Some of the changes this version are:
* Fixed a bounds checking bug in cpumask_any_housekeeping(),
* Moved the kfree() of rmid_ptrs[] later,
Changes are noted in each patch, I've not added 'no changes' notes
if these need double checking anyway. I'll try again next series.
~
This series does two things, it changes resctrl to call resctrl_arch_rmid_read()
in a way that works for MPAM, and it separates the locking so that the arch code
and filesystem code don't have to share a mutex. I tried to split this as two
series, but these touch similar call sites, so it would create more work.
(What's MPAM? See the cover letter of the first series. [1])
On x86 the RMID is an independent number. MPAMs equivalent is PMG, but this
isn't an independent number - it extends the PARTID (same as CLOSID) space
with bits that aren't used to select the configuration. The monitors can
then be told to match specific PMG values, allowing monitor-groups to be
created.
But, MPAM expects the monitors to always monitor by PARTID. The
Cache-storage-utilisation counters can only work this way.
(In the MPAM spec not setting the MATCH_PARTID bit is made CONSTRAINED
UNPREDICTABLE - which is Arm's term to mean portable software can't rely on
this)
It gets worse, as some SoCs may have very few PMG bits. I've seen the
datasheet for one that has a single bit of PMG space.
To be usable, MPAM's counters always need the PARTID and the PMG.
For resctrl, this means always making the CLOSID available when the RMID
is used.
To ensure RMID are always unique, this series combines the CLOSID and RMID
into an index, and manages RMID based on that. For x86, the index and RMID
would always be the same.
Currently the architecture specific code in the cpuhp callbacks takes the
rdtgroup_mutex. This means the filesystem code would have to export this
lock, resulting in an ill-defined interface between the two, and the possibility
of cross-architecture lock-ordering head aches.
The second part of this series adds a domain_list_lock to protect writes to the
domain list, and protects the domain list with RCU - or cpus_read_lock().
Use of RCU is to allow lockless readers of the domain list. To get MPAMs monitors
working, its very likely they'll need to be plumbed up to perf. An uncore PMU
driver would need to be a lockless reader of the domain list.
This series is based on v6.7-rc2, and can be retrieved from:
https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/monitors_and_locking/v8
Bugs welcome,
Thanks,
James
[1] https://lore.kernel.org/lkml/[email protected]/
[v1] https://lore.kernel.org/all/[email protected]/
[v2] https://lore.kernel.org/lkml/[email protected]/
[v3] https://lore.kernel.org/r/[email protected]/
[v4] https://lore.kernel.org/r/[email protected]/
[v5] https://lore.kernel.org/lkml/[email protected]/
[v6] https://lore.kernel.org/all/[email protected]/
[v7] https://lore.kernel.org/r/[email protected]/
James Morse (24):
tick/nohz: Move tick_nohz_full_mask declaration outside the #ifdef
x86/resctrl: kfree() rmid_ptrs from resctrl_exit()
x86/resctrl: Create helper for RMID allocation and mondata dir
creation
x86/resctrl: Move rmid allocation out of mkdir_rdt_prepare()
x86/resctrl: Track the closid with the rmid
x86/resctrl: Access per-rmid structures by index
x86/resctrl: Allow RMID allocation to be scoped by CLOSID
x86/resctrl: Track the number of dirty RMID a CLOSID has
x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding
x86/resctrl: Allocate the cleanest CLOSID by searching
closid_num_dirty_rmid
x86/resctrl: Move CLOSID/RMID matching and setting to use helpers
x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow
x86/resctrl: Queue mon_event_read() instead of sending an IPI
x86/resctrl: Allow resctrl_arch_rmid_read() to sleep
x86/resctrl: Allow arch to allocate memory needed in
resctrl_arch_rmid_read()
x86/resctrl: Make resctrl_mounted checks explicit
x86/resctrl: Move alloc/mon static keys into helpers
x86/resctrl: Make rdt_enable_key the arch's decision to switch
x86/resctrl: Add helpers for system wide mon/alloc capable
x86/resctrl: Add CPU online callback for resctrl work
x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but
cpu
x86/resctrl: Add CPU offline callback for resctrl work
x86/resctrl: Move domain helper migration into resctrl_offline_cpu()
x86/resctrl: Separate arch and fs resctrl locks
arch/x86/include/asm/resctrl.h | 90 +++++
arch/x86/kernel/cpu/resctrl/core.c | 102 ++---
arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 48 ++-
arch/x86/kernel/cpu/resctrl/internal.h | 67 +++-
arch/x86/kernel/cpu/resctrl/monitor.c | 449 +++++++++++++++++-----
arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 15 +-
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 359 ++++++++++++-----
include/linux/resctrl.h | 48 ++-
include/linux/tick.h | 9 +-
9 files changed, 911 insertions(+), 276 deletions(-)
--
2.20.1
tick_nohz_full_mask lists the CPUs that are nohz_full. This is only
needed when CONFIG_NO_HZ_FULL is defined. tick_nohz_full_cpu() allows
a specific CPU to be tested against the mask, and evaluates to false
when CONFIG_NO_HZ_FULL is not defined.
The resctrl code needs to pick a CPU to run some work on, a new helper
prefers housekeeping CPUs by examining the tick_nohz_full_mask. Hiding
the declaration behind #ifdef CONFIG_NO_HZ_FULL forces all the users to
be behind an ifdef too.
Move the tick_nohz_full_mask declaration, this lets callers drop the
ifdef, and guard access to tick_nohz_full_mask with IS_ENABLED() or
something like tick_nohz_full_cpu().
The definition does not need to be moved as any callers should be
removed at compile time unless CONFIG_NO_HZ_FULL is defined.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Acked-by: Reinette Chatre <[email protected]> # for resctrl dependency
CC: Frederic Weisbecker <[email protected]>
---
include/linux/tick.h | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/include/linux/tick.h b/include/linux/tick.h
index 716d17f31c45..0fb903838dfb 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -164,9 +164,16 @@ static inline u64 get_cpu_idle_time_us(int cpu, u64 *unused) { return -1; }
static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
#endif /* !CONFIG_NO_HZ_COMMON */
+/*
+ * Mask of CPUs that are nohz_full.
+ *
+ * Users should be guarded by CONFIG_NO_HZ_FULL or a tick_nohz_full_cpu()
+ * check.
+ */
+extern cpumask_var_t tick_nohz_full_mask;
+
#ifdef CONFIG_NO_HZ_FULL
extern bool tick_nohz_full_running;
-extern cpumask_var_t tick_nohz_full_mask;
static inline bool tick_nohz_full_enabled(void)
{
--
2.20.1
rmid_ptrs[] is allocated from dom_data_init() but never free()d.
While the exit text ends up in the linker script's DISCARD section,
the direction of travel is for resctrl to be/have loadable modules.
Add resctrl_put_mon_l3_config() to cleanup any memory allocated
by rdt_get_mon_l3_config().
There is no reason to backport this to a stable kernel.
Signed-off-by: James Morse <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v5:
* This patch is new
Changes since v6:
* Removed struct rdt_resource argument, added __exit markers to match the
only caller.
* Adedd a whole stack of functions to maintain symmetry.
Changes since v7:
* Moved the eventual kfree() call to be after rdtgroup_exit()
---
arch/x86/kernel/cpu/resctrl/core.c | 6 ++++++
arch/x86/kernel/cpu/resctrl/internal.h | 1 +
arch/x86/kernel/cpu/resctrl/monitor.c | 15 +++++++++++++++
3 files changed, 22 insertions(+)
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 19e0681f0435..b5d4b76f97c5 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -992,8 +992,14 @@ late_initcall(resctrl_late_init);
static void __exit resctrl_exit(void)
{
+ struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
+
cpuhp_remove_state(rdt_online);
+
rdtgroup_exit();
+
+ if (r->mon_capable)
+ rdt_put_mon_l3_config(r);
}
__exitcall(resctrl_exit);
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index a4f1aa15f0a2..f68c6aecfa66 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -546,6 +546,7 @@ void closid_free(int closid);
int alloc_rmid(void);
void free_rmid(u32 rmid);
int rdt_get_mon_l3_config(struct rdt_resource *r);
+void __exit rdt_put_mon_l3_config(struct rdt_resource *r);
bool __init rdt_cpu_has(int flag);
void mon_event_count(void *info);
int rdtgroup_mondata_show(struct seq_file *m, void *arg);
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index f136ac046851..5d9864919f1c 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -741,6 +741,16 @@ static int dom_data_init(struct rdt_resource *r)
return 0;
}
+static void __exit dom_data_exit(struct rdt_resource *r)
+{
+ mutex_lock(&rdtgroup_mutex);
+
+ kfree(rmid_ptrs);
+ rmid_ptrs = NULL;
+
+ mutex_unlock(&rdtgroup_mutex);
+}
+
static struct mon_evt llc_occupancy_event = {
.name = "llc_occupancy",
.evtid = QOS_L3_OCCUP_EVENT_ID,
@@ -830,6 +840,11 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r)
return 0;
}
+void __exit rdt_put_mon_l3_config(struct rdt_resource *r)
+{
+ dom_data_exit(r);
+}
+
void __init intel_rdt_mbm_apply_quirk(void)
{
int cf_index;
--
2.20.1
When monitoring is supported, each monitor and control group is allocated
an RMID. For control groups, rdtgroup_mkdir_ctrl_mon() later goes on to
allocate the CLOSID.
MPAM's equivalent of RMID are not an independent number, so can't be
allocated until the CLOSID is known. An RMID allocation for one CLOSID
may fail, whereas another may succeed depending on how many monitor
groups a control group has.
The RMID allocation needs to move to be after the CLOSID has been
allocated.
Move the RMID allocation and mondata dir creation to a helper.
Signed-off-by: James Morse <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v4:
* Fixed typo in commit message, moved some words around.
---
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 42 +++++++++++++++++---------
1 file changed, 27 insertions(+), 15 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 69a1de92384a..1eb3a3075093 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -3293,6 +3293,30 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp)
return ret;
}
+static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
+{
+ int ret;
+
+ if (!rdt_mon_capable)
+ return 0;
+
+ ret = alloc_rmid();
+ if (ret < 0) {
+ rdt_last_cmd_puts("Out of RMIDs\n");
+ return ret;
+ }
+ rdtgrp->mon.rmid = ret;
+
+ ret = mkdir_mondata_all(rdtgrp->kn, rdtgrp, &rdtgrp->mon.mon_data_kn);
+ if (ret) {
+ rdt_last_cmd_puts("kernfs subdir error\n");
+ free_rmid(rdtgrp->mon.rmid);
+ return ret;
+ }
+
+ return 0;
+}
+
static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
const char *name, umode_t mode,
enum rdt_group_type rtype, struct rdtgroup **r)
@@ -3365,20 +3389,10 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
goto out_destroy;
}
- if (rdt_mon_capable) {
- ret = alloc_rmid();
- if (ret < 0) {
- rdt_last_cmd_puts("Out of RMIDs\n");
- goto out_destroy;
- }
- rdtgrp->mon.rmid = ret;
+ ret = mkdir_rdt_prepare_rmid_alloc(rdtgrp);
+ if (ret)
+ goto out_destroy;
- ret = mkdir_mondata_all(kn, rdtgrp, &rdtgrp->mon.mon_data_kn);
- if (ret) {
- rdt_last_cmd_puts("kernfs subdir error\n");
- goto out_idfree;
- }
- }
kernfs_activate(kn);
/*
@@ -3386,8 +3400,6 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
*/
return 0;
-out_idfree:
- free_rmid(rdtgrp->mon.rmid);
out_destroy:
kernfs_put(rdtgrp->kn);
kernfs_remove(rdtgrp->kn);
--
2.20.1
RMID are allocated for each monitor or control group directory, because
each of these needs its own RMID. For control groups,
rdtgroup_mkdir_ctrl_mon() later goes on to allocate the CLOSID.
MPAM's equivalent of RMID is not an independent number, so can't be
allocated until the CLOSID is known. An RMID allocation for one CLOSID
may fail, whereas another may succeed depending on how many monitor
groups a control group has.
The RMID allocation needs to move to be after the CLOSID has been
allocated.
Move the RMID allocation out of mkdir_rdt_prepare() to occur in its caller,
after the mkdir_rdt_prepare() call. This allows the RMID allocator to
know the CLOSID.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v2:
* Moved kernfs_activate() later to preserve atomicity of files being visible
Changes since v5:
* Renamed out_id_free as out_closid_free.
---
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 35 +++++++++++++++++++-------
1 file changed, 26 insertions(+), 9 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 1eb3a3075093..8fb0f56f64be 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -3317,6 +3317,12 @@ static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
return 0;
}
+static void mkdir_rdt_prepare_rmid_free(struct rdtgroup *rgrp)
+{
+ if (rdt_mon_capable)
+ free_rmid(rgrp->mon.rmid);
+}
+
static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
const char *name, umode_t mode,
enum rdt_group_type rtype, struct rdtgroup **r)
@@ -3389,12 +3395,6 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
goto out_destroy;
}
- ret = mkdir_rdt_prepare_rmid_alloc(rdtgrp);
- if (ret)
- goto out_destroy;
-
- kernfs_activate(kn);
-
/*
* The caller unlocks the parent_kn upon success.
*/
@@ -3413,7 +3413,6 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
static void mkdir_rdt_prepare_clean(struct rdtgroup *rgrp)
{
kernfs_remove(rgrp->kn);
- free_rmid(rgrp->mon.rmid);
rdtgroup_remove(rgrp);
}
@@ -3435,12 +3434,21 @@ static int rdtgroup_mkdir_mon(struct kernfs_node *parent_kn,
prgrp = rdtgrp->mon.parent;
rdtgrp->closid = prgrp->closid;
+ ret = mkdir_rdt_prepare_rmid_alloc(rdtgrp);
+ if (ret) {
+ mkdir_rdt_prepare_clean(rdtgrp);
+ goto out_unlock;
+ }
+
+ kernfs_activate(rdtgrp->kn);
+
/*
* Add the rdtgrp to the list of rdtgrps the parent
* ctrl_mon group has to track.
*/
list_add_tail(&rdtgrp->mon.crdtgrp_list, &prgrp->mon.crdtgrp_list);
+out_unlock:
rdtgroup_kn_unlock(parent_kn);
return ret;
}
@@ -3471,9 +3479,16 @@ static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn,
ret = 0;
rdtgrp->closid = closid;
+
+ ret = mkdir_rdt_prepare_rmid_alloc(rdtgrp);
+ if (ret)
+ goto out_closid_free;
+
+ kernfs_activate(rdtgrp->kn);
+
ret = rdtgroup_init_alloc(rdtgrp);
if (ret < 0)
- goto out_id_free;
+ goto out_rmid_free;
list_add(&rdtgrp->rdtgroup_list, &rdt_all_groups);
@@ -3493,7 +3508,9 @@ static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn,
out_del_list:
list_del(&rdtgrp->rdtgroup_list);
-out_id_free:
+out_rmid_free:
+ mkdir_rdt_prepare_rmid_free(rdtgrp);
+out_closid_free:
closid_free(closid);
out_common_fail:
mkdir_rdt_prepare_clean(rdtgrp);
--
2.20.1
x86's RMID are independent of the CLOSID. An RMID can be allocated,
used and freed without considering the CLOSID.
MPAM's equivalent feature is PMG, which is not an independent number,
it extends the CLOSID/PARTID space. For MPAM, only PMG-bits worth of
'RMID' can be allocated for a single CLOSID.
i.e. if there is 1 bit of PMG space, then each CLOSID can have two
monitor groups.
To allow resctrl to disambiguate RMID values for different CLOSID,
everything in resctrl that keeps an RMID value needs to know the CLOSID
too. This will always be ignored on x86.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Xin Hao <[email protected]>
---
Is there a better term for 'the unique identifier for a monitor group'.
Using RMID for that here may be confusing...
Changes since v1:
* Added comment in struct rmid_entry
Changes since v2:
* Moved X86_RESCTRL_BAD_CLOSID from a subsequent patch
Chances since v3:
* Renamed X86_RESCTRL_BAD_CLOSID to EMPTY
* Clarified a few comments and kernel-doc
Changes since v5:
* Use entry->closid from the iterator, instead of the parent control group.
* Move the reserved defines into this patch to reduce the churn.
* Added some kernel doc.
* Renamed some arch closid parameters as 'unused'.
Changes since v6:
* Changes to comments.
Changes since v7:
* Changes to comments.
---
arch/x86/include/asm/resctrl.h | 7 +++
arch/x86/kernel/cpu/resctrl/internal.h | 2 +-
arch/x86/kernel/cpu/resctrl/monitor.c | 73 +++++++++++++++--------
arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 4 +-
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 12 ++--
include/linux/resctrl.h | 16 ++++-
6 files changed, 77 insertions(+), 37 deletions(-)
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index 255a78d9d906..cc6e1bce7b1a 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -7,6 +7,13 @@
#include <linux/sched.h>
#include <linux/jump_label.h>
+/*
+ * This value can never be a valid CLOSID, and is used when mapping a
+ * (closid, rmid) pair to an index and back. On x86 only the RMID is
+ * needed. The index is a software defined value.
+ */
+#define X86_RESCTRL_EMPTY_CLOSID ((u32)~0)
+
/**
* struct resctrl_pqr_state - State cache for the PQR MSR
* @cur_rmid: The cached Resource Monitoring ID
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index f68c6aecfa66..c836e3294e12 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -544,7 +544,7 @@ struct rdt_domain *get_domain_from_cpu(int cpu, struct rdt_resource *r);
int closids_supported(void);
void closid_free(int closid);
int alloc_rmid(void);
-void free_rmid(u32 rmid);
+void free_rmid(u32 closid, u32 rmid);
int rdt_get_mon_l3_config(struct rdt_resource *r);
void __exit rdt_put_mon_l3_config(struct rdt_resource *r);
bool __init rdt_cpu_has(int flag);
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 5d9864919f1c..f5d5570a5b5a 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -24,7 +24,20 @@
#include "internal.h"
+/**
+ * struct rmid_entry - dirty tracking for all RMID.
+ * @closid: The CLOSID for this entry.
+ * @rmid: The RMID for this entry.
+ * @busy: The number of domains with cached data using this RMID.
+ * @list: Member of the rmid_free_lru list when busy == 0.
+ *
+ * Depending on the architecture the correct monitor is accessed using
+ * both @closid and @rmid, or @rmid only.
+ *
+ * Take the rdtgroup_mutex when accessing.
+ */
struct rmid_entry {
+ u32 closid;
u32 rmid;
int busy;
struct list_head list;
@@ -136,7 +149,7 @@ static inline u64 get_corrected_mbm_count(u32 rmid, unsigned long val)
return val;
}
-static inline struct rmid_entry *__rmid_entry(u32 rmid)
+static inline struct rmid_entry *__rmid_entry(u32 closid, u32 rmid)
{
struct rmid_entry *entry;
@@ -190,7 +203,8 @@ static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_domain *hw_dom,
}
void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
- u32 rmid, enum resctrl_event_id eventid)
+ u32 unused, u32 rmid,
+ enum resctrl_event_id eventid)
{
struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
struct arch_mbm_state *am;
@@ -230,7 +244,8 @@ static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
}
int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
- u32 rmid, enum resctrl_event_id eventid, u64 *val)
+ u32 unused, u32 rmid, enum resctrl_event_id eventid,
+ u64 *val)
{
struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
@@ -285,9 +300,9 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
if (nrmid >= r->num_rmid)
break;
- entry = __rmid_entry(nrmid);
+ entry = __rmid_entry(X86_RESCTRL_EMPTY_CLOSID, nrmid);// temporary
- if (resctrl_arch_rmid_read(r, d, entry->rmid,
+ if (resctrl_arch_rmid_read(r, d, entry->closid, entry->rmid,
QOS_L3_OCCUP_EVENT_ID, &val)) {
rmid_dirty = true;
} else {
@@ -342,7 +357,8 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
cpu = get_cpu();
list_for_each_entry(d, &r->domains, list) {
if (cpumask_test_cpu(cpu, &d->cpu_mask)) {
- err = resctrl_arch_rmid_read(r, d, entry->rmid,
+ err = resctrl_arch_rmid_read(r, d, entry->closid,
+ entry->rmid,
QOS_L3_OCCUP_EVENT_ID,
&val);
if (err || val <= resctrl_rmid_realloc_threshold)
@@ -366,7 +382,7 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
list_add_tail(&entry->list, &rmid_free_lru);
}
-void free_rmid(u32 rmid)
+void free_rmid(u32 closid, u32 rmid)
{
struct rmid_entry *entry;
@@ -375,7 +391,7 @@ void free_rmid(u32 rmid)
lockdep_assert_held(&rdtgroup_mutex);
- entry = __rmid_entry(rmid);
+ entry = __rmid_entry(closid, rmid);
if (is_llc_occupancy_enabled())
add_rmid_to_limbo(entry);
@@ -383,8 +399,8 @@ void free_rmid(u32 rmid)
list_add_tail(&entry->list, &rmid_free_lru);
}
-static struct mbm_state *get_mbm_state(struct rdt_domain *d, u32 rmid,
- enum resctrl_event_id evtid)
+static struct mbm_state *get_mbm_state(struct rdt_domain *d, u32 closid,
+ u32 rmid, enum resctrl_event_id evtid)
{
switch (evtid) {
case QOS_L3_MBM_TOTAL_EVENT_ID:
@@ -396,20 +412,21 @@ static struct mbm_state *get_mbm_state(struct rdt_domain *d, u32 rmid,
}
}
-static int __mon_event_count(u32 rmid, struct rmid_read *rr)
+static int __mon_event_count(u32 closid, u32 rmid, struct rmid_read *rr)
{
struct mbm_state *m;
u64 tval = 0;
if (rr->first) {
- resctrl_arch_reset_rmid(rr->r, rr->d, rmid, rr->evtid);
- m = get_mbm_state(rr->d, rmid, rr->evtid);
+ resctrl_arch_reset_rmid(rr->r, rr->d, closid, rmid, rr->evtid);
+ m = get_mbm_state(rr->d, closid, rmid, rr->evtid);
if (m)
memset(m, 0, sizeof(struct mbm_state));
return 0;
}
- rr->err = resctrl_arch_rmid_read(rr->r, rr->d, rmid, rr->evtid, &tval);
+ rr->err = resctrl_arch_rmid_read(rr->r, rr->d, closid, rmid, rr->evtid,
+ &tval);
if (rr->err)
return rr->err;
@@ -421,6 +438,7 @@ static int __mon_event_count(u32 rmid, struct rmid_read *rr)
/*
* mbm_bw_count() - Update bw count from values previously read by
* __mon_event_count().
+ * @closid: The closid used to identify the cached mbm_state.
* @rmid: The rmid used to identify the cached mbm_state.
* @rr: The struct rmid_read populated by __mon_event_count().
*
@@ -429,7 +447,7 @@ static int __mon_event_count(u32 rmid, struct rmid_read *rr)
* __mon_event_count() is compared with the chunks value from the previous
* invocation. This must be called once per second to maintain values in MBps.
*/
-static void mbm_bw_count(u32 rmid, struct rmid_read *rr)
+static void mbm_bw_count(u32 closid, u32 rmid, struct rmid_read *rr)
{
struct mbm_state *m = &rr->d->mbm_local[rmid];
u64 cur_bw, bytes, cur_bytes;
@@ -459,7 +477,7 @@ void mon_event_count(void *info)
rdtgrp = rr->rgrp;
- ret = __mon_event_count(rdtgrp->mon.rmid, rr);
+ ret = __mon_event_count(rdtgrp->closid, rdtgrp->mon.rmid, rr);
/*
* For Ctrl groups read data from child monitor groups and
@@ -470,7 +488,8 @@ void mon_event_count(void *info)
if (rdtgrp->type == RDTCTRL_GROUP) {
list_for_each_entry(entry, head, mon.crdtgrp_list) {
- if (__mon_event_count(entry->mon.rmid, rr) == 0)
+ if (__mon_event_count(entry->closid, entry->mon.rmid,
+ rr) == 0)
ret = 0;
}
}
@@ -600,7 +619,8 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
}
}
-static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid)
+static void mbm_update(struct rdt_resource *r, struct rdt_domain *d,
+ u32 closid, u32 rmid)
{
struct rmid_read rr;
@@ -615,12 +635,12 @@ static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid)
if (is_mbm_total_enabled()) {
rr.evtid = QOS_L3_MBM_TOTAL_EVENT_ID;
rr.val = 0;
- __mon_event_count(rmid, &rr);
+ __mon_event_count(closid, rmid, &rr);
}
if (is_mbm_local_enabled()) {
rr.evtid = QOS_L3_MBM_LOCAL_EVENT_ID;
rr.val = 0;
- __mon_event_count(rmid, &rr);
+ __mon_event_count(closid, rmid, &rr);
/*
* Call the MBA software controller only for the
@@ -628,7 +648,7 @@ static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid)
* the software controller explicitly.
*/
if (is_mba_sc(NULL))
- mbm_bw_count(rmid, &rr);
+ mbm_bw_count(closid, rmid, &rr);
}
}
@@ -685,11 +705,11 @@ void mbm_handle_overflow(struct work_struct *work)
d = container_of(work, struct rdt_domain, mbm_over.work);
list_for_each_entry(prgrp, &rdt_all_groups, rdtgroup_list) {
- mbm_update(r, d, prgrp->mon.rmid);
+ mbm_update(r, d, prgrp->closid, prgrp->mon.rmid);
head = &prgrp->mon.crdtgrp_list;
list_for_each_entry(crgrp, head, mon.crdtgrp_list)
- mbm_update(r, d, crgrp->mon.rmid);
+ mbm_update(r, d, crgrp->closid, crgrp->mon.rmid);
if (is_mba_sc(NULL))
update_mba_bw(prgrp, d);
@@ -732,10 +752,11 @@ static int dom_data_init(struct rdt_resource *r)
}
/*
- * RMID 0 is special and is always allocated. It's used for all
- * tasks that are not monitored.
+ * RESCTRL_RESERVED_CLOSID and RESCTRL_RESERVED_RMID are special and
+ * are always allocated. These are used for the rdtgroup_default
+ * control group, which will be setup later in rdtgroup_init().
*/
- entry = __rmid_entry(0);
+ entry = __rmid_entry(RESCTRL_RESERVED_CLOSID, RESCTRL_RESERVED_RMID);
list_del(&entry->list);
return 0;
diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
index 8f559eeae08e..65bee6f11015 100644
--- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
+++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
@@ -752,7 +752,7 @@ int rdtgroup_locksetup_enter(struct rdtgroup *rdtgrp)
* anymore when this group would be used for pseudo-locking. This
* is safe to call on platforms not capable of monitoring.
