This is the start of the stable review cycle for the 5.15.17 release.
There are 846 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.17-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.15.17-rc1
Andrey Konovalov <[email protected]>
lib/test_meminit: destroy cache in kmem_cache_alloc_bulk() test
Moshe Tal <[email protected]>
bonding: Fix extraction of ports from the packet headers
Alistair Popple <[email protected]>
mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_fault
Miaoqian Lin <[email protected]>
lib82596: Fix IRQ check in sni_82596_probe
Matthias Schiffer <[email protected]>
scripts/dtc: dtx_diff: remove broken example from help text
Maxim Mikityanskiy <[email protected]>
sch_api: Don't skip qdisc attach on ingress
Sam Protsenko <[email protected]>
dt-bindings: watchdog: Require samsung,syscon-phandle for Exynos7
Alexander Stein <[email protected]>
dt-bindings: display: meson-vpu: Add missing amlogic,canvas property
Alexander Stein <[email protected]>
dt-bindings: display: meson-dw-hdmi: add missing sound-name-prefix property
Tom Rix <[email protected]>
net: mscc: ocelot: fix using match before it is set
Claudiu Beznea <[email protected]>
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
Ard Biesheuvel <[email protected]>
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
Russell King (Oracle) <[email protected]>
net: sfp: fix high power modules without diagnostic monitoring
Horatiu Vultur <[email protected]>
net: ocelot: Fix the call to switchdev_bridge_port_offload
Tom Rix <[email protected]>
net: ethernet: mtk_eth_soc: fix error checking in mtk_mac_config()
Slark Xiao <[email protected]>
net: wwan: Fix MRU mismatch issue which may lead to data connection lost
Sergey Shtylyov <[email protected]>
bcmgenet: add WOL IRQ check
Vladimir Oltean <[email protected]>
net: mscc: ocelot: don't let phylink re-enable TX PAUSE on the NPI port
Kevin Bracey <[email protected]>
net_sched: restore "mpu xxx" handling
Alex Elder <[email protected]>
net: ipa: fix atomic update in ipa_endpoint_replenish()
Jie Wang <[email protected]>
net: bonding: fix bond_xmit_broadcast return value error bug
Miroslav Lichvar <[email protected]>
net: fix sock_timestamping_bind_phc() to release device
David Heidelberg <[email protected]>
arm64: dts: qcom: msm8996: drop not documented adreno properties
Leon Romanovsky <[email protected]>
devlink: Remove misleading internal_flags from health reporter dump
Zechuan Chen <[email protected]>
perf probe: Fix ppc64 'perf probe add events failed' case
Uwe Kleine-König <[email protected]>
perf tools: Drop requirement for libstdc++.so for libopencsd check
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Fix lld view setting
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Fix concurrency over xfers_list
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Print debug message after realeasing the lock
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Don't start transactions at tx_submit level
Adrian Hunter <[email protected]>
perf script: Fix hex dump character output
Guillaume Nault <[email protected]>
libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()
Guillaume Nault <[email protected]>
gre: Don't accidentally set RTO_ONLINK in gre_fill_metadata_dst()
Eli Cohen <[email protected]>
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
Guillaume Nault <[email protected]>
xfrm: Don't accidentally set RTO_ONLINK in decode_session4()
Johannes Berg <[email protected]>
iwlwifi: fix Bz NMI behaviour
Eric Dumazet <[email protected]>
netns: add schedule point in ops_exit_list()
Eric Dumazet <[email protected]>
inet: frags: annotate races around fqdir->dead and fqdir->high_thresh
Eric W. Biederman <[email protected]>
taskstats: Cleanup the use of task->exit_code
Michael S. Tsirkin <[email protected]>
virtio_ring: mark ring unused on error
Eli Cohen <[email protected]>
vdpa/mlx5: Fix wrong configuration of virtio_version_1_0
Laurence de Bruxelles <[email protected]>
rtc: pxa: fix null pointer dereference
Dmitry Torokhov <[email protected]>
HID: vivaldi: fix handling devices not using numbered reports
Johannes Berg <[email protected]>
um: gitignore: Add kernel/capflags.c
Yury Norov <[email protected]>
bitops: protect find_first_{,zero}_bit properly
Robert Hancock <[email protected]>
net: axienet: increase default TX ring size to 128
Robert Hancock <[email protected]>
net: axienet: fix for TX busy handling
Robert Hancock <[email protected]>
net: axienet: fix number of TX ring slots for available check
Robert Hancock <[email protected]>
net: axienet: Fix TX ring slot available check
Robert Hancock <[email protected]>
net: axienet: limit minimum TX ring size
Robert Hancock <[email protected]>
net: axienet: add missing memory barriers
Robert Hancock <[email protected]>
net: axienet: reset core on initialization prior to MDIO access
Robert Hancock <[email protected]>
net: axienet: Wait for PhyRstCmplt after core reset
Robert Hancock <[email protected]>
net: axienet: increase reset timeout
Wen Gu <[email protected]>
net/smc: Fix hung_task when removing SMC-R devices
Miaoqian Lin <[email protected]>
gpio: idt3243x: Fix IRQ check in idt_gpio_probe
Miaoqian Lin <[email protected]>
gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe
John Keeping <[email protected]>
pinctrl/rockchip: fix gpio device creation
Robert Hancock <[email protected]>
clk: si5341: Fix clock HW provider cleanup
Stephen Boyd <[email protected]>
clk: Emit a stern warning with writable debugfs enabled
Eric Dumazet <[email protected]>
af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress
Dan Carpenter <[email protected]>
crypto: octeontx2 - uninitialized variable in kvf_limits_store()
Chao Yu <[email protected]>
f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
Chao Yu <[email protected]>
f2fs: fix to reserve space for IO align feature
Hyeong-Jun Kim <[email protected]>
f2fs: compress: fix potential deadlock of compress file
Chao Yu <[email protected]>
f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
Fengnan Chang <[email protected]>
f2fs: fix remove page failed in invalidate compress pages
Zack Rusin <[email protected]>
drm/vmwgfx: Remove unused compile options
Zack Rusin <[email protected]>
drm/vmwgfx: Remove explicit transparent hugepages support
Geert Uytterhoeven <[email protected]>
riscv: dts: microchip: mpfs: Drop empty chosen node
Miaoqian Lin <[email protected]>
parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
Tobias Waldekranz <[email protected]>
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
Tobias Waldekranz <[email protected]>
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
Guillaume Nault <[email protected]>
mlx5: Don't accidentally set RTO_ONLINK before mlx5e_route_lookup_ipv4_get()
Eric Dumazet <[email protected]>
ipv4: avoid quadratic behavior in netns dismantle
Eric Dumazet <[email protected]>
ipv4: update fib_info_cnt under spinlock protection
German Gomez <[email protected]>
perf evsel: Override attr->sample_period for non-libpfm4 events
Daniel Borkmann <[email protected]>
bpf: Mark PTR_TO_FUNC register initially with zero offset
Yafang Shao <[email protected]>
bpf: Fix mount source show for bpffs
Toke Høiland-Jørgensen <[email protected]>
xdp: check prog type before updating BPF link
Quentin Monnet <[email protected]>
bpftool: Fix indent in option lists in the documentation
Quentin Monnet <[email protected]>
bpftool: Remove inclusion of utilities.mak from Makefiles
Russell King <[email protected]>
arm64/bpf: Remove 128MB limit for BPF JIT programs
Maxime Ripard <[email protected]>
drm/vc4: crtc: Copy assigned channel to the CRTC
Maxime Ripard <[email protected]>
drm/vc4: Fix non-blocking commit getting stuck forever
Maxime Ripard <[email protected]>
drm/vc4: crtc: Drop feed_txp from state
Ye Bin <[email protected]>
block: Fix fsync always failed if once failed
Jens Axboe <[email protected]>
block: fix async_depth sysfs interface for mq-deadline
Tobias Waldekranz <[email protected]>
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
Anders Roxell <[email protected]>
powerpc/cell: Fix clang -Wimplicit-fallthrough warning
Moshe Shemesh <[email protected]>
Revert "net/mlx5: Add retry mechanism to the command entry index allocation"
Amelie Delaunay <[email protected]>
dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASK
Chengguang Xu <[email protected]>
RDMA/rxe: Fix a typo in opcode name
Yixing Liu <[email protected]>
RDMA/hns: Modify the mapping attribute of doorbell to device
Dave Jiang <[email protected]>
dmaengine: idxd: fix wq settings post wq disable
Kunihiko Hayashi <[email protected]>
dmaengine: uniphier-xdmac: Fix type of address variables
Håkon Bugge <[email protected]>
RDMA/cma: Remove open coding of overflow checking for private_data_len
Miaoqian Lin <[email protected]>
scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
Bart Van Assche <[email protected]>
scsi: core: Show SCMD_LAST in text form
Luiz Augusto von Dentz <[email protected]>
Bluetooth: hci_sync: Fix not setting adv set duration
Markus Reichl <[email protected]>
net: usb: Correct reset handling of smsc95xx
Mark Chen <[email protected]>
Bluetooth: btusb: Return error code when getting patch status failed
Randy Dunlap <[email protected]>
Documentation: fix firewire.rst ABI file path error
Lukas Bulwahn <[email protected]>
Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
Alexandre Ghiti <[email protected]>
Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH
Alexandre Ghiti <[email protected]>
Documentation, arch: Remove leftovers from raw device
Sakari Ailus <[email protected]>
Documentation: ACPI: Fix data node reference documentation
Daniel Thompson <[email protected]>
Documentation: dmaengine: Correctly describe dmatest with channel unset
Mike Leach <[email protected]>
Documentation: coresight: Fix documentation issue
Randy Dunlap <[email protected]>
media: correct MEDIA_TEST_SUPPORT help text
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Make sure the device is powered with CEC
Suresh Udipi <[email protected]>
media: rcar-csi2: Optimize the selection PHTW register
Marc Kleine-Budde <[email protected]>
can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message
Ben Hutchings <[email protected]>
firmware: Update Kconfig help text for Google firmware
Baruch Siach <[email protected]>
of: base: Improve argument length mismatch error
Christian König <[email protected]>
drm/radeon: fix error handling in radeon_driver_open_kms
Rajneesh Bhardwaj <[email protected]>
Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process"
Aaron Ma <[email protected]>
ath11k: qmi: avoid error messages when dma allocation fails
Nikita Yushchenko <[email protected]>
tracing/osnoise: Properly unhook events if start_per_cpu_kthreads() fails
Theodore Ts'o <[email protected]>
ext4: don't use the orphan list when migrating an inode
Zhang Yi <[email protected]>
ext4: fix an use-after-free issue about data=journal writeback mode
Ye Bin <[email protected]>
ext4: fix null-ptr-deref in '__ext4_journal_ensure_credits'
Sebastian Andrzej Siewior <[email protected]>
ext4: destroy ext4_fc_dentry_cachep kmemcache on module removal
Xin Yin <[email protected]>
ext4: fast commit may miss tracking unwritten range during ftruncate
Xin Yin <[email protected]>
ext4: use ext4_ext_remove_space() for fast commit replay delete range
Ye Bin <[email protected]>
ext4: Fix BUG_ON in ext4_bread when write quota data
Luís Henriques <[email protected]>
ext4: set csum seed in tmp inode while migrating to extents
Xin Yin <[email protected]>
ext4: fix fast commit may miss tracking range for FALLOC_FL_ZERO_RANGE
Harshad Shirwadkar <[email protected]>
ext4: initialize err_blk before calling __ext4_get_inode_loc
Chunguang Xu <[email protected]>
ext4: fix a possible ABBA deadlock due to busy PA
Jan Kara <[email protected]>
ext4: make sure quota gets properly shutdown on error
Jan Kara <[email protected]>
ext4: make sure to reset inode lockdep class when quota enabling fails
Filipe Manana <[email protected]>
btrfs: respect the max size in the header when activating swap file
Josef Bacik <[email protected]>
btrfs: check the root node for uptodate before returning it
Filipe Manana <[email protected]>
btrfs: fix deadlock between quota enable and other quota operations
Nicolas Dichtel <[email protected]>
xfrm: fix dflt policy check when there is no policy configured
Ghalem Boudour <[email protected]>
xfrm: fix policy lookup for ipv6 gre packets
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Set PCI_STATUS_CAP_LIST for PCIe device
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Correctly set PCIe capabilities
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Fix definitions of reserved bits
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Properly mark reserved PCIe bits in PCI config space
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Make expansion ROM Base Address register read-only
Lukas Wunner <[email protected]>
PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
Hans de Goede <[email protected]>
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
Rob Herring <[email protected]>
PCI: xgene: Fix IB window setup
José Roberto de Souza <[email protected]>
drm/i915/display/ehl: Update voltage swing table
Alex Deucher <[email protected]>
drm/amdgpu: don't do resets on APUs which don't support it
James Smart <[email protected]>
scsi: lpfc: Fix lpfc_force_rscn ndlp kref imbalance
Nicholas Piggin <[email protected]>
powerpc/64s/radix: Fix huge vmap false positive
John David Anglin <[email protected]>
parisc: Fix lpa and lpa_user defines
Brian Norris <[email protected]>
drm/bridge: analogix_dp: Make PSR-exit block less
Ilia Mirkin <[email protected]>
drm/nouveau/kms/nv04: use vzalloc for nv04_display
Yizhuo Zhai <[email protected]>
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
Lucas Stach <[email protected]>
drm/etnaviv: limit submit sizes
Dmitry Osipenko <[email protected]>
drm/tegra: submit: Add missing pm_runtime_mark_last_busy()
Sakari Ailus <[email protected]>
device property: Fix fwnode_graph_devcon_match() fwnode leak
Alexander Gordeev <[email protected]>
s390/mm: fix 2KB pgtable release race
Ilan Peer <[email protected]>
iwlwifi: mvm: Increase the scan timeout guard to 30 seconds
Christophe JAILLET <[email protected]>
remoteproc: imx_rproc: Fix a resource leak in the remove function
Steven Rostedt <[email protected]>
tracing: Have syscall trace events use trace_event_buffer_lock_reserve()
Xiangyang Zhang <[email protected]>
tracing/kprobes: 'nmissed' not showed correctly for kretprobe
Andrey Ryabinin <[email protected]>
sched/cpuacct: Fix user/system in shown cpuacct.usage*
Andrey Ryabinin <[email protected]>
cputime, cpuacct: Include guest time in user time in cpuacct.stat
Lukas Wunner <[email protected]>
serial: Fix incorrect rs485 polarity on uart open
Xie Yongji <[email protected]>
fuse: Pass correct lend value to filemap_write_and_wait_range()
Christophe JAILLET <[email protected]>
HID: magicmouse: Fix an error handling path in magicmouse_probe()
Xiao Ni <[email protected]>
md: Move alloc/free acct bioset in to personality
Oleksandr Andrushchenko <[email protected]>
xen/gntdev: fix unmap notification order
Kunihiko Hayashi <[email protected]>
spi: uniphier: Fix a bug that doesn't point to private data correctly
Dmitry Osipenko <[email protected]>
mfd: tps65910: Set PWR_OFF bit during driver probe
Patrick Williams <[email protected]>
tpm: fix NPE on probe for missing device
Lino Sanfilippo <[email protected]>
tpm: fix potential NULL pointer access in tpm_del_char_device
Petr Cvachoucek <[email protected]>
ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers
Meng Li <[email protected]>
crypto: caam - replace this_cpu_ptr with raw_cpu_ptr
Marek Vasut <[email protected]>
crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
Heiner Kallweit <[email protected]>
crypto: omap-aes - Fix broken pm_runtime_and_get() usage
Zhu Lingshan <[email protected]>
ifcvf/vDPA: fix misuse virtio-net device config size for blk dev
Arnaud Pouliquen <[email protected]>
rpmsg: core: Clean up resources on announce_create failure.
Andrew Lunn <[email protected]>
udp6: Use Segment Routing Header for dest address if present
Andrew Lunn <[email protected]>
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
Andrew Lunn <[email protected]>
seg6: export get_srh() for ICMP handling
Conor Dooley <[email protected]>
mailbox: change mailbox-mpfs compatible string
Miaoqian Lin <[email protected]>
phy: mediatek: Fix missing check in mtk_mipi_tx_probe
Ohad Sharabi <[email protected]>
habanalabs: skip read fw errors if dynamic descriptor invalid
Tzung-Bi Shih <[email protected]>
ASoC: mediatek: mt8183: fix device_node leak
Tzung-Bi Shih <[email protected]>
ASoC: mediatek: mt8173: fix device_node leak
Chunfeng Yun <[email protected]>
phy: phy-mtk-tphy: add support efuse setting
Tzung-Bi Shih <[email protected]>
ASoC: mediatek: mt8192-mt6359: fix device_node leak
Sreekanth Reddy <[email protected]>
scsi: mpi3mr: Fixes around reply request queues
Christoph Hellwig <[email protected]>
scsi: sr: Don't use GFP_DMA
Tianjia Zhang <[email protected]>
MIPS: Octeon: Fix build errors using clang
Michael Ellerman <[email protected]>
selftests/powerpc: Add a test of sigreturning to the kernel
Lakshmi Sowjanya D <[email protected]>
i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
Marc Zyngier <[email protected]>
irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time
Ye Guojin <[email protected]>
MIPS: OCTEON: add put_device() after of_find_device_by_node()
Jan Kara <[email protected]>
udf: Fix error handling in udf_new_inode()
Hari Bathini <[email protected]>
powerpc/fadump: Fix inaccurate CPU state info in vmcore generated with panic
Hari Bathini <[email protected]>
powerpc: handle kdump appropriately with crash_kexec_post_notifiers option
Thadeu Lima de Souza Cascardo <[email protected]>
selftests/powerpc/spectre_v2: Return skip code when miss_percent is high
Christophe Leroy <[email protected]>
powerpc/40x: Map 32Mbytes of memory at startup
Nathan Chancellor <[email protected]>
MIPS: Loongson64: Use three arguments for slti
Takashi Iwai <[email protected]>
ALSA: seq: Set upper limit of processed events
James Smart <[email protected]>
scsi: lpfc: Trigger SLI4 firmware dump before doing driver cleanup
James Smart <[email protected]>
scsi: lpfc: Fix leaked lpfc_dmabuf mbox allocations with NPIV
Bart Van Assche <[email protected]>
scsi: ufs: Fix a kernel crash during shutdown
Stephan Gerhold <[email protected]>
interconnect: qcom: rpm: Prevent integer overflow in rate
Christoph Hellwig <[email protected]>
dm: fix alloc_dax error handling in alloc_dev
Srinivas Kandagatla <[email protected]>
nvmem: core: set size for sysfs bin file
Christophe Leroy <[email protected]>
w1: Misuse of get_user()/put_user() reported by sparse
Alexey Kardashevskiy <[email protected]>
KVM: PPC: Book3S: Suppress failed alloc warning in H_COPY_TOFROM_GUEST
Alexey Kardashevskiy <[email protected]>
KVM: PPC: Book3S: Suppress warnings when allocating too big memory slots
Christophe Leroy <[email protected]>
powerpc/powermac: Add missing lockdep_register_key()
Martin Blumenstingl <[email protected]>
clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB
Joakim Tjernlund <[email protected]>
i2c: mpc: Correct I2C reset procedure
Michael Ellerman <[email protected]>
powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING
Heiner Kallweit <[email protected]>
i2c: i801: Don't silently correct invalid transfer size
Ye Guojin <[email protected]>
ASoC: imx-hdmi: add put_device() after of_find_device_by_node()
Nicholas Piggin <[email protected]>
powerpc/watchdog: Fix missed watchdog reset due to memory ordering race
Julia Lawall <[email protected]>
powerpc/btext: add missing of_node_put
Julia Lawall <[email protected]>
powerpc/cell: add missing of_node_put
Julia Lawall <[email protected]>
powerpc/powernv: add missing of_node_put
Julia Lawall <[email protected]>
powerpc/6xx: add missing of_node_put
Ingo Molnar <[email protected]>
x86/kbuild: Enable CONFIG_KALLSYMS_ALL=y in the defconfigs
Marc Kleine-Budde <[email protected]>
can: flexcan: add more quirks to describe RX path capabilities
Marc Kleine-Budde <[email protected]>
can: flexcan: rename RX modes
Dario Binacchi <[email protected]>
can: flexcan: allow to change quirks at runtime
Mauro Carvalho Chehab <[email protected]>
scripts: sphinx-pre-install: Fix ctex support on Debian
John David Anglin <[email protected]>
parisc: Avoid calling faulthandler_disabled() twice
Maor Dickman <[email protected]>
net/mlx5e: Unblock setting vid 0 for VF in case PF isn't eswitch manager
Maher Sanalla <[email protected]>
net/mlx5: Update log_max_qp value to FW max capability
Jason A. Donenfeld <[email protected]>
random: do not throw away excess input to crng_fast_load
Lukas Wunner <[email protected]>
serial: core: Keep mctrl register state and cached copy in sync
Lukas Wunner <[email protected]>
serial: pl011: Drop CR register reset on set_termios
Lukas Wunner <[email protected]>
serial: pl010: Drop CR register reset on set_termios
Konrad Dybcio <[email protected]>
regulator: qcom_smd: Align probe function with rpmh-regulator
Russell King (Oracle) <[email protected]>
net: gemini: allow any RGMII interface mode
Russell King (Oracle) <[email protected]>
net: phy: marvell: configure RGMII delays for 88E1118
Danielle Ratson <[email protected]>
mlxsw: pci: Avoid flow control for EMAD packets
Jiri Olsa <[email protected]>
bpf/selftests: Fix namespace mount setup in tc_redirect
Joe Thornber <[email protected]>
dm space map common: add bounds check to sm_ll_lookup_bitmap()
Joe Thornber <[email protected]>
dm btree: add a defensive bounds check to insert_at()
Ping-Ke Shih <[email protected]>
mac80211: allow non-standard VHT MCS-10/11
Florian Fainelli <[email protected]>
net: mdio: Demote probed message to debug print
Josef Bacik <[email protected]>
btrfs: remove BUG_ON(!eie) in find_parent_nodes
Josef Bacik <[email protected]>
btrfs: remove BUG_ON() in find_parent_nodes()
Mario Limonciello <[email protected]>
ACPI: CPPC: Check present CPUs for determining _CPC is valid
Thomas Weißschuh <[email protected]>
ACPI: battery: Add the ThinkPad "Not Charging" quirk
Marina Nikolic <[email protected]>
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
Zongmin Zhou <[email protected]>
drm/amdgpu: fixup bad vram size on gmc v8
Rajneesh Bhardwaj <[email protected]>
drm/amdgpu: Don't inherit GEM object VMAs in child process
AngeloGioacchino Del Regno <[email protected]>
mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling
Kirill A. Shutemov <[email protected]>
ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
Sudeep Holla <[email protected]>
ACPICA: Fix wrong interpretation of PCC address
Rafael J. Wysocki <[email protected]>
ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
Rafael J. Wysocki <[email protected]>
ACPICA: Utilities: Avoid deleting the same object twice in a row
Mark Langsdorf <[email protected]>
ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions
Kyeong Yoo <[email protected]>
jffs2: GC deadlock reading a page that is used in jffs2_write_begin()
Lucas Stach <[email protected]>
drm/etnaviv: consider completed fence seqno in hang check
Antony Antony <[email protected]>
xfrm: rate limit SA mapping change message to user space
Luiz Augusto von Dentz <[email protected]>
Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES
Tedd Ho-Jeong An <[email protected]>
Bluetooth: btintel: Add missing quirks and msft ext for legacy bootloader
Ben Greear <[email protected]>
ath11k: Fix napi related hang
Randy Dunlap <[email protected]>
um: registers: Rename function names to avoid conflicts and build problems
Tetsuo Handa <[email protected]>
block: check minor range in device_add_disk()
Hector Martin <[email protected]>
mmc: sdhci-pci-gli: GL9755: Support for CD/WP inversion on OF platforms
Luca Coelho <[email protected]>
iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ
Avraham Stern <[email protected]>
iwlwifi: mvm: fix AUX ROC removal
Ilan Peer <[email protected]>
iwlwifi: mvm: Fix calculation of frame length
Johannes Berg <[email protected]>
iwlwifi: remove module loading failure message
Johannes Berg <[email protected]>
iwlwifi: fix leaks/bad data after failed firmware load
Changcheng Deng <[email protected]>
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
Po-Hao Huang <[email protected]>
rtw88: 8822c: update rx settings to prevent potential hw deadlock
Zekun Shen <[email protected]>
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
Tetsuo Handa <[email protected]>
ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()
Tetsuo Handa <[email protected]>
ath9k_htc: fix NULL pointer dereference at ath9k_htc_rxep()
Felix Fietkau <[email protected]>
mt76: mt7615: improve wmm index allocation
Xing Song <[email protected]>
mt76: do not pass the received frame with decryption error
Peter Chiu <[email protected]>
mt76: mt7615: fix possible deadlock while mt7615_register_ext_phy()
Kai-Heng Feng <[email protected]>
usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
Rafael J. Wysocki <[email protected]>
cpufreq: Fix initialization of min and max frequency QoS requests
Rafael J. Wysocki <[email protected]>
PM: runtime: Add safety net to supplier device release
Weili Qian <[email protected]>
crypto: hisilicon/hpre - fix memory leak in hpre_curve25519_src_init()
Peter Gonda <[email protected]>
crypto: ccp - Move SEV_INIT retry for corrupted data
Thierry Reding <[email protected]>
arm64: tegra: Adjust length of CCPLEX cluster MMIO region
Biwen Li <[email protected]>
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
Paul Moore <[email protected]>
audit: ensure userspace is penalized the same as the kernel when under pressure
Jingwen Chen <[email protected]>
drm/amd/amdgpu: fix gmc bo pin count leak in SRIOV
Jingwen Chen <[email protected]>
drm/amd/amdgpu: fix psp tmr bo pin count leak in SRIOV
Ulf Hansson <[email protected]>
mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO
Biju Das <[email protected]>
mmc: tmio: reinit card irqs in reset routine
Zhou Qingyang <[email protected]>
media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()
Mikhail Rudenko <[email protected]>
media: rockchip: rkisp1: use device name for debugfs subdir name
Sean Young <[email protected]>
media: igorplugusb: receiver overflow should be reported
Alistair Francis <[email protected]>
HID: i2c-hid-of: Expose the touchscreen-inverted properties
Alistair Francis <[email protected]>
HID: quirks: Allow inverting the absolute X/Y values
Felix Kuehling <[email protected]>
drm/amdkfd: Fix error handling in svm_range_add
Paolo Abeni <[email protected]>
bpf: Do not WARN in bpf_warn_invalid_xdp_action()
David Gow <[email protected]>
kunit: Don't crash if no parameters are generated
Suresh Kumar <[email protected]>
net: bonding: debug: avoid printing debug logs when bond is not notifying peers
Borislav Petkov <[email protected]>
x86/mce: Mark mce_read_aux() noinstr
Borislav Petkov <[email protected]>
x86/mce: Mark mce_end() noinstr
Borislav Petkov <[email protected]>
x86/mce: Mark mce_panic() noinstr
Borislav Petkov <[email protected]>
x86/mce: Allow instrumentation during task work queueing
Alex Elder <[email protected]>
ARM: dts: qcom: sdx55: fix IPA interconnect definitions
Baochen Qiang <[email protected]>
ath11k: Avoid false DEADLOCK warning reported by lockdep
Heiko Carstens <[email protected]>
selftests/ftrace: make kprobe profile testcase description unique
Iwona Winiarska <[email protected]>
gpio: aspeed-sgpio: Convert aspeed_sgpio.lock to raw_spinlock
Iwona Winiarska <[email protected]>
gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlock
Russell King (Oracle) <[email protected]>
net: phy: prefer 1000baseT over 1000baseKX
Antoine Tenart <[email protected]>
net-sysfs: update the queue counts in the unregistration path
Sebastian Gottschall <[email protected]>
ath10k: Fix tx hanging
Wen Gong <[email protected]>
ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_work
Wander Lairson Costa <[email protected]>
rcutorture: Avoid soft lockup during cpu stall
Shaul Triebitz <[email protected]>
iwlwifi: mvm: avoid clearing a just saved session protection id
Johannes Berg <[email protected]>
iwlwifi: mvm: synchronize with FW after multicast commands
Kieran Bingham <[email protected]>
arm64: dts: renesas: Fix thermal bindings
Mika Westerberg <[email protected]>
thunderbolt: Runtime PM activate both ends of the device link
Mauro Carvalho Chehab <[email protected]>
media: m920x: don't use stack on USB reads
Tsuchiya Yuto <[email protected]>
media: atomisp: fix "variable dereferenced before check 'asd'"
Zhou Qingyang <[email protected]>
media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()
Niklas Söderlund <[email protected]>
media: rcar-vin: Update format alignment constraints
James Hilliard <[email protected]>
media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.
