This is the start of the stable review cycle for the 4.16.13 release.
There are 272 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed May 30 10:01:02 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.13-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.16.13-rc1
Deepak Rawat <[email protected]>
drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful
Randy Dunlap <[email protected]>
kdb: make "mdr" command repeat
Jan Kundrát <[email protected]>
pinctrl: mcp23s08: spi: Fix regmap debugfs entries
Bjorn Andersson <[email protected]>
pinctrl: msm: Use dynamic GPIO numbering
Christophe JAILLET <[email protected]>
regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'
Laurent Pinchart <[email protected]>
ARM: dts: porter: Fix HDMI output routing
Aapo Vienamo <[email protected]>
ARM: dts: imx7d: cl-som-imx7: fix pinctrl_enet
Filip Sadowski <[email protected]>
i40e: Add delay after EMP reset for firmware to recover
Heiner Kallweit <[email protected]>
soc: amlogic: meson-gx-pwrc-vpu: fix error on shutdown when domain is powered off
Charles Keepax <[email protected]>
regmap: Correct comparison in regmap_cached
Peter Rosin <[email protected]>
ARM: dts: at91: tse850: use the correct compatible for the eeprom
Peter Rosin <[email protected]>
ARM: dts: at91: nattis: use the correct compatible for the eeprom
David Ahern <[email protected]>
selftests: Add FIB onlink tests
Sergei Shtylyov <[email protected]>
drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen2
Sergei Shtylyov <[email protected]>
drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen3
Richard Haines <[email protected]>
netlabel: If PF_INET6, check sk_buff ip header version
Dhinakaran Pandiyan <[email protected]>
drm/vblank: Data type fixes for 64-bit vblank sequences.
Prashant Bhole <[email protected]>
selftests/net: fixes psock_fanout eBPF test case
Jiri Olsa <[email protected]>
perf tests: Fix dwarf unwind for stripped binaries
Jiri Olsa <[email protected]>
perf report: Fix memory corruption in --branch-history mode --branch-history
Jiri Olsa <[email protected]>
perf tests: Use arch__compare_symbol_names to compare symbols
Jin Yao <[email protected]>
perf report: Fix wrong jump arrow
Thomas Richter <[email protected]>
perf test: Fix test case inet_pton to accept inlines.
Baoquan He <[email protected]>
x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified
Ørjan Eide <[email protected]>
drm/rockchip: Respect page offset for PRIME mmap calls
Sergei Shtylyov <[email protected]>
soc: renesas: r8a77970-sysc: fix power area parents
Joe Perches <[email protected]>
MIPS: Octeon: Fix logging messages with spurious periods after newlines
Jake Moroni <[email protected]>
dpaa_eth: fix pause capability advertisement logic
Tao <[email protected]>
drm/amd/display: Set vsc pack revision when DPCD revision is >= 1.2
Archit Taneja <[email protected]>
dt-bindings: display: msm/dsi: Fix the PHY regulator supply props
Takeshi Kihara <[email protected]>
pinctrl: sh-pfc: r8a7796: Fix MOD_SEL register pin assignment for SSI pins group
Tejun Heo <[email protected]>
rcu: Call touch_nmi_watchdog() while printing stall warnings
Niklas Cassel <[email protected]>
net: stmmac: call correct function in stmmac_mac_config_rx_queues_routing()
Richard Guy Briggs <[email protected]>
audit: return on memory error to avoid null pointer dereference
Stefan Wahren <[email protected]>
hwrng: bcm2835 - Handle deferred clock properly
Rafael J. Wysocki <[email protected]>
PCMCIA / PM: Avoid noirq suspend aborts during suspend-to-idle
Henry Zhang <[email protected]>
ARM: dts: bcm283x: Fix pin function of JTAG pins
Stefan Wahren <[email protected]>
ARM: dts: bcm283x: Fix probing of bcm2835-i2s
Ladislav Michl <[email protected]>
power: supply: ltc2941-battery-gauge: Fix temperature units
Sergei Shtylyov <[email protected]>
sh_eth: fix TSU init on SH7734/R8A7740
Jacob Keller <[email protected]>
ixgbe: prevent ptp_rx_hang from running when in FILTER_ALL mode
Jan Kara <[email protected]>
fanotify: Avoid lost events due to ENOMEM for unlimited queues
Jan Kara <[email protected]>
udf: Provide saner default for invalid uid / gid
Thomas Vincent-Cross <[email protected]>
PCI: Add function 1 DMA alias quirk for Marvell 88SE9220
Madalin Bucur <[email protected]>
dpaa_eth: fix SG mapping
Viresh Kumar <[email protected]>
cpufreq: Reorder cpufreq_online() error code path
Niklas Cassel <[email protected]>
net: stmmac: ensure that the MSS desc is the last desc to set the own bit
Niklas Cassel <[email protected]>
net: stmmac: ensure that the device has released ownership before reading data
Thomas Falcon <[email protected]>
ibmvnic: Allocate statistics buffers during probe
Monk Liu <[email protected]>
drm/amdgpu: adjust timeout for ib_ring_tests(v2)
Monk Liu <[email protected]>
drm/amdgpu: disable GFX ring and disable PQ wptr in hw_fini
Ravikumar Kattekola <[email protected]>
ARM: dts: dra71-evm: Correct evm_sd regulator max voltage
Laurent Pinchart <[email protected]>
drm: omapdrm: dss: Move initialization code from component bind to probe
Srinivas Kandagatla <[email protected]>
dmaengine: qcom: bam_dma: get num-channels and num-ees from dt
Cornelia Huck <[email protected]>
vfio-ccw: fence off transport mode
Niklas Cassel <[email protected]>
pinctrl: artpec6: dt: add missing pin group uart5nocts
Richard Fitzgerald <[email protected]>
pinctrl: devicetree: Fix dt_to_map_one_config handling of hogs
[email protected] <[email protected]>
hwrng: stm32 - add reset during probe
Alexey Khoroshilov <[email protected]>
watchdog: asm9260_wdt: fix error handling in asm9260_wdt_probe()
Govindarajulu Varadarajan <[email protected]>
enic: enable rq before updating rq descriptors
Yoshihiro Shimoda <[email protected]>
dmaengine: rcar-dmac: Check the done lists in rcar_dmac_chan_get_residue()
Christophe Leroy <[email protected]>
powerpc/mm/slice: Fix hugepage allocation at hint address on 8xx
Christophe Leroy <[email protected]>
powerpc/mm/slice: Enhance for supporting PPC32
Christophe Leroy <[email protected]>
powerpc/mm/slice: create header files dedicated to slices
Christophe Leroy <[email protected]>
powerpc/mm/slice: Remove intermediate bitmap copy
Suman Anna <[email protected]>
ARM: dts: keystone-k2e-clocks: Fix missing unit address separator
Qi Hou <[email protected]>
dmaengine: pl330: fix a race condition in case of threaded irqs
Ming Lei <[email protected]>
block: null_blk: fix 'Invalid parameters' when loading module
Dexuan Cui <[email protected]>
tools: hv: fix compiler warnings about major/target_fname
Emily Deng <[email protected]>
drm/amdgpu: Clean sdma wptr register when only enable wptr polling
Linus Walleij <[email protected]>
drm/bridge: sii902x: Retry status read after DDI I2C
Vivek Gautam <[email protected]>
phy: qcom-qmp: Fix phy pipe clock gating
Takashi Iwai <[email protected]>
ALSA: vmaster: Propagate slave error
Shawn Lin <[email protected]>
phy: rockchip-emmc: retry calpad busy trimming
Ivan Gorinov <[email protected]>
x86/devicetree: Fix device IRQ settings in DT
Ivan Gorinov <[email protected]>
x86/devicetree: Initialize device tree before using it
Andreas Gruenbacher <[email protected]>
gfs2: Fix fallocate chunk size
Bjorn Andersson <[email protected]>
soc: qcom: wcnss_ctrl: Fix increment in NV upload
Ilia Lin <[email protected]>
arm64: dts: qcom: Fix SPI5 config on MSM8996
Kan Liang <[email protected]>
perf/x86/intel: Fix event update for auto-reload
Kan Liang <[email protected]>
perf/x86/intel: Fix large period handling on Broadwell CPUs
Mark Rutland <[email protected]>
efi/arm*: Only register page tables when they exist
Maurizio Lombardi <[email protected]>
cdrom: do not call check_disk_change() inside cdrom_open()
Kan Liang <[email protected]>
perf/x86/intel: Properly save/restore the PMU state in the NMI handler
Guenter Roeck <[email protected]>
hwmon: (pmbus/adm1275) Accept negative page register values
Guenter Roeck <[email protected]>
hwmon: (pmbus/max8688) Accept negative page register values
Eric Anholt <[email protected]>
drm/panel: simple: Fix the bus format for the Ontat panel
Peter Zijlstra <[email protected]>
perf/core: Fix perf_output_read_group()
Pierre Bourdon <[email protected]>
max17042: propagate of_node to power supply device
leilei.lin <[email protected]>
perf/core: Fix installing cgroup events on CPU
Chao Yu <[email protected]>
f2fs: fix to check extent cache in f2fs_drop_extent_tree
Chao Yu <[email protected]>
f2fs: fix to clear CP_TRIMMED_FLAG
Chao Yu <[email protected]>
f2fs: fix to set KEEP_SIZE bit in f2fs_zero_range
Vaibhav Jain <[email protected]>
cxl: Check if PSL data-cache is available before issue flush request
Gao Xiang <[email protected]>
f2fs: flush cp pack except cp pack 2 page at first
Alistair Popple <[email protected]>
powerpc/powernv/npu: Fix deadlock in mmio_invalidate()
Mathieu Malaterre <[email protected]>
powerpc: Add missing prototype for arch_irq_work_raise()
Christophe JAILLET <[email protected]>
drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'
Christophe JAILLET <[email protected]>
drm/meson: Fix some error handling paths in 'meson_drv_bind_master()'
Kamlakant Patel <[email protected]>
ipmi_ssif: Fix kernel panic at msg_done_handler
Milton Miller <[email protected]>
watchdog: aspeed: Fix translation of reset mode to ctrl register
Brian Norris <[email protected]>
watchdog: dw: RMW the control register
Alexey Khoroshilov <[email protected]>
watchdog: sprd_wdt: Fix error handling in sprd_wdt_enable()
Rafael J. Wysocki <[email protected]>
PCI: Restore config space on runtime resume despite being unbound
Sukadev Bhattiprolu <[email protected]>
powerpc/vas: Fix cleanup when VAS is not configured
Mathias Kresin <[email protected]>
MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
Ursula Braun <[email protected]>
net/smc: pay attention to MAX_ORDER for CQ entries
Christophe Jaillet <[email protected]>
spi: bcm-qspi: fIX some error handling paths
Christophe Jaillet <[email protected]>
regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'
John Allen <[email protected]>
ibmvnic: Fix reset return from closed state
Leo Yan <[email protected]>
coresight: Use %px to print pcsr instead of %p
Oded Gabbay <[email protected]>
drm/amdkfd: add missing include of mm.h
Parav Pandit <[email protected]>
IB/core: Honor port_num while resolving GID for IB link layer
Thomas Richter <[email protected]>
perf stat: Fix core dump when flag T is used
Yisheng Xie <[email protected]>
perf top: Fix top.call-graph config option reading
Vitaly Kuznetsov <[email protected]>
KVM: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use
Gregory CLEMENT <[email protected]>
i2c: mv64xxx: Apply errata delay only in standard mode
Arjun Vynipadath <[email protected]>
cxgb4: Fix queue free path of ULD drivers
Seunghun Han <[email protected]>
ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
Coly Li <[email protected]>
bcache: stop dc->writeback_rate_update properly
Bob Moore <[email protected]>
ACPICA: Fix memory leak on unusual memory leak
Erik Schmauss <[email protected]>
ACPICA: Events: add a return on failure from acpi_hw_register_read
Coly Li <[email protected]>
bcache: fix cached_dev->count usage for bch_cache_set_error()
Icenowy Zheng <[email protected]>
dt-bindings: add device tree binding for Allwinner H6 main CCU
Christophe JAILLET <[email protected]>
remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'
Coly Li <[email protected]>
bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
Michael Schmitz <[email protected]>
zorro: Set up z->dev.dma_mask for the DMA API
Honggang Li <[email protected]>
IB/mlx5: Set the default active rate and width to QDR and 4X
Luis R. Rodriguez <[email protected]>
firmware: fix checking for return values for fw_add_devm_name()
Chunyu Hu <[email protected]>
cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path
Yong Wu <[email protected]>
iommu/mediatek: Fix protect memory setting
Thomas Hellstrom <[email protected]>
drm/vmwgfx: Unpin the screen object backup buffer when not used
Eric Sandeen <[email protected]>
ext4: don't complain about incorrect features when probing
Mimi Zohar <[email protected]>
ima: clear IMA_HASH
Philipp Puschmann <[email protected]>
arm: dts: socfpga: fix GIC PPI warning
Jay Vosburgh <[email protected]>
virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
Andreas Gruenbacher <[email protected]>
gfs2: Check for the end of metadata in punch_hole
Milton Miller <[email protected]>
watchdog: aspeed: Allow configuring for alternate boot
Petr Vorel <[email protected]>
ima: Fallback to the builtin hash algorithm
Jiandi An <[email protected]>
ima: Fix Kconfig to select TPM 2.0 CRB interface
Haiyang Zhang <[email protected]>
hv_netvsc: Fix the return status in RX path
Arjun Vynipadath <[email protected]>
cxgb4: Setup FW queues before registering netdev
Anand Jain <[email protected]>
btrfs: fix null pointer deref when target device is missing
Sebastian Gottschall <[email protected]>
ath9k: fix crash in spectral scan
Jarosław Janik <[email protected]>
nvme-pci: disable APST for Samsung NVMe SSD 960 EVO + ASUS PRIME Z370-A
James Smart <[email protected]>
nvme_fc: fix abort race on teardown with lld reject
Karthikeyan Periyasamy <[email protected]>
ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
Colin Ian King <[email protected]>
net: qualcomm: rmnet: check for null ep to avoid null pointer dereference
Fuyun Liang <[email protected]>
net: hns3: fix for returning wrong value problem in hns3_get_rss_key_size
Fuyun Liang <[email protected]>
net: hns3: fix for returning wrong value problem in hns3_get_rss_indir_size
Fuyun Liang <[email protected]>
net: hns3: fix for the wrong shift problem in hns3_set_txbd_baseinfo
Alexey Khoroshilov <[email protected]>
watchdog: davinci_wdt: fix error handling in davinci_wdt_probe()
Leon Romanovsky <[email protected]>
net/mlx5: Protect from command bit overflow
Jacob Keller <[email protected]>
i40e: hold the RTNL lock while changing interrupt schemes
Michael Ellerman <[email protected]>
selftests: Print the test we're running to /dev/kmsg
Frank Asseg <[email protected]>
tools/thermal: tmon: fix for segfault
Amitkumar Karwar <[email protected]>
rsi: fix kernel panic observed on 64bit machine
Michael Ellerman <[email protected]>
powerpc/perf: Fix kernel address leak via sampling registers
Madhavan Srinivasan <[email protected]>
powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer
Lorenzo Bianconi <[email protected]>
mt76x2: fix warning in ieee80211_get_key_rx_seq()
Lorenzo Bianconi <[email protected]>
mt76x2: fix possible NULL pointer dereferencing in mt76x2_tx()
Guenter Roeck <[email protected]>
hwmon: (nct6775) Fix writing pwmX_mode
Kan Liang <[email protected]>
perf mmap: Fix accessing unmapped mmap in perf_mmap__read_done()
Helge Deller <[email protected]>
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
Eran Ben Elisha <[email protected]>
net/mlx5e: Move all TX timeout logic to be under state lock
Sara Sharon <[email protected]>
iwlwifi: mvm: take RCU lock before dereferencing
Luca Coelho <[email protected]>
iwlwifi: mvm: check if mac80211_queue is valid in iwl_mvm_disable_txq
Greg Ungerer <[email protected]>
m68k: set dma and coherent masks for platform FEC ethernets
Alexander Shishkin <[email protected]>
intel_th: Use correct method of finding hub
Sebastian Andrzej Siewior <[email protected]>
iommu/amd: Take into account that alloc_dev_data() may return NULL
Anilkumar Kolli <[email protected]>
ath10k: advertize beacon_int_min_gcd
Harry Morris <[email protected]>
ieee802154: ca8210: fix uninitialised data read
Michael Ellerman <[email protected]>
powerpc/mpic: Check if cpu_possible() in mpic_physmask()
Lenny Szubowicz <[email protected]>
ACPI: acpi_pad: Fix memory leak in power saving threads
Aaro Koskinen <[email protected]>
drivers: macintosh: rack-meter: really fix bogus memsets
Dan Carpenter <[email protected]>
xen/acpi: off by one in read_acpi_id()
David Howells <[email protected]>
rxrpc: Don't treat call aborts as conn aborts
David Howells <[email protected]>
rxrpc: Fix Tx ring annotation after initial Tx failure
Marc Dionne <[email protected]>
rxrpc: Fix resend event time calculation
Qu Wenruo <[email protected]>
btrfs: qgroup: Fix root item corruption when multiple same source snapshots are created with quota enabled
Jeff Mahoney <[email protected]>
btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
Filipe Manana <[email protected]>
Btrfs: fix copy_items() return value when logging an inode
Qu Wenruo <[email protected]>
btrfs: tests/qgroup: Fix wrong tree backref level
Nicholas Piggin <[email protected]>
powerpc/64s: sreset panic if there is no debugger or crash dump handlers
Scott Branden <[email protected]>
bnxt_en: fix clear flags in ethtool reset handling
Florian Fainelli <[email protected]>
net: bgmac: Correctly annotate register space
Florian Fainelli <[email protected]>
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
Dan Carpenter <[email protected]>
platform/x86: dell-smbios: Fix memory leaks in build_tokens_sysfs()
Andrea Parri <[email protected]>
riscv/spinlock: Strengthen implementations with fences
David S. Miller <[email protected]>
sparc64: Make atomic_xchg() an inline function rather than a macro.
Geert Uytterhoeven <[email protected]>
dmaengine: rcar-dmac: Fix too early/late system suspend/resume callbacks
David Howells <[email protected]>
fscache: Fix hanging wait on page discarded by writeback
Alexander Graf <[email protected]>
lan78xx: Connect phy early
Sean Christopherson <[email protected]>
KVM: VMX: raise internal error for exception during invalid protected mode state
Sai Praneeth <[email protected]>
x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush()
Davidlohr Bueso <[email protected]>
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
Nicholas Piggin <[email protected]>
powerpc/64s/idle: Fix restore of AMOR on POWER9 after deep sleep
Jun Piao <[email protected]>
ocfs2/dlm: don't handle migrate lockres if already in shutdown
Mikhail Malygin <[email protected]>
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
Nikolay Borisov <[email protected]>
btrfs: Fix possible softlock on single core machines
Liu Bo <[email protected]>
Btrfs: fix NULL pointer dereference in log_dir_items
Liu Bo <[email protected]>
Btrfs: bail out on error during replay_dir_deletes
Yang Shi <[email protected]>
mm: thp: fix potential clearing to referenced flag in page_idle_clear_pte_refs_one()
Huang Ying <[email protected]>
mm: fix races between address_space dereference and free in page_evicatable
Claudio Imbrenda <[email protected]>
mm/ksm: fix interaction with THP
Thomas Gleixner <[email protected]>
genirq/affinity: Don't return with empty affinity masks on error
Thomas Falcon <[email protected]>
ibmvnic: Zero used TX descriptor counter on reset
Esben Haabendal <[email protected]>
dp83640: Ensure against premature access to PHY registers after reset
Sandipan Das <[email protected]>
perf clang: Add support for recent clang versions
Sandipan Das <[email protected]>
perf tools: Fix perf builds with clang support
Anshuman Khandual <[email protected]>
powerpc/fscr: Enable interrupts earlier before calling get_user()
Shunyong Yang <[email protected]>
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
Carlos Maiolino <[email protected]>
Force log to disk before reading the AGF during a fstrim
Jens Axboe <[email protected]>
sr: get/drop reference to device in revalidate and check_events
Xidong Wang <[email protected]>
z3fold: fix memory leak
Tom Abraham <[email protected]>
swap: divide-by-zero when zero length swap file on ssd
Andrey Konovalov <[email protected]>
kasan, slub: fix handling of kasan_slab_free hook
Andrey Konovalov <[email protected]>
kasan: fix invalid-free test crashing the kernel
Danilo Krummrich <[email protected]>
fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table
James Smart <[email protected]>
nvme: expand nvmf_check_if_ready checks
Sriharsha Basavapatna <[email protected]>
bnxt_en: Ignore src port field in decap filter nodes
Dave Hansen <[email protected]>
x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init
Joerg Roedel <[email protected]>
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries
Filipe Manana <[email protected]>
Btrfs: fix loss of prealloc extents past i_size after fsync log replay
Liu Bo <[email protected]>
Btrfs: clean up resources during umount after trans is aborted
Johannes Thumshirn <[email protected]>
nvme: don't send keep-alives to the discovery controller
Jean Delvare <[email protected]>
firmware: dmi_scan: Fix UUID length safety check
Rich Felker <[email protected]>
sh: fix debug trap failure to process signals before return to user
Pascal Roeleven <[email protected]>
ARM: dts: sun4i: Fix incorrect clocks for displays
David Vrabel <[email protected]>
x86/kvm: fix LAPIC timer drift when guest uses periodic mode
Jim Mattson <[email protected]>
kvm: x86: IA32_ARCH_CAPABILITIES is always supported
Wei Huang <[email protected]>
KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
David Hildenbrand <[email protected]>
KVM: s390: vsie: fix < 8k check for the itdba
Konrad Rzeszutek Wilk <[email protected]>
KVM/VMX: Expose SSBD properly to guests
Rafael J. Wysocki <[email protected]>
PM / core: Fix direct_complete handling for devices with no callbacks
Gustavo A. R. Silva <[email protected]>
kernel/sys.c: fix potential Spectre v1 issue
David Hildenbrand <[email protected]>
kasan: fix memory hotplug during boot
David Hildenbrand <[email protected]>
kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
Andrey Ryabinin <[email protected]>
mm/kasan: don't vfree() nonexistent vm_area
Davidlohr Bueso <[email protected]>
ipc/shm: fix shmat() nil address after round-down when remapping
Davidlohr Bueso <[email protected]>
Revert "ipc/shm: Fix shmat mmap nil-page protection"
Matthew Wilcox <[email protected]>
idr: fix invalid ptr dereference on item delete
Rafał Miłecki <[email protected]>
bcma: fix buffer size caused crash in bcma_core_mips_print_irq()
Jens Axboe <[email protected]>
sr: pass down correctly sized SCSI sense buffer
Lidong Chen <[email protected]>
IB/umem: Use the correct mm during ib_umem_release
Michael J. Ruhl <[email protected]>
IB/hfi1: Use after free race condition in send context error path
Michael Neuling <[email protected]>
powerpc/64s: Clear PCR on boot
Jason A. Donenfeld <[email protected]>
arm64: export tishift functions to modules
Will Deacon <[email protected]>
arm64: lse: Add early clobbers to some input/output asm operands
Thomas Hellstrom <[email protected]>
drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
Joe Jin <[email protected]>
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
Sudip Mukherjee <[email protected]>
libata: blacklist Micron 500IT SSD with MU01 firmware
Tejun Heo <[email protected]>
libata: Blacklist some Sandisk SSDs for NCQ
Mika Westerberg <[email protected]>
ahci: Add PCI ID for Cannon Lake PCH-LP AHCI
Corneliu Doban <[email protected]>
mmc: sdhci-iproc: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus
Corneliu Doban <[email protected]>
mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
Srinath Mannam <[email protected]>
mmc: sdhci-iproc: remove hard coded mmc cap 1.8v
Mathieu Malaterre <[email protected]>
mmc: block: propagate correct returned value in mmc_rpmb_ioctl
Al Viro <[email protected]>
do d_instantiate/unlock_new_inode combinations safely
Ben Hutchings <[email protected]>
ALSA: timer: Fix pause event notification
Omar Sandoval <[email protected]>
Btrfs: fix error handling in btrfs_truncate()
Al Viro <[email protected]>
aio: fix io_destroy(2) vs. lookup_ioctx() race
Dave Chinner <[email protected]>
fs: don't scan the inode cache before SB_BORN is set
Al Viro <[email protected]>
fix breakage caused by d_find_alias() semantics change
Al Viro <[email protected]>
affs_lookup(): close a race with affs_remove_link()
Colin Ian King <[email protected]>
KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
Maciej W. Rozycki <[email protected]>
MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
Maciej W. Rozycki <[email protected]>
MIPS: ptrace: Expose FIR register through FP regset
Paul Cercueil <[email protected]>
MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4770
NeilBrown <[email protected]>
MIPS: c-r4k: Fix data corruption related to cache coherence
Alexandre Belloni <[email protected]>
MIPS: xilfpga: Actually include FDT in fitImage
Alexandre Belloni <[email protected]>
MIPS: xilfpga: Stop generating useless dtb.o
-------------
Diffstat:
.../devicetree/bindings/clock/sunxi-ccu.txt | 4 +
.../devicetree/bindings/display/msm/dsi.txt | 4 +
.../bindings/pinctrl/axis,artpec6-pinctrl.txt | 5 +-
Makefile | 4 +-
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
arch/arm/boot/dts/at91-tse850-3.dts | 2 +-
arch/arm/boot/dts/bcm283x.dtsi | 6 +-
arch/arm/boot/dts/dra71-evm.dts | 4 +-
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 52 +--
arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 2 +-
arch/arm/boot/dts/r8a7791-porter.dts | 2 +-
arch/arm/boot/dts/socfpga.dtsi | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 6 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 +-
arch/arm64/include/asm/atomic_lse.h | 24 +-
arch/arm64/kernel/arm64ksyms.c | 8 +
arch/arm64/lib/tishift.S | 15 +-
arch/m68k/coldfire/device.c | 12 +-
arch/mips/boot/compressed/uart-16550.c | 6 +-
arch/mips/boot/dts/xilfpga/Makefile | 2 -
arch/mips/cavium-octeon/octeon-irq.c | 10 +-
arch/mips/generic/Platform | 1 +
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +-
arch/mips/kernel/ptrace.c | 22 +-
arch/mips/kernel/ptrace32.c | 4 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-r4k.c | 9 +-
arch/powerpc/include/asm/book3s/64/slice.h | 27 ++
arch/powerpc/include/asm/irq_work.h | 1 +
arch/powerpc/include/asm/mmu-8xx.h | 6 +
arch/powerpc/include/asm/nohash/32/slice.h | 18 +
arch/powerpc/include/asm/nohash/64/slice.h | 12 +
arch/powerpc/include/asm/page.h | 1 +
arch/powerpc/include/asm/page_64.h | 59 ----
arch/powerpc/include/asm/slice.h | 42 +++
arch/powerpc/kernel/cpu_setup_power.S | 6 +
arch/powerpc/kernel/dt_cpu_ftrs.c | 1 +
arch/powerpc/kernel/idle_book3s.S | 2 +
arch/powerpc/kernel/setup-common.c | 2 +
arch/powerpc/kernel/traps.c | 47 ++-
arch/powerpc/mm/8xx_mmu.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +
arch/powerpc/mm/mmu_context_nohash.c | 18 +-
arch/powerpc/mm/slice.c | 49 ++-
arch/powerpc/perf/core-book3s.c | 25 ++
arch/powerpc/platforms/Kconfig.cputype | 1 +
arch/powerpc/platforms/powernv/npu-dma.c | 229 ++++++++-----
arch/powerpc/platforms/powernv/vas-debug.c | 11 +
arch/powerpc/platforms/powernv/vas.c | 6 +-
arch/powerpc/sysdev/mpic.c | 2 +-
arch/riscv/include/asm/fence.h | 12 +
arch/riscv/include/asm/spinlock.h | 29 +-
arch/s390/kvm/vsie.c | 2 +-
arch/sh/kernel/entry-common.S | 2 +-
arch/sparc/include/asm/atomic_64.h | 6 +-
arch/x86/events/core.c | 15 +-
arch/x86/events/intel/core.c | 12 +-
arch/x86/events/intel/ds.c | 92 ++++-
arch/x86/events/perf_event.h | 2 +-
arch/x86/include/asm/tlbflush.h | 7 +-
arch/x86/kernel/apic/apic.c | 2 +-
arch/x86/kernel/devicetree.c | 21 +-
arch/x86/kvm/cpuid.c | 9 +-
arch/x86/kvm/lapic.c | 26 +-
arch/x86/kvm/vmx.c | 20 +-
arch/x86/kvm/x86.c | 5 +-
arch/x86/mm/pageattr.c | 6 +-
arch/x86/mm/pgtable.c | 9 +
drivers/acpi/acpi_pad.c | 3 +
drivers/acpi/acpica/evevent.c | 9 +-
drivers/acpi/acpica/nseval.c | 8 +
drivers/acpi/acpica/psargs.c | 4 +
drivers/ata/ahci.c | 1 +
drivers/ata/libata-core.c | 6 +
drivers/base/firmware_class.c | 12 +-
drivers/base/power/main.c | 7 +-
drivers/base/regmap/regmap.c | 2 +-
drivers/bcma/driver_mips.c | 2 +-
drivers/block/null_blk.c | 46 +--
drivers/block/paride/pcd.c | 2 +
drivers/cdrom/cdrom.c | 3 -
drivers/cdrom/gdrom.c | 3 +
drivers/char/hw_random/bcm2835-rng.c | 2 +
drivers/char/hw_random/stm32-rng.c | 9 +
drivers/char/ipmi/ipmi_ssif.c | 4 +-
drivers/cpufreq/cppc_cpufreq.c | 23 +-
drivers/cpufreq/cpufreq.c | 6 +-
drivers/dma/pl330.c | 6 +-
drivers/dma/qcom/bam_dma.c | 27 +-
drivers/dma/sh/rcar-dmac.c | 13 +-
drivers/firmware/dmi_scan.c | 2 +-
drivers/firmware/efi/arm-runtime.c | 3 +
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 33 +-
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 8 +-
drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c | 7 +-
drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 4 +-
drivers/gpu/drm/bridge/sii902x.c | 20 +-
drivers/gpu/drm/drm_vblank.c | 8 +-
drivers/gpu/drm/meson/meson_drv.c | 29 +-
drivers/gpu/drm/omapdrm/dss/dss.c | 193 ++++++-----
drivers/gpu/drm/panel/panel-simple.c | 2 +-
drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 18 +-
drivers/gpu/drm/rockchip/rockchip_drm_gem.c | 7 +-
drivers/gpu/drm/vmwgfx/vmwgfx_msg.h | 25 +-
drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 31 +-
drivers/hwmon/nct6775.c | 10 +-
drivers/hwmon/pmbus/adm1275.c | 4 +-
drivers/hwmon/pmbus/max8688.c | 2 +-
drivers/hwtracing/coresight/coresight-cpu-debug.c | 2 +-
drivers/hwtracing/intel_th/core.c | 2 +-
drivers/i2c/busses/i2c-mv64xxx.c | 8 +-
drivers/ide/ide-cd.c | 2 +
drivers/infiniband/core/multicast.c | 26 +-
drivers/infiniband/core/umem.c | 7 +-
drivers/infiniband/hw/hfi1/chip.c | 4 +
drivers/infiniband/hw/mlx5/main.c | 3 +
drivers/infiniband/sw/rxe/rxe_verbs.c | 2 +-
drivers/iommu/amd_iommu.c | 2 +
drivers/iommu/mtk_iommu.c | 15 +-
drivers/iommu/mtk_iommu.h | 1 +
drivers/macintosh/rack-meter.c | 4 +-
drivers/md/bcache/bcache.h | 9 +-
drivers/md/bcache/super.c | 39 ++-
drivers/md/bcache/sysfs.c | 3 +-
drivers/md/bcache/writeback.c | 60 +++-
drivers/md/bcache/writeback.h | 2 -
drivers/misc/cxl/cxl.h | 4 +
drivers/misc/cxl/native.c | 11 +-
drivers/misc/cxl/pci.c | 19 +-
drivers/mmc/core/block.c | 2 +-
drivers/mmc/host/sdhci-iproc.c | 33 +-
drivers/net/ethernet/broadcom/bgmac.c | 3 +-
drivers/net/ethernet/broadcom/bgmac.h | 6 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 4 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 11 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c | 1 +
drivers/net/ethernet/cisco/enic/enic_main.c | 10 +-
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 23 +-
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 2 +-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +-
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 4 +-
drivers/net/ethernet/ibm/ibmvnic.c | 30 +-
drivers/net/ethernet/intel/i40e/i40e_main.c | 30 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +-
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 61 ++--
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 2 +
drivers/net/ethernet/renesas/sh_eth.c | 6 +-
drivers/net/ethernet/renesas/sh_eth.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 +-
drivers/net/hyperv/netvsc.c | 8 +-
drivers/net/hyperv/netvsc_drv.c | 2 +-
drivers/net/hyperv/rndis_filter.c | 4 +-
drivers/net/ieee802154/ca8210.c | 14 +-
drivers/net/phy/dp83640.c | 18 +
drivers/net/usb/lan78xx.c | 34 +-
drivers/net/virtio_net.c | 2 +-
drivers/net/wireless/ath/ath10k/mac.c | 12 +
drivers/net/wireless/ath/ath9k/common-spectral.c | 12 +-
drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c | 6 +-
drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 11 +-
drivers/net/wireless/mediatek/mt76/mt76x2_main.c | 11 +
drivers/net/wireless/mediatek/mt76/mt76x2_tx.c | 5 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 32 +-
drivers/net/wireless/rsi/rsi_sdio.h | 2 +
drivers/nvme/host/core.c | 17 +-
drivers/nvme/host/fabrics.c | 83 ++++-
drivers/nvme/host/fabrics.h | 33 +-
drivers/nvme/host/fc.c | 17 +-
drivers/nvme/host/nvme.h | 1 +
drivers/nvme/host/pci.c | 7 +-
drivers/nvme/host/rdma.c | 14 +-
drivers/nvme/target/loop.c | 11 +-
drivers/parisc/lba_pci.c | 20 +-
drivers/pci/pci-driver.c | 17 +-
drivers/pci/quirks.c | 3 +
drivers/pcmcia/cs.c | 10 +-
drivers/pcmcia/cs_internal.h | 1 +
drivers/phy/qualcomm/phy-qcom-qmp.c | 4 +-
drivers/phy/rockchip/phy-rockchip-emmc.c | 27 +-
drivers/pinctrl/devicetree.c | 6 +-
drivers/pinctrl/pinctrl-mcp23s08.c | 37 +-
drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 40 +--
drivers/platform/x86/dell-smbios-base.c | 4 +-
drivers/power/supply/ltc2941-battery-gauge.c | 8 +-
drivers/power/supply/max17042_battery.c | 1 +
drivers/regulator/gpio-regulator.c | 16 +-
drivers/regulator/of_regulator.c | 1 +
drivers/remoteproc/imx_rproc.c | 6 +-
drivers/s390/cio/vfio_ccw_fsm.c | 5 +
drivers/scsi/sr.c | 21 +-
drivers/scsi/sr_ioctl.c | 10 +-
drivers/soc/amlogic/meson-gx-pwrc-vpu.c | 6 +-
drivers/soc/qcom/wcnss_ctrl.c | 2 +-
drivers/soc/renesas/r8a77970-sysc.c | 12 +-
drivers/spi/spi-bcm-qspi.c | 4 +-
drivers/watchdog/asm9260_wdt.c | 8 +-
drivers/watchdog/aspeed_wdt.c | 13 +-
drivers/watchdog/davinci_wdt.c | 15 +-
drivers/watchdog/dw_wdt.c | 23 +-
drivers/watchdog/sprd_wdt.c | 4 +-
drivers/xen/swiotlb-xen.c | 2 +-
drivers/xen/xen-acpi-processor.c | 6 +-
drivers/zorro/zorro.c | 12 +
fs/affs/namei.c | 10 +-
fs/aio.c | 4 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/disk-io.c | 5 +-
fs/btrfs/extent-tree.c | 1 +
fs/btrfs/inode.c | 19 +-
fs/btrfs/tests/qgroup-tests.c | 2 +-
fs/btrfs/transaction.c | 10 +-
fs/btrfs/tree-log.c | 75 ++++-
fs/dcache.c | 22 ++
fs/ecryptfs/inode.c | 3 +-
fs/ext2/namei.c | 6 +-
fs/ext4/namei.c | 6 +-
fs/ext4/super.c | 12 +
fs/f2fs/checkpoint.c | 71 ++--
fs/f2fs/extent_cache.c | 3 +
fs/f2fs/file.c | 8 +-
fs/f2fs/namei.c | 12 +-
fs/fscache/page.c | 13 +-
fs/gfs2/bmap.c | 10 +-
fs/gfs2/file.c | 5 +-
fs/gfs2/quota.h | 2 +
fs/jffs2/dir.c | 12 +-
fs/jfs/namei.c | 12 +-
fs/nilfs2/namei.c | 6 +-
fs/notify/fanotify/fanotify.c | 19 +-
fs/notify/fanotify/fanotify.h | 3 +-
fs/notify/fanotify/fanotify_user.c | 2 +-
fs/ocfs2/dlm/dlmdomain.c | 14 -
fs/ocfs2/dlm/dlmdomain.h | 25 +-
fs/ocfs2/dlm/dlmrecovery.c | 9 +
fs/orangefs/namei.c | 9 +-
fs/proc/proc_sysctl.c | 3 +
fs/reiserfs/namei.c | 12 +-
fs/super.c | 30 +-
fs/udf/namei.c | 6 +-
fs/udf/super.c | 5 +-
fs/ufs/namei.c | 6 +-
fs/xfs/xfs_discard.c | 14 +-
include/drm/drm_vblank.h | 2 +-
include/linux/dcache.h | 1 +
include/rdma/ib_umem.h | 1 -
ipc/shm.c | 19 +-
kernel/audit.c | 2 +
kernel/debug/kdb/kdb_main.c | 27 +-
kernel/events/core.c | 49 ++-
kernel/irq/affinity.c | 15 +-
kernel/rcu/tree_plugin.h | 14 +-
kernel/sched/rt.c | 2 +
kernel/sys.c | 2 +
lib/radix-tree.c | 4 +-
lib/test_kasan.c | 8 +
mm/kasan/kasan.c | 66 +++-
mm/ksm.c | 28 ++
mm/page_idle.c | 12 +-
mm/slub.c | 57 ++--
mm/swapfile.c | 4 +
mm/vmscan.c | 8 +-
mm/z3fold.c | 9 +-
net/netlabel/netlabel_unlabeled.c | 10 +
net/rxrpc/call_event.c | 2 +-
net/rxrpc/input.c | 15 +-
net/rxrpc/sendmsg.c | 4 +-
net/smc/smc_ib.c | 10 +-
net/smc/smc_wr.h | 1 -
security/integrity/ima/Kconfig | 1 +
security/integrity/ima/ima_crypto.c | 2 +
security/integrity/ima/ima_main.c | 13 +
security/integrity/ima/ima_policy.c | 2 +-
security/selinux/hooks.c | 20 +-
sound/core/timer.c | 4 +-
sound/core/vmaster.c | 5 +-
tools/hv/hv_fcopy_daemon.c | 3 +-
tools/hv/hv_vss_daemon.c | 1 +
tools/perf/Makefile.perf | 3 +-
tools/perf/builtin-stat.c | 9 +-
tools/perf/builtin-top.c | 6 +-
tools/perf/tests/dwarf-unwind.c | 46 ++-
.../perf/tests/shell/trace+probe_libc_inet_pton.sh | 6 +-
tools/perf/tests/vmlinux-kallsyms.c | 2 +-
tools/perf/ui/browsers/annotate.c | 9 +-
tools/perf/util/c++/clang.cpp | 11 +-
tools/perf/util/hist.c | 4 +-
tools/perf/util/hist.h | 1 -
tools/perf/util/mmap.c | 6 +
tools/testing/radix-tree/idr-test.c | 7 +
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/net/fib-onlink-tests.sh | 375 +++++++++++++++++++++
tools/testing/selftests/net/psock_fanout.c | 3 +-
tools/thermal/tmon/sysfs.c | 12 +-
tools/thermal/tmon/tmon.c | 1 -
298 files changed, 3076 insertions(+), 1191 deletions(-)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 55a2aa08b3af519a9693f99cdf7fa6d8b62d9f65 upstream.
When DMA will be performed to a MIPS32 1004K CPS, the L1-cache for the
range needs to be flushed and invalidated first.
The code currently takes one of two approaches.
1/ If the range is less than the size of the dcache, then HIT type
requests flush/invalidate cache lines for the particular addresses.
HIT-type requests a globalised by the CPS so this is safe on SMP.
2/ If the range is larger than the size of dcache, then INDEX type
requests flush/invalidate the whole cache. INDEX type requests affect
the local cache only. CPS does not propagate them in any way. So this
invalidation is not safe on SMP CPS systems.
Data corruption due to '2' can quite easily be demonstrated by
repeatedly "echo 3 > /proc/sys/vm/drop_caches" and then sha1sum a file
that is several times the size of available memory. Dropping caches
means that large contiguous extents (large than dcache) are more likely.
This was not a problem before Linux-4.8 because option 2 was never used
if CONFIG_MIPS_CPS was defined. The commit which removed that apparently
didn't appreciate the full consequence of the change.
We could, in theory, globalize the INDEX based flush by sending an IPI
to other cores. These cache invalidation routines can be called with
interrupts disabled and synchronous IPI require interrupts to be
enabled. Asynchronous IPI may not trigger writeback soon enough. So we
cannot use IPI in practice.
We can already test if IPI would be needed for an INDEX operation with
r4k_op_needs_ipi(R4K_INDEX). If this is true then we mustn't try the
INDEX approach as we cannot use IPI. If this is false (e.g. when there
is only one core and hence one L1 cache) then it is safe to use the
INDEX approach without IPI.
This patch avoids options 2 if r4k_op_needs_ipi(R4K_INDEX), and so
eliminates the corruption.
Fixes: c00ab4896ed5 ("MIPS: Remove cpu_has_safe_index_cacheops")
Signed-off-by: NeilBrown <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.8+
Patchwork: https://patchwork.linux-mips.org/patch/19259/
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/mm/c-r4k.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -851,9 +851,12 @@ static void r4k_dma_cache_wback_inv(unsi
/*
* Either no secondary cache or the available caches don't have the
* subset property so we have to flush the primary caches
- * explicitly
+ * explicitly.
+ * If we would need IPI to perform an INDEX-type operation, then
+ * we have to use the HIT-type alternative as IPI cannot be used
+ * here due to interrupts possibly being disabled.
*/
- if (size >= dcache_size) {
+ if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
@@ -890,7 +893,7 @@ static void r4k_dma_cache_inv(unsigned l
return;
}
- if (size >= dcache_size) {
+ if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Neuling <[email protected]>
commit faf37c44a105f3608115785f17cbbf3500f8bc71 upstream.
Clear the PCR (Processor Compatibility Register) on boot to ensure we
are not running in a compatibility mode.
We've seen this cause problems when a crash (and kdump) occurs while
running compat mode guests. The kdump kernel then runs with the PCR
set and causes problems. The symptom in the kdump kernel (also seen in
petitboot after fast-reboot) is early userspace programs taking
sigills on newer instructions (seen in libc).
Signed-off-by: Michael Neuling <[email protected]>
Cc: [email protected]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/cpu_setup_power.S | 6 ++++++
arch/powerpc/kernel/dt_cpu_ftrs.c | 1 +
2 files changed, 7 insertions(+)
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -28,6 +28,7 @@ _GLOBAL(__setup_cpu_power7)
beqlr
li r0,0
mtspr SPRN_LPID,r0
+ mtspr SPRN_PCR,r0
mfspr r3,SPRN_LPCR
li r4,(LPCR_LPES1 >> LPCR_LPES_SH)
bl __init_LPCR_ISA206
@@ -41,6 +42,7 @@ _GLOBAL(__restore_cpu_power7)
beqlr
li r0,0
mtspr SPRN_LPID,r0
+ mtspr SPRN_PCR,r0
mfspr r3,SPRN_LPCR
li r4,(LPCR_LPES1 >> LPCR_LPES_SH)
bl __init_LPCR_ISA206
@@ -57,6 +59,7 @@ _GLOBAL(__setup_cpu_power8)
beqlr
li r0,0
mtspr SPRN_LPID,r0
+ mtspr SPRN_PCR,r0
mfspr r3,SPRN_LPCR
ori r3, r3, LPCR_PECEDH
li r4,0 /* LPES = 0 */
@@ -78,6 +81,7 @@ _GLOBAL(__restore_cpu_power8)
beqlr
li r0,0
mtspr SPRN_LPID,r0
+ mtspr SPRN_PCR,r0
mfspr r3,SPRN_LPCR
ori r3, r3, LPCR_PECEDH
li r4,0 /* LPES = 0 */
@@ -99,6 +103,7 @@ _GLOBAL(__setup_cpu_power9)
mtspr SPRN_PSSCR,r0
mtspr SPRN_LPID,r0
mtspr SPRN_PID,r0
+ mtspr SPRN_PCR,r0
mfspr r3,SPRN_LPCR
LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
or r3, r3, r4
@@ -123,6 +128,7 @@ _GLOBAL(__restore_cpu_power9)
mtspr SPRN_PSSCR,r0
mtspr SPRN_LPID,r0
mtspr SPRN_PID,r0
+ mtspr SPRN_PCR,r0
mfspr r3,SPRN_LPCR
LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
or r3, r3, r4
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -114,6 +114,7 @@ static void __restore_cpu_cpufeatures(vo
if (hv_mode) {
mtspr(SPRN_LPID, 0);
mtspr(SPRN_HFSCR, system_registers.hfscr);
+ mtspr(SPRN_PCR, 0);
}
mtspr(SPRN_FSCR, system_registers.fscr);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 9a3a92ccfe3620743d4ae57c987dc8e9c5f88996 upstream.
Check the TIF_32BIT_FPREGS task setting of the tracee rather than the
tracer in determining the layout of floating-point general registers in
the floating-point context, correcting access to odd-numbered registers
for o32 tracees where the setting disagrees between the two processes.
Fixes: 597ce1723e0f ("MIPS: Support for 64-bit FP with O32 binaries")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 3.14+
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/ptrace.c | 4 ++--
arch/mips/kernel/ptrace32.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -807,7 +807,7 @@ long arch_ptrace(struct task_struct *chi
fregs = get_fpu_regs(child);
#ifdef CONFIG_32BIT
- if (test_thread_flag(TIF_32BIT_FPREGS)) {
+ if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even
@@ -902,7 +902,7 @@ long arch_ptrace(struct task_struct *chi
init_fp_ctx(child);
#ifdef CONFIG_32BIT
- if (test_thread_flag(TIF_32BIT_FPREGS)) {
+ if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -99,7 +99,7 @@ long compat_arch_ptrace(struct task_stru
break;
}
fregs = get_fpu_regs(child);
- if (test_thread_flag(TIF_32BIT_FPREGS)) {
+ if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even
@@ -212,7 +212,7 @@ long compat_arch_ptrace(struct task_stru
sizeof(child->thread.fpu));
child->thread.fpu.fcr31 = 0;
}
- if (test_thread_flag(TIF_32BIT_FPREGS)) {
+ if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Hildenbrand <[email protected]>
commit ed1596f9ab958dd156a66c9ff1029d3761c1786a upstream.
We have to free memory again when we cancel onlining, otherwise a later
onlining attempt will fail.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug")
Signed-off-by: David Hildenbrand <[email protected]>
Acked-by: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/kasan/kasan.c | 1 +
1 file changed, 1 insertion(+)
--- a/mm/kasan/kasan.c
+++ b/mm/kasan/kasan.c
@@ -865,6 +865,7 @@ static int __meminit kasan_mem_notifier(
kmemleak_ignore(ret);
return NOTIFY_OK;
}
+ case MEM_CANCEL_ONLINE:
case MEM_OFFLINE: {
struct vm_struct *vm;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Hildenbrand <[email protected]>
commit 3f1959721558a976aaf9c2024d5bc884e6411bf7 upstream.
Using module_init() is wrong. E.g. ACPI adds and onlines memory before
our memory notifier gets registered.
This makes sure that ACPI memory detected during boot up will not result
in a kernel crash.
Easily reproducible with QEMU, just specify a DIMM when starting up.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 786a8959912e ("kasan: disable memory hotplug")
Signed-off-by: David Hildenbrand <[email protected]>
Acked-by: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/kasan/kasan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/kasan/kasan.c
+++ b/mm/kasan/kasan.c
@@ -897,5 +897,5 @@ static int __init kasan_memhotplug_init(
return 0;
}
-module_init(kasan_memhotplug_init);
+core_initcall(kasan_memhotplug_init);
#endif
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pascal Roeleven <[email protected]>
commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532 upstream.
Some displays on sun4i devices wouldn't properly stay on unless
'clk_ignore_unused' is used.
Change the duplicate clocks to the probably intended ones.
Cc: <[email protected]>
Signed-off-by: Pascal Roeleven <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -76,7 +76,7 @@
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
<&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
- <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
<&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
<&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
@@ -88,7 +88,7 @@
allwinner,pipeline = "de_fe0-de_be0-lcd0";
clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
<&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
- <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
<&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -99,7 +99,7 @@
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
<&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
- <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
<&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
<&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corneliu Doban <[email protected]>
commit 3de06d5a1f05c11c94cbb68af14dbfa7fb81d78b upstream.
The SDHCI_QUIRK2_HOST_OFF_CARD_ON is needed for the driver to
properly reset the host controller (reset all) on initialization
after exiting deep sleep.
Signed-off-by: Corneliu Doban <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
Reviewed-by: Ray Jui <[email protected]>
Reviewed-by: Srinath Mannam <[email protected]>
Fixes: c833e92bbb60 ("mmc: sdhci-iproc: support standard byte register accesses")
Cc: [email protected] # v4.10+
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-iproc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -186,7 +186,7 @@ static const struct sdhci_ops sdhci_ipro
static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = {
.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
- .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN | SDHCI_QUIRK2_HOST_OFF_CARD_ON,
.ops = &sdhci_iproc_32only_ops,
};
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg <[email protected]>
commit 4544e403eb25552aed7f0ee181a7a506b8800403 upstream.
This one should be using the default LPM policy for mobile chipsets so
add the PCI ID to the driver list of supported revices.
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/ahci.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -334,6 +334,7 @@ static const struct pci_device_id ahci_p
{ PCI_VDEVICE(INTEL, 0x9c07), board_ahci_mobile }, /* Lynx LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c0e), board_ahci_mobile }, /* Lynx LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c0f), board_ahci_mobile }, /* Lynx LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9dd3), board_ahci_mobile }, /* Cannon Lake PCH-LP AHCI */
{ PCI_VDEVICE(INTEL, 0x1f22), board_ahci }, /* Avoton AHCI */
{ PCI_VDEVICE(INTEL, 0x1f23), board_ahci }, /* Avoton AHCI */
{ PCI_VDEVICE(INTEL, 0x1f24), board_ahci }, /* Avoton RAID */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <[email protected]>
commit f7068114d45ec55996b9040e98111afa56e010fe upstream.
We're casting the CDROM layer request_sense to the SCSI sense
buffer, but the former is 64 bytes and the latter is 96 bytes.
As we generally allocate these on the stack, we end up blowing
up the stack.
Fix this by wrapping the scsi_execute() call with a properly
sized sense buffer, and copying back the bits for the CDROM
layer.
Cc: [email protected]
Reported-by: Piotr Gabriel Kosinski <[email protected]>
Reported-by: Daniel Shapira <[email protected]>
Tested-by: Kees Cook <[email protected]>
Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request")
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sr_ioctl.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -188,9 +188,13 @@ int sr_do_ioctl(Scsi_CD *cd, struct pack
struct scsi_device *SDev;
struct scsi_sense_hdr sshdr;
int result, err = 0, retries = 0;
+ unsigned char sense_buffer[SCSI_SENSE_BUFFERSIZE], *senseptr = NULL;
SDev = cd->device;
+ if (cgc->sense)
+ senseptr = sense_buffer;
+
retry:
if (!scsi_block_when_processing_errors(SDev)) {
err = -ENODEV;
@@ -198,10 +202,12 @@ int sr_do_ioctl(Scsi_CD *cd, struct pack
}
result = scsi_execute(SDev, cgc->cmd, cgc->data_direction,
- cgc->buffer, cgc->buflen,
- (unsigned char *)cgc->sense, &sshdr,
+ cgc->buffer, cgc->buflen, senseptr, &sshdr,
cgc->timeout, IOCTL_RETRIES, 0, 0, NULL);
+ if (cgc->sense)
+ memcpy(cgc->sense, sense_buffer, sizeof(*cgc->sense));
+
/* Minimal error checking. Ignore cases we know about, and report the rest. */
if (driver_byte(result) != 0) {
switch (sshdr.sense_key) {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Omar Sandoval <[email protected]>
commit d50147381aa0c9725d63a677c138c47f55d6d3bc upstream.
Jun Wu at Facebook reported that an internal service was seeing a return
value of 1 from ftruncate() on Btrfs in some cases. This is coming from
the NEED_TRUNCATE_BLOCK return value from btrfs_truncate_inode_items().
btrfs_truncate() uses two variables for error handling, ret and err.
When btrfs_truncate_inode_items() returns non-zero, we set err to the
return value. However, NEED_TRUNCATE_BLOCK is not an error. Make sure we
only set err if ret is an error (i.e., negative).
To reproduce the issue: mount a filesystem with -o compress-force=zstd
and the following program will encounter return value of 1 from
ftruncate:
int main(void) {
char buf[256] = { 0 };
int ret;
int fd;
fd = open("test", O_CREAT | O_WRONLY | O_TRUNC, 0666);
if (fd == -1) {
perror("open");
return EXIT_FAILURE;
}
if (write(fd, buf, sizeof(buf)) != sizeof(buf)) {
perror("write");
close(fd);
return EXIT_FAILURE;
}
if (fsync(fd) == -1) {
perror("fsync");
close(fd);
return EXIT_FAILURE;
}
ret = ftruncate(fd, 128);
if (ret) {
printf("ftruncate() returned %d\n", ret);
close(fd);
return EXIT_FAILURE;
}
close(fd);
return EXIT_SUCCESS;
}
Fixes: ddfae63cc8e0 ("btrfs: move btrfs_truncate_block out of trans handle")
CC: [email protected] # 4.15+
Reported-by: Jun Wu <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -9238,7 +9238,8 @@ static int btrfs_truncate(struct inode *
BTRFS_EXTENT_DATA_KEY);
trans->block_rsv = &fs_info->trans_block_rsv;
if (ret != -ENOSPC && ret != -EAGAIN) {
- err = ret;
+ if (ret < 0)
+ err = ret;
break;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sandipan Das <[email protected]>
[ Upstream commit c2fb54a183cfe77c6fdc9d71e2d5299c1c302a6e ]
For libclang, some distro packages provide static libraries (.a) while
some provide shared libraries (.so). Currently, perf code can only be
linked with static libraries. This makes perf build possible for both
cases.
Signed-off-by: Sandipan Das <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Fixes: d58ac0bf8d1e ("perf build: Add clang and llvm compile and linking support")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/Makefile.perf | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -364,7 +364,8 @@ LIBS = -Wl,--whole-archive $(PERFLIBS) $
ifeq ($(USE_CLANG), 1)
CLANGLIBS_LIST = AST Basic CodeGen Driver Frontend Lex Tooling Edit Sema Analysis Parse Serialization
- LIBCLANG = $(foreach l,$(CLANGLIBS_LIST),$(wildcard $(shell $(LLVM_CONFIG) --libdir)/libclang$(l).a))
+ CLANGLIBS_NOEXT_LIST = $(foreach l,$(CLANGLIBS_LIST),$(shell $(LLVM_CONFIG) --libdir)/libclang$(l))
+ LIBCLANG = $(foreach l,$(CLANGLIBS_NOEXT_LIST),$(wildcard $(l).a $(l).so))
LIBS += -Wl,--start-group $(LIBCLANG) -Wl,--end-group
endif
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Hildenbrand <[email protected]>
commit f4a551b72358facbbe5714248dff78404272feee upstream.
By missing an "L", we might detect some addresses to be <8k,
although they are not.
e.g. for itdba = 100001fff
!(gpa & ~0x1fffU) -> 1
!(gpa & ~0x1fffUL) -> 0
So we would report a SIE validity intercept although everything is fine.
Fixes: 166ecb3 ("KVM: s390: vsie: support transactional execution")
Reported-by: Dan Carpenter <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Reviewed-by: Janosch Frank <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Janosch Frank <[email protected]>
Cc: [email protected] # v4.8+
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kvm/vsie.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -578,7 +578,7 @@ static int pin_blocks(struct kvm_vcpu *v
gpa = READ_ONCE(scb_o->itdba) & ~0xffUL;
if (gpa && (scb_s->ecb & ECB_TE)) {
- if (!(gpa & ~0x1fffU)) {
+ if (!(gpa & ~0x1fffUL)) {
rc = set_validity_icpt(scb_s, 0x0080U);
goto unpin;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Esben Haabendal <[email protected]>
[ Upstream commit 76327a35caabd1a932e83d6a42b967aa08584e5d ]
The datasheet specifies a 3uS pause after performing a software
reset. The default implementation of genphy_soft_reset() does not
provide this, so implement soft_reset with the needed pause.
Signed-off-by: Esben Haabendal <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/dp83640.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1207,6 +1207,23 @@ static void dp83640_remove(struct phy_de
kfree(dp83640);
}
+static int dp83640_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_soft_reset(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* From DP83640 datasheet: "Software driver code must wait 3 us
+ * following a software reset before allowing further serial MII
+ * operations with the DP83640."
+ */
+ udelay(10); /* Taking udelay inaccuracy into account */
+
+ return 0;
+}
+
static int dp83640_config_init(struct phy_device *phydev)
{
struct dp83640_private *dp83640 = phydev->priv;
@@ -1501,6 +1518,7 @@ static struct phy_driver dp83640_driver
.flags = PHY_HAS_INTERRUPT,
.probe = dp83640_probe,
.remove = dp83640_remove,
+ .soft_reset = dp83640_soft_reset,
.config_init = dp83640_config_init,
.ack_interrupt = dp83640_ack_interrupt,
.config_intr = dp83640_config_intr,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <[email protected]>
[ Upstream commit 0211e12dd0a5385ecffd3557bc570dbad7fcf245 ]
When the allocation of node_to_possible_cpumask fails, then
irq_create_affinity_masks() returns with a pointer to the empty affinity
masks array, which will cause malfunction.
Reorder the allocations so the masks array allocation comes last and every
failure path returns NULL.
Fixes: 9a0ef98e186d ("genirq/affinity: Assign vectors to all present CPUs")
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/irq/affinity.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
--- a/kernel/irq/affinity.c
+++ b/kernel/irq/affinity.c
@@ -108,7 +108,7 @@ irq_create_affinity_masks(int nvecs, con
int affv = nvecs - affd->pre_vectors - affd->post_vectors;
int last_affv = affv + affd->pre_vectors;
nodemask_t nodemsk = NODE_MASK_NONE;
- struct cpumask *masks;
+ struct cpumask *masks = NULL;
cpumask_var_t nmsk, *node_to_possible_cpumask;
/*
@@ -121,13 +121,13 @@ irq_create_affinity_masks(int nvecs, con
if (!zalloc_cpumask_var(&nmsk, GFP_KERNEL))
return NULL;
- masks = kcalloc(nvecs, sizeof(*masks), GFP_KERNEL);
- if (!masks)
- goto out;
-
node_to_possible_cpumask = alloc_node_to_possible_cpumask();
if (!node_to_possible_cpumask)
- goto out;
+ goto outcpumsk;
+
+ masks = kcalloc(nvecs, sizeof(*masks), GFP_KERNEL);
+ if (!masks)
+ goto outnodemsk;
/* Fill out vectors at the beginning that don't need affinity */
for (curvec = 0; curvec < affd->pre_vectors; curvec++)
@@ -192,8 +192,9 @@ done:
/* Fill out vectors at the end that don't need affinity */
for (; curvec < nvecs; curvec++)
cpumask_copy(masks + curvec, irq_default_affinity);
+outnodemsk:
free_node_to_possible_cpumask(node_to_possible_cpumask);
-out:
+outcpumsk:
free_cpumask_var(nmsk);
return masks;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
[ Upstream commit 80c0b4210a963e31529e15bf90519708ec947596 ]
0, 1 and <0 can be returned by btrfs_next_leaf(), and when <0 is
returned, path->nodes[0] could be NULL, log_dir_items lacks such a
check for <0 and we may run into a null pointer dereference panic.
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Liu Bo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3548,8 +3548,11 @@ static noinline int log_dir_items(struct
* from this directory and from this transaction
*/
ret = btrfs_next_leaf(root, path);
- if (ret == 1) {
- last_offset = (u64)-1;
+ if (ret) {
+ if (ret == 1)
+ last_offset = (u64)-1;
+ else
+ err = ret;
goto done;
}
btrfs_item_key_to_cpu(path->nodes[0], &tmp, path->slots[0]);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Danilo Krummrich <[email protected]>
[ Upstream commit a0b0d1c345d0317efe594df268feb5ccc99f651e ]
proc_sys_link_fill_cache() does not take currently unregistering sysctl
tables into account, which might result into a page fault in
sysctl_follow_link() - add a check to fix it.
This bug has been present since v3.4.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets")
Signed-off-by: Danilo Krummrich <[email protected]>
Acked-by: Kees Cook <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: "Luis R . Rodriguez" <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/proc/proc_sysctl.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -707,7 +707,10 @@ static bool proc_sys_link_fill_cache(str
struct ctl_table *table)
{
bool ret = true;
+
head = sysctl_head_grab(head);
+ if (IS_ERR(head))
+ return false;
if (S_ISLNK(table->mode)) {
/* It is not an error if we can not follow the link ignore it */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joerg Roedel <[email protected]>
[ Upstream commit e3e288121408c3abeed5af60b87b95c847143845 ]
The pmd_set_huge() and pud_set_huge() functions are used from
the generic ioremap() code to establish large mappings where this
is possible.
But the generic ioremap() code does not check whether the
PMD/PUD entries are already populated with a non-leaf entry,
so that any page-table pages these entries point to will be
lost.
Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a
BUG_ON() in vmalloc_sync_one() when PMD entries are synced
from swapper_pg_dir to the current page-table. This happens
because the PMD entry from swapper_pg_dir was promoted to a
huge-page entry while the current PGD still contains the
non-leaf entry. Because both entries are present and point
to a different page, the BUG_ON() triggers.
This was actually triggered with pti-x32 enabled in a KVM
virtual machine by the graphics driver.
A real and better fix for that would be to improve the
page-table handling in the generic ioremap() code. But that is
out-of-scope for this patch-set and left for later work.
Reported-by: David H. Gutteridge <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Laight <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: Eduardo Valentin <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/pgtable.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/mm.h>
#include <linux/gfp.h>
+#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/tlb.h>
@@ -636,6 +637,10 @@ int pud_set_huge(pud_t *pud, phys_addr_t
(mtrr != MTRR_TYPE_WRBACK))
return 0;
+ /* Bail out if we are we on a populated non-leaf entry: */
+ if (pud_present(*pud) && !pud_huge(*pud))
+ return 0;
+
prot = pgprot_4k_2_large(prot);
set_pte((pte_t *)pud, pfn_pte(
@@ -664,6 +669,10 @@ int pmd_set_huge(pmd_t *pmd, phys_addr_t
return 0;
}
+ /* Bail out if we are we on a populated non-leaf entry: */
+ if (pmd_present(*pmd) && !pmd_huge(*pmd))
+ return 0;
+
prot = pgprot_4k_2_large(prot);
set_pte((pte_t *)pmd, pfn_pte(
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
[ Upstream commit 0834d627fbea00c1444075eb3e448e1974da452d ]
In mpic_physmask() we loop over all CPUs up to 32, then get the hard
SMP processor id of that CPU.
Currently that's possibly walking off the end of the paca array, but
in a future patch we will change the paca array to be an array of
pointers, and in that case we will get a NULL for missing CPUs and
oops. eg:
Unable to handle kernel paging request for data at address 0x88888888888888b8
Faulting instruction address: 0xc00000000004e380
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP .mpic_set_affinity+0x60/0x1a0
LR .irq_do_set_affinity+0x48/0x100
Fix it by checking the CPU is possible, this also fixes the code if
there are gaps in the CPU numbering which probably never happens on
mpic systems but who knows.
Debugged-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/sysdev/mpic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -626,7 +626,7 @@ static inline u32 mpic_physmask(u32 cpum
int i;
u32 mask = 0;
- for (i = 0; i < min(32, NR_CPUS); ++i, cpumask >>= 1)
+ for (i = 0; i < min(32, NR_CPUS) && cpu_possible(i); ++i, cpumask >>= 1)
mask |= (cpumask & 1) << get_hard_smp_processor_id(i);
return mask;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anilkumar Kolli <[email protected]>
[ Upstream commit 8ebee73b574ad3dd1f14d461f65ceaffbd637650 ]
This patch fixes regression caused by 0c317a02ca98
("cfg80211: support virtual interfaces with different beacon intervals"),
with this change cfg80211 expects the driver to advertize
'beacon_int_min_gcd' to support different beacon intervals in multivap
scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Anilkumar Kolli <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7873,6 +7873,7 @@ static const struct ieee80211_iface_comb
.max_interfaces = 8,
.num_different_channels = 1,
.beacon_int_infra_match = true,
+ .beacon_int_min_gcd = 1,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
@@ -7996,6 +7997,7 @@ static const struct ieee80211_iface_comb
.max_interfaces = 16,
.num_different_channels = 1,
.beacon_int_infra_match = true,
+ .beacon_int_min_gcd = 1,
#ifdef CONFIG_ATH10K_DFS_CERTIFIED
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rich Felker <[email protected]>
[ Upstream commit 96a598996f6ac518ac79839ecbb17c91af91f4f7 ]
When responding to a debug trap (breakpoint) in userspace, the
kernel's trap handler raised SIGTRAP but returned from the trap via a
code path that ignored pending signals, resulting in an infinite loop
re-executing the trapping instruction.
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sh/kernel/entry-common.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -255,7 +255,7 @@ debug_trap:
mov.l @r8, r8
jsr @r8
nop
- bra __restore_all
+ bra ret_from_exception
nop
CFI_ENDPROC
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 2c98425720233ae3e135add0c7e869b32913502f ]
If the fscache asynchronous write operation elects to discard a page that's
pending storage to the cache because the page would be over the store limit
then it needs to wake the page as someone may be waiting on completion of
the write.
The problem is that the store limit may be updated by a different
asynchronous operation - and so may miss the write - and that the store
limit may not even get updated until later by the netfs.
Fix the kernel hang by making fscache_write_op() mark as written any pages
that are over the limit.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fscache/page.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/fs/fscache/page.c
+++ b/fs/fscache/page.c
@@ -776,6 +776,7 @@ static void fscache_write_op(struct fsca
_enter("{OP%x,%d}", op->op.debug_id, atomic_read(&op->op.usage));
+again:
spin_lock(&object->lock);
cookie = object->cookie;
@@ -816,10 +817,6 @@ static void fscache_write_op(struct fsca
goto superseded;
page = results[0];
_debug("gang %d [%lx]", n, page->index);
- if (page->index >= op->store_limit) {
- fscache_stat(&fscache_n_store_pages_over_limit);
- goto superseded;
- }
radix_tree_tag_set(&cookie->stores, page->index,
FSCACHE_COOKIE_STORING_TAG);
@@ -829,6 +826,9 @@ static void fscache_write_op(struct fsca
spin_unlock(&cookie->stores_lock);
spin_unlock(&object->lock);
+ if (page->index >= op->store_limit)
+ goto discard_page;
+
fscache_stat(&fscache_n_store_pages);
fscache_stat(&fscache_n_cop_write_page);
ret = object->cache->ops->write_page(op, page);
@@ -844,6 +844,11 @@ static void fscache_write_op(struct fsca
_leave("");
return;
+discard_page:
+ fscache_stat(&fscache_n_store_pages_over_limit);
+ fscache_end_page_write(object, page);
+ goto again;
+
superseded:
/* this writer is going away and there aren't any more things to
* write */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Branden <[email protected]>
[ Upstream commit 2373d8d6a7932d28b8e31ea2a70bf6c002d97ac8 ]
Clear flags when reset command processed successfully for components
specified.
Fixes: 6502ad5963a5 ("bnxt_en: Add ETH_RESET_AP support")
Signed-off-by: Scott Branden <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -2552,16 +2552,20 @@ static int bnxt_reset(struct net_device
return -EOPNOTSUPP;
rc = bnxt_firmware_reset(dev, BNXT_FW_RESET_CHIP);
- if (!rc)
+ if (!rc) {
netdev_info(dev, "Reset request successful. Reload driver to complete reset\n");
+ *flags = 0;
+ }
} else if (*flags == ETH_RESET_AP) {
/* This feature is not supported in older firmware versions */
if (bp->hwrm_spec_code < 0x10803)
return -EOPNOTSUPP;
rc = bnxt_firmware_reset(dev, BNXT_FW_RESET_AP);
- if (!rc)
+ if (!rc) {
netdev_info(dev, "Reset Application Processor request successful.\n");
+ *flags = 0;
+ }
} else {
rc = -EINVAL;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller <[email protected]>
[ Upstream commit b845f66f78bf42a4ce98e5cfe0e94fab41dd0742 ]
Carlo Pisani noticed that his C3600 workstation behaved unstable during heavy
I/O on the PCI bus with a VIA VT6421 IDE/SATA PCI card.
To avoid such instability, this patch switches the LBA PCI bus from Hard Fail
mode into Soft Fail mode. In this mode the bus will return -1UL for timed out
MMIO transactions, which is exactly how the x86 (and most other architectures)
PCI busses behave.
This patch is based on a proposal by Grant Grundler and Kyle McMartin 10
years ago:
https://www.spinics.net/lists/linux-parisc/msg01027.html
Cc: Carlo Pisani <[email protected]>
Cc: Kyle McMartin <[email protected]>
Reviewed-by: Grant Grundler <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/parisc/lba_pci.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1403,9 +1403,27 @@ lba_hw_init(struct lba_device *d)
WRITE_REG32(stat, d->hba.base_addr + LBA_ERROR_CONFIG);
}
- /* Set HF mode as the default (vs. -1 mode). */
+
+ /*
+ * Hard Fail vs. Soft Fail on PCI "Master Abort".
+ *
+ * "Master Abort" means the MMIO transaction timed out - usually due to
+ * the device not responding to an MMIO read. We would like HF to be
+ * enabled to find driver problems, though it means the system will
+ * crash with a HPMC.
+ *
+ * In SoftFail mode "~0L" is returned as a result of a timeout on the
+ * pci bus. This is like how PCI busses on x86 and most other
+ * architectures behave. In order to increase compatibility with
+ * existing (x86) PCI hardware and existing Linux drivers we enable
+ * Soft Faul mode on PA-RISC now too.
+ */
stat = READ_REG32(d->hba.base_addr + LBA_STAT_CTL);
+#if defined(ENABLE_HARDFAIL)
WRITE_REG32(stat | HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
+#else
+ WRITE_REG32(stat & ~HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
+#endif
/*
** Writing a zero to STAT_CTL.rf (bit 0) will clear reset signal
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit c03a5aacde0c86f6dabab8f17a6d1911ee13b6c4 ]
Fall back to software encryption for hw unsupported ciphers in order
to fix the following warning in ieee80211_get_key_rx_seq routine:
WARNING: CPU: 1 PID: 1277 at backports-2017-11-01/net/mac80211/key.c:
1010 mt76_wcid_key_setup+0x6c/0x138 [mt76]
CPU: 1 PID: 1277 Comm: hostapd Tainted: G W 4.9.86 #0
Stack : 00000000 00000000 80527b4a 00000042 80523824 00000000 00000000 80520000
8fd79a9c 804bbda7 80454c84 00000001 000004fd 80523824 8f7e4ba0 8eceda12
00000010 8006af94 00000001 80520000 804c1f04 804c1f08 80459890 8ec999b4
00000003 800a7840 8f7e4ba0 8eceda12 8121de20 00000000 00000001 00c999b4
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
...
Call Trace:
[<8000f52c>] show_stack+0x70/0x8c
[<801d8d04>] dump_stack+0x94/0xd0
[<8002bcd4>] __warn+0x110/0x118
[<8002bd70>] warn_slowpath_null+0x1c/0x2c
[<8f0415cc>] mt76_wcid_key_setup+0x6c/0x138 [mt76]
[<8f1311b4>] mt76x2_dma_cleanup+0xa38/0x1048 [mt76x2e]
Fixes: 30ce7f4456ae ("mt76: validate rx CCMP PN")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Acked-by: Felix Fietkau <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76x2_main.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_main.c
@@ -336,6 +336,17 @@ mt76x2_set_key(struct ieee80211_hw *hw,
int idx = key->keyidx;
int ret;
+ /* fall back to sw encryption for unsupported ciphers */
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ case WLAN_CIPHER_SUITE_TKIP:
+ case WLAN_CIPHER_SUITE_CCMP:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
/*
* The hardware does not support per-STA RX GTK, fall back
* to software mode for these.
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiandi An <[email protected]>
[ Upstream commit fac37c628fd5d68fd7298d9b57ae8601ee1b4723 ]
TPM_CRB driver provides TPM CRB 2.0 support. If it is built as a
module, the TPM chip is registered after IMA init. tpm_pcr_read() in
IMA fails and displays the following message even though eventually
there is a TPM chip on the system.
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
Fix IMA Kconfig to select TPM_CRB so TPM_CRB driver is built in the kernel
and initializes before IMA.
Signed-off-by: Jiandi An <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/integrity/ima/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -10,6 +10,7 @@ config IMA
select CRYPTO_HASH_INFO
select TCG_TPM if HAS_IOMEM && !UML
select TCG_TIS if TCG_TPM && X86
+ select TCG_CRB if TCG_TPM && ACPI
select TCG_IBMVTPM if TCG_TPM && PPC_PSERIES
help
The Trusted Computing Group(TCG) runtime Integrity
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amitkumar Karwar <[email protected]>
[ Upstream commit 864db4d5085349fcfa1f260b5bcd2adde3d7f2ed ]
Following kernel panic is observed on 64bit machine while loading
the driver. It is fixed if we pass dynamically allocated memory to
SDIO for DMA.