*/
- free_rmid(rdtgrp->mon.rmid);
+ free_rmid(rdtgrp->closid, rdtgrp->mon.rmid);
ret = 0;
goto out;
@@ -787,7 +787,7 @@ int rdtgroup_locksetup_exit(struct rdtgroup *rdtgrp)
ret = rdtgroup_locksetup_user_restore(rdtgrp);
if (ret) {
- free_rmid(rdtgrp->mon.rmid);
+ free_rmid(rdtgrp->closid, rdtgrp->mon.rmid);
return ret;
}
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 8fb0f56f64be..f64c13fe22d7 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2842,7 +2842,7 @@ static void free_all_child_rdtgrp(struct rdtgroup *rdtgrp)
head = &rdtgrp->mon.crdtgrp_list;
list_for_each_entry_safe(sentry, stmp, head, mon.crdtgrp_list) {
- free_rmid(sentry->mon.rmid);
+ free_rmid(sentry->closid, sentry->mon.rmid);
list_del(&sentry->mon.crdtgrp_list);
if (atomic_read(&sentry->waitcount) != 0)
@@ -2882,7 +2882,7 @@ static void rmdir_all_sub(void)
cpumask_or(&rdtgroup_default.cpu_mask,
&rdtgroup_default.cpu_mask, &rdtgrp->cpu_mask);
- free_rmid(rdtgrp->mon.rmid);
+ free_rmid(rdtgrp->closid, rdtgrp->mon.rmid);
kernfs_remove(rdtgrp->kn);
list_del(&rdtgrp->rdtgroup_list);
@@ -3310,7 +3310,7 @@ static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
ret = mkdir_mondata_all(rdtgrp->kn, rdtgrp, &rdtgrp->mon.mon_data_kn);
if (ret) {
rdt_last_cmd_puts("kernfs subdir error\n");
- free_rmid(rdtgrp->mon.rmid);
+ free_rmid(rdtgrp->closid, rdtgrp->mon.rmid);
return ret;
}
@@ -3320,7 +3320,7 @@ static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
static void mkdir_rdt_prepare_rmid_free(struct rdtgroup *rgrp)
{
if (rdt_mon_capable)
- free_rmid(rgrp->mon.rmid);
+ free_rmid(rgrp->closid, rgrp->mon.rmid);
}
static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
@@ -3579,7 +3579,7 @@ static int rdtgroup_rmdir_mon(struct rdtgroup *rdtgrp, cpumask_var_t tmpmask)
update_closid_rmid(tmpmask, NULL);
rdtgrp->flags = RDT_DELETED;
- free_rmid(rdtgrp->mon.rmid);
+ free_rmid(rdtgrp->closid, rdtgrp->mon.rmid);
/*
* Remove the rdtgrp from the parent ctrl_mon group's list
@@ -3625,8 +3625,8 @@ static int rdtgroup_rmdir_ctrl(struct rdtgroup *rdtgrp, cpumask_var_t tmpmask)
cpumask_or(tmpmask, tmpmask, &rdtgrp->cpu_mask);
update_closid_rmid(tmpmask, NULL);
+ free_rmid(rdtgrp->closid, rdtgrp->mon.rmid);
closid_free(rdtgrp->closid);
- free_rmid(rdtgrp->mon.rmid);
rdtgroup_ctrl_remove(rdtgrp);
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 66942d7fba7f..bd4ec22b5a96 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -6,6 +6,10 @@
#include <linux/list.h>
#include <linux/pid.h>
+/* CLOSID, RMID value used by the default control group */
+#define RESCTRL_RESERVED_CLOSID 0
+#define RESCTRL_RESERVED_RMID 0
+
#ifdef CONFIG_PROC_CPU_RESCTRL
int proc_resctrl_show(struct seq_file *m,
@@ -225,6 +229,9 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
* for this resource and domain.
* @r: resource that the counter should be read from.
* @d: domain that the counter should be read from.
+ * @closid: closid that matches the rmid. Depending on the architecture, the
+ * counter may match traffic of both @closid and @rmid, or @rmid
+ * only.
* @rmid: rmid of the counter to read.
* @eventid: eventid to read, e.g. L3 occupancy.
* @val: result of the counter read in bytes.
@@ -235,20 +242,25 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
* 0 on success, or -EIO, -EINVAL etc on error.
*/
int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
- u32 rmid, enum resctrl_event_id eventid, u64 *val);
+ u32 closid, u32 rmid, enum resctrl_event_id eventid,
+ u64 *val);
+
/**
* resctrl_arch_reset_rmid() - Reset any private state associated with rmid
* and eventid.
* @r: The domain's resource.
* @d: The rmid's domain.
+ * @closid: closid that matches the rmid. Depending on the architecture, the
+ * counter may match traffic of both @closid and @rmid, or @rmid only.
* @rmid: The rmid whose counter values should be reset.
* @eventid: The eventid whose counter values should be reset.
*
* This can be called from any CPU.
*/
void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
- u32 rmid, enum resctrl_event_id eventid);
+ u32 closid, u32 rmid,
+ enum resctrl_event_id eventid);
/**
* resctrl_arch_reset_rmid_all() - Reset all private state associated with
--
2.20.1
x86 systems identify traffic using the CLOSID and RMID. The CLOSID is
used to lookup the control policy, the RMID is used for monitoring. For
x86 these are independent numbers.
Arm's MPAM has equivalent features PARTID and PMG, where the PARTID is
used to lookup the control policy. The PMG in contrast is a small number
of bits that are used to subdivide PARTID when monitoring. The
cache-occupancy monitors require the PARTID to be specified when
monitoring.
This means MPAM's PMG field is not unique. There are multiple PMG-0, one
per allocated CLOSID/PARTID. If PMG is treated as equivalent to RMID, it
cannot be allocated as an independent number. Bitmaps like rmid_busy_llc
need to be sized by the number of unique entries for this resource.
Treat the combined CLOSID and RMID as an index, and provide architecture
helpers to pack and unpack an index. This makes the MPAM values unique.
The domain's rmid_busy_llc and rmid_ptrs[] are then sized by index, as
are domain mbm_local[] and mbm_total[].
x86 can ignore the CLOSID field when packing and unpacking an index, and
report as many indexes as RMID.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v1:
* Added X86_BAD_CLOSID macro to make it clear what this value means
* Added second WARN_ON() for closid checking, and made both _ONCE()
Changes since v2:
* Added RESCTRL_RESERVED_CLOSID
* Removed a newline
* Repharsed some comments
* Renamed a variable 'ignore'd
* Moved X86_RESCTRL_BAD_CLOSID to a previous patch
Changes since v3:
* Changed a variable name
* Fixed various typos
Changes since v4:
* Removed resource parameter from has_busy_rmid()
* Rewrote commit message
Changes since v5:
* Used RESCTRL_RESERVED_RMID in clear_closid_rmid().
* Added comment against free_rmid()s index comparison tricks.
Changes since v6:
* Added a newline between some #includes.
* Juggled some plurals in a comment.
Changes since v7:
* Added more uses of RESCTRL_RESERVED_foo
* Removed use of resource in cqm_handle_limbo() that gcc >12 spots as unused.
---
arch/x86/include/asm/resctrl.h | 17 +++++
arch/x86/kernel/cpu/resctrl/core.c | 13 ++--
arch/x86/kernel/cpu/resctrl/internal.h | 4 +-
arch/x86/kernel/cpu/resctrl/monitor.c | 98 +++++++++++++++++---------
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 13 ++--
5 files changed, 100 insertions(+), 45 deletions(-)
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index cc6e1bce7b1a..db4c84dde2d5 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -101,6 +101,23 @@ static inline void resctrl_sched_in(struct task_struct *tsk)
__resctrl_sched_in(tsk);
}
+static inline u32 resctrl_arch_system_num_rmid_idx(void)
+{
+ /* RMID are independent numbers for x86. num_rmid_idx == num_rmid */
+ return boot_cpu_data.x86_cache_max_rmid + 1;
+}
+
+static inline void resctrl_arch_rmid_idx_decode(u32 idx, u32 *closid, u32 *rmid)
+{
+ *rmid = idx;
+ *closid = X86_RESCTRL_EMPTY_CLOSID;
+}
+
+static inline u32 resctrl_arch_rmid_idx_encode(u32 ignored, u32 rmid)
+{
+ return rmid;
+}
+
void resctrl_cpu_detect(struct cpuinfo_x86 *c);
#else
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index b5d4b76f97c5..ba6daef6bd26 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -589,7 +589,7 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
mbm_setup_overflow_handler(d, 0);
}
if (is_llc_occupancy_enabled() && cpu == d->cqm_work_cpu &&
- has_busy_rmid(r, d)) {
+ has_busy_rmid(d)) {
cancel_delayed_work(&d->cqm_limbo);
cqm_setup_limbo_handler(d, 0);
}
@@ -600,11 +600,12 @@ static void clear_closid_rmid(int cpu)
{
struct resctrl_pqr_state *state = this_cpu_ptr(&pqr_state);
- state->default_closid = 0;
- state->default_rmid = 0;
- state->cur_closid = 0;
- state->cur_rmid = 0;
- wrmsr(MSR_IA32_PQR_ASSOC, 0, 0);
+ state->default_closid = RESCTRL_RESERVED_CLOSID;
+ state->default_rmid = RESCTRL_RESERVED_RMID;
+ state->cur_closid = RESCTRL_RESERVED_CLOSID;
+ state->cur_rmid = RESCTRL_RESERVED_RMID;
+ wrmsr(MSR_IA32_PQR_ASSOC, RESCTRL_RESERVED_RMID,
+ RESCTRL_RESERVED_CLOSID);
}
static int resctrl_online_cpu(unsigned int cpu)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index c836e3294e12..97ec24f91ac4 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -8,6 +8,8 @@
#include <linux/fs_context.h>
#include <linux/jump_label.h>
+#include <asm/resctrl.h>
+
#define L3_QOS_CDP_ENABLE 0x01ULL
#define L2_QOS_CDP_ENABLE 0x01ULL
@@ -560,7 +562,7 @@ void __init intel_rdt_mbm_apply_quirk(void);
bool is_mba_sc(struct rdt_resource *r);
void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms);
void cqm_handle_limbo(struct work_struct *work);
-bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d);
+bool has_busy_rmid(struct rdt_domain *d);
void __check_limbo(struct rdt_domain *d, bool force_free);
void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
void __init thread_throttle_mode_init(void);
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index f5d5570a5b5a..d623031def4c 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -149,12 +149,29 @@ static inline u64 get_corrected_mbm_count(u32 rmid, unsigned long val)
return val;
}
-static inline struct rmid_entry *__rmid_entry(u32 closid, u32 rmid)
+/*
+ * x86 and arm64 differ in their handling of monitoring.
+ * x86's RMID are independent numbers, there is only one source of traffic
+ * with an RMID value of '1'.
+ * arm64's PMG extends the PARTID/CLOSID space, there are multiple sources of
+ * traffic with a PMG value of '1', one for each CLOSID, meaning the RMID
+ * value is no longer unique.
+ * To account for this, resctrl uses an index. On x86 this is just the RMID,
+ * on arm64 it encodes the CLOSID and RMID. This gives a unique number.
+ *
+ * The domain's rmid_busy_llc and rmid_ptrs[] are sized by index. The arch code
+ * must accept an attempt to read every index.
+ */
+static inline struct rmid_entry *__rmid_entry(u32 idx)
{
struct rmid_entry *entry;
+ u32 closid, rmid;
+
+ entry = &rmid_ptrs[idx];
+ resctrl_arch_rmid_idx_decode(idx, &closid, &rmid);
- entry = &rmid_ptrs[rmid];
- WARN_ON(entry->rmid != rmid);
+ WARN_ON_ONCE(entry->closid != closid);
+ WARN_ON_ONCE(entry->rmid != rmid);
return entry;
}
@@ -284,8 +301,9 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
void __check_limbo(struct rdt_domain *d, bool force_free)
{
struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
+ u32 idx_limit = resctrl_arch_system_num_rmid_idx();
struct rmid_entry *entry;
- u32 crmid = 1, nrmid;
+ u32 idx, cur_idx = 1;
bool rmid_dirty;
u64 val = 0;
@@ -296,12 +314,11 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
* RMID and move it to the free list when the counter reaches 0.
*/
for (;;) {
- nrmid = find_next_bit(d->rmid_busy_llc, r->num_rmid, crmid);
- if (nrmid >= r->num_rmid)
+ idx = find_next_bit(d->rmid_busy_llc, idx_limit, cur_idx);
+ if (idx >= idx_limit)
break;
- entry = __rmid_entry(X86_RESCTRL_EMPTY_CLOSID, nrmid);// temporary
-
+ entry = __rmid_entry(idx);
if (resctrl_arch_rmid_read(r, d, entry->closid, entry->rmid,
QOS_L3_OCCUP_EVENT_ID, &val)) {
rmid_dirty = true;
@@ -310,19 +327,21 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
}
if (force_free || !rmid_dirty) {
- clear_bit(entry->rmid, d->rmid_busy_llc);
+ clear_bit(idx, d->rmid_busy_llc);
if (!--entry->busy) {
rmid_limbo_count--;
list_add_tail(&entry->list, &rmid_free_lru);
}
}
- crmid = nrmid + 1;
+ cur_idx = idx + 1;
}
}
-bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d)
+bool has_busy_rmid(struct rdt_domain *d)
{
- return find_first_bit(d->rmid_busy_llc, r->num_rmid) != r->num_rmid;
+ u32 idx_limit = resctrl_arch_system_num_rmid_idx();
+
+ return find_first_bit(d->rmid_busy_llc, idx_limit) != idx_limit;
}
/*
@@ -352,6 +371,9 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
struct rdt_domain *d;
int cpu, err;
u64 val = 0;
+ u32 idx;
+
+ idx = resctrl_arch_rmid_idx_encode(entry->closid, entry->rmid);
entry->busy = 0;
cpu = get_cpu();
@@ -369,9 +391,9 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
* For the first limbo RMID in the domain,
* setup up the limbo worker.
*/
- if (!has_busy_rmid(r, d))
+ if (!has_busy_rmid(d))
cqm_setup_limbo_handler(d, CQM_LIMBOCHECK_INTERVAL);
- set_bit(entry->rmid, d->rmid_busy_llc);
+ set_bit(idx, d->rmid_busy_llc);
entry->busy++;
}
put_cpu();
@@ -384,14 +406,21 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
void free_rmid(u32 closid, u32 rmid)
{
+ u32 idx = resctrl_arch_rmid_idx_encode(closid, rmid);
struct rmid_entry *entry;
- if (!rmid)
- return;
-
lockdep_assert_held(&rdtgroup_mutex);
- entry = __rmid_entry(closid, rmid);
+ /*
+ * Do not allow the default rmid to be free'd. Comparing by index
+ * allows architectures that ignore the closid parameter to avoid an
+ * unnecessary check.
+ */
+ if (idx == resctrl_arch_rmid_idx_encode(RESCTRL_RESERVED_CLOSID,
+ RESCTRL_RESERVED_RMID))
+ return;
+
+ entry = __rmid_entry(idx);
if (is_llc_occupancy_enabled())
add_rmid_to_limbo(entry);
@@ -402,11 +431,13 @@ void free_rmid(u32 closid, u32 rmid)
static struct mbm_state *get_mbm_state(struct rdt_domain *d, u32 closid,
u32 rmid, enum resctrl_event_id evtid)
{
+ u32 idx = resctrl_arch_rmid_idx_encode(closid, rmid);
+
switch (evtid) {
case QOS_L3_MBM_TOTAL_EVENT_ID:
- return &d->mbm_total[rmid];
+ return &d->mbm_total[idx];
case QOS_L3_MBM_LOCAL_EVENT_ID:
- return &d->mbm_local[rmid];
+ return &d->mbm_local[idx];
default:
return NULL;
}
@@ -449,7 +480,8 @@ static int __mon_event_count(u32 closid, u32 rmid, struct rmid_read *rr)
*/
static void mbm_bw_count(u32 closid, u32 rmid, struct rmid_read *rr)
{
- struct mbm_state *m = &rr->d->mbm_local[rmid];
+ u32 idx = resctrl_arch_rmid_idx_encode(closid, rmid);
+ struct mbm_state *m = &rr->d->mbm_local[idx];
u64 cur_bw, bytes, cur_bytes;
cur_bytes = rr->val;
@@ -539,7 +571,7 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
{
u32 closid, rmid, cur_msr_val, new_msr_val;
struct mbm_state *pmbm_data, *cmbm_data;
- u32 cur_bw, delta_bw, user_bw;
+ u32 cur_bw, delta_bw, user_bw, idx;
struct rdt_resource *r_mba;
struct rdt_domain *dom_mba;
struct list_head *head;
@@ -552,7 +584,8 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
closid = rgrp->closid;
rmid = rgrp->mon.rmid;
- pmbm_data = &dom_mbm->mbm_local[rmid];
+ idx = resctrl_arch_rmid_idx_encode(closid, rmid);
+ pmbm_data = &dom_mbm->mbm_local[idx];
dom_mba = get_domain_from_cpu(smp_processor_id(), r_mba);
if (!dom_mba) {
@@ -660,17 +693,15 @@ void cqm_handle_limbo(struct work_struct *work)
{
unsigned long delay = msecs_to_jiffies(CQM_LIMBOCHECK_INTERVAL);
int cpu = smp_processor_id();
- struct rdt_resource *r;
struct rdt_domain *d;
mutex_lock(&rdtgroup_mutex);
- r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
d = container_of(work, struct rdt_domain, cqm_limbo.work);
__check_limbo(d, false);
- if (has_busy_rmid(r, d))
+ if (has_busy_rmid(d))
schedule_delayed_work_on(cpu, &d->cqm_limbo, delay);
mutex_unlock(&rdtgroup_mutex);
@@ -735,19 +766,20 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
static int dom_data_init(struct rdt_resource *r)
{
+ u32 idx_limit = resctrl_arch_system_num_rmid_idx();
struct rmid_entry *entry = NULL;
- int i, nr_rmids;
+ u32 idx;
+ int i;
- nr_rmids = r->num_rmid;
- rmid_ptrs = kcalloc(nr_rmids, sizeof(struct rmid_entry), GFP_KERNEL);
+ rmid_ptrs = kcalloc(idx_limit, sizeof(struct rmid_entry), GFP_KERNEL);
if (!rmid_ptrs)
return -ENOMEM;
- for (i = 0; i < nr_rmids; i++) {
+ for (i = 0; i < idx_limit; i++) {
entry = &rmid_ptrs[i];
INIT_LIST_HEAD(&entry->list);
- entry->rmid = i;
+ resctrl_arch_rmid_idx_decode(i, &entry->closid, &entry->rmid);
list_add_tail(&entry->list, &rmid_free_lru);
}
@@ -756,7 +788,9 @@ static int dom_data_init(struct rdt_resource *r)
* are always allocated. These are used for the rdtgroup_default
* control group, which will be setup later in rdtgroup_init().
*/
- entry = __rmid_entry(RESCTRL_RESERVED_CLOSID, RESCTRL_RESERVED_RMID);
+ idx = resctrl_arch_rmid_idx_encode(RESCTRL_RESERVED_CLOSID,
+ RESCTRL_RESERVED_RMID);
+ entry = __rmid_entry(idx);
list_del(&entry->list);
return 0;
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index f64c13fe22d7..351b74670673 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -3858,8 +3858,8 @@ static void __init rdtgroup_setup_default(void)
{
mutex_lock(&rdtgroup_mutex);
- rdtgroup_default.closid = 0;
- rdtgroup_default.mon.rmid = 0;
+ rdtgroup_default.closid = RESCTRL_RESERVED_CLOSID;
+ rdtgroup_default.mon.rmid = RESCTRL_RESERVED_RMID;
rdtgroup_default.type = RDTCTRL_GROUP;
INIT_LIST_HEAD(&rdtgroup_default.mon.crdtgrp_list);
@@ -3894,7 +3894,7 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
if (is_mbm_enabled())
cancel_delayed_work(&d->mbm_over);
- if (is_llc_occupancy_enabled() && has_busy_rmid(r, d)) {
+ if (is_llc_occupancy_enabled() && has_busy_rmid(d)) {
/*
* When a package is going down, forcefully
* decrement rmid->ebusy. There is no way to know
@@ -3912,16 +3912,17 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)
{
+ u32 idx_limit = resctrl_arch_system_num_rmid_idx();
size_t tsize;
if (is_llc_occupancy_enabled()) {
- d->rmid_busy_llc = bitmap_zalloc(r->num_rmid, GFP_KERNEL);
+ d->rmid_busy_llc = bitmap_zalloc(idx_limit, GFP_KERNEL);
if (!d->rmid_busy_llc)
return -ENOMEM;
}
if (is_mbm_total_enabled()) {
tsize = sizeof(*d->mbm_total);
- d->mbm_total = kcalloc(r->num_rmid, tsize, GFP_KERNEL);
+ d->mbm_total = kcalloc(idx_limit, tsize, GFP_KERNEL);
if (!d->mbm_total) {
bitmap_free(d->rmid_busy_llc);
return -ENOMEM;
@@ -3929,7 +3930,7 @@ static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)
}
if (is_mbm_local_enabled()) {
tsize = sizeof(*d->mbm_local);
- d->mbm_local = kcalloc(r->num_rmid, tsize, GFP_KERNEL);
+ d->mbm_local = kcalloc(idx_limit, tsize, GFP_KERNEL);
if (!d->mbm_local) {
bitmap_free(d->rmid_busy_llc);
kfree(d->mbm_total);
--
2.20.1
MPAMs RMID values are not unique unless the CLOSID is considered as well.
alloc_rmid() expects the RMID to be an independent number.
Pass the CLOSID in to alloc_rmid(). Use this to compare indexes when
allocating. If the CLOSID is not relevant to the index, this ends up
comparing the free RMID with itself, and the first free entry will be
used. With MPAM the CLOSID is included in the index, so this becomes a
walk of the free RMID entries, until one that matches the supplied
CLOSID is found.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v2;
* Rephrased comment in resctrl_find_free_rmid() to describe this in terms of
list_entry_first()
* Rephrased comment above alloc_rmid()
Changes since v3:
* Flipped conditions in alloc_rmid()
Changes since v4:
* Typo in comment
Changes since v5:
* Reworded two comments.
Changes since v6:
* Fixed a typo and some whitespace.
---
arch/x86/kernel/cpu/resctrl/internal.h | 2 +-
arch/x86/kernel/cpu/resctrl/monitor.c | 43 ++++++++++++++++++-----
arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 2 +-
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 2 +-
4 files changed, 37 insertions(+), 12 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 97ec24f91ac4..2f1d4f141dab 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -545,7 +545,7 @@ void rdtgroup_pseudo_lock_remove(struct rdtgroup *rdtgrp);
struct rdt_domain *get_domain_from_cpu(int cpu, struct rdt_resource *r);
int closids_supported(void);
void closid_free(int closid);
-int alloc_rmid(void);
+int alloc_rmid(u32 closid);
void free_rmid(u32 closid, u32 rmid);
int rdt_get_mon_l3_config(struct rdt_resource *r);
void __exit rdt_put_mon_l3_config(struct rdt_resource *r);
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index d623031def4c..1f371b108a74 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -344,24 +344,49 @@ bool has_busy_rmid(struct rdt_domain *d)
return find_first_bit(d->rmid_busy_llc, idx_limit) != idx_limit;
}
+static struct rmid_entry *resctrl_find_free_rmid(u32 closid)
+{
+ struct rmid_entry *itr;
+ u32 itr_idx, cmp_idx;
+
+ if (list_empty(&rmid_free_lru))
+ return rmid_limbo_count ? ERR_PTR(-EBUSY) : ERR_PTR(-ENOSPC);
+
+ list_for_each_entry(itr, &rmid_free_lru, list) {
+ /*
+ * Get the index of this free RMID, and the index it would need
+ * to be if it were used with this CLOSID.
+ * If the CLOSID is irrelevant on this architecture, the two
+ * index values are always the same on every entry and thus the
+ * very first entry will be returned.
+ */
+ itr_idx = resctrl_arch_rmid_idx_encode(itr->closid, itr->rmid);
+ cmp_idx = resctrl_arch_rmid_idx_encode(closid, itr->rmid);
+
+ if (itr_idx == cmp_idx)
+ return itr;
+ }
+
+ return ERR_PTR(-ENOSPC);
+}
+
/*
- * As of now the RMIDs allocation is global.
- * However we keep track of which packages the RMIDs
- * are used to optimize the limbo list management.
+ * For MPAM the RMID value is not unique, and has to be considered with
+ * the CLOSID. The (CLOSID, RMID) pair is allocated on all domains, which
+ * allows all domains to be managed by a single free list.
+ * Each domain also has a rmid_busy_llc to reduce the work of the limbo handler.
*/
-int alloc_rmid(void)
+int alloc_rmid(u32 closid)
{
struct rmid_entry *entry;
lockdep_assert_held(&rdtgroup_mutex);
- if (list_empty(&rmid_free_lru))
- return rmid_limbo_count ? -EBUSY : -ENOSPC;
+ entry = resctrl_find_free_rmid(closid);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
- entry = list_first_entry(&rmid_free_lru,
- struct rmid_entry, list);
list_del(&entry->list);
-
return entry->rmid;
}
diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
index 65bee6f11015..d8f44113ed1f 100644
--- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
+++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
@@ -777,7 +777,7 @@ int rdtgroup_locksetup_exit(struct rdtgroup *rdtgrp)
int ret;
if (rdt_mon_capable) {
- ret = alloc_rmid();
+ ret = alloc_rmid(rdtgrp->closid);
if (ret < 0) {
rdt_last_cmd_puts("Out of RMIDs\n");
return ret;
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 351b74670673..12a557c96100 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -3300,7 +3300,7 @@ static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
if (!rdt_mon_capable)
return 0;
- ret = alloc_rmid();
+ ret = alloc_rmid(rdtgrp->closid);
if (ret < 0) {
rdt_last_cmd_puts("Out of RMIDs\n");
return ret;
--
2.20.1
MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
used for different control groups.
This means once a CLOSID is allocated, all its monitoring ids may still be
dirty, and held in limbo.
Keep track of the number of RMID held in limbo each CLOSID has. This will
allow a future helper to find the 'cleanest' CLOSID when allocating.
The array is only needed when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is
defined. This will never be the case on x86.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
---
Changes since v4:
* Moved closid_num_dirty_rmid[] update under entry->busy check
* Take the mutex in dom_data_init() as the caller doesn't.
Changes since v5:
* Added braces after an else.
* Made closid_num_dirty_rmid an unsigned int.
* Moved mutex_lock() in dom_data_init() to cover the whole function.
Changes since v6:
* Made closid_num_dirty_rmid[] and associated tmp variables u32.
Changes since v7:
* Clobber kfree()d variable with NULL.
* Guard the use of closid_num_dirty_rmid with IS_ENABLED() so it can be
optimised out on x86.
---
arch/x86/kernel/cpu/resctrl/monitor.c | 69 +++++++++++++++++++++++----
1 file changed, 59 insertions(+), 10 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 1f371b108a74..6dfc68c800c8 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -50,6 +50,13 @@ struct rmid_entry {
*/
static LIST_HEAD(rmid_free_lru);
+/**
+ * @closid_num_dirty_rmid The number of dirty RMID each CLOSID has.
+ * Only allocated when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is defined.
+ * Indexed by CLOSID. Protected by rdtgroup_mutex.
+ */
+static u32 *closid_num_dirty_rmid;
+
/*
* @rmid_limbo_count - count of currently unused but (potentially)
* dirty RMIDs.