Laurent Pinchart <[email protected]>
drm: rcar-du: Fix CRTC timings when CMM is used
Joerg Roedel <[email protected]>
x86/mm: Flush global TLB when switching to trampoline page-table
Xiongwei Song <[email protected]>
floppy: Add max size check for user space request
Neal Liu <[email protected]>
usb: uhci: add aspeed ast2600 uhci support
Kishon Vijay Abraham I <[email protected]>
arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
Kishon Vijay Abraham I <[email protected]>
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
Hans de Goede <[email protected]>
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
Hans de Goede <[email protected]>
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
Hans de Goede <[email protected]>
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
Hans de Goede <[email protected]>
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
Zack Rusin <[email protected]>
drm/vmwgfx: Introduce a new placement for MOB page tables
Zack Rusin <[email protected]>
drm/vmwgfx: Release ttm memory if probe fails
Adam Ward <[email protected]>
regulator: da9121: Prevent current limit change when enabled
Mansur Alisha Shaik <[email protected]>
media: venus: avoid calling core_clk_setrate() concurrently during concurrent video sessions
Sriram R <[email protected]>
ath11k: Avoid NULL ptr access during mgmt tx cleanup
Zekun Shen <[email protected]>
rsi: Fix out-of-bounds read in rsi_read_pkt()
Zekun Shen <[email protected]>
rsi: Fix use-after-free in rsi_rx_done_handler()
Zekun Shen <[email protected]>
mwifiex: Fix skb_over_panic in mwifiex_usb_recv()
Stephan Müller <[email protected]>
crypto: jitter - consider 32 LSB for APT
Chengfeng Ye <[email protected]>
HSI: core: Fix return freed object in hsi_new_client
Hans de Goede <[email protected]>
gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use
Fugang Duan <[email protected]>
tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
Jiri Slaby <[email protected]>
mxser: keep only !tty test in ISR
Martyn Welch <[email protected]>
drm/bridge: megachips: Ensure both bridges are probed before registration
Martin Leung <[email protected]>
drm/amd/display: add else to avoid double destroy clk_mgr
Danielle Ratson <[email protected]>
mlxsw: pci: Add shutdown method in PCI driver
Jan Kiszka <[email protected]>
soc: ti: pruss: fix referenced node in error message
Alex Deucher <[email protected]>
drm/amdgpu/display: set vblank_disable_immediate for DC
Yang Li <[email protected]>
drm/amd/display: check top_pipe_to_program pointer
Lukas Bulwahn <[email protected]>
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
Marek Vasut <[email protected]>
soc: imx: gpcv2: Synchronously suspend MIX domains
Konrad Dybcio <[email protected]>
arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name
Dinh Nguyen <[email protected]>
EDAC/synopsys: Use the quirk for version instead of ddr version
Yang Li <[email protected]>
ethernet: renesas: Use div64_ul instead of do_div
Andrii Nakryiko <[email protected]>
libbpf: Accommodate DWARF/compiler bug with duplicated structs
Zheyu Ma <[email protected]>
media: b2c2: Add missing check in flexcop_pci_isr:
José Expósito <[email protected]>
HID: apple: Do not reset quirks when the Fn key is not found
José Expósito <[email protected]>
HID: magicmouse: Report battery level over USB
Hans de Goede <[email protected]>
drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Book X91F/L
Brian Chen <[email protected]>
psi: Fix PSI_MEM_FULL state when tasks are in memstall and doing reclaim
Pavankumar Kondeti <[email protected]>
usb: gadget: f_fs: Use stream_open() for endpoint files
Haimin Zhang <[email protected]>
USB: ehci_brcm_hub_control: Improve port index sanitizing
Amjad Ouled-Ameur <[email protected]>
usb: dwc3: meson-g12a: fix shared reset control use
Baochen Qiang <[email protected]>
ath11k: Fix crash caused by uninitialized TX ring
Mauro Carvalho Chehab <[email protected]>
media: atomisp: handle errors at sh_css_create_isp_params()
Linus Lüssing <[email protected]>
batman-adv: allow netlink usage in unprivileged containers
Wan Jiabing <[email protected]>
ARM: shmobile: rcar-gen2: Add missing of_node_put()
Mauro Carvalho Chehab <[email protected]>
media: atomisp: check before deference asd variable
Hans de Goede <[email protected]>
media: atomisp-ov2680: Fix ov2680_set_fmt() clobbering the exposure
Mauro Carvalho Chehab <[email protected]>
media: atomisp: set per-device's default mode
Mauro Carvalho Chehab <[email protected]>
media: atomisp: fix try_fmt logic
Ben Skeggs <[email protected]>
drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR
Neil Armstrong <[email protected]>
drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTOR
Zekun Shen <[email protected]>
ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply
Andrii Nakryiko <[email protected]>
selftests/bpf: Fix bpf_object leak in skb_ctx selftest
Andrii Nakryiko <[email protected]>
selftests/bpf: Destroy XDP link correctly
Andrii Nakryiko <[email protected]>
selftests/bpf: Fix memory leaks in btf_type_c_dump() helper
Qiang Yu <[email protected]>
drm/lima: fix warning when CONFIG_DEBUG_SG=y & CONFIG_DMA_API_DEBUG=y
Andrii Nakryiko <[email protected]>
libbpf: Validate that .BTF and .BTF.ext sections contain data
Alexander Aring <[email protected]>
fs: dlm: filter user dlm messages for kernel locks
Archie Pusaka <[email protected]>
Bluetooth: Fix removing adv when processing cmd complete
Brian Norris <[email protected]>
drm/panel: Delete panel on mipi_dsi_attach() failure
Wei Yongjun <[email protected]>
Bluetooth: Fix memory leak of hci device
Wei Yongjun <[email protected]>
Bluetooth: Fix debugfs entry leak in hci_register_dev()
Merlijn Wajer <[email protected]>
leds: lp55xx: initialise output direction from dts
Sicelo A. Mhlongo <[email protected]>
ARM: dts: omap3-n900: Fix lp5523 for multi color
jason-jh.lin <[email protected]>
mailbox: fix gce_num of mt8192 driver data
Paul Cercueil <[email protected]>
MIPS: compressed: Fix build with ZSTD compression
Paul Cercueil <[email protected]>
MIPS: boot/compressed/: add __ashldi3 to target for ZSTD compression
Stephen Boyd <[email protected]>
of/fdt: Don't worry about non-memory region overlap for no-map
Baruch Siach <[email protected]>
of: base: Fix phandle argument length mismatch error message
Conor Dooley <[email protected]>
clk: bm1880: remove kfrees on static allocations
Shengjiu Wang <[email protected]>
ASoC: fsl_asrc: refine the check of available clock divider
Shengjiu Wang <[email protected]>
ASoC: imx-card: improve the sound quality for low rate
Shengjiu Wang <[email protected]>
ASoC: imx-card: Fix mclk calculation issue for akcodec
Shengjiu Wang <[email protected]>
ASoC: imx-card: Need special setting for ak4497 on i.MX8MQ
Taniya Das <[email protected]>
clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabled
Kamal Heib <[email protected]>
RDMA/cxgb4: Set queue pair state when being queried
Christian A. Ehrhardt <[email protected]>
ALSA: hda/cs8409: Fix Jack detection after resume
Christian A. Ehrhardt <[email protected]>
ALSA: hda/cs8409: Increase delay during jack detection
Alyssa Ross <[email protected]>
ASoC: fsl_mqs: fix MODULE_ALIAS
Ammar Faizi <[email protected]>
powerpc/xive: Add missing null check after calling kmalloc
Randy Dunlap <[email protected]>
mips: bcm63xx: add support for clk_set_parent()
Randy Dunlap <[email protected]>
mips: lantiq: add support for clk_set_parent()
Sameer Pujar <[email protected]>
arm64: tegra: Remove non existent Tegra194 reset
Trevor Wu <[email protected]>
ASoC: mediatek: mt8195: correct pcmif BE dai control flow
Wei Yongjun <[email protected]>
misc: lattice-ecp3-config: Fix task hung when firmware load failed
Jiasheng Jiang <[email protected]>
ASoC: samsung: idma: Check of ioremap return value
Swapnil Jakhade <[email protected]>
phy: cadence: Sierra: Fix to get correct parent for mux clocks
Michael Ellerman <[email protected]>
powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
Michael Ellerman <[email protected]>
powerpc/64s: Mask NIP before checking against SRR0
Jiasheng Jiang <[email protected]>
ASoC: mediatek: Check for error clk pointer
Ryuta NAKANISHI <[email protected]>
phy: uniphier-usb3ss: fix unintended writing zeros to PHY register
Alan Stern <[email protected]>
scsi: block: pm: Always set request queue runtime active in blk_post_runtime_resume()
Pingfan Liu <[email protected]>
efi: apply memblock cap after memblock_add()
Zhen Lei <[email protected]>
of: fdt: Aggregate the processing of "linux,usable-memory-range"
Trevor Wu <[email protected]>
ASoC: mediatek: mt8195: correct default value
Xiongfeng Wang <[email protected]>
iommu/iova: Fix race between FQ timeout and teardown
Cezary Rojewski <[email protected]>
ASoC: Intel: catpt: Test dmaengine_submit() result before moving on
Maxim Levitsky <[email protected]>
iommu/amd: Remove useless irq affinity notifier
Maxim Levitsky <[email protected]>
iommu/amd: X2apic mode: mask/unmask interrupts on suspend/resume
Maxim Levitsky <[email protected]>
iommu/amd: X2apic mode: setup the INTX registers on mask/unmask
Maxim Levitsky <[email protected]>
iommu/amd: X2apic mode: re-enable after resume
Maxim Levitsky <[email protected]>
iommu/amd: Restore GA log/tail pointer on host resume
Arnd Bergmann <[email protected]>
dmaengine: pxa/mmp: stop referencing config->slave_id
Lukas Bulwahn <[email protected]>
mips: fix Kconfig reference to PHYS_ADDR_T_64BIT
Lukas Bulwahn <[email protected]>
mips: add SYS_HAS_CPU_MIPS64_R5 config for MIPS Release 5 support
Dillon Min <[email protected]>
clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell
Frank Rowand <[email protected]>
of: unittest: 64 bit dma address test requires arch support
Jim Quinlan <[email protected]>
of: unittest: fix warning on PowerPC frame size warning
Jiasheng Jiang <[email protected]>
ASoC: rt5663: Handle device_property_read_u32_array error codes
Avihai Horon <[email protected]>
RDMA/cma: Let cma_resolve_ib_dev() continue search even after empty entry
Avihai Horon <[email protected]>
RDMA/core: Let ib_find_gid() continue search even after empty entry
Rob Clark <[email protected]>
iommu/arm-smmu-qcom: Fix TTBR0 read
Christophe Leroy <[email protected]>
powerpc/powermac: Add additional missing lockdep_register_key()
Thomas Gleixner <[email protected]>
PCI/MSI: Fix pci_irq_vector()/pci_irq_get_affinity()
Kamal Heib <[email protected]>
RDMA/qedr: Fix reporting max_{send/recv}_wr attrs
Bart Van Assche <[email protected]>
scsi: ufs: Fix race conditions related to driver data
Bart Van Assche <[email protected]>
scsi: core: Fix scsi_device_max_queue_depth()
Hector Martin <[email protected]>
iommu/io-pgtable-arm: Fix table descriptor paddr formatting
Lu Baolu <[email protected]>
iommu: Extend mutex lock scope in iommu_probe_device()
Jiasheng Jiang <[email protected]>
uio: uio_dmem_genirq: Catch the Exception
Stafford Horne <[email protected]>
openrisc: Add clone3 ABI wrapper
Todd Kjos <[email protected]>
binder: avoid potential data leakage when copying txn
Todd Kjos <[email protected]>
binder: fix handling of error during copy
Kees Cook <[email protected]>
char/mwave: Adjust io port register size
Andy Shevchenko <[email protected]>
misc: at25: Make driver OF independent again
Takashi Iwai <[email protected]>
ALSA: usb-audio: Drop superfluous '0' in Presonus Studio 1810c's ID
Bixuan Cui <[email protected]>
ALSA: oss: fix compile error when OSS_DEBUG is enabled
Waiman Long <[email protected]>
clocksource: Avoid accidental unstable marking of clocksources
Christophe Leroy <[email protected]>
powerpc/32s: Fix shift-out-of-bounds in KASAN init
Christophe Leroy <[email protected]>
powerpc/modules: Don't WARN on first module allocation attempt
Athira Rajeev <[email protected]>
powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC
Niklas Söderlund <[email protected]>
dt-bindings: thermal: Fix definition of cooling-maps contribution property
Thomas Gleixner <[email protected]>
ALSA: hda: Make proper use of timecounter
Jack Wang <[email protected]>
RDMA/rtrs-clt: Fix the initial value of min_latency
Lukas Bulwahn <[email protected]>
ASoC: codecs: wcd938x: add SND_SOC_WCD938_SDW to codec list instead
Lukas Bulwahn <[email protected]>
ASoC: uniphier: drop selecting non-existing SND_SOC_UNIPHIER_AIO_DMA
Peiwei Hu <[email protected]>
powerpc/prom_init: Fix improper check of prom_getprop()
Adam Ford <[email protected]>
clk: imx8mn: Fix imx8mn_clko1_sels
Lad Prabhakar <[email protected]>
clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple()
Lad Prabhakar <[email protected]>
clk: renesas: rzg2l: Check return value of pm_genpd_init()
Igor Pylypiv <[email protected]>
scsi: pm80xx: Update WARN_ON check in pm8001_mpi_build_cmd()
Kamal Heib <[email protected]>
RDMA/hns: Validate the pkey index
Christophe JAILLET <[email protected]>
RDMA/bnxt_re: Scan the whole bitmap when checking if "disabling RCFW with pending cmd-bit"
Takashi Iwai <[email protected]>
ALSA: hda: Fix potential deadlock at codec unbinding
Takashi Iwai <[email protected]>
ALSA: hda: Add missing rwsem around snd_ctl_remove() calls
Takashi Iwai <[email protected]>
ALSA: PCM: Add missing rwsem around snd_ctl_remove() calls
Takashi Iwai <[email protected]>
ALSA: jack: Add missing rwsem around snd_ctl_remove() calls
Pierre-Louis Bossart <[email protected]>
ASoC: Intel: sof_sdw: fix jack detection on HP Spectre x360 convertible
Jan Kara <[email protected]>
ext4: avoid trim error on fs with small groups
Pavel Skripkin <[email protected]>
net: mcs7830: handle usb read errors properly
Edwin Peer <[email protected]>
bnxt_en: use firmware provided max timeout for messages
Edwin Peer <[email protected]>
bnxt_en: move coredump functions into dedicated file
Edwin Peer <[email protected]>
bnxt_en: Refactor coredump functions
Nathan Chancellor <[email protected]>
iwlwifi: mvm: Use div_s64 instead of do_div in iwl_mvm_ftm_rtt_smoothing()
Paul Blakey <[email protected]>
net: openvswitch: Fix ct_state nat flags for conns arriving from tc
Paul Blakey <[email protected]>
net: openvswitch: Fix matching zone id for invalid conns arriving from tc
Paul Blakey <[email protected]>
net/sched: flow_dissector: Fix matching on zone id for invalid conns
Dominik Brodowski <[email protected]>
pcmcia: fix setting of kthread task states
Lad Prabhakar <[email protected]>
can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device
Jiasheng Jiang <[email protected]>
can: xilinx_can: xcan_probe(): check for error irq
Marc Kleine-Budde <[email protected]>
can: softing: softing_startstop(): fix set but not used variable warning
Christophe Jaillet <[email protected]>
tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'
Chen Jun <[email protected]>
tpm: add request_locality before write TPM_INT_ENABLE
Marc Kleine-Budde <[email protected]>
can: mcp251xfd: add missing newline to printed strings
Vladimir Oltean <[email protected]>
net: mscc: ocelot: fix incorrect balancing with down LAG ports
Fabio Estevam <[email protected]>
regmap: Call regmap_debugfs_exit() prior to _init()
Dan Carpenter <[email protected]>
netrom: fix api breakage in nr_setsockopt()
Dan Carpenter <[email protected]>
ax25: uninitialized variable in ax25_setsockopt()
Subbaraya Sundeep <[email protected]>
octeontx2-af: Increment ptp refcount before use
Miaoqian Lin <[email protected]>
spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe
Geliang Tang <[email protected]>
mptcp: fix a DSS option writing error
Matthieu Baerts <[email protected]>
mptcp: fix opt size when sending DSS + MP_FAIL
Paolo Abeni <[email protected]>
mptcp: fix per socket endpoint accounting
Dan Carpenter <[email protected]>
Bluetooth: L2CAP: uninitialized variables in l2cap_sock_setsockopt()
Zizhuang Deng <[email protected]>
lib/mpi: Add the return value check of kcalloc()
Moshe Shemesh <[email protected]>
net/mlx5: Set command entry semaphore up once got index free
Maor Dickman <[email protected]>
net/mlx5e: Sync VXLAN udp ports during uplink representor profile change
Shay Drory <[email protected]>
net/mlx5: Fix access to sf_dev_table on allocation failure
Paul Blakey <[email protected]>
net/mlx5e: Fix matching on modified inner ip_ecn bits
Aya Levin <[email protected]>
Revert "net/mlx5e: Block offload of outer header csum for GRE tunnel"
Aya Levin <[email protected]>
Revert "net/mlx5e: Block offload of outer header csum for UDP tunnels"
Maor Dickman <[email protected]>
net/mlx5e: Don't block routes with nexthop objects in SW
Maor Dickman <[email protected]>
net/mlx5e: Fix wrong usage of fib_info_nh when routes with nexthop objects are used
Aya Levin <[email protected]>
net/mlx5e: Fix page DMA map/unmap attributes
Huang Rui <[email protected]>
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
Valentin Caron <[email protected]>
serial: stm32: move tx dma terminate DMA to shutdown
Alyssa Ross <[email protected]>
serial: liteuart: fix MODULE_ALIAS
Miaoqian Lin <[email protected]>
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
Michal Suchanek <[email protected]>
debugfs: lockdown: Allow reading debugfs files that are not world readable
José Expósito <[email protected]>
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_frame_init_v1_buttonpad
José Expósito <[email protected]>
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_init
José Expósito <[email protected]>
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_desc
José Expósito <[email protected]>
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_init
Pavel Hofman <[email protected]>
usb: gadget: u_audio: Subdevice 0 for capture ctls
John Keeping <[email protected]>
usb: dwc2: gadget: initialize max_speed from params
Dinh Nguyen <[email protected]>
usb: dwc2: do not gate off the hardware if it does not support clock gating
Miaoqian Lin <[email protected]>
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
Wen Gu <[email protected]>
net/smc: Reset conn->lgr when link group registration fails
Miaoqian Lin <[email protected]>
Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe
Jiasheng Jiang <[email protected]>
Bluetooth: hci_bcm: Check for error irq
Jiasheng Jiang <[email protected]>
fsl/fman: Check for null pointer after calling devm_ioremap
Jiasheng Jiang <[email protected]>
staging: greybus: audio: Check null pointer
Dan Carpenter <[email protected]>
rocker: fix a sleeping in atomic bug
Eric Dumazet <[email protected]>
ppp: ensure minimum packet size in ppp_write()
Miroslav Lichvar <[email protected]>
net: fix SOF_TIMESTAMPING_BIND_PHC to work with multiple sockets
Florian Westphal <[email protected]>
netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone
Pablo Neira Ayuso <[email protected]>
netfilter: nft_payload: do not update layer 4 checksum when mangling fragments
Kuniyuki Iwashima <[email protected]>
bpf: Fix SO_RCVBUF/SO_SNDBUF handling in _bpf_setsockopt().
Kris Van Hees <[email protected]>
bpf: Fix verifier support for validation of async callbacks
Daniel Borkmann <[email protected]>
bpf: Don't promote bogus looking registers after null check.