BUG: unable to handle kernel paging request at ffffeb04000172e0
IP: sg_miter_stop+0x56/0x70
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Modules linked in: rsi_sdio(OE+) rsi_91x(OE) btrsi(OE) rfcomm bluetooth
ecdh_generic mac80211 mmc_block fuse xt_CHECKSUM iptable_mangle
drm_kms_helper mmc_core serio_raw drm firewire_ohci tg3
CPU: 0 PID: 4003 Comm: insmod Tainted: G OE 4.16.0-rc1+ #27
Hardware name: Dell Inc. Latitude E5500 /0DW634, BIOS
A19 06/13/2013
RIP: 0010:sg_miter_stop+0x56/0x70
RSP: 0018:ffff88007d003e78 EFLAGS: 00010002
RAX: 0000000000000003 RBX: 0000000000000004 RCX: 0000000000000000
RDX: ffffeb04000172c0 RSI: ffff88002f58002c RDI: ffff88007d003e80
RBP: 0000000000000004 R08: ffff88007d003e80 R09: 0000000000000008
R10: 0000000000000003 R11: 0000000000000001 R12: 0000000000000004
R13: ffff88002f580028 R14: 0000000000000000 R15: 0000000000000004
FS: 00007f35c29db700(0000) GS:ffff88007d000000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffeb04000172e0 CR3: 000000007038e000 CR4: 00000000000406f0
Call Trace:
<IRQ>
sg_copy_buffer+0xc6/0xf0
sdhci_tasklet_finish+0x170/0x260 [sdhci]
tasklet_action+0xf4/0x100
__do_softirq+0xef/0x26e
irq_exit+0xbe/0xd0
do_IRQ+0x4a/0xc0
common_interrupt+0xa2/0xa2
</IRQ>
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_sdio.c | 32 +++++++++++++++++++++-----------
drivers/net/wireless/rsi/rsi_sdio.h | 2 ++
2 files changed, 23 insertions(+), 11 deletions(-)
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -636,11 +636,14 @@ static int rsi_sdio_master_reg_read(stru
u32 *read_buf, u16 size)
{
u32 addr_on_bus, *data;
- u32 align[2] = {};
u16 ms_addr;
int status;
- data = PTR_ALIGN(&align[0], 8);
+ data = kzalloc(RSI_MASTER_REG_BUF_SIZE, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data = PTR_ALIGN(data, 8);
ms_addr = (addr >> 16);
status = rsi_sdio_master_access_msword(adapter, ms_addr);
@@ -648,7 +651,7 @@ static int rsi_sdio_master_reg_read(stru
rsi_dbg(ERR_ZONE,
"%s: Unable to set ms word to common reg\n",
__func__);
- return status;
+ goto err;
}
addr &= 0xFFFF;
@@ -666,7 +669,7 @@ static int rsi_sdio_master_reg_read(stru
(u8 *)data, 4);
if (status < 0) {
rsi_dbg(ERR_ZONE, "%s: AHB register read failed\n", __func__);
- return status;
+ goto err;
}
if (size == 2) {
if ((addr & 0x3) == 0)
@@ -688,17 +691,23 @@ static int rsi_sdio_master_reg_read(stru
*read_buf = *data;
}
- return 0;
+err:
+ kfree(data);
+ return status;
}
static int rsi_sdio_master_reg_write(struct rsi_hw *adapter,
unsigned long addr,
unsigned long data, u16 size)
{
- unsigned long data1[2], *data_aligned;
+ unsigned long *data_aligned;
int status;
- data_aligned = PTR_ALIGN(&data1[0], 8);
+ data_aligned = kzalloc(RSI_MASTER_REG_BUF_SIZE, GFP_KERNEL);
+ if (!data_aligned)
+ return -ENOMEM;
+
+ data_aligned = PTR_ALIGN(data_aligned, 8);
if (size == 2) {
*data_aligned = ((data << 16) | (data & 0xFFFF));
@@ -717,6 +726,7 @@ static int rsi_sdio_master_reg_write(str
rsi_dbg(ERR_ZONE,
"%s: Unable to set ms word to common reg\n",
__func__);
+ kfree(data_aligned);
return -EIO;
}
addr = addr & 0xFFFF;
@@ -726,12 +736,12 @@ static int rsi_sdio_master_reg_write(str
(adapter,
(addr | RSI_SD_REQUEST_MASTER),
(u8 *)data_aligned, size);
- if (status < 0) {
+ if (status < 0)
rsi_dbg(ERR_ZONE,
"%s: Unable to do AHB reg write\n", __func__);
- return status;
- }
- return 0;
+
+ kfree(data_aligned);
+ return status;
}
/**
--- a/drivers/net/wireless/rsi/rsi_sdio.h
+++ b/drivers/net/wireless/rsi/rsi_sdio.h
@@ -46,6 +46,8 @@ enum sdio_interrupt_type {
#define PKT_BUFF_AVAILABLE 1
#define FW_ASSERT_IND 2
+#define RSI_MASTER_REG_BUF_SIZE 12
+
#define RSI_DEVICE_BUFFER_STATUS_REGISTER 0xf3
#define RSI_FN1_INT_REGISTER 0xf9
#define RSI_INT_ENABLE_REGISTER 0x04
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
[ Upstream commit 415eb2a1aaa4881cf85bd86c683356fdd8094a23 ]
pwmX_mode is defined in the ABI as 0=DC mode, 1=pwm mode. The chip
register bit is set to 1 for DC mode. This got mixed up, and writing
1 into pwmX_mode resulted in DC mode enabled. Fix it up by using
the ABI definition throughout the driver for consistency.
Fixes: 77eb5b3703d99 ("hwmon: (nct6775) Add support for pwm, pwm_mode, ... ")
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/nct6775.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -1469,7 +1469,7 @@ static void nct6775_update_pwm(struct de
duty_is_dc = data->REG_PWM_MODE[i] &&
(nct6775_read_value(data, data->REG_PWM_MODE[i])
& data->PWM_MODE_MASK[i]);
- data->pwm_mode[i] = duty_is_dc;
+ data->pwm_mode[i] = !duty_is_dc;
fanmodecfg = nct6775_read_value(data, data->REG_FAN_MODE[i]);
for (j = 0; j < ARRAY_SIZE(data->REG_PWM); j++) {
@@ -2350,7 +2350,7 @@ show_pwm_mode(struct device *dev, struct
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
- return sprintf(buf, "%d\n", !data->pwm_mode[sattr->index]);
+ return sprintf(buf, "%d\n", data->pwm_mode[sattr->index]);
}
static ssize_t
@@ -2371,9 +2371,9 @@ store_pwm_mode(struct device *dev, struc
if (val > 1)
return -EINVAL;
- /* Setting DC mode is not supported for all chips/channels */
+ /* Setting DC mode (0) is not supported for all chips/channels */
if (data->REG_PWM_MODE[nr] == 0) {
- if (val)
+ if (!val)
return -EINVAL;
return count;
}
@@ -2382,7 +2382,7 @@ store_pwm_mode(struct device *dev, struc
data->pwm_mode[nr] = val;
reg = nct6775_read_value(data, data->REG_PWM_MODE[nr]);
reg &= ~data->PWM_MODE_MASK[nr];
- if (val)
+ if (!val)
reg |= data->PWM_MODE_MASK[nr];
nct6775_write_value(data, data->REG_PWM_MODE[nr], reg);
mutex_unlock(&data->update_lock);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jay Vosburgh <[email protected]>
[ Upstream commit bda7fab54828bbef2164bb23c0f6b1a7d05cc718 ]
The operstate update logic will leave an interface in the
default UNKNOWN operstate if the interface carrier state never changes
from the default carrier up state set at creation. This includes the
case of an explicit call to netif_carrier_on, as the carrier on to on
transition has no effect on operstate.
This affects virtio-net for the case that the virtio peer does
not support VIRTIO_NET_F_STATUS (the feature that provides carrier state
updates). Without this feature, the virtio specification states that
"the link should be assumed active," so, logically, the operstate should
be UP instead of UNKNOWN. This has impact on user space applications
that use the operstate to make availability decisions for the interface.
Resolve this by changing the virtio probe logic slightly to call
netif_carrier_off for both the "with" and "without" VIRTIO_NET_F_STATUS
cases, and then the existing call to netif_carrier_on for the "without"
case will cause an operstate transition.
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Jay Vosburgh <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/virtio_net.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2874,8 +2874,8 @@ static int virtnet_probe(struct virtio_d
/* Assume link up if device can't report link status,
otherwise get link status from config. */
+ netif_carrier_off(dev);
if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
- netif_carrier_off(dev);
schedule_work(&vi->config_work);
} else {
vi->status = VIRTIO_NET_S_LINK_UP;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin <[email protected]>
[ Upstream commit c1b25a17d24925b0961c319cfc3fd7e1dc778914 ]
POWER8 restores AMOR when waking from deep sleep, but POWER9 does not,
because it does not go through the subcore restore.
Have POWER9 restore it in core restore.
Fixes: ee97b6b99f42 ("powerpc/mm/radix: Setup AMOR in HV mode to allow key 0")
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/idle_book3s.S | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -834,6 +834,8 @@ BEGIN_FTR_SECTION
mtspr SPRN_PTCR,r4
ld r4,_RPR(r1)
mtspr SPRN_RPR,r4
+ ld r4,_AMOR(r1)
+ mtspr SPRN_AMOR,r4
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
ld r4,_TSCR(r1)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Parav Pandit <[email protected]>
[ Upstream commit 563c4ba3bd2b8b0b21c65669ec2226b1cfa1138b ]
ah_attr contains the port number to which cm_id is bound. However, while
searching for GID table for matching GID entry, the port number is
ignored.
This could cause the wrong GID to be used when the ah_attr is converted to
an AH.
Reviewed-by: Daniel Jurgens <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/multicast.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
--- a/drivers/infiniband/core/multicast.c
+++ b/drivers/infiniband/core/multicast.c
@@ -724,21 +724,19 @@ int ib_init_ah_from_mcmember(struct ib_d
{
int ret;
u16 gid_index;
- u8 p;
- if (rdma_protocol_roce(device, port_num)) {
- ret = ib_find_cached_gid_by_port(device, &rec->port_gid,
- gid_type, port_num,
- ndev,
- &gid_index);
- } else if (rdma_protocol_ib(device, port_num)) {
- ret = ib_find_cached_gid(device, &rec->port_gid,
- IB_GID_TYPE_IB, NULL, &p,
- &gid_index);
- } else {
- ret = -EINVAL;
- }
+ /* GID table is not based on the netdevice for IB link layer,
+ * so ignore ndev during search.
+ */
+ if (rdma_protocol_ib(device, port_num))
+ ndev = NULL;
+ else if (!rdma_protocol_roce(device, port_num))
+ return -EINVAL;
+ ret = ib_find_cached_gid_by_port(device, &rec->port_gid,
+ gid_type, port_num,
+ ndev,
+ &gid_index);
if (ret)
return ret;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seunghun Han <[email protected]>
[ Upstream commit 97f3c0a4b0579b646b6b10ae5a3d59f0441cc12c ]
I found an ACPI cache leak in ACPI early termination and boot continuing case.
When early termination occurs due to malicious ACPI table, Linux kernel
terminates ACPI function and continues to boot process. While kernel terminates
ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak.
Boot log of ACPI operand cache leak is as follows:
>[ 0.464168] ACPI: Added _OSI(Module Device)
>[ 0.467022] ACPI: Added _OSI(Processor Device)
>[ 0.469376] ACPI: Added _OSI(3.0 _SCP Extensions)
>[ 0.471647] ACPI: Added _OSI(Processor Aggregator Device)
>[ 0.477997] ACPI Error: Null stack entry at ffff880215c0aad8 (20170303/exresop-174)
>[ 0.482706] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (20170303/dswexec-461)
>[ 0.487503] ACPI Error: Method parse/execution failed [\DBG] (Node ffff88021710ab40), AE_AML_INTERNAL (20170303/psparse-543)
>[ 0.492136] ACPI Error: Method parse/execution failed [\_SB._INI] (Node ffff88021710a618), AE_AML_INTERNAL (20170303/psparse-543)
>[ 0.497683] ACPI: Interpreter enabled
>[ 0.499385] ACPI: (supports S0)
>[ 0.501151] ACPI: Using IOAPIC for interrupt routing
>[ 0.503342] ACPI Error: Null stack entry at ffff880215c0aad8 (20170303/exresop-174)
>[ 0.506522] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (20170303/dswexec-461)
>[ 0.510463] ACPI Error: Method parse/execution failed [\DBG] (Node ffff88021710ab40), AE_AML_INTERNAL (20170303/psparse-543)
>[ 0.514477] ACPI Error: Method parse/execution failed [\_PIC] (Node ffff88021710ab18), AE_AML_INTERNAL (20170303/psparse-543)
>[ 0.518867] ACPI Exception: AE_AML_INTERNAL, Evaluating _PIC (20170303/bus-991)
>[ 0.522384] kmem_cache_destroy Acpi-Operand: Slab cache still has objects
>[ 0.524597] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26
>[ 0.526795] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006
>[ 0.529668] Call Trace:
>[ 0.530811] ? dump_stack+0x5c/0x81
>[ 0.532240] ? kmem_cache_destroy+0x1aa/0x1c0
>[ 0.533905] ? acpi_os_delete_cache+0xa/0x10
>[ 0.535497] ? acpi_ut_delete_caches+0x3f/0x7b
>[ 0.537237] ? acpi_terminate+0xa/0x14
>[ 0.538701] ? acpi_init+0x2af/0x34f
>[ 0.540008] ? acpi_sleep_proc_init+0x27/0x27
>[ 0.541593] ? do_one_initcall+0x4e/0x1a0
>[ 0.543008] ? kernel_init_freeable+0x19e/0x21f
>[ 0.546202] ? rest_init+0x80/0x80
>[ 0.547513] ? kernel_init+0xa/0x100
>[ 0.548817] ? ret_from_fork+0x25/0x30
>[ 0.550587] vgaarb: loaded
>[ 0.551716] EDAC MC: Ver: 3.0.0
>[ 0.553744] PCI: Probing PCI hardware
>[ 0.555038] PCI host bridge to bus 0000:00
> ... Continue to boot and log is omitted ...
I analyzed this memory leak in detail and found acpi_ns_evaluate() function
only removes Info->return_object in AE_CTRL_RETURN_VALUE case. But, when errors
occur, the status value is not AE_CTRL_RETURN_VALUE, and Info->return_object is
also not null. Therefore, this causes acpi operand memory leak.
This cache leak causes a security threat because an old kernel (<= 4.9) shows
memory locations of kernel functions in stack dump. Some malicious users
could use this information to neutralize kernel ASLR.
I made a patch to fix ACPI operand cache leak.
Signed-off-by: Seunghun Han <[email protected]>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpica/nseval.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/acpi/acpica/nseval.c
+++ b/drivers/acpi/acpica/nseval.c
@@ -308,6 +308,14 @@ acpi_status acpi_ns_evaluate(struct acpi
/* Map AE_CTRL_RETURN_VALUE to AE_OK, we are done with it */
status = AE_OK;
+ } else if (ACPI_FAILURE(status)) {
+
+ /* If return_object exists, delete it */
+
+ if (info->return_object) {
+ acpi_ut_remove_reference(info->return_object);
+ info->return_object = NULL;
+ }
}
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: "leilei.lin" <[email protected]>
[ Upstream commit 33801b94741d6c3be9713c10aa627477216c21e2 ]
There's two problems when installing cgroup events on CPUs: firstly
list_update_cgroup_event() only tries to set cpuctx->cgrp for the
first event, if that mismatches on @cgrp we'll not try again for later
additions.
Secondly, when we install a cgroup event into an active context, only
issue an event reprogram when the event matches the current cgroup
context. This avoids a pointless event reprogramming.
Signed-off-by: leilei.lin <[email protected]>
[ Improved the changelog and comments. ]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/core.c | 46 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 35 insertions(+), 11 deletions(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -948,27 +948,39 @@ list_update_cgroup_event(struct perf_eve
if (!is_cgroup_event(event))
return;
- if (add && ctx->nr_cgroups++)
- return;
- else if (!add && --ctx->nr_cgroups)
- return;
/*
* Because cgroup events are always per-cpu events,
* this will always be called from the right CPU.
*/
cpuctx = __get_cpu_context(ctx);
- cpuctx_entry = &cpuctx->cgrp_cpuctx_entry;
- /* cpuctx->cgrp is NULL unless a cgroup event is active in this CPU .*/
- if (add) {
+
+ /*
+ * Since setting cpuctx->cgrp is conditional on the current @cgrp
+ * matching the event's cgroup, we must do this for every new event,
+ * because if the first would mismatch, the second would not try again
+ * and we would leave cpuctx->cgrp unset.
+ */
+ if (add && !cpuctx->cgrp) {
struct perf_cgroup *cgrp = perf_cgroup_from_task(current, ctx);
- list_add(cpuctx_entry, this_cpu_ptr(&cgrp_cpuctx_list));
if (cgroup_is_descendant(cgrp->css.cgroup, event->cgrp->css.cgroup))
cpuctx->cgrp = cgrp;
- } else {
- list_del(cpuctx_entry);
- cpuctx->cgrp = NULL;
}
+
+ if (add && ctx->nr_cgroups++)
+ return;
+ else if (!add && --ctx->nr_cgroups)
+ return;
+
+ /* no cgroup running */
+ if (!add)
+ cpuctx->cgrp = NULL;
+
+ cpuctx_entry = &cpuctx->cgrp_cpuctx_entry;
+ if (add)
+ list_add(cpuctx_entry, this_cpu_ptr(&cgrp_cpuctx_list));
+ else
+ list_del(cpuctx_entry);
}
#else /* !CONFIG_CGROUP_PERF */
@@ -2328,6 +2340,18 @@ static int __perf_install_in_context(vo
raw_spin_lock(&task_ctx->lock);
}
+#ifdef CONFIG_CGROUP_PERF
+ if (is_cgroup_event(event)) {
+ /*
+ * If the current cgroup doesn't match the event's
+ * cgroup, we should not try to schedule it.
+ */
+ struct perf_cgroup *cgrp = perf_cgroup_from_task(current, ctx);
+ reprogram = cgroup_is_descendant(cgrp->css.cgroup,
+ event->cgrp->css.cgroup);
+ }
+#endif
+
if (reprogram) {
ctx_sched_out(ctx, cpuctx, EVENT_TIME);
add_event_to_ctx(event, ctx);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit 2c18107b9d58972588cd45d89b8f58d0f033c110 ]
If one of these functions fail, we whould free 'drm', as alreadry done in
the other error handling paths, below and above.
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/df47e03d36c2cf7bc37ec3105fc47c16555bd946.1520885192.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -189,35 +189,43 @@ static int meson_drv_bind_master(struct
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vpu");
regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(regs))
- return PTR_ERR(regs);
+ if (IS_ERR(regs)) {
+ ret = PTR_ERR(regs);
+ goto free_drm;
+ }
priv->io_base = regs;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hhi");
/* Simply ioremap since it may be a shared register zone */
regs = devm_ioremap(dev, res->start, resource_size(res));
- if (!regs)
- return -EADDRNOTAVAIL;
+ if (!regs) {
+ ret = -EADDRNOTAVAIL;
+ goto free_drm;
+ }
priv->hhi = devm_regmap_init_mmio(dev, regs,
&meson_regmap_config);
if (IS_ERR(priv->hhi)) {
dev_err(&pdev->dev, "Couldn't create the HHI regmap\n");
- return PTR_ERR(priv->hhi);
+ ret = PTR_ERR(priv->hhi);
+ goto free_drm;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmc");
/* Simply ioremap since it may be a shared register zone */
regs = devm_ioremap(dev, res->start, resource_size(res));
- if (!regs)
- return -EADDRNOTAVAIL;
+ if (!regs) {
+ ret = -EADDRNOTAVAIL;
+ goto free_drm;
+ }
priv->dmc = devm_regmap_init_mmio(dev, regs,
&meson_regmap_config);
if (IS_ERR(priv->dmc)) {
dev_err(&pdev->dev, "Couldn't create the DMC regmap\n");
- return PTR_ERR(priv->dmc);
+ ret = PTR_ERR(priv->dmc);
+ goto free_drm;
}
priv->vsync_irq = platform_get_irq(pdev, 0);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shawn Lin <[email protected]>
[ Upstream commit a4781c2a74b249cad814ceea7272997bbd20051e ]
It turns out that 5us isn't enough for all cases, so let's
retry some more times to wait for caldone.
Signed-off-by: Shawn Lin <[email protected]>
Tested-by: Ziyuan Xu <[email protected]>
Signed-off-by: Caesar Wang <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/rockchip/phy-rockchip-emmc.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -76,6 +76,10 @@
#define PHYCTRL_OTAPDLYSEL_MASK 0xf
#define PHYCTRL_OTAPDLYSEL_SHIFT 0x7
+#define PHYCTRL_IS_CALDONE(x) \
+ ((((x) >> PHYCTRL_CALDONE_SHIFT) & \
+ PHYCTRL_CALDONE_MASK) == PHYCTRL_CALDONE_DONE)
+
struct rockchip_emmc_phy {
unsigned int reg_offset;
struct regmap *reg_base;
@@ -90,6 +94,7 @@ static int rockchip_emmc_phy_power(struc
unsigned int freqsel = PHYCTRL_FREQSEL_200M;
unsigned long rate;
unsigned long timeout;
+ int ret;
/*
* Keep phyctrl_pdb and phyctrl_endll low to allow
@@ -160,17 +165,19 @@ static int rockchip_emmc_phy_power(struc
PHYCTRL_PDB_SHIFT));
/*
- * According to the user manual, it asks driver to
- * wait 5us for calpad busy trimming
+ * According to the user manual, it asks driver to wait 5us for
+ * calpad busy trimming. However it is documented that this value is
+ * PVT(A.K.A process,voltage and temperature) relevant, so some
+ * failure cases are found which indicates we should be more tolerant
+ * to calpad busy trimming.
*/
- udelay(5);
- regmap_read(rk_phy->reg_base,
- rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
- &caldone);
- caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
- if (caldone != PHYCTRL_CALDONE_DONE) {
- pr_err("rockchip_emmc_phy_power: caldone timeout.\n");
- return -ETIMEDOUT;
+ ret = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
+ caldone, PHYCTRL_IS_CALDONE(caldone),
+ 0, 50);
+ if (ret) {
+ pr_err("%s: caldone failed, ret=%d\n", __func__, ret);
+ return ret;
}
/* Set the frequency of the DLL operation */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Gruenbacher <[email protected]>
[ Upstream commit 174d1232ebc84fcde8f5889d1171c9c7e74a10a7 ]
The chunk size of allocations in __gfs2_fallocate is calculated
incorrectly. The size can collapse, causing __gfs2_fallocate to
allocate one block at a time, which is very inefficient. This needs
fixing in two places:
In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate
that there is no quota limit. This fixes callers that rely on
ap->allowed to be set even when quotas are off.
In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the
loop to make sure that allocation limits from one resource group won't
spill over into another resource group.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/file.c | 5 +++--
fs/gfs2/quota.h | 2 ++
2 files changed, 5 insertions(+), 2 deletions(-)
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -809,7 +809,7 @@ static long __gfs2_fallocate(struct file
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_alloc_parms ap = { .aflags = 0, };
unsigned int data_blocks = 0, ind_blocks = 0, rblocks;
- loff_t bytes, max_bytes, max_blks = UINT_MAX;
+ loff_t bytes, max_bytes, max_blks;
int error;
const loff_t pos = offset;
const loff_t count = len;
@@ -861,7 +861,8 @@ static long __gfs2_fallocate(struct file
return error;
/* ap.allowed tells us how many blocks quota will allow
* us to write. Check if this reduces max_blks */
- if (ap.allowed && ap.allowed < max_blks)
+ max_blks = UINT_MAX;
+ if (ap.allowed)
max_blks = ap.allowed;
error = gfs2_inplace_reserve(ip, &ap);
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -45,6 +45,8 @@ static inline int gfs2_quota_lock_check(
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
int ret;
+
+ ap->allowed = UINT_MAX; /* Assume we are permitted a whole lot */
if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
return 0;
ret = gfs2_quota_lock(ip, NO_UID_QUOTA_CHANGE, NO_GID_QUOTA_CHANGE);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Suman Anna <[email protected]>
[ Upstream commit 5a3a03905a433216f517babd0a343ae7265e9ca1 ]
Commit 95d8b41c765b ("ARM: dts: keystone-k2e-clocks: Add missing unit
name to clock nodes that have regs") fixed the unit names on various
clock nodes but missed out adding the unit address separator on the
clkhyperlink0 clock node. Fix the same.
Fixes: 95d8b41c765b ("ARM: dts: keystone-k2e-clocks: Add missing unit name to clock nodes that have regs")
Signed-off-by: Suman Anna <[email protected]>
Signed-off-by: Santosh Shilimkar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
@@ -42,7 +42,7 @@ clocks {
domain-id = <0>;
};
- clkhyperlink0: clkhyperlink02350030 {
+ clkhyperlink0: clkhyperlink0@2350030 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gregory CLEMENT <[email protected]>
[ Upstream commit 31184d8c6ea49ea0676d100cdd7e1f102ad025b5 ]
The errata FE-8471889 description has been updated. There is still a
timing violation for repeated start. But the errata now states that it
was only the case for the Standard mode (100 kHz), in Fast mode (400 kHz)
there is no issue.
This patch limit the errata fix to the Standard mode.
It has been tesed successfully on the clearfog (Aramda 388 based board).
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-mv64xxx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -845,12 +845,16 @@ mv64xxx_of_config(struct mv64xxx_i2c_dat
*/
if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
drv_data->offload_enabled = true;
- drv_data->errata_delay = true;
+ /* The delay is only needed in standard mode (100kHz) */
+ if (bus_freq <= 100000)
+ drv_data->errata_delay = true;
}
if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
drv_data->offload_enabled = false;
- drv_data->errata_delay = true;
+ /* The delay is only needed in standard mode (100kHz) */
+ if (bus_freq <= 100000)
+ drv_data->errata_delay = true;
}
if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
[ Upstream commit ecb29abd4cb0670c616fb563a078f25d777ce530 ]
A negative page register value means that no page needs to be
selected. This is used by status register read operations and needs
to be accepted. The failure to do so so results in missed status
and limit registers.
Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver")
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/pmbus/adm1275.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -154,7 +154,7 @@ static int adm1275_read_word_data(struct
const struct adm1275_data *data = to_adm1275_data(info);
int ret = 0;
- if (page)
+ if (page > 0)
return -ENXIO;
switch (reg) {
@@ -240,7 +240,7 @@ static int adm1275_write_word_data(struc
const struct adm1275_data *data = to_adm1275_data(info);
int ret;
- if (page)
+ if (page > 0)
return -ENXIO;
switch (reg) {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit a3286f05bc5a5bc7fc73a9783ec89de78fcd07f8 upstream.
In preparation for the following patch which will enhance 'slices'
for supporting PPC32 in order to fix an issue on hugepages on 8xx,
this patch takes out of page*.h all bits related to 'slices' and put
them into newly created slice.h header files.
While common parts go into asm/slice.h, subarch specific
parts go into respective books3s/64/slice.c and nohash/64/slice.c
'slices'
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/book3s/64/slice.h | 27 +++++++++++++
arch/powerpc/include/asm/nohash/64/slice.h | 12 +++++
arch/powerpc/include/asm/page.h | 1
arch/powerpc/include/asm/page_64.h | 59 -----------------------------
arch/powerpc/include/asm/slice.h | 40 +++++++++++++++++++
5 files changed, 80 insertions(+), 59 deletions(-)
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/slice.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_BOOK3S_64_SLICE_H
+#define _ASM_POWERPC_BOOK3S_64_SLICE_H
+
+#ifdef CONFIG_PPC_MM_SLICES
+
+#define SLICE_LOW_SHIFT 28
+#define SLICE_LOW_TOP (0x100000000ul)
+#define SLICE_NUM_LOW (SLICE_LOW_TOP >> SLICE_LOW_SHIFT)
+#define GET_LOW_SLICE_INDEX(addr) ((addr) >> SLICE_LOW_SHIFT)
+
+#define SLICE_HIGH_SHIFT 40
+#define SLICE_NUM_HIGH (H_PGTABLE_RANGE >> SLICE_HIGH_SHIFT)
+#define GET_HIGH_SLICE_INDEX(addr) ((addr) >> SLICE_HIGH_SHIFT)
+
+#else /* CONFIG_PPC_MM_SLICES */
+
+#define get_slice_psize(mm, addr) ((mm)->context.user_psize)
+#define slice_set_user_psize(mm, psize) \
+do { \
+ (mm)->context.user_psize = (psize); \
+ (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
+} while (0)
+
+#endif /* CONFIG_PPC_MM_SLICES */
+
+#endif /* _ASM_POWERPC_BOOK3S_64_SLICE_H */
--- /dev/null
+++ b/arch/powerpc/include/asm/nohash/64/slice.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_NOHASH_64_SLICE_H
+#define _ASM_POWERPC_NOHASH_64_SLICE_H
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define get_slice_psize(mm, addr) MMU_PAGE_64K
+#else /* CONFIG_PPC_64K_PAGES */
+#define get_slice_psize(mm, addr) MMU_PAGE_4K
+#endif /* !CONFIG_PPC_64K_PAGES */
+#define slice_set_user_psize(mm, psize) do { BUG(); } while (0)
+
+#endif /* _ASM_POWERPC_NOHASH_64_SLICE_H */
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -344,5 +344,6 @@ typedef struct page *pgtable_t;
#include <asm-generic/memory_model.h>
#endif /* __ASSEMBLY__ */
+#include <asm/slice.h>
#endif /* _ASM_POWERPC_PAGE_H */
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -86,65 +86,6 @@ extern u64 ppc64_pft_size;
#endif /* __ASSEMBLY__ */
-#ifdef CONFIG_PPC_MM_SLICES
-
-#define SLICE_LOW_SHIFT 28
-#define SLICE_HIGH_SHIFT 40
-
-#define SLICE_LOW_TOP (0x100000000ul)
-#define SLICE_NUM_LOW (SLICE_LOW_TOP >> SLICE_LOW_SHIFT)
-#define SLICE_NUM_HIGH (H_PGTABLE_RANGE >> SLICE_HIGH_SHIFT)
-
-#define GET_LOW_SLICE_INDEX(addr) ((addr) >> SLICE_LOW_SHIFT)
-#define GET_HIGH_SLICE_INDEX(addr) ((addr) >> SLICE_HIGH_SHIFT)
-
-#ifndef __ASSEMBLY__
-struct mm_struct;
-
-extern unsigned long slice_get_unmapped_area(unsigned long addr,
- unsigned long len,
- unsigned long flags,
- unsigned int psize,
- int topdown);
-
-extern unsigned int get_slice_psize(struct mm_struct *mm,
- unsigned long addr);
-
-extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
-extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
- unsigned long len, unsigned int psize);
-
-#endif /* __ASSEMBLY__ */
-#else
-#define slice_init()
-#ifdef CONFIG_PPC_BOOK3S_64
-#define get_slice_psize(mm, addr) ((mm)->context.user_psize)
-#define slice_set_user_psize(mm, psize) \
-do { \
- (mm)->context.user_psize = (psize); \
- (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
-} while (0)
-#else /* !CONFIG_PPC_BOOK3S_64 */
-#ifdef CONFIG_PPC_64K_PAGES
-#define get_slice_psize(mm, addr) MMU_PAGE_64K
-#else /* CONFIG_PPC_64K_PAGES */
-#define get_slice_psize(mm, addr) MMU_PAGE_4K
-#endif /* !CONFIG_PPC_64K_PAGES */
-#define slice_set_user_psize(mm, psize) do { BUG(); } while(0)
-#endif /* CONFIG_PPC_BOOK3S_64 */
-
-#define slice_set_range_psize(mm, start, len, psize) \
- slice_set_user_psize((mm), (psize))
-#endif /* CONFIG_PPC_MM_SLICES */
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#ifdef CONFIG_PPC_MM_SLICES
-#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
-#endif
-
-#endif /* !CONFIG_HUGETLB_PAGE */
-
#define VM_DATA_DEFAULT_FLAGS \
(is_32bit_task() ? \
VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
--- /dev/null
+++ b/arch/powerpc/include/asm/slice.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_SLICE_H
+#define _ASM_POWERPC_SLICE_H
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#include <asm/book3s/64/slice.h>
+#else
+#include <asm/nohash/64/slice.h>
+#endif
+
+#ifdef CONFIG_PPC_MM_SLICES
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+#ifndef __ASSEMBLY__
+
+struct mm_struct;
+
+unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
+ unsigned long flags, unsigned int psize,
+ int topdown);
+
+unsigned int get_slice_psize(struct mm_struct *mm, unsigned long addr);
+
+void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
+void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
+ unsigned long len, unsigned int psize);
+#endif /* __ASSEMBLY__ */
+
+#else /* CONFIG_PPC_MM_SLICES */
+
+#define slice_set_range_psize(mm, start, len, psize) \
+ slice_set_user_psize((mm), (psize))
+#endif /* CONFIG_PPC_MM_SLICES */
+
+#endif /* _ASM_POWERPC_SLICE_H */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pierre Bourdon <[email protected]>
[ Upstream commit 66ec32fc7cd116dab5c02603ea8ec28ff92da3b5 ]
max17042_get_status uses the core power_supply_am_i_supplied. That
function relies on DT properties to figure out the power supply
topology, and will error out without DT.
Fixes max17042 battery status being reported as "unknown".
Signed-off-by: Pierre Bourdon <[email protected]>
Signed-off-by: Andre Heider <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/max17042_battery.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -1053,6 +1053,7 @@ static int max17042_probe(struct i2c_cli
i2c_set_clientdata(client, chip);
psy_cfg.drv_data = chip;
+ psy_cfg.of_node = dev->of_node;
/* When current is not measured,
* CURRENT_NOW and CURRENT_AVG properties should be invisible. */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cornelia Huck <[email protected]>
[ Upstream commit 9851bc77e62499957567e7c39a5beba7d6de6296 ]
vfio-ccw only supports command mode for channel programs, not transport
mode. User space is supposed to already take care of that and pass us
command-mode ORBs only, but better make sure and return an error to
the caller instead of trying to process tcws as ccws.
Reviewed-by: Dong Jia Shi <[email protected]>
Acked-by: Halil Pasic <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/cio/vfio_ccw_fsm.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/s390/cio/vfio_ccw_fsm.c
+++ b/drivers/s390/cio/vfio_ccw_fsm.c
@@ -129,6 +129,11 @@ static void fsm_io_request(struct vfio_c
if (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) {
orb = (union orb *)io_region->orb_area;
+ /* Don't try to build a cp if transport mode is specified. */
+ if (orb->tm.b) {
+ io_region->ret_code = -EOPNOTSUPP;
+ goto err_out;
+ }
io_region->ret_code = cp_init(&private->cp, mdev_dev(mdev),
orb);
if (io_region->ret_code)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chao Yu <[email protected]>
[ Upstream commit bf617f7a92edc6bb2909db2bfa4576f50b280ee5 ]
If noextent_cache mount option is on, we will never initialize extent tree
in inode, but still we're going to access it in f2fs_drop_extent_tree,
result in kernel panic as below:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
IP: _raw_write_lock+0xc/0x30
Call Trace:
? f2fs_drop_extent_tree+0x41/0x70 [f2fs]
f2fs_fallocate+0x5a0/0xdd0 [f2fs]
? common_file_perm+0x47/0xc0
? apparmor_file_permission+0x1a/0x20
vfs_fallocate+0x15b/0x290
SyS_fallocate+0x44/0x70
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
This patch fixes to check extent cache status before using in
f2fs_drop_extent_tree.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/extent_cache.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/f2fs/extent_cache.c
+++ b/fs/f2fs/extent_cache.c
@@ -706,6 +706,9 @@ void f2fs_drop_extent_tree(struct inode
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct extent_tree *et = F2FS_I(inode)->extent_tree;
+ if (!f2fs_may_extent_tree(inode))
+ return;
+
set_inode_flag(inode, FI_NO_EXTENT);
write_lock(&et->lock);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Madalin Bucur <[email protected]>
[ Upstream commit 120d75ecf043044554abbba8507f6d22e4715beb ]
An issue in the code mapping the skb fragments into
scatter-gather frames was evidentiated by netperf
TCP_SENDFILE tests. The size was set wrong for all
fragments but the first, affecting the transmission
of any skb with more than one fragment.
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -1916,8 +1916,10 @@ static int skb_to_sg_fd(struct dpaa_priv
goto csum_failed;
}
+ /* SGT[0] is used by the linear part */
sgt = (struct qm_sg_entry *)(sgt_buf + priv->tx_headroom);
- qm_sg_entry_set_len(&sgt[0], skb_headlen(skb));
+ frag_len = skb_headlen(skb);
+ qm_sg_entry_set_len(&sgt[0], frag_len);
sgt[0].bpid = FSL_DPAA_BPID_INV;
sgt[0].offset = 0;
addr = dma_map_single(dev, skb->data,
@@ -1930,9 +1932,9 @@ static int skb_to_sg_fd(struct dpaa_priv
qm_sg_entry_set64(&sgt[0], addr);
/* populate the rest of SGT entries */
- frag = &skb_shinfo(skb)->frags[0];
- frag_len = frag->size;
- for (i = 1; i <= nr_frags; i++, frag++) {
+ for (i = 0; i < nr_frags; i++) {
+ frag = &skb_shinfo(skb)->frags[i];
+ frag_len = frag->size;
WARN_ON(!skb_frag_page(frag));
addr = skb_frag_dma_map(dev, frag, 0,
frag_len, dma_dir);
@@ -1942,15 +1944,16 @@ static int skb_to_sg_fd(struct dpaa_priv
goto sg_map_failed;
}
- qm_sg_entry_set_len(&sgt[i], frag_len);
- sgt[i].bpid = FSL_DPAA_BPID_INV;
- sgt[i].offset = 0;
+ qm_sg_entry_set_len(&sgt[i + 1], frag_len);
+ sgt[i + 1].bpid = FSL_DPAA_BPID_INV;
+ sgt[i + 1].offset = 0;
/* keep the offset in the address */
- qm_sg_entry_set64(&sgt[i], addr);
- frag_len = frag->size;
+ qm_sg_entry_set64(&sgt[i + 1], addr);
}
- qm_sg_entry_set_f(&sgt[i - 1], frag_len);
+
+ /* Set the final bit in the last used entry of the SGT */
+ qm_sg_entry_set_f(&sgt[nr_frags], frag_len);
qm_fd_set_sg(fd, priv->tx_headroom, skb->len);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergei Shtylyov <[email protected]>
[ Upstream commit a94cf2a614f8bc5b2b33c708626ce695bf71e424 ]
It appears that the single port Ether controllers having TSU (like SH7734/
R8A7740) need the same kind of treating in sh_eth_tsu_init() as R7S72100
currently has -- they also don't have the TSU registers related e.g. to
passing the frames between ports. Add the 'sh_eth_cpu_data::dual_port'
flag and use it as a new criterion for taking a "short path" in the TSU
init sequence in order to avoid writing to the non-existent registers...
Fixes: f0e81fecd4f8 ("net: sh_eth: Add support SH7734")
Fixes: 73a0d907301e ("net: sh_eth: add support R8A7740")
Signed-off-by: Sergei Shtylyov <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/renesas/sh_eth.c | 6 +++++-
drivers/net/ethernet/renesas/sh_eth.h | 1 +
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -763,6 +763,7 @@ static struct sh_eth_cpu_data sh7757_dat
.rpadir = 1,
.rpadir_value = 2 << 16,
.rtrate = 1,
+ .dual_port = 1,
};
#define SH_GIGA_ETH_BASE 0xfee00000UL
@@ -841,6 +842,7 @@ static struct sh_eth_cpu_data sh7757_dat
.no_trimd = 1,
.no_ade = 1,
.tsu = 1,
+ .dual_port = 1,
};
/* SH7734 */
@@ -911,6 +913,7 @@ static struct sh_eth_cpu_data sh7763_dat
.tsu = 1,
.irq_flags = IRQF_SHARED,
.magic = 1,
+ .dual_port = 1,
};
static struct sh_eth_cpu_data sh7619_data = {
@@ -943,6 +946,7 @@ static struct sh_eth_cpu_data sh771x_dat
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tsu = 1,
+ .dual_port = 1,
};
static void sh_eth_set_default_cpu_data(struct sh_eth_cpu_data *cd)
@@ -2932,7 +2936,7 @@ static int sh_eth_vlan_rx_kill_vid(struc
/* SuperH's TSU register init function */
static void sh_eth_tsu_init(struct sh_eth_private *mdp)
{
- if (sh_eth_is_rz_fast_ether(mdp)) {
+ if (!mdp->cd->dual_port) {
sh_eth_tsu_write(mdp, 0, TSU_TEN); /* Disable all CAM entry */
sh_eth_tsu_write(mdp, TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL,
TSU_FWSLC); /* Enable POST registers */
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -509,6 +509,7 @@ struct sh_eth_cpu_data {
unsigned rmiimode:1; /* EtherC has RMIIMODE register */
unsigned rtrate:1; /* EtherC has RTRATE register */
unsigned magic:1; /* EtherC has ECMR.MPDE and ECSR.MPD */
+ unsigned dual_port:1; /* Dual EtherC/E-DMAC */
};
struct sh_eth_private {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergei Shtylyov <[email protected]>
[ Upstream commit 796ceb9269626afaed3b4955c40d2c3d7a8c5d01 ]
According to the latest revisions of the R-Car Gen3 manual, the LVDS mode
must be set before the LVDS I/O pins are enabled, not after -- fix the
Gen3 LVDS startup sequence accordingly.
Fixes: e947eccbeba4 ("drm: rcar-du: Add support for LVDS mode selection")
Signed-off-by: Sergei Shtylyov <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
[Updated comment in rcar_du_lvdsenc_start_gen3()]
[Moved Gen2 startup comment update to separate commit]
[Fixed =| typo]
Tested-by: Laurent Pinchart <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
@@ -95,7 +95,7 @@ static void rcar_du_lvdsenc_start_gen3(s
u32 lvdcr0;
u32 pllcr;
- /* PLL clock configuration */
+ /* Set the PLL clock configuration and LVDS mode. */
if (freq < 42000)
pllcr = LVDPLLCR_PLLDIVCNT_42M;
else if (freq < 85000)
@@ -107,6 +107,9 @@ static void rcar_du_lvdsenc_start_gen3(s
rcar_lvds_write(lvds, LVDPLLCR, pllcr);
+ lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
+ rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
/* Turn all the channels on. */
rcar_lvds_write(lvds, LVDCR1,
LVDCR1_CHSTBY_GEN3(3) | LVDCR1_CHSTBY_GEN3(2) |
@@ -117,7 +120,7 @@ static void rcar_du_lvdsenc_start_gen3(s
* Turn the PLL on, set it to LVDS normal mode, wait for the startup
* delay and turn the output on.
*/
- lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_PLLON;
+ lvdcr0 |= LVDCR0_PLLON;
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
lvdcr0 |= LVDCR0_PWD;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Falcon <[email protected]>
[ Upstream commit 53cc7721fdf12e649994cfb7d8f562acb0e4510b ]
Currently, buffers holding individual queue statistics are allocated
when the device is opened. If an ibmvnic interface is hotplugged or
initialized but never opened, an attempt to get statistics with
ethtool will result in a kernel panic.
Since the driver allocates a constant number, the maximum supported
queues, of buffers, these can be allocated during device probe and
freed when the device is hot-unplugged or the module is removed.
Signed-off-by: Thomas Falcon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -812,8 +812,6 @@ static void release_resources(struct ibm
release_tx_pools(adapter);
release_rx_pools(adapter);
- release_stats_token(adapter);
- release_stats_buffers(adapter);
release_error_buffers(adapter);
if (adapter->napi) {
@@ -953,14 +951,6 @@ static int init_resources(struct ibmvnic
if (rc)
return rc;
- rc = init_stats_buffers(adapter);
- if (rc)
- return rc;
-
- rc = init_stats_token(adapter);
- if (rc)
- return rc;
-
adapter->vpd = kzalloc(sizeof(*adapter->vpd), GFP_KERNEL);
if (!adapter->vpd)
return -ENOMEM;
@@ -4390,6 +4380,14 @@ static int ibmvnic_init(struct ibmvnic_a
release_crq_queue(adapter);
}
+ rc = init_stats_buffers(adapter);
+ if (rc)
+ return rc;
+
+ rc = init_stats_token(adapter);
+ if (rc)
+ return rc;
+
return rc;
}
@@ -4497,6 +4495,9 @@ static int ibmvnic_remove(struct vio_dev
release_sub_crqs(adapter);
release_crq_queue(adapter);
+ release_stats_token(adapter);
+ release_stats_buffers(adapter);
+
adapter->state = VNIC_REMOVED;
mutex_unlock(&adapter->reset_lock);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takeshi Kihara <[email protected]>
[ Upstream commit b418c4609d5052d174668ad6d13efe023c45c595 ]
This patch fixes MOD_SEL1 bit20 and MOD_SEL2 bit20, bit21 pin assignment
for SSI pins group.
This is a correction to the incorrect implementation of MOD_SEL register
pin assignment for R8A7796 SoC specification of R-Car Gen3 Hardware
User's Manual Rev.0.51E or later.
Fixes: f9aece7344bd ("pinctrl: sh-pfc: Initial R8A7796 PFC support")
Signed-off-by: Takeshi Kihara <[email protected]>
Signed-off-by: Ulrich Hecht <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 40 +++++++++++++++++------------------
1 file changed, 20 insertions(+), 20 deletions(-)
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7796.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7796.c
@@ -1,7 +1,7 @@
/*
* R8A7796 processor support - PFC hardware block.
*
- * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
*
* This file is based on the drivers/pinctrl/sh-pfc/pfc-r8a7795.c
*
@@ -477,7 +477,7 @@ FM(IP16_31_28) IP16_31_28 FM(IP17_31_28)
#define MOD_SEL1_26 FM(SEL_TIMER_TMU_0) FM(SEL_TIMER_TMU_1)
#define MOD_SEL1_25_24 FM(SEL_SSP1_1_0) FM(SEL_SSP1_1_1) FM(SEL_SSP1_1_2) FM(SEL_SSP1_1_3)
#define MOD_SEL1_23_22_21 FM(SEL_SSP1_0_0) FM(SEL_SSP1_0_1) FM(SEL_SSP1_0_2) FM(SEL_SSP1_0_3) FM(SEL_SSP1_0_4) F_(0, 0) F_(0, 0) F_(0, 0)
-#define MOD_SEL1_20 FM(SEL_SSI_0) FM(SEL_SSI_1)
+#define MOD_SEL1_20 FM(SEL_SSI1_0) FM(SEL_SSI1_1)
#define MOD_SEL1_19 FM(SEL_SPEED_PULSE_0) FM(SEL_SPEED_PULSE_1)
#define MOD_SEL1_18_17 FM(SEL_SIMCARD_0) FM(SEL_SIMCARD_1) FM(SEL_SIMCARD_2) FM(SEL_SIMCARD_3)
#define MOD_SEL1_16 FM(SEL_SDHI2_0) FM(SEL_SDHI2_1)
@@ -1218,7 +1218,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP13_11_8, HSCK0),
PINMUX_IPSR_MSEL(IP13_11_8, MSIOF1_SCK_D, SEL_MSIOF1_3),
PINMUX_IPSR_MSEL(IP13_11_8, AUDIO_CLKB_A, SEL_ADG_B_0),
- PINMUX_IPSR_MSEL(IP13_11_8, SSI_SDATA1_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP13_11_8, SSI_SDATA1_B, SEL_SSI1_1),
PINMUX_IPSR_MSEL(IP13_11_8, TS_SCK0_D, SEL_TSIF0_3),
PINMUX_IPSR_MSEL(IP13_11_8, STP_ISCLK_0_D, SEL_SSP1_0_3),
PINMUX_IPSR_MSEL(IP13_11_8, RIF0_CLK_C, SEL_DRIF0_2),
@@ -1226,14 +1226,14 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP13_15_12, HRX0),
PINMUX_IPSR_MSEL(IP13_15_12, MSIOF1_RXD_D, SEL_MSIOF1_3),
- PINMUX_IPSR_MSEL(IP13_15_12, SSI_SDATA2_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP13_15_12, SSI_SDATA2_B, SEL_SSI2_1),
PINMUX_IPSR_MSEL(IP13_15_12, TS_SDEN0_D, SEL_TSIF0_3),
PINMUX_IPSR_MSEL(IP13_15_12, STP_ISEN_0_D, SEL_SSP1_0_3),
PINMUX_IPSR_MSEL(IP13_15_12, RIF0_D0_C, SEL_DRIF0_2),
PINMUX_IPSR_GPSR(IP13_19_16, HTX0),
PINMUX_IPSR_MSEL(IP13_19_16, MSIOF1_TXD_D, SEL_MSIOF1_3),
- PINMUX_IPSR_MSEL(IP13_19_16, SSI_SDATA9_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP13_19_16, SSI_SDATA9_B, SEL_SSI9_1),
PINMUX_IPSR_MSEL(IP13_19_16, TS_SDAT0_D, SEL_TSIF0_3),
PINMUX_IPSR_MSEL(IP13_19_16, STP_ISD_0_D, SEL_SSP1_0_3),
PINMUX_IPSR_MSEL(IP13_19_16, RIF0_D1_C, SEL_DRIF0_2),
@@ -1241,7 +1241,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP13_23_20, HCTS0_N),
PINMUX_IPSR_MSEL(IP13_23_20, RX2_B, SEL_SCIF2_1),
PINMUX_IPSR_MSEL(IP13_23_20, MSIOF1_SYNC_D, SEL_MSIOF1_3),
- PINMUX_IPSR_MSEL(IP13_23_20, SSI_SCK9_A, SEL_SSI_0),
+ PINMUX_IPSR_MSEL(IP13_23_20, SSI_SCK9_A, SEL_SSI9_0),
PINMUX_IPSR_MSEL(IP13_23_20, TS_SPSYNC0_D, SEL_TSIF0_3),
PINMUX_IPSR_MSEL(IP13_23_20, STP_ISSYNC_0_D, SEL_SSP1_0_3),
PINMUX_IPSR_MSEL(IP13_23_20, RIF0_SYNC_C, SEL_DRIF0_2),
@@ -1250,7 +1250,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP13_27_24, HRTS0_N),
PINMUX_IPSR_MSEL(IP13_27_24, TX2_B, SEL_SCIF2_1),
PINMUX_IPSR_MSEL(IP13_27_24, MSIOF1_SS1_D, SEL_MSIOF1_3),
- PINMUX_IPSR_MSEL(IP13_27_24, SSI_WS9_A, SEL_SSI_0),
+ PINMUX_IPSR_MSEL(IP13_27_24, SSI_WS9_A, SEL_SSI9_0),
PINMUX_IPSR_MSEL(IP13_27_24, STP_IVCXO27_0_D, SEL_SSP1_0_3),
PINMUX_IPSR_MSEL(IP13_27_24, BPFCLK_A, SEL_FM_0),
PINMUX_IPSR_GPSR(IP13_27_24, AUDIO_CLKOUT2_A),
@@ -1265,7 +1265,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP14_3_0, RX5_A, SEL_SCIF5_0),
PINMUX_IPSR_MSEL(IP14_3_0, NFWP_N_A, SEL_NDF_0),
PINMUX_IPSR_MSEL(IP14_3_0, AUDIO_CLKA_C, SEL_ADG_A_2),
- PINMUX_IPSR_MSEL(IP14_3_0, SSI_SCK2_A, SEL_SSI_0),
+ PINMUX_IPSR_MSEL(IP14_3_0, SSI_SCK2_A, SEL_SSI2_0),
PINMUX_IPSR_MSEL(IP14_3_0, STP_IVCXO27_0_C, SEL_SSP1_0_2),
PINMUX_IPSR_GPSR(IP14_3_0, AUDIO_CLKOUT3_A),
PINMUX_IPSR_MSEL(IP14_3_0, TCLK1_B, SEL_TIMER_TMU_1),
@@ -1274,7 +1274,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP14_7_4, TX5_A, SEL_SCIF5_0),
PINMUX_IPSR_MSEL(IP14_7_4, MSIOF1_SS2_D, SEL_MSIOF1_3),
PINMUX_IPSR_MSEL(IP14_7_4, AUDIO_CLKC_A, SEL_ADG_C_0),
- PINMUX_IPSR_MSEL(IP14_7_4, SSI_WS2_A, SEL_SSI_0),
+ PINMUX_IPSR_MSEL(IP14_7_4, SSI_WS2_A, SEL_SSI2_0),
PINMUX_IPSR_MSEL(IP14_7_4, STP_OPWM_0_D, SEL_SSP1_0_3),
PINMUX_IPSR_GPSR(IP14_7_4, AUDIO_CLKOUT_D),
PINMUX_IPSR_MSEL(IP14_7_4, SPEEDIN_B, SEL_SPEED_PULSE_1),
@@ -1302,10 +1302,10 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP14_31_28, MSIOF1_SS2_F, SEL_MSIOF1_5),
/* IPSR15 */
- PINMUX_IPSR_MSEL(IP15_3_0, SSI_SDATA1_A, SEL_SSI_0),
+ PINMUX_IPSR_MSEL(IP15_3_0, SSI_SDATA1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP15_7_4, SSI_SDATA2_A, SEL_SSI_0),
- PINMUX_IPSR_MSEL(IP15_7_4, SSI_SCK1_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP15_7_4, SSI_SDATA2_A, SEL_SSI2_0),
+ PINMUX_IPSR_MSEL(IP15_7_4, SSI_SCK1_B, SEL_SSI1_1),
PINMUX_IPSR_GPSR(IP15_11_8, SSI_SCK349),
PINMUX_IPSR_MSEL(IP15_11_8, MSIOF1_SS1_A, SEL_MSIOF1_0),
@@ -1391,11 +1391,11 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP16_27_24, RIF1_D1_A, SEL_DRIF1_0),
PINMUX_IPSR_MSEL(IP16_27_24, RIF3_D1_A, SEL_DRIF3_0),
- PINMUX_IPSR_MSEL(IP16_31_28, SSI_SDATA9_A, SEL_SSI_0),
+ PINMUX_IPSR_MSEL(IP16_31_28, SSI_SDATA9_A, SEL_SSI9_0),
PINMUX_IPSR_MSEL(IP16_31_28, HSCK2_B, SEL_HSCIF2_1),
PINMUX_IPSR_MSEL(IP16_31_28, MSIOF1_SS1_C, SEL_MSIOF1_2),
PINMUX_IPSR_MSEL(IP16_31_28, HSCK1_A, SEL_HSCIF1_0),
- PINMUX_IPSR_MSEL(IP16_31_28, SSI_WS1_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP16_31_28, SSI_WS1_B, SEL_SSI1_1),
PINMUX_IPSR_GPSR(IP16_31_28, SCK1),
PINMUX_IPSR_MSEL(IP16_31_28, STP_IVCXO27_1_A, SEL_SSP1_1_0),
PINMUX_IPSR_MSEL(IP16_31_28, SCK5_A, SEL_SCIF5_0),
@@ -1427,7 +1427,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP17_19_16, USB1_PWEN),
PINMUX_IPSR_MSEL(IP17_19_16, SIM0_CLK_C, SEL_SIMCARD_2),
- PINMUX_IPSR_MSEL(IP17_19_16, SSI_SCK1_A, SEL_SSI_0),
+ PINMUX_IPSR_MSEL(IP17_19_16, SSI_SCK1_A, SEL_SSI1_0),
PINMUX_IPSR_MSEL(IP17_19_16, TS_SCK0_E, SEL_TSIF0_4),
PINMUX_IPSR_MSEL(IP17_19_16, STP_ISCLK_0_E, SEL_SSP1_0_4),
PINMUX_IPSR_MSEL(IP17_19_16, FMCLK_B, SEL_FM_1),
@@ -1437,7 +1437,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP17_23_20, USB1_OVC),
PINMUX_IPSR_MSEL(IP17_23_20, MSIOF1_SS2_C, SEL_MSIOF1_2),
- PINMUX_IPSR_MSEL(IP17_23_20, SSI_WS1_A, SEL_SSI_0),
+ PINMUX_IPSR_MSEL(IP17_23_20, SSI_WS1_A, SEL_SSI1_0),
PINMUX_IPSR_MSEL(IP17_23_20, TS_SDAT0_E, SEL_TSIF0_4),
PINMUX_IPSR_MSEL(IP17_23_20, STP_ISD_0_E, SEL_SSP1_0_4),
PINMUX_IPSR_MSEL(IP17_23_20, FMIN_B, SEL_FM_1),
@@ -1447,7 +1447,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP17_27_24, USB30_PWEN),
PINMUX_IPSR_GPSR(IP17_27_24, AUDIO_CLKOUT_B),
- PINMUX_IPSR_MSEL(IP17_27_24, SSI_SCK2_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP17_27_24, SSI_SCK2_B, SEL_SSI2_1),
PINMUX_IPSR_MSEL(IP17_27_24, TS_SDEN1_D, SEL_TSIF1_3),
PINMUX_IPSR_MSEL(IP17_27_24, STP_ISEN_1_D, SEL_SSP1_1_3),
PINMUX_IPSR_MSEL(IP17_27_24, STP_OPWM_0_E, SEL_SSP1_0_4),
@@ -1459,7 +1459,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP17_31_28, USB30_OVC),
PINMUX_IPSR_GPSR(IP17_31_28, AUDIO_CLKOUT1_B),
- PINMUX_IPSR_MSEL(IP17_31_28, SSI_WS2_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP17_31_28, SSI_WS2_B, SEL_SSI2_1),
PINMUX_IPSR_MSEL(IP17_31_28, TS_SPSYNC1_D, SEL_TSIF1_3),
PINMUX_IPSR_MSEL(IP17_31_28, STP_ISSYNC_1_D, SEL_SSP1_1_3),
PINMUX_IPSR_MSEL(IP17_31_28, STP_IVCXO27_0_E, SEL_SSP1_0_4),
@@ -1470,7 +1470,7 @@ static const u16 pinmux_data[] = {
/* IPSR18 */
PINMUX_IPSR_GPSR(IP18_3_0, GP6_30),
PINMUX_IPSR_GPSR(IP18_3_0, AUDIO_CLKOUT2_B),
- PINMUX_IPSR_MSEL(IP18_3_0, SSI_SCK9_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP18_3_0, SSI_SCK9_B, SEL_SSI9_1),
PINMUX_IPSR_MSEL(IP18_3_0, TS_SDEN0_E, SEL_TSIF0_4),
PINMUX_IPSR_MSEL(IP18_3_0, STP_ISEN_0_E, SEL_SSP1_0_4),
PINMUX_IPSR_MSEL(IP18_3_0, RIF2_D0_B, SEL_DRIF2_1),
@@ -1480,7 +1480,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP18_7_4, GP6_31),
PINMUX_IPSR_GPSR(IP18_7_4, AUDIO_CLKOUT3_B),
- PINMUX_IPSR_MSEL(IP18_7_4, SSI_WS9_B, SEL_SSI_1),
+ PINMUX_IPSR_MSEL(IP18_7_4, SSI_WS9_B, SEL_SSI9_1),
PINMUX_IPSR_MSEL(IP18_7_4, TS_SPSYNC0_E, SEL_TSIF0_4),
PINMUX_IPSR_MSEL(IP18_7_4, STP_ISSYNC_0_E, SEL_SSP1_0_4),
PINMUX_IPSR_MSEL(IP18_7_4, RIF2_D1_B, SEL_DRIF2_1),
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ladislav Michl <[email protected]>
[ Upstream commit dde5953f05a89eb63a0d666ffe51d447b2ac3e05 ]
Temperature is measured in tenths of degree Celsius.
Fixes: 085bc24d1553 ("Add LTC2941/LTC2943 Battery Gauge Driver")
Signed-off-by: Ladislav Michl <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/ltc2941-battery-gauge.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/power/supply/ltc2941-battery-gauge.c
+++ b/drivers/power/supply/ltc2941-battery-gauge.c
@@ -317,15 +317,15 @@ static int ltc294x_get_temperature(const
if (info->id == LTC2942_ID) {
reg = LTC2942_REG_TEMPERATURE_MSB;
- value = 60000; /* Full-scale is 600 Kelvin */
+ value = 6000; /* Full-scale is 600 Kelvin */
} else {
reg = LTC2943_REG_TEMPERATURE_MSB;
- value = 51000; /* Full-scale is 510 Kelvin */
+ value = 5100; /* Full-scale is 510 Kelvin */
}
ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
value *= (datar[0] << 8) | datar[1];
- /* Convert to centidegrees */
- *val = value / 0xFFFF - 27215;
+ /* Convert to tenths of degree Celsius */
+ *val = value / 0xFFFF - 2722;
return ret;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 1f5eaa90010ed7cf0ae90a526c48657d02c6086f ]
Fanotify queues of unlimited length do not expect events can be lost.
Since these queues are used for system auditing and other security
related tasks, loosing events can even have security implications.
Currently, since the allocation is small (32-bytes), it cannot fail
however when we start accounting events in memcgs, allocation can start
failing. So avoid loosing events due to failure to allocate memory by
making event allocation use __GFP_NOFAIL.
Reviewed-by: Amir Goldstein <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/notify/fanotify/fanotify.c | 19 ++++++++++++++-----
fs/notify/fanotify/fanotify.h | 3 ++-
fs/notify/fanotify/fanotify_user.c | 2 +-
3 files changed, 17 insertions(+), 7 deletions(-)
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -135,23 +135,32 @@ static bool fanotify_should_send_event(s
return false;
}
-struct fanotify_event_info *fanotify_alloc_event(struct inode *inode, u32 mask,
+struct fanotify_event_info *fanotify_alloc_event(struct fsnotify_group *group,
+ struct inode *inode, u32 mask,
const struct path *path)
{
struct fanotify_event_info *event;
+ gfp_t gfp = GFP_KERNEL;
+
+ /*
+ * For queues with unlimited length lost events are not expected and
+ * can possibly have security implications. Avoid losing events when
+ * memory is short.
+ */
+ if (group->max_events == UINT_MAX)
+ gfp |= __GFP_NOFAIL;
if (fanotify_is_perm_event(mask)) {
struct fanotify_perm_event_info *pevent;
- pevent = kmem_cache_alloc(fanotify_perm_event_cachep,
- GFP_KERNEL);
+ pevent = kmem_cache_alloc(fanotify_perm_event_cachep, gfp);
if (!pevent)
return NULL;
event = &pevent->fae;
pevent->response = 0;
goto init;
}
- event = kmem_cache_alloc(fanotify_event_cachep, GFP_KERNEL);
+ event = kmem_cache_alloc(fanotify_event_cachep, gfp);
if (!event)
return NULL;
init: __maybe_unused
@@ -206,7 +215,7 @@ static int fanotify_handle_event(struct
return 0;
}
- event = fanotify_alloc_event(inode, mask, data);
+ event = fanotify_alloc_event(group, inode, mask, data);
ret = -ENOMEM;
if (unlikely(!event))
goto finish;
--- a/fs/notify/fanotify/fanotify.h
+++ b/fs/notify/fanotify/fanotify.h
@@ -52,5 +52,6 @@ static inline struct fanotify_event_info
return container_of(fse, struct fanotify_event_info, fse);
}
-struct fanotify_event_info *fanotify_alloc_event(struct inode *inode, u32 mask,
+struct fanotify_event_info *fanotify_alloc_event(struct fsnotify_group *group,
+ struct inode *inode, u32 mask,
const struct path *path);
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -757,7 +757,7 @@ SYSCALL_DEFINE2(fanotify_init, unsigned
group->fanotify_data.user = user;
atomic_inc(&user->fanotify_listeners);
- oevent = fanotify_alloc_event(NULL, FS_Q_OVERFLOW, NULL);
+ oevent = fanotify_alloc_event(group, NULL, FS_Q_OVERFLOW, NULL);
if (unlikely(!oevent)) {
fd = -ENOMEM;
goto out_destroy_group;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa <[email protected]>
[ Upstream commit e3ebaa465136ecfedf9c6f4671df02bf625f8125 ]
Jin Yao reported memory corrupton in perf report with
branch info used for stack trace:
> Following command lines will cause perf crash.
> perf record -j call -g -a <application>
> perf report --branch-history
>
> *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 ***
> ======= Backtrace: =========
> /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725]
> /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a]
> /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc]
> perf[0x51b914]
> perf(hist_entry_iter__add+0x1e5)[0x51f305]
> perf[0x43cf01]
> perf[0x4fa3bf]
> perf[0x4fa923]
> perf[0x4fd396]
> perf[0x4f9614]
> perf(perf_session__process_events+0x89e)[0x4fc38e]
> perf(cmd_report+0x15d2)[0x43f202]
> perf[0x4a059f]
> perf(main+0x631)[0x427b71]
> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830]
> perf(_start+0x29)[0x427d89]
For the cumulative output, we allocate the he_cache array based on the
--max-stack option value and populate it with data from 'callchain_cursor'.
The --max-stack option value does not ensure now the limit for number of
callchain_cursor nodes, so the cumulative iter code will allocate smaller array
than it's actually needed and cause above corruption.
I think the --max-stack limit does not apply here anyway, because we add
callchain data as normal hist entries, while the --max-stack control the limit
of single entry callchain depth.
Using the callchain_cursor.nr as he_cache array count to fix this. Also
removing struct hist_entry_iter::max_stack, because there's no longer any use
for it.
We need more fixes to ensure that the branch stack code follows properly the
logic of --max-stack, which is not the case at the moment.
Original-patch-by: Jin Yao <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Reported-by: Jin Yao <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20180216123619.GA9945@krava
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/hist.c | 4 +---
tools/perf/util/hist.h | 1 -
2 files changed, 1 insertion(+), 4 deletions(-)
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -879,7 +879,7 @@ iter_prepare_cumulative_entry(struct his
* cumulated only one time to prevent entries more than 100%
* overhead.
*/
- he_cache = malloc(sizeof(*he_cache) * (iter->max_stack + 1));
+ he_cache = malloc(sizeof(*he_cache) * (callchain_cursor.nr + 1));
if (he_cache == NULL)
return -ENOMEM;
@@ -1045,8 +1045,6 @@ int hist_entry_iter__add(struct hist_ent
if (err)
return err;
- iter->max_stack = max_stack_depth;
-
err = iter->ops->prepare_entry(iter, al);
if (err)
goto out;
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -107,7 +107,6 @@ struct hist_entry_iter {
int curr;
bool hide_unresolved;
- int max_stack;
struct perf_evsel *evsel;
struct perf_sample *sample;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa <[email protected]>
[ Upstream commit ab6e9a99345131cd8e54268d1d0dc04a33f7ed11 ]
The symbol search called by machine__find_kernel_symbol_by_name is using
internally arch__compare_symbol_names function to compare 2 symbol
names, because different archs have different ways of comparing symbols.
Mostly for skipping '.' prefixes and similar.
In test 1 when we try to find matching symbols in kallsyms and vmlinux,
by address and by symbol name. When either is found we compare the pair
symbol names by simple strcmp, which is not good enough for reasons
explained in previous paragraph.
On powerpc this can cause lockup, because even thought we found the
pair, the compared names are different and don't match simple strcmp.
Following code path is executed, that leads to lockup:
- we find the pair in kallsyms by sym->start
next_pair:
- we compare the names and it fails
- we find the pair by sym->name
- the pair addresses match so we call goto next_pair
because we assume the names match in this case
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Naveen N. Rao <[email protected]>
Acked-by: Naveen N. Rao <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Fixes: 031b84c407c3 ("perf probe ppc: Enable matching against dot symbols automatically")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/tests/vmlinux-kallsyms.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/tests/vmlinux-kallsyms.c
+++ b/tools/perf/tests/vmlinux-kallsyms.c
@@ -125,7 +125,7 @@ int test__vmlinux_matches_kallsyms(struc
if (pair && UM(pair->start) == mem_start) {
next_pair:
- if (strcmp(sym->name, pair->name) == 0) {
+ if (arch__compare_symbol_names(sym->name, pair->name) == 0) {
/*
* kallsyms don't have the symbol end, so we
* set that by using the next symbol start - 1,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap <[email protected]>
[ Upstream commit 1e0ce03bf142454f38a5fc050bf4fd698d2d36d8 ]
The "mdr" command should repeat (continue) when only Enter/Return
is pressed, so make it do so.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Daniel Thompson <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: [email protected]
Signed-off-by: Jason Wessel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/debug/kdb/kdb_main.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -1566,6 +1566,7 @@ static int kdb_md(int argc, const char *
int symbolic = 0;
int valid = 0;
int phys = 0;
+ int raw = 0;
kdbgetintenv("MDCOUNT", &mdcount);
kdbgetintenv("RADIX", &radix);
@@ -1575,9 +1576,10 @@ static int kdb_md(int argc, const char *
repeat = mdcount * 16 / bytesperword;
if (strcmp(argv[0], "mdr") == 0) {
- if (argc != 2)
+ if (argc == 2 || (argc == 0 && last_addr != 0))
+ valid = raw = 1;
+ else
return KDB_ARGCOUNT;
- valid = 1;
} else if (isdigit(argv[0][2])) {
bytesperword = (int)(argv[0][2] - '0');
if (bytesperword == 0) {
@@ -1613,7 +1615,10 @@ static int kdb_md(int argc, const char *
radix = last_radix;
bytesperword = last_bytesperword;
repeat = last_repeat;
- mdcount = ((repeat * bytesperword) + 15) / 16;
+ if (raw)
+ mdcount = repeat;
+ else
+ mdcount = ((repeat * bytesperword) + 15) / 16;
}
if (argc) {
@@ -1630,7 +1635,10 @@ static int kdb_md(int argc, const char *
diag = kdbgetularg(argv[nextarg], &val);
if (!diag) {
mdcount = (int) val;
- repeat = mdcount * 16 / bytesperword;
+ if (raw)
+ repeat = mdcount;
+ else
+ repeat = mdcount * 16 / bytesperword;
}
}
if (argc >= nextarg+1) {
@@ -1640,8 +1648,15 @@ static int kdb_md(int argc, const char *
}
}
- if (strcmp(argv[0], "mdr") == 0)
- return kdb_mdr(addr, mdcount);
+ if (strcmp(argv[0], "mdr") == 0) {
+ int ret;
+ last_addr = addr;
+ ret = kdb_mdr(addr, mdcount);
+ last_addr += mdcount;
+ last_repeat = mdcount;
+ last_bytesperword = bytesperword; // to make REPEAT happy
+ return ret;
+ }
switch (radix) {
case 10:
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Wahren <[email protected]>
[ Upstream commit 7b4c5d30d0bd2b22c09d4d993a76e0973a873891 ]
In case the probe of the clock is deferred, we would assume it is
optional. This is wrong, so defer the probe of this driver until
the clock is available.
Fixes: 791af4f4907a ("hwrng: bcm2835 - Manage an optional clock")
Signed-off-by: Stefan Wahren <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/hw_random/bcm2835-rng.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -163,6 +163,8 @@ static int bcm2835_rng_probe(struct plat
/* Clock is optional on most platforms */
priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk) && PTR_ERR(priv->clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
priv->rng.name = pdev->name;
priv->rng.init = bcm2835_rng_init;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <[email protected]>
[ Upstream commit d4b78db6ac3e084e2bdc57d5518bd247c727f396 ]
The HDMI encoder is connected to the RGB output of the DU, which is
port@0, not port@1. Fix the incorrect DT description.
Fixes: c5af8a4248d3 ("ARM: dts: porter: add DU DT support")
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/r8a7791-porter.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -425,7 +425,7 @@
"dclkin.0", "dclkin.1";
ports {
- port@1 {
+ port@0 {
endpoint {
remote-endpoint = <&adv7511_in>;
};
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Cassel <[email protected]>
[ Upstream commit 13138de01400762f706c5e956e70660770d61962 ]
stmmac_mac_config_rx_queues_routing() incorrectly calls rx_queue_prio()
instead of rx_queue_routing().
This looks like a copy paste issue, since
stmmac_mac_config_rx_queues_prio() already calls rx_queue_prio(),
and both stmmac_mac_config_rx_queues_routing() and
stmmac_mac_config_rx_queues_prio() are very similar in structure.
Fixes: abe80fdc6ee6 ("net: stmmac: RX queue routing configuration")
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2435,7 +2435,7 @@ static void stmmac_mac_config_rx_queues_
continue;
packet = priv->plat->rx_queues_cfg[queue].pkt_route;
- priv->hw->mac->rx_queue_prio(priv->hw, packet, queue);
+ priv->hw->mac->rx_queue_routing(priv->hw, packet, queue);
}
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
[ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ]
The base of the TLMM gpiochip should not be statically defined as 0, fix
this to not artificially restrict the existence of multiple pinctrl-msm
devices.
Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Reported-by: Timur Tabi <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -818,7 +818,7 @@ static int msm_gpio_init(struct msm_pinc
return -EINVAL;
chip = &pctrl->chip;
- chip->base = 0;
+ chip->base = -1;
chip->ngpio = ngpio;
chip->label = dev_name(pctrl->dev);
chip->parent = pctrl->dev;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Deepak Rawat <[email protected]>
commit 91ba9f28a3de97761c2b5fd5df5d88421268e507 upstream.
SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO
(and not call a new vmw_dmabuf_init) when a new fb size is same as
current fb. This was changed in a recent commit which is causing
page_flip to fail on VM with low display memory and multi-mon failure
when cycle monitors from secondary display.
Cc: <[email protected]> # 4.14, 4.16
Fixes: 20fb5a635a0c ("drm/vmwgfx: Unpin the screen object backup buffer when not used")
Signed-off-by: Deepak Rawat <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
@@ -530,6 +530,8 @@ vmw_sou_primary_plane_prepare_fb(struct
return ret;
}
+ vps->dmabuf_size = size;
+
/*
* TTM already thinks the buffer is pinned, but make sure the
* pin_count is upped.
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit 30966861a7a2051457be8c49466887d78cc47e97 ]
If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must
release the reference on the current 'child' node before returning.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/of_regulator.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -321,6 +321,7 @@ int of_regulator_match(struct device *de
dev_err(dev,
"failed to parse DT for regulator %s\n",
child->name);
+ of_node_put(child);
return -EINVAL;
}
match->of_node = of_node_get(child);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rafael J. Wysocki" <[email protected]>
[ Upstream commit dbdd0f58fd2cdde5cf945c9da67a2d52d32ba550 ]
There is a problem with PCMCIA system resume callbacks with respect
to suspend-to-idle in which the ->suspend_noirq() callback may be
invoked after the ->resume_noirq() one without resuming the system
entirely in some cases. This doesn't work for PCMCIA because of
the lack of symmetry between its system suspend and system resume
"noirq" callbacks.
The system resume handling in PCMCIA is split between
socket_early_resume() and socket_late_resume() which are called in
different phases of system resume and both need to run for
socket_suspend() (invoked by the system suspend "noirq" callback)
to work. Specifically, socket_suspend() returns an error when
called after socket_early_resume() without socket_late_resume(),
so if the suspend-to-idle core detects a spurious wakeup event and
attempts to put the system back to sleep, that is aborted by the
error coming from socket_suspend().
Avoid that by using a new socket state flag, SOCKET_IN_RESUME,
to indicate that socket_early_resume() has already run for the
socket in which case socket_suspend() will do minimum handling
and return 0.
This change has been tested on my venerable Toshiba Portege R500
(which is where the problem has been discovered in the first place),
but admittedly I have no PCMCIA cards to test along with the socket
itself.
Fixes: 33e4f80ee69b (ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <[email protected]>
[[email protected]: follow same codepaths for both suspend variants; call ->suspend()]
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pcmcia/cs.c | 10 +++++++---
drivers/pcmcia/cs_internal.h | 1 +
2 files changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -452,17 +452,20 @@ static int socket_insert(struct pcmcia_s
static int socket_suspend(struct pcmcia_socket *skt)
{
- if (skt->state & SOCKET_SUSPEND)
+ if ((skt->state & SOCKET_SUSPEND) && !(skt->state & SOCKET_IN_RESUME))
return -EBUSY;
mutex_lock(&skt->ops_mutex);
- skt->suspended_state = skt->state;
+ /* store state on first suspend, but not after spurious wakeups */
+ if (!(skt->state & SOCKET_IN_RESUME))
+ skt->suspended_state = skt->state;
skt->socket = dead_socket;
skt->ops->set_socket(skt, &skt->socket);
if (skt->ops->suspend)
skt->ops->suspend(skt);
skt->state |= SOCKET_SUSPEND;
+ skt->state &= ~SOCKET_IN_RESUME;
mutex_unlock(&skt->ops_mutex);
return 0;
}
@@ -475,6 +478,7 @@ static int socket_early_resume(struct pc
skt->ops->set_socket(skt, &skt->socket);
if (skt->state & SOCKET_PRESENT)
skt->resume_status = socket_setup(skt, resume_delay);
+ skt->state |= SOCKET_IN_RESUME;
mutex_unlock(&skt->ops_mutex);
return 0;
}
@@ -484,7 +488,7 @@ static int socket_late_resume(struct pcm
int ret = 0;
mutex_lock(&skt->ops_mutex);
- skt->state &= ~SOCKET_SUSPEND;
+ skt->state &= ~(SOCKET_SUSPEND | SOCKET_IN_RESUME);
mutex_unlock(&skt->ops_mutex);
if (!(skt->state & SOCKET_PRESENT)) {
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -70,6 +70,7 @@ struct pccard_resource_ops {
/* Flags in socket state */
#define SOCKET_PRESENT 0x0008
#define SOCKET_INUSE 0x0010
+#define SOCKET_IN_RESUME 0x0040
#define SOCKET_SUSPEND 0x0080
#define SOCKET_WIN_REQ(i) (0x0100<<(i))
#define SOCKET_CARDBUS 0x8000
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Henry Zhang <[email protected]>
[ Upstream commit 1a012cb2569f2031b3636232c3ab21c20c92d281 ]
BCM2835 ARM Peripherals doc shows gpio pins 4, 5, 6, 12 and 13
carry altenate function, ALT5 for ARM JTAG
Fixes: 21ff843931b2 ("ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.")