@@ -292,6 +299,17 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
return 0;
}
+static void limbo_release_entry(struct rmid_entry *entry)
+{
+ lockdep_assert_held(&rdtgroup_mutex);
+
+ rmid_limbo_count--;
+ list_add_tail(&entry->list, &rmid_free_lru);
+
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
+ closid_num_dirty_rmid[entry->closid]--;
+}
+
/*
* Check the RMIDs that are marked as busy for this domain. If the
* reported LLC occupancy is below the threshold clear the busy bit and
@@ -328,10 +346,8 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
if (force_free || !rmid_dirty) {
clear_bit(idx, d->rmid_busy_llc);
- if (!--entry->busy) {
- rmid_limbo_count--;
- list_add_tail(&entry->list, &rmid_free_lru);
- }
+ if (!--entry->busy)
+ limbo_release_entry(entry);
}
cur_idx = idx + 1;
}
@@ -398,6 +414,8 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
u64 val = 0;
u32 idx;
+ lockdep_assert_held(&rdtgroup_mutex);
+
idx = resctrl_arch_rmid_idx_encode(entry->closid, entry->rmid);
entry->busy = 0;
@@ -423,10 +441,13 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
}
put_cpu();
- if (entry->busy)
+ if (entry->busy) {
rmid_limbo_count++;
- else
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
+ closid_num_dirty_rmid[entry->closid]++;
+ } else {
list_add_tail(&entry->list, &rmid_free_lru);
+ }
}
void free_rmid(u32 closid, u32 rmid)
@@ -792,13 +813,33 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
static int dom_data_init(struct rdt_resource *r)
{
u32 idx_limit = resctrl_arch_system_num_rmid_idx();
+ u32 num_closid = resctrl_arch_get_num_closid(r);
struct rmid_entry *entry = NULL;
+ int err = 0, i;
u32 idx;
- int i;
+
+ mutex_lock(&rdtgroup_mutex);
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
+ u32 *tmp;
+
+ tmp = kcalloc(num_closid, sizeof(*tmp), GFP_KERNEL);
+ if (!tmp) {
+ err = -ENOMEM;
+ goto out_unlock;
+ }
+
+ closid_num_dirty_rmid = tmp;
+ }
rmid_ptrs = kcalloc(idx_limit, sizeof(struct rmid_entry), GFP_KERNEL);
- if (!rmid_ptrs)
- return -ENOMEM;
+ if (!rmid_ptrs) {
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
+ kfree(closid_num_dirty_rmid);
+ closid_num_dirty_rmid = NULL;
+ }
+ err = -ENOMEM;
+ goto out_unlock;
+ }
for (i = 0; i < idx_limit; i++) {
entry = &rmid_ptrs[i];
@@ -818,13 +859,21 @@ static int dom_data_init(struct rdt_resource *r)
entry = __rmid_entry(idx);
list_del(&entry->list);
- return 0;
+out_unlock:
+ mutex_unlock(&rdtgroup_mutex);
+
+ return err;
}
static void __exit dom_data_exit(struct rdt_resource *r)
{
mutex_lock(&rdtgroup_mutex);
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
+ kfree(closid_num_dirty_rmid);
+ closid_num_dirty_rmid = NULL;
+ }
+
kfree(rmid_ptrs);
rmid_ptrs = NULL;
--
2.20.1
MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
used for different control groups.
This means once a CLOSID is allocated, all its monitoring ids may still be
dirty, and held in limbo.
Instead of allocating the first free CLOSID, on architectures where
CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is enabled, search
closid_num_dirty_rmid[] to find the cleanest CLOSID.
The CLOSID found is returned to closid_alloc() for the free list
to be updated.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v4:
* Dropped stale section from comment
Changes since v5:
* Renamed some variables.
Changes since v7:
* Made comments over closid_num_dirty_rmid() not a kdoc comment.
---
arch/x86/kernel/cpu/resctrl/internal.h | 2 ++
arch/x86/kernel/cpu/resctrl/monitor.c | 47 +++++++++++++++++++++++++-
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 19 ++++++++---
3 files changed, 62 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 2f1d4f141dab..521afa016b05 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -568,5 +568,7 @@ void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
void __init thread_throttle_mode_init(void);
void __init mbm_config_rftype_init(const char *config);
void rdt_staged_configs_clear(void);
+bool closid_allocated(unsigned int closid);
+int resctrl_find_cleanest_closid(void);
#endif /* _ASM_X86_RESCTRL_INTERNAL_H */
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 6dfc68c800c8..fdbef88ff39b 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -50,7 +50,7 @@ struct rmid_entry {
*/
static LIST_HEAD(rmid_free_lru);
-/**
+/*
* @closid_num_dirty_rmid The number of dirty RMID each CLOSID has.
* Only allocated when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is defined.
* Indexed by CLOSID. Protected by rdtgroup_mutex.
@@ -386,6 +386,51 @@ static struct rmid_entry *resctrl_find_free_rmid(u32 closid)
return ERR_PTR(-ENOSPC);
}
+/**
+ * resctrl_find_cleanest_closid() - Find a CLOSID where all the associated
+ * RMID are clean, or the CLOSID that has
+ * the most clean RMID.
+ *
+ * MPAM's equivalent of RMID are per-CLOSID, meaning a freshly allocated CLOSID
+ * may not be able to allocate clean RMID. To avoid this the allocator will
+ * choose the CLOSID with the most clean RMID.
+ *
+ * When the CLOSID and RMID are independent numbers, the first free CLOSID will
+ * be returned.
+ */
+int resctrl_find_cleanest_closid(void)
+{
+ u32 cleanest_closid = ~0;
+ int i = 0;
+
+ lockdep_assert_held(&rdtgroup_mutex);
+
+ if (!IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
+ return -EIO;
+
+ for (i = 0; i < closids_supported(); i++) {
+ int num_dirty;
+
+ if (closid_allocated(i))
+ continue;
+
+ num_dirty = closid_num_dirty_rmid[i];
+ if (num_dirty == 0)
+ return i;
+
+ if (cleanest_closid == ~0)
+ cleanest_closid = i;
+
+ if (num_dirty < closid_num_dirty_rmid[cleanest_closid])
+ cleanest_closid = i;
+ }
+
+ if (cleanest_closid == ~0)
+ return -ENOSPC;
+
+ return cleanest_closid;
+}
+
/*
* For MPAM the RMID value is not unique, and has to be considered with
* the CLOSID. The (CLOSID, RMID) pair is allocated on all domains, which
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index f6b52415ca3d..00f830f729b3 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -137,13 +137,22 @@ static void closid_init(void)
static int closid_alloc(void)
{
- u32 closid = ffs(closid_free_map);
+ int cleanest_closid;
+ u32 closid;
lockdep_assert_held(&rdtgroup_mutex);
- if (closid == 0)
- return -ENOSPC;
- closid--;
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
+ cleanest_closid = resctrl_find_cleanest_closid();
+ if (cleanest_closid < 0)
+ return cleanest_closid;
+ closid = cleanest_closid;
+ } else {
+ closid = ffs(closid_free_map);
+ if (closid == 0)
+ return -ENOSPC;
+ closid--;
+ }
__clear_bit(closid, &closid_free_map);
return closid;
@@ -163,7 +172,7 @@ void closid_free(int closid)
* Return: true if @closid is currently associated with a resource group,
* false if @closid is free
*/
-static bool closid_allocated(unsigned int closid)
+bool closid_allocated(unsigned int closid)
{
lockdep_assert_held(&rdtgroup_mutex);
--
2.20.1
When switching tasks, the CLOSID and RMID that the new task should
use are stored in struct task_struct. For x86 the CLOSID known by resctrl,
the value in task_struct, and the value written to the CPU register are
all the same thing.
MPAM's CPU interface has two different PARTID's one for data accesses
the other for instruction fetch. Storing resctrl's CLOSID value in
struct task_struct implies the arch code knows whether resctrl is using
CDP.
Move the matching and setting of the struct task_struct properties
to use helpers. This allows arm64 to store the hardware format of
the register, instead of having to convert it each time.
__rdtgroup_move_task()s use of READ_ONCE()/WRITE_ONCE() ensures torn
values aren't seen as another CPU may schedule the task being moved
while the value is being changed. MPAM has an additional corner-case
here as the PMG bits extend the PARTID space. If the scheduler sees a
new-CLOSID but old-RMID, the task will dirty an RMID that the limbo code
is not watching causing an inaccurate count. x86's RMID are independent
values, so the limbo code will still be watching the old-RMID in this
circumstance.
To avoid this, arm64 needs both the CLOSID/RMID WRITE_ONCE()d together.
Both values must be provided together.
Because MPAM's RMID values are not unique, the CLOSID must be provided
when matching the RMID.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v2:
* __rdtgroup_move_task() changed to set CLOSID from different CLOSID place
depending on group type
---
arch/x86/include/asm/resctrl.h | 18 ++++++++
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 62 ++++++++++++++++----------
2 files changed, 56 insertions(+), 24 deletions(-)
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index db4c84dde2d5..1d274dbabc44 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -95,6 +95,24 @@ static inline unsigned int resctrl_arch_round_mon_val(unsigned int val)
return val * scale;
}
+static inline void resctrl_arch_set_closid_rmid(struct task_struct *tsk,
+ u32 closid, u32 rmid)
+{
+ WRITE_ONCE(tsk->closid, closid);
+ WRITE_ONCE(tsk->rmid, rmid);
+}
+
+static inline bool resctrl_arch_match_closid(struct task_struct *tsk, u32 closid)
+{
+ return READ_ONCE(tsk->closid) == closid;
+}
+
+static inline bool resctrl_arch_match_rmid(struct task_struct *tsk, u32 ignored,
+ u32 rmid)
+{
+ return READ_ONCE(tsk->rmid) == rmid;
+}
+
static inline void resctrl_sched_in(struct task_struct *tsk)
{
if (static_branch_likely(&rdt_enable_key))
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 00f830f729b3..460ac501f9e8 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -102,7 +102,7 @@ void rdt_staged_configs_clear(void)
*
* Using a global CLOSID across all resources has some advantages and
* some drawbacks:
- * + We can simply set "current->closid" to assign a task to a resource
+ * + We can simply set current's closid to assign a task to a resource
* group.
* + Context switch code can avoid extra memory references deciding which
* CLOSID to load into the PQR_ASSOC MSR
@@ -574,14 +574,26 @@ static void update_task_closid_rmid(struct task_struct *t)
_update_task_closid_rmid(t);
}
+static bool task_in_rdtgroup(struct task_struct *tsk, struct rdtgroup *rdtgrp)
+{
+ u32 closid, rmid = rdtgrp->mon.rmid;
+
+ if (rdtgrp->type == RDTCTRL_GROUP)
+ closid = rdtgrp->closid;
+ else if (rdtgrp->type == RDTMON_GROUP)
+ closid = rdtgrp->mon.parent->closid;
+ else
+ return false;
+
+ return resctrl_arch_match_closid(tsk, closid) &&
+ resctrl_arch_match_rmid(tsk, closid, rmid);
+}
+
static int __rdtgroup_move_task(struct task_struct *tsk,
struct rdtgroup *rdtgrp)
{
/* If the task is already in rdtgrp, no need to move the task. */
- if ((rdtgrp->type == RDTCTRL_GROUP && tsk->closid == rdtgrp->closid &&
- tsk->rmid == rdtgrp->mon.rmid) ||
- (rdtgrp->type == RDTMON_GROUP && tsk->rmid == rdtgrp->mon.rmid &&
- tsk->closid == rdtgrp->mon.parent->closid))
+ if (task_in_rdtgroup(tsk, rdtgrp))
return 0;
/*
@@ -592,19 +604,19 @@ static int __rdtgroup_move_task(struct task_struct *tsk,
* For monitor groups, can move the tasks only from
* their parent CTRL group.
*/
-
- if (rdtgrp->type == RDTCTRL_GROUP) {
- WRITE_ONCE(tsk->closid, rdtgrp->closid);
- WRITE_ONCE(tsk->rmid, rdtgrp->mon.rmid);
- } else if (rdtgrp->type == RDTMON_GROUP) {
- if (rdtgrp->mon.parent->closid == tsk->closid) {
- WRITE_ONCE(tsk->rmid, rdtgrp->mon.rmid);
- } else {
- rdt_last_cmd_puts("Can't move task to different control group\n");
- return -EINVAL;
- }
+ if (rdtgrp->type == RDTMON_GROUP &&
+ !resctrl_arch_match_closid(tsk, rdtgrp->mon.parent->closid)) {
+ rdt_last_cmd_puts("Can't move task to different control group\n");
+ return -EINVAL;
}
+ if (rdtgrp->type == RDTMON_GROUP)
+ resctrl_arch_set_closid_rmid(tsk, rdtgrp->mon.parent->closid,
+ rdtgrp->mon.rmid);
+ else
+ resctrl_arch_set_closid_rmid(tsk, rdtgrp->closid,
+ rdtgrp->mon.rmid);
+
/*
* Ensure the task's closid and rmid are written before determining if
* the task is current that will decide if it will be interrupted.
@@ -626,14 +638,15 @@ static int __rdtgroup_move_task(struct task_struct *tsk,
static bool is_closid_match(struct task_struct *t, struct rdtgroup *r)
{
- return (rdt_alloc_capable &&
- (r->type == RDTCTRL_GROUP) && (t->closid == r->closid));
+ return (rdt_alloc_capable && (r->type == RDTCTRL_GROUP) &&
+ resctrl_arch_match_closid(t, r->closid));
}
static bool is_rmid_match(struct task_struct *t, struct rdtgroup *r)
{
- return (rdt_mon_capable &&
- (r->type == RDTMON_GROUP) && (t->rmid == r->mon.rmid));
+ return (rdt_mon_capable && (r->type == RDTMON_GROUP) &&
+ resctrl_arch_match_rmid(t, r->mon.parent->closid,
+ r->mon.rmid));
}
/**
@@ -884,7 +897,7 @@ int proc_resctrl_show(struct seq_file *s, struct pid_namespace *ns,
rdtg->mode != RDT_MODE_EXCLUSIVE)
continue;
- if (rdtg->closid != tsk->closid)
+ if (!resctrl_arch_match_closid(tsk, rdtg->closid))
continue;
seq_printf(s, "res:%s%s\n", (rdtg == &rdtgroup_default) ? "/" : "",
@@ -892,7 +905,8 @@ int proc_resctrl_show(struct seq_file *s, struct pid_namespace *ns,
seq_puts(s, "mon:");
list_for_each_entry(crg, &rdtg->mon.crdtgrp_list,
mon.crdtgrp_list) {
- if (tsk->rmid != crg->mon.rmid)
+ if (!resctrl_arch_match_rmid(tsk, crg->mon.parent->closid,
+ crg->mon.rmid))
continue;
seq_printf(s, "%s", crg->kn->name);
break;
@@ -2825,8 +2839,8 @@ static void rdt_move_group_tasks(struct rdtgroup *from, struct rdtgroup *to,
for_each_process_thread(p, t) {
if (!from || is_closid_match(t, from) ||
is_rmid_match(t, from)) {
- WRITE_ONCE(t->closid, to->closid);
- WRITE_ONCE(t->rmid, to->mon.rmid);
+ resctrl_arch_set_closid_rmid(t, to->closid,
+ to->mon.rmid);
/*
* Order the closid/rmid stores above before the loads
--
2.20.1
The limbo and overflow code picks a CPU to use from the domain's list
of online CPUs. Work is then scheduled on these CPUs to maintain
the limbo list and any counters that may overflow.
cpumask_any() may pick a CPU that is marked nohz_full, which will
either penalise the work that CPU was dedicated to, or delay the
processing of limbo list or counters that may overflow. Perhaps
indefinitely. Delaying the overflow handling will skew the bandwidth
values calculated by mba_sc, which expects to be called once a second.
Add cpumask_any_housekeeping() as a replacement for cpumask_any()
that prefers housekeeping CPUs. This helper will still return
a nohz_full CPU if that is the only option. The CPU to use is
re-evaluated each time the limbo/overflow work runs. This ensures
the work will move off a nohz_full CPU once a housekeeping CPU is
available.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v3:
* typos fixed
Changes since v4:
* Made temporary variables unsigned
Changes since v5:
* Restructured cpumask_any_housekeeping() to avoid later churn.
Changes since v6:
* Update mbm_work_cpu/cqm_work_cpu when rescheduling.
---
arch/x86/kernel/cpu/resctrl/internal.h | 24 ++++++++++++++++++++++++
arch/x86/kernel/cpu/resctrl/monitor.c | 20 +++++++++++++-------
2 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 521afa016b05..33e24fcc8dd0 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -7,6 +7,7 @@
#include <linux/kernfs.h>
#include <linux/fs_context.h>
#include <linux/jump_label.h>
+#include <linux/tick.h>
#include <asm/resctrl.h>
@@ -56,6 +57,29 @@
/* Max event bits supported */
#define MAX_EVT_CONFIG_BITS GENMASK(6, 0)
+/**
+ * cpumask_any_housekeeping() - Choose any CPU in @mask, preferring those that
+ * aren't marked nohz_full
+ * @mask: The mask to pick a CPU from.
+ *
+ * Returns a CPU in @mask. If there are housekeeping CPUs that don't use
+ * nohz_full, these are preferred.
+ */
+static inline unsigned int cpumask_any_housekeeping(const struct cpumask *mask)
+{
+ unsigned int cpu, hk_cpu;
+
+ cpu = cpumask_any(mask);
+ if (!tick_nohz_full_cpu(cpu))
+ return cpu;
+
+ hk_cpu = cpumask_nth_andnot(0, mask, tick_nohz_full_mask);
+ if (hk_cpu < nr_cpu_ids)
+ cpu = hk_cpu;
+
+ return cpu;
+}
+
struct rdt_fs_context {
struct kernfs_fs_context kfc;
bool enable_cdpl2;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index fdbef88ff39b..8737a9d6caef 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -783,7 +783,6 @@ static void mbm_update(struct rdt_resource *r, struct rdt_domain *d,
void cqm_handle_limbo(struct work_struct *work)
{
unsigned long delay = msecs_to_jiffies(CQM_LIMBOCHECK_INTERVAL);
- int cpu = smp_processor_id();
struct rdt_domain *d;
mutex_lock(&rdtgroup_mutex);
@@ -792,8 +791,11 @@ void cqm_handle_limbo(struct work_struct *work)
__check_limbo(d, false);
- if (has_busy_rmid(d))
- schedule_delayed_work_on(cpu, &d->cqm_limbo, delay);
+ if (has_busy_rmid(d)) {
+ d->cqm_work_cpu = cpumask_any_housekeeping(&d->cpu_mask);
+ schedule_delayed_work_on(d->cqm_work_cpu, &d->cqm_limbo,
+ delay);
+ }
mutex_unlock(&rdtgroup_mutex);
}
@@ -803,7 +805,7 @@ void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms)
unsigned long delay = msecs_to_jiffies(delay_ms);
int cpu;
- cpu = cpumask_any(&dom->cpu_mask);
+ cpu = cpumask_any_housekeeping(&dom->cpu_mask);
dom->cqm_work_cpu = cpu;
schedule_delayed_work_on(cpu, &dom->cqm_limbo, delay);
@@ -813,7 +815,6 @@ void mbm_handle_overflow(struct work_struct *work)
{
unsigned long delay = msecs_to_jiffies(MBM_OVERFLOW_INTERVAL);
struct rdtgroup *prgrp, *crgrp;
- int cpu = smp_processor_id();
struct list_head *head;
struct rdt_resource *r;
struct rdt_domain *d;
@@ -837,7 +838,12 @@ void mbm_handle_overflow(struct work_struct *work)
update_mba_bw(prgrp, d);
}
- schedule_delayed_work_on(cpu, &d->mbm_over, delay);
+ /*
+ * Re-check for housekeeping CPUs. This allows the overflow handler to
+ * move off a nohz_full CPU quickly.
+ */
+ d->mbm_work_cpu = cpumask_any_housekeeping(&d->cpu_mask);
+ schedule_delayed_work_on(d->mbm_work_cpu, &d->mbm_over, delay);
out_unlock:
mutex_unlock(&rdtgroup_mutex);
@@ -850,7 +856,7 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
if (!static_branch_likely(&rdt_mon_enable_key))
return;
- cpu = cpumask_any(&dom->cpu_mask);
+ cpu = cpumask_any_housekeeping(&dom->cpu_mask);
dom->mbm_work_cpu = cpu;
schedule_delayed_work_on(cpu, &dom->mbm_over, delay);
}
--
2.20.1
Intel is blessed with an abundance of monitors, one per RMID, that can be
read from any CPU in the domain. MPAMs monitors reside in the MMIO MSC,
the number implemented is up to the manufacturer. This means when there are
fewer monitors than needed, they need to be allocated and freed.
MPAM's CSU monitors are used to back the 'llc_occupancy' monitor file. The
CSU counter is allowed to return 'not ready' for a small number of
micro-seconds after programming. To allow one CSU hardware monitor to be
used for multiple control or monitor groups, the CPU accessing the
monitor needs to be able to block when configuring and reading the
counter.
Worse, the domain may be broken up into slices, and the MMIO accesses
for each slice may need performing from different CPUs.
These two details mean MPAMs monitor code needs to be able to sleep, and
IPI another CPU in the domain to read from a resource that has been sliced.
mon_event_read() already invokes mon_event_count() via IPI, which means
this isn't possible. On systems using nohz-full, some CPUs need to be
interrupted to run kernel work as they otherwise stay in user-space
running realtime workloads. Interrupting these CPUs should be avoided,
and scheduling work on them may never complete.
Change mon_event_read() to pick a housekeeping CPU, (one that is not using
nohz_full) and schedule mon_event_count() and wait. If all the CPUs
in a domain are using nohz-full, then an IPI is used as the fallback.
This function is only used in response to a user-space filesystem request
(not the timing sensitive overflow code).
This allows MPAM to hide the slice behaviour from resctrl, and to keep
the monitor-allocation in monitor.c. When the IPI fallback is used on
machines where MPAM needs to make an access on multiple CPUs, the counter
read will always fail.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Peter Newman <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
---
Changes since v2:
* Use cpumask_any_housekeeping() and fallback to an IPI if needed.
Changes since v3:
* Actually include the IPI fallback code.
Changes since v4:
* Tinkered with existing capitalisation.
Changes since v5:
* Added a newline.
Changes since v6:
* Moved lockdep annotations to a later patch.
---
arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 26 +++++++++++++++++++++--
arch/x86/kernel/cpu/resctrl/monitor.c | 2 +-
2 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index beccb0e87ba7..d07f99245851 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -19,6 +19,8 @@
#include <linux/kernfs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/tick.h>
+
#include "internal.h"
/*
@@ -522,12 +524,21 @@ int rdtgroup_schemata_show(struct kernfs_open_file *of,
return ret;
}
+static int smp_mon_event_count(void *arg)
+{
+ mon_event_count(arg);
+
+ return 0;
+}
+
void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
struct rdt_domain *d, struct rdtgroup *rdtgrp,
int evtid, int first)
{
+ int cpu;
+
/*
- * setup the parameters to send to the IPI to read the data.
+ * Setup the parameters to pass to mon_event_count() to read the data.
*/
rr->rgrp = rdtgrp;
rr->evtid = evtid;
@@ -536,7 +547,18 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
rr->val = 0;
rr->first = first;
- smp_call_function_any(&d->cpu_mask, mon_event_count, rr, 1);
+ cpu = cpumask_any_housekeeping(&d->cpu_mask);
+
+ /*
+ * cpumask_any_housekeeping() prefers housekeeping CPUs, but
+ * are all the CPUs nohz_full? If yes, pick a CPU to IPI.
+ * MPAM's resctrl_arch_rmid_read() is unable to read the
+ * counters on some platforms if its called in irq context.
+ */
+ if (tick_nohz_full_cpu(cpu))
+ smp_call_function_any(&d->cpu_mask, mon_event_count, rr, 1);
+ else
+ smp_call_on_cpu(cpu, smp_mon_event_count, rr, false);
}
int rdtgroup_mondata_show(struct seq_file *m, void *arg)
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 8737a9d6caef..7e81268137b0 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -588,7 +588,7 @@ static void mbm_bw_count(u32 closid, u32 rmid, struct rmid_read *rr)
}
/*
- * This is called via IPI to read the CQM/MBM counters
+ * This is scheduled by mon_event_read() to read the CQM/MBM counters
* on a domain.
*/
void mon_event_count(void *info)
--
2.20.1
MPAM's cache occupancy counters can take a little while to settle once
the monitor has been configured. The maximum settling time is described
to the driver via a firmware table. The value could be large enough
that it makes sense to sleep. To avoid exposing this to resctrl, it
should be hidden behind MPAM's resctrl_arch_rmid_read().
resctrl_arch_rmid_read() may be called via IPI meaning it is unable
to sleep. In this case resctrl_arch_rmid_read() should return an error
if it needs to sleep. This will only affect MPAM platforms where
the cache occupancy counter isn't available immediately, nohz_full is
in use, and there are no housekeeping CPUs in the necessary domain.
There are three callers of resctrl_arch_rmid_read():
__mon_event_count() and __check_limbo() are both called from a
non-migrateable context. mon_event_read() invokes __mon_event_count()
using smp_call_on_cpu(), which adds work to the target CPUs workqueue.
rdtgroup_mutex() is held, meaning this cannot race with the resctrl
cpuhp callback. __check_limbo() is invoked via schedule_delayed_work_on()
also adds work to a per-cpu workqueue.
The remaining call is add_rmid_to_limbo() which is called in response
to a user-space syscall that frees an RMID. This opportunistically
reads the LLC occupancy counter on the current domain to see if the
RMID is over the dirty threshold. This has to disable preemption to
avoid reading the wrong domain's value. Disabling pre-emption here
prevents resctrl_arch_rmid_read() from sleeping.
add_rmid_to_limbo() walks each domain, but only reads the counter
on one domain. If the system has more than one domain, the RMID will
always be added to the limbo list. If the RMIDs usage was not over the
threshold, it will be removed from the list when __check_limbo() runs.
Make this the default behaviour. Free RMIDs are always added to the
limbo list for each domain.
The user visible effect of this is that a clean RMID is not available
for re-allocation immediately after 'rmdir()' completes, this behaviour
was never portable as it never happened on a machine with multiple
domains.
Removing this path allows resctrl_arch_rmid_read() to sleep if its called
with interrupts unmasked. Document this is the expected behaviour, and
add a might_sleep() annotation to catch changes that won't work on arm64.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
---
The previous version allowed resctrl_arch_rmid_read() to be called on the
wrong CPUs, but now that this needs to take nohz_full and housekeeping into
account, its too complex.
Changes since v3:
* Removed error handling for smp_call_function_any(), this can't race
with the cpuhp callbacks as both hold rdtgroup_mutex.
* Switched to the alternative of removing the counter read, this simplifies
things dramatically.
Changes since v4:
* Messed with capitalisation.
* Removed some dead code now that entry->busy will never be zero in
add_rmid_to_limbo().
* Rephrased the comment above resctrl_arch_rmid_read_context_check().
Changes since v5:
* Really rephrased the comment above resctrl_arch_rmid_read_context_check().
---
arch/x86/kernel/cpu/resctrl/monitor.c | 25 +++++--------------------
include/linux/resctrl.h | 23 ++++++++++++++++++++++-
2 files changed, 27 insertions(+), 21 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 7e81268137b0..2785a2a4ea33 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -277,6 +277,8 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
u64 msr_val, chunks;
int ret;
+ resctrl_arch_rmid_read_context_check();
+
if (!cpumask_test_cpu(smp_processor_id(), &d->cpu_mask))
return -EINVAL;
@@ -455,8 +457,6 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
{
struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
struct rdt_domain *d;
- int cpu, err;
- u64 val = 0;
u32 idx;
lockdep_assert_held(&rdtgroup_mutex);
@@ -464,17 +464,7 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
idx = resctrl_arch_rmid_idx_encode(entry->closid, entry->rmid);
entry->busy = 0;
- cpu = get_cpu();
list_for_each_entry(d, &r->domains, list) {
- if (cpumask_test_cpu(cpu, &d->cpu_mask)) {
- err = resctrl_arch_rmid_read(r, d, entry->closid,
- entry->rmid,
- QOS_L3_OCCUP_EVENT_ID,
- &val);
- if (err || val <= resctrl_rmid_realloc_threshold)
- continue;
- }
-
/*
* For the first limbo RMID in the domain,
* setup up the limbo worker.
@@ -484,15 +474,10 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
set_bit(idx, d->rmid_busy_llc);
entry->busy++;
}
- put_cpu();
- if (entry->busy) {
- rmid_limbo_count++;
- if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
- closid_num_dirty_rmid[entry->closid]++;
- } else {
- list_add_tail(&entry->list, &rmid_free_lru);
- }
+ rmid_limbo_count++;
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
+ closid_num_dirty_rmid[entry->closid]++;
}
void free_rmid(u32 closid, u32 rmid)
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index bd4ec22b5a96..8649fc84aac2 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -236,7 +236,12 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
* @eventid: eventid to read, e.g. L3 occupancy.
* @val: result of the counter read in bytes.
*
- * Call from process context on a CPU that belongs to domain @d.
+ * Some architectures need to sleep when first programming some of the counters.
