isn't freed before we kill it */
+ usb_get_urb(victim);
+ spin_unlock_irq(&anchor->lock);
+ /* this will unanchor the URB */
+ usb_kill_urb(victim);
+ usb_put_urb(victim);
+ spin_lock_irq(&anchor->lock);
+ }
+ surely_empty = usb_anchor_check_wakeup(anchor);
+
+ spin_unlock_irq(&anchor->lock);
+ cpu_relax();
+ } while (!surely_empty);
}
EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
@@ -816,21 +823,27 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
void usb_poison_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
+ int surely_empty;
- spin_lock_irq(&anchor->lock);
- anchor->poisoned = 1;
- while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb,
- anchor_list);
- /* we must make sure the URB isn't freed before we kill it*/
- usb_get_urb(victim);
- spin_unlock_irq(&anchor->lock);
- /* this will unanchor the URB */
- usb_poison_urb(victim);
- usb_put_urb(victim);
+ do {
spin_lock_irq(&anchor->lock);
- }
- spin_unlock_irq(&anchor->lock);
+ anchor->poisoned = 1;
+ while (!list_empty(&anchor->urb_list)) {
+ victim = list_entry(anchor->urb_list.prev,
+ struct urb, anchor_list);
+ /* make sure the URB isn't freed before we kill it */
+ usb_get_urb(victim);
+ spin_unlock_irq(&anchor->lock);
+ /* this will unanchor the URB */
+ usb_poison_urb(victim);
+ usb_put_urb(victim);
+ spin_lock_irq(&anchor->lock);
+ }
+ surely_empty = usb_anchor_check_wakeup(anchor);
+
+ spin_unlock_irq(&anchor->lock);
+ cpu_relax();
+ } while (!surely_empty);
}
EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
@@ -970,14 +983,20 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
unsigned long flags;
+ int surely_empty;
+
+ do {
+ spin_lock_irqsave(&anchor->lock, flags);
+ while (!list_empty(&anchor->urb_list)) {
+ victim = list_entry(anchor->urb_list.prev,
+ struct urb, anchor_list);
+ __usb_unanchor_urb(victim, anchor);
+ }
+ surely_empty = usb_anchor_check_wakeup(anchor);
- spin_lock_irqsave(&anchor->lock, flags);
- while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb,
- anchor_list);
- __usb_unanchor_urb(victim, anchor);
- }
- spin_unlock_irqrestore(&anchor->lock, flags);
+ spin_unlock_irqrestore(&anchor->lock, flags);
+ cpu_relax();
+ } while (!surely_empty);
}
EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);
--
2.25.1
From: Julian Wiedmann <[email protected]>
[ Upstream commit a04f0ecacdb0639d416614619225a39de3927e22 ]
The only time that our Bridgeport role should change is when we change
the configuration ourselves. In which case we also adjust our internal
state tracking, no need to do it again when we receive the corresponding
event.
Removing the locked section helps a subsequent patch that needs to flush
the workqueue while under sbp_lock.
It would be nice to raise a warning here in case HW does weird things
after all, but this could end up generating false-positives when we
change the configuration ourselves.
Suggested-by: Alexandra Winter <[email protected]>
Signed-off-by: Julian Wiedmann <[email protected]>
Reviewed-by: Alexandra Winter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/qeth_l2_main.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 0384b45a72658..7c6f6a09b99e4 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1122,12 +1122,6 @@ static void qeth_bridge_state_change_worker(struct work_struct *work)
NULL
};
- /* Role should not change by itself, but if it did, */
- /* information from the hardware is authoritative. */
- mutex_lock(&data->card->sbp_lock);
- data->card->options.sbp.role = entry->role;
- mutex_unlock(&data->card->sbp_lock);
-
snprintf(env_locrem, sizeof(env_locrem), "BRIDGEPORT=statechange");
snprintf(env_role, sizeof(env_role), "ROLE=%s",
(entry->role == QETH_SBP_ROLE_NONE) ? "none" :
--
2.25.1
From: Lorenzo Colitti <[email protected]>
[ Upstream commit 7974ecd7d3c0f42a98566f281e44ea8573a2ad88 ]
Currently, enabling f_ncm at SuperSpeed Plus speeds results in an
oops in config_ep_by_speed because ncm_set_alt passes in NULL
ssp_descriptors. Fix this by re-using the SuperSpeed descriptors.
This is safe because usb_assign_descriptors calls
usb_copy_descriptors.
Tested: enabled f_ncm on a dwc3 gadget and 10Gbps link, ran iperf
Reviewed-by: Maciej Żenczykowski <[email protected]>
Signed-off-by: Lorenzo Colitti <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_ncm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 7672fa25085b0..92a7c3a839454 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -1536,7 +1536,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
fs_ncm_notify_desc.bEndpointAddress;
status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function,
- ncm_ss_function, NULL);
+ ncm_ss_function, ncm_ss_function);
if (status)
goto fail;
--
2.25.1
From: Can Guo <[email protected]>
[ Upstream commit 89dd87acd40a44de8ff3358138aedf8f73f4efc6 ]
If ufs_qcom_dump_dbg_regs() calls ufs_qcom_testbus_config() from
ufshcd_suspend/resume and/or clk gate/ungate context, pm_runtime_get_sync()
and ufshcd_hold() will cause a race condition. Fix this by removing the
unnecessary calls of pm_runtime_get_sync() and ufshcd_hold().
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hongwu Su <[email protected]>
Reviewed-by: Avri Altman <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Reviewed-by: Asutosh Das <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufs-qcom.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 2e6ddb5cdfc23..7da27eed1fe7b 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1604,9 +1604,6 @@ int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
*/
}
mask <<= offset;
-
- pm_runtime_get_sync(host->hba->dev);
- ufshcd_hold(host->hba, false);
ufshcd_rmwl(host->hba, TEST_BUS_SEL,
(u32)host->testbus.select_major << 19,
REG_UFS_CFG1);
@@ -1619,8 +1616,6 @@ int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
* committed before returning.
*/
mb();
- ufshcd_release(host->hba);
- pm_runtime_put_sync(host->hba->dev);
return 0;
}
--
2.25.1
From: Serge Semin <[email protected]>
[ Upstream commit e8ee6c8cb61b676f1a2d6b942329e98224bd8ee9 ]
DW DMA IP-core provides a way to synthesize the DMA controller with
channels having different parameters like maximum burst-length,
multi-block support, maximum data width, etc. Those parameters both
explicitly and implicitly affect the channels performance. Since DMA slave
devices might be very demanding to the DMA performance, let's provide a
functionality for the slaves to be assigned with DW DMA channels, which
performance according to the platform engineer fulfill their requirements.
After this patch is applied it can be done by passing the mask of suitable
DMA-channels either directly in the dw_dma_slave structure instance or as
a fifth cell of the DMA DT-property. If mask is zero or not provided, then
there is no limitation on the channels allocation.
For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first
two channels are synthesized with max burst length of 16, while the rest
of the channels have been created with max-burst-len=4. It would seem that
the first two channels must be faster than the others and should be more
preferable for the time-critical DMA slave devices. In practice it turned
out that the situation is quite the opposite. The channels with
max-burst-len=4 demonstrated a better performance than the channels with
max-burst-len=16 even when they both had been initialized with the same
settings. The performance drop of the first two DMA-channels made them
unsuitable for the DW APB SSI slave device. No matter what settings they
are configured with, full-duplex SPI transfers occasionally experience the
Rx FIFO overflow. It means that the DMA-engine doesn't keep up with
incoming data pace even though the SPI-bus is enabled with speed of 25MHz
while the DW DMA controller is clocked with 50MHz signal. There is no such
problem has been noticed for the channels synthesized with
max-burst-len=4.
Signed-off-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/dw/core.c | 4 ++++
drivers/dma/dw/of.c | 7 +++++--
include/linux/platform_data/dma-dw.h | 2 ++
3 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index a1b56f52db2f2..5e7fdc0b6e3db 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -772,6 +772,10 @@ bool dw_dma_filter(struct dma_chan *chan, void *param)
if (dws->dma_dev != chan->device->dev)
return false;
+ /* permit channels in accordance with the channels mask */
+ if (dws->channels && !(dws->channels & dwc->mask))
+ return false;
+
/* We have to copy data since dws can be temporary storage */
memcpy(&dwc->dws, dws, sizeof(struct dw_dma_slave));
diff --git a/drivers/dma/dw/of.c b/drivers/dma/dw/of.c
index 9e27831dee324..43e975fb67142 100644
--- a/drivers/dma/dw/of.c
+++ b/drivers/dma/dw/of.c
@@ -22,18 +22,21 @@ static struct dma_chan *dw_dma_of_xlate(struct of_phandle_args *dma_spec,
};
dma_cap_mask_t cap;
- if (dma_spec->args_count != 3)
+ if (dma_spec->args_count < 3 || dma_spec->args_count > 4)
return NULL;
slave.src_id = dma_spec->args[0];
slave.dst_id = dma_spec->args[0];
slave.m_master = dma_spec->args[1];
slave.p_master = dma_spec->args[2];
+ if (dma_spec->args_count >= 4)
+ slave.channels = dma_spec->args[3];
if (WARN_ON(slave.src_id >= DW_DMA_MAX_NR_REQUESTS ||
slave.dst_id >= DW_DMA_MAX_NR_REQUESTS ||
slave.m_master >= dw->pdata->nr_masters ||
- slave.p_master >= dw->pdata->nr_masters))
+ slave.p_master >= dw->pdata->nr_masters ||
+ slave.channels >= BIT(dw->pdata->nr_channels)))
return NULL;
dma_cap_zero(cap);
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index f3eaf9ec00a1b..70078be166e3c 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -21,6 +21,7 @@
* @dst_id: dst request line
* @m_master: memory master for transfers on allocated channel
* @p_master: peripheral master for transfers on allocated channel
+ * @channels: mask of the channels permitted for allocation (zero value means any)
* @hs_polarity:set active low polarity of handshake interface
*/
struct dw_dma_slave {
@@ -29,6 +30,7 @@ struct dw_dma_slave {
u8 dst_id;
u8 m_master;
u8 p_master;
+ u8 channels;
bool hs_polarity;
};
--
2.25.1
From: Sathyanarayana Nujella <[email protected]>
[ Upstream commit 5253a73d567dcd75e62834ff5f502ea9470e5722 ]
Add topology filename override based on system DMI data matching,
typically to account for a different hardware layout.
In ACPI based systems, the tplg_filename is pre-defined in an ACPI
machine table. When a DMI quirk is detected, the
sof_pdata->tplg_filename is not set with the hard-coded ACPI value,
and instead is set with the DMI-specific filename.
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Sathyanarayana Nujella <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/hda.c | 8 +++++++-
sound/soc/sof/sof-pci-dev.c | 24 ++++++++++++++++++++++++
2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 63ca920c8e6e0..7152e6d1cf673 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -1179,7 +1179,13 @@ void hda_machine_select(struct snd_sof_dev *sdev)
mach = snd_soc_acpi_find_machine(desc->machines);
if (mach) {
- sof_pdata->tplg_filename = mach->sof_tplg_filename;
+ /*
+ * If tplg file name is overridden, use it instead of
+ * the one set in mach table
+ */
+ if (!sof_pdata->tplg_filename)
+ sof_pdata->tplg_filename = mach->sof_tplg_filename;
+
sof_pdata->machine = mach;
if (mach->link_mask) {
diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index aa3532ba14349..f3a8140773db5 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -35,8 +35,28 @@ static int sof_pci_debug;
module_param_named(sof_pci_debug, sof_pci_debug, int, 0444);
MODULE_PARM_DESC(sof_pci_debug, "SOF PCI debug options (0x0 all off)");
+static const char *sof_override_tplg_name;
+
#define SOF_PCI_DISABLE_PM_RUNTIME BIT(0)
+static int sof_tplg_cb(const struct dmi_system_id *id)
+{
+ sof_override_tplg_name = id->driver_data;
+ return 1;
+}
+
+static const struct dmi_system_id sof_tplg_table[] = {
+ {
+ .callback = sof_tplg_cb,
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Volteer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Terrador"),
+ },
+ .driver_data = "sof-tgl-rt5682-ssp0-max98373-ssp2.tplg",
+ },
+ {}
+};
+
static const struct dmi_system_id community_key_platforms[] = {
{
.ident = "Up Squared",
@@ -347,6 +367,10 @@ static int sof_pci_probe(struct pci_dev *pci,
sof_pdata->tplg_filename_prefix =
sof_pdata->desc->default_tplg_path;
+ dmi_check_system(sof_tplg_table);
+ if (sof_override_tplg_name)
+ sof_pdata->tplg_filename = sof_override_tplg_name;
+
#if IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)
/* set callback to enable runtime_pm */
sof_pdata->sof_probe_complete = sof_pci_probe_complete;
--
2.25.1
From: Julian Wiedmann <[email protected]>
[ Upstream commit 9d6a569a4cbab5a8b4c959d4e312daeecb7c9f09 ]
The current code for bridge address events has two shortcomings in its
control sequence:
1. after disabling address events via PNSO, we don't flush the remaining
events from the event_wq. So if the feature is re-enabled fast
enough, stale events could leak over.
2. PNSO and the events' arrival via the READ ccw device are unordered.
So even if we flushed the workqueue, it's difficult to say whether
the READ device might produce more events onto the workqueue
afterwards.
Fix this by
1. explicitly fencing off the events when we no longer care, in the
READ device's event handler. This ensures that once we flush the
workqueue, it doesn't get additional address events.
2. Flush the workqueue after disabling the events & fencing them off.
As the code that triggers the flush will typically hold the sbp_lock,
we need to rework the worker code to avoid a deadlock here in case
of a 'notifications-stopped' event. In case of lock contention,
requeue such an event with a delay. We'll eventually aquire the lock,
or spot that the feature has been disabled and the event can thus be
discarded.
This leaves the theoretical race that a stale event could arrive
_after_ we re-enabled ourselves to receive events again. Such an event
would be impossible to distinguish from a 'good' event, nothing we can
do about it.
Signed-off-by: Julian Wiedmann <[email protected]>
Reviewed-by: Alexandra Winter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/qeth_core.h | 6 ++++
drivers/s390/net/qeth_l2_main.c | 53 ++++++++++++++++++++++++++++-----
drivers/s390/net/qeth_l2_sys.c | 1 +
3 files changed, 52 insertions(+), 8 deletions(-)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 51ea56b73a97d..4e30047d76c46 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -680,6 +680,11 @@ struct qeth_card_blkt {
int inter_packet_jumbo;
};
+enum qeth_pnso_mode {
+ QETH_PNSO_NONE,
+ QETH_PNSO_BRIDGEPORT,
+};
+
#define QETH_BROADCAST_WITH_ECHO 0x01
#define QETH_BROADCAST_WITHOUT_ECHO 0x02
struct qeth_card_info {
@@ -696,6 +701,7 @@ struct qeth_card_info {
/* no bitfield, we take a pointer on these two: */
u8 has_lp2lp_cso_v6;
u8 has_lp2lp_cso_v4;
+ enum qeth_pnso_mode pnso_mode;
enum qeth_card_types type;
enum qeth_link_types link_type;
int broadcast_capable;
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index b4e06aeb6dc1c..0384b45a72658 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -273,6 +273,17 @@ static int qeth_l2_vlan_rx_kill_vid(struct net_device *dev,
return qeth_l2_send_setdelvlan(card, vid, IPA_CMD_DELVLAN);
}
+static void qeth_l2_set_pnso_mode(struct qeth_card *card,
+ enum qeth_pnso_mode mode)
+{
+ spin_lock_irq(get_ccwdev_lock(CARD_RDEV(card)));
+ WRITE_ONCE(card->info.pnso_mode, mode);
+ spin_unlock_irq(get_ccwdev_lock(CARD_RDEV(card)));
+
+ if (mode == QETH_PNSO_NONE)
+ drain_workqueue(card->event_wq);
+}
+
static void qeth_l2_stop_card(struct qeth_card *card)
{
QETH_CARD_TEXT(card, 2, "stopcard");
@@ -291,7 +302,7 @@ static void qeth_l2_stop_card(struct qeth_card *card)
qeth_qdio_clear_card(card, 0);
qeth_clear_working_pool_list(card);
- flush_workqueue(card->event_wq);
+ qeth_l2_set_pnso_mode(card, QETH_PNSO_NONE);
qeth_flush_local_addrs(card);
card->info.promisc_mode = 0;
}
@@ -1165,19 +1176,34 @@ static void qeth_bridge_state_change(struct qeth_card *card,
}
struct qeth_addr_change_data {
- struct work_struct worker;
+ struct delayed_work dwork;
struct qeth_card *card;
struct qeth_ipacmd_addr_change ac_event;
};
static void qeth_addr_change_event_worker(struct work_struct *work)
{
- struct qeth_addr_change_data *data =
- container_of(work, struct qeth_addr_change_data, worker);
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct qeth_addr_change_data *data;
+ struct qeth_card *card;
int i;
+ data = container_of(dwork, struct qeth_addr_change_data, dwork);
+ card = data->card;
+
QETH_CARD_TEXT(data->card, 4, "adrchgew");
+
+ if (READ_ONCE(card->info.pnso_mode) == QETH_PNSO_NONE)
+ goto free;
+
if (data->ac_event.lost_event_mask) {
+ /* Potential re-config in progress, try again later: */
+ if (!mutex_trylock(&card->sbp_lock)) {
+ queue_delayed_work(card->event_wq, dwork,
+ msecs_to_jiffies(100));
+ return;
+ }
+
dev_info(&data->card->gdev->dev,
"Address change notification stopped on %s (%s)\n",
data->card->dev->name,
@@ -1186,8 +1212,9 @@ static void qeth_addr_change_event_worker(struct work_struct *work)
: (data->ac_event.lost_event_mask == 0x02)
? "Bridge port state change"
: "Unknown reason");
- mutex_lock(&data->card->sbp_lock);
+
data->card->options.sbp.hostnotification = 0;
+ card->info.pnso_mode = QETH_PNSO_NONE;
mutex_unlock(&data->card->sbp_lock);
qeth_bridge_emit_host_event(data->card, anev_abort,
0, NULL, NULL);
@@ -1201,6 +1228,8 @@ static void qeth_addr_change_event_worker(struct work_struct *work)
&entry->token,
&entry->addr_lnid);
}
+
+free:
kfree(data);
}
@@ -1212,6 +1241,9 @@ static void qeth_addr_change_event(struct qeth_card *card,
struct qeth_addr_change_data *data;
int extrasize;
+ if (card->info.pnso_mode == QETH_PNSO_NONE)
+ return;
+
QETH_CARD_TEXT(card, 4, "adrchgev");
if (cmd->hdr.return_code != 0x0000) {
if (cmd->hdr.return_code == 0x0010) {
@@ -1231,11 +1263,11 @@ static void qeth_addr_change_event(struct qeth_card *card,
QETH_CARD_TEXT(card, 2, "ACNalloc");
return;
}
- INIT_WORK(&data->worker, qeth_addr_change_event_worker);
+ INIT_DELAYED_WORK(&data->dwork, qeth_addr_change_event_worker);
data->card = card;
memcpy(&data->ac_event, hostevs,
sizeof(struct qeth_ipacmd_addr_change) + extrasize);
- queue_work(card->event_wq, &data->worker);
+ queue_delayed_work(card->event_wq, &data->dwork, 0);
}
/* SETBRIDGEPORT support; sending commands */
@@ -1556,9 +1588,14 @@ int qeth_bridgeport_an_set(struct qeth_card *card, int enable)
if (enable) {
qeth_bridge_emit_host_event(card, anev_reset, 0, NULL, NULL);
+ qeth_l2_set_pnso_mode(card, QETH_PNSO_BRIDGEPORT);
rc = qeth_l2_pnso(card, 1, qeth_bridgeport_an_set_cb, card);
- } else
+ if (rc)
+ qeth_l2_set_pnso_mode(card, QETH_PNSO_NONE);
+ } else {
rc = qeth_l2_pnso(card, 0, NULL, NULL);
+ qeth_l2_set_pnso_mode(card, QETH_PNSO_NONE);
+ }
return rc;
}
diff --git a/drivers/s390/net/qeth_l2_sys.c b/drivers/s390/net/qeth_l2_sys.c
index 86bcae992f725..4695d25e54f24 100644
--- a/drivers/s390/net/qeth_l2_sys.c
+++ b/drivers/s390/net/qeth_l2_sys.c
@@ -157,6 +157,7 @@ static ssize_t qeth_bridgeport_hostnotification_store(struct device *dev,
rc = -EBUSY;
else if (qeth_card_hw_is_reachable(card)) {
rc = qeth_bridgeport_an_set(card, enable);
+ /* sbp_lock ensures ordering vs notifications-stopped events */
if (!rc)
card->options.sbp.hostnotification = enable;
} else
--
2.25.1
From: Doug Horn <[email protected]>
[ Upstream commit e219688fc5c3d0d9136f8d29d7e0498388f01440 ]
If a response to virtio_gpu_cmd_get_capset_info takes longer than
five seconds to return, the callback will access freed kernel memory
in vg->capsets.
Signed-off-by: Doug Horn <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/virtio/virtgpu_kms.c | 2 ++
drivers/gpu/drm/virtio/virtgpu_vq.c | 10 +++++++---
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c
index 0a5c8cf409fb8..dc8cb8dfce58e 100644
--- a/drivers/gpu/drm/virtio/virtgpu_kms.c
+++ b/drivers/gpu/drm/virtio/virtgpu_kms.c
@@ -80,8 +80,10 @@ static void virtio_gpu_get_capsets(struct virtio_gpu_device *vgdev,
vgdev->capsets[i].id > 0, 5 * HZ);
if (ret == 0) {
DRM_ERROR("timed out waiting for cap set %d\n", i);
+ spin_lock(&vgdev->display_info_lock);
kfree(vgdev->capsets);
vgdev->capsets = NULL;
+ spin_unlock(&vgdev->display_info_lock);
return;
}
DRM_INFO("cap set %d: id %d, max-version %d, max-size %d\n",
diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c
index 9e663a5d99526..2517450bf46ba 100644
--- a/drivers/gpu/drm/virtio/virtgpu_vq.c
+++ b/drivers/gpu/drm/virtio/virtgpu_vq.c
@@ -684,9 +684,13 @@ static void virtio_gpu_cmd_get_capset_info_cb(struct virtio_gpu_device *vgdev,
int i = le32_to_cpu(cmd->capset_index);
spin_lock(&vgdev->display_info_lock);
- vgdev->capsets[i].id = le32_to_cpu(resp->capset_id);
- vgdev->capsets[i].max_version = le32_to_cpu(resp->capset_max_version);
- vgdev->capsets[i].max_size = le32_to_cpu(resp->capset_max_size);
+ if (vgdev->capsets) {
+ vgdev->capsets[i].id = le32_to_cpu(resp->capset_id);
+ vgdev->capsets[i].max_version = le32_to_cpu(resp->capset_max_version);
+ vgdev->capsets[i].max_size = le32_to_cpu(resp->capset_max_size);
+ } else {
+ DRM_ERROR("invalid capset memory.");
+ }
spin_unlock(&vgdev->display_info_lock);
wake_up(&vgdev->resp_wq);
}
--
2.25.1
From: George Kennedy <[email protected]>
[ Upstream commit a49145acfb975d921464b84fe00279f99827d816 ]
A fb_ioctl() FBIOPUT_VSCREENINFO call with invalid xres setting
or yres setting in struct fb_var_screeninfo will result in a
KASAN: vmalloc-out-of-bounds failure in bitfill_aligned() as
the margins are being cleared. The margins are cleared in
chunks and if the xres setting or yres setting is a value of
zero upto the chunk size, the failure will occur.
Add a margin check to validate xres and yres settings.
Signed-off-by: George Kennedy <[email protected]>
Reported-by: [email protected]
Reviewed-by: Dan Carpenter <[email protected]>
Cc: Dhaval Giani <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/core/fbmem.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index da7c88ffaa6a8..1136b569ccb7c 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1006,6 +1006,10 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
return 0;
}
+ /* bitfill_aligned() assumes that it's at least 8x8 */
+ if (var->xres < 8 || var->yres < 8)
+ return -EINVAL;
+
ret = info->fbops->fb_check_var(var, info);
if (ret)
--
2.25.1
From: Kevin Barnett <[email protected]>
[ Upstream commit 9e68cccc8ef7206f0bccd590378d0dca8f9b4f57 ]
Eliminate kernel panics when getting invalid responses from controller.
Take controller offline instead of causing kernel panics.
Link: https://lore.kernel.org/r/159622929306.30579.16523318707596752828.stgit@brunhilda
Reviewed-by: Scott Teel <[email protected]>
Reviewed-by: Scott Benesh <[email protected]>
Reviewed-by: Prasad Munirathnam <[email protected]>
Reviewed-by: Martin Wilck <[email protected]>
Signed-off-by: Kevin Barnett <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/smartpqi/smartpqi.h | 2 +-
drivers/scsi/smartpqi/smartpqi_init.c | 101 +++++++++++++++++---------
2 files changed, 68 insertions(+), 35 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 1129fe7a27edd..ee069a8b442a7 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -359,7 +359,7 @@ struct pqi_event_response {
struct pqi_iu_header header;
u8 event_type;
u8 reserved2 : 7;
- u8 request_acknowlege : 1;
+ u8 request_acknowledge : 1;
__le16 event_id;
__le32 additional_event_id;
union {
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index cd157f11eb222..10afbaaa4a82f 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -542,8 +542,7 @@ static int pqi_build_raid_path_request(struct pqi_ctrl_info *ctrl_info,
put_unaligned_be16(cdb_length, &cdb[7]);
break;
default:
- dev_err(&ctrl_info->pci_dev->dev, "unknown command 0x%c\n",
- cmd);
+ dev_err(&ctrl_info->pci_dev->dev, "unknown command 0x%c\n", cmd);
break;
}
@@ -2462,7 +2461,6 @@ static int pqi_raid_bypass_submit_scsi_cmd(struct pqi_ctrl_info *ctrl_info,
offload_to_mirror =
(offload_to_mirror >= layout_map_count - 1) ?
0 : offload_to_mirror + 1;
- WARN_ON(offload_to_mirror >= layout_map_count);
device->offload_to_mirror = offload_to_mirror;
/*
* Avoid direct use of device->offload_to_mirror within this
@@ -2915,10 +2913,14 @@ static int pqi_interpret_task_management_response(
return rc;
}
-static unsigned int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info,
- struct pqi_queue_group *queue_group)
+static inline void pqi_invalid_response(struct pqi_ctrl_info *ctrl_info)
+{
+ pqi_take_ctrl_offline(ctrl_info);
+}
+
+static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue_group *queue_group)
{
- unsigned int num_responses;
+ int num_responses;
pqi_index_t oq_pi;
pqi_index_t oq_ci;
struct pqi_io_request *io_request;
@@ -2930,6 +2932,13 @@ static unsigned int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info,
while (1) {
oq_pi = readl(queue_group->oq_pi);
+ if (oq_pi >= ctrl_info->num_elements_per_oq) {
+ pqi_invalid_response(ctrl_info);
+ dev_err(&ctrl_info->pci_dev->dev,
+ "I/O interrupt: producer index (%u) out of range (0-%u): consumer index: %u\n",
+ oq_pi, ctrl_info->num_elements_per_oq - 1, oq_ci);
+ return -1;
+ }
if (oq_pi == oq_ci)
break;
@@ -2938,10 +2947,22 @@ static unsigned int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info,
(oq_ci * PQI_OPERATIONAL_OQ_ELEMENT_LENGTH);
request_id = get_unaligned_le16(&response->request_id);
- WARN_ON(request_id >= ctrl_info->max_io_slots);
+ if (request_id >= ctrl_info->max_io_slots) {
+ pqi_invalid_response(ctrl_info);
+ dev_err(&ctrl_info->pci_dev->dev,
+ "request ID in response (%u) out of range (0-%u): producer index: %u consumer index: %u\n",
+ request_id, ctrl_info->max_io_slots - 1, oq_pi, oq_ci);
+ return -1;
+ }
io_request = &ctrl_info->io_request_pool[request_id];
- WARN_ON(atomic_read(&io_request->refcount) == 0);
+ if (atomic_read(&io_request->refcount) == 0) {
+ pqi_invalid_response(ctrl_info);
+ dev_err(&ctrl_info->pci_dev->dev,
+ "request ID in response (%u) does not match an outstanding I/O request: producer index: %u consumer index: %u\n",
+ request_id, oq_pi, oq_ci);
+ return -1;
+ }
switch (response->header.iu_type) {
case PQI_RESPONSE_IU_RAID_PATH_IO_SUCCESS:
@@ -2971,24 +2992,22 @@ static unsigned int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info,
io_request->error_info = ctrl_info->error_buffer +
(get_unaligned_le16(&response->error_index) *
PQI_ERROR_BUFFER_ELEMENT_LENGTH);
- pqi_process_io_error(response->header.iu_type,
- io_request);
+ pqi_process_io_error(response->header.iu_type, io_request);
break;
default:
+ pqi_invalid_response(ctrl_info);
dev_err(&ctrl_info->pci_dev->dev,
- "unexpected IU type: 0x%x\n",
- response->header.iu_type);
- break;
+ "unexpected IU type: 0x%x: producer index: %u consumer index: %u\n",
+ response->header.iu_type, oq_pi, oq_ci);
+ return -1;
}
- io_request->io_complete_callback(io_request,
- io_request->context);
+ io_request->io_complete_callback(io_request, io_request->context);
/*
* Note that the I/O request structure CANNOT BE TOUCHED after
* returning from the I/O completion callback!
*/
-
oq_ci = (oq_ci + 1) % ctrl_info->num_elements_per_oq;
}
@@ -3301,9 +3320,9 @@ static void pqi_ofa_capture_event_payload(struct pqi_event *event,
}
}
-static unsigned int pqi_process_event_intr(struct pqi_ctrl_info *ctrl_info)
+static int pqi_process_event_intr(struct pqi_ctrl_info *ctrl_info)
{
- unsigned int num_events;
+ int num_events;
pqi_index_t oq_pi;
pqi_index_t oq_ci;
struct pqi_event_queue *event_queue;
@@ -3317,26 +3336,31 @@ static unsigned int pqi_process_event_intr(struct pqi_ctrl_info *ctrl_info)
while (1) {
oq_pi = readl(event_queue->oq_pi);
+ if (oq_pi >= PQI_NUM_EVENT_QUEUE_ELEMENTS) {
+ pqi_invalid_response(ctrl_info);
+ dev_err(&ctrl_info->pci_dev->dev,
+ "event interrupt: producer index (%u) out of range (0-%u): consumer index: %u\n",
+ oq_pi, PQI_NUM_EVENT_QUEUE_ELEMENTS - 1, oq_ci);
+ return -1;
+ }
+
if (oq_pi == oq_ci)
break;
num_events++;
- response = event_queue->oq_element_array +
- (oq_ci * PQI_EVENT_OQ_ELEMENT_LENGTH);
+ response = event_queue->oq_element_array + (oq_ci * PQI_EVENT_OQ_ELEMENT_LENGTH);
event_index =
pqi_event_type_to_event_index(response->event_type);
- if (event_index >= 0) {
- if (response->request_acknowlege) {
- event = &ctrl_info->events[event_index];
- event->pending = true;
- event->event_type = response->event_type;
- event->event_id = response->event_id;
- event->additional_event_id =
- response->additional_event_id;
+ if (event_index >= 0 && response->request_acknowledge) {
+ event = &ctrl_info->events[event_index];
+ event->pending = true;
+ event->event_type = response->event_type;
+ event->event_id = response->event_id;
+ event->additional_event_id = response->additional_event_id;
+ if (event->event_type == PQI_EVENT_TYPE_OFA)
pqi_ofa_capture_event_payload(event, response);
- }
}
oq_ci = (oq_ci + 1) % PQI_NUM_EVENT_QUEUE_ELEMENTS;
@@ -3451,7 +3475,8 @@ static irqreturn_t pqi_irq_handler(int irq, void *data)
{
struct pqi_ctrl_info *ctrl_info;
struct pqi_queue_group *queue_group;
- unsigned int num_responses_handled;
+ int num_io_responses_handled;
+ int num_events_handled;
queue_group = data;
ctrl_info = queue_group->ctrl_info;
@@ -3459,17 +3484,25 @@ static irqreturn_t pqi_irq_handler(int irq, void *data)
if (!pqi_is_valid_irq(ctrl_info))
return IRQ_NONE;
- num_responses_handled = pqi_process_io_intr(ctrl_info, queue_group);
+ num_io_responses_handled = pqi_process_io_intr(ctrl_info, queue_group);
+ if (num_io_responses_handled < 0)
+ goto out;
- if (irq == ctrl_info->event_irq)
- num_responses_handled += pqi_process_event_intr(ctrl_info);
+ if (irq == ctrl_info->event_irq) {
+ num_events_handled = pqi_process_event_intr(ctrl_info);
+ if (num_events_handled < 0)
+ goto out;
+ } else {
+ num_events_handled = 0;
+ }
- if (num_responses_handled)
+ if (num_io_responses_handled + num_events_handled > 0)
atomic_inc(&ctrl_info->num_interrupts);
pqi_start_io(ctrl_info, queue_group, RAID_PATH, NULL);
pqi_start_io(ctrl_info, queue_group, AIO_PATH, NULL);
+out:
return IRQ_HANDLED;
}
--
2.25.1
From: Christian Eggers <[email protected]>
commit 284f52ac1c6cfa1b2e5c11b84653dd90e4e91de7 upstream.
SPI eeproms are addressed by byte.
Signed-off-by: Christian Eggers <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/eeprom/at25.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -358,7 +358,7 @@ static int at25_probe(struct spi_device
at25->nvmem_config.reg_read = at25_ee_read;
at25->nvmem_config.reg_write = at25_ee_write;
at25->nvmem_config.priv = at25;
- at25->nvmem_config.stride = 4;
+ at25->nvmem_config.stride = 1;
at25->nvmem_config.word_size = 1;
at25->nvmem_config.size = chip.byte_len;
From: Vincent Mailhol <[email protected]>
commit a4f88430af896bf34ec25a7a5f0e053fb3d928e0 upstream.
The ES58X devices has a CDC ACM interface (used for debug
purpose). During probing, the device is thus recognized as USB Modem
(CDC ACM), preventing the etas-es58x module to load:
usbcore: registered new interface driver etas_es58x
usb 1-1.1: new full-speed USB device number 14 using xhci_hcd
usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: ES581.4
usb 1-1.1: Manufacturer: ETAS GmbH
usb 1-1.1: SerialNumber: 2204355
cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device
cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
Thus, these have been added to the ignore list in
drivers/usb/class/cdc-acm.c
N.B. Future firmware release of the ES58X will remove the CDC-ACM
interface.
`lsusb -v` of the three devices variant (ES581.4, ES582.1 and
ES584.1):
Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0159
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES581.4
iSerial 3 2204355
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0035
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 5 Bus Powered Configuration
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0
iInterface 4 ACM Control Interface
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x01
call management
bDataInterface 0
CDC ACM:
bmCapabilities 0x06
sends break
line coding and serial state
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0168
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES582
iSerial 3 0108933
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0043
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0169
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES584.1
iSerial 3 0100320
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0043
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Signed-off-by: Vincent Mailhol <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1912,6 +1912,17 @@ static const struct usb_device_id acm_id
.driver_info = IGNORE_DEVICE,
},
+ /* Exclude ETAS ES58x */
+ { USB_DEVICE(0x108c, 0x0159), /* ES581.4 */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x108c, 0x0168), /* ES582.1 */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x108c, 0x0169), /* ES584.1 */
+ .driver_info = IGNORE_DEVICE,
+ },
+
{ USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
.driver_info = SEND_ZERO_PACKET,
},
From: Oliver Neukum <[email protected]>
commit 37d2a36394d954413a495da61da1b2a51ecd28ab upstream.
syzbot is reporting hung task at wdm_flush() [1], for there is a circular
dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever
waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget
cannot be called unless close() for /dev/cdc-wdm0 completes.
Tetsuo Handa considered that such circular dependency is an usage error [2]
which corresponds to an unresponding broken hardware [3]. But Alan Stern
responded that we should be prepared for such hardware [4]. Therefore,
this patch changes wdm_flush() to use wait_event_interruptible_timeout()
which gives up after 30 seconds, for hardware that remains silent must be
ignored. The 30 seconds are coming out of thin air.
Changing wait_event() to wait_event_interruptible_timeout() makes error
reporting from close() syscall less reliable. To compensate it, this patch
also implements wdm_fsync() which does not use timeout. Those who want to
be very sure that data has gone out to the device are now advised to call
fsync(), with a caveat that fsync() can return -EINVAL when running on
older kernels which do not implement wdm_fsync().
This patch also fixes three more problems (listed below) found during
exhaustive discussion and testing.
Since multiple threads can concurrently call wdm_write()/wdm_flush(),
we need to use wake_up_all() whenever clearing WDM_IN_USE in order to
make sure that all waiters are woken up. Also, error reporting needs
to use fetch-and-clear approach in order not to report same error for
multiple times.
Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well
check WDM_DISCONNECTING.
In wdm_flush(), since locks are not held, it is not safe to dereference
desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus,
remove dev_err() from wdm_flush().
[1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
[4] https://lkml.kernel.org/r/[email protected]
[5] https://lkml.kernel.org/r/[email protected]
Reported-by: syzbot <[email protected]>
Cc: stable <[email protected]>
Co-developed-by: Tetsuo Handa <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Oliver Neukum <[email protected]>
Cc: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-wdm.c | 70 +++++++++++++++++++++++++++++++++-----------
1 file changed, 54 insertions(+), 16 deletions(-)
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -58,6 +58,9 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
#define WDM_MAX 16
+/* we cannot wait forever at flush() */
+#define WDM_FLUSH_TIMEOUT (30 * HZ)
+
/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
#define WDM_DEFAULT_BUFSIZE 256
@@ -151,7 +154,7 @@ static void wdm_out_callback(struct urb
kfree(desc->outbuf);
desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
- wake_up(&desc->wait);
+ wake_up_all(&desc->wait);
}
static void wdm_in_callback(struct urb *urb)
@@ -393,6 +396,9 @@ static ssize_t wdm_write
if (test_bit(WDM_RESETTING, &desc->flags))
r = -EIO;
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ r = -ENODEV;
+
if (r < 0) {
rv = r;
goto out_free_mem_pm;
@@ -424,6 +430,7 @@ static ssize_t wdm_write
if (rv < 0) {
desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
+ wake_up_all(&desc->wait); /* for wdm_wait_for_response() */
dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
rv = usb_translate_errors(rv);
goto out_free_mem_pm;
@@ -583,28 +590,58 @@ err:
return rv;
}
-static int wdm_flush(struct file *file, fl_owner_t id)
+static int wdm_wait_for_response(struct file *file, long timeout)
{
struct wdm_device *desc = file->private_data;
+ long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */
- wait_event(desc->wait,
- /*
- * needs both flags. We cannot do with one
- * because resetting it would cause a race
- * with write() yet we need to signal
- * a disconnect
- */
- !test_bit(WDM_IN_USE, &desc->flags) ||
- test_bit(WDM_DISCONNECTING, &desc->flags));
+ /*
+ * Needs both flags. We cannot do with one because resetting it would
+ * cause a race with write() yet we need to signal a disconnect.
+ */
+ rv = wait_event_interruptible_timeout(desc->wait,
+ !test_bit(WDM_IN_USE, &desc->flags) ||
+ test_bit(WDM_DISCONNECTING, &desc->flags),
+ timeout);
- /* cannot dereference desc->intf if WDM_DISCONNECTING */
+ /*
+ * To report the correct error. This is best effort.
+ * We are inevitably racing with the hardware.
+ */
if (test_bit(WDM_DISCONNECTING, &desc->flags))
return -ENODEV;
- if (desc->werr < 0)
- dev_err(&desc->intf->dev, "Error in flush path: %d\n",
- desc->werr);
+ if (!rv)
+ return -EIO;
+ if (rv < 0)
+ return -EINTR;
+
+ spin_lock_irq(&desc->iuspin);
+ rv = desc->werr;
+ desc->werr = 0;
+ spin_unlock_irq(&desc->iuspin);
- return usb_translate_errors(desc->werr);
+ return usb_translate_errors(rv);
+
+}
+
+/*
+ * You need to send a signal when you react to malicious or defective hardware.
+ * Also, don't abort when fsync() returned -EINVAL, for older kernels which do
+ * not implement wdm_flush() will return -EINVAL.
+ */
+static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync)
+{
+ return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT);
+}
+
+/*
+ * Same with wdm_fsync(), except it uses finite timeout in order to react to
+ * malicious or defective hardware which ceased communication after close() was
+ * implicitly called due to process termination.
+ */
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+ return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT);
}
static __poll_t wdm_poll(struct file *file, struct poll_table_struct *wait)
@@ -729,6 +766,7 @@ static const struct file_operations wdm_
.owner = THIS_MODULE,
.read = wdm_read,
.write = wdm_write,
+ .fsync = wdm_fsync,
.open = wdm_open,
.flush = wdm_flush,
.release = wdm_release,
From: Wang Yufen <[email protected]>
[ Upstream commit 6c151410d5b57e6bb0d91a735ac511459539a7bf ]
When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL,
we should destroy the workqueue.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
index 8bb4f1fa790e7..1bb270e782ff2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -1619,6 +1619,8 @@ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
BRCMF_TX_IOCTL_MAX_MSG_SIZE,
msgbuf->ioctbuf,
msgbuf->ioctbuf_handle);
+ if (msgbuf->txflow_wq)
+ destroy_workqueue(msgbuf->txflow_wq);
kfree(msgbuf);
}
return -ENOMEM;
--
2.25.1
From: Darrick J. Wong <[email protected]>
[ Upstream commit 2a6ca4baed620303d414934aa1b7b0a8e7bab05f ]
There's an overflow bug in the realtime allocator. If the rt volume is
large enough to handle a single allocation request that is larger than
the maximum bmap extent length and the rt bitmap ends exactly on a
bitmap block boundary, it's possible that the near allocator will try to
check the freeness of a range that extends past the end of the bitmap.
This fails with a corruption error and shuts down the fs.
Therefore, constrain maxlen so that the range scan cannot run off the
end of the rt bitmap.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/xfs/xfs_rtalloc.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 6209e7b6b895b..86994d7f7cba3 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -247,6 +247,9 @@ xfs_rtallocate_extent_block(
end = XFS_BLOCKTOBIT(mp, bbno + 1) - 1;
i <= end;
i++) {
+ /* Make sure we don't scan off the end of the rt volume. */
+ maxlen = min(mp->m_sb.sb_rextents, i + maxlen) - i;
+
/*
* See if there's a free extent of maxlen starting at i.
* If it's not so then next will contain the first non-free.
@@ -442,6 +445,14 @@ xfs_rtallocate_extent_near(
*/
if (bno >= mp->m_sb.sb_rextents)
bno = mp->m_sb.sb_rextents - 1;
+
+ /* Make sure we don't run off the end of the rt volume. */
+ maxlen = min(mp->m_sb.sb_rextents, bno + maxlen) - bno;
+ if (maxlen < minlen) {
+ *rtblock = NULLRTBLOCK;
+ return 0;
+ }
+
/*
* Try the exact allocation first.
*/
--
2.25.1
From: Sathyanarayana Nujella <[email protected]>
[ Upstream commit 3e1734b64ce786c54dc98adcfe67941e6011d735 ]
A Chrome System based on tgl_max98373_rt5682 has different SSP interface
configurations. Using DMI data of this variant DUT, override quirk
data.
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Sathyanarayana Nujella <[email protected]>
Signed-off-by: Mac Chiang <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/sof_rt5682.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c
index 13a48b0c35aef..11233c3aeadfb 100644
--- a/sound/soc/intel/boards/sof_rt5682.c
+++ b/sound/soc/intel/boards/sof_rt5682.c
@@ -118,6 +118,19 @@ static const struct dmi_system_id sof_rt5682_quirk_table[] = {
.driver_data = (void *)(SOF_RT5682_MCLK_EN |
SOF_RT5682_SSP_CODEC(0)),
},
+ {
+ .callback = sof_rt5682_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Volteer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Terrador"),
+ },
+ .driver_data = (void *)(SOF_RT5682_MCLK_EN |
+ SOF_RT5682_SSP_CODEC(0) |
+ SOF_SPEAKER_AMP_PRESENT |
+ SOF_MAX98373_SPEAKER_AMP_PRESENT |
+ SOF_RT5682_SSP_AMP(2) |
+ SOF_RT5682_NUM_HDMIDEV(4)),
+ },
{}
};
--
2.25.1
From: Valentin Vidic <[email protected]>
[ Upstream commit 3bd57b90554b4bb82dce638e0668ef9dc95d3e96 ]
Fixes gcc warning:
passing argument 1 of 'kfree' makes pointer from integer without a cast
Fixes: 3af5f0f5c74e ("net: korina: fix kfree of rx/tx descriptor array")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Valentin Vidic <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/korina.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index af441d699a57a..bf48f0ded9c7d 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -1113,7 +1113,7 @@ static int korina_probe(struct platform_device *pdev)
return rc;
probe_err_register:
- kfree(KSEG0ADDR(lp->td_ring));
+ kfree((struct dma_desc *)KSEG0ADDR(lp->td_ring));
probe_err_td_ring:
iounmap(lp->tx_dma_regs);
probe_err_dma_tx:
@@ -1133,7 +1133,7 @@ static int korina_remove(struct platform_device *pdev)
iounmap(lp->eth_regs);
iounmap(lp->rx_dma_regs);
iounmap(lp->tx_dma_regs);
- kfree(KSEG0ADDR(lp->td_ring));
+ kfree((struct dma_desc *)KSEG0ADDR(lp->td_ring));
unregister_netdev(bif->dev);
free_netdev(bif->dev);
--
2.25.1
From: Connor McAdams <[email protected]>
[ Upstream commit ed93f9750c6c2ed371347d0aac3dcd31cb9cf256 ]
Add AE-7 quirk data for setting of microphone. The AE-7 has no front
panel connector, so only rear-mic/line-in have new commands.
Signed-off-by: Connor McAdams <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_ca0132.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 6dfa864d3fe7b..62a9be5b827eb 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4675,6 +4675,15 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
tmp = FLOAT_THREE;
break;
+ case QUIRK_AE7:
+ ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
+ tmp = FLOAT_THREE;
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN2,
+ SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2,
+ SR_96_000);
+ dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO);
+ break;
default:
tmp = FLOAT_ONE;
break;
@@ -4720,6 +4729,14 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
case QUIRK_AE5:
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
break;
+ case QUIRK_AE7:
+ ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN2,
+ SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2,
+ SR_96_000);
+ dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO);
+ break;
default:
break;
}
@@ -4729,7 +4746,10 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
if (ca0132_quirk(spec) == QUIRK_R3DI)
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
- tmp = FLOAT_ZERO;
+ if (ca0132_quirk(spec) == QUIRK_AE7)
+ tmp = FLOAT_THREE;
+ else
+ tmp = FLOAT_ZERO;
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
switch (ca0132_quirk(spec)) {
--
2.25.1
From: Chunfeng Yun <[email protected]>
commit 5b35dd1a5a666329192a9616ec21098591259058 upstream.
Fix up the build error caused by undeclared usb_debug_root
Cc: stable <[email protected]>
Fixes: a66ada4f241c ("usb: gadget: bcm63xx_udc: create debugfs directory under usb root")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Chunfeng Yun <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/bcm63xx_udc.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -26,6 +26,7 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/timer.h>
+#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/workqueue.h>
From: Hamish Martin <[email protected]>
[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ]
Some integrated OHCI controller hubs do not expose all ports of the hub
to pins on the SoC. In some cases the unconnected ports generate
spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC
contains a nominally 3 port hub but only the first port is wired.
Default behaviour for ohci-platform driver is to use global over-current
protection mode (AKA "ganged"). This leads to the spurious over-current
events affecting all ports in the hub.
We now alter the default to use per-port over-current protection.
This patch results in the following configuration changes depending
on quirks:
- For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up
for ganged power switching and no over-current protection.
- For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching
remains at none, while over-current protection is now guaranteed to be
set to per-port rather than the previous behaviour where it was either
none or global over-current protection depending on the value at
function entry.
Suggested-by: Alan Stern <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Hamish Martin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ohci-hcd.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4de91653a2c7b..5eb62240c7f87 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -673,20 +673,24 @@ static int ohci_run (struct ohci_hcd *ohci)
/* handle root hub init quirks ... */
val = roothub_a (ohci);
- val &= ~(RH_A_PSM | RH_A_OCPM);
+ /* Configure for per-port over-current protection by default */
+ val &= ~RH_A_NOCP;
+ val |= RH_A_OCPM;
if (ohci->flags & OHCI_QUIRK_SUPERIO) {
- /* NSC 87560 and maybe others */
+ /* NSC 87560 and maybe others.
+ * Ganged power switching, no over-current protection.
+ */
val |= RH_A_NOCP;
- val &= ~(RH_A_POTPGT | RH_A_NPS);
- ohci_writel (ohci, val, &ohci->regs->roothub.a);
+ val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM);
} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
/* hub power always on; required for AMD-756 and some
- * Mac platforms. ganged overcurrent reporting, if any.
+ * Mac platforms.
*/
val |= RH_A_NPS;
- ohci_writel (ohci, val, &ohci->regs->roothub.a);
}
+ ohci_writel(ohci, val, &ohci->regs->roothub.a);
+
ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
&ohci->regs->roothub.b);
--
2.25.1
From: Keita Suzuki <[email protected]>
[ Upstream commit bc28369c6189009b66d9619dd9f09bd8c684bb98 ]
When mfd_add_devices() fail, pcr->slots should also be freed. However,
the current implementation does not free the member, leading to a memory
leak.
Fix this by adding a new goto label that frees pcr->slots.
Signed-off-by: Keita Suzuki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/cardreader/rtsx_pcr.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c
index 0d5928bc1b6d7..82246f7aec6fb 100644
--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -1536,12 +1536,14 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
ret = mfd_add_devices(&pcidev->dev, pcr->id, rtsx_pcr_cells,
ARRAY_SIZE(rtsx_pcr_cells), NULL, 0, NULL);
if (ret < 0)
- goto disable_irq;
+ goto free_slots;
schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
return 0;
+free_slots:
+ kfree(pcr->slots);
disable_irq:
free_irq(pcr->irq, (void *)pcr);
disable_msi:
--
2.25.1
From: Connor McAdams <[email protected]>
[ Upstream commit 620f08eea6d6961b789af3fa3ea86725c8c93ece ]
Add a new PCI subsystem ID for the SoundBlaster AE-7 card.
Signed-off-by: Connor McAdams <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_ca0132.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 62a9be5b827eb..a49c322bdbe9d 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -1065,6 +1065,7 @@ enum {
QUIRK_R3DI,
QUIRK_R3D,
QUIRK_AE5,
+ QUIRK_AE7,
};
#ifdef CONFIG_PCI
@@ -1184,6 +1185,7 @@ static const struct snd_pci_quirk ca0132_quirks[] = {
SND_PCI_QUIRK(0x1102, 0x0013, "Recon3D", QUIRK_R3D),
SND_PCI_QUIRK(0x1102, 0x0018, "Recon3D", QUIRK_R3D),
SND_PCI_QUIRK(0x1102, 0x0051, "Sound Blaster AE-5", QUIRK_AE5),
+ SND_PCI_QUIRK(0x1102, 0x0081, "Sound Blaster AE-7", QUIRK_AE7),
{}
};
--
2.25.1
From: Maciej Fijalkowski <[email protected]>
[ Upstream commit 7f6e4312e15a5c370e84eaa685879b6bdcc717e4 ]
Protect against potential stack overflow that might happen when bpf2bpf
calls get combined with tailcalls. Limit the caller's stack depth for
such case down to 256 so that the worst case scenario would result in 8k
stack size (32 which is tailcall limit * 256 = 8k).
Suggested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bpf_verifier.h | 1 +
kernel/bpf/verifier.c | 29 +++++++++++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index ca08db4ffb5f7..ce3f5231aa698 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -358,6 +358,7 @@ struct bpf_subprog_info {
u32 start; /* insn idx of function entry point */
u32 linfo_idx; /* The idx to the main_prog->aux->linfo */
u16 stack_depth; /* max. stack depth used by this function */
+ bool has_tail_call;
};
/* single container for all structs
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index c953dfbbaa6a9..12eb9e47d101c 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1470,6 +1470,10 @@ static int check_subprogs(struct bpf_verifier_env *env)
for (i = 0; i < insn_cnt; i++) {
u8 code = insn[i].code;
+ if (code == (BPF_JMP | BPF_CALL) &&
+ insn[i].imm == BPF_FUNC_tail_call &&
+ insn[i].src_reg != BPF_PSEUDO_CALL)
+ subprog[cur_subprog].has_tail_call = true;
if (BPF_CLASS(code) != BPF_JMP && BPF_CLASS(code) != BPF_JMP32)
goto next;
if (BPF_OP(code) == BPF_EXIT || BPF_OP(code) == BPF_CALL)
@@ -2951,6 +2955,31 @@ static int check_max_stack_depth(struct bpf_verifier_env *env)
int ret_prog[MAX_CALL_FRAMES];
process_func:
+ /* protect against potential stack overflow that might happen when
+ * bpf2bpf calls get combined with tailcalls. Limit the caller's stack
+ * depth for such case down to 256 so that the worst case scenario
+ * would result in 8k stack size (32 which is tailcall limit * 256 =
+ * 8k).