John Fastabend <[email protected]>
bpf, sockmap: Fix double bpf_prog_put on error case in map_link
John Fastabend <[email protected]>
bpf, sockmap: Fix return codes from tcp_bpf_recvmsg_parser()
Xin Xiong <[email protected]>
netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()
Vladimir Oltean <[email protected]>
net: dsa: fix incorrect function pointer check for MRP ring roles
Daniel Golle <[email protected]>
net: ethernet: mtk_eth_soc: fix return values and refactor MDIO ops
Raed Salem <[email protected]>
net/xfrm: IPsec tunnel mode fix inner_ipproto setting in sec_path
Jiasheng Jiang <[email protected]>
power: reset: mt6397: Check for null res pointer
Zhou Qingyang <[email protected]>
pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()
Zhou Qingyang <[email protected]>
pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()
Hans de Goede <[email protected]>
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
Lad Prabhakar <[email protected]>
serial: 8250_bcm7271: Propagate error codes from brcmuart_probe()
Pavel Begunkov <[email protected]>
io_uring: remove double poll on poll update
Zhang Zixun <[email protected]>
x86/mce/inject: Avoid out-of-bounds write when setting flags
Arseny Demidov <[email protected]>
hwmon: (mr75203) fix wrong power-up delay value
Marijn Suijten <[email protected]>
regulator: qcom-labibb: OCP interrupts are not a failure while disabled
Dan Carpenter <[email protected]>
crypto: octeontx2 - prevent underflow in get_cores_bmap()
Nathan Chancellor <[email protected]>
x86/boot/compressed: Move CLANG_FLAGS to beginning of KBUILD_CFLAGS
Panicker Harish <[email protected]>
Bluetooth: hci_qca: Stop IBS timer during BT OFF
Clément Léger <[email protected]>
software node: fix wrong node passed to find nargs_prop
Marijn Suijten <[email protected]>
backlight: qcom-wled: Respect enabled-strings in set_brightness
Marijn Suijten <[email protected]>
backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion
Marijn Suijten <[email protected]>
backlight: qcom-wled: Override default length with qcom,enabled-strings
Marijn Suijten <[email protected]>
backlight: qcom-wled: Fix off-by-one maximum with default num_strings
Marijn Suijten <[email protected]>
backlight: qcom-wled: Pass number of elements to read to read_u32_array
Marijn Suijten <[email protected]>
backlight: qcom-wled: Validate enabled string indices in DT
Paul Chaignon <[email protected]>
bpftool: Enable line buffering for stdout
Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix using wrong mode
Johannes Berg <[email protected]>
um: virtio_uml: Fix time-travel external time propagation
Johannes Berg <[email protected]>
lib/logic_iomem: Fix operation on 32-bit
Johannes Berg <[email protected]>
lib/logic_iomem: Fix 32-bit build
Johannes Berg <[email protected]>
um: virt-pci: Fix 32-bit compile
Johannes Berg <[email protected]>
um: rename set_signals() to um_set_signals()
Johannes Berg <[email protected]>
um: fix ndelay/udelay defines
Bernard Zhao <[email protected]>
selinux: fix potential memleak in selinux_add_opt()
Christoph Hellwig <[email protected]>
block: fix error unwinding in device_add_disk
Sergey Shtylyov <[email protected]>
mmc: meson-mx-sdio: add IRQ check
Sergey Shtylyov <[email protected]>
mmc: meson-mx-sdhc: add IRQ check
Avraham Stern <[email protected]>
iwlwifi: mvm: set protected flag only for NDP ranging
Avraham Stern <[email protected]>
iwlwifi: mvm: perform 6GHz passive scan after suspend
Nathan Errera <[email protected]>
iwlwifi: mvm: test roc running status bits before removing the sta
Johannes Berg <[email protected]>
iwlwifi: mvm: fix 32-bit build in FTM
Kai-Heng Feng <[email protected]>
rtw88: Disable PCIe ASPM while doing NAPI poll on 8821CE
Ping-Ke Shih <[email protected]>
rtw88: add quirk to disable pci caps on HP 250 G7 Notebook PC
Dan Carpenter <[email protected]>
wilc1000: fix double free error in probe()
Sean Wang <[email protected]>
mt76: mt7921: drop offload_flags overwritten
Marek Behún <[email protected]>
ARM: dts: armada-38x: Add generic compatible to UART nodes
Robert Marko <[email protected]>
arm64: dts: marvell: cn9130: enable CP0 GPIO controllers
Robert Marko <[email protected]>
arm64: dts: marvell: cn9130: add GPIO and SPI aliases
Wei Yongjun <[email protected]>
usb: ftdi-elan: fix memory leak on device disconnect
Andre Przywara <[email protected]>
ARM: 9159/1: decompressor: Avoid UNPREDICTABLE NOP encoding
Antony Antony <[email protected]>
xfrm: state and policy should fail if XFRMA_IF_ID 0
Antony Antony <[email protected]>
xfrm: interface with if_id 0 should return error
Jernej Skrabec <[email protected]>
media: hantro: Fix probe func error path
Robin Murphy <[email protected]>
drm/tegra: vic: Fix DMA API misuse
Thierry Reding <[email protected]>
drm/tegra: gr2d: Explicitly control module reset
Arnd Bergmann <[email protected]>
gpu: host1x: select CONFIG_DMA_SHARED_BUFFER
Stephen Boyd <[email protected]>
drm/bridge: ti-sn65dsi86: Set max register for regmap
Dmitry Baryshkov <[email protected]>
drm/msm/dpu: fix safe status debugfs file
Baruch Siach <[email protected]>
arm64: dts: qcom: ipq6018: Fix gpio-ranges property
Srinivas Kandagatla <[email protected]>
arm64: dts: qcom: c630: Fix soundcard setup
Kurt Kanzenbach <[email protected]>
net: dsa: hellcreek: Add missing PTP via UDP rules
Kurt Kanzenbach <[email protected]>
net: dsa: hellcreek: Allow PTP P2P measurements on blocked ports
Kurt Kanzenbach <[email protected]>
net: dsa: hellcreek: Add STP forwarding rule
Kurt Kanzenbach <[email protected]>
net: dsa: hellcreek: Fix insertion of static FDB entries
Zhou Qingyang <[email protected]>
ath11k: Fix a NULL pointer dereference in ath11k_mac_op_hw_scan()
Jiasheng Jiang <[email protected]>
media: coda/imx-vdoa: Handle dma_set_coherent_mask error codes
Wang Hai <[email protected]>
media: msi001: fix possible null-ptr-deref in msi001_probe()
Anton Vasilyev <[email protected]>
media: dw2102: Fix use after free
Robin Murphy <[email protected]>
perf/arm-cmn: Fix CPU hotplug unregistration
Christian Lamparter <[email protected]>
ARM: dts: gemini: NAS4220-B: fis-index-block with 128 KiB sectors
Hector Martin <[email protected]>
spi: Fix incorrect cs_setup delay handling
Rameshkumar Sundaram <[email protected]>
ath11k: Fix deleting uninitialized kernel timer during fragment cache flush
Weili Qian <[email protected]>
crypto: hisilicon/qm - fix incorrect return value of hisi_qm_resume()
Herbert Xu <[email protected]>
crypto: stm32 - Revert broken pm_runtime_resume_and_get changes
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix bugs and crash in tests
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix lrw chaining mode
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix double pm exit
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - check early input data
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix xts and race condition in crypto_engine requests
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix CTR counter carry
Jakub Kicinski <[email protected]>
selftests: harness: avoid false negatives if test has no ASSERTs
Anders Roxell <[email protected]>
selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST
Kees Cook <[email protected]>
x86/uaccess: Move variable into switch case statement
Eric Dumazet <[email protected]>
xfrm: fix a small bug in xfrm_sa_len()
Brian Norris <[email protected]>
mwifiex: Fix possible ABBA deadlock
Dmitry Baryshkov <[email protected]>
drm/msm/dsi: fix initialization in the bonded DSI case
Loic Poulain <[email protected]>
wcn36xx: Fix max channels retrieval
Frederic Weisbecker <[email protected]>
rcu/exp: Mark current CPU as exp-QS in IPI loop second pass
Jackie Liu <[email protected]>
drm/msm/dp: displayPort driver need algorithm rational
Rob Clark <[email protected]>
drm/msm/gpu: Don't allow zero fence_id
Nicholas Kazlauskas <[email protected]>
drm/amd/display: Fix out of bounds access on DNC31 stream encoder regs
Wayne Lin <[email protected]>
drm/amd/display: Fix bug in debugfs crc_win_update entry
Mark Chen <[email protected]>
Bluetooth: btusb: Handle download_firmware failure cases
Luiz Augusto von Dentz <[email protected]>
Bluetooth: MGMT: Use hci_dev_test_and_{set,clear}_flag
Joseph Hwang <[email protected]>
Bluetooth: refactor set_exp_feature with a feature table
Fabio Estevam <[email protected]>
ath10k: Fix the MTU size on QCA9377 SDIO
Li Hua <[email protected]>
sched/rt: Try to restart rt period timer when rt runtime exceeded
Lv Yunlong <[email protected]>
wireless: iwlwifi: Fix a double free in iwl_txq_dyn_alloc_dma
Robert Schlabbach <[email protected]>
media: si2157: Fix "warm" tuner state detection
Zhou Qingyang <[email protected]>
media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()
Zhou Qingyang <[email protected]>
media: dib8000: Fix a memleak in dib8000_init()
Alexander Lobakin <[email protected]>
samples: bpf: Fix 'unknown warning group' build warning on Clang
Alexander Lobakin <[email protected]>
samples: bpf: Fix xdp_sample_user.o linking with Clang
Andrii Nakryiko <[email protected]>
samples/bpf: Clean up samples/bpf build failes
Quentin Monnet <[email protected]>
samples/bpf: Install libbpf headers when building
Reiji Watanabe <[email protected]>
arm64: mte: DC {GVA,GZVA} shouldn't be used when DCZID_EL0.DZP == 1
Reiji Watanabe <[email protected]>
arm64: clear_page() shouldn't use DC ZVA when DCZID_EL0.DZP == 1
Kajol Jain <[email protected]>
bpf: Remove config check to enable bpf support for branch records
Hou Tao <[email protected]>
bpf: Disallow BPF_LOG_KERNEL log level for bpf(BPF_BTF_LOAD)
Alexei Starovoitov <[email protected]>
bpf: Adjust BTF log size limit.
Vincent Donnefort <[email protected]>
sched/fair: Fix per-CPU kthread and wakee stacking for asym CPU capacity
Vincent Donnefort <[email protected]>
sched/fair: Fix detection of per-CPU kthreads waking a task
Maxim Mikityanskiy <[email protected]>
bpf: Fix the test_task_vma selftest to support output shorter than 1 kB
Sean Wang <[email protected]>
Bluetooth: btmtksdio: fix resume failure
Yang Yingliang <[email protected]>
staging: rtl8192e: rtllib_module: fix error handle case in alloc_rtllib()
Yang Yingliang <[email protected]>
staging: rtl8192e: return error code from rtllib_softmac_init()
Tasos Sahanidis <[email protected]>
floppy: Fix hang in watchdog when disk is ejected
Michael Walle <[email protected]>
mtd: core: provide unique name for nvmem device
Lino Sanfilippo <[email protected]>
serial: amba-pl011: do not request memory region twice
Lizhi Hou <[email protected]>
tty: serial: uartlite: allow 64 bit address
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am642: Fix the L2 cache sets
Gaurav Jain <[email protected]>
crypto: caam - save caam memory to support crypto engine retry mechanism.
Alexei Starovoitov <[email protected]>
libbpf: Clean gen_loader's attach kind.
Zhou Qingyang <[email protected]>
drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()
Zhou Qingyang <[email protected]>
drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()
Paul Gerber <[email protected]>
thermal/drivers/imx8mm: Enable ADC when enabling monitor
Rafael J. Wysocki <[email protected]>
ACPI: EC: Rework flushing of EC work while suspended to idle
William Kucharski <[email protected]>
cgroup: Trace event cgroup id fields should be u64
Zack Rusin <[email protected]>
drm/vmwgfx: Fail to initialize on broken configs
Zack Rusin <[email protected]>
drm/vmwgfx: Remove the deprecated lower mem limit
Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: msm8916: fix MMC controller aliases
Mark Rutland <[email protected]>
powerpc: Avoid discarding flags in system_call_exception()
Florian Westphal <[email protected]>
netfilter: bridge: add support for pppoe filtering
Jesper Dangaard Brouer <[email protected]>
igc: AF_XDP zero-copy metadata adjust breaks SKBs on XDP_PASS
Oleksij Rempel <[email protected]>
thermal/drivers/imx: Implement runtime PM support
Bhupesh Sharma <[email protected]>
net: stmmac: Add platform level debug register dump feature
Christophe JAILLET <[email protected]>
media: venus: core: Fix a resource leak in the error handling path of 'venus_probe()'
Christophe JAILLET <[email protected]>
media: venus: core: Fix a potential NULL pointer dereference in an error handling path
Mansur Alisha Shaik <[email protected]>
media: venus: correct low power frequency calculation for encoder
Philipp Zabel <[email protected]>
media: coda: fix CODA960 JPEG encoder buffer overflow
Chen-Yu Tsai <[email protected]>
media: hantro: Hook up RK3399 JPEG encoder output
Dafna Hirschfeld <[email protected]>
media: mtk-vcodec: call v4l2_m2m_ctx_release first when file is released
Yang Yingliang <[email protected]>
media: si470x-i2c: fix possible memory leak in si470x_i2c_probe()
Fabio Estevam <[email protected]>
media: imx-pxp: Initialize the spinlock prior to using it
Suresh Udipi <[email protected]>
media: rcar-csi2: Correct the selection of hsfreqrange
Hans de Goede <[email protected]>
media: i2c: ov8865: Fix lockdep error
Daniel Scally <[email protected]>
media: i2c: Re-order runtime pm initialisation
Eugen Hristev <[email protected]>
media: i2c: imx274: fix s_frame_interval runtime resume not requested
Alan Maguire <[email protected]>
libbpf: Silence uninitialized warning/error in btf_dump_dump_type_data
Jan Kara <[email protected]>
bfq: Do not let waker requests skip proper accounting
Claudiu Beznea <[email protected]>
mfd: atmel-flexcom: Use .resume_noirq
Claudiu Beznea <[email protected]>
mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP
Tudor Ambarus <[email protected]>
tty: serial: atmel: Call dma_async_issue_pending()
Tudor Ambarus <[email protected]>
tty: serial: atmel: Check return code of dmaengine_submit()
Peng Fan <[email protected]>
arm64: dts: ti: k3-j721e: correct cache-sets info
Anilkumar Kolli <[email protected]>
ath11k: Use host CE parameters for CE interrupts configuration
Giovanni Cabiddu <[email protected]>
crypto: qat - fix undetected PFVF timeout in ACK loop
Marco Chiappero <[email protected]>
crypto: qat - make pfvf send message direction agnostic
Marco Chiappero <[email protected]>
crypto: qat - remove unnecessary collision prevention step in PFVF
Andrii Nakryiko <[email protected]>
libbpf: Fix using invalidated memory in bpf_linker
Andrii Nakryiko <[email protected]>
libbpf: Fix glob_syms memory leak in bpf_linker
Andrii Nakryiko <[email protected]>
libbpf: Fix potential misaligned memory access in btf_ext__new()
Dillon Min <[email protected]>
ARM: dts: stm32: fix dtbs_check warning on ili9341 dts binding on stm32f429 disco
Vladimir Zapolskiy <[email protected]>
cpufreq: qcom-hw: Fix probable nested interrupt handling
Lukasz Luba <[email protected]>
cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure
George G. Davis <[email protected]>
mtd: hyperbus: rpc-if: fix bug in rpcif_hb_remove
Prasad Malisetty <[email protected]>
arm64: dts: qcom: sc7280: Fix incorrect clock name
Chengfeng Ye <[email protected]>
crypto: qce - fix uaf on qce_skcipher_register_one
Chengfeng Ye <[email protected]>
crypto: qce - fix uaf on qce_ahash_register_one
Chengfeng Ye <[email protected]>
crypto: qce - fix uaf on qce_aead_register_one
Tudor Ambarus <[email protected]>
crypto: atmel-aes - Reestablish the correct tfm context at dequeue
Wang Hai <[email protected]>
media: dmxdev: fix UAF when dvb_register_device() fails
Biju Das <[email protected]>
arm64: dts: renesas: cat875: Add rx/tx delays
Dan Carpenter <[email protected]>
drm/vboxvideo: fix a NULL vs IS_ERR() check
Lyude Paul <[email protected]>
drm/dp: Don't read back backlight mode in drm_edp_backlight_enable()
Alexander Aring <[email protected]>
fs: dlm: fix build with CONFIG_IPV6 disabled
Jens Wiklander <[email protected]>
tee: fix put order in teedev_close_context()
oujiefeng <[email protected]>
spi: hisi-kunpeng: Fix the debugfs directory name incorrect
Karthikeyan Kathirvel <[email protected]>
ath11k: reset RSN/WPA present state for open BSS
Karthikeyan Kathirvel <[email protected]>
ath11k: clear the keys properly via DISABLE_KEY
Sven Eckelmann <[email protected]>
ath11k: Fix ETSI regd with weather radar overlap
Pavel Skripkin <[email protected]>
Bluetooth: stop proccessing malicious adv data
Lad Prabhakar <[email protected]>
memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails
Alexander Aring <[email protected]>
fs: dlm: don't call kernel_getpeername() in error_report()
Christian Hewitt <[email protected]>
arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
Christian Hewitt <[email protected]>
arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
Alexander Stein <[email protected]>
arm64: dts: amlogic: Fix SPI NOR flash node name for ODROID N2/N2+
Alexander Stein <[email protected]>
arm64: dts: amlogic: meson-g12: Fix GPU operating point table node name
Jammy Huang <[email protected]>
media: aspeed: Update signal status immediately to ensure sane hw state
Dongliang Mu <[email protected]>
media: em28xx: fix memory leak in em28xx_init_dev
Jammy Huang <[email protected]>
media: aspeed: fix mode-detect always time out at 2nd run
Dan Carpenter <[email protected]>
media: atomisp: fix uninitialized bug in gmin_get_pmic_id_and_addr()
Mauro Carvalho Chehab <[email protected]>
media: atomisp: fix enum formats logic
Tsuchiya Yuto <[email protected]>
media: atomisp: add NULL check for asd obtained from atomisp_video_pipe
Tsuchiya Yuto <[email protected]>
media: atomisp: fix ifdefs in sh_css.c
Tsuchiya Yuto <[email protected]>
media: atomisp: fix inverted error check for ia_css_mipi_is_source_port_valid()
Tsuchiya Yuto <[email protected]>
media: atomisp: do not use err var when checking port validity for ISP2400
Tsuchiya Yuto <[email protected]>
media: atomisp: fix inverted logic in buffers_needed()
Tsuchiya Yuto <[email protected]>
media: atomisp: fix punit_ddr_dvfs_enable() argument for mrfld_power up case
Tsuchiya Yuto <[email protected]>
media: atomisp: add missing media_device_cleanup() in atomisp_unregister_entities()
Dillon Min <[email protected]>
media: videobuf2: Fix the size printk format
Lad Prabhakar <[email protected]>
mtd: hyperbus: rpc-if: Check return value of rpcif_sw_init()
Quentin Monnet <[email protected]>
bpftool: Fix memory leak in prog_dump()
Rameshkumar Sundaram <[email protected]>
ath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware
Benjamin Li <[email protected]>
wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
Benjamin Li <[email protected]>
wcn36xx: populate band before determining rate on RX
Bryan O'Donoghue <[email protected]>
wcn36xx: Put DXE block into reset before freeing memory
Bryan O'Donoghue <[email protected]>
wcn36xx: Release DMA channel descriptor allocations
Bryan O'Donoghue <[email protected]>
wcn36xx: Fix DMA channel enable/disable cycle
Andrii Nakryiko <[email protected]>
libbpf: Free up resources used by inner map definition
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Enable the scrambler on reconnection
Bryan O'Donoghue <[email protected]>
wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND
Benjamin Li <[email protected]>
wcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan
Maxime Ripard <[email protected]>
drm/vc4: crtc: Make sure the HDMI controller is powered when disabling
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Rework the pre_crtc_configure error handling
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Make sure the controller is powered up during bind
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Make sure the controller is powered in detect
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Set a default HSM rate
Maxime Ripard <[email protected]>
clk: bcm-2835: Remove rounding up the dividers
Maxime Ripard <[email protected]>
clk: bcm-2835: Pick the closest clock rate
Wang Hai <[email protected]>
Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails
Soenke Huster <[email protected]>
Bluetooth: virtio_bt: fix memory leak in virtbt_rx_handle()
Brian Norris <[email protected]>
drm/rockchip: dsi: Reconfigure hardware on resume()
Brian Norris <[email protected]>
drm/rockchip: dsi: Disable PLL clock on bind error
Brian Norris <[email protected]>
drm/rockchip: dsi: Hold pm-runtime across bind/unbind
Brian Norris <[email protected]>
drm/rockchip: dsi: Fix unbalanced clock on probe error
Brian Norris <[email protected]>
drm/panel: innolux-p079zca: Delete panel on attach() failure
Brian Norris <[email protected]>
drm/panel: kingdisplay-kd097d04: Delete panel on attach() failure
Wang Hai <[email protected]>
drm: fix null-ptr-deref in drm_dev_init_release()
Dan Carpenter <[email protected]>
drm/bridge: display-connector: fix an uninitialized pointer in probe()
Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix not initializing sk_peer_pid
xinhui pan <[email protected]>
drm/ttm: Put BO in its memory manager's lru list
Gang Li <[email protected]>
shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode
Wen Gong <[email protected]>
ath11k: add string type to search board data in board-2.bin for WCN6855
Baoquan He <[email protected]>
mm/page_alloc.c: do not warn allocation failure on zone DMA if no managed pages
Baoquan He <[email protected]>
dma/pool: create dma atomic pool only if dma zone has managed pages
Baoquan He <[email protected]>
mm_zone: add function to check if managed dma zone exists
Yifeng Li <[email protected]>
PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
Thomas Hellström <[email protected]>
dma_fence_array: Fix PENDING_ERROR leak in dma_fence_array_signaled()
Peng Hao <[email protected]>
virtio/virtio_mem: handle a possible NULL as a memcpy parameter
Dmitry Osipenko <[email protected]>
drm/tegra: Add back arm_iommu_detach_device()
Dmitry Osipenko <[email protected]>
gpu: host1x: Add back arm_iommu_detach_device()
Yunfei Wang <[email protected]>
iommu/io-pgtable-arm-v7s: Add error handle for page table allocation failure
Hari Prasath <[email protected]>
ARM: dts: at91: update alternate function of signal PD20
D Scott Phillips <[email protected]>
arm64: errata: Fix exec handling in erratum 1418040 workaround
Dan Williams <[email protected]>
cxl/pmem: Fix reference counting for delayed work
Manivannan Sadhasivam <[email protected]>
bus: mhi: core: Fix race while handling SYS_ERR at power up
Bhaumik Bhatt <[email protected]>
bus: mhi: core: Fix reading wake_capable channel configuration
Loic Poulain <[email protected]>
bus: mhi: pci_generic: Graceful shutdown on freeze
Christophe Leroy <[email protected]>
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
Jonathan Cameron <[email protected]>
iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046
Jonathan Cameron <[email protected]>
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
Alexander Usyskin <[email protected]>
mei: hbm: fix client dma reply status
Johan Hovold <[email protected]>
can: softing_cs: softingcs_probe(): fix memleak on registration failure
Hans Verkuil <[email protected]>
media: cec-pin: fix interrupt en/disable handling
Johan Hovold <[email protected]>
media: stk1160: fix control-message timeouts
Johan Hovold <[email protected]>
media: pvrusb2: fix control-message timeouts
Johan Hovold <[email protected]>
media: redrat3: fix control-message timeouts
Michael Kuron <[email protected]>
media: dib0700: fix undefined behavior in tuner shutdown
Johan Hovold <[email protected]>
media: s2255: fix control-message timeouts
Johan Hovold <[email protected]>
media: cpia2: fix control-message timeouts
Johan Hovold <[email protected]>
media: em28xx: fix control-message timeouts
Johan Hovold <[email protected]>
media: mceusb: fix control-message timeouts
Johan Hovold <[email protected]>
media: flexcop-usb: fix control-message timeouts
Hans Verkuil <[email protected]>
media: v4l2-ioctl.c: readbuffers depends on V4L2_CAP_READWRITE
Sakari Ailus <[email protected]>
media: ov8865: Disable only enabled regulators on error path
Hans Verkuil <[email protected]>
media: cec: fix a deadlock situation
Namjae Jeon <[email protected]>
ksmbd: add reserved room in ipc request/response
Namjae Jeon <[email protected]>
ksmbd: limits exceeding the maximum allowable outstanding requests
Namjae Jeon <[email protected]>
ksmbd: move credit charge deduction under processing request
Namjae Jeon <[email protected]>
ksmbd: add support for smb2 max credit parameter
Namjae Jeon <[email protected]>
ksmbd: fix guest connection failure with nautilus
Dan Carpenter <[email protected]>
ksmbd: uninitialized variable in create_socket()
Mohammad Athari Bin Ismail <[email protected]>
net: phy: marvell: add Marvell specific PHY loopback
Mateusz Jończyk <[email protected]>
rtc: cmos: take rtc_lock while reading from CMOS
Willy Tarreau <[email protected]>
tools/nolibc: fix incorrect truncation of exit code
Willy Tarreau <[email protected]>
tools/nolibc: i386: fix initial stack alignment
Jakub Kicinski <[email protected]>
crypto: x86/aesni - don't require alignment of data
Ammar Faizi <[email protected]>
tools/nolibc: x86-64: Fix startup code bug
Lucas De Marchi <[email protected]>
x86/gpu: Reserve stolen memory for first integrated Intel GPU
Jisheng Zhang <[email protected]>
riscv: mm: fix wrong phys_ram_base value for RV64
Nick Kossifidis <[email protected]>
riscv: use hart id instead of cpu id on machine_kexec
Nick Kossifidis <[email protected]>
riscv: Don't use va_pa_offset on kdump
Nick Kossifidis <[email protected]>
riscv: try to allocate crashkern region from 32bit addressible memory
Sean Christopherson <[email protected]>
RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
Alexandre Ghiti <[email protected]>
riscv: Get rid of MAXPHYSMEM configs
Paul Cercueil <[email protected]>
mtd: rawnand: ingenic: JZ4740 needs 'oob_first' read page function
Paul Cercueil <[email protected]>
mtd: rawnand: Export nand_read_page_hwecc_oob_first()
Paul Cercueil <[email protected]>
mtd: rawnand: davinci: Rewrite function description
Paul Cercueil <[email protected]>
mtd: rawnand: davinci: Avoid duplicated page read
Paul Cercueil <[email protected]>
mtd: rawnand: davinci: Don't calculate ECC when reading page
Andreas Oetken <[email protected]>
mtd: Fixed breaking list in __mtd_del_partition.