Signed-off-by: Henry Zhang <[email protected]>
Acked-by: Stefan Wahren <[email protected]>
Signed-off-by: Eric Anholt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/bcm283x.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -252,7 +252,7 @@
jtag_gpio4: jtag_gpio4 {
brcm,pins = <4 5 6 12 13>;
- brcm,function = <BCM2835_FSEL_ALT4>;
+ brcm,function = <BCM2835_FSEL_ALT5>;
};
jtag_gpio22: jtag_gpio22 {
brcm,pins = <22 23 24 25 26 27>;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit 87f88732d25e6175cb4faa8070658f604660d720 ]
When operating the system headless headless, the domain is never
powered on, leaving the clocks disabled. The shutdown function then
tries to disable the already disabled clocks, resulting in errors.
Therefore call meson_gx_pwrc_vpu_power_off() only if domain is
powered on.
This patch fixes the described issue on my system (Odorid-C2).
Fixes: 339cd0ea0822 "soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader"
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Kevin Hilman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soc/amlogic/meson-gx-pwrc-vpu.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/soc/amlogic/meson-gx-pwrc-vpu.c
+++ b/drivers/soc/amlogic/meson-gx-pwrc-vpu.c
@@ -224,7 +224,11 @@ static int meson_gx_pwrc_vpu_probe(struc
static void meson_gx_pwrc_vpu_shutdown(struct platform_device *pdev)
{
- meson_gx_pwrc_vpu_power_off(&vpu_hdmi_pd.genpd);
+ bool powered_off;
+
+ powered_off = meson_gx_pwrc_vpu_get_power(&vpu_hdmi_pd);
+ if (!powered_off)
+ meson_gx_pwrc_vpu_power_off(&vpu_hdmi_pd.genpd);
}
static const struct of_device_id meson_gx_pwrc_vpu_match_table[] = {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Guy Briggs <[email protected]>
[ Upstream commit 23138ead270045f1b3e912e667967b6094244999 ]
If there is a memory allocation error when trying to change an audit
kernel feature value, the ignored allocation error will trigger a NULL
pointer dereference oops on subsequent use of that pointer. Return
instead.
Passes audit-testsuite.
See: https://github.com/linux-audit/audit-kernel/issues/76
Signed-off-by: Richard Guy Briggs <[email protected]>
[PM: not necessary (other funcs check for NULL), but a good practice]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/audit.c | 2 ++
1 file changed, 2 insertions(+)
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1058,6 +1058,8 @@ static void audit_log_feature_change(int
return;
ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_FEATURE_CHANGE);
+ if (!ab)
+ return;
audit_log_task_info(ab, current);
audit_log_format(ab, " feature=%s old=%u new=%u old_lock=%u new_lock=%u res=%d",
audit_feature_names[which], !!old_feature, !!new_feature,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filip Sadowski <[email protected]>
[ Upstream commit 1fa51a650e1deb50410677f1bd6c0ce17aa48a49 ]
This patch adds necessary delay for 4.33 firmware to recover after
EMP reset. Without this patch driver occasionally reinitializes
structures too quickly to communicate with firmware after EMP reset
causing AdminQ to timeout.
Signed-off-by: Filip Sadowski <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9215,6 +9215,17 @@ static void i40e_rebuild(struct i40e_pf
}
i40e_get_oem_version(&pf->hw);
+ if (test_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state) &&
+ ((hw->aq.fw_maj_ver == 4 && hw->aq.fw_min_ver <= 33) ||
+ hw->aq.fw_maj_ver < 4) && hw->mac.type == I40E_MAC_XL710) {
+ /* The following delay is necessary for 4.33 firmware and older
+ * to recover after EMP reset. 200 ms should suffice but we
+ * put here 300 ms to be sure that FW is ready to operate
+ * after reset.
+ */
+ mdelay(300);
+ }
+
/* re-verify the eeprom if we just had an EMP reset */
if (test_and_clear_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state))
i40e_verify_eeprom(pf);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Rosin <[email protected]>
[ Upstream commit 7981190fb5dd710dea08c2613cee3d05e795ca5e ]
The used part does contain an eeprom compatible with an Atmel 24c02
chip and it is from NXP, but it is not called 24c02. It's actually a
se97b chip. Adjust the compatible accordingly.
Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/at91-tse850-3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -246,7 +246,7 @@
};
eeprom@50 {
- compatible = "nxp,24c02", "atmel,24c02";
+ compatible = "nxp,se97b", "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Wahren <[email protected]>
[ Upstream commit 79c81facdc0b43b1cef37b8d5689a8c8b78f8be0 ]
Since 517e7a1537a ("ASoC: bcm2835: move to use the clock framework")
the bcm2835-i2s requires a clock as DT property. Unfortunately
the necessary DT change has never been applied. While we are at it
also fix the first PCM register range to cover the PCM_GRAY register.
Fixes: 517e7a1537a ("ASoC: bcm2835: move to use the clock framework")
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Tested-by: Matthias Reichl <[email protected]>
Signed-off-by: Eric Anholt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/bcm283x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -397,8 +397,8 @@
i2s: i2s@7e203000 {
compatible = "brcm,bcm2835-i2s";
- reg = <0x7e203000 0x20>,
- <0x7e101098 0x02>;
+ reg = <0x7e203000 0x24>;
+ clocks = <&clocks BCM2835_CLOCK_PCM>;
dmas = <&dma 2>,
<&dma 3>;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Charles Keepax <[email protected]>
[ Upstream commit 71df179363a5a733a8932e9afb869760d7559383 ]
The cache pointer points to the actual memory used by the cache, as the
comparison here is looking for the type of the cache it should check
against cache_type.
Fixes: 1ea975cf1ef5 ("regmap: Add a function to check if a regmap register is cached")
Signed-off-by: Charles Keepax <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/regmap/regmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -99,7 +99,7 @@ bool regmap_cached(struct regmap *map, u
int ret;
unsigned int val;
- if (map->cache == REGCACHE_NONE)
+ if (map->cache_type == REGCACHE_NONE)
return false;
if (!map->cache_ops)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aapo Vienamo <[email protected]>
[ Upstream commit 2bada7ac1fdcbf79a9689bd2ff65fa515ca7a31f ]
The missing last digit of the CONFIG values is added. Looks like a typo
of some sort when comparing to the downstream dt. This fixes
intermittent behavior behaviour of the ethernet controllers.
Signed-off-by: Aapo Vienamo <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 52 ++++++++++++++++----------------
1 file changed, 26 insertions(+), 26 deletions(-)
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -213,37 +213,37 @@
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
- MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
- MX7D_PAD_SD2_WP__ENET1_MDC 0x3
- MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
- MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
- MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
- MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
- MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
- MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
- MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
- MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
- MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
- MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
- MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
- MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x30
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x30
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x11
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x11
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x11
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x11
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x11
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x11
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x11
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x11
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
- MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
- MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
- MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
- MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
- MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
- MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
- MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
- MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
- MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
- MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
- MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
- MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x11
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x11
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x11
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x11
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x11
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x11
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x11
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x11
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x11
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x11
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x11
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x11
>;
};
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Rosin <[email protected]>
[ Upstream commit 6b65933008a6bbe5ff79a344b41175826848682d ]
The used part does contain an eeprom compatible with an Atmel 24c02
chip and it is from NXP, but it is not called 24c02. It's actually a
se97b chip. Adjust the compatible accordingly.
Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -146,7 +146,7 @@
};
eeprom@50 {
- compatible = "nxp,24c02";
+ compatible = "nxp,se97b", "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Chinner <[email protected]>
commit 79f546a696bff2590169fb5684e23d65f4d9f591 upstream.
We recently had an oops reported on a 4.14 kernel in
xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage
and so the m_perag_tree lookup walked into lala land. It produces
an oops down this path during the failed mount:
radix_tree_gang_lookup_tag+0xc4/0x130
xfs_perag_get_tag+0x37/0xf0
xfs_reclaim_inodes_count+0x32/0x40
xfs_fs_nr_cached_objects+0x11/0x20
super_cache_count+0x35/0xc0
shrink_slab.part.66+0xb1/0x370
shrink_node+0x7e/0x1a0
try_to_free_pages+0x199/0x470
__alloc_pages_slowpath+0x3a1/0xd20
__alloc_pages_nodemask+0x1c3/0x200
cache_grow_begin+0x20b/0x2e0
fallback_alloc+0x160/0x200
kmem_cache_alloc+0x111/0x4e0
The problem is that the superblock shrinker is running before the
filesystem structures it depends on have been fully set up. i.e.
the shrinker is registered in sget(), before ->fill_super() has been
called, and the shrinker can call into the filesystem before
fill_super() does it's setup work. Essentially we are exposed to
both use-after-free and use-before-initialisation bugs here.
To fix this, add a check for the SB_BORN flag in super_cache_count.
In general, this flag is not set until ->fs_mount() completes
successfully, so we know that it is set after the filesystem
setup has completed. This matches the trylock_super() behaviour
which will not let super_cache_scan() run if SB_BORN is not set, and
hence will not allow the superblock shrinker from entering the
filesystem while it is being set up or after it has failed setup
and is being torn down.
Cc: [email protected]
Signed-Off-By: Dave Chinner <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/super.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)
--- a/fs/super.c
+++ b/fs/super.c
@@ -120,13 +120,23 @@ static unsigned long super_cache_count(s
sb = container_of(shrink, struct super_block, s_shrink);
/*
- * Don't call trylock_super as it is a potential
- * scalability bottleneck. The counts could get updated
- * between super_cache_count and super_cache_scan anyway.
- * Call to super_cache_count with shrinker_rwsem held
- * ensures the safety of call to list_lru_shrink_count() and
- * s_op->nr_cached_objects().
+ * We don't call trylock_super() here as it is a scalability bottleneck,
+ * so we're exposed to partial setup state. The shrinker rwsem does not
+ * protect filesystem operations backing list_lru_shrink_count() or
+ * s_op->nr_cached_objects(). Counts can change between
+ * super_cache_count and super_cache_scan, so we really don't need locks
+ * here.
+ *
+ * However, if we are currently mounting the superblock, the underlying
+ * filesystem might be in a state of partial construction and hence it
+ * is dangerous to access it. trylock_super() uses a SB_BORN check to
+ * avoid this situation, so do the same here. The memory barrier is
+ * matched with the one in mount_fs() as we don't hold locks here.
*/
+ if (!(sb->s_flags & SB_BORN))
+ return 0;
+ smp_rmb();
+
if (sb->s_op && sb->s_op->nr_cached_objects)
total_objects = sb->s_op->nr_cached_objects(sb, sc);
@@ -1226,6 +1236,14 @@ mount_fs(struct file_system_type *type,
sb = root->d_sb;
BUG_ON(!sb);
WARN_ON(!sb->s_bdi);
+
+ /*
+ * Write barrier is for super_cache_count(). We place it before setting
+ * SB_BORN as the data dependency between the two functions is the
+ * superblock structure contents that we just set up, not the SB_BORN
+ * flag.
+ */
+ smp_wmb();
sb->s_flags |= SB_BORN;
error = security_sb_kern_mount(sb, flags, secdata);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergei Shtylyov <[email protected]>
[ Upstream commit 8525d04ba8a6a9ecfa4bd619c988ca873a5fc2a4 ]
According to the latest revision 2.00 of the R-Car Gen2 manual, the LVDS
and the bias circuit must be enabled after the LVDS I/O pins are
enabled, not before. Fix the Gen2 LVDS startup sequence accordingly.
While at it, also fix the comment preceding the first LVDCR0 write that
still talks about hardcoding the LVDS mode 0.
Fixes: 90374b5c25c9 ("drm/rcar-du: Add internal LVDS encoder support")
Signed-off-by: Sergei Shtylyov <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Tested-by: Laurent Pinchart <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
@@ -59,11 +59,8 @@ static void rcar_du_lvdsenc_start_gen2(s
rcar_lvds_write(lvds, LVDPLLCR, pllcr);
- /*
- * Select the input, hardcode mode 0, enable LVDS operation and turn
- * bias circuitry on.
- */
- lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_BEN | LVDCR0_LVEN;
+ /* Select the input and set the LVDS mode. */
+ lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
if (rcrtc->index == 2)
lvdcr0 |= LVDCR0_DUSEL;
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
@@ -74,6 +71,10 @@ static void rcar_du_lvdsenc_start_gen2(s
LVDCR1_CHSTBY_GEN2(1) | LVDCR1_CHSTBY_GEN2(0) |
LVDCR1_CLKSTBY_GEN2);
+ /* Enable LVDS operation and turn bias circuitry on. */
+ lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN;
+ rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
/*
* Turn the PLL on, wait for the startup delay, and turn the output
* on.
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Prashant Bhole <[email protected]>
[ Upstream commit ddd0010392d9cbcb95b53d11b7cafc67b373ab56 ]
eBPF test fails due to verifier failure because log_buf is too small.
Fixed by increasing log_buf size
Signed-off-by: Prashant Bhole <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/net/psock_fanout.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/tools/testing/selftests/net/psock_fanout.c
+++ b/tools/testing/selftests/net/psock_fanout.c
@@ -128,6 +128,8 @@ static void sock_fanout_getopts(int fd,
static void sock_fanout_set_ebpf(int fd)
{
+ static char log_buf[65536];
+
const int len_off = __builtin_offsetof(struct __sk_buff, len);
struct bpf_insn prog[] = {
{ BPF_ALU64 | BPF_MOV | BPF_X, 6, 1, 0, 0 },
@@ -140,7 +142,6 @@ static void sock_fanout_set_ebpf(int fd)
{ BPF_ALU | BPF_MOV | BPF_K, 0, 0, 0, 0 },
{ BPF_JMP | BPF_EXIT, 0, 0, 0, 0 }
};
- char log_buf[512];
union bpf_attr attr;
int pfd;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Haines <[email protected]>
[ Upstream commit 213d7f94775322ba44e0bbb55ec6946e9de88cea ]
When resolving a fallback label, check the sk_buff version as it
is possible (e.g. SCTP) to have family = PF_INET6 while
receiving ip_hdr(skb)->version = 4.
Signed-off-by: Richard Haines <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netlabel/netlabel_unlabeled.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -1472,6 +1472,16 @@ int netlbl_unlabel_getattr(const struct
iface = rcu_dereference(netlbl_unlhsh_def);
if (iface == NULL || !iface->valid)
goto unlabel_getattr_nolabel;
+
+#if IS_ENABLED(CONFIG_IPV6)
+ /* When resolving a fallback label, check the sk_buff version as
+ * it is possible (e.g. SCTP) to have family = PF_INET6 while
+ * receiving ip_hdr(skb)->version = 4.
+ */
+ if (family == PF_INET6 && ip_hdr(skb)->version == 4)
+ family = PF_INET;
+#endif /* IPv6 */
+
switch (family) {
case PF_INET: {
struct iphdr *hdr4;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa <[email protected]>
[ Upstream commit fdf7c49c200d1b9909e2204cec5bd68b48605c71 ]
When we strip the perf binary, dwarf unwind test stop
to work. The reason is that strip will remove static
function symbols, which we need to check for unwind.
This change will keep this test working in cases where
the global symbols are put into dynamic symbol table,
which is the case on x86. It still won't work on powerpc.
Making those 5 local functions global, and adding
'test_dwarf_unwind__' to their names.
Committer testing:
Before:
# perf test dwarf
58: DWARF unwind : Ok
# strip ~/bin/perf
# perf test dwarf
58: DWARF unwind : FAILED!
# perf test -v dwarf
58: DWARF unwind :
--- start ---
test child forked, pid 6590
unwind: thread map already set, dso=/home/acme/bin/perf
<SNIP>
unwind: access_mem addr 0x7ffce6c48098 val 48563f, offset 1144
unwind: test__dwarf_unwind:ip = 0x4a54e5 (0xa54e5)
got: test__dwarf_unwind 0xa54e5, expecting test__dwarf_unwind
unwind: '':ip = 0x4a50bb (0xa50bb)
failed: got unresolved address 0xa50bb
unwind failed
test child finished with -1
---- end ----
DWARF unwind: FAILED!
#
After:
# perf test dwarf
58: DWARF unwind : Ok
# strip ~/bin/perf
# perf test dwarf
58: DWARF unwind : Ok
#
# perf test -v dwarf
58: DWARF unwind :
--- start ---
test child forked, pid 7219
unwind: thread map already set, dso=/home/acme/bin/perf
<SNIP>
unwind: access_mem addr 0x7fff007da2c8 val 48575f, offset 1144
unwind: test__arch_unwind_sample:ip = 0x589044 (0x189044)
got: test__arch_unwind_sample 0x189044, expecting test__arch_unwind_sample
unwind: test_dwarf_unwind__thread:ip = 0x4a52f7 (0xa52f7)
got: test_dwarf_unwind__thread 0xa52f7, expecting test_dwarf_unwind__thread
unwind: test_dwarf_unwind__compare:ip = 0x4a5468 (0xa5468)
got: test_dwarf_unwind__compare 0xa5468, expecting test_dwarf_unwind__compare
unwind: bsearch:ip = 0x7f6608ae94d8 (0x394d8)
got: bsearch 0x394d8, expecting bsearch
unwind: test_dwarf_unwind__krava_3:ip = 0x4a54d1 (0xa54d1)
got: test_dwarf_unwind__krava_3 0xa54d1, expecting test_dwarf_unwind__krava_3
unwind: test_dwarf_unwind__krava_2:ip = 0x4a550b (0xa550b)
got: test_dwarf_unwind__krava_2 0xa550b, expecting test_dwarf_unwind__krava_2
unwind: test_dwarf_unwind__krava_1:ip = 0x4a554b (0xa554b)
got: test_dwarf_unwind__krava_1 0xa554b, expecting test_dwarf_unwind__krava_1
unwind: test__dwarf_unwind:ip = 0x4a5605 (0xa5605)
got: test__dwarf_unwind 0xa5605, expecting test__dwarf_unwind
test child finished with 0
---- end ----
DWARF unwind: Ok
#
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/tests/dwarf-unwind.c | 46 ++++++++++++++++++++++++++--------------
1 file changed, 30 insertions(+), 16 deletions(-)
--- a/tools/perf/tests/dwarf-unwind.c
+++ b/tools/perf/tests/dwarf-unwind.c
@@ -37,6 +37,19 @@ static int init_live_machine(struct mach
mmap_handler, machine, true, 500);
}
+/*
+ * We need to keep these functions global, despite the
+ * fact that they are used only locally in this object,
+ * in order to keep them around even if the binary is
+ * stripped. If they are gone, the unwind check for
+ * symbol fails.
+ */
+int test_dwarf_unwind__thread(struct thread *thread);
+int test_dwarf_unwind__compare(void *p1, void *p2);
+int test_dwarf_unwind__krava_3(struct thread *thread);
+int test_dwarf_unwind__krava_2(struct thread *thread);
+int test_dwarf_unwind__krava_1(struct thread *thread);
+
#define MAX_STACK 8
static int unwind_entry(struct unwind_entry *entry, void *arg)
@@ -45,12 +58,12 @@ static int unwind_entry(struct unwind_en
char *symbol = entry->sym ? entry->sym->name : NULL;
static const char *funcs[MAX_STACK] = {
"test__arch_unwind_sample",
- "unwind_thread",
- "compare",
+ "test_dwarf_unwind__thread",
+ "test_dwarf_unwind__compare",
"bsearch",
- "krava_3",
- "krava_2",
- "krava_1",
+ "test_dwarf_unwind__krava_3",
+ "test_dwarf_unwind__krava_2",
+ "test_dwarf_unwind__krava_1",
"test__dwarf_unwind"
};
/*
@@ -77,7 +90,7 @@ static int unwind_entry(struct unwind_en
return strcmp((const char *) symbol, funcs[idx]);
}
-static noinline int unwind_thread(struct thread *thread)
+noinline int test_dwarf_unwind__thread(struct thread *thread)
{
struct perf_sample sample;
unsigned long cnt = 0;
@@ -108,7 +121,7 @@ static noinline int unwind_thread(struct
static int global_unwind_retval = -INT_MAX;
-static noinline int compare(void *p1, void *p2)
+noinline int test_dwarf_unwind__compare(void *p1, void *p2)
{
/* Any possible value should be 'thread' */
struct thread *thread = *(struct thread **)p1;
@@ -117,17 +130,17 @@ static noinline int compare(void *p1, vo
/* Call unwinder twice for both callchain orders. */
callchain_param.order = ORDER_CALLER;
- global_unwind_retval = unwind_thread(thread);
+ global_unwind_retval = test_dwarf_unwind__thread(thread);
if (!global_unwind_retval) {
callchain_param.order = ORDER_CALLEE;
- global_unwind_retval = unwind_thread(thread);
+ global_unwind_retval = test_dwarf_unwind__thread(thread);
}
}
return p1 - p2;
}
-static noinline int krava_3(struct thread *thread)
+noinline int test_dwarf_unwind__krava_3(struct thread *thread)
{
struct thread *array[2] = {thread, thread};
void *fp = &bsearch;
@@ -141,18 +154,19 @@ static noinline int krava_3(struct threa
size_t, int (*)(void *, void *));
_bsearch = fp;
- _bsearch(array, &thread, 2, sizeof(struct thread **), compare);
+ _bsearch(array, &thread, 2, sizeof(struct thread **),
+ test_dwarf_unwind__compare);
return global_unwind_retval;
}
-static noinline int krava_2(struct thread *thread)
+noinline int test_dwarf_unwind__krava_2(struct thread *thread)
{
- return krava_3(thread);
+ return test_dwarf_unwind__krava_3(thread);
}
-static noinline int krava_1(struct thread *thread)
+noinline int test_dwarf_unwind__krava_1(struct thread *thread)
{
- return krava_2(thread);
+ return test_dwarf_unwind__krava_2(thread);
}
int test__dwarf_unwind(struct test *test __maybe_unused, int subtest __maybe_unused)
@@ -189,7 +203,7 @@ int test__dwarf_unwind(struct test *test
goto out;
}
- err = krava_1(thread);
+ err = test_dwarf_unwind__krava_1(thread);
thread__put(thread);
out:
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit 153e1b84f477f716bc3f81e6cfae1a3d941fc7ec ]
Add test cases verifying FIB onlink commands work as expected in
various conditions - IPv4, IPv6, main table, and VRF.
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/net/fib-onlink-tests.sh | 375 ++++++++++++++++++++++++
1 file changed, 375 insertions(+)
create mode 100644 tools/testing/selftests/net/fib-onlink-tests.sh
--- /dev/null
+++ b/tools/testing/selftests/net/fib-onlink-tests.sh
@@ -0,0 +1,375 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# IPv4 and IPv6 onlink tests
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+
+# Network interfaces
+# - odd in current namespace; even in peer ns
+declare -A NETIFS
+# default VRF
+NETIFS[p1]=veth1
+NETIFS[p2]=veth2
+NETIFS[p3]=veth3
+NETIFS[p4]=veth4
+# VRF
+NETIFS[p5]=veth5
+NETIFS[p6]=veth6
+NETIFS[p7]=veth7
+NETIFS[p8]=veth8
+
+# /24 network
+declare -A V4ADDRS
+V4ADDRS[p1]=169.254.1.1
+V4ADDRS[p2]=169.254.1.2
+V4ADDRS[p3]=169.254.3.1
+V4ADDRS[p4]=169.254.3.2
+V4ADDRS[p5]=169.254.5.1
+V4ADDRS[p6]=169.254.5.2
+V4ADDRS[p7]=169.254.7.1
+V4ADDRS[p8]=169.254.7.2
+
+# /64 network
+declare -A V6ADDRS
+V6ADDRS[p1]=2001:db8:101::1
+V6ADDRS[p2]=2001:db8:101::2
+V6ADDRS[p3]=2001:db8:301::1
+V6ADDRS[p4]=2001:db8:301::2
+V6ADDRS[p5]=2001:db8:501::1
+V6ADDRS[p6]=2001:db8:501::2
+V6ADDRS[p7]=2001:db8:701::1
+V6ADDRS[p8]=2001:db8:701::2
+
+# Test networks:
+# [1] = default table
+# [2] = VRF
+#
+# /32 host routes
+declare -A TEST_NET4
+TEST_NET4[1]=169.254.101
+TEST_NET4[2]=169.254.102
+# /128 host routes
+declare -A TEST_NET6
+TEST_NET6[1]=2001:db8:101
+TEST_NET6[2]=2001:db8:102
+
+# connected gateway
+CONGW[1]=169.254.1.254
+CONGW[2]=169.254.5.254
+
+# recursive gateway
+RECGW4[1]=169.254.11.254
+RECGW4[2]=169.254.12.254
+RECGW6[1]=2001:db8:11::64
+RECGW6[2]=2001:db8:12::64
+
+# for v4 mapped to v6
+declare -A TEST_NET4IN6IN6
+TEST_NET4IN6[1]=10.1.1.254
+TEST_NET4IN6[2]=10.2.1.254
+
+# mcast address
+MCAST6=ff02::1
+
+
+PEER_NS=bart
+PEER_CMD="ip netns exec ${PEER_NS}"
+VRF=lisa
+VRF_TABLE=1101
+PBR_TABLE=101
+
+################################################################################
+# utilities
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ nsuccess=$((nsuccess+1))
+ printf "\n TEST: %-50s [ OK ]\n" "${msg}"
+ else
+ nfail=$((nfail+1))
+ printf "\n TEST: %-50s [FAIL]\n" "${msg}"
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+}
+
+log_section()
+{
+ echo
+ echo "######################################################################"
+ echo "TEST SECTION: $*"
+ echo "######################################################################"
+}
+
+log_subsection()
+{
+ echo
+ echo "#########################################"
+ echo "TEST SUBSECTION: $*"
+}
+
+run_cmd()
+{
+ echo
+ echo "COMMAND: $*"
+ eval $*
+}
+
+get_linklocal()
+{
+ local dev=$1
+ local pfx
+ local addr
+
+ addr=$(${pfx} ip -6 -br addr show dev ${dev} | \
+ awk '{
+ for (i = 3; i <= NF; ++i) {
+ if ($i ~ /^fe80/)
+ print $i
+ }
+ }'
+ )
+ addr=${addr/\/*}
+
+ [ -z "$addr" ] && return 1
+
+ echo $addr
+
+ return 0
+}
+
+################################################################################
+#
+
+setup()
+{
+ echo
+ echo "########################################"
+ echo "Configuring interfaces"
+
+ set -e
+
+ # create namespace
+ ip netns add ${PEER_NS}
+ ip -netns ${PEER_NS} li set lo up
+
+ # add vrf table
+ ip li add ${VRF} type vrf table ${VRF_TABLE}
+ ip li set ${VRF} up
+ ip ro add table ${VRF_TABLE} unreachable default
+ ip -6 ro add table ${VRF_TABLE} unreachable default
+
+ # create test interfaces
+ ip li add ${NETIFS[p1]} type veth peer name ${NETIFS[p2]}
+ ip li add ${NETIFS[p3]} type veth peer name ${NETIFS[p4]}
+ ip li add ${NETIFS[p5]} type veth peer name ${NETIFS[p6]}
+ ip li add ${NETIFS[p7]} type veth peer name ${NETIFS[p8]}
+
+ # enslave vrf interfaces
+ for n in 5 7; do
+ ip li set ${NETIFS[p${n}]} vrf ${VRF}
+ done
+
+ # add addresses
+ for n in 1 3 5 7; do
+ ip li set ${NETIFS[p${n}]} up
+ ip addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]}
+ ip addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]}
+ done
+
+ # move peer interfaces to namespace and add addresses
+ for n in 2 4 6 8; do
+ ip li set ${NETIFS[p${n}]} netns ${PEER_NS} up
+ ip -netns ${PEER_NS} addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]}
+ ip -netns ${PEER_NS} addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]}
+ done
+
+ set +e
+
+ # let DAD complete - assume default of 1 probe
+ sleep 1
+}
+
+cleanup()
+{
+ # make sure we start from a clean slate
+ ip netns del ${PEER_NS} 2>/dev/null
+ for n in 1 3 5 7; do
+ ip link del ${NETIFS[p${n}]} 2>/dev/null
+ done
+ ip link del ${VRF} 2>/dev/null
+ ip ro flush table ${VRF_TABLE}
+ ip -6 ro flush table ${VRF_TABLE}
+}
+
+################################################################################
+# IPv4 tests
+#
+
+run_ip()
+{
+ local table="$1"
+ local prefix="$2"
+ local gw="$3"
+ local dev="$4"
+ local exp_rc="$5"
+ local desc="$6"
+
+ # dev arg may be empty
+ [ -n "${dev}" ] && dev="dev ${dev}"
+
+ run_cmd ip ro add table "${table}" "${prefix}"/32 via "${gw}" "${dev}" onlink
+ log_test $? ${exp_rc} "${desc}"
+}
+
+valid_onlink_ipv4()
+{
+ # - unicast connected, unicast recursive
+ #
+ log_subsection "default VRF - main table"
+
+ run_ip 254 ${TEST_NET4[1]}.1 ${CONGW[1]} ${NETIFS[p1]} 0 "unicast connected"
+ run_ip 254 ${TEST_NET4[1]}.2 ${RECGW4[1]} ${NETIFS[p1]} 0 "unicast recursive"
+
+ log_subsection "VRF ${VRF}"
+
+ run_ip ${VRF_TABLE} ${TEST_NET4[2]}.1 ${CONGW[2]} ${NETIFS[p5]} 0 "unicast connected"
+ run_ip ${VRF_TABLE} ${TEST_NET4[2]}.2 ${RECGW4[2]} ${NETIFS[p5]} 0 "unicast recursive"
+
+ log_subsection "VRF device, PBR table"
+
+ run_ip ${PBR_TABLE} ${TEST_NET4[2]}.3 ${CONGW[2]} ${NETIFS[p5]} 0 "unicast connected"
+ run_ip ${PBR_TABLE} ${TEST_NET4[2]}.4 ${RECGW4[2]} ${NETIFS[p5]} 0 "unicast recursive"
+}
+
+invalid_onlink_ipv4()
+{
+ run_ip 254 ${TEST_NET4[1]}.11 ${V4ADDRS[p1]} ${NETIFS[p1]} 2 \
+ "Invalid gw - local unicast address"
+
+ run_ip ${VRF_TABLE} ${TEST_NET4[2]}.11 ${V4ADDRS[p5]} ${NETIFS[p5]} 2 \
+ "Invalid gw - local unicast address, VRF"
+
+ run_ip 254 ${TEST_NET4[1]}.101 ${V4ADDRS[p1]} "" 2 "No nexthop device given"
+
+ run_ip 254 ${TEST_NET4[1]}.102 ${V4ADDRS[p3]} ${NETIFS[p1]} 2 \
+ "Gateway resolves to wrong nexthop device"
+
+ run_ip ${VRF_TABLE} ${TEST_NET4[2]}.103 ${V4ADDRS[p7]} ${NETIFS[p5]} 2 \
+ "Gateway resolves to wrong nexthop device - VRF"
+}
+
+################################################################################
+# IPv6 tests
+#
+
+run_ip6()
+{
+ local table="$1"
+ local prefix="$2"
+ local gw="$3"
+ local dev="$4"
+ local exp_rc="$5"
+ local desc="$6"
+
+ # dev arg may be empty
+ [ -n "${dev}" ] && dev="dev ${dev}"
+
+ run_cmd ip -6 ro add table "${table}" "${prefix}"/128 via "${gw}" "${dev}" onlink
+ log_test $? ${exp_rc} "${desc}"
+}
+
+valid_onlink_ipv6()
+{
+ # - unicast connected, unicast recursive, v4-mapped
+ #
+ log_subsection "default VRF - main table"
+
+ run_ip6 254 ${TEST_NET6[1]}::1 ${V6ADDRS[p1]/::*}::64 ${NETIFS[p1]} 0 "unicast connected"
+ run_ip6 254 ${TEST_NET6[1]}::2 ${RECGW6[1]} ${NETIFS[p1]} 0 "unicast recursive"
+ run_ip6 254 ${TEST_NET6[1]}::3 ::ffff:${TEST_NET4IN6[1]} ${NETIFS[p1]} 0 "v4-mapped"
+
+ log_subsection "VRF ${VRF}"
+
+ run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::1 ${V6ADDRS[p5]/::*}::64 ${NETIFS[p5]} 0 "unicast connected"
+ run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::2 ${RECGW6[2]} ${NETIFS[p5]} 0 "unicast recursive"
+ run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::3 ::ffff:${TEST_NET4IN6[2]} ${NETIFS[p5]} 0 "v4-mapped"
+
+ log_subsection "VRF device, PBR table"
+
+ run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::4 ${V6ADDRS[p5]/::*}::64 ${NETIFS[p5]} 0 "unicast connected"
+ run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::5 ${RECGW6[2]} ${NETIFS[p5]} 0 "unicast recursive"
+ run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::6 ::ffff:${TEST_NET4IN6[2]} ${NETIFS[p5]} 0 "v4-mapped"
+}
+
+invalid_onlink_ipv6()
+{
+ local lladdr
+
+ lladdr=$(get_linklocal ${NETIFS[p1]}) || return 1
+
+ run_ip6 254 ${TEST_NET6[1]}::11 ${V6ADDRS[p1]} ${NETIFS[p1]} 2 \
+ "Invalid gw - local unicast address"
+ run_ip6 254 ${TEST_NET6[1]}::12 ${lladdr} ${NETIFS[p1]} 2 \
+ "Invalid gw - local linklocal address"
+ run_ip6 254 ${TEST_NET6[1]}::12 ${MCAST6} ${NETIFS[p1]} 2 \
+ "Invalid gw - multicast address"
+
+ lladdr=$(get_linklocal ${NETIFS[p5]}) || return 1
+ run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::11 ${V6ADDRS[p5]} ${NETIFS[p5]} 2 \
+ "Invalid gw - local unicast address, VRF"
+ run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::12 ${lladdr} ${NETIFS[p5]} 2 \
+ "Invalid gw - local linklocal address, VRF"
+ run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::12 ${MCAST6} ${NETIFS[p5]} 2 \
+ "Invalid gw - multicast address, VRF"
+
+ run_ip6 254 ${TEST_NET6[1]}::101 ${V6ADDRS[p1]} "" 2 \
+ "No nexthop device given"
+
+ # default VRF validation is done against LOCAL table
+ # run_ip6 254 ${TEST_NET6[1]}::102 ${V6ADDRS[p3]/::[0-9]/::64} ${NETIFS[p1]} 2 \
+ # "Gateway resolves to wrong nexthop device"
+
+ run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::103 ${V6ADDRS[p7]/::[0-9]/::64} ${NETIFS[p5]} 2 \
+ "Gateway resolves to wrong nexthop device - VRF"
+}
+
+run_onlink_tests()
+{
+ log_section "IPv4 onlink"
+ log_subsection "Valid onlink commands"
+ valid_onlink_ipv4
+ log_subsection "Invalid onlink commands"
+ invalid_onlink_ipv4
+
+ log_section "IPv6 onlink"
+ log_subsection "Valid onlink commands"
+ valid_onlink_ipv6
+ invalid_onlink_ipv6
+}
+
+################################################################################
+# main
+
+nsuccess=0
+nfail=0
+
+cleanup
+setup
+run_onlink_tests
+cleanup
+
+if [ "$TESTS" != "none" ]; then
+ printf "\nTests passed: %3d\n" ${nsuccess}
+ printf "Tests failed: %3d\n" ${nfail}
+fi
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Richter <[email protected]>
[ Upstream commit 0f19a038afdc592176c9a302f0d08be6a68ad74a ]
Using Fedora 27 and latest Linux kernel the test case
trace+probe_libc_inet_pton.sh fails again on s390. This time is the
inlining of functions which does not match. After an update of the
glibc (from 2.26-16 to 2.26-24) the output is different
The expected output is:
__inet_pton (/usr/lib64/libc-2.26.so)
gaih_inet (inlined)
....
The actual output is:
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.061/0.061/0.061/0.000 ms
0.000 probe_libc:inet_pton:(3ffb2140448))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
...
Fix this by being less strict on 'inlined' verses library name and
accept both
Signed-off-by: Thomas Richter <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/tests/shell/trace+probe_libc_inet_pton.sh | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/tools/perf/tests/shell/trace+probe_libc_inet_pton.sh
+++ b/tools/perf/tests/shell/trace+probe_libc_inet_pton.sh
@@ -21,12 +21,12 @@ trace_libc_inet_pton_backtrace() {
expected[3]=".*packets transmitted.*"
expected[4]="rtt min.*"
expected[5]="[0-9]+\.[0-9]+[[:space:]]+probe_libc:inet_pton:\([[:xdigit:]]+\)"
- expected[6]=".*inet_pton[[:space:]]\($libc\)$"
+ expected[6]=".*inet_pton[[:space:]]\($libc|inlined\)$"
case "$(uname -m)" in
s390x)
eventattr='call-graph=dwarf'
- expected[7]="gaih_inet[[:space:]]\(inlined\)$"
- expected[8]="__GI_getaddrinfo[[:space:]]\(inlined\)$"
+ expected[7]="gaih_inet.*[[:space:]]\($libc|inlined\)$"
+ expected[8]="__GI_getaddrinfo[[:space:]]\($libc|inlined\)$"
expected[9]="main[[:space:]]\(.*/bin/ping.*\)$"
expected[10]="__libc_start_main[[:space:]]\($libc\)$"
expected[11]="_start[[:space:]]\(.*/bin/ping.*\)$"
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit baf10564fbb66ea222cae66fbff11c444590ffd9 upstream.
kill_ioctx() used to have an explicit RCU delay between removing the
reference from ->ioctx_table and percpu_ref_kill() dropping the refcount.
At some point that delay had been removed, on the theory that
percpu_ref_kill() itself contained an RCU delay. Unfortunately, that was
the wrong kind of RCU delay and it didn't care about rcu_read_lock() used
by lookup_ioctx(). As the result, we could get ctx freed right under
lookup_ioctx(). Tejun has fixed that in a6d7cff472e ("fs/aio: Add explicit
RCU grace period when freeing kioctx"); however, that fix is not enough.
Suppose io_destroy() from one thread races with e.g. io_setup() from another;
CPU1 removes the reference from current->mm->ioctx_table[...] just as CPU2
has picked it (under rcu_read_lock()). Then CPU1 proceeds to drop the
refcount, getting it to 0 and triggering a call of free_ioctx_users(),
which proceeds to drop the secondary refcount and once that reaches zero
calls free_ioctx_reqs(). That does
INIT_RCU_WORK(&ctx->free_rwork, free_ioctx);
queue_rcu_work(system_wq, &ctx->free_rwork);
and schedules freeing the whole thing after RCU delay.
In the meanwhile CPU2 has gotten around to percpu_ref_get(), bumping the
refcount from 0 to 1 and returned the reference to io_setup().
Tejun's fix (that queue_rcu_work() in there) guarantees that ctx won't get
freed until after percpu_ref_get(). Sure, we'd increment the counter before
ctx can be freed. Now we are out of rcu_read_lock() and there's nothing to
stop freeing of the whole thing. Unfortunately, CPU2 assumes that since it
has grabbed the reference, ctx is *NOT* going away until it gets around to
dropping that reference.
The fix is obvious - use percpu_ref_tryget_live() and treat failure as miss.
It's not costlier than what we currently do in normal case, it's safe to
call since freeing *is* delayed and it closes the race window - either
lookup_ioctx() comes before percpu_ref_kill() (in which case ctx->users
won't reach 0 until the caller of lookup_ioctx() drops it) or lookup_ioctx()
fails, ctx->users is unaffected and caller of lookup_ioctx() doesn't see
the object in question at all.
Cc: [email protected]
Fixes: a6d7cff472e "fs/aio: Add explicit RCU grace period when freeing kioctx"
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/aio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1087,8 +1087,8 @@ static struct kioctx *lookup_ioctx(unsig
ctx = rcu_dereference(table->table[id]);
if (ctx && ctx->user_id == ctx_id) {
- percpu_ref_get(&ctx->users);
- ret = ctx;
+ if (percpu_ref_tryget_live(&ctx->users))
+ ret = ctx;
}
out:
rcu_read_unlock();
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jake Moroni <[email protected]>
[ Upstream commit 3021efb440d02bf5b952b6d151c7ffee9bdd49fe ]
The ADVERTISED_Asym_Pause bit was being improperly set when both
rx and tx pause were enabled. When rx and tx are both enabled, only
the ADVERTISED_Pause bit is supposed to be set.
Signed-off-by: Jake Moroni <[email protected]>
Acked-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -211,7 +211,7 @@ static int dpaa_set_pauseparam(struct ne
if (epause->rx_pause)
newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
if (epause->tx_pause)
- newadv |= ADVERTISED_Asym_Pause;
+ newadv ^= ADVERTISED_Asym_Pause;
oldadv = phydev->advertising &
(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baoquan He <[email protected]>
[ Upstream commit bee3204ec3c49f6f53add9c3962c9012a5c036fa ]
Currently the kdump kernel becomes very slow if 'noapic' is specified.
Normal kernel doesn't have this bug.
Kernel parameter 'noapic' is used to disable IO-APIC in system for
testing or special purpose. Here the root cause is that in kdump
kernel LAPIC is disabled since commit:
522e664644 ("x86/apic: Disable I/O APIC before shutdown of the local APIC")
In this case we need set up through-local-APIC on boot CPU in
setup_local_APIC().
In normal kernel the legacy irq mode is enabled by the BIOS. If
it is virtual wire mode, the local-APIC has been enabled and set as
through-local-APIC.
Though we fixed the regression introduced by commit 522e664644,
to further improve robustness set up the through-local-APIC mode
explicitly, do not rely on the default boot IRQ mode.
Signed-off-by: Baoquan He <[email protected]>
Reviewed-by: Eric W. Biederman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
[ Rewrote the changelog. ]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/apic/apic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1570,7 +1570,7 @@ void setup_local_APIC(void)
* TODO: set up through-local-APIC from through-I/O-APIC? --macro
*/
value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
- if (!cpu && (pic_mode || !value)) {
+ if (!cpu && (pic_mode || !value || skip_ioapic_setup)) {
value = APIC_DM_EXTINT;
apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", cpu);
} else {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joe Perches <[email protected]>
[ Upstream commit db6775ca6e0353d2618ca7d5e210fc36ad43bbd4 ]
Using a period after a newline causes bad output.
Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes")
Signed-off-by: Joe Perches <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/17886/
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/cavium-octeon/octeon-irq.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -2271,7 +2271,7 @@ static int __init octeon_irq_init_cib(st
parent_irq = irq_of_parse_and_map(ciu_node, 0);
if (!parent_irq) {
- pr_err("ERROR: Couldn't acquire parent_irq for %s\n.",
+ pr_err("ERROR: Couldn't acquire parent_irq for %s\n",
ciu_node->name);
return -EINVAL;
}
@@ -2283,7 +2283,7 @@ static int __init octeon_irq_init_cib(st
addr = of_get_address(ciu_node, 0, NULL, NULL);
if (!addr) {
- pr_err("ERROR: Couldn't acquire reg(0) %s\n.", ciu_node->name);
+ pr_err("ERROR: Couldn't acquire reg(0) %s\n", ciu_node->name);
return -EINVAL;
}
host_data->raw_reg = (u64)phys_to_virt(
@@ -2291,7 +2291,7 @@ static int __init octeon_irq_init_cib(st
addr = of_get_address(ciu_node, 1, NULL, NULL);
if (!addr) {
- pr_err("ERROR: Couldn't acquire reg(1) %s\n.", ciu_node->name);
+ pr_err("ERROR: Couldn't acquire reg(1) %s\n", ciu_node->name);
return -EINVAL;
}
host_data->en_reg = (u64)phys_to_virt(
@@ -2299,7 +2299,7 @@ static int __init octeon_irq_init_cib(st
r = of_property_read_u32(ciu_node, "cavium,max-bits", &val);
if (r) {
- pr_err("ERROR: Couldn't read cavium,max-bits from %s\n.",
+ pr_err("ERROR: Couldn't read cavium,max-bits from %s\n",
ciu_node->name);
return r;
}
@@ -2309,7 +2309,7 @@ static int __init octeon_irq_init_cib(st
&octeon_irq_domain_cib_ops,
host_data);
if (!cib_domain) {
- pr_err("ERROR: Couldn't irq_domain_add_linear()\n.");
+ pr_err("ERROR: Couldn't irq_domain_add_linear()\n");
return -ENOMEM;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit b127125d9db23e4856156a7c909a3c8e18b69f99 upstream.
"VFS: don't keep disconnected dentries on d_anon" had a non-trivial
side-effect - d_unhashed() now returns true for those dentries,
making d_find_alias() skip them altogether. For most of its callers
that's fine - we really want a connected alias there. However,
there is a codepath where we relied upon picking such aliases
if nothing else could be found - selinux delayed initialization
of contexts for inodes on already mounted filesystems used to
rely upon that.
Cc: [email protected] # f1ee616214cb "VFS: don't keep disconnected dentries on d_anon"
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/hooks.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1532,8 +1532,15 @@ static int inode_doinit_with_dentry(stru
/* Called from d_instantiate or d_splice_alias. */
dentry = dget(opt_dentry);
} else {
- /* Called from selinux_complete_init, try to find a dentry. */
+ /*
+ * Called from selinux_complete_init, try to find a dentry.
+ * Some filesystems really want a connected one, so try
+ * that first. We could split SECURITY_FS_USE_XATTR in
+ * two, depending upon that...
+ */
dentry = d_find_alias(inode);
+ if (!dentry)
+ dentry = d_find_any_alias(inode);
}
if (!dentry) {
/*
@@ -1636,14 +1643,19 @@ static int inode_doinit_with_dentry(stru
if ((sbsec->flags & SE_SBGENFS) && !S_ISLNK(inode->i_mode)) {
/* We must have a dentry to determine the label on
* procfs inodes */
- if (opt_dentry)
+ if (opt_dentry) {
/* Called from d_instantiate or
* d_splice_alias. */
dentry = dget(opt_dentry);
- else
+ } else {
/* Called from selinux_complete_init, try to
- * find a dentry. */
+ * find a dentry. Some filesystems really want
+ * a connected one, so try that first.
+ */
dentry = d_find_alias(inode);
+ if (!dentry)
+ dentry = d_find_any_alias(inode);
+ }
/*
* This can be hit on boot when a file is accessed
* before the policy is loaded. When we load policy we
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 326691ad4f179e6edc7eb1271e618dd673e4736d upstream.
bitmap_or() and bitmap_andnot() can work properly with dst identical
to src1 or src2. There is no need of an intermediate result bitmap
that is copied back to dst in a second step.
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/slice.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -388,21 +388,17 @@ static unsigned long slice_find_area(str
static inline void slice_or_mask(struct slice_mask *dst, struct slice_mask *src)
{
- DECLARE_BITMAP(result, SLICE_NUM_HIGH);
-
dst->low_slices |= src->low_slices;
- bitmap_or(result, dst->high_slices, src->high_slices, SLICE_NUM_HIGH);
- bitmap_copy(dst->high_slices, result, SLICE_NUM_HIGH);
+ bitmap_or(dst->high_slices, dst->high_slices, src->high_slices,
+ SLICE_NUM_HIGH);
}
static inline void slice_andnot_mask(struct slice_mask *dst, struct slice_mask *src)
{
- DECLARE_BITMAP(result, SLICE_NUM_HIGH);
-
dst->low_slices &= ~src->low_slices;
- bitmap_andnot(result, dst->high_slices, src->high_slices, SLICE_NUM_HIGH);
- bitmap_copy(dst->high_slices, result, SLICE_NUM_HIGH);
+ bitmap_andnot(dst->high_slices, dst->high_slices, src->high_slices,
+ SLICE_NUM_HIGH);
}
#ifdef CONFIG_PPC_64K_PAGES
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tao <[email protected]>
[ Upstream commit 3b94a4007dcfd4ac5780cd3d8a2d99979c966073 ]
Brightness couldn't change when booting up in DC mode.
It was because "psr_enabled" flag was not set to true before
setting vsc packet revision, causing packet rev setup was skipped.
Now instead of checking the psr flag, it checks if the DPCD_REV >= 1.2
and set the vsc packet revision.
Signed-off-by: Tao <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -35,6 +35,7 @@
#include "core_types.h"
#include "set_mode_types.h"
#include "virtual/virtual_stream_encoder.h"
+#include "dpcd_defs.h"
#include "dce80/dce80_resource.h"
#include "dce100/dce100_resource.h"
@@ -2428,7 +2429,8 @@ static void set_vsc_info_packet(
unsigned int vscPacketRevision = 0;
unsigned int i;
- if (stream->sink->link->psr_enabled) {
+ /*VSC packet set to 2 when DP revision >= 1.2*/
+ if (stream->sink->link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_12) {
vscPacketRevision = 2;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacob Keller <[email protected]>
[ Upstream commit 6704a3abf4cf4181a1ee64f5db4969347b88ca1d ]
On hardware which supports timestamping all packets, the timestamps are
recorded in the packet buffer, and the driver no longer uses or reads
the registers. This makes the logic for checking and clearing Rx
timestamp hangs meaningless.
If we run the ixgbe_ptp_rx_hang() function in this case, then the driver
will continuously spam the log output with "Clearing Rx timestamp hang".
These messages are spurious, and confusing to end users.
The original code in commit a9763f3cb54c ("ixgbe: Update PTP to support
X550EM_x devices", 2015-12-03) did have a flag PTP_RX_TIMESTAMP_IN_REGISTER
which was intended to be used to avoid the Rx timestamp hang check,
however it did not actually check the flag before calling the function.
Do so now in order to stop the checks and prevent the spurious log
messages.
Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices", 2015-12-03)
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7711,7 +7711,8 @@ static void ixgbe_service_task(struct wo
if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) {
ixgbe_ptp_overflow_check(adapter);
- ixgbe_ptp_rx_hang(adapter);
+ if (adapter->flags & IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER)
+ ixgbe_ptp_rx_hang(adapter);
ixgbe_ptp_tx_hang(adapter);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Fitzgerald <[email protected]>
[ Upstream commit b89405b6102fcc3746f43697b826028caa94c823 ]
When dt_to_map_one_config() is called with a pinctrl_dev passed
in, it should only be using this if the node being looked up
is a hog. The code was always using the passed pinctrl_dev
without checking whether the dt node referred to it.
A pin controller can have pinctrl-n dependencies on other pin
controllers in these cases:
- the pin controller hardware is external, for example I2C, so
needs other pin controller(s) to be setup to communicate with
the hardware device.
- it is a child of a composite MFD so its of_node is shared with
the parent MFD and other children of that MFD. Any part of that
MFD could have dependencies on other pin controllers.
Because of this, dt_to_map_one_config() can't assume that if it
has a pinctrl_dev passed in then the node it looks up must be
a hog. It could be a reference to some other pin controller.
Signed-off-by: Richard Fitzgerald <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/devicetree.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -122,8 +122,10 @@ static int dt_to_map_one_config(struct p
/* OK let's just assume this will appear later then */
return -EPROBE_DEFER;
}
- if (!pctldev)
- pctldev = get_pinctrl_dev_from_of_node(np_pctldev);
+ /* If we're creating a hog we can use the passed pctldev */
+ if (pctldev && (np_pctldev == p->dev->of_node))
+ break;
+ pctldev = get_pinctrl_dev_from_of_node(np_pctldev);
if (pctldev)
break;
/* Do not defer probing of hogs (circular loop) */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Cassel <[email protected]>
[ Upstream commit 7e065fb9ccce89fe667fdbd9a177eaec59a359fc ]
Add missing pin group uart5nocts (all pins except cts), which has been
supported by the artpec6 pinctrl driver since its initial submission.
Fixes: 00df0582eab1 ("pinctrl: Add pincontrol driver for ARTPEC-6 SoC")
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
@@ -20,7 +20,8 @@ Required subnode-properties:
gpio: cpuclkoutgrp0, udlclkoutgrp0, i2c1grp0, i2c2grp0,
i2c3grp0, i2s0grp0, i2s1grp0, i2srefclkgrp0, spi0grp0,
spi1grp0, pciedebuggrp0, uart0grp0, uart0grp1, uart1grp0,
- uart2grp0, uart2grp1, uart3grp0, uart4grp0, uart5grp0
+ uart2grp0, uart2grp1, uart3grp0, uart4grp0, uart5grp0,
+ uart5nocts
cpuclkout: cpuclkoutgrp0
udlclkout: udlclkoutgrp0
i2c1: i2c1grp0
@@ -37,7 +38,7 @@ Required subnode-properties:
uart2: uart2grp0, uart2grp1
uart3: uart3grp0
uart4: uart4grp0
- uart5: uart5grp0
+ uart5: uart5grp0, uart5nocts
nand: nandgrp0
sdio0: sdio0grp0
sdio1: sdio1grp0
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Archit Taneja <[email protected]>
[ Upstream commit 8c4905fd4939c59e0f7993ba34883e328eef4b59 ]
The PHY regulator supply names vary across different PHY versions.
Mention explicitly which PHYs require which supplies.
Cc: Rob Herring <[email protected]>
Cc: [email protected]
Signed-off-by: Archit Taneja <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/display/msm/dsi.txt | 4 ++++
1 file changed, 4 insertions(+)
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -102,7 +102,11 @@ Required properties:
- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
* "iface"
+ For 28nm HPM/LP, 28nm 8960 PHYs:
- vddio-supply: phandle to vdd-io regulator device node
+ For 20nm PHY:
+- vddio-supply: phandle to vdd-io regulator device node
+- vcca-supply: phandle to vcca regulator device node
Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: "[email protected]" <[email protected]>
[ Upstream commit 326ed382256475aa4b8b7eae8a2f60689fd25e78 ]
Avoid issue when probing the RNG without
reset if bad status has been detected previously
Signed-off-by: Lionel Debieve <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/hw_random/stm32-rng.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/char/hw_random/stm32-rng.c
+++ b/drivers/char/hw_random/stm32-rng.c
@@ -21,6 +21,7 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#include <linux/slab.h>
#define RNG_CR 0x00
@@ -46,6 +47,7 @@ struct stm32_rng_private {
struct hwrng rng;
void __iomem *base;
struct clk *clk;
+ struct reset_control *rst;
};
static int stm32_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
@@ -140,6 +142,13 @@ static int stm32_rng_probe(struct platfo
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
+ priv->rst = devm_reset_control_get(&ofdev->dev, NULL);
+ if (!IS_ERR(priv->rst)) {
+ reset_control_assert(priv->rst);
+ udelay(2);
+ reset_control_deassert(priv->rst);
+ }
+
dev_set_drvdata(dev, priv);
priv->rng.name = dev_driver_string(dev),
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Govindarajulu Varadarajan <[email protected]>
[ Upstream commit e8588e268509292550634d9a35f2723a207683b2 ]
rq should be enabled before posting the buffers to rq desc. If not hw sees
stale value and casuses DMAR errors.
Signed-off-by: Govindarajulu Varadarajan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -1898,6 +1898,8 @@ static int enic_open(struct net_device *
}
for (i = 0; i < enic->rq_count; i++) {
+ /* enable rq before updating rq desc */
+ vnic_rq_enable(&enic->rq[i]);
vnic_rq_fill(&enic->rq[i], enic_rq_alloc_buf);
/* Need at least one buffer on ring to get going */
if (vnic_rq_desc_used(&enic->rq[i]) == 0) {
@@ -1909,8 +1911,6 @@ static int enic_open(struct net_device *
for (i = 0; i < enic->wq_count; i++)
vnic_wq_enable(&enic->wq[i]);
- for (i = 0; i < enic->rq_count; i++)
- vnic_rq_enable(&enic->rq[i]);
if (!enic_is_dynamic(enic) && !enic_is_sriov_vf(enic))
enic_dev_add_station_addr(enic);
@@ -1936,8 +1936,12 @@ static int enic_open(struct net_device *
return 0;
err_out_free_rq:
- for (i = 0; i < enic->rq_count; i++)
+ for (i = 0; i < enic->rq_count; i++) {
+ err = vnic_rq_disable(&enic->rq[i]);
+ if (err)
+ return err;
vnic_rq_clean(&enic->rq[i], enic_free_rq_buf);
+ }
enic_dev_notify_unset(enic);
err_out_free_intr:
enic_unset_affinity_hint(enic);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <[email protected]>
[ Upstream commit 3caa973b7a260e7a2a69edc94c300ab9c65148c3 ]
When RCU stall warning triggers, it can print out a lot of messages
while holding spinlocks. If the console device is slow (e.g. an
actual or IPMI serial console), it may end up triggering NMI hard
lockup watchdog like the following.
---
kernel/rcu/tree_plugin.h | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -560,8 +560,14 @@ static void rcu_print_detail_task_stall_
}
t = list_entry(rnp->gp_tasks->prev,
struct task_struct, rcu_node_entry);
- list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry)
+ list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) {
+ /*
+ * We could be printing a lot while holding a spinlock.
+ * Avoid triggering hard lockup.
+ */
+ touch_nmi_watchdog();
sched_show_task(t);
+ }
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
}
@@ -1677,6 +1683,12 @@ static void print_cpu_stall_info(struct
char *ticks_title;
unsigned long ticks_value;
+ /*
+ * We could be printing a lot while holding a spinlock. Avoid
+ * triggering hard lockup.
+ */
+ touch_nmi_watchdog();
+
if (rsp->gpnum == rdp->gpnum) {
ticks_title = "ticks this GP";
ticks_value = rdp->ticks_this_gp;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Khoroshilov <[email protected]>
[ Upstream commit 3c829f47e33eb0398a9a14e357a05199a7be0277 ]
If devm_reset_control_get_exclusive() fails, asm9260_wdt_probe()
returns immediately. But clks has been already enabled at that point,
so it is required to disable them or to move the code around.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/asm9260_wdt.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/watchdog/asm9260_wdt.c
+++ b/drivers/watchdog/asm9260_wdt.c
@@ -292,14 +292,14 @@ static int asm9260_wdt_probe(struct plat
if (IS_ERR(priv->iobase))
return PTR_ERR(priv->iobase);
- ret = asm9260_wdt_get_dt_clks(priv);
- if (ret)
- return ret;
-
priv->rst = devm_reset_control_get_exclusive(&pdev->dev, "wdt_rst");
if (IS_ERR(priv->rst))
return PTR_ERR(priv->rst);
+ ret = asm9260_wdt_get_dt_clks(priv);
+ if (ret)
+ return ret;
+
wdd = &priv->wdd;
wdd->info = &asm9260_wdt_ident;
wdd->ops = &asm9260_wdt_ops;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Vincent-Cross <[email protected]>
[ Upstream commit 832e4e1f76b8a84991e9db56fdcef1ebce839b8b ]
Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Signed-off-by: Thomas Vincent-Cross <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3903,6 +3903,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_M
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220,
+ quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230,
quirk_dma_func1_alias);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yoshihiro Shimoda <[email protected]>
[ Upstream commit 3e081628d510b2ddbe493371d9c574d9275da17e ]
This patch fixes an issue that a race condition happens between a client
driver and the rcar-dmac driver:
- The rcar_dmac_isr_transfer_end() is called.
- The done list appears, and desc.running is the next active list.
- rcar_dmac_chan_get_residue() is called by a client driver before
rcar_dmac_isr_channel_thread() is called.
- The rcar_dmac_chan_get_residue() will not find any descriptors.
- And, the following WARNING happens:
WARN(1, "No descriptor for cookie!");
The sh-sci driver with HSCIF (921,600bps) on R-Car H3 can cause this
situation.
So, this patch checks the done lists in rcar_dmac_chan_get_residue()
and returns zero if the done lists has the argument cookie.
Tested-by: Nguyen Viet Dung <[email protected]>
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/sh/rcar-dmac.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1301,8 +1301,17 @@ static unsigned int rcar_dmac_chan_get_r
* If the cookie doesn't correspond to the currently running transfer
* then the descriptor hasn't been processed yet, and the residue is
* equal to the full descriptor size.
+ * Also, a client driver is possible to call this function before
+ * rcar_dmac_isr_channel_thread() runs. In this case, the "desc.running"
+ * will be the next descriptor, and the done list will appear. So, if
+ * the argument cookie matches the done list's cookie, we can assume
+ * the residue is zero.
*/
if (cookie != desc->async_tx.cookie) {
+ list_for_each_entry(desc, &chan->desc.done, node) {
+ if (cookie == desc->async_tx.cookie)
+ return 0;
+ }
list_for_each_entry(desc, &chan->desc.pending, node) {
if (cookie == desc->async_tx.cookie)
return desc->size;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
[ Upstream commit aa0ab02ba992eb956934b21373e0138211486ddd ]
On the 8xx, the page size is set in the PMD entry and applies to
all pages of the page table pointed by the said PMD entry.
When an app has some regular pages allocated (e.g. see below) and tries
to mmap() a huge page at a hint address covered by the same PMD entry,
the kernel accepts the hint allthough the 8xx cannot handle different
page sizes in the same PMD entry.
10000000-10001000 r-xp 00000000 00:0f 2597 /root/malloc
10010000-10011000 rwxp 00000000 00:0f 2597 /root/malloc
mmap(0x10080000, 524288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS|0x40000, -1, 0) = 0x10080000
This results the app remaining forever in do_page_fault()/hugetlb_fault()
and when interrupting that app, we get the following warning:
[162980.035629] WARNING: CPU: 0 PID: 2777 at arch/powerpc/mm/hugetlbpage.c:354 hugetlb_free_pgd_range+0xc8/0x1e4
[162980.035699] CPU: 0 PID: 2777 Comm: malloc Tainted: G W 4.14.6 #85
[162980.035744] task: c67e2c00 task.stack: c668e000
[162980.035783] NIP: c000fe18 LR: c00e1eec CTR: c00f90c0
[162980.035830] REGS: c668fc20 TRAP: 0700 Tainted: G W (4.14.6)
[162980.035854] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24044224 XER: 20000000
[162980.036003]
[162980.036003] GPR00: c00e1eec c668fcd0 c67e2c00 00000010 c6869410 10080000 00000000 77fb4000
[162980.036003] GPR08: ffff0001 0683c001 00000000 ffffff80 44028228 10018a34 00004008 418004fc
[162980.036003] GPR16: c668e000 00040100 c668e000 c06c0000 c668fe78 c668e000 c6835ba0 c668fd48
[162980.036003] GPR24: 00000000 73ffffff 74000000 00000001 77fb4000 100fffff 10100000 10100000
[162980.036743] NIP [c000fe18] hugetlb_free_pgd_range+0xc8/0x1e4
[162980.036839] LR [c00e1eec] free_pgtables+0x12c/0x150
[162980.036861] Call Trace:
[162980.036939] [c668fcd0] [c00f0774] unlink_anon_vmas+0x1c4/0x214 (unreliable)
[162980.037040] [c668fd10] [c00e1eec] free_pgtables+0x12c/0x150
[162980.037118] [c668fd40] [c00eabac] exit_mmap+0xe8/0x1b4
[162980.037210] [c668fda0] [c0019710] mmput.part.9+0x20/0xd8
[162980.037301] [c668fdb0] [c001ecb0] do_exit+0x1f0/0x93c
[162980.037386] [c668fe00] [c001f478] do_group_exit+0x40/0xcc
[162980.037479] [c668fe10] [c002a76c] get_signal+0x47c/0x614
[162980.037570] [c668fe70] [c0007840] do_signal+0x54/0x244
[162980.037654] [c668ff30] [c0007ae8] do_notify_resume+0x34/0x88
[162980.037744] [c668ff40] [c000dae8] do_user_signal+0x74/0xc4
[162980.037781] Instruction dump:
[162980.037821] 7fdff378 81370000 54a3463a 80890020 7d24182e 7c841a14 712a0004 4082ff94
[162980.038014] 2f890000 419e0010 712a0ff0 408200e0 <0fe00000> 54a9000a 7f984840 419d0094
[162980.038216] ---[ end trace c0ceeca8e7a5800a ]---
[162980.038754] BUG: non-zero nr_ptes on freeing mm: 1
[162985.363322] BUG: non-zero nr_ptes on freeing mm: -1
In order to fix this, this patch uses the address space "slices"
implemented for BOOK3S/64 and enhanced to support PPC32 by the
preceding patch.
This patch modifies the context.id on the 8xx to be in the range
[1:16] instead of [0:15] in order to identify context.id == 0 as
not initialised contexts as done on BOOK3S
This patch activates CONFIG_PPC_MM_SLICES when CONFIG_HUGETLB_PAGE is
selected for the 8xx
Alltough we could in theory have as many slices as PMD entries, the
current slices implementation limits the number of low slices to 16.
This limitation is not preventing us to fix the initial issue allthough
it is suboptimal. It will be cured in a subsequent patch.
Fixes: 4b91428699477 ("powerpc/8xx: Implement support of hugepages")
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/mmu-8xx.h | 6 ++++++
arch/powerpc/kernel/setup-common.c | 2 ++
arch/powerpc/mm/8xx_mmu.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 ++
arch/powerpc/mm/mmu_context_nohash.c | 18 ++++++++++++++++--
arch/powerpc/platforms/Kconfig.cputype | 1 +
6 files changed, 28 insertions(+), 3 deletions(-)
--- a/arch/powerpc/include/asm/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -191,6 +191,12 @@ typedef struct {
unsigned int id;
unsigned int active;
unsigned long vdso_base;
+#ifdef CONFIG_PPC_MM_SLICES
+ u16 user_psize; /* page size index */
+ u64 low_slices_psize; /* page size encodings */
+ unsigned char high_slices_psize[0];
+ unsigned long slb_addr_limit;
+#endif
} mm_context_t;
#define PHYS_IMMR_BASE (mfspr(SPRN_IMMR) & 0xfff80000)
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -919,6 +919,8 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_PPC64
if (!radix_enabled())
init_mm.context.slb_addr_limit = DEFAULT_MAP_WINDOW_USER64;
+#elif defined(CONFIG_PPC_8xx)
+ init_mm.context.slb_addr_limit = DEFAULT_MAP_WINDOW;
#else
#error "context.addr_limit not initialized."
#endif
--- a/arch/powerpc/mm/8xx_mmu.c
+++ b/arch/powerpc/mm/8xx_mmu.c
@@ -192,7 +192,7 @@ void set_context(unsigned long id, pgd_t
mtspr(SPRN_M_TW, __pa(pgd) - offset);
/* Update context */
- mtspr(SPRN_M_CASID, id);
+ mtspr(SPRN_M_CASID, id - 1);
/* sync */
mb();
}
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -553,9 +553,11 @@ unsigned long hugetlb_get_unmapped_area(
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+#ifdef CONFIG_PPC_RADIX_MMU
if (radix_enabled())
return radix__hugetlb_get_unmapped_area(file, addr, len,
pgoff, flags);
+#endif
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1);
}
#endif
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -331,6 +331,20 @@ int init_new_context(struct task_struct
{
pr_hard("initing context for mm @%p\n", mm);
+#ifdef CONFIG_PPC_MM_SLICES
+ if (!mm->context.slb_addr_limit)
+ mm->context.slb_addr_limit = DEFAULT_MAP_WINDOW;
+
+ /*
+ * We have MMU_NO_CONTEXT set to be ~0. Hence check
+ * explicitly against context.id == 0. This ensures that we properly
+ * initialize context slice details for newly allocated mm's (which will
+ * have id == 0) and don't alter context slice inherited via fork (which
+ * will have id != 0).
+ */
+ if (mm->context.id == 0)
+ slice_set_user_psize(mm, mmu_virtual_psize);
+#endif
mm->context.id = MMU_NO_CONTEXT;
mm->context.active = 0;
return 0;
@@ -428,8 +442,8 @@ void __init mmu_context_init(void)
* -- BenH
*/
if (mmu_has_feature(MMU_FTR_TYPE_8xx)) {
- first_context = 0;
- last_context = 15;
+ first_context = 1;
+ last_context = 16;
no_selective_tlbil = true;
} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
first_context = 1;
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -326,6 +326,7 @@ config PPC_BOOK3E_MMU
config PPC_MM_SLICES
bool
default y if PPC_BOOK3S_64
+ default y if PPC_8xx && HUGETLB_PAGE
default n
config PPC_HAVE_PMU_SUPPORT
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Cassel <[email protected]>
[ Upstream commit a6b25da5e7ba212af5826a662e6a035a79bffabd ]
According to Documentation/memory-barriers.txt, we need to use a
dma_rmb() after reading the status/own bit, to ensure that all
descriptor fields are read after reading the own bit.
This way, we ensure that the DMA engine is done with the DMA
descriptor before we read the other descriptor fields, e.g. reading
the tx hardware timestamp (if PTP is enabled).
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1843,6 +1843,11 @@ static void stmmac_tx_clean(struct stmma
if (unlikely(status & tx_dma_own))
break;
+ /* Make sure descriptor fields are read after reading
+ * the own bit.
+ */
+ dma_rmb();
+
/* Just consider the last segment and ...*/
if (likely(!(status & tx_not_ls))) {
/* ... verify the status error condition */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit db3a528db41caaa6dfd4c64e9f5efb1c81a80467 upstream.
In preparation for the following patch which will fix an issue on
the 8xx by re-using the 'slices', this patch enhances the
'slices' implementation to support 32 bits CPUs.
On PPC32, the address space is limited to 4Gbytes, hence only the low
slices will be used.
The high slices use bitmaps. As bitmap functions are not prepared to
handle bitmaps of size 0, this patch ensures that bitmap functions
are called only when SLICE_NUM_HIGH is not nul.
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/nohash/32/slice.h | 18 ++++++++++++++
arch/powerpc/include/asm/slice.h | 4 ++-
arch/powerpc/mm/slice.c | 37 ++++++++++++++++++++++-------
3 files changed, 50 insertions(+), 9 deletions(-)
--- /dev/null
+++ b/arch/powerpc/include/asm/nohash/32/slice.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_NOHASH_32_SLICE_H
+#define _ASM_POWERPC_NOHASH_32_SLICE_H
+
+#ifdef CONFIG_PPC_MM_SLICES
+
+#define SLICE_LOW_SHIFT 28
+#define SLICE_LOW_TOP (0x100000000ull)
+#define SLICE_NUM_LOW (SLICE_LOW_TOP >> SLICE_LOW_SHIFT)
+#define GET_LOW_SLICE_INDEX(addr) ((addr) >> SLICE_LOW_SHIFT)
+
+#define SLICE_HIGH_SHIFT 0
+#define SLICE_NUM_HIGH 0ul
+#define GET_HIGH_SLICE_INDEX(addr) (addr & 0)
+
+#endif /* CONFIG_PPC_MM_SLICES */
+
+#endif /* _ASM_POWERPC_NOHASH_32_SLICE_H */
--- a/arch/powerpc/include/asm/slice.h
+++ b/arch/powerpc/include/asm/slice.h
@@ -4,8 +4,10 @@
#ifdef CONFIG_PPC_BOOK3S_64
#include <asm/book3s/64/slice.h>
-#else
+#elif defined(CONFIG_PPC64)
#include <asm/nohash/64/slice.h>
+#elif defined(CONFIG_PPC_MMU_NOHASH)
+#include <asm/nohash/32/slice.h>
#endif
#ifdef CONFIG_PPC_MM_SLICES
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -73,10 +73,12 @@ static void slice_range_to_mask(unsigned
unsigned long end = start + len - 1;
ret->low_slices = 0;
- bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
+ if (SLICE_NUM_HIGH)
+ bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
if (start < SLICE_LOW_TOP) {
- unsigned long mend = min(end, (SLICE_LOW_TOP - 1));
+ unsigned long mend = min(end,
+ (unsigned long)(SLICE_LOW_TOP - 1));
ret->low_slices = (1u << (GET_LOW_SLICE_INDEX(mend) + 1))
- (1u << GET_LOW_SLICE_INDEX(start));
@@ -113,11 +115,13 @@ static int slice_high_has_vma(struct mm_
unsigned long start = slice << SLICE_HIGH_SHIFT;
unsigned long end = start + (1ul << SLICE_HIGH_SHIFT);
+#ifdef CONFIG_PPC64
/* Hack, so that each addresses is controlled by exactly one
* of the high or low area bitmaps, the first high area starts
* at 4GB, not 0 */
if (start == 0)
start = SLICE_LOW_TOP;
+#endif
return !slice_area_is_free(mm, start, end - start);
}
@@ -128,7 +132,8 @@ static void slice_mask_for_free(struct m
unsigned long i;
ret->low_slices = 0;
- bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
+ if (SLICE_NUM_HIGH)
+ bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
for (i = 0; i < SLICE_NUM_LOW; i++)
if (!slice_low_has_vma(mm, i))
@@ -151,7 +156,8 @@ static void slice_mask_for_size(struct m
u64 lpsizes;
ret->low_slices = 0;
- bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
+ if (SLICE_NUM_HIGH)
+ bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
lpsizes = mm->context.low_slices_psize;
for (i = 0; i < SLICE_NUM_LOW; i++)
@@ -180,6 +186,10 @@ static int slice_check_fit(struct mm_str
*/
unsigned long slice_count = GET_HIGH_SLICE_INDEX(mm->context.slb_addr_limit);
+ if (!SLICE_NUM_HIGH)
+ return (mask.low_slices & available.low_slices) ==
+ mask.low_slices;
+
bitmap_and(result, mask.high_slices,
available.high_slices, slice_count);
@@ -189,6 +199,7 @@ static int slice_check_fit(struct mm_str
static void slice_flush_segments(void *parm)
{
+#ifdef CONFIG_PPC64
struct mm_struct *mm = parm;
unsigned long flags;
@@ -200,6 +211,7 @@ static void slice_flush_segments(void *p
local_irq_save(flags);
slb_flush_and_rebolt();
local_irq_restore(flags);
+#endif
}
static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psize)
@@ -389,6 +401,8 @@ static unsigned long slice_find_area(str
static inline void slice_or_mask(struct slice_mask *dst, struct slice_mask *src)
{
dst->low_slices |= src->low_slices;
+ if (!SLICE_NUM_HIGH)
+ return;
bitmap_or(dst->high_slices, dst->high_slices, src->high_slices,
SLICE_NUM_HIGH);
}
@@ -397,6 +411,8 @@ static inline void slice_andnot_mask(str
{
dst->low_slices &= ~src->low_slices;
+ if (!SLICE_NUM_HIGH)
+ return;
bitmap_andnot(dst->high_slices, dst->high_slices, src->high_slices,
SLICE_NUM_HIGH);
}
@@ -446,14 +462,17 @@ unsigned long slice_get_unmapped_area(un
* init different masks
*/
mask.low_slices = 0;
- bitmap_zero(mask.high_slices, SLICE_NUM_HIGH);
/* silence stupid warning */;
potential_mask.low_slices = 0;
- bitmap_zero(potential_mask.high_slices, SLICE_NUM_HIGH);
compat_mask.low_slices = 0;
- bitmap_zero(compat_mask.high_slices, SLICE_NUM_HIGH);
+
+ if (SLICE_NUM_HIGH) {
+ bitmap_zero(mask.high_slices, SLICE_NUM_HIGH);
+ bitmap_zero(potential_mask.high_slices, SLICE_NUM_HIGH);
+ bitmap_zero(compat_mask.high_slices, SLICE_NUM_HIGH);
+ }
/* Sanity checks */
BUG_ON(mm->task_size == 0);
@@ -591,7 +610,9 @@ unsigned long slice_get_unmapped_area(un
convert:
slice_andnot_mask(&mask, &good_mask);
slice_andnot_mask(&mask, &compat_mask);
- if (mask.low_slices || !bitmap_empty(mask.high_slices, SLICE_NUM_HIGH)) {
+ if (mask.low_slices ||
+ (SLICE_NUM_HIGH &&
+ !bitmap_empty(mask.high_slices, SLICE_NUM_HIGH))) {
slice_convert(mm, mask, psize);
if (psize > MMU_PAGE_BASE)
on_each_cpu(slice_flush_segments, mm, 1);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ravikumar Kattekola <[email protected]>
[ Upstream commit f4aa1bd5b4fc80f5f4ecd184caad832fd62c25f7 ]
Correct vpo_sd_1v8_3v3 regulator max voltage to 3.3V
Fixes: 9868bc585ae2 ("ARM: dts: Add support for dra718-evm")
Signed-off-by: Ravikumar Kattekola <[email protected]>
Signed-off-by: Sekhar Nori <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/dra71-evm.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -24,13 +24,13 @@
regulator-name = "vddshv8";
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
vin-supply = <&evm_5v0>;
gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
states = <1800000 0x0
- 3000000 0x1>;
+ 3300000 0x1>;
};
evm_1v8_sw: fixedregulator-evm_1v8 {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Cassel <[email protected]>
[ Upstream commit 15d2ee42a3087089e73ad52fd8c1b37ab496b87c ]
A dma_wmb() is used to guarantee the ordering, with respect to
other writes, to cache coherent DMA memory.