+ * (specifically: arm64's MPAM cache occupancy counters can return 'not ready'
+ * for a short period of time). Call from a non-migrateable process context on
+ * a CPU that belongs to domain @d. e.g. use smp_call_on_cpu() or
+ * schedule_work_on(). This function can be called with interrupts masked,
+ * e.g. using smp_call_function_any(), but may consistently return an error.
*
* Return:
* 0 on success, or -EIO, -EINVAL etc on error.
@@ -245,6 +250,22 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
u32 closid, u32 rmid, enum resctrl_event_id eventid,
u64 *val);
+/**
+ * resctrl_arch_rmid_read_context_check() - warn about invalid contexts
+ *
+ * When built with CONFIG_DEBUG_ATOMIC_SLEEP generate a warning when
+ * resctrl_arch_rmid_read() is called with preemption disabled.
+ *
+ * The contract with resctrl_arch_rmid_read() is that if interrupts
+ * are unmasked, it can sleep. This allows NOHZ_FULL systems to use an
+ * IPI, (and fail if the call needed to sleep), while most of the time
+ * the work is scheduled, allowing the call to sleep.
+ */
+static inline void resctrl_arch_rmid_read_context_check(void)
+{
+ if (!irqs_disabled())
+ might_sleep();
+}
/**
* resctrl_arch_reset_rmid() - Reset any private state associated with rmid
--
2.20.1
The resctrl CLOSID allocator uses a single 32bit word to track which
CLOSID are free. The setting and clearing of bits is open coded.
Convert the existing open coded bit manipulations of closid_free_map
to use __set_bit() and friends. These don't need to be atomic as this
list is protected by the mutex.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v6:
* Use the __ inatomic helpers and add lockdep_assert_held() annotations to
document how this is safe.
* Fixed a resctrl_closid_is_free()/closid_allocated() rename in the commit
message.
* Use RESCTRL_RESERVED_CLOSID to improve readability.
Changes since v7:
* Removed paragraph explaining why this should be done now due to badword
'subsequent'.
* Changed a comment to refer to RESCTRL_RESERVED_CLOSID.
---
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 12a557c96100..f6b52415ca3d 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -111,7 +111,7 @@ void rdt_staged_configs_clear(void)
* - Our choices on how to configure each resource become progressively more
* limited as the number of resources grows.
*/
-static int closid_free_map;
+static unsigned long closid_free_map;
static int closid_free_map_len;
int closids_supported(void)
@@ -130,8 +130,8 @@ static void closid_init(void)
closid_free_map = BIT_MASK(rdt_min_closid) - 1;
- /* CLOSID 0 is always reserved for the default group */
- closid_free_map &= ~1;
+ /* RESCTRL_RESERVED_CLOSID is always reserved for the default group */
+ __clear_bit(RESCTRL_RESERVED_CLOSID, &closid_free_map);
closid_free_map_len = rdt_min_closid;
}
@@ -139,17 +139,21 @@ static int closid_alloc(void)
{
u32 closid = ffs(closid_free_map);
+ lockdep_assert_held(&rdtgroup_mutex);
+
if (closid == 0)
return -ENOSPC;
closid--;
- closid_free_map &= ~(1 << closid);
+ __clear_bit(closid, &closid_free_map);
return closid;
}
void closid_free(int closid)
{
- closid_free_map |= 1 << closid;
+ lockdep_assert_held(&rdtgroup_mutex);
+
+ __set_bit(closid, &closid_free_map);
}
/**
@@ -161,7 +165,9 @@ void closid_free(int closid)
*/
static bool closid_allocated(unsigned int closid)
{
- return (closid_free_map & (1 << closid)) == 0;
+ lockdep_assert_held(&rdtgroup_mutex);
+
+ return !test_bit(closid, &closid_free_map);
}
/**
--
2.20.1
Depending on the number of monitors available, Arm's MPAM may need to
allocate a monitor prior to reading the counter value. Allocating a
contended resource may involve sleeping.
__check_limbo() and mon_event_count() each make multiple calls to
resctrl_arch_rmid_read(), to avoid extra work on contended systems,
the allocation should be valid for multiple invocations of
resctrl_arch_rmid_read().
The memory or hardware allocated is not specific to a domain.
Add arch hooks for this allocation, which need calling before
resctrl_arch_rmid_read(). The allocated monitor is passed to
resctrl_arch_rmid_read(), then freed again afterwards. The helper
can be called on any CPU, and can sleep.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v3:
* Expanded comment.
* Removed stray header include.
* Reworded commit message.
* Made ctx a void * instead of an int.
Changes since v4:
* Used IS_ERR() in more places.
Changes since v5:
* Pass the error back from mon_event_read() as -EINVAL/Unavailable.
* Add some ratelimited warnings when failing to allocate a mon context
Changes since v6:
* Added a newline.
Changes since v7:
* Replaced explanation of why the memory allocation should be global as
the old explanation made no sense now that the patches have changed order.
---
arch/x86/include/asm/resctrl.h | 11 +++++++
arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 7 +++++
arch/x86/kernel/cpu/resctrl/internal.h | 1 +
arch/x86/kernel/cpu/resctrl/monitor.c | 35 +++++++++++++++++++++--
include/linux/resctrl.h | 5 +++-
5 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index 1d274dbabc44..29c4cc343787 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -136,6 +136,17 @@ static inline u32 resctrl_arch_rmid_idx_encode(u32 ignored, u32 rmid)
return rmid;
}
+/* x86 can always read an rmid, nothing needs allocating */
+struct rdt_resource;
+static inline void *resctrl_arch_mon_ctx_alloc(struct rdt_resource *r, int evtid)
+{
+ might_sleep();
+ return NULL;
+};
+
+static inline void resctrl_arch_mon_ctx_free(struct rdt_resource *r, int evtid,
+ void *ctx) { };
+
void resctrl_cpu_detect(struct cpuinfo_x86 *c);
#else
diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index d07f99245851..a033e8e32108 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -546,6 +546,11 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
rr->d = d;
rr->val = 0;
rr->first = first;
+ rr->arch_mon_ctx = resctrl_arch_mon_ctx_alloc(r, evtid);
+ if (IS_ERR(rr->arch_mon_ctx)) {
+ rr->err = -EINVAL;
+ return;
+ }
cpu = cpumask_any_housekeeping(&d->cpu_mask);
@@ -559,6 +564,8 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
smp_call_function_any(&d->cpu_mask, mon_event_count, rr, 1);
else
smp_call_on_cpu(cpu, smp_mon_event_count, rr, false);
+
+ resctrl_arch_mon_ctx_free(r, evtid, rr->arch_mon_ctx);
}
int rdtgroup_mondata_show(struct seq_file *m, void *arg)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 33e24fcc8dd0..bb07b9b01e36 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -138,6 +138,7 @@ struct rmid_read {
bool first;
int err;
u64 val;
+ void *arch_mon_ctx;
};
extern bool rdt_alloc_capable;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 2785a2a4ea33..20fe7ed494c2 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -269,7 +269,7 @@ static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
u32 unused, u32 rmid, enum resctrl_event_id eventid,
- u64 *val)
+ u64 *val, void *ignored)
{
struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
@@ -324,9 +324,17 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
u32 idx_limit = resctrl_arch_system_num_rmid_idx();
struct rmid_entry *entry;
u32 idx, cur_idx = 1;
+ void *arch_mon_ctx;
bool rmid_dirty;
u64 val = 0;
+ arch_mon_ctx = resctrl_arch_mon_ctx_alloc(r, QOS_L3_OCCUP_EVENT_ID);
+ if (IS_ERR(arch_mon_ctx)) {
+ pr_warn_ratelimited("Failed to allocate monitor context: %ld",
+ PTR_ERR(arch_mon_ctx));
+ return;
+ }
+
/*
* Skip RMID 0 and start from RMID 1 and check all the RMIDs that
* are marked as busy for occupancy < threshold. If the occupancy
@@ -340,7 +348,8 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
entry = __rmid_entry(idx);
if (resctrl_arch_rmid_read(r, d, entry->closid, entry->rmid,
- QOS_L3_OCCUP_EVENT_ID, &val)) {
+ QOS_L3_OCCUP_EVENT_ID, &val,
+ arch_mon_ctx)) {
rmid_dirty = true;
} else {
rmid_dirty = (val >= resctrl_rmid_realloc_threshold);
@@ -353,6 +362,8 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
}
cur_idx = idx + 1;
}
+
+ resctrl_arch_mon_ctx_free(r, QOS_L3_OCCUP_EVENT_ID, arch_mon_ctx);
}
bool has_busy_rmid(struct rdt_domain *d)
@@ -533,7 +544,7 @@ static int __mon_event_count(u32 closid, u32 rmid, struct rmid_read *rr)
}
rr->err = resctrl_arch_rmid_read(rr->r, rr->d, closid, rmid, rr->evtid,
- &tval);
+ &tval, rr->arch_mon_ctx);
if (rr->err)
return rr->err;
@@ -744,11 +755,27 @@ static void mbm_update(struct rdt_resource *r, struct rdt_domain *d,
if (is_mbm_total_enabled()) {
rr.evtid = QOS_L3_MBM_TOTAL_EVENT_ID;
rr.val = 0;
+ rr.arch_mon_ctx = resctrl_arch_mon_ctx_alloc(rr.r, rr.evtid);
+ if (IS_ERR(rr.arch_mon_ctx)) {
+ pr_warn_ratelimited("Failed to allocate monitor context: %ld",
+ PTR_ERR(rr.arch_mon_ctx));
+ return;
+ }
+
__mon_event_count(closid, rmid, &rr);
+
+ resctrl_arch_mon_ctx_free(rr.r, rr.evtid, rr.arch_mon_ctx);
}
if (is_mbm_local_enabled()) {
rr.evtid = QOS_L3_MBM_LOCAL_EVENT_ID;
rr.val = 0;
+ rr.arch_mon_ctx = resctrl_arch_mon_ctx_alloc(rr.r, rr.evtid);
+ if (IS_ERR(rr.arch_mon_ctx)) {
+ pr_warn_ratelimited("Failed to allocate monitor context: %ld",
+ PTR_ERR(rr.arch_mon_ctx));
+ return;
+ }
+
__mon_event_count(closid, rmid, &rr);
/*
@@ -758,6 +785,8 @@ static void mbm_update(struct rdt_resource *r, struct rdt_domain *d,
*/
if (is_mba_sc(NULL))
mbm_bw_count(closid, rmid, &rr);
+
+ resctrl_arch_mon_ctx_free(rr.r, rr.evtid, rr.arch_mon_ctx);
}
}
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 8649fc84aac2..bf460c912bf5 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -235,6 +235,9 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
* @rmid: rmid of the counter to read.
* @eventid: eventid to read, e.g. L3 occupancy.
* @val: result of the counter read in bytes.
+ * @arch_mon_ctx: An architecture specific value from
+ * resctrl_arch_mon_ctx_alloc(), for MPAM this identifies
+ * the hardware monitor allocated for this read request.
*
* Some architectures need to sleep when first programming some of the counters.
* (specifically: arm64's MPAM cache occupancy counters can return 'not ready'
@@ -248,7 +251,7 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
*/
int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
u32 closid, u32 rmid, enum resctrl_event_id eventid,
- u64 *val);
+ u64 *val, void *arch_mon_ctx);
/**
* resctrl_arch_rmid_read_context_check() - warn about invalid contexts
--
2.20.1
resctrl enables three static keys depending on the features it has enabled.
Another architecture's context switch code may look different, any
static keys that control it should be buried behind helpers.
Move the alloc/mon logic into arch-specific helpers as a preparatory step
for making the rdt_enable_key's status something the arch code decides.
This means other architectures don't have to mirror the static keys.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
arch/x86/include/asm/resctrl.h | 20 ++++++++++++++++++++
arch/x86/kernel/cpu/resctrl/internal.h | 5 -----
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 8 ++++----
3 files changed, 24 insertions(+), 9 deletions(-)
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index 29c4cc343787..3c9137b6ad4f 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -42,6 +42,26 @@ DECLARE_STATIC_KEY_FALSE(rdt_enable_key);
DECLARE_STATIC_KEY_FALSE(rdt_alloc_enable_key);
DECLARE_STATIC_KEY_FALSE(rdt_mon_enable_key);
+static inline void resctrl_arch_enable_alloc(void)
+{
+ static_branch_enable_cpuslocked(&rdt_alloc_enable_key);
+}
+
+static inline void resctrl_arch_disable_alloc(void)
+{
+ static_branch_disable_cpuslocked(&rdt_alloc_enable_key);
+}
+
+static inline void resctrl_arch_enable_mon(void)
+{
+ static_branch_enable_cpuslocked(&rdt_mon_enable_key);
+}
+
+static inline void resctrl_arch_disable_mon(void)
+{
+ static_branch_disable_cpuslocked(&rdt_mon_enable_key);
+}
+
/*
* __resctrl_sched_in() - Writes the task's CLOSid/RMID to IA32_PQR_MSR
*
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 5ce49503fcd8..68b9beed8e42 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -95,9 +95,6 @@ static inline struct rdt_fs_context *rdt_fc2context(struct fs_context *fc)
return container_of(kfc, struct rdt_fs_context, kfc);
}
-DECLARE_STATIC_KEY_FALSE(rdt_enable_key);
-DECLARE_STATIC_KEY_FALSE(rdt_mon_enable_key);
-
/**
* struct mon_evt - Entry in the event list of a resource
* @evtid: event id
@@ -454,8 +451,6 @@ extern struct mutex rdtgroup_mutex;
extern struct rdt_hw_resource rdt_resources_all[];
extern struct rdtgroup rdtgroup_default;
-DECLARE_STATIC_KEY_FALSE(rdt_alloc_enable_key);
-
extern struct dentry *debugfs_resctrl;
enum resctrl_res_level {
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 646d224c3ac9..8cc5a0937fa8 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2673,9 +2673,9 @@ static int rdt_get_tree(struct fs_context *fc)
goto out_psl;
if (rdt_alloc_capable)
- static_branch_enable_cpuslocked(&rdt_alloc_enable_key);
+ resctrl_arch_enable_alloc();
if (rdt_mon_capable)
- static_branch_enable_cpuslocked(&rdt_mon_enable_key);
+ resctrl_arch_enable_mon();
if (rdt_alloc_capable || rdt_mon_capable) {
static_branch_enable_cpuslocked(&rdt_enable_key);
@@ -2951,8 +2951,8 @@ static void rdt_kill_sb(struct super_block *sb)
rdtgroup_default.mode = RDT_MODE_SHAREABLE;
schemata_list_destroy();
rdtgroup_destroy_root();
- static_branch_disable_cpuslocked(&rdt_alloc_enable_key);
- static_branch_disable_cpuslocked(&rdt_mon_enable_key);
+ resctrl_arch_disable_alloc();
+ resctrl_arch_disable_mon();
static_branch_disable_cpuslocked(&rdt_enable_key);
resctrl_mounted = false;
kernfs_kill_sb(sb);
--
2.20.1
resctrl reads rdt_alloc_capable or rdt_mon_capable to determine
whether any of the resources support the corresponding features.
resctrl also uses the static-keys that affect the architecture's
context-switch code to determine the same thing.
This forces another architecture to have the same static-keys.
As the static-key is enabled based on the capable flag, and none of
the filesystem uses of these are in the scheduler path, move the
capable flags behind helpers, and use these in the filesystem
code instead of the static-key.
After this change, only the architecture code manages and uses
the static-keys to ensure __resctrl_sched_in() does not need
runtime checks.
This avoids multiple architectures having to define the same
static-keys.
Cases where the static-key implicitly tested if the resctrl
filesystem was mounted all have an explicit check added by a
previous patch.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
---
Changes since v1:
* Added missing conversion in mkdir_rdt_prepare_rmid_free()
Changes since v3:
* Expanded the commit message.
Change since v7:
* Added a few missing resctrl_arch_mon_capable() that crept in during
a rebase.
---
arch/x86/include/asm/resctrl.h | 13 ++++++++
arch/x86/kernel/cpu/resctrl/internal.h | 2 --
arch/x86/kernel/cpu/resctrl/monitor.c | 4 +--
arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 6 ++--
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 38 +++++++++++------------
5 files changed, 37 insertions(+), 26 deletions(-)
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index b74aa34dc9e8..12dbd2588ca7 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -38,10 +38,18 @@ struct resctrl_pqr_state {
DECLARE_PER_CPU(struct resctrl_pqr_state, pqr_state);
+extern bool rdt_alloc_capable;
+extern bool rdt_mon_capable;
+
DECLARE_STATIC_KEY_FALSE(rdt_enable_key);
DECLARE_STATIC_KEY_FALSE(rdt_alloc_enable_key);
DECLARE_STATIC_KEY_FALSE(rdt_mon_enable_key);
+static inline bool resctrl_arch_alloc_capable(void)
+{
+ return rdt_alloc_capable;
+}
+
static inline void resctrl_arch_enable_alloc(void)
{
static_branch_enable_cpuslocked(&rdt_alloc_enable_key);
@@ -54,6 +62,11 @@ static inline void resctrl_arch_disable_alloc(void)
static_branch_dec_cpuslocked(&rdt_enable_key);
}
+static inline bool resctrl_arch_mon_capable(void)
+{
+ return rdt_mon_capable;
+}
+
static inline void resctrl_arch_enable_mon(void)
{
static_branch_enable_cpuslocked(&rdt_mon_enable_key);
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 68b9beed8e42..c4c1e1909058 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -138,8 +138,6 @@ struct rmid_read {
void *arch_mon_ctx;
};
-extern bool rdt_alloc_capable;
-extern bool rdt_mon_capable;
extern unsigned int rdt_mon_features;
extern struct list_head resctrl_schema_all;
extern bool resctrl_mounted;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index e3e42736fb22..95020b113ee5 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -839,7 +839,7 @@ void mbm_handle_overflow(struct work_struct *work)
* If the filesystem has been unmounted this work no longer needs to
* run.
*/
- if (!resctrl_mounted || !static_branch_likely(&rdt_mon_enable_key))
+ if (!resctrl_mounted || !resctrl_arch_mon_capable())
goto out_unlock;
r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
@@ -876,7 +876,7 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
* When a domain comes online there is no guarantee the filesystem is
* mounted. If not, there is no need to catch counter overflow.
*/
- if (!resctrl_mounted || !static_branch_likely(&rdt_mon_enable_key))
+ if (!resctrl_mounted || !resctrl_arch_mon_capable())
return;
cpu = cpumask_any_housekeeping(&dom->cpu_mask);
dom->mbm_work_cpu = cpu;
diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
index d8f44113ed1f..8056bed033cc 100644
--- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
+++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
@@ -581,7 +581,7 @@ static int rdtgroup_locksetup_user_restrict(struct rdtgroup *rdtgrp)
if (ret)
goto err_cpus;
- if (rdt_mon_capable) {
+ if (resctrl_arch_mon_capable()) {
ret = rdtgroup_kn_mode_restrict(rdtgrp, "mon_groups");
if (ret)
goto err_cpus_list;
@@ -628,7 +628,7 @@ static int rdtgroup_locksetup_user_restore(struct rdtgroup *rdtgrp)
if (ret)
goto err_cpus;
- if (rdt_mon_capable) {
+ if (resctrl_arch_mon_capable()) {
ret = rdtgroup_kn_mode_restore(rdtgrp, "mon_groups", 0777);
if (ret)
goto err_cpus_list;
@@ -776,7 +776,7 @@ int rdtgroup_locksetup_exit(struct rdtgroup *rdtgrp)
{
int ret;
- if (rdt_mon_capable) {
+ if (resctrl_arch_mon_capable()) {
ret = alloc_rmid(rdtgrp->closid);
if (ret < 0) {
rdt_last_cmd_puts("Out of RMIDs\n");
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 74a8494a0c91..89aef67588c0 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -641,13 +641,13 @@ static int __rdtgroup_move_task(struct task_struct *tsk,
static bool is_closid_match(struct task_struct *t, struct rdtgroup *r)
{
- return (rdt_alloc_capable && (r->type == RDTCTRL_GROUP) &&
+ return (resctrl_arch_alloc_capable() && (r->type == RDTCTRL_GROUP) &&
resctrl_arch_match_closid(t, r->closid));
}
static bool is_rmid_match(struct task_struct *t, struct rdtgroup *r)
{
- return (rdt_mon_capable && (r->type == RDTMON_GROUP) &&
+ return (resctrl_arch_mon_capable() && (r->type == RDTMON_GROUP) &&
resctrl_arch_match_rmid(t, r->mon.parent->closid,
r->mon.rmid));
}
@@ -2637,7 +2637,7 @@ static int rdt_get_tree(struct fs_context *fc)
closid_init();
- if (rdt_mon_capable)
+ if (resctrl_arch_mon_capable())
flags |= RFTYPE_MON;
ret = rdtgroup_add_files(rdtgroup_default.kn, flags);
@@ -2650,7 +2650,7 @@ static int rdt_get_tree(struct fs_context *fc)
if (ret < 0)
goto out_schemata_free;
- if (rdt_mon_capable) {
+ if (resctrl_arch_mon_capable()) {
ret = mongroup_create_dir(rdtgroup_default.kn,
&rdtgroup_default, "mon_groups",
&kn_mongrp);
@@ -2672,12 +2672,12 @@ static int rdt_get_tree(struct fs_context *fc)
if (ret < 0)
goto out_psl;
- if (rdt_alloc_capable)
+ if (resctrl_arch_alloc_capable())
resctrl_arch_enable_alloc();
- if (rdt_mon_capable)
+ if (resctrl_arch_mon_capable())
resctrl_arch_enable_mon();
- if (rdt_alloc_capable || rdt_mon_capable)
+ if (resctrl_arch_alloc_capable() || resctrl_arch_mon_capable())
resctrl_mounted = true;
if (is_mbm_enabled()) {
@@ -2691,10 +2691,10 @@ static int rdt_get_tree(struct fs_context *fc)
out_psl:
rdt_pseudo_lock_release();
out_mondata:
- if (rdt_mon_capable)
+ if (resctrl_arch_mon_capable())
kernfs_remove(kn_mondata);
out_mongrp:
- if (rdt_mon_capable)
+ if (resctrl_arch_mon_capable())
kernfs_remove(kn_mongrp);
out_info:
kernfs_remove(kn_info);
@@ -2949,9 +2949,9 @@ static void rdt_kill_sb(struct super_block *sb)
rdtgroup_default.mode = RDT_MODE_SHAREABLE;
schemata_list_destroy();
rdtgroup_destroy_root();
- if (rdt_alloc_capable)
+ if (resctrl_arch_alloc_capable())
resctrl_arch_disable_alloc();
- if (rdt_mon_capable)
+ if (resctrl_arch_mon_capable())
resctrl_arch_disable_mon();
resctrl_mounted = false;
kernfs_kill_sb(sb);
@@ -3331,7 +3331,7 @@ static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
{
int ret;
- if (!rdt_mon_capable)
+ if (!resctrl_arch_mon_capable())
return 0;
ret = alloc_rmid(rdtgrp->closid);
@@ -3353,7 +3353,7 @@ static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
static void mkdir_rdt_prepare_rmid_free(struct rdtgroup *rgrp)
{
- if (rdt_mon_capable)
+ if (resctrl_arch_mon_capable())
free_rmid(rgrp->closid, rgrp->mon.rmid);
}
@@ -3417,7 +3417,7 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
if (rtype == RDTCTRL_GROUP) {
files = RFTYPE_BASE | RFTYPE_CTRL;
- if (rdt_mon_capable)
+ if (resctrl_arch_mon_capable())
files |= RFTYPE_MON;
} else {
files = RFTYPE_BASE | RFTYPE_MON;
@@ -3526,7 +3526,7 @@ static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn,
list_add(&rdtgrp->rdtgroup_list, &rdt_all_groups);
- if (rdt_mon_capable) {
+ if (resctrl_arch_mon_capable()) {
/*
* Create an empty mon_groups directory to hold the subset
* of tasks and cpus to monitor.
@@ -3581,14 +3581,14 @@ static int rdtgroup_mkdir(struct kernfs_node *parent_kn, const char *name,
* allocation is supported, add a control and monitoring
* subdirectory
*/
- if (rdt_alloc_capable && parent_kn == rdtgroup_default.kn)
+ if (resctrl_arch_alloc_capable() && parent_kn == rdtgroup_default.kn)
return rdtgroup_mkdir_ctrl_mon(parent_kn, name, mode);
/*
* If RDT monitoring is supported and the parent directory is a valid
* "mon_groups" directory, add a monitoring subdirectory.
*/
- if (rdt_mon_capable && is_mon_groups(parent_kn, name))
+ if (resctrl_arch_mon_capable() && is_mon_groups(parent_kn, name))
return rdtgroup_mkdir_mon(parent_kn, name, mode);
return -EPERM;
@@ -3923,7 +3923,7 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
* If resctrl is mounted, remove all the
* per domain monitor data directories.
*/
- if (resctrl_mounted && static_branch_unlikely(&rdt_mon_enable_key))
+ if (resctrl_mounted && resctrl_arch_mon_capable())
rmdir_mondata_subdir_allrdtgrp(r, d->id);
if (is_mbm_enabled())
@@ -4006,7 +4006,7 @@ int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
* by rdt_get_tree() calling mkdir_mondata_all().
* If resctrl is mounted, add per domain monitor data directories.
*/
- if (resctrl_mounted && static_branch_unlikely(&rdt_mon_enable_key))
+ if (resctrl_mounted && resctrl_arch_mon_capable())
mkdir_mondata_subdir_allrdtgrp(r, d);
return 0;
--
2.20.1
The resctrl architecture specific code may need to create a domain when
a CPU comes online, it also needs to reset the CPUs PQR_ASSOC register.
The resctrl filesystem code needs to update the rdtgroup_default CPU
mask when CPUs are brought online.
Currently this is all done in one function, resctrl_online_cpu().
This will need to be split into architecture and filesystem parts
before resctrl can be moved to /fs/.
Pull the rdtgroup_default update work out as a filesystem specific
cpu_online helper. resctrl_online_cpu() is the obvious name for this,
which means the version in core.c needs renaming.
resctrl_online_cpu() is called by the arch code once it has done the
work to add the new CPU to any domains.
In future patches, resctrl_online_cpu() will take the rdtgroup_mutex
itself.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v3:
* Renamed err to ret
Changes since v4:
* Changes in capitalisation.
Changes since v5:
* More changes in capitalisation.
* Made resctrl_online_cpu() return void.
---
arch/x86/kernel/cpu/resctrl/core.c | 8 ++++----
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 8 ++++++++
include/linux/resctrl.h | 1 +
3 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index ba6daef6bd26..8ac89dbf4484 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -608,16 +608,16 @@ static void clear_closid_rmid(int cpu)
RESCTRL_RESERVED_CLOSID);
}
-static int resctrl_online_cpu(unsigned int cpu)
+static int resctrl_arch_online_cpu(unsigned int cpu)
{
struct rdt_resource *r;
mutex_lock(&rdtgroup_mutex);
for_each_capable_rdt_resource(r)
domain_add_cpu(cpu, r);
- /* The cpu is set in default rdtgroup after online. */
- cpumask_set_cpu(cpu, &rdtgroup_default.cpu_mask);
clear_closid_rmid(cpu);
+
+ resctrl_online_cpu(cpu);
mutex_unlock(&rdtgroup_mutex);
return 0;
@@ -969,7 +969,7 @@ static int __init resctrl_late_init(void)
state = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
"x86/resctrl/cat:online:",
- resctrl_online_cpu, resctrl_offline_cpu);
+ resctrl_arch_online_cpu, resctrl_offline_cpu);
if (state < 0)
return state;
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 89aef67588c0..76aa73c49fad 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -4012,6 +4012,14 @@ int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
return 0;
}
+void resctrl_online_cpu(unsigned int cpu)
+{
+ lockdep_assert_held(&rdtgroup_mutex);
+
+ /* The CPU is set in default rdtgroup after online. */
+ cpumask_set_cpu(cpu, &rdtgroup_default.cpu_mask);
+}
+
/*
* rdtgroup_init - rdtgroup initialization
*
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index bf460c912bf5..4c4bad3c34e4 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -223,6 +223,7 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
u32 closid, enum resctrl_conf_type type);
int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d);
void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
+void resctrl_online_cpu(unsigned int cpu);
/**
* resctrl_arch_rmid_read() - Read the eventid counter corresponding to rmid
--
2.20.1
When a CPU is taken offline resctrl may need to move the overflow or
limbo handlers to run on a different CPU.