+ *
+ * To get the idea what might happen, see an example:
+ * func1 -> sub rsp, 128
+ * subfunc1 -> sub rsp, 256
+ * tailcall1 -> add rsp, 256
+ * func2 -> sub rsp, 192 (total stack size = 128 + 192 = 320)
+ * subfunc2 -> sub rsp, 64
+ * subfunc22 -> sub rsp, 128
+ * tailcall2 -> add rsp, 128
+ * func3 -> sub rsp, 32 (total stack size 128 + 192 + 64 + 32 = 416)
+ *
+ * tailcall will unwind the current stack frame but it will not get rid
+ * of caller's stack as shown on the example above.
+ */
+ if (idx && subprog[idx].has_tail_call && depth >= 256) {
+ verbose(env,
+ "tail_calls are not allowed when call stack of previous frames is %d bytes. Too large\n",
+ depth);
+ return -EACCES;
+ }
/* round up to 32-bytes, since this is granularity
* of interpreter stack size
*/
--
2.25.1
From: Qian Cai <[email protected]>
[ Upstream commit a805c111650cdba6ee880f528abdd03c1af82089 ]
It is trivial to trigger a WARN_ON_ONCE(1) in iomap_dio_actor() by
unprivileged users which would taint the kernel, or worse - panic if
panic_on_warn or panic_on_taint is set. Hence, just convert it to
pr_warn_ratelimited() to let users know their workloads are racing.
Thank Dave Chinner for the initial analysis of the racing reproducers.
Signed-off-by: Qian Cai <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/iomap/direct-io.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
index ec7b78e6fecaf..28d656b15300b 100644
--- a/fs/iomap/direct-io.c
+++ b/fs/iomap/direct-io.c
@@ -387,6 +387,16 @@ iomap_dio_actor(struct inode *inode, loff_t pos, loff_t length,
return iomap_dio_bio_actor(inode, pos, length, dio, iomap);
case IOMAP_INLINE:
return iomap_dio_inline_actor(inode, pos, length, dio, iomap);
+ case IOMAP_DELALLOC:
+ /*
+ * DIO is not serialised against mmap() access at all, and so
+ * if the page_mkwrite occurs between the writeback and the
+ * iomap_apply() call in the DIO path, then it will see the
+ * DELALLOC block that the page-mkwrite allocated.
+ */
+ pr_warn_ratelimited("Direct I/O collision with buffered writes! File: %pD4 Comm: %.20s\n",
+ dio->iocb->ki_filp, current->comm);
+ return -EIO;
default:
WARN_ON_ONCE(1);
return -EIO;
--
2.25.1
From: Neil Armstrong <[email protected]>
[ Upstream commit afcd0c7d3d4c22afc8befcfc906db6ce3058d3ee ]
This adds the required GPU quirks, including the quirk in the PWR
registers at the GPU reset time and the IOMMU quirk for shareability
issues observed on G52 in Amlogic G12B SoCs.
Signed-off-by: Neil Armstrong <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Reviewed-by: Alyssa Rosenzweig <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panfrost/panfrost_drv.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index 882fecc33fdb1..6e11a73e81aa3 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -667,7 +667,18 @@ static const struct panfrost_compatible default_data = {
.pm_domain_names = NULL,
};
+static const struct panfrost_compatible amlogic_data = {
+ .num_supplies = ARRAY_SIZE(default_supplies),
+ .supply_names = default_supplies,
+ .vendor_quirk = panfrost_gpu_amlogic_quirk,
+};
+
static const struct of_device_id dt_match[] = {
+ /* Set first to probe before the generic compatibles */
+ { .compatible = "amlogic,meson-gxm-mali",
+ .data = &amlogic_data, },
+ { .compatible = "amlogic,meson-g12a-mali",
+ .data = &amlogic_data, },
{ .compatible = "arm,mali-t604", .data = &default_data, },
{ .compatible = "arm,mali-t624", .data = &default_data, },
{ .compatible = "arm,mali-t628", .data = &default_data, },
--
2.25.1
From: Yu Chen <[email protected]>
[ Upstream commit f580170f135af14e287560d94045624d4242d712 ]
SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
of Hisilicon Kirin Soc when dwc3 core act as host.
[mchehab: dropped a dev_dbg() as only traces are now allowwed on this driver]
Signed-off-by: Yu Chen <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/core.c | 25 +++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 7 +++++++
2 files changed, 32 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 7c5a18f9f66c8..928a85b0d1cdd 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -119,6 +119,7 @@ static void __dwc3_set_mode(struct work_struct *work)
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
+ u32 reg;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
@@ -172,6 +173,11 @@ static void __dwc3_set_mode(struct work_struct *work)
otg_set_vbus(dwc->usb2_phy->otg, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ if (dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1350,6 +1356,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
+ dwc->dis_split_quirk = device_property_read_bool(dev,
+ "snps,dis-split-quirk");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1867,10 +1876,26 @@ static int dwc3_resume(struct device *dev)
return 0;
}
+
+static void dwc3_complete(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 reg;
+
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+ dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
+}
+#else
+#define dwc3_complete NULL
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+ .complete = dwc3_complete,
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 013f42a2b5dcc..af5533b097133 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -138,6 +138,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GUCTL3 0xc60c
#define DWC3_GFLADJ 0xc630
/* Device Registers */
@@ -380,6 +381,9 @@
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -1052,6 +1056,7 @@ struct dwc3_scratchpad_array {
* 2 - No de-emphasis
* 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
*/
@@ -1245,6 +1250,8 @@ struct dwc3 {
unsigned dis_metastability_quirk:1;
+ unsigned dis_split_quirk:1;
+
u16 imod_interval;
};
--
2.25.1
From: Sherry Sun <[email protected]>
[ Upstream commit cc1a2679865a94b83804822996eed010a50a7c1d ]
Since struct _mic_vring_info and vring are allocated together and follow
vring, if the vring_size() is not four bytes aligned, which will cause
the start address of struct _mic_vring_info is not four byte aligned.
For example, when vring entries is 128, the vring_size() will be 5126
bytes. The _mic_vring_info struct layout in ddr looks like:
0x90002400: 00000000 00390000 EE010000 0000C0FF
Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member.
When EP use ioread32(magic) to reads the magic in RC's share memory, it
will cause kernel panic on ARM64 platform due to the cross-byte io read.
Here read magic in user space use le32toh(vr0->info->magic) will meet
the same issue.
So add round_up(x,4) for vring_size, then the struct _mic_vring_info
will store in this way:
0x90002400: 00000000 00000000 00000039 C0FFEE01
Which will avoid kernel panic when read magic in struct _mic_vring_info.
Signed-off-by: Sherry Sun <[email protected]>
Signed-off-by: Joakim Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/mic/vop/vop_main.c | 2 +-
drivers/misc/mic/vop/vop_vringh.c | 4 ++--
samples/mic/mpssd/mpssd.c | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/misc/mic/vop/vop_main.c b/drivers/misc/mic/vop/vop_main.c
index 85942f6717c57..8aadc6055df17 100644
--- a/drivers/misc/mic/vop/vop_main.c
+++ b/drivers/misc/mic/vop/vop_main.c
@@ -320,7 +320,7 @@ static struct virtqueue *vop_find_vq(struct virtio_device *dev,
/* First assign the vring's allocated in host memory */
vqconfig = _vop_vq_config(vdev->desc) + index;
memcpy_fromio(&config, vqconfig, sizeof(config));
- _vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN);
+ _vr_size = round_up(vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN), 4);
vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info));
va = vpdev->hw_ops->remap(vpdev, le64_to_cpu(config.address), vr_size);
if (!va)
diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c
index d069947b09345..7014ffe88632e 100644
--- a/drivers/misc/mic/vop/vop_vringh.c
+++ b/drivers/misc/mic/vop/vop_vringh.c
@@ -296,7 +296,7 @@ static int vop_virtio_add_device(struct vop_vdev *vdev,
num = le16_to_cpu(vqconfig[i].num);
mutex_init(&vvr->vr_mutex);
- vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) +
+ vr_size = PAGE_ALIGN(round_up(vring_size(num, MIC_VIRTIO_RING_ALIGN), 4) +
sizeof(struct _mic_vring_info));
vr->va = (void *)
__get_free_pages(GFP_KERNEL | __GFP_ZERO,
@@ -308,7 +308,7 @@ static int vop_virtio_add_device(struct vop_vdev *vdev,
goto err;
}
vr->len = vr_size;
- vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN);
+ vr->info = vr->va + round_up(vring_size(num, MIC_VIRTIO_RING_ALIGN), 4);
vr->info->magic = cpu_to_le32(MIC_MAGIC + vdev->virtio_id + i);
vr_addr = dma_map_single(&vpdev->dev, vr->va, vr_size,
DMA_BIDIRECTIONAL);
diff --git a/samples/mic/mpssd/mpssd.c b/samples/mic/mpssd/mpssd.c
index a11bf6c5b53b4..cd3f16a6f5caf 100644
--- a/samples/mic/mpssd/mpssd.c
+++ b/samples/mic/mpssd/mpssd.c
@@ -403,9 +403,9 @@ mic_virtio_copy(struct mic_info *mic, int fd,
static inline unsigned _vring_size(unsigned int num, unsigned long align)
{
- return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+ return _ALIGN_UP(((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+ align - 1) & ~(align - 1))
- + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+ + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num, 4);
}
/*
--
2.25.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit 428805c0c5e76ef643b1fbc893edfb636b3d8aef ]
get_gendisk grabs a reference on the disk and file operation, so this
code will leak both of them while having absolutely no use for the
gendisk itself.
This effectively reverts commit 2df83fa4bce421f ("PM / Hibernate: Use
get_gendisk to verify partition if resume_file is integer format")
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/power/hibernate.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 02ec716a49271..0e60e10ed66a3 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -851,17 +851,6 @@ static int software_resume(void)
/* Check if the device is there */
swsusp_resume_device = name_to_dev_t(resume_file);
-
- /*
- * name_to_dev_t is ineffective to verify parition if resume_file is in
- * integer format. (e.g. major:minor)
- */
- if (isdigit(resume_file[0]) && resume_wait) {
- int partno;
- while (!get_gendisk(swsusp_resume_device, &partno))
- msleep(10);
- }
-
if (!swsusp_resume_device) {
/*
* Some device discovery might still be in progress; we need
--
2.25.1
From: Hangbin Liu <[email protected]>
[ Upstream commit a0f2b7acb4b1d29127ff99c714233b973afd1411 ]
Previously we forgot to close the map fd if bpf_map_update_elem()
failed during map slot init, which will leak map fd.
Let's move map slot initialization to new function init_map_slots() to
simplify the code. And close the map fd if init slot failed.
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/libbpf.c | 55 ++++++++++++++++++++++++++----------------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index e4d304247c1ba..3e71c2f69afe8 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3677,6 +3677,36 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map)
return 0;
}
+static int init_map_slots(struct bpf_map *map)
+{
+ const struct bpf_map *targ_map;
+ unsigned int i;
+ int fd, err;
+
+ for (i = 0; i < map->init_slots_sz; i++) {
+ if (!map->init_slots[i])
+ continue;
+
+ targ_map = map->init_slots[i];
+ fd = bpf_map__fd(targ_map);
+ err = bpf_map_update_elem(map->fd, &i, &fd, 0);
+ if (err) {
+ err = -errno;
+ pr_warn("map '%s': failed to initialize slot [%d] to map '%s' fd=%d: %d\n",
+ map->name, i, targ_map->name,
+ fd, err);
+ return err;
+ }
+ pr_debug("map '%s': slot [%d] set to map '%s' fd=%d\n",
+ map->name, i, targ_map->name, fd);
+ }
+
+ zfree(&map->init_slots);
+ map->init_slots_sz = 0;
+
+ return 0;
+}
+
static int
bpf_object__create_maps(struct bpf_object *obj)
{
@@ -3719,28 +3749,11 @@ bpf_object__create_maps(struct bpf_object *obj)
}
if (map->init_slots_sz) {
- for (j = 0; j < map->init_slots_sz; j++) {
- const struct bpf_map *targ_map;
- int fd;
-
- if (!map->init_slots[j])
- continue;
-
- targ_map = map->init_slots[j];
- fd = bpf_map__fd(targ_map);
- err = bpf_map_update_elem(map->fd, &j, &fd, 0);
- if (err) {
- err = -errno;
- pr_warn("map '%s': failed to initialize slot [%d] to map '%s' fd=%d: %d\n",
- map->name, j, targ_map->name,
- fd, err);
- goto err_out;
- }
- pr_debug("map '%s': slot [%d] set to map '%s' fd=%d\n",
- map->name, j, targ_map->name, fd);
+ err = init_map_slots(map);
+ if (err < 0) {
+ zclose(map->fd);
+ goto err_out;
}
- zfree(&map->init_slots);
- map->init_slots_sz = 0;
}
if (map->pin_path && !map->pinned) {
--
2.25.1
From: Cong Wang <[email protected]>
[ Upstream commit fdafed459998e2be0e877e6189b24cb7a0183224 ]
GRE tunnel has its own header_ops, ipgre_header_ops, and sets it
conditionally. When it is set, it assumes the outer IP header is
already created before ipgre_xmit().
This is not true when we send packets through a raw packet socket,
where L2 headers are supposed to be constructed by user. Packet
socket calls dev_validate_header() to validate the header. But
GRE tunnel does not set dev->hard_header_len, so that check can
be simply bypassed, therefore uninit memory could be passed down
to ipgre_xmit(). Similar for dev->needed_headroom.
dev->hard_header_len is supposed to be the length of the header
created by dev->header_ops->create(), so it should be used whenever
header_ops is set, and dev->needed_headroom should be used when it
is not set.
Reported-and-tested-by: [email protected]
Cc: William Tu <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Acked-by: Xie He <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/ip_gre.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 4e31f23e4117e..e70291748889b 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -625,9 +625,7 @@ static netdev_tx_t ipgre_xmit(struct sk_buff *skb,
}
if (dev->header_ops) {
- /* Need space for new headers */
- if (skb_cow_head(skb, dev->needed_headroom -
- (tunnel->hlen + sizeof(struct iphdr))))
+ if (skb_cow_head(skb, 0))
goto free_skb;
tnl_params = (const struct iphdr *)skb->data;
@@ -748,7 +746,11 @@ static void ipgre_link_update(struct net_device *dev, bool set_mtu)
len = tunnel->tun_hlen - len;
tunnel->hlen = tunnel->hlen + len;
- dev->needed_headroom = dev->needed_headroom + len;
+ if (dev->header_ops)
+ dev->hard_header_len += len;
+ else
+ dev->needed_headroom += len;
+
if (set_mtu)
dev->mtu = max_t(int, dev->mtu - len, 68);
@@ -944,6 +946,7 @@ static void __gre_tunnel_init(struct net_device *dev)
tunnel->parms.iph.protocol = IPPROTO_GRE;
tunnel->hlen = tunnel->tun_hlen + tunnel->encap_hlen;
+ dev->needed_headroom = tunnel->hlen + sizeof(tunnel->parms.iph);
dev->features |= GRE_FEATURES;
dev->hw_features |= GRE_FEATURES;
@@ -987,10 +990,14 @@ static int ipgre_tunnel_init(struct net_device *dev)
return -EINVAL;
dev->flags = IFF_BROADCAST;
dev->header_ops = &ipgre_header_ops;
+ dev->hard_header_len = tunnel->hlen + sizeof(*iph);
+ dev->needed_headroom = 0;
}
#endif
} else if (!tunnel->collect_md) {
dev->header_ops = &ipgre_header_ops;
+ dev->hard_header_len = tunnel->hlen + sizeof(*iph);
+ dev->needed_headroom = 0;
}
return ip_tunnel_init(dev);
--
2.25.1
From: Roman Bolshakov <[email protected]>
[ Upstream commit 7010645ba7256992818b518163f46bd4cdf8002a ]
trace-cmd report doesn't show events from target subsystem because
scsi_command_size() leaks through event format string:
[target:target_sequencer_start] function scsi_command_size not defined
[target:target_cmd_complete] function scsi_command_size not defined
Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't
help because an expression is used inside TP_printk(). trace-cmd event
parser doesn't understand minus sign inside [ ]:
Error: expected ']' but read '-'
Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated
field for CONTROL byte.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Roman Bolshakov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/scsi/scsi_common.h | 7 +++++++
include/trace/events/target.h | 12 ++++++------
2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/include/scsi/scsi_common.h b/include/scsi/scsi_common.h
index 731ac09ed2313..5b567b43e1b16 100644
--- a/include/scsi/scsi_common.h
+++ b/include/scsi/scsi_common.h
@@ -25,6 +25,13 @@ scsi_command_size(const unsigned char *cmnd)
scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
}
+static inline unsigned char
+scsi_command_control(const unsigned char *cmnd)
+{
+ return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+ cmnd[1] : cmnd[COMMAND_SIZE(cmnd[0]) - 1];
+}
+
/* Returns a human-readable name for the device */
extern const char *scsi_device_type(unsigned type);
diff --git a/include/trace/events/target.h b/include/trace/events/target.h
index 77408edd29d2a..67fad2677ed55 100644
--- a/include/trace/events/target.h
+++ b/include/trace/events/target.h
@@ -141,6 +141,7 @@ TRACE_EVENT(target_sequencer_start,
__field( unsigned int, opcode )
__field( unsigned int, data_length )
__field( unsigned int, task_attribute )
+ __field( unsigned char, control )
__array( unsigned char, cdb, TCM_MAX_COMMAND_SIZE )
__string( initiator, cmd->se_sess->se_node_acl->initiatorname )
),
@@ -151,6 +152,7 @@ TRACE_EVENT(target_sequencer_start,
__entry->opcode = cmd->t_task_cdb[0];
__entry->data_length = cmd->data_length;
__entry->task_attribute = cmd->sam_task_attr;
+ __entry->control = scsi_command_control(cmd->t_task_cdb);
memcpy(__entry->cdb, cmd->t_task_cdb, TCM_MAX_COMMAND_SIZE);
__assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname);
),
@@ -160,9 +162,7 @@ TRACE_EVENT(target_sequencer_start,
__entry->tag, show_opcode_name(__entry->opcode),
__entry->data_length, __print_hex(__entry->cdb, 16),
show_task_attribute_name(__entry->task_attribute),
- scsi_command_size(__entry->cdb) <= 16 ?
- __entry->cdb[scsi_command_size(__entry->cdb) - 1] :
- __entry->cdb[1]
+ __entry->control
)
);
@@ -178,6 +178,7 @@ TRACE_EVENT(target_cmd_complete,
__field( unsigned int, opcode )
__field( unsigned int, data_length )
__field( unsigned int, task_attribute )
+ __field( unsigned char, control )
__field( unsigned char, scsi_status )
__field( unsigned char, sense_length )
__array( unsigned char, cdb, TCM_MAX_COMMAND_SIZE )
@@ -191,6 +192,7 @@ TRACE_EVENT(target_cmd_complete,
__entry->opcode = cmd->t_task_cdb[0];
__entry->data_length = cmd->data_length;
__entry->task_attribute = cmd->sam_task_attr;
+ __entry->control = scsi_command_control(cmd->t_task_cdb);
__entry->scsi_status = cmd->scsi_status;
__entry->sense_length = cmd->scsi_status == SAM_STAT_CHECK_CONDITION ?
min(18, ((u8 *) cmd->sense_buffer)[SPC_ADD_SENSE_LEN_OFFSET] + 8) : 0;
@@ -208,9 +210,7 @@ TRACE_EVENT(target_cmd_complete,
show_opcode_name(__entry->opcode),
__entry->data_length, __print_hex(__entry->cdb, 16),
show_task_attribute_name(__entry->task_attribute),
- scsi_command_size(__entry->cdb) <= 16 ?
- __entry->cdb[scsi_command_size(__entry->cdb) - 1] :
- __entry->cdb[1]
+ __entry->control
)
);
--
2.25.1
From: Alan Maguire <[email protected]>
[ Upstream commit eb58bbf2e5c7917aa30bf8818761f26bbeeb2290 ]
bpf iter size increase to PAGE_SIZE << 3 means overflow tests assuming
page size need to be bumped also.
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/bpf_iter.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_iter.c b/tools/testing/selftests/bpf/prog_tests/bpf_iter.c
index 87c29dde1cf96..669f195de2fa0 100644
--- a/tools/testing/selftests/bpf/prog_tests/bpf_iter.c
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_iter.c
@@ -249,7 +249,7 @@ static void test_overflow(bool test_e2big_overflow, bool ret1)
struct bpf_map_info map_info = {};
struct bpf_iter_test_kern4 *skel;
struct bpf_link *link;
- __u32 page_size;
+ __u32 iter_size;
char *buf;
skel = bpf_iter_test_kern4__open();
@@ -271,19 +271,19 @@ static void test_overflow(bool test_e2big_overflow, bool ret1)
"map_creation failed: %s\n", strerror(errno)))
goto free_map1;
- /* bpf_seq_printf kernel buffer is one page, so one map
+ /* bpf_seq_printf kernel buffer is 8 pages, so one map
* bpf_seq_write will mostly fill it, and the other map
* will partially fill and then trigger overflow and need
* bpf_seq_read restart.
*/
- page_size = sysconf(_SC_PAGE_SIZE);
+ iter_size = sysconf(_SC_PAGE_SIZE) << 3;
if (test_e2big_overflow) {
- skel->rodata->print_len = (page_size + 8) / 8;
- expected_read_len = 2 * (page_size + 8);
+ skel->rodata->print_len = (iter_size + 8) / 8;
+ expected_read_len = 2 * (iter_size + 8);
} else if (!ret1) {
- skel->rodata->print_len = (page_size - 8) / 8;
- expected_read_len = 2 * (page_size - 8);
+ skel->rodata->print_len = (iter_size - 8) / 8;
+ expected_read_len = 2 * (iter_size - 8);
} else {
skel->rodata->print_len = 1;
expected_read_len = 2 * 8;
--
2.25.1
From: Jan Kara <[email protected]>
[ Upstream commit 044e2e26f214e5ab26af85faffd8d1e4ec066931 ]
When we fail to read inode, some data accessed in udf_evict_inode() may
be uninitialized. Move the accesses to !is_bad_inode() branch.
Reported-by: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/udf/inode.c | 25 ++++++++++++++-----------
1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index adaba8e8b326e..566118417e562 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -139,21 +139,24 @@ void udf_evict_inode(struct inode *inode)
struct udf_inode_info *iinfo = UDF_I(inode);
int want_delete = 0;
- if (!inode->i_nlink && !is_bad_inode(inode)) {
- want_delete = 1;
- udf_setsize(inode, 0);
- udf_update_inode(inode, IS_SYNC(inode));
+ if (!is_bad_inode(inode)) {
+ if (!inode->i_nlink) {
+ want_delete = 1;
+ udf_setsize(inode, 0);
+ udf_update_inode(inode, IS_SYNC(inode));
+ }
+ if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
+ inode->i_size != iinfo->i_lenExtents) {
+ udf_warn(inode->i_sb,
+ "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
+ inode->i_ino, inode->i_mode,
+ (unsigned long long)inode->i_size,
+ (unsigned long long)iinfo->i_lenExtents);
+ }
}
truncate_inode_pages_final(&inode->i_data);
invalidate_inode_buffers(inode);
clear_inode(inode);
- if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
- inode->i_size != iinfo->i_lenExtents) {
- udf_warn(inode->i_sb, "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
- inode->i_ino, inode->i_mode,
- (unsigned long long)inode->i_size,
- (unsigned long long)iinfo->i_lenExtents);
- }
kfree(iinfo->i_ext.i_data);
iinfo->i_ext.i_data = NULL;
udf_clear_extent_cache(inode);
--
2.25.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 15a36aae1ec1c1f17149b6113b92631791830740 ]
As reported by smatch:
drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type?
On a 64-bits Kernel, the shift might be bigger than 32 bits.
In real, this should never happen, but let's shut up the warning.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7134/saa7134-tvaudio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/saa7134/saa7134-tvaudio.c b/drivers/media/pci/saa7134/saa7134-tvaudio.c
index 79e1afb710758..5cc4ef21f9d37 100644
--- a/drivers/media/pci/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/pci/saa7134/saa7134-tvaudio.c
@@ -683,7 +683,8 @@ int saa_dsp_writel(struct saa7134_dev *dev, int reg, u32 value)
{
int err;
- audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n", reg << 2, value);
+ audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n",
+ (reg << 2) & 0xffffffff, value);
err = saa_dsp_wait_bit(dev,SAA7135_DSP_RWSTATE_WRR);
if (err < 0)
return err;
--
2.25.1
From: Mikael Wikström <[email protected]>
[ Upstream commit 140958da9ab53a7df9e9ccc7678ea64655279ac1 ]
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen3.
It is probably also needed for the Lenovo X1 Tablet Gen2 with PID 0x60a3
Signed-off-by: Mikael Wikström <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-multitouch.c | 6 ++++++
2 files changed, 7 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b49ec7dde6457..0ca8906a6f839 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -726,6 +726,7 @@
#define USB_DEVICE_ID_LENOVO_SCROLLPOINT_OPTICAL 0x6049
#define USB_DEVICE_ID_LENOVO_TPPRODOCK 0x6067
#define USB_DEVICE_ID_LENOVO_X1_COVER 0x6085
+#define USB_DEVICE_ID_LENOVO_X1_TAB3 0x60b5
#define USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_608D 0x608d
#define USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_6019 0x6019
#define USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_602E 0x602e
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index e3152155c4b85..99f041afd5c0c 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1973,6 +1973,12 @@ static const struct hid_device_id mt_devices[] = {
HID_DEVICE(BUS_I2C, HID_GROUP_GENERIC,
USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_7010) },
+ /* Lenovo X1 TAB Gen 3 */
+ { .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT,
+ HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH_WIN_8,
+ USB_VENDOR_ID_LENOVO,
+ USB_DEVICE_ID_LENOVO_X1_TAB3) },
+
/* MosArt panels */
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
MT_USB_DEVICE(USB_VENDOR_ID_ASUS,
--
2.25.1
From: Pali Rohár <[email protected]>
[ Upstream commit 8ebe2607965d3e2dc02029e8c7dd35fbe508ffd0 ]
Before parsing CISTPL_VERS_1 structure check that its size is at least two
bytes to prevent buffer overflow.
Signed-off-by: Pali Rohár <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/core/sdio_cis.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index e0655278c5c32..3efaa9534a777 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -26,6 +26,9 @@ static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
unsigned i, nr_strings;
char **buffer, *string;
+ if (size < 2)
+ return 0;
+
/* Find all null-terminated (including zero length) strings in
the TPLLV1_INFO field. Trailing garbage is ignored. */
buf += 2;
--
2.25.1
From: Brad Bishop <[email protected]>
[ Upstream commit 0b546bbe9474ff23e6843916ad6d567f703b2396 ]
Use a clock divider tuned to a 200MHz FSI bus frequency (the maximum). Use
of the previous divider at 200MHz results in corrupt data from endpoint
devices. Ideally the clock divider would be calculated from the FSI clock,
but that would require some significant work on the FSI driver. With FSI
frequencies slower than 200MHz, the SPI clock will simply run slower, but
safely.
Signed-off-by: Brad Bishop <[email protected]>
Signed-off-by: Eddie James <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c
index ef5e0826a53c3..a702e9d7d68c0 100644
--- a/drivers/spi/spi-fsi.c
+++ b/drivers/spi/spi-fsi.c
@@ -403,7 +403,7 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx)
u64 status = 0ULL;
u64 wanted_clock_cfg = SPI_FSI_CLOCK_CFG_ECC_DISABLE |
SPI_FSI_CLOCK_CFG_SCK_NO_DEL |
- FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 4);
+ FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 19);
end = jiffies + msecs_to_jiffies(SPI_FSI_INIT_TIMEOUT_MS);
do {
--
2.25.1
From: Borislav Petkov <[email protected]>
[ Upstream commit fd258dc4442c5c1c069c6b5b42bfe7d10cddda95 ]
The patrol scrubber in Skylake and Cascade Lake systems can be configured
to report uncorrected errors using a special signature in the machine
check bank and to signal using CMCI instead of machine check.
Update the severity calculation mechanism to allow specifying the model,
minimum stepping and range of machine check bank numbers.
Add a new rule to detect the special signature (on model 0x55, stepping
>=4 in any of the memory controller banks).
[ bp: Rewrite it.
aegl: Productize it. ]
Suggested-by: Youquan Song <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Co-developed-by: Tony Luck <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/severity.c | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/severity.c b/arch/x86/kernel/cpu/mce/severity.c
index e1da619add192..567ce09a02868 100644
--- a/arch/x86/kernel/cpu/mce/severity.c
+++ b/arch/x86/kernel/cpu/mce/severity.c
@@ -9,9 +9,11 @@
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/debugfs.h>
-#include <asm/mce.h>
#include <linux/uaccess.h>
+#include <asm/mce.h>
+#include <asm/intel-family.h>
+
#include "internal.h"
/*
@@ -40,9 +42,14 @@ static struct severity {
unsigned char context;
unsigned char excp;
unsigned char covered;
+ unsigned char cpu_model;
+ unsigned char cpu_minstepping;
+ unsigned char bank_lo, bank_hi;
char *msg;
} severities[] = {
#define MCESEV(s, m, c...) { .sev = MCE_ ## s ## _SEVERITY, .msg = m, ## c }
+#define BANK_RANGE(l, h) .bank_lo = l, .bank_hi = h
+#define MODEL_STEPPING(m, s) .cpu_model = m, .cpu_minstepping = s
#define KERNEL .context = IN_KERNEL
#define USER .context = IN_USER
#define KERNEL_RECOV .context = IN_KERNEL_RECOV
@@ -97,7 +104,6 @@ static struct severity {
KEEP, "Corrected error",
NOSER, BITCLR(MCI_STATUS_UC)
),
-
/*
* known AO MCACODs reported via MCE or CMC:
*
@@ -113,6 +119,18 @@ static struct severity {
AO, "Action optional: last level cache writeback error",
SER, MASK(MCI_UC_AR|MCACOD, MCI_STATUS_UC|MCACOD_L3WB)
),
+ /*
+ * Quirk for Skylake/Cascade Lake. Patrol scrubber may be configured
+ * to report uncorrected errors using CMCI with a special signature.
+ * UC=0, MSCOD=0x0010, MCACOD=binary(000X 0000 1100 XXXX) reported
+ * in one of the memory controller banks.
+ * Set severity to "AO" for same action as normal patrol scrub error.
+ */
+ MCESEV(
+ AO, "Uncorrected Patrol Scrub Error",
+ SER, MASK(MCI_STATUS_UC|MCI_ADDR|0xffffeff0, MCI_ADDR|0x001000c0),
+ MODEL_STEPPING(INTEL_FAM6_SKYLAKE_X, 4), BANK_RANGE(13, 18)
+ ),
/* ignore OVER for UCNA */
MCESEV(
@@ -324,6 +342,12 @@ static int mce_severity_intel(struct mce *m, int tolerant, char **msg, bool is_e
continue;
if (s->excp && excp != s->excp)
continue;
+ if (s->cpu_model && boot_cpu_data.x86_model != s->cpu_model)
+ continue;
+ if (s->cpu_minstepping && boot_cpu_data.x86_stepping < s->cpu_minstepping)
+ continue;
+ if (s->bank_lo && (m->bank < s->bank_lo || m->bank > s->bank_hi))
+ continue;
if (msg)
*msg = s->msg;
s->covered = 1;
--
2.25.1
From: Arvind Sankar <[email protected]>
[ Upstream commit aa5cacdc29d76a005cbbee018a47faa6e724dd2d ]
The CRn accessor functions use __force_order as a dummy operand to
prevent the compiler from reordering CRn reads/writes with respect to
each other.
The fact that the asm is volatile should be enough to prevent this:
volatile asm statements should be executed in program order. However GCC
4.9.x and 5.x have a bug that might result in reordering. This was fixed
in 8.1, 7.3 and 6.5. Versions prior to these, including 5.x and 4.9.x,
may reorder volatile asm statements with respect to each other.
There are some issues with __force_order as implemented:
- It is used only as an input operand for the write functions, and hence
doesn't do anything additional to prevent reordering writes.
- It allows memory accesses to be cached/reordered across write
functions, but CRn writes affect the semantics of memory accesses, so
this could be dangerous.
- __force_order is not actually defined in the kernel proper, but the
LLVM toolchain can in some cases require a definition: LLVM (as well
as GCC 4.9) requires it for PIE code, which is why the compressed
kernel has a definition, but also the clang integrated assembler may
consider the address of __force_order to be significant, resulting in
a reference that requires a definition.
Fix this by:
- Using a memory clobber for the write functions to additionally prevent
caching/reordering memory accesses across CRn writes.
- Using a dummy input operand with an arbitrary constant address for the
read functions, instead of a global variable. This will prevent reads
from being reordered across writes, while allowing memory loads to be
cached/reordered across CRn reads, which should be safe.
Signed-off-by: Arvind Sankar <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82602
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/boot/compressed/pgtable_64.c | 9 ---------
arch/x86/include/asm/special_insns.h | 28 ++++++++++++++-------------
arch/x86/kernel/cpu/common.c | 4 ++--
3 files changed, 17 insertions(+), 24 deletions(-)
diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index c8862696a47b9..7d0394f4ebf97 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -5,15 +5,6 @@
#include "pgtable.h"
#include "../string.h"
-/*
- * __force_order is used by special_insns.h asm code to force instruction
- * serialization.
- *
- * It is not referenced from the code, but GCC < 5 with -fPIE would fail
- * due to an undefined symbol. Define it to make these ancient GCCs work.
- */
-unsigned long __force_order;
-
#define BIOS_START_MIN 0x20000U /* 128K, less than this is insane */
#define BIOS_START_MAX 0x9f000U /* 640K, absolute maximum */
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index eb8e781c43539..b8f7c9659ef6b 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -11,45 +11,47 @@
#include <linux/jump_label.h>
/*
- * Volatile isn't enough to prevent the compiler from reordering the
- * read/write functions for the control registers and messing everything up.
- * A memory clobber would solve the problem, but would prevent reordering of
- * all loads stores around it, which can hurt performance. Solution is to
- * use a variable and mimic reads and writes to it to enforce serialization
+ * The compiler should not reorder volatile asm statements with respect to each
+ * other: they should execute in program order. However GCC 4.9.x and 5.x have
+ * a bug (which was fixed in 8.1, 7.3 and 6.5) where they might reorder
+ * volatile asm. The write functions are not affected since they have memory
+ * clobbers preventing reordering. To prevent reads from being reordered with
+ * respect to writes, use a dummy memory operand.
*/
-extern unsigned long __force_order;
+
+#define __FORCE_ORDER "m"(*(unsigned int *)0x1000UL)
void native_write_cr0(unsigned long val);
static inline unsigned long native_read_cr0(void)
{
unsigned long val;
- asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+ asm volatile("mov %%cr0,%0\n\t" : "=r" (val) : __FORCE_ORDER);
return val;
}
static __always_inline unsigned long native_read_cr2(void)
{
unsigned long val;
- asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+ asm volatile("mov %%cr2,%0\n\t" : "=r" (val) : __FORCE_ORDER);
return val;
}
static __always_inline void native_write_cr2(unsigned long val)
{
- asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
+ asm volatile("mov %0,%%cr2": : "r" (val) : "memory");
}
static inline unsigned long __native_read_cr3(void)
{
unsigned long val;
- asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+ asm volatile("mov %%cr3,%0\n\t" : "=r" (val) : __FORCE_ORDER);
return val;
}
static inline void native_write_cr3(unsigned long val)
{
- asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
+ asm volatile("mov %0,%%cr3": : "r" (val) : "memory");
}
static inline unsigned long native_read_cr4(void)
@@ -64,10 +66,10 @@ static inline unsigned long native_read_cr4(void)
asm volatile("1: mov %%cr4, %0\n"
"2:\n"
_ASM_EXTABLE(1b, 2b)
- : "=r" (val), "=m" (__force_order) : "0" (0));
+ : "=r" (val) : "0" (0), __FORCE_ORDER);
#else
/* CR4 always exists on x86_64. */
- asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+ asm volatile("mov %%cr4,%0\n\t" : "=r" (val) : __FORCE_ORDER);
#endif
return val;
}
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 95c090a45b4b4..d8ef789e00c15 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -358,7 +358,7 @@ void native_write_cr0(unsigned long val)
unsigned long bits_missing = 0;
set_register:
- asm volatile("mov %0,%%cr0": "+r" (val), "+m" (__force_order));
+ asm volatile("mov %0,%%cr0": "+r" (val) : : "memory");
if (static_branch_likely(&cr_pinning)) {
if (unlikely((val & X86_CR0_WP) != X86_CR0_WP)) {
@@ -377,7 +377,7 @@ void native_write_cr4(unsigned long val)
unsigned long bits_changed = 0;
set_register:
- asm volatile("mov %0,%%cr4": "+r" (val), "+m" (cr4_pinned_bits));
+ asm volatile("mov %0,%%cr4": "+r" (val) : : "memory");
if (static_branch_likely(&cr_pinning)) {
if (unlikely((val & cr4_pinned_mask) != cr4_pinned_bits)) {
--
2.25.1
From: Biju Das <[email protected]>
[ Upstream commit 08d7a73fffb6769b1cf2278bf697e692daba3abf ]
As per the iWave RZ/G1M schematic, the signal LVDS_PPEN controls the
supply voltage for the touch panel, LVDS receiver and RGB LCD panel. Add
a regulator for these device nodes and remove the powerdown-gpios
property from the lvds-receiver node as it results in a touch controller
driver probe failure.
Fixes: 6f89dd9e9325 ("ARM: dts: iwg20d-q7-common: Add LCD support")
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ebbe1518ef8a6..63cafd220dba1 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -57,7 +57,7 @@ lcd_backlight: backlight {
lvds-receiver {
compatible = "ti,ds90cf384a", "lvds-decoder";
- powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
+ power-supply = <&vcc_3v3_tft1>;
ports {
#address-cells = <1>;
@@ -81,6 +81,7 @@ lvds_receiver_out: endpoint {
panel {
compatible = "edt,etm0700g0dh6";
backlight = <&lcd_backlight>;
+ power-supply = <&vcc_3v3_tft1>;
port {
panel_in: endpoint {
@@ -113,6 +114,17 @@ sndcodec: simple-audio-card,codec {
};
};
+ vcc_3v3_tft1: regulator-panel {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc-3v3-tft1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ startup-delay-us = <500>;
+ gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ };
+
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
@@ -207,6 +219,7 @@ touch: touchpanel@38 {
reg = <0x38>;
interrupt-parent = <&gpio2>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <&vcc_3v3_tft1>;
};
};
--
2.25.1
From: Colin Ian King <[email protected]>
[ Upstream commit a48faebe65b0db55a73b9220c3d919eee849bb79 ]
There is an off-by-one array check that can lead to a out-of-bounds
write to devices->info[i]. Fix this by checking by using >= rather
than > for the size check. Also replace hard-coded array size limit
with ARRAY_SIZE on the array.
Addresses-Coverity: ("Out-of-bounds write")
Fixes: cd9e9808d18f ("lightnvm: Support for Open-Channel SSDs")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/lightnvm/core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index db38a68abb6c0..a6f4ca438bca1 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -1315,8 +1315,9 @@ static long nvm_ioctl_get_devices(struct file *file, void __user *arg)
strlcpy(info->bmname, "gennvm", sizeof(info->bmname));
i++;
- if (i > 31) {
- pr_err("max 31 devices can be reported.\n");
+ if (i >= ARRAY_SIZE(devices->info)) {
+ pr_err("max %zd devices can be reported.\n",
+ ARRAY_SIZE(devices->info));
break;
}
}
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit 64157b2cb1940449e7df2670e85781c690266588 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/exynos4-is/mipi-csis.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 540151bbf58f2..1aac167abb175 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -510,8 +510,10 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
if (enable) {
s5pcsis_clear_counters(state);
ret = pm_runtime_get_sync(&state->pdev->dev);
- if (ret && ret != 1)
+ if (ret && ret != 1) {
+ pm_runtime_put_noidle(&state->pdev->dev);
return ret;
+ }
}
mutex_lock(&state->lock);
--
2.25.1
From: Kaige Li <[email protected]>
[ Upstream commit 44a0a3c17919db1498cebb02ecf3cf4abc1ade7b ]
The related system resources were not released when pci_set_dma_mask(),
pci_set_consistent_dma_mask(), or pci_iomap() return error in the
amd_ntb_init_pci() function. Add pci_release_regions() to fix it.
Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge")
Signed-off-by: Kaige Li <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ntb/hw/amd/ntb_hw_amd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ntb/hw/amd/ntb_hw_amd.c b/drivers/ntb/hw/amd/ntb_hw_amd.c
index 88e1db65be02c..71428d8cbcfc5 100644
--- a/drivers/ntb/hw/amd/ntb_hw_amd.c
+++ b/drivers/ntb/hw/amd/ntb_hw_amd.c
@@ -1203,6 +1203,7 @@ static int amd_ntb_init_pci(struct amd_ntb_dev *ndev,
err_dma_mask:
pci_clear_master(pdev);
+ pci_release_regions(pdev);
err_pci_regions:
pci_disable_device(pdev);
err_pci_enable:
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit 7ef64ceea0008c17e94a8a2c60c5d6d46f481996 ]
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/exynos4-is/fimc-isp.c | 4 +++-
drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index cde0d254ec1c4..a77c49b185115 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -305,8 +305,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
if (on) {
ret = pm_runtime_get_sync(&is->pdev->dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put(&is->pdev->dev);
return ret;
+ }
set_bit(IS_ST_PWR_ON, &is->state);
ret = fimc_is_start_firmware(is);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index 394e0818f2d5c..92130d7791378 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -470,7 +470,7 @@ static int fimc_lite_open(struct file *file)
set_bit(ST_FLITE_IN_USE, &fimc->state);
ret = pm_runtime_get_sync(&fimc->pdev->dev);
if (ret < 0)
- goto unlock;
+ goto err_pm;
ret = v4l2_fh_open(file);
if (ret < 0)
--
2.25.1
From: Holger Assmann <[email protected]>
[ Upstream commit 42a31ac6698681363363d48335559d212a26a7ca ]
The KSZ9031 PHY skew timings for rxc/txc, originally set to achieve
the desired phase shift between clock- and data-signal, now trigger a
kernel warning when used in rgmii-id mode:
*-skew-ps values should be used only with phy-mode = "rgmii"
This is because commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode
support for the KSZ9031 PHY") now configures own timings when
phy-mode = "rgmii-id". Device trees wanting to set their own delays
should use phy-mode "rgmii" instead as the warning prescribes.
The "standard" timings now used with "rgmii-id" work fine on this
board, so drop the explicit timings in the device tree and thereby
silence the warning.
Fixes: 666b5ca85cd3 ("ARM: dts: stm32: add STM32MP1-based Linux Automation MC-1 board")
Signed-off-by: Holger Assmann <[email protected]>
Acked-by: Ahmad Fatoum <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 5700e6b700d36..b85025d009437 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -121,8 +121,6 @@ ethphy: ethernet-phy@3 { /* KSZ9031RN */
reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
interrupt-parent = <&gpioa>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
- rxc-skew-ps = <1860>;
- txc-skew-ps = <1860>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
micrel,force-master;
--
2.25.1
From: Dennis YC Hsieh <[email protected]>
[ Upstream commit 23c22299cd290409c6b78f57c42b64f8dfb6dd92 ]
Add clear parameter to let client decide if
event should be clear to 0 after GCE receive it.
Signed-off-by: Dennis YC Hsieh <[email protected]>
Acked-by: Chun-Kuang Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[mb: fix commit message]
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +-
drivers/soc/mediatek/mtk-cmdq-helper.c | 5 +++--
include/linux/mailbox/mtk-cmdq-mailbox.h | 3 +--
include/linux/soc/mediatek/mtk-cmdq.h | 5 +++--
4 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index d8b43500f12d1..f64c83dc6644e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -485,7 +485,7 @@ static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
mbox_flush(mtk_crtc->cmdq_client->chan, 2000);
cmdq_handle = cmdq_pkt_create(mtk_crtc->cmdq_client, PAGE_SIZE);
cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event);
- cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event);
+ cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, true);
mtk_crtc_ddp_config(crtc, cmdq_handle);
cmdq_pkt_flush_async(cmdq_handle, ddp_cmdq_cb, cmdq_handle);
}
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 87ee9f767b7af..d8ace96832bac 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -213,15 +213,16 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear)
{
struct cmdq_instruction inst = { {0} };
+ u32 clear_option = clear ? CMDQ_WFE_UPDATE : 0;
if (event >= CMDQ_MAX_EVENT)
return -EINVAL;
inst.op = CMDQ_CODE_WFE;
- inst.value = CMDQ_WFE_OPTION;
+ inst.value = CMDQ_WFE_OPTION | clear_option;
inst.event = event;
return cmdq_pkt_append_command(pkt, inst);
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index a4dc45fbec0a4..23bc366f6c3b3 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -27,8 +27,7 @@
* bit 16-27: update value
* bit 31: 1 - update, 0 - no update
*/
-#define CMDQ_WFE_OPTION (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
- CMDQ_WFE_WAIT_VALUE)
+#define CMDQ_WFE_OPTION (CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE)
/** cmdq event maximum */
#define CMDQ_MAX_EVENT 0x3ff
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index a74c1d5acdf3c..cb71dca985589 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -105,11 +105,12 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
/**
* cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
* @pkt: the CMDQ packet
- * @event: the desired event type to "wait and CLEAR"
+ * @event: the desired event type to wait
+ * @clear: clear event or not after event arrive
*
* Return: 0 for success; else the error code is returned
*/
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear);
/**
* cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
--
2.25.1
From: Dennis YC Hsieh <[email protected]>
[ Upstream commit bee1abc9cc021f50b90f22a589d9ddc816a80db0 ]
No need to clear event again since event always clear before wait.
This fix depend on patch:
"soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api"
Fixes: 2f965be7f9008 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Dennis YC Hsieh <[email protected]>
Reviewed-by: Bibby Hsieh <[email protected]>
Acked-by: Chun-Kuang Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index f64c83dc6644e..2d01a293aa782 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -485,7 +485,7 @@ static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
mbox_flush(mtk_crtc->cmdq_client->chan, 2000);
cmdq_handle = cmdq_pkt_create(mtk_crtc->cmdq_client, PAGE_SIZE);
cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event);
- cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, true);
+ cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, false);
mtk_crtc_ddp_config(crtc, cmdq_handle);
cmdq_pkt_flush_async(cmdq_handle, ddp_cmdq_cb, cmdq_handle);
}
--
2.25.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit c91dfc9818df5f43c10c727f1cecaebdb5e2fa92 ]
According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be
used with SYS-DMAC0 on R-Car E3.
Fixes: 62c0056f1c3eb15d ("arm64: dts: renesas: r8a774c0: Add MSIOF nodes")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 42171190cce46..065e8fe3a071c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1214,9 +1214,8 @@ msiof1: spi@e6ea0000 {
reg = <0 0xe6ea0000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 210>;
- dmas = <&dmac1 0x43>, <&dmac1 0x42>,
- <&dmac2 0x43>, <&dmac2 0x42>;
- dma-names = "tx", "rx", "tx", "rx";
+ dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
--
2.25.1
From: Hsin-Yi Wang <[email protected]>
[ Upstream commit 1276be23fd53e1c4e752966d0eab42aa54a343da ]
bus-width and non-removable is not used by the driver.
max-frequency should be spi-max-frequency for flash node.
Fixes: 689b937bedde ("arm64: dts: mediatek: add mt8173 elm and hana board")
Reported-by: Nicolas Boichat <[email protected]>
Signed-off-by: Hsin-Yi Wang <[email protected]>
Reviewed-by: Enric Balletbo i Serra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index a5a12b2599a4a..01522dd10603e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -431,12 +431,11 @@ &nor_flash {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nor_gpio1_pins>;
- bus-width = <8>;
- max-frequency = <50000000>;
- non-removable;
+
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
+ spi-max-frequency = <50000000>;
};
};
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit dd85345abca60a8916617e8d75c0f9ce334336dd ]
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: 54afbec0d57f ("memory: Freescale CoreNet Coherency Fabric error reporting driver")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/fsl-corenet-cf.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/memory/fsl-corenet-cf.c b/drivers/memory/fsl-corenet-cf.c
index 0b0ed72016da8..0309bd5a18008 100644
--- a/drivers/memory/fsl-corenet-cf.c
+++ b/drivers/memory/fsl-corenet-cf.c
@@ -211,10 +211,8 @@ static int ccf_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, ccf);
irq = platform_get_irq(pdev, 0);
- if (!irq) {
- dev_err(&pdev->dev, "%s: no irq\n", __func__);
- return -ENXIO;
- }
+ if (irq < 0)
+ return irq;
ret = devm_request_irq(&pdev->dev, irq, ccf_irq, 0, pdev->name, ccf);
if (ret) {
--
2.25.1
From: Colin Ian King <[email protected]>
[ Upstream commit 434ac4d51407ce3764a6ae96a89d90b8ae2826fb ]
Currently when pointer scp is null a dev_err is being called that
references the pointer which is the very thing we are trying to
avoid doing. Remove the extraneous error message to avoid this
issue.
Addresses-Coverity: ("Dereference after null check")
Fixes: 63c13d61eafe ("remoteproc/mediatek: add SCP support for mt8183")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/mtk_scp_ipi.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/remoteproc/mtk_scp_ipi.c b/drivers/remoteproc/mtk_scp_ipi.c
index 3d3d87210ef2c..58d1d7e571d66 100644
--- a/drivers/remoteproc/mtk_scp_ipi.c
+++ b/drivers/remoteproc/mtk_scp_ipi.c
@@ -30,10 +30,8 @@ int scp_ipi_register(struct mtk_scp *scp,
scp_ipi_handler_t handler,
void *priv)
{
- if (!scp) {
- dev_err(scp->dev, "scp device is not ready\n");
+ if (!scp)
return -EPROBE_DEFER;
- }
if (WARN_ON(id >= SCP_IPI_MAX) || WARN_ON(handler == NULL))
return -EINVAL;
--
2.25.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit 85d071e7f19a6a9abf30476b90b3819642568756 ]
SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator
Main Oscillator Register) that writing any value other than
0x37 on KEY field aborts the write operation. Use the key when
selecting main clock parent.
Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation")
Signed-off-by: Claudiu Beznea <[email protected]>
Reviewed-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/at91/clk-main.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 37c22667e8319..4313ecb2af5b2 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -437,12 +437,17 @@ static int clk_sam9x5_main_set_parent(struct clk_hw *hw, u8 index)
return -EINVAL;
regmap_read(regmap, AT91_CKGR_MOR, &tmp);
- tmp &= ~MOR_KEY_MASK;
if (index && !(tmp & AT91_PMC_MOSCSEL))
- regmap_write(regmap, AT91_CKGR_MOR, tmp | AT91_PMC_MOSCSEL);
+ tmp = AT91_PMC_MOSCSEL;
else if (!index && (tmp & AT91_PMC_MOSCSEL))
- regmap_write(regmap, AT91_CKGR_MOR, tmp & ~AT91_PMC_MOSCSEL);
+ tmp = 0;
+ else
+ return 0;
+
+ regmap_update_bits(regmap, AT91_CKGR_MOR,
+ AT91_PMC_MOSCSEL | MOR_KEY_MASK,
+ tmp | AT91_PMC_KEY);
while (!clk_sam9x5_main_ready(regmap))
cpu_relax();
--
2.25.1
From: Hanks Chen <[email protected]>
[ Upstream commit 804a892456b73604b7ecfb1b00a96a29f3d2aedf ]
Add MT6779 UART0 clock support.
Fixes: 710774e04861 ("clk: mediatek: Add MT6779 clock support")
Signed-off-by: Wendell Lin <[email protected]>
Signed-off-by: Hanks Chen <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/mediatek/clk-mt6779.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/mediatek/clk-mt6779.c b/drivers/clk/mediatek/clk-mt6779.c
index 9766cccf5844c..6e0d3a1667291 100644
--- a/drivers/clk/mediatek/clk-mt6779.c
+++ b/drivers/clk/mediatek/clk-mt6779.c
@@ -919,6 +919,8 @@ static const struct mtk_gate infra_clks[] = {
"pwm_sel", 19),
GATE_INFRA0(CLK_INFRA_PWM, "infra_pwm",
"pwm_sel", 21),
+ GATE_INFRA0(CLK_INFRA_UART0, "infra_uart0",
+ "uart_sel", 22),
GATE_INFRA0(CLK_INFRA_UART1, "infra_uart1",
"uart_sel", 23),
GATE_INFRA0(CLK_INFRA_UART2, "infra_uart2",
--
2.25.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit bac977cbc0d6731fb8e67c2be0e4acbd959e10b3 ]
Since commit 269a535ca931 ("modpost: generate vmlinux.symvers and
reuse it for the second modpost"), with CONFIG_MODULES disabled,
"make deb-pkg" (or "make bindeb-pkg") fails with:
find: ‘Module.symvers’: No such file or directory
If CONFIG_MODULES is disabled, it doesn't really make sense to build
the linux-headers package.