There is a dma_wmb() in prepare_tx_desc()/prepare_tso_tx_desc() which
ensures that TDES0/1/2 is written before TDES3 (which contains the own
bit), for First Desc.
However, in the rare case that MSS changes, there will be a MSS
context descriptor in front of the regular DMA descriptors:
<MSS desc> <- DMA Next Descriptor
<First Desc>
<desc n>
<Last Desc>
Thus, for this special case, we need a dma_wmb()
after prepare_tso_tx_desc()/before writing the own bit to the MSS desc,
so that we flush the write to TDES3 for First Desc,
in order to ensure that the MSS descriptor is the last descriptor to
set the own bit.
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2985,8 +2985,15 @@ static netdev_tx_t stmmac_tso_xmit(struc
tcp_hdrlen(skb) / 4, (skb->len - proto_hdr_len));
/* If context desc is used to change MSS */
- if (mss_desc)
+ if (mss_desc) {
+ /* Make sure that first descriptor has been completely
+ * written, including its own bit. This is because MSS is
+ * actually before first descriptor, so we need to make
+ * sure that MSS's own bit is the last thing written.
+ */
+ dma_wmb();
priv->hw->desc->set_tx_owner(mss_desc);
+ }
/* The own bit must be the latest setting done when prepare the
* descriptor and then barrier is needed to make sure that
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <[email protected]>
[ Upstream commit 215003b4ae1d47035092fef73b6a22aa82037091 ]
There's no reason to delay initialization of most of the driver (such as
mapping memory I/O, getting clocks or enabling runtime PM) to the
component master bind handler.
This additionally fixes a real PM issue caused enabling runtime PM in
the bind handler.
The bind handler performs the following sequence of PM operations:
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
... (access the hardware to read the device revision) ...
pm_runtime_put_sync(dev);
If a failure occurs at this point, the error path calls
pm_runtime_disable() to balance the pm_runtime_enable() call.
To understand the problem, it should be noted that the bind handler is
called when one of the component registers itself, which happens in the
component's probe handler. Furthermore, as the components are children
of the DSS, the device core calls pm_runtime_get_sync() on the DSS
platform device before calling the component's probe handler. This
increases the DSS power usage count but doesn't runtime resume the
device, as runtime PM is disabled at that point.
The bind handler is thus called with runtime PM disabled, with the
device runtime suspended, but with the power usage count larger than 0.
The pm_runtime_get_sync() call will thus further increase the power
usage count and runtime resume the device. The pm_runtime_put_sync()
handler will decrease the power usage count to a non-zero value and will
thus not suspend the device. Finally, the pm_runtime_disable() call will
disable runtime PM, preventing the pm_runtime_put() call in the device
core from runtime suspending the device. The DSS device is thus left
powered on.
To fix this, move the initialization code from the bind handler to the
probe handler.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/omapdrm/dss/dss.c | 193 ++++++++++++++++++++------------------
1 file changed, 104 insertions(+), 89 deletions(-)
--- a/drivers/gpu/drm/omapdrm/dss/dss.c
+++ b/drivers/gpu/drm/omapdrm/dss/dss.c
@@ -1300,88 +1300,18 @@ static const struct soc_device_attribute
static int dss_bind(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *dss_mem;
- u32 rev;
int r;
- dss_mem = platform_get_resource(dss.pdev, IORESOURCE_MEM, 0);
- dss.base = devm_ioremap_resource(&pdev->dev, dss_mem);
- if (IS_ERR(dss.base))
- return PTR_ERR(dss.base);
-
- r = dss_get_clocks();
+ r = component_bind_all(dev, NULL);
if (r)
return r;
- r = dss_setup_default_clock();
- if (r)
- goto err_setup_clocks;
-
- r = dss_video_pll_probe(pdev);
- if (r)
- goto err_pll_init;
-
- r = dss_init_ports(pdev);
- if (r)
- goto err_init_ports;
-
- pm_runtime_enable(&pdev->dev);
-
- r = dss_runtime_get();
- if (r)
- goto err_runtime_get;
-
- dss.dss_clk_rate = clk_get_rate(dss.dss_clk);
-
- /* Select DPLL */
- REG_FLD_MOD(DSS_CONTROL, 0, 0, 0);
-
- dss_select_dispc_clk_source(DSS_CLK_SRC_FCK);
-
-#ifdef CONFIG_OMAP2_DSS_VENC
- REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */
- REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */
- REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */
-#endif
- dss.dsi_clk_source[0] = DSS_CLK_SRC_FCK;
- dss.dsi_clk_source[1] = DSS_CLK_SRC_FCK;
- dss.dispc_clk_source = DSS_CLK_SRC_FCK;
- dss.lcd_clk_source[0] = DSS_CLK_SRC_FCK;
- dss.lcd_clk_source[1] = DSS_CLK_SRC_FCK;
-
- rev = dss_read_reg(DSS_REVISION);
- pr_info("OMAP DSS rev %d.%d\n", FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
-
- dss_runtime_put();
-
- r = component_bind_all(&pdev->dev, NULL);
- if (r)
- goto err_component;
-
- dss_debugfs_create_file("dss", dss_dump_regs);
-
pm_set_vt_switch(0);
omapdss_gather_components(dev);
omapdss_set_is_initialized(true);
return 0;
-
-err_component:
-err_runtime_get:
- pm_runtime_disable(&pdev->dev);
- dss_uninit_ports(pdev);
-err_init_ports:
- if (dss.video1_pll)
- dss_video_pll_uninit(dss.video1_pll);
-
- if (dss.video2_pll)
- dss_video_pll_uninit(dss.video2_pll);
-err_pll_init:
-err_setup_clocks:
- dss_put_clocks();
- return r;
}
static void dss_unbind(struct device *dev)
@@ -1391,18 +1321,6 @@ static void dss_unbind(struct device *de
omapdss_set_is_initialized(false);
component_unbind_all(&pdev->dev, NULL);
-
- if (dss.video1_pll)
- dss_video_pll_uninit(dss.video1_pll);
-
- if (dss.video2_pll)
- dss_video_pll_uninit(dss.video2_pll);
-
- dss_uninit_ports(pdev);
-
- pm_runtime_disable(&pdev->dev);
-
- dss_put_clocks();
}
static const struct component_master_ops dss_component_ops = {
@@ -1434,10 +1352,46 @@ static int dss_add_child_component(struc
return 0;
}
+static int dss_probe_hardware(void)
+{
+ u32 rev;
+ int r;
+
+ r = dss_runtime_get();
+ if (r)
+ return r;
+
+ dss.dss_clk_rate = clk_get_rate(dss.dss_clk);
+
+ /* Select DPLL */
+ REG_FLD_MOD(DSS_CONTROL, 0, 0, 0);
+
+ dss_select_dispc_clk_source(DSS_CLK_SRC_FCK);
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+ REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */
+ REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */
+ REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */
+#endif
+ dss.dsi_clk_source[0] = DSS_CLK_SRC_FCK;
+ dss.dsi_clk_source[1] = DSS_CLK_SRC_FCK;
+ dss.dispc_clk_source = DSS_CLK_SRC_FCK;
+ dss.lcd_clk_source[0] = DSS_CLK_SRC_FCK;
+ dss.lcd_clk_source[1] = DSS_CLK_SRC_FCK;
+
+ rev = dss_read_reg(DSS_REVISION);
+ pr_info("OMAP DSS rev %d.%d\n", FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+ dss_runtime_put();
+
+ return 0;
+}
+
static int dss_probe(struct platform_device *pdev)
{
const struct soc_device_attribute *soc;
struct component_match *match = NULL;
+ struct resource *dss_mem;
int r;
dss.pdev = pdev;
@@ -1458,20 +1412,69 @@ static int dss_probe(struct platform_dev
else
dss.feat = of_match_device(dss_of_match, &pdev->dev)->data;
- r = dss_initialize_debugfs();
+ /* Map I/O registers, get and setup clocks. */
+ dss_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dss.base = devm_ioremap_resource(&pdev->dev, dss_mem);
+ if (IS_ERR(dss.base))
+ return PTR_ERR(dss.base);
+
+ r = dss_get_clocks();
if (r)
return r;
- /* add all the child devices as components */
+ r = dss_setup_default_clock();
+ if (r)
+ goto err_put_clocks;
+
+ /* Setup the video PLLs and the DPI and SDI ports. */
+ r = dss_video_pll_probe(pdev);
+ if (r)
+ goto err_put_clocks;
+
+ r = dss_init_ports(pdev);
+ if (r)
+ goto err_uninit_plls;
+
+ /* Enable runtime PM and probe the hardware. */
+ pm_runtime_enable(&pdev->dev);
+
+ r = dss_probe_hardware();
+ if (r)
+ goto err_pm_runtime_disable;
+
+ /* Initialize debugfs. */
+ r = dss_initialize_debugfs();
+ if (r)
+ goto err_pm_runtime_disable;
+
+ dss_debugfs_create_file("dss", dss_dump_regs);
+
+ /* Add all the child devices as components. */
device_for_each_child(&pdev->dev, &match, dss_add_child_component);
r = component_master_add_with_match(&pdev->dev, &dss_component_ops, match);
- if (r) {
- dss_uninitialize_debugfs();
- return r;
- }
+ if (r)
+ goto err_uninit_debugfs;
return 0;
+
+err_uninit_debugfs:
+ dss_uninitialize_debugfs();
+
+err_pm_runtime_disable:
+ pm_runtime_disable(&pdev->dev);
+ dss_uninit_ports(pdev);
+
+err_uninit_plls:
+ if (dss.video1_pll)
+ dss_video_pll_uninit(dss.video1_pll);
+ if (dss.video2_pll)
+ dss_video_pll_uninit(dss.video2_pll);
+
+err_put_clocks:
+ dss_put_clocks();
+
+ return r;
}
static int dss_remove(struct platform_device *pdev)
@@ -1480,6 +1483,18 @@ static int dss_remove(struct platform_de
dss_uninitialize_debugfs();
+ pm_runtime_disable(&pdev->dev);
+
+ dss_uninit_ports(pdev);
+
+ if (dss.video1_pll)
+ dss_video_pll_uninit(dss.video1_pll);
+
+ if (dss.video2_pll)
+ dss_video_pll_uninit(dss.video2_pll);
+
+ dss_put_clocks();
+
return 0;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
[ Upstream commit b24b6478e65f140610ab1ffaadc7bc6bf0be8aad ]
Ideally the de-allocation of resources should happen in the exact
opposite order in which they were allocated. It helps maintain the code
in long term, even if nothing really breaks with incorrect ordering.
That wasn't followed in cpufreq_online() and it has some
inconsistencies. For example, the symlinks were created from within
the locked region while they are removed only after putting the locks.
Also ->exit() should have been called only after the symlinks are
removed and the lock is dropped, as that was the case when ->init()
was first called.
Signed-off-by: Viresh Kumar <[email protected]>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/cpufreq.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1327,14 +1327,14 @@ static int cpufreq_online(unsigned int c
return 0;
out_exit_policy:
+ for_each_cpu(j, policy->real_cpus)
+ remove_cpu_dev_symlink(policy, get_cpu_device(j));
+
up_write(&policy->rwsem);
if (cpufreq_driver->exit)
cpufreq_driver->exit(policy);
- for_each_cpu(j, policy->real_cpus)
- remove_cpu_dev_symlink(policy, get_cpu_device(j));
-
out_free_policy:
cpufreq_policy_free(policy);
return ret;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 48d163b1aa6e7f650c0b7a4f9c61c387a6def868 ]
When Linux is master of BAM, it can directly read registers to know number
of supported channels, however when its remotely controlled reading these
registers would trigger a crash if the BAM is not yet initialized or
powered up on the remote side.
This patch allows driver to read num-channels and num-ees from Device Tree
for remotely controlled BAM.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/qcom/bam_dma.c | 27 ++++++++++++++++++++++-----
1 file changed, 22 insertions(+), 5 deletions(-)
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -393,6 +393,7 @@ struct bam_device {
struct device_dma_parameters dma_parms;
struct bam_chan *channels;
u32 num_channels;
+ u32 num_ees;
/* execution environment ID, from DT */
u32 ee;
@@ -1128,15 +1129,19 @@ static int bam_init(struct bam_device *b
u32 val;
/* read revision and configuration information */
- val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)) >> NUM_EES_SHIFT;
- val &= NUM_EES_MASK;
+ if (!bdev->num_ees) {
+ val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION));
+ bdev->num_ees = (val >> NUM_EES_SHIFT) & NUM_EES_MASK;
+ }
/* check that configured EE is within range */
- if (bdev->ee >= val)
+ if (bdev->ee >= bdev->num_ees)
return -EINVAL;
- val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
- bdev->num_channels = val & BAM_NUM_PIPES_MASK;
+ if (!bdev->num_channels) {
+ val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
+ bdev->num_channels = val & BAM_NUM_PIPES_MASK;
+ }
if (bdev->controlled_remotely)
return 0;
@@ -1232,6 +1237,18 @@ static int bam_dma_probe(struct platform
bdev->controlled_remotely = of_property_read_bool(pdev->dev.of_node,
"qcom,controlled-remotely");
+ if (bdev->controlled_remotely) {
+ ret = of_property_read_u32(pdev->dev.of_node, "num-channels",
+ &bdev->num_channels);
+ if (ret)
+ dev_err(bdev->dev, "num-channels unspecified in dt\n");
+
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,num-ees",
+ &bdev->num_ees);
+ if (ret)
+ dev_err(bdev->dev, "num-ees unspecified in dt\n");
+ }
+
bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk");
if (IS_ERR(bdev->bamclk))
return PTR_ERR(bdev->bamclk);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maurizio Lombardi <[email protected]>
[ Upstream commit 2bbea6e117357d17842114c65e9a9cf2d13ae8a3 ]
when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.
PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount"
#0 [ffff880078447ae0] __schedule at ffffffff8168d605
#1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49
#2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995
#3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef
#4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod]
#5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50
#6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3
#7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs]
#8 [ffff880078447da8] mount_bdev at ffffffff81202570
#9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs]
#10 [ffff880078447e28] mount_fs at ffffffff81202d09
#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f
#12 [ffff880078447ea8] do_mount at ffffffff81220fee
#13 [ffff880078447f28] sys_mount at ffffffff812218d6
#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49
RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246
RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010
RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30
RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010
R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040
R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30
ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b
This task was trying to mount the cdrom. It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.
PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd"
#0 [ffff880078417898] __schedule at ffffffff8168d605
#1 [ffff880078417900] schedule at ffffffff8168dc59
#2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605
#3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838
#4 [ffff8800784179d0] down_read at ffffffff8168cde0
#5 [ffff8800784179e8] get_super at ffffffff81201cc7
#6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de
#7 [ffff880078417a40] flush_disk at ffffffff8123a94b
#8 [ffff880078417a88] check_disk_change at ffffffff8123ab50
#9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom]
#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod]
#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86
#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65
#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b
#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7
#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf
#16 [ffff880078417d00] do_last at ffffffff8120d53d
#17 [ffff880078417db0] path_openat at ffffffff8120e6b2
#18 [ffff880078417e48] do_filp_open at ffffffff8121082b
#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33
#20 [ffff880078417f70] sys_open at ffffffff811fde4e
#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49
RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246
RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000
RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70
RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020
R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e
R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010
ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b
This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.
The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.
This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.
Signed-off-by: Maurizio Lombardi <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/paride/pcd.c | 2 ++
drivers/cdrom/cdrom.c | 3 ---
drivers/cdrom/gdrom.c | 3 +++
drivers/ide/ide-cd.c | 2 ++
drivers/scsi/sr.c | 2 ++
5 files changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -230,6 +230,8 @@ static int pcd_block_open(struct block_d
struct pcd_unit *cd = bdev->bd_disk->private_data;
int ret;
+ check_disk_change(bdev);
+
mutex_lock(&pcd_mutex);
ret = cdrom_open(&cd->info, bdev, mode);
mutex_unlock(&pcd_mutex);
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -1152,9 +1152,6 @@ int cdrom_open(struct cdrom_device_info
cd_dbg(CD_OPEN, "entering cdrom_open\n");
- /* open is event synchronization point, check events first */
- check_disk_change(bdev);
-
/* if this was a O_NONBLOCK open and we should honor the flags,
* do a quick open without drive/disc integrity checks. */
cdi->use_count++;
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -497,6 +497,9 @@ static const struct cdrom_device_ops gdr
static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode)
{
int ret;
+
+ check_disk_change(bdev);
+
mutex_lock(&gdrom_mutex);
ret = cdrom_open(gd.cd_info, bdev, mode);
mutex_unlock(&gdrom_mutex);
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1613,6 +1613,8 @@ static int idecd_open(struct block_devic
struct cdrom_info *info;
int rc = -ENXIO;
+ check_disk_change(bdev);
+
mutex_lock(&ide_cd_mutex);
info = ide_cd_get(bdev->bd_disk);
if (!info)
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -525,6 +525,8 @@ static int sr_block_open(struct block_de
struct scsi_cd *cd;
int ret = -ENXIO;
+ check_disk_change(bdev);
+
mutex_lock(&sr_mutex);
cd = scsi_cd_get(bdev->bd_disk);
if (cd) {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Rutland <[email protected]>
[ Upstream commit 6b31a2fa1e8f7bc6c2a474b4a12dad7a145cf83d ]
Currently the arm/arm64 runtime code registers the runtime servies
pagetables with ptdump regardless of whether runtime services page
tables have been created.
As efi_mm.pgd is NULL in these cases, attempting to dump the efi page
tables results in a NULL pointer dereference in the ptdump code:
/sys/kernel/debug# cat efi_page_tables
[ 479.522600] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 479.522715] Mem abort info:
[ 479.522764] ESR = 0x96000006
[ 479.522850] Exception class = DABT (current EL), IL = 32 bits
[ 479.522899] SET = 0, FnV = 0
[ 479.522937] EA = 0, S1PTW = 0
[ 479.528200] Data abort info:
[ 479.528230] ISV = 0, ISS = 0x00000006
[ 479.528317] CM = 0, WnR = 0
[ 479.528317] user pgtable: 4k pages, 48-bit VAs, pgd = 0000000064ab0cb0
[ 479.528449] [0000000000000000] *pgd=00000000fbbe4003, *pud=00000000fb66e003, *pmd=0000000000000000
[ 479.528600] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 479.528664] Modules linked in:
[ 479.528699] CPU: 0 PID: 2457 Comm: cat Not tainted 4.15.0-rc3-00065-g2ad2ee7ecb5c-dirty #7
[ 479.528799] Hardware name: FVP Base (DT)
[ 479.528899] pstate: 00400009 (nzcv daif +PAN -UAO)
[ 479.528941] pc : walk_pgd.isra.1+0x20/0x1d0
[ 479.529011] lr : ptdump_walk_pgd+0x30/0x50
[ 479.529105] sp : ffff00000bf4bc20
[ 479.529185] x29: ffff00000bf4bc20 x28: 0000ffff9d22e000
[ 479.529271] x27: 0000000000020000 x26: ffff80007b4c63c0
[ 479.529358] x25: 00000000014000c0 x24: ffff80007c098900
[ 479.529445] x23: ffff00000bf4beb8 x22: 0000000000000000
[ 479.529532] x21: ffff00000bf4bd70 x20: 0000000000000001
[ 479.529618] x19: ffff00000bf4bcb0 x18: 0000000000000000
[ 479.529760] x17: 000000000041a1c8 x16: ffff0000082139d8
[ 479.529800] x15: 0000ffff9d3c6030 x14: 0000ffff9d2527f4
[ 479.529924] x13: 00000000000003f3 x12: 0000000000000038
[ 479.530000] x11: 0000000000000003 x10: 0101010101010101
[ 479.530099] x9 : 0000000017e94050 x8 : 000000000000003f
[ 479.530226] x7 : 0000000000000000 x6 : 0000000000000000
[ 479.530313] x5 : 0000000000000001 x4 : 0000000000000000
[ 479.530416] x3 : ffff000009069fd8 x2 : 0000000000000000
[ 479.530500] x1 : 0000000000000000 x0 : 0000000000000000
[ 479.530599] Process cat (pid: 2457, stack limit = 0x000000005d1b0e6f)
[ 479.530660] Call trace:
[ 479.530746] walk_pgd.isra.1+0x20/0x1d0
[ 479.530833] ptdump_walk_pgd+0x30/0x50
[ 479.530907] ptdump_show+0x10/0x20
[ 479.530920] seq_read+0xc8/0x470
[ 479.531023] full_proxy_read+0x60/0x90
[ 479.531100] __vfs_read+0x18/0x100
[ 479.531180] vfs_read+0x88/0x160
[ 479.531267] SyS_read+0x48/0xb0
[ 479.531299] el0_svc_naked+0x20/0x24
[ 479.531400] Code: 91400420 f90033a0 a90707a2 f9403fa0 (f9400000)
[ 479.531499] ---[ end trace bfe8e28d8acb2b67 ]---
Segmentation fault
Let's avoid this problem by only registering the tables after their
successful creation, which is also less confusing when EFI runtime
services are not in use.
Reported-by: Will Deacon <[email protected]>
Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/arm-runtime.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/firmware/efi/arm-runtime.c
+++ b/drivers/firmware/efi/arm-runtime.c
@@ -54,6 +54,9 @@ static struct ptdump_info efi_ptdump_inf
static int __init ptdump_init(void)
{
+ if (!efi_enabled(EFI_RUNTIME_SERVICES))
+ return 0;
+
return ptdump_debugfs_register(&efi_ptdump_info, "efi_page_tables");
}
device_initcall(ptdump_init);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kan Liang <[email protected]>
[ Upstream commit 82d71ed0277efc45360828af8c4e4d40e1b45352 ]
The PMU is disabled in intel_pmu_handle_irq(), but cpuc->enabled is not updated
accordingly.
This is fine in current usage because no-one checks it - but fix it
for future code: for example, the drain_pebs() will be modified to
fix an auto-reload bug.
Properly save/restore the old PMU state.
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Cc: kernel test robot <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/intel/core.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2201,16 +2201,23 @@ static int intel_pmu_handle_irq(struct p
int bit, loops;
u64 status;
int handled;
+ int pmu_enabled;
cpuc = this_cpu_ptr(&cpu_hw_events);
/*
+ * Save the PMU state.
+ * It needs to be restored when leaving the handler.
+ */
+ pmu_enabled = cpuc->enabled;
+ /*
* No known reason to not always do late ACK,
* but just in case do it opt-in.
*/
if (!x86_pmu.late_ack)
apic_write(APIC_LVTPC, APIC_DM_NMI);
intel_bts_disable_local();
+ cpuc->enabled = 0;
__intel_pmu_disable_all();
handled = intel_pmu_drain_bts_buffer();
handled += intel_bts_interrupt();
@@ -2320,7 +2327,8 @@ again:
done:
/* Only restore PMU state when it's active. See x86_pmu_disable(). */
- if (cpuc->enabled)
+ cpuc->enabled = pmu_enabled;
+ if (pmu_enabled)
__intel_pmu_enable_all(0, true);
intel_bts_enable_local();
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Anholt <[email protected]>
[ Upstream commit 5651e5e094591f479adad5830ac1bc45196a39b3 ]
This fixes bad color output. When I was first testing the device I
had the DPI hardware set to 666 mode, but apparently in the refactor
to use the bus_format information from the panel driver, I failed to
actually update the panel.
Signed-off-by: Eric Anholt <[email protected]>
Fixes: e8b6f561b2ee ("drm/panel: simple: Add the 7" DPI panel from Adafruit")
Cc: Thierry Reding <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/panel/panel-simple.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1597,7 +1597,7 @@ static const struct panel_desc ontat_yx7
.width = 154,
.height = 83,
},
- .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
static const struct drm_display_mode ortustech_com43h4m85ulc_mode = {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
[ Upstream commit a46f8cd696624ef757be0311eb28f119c36778e8 ]
A negative page register value means that no page needs to be
selected. This is used by status register evaluations and needs
to be accepted.
Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver")
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/pmbus/max8688.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hwmon/pmbus/max8688.c
+++ b/drivers/hwmon/pmbus/max8688.c
@@ -45,7 +45,7 @@ static int max8688_read_word_data(struct
{
int ret;
- if (page)
+ if (page > 0)
return -ENXIO;
switch (reg) {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qi Hou <[email protected]>
[ Upstream commit a3ca831249ca8c4c226e4ceafee04e280152e59d ]
When booting up with "threadirqs" in command line, all irq handlers of the DMA
controller pl330 will be threaded forcedly. These threads will race for the same
list, pl330->req_done.
Before the callback, the spinlock was released. And after it, the spinlock was
taken. This opened an race window where another threaded irq handler could steal
the spinlock and be permitted to delete entries of the list, pl330->req_done.
If the later deleted an entry that was still referred to by the former, there would
be a kernel panic when the former was scheduled and tried to get the next sibling
of the deleted entry.
The scenario could be depicted as below:
Thread: T1 pl330->req_done Thread: T2
| | |
| -A-B-C-D- |
Locked | |
| | Waiting
Del A | |
| -B-C-D- |
Unlocked | |
| | Locked
Waiting | |
| | Del B
| | |
| -C-D- Unlocked
Waiting | |
|
Locked
|
get C via B
\
- Kernel panic
The kernel panic looked like as below:
Unable to handle kernel paging request at virtual address dead000000000108
pgd = ffffff8008c9e000
[dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000
Internal error: Oops: 96000044 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2
Hardware name: Broadcom NS2 SVK (DT)
task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000
PC is at pl330_irq_handler+0x27c/0x390
LR is at pl330_irq_handler+0x2a8/0x390
pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5
sp : ffffffc1f5ce3d00
x29: ffffffc1f5ce3d00 x28: 0000000000000140
x27: ffffffc1f5c530b0 x26: dead000000000100
x25: dead000000000200 x24: 0000000000418958
x23: 0000000000000001 x22: ffffffc1f5ccd668
x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418
x19: dead000000000060 x18: 0000000000000001
x17: 0000000000000007 x16: 0000000000000001
x15: ffffffffffffffff x14: ffffffffffffffff
x13: ffffffffffffffff x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000840
x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338
x7 : ffffff8008ce2020 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000001
x3 : dead000000000200 x2 : dead000000000100
x1 : 0000000000000140 x0 : ffffffc1f5ccd590
Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020)
Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000)
3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600
3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998
3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000
3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0
3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001
3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8
3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00
3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000
3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68
3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80
3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648
3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00
3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90
3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0
3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000
3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8
Call trace:
Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60)
3b20: dead000000000060 0000008000000000
3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88
3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4
3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc
3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000
3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140
3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000
3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000
3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff
3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007
[<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390
[<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88
[<ffffff80080f0d70>] irq_thread+0x140/0x200
[<ffffff80080bf4f8>] kthread+0xd8/0xf0
[<ffffff8008083690>] ret_from_fork+0x10/0x40
Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443)
---[ end trace f50005726d31199c ]---
Kernel panic - not syncing: Fatal exception in interrupt
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 0-1
Kernel Offset: disabled
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception in interrupt
To fix this, re-start with the list-head after dropping the lock then
re-takeing it.
Reviewed-by: Frank Mori Hess <[email protected]>
Tested-by: Frank Mori Hess <[email protected]>
Signed-off-by: Qi Hou <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/pl330.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1510,7 +1510,7 @@ static void pl330_dotask(unsigned long d
/* Returns 1 if state was updated, 0 otherwise */
static int pl330_update(struct pl330_dmac *pl330)
{
- struct dma_pl330_desc *descdone, *tmp;
+ struct dma_pl330_desc *descdone;
unsigned long flags;
void __iomem *regs;
u32 val;
@@ -1588,7 +1588,9 @@ static int pl330_update(struct pl330_dma
}
/* Now that we are in no hurry, do the callbacks */
- list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
+ while (!list_empty(&pl330->req_done)) {
+ descdone = list_first_entry(&pl330->req_done,
+ struct dma_pl330_desc, rqd);
list_del(&descdone->rqd);
spin_unlock_irqrestore(&pl330->lock, flags);
dma_pl330_rqcb(descdone, PL330_ERR_NONE);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dexuan Cui <[email protected]>
[ Upstream commit 1330fc35327f3ecdfa1aa645e7321ced7349b2cd ]
This patch fixes the below warnings with new glibc and gcc:
hv_vss_daemon.c:100:13: warning: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is currently
defined by <sys/types.h> as well, but we plan to remove this soon.
To use "major", include <sys/sysmacros.h> directly.
hv_fcopy_daemon.c:42:2: note: 'snprintf' output between 2 and 1040
bytes into a destination of size 260
Signed-off-by: Dexuan Cui <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: K. Y. Srinivasan <[email protected]>
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/hv/hv_fcopy_daemon.c | 3 ++-
tools/hv/hv_vss_daemon.c | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/tools/hv/hv_fcopy_daemon.c
+++ b/tools/hv/hv_fcopy_daemon.c
@@ -23,13 +23,14 @@
#include <unistd.h>
#include <errno.h>
#include <linux/hyperv.h>
+#include <linux/limits.h>
#include <syslog.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <getopt.h>
static int target_fd;
-static char target_fname[W_MAX_PATH];
+static char target_fname[PATH_MAX];
static unsigned long long filesize;
static int hv_start_fcopy(struct hv_start_fcopy *smsg)
--- a/tools/hv/hv_vss_daemon.c
+++ b/tools/hv/hv_vss_daemon.c
@@ -22,6 +22,7 @@
#include <sys/poll.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
+#include <sys/sysmacros.h>
#include <fcntl.h>
#include <stdio.h>
#include <mntent.h>
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
[ Upstream commit 9e5b127d6f33468143d90c8a45ca12410e4c3fa7 ]
Mark reported his arm64 perf fuzzer runs sometimes splat like:
armv8pmu_read_counter+0x1e8/0x2d8
armpmu_event_update+0x8c/0x188
armpmu_read+0xc/0x18
perf_output_read+0x550/0x11e8
perf_event_read_event+0x1d0/0x248
perf_event_exit_task+0x468/0xbb8
do_exit+0x690/0x1310
do_group_exit+0xd0/0x2b0
get_signal+0x2e8/0x17a8
do_signal+0x144/0x4f8
do_notify_resume+0x148/0x1e8
work_pending+0x8/0x14
which asserts that we only call pmu::read() on ACTIVE events.
The above callchain does:
perf_event_exit_task()
perf_event_exit_task_context()
task_ctx_sched_out() // INACTIVE
perf_event_exit_event()
perf_event_set_state(EXIT) // EXIT
sync_child_event()
perf_event_read_event()
perf_output_read()
perf_output_read_group()
leader->pmu->read()
Which results in doing a pmu::read() on an !ACTIVE event.
I _think_ this is 'new' since we added attr.inherit_stat, which added
the perf_event_read_event() to the exit path, without that
perf_event_read_output() would only trigger from samples and for
@event to trigger a sample, it's leader _must_ be ACTIVE too.
Still, adding this check makes it consistent with the @sub case for
the siblings.
Reported-and-Tested-by: Mark Rutland <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5770,7 +5770,8 @@ static void perf_output_read_group(struc
if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
values[n++] = running;
- if (leader != event)
+ if ((leader != event) &&
+ (leader->state == PERF_EVENT_STATE_ACTIVE))
leader->pmu->read(leader);
values[n++] = perf_event_count(leader);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
[ Upstream commit 66231ad3e2886ba99fbf440cea44cab547e5163f ]
On ARM64, the default page size has been 64K on some distributions, and
we should allow ARM64 people to play null_blk.
This patch fixes the issue by extend page bitmap size for supporting
other non-4KB PAGE_SIZE.
Cc: Bart Van Assche <[email protected]>
Cc: Shaohua Li <[email protected]>
Cc: Kyungchan Koh <[email protected]>,
Cc: weiping zhang <[email protected]>
Cc: Yi Zhang <[email protected]>
Reported-by: Yi Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/null_blk.c | 46 +++++++++++++++++++++++++---------------------
1 file changed, 25 insertions(+), 21 deletions(-)
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -72,6 +72,7 @@ enum nullb_device_flags {
NULLB_DEV_FL_CACHE = 3,
};
+#define MAP_SZ ((PAGE_SIZE >> SECTOR_SHIFT) + 2)
/*
* nullb_page is a page in memory for nullb devices.
*
@@ -86,10 +87,10 @@ enum nullb_device_flags {
*/
struct nullb_page {
struct page *page;
- unsigned long bitmap;
+ DECLARE_BITMAP(bitmap, MAP_SZ);
};
-#define NULLB_PAGE_LOCK (sizeof(unsigned long) * 8 - 1)
-#define NULLB_PAGE_FREE (sizeof(unsigned long) * 8 - 2)
+#define NULLB_PAGE_LOCK (MAP_SZ - 1)
+#define NULLB_PAGE_FREE (MAP_SZ - 2)
struct nullb_device {
struct nullb *nullb;
@@ -728,7 +729,7 @@ static struct nullb_page *null_alloc_pag
if (!t_page->page)
goto out_freepage;
- t_page->bitmap = 0;
+ memset(t_page->bitmap, 0, sizeof(t_page->bitmap));
return t_page;
out_freepage:
kfree(t_page);
@@ -738,13 +739,20 @@ out:
static void null_free_page(struct nullb_page *t_page)
{
- __set_bit(NULLB_PAGE_FREE, &t_page->bitmap);
- if (test_bit(NULLB_PAGE_LOCK, &t_page->bitmap))
+ __set_bit(NULLB_PAGE_FREE, t_page->bitmap);
+ if (test_bit(NULLB_PAGE_LOCK, t_page->bitmap))
return;
__free_page(t_page->page);
kfree(t_page);
}
+static bool null_page_empty(struct nullb_page *page)
+{
+ int size = MAP_SZ - 2;
+
+ return find_first_bit(page->bitmap, size) == size;
+}
+
static void null_free_sector(struct nullb *nullb, sector_t sector,
bool is_cache)
{
@@ -759,9 +767,9 @@ static void null_free_sector(struct null
t_page = radix_tree_lookup(root, idx);
if (t_page) {
- __clear_bit(sector_bit, &t_page->bitmap);
+ __clear_bit(sector_bit, t_page->bitmap);
- if (!t_page->bitmap) {
+ if (null_page_empty(t_page)) {
ret = radix_tree_delete_item(root, idx, t_page);
WARN_ON(ret != t_page);
null_free_page(ret);
@@ -832,7 +840,7 @@ static struct nullb_page *__null_lookup_
t_page = radix_tree_lookup(root, idx);
WARN_ON(t_page && t_page->page->index != idx);
- if (t_page && (for_write || test_bit(sector_bit, &t_page->bitmap)))
+ if (t_page && (for_write || test_bit(sector_bit, t_page->bitmap)))
return t_page;
return NULL;
@@ -895,10 +903,10 @@ static int null_flush_cache_page(struct
t_page = null_insert_page(nullb, idx << PAGE_SECTORS_SHIFT, true);
- __clear_bit(NULLB_PAGE_LOCK, &c_page->bitmap);
- if (test_bit(NULLB_PAGE_FREE, &c_page->bitmap)) {
+ __clear_bit(NULLB_PAGE_LOCK, c_page->bitmap);
+ if (test_bit(NULLB_PAGE_FREE, c_page->bitmap)) {
null_free_page(c_page);
- if (t_page && t_page->bitmap == 0) {
+ if (t_page && null_page_empty(t_page)) {
ret = radix_tree_delete_item(&nullb->dev->data,
idx, t_page);
null_free_page(t_page);
@@ -914,11 +922,11 @@ static int null_flush_cache_page(struct
for (i = 0; i < PAGE_SECTORS;
i += (nullb->dev->blocksize >> SECTOR_SHIFT)) {
- if (test_bit(i, &c_page->bitmap)) {
+ if (test_bit(i, c_page->bitmap)) {
offset = (i << SECTOR_SHIFT);
memcpy(dst + offset, src + offset,
nullb->dev->blocksize);
- __set_bit(i, &t_page->bitmap);
+ __set_bit(i, t_page->bitmap);
}
}
@@ -955,10 +963,10 @@ again:
* We found the page which is being flushed to disk by other
* threads
*/
- if (test_bit(NULLB_PAGE_LOCK, &c_pages[i]->bitmap))
+ if (test_bit(NULLB_PAGE_LOCK, c_pages[i]->bitmap))
c_pages[i] = NULL;
else
- __set_bit(NULLB_PAGE_LOCK, &c_pages[i]->bitmap);
+ __set_bit(NULLB_PAGE_LOCK, c_pages[i]->bitmap);
}
one_round = 0;
@@ -1011,7 +1019,7 @@ static int copy_to_nullb(struct nullb *n
kunmap_atomic(dst);
kunmap_atomic(src);
- __set_bit(sector & SECTOR_MASK, &t_page->bitmap);
+ __set_bit(sector & SECTOR_MASK, t_page->bitmap);
if (is_fua)
null_free_sector(nullb, sector, true);
@@ -1802,10 +1810,6 @@ static int __init null_init(void)
struct nullb *nullb;
struct nullb_device *dev;
- /* check for nullb_page.bitmap */
- if (sizeof(unsigned long) * 8 - 2 < (PAGE_SIZE >> SECTOR_SHIFT))
- return -EINVAL;
-
if (g_bs > PAGE_SIZE) {
pr_warn("null_blk: invalid block size\n");
pr_warn("null_blk: defaults block size to %lu\n", PAGE_SIZE);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vivek Gautam <[email protected]>
[ Upstream commit f8ba22a39e985c93e278709b1d5f20857a26b49b ]
Pipe clock comes out of the phy and is available as long as
the phy is turned on. Clock controller fails to gate this
clock after the phy is turned off and generates a warning.
/ # [ 33.048561] gcc_usb3_phy_pipe_clk status stuck at 'on'
[ 33.048585] ------------[ cut here ]------------
[ 33.052621] WARNING: CPU: 1 PID: 18 at ../drivers/clk/qcom/clk-branch.c:97 clk_branch_wait+0xf0/0x108
[ 33.057384] Modules linked in:
[ 33.066497] CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G W 4.12.0-rc7-00024-gfe926e34c36d-dirty #96
[ 33.069451] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
...
[ 33.278565] [<ffff00000849b27c>] clk_branch_wait+0xf0/0x108
[ 33.286375] [<ffff00000849b2f4>] clk_branch2_disable+0x28/0x34
[ 33.291761] [<ffff0000084868dc>] clk_core_disable+0x5c/0x88
[ 33.297660] [<ffff000008487d68>] clk_core_disable_lock+0x20/0x34
[ 33.303129] [<ffff000008487d98>] clk_disable+0x1c/0x24
[ 33.309384] [<ffff0000083ccd78>] qcom_qmp_phy_poweroff+0x20/0x48
[ 33.314328] [<ffff0000083c53f4>] phy_power_off+0x80/0xdc
[ 33.320492] [<ffff00000875c950>] dwc3_core_exit+0x94/0xa0
[ 33.325784] [<ffff00000875c9ac>] dwc3_suspend_common+0x50/0x60
[ 33.331080] [<ffff00000875ca04>] dwc3_runtime_suspend+0x48/0x6c
[ 33.336810] [<ffff0000085b82f4>] pm_generic_runtime_suspend+0x28/0x38
[ 33.342627] [<ffff0000085bace0>] __rpm_callback+0x150/0x254
[ 33.349222] [<ffff0000085bae08>] rpm_callback+0x24/0x78
[ 33.354604] [<ffff0000085b9fd8>] rpm_suspend+0xe0/0x4e4
[ 33.359813] [<ffff0000085bb784>] pm_runtime_work+0xdc/0xf0
[ 33.365028] [<ffff0000080d7b30>] process_one_work+0x12c/0x28c
[ 33.370576] [<ffff0000080d7ce8>] worker_thread+0x58/0x3b8
[ 33.376393] [<ffff0000080dd4a8>] kthread+0x100/0x12c
[ 33.381776] [<ffff0000080836c0>] ret_from_fork+0x10/0x50
Fix this by disabling it as the first thing in phy_exit().
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Vivek Gautam <[email protected]>
Signed-off-by: Manu Gautam <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -751,8 +751,6 @@ static int qcom_qmp_phy_poweroff(struct
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
- clk_disable_unprepare(qphy->pipe_clk);
-
regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs);
return 0;
@@ -936,6 +934,8 @@ static int qcom_qmp_phy_exit(struct phy
const struct qmp_phy_cfg *cfg = qmp->cfg;
int i = cfg->num_clks;
+ clk_disable_unprepare(qphy->pipe_clk);
+
/* PHY reset */
qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Gorinov <[email protected]>
[ Upstream commit 0a5169add90e43ab45ab1ba34223b8583fcaf675 ]
IRQ parameters for the SoC devices connected directly to I/O APIC lines
(without PCI IRQ routing) may be specified in the Device Tree.
Called from DT IRQ parser, irq_create_fwspec_mapping() calls
irq_domain_alloc_irqs() with a pointer to irq_fwspec structure as @arg.
But x86-specific DT IRQ allocation code casts @arg to of_phandle_args
structure pointer and crashes trying to read the IRQ parameters. The
function was not converted when the mapping descriptor was changed to
irq_fwspec in the generic irqdomain code.
Fixes: 11e4438ee330 ("irqdomain: Introduce a firmware-specific IRQ specifier structure")
Signed-off-by: Ivan Gorinov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Rob Herring <[email protected]>
Link: https://lkml.kernel.org/r/a234dee27ea60ce76141872da0d6bdb378b2a9ee.1520450752.git.ivan.gorinov@intel.com
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/devicetree.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -195,19 +195,22 @@ static struct of_ioapic_type of_ioapic_t
static int dt_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *arg)
{
- struct of_phandle_args *irq_data = (void *)arg;
+ struct irq_fwspec *fwspec = (struct irq_fwspec *)arg;
struct of_ioapic_type *it;
struct irq_alloc_info tmp;
+ int type_index;
- if (WARN_ON(irq_data->args_count < 2))
+ if (WARN_ON(fwspec->param_count < 2))
return -EINVAL;
- if (irq_data->args[1] >= ARRAY_SIZE(of_ioapic_type))
+
+ type_index = fwspec->param[1];
+ if (type_index >= ARRAY_SIZE(of_ioapic_type))
return -EINVAL;
- it = &of_ioapic_type[irq_data->args[1]];
+ it = &of_ioapic_type[type_index];
ioapic_set_alloc_attr(&tmp, NUMA_NO_NODE, it->trigger, it->polarity);
tmp.ioapic_id = mpc_ioapic_id(mp_irqdomain_ioapic_idx(domain));
- tmp.ioapic_pin = irq_data->args[0];
+ tmp.ioapic_pin = fwspec->param[0];
return mp_irqdomain_alloc(domain, virq, nr_irqs, &tmp);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
[ Upstream commit 2e2c177ca84aff092c3c96714b0f6a12900f3946 ]
In slave_update() of vmaster code ignores the error from the slave
get() callback and copies the values. It's not only about the missing
error code but also that this may potentially lead to a leak of
uninitialized variables when the slave get() don't clear them.
This patch fixes slave_update() not to copy the potentially
uninitialized values when an error is returned from the slave get()
callback, and to propagate the error value properly.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/vmaster.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/sound/core/vmaster.c
+++ b/sound/core/vmaster.c
@@ -68,10 +68,13 @@ static int slave_update(struct link_slav
return -ENOMEM;
uctl->id = slave->slave.id;
err = slave->slave.get(&slave->slave, uctl);
+ if (err < 0)
+ goto error;
for (ch = 0; ch < slave->info.count; ch++)
slave->vals[ch] = uctl->value.integer.value[ch];
+ error:
kfree(uctl);
- return 0;
+ return err < 0 ? err : 0;
}
/* get the slave ctl info and save the initial values */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Monk Liu <[email protected]>
[ Upstream commit 9f0178fb67699992d38601cb923b434f9986dd68 ]
otherwise there will be DMAR reading error comes out from CP since
GFX is still alive and CPC's WPTR_POLL is still enabled, which would
lead to DMAR read error.
fix:
we can hault CPG after hw_fini, but cannot halt CPC becaues KIQ
stil need to be alive to let RLCV invoke, but its WPTR_POLL could
be disabled.
Signed-off-by: Monk Liu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2954,7 +2954,13 @@ static int gfx_v9_0_hw_fini(void *handle
gfx_v9_0_kcq_disable(&adev->gfx.kiq.ring, &adev->gfx.compute_ring[i]);
if (amdgpu_sriov_vf(adev)) {
- pr_debug("For SRIOV client, shouldn't do anything.\n");
+ gfx_v9_0_cp_gfx_enable(adev, false);
+ /* must disable polling for SRIOV when hw finished, otherwise
+ * CPC engine may still keep fetching WB address which is already
+ * invalid after sw finished and trigger DMAR reading error in
+ * hypervisor side.
+ */
+ WREG32_FIELD15(GC, 0, CP_PQ_WPTR_POLL_CNTL, EN, 0);
return 0;
}
gfx_v9_0_cp_enable(adev, false);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Gorinov <[email protected]>
[ Upstream commit 628df9dc5ad886b0a9b33c75a7b09710eb859ca1 ]
Commit 08d53aa58cb1 added CRC32 calculation in early_init_dt_verify() and
checking in late initcall of_fdt_raw_init(), making early_init_dt_verify()
mandatory.
The required call to early_init_dt_verify() was not added to the
x86-specific implementation, causing failure to create the sysfs entry in
of_fdt_raw_init().
Fixes: 08d53aa58cb1 ("of/fdt: export fdt blob as /sys/firmware/fdt")
Signed-off-by: Ivan Gorinov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Rob Herring <[email protected]>
Link: https://lkml.kernel.org/r/c8c7e941efc63b5d25ebf9b6350b0f3df38f6098.1520450752.git.ivan.gorinov@intel.com
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/devicetree.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -11,6 +11,7 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/of_irq.h>
+#include <linux/libfdt.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/of_pci.h>
@@ -270,14 +271,15 @@ static void __init x86_flattree_get_conf
map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK), (u64)128);
- initial_boot_params = dt = early_memremap(initial_dtb, map_len);
- size = of_get_flat_dt_size();
+ dt = early_memremap(initial_dtb, map_len);
+ size = fdt_totalsize(dt);
if (map_len < size) {
early_memunmap(dt, map_len);
- initial_boot_params = dt = early_memremap(initial_dtb, size);
+ dt = early_memremap(initial_dtb, size);
map_len = size;
}
+ early_init_dt_verify(dt);
unflatten_and_copy_device_tree();
early_memunmap(dt, map_len);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
[ Upstream commit 90c29ed7627b6b4aeb603ee197650173c8434512 ]
hdr.len includes both the size of the header and the fragment, so using
this when stepping through the firmware causes us to skip 16 bytes every
chunk of 3072 bytes; causing only the first fragment to actually be
valid data.
Instead use fragment size steps through the firmware blob.
Fixes: ea7a1f275cf0 ("soc: qcom: Introduce WCNSS_CTRL SMD client")
Reported-by: Will Newton <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soc/qcom/wcnss_ctrl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -249,7 +249,7 @@ static int wcnss_download_nv(struct wcns
/* Increment for next fragment */
req->seq++;
- data += req->hdr.len;
+ data += NV_FRAGMENT_SIZE;
left -= NV_FRAGMENT_SIZE;
} while (left > 0);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilia Lin <[email protected]>
[ Upstream commit e723795c702b52cfceb3bb3faa63059eb4658313 ]
Set correct clocks and interrupt values.
Fixes the incorrect SPI master configuration. This is
mandatory to make the SPI5 interface functional.
Signed-off-by: Ilia Lin <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -497,8 +497,8 @@
blsp2_spi5: spi@75ba000{
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x075ba000 0x600>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kan Liang <[email protected]>
[ Upstream commit f605cfca8c39ffa2b98c06d2b9f30ba64f1e54e3 ]
Large fixed period values could be truncated on Broadwell, for example:
perf record -e cycles -c 10000000000
Here the fixed period is 0x2540BE400, but the period which finally applied is
0x540BE400 - which is wrong.
The reason is that x86_pmu::limit_period() uses an u32 parameter, so the
high 32 bits of 'period' get truncated.
This bug was introduced in:
commit 294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
It's safe to use u64 instead of u32:
- Although the 'left' is s64, the value of 'left' must be positive when
calling limit_period().
- bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch
the higher 32 bits.
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Fixes: 294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
Link: http://lkml.kernel.org/r/[email protected]
[ Rewrote unacceptably bad changelog. ]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/intel/core.c | 2 +-
arch/x86/events/perf_event.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3196,7 +3196,7 @@ glp_get_event_constraints(struct cpu_hw_
* Therefore the effective (average) period matches the requested period,
* despite coarser hardware granularity.
*/
-static unsigned bdw_limit_period(struct perf_event *event, unsigned left)
+static u64 bdw_limit_period(struct perf_event *event, u64 left)
{
if ((event->hw.config & INTEL_ARCH_EVENT_MASK) ==
X86_CONFIG(.event=0xc0, .umask=0x01)) {
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -557,7 +557,7 @@ struct x86_pmu {
struct x86_pmu_quirk *quirks;
int perfctr_second_write;
bool late_ack;
- unsigned (*limit_period)(struct perf_event *event, unsigned l);
+ u64 (*limit_period)(struct perf_event *event, u64 l);
/*
* sysfs attrs
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yisheng Xie <[email protected]>
[ Upstream commit a3a4a3b37c9b911af4c375b2475cea0fd2b84d38 ]
When trying to add the "call-graph" variable for top into the
.perfconfig file, like:
[top]
call-graph = fp
I that perf_top_config() do not parse this variable.
Fix it by calling perf_default_config() when the top.call-graph variable
is set.
Signed-off-by: Yisheng Xie <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: b8cbb349061e ("perf config: Bring perf_default_config to the very beginning at main()")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/builtin-top.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -1224,8 +1224,10 @@ parse_callchain_opt(const struct option
static int perf_top_config(const char *var, const char *value, void *cb __maybe_unused)
{
- if (!strcmp(var, "top.call-graph"))
- var = "call-graph.record-mode"; /* fall-through */
+ if (!strcmp(var, "top.call-graph")) {
+ var = "call-graph.record-mode";
+ return perf_default_config(var, value, cb);
+ }
if (!strcmp(var, "top.children")) {
symbol_conf.cumulate_callchain = perf_config_bool(var, value);
return 0;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Icenowy Zheng <[email protected]>
[ Upstream commit 2e08e4d2ff488424919d69dd211ac860a019ac1d ]
The Allwinner H6 main CCU uses the internal oscillator of the SoC, which
is different with old SoCs' main CCU.
Add device tree binding for the Allwinner H6 main CCU.
Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 4 ++++
1 file changed, 4 insertions(+)
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -20,6 +20,7 @@ Required properties :
- "allwinner,sun50i-a64-ccu"
- "allwinner,sun50i-a64-r-ccu"
- "allwinner,sun50i-h5-ccu"
+ - "allwinner,sun50i-h6-ccu"
- "nextthing,gr8-ccu"
- reg: Must contain the registers base address and length
@@ -31,6 +32,9 @@ Required properties :
- #clock-cells : must contain 1
- #reset-cells : must contain 1
+For the main CCU on H6, one more clock is needed:
+- "iosc": the SoC's internal frequency oscillator
+
For the PRCM CCUs on A83T/H3/A64, two more clocks are needed:
- "pll-periph": the SoC's peripheral PLL from the main CCU
- "iosc": the SoC's internal frequency oscillator
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vaibhav Jain <[email protected]>
[ Upstream commit 94322ed8e857e3b2a33cf75118051af9baaa110f ]
PSL9D doesn't have a data-cache that needs to be flushed before
resetting the card. However when cxl tries to flush data-cache on such
a card, it times-out as PSL_Control register never indicates flush
operation complete due to missing data-cache. This is usually
indicated in the kernel logs with this message:
"WARNING: cache flush timed out"
To fix this the patch checks PSL_Debug register CDC-Field(BIT:27)
which indicates the absence of a data-cache and sets a flag
'no_data_cache' in 'struct cxl_native' to indicate this. When
cxl_data_cache_flush() is called it checks the flag and if set bails
out early without requesting a data-cache flush operation to the PSL.
Signed-off-by: Vaibhav Jain <[email protected]>
Acked-by: Andrew Donnellan <[email protected]>
Acked-by: Frederic Barrat <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/cxl/cxl.h | 4 ++++
drivers/misc/cxl/native.c | 11 ++++++++++-
drivers/misc/cxl/pci.c | 19 +++++++++++++------
3 files changed, 27 insertions(+), 7 deletions(-)
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -369,6 +369,9 @@ static const cxl_p2n_reg_t CXL_PSL_WED_A
#define CXL_PSL_TFC_An_AE (1ull << (63-30)) /* Restart PSL with address error */
#define CXL_PSL_TFC_An_R (1ull << (63-31)) /* Restart PSL transaction */
+/****** CXL_PSL_DEBUG *****************************************************/
+#define CXL_PSL_DEBUG_CDC (1ull << (63-27)) /* Coherent Data cache support */
+
/****** CXL_XSL9_IERAT_ERAT - CAIA 2 **********************************/
#define CXL_XSL9_IERAT_MLPID (1ull << (63-0)) /* Match LPID */
#define CXL_XSL9_IERAT_MPID (1ull << (63-1)) /* Match PID */
@@ -669,6 +672,7 @@ struct cxl_native {
irq_hw_number_t err_hwirq;
unsigned int err_virq;
u64 ps_off;
+ bool no_data_cache; /* set if no data cache on the card */
const struct cxl_service_layer_ops *sl_ops;
};
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -353,8 +353,17 @@ int cxl_data_cache_flush(struct cxl *ada
u64 reg;
unsigned long timeout = jiffies + (HZ * CXL_TIMEOUT);
- pr_devel("Flushing data cache\n");
+ /*
+ * Do a datacache flush only if datacache is available.
+ * In case of PSL9D datacache absent hence flush operation.
+ * would timeout.
+ */
+ if (adapter->native->no_data_cache) {
+ pr_devel("No PSL data cache. Ignoring cache flush req.\n");
+ return 0;
+ }
+ pr_devel("Flushing data cache\n");
reg = cxl_p1_read(adapter, CXL_PSL_Control);
reg |= CXL_PSL_Control_Fr;
cxl_p1_write(adapter, CXL_PSL_Control, reg);
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -456,6 +456,7 @@ static int init_implementation_adapter_r
u64 chipid;
u32 phb_index;
u64 capp_unit_id;
+ u64 psl_debug;
int rc;
rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
@@ -506,6 +507,16 @@ static int init_implementation_adapter_r
} else
cxl_p1_write(adapter, CXL_PSL9_DEBUG, 0x4000000000000000ULL);
+ /*
+ * Check if PSL has data-cache. We need to flush adapter datacache
+ * when as its about to be removed.
+ */
+ psl_debug = cxl_p1_read(adapter, CXL_PSL9_DEBUG);
+ if (psl_debug & CXL_PSL_DEBUG_CDC) {
+ dev_dbg(&dev->dev, "No data-cache present\n");
+ adapter->native->no_data_cache = true;
+ }
+
return 0;
}
@@ -1449,10 +1460,8 @@ int cxl_pci_reset(struct cxl *adapter)
/*
* The adapter is about to be reset, so ignore errors.
- * Not supported on P9 DD1
*/
- if ((cxl_is_power8()) || (!(cxl_is_power9_dd1())))
- cxl_data_cache_flush(adapter);
+ cxl_data_cache_flush(adapter);
/* pcie_warm_reset requests a fundamental pci reset which includes a
* PERST assert/deassert. PERST triggers a loading of the image
@@ -1936,10 +1945,8 @@ static void cxl_pci_remove_adapter(struc
/*
* Flush adapter datacache as its about to be removed.
- * Not supported on P9 DD1.
*/
- if ((cxl_is_power8()) || (!(cxl_is_power9_dd1())))
- cxl_data_cache_flush(adapter);
+ cxl_data_cache_flush(adapter);
cxl_deconfigure_adapter(adapter);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arjun Vynipadath <[email protected]>
[ Upstream commit d7cb44496a9bb458632cb3c18acb08949c210448 ]
Setting sge_uld_rxq_info to NULL in free_queues_uld().
We are referencing sge_uld_rxq_info in cxgb_up(). This
will fix a panic when interface is brought up after a
ULDq creation failure.
Fixes: 94cdb8bb993a (cxgb4: Add support for dynamic allocation
of resources for ULD)
Signed-off-by: Arjun Vynipadath <[email protected]>
Signed-off-by: Casey Leedom <[email protected]>
Signed-off-by: Ganesh Goudhar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
@@ -342,6 +342,7 @@ static void free_queues_uld(struct adapt
{
struct sge_uld_rxq_info *rxq_info = adap->sge.uld_rxq_info[uld_type];
+ adap->sge.uld_rxq_info[uld_type] = NULL;
kfree(rxq_info->rspq_id);
kfree(rxq_info->uldrxq);
kfree(rxq_info);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kan Liang <[email protected]>
[ Upstream commit d31fc13fdcb20e1c317f9a7dd6273c18fbd58308 ]
There is a bug when reading event->count with large PEBS enabled.
Here is an example:
# ./read_count
0x71f0
0x122c0
0x1000000001c54
0x100000001257d
0x200000000bdc5
In fixed period mode, the auto-reload mechanism could be enabled for
PEBS events, but the calculation of event->count does not take the
auto-reload values into account.
Anyone who reads event->count will get the wrong result, e.g x86_pmu_read().
This bug was introduced with the auto-reload mechanism enabled since
commit:
851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible")
Introduce intel_pmu_save_and_restart_reload() to calculate the
event->count only for auto-reload.
Since the counter increments a negative counter value and overflows on
the sign switch, giving the interval:
[-period, 0]
the difference between two consequtive reads is:
A) value2 - value1;
when no overflows have happened in between,
B) (0 - value1) + (value2 - (-period));
when one overflow happened in between,
C) (0 - value1) + (n - 1) * (period) + (value2 - (-period));
when @n overflows happened in between.
Here A) is the obvious difference, B) is the extension to the discrete
interval, where the first term is to the top of the interval and the
second term is from the bottom of the next interval and C) the extension
to multiple intervals, where the middle term is the whole intervals
covered.
The equation for all cases is:
value2 - value1 + n * period
Previously the event->count is updated right before the sample output.
But for case A, there is no PEBS record ready. It needs to be specially
handled.
Remove the auto-reload code from x86_perf_event_set_period() since
we'll not longer call that function in this case.
Based-on-code-from: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Fixes: 851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/core.c | 15 ++-----
arch/x86/events/intel/ds.c | 92 +++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 94 insertions(+), 13 deletions(-)
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -1162,16 +1162,13 @@ int x86_perf_event_set_period(struct per
per_cpu(pmc_prev_left[idx], smp_processor_id()) = left;
- if (!(hwc->flags & PERF_X86_EVENT_AUTO_RELOAD) ||
- local64_read(&hwc->prev_count) != (u64)-left) {
- /*
- * The hw event starts counting from this event offset,
- * mark it to be able to extra future deltas:
- */
- local64_set(&hwc->prev_count, (u64)-left);
+ /*
+ * The hw event starts counting from this event offset,
+ * mark it to be able to extra future deltas:
+ */
+ local64_set(&hwc->prev_count, (u64)-left);
- wrmsrl(hwc->event_base, (u64)(-left) & x86_pmu.cntval_mask);
- }
+ wrmsrl(hwc->event_base, (u64)(-left) & x86_pmu.cntval_mask);
/*
* Due to erratum on certan cpu we need
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -1315,17 +1315,84 @@ get_next_pebs_record_by_bit(void *base,
return NULL;
}
+/*
+ * Special variant of intel_pmu_save_and_restart() for auto-reload.
+ */
+static int
+intel_pmu_save_and_restart_reload(struct perf_event *event, int count)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ int shift = 64 - x86_pmu.cntval_bits;
+ u64 period = hwc->sample_period;
+ u64 prev_raw_count, new_raw_count;
+ s64 new, old;
+
+ WARN_ON(!period);
+
+ /*
+ * drain_pebs() only happens when the PMU is disabled.
+ */
+ WARN_ON(this_cpu_read(cpu_hw_events.enabled));
+
+ prev_raw_count = local64_read(&hwc->prev_count);
+ rdpmcl(hwc->event_base_rdpmc, new_raw_count);
+ local64_set(&hwc->prev_count, new_raw_count);
+
+ /*
+ * Since the counter increments a negative counter value and
+ * overflows on the sign switch, giving the interval:
+ *
+ * [-period, 0]
+ *
+ * the difference between two consequtive reads is:
+ *
+ * A) value2 - value1;
+ * when no overflows have happened in between,
+ *
+ * B) (0 - value1) + (value2 - (-period));
+ * when one overflow happened in between,
+ *
+ * C) (0 - value1) + (n - 1) * (period) + (value2 - (-period));
+ * when @n overflows happened in between.
+ *
+ * Here A) is the obvious difference, B) is the extension to the
+ * discrete interval, where the first term is to the top of the
+ * interval and the second term is from the bottom of the next
+ * interval and C) the extension to multiple intervals, where the
+ * middle term is the whole intervals covered.
+ *
+ * An equivalent of C, by reduction, is:
+ *
+ * value2 - value1 + n * period
+ */
+ new = ((s64)(new_raw_count << shift) >> shift);
+ old = ((s64)(prev_raw_count << shift) >> shift);
+ local64_add(new - old + count * period, &event->count);
+
+ perf_event_update_userpage(event);
+
+ return 0;
+}
+
static void __intel_pmu_pebs_event(struct perf_event *event,
struct pt_regs *iregs,
void *base, void *top,
int bit, int count)
{
+ struct hw_perf_event *hwc = &event->hw;
struct perf_sample_data data;
struct pt_regs regs;
void *at = get_next_pebs_record_by_bit(base, top, bit);
- if (!intel_pmu_save_and_restart(event) &&
- !(event->hw.flags & PERF_X86_EVENT_AUTO_RELOAD))
+ if (hwc->flags & PERF_X86_EVENT_AUTO_RELOAD) {
+ /*
+ * Now, auto-reload is only enabled in fixed period mode.
+ * The reload value is always hwc->sample_period.
+ * May need to change it, if auto-reload is enabled in
+ * freq mode later.
+ */
+ intel_pmu_save_and_restart_reload(event, count);
+ } else if (!intel_pmu_save_and_restart(event))
return;
while (count > 1) {
@@ -1377,8 +1444,11 @@ static void intel_pmu_drain_pebs_core(st
return;
n = top - at;
- if (n <= 0)
+ if (n <= 0) {
+ if (event->hw.flags & PERF_X86_EVENT_AUTO_RELOAD)
+ intel_pmu_save_and_restart_reload(event, 0);
return;
+ }
__intel_pmu_pebs_event(event, iregs, at, top, 0, n);
}
@@ -1401,8 +1471,22 @@ static void intel_pmu_drain_pebs_nhm(str
ds->pebs_index = ds->pebs_buffer_base;
- if (unlikely(base >= top))
+ if (unlikely(base >= top)) {
+ /*
+ * The drain_pebs() could be called twice in a short period
+ * for auto-reload event in pmu::read(). There are no
+ * overflows have happened in between.
+ * It needs to call intel_pmu_save_and_restart_reload() to
+ * update the event->count for this case.
+ */
+ for_each_set_bit(bit, (unsigned long *)&cpuc->pebs_enabled,
+ x86_pmu.max_pebs_events) {
+ event = cpuc->events[bit];
+ if (event->hw.flags & PERF_X86_EVENT_AUTO_RELOAD)
+ intel_pmu_save_and_restart_reload(event, 0);
+ }
return;
+ }
for (at = base; at < top; at += x86_pmu.pebs_record_size) {
struct pebs_record_nhm *p = at;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Coly Li <[email protected]>
[ Upstream commit 3fd47bfe55b00d5ac7b0a44c9301c07be39b1082 ]
struct delayed_work writeback_rate_update in struct cache_dev is a delayed
worker to call function update_writeback_rate() in period (the interval is
defined by dc->writeback_rate_update_seconds).
When a metadate I/O error happens on cache device, bcache error handling
routine bch_cache_set_error() will call bch_cache_set_unregister() to
retire whole cache set. On the unregister code path, this delayed work is
stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update).
dc->writeback_rate_update is a special delayed work from others in bcache.
In its routine update_writeback_rate(), this delayed work is re-armed
itself. That means when cancel_delayed_work_sync() returns, this delayed
work can still be executed after several seconds defined by
dc->writeback_rate_update_seconds.
The problem is, after cancel_delayed_work_sync() returns, the cache set
unregister code path will continue and release memory of struct cache set.
Then the delayed work is scheduled to run, __update_writeback_rate()
will reference the already released cache_set memory, and trigger a NULL
pointer deference fault.
This patch introduces two more bcache device flags,
- BCACHE_DEV_WB_RUNNING
bit set: bcache device is in writeback mode and running, it is OK for
dc->writeback_rate_update to re-arm itself.
bit clear:bcache device is trying to stop dc->writeback_rate_update,
this delayed work should not re-arm itself and quit.
- BCACHE_DEV_RATE_DW_RUNNING
bit set: routine update_writeback_rate() is executing.
bit clear: routine update_writeback_rate() quits.
This patch also adds a function cancel_writeback_rate_update_dwork() to
wait for dc->writeback_rate_update quits before cancel it by calling
cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected
quit dc->writeback_rate_update, after time_out seconds this function will
give up and continue to call cancel_delayed_work_sync().
And here I explain how this patch stops self re-armed delayed work properly
with the above stuffs.
update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning
and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling
cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING.
Before calling cancel_delayed_work_sync() wait utill flag
BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling
cancel_delayed_work_sync(), dc->writeback_rate_update must be already re-
armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases
delayed work routine update_writeback_rate() won't be executed after
cancel_delayed_work_sync() returns.
Inside update_writeback_rate() before calling schedule_delayed_work(), flag
BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means
someone is about to stop the delayed work. Because flag
BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync()
has to wait for this flag to be cleared, we don't need to worry about race
condition here.
If update_writeback_rate() is scheduled to run after checking
BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync()
in cancel_writeback_rate_update_dwork(), it is also safe. Because at this
moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned
previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear
and quit immediately.
Because there are more dependences inside update_writeback_rate() to struct
cache_set memory, dc->writeback_rate_update is not a simple self re-arm
delayed work. After trying many different methods (e.g. hold dc->count, or
use locks), this is the only way I can find which works to properly stop
dc->writeback_rate_update delayed work.
Changelog:
v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING
to bit index, for test_bit().
v2: Try to fix the race issue which is pointed out by Junhui.
v1: The initial version for review
Signed-off-by: Coly Li <[email protected]>
Reviewed-by: Junhui Tang <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Cc: Michael Lyle <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/bcache.h | 9 +++++----
drivers/md/bcache/super.c | 38 ++++++++++++++++++++++++++++++++++----
drivers/md/bcache/sysfs.c | 3 ++-
drivers/md/bcache/writeback.c | 29 ++++++++++++++++++++++++++++-
4 files changed, 69 insertions(+), 10 deletions(-)
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -258,10 +258,11 @@ struct bcache_device {
struct gendisk *disk;
unsigned long flags;
-#define BCACHE_DEV_CLOSING 0
-#define BCACHE_DEV_DETACHING 1
-#define BCACHE_DEV_UNLINK_DONE 2
-
+#define BCACHE_DEV_CLOSING 0
+#define BCACHE_DEV_DETACHING 1
+#define BCACHE_DEV_UNLINK_DONE 2
+#define BCACHE_DEV_WB_RUNNING 3
+#define BCACHE_DEV_RATE_DW_RUNNING 4
unsigned nr_stripes;
unsigned stripe_size;
atomic_t *stripe_sectors_dirty;
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -899,6 +899,31 @@ void bch_cached_dev_run(struct cached_de
pr_debug("error creating sysfs link");
}
+/*
+ * If BCACHE_DEV_RATE_DW_RUNNING is set, it means routine of the delayed
+ * work dc->writeback_rate_update is running. Wait until the routine
+ * quits (BCACHE_DEV_RATE_DW_RUNNING is clear), then continue to
+ * cancel it. If BCACHE_DEV_RATE_DW_RUNNING is not clear after time_out
+ * seconds, give up waiting here and continue to cancel it too.
+ */
+static void cancel_writeback_rate_update_dwork(struct cached_dev *dc)
+{
+ int time_out = WRITEBACK_RATE_UPDATE_SECS_MAX * HZ;
+
+ do {
+ if (!test_bit(BCACHE_DEV_RATE_DW_RUNNING,
+ &dc->disk.flags))
+ break;
+ time_out--;
+ schedule_timeout_interruptible(1);
+ } while (time_out > 0);
+
+ if (time_out == 0)
+ pr_warn("give up waiting for dc->writeback_write_update to quit");
+
+ cancel_delayed_work_sync(&dc->writeback_rate_update);
+}
+
static void cached_dev_detach_finish(struct work_struct *w)
{
struct cached_dev *dc = container_of(w, struct cached_dev, detach);
@@ -911,7 +936,9 @@ static void cached_dev_detach_finish(str
mutex_lock(&bch_register_lock);
- cancel_delayed_work_sync(&dc->writeback_rate_update);
+ if (test_and_clear_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags))
+ cancel_writeback_rate_update_dwork(dc);
+
if (!IS_ERR_OR_NULL(dc->writeback_thread)) {
kthread_stop(dc->writeback_thread);
dc->writeback_thread = NULL;
@@ -954,6 +981,7 @@ void bch_cached_dev_detach(struct cached
closure_get(&dc->disk.cl);
bch_writeback_queue(dc);
+
cached_dev_put(dc);
}
@@ -1092,14 +1120,16 @@ static void cached_dev_free(struct closu
{
struct cached_dev *dc = container_of(cl, struct cached_dev, disk.cl);
- cancel_delayed_work_sync(&dc->writeback_rate_update);
+ mutex_lock(&bch_register_lock);
+
+ if (test_and_clear_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags))
+ cancel_writeback_rate_update_dwork(dc);
+
if (!IS_ERR_OR_NULL(dc->writeback_thread))
kthread_stop(dc->writeback_thread);
if (dc->writeback_write_wq)
destroy_workqueue(dc->writeback_write_wq);
- mutex_lock(&bch_register_lock);
-
if (atomic_read(&dc->running))
bd_unlink_disk_holder(dc->bdev, dc->disk.disk);
bcache_device_free(&dc->disk);
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -309,7 +309,8 @@ STORE(bch_cached_dev)
bch_writeback_queue(dc);
if (attr == &sysfs_writeback_percent)
- schedule_delayed_work(&dc->writeback_rate_update,
+ if (!test_and_set_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags))
+ schedule_delayed_work(&dc->writeback_rate_update,
dc->writeback_rate_update_seconds * HZ);
mutex_unlock(&bch_register_lock);
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -115,6 +115,21 @@ static void update_writeback_rate(struct
struct cached_dev,
writeback_rate_update);
+ /*
+ * should check BCACHE_DEV_RATE_DW_RUNNING before calling
+ * cancel_delayed_work_sync().
+ */
+ set_bit(BCACHE_DEV_RATE_DW_RUNNING, &dc->disk.flags);
+ /* paired with where BCACHE_DEV_RATE_DW_RUNNING is tested */
+ smp_mb();
+
+ if (!test_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags)) {
+ clear_bit(BCACHE_DEV_RATE_DW_RUNNING, &dc->disk.flags);
+ /* paired with where BCACHE_DEV_RATE_DW_RUNNING is tested */
+ smp_mb();
+ return;
+ }
+
down_read(&dc->writeback_lock);
if (atomic_read(&dc->has_dirty) &&
@@ -123,8 +138,18 @@ static void update_writeback_rate(struct
up_read(&dc->writeback_lock);
- schedule_delayed_work(&dc->writeback_rate_update,
+ if (test_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags)) {
+ schedule_delayed_work(&dc->writeback_rate_update,
dc->writeback_rate_update_seconds * HZ);
+ }
+
+ /*
+ * should check BCACHE_DEV_RATE_DW_RUNNING before calling
+ * cancel_delayed_work_sync().
+ */
+ clear_bit(BCACHE_DEV_RATE_DW_RUNNING, &dc->disk.flags);
+ /* paired with where BCACHE_DEV_RATE_DW_RUNNING is tested */
+ smp_mb();
}
static unsigned writeback_delay(struct cached_dev *dc, unsigned sectors)
@@ -675,6 +700,7 @@ void bch_cached_dev_writeback_init(struc
dc->writeback_rate_p_term_inverse = 40;
dc->writeback_rate_i_term_inverse = 10000;
+ WARN_ON(test_and_clear_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags));
INIT_DELAYED_WORK(&dc->writeback_rate_update, update_writeback_rate);
}
@@ -693,6 +719,7 @@ int bch_cached_dev_writeback_start(struc
return PTR_ERR(dc->writeback_thread);
}
+ WARN_ON(test_and_set_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags));
schedule_delayed_work(&dc->writeback_rate_update,
dc->writeback_rate_update_seconds * HZ);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chao Yu <[email protected]>
[ Upstream commit 17cd07ae95073c298af92c1ba14ac58ce84de33b ]
As Jayashree Mohan reported:
A simple workload to reproduce this would be :
1. create foo
2. Write (8K - 16K) // foo size = 16K now
3. fsync()
4. falloc zero_range , keep_size (4202496 - 4210688) // foo size must be 16K
5. fdatasync()
Crash now
On recovery, we see that the file size is 4210688 and not 16K, which
violates the semantics of keep_size flag. We have a test case to
reproduce this using CrashMonkey on 4.15 kernel. Try this out by
simply running :
./c_harness -f /dev/sda -d /dev/cow_ram0 -t f2fs -e 102400 -P -v
tests/generic_468_zero.so
The root cause is that we miss to set KEEP_SIZE bit correctly in zero_range
when zeroing block cross EOF with FALLOC_FL_KEEP_SIZE, let's fix this
missing case.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/file.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1348,8 +1348,12 @@ static int f2fs_zero_range(struct inode
}
out:
- if (!(mode & FALLOC_FL_KEEP_SIZE) && i_size_read(inode) < new_size)
- f2fs_i_size_write(inode, new_size);
+ if (new_size > i_size_read(inode)) {
+ if (mode & FALLOC_FL_KEEP_SIZE)
+ file_set_keep_isize(inode);
+ else
+ f2fs_i_size_write(inode, new_size);
+ }
out_sem:
up_write(&F2FS_I(inode)->i_mmap_sem);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alistair Popple <[email protected]>
[ Upstream commit 2b74e2a9b39df40a2b489af2d24079617c61ee0e ]
When sending TLB invalidates to the NPU we need to send extra flushes due
to a hardware issue. The original implementation would lock the all the
ATSD MMIO registers sequentially before unlocking and relocking each of
them sequentially to do the extra flush.