Once the offline callbacks have been split, cqm_setup_limbo_handler()
will be called while the CPU that is going offline is still present
in the cpu_mask.
Pass the CPU to exclude to cqm_setup_limbo_handler() and
mbm_setup_overflow_handler(). These functions can use a variant of
cpumask_any_but() when selecting the CPU. -1 is used to indicate no CPUs
need excluding.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v2:
* Rephrased a comment to avoid a two letter bad-word. (we)
* Avoid assigning mbm_work_cpu if the domain is going to be free()d
* Added cpumask_any_housekeeping_but(), I dislike the name
Changes since v3:
* Marked an explanatory comment as temporary as the subsequent patch is
no longer adjacent.
Changes since v4:
* Check against RESCTRL_PICK_ANY_CPU instead of -1.
* Leave cqm_work_cpu as nr_cpu_ids when no CPU is available.
* Made cpumask_any_housekeeping_but() more readable.
Changes since v5:
* Changes in captialisation, and a typo.
* Merged cpumask helpers.
Changes since v6:
* Added the missing dom parameter to some kernel doc.
* Re-added use of cpumask_any_but(),
* Expanded comment above cpumask_any_housekeeping(),
* Added some more comments for good measure.
* Added explicit IS_ENABLED() check as gcc-12 doesn't seem to work this out.
Changes since v7:
* Removed the paragraph with the badword 'subsequent'.
* Reworded a comment with the badword 'we'.
* Fixed a bounds checking bug in cpumask_any_housekeeping().
---
arch/x86/kernel/cpu/resctrl/core.c | 8 +++--
arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 2 +-
arch/x86/kernel/cpu/resctrl/internal.h | 33 ++++++++++++++----
arch/x86/kernel/cpu/resctrl/monitor.c | 42 ++++++++++++++++++-----
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 6 ++--
include/linux/resctrl.h | 2 ++
6 files changed, 72 insertions(+), 21 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 8ac89dbf4484..118ac7c28106 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -586,12 +586,16 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
if (r == &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl) {
if (is_mbm_enabled() && cpu == d->mbm_work_cpu) {
cancel_delayed_work(&d->mbm_over);
- mbm_setup_overflow_handler(d, 0);
+ /*
+ * temporary: exclude_cpu=-1 as this CPU has already
+ * been removed by cpumask_clear_cpu()d
+ */
+ mbm_setup_overflow_handler(d, 0, RESCTRL_PICK_ANY_CPU);
}
if (is_llc_occupancy_enabled() && cpu == d->cqm_work_cpu &&
has_busy_rmid(d)) {
cancel_delayed_work(&d->cqm_limbo);
- cqm_setup_limbo_handler(d, 0);
+ cqm_setup_limbo_handler(d, 0, RESCTRL_PICK_ANY_CPU);
}
}
}
diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index a033e8e32108..64db51455df3 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -552,7 +552,7 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
return;
}
- cpu = cpumask_any_housekeeping(&d->cpu_mask);
+ cpu = cpumask_any_housekeeping(&d->cpu_mask, RESCTRL_PICK_ANY_CPU);
/*
* cpumask_any_housekeeping() prefers housekeeping CPUs, but
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index c4c1e1909058..8091eb59b159 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -61,19 +61,36 @@
* cpumask_any_housekeeping() - Choose any CPU in @mask, preferring those that
* aren't marked nohz_full
* @mask: The mask to pick a CPU from.
+ * @exclude_cpu:The CPU to avoid picking.
*
- * Returns a CPU in @mask. If there are housekeeping CPUs that don't use
- * nohz_full, these are preferred.
+ * Returns a CPU from @mask, but not @exclude_cpu. If there are housekeeping
+ * CPUs that don't use nohz_full, these are preferred. Pass
+ * RESCTRL_PICK_ANY_CPU to avoid excluding any CPUs.
+ *
+ * When a CPU is excluded, returns >= nr_cpu_ids if no CPUs are available.
*/
-static inline unsigned int cpumask_any_housekeeping(const struct cpumask *mask)
+static inline unsigned int
+cpumask_any_housekeeping(const struct cpumask *mask, int exclude_cpu)
{
unsigned int cpu, hk_cpu;
- cpu = cpumask_any(mask);
- if (!tick_nohz_full_cpu(cpu))
+ if (exclude_cpu == RESCTRL_PICK_ANY_CPU)
+ cpu = cpumask_any(mask);
+ else
+ cpu = cpumask_any_but(mask, exclude_cpu);
+
+ if (!IS_ENABLED(CONFIG_NO_HZ_FULL))
return cpu;
+ /* If the CPU picked isn't marked nohz_full nothing more needs doing. */
+ if (cpu < nr_cpu_ids && !tick_nohz_full_cpu(cpu))
+ return cpu;
+
+ /* Try to find a CPU that isn't nohz_full to use in preference */
hk_cpu = cpumask_nth_andnot(0, mask, tick_nohz_full_mask);
+ if (hk_cpu == exclude_cpu)
+ hk_cpu = cpumask_nth_andnot(1, mask, tick_nohz_full_mask);
+
if (hk_cpu < nr_cpu_ids)
cpu = hk_cpu;
@@ -575,11 +592,13 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
struct rdt_domain *d, struct rdtgroup *rdtgrp,
int evtid, int first);
void mbm_setup_overflow_handler(struct rdt_domain *dom,
- unsigned long delay_ms);
+ unsigned long delay_ms,
+ int exclude_cpu);
void mbm_handle_overflow(struct work_struct *work);
void __init intel_rdt_mbm_apply_quirk(void);
bool is_mba_sc(struct rdt_resource *r);
-void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms);
+void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms,
+ int exclude_cpu);
void cqm_handle_limbo(struct work_struct *work);
bool has_busy_rmid(struct rdt_domain *d);
void __check_limbo(struct rdt_domain *d, bool force_free);
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 95020b113ee5..c78b51eb1256 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -481,7 +481,8 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
* setup up the limbo worker.
*/
if (!has_busy_rmid(d))
- cqm_setup_limbo_handler(d, CQM_LIMBOCHECK_INTERVAL);
+ cqm_setup_limbo_handler(d, CQM_LIMBOCHECK_INTERVAL,
+ RESCTRL_PICK_ANY_CPU);
set_bit(idx, d->rmid_busy_llc);
entry->busy++;
}
@@ -806,7 +807,8 @@ void cqm_handle_limbo(struct work_struct *work)
__check_limbo(d, false);
if (has_busy_rmid(d)) {
- d->cqm_work_cpu = cpumask_any_housekeeping(&d->cpu_mask);
+ d->cqm_work_cpu = cpumask_any_housekeeping(&d->cpu_mask,
+ RESCTRL_PICK_ANY_CPU);
schedule_delayed_work_on(d->cqm_work_cpu, &d->cqm_limbo,
delay);
}
@@ -814,15 +816,25 @@ void cqm_handle_limbo(struct work_struct *work)
mutex_unlock(&rdtgroup_mutex);
}
-void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms)
+/**
+ * cqm_setup_limbo_handler() - Schedule the limbo handler to run for this
+ * domain.
+ * @dom: The domain the limbo handler should run for.
+ * @delay_ms: How far in the future the handler should run.
+ * @exclude_cpu: Which CPU the handler should not run on,
+ * RESCTRL_PICK_ANY_CPU to pick any CPU.
+ */
+void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms,
+ int exclude_cpu)
{
unsigned long delay = msecs_to_jiffies(delay_ms);
int cpu;
- cpu = cpumask_any_housekeeping(&dom->cpu_mask);
+ cpu = cpumask_any_housekeeping(&dom->cpu_mask, exclude_cpu);
dom->cqm_work_cpu = cpu;
- schedule_delayed_work_on(cpu, &dom->cqm_limbo, delay);
+ if (cpu < nr_cpu_ids)
+ schedule_delayed_work_on(cpu, &dom->cqm_limbo, delay);
}
void mbm_handle_overflow(struct work_struct *work)
@@ -860,14 +872,24 @@ void mbm_handle_overflow(struct work_struct *work)
* Re-check for housekeeping CPUs. This allows the overflow handler to
* move off a nohz_full CPU quickly.
*/
- d->mbm_work_cpu = cpumask_any_housekeeping(&d->cpu_mask);
+ d->mbm_work_cpu = cpumask_any_housekeeping(&d->cpu_mask,
+ RESCTRL_PICK_ANY_CPU);
schedule_delayed_work_on(d->mbm_work_cpu, &d->mbm_over, delay);
out_unlock:
mutex_unlock(&rdtgroup_mutex);
}
-void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
+/**
+ * mbm_setup_overflow_handler() - Schedule the overflow handler to run for this
+ * domain.
+ * @dom: The domain the overflow handler should run for.
+ * @delay_ms: How far in the future the handler should run.
+ * @exclude_cpu: Which CPU the handler should not run on,
+ * RESCTRL_PICK_ANY_CPU to pick any CPU.
+ */
+void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms,
+ int exclude_cpu)
{
unsigned long delay = msecs_to_jiffies(delay_ms);
int cpu;
@@ -878,9 +900,11 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
*/
if (!resctrl_mounted || !resctrl_arch_mon_capable())
return;
- cpu = cpumask_any_housekeeping(&dom->cpu_mask);
+ cpu = cpumask_any_housekeeping(&dom->cpu_mask, exclude_cpu);
dom->mbm_work_cpu = cpu;
- schedule_delayed_work_on(cpu, &dom->mbm_over, delay);
+
+ if (cpu < nr_cpu_ids)
+ schedule_delayed_work_on(cpu, &dom->mbm_over, delay);
}
static int dom_data_init(struct rdt_resource *r)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 76aa73c49fad..fc1b913e54bd 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2683,7 +2683,8 @@ static int rdt_get_tree(struct fs_context *fc)
if (is_mbm_enabled()) {
r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
list_for_each_entry(dom, &r->domains, list)
- mbm_setup_overflow_handler(dom, MBM_OVERFLOW_INTERVAL);
+ mbm_setup_overflow_handler(dom, MBM_OVERFLOW_INTERVAL,
+ RESCTRL_PICK_ANY_CPU);
}
goto out;
@@ -3994,7 +3995,8 @@ int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
if (is_mbm_enabled()) {
INIT_DELAYED_WORK(&d->mbm_over, mbm_handle_overflow);
- mbm_setup_overflow_handler(d, MBM_OVERFLOW_INTERVAL);
+ mbm_setup_overflow_handler(d, MBM_OVERFLOW_INTERVAL,
+ RESCTRL_PICK_ANY_CPU);
}
if (is_llc_occupancy_enabled())
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 4c4bad3c34e4..ccbbbe5d18d3 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -10,6 +10,8 @@
#define RESCTRL_RESERVED_CLOSID 0
#define RESCTRL_RESERVED_RMID 0
+#define RESCTRL_PICK_ANY_CPU -1
+
#ifdef CONFIG_PROC_CPU_RESCTRL
int proc_resctrl_show(struct seq_file *m,
--
2.20.1
The rdt_enable_key is switched when resctrl is mounted, and used to
prevent a second mount of the filesystem. It also enables the
architecture's context switch code.
This requires another architecture to have the same set of static-keys,
as resctrl depends on them too. The existing users of these static-keys
are implicitly also checking if the filesystem is mounted.
Make the resctrl_mounted checks explicit: resctrl can keep track of
whether it has been mounted once. This doesn't need to be combined with
whether the arch code is context switching the CLOSID.
rdt_mon_enable_key is never used just to test that resctrl is mounted,
but does also have this implication. Add a resctrl_mounted to all uses
of rdt_mon_enable_key.
This will allow the static-key changing to be moved behind resctrl_arch_
calls.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v3:
* Removed a newline.
* Rephrased commit message
Changes since v4:
* Rephrased comment.
Changes since v7:
* Removed a sentence with the word 'subsequent' in it.
---
arch/x86/kernel/cpu/resctrl/internal.h | 1 +
arch/x86/kernel/cpu/resctrl/monitor.c | 12 ++++++++++--
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 23 +++++++++++++++++------
3 files changed, 28 insertions(+), 8 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index bb07b9b01e36..5ce49503fcd8 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -145,6 +145,7 @@ extern bool rdt_alloc_capable;
extern bool rdt_mon_capable;
extern unsigned int rdt_mon_features;
extern struct list_head resctrl_schema_all;
+extern bool resctrl_mounted;
enum rdt_group_type {
RDTCTRL_GROUP = 0,
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 20fe7ed494c2..e3e42736fb22 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -835,7 +835,11 @@ void mbm_handle_overflow(struct work_struct *work)
mutex_lock(&rdtgroup_mutex);
- if (!static_branch_likely(&rdt_mon_enable_key))
+ /*
+ * If the filesystem has been unmounted this work no longer needs to
+ * run.
+ */
+ if (!resctrl_mounted || !static_branch_likely(&rdt_mon_enable_key))
goto out_unlock;
r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
@@ -868,7 +872,11 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
unsigned long delay = msecs_to_jiffies(delay_ms);
int cpu;
- if (!static_branch_likely(&rdt_mon_enable_key))
+ /*
+ * When a domain comes online there is no guarantee the filesystem is
+ * mounted. If not, there is no need to catch counter overflow.
+ */
+ if (!resctrl_mounted || !static_branch_likely(&rdt_mon_enable_key))
return;
cpu = cpumask_any_housekeeping(&dom->cpu_mask);
dom->mbm_work_cpu = cpu;
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 460ac501f9e8..646d224c3ac9 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -42,6 +42,9 @@ LIST_HEAD(rdt_all_groups);
/* list of entries for the schemata file */
LIST_HEAD(resctrl_schema_all);
+/* The filesystem can only be mounted once. */
+bool resctrl_mounted;
+
/* Kernel fs node for "info" directory under root */
static struct kernfs_node *kn_info;
@@ -881,7 +884,7 @@ int proc_resctrl_show(struct seq_file *s, struct pid_namespace *ns,
mutex_lock(&rdtgroup_mutex);
/* Return empty if resctrl has not been mounted. */
- if (!static_branch_unlikely(&rdt_enable_key)) {
+ if (!resctrl_mounted) {
seq_puts(s, "res:\nmon:\n");
goto unlock;
}
@@ -2613,7 +2616,7 @@ static int rdt_get_tree(struct fs_context *fc)
/*
* resctrl file system can only be mounted once.
*/
- if (static_branch_unlikely(&rdt_enable_key)) {
+ if (resctrl_mounted) {
ret = -EBUSY;
goto out;
}
@@ -2674,8 +2677,10 @@ static int rdt_get_tree(struct fs_context *fc)
if (rdt_mon_capable)
static_branch_enable_cpuslocked(&rdt_mon_enable_key);
- if (rdt_alloc_capable || rdt_mon_capable)
+ if (rdt_alloc_capable || rdt_mon_capable) {
static_branch_enable_cpuslocked(&rdt_enable_key);
+ resctrl_mounted = true;
+ }
if (is_mbm_enabled()) {
r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
@@ -2949,6 +2954,7 @@ static void rdt_kill_sb(struct super_block *sb)
static_branch_disable_cpuslocked(&rdt_alloc_enable_key);
static_branch_disable_cpuslocked(&rdt_mon_enable_key);
static_branch_disable_cpuslocked(&rdt_enable_key);
+ resctrl_mounted = false;
kernfs_kill_sb(sb);
mutex_unlock(&rdtgroup_mutex);
cpus_read_unlock();
@@ -3918,7 +3924,7 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
* If resctrl is mounted, remove all the
* per domain monitor data directories.
*/
- if (static_branch_unlikely(&rdt_mon_enable_key))
+ if (resctrl_mounted && static_branch_unlikely(&rdt_mon_enable_key))
rmdir_mondata_subdir_allrdtgrp(r, d->id);
if (is_mbm_enabled())
@@ -3995,8 +4001,13 @@ int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
if (is_llc_occupancy_enabled())
INIT_DELAYED_WORK(&d->cqm_limbo, cqm_handle_limbo);
- /* If resctrl is mounted, add per domain monitor data directories. */
- if (static_branch_unlikely(&rdt_mon_enable_key))
+ /*
+ * If the filesystem is not mounted then only the default resource group
+ * exists. Creation of its directories is deferred until mount time
+ * by rdt_get_tree() calling mkdir_mondata_all().
+ * If resctrl is mounted, add per domain monitor data directories.
+ */
+ if (resctrl_mounted && static_branch_unlikely(&rdt_mon_enable_key))
mkdir_mondata_subdir_allrdtgrp(r, d);
return 0;
--
2.20.1
When a CPU is taken offline the resctrl filesystem code needs to check
if it was the CPU nominated to perform the periodic overflow and limbo
work. If so, another CPU needs to be chosen to do this work.
This is currently done in core.c, mixed in with the code that removes
the CPU from the domain's mask, and potentially free()s the domain.
Move the migration of the overflow and limbo helpers into the filesystem
code, into resctrl_offline_cpu(). As resctrl_offline_cpu() runs before
the architecture code has removed the CPU from the domain mask, the
callers need to be told which CPU is being removed, to avoid picking
it as the new CPU. This uses the exclude_cpu feature previously
added.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v5:
* Changed fir tree order of variables.
* Added mon-capable check for cpu offline.
---
arch/x86/kernel/cpu/resctrl/core.c | 16 ----------------
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 18 ++++++++++++++++++
2 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 65540acd59de..c943cb78b2a1 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -582,22 +582,6 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
return;
}
-
- if (r == &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl) {
- if (is_mbm_enabled() && cpu == d->mbm_work_cpu) {
- cancel_delayed_work(&d->mbm_over);
- /*
- * temporary: exclude_cpu=-1 as this CPU has already
- * been removed by cpumask_clear_cpu()d
- */
- mbm_setup_overflow_handler(d, 0, RESCTRL_PICK_ANY_CPU);
- }
- if (is_llc_occupancy_enabled() && cpu == d->cqm_work_cpu &&
- has_busy_rmid(d)) {
- cancel_delayed_work(&d->cqm_limbo);
- cqm_setup_limbo_handler(d, 0, RESCTRL_PICK_ANY_CPU);
- }
- }
}
static void clear_closid_rmid(int cpu)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 958f73974860..f007c488fa31 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -4034,7 +4034,9 @@ static void clear_childcpus(struct rdtgroup *r, unsigned int cpu)
void resctrl_offline_cpu(unsigned int cpu)
{
+ struct rdt_resource *l3 = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
struct rdtgroup *rdtgrp;
+ struct rdt_domain *d;
lockdep_assert_held(&rdtgroup_mutex);
@@ -4044,6 +4046,22 @@ void resctrl_offline_cpu(unsigned int cpu)
break;
}
}
+
+ if (!l3->mon_capable)
+ return;
+
+ d = get_domain_from_cpu(cpu, l3);
+ if (d) {
+ if (is_mbm_enabled() && cpu == d->mbm_work_cpu) {
+ cancel_delayed_work(&d->mbm_over);
+ mbm_setup_overflow_handler(d, 0, cpu);
+ }
+ if (is_llc_occupancy_enabled() && cpu == d->cqm_work_cpu &&
+ has_busy_rmid(d)) {
+ cancel_delayed_work(&d->cqm_limbo);
+ cqm_setup_limbo_handler(d, 0, cpu);
+ }
+ }
}
/*
--
2.20.1
rdt_enable_key is switched when resctrl is mounted. It was also previously
used to prevent a second mount of the filesystem.
Any other architecture that wants to support resctrl has to provide
identical static keys.
Now that there are helpers for enabling and disabling the alloc/mon keys,
resctrl doesn't need to switch this extra key, it can be done by the arch
code. Use the static-key increment and decrement helpers, and change
resctrl to ensure the calls are balanced.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
arch/x86/include/asm/resctrl.h | 4 ++++
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 11 +++++------
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index 3c9137b6ad4f..b74aa34dc9e8 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -45,21 +45,25 @@ DECLARE_STATIC_KEY_FALSE(rdt_mon_enable_key);
static inline void resctrl_arch_enable_alloc(void)
{
static_branch_enable_cpuslocked(&rdt_alloc_enable_key);
+ static_branch_inc_cpuslocked(&rdt_enable_key);
}
static inline void resctrl_arch_disable_alloc(void)
{
static_branch_disable_cpuslocked(&rdt_alloc_enable_key);
+ static_branch_dec_cpuslocked(&rdt_enable_key);
}
static inline void resctrl_arch_enable_mon(void)
{
static_branch_enable_cpuslocked(&rdt_mon_enable_key);
+ static_branch_inc_cpuslocked(&rdt_enable_key);
}
static inline void resctrl_arch_disable_mon(void)
{
static_branch_disable_cpuslocked(&rdt_mon_enable_key);
+ static_branch_dec_cpuslocked(&rdt_enable_key);
}
/*
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 8cc5a0937fa8..74a8494a0c91 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2677,10 +2677,8 @@ static int rdt_get_tree(struct fs_context *fc)
if (rdt_mon_capable)
resctrl_arch_enable_mon();
- if (rdt_alloc_capable || rdt_mon_capable) {
- static_branch_enable_cpuslocked(&rdt_enable_key);
+ if (rdt_alloc_capable || rdt_mon_capable)
resctrl_mounted = true;
- }
if (is_mbm_enabled()) {
r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
@@ -2951,9 +2949,10 @@ static void rdt_kill_sb(struct super_block *sb)
rdtgroup_default.mode = RDT_MODE_SHAREABLE;
schemata_list_destroy();
rdtgroup_destroy_root();
- resctrl_arch_disable_alloc();
- resctrl_arch_disable_mon();
- static_branch_disable_cpuslocked(&rdt_enable_key);
+ if (rdt_alloc_capable)
+ resctrl_arch_disable_alloc();
+ if (rdt_mon_capable)
+ resctrl_arch_disable_mon();
resctrl_mounted = false;
kernfs_kill_sb(sb);
mutex_unlock(&rdtgroup_mutex);
--
2.20.1
The resctrl architecture specific code may need to free a domain when
a CPU goes offline, it also needs to reset the CPUs PQR_ASSOC register.
Amongst other things, the resctrl filesystem code needs to clear this
CPU from the cpu_mask of any control and monitor groups.
Currently this is all done in core.c and called from
resctrl_offline_cpu(), making the split between architecture and
filesystem code unclear.
Move the filesystem work to remove the CPU from the control and monitor
groups into a filesystem helper called resctrl_offline_cpu(), and rename
the one in core.c resctrl_arch_offline_cpu().
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
arch/x86/kernel/cpu/resctrl/core.c | 25 +++++--------------------
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 24 ++++++++++++++++++++++++
include/linux/resctrl.h | 1 +
3 files changed, 30 insertions(+), 20 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 118ac7c28106..65540acd59de 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -627,31 +627,15 @@ static int resctrl_arch_online_cpu(unsigned int cpu)
return 0;
}
-static void clear_childcpus(struct rdtgroup *r, unsigned int cpu)
+static int resctrl_arch_offline_cpu(unsigned int cpu)
{
- struct rdtgroup *cr;
-
- list_for_each_entry(cr, &r->mon.crdtgrp_list, mon.crdtgrp_list) {
- if (cpumask_test_and_clear_cpu(cpu, &cr->cpu_mask)) {
- break;
- }
- }
-}
-
-static int resctrl_offline_cpu(unsigned int cpu)
-{
- struct rdtgroup *rdtgrp;
struct rdt_resource *r;
mutex_lock(&rdtgroup_mutex);
+ resctrl_offline_cpu(cpu);
+
for_each_capable_rdt_resource(r)
domain_remove_cpu(cpu, r);
- list_for_each_entry(rdtgrp, &rdt_all_groups, rdtgroup_list) {
- if (cpumask_test_and_clear_cpu(cpu, &rdtgrp->cpu_mask)) {
- clear_childcpus(rdtgrp, cpu);
- break;
- }
- }
clear_closid_rmid(cpu);
mutex_unlock(&rdtgroup_mutex);
@@ -973,7 +957,8 @@ static int __init resctrl_late_init(void)
state = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
"x86/resctrl/cat:online:",
- resctrl_arch_online_cpu, resctrl_offline_cpu);
+ resctrl_arch_online_cpu,
+ resctrl_arch_offline_cpu);
if (state < 0)
return state;
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index fc1b913e54bd..958f73974860 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -4022,6 +4022,30 @@ void resctrl_online_cpu(unsigned int cpu)
cpumask_set_cpu(cpu, &rdtgroup_default.cpu_mask);
}
+static void clear_childcpus(struct rdtgroup *r, unsigned int cpu)
+{
+ struct rdtgroup *cr;
+
+ list_for_each_entry(cr, &r->mon.crdtgrp_list, mon.crdtgrp_list) {
+ if (cpumask_test_and_clear_cpu(cpu, &cr->cpu_mask))
+ break;
+ }
+}
+
+void resctrl_offline_cpu(unsigned int cpu)
+{
+ struct rdtgroup *rdtgrp;
+
+ lockdep_assert_held(&rdtgroup_mutex);
+
+ list_for_each_entry(rdtgrp, &rdt_all_groups, rdtgroup_list) {
+ if (cpumask_test_and_clear_cpu(cpu, &rdtgrp->cpu_mask)) {
+ clear_childcpus(rdtgrp, cpu);
+ break;
+ }
+ }
+}
+
/*
* rdtgroup_init - rdtgroup initialization
*
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index ccbbbe5d18d3..270ff1d5c051 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -226,6 +226,7 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d);
void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
void resctrl_online_cpu(unsigned int cpu);
+void resctrl_offline_cpu(unsigned int cpu);
/**
* resctrl_arch_rmid_read() - Read the eventid counter corresponding to rmid
--
2.20.1
resctrl has one mutex that is taken by the architecture specific code,
and the filesystem parts. The two interact via cpuhp, where the
architecture code updates the domain list. Filesystem handlers that
walk the domains list should not run concurrently with the cpuhp
callback modifying the list.
Exposing a lock from the filesystem code means the interface is not
cleanly defined, and creates the possibility of cross-architecture
lock ordering headaches. The interaction only exists so that certain
filesystem paths are serialised against CPU hotplug. The CPU hotplug
code already has a mechanism to do this using cpus_read_lock().
MPAM's monitors have an overflow interrupt, so it needs to be possible
to walk the domains list in irq context. RCU is ideal for this,
but some paths need to be able to sleep to allocate memory.
Because resctrl_{on,off}line_cpu() take the rdtgroup_mutex as part
of a cpuhp callback, cpus_read_lock() must always be taken first.
rdtgroup_schemata_write() already does this.
Most of the filesystem code's domain list walkers are currently
protected by the rdtgroup_mutex taken in rdtgroup_kn_lock_live().
The exceptions are rdt_bit_usage_show() and the mon_config helpers
which take the lock directly.
Make the domain list protected by RCU. An architecture-specific
lock prevents concurrent writers. rdt_bit_usage_show() could
walk the domain list using RCU, but to keep all the filesystem
operations the same, this is changed to call cpus_read_lock().
The mon_config helpers send multiple IPIs, take the cpus_read_lock()
in these cases.
The other filesystem list walkers need to be able to sleep.
Add cpus_read_lock() to rdtgroup_kn_lock_live() so that the
cpuhp callbacks can't be invoked when file system operations are
occurring.
Add lockdep_assert_cpus_held() in the cases where the
rdtgroup_kn_lock_live() call isn't obvious.
Resctrl's domain online/offline calls now need to take the
rdtgroup_mutex themselves.