Fixes: 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost")
Reported-by: Josh Triplett <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/package/builddeb | 6 ++++--
scripts/package/mkdebian | 19 ++++++++++++-------
2 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 6df3c9f8b2da6..8277144298a00 100755
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -202,8 +202,10 @@ EOF
done
if [ "$ARCH" != "um" ]; then
- deploy_kernel_headers debian/linux-headers
- create_package linux-headers-$version debian/linux-headers
+ if is_enabled CONFIG_MODULES; then
+ deploy_kernel_headers debian/linux-headers
+ create_package linux-headers-$version debian/linux-headers
+ fi
deploy_libc_headers debian/linux-libc-dev
create_package linux-libc-dev debian/linux-libc-dev
diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian
index df1adbfb8ead0..9342517778bf3 100755
--- a/scripts/package/mkdebian
+++ b/scripts/package/mkdebian
@@ -183,13 +183,6 @@ Description: Linux kernel, version $version
This package contains the Linux kernel, modules and corresponding other
files, version: $version.
-Package: $kernel_headers_packagename
-Architecture: $debarch
-Description: Linux kernel headers for $version on $debarch
- This package provides kernel header files for $version on $debarch
- .
- This is useful for people who need to build external modules
-
Package: linux-libc-dev
Section: devel
Provides: linux-kernel-headers
@@ -200,6 +193,18 @@ Description: Linux support headers for userspace development
Multi-Arch: same
EOF
+if is_enabled CONFIG_MODULES; then
+cat <<EOF >> debian/control
+
+Package: $kernel_headers_packagename
+Architecture: $debarch
+Description: Linux kernel headers for $version on $debarch
+ This package provides kernel header files for $version on $debarch
+ .
+ This is useful for people who need to build external modules
+EOF
+fi
+
if is_enabled CONFIG_DEBUG_INFO; then
cat <<EOF >> debian/control
--
2.25.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit e222f943519564978e082c152b4140a47e93392c ]
Put node after it has been used.
Fixes: 13f16017d3e3f ("ARM: at91: pm: Tie the USB clock mask to the pmc")
Signed-off-by: Claudiu Beznea <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-at91/pm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 2aab043441e8f..eae8aaaadc3bf 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -800,6 +800,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
soc_pm.data.pmc = of_iomap(pmc_np, 0);
+ of_node_put(pmc_np);
if (!soc_pm.data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
--
2.25.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit f6c992ca7dd4f49042eec61f3fb426c94d901675 ]
In the implementation of bcm2835_register_pll(), the allocated pll is
leaked if devm_clk_hw_register() fails to register hw. Release pll if
devm_clk_hw_register() fails.
Signed-off-by: Navid Emamdoost <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/bcm/clk-bcm2835.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 011802f1a6df9..f18b4d9e9455b 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1337,8 +1337,10 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
pll->hw.init = &init;
ret = devm_clk_hw_register(cprman->dev, &pll->hw);
- if (ret)
+ if (ret) {
+ kfree(pll);
return NULL;
+ }
return &pll->hw;
}
--
2.25.1
From: Robert Hoo <[email protected]>
[ Upstream commit a9e2e0ae686094571378c72d8146b5a1a92d0652 ]
Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or
less what KVM is emulating when MSR_TSC_AUX is not available. In fact,
there are no scenarios in which RDPID is supposed to #GP.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Signed-off-by: Robert Hoo <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/emulate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index d0e2825ae6174..571cb8657e53e 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3594,7 +3594,7 @@ static int em_rdpid(struct x86_emulate_ctxt *ctxt)
u64 tsc_aux = 0;
if (ctxt->ops->get_msr(ctxt, MSR_TSC_AUX, &tsc_aux))
- return emulate_gp(ctxt, 0);
+ return emulate_ud(ctxt);
ctxt->dst.val = tsc_aux;
return X86EMUL_CONTINUE;
}
--
2.25.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ]
If imx6ul_tsc_init() fails then we need to clean up the clocks.
I reversed the "if (input_dev->users) {" condition to make the code a
bit simpler.
Fixes: 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20200905124942.GC183976@mwanda
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/imx6ul_tsc.c | 27 +++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c
index 9ed258854349b..5e6ba5c4eca2a 100644
--- a/drivers/input/touchscreen/imx6ul_tsc.c
+++ b/drivers/input/touchscreen/imx6ul_tsc.c
@@ -530,20 +530,25 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev)
mutex_lock(&input_dev->mutex);
- if (input_dev->users) {
- retval = clk_prepare_enable(tsc->adc_clk);
- if (retval)
- goto out;
-
- retval = clk_prepare_enable(tsc->tsc_clk);
- if (retval) {
- clk_disable_unprepare(tsc->adc_clk);
- goto out;
- }
+ if (!input_dev->users)
+ goto out;
- retval = imx6ul_tsc_init(tsc);
+ retval = clk_prepare_enable(tsc->adc_clk);
+ if (retval)
+ goto out;
+
+ retval = clk_prepare_enable(tsc->tsc_clk);
+ if (retval) {
+ clk_disable_unprepare(tsc->adc_clk);
+ goto out;
}
+ retval = imx6ul_tsc_init(tsc);
+ if (retval) {
+ clk_disable_unprepare(tsc->tsc_clk);
+ clk_disable_unprepare(tsc->adc_clk);
+ goto out;
+ }
out:
mutex_unlock(&input_dev->mutex);
return retval;
--
2.25.1
From: Francesco Ruggeri <[email protected]>
[ Upstream commit 4f25434bccc28cf8a07876ef5142a2869a674353 ]
If the first packet conntrack sees after a re-register is an outgoing
keepalive packet with no data (SEG.SEQ = SND.NXT-1), td_end is set to
SND.NXT-1.
When the peer correctly acknowledges SND.NXT, tcp_in_window fails
check III (Upper bound for valid (s)ack: sack <= receiver.td_end) and
returns false, which cascades into nf_conntrack_in setting
skb->_nfct = 0 and in later conntrack iptables rules not matching.
In cases where iptables are dropping packets that do not match
conntrack rules this can result in idle tcp connections to time out.
v2: adjust td_end when getting the reply rather than when sending out
the keepalive packet.
Fixes: f94e63801ab2 ("netfilter: conntrack: reset tcp maxwin on re-register")
Signed-off-by: Francesco Ruggeri <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conntrack_proto_tcp.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 1926fd56df56a..848b137151c26 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -541,13 +541,20 @@ static bool tcp_in_window(const struct nf_conn *ct,
swin = win << sender->td_scale;
sender->td_maxwin = (swin == 0 ? 1 : swin);
sender->td_maxend = end + sender->td_maxwin;
- /*
- * We haven't seen traffic in the other direction yet
- * but we have to tweak window tracking to pass III
- * and IV until that happens.
- */
- if (receiver->td_maxwin == 0)
+ if (receiver->td_maxwin == 0) {
+ /* We haven't seen traffic in the other
+ * direction yet but we have to tweak window
+ * tracking to pass III and IV until that
+ * happens.
+ */
receiver->td_end = receiver->td_maxend = sack;
+ } else if (sack == receiver->td_end + 1) {
+ /* Likely a reply to a keepalive.
+ * Needed for III.
+ */
+ receiver->td_end++;
+ }
+
}
} else if (((state->state == TCP_CONNTRACK_SYN_SENT
&& dir == IP_CT_DIR_ORIGINAL)
--
2.25.1
From: Xiao Yang <[email protected]>
[ Upstream commit aa2f77920b743c44e02e2dc8474bbf8bd30007a2 ]
inline_data is mutually exclusive to DAX so enabling both of them triggers
the following issue:
------------------------------------------
# mkfs.ext4 -F -O inline_data /dev/pmem1
...
# mount /dev/pmem1 /mnt
# echo 'test' >/mnt/file
# lsattr -l /mnt/file
/mnt/file Inline_Data
# xfs_io -c "chattr +x" /mnt/file
# xfs_io -c "lsattr -v" /mnt/file
[dax] /mnt/file
# umount /mnt
# mount /dev/pmem1 /mnt
# cat /mnt/file
cat: /mnt/file: Numerical result out of range
------------------------------------------
Fixes: b383a73f2b83 ("fs/ext4: Introduce DAX inode flag")
Signed-off-by: Xiao Yang <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Reviewed-by: Andreas Dilger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/ext4.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index ff46defc65683..dc943e714d142 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -466,7 +466,7 @@ struct flex_groups {
/* Flags which are mutually exclusive to DAX */
#define EXT4_DAX_MUT_EXCL (EXT4_VERITY_FL | EXT4_ENCRYPT_FL |\
- EXT4_JOURNAL_DATA_FL)
+ EXT4_JOURNAL_DATA_FL | EXT4_INLINE_DATA_FL)
/* Mask out flags that are inappropriate for the given type of inode. */
static inline __u32 ext4_mask_flags(umode_t mode, __u32 flags)
--
2.25.1
From: Johnny Chuang <[email protected]>
[ Upstream commit 93f634069707cfe562c38739f5062feccbe9a834 ]
Fixed typo for command from 0xE0 to 0xD0.
Fixes: cf520c643012 ("Input: elants_i2c - provide an attribute to show calibration count")
Signed-off-by: Johnny Chuang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/elants_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 5477a5718202a..db7f27d4734a9 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -90,7 +90,7 @@
/* FW read command, 0x53 0x?? 0x0, 0x01 */
#define E_ELAN_INFO_FW_VER 0x00
#define E_ELAN_INFO_BC_VER 0x10
-#define E_ELAN_INFO_REK 0xE0
+#define E_ELAN_INFO_REK 0xD0
#define E_ELAN_INFO_TEST_VER 0xE0
#define E_ELAN_INFO_FW_ID 0xF0
#define E_INFO_OSR 0xD6
--
2.25.1
From: Dan Aloni <[email protected]>
[ Upstream commit c327a310ec4d6ecbea13185ed56c11def441d9ab ]
This was discovered using O_DIRECT at the client side, with small
unaligned file offsets or IOs that span multiple file pages.
Fixes: e248aa7be86 ("svcrdma: Remove max_sge check at connect time")
Signed-off-by: Dan Aloni <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/xprtrdma/svc_rdma_sendto.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 38e7c3c8c4a9c..e4f410084c748 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -637,10 +637,11 @@ static int svc_rdma_pull_up_reply_msg(struct svcxprt_rdma *rdma,
while (remaining) {
len = min_t(u32, PAGE_SIZE - pageoff, remaining);
- memcpy(dst, page_address(*ppages), len);
+ memcpy(dst, page_address(*ppages) + pageoff, len);
remaining -= len;
dst += len;
pageoff = 0;
+ ppages++;
}
}
--
2.25.1
From: Jiri Slaby <[email protected]>
[ Upstream commit f3013f7ed465479e60c1ab1921a5718fc541cc3b ]
'perf trace ls' started crashing after commit d21cb73a9025 on
!HAVE_SYSCALL_TABLE_SUPPORT configs (armv7l here) like this:
0 strlen () at ../sysdeps/arm/armv6t2/strlen.S:126
1 0xb6800780 in __vfprintf_internal (s=0xbeff9908, s@entry=0xbeff9900, format=0xa27160 "]: %s()", ap=..., mode_flags=<optimized out>) at vfprintf-internal.c:1688
...
5 0x0056ecdc in fprintf (__fmt=0xa27160 "]: %s()", __stream=<optimized out>) at /usr/include/bits/stdio2.h:100
6 trace__sys_exit (trace=trace@entry=0xbeffc710, evsel=evsel@entry=0xd968d0, event=<optimized out>, sample=sample@entry=0xbeffc3e8) at builtin-trace.c:2475
7 0x00566d40 in trace__handle_event (sample=0xbeffc3e8, event=<optimized out>, trace=0xbeffc710) at builtin-trace.c:3122
...
15 main (argc=2, argv=0xbefff6e8) at perf.c:538
It is because memset in trace__read_syscall_info zeroes wrong memory:
1) when initializing for the first time, it does not reset the last id.
2) in other cases, it resets the last id of previous buffer.
ad 1) it causes the crash above as sc->name used in the fprintf above
contains garbage.
ad 2) it sets nonexistent from true back to false for id 11 here. Not
sure, what the consequences are.
So fix it by introducing a special case for the initial initialization
and do the right +1 in both cases.
Fixes: d21cb73a9025 ("perf trace: Grow the syscall table as needed when using libaudit")
Signed-off-by: Jiri Slaby <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/builtin-trace.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 4cbb64edc9983..83e8cd663b4e4 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -1762,7 +1762,11 @@ static int trace__read_syscall_info(struct trace *trace, int id)
if (table == NULL)
return -ENOMEM;
- memset(table + trace->sctbl->syscalls.max_id, 0, (id - trace->sctbl->syscalls.max_id) * sizeof(*sc));
+ // Need to memset from offset 0 and +1 members if brand new
+ if (trace->syscalls.table == NULL)
+ memset(table, 0, (id + 1) * sizeof(*sc));
+ else
+ memset(table + trace->sctbl->syscalls.max_id + 1, 0, (id - trace->sctbl->syscalls.max_id) * sizeof(*sc));
trace->syscalls.table = table;
trace->sctbl->syscalls.max_id = id;
--
2.25.1
From: Ye Bin <[email protected]>
[ Upstream commit 70022da804f0f3f152115688885608c39182082e ]
As we test disk offline/online with running fsstress, we find fsstress
process is keeping running state.
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
....
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
ext4_mb_new_blocks
repeat:
ext4_mb_discard_preallocations_should_retry(sb, ac, &seq)
freed = ext4_mb_discard_preallocations
ext4_mb_discard_group_preallocations
this_cpu_inc(discard_pa_seq);
---> freed == 0
seq_retry = ext4_get_discard_pa_seq_sum
for_each_possible_cpu(__cpu)
__seq += per_cpu(discard_pa_seq, __cpu);
if (seq_retry != *seq) {
*seq = seq_retry;
ret = true;
}
As we see seq_retry is sum of discard_pa_seq every cpu, if
ext4_mb_discard_group_preallocations return zero discard_pa_seq in this
cpu maybe increase one, so condition "seq_retry != *seq" have always
been met.
Ritesh Harjani suggest to in ext4_mb_discard_group_preallocations function we
only increase discard_pa_seq when there is some PA to free.
Fixes: 07b5b8e1ac40 ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
Signed-off-by: Ye Bin <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Ritesh Harjani <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/mballoc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index e88eff999bd15..787a894f5d1da 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4066,7 +4066,6 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
INIT_LIST_HEAD(&list);
repeat:
ext4_lock_group(sb, group);
- this_cpu_inc(discard_pa_seq);
list_for_each_entry_safe(pa, tmp,
&grp->bb_prealloc_list, pa_group_list) {
spin_lock(&pa->pa_lock);
@@ -4083,6 +4082,9 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
/* seems this one can be freed ... */
ext4_mb_mark_pa_deleted(sb, pa);
+ if (!free)
+ this_cpu_inc(discard_pa_seq);
+
/* we can trust pa_free ... */
free += pa->pa_free;
--
2.25.1
From: Guenter Roeck <[email protected]>
[ Upstream commit 08c619b4923056b5dd2d5045757468c76ad0e3fe ]
EFCH_PM_DECODEEN3 is supposed to access DECODEEN register bits 24..31,
in other words the register at byte offset 3.
Cc: Jan Kiszka <[email protected]>
Fixes: 887d2ec51e34b ("watchdog: sp5100_tco: Add support for recent FCH versions")
Tested-by: Jan Kiszka <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/sp5100_tco.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
index 87eaf357ae01f..adf015aa4126f 100644
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -70,7 +70,7 @@
#define EFCH_PM_DECODEEN_WDT_TMREN BIT(7)
-#define EFCH_PM_DECODEEN3 0x00
+#define EFCH_PM_DECODEEN3 0x03
#define EFCH_PM_DECODEEN_SECOND_RES GENMASK(1, 0)
#define EFCH_PM_WATCHDOG_DISABLE ((u8)GENMASK(3, 2))
--
2.25.1
From: Alex Williamson <[email protected]>
[ Upstream commit 852b1beecb6ff9326f7ca4bc0fe69ae860ebdb9e ]
The eventfd context is used as our irqbypass token, therefore if an
eventfd is re-used, our token is the same. The irqbypass code will
return an -EBUSY in this case, but we'll still attempt to unregister
the producer, where if that duplicate token still exists, results in
removing the wrong object. Clear the token of failed producers so
that they harmlessly fall out when unregistered.
Fixes: 6d7425f109d2 ("vfio: Register/unregister irq_bypass_producer")
Reported-by: guomin chen <[email protected]>
Tested-by: guomin chen <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/pci/vfio_pci_intrs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index 1d9fb25929459..869dce5f134dd 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -352,11 +352,13 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
vdev->ctx[vector].producer.token = trigger;
vdev->ctx[vector].producer.irq = irq;
ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
- if (unlikely(ret))
+ if (unlikely(ret)) {
dev_info(&pdev->dev,
"irq bypass producer (token %p) registration fails: %d\n",
vdev->ctx[vector].producer.token, ret);
+ vdev->ctx[vector].producer.token = NULL;
+ }
vdev->ctx[vector].trigger = trigger;
return 0;
--
2.25.1
From: Matthew Wilcox (Oracle) <[email protected]>
[ Upstream commit 8fb156c9ee2db94f7127c930c89917634a1a9f56 ]
The implementation of split_page_owner() prefers a count rather than the
old order of the page. When we support a variable size THP, we won't
have the order at this point, but we will have the number of pages.
So change the interface to what the caller and callee would prefer.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: SeongJae Park <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Huang Ying <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/page_owner.h | 6 +++---
mm/huge_memory.c | 2 +-
mm/page_alloc.c | 2 +-
mm/page_owner.c | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/include/linux/page_owner.h b/include/linux/page_owner.h
index 8679ccd722e89..3468794f83d23 100644
--- a/include/linux/page_owner.h
+++ b/include/linux/page_owner.h
@@ -11,7 +11,7 @@ extern struct page_ext_operations page_owner_ops;
extern void __reset_page_owner(struct page *page, unsigned int order);
extern void __set_page_owner(struct page *page,
unsigned int order, gfp_t gfp_mask);
-extern void __split_page_owner(struct page *page, unsigned int order);
+extern void __split_page_owner(struct page *page, unsigned int nr);
extern void __copy_page_owner(struct page *oldpage, struct page *newpage);
extern void __set_page_owner_migrate_reason(struct page *page, int reason);
extern void __dump_page_owner(struct page *page);
@@ -31,10 +31,10 @@ static inline void set_page_owner(struct page *page,
__set_page_owner(page, order, gfp_mask);
}
-static inline void split_page_owner(struct page *page, unsigned int order)
+static inline void split_page_owner(struct page *page, unsigned int nr)
{
if (static_branch_unlikely(&page_owner_inited))
- __split_page_owner(page, order);
+ __split_page_owner(page, nr);
}
static inline void copy_page_owner(struct page *oldpage, struct page *newpage)
{
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 74300e337c3c7..358403422104b 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2449,7 +2449,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
ClearPageCompound(head);
- split_page_owner(head, HPAGE_PMD_ORDER);
+ split_page_owner(head, HPAGE_PMD_NR);
/* See comment in __split_huge_page_tail() */
if (PageAnon(head)) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 802f00540a3d2..8cc774340d490 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3213,7 +3213,7 @@ void split_page(struct page *page, unsigned int order)
for (i = 1; i < (1 << order); i++)
set_page_refcounted(page + i);
- split_page_owner(page, order);
+ split_page_owner(page, 1 << order);
}
EXPORT_SYMBOL_GPL(split_page);
diff --git a/mm/page_owner.c b/mm/page_owner.c
index 3604615094235..4ca3051a10358 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -204,7 +204,7 @@ void __set_page_owner_migrate_reason(struct page *page, int reason)
page_owner->last_migrate_reason = reason;
}
-void __split_page_owner(struct page *page, unsigned int order)
+void __split_page_owner(struct page *page, unsigned int nr)
{
int i;
struct page_ext *page_ext = lookup_page_ext(page);
@@ -213,7 +213,7 @@ void __split_page_owner(struct page *page, unsigned int order)
if (unlikely(!page_ext))
return;
- for (i = 0; i < (1 << order); i++) {
+ for (i = 0; i < nr; i++) {
page_owner = get_page_owner(page_ext);
page_owner->order = 0;
page_ext = page_ext_next(page_ext);
--
2.25.1
From: Matthew Rosato <[email protected]>
[ Upstream commit 515ecd5368f1510152fa4f9b9ce55b66ac56c334 ]
While it is true that devices with is_virtfn=1 will have a Memory Space
Enable bit that is hard-wired to 0, this is not the only case where we
see this behavior -- For example some bare-metal hypervisors lack
Memory Space Enable bit emulation for devices not setting is_virtfn
(s390). Fix this by instead checking for the newly-added
no_command_memory bit which directly denotes the need for
PCI_COMMAND_MEMORY emulation in vfio.
Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <[email protected]>
Reviewed-by: Niklas Schnelle <[email protected]>
Reviewed-by: Pierre Morel <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/pci/vfio_pci_config.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index d98843feddce0..5076d0155bc3f 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -406,7 +406,7 @@ bool __vfio_pci_memory_enabled(struct vfio_pci_device *vdev)
* PF SR-IOV capability, there's therefore no need to trigger
* faults based on the virtual value.
*/
- return pdev->is_virtfn || (cmd & PCI_COMMAND_MEMORY);
+ return pdev->no_command_memory || (cmd & PCI_COMMAND_MEMORY);
}
/*
@@ -520,8 +520,8 @@ static int vfio_basic_config_read(struct vfio_pci_device *vdev, int pos,
count = vfio_default_config_read(vdev, pos, count, perm, offset, val);
- /* Mask in virtual memory enable for SR-IOV devices */
- if (offset == PCI_COMMAND && vdev->pdev->is_virtfn) {
+ /* Mask in virtual memory enable */
+ if (offset == PCI_COMMAND && vdev->pdev->no_command_memory) {
u16 cmd = le16_to_cpu(*(__le16 *)&vdev->vconfig[PCI_COMMAND]);
u32 tmp_val = le32_to_cpu(*val);
@@ -589,9 +589,11 @@ static int vfio_basic_config_write(struct vfio_pci_device *vdev, int pos,
* shows it disabled (phys_mem/io, then the device has
* undergone some kind of backdoor reset and needs to be
* restored before we allow it to enable the bars.
- * SR-IOV devices will trigger this, but we catch them later
+ * SR-IOV devices will trigger this - for mem enable let's
+ * catch this now and for io enable it will be caught later
*/
- if ((new_mem && virt_mem && !phys_mem) ||
+ if ((new_mem && virt_mem && !phys_mem &&
+ !pdev->no_command_memory) ||
(new_io && virt_io && !phys_io) ||
vfio_need_bar_restore(vdev))
vfio_bar_restore(vdev);
@@ -1734,12 +1736,14 @@ int vfio_config_init(struct vfio_pci_device *vdev)
vconfig[PCI_INTERRUPT_PIN]);
vconfig[PCI_INTERRUPT_PIN] = 0; /* Gratuitous for good VFs */
-
+ }
+ if (pdev->no_command_memory) {
/*
- * VFs do no implement the memory enable bit of the COMMAND
- * register therefore we'll not have it set in our initial
- * copy of config space after pci_enable_device(). For
- * consistency with PFs, set the virtual enable bit here.
+ * VFs and devices that set pdev->no_command_memory do not
+ * implement the memory enable bit of the COMMAND register
+ * therefore we'll not have it set in our initial copy of
+ * config space after pci_enable_device(). For consistency
+ * with PFs, set the virtual enable bit here.
*/
*(__le16 *)&vconfig[PCI_COMMAND] |=
cpu_to_le16(PCI_COMMAND_MEMORY);
--
2.25.1
From: David Howells <[email protected]>
[ Upstream commit 1d0e850a49a5b56f8f3cb51e74a11e2fedb96be6 ]
Fix cell removal by inserting a more final state than AFS_CELL_FAILED that
indicates that the cell has been unpublished in case the manager is already
requeued and will go through again. The new AFS_CELL_REMOVED state will
just immediately leave the manager function.
Going through a second time in the AFS_CELL_FAILED state will cause it to
try to remove the cell again, potentially leading to the proc list being
removed.
Fixes: 989782dcdc91 ("afs: Overhaul cell database management")
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Suggested-by: Hillf Danton <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: Hillf Danton <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/cell.c | 16 ++++++++++------
fs/afs/internal.h | 1 +
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index 1944be78e9b0d..bc7ed46aaca9f 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -291,11 +291,11 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
wait_var_event(&cell->state,
({
state = smp_load_acquire(&cell->state); /* vs error */
- state == AFS_CELL_ACTIVE || state == AFS_CELL_FAILED;
+ state == AFS_CELL_ACTIVE || state == AFS_CELL_REMOVED;
}));
/* Check the state obtained from the wait check. */
- if (state == AFS_CELL_FAILED) {
+ if (state == AFS_CELL_REMOVED) {
ret = cell->error;
goto error;
}
@@ -700,7 +700,6 @@ static void afs_deactivate_cell(struct afs_net *net, struct afs_cell *cell)
static void afs_manage_cell(struct afs_cell *cell)
{
struct afs_net *net = cell->net;
- bool deleted;
int ret, active;
_enter("%s", cell->name);
@@ -712,13 +711,15 @@ static void afs_manage_cell(struct afs_cell *cell)
case AFS_CELL_FAILED:
down_write(&net->cells_lock);
active = 1;
- deleted = atomic_try_cmpxchg_relaxed(&cell->active, &active, 0);
- if (deleted) {
+ if (atomic_try_cmpxchg_relaxed(&cell->active, &active, 0)) {
rb_erase(&cell->net_node, &net->cells);
+ smp_store_release(&cell->state, AFS_CELL_REMOVED);
}
up_write(&net->cells_lock);
- if (deleted)
+ if (cell->state == AFS_CELL_REMOVED) {
+ wake_up_var(&cell->state);
goto final_destruction;
+ }
if (cell->state == AFS_CELL_FAILED)
goto done;
smp_store_release(&cell->state, AFS_CELL_UNSET);
@@ -760,6 +761,9 @@ static void afs_manage_cell(struct afs_cell *cell)
wake_up_var(&cell->state);
goto again;
+ case AFS_CELL_REMOVED:
+ goto done;
+
default:
break;
}
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 522597b401fec..7689f4535ef9c 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -326,6 +326,7 @@ enum afs_cell_state {
AFS_CELL_DEACTIVATING,
AFS_CELL_INACTIVE,
AFS_CELL_FAILED,
+ AFS_CELL_REMOVED,
};
/*
--
2.25.1
From: Hauke Mehrtens <[email protected]>
[ Upstream commit b39c0615d0667b3a6f2f5c4bf99ffadf3b518bb1 ]
dev_get_drvdata() is called in img_pwm_runtime_resume() before the
driver data is set.
When pm_runtime_enabled() returns false in img_pwm_probe() it calls
img_pwm_runtime_resume() which results in a null pointer access.
This patch fixes the problem by setting the driver data earlier in the
img_pwm_probe() function.
This crash was seen when booting the Imagination Technologies Creator
Ci40 (Marduk) with kernel 5.4 in OpenWrt.
Fixes: e690ae526216 ("pwm: img: Add runtime PM")
Signed-off-by: Hauke Mehrtens <[email protected]>
Acked-by: Lee Jones <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-img.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c
index 599a0f66a3845..a34d95ed70b20 100644
--- a/drivers/pwm/pwm-img.c
+++ b/drivers/pwm/pwm-img.c
@@ -277,6 +277,8 @@ static int img_pwm_probe(struct platform_device *pdev)
return PTR_ERR(pwm->pwm_clk);
}
+ platform_set_drvdata(pdev, pwm);
+
pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_PWM_PM_TIMEOUT);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -313,7 +315,6 @@ static int img_pwm_probe(struct platform_device *pdev)
goto err_suspend;
}
- platform_set_drvdata(pdev, pwm);
return 0;
err_suspend:
--
2.25.1
From: David Howells <[email protected]>
[ Upstream commit 88c853c3f5c0a07c5db61b494ee25152535cfeee ]
Management of the lifetime of afs_cell struct has some problems due to the
usage counter being used to determine whether objects of that type are in
use in addition to whether anyone might be interested in the structure.
This is made trickier by cell objects being cached for a period of time in
case they're quickly reused as they hold the result of a setup process that
may be slow (DNS lookups, AFS RPC ops).
Problems include the cached root volume from alias resolution pinning its
parent cell record, rmmod occasionally hanging and occasionally producing
assertion failures.
Fix this by splitting the count of active users from the struct reference
count. Things then work as follows:
(1) The cell cache keeps +1 on the cell's activity count and this has to
be dropped before the cell can be removed. afs_manage_cell() tries to
exchange the 1 to a 0 with the cells_lock write-locked, and if
successful, the record is removed from the net->cells.
(2) One struct ref is 'owned' by the activity count. That is put when the
active count is reduced to 0 (final_destruction label).
(3) A ref can be held on a cell whilst it is queued for management on a
work queue without confusing the active count. afs_queue_cell() is
added to wrap this.
(4) The queue's ref is dropped at the end of the management. This is
split out into a separate function, afs_manage_cell_work().
(5) The root volume record is put after a cell is removed (at the
final_destruction label) rather then in the RCU destruction routine.
(6) Volumes hold struct refs, but aren't active users.
(7) Both counts are displayed in /proc/net/afs/cells.
There are some management function changes:
(*) afs_put_cell() now just decrements the refcount and triggers the RCU
destruction if it becomes 0. It no longer sets a timer to have the
manager do this.
(*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease
the active count. afs_unuse_cell() sets the management timer.
(*) afs_queue_cell() is added to queue a cell with approprate refs.
There are also some other fixes:
(*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL.
(*) Make sure that candidate cells in lookups are properly destroyed
rather than being simply kfree'd. This ensures the bits it points to
are destroyed also.
(*) afs_dec_cells_outstanding() is now called in cell destruction rather
than at "final_destruction". This ensures that cell->net is still
valid to the end of the destructor.
(*) As a consequence of the previous two changes, move the increment of
net->cells_outstanding that was at the point of insertion into the
tree to the allocation routine to correctly balance things.
Fixes: 989782dcdc91 ("afs: Overhaul cell database management")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/cell.c | 149 +++++++++++++++++++++++++++++++--------------
fs/afs/dynroot.c | 2 +-
fs/afs/internal.h | 8 ++-
fs/afs/mntpt.c | 4 +-
fs/afs/proc.c | 23 ++++---
fs/afs/super.c | 12 ++--
fs/afs/vl_alias.c | 8 +--
fs/afs/vl_rotate.c | 2 +-
fs/afs/volume.c | 4 +-
9 files changed, 136 insertions(+), 76 deletions(-)
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index 5da83e84952a2..c906000b0ff84 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -19,7 +19,7 @@ static unsigned __read_mostly afs_cell_gc_delay = 10;
static unsigned __read_mostly afs_cell_min_ttl = 10 * 60;
static unsigned __read_mostly afs_cell_max_ttl = 24 * 60 * 60;
-static void afs_manage_cell(struct work_struct *);
+static void afs_manage_cell_work(struct work_struct *);
static void afs_dec_cells_outstanding(struct afs_net *net)
{
@@ -62,8 +62,7 @@ static struct afs_cell *afs_find_cell_locked(struct afs_net *net,
cell = net->ws_cell;
if (!cell)
return ERR_PTR(-EDESTADDRREQ);
- afs_get_cell(cell);
- return cell;
+ goto found;
}
p = net->cells.rb_node;
@@ -85,12 +84,12 @@ static struct afs_cell *afs_find_cell_locked(struct afs_net *net,
return ERR_PTR(-ENOENT);
found:
- if (!atomic_inc_not_zero(&cell->usage))
- return ERR_PTR(-ENOENT);
-
- return cell;
+ return afs_use_cell(cell);
}
+/*
+ * Look up and get an activation reference on a cell record.
+ */
struct afs_cell *afs_find_cell(struct afs_net *net,
const char *name, unsigned int namesz)
{
@@ -153,8 +152,9 @@ static struct afs_cell *afs_alloc_cell(struct afs_net *net,
cell->name[i] = tolower(name[i]);
cell->name[i] = 0;
- atomic_set(&cell->usage, 2);
- INIT_WORK(&cell->manager, afs_manage_cell);
+ atomic_set(&cell->ref, 1);
+ atomic_set(&cell->active, 0);
+ INIT_WORK(&cell->manager, afs_manage_cell_work);
cell->volumes = RB_ROOT;
INIT_HLIST_HEAD(&cell->proc_volumes);
seqlock_init(&cell->volume_lock);
@@ -193,6 +193,7 @@ static struct afs_cell *afs_alloc_cell(struct afs_net *net,
cell->dns_source = vllist->source;
cell->dns_status = vllist->status;
smp_store_release(&cell->dns_lookup_count, 1); /* vs source/status */
+ atomic_inc(&net->cells_outstanding);
_leave(" = %p", cell);
return cell;
@@ -275,12 +276,12 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
cell = candidate;
candidate = NULL;
+ atomic_set(&cell->active, 2);
rb_link_node_rcu(&cell->net_node, parent, pp);
rb_insert_color(&cell->net_node, &net->cells);
- atomic_inc(&net->cells_outstanding);
up_write(&net->cells_lock);
- queue_work(afs_wq, &cell->manager);
+ afs_queue_cell(cell);
wait_for_cell:
_debug("wait_for_cell");
@@ -305,16 +306,17 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
if (excl) {
ret = -EEXIST;
} else {
- afs_get_cell(cursor);
+ afs_use_cell(cursor);
ret = 0;
}
up_write(&net->cells_lock);
- kfree(candidate);
+ if (candidate)
+ afs_put_cell(candidate);
if (ret == 0)
goto wait_for_cell;
goto error_noput;
error:
- afs_put_cell(net, cell);
+ afs_unuse_cell(net, cell);
error_noput:
_leave(" = %d [error]", ret);
return ERR_PTR(ret);
@@ -359,7 +361,7 @@ int afs_cell_init(struct afs_net *net, const char *rootcell)
}
if (!test_and_set_bit(AFS_CELL_FL_NO_GC, &new_root->flags))
- afs_get_cell(new_root);
+ afs_use_cell(new_root);
/* install the new cell */
down_write(&net->cells_lock);
@@ -367,7 +369,7 @@ int afs_cell_init(struct afs_net *net, const char *rootcell)
net->ws_cell = new_root;
up_write(&net->cells_lock);
- afs_put_cell(net, old_root);
+ afs_unuse_cell(net, old_root);
_leave(" = 0");
return 0;
}
@@ -473,18 +475,21 @@ static int afs_update_cell(struct afs_cell *cell)
static void afs_cell_destroy(struct rcu_head *rcu)
{
struct afs_cell *cell = container_of(rcu, struct afs_cell, rcu);
+ struct afs_net *net = cell->net;
+ int u;
_enter("%p{%s}", cell, cell->name);
- ASSERTCMP(atomic_read(&cell->usage), ==, 0);
+ u = atomic_read(&cell->ref);
+ ASSERTCMP(u, ==, 0);
- afs_put_volume(cell->net, cell->root_volume, afs_volume_trace_put_cell_root);
- afs_put_vlserverlist(cell->net, rcu_access_pointer(cell->vl_servers));
- afs_put_cell(cell->net, cell->alias_of);
+ afs_put_vlserverlist(net, rcu_access_pointer(cell->vl_servers));
+ afs_unuse_cell(net, cell->alias_of);
key_put(cell->anonymous_key);
kfree(cell->name);
kfree(cell);
+ afs_dec_cells_outstanding(net);
_leave(" [destroyed]");
}
@@ -519,16 +524,50 @@ void afs_cells_timer(struct timer_list *timer)
*/
struct afs_cell *afs_get_cell(struct afs_cell *cell)
{
- atomic_inc(&cell->usage);
+ if (atomic_read(&cell->ref) <= 0)
+ BUG();
+
+ atomic_inc(&cell->ref);
return cell;
}
/*
* Drop a reference on a cell record.
*/
-void afs_put_cell(struct afs_net *net, struct afs_cell *cell)
+void afs_put_cell(struct afs_cell *cell)
+{
+ if (cell) {
+ unsigned int u, a;
+
+ u = atomic_dec_return(&cell->ref);
+ if (u == 0) {
+ a = atomic_read(&cell->active);
+ WARN(a != 0, "Cell active count %u > 0\n", a);
+ call_rcu(&cell->rcu, afs_cell_destroy);
+ }
+ }
+}
+
+/*
+ * Note a cell becoming more active.
+ */
+struct afs_cell *afs_use_cell(struct afs_cell *cell)
+{
+ if (atomic_read(&cell->ref) <= 0)
+ BUG();
+
+ atomic_inc(&cell->active);
+ return cell;
+}
+
+/*
+ * Record a cell becoming less active. When the active counter reaches 1, it
+ * is scheduled for destruction, but may get reactivated.
+ */
+void afs_unuse_cell(struct afs_net *net, struct afs_cell *cell)
{
time64_t now, expire_delay;
+ int a;
if (!cell)
return;
@@ -541,11 +580,21 @@ void afs_put_cell(struct afs_net *net, struct afs_cell *cell)
if (cell->vl_servers->nr_servers)
expire_delay = afs_cell_gc_delay;
- if (atomic_dec_return(&cell->usage) > 1)
- return;
+ a = atomic_dec_return(&cell->active);
+ WARN_ON(a == 0);
+ if (a == 1)
+ /* 'cell' may now be garbage collected. */
+ afs_set_cell_timer(net, expire_delay);
+}
- /* 'cell' may now be garbage collected. */
- afs_set_cell_timer(net, expire_delay);
+/*
+ * Queue a cell for management, giving the workqueue a ref to hold.
+ */
+void afs_queue_cell(struct afs_cell *cell)
+{
+ afs_get_cell(cell);
+ if (!queue_work(afs_wq, &cell->manager))
+ afs_put_cell(cell);
}
/*
@@ -645,12 +694,11 @@ static void afs_deactivate_cell(struct afs_net *net, struct afs_cell *cell)
* Manage a cell record, initialising and destroying it, maintaining its DNS
* records.
*/
-static void afs_manage_cell(struct work_struct *work)
+static void afs_manage_cell(struct afs_cell *cell)
{
- struct afs_cell *cell = container_of(work, struct afs_cell, manager);
struct afs_net *net = cell->net;
bool deleted;
- int ret, usage;
+ int ret, active;
_enter("%s", cell->name);
@@ -660,10 +708,11 @@ static void afs_manage_cell(struct work_struct *work)
case AFS_CELL_INACTIVE:
case AFS_CELL_FAILED:
down_write(&net->cells_lock);
- usage = 1;
- deleted = atomic_try_cmpxchg_relaxed(&cell->usage, &usage, 0);
- if (deleted)
+ active = 1;
+ deleted = atomic_try_cmpxchg_relaxed(&cell->active, &active, 0);
+ if (deleted) {
rb_erase(&cell->net_node, &net->cells);
+ }
up_write(&net->cells_lock);
if (deleted)
goto final_destruction;
@@ -688,7 +737,7 @@ static void afs_manage_cell(struct work_struct *work)
goto again;
case AFS_CELL_ACTIVE:
- if (atomic_read(&cell->usage) > 1) {
+ if (atomic_read(&cell->active) > 1) {
if (test_and_clear_bit(AFS_CELL_FL_DO_LOOKUP, &cell->flags)) {
ret = afs_update_cell(cell);
if (ret < 0)
@@ -701,7 +750,7 @@ static void afs_manage_cell(struct work_struct *work)
goto again;
case AFS_CELL_DEACTIVATING:
- if (atomic_read(&cell->usage) > 1)
+ if (atomic_read(&cell->active) > 1)
goto reverse_deactivation;
afs_deactivate_cell(net, cell);
smp_store_release(&cell->state, AFS_CELL_INACTIVE);
@@ -733,9 +782,18 @@ static void afs_manage_cell(struct work_struct *work)
return;
final_destruction:
- call_rcu(&cell->rcu, afs_cell_destroy);
- afs_dec_cells_outstanding(net);
- _leave(" [destruct %d]", atomic_read(&net->cells_outstanding));
+ /* The root volume is pinning the cell */
+ afs_put_volume(cell->net, cell->root_volume, afs_volume_trace_put_cell_root);
+ cell->root_volume = NULL;
+ afs_put_cell(cell);
+}
+
+static void afs_manage_cell_work(struct work_struct *work)
+{
+ struct afs_cell *cell = container_of(work, struct afs_cell, manager);
+
+ afs_manage_cell(cell);
+ afs_put_cell(cell);
}
/*
@@ -769,21 +827,20 @@ void afs_manage_cells(struct work_struct *work)
for (cursor = rb_first(&net->cells); cursor; cursor = rb_next(cursor)) {
struct afs_cell *cell =
rb_entry(cursor, struct afs_cell, net_node);
- unsigned usage;
+ unsigned active;
bool sched_cell = false;
- usage = atomic_read(&cell->usage);
- _debug("manage %s %u", cell->name, usage);
+ active = atomic_read(&cell->active);
+ _debug("manage %s %u %u", cell->name, atomic_read(&cell->ref), active);
- ASSERTCMP(usage, >=, 1);
+ ASSERTCMP(active, >=, 1);
if (purging) {
if (test_and_clear_bit(AFS_CELL_FL_NO_GC, &cell->flags))
- usage = atomic_dec_return(&cell->usage);
- ASSERTCMP(usage, ==, 1);
+ atomic_dec(&cell->active);
}
- if (usage == 1) {
+ if (active == 1) {
struct afs_vlserver_list *vllist;
time64_t expire_at = cell->last_inactive;
@@ -806,7 +863,7 @@ void afs_manage_cells(struct work_struct *work)
}
if (sched_cell)
- queue_work(afs_wq, &cell->manager);
+ afs_queue_cell(cell);
}
up_read(&net->cells_lock);
@@ -843,7 +900,7 @@ void afs_cell_purge(struct afs_net *net)
ws = net->ws_cell;
net->ws_cell = NULL;
up_write(&net->cells_lock);
- afs_put_cell(net, ws);
+ afs_unuse_cell(net, ws);
_debug("del timer");
if (del_timer_sync(&net->cells_timer))
diff --git a/fs/afs/dynroot.c b/fs/afs/dynroot.c
index 5b8de4fee6cda..da32797dd4257 100644
--- a/fs/afs/dynroot.c
+++ b/fs/afs/dynroot.c
@@ -125,7 +125,7 @@ static int afs_probe_cell_name(struct dentry *dentry)
cell = afs_find_cell(net, name, len);
if (!IS_ERR(cell)) {
- afs_put_cell(net, cell);
+ afs_unuse_cell(net, cell);
return 0;
}
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 3c28292c0cc70..522597b401fec 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -363,7 +363,8 @@ struct afs_cell {
#endif
time64_t dns_expiry; /* Time AFSDB/SRV record expires */
time64_t last_inactive; /* Time of last drop of usage count */
- atomic_t usage;
+ atomic_t ref; /* Struct refcount */
+ atomic_t active; /* Active usage counter */
unsigned long flags;
#define AFS_CELL_FL_NO_GC 0 /* The cell was added manually, don't auto-gc */
#define AFS_CELL_FL_DO_LOOKUP 1 /* DNS lookup requested */
@@ -918,8 +919,11 @@ extern int afs_cell_init(struct afs_net *, const char *);
extern struct afs_cell *afs_find_cell(struct afs_net *, const char *, unsigned);
extern struct afs_cell *afs_lookup_cell(struct afs_net *, const char *, unsigned,
const char *, bool);
+extern struct afs_cell *afs_use_cell(struct afs_cell *);
+extern void afs_unuse_cell(struct afs_net *, struct afs_cell *);
extern struct afs_cell *afs_get_cell(struct afs_cell *);
-extern void afs_put_cell(struct afs_net *, struct afs_cell *);
+extern void afs_put_cell(struct afs_cell *);
+extern void afs_queue_cell(struct afs_cell *);
extern void afs_manage_cells(struct work_struct *);
extern void afs_cells_timer(struct timer_list *);
extern void __net_exit afs_cell_purge(struct afs_net *);
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 79bc5f1338edf..c69a0282960cc 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -88,7 +88,7 @@ static int afs_mntpt_set_params(struct fs_context *fc, struct dentry *mntpt)
ctx->force = true;
}
if (ctx->cell) {
- afs_put_cell(ctx->net, ctx->cell);
+ afs_unuse_cell(ctx->net, ctx->cell);
ctx->cell = NULL;
}
if (test_bit(AFS_VNODE_PSEUDODIR, &vnode->flags)) {
@@ -124,7 +124,7 @@ static int afs_mntpt_set_params(struct fs_context *fc, struct dentry *mntpt)
char *buf;
if (src_as->cell)
- ctx->cell = afs_get_cell(src_as->cell);
+ ctx->cell = afs_use_cell(src_as->cell);
if (size < 2 || size > PAGE_SIZE - 1)
return -EINVAL;
diff --git a/fs/afs/proc.c b/fs/afs/proc.c
index e817fc740ba01..855d7358933b4 100644
--- a/fs/afs/proc.c
+++ b/fs/afs/proc.c
@@ -38,7 +38,7 @@ static int afs_proc_cells_show(struct seq_file *m, void *v)
if (v == SEQ_START_TOKEN) {
/* display header on line 1 */
- seq_puts(m, "USE TTL SV ST NAME\n");
+ seq_puts(m, "USE ACT TTL SV ST NAME\n");
return 0;
}
@@ -46,10 +46,11 @@ static int afs_proc_cells_show(struct seq_file *m, void *v)
vllist = rcu_dereference(cell->vl_servers);
/* display one cell per line on subsequent lines */
- seq_printf(m, "%3u %6lld %2u %2u %s\n",
- atomic_read(&cell->usage),
+ seq_printf(m, "%3u %3u %6lld %2u %2u %s\n",
+ atomic_read(&cell->ref),
+ atomic_read(&cell->active),
cell->dns_expiry - ktime_get_real_seconds(),
- vllist->nr_servers,
+ vllist ? vllist->nr_servers : 0,
cell->state,
cell->name);
return 0;
@@ -128,7 +129,7 @@ static int afs_proc_cells_write(struct file *file, char *buf, size_t size)
}
if (test_and_set_bit(AFS_CELL_FL_NO_GC, &cell->flags))
- afs_put_cell(net, cell);
+ afs_unuse_cell(net, cell);
} else {
goto inval;
}
@@ -154,13 +155,11 @@ static int afs_proc_rootcell_show(struct seq_file *m, void *v)
struct afs_net *net;
net = afs_seq2net_single(m);
- if (rcu_access_pointer(net->ws_cell)) {
- rcu_read_lock();
- cell = rcu_dereference(net->ws_cell);
- if (cell)
- seq_printf(m, "%s\n", cell->name);
- rcu_read_unlock();
- }
+ down_read(&net->cells_lock);
+ cell = net->ws_cell;
+ if (cell)
+ seq_printf(m, "%s\n", cell->name);
+ up_read(&net->cells_lock);
return 0;
}
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 0be99016ecfb9..e72c223f831d2 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -294,7 +294,7 @@ static int afs_parse_source(struct fs_context *fc, struct fs_parameter *param)
cellnamesz, cellnamesz, cellname ?: "");
return PTR_ERR(cell);
}
- afs_put_cell(ctx->net, ctx->cell);
+ afs_unuse_cell(ctx->net, ctx->cell);
ctx->cell = cell;
}
@@ -389,8 +389,8 @@ static int afs_validate_fc(struct fs_context *fc)
_debug("switch to alias");
key_put(ctx->key);
ctx->key = NULL;
- cell = afs_get_cell(ctx->cell->alias_of);
- afs_put_cell(ctx->net, ctx->cell);
+ cell = afs_use_cell(ctx->cell->alias_of);
+ afs_unuse_cell(ctx->net, ctx->cell);
ctx->cell = cell;
goto reget_key;
}
@@ -508,7 +508,7 @@ static struct afs_super_info *afs_alloc_sbi(struct fs_context *fc)
if (ctx->dyn_root) {
as->dyn_root = true;
} else {
- as->cell = afs_get_cell(ctx->cell);
+ as->cell = afs_use_cell(ctx->cell);
as->volume = afs_get_volume(ctx->volume,
afs_volume_trace_get_alloc_sbi);
}
@@ -521,7 +521,7 @@ static void afs_destroy_sbi(struct afs_super_info *as)
if (as) {
struct afs_net *net = afs_net(as->net_ns);
afs_put_volume(net, as->volume, afs_volume_trace_put_destroy_sbi);
- afs_put_cell(net, as->cell);
+ afs_unuse_cell(net, as->cell);
put_net(as->net_ns);
kfree(as);
}
@@ -607,7 +607,7 @@ static void afs_free_fc(struct fs_context *fc)
afs_destroy_sbi(fc->s_fs_info);
afs_put_volume(ctx->net, ctx->volume, afs_volume_trace_put_free_fc);
- afs_put_cell(ctx->net, ctx->cell);
+ afs_unuse_cell(ctx->net, ctx->cell);
key_put(ctx->key);
kfree(ctx);
}
diff --git a/fs/afs/vl_alias.c b/fs/afs/vl_alias.c
index 5082ef04e99c5..ddb4cb67d0fd9 100644
--- a/fs/afs/vl_alias.c
+++ b/fs/afs/vl_alias.c
@@ -177,7 +177,7 @@ static int afs_compare_cell_roots(struct afs_cell *cell)
is_alias:
rcu_read_unlock();
- cell->alias_of = afs_get_cell(p);
+ cell->alias_of = afs_use_cell(p);
return 1;
}
@@ -247,18 +247,18 @@ static int afs_query_for_alias(struct afs_cell *cell, struct key *key)
continue;
if (p->root_volume)
continue; /* Ignore cells that have a root.cell volume. */
- afs_get_cell(p);
+ afs_use_cell(p);
mutex_unlock(&cell->net->proc_cells_lock);
if (afs_query_for_alias_one(cell, key, p) != 0)
goto is_alias;
if (mutex_lock_interruptible(&cell->net->proc_cells_lock) < 0) {
- afs_put_cell(cell->net, p);
+ afs_unuse_cell(cell->net, p);
return -ERESTARTSYS;
}
- afs_put_cell(cell->net, p);
+ afs_unuse_cell(cell->net, p);
}
mutex_unlock(&cell->net->proc_cells_lock);
diff --git a/fs/afs/vl_rotate.c b/fs/afs/vl_rotate.c
index f405ca8b240a5..750bd1579f212 100644
--- a/fs/afs/vl_rotate.c
+++ b/fs/afs/vl_rotate.c
@@ -45,7 +45,7 @@ static bool afs_start_vl_iteration(struct afs_vl_cursor *vc)
cell->dns_expiry <= ktime_get_real_seconds()) {
dns_lookup_count = smp_load_acquire(&cell->dns_lookup_count);
set_bit(AFS_CELL_FL_DO_LOOKUP, &cell->flags);
- queue_work(afs_wq, &cell->manager);
+ afs_queue_cell(cell);
if (cell->dns_source == DNS_RECORD_UNAVAILABLE) {
if (wait_var_event_interruptible(
diff --git a/fs/afs/volume.c b/fs/afs/volume.c
index 9bc0509e3634c..a838030e95634 100644
--- a/fs/afs/volume.c
+++ b/fs/afs/volume.c
@@ -106,7 +106,7 @@ static struct afs_volume *afs_alloc_volume(struct afs_fs_context *params,
return volume;
error_1:
- afs_put_cell(params->net, volume->cell);
+ afs_put_cell(volume->cell);
kfree(volume);
error_0:
return ERR_PTR(ret);
@@ -228,7 +228,7 @@ static void afs_destroy_volume(struct afs_net *net, struct afs_volume *volume)
afs_remove_volume_from_cell(volume);
afs_put_serverlist(net, rcu_access_pointer(volume->servers));
- afs_put_cell(net, volume->cell);
+ afs_put_cell(volume->cell);
trace_afs_volume(volume->vid, atomic_read(&volume->usage),
afs_volume_trace_free);
kfree_rcu(volume, rcu);
--
2.25.1
From: David Howells <[email protected]>
[ Upstream commit 92e3cc91d8f51ce64a8b7c696377180953dd316e ]
There are a number of problems that are being seen by the rapidly mounting
and unmounting an afs dynamic root with an explicit cell and volume
specified (which should probably be rejected, but that's a separate issue):
What the tests are doing is to look up/create a cell record for the name
given and then tear it down again without actually using it to try to talk
to a server. This is repeated endlessly, very fast, and the new cell
collides with the old one if it's not quick enough to reuse it.
It appears (as suggested by Hillf Danton) that the search through the RB
tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and
that it's not blocking the write_seqlock(), despite taking two passes at
it. He suggested that the code should take a ref on the cell it's
attempting to look at - but this shouldn't be necessary until we've
compared the cell names. It's possible that I'm missing a barrier
somewhere.
However, using an RCU search for this is overkill, really - we only need to
access the cell name in a few places, and they're places where we're may
end up sleeping anyway.
Fix this by switching to an R/W semaphore instead.
Additionally, draw the down_read() call inside the function (renamed to
afs_find_cell()) since all the callers were taking the RCU read lock (or
should've been[*]).
[*] afs_probe_cell_name() should have been, but that doesn't appear to be
involved in the bug reports.
The symptoms of this look like:
general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN
KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf]
...
RIP: 0010:strncasecmp lib/string.c:52 [inline]
RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43
afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88
afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249
afs_parse_source fs/afs/super.c:290 [inline]
...
Fixes: 989782dcdc91 ("afs: Overhaul cell database management")
Reported-by: [email protected]
Signed-off-by: David Howells <[email protected]>
cc: Hillf Danton <[email protected]>
cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/cell.c | 131 ++++++++++++++++++++--------------------------
fs/afs/dynroot.c | 21 +++-----
fs/afs/internal.h | 6 +--
fs/afs/main.c | 2 +-
fs/afs/super.c | 4 +-
5 files changed, 71 insertions(+), 93 deletions(-)
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index 5b79cdceefa0f..5da83e84952a2 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -41,15 +41,15 @@ static void afs_set_cell_timer(struct afs_net *net, time64_t delay)
}
/*
- * Look up and get an activation reference on a cell record under RCU
- * conditions. The caller must hold the RCU read lock.