This introduced a deadlock as it is possible for one thread to hold one
ATSD register whilst waiting for another register to be freed while the
other thread is holding that register waiting for the one in the first
thread to be freed.
For example if there are two threads and two ATSD registers:
Thread A Thread B
----------------------
Acquire 1
Acquire 2
Release 1 Acquire 1
Wait 1 Wait 2
Both threads will be stuck waiting to acquire a register resulting in an
RCU stall warning or soft lockup.
This patch solves the deadlock by refactoring the code to ensure registers
are not released between flushes and to ensure all registers are either
acquired or released together and in order.
Fixes: bbd5ff50afff ("powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD")
Signed-off-by: Alistair Popple <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/npu-dma.c | 227 +++++++++++++++++++------------
1 file changed, 140 insertions(+), 87 deletions(-)
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -417,6 +417,11 @@ struct npu_context {
void *priv;
};
+struct mmio_atsd_reg {
+ struct npu *npu;
+ int reg;
+};
+
/*
* Find a free MMIO ATSD register and mark it in use. Return -ENOSPC
* if none are available.
@@ -426,7 +431,7 @@ static int get_mmio_atsd_reg(struct npu
int i;
for (i = 0; i < npu->mmio_atsd_count; i++) {
- if (!test_and_set_bit(i, &npu->mmio_atsd_usage))
+ if (!test_and_set_bit_lock(i, &npu->mmio_atsd_usage))
return i;
}
@@ -435,86 +440,90 @@ static int get_mmio_atsd_reg(struct npu
static void put_mmio_atsd_reg(struct npu *npu, int reg)
{
- clear_bit(reg, &npu->mmio_atsd_usage);
+ clear_bit_unlock(reg, &npu->mmio_atsd_usage);
}
/* MMIO ATSD register offsets */
#define XTS_ATSD_AVA 1
#define XTS_ATSD_STAT 2
-static int mmio_launch_invalidate(struct npu *npu, unsigned long launch,
- unsigned long va)
+static void mmio_launch_invalidate(struct mmio_atsd_reg *mmio_atsd_reg,
+ unsigned long launch, unsigned long va)
{
- int mmio_atsd_reg;
-
- do {
- mmio_atsd_reg = get_mmio_atsd_reg(npu);
- cpu_relax();
- } while (mmio_atsd_reg < 0);
+ struct npu *npu = mmio_atsd_reg->npu;
+ int reg = mmio_atsd_reg->reg;
__raw_writeq(cpu_to_be64(va),
- npu->mmio_atsd_regs[mmio_atsd_reg] + XTS_ATSD_AVA);
+ npu->mmio_atsd_regs[reg] + XTS_ATSD_AVA);
eieio();
- __raw_writeq(cpu_to_be64(launch), npu->mmio_atsd_regs[mmio_atsd_reg]);
-
- return mmio_atsd_reg;
+ __raw_writeq(cpu_to_be64(launch), npu->mmio_atsd_regs[reg]);
}
-static int mmio_invalidate_pid(struct npu *npu, unsigned long pid, bool flush)
+static void mmio_invalidate_pid(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS],
+ unsigned long pid, bool flush)
{
+ int i;
unsigned long launch;
- /* IS set to invalidate matching PID */
- launch = PPC_BIT(12);
+ for (i = 0; i <= max_npu2_index; i++) {
+ if (mmio_atsd_reg[i].reg < 0)
+ continue;
+
+ /* IS set to invalidate matching PID */
+ launch = PPC_BIT(12);
- /* PRS set to process-scoped */
- launch |= PPC_BIT(13);
+ /* PRS set to process-scoped */
+ launch |= PPC_BIT(13);
- /* AP */
- launch |= (u64) mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
+ /* AP */
+ launch |= (u64)
+ mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
- /* PID */
- launch |= pid << PPC_BITLSHIFT(38);
+ /* PID */
+ launch |= pid << PPC_BITLSHIFT(38);
- /* No flush */
- launch |= !flush << PPC_BITLSHIFT(39);
+ /* No flush */
+ launch |= !flush << PPC_BITLSHIFT(39);
- /* Invalidating the entire process doesn't use a va */
- return mmio_launch_invalidate(npu, launch, 0);
+ /* Invalidating the entire process doesn't use a va */
+ mmio_launch_invalidate(&mmio_atsd_reg[i], launch, 0);
+ }
}
-static int mmio_invalidate_va(struct npu *npu, unsigned long va,
- unsigned long pid, bool flush)
+static void mmio_invalidate_va(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS],
+ unsigned long va, unsigned long pid, bool flush)
{
+ int i;
unsigned long launch;
- /* IS set to invalidate target VA */
- launch = 0;
+ for (i = 0; i <= max_npu2_index; i++) {
+ if (mmio_atsd_reg[i].reg < 0)
+ continue;
- /* PRS set to process scoped */
- launch |= PPC_BIT(13);
+ /* IS set to invalidate target VA */
+ launch = 0;
- /* AP */
- launch |= (u64) mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
+ /* PRS set to process scoped */
+ launch |= PPC_BIT(13);
- /* PID */
- launch |= pid << PPC_BITLSHIFT(38);
+ /* AP */
+ launch |= (u64)
+ mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
- /* No flush */
- launch |= !flush << PPC_BITLSHIFT(39);
+ /* PID */
+ launch |= pid << PPC_BITLSHIFT(38);
- return mmio_launch_invalidate(npu, launch, va);
+ /* No flush */
+ launch |= !flush << PPC_BITLSHIFT(39);
+
+ mmio_launch_invalidate(&mmio_atsd_reg[i], launch, va);
+ }
}
#define mn_to_npu_context(x) container_of(x, struct npu_context, mn)
-struct mmio_atsd_reg {
- struct npu *npu;
- int reg;
-};
-
static void mmio_invalidate_wait(
- struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS], bool flush)
+ struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
{
struct npu *npu;
int i, reg;
@@ -529,16 +538,67 @@ static void mmio_invalidate_wait(
reg = mmio_atsd_reg[i].reg;
while (__raw_readq(npu->mmio_atsd_regs[reg] + XTS_ATSD_STAT))
cpu_relax();
+ }
+}
+
+/*
+ * Acquires all the address translation shootdown (ATSD) registers required to
+ * launch an ATSD on all links this npu_context is active on.
+ */
+static void acquire_atsd_reg(struct npu_context *npu_context,
+ struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
+{
+ int i, j;
+ struct npu *npu;
+ struct pci_dev *npdev;
+ struct pnv_phb *nphb;
+
+ for (i = 0; i <= max_npu2_index; i++) {
+ mmio_atsd_reg[i].reg = -1;
+ for (j = 0; j < NV_MAX_LINKS; j++) {
+ /*
+ * There are no ordering requirements with respect to
+ * the setup of struct npu_context, but to ensure
+ * consistent behaviour we need to ensure npdev[][] is
+ * only read once.
+ */
+ npdev = READ_ONCE(npu_context->npdev[i][j]);
+ if (!npdev)
+ continue;
+
+ nphb = pci_bus_to_host(npdev->bus)->private_data;
+ npu = &nphb->npu;
+ mmio_atsd_reg[i].npu = npu;
+ mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
+ while (mmio_atsd_reg[i].reg < 0) {
+ mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
+ cpu_relax();
+ }
+ break;
+ }
+ }
+}
- put_mmio_atsd_reg(npu, reg);
+/*
+ * Release previously acquired ATSD registers. To avoid deadlocks the registers
+ * must be released in the same order they were acquired above in
+ * acquire_atsd_reg.
+ */
+static void release_atsd_reg(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
+{
+ int i;
+ for (i = 0; i <= max_npu2_index; i++) {
/*
- * The GPU requires two flush ATSDs to ensure all entries have
- * been flushed. We use PID 0 as it will never be used for a
- * process on the GPU.
+ * We can't rely on npu_context->npdev[][] being the same here
+ * as when acquire_atsd_reg() was called, hence we use the
+ * values stored in mmio_atsd_reg during the acquire phase
+ * rather than re-reading npdev[][].
*/
- if (flush)
- mmio_invalidate_pid(npu, 0, true);
+ if (mmio_atsd_reg[i].reg < 0)
+ continue;
+
+ put_mmio_atsd_reg(mmio_atsd_reg[i].npu, mmio_atsd_reg[i].reg);
}
}
@@ -549,10 +609,6 @@ static void mmio_invalidate_wait(
static void mmio_invalidate(struct npu_context *npu_context, int va,
unsigned long address, bool flush)
{
- int i, j;
- struct npu *npu;
- struct pnv_phb *nphb;
- struct pci_dev *npdev;
struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS];
unsigned long pid = npu_context->mm->context.id;
@@ -568,37 +624,25 @@ static void mmio_invalidate(struct npu_c
* Loop over all the NPUs this process is active on and launch
* an invalidate.
*/
- for (i = 0; i <= max_npu2_index; i++) {
- mmio_atsd_reg[i].reg = -1;
- for (j = 0; j < NV_MAX_LINKS; j++) {
- npdev = npu_context->npdev[i][j];
- if (!npdev)
- continue;
+ acquire_atsd_reg(npu_context, mmio_atsd_reg);
+ if (va)
+ mmio_invalidate_va(mmio_atsd_reg, address, pid, flush);
+ else
+ mmio_invalidate_pid(mmio_atsd_reg, pid, flush);
- nphb = pci_bus_to_host(npdev->bus)->private_data;
- npu = &nphb->npu;
- mmio_atsd_reg[i].npu = npu;
-
- if (va)
- mmio_atsd_reg[i].reg =
- mmio_invalidate_va(npu, address, pid,
- flush);
- else
- mmio_atsd_reg[i].reg =
- mmio_invalidate_pid(npu, pid, flush);
-
- /*
- * The NPU hardware forwards the shootdown to all GPUs
- * so we only have to launch one shootdown per NPU.
- */
- break;
- }
+ mmio_invalidate_wait(mmio_atsd_reg);
+ if (flush) {
+ /*
+ * The GPU requires two flush ATSDs to ensure all entries have
+ * been flushed. We use PID 0 as it will never be used for a
+ * process on the GPU.
+ */
+ mmio_invalidate_pid(mmio_atsd_reg, 0, true);
+ mmio_invalidate_wait(mmio_atsd_reg);
+ mmio_invalidate_pid(mmio_atsd_reg, 0, true);
+ mmio_invalidate_wait(mmio_atsd_reg);
}
-
- mmio_invalidate_wait(mmio_atsd_reg, flush);
- if (flush)
- /* Wait for the flush to complete */
- mmio_invalidate_wait(mmio_atsd_reg, false);
+ release_atsd_reg(mmio_atsd_reg);
}
static void pnv_npu2_mn_release(struct mmu_notifier *mn,
@@ -741,7 +785,16 @@ struct npu_context *pnv_npu2_init_contex
if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
&nvlink_index)))
return ERR_PTR(-ENODEV);
- npu_context->npdev[npu->index][nvlink_index] = npdev;
+
+ /*
+ * npdev is a pci_dev pointer setup by the PCI code. We assign it to
+ * npdev[][] to indicate to the mmu notifiers that an invalidation
+ * should also be sent over this nvlink. The notifiers don't use any
+ * other fields in npu_context, so we just need to ensure that when they
+ * deference npu_context->npdev[][] it is either a valid pointer or
+ * NULL.
+ */
+ WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], npdev);
if (!nphb->npu.nmmu_flush) {
/*
@@ -793,7 +846,7 @@ void pnv_npu2_destroy_context(struct npu
if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
&nvlink_index)))
return;
- npu_context->npdev[npu->index][nvlink_index] = NULL;
+ WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], NULL);
opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
PCI_DEVID(gpdev->bus->number, gpdev->devfn));
kref_put(&npu_context->kref, pnv_npu2_release_context);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bob Moore <[email protected]>
[ Upstream commit 1c29c372b2d1d2415601041532745ce859f24126 ]
Fixes a single-object memory leak on a store-to-reference method
invocation. ACPICA BZ 1439.
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpica/psargs.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -890,6 +890,10 @@ acpi_ps_get_next_arg(struct acpi_walk_st
ACPI_POSSIBLE_METHOD_CALL);
if (arg->common.aml_opcode == AML_INT_METHODCALL_OP) {
+
+ /* Free method call op and corresponding namestring sub-ob */
+
+ acpi_ps_free_op(arg->common.value.arg);
acpi_ps_free_op(arg);
arg = NULL;
walk_state->arg_count = 1;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Milton Miller <[email protected]>
[ Upstream commit d2fc8db691bf3197d43b2afb553311a9bf257bff ]
Assert RESET_SYSTEM bit for any reset and set MODE field from reset
type.
The watchdog control register has a RESET_SYSTEM bit that is really
closer to activate a reset, and RESET_SYSTEM_MODE field that chooses
how much to reset.
Before this patch, a node without these optional property would do a
SOC reset, but a node with properties requesting a cpu or SOC reset
would do nothing and a node requesting a system reset would do a
SOC reset.
Fixes: b7f0b8ad25f3 ("drivers/watchdog: ASPEED reference dev tree properties for config")
Signed-off-by: Milton Miller <[email protected]>
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/aspeed_wdt.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -234,11 +234,14 @@ static int aspeed_wdt_probe(struct platf
wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC | WDT_CTRL_RESET_SYSTEM;
} else {
if (!strcmp(reset_type, "cpu"))
- wdt->ctrl |= WDT_CTRL_RESET_MODE_ARM_CPU;
+ wdt->ctrl |= WDT_CTRL_RESET_MODE_ARM_CPU |
+ WDT_CTRL_RESET_SYSTEM;
else if (!strcmp(reset_type, "soc"))
- wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC;
+ wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC |
+ WDT_CTRL_RESET_SYSTEM;
else if (!strcmp(reset_type, "system"))
- wdt->ctrl |= WDT_CTRL_RESET_SYSTEM;
+ wdt->ctrl |= WDT_CTRL_RESET_MODE_FULL_CHIP |
+ WDT_CTRL_RESET_SYSTEM;
else if (strcmp(reset_type, "none"))
return -EINVAL;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kamlakant Patel <[email protected]>
[ Upstream commit f002612b9d86613bc6fde0a444e0095225f6053e ]
This happens when BMC doesn't return any data and the code is trying
to print the value of data[2].
Getting following crash:
[ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002
[ 484.736496] pgd = ffff0000094a2000
[ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000
[ 484.748158] Internal error: Oops: 96000005 [#1] SMP
[...]
[ 485.101451] Call trace:
[...]
[ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif]
[ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif]
[ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138
[ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30
[ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3)
Adding a check to validate the data len before printing data[2] to fix this issue.
Signed-off-by: Kamlakant Patel <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/ipmi/ipmi_ssif.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -761,7 +761,7 @@ static void msg_done_handler(struct ssif
ssif_info->ssif_state = SSIF_NORMAL;
ipmi_ssif_unlock_cond(ssif_info, flags);
pr_warn(PFX "Error getting flags: %d %d, %x\n",
- result, len, data[2]);
+ result, len, (len >= 3) ? data[2] : 0);
} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
|| data[1] != IPMI_GET_MSG_FLAGS_CMD) {
/*
@@ -783,7 +783,7 @@ static void msg_done_handler(struct ssif
if ((result < 0) || (len < 3) || (data[2] != 0)) {
/* Error clearing flags */
pr_warn(PFX "Error clearing flags: %d %d, %x\n",
- result, len, data[2]);
+ result, len, (len >= 3) ? data[2] : 0);
} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
|| data[1] != IPMI_CLEAR_MSG_FLAGS_CMD) {
pr_warn(PFX "Invalid response clearing flags: %x %x\n",
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Khoroshilov <[email protected]>
[ Upstream commit 3c578cd4bc52b6e65d65be1abad9a8aa489ec207 ]
If clk_prepare_enable(wdt->rtc_enable) fails,
wdt->enable clock is left enabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/sprd_wdt.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/watchdog/sprd_wdt.c
+++ b/drivers/watchdog/sprd_wdt.c
@@ -154,8 +154,10 @@ static int sprd_wdt_enable(struct sprd_w
if (ret)
return ret;
ret = clk_prepare_enable(wdt->rtc_enable);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(wdt->enable);
return ret;
+ }
sprd_wdt_unlock(wdt->base);
val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian Norris <[email protected]>
[ Upstream commit a81abbb412341e9e3b2d42ed7d310cf71fbb84a8 ]
RK3399 has rst_pulse_length in CONTROL_REG[4:2], determining the length
of pulse to issue for system reset. We shouldn't clobber this value,
because that might make the system reset ineffective. On RK3399, we're
seeing that a value of 000b (meaning 2 cycles) yields an unreliable
(partial?) reset, and so we only fully reset after the watchdog fires a
second time. If we retain the system default (010b, or 8 clock cycles),
then the watchdog reset is much more reliable.
Read-modify-write retains the system value and improves reset
reliability.
It seems we were intentionally clobbering the response mode previously,
to ensure we performed a system reset (we don't support an interrupt
notification), so retain that explicitly.
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/dw_wdt.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -34,6 +34,7 @@
#define WDOG_CONTROL_REG_OFFSET 0x00
#define WDOG_CONTROL_REG_WDT_EN_MASK 0x01
+#define WDOG_CONTROL_REG_RESP_MODE_MASK 0x02
#define WDOG_TIMEOUT_RANGE_REG_OFFSET 0x04
#define WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT 4
#define WDOG_CURRENT_COUNT_REG_OFFSET 0x08
@@ -121,14 +122,23 @@ static int dw_wdt_set_timeout(struct wat
return 0;
}
+static void dw_wdt_arm_system_reset(struct dw_wdt *dw_wdt)
+{
+ u32 val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+
+ /* Disable interrupt mode; always perform system reset. */
+ val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK;
+ /* Enable watchdog. */
+ val |= WDOG_CONTROL_REG_WDT_EN_MASK;
+ writel(val, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+}
+
static int dw_wdt_start(struct watchdog_device *wdd)
{
struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
dw_wdt_set_timeout(wdd, wdd->timeout);
-
- writel(WDOG_CONTROL_REG_WDT_EN_MASK,
- dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+ dw_wdt_arm_system_reset(dw_wdt);
return 0;
}
@@ -152,16 +162,13 @@ static int dw_wdt_restart(struct watchdo
unsigned long action, void *data)
{
struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
- u32 val;
writel(0, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
- val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
- if (val & WDOG_CONTROL_REG_WDT_EN_MASK)
+ if (dw_wdt_is_enabled(dw_wdt))
writel(WDOG_COUNTER_RESTART_KICK_VALUE,
dw_wdt->regs + WDOG_COUNTER_RESTART_REG_OFFSET);
else
- writel(WDOG_CONTROL_REG_WDT_EN_MASK,
- dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+ dw_wdt_arm_system_reset(dw_wdt);
/* wait for reset to assert... */
mdelay(500);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
[ Upstream commit 46706d5917f4457a6befe7a39a15c89dbb1ce9ca ]
Previously, we attempt to flush the whole cp pack in a single bio,
however, when suddenly powering off at this time, we could get into
an extreme scenario that cp pack 1 page and cp pack 2 page are updated
and latest, but payload or current summaries are still partially
outdated. (see reliable write in the UFS specification)
This patch submits the whole cp pack except cp pack 2 page at first,
and then writes the cp pack 2 page with an extra independent
bio with pre-io barrier.
Signed-off-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/checkpoint.c | 69 ++++++++++++++++++++++++++++++++++-----------------
1 file changed, 46 insertions(+), 23 deletions(-)
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -1162,6 +1162,39 @@ static void update_ckpt_flags(struct f2f
spin_unlock_irqrestore(&sbi->cp_lock, flags);
}
+static void commit_checkpoint(struct f2fs_sb_info *sbi,
+ void *src, block_t blk_addr)
+{
+ struct writeback_control wbc = {
+ .for_reclaim = 0,
+ };
+
+ /*
+ * pagevec_lookup_tag and lock_page again will take
+ * some extra time. Therefore, update_meta_pages and
+ * sync_meta_pages are combined in this function.
+ */
+ struct page *page = grab_meta_page(sbi, blk_addr);
+ int err;
+
+ memcpy(page_address(page), src, PAGE_SIZE);
+ set_page_dirty(page);
+
+ f2fs_wait_on_page_writeback(page, META, true);
+ f2fs_bug_on(sbi, PageWriteback(page));
+ if (unlikely(!clear_page_dirty_for_io(page)))
+ f2fs_bug_on(sbi, 1);
+
+ /* writeout cp pack 2 page */
+ err = __f2fs_write_meta_page(page, &wbc, FS_CP_META_IO);
+ f2fs_bug_on(sbi, err);
+
+ f2fs_put_page(page, 0);
+
+ /* submit checkpoint (with barrier if NOBARRIER is not set) */
+ f2fs_submit_merged_write(sbi, META_FLUSH);
+}
+
static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
{
struct f2fs_checkpoint *ckpt = F2FS_CKPT(sbi);
@@ -1264,16 +1297,6 @@ static int do_checkpoint(struct f2fs_sb_
}
}
- /* need to wait for end_io results */
- wait_on_all_pages_writeback(sbi);
- if (unlikely(f2fs_cp_error(sbi)))
- return -EIO;
-
- /* flush all device cache */
- err = f2fs_flush_device_cache(sbi);
- if (err)
- return err;
-
/* write out checkpoint buffer at block 0 */
update_meta_page(sbi, ckpt, start_blk++);
@@ -1301,26 +1324,26 @@ static int do_checkpoint(struct f2fs_sb_
start_blk += NR_CURSEG_NODE_TYPE;
}
- /* writeout checkpoint block */
- update_meta_page(sbi, ckpt, start_blk);
+ /* update user_block_counts */
+ sbi->last_valid_block_count = sbi->total_valid_block_count;
+ percpu_counter_set(&sbi->alloc_valid_block_count, 0);
- /* wait for previous submitted node/meta pages writeback */
+ /* Here, we have one bio having CP pack except cp pack 2 page */
+ sync_meta_pages(sbi, META, LONG_MAX, FS_CP_META_IO);
+
+ /* wait for previous submitted meta pages writeback */
wait_on_all_pages_writeback(sbi);
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
- filemap_fdatawait_range(NODE_MAPPING(sbi), 0, LLONG_MAX);
- filemap_fdatawait_range(META_MAPPING(sbi), 0, LLONG_MAX);
-
- /* update user_block_counts */
- sbi->last_valid_block_count = sbi->total_valid_block_count;
- percpu_counter_set(&sbi->alloc_valid_block_count, 0);
-
- /* Here, we only have one bio having CP pack */
- sync_meta_pages(sbi, META_FLUSH, LONG_MAX, FS_CP_META_IO);
+ /* flush all device cache */
+ err = f2fs_flush_device_cache(sbi);
+ if (err)
+ return err;
- /* wait for previous submitted meta pages writeback */
+ /* barrier and flush checkpoint cp pack 2 page if it can */
+ commit_checkpoint(sbi, ckpt, start_blk);
wait_on_all_pages_writeback(sbi);
release_ino_entry(sbi, false);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Schmauss <[email protected]>
[ Upstream commit b4c0de312613ca676db5bd7e696a44b56795612a ]
This ensures that acpi_ev_fixed_event_detect() does not use fixed_status
and and fixed_enable as uninitialized variables.
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpica/evevent.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/acpi/acpica/evevent.c
+++ b/drivers/acpi/acpica/evevent.c
@@ -204,6 +204,7 @@ u32 acpi_ev_fixed_event_detect(void)
u32 fixed_status;
u32 fixed_enable;
u32 i;
+ acpi_status status;
ACPI_FUNCTION_NAME(ev_fixed_event_detect);
@@ -211,8 +212,12 @@ u32 acpi_ev_fixed_event_detect(void)
* Read the fixed feature status and enable registers, as all the cases
* depend on their values. Ignore errors here.
*/
- (void)acpi_hw_register_read(ACPI_REGISTER_PM1_STATUS, &fixed_status);
- (void)acpi_hw_register_read(ACPI_REGISTER_PM1_ENABLE, &fixed_enable);
+ status = acpi_hw_register_read(ACPI_REGISTER_PM1_STATUS, &fixed_status);
+ status |=
+ acpi_hw_register_read(ACPI_REGISTER_PM1_ENABLE, &fixed_enable);
+ if (ACPI_FAILURE(status)) {
+ return (int_status);
+ }
ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
"Fixed Event Block: Enable %08X Status %08X\n",
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit e770f6bf18182bc3af6ceec30189b6c323cbc157 ]
'drm_vblank_init()' can fail. So handle this (unlikely) error.
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/6cbf3d70ac3904489c7194c895225c4103aebb96.1520885192.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -230,7 +230,10 @@ static int meson_drv_bind_master(struct
priv->vsync_irq = platform_get_irq(pdev, 0);
- drm_vblank_init(drm, 1);
+ ret = drm_vblank_init(drm, 1);
+ if (ret)
+ goto free_drm;
+
drm_mode_config_init(drm);
drm->mode_config.max_width = 3840;
drm->mode_config.max_height = 2160;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sukadev Bhattiprolu <[email protected]>
[ Upstream commit 45ddea8a73a25461387eb8e87f3e0ecca084799b ]
When VAS is not configured, unregister the platform driver. Also simplify
cleanup by delaying vas debugfs init until we know VAS is configured.
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/vas-debug.c | 11 +++++++++++
arch/powerpc/platforms/powernv/vas.c | 6 +++---
2 files changed, 14 insertions(+), 3 deletions(-)
--- a/arch/powerpc/platforms/powernv/vas-debug.c
+++ b/arch/powerpc/platforms/powernv/vas-debug.c
@@ -179,6 +179,7 @@ void vas_instance_init_dbgdir(struct vas
{
struct dentry *d;
+ vas_init_dbgdir();
if (!vas_debugfs)
return;
@@ -201,8 +202,18 @@ free_name:
vinst->dbgdir = NULL;
}
+/*
+ * Set up the "root" VAS debugfs dir. Return if we already set it up
+ * (or failed to) in an earlier instance of VAS.
+ */
void vas_init_dbgdir(void)
{
+ static bool first_time = true;
+
+ if (!first_time)
+ return;
+
+ first_time = false;
vas_debugfs = debugfs_create_dir("vas", NULL);
if (IS_ERR(vas_debugfs))
vas_debugfs = NULL;
--- a/arch/powerpc/platforms/powernv/vas.c
+++ b/arch/powerpc/platforms/powernv/vas.c
@@ -160,8 +160,6 @@ static int __init vas_init(void)
int found = 0;
struct device_node *dn;
- vas_init_dbgdir();
-
platform_driver_register(&vas_driver);
for_each_compatible_node(dn, NULL, "ibm,vas") {
@@ -169,8 +167,10 @@ static int __init vas_init(void)
found++;
}
- if (!found)
+ if (!found) {
+ platform_driver_unregister(&vas_driver);
return -ENODEV;
+ }
pr_devel("Found %d instances\n", found);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Kresin <[email protected]>
[ Upstream commit 05454c1bde91fb013c0431801001da82947e6b5a ]
According to the QCA u-boot source the "PCIE Phase Lock Loop
Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
QCA955X and QCA956X at offset 0x10.
Since the PCIE PLL config register is only defined for the AR724x fix
only this value. The value is wrong since the day it was added and isn't
used by any driver yet.
Signed-off-by: Mathias Kresin <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16048/
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -167,7 +167,7 @@
#define AR71XX_AHB_DIV_MASK 0x7
#define AR724X_PLL_REG_CPU_CONFIG 0x00
-#define AR724X_PLL_REG_PCIE_CONFIG 0x18
+#define AR724X_PLL_REG_PCIE_CONFIG 0x10
#define AR724X_PLL_FB_SHIFT 0
#define AR724X_PLL_FB_MASK 0x3ff
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Jaillet <[email protected]>
[ Upstream commit bc3cc75281b3c2b1c5355d88d147b66a753bb9a5 ]
For some reason, commit c0368e4db4a3 ("spi: bcm-qspi: Fix use after free
in bcm_qspi_probe() in error path") has updated some gotos, but not all of
them.
This looks spurious, so fix it.
Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm-qspi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1255,7 +1255,7 @@ int bcm_qspi_probe(struct platform_devic
qspi->base[MSPI] = devm_ioremap_resource(dev, res);
if (IS_ERR(qspi->base[MSPI])) {
ret = PTR_ERR(qspi->base[MSPI]);
- goto qspi_probe_err;
+ goto qspi_resource_err;
}
} else {
goto qspi_resource_err;
@@ -1266,7 +1266,7 @@ int bcm_qspi_probe(struct platform_devic
qspi->base[BSPI] = devm_ioremap_resource(dev, res);
if (IS_ERR(qspi->base[BSPI])) {
ret = PTR_ERR(qspi->base[BSPI]);
- goto qspi_probe_err;
+ goto qspi_resource_err;
}
qspi->bspi_mode = true;
} else {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Allen <[email protected]>
[ Upstream commit e676d81c8990f511d60698a1a8abaa438b3f9d3d ]
The case in which we handle a reset from the state where the device is
closed seems to be bugged for all types of reset. For most types of reset
we currently exit the reset routine correctly, but don't set the state to
indicate that we are back in the "closed" state. For some specific cases,
we don't exit the reset routine at all and resetting will cause a closed
device to be opened.
This patch fixes the problem by unconditionally checking the reset_state
and correctly setting the adapter state before returning.
Signed-off-by: John Allen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1699,12 +1699,14 @@ static int do_reset(struct ibmvnic_adapt
rc = reset_rx_pools(adapter);
if (rc)
return rc;
-
- if (reset_state == VNIC_CLOSED)
- return 0;
}
}
+ adapter->state = VNIC_CLOSED;
+
+ if (reset_state == VNIC_CLOSED)
+ return 0;
+
rc = __ibmvnic_open(netdev);
if (rc) {
if (list_empty(&adapter->rwi_list))
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rafael J. Wysocki" <[email protected]>
[ Upstream commit 5775b843a619b3c93f946e2b55a208d9f0f48b59 ]
We leave PCI devices not bound to a driver in D0 during runtime suspend.
But they may have a parent which is bound and can be transitioned to
D3cold at runtime. Once the parent goes to D3cold, the unbound child
may go to D3cold as well. When the child goes to D3cold, its internal
state, including configuration of BARs, MSI, ASPM, MPS, etc., is lost.
One example are recent hybrid graphics laptops which cut power to the
discrete GPU when the root port above it goes to ACPI power state D3.
Users may provoke this by unbinding the GPU driver and allowing runtime
PM on the GPU via sysfs: The PM core will then treat the GPU as
"suspended", which in turn allows the root port to runtime suspend,
causing the power resources listed in its _PR3 object to be powered off.
The GPU's BARs will be uninitialized when a driver later probes it.
Another example are hybrid graphics laptops where the GPU itself (rather
than the root port) is capable of runtime suspending to D3cold. If the
GPU's integrated HDA controller is not bound and the GPU's driver
decides to runtime suspend to D3cold, the HDA controller's BARs will be
uninitialized when a driver later probes it.
Fix by saving and restoring config space over a runtime suspend cycle
even if the device is not bound.
Acked-by: Bjorn Helgaas <[email protected]>
Tested-by: Peter Wu <[email protected]> # Nvidia Optimus
Tested-by: Lukas Wunner <[email protected]> # MacBook Pro
Signed-off-by: Rafael J. Wysocki <[email protected]>
[lukas: add commit message, bikeshed code comments for clarity]
Signed-off-by: Lukas Wunner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/92fb6e6ae2730915eb733c08e2f76c6a313e3860.1520068884.git.lukas@wunner.de
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-driver.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1225,11 +1225,14 @@ static int pci_pm_runtime_suspend(struct
int error;
/*
- * If pci_dev->driver is not set (unbound), the device should
- * always remain in D0 regardless of the runtime PM status
+ * If pci_dev->driver is not set (unbound), we leave the device in D0,
+ * but it may go to D3cold when the bridge above it runtime suspends.
+ * Save its config space in case that happens.
*/
- if (!pci_dev->driver)
+ if (!pci_dev->driver) {
+ pci_save_state(pci_dev);
return 0;
+ }
if (!pm || !pm->runtime_suspend)
return -ENOSYS;
@@ -1277,16 +1280,18 @@ static int pci_pm_runtime_resume(struct
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
/*
- * If pci_dev->driver is not set (unbound), the device should
- * always remain in D0 regardless of the runtime PM status
+ * Restoring config space is necessary even if the device is not bound
+ * to a driver because although we left it in D0, it may have gone to
+ * D3cold when the bridge above it runtime suspended.
*/
+ pci_restore_standard_config(pci_dev);
+
if (!pci_dev->driver)
return 0;
if (!pm || !pm->runtime_resume)
return -ENOSYS;
- pci_restore_standard_config(pci_dev);
pci_fixup_device(pci_fixup_resume_early, pci_dev);
pci_enable_wake(pci_dev, PCI_D0, false);
pci_fixup_device(pci_fixup_resume, pci_dev);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ursula Braun <[email protected]>
[ Upstream commit c9f4c6cf53bfafb639386a4c094929f13f573e04 ]
smc allocates a certain number of CQ entries for used RoCE devices. For
mlx5 devices the chosen constant number results in a large allocation
causing this warning:
[13355.124656] WARNING: CPU: 3 PID: 16535 at mm/page_alloc.c:3883 __alloc_pages_nodemask+0x2be/0x10c0
[13355.124657] Modules linked in: smc_diag(O) smc(O) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ip6table_filter ip6_tables iptable_filter mlx5_ib ib_core sunrpc mlx5_core s390_trng rng_core ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common ptp pps_core eadm_sch dm_multipath dm_mod vhost_net tun vhost tap sch_fq_codel kvm ip_tables x_tables autofs4 [last unloaded: smc]
[13355.124672] CPU: 3 PID: 16535 Comm: kworker/3:0 Tainted: G O 4.14.0uschi #1
[13355.124673] Hardware name: IBM 3906 M04 704 (LPAR)
[13355.124675] Workqueue: events smc_listen_work [smc]
[13355.124677] task: 00000000e2f22100 task.stack: 0000000084720000
[13355.124678] Krnl PSW : 0704c00180000000 000000000029da76 (__alloc_pages_nodemask+0x2be/0x10c0)
[13355.124681] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
[13355.124682] Krnl GPRS: 0000000000000000 00550e00014080c0 0000000000000000 0000000000000001
[13355.124684] 000000000029d8b6 00000000f3bfd710 0000000000000000 00000000014080c0
[13355.124685] 0000000000000009 00000000ec277a00 0000000000200000 0000000000000000
[13355.124686] 0000000000000000 00000000000001ff 000000000029d8b6 0000000084723720
[13355.124708] Krnl Code: 000000000029da6a: a7110200 tmll %r1,512
000000000029da6e: a774ff29 brc 7,29d8c0
#000000000029da72: a7f40001 brc 15,29da74
>000000000029da76: a7f4ff25 brc 15,29d8c0
000000000029da7a: a7380000 lhi %r3,0
000000000029da7e: a7f4fef1 brc 15,29d860
000000000029da82: 5820f0c4 l %r2,196(%r15)
000000000029da86: a53e0048 llilh %r3,72
[13355.124720] Call Trace:
[13355.124722] ([<000000000029d8b6>] __alloc_pages_nodemask+0xfe/0x10c0)
[13355.124724] [<000000000013bd1e>] s390_dma_alloc+0x6e/0x148
[13355.124733] [<000003ff802eeba6>] mlx5_dma_zalloc_coherent_node+0x8e/0xe0 [mlx5_core]
[13355.124740] [<000003ff802eee18>] mlx5_buf_alloc_node+0x70/0x108 [mlx5_core]
[13355.124744] [<000003ff804eb410>] mlx5_ib_create_cq+0x558/0x898 [mlx5_ib]
[13355.124749] [<000003ff80407d40>] ib_create_cq+0x48/0x88 [ib_core]
[13355.124751] [<000003ff80109fba>] smc_ib_setup_per_ibdev+0x52/0x118 [smc]
[13355.124753] [<000003ff8010bcb6>] smc_conn_create+0x65e/0x728 [smc]
[13355.124755] [<000003ff801081a2>] smc_listen_work+0x2d2/0x540 [smc]
[13355.124756] [<0000000000162c66>] process_one_work+0x1be/0x440
[13355.124758] [<0000000000162f40>] worker_thread+0x58/0x458
[13355.124759] [<0000000000169e7e>] kthread+0x14e/0x168
[13355.124760] [<00000000009ce8be>] kernel_thread_starter+0x6/0xc
[13355.124762] [<00000000009ce8b8>] kernel_thread_starter+0x0/0xc
[13355.124762] Last Breaking-Event-Address:
[13355.124764] [<000000000029da72>] __alloc_pages_nodemask+0x2ba/0x10c0
[13355.124764] ---[ end trace 34be38b581c0b585 ]---
This patch reduces the smc constant for the maximum number of allocated
completion queue entries SMC_MAX_CQE by 2 to avoid high round up values
in the mlx5 code, and reduces the number of allocated completion queue
entries even more, if the final allocation for an mlx5 device hits the
MAX_ORDER limit.
Reported-by: Ihnken Menssen <[email protected]>
Signed-off-by: Ursula Braun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_ib.c | 10 +++++++++-
net/smc/smc_wr.h | 1 -
2 files changed, 9 insertions(+), 2 deletions(-)
--- a/net/smc/smc_ib.c
+++ b/net/smc/smc_ib.c
@@ -23,6 +23,8 @@
#include "smc_wr.h"
#include "smc.h"
+#define SMC_MAX_CQE 32766 /* max. # of completion queue elements */
+
#define SMC_QP_MIN_RNR_TIMER 5
#define SMC_QP_TIMEOUT 15 /* 4096 * 2 ** timeout usec */
#define SMC_QP_RETRY_CNT 7 /* 7: infinite */
@@ -438,9 +440,15 @@ out:
long smc_ib_setup_per_ibdev(struct smc_ib_device *smcibdev)
{
struct ib_cq_init_attr cqattr = {
- .cqe = SMC_WR_MAX_CQE, .comp_vector = 0 };
+ .cqe = SMC_MAX_CQE, .comp_vector = 0 };
+ int cqe_size_order, smc_order;
long rc;
+ /* the calculated number of cq entries fits to mlx5 cq allocation */
+ cqe_size_order = cache_line_size() == 128 ? 7 : 6;
+ smc_order = MAX_ORDER - cqe_size_order - 1;
+ if (SMC_MAX_CQE + 2 > (0x00000001 << smc_order) * PAGE_SIZE)
+ cqattr.cqe = (0x00000001 << smc_order) * PAGE_SIZE - 2;
smcibdev->roce_cq_send = ib_create_cq(smcibdev->ibdev,
smc_wr_tx_cq_handler, NULL,
smcibdev, &cqattr);
--- a/net/smc/smc_wr.h
+++ b/net/smc/smc_wr.h
@@ -19,7 +19,6 @@
#include "smc.h"
#include "smc_core.h"
-#define SMC_WR_MAX_CQE 32768 /* max. # of completion queue elements */
#define SMC_WR_BUF_CNT 16 /* # of ctrl buffers per link */
#define SMC_WR_TX_WAIT_FREE_SLOT_TIME (10 * HZ)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chao Yu <[email protected]>
[ Upstream commit cd36d7a17f9da68be9aa67185ba3ad7969934a19 ]
Once CP_TRIMMED_FLAG is set, after a reboot, we will never issue discard
before LBA becomes invalid again, fix it by clearing the flag in
checkpoint without CP_TRIMMED reason.
Fixes: 1f43e2ad7bff ("f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/checkpoint.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -1136,6 +1136,8 @@ static void update_ckpt_flags(struct f2f
if (cpc->reason & CP_TRIMMED)
__set_ckpt_flags(ckpt, CP_TRIMMED_FLAG);
+ else
+ __clear_ckpt_flags(ckpt, CP_TRIMMED_FLAG);
if (cpc->reason & CP_UMOUNT)
__set_ckpt_flags(ckpt, CP_UMOUNT_FLAG);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Jaillet <[email protected]>
[ Upstream commit ed8cffda27dea6fd3dafb3ee881c5a786edac9ca ]
Re-order error handling code and gotos to avoid leaks in error handling
paths.
Fixes: 9f946099fe19 ("regulator: gpio: fix parsing of gpio list")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/gpio-regulator.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -271,8 +271,7 @@ static int gpio_regulator_probe(struct p
drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
if (drvdata->desc.name == NULL) {
dev_err(&pdev->dev, "Failed to allocate supply name\n");
- ret = -ENOMEM;
- goto err;
+ return -ENOMEM;
}
if (config->nr_gpios != 0) {
@@ -292,7 +291,7 @@ static int gpio_regulator_probe(struct p
dev_err(&pdev->dev,
"Could not obtain regulator setting GPIOs: %d\n",
ret);
- goto err_memstate;
+ goto err_memgpio;
}
}
@@ -303,7 +302,7 @@ static int gpio_regulator_probe(struct p
if (drvdata->states == NULL) {
dev_err(&pdev->dev, "Failed to allocate state data\n");
ret = -ENOMEM;
- goto err_memgpio;
+ goto err_stategpio;
}
drvdata->nr_states = config->nr_states;
@@ -324,7 +323,7 @@ static int gpio_regulator_probe(struct p
default:
dev_err(&pdev->dev, "No regulator type set\n");
ret = -EINVAL;
- goto err_memgpio;
+ goto err_memstate;
}
/* build initial state from gpio init data. */
@@ -361,22 +360,21 @@ static int gpio_regulator_probe(struct p
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
- goto err_stategpio;
+ goto err_memstate;
}
platform_set_drvdata(pdev, drvdata);
return 0;
-err_stategpio:
- gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
err_memstate:
kfree(drvdata->states);
+err_stategpio:
+ gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
err_memgpio:
kfree(drvdata->gpios);
err_name:
kfree(drvdata->desc.name);
-err:
return ret;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leo Yan <[email protected]>
[ Upstream commit 831c326fcd0e8e2a6ece952f898a1ec9b1dc1004 ]
Commit ad67b74d2469 ("printk: hash addresses printed with %p") lets
printk specifier %p to hash all addresses before printing, this was
resulting in the high 32 bits of pcsr can only output zeros. So
module cannot completely print pc value and it's pointless for debugging
purpose.
This patch fixes this by using %px to print pcsr instead.
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/coresight/coresight-cpu-debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hwtracing/coresight/coresight-cpu-debug.c
+++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c
@@ -315,7 +315,7 @@ static void debug_dump_regs(struct debug
}
pc = debug_adjust_pc(drvdata);
- dev_emerg(dev, " EDPCSR: [<%p>] %pS\n", (void *)pc, (void *)pc);
+ dev_emerg(dev, " EDPCSR: [<%px>] %pS\n", (void *)pc, (void *)pc);
if (drvdata->edcidsr_present)
dev_emerg(dev, " EDCIDSR: %08x\n", drvdata->edcidsr);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Richter <[email protected]>
[ Upstream commit fca32340a5e8b896f57d41fd94b8b1701df25eb1 ]
Executing command 'perf stat -T -- ls' dumps core on x86 and s390.
Here is the call back chain (done on x86):
# gdb ./perf
....
(gdb) r stat -T -- ls
...
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6
(gdb) where
#0 0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6
#1 0x00007ffff56ae484 in asprintf () from /lib64/libc.so.6
#2 0x00000000004f1982 in __parse_events_add_pmu (parse_state=0x7fffffffd580,
list=0xbfb970, name=0xbf3ef0 "cpu",
head_config=0xbfb930, auto_merge_stats=false) at util/parse-events.c:1233
#3 0x00000000004f1c8e in parse_events_add_pmu (parse_state=0x7fffffffd580,
list=0xbfb970, name=0xbf3ef0 "cpu",
head_config=0xbfb930) at util/parse-events.c:1288
#4 0x0000000000537ce3 in parse_events_parse (_parse_state=0x7fffffffd580,
scanner=0xbf4210) at util/parse-events.y:234
#5 0x00000000004f2c7a in parse_events__scanner (str=0x6b66c0
"task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}",
parse_state=0x7fffffffd580, start_token=258) at util/parse-events.c:1673
#6 0x00000000004f2e23 in parse_events (evlist=0xbe9990, str=0x6b66c0
"task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}", err=0x0)
at util/parse-events.c:1713
#7 0x000000000044e137 in add_default_attributes () at builtin-stat.c:2281
#8 0x000000000044f7b5 in cmd_stat (argc=1, argv=0x7fffffffe3b0) at
builtin-stat.c:2828
#9 0x00000000004c8b0f in run_builtin (p=0xab01a0 <commands+288>, argc=4,
argv=0x7fffffffe3b0) at perf.c:297
#10 0x00000000004c8d7c in handle_internal_command (argc=4,
argv=0x7fffffffe3b0) at perf.c:349
#11 0x00000000004c8ece in run_argv (argcp=0x7fffffffe20c,
argv=0x7fffffffe200) at perf.c:393
#12 0x00000000004c929c in main (argc=4, argv=0x7fffffffe3b0) at perf.c:537
(gdb)
It turns out that a NULL pointer is referenced. Here are the
function calls:
...
cmd_stat()
+---> add_default_attributes()
+---> parse_events(evsel_list, transaction_attrs, NULL);
3rd parameter set to NULL
Function parse_events(xx, xx, struct parse_events_error *err) dives
into a bison generated scanner and creates
parser state information for it first:
struct parse_events_state parse_state = {
.list = LIST_HEAD_INIT(parse_state.list),
.idx = evlist->nr_entries,
.error = err, <--- NULL POINTER !!!
.evlist = evlist,
};
Now various functions inside the bison scanner are called to end up in
__parse_events_add_pmu(struct parse_events_state *parse_state, ..) with
first parameter being a pointer to above structure definition.
Now the PMU event name is not found (because being executed in a VM) and
this function tries to create an error message with
asprintf(&parse_state->error.str, ....)
which references a NULL pointer and dumps core.
Fix this by providing a pointer to the necessary error information
instead of NULL. Technically only the else part is needed to avoid the
core dump, just lets be safe...
Signed-off-by: Thomas Richter <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/builtin-stat.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -2274,11 +2274,16 @@ static int add_default_attributes(void)
return 0;
if (transaction_run) {
+ struct parse_events_error errinfo;
+
if (pmu_have_event("cpu", "cycles-ct") &&
pmu_have_event("cpu", "el-start"))
- err = parse_events(evsel_list, transaction_attrs, NULL);
+ err = parse_events(evsel_list, transaction_attrs,
+ &errinfo);
else
- err = parse_events(evsel_list, transaction_limited_attrs, NULL);
+ err = parse_events(evsel_list,
+ transaction_limited_attrs,
+ &errinfo);
if (err) {
fprintf(stderr, "Cannot set up transaction events\n");
return -1;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oded Gabbay <[email protected]>
[ Upstream commit 7420f482ea5163bf6dae39a5c7628d5397cd6307 ]
This patch fixes kernel build in ARCH=frv
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
@@ -26,6 +26,7 @@
#define AMDGPU_AMDKFD_H_INCLUDED
#include <linux/types.h>
+#include <linux/mm.h>
#include <linux/mmu_context.h>
#include <kgd_kfd_interface.h>
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacob Keller <[email protected]>
[ Upstream commit f0ee70a042e267a517e943220e18ae62d3c1995a ]
When we suspend and resume, we need to clear and re-enable the interrupt
scheme. This was previously not done while holding the RTNL lock, which
could be problematic, because we are actually destroying and re-creating
queues.
Hold the RTNL lock for the entire sequence of preparing for reset, and
when resuming. This additionally protects the flags related to interrupt
scheme under RTNL lock so that their modification is properly threaded.
This is part of a larger effort to remove the need for cmpxchg64 in
i40e_set_priv_flags().
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14216,7 +14216,13 @@ static int __maybe_unused i40e_suspend(s
if (pf->wol_en && (pf->hw_features & I40E_HW_WOL_MC_MAGIC_PKT_WAKE))
i40e_enable_mc_magic_wake(pf);
- i40e_prep_for_reset(pf, false);
+ /* Since we're going to destroy queues during the
+ * i40e_clear_interrupt_scheme() we should hold the RTNL lock for this
+ * whole section
+ */
+ rtnl_lock();
+
+ i40e_prep_for_reset(pf, true);
wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
@@ -14228,6 +14234,8 @@ static int __maybe_unused i40e_suspend(s
*/
i40e_clear_interrupt_scheme(pf);
+ rtnl_unlock();
+
return 0;
}
@@ -14245,6 +14253,11 @@ static int __maybe_unused i40e_resume(st
if (!test_bit(__I40E_SUSPENDED, pf->state))
return 0;
+ /* We need to hold the RTNL lock prior to restoring interrupt schemes,
+ * since we're going to be restoring queues
+ */
+ rtnl_lock();
+
/* We cleared the interrupt scheme when we suspended, so we need to
* restore it now to resume device functionality.
*/
@@ -14255,7 +14268,9 @@ static int __maybe_unused i40e_resume(st
}
clear_bit(__I40E_DOWN, pf->state);
- i40e_reset_and_rebuild(pf, false, false);
+ i40e_reset_and_rebuild(pf, false, true);
+
+ rtnl_unlock();
/* Clear suspended state last after everything is recovered */
clear_bit(__I40E_SUSPENDED, pf->state);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Coly Li <[email protected]>
[ Upstream commit 804f3c6981f5e4a506a8f14dc284cb218d0659ae ]
When bcache metadata I/O fails, bcache will call bch_cache_set_error()
to retire the whole cache set. The expected behavior to retire a cache
set is to unregister the cache set, and unregister all backing device
attached to this cache set, then remove sysfs entries of the cache set
and all attached backing devices, finally release memory of structs
cache_set, cache, cached_dev and bcache_device.
In my testing when journal I/O failure triggered by disconnected cache
device, sometimes the cache set cannot be retired, and its sysfs
entry /sys/fs/bcache/<uuid> still exits and the backing device also
references it. This is not expected behavior.
When metadata I/O failes, the call senquence to retire whole cache set is,
bch_cache_set_error()
bch_cache_set_unregister()
bch_cache_set_stop()
__cache_set_unregister() <- called as callback by calling
clousre_queue(&c->caching)
cache_set_flush() <- called as a callback when refcount
of cache_set->caching is 0
cache_set_free() <- called as a callback when refcount
of catch_set->cl is 0
bch_cache_set_release() <- called as a callback when refcount
of catch_set->kobj is 0
I find if kernel thread bch_writeback_thread() quits while-loop when
kthread_should_stop() is true and searched_full_index is false, clousre
callback cache_set_flush() set by continue_at() will never be called. The
result is, bcache fails to retire whole cache set.
cache_set_flush() will be called when refcount of closure c->caching is 0,
and in function bcache_device_detach() refcount of closure c->caching is
released to 0 by clousre_put(). In metadata error code path, function
bcache_device_detach() is called by cached_dev_detach_finish(). This is a
callback routine being called when cached_dev->count is 0. This refcount
is decreased by cached_dev_put().
The above dependence indicates, cache_set_flush() will be called when
refcount of cache_set->cl is 0, and refcount of cache_set->cl to be 0
when refcount of cache_dev->count is 0.
The reason why sometimes cache_dev->count is not 0 (when metadata I/O fails
and bch_cache_set_error() called) is, in bch_writeback_thread(), refcount
of cache_dev is not decreased properly.
In bch_writeback_thread(), cached_dev_put() is called only when
searched_full_index is true and cached_dev->writeback_keys is empty, a.k.a
there is no dirty data on cache. In most of run time it is correct, but
when bch_writeback_thread() quits the while-loop while cache is still
dirty, current code forget to call cached_dev_put() before this kernel
thread exits. This is why sometimes cache_set_flush() is not executed and
cache set fails to be retired.
The reason to call cached_dev_put() in bch_writeback_rate() is, when the
cache device changes from clean to dirty, cached_dev_get() is called, to
make sure during writeback operatiions both backing and cache devices
won't be released.
Adding following code in bch_writeback_thread() does not work,
static int bch_writeback_thread(void *arg)
}
+ if (atomic_read(&dc->has_dirty))
+ cached_dev_put()
+
return 0;
}
because writeback kernel thread can be waken up and start via sysfs entry:
echo 1 > /sys/block/bcache<N>/bcache/writeback_running
It is difficult to check whether backing device is dirty without race and
extra lock. So the above modification will introduce potential refcount
underflow in some conditions.
The correct fix is, to take cached dev refcount when creating the kernel
thread, and put it before the kernel thread exits. Then bcache does not
need to take a cached dev refcount when cache turns from clean to dirty,
or to put a cached dev refcount when cache turns from ditry to clean. The
writeback kernel thread is alwasy safe to reference data structure from
cache set, cache and cached device (because a refcount of cache device is
taken for it already), and no matter the kernel thread is stopped by I/O
errors or system reboot, cached_dev->count can always be used correctly.
The patch is simple, but understanding how it works is quite complicated.
Changelog:
v2: set dc->writeback_thread to NULL in this patch, as suggested by Hannes.
v1: initial version for review.
Signed-off-by: Coly Li <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Cc: Michael Lyle <[email protected]>
Cc: Junhui Tang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/super.c | 1 -
drivers/md/bcache/writeback.c | 11 ++++++++---
drivers/md/bcache/writeback.h | 2 --
3 files changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1065,7 +1065,6 @@ int bch_cached_dev_attach(struct cached_
if (BDEV_STATE(&dc->sb) == BDEV_STATE_DIRTY) {
bch_sectors_dirty_init(&dc->disk);
atomic_set(&dc->has_dirty, 1);
- refcount_inc(&dc->count);
bch_writeback_queue(dc);
}
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -578,7 +578,7 @@ static int bch_writeback_thread(void *ar
if (kthread_should_stop()) {
set_current_state(TASK_RUNNING);
- return 0;
+ break;
}
schedule();
@@ -591,7 +591,6 @@ static int bch_writeback_thread(void *ar
if (searched_full_index &&
RB_EMPTY_ROOT(&dc->writeback_keys.keys)) {
atomic_set(&dc->has_dirty, 0);
- cached_dev_put(dc);
SET_BDEV_STATE(&dc->sb, BDEV_STATE_CLEAN);
bch_write_bdev_super(dc, NULL);
/*
@@ -620,6 +619,9 @@ static int bch_writeback_thread(void *ar
}
}
+ dc->writeback_thread = NULL;
+ cached_dev_put(dc);
+
return 0;
}
@@ -683,10 +685,13 @@ int bch_cached_dev_writeback_start(struc
if (!dc->writeback_write_wq)
return -ENOMEM;
+ cached_dev_get(dc);
dc->writeback_thread = kthread_create(bch_writeback_thread, dc,
"bcache_writeback");
- if (IS_ERR(dc->writeback_thread))
+ if (IS_ERR(dc->writeback_thread)) {
+ cached_dev_put(dc);
return PTR_ERR(dc->writeback_thread);
+ }
schedule_delayed_work(&dc->writeback_rate_update,
dc->writeback_rate_update_seconds * HZ);
--- a/drivers/md/bcache/writeback.h
+++ b/drivers/md/bcache/writeback.h
@@ -105,8 +105,6 @@ static inline void bch_writeback_add(str
{
if (!atomic_read(&dc->has_dirty) &&
!atomic_xchg(&dc->has_dirty, 1)) {
- refcount_inc(&dc->count);
-
if (BDEV_STATE(&dc->sb) != BDEV_STATE_DIRTY) {
SET_BDEV_STATE(&dc->sb, BDEV_STATE_DIRTY);
/* XXX: should do this synchronously */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
[ Upstream commit 88893cf787d3062c631cc20b875068eb11756e03 ]
Some tests cause the kernel to print things to the kernel log
buffer (ie. printk), in particular oops and warnings etc. However when
running all the tests in succession it's not always obvious which
test(s) caused the kernel to print something.
We can narrow it down by printing which test directory we're running
in to /dev/kmsg, if it's writable.
Example output:
[ 170.149149] kselftest: Running tests in powerpc
[ 305.300132] kworker/dying (71) used greatest stack depth: 7776 bytes
left
[ 808.915456] kselftest: Running tests in pstore
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/Makefile | 1 +
1 file changed, 1 insertion(+)
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -130,6 +130,7 @@ ifdef INSTALL_PATH
BUILD_TARGET=$$BUILD/$$TARGET; \
echo "echo ; echo Running tests in $$TARGET" >> $(ALL_SCRIPT); \
echo "echo ========================================" >> $(ALL_SCRIPT); \
+ echo "[ -w /dev/kmsg ] && echo \"kselftest: Running tests in $$TARGET\" >> /dev/kmsg" >> $(ALL_SCRIPT); \
echo "cd $$TARGET" >> $(ALL_SCRIPT); \
make -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Coly Li <[email protected]>
[ Upstream commit fadd94e05c02afec7b70b0b14915624f1782f578 ]
In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()",
cached_dev_get() is called when creating dc->writeback_thread, and
cached_dev_put() is called when exiting dc->writeback_thread. This
modification works well unless people detach the bcache device manually by
'echo 1 > /sys/block/bcache<N>/bcache/detach'
Because this sysfs interface only calls bch_cached_dev_detach() which wakes
up dc->writeback_thread but does not stop it. The reason is, before patch
"bcache: fix cached_dev->count usage for bch_cache_set_error()", inside
bch_writeback_thread(), if cache is not dirty after writeback,
cached_dev_put() will be called here. And in cached_dev_make_request() when
a new write request makes cache from clean to dirty, cached_dev_get() will
be called there. Since we don't operate dc->count in these locations,
refcount d->count cannot be dropped after cache becomes clean, and
cached_dev_detach_finish() won't be called to detach bcache device.
This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is
set inside bch_writeback_thread(). If this bit is set and cache is clean
(no existing writeback_keys), break the while-loop, call cached_dev_put()
and quit the writeback thread.
Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the
writeback thread should continue to perform writeback, this is the original
design of manually detach.
It is safe to do the following check without locking, let me explain why,
+ if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
+ (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) {
If the kenrel thread does not sleep and continue to run due to conditions
are not updated in time on the running CPU core, it just consumes more CPU
cycles and has no hurt. This should-sleep-but-run is safe here. We just
focus on the should-run-but-sleep condition, which means the writeback
thread goes to sleep in mistake while it should continue to run.
1, First of all, no matter the writeback thread is hung or not,
kthread_stop() from cached_dev_detach_finish() will wake up it and
terminate by making kthread_should_stop() return true. And in normal
run time, bit on index BCACHE_DEV_DETACHING is always cleared, the
condition
!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags)
is always true and can be ignored as constant value.
2, If one of the following conditions is true, the writeback thread should
go to sleep,
"!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)"
each of them independently controls the writeback thread should sleep or
not, let's analyse them one by one.
2.1 condition "!atomic_read(&dc->has_dirty)"
If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will
call bch_writeback_queue() immediately or call bch_writeback_add() which
indirectly calls bch_writeback_queue() too. In bch_writeback_queue(),
wake_up_process(dc->writeback_thread) is called. It sets writeback
thread's task state to TASK_RUNNING and following an implicit memory
barrier, then tries to wake up the writeback thread.
In writeback thread, its task state is set to TASK_INTERRUPTIBLE before
doing the condition check. If other CPU core sets the TASK_RUNNING state
after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread
will be scheduled to run very soon because its state is not
TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before
writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier
of wake_up_process() will make sure modification of dc->has_dirty on
other CPU core is updated and observed on the CPU core of writeback
thread. Therefore the condition check will correctly be false, and
continue writeback code without sleeping.
2.2 condition "!dc->writeback_running)"
dc->writeback_running can be changed via sysfs file, every time it is
modified, a following bch_writeback_queue() is alwasy called. So the
change is always observed on the CPU core of writeback thread. If
dc->writeback_running is changed from 0 to 1 on other CPU core, this
condition check will observe the modification and allow writeback
thread to continue to run without sleeping.
Now we can see, even without a locking protection, multiple conditions
check is safe here, no deadlock or process hang up will happen.
I compose a separte patch because that patch "bcache: fix cached_dev->count
usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes
Reinecke. Also this fix is not trivial and good for a separate patch.
Signed-off-by: Coly Li <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Huijun Tang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/writeback.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -565,9 +565,15 @@ static int bch_writeback_thread(void *ar
while (!kthread_should_stop()) {
down_write(&dc->writeback_lock);
set_current_state(TASK_INTERRUPTIBLE);
- if (!atomic_read(&dc->has_dirty) ||
- (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
- !dc->writeback_running)) {
+ /*
+ * If the bache device is detaching, skip here and continue
+ * to perform writeback. Otherwise, if no dirty data on cache,
+ * or there is dirty data on cache but writeback is disabled,
+ * the writeback thread should sleep here and wait for others
+ * to wake up it.
+ */
+ if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
+ (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) {
up_write(&dc->writeback_lock);
if (kthread_should_stop()) {
@@ -588,6 +594,14 @@ static int bch_writeback_thread(void *ar
cached_dev_put(dc);
SET_BDEV_STATE(&dc->sb, BDEV_STATE_CLEAN);
bch_write_bdev_super(dc, NULL);
+ /*
+ * If bcache device is detaching via sysfs interface,
+ * writeback thread should stop after there is no dirty
+ * data on cache. BCACHE_DEV_DETACHING flag is set in
+ * bch_cached_dev_detach().
+ */
+ if (test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags))
+ break;
}
up_write(&dc->writeback_lock);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Asseg <[email protected]>
[ Upstream commit 6c59f64b7ecf2bccbe73931d7d573d66ed13b537 ]
Fixes a segfault occurring when e.g. <TAB> is pressed multiple times in the
ncurses tmon application. The segfault is caused by incrementing
cur_thermal_record in the main function without checking if it's value reached
NR_THERMAL_RECORD immediately. Since the boundary check only occurred in
update_thermal_data a race condition existed, which lead to an attempted read
beyond the last element of the trec array.
The fix was implemented by moving the cur_thermal_record incrementation to the
update_thermal_data function using a temporary variable on which the boundary
condition is checked before updating cur_thread_record, so that the variable is
never incremented beyond the trec array's boundary.
It seems the segfault does not occur on every machine: On a HP EliteBook G4 the
segfault happens, while it does not happen on a Thinkpad T540p.
Signed-off-by: Frank Asseg <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/thermal/tmon/sysfs.c | 12 +++++++-----
tools/thermal/tmon/tmon.c | 1 -
2 files changed, 7 insertions(+), 6 deletions(-)
--- a/tools/thermal/tmon/sysfs.c
+++ b/tools/thermal/tmon/sysfs.c
@@ -486,6 +486,7 @@ int zone_instance_to_index(int zone_inst
int update_thermal_data()
{
int i;
+ int next_thermal_record = cur_thermal_record + 1;
char tz_name[256];
static unsigned long samples;
@@ -495,9 +496,9 @@ int update_thermal_data()
}
/* circular buffer for keeping historic data */
- if (cur_thermal_record >= NR_THERMAL_RECORDS)
- cur_thermal_record = 0;
- gettimeofday(&trec[cur_thermal_record].tv, NULL);
+ if (next_thermal_record >= NR_THERMAL_RECORDS)
+ next_thermal_record = 0;
+ gettimeofday(&trec[next_thermal_record].tv, NULL);
if (tmon_log) {
fprintf(tmon_log, "%lu ", ++samples);
fprintf(tmon_log, "%3.1f ", p_param.t_target);
@@ -507,11 +508,12 @@ int update_thermal_data()
snprintf(tz_name, 256, "%s/%s%d", THERMAL_SYSFS, TZONE,
ptdata.tzi[i].instance);
sysfs_get_ulong(tz_name, "temp",
- &trec[cur_thermal_record].temp[i]);
+ &trec[next_thermal_record].temp[i]);
if (tmon_log)
fprintf(tmon_log, "%lu ",
- trec[cur_thermal_record].temp[i]/1000);
+ trec[next_thermal_record].temp[i] / 1000);
}
+ cur_thermal_record = next_thermal_record;
for (i = 0; i < ptdata.nr_cooling_dev; i++) {
char cdev_name[256];
unsigned long val;
--- a/tools/thermal/tmon/tmon.c
+++ b/tools/thermal/tmon/tmon.c
@@ -336,7 +336,6 @@ int main(int argc, char **argv)
show_data_w();
show_cooling_device();
}
- cur_thermal_record++;
time_elapsed += ticktime;
controller_handler(trec[0].temp[target_tz_index] / 1000,
&yk);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leon Romanovsky <[email protected]>
[ Upstream commit 957f6ba8adc7be401a74ccff427e4cfd88d3bfcb ]
The system with CONFIG_UBSAN enabled on produces the following error
during driver initialization. The reason to it that max_reg_cmds can be
larger enough to cause to "1 << max_reg_cmds" overflow the unsigned long.
================================================================================
UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1805:42
signed integer overflow:
-2147483648 - 1 cannot be represented in type 'int'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00032-g06cda2358d9b-dirty #724
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xe9/0x18f
? dma_virt_alloc+0x81/0x81
ubsan_epilogue+0xe/0x4e
handle_overflow+0x187/0x20c
mlx5_cmd_init+0x73a/0x12b0
mlx5_load_one+0x1c3d/0x1d30
init_one+0xd02/0xf10
pci_device_probe+0x26c/0x3b0
driver_probe_device+0x622/0xb40
__driver_attach+0x175/0x1b0
bus_for_each_dev+0xef/0x190
bus_add_driver+0x2db/0x490
driver_register+0x16b/0x1e0
__pci_register_driver+0x177/0x1b0
init+0x6d/0x92
do_one_initcall+0x15b/0x270
kernel_init_freeable+0x2d8/0x3d0
kernel_init+0x14/0x190
ret_from_fork+0x24/0x30
================================================================================
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -1802,7 +1802,7 @@ int mlx5_cmd_init(struct mlx5_core_dev *
cmd->checksum_disabled = 1;
cmd->max_reg_cmds = (1 << cmd->log_sz) - 1;
- cmd->bitmask = (1 << cmd->max_reg_cmds) - 1;
+ cmd->bitmask = (1UL << cmd->max_reg_cmds) - 1;
cmd->cmdif_rev = ioread32be(&dev->iseg->cmdif_rev_fw_sub) >> 16;
if (cmd->cmdif_rev > CMD_IF_REV) {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
[ Upstream commit e1ebd0e5b9d0a10ba65e63a3514b6da8c6a5a819 ]
Current code in power_pmu_disable() does not clear the sampling
registers like Sampling Instruction Address Register (SIAR) and
Sampling Data Address Register (SDAR) after disabling the PMU. Since
these are userspace readable and could contain kernel addresses, add
code to explicitly clear the content of these registers.
Also add a "context synchronizing instruction" to enforce no further
updates to these registers as suggested by Power ISA v3.0B. From
section 9.4, on page 1108:
"If an mtspr instruction is executed that changes the value of a
Performance Monitor register other than SIAR, SDAR, and SIER, the
change is not guaranteed to have taken effect until after a
subsequent context synchronizing instruction has been executed (see
Chapter 11. "Synchronization Requirements for Context Alterations"
on page 1133)."
Signed-off-by: Madhavan Srinivasan <[email protected]>
[mpe: Massage change log and add ISA reference]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/perf/core-book3s.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1236,6 +1236,7 @@ static void power_pmu_disable(struct pmu
*/
write_mmcr0(cpuhw, val);
mb();
+ isync();
/*
* Disable instruction sampling if it was enabled
@@ -1244,12 +1245,26 @@ static void power_pmu_disable(struct pmu
mtspr(SPRN_MMCRA,
cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
mb();
+ isync();
}
cpuhw->disabled = 1;
cpuhw->n_added = 0;
ebb_switch_out(mmcr0);
+
+#ifdef CONFIG_PPC64
+ /*
+ * These are readable by userspace, may contain kernel
+ * addresses and are not switched by context switch, so clear
+ * them now to avoid leaking anything to userspace in general
+ * including to another process.
+ */
+ if (ppmu->flags & PPMU_ARCH_207S) {
+ mtspr(SPRN_SDAR, 0);
+ mtspr(SPRN_SIAR, 0);
+ }
+#endif
}
local_irq_restore(flags);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Honggang Li <[email protected]>
[ Upstream commit 7672ed33c4c15dbe9d56880683baaba4227cf940 ]
Before commit f1b65df5a232 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set the default active_width
and active_speed to IB_WIDTH_4X and IB_SPEED_QDR.
When the RoCE port is down, the RoCE port does not negotiate the active
width with the remote side, causing the active width to be zero. When
running userspace ibstat to view the port status, ibstat will panic as it
reads an invalid width from sys file.
This patch restores the original behavior.
Fixes: f1b65df5a232 ("IB/mlx5: Add support for active_width and active_speed in RoCE").
Signed-off-by: Honggang Li <[email protected]>
Reviewed-by: Hal Rosenstock <[email protected]>
Reviewed-by: Noa Osherovich <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx5/main.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -388,6 +388,9 @@ static int mlx5_query_port_roce(struct i
if (err)
goto out;
+ props->active_width = IB_WIDTH_4X;
+ props->active_speed = IB_SPEED_QDR;
+
translate_eth_proto_oper(eth_prot_oper, &props->active_speed,
&props->active_width);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit de6f83f85be94e0b7d0d324c29ccc9d78a6bb4e7 ]
If 'of_device_get_match_data()' fails, we must undo the previous
'rproc_alloc()' call.
Fixes: a0ff4aa6f010 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/remoteproc/imx_rproc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -339,8 +339,10 @@ static int imx_rproc_probe(struct platfo
}
dcfg = of_device_get_match_data(dev);
- if (!dcfg)
- return -EINVAL;
+ if (!dcfg) {
+ ret = -EINVAL;
+ goto err_put_rproc;
+ }
priv = rproc->priv;
priv->rproc = rproc;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yong Wu <[email protected]>
[ Upstream commit 70ca608b2ec6dafa6bb1c2b0691852fc78f8f717 ]
In MediaTek's IOMMU design, When a iommu translation fault occurs
(HW can NOT translate the destination address to a valid physical
address), the IOMMU HW output the dirty data into a special memory
to avoid corrupting the main memory, this is called "protect memory".
the register(0x114) for protect memory is a little different between
mt8173 and mt2712.
In the mt8173, bit[30:6] in the register represents [31:7] of the
physical address. In the 4GB mode, the register bit[31] should be 1.
While in the mt2712, the bits don't shift. bit[31:7] in the register
represents [31:7] in the physical address, and bit[1:0] in the
register represents bit[33:32] of the physical address if it has.
Fixes: e6dec9230862 ("iommu/mediatek: Add mt2712 IOMMU support")
Reported-by: Honghui Zhang <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/mtk_iommu.c | 15 ++++++++++-----
drivers/iommu/mtk_iommu.h | 1 +
2 files changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -60,7 +60,7 @@
(((prot) & 0x3) << F_MMU_TF_PROTECT_SEL_SHIFT(data))
#define REG_MMU_IVRP_PADDR 0x114
-#define F_MMU_IVRP_PA_SET(pa, ext) (((pa) >> 1) | ((!!(ext)) << 31))
+
#define REG_MMU_VLD_PA_RNG 0x118
#define F_MMU_VLD_PA_RNG(EA, SA) (((EA) << 8) | (SA))
@@ -539,8 +539,13 @@ static int mtk_iommu_hw_init(const struc
F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL);
- writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB),
- data->base + REG_MMU_IVRP_PADDR);
+ if (data->m4u_plat == M4U_MT8173)
+ regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
+ else
+ regval = lower_32_bits(data->protect_base) |
+ upper_32_bits(data->protect_base);
+ writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
+
if (data->enable_4GB && data->m4u_plat != M4U_MT8173) {
/*
* If 4GB mode is enabled, the validate PA range is from
@@ -695,6 +700,7 @@ static int __maybe_unused mtk_iommu_susp
reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
reg->int_main_control = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
+ reg->ivrp_paddr = readl_relaxed(base + REG_MMU_IVRP_PADDR);
clk_disable_unprepare(data->bclk);
return 0;
}
@@ -717,8 +723,7 @@ static int __maybe_unused mtk_iommu_resu
writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
- writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB),
- base + REG_MMU_IVRP_PADDR);
+ writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
if (data->m4u_dom)
writel(data->m4u_dom->cfg.arm_v7s_cfg.ttbr[0],
base + REG_MMU_PT_BASE_ADDR);
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -32,6 +32,7 @@ struct mtk_iommu_suspend_reg {
u32 ctrl_reg;
u32 int_control0;
u32 int_main_control;
+ u32 ivrp_paddr;
};
enum mtk_iommu_plat {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Luis R. Rodriguez" <[email protected]>
[ Upstream commit d15d7311550983be97dca44ad68cbc2ca001297b ]
Currently fw_add_devm_name() returns 1 if the firmware cache
was already set. This makes it complicated for us to check for
correctness. It is actually non-fatal if the firmware cache
is already setup, so just return 0, and simplify the checkers.
fw_add_devm_name() adds device's name onto the devres for the
device so that prior to suspend we cache the firmware onto memory,
so that on resume the firmware is reliably available. We never
were checking for success for this call though, meaning in some
really rare cases we my have never setup the firmware cache for
a device, which could in turn make resume fail.
This is all theoretical, no known issues have been reported.
This small issue has been present way since the addition of the
devres firmware cache names on v3.7.
Fixes: f531f05ae9437 ("firmware loader: store firmware name into devres list")
Signed-off-by: Luis R. Rodriguez <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/firmware_class.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -524,7 +524,7 @@ static int fw_add_devm_name(struct devic
fwn = fw_find_devm_name(dev, name);
if (fwn)
- return 1;
+ return 0;
fwn = devres_alloc(fw_name_devm_release, sizeof(struct fw_name_devm),
GFP_KERNEL);
@@ -552,6 +552,7 @@ static int assign_fw(struct firmware *fw
unsigned int opt_flags)
{
struct fw_priv *fw_priv = fw->priv;
+ int ret;
mutex_lock(&fw_lock);
if (!fw_priv->size || fw_state_is_aborted(fw_priv)) {
@@ -568,8 +569,13 @@ static int assign_fw(struct firmware *fw
*/
/* don't cache firmware handled without uevent */
if (device && (opt_flags & FW_OPT_UEVENT) &&
- !(opt_flags & FW_OPT_NOCACHE))
- fw_add_devm_name(device, fw_priv->fw_name);
+ !(opt_flags & FW_OPT_NOCACHE)) {
+ ret = fw_add_devm_name(device, fw_priv->fw_name);
+ if (ret) {
+ mutex_unlock(&fw_lock);
+ return ret;
+ }
+ }
/*
* After caching firmware image is started, let it piggyback
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Sandeen <[email protected]>
[ Upstream commit 0d9366d67bcf066b028e57d09c9a86ce879bcc28 ]
If mount is auto-probing for filesystem type, it will try various
filesystems in order, with the MS_SILENT flag set. We get
that flag as the silent arg to ext4_fill_super.
If we're probing (silent==1) then don't complain about feature
incompatibilities that are found if it looks like it's actually
a different valid extN type - failed probes should be silent
in this case.
If the on-disk features are unknown even to ext4, then complain.
Reported-by: Joakim Tjernlund <[email protected]>
Tested-by: Joakim Tjernlund <[email protected]>
Signed-off-by: Eric Sandeen <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3663,6 +3663,12 @@ static int ext4_fill_super(struct super_
ext4_msg(sb, KERN_INFO, "mounting ext2 file system "
"using the ext4 subsystem");
else {
+ /*
+ * If we're probing be silent, if this looks like
+ * it's actually an ext[34] filesystem.
+ */
+ if (silent && ext4_feature_set_ok(sb, sb_rdonly(sb)))
+ goto failed_mount;
ext4_msg(sb, KERN_ERR, "couldn't mount as ext2 due "
"to feature incompatibilities");
goto failed_mount;
@@ -3674,6 +3680,12 @@ static int ext4_fill_super(struct super_
ext4_msg(sb, KERN_INFO, "mounting ext3 file system "
"using the ext4 subsystem");
else {
+ /*
+ * If we're probing be silent, if this looks like
+ * it's actually an ext4 filesystem.