Stefan Riedmueller <[email protected]>
mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6
Christian Eggers <[email protected]>
mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings
Krzysztof Kozlowski <[email protected]>
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
Jaegeuk Kim <[email protected]>
f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
Chao Yu <[email protected]>
f2fs: fix to do sanity check in is_alive()
Chao Yu <[email protected]>
f2fs: fix to do sanity check on inode type during garbage collection
Takashi Iwai <[email protected]>
ALSA: core: Fix SSID quirk lookup for subvendor=0
Jason Gerecke <[email protected]>
HID: wacom: Avoid using stale array indicies to read contact count
Jason Gerecke <[email protected]>
HID: wacom: Ignore the confidence flag when a touch is removed
Jason Gerecke <[email protected]>
HID: wacom: Reset expected and received contact counts at the same time
Jann Horn <[email protected]>
HID: uhid: Fix worker destroying device without any protection
Karl Kurbjun <[email protected]>
HID: Ignore battery for Elan touchscreen on HP Envy X360 15t-dr100
Marcelo Tosatti <[email protected]>
KVM: VMX: switch blocked_vcpu_on_cpu_lock to raw spinlock
David Matlack <[email protected]>
KVM: x86/mmu: Fix write-protection of PTs mapped by the TDP MMU
-------------
Diffstat:
Documentation/admin-guide/cifs/usage.rst | 7 +-
Documentation/admin-guide/devices.txt | 8 +-
Documentation/admin-guide/hw-vuln/spectre.rst | 2 +-
.../bindings/display/amlogic,meson-dw-hdmi.yaml | 5 +
.../bindings/display/amlogic,meson-vpu.yaml | 6 +
.../devicetree/bindings/input/hid-over-i2c.txt | 2 +
.../devicetree/bindings/thermal/thermal-zones.yaml | 9 +-
.../devicetree/bindings/watchdog/samsung-wdt.yaml | 5 +-
Documentation/driver-api/dmaengine/dmatest.rst | 7 +-
Documentation/driver-api/firewire.rst | 4 +-
.../acpi/dsd/data-node-references.rst | 10 +-
Documentation/trace/coresight/coresight-config.rst | 16 +-
Makefile | 4 +-
arch/arm/Kconfig.debug | 14 +-
arch/arm/boot/compressed/efi-header.S | 22 +-
arch/arm/boot/compressed/head.S | 3 +-
arch/arm/boot/dts/armada-38x.dtsi | 4 +-
arch/arm/boot/dts/gemini-nas4220b.dts | 2 +-
arch/arm/boot/dts/omap3-n900.dts | 50 +-
arch/arm/boot/dts/qcom-sdx55.dtsi | 6 +-
arch/arm/boot/dts/sama7g5-pinfunc.h | 2 +-
arch/arm/boot/dts/stm32f429-disco.dts | 2 +-
arch/arm/configs/cm_x300_defconfig | 1 -
arch/arm/configs/ezx_defconfig | 1 -
arch/arm/configs/imote2_defconfig | 1 -
arch/arm/configs/nhk8815_defconfig | 1 -
arch/arm/configs/pxa_defconfig | 1 -
arch/arm/configs/spear13xx_defconfig | 1 -
arch/arm/configs/spear3xx_defconfig | 1 -
arch/arm/configs/spear6xx_defconfig | 1 -
arch/arm/include/debug/imx-uart.h | 18 +-
arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 5 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
.../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 3 +
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +-
arch/arm64/boot/dts/marvell/cn9130.dtsi | 15 +
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 5 +-
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 -
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 27 +
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
arch/arm64/boot/dts/renesas/cat875.dtsi | 1 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 6 +-
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 6 +-
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 6 +-
arch/arm64/boot/dts/renesas/r8a77951.dtsi | 6 +-
arch/arm64/boot/dts/renesas/r8a77960.dtsi | 6 +-
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 6 +-
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 6 +-
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 4 +-
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 10 +-
arch/arm64/boot/dts/ti/k3-am642.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 6 +-
arch/arm64/include/asm/extable.h | 9 -
arch/arm64/include/asm/memory.h | 5 +-
arch/arm64/include/asm/mte-kasan.h | 8 +-
arch/arm64/kernel/process.c | 39 +-
arch/arm64/kernel/traps.c | 2 +-
arch/arm64/lib/clear_page.S | 10 +
arch/arm64/lib/mte.S | 8 +-
arch/arm64/mm/ptdump.c | 2 -
arch/arm64/net/bpf_jit_comp.c | 7 +-
arch/mips/Kconfig | 6 +-
arch/mips/bcm63xx/clk.c | 6 +
arch/mips/boot/compressed/Makefile | 2 +-
arch/mips/boot/compressed/clz_ctz.c | 2 +
arch/mips/cavium-octeon/octeon-platform.c | 2 +
arch/mips/cavium-octeon/octeon-usb.c | 1 +
arch/mips/configs/fuloong2e_defconfig | 1 -
arch/mips/configs/malta_qemu_32r6_defconfig | 1 -
arch/mips/configs/maltaaprp_defconfig | 1 -
arch/mips/configs/maltasmvp_defconfig | 1 -
arch/mips/configs/maltasmvp_eva_defconfig | 1 -
arch/mips/configs/maltaup_defconfig | 1 -
.../asm/mach-loongson64/kernel-entry-init.h | 4 +-
arch/mips/include/asm/octeon/cvmx-bootinfo.h | 4 +-
arch/mips/lantiq/clk.c | 6 +
arch/openrisc/include/asm/syscalls.h | 2 +
arch/openrisc/kernel/entry.S | 5 +
arch/parisc/include/asm/special_insns.h | 44 +-
arch/parisc/kernel/traps.c | 2 +-
arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi | 2 +
arch/powerpc/configs/ppc6xx_defconfig | 1 -
arch/powerpc/configs/pseries_defconfig | 1 -
arch/powerpc/include/asm/hw_irq.h | 40 +
arch/powerpc/kernel/btext.c | 4 +-
arch/powerpc/kernel/fadump.c | 8 +
arch/powerpc/kernel/head_40x.S | 9 +-
arch/powerpc/kernel/interrupt.c | 2 +-
arch/powerpc/kernel/interrupt_64.S | 10 +-
arch/powerpc/kernel/module.c | 11 +-
arch/powerpc/kernel/prom_init.c | 2 +-
arch/powerpc/kernel/smp.c | 42 +
arch/powerpc/kernel/watchdog.c | 41 +-
arch/powerpc/kvm/book3s_hv.c | 8 +-
arch/powerpc/kvm/book3s_hv_nested.c | 2 +-
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 +-
arch/powerpc/mm/kasan/book3s_32.c | 3 +-
arch/powerpc/mm/pgtable_64.c | 14 +-
arch/powerpc/perf/core-book3s.c | 58 +-
arch/powerpc/platforms/cell/iommu.c | 1 +
arch/powerpc/platforms/cell/pervasive.c | 1 +
arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 1 +
arch/powerpc/platforms/powermac/low_i2c.c | 3 +
arch/powerpc/platforms/powernv/opal-lpc.c | 1 +
arch/powerpc/sysdev/xive/spapr.c | 3 +
arch/riscv/Kconfig | 23 +-
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 3 -
arch/riscv/configs/nommu_k210_defconfig | 2 -
arch/riscv/configs/nommu_k210_sdcard_defconfig | 2 -
arch/riscv/configs/nommu_virt_defconfig | 1 -
arch/riscv/include/asm/smp.h | 10 +-
arch/riscv/kernel/kexec_relocate.S | 20 +-
arch/riscv/kernel/machine_kexec.c | 3 +-
arch/riscv/kernel/setup.c | 10 +
arch/riscv/kernel/smp.c | 10 -
arch/riscv/mm/init.c | 19 +-
arch/s390/mm/pgalloc.c | 4 +-
arch/sh/configs/titan_defconfig | 1 -
arch/um/.gitignore | 1 +
arch/um/drivers/virt-pci.c | 8 +-
arch/um/drivers/virtio_uml.c | 4 +
arch/um/include/asm/delay.h | 4 +-
arch/um/include/asm/irqflags.h | 4 +-
arch/um/include/shared/longjmp.h | 2 +-
arch/um/include/shared/os.h | 4 +-
arch/um/include/shared/registers.h | 4 +-
arch/um/kernel/ksyms.c | 2 +-
arch/um/os-Linux/registers.c | 4 +-
arch/um/os-Linux/sigio.c | 6 +-
arch/um/os-Linux/signal.c | 8 +-
arch/um/os-Linux/start_up.c | 2 +-
arch/x86/boot/compressed/Makefile | 7 +-
arch/x86/configs/i386_defconfig | 1 +
arch/x86/configs/x86_64_defconfig | 1 +
arch/x86/crypto/aesni-intel_glue.c | 4 +-
arch/x86/include/asm/realmode.h | 1 +
arch/x86/include/asm/topology.h | 2 +-
arch/x86/include/asm/uaccess.h | 5 +-
arch/x86/kernel/cpu/mce/core.c | 42 +-
arch/x86/kernel/cpu/mce/inject.c | 2 +-
arch/x86/kernel/early-quirks.c | 10 +-
arch/x86/kernel/reboot.c | 12 +-
arch/x86/kvm/mmu/tdp_mmu.c | 6 +-
arch/x86/kvm/vmx/posted_intr.c | 16 +-
arch/x86/realmode/init.c | 26 +
arch/x86/um/syscalls_64.c | 3 +-
block/bfq-iosched.c | 44 +-
block/blk-flush.c | 4 +-
block/blk-pm.c | 22 +-
block/genhd.c | 15 +-
block/mq-deadline.c | 4 +-
crypto/jitterentropy.c | 3 +-
drivers/acpi/acpica/exfield.c | 7 +-
drivers/acpi/acpica/exoparg1.c | 3 +-
drivers/acpi/acpica/hwesleep.c | 4 +-
drivers/acpi/acpica/hwsleep.c | 4 +-
drivers/acpi/acpica/hwxfsleep.c | 2 -
drivers/acpi/acpica/utdelete.c | 1 +
drivers/acpi/battery.c | 22 +
drivers/acpi/bus.c | 4 +-
drivers/acpi/cppc_acpi.c | 2 +-
drivers/acpi/ec.c | 57 +-
drivers/acpi/internal.h | 2 +
drivers/acpi/scan.c | 13 +-
drivers/acpi/x86/utils.c | 116 ++-
drivers/android/binder.c | 98 ++-
drivers/base/core.c | 3 +-
drivers/base/power/runtime.c | 41 +-
drivers/base/property.c | 4 +-
drivers/base/regmap/regmap.c | 1 +
drivers/base/swnode.c | 2 +-
drivers/block/floppy.c | 6 +-
drivers/bluetooth/btintel.c | 26 +-
drivers/bluetooth/btmtksdio.c | 2 +
drivers/bluetooth/btusb.c | 5 +
drivers/bluetooth/hci_bcm.c | 7 +-
drivers/bluetooth/hci_qca.c | 9 +-
drivers/bluetooth/hci_vhci.c | 2 +
drivers/bluetooth/virtio_bt.c | 3 +
drivers/bus/mhi/core/init.c | 1 +
drivers/bus/mhi/core/pm.c | 35 +-
drivers/bus/mhi/pci_generic.c | 2 +-
drivers/char/mwave/3780i.h | 2 +-
drivers/char/random.c | 19 +-
drivers/char/tpm/tpm-chip.c | 18 +-
drivers/char/tpm/tpm_tis_core.c | 14 +-
drivers/clk/bcm/clk-bcm2835.c | 13 +-
drivers/clk/clk-bm1880.c | 20 +-
drivers/clk/clk-si5341.c | 2 +-
drivers/clk/clk-stm32f4.c | 4 -
drivers/clk/clk.c | 18 +
drivers/clk/imx/clk-imx8mn.c | 6 +-
drivers/clk/meson/gxbb.c | 44 +-
drivers/clk/qcom/gcc-sc7280.c | 2 +-
drivers/clk/renesas/rzg2l-cpg.c | 17 +-
drivers/cpufreq/cpufreq.c | 4 +-
drivers/cpufreq/qcom-cpufreq-hw.c | 7 +-
drivers/crypto/atmel-aes.c | 6 +-
drivers/crypto/caam/caamalg.c | 6 +
drivers/crypto/caam/caamalg_qi2.c | 2 +-
drivers/crypto/caam/caamhash.c | 3 +
drivers/crypto/caam/caampkc.c | 3 +
drivers/crypto/ccp/sev-dev.c | 30 +-
drivers/crypto/hisilicon/hpre/hpre_crypto.c | 2 +-
drivers/crypto/hisilicon/qm.c | 2 +-
drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c | 9 +-
.../crypto/marvell/octeontx2/otx2_cptpf_ucode.c | 3 +-
drivers/crypto/omap-aes.c | 2 +-
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 45 +-
drivers/crypto/qce/aead.c | 2 +-
drivers/crypto/qce/sha.c | 2 +-
drivers/crypto/qce/skcipher.c | 2 +-
drivers/crypto/stm32/stm32-crc32.c | 4 +-
drivers/crypto/stm32/stm32-cryp.c | 938 ++++++++-------------
drivers/crypto/stm32/stm32-hash.c | 6 +-
drivers/cxl/pmem.c | 17 +-
drivers/dma-buf/dma-fence-array.c | 6 +-
drivers/dma/at_xdmac.c | 57 +-
drivers/dma/idxd/device.c | 12 +-
drivers/dma/mmp_pdma.c | 6 -
drivers/dma/pxa_dma.c | 7 -
drivers/dma/stm32-mdma.c | 2 +-
drivers/dma/uniphier-xdmac.c | 5 +-
drivers/edac/synopsys_edac.c | 3 +-
drivers/firmware/efi/efi-init.c | 5 +
drivers/firmware/google/Kconfig | 6 +-
drivers/firmware/sysfb_simplefb.c | 8 +-
drivers/gpio/gpio-aspeed-sgpio.c | 32 +-
drivers/gpio/gpio-aspeed.c | 52 +-
drivers/gpio/gpio-idt3243x.c | 4 +-
drivers/gpio/gpio-mpc8xxx.c | 4 +-
drivers/gpio/gpiolib-acpi.c | 15 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 6 +
drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 1 -
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 4 +
drivers/gpu/drm/amd/amdgpu/cik.c | 4 +
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 4 +
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 +-
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 4 +
drivers/gpu/drm/amd/amdgpu/vi.c | 4 +
drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 138 ++-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +
.../drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 5 +-
drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c | 3 +-
drivers/gpu/drm/amd/display/dc/core/dc.c | 3 +-
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 +
.../gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 3 +-
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 6 +
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-
drivers/gpu/drm/bridge/display-connector.c | 2 +-
.../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 40 +-
.../gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c | 10 +-
drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h | 4 +-
.../gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 12 +-
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 1 +
drivers/gpu/drm/drm_dp_helper.c | 40 +-
drivers/gpu/drm/drm_drv.c | 9 +-
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 +
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 6 +
drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 1 +
drivers/gpu/drm/etnaviv/etnaviv_sched.c | 4 +-
drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c | 10 +-
drivers/gpu/drm/lima/lima_device.c | 1 +
drivers/gpu/drm/msm/Kconfig | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 +-
drivers/gpu/drm/msm/dsi/dsi.c | 10 +-
drivers/gpu/drm/msm/dsi/dsi.h | 1 -
drivers/gpu/drm/msm/dsi/dsi_manager.c | 17 -
drivers/gpu/drm/msm/msm_gem_submit.c | 2 +-
drivers/gpu/drm/nouveau/dispnv04/disp.c | 4 +-
drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c | 37 +-
.../gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 8 +-
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 10 +-
drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 8 +-
drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c | 8 +-
drivers/gpu/drm/panel/panel-novatek-nt36672a.c | 8 +-
.../gpu/drm/panel/panel-panasonic-vvx10f034n00.c | 8 +-
drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 8 +-
.../drm/panel/panel-samsung-s6e88a0-ams452ef01.c | 1 +
drivers/gpu/drm/panel/panel-samsung-sofef00.c | 1 +
drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c | 8 +-
drivers/gpu/drm/radeon/radeon_kms.c | 42 +-
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 20 +-
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 82 +-
drivers/gpu/drm/tegra/drm.c | 15 +
drivers/gpu/drm/tegra/gr2d.c | 33 +-
drivers/gpu/drm/tegra/submit.c | 4 +-
drivers/gpu/drm/tegra/vic.c | 7 +-
drivers/gpu/drm/ttm/ttm_bo.c | 2 +
drivers/gpu/drm/vboxvideo/vbox_main.c | 4 +-
drivers/gpu/drm/vc4/vc4_crtc.c | 31 +-
drivers/gpu/drm/vc4/vc4_drv.h | 29 +-
drivers/gpu/drm/vc4/vc4_hdmi.c | 136 ++-
drivers/gpu/drm/vc4/vc4_hvs.c | 26 +-
drivers/gpu/drm/vc4/vc4_kms.c | 3 +-
drivers/gpu/drm/vc4/vc4_txp.c | 4 +-
drivers/gpu/drm/vmwgfx/Makefile | 3 +-
drivers/gpu/drm/vmwgfx/ttm_memory.c | 99 +--
drivers/gpu/drm/vmwgfx/ttm_memory.h | 6 +-
drivers/gpu/drm/vmwgfx/vmwgfx_cmd.c | 7 +
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 48 +-
drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 20 +-
drivers/gpu/drm/vmwgfx/vmwgfx_mob.c | 12 +-
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 4 +-
drivers/gpu/drm/vmwgfx/vmwgfx_system_manager.c | 90 ++
drivers/gpu/drm/vmwgfx/vmwgfx_thp.c | 184 ----
drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c | 58 +-
drivers/gpu/host1x/Kconfig | 1 +
drivers/gpu/host1x/dev.c | 15 +
drivers/hid/hid-apple.c | 2 +-
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-input.c | 8 +
drivers/hid/hid-magicmouse.c | 95 ++-
drivers/hid/hid-uclogic-params.c | 31 +-
drivers/hid/hid-vivaldi.c | 34 +-
drivers/hid/i2c-hid/i2c-hid-acpi.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-core.c | 4 +-
drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-of.c | 10 +-
drivers/hid/i2c-hid/i2c-hid.h | 2 +-
drivers/hid/uhid.c | 29 +-
drivers/hid/wacom_wac.c | 39 +-
drivers/hsi/hsi_core.c | 1 +
drivers/hwmon/mr75203.c | 2 +-
drivers/i2c/busses/i2c-designware-pcidrv.c | 8 +-
drivers/i2c/busses/i2c-i801.c | 15 +-
drivers/i2c/busses/i2c-mpc.c | 23 +-
drivers/iio/adc/ti-adc081c.c | 22 +-
drivers/iio/industrialio-trigger.c | 36 +-
drivers/infiniband/core/cma.c | 18 +-
drivers/infiniband/core/device.c | 3 +-
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 6 +-
drivers/infiniband/hw/bnxt_re/qplib_rcfw.h | 1 -
drivers/infiniband/hw/cxgb4/qp.c | 1 +
drivers/infiniband/hw/hns/hns_roce_main.c | 5 +-
drivers/infiniband/hw/qedr/verbs.c | 2 +
drivers/infiniband/sw/rxe/rxe_opcode.c | 2 +-
drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +-
drivers/interconnect/qcom/icc-rpm.c | 1 +
drivers/iommu/amd/amd_iommu_types.h | 2 -
drivers/iommu/amd/init.c | 107 +--
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 2 +-
drivers/iommu/io-pgtable-arm-v7s.c | 6 +-
drivers/iommu/io-pgtable-arm.c | 9 +-
drivers/iommu/iommu.c | 3 +-
drivers/iommu/iova.c | 3 +-
drivers/irqchip/irq-gic-v3.c | 16 +
drivers/leds/leds-lp55xx-common.c | 4 +-
drivers/mailbox/mailbox-mpfs.c | 2 +-
drivers/mailbox/mtk-cmdq-mailbox.c | 2 +-
drivers/md/dm.c | 4 +-
drivers/md/md.c | 27 +-
drivers/md/md.h | 2 +
drivers/md/persistent-data/dm-btree.c | 8 +-
drivers/md/persistent-data/dm-space-map-common.c | 5 +
drivers/md/raid0.c | 38 +-
drivers/md/raid5.c | 41 +-
drivers/media/Kconfig | 8 +-
drivers/media/cec/core/cec-adap.c | 38 +-
drivers/media/cec/core/cec-api.c | 6 +
drivers/media/cec/core/cec-core.c | 3 +
drivers/media/cec/core/cec-pin.c | 31 +-
drivers/media/common/saa7146/saa7146_fops.c | 2 +-
.../media/common/videobuf2/videobuf2-dma-contig.c | 8 +-
drivers/media/dvb-core/dmxdev.c | 18 +-
drivers/media/dvb-frontends/dib8000.c | 4 +-
drivers/media/i2c/imx274.c | 5 +
drivers/media/i2c/ov8865.c | 16 +-
drivers/media/pci/b2c2/flexcop-pci.c | 3 +
drivers/media/pci/saa7146/hexium_gemini.c | 7 +-
drivers/media/pci/saa7146/hexium_orion.c | 8 +-
drivers/media/pci/saa7146/mxb.c | 8 +-
drivers/media/platform/aspeed-video.c | 14 +-
drivers/media/platform/coda/coda-common.c | 8 +-
drivers/media/platform/coda/coda-jpeg.c | 21 +-
drivers/media/platform/coda/imx-vdoa.c | 6 +-
drivers/media/platform/imx-pxp.c | 4 +-
.../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 2 +-
drivers/media/platform/qcom/venus/core.c | 11 +-
drivers/media/platform/qcom/venus/pm_helpers.c | 32 +-
drivers/media/platform/rcar-vin/rcar-csi2.c | 18 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 15 +-
.../media/platform/rockchip/rkisp1/rkisp1-dev.c | 2 +-
drivers/media/radio/si470x/radio-si470x-i2c.c | 3 +-
drivers/media/rc/igorplugusb.c | 4 +-
drivers/media/rc/mceusb.c | 8 +-
drivers/media/rc/redrat3.c | 22 +-
drivers/media/tuners/msi001.c | 7 +
drivers/media/tuners/si2157.c | 2 +-
drivers/media/usb/b2c2/flexcop-usb.c | 10 +-
drivers/media/usb/b2c2/flexcop-usb.h | 12 +-
drivers/media/usb/cpia2/cpia2_usb.c | 4 +-
drivers/media/usb/dvb-usb/dib0700_core.c | 2 -
drivers/media/usb/dvb-usb/dw2102.c | 338 +++++---
drivers/media/usb/dvb-usb/m920x.c | 12 +-
drivers/media/usb/em28xx/em28xx-cards.c | 18 +-
drivers/media/usb/em28xx/em28xx-core.c | 4 +-
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 8 +-
drivers/media/usb/s2255/s2255drv.c | 4 +-
drivers/media/usb/stk1160/stk1160-core.c | 4 +-
drivers/media/usb/uvc/uvcvideo.h | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 4 +-
drivers/memory/renesas-rpc-if.c | 2 +-
drivers/mfd/atmel-flexcom.c | 11 +-
drivers/mfd/tps65910.c | 22 +-
drivers/misc/eeprom/at25.c | 13 +-
drivers/misc/habanalabs/common/firmware_if.c | 17 +-
drivers/misc/habanalabs/common/habanalabs.h | 2 +
drivers/misc/lattice-ecp3-config.c | 12 +-
drivers/misc/lkdtm/Makefile | 2 +-
drivers/misc/mei/hbm.c | 20 +-
drivers/mmc/core/sdio.c | 4 +-
drivers/mmc/host/meson-mx-sdhc-mmc.c | 5 +
drivers/mmc/host/meson-mx-sdio.c | 5 +
drivers/mmc/host/mtk-sd.c | 64 +-
drivers/mmc/host/sdhci-pci-gli.c | 11 +
drivers/mmc/host/tmio_mmc_core.c | 15 +-
drivers/mtd/hyperbus/rpc-if.c | 8 +-
drivers/mtd/mtdcore.c | 4 +-
drivers/mtd/mtdpart.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 73 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 37 +-
drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c | 5 +
drivers/mtd/nand/raw/nand_base.c | 67 ++
drivers/net/bonding/bond_main.c | 40 +-
drivers/net/can/flexcan.c | 150 ++--
drivers/net/can/rcar/rcar_canfd.c | 5 +-
drivers/net/can/softing/softing_cs.c | 2 +-
drivers/net/can/softing/softing_fw.c | 11 +-
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 6 +-
drivers/net/can/xilinx_can.c | 7 +-
drivers/net/dsa/hirschmann/hellcreek.c | 87 +-
drivers/net/ethernet/broadcom/bnxt/Makefile | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 +
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 3 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c | 372 ++++++++
drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.h | 51 ++
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 355 +-------
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 43 -
drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h | 3 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 10 +-
drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c | 3 +-
drivers/net/ethernet/cortina/gemini.c | 9 +-
drivers/net/ethernet/freescale/fman/mac.c | 21 +-
drivers/net/ethernet/freescale/xgmac_mdio.c | 28 +-
drivers/net/ethernet/i825xx/sni_82596.c | 3 +-
drivers/net/ethernet/intel/igc/igc_main.c | 4 +-
drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 2 +