+ * Look up and get an activation reference on a cell record. The caller must
+ * hold net->cells_lock at least read-locked.
*/
-struct afs_cell *afs_lookup_cell_rcu(struct afs_net *net,
- const char *name, unsigned int namesz)
+static struct afs_cell *afs_find_cell_locked(struct afs_net *net,
+ const char *name, unsigned int namesz)
{
struct afs_cell *cell = NULL;
struct rb_node *p;
- int n, seq = 0, ret = 0;
+ int n;
_enter("%*.*s", namesz, namesz, name);
@@ -58,61 +58,48 @@ struct afs_cell *afs_lookup_cell_rcu(struct afs_net *net,
if (namesz > AFS_MAXCELLNAME)
return ERR_PTR(-ENAMETOOLONG);
- do {
- /* Unfortunately, rbtree walking doesn't give reliable results
- * under just the RCU read lock, so we have to check for
- * changes.
- */
- if (cell)
- afs_put_cell(net, cell);
- cell = NULL;
- ret = -ENOENT;
-
- read_seqbegin_or_lock(&net->cells_lock, &seq);
-
- if (!name) {
- cell = rcu_dereference_raw(net->ws_cell);
- if (cell) {
- afs_get_cell(cell);
- ret = 0;
- break;
- }
- ret = -EDESTADDRREQ;
- continue;
- }
+ if (!name) {
+ cell = net->ws_cell;
+ if (!cell)
+ return ERR_PTR(-EDESTADDRREQ);
+ afs_get_cell(cell);
+ return cell;
+ }
- p = rcu_dereference_raw(net->cells.rb_node);
- while (p) {
- cell = rb_entry(p, struct afs_cell, net_node);
-
- n = strncasecmp(cell->name, name,
- min_t(size_t, cell->name_len, namesz));
- if (n == 0)
- n = cell->name_len - namesz;
- if (n < 0) {
- p = rcu_dereference_raw(p->rb_left);
- } else if (n > 0) {
- p = rcu_dereference_raw(p->rb_right);
- } else {
- if (atomic_inc_not_zero(&cell->usage)) {
- ret = 0;
- break;
- }
- /* We want to repeat the search, this time with
- * the lock properly locked.
- */
- }
- cell = NULL;
- }
+ p = net->cells.rb_node;
+ while (p) {
+ cell = rb_entry(p, struct afs_cell, net_node);
- } while (need_seqretry(&net->cells_lock, seq));
+ n = strncasecmp(cell->name, name,
+ min_t(size_t, cell->name_len, namesz));
+ if (n == 0)
+ n = cell->name_len - namesz;
+ if (n < 0)
+ p = p->rb_left;
+ else if (n > 0)
+ p = p->rb_right;
+ else
+ goto found;
+ }
+
+ return ERR_PTR(-ENOENT);
- done_seqretry(&net->cells_lock, seq);
+found:
+ if (!atomic_inc_not_zero(&cell->usage))
+ return ERR_PTR(-ENOENT);
- if (ret != 0 && cell)
- afs_put_cell(net, cell);
+ return cell;
+}
- return ret == 0 ? cell : ERR_PTR(ret);
+struct afs_cell *afs_find_cell(struct afs_net *net,
+ const char *name, unsigned int namesz)
+{
+ struct afs_cell *cell;
+
+ down_read(&net->cells_lock);
+ cell = afs_find_cell_locked(net, name, namesz);
+ up_read(&net->cells_lock);
+ return cell;
}
/*
@@ -245,9 +232,7 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
_enter("%s,%s", name, vllist);
if (!excl) {
- rcu_read_lock();
- cell = afs_lookup_cell_rcu(net, name, namesz);
- rcu_read_unlock();
+ cell = afs_find_cell(net, name, namesz);
if (!IS_ERR(cell))
goto wait_for_cell;
}
@@ -268,7 +253,7 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
/* Find the insertion point and check to see if someone else added a
* cell whilst we were allocating.
*/
- write_seqlock(&net->cells_lock);
+ down_write(&net->cells_lock);
pp = &net->cells.rb_node;
parent = NULL;
@@ -293,7 +278,7 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
rb_link_node_rcu(&cell->net_node, parent, pp);
rb_insert_color(&cell->net_node, &net->cells);
atomic_inc(&net->cells_outstanding);
- write_sequnlock(&net->cells_lock);
+ up_write(&net->cells_lock);
queue_work(afs_wq, &cell->manager);
@@ -323,7 +308,7 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
afs_get_cell(cursor);
ret = 0;
}
- write_sequnlock(&net->cells_lock);
+ up_write(&net->cells_lock);
kfree(candidate);
if (ret == 0)
goto wait_for_cell;
@@ -377,10 +362,10 @@ int afs_cell_init(struct afs_net *net, const char *rootcell)
afs_get_cell(new_root);
/* install the new cell */
- write_seqlock(&net->cells_lock);
- old_root = rcu_access_pointer(net->ws_cell);
- rcu_assign_pointer(net->ws_cell, new_root);
- write_sequnlock(&net->cells_lock);
+ down_write(&net->cells_lock);
+ old_root = net->ws_cell;
+ net->ws_cell = new_root;
+ up_write(&net->cells_lock);
afs_put_cell(net, old_root);
_leave(" = 0");
@@ -674,12 +659,12 @@ static void afs_manage_cell(struct work_struct *work)
switch (cell->state) {
case AFS_CELL_INACTIVE:
case AFS_CELL_FAILED:
- write_seqlock(&net->cells_lock);
+ down_write(&net->cells_lock);
usage = 1;
deleted = atomic_try_cmpxchg_relaxed(&cell->usage, &usage, 0);
if (deleted)
rb_erase(&cell->net_node, &net->cells);
- write_sequnlock(&net->cells_lock);
+ up_write(&net->cells_lock);
if (deleted)
goto final_destruction;
if (cell->state == AFS_CELL_FAILED)
@@ -779,7 +764,7 @@ void afs_manage_cells(struct work_struct *work)
* lack of use and cells whose DNS results have expired and dispatch
* their managers.
*/
- read_seqlock_excl(&net->cells_lock);
+ down_read(&net->cells_lock);
for (cursor = rb_first(&net->cells); cursor; cursor = rb_next(cursor)) {
struct afs_cell *cell =
@@ -824,7 +809,7 @@ void afs_manage_cells(struct work_struct *work)
queue_work(afs_wq, &cell->manager);
}
- read_sequnlock_excl(&net->cells_lock);
+ up_read(&net->cells_lock);
/* Update the timer on the way out. We have to pass an increment on
* cells_outstanding in the namespace that we are in to the timer or
@@ -854,10 +839,10 @@ void afs_cell_purge(struct afs_net *net)
_enter("");
- write_seqlock(&net->cells_lock);
- ws = rcu_access_pointer(net->ws_cell);
- RCU_INIT_POINTER(net->ws_cell, NULL);
- write_sequnlock(&net->cells_lock);
+ down_write(&net->cells_lock);
+ ws = net->ws_cell;
+ net->ws_cell = NULL;
+ up_write(&net->cells_lock);
afs_put_cell(net, ws);
_debug("del timer");
diff --git a/fs/afs/dynroot.c b/fs/afs/dynroot.c
index 7b784af604fd9..5b8de4fee6cda 100644
--- a/fs/afs/dynroot.c
+++ b/fs/afs/dynroot.c
@@ -123,7 +123,7 @@ static int afs_probe_cell_name(struct dentry *dentry)
len--;
}
- cell = afs_lookup_cell_rcu(net, name, len);
+ cell = afs_find_cell(net, name, len);
if (!IS_ERR(cell)) {
afs_put_cell(net, cell);
return 0;
@@ -179,7 +179,6 @@ static struct dentry *afs_lookup_atcell(struct dentry *dentry)
struct afs_cell *cell;
struct afs_net *net = afs_d2net(dentry);
struct dentry *ret;
- unsigned int seq = 0;
char *name;
int len;
@@ -191,17 +190,13 @@ static struct dentry *afs_lookup_atcell(struct dentry *dentry)
if (!name)
goto out_p;
- rcu_read_lock();
- do {
- read_seqbegin_or_lock(&net->cells_lock, &seq);
- cell = rcu_dereference_raw(net->ws_cell);
- if (cell) {
- len = cell->name_len;
- memcpy(name, cell->name, len + 1);
- }
- } while (need_seqretry(&net->cells_lock, seq));
- done_seqretry(&net->cells_lock, seq);
- rcu_read_unlock();
+ down_read(&net->cells_lock);
+ cell = net->ws_cell;
+ if (cell) {
+ len = cell->name_len;
+ memcpy(name, cell->name, len + 1);
+ }
+ up_read(&net->cells_lock);
ret = ERR_PTR(-ENOENT);
if (!cell)
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index e1ebead2e505a..3c28292c0cc70 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -263,11 +263,11 @@ struct afs_net {
/* Cell database */
struct rb_root cells;
- struct afs_cell __rcu *ws_cell;
+ struct afs_cell *ws_cell;
struct work_struct cells_manager;
struct timer_list cells_timer;
atomic_t cells_outstanding;
- seqlock_t cells_lock;
+ struct rw_semaphore cells_lock;
struct mutex cells_alias_lock;
struct mutex proc_cells_lock;
@@ -915,7 +915,7 @@ static inline bool afs_cb_is_broken(unsigned int cb_break,
* cell.c
*/
extern int afs_cell_init(struct afs_net *, const char *);
-extern struct afs_cell *afs_lookup_cell_rcu(struct afs_net *, const char *, unsigned);
+extern struct afs_cell *afs_find_cell(struct afs_net *, const char *, unsigned);
extern struct afs_cell *afs_lookup_cell(struct afs_net *, const char *, unsigned,
const char *, bool);
extern struct afs_cell *afs_get_cell(struct afs_cell *);
diff --git a/fs/afs/main.c b/fs/afs/main.c
index 31b472f7c734c..accdd8970e7c0 100644
--- a/fs/afs/main.c
+++ b/fs/afs/main.c
@@ -78,7 +78,7 @@ static int __net_init afs_net_init(struct net *net_ns)
mutex_init(&net->socket_mutex);
net->cells = RB_ROOT;
- seqlock_init(&net->cells_lock);
+ init_rwsem(&net->cells_lock);
INIT_WORK(&net->cells_manager, afs_manage_cells);
timer_setup(&net->cells_timer, afs_cells_timer, 0);
diff --git a/fs/afs/super.c b/fs/afs/super.c
index b552357b1d137..0be99016ecfb9 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -634,9 +634,7 @@ static int afs_init_fs_context(struct fs_context *fc)
ctx->net = afs_net(fc->net_ns);
/* Default to the workstation cell. */
- rcu_read_lock();
- cell = afs_lookup_cell_rcu(ctx->net, NULL, 0);
- rcu_read_unlock();
+ cell = afs_find_cell(ctx->net, NULL, 0);
if (IS_ERR(cell))
cell = NULL;
ctx->cell = cell;
--
2.25.1
From: Jamie Iles <[email protected]>
[ Upstream commit ae284d87abade58c8db7760c808f311ef1ce693c ]
syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, unmounting an
f2fs filesystem could result in the following splat:
kobject: 'loop5' ((____ptrval____)): kobject_release, parent 0000000000000000 (delayed 250)
kobject: 'f2fs_xattr_entry-7:5' ((____ptrval____)): kobject_release, parent 0000000000000000 (delayed 750)
------------[ cut here ]------------
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98
WARNING: CPU: 0 PID: 699 at lib/debugobjects.c:485 debug_print_object+0x180/0x240
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 699 Comm: syz-executor.5 Tainted: G S 5.9.0-rc8+ #101
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x4d8
show_stack+0x34/0x48
dump_stack+0x174/0x1f8
panic+0x360/0x7a0
__warn+0x244/0x2ec
report_bug+0x240/0x398
bug_handler+0x50/0xc0
call_break_hook+0x160/0x1d8
brk_handler+0x30/0xc0
do_debug_exception+0x184/0x340
el1_dbg+0x48/0xb0
el1_sync_handler+0x170/0x1c8
el1_sync+0x80/0x100
debug_print_object+0x180/0x240
debug_check_no_obj_freed+0x200/0x430
slab_free_freelist_hook+0x190/0x210
kfree+0x13c/0x460
f2fs_put_super+0x624/0xa58
generic_shutdown_super+0x120/0x300
kill_block_super+0x94/0xf8
kill_f2fs_super+0x244/0x308
deactivate_locked_super+0x104/0x150
deactivate_super+0x118/0x148
cleanup_mnt+0x27c/0x3c0
__cleanup_mnt+0x28/0x38
task_work_run+0x10c/0x248
do_notify_resume+0x9d4/0x1188
work_pending+0x8/0x34c
Like the error handling for f2fs_register_sysfs(), we need to wait for
the kobject to be destroyed before returning to prevent a potential
use-after-free.
Fixes: bf9e697ecd42 ("f2fs: expose features to sysfs entry")
Cc: Jaegeuk Kim <[email protected]>
Cc: Chao Yu <[email protected]>
Signed-off-by: Jamie Iles <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/sysfs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index c5e32ceb94827..e186d3af61368 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -964,4 +964,5 @@ void f2fs_unregister_sysfs(struct f2fs_sb_info *sbi)
}
kobject_del(&sbi->s_kobj);
kobject_put(&sbi->s_kobj);
+ wait_for_completion(&sbi->s_kobj_unregister);
}
--
2.25.1
From: Yan Zhao <[email protected]>
[ Upstream commit 7ef32e52368f62a4e041a4f0abefb4fb64e7fd4a ]
Page pinning is used both to translate and pin device mappings for DMA
purpose, as well as to indicate to the IOMMU backend to limit the dirty
page scope to those pages that have been pinned, in the case of an IOMMU
backed device.
To support this, the vfio_pin_pages() interface limits itself to only
singleton groups such that the IOMMU backend can consider dirty page
scope only at the group level. Implement the same requirement for the
vfio_group_pin_pages() interface.
Fixes: 95fc87b44104 ("vfio: Selective dirty page tracking if IOMMU backed device pins pages")
Signed-off-by: Yan Zhao <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/vfio.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index 580099afeaffa..2a70e25cfe954 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -2050,6 +2050,9 @@ int vfio_group_pin_pages(struct vfio_group *group,
if (!group || !user_iova_pfn || !phys_pfn || !npage)
return -EINVAL;
+ if (group->dev_counter > 1)
+ return -EINVAL;
+
if (npage > VFIO_PIN_PAGES_MAX_ENTRIES)
return -E2BIG;
--
2.25.1
From: Matthew Rosato <[email protected]>
[ Upstream commit 08b6e22b850c28b6032da1e4d767a33116e23dfb ]
For s390 we can have VFs that are passed-through without the associated
PF. Firmware provides an emulation layer to allow these devices to
operate independently, but is missing emulation of the Memory Space
Enable bit. For these as well as linked VFs, set no_command_memory
which specifies these devices do not implement PCI_COMMAND_MEMORY.
Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <[email protected]>
Reviewed-by: Niklas Schnelle <[email protected]>
Reviewed-by: Pierre Morel <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/pci/pci_bus.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/s390/pci/pci_bus.c b/arch/s390/pci/pci_bus.c
index 5967f30141563..c93486a9989bc 100644
--- a/arch/s390/pci/pci_bus.c
+++ b/arch/s390/pci/pci_bus.c
@@ -197,9 +197,10 @@ void pcibios_bus_add_device(struct pci_dev *pdev)
* With pdev->no_vf_scan the common PCI probing code does not
* perform PF/VF linking.
*/
- if (zdev->vfn)
+ if (zdev->vfn) {
zpci_bus_setup_virtfn(zdev->zbus, pdev, zdev->vfn);
-
+ pdev->no_command_memory = 1;
+ }
}
static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
--
2.25.1
From: Dan Carpenter <[email protected]>
[ Upstream commit e69ee0cf655e8e0c4a80f4319e36019b74f17639 ]
We need to call of_node_put(node) on the error paths for this function.
Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20200908071841.GA294938@mwanda
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rpmsg/qcom_smd.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index 4abbeea782fa4..19903de6268db 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1338,7 +1338,7 @@ static int qcom_smd_parse_edge(struct device *dev,
ret = of_property_read_u32(node, key, &edge->edge_id);
if (ret) {
dev_err(dev, "edge missing %s property\n", key);
- return -EINVAL;
+ goto put_node;
}
edge->remote_pid = QCOM_SMEM_HOST_ANY;
@@ -1349,32 +1349,37 @@ static int qcom_smd_parse_edge(struct device *dev,
edge->mbox_client.knows_txdone = true;
edge->mbox_chan = mbox_request_channel(&edge->mbox_client, 0);
if (IS_ERR(edge->mbox_chan)) {
- if (PTR_ERR(edge->mbox_chan) != -ENODEV)
- return PTR_ERR(edge->mbox_chan);
+ if (PTR_ERR(edge->mbox_chan) != -ENODEV) {
+ ret = PTR_ERR(edge->mbox_chan);
+ goto put_node;
+ }
edge->mbox_chan = NULL;
syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
if (!syscon_np) {
dev_err(dev, "no qcom,ipc node\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto put_node;
}
edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
- if (IS_ERR(edge->ipc_regmap))
- return PTR_ERR(edge->ipc_regmap);
+ if (IS_ERR(edge->ipc_regmap)) {
+ ret = PTR_ERR(edge->ipc_regmap);
+ goto put_node;
+ }
key = "qcom,ipc";
ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset);
if (ret < 0) {
dev_err(dev, "no offset in %s\n", key);
- return -EINVAL;
+ goto put_node;
}
ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit);
if (ret < 0) {
dev_err(dev, "no bit in %s\n", key);
- return -EINVAL;
+ goto put_node;
}
}
@@ -1385,7 +1390,8 @@ static int qcom_smd_parse_edge(struct device *dev,
irq = irq_of_parse_and_map(node, 0);
if (irq < 0) {
dev_err(dev, "required smd interrupt missing\n");
- return -EINVAL;
+ ret = irq;
+ goto put_node;
}
ret = devm_request_irq(dev, irq,
@@ -1393,12 +1399,18 @@ static int qcom_smd_parse_edge(struct device *dev,
node->name, edge);
if (ret) {
dev_err(dev, "failed to request smd irq\n");
- return ret;
+ goto put_node;
}
edge->irq = irq;
return 0;
+
+put_node:
+ of_node_put(node);
+ edge->of_node = NULL;
+
+ return ret;
}
/*
--
2.25.1
From: Dirk Behme <[email protected]>
[ Upstream commit 5b9bacf28a973a6b16510493416baeefa2c06289 ]
The i2c-rcar driver utilizes the Generic Reset Controller kernel
feature, so select the RESET_CONTROLLER option when the I2C_RCAR
option is selected with a Gen3 SoC.
Fixes: 2b16fd63059ab9 ("i2c: rcar: handle RXDMA HW behaviour on Gen3")
Signed-off-by: Dirk Behme <[email protected]>
Signed-off-by: Andy Lowe <[email protected]>
[erosca: Add "if ARCH_RCAR_GEN3" per Wolfram's request]
Signed-off-by: Eugeniu Rosca <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 735bf31a3fdff..6546d6cf3c24c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1191,6 +1191,7 @@ config I2C_RCAR
tristate "Renesas R-Car I2C Controller"
depends on ARCH_RENESAS || COMPILE_TEST
select I2C_SLAVE
+ select RESET_CONTROLLER if ARCH_RCAR_GEN3
help
If you say yes to this option, support will be included for the
R-Car I2C controller.
--
2.25.1
From: Hou Zhiqiang <[email protected]>
[ Upstream commit 16270a92355722e387e9ca19627c5a4d7bae1354 ]
The current check will result in the multiple function device
fails to initialize. So fix the check by masking out the
multiple function bit.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0b24134f7888 ("PCI: dwc: Add validation that PCIe core is set to correct mode")
Signed-off-by: Hou Zhiqiang <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/dwc/pcie-designware-ep.c | 3 ++-
include/uapi/linux/pci_regs.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 5e5b8821bed8c..ce1c00ea5fdca 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -505,7 +505,8 @@ int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep)
u32 reg;
int i;
- hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE);
+ hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE) &
+ PCI_HEADER_TYPE_MASK;
if (hdr_type != PCI_HEADER_TYPE_NORMAL) {
dev_err(pci->dev,
"PCIe controller is not set to EP mode (hdr_type:0x%x)!\n",
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index f9701410d3b52..57a222014cd20 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -76,6 +76,7 @@
#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
#define PCI_HEADER_TYPE 0x0e /* 8 bits */
+#define PCI_HEADER_TYPE_MASK 0x7f
#define PCI_HEADER_TYPE_NORMAL 0
#define PCI_HEADER_TYPE_BRIDGE 1
#define PCI_HEADER_TYPE_CARDBUS 2
--
2.25.1
From: Pali Rohár <[email protected]>
[ Upstream commit b32c012e4b98f0126aa327be2d1f409963057643 ]
Include linux/gpio/consumer.h instead of linux/gpio.h, as is said in the
latter file.
This was reported by kernel test bot when compiling for s390.
drivers/pci/controller/pci-aardvark.c:350:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror,-Wimplicit-function-declaration]
drivers/pci/controller/pci-aardvark.c:1074:21: error: implicit declaration of function 'devm_gpiod_get_from_of_node' [-Werror,-Wimplicit-function-declaration]
drivers/pci/controller/pci-aardvark.c:1076:14: error: use of undeclared identifier 'GPIOD_OUT_LOW'
Link: https://lore.kernel.org/r/202006211118.LxtENQfl%[email protected]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 90ff291c24f09..8caa80b19cf86 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -9,7 +9,7 @@
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
--
2.25.1
From: Stefan Agner <[email protected]>
[ Upstream commit 2c4e80e06790cb49ad2603855d30c5aac2209c47 ]
On Amlogic Meson G12b platform, similar to fclk_div3, the fclk_div2
seems to be necessary for the system to operate correctly as well.
Typically, the clock also gets chosen by the eMMC peripheral. This
probably masked the problem so far. However, when booting from a SD
card the clock seems to get disabled which leads to a system freeze.
Let's mark this clock as critical, fixing boot from SD card on G12b
platforms.
Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Stefan Agner <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Tested-by: Anand Moon <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Link: https://lore.kernel.org/r/577e0129e8ee93972d92f13187ff4e4286182f67.1598629915.git.stefan@agner.ch
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/meson/g12a.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 30c15766ebb16..05d032be15c8f 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -298,6 +298,17 @@ static struct clk_regmap g12a_fclk_div2 = {
&g12a_fclk_div2_div.hw
},
.num_parents = 1,
+ /*
+ * Similar to fclk_div3, it seems that this clock is used by
+ * the resident firmware and is required by the platform to
+ * operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
},
};
--
2.25.1
From: Jerome Brunet <[email protected]>
[ Upstream commit cdabb1ffc7c2349b8930f752df1edcafc1d37cc1 ]
There are more differences than what we initially thought.
Let's keeps things clear and separate the axg and g12a regmap tables of the
audio clock controller.
Signed-off-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/meson/axg-audio.c | 135 ++++++++++++++++++++++++++++++++--
1 file changed, 127 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c
index 53715e36326c6..9918cb375de30 100644
--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
@@ -1209,13 +1209,132 @@ static struct clk_hw_onecell_data sm1_audio_hw_onecell_data = {
};
-/* Convenience table to populate regmap in .probe()
- * Note that this table is shared between both AXG and G12A,
- * with spdifout_b clocks being exclusive to G12A. Since those
- * clocks are not declared within the AXG onecell table, we do not
- * feel the need to have separate AXG/G12A regmap tables.
- */
+/* Convenience table to populate regmap in .probe(). */
static struct clk_regmap *const axg_clk_regmaps[] = {
+ &ddr_arb,
+ &pdm,
+ &tdmin_a,
+ &tdmin_b,
+ &tdmin_c,
+ &tdmin_lb,
+ &tdmout_a,
+ &tdmout_b,
+ &tdmout_c,
+ &frddr_a,
+ &frddr_b,
+ &frddr_c,
+ &toddr_a,
+ &toddr_b,
+ &toddr_c,
+ &loopback,
+ &spdifin,
+ &spdifout,
+ &resample,
+ &power_detect,
+ &mst_a_mclk_sel,
+ &mst_b_mclk_sel,
+ &mst_c_mclk_sel,
+ &mst_d_mclk_sel,
+ &mst_e_mclk_sel,
+ &mst_f_mclk_sel,
+ &mst_a_mclk_div,
+ &mst_b_mclk_div,
+ &mst_c_mclk_div,
+ &mst_d_mclk_div,
+ &mst_e_mclk_div,
+ &mst_f_mclk_div,
+ &mst_a_mclk,
+ &mst_b_mclk,
+ &mst_c_mclk,
+ &mst_d_mclk,
+ &mst_e_mclk,
+ &mst_f_mclk,
+ &spdifout_clk_sel,
+ &spdifout_clk_div,
+ &spdifout_clk,
+ &spdifin_clk_sel,
+ &spdifin_clk_div,
+ &spdifin_clk,
+ &pdm_dclk_sel,
+ &pdm_dclk_div,
+ &pdm_dclk,
+ &pdm_sysclk_sel,
+ &pdm_sysclk_div,
+ &pdm_sysclk,
+ &mst_a_sclk_pre_en,
+ &mst_b_sclk_pre_en,
+ &mst_c_sclk_pre_en,
+ &mst_d_sclk_pre_en,
+ &mst_e_sclk_pre_en,
+ &mst_f_sclk_pre_en,
+ &mst_a_sclk_div,
+ &mst_b_sclk_div,
+ &mst_c_sclk_div,
+ &mst_d_sclk_div,
+ &mst_e_sclk_div,
+ &mst_f_sclk_div,
+ &mst_a_sclk_post_en,
+ &mst_b_sclk_post_en,
+ &mst_c_sclk_post_en,
+ &mst_d_sclk_post_en,
+ &mst_e_sclk_post_en,
+ &mst_f_sclk_post_en,
+ &mst_a_sclk,
+ &mst_b_sclk,
+ &mst_c_sclk,
+ &mst_d_sclk,
+ &mst_e_sclk,
+ &mst_f_sclk,
+ &mst_a_lrclk_div,
+ &mst_b_lrclk_div,
+ &mst_c_lrclk_div,
+ &mst_d_lrclk_div,
+ &mst_e_lrclk_div,
+ &mst_f_lrclk_div,
+ &mst_a_lrclk,
+ &mst_b_lrclk,
+ &mst_c_lrclk,
+ &mst_d_lrclk,
+ &mst_e_lrclk,
+ &mst_f_lrclk,
+ &tdmin_a_sclk_sel,
+ &tdmin_b_sclk_sel,
+ &tdmin_c_sclk_sel,
+ &tdmin_lb_sclk_sel,
+ &tdmout_a_sclk_sel,
+ &tdmout_b_sclk_sel,
+ &tdmout_c_sclk_sel,
+ &tdmin_a_sclk_pre_en,
+ &tdmin_b_sclk_pre_en,
+ &tdmin_c_sclk_pre_en,
+ &tdmin_lb_sclk_pre_en,
+ &tdmout_a_sclk_pre_en,
+ &tdmout_b_sclk_pre_en,
+ &tdmout_c_sclk_pre_en,
+ &tdmin_a_sclk_post_en,
+ &tdmin_b_sclk_post_en,
+ &tdmin_c_sclk_post_en,
+ &tdmin_lb_sclk_post_en,
+ &tdmout_a_sclk_post_en,
+ &tdmout_b_sclk_post_en,
+ &tdmout_c_sclk_post_en,
+ &tdmin_a_sclk,
+ &tdmin_b_sclk,
+ &tdmin_c_sclk,
+ &tdmin_lb_sclk,
+ &tdmout_a_sclk,
+ &tdmout_b_sclk,
+ &tdmout_c_sclk,
+ &tdmin_a_lrclk,
+ &tdmin_b_lrclk,
+ &tdmin_c_lrclk,
+ &tdmin_lb_lrclk,
+ &tdmout_a_lrclk,
+ &tdmout_b_lrclk,
+ &tdmout_c_lrclk,
+};
+
+static struct clk_regmap *const g12a_clk_regmaps[] = {
&ddr_arb,
&pdm,
&tdmin_a,
@@ -1713,8 +1832,8 @@ static const struct audioclk_data axg_audioclk_data = {
};
static const struct audioclk_data g12a_audioclk_data = {
- .regmap_clks = axg_clk_regmaps,
- .regmap_clk_num = ARRAY_SIZE(axg_clk_regmaps),
+ .regmap_clks = g12a_clk_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps),
.hw_onecell_data = &g12a_audio_hw_onecell_data,
.reset_offset = AUDIO_SW_RESET,
.reset_num = 26,
--
2.25.1
From: Jing Xiangfeng <[email protected]>
[ Upstream commit 85094c05eeb47d195a74a25366a2db066f1c9d47 ]
rio_mport_add_riodev() misses to call put_device() when the device already
exists. Add the missed function call to fix it.
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Jing Xiangfeng <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Alexandre Bounine <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Madhuparna Bhowmik <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rapidio/devices/rio_mport_cdev.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index 438cbf994c57f..152946e033d17 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -1680,6 +1680,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
struct rio_dev *rdev;
struct rio_switch *rswitch = NULL;
struct rio_mport *mport;
+ struct device *dev;
size_t size;
u32 rval;
u32 swpinfo = 0;
@@ -1694,8 +1695,10 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
rmcd_debug(RDEV, "name:%s ct:0x%x did:0x%x hc:0x%x", dev_info.name,
dev_info.comptag, dev_info.destid, dev_info.hopcount);
- if (bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name)) {
+ dev = bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name);
+ if (dev) {
rmcd_debug(RDEV, "device %s already exists", dev_info.name);
+ put_device(dev);
return -EEXIST;
}
--
2.25.1
From: Oliver O'Halloran <[email protected]>
[ Upstream commit 996f9e0f93f16211945c8d5f18f296a88cb32f91 ]
The kselftests test running infrastructure expects tests to finish with an
exit code of 4 if the test decided it should be skipped. Currently
eeh-basic.sh exits with the number of devices that failed to recover, so if
four devices didn't recover we'll report a skip instead of a fail.
Fix this by checking if the return code is non-zero and report success
and failure by returning 0 or 1 respectively. For the cases where should
actually skip return 4.
Fixes: 85d86c8aa52e ("selftests/powerpc: Add basic EEH selftest")
Signed-off-by: Oliver O'Halloran <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/eeh/eeh-basic.sh | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/powerpc/eeh/eeh-basic.sh b/tools/testing/selftests/powerpc/eeh/eeh-basic.sh
index 8a8d0f456946c..0d783e1065c86 100755
--- a/tools/testing/selftests/powerpc/eeh/eeh-basic.sh
+++ b/tools/testing/selftests/powerpc/eeh/eeh-basic.sh
@@ -1,17 +1,19 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-only
+KSELFTESTS_SKIP=4
+
. ./eeh-functions.sh
if ! eeh_supported ; then
echo "EEH not supported on this system, skipping"
- exit 0;
+ exit $KSELFTESTS_SKIP;
fi
if [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_check" ] && \
[ ! -e "/sys/kernel/debug/powerpc/eeh_dev_break" ] ; then
echo "debugfs EEH testing files are missing. Is debugfs mounted?"
- exit 1;
+ exit $KSELFTESTS_SKIP;
fi
pre_lspci=`mktemp`
@@ -84,4 +86,5 @@ echo "$failed devices failed to recover ($dev_count tested)"
lspci | diff -u $pre_lspci -
rm -f $pre_lspci
-exit $failed
+test "$failed" == 0
+exit $?
--
2.25.1
From: Chris Packham <[email protected]>
[ Upstream commit f471b05f76e4b1b6ba07ebc7681920a5c5b97c5d ]
Ensure the OSF flag is cleared on the DS1388 when the clock is set.
Fixes: df11b323b16f ("rtc: ds1307: handle oscillator failure flags for ds1388 variant")
Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-ds1307.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 49702942bb086..70b198423deba 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -352,6 +352,10 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
regmap_update_bits(ds1307->regmap, DS1340_REG_FLAG,
DS1340_BIT_OSF, 0);
break;
+ case ds_1388:
+ regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
+ DS1388_BIT_OSF, 0);
+ break;
case mcp794xx:
/*
* these bits were cleared when preparing the date/time
--
2.25.1
From: Eric Biggers <[email protected]>
[ Upstream commit f6322f3f1212e005e7e6aa82ceb62be53030a64b ]
syzbot reported:
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 6860 Comm: syz-executor835 Not tainted 5.9.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:utf8_casefold+0x43/0x1b0 fs/unicode/utf8-core.c:107
[...]
Call Trace:
f2fs_init_casefolded_name fs/f2fs/dir.c:85 [inline]
__f2fs_setup_filename fs/f2fs/dir.c:118 [inline]
f2fs_prepare_lookup+0x3bf/0x640 fs/f2fs/dir.c:163
f2fs_lookup+0x10d/0x920 fs/f2fs/namei.c:494
__lookup_hash+0x115/0x240 fs/namei.c:1445
filename_create+0x14b/0x630 fs/namei.c:3467
user_path_create fs/namei.c:3524 [inline]
do_mkdirat+0x56/0x310 fs/namei.c:3664
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[...]
The problem is that an inode has F2FS_CASEFOLD_FL set, but the
filesystem doesn't have the casefold feature flag set, and therefore
super_block::s_encoding is NULL.
Fix this by making sanity_check_inode() reject inodes that have
F2FS_CASEFOLD_FL when the filesystem doesn't have the casefold feature.
Reported-by: [email protected]
Fixes: 2c2eb7a300cd ("f2fs: Support case-insensitive file name lookups")
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/inode.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 44582a4db513e..1e014535c2530 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -287,6 +287,13 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
return false;
}
+ if ((fi->i_flags & F2FS_CASEFOLD_FL) && !f2fs_sb_has_casefold(sbi)) {
+ set_sbi_flag(sbi, SBI_NEED_FSCK);
+ f2fs_warn(sbi, "%s: inode (ino=%lx) has casefold flag, but casefold feature is off",
+ __func__, inode->i_ino);
+ return false;
+ }
+
if (f2fs_has_extra_attr(inode) && f2fs_sb_has_compression(sbi) &&
fi->i_flags & F2FS_COMPR_FL &&
F2FS_FITS_IN_INODE(ri, fi->i_extra_isize,
--
2.25.1
From: Colin Ian King <[email protected]>
[ Upstream commit 8e71f694e0c819db39af2336f16eb9689f1ae53f ]
An incorrect sizeof is being used, struct rvt_ibport ** is not correct, it
should be struct rvt_ibport *. Note that since ** is the same size as
* this is not causing any issues. Improve this fix by using
sizeof(*rdi->ports) as this allows us to not even reference the type
of the pointer. Also remove line breaks as the entire statement can
fit on one line.
Link: https://lore.kernel.org/r/[email protected]
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: ff6acd69518e ("IB/rdmavt: Add device structure allocation")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Acked-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rdmavt/vt.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/infiniband/sw/rdmavt/vt.c b/drivers/infiniband/sw/rdmavt/vt.c
index f904bb34477ae..2d534c450f3c8 100644
--- a/drivers/infiniband/sw/rdmavt/vt.c
+++ b/drivers/infiniband/sw/rdmavt/vt.c
@@ -95,9 +95,7 @@ struct rvt_dev_info *rvt_alloc_device(size_t size, int nports)
if (!rdi)
return rdi;
- rdi->ports = kcalloc(nports,
- sizeof(struct rvt_ibport **),
- GFP_KERNEL);
+ rdi->ports = kcalloc(nports, sizeof(*rdi->ports), GFP_KERNEL);
if (!rdi->ports)
ib_dealloc_device(&rdi->ibdev);
--
2.25.1
From: Bob Pearson <[email protected]>
[ Upstream commit e7ec96fc7932f48a6d6cdd05bf82004a1a04285b ]
The changes referenced below replaced sbk_clone)_ by taking additional
references, passing the skb along and then freeing the skb. This
deleted the packets before they could be processed and additionally
passed bad data in each packet. Since pkt is stored in skb->cb
changing pkt->qp changed it for all the packets.
Replace skb_get() by sbk_clone() in rxe_rcv_mcast_pkt() for cases where
multiple QPs are receiving multicast packets on the same address.
Delete kfree_skb() because the packets need to live until they have been
processed by each QP. They are freed later.
Fixes: 86af61764151 ("IB/rxe: remove unnecessary skb_clone")
Fixes: fe896ceb5772 ("IB/rxe: replace refcount_inc with skb_get")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bob Pearson <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_recv.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_recv.c b/drivers/infiniband/sw/rxe/rxe_recv.c
index 46e111c218fd4..be6416a982c70 100644
--- a/drivers/infiniband/sw/rxe/rxe_recv.c
+++ b/drivers/infiniband/sw/rxe/rxe_recv.c
@@ -281,6 +281,8 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)
struct rxe_mc_elem *mce;
struct rxe_qp *qp;
union ib_gid dgid;
+ struct sk_buff *per_qp_skb;
+ struct rxe_pkt_info *per_qp_pkt;
int err;
if (skb->protocol == htons(ETH_P_IP))
@@ -309,21 +311,26 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)
if (err)
continue;
- /* if *not* the last qp in the list
- * increase the users of the skb then post to the next qp
+ /* for all but the last qp create a new clone of the
+ * skb and pass to the qp.
*/
if (mce->qp_list.next != &mcg->qp_list)
- skb_get(skb);
+ per_qp_skb = skb_clone(skb, GFP_ATOMIC);
+ else
+ per_qp_skb = skb;
- pkt->qp = qp;
+ per_qp_pkt = SKB_TO_PKT(per_qp_skb);
+ per_qp_pkt->qp = qp;
rxe_add_ref(qp);
- rxe_rcv_pkt(pkt, skb);
+ rxe_rcv_pkt(per_qp_pkt, per_qp_skb);
}
spin_unlock_bh(&mcg->mcg_lock);
rxe_drop_ref(mcg); /* drop ref from rxe_pool_get_key. */
+ return;
+
err1:
kfree_skb(skb);
}
--
2.25.1
From: Wenpeng Liang <[email protected]>
[ Upstream commit 99fcf82521d91468ee6115a3c253aa032dc63cbc ]
The rnr_retry returned to the user is not correct, it should be got from
another fields in QPC.
Fixes: bfe860351e31 ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wenpeng Liang <[email protected]>
Signed-off-by: Weihang Li <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index fdd9605c67630..a55a850a8b997 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -4795,7 +4795,9 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr,
qp_attr->retry_cnt = roce_get_field(context.byte_212_lsn,
V2_QPC_BYTE_212_RETRY_CNT_M,
V2_QPC_BYTE_212_RETRY_CNT_S);
- qp_attr->rnr_retry = le32_to_cpu(context.rq_rnr_timer);
+ qp_attr->rnr_retry = roce_get_field(context.byte_244_rnr_rxack,
+ V2_QPC_BYTE_244_RNR_CNT_M,
+ V2_QPC_BYTE_244_RNR_CNT_S);
done:
qp_attr->cur_qp_state = qp_attr->qp_state;
--
2.25.1
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 0ec52f0194638e2d284ad55eba5a7aff753de1b9 ]
set_reg_wr() always fails if !umr_modify_entity_size_disabled because
mlx5_ib_can_use_umr() always fails. Without set_reg_wr() IB_WR_REG_MR
doesn't work and that means the device should not advertise
IB_DEVICE_MEM_MGT_EXTENSIONS.
Fixes: 841b07f99a47 ("IB/mlx5: Block MR WR if UMR is not possible")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 6f99ed03d88e7..1f4aa2647a6f3 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -867,7 +867,9 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
/* We support 'Gappy' memory registration too */
props->device_cap_flags |= IB_DEVICE_SG_GAPS_REG;
}
- props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
+ /* IB_WR_REG_MR always requires changing the entity size with UMR */
+ if (!MLX5_CAP_GEN(dev->mdev, umr_modify_entity_size_disabled))
+ props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
if (MLX5_CAP_GEN(mdev, sho)) {
props->device_cap_flags |= IB_DEVICE_INTEGRITY_HANDOVER;
/* At this stage no support for signature handover */
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 558e4c36ec9f2722af4fe8ef84dc812bcdb5c43a ]
platform_get_irq() returns -ERRNO on error. In such case casting to u32
and comparing to 0 would pass the check.
Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mailbox/mtk-cmdq-mailbox.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index b24822ad8409c..9963bb9cd74fa 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -69,7 +69,7 @@ struct cmdq_task {
struct cmdq {
struct mbox_controller mbox;
void __iomem *base;
- u32 irq;
+ int irq;
u32 thread_nr;
u32 irq_mask;
struct cmdq_thread *thread;
@@ -466,10 +466,8 @@ static int cmdq_probe(struct platform_device *pdev)
}
cmdq->irq = platform_get_irq(pdev, 0);
- if (!cmdq->irq) {
- dev_err(dev, "failed to get irq\n");
- return -EINVAL;
- }
+ if (cmdq->irq < 0)
+ return cmdq->irq;
cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
--
2.25.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit f97769fde678e111a1b7b165b380d8a3dfe54f4e ]
logical address can be either assigned by the SLIMBus controller or the core.
Core uses IDA in cases where get_addr callback is not provided by the
controller.
Core already has this check while allocating IDR, however during absence
reporting this is not checked. This patch fixes this issue.
Fixes: 46a2bb5a7f7e ("slimbus: core: Add slim controllers support")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/slimbus/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c
index ae1e248a8fb8a..58b63ae0e75a6 100644
--- a/drivers/slimbus/core.c
+++ b/drivers/slimbus/core.c
@@ -326,8 +326,8 @@ void slim_report_absent(struct slim_device *sbdev)
mutex_lock(&ctrl->lock);
sbdev->is_laddr_valid = false;
mutex_unlock(&ctrl->lock);
-
- ida_simple_remove(&ctrl->laddr_ida, sbdev->laddr);
+ if (!ctrl->get_laddr)
+ ida_simple_remove(&ctrl->laddr_ida, sbdev->laddr);
slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_DOWN);
}
EXPORT_SYMBOL_GPL(slim_report_absent);
--
2.25.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 709ec3f7fc5773ac4aa6fb22c3f0ac8103c674db ]
In QMI new server notification we enable the NGD however during
delete server notification we do not disable the NGD.
This can lead to multiple instances of NGD being enabled, so make
sure that we disable NGD in delete server callback to fix this issue!
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/slimbus/qcom-ngd-ctrl.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index 743ee7b4e63f2..218aefc3531cd 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1277,9 +1277,13 @@ static void qcom_slim_ngd_qmi_del_server(struct qmi_handle *hdl,
{
struct qcom_slim_ngd_qmi *qmi =
container_of(hdl, struct qcom_slim_ngd_qmi, svc_event_hdl);
+ struct qcom_slim_ngd_ctrl *ctrl =
+ container_of(qmi, struct qcom_slim_ngd_ctrl, qmi);
qmi->svc_info.sq_node = 0;
qmi->svc_info.sq_port = 0;
+
+ qcom_slim_ngd_enable(ctrl, false);
}
static struct qmi_ops qcom_slim_ngd_qmi_svc_event_ops = {
--
2.25.1
From: Andreas Färber <[email protected]>
[ Upstream commit ecda9cda3338b594a1b82d62018c247132a39e57 ]
In case of rtw8822be, a probe failure after successful rtw_core_init()
has been observed to occasionally lead to an oops from rtw_load_firmware_cb():
[ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000
[ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 3.944042] pci 0001:01:00.0: supports D1 D2
[ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit]
[ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit]
[ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff]
[ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001)
[ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory
[ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region
[ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources
[ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12
[ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c
[ 4.058975] Mem abort info:
[ 4.058980] ESR = 0x96000004
[ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.070353] SET = 0, FnV = 0
[ 4.073487] EA = 0, S1PTW = 0
[ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console
[ 4.076723] Data abort info:
[ 4.086415] ISV = 0, ISS = 0x00000004
[ 4.087731] Freeing unused kernel memory: 1792K
[ 4.090391] CM = 0, WnR = 0
[ 4.098091] [edafeaac9607952c] address between user and kernel address ranges
[ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 4.111129] Modules linked in:
[ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700
[ 4.122386] Hardware name: Realtek Saola EVB (DT)
[ 4.127223] Workqueue: events request_firmware_work_func
[ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc
[ 4.143040] lr : request_firmware_work_func+0x44/0xb4
[ 4.148217] sp : ffff800010133d70
[ 4.151616] x29: ffff800010133d70 x28: 0000000000000000
[ 4.157069] x27: 0000000000000000 x26: 0000000000000000
[ 4.162520] x25: 0000000000000000 x24: 0000000000000000
[ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100
[ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504
[ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000
[ 4.184328] x17: 00000000000044d8 x16: 0000000000004310
[ 4.189780] x15: 0000000000000800 x14: 00000000ef006305
[ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff
[ 4.200682] x11: 0000000000000020 x10: 0000000000000003
[ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680
[ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588
[ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80
[ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718
[ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600
[ 4.233391] Call trace:
[ 4.235906] rtw_load_firmware_cb+0x54/0xbc
[ 4.240198] request_firmware_work_func+0x44/0xb4
[ 4.245027] process_one_work+0x178/0x1e4
[ 4.249142] worker_thread+0x1d0/0x268
[ 4.252989] kthread+0xe8/0xf8
[ 4.256127] ret_from_fork+0x10/0x18
[ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681)
[ 4.266049] ---[ end trace f822ebae1a8545c2 ]---
To avoid this, wait on the completion callbacks in rtw_core_deinit()
before releasing firmware and continuing teardown.
Note that rtw_wait_firmware_completion() was introduced with
c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware
if wowlan is supported"), so backports to earlier branches may need to
inline wait_for_completion(&rtwdev->fw.completion) instead.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")
Cc: Yan-Hsuan Chuang <[email protected]>
Signed-off-by: Andreas Färber <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 665d4bbdee6a0..80b880b671eaa 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1479,6 +1479,8 @@ void rtw_core_deinit(struct rtw_dev *rtwdev)
struct rtw_rsvd_page *rsvd_pkt, *tmp;
unsigned long flags;
+ rtw_wait_firmware_completion(rtwdev);
+
if (fw->firmware)
release_firmware(fw->firmware);
--
2.25.1
From: Thinh Nguyen <[email protected]>
[ Upstream commit b574ce3ee45937f4a01edc98c59213bfc7effe50 ]
If the maximum_speed is not specified, default the device speed base on
its HW capability. Don't prematurely check HW capability before
validating the maximum_speed device property. The device property takes
precedence in dwc->maximum_speed.
Fixes: 0e1e5c47f7a9 ("usb: dwc3: add support for USB 2.0-only core configuration")
Reported-by: Chunfeng Yun <[email protected]>
Signed-off-by: Thinh Nguyen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/core.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 25c686a752b0f..7c5a18f9f66c8 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -930,13 +930,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
*/
dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
- /* Handle USB2.0-only core configuration */
- if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
- if (dwc->maximum_speed == USB_SPEED_SUPER)
- dwc->maximum_speed = USB_SPEED_HIGH;
- }
-
ret = dwc3_phy_setup(dwc);
if (ret)
goto err0;
@@ -1382,6 +1375,8 @@ bool dwc3_has_imod(struct dwc3 *dwc)
static void dwc3_check_params(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
+ unsigned int hwparam_gen =
+ DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3);
/* Check for proper value of imod_interval */
if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
@@ -1413,17 +1408,23 @@ static void dwc3_check_params(struct dwc3 *dwc)
dwc->maximum_speed);
/* fall through */
case USB_SPEED_UNKNOWN:
- /* default to superspeed */
- dwc->maximum_speed = USB_SPEED_SUPER;
-
- /*
- * default to superspeed plus if we are capable.
- */
- if ((DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) &&
- (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ switch (hwparam_gen) {
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2:
dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
-
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1:
+ if (DWC3_IP_IS(DWC32))
+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+ else
+ dwc->maximum_speed = USB_SPEED_SUPER;
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_DIS:
+ dwc->maximum_speed = USB_SPEED_HIGH;
+ break;
+ default:
+ dwc->maximum_speed = USB_SPEED_SUPER;
+ break;
+ }
break;
}
}
--
2.25.1
From: Huang Guobin <[email protected]>
[ Upstream commit 55bd149978679742374c800e56e8f6bc74378bbe ]
The wilc_wfi_init_mon_int() forgets to clean up resource when
register_netdevice() failed. Add the missed call to fix it.
And the return value of netdev_priv can't be NULL, so remove
the unnecessary error handling.
Fixes: 588713006ea4 ("staging: wilc1000: avoid the use of 'wilc_wfi_mon' static variable")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Huang Guobin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/wilc1000/mon.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/wilc1000/mon.c b/drivers/staging/wilc1000/mon.c
index 60331417bd983..66f1c870f4f69 100644
--- a/drivers/staging/wilc1000/mon.c
+++ b/drivers/staging/wilc1000/mon.c
@@ -236,11 +236,10 @@ struct net_device *wilc_wfi_init_mon_interface(struct wilc *wl,
if (register_netdevice(wl->monitor_dev)) {
netdev_err(real_dev, "register_netdevice failed\n");
+ free_netdev(wl->monitor_dev);
return NULL;
}
priv = netdev_priv(wl->monitor_dev);
- if (!priv)
- return NULL;
priv->real_ndev = real_dev;
--
2.25.1
From: Luca Weiss <[email protected]>
[ Upstream commit 0a48db562c6264da2ae8013491efd6e8dc780520 ]
The function iommu_domain_alloc returns NULL on platforms without IOMMU
such as msm8974. This resulted in PTR_ERR(-ENODEV) being assigned to
gpu->aspace so the correct code path wasn't taken.
Fixes: ccac7ce373c1 ("drm/msm: Refactor address space initialization")
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Jordan Crouse <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index a74ccc5b8220d..5b5809c0e44b3 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -189,10 +189,16 @@ struct msm_gem_address_space *
adreno_iommu_create_address_space(struct msm_gpu *gpu,
struct platform_device *pdev)
{
- struct iommu_domain *iommu = iommu_domain_alloc(&platform_bus_type);
- struct msm_mmu *mmu = msm_iommu_new(&pdev->dev, iommu);
+ struct iommu_domain *iommu;
+ struct msm_mmu *mmu;
struct msm_gem_address_space *aspace;
+ iommu = iommu_domain_alloc(&platform_bus_type);
+ if (!iommu)
+ return NULL;
+
+ mmu = msm_iommu_new(&pdev->dev, iommu);
+
aspace = msm_gem_address_space_create(mmu, "gpu", SZ_16M,
0xffffffff - SZ_16M);
--
2.25.1
From: Moshe Tal <[email protected]>
[ Upstream commit 19f5b63bc9932d51292d72c9dc3ec95e5dfa2289 ]
Add variable initialization to eliminate the warning
"variable may be used uninitialized".
Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: Moshe Tal <[email protected]>
Reviewed-by: Aya Levin <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/health.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/health.c b/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
index 7283443868f3c..13c87ab50b267 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
@@ -212,8 +212,8 @@ static int mlx5e_health_rsc_fmsg_binary(struct devlink_fmsg *fmsg,
{
u32 data_size;
+ int err = 0;
u32 offset;
- int err;
for (offset = 0; offset < value_len; offset += data_size) {
data_size = value_len - offset;
--
2.25.1
From: Vadym Kochan <[email protected]>
[ Upstream commit b1c194dcdb1425fa59eec61ab927cfff33096149 ]
of_parse_phandle() returns device_node with incremented ref count
which needs to be decremented by of_node_put() when device_node
is not used.
Fixes: e2a5402ec7c6 ("nvmem: Add nvmem_device based consumer apis.")
Signed-off-by: Vadym Kochan <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvmem/core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 927eb5f6003f0..394e75dede725 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -823,6 +823,7 @@ struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *id)
{
struct device_node *nvmem_np;
+ struct nvmem_device *nvmem;
int index = 0;
if (id)
@@ -832,7 +833,9 @@ struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *id)
if (!nvmem_np)
return ERR_PTR(-ENOENT);
- return __nvmem_device_get(nvmem_np, device_match_of_node);
+ nvmem = __nvmem_device_get(nvmem_np, device_match_of_node);
+ of_node_put(nvmem_np);
+ return nvmem;
}
EXPORT_SYMBOL_GPL(of_nvmem_device_get);
#endif
--
2.25.1
From: Thomas Preston <[email protected]>
[ Upstream commit b445f6237744df5e8d4f56f8733b2108c611220a ]
The mcp23x17_regmap is initialised with structs named "mcp23x16".
However, the mcp23s08 driver doesn't support the MCP23016 device yet, so
this appears to be a typo.
Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching")
Signed-off-by: Thomas Preston <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-mcp23s08.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 151931b593f6e..5641df67bcf55 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -87,7 +87,7 @@ const struct regmap_config mcp23x08_regmap = {
};
EXPORT_SYMBOL_GPL(mcp23x08_regmap);
-static const struct reg_default mcp23x16_defaults[] = {
+static const struct reg_default mcp23x17_defaults[] = {
{.reg = MCP_IODIR << 1, .def = 0xffff},
{.reg = MCP_IPOL << 1, .def = 0x0000},
{.reg = MCP_GPINTEN << 1, .def = 0x0000},
@@ -98,23 +98,23 @@ static const struct reg_default mcp23x16_defaults[] = {
{.reg = MCP_OLAT << 1, .def = 0x0000},
};
-static const struct regmap_range mcp23x16_volatile_range = {
+static const struct regmap_range mcp23x17_volatile_range = {
.range_min = MCP_INTF << 1,
.range_max = MCP_GPIO << 1,
};
-static const struct regmap_access_table mcp23x16_volatile_table = {
- .yes_ranges = &mcp23x16_volatile_range,
+static const struct regmap_access_table mcp23x17_volatile_table = {
+ .yes_ranges = &mcp23x17_volatile_range,
.n_yes_ranges = 1,
};
-static const struct regmap_range mcp23x16_precious_range = {
+static const struct regmap_range mcp23x17_precious_range = {
.range_min = MCP_GPIO << 1,
.range_max = MCP_GPIO << 1,
};
-static const struct regmap_access_table mcp23x16_precious_table = {
- .yes_ranges = &mcp23x16_precious_range,
+static const struct regmap_access_table mcp23x17_precious_table = {
+ .yes_ranges = &mcp23x17_precious_range,
.n_yes_ranges = 1,
};
@@ -124,10 +124,10 @@ const struct regmap_config mcp23x17_regmap = {
.reg_stride = 2,
.max_register = MCP_OLAT << 1,
- .volatile_table = &mcp23x16_volatile_table,
- .precious_table = &mcp23x16_precious_table,
- .reg_defaults = mcp23x16_defaults,
- .num_reg_defaults = ARRAY_SIZE(mcp23x16_defaults),
+ .volatile_table = &mcp23x17_volatile_table,
+ .precious_table = &mcp23x17_precious_table,
+ .reg_defaults = mcp23x17_defaults,
+ .num_reg_defaults = ARRAY_SIZE(mcp23x17_defaults),
.cache_type = REGCACHE_FLAT,
.val_format_endian = REGMAP_ENDIAN_LITTLE,
};
--
2.25.1
From: Abhishek Pandit-Subedi <[email protected]>
[ Upstream commit 3eec158d5eca7dd455118d9e00568aad2371219f ]
Unregister_pm_notifier is a blocking call so suspend tasks should be
cleared beforehand. Otherwise, the notifier will wait for completion
before returning (and we encounter a 2s timeout on resume).
Fixes: 0e9952804ec9c8 (Bluetooth: Clear suspend tasks on unregister)
Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 0f4e5a31f983c..131d29e902a30 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3618,8 +3618,8 @@ void hci_unregister_dev(struct hci_dev *hdev)
cancel_work_sync(&hdev->power_on);
- unregister_pm_notifier(&hdev->suspend_notifier);
hci_suspend_clear_tasks(hdev);
+ unregister_pm_notifier(&hdev->suspend_notifier);
cancel_work_sync(&hdev->suspend_prepare);
hci_dev_do_close(hdev);
--
2.25.1
From: Tingwei Zhang <[email protected]>
[ Upstream commit 6e8836c6df5327bdb24211424f1ad1411d1ed64a ]
Below BUG is triggered by call pm_runtime_get_sync() in
cti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt
disabled. Pm_runtime_get_sync() calls clock driver to enable clock
which could sleep. Remove pm_runtime_get_sync() in cti_cpuhp_enable_hw()
since pm_runtime_get_sync() is called in cti_enabld and pm_runtime_put()
is called in cti_disabled. No need to increase pm count when CPU gets
online since it's not decreased when CPU is offline.
[ 105.800279] BUG: scheduling while atomic: swapper/1/0/0x00000002
[ 105.800290] Modules linked in:
[ 105.800327] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W
5.9.0-rc1-gff1304be0a05-dirty #21
[ 105.800337] Hardware name: Thundercomm Dragonboard 845c (DT)
[ 105.800353] Call trace:
[ 105.800414] dump_backtrace+0x0/0x1d4
[ 105.800439] show_stack+0x14/0x1c
[ 105.800462] dump_stack+0xc0/0x100
[ 105.800490] __schedule_bug+0x58/0x74
[ 105.800523] __schedule+0x590/0x65c
[ 105.800538] schedule+0x78/0x10c
[ 105.800553] schedule_timeout+0x188/0x250
[ 105.800585] qmp_send.constprop.10+0x12c/0x1b0
[ 105.800599] qmp_qdss_clk_prepare+0x18/0x20
[ 105.800622] clk_core_prepare+0x48/0xd4
[ 105.800639] clk_prepare+0x20/0x34
[ 105.800663] amba_pm_runtime_resume+0x54/0x90
[ 105.800695] __rpm_callback+0xdc/0x138
[ 105.800709] rpm_callback+0x24/0x78
[ 105.800724] rpm_resume+0x328/0x47c
[ 105.800739] __pm_runtime_resume+0x50/0x74
[ 105.800768] cti_starting_cpu+0x40/0xa4
[ 105.800795] cpuhp_invoke_callback+0x84/0x1e0
[ 105.800814] notify_cpu_starting+0x9c/0xb8
[ 105.800834] secondary_start_kernel+0xd8/0x164
[ 105.800933] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
Fixes: e9b880581d55 ("coresight: cti: Add CPU Hotplug handling to CTI driver")
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: Tingwei Zhang <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-cti.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c
index d6fea6efec71f..c4e9cc7034ab7 100644
--- a/drivers/hwtracing/coresight/coresight-cti.c
+++ b/drivers/hwtracing/coresight/coresight-cti.c
@@ -141,9 +141,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)
static void cti_cpuhp_enable_hw(struct cti_drvdata *drvdata)
{
struct cti_config *config = &drvdata->config;
- struct device *dev = &drvdata->csdev->dev;
- pm_runtime_get_sync(dev->parent);
spin_lock(&drvdata->spinlock);
config->hw_powered = true;
@@ -163,7 +161,6 @@ static void cti_cpuhp_enable_hw(struct cti_drvdata *drvdata)
/* did not re-enable due to no claim / no request */
cti_hp_not_enabled:
spin_unlock(&drvdata->spinlock);
- pm_runtime_put(dev->parent);
}
/* disable hardware */
--
2.25.1
From: Ilya Leoshkevich <[email protected]>
[ Upstream commit b6ed6cf4a3acdeab9aed8e0a524850761ec9b152 ]
server_map's value size is 8, but the test tries to put an int there.
This sort of works on x86 (unless followed by non-0), but hard fails on
s390.
Fix by using __s64 instead of int.
Fixes: 2d7824ffd25c ("selftests: bpf: Add test for sk_assign")
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/sk_assign.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/sk_assign.c b/tools/testing/selftests/bpf/prog_tests/sk_assign.c
index 47fa04adc1471..21c2d265c3e8e 100644
--- a/tools/testing/selftests/bpf/prog_tests/sk_assign.c
+++ b/tools/testing/selftests/bpf/prog_tests/sk_assign.c
@@ -265,7 +265,7 @@ void test_sk_assign(void)
TEST("ipv6 udp port redir", AF_INET6, SOCK_DGRAM, false),
TEST("ipv6 udp addr redir", AF_INET6, SOCK_DGRAM, true),
};
- int server = -1;
+ __s64 server = -1;
int server_map;
int self_net;
--
2.25.1
From: Tingwei Zhang <[email protected]>
[ Upstream commit 0dee28268ddbe53a981d4d87faf5dc0f1700e698 ]
Coresight_claim_device() is called in cti_starting_cpu() only
when CTI is enabled while coresight_disclaim_device() is called
uncontionally in cti_dying_cpu(). This triggered below WARNING.
Only call disclaim device when CTI device is enabled to fix it.
[ 75.989643] WARNING: CPU: 1 PID: 14 at
kernel/drivers/hwtracing/coresight/coresight.c:209
coresight_disclaim_device_unlocked+0x10/0x24
[ 75.989697] CPU: 1 PID: 14 Comm: migration/1 Not tainted
5.9.0-rc1-gff1304be0a05-dirty #21
[ 75.989709] Hardware name: Thundercomm Dragonboard 845c (DT)
[ 75.989737] pstate: 80c00085 (Nzcv daIf +PAN +UAO BTYPE=--)
[ 75.989758] pc : coresight_disclaim_device_unlocked+0x10/0x24
[ 75.989775] lr : coresight_disclaim_device+0x24/0x38
[ 75.989783] sp : ffff800011cd3c90
.
[ 75.990018] Call trace:
[ 75.990041] coresight_disclaim_device_unlocked+0x10/0x24
[ 75.990066] cti_dying_cpu+0x34/0x4c
[ 75.990101] cpuhp_invoke_callback+0x84/0x1e0
[ 75.990121] take_cpu_down+0x90/0xe0
[ 75.990154] multi_cpu_stop+0x134/0x160
[ 75.990171] cpu_stopper_thread+0xb0/0x13c
[ 75.990196] smpboot_thread_fn+0x1c4/0x270
[ 75.990222] kthread+0x128/0x154
[ 75.990251] ret_from_fork+0x10/0x18
Fixes: e9b880581d55 ("coresight: cti: Add CPU Hotplug handling to CTI driver")
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: Tingwei Zhang <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-cti.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c
index 3ccc703dc9409..d6fea6efec71f 100644
--- a/drivers/hwtracing/coresight/coresight-cti.c
+++ b/drivers/hwtracing/coresight/coresight-cti.c
@@ -742,7 +742,8 @@ static int cti_dying_cpu(unsigned int cpu)
spin_lock(&drvdata->spinlock);
drvdata->config.hw_powered = false;
- coresight_disclaim_device(drvdata->base);
+ if (drvdata->config.hw_enabled)
+ coresight_disclaim_device(drvdata->base);
spin_unlock(&drvdata->spinlock);
return 0;
}
--
2.25.1
From: Pali Rohár <[email protected]>
[ Upstream commit c942d1542f1bc5001216fabce9cb8ffbe515777e ]
CONFIG_ARM_ARMADA_37XX_CPUFREQ is tristate option and therefore this
cpufreq driver can be compiled as a module. This patch adds missing
MODULE_DEVICE_TABLE which generates correct modalias for automatic
loading of this cpufreq driver when is compiled as an external module.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 92ce45fb875d7 ("cpufreq: Add DVFS support for Armada 37xx")
[ Viresh: Added __maybe_unused ]
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/armada-37xx-cpufreq.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index df1c941260d14..b4af4094309b0 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -484,6 +484,12 @@ static int __init armada37xx_cpufreq_driver_init(void)
/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
late_initcall(armada37xx_cpufreq_driver_init);
+static const struct of_device_id __maybe_unused armada37xx_cpufreq_of_match[] = {
+ { .compatible = "marvell,armada-3700-nb-pm" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, armada37xx_cpufreq_of_match);
+
MODULE_AUTHOR("Gregory CLEMENT <[email protected]>");
MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
MODULE_LICENSE("GPL");
--
2.25.1
From: Alex Dewar <[email protected]>
[ Upstream commit cc34073c6248e9cec801bf690d1455f264d12357 ]
In nbu2ss_eq_queue() memory is allocated with dma_alloc_coherent(),
though, strangely, NULL is passed as the struct device* argument. Pass
the UDC's device instead. Fix up the corresponding call to
dma_free_coherent() in the same way.
Build-tested on x86 only.
Fixes: 33aa8d45a4fe ("staging: emxx_udc: Add Emma Mobile USB Gadget driver")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Alex Dewar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/emxx_udc/emxx_udc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
index 03929b9d3a8bc..d0725bc8b48a4 100644
--- a/drivers/staging/emxx_udc/emxx_udc.c
+++ b/drivers/staging/emxx_udc/emxx_udc.c
@@ -2593,7 +2593,7 @@ static int nbu2ss_ep_queue(struct usb_ep *_ep,
if (req->unaligned) {
if (!ep->virt_buf)
- ep->virt_buf = dma_alloc_coherent(NULL, PAGE_SIZE,
+ ep->virt_buf = dma_alloc_coherent(udc->dev, PAGE_SIZE,
&ep->phys_buf,
GFP_ATOMIC | GFP_DMA);
if (ep->epnum > 0) {
@@ -3148,7 +3148,7 @@ static int nbu2ss_drv_remove(struct platform_device *pdev)
for (i = 0; i < NUM_ENDPOINTS; i++) {
ep = &udc->ep[i];
if (ep->virt_buf)
- dma_free_coherent(NULL, PAGE_SIZE, (void *)ep->virt_buf,
+ dma_free_coherent(udc->dev, PAGE_SIZE, (void *)ep->virt_buf,
ep->phys_buf);
}
--
2.25.1
From: KP Singh <[email protected]>
[ Upstream commit aa662fc04f5b290b3979332588bf8d812b189962 ]
ima_file_hash can be called when there is no iint->ima_hash available
even though the inode exists in the integrity cache. It is fairly
common for a file to not have a hash. (e.g. an mknodat, prior to the
file being closed).
Another example where this can happen (suggested by Jann Horn):
Process A does:
while(1) {
unlink("/tmp/imafoo");
fd = open("/tmp/imafoo", O_RDWR|O_CREAT|O_TRUNC, 0700);
if (fd == -1) {
perror("open");
continue;
}
write(fd, "A", 1);
close(fd);
}
and Process B does:
while (1) {
int fd = open("/tmp/imafoo", O_RDONLY);
if (fd == -1)
continue;
char *mapping = mmap(NULL, 0x1000, PROT_READ|PROT_EXEC,
MAP_PRIVATE, fd, 0);
if (mapping != MAP_FAILED)
munmap(mapping, 0x1000);
close(fd);
}
Due to the race to get the iint->mutex between ima_file_hash and
process_measurement iint->ima_hash could still be NULL.
Fixes: 6beea7afcc72 ("ima: add the ability to query the cached hash of a given file")
Signed-off-by: KP Singh <[email protected]>
Reviewed-by: Florent Revest <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/integrity/ima/ima_main.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index c1583d98c5e50..0b8f17570f210 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -531,6 +531,16 @@ int ima_file_hash(struct file *file, char *buf, size_t buf_size)
return -EOPNOTSUPP;
mutex_lock(&iint->mutex);
+
+ /*
+ * ima_file_hash can be called when ima_collect_measurement has still
+ * not been called, we might not always have a hash.
+ */
+ if (!iint->ima_hash) {
+ mutex_unlock(&iint->mutex);
+ return -EOPNOTSUPP;
+ }
+
if (buf) {
size_t copied_size;
--
2.25.1
From: Darrick J. Wong <[email protected]>
[ Upstream commit 5ffce3cc22a0e89813ed0c7162a68b639aef9ab6 ]
Commit 5833112df7e9 tried to make it so that a remap operation would
force the log out to disk if the filesystem is mounted with mandatory
synchronous writes. Unfortunately, that commit failed to handle the
case where the inode or the file descriptor require mandatory
synchronous writes.
Refactor the check into into a helper that will look for all three
conditions, and now we can treat reflink just like any other synchronous
write.
Fixes: 5833112df7e9 ("xfs: reflink should force the log out if mounted with wsync")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/xfs/xfs_file.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 4d7385426149c..3ebc73ccc1337 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -1005,6 +1005,21 @@ xfs_file_fadvise(
return ret;
}
+/* Does this file, inode, or mount want synchronous writes? */
+static inline bool xfs_file_sync_writes(struct file *filp)
+{
+ struct xfs_inode *ip = XFS_I(file_inode(filp));
+
+ if (ip->i_mount->m_flags & XFS_MOUNT_WSYNC)
+ return true;
+ if (filp->f_flags & (__O_SYNC | O_DSYNC))
+ return true;
+ if (IS_SYNC(file_inode(filp)))
+ return true;
+
+ return false;
+}
+
STATIC loff_t
xfs_file_remap_range(
struct file *file_in,
@@ -1062,7 +1077,7 @@ xfs_file_remap_range(
if (ret)
goto out_unlock;
- if (mp->m_flags & XFS_MOUNT_WSYNC)
+ if (xfs_file_sync_writes(file_in) || xfs_file_sync_writes(file_out))
xfs_log_force_inode(dest);
out_unlock:
xfs_reflink_remap_unlock(file_in, file_out);
--
2.25.1
From: Jin Yao <[email protected]>
[ Upstream commit 002a3d690f95804bdef6b70b26154103518e13d9 ]
Some metrics (such as DRAM_BW_Use) consists of uncore events and
duration_time. For uncore events, counter->core.system_wide is true. But
for duration_time, counter->core.system_wide is false so
target.system_wide is set to false.
Then 'enable_on_exec' is set in perf_event_attr of uncore event. Kernel
will return error when trying to open the uncore event.
This patch skips the duration_time in setup_system_wide then
target.system_wide will be set to true for the evlist of uncore events +
duration_time.
Before (tested on skylake desktop):
# perf stat -M DRAM_BW_Use -- sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (arb/event=0x84,umask=0x1/).
/bin/dmesg | grep -i perf may provide additional information.
After:
# perf stat -M DRAM_BW_Use -- sleep 1
Performance counter stats for 'system wide':
169 arb/event=0x84,umask=0x1/ # 0.00 DRAM_BW_Use
40,427 arb/event=0x81,umask=0x1/
1,000,902,197 ns duration_time
1.000902197 seconds time elapsed
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring")
Signed-off-by: Jin Yao <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/builtin-stat.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 6e2502de755a8..6494383687f89 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -1963,8 +1963,10 @@ static void setup_system_wide(int forks)
struct evsel *counter;
evlist__for_each_entry(evsel_list, counter) {
- if (!counter->core.system_wide)
+ if (!counter->core.system_wide &&
+ strcmp(counter->name, "duration_time")) {
return;
+ }
}
if (evsel_list->core.nr_entries)
--
2.25.1
From: Tomas Henzl <[email protected]>
[ Upstream commit 45181eab8ba79ed7a41b549f00500c0093828521 ]
_base_process_reply_queue() called from _base_interrupt() may schedule a
new irq poll. Fix this by calling synchronize_irq() first.
Also ensure that enable_irq() is called only when necessary to avoid
"Unbalanced enable for IRQ..." errors.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 320e77acb327 ("scsi: mpt3sas: Irq poll to avoid CPU hard lockups")
Acked-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Tomas Henzl <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index a85c9672c6ea3..a67749c8f4ab3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1808,18 +1808,22 @@ mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc)
/* TMs are on msix_index == 0 */
if (reply_q->msix_index == 0)
continue;
+ synchronize_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index));
if (reply_q->irq_poll_scheduled) {
/* Calling irq_poll_disable will wait for any pending
* callbacks to have completed.
*/
irq_poll_disable(&reply_q->irqpoll);
irq_poll_enable(&reply_q->irqpoll);
- reply_q->irq_poll_scheduled = false;
- reply_q->irq_line_enable = true;
- enable_irq(reply_q->os_irq);
- continue;
+ /* check how the scheduled poll has ended,
+ * clean up only if necessary
+ */
+ if (reply_q->irq_poll_scheduled) {
+ reply_q->irq_poll_scheduled = false;
+ reply_q->irq_line_enable = true;
+ enable_irq(reply_q->os_irq);
+ }
}
- synchronize_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index));
}
}
--
2.25.1
From: Łukasz Stelmach <[email protected]>
[ Upstream commit 581e2b41977dfc2d4c26c8e976f89c43bb92f9bf ]
Fix issues with DMA transfers bigger than 512 bytes on Exynos3250. Without
the patches such transfers fail to complete. This solution to the problem
is found in the vendor kernel for ARTIK5 boards based on Exynos3250.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Łukasz Stelmach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-s3c64xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index cf67ea60dc0ed..fb5e2ba4b6b97 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -678,11 +678,11 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
sdd->state &= ~RXBUSY;
sdd->state &= ~TXBUSY;
- s3c64xx_enable_datapath(sdd, xfer, use_dma);
-
/* Start the signals */
s3c64xx_spi_set_cs(spi, true);
+ s3c64xx_enable_datapath(sdd, xfer, use_dma);
+
spin_unlock_irqrestore(&sdd->lock, flags);
if (use_dma)
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit fe6c6a4af2be8c15bac77f7ea160f947c04840d1 ]
When radeon_kick_out_firmware_fb() fails, info should be
freed just like the subsequent error paths.
Fixes: 069ee21a82344 ("fbdev: Fix loading of module radeonfb on PowerMac")
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Mathieu Malaterre <[email protected]>
Cc: Kangjie Lu <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/aty/radeon_base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index e116a3f9ad566..687bd2c0d5040 100644
--- a/drivers/video/fbdev/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
@@ -2311,7 +2311,7 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
ret = radeon_kick_out_firmware_fb(pdev);
if (ret)
- return ret;
+ goto err_release_fb;
/* request the mem regions */
ret = pci_request_region(pdev, 0, "radeonfb framebuffer");
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit 8d95ab34b21ee0f870a9185b6457e8f6eb54914c ]
When devm_clk_get() returns -EPROBE_DEFER, sdio_priv
should be freed just like when wilc_cfg80211_init()
fails.
Fixes: 8692b047e86cf ("staging: wilc1000: look for rtc_clk clock")
Signed-off-by: Dinghao Liu <[email protected]>
Acked-by: Ajay Singh <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/wilc1000/sdio.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/wilc1000/sdio.c b/drivers/staging/wilc1000/sdio.c
index 36eb589263bfd..b14e4ed6134fc 100644
--- a/drivers/staging/wilc1000/sdio.c
+++ b/drivers/staging/wilc1000/sdio.c
@@ -151,9 +151,10 @@ static int wilc_sdio_probe(struct sdio_func *func,
wilc->dev = &func->dev;
wilc->rtc_clk = devm_clk_get(&func->card->dev, "rtc");
- if (PTR_ERR_OR_ZERO(wilc->rtc_clk) == -EPROBE_DEFER)
+ if (PTR_ERR_OR_ZERO(wilc->rtc_clk) == -EPROBE_DEFER) {
+ kfree(sdio_priv);
return -EPROBE_DEFER;
- else if (!IS_ERR(wilc->rtc_clk))
+ } else if (!IS_ERR(wilc->rtc_clk))
clk_prepare_enable(wilc->rtc_clk);
dev_info(&func->dev, "Driver Initializing success\n");
--
2.25.1
From: Brian Norris <[email protected]>
[ Upstream commit 22b726cbdd09d9891ede8aa122a950d2d0ae5e09 ]
I'm not a standards expert, but this really looks to be undefined
behavior, when chip->dig_cck may be NULL. (And, we're trying to do a
NULL check a few lines down, because some chip variants will use NULL.)
Fixes: fc637a860a82 ("rtw88: 8723d: Set IG register for CCK rate")
Signed-off-by: Brian Norris <[email protected]>
Acked-by: Yan-Hsuan Chuang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/phy.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/phy.c b/drivers/net/wireless/realtek/rtw88/phy.c
index 8d93f31597469..9687b376d221b 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -147,12 +147,13 @@ void rtw_phy_dig_write(struct rtw_dev *rtwdev, u8 igi)
{
struct rtw_chip_info *chip = rtwdev->chip;
struct rtw_hal *hal = &rtwdev->hal;
- const struct rtw_hw_reg *dig_cck = &chip->dig_cck[0];
u32 addr, mask;
u8 path;
- if (dig_cck)
+ if (chip->dig_cck) {
+ const struct rtw_hw_reg *dig_cck = &chip->dig_cck[0];
rtw_write32_mask(rtwdev, dig_cck->addr, dig_cck->mask, igi >> 1);
+ }
for (path = 0; path < hal->rf_path_num; path++) {
addr = chip->dig[path].addr;
--
2.25.1
From: Serge Semin <[email protected]>
[ Upstream commit 0015503e5f6357f286bef34d039e43359fa4efd4 ]
Instead of converting the update timeout data to the milliseconds each
time on the read procedure let's preserve the currently set timeout in the
dedicated driver private data cache. The cached value will be then used in
the timeout read method and in the alarm-less data conversion to prevent
the caller task hanging up in case if the PVT sensor is suddenly powered
down.
Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver")
Signed-off-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/bt1-pvt.c | 85 ++++++++++++++++++++++-------------------
drivers/hwmon/bt1-pvt.h | 3 ++
2 files changed, 49 insertions(+), 39 deletions(-)
diff --git a/drivers/hwmon/bt1-pvt.c b/drivers/hwmon/bt1-pvt.c
index f4b7353c078a8..2600426a3b21c 100644
--- a/drivers/hwmon/bt1-pvt.c
+++ b/drivers/hwmon/bt1-pvt.c
@@ -655,44 +655,16 @@ static int pvt_write_trim(struct pvt_hwmon *pvt, long val)
static int pvt_read_timeout(struct pvt_hwmon *pvt, long *val)
{
- unsigned long rate;
- ktime_t kt;
- u32 data;
-
- rate = clk_get_rate(pvt->clks[PVT_CLOCK_REF].clk);
- if (!rate)
- return -ENODEV;
-
- /*
- * Don't bother with mutex here, since we just read data from MMIO.
- * We also have to scale the ticks timeout up to compensate the
- * ms-ns-data translations.
- */
- data = readl(pvt->regs + PVT_TTIMEOUT) + 1;
+ int ret;
- /*
- * Calculate ref-clock based delay (Ttotal) between two consecutive
- * data samples of the same sensor. So we first must calculate the
- * delay introduced by the internal ref-clock timer (Tref * Fclk).
- * Then add the constant timeout cuased by each conversion latency
- * (Tmin). The basic formulae for each conversion is following:
- * Ttotal = Tref * Fclk + Tmin
- * Note if alarms are enabled the sensors are polled one after
- * another, so in order to have the delay being applicable for each
- * sensor the requested value must be equally redistirbuted.
- */
-#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
- kt = ktime_set(PVT_SENSORS_NUM * (u64)data, 0);
- kt = ktime_divns(kt, rate);
- kt = ktime_add_ns(kt, PVT_SENSORS_NUM * PVT_TOUT_MIN);
-#else
- kt = ktime_set(data, 0);
- kt = ktime_divns(kt, rate);
- kt = ktime_add_ns(kt, PVT_TOUT_MIN);
-#endif
+ ret = mutex_lock_interruptible(&pvt->iface_mtx);
+ if (ret)
+ return ret;
/* Return the result in msec as hwmon sysfs interface requires. */
- *val = ktime_to_ms(kt);
+ *val = ktime_to_ms(pvt->timeout);
+
+ mutex_unlock(&pvt->iface_mtx);
return 0;
}
@@ -700,7 +672,7 @@ static int pvt_read_timeout(struct pvt_hwmon *pvt, long *val)
static int pvt_write_timeout(struct pvt_hwmon *pvt, long val)
{
unsigned long rate;
- ktime_t kt;
+ ktime_t kt, cache;
u32 data;
int ret;
@@ -713,7 +685,7 @@ static int pvt_write_timeout(struct pvt_hwmon *pvt, long val)
* between all available sensors to have the requested delay
* applicable to each individual sensor.
*/
- kt = ms_to_ktime(val);
+ cache = kt = ms_to_ktime(val);
#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
kt = ktime_divns(kt, PVT_SENSORS_NUM);
#endif
@@ -742,6 +714,7 @@ static int pvt_write_timeout(struct pvt_hwmon *pvt, long val)
return ret;
pvt_set_tout(pvt, data);
+ pvt->timeout = cache;
mutex_unlock(&pvt->iface_mtx);
@@ -1018,10 +991,17 @@ static int pvt_check_pwr(struct pvt_hwmon *pvt)
return ret;
}
-static void pvt_init_iface(struct pvt_hwmon *pvt)
+static int pvt_init_iface(struct pvt_hwmon *pvt)
{
+ unsigned long rate;
u32 trim, temp;
+ rate = clk_get_rate(pvt->clks[PVT_CLOCK_REF].clk);
+ if (!rate) {
+ dev_err(pvt->dev, "Invalid reference clock rate\n");
+ return -ENODEV;
+ }
+
/*
* Make sure all interrupts and controller are disabled so not to
* accidentally have ISR executed before the driver data is fully
@@ -1036,12 +1016,37 @@ static void pvt_init_iface(struct pvt_hwmon *pvt)
pvt_set_mode(pvt, pvt_info[pvt->sensor].mode);
pvt_set_tout(pvt, PVT_TOUT_DEF);
+ /*
+ * Preserve the current ref-clock based delay (Ttotal) between the
+ * sensors data samples in the driver data so not to recalculate it
+ * each time on the data requests and timeout reads. It consists of the
+ * delay introduced by the internal ref-clock timer (N / Fclk) and the
+ * constant timeout caused by each conversion latency (Tmin):
+ * Ttotal = N / Fclk + Tmin
+ * If alarms are enabled the sensors are polled one after another and
+ * in order to get the next measurement of a particular sensor the
+ * caller will have to wait for at most until all the others are
+ * polled. In that case the formulae will look a bit different:
+ * Ttotal = 5 * (N / Fclk + Tmin)
+ */
+#if defined(CONFIG_SENSORS_BT1_PVT_ALARMS)
+ pvt->timeout = ktime_set(PVT_SENSORS_NUM * PVT_TOUT_DEF, 0);
+ pvt->timeout = ktime_divns(pvt->timeout, rate);
+ pvt->timeout = ktime_add_ns(pvt->timeout, PVT_SENSORS_NUM * PVT_TOUT_MIN);
+#else
+ pvt->timeout = ktime_set(PVT_TOUT_DEF, 0);
+ pvt->timeout = ktime_divns(pvt->timeout, rate);
+ pvt->timeout = ktime_add_ns(pvt->timeout, PVT_TOUT_MIN);
+#endif
+
trim = PVT_TRIM_DEF;
if (!of_property_read_u32(pvt->dev->of_node,
"baikal,pvt-temp-offset-millicelsius", &temp))
trim = pvt_calc_trim(temp);
pvt_set_trim(pvt, trim);
+
+ return 0;
}
static int pvt_request_irq(struct pvt_hwmon *pvt)
@@ -1149,7 +1154,9 @@ static int pvt_probe(struct platform_device *pdev)
if (ret)
return ret;
- pvt_init_iface(pvt);
+ ret = pvt_init_iface(pvt);
+ if (ret)
+ return ret;
ret = pvt_request_irq(pvt);
if (ret)
diff --git a/drivers/hwmon/bt1-pvt.h b/drivers/hwmon/bt1-pvt.h
index 5eac73e948854..93b8dd5e7c944 100644
--- a/drivers/hwmon/bt1-pvt.h
+++ b/drivers/hwmon/bt1-pvt.h
@@ -10,6 +10,7 @@
#include <linux/completion.h>
#include <linux/hwmon.h>
#include <linux/kernel.h>
+#include <linux/ktime.h>
#include <linux/mutex.h>
#include <linux/seqlock.h>
@@ -201,6 +202,7 @@ struct pvt_cache {
* if alarms are disabled).
* @sensor: current PVT sensor the data conversion is being performed for.
* @cache: data cache descriptor.
+ * @timeout: conversion timeout cache.
*/
struct pvt_hwmon {
struct device *dev;
@@ -214,6 +216,7 @@ struct pvt_hwmon {
struct mutex iface_mtx;
enum pvt_sensor_type sensor;
struct pvt_cache cache[PVT_SENSORS_NUM];
+ ktime_t timeout;
};
/*
--
2.25.1
From: Artem Savkov <[email protected]>
[ Upstream commit 71a174b39f10b4b93223d374722aa894b5d8a82e ]
b6da31b2c07c "tty: Fix data race in tty_insert_flip_string_fixed_flag"
puts tty_flip_buffer_push under port->lock introducing the following
possible circular locking dependency:
[30129.876566] ======================================================
[30129.876566] WARNING: possible circular locking dependency detected
[30129.876567] 5.9.0-rc2+ #3 Tainted: G S W
[30129.876568] ------------------------------------------------------
[30129.876568] sysrq.sh/1222 is trying to acquire lock:
[30129.876569] ffffffff92c39480 (console_owner){....}-{0:0}, at: console_unlock+0x3fe/0xa90
[30129.876572] but task is already holding lock:
[30129.876572] ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca
[30129.876576] which lock already depends on the new lock.
[30129.876577] the existing dependency chain (in reverse order) is:
[30129.876578] -> #3 (&pool->lock/1){-.-.}-{2:2}:
[30129.876581] _raw_spin_lock+0x30/0x70
[30129.876581] __queue_work+0x1a3/0x10f0
[30129.876582] queue_work_on+0x78/0x80
[30129.876582] pty_write+0x165/0x1e0
[30129.876583] n_tty_write+0x47f/0xf00
[30129.876583] tty_write+0x3d6/0x8d0
[30129.876584] vfs_write+0x1a8/0x650
[30129.876588] -> #2 (&port->lock#2){-.-.}-{2:2}:
[30129.876590] _raw_spin_lock_irqsave+0x3b/0x80
[30129.876591] tty_port_tty_get+0x1d/0xb0
[30129.876592] tty_port_default_wakeup+0xb/0x30
[30129.876592] serial8250_tx_chars+0x3d6/0x970
[30129.876593] serial8250_handle_irq.part.12+0x216/0x380
[30129.876593] serial8250_default_handle_irq+0x82/0xe0
[30129.876594] serial8250_interrupt+0xdd/0x1b0
[30129.876595] __handle_irq_event_percpu+0xfc/0x850
[30129.876602] -> #1 (&port->lock){-.-.}-{2:2}:
[30129.876605] _raw_spin_lock_irqsave+0x3b/0x80
[30129.876605] serial8250_console_write+0x12d/0x900
[30129.876606] console_unlock+0x679/0xa90
[30129.876606] register_console+0x371/0x6e0
[30129.876607] univ8250_console_init+0x24/0x27
[30129.876607] console_init+0x2f9/0x45e
[30129.876609] -> #0 (console_owner){....}-{0:0}:
[30129.876611] __lock_acquire+0x2f70/0x4e90
[30129.876612] lock_acquire+0x1ac/0xad0
[30129.876612] console_unlock+0x460/0xa90
[30129.876613] vprintk_emit+0x130/0x420
[30129.876613] printk+0x9f/0xc5
[30129.876614] show_pwq+0x154/0x618
[30129.876615] show_workqueue_state.cold.55+0x193/0x6ca
[30129.876615] __handle_sysrq+0x244/0x460
[30129.876616] write_sysrq_trigger+0x48/0x4a
[30129.876616] proc_reg_write+0x1a6/0x240
[30129.876617] vfs_write+0x1a8/0x650
[30129.876619] other info that might help us debug this:
[30129.876620] Chain exists of:
[30129.876621] console_owner --> &port->lock#2 --> &pool->lock/1
[30129.876625] Possible unsafe locking scenario:
[30129.876626] CPU0 CPU1
[30129.876626] ---- ----
[30129.876627] lock(&pool->lock/1);
[30129.876628] lock(&port->lock#2);
[30129.876630] lock(&pool->lock/1);
[30129.876631] lock(console_owner);
[30129.876633] *** DEADLOCK ***
[30129.876634] 5 locks held by sysrq.sh/1222:
[30129.876634] #0: ffff8881d3ce0470 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x359/0x650
[30129.876637] #1: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: __handle_sysrq+0x4d/0x460
[30129.876640] #2: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: show_workqueue_state+0x5/0xf0
[30129.876642] #3: ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca
[30129.876645] #4: ffffffff92c39980 (console_lock){+.+.}-{0:0}, at: vprintk_emit+0x123/0x420
[30129.876648] stack backtrace:
[30129.876649] CPU: 3 PID: 1222 Comm: sysrq.sh Tainted: G S W 5.9.0-rc2+ #3
[30129.876649] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012
[30129.876650] Call Trace:
[30129.876650] dump_stack+0x9d/0xe0
[30129.876651] check_noncircular+0x34f/0x410
[30129.876653] __lock_acquire+0x2f70/0x4e90
[30129.876656] lock_acquire+0x1ac/0xad0
[30129.876658] console_unlock+0x460/0xa90
[30129.876660] vprintk_emit+0x130/0x420
[30129.876660] printk+0x9f/0xc5
[30129.876661] show_pwq+0x154/0x618
[30129.876662] show_workqueue_state.cold.55+0x193/0x6ca
[30129.876664] __handle_sysrq+0x244/0x460
[30129.876665] write_sysrq_trigger+0x48/0x4a
[30129.876665] proc_reg_write+0x1a6/0x240
[30129.876666] vfs_write+0x1a8/0x650
It looks like the commit was aimed to protect tty_insert_flip_string and
there is no need for tty_flip_buffer_push to be under this lock.
Fixes: b6da31b2c07c ("tty: Fix data race in tty_insert_flip_string_fixed_flag")
Signed-off-by: Artem Savkov <[email protected]>
Acked-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/pty.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 00099a8439d21..c6a1d8c4e6894 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -120,10 +120,10 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
spin_lock_irqsave(&to->port->lock, flags);
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to->port, buf, c);
+ spin_unlock_irqrestore(&to->port->lock, flags);
/* And shovel */
if (c)
tty_flip_buffer_push(to->port);
- spin_unlock_irqrestore(&to->port->lock, flags);
}
return c;
}
--
2.25.1
From: Serge Semin <[email protected]>
[ Upstream commit a6db1561291fc0f2f9aa23bf38f381adc63e7b14 ]
Baikal-T1 PVT sensor has got a dedicated power supply domain (feed up by
the external GPVT/VPVT_18 pins). In case if it isn't powered up, the
registers will be accessible, but the sensor conversion just won't happen.
Due to that an attempt to read data from any PVT sensor will cause the
task hanging up. For instance that will happen if XP11 jumper isn't
installed on the Baikal-T1-based BFK3.1 board. Let's at least test whether
the conversion work on the device probe procedure. By doing so will make
sure that the PVT sensor is powered up at least at boot time.
Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver")
Signed-off-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/bt1-pvt.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/hwmon/bt1-pvt.c b/drivers/hwmon/bt1-pvt.c
index 94698cae04971..f4b7353c078a8 100644
--- a/drivers/hwmon/bt1-pvt.c
+++ b/drivers/hwmon/bt1-pvt.c
@@ -13,6 +13,7 @@
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
@@ -982,6 +983,41 @@ static int pvt_request_clks(struct pvt_hwmon *pvt)
return 0;
}
+static int pvt_check_pwr(struct pvt_hwmon *pvt)
+{
+ unsigned long tout;
+ int ret = 0;
+ u32 data;
+
+ /*
+ * Test out the sensor conversion functionality. If it is not done on
+ * time then the domain must have been unpowered and we won't be able
+ * to use the device later in this driver.
+ * Note If the power source is lost during the normal driver work the
+ * data read procedure will either return -ETIMEDOUT (for the
+ * alarm-less driver configuration) or just stop the repeated
+ * conversion. In the later case alas we won't be able to detect the
+ * problem.
+ */
+ pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_ALL, PVT_INTR_ALL);
+ pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, PVT_CTRL_EN);
+ pvt_set_tout(pvt, 0);
+ readl(pvt->regs + PVT_DATA);
+
+ tout = PVT_TOUT_MIN / NSEC_PER_USEC;
+ usleep_range(tout, 2 * tout);
+
+ data = readl(pvt->regs + PVT_DATA);
+ if (!(data & PVT_DATA_VALID)) {
+ ret = -ENODEV;
+ dev_err(pvt->dev, "Sensor is powered down\n");
+ }
+
+ pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
+
+ return ret;
+}
+
static void pvt_init_iface(struct pvt_hwmon *pvt)
{
u32 trim, temp;
@@ -1109,6 +1145,10 @@ static int pvt_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = pvt_check_pwr(pvt);
+ if (ret)
+ return ret;
+
pvt_init_iface(pvt);
ret = pvt_request_irq(pvt);
--
2.25.1
From: Necip Fazil Yildiran <[email protected]>
[ Upstream commit 513034d8b089b9a49dab57845aee70e830fe7334 ]
When PINCTRL_BCM2835 is enabled and GPIOLIB is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP
Depends on [n]: GPIOLIB [=n]
Selected by [y]:
- PINCTRL_BCM2835 [=y] && PINCTRL [=y] && OF [=y] && (ARCH_BCM2835 [=n] || ARCH_BRCMSTB [=n] || COMPILE_TEST [=y])
The reason is that PINCTRL_BCM2835 selects GPIOLIB_IRQCHIP without
depending on or selecting GPIOLIB while GPIOLIB_IRQCHIP is subordinate to
GPIOLIB.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: 85ae9e512f43 ("pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP")
Signed-off-by: Necip Fazil Yildiran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/bcm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index dcf7df797af75..0ed14de0134cf 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -23,6 +23,7 @@ config PINCTRL_BCM2835
select PINMUX
select PINCONF
select GENERIC_PINCONF
+ select GPIOLIB
select GPIOLIB_IRQCHIP
default ARCH_BCM2835 || ARCH_BRCMSTB
help
--
2.25.1
From: Wang Yufen <[email protected]>
[ Upstream commit 28f1632118818d9dccabf4c0fccfe49686742317 ]
When qmi_add_lookup fail, we should destroy the workqueue
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/qmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index c00a99ad8dbc1..497cff7e64cc5 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -2419,6 +2419,7 @@ int ath11k_qmi_init_service(struct ath11k_base *ab)
ATH11K_QMI_WLFW_SERVICE_INS_ID_V01);
if (ret < 0) {
ath11k_warn(ab, "failed to add qmi lookup\n");
+ destroy_workqueue(ab->qmi.event_wq);
return ret;
}
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit d2ab7f00f4321370a8ee14e5630d4349fdacc42e ]
A possible call chain is as follow:
mwifiex_sdio_interrupt (sdio.c)
--> mwifiex_main_process (main.c)
--> mwifiex_process_cmdresp (cmdevt.c)
--> mwifiex_process_sta_cmdresp (sta_cmdresp.c)
--> mwifiex_ret_802_11_scan (scan.c)
--> mwifiex_parse_single_response_buf (scan.c)
'mwifiex_sdio_interrupt()' is an interrupt function.
Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC.
So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in
'mwifiex_parse_single_response_buf()'.
Fixes: 7c6fa2a843c5 ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API")
or
Fixes: 601216e12c65e ("mwifiex: process RX packets in SDIO IRQ thread directly")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/scan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index ff932627a46c1..2fb69a590bd8e 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1889,7 +1889,7 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
chan, CFG80211_BSS_FTYPE_UNKNOWN,
bssid, timestamp,
cap_info_bitmap, beacon_period,
- ie_buf, ie_len, rssi, GFP_KERNEL);
+ ie_buf, ie_len, rssi, GFP_ATOMIC);
if (bss) {
bss_priv = (struct mwifiex_bss_priv *)bss->priv;
bss_priv->band = band;
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit d0675b67b42eb4f1a840d1513b5b00f78312f833 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
PM runtime put is not called in error handling paths.
Thus call pm_runtime_put_sync() if pm_runtime_get_sync() fails.
Fixes: 02afa816dbbf ("media: camss: Add basic runtime PM support")
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/camss/camss-csiphy.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index 008afb85023be..3c5b9082ad723 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -176,8 +176,10 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on)
int ret;
ret = pm_runtime_get_sync(dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_sync(dev);
return ret;
+ }
ret = csiphy_set_clock_rates(csiphy);
if (ret < 0) {
--
2.25.1
From: Tom Rix <[email protected]>
[ Upstream commit 9c9f015bc9f8839831c7ba0a6d731a3853c464e2 ]
Clang static analysis reports this error
brcmfmac/core.c:490:4: warning: Dereference of null pointer
(*ifp)->ndev->stats.rx_errors++;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In this block of code
if (ret || !(*ifp) || !(*ifp)->ndev) {
if (ret != -ENODATA && *ifp)
(*ifp)->ndev->stats.rx_errors++;
brcmu_pkt_buf_free_skb(skb);
return -ENODATA;
}
(*ifp)->ndev being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Fixes: 91b632803ee4 ("brcmfmac: Use net_device_stats from struct net_device")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index c88655acc78c7..76b478f70b4bb 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -483,7 +483,7 @@ static int brcmf_rx_hdrpull(struct brcmf_pub *drvr, struct sk_buff *skb,
ret = brcmf_proto_hdrpull(drvr, true, skb, ifp);
if (ret || !(*ifp) || !(*ifp)->ndev) {
- if (ret != -ENODATA && *ifp)
+ if (ret != -ENODATA && *ifp && (*ifp)->ndev)
(*ifp)->ndev->stats.rx_errors++;
brcmu_pkt_buf_free_skb(skb);
return -ENODATA;
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit acac75bb451fd39344eb54fad6602dfc9482e970 ]
'rtl8192_irq_rx_tasklet()' is a tasklet initialized in
'rtl8192_init_priv_task()'.
>From this function it is possible to allocate some memory with the
GFP_KERNEL flag, which is not allowed in the atomic context of a tasklet.
Use GFP_ATOMIC instead.
The call chain is:
rtl8192_irq_rx_tasklet (in r8192U_core.c)
--> rtl8192_rx_nomal (in r8192U_core.c)
--> ieee80211_rx (in ieee80211/ieee80211_rx.c)
--> RxReorderIndicatePacket (in ieee80211/ieee80211_rx.c)
Fixes: 79a5ccd97209 ("staging: rtl8192u: fix large frame size compiler warning")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 195d963c4fbb4..b6fee7230ce05 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -597,7 +597,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
prxbIndicateArray = kmalloc_array(REORDER_WIN_SIZE,
sizeof(struct ieee80211_rxb *),
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!prxbIndicateArray)
return;
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 574918e69720fe62ab3eb42ec3750230c8d16b06 ]
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla4xxx/ql4_os.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 5dc697ce8b5dd..4a6b15dc36aaf 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -1220,7 +1220,7 @@ static int qla4xxx_get_host_stats(struct Scsi_Host *shost, char *buf, int len)
le64_to_cpu(ql_iscsi_stats->iscsi_sequence_error);
exit_host_stats:
if (ql_iscsi_stats)
- dma_free_coherent(&ha->pdev->dev, host_stats_size,
+ dma_free_coherent(&ha->pdev->dev, stats_size,
ql_iscsi_stats, iscsi_stats_dma);
ql4_printk(KERN_INFO, ha, "%s: Get host stats done\n",
--
2.25.1
From: Colin Ian King <[email protected]>
[ Upstream commit 1d5503331b12a76266049289747dfd94f1643fde ]
The 32 bit unsigned integer bl_pwm is being shifted using 32 bit arithmetic
and then being assigned to a 64 bit unsigned integer. There is a potential
for a 32 bit overflow so cast bl_pwm to enforce a 64 bit shift operation
to avoid this.
Addresses-Coverity: ("unintentional integer overflow")
Fixes: 3ba01817365c ("drm/amd/display: Move panel_cntl specific register from abm to panel_cntl.")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c b/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c
index ebff9b1e312e5..124c081a0f2ca 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c
@@ -75,7 +75,7 @@ static unsigned int calculate_16_bit_backlight_from_pwm(struct dce_panel_cntl *d
else
bl_pwm &= 0xFFFF;
- current_backlight = bl_pwm << (1 + bl_int_count);
+ current_backlight = (uint64_t)bl_pwm << (1 + bl_int_count);
if (bl_period == 0)
bl_period = 0xFFFF;
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit 7dae2aaaf432767ca7aa11fa84643a7c2600dbdd ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
And also, when the call of function vpe_runtime_get() failed,
we won't call vpe_runtime_put().
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails
inside vpe_runtime_get().
Fixes: 4571912743ac ("[media] v4l: ti-vpe: Add VPE mem to mem driver")
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/ti-vpe/vpe.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index cff2fcd6d812a..82d3ee45e2e90 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2475,6 +2475,8 @@ static int vpe_runtime_get(struct platform_device *pdev)
r = pm_runtime_get_sync(&pdev->dev);
WARN_ON(r < 0);
+ if (r)
+ pm_runtime_put_noidle(&pdev->dev);
return r < 0 ? r : 0;
}
--
2.25.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 2705cd7558e718a7240c64eb0afb2edad5f8c190 ]
The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks
it as untrusted so we have to check it before using it as an array
offset.
This is similar to a bug that syzkaller found in commit e4ff08a4d727
("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is
probably a real issue.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20200813141253.GA457408@mwanda
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_hst.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index d2e062eaf5614..510e61e97dbcb 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -339,6 +339,8 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle,
if (skb) {
htc_hdr = (struct htc_frame_hdr *) skb->data;
+ if (htc_hdr->endpoint_id >= ARRAY_SIZE(htc_handle->endpoint))
+ goto ret;
endpoint = &htc_handle->endpoint[htc_hdr->endpoint_id];
skb_pull(skb, sizeof(struct htc_frame_hdr));
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 454530a9950b5a26d4998908249564cedfc4babc ]
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.
Fixes: 1863008369ae ("ath10k: fix shadow register implementation for WCN3990")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Rakesh Pillai <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/ce.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 294fbc1e89ab8..e6e0284e47837 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -1555,7 +1555,7 @@ ath10k_ce_alloc_src_ring(struct ath10k *ar, unsigned int ce_id,
ret = ath10k_ce_alloc_shadow_base(ar, src_ring, nentries);
if (ret) {
dma_free_coherent(ar->dev,
- (nentries * sizeof(struct ce_desc_64) +
+ (nentries * sizeof(struct ce_desc) +
CE_DESC_RING_ALIGN),
src_ring->base_addr_owner_space_unaligned,
base_addr);
--
2.25.1
From: Rohit kumar <[email protected]>
[ Upstream commit 753a6e17942f6f425ca622e1610625998312ad89 ]
i2sctl register value is set to 0 during hw_free(). This
impacts any ongoing concurrent session on the same i2s
port. As trigger() stop already resets enable bit to 0,
there is no need of explicit hw_free. Removing it to
fix the issue.
Fixes: 80beab8e1d86 ("ASoC: qcom: Add LPASS CPU DAI driver")
Signed-off-by: Rohit kumar <[email protected]>
Reviewed-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/qcom/lpass-cpu.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index e00a4af29c13f..f25da84f175ac 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -209,21 +209,6 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
return 0;
}
-static int lpass_cpu_daiops_hw_free(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
- int ret;
-
- ret = regmap_write(drvdata->lpaif_map,
- LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
- 0);
- if (ret)
- dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
-
- return ret;
-}
-
static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -304,7 +289,6 @@ const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = {
.startup = lpass_cpu_daiops_startup,
.shutdown = lpass_cpu_daiops_shutdown,
.hw_params = lpass_cpu_daiops_hw_params,
- .hw_free = lpass_cpu_daiops_hw_free,
.prepare = lpass_cpu_daiops_prepare,
.trigger = lpass_cpu_daiops_trigger,
};
--
2.25.1
From: Rohit kumar <[email protected]>
[ Upstream commit 5fd188215d4eb52703600d8986b22311099a5940 ]
lpass_pcm_data is never freed. Free it in close
ops to avoid memory leak.
Fixes: 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage")
Signed-off-by: Rohit kumar <[email protected]>
Reviewed-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/qcom/lpass-platform.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index 34f7fd1bab1cf..693839deebfe8 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -61,7 +61,7 @@ static int lpass_platform_pcmops_open(struct snd_soc_component *component,
int ret, dma_ch, dir = substream->stream;
struct lpass_pcm_data *data;
- data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -118,6 +118,7 @@ static int lpass_platform_pcmops_close(struct snd_soc_component *component,
if (v->free_dma_channel)
v->free_dma_channel(drvdata, data->dma_ch);
+ kfree(data);
return 0;
}
--
2.25.1
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 3b9fb6791e7113679b1eb472e6ce1659e80f5797 ]
Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for
the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here.
This patch fixes the data-rate declared in the 5GHz table.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680
hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 702b689c06df3..f3ea629764fa8 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -163,7 +163,7 @@ static struct ieee80211_supported_band wcn_band_5ghz = {
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
.mcs = {
.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
- .rx_highest = cpu_to_le16(72),
+ .rx_highest = cpu_to_le16(150),
.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
}
}
--
2.25.1
From: Alex Gartrell <[email protected]>
[ Upstream commit ef05afa66c59c2031a3798916ef3ff3778232129 ]
There are code paths where EINVAL is returned directly without setting
errno. In that case, errno could be 0, which would mask the
failure. For example, if a careless programmer set log_level to 10000
out of laziness, they would have to spend a long time trying to figure
out why.