+ */
+ if (silent && ext4_feature_set_ok(sb, sb_rdonly(sb)))
+ goto failed_mount;
ext4_msg(sb, KERN_ERR, "couldn't mount as ext3 due "
"to feature incompatibilities");
goto failed_mount;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chunyu Hu <[email protected]>
[ Upstream commit 55b55abc17f238c61921360e61dde90dd9a326d1 ]
Kmemleak reported the below leak. When cppc_cpufreq_init went into
failure path, the cpu mask is not freed. After fix, this report is
gone. And to avaoid potential NULL pointer reference, check the cpu
value first.
unreferenced object 0xffff800fd5ea4880 (size 128):
comm "swapper/0", pid 1, jiffies 4294939510 (age 668.680s)
hex dump (first 32 bytes):
00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 .... ...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffff0000082c4ae4>] __kmalloc_node+0x278/0x634
[<ffff0000088f4a74>] alloc_cpumask_var_node+0x28/0x60
[<ffff0000088f4af0>] zalloc_cpumask_var+0x14/0x1c
[<ffff000008d20254>] cppc_cpufreq_init+0xd0/0x19c
[<ffff000008083828>] do_one_initcall+0xec/0x15c
[<ffff000008cd1018>] kernel_init_freeable+0x1f4/0x2a4
[<ffff0000089099b0>] kernel_init+0x18/0x10c
[<ffff000008084d50>] ret_from_fork+0x10/0x18
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Chunyu Hu <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/cppc_cpufreq.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -243,8 +243,13 @@ static int __init cppc_cpufreq_init(void
return ret;
out:
- for_each_possible_cpu(i)
- kfree(all_cpu_data[i]);
+ for_each_possible_cpu(i) {
+ cpu = all_cpu_data[i];
+ if (!cpu)
+ break;
+ free_cpumask_var(cpu->shared_cpu_map);
+ kfree(cpu);
+ }
kfree(all_cpu_data);
return -ENODEV;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Schmitz <[email protected]>
[ Upstream commit 55496d3fe2acd1a365c43cbd613a20ecd4d74395 ]
The generic DMA API uses dev->dma_mask to check the DMA addressable
memory bitmask, and warns if no mask is set or even allocated.
Set z->dev.dma_coherent_mask on Zorro bus scan, and make z->dev.dma_mask
to point to z->dev.dma_coherent_mask so device drivers that need DMA have
everything set up to avoid warnings from dma_alloc_coherent(). Drivers can
still use dma_set_mask_and_coherent() to explicitly set their DMA bit mask.
Signed-off-by: Michael Schmitz <[email protected]>
[geert: Handle Zorro II with 24-bit address space]
Acked-by: Christoph Hellwig <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/zorro/zorro.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -16,6 +16,7 @@
#include <linux/bitops.h>
#include <linux/string.h>
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
@@ -185,6 +186,17 @@ static int __init amiga_zorro_probe(stru
z->dev.parent = &bus->dev;
z->dev.bus = &zorro_bus_type;
z->dev.id = i;
+ switch (z->rom.er_Type & ERT_TYPEMASK) {
+ case ERT_ZORROIII:
+ z->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ break;
+
+ case ERT_ZORROII:
+ default:
+ z->dev.coherent_dma_mask = DMA_BIT_MASK(24);
+ break;
+ }
+ z->dev.dma_mask = &z->dev.coherent_dma_mask;
}
/* ... then register them */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Gruenbacher <[email protected]>
[ Upstream commit bb491ce67aa7c1635e5ae4f2f304a7d13d3dbe71 ]
When punching a hole or truncating an inode down to a given size, also
check if the truncate point / start of the hole is within the range we
have metadata for. Otherwise, we can end up freeing blocks that
shouldn't be freed, corrupting the inode, or crashing the machine when
trying to punch a hole into the void.
When growing an inode via truncate, we set the new size but we don't
allocate additional levels of indirect blocks and grow the inode height.
When shrinking that inode again, the new size may still point beyond the
end of the inode's metadata.
Fixes xfstest generic/476.
Debugged-by: Bob Peterson <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/bmap.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1344,6 +1344,7 @@ static inline bool walk_done(struct gfs2
static int punch_hole(struct gfs2_inode *ip, u64 offset, u64 length)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ u64 maxsize = sdp->sd_heightsize[ip->i_height];
struct metapath mp = {};
struct buffer_head *dibh, *bh;
struct gfs2_holder rd_gh;
@@ -1359,6 +1360,14 @@ static int punch_hole(struct gfs2_inode
u64 prev_bnr = 0;
__be64 *start, *end;
+ if (offset >= maxsize) {
+ /*
+ * The starting point lies beyond the allocated meta-data;
+ * there are no blocks do deallocate.
+ */
+ return 0;
+ }
+
/*
* The start position of the hole is defined by lblock, start_list, and
* start_aligned. The end position of the hole is defined by lend,
@@ -1372,7 +1381,6 @@ static int punch_hole(struct gfs2_inode
*/
if (length) {
- u64 maxsize = sdp->sd_heightsize[ip->i_height];
u64 end_offset = offset + length;
u64 lend;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Madhavan Srinivasan <[email protected]>
[ Upstream commit bb19af816025d495376bd76bf6fbcf4244f9a06d ]
The current Branch History Rolling Buffer (BHRB) code does not check
for any privilege levels before updating the data from BHRB. This
could leak kernel addresses to userspace even when profiling only with
userspace privileges. Add proper checks to prevent it.
Acked-by: Balbir Singh <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/perf/core-book3s.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -457,6 +457,16 @@ static void power_pmu_bhrb_read(struct c
/* invalid entry */
continue;
+ /*
+ * BHRB rolling buffer could very much contain the kernel
+ * addresses at this point. Check the privileges before
+ * exporting it to userspace (avoid exposure of regions
+ * where we could have speculative execution)
+ */
+ if (perf_paranoid_kernel() && !capable(CAP_SYS_ADMIN) &&
+ is_kernel_addr(addr))
+ continue;
+
/* Branches are read most recent first (ie. mfbhrb 0 is
* the most recent branch).
* There are two types of valid entries:
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mimi Zohar <[email protected]>
[ Upstream commit a9a4935d44b58c858a81393694bc232a96cdcbd4 ]
The IMA_APPRAISE and IMA_HASH policies overlap. Clear IMA_HASH properly.
Fixes: da1b0029f527 ("ima: support new "hash" and "dont_hash" policy actions")
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/integrity/ima/ima_policy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -384,7 +384,7 @@ int ima_match_policy(struct inode *inode
action |= entry->action & IMA_DO_MASK;
if (entry->action & IMA_APPRAISE) {
action |= get_subaction(entry, func);
- action ^= IMA_HASH;
+ action &= ~IMA_HASH;
}
if (entry->action & IMA_DO_MASK)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Hellstrom <[email protected]>
[ Upstream commit 20fb5a635a0c8478ac98f15cfafc2ea83df29565 ]
We were relying on the pinned screen object backup buffer to be destroyed
when not used. But if we hold a copy of the atomic state, like when
hibernating, the backup buffer might not be destroyed since it's
refcounted by the atomic state. This causes us to hibernate with a
buffer pinned in VRAM.
Fix this by only having the buffer pinned when it is actually used by a
screen object.
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Brian Paul <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
@@ -453,7 +453,11 @@ vmw_sou_primary_plane_cleanup_fb(struct
struct drm_plane_state *old_state)
{
struct vmw_plane_state *vps = vmw_plane_state_to_vps(old_state);
+ struct drm_crtc *crtc = plane->state->crtc ?
+ plane->state->crtc : old_state->crtc;
+ if (vps->dmabuf)
+ vmw_dmabuf_unpin(vmw_priv(crtc->dev), vps->dmabuf, false);
vmw_dmabuf_unreference(&vps->dmabuf);
vps->dmabuf_size = 0;
@@ -491,10 +495,17 @@ vmw_sou_primary_plane_prepare_fb(struct
}
size = new_state->crtc_w * new_state->crtc_h * 4;
+ dev_priv = vmw_priv(crtc->dev);
if (vps->dmabuf) {
- if (vps->dmabuf_size == size)
- return 0;
+ if (vps->dmabuf_size == size) {
+ /*
+ * Note that this might temporarily up the pin-count
+ * to 2, until cleanup_fb() is called.
+ */
+ return vmw_dmabuf_pin_in_vram(dev_priv, vps->dmabuf,
+ true);
+ }
vmw_dmabuf_unreference(&vps->dmabuf);
vps->dmabuf_size = 0;
@@ -504,7 +515,6 @@ vmw_sou_primary_plane_prepare_fb(struct
if (!vps->dmabuf)
return -ENOMEM;
- dev_priv = vmw_priv(crtc->dev);
vmw_svga_enable(dev_priv);
/* After we have alloced the backing store might not be able to
@@ -515,13 +525,16 @@ vmw_sou_primary_plane_prepare_fb(struct
&vmw_vram_ne_placement,
false, &vmw_dmabuf_bo_free);
vmw_overlay_resume_all(dev_priv);
-
- if (ret != 0)
+ if (ret) {
vps->dmabuf = NULL; /* vmw_dmabuf_init frees on error */
- else
- vps->dmabuf_size = size;
+ return ret;
+ }
- return ret;
+ /*
+ * TTM already thinks the buffer is pinned, but make sure the
+ * pin_count is upped.
+ */
+ return vmw_dmabuf_pin_in_vram(dev_priv, vps->dmabuf, true);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philipp Puschmann <[email protected]>
[ Upstream commit 6d97d5aba08b26108f95dc9fb7bbe4d9436c769c ]
Fixes the warning "GIC: PPI13 is secure or misconfigured" by
changing the interrupt type from level_low to edge_raising
Signed-off-by: Philipp Puschmann <[email protected]>
Signed-off-by: Dinh Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/socfpga.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -831,7 +831,7 @@
timer@fffec600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xfffec600 0x100>;
- interrupts = <1 13 0xf04>;
+ interrupts = <1 13 0xf01>;
clocks = <&mpu_periph_clk>;
};
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arjun Vynipadath <[email protected]>
[ Upstream commit 843bd7db79c861b49e2912d723625f5fa8e94502 ]
When NetworkManager is enabled, there are chances that interface up
is called even before probe completes. This means we have not yet
allocated the FW sge queues, hence rest of ingress queue allocation
wont be proper. Fix this by calling setup_fw_sge_queues() before
register_netdev().
Fixes: 0fbc81b3ad51 ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's')
Signed-off-by: Arjun Vynipadath <[email protected]>
Signed-off-by: Casey Leedom <[email protected]>
Signed-off-by: Ganesh Goudar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -833,8 +833,6 @@ static int setup_fw_sge_queues(struct ad
err = t4_sge_alloc_rxq(adap, &s->fw_evtq, true, adap->port[0],
adap->msi_idx, NULL, fwevtq_handler, NULL, -1);
- if (err)
- t4_free_sge_resources(adap);
return err;
}
@@ -5474,6 +5472,13 @@ static int init_one(struct pci_dev *pdev
if (err)
goto out_free_dev;
+ err = setup_fw_sge_queues(adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev,
+ "FW sge queue allocation failed, err %d", err);
+ goto out_free_dev;
+ }
+
/*
* The card is now ready to go. If any errors occur during device
* registration we do not fail the whole card but rather proceed only
@@ -5522,10 +5527,10 @@ static int init_one(struct pci_dev *pdev
cxgb4_ptp_init(adapter);
print_adapter_info(adapter);
- setup_fw_sge_queues(adapter);
return 0;
out_free_dev:
+ t4_free_sge_resources(adapter);
free_some_resources(adapter);
if (adapter->flags & USING_MSIX)
free_msix_info(adapter);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Petr Vorel <[email protected]>
[ Upstream commit ab60368ab6a452466885ef4edf0cefd089465132 ]
IMA requires having it's hash algorithm be compiled-in due to it's
early use. The default IMA algorithm is protected by Kconfig to be
compiled-in.
The ima_hash kernel parameter allows to choose the hash algorithm. When
the specified algorithm is not available or available as a module, IMA
initialization fails, which leads to a kernel panic (mknodat syscall calls
ima_post_path_mknod()). Therefore as fallback we force IMA to use
the default builtin Kconfig hash algorithm.
Fixed crash:
$ grep CONFIG_CRYPTO_MD4 .config
CONFIG_CRYPTO_MD4=m
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4
...
[ 1.545190] ima: Can not allocate md4 (reason: -2)
...
[ 2.610120] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2.611903] IP: ima_match_policy+0x23/0x390
[ 2.612967] PGD 0 P4D 0
[ 2.613080] Oops: 0000 [#1] SMP
[ 2.613080] Modules linked in: autofs4
[ 2.613080] Supported: Yes
[ 2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1
[ 2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
[ 2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000
[ 2.613080] RIP: 0010:ima_match_policy+0x23/0x390
[ 2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296
[ 2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004
[ 2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728
[ 2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000
[ 2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f
[ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000
[ 2.613080] FS: 00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[ 2.613080] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0
[ 2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.613080] Call Trace:
[ 2.613080] ? shmem_mknod+0xbf/0xd0
[ 2.613080] ima_post_path_mknod+0x1c/0x40
[ 2.613080] SyS_mknod+0x210/0x220
[ 2.613080] entry_SYSCALL_64_fastpath+0x1a/0xa5
[ 2.613080] RIP: 0033:0x7f5c1bfde570
[ 2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085
[ 2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570
[ 2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f
[ 2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000
[ 2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660
[ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002
[ 2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20
[ 2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88
[ 2.613080] CR2: 0000000000000000
[ 2.613080] ---[ end trace 9a9f0a8a73079f6a ]---
[ 2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 2.673052]
[ 2.675337] Kernel Offset: disabled
[ 2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
Signed-off-by: Petr Vorel <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/integrity/ima/ima_crypto.c | 2 ++
security/integrity/ima/ima_main.c | 13 +++++++++++++
2 files changed, 15 insertions(+)
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -73,6 +73,8 @@ int __init ima_init_crypto(void)
hash_algo_name[ima_hash_algo], rc);
return rc;
}
+ pr_info("Allocated hash algorithm: %s\n",
+ hash_algo_name[ima_hash_algo]);
return 0;
}
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -16,6 +16,9 @@
* implements the IMA hooks: ima_bprm_check, ima_file_mmap,
* and ima_file_check.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/file.h>
#include <linux/binfmts.h>
@@ -472,6 +475,16 @@ static int __init init_ima(void)
ima_init_template_list();
hash_setup(CONFIG_IMA_DEFAULT_HASH);
error = ima_init();
+
+ if (error && strcmp(hash_algo_name[ima_hash_algo],
+ CONFIG_IMA_DEFAULT_HASH) != 0) {
+ pr_info("Allocating %s failed, going to use default hash algorithm %s\n",
+ hash_algo_name[ima_hash_algo], CONFIG_IMA_DEFAULT_HASH);
+ hash_setup_done = 0;
+ hash_setup(CONFIG_IMA_DEFAULT_HASH);
+ error = ima_init();
+ }
+
if (!error) {
ima_initialized = 1;
ima_update_policy_flag();
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Milton Miller <[email protected]>
[ Upstream commit 6ffa3402211acc30e47e691e14d62f3fd065a54e ]
Allow the device tree to specify a watchdog to fallover to
the alternate boot source.
The aspeeed watchdog can set a latch directing flash chip select 0 to
chip select 1, allowing boot from an alternate media if the watchdog
is not reset in time. On the ast2400 bank 1 also goes to flash bank 1,
while on the ast2500 the chip selects are swapped.
Also clear the secondary boot bit during the machine restart operation.
Otherwise, the system will switch to the alternate boot after every
reboot, which is not desired.
Signed-off-by: Milton Miller <[email protected]>
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/aspeed_wdt.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -46,6 +46,7 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_ta
#define WDT_RELOAD_VALUE 0x04
#define WDT_RESTART 0x08
#define WDT_CTRL 0x0C
+#define WDT_CTRL_BOOT_SECONDARY BIT(7)
#define WDT_CTRL_RESET_MODE_SOC (0x00 << 5)
#define WDT_CTRL_RESET_MODE_FULL_CHIP (0x01 << 5)
#define WDT_CTRL_RESET_MODE_ARM_CPU (0x10 << 5)
@@ -158,6 +159,7 @@ static int aspeed_wdt_restart(struct wat
{
struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
+ wdt->ctrl &= ~WDT_CTRL_BOOT_SECONDARY;
aspeed_wdt_enable(wdt, 128 * WDT_RATE_1MHZ / 1000);
mdelay(1000);
@@ -242,6 +244,8 @@ static int aspeed_wdt_probe(struct platf
}
if (of_property_read_bool(np, "aspeed,external-signal"))
wdt->ctrl |= WDT_CTRL_WDT_EXT;
+ if (of_property_read_bool(np, "aspeed,alt-boot"))
+ wdt->ctrl |= WDT_CTRL_BOOT_SECONDARY;
if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) {
/*
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anand Jain <[email protected]>
[ Upstream commit acf18c56fdcb952a06650282192e3b4ca1855c5e ]
The replace target device can be missing when mounted with -o degraded,
but we wont allocate a missing btrfs_device to it. So check the device
before accessing.
BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
IP: btrfs_destroy_dev_replace_tgtdev+0x43/0xf0 [btrfs]
Call Trace:
btrfs_dev_replace_cancel+0x15f/0x180 [btrfs]
btrfs_ioctl+0x2216/0x2590 [btrfs]
do_vfs_ioctl+0x625/0x650
SyS_ioctl+0x4e/0x80
do_syscall_64+0x5d/0x160
entry_SYSCALL64_slow_path+0x25/0x25
This patch has been moved in front of patch "btrfs: log, when replace,
is canceled by the user" that could reproduce the crash if the system
reboots inside btrfs_dev_replace_start before the
btrfs_dev_replace_finishing call.
$ mkfs /dev/sda
$ mount /dev/sda mnt
$ btrfs replace start /dev/sda /dev/sdb
<insert reboot>
$ mount po degraded /dev/sdb mnt
<crash>
Signed-off-by: Anand Jain <[email protected]>
[ added reproducer description from mail ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/dev-replace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -307,7 +307,7 @@ void btrfs_after_dev_replace_commit(stru
static char* btrfs_dev_name(struct btrfs_device *device)
{
- if (test_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state))
+ if (!device || test_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state))
return "<missing disk>";
else
return rcu_str_deref(device->name);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Karthikeyan Periyasamy <[email protected]>
[ Upstream commit 8b2d93dd22615cb7f3046a5a2083a6f8bb8052ed ]
When attempt to run worker (ath10k_sta_rc_update_wk) after the station object
(ieee80211_sta) delete will trigger the kernel panic.
This problem arise in AP + Mesh configuration, Where the current node AP VAP
and neighbor node mesh VAP MAC address are same. When the current mesh node
try to establish the mesh link with neighbor node, driver peer creation for
the neighbor mesh node fails due to duplication MAC address. Already the AP
VAP created with same MAC address.
It is caused by the following scenario steps.
Steps:
1. In above condition, ath10k driver sta_state callback (ath10k_sta_state)
fails to do the state change for a station from IEEE80211_STA_NOTEXIST
to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is
called from ieee80211_add_station() to handle the new station
(neighbor mesh node) request from the wpa_supplicant.
2. Concurrently ath10k receive the sta_rc_update callback notification from
the mesh_neighbour_update() to handle the beacon frames of the above
neighbor mesh node. since its atomic callback, ath10k driver queue the
work (ath10k_sta_rc_update_wk) to handle rc update.
3. Due to driver sta_state callback fails (step 1), mac80211 free the station
object.
4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access
the station object which is already deleted. so it will trigger kernel
panic.
Added the peer exist check in sta_rc_update callback before queue the work.
Kernel Panic log:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0204000
[00000000] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1
task: dcef0000 ti: d72b6000 task.ti: d72b6000
PC is at pwq_activate_delayed_work+0x10/0x40
LR is at pwq_activate_delayed_work+0xc/0x40
pc : [<c023f988>] lr : [<c023f984>] psr: 40000193
sp : d72b7f18 ip : 0000007a fp : d72b6000
r10: 00000000 r9 : dd404414 r8 : d8c31998
r7 : d72b6038 r6 : 00000004 r5 : d4907ec8 r4 : dcee1300
r3 : ffffffe0 r2 : 00000000 r1 : 00000001 r0 : 00000000
Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5787d Table: 595bc06a DAC: 00000015
...
Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238)
Stack: (0xd72b7f18 to 0xd72b8000)
7f00: 00000001 dcee1300
7f20: 00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089
7f40: 00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000
7f60: 00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000
7f80: d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340
7fa0: c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000
7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c023f988>] (pwq_activate_delayed_work) from [<c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4)
[<c02410dc>] (pwq_dec_nr_in_flight) from [<c0242790>] (worker_thread+0x228/0x360)
[<c0242790>] (worker_thread) from [<c02474dc>] (kthread+0xd8/0xec)
[<c02474dc>] (kthread) from [<c0208d20>] (ret_from_fork+0x14/0x34)
Code: e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs
Rebooting in 3 seconds..
Signed-off-by: Karthikeyan Periyasamy <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7084,10 +7084,20 @@ static void ath10k_sta_rc_update(struct
{
struct ath10k *ar = hw->priv;
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k_vif *arvif = (void *)vif->drv_priv;
+ struct ath10k_peer *peer;
u32 bw, smps;
spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, sta->addr);
+ if (!peer) {
+ spin_unlock_bh(&ar->data_lock);
+ ath10k_warn(ar, "mac sta rc update failed to find peer %pM on vdev %i\n",
+ sta->addr, arvif->vdev_id);
+ return;
+ }
+
ath10k_dbg(ar, ATH10K_DBG_MAC,
"mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
sta->addr, changed, sta->bandwidth, sta->rx_nss,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fuyun Liang <[email protected]>
[ Upstream commit 3bd6d258b1d5f76744567855d1376358a94f127d ]
The return type of hns3_get_rss_key_size is u32. But a negative value is
returned. This patch fixes it by replacing the negative value with zero.
Signed-off-by: Fuyun Liang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -698,7 +698,7 @@ static u32 hns3_get_rss_key_size(struct
if (!h->ae_algo || !h->ae_algo->ops ||
!h->ae_algo->ops->get_rss_key_size)
- return -EOPNOTSUPP;
+ return 0;
return h->ae_algo->ops->get_rss_key_size(h);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haiyang Zhang <[email protected]>
[ Upstream commit 5c71dadbb45970a8f0544a27ae8f1cbd9750e516 ]
As defined in hyperv_net.h, the NVSP_STAT_SUCCESS is one not zero.
Some functions returns 0 when it actually means NVSP_STAT_SUCCESS.
This patch fixes them.
In netvsc_receive(), it puts the last RNDIS packet's receive status
for all packets in a vmxferpage which may contain multiple RNDIS
packets.
This patch puts NVSP_STAT_FAIL in the receive completion if one of
the packets in a vmxferpage fails.
Signed-off-by: Haiyang Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/hyperv/netvsc.c | 8 ++++++--
drivers/net/hyperv/netvsc_drv.c | 2 +-
drivers/net/hyperv/rndis_filter.c | 4 ++--
3 files changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -1078,10 +1078,14 @@ static int netvsc_receive(struct net_dev
void *data = recv_buf
+ vmxferpage_packet->ranges[i].byte_offset;
u32 buflen = vmxferpage_packet->ranges[i].byte_count;
+ int ret;
/* Pass it to the upper layer */
- status = rndis_filter_receive(ndev, net_device,
- channel, data, buflen);
+ ret = rndis_filter_receive(ndev, net_device,
+ channel, data, buflen);
+
+ if (unlikely(ret != NVSP_STAT_SUCCESS))
+ status = NVSP_STAT_FAIL;
}
enq_receive_complete(ndev, net_device, q_idx,
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -831,7 +831,7 @@ int netvsc_recv_callback(struct net_devi
u64_stats_update_end(&rx_stats->syncp);
napi_gro_receive(&nvchan->napi, skb);
- return 0;
+ return NVSP_STAT_SUCCESS;
}
static void netvsc_get_drvinfo(struct net_device *net,
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -434,10 +434,10 @@ int rndis_filter_receive(struct net_devi
"unhandled rndis message (type %u len %u)\n",
rndis_msg->ndis_msg_type,
rndis_msg->msg_len);
- break;
+ return NVSP_STAT_FAIL;
}
- return 0;
+ return NVSP_STAT_SUCCESS;
}
static int rndis_filter_query_device(struct rndis_device *dev,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Gottschall <[email protected]>
[ Upstream commit 221b6ec69ed9c56b6cd9a124a387a9472f14284e ]
Fixes crash seen on arm smp systems (gateworks ventana imx6):
Unable to handle kernel NULL pointer dereference at virtual address 00000014
pgd = 80004000
[00000014] *pgd=00000000
Internal error: Oops - BUG: 17 [#1] PREEMPT SMP ARM
Modules linked in: ip6table_filter nf_conntrack_ipv6 ip6_tables nf_log_ipv6 nf_defrag_ipv6 shortcut_fe ipcomp6 xfrm_ipcomp xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_ro xfrm6_mode_beet ip6_tunnel tunnel6 mip6 ah6 esp6 xfrm_algo sit ip_tunnel tunnel4 ipv6 ath10k_pci ath10k_core ath9k ath mac80211 cfg80211 compat ath_pci ath_hal(P) caamalg authencesn authenc caamrng caamhash caam_jr caam cdc_ncm usbnet usbcore sky2 imx2_wdt
CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: P 4.9.85 #19
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task: bf064980 task.stack: bf07c000
PC is at relay_buf_full+0xc/0x30
LR is at _674+0x740/0xf10 [ath9k]
pc : [<8018bce0>] lr : [<7f1aa604>] psr: 80000013
sp : bf07dbf0 ip : bf07dc00 fp : bf07dbfc
r10: 0000003f r9 : bf130e00 r8 : 809044b0
r7 : 00000000 r6 : be67a9f0 r5 : 00000000 r4 : 809043e4
r3 : c0864c24 r2 : 00000000 r1 : 00000004 r0 : 00000000
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c5387d Table: 4e6a004a DAC: 00000055
Process ksoftirqd/0 (pid: 3, stack limit = 0xbf07c210)
Stack: (0xbf07dbf0 to 0xbf07e000)
dbe0: bf07dd04 bf07dc00 7f1aa604 8018bce0
dc00: 00004014 be59e010 bf07dc34 bf07dc18 7f1a7084 7f19c07c be59c010 be6470a0
dc20: 0000096c be648954 bf07dc6c bf07dc38 7f1c286c bf07dd90 bf07dc5c bf07dc48
dc40: 8029ea4c 0000003c 00000001 be59c010 00000094 00000000 00000000 00000000
dc60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dc80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dca0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dcc0: 00000000 00000000 00000000 00000000 00000000 00000000 8010ef24 00000030
dce0: be94f5e8 be6485a0 bddf0200 be59c010 be6465a0 be6415a0 bf07ddf4 bf07dd08
dd00: 7f1cf800 7f1aa55c 1fc38c4c 00000000 bf07dd58 cccccccd 66666667 be640bc0
dd20: bf07dd54 be6415a0 1fc38c4c 00000000 00000000 be59c038 be67a9c0 be59e010
dd40: be67a9f0 be647170 8090c904 be59c010 00000000 00000001 1fc38e84 00000000
dd60: be640bc0 bddf0200 00000200 00000010 0000003f 00000002 20000013 be59c010
dd80: 8092d940 bf7ca2c0 bf07ddb4 bf07dd98 1fc38c4c 2602003f 0100ff1b 80ff1b00
dda0: 00808080 00000000 00000000 80808080 80808080 80808080 80808080 00008080
ddc0: 00000000 00000000 7f1b62b8 00000002 be6470ec be6470f0 00000000 bf07de98
dde0: 8092d940 be6415a0 bf07de94 bf07ddf8 7f1d1ed8 7f1cf1fc 00000000 00000000
de00: bf7cc4c0 00000400 be6470f0 bf07de18 8015165c be59c010 8090453c 8090453c
de20: bf07dec4 be6465a0 8014f614 80148884 0000619a 00000001 bf07c000 00000100
de40: bf07de78 00000001 7f327850 00000002 afb50401 bf064980 bf07de9c bf07de68
de60: bf064a00 803cc668 bf064a00 be6470b4 be6470b8 80844180 00000000 bf07de98
de80: 8092d940 bf07c000 bf07dec4 bf07de98 80124d18 7f1d1c44 80124c94 00000000
dea0: 00000006 80902098 80902080 40000006 00000100 bf07c000 bf07df24 bf07dec8
dec0: 8012501c 80124ca0 bf7cc4c0 bf064980 be95e1c0 04208040 80902d00 000061c7
dee0: 0000000a 80600b54 8092d940 808441f8 80902080 bf07dec8 bf03b200 bf07c000
df00: bf03b200 8090fe54 00000000 00000000 00000000 00000000 bf07df34 bf07df28
df20: 80125148 80124f28 bf07df5c bf07df38 8013deb4 8012511c 00000000 bf03b240
df40: bf03b200 8013dc90 00000000 00000000 bf07dfac bf07df60 8013ad40 8013dc9c
df60: 70448040 00000001 00000000 bf03b200 00000000 00030003 bf07df78 bf07df78
df80: 00000000 00000000 bf07df88 bf07df88 bf03b240 8013ac48 00000000 00000000
dfa0: 00000000 bf07dfb0 80107760 8013ac54 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 8c120004 1190ad04
Backtrace:
[<8018bcd4>] (relay_buf_full) from [<7f1aa604>] (_674+0x740/0xf10 [ath9k])
[<7f1aa550>] (_674 [ath9k]) from [<7f1cf800>] (_582+0x14b4/0x3708 [ath9k])
r10:be6415a0 r9:be6465a0 r8:be59c010 r7:bddf0200 r6:be6485a0 r5:be94f5e8
r4:00000030
[<7f1cf1f0>] (_582 [ath9k]) from [<7f1d1ed8>] (_735+0x2a0/0xec4 [ath9k])
r10:be6415a0 r9:8092d940 r8:bf07de98 r7:00000000 r6:be6470f0 r5:be6470ec
r4:00000002
[<7f1d1c38>] (_735 [ath9k]) from [<80124d18>] (tasklet_action+0x84/0xf8)
r10:bf07c000 r9:8092d940 r8:bf07de98 r7:00000000 r6:80844180 r5:be6470b8
r4:be6470b4
[<80124c94>] (tasklet_action) from [<8012501c>] (__do_softirq+0x100/0x1f4)
r10:bf07c000 r9:00000100 r8:40000006 r7:80902080 r6:80902098 r5:00000006
r4:00000000 r3:80124c94
[<80124f1c>] (__do_softirq) from [<80125148>] (run_ksoftirqd+0x38/0x4c)
r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:8090fe54 r5:bf03b200
r4:bf07c000
[<80125110>] (run_ksoftirqd) from [<8013deb4>] (smpboot_thread_fn+0x224/0x260)
[<8013dc90>] (smpboot_thread_fn) from [<8013ad40>] (kthread+0xf8/0x100)
r9:00000000 r8:00000000 r7:8013dc90 r6:bf03b200 r5:bf03b240 r4:00000000
[<8013ac48>] (kthread) from [<80107760>] (ret_from_fork+0x14/0x34)
r7:00000000 r6:00000000 r5:8013ac48 r4:bf03b240
Code: e89da800 e1a0c00d e92dd800 e24cb004 (e5901014)
---[ end trace dddf11ac9111b272 ]---
Kernel panic - not syncing: Fatal exception in interrupt
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: P D 4.9.85 #19
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<8010a708>] (dump_backtrace) from [<8010a99c>] (show_stack+0x18/0x1c)
r7:bf093f58 r6:20000193 r5:809168e8 r4:00000000
[<8010a984>] (show_stack) from [<802a09c4>] (dump_stack+0x94/0xa8)
[<802a0930>] (dump_stack) from [<8010d184>] (handle_IPI+0xe8/0x180)
r7:bf093f58 r6:00000000 r5:00000001 r4:808478c4
[<8010d09c>] (handle_IPI) from [<801013e8>] (gic_handle_irq+0x78/0x7c)
r7:f4000100 r6:bf093f58 r5:f400010c r4:8090467c
[<80101370>] (gic_handle_irq) from [<8010b378>] (__irq_svc+0x58/0x8c)
Exception stack(0xbf093f58 to 0xbf093fa0)
3f40: bf7d62a0 00000000
3f60: 0010a5f4 80113460 bf092000 809043e4 00000002 80904434 bf092008 412fc09a
3f80: 00000000 bf093fb4 bf093fb8 bf093fa8 8010804c 80108050 60000013 ffffffff
r9:bf092000 r8:bf092008 r7:bf093f8c r6:ffffffff r5:60000013 r4:80108050
[<80108014>] (arch_cpu_idle) from [<80553c2c>] (default_idle_call+0x30/0x34)
[<80553bfc>] (default_idle_call) from [<80158394>] (cpu_startup_entry+0xc4/0xfc)
[<801582d0>] (cpu_startup_entry) from [<8010ce40>] (secondary_start_kernel+0x168/0x174)
r7:8092d2f8 r4:80913568
[<8010ccd8>] (secondary_start_kernel) from [<10101488>] (0x10101488)
r5:00000055 r4:4f07806a
Rebooting in 10 seconds..
Reboot failed -- System halted
Signed-off-by: Sebastian Gottschall <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/common-spectral.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/net/wireless/ath/ath9k/common-spectral.c
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
@@ -479,14 +479,16 @@ ath_cmn_is_fft_buf_full(struct ath_spec_
{
int i = 0;
int ret = 0;
+ struct rchan_buf *buf;
struct rchan *rc = spec_priv->rfs_chan_spec_scan;
- for_each_online_cpu(i)
- ret += relay_buf_full(*per_cpu_ptr(rc->buf, i));
+ for_each_possible_cpu(i) {
+ if ((buf = *per_cpu_ptr(rc->buf, i))) {
+ ret += relay_buf_full(buf);
+ }
+ }
- i = num_online_cpus();
-
- if (ret == i)
+ if (ret)
return 1;
else
return 0;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Smart <[email protected]>
[ Upstream commit b12740d316fa89f3f6191b71f986cf3b9383d379 ]
Another abort race: An io request is started, becomes active,
and is attempted to be started with the lldd. At the same time
the controller is stopped/torndown and an itterator is run to
abort the ios. As the io is active, it is added to the outstanding
aborted io count. However on the original io request thread, the
driver ends up rejecting the io due to the condition that induced
the controller teardown. The driver reject path didn't check whether
it was in the outstanding io count. This left the count outstanding
stopping controller teardown.
Correct by, in the driver reject case, setting the state to
inactive and checking whether it was in the outstanding io count.
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/fc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -2191,7 +2191,7 @@ nvme_fc_start_fcp_op(struct nvme_fc_ctrl
struct nvme_fc_cmd_iu *cmdiu = &op->cmd_iu;
struct nvme_command *sqe = &cmdiu->sqe;
u32 csn;
- int ret;
+ int ret, opstate;
/*
* before attempting to send the io, check to see if we believe
@@ -2269,6 +2269,9 @@ nvme_fc_start_fcp_op(struct nvme_fc_ctrl
queue->lldd_handle, &op->fcp_req);
if (ret) {
+ opstate = atomic_xchg(&op->state, FCPOP_STATE_COMPLETE);
+ __nvme_fc_fcpop_chk_teardowns(ctrl, op, opstate);
+
if (!(op->flags & FCOP_FLAGS_AEN))
nvme_fc_unmap_data(ctrl, op->rq, op);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fuyun Liang <[email protected]>
[ Upstream commit da44a00f06df1f823ea449065e79581ee624de4b ]
The return type of hns3_get_rss_indir_size is u32. But a negative value is
returned. This patch fixes it by replacing the negative value with zero.
Signed-off-by: Fuyun Liang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -709,7 +709,7 @@ static u32 hns3_get_rss_indir_size(struc
if (!h->ae_algo || !h->ae_algo->ops ||
!h->ae_algo->ops->get_rss_indir_size)
- return -EOPNOTSUPP;
+ return 0;
return h->ae_algo->ops->get_rss_indir_size(h);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 6958b027435aa54d82bbef09a007fd287f439977 ]
Fix a theoretical NULL pointer dereferencing in mt76x2_tx routine that
can occurs for injected frames in a monitor vif since vif pointer could
be NULL for that interfaces
Fixes: 23405236460b ("mt76: fix transmission of encrypted mgmt frames")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Acked-by: Felix Fietkau <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76x2_tx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_tx.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_tx.c
@@ -36,9 +36,12 @@ void mt76x2_tx(struct ieee80211_hw *hw,
msta = (struct mt76x2_sta *) control->sta->drv_priv;
wcid = &msta->wcid;
+ /* sw encrypted frames */
+ if (!info->control.hw_key && wcid->hw_key_idx != -1)
+ control->sta = NULL;
}
- if (vif || (!info->control.hw_key && wcid->hw_key_idx != -1)) {
+ if (vif && !control->sta) {
struct mt76x2_vif *mvif;
mvif = (struct mt76x2_vif *) vif->drv_priv;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fuyun Liang <[email protected]>
[ Upstream commit 3c8f5c0339515202e8662b6e3ae36a7b16610caf ]
Third parameter of hnae_set_field is shift, But a mask is given. This
patch fixes it by replacing HNS3_TXD_BDTYPE_M with HNS3_TXD_BDTYPE_S.
Signed-off-by: Fuyun Liang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -747,7 +747,7 @@ static void hns3_set_txbd_baseinfo(u16 *
{
/* Config bd buffer end */
hnae_set_field(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_BDTYPE_M,
- HNS3_TXD_BDTYPE_M, 0);
+ HNS3_TXD_BDTYPE_S, 0);
hnae_set_bit(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_FE_B, !!frag_end);
hnae_set_bit(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_VLD_B, 1);
hnae_set_field(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_SC_M, HNS3_TXD_SC_S, 0);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin <[email protected]>
[ Upstream commit d40b6768e45bd9213139b2d91d30c7692b6007b1 ]
system_reset_exception does most of its own crash handling now,
invoking the debugger or crash dumps if they are registered. If not,
then it goes through to die() to print stack traces, and then is
supposed to panic (according to comments).
However after die() prints oopses, it does its own handling which
doesn't allow system_reset_exception to panic (e.g., it may just
kill the current process). This patch causes sreset exceptions to
return from die after it prints messages but before acting.
This also stops die from invoking the debugger on 0x100 crashes.
system_reset_exception similarly calls the debugger. It had been
thought this was harmless (because if the debugger was disabled,
neither call would fire, and if it was enabled the first call
would return). However in some cases like xmon 'X' command, the
debugger returns 0, which currently causes it to be entered
again (first in system_reset_exception, then in die), which is
confusing.
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/traps.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -208,6 +208,12 @@ static void oops_end(unsigned long flags
}
raw_local_irq_restore(flags);
+ /*
+ * system_reset_excption handles debugger, crash dump, panic, for 0x100
+ */
+ if (TRAP(regs) == 0x100)
+ return;
+
crash_fadump(regs, "die oops");
if (kexec_should_crash(current))
@@ -272,8 +278,13 @@ void die(const char *str, struct pt_regs
{
unsigned long flags;
- if (debugger(regs))
- return;
+ /*
+ * system_reset_excption handles debugger, crash dump, panic, for 0x100
+ */
+ if (TRAP(regs) != 0x100) {
+ if (debugger(regs))
+ return;
+ }
flags = oops_begin(regs);
if (__die(str, regs, err))
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Khoroshilov <[email protected]>
[ Upstream commit d66e53649c18377edc08d48901e658e4fd491d46 ]
clk_disable_unprepare() was added to one error path,
but there is another one. The patch makes sure clk is
disabled at the both of them.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/davinci_wdt.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -236,15 +236,22 @@ static int davinci_wdt_probe(struct plat
wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
davinci_wdt->base = devm_ioremap_resource(dev, wdt_mem);
- if (IS_ERR(davinci_wdt->base))
- return PTR_ERR(davinci_wdt->base);
+ if (IS_ERR(davinci_wdt->base)) {
+ ret = PTR_ERR(davinci_wdt->base);
+ goto err_clk_disable;
+ }
ret = watchdog_register_device(wdd);
- if (ret < 0) {
- clk_disable_unprepare(davinci_wdt->clk);
+ if (ret) {
dev_err(dev, "cannot register watchdog device\n");
+ goto err_clk_disable;
}
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(davinci_wdt->clk);
+
return ret;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <[email protected]>
[ Upstream commit 0c29ba1b43df1eb7d8beb03fc929d2dac4c15f7e ]
The call to rmnet_get_endpoint can potentially return NULL so check
for this to avoid any subsequent null pointer dereferences on a NULL
ep.
Detected by CoverityScan, CID#1465385 ("Dereference null return value")
Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -307,6 +307,8 @@ static int rmnet_changelink(struct net_d
if (data[IFLA_VLAN_ID]) {
mux_id = nla_get_u16(data[IFLA_VLAN_ID]);
ep = rmnet_get_endpoint(port, priv->mux_id);
+ if (!ep)
+ return -ENODEV;
hlist_del_init_rcu(&ep->hlnode);
hlist_add_head_rcu(&ep->hlnode, &port->muxed_ep[mux_id]);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <[email protected]>
[ Upstream commit 60d6e6f0b9e422dd01aeda39257ee0428e5e2a3f ]
bgmac_dma_tx_ring_free() assigns the ctl1 word which is a litle endian
32-bit word without using proper accessors, fix this, and because a
length cannot be negative, use unsigned int while at it.
Fixes: 9cde94506eac ("bgmac: implement scatter/gather support")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bgmac.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -533,7 +533,8 @@ static void bgmac_dma_tx_ring_free(struc
int i;
for (i = 0; i < BGMAC_TX_RING_SLOTS; i++) {
- int len = dma_desc[i].ctl1 & BGMAC_DESC_CTL1_LEN;
+ u32 ctl1 = le32_to_cpu(dma_desc[i].ctl1);
+ unsigned int len = ctl1 & BGMAC_DESC_CTL1_LEN;
slot = &ring->slots[i];
dev_kfree_skb(slot->skb);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Graf <[email protected]>
[ Upstream commit 92571a1aae40d291158d16e7142637908220f470 ]
When using wicked with a lan78xx device attached to the system, we
end up with ethtool commands issued on the device before an ifup
got issued. That lead to the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000039c
pgd = ffff800035b30000
[0000039c] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
Modules linked in: [...]
Supported: Yes
CPU: 3 PID: 638 Comm: wickedd Tainted: G E 4.12.14-0-default #1
Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018
task: ffff800035e74180 task.stack: ffff800036718000
PC is at phy_ethtool_ksettings_get+0x20/0x98
LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
pc : [<ffff0000086f7f30>] lr : [<ffff000000dcca84>] pstate: 20000005
sp : ffff80003671bb20
x29: ffff80003671bb20 x28: ffff800035e74180
x27: ffff000008912000 x26: 000000000000001d
x25: 0000000000000124 x24: ffff000008f74d00
x23: 0000004000114809 x22: 0000000000000000
x21: ffff80003671bbd0 x20: 0000000000000000
x19: ffff80003671bbd0 x18: 000000000000040d
x17: 0000000000000001 x16: 0000000000000000
x15: 0000000000000000 x14: ffffffffffffffff
x13: 0000000000000000 x12: 0000000000000020
x11: 0101010101010101 x10: fefefefefefefeff
x9 : 7f7f7f7f7f7f7f7f x8 : fefefeff31677364
x7 : 0000000080808080 x6 : ffff80003671bc9c
x5 : ffff80003671b9f8 x4 : ffff80002c296190
x3 : 0000000000000000 x2 : 0000000000000000
x1 : ffff80003671bbd0 x0 : ffff80003671bc00
Process wickedd (pid: 638, stack limit = 0xffff800036718000)
Call trace:
Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20)
b9e0: ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000
ba00: ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080
ba20: fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101
ba40: 0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000
ba60: 0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0
ba80: 0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809
baa0: ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000
bac0: ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20
bae0: ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900
bb00: 0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30
[<ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98
[<ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
[<ffff0000087cbc40>] ethtool_get_settings+0x68/0x210
[<ffff0000087cc0d4>] dev_ethtool+0x214/0x2180
[<ffff0000087e5008>] dev_ioctl+0x400/0x630
[<ffff00000879dd00>] sock_do_ioctl+0x70/0x88
[<ffff00000879f5f8>] sock_ioctl+0x208/0x368
[<ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848
[<ffff0000082ce634>] SyS_ioctl+0x8c/0xa8
Exception stack(0xffff80003671bec0 to 0xffff80003671c000)
bec0: 0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465
bee0: 0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465
bf00: 000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f
bf20: 0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68
bf40: 0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0
bf60: 0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000
bf80: 0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00
bfa0: 0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0
bfc0: 0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d
bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
The culprit is quite simple: The driver tries to access the phy left and right,
but only actually has a working reference to it when the device is up.
The fix thus is quite simple too: Get a reference to the phy on probe already
and keep it even when the device is going down.
With this patch applied, I can successfully run wicked on my system and bring
the interface up and down as many times as I want, without getting NULL pointer
dereferences in between.
Signed-off-by: Alexander Graf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/lan78xx.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2083,10 +2083,6 @@ static int lan78xx_phy_init(struct lan78
dev->fc_autoneg = phydev->autoneg;
- phy_start(phydev);
-
- netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
-
return 0;
error:
@@ -2523,9 +2519,9 @@ static int lan78xx_open(struct net_devic
if (ret < 0)
goto done;
- ret = lan78xx_phy_init(dev);
- if (ret < 0)
- goto done;
+ phy_start(net->phydev);
+
+ netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
/* for Link Check */
if (dev->urb_intr) {
@@ -2586,13 +2582,8 @@ static int lan78xx_stop(struct net_devic
if (timer_pending(&dev->stat_monitor))
del_timer_sync(&dev->stat_monitor);
- phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
- phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
-
- phy_stop(net->phydev);
- phy_disconnect(net->phydev);
-
- net->phydev = NULL;
+ if (net->phydev)
+ phy_stop(net->phydev);
clear_bit(EVENT_DEV_OPEN, &dev->flags);
netif_stop_queue(net);
@@ -3507,8 +3498,13 @@ static void lan78xx_disconnect(struct us
return;
udev = interface_to_usbdev(intf);
-
net = dev->net;
+
+ phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
+ phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
+
+ phy_disconnect(net->phydev);
+
unregister_netdev(net);
cancel_delayed_work_sync(&dev->wq);
@@ -3664,8 +3660,14 @@ static int lan78xx_probe(struct usb_inte
pm_runtime_set_autosuspend_delay(&udev->dev,
DEFAULT_AUTOSUSPEND_DELAY);
+ ret = lan78xx_phy_init(dev);
+ if (ret < 0)
+ goto out4;
+
return 0;
+out4:
+ unregister_netdev(netdev);
out3:
lan78xx_unbind(dev, intf);
out2:
@@ -4013,7 +4015,7 @@ static int lan78xx_reset_resume(struct u
lan78xx_reset(dev);
- lan78xx_phy_init(dev);
+ phy_start(dev->net->phydev);
return lan78xx_resume(intf);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
[ Upstream commit 0e5b09b165510e2ea5c526e962c4edadd849ef4c ]
We're freeing "value_name" which is NULL, so that's a no-op, but we
intended to free "location_name" instead. And then we don't free the
names in token_location_attrs[0] and token_value_attrs[0].
Fixes: 33b9ca1e53b4 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/dell-smbios-base.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/platform/x86/dell-smbios-base.c
+++ b/drivers/platform/x86/dell-smbios-base.c
@@ -514,7 +514,7 @@ static int build_tokens_sysfs(struct pla
continue;
loop_fail_create_value:
- kfree(value_name);
+ kfree(location_name);
goto out_unwind_strings;
}
smbios_attribute_group.attrs = token_attrs;
@@ -525,7 +525,7 @@ loop_fail_create_value:
return 0;
out_unwind_strings:
- for (i = i-1; i > 0; i--) {
+ while (i--) {
kfree(token_location_attrs[i].attr.name);
kfree(token_value_attrs[i].attr.name);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kan Liang <[email protected]>
[ Upstream commit f58385f629c87a9e210108b39c1f4950d0363ad2 ]
There is a segmentation fault when running 'perf trace'. For example:
[root@jouet e]# perf trace -e *chdir -o /tmp/bla perf report --ignore-vmlinux -i ../perf.data
The perf_mmap__consume() could unmap the mmap. It needs to check the
refcnt in perf_mmap__read_done().
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: ee023de05f35 ("perf mmap: Introduce perf_mmap__read_done()")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/mmap.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/tools/perf/util/mmap.c
+++ b/tools/perf/util/mmap.c
@@ -344,5 +344,11 @@ out:
*/
void perf_mmap__read_done(struct perf_mmap *map)
{
+ /*
+ * Check if event was unmapped due to a POLLHUP/POLLERR.
+ */
+ if (!refcount_read(&map->refcnt))
+ return;
+
map->prev = perf_mmap__read_head(map);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrea Parri <[email protected]>
[ Upstream commit 0123f4d76ca63b7b895f40089be0ce4809e392d8 ]
Current implementations map locking operations using .rl and .aq
annotations. However, this mapping is unsound w.r.t. the kernel
memory consistency model (LKMM) [1]:
Referring to the "unlock-lock-read-ordering" test reported below,
Daniel wrote:
"I think an RCpc interpretation of .aq and .rl would in fact
allow the two normal loads in P1 to be reordered [...]
The intuition would be that the amoswap.w.aq can forward from
the amoswap.w.rl while that's still in the store buffer, and
then the lw x3,0(x4) can also perform while the amoswap.w.rl
is still in the store buffer, all before the l1 x1,0(x2)
executes. That's not forbidden unless the amoswaps are RCsc,
unless I'm missing something.
Likewise even if the unlock()/lock() is between two stores.
A control dependency might originate from the load part of
the amoswap.w.aq, but there still would have to be something
to ensure that this load part in fact performs after the store
part of the amoswap.w.rl performs globally, and that's not
automatic under RCpc."
Simulation of the RISC-V memory consistency model confirmed this
expectation.
In order to "synchronize" LKMM and RISC-V's implementation, this
commit strengthens the implementations of the locking operations
by replacing .rl and .aq with the use of ("lightweigth") fences,
resp., "fence rw, w" and "fence r , rw".
C unlock-lock-read-ordering
{}
/* s initially owned by P1 */
P0(int *x, int *y)
{
WRITE_ONCE(*x, 1);
smp_wmb();
WRITE_ONCE(*y, 1);
}
P1(int *x, int *y, spinlock_t *s)
{
int r0;
int r1;
r0 = READ_ONCE(*y);
spin_unlock(s);
spin_lock(s);
r1 = READ_ONCE(*x);
}
exists (1:r0=1 /\ 1:r1=0)
[1] https://marc.info/?l=linux-kernel&m=151930201102853&w=2
https://groups.google.com/a/groups.riscv.org/forum/#!topic/isa-dev/hKywNHBkAXM
https://marc.info/?l=linux-kernel&m=151633436614259&w=2
Signed-off-by: Andrea Parri <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Daniel Lustig <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: David Howells <[email protected]>
Cc: Jade Alglave <[email protected]>
Cc: Luc Maranget <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Akira Yokosawa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/include/asm/fence.h | 12 ++++++++++++
arch/riscv/include/asm/spinlock.h | 29 +++++++++++++++--------------
2 files changed, 27 insertions(+), 14 deletions(-)
create mode 100644 arch/riscv/include/asm/fence.h
--- /dev/null
+++ b/arch/riscv/include/asm/fence.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_RISCV_FENCE_H
+#define _ASM_RISCV_FENCE_H
+
+#ifdef CONFIG_SMP
+#define RISCV_ACQUIRE_BARRIER "\tfence r , rw\n"
+#define RISCV_RELEASE_BARRIER "\tfence rw, w\n"
+#else
+#define RISCV_ACQUIRE_BARRIER
+#define RISCV_RELEASE_BARRIER
+#endif
+
+#endif /* _ASM_RISCV_FENCE_H */
--- a/arch/riscv/include/asm/spinlock.h
+++ b/arch/riscv/include/asm/spinlock.h
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <asm/current.h>
+#include <asm/fence.h>
/*
* Simple spin lock operations. These provide no fairness guarantees.
@@ -28,10 +29,7 @@
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
- __asm__ __volatile__ (
- "amoswap.w.rl x0, x0, %0"
- : "=A" (lock->lock)
- :: "memory");
+ smp_store_release(&lock->lock, 0);
}
static inline int arch_spin_trylock(arch_spinlock_t *lock)
@@ -39,7 +37,8 @@ static inline int arch_spin_trylock(arch
int tmp = 1, busy;
__asm__ __volatile__ (
- "amoswap.w.aq %0, %2, %1"
+ " amoswap.w %0, %2, %1\n"
+ RISCV_ACQUIRE_BARRIER
: "=r" (busy), "+A" (lock->lock)
: "r" (tmp)
: "memory");
@@ -68,8 +67,9 @@ static inline void arch_read_lock(arch_r
"1: lr.w %1, %0\n"
" bltz %1, 1b\n"
" addi %1, %1, 1\n"
- " sc.w.aq %1, %1, %0\n"
+ " sc.w %1, %1, %0\n"
" bnez %1, 1b\n"
+ RISCV_ACQUIRE_BARRIER
: "+A" (lock->lock), "=&r" (tmp)
:: "memory");
}
@@ -82,8 +82,9 @@ static inline void arch_write_lock(arch_
"1: lr.w %1, %0\n"
" bnez %1, 1b\n"
" li %1, -1\n"
- " sc.w.aq %1, %1, %0\n"
+ " sc.w %1, %1, %0\n"
" bnez %1, 1b\n"
+ RISCV_ACQUIRE_BARRIER
: "+A" (lock->lock), "=&r" (tmp)
:: "memory");
}
@@ -96,8 +97,9 @@ static inline int arch_read_trylock(arch
"1: lr.w %1, %0\n"
" bltz %1, 1f\n"
" addi %1, %1, 1\n"
- " sc.w.aq %1, %1, %0\n"
+ " sc.w %1, %1, %0\n"
" bnez %1, 1b\n"
+ RISCV_ACQUIRE_BARRIER
"1:\n"
: "+A" (lock->lock), "=&r" (busy)
:: "memory");
@@ -113,8 +115,9 @@ static inline int arch_write_trylock(arc
"1: lr.w %1, %0\n"
" bnez %1, 1f\n"
" li %1, -1\n"
- " sc.w.aq %1, %1, %0\n"
+ " sc.w %1, %1, %0\n"
" bnez %1, 1b\n"
+ RISCV_ACQUIRE_BARRIER
"1:\n"
: "+A" (lock->lock), "=&r" (busy)
:: "memory");
@@ -125,7 +128,8 @@ static inline int arch_write_trylock(arc
static inline void arch_read_unlock(arch_rwlock_t *lock)
{
__asm__ __volatile__(
- "amoadd.w.rl x0, %1, %0"
+ RISCV_RELEASE_BARRIER
+ " amoadd.w x0, %1, %0\n"
: "+A" (lock->lock)
: "r" (-1)
: "memory");
@@ -133,10 +137,7 @@ static inline void arch_read_unlock(arch
static inline void arch_write_unlock(arch_rwlock_t *lock)
{
- __asm__ __volatile__ (
- "amoswap.w.rl x0, x0, %0"
- : "=A" (lock->lock)
- :: "memory");
+ smp_store_release(&lock->lock, 0);
}
#endif /* _ASM_RISCV_SPINLOCK_H */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <[email protected]>
[ Upstream commit 16a1c0646e55c3345bce8e4edfc06ad119d27c04 ]
All the members: base, idm_base and nicpm_base should be annotated with
__iomem since they are pointers to register space. This fixes a bunch of
sparse reported warnings.
Fixes: f6a95a24957a ("net: ethernet: bgmac: Add platform device support")
Fixes: dd5c5d037f5e ("net: ethernet: bgmac: add NS2 support")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bgmac.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -479,9 +479,9 @@ struct bgmac_rx_header {
struct bgmac {
union {
struct {
- void *base;
- void *idm_base;
- void *nicpm_base;
+ void __iomem *base;
+ void __iomem *idm_base;
+ void __iomem *nicpm_base;
} plat;
struct {
struct bcma_device *core;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eran Ben Elisha <[email protected]>
[ Upstream commit bfc647d52e67dc756c605e9a50d45b71054c2533 ]
Driver callback for handling TX timeout should access some internal
resources (SQ, CQ) in order to decide if the tx timeout work should be
scheduled. These resources might be unavailable if channels are closed
in parallel (ifdown for example).
The state lock is the mechanism to protect from such races.
Move all TX timeout logic to be in the work under a state lock.
In addition, Move the work from the global WQ to mlx5e WQ to make sure
this work is flushed when device is detached..
Also, move the mlx5e_tx_timeout_work code to be next to the TX timeout
NDO for better code locality.
Fixes: 3947ca185999 ("net/mlx5e: Implement ndo_tx_timeout callback")
Signed-off-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 61 ++++++++++++----------
1 file changed, 34 insertions(+), 27 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -153,26 +153,6 @@ static void mlx5e_update_carrier_work(st
mutex_unlock(&priv->state_lock);
}
-static void mlx5e_tx_timeout_work(struct work_struct *work)
-{
- struct mlx5e_priv *priv = container_of(work, struct mlx5e_priv,
- tx_timeout_work);
- int err;
-
- rtnl_lock();
- mutex_lock(&priv->state_lock);
- if (!test_bit(MLX5E_STATE_OPENED, &priv->state))
- goto unlock;
- mlx5e_close_locked(priv->netdev);
- err = mlx5e_open_locked(priv->netdev);
- if (err)
- netdev_err(priv->netdev, "mlx5e_open_locked failed recovering from a tx_timeout, err(%d).\n",
- err);
-unlock:
- mutex_unlock(&priv->state_lock);
- rtnl_unlock();
-}
-
void mlx5e_update_stats(struct mlx5e_priv *priv)
{
int i;
@@ -3632,13 +3612,19 @@ static bool mlx5e_tx_timeout_eq_recover(
return true;
}
-static void mlx5e_tx_timeout(struct net_device *dev)
+static void mlx5e_tx_timeout_work(struct work_struct *work)
{
- struct mlx5e_priv *priv = netdev_priv(dev);
+ struct mlx5e_priv *priv = container_of(work, struct mlx5e_priv,
+ tx_timeout_work);
+ struct net_device *dev = priv->netdev;
bool reopen_channels = false;
- int i;
+ int i, err;
- netdev_err(dev, "TX timeout detected\n");
+ rtnl_lock();
+ mutex_lock(&priv->state_lock);
+
+ if (!test_bit(MLX5E_STATE_OPENED, &priv->state))
+ goto unlock;
for (i = 0; i < priv->channels.num * priv->channels.params.num_tc; i++) {
struct netdev_queue *dev_queue = netdev_get_tx_queue(dev, i);
@@ -3646,7 +3632,9 @@ static void mlx5e_tx_timeout(struct net_
if (!netif_xmit_stopped(dev_queue))
continue;
- netdev_err(dev, "TX timeout on queue: %d, SQ: 0x%x, CQ: 0x%x, SQ Cons: 0x%x SQ Prod: 0x%x, usecs since last trans: %u\n",
+
+ netdev_err(dev,
+ "TX timeout on queue: %d, SQ: 0x%x, CQ: 0x%x, SQ Cons: 0x%x SQ Prod: 0x%x, usecs since last trans: %u\n",
i, sq->sqn, sq->cq.mcq.cqn, sq->cc, sq->pc,
jiffies_to_usecs(jiffies - dev_queue->trans_start));
@@ -3659,8 +3647,27 @@ static void mlx5e_tx_timeout(struct net_
}
}
- if (reopen_channels && test_bit(MLX5E_STATE_OPENED, &priv->state))
- schedule_work(&priv->tx_timeout_work);
+ if (!reopen_channels)
+ goto unlock;
+
+ mlx5e_close_locked(dev);
+ err = mlx5e_open_locked(dev);
+ if (err)
+ netdev_err(priv->netdev,
+ "mlx5e_open_locked failed recovering from a tx_timeout, err(%d).\n",
+ err);
+
+unlock:
+ mutex_unlock(&priv->state_lock);
+ rtnl_unlock();
+}
+
+static void mlx5e_tx_timeout(struct net_device *dev)
+{
+ struct mlx5e_priv *priv = netdev_priv(dev);
+
+ netdev_err(dev, "TX timeout detected\n");
+ queue_work(priv->wq, &priv->tx_timeout_work);
}
static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luca Coelho <[email protected]>
[ Upstream commit 9a233bb8025105db9a60b5d761005cc5a6c77f3d ]
Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue ==
IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF)
which is way too large for the u16 we used to store it in
hw_queue_to_mac820211. If this happens the following UBSAN warning
will be generated:
[ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5
[ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int'
Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and,
while at it, add a warning if the queue number is larger than
IEEE80211_MAX_QUEUES.
Fixes: 34e10860ae8d ("iwlwifi: mvm: remove references to queue_info in new TX path")
Reported-by: Paul Menzel <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
@@ -800,12 +800,19 @@ int iwl_mvm_disable_txq(struct iwl_mvm *
.scd_queue = queue,
.action = SCD_CFG_DISABLE_QUEUE,
};
- bool remove_mac_queue = true;
+ bool remove_mac_queue = mac80211_queue != IEEE80211_INVAL_HW_QUEUE;
int ret;
+ if (WARN_ON(remove_mac_queue && mac80211_queue >= IEEE80211_MAX_QUEUES))
+ return -EINVAL;
+
if (iwl_mvm_has_new_tx_api(mvm)) {
spin_lock_bh(&mvm->queue_info_lock);
- mvm->hw_queue_to_mac80211[queue] &= ~BIT(mac80211_queue);
+
+ if (remove_mac_queue)
+ mvm->hw_queue_to_mac80211[queue] &=
+ ~BIT(mac80211_queue);
+
spin_unlock_bh(&mvm->queue_info_lock);
iwl_trans_txq_free(mvm->trans, queue);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior <[email protected]>
[ Upstream commit 39ffe39545cd5cb5b8cee9f0469165cf24dc62c2 ]
find_dev_data() does not check whether the return value alloc_dev_data()
is NULL. This was okay once because the pointer was returned once as-is.
Since commit df3f7a6e8e85 ("iommu/amd: Use is_attach_deferred
call-back") the pointer may be used within find_dev_data() so a NULL
check is required.
Cc: Baoquan He <[email protected]>
Fixes: df3f7a6e8e85 ("iommu/amd: Use is_attach_deferred call-back")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/amd_iommu.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -310,6 +310,8 @@ static struct iommu_dev_data *find_dev_d
if (dev_data == NULL) {
dev_data = alloc_dev_data(devid);
+ if (!dev_data)
+ return NULL;
if (translation_pre_enabled(iommu))
dev_data->defer_attach = true;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sara Sharon <[email protected]>
[ Upstream commit f4f155e5ec04d381b2f0870817d93dbdc259aa63 ]
RCU isn't properly locked.
Fixes: 46d372af9935 ("iwlwifi: mvm: rs: new rate scale API - add FW notifications")
Signed-off-by: Sara Sharon <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
@@ -234,13 +234,15 @@ void iwl_mvm_tlc_update_notif(struct iwl
struct iwl_mvm_sta *mvmsta;
struct iwl_lq_sta_rs_fw *lq_sta;
+ rcu_read_lock();
+
notif = (void *)pkt->data;
mvmsta = iwl_mvm_sta_from_staid_rcu(mvm, notif->sta_id);
if (!mvmsta) {
IWL_ERR(mvm, "Invalid sta id (%d) in FW TLC notification\n",
notif->sta_id);
- return;
+ goto out;
}
lq_sta = &mvmsta->lq_sta.rs_fw;
@@ -251,6 +253,8 @@ void iwl_mvm_tlc_update_notif(struct iwl
IWL_DEBUG_RATE(mvm, "new rate_n_flags: 0x%X\n",
lq_sta->last_rate_n_flags);
}
+out:
+ rcu_read_unlock();
}
void rs_fw_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <[email protected]>
[ Upstream commit 9ad577087165478c9d9be82b15ed9bf2db5835f5 ]
Since commit 8edc514b01e9 ("intel_th: Make SOURCE devices children of the
root device") the hub is not the parent of SOURCE devices any more, so the
new helper function should be used for that instead of always using the
parent. The intel_th_set_output() path, however, still uses the old
logic, leading to the hub driver structure being aliased with something
else, like struct pci_driver or struct acpi_driver, and an incorrect call
to an address inferred from that, potentially resulting in a crash.
Fixes: 8edc514b01e9 ("intel_th: Make SOURCE devices children of the root device")
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hwtracing/intel_th/core.c
+++ b/drivers/hwtracing/intel_th/core.c
@@ -935,7 +935,7 @@ EXPORT_SYMBOL_GPL(intel_th_trace_disable
int intel_th_set_output(struct intel_th_device *thdev,
unsigned int master)
{
- struct intel_th_device *hub = to_intel_th_device(thdev->dev.parent);
+ struct intel_th_device *hub = to_intel_th_hub(thdev);
struct intel_th_driver *hubdrv = to_intel_th_driver(hub->dev.driver);
if (!hubdrv->set_output)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Harry Morris <[email protected]>
[ Upstream commit 86674a97f5055f4c7f406563408096e8cf9364ff ]
In ca8210_test_int_user_write() a user can request the transfer of a
frame with a length field (command.length) that is longer than the
actual buffer provided (len). In this scenario the driver will copy
the buffer contents into the uninitialised command[] buffer, then
transfer <data.length> bytes over the SPI even though only <len> bytes
had been populated, potentially leaking sensitive kernel memory.
Also the first 6 bytes of the command buffer must be initialised in case
a malformed, short packet is written and the uninitialised bytes are
read in ca8210_test_check_upstream.
Reported-by: Domen Puncer Kugler <[email protected]>
Signed-off-by: Harry Morris <[email protected]>
Tested-by: Harry Morris <[email protected]>
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ieee802154/ca8210.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -2493,13 +2493,14 @@ static ssize_t ca8210_test_int_user_writ
struct ca8210_priv *priv = filp->private_data;
u8 command[CA8210_SPI_BUF_SIZE];
- if (len > CA8210_SPI_BUF_SIZE) {
+ memset(command, SPI_IDLE, 6);
+ if (len > CA8210_SPI_BUF_SIZE || len < 2) {
dev_warn(
&priv->spi->dev,
- "userspace requested erroneously long write (%zu)\n",
+ "userspace requested erroneous write length (%zu)\n",
len
);
- return -EMSGSIZE;
+ return -EBADE;
}
ret = copy_from_user(command, in_buf, len);
@@ -2511,6 +2512,13 @@ static ssize_t ca8210_test_int_user_writ
);
return -EIO;
}
+ if (len != command[1] + 2) {
+ dev_err(
+ &priv->spi->dev,
+ "write len does not match packet length field\n"
+ );
+ return -EBADE;
+ }
ret = ca8210_test_check_upstream(command, priv->spi);
if (ret == 0) {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lenny Szubowicz <[email protected]>
[ Upstream commit 8b29d29abc484d638213dd79a18a95ae7e5bb402 ]
Fix once per second (round_robin_time) memory leak of about 1 KB in
each acpi_pad kernel idling thread that is activated.
Found by testing with kmemleak.
Signed-off-by: Lenny Szubowicz <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpi_pad.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -110,6 +110,7 @@ static void round_robin_cpu(unsigned int
cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
if (cpumask_empty(tmp)) {
mutex_unlock(&round_robin_lock);
+ free_cpumask_var(tmp);
return;
}
for_each_cpu(cpu, tmp) {
@@ -127,6 +128,8 @@ static void round_robin_cpu(unsigned int
mutex_unlock(&round_robin_lock);
set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
+
+ free_cpumask_var(tmp);
}
static void exit_round_robin(unsigned int tsk_index)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
[ Upstream commit c37a3c94775855567b90f91775b9691e10bd2806 ]
If acpi_id is == nr_acpi_bits, then we access one element beyond the end
of the acpi_psd[] array or we set one bit beyond the end of the bit map
when we do __set_bit(acpi_id, acpi_id_present);
Fixes: 59a568029181 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Joao Martins <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/xen-acpi-processor.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/xen/xen-acpi-processor.c
+++ b/drivers/xen/xen-acpi-processor.c
@@ -362,9 +362,9 @@ read_acpi_id(acpi_handle handle, u32 lvl
}
/* There are more ACPI Processor objects than in x2APIC or MADT.
* This can happen with incorrect ACPI SSDT declerations. */
- if (acpi_id > nr_acpi_bits) {
- pr_debug("We only have %u, trying to set %u\n",
- nr_acpi_bits, acpi_id);
+ if (acpi_id >= nr_acpi_bits) {
+ pr_debug("max acpi id %u, trying to set %u\n",
+ nr_acpi_bits - 1, acpi_id);
return AE_OK;
}
/* OK, There is a ACPI Processor object */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 73dcc666d6bd0db56cd556010f93d8f04c1cc70c ]
If serial console wake-up is enabled ("echo enabled >
/sys/.../ttySC0/power/wakeup"), and any serial input is received while
the system is suspended, serial port input no longer works after system
resume.
Note that:
1) The system can still be woken up using the serial console,
2) Serial port input keeps working if the system is woken up in some
other way (e.g. Wake-on-LAN or gpio-keys), and no serial input was
received while suspended.
To fix this, replace SET_LATE_SYSTEM_SLEEP_PM_OPS() by
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(), as the callbacks installed by the
former happen too early resp. late in the suspend resp. resume process.
Reported-by: RVC test team via Yoshihiro Shimoda <[email protected]>
Fixes: 1131b0a4af911de5 ("dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/sh/rcar-dmac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1677,8 +1677,8 @@ static const struct dev_pm_ops rcar_dmac
* - Wait for the current transfer to complete and stop the device,
* - Resume transfers, if any.
*/
- SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
- pm_runtime_force_resume)
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(rcar_dmac_runtime_suspend, rcar_dmac_runtime_resume,
NULL)
};
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Ungerer <[email protected]>
[ Upstream commit f61e64310b75733d782e930d1fb404b84699eed6 ]
As of commit 205e1b7f51e4 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from 41833dd8:
41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
[<40025534>] 0x40025534
[<4004e514>] 0x4004e514
[<400255de>] 0x400255de
[<40159e20>] 0x40159e20
[<40159e20>] 0x40159e20
It is not fatal, the driver and the system continue to function normally.
As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/m68k/coldfire/device.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/arch/m68k/coldfire/device.c
+++ b/arch/m68k/coldfire/device.c
@@ -135,7 +135,11 @@ static struct platform_device mcf_fec0 =
.id = 0,
.num_resources = ARRAY_SIZE(mcf_fec0_resources),
.resource = mcf_fec0_resources,
- .dev.platform_data = FEC_PDATA,
+ .dev = {
+ .dma_mask = &mcf_fec0.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = FEC_PDATA,
+ }
};
#ifdef MCFFEC_BASE1
@@ -167,7 +171,11 @@ static struct platform_device mcf_fec1 =
.id = 1,
.num_resources = ARRAY_SIZE(mcf_fec1_resources),
.resource = mcf_fec1_resources,
- .dev.platform_data = FEC_PDATA,
+ .dev = {
+ .dma_mask = &mcf_fec1.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = FEC_PDATA,
+ }
};
#endif /* MCFFEC_BASE1 */
#endif /* CONFIG_FEC */
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
[ Upstream commit 8434ec46c6e3232cebc25a910363b29f5c617820 ]
When logging an inode, at tree-log.c:copy_items(), if we call
btrfs_next_leaf() at the loop which checks for the need to log holes, we
need to make sure copy_items() returns the value 1 to its caller and
not 0 (on success). This is because the path the caller passed was
released and is now different from what is was before, and the caller
expects a return value of 0 to mean both success and that the path
has not changed, while a return value of 1 means both success and
signals the caller that it can not reuse the path, it has to perform
another tree search.
Even though this is a case that should not be triggered on normal
circumstances or very rare at least, its consequences can be very
unpredictable (especially when replaying a log tree).
Fixes: 16e7549f045d ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -4005,6 +4005,7 @@ fill_holes:
ASSERT(ret == 0);
src = src_path->nodes[0];
i = 0;
+ need_find_last_extent = true;
}
btrfs_item_key_to_cpu(src, &key, i);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaro Koskinen <[email protected]>
[ Upstream commit e283655b5abe26462d53d5196f186c5e8863af3b ]
We should zero an array using sizeof instead of number of elements.
Fixes the following compiler (GCC 7.3.0) warnings:
drivers/macintosh/rack-meter.c: In function 'rackmeter_do_pause':
drivers/macintosh/rack-meter.c:157:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
drivers/macintosh/rack-meter.c:158:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
Fixes: 4f7bef7a9f69 ("drivers: macintosh: rack-meter: fix bogus memsets")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/macintosh/rack-meter.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -154,8 +154,8 @@ static void rackmeter_do_pause(struct ra
DBDMA_DO_STOP(rm->dma_regs);
return;
}
- memset(rdma->buf1, 0, ARRAY_SIZE(rdma->buf1));
- memset(rdma->buf2, 0, ARRAY_SIZE(rdma->buf2));
+ memset(rdma->buf1, 0, sizeof(rdma->buf1));
+ memset(rdma->buf2, 0, sizeof(rdma->buf2));
rm->dma_buf_v->mark = 0;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 57b0c9d49b94bbeb53649b7fbd264603c1ebd585 ]
If a call-level abort is received for the previous call to complete on a
connection channel, then that abort is queued for the connection processor
to handle. Unfortunately, the connection processor then assumes without
checking that the abort is connection-level (ie. callNumber is 0) and
distributes it over all active calls on that connection, thereby
incorrectly aborting them.
Fix this by discarding aborts aimed at a completed call.
Further, discard all packets aimed at a call that's complete if there's
currently an active call on a channel, since the DATA packets associated
with the new call automatically terminate the old call.
Fixes: 18bfeba50dfd ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor")
Reported-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/input.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -1240,16 +1240,19 @@ void rxrpc_data_ready(struct sock *udp_s
goto discard_unlock;
if (sp->hdr.callNumber == chan->last_call) {
- /* For the previous service call, if completed successfully, we
- * discard all further packets.
+ if (chan->call ||
+ sp->hdr.type == RXRPC_PACKET_TYPE_ABORT)
+ goto discard_unlock;
+
+ /* For the previous service call, if completed
+ * successfully, we discard all further packets.
*/
if (rxrpc_conn_is_service(conn) &&
- (chan->last_type == RXRPC_PACKET_TYPE_ACK ||
- sp->hdr.type == RXRPC_PACKET_TYPE_ABORT))
+ chan->last_type == RXRPC_PACKET_TYPE_ACK)
goto discard_unlock;
- /* But otherwise we need to retransmit the final packet from
- * data cached in the connection record.
+ /* But otherwise we need to retransmit the final packet
+ * from data cached in the connection record.
*/
rxrpc_post_packet_to_conn(conn, skb);
goto out_unlock;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit 59299aa1028fce051adbd25aaff7c387b865cd6d ]
Commit a158bdd3 ("rxrpc: Fix call timeouts") reworked the time calculation
for the next resend event. For this calculation, "oldest" will be before
"now", so ktime_sub(oldest, now) will yield a negative value. When passed
to nsecs_to_jiffies which expects an unsigned value, the end result will be
a very large value, and a resend event scheduled far into the future. This
could cause calls to stall if some packets were lost.
Fix by ordering the arguments to ktime_sub correctly.
Fixes: a158bdd3247b ("rxrpc: Fix call timeouts")
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/call_event.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/rxrpc/call_event.c
+++ b/net/rxrpc/call_event.c
@@ -225,7 +225,7 @@ static void rxrpc_resend(struct rxrpc_ca
ktime_to_ns(ktime_sub(skb->tstamp, max_age)));
}
- resend_at = nsecs_to_jiffies(ktime_to_ns(ktime_sub(oldest, now)));
+ resend_at = nsecs_to_jiffies(ktime_to_ns(ktime_sub(now, oldest)));
resend_at += jiffies + rxrpc_resend_timeout;
WRITE_ONCE(call->resend_at, resend_at);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Mahoney <[email protected]>
[ Upstream commit 8a5a916d9a35e13576d79cc16e24611821b13e34 ]
While running btrfs/011, I hit the following lockdep splat.