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 55 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 16 +-
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 36 +-
.../net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 5 +-
.../ethernet/mellanox/mlx5/core/en/tc_tun_encap.c | 2 +
.../net/ethernet/mellanox/mlx5/core/en/xsk/pool.c | 4 +-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 19 +-
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 3 +
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 7 +-
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 120 ++-
.../net/ethernet/mellanox/mlx5/core/esw/legacy.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 6 +-
drivers/net/ethernet/mellanox/mlx5/core/main.c | 8 +-
.../net/ethernet/mellanox/mlx5/core/sf/dev/dev.c | 5 +-
drivers/net/ethernet/mellanox/mlxsw/cmd.h | 12 +
drivers/net/ethernet/mellanox/mlxsw/pci.c | 7 +-
drivers/net/ethernet/mscc/ocelot.c | 31 +-
drivers/net/ethernet/mscc/ocelot_flower.c | 15 +-
drivers/net/ethernet/mscc/ocelot_net.c | 6 +-
drivers/net/ethernet/renesas/ravb_main.c | 6 +-
drivers/net/ethernet/rocker/rocker_ofdpa.c | 3 +-
.../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 7 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +
drivers/net/ethernet/ti/cpsw.c | 6 +-
drivers/net/ethernet/ti/cpsw_new.c | 6 +-
drivers/net/ethernet/ti/cpsw_priv.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 135 +--
drivers/net/ipa/ipa_endpoint.c | 7 +-
drivers/net/phy/marvell.c | 62 +-
drivers/net/phy/mdio_bus.c | 2 +-
drivers/net/phy/micrel.c | 36 +-
drivers/net/phy/phy-core.c | 2 +-
drivers/net/phy/sfp.c | 25 +-
drivers/net/ppp/ppp_generic.c | 7 +-
drivers/net/usb/mcs7830.c | 12 +-
drivers/net/usb/smsc95xx.c | 3 +-
drivers/net/wireless/ath/ar5523/ar5523.c | 4 +
drivers/net/wireless/ath/ath10k/core.c | 19 +-
drivers/net/wireless/ath/ath10k/htt_tx.c | 3 +
drivers/net/wireless/ath/ath10k/hw.h | 3 +
drivers/net/wireless/ath/ath10k/txrx.c | 2 -
drivers/net/wireless/ath/ath11k/ahb.c | 28 +-
drivers/net/wireless/ath/ath11k/core.c | 27 +-
drivers/net/wireless/ath/ath11k/core.h | 15 +-
drivers/net/wireless/ath/ath11k/dp.h | 3 +-
drivers/net/wireless/ath/ath11k/dp_tx.c | 2 +-
drivers/net/wireless/ath/ath11k/hal.c | 22 +
drivers/net/wireless/ath/ath11k/hal.h | 2 +
drivers/net/wireless/ath/ath11k/hw.c | 2 -
drivers/net/wireless/ath/ath11k/mac.c | 52 +-
drivers/net/wireless/ath/ath11k/pci.c | 22 +-
drivers/net/wireless/ath/ath11k/qmi.c | 2 +-
drivers/net/wireless/ath/ath11k/reg.c | 103 +--
drivers/net/wireless/ath/ath11k/wmi.c | 5 +-
drivers/net/wireless/ath/ath9k/hif_usb.c | 7 +
drivers/net/wireless/ath/ath9k/htc.h | 2 +
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 13 +
drivers/net/wireless/ath/ath9k/wmi.c | 4 +
drivers/net/wireless/ath/wcn36xx/dxe.c | 49 +-
drivers/net/wireless/ath/wcn36xx/main.c | 34 +-
drivers/net/wireless/ath/wcn36xx/smd.c | 10 +-
drivers/net/wireless/ath/wcn36xx/txrx.c | 41 +-
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
drivers/net/wireless/intel/iwlwifi/iwl-csr.h | 5 +-
drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 17 +-
drivers/net/wireless/intel/iwlwifi/iwl-io.c | 2 +-
.../net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 4 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 17 +
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 27 +
drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 23 +-
.../net/wireless/intel/iwlwifi/mvm/time-event.c | 36 +-
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 +-
drivers/net/wireless/intel/iwlwifi/queue/tx.c | 1 +
drivers/net/wireless/marvell/mwifiex/sta_event.c | 8 +-
drivers/net/wireless/marvell/mwifiex/usb.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7603/mac.c | 4 +
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 9 +-
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 8 +-
.../net/wireless/mediatek/mt76/mt7615/pci_init.c | 8 +-
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 9 +-
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 9 +-
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 6 -
drivers/net/wireless/microchip/wilc1000/netdev.c | 1 -
drivers/net/wireless/microchip/wilc1000/sdio.c | 2 +
drivers/net/wireless/microchip/wilc1000/spi.c | 2 +
drivers/net/wireless/realtek/rtw88/main.c | 2 +-
drivers/net/wireless/realtek/rtw88/pci.c | 61 +-
drivers/net/wireless/realtek/rtw88/pci.h | 2 +
drivers/net/wireless/realtek/rtw88/rtw8821c.h | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8822b.c | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_main.c | 4 +
drivers/net/wireless/rsi/rsi_91x_usb.c | 9 +-
drivers/net/wireless/rsi/rsi_usb.h | 2 +
drivers/net/wwan/mhi_wwan_mbim.c | 4 +-
drivers/nvmem/core.c | 2 +
drivers/of/base.c | 11 +-
drivers/of/fdt.c | 25 +-
drivers/of/unittest.c | 21 +-
drivers/parisc/pdc_stable.c | 4 +-
drivers/pci/controller/pci-aardvark.c | 4 +-
drivers/pci/controller/pci-mvebu.c | 8 +
drivers/pci/controller/pci-xgene.c | 2 +-
drivers/pci/hotplug/pciehp.h | 3 +
drivers/pci/hotplug/pciehp_core.c | 2 +-
drivers/pci/hotplug/pciehp_hpc.c | 28 +-
drivers/pci/msi.c | 26 +-
drivers/pci/pci-bridge-emul.c | 70 +-
drivers/pci/quirks.c | 3 +
drivers/pcmcia/cs.c | 8 +-
drivers/pcmcia/rsrc_nonstatic.c | 6 +
drivers/perf/arm-cmn.c | 5 +-
drivers/phy/cadence/phy-cadence-sierra.c | 31 +-
drivers/phy/mediatek/phy-mtk-mipi-dsi.c | 2 +
drivers/phy/mediatek/phy-mtk-tphy.c | 162 ++++
drivers/phy/socionext/phy-uniphier-usb3ss.c | 10 +-
drivers/pinctrl/pinctrl-rockchip.c | 2 +-
drivers/power/reset/mt6323-poweroff.c | 3 +
drivers/ptp/ptp_vclock.c | 10 +-
drivers/regulator/da9121-regulator.c | 5 +
drivers/regulator/qcom-labibb-regulator.c | 2 +-
drivers/regulator/qcom_smd-regulator.c | 100 ++-
drivers/remoteproc/imx_rproc.c | 1 +
drivers/rpmsg/rpmsg_core.c | 20 +-
drivers/rtc/rtc-cmos.c | 3 +
drivers/rtc/rtc-pxa.c | 4 +
drivers/scsi/lpfc/lpfc.h | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 62 +-
drivers/scsi/lpfc/lpfc_els.c | 11 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 8 +-
drivers/scsi/lpfc/lpfc_init.c | 8 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 6 +
drivers/scsi/lpfc/lpfc_sli.c | 6 -
drivers/scsi/mpi3mr/mpi3mr.h | 3 +-
drivers/scsi/mpi3mr/mpi3mr_fw.c | 4 +-
drivers/scsi/pm8001/pm8001_hwi.c | 4 +-
drivers/scsi/scsi.c | 4 +-
drivers/scsi/scsi_debugfs.c | 1 +
drivers/scsi/scsi_pm.c | 2 +-
drivers/scsi/sr.c | 2 +-
drivers/scsi/sr_vendor.c | 4 +-
drivers/scsi/ufs/tc-dwc-g210-pci.c | 1 -
drivers/scsi/ufs/ufs-mediatek.c | 2 +-
drivers/scsi/ufs/ufshcd-pci.c | 2 -
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 -
drivers/scsi/ufs/ufshcd.c | 22 +-
drivers/soc/imx/gpcv2.c | 2 +-
drivers/soc/mediatek/mtk-scpsys.c | 15 +-
drivers/soc/qcom/cpr.c | 2 +-
drivers/soc/ti/pruss.c | 2 +-
drivers/spi/spi-hisi-kunpeng.c | 15 +-
drivers/spi/spi-meson-spifc.c | 1 +
drivers/spi/spi-uniphier.c | 11 +-
drivers/spi/spi.c | 13 +-
drivers/staging/greybus/audio_topology.c | 15 +
drivers/staging/media/atomisp/i2c/ov2680.h | 24 -
drivers/staging/media/atomisp/pci/atomisp_cmd.c | 82 +-
drivers/staging/media/atomisp/pci/atomisp_fops.c | 11 +
.../media/atomisp/pci/atomisp_gmin_platform.c | 2 +-
drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 188 ++++-
drivers/staging/media/atomisp/pci/atomisp_subdev.c | 15 +-
drivers/staging/media/atomisp/pci/atomisp_subdev.h | 3 +
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 13 +-
drivers/staging/media/atomisp/pci/atomisp_v4l2.h | 3 +-
drivers/staging/media/atomisp/pci/sh_css.c | 27 +-
drivers/staging/media/atomisp/pci/sh_css_mipi.c | 41 +-
drivers/staging/media/atomisp/pci/sh_css_params.c | 8 +-
drivers/staging/media/hantro/hantro_drv.c | 3 +-
drivers/staging/media/hantro/hantro_h1_jpeg_enc.c | 2 +-
drivers/staging/media/hantro/hantro_hw.h | 3 +-
.../media/hantro/rockchip_vpu2_hw_jpeg_enc.c | 17 +
drivers/staging/media/hantro/rockchip_vpu_hw.c | 5 +-
drivers/staging/rtl8192e/rtllib.h | 2 +-
drivers/staging/rtl8192e/rtllib_module.c | 16 +-
drivers/staging/rtl8192e/rtllib_softmac.c | 6 +-
drivers/tee/tee_core.c | 4 +-
drivers/thermal/imx8mm_thermal.c | 3 +
drivers/thermal/imx_thermal.c | 145 ++--
drivers/thunderbolt/acpi.c | 13 +
drivers/tty/mxser.c | 5 +-
drivers/tty/serial/8250/8250_bcm7271.c | 11 +-
drivers/tty/serial/amba-pl010.c | 3 -
drivers/tty/serial/amba-pl011.c | 29 +-
drivers/tty/serial/atmel_serial.c | 14 +
drivers/tty/serial/imx.c | 7 +-
drivers/tty/serial/liteuart.c | 2 +-
drivers/tty/serial/serial_core.c | 7 +-
drivers/tty/serial/stm32-usart.c | 6 +-
drivers/tty/serial/uartlite.c | 2 +-
drivers/uio/uio_dmem_genirq.c | 6 +-
drivers/usb/core/hub.c | 5 +-
drivers/usb/dwc2/gadget.c | 13 +-
drivers/usb/dwc2/hcd.c | 7 +-
drivers/usb/dwc3/dwc3-meson-g12a.c | 17 +-
drivers/usb/dwc3/dwc3-qcom.c | 7 +-
drivers/usb/gadget/function/f_fs.c | 4 +-
drivers/usb/gadget/function/u_audio.c | 4 +-
drivers/usb/host/ehci-brcm.c | 6 +-
drivers/usb/host/uhci-platform.c | 3 +-
drivers/usb/misc/ftdi-elan.c | 1 +
drivers/vdpa/ifcvf/ifcvf_base.c | 41 +-
drivers/vdpa/ifcvf/ifcvf_base.h | 9 +-
drivers/vdpa/ifcvf/ifcvf_main.c | 24 +-
drivers/vdpa/mlx5/net/mlx5_vnet.c | 6 +-
drivers/video/backlight/qcom-wled.c | 122 +--
drivers/virtio/virtio_mem.c | 2 +-
drivers/virtio/virtio_ring.c | 4 +-
drivers/w1/slaves/w1_ds28e04.c | 26 +-
drivers/xen/gntdev.c | 6 +-
fs/btrfs/backref.c | 21 +-
fs/btrfs/ctree.c | 19 +-
fs/btrfs/inode.c | 11 +
fs/btrfs/qgroup.c | 19 +
fs/debugfs/file.c | 2 +-
fs/dlm/lock.c | 9 +
fs/dlm/lowcomms.c | 44 +-
fs/ext4/ext4.h | 1 +
fs/ext4/ext4_jbd2.c | 2 +
fs/ext4/extents.c | 2 -
fs/ext4/fast_commit.c | 18 +-
fs/ext4/inode.c | 51 +-
fs/ext4/ioctl.c | 2 -
fs/ext4/mballoc.c | 48 +-
fs/ext4/migrate.c | 23 +-
fs/ext4/super.c | 27 +-
fs/f2fs/checkpoint.c | 4 +-
fs/f2fs/compress.c | 50 +-
fs/f2fs/data.c | 7 +-
fs/f2fs/f2fs.h | 11 +
fs/f2fs/file.c | 10 +-
fs/f2fs/gc.c | 8 +-
fs/f2fs/inode.c | 5 +
fs/f2fs/segment.h | 3 +-
fs/f2fs/super.c | 44 +
fs/f2fs/sysfs.c | 4 +-
fs/fuse/file.c | 2 +-
fs/io_uring.c | 1 +
fs/jffs2/file.c | 40 +-
fs/ksmbd/connection.c | 1 +
fs/ksmbd/connection.h | 4 +-
fs/ksmbd/ksmbd_netlink.h | 12 +-
fs/ksmbd/smb2misc.c | 18 +-
fs/ksmbd/smb2ops.c | 16 +-
fs/ksmbd/smb2pdu.c | 87 +-
fs/ksmbd/smb2pdu.h | 1 +
fs/ksmbd/smb_common.h | 1 +
fs/ksmbd/transport_ipc.c | 2 +
fs/ksmbd/transport_tcp.c | 3 +-
fs/ubifs/super.c | 1 -
fs/udf/ialloc.c | 2 +
include/acpi/acpi_bus.h | 5 +-
include/acpi/actypes.h | 10 +-
include/asm-generic/bitops/find.h | 5 +
include/linux/blk-pm.h | 2 +-
include/linux/bpf_verifier.h | 7 +
include/linux/hid.h | 2 +
include/linux/iio/trigger.h | 2 +
include/linux/ipv6.h | 2 +
include/linux/mmzone.h | 9 +
include/linux/mtd/rawnand.h | 2 +
include/linux/of_fdt.h | 2 +
include/linux/pm_runtime.h | 3 +
include/linux/psi_types.h | 13 +-
include/linux/ptp_clock_kernel.h | 12 +-
include/linux/skbuff.h | 7 +-
include/linux/stmmac.h | 1 +
include/media/cec.h | 11 +-
include/net/inet_frag.h | 11 +-
include/net/ipv6_frag.h | 3 +-
include/net/pkt_sched.h | 5 +-
include/net/sch_generic.h | 5 +
include/net/seg6.h | 21 +
include/net/xfrm.h | 7 +-
include/sound/hda_codec.h | 8 +-
include/trace/events/cgroup.h | 12 +-
include/uapi/linux/xfrm.h | 1 +
kernel/audit.c | 18 +-
kernel/bpf/btf.c | 3 +-
kernel/bpf/inode.c | 14 +-
kernel/bpf/verifier.c | 28 +-
kernel/dma/pool.c | 4 +-
kernel/rcu/rcutorture.c | 5 +
kernel/rcu/tree_exp.h | 1 +
kernel/sched/cpuacct.c | 79 +-
kernel/sched/cputime.c | 4 +-
kernel/sched/fair.c | 4 +-
kernel/sched/psi.c | 45 +-
kernel/sched/rt.c | 23 +-
kernel/sched/stats.h | 5 +-
kernel/time/clocksource.c | 50 +-
kernel/trace/bpf_trace.c | 6 +-
kernel/trace/trace_kprobe.c | 5 +-
kernel/trace/trace_osnoise.c | 20 +-
kernel/trace/trace_syscalls.c | 6 +-
kernel/tsacct.c | 7 +-
lib/kunit/test.c | 18 +-
lib/logic_iomem.c | 19 +-
lib/mpi/mpi-mod.c | 2 +
lib/test_hmm.c | 24 +
lib/test_meminit.c | 1 +
mm/hmm.c | 5 +-
mm/page_alloc.c | 19 +-
mm/shmem.c | 37 +-
net/ax25/af_ax25.c | 10 +-
net/batman-adv/netlink.c | 30 +-
net/bluetooth/cmtp/core.c | 4 +-
net/bluetooth/hci_core.c | 1 +
net/bluetooth/hci_event.c | 14 +-
net/bluetooth/hci_request.c | 2 +-
net/bluetooth/hci_sysfs.c | 2 +
net/bluetooth/l2cap_sock.c | 45 +-
net/bluetooth/mgmt.c | 248 +++---
net/bridge/br_netfilter_hooks.c | 7 +-
net/core/dev.c | 6 +
net/core/devlink.c | 2 -
net/core/filter.c | 8 +-
net/core/flow_dissector.c | 3 +-
net/core/net-sysfs.c | 3 +
net/core/net_namespace.c | 4 +-
net/core/sock.c | 2 +
net/core/sock_map.c | 21 +-
net/dsa/switch.c | 4 +-
net/ipv4/fib_semantics.c | 47 +-
net/ipv4/inet_fragment.c | 8 +-
net/ipv4/ip_fragment.c | 3 +-
net/ipv4/ip_gre.c | 5 +-
net/ipv4/netfilter/ipt_CLUSTERIP.c | 5 +-
net/ipv4/tcp_bpf.c | 27 +
net/ipv6/icmp.c | 6 +-
net/ipv6/ip6_gre.c | 5 +-
net/ipv6/seg6.c | 59 ++
net/ipv6/seg6_local.c | 33 +-
net/ipv6/udp.c | 3 +-
net/mac80211/rx.c | 2 +-
net/mptcp/options.c | 10 +-
net/mptcp/pm_netlink.c | 18 +-
net/netfilter/nft_payload.c | 3 +
net/netfilter/nft_set_pipapo.c | 8 +
net/netrom/af_netrom.c | 12 +-
net/nfc/llcp_sock.c | 5 +
net/openvswitch/flow.c | 20 +-
net/sched/act_ct.c | 7 +
net/sched/cls_api.c | 3 +
net/sched/cls_flower.c | 3 +-
net/sched/sch_api.c | 2 +-
net/sched/sch_generic.c | 1 +
net/smc/af_smc.c | 8 +-
net/smc/smc_core.c | 29 +-
net/smc/smc_core.h | 2 +-
net/socket.c | 9 +-
net/unix/garbage.c | 14 +-
net/unix/scm.c | 6 +-
net/xfrm/xfrm_compat.c | 6 +-
net/xfrm/xfrm_interface.c | 14 +-
net/xfrm/xfrm_output.c | 30 +-
net/xfrm/xfrm_policy.c | 24 +-
net/xfrm/xfrm_state.c | 23 +-
net/xfrm/xfrm_user.c | 41 +-
samples/bpf/Makefile | 56 +-
samples/bpf/Makefile.target | 11 -
samples/bpf/hbm_kern.h | 2 -
samples/bpf/lwt_len_hist_kern.c | 7 -
samples/bpf/xdp_sample_user.h | 2 +
scripts/dtc/dtx_diff | 8 +-
scripts/sphinx-pre-install | 3 +
security/selinux/hooks.c | 12 +-
sound/core/jack.c | 3 +
sound/core/misc.c | 2 +-
sound/core/oss/pcm_oss.c | 2 +-
sound/core/pcm.c | 6 +-
sound/core/seq/seq_queue.c | 14 +-
sound/hda/hdac_stream.c | 14 +-
sound/pci/hda/hda_bind.c | 5 +
sound/pci/hda/hda_codec.c | 45 +-
sound/pci/hda/hda_controller.c | 1 -
sound/pci/hda/hda_local.h | 1 +
sound/pci/hda/patch_cs8409-tables.c | 3 +
sound/pci/hda/patch_cs8409.c | 9 +-
sound/pci/hda/patch_cs8409.h | 1 +
sound/soc/codecs/Kconfig | 3 +-
sound/soc/codecs/rt5663.c | 12 +-
sound/soc/fsl/fsl_asrc.c | 69 +-
sound/soc/fsl/fsl_mqs.c | 2 +-
sound/soc/fsl/imx-card.c | 32 +-
sound/soc/fsl/imx-hdmi.c | 2 +
sound/soc/intel/boards/sof_sdw.c | 2 +-
sound/soc/intel/catpt/dsp.c | 14 +-
sound/soc/intel/skylake/skl-pcm.c | 1 -
sound/soc/mediatek/mt8173/mt8173-max98090.c | 3 +
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 +
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 +
sound/soc/mediatek/mt8173/mt8173-rt5650.c | 2 +
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 6 +-
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 7 +-
.../mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c | 6 +-
sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 2 +-
sound/soc/mediatek/mt8195/mt8195-dai-pcm.c | 73 +-
sound/soc/mediatek/mt8195/mt8195-reg.h | 1 +
sound/soc/samsung/idma.c | 2 +
sound/soc/uniphier/Kconfig | 2 -
sound/usb/format.c | 2 +-
sound/usb/mixer_quirks.c | 2 +-
sound/usb/quirks.c | 2 +-
tools/bpf/bpftool/Documentation/Makefile | 1 -
tools/bpf/bpftool/Documentation/bpftool-btf.rst | 2 +-
tools/bpf/bpftool/Documentation/bpftool-cgroup.rst | 2 +-
tools/bpf/bpftool/Documentation/bpftool-gen.rst | 2 +-
tools/bpf/bpftool/Documentation/bpftool-link.rst | 2 +-
tools/bpf/bpftool/Documentation/bpftool-map.rst | 6 +-
tools/bpf/bpftool/Documentation/bpftool-prog.rst | 8 +-
tools/bpf/bpftool/Documentation/bpftool.rst | 6 +-
tools/bpf/bpftool/Makefile | 1 -
tools/bpf/bpftool/main.c | 2 +
tools/bpf/bpftool/prog.c | 15 +-
tools/include/nolibc/nolibc.h | 33 +-
tools/lib/bpf/btf.c | 55 +-
tools/lib/bpf/btf.h | 2 +-
tools/lib/bpf/btf_dump.c | 2 +-
tools/lib/bpf/gen_loader.c | 4 +-
tools/lib/bpf/libbpf.c | 9 +-
tools/lib/bpf/linker.c | 6 +-
tools/perf/Makefile.config | 5 +-
tools/perf/util/debug.c | 2 +-
tools/perf/util/evsel.c | 25 +-
tools/perf/util/probe-event.c | 3 +
tools/testing/selftests/bpf/btf_helpers.c | 9 +-
tools/testing/selftests/bpf/prog_tests/bpf_iter.c | 5 +-
.../selftests/bpf/prog_tests/migrate_reuseport.c | 4 +-
tools/testing/selftests/bpf/prog_tests/skb_ctx.c | 2 +
.../testing/selftests/bpf/prog_tests/tc_redirect.c | 7 +
tools/testing/selftests/clone3/clone3.c | 6 +
.../selftests/ftrace/test.d/kprobe/profile.tc | 2 +-
tools/testing/selftests/kselftest_harness.h | 2 +-
.../selftests/powerpc/security/spectre_v2.c | 2 +-
tools/testing/selftests/powerpc/signal/.gitignore | 1 +
tools/testing/selftests/powerpc/signal/Makefile | 1 +
.../selftests/powerpc/signal/sigreturn_kernel.c | 132 +++
tools/testing/selftests/vm/hmm-tests.c | 42 +
896 files changed, 9019 insertions(+), 5115 deletions(-)
From: Paul Cercueil <[email protected]>
commit 0171480007d64f663aae9226303f1b1e4621229e upstream.
The ECC engine on the JZ4740 SoC requires the ECC data to be read before
the page; using the default page reading function does not work. Indeed,
the old JZ4740 NAND driver (removed in 5.4) did use the 'OOB first' flag
that existed back then.
Use the newly created nand_read_page_hwecc_oob_first() to address this
issue.
This issue was not found when the new ingenic-nand driver was developed,
most likely because the Device Tree used had the nand-ecc-mode set to
"hw_oob_first", which seems to not be supported anymore.
Cc: <[email protected]> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -32,6 +32,7 @@ struct jz_soc_info {
unsigned long addr_offset;
unsigned long cmd_offset;
const struct mtd_ooblayout_ops *oob_layout;
+ bool oob_first;
};
struct ingenic_nand_cs {
@@ -240,6 +241,9 @@ static int ingenic_nand_attach_chip(stru
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
+ if (nfc->soc_info->oob_first)
+ chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
/* For legacy reasons we use a different layout on the qi,lb60 board. */
if (of_machine_is_compatible("qi,lb60"))
mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
@@ -534,6 +538,7 @@ static const struct jz_soc_info jz4740_s
.data_offset = 0x00000000,
.cmd_offset = 0x00008000,
.addr_offset = 0x00010000,
+ .oob_first = true,
};
static const struct jz_soc_info jz4725b_soc_info = {
From: Nick Kossifidis <[email protected]>
commit decf89f86ecd3c3c3de81c562010d5797bea3de1 upstream.
When allocating crash kernel region without explicitly specifying its
base address/size, memblock_phys_alloc_range will attempt to allocate
memory top to bottom (memblock.bottom_up is false), so the crash
kernel region will end up in highmem on 64bit systems. This way
swiotlb can't work on the crash kernel, since there won't be any
32bit addressible memory available for the bounce buffers.
Try to allocate 32bit addressible memory if available, for the
crash kernel by restricting the top search address to be less
than SZ_4G. If that fails fallback to the previous behavior.
I tested this on HiFive Unmatched where the pci-e controller needs
swiotlb to work, with this patch it's possible to access the pci-e
controller on crash kernel and mount the rootfs from the nvme.
Signed-off-by: Nick Kossifidis <[email protected]>
Fixes: e53d28180d4d ("RISC-V: Add kdump support")
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/mm/init.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -813,13 +813,22 @@ static void __init reserve_crashkernel(v
/*
* Current riscv boot protocol requires 2MB alignment for
* RV64 and 4MB alignment for RV32 (hugepage size)
+ *
+ * Try to alloc from 32bit addressible physical memory so that
+ * swiotlb can work on the crash kernel.
*/
crash_base = memblock_phys_alloc_range(crash_size, PMD_SIZE,
- search_start, search_end);
+ search_start,
+ min(search_end, (unsigned long) SZ_4G));
if (crash_base == 0) {
- pr_warn("crashkernel: couldn't allocate %lldKB\n",
- crash_size >> 10);
- return;
+ /* Try again without restricting region to 32bit addressible memory */
+ crash_base = memblock_phys_alloc_range(crash_size, PMD_SIZE,
+ search_start, search_end);
+ if (crash_base == 0) {
+ pr_warn("crashkernel: couldn't allocate %lldKB\n",
+ crash_size >> 10);
+ return;
+ }
}
pr_info("crashkernel: reserved 0x%016llx - 0x%016llx (%lld MB)\n",
From: Paul Cercueil <[email protected]>
commit d8466f73010faf71effb21228ae1cbf577dab130 upstream.
Move the function nand_read_page_hwecc_oob_first() (previously
nand_davinci_read_page_hwecc_oob_first()) to nand_base.c, and export it
as a GPL symbol, so that it can be used by more modules.