Fixes: 4f33ddb4e3e2 ("libbpf: Propagate EPERM to caller on program load")
Signed-off-by: Alex Gartrell <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/libbpf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 236c91aff48f8..e4d304247c1ba 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -5253,7 +5253,7 @@ load_program(struct bpf_program *prog, struct bpf_insn *insns, int insns_cnt,
free(log_buf);
goto retry_load;
}
- ret = -errno;
+ ret = errno ? -errno : -LIBBPF_ERRNO__LOAD;
cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg));
pr_warn("load bpf program failed: %s\n", cp);
pr_perm_msg(ret);
--
2.25.1
From: Stanley Chu <[email protected]>
[ Upstream commit a3e40b80dc951057033dce86f0e675b2b822b513 ]
Simply add HOST_PA_TACTIVATE quirk back since it was incorrectly removed
before.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 47d054580a75 ("scsi: ufs-mediatek: fix HOST_PA_TACTIVATE quirk for Samsung UFS Devices")
Signed-off-by: Stanley Chu <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufs-mediatek.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index d56ce8d97d4e8..7ad127f213977 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -585,13 +585,7 @@ static int ufs_mtk_apply_dev_quirks(struct ufs_hba *hba)
static void ufs_mtk_fixup_dev_quirks(struct ufs_hba *hba)
{
- struct ufs_dev_info *dev_info = &hba->dev_info;
- u16 mid = dev_info->wmanufacturerid;
-
ufshcd_fixup_dev_quirks(hba, ufs_mtk_dev_fixups);
-
- if (mid == UFS_VENDOR_SAMSUNG)
- hba->dev_quirks &= ~UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE;
}
/**
--
2.25.1
From: Yu Kuai <[email protected]>
[ Upstream commit e525db7e4b44c5b2b5aac0dad24e23cb58c54d22 ]
if of_find_device_by_node() succeed, imx_es8328_probe() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: 7e7292dba215 ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-es8328.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/soc/fsl/imx-es8328.c b/sound/soc/fsl/imx-es8328.c
index 15a27a2cd0cae..fad1eb6253d53 100644
--- a/sound/soc/fsl/imx-es8328.c
+++ b/sound/soc/fsl/imx-es8328.c
@@ -145,13 +145,13 @@ static int imx_es8328_probe(struct platform_device *pdev)
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
- goto fail;
+ goto put_device;
}
comp = devm_kzalloc(dev, 3 * sizeof(*comp), GFP_KERNEL);
if (!comp) {
ret = -ENOMEM;
- goto fail;
+ goto put_device;
}
data->dev = dev;
@@ -182,12 +182,12 @@ static int imx_es8328_probe(struct platform_device *pdev)
ret = snd_soc_of_parse_card_name(&data->card, "model");
if (ret) {
dev_err(dev, "Unable to parse card name\n");
- goto fail;
+ goto put_device;
}
ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
if (ret) {
dev_err(dev, "Unable to parse routing: %d\n", ret);
- goto fail;
+ goto put_device;
}
data->card.num_links = 1;
data->card.owner = THIS_MODULE;
@@ -196,10 +196,12 @@ static int imx_es8328_probe(struct platform_device *pdev)
ret = snd_soc_register_card(&data->card);
if (ret) {
dev_err(dev, "Unable to register: %d\n", ret);
- goto fail;
+ goto put_device;
}
platform_set_drvdata(pdev, data);
+put_device:
+ put_device(&ssi_pdev->dev);
fail:
of_node_put(ssi_np);
of_node_put(codec_np);
--
2.25.1
From: Steven Price <[email protected]>
[ Upstream commit 8c3c818c23a5bbce6ff180dd2ee04415241df77c ]
The GPU 'CONFIG' registers used to work around hardware issues are
cleared on reset so need to be programmed every time the GPU is reset.
However panfrost_device_reset() failed to do this.
To avoid this in future instead move the call to
panfrost_gpu_init_quirks() to panfrost_gpu_power_on() so that the
regsiters are always programmed just before the cores are powered.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Steven Price <[email protected]>
Reviewed-by: Alyssa Rosenzweig <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panfrost/panfrost_gpu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index f2c1ddc41a9bf..689b92893e0e1 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -304,6 +304,8 @@ void panfrost_gpu_power_on(struct panfrost_device *pfdev)
int ret;
u32 val;
+ panfrost_gpu_init_quirks(pfdev);
+
/* Just turn on everything for now */
gpu_write(pfdev, L2_PWRON_LO, pfdev->features.l2_present);
ret = readl_relaxed_poll_timeout(pfdev->iomem + L2_READY_LO,
@@ -355,7 +357,6 @@ int panfrost_gpu_init(struct panfrost_device *pfdev)
return err;
}
- panfrost_gpu_init_quirks(pfdev);
panfrost_gpu_power_on(pfdev);
return 0;
--
2.25.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 3b8095169982ff4ec2a1b4be61b7224bbef23b48 ]
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit
f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC
panel") has fixed the bus formats, but forgot to address the bpc value.
Set it to 6.
Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel")
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panel/panel-simple.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 85fa4027d82d7..4b4ca31a2d577 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2862,7 +2862,7 @@ static const struct drm_display_mode ortustech_com43h4m85ulc_mode = {
static const struct panel_desc ortustech_com43h4m85ulc = {
.modes = &ortustech_com43h4m85ulc_mode,
.num_modes = 1,
- .bpc = 8,
+ .bpc = 6,
.size = {
.width = 56,
.height = 93,
--
2.25.1
From: Tianjia Zhang <[email protected]>
[ Upstream commit 44f4daf8678ae5f08c93bbe70792f90cd88e4649 ]
On an error exit path, a negative error code should be returned instead of
a positive return value.
Link: https://lore.kernel.org/r/[email protected]
Fixes: f40e74ffa3de ("csiostor:firmware upgrade fix")
Cc: Praveen Madhavan <[email protected]>
Signed-off-by: Tianjia Zhang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/csiostor/csio_hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index 950f9cdf0577f..5d0f42031d121 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -2384,7 +2384,7 @@ static int csio_hw_prep_fw(struct csio_hw *hw, struct fw_info *fw_info,
FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c),
FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
- ret = EINVAL;
+ ret = -EINVAL;
goto bye;
}
--
2.25.1
From: Tom Rix <[email protected]>
[ Upstream commit 7e8453e35e406981d7c529ff8f804285bc894ba3 ]
clang static analyzer reports this problem
mac.c:6204:2: warning: Attempt to free released memory
kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The channels pointer is allocated in ath11k_mac_setup_channels_rates()
When it fails midway, it cleans up the memory it has already allocated.
So the error handling needs to skip freeing the memory.
There is a second problem.
ath11k_mac_setup_channels_rates(), allocates 3 channels. err_free
misses releasing ar->mac.sbands[NL80211_BAND_6GHZ].channels
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 2836a0f197ab0..fc5be7e8c043e 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5824,7 +5824,7 @@ static int __ath11k_mac_register(struct ath11k *ar)
ret = ath11k_mac_setup_channels_rates(ar,
cap->supported_bands);
if (ret)
- goto err_free;
+ goto err;
ath11k_mac_setup_ht_vht_cap(ar, cap, &ht_cap);
ath11k_mac_setup_he_cap(ar, cap);
@@ -5938,7 +5938,9 @@ static int __ath11k_mac_register(struct ath11k *ar)
err_free:
kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels);
+ kfree(ar->mac.sbands[NL80211_BAND_6GHZ].channels);
+err:
SET_IEEE80211_DEV(ar->hw, NULL);
return ret;
}
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit 88f50a05f907d96a27a9ce3cc9e8cbb91a6f0f22 ]
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not
called in error handling paths. Thus replace the jump target
"err_release_buffers" by "err_pm_putw".
Fixes: 152e0bf60219 ("media: stm32-dcmi: add power saving support")
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/stm32/stm32-dcmi.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index b8931490b83b7..fd1c41cba52fc 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -733,7 +733,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
if (ret < 0) {
dev_err(dcmi->dev, "%s: Failed to start streaming, cannot get sync (%d)\n",
__func__, ret);
- goto err_release_buffers;
+ goto err_pm_put;
}
ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
@@ -837,8 +837,6 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
err_pm_put:
pm_runtime_put(dcmi->dev);
-
-err_release_buffers:
spin_lock_irq(&dcmi->irqlock);
/*
* Return all buffers to vb2 in QUEUED state.
--
2.25.1
From: Tianjia Zhang <[email protected]>
[ Upstream commit c35376137e940c3389df2726a92649c01a9844b4 ]
On an error exit path, a negative error code should be returned
instead of a positive return value.
Fixes: 9e869063b0021 ("drm/amd/display: Move iteration out of dm_update_planes")
Cc: Leo Li <[email protected]>
Signed-off-by: Tianjia Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 7c1cc0ba30a55..78cf9e4fddbdf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -8178,8 +8178,7 @@ static int dm_update_plane_state(struct dc *dc,
dm_old_plane_state->dc_state,
dm_state->context)) {
- ret = EINVAL;
- return ret;
+ return -EINVAL;
}
--
2.25.1
From: Qu Wenruo <[email protected]>
[ Upstream commit 154f7cb86809a3a796bffbc7a5a7ce0dee585eaa ]
Commit 1c11b63eff2a ("btrfs: replace pending/pinned chunks lists with io
tree") introduced btrfs_device::alloc_state extent io tree, but it
doesn't initialize the fs_info and owner member.
This means the following features are not properly supported:
- Fs owner report for insert_state() error
Without fs_info initialized, although btrfs_err() won't panic, it
won't output which fs is causing the error.
- Wrong owner for trace events
alloc_state will get the owner as pinned extents.
Fix this by assiging proper fs_info and owner for
btrfs_device::alloc_state.
Fixes: 1c11b63eff2a ("btrfs: replace pending/pinned chunks lists with io tree")
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/extent-io-tree.h | 1 +
fs/btrfs/volumes.c | 7 ++++---
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/extent-io-tree.h b/fs/btrfs/extent-io-tree.h
index 8bbb734f3f514..49384d55a908f 100644
--- a/fs/btrfs/extent-io-tree.h
+++ b/fs/btrfs/extent-io-tree.h
@@ -48,6 +48,7 @@ enum {
IO_TREE_INODE_FILE_EXTENT,
IO_TREE_LOG_CSUM_RANGE,
IO_TREE_SELFTEST,
+ IO_TREE_DEVICE_ALLOC_STATE,
};
struct extent_io_tree {
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 79e9a80bd37a0..f9d8bd3099488 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -406,7 +406,7 @@ void __exit btrfs_cleanup_fs_uuids(void)
* Returned struct is not linked onto any lists and must be destroyed using
* btrfs_free_device.
*/
-static struct btrfs_device *__alloc_device(void)
+static struct btrfs_device *__alloc_device(struct btrfs_fs_info *fs_info)
{
struct btrfs_device *dev;
@@ -433,7 +433,8 @@ static struct btrfs_device *__alloc_device(void)
btrfs_device_data_ordered_init(dev);
INIT_RADIX_TREE(&dev->reada_zones, GFP_NOFS & ~__GFP_DIRECT_RECLAIM);
INIT_RADIX_TREE(&dev->reada_extents, GFP_NOFS & ~__GFP_DIRECT_RECLAIM);
- extent_io_tree_init(NULL, &dev->alloc_state, 0, NULL);
+ extent_io_tree_init(fs_info, &dev->alloc_state,
+ IO_TREE_DEVICE_ALLOC_STATE, NULL);
return dev;
}
@@ -6545,7 +6546,7 @@ struct btrfs_device *btrfs_alloc_device(struct btrfs_fs_info *fs_info,
if (WARN_ON(!devid && !fs_info))
return ERR_PTR(-EINVAL);
- dev = __alloc_device();
+ dev = __alloc_device(fs_info);
if (IS_ERR(dev))
return dev;
--
2.25.1
From: Serge Semin <[email protected]>
[ Upstream commit 0ffd21d5985506d164ada9e8fff6daae8ef469a1 ]
If the PVT sensor is suddenly powered down while a caller is waiting for
the conversion completion, the request won't be finished and the task will
hang up on this procedure until the power is back up again. Let's call the
wait_for_completion_timeout() method instead to prevent that. The cached
timeout is exactly what we need to predict for how long conversion could
normally last.
Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver")
Signed-off-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/bt1-pvt.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/bt1-pvt.c b/drivers/hwmon/bt1-pvt.c
index 2600426a3b21c..3e1d56585b91a 100644
--- a/drivers/hwmon/bt1-pvt.c
+++ b/drivers/hwmon/bt1-pvt.c
@@ -477,6 +477,7 @@ static int pvt_read_data(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
long *val)
{
struct pvt_cache *cache = &pvt->cache[type];
+ unsigned long timeout;
u32 data;
int ret;
@@ -500,7 +501,14 @@ static int pvt_read_data(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID, 0);
pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, PVT_CTRL_EN);
- wait_for_completion(&cache->conversion);
+ /*
+ * Wait with timeout since in case if the sensor is suddenly powered
+ * down the request won't be completed and the caller will hang up on
+ * this procedure until the power is back up again. Multiply the
+ * timeout by the factor of two to prevent a false timeout.
+ */
+ timeout = 2 * usecs_to_jiffies(ktime_to_us(pvt->timeout));
+ ret = wait_for_completion_timeout(&cache->conversion, timeout);
pvt_update(pvt->regs + PVT_CTRL, PVT_CTRL_EN, 0);
pvt_update(pvt->regs + PVT_INTR_MASK, PVT_INTR_DVALID,
@@ -510,6 +518,9 @@ static int pvt_read_data(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
mutex_unlock(&pvt->iface_mtx);
+ if (!ret)
+ return -ETIMEDOUT;
+
if (type == PVT_TEMP)
*val = pvt_calc_poly(&poly_N_to_temp, data);
else
--
2.25.1
From: Melissa Wen <[email protected]>
[ Upstream commit 0986191186128b10b6bbfa5220fc587ed5725e49 ]
The previous memset operation was not correctly zeroing the alpha
channel to compute the crc, and as a result, the IGT subtest
kms_cursor_crc/pipe-A-cursor-alpha-transparent fails.
Fixes: db7f419c06d7c ("drm/vkms: Compute CRC with Cursor Plane")
Signed-off-by: Melissa Wen <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vkms/vkms_composer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vkms/vkms_composer.c b/drivers/gpu/drm/vkms/vkms_composer.c
index 4af2f19480f4f..b8b060354667e 100644
--- a/drivers/gpu/drm/vkms/vkms_composer.c
+++ b/drivers/gpu/drm/vkms/vkms_composer.c
@@ -33,7 +33,7 @@ static uint32_t compute_crc(void *vaddr_out, struct vkms_composer *composer)
+ (i * composer->pitch)
+ (j * composer->cpp);
/* XRGB format ignores Alpha channel */
- memset(vaddr_out + src_offset + 24, 0, 8);
+ bitmap_clear(vaddr_out + src_offset, 24, 8);
crc = crc32_le(crc, vaddr_out + src_offset,
sizeof(u32));
}
--
2.25.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit d6834b4b58d110814aaf3469e7fd87d34ae5ae81 ]
The media controller core prints a warning when an entity is registered
without a function being set. This affects the uvcvideo driver, as the
warning was added without first addressing the issue in existing
drivers. The problem is harmless, but unnecessarily worries users. Fix
it by mapping UVC entity types to MC entity functions as accurately as
possible using the existing functions.
Fixes: b50bde4e476d ("[media] v4l2-subdev: use MEDIA_ENT_T_UNKNOWN for new subdevs")
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_entity.c | 35 ++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_entity.c b/drivers/media/usb/uvc/uvc_entity.c
index b4499cddeffe5..ca3a9c2eec271 100644
--- a/drivers/media/usb/uvc/uvc_entity.c
+++ b/drivers/media/usb/uvc/uvc_entity.c
@@ -73,10 +73,45 @@ static int uvc_mc_init_entity(struct uvc_video_chain *chain,
int ret;
if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) {
+ u32 function;
+
v4l2_subdev_init(&entity->subdev, &uvc_subdev_ops);
strscpy(entity->subdev.name, entity->name,
sizeof(entity->subdev.name));
+ switch (UVC_ENTITY_TYPE(entity)) {
+ case UVC_VC_SELECTOR_UNIT:
+ function = MEDIA_ENT_F_VID_MUX;
+ break;
+ case UVC_VC_PROCESSING_UNIT:
+ case UVC_VC_EXTENSION_UNIT:
+ /* For lack of a better option. */
+ function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+ break;
+ case UVC_COMPOSITE_CONNECTOR:
+ case UVC_COMPONENT_CONNECTOR:
+ function = MEDIA_ENT_F_CONN_COMPOSITE;
+ break;
+ case UVC_SVIDEO_CONNECTOR:
+ function = MEDIA_ENT_F_CONN_SVIDEO;
+ break;
+ case UVC_ITT_CAMERA:
+ function = MEDIA_ENT_F_CAM_SENSOR;
+ break;
+ case UVC_TT_VENDOR_SPECIFIC:
+ case UVC_ITT_VENDOR_SPECIFIC:
+ case UVC_ITT_MEDIA_TRANSPORT_INPUT:
+ case UVC_OTT_VENDOR_SPECIFIC:
+ case UVC_OTT_DISPLAY:
+ case UVC_OTT_MEDIA_TRANSPORT_OUTPUT:
+ case UVC_EXTERNAL_VENDOR_SPECIFIC:
+ default:
+ function = MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN;
+ break;
+ }
+
+ entity->subdev.entity.function = function;
+
ret = media_entity_pads_init(&entity->subdev.entity,
entity->num_pads, entity->pads);
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 08913a8e458e03f886a1a1154a6501fcb9344c39 ]
The intent here is to reset the whole 'scaler_coeffs_luma' array, not just
the first element.
Fixes: e11110a5b744 ("media: staging/intel-ipu3: css: Compute and program ccs")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Bingbu Cao <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/ipu3/ipu3-css-params.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/ipu3/ipu3-css-params.c b/drivers/staging/media/ipu3/ipu3-css-params.c
index fbd53d7c097cd..e9d6bd9e9332a 100644
--- a/drivers/staging/media/ipu3/ipu3-css-params.c
+++ b/drivers/staging/media/ipu3/ipu3-css-params.c
@@ -159,7 +159,7 @@ imgu_css_scaler_calc(u32 input_width, u32 input_height, u32 target_width,
memset(&cfg->scaler_coeffs_chroma, 0,
sizeof(cfg->scaler_coeffs_chroma));
- memset(&cfg->scaler_coeffs_luma, 0, sizeof(*cfg->scaler_coeffs_luma));
+ memset(&cfg->scaler_coeffs_luma, 0, sizeof(cfg->scaler_coeffs_luma));
do {
phase_step_correction++;
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit 63e36a381d92a9cded97e90d481ee22566557dd1 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Fixes: 6eaafbdb668b ("[media] v4l: rcar-fcp: Keep the coding style consistent")
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar-fcp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/rcar-fcp.c b/drivers/media/platform/rcar-fcp.c
index 5c6b00737fe75..05c712e00a2a7 100644
--- a/drivers/media/platform/rcar-fcp.c
+++ b/drivers/media/platform/rcar-fcp.c
@@ -103,8 +103,10 @@ int rcar_fcp_enable(struct rcar_fcp_device *fcp)
return 0;
ret = pm_runtime_get_sync(fcp->dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_noidle(fcp->dev);
return ret;
+ }
return 0;
}
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit 884d638e0853c4b5f01eb6d048fc3b6239012404 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus call pm_runtime_put_noidle()
if pm_runtime_get_sync() fails.
Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Qiushi Wu <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rockchip/rga/rga-buf.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/platform/rockchip/rga/rga-buf.c b/drivers/media/platform/rockchip/rga/rga-buf.c
index 36b821ccc1dba..bf9a75b75083b 100644
--- a/drivers/media/platform/rockchip/rga/rga-buf.c
+++ b/drivers/media/platform/rockchip/rga/rga-buf.c
@@ -81,6 +81,7 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
ret = pm_runtime_get_sync(rga->dev);
if (ret < 0) {
+ pm_runtime_put_noidle(rga->dev);
rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
return ret;
}
--
2.25.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 171994e498a0426cbe17f874c5c6af3c0af45200 ]
UBSAN reports a shift-out-of-bounds warning in uvc_get_le_value(). The
report is correct, but the issue should be harmless as the computed
value isn't used when the shift is negative. This may however cause
incorrect behaviour if a negative shift could generate adverse side
effects (such as a trap on some architectures for instance).
Regardless of whether that may happen or not, silence the warning as a
full WARN backtrace isn't nice.
Reported-by: Bart Van Assche <[email protected]>
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Tested-by: Bart Van Assche <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_ctrl.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index e399b9fad7574..a30a8a731eda8 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -773,12 +773,16 @@ static s32 uvc_get_le_value(struct uvc_control_mapping *mapping,
offset &= 7;
mask = ((1LL << bits) - 1) << offset;
- for (; bits > 0; data++) {
+ while (1) {
u8 byte = *data & mask;
value |= offset > 0 ? (byte >> offset) : (byte << (-offset));
bits -= 8 - (offset > 0 ? offset : 0);
+ if (bits <= 0)
+ break;
+
offset -= 8;
mask = (1 << bits) - 1;
+ data++;
}
/* Sign-extend the value if needed. */
--
2.25.1
From: Qiushi Wu <[email protected]>
[ Upstream commit aaffa0126a111d65f4028c503c76192d4cc93277 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus call pm_runtime_put_noidle()
if pm_runtime_get_sync() fails.
Fixes: 90dedce9bc54 ("media: rcar-vin: add function to manipulate Gen3 chsel value")
Signed-off-by: Qiushi Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-dma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 1a30cd0363711..95bc9e0e87926 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -1392,8 +1392,10 @@ int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel)
int ret;
ret = pm_runtime_get_sync(vin->dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_noidle(vin->dev);
return ret;
+ }
/* Make register writes take effect immediately. */
vnmc = rvin_read(vin, VNMC_REG);
--
2.25.1
From: Paul Kocialkowski <[email protected]>
[ Upstream commit 4c85f628f6639e3e3e0a7788416154f28dfcae4f ]
Although the code is correct and doing the right thing, the clock diagram
showed the wrong register for the bit divider, which had me doubting the
understanding of the tree. Fix this to avoid doubts in the future.
Signed-off-by: Paul Kocialkowski <[email protected]>
Fixes: aa2882481cada ("media: ov5640: Adjust the clock based on the expected rate")
Acked-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov5640.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 2fe4a7ac05929..ab19e04720d3a 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -751,7 +751,7 @@ static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg,
* +->| PLL Root Div | - reg 0x3037, bit 4
* +-+------------+
* | +---------+
- * +->| Bit Div | - reg 0x3035, bits 0-3
+ * +->| Bit Div | - reg 0x3034, bits 0-3
* +-+-------+
* | +-------------+
* +->| SCLK Div | - reg 0x3108, bits 0-1
--
2.25.1
From: Jay Fang <[email protected]>
[ Upstream commit 9599f341889c87e56bb944659c32490d05e2532f ]
Free previously allocated IRQs when return an error code of desc->setup()
which is not always successful. And simplify the code by adding a goto
label.
Fixes: 8f5c285f3ef5 ("SPI: designware: pci: Switch over to MSI interrupts")
CC: Felipe Balbi <[email protected]>
Signed-off-by: Jay Fang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-dw-pci.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index 2ea73809ca345..271839a8add0e 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -127,18 +127,16 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (desc->setup) {
ret = desc->setup(dws);
if (ret)
- return ret;
+ goto err_free_irq_vectors;
}
} else {
- pci_free_irq_vectors(pdev);
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_free_irq_vectors;
}
ret = dw_spi_add_host(&pdev->dev, dws);
- if (ret) {
- pci_free_irq_vectors(pdev);
- return ret;
- }
+ if (ret)
+ goto err_free_irq_vectors;
/* PCI hook and SPI hook use the same drv data */
pci_set_drvdata(pdev, dws);
@@ -152,6 +150,10 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pm_runtime_allow(&pdev->dev);
return 0;
+
+err_free_irq_vectors:
+ pci_free_irq_vectors(pdev);
+ return ret;
}
static void spi_pci_remove(struct pci_dev *pdev)
--
2.25.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 468e986dac0e94194334ca6d0abf3af8c250792e ]
v4l2_async_notifier_add_subdev() requires the asd to be allocated
dynamically, but the rcar-drif driver embeds it in the
rcar_drif_graph_ep structure. This causes memory corruption when the
notifier is destroyed at remove time with v4l2_async_notifier_cleanup().
Fix this issue by registering the asd with
v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically
internally.
Fixes: d079f94c9046 ("media: platform: Switch to v4l2_async_notifier_add_subdev")
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar_drif.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/media/platform/rcar_drif.c b/drivers/media/platform/rcar_drif.c
index 3f1e5cb8b1976..f318cd4b8086f 100644
--- a/drivers/media/platform/rcar_drif.c
+++ b/drivers/media/platform/rcar_drif.c
@@ -185,7 +185,6 @@ struct rcar_drif_frame_buf {
/* OF graph endpoint's V4L2 async data */
struct rcar_drif_graph_ep {
struct v4l2_subdev *subdev; /* Async matched subdev */
- struct v4l2_async_subdev asd; /* Async sub-device descriptor */
};
/* DMA buffer */
@@ -1109,12 +1108,6 @@ static int rcar_drif_notify_bound(struct v4l2_async_notifier *notifier,
struct rcar_drif_sdr *sdr =
container_of(notifier, struct rcar_drif_sdr, notifier);
- if (sdr->ep.asd.match.fwnode !=
- of_fwnode_handle(subdev->dev->of_node)) {
- rdrif_err(sdr, "subdev %s cannot bind\n", subdev->name);
- return -EINVAL;
- }
-
v4l2_set_subdev_hostdata(subdev, sdr);
sdr->ep.subdev = subdev;
rdrif_dbg(sdr, "bound asd %s\n", subdev->name);
@@ -1218,7 +1211,7 @@ static int rcar_drif_parse_subdevs(struct rcar_drif_sdr *sdr)
{
struct v4l2_async_notifier *notifier = &sdr->notifier;
struct fwnode_handle *fwnode, *ep;
- int ret;
+ struct v4l2_async_subdev *asd;
v4l2_async_notifier_init(notifier);
@@ -1237,12 +1230,13 @@ static int rcar_drif_parse_subdevs(struct rcar_drif_sdr *sdr)
return -EINVAL;
}
- sdr->ep.asd.match.fwnode = fwnode;
- sdr->ep.asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
- ret = v4l2_async_notifier_add_subdev(notifier, &sdr->ep.asd);
+ asd = v4l2_async_notifier_add_fwnode_subdev(notifier, fwnode,
+ sizeof(*asd));
fwnode_handle_put(fwnode);
+ if (IS_ERR(asd))
+ return PTR_ERR(asd);
- return ret;
+ return 0;
}
/* Check if the given device is the primary bond */
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit d8fc21c17099635e8ebd986d042be65a6c6b5bd0 ]
When devm_ioremap_resource() fails, isp should be
freed just like other error paths in isp_probe.
Fixes: 8644cdf972dd6 ("[media] omap3isp: Replace many MMIO regions by two")
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/omap3isp/isp.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index b91e472ee764e..de066757726de 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -2328,8 +2328,10 @@ static int isp_probe(struct platform_device *pdev)
mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
isp->mmio_base[map_idx] =
devm_ioremap_resource(isp->dev, mem);
- if (IS_ERR(isp->mmio_base[map_idx]))
- return PTR_ERR(isp->mmio_base[map_idx]);
+ if (IS_ERR(isp->mmio_base[map_idx])) {
+ ret = PTR_ERR(isp->mmio_base[map_idx]);
+ goto error;
+ }
}
ret = isp_get_clocks(isp);
--
2.25.1
From: Sylwester Nawrocki <[email protected]>
[ Upstream commit 00d21f325d58567d81d9172096692d0a9ea7f725 ]
The "idle" pinctrl state is optional as documented in the DT binding.
The change introduced by the commit being reverted makes that pinctrl state
mandatory and breaks initialization of the whole media driver, since the
"idle" state is not specified in any mainline dts.
This reverts commit 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")
to fix the regression.
Fixes: 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/exynos4-is/media-dev.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 9c31d950cddf7..2f90607c3797d 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1268,11 +1268,9 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
if (IS_ERR(pctl->state_default))
return PTR_ERR(pctl->state_default);
+ /* PINCTRL_STATE_IDLE is optional */
pctl->state_idle = pinctrl_lookup_state(pctl->pinctrl,
PINCTRL_STATE_IDLE);
- if (IS_ERR(pctl->state_idle))
- return PTR_ERR(pctl->state_idle);
-
return 0;
}
--
2.25.1
From: Luca Stefani <[email protected]>
[ Upstream commit 85e6084e0b436cabe9c909e679937998ffbf9c9d ]
late_initcall() expects a function that returns an integer. Update the
function signature to match.
[ bp: Massage commit message into proper sentences. ]
Fixes: 9554bfe403bd ("x86/mce: Convert the CEC to use the MCE notifier")
Signed-off-by: Luca Stefani <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Tested-by: Sami Tolvanen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ras/cec.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/ras/cec.c b/drivers/ras/cec.c
index 569d9ad2c5942..6939aa5b3dc7f 100644
--- a/drivers/ras/cec.c
+++ b/drivers/ras/cec.c
@@ -553,20 +553,20 @@ static struct notifier_block cec_nb = {
.priority = MCE_PRIO_CEC,
};
-static void __init cec_init(void)
+static int __init cec_init(void)
{
if (ce_arr.disabled)
- return;
+ return -ENODEV;
ce_arr.array = (void *)get_zeroed_page(GFP_KERNEL);
if (!ce_arr.array) {
pr_err("Error allocating CE array page!\n");
- return;
+ return -ENOMEM;
}
if (create_debugfs_nodes()) {
free_page((unsigned long)ce_arr.array);
- return;
+ return -ENOMEM;
}
INIT_DELAYED_WORK(&cec_work, cec_work_fn);
@@ -575,6 +575,7 @@ static void __init cec_init(void)
mce_register_decode_chain(&cec_nb);
pr_info("Correctable Errors collector initialized.\n");
+ return 0;
}
late_initcall(cec_init);
--
2.25.1
From: Xiaoliang Pang <[email protected]>
[ Upstream commit 228d284aac61283cde508a925d666f854b57af63 ]
In the init loop, if an error occurs in function 'dma_alloc_coherent',
then goto the err_cleanup section, after run i--,
in the array ring, the struct mtk_ring with index i will not be released,
causing memory leaks
Fixes: 785e5c616c849 ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Cc: Ryder Lee <[email protected]>
Signed-off-by: Xiaoliang Pang <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/mediatek/mtk-platform.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/mediatek/mtk-platform.c b/drivers/crypto/mediatek/mtk-platform.c
index ef4339e84d034..efce3a83b35a8 100644
--- a/drivers/crypto/mediatek/mtk-platform.c
+++ b/drivers/crypto/mediatek/mtk-platform.c
@@ -469,13 +469,13 @@ static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
return 0;
err_cleanup:
- for (; i--; ) {
+ do {
dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ,
ring[i]->res_base, ring[i]->res_dma);
dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ,
ring[i]->cmd_base, ring[i]->cmd_dma);
kfree(ring[i]);
- }
+ } while (i--);
return -ENOMEM;
}
--
2.25.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 18360b33a071e5883250fd1e04bfdeff8c3887a3 ]
Smatch has a new check for resource leaks which found a bug in probe:
drivers/hwmon/w83627ehf.c:2417 w83627ehf_probe()
warn: 'res->start' not released on lines: 2412.
We need to clean up if devm_hwmon_device_register_with_info() fails.
Fixes: 266cd5835947 ("hwmon: (w83627ehf) convert to with_info interface")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Link: https://lore.kernel.org/r/20200921125212.GA1128194@mwanda
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/w83627ehf.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 5a5120121e507..3964ceab2817c 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1951,8 +1951,12 @@ static int w83627ehf_probe(struct platform_device *pdev)
data,
&w83627ehf_chip_info,
w83627ehf_groups);
+ if (IS_ERR(hwmon_dev)) {
+ err = PTR_ERR(hwmon_dev);
+ goto exit_release;
+ }
- return PTR_ERR_OR_ZERO(hwmon_dev);
+ return 0;
exit_release:
release_region(res->start, IOREGION_LENGTH);
--
2.25.1
From: Ezequiel Garcia <[email protected]>
[ Upstream commit 6d9e8cd0553bb03e8ab9d4d2d7d17f3fb639bd86 ]
If the bitstream and the application are incorrectly configuring
the reference pictures, the hardware will need to fallback
to using some other reference picture.
When the post-processor is enabled, the fallback buffer
should be a shadow buffer (postproc.dec_q), and not a
CAPTURE queue buffer, since the latter is post-processed
and not really the output of the decoder core.
Fixes: 8c2d66b036c77 ("media: hantro: Support color conversion via post-processing")
Signed-off-by: Ezequiel Garcia <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/hantro/hantro_h264.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/hantro/hantro_h264.c b/drivers/staging/media/hantro/hantro_h264.c
index d561f125085a7..d72ebbd17a692 100644
--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -327,7 +327,7 @@ dma_addr_t hantro_h264_get_ref_buf(struct hantro_ctx *ctx,
*/
dst_buf = hantro_get_dst_buf(ctx);
buf = &dst_buf->vb2_buf;
- dma_addr = vb2_dma_contig_plane_dma_addr(buf, 0);
+ dma_addr = hantro_get_dec_buf_addr(ctx, buf);
}
return dma_addr;
--
2.25.1
From: Tom Rix <[email protected]>
[ Upstream commit 274cf92d5dff5c2fec1a518078542ffe70d07646 ]
clang static analysis flags this error
tc358743.c:1468:9: warning: Branch condition evaluates
to a garbage value
return handled ? IRQ_HANDLED : IRQ_NONE;
^~~~~~~
handled should be initialized to false.
Fixes: d747b806abf4 ("[media] tc358743: add direct interrupt handling")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/tc358743.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index dbbab75f135ec..211caade9f998 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -1461,7 +1461,7 @@ static int tc358743_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
static irqreturn_t tc358743_irq_handler(int irq, void *dev_id)
{
struct tc358743_state *state = dev_id;
- bool handled;
+ bool handled = false;
tc358743_isr(&state->sd, 0, &handled);
--
2.25.1
From: Peilin Ye <[email protected]>
[ Upstream commit e3158a5e7e661786b3ab650c7e4d21024e8eff0f ]
vivid_meta_out_process() is setting `brightness`, `contrast`, `saturation`
and `hue` using tpg_s_*(). This is wrong, since tpg_s_*() do not provide
range checks. Using tpg_s_*() here also makes the control framework
out-of-sync with the actual values. Use v4l2_ctrl_s_ctrl() instead.
This issue has been reported by syzbot as an out-of-bounds read bug in
precalculate_color().
Reported-and-tested-by: [email protected]
Link: https://syzkaller.appspot.com/bug?extid=02d9172bf4c43104cd70
Fixes: 746facd39370 ("media: vivid: Add metadata output support")
Suggested-by: Hans Verkuil <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/test-drivers/vivid/vivid-meta-out.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/media/test-drivers/vivid/vivid-meta-out.c b/drivers/media/test-drivers/vivid/vivid-meta-out.c
index ff8a039aba72e..95835b52b58fc 100644
--- a/drivers/media/test-drivers/vivid/vivid-meta-out.c
+++ b/drivers/media/test-drivers/vivid/vivid-meta-out.c
@@ -164,10 +164,11 @@ void vivid_meta_out_process(struct vivid_dev *dev,
{
struct vivid_meta_out_buf *meta = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
- tpg_s_brightness(&dev->tpg, meta->brightness);
- tpg_s_contrast(&dev->tpg, meta->contrast);
- tpg_s_saturation(&dev->tpg, meta->saturation);
- tpg_s_hue(&dev->tpg, meta->hue);
+ v4l2_ctrl_s_ctrl(dev->brightness, meta->brightness);
+ v4l2_ctrl_s_ctrl(dev->contrast, meta->contrast);
+ v4l2_ctrl_s_ctrl(dev->saturation, meta->saturation);
+ v4l2_ctrl_s_ctrl(dev->hue, meta->hue);
+
dprintk(dev, 2, " %s brightness %u contrast %u saturation %u hue %d\n",
__func__, meta->brightness, meta->contrast,
meta->saturation, meta->hue);
--
2.25.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit bbf2cb1ea1e1428589d7f4d652bed15b265ce92d ]
If STM32 CRC device is already in use, calculate CRC by software.
This will release CPU constraint for a concurrent access to the
hardware, and avoid masking irqs during the whole block processing.
Fixes: 7795c0baf5ac ("crypto: stm32/crc32 - protect from concurrent accesses")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/Kconfig | 1 +
drivers/crypto/stm32/stm32-crc32.c | 15 ++++++++++++---
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig
index 4ef3eb11361c2..4a4c3284ae1f3 100644
--- a/drivers/crypto/stm32/Kconfig
+++ b/drivers/crypto/stm32/Kconfig
@@ -3,6 +3,7 @@ config CRYPTO_DEV_STM32_CRC
tristate "Support for STM32 crc accelerators"
depends on ARCH_STM32
select CRYPTO_HASH
+ select CRC32
help
This enables support for the CRC32 hw accelerator which can be found
on STMicroelectronics STM32 SOC.
diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c
index 3ba41148c2a46..2c13f5214d2cf 100644
--- a/drivers/crypto/stm32/stm32-crc32.c
+++ b/drivers/crypto/stm32/stm32-crc32.c
@@ -6,6 +6,7 @@
#include <linux/bitrev.h>
#include <linux/clk.h>
+#include <linux/crc32.h>
#include <linux/crc32poly.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
@@ -147,7 +148,6 @@ static int burst_update(struct shash_desc *desc, const u8 *d8,
struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
struct stm32_crc *crc;
- unsigned long flags;
crc = stm32_crc_get_next_crc();
if (!crc)
@@ -155,7 +155,15 @@ static int burst_update(struct shash_desc *desc, const u8 *d8,
pm_runtime_get_sync(crc->dev);
- spin_lock_irqsave(&crc->lock, flags);
+ if (!spin_trylock(&crc->lock)) {
+ /* Hardware is busy, calculate crc32 by software */
+ if (mctx->poly == CRC32_POLY_LE)
+ ctx->partial = crc32_le(ctx->partial, d8, length);
+ else
+ ctx->partial = __crc32c_le(ctx->partial, d8, length);
+
+ goto pm_out;
+ }
/*
* Restore previously calculated CRC for this context as init value
@@ -195,8 +203,9 @@ static int burst_update(struct shash_desc *desc, const u8 *d8,
/* Store partial result */
ctx->partial = readl_relaxed(crc->regs + CRC_DR);
- spin_unlock_irqrestore(&crc->lock, flags);
+ spin_unlock(&crc->lock);
+pm_out:
pm_runtime_mark_last_busy(crc->dev);
pm_runtime_put_autosuspend(crc->dev);
--
2.25.1
From: Tero Kristo <[email protected]>
[ Upstream commit 3faf757bad75f3fc1b2736f0431e295a073a7423 ]
Running export/import for hashes in peculiar order (mostly done by
openssl) can mess up the internal book keeping of the OMAP SHA core.
Fix by forcibly writing the correct DIGCNT back to hardware. This issue
was noticed while transitioning to openssl 1.1 support.
Fixes: 0d373d603202 ("crypto: omap-sham - Add OMAP4/AM33XX SHAM Support")
Signed-off-by: Tero Kristo <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/omap-sham.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 82691a057d2a1..bc956dfb34de6 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -456,6 +456,9 @@ static void omap_sham_write_ctrl_omap4(struct omap_sham_dev *dd, size_t length,
struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req);
u32 val, mask;
+ if (likely(ctx->digcnt))
+ omap_sham_write(dd, SHA_REG_DIGCNT(dd), ctx->digcnt);
+
/*
* Setting ALGO_CONST only for the first iteration and
* CLOSE_HASH only for the last one. Note that flags mode bits
--
2.25.1
From: Brad Bishop <[email protected]>
[ Upstream commit 2b3cef0fc757bd06ed9b83bd4c436bfa55f47370 ]
The trailing <len> - 8 bytes of transfer data in this size range is no
longer ignored.
Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Brad Bishop <[email protected]>
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c
index 37a3e0f8e7526..8f64af0140e09 100644
--- a/drivers/spi/spi-fsi.c
+++ b/drivers/spi/spi-fsi.c
@@ -258,15 +258,15 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
if (loops > 1) {
fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
- if (rem)
- fsi_spi_sequence_add(seq, rem);
-
rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG,
SPI_FSI_COUNTER_CFG_LOOPS(loops - 1));
if (rc)
return rc;
}
+ if (rem)
+ fsi_spi_sequence_add(seq, rem);
+
return 0;
}
--
2.25.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit afce6996943be265fa39240b67025cfcb1bcdfb1 ]
platform_get_irq() returns a negative error number on error. In such a
case, comparison to 0 would pass the check therefore check the return
value properly, whether it is negative.
[ bp: Massage commit message. ]
Fixes: 9b7e6242ee4e ("EDAC, aspeed: Add an Aspeed AST2500 EDAC driver")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Stefan Schaeckeler <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/edac/aspeed_edac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/edac/aspeed_edac.c b/drivers/edac/aspeed_edac.c
index b194658b8b5c9..fbec28dc661d7 100644
--- a/drivers/edac/aspeed_edac.c
+++ b/drivers/edac/aspeed_edac.c
@@ -209,8 +209,8 @@ static int config_irq(void *ctx, struct platform_device *pdev)
/* register interrupt handler */
irq = platform_get_irq(pdev, 0);
dev_dbg(&pdev->dev, "got irq %d\n", irq);
- if (!irq)
- return -ENODEV;
+ if (irq < 0)
+ return irq;
rc = devm_request_irq(&pdev->dev, irq, mcr_isr, IRQF_TRIGGER_HIGH,
DRV_NAME, ctx);
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit f7ade9aaf66bd5599690acf0597df2c0f6cd825a ]
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()', in 'setup_crypt_desc()'.
Fixes: 81bef0150074 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ixp4xx_crypto.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index ad73fc9466821..3be6e0db0f9fc 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -528,7 +528,7 @@ static void release_ixp_crypto(struct device *dev)
if (crypt_virt) {
dma_free_coherent(dev,
- NPE_QLEN_TOTAL * sizeof( struct crypt_ctl),
+ NPE_QLEN * sizeof(struct crypt_ctl),
crypt_virt, crypt_phys);
}
}
--
2.25.1
From: Andrei Botila <[email protected]>
commit 83e8aa9121380b23ebae6e413962fa2a7b52cf92 upstream.
A hardware limitation exists for CAAM until Era 9 which restricts
the accelerator to IVs with only 8 bytes. When CAAM has a lower era
a fallback is necessary to process 16 bytes IV.
Fixes: b189817cf789 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Cc: <[email protected]> # v4.12+
Signed-off-by: Andrei Botila <[email protected]>
Reviewed-by: Horia Geantă <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/caam/Kconfig | 1
drivers/crypto/caam/caamalg_qi.c | 70 ++++++++++++++++++++++++++++++++++++---
2 files changed, 67 insertions(+), 4 deletions(-)
--- a/drivers/crypto/caam/Kconfig
+++ b/drivers/crypto/caam/Kconfig
@@ -114,6 +114,7 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
select CRYPTO_AUTHENC
select CRYPTO_SKCIPHER
select CRYPTO_DES
+ select CRYPTO_XTS
help
Selecting this will use CAAM Queue Interface (QI) for sending
& receiving crypto jobs to/from CAAM. This gives better performance
--- a/drivers/crypto/caam/caamalg_qi.c
+++ b/drivers/crypto/caam/caamalg_qi.c
@@ -18,6 +18,7 @@
#include "qi.h"
#include "jr.h"
#include "caamalg_desc.h"
+#include <asm/unaligned.h>
/*
* crypto alg
@@ -67,6 +68,11 @@ struct caam_ctx {
struct device *qidev;
spinlock_t lock; /* Protects multiple init of driver context */
struct caam_drv_ctx *drv_ctx[NUM_OP];
+ struct crypto_skcipher *fallback;
+};
+
+struct caam_skcipher_req_ctx {
+ struct skcipher_request fallback_req;
};
static int aead_set_sh_desc(struct crypto_aead *aead)
@@ -726,12 +732,17 @@ static int xts_skcipher_setkey(struct cr
struct caam_ctx *ctx = crypto_skcipher_ctx(skcipher);
struct device *jrdev = ctx->jrdev;
int ret = 0;
+ int err;
if (keylen != 2 * AES_MIN_KEY_SIZE && keylen != 2 * AES_MAX_KEY_SIZE) {
dev_dbg(jrdev, "key size mismatch\n");
return -EINVAL;
}
+ err = crypto_skcipher_setkey(ctx->fallback, key, keylen);
+ if (err)
+ return err;
+
ctx->cdata.keylen = keylen;
ctx->cdata.key_virt = key;
ctx->cdata.key_inline = true;
@@ -1373,6 +1384,14 @@ static struct skcipher_edesc *skcipher_e
return edesc;
}
+static inline bool xts_skcipher_ivsize(struct skcipher_request *req)
+{
+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req);
+ unsigned int ivsize = crypto_skcipher_ivsize(skcipher);
+
+ return !!get_unaligned((u64 *)(req->iv + (ivsize / 2)));
+}
+
static inline int skcipher_crypt(struct skcipher_request *req, bool encrypt)
{
struct skcipher_edesc *edesc;
@@ -1383,6 +1402,21 @@ static inline int skcipher_crypt(struct
if (!req->cryptlen)
return 0;
+ if (ctx->fallback && xts_skcipher_ivsize(req)) {
+ struct caam_skcipher_req_ctx *rctx = skcipher_request_ctx(req);
+
+ skcipher_request_set_tfm(&rctx->fallback_req, ctx->fallback);
+ skcipher_request_set_callback(&rctx->fallback_req,
+ req->base.flags,
+ req->base.complete,
+ req->base.data);
+ skcipher_request_set_crypt(&rctx->fallback_req, req->src,
+ req->dst, req->cryptlen, req->iv);
+
+ return encrypt ? crypto_skcipher_encrypt(&rctx->fallback_req) :
+ crypto_skcipher_decrypt(&rctx->fallback_req);
+ }
+
if (unlikely(caam_congested))
return -EAGAIN;
@@ -1507,6 +1541,7 @@ static struct caam_skcipher_alg driver_a
.base = {
.cra_name = "xts(aes)",
.cra_driver_name = "xts-aes-caam-qi",
+ .cra_flags = CRYPTO_ALG_NEED_FALLBACK,
.cra_blocksize = AES_BLOCK_SIZE,
},
.setkey = xts_skcipher_setkey,
@@ -2440,9 +2475,32 @@ static int caam_cra_init(struct crypto_s
struct skcipher_alg *alg = crypto_skcipher_alg(tfm);
struct caam_skcipher_alg *caam_alg =
container_of(alg, typeof(*caam_alg), skcipher);
+ struct caam_ctx *ctx = crypto_skcipher_ctx(tfm);
+ u32 alg_aai = caam_alg->caam.class1_alg_type & OP_ALG_AAI_MASK;
+ int ret = 0;
+
+ if (alg_aai == OP_ALG_AAI_XTS) {
+ const char *tfm_name = crypto_tfm_alg_name(&tfm->base);
+ struct crypto_skcipher *fallback;
+
+ fallback = crypto_alloc_skcipher(tfm_name, 0,
+ CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(fallback)) {
+ dev_err(ctx->jrdev, "Failed to allocate %s fallback: %ld\n",
+ tfm_name, PTR_ERR(fallback));
+ return PTR_ERR(fallback);
+ }
+
+ ctx->fallback = fallback;
+ crypto_skcipher_set_reqsize(tfm, sizeof(struct caam_skcipher_req_ctx) +
+ crypto_skcipher_reqsize(fallback));
+ }
+
+ ret = caam_init_common(ctx, &caam_alg->caam, false);
+ if (ret && ctx->fallback)
+ crypto_free_skcipher(ctx->fallback);
- return caam_init_common(crypto_skcipher_ctx(tfm), &caam_alg->caam,
- false);
+ return ret;
}
static int caam_aead_init(struct crypto_aead *tfm)
@@ -2468,7 +2526,11 @@ static void caam_exit_common(struct caam
static void caam_cra_exit(struct crypto_skcipher *tfm)
{
- caam_exit_common(crypto_skcipher_ctx(tfm));
+ struct caam_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+ if (ctx->fallback)
+ crypto_free_skcipher(ctx->fallback);
+ caam_exit_common(ctx);
}
static void caam_aead_exit(struct crypto_aead *tfm)
@@ -2502,7 +2564,7 @@ static void caam_skcipher_alg_init(struc
alg->base.cra_module = THIS_MODULE;
alg->base.cra_priority = CAAM_CRA_PRIORITY;
alg->base.cra_ctxsize = sizeof(struct caam_ctx);
- alg->base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY;
+ alg->base.cra_flags |= CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY;
alg->init = caam_cra_init;
alg->exit = caam_cra_exit;
From: Dinghao Liu <[email protected]>
[ Upstream commit 857a3139bd8be4f702c030c8ca06f3fd69c1741a ]
When pci_get_device_func() fails, the driver doesn't need to execute
pci_dev_put(). mci should still be freed, though, to prevent a memory
leak. When pci_enable_device() fails, the error injection PCI device
"einj" doesn't need to be disabled either.
[ bp: Massage commit message, rename label to "bail_mc_free". ]
Fixes: 52608ba205461 ("i5100_edac: probe for device 19 function 0")
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/edac/i5100_edac.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index 191aa7c19ded7..324a46b8479b0 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -1061,16 +1061,15 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
PCI_DEVICE_ID_INTEL_5100_19, 0);
if (!einj) {
ret = -ENODEV;
- goto bail_einj;
+ goto bail_mc_free;
}
rc = pci_enable_device(einj);
if (rc < 0) {
ret = rc;
- goto bail_disable_einj;
+ goto bail_einj;
}
-
mci->pdev = &pdev->dev;
priv = mci->pvt_info;
@@ -1136,14 +1135,14 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
bail_scrub:
priv->scrub_enable = 0;
cancel_delayed_work_sync(&(priv->i5100_scrubbing));
- edac_mc_free(mci);
-
-bail_disable_einj:
pci_disable_device(einj);
bail_einj:
pci_dev_put(einj);
+bail_mc_free:
+ edac_mc_free(mci);
+
bail_disable_ch1:
pci_disable_device(ch1mm);
--
2.25.1
From: Jiri Olsa <[email protected]>
[ Upstream commit f91072ed1b7283b13ca57fcfbece5a3b92726143 ]
There's a possible race in perf_mmap_close() when checking ring buffer's
mmap_count refcount value. The problem is that the mmap_count check is
not atomic because we call atomic_dec() and atomic_read() separately.
perf_mmap_close:
...
atomic_dec(&rb->mmap_count);
...
if (atomic_read(&rb->mmap_count))
goto out_put;
<ring buffer detach>
free_uid
out_put:
ring_buffer_put(rb); /* could be last */
The race can happen when we have two (or more) events sharing same ring
buffer and they go through atomic_dec() and then they both see 0 as refcount
value later in atomic_read(). Then both will go on and execute code which
is meant to be run just once.
The code that detaches ring buffer is probably fine to be executed more
than once, but the problem is in calling free_uid(), which will later on
demonstrate in related crashes and refcount warnings, like:
refcount_t: addition on 0; use-after-free.
...
RIP: 0010:refcount_warn_saturate+0x6d/0xf
...
Call Trace:
prepare_creds+0x190/0x1e0
copy_creds+0x35/0x172
copy_process+0x471/0x1a80
_do_fork+0x83/0x3a0
__do_sys_wait4+0x83/0x90
__do_sys_clone+0x85/0xa0
do_syscall_64+0x5b/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Using atomic decrease and check instead of separated calls.
Tested-by: Michael Petlan <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Acked-by: Wade Mealing <[email protected]>
Fixes: 9bb5d40cd93c ("perf: Fix mmap() accounting hole");
Link: https://lore.kernel.org/r/20200916115311.GE2301783@krava
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/events/core.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index fd8cd00099dae..38eeb297255e4 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5852,11 +5852,11 @@ static void perf_pmu_output_stop(struct perf_event *event);
static void perf_mmap_close(struct vm_area_struct *vma)
{
struct perf_event *event = vma->vm_file->private_data;
-
struct perf_buffer *rb = ring_buffer_get(event);
struct user_struct *mmap_user = rb->mmap_user;
int mmap_locked = rb->mmap_locked;
unsigned long size = perf_data_size(rb);
+ bool detach_rest = false;
if (event->pmu->event_unmapped)
event->pmu->event_unmapped(event, vma->vm_mm);
@@ -5887,7 +5887,8 @@ static void perf_mmap_close(struct vm_area_struct *vma)
mutex_unlock(&event->mmap_mutex);
}
- atomic_dec(&rb->mmap_count);
+ if (atomic_dec_and_test(&rb->mmap_count))
+ detach_rest = true;
if (!atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex))
goto out_put;
@@ -5896,7 +5897,7 @@ static void perf_mmap_close(struct vm_area_struct *vma)
mutex_unlock(&event->mmap_mutex);
/* If there's still other mmap()s of this buffer, we're done. */
- if (atomic_read(&rb->mmap_count))
+ if (!detach_rest)
goto out_put;
/*
--
2.25.1
From: Herbert Xu <[email protected]>
[ Upstream commit 2a05b029c1ee045b886ebf9efef9985ca23450de ]
I removed the MAY_BACKLOG flag on the aio path a while ago but
the error check still incorrectly interpreted EBUSY as success.
This may cause the submitter to wait for a request that will never
complete.
Fixes: dad419970637 ("crypto: algif_skcipher - Do not set...")
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/algif_skcipher.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c
index 81c4022285a7c..30069a92a9b22 100644
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -123,7 +123,7 @@ static int _skcipher_recvmsg(struct socket *sock, struct msghdr *msg,
crypto_skcipher_decrypt(&areq->cra_u.skcipher_req);
/* AIO operation in progress */
- if (err == -EINPROGRESS || err == -EBUSY)
+ if (err == -EINPROGRESS)
return -EIOCBQUEUED;
sock_put(sk);
--
2.25.1
hello,
Compiled and booted 5.8.17-rc1+.
Looks like no typical regression or regressions.
Tested-by: Jeffrin Jose T <[email protected]>
On Tue, Oct 27, 2020 at 8:23 PM Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.8.17 release.
> There are 633 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 29 Oct 2020 13:53:43 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.8.17-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.8.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
> -------------
> Pseudo-Shortlog of commits:
>
> Greg Kroah-Hartman <[email protected]>
> Linux 5.8.17-rc1
>
> Lorenzo Colitti <[email protected]>
> usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets.
>
> Christian Eggers <[email protected]>
> eeprom: at25: set minimum read/write access stride to 1
>
> Peter Chen <[email protected]>
> usb: cdns3: gadget: free interrupt after gadget has deleted
>
> Oliver Neukum <[email protected]>
> USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().