This is the important bit:
pcpu_alloc+0x1ac/0x5e0
__percpu_counter_init+0x4e/0xb0
btrfs_init_fs_root+0x99/0x1c0 [btrfs]
btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
resolve_indirect_refs+0x130/0x830 [btrfs]
find_parent_nodes+0x69e/0xff0 [btrfs]
btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
btrfs_find_all_roots+0x50/0x70 [btrfs]
btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
The percpu_counter_init call in btrfs_alloc_subvolume_writers
uses GFP_KERNEL, which we can't do during transaction commit.
This switches it to GFP_NOFS.
========================================================
WARNING: possible irq lock inversion dependency detected
4.12.14-kvmsmall #8 Tainted: G W
--------------------------------------------------------
kswapd0/50 just changed the state of lock:
(&delayed_node->mutex){+.+.-.}, at: [<ffffffffc06994fa>] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
but this lock took another, RECLAIM_FS-unsafe lock in the past:
(pcpu_alloc_mutex){+.+.+.}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> &found->groups_sem --> pcpu_alloc_mutex
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pcpu_alloc_mutex);
local_irq_disable();
lock(&delayed_node->mutex);
lock(&found->groups_sem);
<Interrupt>
lock(&delayed_node->mutex);
*** DEADLOCK ***
2 locks held by kswapd0/50:
#0: (shrinker_rwsem){++++..}, at: [<ffffffff811dc11f>] shrink_slab+0x7f/0x5b0
#1: (&type->s_umount_key#30){+++++.}, at: [<ffffffff8126dec6>] trylock_super+0x16/0x50
the shortest dependencies between 2nd lock and 1st lock:
-> (pcpu_alloc_mutex){+.+.+.} ops: 4904 {
HARDIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
kmem_cache_init_late+0x42/0x75
start_kernel+0x343/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
SOFTIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
kmem_cache_init_late+0x42/0x75
start_kernel+0x343/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
RECLAIM_FS-ON-W at:
__kmalloc+0x47/0x310
pcpu_extend_area_map+0x2b/0xc0
pcpu_alloc+0x3ec/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
__kmem_cache_create+0x1bf/0x390
create_cache+0xba/0x1b0
kmem_cache_create+0x1f8/0x2b0
ksm_init+0x6f/0x19d
do_one_initcall+0x50/0x1b0
kernel_init_freeable+0x201/0x289
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
INITIAL USE at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
setup_cpu_cache+0x2f/0x1f0
__kmem_cache_create+0x1bf/0x390
create_boot_cache+0x8b/0xb1
kmem_cache_init+0xa1/0x19e
start_kernel+0x270/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
}
... key at: [<ffffffff821d8e70>] pcpu_alloc_mutex+0x70/0xa0
... acquired at:
pcpu_alloc+0x1ac/0x5e0
__percpu_counter_init+0x4e/0xb0
btrfs_init_fs_root+0x99/0x1c0 [btrfs]
btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
resolve_indirect_refs+0x130/0x830 [btrfs]
find_parent_nodes+0x69e/0xff0 [btrfs]
btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
btrfs_find_all_roots+0x50/0x70 [btrfs]
btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
transaction_kthread+0x176/0x1b0 [btrfs]
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
-> (&fs_info->commit_root_sem){++++..} ops: 1566382 {
HARDIRQ-ON-W at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
HARDIRQ-ON-R at:
down_read+0x35/0x90
caching_thread+0x57/0x560 [btrfs]
normal_work_helper+0x1c0/0x5e0 [btrfs]
process_one_work+0x1e0/0x5c0
worker_thread+0x44/0x390
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
SOFTIRQ-ON-W at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-R at:
down_read+0x35/0x90
caching_thread+0x57/0x560 [btrfs]
normal_work_helper+0x1c0/0x5e0 [btrfs]
process_one_work+0x1e0/0x5c0
worker_thread+0x44/0x390
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
INITIAL USE at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<ffffffffc0729578>] __key.61970+0x0/0xfffffffffff9aa88 [btrfs]
... acquired at:
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
btrfs_create_tree+0xbb/0x2a0 [btrfs]
btrfs_create_uuid_tree+0x37/0x140 [btrfs]
open_ctree+0x23c0/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> (&found->groups_sem){++++..} ops: 2134587 {
HARDIRQ-ON-W at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
HARDIRQ-ON-R at:
down_read+0x35/0x90
btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
open_ctree+0x207b/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-W at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-R at:
down_read+0x35/0x90
btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
open_ctree+0x207b/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
INITIAL USE at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<ffffffffc0729488>] __key.59101+0x0/0xfffffffffff9ab78 [btrfs]
... acquired at:
find_free_extent+0xcb4/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
__btrfs_cow_block+0x110/0x5b0 [btrfs]
btrfs_cow_block+0xd7/0x290 [btrfs]
btrfs_search_slot+0x1f6/0x960 [btrfs]
btrfs_lookup_inode+0x2a/0x90 [btrfs]
__btrfs_update_delayed_inode+0x65/0x210 [btrfs]
btrfs_commit_inode_delayed_inode+0x121/0x130 [btrfs]
btrfs_evict_inode+0x3fe/0x6a0 [btrfs]
evict+0xc4/0x190
__dentry_kill+0xbf/0x170
dput+0x2ae/0x2f0
SyS_rename+0x2a6/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> (&delayed_node->mutex){+.+.-.} ops: 5580204 {
HARDIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
IN-RECLAIM_FS-W at:
__mutex_lock+0x4e/0x8c0
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
INITIAL USE at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<ffffffffc072d488>] __key.56935+0x0/0xfffffffffff96b78 [btrfs]
... acquired at:
__lock_acquire+0x264/0x11c0
lock_acquire+0xbd/0x1e0
__mutex_lock+0x4e/0x8c0
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
stack backtrace:
CPU: 1 PID: 50 Comm: kswapd0 Tainted: G W 4.12.14-kvmsmall #8 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x78/0xb7
print_irq_inversion_bug.part.38+0x19f/0x1aa
check_usage_forwards+0x102/0x120
? ret_from_fork+0x3a/0x50
? check_usage_backwards+0x110/0x110
mark_lock+0x16c/0x270
__lock_acquire+0x264/0x11c0
? pagevec_lookup_entries+0x1a/0x30
? truncate_inode_pages_range+0x2b3/0x7f0
lock_acquire+0xbd/0x1e0
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
__mutex_lock+0x4e/0x8c0
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
? btrfs_evict_inode+0x1f6/0x6a0 [btrfs]
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
? mem_cgroup_shrink_node+0x2c0/0x2c0
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x3a/0x50
Signed-off-by: Jeff Mahoney <[email protected]>
Reviewed-by: Liu Bo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/disk-io.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1108,7 +1108,7 @@ static struct btrfs_subvolume_writers *b
if (!writers)
return ERR_PTR(-ENOMEM);
- ret = percpu_counter_init(&writers->counter, 0, GFP_KERNEL);
+ ret = percpu_counter_init(&writers->counter, 0, GFP_NOFS);
if (ret < 0) {
kfree(writers);
return ERR_PTR(ret);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 03877bf6a30cca7d4bc3ffabd3c3e9464a7a1a19 ]
rxrpc calls have a ring of packets that are awaiting ACK or retransmission
and a parallel ring of annotations that tracks the state of those packets.
If the initial transmission of a packet on the underlying UDP socket fails
then the packet annotation is marked for resend - but the setting of this
mark accidentally erases the last-packet mark also stored in the same
annotation slot. If this happens, a call won't switch out of the Tx phase
when all the packets have been transmitted.
Fix this by retaining the last-packet mark and only altering the packet
state.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/sendmsg.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -130,7 +130,9 @@ static inline void rxrpc_instant_resend(
spin_lock_bh(&call->lock);
if (call->state < RXRPC_CALL_COMPLETE) {
- call->rxtx_annotations[ix] = RXRPC_TX_ANNO_RETRANS;
+ call->rxtx_annotations[ix] =
+ (call->rxtx_annotations[ix] & RXRPC_TX_ANNO_LAST) |
+ RXRPC_TX_ANNO_RETRANS;
if (!test_and_set_bit(RXRPC_CALL_EV_RESEND, &call->events))
rxrpc_queue_call(call);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qu Wenruo <[email protected]>
[ Upstream commit 4d31778aa2fa342f5f92ca4025b293a1729161d1 ]
When multiple pending snapshots referring to the same source subvolume
are executed, enabled quota will cause root item corruption, where root
items are using old bytenr (no backref in extent tree).
This can be triggered by fstests btrfs/152.
The cause is when source subvolume is still dirty, extra commit
(simplied transaction commit) of qgroup_account_snapshot() can skip
dirty roots not recorded in current transaction, making root item of
source subvolume not updated.
Fix it by forcing recording source subvolume in current transaction
before qgroup sub-transaction commit.
Reported-by: Justin Maggard <[email protected]>
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/transaction.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -319,7 +319,7 @@ static int record_root_in_trans(struct b
if ((test_bit(BTRFS_ROOT_REF_COWS, &root->state) &&
root->last_trans < trans->transid) || force) {
WARN_ON(root == fs_info->extent_root);
- WARN_ON(root->commit_root != root->node);
+ WARN_ON(!force && root->commit_root != root->node);
/*
* see below for IN_TRANS_SETUP usage rules
@@ -1366,6 +1366,14 @@ static int qgroup_account_snapshot(struc
return 0;
/*
+ * Ensure dirty @src will be commited. Or, after comming
+ * commit_fs_roots() and switch_commit_roots(), any dirty but not
+ * recorded root will never be updated again, causing an outdated root
+ * item.
+ */
+ record_root_in_trans(trans, src, 1);
+
+ /*
* We are going to commit transaction, see btrfs_commit_transaction()
* comment for reason locking tree_log_mutex
*/
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Hansen <[email protected]>
[ Upstream commit 639d6aafe437a7464399d2a77d006049053df06f ]
__ro_after_init data gets stuck in the .rodata section. That's normally
fine because the kernel itself manages the R/W properties.
But, if we run __change_page_attr() on an area which is __ro_after_init,
the .rodata checks will trigger and force the area to be immediately
read-only, even if it is early-ish in boot. This caused problems when
trying to clear the _PAGE_GLOBAL bit for these area in the PTI code:
it cleared _PAGE_GLOBAL like I asked, but also took it up on itself
to clear _PAGE_RW. The kernel then oopses the next time it wrote to
a __ro_after_init data structure.
To fix this, add the kernel_set_to_readonly check, just like we have
for kernel text, just a few lines below in this function.
Signed-off-by: Dave Hansen <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/pageattr.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -298,9 +298,11 @@ static inline pgprot_t static_protection
/*
* The .rodata section needs to be read-only. Using the pfn
- * catches all aliases.
+ * catches all aliases. This also includes __ro_after_init,
+ * so do not enforce until kernel_set_to_readonly is true.
*/
- if (within(pfn, __pa_symbol(__start_rodata) >> PAGE_SHIFT,
+ if (kernel_set_to_readonly &&
+ within(pfn, __pa_symbol(__start_rodata) >> PAGE_SHIFT,
__pa_symbol(__end_rodata) >> PAGE_SHIFT))
pgprot_val(forbidden) |= _PAGE_RW;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qu Wenruo <[email protected]>
[ Upstream commit 3c0efdf03b2d127f0e40e30db4e7aa0429b1b79a ]
The extent tree of the test fs is like the following:
BTRFS info (device (null)): leaf 16327509003777336587 total ptrs 1 free space 3919
item 0 key (4096 168 4096) itemoff 3944 itemsize 51
extent refs 1 gen 1 flags 2
tree block key (68719476736 0 0) level 1
^^^^^^^
ref#0: tree block backref root 5
And it's using an empty tree for fs tree, so there is no way that its
level can be 1.
For REAL (created by mkfs) fs tree backref with no skinny metadata, the
result should look like:
item 3 key (30408704 EXTENT_ITEM 4096) itemoff 3845 itemsize 51
refs 1 gen 4 flags TREE_BLOCK
tree block key (256 INODE_ITEM 0) level 0
^^^^^^^
tree block backref root 5
Fix the level to 0, so it won't break later tree level checker.
Fixes: faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
Signed-off-by: Qu Wenruo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tests/qgroup-tests.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/tests/qgroup-tests.c
+++ b/fs/btrfs/tests/qgroup-tests.c
@@ -63,7 +63,7 @@ static int insert_normal_tree_ref(struct
btrfs_set_extent_generation(leaf, item, 1);
btrfs_set_extent_flags(leaf, item, BTRFS_EXTENT_FLAG_TREE_BLOCK);
block_info = (struct btrfs_tree_block_info *)(item + 1);
- btrfs_set_tree_block_level(leaf, block_info, 1);
+ btrfs_set_tree_block_level(leaf, block_info, 0);
iref = (struct btrfs_extent_inline_ref *)(block_info + 1);
if (parent > 0) {
btrfs_set_extent_inline_ref_type(leaf, iref,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Smart <[email protected]>
[ Upstream commit bb06ec31452fb2da1594f88035c2ecea4e0652f4 ]
The nvmf_check_if_ready() checks that were added are very simplistic.
As such, the routine allows a lot of cases to fail ios during windows
of reset or re-connection. In cases where there are not multi-path
options present, the error goes back to the callee - the filesystem
or application. Not good.
The common routine was rewritten and calling syntax slightly expanded
so that per-transport is_ready routines don't need to be present.
The transports now call the routine directly. The routine is now a
fabrics routine rather than an inline function.
The routine now looks at controller state to decide the action to
take. Some states mandate io failure. Others define the condition where
a command can be accepted. When the decision is unclear, a generic
queue-or-reject check is made to look for failfast or multipath ios and
only fails the io if it is so marked. Otherwise, the io will be queued
and wait for the controller state to resolve.
Admin commands issued via ioctl share a live admin queue with commands
from the transport for controller init. The ioctls could be intermixed
with the initialization commands. It's possible for the ioctl cmd to
be issued prior to the controller being enabled. To block this, the
ioctl admin commands need to be distinguished from admin commands used
for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to
reflect this division and set it on ioctls requests. As the
nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(),
ensure that commands allocated by the ioctl path (actually anything
in core.c) preps the nvme_req(req) before starting the io. This will
preserve the USERCMD flag during execution and/or retry.
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/core.c | 17 ++++++---
drivers/nvme/host/fabrics.c | 79 ++++++++++++++++++++++++++++++++++++++++++++
drivers/nvme/host/fabrics.h | 33 +-----------------
drivers/nvme/host/fc.c | 12 +-----
drivers/nvme/host/nvme.h | 1
drivers/nvme/host/rdma.c | 14 +------
drivers/nvme/target/loop.c | 11 +-----
7 files changed, 101 insertions(+), 66 deletions(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -379,6 +379,15 @@ static void nvme_put_ns(struct nvme_ns *
kref_put(&ns->kref, nvme_free_ns);
}
+static inline void nvme_clear_nvme_request(struct request *req)
+{
+ if (!(req->rq_flags & RQF_DONTPREP)) {
+ nvme_req(req)->retries = 0;
+ nvme_req(req)->flags = 0;
+ req->rq_flags |= RQF_DONTPREP;
+ }
+}
+
struct request *nvme_alloc_request(struct request_queue *q,
struct nvme_command *cmd, blk_mq_req_flags_t flags, int qid)
{
@@ -395,6 +404,7 @@ struct request *nvme_alloc_request(struc
return req;
req->cmd_flags |= REQ_FAILFAST_DRIVER;
+ nvme_clear_nvme_request(req);
nvme_req(req)->cmd = cmd;
return req;
@@ -611,11 +621,7 @@ blk_status_t nvme_setup_cmd(struct nvme_
{
blk_status_t ret = BLK_STS_OK;
- if (!(req->rq_flags & RQF_DONTPREP)) {
- nvme_req(req)->retries = 0;
- nvme_req(req)->flags = 0;
- req->rq_flags |= RQF_DONTPREP;
- }
+ nvme_clear_nvme_request(req);
switch (req_op(req)) {
case REQ_OP_DRV_IN:
@@ -745,6 +751,7 @@ static int nvme_submit_user_cmd(struct r
return PTR_ERR(req);
req->timeout = timeout ? timeout : ADMIN_TIMEOUT;
+ nvme_req(req)->flags |= NVME_REQ_USERCMD;
if (ubuffer && bufflen) {
ret = blk_rq_map_user(q, req, NULL, ubuffer, bufflen,
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -536,6 +536,85 @@ static struct nvmf_transport_ops *nvmf_l
return NULL;
}
+blk_status_t nvmf_check_if_ready(struct nvme_ctrl *ctrl, struct request *rq,
+ bool queue_live, bool is_connected)
+{
+ struct nvme_command *cmd = nvme_req(rq)->cmd;
+
+ if (likely(ctrl->state == NVME_CTRL_LIVE && is_connected))
+ return BLK_STS_OK;
+
+ switch (ctrl->state) {
+ case NVME_CTRL_DELETING:
+ goto reject_io;
+
+ case NVME_CTRL_NEW:
+ case NVME_CTRL_CONNECTING:
+ if (!is_connected)
+ /*
+ * This is the case of starting a new
+ * association but connectivity was lost
+ * before it was fully created. We need to
+ * error the commands used to initialize the
+ * controller so the reconnect can go into a
+ * retry attempt. The commands should all be
+ * marked REQ_FAILFAST_DRIVER, which will hit
+ * the reject path below. Anything else will
+ * be queued while the state settles.
+ */
+ goto reject_or_queue_io;
+
+ if ((queue_live &&
+ !(nvme_req(rq)->flags & NVME_REQ_USERCMD)) ||
+ (!queue_live && blk_rq_is_passthrough(rq) &&
+ cmd->common.opcode == nvme_fabrics_command &&
+ cmd->fabrics.fctype == nvme_fabrics_type_connect))
+ /*
+ * If queue is live, allow only commands that
+ * are internally generated pass through. These
+ * are commands on the admin queue to initialize
+ * the controller. This will reject any ioctl
+ * admin cmds received while initializing.
+ *
+ * If the queue is not live, allow only a
+ * connect command. This will reject any ioctl
+ * admin cmd as well as initialization commands
+ * if the controller reverted the queue to non-live.
+ */
+ return BLK_STS_OK;
+
+ /*
+ * fall-thru to the reject_or_queue_io clause
+ */
+ break;
+
+ /* these cases fall-thru
+ * case NVME_CTRL_LIVE:
+ * case NVME_CTRL_RESETTING:
+ */
+ default:
+ break;
+ }
+
+reject_or_queue_io:
+ /*
+ * Any other new io is something we're not in a state to send
+ * to the device. Default action is to busy it and retry it
+ * after the controller state is recovered. However, anything
+ * marked for failfast or nvme multipath is immediately failed.
+ * Note: commands used to initialize the controller will be
+ * marked for failfast.
+ * Note: nvme cli/ioctl commands are marked for failfast.
+ */
+ if (!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
+ return BLK_STS_RESOURCE;
+
+reject_io:
+ nvme_req(rq)->status = NVME_SC_ABORT_REQ;
+ return BLK_STS_IOERR;
+}
+EXPORT_SYMBOL_GPL(nvmf_check_if_ready);
+
static const match_table_t opt_tokens = {
{ NVMF_OPT_TRANSPORT, "transport=%s" },
{ NVMF_OPT_TRADDR, "traddr=%s" },
--- a/drivers/nvme/host/fabrics.h
+++ b/drivers/nvme/host/fabrics.h
@@ -157,36 +157,7 @@ void nvmf_unregister_transport(struct nv
void nvmf_free_options(struct nvmf_ctrl_options *opts);
int nvmf_get_address(struct nvme_ctrl *ctrl, char *buf, int size);
bool nvmf_should_reconnect(struct nvme_ctrl *ctrl);
-
-static inline blk_status_t nvmf_check_init_req(struct nvme_ctrl *ctrl,
- struct request *rq)
-{
- struct nvme_command *cmd = nvme_req(rq)->cmd;
-
- /*
- * We cannot accept any other command until the connect command has
- * completed, so only allow connect to pass.
- */
- if (!blk_rq_is_passthrough(rq) ||
- cmd->common.opcode != nvme_fabrics_command ||
- cmd->fabrics.fctype != nvme_fabrics_type_connect) {
- /*
- * Connecting state means transport disruption or initial
- * establishment, which can take a long time and even might
- * fail permanently, fail fast to give upper layers a chance
- * to failover.
- * Deleting state means that the ctrl will never accept commands
- * again, fail it permanently.
- */
- if (ctrl->state == NVME_CTRL_CONNECTING ||
- ctrl->state == NVME_CTRL_DELETING) {
- nvme_req(rq)->status = NVME_SC_ABORT_REQ;
- return BLK_STS_IOERR;
- }
- return BLK_STS_RESOURCE; /* try again later */
- }
-
- return BLK_STS_OK;
-}
+blk_status_t nvmf_check_if_ready(struct nvme_ctrl *ctrl,
+ struct request *rq, bool queue_live, bool is_connected);
#endif /* _NVME_FABRICS_H */
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -2284,14 +2284,6 @@ nvme_fc_start_fcp_op(struct nvme_fc_ctrl
return BLK_STS_OK;
}
-static inline blk_status_t nvme_fc_is_ready(struct nvme_fc_queue *queue,
- struct request *rq)
-{
- if (unlikely(!test_bit(NVME_FC_Q_LIVE, &queue->flags)))
- return nvmf_check_init_req(&queue->ctrl->ctrl, rq);
- return BLK_STS_OK;
-}
-
static blk_status_t
nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
@@ -2307,7 +2299,9 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *h
u32 data_len;
blk_status_t ret;
- ret = nvme_fc_is_ready(queue, rq);
+ ret = nvmf_check_if_ready(&queue->ctrl->ctrl, rq,
+ test_bit(NVME_FC_Q_LIVE, &queue->flags),
+ ctrl->rport->remoteport.port_state == FC_OBJSTATE_ONLINE);
if (unlikely(ret))
return ret;
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -109,6 +109,7 @@ struct nvme_request {
enum {
NVME_REQ_CANCELLED = (1 << 0),
+ NVME_REQ_USERCMD = (1 << 1),
};
static inline struct nvme_request *nvme_req(struct request *req)
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1594,17 +1594,6 @@ nvme_rdma_timeout(struct request *rq, bo
return BLK_EH_HANDLED;
}
-/*
- * We cannot accept any other command until the Connect command has completed.
- */
-static inline blk_status_t
-nvme_rdma_is_ready(struct nvme_rdma_queue *queue, struct request *rq)
-{
- if (unlikely(!test_bit(NVME_RDMA_Q_LIVE, &queue->flags)))
- return nvmf_check_init_req(&queue->ctrl->ctrl, rq);
- return BLK_STS_OK;
-}
-
static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
@@ -1620,7 +1609,8 @@ static blk_status_t nvme_rdma_queue_rq(s
WARN_ON_ONCE(rq->tag < 0);
- ret = nvme_rdma_is_ready(queue, rq);
+ ret = nvmf_check_if_ready(&queue->ctrl->ctrl, rq,
+ test_bit(NVME_RDMA_Q_LIVE, &queue->flags), true);
if (unlikely(ret))
return ret;
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -149,14 +149,6 @@ nvme_loop_timeout(struct request *rq, bo
return BLK_EH_HANDLED;
}
-static inline blk_status_t nvme_loop_is_ready(struct nvme_loop_queue *queue,
- struct request *rq)
-{
- if (unlikely(!test_bit(NVME_LOOP_Q_LIVE, &queue->flags)))
- return nvmf_check_init_req(&queue->ctrl->ctrl, rq);
- return BLK_STS_OK;
-}
-
static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
@@ -166,7 +158,8 @@ static blk_status_t nvme_loop_queue_rq(s
struct nvme_loop_iod *iod = blk_mq_rq_to_pdu(req);
blk_status_t ret;
- ret = nvme_loop_is_ready(queue, req);
+ ret = nvmf_check_if_ready(&queue->ctrl->ctrl, req,
+ test_bit(NVME_LOOP_Q_LIVE, &queue->flags), true);
if (unlikely(ret))
return ret;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sriharsha Basavapatna <[email protected]>
[ Upstream commit 479ca3bf91da971fcefc003cf5773e8d7db24794 ]
The driver currently uses src port field (along with other fields) in the
decap tunnel key, while looking up and adding tunnel nodes. This leads to
redundant cfa_decap_filter_alloc() requests to the FW and flow-miss in the
flow engine. Fix this by ignoring the src port field in decap tunnel nodes.
Fixes: f484f6782e01 ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter")
Signed-off-by: Sriharsha Basavapatna <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
@@ -992,8 +992,10 @@ static int bnxt_tc_get_decap_handle(stru
/* Check if there's another flow using the same tunnel decap.
* If not, add this tunnel to the table and resolve the other
- * tunnel header fileds
+ * tunnel header fileds. Ignore src_port in the tunnel_key,
+ * since it is not required for decap filters.
*/
+ decap_key->tp_src = 0;
decap_node = bnxt_tc_get_tunnel_node(bp, &tc_info->decap_table,
&tc_info->decap_ht_params,
decap_key);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
[ Upstream commit 471d557afed155b85da237ec46c549f443eeb5de ]
Currently if we allocate extents beyond an inode's i_size (through the
fallocate system call) and then fsync the file, we log the extents but
after a power failure we replay them and then immediately drop them.
This behaviour happens since about 2009, commit c71bf099abdd ("Btrfs:
Avoid orphan inodes cleanup while replaying log"), because it marks
the inode as an orphan instead of dropping any extents beyond i_size
before replaying logged extents, so after the log replay, and while
the mount operation is still ongoing, we find the inode marked as an
orphan and then perform a truncation (drop extents beyond the inode's
i_size). Because the processing of orphan inodes is still done
right after replaying the log and before the mount operation finishes,
the intention of that commit does not make any sense (at least as
of today). However reverting that behaviour is not enough, because
we can not simply discard all extents beyond i_size and then replay
logged extents, because we risk dropping extents beyond i_size created
in past transactions, for example:
add prealloc extent beyond i_size
fsync - clears the flag BTRFS_INODE_NEEDS_FULL_SYNC from the inode
transaction commit
add another prealloc extent beyond i_size
fsync - triggers the fast fsync path
power failure
In that scenario, we would drop the first extent and then replay the
second one. To fix this just make sure that all prealloc extents
beyond i_size are logged, and if we find too many (which is far from
a common case), fallback to a full transaction commit (like we do when
logging regular extents in the fast fsync path).
Trivial reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xab 0 256K" /mnt/foo
$ sync
$ xfs_io -c "falloc -k 256K 1M" /mnt/foo
$ xfs_io -c "fsync" /mnt/foo
<power failure>
# mount to replay log
$ mount /dev/sdb /mnt
# at this point the file only has one extent, at offset 0, size 256K
A test case for fstests follows soon, covering multiple scenarios that
involve adding prealloc extents with previous shrinking truncates and
without such truncates.
Fixes: c71bf099abdd ("Btrfs: Avoid orphan inodes cleanup while replaying log")
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 58 insertions(+), 5 deletions(-)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2461,13 +2461,41 @@ static int replay_one_buffer(struct btrf
if (ret)
break;
- /* for regular files, make sure corresponding
- * orphan item exist. extents past the new EOF
- * will be truncated later by orphan cleanup.
+ /*
+ * Before replaying extents, truncate the inode to its
+ * size. We need to do it now and not after log replay
+ * because before an fsync we can have prealloc extents
+ * added beyond the inode's i_size. If we did it after,
+ * through orphan cleanup for example, we would drop
+ * those prealloc extents just after replaying them.
*/
if (S_ISREG(mode)) {
- ret = insert_orphan_item(wc->trans, root,
- key.objectid);
+ struct inode *inode;
+ u64 from;
+
+ inode = read_one_inode(root, key.objectid);
+ if (!inode) {
+ ret = -EIO;
+ break;
+ }
+ from = ALIGN(i_size_read(inode),
+ root->fs_info->sectorsize);
+ ret = btrfs_drop_extents(wc->trans, root, inode,
+ from, (u64)-1, 1);
+ /*
+ * If the nlink count is zero here, the iput
+ * will free the inode. We bump it to make
+ * sure it doesn't get freed until the link
+ * count fixup is done.
+ */
+ if (!ret) {
+ if (inode->i_nlink == 0)
+ inc_nlink(inode);
+ /* Update link count and nbytes. */
+ ret = btrfs_update_inode(wc->trans,
+ root, inode);
+ }
+ iput(inode);
if (ret)
break;
}
@@ -4321,6 +4349,31 @@ static int btrfs_log_changed_extents(str
num++;
}
+ /*
+ * Add all prealloc extents beyond the inode's i_size to make sure we
+ * don't lose them after doing a fast fsync and replaying the log.
+ */
+ if (inode->flags & BTRFS_INODE_PREALLOC) {
+ struct rb_node *node;
+
+ for (node = rb_last(&tree->map); node; node = rb_prev(node)) {
+ em = rb_entry(node, struct extent_map, rb_node);
+ if (em->start < i_size_read(&inode->vfs_inode))
+ break;
+ if (!list_empty(&em->list))
+ continue;
+ /* Same as above loop. */
+ if (++num > 32768) {
+ list_del_init(&tree->modified_extents);
+ ret = -EFBIG;
+ goto process;
+ }
+ refcount_inc(&em->refs);
+ set_bit(EXTENT_FLAG_LOGGING, &em->flags);
+ list_add_tail(&em->list, &extents);
+ }
+ }
+
list_sort(NULL, &extents, extent_cmp);
btrfs_get_logged_extents(inode, logged_list, logged_start, logged_end);
/*
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jun Piao <[email protected]>
[ Upstream commit bb34f24c7d2c98d0c81838a7700e6068325b17a0 ]
We should not handle migrate lockres if we are already in
'DLM_CTXT_IN_SHUTDOWN', as that will cause lockres remains after leaving
dlm domain. At last other nodes will get stuck into infinite loop when
requsting lock from us.
The problem is caused by concurrency umount between nodes. Before
receiveing N1's DLM_BEGIN_EXIT_DOMAIN_MSG, N2 has picked up N1 as the
migrate target. So N2 will continue sending lockres to N1 even though
N1 has left domain.
N1 N2 (owner)
touch file
access the file,
and get pr lock
begin leave domain and
pick up N1 as new owner
begin leave domain and
migrate all lockres done
begin migrate lockres to N1
end leave domain, but
the lockres left
unexpectedly, because
migrate task has passed
[[email protected]: v3]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jun Piao <[email protected]>
Reviewed-by: Yiwen Jiang <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Reviewed-by: Changwei Ge <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/dlm/dlmdomain.c | 14 --------------
fs/ocfs2/dlm/dlmdomain.h | 25 ++++++++++++++++++++++++-
fs/ocfs2/dlm/dlmrecovery.c | 9 +++++++++
3 files changed, 33 insertions(+), 15 deletions(-)
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -675,20 +675,6 @@ static void dlm_leave_domain(struct dlm_
spin_unlock(&dlm->spinlock);
}
-int dlm_shutting_down(struct dlm_ctxt *dlm)
-{
- int ret = 0;
-
- spin_lock(&dlm_domain_lock);
-
- if (dlm->dlm_state == DLM_CTXT_IN_SHUTDOWN)
- ret = 1;
-
- spin_unlock(&dlm_domain_lock);
-
- return ret;
-}
-
void dlm_unregister_domain(struct dlm_ctxt *dlm)
{
int leave = 0;
--- a/fs/ocfs2/dlm/dlmdomain.h
+++ b/fs/ocfs2/dlm/dlmdomain.h
@@ -28,7 +28,30 @@
extern spinlock_t dlm_domain_lock;
extern struct list_head dlm_domains;
-int dlm_shutting_down(struct dlm_ctxt *dlm);
+static inline int dlm_joined(struct dlm_ctxt *dlm)
+{
+ int ret = 0;
+
+ spin_lock(&dlm_domain_lock);
+ if (dlm->dlm_state == DLM_CTXT_JOINED)
+ ret = 1;
+ spin_unlock(&dlm_domain_lock);
+
+ return ret;
+}
+
+static inline int dlm_shutting_down(struct dlm_ctxt *dlm)
+{
+ int ret = 0;
+
+ spin_lock(&dlm_domain_lock);
+ if (dlm->dlm_state == DLM_CTXT_IN_SHUTDOWN)
+ ret = 1;
+ spin_unlock(&dlm_domain_lock);
+
+ return ret;
+}
+
void dlm_fire_domain_eviction_callbacks(struct dlm_ctxt *dlm,
int node_num);
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -1378,6 +1378,15 @@ int dlm_mig_lockres_handler(struct o2net
if (!dlm_grab(dlm))
return -EINVAL;
+ if (!dlm_joined(dlm)) {
+ mlog(ML_ERROR, "Domain %s not joined! "
+ "lockres %.*s, master %u\n",
+ dlm->name, mres->lockname_len,
+ mres->lockname, mres->master);
+ dlm_put(dlm);
+ return -EINVAL;
+ }
+
BUG_ON(!(mres->flags & (DLM_MRES_RECOVERY|DLM_MRES_MIGRATION)));
real_master = mres->master;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sai Praneeth <[email protected]>
[ Upstream commit 162ee5a8ab49be40d253f90e94aef712470a3a24 ]
Linus reported the following boot warning:
WARNING: CPU: 0 PID: 0 at arch/x86/include/asm/tlbflush.h:134 load_new_mm_cr3+0x114/0x170
[...]
Call Trace:
switch_mm_irqs_off+0x267/0x590
switch_mm+0xe/0x20
efi_switch_mm+0x3e/0x50
efi_enter_virtual_mode+0x43f/0x4da
start_kernel+0x3bf/0x458
secondary_startup_64+0xa5/0xb0
... after merging:
03781e40890c: x86/efi: Use efi_switch_mm() rather than manually twiddling with %cr3
When the platform supports PCID and if CONFIG_DEBUG_VM=y is enabled,
build_cr3_noflush() (called via switch_mm()) does a sanity check to see
if X86_FEATURE_PCID is set.
Presently, build_cr3_noflush() uses "this_cpu_has(X86_FEATURE_PCID)" to
perform the check but this_cpu_has() works only after SMP is initialized
(i.e. per cpu cpu_info's should be populated) and this happens to be very
late in the boot process (during rest_init()).
As efi_runtime_services() are called during (early) kernel boot time
and run time, modify build_cr3_noflush() to use boot_cpu_has() all the
time. As suggested by Dave Hansen, this should be OK because all CPU's have
same capabilities on x86.
With this change the warning is fixed.
( Dave also suggested that we put a warning in this_cpu_has() if it's used
early in the boot process. This is still work in progress as it affects
MCE. )
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Sai Praneeth Prakhya <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Lee Chun-Yi <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Shankar <[email protected]>
Cc: Ricardo Neri <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/tlbflush.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -131,7 +131,12 @@ static inline unsigned long build_cr3(pg
static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
{
VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
- VM_WARN_ON_ONCE(!this_cpu_has(X86_FEATURE_PCID));
+ /*
+ * Use boot_cpu_has() instead of this_cpu_has() as this function
+ * might be called during early boot. This should work even after
+ * boot because all CPU's the have same capabilities:
+ */
+ VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davidlohr Bueso <[email protected]>
[ Upstream commit d29a20645d5e929aa7e8616f28e5d8e1c49263ec ]
While running rt-tests' pi_stress program I got the following splat:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 27 PID: 0 at kernel/sched/sched.h:960 assert_clock_updated.isra.38.part.39+0x13/0x20
[...]
<IRQ>
enqueue_top_rt_rq+0xf4/0x150
? cpufreq_dbs_governor_start+0x170/0x170
sched_rt_rq_enqueue+0x65/0x80
sched_rt_period_timer+0x156/0x360
? sched_rt_rq_enqueue+0x80/0x80
__hrtimer_run_queues+0xfa/0x260
hrtimer_interrupt+0xcb/0x220
smp_apic_timer_interrupt+0x62/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
[...]
do_idle+0x183/0x1e0
cpu_startup_entry+0x5f/0x70
start_secondary+0x192/0x1d0
secondary_startup_64+0xa5/0xb0
We can get rid of it be the "traditional" means of adding an
update_rq_clock() call after acquiring the rq->lock in
do_sched_rt_period_timer().
The case for the RT task throttling (which this workload also hits)
can be ignored in that the skip_update call is actually bogus and
quite the contrary (the request bits are removed/reverted).
By setting RQCF_UPDATED we really don't care if the skip is happening
or not and will therefore make the assert_clock_updated() check happy.
Signed-off-by: Davidlohr Bueso <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/rt.c | 2 ++
1 file changed, 2 insertions(+)
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -843,6 +843,8 @@ static int do_sched_rt_period_timer(stru
continue;
raw_spin_lock(&rq->lock);
+ update_rq_clock(rq);
+
if (rt_rq->rt_time) {
u64 runtime;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yang Shi <[email protected]>
[ Upstream commit f0849ac0b8e072073ec5fcc7fadd05a77434364e ]
For PTE-mapped THP, the compound THP has not been split to normal 4K
pages yet, the whole THP is considered referenced if any one of sub page
is referenced.
When walking PTE-mapped THP by pvmw, all relevant PTEs will be checked
to retrieve referenced bit. But, the current code just returns the
result of the last PTE. If the last PTE has not referenced, the
referenced flag will be cleared.
Just set referenced when ptep{pmdp}_clear_young_notify() returns true.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Yang Shi <[email protected]>
Reported-by: Gang Deng <[email protected]>
Suggested-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/page_idle.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/mm/page_idle.c
+++ b/mm/page_idle.c
@@ -65,11 +65,15 @@ static bool page_idle_clear_pte_refs_one
while (page_vma_mapped_walk(&pvmw)) {
addr = pvmw.address;
if (pvmw.pte) {
- referenced = ptep_clear_young_notify(vma, addr,
- pvmw.pte);
+ /*
+ * For PTE-mapped THP, one sub page is referenced,
+ * the whole THP is referenced.
+ */
+ if (ptep_clear_young_notify(vma, addr, pvmw.pte))
+ referenced = true;
} else if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
- referenced = pmdp_clear_young_notify(vma, addr,
- pvmw.pmd);
+ if (pmdp_clear_young_notify(vma, addr, pvmw.pmd))
+ referenced = true;
} else {
/* unexpected pmd-mapped page? */
WARN_ON_ONCE(1);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Borisov <[email protected]>
[ Upstream commit 1e1c50a929bc9e49bc3f9935b92450d9e69f8158 ]
do_chunk_alloc implements a loop checking whether there is a pending
chunk allocation and if so causes the caller do loop. Generally this
loop is executed only once, however testing with btrfs/072 on a single
core vm machines uncovered an extreme case where the system could loop
indefinitely. This is due to a missing cond_resched when loop which
doesn't give a chance to the previous chunk allocator finish its job.
The fix is to simply add the missing cond_resched.
Fixes: 6d74119f1a3e ("Btrfs: avoid taking the chunk_mutex in do_chunk_alloc")
Signed-off-by: Nikolay Borisov <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/extent-tree.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -4657,6 +4657,7 @@ again:
if (wait_for_alloc) {
mutex_unlock(&fs_info->chunk_mutex);
wait_for_alloc = 0;
+ cond_resched();
goto again;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
[ Upstream commit af7227338135d2f1b1552bf9a6d43e02dcba10b9 ]
Currently if some fatal errors occur, like all IO get -EIO, resources
would be cleaned up when
a) transaction is being committed or
b) BTRFS_FS_STATE_ERROR is set
However, in some rare cases, resources may be left alone after transaction
gets aborted and umount may run into some ASSERT(), e.g.
ASSERT(list_empty(&block_group->dirty_list));
For case a), in btrfs_commit_transaciton(), there're several places at the
beginning where we just call btrfs_end_transaction() without cleaning up
resources. For case b), it is possible that the trans handle doesn't have
any dirty stuff, then only trans hanlde is marked as aborted while
BTRFS_FS_STATE_ERROR is not set, so resources remain in memory.
This makes btrfs also check BTRFS_FS_STATE_TRANS_ABORTED to make sure that
all resources won't stay in memory after umount.
Signed-off-by: Liu Bo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/disk-io.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -3735,7 +3735,8 @@ void close_ctree(struct btrfs_fs_info *f
btrfs_err(fs_info, "commit super ret %d", ret);
}
- if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state))
+ if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state) ||
+ test_bit(BTRFS_FS_STATE_TRANS_ABORTED, &fs_info->fs_state))
btrfs_error_commit_super(fs_info);
kthread_stop(fs_info->transaction_kthread);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huang Ying <[email protected]>
[ Upstream commit e92bb4dd9673945179b1fc738c9817dd91bfb629 ]
When page_mapping() is called and the mapping is dereferenced in
page_evicatable() through shrink_active_list(), it is possible for the
inode to be truncated and the embedded address space to be freed at the
same time. This may lead to the following race.
CPU1 CPU2
truncate(inode) shrink_active_list()
... page_evictable(page)
truncate_inode_page(mapping, page);
delete_from_page_cache(page)
spin_lock_irqsave(&mapping->tree_lock, flags);
__delete_from_page_cache(page, NULL)
page_cache_tree_delete(..)
... mapping = page_mapping(page);
page->mapping = NULL;
...
spin_unlock_irqrestore(&mapping->tree_lock, flags);
page_cache_free_page(mapping, page)
put_page(page)
if (put_page_testzero(page)) -> false
- inode now has no pages and can be freed including embedded address_space
mapping_unevictable(mapping)
test_bit(AS_UNEVICTABLE, &mapping->flags);
- we've dereferenced mapping which is potentially already free.
Similar race exists between swap cache freeing and page_evicatable()
too.
The address_space in inode and swap cache will be freed after a RCU
grace period. So the races are fixed via enclosing the page_mapping()
and address_space usage in rcu_read_lock/unlock(). Some comments are
added in code to make it clear what is protected by the RCU read lock.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/vmscan.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -3896,7 +3896,13 @@ int node_reclaim(struct pglist_data *pgd
*/
int page_evictable(struct page *page)
{
- return !mapping_unevictable(page_mapping(page)) && !PageMlocked(page);
+ int ret;
+
+ /* Prevent address_space of inode and swap cache from being freed */
+ rcu_read_lock();
+ ret = !mapping_unevictable(page_mapping(page)) && !PageMlocked(page);
+ rcu_read_unlock();
+ return ret;
}
#ifdef CONFIG_SHMEM
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikhail Malygin <[email protected]>
[ Upstream commit efc365e7290d040fbd43f60b0e97653489a739d4 ]
On ppc64le arch rxe_add command causes oops in kernel log:
[ 92.495140] Oops: Kernel access of bad area, sig: 11 [#1]
[ 92.499710] SMP NR_CPUS=2048 NUMA pSeries
[ 92.499792] Modules linked in: ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) nf_conntrack_netlink(E) nfnetlink(E) xfrm_user(E) iptable
_nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nf_nat_ipv4(E) xt_addrtype(E) iptable_filter(E) ip_tables(E) xt_conntrack(E) x_tables(E)
nf_nat(E) nf_conntrack(E) br_netfilter(E) bridge(E) stp(E) llc(E) overlay(E) af_packet(E) rpcrdma(E) ib_isert(E) iscsi_target_mod(E) i
b_iser(E) libiscsi(E) ib_srpt(E) target_core_mod(E) ib_srp(E) ib_ipoib(E) rdma_ucm(E) ib_ucm(E) ib_uverbs(E) ib_umad(E) bochs_drm(E) tt
m(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) drm(E) agpgart(E) virtio_rng(E) virtio_console(E) rtc_
generic(E) dm_ec(OEN) ttln_rdma(OEN) rdma_cm(E) configfs(E) iw_cm(E) ib_cm(E) rdma_rxe(E) ip6_udp_tunnel(E) udp_tunnel(E) ib_core(E) ql
a2xxx(E)
[ 92.499832] scsi_transport_fc(E) nvme_fc(E) nvme_fabrics(E) nvme_core(E) ipmi_watchdog(E) ipmi_ssif(E) ipmi_poweroff(E) ipmi_powernv(EX) ipmi_devintf(E) ipmi_msghandler(E) dummy(E) ext4(E) crc16(E) jbd2(E) mbcache(E) dm_service_time(E) scsi_transport_iscsi(E) sd_mod(E) sr_mod(E) cdrom(E) hid_generic(E) usbhid(E) virtio_blk(E) virtio_scsi(E) virtio_net(E) ibmvscsi(EX) scsi_transport_srp(E) xhci_pci(E) xhci_hcd(E) usbcore(E) usb_common(E) virtio_pci(E) virtio_ring(E) virtio(E) sunrpc(E) dm_mirror(E) dm_region_hash(E) dm_log(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) autofs4(E)
[ 92.499834] Supported: No, Unsupported modules are loaded
[ 92.499839] CPU: 3 PID: 5576 Comm: sh Tainted: G OE NX 4.4.120-ttln.17-default #1
[ 92.499841] task: c0000000afe8a490 ti: c0000000beba8000 task.ti: c0000000beba8000
[ 92.499842] NIP: c00000000008ba3c LR: c000000000027644 CTR: c00000000008ba10
[ 92.499844] REGS: c0000000bebab750 TRAP: 0300 Tainted: G OE NX (4.4.120-ttln.17-default)
[ 92.499850] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28424428 XER: 20000000
[ 92.499871] CFAR: 0000000000002424 DAR: 0000000000000208 DSISR: 40000000 SOFTE: 1
GPR00: c000000000027644 c0000000bebab9d0 c000000000f09700 0000000000000000
GPR04: d0000000043d7192 0000000000000002 000000000000001a fffffffffffffffe
GPR08: 000000000000009c c00000000008ba10 d0000000043e5848 d0000000043d3828
GPR12: c00000000008ba10 c000000007a02400 0000000010062e38 0000010020388860
GPR16: 0000000000000000 0000000000000000 00000100203885f0 00000000100f6c98
GPR20: c0000000b3f1fcc0 c0000000b3f1fc48 c0000000b3f1fbd0 c0000000b3f1fb58
GPR24: c0000000b3f1fae0 c0000000b3f1fa68 00000000000005dc c0000000b3f1f9f0
GPR28: d0000000043e5848 c0000000b3f1f900 c0000000b3f1f320 c0000000b3f1f000
[ 92.499881] NIP [c00000000008ba3c] dma_get_required_mask_pSeriesLP+0x2c/0x1a0
[ 92.499885] LR [c000000000027644] dma_get_required_mask+0x44/0xac
[ 92.499886] Call Trace:
[ 92.499891] [c0000000bebab9d0] [c0000000bebaba30] 0xc0000000bebaba30 (unreliable)
[ 92.499894] [c0000000bebaba10] [c000000000027644] dma_get_required_mask+0x44/0xac
[ 92.499904] [c0000000bebaba30] [d0000000043cb4b4] rxe_register_device+0xc4/0x430 [rdma_rxe]
[ 92.499910] [c0000000bebabab0] [d0000000043c06c8] rxe_add+0x448/0x4e0 [rdma_rxe]
[ 92.499915] [c0000000bebabb30] [d0000000043d28dc] rxe_net_add+0x4c/0xf0 [rdma_rxe]
[ 92.499921] [c0000000bebabb60] [d0000000043d305c] rxe_param_set_add+0x6c/0x1ac [rdma_rxe]
[ 92.499924] [c0000000bebabbf0] [c0000000000e78c0] param_attr_store+0xa0/0x180
[ 92.499927] [c0000000bebabc70] [c0000000000e6448] module_attr_store+0x48/0x70
[ 92.499932] [c0000000bebabc90] [c000000000391f60] sysfs_kf_write+0x70/0xb0
[ 92.499935] [c0000000bebabcb0] [c000000000390f1c] kernfs_fop_write+0x18c/0x1e0
[ 92.499939] [c0000000bebabd00] [c0000000002e22ac] __vfs_write+0x4c/0x1d0
[ 92.499942] [c0000000bebabd90] [c0000000002e2f94] vfs_write+0xc4/0x200
[ 92.499945] [c0000000bebabde0] [c0000000002e488c] SyS_write+0x6c/0x110
[ 92.499948] [c0000000bebabe30] [c000000000009384] system_call+0x38/0xe4
[ 92.499949] Instruction dump:
[ 92.499954] 4e800020 3c4c00e8 3842dcf0 7c0802a6 f8010010 60000000 7c0802a6 fba1ffe8
[ 92.499958] fbc1fff0 fbe1fff8 f8010010 f821ffc1 <e9230208> 7c7e1b78 2fa90000 419e0078
[ 92.499962] ---[ end trace bed077e15eb420cf ]---
It fails in dma_get_required_mask, that has ppc-specific implementation,
and fail if provided device argument is NULL
Signed-off-by: Mikhail Malygin <[email protected]>
Reviewed-by: Yonatan Cohen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_verbs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -1206,7 +1206,7 @@ int rxe_register_device(struct rxe_dev *
rxe->ndev->dev_addr);
dev->dev.dma_ops = &dma_virt_ops;
dma_coerce_mask_and_coherent(&dev->dev,
- dma_get_required_mask(dev->dev.parent));
+ dma_get_required_mask(&dev->dev));
dev->uverbs_abi_ver = RXE_UVERBS_ABI_VERSION;
dev->uverbs_cmd_mask = BIT_ULL(IB_USER_VERBS_CMD_GET_CONTEXT)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
[ Upstream commit b98def7ca6e152ee55e36863dddf6f41f12d1dc6 ]
If errors were returned by btrfs_next_leaf(), replay_dir_deletes needs
to bail out, otherwise @ret would be forced to be 0 after 'break;' and
the caller won't be aware of it.
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Liu Bo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2356,8 +2356,10 @@ again:
nritems = btrfs_header_nritems(path->nodes[0]);
if (path->slots[0] >= nritems) {
ret = btrfs_next_leaf(root, path);
- if (ret)
+ if (ret == 1)
break;
+ else if (ret < 0)
+ goto out;
}
btrfs_item_key_to_cpu(path->nodes[0], &found_key,
path->slots[0]);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <[email protected]>
[ Upstream commit 2d097c50212e137e7b53ffe3b37561153eeba87d ]
We can't just use scsi_cd() to get the scsi_cd structure, we have
to grab a live reference to the device. For both callbacks, we're
not inside an open where we already hold a reference to the device.
This fixes device removal/addition under concurrent device access,
which otherwise could result in the below oops.
NULL pointer dereference at 0000000000000010
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in:
sr 12:0:0:0: [sr2] scsi-1 drive
scsi_debug crc_t10dif crct10dif_generic crct10dif_common nvme nvme_core sb_edac xl
sr 12:0:0:0: Attached scsi CD-ROM sr2
sr_mod cdrom btrfs xor zstd_decompress zstd_compress xxhash lzo_compress zlib_defc
sr 12:0:0:0: Attached scsi generic sg7 type 5
igb ahci libahci i2c_algo_bit libata dca [last unloaded: crc_t10dif]
CPU: 43 PID: 4629 Comm: systemd-udevd Not tainted 4.16.0+ #650
Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016
RIP: 0010:sr_block_revalidate_disk+0x23/0x190 [sr_mod]
RSP: 0018:ffff883ff357bb58 EFLAGS: 00010292
RAX: ffffffffa00b07d0 RBX: ffff883ff3058000 RCX: ffff883ff357bb66
RDX: 0000000000000003 RSI: 0000000000007530 RDI: ffff881fea631000
RBP: 0000000000000000 R08: ffff881fe4d38400 R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000001b6 R12: 000000000800005d
R13: 000000000800005d R14: ffff883ffd9b3790 R15: 0000000000000000
FS: 00007f7dc8e6d8c0(0000) GS:ffff883fff340000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000003ffda98005 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __invalidate_device+0x48/0x60
check_disk_change+0x4c/0x60
sr_block_open+0x16/0xd0 [sr_mod]
__blkdev_get+0xb9/0x450
? iget5_locked+0x1c0/0x1e0
blkdev_get+0x11e/0x320
? bdget+0x11d/0x150
? _raw_spin_unlock+0xa/0x20
? bd_acquire+0xc0/0xc0
do_dentry_open+0x1b0/0x320
? inode_permission+0x24/0xc0
path_openat+0x4e6/0x1420
? cpumask_any_but+0x1f/0x40
? flush_tlb_mm_range+0xa0/0x120
do_filp_open+0x8c/0xf0
? __seccomp_filter+0x28/0x230
? _raw_spin_unlock+0xa/0x20
? __handle_mm_fault+0x7d6/0x9b0
? list_lru_add+0xa8/0xc0
? _raw_spin_unlock+0xa/0x20
? __alloc_fd+0xaf/0x160
? do_sys_open+0x1a6/0x230
do_sys_open+0x1a6/0x230
do_syscall_64+0x5a/0x100
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sr.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -585,18 +585,28 @@ out:
static unsigned int sr_block_check_events(struct gendisk *disk,
unsigned int clearing)
{
- struct scsi_cd *cd = scsi_cd(disk);
+ unsigned int ret = 0;
+ struct scsi_cd *cd;
- if (atomic_read(&cd->device->disk_events_disable_depth))
+ cd = scsi_cd_get(disk);
+ if (!cd)
return 0;
- return cdrom_check_events(&cd->cdi, clearing);
+ if (!atomic_read(&cd->device->disk_events_disable_depth))
+ ret = cdrom_check_events(&cd->cdi, clearing);
+
+ scsi_cd_put(cd);
+ return ret;
}
static int sr_block_revalidate_disk(struct gendisk *disk)
{
- struct scsi_cd *cd = scsi_cd(disk);
struct scsi_sense_hdr sshdr;
+ struct scsi_cd *cd;
+
+ cd = scsi_cd_get(disk);
+ if (!cd)
+ return -ENXIO;
/* if the unit is not ready, nothing more to do */
if (scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr))
@@ -605,6 +615,7 @@ static int sr_block_revalidate_disk(stru
sr_cd_check(&cd->cdi);
get_sectorsize(cd);
out:
+ scsi_cd_put(cd);
return 0;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Claudio Imbrenda <[email protected]>
[ Upstream commit 77da2ba0648a4fd52e5ff97b8b2b8dd312aec4b0 ]
This patch fixes a corner case for KSM. When two pages belong or
belonged to the same transparent hugepage, and they should be merged,
KSM fails to split the page, and therefore no merging happens.
This bug can be reproduced by:
* making sure ksm is running (in case disabling ksmtuned)
* enabling transparent hugepages
* allocating a THP-aligned 1-THP-sized buffer
e.g. on amd64: posix_memalign(&p, 1<<21, 1<<21)
* filling it with the same values
e.g. memset(p, 42, 1<<21)
* performing madvise to make it mergeable
e.g. madvise(p, 1<<21, MADV_MERGEABLE)
* waiting for KSM to perform a few scans
The expected outcome is that the all the pages get merged (1 shared and
the rest sharing); the actual outcome is that no pages get merged (1
unshared and the rest volatile)
The reason of this behaviour is that we increase the reference count
once for both pages we want to merge, but if they belong to the same
hugepage (or compound page), the reference counter used in both cases is
the one of the head of the compound page. This means that
split_huge_page will find a value of the reference counter too high and
will fail.
This patch solves this problem by testing if the two pages to merge
belong to the same hugepage when attempting to merge them. If so, the
hugepage is split safely. This means that the hugepage is not split if
not necessary.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Claudio Imbrenda <[email protected]>
Co-authored-by: Gerald Schaefer <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/ksm.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -2089,8 +2089,22 @@ static void cmp_and_merge_page(struct pa
tree_rmap_item =
unstable_tree_search_insert(rmap_item, page, &tree_page);
if (tree_rmap_item) {
+ bool split;
+
kpage = try_to_merge_two_pages(rmap_item, page,
tree_rmap_item, tree_page);
+ /*
+ * If both pages we tried to merge belong to the same compound
+ * page, then we actually ended up increasing the reference
+ * count of the same compound page twice, and split_huge_page
+ * failed.
+ * Here we set a flag if that happened, and we use it later to
+ * try split_huge_page again. Since we call put_page right
+ * afterwards, the reference count will be correct and
+ * split_huge_page should succeed.
+ */
+ split = PageTransCompound(page)
+ && compound_head(page) == compound_head(tree_page);
put_page(tree_page);
if (kpage) {
/*
@@ -2117,6 +2131,20 @@ static void cmp_and_merge_page(struct pa
break_cow(tree_rmap_item);
break_cow(rmap_item);
}
+ } else if (split) {
+ /*
+ * We are here if we tried to merge two pages and
+ * failed because they both belonged to the same
+ * compound page. We will split the page now, but no
+ * merging will take place.
+ * We do not want to add the cost of a full lock; if
+ * the page is locked, it is better to skip it and
+ * perhaps try again later.
+ */
+ if (!trylock_page(page))
+ return;
+ split_huge_page(page);
+ unlock_page(page);
}
}
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shunyong Yang <[email protected]>
[ Upstream commit 8913315e9459b146e5888ab5138e10daa061b885 ]
When multiple CPUs are related in one cpufreq policy, the first online
CPU will be chosen by default to handle cpufreq operations. Let's take
cpu0 and cpu1 as an example.
When cpu0 is offline, policy->cpu will be shifted to cpu1. cpu1's perf
capabilities should be initialized. Otherwise, perf capabilities are 0s
and speed change can not take effect.
This patch copies perf capabilities of the first online CPU to other
shared CPUs when policy shared type is CPUFREQ_SHARED_TYPE_ANY.
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Shunyong Yang <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/cppc_cpufreq.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -167,9 +167,19 @@ static int cppc_cpufreq_cpu_init(struct
NSEC_PER_USEC;
policy->shared_type = cpu->shared_type;
- if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+ if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
+ int i;
+
cpumask_copy(policy->cpus, cpu->shared_cpu_map);
- else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) {
+
+ for_each_cpu(i, policy->cpus) {
+ if (unlikely(i == policy->cpu))
+ continue;
+
+ memcpy(&all_cpu_data[i]->perf_caps, &cpu->perf_caps,
+ sizeof(cpu->perf_caps));
+ }
+ } else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) {
/* Support only SW_ANY for now. */
pr_debug("Unsupported CPU co-ord type\n");
return -EFAULT;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Falcon <[email protected]>
[ Upstream commit 41f714672f93608751dbd2fa2291d476a8ff0150 ]
The counter that tracks used TX descriptors pending completion
needs to be zeroed as part of a device reset. This change fixes
a bug causing transmit queues to be stopped unnecessarily and in
some cases a transmit queue stall and timeout reset. If the counter
is not reset, the remaining descriptors will not be "removed",
effectively reducing queue capacity. If the queue is over half full,
it will cause the queue to stall if stopped.
Signed-off-by: Thomas Falcon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2266,6 +2266,7 @@ static int reset_one_sub_crq_queue(struc
}
memset(scrq->msgs, 0, 4 * PAGE_SIZE);
+ atomic_set(&scrq->used, 0);
scrq->cur = 0;
rc = h_reg_sub_crq(adapter->vdev->unit_address, scrq->msg_token,
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Carlos Maiolino <[email protected]>
[ Upstream commit 8c81dd46ef3c416b3b95e3020fb90dbd44e6140b ]
Forcing the log to disk after reading the agf is wrong, we might be
calling xfs_log_force with XFS_LOG_SYNC with a metadata lock held.
This can cause a deadlock when racing a fstrim with a filesystem
shutdown.
The deadlock has been identified due a miscalculation bug in device-mapper
dm-thin, which returns lack of space to its users earlier than the device itself
really runs out of space, changing the device-mapper volume into an error state.
The problem happened while filling the filesystem with a single file,
triggering the bug in device-mapper, consequently causing an IO error
and shutting down the filesystem.
If such file is removed, and fstrim executed before the XFS finishes the
shut down process, the fstrim process will end up holding the buffer
lock, and going to sleep on the cil wait queue.
At this point, the shut down process will try to wake up all the threads
waiting on the cil wait queue, but for this, it will try to hold the
same buffer log already held my the fstrim, locking up the filesystem.
Signed-off-by: Carlos Maiolino <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/xfs_discard.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/fs/xfs/xfs_discard.c
+++ b/fs/xfs/xfs_discard.c
@@ -50,19 +50,19 @@ xfs_trim_extents(
pag = xfs_perag_get(mp, agno);
- error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
- if (error || !agbp)
- goto out_put_perag;
-
- cur = xfs_allocbt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_CNT);
-
/*
* Force out the log. This means any transactions that might have freed
- * space before we took the AGF buffer lock are now on disk, and the
+ * space before we take the AGF buffer lock are now on disk, and the
* volatile disk cache is flushed.
*/
xfs_log_force(mp, XFS_LOG_SYNC);
+ error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
+ if (error || !agbp)
+ goto out_put_perag;
+
+ cur = xfs_allocbt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_CNT);
+
/*
* Look up the longest btree in the AGF and start with it.
*/
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xidong Wang <[email protected]>
[ Upstream commit 1ec6995d1290bfb87cc3a51f0836c889e857cef9 ]
In z3fold_create_pool(), the memory allocated by __alloc_percpu() is not
released on the error path that pool->compact_wq , which holds the
return value of create_singlethread_workqueue(), is NULL. This will
result in a memory leak bug.
[[email protected]: fix oops on kzalloc() failure, check __alloc_percpu() retval]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Xidong Wang <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Vitaly Wool <[email protected]>
Cc: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/z3fold.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/mm/z3fold.c
+++ b/mm/z3fold.c
@@ -469,6 +469,8 @@ static struct z3fold_pool *z3fold_create
spin_lock_init(&pool->lock);
spin_lock_init(&pool->stale_lock);
pool->unbuddied = __alloc_percpu(sizeof(struct list_head)*NCHUNKS, 2);
+ if (!pool->unbuddied)
+ goto out_pool;
for_each_possible_cpu(cpu) {
struct list_head *unbuddied =
per_cpu_ptr(pool->unbuddied, cpu);
@@ -481,7 +483,7 @@ static struct z3fold_pool *z3fold_create
pool->name = name;
pool->compact_wq = create_singlethread_workqueue(pool->name);
if (!pool->compact_wq)
- goto out;
+ goto out_unbuddied;
pool->release_wq = create_singlethread_workqueue(pool->name);
if (!pool->release_wq)
goto out_wq;
@@ -491,8 +493,11 @@ static struct z3fold_pool *z3fold_create
out_wq:
destroy_workqueue(pool->compact_wq);
-out:
+out_unbuddied:
+ free_percpu(pool->unbuddied);
+out_pool:
kfree(pool);
+out:
return NULL;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Konovalov <[email protected]>
[ Upstream commit c3895391df385c6628638f014c87e16f5e2efd45 ]
The kasan_slab_free hook's return value denotes whether the reuse of a
slab object must be delayed (e.g. when the object is put into memory
qurantine).
The current way SLUB handles this hook is by ignoring its return value
and hardcoding checks similar (but not exactly the same) to the ones
performed in kasan_slab_free, which is prone to making mistakes.
The main difference between the hardcoded checks and the ones in
kasan_slab_free is whether we want to perform a free in case when an
invalid-free or a double-free was detected (we don't).
This patch changes the way SLUB handles this by:
1. taking into account the return value of kasan_slab_free for each of
the objects, that are being freed;
2. reconstructing the freelist of objects to exclude the ones, whose
reuse must be delayed.
[[email protected]: eliminate unnecessary branch in slab_free]
Link: http://lkml.kernel.org/r/a62759a2545fddf69b0c034547212ca1eb1b3ce2.1520359686.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/083f58501e54731203801d899632d76175868e97.1519400992.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <[email protected]>
Acked-by: Andrey Ryabinin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Kostya Serebryany <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slub.c | 57 ++++++++++++++++++++++++++++++++++-----------------------
1 file changed, 34 insertions(+), 23 deletions(-)
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1362,10 +1362,8 @@ static __always_inline void kfree_hook(v
kasan_kfree_large(x, _RET_IP_);
}
-static __always_inline void *slab_free_hook(struct kmem_cache *s, void *x)
+static __always_inline bool slab_free_hook(struct kmem_cache *s, void *x)
{
- void *freeptr;
-
kmemleak_free_recursive(x, s->flags);
/*
@@ -1385,17 +1383,12 @@ static __always_inline void *slab_free_h
if (!(s->flags & SLAB_DEBUG_OBJECTS))
debug_check_no_obj_freed(x, s->object_size);
- freeptr = get_freepointer(s, x);
- /*
- * kasan_slab_free() may put x into memory quarantine, delaying its
- * reuse. In this case the object's freelist pointer is changed.
- */
- kasan_slab_free(s, x, _RET_IP_);
- return freeptr;
+ /* KASAN might put x into memory quarantine, delaying its reuse */
+ return kasan_slab_free(s, x, _RET_IP_);
}
-static inline void slab_free_freelist_hook(struct kmem_cache *s,
- void *head, void *tail)
+static inline bool slab_free_freelist_hook(struct kmem_cache *s,
+ void **head, void **tail)
{
/*
* Compiler cannot detect this function can be removed if slab_free_hook()
@@ -1406,13 +1399,33 @@ static inline void slab_free_freelist_ho
defined(CONFIG_DEBUG_OBJECTS_FREE) || \
defined(CONFIG_KASAN)
- void *object = head;
- void *tail_obj = tail ? : head;
- void *freeptr;
+ void *object;
+ void *next = *head;
+ void *old_tail = *tail ? *tail : *head;
+
+ /* Head and tail of the reconstructed freelist */
+ *head = NULL;
+ *tail = NULL;
do {
- freeptr = slab_free_hook(s, object);
- } while ((object != tail_obj) && (object = freeptr));
+ object = next;
+ next = get_freepointer(s, object);
+ /* If object's reuse doesn't have to be delayed */
+ if (!slab_free_hook(s, object)) {
+ /* Move object to the new freelist */
+ set_freepointer(s, object, *head);
+ *head = object;
+ if (!*tail)
+ *tail = object;
+ }
+ } while (object != old_tail);
+
+ if (*head == *tail)
+ *tail = NULL;
+
+ return *head != NULL;
+#else
+ return true;
#endif
}
@@ -2965,14 +2978,12 @@ static __always_inline void slab_free(st
void *head, void *tail, int cnt,
unsigned long addr)
{
- slab_free_freelist_hook(s, head, tail);
/*
- * slab_free_freelist_hook() could have put the items into quarantine.
- * If so, no need to free them.
+ * With KASAN enabled slab_free_freelist_hook modifies the freelist
+ * to remove objects, whose reuse must be delayed.
*/
- if (s->flags & SLAB_KASAN && !(s->flags & SLAB_TYPESAFE_BY_RCU))
- return;
- do_slab_free(s, page, head, tail, cnt, addr);
+ if (slab_free_freelist_hook(s, &head, &tail))
+ do_slab_free(s, page, head, tail, cnt, addr);
}
#ifdef CONFIG_KASAN
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Konovalov <[email protected]>
[ Upstream commit 91c93ed07f04f5b32a30321d522d8ca9504745bf ]
When an invalid-free is triggered by one of the KASAN tests, the object
doesn't actually get freed. This later leads to a BUG failure in
kmem_cache_destroy that checks that there are no allocated objects in
the cache that is being destroyed.
Fix this by calling kmem_cache_free with the proper object address after
the call that triggers invalid-free.
Link: http://lkml.kernel.org/r/286eaefc0a6c3fa9b83b87e7d6dc0fbb5b5c9926.1519924383.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <[email protected]>
Acked-by: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Chris Mason <[email protected]>
Cc: Yury Norov <[email protected]>
Cc: Al Viro <[email protected]>
Cc: "Luis R . Rodriguez" <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: "Paul E . McKenney" <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: "Jason A . Donenfeld" <[email protected]>
Cc: Kostya Serebryany <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/test_kasan.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/lib/test_kasan.c
+++ b/lib/test_kasan.c
@@ -567,7 +567,15 @@ static noinline void __init kmem_cache_i
return;
}
+ /* Trigger invalid free, the object doesn't get freed */
kmem_cache_free(cache, p + 1);
+
+ /*
+ * Properly free the object to prevent the "Objects remaining in
+ * test_cache on __kmem_cache_shutdown" BUG failure.
+ */
+ kmem_cache_free(cache, p);
+
kmem_cache_destroy(cache);
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anshuman Khandual <[email protected]>
[ Upstream commit 709b973c844c0b4d115ac3a227a2e5a68722c912 ]
The function get_user() can sleep while trying to fetch instruction
from user address space and causes the following warning from the
scheduler.
BUG: sleeping function called from invalid context
Though interrupts get enabled back but it happens bit later after
get_user() is called. This change moves enabling these interrupts
earlier covering the function get_user(). While at this, lets check
for kernel mode and crash as this interrupt should not have been
triggered from the kernel context.
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/traps.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1612,6 +1612,22 @@ void facility_unavailable_exception(stru
value = mfspr(SPRN_FSCR);
status = value >> 56;
+ if ((hv || status >= 2) &&
+ (status < ARRAY_SIZE(facility_strings)) &&
+ facility_strings[status])
+ facility = facility_strings[status];
+
+ /* We should not have taken this interrupt in kernel */
+ if (!user_mode(regs)) {
+ pr_emerg("Facility '%s' unavailable (%d) exception in kernel mode at %lx\n",
+ facility, status, regs->nip);
+ die("Unexpected facility unavailable exception", regs, SIGABRT);
+ }
+
+ /* We restore the interrupt state now */
+ if (!arch_irq_disabled_regs(regs))
+ local_irq_enable();
+
if (status == FSCR_DSCR_LG) {
/*
* User is accessing the DSCR register using the problem
@@ -1678,25 +1694,11 @@ void facility_unavailable_exception(stru
return;
}
- if ((hv || status >= 2) &&
- (status < ARRAY_SIZE(facility_strings)) &&
- facility_strings[status])
- facility = facility_strings[status];
-
- /* We restore the interrupt state now */
- if (!arch_irq_disabled_regs(regs))
- local_irq_enable();
-
pr_err_ratelimited("%sFacility '%s' unavailable (%d), exception at 0x%lx, MSR=%lx\n",
hv ? "Hypervisor " : "", facility, status, regs->nip, regs->msr);
out:
- if (user_mode(regs)) {
- _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
- return;
- }
-
- die("Unexpected facility unavailable exception", regs, SIGABRT);
+ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
}
#endif
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tom Abraham <[email protected]>
[ Upstream commit a06ad633a37c64a0cd4c229fc605cee8725d376e ]
Calling swapon() on a zero length swap file on SSD can lead to a
divide-by-zero.
Although creating such files isn't possible with mkswap and they woud be
considered invalid, it would be better for the swapon code to be more
robust and handle this condition gracefully (return -EINVAL).
Especially since the fix is small and straightforward.
To help with wear leveling on SSD, the swapon syscall calculates a
random position in the swap file using modulo p->highest_bit, which is
set to maxpages - 1 in read_swap_header.
If the swap file is zero length, read_swap_header sets maxpages=1 and
last_page=0, resulting in p->highest_bit=0 and we divide-by-zero when we
modulo p->highest_bit in swapon syscall.
This can be prevented by having read_swap_header return zero if
last_page is zero.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Abraham <[email protected]>
Reported-by: <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/swapfile.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2961,6 +2961,10 @@ static unsigned long read_swap_header(st
maxpages = swp_offset(pte_to_swp_entry(
swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
last_page = swap_header->info.last_page;
+ if (!last_page) {
+ pr_warn("Empty swap-file\n");
+ return 0;
+ }
if (last_page > maxpages) {
pr_warn("Truncating oversized swap area, only using %luk out of %luk\n",
maxpages << (PAGE_SHIFT - 10),
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jean Delvare <[email protected]>
[ Upstream commit 90fe6f8ff00a07641ca893d64f75ca22ce77cca2 ]
The test which ensures that the DMI type 1 structure is long enough
to hold the UUID is off by one. It would fail if the structure is
exactly 24 bytes long, while that's sufficient to hold the UUID.
I don't expect this bug to cause problem in practice because all
implementations I have seen had length 8, 25 or 27 bytes, in line
with the SMBIOS specifications. But let's fix it still.
Signed-off-by: Jean Delvare <[email protected]>
Fixes: a814c3597a6b ("firmware: dmi_scan: Check DMI structure length")
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/dmi_scan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -186,7 +186,7 @@ static void __init dmi_save_uuid(const s
char *s;
int is_ff = 1, is_00 = 1, i;
- if (dmi_ident[slot] || dm->length <= index + 16)
+ if (dmi_ident[slot] || dm->length < index + 16)
return;
d = (u8 *) dm + index;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinath Mannam <[email protected]>
commit 4c94238f37af87a2165c3fb491b4a8b50e90649c upstream.
Remove hard coded mmc cap 1.8v from platform data as it is board specific.
The 1.8v DDR mmc caps can be enabled using DTS property for those
boards that support it.
Fixes: b17b4ab8ce38 ("mmc: sdhci-iproc: define MMC caps in platform data")
Signed-off-by: Srinath Mannam <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
Reviewed-by: Ray Jui <[email protected]>
Cc: [email protected] # v4.8+
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-iproc.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -206,7 +206,6 @@ static const struct sdhci_iproc_data ipr
.caps1 = SDHCI_DRIVER_TYPE_C |
SDHCI_DRIVER_TYPE_D |
SDHCI_SUPPORT_DDR50,
- .mmc_caps = MMC_CAP_1_8V_DDR,
};
static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corneliu Doban <[email protected]>
commit 5f651b870485ee60f5abbbd85195a6852978894a upstream.
When the host controller accepts only 32bit writes, the value of the
16bit TRANSFER_MODE register, that has the same 32bit address as the
16bit COMMAND register, needs to be saved and it will be written
in a 32bit write together with the command as this will trigger the
host to send the command on the SD interface.
When sending the tuning command, TRANSFER_MODE is written and then
sdhci_set_transfer_mode reads it back to clear AUTO_CMD12 bit and
write it again resulting in wrong value to be written because the
initial write value was saved in a shadow and the read-back returned
a wrong value, from the register.
Fix sdhci_iproc_readw to return the saved value of TRANSFER_MODE
when a saved value exist.
Same fix for read of BLOCK_SIZE and BLOCK_COUNT registers, that are
saved for a different reason, although a scenario that will cause the
mentioned problem on this registers is not probable.
Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Signed-off-by: Corneliu Doban <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
Cc: [email protected] # v4.1+
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-iproc.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -33,6 +33,8 @@ struct sdhci_iproc_host {
const struct sdhci_iproc_data *data;
u32 shadow_cmd;
u32 shadow_blk;
+ bool is_cmd_shadowed;
+ bool is_blk_shadowed;
};
#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
@@ -48,8 +50,22 @@ static inline u32 sdhci_iproc_readl(stru
static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
{
- u32 val = sdhci_iproc_readl(host, (reg & ~3));
- u16 word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
+ u32 val;
+ u16 word;
+
+ if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) {
+ /* Get the saved transfer mode */
+ val = iproc_host->shadow_cmd;
+ } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
+ iproc_host->is_blk_shadowed) {
+ /* Get the saved block info */
+ val = iproc_host->shadow_blk;
+ } else {
+ val = sdhci_iproc_readl(host, (reg & ~3));
+ }
+ word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
return word;
}
@@ -105,13 +121,15 @@ static void sdhci_iproc_writew(struct sd
if (reg == SDHCI_COMMAND) {
/* Write the block now as we are issuing a command */
- if (iproc_host->shadow_blk != 0) {
+ if (iproc_host->is_blk_shadowed) {
sdhci_iproc_writel(host, iproc_host->shadow_blk,
SDHCI_BLOCK_SIZE);
- iproc_host->shadow_blk = 0;
+ iproc_host->is_blk_shadowed = false;
}
oldval = iproc_host->shadow_cmd;
- } else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
+ iproc_host->is_cmd_shadowed = false;
+ } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
+ iproc_host->is_blk_shadowed) {
/* Block size and count are stored in shadow reg */
oldval = iproc_host->shadow_blk;
} else {
@@ -123,9 +141,11 @@ static void sdhci_iproc_writew(struct sd
if (reg == SDHCI_TRANSFER_MODE) {
/* Save the transfer mode until the command is issued */
iproc_host->shadow_cmd = newval;
+ iproc_host->is_cmd_shadowed = true;
} else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
/* Save the block info until the command is issued */
iproc_host->shadow_blk = newval;
+ iproc_host->is_blk_shadowed = true;
} else {
/* Command or other regular 32-bit write */
sdhci_iproc_writel(host, newval, reg & ~3);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafael J. Wysocki <[email protected]>
commit c62ec4610c40bcc44f2d3d5ed1c312737279e2f3 upstream.