Cc: <[email protected]> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/davinci_nand.c | 69 ------------------------------------
drivers/mtd/nand/raw/nand_base.c | 67 ++++++++++++++++++++++++++++++++++
include/linux/mtd/rawnand.h | 2 +
3 files changed, 70 insertions(+), 68 deletions(-)
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -371,73 +371,6 @@ correct:
return corrected;
}
-/**
- * nand_davinci_read_page_hwecc_oob_first - Hardware ECC page read with ECC
- * data read from OOB area
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @oob_required: caller requires OOB data read to chip->oob_poi
- * @page: page number to read
- *
- * Hardware ECC for large page chips, which requires the ECC data to be
- * extracted from the OOB before the actual data is read.
- */
-static int nand_davinci_read_page_hwecc_oob_first(struct nand_chip *chip,
- uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- int i, eccsize = chip->ecc.size, ret;
- int eccbytes = chip->ecc.bytes;
- int eccsteps = chip->ecc.steps;
- uint8_t *p = buf;
- uint8_t *ecc_code = chip->ecc.code_buf;
- unsigned int max_bitflips = 0;
-
- /* Read the OOB area first */
- ret = nand_read_oob_op(chip, page, 0, chip->oob_poi, mtd->oobsize);
- if (ret)
- return ret;
-
- /* Move read cursor to start of page */
- ret = nand_change_read_column_op(chip, 0, NULL, 0, false);
- if (ret)
- return ret;
-
- ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
- chip->ecc.total);
- if (ret)
- return ret;
-
- for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- int stat;
-
- chip->ecc.hwctl(chip, NAND_ECC_READ);
-
- ret = nand_read_data_op(chip, p, eccsize, false, false);
- if (ret)
- return ret;
-
- stat = chip->ecc.correct(chip, p, &ecc_code[i], NULL);
- if (stat == -EBADMSG &&
- (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
- /* check for empty pages with bitflips */
- stat = nand_check_erased_ecc_chunk(p, eccsize,
- &ecc_code[i],
- eccbytes, NULL, 0,
- chip->ecc.strength);
- }
-
- if (stat < 0) {
- mtd->ecc_stats.failed++;
- } else {
- mtd->ecc_stats.corrected += stat;
- max_bitflips = max_t(unsigned int, max_bitflips, stat);
- }
- }
- return max_bitflips;
-}
-
/*----------------------------------------------------------------------*/
/* An ECC layout for using 4-bit ECC with small-page flash, storing
@@ -647,7 +580,7 @@ static int davinci_nand_attach_chip(stru
} else if (chunks == 4 || chunks == 8) {
mtd_set_ooblayout(mtd,
nand_get_large_page_ooblayout());
- chip->ecc.read_page = nand_davinci_read_page_hwecc_oob_first;
+ chip->ecc.read_page = nand_read_page_hwecc_oob_first;
} else {
return -EIO;
}
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -3161,6 +3161,73 @@ static int nand_read_page_hwecc(struct n
}
/**
+ * nand_read_page_hwecc_oob_first - Hardware ECC page read with ECC
+ * data read from OOB area
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * Hardware ECC for large page chips, which requires the ECC data to be
+ * extracted from the OOB before the actual data is read.
+ */
+int nand_read_page_hwecc_oob_first(struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ int i, eccsize = chip->ecc.size, ret;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_code = chip->ecc.code_buf;
+ unsigned int max_bitflips = 0;
+
+ /* Read the OOB area first */
+ ret = nand_read_oob_op(chip, page, 0, chip->oob_poi, mtd->oobsize);
+ if (ret)
+ return ret;
+
+ /* Move read cursor to start of page */
+ ret = nand_change_read_column_op(chip, 0, NULL, 0, false);
+ if (ret)
+ return ret;
+
+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ chip->ecc.hwctl(chip, NAND_ECC_READ);
+
+ ret = nand_read_data_op(chip, p, eccsize, false, false);
+ if (ret)
+ return ret;
+
+ stat = chip->ecc.correct(chip, p, &ecc_code[i], NULL);
+ if (stat == -EBADMSG &&
+ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
+ /* check for empty pages with bitflips */
+ stat = nand_check_erased_ecc_chunk(p, eccsize,
+ &ecc_code[i],
+ eccbytes, NULL, 0,
+ chip->ecc.strength);
+ }
+
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+ }
+ return max_bitflips;
+}
+EXPORT_SYMBOL_GPL(nand_read_page_hwecc_oob_first);
+
+/**
* nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
* @chip: nand chip info structure
* @buf: buffer to store read data
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1539,6 +1539,8 @@ int nand_read_data_op(struct nand_chip *
bool force_8bit, bool check_only);
int nand_write_data_op(struct nand_chip *chip, const void *buf,
unsigned int len, bool force_8bit);
+int nand_read_page_hwecc_oob_first(struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page);
/* Scan and identify a NAND device */
int nand_scan_with_ids(struct nand_chip *chip, unsigned int max_chips,
From: Jason Gerecke <[email protected]>
commit df03e9bd6d4806619b4cdc91a3d7695818a8e2b7 upstream.
AES hardware may internally re-classify a contact that it thought was
intentional as a palm. Intentional contacts are reported as "down" with
the confidence bit set. When this re-classification occurs, however, the
state transitions to "up" with the confidence bit cleared. This kind of
transition appears to be legal according to Microsoft docs, but we do
not handle it correctly. Because the confidence bit is clear, we don't
call `wacom_wac_finger_slot` and update userspace. This causes hung
touches that confuse userspace and interfere with pen arbitration.
This commit adds a special case to ignore the confidence flag if a contact
is reported as removed. This ensures we do not leave a hung touch if one
of these re-classification events occured. Ideally we'd have some way to
also let userspace know that the touch has been re-classified as a palm
and needs to be canceled, but that's not possible right now :)
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 7fb0413baa7f (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts)
CC: [email protected]
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 29 ++++++++++++++++++++++++++---
1 file changed, 26 insertions(+), 3 deletions(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2588,6 +2588,24 @@ static void wacom_wac_finger_slot(struct
}
}
+static bool wacom_wac_slot_is_active(struct input_dev *dev, int key)
+{
+ struct input_mt *mt = dev->mt;
+ struct input_mt_slot *s;
+
+ if (!mt)
+ return false;
+
+ for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
+ if (s->key == key &&
+ input_mt_get_value(s, ABS_MT_TRACKING_ID) >= 0) {
+ return true;
+ }
+ }
+
+ return false;
+}
+
static void wacom_wac_finger_event(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage, __s32 value)
{
@@ -2638,9 +2656,14 @@ static void wacom_wac_finger_event(struc
}
if (usage->usage_index + 1 == field->report_count) {
- if (equivalent_usage == wacom_wac->hid_data.last_slot_field &&
- wacom_wac->hid_data.confidence)
- wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
+ if (equivalent_usage == wacom_wac->hid_data.last_slot_field) {
+ bool touch_removed = wacom_wac_slot_is_active(wacom_wac->touch_input,
+ wacom_wac->hid_data.id) && !wacom_wac->hid_data.tipswitch;
+
+ if (wacom_wac->hid_data.confidence || touch_removed) {
+ wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
+ }
+ }
}
}
From: Nick Kossifidis <[email protected]>
commit 0e105f1d0037d677dff3c697d22f9551e6c39af8 upstream.
raw_smp_processor_id() doesn't return the hart id as stated in
arch/riscv/include/asm/smp.h, use smp_processor_id() instead
to get the cpu id, and cpuid_to_hartid_map() to pass the hart id
to the next kernel. This fixes kexec on HiFive Unleashed/Unmatched
where cpu ids and hart ids don't match (on qemu-virt they match).
Fixes: fba8a8674f68 ("RISC-V: Add kexec support")
Signed-off-by: Nick Kossifidis <[email protected]>
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/kernel/machine_kexec.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/riscv/kernel/machine_kexec.c
+++ b/arch/riscv/kernel/machine_kexec.c
@@ -169,7 +169,8 @@ machine_kexec(struct kimage *image)
struct kimage_arch *internal = &image->arch;
unsigned long jump_addr = (unsigned long) image->start;
unsigned long first_ind_entry = (unsigned long) &image->head;
- unsigned long this_hart_id = raw_smp_processor_id();
+ unsigned long this_cpu_id = smp_processor_id();
+ unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id);
unsigned long fdt_addr = internal->fdt_addr;
void *control_code_buffer = page_address(image->control_code_page);
riscv_kexec_method kexec_method = NULL;
From: Namjae Jeon <[email protected]>
commit 004443b3f6d722b455cf963ed7c3edd7f4772405 upstream.
Add smb2 max credits parameter to adjust maximum credits value to limit
number of outstanding requests.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ksmbd/connection.h | 1 -
fs/ksmbd/ksmbd_netlink.h | 1 +
fs/ksmbd/smb2misc.c | 2 +-
fs/ksmbd/smb2ops.c | 16 ++++++++++++----
fs/ksmbd/smb2pdu.c | 8 ++++----
fs/ksmbd/smb2pdu.h | 1 +
fs/ksmbd/smb_common.h | 1 +
fs/ksmbd/transport_ipc.c | 2 ++
8 files changed, 22 insertions(+), 10 deletions(-)
--- a/fs/ksmbd/connection.h
+++ b/fs/ksmbd/connection.h
@@ -62,7 +62,6 @@ struct ksmbd_conn {
/* References which are made for this Server object*/
atomic_t r_count;
unsigned short total_credits;
- unsigned short max_credits;
spinlock_t credits_lock;
wait_queue_head_t req_running_q;
/* Lock to protect requests list*/
--- a/fs/ksmbd/ksmbd_netlink.h
+++ b/fs/ksmbd/ksmbd_netlink.h
@@ -103,6 +103,7 @@ struct ksmbd_startup_request {
* we set the SPARSE_FILES bit (0x40).
*/
__u32 sub_auth[3]; /* Subauth value for Security ID */
+ __u32 smb2_max_credits; /* MAX credits */
__u32 ifc_list_sz; /* interfaces list size */
__s8 ____payload[];
};
--- a/fs/ksmbd/smb2misc.c
+++ b/fs/ksmbd/smb2misc.c
@@ -327,7 +327,7 @@ static int smb2_validate_credit_charge(s
ksmbd_debug(SMB, "Insufficient credit charge, given: %d, needed: %d\n",
credit_charge, calc_credit_num);
return 1;
- } else if (credit_charge > conn->max_credits) {
+ } else if (credit_charge > conn->vals->max_credits) {
ksmbd_debug(SMB, "Too large credit charge: %d\n", credit_charge);
return 1;
}
--- a/fs/ksmbd/smb2ops.c
+++ b/fs/ksmbd/smb2ops.c
@@ -20,6 +20,7 @@ static struct smb_version_values smb21_s
.max_read_size = SMB21_DEFAULT_IOSIZE,
.max_write_size = SMB21_DEFAULT_IOSIZE,
.max_trans_size = SMB21_DEFAULT_IOSIZE,
+ .max_credits = SMB2_MAX_CREDITS,
.large_lock_type = 0,
.exclusive_lock_type = SMB2_LOCKFLAG_EXCLUSIVE,
.shared_lock_type = SMB2_LOCKFLAG_SHARED,
@@ -45,6 +46,7 @@ static struct smb_version_values smb30_s
.max_read_size = SMB3_DEFAULT_IOSIZE,
.max_write_size = SMB3_DEFAULT_IOSIZE,
.max_trans_size = SMB3_DEFAULT_TRANS_SIZE,
+ .max_credits = SMB2_MAX_CREDITS,
.large_lock_type = 0,
.exclusive_lock_type = SMB2_LOCKFLAG_EXCLUSIVE,
.shared_lock_type = SMB2_LOCKFLAG_SHARED,
@@ -71,6 +73,7 @@ static struct smb_version_values smb302_
.max_read_size = SMB3_DEFAULT_IOSIZE,
.max_write_size = SMB3_DEFAULT_IOSIZE,
.max_trans_size = SMB3_DEFAULT_TRANS_SIZE,
+ .max_credits = SMB2_MAX_CREDITS,
.large_lock_type = 0,
.exclusive_lock_type = SMB2_LOCKFLAG_EXCLUSIVE,
.shared_lock_type = SMB2_LOCKFLAG_SHARED,
@@ -97,6 +100,7 @@ static struct smb_version_values smb311_
.max_read_size = SMB3_DEFAULT_IOSIZE,
.max_write_size = SMB3_DEFAULT_IOSIZE,
.max_trans_size = SMB3_DEFAULT_TRANS_SIZE,
+ .max_credits = SMB2_MAX_CREDITS,
.large_lock_type = 0,
.exclusive_lock_type = SMB2_LOCKFLAG_EXCLUSIVE,
.shared_lock_type = SMB2_LOCKFLAG_SHARED,
@@ -198,7 +202,6 @@ void init_smb2_1_server(struct ksmbd_con
conn->ops = &smb2_0_server_ops;
conn->cmds = smb2_0_server_cmds;
conn->max_cmds = ARRAY_SIZE(smb2_0_server_cmds);
- conn->max_credits = SMB2_MAX_CREDITS;
conn->signing_algorithm = SIGNING_ALG_HMAC_SHA256;
if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_LEASES)
@@ -216,7 +219,6 @@ void init_smb3_0_server(struct ksmbd_con
conn->ops = &smb3_0_server_ops;
conn->cmds = smb2_0_server_cmds;
conn->max_cmds = ARRAY_SIZE(smb2_0_server_cmds);
- conn->max_credits = SMB2_MAX_CREDITS;
conn->signing_algorithm = SIGNING_ALG_AES_CMAC;
if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_LEASES)
@@ -241,7 +243,6 @@ void init_smb3_02_server(struct ksmbd_co
conn->ops = &smb3_0_server_ops;
conn->cmds = smb2_0_server_cmds;
conn->max_cmds = ARRAY_SIZE(smb2_0_server_cmds);
- conn->max_credits = SMB2_MAX_CREDITS;
conn->signing_algorithm = SIGNING_ALG_AES_CMAC;
if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_LEASES)
@@ -266,7 +267,6 @@ int init_smb3_11_server(struct ksmbd_con
conn->ops = &smb3_11_server_ops;
conn->cmds = smb2_0_server_cmds;
conn->max_cmds = ARRAY_SIZE(smb2_0_server_cmds);
- conn->max_credits = SMB2_MAX_CREDITS;
conn->signing_algorithm = SIGNING_ALG_AES_CMAC;
if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_LEASES)
@@ -305,3 +305,11 @@ void init_smb2_max_trans_size(unsigned i
smb302_server_values.max_trans_size = sz;
smb311_server_values.max_trans_size = sz;
}
+
+void init_smb2_max_credits(unsigned int sz)
+{
+ smb21_server_values.max_credits = sz;
+ smb30_server_values.max_credits = sz;
+ smb302_server_values.max_credits = sz;
+ smb311_server_values.max_credits = sz;
+}
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -310,7 +310,7 @@ int smb2_set_rsp_credits(struct ksmbd_wo
hdr->CreditCharge = req_hdr->CreditCharge;
- if (conn->total_credits > conn->max_credits) {
+ if (conn->total_credits > conn->vals->max_credits) {
hdr->CreditRequest = 0;
pr_err("Total credits overflow: %d\n", conn->total_credits);
return -EINVAL;
@@ -331,12 +331,12 @@ int smb2_set_rsp_credits(struct ksmbd_wo
if (hdr->Command == SMB2_NEGOTIATE)
aux_max = 0;
else
- aux_max = conn->max_credits - credit_charge;
+ aux_max = conn->vals->max_credits - credit_charge;
aux_credits = min_t(unsigned short, aux_credits, aux_max);
credits_granted = credit_charge + aux_credits;
- if (conn->max_credits - conn->total_credits < credits_granted)
- credits_granted = conn->max_credits -
+ if (conn->vals->max_credits - conn->total_credits < credits_granted)
+ credits_granted = conn->vals->max_credits -
conn->total_credits;
conn->total_credits += credits_granted;
--- a/fs/ksmbd/smb2pdu.h
+++ b/fs/ksmbd/smb2pdu.h
@@ -1647,6 +1647,7 @@ int init_smb3_11_server(struct ksmbd_con
void init_smb2_max_read_size(unsigned int sz);
void init_smb2_max_write_size(unsigned int sz);
void init_smb2_max_trans_size(unsigned int sz);
+void init_smb2_max_credits(unsigned int sz);
bool is_smb2_neg_cmd(struct ksmbd_work *work);
bool is_smb2_rsp(struct ksmbd_work *work);
--- a/fs/ksmbd/smb_common.h
+++ b/fs/ksmbd/smb_common.h
@@ -412,6 +412,7 @@ struct smb_version_values {
__u32 max_read_size;
__u32 max_write_size;
__u32 max_trans_size;
+ __u32 max_credits;
__u32 large_lock_type;
__u32 exclusive_lock_type;
__u32 shared_lock_type;
--- a/fs/ksmbd/transport_ipc.c
+++ b/fs/ksmbd/transport_ipc.c
@@ -301,6 +301,8 @@ static int ipc_server_config_on_startup(
init_smb2_max_write_size(req->smb2_max_write);
if (req->smb2_max_trans)
init_smb2_max_trans_size(req->smb2_max_trans);
+ if (req->smb2_max_credits)
+ init_smb2_max_credits(req->smb2_max_credits);
ret = ksmbd_set_netbios_name(req->netbios_name);
ret |= ksmbd_set_server_string(req->server_string);
From: Jason Gerecke <[email protected]>
commit 546e41ac994cc185ef3de610ca849a294b5df3ba upstream.
These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit f8b6a74719b5 ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.
Later commits such as 7fb0413baa7f (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
CC: [email protected]
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2692,11 +2692,14 @@ static void wacom_wac_finger_pre_report(
hid_data->cc_index >= 0) {
struct hid_field *field = report->field[hid_data->cc_index];
int value = field->value[hid_data->cc_value_index];
- if (value)
+ if (value) {
hid_data->num_expected = value;
+ hid_data->num_received = 0;
+ }
}
else {
hid_data->num_expected = wacom_wac->features.touch_max;
+ hid_data->num_received = 0;
}
}
@@ -2724,6 +2727,7 @@ static void wacom_wac_finger_report(stru
input_sync(input);
wacom_wac->hid_data.num_received = 0;
+ wacom_wac->hid_data.num_expected = 0;
/* keep touch state for pen event */
wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac);
From: Andreas Oetken <[email protected]>
commit 2966daf7d253d9904b337b040dd7a43472858b8a upstream.
Not the child partition should be removed from the partition list
but the partition itself. Otherwise the partition list gets broken
and any subsequent remove operations leads to a kernel panic.
Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Andreas Oetken <[email protected]>
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/mtdpart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -312,7 +312,7 @@ static int __mtd_del_partition(struct mt
if (err)
return err;
- list_del(&child->part.node);
+ list_del(&mtd->part.node);
free_partition(mtd);
return 0;
From: Namjae Jeon <[email protected]>
commit ac090d9c90b087d6fb714e54b2a6dd1e6c373ed6 upstream.
MS-SMB2 describe session sign like the following.
Session.SigningRequired MUST be set to TRUE under the following conditions:
- If the SMB2_NEGOTIATE_SIGNING_REQUIRED bit is set in the SecurityMode
field of the client request.
- If the SMB2_SESSION_FLAG_IS_GUEST bit is not set in the SessionFlags
field and Session.IsAnonymous is FALSE and either Connection.ShouldSign
or global RequireMessageSigning is TRUE.
When trying guest account connection using nautilus, The login failure
happened on session setup. ksmbd does not allow this connection
when the user is a guest and the connection sign is set. Just do not set
session sign instead of error response as described in the specification.
And this change improves the guest connection in Nautilus.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: [email protected] # v5.15+
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ksmbd/smb2pdu.c | 64 ++++++++++++++++++++++++-----------------------------
1 file changed, 30 insertions(+), 34 deletions(-)
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -1457,11 +1457,6 @@ static int ntlm_authenticate(struct ksmb
sess->user = user;
if (user_guest(sess->user)) {
- if (conn->sign) {
- ksmbd_debug(SMB, "Guest login not allowed when signing enabled\n");
- return -EPERM;
- }
-
rsp->SessionFlags = SMB2_SESSION_FLAG_IS_GUEST_LE;
} else {
struct authenticate_message *authblob;
@@ -1474,38 +1469,39 @@ static int ntlm_authenticate(struct ksmb
ksmbd_debug(SMB, "authentication failed\n");
return -EPERM;
}
+ }
- /*
- * If session state is SMB2_SESSION_VALID, We can assume
- * that it is reauthentication. And the user/password
- * has been verified, so return it here.
- */
- if (sess->state == SMB2_SESSION_VALID) {
- if (conn->binding)
- goto binding_session;
- return 0;
- }
+ /*
+ * If session state is SMB2_SESSION_VALID, We can assume
+ * that it is reauthentication. And the user/password
+ * has been verified, so return it here.
+ */
+ if (sess->state == SMB2_SESSION_VALID) {
+ if (conn->binding)
+ goto binding_session;
+ return 0;
+ }
- if ((conn->sign || server_conf.enforced_signing) ||
- (req->SecurityMode & SMB2_NEGOTIATE_SIGNING_REQUIRED))
- sess->sign = true;
-
- if (smb3_encryption_negotiated(conn) &&
- !(req->Flags & SMB2_SESSION_REQ_FLAG_BINDING)) {
- rc = conn->ops->generate_encryptionkey(sess);
- if (rc) {
- ksmbd_debug(SMB,
- "SMB3 encryption key generation failed\n");
- return -EINVAL;
- }
- sess->enc = true;
- rsp->SessionFlags = SMB2_SESSION_FLAG_ENCRYPT_DATA_LE;
- /*
- * signing is disable if encryption is enable
- * on this session
- */
- sess->sign = false;
+ if ((rsp->SessionFlags != SMB2_SESSION_FLAG_IS_GUEST_LE &&
+ (conn->sign || server_conf.enforced_signing)) ||
+ (req->SecurityMode & SMB2_NEGOTIATE_SIGNING_REQUIRED))
+ sess->sign = true;
+
+ if (smb3_encryption_negotiated(conn) &&
+ !(req->Flags & SMB2_SESSION_REQ_FLAG_BINDING)) {
+ rc = conn->ops->generate_encryptionkey(sess);
+ if (rc) {
+ ksmbd_debug(SMB,
+ "SMB3 encryption key generation failed\n");
+ return -EINVAL;
}
+ sess->enc = true;
+ rsp->SessionFlags = SMB2_SESSION_FLAG_ENCRYPT_DATA_LE;
+ /*
+ * signing is disable if encryption is enable
+ * on this session
+ */
+ sess->sign = false;
}
binding_session:
From: Ammar Faizi <[email protected]>
commit 937ed91c712273131de6d2a02caafd3ee84e0c72 upstream.
Before this patch, the `_start` function looks like this:
```
0000000000001170 <_start>:
1170: pop %rdi
1171: mov %rsp,%rsi
1174: lea 0x8(%rsi,%rdi,8),%rdx
1179: and $0xfffffffffffffff0,%rsp
117d: sub $0x8,%rsp
1181: call 1000 <main>
1186: movzbq %al,%rdi
118a: mov $0x3c,%rax
1191: syscall
1193: hlt
1194: data16 cs nopw 0x0(%rax,%rax,1)
119f: nop
```
Note the "and" to %rsp with $-16, it makes the %rsp be 16-byte aligned,
but then there is a "sub" with $0x8 which makes the %rsp no longer
16-byte aligned, then it calls main. That's the bug!
What actually the x86-64 System V ABI mandates is that right before the
"call", the %rsp must be 16-byte aligned, not after the "call". So the
"sub" with $0x8 here breaks the alignment. Remove it.
An example where this rule matters is when the callee needs to align
its stack at 16-byte for aligned move instruction, like `movdqa` and
`movaps`. If the callee can't align its stack properly, it will result
in segmentation fault.
x86-64 System V ABI also mandates the deepest stack frame should be
zero. Just to be safe, let's zero the %rbp on startup as the content
of %rbp may be unspecified when the program starts. Now it looks like
this:
```
0000000000001170 <_start>:
1170: pop %rdi
1171: mov %rsp,%rsi
1174: lea 0x8(%rsi,%rdi,8),%rdx
1179: xor %ebp,%ebp # zero the %rbp
117b: and $0xfffffffffffffff0,%rsp # align the %rsp
117f: call 1000 <main>
1184: movzbq %al,%rdi
1188: mov $0x3c,%rax
118f: syscall
1191: hlt
1192: data16 cs nopw 0x0(%rax,%rax,1)
119d: nopl (%rax)
```
Cc: Bedirhan KURT <[email protected]>
Cc: Louvian Lyndal <[email protected]>
Reported-by: Peter Cordes <[email protected]>
Signed-off-by: Ammar Faizi <[email protected]>
[wt: I did this on purpose due to a misunderstanding of the spec, other
archs will thus have to be rechecked, particularly i386]
Cc: [email protected]
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/include/nolibc/nolibc.h | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/tools/include/nolibc/nolibc.h
+++ b/tools/include/nolibc/nolibc.h
@@ -399,14 +399,20 @@ struct stat {
})
/* startup code */
+/*
+ * x86-64 System V ABI mandates:
+ * 1) %rsp must be 16-byte aligned right before the function call.
+ * 2) The deepest stack frame should be zero (the %rbp).
+ *
+ */
asm(".section .text\n"
".global _start\n"
"_start:\n"
"pop %rdi\n" // argc (first arg, %rdi)
"mov %rsp, %rsi\n" // argv[] (second arg, %rsi)
"lea 8(%rsi,%rdi,8),%rdx\n" // then a NULL then envp (third arg, %rdx)
- "and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned when
- "sub $8, %rsp\n" // entering the callee
+ "xor %ebp, %ebp\n" // zero the stack frame
+ "and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned before call
"call main\n" // main() returns the status code, we'll exit with it.
"movzb %al, %rdi\n" // retrieve exit code from 8 lower bits
"mov $60, %rax\n" // NR_exit == 60
From: Krzysztof Kozlowski <[email protected]>
commit dded08927ca3c31a5c37f8e7f95fe98770475dd4 upstream.
Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer
(which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after
a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM.
KASAN report:
BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0
Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899
CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
? nfc_alloc_send_skb+0x2d/0xc0
__kasan_report.cold+0x117/0x11c
? mark_lock+0x480/0x4f0
? nfc_alloc_send_skb+0x2d/0xc0
kasan_report+0x38/0x50
nfc_alloc_send_skb+0x2d/0xc0
nfc_llcp_send_ui_frame+0x18c/0x2a0
? nfc_llcp_send_i_frame+0x230/0x230
? __local_bh_enable_ip+0x86/0xe0
? llcp_sock_connect+0x470/0x470
? llcp_sock_connect+0x470/0x470
sock_sendmsg+0x8e/0xa0
____sys_sendmsg+0x253/0x3f0
...
The issue was visible only with multiple simultaneous calls to bind() and
sendmsg(), which resulted in most of the bind() calls to fail. The
bind() was failing on checking if there is available WKS/SDP/SAP
(respective bit in 'struct nfc_llcp_local' fields). When there was no
available WKS/SDP/SAP, the bind returned error but the sendmsg() to such
socket was able to trigger mentioned NULL pointer dereference of
nfc_llcp_sock->dev.
The code looks simply racy and currently it protects several paths
against race with checks for (!nfc_llcp_sock->local) which is NULL-ified
in error paths of bind(). The llcp_sock_sendmsg() did not have such
check but called function nfc_llcp_send_ui_frame() had, although not
protected with lock_sock().
Therefore the race could look like (same socket is used all the time):
CPU0 CPU1
==== ====
llcp_sock_bind()
- lock_sock()
- success
- release_sock()
- return 0
llcp_sock_sendmsg()
- lock_sock()
- release_sock()
llcp_sock_bind(), same socket
- lock_sock()
- error
- nfc_llcp_send_ui_frame()
- if (!llcp_sock->local)
- llcp_sock->local = NULL
- nfc_put_device(dev)
- dereference llcp_sock->dev
- release_sock()
- return -ERRNO
The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the
lock, which is racy and ineffective check. Instead, its caller
llcp_sock_sendmsg(), should perform the check inside lock_sock().
Reported-and-tested-by: [email protected]
Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/llcp_sock.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -789,6 +789,11 @@ static int llcp_sock_sendmsg(struct sock
lock_sock(sk);
+ if (!llcp_sock->local) {
+ release_sock(sk);
+ return -ENODEV;
+ }
+
if (sk->sk_type == SOCK_DGRAM) {
DECLARE_SOCKADDR(struct sockaddr_nfc_llcp *, addr,
msg->msg_name);
From: Johan Hovold <[email protected]>
commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: [email protected] # 3.0
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/redrat3.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -404,7 +404,7 @@ static int redrat3_send_cmd(int cmd, str
udev = rr3->udev;
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0000, 0x0000, data, sizeof(u8), HZ * 10);
+ 0x0000, 0x0000, data, sizeof(u8), 10000);
if (res < 0) {
dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d",
@@ -480,7 +480,7 @@ static u32 redrat3_get_timeout(struct re
pipe = usb_rcvctrlpipe(rr3->udev, 0);
ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5);
+ RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000);
if (ret != len)
dev_warn(rr3->dev, "Failed to read timeout from hardware\n");
else {
@@ -510,7 +510,7 @@ static int redrat3_set_timeout(struct rc
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout),
- HZ * 25);
+ 25000);
dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n",
be32_to_cpu(*timeout), ret);
@@ -542,32 +542,32 @@ static void redrat3_reset(struct redrat3
*val = 0x01;
rc = usb_control_msg(udev, rxpipe, RR3_RESET,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25);
+ RR3_CPUCS_REG_ADDR, 0, val, len, 25000);
dev_dbg(dev, "reset returned 0x%02x\n", rc);
*val = length_fuzz;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25);
+ RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000);
dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);
*val = (65536 - (minimum_pause * 2000)) / 256;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25);
+ RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000);
dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc);
*val = periods_measure_carrier;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25);
+ RR3_IR_IO_PERIODS_MF, 0, val, len, 25000);
dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val,
rc);
*val = RR3_DRIVER_MAXLENS;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25);
+ RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000);
dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);
kfree(val);
@@ -585,7 +585,7 @@ static void redrat3_get_firmware_rev(str
rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0),
RR3_FW_VERSION,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5);
+ 0, 0, buffer, RR3_FW_VERSION_LEN, 5000);
if (rc >= 0)
dev_info(rr3->dev, "Firmware rev: %s", buffer);
@@ -825,14 +825,14 @@ static int redrat3_transmit_ir(struct rc
pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress);
ret = usb_bulk_msg(rr3->udev, pipe, irdata,
- sendbuf_len, &ret_len, 10 * HZ);
+ sendbuf_len, &ret_len, 10000);
dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);
/* now tell the hardware to transmit what we sent it */
pipe = usb_rcvctrlpipe(rr3->udev, 0);
ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0, 0, irdata, 2, HZ * 10);
+ 0, 0, irdata, 2, 10000);
if (ret < 0)
dev_err(dev, "Error: control msg send failed, rc %d\n", ret);
From: Jonathan Cameron <[email protected]>
commit c9791a94384af07592d29504004d2255dbaf8663 upstream.
Unfortuanately a non standards compliant ACPI ID is known to be
in the wild on some AAEON boards.
Partly revert the removal of these IDs so that ADC081C will again
work + add a comment to that affect for future reference.
Whilst here use generic firmware properties rather than the ACPI
specific handling previously found in this driver.
Reported-by: Kunyang Fan <[email protected]>
Fixes: c458b7ca3fd0 ("iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.")
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Tested-by: Kunyang Fan <[email protected]> #UP-extremei11
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ti-adc081c.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -19,6 +19,7 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
@@ -156,13 +157,16 @@ static int adc081c_probe(struct i2c_clie
{
struct iio_dev *iio;
struct adc081c *adc;
- struct adcxx1c_model *model;
+ const struct adcxx1c_model *model;
int err;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -EOPNOTSUPP;
- model = &adcxx1c_models[id->driver_data];
+ if (dev_fwnode(&client->dev))
+ model = device_get_match_data(&client->dev);
+ else
+ model = &adcxx1c_models[id->driver_data];
iio = devm_iio_device_alloc(&client->dev, sizeof(*adc));
if (!iio)
@@ -210,10 +214,17 @@ static const struct i2c_device_id adc081
};
MODULE_DEVICE_TABLE(i2c, adc081c_id);
+static const struct acpi_device_id adc081c_acpi_match[] = {
+ /* Used on some AAEON boards */
+ { "ADC081C", (kernel_ulong_t)&adcxx1c_models[ADC081C] },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, adc081c_acpi_match);
+
static const struct of_device_id adc081c_of_match[] = {
- { .compatible = "ti,adc081c" },
- { .compatible = "ti,adc101c" },
- { .compatible = "ti,adc121c" },
+ { .compatible = "ti,adc081c", .data = &adcxx1c_models[ADC081C] },
+ { .compatible = "ti,adc101c", .data = &adcxx1c_models[ADC101C] },
+ { .compatible = "ti,adc121c", .data = &adcxx1c_models[ADC121C] },
{ }
};
MODULE_DEVICE_TABLE(of, adc081c_of_match);
@@ -222,6 +233,7 @@ static struct i2c_driver adc081c_driver
.driver = {
.name = "adc081c",
.of_match_table = adc081c_of_match,
+ .acpi_match_table = adc081c_acpi_match,
},
.probe = adc081c_probe,
.id_table = adc081c_id,
From: Jonathan Cameron <[email protected]>
commit 9020ef659885f2622cfb386cc229b6d618362895 upstream.
IIO triggers are software IRQ chips that split an incoming IRQ into
separate IRQs routed to all devices using the trigger.
When all consumers are done then a trigger callback reenable() is
called. There are a few circumstances under which this can happen
in atomic context.
1) A single user of the trigger that calls the iio_trigger_done()
function from interrupt context.
2) A race between disconnecting the last device from a trigger and
the trigger itself sucessfully being disabled.
To avoid a resulting scheduling whilst atomic, close this second corner
by using schedule_work() to ensure the reenable is not done in atomic
context.
Note that drivers must be careful to manage the interaction of
set_state() and reenable() callbacks to ensure appropriate reference
counting if they are relying on the same hardware controls.
Deliberately taking this the slow path rather than via a fixes tree
because the error has hard to hit and I would like it to soak for a while
before hitting a release kernel.
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Tested-by: Oleksij Rempel <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/industrialio-trigger.c | 36 +++++++++++++++++++++++++++++++++++-
include/linux/iio/trigger.h | 2 ++
2 files changed, 37 insertions(+), 1 deletion(-)
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -162,6 +162,39 @@ static struct iio_trigger *iio_trigger_a
return trig;
}
+static void iio_reenable_work_fn(struct work_struct *work)
+{
+ struct iio_trigger *trig = container_of(work, struct iio_trigger,
+ reenable_work);
+
+ /*
+ * This 'might' occur after the trigger state is set to disabled -
+ * in that case the driver should skip reenabling.
+ */
+ trig->ops->reenable(trig);
+}
+
+/*
+ * In general, reenable callbacks may need to sleep and this path is
+ * not performance sensitive, so just queue up a work item
+ * to reneable the trigger for us.
+ *
+ * Races that can cause this.
+ * 1) A handler occurs entirely in interrupt context so the counter
+ * the final decrement is still in this interrupt.
+ * 2) The trigger has been removed, but one last interrupt gets through.
+ *
+ * For (1) we must call reenable, but not in atomic context.
+ * For (2) it should be safe to call reenanble, if drivers never blindly
+ * reenable after state is off.
+ */
+static void iio_trigger_notify_done_atomic(struct iio_trigger *trig)
+{
+ if (atomic_dec_and_test(&trig->use_count) && trig->ops &&
+ trig->ops->reenable)
+ schedule_work(&trig->reenable_work);
+}
+
void iio_trigger_poll(struct iio_trigger *trig)
{
int i;
@@ -173,7 +206,7 @@ void iio_trigger_poll(struct iio_trigger
if (trig->subirqs[i].enabled)
generic_handle_irq(trig->subirq_base + i);
else
- iio_trigger_notify_done(trig);
+ iio_trigger_notify_done_atomic(trig);
}
}
}
@@ -535,6 +568,7 @@ struct iio_trigger *viio_trigger_alloc(s
trig->dev.type = &iio_trig_type;
trig->dev.bus = &iio_bus_type;
device_initialize(&trig->dev);
+ INIT_WORK(&trig->reenable_work, iio_reenable_work_fn);
mutex_init(&trig->pool_lock);
trig->subirq_base = irq_alloc_descs(-1, 0,
--- a/include/linux/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -55,6 +55,7 @@ struct iio_trigger_ops {
* @attached_own_device:[INTERN] if we are using our own device as trigger,
* i.e. if we registered a poll function to the same
* device as the one providing the trigger.
+ * @reenable_work: [INTERN] work item used to ensure reenable can sleep.
**/
struct iio_trigger {
const struct iio_trigger_ops *ops;
@@ -74,6 +75,7 @@ struct iio_trigger {
unsigned long pool[BITS_TO_LONGS(CONFIG_IIO_CONSUMERS_PER_TRIGGER)];
struct mutex pool_lock;
bool attached_own_device;
+ struct work_struct reenable_work;
};
From: Dan Williams <[email protected]>
commit 08b9e0ab8af48895337192e683de44ab1e1b7427 upstream.
There is a potential race between queue_work() returning and the
queued-work running that could result in put_device() running before
get_device(). Introduce the cxl_nvdimm_bridge_state_work() helper that
takes the reference unconditionally, but drops it if no new work was
queued, to keep the references balanced.
Fixes: 8fdcb1704f61 ("cxl/pmem: Add initial infrastructure for pmem support")
Cc: <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Ben Widawsky <[email protected]>
Link: https://lore.kernel.org/r/163553734757.2509761.3305231863616785470.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cxl/pmem.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
--- a/drivers/cxl/pmem.c
+++ b/drivers/cxl/pmem.c
@@ -149,14 +149,24 @@ static void cxl_nvb_update_state(struct
put_device(&cxl_nvb->dev);
}
+static void cxl_nvdimm_bridge_state_work(struct cxl_nvdimm_bridge *cxl_nvb)
+{
+ /*
+ * Take a reference that the workqueue will drop if new work
+ * gets queued.
+ */
+ get_device(&cxl_nvb->dev);
+ if (!queue_work(cxl_pmem_wq, &cxl_nvb->state_work))
+ put_device(&cxl_nvb->dev);
+}
+
static void cxl_nvdimm_bridge_remove(struct device *dev)
{
struct cxl_nvdimm_bridge *cxl_nvb = to_cxl_nvdimm_bridge(dev);
if (cxl_nvb->state == CXL_NVB_ONLINE)
cxl_nvb->state = CXL_NVB_OFFLINE;
- if (queue_work(cxl_pmem_wq, &cxl_nvb->state_work))
- get_device(&cxl_nvb->dev);
+ cxl_nvdimm_bridge_state_work(cxl_nvb);
}
static int cxl_nvdimm_bridge_probe(struct device *dev)
@@ -177,8 +187,7 @@ static int cxl_nvdimm_bridge_probe(struc
}
cxl_nvb->state = CXL_NVB_ONLINE;
- if (queue_work(cxl_pmem_wq, &cxl_nvb->state_work))
- get_device(&cxl_nvb->dev);
+ cxl_nvdimm_bridge_state_work(cxl_nvb);
return 0;
}
From: D Scott Phillips <[email protected]>
commit 38e0257e0e6f4fef2aa2966b089b56a8b1cfb75c upstream.
The erratum 1418040 workaround enables CNTVCT_EL1 access trapping in EL0
when executing compat threads. The workaround is applied when switching
between tasks, but the need for the workaround could also change at an
exec(), when a non-compat task execs a compat binary or vice versa. Apply
the workaround in arch_setup_new_exec().
This leaves a small window of time between SET_PERSONALITY and
arch_setup_new_exec where preemption could occur and confuse the old
workaround logic that compares TIF_32BIT between prev and next. Instead, we
can just read cntkctl to make sure it's in the state that the next task
needs. I measured cntkctl read time to be about the same as a mov from a
general-purpose register on N1. Update the workaround logic to examine the
current value of cntkctl instead of the previous task's compat state.
Fixes: d49f7d7376d0 ("arm64: Move handling of erratum 1418040 into C code")
Cc: <[email protected]> # 5.9.x
Signed-off-by: D Scott Phillips <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/process.c | 39 ++++++++++++++++-----------------------
1 file changed, 16 insertions(+), 23 deletions(-)
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -439,34 +439,26 @@ static void entry_task_switch(struct tas
/*
* ARM erratum 1418040 handling, affecting the 32bit view of CNTVCT.
- * Assuming the virtual counter is enabled at the beginning of times:
- *
- * - disable access when switching from a 64bit task to a 32bit task
- * - enable access when switching from a 32bit task to a 64bit task
+ * Ensure access is disabled when switching to a 32bit task, ensure
+ * access is enabled when switching to a 64bit task.
*/
-static void erratum_1418040_thread_switch(struct task_struct *prev,
- struct task_struct *next)
+static void erratum_1418040_thread_switch(struct task_struct *next)
{
- bool prev32, next32;
- u64 val;
-
- if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040))
- return;
-
- prev32 = is_compat_thread(task_thread_info(prev));
- next32 = is_compat_thread(task_thread_info(next));
-
- if (prev32 == next32 || !this_cpu_has_cap(ARM64_WORKAROUND_1418040))
+ if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040) ||
+ !this_cpu_has_cap(ARM64_WORKAROUND_1418040))
return;
- val = read_sysreg(cntkctl_el1);
-
- if (!next32)
- val |= ARCH_TIMER_USR_VCT_ACCESS_EN;
+ if (is_compat_thread(task_thread_info(next)))
+ sysreg_clear_set(cntkctl_el1, ARCH_TIMER_USR_VCT_ACCESS_EN, 0);
else
- val &= ~ARCH_TIMER_USR_VCT_ACCESS_EN;
+ sysreg_clear_set(cntkctl_el1, 0, ARCH_TIMER_USR_VCT_ACCESS_EN);
+}
- write_sysreg(val, cntkctl_el1);
+static void erratum_1418040_new_exec(void)
+{
+ preempt_disable();
+ erratum_1418040_thread_switch(current);
+ preempt_enable();
}
/*
@@ -501,7 +493,7 @@ __notrace_funcgraph struct task_struct *
contextidr_thread_switch(next);
entry_task_switch(next);
ssbs_thread_switch(next);
- erratum_1418040_thread_switch(prev, next);
+ erratum_1418040_thread_switch(next);
ptrauth_thread_switch_user(next);
/*
@@ -613,6 +605,7 @@ void arch_setup_new_exec(void)
current->mm->context.flags = mmflags;
ptrauth_thread_init_user();
mte_thread_init_user();
+ erratum_1418040_new_exec();
if (task_spec_ssb_noexec(current)) {
arch_prctl_spec_ctrl_set(current, PR_SPEC_STORE_BYPASS,
From: Bhaumik Bhatt <[email protected]>
commit 42c4668f7efe1485dfc382517b412c0c6ab102b8 upstream.
The 'wake-capable' entry in channel configuration is not set when
parsing the configuration specified by the controller driver. Add
the missing entry to ensure channel is correctly specified as a
'wake-capable' channel.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers")
Cc: [email protected]
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Bhaumik Bhatt <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bus/mhi/core/init.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -788,6 +788,7 @@ static int parse_ch_cfg(struct mhi_contr
mhi_chan->offload_ch = ch_cfg->offload_channel;
mhi_chan->db_cfg.reset_req = ch_cfg->doorbell_mode_switch;
mhi_chan->pre_alloc = ch_cfg->auto_queue;
+ mhi_chan->wake_capable = ch_cfg->wake_capable;
/*
* If MHI host allocates buffers, then the channel direction
From: Johan Hovold <[email protected]>
commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Use the common control-message timeout define for the five-second
timeouts.
Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: [email protected] # 2.6.27
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/s2255/s2255drv.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/s2255/s2255drv.c
+++ b/drivers/media/usb/s2255/s2255drv.c
@@ -1882,7 +1882,7 @@ static long s2255_vendor_req(struct s225
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
Value, Index, buf,
- TransferBufferLength, HZ * 5);
+ TransferBufferLength, USB_CTRL_SET_TIMEOUT);
if (r >= 0)
memcpy(TransferBuffer, buf, TransferBufferLength);
@@ -1891,7 +1891,7 @@ static long s2255_vendor_req(struct s225
r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
Value, Index, buf,
- TransferBufferLength, HZ * 5);
+ TransferBufferLength, USB_CTRL_SET_TIMEOUT);
}
kfree(buf);
return r;
From: Michael Kuron <[email protected]>
commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream.
This fixes a problem where closing the tuner would leave it in a state
where it would not tune to any channel when reopened. This problem was
discovered as part of https://github.com/hselasky/webcamd/issues/16.
Since adap->id is 0 or 1, this bit-shift overflows, which is undefined
behavior. The driver still worked in practice as the overflow would in
most environments result in 0, which rendered the line a no-op. When
running the driver as part of webcamd however, the overflow could lead
to 0xff due to optimizations by the compiler, which would, in the end,
improperly shut down the tuner.
The bug is a regression introduced in the commit referenced below. The
present patch causes identical behavior to before that commit for
adap->id equal to 0 or 1. The driver does not contain support for
dib0700 devices with more adapters, assuming such even exist.
Tests have been performed with the Xbox One Digital TV Tuner on amd64.
Not all dib0700 devices are expected to be affected by the regression;
this code path is only taken by those with incorrect endpoint numbers.
Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org
Cc: [email protected]
Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed")
Signed-off-by: Michael Kuron <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb/dib0700_core.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -618,8 +618,6 @@ int dib0700_streaming_ctrl(struct dvb_us
deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->fe_adap[0].stream.props.endpoint);
if (onoff)
st->channel_state |= 1 << (adap->id);
- else
- st->channel_state |= 1 << ~(adap->id);
} else {
if (onoff)
st->channel_state |= 1 << (adap->fe_adap[0].stream.props.endpoint-2);
From: Johan Hovold <[email protected]>
commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Note that the driver was multiplying some of the timeout values with HZ
twice resulting in 3000-second timeouts with HZ=1000.
Also note that two of the timeout defines are currently unused.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: [email protected] # 3.0
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/b2c2/flexcop-usb.c | 10 +++++-----
drivers/media/usb/b2c2/flexcop-usb.h | 12 ++++++------
2 files changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -87,7 +87,7 @@ static int flexcop_usb_readwrite_dw(stru
0,
fc_usb->data,
sizeof(u32),
- B2C2_WAIT_FOR_OPERATION_RDW * HZ);
+ B2C2_WAIT_FOR_OPERATION_RDW);
if (ret != sizeof(u32)) {
err("error while %s dword from %d (%d).", read ? "reading" :
@@ -155,7 +155,7 @@ static int flexcop_usb_v8_memory_req(str
wIndex,
fc_usb->data,
buflen,
- nWaitTime * HZ);
+ nWaitTime);
if (ret != buflen)
ret = -EIO;
@@ -248,13 +248,13 @@ static int flexcop_usb_i2c_req(struct fl
/* DKT 020208 - add this to support special case of DiSEqC */
case USB_FUNC_I2C_CHECKWRITE:
pipe = B2C2_USB_CTRL_PIPE_OUT;
- nWaitTime = 2;
+ nWaitTime = 2000;
request_type |= USB_DIR_OUT;
break;
case USB_FUNC_I2C_READ:
case USB_FUNC_I2C_REPEATREAD:
pipe = B2C2_USB_CTRL_PIPE_IN;
- nWaitTime = 2;
+ nWaitTime = 2000;
request_type |= USB_DIR_IN;
break;
default:
@@ -281,7 +281,7 @@ static int flexcop_usb_i2c_req(struct fl
wIndex,
fc_usb->data,
buflen,
- nWaitTime * HZ);
+ nWaitTime);
if (ret != buflen)
ret = -EIO;
--- a/drivers/media/usb/b2c2/flexcop-usb.h
+++ b/drivers/media/usb/b2c2/flexcop-usb.h
@@ -91,13 +91,13 @@ typedef enum {
UTILITY_SRAM_TESTVERIFY = 0x16,
} flexcop_usb_utility_function_t;
-#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
-#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
+#define B2C2_WAIT_FOR_OPERATION_RW 1000
+#define B2C2_WAIT_FOR_OPERATION_RDW 3000
+#define B2C2_WAIT_FOR_OPERATION_WDW 1000
-#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8READ 3000
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3000
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3000
typedef enum {
V8_MEMORY_PAGE_DVB_CI = 0x20,
From: Yifeng Li <[email protected]>
commit e445375882883f69018aa669b67cbb37ec873406 upstream.
Like other SATA controller chips in the Marvell 88SE91xx series, the
Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents
it from working under IOMMU. Add it to the list of devices that need the
quirk.
Without this patch, device initialization fails with DMA errors:
ata8: softreset failed (1st FIS failed)
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
After applying the patch, the controller can be successfully initialized:
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
ata8.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100
ata8.00: configured for UDMA/100
scsi 7:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5
Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work
Reported-by: Sam Bingner <[email protected]>
Tested-by: Sam Bingner <[email protected]>
Tested-by: Yifeng Li <[email protected]>
Signed-off-by: Yifeng Li <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4103,6 +4103,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_M
quirk_dma_func1_alias);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c136 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9125,
+ quirk_dma_func1_alias);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 89dcb1da611d9b3ff0728502d58372fdaae9ebff ]
Right now we have a broken sequence where we enable DMA channel interrupts
which can be left enabled and never disabled if we hit an error path.
Worse still when we unload the driver, the DMA channel interrupt bits are
left intact. About the only saving grace here is that we do remember to
disable the wcnss interrupt when unload the driver.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 38 ++++++++++++++++++--------
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index aff04ef662663..0c4f63f1312f8 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -272,6 +272,21 @@ static int wcn36xx_dxe_enable_ch_int(struct wcn36xx *wcn, u16 wcn_ch)
return 0;
}
+static void wcn36xx_dxe_disable_ch_int(struct wcn36xx *wcn, u16 wcn_ch)
+{
+ int reg_data = 0;
+
+ wcn36xx_dxe_read_register(wcn,
+ WCN36XX_DXE_INT_MASK_REG,
+ ®_data);
+
+ reg_data &= ~wcn_ch;
+
+ wcn36xx_dxe_write_register(wcn,
+ WCN36XX_DXE_INT_MASK_REG,
+ (int)reg_data);
+}
+
static int wcn36xx_dxe_fill_skb(struct device *dev,
struct wcn36xx_dxe_ctl *ctl,
gfp_t gfp)
@@ -869,7 +884,6 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
WCN36XX_DXE_WQ_TX_L);
wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_REG_CH_EN, ®_data);
- wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_L);
/***************************************/
/* Init descriptors for TX HIGH channel */
@@ -893,9 +907,6 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_REG_CH_EN, ®_data);
- /* Enable channel interrupts */
- wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_H);
-
/***************************************/
/* Init descriptors for RX LOW channel */
/***************************************/
@@ -905,7 +916,6 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
goto out_err_rxl_ch;
}
-
/* For RX we need to preallocated buffers */
wcn36xx_dxe_ch_alloc_skb(wcn, &wcn->dxe_rx_l_ch);
@@ -928,9 +938,6 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
WCN36XX_DXE_REG_CTL_RX_L,
WCN36XX_DXE_CH_DEFAULT_CTL_RX_L);
- /* Enable channel interrupts */
- wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L);
-
/***************************************/
/* Init descriptors for RX HIGH channel */
/***************************************/
@@ -962,15 +969,18 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
WCN36XX_DXE_REG_CTL_RX_H,
WCN36XX_DXE_CH_DEFAULT_CTL_RX_H);
- /* Enable channel interrupts */
- wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H);
-
ret = wcn36xx_dxe_request_irqs(wcn);
if (ret < 0)
goto out_err_irq;
timer_setup(&wcn->tx_ack_timer, wcn36xx_dxe_tx_timer, 0);
+ /* Enable channel interrupts */
+ wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_L);
+ wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_H);
+ wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L);
+ wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H);
+
return 0;
out_err_irq:
@@ -987,6 +997,12 @@ out_err_txh_ch:
void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
{
+ /* Disable channel interrupts */
+ wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H);
+ wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L);
+ wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_H);
+ wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_L);
+
free_irq(wcn->tx_irq, wcn);
free_irq(wcn->rx_irq, wcn);
del_timer(&wcn->tx_ack_timer);
--
2.34.1
From: Hans Verkuil <[email protected]>
commit cd9d9377ed235b294a492a094e1666178a5e78fd upstream.