Signed-off-by: James Morse <[email protected]>
Tested-by: Shaopeng Tan <[email protected]>
Tested-by: Peter Newman <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Shaopeng Tan <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
---
Changes since v2:
* Reworded a comment,
* Added a lockdep assertion
* Moved clear_closid_rmid() outside the locked region of cpu
online/offline
Changes since v3:
* Added a header include
Changes since v5:
* Made rdt_bit_usage_show() take the cpus_read_lock() instead of using
RCU.
Changes since v6:
* Added lockdep_is_cpus_held() to get_domain_from_cpu().
* Added cpus_read_lock() around overflow and limbo handlers.
---
arch/x86/kernel/cpu/resctrl/core.c | 44 +++++++++++----
arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 15 ++++-
arch/x86/kernel/cpu/resctrl/monitor.c | 8 +++
arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 3 +
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 68 ++++++++++++++++++-----
include/linux/resctrl.h | 2 +-
6 files changed, 112 insertions(+), 28 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index c943cb78b2a1..4a35369e2d3c 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -16,6 +16,7 @@
#define pr_fmt(fmt) "resctrl: " fmt
+#include <linux/cpu.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/cacheinfo.h>
@@ -25,8 +26,15 @@
#include <asm/resctrl.h>
#include "internal.h"
-/* Mutex to protect rdtgroup access. */
-DEFINE_MUTEX(rdtgroup_mutex);
+/*
+ * rdt_domain structures are kfree()d when their last CPU goes offline,
+ * and allocated when the first CPU in a new domain comes online.
+ * The rdt_resource's domain list is updated when this happens. Readers of
+ * the domain list must either take cpus_read_lock(), or rely on an RCU
+ * read-side critical section, to avoid observing concurrent modification.
+ * All writers take this mutex:
+ */
+static DEFINE_MUTEX(domain_list_lock);
/*
* The cached resctrl_pqr_state is strictly per CPU and can never be
@@ -356,6 +364,15 @@ struct rdt_domain *get_domain_from_cpu(int cpu, struct rdt_resource *r)
{
struct rdt_domain *d;
+ /*
+ * Walking r->domains, ensure it can't race with cpuhp.
+ * Because this is called via IPI by rdt_ctrl_update(), assertions
+ * about locks this thread holds will lead to false positives. Check
+ * someone is holding the CPUs lock.
+ */
+ if (IS_ENABLED(CONFIG_LOCKDEP))
+ lockdep_is_cpus_held();
+
list_for_each_entry(d, &r->domains, list) {
/* Find the domain that contains this CPU */
if (cpumask_test_cpu(cpu, &d->cpu_mask))
@@ -512,6 +529,8 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
struct rdt_domain *d;
int err;
+ lockdep_assert_held(&domain_list_lock);
+
d = rdt_find_domain(r, id, &add_pos);
if (IS_ERR(d)) {
pr_warn("Couldn't find cache id for CPU %d\n", cpu);
@@ -545,11 +564,12 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
return;
}
- list_add_tail(&d->list, add_pos);
+ list_add_tail_rcu(&d->list, add_pos);
err = resctrl_online_domain(r, d);
if (err) {
- list_del(&d->list);
+ list_del_rcu(&d->list);
+ synchronize_rcu();
domain_free(hw_dom);
}
}
@@ -560,6 +580,8 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
struct rdt_hw_domain *hw_dom;
struct rdt_domain *d;
+ lockdep_assert_held(&domain_list_lock);
+
d = rdt_find_domain(r, id, NULL);
if (IS_ERR_OR_NULL(d)) {
pr_warn("Couldn't find cache id for CPU %d\n", cpu);
@@ -570,7 +592,8 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
cpumask_clear_cpu(cpu, &d->cpu_mask);
if (cpumask_empty(&d->cpu_mask)) {
resctrl_offline_domain(r, d);
- list_del(&d->list);
+ list_del_rcu(&d->list);
+ synchronize_rcu();
/*
* rdt_domain "d" is going to be freed below, so clear
@@ -600,13 +623,13 @@ static int resctrl_arch_online_cpu(unsigned int cpu)
{
struct rdt_resource *r;
- mutex_lock(&rdtgroup_mutex);
+ mutex_lock(&domain_list_lock);
for_each_capable_rdt_resource(r)
domain_add_cpu(cpu, r);
- clear_closid_rmid(cpu);
+ mutex_unlock(&domain_list_lock);
+ clear_closid_rmid(cpu);
resctrl_online_cpu(cpu);
- mutex_unlock(&rdtgroup_mutex);
return 0;
}
@@ -615,13 +638,14 @@ static int resctrl_arch_offline_cpu(unsigned int cpu)
{
struct rdt_resource *r;
- mutex_lock(&rdtgroup_mutex);
resctrl_offline_cpu(cpu);
+ mutex_lock(&domain_list_lock);
for_each_capable_rdt_resource(r)
domain_remove_cpu(cpu, r);
+ mutex_unlock(&domain_list_lock);
+
clear_closid_rmid(cpu);
- mutex_unlock(&rdtgroup_mutex);
return 0;
}
diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index 64db51455df3..dc59643498bf 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -212,6 +212,9 @@ static int parse_line(char *line, struct resctrl_schema *s,
struct rdt_domain *d;
unsigned long dom_id;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP &&
(r->rid == RDT_RESOURCE_MBA || r->rid == RDT_RESOURCE_SMBA)) {
rdt_last_cmd_puts("Cannot pseudo-lock MBA resource\n");
@@ -316,6 +319,9 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid)
struct rdt_domain *d;
u32 idx;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
if (!zalloc_cpumask_var(&cpu_mask, GFP_KERNEL))
return -ENOMEM;
@@ -381,11 +387,9 @@ ssize_t rdtgroup_schemata_write(struct kernfs_open_file *of,
return -EINVAL;
buf[nbytes - 1] = '\0';
- cpus_read_lock();
rdtgrp = rdtgroup_kn_lock_live(of->kn);
if (!rdtgrp) {
rdtgroup_kn_unlock(of->kn);
- cpus_read_unlock();
return -ENOENT;
}
rdt_last_cmd_clear();
@@ -447,7 +451,6 @@ ssize_t rdtgroup_schemata_write(struct kernfs_open_file *of,
out:
rdt_staged_configs_clear();
rdtgroup_kn_unlock(of->kn);
- cpus_read_unlock();
return ret ?: nbytes;
}
@@ -467,6 +470,9 @@ static void show_doms(struct seq_file *s, struct resctrl_schema *schema, int clo
bool sep = false;
u32 ctrl_val;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
seq_printf(s, "%*s:", max_name_width, schema->name);
list_for_each_entry(dom, &r->domains, list) {
if (sep)
@@ -537,6 +543,9 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
{
int cpu;
+ /* When picking a CPU from cpu_mask, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
/*
* Setup the parameters to pass to mon_event_count() to read the data.
*/
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index c78b51eb1256..971ca45fc4e6 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -15,6 +15,7 @@
* Software Developer Manual June 2016, volume 3, section 17.17.
*/
+#include <linux/cpu.h>
#include <linux/module.h>
#include <linux/sizes.h>
#include <linux/slab.h>
@@ -472,6 +473,9 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
lockdep_assert_held(&rdtgroup_mutex);
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
idx = resctrl_arch_rmid_idx_encode(entry->closid, entry->rmid);
entry->busy = 0;
@@ -800,6 +804,7 @@ void cqm_handle_limbo(struct work_struct *work)
unsigned long delay = msecs_to_jiffies(CQM_LIMBOCHECK_INTERVAL);
struct rdt_domain *d;
+ cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
d = container_of(work, struct rdt_domain, cqm_limbo.work);
@@ -814,6 +819,7 @@ void cqm_handle_limbo(struct work_struct *work)
}
mutex_unlock(&rdtgroup_mutex);
+ cpus_read_unlock();
}
/**
@@ -845,6 +851,7 @@ void mbm_handle_overflow(struct work_struct *work)
struct rdt_resource *r;
struct rdt_domain *d;
+ cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
/*
@@ -878,6 +885,7 @@ void mbm_handle_overflow(struct work_struct *work)
out_unlock:
mutex_unlock(&rdtgroup_mutex);
+ cpus_read_unlock();
}
/**
diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
index 8056bed033cc..884b88e25141 100644
--- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
+++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
@@ -844,6 +844,9 @@ bool rdtgroup_pseudo_locked_in_hierarchy(struct rdt_domain *d)
struct rdt_domain *d_i;
bool ret = false;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
if (!zalloc_cpumask_var(&cpu_with_psl, GFP_KERNEL))
return true;
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index f007c488fa31..39b807a28a55 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -35,6 +35,10 @@
DEFINE_STATIC_KEY_FALSE(rdt_enable_key);
DEFINE_STATIC_KEY_FALSE(rdt_mon_enable_key);
DEFINE_STATIC_KEY_FALSE(rdt_alloc_enable_key);
+
+/* Mutex to protect rdtgroup access. */
+DEFINE_MUTEX(rdtgroup_mutex);
+
static struct kernfs_root *rdt_root;
struct rdtgroup rdtgroup_default;
LIST_HEAD(rdt_all_groups);
@@ -1014,6 +1018,7 @@ static int rdt_bit_usage_show(struct kernfs_open_file *of,
bool sep = false;
u32 ctrl_val;
+ cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
hw_shareable = r->cache.shareable_bits;
list_for_each_entry(dom, &r->domains, list) {
@@ -1074,6 +1079,7 @@ static int rdt_bit_usage_show(struct kernfs_open_file *of,
}
seq_putc(seq, '\n');
mutex_unlock(&rdtgroup_mutex);
+ cpus_read_unlock();
return 0;
}
@@ -1329,6 +1335,9 @@ static bool rdtgroup_mode_test_exclusive(struct rdtgroup *rdtgrp)
struct rdt_domain *d;
u32 ctrl;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
list_for_each_entry(s, &resctrl_schema_all, list) {
r = s->res;
if (r->rid == RDT_RESOURCE_MBA || r->rid == RDT_RESOURCE_SMBA)
@@ -1593,6 +1602,7 @@ static int mbm_config_show(struct seq_file *s, struct rdt_resource *r, u32 evtid
struct rdt_domain *dom;
bool sep = false;
+ cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
list_for_each_entry(dom, &r->domains, list) {
@@ -1609,6 +1619,7 @@ static int mbm_config_show(struct seq_file *s, struct rdt_resource *r, u32 evtid
seq_puts(s, "\n");
mutex_unlock(&rdtgroup_mutex);
+ cpus_read_unlock();
return 0;
}
@@ -1700,6 +1711,9 @@ static int mon_config_write(struct rdt_resource *r, char *tok, u32 evtid)
struct rdt_domain *d;
int ret = 0;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
next:
if (!tok || tok[0] == '\0')
return 0;
@@ -1741,6 +1755,7 @@ static ssize_t mbm_total_bytes_config_write(struct kernfs_open_file *of,
if (nbytes == 0 || buf[nbytes - 1] != '\n')
return -EINVAL;
+ cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
rdt_last_cmd_clear();
@@ -1750,6 +1765,7 @@ static ssize_t mbm_total_bytes_config_write(struct kernfs_open_file *of,
ret = mon_config_write(r, buf, QOS_L3_MBM_TOTAL_EVENT_ID);
mutex_unlock(&rdtgroup_mutex);
+ cpus_read_unlock();
return ret ?: nbytes;
}
@@ -1765,6 +1781,7 @@ static ssize_t mbm_local_bytes_config_write(struct kernfs_open_file *of,
if (nbytes == 0 || buf[nbytes - 1] != '\n')
return -EINVAL;
+ cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
rdt_last_cmd_clear();
@@ -1774,6 +1791,7 @@ static ssize_t mbm_local_bytes_config_write(struct kernfs_open_file *of,
ret = mon_config_write(r, buf, QOS_L3_MBM_LOCAL_EVENT_ID);
mutex_unlock(&rdtgroup_mutex);
+ cpus_read_unlock();
return ret ?: nbytes;
}
@@ -2250,6 +2268,9 @@ static int set_cache_qos_cfg(int level, bool enable)
struct rdt_domain *d;
int cpu;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
if (level == RDT_RESOURCE_L3)
update = l3_qos_cfg_update;
else if (level == RDT_RESOURCE_L2)
@@ -2449,6 +2470,7 @@ struct rdtgroup *rdtgroup_kn_lock_live(struct kernfs_node *kn)
rdtgroup_kn_get(rdtgrp, kn);
+ cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
/* Was this group deleted while we waited? */
@@ -2466,6 +2488,8 @@ void rdtgroup_kn_unlock(struct kernfs_node *kn)
return;
mutex_unlock(&rdtgroup_mutex);
+ cpus_read_unlock();
+
rdtgroup_kn_put(rdtgrp, kn);
}
@@ -2798,6 +2822,9 @@ static int reset_all_ctrls(struct rdt_resource *r)
struct rdt_domain *d;
int i;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
if (!zalloc_cpumask_var(&cpu_mask, GFP_KERNEL))
return -ENOMEM;
@@ -3082,6 +3109,9 @@ static int mkdir_mondata_subdir_alldom(struct kernfs_node *parent_kn,
struct rdt_domain *dom;
int ret;
+ /* Walking r->domains, ensure it can't race with cpuhp */
+ lockdep_assert_cpus_held();
+
list_for_each_entry(dom, &r->domains, list) {
ret = mkdir_mondata_subdir(parent_kn, dom, r, prgrp);
if (ret)
@@ -3912,13 +3942,13 @@ static void domain_destroy_mon_state(struct rdt_domain *d)
void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
{
- lockdep_assert_held(&rdtgroup_mutex);
+ mutex_lock(&rdtgroup_mutex);
if (supports_mba_mbps() && r->rid == RDT_RESOURCE_MBA)
mba_sc_domain_destroy(r, d);
if (!r->mon_capable)
- return;
+ goto out_unlock;
/*
* If resctrl is mounted, remove all the
@@ -3943,6 +3973,9 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
}
domain_destroy_mon_state(d);
+
+out_unlock:
+ mutex_unlock(&rdtgroup_mutex);
}
static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)
@@ -3978,20 +4011,22 @@ static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)
int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
{
- int err;
+ int err = 0;
- lockdep_assert_held(&rdtgroup_mutex);
+ mutex_lock(&rdtgroup_mutex);
- if (supports_mba_mbps() && r->rid == RDT_RESOURCE_MBA)
+ if (supports_mba_mbps() && r->rid == RDT_RESOURCE_MBA) {
/* RDT_RESOURCE_MBA is never mon_capable */
- return mba_sc_domain_allocate(r, d);
+ err = mba_sc_domain_allocate(r, d);
+ goto out_unlock;
+ }
if (!r->mon_capable)
- return 0;
+ goto out_unlock;
err = domain_setup_mon_state(r, d);
if (err)
- return err;
+ goto out_unlock;
if (is_mbm_enabled()) {
INIT_DELAYED_WORK(&d->mbm_over, mbm_handle_overflow);
@@ -4011,15 +4046,18 @@ int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
if (resctrl_mounted && resctrl_arch_mon_capable())
mkdir_mondata_subdir_allrdtgrp(r, d);
- return 0;
+out_unlock:
+ mutex_unlock(&rdtgroup_mutex);
+
+ return err;
}
void resctrl_online_cpu(unsigned int cpu)
{
- lockdep_assert_held(&rdtgroup_mutex);
-
+ mutex_lock(&rdtgroup_mutex);
/* The CPU is set in default rdtgroup after online. */
cpumask_set_cpu(cpu, &rdtgroup_default.cpu_mask);
+ mutex_unlock(&rdtgroup_mutex);
}
static void clear_childcpus(struct rdtgroup *r, unsigned int cpu)
@@ -4038,8 +4076,7 @@ void resctrl_offline_cpu(unsigned int cpu)
struct rdtgroup *rdtgrp;
struct rdt_domain *d;
- lockdep_assert_held(&rdtgroup_mutex);
-
+ mutex_lock(&rdtgroup_mutex);
list_for_each_entry(rdtgrp, &rdt_all_groups, rdtgroup_list) {
if (cpumask_test_and_clear_cpu(cpu, &rdtgrp->cpu_mask)) {
clear_childcpus(rdtgrp, cpu);
@@ -4048,7 +4085,7 @@ void resctrl_offline_cpu(unsigned int cpu)
}
if (!l3->mon_capable)
- return;
+ goto out_unlock;
d = get_domain_from_cpu(cpu, l3);
if (d) {
@@ -4062,6 +4099,9 @@ void resctrl_offline_cpu(unsigned int cpu)
cqm_setup_limbo_handler(d, 0, cpu);
}
}
+
+out_unlock:
+ mutex_unlock(&rdtgroup_mutex);
}
/*
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 270ff1d5c051..a365f67131ec 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -159,7 +159,7 @@ struct resctrl_schema;
* @cache_level: Which cache level defines scope of this resource
* @cache: Cache allocation related data
* @membw: If the component has bandwidth controls, their properties.
- * @domains: All domains for this resource
+ * @domains: RCU list of all domains for this resource
* @name: Name to use in "schemata" file.
* @data_width: Character width of data when displaying
* @default_ctrl: Specifies default cache cbm or memory B/W percent.
--
2.20.1
On Fri, Dec 15 2023 at 17:43, James Morse wrote:
> tick_nohz_full_mask lists the CPUs that are nohz_full. This is only
> needed when CONFIG_NO_HZ_FULL is defined. tick_nohz_full_cpu() allows
> a specific CPU to be tested against the mask, and evaluates to false
> when CONFIG_NO_HZ_FULL is not defined.
>
> The resctrl code needs to pick a CPU to run some work on, a new helper
> prefers housekeeping CPUs by examining the tick_nohz_full_mask. Hiding
> the declaration behind #ifdef CONFIG_NO_HZ_FULL forces all the users to
> be behind an ifdef too.
>
> Move the tick_nohz_full_mask declaration, this lets callers drop the
> ifdef, and guard access to tick_nohz_full_mask with IS_ENABLED() or
> something like tick_nohz_full_cpu().
>
> The definition does not need to be moved as any callers should be
> removed at compile time unless CONFIG_NO_HZ_FULL is defined.
I can pick that up separately, but I'm fine when it goes with the
resctrl lot. For that case:
Reviewed-by: Thomas Gleixner <[email protected]>
Hi James,
On 12/15/2023 9:43 AM, James Morse wrote:
> x86 systems identify traffic using the CLOSID and RMID. The CLOSID is
> used to lookup the control policy, the RMID is used for monitoring. For
> x86 these are independent numbers.
> Arm's MPAM has equivalent features PARTID and PMG, where the PARTID is
> used to lookup the control policy. The PMG in contrast is a small number
> of bits that are used to subdivide PARTID when monitoring. The
> cache-occupancy monitors require the PARTID to be specified when
> monitoring.
>
> This means MPAM's PMG field is not unique. There are multiple PMG-0, one
> per allocated CLOSID/PARTID. If PMG is treated as equivalent to RMID, it
> cannot be allocated as an independent number. Bitmaps like rmid_busy_llc
> need to be sized by the number of unique entries for this resource.
>
> Treat the combined CLOSID and RMID as an index, and provide architecture
> helpers to pack and unpack an index. This makes the MPAM values unique.
> The domain's rmid_busy_llc and rmid_ptrs[] are then sized by index, as
> are domain mbm_local[] and mbm_total[].
>
> x86 can ignore the CLOSID field when packing and unpacking an index, and
> report as many indexes as RMID.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Shaopeng Tan <[email protected]>
> Tested-by: Peter Newman <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Shaopeng Tan <[email protected]>
> Reviewed-by: Babu Moger <[email protected]>
> ---
Reviewed-by: Reinette Chatre <[email protected]>
Reinette
Hi James,
On 12/15/2023 9:43 AM, James Morse wrote:
> x86's RMID are independent of the CLOSID. An RMID can be allocated,
> used and freed without considering the CLOSID.
>
> MPAM's equivalent feature is PMG, which is not an independent number,
> it extends the CLOSID/PARTID space. For MPAM, only PMG-bits worth of
> 'RMID' can be allocated for a single CLOSID.
> i.e. if there is 1 bit of PMG space, then each CLOSID can have two
> monitor groups.
>
> To allow resctrl to disambiguate RMID values for different CLOSID,
> everything in resctrl that keeps an RMID value needs to know the CLOSID
> too. This will always be ignored on x86.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Shaopeng Tan <[email protected]>
> Tested-by: Peter Newman <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Shaopeng Tan <[email protected]>
> Reviewed-by: Xin Hao <[email protected]>
> ---
Reviewed-by: Reinette Chatre <[email protected]>
Reinette
Hi James,
On 12/15/2023 9:43 AM, James Morse wrote:
> rmid_ptrs[] is allocated from dom_data_init() but never free()d.
>
> While the exit text ends up in the linker script's DISCARD section,
> the direction of travel is for resctrl to be/have loadable modules.
>
> Add resctrl_put_mon_l3_config() to cleanup any memory allocated
> by rdt_get_mon_l3_config().
>
> There is no reason to backport this to a stable kernel.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Babu Moger <[email protected]>
> ---
> Changes since v5:
> * This patch is new
>
> Changes since v6:
> * Removed struct rdt_resource argument, added __exit markers to match the
> only caller.
> * Adedd a whole stack of functions to maintain symmetry.
>
> Changes since v7:
> * Moved the eventual kfree() call to be after rdtgroup_exit()
> ---
> arch/x86/kernel/cpu/resctrl/core.c | 6 ++++++
> arch/x86/kernel/cpu/resctrl/internal.h | 1 +
> arch/x86/kernel/cpu/resctrl/monitor.c | 15 +++++++++++++++
> 3 files changed, 22 insertions(+)
>
> diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
> index 19e0681f0435..b5d4b76f97c5 100644
> --- a/arch/x86/kernel/cpu/resctrl/core.c
> +++ b/arch/x86/kernel/cpu/resctrl/core.c
> @@ -992,8 +992,14 @@ late_initcall(resctrl_late_init);
>
> static void __exit resctrl_exit(void)
> {
> + struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
> +
> cpuhp_remove_state(rdt_online);
> +
> rdtgroup_exit();
> +
> + if (r->mon_capable)
> + rdt_put_mon_l3_config(r);
> }
>
> __exitcall(resctrl_exit);
> diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
> index a4f1aa15f0a2..f68c6aecfa66 100644
> --- a/arch/x86/kernel/cpu/resctrl/internal.h
> +++ b/arch/x86/kernel/cpu/resctrl/internal.h
> @@ -546,6 +546,7 @@ void closid_free(int closid);
> int alloc_rmid(void);
> void free_rmid(u32 rmid);
> int rdt_get_mon_l3_config(struct rdt_resource *r);
> +void __exit rdt_put_mon_l3_config(struct rdt_resource *r);
> bool __init rdt_cpu_has(int flag);
> void mon_event_count(void *info);
> int rdtgroup_mondata_show(struct seq_file *m, void *arg);
> diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
> index f136ac046851..5d9864919f1c 100644
> --- a/arch/x86/kernel/cpu/resctrl/monitor.c
> +++ b/arch/x86/kernel/cpu/resctrl/monitor.c
> @@ -741,6 +741,16 @@ static int dom_data_init(struct rdt_resource *r)
> return 0;
> }
>
> +static void __exit dom_data_exit(struct rdt_resource *r)
> +{
> + mutex_lock(&rdtgroup_mutex);
> +
> + kfree(rmid_ptrs);
> + rmid_ptrs = NULL;
> +
> + mutex_unlock(&rdtgroup_mutex);
> +}
> +
> static struct mon_evt llc_occupancy_event = {
> .name = "llc_occupancy",
> .evtid = QOS_L3_OCCUP_EVENT_ID,
> @@ -830,6 +840,11 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r)
> return 0;
> }
>
> +void __exit rdt_put_mon_l3_config(struct rdt_resource *r)
> +{
> + dom_data_exit(r);
> +}
> +
I expected the unused resource parameter to be removed because you said ([1]) it would.
> void __init intel_rdt_mbm_apply_quirk(void)
> {
> int cf_index;
Reinette
[1] https://lore.kernel.org/lkml/[email protected]/
Hi James,
On 12/15/2023 9:43 AM, James Morse wrote:
> When a CPU is taken offline resctrl may need to move the overflow or
> limbo handlers to run on a different CPU.
>
> Once the offline callbacks have been split, cqm_setup_limbo_handler()
> will be called while the CPU that is going offline is still present
> in the cpu_mask.
>
> Pass the CPU to exclude to cqm_setup_limbo_handler() and
> mbm_setup_overflow_handler(). These functions can use a variant of
> cpumask_any_but() when selecting the CPU. -1 is used to indicate no CPUs
> need excluding.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Shaopeng Tan <[email protected]>
> Tested-by: Peter Newman <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Shaopeng Tan <[email protected]>
> Reviewed-by: Babu Moger <[email protected]>
> ---
Reviewed-by: Reinette Chatre <[email protected]>
Reinette
Hi James,
On 12/15/2023 9:43 AM, James Morse wrote:
> MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
> used for different control groups.
>
> This means once a CLOSID is allocated, all its monitoring ids may still be
> dirty, and held in limbo.
>
> Instead of allocating the first free CLOSID, on architectures where
> CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is enabled, search
> closid_num_dirty_rmid[] to find the cleanest CLOSID.
>
> The CLOSID found is returned to closid_alloc() for the free list
> to be updated.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Shaopeng Tan <[email protected]>
> Tested-by: Peter Newman <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Shaopeng Tan <[email protected]>
> Reviewed-by: Reinette Chatre <[email protected]>
> Reviewed-by: Babu Moger <[email protected]>
> ---
> Changes since v4:
> * Dropped stale section from comment
>
> Changes since v5:
> * Renamed some variables.
>
> Changes since v7:
> * Made comments over closid_num_dirty_rmid() not a kdoc comment.
(This is an example of me not relying on you dropping my reviewed-by tag
to take a look at new changes.)
This change is unexpected and does not have anything to do with this patch.
Instead it just seems to undo a change that sneaked into patch #8
of this series.
Reinette
James Morse <[email protected]> writes:
> This series does two things, it changes resctrl to call resctrl_arch_rmid_read()
> in a way that works for MPAM, and it separates the locking so that the arch code
> and filesystem code don't have to share a mutex. I tried to split this as two
> series, but these touch similar call sites, so it would create more work.
>
> (What's MPAM? See the cover letter of the first series. [1])
Thanks, James. This is really useful for us at Ampere since it enables
the MPAM driver on top of this series.
I've tested this series on an Ampere implementation, by successfully
using resctrl to configure and exercise MPAM functionality. I can't
speak to the effects of the refactor on x86 since I have not tested that
all.
For the series:
Tested-by: Carl Worth <[email protected]>
-Carl
Hi James,
Tested the series. Looks good.
Thanks
Babu
On 12/15/23 11:43, James Morse wrote:
> Some of the changes this version are:
> * Fixed a bounds checking bug in cpumask_any_housekeeping(),
> * Moved the kfree() of rmid_ptrs[] later,
>
> Changes are noted in each patch, I've not added 'no changes' notes
> if these need double checking anyway. I'll try again next series.
>
> ~
>
> This series does two things, it changes resctrl to call resctrl_arch_rmid_read()
> in a way that works for MPAM, and it separates the locking so that the arch code
> and filesystem code don't have to share a mutex. I tried to split this as two
> series, but these touch similar call sites, so it would create more work.
>
> (What's MPAM? See the cover letter of the first series. [1])
>
> On x86 the RMID is an independent number. MPAMs equivalent is PMG, but this
> isn't an independent number - it extends the PARTID (same as CLOSID) space
> with bits that aren't used to select the configuration. The monitors can
> then be told to match specific PMG values, allowing monitor-groups to be
> created.
>
> But, MPAM expects the monitors to always monitor by PARTID. The
> Cache-storage-utilisation counters can only work this way.