Commit 08810a4119aa (PM / core: Add NEVER_SKIP and SMART_PREPARE
driver flags) inadvertently prevented the power.direct_complete flag
from being set for devices without PM callbacks and with disabled
runtime PM which also prevents power.direct_complete from being set
for their parents. That led to problems including a resume crash on
HP ZBook 14u.
Restore the previous behavior by causing power.direct_complete to be
set for those devices again, but do that in a more direct way to
avoid overlooking that case in the future.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199693
Fixes: 08810a4119aa (PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags)
Reported-by: Thomas Martitz <[email protected]>
Tested-by: Thomas Martitz <[email protected]>
Cc: 4.15+ <[email protected]> # 4.15+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/main.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1923,10 +1923,8 @@ static int device_prepare(struct device
dev->power.wakeup_path = false;
- if (dev->power.no_pm_callbacks) {
- ret = 1; /* Let device go direct_complete */
+ if (dev->power.no_pm_callbacks)
goto unlock;
- }
if (dev->pm_domain)
callback = dev->pm_domain->ops.prepare;
@@ -1960,7 +1958,8 @@ unlock:
*/
spin_lock_irq(&dev->power.lock);
dev->power.direct_complete = state.event == PM_EVENT_SUSPEND &&
- pm_runtime_suspended(dev) && ret > 0 &&
+ ((pm_runtime_suspended(dev) && ret > 0) ||
+ dev->power.no_pm_callbacks) &&
!dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP);
spin_unlock_irq(&dev->power.lock);
return 0;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 23d6aef74da86a33fa6bb75f79565e0a16ee97c2 upstream.
`resource' can be controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
Fix this by sanitizing *resource* before using it to index
current->signal->rlim
Notice that given that speculation windows are large, the policy is to
kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sys.c | 2 ++
1 file changed, 2 insertions(+)
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1401,6 +1401,7 @@ SYSCALL_DEFINE2(old_getrlimit, unsigned
if (resource >= RLIM_NLIMITS)
return -EINVAL;
+ resource = array_index_nospec(resource, RLIM_NLIMITS);
task_lock(current->group_leader);
x = current->signal->rlim[resource];
task_unlock(current->group_leader);
@@ -1420,6 +1421,7 @@ COMPAT_SYSCALL_DEFINE2(old_getrlimit, un
if (resource >= RLIM_NLIMITS)
return -EINVAL;
+ resource = array_index_nospec(resource, RLIM_NLIMITS);
task_lock(current->group_leader);
r = current->signal->rlim[resource];
task_unlock(current->group_leader);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit 3ae180972564846e6d794e3615e1ab0a1e6c4ef9 upstream.
Commit f65e0d299807 ("ALSA: timer: Call notifier in the same spinlock")
combined the start/continue and stop/pause functions, and in doing so
changed the event code for the pause case to SNDRV_TIMER_EVENT_CONTINUE.
Change it back to SNDRV_TIMER_EVENT_PAUSE.
Fixes: f65e0d299807 ("ALSA: timer: Call notifier in the same spinlock")
Signed-off-by: Ben Hutchings <[email protected]>
Cc: [email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/timer.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -592,7 +592,7 @@ static int snd_timer_stop1(struct snd_ti
else
timeri->flags |= SNDRV_TIMER_IFLG_PAUSED;
snd_timer_notify1(timeri, stop ? SNDRV_TIMER_EVENT_STOP :
- SNDRV_TIMER_EVENT_CONTINUE);
+ SNDRV_TIMER_EVENT_PAUSE);
unlock:
spin_unlock_irqrestore(&timer->lock, flags);
return result;
@@ -614,7 +614,7 @@ static int snd_timer_stop_slave(struct s
list_del_init(&timeri->ack_list);
list_del_init(&timeri->active_list);
snd_timer_notify1(timeri, stop ? SNDRV_TIMER_EVENT_STOP :
- SNDRV_TIMER_EVENT_CONTINUE);
+ SNDRV_TIMER_EVENT_PAUSE);
spin_unlock(&timeri->timer->lock);
}
spin_unlock_irqrestore(&slave_active_lock, flags);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Ryabinin <[email protected]>
commit 0f901dcbc31f88ae41a2aaa365f7802b5d520a28 upstream.
KASAN uses different routines to map shadow for hot added memory and
memory obtained in boot process. Attempt to offline memory onlined by
normal boot process leads to this:
Trying to vfree() nonexistent vm area (000000005d3b34b9)
WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190
Call Trace:
kasan_mem_notifier+0xad/0xb9
notifier_call_chain+0x166/0x260
__blocking_notifier_call_chain+0xdb/0x140
__offline_pages+0x96a/0xb10
memory_subsys_offline+0x76/0xc0
device_offline+0xb8/0x120
store_mem_state+0xfa/0x120
kernfs_fop_write+0x1d5/0x320
__vfs_write+0xd4/0x530
vfs_write+0x105/0x340
SyS_write+0xb0/0x140
Obviously we can't call vfree() to free memory that wasn't allocated via
vmalloc(). Use find_vm_area() to see if we can call vfree().
Unfortunately it's a bit tricky to properly unmap and free shadow
allocated during boot, so we'll have to keep it. If memory will come
online again that shadow will be reused.
Matthew asked: how can you call vfree() on something that isn't a
vmalloc address?
vfree() is able to free any address returned by
__vmalloc_node_range(). And __vmalloc_node_range() gives you any
address you ask. It doesn't have to be an address in [VMALLOC_START,
VMALLOC_END] range.
That's also how the module_alloc()/module_memfree() works on
architectures that have designated area for modules.
[[email protected]: improve comments]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: fix typos, reflow comment]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug")
Signed-off-by: Andrey Ryabinin <[email protected]>
Reported-by: Paul Menzel <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/kasan/kasan.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 61 insertions(+), 2 deletions(-)
--- a/mm/kasan/kasan.c
+++ b/mm/kasan/kasan.c
@@ -791,6 +791,40 @@ DEFINE_ASAN_SET_SHADOW(f5);
DEFINE_ASAN_SET_SHADOW(f8);
#ifdef CONFIG_MEMORY_HOTPLUG
+static bool shadow_mapped(unsigned long addr)
+{
+ pgd_t *pgd = pgd_offset_k(addr);
+ p4d_t *p4d;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ if (pgd_none(*pgd))
+ return false;
+ p4d = p4d_offset(pgd, addr);
+ if (p4d_none(*p4d))
+ return false;
+ pud = pud_offset(p4d, addr);
+ if (pud_none(*pud))
+ return false;
+
+ /*
+ * We can't use pud_large() or pud_huge(), the first one is
+ * arch-specific, the last one depends on HUGETLB_PAGE. So let's abuse
+ * pud_bad(), if pud is bad then it's bad because it's huge.
+ */
+ if (pud_bad(*pud))
+ return true;
+ pmd = pmd_offset(pud, addr);
+ if (pmd_none(*pmd))
+ return false;
+
+ if (pmd_bad(*pmd))
+ return true;
+ pte = pte_offset_kernel(pmd, addr);
+ return !pte_none(*pte);
+}
+
static int __meminit kasan_mem_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -812,6 +846,14 @@ static int __meminit kasan_mem_notifier(
case MEM_GOING_ONLINE: {
void *ret;
+ /*
+ * If shadow is mapped already than it must have been mapped
+ * during the boot. This could happen if we onlining previously
+ * offlined memory.
+ */
+ if (shadow_mapped(shadow_start))
+ return NOTIFY_OK;
+
ret = __vmalloc_node_range(shadow_size, PAGE_SIZE, shadow_start,
shadow_end, GFP_KERNEL,
PAGE_KERNEL, VM_NO_GUARD,
@@ -823,8 +865,25 @@ static int __meminit kasan_mem_notifier(
kmemleak_ignore(ret);
return NOTIFY_OK;
}
- case MEM_OFFLINE:
- vfree((void *)shadow_start);
+ case MEM_OFFLINE: {
+ struct vm_struct *vm;
+
+ /*
+ * shadow_start was either mapped during boot by kasan_init()
+ * or during memory online by __vmalloc_node_range().
+ * In the latter case we can use vfree() to free shadow.
+ * Non-NULL result of the find_vm_area() will tell us if
+ * that was the second case.
+ *
+ * Currently it's not possible to free shadow mapped
+ * during boot by kasan_init(). It's because the code
+ * to do that hasn't been written yet. So we'll just
+ * leak the memory.
+ */
+ vm = find_vm_area((void *)shadow_start);
+ if (vm)
+ vfree((void *)shadow_start);
+ }
}
return NOTIFY_OK;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davidlohr Bueso <[email protected]>
commit 8f89c007b6dec16a1793cb88de88fcc02117bbbc upstream.
shmat()'s SHM_REMAP option forbids passing a nil address for; this is in
fact the very first thing we check for. Andrea reported that for
SHM_RND|SHM_REMAP cases we can end up bypassing the initial addr check,
but we need to check again if the address was rounded down to nil. As
of this patch, such cases will return -EINVAL.
Link: http://lkml.kernel.org/r/20180503204934.kk63josdu6u53fbd@linux-n805
Signed-off-by: Davidlohr Bueso <[email protected]>
Reported-by: Andrea Arcangeli <[email protected]>
Cc: Joe Lawrence <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
ipc/shm.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -1320,9 +1320,17 @@ long do_shmat(int shmid, char __user *sh
if (addr) {
if (addr & (shmlba - 1)) {
- if (shmflg & SHM_RND)
+ if (shmflg & SHM_RND) {
addr &= ~(shmlba - 1); /* round down */
- else
+
+ /*
+ * Ensure that the round-down is non-nil
+ * when remapping. This can happen for
+ * cases when addr < shmlba.
+ */
+ if (!addr && (shmflg & SHM_REMAP))
+ goto out;
+ } else
#ifndef __ARCH_FORCE_SHMLBA
if (addr & ~PAGE_MASK)
#endif
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davidlohr Bueso <[email protected]>
commit a73ab244f0dad8fffb3291b905f73e2d3eaa7c00 upstream.
Patch series "ipc/shm: shmat() fixes around nil-page".
These patches fix two issues reported[1] a while back by Joe and Andrea
around how shmat(2) behaves with nil-page.
The first reverts a commit that it was incorrectly thought that mapping
nil-page (address=0) was a no no with MAP_FIXED. This is not the case,
with the exception of SHM_REMAP; which is address in the second patch.
I chose two patches because it is easier to backport and it explicitly
reverts bogus behaviour. Both patches ought to be in -stable and ltp
testcases need updated (the added testcase around the cve can be
modified to just test for SHM_RND|SHM_REMAP).
[1] lkml.kernel.org/r/20180430172152.nfa564pvgpk3ut7p@linux-n805
This patch (of 2):
Commit 95e91b831f87 ("ipc/shm: Fix shmat mmap nil-page protection")
worked on the idea that we should not be mapping as root addr=0 and
MAP_FIXED. However, it was reported that this scenario is in fact
valid, thus making the patch both bogus and breaks userspace as well.
For example X11's libint10.so relies on shmat(1, SHM_RND) for lowmem
initialization[1].
[1] https://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/os-support/linux/int10/linux.c#n347
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 95e91b831f87 ("ipc/shm: Fix shmat mmap nil-page protection")
Signed-off-by: Davidlohr Bueso <[email protected]>
Reported-by: Joe Lawrence <[email protected]>
Reported-by: Andrea Arcangeli <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
ipc/shm.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -1320,13 +1320,8 @@ long do_shmat(int shmid, char __user *sh
if (addr) {
if (addr & (shmlba - 1)) {
- /*
- * Round down to the nearest multiple of shmlba.
- * For sane do_mmap_pgoff() parameters, avoid
- * round downs that trigger nil-page and MAP_FIXED.
- */
- if ((shmflg & SHM_RND) && addr >= shmlba)
- addr &= ~(shmlba - 1);
+ if (shmflg & SHM_RND)
+ addr &= ~(shmlba - 1); /* round down */
else
#ifndef __ARCH_FORCE_SHMLBA
if (addr & ~PAGE_MASK)
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Wilcox <[email protected]>
commit 7a4deea1aa8bddfed4ef1b35fc2b6732563d8ad5 upstream.
If the radix tree underlying the IDR happens to be full and we attempt
to remove an id which is larger than any id in the IDR, we will call
__radix_tree_delete() with an uninitialised 'slot' pointer, at which
point anything could happen. This was easiest to hit with a single
entry at id 0 and attempting to remove a non-0 id, but it could have
happened with 64 entries and attempting to remove an id >= 64.
Roman said:
The syzcaller test boils down to opening /dev/kvm, creating an
eventfd, and calling a couple of KVM ioctls. None of this requires
superuser. And the result is dereferencing an uninitialized pointer
which is likely a crash. The specific path caught by syzbot is via
KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are
other user-triggerable paths, so cc:stable is probably justified.
Matthew added:
We have around 250 calls to idr_remove() in the kernel today. Many of
them pass an ID which is embedded in the object they're removing, so
they're safe. Picking a few likely candidates:
drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl.
drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar
drivers/atm/nicstar.c could be taken down by a handcrafted packet
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree")
Reported-by: <[email protected]>
Debugged-by: Roman Kagan <[email protected]>
Signed-off-by: Matthew Wilcox <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/radix-tree.c | 4 +++-
tools/testing/radix-tree/idr-test.c | 7 +++++++
2 files changed, 10 insertions(+), 1 deletion(-)
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -2034,10 +2034,12 @@ void *radix_tree_delete_item(struct radi
unsigned long index, void *item)
{
struct radix_tree_node *node = NULL;
- void __rcu **slot;
+ void __rcu **slot = NULL;
void *entry;
entry = __radix_tree_lookup(root, index, &node, &slot);
+ if (!slot)
+ return NULL;
if (!entry && (!is_idr(root) || node_tag_get(root, node, IDR_FREE,
get_slot_offset(node, slot))))
return NULL;
--- a/tools/testing/radix-tree/idr-test.c
+++ b/tools/testing/radix-tree/idr-test.c
@@ -252,6 +252,13 @@ void idr_checks(void)
idr_remove(&idr, 3);
idr_remove(&idr, 0);
+ assert(idr_alloc(&idr, DUMMY_PTR, 0, 0, GFP_KERNEL) == 0);
+ idr_remove(&idr, 1);
+ for (i = 1; i < RADIX_TREE_MAP_SIZE; i++)
+ assert(idr_alloc(&idr, DUMMY_PTR, 0, 0, GFP_KERNEL) == i);
+ idr_remove(&idr, 1 << 30);
+ idr_destroy(&idr);
+
for (i = INT_MAX - 3UL; i < INT_MAX + 1UL; i++) {
struct item *item = item_create(i, 0);
assert(idr_alloc(&idr, item, i, i + 10, GFP_KERNEL) == i);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lidong Chen <[email protected]>
commit 8e907ed4882714fd13cfe670681fc6cb5284c780 upstream.
User-space may invoke ibv_reg_mr and ibv_dereg_mr in different threads.
If ibv_dereg_mr is called after the thread which invoked ibv_reg_mr has
exited, get_pid_task will return NULL and ib_umem_release will not
decrease mm->pinned_vm.
Instead of using threads to locate the mm, use the overall tgid from the
ib_ucontext struct instead. This matches the behavior of ODP and
disassociate in handling the mm of the process that called ibv_reg_mr.
Cc: <[email protected]>
Fixes: 87773dd56d54 ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get")
Signed-off-by: Lidong Chen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/umem.c | 7 +------
include/rdma/ib_umem.h | 1 -
2 files changed, 1 insertion(+), 7 deletions(-)
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -119,7 +119,6 @@ struct ib_umem *ib_umem_get(struct ib_uc
umem->length = size;
umem->address = addr;
umem->page_shift = PAGE_SHIFT;
- umem->pid = get_task_pid(current, PIDTYPE_PID);
/*
* We ask for writable memory if any of the following
* access flags are set. "Local write" and "remote write"
@@ -132,7 +131,6 @@ struct ib_umem *ib_umem_get(struct ib_uc
IB_ACCESS_REMOTE_ATOMIC | IB_ACCESS_MW_BIND));
if (access & IB_ACCESS_ON_DEMAND) {
- put_pid(umem->pid);
ret = ib_umem_odp_get(context, umem, access);
if (ret) {
kfree(umem);
@@ -148,7 +146,6 @@ struct ib_umem *ib_umem_get(struct ib_uc
page_list = (struct page **) __get_free_page(GFP_KERNEL);
if (!page_list) {
- put_pid(umem->pid);
kfree(umem);
return ERR_PTR(-ENOMEM);
}
@@ -231,7 +228,6 @@ out:
if (ret < 0) {
if (need_release)
__ib_umem_release(context->device, umem, 0);
- put_pid(umem->pid);
kfree(umem);
} else
current->mm->pinned_vm = locked;
@@ -274,8 +270,7 @@ void ib_umem_release(struct ib_umem *ume
__ib_umem_release(umem->context->device, umem, 1);
- task = get_pid_task(umem->pid, PIDTYPE_PID);
- put_pid(umem->pid);
+ task = get_pid_task(umem->context->tgid, PIDTYPE_PID);
if (!task)
goto out;
mm = get_task_mm(task);
--- a/include/rdma/ib_umem.h
+++ b/include/rdma/ib_umem.h
@@ -48,7 +48,6 @@ struct ib_umem {
int writable;
int hugetlb;
struct work_struct work;
- struct pid *pid;
struct mm_struct *mm;
unsigned long diff;
struct ib_umem_odp *odp_data;
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael J. Ruhl <[email protected]>
commit f9e76ca3771bf23d2142a81a88ddd8f31f5c4c03 upstream.
A pio send egress error can occur when the PSM library attempts to
to send a bad packet. That issue is still being investigated.
The pio error interrupt handler then attempts to progress the recovery
of the errored pio send context.
Code inspection reveals that the handling lacks the necessary locking
if that recovery interleaves with a PSM close of the "context" object
contains the pio send context.
The lack of the locking can cause the recovery to access the already
freed pio send context object and incorrectly deduce that the pio
send context is actually a kernel pio send context as shown by the
NULL deref stack below:
[<ffffffff8143d78c>] _dev_info+0x6c/0x90
[<ffffffffc0613230>] sc_restart+0x70/0x1f0 [hfi1]
[<ffffffff816ab124>] ? __schedule+0x424/0x9b0
[<ffffffffc06133c5>] sc_halted+0x15/0x20 [hfi1]
[<ffffffff810aa3ba>] process_one_work+0x17a/0x440
[<ffffffff810ab086>] worker_thread+0x126/0x3c0
[<ffffffff810aaf60>] ? manage_workers.isra.24+0x2a0/0x2a0
[<ffffffff810b252f>] kthread+0xcf/0xe0
[<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40
[<ffffffff816b8798>] ret_from_fork+0x58/0x90
[<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40
This is the best case scenario and other scenarios can corrupt the
already freed memory.
Fix by adding the necessary locking in the pio send context error
handler.
Cc: <[email protected]> # 4.9.x
Reviewed-by: Mike Marciniszyn <[email protected]>
Reviewed-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/hfi1/chip.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -5944,6 +5944,7 @@ static void is_sendctxt_err_int(struct h
u64 status;
u32 sw_index;
int i = 0;
+ unsigned long irq_flags;
sw_index = dd->hw_to_sw[hw_context];
if (sw_index >= dd->num_send_contexts) {
@@ -5953,10 +5954,12 @@ static void is_sendctxt_err_int(struct h
return;
}
sci = &dd->send_contexts[sw_index];
+ spin_lock_irqsave(&dd->sc_lock, irq_flags);
sc = sci->sc;
if (!sc) {
dd_dev_err(dd, "%s: context %u(%u): no sc?\n", __func__,
sw_index, hw_context);
+ spin_unlock_irqrestore(&dd->sc_lock, irq_flags);
return;
}
@@ -5978,6 +5981,7 @@ static void is_sendctxt_err_int(struct h
*/
if (sc->type != SC_USER)
queue_work(dd->pport->hfi1_wq, &sc->halt_work);
+ spin_unlock_irqrestore(&dd->sc_lock, irq_flags);
/*
* Update the counters for the corresponding status bits.
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Hellstrom <[email protected]>
commit 938ae7259c908ad031da35d551da297640bb640c upstream.
Depending on whether the kernel is compiled with frame-pointer or not,
the temporary memory location used for the bp parameter in these macros
is referenced relative to the stack pointer or the frame pointer.
Hence we can never reference that parameter when we've modified either
the stack pointer or the frame pointer, because then the compiler would
generate an incorrect stack reference.
Fix this by pushing the temporary memory parameter on a known location on
the stack before modifying the stack- and frame pointers.
Cc: <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Brian Paul <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_msg.h | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.h
@@ -135,17 +135,24 @@
#else
-/* In the 32-bit version of this macro, we use "m" because there is no
- * more register left for bp
+/*
+ * In the 32-bit version of this macro, we store bp in a memory location
+ * because we've ran out of registers.
+ * Now we can't reference that memory location while we've modified
+ * %esp or %ebp, so we first push it on the stack, just before we push
+ * %ebp, and then when we need it we read it from the stack where we
+ * just pushed it.
*/
#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
port_num, magic, bp, \
eax, ebx, ecx, edx, si, di) \
({ \
- asm volatile ("push %%ebp;" \
- "mov %12, %%ebp;" \
+ asm volatile ("push %12;" \
+ "push %%ebp;" \
+ "mov 0x04(%%esp), %%ebp;" \
"rep outsb;" \
- "pop %%ebp;" : \
+ "pop %%ebp;" \
+ "add $0x04, %%esp;" : \
"=a"(eax), \
"=b"(ebx), \
"=c"(ecx), \
@@ -167,10 +174,12 @@
port_num, magic, bp, \
eax, ebx, ecx, edx, si, di) \
({ \
- asm volatile ("push %%ebp;" \
- "mov %12, %%ebp;" \
+ asm volatile ("push %12;" \
+ "push %%ebp;" \
+ "mov 0x04(%%esp), %%ebp;" \
"rep insb;" \
- "pop %%ebp" : \
+ "pop %%ebp;" \
+ "add $0x04, %%esp;" : \
"=a"(eax), \
"=b"(ebx), \
"=c"(ecx), \
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason A. Donenfeld <[email protected]>
commit 255845fc43a3aaf806852a1d3bc89bff1411ebe3 upstream.
Otherwise modules that use these arithmetic operations will fail to
link. We accomplish this with the usual EXPORT_SYMBOL, which on most
architectures goes in the .S file but the ARM64 maintainers prefer that
insead it goes into arm64ksyms.
While we're at it, we also fix this up to use SPDX, and I personally
choose to relicense this as GPL2||BSD so that these symbols don't need
to be export_symbol_gpl, so all modules can use the routines, since
these are important general purpose compiler-generated function calls.
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reported-by: PaX Team <[email protected]>
Cc: [email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/arm64ksyms.c | 8 ++++++++
arch/arm64/lib/tishift.S | 15 ++-------------
2 files changed, 10 insertions(+), 13 deletions(-)
--- a/arch/arm64/kernel/arm64ksyms.c
+++ b/arch/arm64/kernel/arm64ksyms.c
@@ -75,3 +75,11 @@ NOKPROBE_SYMBOL(_mcount);
/* arm-smccc */
EXPORT_SYMBOL(__arm_smccc_smc);
EXPORT_SYMBOL(__arm_smccc_hvc);
+
+ /* tishift.S */
+extern long long __ashlti3(long long a, int b);
+EXPORT_SYMBOL(__ashlti3);
+extern long long __ashrti3(long long a, int b);
+EXPORT_SYMBOL(__ashrti3);
+extern long long __lshrti3(long long a, int b);
+EXPORT_SYMBOL(__lshrti3);
--- a/arch/arm64/lib/tishift.S
+++ b/arch/arm64/lib/tishift.S
@@ -1,17 +1,6 @@
-/*
- * Copyright (C) 2017 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2017-2018 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
*/
#include <linux/linkage.h>
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <[email protected]>
commit 32c3fa7cdf0c4a3eb8405fc3e13398de019e828b upstream.
For LSE atomics that read and write a register operand, we need to
ensure that these operands are annotated as "early clobber" if the
register is written before all of the input operands have been consumed.
Failure to do so can result in the compiler allocating the same register
to both operands, leading to splats such as:
Unable to handle kernel paging request at virtual address 11111122222221
[...]
x1 : 1111111122222222 x0 : 1111111122222221
Process swapper/0 (pid: 1, stack limit = 0x000000008209f908)
Call trace:
test_atomic64+0x1360/0x155c
where x0 has been allocated as both the value to be stored and also the
atomic_t pointer.
This patch adds the missing clobbers.
Cc: <[email protected]>
Cc: Dave Martin <[email protected]>
Cc: Robin Murphy <[email protected]>
Reported-by: Mark Salter <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/atomic_lse.h | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -117,7 +117,7 @@ static inline void atomic_and(int i, ato
/* LSE atomics */
" mvn %w[i], %w[i]\n"
" stclr %w[i], %[v]")
- : [i] "+r" (w0), [v] "+Q" (v->counter)
+ : [i] "+&r" (w0), [v] "+Q" (v->counter)
: "r" (x1)
: __LL_SC_CLOBBERS);
}
@@ -135,7 +135,7 @@ static inline int atomic_fetch_and##name
/* LSE atomics */ \
" mvn %w[i], %w[i]\n" \
" ldclr" #mb " %w[i], %w[i], %[v]") \
- : [i] "+r" (w0), [v] "+Q" (v->counter) \
+ : [i] "+&r" (w0), [v] "+Q" (v->counter) \
: "r" (x1) \
: __LL_SC_CLOBBERS, ##cl); \
\
@@ -161,7 +161,7 @@ static inline void atomic_sub(int i, ato
/* LSE atomics */
" neg %w[i], %w[i]\n"
" stadd %w[i], %[v]")
- : [i] "+r" (w0), [v] "+Q" (v->counter)
+ : [i] "+&r" (w0), [v] "+Q" (v->counter)
: "r" (x1)
: __LL_SC_CLOBBERS);
}
@@ -180,7 +180,7 @@ static inline int atomic_sub_return##nam
" neg %w[i], %w[i]\n" \
" ldadd" #mb " %w[i], w30, %[v]\n" \
" add %w[i], %w[i], w30") \
- : [i] "+r" (w0), [v] "+Q" (v->counter) \
+ : [i] "+&r" (w0), [v] "+Q" (v->counter) \
: "r" (x1) \
: __LL_SC_CLOBBERS , ##cl); \
\
@@ -207,7 +207,7 @@ static inline int atomic_fetch_sub##name
/* LSE atomics */ \
" neg %w[i], %w[i]\n" \
" ldadd" #mb " %w[i], %w[i], %[v]") \
- : [i] "+r" (w0), [v] "+Q" (v->counter) \
+ : [i] "+&r" (w0), [v] "+Q" (v->counter) \
: "r" (x1) \
: __LL_SC_CLOBBERS, ##cl); \
\
@@ -314,7 +314,7 @@ static inline void atomic64_and(long i,
/* LSE atomics */
" mvn %[i], %[i]\n"
" stclr %[i], %[v]")
- : [i] "+r" (x0), [v] "+Q" (v->counter)
+ : [i] "+&r" (x0), [v] "+Q" (v->counter)
: "r" (x1)
: __LL_SC_CLOBBERS);
}
@@ -332,7 +332,7 @@ static inline long atomic64_fetch_and##n
/* LSE atomics */ \
" mvn %[i], %[i]\n" \
" ldclr" #mb " %[i], %[i], %[v]") \
- : [i] "+r" (x0), [v] "+Q" (v->counter) \
+ : [i] "+&r" (x0), [v] "+Q" (v->counter) \
: "r" (x1) \
: __LL_SC_CLOBBERS, ##cl); \
\
@@ -358,7 +358,7 @@ static inline void atomic64_sub(long i,
/* LSE atomics */
" neg %[i], %[i]\n"
" stadd %[i], %[v]")
- : [i] "+r" (x0), [v] "+Q" (v->counter)
+ : [i] "+&r" (x0), [v] "+Q" (v->counter)
: "r" (x1)
: __LL_SC_CLOBBERS);
}
@@ -377,7 +377,7 @@ static inline long atomic64_sub_return##
" neg %[i], %[i]\n" \
" ldadd" #mb " %[i], x30, %[v]\n" \
" add %[i], %[i], x30") \
- : [i] "+r" (x0), [v] "+Q" (v->counter) \
+ : [i] "+&r" (x0), [v] "+Q" (v->counter) \
: "r" (x1) \
: __LL_SC_CLOBBERS, ##cl); \
\
@@ -404,7 +404,7 @@ static inline long atomic64_fetch_sub##n
/* LSE atomics */ \
" neg %[i], %[i]\n" \
" ldadd" #mb " %[i], %[i], %[v]") \
- : [i] "+r" (x0), [v] "+Q" (v->counter) \
+ : [i] "+&r" (x0), [v] "+Q" (v->counter) \
: "r" (x1) \
: __LL_SC_CLOBBERS, ##cl); \
\
@@ -435,7 +435,7 @@ static inline long atomic64_dec_if_posit
" sub x30, x30, %[ret]\n"
" cbnz x30, 1b\n"
"2:")
- : [ret] "+r" (x0), [v] "+Q" (v->counter)
+ : [ret] "+&r" (x0), [v] "+Q" (v->counter)
:
: __LL_SC_CLOBBERS, "cc", "memory");
@@ -516,7 +516,7 @@ static inline long __cmpxchg_double##nam
" eor %[old1], %[old1], %[oldval1]\n" \
" eor %[old2], %[old2], %[oldval2]\n" \
" orr %[old1], %[old1], %[old2]") \
- : [old1] "+r" (x0), [old2] "+r" (x1), \
+ : [old1] "+&r" (x0), [old2] "+&r" (x1), \
[v] "+Q" (*(unsigned long *)ptr) \
: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4), \
[oldval1] "r" (oldval1), [oldval2] "r" (oldval2) \
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sudip Mukherjee <[email protected]>
commit 136d769e0b3475d71350aa3648a116a6ee7a8f6c upstream.
While whitelisting Micron M500DC drives, the tweaked blacklist entry
enabled queued TRIM from M500IT variants also. But these do not support
queued TRIM. And while using those SSDs with the latest kernel we have
seen errors and even the partition table getting corrupted.
Some part from the dmesg:
[ 6.727384] ata1.00: ATA-9: Micron_M500IT_MTFDDAK060MBD, MU01, max UDMA/133
[ 6.727390] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.741026] ata1.00: supports DRM functions and may not be fully accessible
[ 6.759887] ata1.00: configured for UDMA/133
[ 6.762256] scsi 0:0:0:0: Direct-Access ATA Micron_M500IT_MT MU01 PQ: 0 ANSI: 5
and then for the error:
[ 120.860334] ata1.00: exception Emask 0x1 SAct 0x7ffc0007 SErr 0x0 action 0x6 frozen
[ 120.860338] ata1.00: irq_stat 0x40000008
[ 120.860342] ata1.00: failed command: SEND FPDMA QUEUED
[ 120.860351] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x5 (timeout)
[ 120.860353] ata1.00: status: { DRDY }
[ 120.860543] ata1: hard resetting link
[ 121.166128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 121.166376] ata1.00: supports DRM functions and may not be fully accessible
[ 121.186238] ata1.00: supports DRM functions and may not be fully accessible
[ 121.204445] ata1.00: configured for UDMA/133
[ 121.204454] ata1.00: device reported invalid CHS sector 0
[ 121.204541] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 121.204546] sd 0:0:0:0: [sda] tag#18 Sense Key : 0x5 [current]
[ 121.204550] sd 0:0:0:0: [sda] tag#18 ASC=0x21 ASCQ=0x4
[ 121.204555] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x93 93 08 00 00 00 00 00 04 28 80 00 00 00 30 00 00
[ 121.204559] print_req_error: I/O error, dev sda, sector 272512
After few reboots with these errors, and the SSD is corrupted.
After blacklisting it, the errors are not seen and the SSD does not get
corrupted any more.
Fixes: 243918be6393 ("libata: Do not blacklist Micron M500DC")
Cc: Martin K. Petersen <[email protected]>
Cc: [email protected]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4557,6 +4557,8 @@ static const struct ata_blacklist_entry
{ "SanDisk SD7UB3Q*G1001", NULL, ATA_HORKAGE_NOLPM, },
/* devices that don't properly handle queued TRIM commands */
+ { "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 30da870ce4a4e007c901858a96e9e394a1daa74a upstream.
we unlock the directory hash too early - if we are looking at secondary
link and primary (in another directory) gets removed just as we unlock,
we could have the old primary moved in place of the secondary, leaving
us to look into freed entry (and leaving our dentry with ->d_fsdata
pointing to a freed entry).
Cc: [email protected] # 2.4.4+
Acked-by: David Sterba <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/affs/namei.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -206,9 +206,10 @@ affs_lookup(struct inode *dir, struct de
affs_lock_dir(dir);
bh = affs_find_entry(dir, dentry);
- affs_unlock_dir(dir);
- if (IS_ERR(bh))
+ if (IS_ERR(bh)) {
+ affs_unlock_dir(dir);
return ERR_CAST(bh);
+ }
if (bh) {
u32 ino = bh->b_blocknr;
@@ -222,10 +223,13 @@ affs_lookup(struct inode *dir, struct de
}
affs_brelse(bh);
inode = affs_iget(sb, ino);
- if (IS_ERR(inode))
+ if (IS_ERR(inode)) {
+ affs_unlock_dir(dir);
return ERR_CAST(inode);
+ }
}
d_add(dentry, inode);
+ affs_unlock_dir(dir);
return NULL;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <[email protected]>
commit 322579dcc865b94b47345ad1b6002ad167f85405 upstream.
Sandisk SSDs SD7SN6S256G and SD8SN8U256G are regularly locking up
regularly under sustained moderate load with NCQ enabled. Blacklist
for now.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Dave Jones <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-core.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4493,6 +4493,10 @@ static const struct ata_blacklist_entry
/* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
{ "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, },
+ /* Some Sandisk SSDs lock up hard with NCQ enabled. Reported on
+ SD7SN6S256G and SD8SN8U256G */
+ { "SanDisk SD[78]SN*G", NULL, ATA_HORKAGE_NONCQ, },
+
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 71e909c0cdad28a1df1fa14442929e68615dee45 upstream.
Correct commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
and expose the FIR register using the unused 4 bytes at the end of the
NT_PRFPREG regset. Without that register included clients cannot use
the PTRACE_GETREGSET request to retrieve the complete FPU register set
and have to resort to one of the older interfaces, either PTRACE_PEEKUSR
or PTRACE_GETFPREGS, to retrieve the missing piece of data. Also the
register is irreversibly missing from core dumps.
This register is architecturally hardwired and read-only so the write
path does not matter. Ignore data supplied on writes then.
Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 3.13+
Patchwork: https://patchwork.linux-mips.org/patch/19273/
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/ptrace.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -463,7 +463,7 @@ static int fpr_get_msa(struct task_struc
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer.
* Choose the appropriate helper for general registers, and then copy
- * the FCSR register separately.
+ * the FCSR and FIR registers separately.
*/
static int fpr_get(struct task_struct *target,
const struct user_regset *regset,
@@ -471,6 +471,7 @@ static int fpr_get(struct task_struct *t
void *kbuf, void __user *ubuf)
{
const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+ const int fir_pos = fcr31_pos + sizeof(u32);
int err;
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
@@ -483,6 +484,12 @@ static int fpr_get(struct task_struct *t
err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.fcr31,
fcr31_pos, fcr31_pos + sizeof(u32));
+ if (err)
+ return err;
+
+ err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &boot_cpu_data.fpu_id,
+ fir_pos, fir_pos + sizeof(u32));
return err;
}
@@ -531,7 +538,8 @@ static int fpr_set_msa(struct task_struc
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context.
* Choose the appropriate helper for general registers, and then copy
- * the FCSR register separately.
+ * the FCSR register separately. Ignore the incoming FIR register
+ * contents though, as the register is read-only.
*
* We optimize for the case where `count % sizeof(elf_fpreg_t) == 0',
* which is supposed to have been guaranteed by the kernel before
@@ -545,6 +553,7 @@ static int fpr_set(struct task_struct *t
const void *kbuf, const void __user *ubuf)
{
const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+ const int fir_pos = fcr31_pos + sizeof(u32);
u32 fcr31;
int err;
@@ -572,6 +581,11 @@ static int fpr_set(struct task_struct *t
ptrace_setfcr31(target, fcr31);
}
+ if (count > 0)
+ err = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+ fir_pos,
+ fir_pos + sizeof(u32));
+
return err;
}
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joe Jin <[email protected]>
commit 4855c92dbb7b3b85c23e88ab7ca04f99b9677b41 upstream.
When run raidconfig from Dom0 we found that the Xen DMA heap is reduced,
but Dom Heap is increased by the same size. Tracing raidconfig we found
that the related ioctl() in megaraid_sas will call dma_alloc_coherent()
to apply memory. If the memory allocated by Dom0 is not in the DMA area,
it will exchange memory with Xen to meet the requiment. Later drivers
call dma_free_coherent() to free the memory, on xen_swiotlb_free_coherent()
the check condition (dev_addr + size - 1 <= dma_mask) is always false,
it prevents calling xen_destroy_contiguous_region() to return the memory
to the Xen DMA heap.
This issue introduced by commit 6810df88dcfc2 "xen-swiotlb: When doing
coherent alloc/dealloc check before swizzling the MFNs.".
Signed-off-by: Joe Jin <[email protected]>
Tested-by: John Sobecki <[email protected]>
Reviewed-by: Rzeszutek Wilk <[email protected]>
Cc: [email protected]
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/swiotlb-xen.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -365,7 +365,7 @@ xen_swiotlb_free_coherent(struct device
* physical address */
phys = xen_bus_to_phys(dev_addr);
- if (((dev_addr + size - 1 > dma_mask)) ||
+ if (((dev_addr + size - 1 <= dma_mask)) ||
range_straddles_page_boundary(phys, size))
xen_destroy_contiguous_region(phys, order);
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <[email protected]>
commit ba3696e94d9d590d9a7e55f68e81c25dba515191 upstream.
Trivial fix to spelling mistake in debugfs_entries text.
Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM")
Signed-off-by: Colin Ian King <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # 3.10+
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kvm/mips.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -45,7 +45,7 @@ struct kvm_stats_debugfs_item debugfs_en
{ "cache", VCPU_STAT(cache_exits), KVM_STAT_VCPU },
{ "signal", VCPU_STAT(signal_exits), KVM_STAT_VCPU },
{ "interrupt", VCPU_STAT(int_exits), KVM_STAT_VCPU },
- { "cop_unsuable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
+ { "cop_unusable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
{ "tlbmod", VCPU_STAT(tlbmod_exits), KVM_STAT_VCPU },
{ "tlbmiss_ld", VCPU_STAT(tlbmiss_ld_exits), KVM_STAT_VCPU },
{ "tlbmiss_st", VCPU_STAT(tlbmiss_st_exits), KVM_STAT_VCPU },
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <[email protected]>
commit c60128ce97674fd05adb8b5ae79eb6745a03192e upstream.
The debug definitions were missing for MACH_JZ4770, resulting in a build
failure when DEBUG_ZBOOT was set.
Since the UART addresses are the same across all Ingenic SoCs, we just
use a #ifdef CONFIG_MACH_INGENIC instead of checking for individual
Ingenic SoCs.
Additionally, I added a #define for the UART0 address in-code and
dropped the <asm/mach-jz4740/base.h> include, for the reason that this
include file is slowly being phased out as the whole platform is being
moved to devicetree.
Fixes: 9be5f3e92ed5 ("MIPS: ingenic: Initial JZ4770 support")
Signed-off-by: Paul Cercueil <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.16
Patchwork: https://patchwork.linux-mips.org/patch/18957/
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/boot/compressed/uart-16550.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/mips/boot/compressed/uart-16550.c
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -18,9 +18,9 @@
#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
#endif
-#if defined(CONFIG_MACH_JZ4740) || defined(CONFIG_MACH_JZ4780)
-#include <asm/mach-jz4740/base.h>
-#define PORT(offset) (CKSEG1ADDR(JZ4740_UART0_BASE_ADDR) + (4 * offset))
+#ifdef CONFIG_MACH_INGENIC
+#define INGENIC_UART0_BASE_ADDR 0x10030000
+#define PORT(offset) (CKSEG1ADDR(INGENIC_UART0_BASE_ADDR) + (4 * offset))
#endif
#ifdef CONFIG_CPU_XLR
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Belloni <[email protected]>
commit 947bc875116042d5375446aa29bc1073c2d38977 upstream.
Commit b35565bb16a5 ("MIPS: generic: Add support for MIPSfpga") added
and its.S file for xilfpga but forgot to add it to
arch/mips/generic/Platform so it is never used.
Fixes: b35565bb16a5 ("MIPS: generic: Add support for MIPSfpga")
Signed-off-by: Alexandre Belloni <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.15+
Patchwork: https://patchwork.linux-mips.org/patch/19245/
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/generic/Platform | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/generic/Platform
+++ b/arch/mips/generic/Platform
@@ -16,3 +16,4 @@ all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz
its-y := vmlinux.its.S
its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S
its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S
4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Belloni <[email protected]>
commit a5a92abbce56c41ff121db41a33b9c0a0ff39365 upstream.
A dtb.o is generated from nexys4ddr.dts but this is never used since it
has been moved to mips/generic with commit b35565bb16a5 ("MIPS: generic:
Add support for MIPSfpga").
Fixes: b35565bb16a5 ("MIPS: generic: Add support for MIPSfpga")
Signed-off-by: Alexandre Belloni <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.15+
Patchwork: https://patchwork.linux-mips.org/patch/19244/
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/boot/dts/xilfpga/Makefile | 2 --
1 file changed, 2 deletions(-)
--- a/arch/mips/boot/dts/xilfpga/Makefile
+++ b/arch/mips/boot/dts/xilfpga/Makefile
@@ -1,4 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += nexys4ddr.dtb
-
-obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
On Mon, May 28, 2018 at 1:04 PM, Greg Kroah-Hartman
<[email protected]> wrote:
> 4.16-stable review patch. If anyone has any objections, please let me know.
>
I do not have objections for applying this patch to stable, but AFAIK
it is a correctness patch that doesn't fix any bug and it was mainly added
as a prerequisite to memcg accounting of event allocations, which is not
yet merged and not destined for stable.
Jan? do you agree with my statements above?
Thanks,
Amir.
> ------------------
>
> From: Jan Kara <[email protected]>
>
> [ Upstream commit 1f5eaa90010ed7cf0ae90a526c48657d02c6086f ]
>
> Fanotify queues of unlimited length do not expect events can be lost.
> Since these queues are used for system auditing and other security
> related tasks, loosing events can even have security implications.
> Currently, since the allocation is small (32-bytes), it cannot fail
> however when we start accounting events in memcgs, allocation can start
> failing. So avoid loosing events due to failure to allocate memory by
> making event allocation use __GFP_NOFAIL.
>
> Reviewed-by: Amir Goldstein <[email protected]>
> Signed-off-by: Jan Kara <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> ---
> fs/notify/fanotify/fanotify.c | 19 ++++++++++++++-----
> fs/notify/fanotify/fanotify.h | 3 ++-
> fs/notify/fanotify/fanotify_user.c | 2 +-
> 3 files changed, 17 insertions(+), 7 deletions(-)
>
> --- a/fs/notify/fanotify/fanotify.c
> +++ b/fs/notify/fanotify/fanotify.c
> @@ -135,23 +135,32 @@ static bool fanotify_should_send_event(s
> return false;
> }
>
> -struct fanotify_event_info *fanotify_alloc_event(struct inode *inode, u32 mask,
> +struct fanotify_event_info *fanotify_alloc_event(struct fsnotify_group *group,
> + struct inode *inode, u32 mask,
> const struct path *path)
> {
> struct fanotify_event_info *event;
> + gfp_t gfp = GFP_KERNEL;
> +
> + /*
> + * For queues with unlimited length lost events are not expected and
> + * can possibly have security implications. Avoid losing events when
> + * memory is short.
> + */
> + if (group->max_events == UINT_MAX)
> + gfp |= __GFP_NOFAIL;
>
> if (fanotify_is_perm_event(mask)) {
> struct fanotify_perm_event_info *pevent;
>
> - pevent = kmem_cache_alloc(fanotify_perm_event_cachep,
> - GFP_KERNEL);
> + pevent = kmem_cache_alloc(fanotify_perm_event_cachep, gfp);
> if (!pevent)
> return NULL;
> event = &pevent->fae;
> pevent->response = 0;
> goto init;
> }
> - event = kmem_cache_alloc(fanotify_event_cachep, GFP_KERNEL);
> + event = kmem_cache_alloc(fanotify_event_cachep, gfp);
> if (!event)
> return NULL;
> init: __maybe_unused
> @@ -206,7 +215,7 @@ static int fanotify_handle_event(struct
> return 0;
> }
>
> - event = fanotify_alloc_event(inode, mask, data);
> + event = fanotify_alloc_event(group, inode, mask, data);
> ret = -ENOMEM;
> if (unlikely(!event))
> goto finish;
> --- a/fs/notify/fanotify/fanotify.h
> +++ b/fs/notify/fanotify/fanotify.h
> @@ -52,5 +52,6 @@ static inline struct fanotify_event_info
> return container_of(fse, struct fanotify_event_info, fse);
> }
>
> -struct fanotify_event_info *fanotify_alloc_event(struct inode *inode, u32 mask,
> +struct fanotify_event_info *fanotify_alloc_event(struct fsnotify_group *group,
> + struct inode *inode, u32 mask,
> const struct path *path);
> --- a/fs/notify/fanotify/fanotify_user.c
> +++ b/fs/notify/fanotify/fanotify_user.c
> @@ -757,7 +757,7 @@ SYSCALL_DEFINE2(fanotify_init, unsigned
> group->fanotify_data.user = user;
> atomic_inc(&user->fanotify_listeners);
>
> - oevent = fanotify_alloc_event(NULL, FS_Q_OVERFLOW, NULL);
> + oevent = fanotify_alloc_event(group, NULL, FS_Q_OVERFLOW, NULL);
> if (unlikely(!oevent)) {
> fd = -ENOMEM;
> goto out_destroy_group;
>
>
On Mon 28-05-18 15:39:04, Amir Goldstein wrote:
> On Mon, May 28, 2018 at 1:04 PM, Greg Kroah-Hartman
> <[email protected]> wrote:
> > 4.16-stable review patch. If anyone has any objections, please let me know.
> >
>
> I do not have objections for applying this patch to stable, but AFAIK
> it is a correctness patch that doesn't fix any bug and it was mainly added
> as a prerequisite to memcg accounting of event allocations, which is not
> yet merged and not destined for stable.
>
> Jan? do you agree with my statements above?
Yes, you are correct. The problem this patch tries to fix is theoretical in
nature at this point. However my feeling is stable tree has got rather
benevolent in accepting patches in last months and Greg wishes it stays that
way so I'm objecting only to patches I know introduce regressions at this
point.
Honza
--
Jan Kara <[email protected]>
SUSE Labs, CR
On 28 May 2018 at 15:30, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 4.16.13 release.
> There are 272 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed May 30 10:01:02 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.13-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
> Davidlohr Bueso <[email protected]>
> ipc/shm: fix shmat() nil address after round-down when remapping
>
> Davidlohr Bueso <[email protected]>
> Revert "ipc/shm: Fix shmat mmap nil-page protection"
Regression on 4.16, 4,14, 4.9 and 4.4 and all devices.
Regressions (compared to build v4.16.12)
------------------------------------------------------------------------
On all devices,
ltp-syscalls-tests:
* cve-2017-5669
ltp-cve-tests:
* cve-2017-5669
Test log:
------------
cve-2017-5669.c:62: INFO: Attempting to attach shared memory to null page
cve-2017-5669.c:74: INFO: Mapped shared memory to (nil)
cve-2017-5669.c:78: FAIL: We have mapped a VM address within the first 64Kb
cve-2017-5669.c:84: INFO: Touching shared memory to see if anything
strange happens
Summary:
passed 0
failed 1
skipped 0
warnings 0
The root cause is,
"Revert "ipc/shm: Fix shmat mmap nil-page protection"",
which explicitly rolls back the original change and mentions that
the LTP test case needs to be updated accordingly.
This regression initially detected on 4.17.0-rc5-next-20180516
Need more investigation on this issue.
Ref:
LKFT: next: LTS-4.16,4.14 and 4.9: LTP test case cve-2017-5669 failed on
all devices
https://bugs.linaro.org/show_bug.cgi?id=3835
https://bugzilla.kernel.org/show_bug.cgi?id=192931
https://patchwork.kernel.org/patch/9552307/
Best regards
Naresh Kamboju
On Tue, 29 May 2018, Naresh Kamboju wrote:
>On 28 May 2018 at 15:30, Greg Kroah-Hartman <[email protected]> wrote:
>On all devices,
> ltp-syscalls-tests:
> * cve-2017-5669
>
> ltp-cve-tests:
> * cve-2017-5669
>
>Test log:
>------------
>cve-2017-5669.c:62: INFO: Attempting to attach shared memory to null page
>cve-2017-5669.c:74: INFO: Mapped shared memory to (nil)
>cve-2017-5669.c:78: FAIL: We have mapped a VM address within the first 64Kb
>cve-2017-5669.c:84: INFO: Touching shared memory to see if anything
>strange happens
>Summary:
>passed 0
>failed 1
>skipped 0
>warnings 0
>
>
>The root cause is,
>"Revert "ipc/shm: Fix shmat mmap nil-page protection"",
>which explicitly rolls back the original change and mentions that
>the LTP test case needs to be updated accordingly.
This is expected in that the ltp testcase was made based on wrong assumptions.
Furthermore, the reversion is being done because without it we breaks userspace;
X11 most noticeably -- that alone indicates that the cve testcase is bogus.
>
>This regression initially detected on 4.17.0-rc5-next-20180516
>Need more investigation on this issue.
The correct way of proceeding is to update the ltp testcase to deal with the
remap option only, which I mentioned and they are Cc'ed.
Thanks,
Davidlohr
On 05/28/2018 03:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.16.13 release.
> There are 272 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed May 30 10:01:02 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 143 pass: 143 fail: 0
Qemu test results:
total: 141 pass: 141 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On 28 May 2018 at 15:30, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 4.16.13 release.
> There are 272 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed May 30 10:01:02 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.13-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.
NOTE:
The failed LTP test case "cve-2017-5669" is a waiver here.
Summary
------------------------------------------------------------------------
kernel: 4.16.13-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.16.y
git commit: ca67f014e67013cd3d8312e68d2967332dae8654
git describe: v4.16.12-273-gca67f014e670
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.16-oe/build/v4.16.12-273-gca67f014e670
No regressions (compared to build v4.16.12-271-g2cb370dedebb)
Ran 10312 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-fcntl-locktests-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-timers-tests
* ltp-cve-tests
* ltp-filecaps-tests
* ltp-syscalls-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On Mon, May 28, 2018 at 02:52:57PM +0200, Jan Kara wrote:
> On Mon 28-05-18 15:39:04, Amir Goldstein wrote:
> > On Mon, May 28, 2018 at 1:04 PM, Greg Kroah-Hartman
> > <[email protected]> wrote:
> > > 4.16-stable review patch. If anyone has any objections, please let me know.
> > >
> >
> > I do not have objections for applying this patch to stable, but AFAIK
> > it is a correctness patch that doesn't fix any bug and it was mainly added
> > as a prerequisite to memcg accounting of event allocations, which is not
> > yet merged and not destined for stable.
> >
> > Jan? do you agree with my statements above?
>
> Yes, you are correct. The problem this patch tries to fix is theoretical in
> nature at this point. However my feeling is stable tree has got rather
> benevolent in accepting patches in last months and Greg wishes it stays that
> way so I'm objecting only to patches I know introduce regressions at this
> point.
I am getting "more benevolent", but the patch should be there for at
least some good reason. This one was picked by the "semi-automatic"
checker, and at first glance seems like it is a real bugfix. But, as
you mention, it was only needed in preparation for a future patch, then
this patch is not needed in the stable trees, and I'll go drop it now.
thanks,
greg k-h
On Tue, May 29, 2018 at 10:55:34AM +0530, Naresh Kamboju wrote:
> On 28 May 2018 at 15:30, Greg Kroah-Hartman <[email protected]> wrote:
> > This is the start of the stable review cycle for the 4.16.13 release.
> > There are 272 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed May 30 10:01:02 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.13-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm and x86_64.
>
> NOTE:
> The failed LTP test case "cve-2017-5669" is a waiver here.
Thanks for figuring that one out :)
Also, thanks for testing all of these and letting me know.
greg k-h
On Mon, May 28, 2018 at 05:46:26PM -0700, Guenter Roeck wrote:
> On 05/28/2018 03:00 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.16.13 release.
> > There are 272 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed May 30 10:01:02 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 143 pass: 143 fail: 0
> Qemu test results:
> total: 141 pass: 141 fail: 0
>
> Details are available at http://kerneltests.org/builders.
Wonderful, everything passed. Thanks for testing all of these and
letting me know.
greg k-h
The following bug has been opened for LTP:
https://github.com/linux-test-project/ltp/issues/319
for the CVE-2017-5669's wrong assumptions (based on Davidlohr's work).
I'll change the test to cover both scenarios and expect the right results from them.
> On 29 May 2018, at 04:08, Greg Kroah-Hartman <[email protected]> wrote:
>
> On Tue, May 29, 2018 at 10:55:34AM +0530, Naresh Kamboju wrote:
>> On 28 May 2018 at 15:30, Greg Kroah-Hartman <[email protected]> wrote:
>>> This is the start of the stable review cycle for the 4.16.13 release.
>>> There are 272 patches in this series, all will be posted as a response
>>> to this one. If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Wed May 30 10:01:02 UTC 2018.
>>> Anything received after that time might be too late.
>>>
>>> The whole patch series can be found in one patch at:
>>> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.13-rc1.gz
>>> or in the git tree and branch at:
>>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
>>> and the diffstat can be found below.
>>>
>>> thanks,
>>>
>>> greg k-h
>>
>> Results from Linaro’s test farm.
>> No regressions on arm64, arm and x86_64.
>>
>> NOTE:
>> The failed LTP test case "cve-2017-5669" is a waiver here.
>
> Thanks for figuring that one out :)
>
> Also, thanks for testing all of these and letting me know.
On 05/28/2018 04:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.16.13 release.
> There are 272 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed May 30 10:01:02 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.13-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Tue, May 29, 2018 at 01:52:12PM -0600, Shuah Khan wrote:
> On 05/28/2018 04:00 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.16.13 release.
> > There are 272 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed May 30 10:01:02 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.16.13-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.16.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h
Am 28.05.2018 um 12:05 schrieb Greg Kroah-Hartman:
> 4.16-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Bjorn Andersson <[email protected]>
>
> [ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ]
>
> The base of the TLMM gpiochip should not be statically defined as 0, fix
> this to not artificially restrict the existence of multiple pinctrl-msm
> devices.
>
> Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
> Reported-by: Timur Tabi <[email protected]>
> Signed-off-by: Bjorn Andersson <[email protected]>
> Signed-off-by: Linus Walleij <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> ---
> drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -818,7 +818,7 @@ static int msm_gpio_init(struct msm_pinc
> return -EINVAL;
>
> chip = &pctrl->chip;
> - chip->base = 0;
> + chip->base = -1;
> chip->ngpio = ngpio;
> chip->label = dev_name(pctrl->dev);
> chip->parent = pctrl->dev;
this patch creates a regression for me. on ipq8064 the systems gpios now
start somewhere in the sky
new layout
lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip373 ->
../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip373
lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip408 ->
../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip408
lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip443 ->
../../devices/platform/soc/800000.pinmux/gpio/gpiochip443
before the patch
lrwxrwxrwx 1 root root 0 Jan 1 1970 gpiochip0 ->
../../devices/platform/soc/800000.pinmux/gpio/gpiochip0
lrwxrwxrwx 1 root root 0 May 31 13:13 gpiochip442 ->
../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip442
lrwxrwxrwx 1 root root 0 May 31 13:13 gpiochip477 ->
../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip477
this broke my userspace gpio handling. i can override this, but still it
doesnt look correct since there is a hole at the beginng likelly
reserved by unused arm gpios
>
>
>
On Thu, May 31, 2018 at 01:21:56PM +0200, Sebastian Gottschall wrote:
> Am 28.05.2018 um 12:05 schrieb Greg Kroah-Hartman:
> > 4.16-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Bjorn Andersson <[email protected]>
> >
> > [ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ]
> >
> > The base of the TLMM gpiochip should not be statically defined as 0, fix
> > this to not artificially restrict the existence of multiple pinctrl-msm
> > devices.
> >
> > Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
> > Reported-by: Timur Tabi <[email protected]>
> > Signed-off-by: Bjorn Andersson <[email protected]>
> > Signed-off-by: Linus Walleij <[email protected]>
> > Signed-off-by: Sasha Levin <[email protected]>
> > Signed-off-by: Greg Kroah-Hartman <[email protected]>
> > ---
> > drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> > +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> > @@ -818,7 +818,7 @@ static int msm_gpio_init(struct msm_pinc
> > return -EINVAL;
> > chip = &pctrl->chip;
> > - chip->base = 0;
> > + chip->base = -1;
> > chip->ngpio = ngpio;
> > chip->label = dev_name(pctrl->dev);
> > chip->parent = pctrl->dev;
>
> this patch creates a regression for me. on ipq8064 the systems gpios now
> start somewhere in the sky
>
> new layout
>
> lrwxrwxrwx??? 1 root???? root???????????? 0 Jan? 1 00:00 gpiochip373 -> ../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip373
> lrwxrwxrwx??? 1 root???? root???????????? 0 Jan? 1 00:00 gpiochip408 -> ../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip408
> lrwxrwxrwx??? 1 root???? root???????????? 0 Jan? 1 00:00 gpiochip443 ->
> ../../devices/platform/soc/800000.pinmux/gpio/gpiochip443
>
>
> before the patch
>
> lrwxrwxrwx??? 1 root???? root???????????? 0 Jan? 1? 1970 gpiochip0 ->
> ../../devices/platform/soc/800000.pinmux/gpio/gpiochip0
> lrwxrwxrwx??? 1 root???? root???????????? 0 May 31 13:13 gpiochip442 -> ../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip442
> lrwxrwxrwx??? 1 root???? root???????????? 0 May 31 13:13 gpiochip477 -> ../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip477
>
>
> this broke my userspace gpio handling. i can override this, but still it
> doesnt look correct since there is a hole at the beginng likelly reserved by
> unused arm gpios
So does this mean that 4.17-rc is also broken for you? If so, this
needs to be reverted there as well.
Bjorn, any ideas?
thanks,
greg k-h
Am 31.05.2018 um 13:45 schrieb Greg Kroah-Hartman:
> On Thu, May 31, 2018 at 01:21:56PM +0200, Sebastian Gottschall wrote:
>> Am 28.05.2018 um 12:05 schrieb Greg Kroah-Hartman:
>>> 4.16-stable review patch. If anyone has any objections, please let me know.
>>>
>>> ------------------
>>>
>>> From: Bjorn Andersson <[email protected]>
>>>
>>> [ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ]
>>>
>>> The base of the TLMM gpiochip should not be statically defined as 0, fix
>>> this to not artificially restrict the existence of multiple pinctrl-msm
>>> devices.
>>>
>>> Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
>>> Reported-by: Timur Tabi <[email protected]>
>>> Signed-off-by: Bjorn Andersson <[email protected]>
>>> Signed-off-by: Linus Walleij <[email protected]>
>>> Signed-off-by: Sasha Levin <[email protected]>
>>> Signed-off-by: Greg Kroah-Hartman <[email protected]>
>>> ---
>>> drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
>>> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
>>> @@ -818,7 +818,7 @@ static int msm_gpio_init(struct msm_pinc
>>> return -EINVAL;
>>> chip = &pctrl->chip;
>>> - chip->base = 0;
>>> + chip->base = -1;
>>> chip->ngpio = ngpio;
>>> chip->label = dev_name(pctrl->dev);
>>> chip->parent = pctrl->dev;
>> this patch creates a regression for me. on ipq8064 the systems gpios now
>> start somewhere in the sky
>>
>> new layout
>>
>> lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip373 -> ../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip373
>> lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip408 -> ../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip408
>> lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip443 ->
>> ../../devices/platform/soc/800000.pinmux/gpio/gpiochip443
>>
>>
>> before the patch
>>
>> lrwxrwxrwx 1 root root 0 Jan 1 1970 gpiochip0 ->
>> ../../devices/platform/soc/800000.pinmux/gpio/gpiochip0
>> lrwxrwxrwx 1 root root 0 May 31 13:13 gpiochip442 -> ../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip442
>> lrwxrwxrwx 1 root root 0 May 31 13:13 gpiochip477 -> ../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip477
>>
>>
>> this broke my userspace gpio handling. i can override this, but still it
>> doesnt look correct since there is a hole at the beginng likelly reserved by
>> unused arm gpios
> So does this mean that 4.17-rc is also broken for you? If so, this
> needs to be reverted there as well.
>
> Bjorn, any ideas?
>
> thanks,
>
> greg k-h
i checked initially 4.9 with latest patches and 4.14 and reverted this
line to get back to the old behaviour but a which view in the current
4.17 tree shows
that the same patch has been included in 4.17. it was introduced in the
kernel mainline on 12.feb 2018
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pinctrl/qcom/pinctrl-msm.c?h=v4.17-rc7&id=a7aa75a2a7dba32594291a71c3704000a2fd7089
>
On 5/31/18 6:53 AM, Sebastian Gottschall wrote:
>>
> i checked initially 4.9 with latest patches and 4.14 and reverted this
> line to get back to the old behaviour but a which view in the current
> 4.17 tree shows
> that the same patch has been included in 4.17. it was introduced in the
> kernel mainline on 12.feb 2018
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pinctrl/qcom/pinctrl-msm.c?h=v4.17-rc7&id=a7aa75a2a7dba32594291a71c3704000a2fd7089
I believe that this patch should not be applied to *any* stable kernel.
It completely breaks legacy GPIO numbering, and it does so
intentionally. That may be okay for future kernels, but IMHO it's wrong
for older kernels.
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
On Thu, May 31, 2018 at 06:55:55AM -0500, Timur Tabi wrote:
> On 5/31/18 6:53 AM, Sebastian Gottschall wrote:
> > >
> > i checked initially 4.9 with latest patches and 4.14 and reverted this
> > line to get back to the old behaviour but a which view in the current
> > 4.17?tree?shows
> > that the same patch has been included in 4.17. it was introduced in the
> > kernel?mainline?on?12.feb?2018
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pinctrl/qcom/pinctrl-msm.c?h=v4.17-rc7&id=a7aa75a2a7dba32594291a71c3704000a2fd7089
>
> I believe that this patch should not be applied to *any* stable kernel.
>
> It completely breaks legacy GPIO numbering, and it does so intentionally.
> That may be okay for future kernels, but IMHO it's wrong for older kernels.
Why is it somehow ok for "future" kernels? You can't break the api in
the future for no reason.
So this needs to be the same everywhere. If it is broken in 4.17-rc, it
needs to be reverted.
thanks,
greg k-h
Am 31.05.2018 um 14:12 schrieb Greg Kroah-Hartman:
> On Thu, May 31, 2018 at 06:55:55AM -0500, Timur Tabi wrote:
>> On 5/31/18 6:53 AM, Sebastian Gottschall wrote:
>>> i checked initially 4.9 with latest patches and 4.14 and reverted this
>>> line to get back to the old behaviour but a which view in the current
>>> 4.17 tree shows
>>> that the same patch has been included in 4.17. it was introduced in the
>>> kernel mainline on 12.feb 2018
>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/pinctrl/qcom/pinctrl-msm.c?h=v4.17-rc7&id=a7aa75a2a7dba32594291a71c3704000a2fd7089
>> I believe that this patch should not be applied to *any* stable kernel.
>>
>> It completely breaks legacy GPIO numbering, and it does so intentionally.
>> That may be okay for future kernels, but IMHO it's wrong for older kernels.
> Why is it somehow ok for "future" kernels? You can't break the api in
> the future for no reason.
>
> So this needs to be the same everywhere. If it is broken in 4.17-rc, it
> needs to be reverted.
>
> thanks,
>
> greg k-h
i agree. i understand the reason why it was introduced, but the reason
was a very special case which can be handled in a different way or
specific for the affected architecture / device
and this patch alone cannot be introduced without further changes to
device tree files which may assign those gpio numbers
i2c, leds etc. (a quick review of the current device tree files for qcom
already showed me that they are likelly broken because of this change)
Sebastian
>
On 5/31/18 7:12 AM, Greg Kroah-Hartman wrote:
> Why is it somehow ok for "future" kernels? You can't break the api in
> the future for no reason.
>
> So this needs to be the same everywhere. If it is broken in 4.17-rc, it
> needs to be reverted.
This was discussed here:
https://www.spinics.net/lists/linux-arm-msm/msg32572.html
The code can't program the value to 0 *and* support multiple TLMM
devices at the same time. Prior to 4.18, it is not possible to support
multiple TLMMs anyway, so blindly setting the base to -1 in the 4.17
kernel just breaks existing user-space code that uses the legacy GPIO API.
(This patch in 4.18 is what provides support for multiple TLMMs:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/pinctrl/qcom?id=f265e8b91bb50c7a732a171ddaeb0eef143bacd9)
So you can see in the thread that I proposed a compromise:
https://www.spinics.net/lists/linux-arm-msm/msg32596.html
but that was rejected
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
On Thu, May 31, 2018 at 10:09:50AM -0500, Timur Tabi wrote:
> On 5/31/18 7:12 AM, Greg Kroah-Hartman wrote:
> > Why is it somehow ok for "future" kernels? You can't break the api in
> > the future for no reason.
> >
> > So this needs to be the same everywhere. If it is broken in 4.17-rc, it
> > needs to be reverted.
>
> This was discussed here:
>
> https://www.spinics.net/lists/linux-arm-msm/msg32572.html
>
> The code can't program the value to 0 *and* support multiple TLMM devices at
> the same time. Prior to 4.18, it is not possible to support multiple TLMMs
> anyway, so blindly setting the base to -1 in the 4.17 kernel just breaks
> existing user-space code that uses the legacy GPIO API.
>
> (This patch in 4.18 is what provides support for multiple TLMMs: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/pinctrl/qcom?id=f265e8b91bb50c7a732a171ddaeb0eef143bacd9)
>
> So you can see in the thread that I proposed a compromise:
>
> https://www.spinics.net/lists/linux-arm-msm/msg32596.html
>
> but that was rejected
Ugh, ok, you all have fun with this :(
I've reverted it from all of the stable trees, again, sorry for it
coming back.
greg k-h
On Thu 31 May 04:45 PDT 2018, Greg Kroah-Hartman wrote:
> On Thu, May 31, 2018 at 01:21:56PM +0200, Sebastian Gottschall wrote:
> > Am 28.05.2018 um 12:05 schrieb Greg Kroah-Hartman:
> > > 4.16-stable review patch. If anyone has any objections, please let me know.
> > >
> > > ------------------
> > >
> > > From: Bjorn Andersson <[email protected]>
> > >
> > > [ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ]
> > >
> > > The base of the TLMM gpiochip should not be statically defined as 0, fix
> > > this to not artificially restrict the existence of multiple pinctrl-msm
> > > devices.
> > >
> > > Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
> > > Reported-by: Timur Tabi <[email protected]>
> > > Signed-off-by: Bjorn Andersson <[email protected]>
> > > Signed-off-by: Linus Walleij <[email protected]>
> > > Signed-off-by: Sasha Levin <[email protected]>
> > > Signed-off-by: Greg Kroah-Hartman <[email protected]>
> > > ---
> > > drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> > > +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> > > @@ -818,7 +818,7 @@ static int msm_gpio_init(struct msm_pinc
> > > return -EINVAL;
> > > chip = &pctrl->chip;
> > > - chip->base = 0;
> > > + chip->base = -1;
> > > chip->ngpio = ngpio;
> > > chip->label = dev_name(pctrl->dev);
> > > chip->parent = pctrl->dev;
> >
> > this patch creates a regression for me. on ipq8064 the systems gpios now
> > start somewhere in the sky
> >
> > new layout
> >
> > lrwxrwxrwx??? 1 root???? root???????????? 0 Jan? 1 00:00 gpiochip373 -> ../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip373
> > lrwxrwxrwx??? 1 root???? root???????????? 0 Jan? 1 00:00 gpiochip408 -> ../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip408
> > lrwxrwxrwx??? 1 root???? root???????????? 0 Jan? 1 00:00 gpiochip443 ->
> > ../../devices/platform/soc/800000.pinmux/gpio/gpiochip443
> >
> >
> > before the patch
> >
> > lrwxrwxrwx??? 1 root???? root???????????? 0 Jan? 1? 1970 gpiochip0 ->
> > ../../devices/platform/soc/800000.pinmux/gpio/gpiochip0
> > lrwxrwxrwx??? 1 root???? root???????????? 0 May 31 13:13 gpiochip442 -> ../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip442
> > lrwxrwxrwx??? 1 root???? root???????????? 0 May 31 13:13 gpiochip477 -> ../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip477
> >
> >
> > this broke my userspace gpio handling. i can override this, but still it
> > doesnt look correct since there is a hole at the beginng likelly reserved by
> > unused arm gpios
>
> So does this mean that 4.17-rc is also broken for you? If so, this
> needs to be reverted there as well.
>
> Bjorn, any ideas?
>
The Qualcomm TLMM (pinctrl) driver was introduced long after it was
decided that the kernel should not rely on global/static gpio numbering.
But due to a mistake on my part the dynamic gpio base for this gpiochip
was always 0, which the offending patch corrects.
So writing user space code relying on the gpio numbering for this chip
has always been incorrect, just as it is for the other two gpiochips
listed above.
The original objection for backporting this patch was a touchscreen
driver stopped working on 4.4, but the driver clearly doesn't depend on
global or static numbering of gpios. I don't think this was ever root
caused.
I guess the pragmatic approach would be to come up with something like
Timur's suggested fix that makes the first instance of this driver use
base = 0 and then use dynamic numbering for the rest, to maintain
support for this incorrect usage of the gpio sysfs interface. (Although
that would probably break if Timur's customers move their user space to
the new platform as "the first instance" isn't deterministic).
Regards,
Bjorn
Am 31.05.2018 um 18:57 schrieb Bjorn Andersson:
> On Thu 31 May 04:45 PDT 2018, Greg Kroah-Hartman wrote:
>
>> On Thu, May 31, 2018 at 01:21:56PM +0200, Sebastian Gottschall wrote:
>>> Am 28.05.2018 um 12:05 schrieb Greg Kroah-Hartman:
>>>> 4.16-stable review patch. If anyone has any objections, please let me know.
>>>>
>>>> ------------------
>>>>
>>>> From: Bjorn Andersson <[email protected]>
>>>>
>>>> [ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ]
>>>>
>>>> The base of the TLMM gpiochip should not be statically defined as 0, fix
>>>> this to not artificially restrict the existence of multiple pinctrl-msm
>>>> devices.
>>>>
>>>> Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
>>>> Reported-by: Timur Tabi <[email protected]>
>>>> Signed-off-by: Bjorn Andersson <[email protected]>
>>>> Signed-off-by: Linus Walleij <[email protected]>
>>>> Signed-off-by: Sasha Levin <[email protected]>
>>>> Signed-off-by: Greg Kroah-Hartman <[email protected]>
>>>> ---
>>>> drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
>>>> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
>>>> @@ -818,7 +818,7 @@ static int msm_gpio_init(struct msm_pinc
>>>> return -EINVAL;
>>>> chip = &pctrl->chip;
>>>> - chip->base = 0;
>>>> + chip->base = -1;
>>>> chip->ngpio = ngpio;
>>>> chip->label = dev_name(pctrl->dev);
>>>> chip->parent = pctrl->dev;
>>> this patch creates a regression for me. on ipq8064 the systems gpios now
>>> start somewhere in the sky
>>>
>>> new layout
>>>
>>> lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip373 -> ../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip373
>>> lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip408 -> ../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip408
>>> lrwxrwxrwx 1 root root 0 Jan 1 00:00 gpiochip443 ->
>>> ../../devices/platform/soc/800000.pinmux/gpio/gpiochip443
>>>
>>>
>>> before the patch
>>>
>>> lrwxrwxrwx 1 root root 0 Jan 1 1970 gpiochip0 ->
>>> ../../devices/platform/soc/800000.pinmux/gpio/gpiochip0
>>> lrwxrwxrwx 1 root root 0 May 31 13:13 gpiochip442 -> ../../devices/platform/soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0/gpio/gpiochip442
>>> lrwxrwxrwx 1 root root 0 May 31 13:13 gpiochip477 -> ../../devices/platform/soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0/gpio/gpiochip477
>>>
>>>
>>> this broke my userspace gpio handling. i can override this, but still it
>>> doesnt look correct since there is a hole at the beginng likelly reserved by
>>> unused arm gpios
>> So does this mean that 4.17-rc is also broken for you? If so, this
>> needs to be reverted there as well.
>>
>> Bjorn, any ideas?
>>
> The Qualcomm TLMM (pinctrl) driver was introduced long after it was
> decided that the kernel should not rely on global/static gpio numbering.
>
> But due to a mistake on my part the dynamic gpio base for this gpiochip
> was always 0, which the offending patch corrects.
>
>
> So writing user space code relying on the gpio numbering for this chip
> has always been incorrect, just as it is for the other two gpiochips
> listed above.
>
>
> The original objection for backporting this patch was a touchscreen
> driver stopped working on 4.4, but the driver clearly doesn't depend on
> global or static numbering of gpios. I don't think this was ever root
> caused.
>
>
> I guess the pragmatic approach would be to come up with something like
> Timur's suggested fix that makes the first instance of this driver use
> base = 0 and then use dynamic numbering for the rest, to maintain
> support for this incorrect usage of the gpio sysfs interface. (Although
> that would probably break if Timur's customers move their user space to
> the new platform as "the first instance" isn't deterministic).
>
> Regards,
> Bjorn
that would at least guarantee backward compatiblity. i'm fine with that
Sebastian
>
On 5/31/18 11:57 AM, Bjorn Andersson wrote:
> (Although
> that would probably break if Timur's customers move their user space to
> the new platform as "the first instance" isn't deterministic).
Users of platforms that have multiple TLMMs should be required to use
gpiolib instead of sysfs. I've already updated all our internal code to
use it, and there is no external code that does GPIO on our server SoCs
anyway.
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
On Thu, May 31, 2018 at 1:21 PM, Sebastian Gottschall
<[email protected]> wrote:
> this patch creates a regression for me. on ipq8064 the systems gpios now
> start somewhere in the sky
(...)
> this broke my userspace gpio handling. i can override this, but still it
> doesnt look correct since there is a hole at the beginng likelly reserved by
> unused arm gpios
Out of curiosity: what is this userspace?
We do not break userspace, so I guess we should put in some hack
to keep the base 0 on ipq8064 then, but as pointed out by Bjorn
there will be problems when we get multiple gpiochips in later
platforms so it is just a stopgap solution.
Have you looked into using the new character device with your
userspace, either as shown in the examples:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/gpio
or using libgpiod:
https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/
Yours,
Linus Walleij