>
> Vincent Mailhol <[email protected]>
> usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
>
> Chunfeng Yun <[email protected]>
> usb: gadget: bcm63xx_udc: fix up the error of undeclared usb_debug_root
>
> Peng Fan <[email protected]>
> tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
>
> Peng Fan <[email protected]>
> tty: serial: lpuart: fix lpuart32_write usage
>
> Julian Wiedmann <[email protected]>
> s390/qeth: don't let HW override the configured port role
>
> Valentin Vidic <[email protected]>
> net: korina: cast KSEG0 address to pointer in kfree
>
> Zekun Shen <[email protected]>
> ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()
>
> Serge Semin <[email protected]>
> dmaengine: dw: Activate FIFO-mode for memory peripherals only
>
> Serge Semin <[email protected]>
> dmaengine: dw: Add DMA-channels mask cell support
>
> Qingqing Zhuo <[email protected]>
> drm/amd/display: Screen corruption on dual displays (DP+USB-C)
>
> Can Guo <[email protected]>
> scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()
>
> Eli Billauer <[email protected]>
> usb: core: Solve race condition in anchor cleanup functions
>
> Wang Yufen <[email protected]>
> brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach
>
> Kevin Barnett <[email protected]>
> scsi: smartpqi: Avoid crashing kernel for controller issues
>
> Sathyanarayana Nujella <[email protected]>
> ASoC: Intel: sof_rt5682: override quirk data for tgl_max98373_rt5682
>
> Sathyanarayana Nujella <[email protected]>
> ASoC: SOF: Add topology filename override based on dmi data match
>
> Connor McAdams <[email protected]>
> ALSA: hda/ca0132 - Add new quirk ID for SoundBlaster AE-7.
>
> Connor McAdams <[email protected]>
> ALSA: hda/ca0132 - Add AE-7 microphone selection commands.
>
> Tetsuo Handa <[email protected]>
> mwifiex: don't call del_timer_sync() on uninitialized timer
>
> Julian Wiedmann <[email protected]>
> s390/qeth: strictly order bridge address events
>
> Jan Kara <[email protected]>
> reiserfs: Fix memory leak in reiserfs_parse_options()
>
> Peilin Ye <[email protected]>
> ipvs: Fix uninit-value in do_ip_vs_set_ctl()
>
> Dinghao Liu <[email protected]>
> Bluetooth: btusb: Fix memleak in btusb_mtk_submit_wmt_recv_urb
>
> Tong Zhang <[email protected]>
> tty: ipwireless: fix error handling
>
> George Kennedy <[email protected]>
> fbmem: add margin check to fb_check_caps()
>
> Nilesh Javali <[email protected]>
> scsi: qedi: Fix list_del corruption while removing active I/O
>
> Nilesh Javali <[email protected]>
> scsi: qedi: Protect active command list to avoid list corruption
>
> Nilesh Javali <[email protected]>
> scsi: qedi: Mark all connections for recovery on link down event
>
> Saurav Kashyap <[email protected]>
> scsi: qedf: Return SUCCESS if stale rport is encountered
>
> Hans de Goede <[email protected]>
> HID: ite: Add USB id match for Acer One S1003 keyboard dock
>
> Doug Horn <[email protected]>
> Fix use after free in get_capset_info callback.
>
> Chris Chiu <[email protected]>
> rtl8xxxu: prevent potential memory leak
>
> Keita Suzuki <[email protected]>
> brcmsmac: fix memory leak in wlc_phy_attach_lcnphy
>
> Yonghong Song <[email protected]>
> selftests/bpf: Fix test_sysctl_loop{1, 2} failure due to clang change
>
> Daniel Wagner <[email protected]>
> scsi: qla2xxx: Warn if done() or free() are called on an already freed srb
>
> Jing Xiangfeng <[email protected]>
> scsi: ibmvfc: Fix error return in ibmvfc_probe()
>
> Qian Cai <[email protected]>
> iomap: fix WARN_ON_ONCE() from unprivileged users
>
> Zhenzhong Duan <[email protected]>
> drm/msm/a6xx: fix a potential overflow issue
>
> Abhishek Pandit-Subedi <[email protected]>
> Bluetooth: Only mark socket zapped after unlocking
>
> Jia Yang <[email protected]>
> drm: fix double free for gbo in drm_gem_vram_init and drm_gem_vram_create
>
> Hamish Martin <[email protected]>
> usb: ohci: Default to per-port over-current protection
>
> Darrick J. Wong <[email protected]>
> xfs: make sure the rt allocator doesn't run off the end
>
> Viresh Kumar <[email protected]>
> opp: Prevent memory leak in dev_pm_opp_attach_genpd()
>
> Eric Biggers <[email protected]>
> reiserfs: only call unlock_new_inode() if I_NEW
>
> Keita Suzuki <[email protected]>
> misc: rtsx: Fix memory leak in rtsx_pci_probe
>
> Maciej Fijalkowski <[email protected]>
> bpf: Limit caller's stack depth 256 for subprogs with tailcalls
>
> Neil Armstrong <[email protected]>
> drm/panfrost: add support for vendor quirk
>
> Neil Armstrong <[email protected]>
> drm/panfrost: add amlogic reset quirk callback
>
> Neil Armstrong <[email protected]>
> drm/panfrost: add Amlogic GPU integration quirks
>
> Brooke Basile <[email protected]>
> ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()
>
> Mikael Wikström <[email protected]>
> HID: multitouch: Lenovo X1 Tablet Gen3 trackpoint and buttons
>
> Joakim Zhang <[email protected]>
> can: flexcan: flexcan_chip_stop(): add error handling and propagate error value
>
> Oded Gabbay <[email protected]>
> habanalabs: cast to u64 before shift > 31 bits
>
> Mauro Carvalho Chehab <[email protected]>
> usb: dwc3: simple: add support for Hikey 970
>
> Johan Hovold <[email protected]>
> USB: cdc-acm: handle broken union descriptors
>
> Alan Maguire <[email protected]>
> selftests/bpf: Fix overflow tests to reflect iter size increase
>
> Tzu-En Huang <[email protected]>
> rtw88: increse the size of rx buffer size
>
> Jan Kara <[email protected]>
> udf: Avoid accessing uninitialized data on failed inode read
>
> Jan Kara <[email protected]>
> udf: Limit sparing table size
>
> Kai-Heng Feng <[email protected]>
> rtw88: pci: Power cycle device during shutdown
>
> Zqiang <[email protected]>
> usb: gadget: function: printer: fix use-after-free in __lock_acquire
>
> Yu Chen <[email protected]>
> usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
>
> Sherry Sun <[email protected]>
> misc: vop: add round_up(x,4) for vring_size to avoid kernel panic
>
> Sherry Sun <[email protected]>
> mic: vop: copy data to kernel space then write to io memory
>
> Roman Bolshakov <[email protected]>
> scsi: target: core: Add CONTROL field for trace events
>
> Jing Xiangfeng <[email protected]>
> scsi: mvumi: Fix error return in mvumi_io_attach()
>
> Christoph Hellwig <[email protected]>
> PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
>
> Song Liu <[email protected]>
> bpf: Use raw_spin_trylock() for pcpu_freelist_push/pop in NMI
>
> Hangbin Liu <[email protected]>
> libbpf: Close map fd if init map slots failed
>
> Jérôme Pouiller <[email protected]>
> staging: wfx: fix handling of MMIC error
>
> Thomas Pedersen <[email protected]>
> mac80211: handle lack of sband->bitrates in rates
>
> Cong Wang <[email protected]>
> ip_gre: set dev->hard_header_len and dev->needed_headroom properly
>
> Rustam Kovhaev <[email protected]>
> ntfs: add check for mft record size in superblock
>
> Dinghao Liu <[email protected]>
> media: venus: core: Fix runtime PM imbalance in venus_probe
>
> Rajendra Nayak <[email protected]>
> media: venus: core: Fix error handling in probe
>
> Alexander Aring <[email protected]>
> fs: dlm: fix configfs memory leak
>
> Vikash Garodia <[email protected]>
> media: venus: fixes for list corruption
>
> Dinghao Liu <[email protected]>
> media: atomisp: fix memleak in ia_css_stream_create
>
> Mauro Carvalho Chehab <[email protected]>
> media: saa7134: avoid a shift overflow
>
> Pali Rohár <[email protected]>
> mmc: sdio: Check for CISTPL_VERS_1 buffer size
>
> Adam Goode <[email protected]>
> media: uvcvideo: Ensure all probed info is returned to v4l2
>
> Borislav Petkov <[email protected]>
> x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
>
> Brad Bishop <[email protected]>
> spi: fsi: Fix clock running too fast
>
> Longfang Liu <[email protected]>
> crypto: hisilicon - fixed memory allocation error
>
> Borislav Petkov <[email protected]>
> x86/mce: Annotate mce_rd/wrmsrl() with noinstr
>
> Xiaolong Huang <[email protected]>
> media: media/pci: prevent memory leak in bttv_probe
>
> Dinghao Liu <[email protected]>
> media: bdisp: Fix runtime PM imbalance on error
>
> Dinghao Liu <[email protected]>
> media: platform: sti: hva: Fix runtime PM imbalance on error
>
> Dinghao Liu <[email protected]>
> media: platform: s3c-camif: Fix runtime PM imbalance on error
>
> Dinghao Liu <[email protected]>
> media: vsp1: Fix runtime PM imbalance on error
>
> Qiushi Wu <[email protected]>
> media: exynos4-is: Fix a reference count leak
>
> Qiushi Wu <[email protected]>
> media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync
>
> Qiushi Wu <[email protected]>
> media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync
>
> Qiushi Wu <[email protected]>
> media: sti: Fix reference count leaks
>
> Aditya Pakki <[email protected]>
> media: st-delta: Fix reference count leak in delta_run_work
>
> Oliver Neukum <[email protected]>
> media: ati_remote: sanity check for both endpoints
>
> Pavel Machek <[email protected]>
> media: firewire: fix memory leak
>
> Borislav Petkov <[email protected]>
> x86/mce: Add Skylake quirk for patrol scrub reported errors
>
> Arvind Sankar <[email protected]>
> x86/asm: Replace __force_order with a memory clobber
>
> Pavel Machek <[email protected]>
> crypto: ccp - fix error handling
>
> Mark Mossberg <[email protected]>
> x86/dumpstack: Fix misleading instruction pointer error message
>
> Tetsuo Handa <[email protected]>
> block: ratelimit handle_bad_sector() message
>
> Zhao Heming <[email protected]>
> md/bitmap: fix memory leak of temporary bitmap
>
> Hans de Goede <[email protected]>
> i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
>
> Al Grant <[email protected]>
> perf: correct SNOOPX field offset
>
> Juri Lelli <[email protected]>
> sched/features: Fix !CONFIG_JUMP_LABEL case
>
> Dinghao Liu <[email protected]>
> ntb: intel: Fix memleak in intel_ntb_pci_probe
>
> Kaige Li <[email protected]>
> NTB: hw: amd: fix an issue about leak system resources
>
> Vitaly Kuznetsov <[email protected]>
> KVM: ioapic: break infinite recursion on lazy EOI
>
> zhenwei pi <[email protected]>
> nvmet: fix uninitialized work for zero kato
>
> Ganesh Goudar <[email protected]>
> powerpc/pseries: Avoid using addr_to_pfn in real mode
>
> Vasant Hegde <[email protected]>
> powerpc/powernv/dump: Fix race while processing OPAL dump
>
> Colin Ian King <[email protected]>
> lightnvm: fix out-of-bounds write to array devices->info[]
>
> Martin Blumenstingl <[email protected]>
> ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
>
> Michal Simek <[email protected]>
> arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
>
> Dennis YC Hsieh <[email protected]>
> drm/mediatek: reduce clear event
>
> Dennis YC Hsieh <[email protected]>
> soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
>
> Biju Das <[email protected]>
> ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
>
> Marek Vasut <[email protected]>
> ARM: dts: stm32: Fix DH PDK2 display PWM channel
>
> Marek Vasut <[email protected]>
> ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM
>
> Marek Vasut <[email protected]>
> ARM: dts: stm32: Move ethernet PHY into DH SoM DT
>
> Holger Assmann <[email protected]>
> ARM: dts: stm32: lxa-mc1: Fix kernel warning about PHY delays
>
> Marek Vasut <[email protected]>
> ARM: dts: stm32: Fix sdmmc2 pins on AV96
>
> Tony Lindgren <[email protected]>
> ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
>
> Krzysztof Kozlowski <[email protected]>
> soc: fsl: qbman: Fix return value on success
>
> Cristian Ciocaltea <[email protected]>
> ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers
>
> Amit Singh Tomar <[email protected]>
> arm64: dts: actions: limit address range for pinctrl node
>
> Hsin-Yi Wang <[email protected]>
> arm64: dts: mt8173: elm: Fix nor_flash node property
>
> Geert Uytterhoeven <[email protected]>
> arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
>
> Geert Uytterhoeven <[email protected]>
> arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
>
> Corentin Labbe <[email protected]>
> dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset
>
> Sibi Sankar <[email protected]>
> soc: qcom: apr: Fixup the error displayed on lookup failure
>
> Stephan Gerhold <[email protected]>
> arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
>
> Stephan Gerhold <[email protected]>
> arm64: dts: qcom: pm8916: Remove invalid reg size from wcd_codec
>
> Stephan Gerhold <[email protected]>
> arm64: dts: qcom: msm8916: Remove one more thermal trip point unit name
>
> Sibi Sankar <[email protected]>
> soc: qcom: pdr: Fixup array type of get_domain_list_resp message
>
> Stephen Boyd <[email protected]>
> arm64: dts: qcom: sc7180: Drop flags on mdss irqs
>
> Krzysztof Kozlowski <[email protected]>
> arm64: dts: imx8mq: Add missing interrupts to GPC
>
> Sudeep Holla <[email protected]>
> firmware: arm_scmi: Fix NULL pointer dereference in mailbox_chan_free
>
> Krzysztof Kozlowski <[email protected]>
> memory: fsl-corenet-cf: Fix handling of platform_get_irq() error
>
> Sai Prakash Ranjan <[email protected]>
> arm64: dts: qcom: sc7180: Fix the LLCC base register size
>
> YueHaibing <[email protected]>
> memory: omap-gpmc: Fix build error without CONFIG_OF
>
> Dan Carpenter <[email protected]>
> memory: omap-gpmc: Fix a couple off by ones
>
> Qiang Yu <[email protected]>
> arm64: dts: allwinner: h5: remove Mali GPU PMU module
>
> Jernej Skrabec <[email protected]>
> ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
>
> Arnd Bergmann <[email protected]>
> ARM: s3c24xx: fix mmc gpio lookup tables
>
> Claudiu Beznea <[email protected]>
> ARM: at91: pm: of_node_put() after its usage
>
> Horia Geantă <[email protected]>
> ARM: dts: imx6sl: fix rng node
>
> Jerome Brunet <[email protected]>
> arm64: dts: meson: vim3: correct led polarity
>
> Dan Carpenter <[email protected]>
> soc: xilinx: Fix error code in zynqmp_pm_probe()
>
> Pablo Neira Ayuso <[email protected]>
> netfilter: nf_fwd_netdev: clear timestamp in forwarding path
>
> Ard Biesheuvel <[email protected]>
> netsec: ignore 'phy-mode' device property on ACPI systems
>
> Timothée COCAULT <[email protected]>
> netfilter: ebtables: Fixes dropping of small packets in bridge nat
>
> Francesco Ruggeri <[email protected]>
> netfilter: conntrack: connection timeout after re-register
>
> Ard Biesheuvel <[email protected]>
> arm64: mm: use single quantity to represent the PA to VA translation
>
> Jing Xiangfeng <[email protected]>
> scsi: bfa: Fix error return in bfad_pci_init()
>
> Robert Hoo <[email protected]>
> KVM: x86: emulating RDPID failure shall return #UD rather than #GP
>
> Krzysztof Kozlowski <[email protected]>
> Input: sun4i-ps2 - fix handling of platform_get_irq() error
>
> Krzysztof Kozlowski <[email protected]>
> Input: twl4030_keypad - fix handling of platform_get_irq() error
>
> Krzysztof Kozlowski <[email protected]>
> Input: omap4-keypad - fix handling of platform_get_irq() error
>
> Krzysztof Kozlowski <[email protected]>
> Input: ep93xx_keypad - fix handling of platform_get_irq() error
>
> YueHaibing <[email protected]>
> Input: stmfts - fix a & vs && typo
>
> Dan Carpenter <[email protected]>
> Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()
>
> Johnny Chuang <[email protected]>
> Input: elants_i2c - fix typo for an attribute to show calibration count
>
> Gwendal Grignou <[email protected]>
> platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
>
> Martijn de Gouw <[email protected]>
> SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
>
> Abel Vesa <[email protected]>
> clk: imx8mq: Fix usdhc parents order
>
> Xiaoyang Xu <[email protected]>
> vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
>
> Alex Williamson <[email protected]>
> vfio/pci: Clear token on bypass registration failure
>
> Darrick J. Wong <[email protected]>
> ext4: limit entries returned when counting fsmap records
>
> Xiao Yang <[email protected]>
> ext4: disallow modifying DAX inode flag if inline_data has been set
>
> Jan Kara <[email protected]>
> ext4: discard preallocations before releasing group lock
>
> Ye Bin <[email protected]>
> ext4: fix dead loop in ext4_mb_new_blocks
>
> Dan Aloni <[email protected]>
> svcrdma: fix bounce buffers for unaligned offsets and multiple pages
>
> Guenter Roeck <[email protected]>
> watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3
>
> Dinghao Liu <[email protected]>
> watchdog: Use put_device on error
>
> Dinghao Liu <[email protected]>
> watchdog: Fix memleak in watchdog_cdev_register
>
> Masahiro Yamada <[email protected]>
> kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
>
> Navid Emamdoost <[email protected]>
> clk: bcm2835: add missing release if devm_clk_hw_register fails
>
> Claudiu Beznea <[email protected]>
> clk: at91: clk-main: update key before writing AT91_CKGR_MOR
>
> Daniel Jordan <[email protected]>
> module: statically initialize init section freeing data
>
> Hanks Chen <[email protected]>
> clk: mediatek: add UART0 clock support
>
> Stephen Boyd <[email protected]>
> clk: rockchip: Initialize hw to error to avoid undefined behavior
>
> Dexuan Cui <[email protected]>
> PCI: hv: Fix hibernation in case interrupts are not re-created
>
> Colin Ian King <[email protected]>
> remoteproc/mediatek: fix null pointer dereference on null scp pointer
>
> Hauke Mehrtens <[email protected]>
> pwm: img: Fix null pointer access in probe
>
> Simon South <[email protected]>
> pwm: rockchip: Keep enabled PWMs running while probing
>
> Tero Kristo <[email protected]>
> clk: keystone: sci-clk: fix parsing assigned-clock data during probe
>
> Konrad Dybcio <[email protected]>
> clk: qcom: gcc-sdm660: Fix wrong parent_map
>
> Yan Zhao <[email protected]>
> vfio/type1: fix dirty bitmap calculation in vfio_dma_rw
>
> Yan Zhao <[email protected]>
> vfio: fix a missed vfio group put in vfio_pin_pages
>
> Matthew Rosato <[email protected]>
> vfio/pci: Decouple PCI_COMMAND_MEMORY bit checks from is_virtfn
>
> Matthew Rosato <[email protected]>
> s390/pci: Mark all VFs as not implementing PCI_COMMAND_MEMORY
>
> Yan Zhao <[email protected]>
> vfio: add a singleton check for vfio_group_pin_pages
>
> Matthew Rosato <[email protected]>
> PCI/IOV: Mark VFs as not implementing PCI_COMMAND_MEMORY
>
> Nicolas Boichat <[email protected]>
> rpmsg: Avoid double-free in mtk_rpmsg_register_device
>
> Dan Carpenter <[email protected]>
> rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
>
> Mark Tomlinson <[email protected]>
> PCI: iproc: Set affinity mask on MSI interrupts
>
> Pali Rohár <[email protected]>
> PCI: aardvark: Check for errors from pci_bridge_emul_init() call
>
> Pali Rohár <[email protected]>
> PCI: aardvark: Fix compilation on s390
>
> Hou Zhiqiang <[email protected]>
> PCI: designware-ep: Fix the Header Type check
>
> Stefan Agner <[email protected]>
> clk: meson: g12a: mark fclk_div2 as critical
>
> Dirk Behme <[email protected]>
> i2c: rcar: Auto select RESET_CONTROLLER
>
> Chris Packham <[email protected]>
> rtc: ds1307: Clear OSF flag on DS1388 when setting time
>
> Jerome Brunet <[email protected]>
> clk: meson: axg-audio: separate axg and g12a regmap tables
>
> Jassi Brar <[email protected]>
> mailbox: avoid timer start from callback
>
> Jing Xiangfeng <[email protected]>
> rapidio: fix the missed put_device() for rio_mport_add_riodev
>
> Souptick Joarder <[email protected]>
> rapidio: fix error handling path
>
> Matthew Wilcox (Oracle) <[email protected]>
> ramfs: fix nommu mmap with gaps in the page cache
>
> Tobias Jordan <[email protected]>
> lib/crc32.c: fix trivial typo in preprocessor condition
>
> Matthew Wilcox (Oracle) <[email protected]>
> mm/page_owner: change split_page_owner to take a count
>
> Bob Pearson <[email protected]>
> RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
>
> David Howells <[email protected]>
> afs: Fix cell removal
>
> David Howells <[email protected]>
> afs: Fix cell purging with aliases
>
> David Howells <[email protected]>
> afs: Fix cell refcounting by splitting the usage counter
>
> David Howells <[email protected]>
> afs: Fix rapid cell addition/removal by not using RCU on cells tree
>
> Jamie Iles <[email protected]>
> f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info
>
> Oliver O'Halloran <[email protected]>
> selftests/powerpc: Fix eeh-basic.sh exit codes
>
> Jiri Slaby <[email protected]>
> perf trace: Fix off by ones in memset() after realloc() in arches using libaudit
>
> Krzysztof Kozlowski <[email protected]>
> maiblox: mediatek: Fix handling of platform_get_irq() error
>
> Johannes Berg <[email protected]>
> um: time-travel: Fix IRQ handling in time_travel_handle_message()
>
> Tiezhu Yang <[email protected]>
> um: vector: Use GFP_ATOMIC under spin lock
>
> Eric Biggers <[email protected]>
> f2fs: reject CASEFOLD inode flag without casefold feature
>
> Bob Pearson <[email protected]>
> RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
>
> Colin Ian King <[email protected]>
> IB/rdmavt: Fix sizeof mismatch
>
> Srikar Dronamraju <[email protected]>
> cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
>
> Vaibhav Jain <[email protected]>
> powerpc/papr_scm: Add PAPR command family to pass-through command-set
>
> Jing Xiangfeng <[email protected]>
> i3c: master: Fix error return in cdns_i3c_master_probe()
>
> Namhyung Kim <[email protected]>
> perf stat: Fix out of bounds CPU map access when handling armv8_pmu events
>
> Kajol Jain <[email protected]>
> powerpc/perf/hv-gpci: Fix starting index value
>
> Athira Rajeev <[email protected]>
> powerpc/perf: Exclude pmc5/6 from the irrelevant PMU group constraints
>
> Nicholas Piggin <[email protected]>
> powerpc/64: fix irq replay pt_regs->softe value
>
> Nicholas Piggin <[email protected]>
> powerpc/64: fix irq replay missing preempt
>
> Kamal Heib <[email protected]>
> RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
>
> Leon Romanovsky <[email protected]>
> overflow: Include header file with SIZE_MAX declaration
>
> Daniel Thompson <[email protected]>
> kdb: Fix pager search for multi-line strings
>
> Janusz Krzysztofik <[email protected]>
> mtd: rawnand: ams-delta: Fix non-OF build warning
>
> Hauke Mehrtens <[email protected]>
> mtd: spinand: gigadevice: Add QE Bit
>
> Hauke Mehrtens <[email protected]>
> mtd: spinand: gigadevice: Only one dummy byte in QUADIO
>
> Evgeny Novikov <[email protected]>
> mtd: rawnand: vf610: disable clk on error handling path in probe
>
> Christophe Kerello <[email protected]>
> mtd: rawnand: stm32_fmc2: fix a buffer overflow
>
> Vignesh Raghavendra <[email protected]>
> mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash access
>
> Weihang Li <[email protected]>
> RDMA/hns: Fix missing sq_sig_type when querying QP
>
> Weihang Li <[email protected]>
> RDMA/hns: Fix configuration of ack_req_freq in QPC
>
> Wenpeng Liang <[email protected]>
> RDMA/hns: Fix the wrong value of rnr_retry when querying qp
>
> Jiaran Zhang <[email protected]>
> RDMA/hns: Solve the overflow of the calc_pg_sz()
>
> Jiaran Zhang <[email protected]>
> RDMA/hns: Add check for the validity of sl configuration
>
> Jin Yao <[email protected]>
> perf stat: Skip duration_time in setup_system_wide
>
> Sindhu, Devale <[email protected]>
> i40iw: Add support to make destroy QP synchronous
>
> Jason Gunthorpe <[email protected]>
> RDMA/mlx5: Disable IB_DEVICE_MEM_MGT_EXTENSIONS if IB_WR_REG_MR can't work
>
> Jason Gunthorpe <[email protected]>
> RDMA/mlx5: Make mkeys always owned by the kernel's PD when not enabled
>
> Jason Gunthorpe <[email protected]>
> RDMA/mlx5: Use set_mkc_access_pd_addr_fields() in reg_create()
>
> Lijun Ou <[email protected]>
> RDMA/hns: Set the unsupported wr opcode
>
> Keita Suzuki <[email protected]>
> RDMA/qedr: Fix resource leak in qedr_create_qp
>
> Adrian Hunter <[email protected]>
> perf intel-pt: Fix "context_switch event has no tid" error
>
> Jason Gunthorpe <[email protected]>
> RDMA/cma: Fix use after free race in roce multicast join
>
> Jason Gunthorpe <[email protected]>
> RDMA/cma: Consolidate the destruction of a cma_multicast in one place
>
> Jason Gunthorpe <[email protected]>
> RDMA/cma: Remove dead code for kernel rdmacm multicast
>
> Jason Gunthorpe <[email protected]>
> RDMA/cma: Combine cma_ndev_work with cma_work
>
> Nicholas Piggin <[email protected]>
> powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mm
>
> Christophe Leroy <[email protected]>
> powerpc/kasan: Fix CONFIG_KASAN_VMALLOC for 8xx
>
> Finn Thain <[email protected]>
> powerpc/tau: Disable TAU between measurements
>
> Finn Thain <[email protected]>
> powerpc/tau: Check processor type before enabling TAU interrupt
>
> Finn Thain <[email protected]>
> powerpc/tau: Remove duplicated set_thresholds() call
>
> Finn Thain <[email protected]>
> powerpc/tau: Convert from timer to workqueue
>
> Finn Thain <[email protected]>
> powerpc/tau: Use appropriate temperature sample interval
>
> Aneesh Kumar K.V <[email protected]>
> powerpc/book3s64/hash/4k: Support large linear mapping range with 4K
>
> Ravi Bangoria <[email protected]>
> powerpc/watchpoint: Add hw_len wherever missing
>
> Ravi Bangoria <[email protected]>
> powerpc/watchpoint: Fix handling of vector instructions
>
> Ravi Bangoria <[email protected]>
> powerpc/watchpoint: Fix quadword instruction handling on p10 predecessors
>
> Thiago Jung Bauermann <[email protected]>
> powerpc/pseries/svm: Allocate SWIOTLB buffer anywhere in memory
>
> Michal Kalderon <[email protected]>
> RDMA/qedr: Fix inline size returned for iWARP
>
> Michal Kalderon <[email protected]>
> RDMA/qedr: Fix return code if accept is called on a destroyed qp
>
> Michal Kalderon <[email protected]>
> RDMA/qedr: Fix use of uninitialized field
>
> Michal Kalderon <[email protected]>
> RDMA/qedr: Fix doorbell setting
>
> Michal Kalderon <[email protected]>
> RDMA/qedr: Fix qp structure memory leak
>
> Jason Gunthorpe <[email protected]>
> RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()
>
> Jason Gunthorpe <[email protected]>
> RDMA/umem: Fix ib_umem_find_best_pgsz() for mappings that cross a page boundary
>
> Leon Romanovsky <[email protected]>
> RDMA: Allow fail of destroy CQ
>
> Leon Romanovsky <[email protected]>
> RDMA/core: Delete function indirection for alloc/free kernel CQ
>
> Md Haris Iqbal <[email protected]>
> RDMA/rtrs-srv: Incorporate ib_register_client into rtrs server init
>
> Darrick J. Wong <[email protected]>
> xfs: fix high key handling in the rt allocator's query_range function
>
> Scott Mayhew <[email protected]>
> nfs: add missing "posix" local_lock constant table definition
>
> Darrick J. Wong <[email protected]>
> xfs: fix deadlock and streamline xfs_getfsmap performance
>
> Darrick J. Wong <[email protected]>
> xfs: limit entries returned when counting fsmap records
>
> Matthew Wilcox (Oracle) <[email protected]>
> ida: Free allocated bitmap in error path
>
> Necip Fazil Yildiran <[email protected]>
> arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER
>
> Greg Ungerer <[email protected]>
> m68knommu: include SDHC support only when hardware has it
>
> Dave Chinner <[email protected]>
> xfs: fix finobt btree block recovery ordering
>
> Guillaume Tucker <[email protected]>
> ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values
>
> Arnaldo Carvalho de Melo <[email protected]>
> tools feature: Add missing -lzstd to the fast path feature detection
>
> Arnaldo Carvalho de Melo <[email protected]>
> perf tools: Make GTK2 support opt-in
>
> Mark Tomlinson <[email protected]>
> mtd: mtdoops: Don't write panic data twice
>
> Leon Romanovsky <[email protected]>
> RDMA/mlx5: Fix potential race between destroy and CQE poll
>
> Scott Cheloha <[email protected]>
> pseries/drmem: don't cache node id in drmem_lmb struct
>
> Nathan Lynch <[email protected]>
> powerpc/pseries: explicitly reschedule during drmem_lmb list traversal
>
> Jason Gunthorpe <[email protected]>
> RDMA/umem: Fix signature of stub ib_umem_find_best_pgsz()
>
> Lang Cheng <[email protected]>
> RDMA/hns: Add a check for current state before modifying QP
>
> Arnd Bergmann <[email protected]>
> mtd: lpddr: fix excessive stack usage with clang
>
> Jason Gunthorpe <[email protected]>
> RDMA/ucma: Add missing locking around rdma_leave_multicast()
>
> Jason Gunthorpe <[email protected]>
> RDMA/ucma: Fix locking for ctx->events_reported
>
> Paul E. McKenney <[email protected]>
> rcutorture: Properly set rcu_fwds for OOM handling
>
> Neeraj Upadhyay <[email protected]>
> rcu/tree: Force quiescent state on callback overload
>
> Nicholas Mc Guire <[email protected]>
> powerpc/icp-hv: Fix missing of_node_put() in success path
>
> Nicholas Mc Guire <[email protected]>
> powerpc/pseries: Fix missing of_node_put() in rng_init()
>
> Håkon Bugge <[email protected]>
> IB/mlx4: Adjust delayed work when a dup is observed
>
> Håkon Bugge <[email protected]>
> IB/mlx4: Fix starvation in paravirt mux/demux
>
> Parshuram Thombare <[email protected]>
> i3c: master add i3c_master_attach_boardinfo to preserve boardinfo
>
> Tom Zanussi <[email protected]>
> tracing: Handle synthetic event array field type checking correctly
>
> Tom Zanussi <[email protected]>
> selftests/ftrace: Change synthetic event name for inter-event-combined test
>
> Andrii Nakryiko <[email protected]>
> fs: fix NULL dereference due to data race in prepend_path()
>
> Suren Baghdasaryan <[email protected]>
> mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
>
> Ralph Campbell <[email protected]>
> mm/memcg: fix device private memcg accounting
>
> Miaohe Lin <[email protected]>
> mm/swapfile.c: fix potential memory leak in sys_swapon
>
> Pablo Neira Ayuso <[email protected]>
> netfilter: nf_log: missing vlan offload tag and proto
>
> Valentin Vidic <[email protected]>
> net: korina: fix kfree of rx/tx descriptor array
>
> John Fastabend <[email protected]>
> bpf, sockmap: Remove skb_orphan and let normal skb_kfree do cleanup
>
> Julian Anastasov <[email protected]>
> ipvs: clear skb->tstamp in forwarding path
>
> Christian Hewitt <[email protected]>
> drm/panfrost: increase readl_relaxed_poll_timeout values
>
> Tom Rix <[email protected]>
> mwifiex: fix double free
>
> Vadim Pasternak <[email protected]>
> platform/x86: mlx-platform: Remove PSU EEPROM configuration
>
> Tom Zanussi <[email protected]>
> tracing: Fix parse_synth_field() error handling
>
> Tianjia Zhang <[email protected]>
> ipmi_si: Fix wrong return value in try_smi_init()
>
> Logan Gunthorpe <[email protected]>
> dmaengine: ioat: Allocate correct size for descriptor chunk
>
> Dan Carpenter <[email protected]>
> scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
>
> John Donnelly <[email protected]>
> scsi: target: tcmu: Fix warning: 'page' may be used uninitialized
>
> Minas Harutyunyan <[email protected]>
> usb: dwc2: Fix INTR OUT transfers in DDMA mode.
>
> Johannes Berg <[email protected]>
> nl80211: fix non-split wiphy information
>
> Necip Fazil Yildiran <[email protected]>
> ocxl: fix kconfig dependency warning for OCXL
>
> Manivannan Sadhasivam <[email protected]>
> bus: mhi: core: Fix the building of MHI module
>
> Lorenzo Colitti <[email protected]>
> usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well
>
> Yoshihiro Shimoda <[email protected]>
> usb: gadget: u_serial: clear suspended flag when disconnecting
>
> Lorenzo Colitti <[email protected]>
> usb: gadget: f_ncm: fix ncm_bitrate for SuperSpeed and above.
>
> Mordechay Goodstein <[email protected]>
> iwlwifi: dbg: run init_cfg function once per driver load
>
> Mordechay Goodstein <[email protected]>
> iwlwifi: dbg: remove no filter condition
>
> Emmanuel Grumbach <[email protected]>
> iwlwifi: mvm: split a print to avoid a WARNING in ROC
>
> Adam Brickman <[email protected]>
> ASoC: wm_adsp: Pass full name to snd_ctl_notify
>
> Dan Carpenter <[email protected]>
> mfd: sm501: Fix leaks in probe()
>
> Thomas Gleixner <[email protected]>
> net: enic: Cure the enic api locking trainwreck
>
> Fabrice Gasnier <[email protected]>
> iio: adc: stm32-adc: fix runtime autosuspend delay when slow polling
>
> Yu Kuai <[email protected]>
> iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
>
> Andrew Jeffery <[email protected]>
> pinctrl: aspeed: Use the right pinconf mask
>
> Colin Ian King <[email protected]>
> qtnfmac: fix resource leaks on unsupported iftype error return path
>
> Toke Høiland-Jørgensen <[email protected]>
> selftests: Remove fmod_ret from test_overhead
>
> Toke Høiland-Jørgensen <[email protected]>
> bpf: disallow attaching modify_return tracing functions to other BPF programs
>
> Lijun Pan <[email protected]>
> ibmvnic: set up 200GBPS speed
>
> Sai Prakash Ranjan <[email protected]>
> coresight: etm4x: Fix save and restore of TRCVMIDCCTLR1 register
>
> Mike Leach <[email protected]>
> coresight: cti: Fix bug clearing sysfs links on callback
>
> Mike Leach <[email protected]>
> coresight: cti: Fix remove sysfs link error
>
> Tingwei Zhang <[email protected]>
> coresight: etm: perf: Fix warning caused by etm_setup_aux failure
>
> Matthew Wilcox (Oracle) <[email protected]>
> iomap: Use kzalloc to allocate iomap_page
>
> Rajkumar Manoharan <[email protected]>
> nl80211: fix OBSS PD min and max offset validation
>
> Mohammed Gamal <[email protected]>
> hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions
>
> Vadym Kochan <[email protected]>
> nvmem: core: fix possibly memleak when use nvmem_cell_info_to_nvmem_cell()
>
> Yang Yingliang <[email protected]>
> tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
>
> Dmitry Torokhov <[email protected]>
> HID: hid-input: fix stylus battery reporting
>
> Shengjiu Wang <[email protected]>
> ASoC: fsl_sai: Instantiate snd_soc_dai_driver
>
> Srinivas Kandagatla <[email protected]>
> slimbus: qcom-ngd-ctrl: disable ngd in qmi server down callback
>
> Srinivas Kandagatla <[email protected]>
> slimbus: core: do not enter to clock pause mode in core
>
> Srinivas Kandagatla <[email protected]>
> slimbus: core: check get_addr before removing laddr ida
>
> Eric Dumazet <[email protected]>
> quota: clear padding in v2r1_mem2diskdqb()
>
> Lorenzo Bianconi <[email protected]>
> mt76: mt7915: fix possible memory leak in mt7915_mcu_add_beacon
>
> Andreas Färber <[email protected]>
> rtw88: Fix potential probe error handling race with wow firmware loading
>
> Andreas Färber <[email protected]>
> rtw88: Fix probe error handling race with firmware loading
>
> Martin Blumenstingl <[email protected]>
> usb: dwc2: Add missing cleanups when usb_add_gadget_udc() fails
>
> Thinh Nguyen <[email protected]>
> usb: dwc3: core: Properly default unspecified speed
>
> Nathan Chancellor <[email protected]>
> usb: dwc2: Fix parameter type in function pointer prototype
>
> Takashi Iwai <[email protected]>
> ALSA: seq: oss: Avoid mutex lock for a long-time ioctl
>
> Souptick Joarder <[email protected]>
> misc: mic: scif: Fix error handling path
>
> Necip Fazil Yildiran <[email protected]>
> ASoC: cros_ec_codec: fix kconfig dependency warning for SND_SOC_CROS_EC_CODEC
>
> Andy Shevchenko <[email protected]>
> dmaengine: dmatest: Check list for emptiness before access its last entry
>
> Tomasz Figa <[email protected]>
> phy: rockchip-dphy-rx0: Include linux/delay.h
>
> Laurent Pinchart <[email protected]>
> drm: rcar-du: Put reference to VSP device
>
> Dan Carpenter <[email protected]>
> ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()
>
> Bo YU <[email protected]>
> ath11k: Add checked value for ath11k_ahb_remove
>
> Aswath Govindraju <[email protected]>
> spi: omap2-mcspi: Improve performance waiting for CHSTAT
>
> Dan Murphy <[email protected]>
> ASoC: tas2770: Fix unbalanced calls to pm_runtime
>
> Pierre-Louis Bossart <[email protected]>
> ASoC: SOF: control: add size checks for ext_bytes control .put()
>
> Linus Walleij <[email protected]>
> net: dsa: rtl8366rb: Support all 4096 VLANs
>
> Miquel Raynal <[email protected]>
> ASoC: tlv320aic32x4: Fix bdiv clock rate derivation
>
> Dan Murphy <[email protected]>
> ASoC: tas2770: Fix error handling with update_bits
>
> Dan Murphy <[email protected]>
> ASoC: tas2770: Fix required DT properties in the code
>
> Dan Murphy <[email protected]>
> ASoC: tas2770: Add missing bias level power states
>
> Dan Murphy <[email protected]>
> ASoC: tas2770: Fix calling reset in probe
>
> Huang Guobin <[email protected]>
> net: wilc1000: clean up resource in error path of init mon interface
>
> Linus Walleij <[email protected]>
> net: dsa: rtl8366: Skip PVID setting if not requested
>
> Linus Walleij <[email protected]>
> net: dsa: rtl8366: Refactor VLAN/PVID init
>
> Linus Walleij <[email protected]>
> net: dsa: rtl8366: Check validity of passed VLANs
>
> Mathias Nyman <[email protected]>
> xhci: don't create endpoint debugfs entry before ring buffer is set.
>
> Ilya Leoshkevich <[email protected]>
> selftests/bpf: Fix endianness issue in test_sockopt_sk
>
> Ilya Leoshkevich <[email protected]>
> selftests/bpf: Fix endianness issue in sk_assign
>
> Matthieu Baerts <[email protected]>
> selftests: mptcp: interpret \n as a new line
>
> Vadym Kochan <[email protected]>
> nvmem: core: fix missing of_node_put() in of_nvmem_device_get()
>
> Jonathan Zhou <[email protected]>
> coresight: etm4x: Fix issues on trcseqevr access
>
> Suzuki K Poulose <[email protected]>
> coresight: etm4x: Handle unreachable sink in perf mode
>
> Tingwei Zhang <[email protected]>
> coresight: cti: Write regsiters directly in cti_enable_hw()
>
> Jonathan Zhou <[email protected]>
> coresight: etm4x: Fix issues within reset interface of sysfs
>
> Mike Leach <[email protected]>
> coresight: etm4x: Ensure default perf settings filter user/kernel
>
> Tingwei Zhang <[email protected]>
> coresight: cti: remove pm_runtime_get_sync() from CPU hotplug
>
> Tingwei Zhang <[email protected]>
> coresight: cti: disclaim device only when it's claimed
>
> Mian Yousaf Kaukab <[email protected]>
> coresight: fix offset by one error in counting ports
>
> Sai Prakash Ranjan <[email protected]>
> coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init
>
> Camel Guo <[email protected]>
> ASoC: tlv320adcx140: Fix digital gain range
>
> Pierre-Louis Bossart <[email protected]>
> ASoC: topology: disable size checks for bytes_ext controls if needed
>
> KP Singh <[email protected]>
> ima: Fix NULL pointer dereference in ima_file_hash
>
> Stefan Agner <[email protected]>
> drm: mxsfb: check framebuffer pitch
>
> Pali Rohár <[email protected]>
> cpufreq: armada-37xx: Add missing MODULE_DEVICE_TABLE
>
> Darrick J. Wong <[email protected]>
> xfs: force the log after remapping a synchronous-writes file
>
> Ong Boon Leong <[email protected]>
> net: stmmac: use netif_tx_start|stop_all_queues() function
>
> Aashish Verma <[email protected]>
> net: stmmac: Fix incorrect location to set real_num_rx|tx_queues
>
> Tomas Henzl <[email protected]>
> scsi: mpt3sas: Fix sync irqs
>
> Eran Ben Elisha <[email protected]>
> net/mlx5: Don't call timecounter cyc2time directly from 1PPS flow
>
> Moshe Tal <[email protected]>
> net/mlx5: Fix uninitialized variable warning
>
> Luca Weiss <[email protected]>
> drm/msm/adreno: fix probe without iommu
>
> Thierry Reding <[email protected]>
> pinctrl: devicetree: Keep deferring even on timeout
>
> Thomas Preston <[email protected]>
> pinctrl: mcp23s08: Fix mcp23x17 precious range
>
> Thomas Preston <[email protected]>
> pinctrl: mcp23s08: Fix mcp23x17_regmap initialiser
>
> Abhishek Pandit-Subedi <[email protected]>
> Bluetooth: Re-order clearing suspend tasks
>
> Kees Cook <[email protected]>
> selftests/lkdtm: Use "comm" instead of "diff" for dmesg
>
> Matthew Wilcox (Oracle) <[email protected]>
> iomap: Mark read blocks uptodate in write_begin
>
> Matthew Wilcox (Oracle) <[email protected]>
> iomap: Clear page error before beginning a write
>
> Steven Price <[email protected]>
> drm/panfrost: Ensure GPU quirks are always initialised
>
> Stephen Boyd <[email protected]>
> drm/msm: Avoid div-by-zero in dpu_crtc_atomic_check()
>
> Dan Carpenter <[email protected]>
> HID: roccat: add bounds checking in kone_sysfs_write_settings()
>
> Stanley Chu <[email protected]>
> scsi: ufs: ufs-mediatek: Fix HOST_PA_TACTIVATE quirk
>
> Yu Kuai <[email protected]>
> ASoC: fsl: imx-es8328: add missing put_device() call in imx_es8328_probe()
>
> Dinghao Liu <[email protected]>
> video: fbdev: radeon: Fix memleak in radeonfb_pci_register
>
> Tom Rix <[email protected]>
> video: fbdev: sis: fix null ptr dereference
>
> Colin Ian King <[email protected]>
> video: fbdev: vga16fb: fix setting of pixclock because a pass-by-value error
>
> Tom Rix <[email protected]>
> ath11k: fix a double free and a memory leak
>
> Souptick Joarder <[email protected]>
> drivers/virt/fsl_hypervisor: Fix error handling path
>
> Hans de Goede <[email protected]>
> pwm: lpss: Add range limit check for the base_unit register value
>
> Hans de Goede <[email protected]>
> pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare()
>
> Artem Savkov <[email protected]>
> pty: do tty_flip_buffer_push without port->lock in pty_write
>
> Tyrel Datwyler <[email protected]>
> tty: hvcs: Don't NULL tty->driver_data until hvcs_cleanup()
>
> Tong Zhang <[email protected]>
> tty: serial: earlycon dependency
>
> Jann Horn <[email protected]>
> binder: Remove bogus warning on failed same-process transaction
>
> Eric Biggers <[email protected]>
> scsi: ufs: Make ufshcd_print_trs() consider UFSHCD_QUIRK_PRDT_BYTE_GRAN
>
> Anatoly Pugachev <[email protected]>
> selftests: vm: add fragment CONFIG_GUP_BENCHMARK
>
> Abhishek Pandit-Subedi <[email protected]>
> Bluetooth: Clear suspend tasks on unregister
>
> Dinghao Liu <[email protected]>
> drm/crc-debugfs: Fix memleak in crc_control_write
>
> Weqaar Janjua <[email protected]>
> samples/bpf: Fix to xdpsock to avoid recycling frames
>
> Laurent Pinchart <[email protected]>
> drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panel
>
> Alexei Starovoitov <[email protected]>
> mm/error_inject: Fix allow_error_inject function signatures.
>
> Alex Dewar <[email protected]>
> VMCI: check return value of get_user_pages_fast() for errors
>
> Alex Dewar <[email protected]>
> staging: emxx_udc: Fix passing of NULL to dma_alloc_coherent()
>
> [email protected] <[email protected]>
> backlight: sky81452-backlight: Fix refcount imbalance on error
>
> Brian Norris <[email protected]>
> rtw88: don't treat NULL pointer as an array
>
> Dinghao Liu <[email protected]>
> wilc1000: Fix memleak in wilc_bus_probe
>
> Dinghao Liu <[email protected]>
> wilc1000: Fix memleak in wilc_sdio_probe
>
> Alex Gartrell <[email protected]>
> libbpf: Fix unintentional success return code in bpf_object__load
>
> Tianjia Zhang <[email protected]>
> scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()
>
> Tianjia Zhang <[email protected]>
> scsi: qla2xxx: Fix wrong return value in qla_nvme_register_hba()
>
> Tianjia Zhang <[email protected]>
> scsi: qla2xxx: Fix wrong return value in qlt_chk_unresolv_exchg()
>
> Christophe JAILLET <[email protected]>
> scsi: qla2xxx: Fix the size used in a 'dma_free_coherent()' call
>
> Christophe JAILLET <[email protected]>
> scsi: qla4xxx: Fix an error handling path in 'qla4xxx_get_host_stats()'
>
> Tom Rix <[email protected]>
> drm/gma500: fix error check
>
> Andrii Nakryiko <[email protected]>
> selftests/bpf: Fix test_vmlinux test to use bpf_probe_read_user()
>
> Colin Ian King <[email protected]>
> drm/amd/display: fix potential integer overflow when shifting 32 bit variable bl_pwm
>
> Christophe JAILLET <[email protected]>
> staging: rtl8192u: Do not use GFP_KERNEL in atomic context
>
> Christophe JAILLET <[email protected]>
> mwifiex: Do not use GFP_KERNEL in atomic context
>
> Tom Rix <[email protected]>
> brcmfmac: check ndev pointer
>
> Wang Yufen <[email protected]>
> ath11k: Fix possible memleak in ath11k_qmi_init_service
>
> Rohit kumar <[email protected]>
> ASoC: qcom: lpass-cpu: fix concurrency issue
>
> Rohit kumar <[email protected]>
> ASoC: qcom: lpass-platform: fix memory leak
>
> Bryan O'Donoghue <[email protected]>
> wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680
>
> Christophe JAILLET <[email protected]>
> ath10k: Fix the size used in a 'dma_free_coherent()' call in an error handling path
>
> Dan Carpenter <[email protected]>
> ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()
>
> Dan Carpenter <[email protected]>
> ath6kl: prevent potential array overflow in ath6kl_add_new_sta()
>
> Laurent Pinchart <[email protected]>
> drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel
>
> Qinglang Miao <[email protected]>
> drm/vkms: add missing platform_device_unregister() in vkms_init()
>
> Qinglang Miao <[email protected]>
> drm/vgem: add missing platform_device_unregister() in vgem_init()
>
> Tianjia Zhang <[email protected]>
> drm/amd/display: Fix wrong return value in dm_update_plane_state()
>
> Samuel Holland <[email protected]>
> Bluetooth: hci_uart: Cancel init work before unregistering
>
> Melissa Wen <[email protected]>
> drm/vkms: fix xrgb on compute crc
>
> Venkateswara Naralasetty <[email protected]>
> ath10k: provide survey info as accumulated data
>
> Yang Yang <[email protected]>
> blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
>
> Qu Wenruo <[email protected]>
> btrfs: add owner and fs_info to alloc_state io_tree
>
> Serge Semin <[email protected]>
> hwmon: (bt1-pvt) Wait for the completion with timeout
>
> Serge Semin <[email protected]>
> hwmon: (bt1-pvt) Cache current update timeout
>
> Serge Semin <[email protected]>
> hwmon: (bt1-pvt) Test sensor power supply on probe
>
> Łukasz Stelmach <[email protected]>
> spi: spi-s3c64xx: Check return values
>
> Łukasz Stelmach <[email protected]>
> spi: spi-s3c64xx: swap s3c64xx_spi_set_cs() and s3c64xx_enable_datapath()
>
> Necip Fazil Yildiran <[email protected]>
> pinctrl: bcm: fix kconfig dependency warning when !GPIOLIB
>
> Michał Mirosław <[email protected]>
> regulator: resolve supply after creating regulator
>
> Qiushi Wu <[email protected]>
> media: ti-vpe: Fix a missing check and reference count leak
>
> Qiushi Wu <[email protected]>
> media: stm32-dcmi: Fix a reference count leak
>
> Qiushi Wu <[email protected]>
> media: s5p-mfc: Fix a reference count leak
>
> Qiushi Wu <[email protected]>
> media: camss: Fix a reference count leak.
>
> Qiushi Wu <[email protected]>
> media: platform: fcp: Fix a reference count leak.
>
> Qiushi Wu <[email protected]>
> media: rockchip/rga: Fix a reference count leak.
>
> Qiushi Wu <[email protected]>
> media: rcar-vin: Fix a reference count leak.