> (In the MPAM spec not setting the MATCH_PARTID bit is made CONSTRAINED
> UNPREDICTABLE - which is Arm's term to mean portable software can't rely on
> this)
>
> It gets worse, as some SoCs may have very few PMG bits. I've seen the
> datasheet for one that has a single bit of PMG space.
>
> To be usable, MPAM's counters always need the PARTID and the PMG.
> For resctrl, this means always making the CLOSID available when the RMID
> is used.
>
> To ensure RMID are always unique, this series combines the CLOSID and RMID
> into an index, and manages RMID based on that. For x86, the index and RMID
> would always be the same.
>
>
> Currently the architecture specific code in the cpuhp callbacks takes the
> rdtgroup_mutex. This means the filesystem code would have to export this
> lock, resulting in an ill-defined interface between the two, and the possibility
> of cross-architecture lock-ordering head aches.
>
> The second part of this series adds a domain_list_lock to protect writes to the
> domain list, and protects the domain list with RCU - or cpus_read_lock().
>
> Use of RCU is to allow lockless readers of the domain list. To get MPAMs monitors
> working, its very likely they'll need to be plumbed up to perf. An uncore PMU
> driver would need to be a lockless reader of the domain list.
>
>
>
> This series is based on v6.7-rc2, and can be retrieved from:
> https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/monitors_and_locking/v8
>
> Bugs welcome,
>
> Thanks,
>
> James
>
> [1] https://lore.kernel.org/lkml/[email protected]/
> [v1] https://lore.kernel.org/all/[email protected]/
> [v2] https://lore.kernel.org/lkml/[email protected]/
> [v3] https://lore.kernel.org/r/[email protected]/
> [v4] https://lore.kernel.org/r/[email protected]/
> [v5] https://lore.kernel.org/lkml/[email protected]/
> [v6] https://lore.kernel.org/all/[email protected]/
> [v7] https://lore.kernel.org/r/[email protected]/
>
> James Morse (24):
> tick/nohz: Move tick_nohz_full_mask declaration outside the #ifdef
> x86/resctrl: kfree() rmid_ptrs from resctrl_exit()
> x86/resctrl: Create helper for RMID allocation and mondata dir
> creation
> x86/resctrl: Move rmid allocation out of mkdir_rdt_prepare()
> x86/resctrl: Track the closid with the rmid
> x86/resctrl: Access per-rmid structures by index
> x86/resctrl: Allow RMID allocation to be scoped by CLOSID
> x86/resctrl: Track the number of dirty RMID a CLOSID has
> x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding
> x86/resctrl: Allocate the cleanest CLOSID by searching
> closid_num_dirty_rmid
> x86/resctrl: Move CLOSID/RMID matching and setting to use helpers
> x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow
> x86/resctrl: Queue mon_event_read() instead of sending an IPI
> x86/resctrl: Allow resctrl_arch_rmid_read() to sleep
> x86/resctrl: Allow arch to allocate memory needed in
> resctrl_arch_rmid_read()
> x86/resctrl: Make resctrl_mounted checks explicit
> x86/resctrl: Move alloc/mon static keys into helpers
> x86/resctrl: Make rdt_enable_key the arch's decision to switch
> x86/resctrl: Add helpers for system wide mon/alloc capable
> x86/resctrl: Add CPU online callback for resctrl work
> x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but
> cpu
> x86/resctrl: Add CPU offline callback for resctrl work
> x86/resctrl: Move domain helper migration into resctrl_offline_cpu()
> x86/resctrl: Separate arch and fs resctrl locks
>
> arch/x86/include/asm/resctrl.h | 90 +++++
> arch/x86/kernel/cpu/resctrl/core.c | 102 ++---
> arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 48 ++-
> arch/x86/kernel/cpu/resctrl/internal.h | 67 +++-
> arch/x86/kernel/cpu/resctrl/monitor.c | 449 +++++++++++++++++-----
> arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 15 +-
> arch/x86/kernel/cpu/resctrl/rdtgroup.c | 359 ++++++++++++-----
> include/linux/resctrl.h | 48 ++-
> include/linux/tick.h | 9 +-
> 9 files changed, 911 insertions(+), 276 deletions(-)
>
--
Thanks
Babu Moger
On 12/15/23 11:43, James Morse wrote:
> MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
> used for different control groups.
>
> This means once a CLOSID is allocated, all its monitoring ids may still be
> dirty, and held in limbo.
>
> Keep track of the number of RMID held in limbo each CLOSID has. This will
> allow a future helper to find the 'cleanest' CLOSID when allocating.
>
> The array is only needed when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is
> defined. This will never be the case on x86.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Shaopeng Tan <[email protected]>
> Tested-by: Peter Newman <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Shaopeng Tan <[email protected]>
> Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
> ---
> Changes since v4:
> * Moved closid_num_dirty_rmid[] update under entry->busy check
> * Take the mutex in dom_data_init() as the caller doesn't.
>
> Changes since v5:
> * Added braces after an else.
> * Made closid_num_dirty_rmid an unsigned int.
> * Moved mutex_lock() in dom_data_init() to cover the whole function.
>
> Changes since v6:
> * Made closid_num_dirty_rmid[] and associated tmp variables u32.
>
> Changes since v7:
> * Clobber kfree()d variable with NULL.
> * Guard the use of closid_num_dirty_rmid with IS_ENABLED() so it can be
> optimised out on x86.
> ---
> arch/x86/kernel/cpu/resctrl/monitor.c | 69 +++++++++++++++++++++++----
> 1 file changed, 59 insertions(+), 10 deletions(-)
>
> diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
> index 1f371b108a74..6dfc68c800c8 100644
> --- a/arch/x86/kernel/cpu/resctrl/monitor.c
> +++ b/arch/x86/kernel/cpu/resctrl/monitor.c
> @@ -50,6 +50,13 @@ struct rmid_entry {
> */
> static LIST_HEAD(rmid_free_lru);
>
> +/**
> + * @closid_num_dirty_rmid The number of dirty RMID each CLOSID has.
> + * Only allocated when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is defined.
> + * Indexed by CLOSID. Protected by rdtgroup_mutex.
> + */
> +static u32 *closid_num_dirty_rmid;
> +
> /*
> * @rmid_limbo_count - count of currently unused but (potentially)
> * dirty RMIDs.
> @@ -292,6 +299,17 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> return 0;
> }
>
> +static void limbo_release_entry(struct rmid_entry *entry)
> +{
> + lockdep_assert_held(&rdtgroup_mutex);
> +
> + rmid_limbo_count--;
> + list_add_tail(&entry->list, &rmid_free_lru);
> +
> + if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
> + closid_num_dirty_rmid[entry->closid]--;
> +}
> +
> /*
> * Check the RMIDs that are marked as busy for this domain. If the
> * reported LLC occupancy is below the threshold clear the busy bit and
> @@ -328,10 +346,8 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
>
> if (force_free || !rmid_dirty) {
> clear_bit(idx, d->rmid_busy_llc);
> - if (!--entry->busy) {
> - rmid_limbo_count--;
> - list_add_tail(&entry->list, &rmid_free_lru);
> - }
> + if (!--entry->busy)
> + limbo_release_entry(entry);
> }
> cur_idx = idx + 1;
> }
> @@ -398,6 +414,8 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
> u64 val = 0;
> u32 idx;
>
> + lockdep_assert_held(&rdtgroup_mutex);
> +
> idx = resctrl_arch_rmid_idx_encode(entry->closid, entry->rmid);
>
> entry->busy = 0;
> @@ -423,10 +441,13 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
> }
> put_cpu();
>
> - if (entry->busy)
> + if (entry->busy) {
> rmid_limbo_count++;
> - else
> + if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
> + closid_num_dirty_rmid[entry->closid]++;
> + } else {
> list_add_tail(&entry->list, &rmid_free_lru);
> + }
> }
>
> void free_rmid(u32 closid, u32 rmid)
> @@ -792,13 +813,33 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
> static int dom_data_init(struct rdt_resource *r)
> {
> u32 idx_limit = resctrl_arch_system_num_rmid_idx();
> + u32 num_closid = resctrl_arch_get_num_closid(r);
> struct rmid_entry *entry = NULL;
> + int err = 0, i;
> u32 idx;
> - int i;
> +
> + mutex_lock(&rdtgroup_mutex);
> + if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
> + u32 *tmp;
> +
> + tmp = kcalloc(num_closid, sizeof(*tmp), GFP_KERNEL);
> + if (!tmp) {
> + err = -ENOMEM;
> + goto out_unlock;
> + }
> +
> + closid_num_dirty_rmid = tmp;
> + }
>
> rmid_ptrs = kcalloc(idx_limit, sizeof(struct rmid_entry), GFP_KERNEL);
> - if (!rmid_ptrs)
> - return -ENOMEM;
> + if (!rmid_ptrs) {
> + if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
> + kfree(closid_num_dirty_rmid);
> + closid_num_dirty_rmid = NULL;
> + }
> + err = -ENOMEM;
> + goto out_unlock;
> + }
>
> for (i = 0; i < idx_limit; i++) {
> entry = &rmid_ptrs[i];
> @@ -818,13 +859,21 @@ static int dom_data_init(struct rdt_resource *r)
> entry = __rmid_entry(idx);
> list_del(&entry->list);
>
> - return 0;
> +out_unlock:
> + mutex_unlock(&rdtgroup_mutex);
> +
> + return err;
> }
>
> static void __exit dom_data_exit(struct rdt_resource *r)
> {
> mutex_lock(&rdtgroup_mutex);
>
> + if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
> + kfree(closid_num_dirty_rmid);
> + closid_num_dirty_rmid = NULL;
> + }
> +
> kfree(rmid_ptrs);
> rmid_ptrs = NULL;
>
--
Thanks
Babu Moger
On 12/15/23 11:43, James Morse wrote:
> Intel is blessed with an abundance of monitors, one per RMID, that can be
> read from any CPU in the domain. MPAMs monitors reside in the MMIO MSC,
> the number implemented is up to the manufacturer. This means when there are
> fewer monitors than needed, they need to be allocated and freed.
>
> MPAM's CSU monitors are used to back the 'llc_occupancy' monitor file. The
> CSU counter is allowed to return 'not ready' for a small number of
> micro-seconds after programming. To allow one CSU hardware monitor to be
> used for multiple control or monitor groups, the CPU accessing the
> monitor needs to be able to block when configuring and reading the
> counter.
>
> Worse, the domain may be broken up into slices, and the MMIO accesses
> for each slice may need performing from different CPUs.
>
> These two details mean MPAMs monitor code needs to be able to sleep, and
> IPI another CPU in the domain to read from a resource that has been sliced.
>
> mon_event_read() already invokes mon_event_count() via IPI, which means
> this isn't possible. On systems using nohz-full, some CPUs need to be
> interrupted to run kernel work as they otherwise stay in user-space
> running realtime workloads. Interrupting these CPUs should be avoided,
> and scheduling work on them may never complete.
>
> Change mon_event_read() to pick a housekeeping CPU, (one that is not using
> nohz_full) and schedule mon_event_count() and wait. If all the CPUs
> in a domain are using nohz-full, then an IPI is used as the fallback.
>
> This function is only used in response to a user-space filesystem request
> (not the timing sensitive overflow code).
>
> This allows MPAM to hide the slice behaviour from resctrl, and to keep
> the monitor-allocation in monitor.c. When the IPI fallback is used on
> machines where MPAM needs to make an access on multiple CPUs, the counter
> read will always fail.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Shaopeng Tan <[email protected]>
> Tested-by: Peter Newman <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Shaopeng Tan <[email protected]>
> Reviewed-by: Peter Newman <[email protected]>
> Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
> ---
> Changes since v2:
> * Use cpumask_any_housekeeping() and fallback to an IPI if needed.
>
> Changes since v3:
> * Actually include the IPI fallback code.
>
> Changes since v4:
> * Tinkered with existing capitalisation.
>
> Changes since v5:
> * Added a newline.
>
> Changes since v6:
> * Moved lockdep annotations to a later patch.
> ---
> arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 26 +++++++++++++++++++++--
> arch/x86/kernel/cpu/resctrl/monitor.c | 2 +-
> 2 files changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> index beccb0e87ba7..d07f99245851 100644
> --- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> +++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> @@ -19,6 +19,8 @@
> #include <linux/kernfs.h>
> #include <linux/seq_file.h>
> #include <linux/slab.h>
> +#include <linux/tick.h>
> +
> #include "internal.h"
>
> /*
> @@ -522,12 +524,21 @@ int rdtgroup_schemata_show(struct kernfs_open_file *of,
> return ret;
> }
>
> +static int smp_mon_event_count(void *arg)
> +{
> + mon_event_count(arg);
> +
> + return 0;
> +}
> +
> void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
> struct rdt_domain *d, struct rdtgroup *rdtgrp,
> int evtid, int first)
> {
> + int cpu;
> +
> /*
> - * setup the parameters to send to the IPI to read the data.
> + * Setup the parameters to pass to mon_event_count() to read the data.
> */
> rr->rgrp = rdtgrp;
> rr->evtid = evtid;
> @@ -536,7 +547,18 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
> rr->val = 0;
> rr->first = first;
>
> - smp_call_function_any(&d->cpu_mask, mon_event_count, rr, 1);
> + cpu = cpumask_any_housekeeping(&d->cpu_mask);
> +
> + /*
> + * cpumask_any_housekeeping() prefers housekeeping CPUs, but
> + * are all the CPUs nohz_full? If yes, pick a CPU to IPI.
> + * MPAM's resctrl_arch_rmid_read() is unable to read the
> + * counters on some platforms if its called in irq context.
> + */
> + if (tick_nohz_full_cpu(cpu))
> + smp_call_function_any(&d->cpu_mask, mon_event_count, rr, 1);
> + else
> + smp_call_on_cpu(cpu, smp_mon_event_count, rr, false);
> }
>
> int rdtgroup_mondata_show(struct seq_file *m, void *arg)
> diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
> index 8737a9d6caef..7e81268137b0 100644
> --- a/arch/x86/kernel/cpu/resctrl/monitor.c
> +++ b/arch/x86/kernel/cpu/resctrl/monitor.c
> @@ -588,7 +588,7 @@ static void mbm_bw_count(u32 closid, u32 rmid, struct rmid_read *rr)
> }
>
> /*
> - * This is called via IPI to read the CQM/MBM counters
> + * This is scheduled by mon_event_read() to read the CQM/MBM counters
> * on a domain.
> */
> void mon_event_count(void *info)
--
Thanks
Babu Moger
On 12/15/23 11:43, James Morse wrote:
> MPAM's cache occupancy counters can take a little while to settle once
> the monitor has been configured. The maximum settling time is described
> to the driver via a firmware table. The value could be large enough
> that it makes sense to sleep. To avoid exposing this to resctrl, it
> should be hidden behind MPAM's resctrl_arch_rmid_read().
>
> resctrl_arch_rmid_read() may be called via IPI meaning it is unable
> to sleep. In this case resctrl_arch_rmid_read() should return an error
> if it needs to sleep. This will only affect MPAM platforms where
> the cache occupancy counter isn't available immediately, nohz_full is
> in use, and there are no housekeeping CPUs in the necessary domain.
>
> There are three callers of resctrl_arch_rmid_read():
> __mon_event_count() and __check_limbo() are both called from a
> non-migrateable context. mon_event_read() invokes __mon_event_count()
> using smp_call_on_cpu(), which adds work to the target CPUs workqueue.
> rdtgroup_mutex() is held, meaning this cannot race with the resctrl
> cpuhp callback. __check_limbo() is invoked via schedule_delayed_work_on()
> also adds work to a per-cpu workqueue.
>
> The remaining call is add_rmid_to_limbo() which is called in response
> to a user-space syscall that frees an RMID. This opportunistically
> reads the LLC occupancy counter on the current domain to see if the
> RMID is over the dirty threshold. This has to disable preemption to
> avoid reading the wrong domain's value. Disabling pre-emption here
> prevents resctrl_arch_rmid_read() from sleeping.
>
> add_rmid_to_limbo() walks each domain, but only reads the counter
> on one domain. If the system has more than one domain, the RMID will
> always be added to the limbo list. If the RMIDs usage was not over the
> threshold, it will be removed from the list when __check_limbo() runs.
> Make this the default behaviour. Free RMIDs are always added to the
> limbo list for each domain.
>
> The user visible effect of this is that a clean RMID is not available
> for re-allocation immediately after 'rmdir()' completes, this behaviour
> was never portable as it never happened on a machine with multiple
> domains.
>
> Removing this path allows resctrl_arch_rmid_read() to sleep if its called
> with interrupts unmasked. Document this is the expected behaviour, and
> add a might_sleep() annotation to catch changes that won't work on arm64.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Shaopeng Tan <[email protected]>
> Tested-by: Peter Newman <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Shaopeng Tan <[email protected]>
> Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
> ---
> The previous version allowed resctrl_arch_rmid_read() to be called on the
> wrong CPUs, but now that this needs to take nohz_full and housekeeping into
> account, its too complex.
>
> Changes since v3:
> * Removed error handling for smp_call_function_any(), this can't race
> with the cpuhp callbacks as both hold rdtgroup_mutex.
> * Switched to the alternative of removing the counter read, this simplifies
> things dramatically.
>
> Changes since v4:
> * Messed with capitalisation.
> * Removed some dead code now that entry->busy will never be zero in
> add_rmid_to_limbo().
> * Rephrased the comment above resctrl_arch_rmid_read_context_check().
>
> Changes since v5:
> * Really rephrased the comment above resctrl_arch_rmid_read_context_check().
> ---
> arch/x86/kernel/cpu/resctrl/monitor.c | 25 +++++--------------------
> include/linux/resctrl.h | 23 ++++++++++++++++++++++-
> 2 files changed, 27 insertions(+), 21 deletions(-)
>
> diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
> index 7e81268137b0..2785a2a4ea33 100644
> --- a/arch/x86/kernel/cpu/resctrl/monitor.c
> +++ b/arch/x86/kernel/cpu/resctrl/monitor.c
> @@ -277,6 +277,8 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> u64 msr_val, chunks;
> int ret;
>
> + resctrl_arch_rmid_read_context_check();
> +
> if (!cpumask_test_cpu(smp_processor_id(), &d->cpu_mask))
> return -EINVAL;
>
> @@ -455,8 +457,6 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
> {
> struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
> struct rdt_domain *d;
> - int cpu, err;
> - u64 val = 0;
> u32 idx;
>
> lockdep_assert_held(&rdtgroup_mutex);
> @@ -464,17 +464,7 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
> idx = resctrl_arch_rmid_idx_encode(entry->closid, entry->rmid);
>
> entry->busy = 0;
> - cpu = get_cpu();
> list_for_each_entry(d, &r->domains, list) {
> - if (cpumask_test_cpu(cpu, &d->cpu_mask)) {
> - err = resctrl_arch_rmid_read(r, d, entry->closid,
> - entry->rmid,
> - QOS_L3_OCCUP_EVENT_ID,
> - &val);
> - if (err || val <= resctrl_rmid_realloc_threshold)
> - continue;
> - }
> -
> /*
> * For the first limbo RMID in the domain,
> * setup up the limbo worker.
> @@ -484,15 +474,10 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
> set_bit(idx, d->rmid_busy_llc);
> entry->busy++;
> }
> - put_cpu();
>
> - if (entry->busy) {
> - rmid_limbo_count++;
> - if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
> - closid_num_dirty_rmid[entry->closid]++;
> - } else {
> - list_add_tail(&entry->list, &rmid_free_lru);
> - }
> + rmid_limbo_count++;
> + if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
> + closid_num_dirty_rmid[entry->closid]++;
> }
>
> void free_rmid(u32 closid, u32 rmid)
> diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
> index bd4ec22b5a96..8649fc84aac2 100644
> --- a/include/linux/resctrl.h
> +++ b/include/linux/resctrl.h
> @@ -236,7 +236,12 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
> * @eventid: eventid to read, e.g. L3 occupancy.
> * @val: result of the counter read in bytes.
> *
> - * Call from process context on a CPU that belongs to domain @d.
> + * Some architectures need to sleep when first programming some of the counters.
> + * (specifically: arm64's MPAM cache occupancy counters can return 'not ready'
> + * for a short period of time). Call from a non-migrateable process context on
> + * a CPU that belongs to domain @d. e.g. use smp_call_on_cpu() or
> + * schedule_work_on(). This function can be called with interrupts masked,
> + * e.g. using smp_call_function_any(), but may consistently return an error.
> *
> * Return:
> * 0 on success, or -EIO, -EINVAL etc on error.
> @@ -245,6 +250,22 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> u32 closid, u32 rmid, enum resctrl_event_id eventid,
> u64 *val);
>
> +/**
> + * resctrl_arch_rmid_read_context_check() - warn about invalid contexts
> + *
> + * When built with CONFIG_DEBUG_ATOMIC_SLEEP generate a warning when
> + * resctrl_arch_rmid_read() is called with preemption disabled.
> + *
> + * The contract with resctrl_arch_rmid_read() is that if interrupts
> + * are unmasked, it can sleep. This allows NOHZ_FULL systems to use an
> + * IPI, (and fail if the call needed to sleep), while most of the time
> + * the work is scheduled, allowing the call to sleep.
> + */
> +static inline void resctrl_arch_rmid_read_context_check(void)
> +{
> + if (!irqs_disabled())
> + might_sleep();
> +}
>
> /**
> * resctrl_arch_reset_rmid() - Reset any private state associated with rmid
--
Thanks
Babu Moger
On 12/15/23 11:43, James Morse wrote:
> resctrl reads rdt_alloc_capable or rdt_mon_capable to determine
> whether any of the resources support the corresponding features.
> resctrl also uses the static-keys that affect the architecture's
> context-switch code to determine the same thing.
>
> This forces another architecture to have the same static-keys.
>
> As the static-key is enabled based on the capable flag, and none of
> the filesystem uses of these are in the scheduler path, move the
> capable flags behind helpers, and use these in the filesystem
> code instead of the static-key.
>
> After this change, only the architecture code manages and uses
> the static-keys to ensure __resctrl_sched_in() does not need
> runtime checks.
>
> This avoids multiple architectures having to define the same
> static-keys.
>
> Cases where the static-key implicitly tested if the resctrl
> filesystem was mounted all have an explicit check added by a
> previous patch.
>
> Signed-off-by: James Morse <[email protected]>
> Tested-by: Shaopeng Tan <[email protected]>
> Tested-by: Peter Newman <[email protected]>
> Tested-by: Babu Moger <[email protected]>
> Reviewed-by: Shaopeng Tan <[email protected]>
> Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Babu Moger <[email protected]>
> ---
> Changes since v1:
> * Added missing conversion in mkdir_rdt_prepare_rmid_free()
>
> Changes since v3:
> * Expanded the commit message.
>
> Change since v7:
> * Added a few missing resctrl_arch_mon_capable() that crept in during
> a rebase.
> ---
> arch/x86/include/asm/resctrl.h | 13 ++++++++
> arch/x86/kernel/cpu/resctrl/internal.h | 2 --
> arch/x86/kernel/cpu/resctrl/monitor.c | 4 +--
> arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 6 ++--
> arch/x86/kernel/cpu/resctrl/rdtgroup.c | 38 +++++++++++------------
> 5 files changed, 37 insertions(+), 26 deletions(-)
>
> diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
> index b74aa34dc9e8..12dbd2588ca7 100644
> --- a/arch/x86/include/asm/resctrl.h
> +++ b/arch/x86/include/asm/resctrl.h
> @@ -38,10 +38,18 @@ struct resctrl_pqr_state {
>
> DECLARE_PER_CPU(struct resctrl_pqr_state, pqr_state);
>
> +extern bool rdt_alloc_capable;
> +extern bool rdt_mon_capable;
> +
> DECLARE_STATIC_KEY_FALSE(rdt_enable_key);
> DECLARE_STATIC_KEY_FALSE(rdt_alloc_enable_key);
> DECLARE_STATIC_KEY_FALSE(rdt_mon_enable_key);
>
> +static inline bool resctrl_arch_alloc_capable(void)
> +{
> + return rdt_alloc_capable;
> +}
> +
> static inline void resctrl_arch_enable_alloc(void)
> {
> static_branch_enable_cpuslocked(&rdt_alloc_enable_key);
> @@ -54,6 +62,11 @@ static inline void resctrl_arch_disable_alloc(void)
> static_branch_dec_cpuslocked(&rdt_enable_key);
> }
>
> +static inline bool resctrl_arch_mon_capable(void)
> +{
> + return rdt_mon_capable;
> +}
> +
> static inline void resctrl_arch_enable_mon(void)
> {
> static_branch_enable_cpuslocked(&rdt_mon_enable_key);
> diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
> index 68b9beed8e42..c4c1e1909058 100644
> --- a/arch/x86/kernel/cpu/resctrl/internal.h
> +++ b/arch/x86/kernel/cpu/resctrl/internal.h
> @@ -138,8 +138,6 @@ struct rmid_read {
> void *arch_mon_ctx;
> };
>
> -extern bool rdt_alloc_capable;
> -extern bool rdt_mon_capable;
> extern unsigned int rdt_mon_features;
> extern struct list_head resctrl_schema_all;
> extern bool resctrl_mounted;
> diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
> index e3e42736fb22..95020b113ee5 100644
> --- a/arch/x86/kernel/cpu/resctrl/monitor.c
> +++ b/arch/x86/kernel/cpu/resctrl/monitor.c
> @@ -839,7 +839,7 @@ void mbm_handle_overflow(struct work_struct *work)
> * If the filesystem has been unmounted this work no longer needs to
> * run.
> */
> - if (!resctrl_mounted || !static_branch_likely(&rdt_mon_enable_key))
> + if (!resctrl_mounted || !resctrl_arch_mon_capable())
> goto out_unlock;
>
> r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
> @@ -876,7 +876,7 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
> * When a domain comes online there is no guarantee the filesystem is
> * mounted. If not, there is no need to catch counter overflow.
> */
> - if (!resctrl_mounted || !static_branch_likely(&rdt_mon_enable_key))
> + if (!resctrl_mounted || !resctrl_arch_mon_capable())
> return;
> cpu = cpumask_any_housekeeping(&dom->cpu_mask);
> dom->mbm_work_cpu = cpu;
> diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
> index d8f44113ed1f..8056bed033cc 100644
> --- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
> +++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
> @@ -581,7 +581,7 @@ static int rdtgroup_locksetup_user_restrict(struct rdtgroup *rdtgrp)
> if (ret)
> goto err_cpus;
>
> - if (rdt_mon_capable) {
> + if (resctrl_arch_mon_capable()) {
> ret = rdtgroup_kn_mode_restrict(rdtgrp, "mon_groups");
> if (ret)
> goto err_cpus_list;
> @@ -628,7 +628,7 @@ static int rdtgroup_locksetup_user_restore(struct rdtgroup *rdtgrp)
> if (ret)
> goto err_cpus;
>
> - if (rdt_mon_capable) {
> + if (resctrl_arch_mon_capable()) {
> ret = rdtgroup_kn_mode_restore(rdtgrp, "mon_groups", 0777);
> if (ret)
> goto err_cpus_list;
> @@ -776,7 +776,7 @@ int rdtgroup_locksetup_exit(struct rdtgroup *rdtgrp)
> {
> int ret;
>
> - if (rdt_mon_capable) {
> + if (resctrl_arch_mon_capable()) {
> ret = alloc_rmid(rdtgrp->closid);
> if (ret < 0) {
> rdt_last_cmd_puts("Out of RMIDs\n");
> diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> index 74a8494a0c91..89aef67588c0 100644
> --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> @@ -641,13 +641,13 @@ static int __rdtgroup_move_task(struct task_struct *tsk,
>
> static bool is_closid_match(struct task_struct *t, struct rdtgroup *r)
> {
> - return (rdt_alloc_capable && (r->type == RDTCTRL_GROUP) &&
> + return (resctrl_arch_alloc_capable() && (r->type == RDTCTRL_GROUP) &&
> resctrl_arch_match_closid(t, r->closid));
> }
>
> static bool is_rmid_match(struct task_struct *t, struct rdtgroup *r)
> {
> - return (rdt_mon_capable && (r->type == RDTMON_GROUP) &&
> + return (resctrl_arch_mon_capable() && (r->type == RDTMON_GROUP) &&
> resctrl_arch_match_rmid(t, r->mon.parent->closid,
> r->mon.rmid));
> }
> @@ -2637,7 +2637,7 @@ static int rdt_get_tree(struct fs_context *fc)
>
> closid_init();
>
> - if (rdt_mon_capable)
> + if (resctrl_arch_mon_capable())
> flags |= RFTYPE_MON;
>
> ret = rdtgroup_add_files(rdtgroup_default.kn, flags);
> @@ -2650,7 +2650,7 @@ static int rdt_get_tree(struct fs_context *fc)
> if (ret < 0)
> goto out_schemata_free;
>
> - if (rdt_mon_capable) {
> + if (resctrl_arch_mon_capable()) {
> ret = mongroup_create_dir(rdtgroup_default.kn,
> &rdtgroup_default, "mon_groups",
> &kn_mongrp);
> @@ -2672,12 +2672,12 @@ static int rdt_get_tree(struct fs_context *fc)
> if (ret < 0)
> goto out_psl;
>
> - if (rdt_alloc_capable)
> + if (resctrl_arch_alloc_capable())
> resctrl_arch_enable_alloc();
> - if (rdt_mon_capable)
> + if (resctrl_arch_mon_capable())
> resctrl_arch_enable_mon();
>
> - if (rdt_alloc_capable || rdt_mon_capable)
> + if (resctrl_arch_alloc_capable() || resctrl_arch_mon_capable())
> resctrl_mounted = true;
>
> if (is_mbm_enabled()) {
> @@ -2691,10 +2691,10 @@ static int rdt_get_tree(struct fs_context *fc)
> out_psl:
> rdt_pseudo_lock_release();
> out_mondata:
> - if (rdt_mon_capable)
> + if (resctrl_arch_mon_capable())
> kernfs_remove(kn_mondata);
> out_mongrp:
> - if (rdt_mon_capable)
> + if (resctrl_arch_mon_capable())
> kernfs_remove(kn_mongrp);
> out_info:
> kernfs_remove(kn_info);
> @@ -2949,9 +2949,9 @@ static void rdt_kill_sb(struct super_block *sb)
> rdtgroup_default.mode = RDT_MODE_SHAREABLE;
> schemata_list_destroy();
> rdtgroup_destroy_root();
> - if (rdt_alloc_capable)
> + if (resctrl_arch_alloc_capable())
> resctrl_arch_disable_alloc();
> - if (rdt_mon_capable)
> + if (resctrl_arch_mon_capable())
> resctrl_arch_disable_mon();
> resctrl_mounted = false;
> kernfs_kill_sb(sb);
> @@ -3331,7 +3331,7 @@ static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
> {
> int ret;
>
> - if (!rdt_mon_capable)
> + if (!resctrl_arch_mon_capable())
> return 0;
>
> ret = alloc_rmid(rdtgrp->closid);
> @@ -3353,7 +3353,7 @@ static int mkdir_rdt_prepare_rmid_alloc(struct rdtgroup *rdtgrp)
>
> static void mkdir_rdt_prepare_rmid_free(struct rdtgroup *rgrp)
> {
> - if (rdt_mon_capable)
> + if (resctrl_arch_mon_capable())
> free_rmid(rgrp->closid, rgrp->mon.rmid);
> }
>
> @@ -3417,7 +3417,7 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
>
> if (rtype == RDTCTRL_GROUP) {
> files = RFTYPE_BASE | RFTYPE_CTRL;
> - if (rdt_mon_capable)
> + if (resctrl_arch_mon_capable())
> files |= RFTYPE_MON;
> } else {
> files = RFTYPE_BASE | RFTYPE_MON;
> @@ -3526,7 +3526,7 @@ static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn,
>
> list_add(&rdtgrp->rdtgroup_list, &rdt_all_groups);
>
> - if (rdt_mon_capable) {
> + if (resctrl_arch_mon_capable()) {
> /*
> * Create an empty mon_groups directory to hold the subset
> * of tasks and cpus to monitor.
> @@ -3581,14 +3581,14 @@ static int rdtgroup_mkdir(struct kernfs_node *parent_kn, const char *name,
> * allocation is supported, add a control and monitoring
> * subdirectory
> */
> - if (rdt_alloc_capable && parent_kn == rdtgroup_default.kn)
> + if (resctrl_arch_alloc_capable() && parent_kn == rdtgroup_default.kn)
> return rdtgroup_mkdir_ctrl_mon(parent_kn, name, mode);
>
> /*
> * If RDT monitoring is supported and the parent directory is a valid
> * "mon_groups" directory, add a monitoring subdirectory.
> */
> - if (rdt_mon_capable && is_mon_groups(parent_kn, name))
> + if (resctrl_arch_mon_capable() && is_mon_groups(parent_kn, name))
> return rdtgroup_mkdir_mon(parent_kn, name, mode);
>
> return -EPERM;
> @@ -3923,7 +3923,7 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
> * If resctrl is mounted, remove all the
> * per domain monitor data directories.
> */
> - if (resctrl_mounted && static_branch_unlikely(&rdt_mon_enable_key))
> + if (resctrl_mounted && resctrl_arch_mon_capable())
> rmdir_mondata_subdir_allrdtgrp(r, d->id);
>
> if (is_mbm_enabled())
> @@ -4006,7 +4006,7 @@ int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
> * by rdt_get_tree() calling mkdir_mondata_all().
> * If resctrl is mounted, add per domain monitor data directories.
> */
> - if (resctrl_mounted && static_branch_unlikely(&rdt_mon_enable_key))
> + if (resctrl_mounted && resctrl_arch_mon_capable())
> mkdir_mondata_subdir_allrdtgrp(r, d);
>
> return 0;
--
Thanks
Babu Moger
Hi James,
On Fri, Dec 15, 2023 at 9:44 AM James Morse <[email protected]> wrote:
> void free_rmid(u32 closid, u32 rmid)
> @@ -792,13 +813,33 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
> static int dom_data_init(struct rdt_resource *r)
> {
> u32 idx_limit = resctrl_arch_system_num_rmid_idx();
> + u32 num_closid = resctrl_arch_get_num_closid(r);
Which resource is this again? Surely the one with the smallest number
of CLOSIDs?
It's not much harm if the array is bigger than it needs to be, but
I've become curious about how The Monitoring Resource is used in the
code when there are later changes[1] which would cause this function
to be called on RDT_RESOURCE_L3, RDT_RESOURCE_MBA, or both.
Given that we have hardware with event counters residing at different
levels of the topology and possibly being associated with different
rdt_resources, more attention needs to be paid to how these parameters
are used in code related to monitoring.
-Peter
[1] https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/commit/drivers/platform/mpam/mpam_resctrl.c?h=mpam/snapshot/v6.7-rc2&id=a0ab3a6c26002
Hi Peter,
On 04/01/2024 19:13, Peter Newman wrote:
> On Fri, Dec 15, 2023 at 9:44 AM James Morse <[email protected]> wrote:
>> void free_rmid(u32 closid, u32 rmid)
>> @@ -792,13 +813,33 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
>> static int dom_data_init(struct rdt_resource *r)
>> {
>> u32 idx_limit = resctrl_arch_system_num_rmid_idx();
>> + u32 num_closid = resctrl_arch_get_num_closid(r);
> Which resource is this again? Surely the one with the smallest number
> of CLOSIDs?
Today it's implicitly L3 because that is the only one resctrl supports monitoring on
> It's not much harm if the array is bigger than it needs to be, but
Heh, this use of this variable is behind those IS_ENABLED(), which means it gets removed
unless you are on an MPAM system. MPAM always has to sanitise these fields as not all the
hardware is exposed to resctrl.
(e.g. L3 and MB might support 16 CLOSID, but if there is an invisible system-cache in
between them that only supports 8 CLOSID, the system-wide value has to be 8, regardless of
what the hardware supports.)
The MPAM driver finds the system wide value here:
https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/tree/drivers/platform/mpam/mpam_devices.c?h=mpam/snapshot/v6.7-rc2#n757
And regardless of which resource you select, returns that value here:
https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/tree/drivers/platform/mpam/mpam_resctrl.c?h=mpam/snapshot/v6.7-rc2#n128
On x86 the helper returns the hardware num CLOSID so that the resctrl sanitisation does
the right thing.
I'll add a comment that this may over-allocate if the architecture isn't pre-sanitising
this field:
| /*
| * If the architecture hasn't provided a sanitised value here,
| * this may result in larger arrays than necessary. Resctrl will
| * use a smaller system wide value based on the resources in
| * use.
| */
> I've become curious about how The Monitoring Resource is used in the
> code when there are later changes[1] which would cause this function
> to be called on RDT_RESOURCE_L3, RDT_RESOURCE_MBA, or both.
I need to digest Tony's series. Today the event names all have L3 in them - the MPAM
driver is ignoring both this and the resources, and relying on heuristics to pick
something to back these counters with. Something is better than nothing,.
I agree it can be improved as resctrl allows more things to be exposed.
> Given that we have hardware with event counters residing at different
> levels of the topology and possibly being associated with different
> rdt_resources, more attention needs to be paid to how these parameters
> are used in code related to monitoring.
Certainly there are likely to be weirdness in what the MPAM driver picks here. Those
patches are marked untested for a reason! I have nothing I can test the bandwidth counters on.
My intention here is that 'things that look like a Xeon' should behave equivalently as far
as resctrl can see. That gets any existing software working. Beyond that we can talk about
extending what we have to better cover the hardware people have built.
I'm coming to the conclusion that results vary depending on {ingress,egress} of {L3, SLC,
Memory-Side-Cache, Memory-Controller} - even when only one is implemented, and that hiding
this in resctrl isn't helpful. Using perf's platform-specific json files to identify
counters may be a better approach.
Thanks,
James
Hi Thomas,
On 15/12/2023 20:31, Thomas Gleixner wrote:
> On Fri, Dec 15 2023 at 17:43, James Morse wrote:
>> tick_nohz_full_mask lists the CPUs that are nohz_full. This is only
>> needed when CONFIG_NO_HZ_FULL is defined. tick_nohz_full_cpu() allows
>> a specific CPU to be tested against the mask, and evaluates to false
>> when CONFIG_NO_HZ_FULL is not defined.
>>
>> The resctrl code needs to pick a CPU to run some work on, a new helper
>> prefers housekeeping CPUs by examining the tick_nohz_full_mask. Hiding
>> the declaration behind #ifdef CONFIG_NO_HZ_FULL forces all the users to
>> be behind an ifdef too.
>>
>> Move the tick_nohz_full_mask declaration, this lets callers drop the
>> ifdef, and guard access to tick_nohz_full_mask with IS_ENABLED() or
>> something like tick_nohz_full_cpu().
>>
>> The definition does not need to be moved as any callers should be
>> removed at compile time unless CONFIG_NO_HZ_FULL is defined.
> I can pick that up separately, but I'm fine when it goes with the
> resctrl lot. For that case:
> Reviewed-by: Thomas Gleixner <[email protected]>
Thanks!
James
Hi Reinette,
On 16/12/2023 04:58, Reinette Chatre wrote:
> On 12/15/2023 9:43 AM, James Morse wrote:
>> x86 systems identify traffic using the CLOSID and RMID. The CLOSID is
>> used to lookup the control policy, the RMID is used for monitoring. For
>> x86 these are independent numbers.
>> Arm's MPAM has equivalent features PARTID and PMG, where the PARTID is
>> used to lookup the control policy. The PMG in contrast is a small number
>> of bits that are used to subdivide PARTID when monitoring. The
>> cache-occupancy monitors require the PARTID to be specified when
>> monitoring.
>>
>> This means MPAM's PMG field is not unique. There are multiple PMG-0, one
>> per allocated CLOSID/PARTID. If PMG is treated as equivalent to RMID, it
>> cannot be allocated as an independent number. Bitmaps like rmid_busy_llc
>> need to be sized by the number of unique entries for this resource.
>>
>> Treat the combined CLOSID and RMID as an index, and provide architecture
>> helpers to pack and unpack an index. This makes the MPAM values unique.
>> The domain's rmid_busy_llc and rmid_ptrs[] are then sized by index, as
>> are domain mbm_local[] and mbm_total[].
>>
>> x86 can ignore the CLOSID field when packing and unpacking an index, and
>> report as many indexes as RMID.
> Reviewed-by: Reinette Chatre <[email protected]>
Thanks!
James
Hi Babu,
On 03/01/2024 19:43, Moger, Babu wrote:
> On 12/15/23 11:43, James Morse wrote:
>> Intel is blessed with an abundance of monitors, one per RMID, that can be
>> read from any CPU in the domain. MPAMs monitors reside in the MMIO MSC,
>> the number implemented is up to the manufacturer. This means when there are
>> fewer monitors than needed, they need to be allocated and freed.
>>
>> MPAM's CSU monitors are used to back the 'llc_occupancy' monitor file. The
>> CSU counter is allowed to return 'not ready' for a small number of
>> micro-seconds after programming. To allow one CSU hardware monitor to be
>> used for multiple control or monitor groups, the CPU accessing the
>> monitor needs to be able to block when configuring and reading the
>> counter.
>>
>> Worse, the domain may be broken up into slices, and the MMIO accesses
>> for each slice may need performing from different CPUs.
>>
>> These two details mean MPAMs monitor code needs to be able to sleep, and
>> IPI another CPU in the domain to read from a resource that has been sliced.
>>
>> mon_event_read() already invokes mon_event_count() via IPI, which means
>> this isn't possible. On systems using nohz-full, some CPUs need to be
>> interrupted to run kernel work as they otherwise stay in user-space
>> running realtime workloads. Interrupting these CPUs should be avoided,
>> and scheduling work on them may never complete.
>>
>> Change mon_event_read() to pick a housekeeping CPU, (one that is not using
>> nohz_full) and schedule mon_event_count() and wait. If all the CPUs
>> in a domain are using nohz-full, then an IPI is used as the fallback.
>>
>> This function is only used in response to a user-space filesystem request
>> (not the timing sensitive overflow code).
>>
>> This allows MPAM to hide the slice behaviour from resctrl, and to keep
>> the monitor-allocation in monitor.c. When the IPI fallback is used on
>> machines where MPAM needs to make an access on multiple CPUs, the counter
>> read will always fail.
> Reviewed-by: Babu Moger <[email protected]>
Thanks!
James
Hi Babu,
On 03/01/2024 19:42, Moger, Babu wrote:
> Hi James,
> Tested the series. Looks good.
Thanks - this was on an AMD machine right? (I've not got access to one of those, so I'm
always nervous about something I may have missed!)
Thanks,
James
> Thanks
> Babu
>
> On 12/15/23 11:43, James Morse wrote:
>> Some of the changes this version are:
>> * Fixed a bounds checking bug in cpumask_any_housekeeping(),
>> * Moved the kfree() of rmid_ptrs[] later,
>>
>> Changes are noted in each patch, I've not added 'no changes' notes
>> if these need double checking anyway. I'll try again next series.
>>
>> ~
>>
>> This series does two things, it changes resctrl to call resctrl_arch_rmid_read()
>> in a way that works for MPAM, and it separates the locking so that the arch code
>> and filesystem code don't have to share a mutex. I tried to split this as two
>> series, but these touch similar call sites, so it would create more work.
>>
>> (What's MPAM? See the cover letter of the first series. [1])
>>
>> On x86 the RMID is an independent number. MPAMs equivalent is PMG, but this
>> isn't an independent number - it extends the PARTID (same as CLOSID) space
>> with bits that aren't used to select the configuration. The monitors can
>> then be told to match specific PMG values, allowing monitor-groups to be
>> created.
>>
>> But, MPAM expects the monitors to always monitor by PARTID. The
>> Cache-storage-utilisation counters can only work this way.
>> (In the MPAM spec not setting the MATCH_PARTID bit is made CONSTRAINED
>> UNPREDICTABLE - which is Arm's term to mean portable software can't rely on
>> this)
>>
>> It gets worse, as some SoCs may have very few PMG bits. I've seen the
>> datasheet for one that has a single bit of PMG space.
>>
>> To be usable, MPAM's counters always need the PARTID and the PMG.
>> For resctrl, this means always making the CLOSID available when the RMID
>> is used.
>>
>> To ensure RMID are always unique, this series combines the CLOSID and RMID
>> into an index, and manages RMID based on that. For x86, the index and RMID
>> would always be the same.
>>
>>
>> Currently the architecture specific code in the cpuhp callbacks takes the
>> rdtgroup_mutex. This means the filesystem code would have to export this
>> lock, resulting in an ill-defined interface between the two, and the possibility
>> of cross-architecture lock-ordering head aches.
>>
>> The second part of this series adds a domain_list_lock to protect writes to the
>> domain list, and protects the domain list with RCU - or cpus_read_lock().
>>
>> Use of RCU is to allow lockless readers of the domain list. To get MPAMs monitors
>> working, its very likely they'll need to be plumbed up to perf. An uncore PMU
>> driver would need to be a lockless reader of the domain list.
>>
>>
>>
>> This series is based on v6.7-rc2, and can be retrieved from:
>> https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/monitors_and_locking/v8
>>
>> Bugs welcome,
>>
>> Thanks,
>>
>> James
>>
>> [1] https://lore.kernel.org/lkml/[email protected]/
>> [v1] https://lore.kernel.org/all/[email protected]/
>> [v2] https://lore.kernel.org/lkml/[email protected]/
>> [v3] https://lore.kernel.org/r/[email protected]/
>> [v4] https://lore.kernel.org/r/[email protected]/
>> [v5] https://lore.kernel.org/lkml/[email protected]/
>> [v6] https://lore.kernel.org/all/[email protected]/
>> [v7] https://lore.kernel.org/r/[email protected]/
>>
>> James Morse (24):
>> tick/nohz: Move tick_nohz_full_mask declaration outside the #ifdef
>> x86/resctrl: kfree() rmid_ptrs from resctrl_exit()
>> x86/resctrl: Create helper for RMID allocation and mondata dir
>> creation
>> x86/resctrl: Move rmid allocation out of mkdir_rdt_prepare()
>> x86/resctrl: Track the closid with the rmid
>> x86/resctrl: Access per-rmid structures by index
>> x86/resctrl: Allow RMID allocation to be scoped by CLOSID
>> x86/resctrl: Track the number of dirty RMID a CLOSID has
>> x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding
>> x86/resctrl: Allocate the cleanest CLOSID by searching
>> closid_num_dirty_rmid
>> x86/resctrl: Move CLOSID/RMID matching and setting to use helpers
>> x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow
>> x86/resctrl: Queue mon_event_read() instead of sending an IPI
>> x86/resctrl: Allow resctrl_arch_rmid_read() to sleep
>> x86/resctrl: Allow arch to allocate memory needed in
>> resctrl_arch_rmid_read()
>> x86/resctrl: Make resctrl_mounted checks explicit
>> x86/resctrl: Move alloc/mon static keys into helpers
>> x86/resctrl: Make rdt_enable_key the arch's decision to switch
>> x86/resctrl: Add helpers for system wide mon/alloc capable
>> x86/resctrl: Add CPU online callback for resctrl work
>> x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but
>> cpu
>> x86/resctrl: Add CPU offline callback for resctrl work
>> x86/resctrl: Move domain helper migration into resctrl_offline_cpu()
>> x86/resctrl: Separate arch and fs resctrl locks
>>
>> arch/x86/include/asm/resctrl.h | 90 +++++
>> arch/x86/kernel/cpu/resctrl/core.c | 102 ++---
>> arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 48 ++-
>> arch/x86/kernel/cpu/resctrl/internal.h | 67 +++-
>> arch/x86/kernel/cpu/resctrl/monitor.c | 449 +++++++++++++++++-----
>> arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 15 +-
>> arch/x86/kernel/cpu/resctrl/rdtgroup.c | 359 ++++++++++++-----
>> include/linux/resctrl.h | 48 ++-
>> include/linux/tick.h | 9 +-
>> 9 files changed, 911 insertions(+), 276 deletions(-)
>>
>
Hi Carl,
On 22/12/2023 22:43, Carl Worth wrote:
> James Morse <[email protected]> writes:
>> This series does two things, it changes resctrl to call resctrl_arch_rmid_read()
>> in a way that works for MPAM, and it separates the locking so that the arch code
>> and filesystem code don't have to share a mutex. I tried to split this as two
>> series, but these touch similar call sites, so it would create more work.
>>
>> (What's MPAM? See the cover letter of the first series. [1])
>
> Thanks, James. This is really useful for us at Ampere since it enables
> the MPAM driver on top of this series.
>
> I've tested this series on an Ampere implementation, by successfully
> using resctrl to configure and exercise MPAM functionality.
Great! Thanks for this.
> I can't
> speak to the effects of the refactor on x86 since I have not tested that
> all.
> For the series:
> Tested-by: Carl Worth <[email protected]>
Thanks, I'll add an "# arm64" on the end of that to preserve your above comment about not
testing this on x86.
Thanks,
James
Hi Reinette,
On 16/12/2023 05:01, Reinette Chatre wrote:
> On 12/15/2023 9:43 AM, James Morse wrote:
>> MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
>> used for different control groups.
>>
>> This means once a CLOSID is allocated, all its monitoring ids may still be
>> dirty, and held in limbo.
>>
>> Instead of allocating the first free CLOSID, on architectures where
>> CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is enabled, search
>> closid_num_dirty_rmid[] to find the cleanest CLOSID.
>>
>> The CLOSID found is returned to closid_alloc() for the free list
>> to be updated.
> (This is an example of me not relying on you dropping my reviewed-by tag
> to take a look at new changes.)
Significant changes. This is only the expected behaviour when significant changes are made
to a patch. This is a comment - and the text of the comment isn't changed.
> This change is unexpected and does not have anything to do with this patch.
> Instead it just seems to undo a change that sneaked into patch #8
> of this series.
Thanks - I was misled by closid_num_dirty_rmid existing before the patch with its name in
the subject. I'll fix this.
Thanks,
James
Hi Reinette,
On 16/12/2023 05:02, Reinette Chatre wrote:
> On 12/15/2023 9:43 AM, James Morse wrote:
>> When a CPU is taken offline resctrl may need to move the overflow or
>> limbo handlers to run on a different CPU.
>>
>> Once the offline callbacks have been split, cqm_setup_limbo_handler()
>> will be called while the CPU that is going offline is still present
>> in the cpu_mask.
>>
>> Pass the CPU to exclude to cqm_setup_limbo_handler() and
>> mbm_setup_overflow_handler(). These functions can use a variant of
>> cpumask_any_but() when selecting the CPU. -1 is used to indicate no CPUs
>> need excluding.
> Reviewed-by: Reinette Chatre <[email protected]>
Thanks!
James
Hi Babu,
On 03/01/2024 19:43, Moger, Babu wrote:
> On 12/15/23 11:43, James Morse wrote:
>> resctrl reads rdt_alloc_capable or rdt_mon_capable to determine
>> whether any of the resources support the corresponding features.
>> resctrl also uses the static-keys that affect the architecture's
>> context-switch code to determine the same thing.
>>
>> This forces another architecture to have the same static-keys.
>>
>> As the static-key is enabled based on the capable flag, and none of
>> the filesystem uses of these are in the scheduler path, move the
>> capable flags behind helpers, and use these in the filesystem
>> code instead of the static-key.
>>
>> After this change, only the architecture code manages and uses
>> the static-keys to ensure __resctrl_sched_in() does not need
>> runtime checks.
>>
>> This avoids multiple architectures having to define the same
>> static-keys.
>>
>> Cases where the static-key implicitly tested if the resctrl
>> filesystem was mounted all have an explicit check added by a
>> previous patch.
> Reviewed-by: Babu Moger <[email protected]>
Thanks!
James
Hi Babu,
On 03/01/2024 19:43, Moger, Babu wrote:
> On 12/15/23 11:43, James Morse wrote:
>> MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
>> used for different control groups.
>>
>> This means once a CLOSID is allocated, all its monitoring ids may still be
>> dirty, and held in limbo.
>>
>> Keep track of the number of RMID held in limbo each CLOSID has. This will
>> allow a future helper to find the 'cleanest' CLOSID when allocating.
>>
>> The array is only needed when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is
>> defined. This will never be the case on x86.
> Reviewed-by: Babu Moger <[email protected]>
Thanks!
James
Hi Reinette,
On 16/12/2023 04:58, Reinette Chatre wrote:
> On 12/15/2023 9:43 AM, James Morse wrote:
>> x86's RMID are independent of the CLOSID. An RMID can be allocated,
>> used and freed without considering the CLOSID.
>>
>> MPAM's equivalent feature is PMG, which is not an independent number,
>> it extends the CLOSID/PARTID space. For MPAM, only PMG-bits worth of
>> 'RMID' can be allocated for a single CLOSID.
>> i.e. if there is 1 bit of PMG space, then each CLOSID can have two
>> monitor groups.
>>
>> To allow resctrl to disambiguate RMID values for different CLOSID,
>> everything in resctrl that keeps an RMID value needs to know the CLOSID
>> too. This will always be ignored on x86.
>
> Reviewed-by: Reinette Chatre <[email protected]>
Thanks!
James
Hi Babu,
On 03/01/2024 19:43, Moger, Babu wrote:
> On 12/15/23 11:43, James Morse wrote:
>> MPAM's cache occupancy counters can take a little while to settle once
>> the monitor has been configured. The maximum settling time is described
>> to the driver via a firmware table. The value could be large enough
>> that it makes sense to sleep. To avoid exposing this to resctrl, it
>> should be hidden behind MPAM's resctrl_arch_rmid_read().
>>
>> resctrl_arch_rmid_read() may be called via IPI meaning it is unable
>> to sleep. In this case resctrl_arch_rmid_read() should return an error
>> if it needs to sleep. This will only affect MPAM platforms where
>> the cache occupancy counter isn't available immediately, nohz_full is
>> in use, and there are no housekeeping CPUs in the necessary domain.
>>
>> There are three callers of resctrl_arch_rmid_read():
>> __mon_event_count() and __check_limbo() are both called from a
>> non-migrateable context. mon_event_read() invokes __mon_event_count()
>> using smp_call_on_cpu(), which adds work to the target CPUs workqueue.
>> rdtgroup_mutex() is held, meaning this cannot race with the resctrl
>> cpuhp callback. __check_limbo() is invoked via schedule_delayed_work_on()
>> also adds work to a per-cpu workqueue.
>>
>> The remaining call is add_rmid_to_limbo() which is called in response
>> to a user-space syscall that frees an RMID. This opportunistically
>> reads the LLC occupancy counter on the current domain to see if the
>> RMID is over the dirty threshold. This has to disable preemption to
>> avoid reading the wrong domain's value. Disabling pre-emption here
>> prevents resctrl_arch_rmid_read() from sleeping.
>>
>> add_rmid_to_limbo() walks each domain, but only reads the counter
>> on one domain. If the system has more than one domain, the RMID will
>> always be added to the limbo list. If the RMIDs usage was not over the
>> threshold, it will be removed from the list when __check_limbo() runs.
>> Make this the default behaviour. Free RMIDs are always added to the
>> limbo list for each domain.
>>
>> The user visible effect of this is that a clean RMID is not available
>> for re-allocation immediately after 'rmdir()' completes, this behaviour
>> was never portable as it never happened on a machine with multiple
>> domains.
>>
>> Removing this path allows resctrl_arch_rmid_read() to sleep if its called
>> with interrupts unmasked. Document this is the expected behaviour, and
>> add a might_sleep() annotation to catch changes that won't work on arm64.
> Reviewed-by: Babu Moger <[email protected]>
Thanks!
James