>
> Tom Rix <[email protected]>
> media: tc358743: cleanup tc358743_cec_isr
>
> Tom Rix <[email protected]>
> media: tc358743: initialize variable
>
> Dinghao Liu <[email protected]>
> media: mx2_emmaprp: Fix memleak in emmaprp_probe
>
> Corentin Labbe <[email protected]>
> crypto: sun8i-ce - handle endianness of t_common_ctl
>
> Nicolas Toromanoff <[email protected]>
> crypto: stm32/crc32 - Avoid lock if hardware is already used
>
> Xiaoliang Pang <[email protected]>
> cypto: mediatek - fix leaks in mtk_desc_ring_alloc
>
> Dan Carpenter <[email protected]>
> hwmon: (w83627ehf) Fix a resource leak in probe
>
> Guenter Roeck <[email protected]>
> hwmon: (pmbus/max34440) Fix status register reads for MAX344{51,60,61}
>
> Tero Kristo <[email protected]>
> crypto: omap-sham - fix digcnt register handling with export/import
>
> Jay Fang <[email protected]>
> spi: dw-pci: free previously allocated IRQs if desc->setup() fails
>
> Eddie James <[email protected]>
> spi: fsi: Implement restricted size for certain controllers
>
> Brad Bishop <[email protected]>
> spi: fsi: Fix use of the bneq+ sequencer instruction
>
> Brad Bishop <[email protected]>
> spi: fsi: Handle 9 to 15 byte transfers lengths
>
> Laurent Pinchart <[email protected]>
> media: rcar-csi2: Allocate v4l2_async_subdev dynamically
>
> Laurent Pinchart <[email protected]>
> media: rcar_drif: Allocate v4l2_async_subdev dynamically
>
> Laurent Pinchart <[email protected]>
> media: rcar_drif: Fix fwnode reference leak when parsing DT
>
> Lad Prabhakar <[email protected]>
> media: i2c: ov5640: Enable data pins on poweron for DVP mode
>
> Lad Prabhakar <[email protected]>
> media: i2c: ov5640: Separate out mipi configuration from s_power
>
> Lad Prabhakar <[email protected]>
> media: i2c: ov5640: Remain in power down for DVP mode unless streaming
>
> Dinghao Liu <[email protected]>
> media: omap3isp: Fix memleak in isp_probe
>
> Christophe JAILLET <[email protected]>
> media: staging/intel-ipu3: css: Correctly reset some memory
>
> Laurent Pinchart <[email protected]>
> media: uvcvideo: Silence shift-out-of-bounds warning
>
> Laurent Pinchart <[email protected]>
> media: uvcvideo: Set media controller entity functions
>
> Eric Biggers <[email protected]>
> fscrypt: restrict IV_INO_LBLK_32 to ino_bits <= 32
>
> Tom Rix <[email protected]>
> media: m5mols: Check function pointer in m5mols_sensor_power
>
> Paul Kocialkowski <[email protected]>
> media: ov5640: Correct Bit Div register in clock tree diagram
>
> Ezequiel Garcia <[email protected]>
> media: hantro: postproc: Fix motion vector space allocation
>
> Ezequiel Garcia <[email protected]>
> media: hantro: h264: Get the correct fallback reference buffer
>
> Sylwester Nawrocki <[email protected]>
> media: Revert "media: exynos4-is: Add missed check for pinctrl_lookup_state()"
>
> [email protected] <[email protected]>
> crypto: ccree - fix runtime PM imbalance on error
>
> Tom Rix <[email protected]>
> media: tuner-simple: fix regression in simple_set_radio_freq
>
> Peilin Ye <[email protected]>
> media: vivid: Fix global-out-of-bounds read in precalculate_color()
>
> Madhuparna Bhowmik <[email protected]>
> crypto: picoxcell - Fix potential race condition bug
>
> Christophe JAILLET <[email protected]>
> crypto: ixp4xx - Fix the size used in a 'dma_free_coherent()' call
>
> Tianjia Zhang <[email protected]>
> crypto: mediatek - Fix wrong return value in mtk_desc_ring_alloc()
>
> Herbert Xu <[email protected]>
> crypto: algif_skcipher - EBUSY on aio should be an error
>
> Jiri Olsa <[email protected]>
> perf/core: Fix race in the perf_mmap_close() function
>
> Sasha Levin <[email protected]>
> perf/x86: Fix n_pair for cancelled txn
>
> Maulik Shah <[email protected]>
> pinctrl: qcom: Use return value from irq_set_wake() call
>
> Maulik Shah <[email protected]>
> pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags
>
> Colin Ian King <[email protected]>
> x86/events/amd/iommu: Fix sizeof mismatch
>
> Libing Zhou <[email protected]>
> x86/nmi: Fix nmi_handle() duration miscalculation
>
> Kan Liang <[email protected]>
> perf/x86/intel/uncore: Fix the scale of the IMC free-running events
>
> Kan Liang <[email protected]>
> perf/x86/intel/uncore: Reduce the number of CBOX counters
>
> Kan Liang <[email protected]>
> perf/x86/intel/uncore: Update Ice Lake uncore units
>
> Alexandru Elisei <[email protected]>
> arm64: perf: Add missing ISB in armv8pmu_enable_counter()
>
> Barry Song <[email protected]>
> sched/fair: Use dst group while checking imbalance for NUMA balancer
>
> Xunlei Pang <[email protected]>
> sched/fair: Fix wrong cpu selecting from isolated domain
>
> Mark Salter <[email protected]>
> drivers/perf: thunderx2_pmu: Fix memory resource error handling
>
> Mark Salter <[email protected]>
> drivers/perf: xgene_pmu: Fix uninitialized resource struct
>
> Amit Daniel Kachhap <[email protected]>
> arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
>
> Arvind Sankar <[email protected]>
> x86/fpu: Allow multiple bits in clearcpuid= parameter
>
> Kan Liang <[email protected]>
> perf/x86/intel/ds: Fix x86_pmu_stop warning for large PEBS
>
> Krzysztof Kozlowski <[email protected]>
> EDAC/ti: Fix handling of platform_get_irq() error
>
> Krzysztof Kozlowski <[email protected]>
> EDAC/aspeed: Fix handling of platform_get_irq() error
>
> Dinghao Liu <[email protected]>
> EDAC/i5100: Fix error handling order in i5100_init_one()
>
> Randy Dunlap <[email protected]>
> microblaze: fix kbuild redundant file warning
>
> Lukasz Luba <[email protected]>
> sched/fair: Fix wrong negative conversion in find_energy_efficient_cpu()
>
> Luca Stefani <[email protected]>
> RAS/CEC: Fix cec_init() prototype
>
> Andrei Botila <[email protected]>
> crypto: caam/qi - add support for more XTS key lengths
>
> Andrei Botila <[email protected]>
> crypto: caam/qi - add fallback for XTS with more than 8B IV
>
> Herbert Xu <[email protected]>
> crypto: algif_aead - Do not set MAY_BACKLOG on the async path
>
> Roberto Sassu <[email protected]>
> ima: Don't ignore errors from crypto_shash_update()
>
> Suravee Suthikulpanit <[email protected]>
> KVM: SVM: Initialize prev_ga_tag before use
>
> Lai Jiangshan <[email protected]>
> KVM: x86: Intercept LA57 to inject #GP fault when it's reserved
>
> Sean Christopherson <[email protected]>
> KVM: x86/mmu: Commit zap of remaining invalid pages when recovering lpages
>
> Sean Christopherson <[email protected]>
> KVM: nVMX: Reload vmcs01 if getting vmcs12's pages fails
>
> Sean Christopherson <[email protected]>
> KVM: nVMX: Reset the segment cache when stuffing guest segs
>
> Sean Christopherson <[email protected]>
> KVM: nVMX: Morph notification vector IRQ on nested VM-Enter to pending PI
>
> Marc Zyngier <[email protected]>
> arm64: Make use of ARCH_WORKAROUND_1 even when KVM is not enabled
>
> Steve French <[email protected]>
> smb3: fix stat when special device file and mounted with modefromsid
>
> Steve French <[email protected]>
> smb3: do not try to cache root directory if dir leases not supported
>
> Steve French <[email protected]>
> SMB3.1.1: Fix ids returned in POSIX query dir
>
> Rohith Surabattula <[email protected]>
> SMB3: Resolve data corruption of TCP server info fields
>
> Shyam Prasad N <[email protected]>
> cifs: Return the error from crypt_message when enc/dec key not found.
>
> Dan Carpenter <[email protected]>
> cifs: remove bogus debug code
>
> Jian-Hong Pan <[email protected]>
> ALSA: hda/realtek: Enable audio jacks of ASUS D700SA with ALC887
>
> Qiu Wenbo <[email protected]>
> ALSA: hda/realtek - Add mute Led support for HP Elitebook 845 G7
>
> Hui Wang <[email protected]>
> ALSA: hda/realtek - set mic to auto detect on a HP AIO machine
>
> Jeremy Szu <[email protected]>
> ALSA: hda/realtek - The front Mic on a HP machine doesn't work
>
> Lukasz Halman <[email protected]>
> ALSA: usb-audio: Line6 Pod Go interface requires static clock rate quirk
>
> Hui Wang <[email protected]>
> ALSA: hda - Fix the return value if cb func is already registered
>
> Hui Wang <[email protected]>
> ALSA: hda - Don't register a cb func if it is registered already
>
> Guillaume Nault <[email protected]>
> net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
>
> Bartosz Golaszewski <[email protected]>
> net: ethernet: mtk-star-emac: select REGMAP_MMIO
>
> Neal Cardwell <[email protected]>
> tcp: fix to update snd_wl1 in bulk receiver fast path
>
> Po-Hsu Lin <[email protected]>
> selftests: rtnetlink: load fou module for kci_test_encap_fou() test
>
> Ido Schimmel <[email protected]>
> selftests: forwarding: Add missing 'rp_filter' configuration
>
> Heiner Kallweit <[email protected]>
> r8169: fix operation under forced interrupt threading
>
> Defang Bo <[email protected]>
> nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()
>
> Ido Schimmel <[email protected]>
> nexthop: Fix performance regression in nexthop deletion
>
> Davide Caratti <[email protected]>
> net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
>
> Roi Dayan <[email protected]>
> net/sched: act_ct: Fix adding udp port mangle operation
>
> Ke Li <[email protected]>
> net: Properly typecast int values to set sk_max_pacing_rate
>
> Xie He <[email protected]>
> net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
>
> Xie He <[email protected]>
> net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
>
> Dylan Hung <[email protected]>
> net: ftgmac100: Fix Aspeed ast2600 TX hang issue
>
> Geliang Tang <[email protected]>
> mptcp: initialize mptcp_options_received's ahmac
>
> Eric Dumazet <[email protected]>
> icmp: randomize the global rate limiter
>
> Lijun Pan <[email protected]>
> ibmvnic: save changed mac address to adapter->mac_addr
>
> Vinay Kumar Yadav <[email protected]>
> chelsio/chtls: fix writing freed memory
>
> Vinay Kumar Yadav <[email protected]>
> chelsio/chtls: correct function return and return type
>
> Vinay Kumar Yadav <[email protected]>
> chelsio/chtls: Fix panic when listen on multiadapter
>
> Vinay Kumar Yadav <[email protected]>
> chelsio/chtls: fix panic when server is on ipv6
>
> Vinay Kumar Yadav <[email protected]>
> chelsio/chtls: correct netdevice for vlan interface
>
> Vinay Kumar Yadav <[email protected]>
> chelsio/chtls: fix socket lock
>
> Hoang Huu Le <[email protected]>
> tipc: fix incorrect setting window for bcast link
>
> Hoang Huu Le <[email protected]>
> tipc: re-configure queue limit for broadcast link
>
> Kai Vehmanen <[email protected]>
> ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
>
> Kai Vehmanen <[email protected]>
> ALSA: hda: fix jack detection with Realtek codecs when in D3
>
> Dan Carpenter <[email protected]>
> ALSA: bebob: potential info leak in hwdep_read()
>
> Todd Kjos <[email protected]>
> binder: fix UAF when releasing todo list
>
> Heiner Kallweit <[email protected]>
> r8169: fix data corruption issue on RTL8402
>
> Cong Wang <[email protected]>
> net_sched: remove a redundant goto chain check
>
> Maciej Żenczykowski <[email protected]>
> net/ipv4: always honour route mtu during forwarding
>
> Marc Kleine-Budde <[email protected]>
> net: j1939: j1939_session_fresh_new(): fix missing initialization of skbcnt
>
> Cong Wang <[email protected]>
> can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt
>
> Lucas Stach <[email protected]>
> can: m_can_platform: don't call m_can_class_suspend in runtime suspend
>
> Christian Eggers <[email protected]>
> socket: don't clear SOCK_TSTAMP_NEW when SO_TIMESTAMPNS is disabled
>
> Christian Eggers <[email protected]>
> socket: fix option SO_TIMESTAMPING_NEW
>
> Cong Wang <[email protected]>
> tipc: fix the skb_unshare() in tipc_buf_append()
>
> Wilken Gottwalt <[email protected]>
> net: usb: qmi_wwan: add Cellient MPL200 card
>
> Rohit Maheshwari <[email protected]>
> net/tls: sendfile fails with ktls offload
>
> Karsten Graul <[email protected]>
> net/smc: fix valid DMBE buffer sizes
>
> Karsten Graul <[email protected]>
> net/smc: fix use-after-free of delayed events
>
> Leon Romanovsky <[email protected]>
> net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
>
> Davide Caratti <[email protected]>
> net: mptcp: make DACK4/DACK8 usage consistent among all subflows
>
> Alex Elder <[email protected]>
> net: ipa: skip suspend/resume activities if not set up
>
> Yonghong Song <[email protected]>
> net: fix pos incrementment in ipv6_route_seq_next
>
> Marek Vasut <[email protected]>
> net: fec: Fix PHY init after phy_reset_after_clk_enable()
>
> Marek Vasut <[email protected]>
> net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()
>
> Christian Eggers <[email protected]>
> net: dsa: microchip: fix race condition
>
> Jonathan Lemon <[email protected]>
> mlx4: handle non-napi callers to napi_poll
>
> David Ahern <[email protected]>
> ipv4: Restore flowi4_oif update before call to xfrm_lookup_route
>
> David Wilder <[email protected]>
> ibmveth: Identify ingress large send packets.
>
> David Wilder <[email protected]>
> ibmveth: Switch order of ibmveth_helper calls.
>
> Herat Ramani <[email protected]>
> xgb4: handle 4-tuple PEDIT to NAT mode translation
>
>
> -------------
>
> Diffstat:
>
> Documentation/admin-guide/kernel-parameters.txt | 2 +-
> .../crypto/allwinner,sun4i-a10-crypto.yaml | 7 +-
> .../devicetree/bindings/net/socionext-netsec.txt | 4 +-
> Documentation/networking/ip-sysctl.rst | 4 +-
> Makefile | 4 +-
> arch/arc/plat-hsdk/Kconfig | 1 +
> arch/arm/boot/dts/imx6sl.dtsi | 2 +
> arch/arm/boot/dts/iwg20d-q7-common.dtsi | 15 +-
> arch/arm/boot/dts/meson8.dtsi | 2 -
> arch/arm/boot/dts/owl-s500.dtsi | 6 +-
> arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 2 -
> arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 35 +--
> arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 38 ++-
> arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 6 +-
> arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 10 +-
> arch/arm/mach-at91/pm.c | 1 +
> arch/arm/mach-omap2/cpuidle44xx.c | 4 +-
> arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
> arch/arm/mach-s3c24xx/mach-h1940.c | 4 +-
> arch/arm/mach-s3c24xx/mach-mini2440.c | 4 +-
> arch/arm/mach-s3c24xx/mach-n30.c | 4 +-
> arch/arm/mach-s3c24xx/mach-rx1950.c | 4 +-
> arch/arm/mm/cache-l2x0.c | 16 +-
> arch/arm64/boot/dts/actions/s700.dtsi | 2 +-
> arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 6 +-
> arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 +-
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 5 +-
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 10 +-
> arch/arm64/boot/dts/qcom/pm8916.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 6 +-
> arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 5 +-
> arch/arm64/boot/dts/renesas/r8a77990.dtsi | 5 +-
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 +-
> arch/arm64/include/asm/insn.h | 4 +
> arch/arm64/include/asm/memory.h | 5 +-
> arch/arm64/include/asm/pgtable.h | 4 +-
> arch/arm64/kernel/cpu_errata.c | 7 +-
> arch/arm64/kernel/insn.c | 5 +-
> arch/arm64/kernel/perf_event.c | 5 +
> arch/arm64/kernel/probes/decode-insn.c | 3 +-
> arch/arm64/mm/init.c | 30 +--
> arch/m68k/coldfire/device.c | 6 +-
> arch/microblaze/include/asm/Kbuild | 1 -
> arch/powerpc/include/asm/book3s/64/hash-4k.h | 13 +-
> arch/powerpc/include/asm/drmem.h | 39 ++-
> arch/powerpc/include/asm/hw_breakpoint.h | 1 +
> arch/powerpc/include/asm/reg.h | 2 +-
> arch/powerpc/include/asm/svm.h | 4 +
> arch/powerpc/include/asm/tlb.h | 13 -
> arch/powerpc/kernel/hw_breakpoint.c | 14 +-
> arch/powerpc/kernel/irq.c | 9 +-
> arch/powerpc/kernel/ptrace/ptrace-noadv.c | 1 +
> arch/powerpc/kernel/tau_6xx.c | 147 ++++------
> arch/powerpc/mm/book3s64/radix_tlb.c | 23 +-
> arch/powerpc/mm/drmem.c | 6 +-
> arch/powerpc/mm/kasan/kasan_init_32.c | 12 +-
> arch/powerpc/mm/mem.c | 6 +-
> arch/powerpc/perf/hv-gpci-requests.h | 6 +-
> arch/powerpc/perf/isa207-common.c | 10 +
> arch/powerpc/platforms/Kconfig | 14 +-
> arch/powerpc/platforms/powernv/opal-dump.c | 41 ++-
> arch/powerpc/platforms/pseries/hotplug-memory.c | 24 +-
> arch/powerpc/platforms/pseries/papr_scm.c | 3 +
> arch/powerpc/platforms/pseries/ras.c | 118 ++++----
> arch/powerpc/platforms/pseries/rng.c | 1 +
> arch/powerpc/platforms/pseries/svm.c | 26 ++
> arch/powerpc/sysdev/xics/icp-hv.c | 1 +
> arch/powerpc/xmon/xmon.c | 1 +
> arch/s390/pci/pci_bus.c | 5 +-
> arch/um/drivers/vector_kern.c | 4 +-
> arch/um/kernel/time.c | 14 +-
> arch/x86/boot/compressed/pgtable_64.c | 9 -
> arch/x86/events/amd/iommu.c | 2 +-
> arch/x86/events/core.c | 6 +-
> arch/x86/events/intel/ds.c | 32 ++-
> arch/x86/events/intel/uncore_snb.c | 31 ++-
> arch/x86/events/intel/uncore_snbep.c | 12 +-
> arch/x86/events/perf_event.h | 1 +
> arch/x86/include/asm/special_insns.h | 28 +-
> arch/x86/kernel/cpu/common.c | 4 +-
> arch/x86/kernel/cpu/mce/core.c | 99 +++++--
> arch/x86/kernel/cpu/mce/internal.h | 10 +
> arch/x86/kernel/cpu/mce/severity.c | 28 +-
> arch/x86/kernel/dumpstack.c | 3 +-
> arch/x86/kernel/fpu/init.c | 30 ++-
> arch/x86/kernel/nmi.c | 5 +-
> arch/x86/kvm/emulate.c | 2 +-
> arch/x86/kvm/ioapic.c | 5 +-
> arch/x86/kvm/kvm_cache_regs.h | 2 +-
> arch/x86/kvm/lapic.c | 7 +
> arch/x86/kvm/lapic.h | 1 +
> arch/x86/kvm/mmu/mmu.c | 1 +
> arch/x86/kvm/svm/avic.c | 1 +
> arch/x86/kvm/vmx/nested.c | 14 +-
> block/blk-core.c | 9 +-
> block/blk-mq-sysfs.c | 2 -
> block/blk-sysfs.c | 9 +-
> crypto/algif_aead.c | 7 +-
> crypto/algif_skcipher.c | 2 +-
> drivers/android/binder.c | 37 +--
> drivers/bluetooth/btusb.c | 1 +
> drivers/bluetooth/hci_ldisc.c | 1 +
> drivers/bluetooth/hci_serdev.c | 2 +
> drivers/bus/mhi/core/Makefile | 2 +-
> drivers/char/ipmi/ipmi_si_intf.c | 2 +-
> drivers/clk/at91/clk-main.c | 11 +-
> drivers/clk/bcm/clk-bcm2835.c | 4 +-
> drivers/clk/imx/clk-imx8mq.c | 4 +-
> drivers/clk/keystone/sci-clk.c | 2 +-
> drivers/clk/mediatek/clk-mt6779.c | 2 +
> drivers/clk/meson/axg-audio.c | 135 +++++++++-
> drivers/clk/meson/g12a.c | 11 +
> drivers/clk/qcom/gcc-sdm660.c | 2 +-
> drivers/clk/rockchip/clk-half-divider.c | 2 +-
> drivers/clocksource/hyperv_timer.c | 4 +-
> drivers/cpufreq/armada-37xx-cpufreq.c | 6 +
> drivers/cpufreq/powernv-cpufreq.c | 9 +-
> drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c | 5 +-
> drivers/crypto/caam/Kconfig | 1 +
> drivers/crypto/caam/caamalg_qi.c | 81 +++++-
> drivers/crypto/ccp/ccp-ops.c | 2 +-
> drivers/crypto/ccree/cc_pm.c | 6 +-
> drivers/crypto/chelsio/chtls/chtls_cm.c | 19 +-
> drivers/crypto/chelsio/chtls/chtls_io.c | 5 +-
> drivers/crypto/hisilicon/sec2/sec_crypto.c | 16 +-
> drivers/crypto/ixp4xx_crypto.c | 2 +-
> drivers/crypto/mediatek/mtk-platform.c | 8 +-
> drivers/crypto/omap-sham.c | 3 +
> drivers/crypto/picoxcell_crypto.c | 9 +-
> drivers/crypto/stm32/Kconfig | 1 +
> drivers/crypto/stm32/stm32-crc32.c | 15 +-
> drivers/dma/dmatest.c | 5 +-
> drivers/dma/dw/core.c | 4 +
> drivers/dma/dw/dw.c | 2 +-
> drivers/dma/dw/of.c | 7 +-
> drivers/dma/ioat/dma.c | 2 +-
> drivers/edac/aspeed_edac.c | 4 +-
> drivers/edac/i5100_edac.c | 11 +-
> drivers/edac/ti_edac.c | 3 +-
> drivers/firmware/arm_scmi/mailbox.c | 2 +-
> drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +-
> drivers/gpu/drm/amd/display/dc/core/dc.c | 2 +-
> .../gpu/drm/amd/display/dc/dce/dce_panel_cntl.c | 2 +-
> .../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 3 +
> .../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 3 +
> drivers/gpu/drm/drm_debugfs_crc.c | 4 +-
> drivers/gpu/drm/drm_gem_vram_helper.c | 28 +-
> drivers/gpu/drm/gma500/cdv_intel_dp.c | 2 +-
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +-
> drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c | 2 +-
> drivers/gpu/drm/msm/adreno/adreno_gpu.c | 10 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 8 +-
> drivers/gpu/drm/mxsfb/mxsfb_drv.c | 21 +-
> drivers/gpu/drm/panel/panel-simple.c | 4 +-
> drivers/gpu/drm/panfrost/panfrost_device.h | 3 +
> drivers/gpu/drm/panfrost/panfrost_drv.c | 11 +
> drivers/gpu/drm/panfrost/panfrost_gpu.c | 22 +-
> drivers/gpu/drm/panfrost/panfrost_gpu.h | 2 +
> drivers/gpu/drm/panfrost/panfrost_regs.h | 4 +
> drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 12 +
> drivers/gpu/drm/vgem/vgem_drv.c | 2 +-
> drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +
> drivers/gpu/drm/virtio/virtgpu_vq.c | 10 +-
> drivers/gpu/drm/vkms/vkms_composer.c | 2 +-
> drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
> drivers/hid/hid-ids.h | 2 +
> drivers/hid/hid-input.c | 4 +-
> drivers/hid/hid-ite.c | 4 +
> drivers/hid/hid-multitouch.c | 6 +
> drivers/hid/hid-roccat-kone.c | 23 +-
> drivers/hwmon/bt1-pvt.c | 138 +++++++---
> drivers/hwmon/bt1-pvt.h | 3 +
> drivers/hwmon/pmbus/max34440.c | 3 -
> drivers/hwmon/w83627ehf.c | 6 +-
> drivers/hwtracing/coresight/coresight-cti.c | 41 +--
> drivers/hwtracing/coresight/coresight-etm-perf.c | 14 +-
> .../hwtracing/coresight/coresight-etm4x-sysfs.c | 2 +-
> drivers/hwtracing/coresight/coresight-etm4x.c | 105 ++++----
> drivers/hwtracing/coresight/coresight-etm4x.h | 3 +
> drivers/hwtracing/coresight/coresight-platform.c | 10 +-
> drivers/hwtracing/coresight/coresight.c | 2 +-
> drivers/i2c/busses/Kconfig | 1 +
> drivers/i2c/i2c-core-acpi.c | 11 +-
> drivers/i3c/master.c | 19 +-
> drivers/i3c/master/i3c-master-cdns.c | 4 +-
> drivers/iio/adc/stm32-adc-core.c | 9 +-
> drivers/infiniband/core/cma.c | 300 +++++++++------------
> drivers/infiniband/core/cq.c | 30 +--
> drivers/infiniband/core/ucma.c | 6 +-
> drivers/infiniband/core/umem.c | 15 +-
> drivers/infiniband/core/verbs.c | 9 +-
> drivers/infiniband/hw/bnxt_re/ib_verbs.c | 3 +-
> drivers/infiniband/hw/bnxt_re/ib_verbs.h | 2 +-
> drivers/infiniband/hw/cxgb4/cq.c | 3 +-
> drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 2 +-
> drivers/infiniband/hw/efa/efa.h | 2 +-
> drivers/infiniband/hw/efa/efa_verbs.c | 3 +-
> drivers/infiniband/hw/hns/hns_roce_cq.c | 3 +-
> drivers/infiniband/hw/hns/hns_roce_device.h | 4 +-
> drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 4 +-
> drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 41 ++-
> drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 2 +
> drivers/infiniband/hw/hns/hns_roce_qp.c | 6 +-
> drivers/infiniband/hw/i40iw/i40iw.h | 9 +-
> drivers/infiniband/hw/i40iw/i40iw_cm.c | 10 +-
> drivers/infiniband/hw/i40iw/i40iw_hw.c | 4 +-
> drivers/infiniband/hw/i40iw/i40iw_utils.c | 59 +---
> drivers/infiniband/hw/i40iw/i40iw_verbs.c | 34 ++-
> drivers/infiniband/hw/i40iw/i40iw_verbs.h | 3 +-
> drivers/infiniband/hw/mlx4/cm.c | 3 +
> drivers/infiniband/hw/mlx4/cq.c | 3 +-
> drivers/infiniband/hw/mlx4/mad.c | 34 ++-
> drivers/infiniband/hw/mlx4/mlx4_ib.h | 4 +-
> drivers/infiniband/hw/mlx5/cq.c | 14 +-
> drivers/infiniband/hw/mlx5/main.c | 4 +-
> drivers/infiniband/hw/mlx5/mlx5_ib.h | 2 +-
> drivers/infiniband/hw/mlx5/mr.c | 64 ++---
> drivers/infiniband/hw/mthca/mthca_provider.c | 3 +-
> drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 3 +-
> drivers/infiniband/hw/ocrdma/ocrdma_verbs.h | 2 +-
> drivers/infiniband/hw/qedr/main.c | 2 +-
> drivers/infiniband/hw/qedr/qedr_iw_cm.c | 6 +-
> drivers/infiniband/hw/qedr/verbs.c | 63 +++--
> drivers/infiniband/hw/qedr/verbs.h | 2 +-
> drivers/infiniband/hw/usnic/usnic_ib_verbs.c | 4 +-
> drivers/infiniband/hw/usnic/usnic_ib_verbs.h | 2 +-
> drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c | 3 +-
> drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.h | 2 +-
> drivers/infiniband/sw/rdmavt/cq.c | 3 +-
> drivers/infiniband/sw/rdmavt/cq.h | 2 +-
> drivers/infiniband/sw/rdmavt/vt.c | 4 +-
> drivers/infiniband/sw/rxe/rxe_recv.c | 20 +-
> drivers/infiniband/sw/rxe/rxe_verbs.c | 3 +-
> drivers/infiniband/sw/siw/siw_verbs.c | 3 +-
> drivers/infiniband/sw/siw/siw_verbs.h | 2 +-
> drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +
> drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 11 +
> drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 2 +
> drivers/infiniband/ulp/rtrs/rtrs-srv.c | 76 +++++-
> drivers/infiniband/ulp/rtrs/rtrs-srv.h | 7 +
> drivers/input/keyboard/ep93xx_keypad.c | 4 +-
> drivers/input/keyboard/omap4-keypad.c | 6 +-
> drivers/input/keyboard/twl4030_keypad.c | 8 +-
> drivers/input/serio/sun4i-ps2.c | 9 +-
> drivers/input/touchscreen/elants_i2c.c | 2 +-
> drivers/input/touchscreen/imx6ul_tsc.c | 27 +-
> drivers/input/touchscreen/stmfts.c | 2 +-
> drivers/iommu/qcom_iommu.c | 8 +-
> drivers/lightnvm/core.c | 5 +-
> drivers/mailbox/mailbox.c | 12 +-
> drivers/mailbox/mtk-cmdq-mailbox.c | 8 +-
> drivers/md/md-bitmap.c | 3 +-
> drivers/md/md-cluster.c | 1 +
> drivers/media/firewire/firedtv-fw.c | 6 +-
> drivers/media/i2c/m5mols/m5mols_core.c | 3 +-
> drivers/media/i2c/ov5640.c | 196 ++++++++------
> drivers/media/i2c/tc358743.c | 14 +-
> drivers/media/pci/bt8xx/bttv-driver.c | 13 +-
> drivers/media/pci/saa7134/saa7134-tvaudio.c | 3 +-
> drivers/media/platform/exynos4-is/fimc-isp.c | 4 +-
> drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
> drivers/media/platform/exynos4-is/media-dev.c | 8 +-
> drivers/media/platform/exynos4-is/mipi-csis.c | 4 +-
> drivers/media/platform/mx2_emmaprp.c | 7 +-
> drivers/media/platform/omap3isp/isp.c | 6 +-
> drivers/media/platform/qcom/camss/camss-csiphy.c | 4 +-
> drivers/media/platform/qcom/venus/core.c | 20 +-
> drivers/media/platform/qcom/venus/vdec.c | 10 +-
> drivers/media/platform/rcar-fcp.c | 4 +-
> drivers/media/platform/rcar-vin/rcar-csi2.c | 24 +-
> drivers/media/platform/rcar-vin/rcar-dma.c | 4 +-
> drivers/media/platform/rcar_drif.c | 30 +--
> drivers/media/platform/rockchip/rga/rga-buf.c | 1 +
> drivers/media/platform/s3c-camif/camif-core.c | 5 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 4 +-
> drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 3 +-
> drivers/media/platform/sti/delta/delta-v4l2.c | 4 +-
> drivers/media/platform/sti/hva/hva-hw.c | 4 +-
> drivers/media/platform/stm32/stm32-dcmi.c | 4 +-
> drivers/media/platform/ti-vpe/vpe.c | 2 +
> drivers/media/platform/vsp1/vsp1_drv.c | 11 +-
> drivers/media/rc/ati_remote.c | 4 +
> drivers/media/test-drivers/vivid/vivid-meta-out.c | 9 +-
> drivers/media/tuners/tuner-simple.c | 5 +-
> drivers/media/usb/uvc/uvc_ctrl.c | 6 +-
> drivers/media/usb/uvc/uvc_entity.c | 35 +++
> drivers/media/usb/uvc/uvc_v4l2.c | 30 +++
> drivers/memory/fsl-corenet-cf.c | 6 +-
> drivers/memory/omap-gpmc.c | 8 +-
> drivers/mfd/sm501.c | 8 +-
> drivers/misc/cardreader/rtsx_pcr.c | 4 +-
> drivers/misc/eeprom/at25.c | 2 +-
> drivers/misc/habanalabs/gaudi/gaudi.c | 8 +-
> drivers/misc/habanalabs/goya/goya.c | 8 +-
> drivers/misc/mic/scif/scif_rma.c | 4 +-
> drivers/misc/mic/vop/vop_main.c | 2 +-
> drivers/misc/mic/vop/vop_vringh.c | 24 +-
> drivers/misc/ocxl/Kconfig | 3 +-
> drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 +-
> drivers/mmc/core/sdio_cis.c | 3 +
> drivers/mtd/hyperbus/hbmc-am654.c | 4 +-
> drivers/mtd/lpddr/lpddr2_nvm.c | 35 +--
> drivers/mtd/mtdoops.c | 11 +-
> drivers/mtd/nand/raw/ams-delta.c | 2 +
> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 2 +-
> drivers/mtd/nand/raw/vf610_nfc.c | 6 +-
> drivers/mtd/nand/spi/gigadevice.c | 14 +-
> drivers/net/can/flexcan.c | 34 ++-
> drivers/net/can/m_can/m_can_platform.c | 2 -
> drivers/net/dsa/microchip/ksz_common.c | 16 +-
> drivers/net/dsa/realtek-smi-core.h | 4 +-
> drivers/net/dsa/rtl8366.c | 280 ++++++++++---------
> drivers/net/dsa/rtl8366rb.c | 2 +-
> .../net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c | 175 +++++++++++-
> .../net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.h | 15 ++
> drivers/net/ethernet/cisco/enic/enic.h | 1 +
> drivers/net/ethernet/cisco/enic/enic_api.c | 6 +
> drivers/net/ethernet/cisco/enic/enic_main.c | 27 +-
> drivers/net/ethernet/faraday/ftgmac100.c | 5 +
> drivers/net/ethernet/faraday/ftgmac100.h | 8 +
> drivers/net/ethernet/freescale/fec_main.c | 35 ++-
> drivers/net/ethernet/ibm/ibmveth.c | 19 +-
> drivers/net/ethernet/ibm/ibmvnic.c | 10 +-
> drivers/net/ethernet/ibm/ibmvnic.h | 2 +-
> drivers/net/ethernet/korina.c | 3 +-
> drivers/net/ethernet/mediatek/Kconfig | 1 +
> drivers/net/ethernet/mellanox/mlx4/en_rx.c | 3 +
> drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +-
> .../net/ethernet/mellanox/mlx5/core/en/health.c | 2 +-
> .../net/ethernet/mellanox/mlx5/core/lib/clock.c | 5 +-
> drivers/net/ethernet/realtek/r8169_main.c | 12 +-
> drivers/net/ethernet/socionext/netsec.c | 24 +-
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 41 +--
> drivers/net/ipa/ipa_endpoint.c | 6 +
> drivers/net/usb/qmi_wwan.c | 1 +
> drivers/net/wan/hdlc.c | 10 +-
> drivers/net/wan/hdlc_raw_eth.c | 1 +
> drivers/net/wireless/ath/ath10k/ce.c | 2 +-
> drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +
> drivers/net/wireless/ath/ath10k/mac.c | 2 +-
> drivers/net/wireless/ath/ath11k/ahb.c | 10 +-
> drivers/net/wireless/ath/ath11k/mac.c | 4 +-
> drivers/net/wireless/ath/ath11k/qmi.c | 1 +
> drivers/net/wireless/ath/ath6kl/main.c | 3 +
> drivers/net/wireless/ath/ath6kl/wmi.c | 5 +
> drivers/net/wireless/ath/ath9k/hif_usb.c | 19 ++
> drivers/net/wireless/ath/ath9k/htc_hst.c | 2 +
> drivers/net/wireless/ath/wcn36xx/main.c | 2 +-
> .../wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +-
> .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 2 +
> .../broadcom/brcm80211/brcmsmac/phy/phy_lcn.c | 4 +-
> drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 8 +-
> drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 9 +-
> drivers/net/wireless/marvell/mwifiex/scan.c | 2 +-
> drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +
> drivers/net/wireless/marvell/mwifiex/usb.c | 3 +-
> drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 18 +-
> drivers/net/wireless/quantenna/qtnfmac/commands.c | 2 +
> .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 10 +-
> drivers/net/wireless/realtek/rtw88/main.c | 5 +
> drivers/net/wireless/realtek/rtw88/pci.c | 2 +
> drivers/net/wireless/realtek/rtw88/pci.h | 4 +-
> drivers/net/wireless/realtek/rtw88/phy.c | 5 +-
> drivers/ntb/hw/amd/ntb_hw_amd.c | 1 +
> drivers/ntb/hw/intel/ntb_hw_gen1.c | 2 +-
> drivers/nvme/target/core.c | 3 +-
> drivers/nvmem/core.c | 38 ++-
> drivers/opp/core.c | 6 +
> drivers/pci/controller/dwc/pcie-designware-ep.c | 3 +-
> drivers/pci/controller/pci-aardvark.c | 13 +-
> drivers/pci/controller/pci-hyperv.c | 50 +++-
> drivers/pci/controller/pcie-iproc-msi.c | 13 +-
> drivers/pci/iov.c | 1 +
> drivers/perf/thunderx2_pmu.c | 7 +-
> drivers/perf/xgene_pmu.c | 32 +--
> drivers/pinctrl/aspeed/pinctrl-aspeed.c | 2 +-
> drivers/pinctrl/bcm/Kconfig | 1 +
> drivers/pinctrl/devicetree.c | 5 +-
> drivers/pinctrl/pinctrl-mcp23s08.c | 24 +-
> drivers/pinctrl/qcom/pinctrl-msm.c | 10 +-
> drivers/platform/chrome/cros_ec_lightbar.c | 2 +
> drivers/platform/x86/mlx-platform.c | 15 +-
> drivers/pwm/pwm-img.c | 3 +-
> drivers/pwm/pwm-lpss.c | 7 +-
> drivers/pwm/pwm-rockchip.c | 5 +-
> drivers/rapidio/devices/rio_mport_cdev.c | 18 +-
> drivers/ras/cec.c | 9 +-
> drivers/regulator/core.c | 21 +-
> drivers/remoteproc/mtk_scp_ipi.c | 4 +-
> drivers/rpmsg/mtk_rpmsg.c | 9 +-
> drivers/rpmsg/qcom_smd.c | 32 ++-
> drivers/rtc/rtc-ds1307.c | 4 +
> drivers/s390/net/qeth_core.h | 6 +
> drivers/s390/net/qeth_l2_main.c | 59 +++-
> drivers/s390/net/qeth_l2_sys.c | 1 +
> drivers/scsi/be2iscsi/be_main.c | 4 +-
> drivers/scsi/bfa/bfad.c | 1 +
> drivers/scsi/csiostor/csio_hw.c | 2 +-
> drivers/scsi/ibmvscsi/ibmvfc.c | 1 +
> drivers/scsi/mpt3sas/mpt3sas_base.c | 14 +-
> drivers/scsi/mvumi.c | 1 +
> drivers/scsi/qedf/qedf_main.c | 2 +-
> drivers/scsi/qedi/qedi_fw.c | 23 +-
> drivers/scsi/qedi/qedi_iscsi.c | 2 +
> drivers/scsi/qedi/qedi_main.c | 10 +
> drivers/scsi/qla2xxx/qla_init.c | 10 +
> drivers/scsi/qla2xxx/qla_inline.h | 5 +
> drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
> drivers/scsi/qla2xxx/qla_nvme.c | 2 +-
> drivers/scsi/qla2xxx/qla_target.c | 2 +-
> drivers/scsi/qla4xxx/ql4_os.c | 2 +-
> drivers/scsi/smartpqi/smartpqi.h | 2 +-
> drivers/scsi/smartpqi/smartpqi_init.c | 101 ++++---
> drivers/scsi/ufs/ufs-mediatek.c | 6 -
> drivers/scsi/ufs/ufs-qcom.c | 5 -
> drivers/scsi/ufs/ufshcd.c | 3 +
> drivers/slimbus/core.c | 6 +-
> drivers/slimbus/qcom-ngd-ctrl.c | 4 +
> drivers/soc/fsl/qbman/bman.c | 2 +-
> drivers/soc/mediatek/mtk-cmdq-helper.c | 5 +-
> drivers/soc/qcom/apr.c | 2 +-
> drivers/soc/qcom/pdr_internal.h | 2 +-
> drivers/soc/xilinx/zynqmp_power.c | 2 +-
> drivers/spi/spi-dw-pci.c | 16 +-
> drivers/spi/spi-fsi.c | 99 +++++--
> drivers/spi/spi-omap2-mcspi.c | 17 +-
> drivers/spi/spi-s3c64xx.c | 52 +++-
> drivers/staging/emxx_udc/emxx_udc.c | 4 +-
> drivers/staging/media/atomisp/pci/sh_css.c | 2 +-
> drivers/staging/media/hantro/hantro_h264.c | 2 +-
> drivers/staging/media/hantro/hantro_postproc.c | 4 +-
> drivers/staging/media/ipu3/ipu3-css-params.c | 2 +-
> .../phy-rockchip-dphy-rx0/phy-rockchip-dphy-rx0.c | 1 +
> drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
> drivers/staging/wfx/data_rx.c | 2 +-
> drivers/staging/wilc1000/mon.c | 3 +-
> drivers/staging/wilc1000/sdio.c | 5 +-
> drivers/staging/wilc1000/spi.c | 5 +-
> drivers/target/target_core_user.c | 2 +-
> drivers/tty/hvc/Kconfig | 1 +
> drivers/tty/hvc/hvcs.c | 14 +-
> drivers/tty/ipwireless/network.c | 4 +-
> drivers/tty/ipwireless/tty.c | 2 +-
> drivers/tty/pty.c | 2 +-
> drivers/tty/serial/Kconfig | 1 +
> drivers/tty/serial/fsl_lpuart.c | 16 +-
> drivers/usb/cdns3/gadget.c | 2 +-
> drivers/usb/class/cdc-acm.c | 23 ++
> drivers/usb/class/cdc-wdm.c | 72 +++--
> drivers/usb/core/urb.c | 89 +++---
> drivers/usb/dwc2/gadget.c | 40 ++-
> drivers/usb/dwc2/params.c | 2 +-
> drivers/usb/dwc2/platform.c | 6 +-
> drivers/usb/dwc3/core.c | 60 +++--
> drivers/usb/dwc3/core.h | 7 +
> drivers/usb/dwc3/dwc3-of-simple.c | 1 +
> drivers/usb/gadget/function/f_ncm.c | 8 +-
> drivers/usb/gadget/function/f_printer.c | 16 +-
> drivers/usb/gadget/function/u_ether.c | 2 +-
> drivers/usb/gadget/function/u_serial.c | 1 +
> drivers/usb/gadget/udc/bcm63xx_udc.c | 1 +
> drivers/usb/host/ohci-hcd.c | 16 +-
> drivers/usb/host/xhci.c | 3 +-
> drivers/vfio/pci/vfio_pci_config.c | 24 +-
> drivers/vfio/pci/vfio_pci_intrs.c | 4 +-
> drivers/vfio/vfio.c | 9 +-
> drivers/vfio/vfio_iommu_type1.c | 6 +-
> drivers/video/backlight/sky81452-backlight.c | 1 +
> drivers/video/fbdev/aty/radeon_base.c | 2 +-
> drivers/video/fbdev/core/fbmem.c | 4 +
> drivers/video/fbdev/sis/init.c | 11 +-
> drivers/video/fbdev/vga16fb.c | 14 +-
> drivers/virt/fsl_hypervisor.c | 17 +-
> drivers/watchdog/sp5100_tco.h | 2 +-
> drivers/watchdog/watchdog_dev.c | 6 +-
> fs/afs/cell.c | 283 +++++++++++--------
> fs/afs/dynroot.c | 23 +-
> fs/afs/internal.h | 15 +-
> fs/afs/main.c | 2 +-
> fs/afs/mntpt.c | 4 +-
> fs/afs/proc.c | 23 +-
> fs/afs/super.c | 16 +-
> fs/afs/vl_alias.c | 8 +-
> fs/afs/vl_rotate.c | 2 +-
> fs/afs/volume.c | 4 +-
> fs/btrfs/extent-io-tree.h | 1 +
> fs/btrfs/volumes.c | 7 +-
> fs/cifs/asn1.c | 16 +-
> fs/cifs/cifsacl.c | 5 +-
> fs/cifs/cifsproto.h | 2 +
> fs/cifs/connect.c | 5 +-
> fs/cifs/readdir.c | 5 +-
> fs/cifs/smb2ops.c | 21 +-
> fs/crypto/policy.c | 9 +-
> fs/d_path.c | 6 +-
> fs/dlm/config.c | 3 +
> fs/ext4/ext4.h | 2 +-
> fs/ext4/fsmap.c | 3 +
> fs/ext4/mballoc.c | 37 ++-
> fs/f2fs/inode.c | 7 +
> fs/f2fs/sysfs.c | 1 +
> fs/iomap/buffered-io.c | 25 +-
> fs/iomap/direct-io.c | 10 +
> fs/nfs/fs_context.c | 1 +
> fs/ntfs/inode.c | 6 +
> fs/proc/base.c | 3 +-
> fs/quota/quota_v2.c | 1 +
> fs/ramfs/file-nommu.c | 2 +-
> fs/reiserfs/inode.c | 3 +-
> fs/reiserfs/super.c | 8 +-
> fs/udf/inode.c | 25 +-
> fs/udf/super.c | 6 +
> fs/xfs/libxfs/xfs_rtbitmap.c | 11 +-
> fs/xfs/xfs_buf_item_recover.c | 2 +
> fs/xfs/xfs_file.c | 17 +-
> fs/xfs/xfs_fsmap.c | 48 ++--
> fs/xfs/xfs_fsmap.h | 6 +-
> fs/xfs/xfs_ioctl.c | 144 ++++++----
> fs/xfs/xfs_rtalloc.c | 11 +
> include/linux/bpf_verifier.h | 1 +
> include/linux/mailbox/mtk-cmdq-mailbox.h | 3 +-
> include/linux/oom.h | 1 +
> include/linux/overflow.h | 1 +
> include/linux/page_owner.h | 6 +-
> include/linux/pci.h | 1 +
> include/linux/platform_data/dma-dw.h | 2 +
> include/linux/sched/coredump.h | 1 +
> include/linux/soc/mediatek/mtk-cmdq.h | 5 +-
> include/net/ip.h | 6 +
> include/net/netfilter/nf_log.h | 1 +
> include/net/tc_act/tc_tunnel_key.h | 5 +-
> include/rdma/ib_umem.h | 9 +-
> include/rdma/ib_verbs.h | 68 +----
> include/scsi/scsi_common.h | 7 +
> include/sound/hda_codec.h | 1 +
> include/trace/events/target.h | 12 +-
> include/uapi/linux/pci_regs.h | 1 +
> include/uapi/linux/perf_event.h | 2 +-
> kernel/bpf/percpu_freelist.c | 101 ++++++-
> kernel/bpf/percpu_freelist.h | 1 +
> kernel/bpf/verifier.c | 34 +++
> kernel/debug/kdb/kdb_io.c | 8 +-
> kernel/events/core.c | 7 +-
> kernel/fork.c | 21 ++
> kernel/module.c | 13 +-
> kernel/power/hibernate.c | 11 -
> kernel/rcu/rcutorture.c | 13 +-
> kernel/rcu/tree.c | 2 +-
> kernel/sched/core.c | 2 +-
> kernel/sched/fair.c | 20 +-
> kernel/sched/sched.h | 13 +-
> kernel/trace/trace_events_synth.c | 18 +-
> lib/crc32.c | 2 +-
> lib/idr.c | 1 +
> mm/filemap.c | 8 +-
> mm/huge_memory.c | 2 +-
> mm/memcontrol.c | 5 +-
> mm/oom_kill.c | 2 +
> mm/page_alloc.c | 4 +-
> mm/page_owner.c | 4 +-
> mm/swapfile.c | 4 +-
> net/bluetooth/hci_core.c | 11 +
> net/bluetooth/l2cap_sock.c | 7 +-
> net/bridge/netfilter/ebt_dnat.c | 2 +-
> net/bridge/netfilter/ebt_redirect.c | 2 +-
> net/bridge/netfilter/ebt_snat.c | 2 +-
> net/can/j1939/transport.c | 2 +
> net/core/filter.c | 3 +-
> net/core/skmsg.c | 14 +-
> net/core/sock.c | 13 +-
> net/ipv4/icmp.c | 7 +-
> net/ipv4/ip_gre.c | 15 +-
> net/ipv4/netfilter/nf_log_arp.c | 19 +-
> net/ipv4/netfilter/nf_log_ipv4.c | 6 +-
> net/ipv4/nexthop.c | 2 +-
> net/ipv4/route.c | 4 +-
> net/ipv4/tcp_input.c | 2 +
> net/ipv6/ip6_fib.c | 4 +-
> net/ipv6/netfilter/nf_log_ipv6.c | 8 +-
> net/mac80211/cfg.c | 3 +-
> net/mac80211/sta_info.c | 4 +
> net/mptcp/options.c | 3 +-
> net/mptcp/protocol.h | 2 +-
> net/mptcp/subflow.c | 3 +-
> net/netfilter/ipvs/ip_vs_ctl.c | 7 +-
> net/netfilter/ipvs/ip_vs_xmit.c | 6 +
> net/netfilter/nf_conntrack_proto_tcp.c | 19 +-
> net/netfilter/nf_dup_netdev.c | 1 +
> net/netfilter/nf_log_common.c | 12 +
> net/netfilter/nft_fwd_netdev.c | 1 +
> net/nfc/netlink.c | 2 +-
> net/sched/act_api.c | 14 -
> net/sched/act_ct.c | 4 +-
> net/sched/act_tunnel_key.c | 2 +-
> net/sched/cls_api.c | 2 +-
> net/smc/smc_core.c | 2 +-
> net/smc/smc_llc.c | 13 +-
> net/sunrpc/auth_gss/svcauth_gss.c | 27 +-
> net/sunrpc/xprtrdma/svc_rdma_sendto.c | 3 +-
> net/tipc/bcast.c | 10 +-
> net/tipc/msg.c | 3 +-
> net/tls/tls_device.c | 11 +-
> net/wireless/nl80211.c | 21 +-
> samples/bpf/xdpsock_user.c | 10 +-
> samples/mic/mpssd/mpssd.c | 4 +-
> scripts/package/builddeb | 6 +-
> scripts/package/mkdebian | 19 +-
> security/integrity/ima/ima_crypto.c | 2 +
> security/integrity/ima/ima_main.c | 10 +
> sound/core/seq/oss/seq_oss.c | 7 +-
> sound/firewire/bebob/bebob_hwdep.c | 3 +-
> sound/pci/hda/hda_intel.c | 14 +-
> sound/pci/hda/hda_jack.c | 22 +-
> sound/pci/hda/patch_ca0132.c | 24 +-
> sound/pci/hda/patch_hdmi.c | 20 +-
> sound/pci/hda/patch_realtek.c | 56 ++++
> sound/soc/codecs/Kconfig | 1 +
> sound/soc/codecs/tas2770.c | 93 +++----
> sound/soc/codecs/tlv320adcx140.c | 2 +-
> sound/soc/codecs/tlv320aic32x4.c | 9 +-
> sound/soc/codecs/wm_adsp.c | 20 +-
> sound/soc/fsl/fsl_sai.c | 19 +-
> sound/soc/fsl/fsl_sai.h | 1 +
> sound/soc/fsl/imx-es8328.c | 12 +-
> sound/soc/intel/boards/sof_rt5682.c | 13 +
> sound/soc/qcom/lpass-cpu.c | 16 --
> sound/soc/qcom/lpass-platform.c | 3 +-
> sound/soc/soc-topology.c | 11 +
> sound/soc/sof/control.c | 11 +
> sound/soc/sof/intel/hda.c | 8 +-
> sound/soc/sof/sof-pci-dev.c | 24 ++
> sound/usb/format.c | 1 +
> tools/build/Makefile.feature | 5 +-
> tools/build/feature/Makefile | 2 +-
> tools/build/feature/test-all.c | 10 -
> tools/lib/bpf/libbpf.c | 57 ++--
> tools/lib/perf/evlist.c | 3 +
> tools/perf/Makefile.config | 4 +-
> tools/perf/Makefile.perf | 6 +-
> tools/perf/builtin-stat.c | 4 +-
> tools/perf/builtin-trace.c | 6 +-
> tools/perf/builtin-version.c | 1 -
> tools/perf/util/intel-pt.c | 8 +-
> tools/testing/radix-tree/idr-test.c | 29 ++
> tools/testing/selftests/bpf/bench.c | 3 -
> tools/testing/selftests/bpf/benchs/bench_rename.c | 17 --
> tools/testing/selftests/bpf/prog_tests/bpf_iter.c | 14 +-
> tools/testing/selftests/bpf/prog_tests/sk_assign.c | 2 +-
> .../testing/selftests/bpf/prog_tests/sockopt_sk.c | 4 +-
> .../selftests/bpf/prog_tests/test_overhead.c | 14 +-
> tools/testing/selftests/bpf/progs/test_overhead.c | 6 -
> .../selftests/bpf/progs/test_sysctl_loop1.c | 4 +-
> .../selftests/bpf/progs/test_sysctl_loop2.c | 4 +-
> tools/testing/selftests/bpf/progs/test_vmlinux.c | 12 +-
> .../trigger-inter-event-combined-hist.tc | 8 +-
> tools/testing/selftests/lkdtm/run.sh | 2 +-
> tools/testing/selftests/net/config | 1 +
> .../selftests/net/forwarding/vxlan_asymmetric.sh | 10 +
> .../selftests/net/forwarding/vxlan_symmetric.sh | 10 +
> tools/testing/selftests/net/mptcp/mptcp_connect.sh | 4 +-
> tools/testing/selftests/net/mptcp/mptcp_join.sh | 4 +-
> tools/testing/selftests/net/rtnetlink.sh | 5 +
> tools/testing/selftests/powerpc/eeh/eeh-basic.sh | 9 +-
> tools/testing/selftests/vm/config | 1 +
> 665 files changed, 5459 insertions(+), 2941 deletions(-)
>
>
--
software engineer
rajagiri school of engineering and technology - autonomous
Retry
On Wed, Oct 28, 2020 at 10:11:38AM -0700, Guenter Roeck wrote:
> On Tue, Oct 27, 2020 at 02:45:43PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.8.17 release.
> > There are 633 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 29 Oct 2020 13:53:43 +0000.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 154 pass: 154 fail: 0
> Qemu test results:
> total: 426 pass: 426 fail: 0
>
> Tested-by: Guenter Roeck <[email protected]>
>
> Guenter
On Tue, 27 Oct 2020 at 20:22, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.8.17 release.
> There are 633 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 29 Oct 2020 13:53:43 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.8.17-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.8.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
NOTE:
The Kunit test is a part of the LKFT test plan from now on 5.8, 5.9 and
Linus mainline and Linux next master branches.
Summary
------------------------------------------------------------------------
kernel: 5.8.17-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.8.y
git commit: 5be39e9f29ceb931a3c8bfa71a3f18345bb6d3d5
git describe: v5.8.16-634-g5be39e9f29ce
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.8.y/build/v5.8.16-634-g5be39e9f29ce
No regressions (compared to build v5.8.16)
No fixes (compared to build v5.8.16)
Ran 42308 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* linux-log-parser
* ltp-containers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* libhugetlbfs
* ltp-commands-tests
* ltp-controllers-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-tracing-tests
* network-basic-tests
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-open-posix-tests
* ltp-sched-tests
* kunit
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org