If V4L2_CAP_READWRITE is not set, then readbuffers must be set to 0,
otherwise v4l2-compliance will complain.
A note on the Fixes tag below: this patch does not really fix that commit,
but it can be applied from that commit onwards. For older code there is no
guarantee that device_caps is set, so even though this patch would apply,
it will not work reliably.
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: 049e684f2de9 (media: v4l2-dev: fix WARN_ON(!vdev->device_caps))
Cc: <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/v4l2-core/v4l2-ioctl.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -2088,6 +2088,7 @@ static int v4l_prepare_buf(const struct
static int v4l_g_parm(const struct v4l2_ioctl_ops *ops,
struct file *file, void *fh, void *arg)
{
+ struct video_device *vfd = video_devdata(file);
struct v4l2_streamparm *p = arg;
v4l2_std_id std;
int ret = check_fmt(file, p->type);
@@ -2099,7 +2100,8 @@ static int v4l_g_parm(const struct v4l2_
if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
return -EINVAL;
- p->parm.capture.readbuffers = 2;
+ if (vfd->device_caps & V4L2_CAP_READWRITE)
+ p->parm.capture.readbuffers = 2;
ret = ops->vidioc_g_std(file, fh, &std);
if (ret == 0)
v4l2_video_std_frame_period(std, &p->parm.capture.timeperframe);
From: Maxime Ripard <[email protected]>
[ Upstream commit c86b41214362e8e715e1343e16d5d6af0562db05 ]
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.
Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.
Since we also want to change the HSM clock rate and it's only valid
while the clock is disabled, we need to move the clk_set_min_rate() call
on the HSM clock above pm_runtime_get_and_sync().
Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Michael Stapelberg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 70 +++++++++++++++++++++-------------
1 file changed, 44 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 623a4699bd212..6b0700d0b408e 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -628,7 +628,6 @@ static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder,
vc4_hdmi->variant->phy_disable(vc4_hdmi);
clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock);
- clk_disable_unprepare(vc4_hdmi->hsm_clock);
clk_disable_unprepare(vc4_hdmi->pixel_clock);
ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
@@ -894,28 +893,10 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
conn_state_to_vc4_hdmi_conn_state(conn_state);
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- unsigned long bvb_rate, pixel_rate, hsm_rate;
+ unsigned long pixel_rate = vc4_conn_state->pixel_rate;
+ unsigned long bvb_rate, hsm_rate;
int ret;
- ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
- if (ret < 0) {
- DRM_ERROR("Failed to retain power domain: %d\n", ret);
- return;
- }
-
- pixel_rate = vc4_conn_state->pixel_rate;
- ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate);
- if (ret) {
- DRM_ERROR("Failed to set pixel clock rate: %d\n", ret);
- return;
- }
-
- ret = clk_prepare_enable(vc4_hdmi->pixel_clock);
- if (ret) {
- DRM_ERROR("Failed to turn on pixel clock: %d\n", ret);
- return;
- }
-
/*
* As stated in RPi's vc4 firmware "HDMI state machine (HSM) clock must
* be faster than pixel clock, infinitesimally faster, tested in
@@ -939,10 +920,21 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
return;
}
- ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
+ ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+ if (ret < 0) {
+ DRM_ERROR("Failed to retain power domain: %d\n", ret);
+ return;
+ }
+
+ ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate);
if (ret) {
- DRM_ERROR("Failed to turn on HSM clock: %d\n", ret);
- clk_disable_unprepare(vc4_hdmi->pixel_clock);
+ DRM_ERROR("Failed to set pixel clock rate: %d\n", ret);
+ return;
+ }
+
+ ret = clk_prepare_enable(vc4_hdmi->pixel_clock);
+ if (ret) {
+ DRM_ERROR("Failed to turn on pixel clock: %d\n", ret);
return;
}
@@ -958,7 +950,6 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate);
if (ret) {
DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
- clk_disable_unprepare(vc4_hdmi->hsm_clock);
clk_disable_unprepare(vc4_hdmi->pixel_clock);
return;
}
@@ -966,7 +957,6 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
if (ret) {
DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret);
- clk_disable_unprepare(vc4_hdmi->hsm_clock);
clk_disable_unprepare(vc4_hdmi->pixel_clock);
return;
}
@@ -2099,6 +2089,27 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)
return 0;
}
+static int __maybe_unused vc4_hdmi_runtime_suspend(struct device *dev)
+{
+ struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(vc4_hdmi->hsm_clock);
+
+ return 0;
+}
+
+static int vc4_hdmi_runtime_resume(struct device *dev)
+{
+ struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
{
const struct vc4_hdmi_variant *variant = of_device_get_match_data(dev);
@@ -2366,11 +2377,18 @@ static const struct of_device_id vc4_hdmi_dt_match[] = {
{}
};
+static const struct dev_pm_ops vc4_hdmi_pm_ops = {
+ SET_RUNTIME_PM_OPS(vc4_hdmi_runtime_suspend,
+ vc4_hdmi_runtime_resume,
+ NULL)
+};
+
struct platform_driver vc4_hdmi_driver = {
.probe = vc4_hdmi_dev_probe,
.remove = vc4_hdmi_dev_remove,
.driver = {
.name = "vc4_hdmi",
.of_match_table = vc4_hdmi_dt_match,
+ .pm = &vc4_hdmi_pm_ops,
},
};
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 3e85b81591609bb794bb00cd619b20965b5b38cd ]
When the firmware doesn't setup the HSM rate (such as when booting
without an HDMI cable plugged in), its rate is 0 and thus any register
access results in a CPU stall, even though HSM is enabled.
Let's enforce a minimum rate at boot to avoid this issue.
Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Michael Stapelberg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index ed8a4b7f8b6e2..623a4699bd212 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -94,6 +94,7 @@
# define VC4_HD_M_SW_RST BIT(2)
# define VC4_HD_M_ENABLE BIT(0)
+#define HSM_MIN_CLOCK_FREQ 120000000
#define CEC_CLOCK_FREQ 40000
#define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000)
@@ -2161,6 +2162,19 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4_hdmi->disable_4kp60 = true;
}
+ /*
+ * If we boot without any cable connected to the HDMI connector,
+ * the firmware will skip the HSM initialization and leave it
+ * with a rate of 0, resulting in a bus lockup when we're
+ * accessing the registers even if it's enabled.
+ *
+ * Let's put a sensible default at runtime_resume so that we
+ * don't end up in this situation.
+ */
+ ret = clk_set_min_rate(vc4_hdmi->hsm_clock, HSM_MIN_CLOCK_FREQ);
+ if (ret)
+ goto err_put_ddc;
+
if (vc4_hdmi->variant->reset)
vc4_hdmi->variant->reset(vc4_hdmi);
--
2.34.1
From: Baoquan He <[email protected]>
commit 62b3107073646e0946bd97ff926832bafb846d17 upstream.
Patch series "Handle warning of allocation failure on DMA zone w/o
managed pages", v4.
**Problem observed:
On x86_64, when crash is triggered and entering into kdump kernel, page
allocation failure can always be seen.
---------------------------------
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 1 Comm: swapper/0
Call Trace:
dump_stack+0x7f/0xa1
warn_alloc.cold+0x72/0xd6
......
__alloc_pages+0x24d/0x2c0
......
dma_atomic_pool_init+0xdb/0x176
do_one_initcall+0x67/0x320
? rcu_read_lock_sched_held+0x3f/0x80
kernel_init_freeable+0x290/0x2dc
? rest_init+0x24f/0x24f
kernel_init+0xa/0x111
ret_from_fork+0x22/0x30
Mem-Info:
------------------------------------
***Root cause:
In the current kernel, it assumes that DMA zone must have managed pages
and try to request pages if CONFIG_ZONE_DMA is enabled. While this is not
always true. E.g in kdump kernel of x86_64, only low 1M is presented and
locked down at very early stage of boot, so that this low 1M won't be
added into buddy allocator to become managed pages of DMA zone. This
exception will always cause page allocation failure if page is requested
from DMA zone.
***Investigation:
This failure happens since below commit merged into linus's tree.
1a6a9044b967 x86/setup: Remove CONFIG_X86_RESERVE_LOW and reservelow= options
23721c8e92f7 x86/crash: Remove crash_reserve_low_1M()
f1d4d47c5851 x86/setup: Always reserve the first 1M of RAM
7c321eb2b843 x86/kdump: Remove the backup region handling
6f599d84231f x86/kdump: Always reserve the low 1M when the crashkernel option is specified
Before them, on x86_64, the low 640K area will be reused by kdump kernel.
So in kdump kernel, the content of low 640K area is copied into a backup
region for dumping before jumping into kdump. Then except of those firmware
reserved region in [0, 640K], the left area will be added into buddy
allocator to become available managed pages of DMA zone.
However, after above commits applied, in kdump kernel of x86_64, the low
1M is reserved by memblock, but not released to buddy allocator. So any
later page allocation requested from DMA zone will fail.
At the beginning, if crashkernel is reserved, the low 1M need be locked
down because AMD SME encrypts memory making the old backup region
mechanims impossible when switching into kdump kernel.
Later, it was also observed that there are BIOSes corrupting memory
under 1M. To solve this, in commit f1d4d47c5851, the entire region of
low 1M is always reserved after the real mode trampoline is allocated.
Besides, recently, Intel engineer mentioned their TDX (Trusted domain
extensions) which is under development in kernel also needs to lock down
the low 1M. So we can't simply revert above commits to fix the page allocation
failure from DMA zone as someone suggested.
***Solution:
Currently, only DMA atomic pool and dma-kmalloc will initialize and
request page allocation with GFP_DMA during bootup.
So only initializ DMA atomic pool when DMA zone has available managed
pages, otherwise just skip the initialization.
For dma-kmalloc(), for the time being, let's mute the warning of
allocation failure if requesting pages from DMA zone while no manged
pages. Meanwhile, change code to use dma_alloc_xx/dma_map_xx API to
replace kmalloc(GFP_DMA), or do not use GFP_DMA when calling kmalloc() if
not necessary. Christoph is posting patches to fix those under
drivers/scsi/. Finally, we can remove the need of dma-kmalloc() as people
suggested.
This patch (of 3):
In some places of the current kernel, it assumes that dma zone must have
managed pages if CONFIG_ZONE_DMA is enabled. While this is not always
true. E.g in kdump kernel of x86_64, only low 1M is presented and locked
down at very early stage of boot, so that there's no managed pages at all
in DMA zone. This exception will always cause page allocation failure if
page is requested from DMA zone.
Here add function has_managed_dma() and the relevant helper functions to
check if there's DMA zone with managed pages. It will be used in later
patches.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Acked-by: John Donnelly <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Laight <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mmzone.h | 9 +++++++++
mm/page_alloc.c | 15 +++++++++++++++
2 files changed, 24 insertions(+)
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1031,6 +1031,15 @@ static inline int is_highmem_idx(enum zo
#endif
}
+#ifdef CONFIG_ZONE_DMA
+bool has_managed_dma(void);
+#else
+static inline bool has_managed_dma(void)
+{
+ return false;
+}
+#endif
+
/**
* is_highmem - helper function to quickly check if a struct zone is a
* highmem zone or not. This is an attempt to keep references
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -9449,3 +9449,18 @@ bool take_page_off_buddy(struct page *pa
return ret;
}
#endif
+
+#ifdef CONFIG_ZONE_DMA
+bool has_managed_dma(void)
+{
+ struct pglist_data *pgdat;
+
+ for_each_online_pgdat(pgdat) {
+ struct zone *zone = &pgdat->node_zones[ZONE_DMA];
+
+ if (managed_zone(zone))
+ return true;
+ }
+ return false;
+}
+#endif /* CONFIG_ZONE_DMA */
From: Brian Norris <[email protected]>
commit 514db871922f103886ad4d221cf406b4fcc5e74a upstream.
In commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we moved most HW configuration to bind(), but we
didn't move the runtime PM management. Therefore, depending on initial
boot state, runtime-PM workqueue delays, and other timing factors, we
may disable our power domain in between the hardware configuration
(bind()) and when we enable the display. This can cause us to lose
hardware state and fail to configure our display. For example:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-innolux-p079zca ff960000.mipi.0: failed to write command 0
or:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
We should match the runtime PM to the lifetime of the bind()/unbind()
cycle.
Tested on Acer Chrometab 10 (RK3399 Gru-Scarlet), with panel drivers
built either as modules or built-in.
Side notes: it seems one is more likely to see this problem when the
panel driver is built into the kernel. I've also seen this problem
bisect down to commits that simply changed Kconfig dependencies, because
it changed the order in which driver init functions were compiled into
the kernel, and therefore the ordering and timing of built-in device
probe.
Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Link: https://lore.kernel.org/linux-rockchip/[email protected]/
Reported-by: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.1.Ic2904d37f30013a7f3d8476203ad3733c186827e@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 37 ++++++++++++------------
1 file changed, 19 insertions(+), 18 deletions(-)
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -773,10 +773,6 @@ static void dw_mipi_dsi_encoder_enable(s
if (mux < 0)
return;
- pm_runtime_get_sync(dsi->dev);
- if (dsi->slave)
- pm_runtime_get_sync(dsi->slave->dev);
-
/*
* For the RK3399, the clk of grf must be enabled before writing grf
* register. And for RK3288 or other soc, this grf_clk must be NULL,
@@ -795,20 +791,10 @@ static void dw_mipi_dsi_encoder_enable(s
clk_disable_unprepare(dsi->grf_clk);
}
-static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
-{
- struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
-
- if (dsi->slave)
- pm_runtime_put(dsi->slave->dev);
- pm_runtime_put(dsi->dev);
-}
-
static const struct drm_encoder_helper_funcs
dw_mipi_dsi_encoder_helper_funcs = {
.atomic_check = dw_mipi_dsi_encoder_atomic_check,
.enable = dw_mipi_dsi_encoder_enable,
- .disable = dw_mipi_dsi_encoder_disable,
};
static int rockchip_dsi_drm_create_encoder(struct dw_mipi_dsi_rockchip *dsi,
@@ -938,10 +924,14 @@ static int dw_mipi_dsi_rockchip_bind(str
put_device(second);
}
+ pm_runtime_get_sync(dsi->dev);
+ if (dsi->slave)
+ pm_runtime_get_sync(dsi->slave->dev);
+
ret = clk_prepare_enable(dsi->pllref_clk);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to enable pllref_clk: %d\n", ret);
- return ret;
+ goto out_pm_runtime;
}
/*
@@ -953,7 +943,7 @@ static int dw_mipi_dsi_rockchip_bind(str
ret = clk_prepare_enable(dsi->grf_clk);
if (ret) {
DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
- return ret;
+ goto out_pm_runtime;
}
dw_mipi_dsi_rockchip_config(dsi);
@@ -965,16 +955,23 @@ static int dw_mipi_dsi_rockchip_bind(str
ret = rockchip_dsi_drm_create_encoder(dsi, drm_dev);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to create drm encoder\n");
- return ret;
+ goto out_pm_runtime;
}
ret = dw_mipi_dsi_bind(dsi->dmd, &dsi->encoder);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
- return ret;
+ goto out_pm_runtime;
}
return 0;
+
+out_pm_runtime:
+ pm_runtime_put(dsi->dev);
+ if (dsi->slave)
+ pm_runtime_put(dsi->slave->dev);
+
+ return ret;
}
static void dw_mipi_dsi_rockchip_unbind(struct device *dev,
@@ -989,6 +986,10 @@ static void dw_mipi_dsi_rockchip_unbind(
dw_mipi_dsi_unbind(dsi->dmd);
clk_disable_unprepare(dsi->pllref_clk);
+
+ pm_runtime_put(dsi->dev);
+ if (dsi->slave)
+ pm_runtime_put(dsi->slave->dev);
}
static const struct component_ops dw_mipi_dsi_rockchip_ops = {
From: Lad Prabhakar <[email protected]>
[ Upstream commit 981387ed06b96908223a607f5fba6efa42728fc2 ]
rpcif_sw_init() can fail so make sure we check the return value
of it and on error exit rpcif_hb_probe() callback with error code.
Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/hyperbus/rpc-if.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c
index ecb050ba95cdf..367b0d72bf622 100644
--- a/drivers/mtd/hyperbus/rpc-if.c
+++ b/drivers/mtd/hyperbus/rpc-if.c
@@ -124,7 +124,9 @@ static int rpcif_hb_probe(struct platform_device *pdev)
if (!hyperbus)
return -ENOMEM;
- rpcif_sw_init(&hyperbus->rpc, pdev->dev.parent);
+ error = rpcif_sw_init(&hyperbus->rpc, pdev->dev.parent);
+ if (error)
+ return error;
platform_set_drvdata(pdev, hyperbus);
--
2.34.1
From: Quentin Monnet <[email protected]>
[ Upstream commit ebbd7f64a3fbe9e0f235e39fc244ee9735e2a52a ]
Following the extraction of prog_dump() from do_dump(), the struct btf
allocated in prog_dump() is no longer freed on error; the struct
bpf_prog_linfo is not freed at all. Make sure we release them before
exiting the function.
Fixes: ec2025095cf6 ("bpftool: Match several programs with same tag")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/prog.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index fe59404e87046..f8755beb3d9eb 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -629,8 +629,8 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
char func_sig[1024];
unsigned char *buf;
__u32 member_len;
+ int fd, err = -1;
ssize_t n;
- int fd;
if (mode == DUMP_JITED) {
if (info->jited_prog_len == 0 || !info->jited_prog_insns) {
@@ -669,7 +669,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
if (fd < 0) {
p_err("can't open file %s: %s", filepath,
strerror(errno));
- return -1;
+ goto exit_free;
}
n = write(fd, buf, member_len);
@@ -677,7 +677,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
if (n != (ssize_t)member_len) {
p_err("error writing output file: %s",
n < 0 ? strerror(errno) : "short write");
- return -1;
+ goto exit_free;
}
if (json_output)
@@ -691,7 +691,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
info->netns_ino,
&disasm_opt);
if (!name)
- return -1;
+ goto exit_free;
}
if (info->nr_jited_func_lens && info->jited_func_lens) {
@@ -786,9 +786,12 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
kernel_syms_destroy(&dd);
}
- btf__free(btf);
+ err = 0;
- return 0;
+exit_free:
+ btf__free(btf);
+ bpf_prog_linfo__free(prog_linfo);
+ return err;
}
static int do_dump(int argc, char **argv)
--
2.34.1
From: Soenke Huster <[email protected]>
[ Upstream commit 1d0688421449718c6c5f46e458a378c9b530ba18 ]
On the reception of packets with an invalid packet type, the memory of
the allocated socket buffers is never freed. Add a default case that frees
these to avoid a memory leak.
Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Soenke Huster <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/virtio_bt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/virtio_bt.c b/drivers/bluetooth/virtio_bt.c
index 57908ce4fae85..076e4942a3f0e 100644
--- a/drivers/bluetooth/virtio_bt.c
+++ b/drivers/bluetooth/virtio_bt.c
@@ -202,6 +202,9 @@ static void virtbt_rx_handle(struct virtio_bluetooth *vbt, struct sk_buff *skb)
hci_skb_pkt_type(skb) = pkt_type;
hci_recv_frame(vbt->hdev, skb);
break;
+ default:
+ kfree_skb(skb);
+ break;
}
}
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 189723fbe9aca18d6f7d638c59a40288030932b5 ]
The "label" pointer is used for debug output. The code assumes that it
is either NULL or valid, but it is never set to NULL. It is either
valid or uninitialized.
Fixes: 0c275c30176b ("drm/bridge: Add bridge driver for display connectors")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013080825.GE6010@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/display-connector.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/display-connector.c b/drivers/gpu/drm/bridge/display-connector.c
index 05eb759da6fc6..847a0dce7f1d3 100644
--- a/drivers/gpu/drm/bridge/display-connector.c
+++ b/drivers/gpu/drm/bridge/display-connector.c
@@ -107,7 +107,7 @@ static int display_connector_probe(struct platform_device *pdev)
{
struct display_connector *conn;
unsigned int type;
- const char *label;
+ const char *label = NULL;
int ret;
conn = devm_kzalloc(&pdev->dev, sizeof(*conn), GFP_KERNEL);
--
2.34.1
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 588b45c88ae130fe373a8c50edaf54735c3f4fe3 ]
Firmware can trigger a missed beacon indication, this is not the same as a
lost signal.
Flag to Linux the missed beacon and let the WiFi stack decide for itself if
the link is up or down by sending its own probe to determine this.
We should only be signalling the link is lost when the firmware indicates
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 6ac770d8271eb..0ebef42feb695 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2679,7 +2679,7 @@ static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn,
wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n",
tmp->bss_index);
vif = wcn36xx_priv_to_vif(tmp);
- ieee80211_connection_loss(vif);
+ ieee80211_beacon_loss(vif);
}
return 0;
}
@@ -2694,7 +2694,7 @@ static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn,
wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n",
rsp->bss_index);
vif = wcn36xx_priv_to_vif(tmp);
- ieee80211_connection_loss(vif);
+ ieee80211_beacon_loss(vif);
return 0;
}
}
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit b7551457c5d0b3505b0be247d47919c1ee30506d ]
If we have a state already and disconnect/reconnect the display, the
SCDC messages won't be sent again since we didn't go through a disable /
enable cycle.
In order to fix this, let's call the vc4_hdmi_enable_scrambling function
in the detect callback if there is a mode and it needs the scrambler to
be enabled.
Fixes: c85695a2016e ("drm/vc4: hdmi: Enable the scrambler")
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 49944644a9b36..e880bdd8dcfd2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -162,6 +162,8 @@ static void vc4_hdmi_cec_update_clk_div(struct vc4_hdmi *vc4_hdmi)
static void vc4_hdmi_cec_update_clk_div(struct vc4_hdmi *vc4_hdmi) {}
#endif
+static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder);
+
static enum drm_connector_status
vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
{
@@ -190,6 +192,7 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
}
}
+ vc4_hdmi_enable_scrambling(&vc4_hdmi->encoder.base.base);
pm_runtime_put(&vc4_hdmi->pdev->dev);
return connector_status_connected;
}
--
2.34.1
From: Alexander Usyskin <[email protected]>
commit 6b0b80ac103b2a40c72a47c301745fd1f4ef4697 upstream.
Don't blindly copy status value received from the firmware
into internal client status field,
It may be positive and ERR_PTR(ret) will translate it
into an invalid address and the caller will crash.
Put the error code into the client status on failure.
Fixes: 369aea845951 ("mei: implement client dma setup.")
Cc: <[email protected]> # v5.11+
Reported-by: Emmanuel Grumbach <[email protected]>
Tested-by: : Emmanuel Grumbach <[email protected]>
Acked-by: Tomas Winkler <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/mei/hbm.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -672,10 +672,14 @@ static void mei_hbm_cl_dma_map_res(struc
if (!cl)
return;
- dev_dbg(dev->dev, "cl dma map result = %d\n", res->status);
- cl->status = res->status;
- if (!cl->status)
+ if (res->status) {
+ dev_err(dev->dev, "cl dma map failed %d\n", res->status);
+ cl->status = -EFAULT;
+ } else {
+ dev_dbg(dev->dev, "cl dma map succeeded\n");
cl->dma_mapped = 1;
+ cl->status = 0;
+ }
wake_up(&cl->wait);
}
@@ -698,10 +702,14 @@ static void mei_hbm_cl_dma_unmap_res(str
if (!cl)
return;
- dev_dbg(dev->dev, "cl dma unmap result = %d\n", res->status);
- cl->status = res->status;
- if (!cl->status)
+ if (res->status) {
+ dev_err(dev->dev, "cl dma unmap failed %d\n", res->status);
+ cl->status = -EFAULT;
+ } else {
+ dev_dbg(dev->dev, "cl dma unmap succeeded\n");
cl->dma_mapped = 0;
+ cl->status = 0;
+ }
wake_up(&cl->wait);
}
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit ed04ea76e69e7194f7489cebe23a32a68f39218d ]
When deiniting the DXE hardware we should reset the block to ensure there
is no spurious DMA write transaction from the downstream WCNSS to upstream
MSM at a skbuff address we will have released.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 017c7d78072ba..e1a35c2eadb6c 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -997,6 +997,8 @@ out_err_txh_ch:
void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
{
+ int reg_data = 0;
+
/* Disable channel interrupts */
wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H);
wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L);
@@ -1012,6 +1014,10 @@ void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
wcn->tx_ack_skb = NULL;
}
+ /* Put the DXE block into reset before freeing memory */
+ reg_data = WCN36XX_DXE_REG_RESET;
+ wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_REG_CSR_RESET, reg_data);
+
wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_l_ch);
wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_h_ch);
--
2.34.1
From: Brian Norris <[email protected]>
[ Upstream commit 32a267e9c057e1636e7afdd20599aa5741a73079 ]
If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.
This problem exists since the driver's introduction, but is especially
relevant after refactored for dual-DSI variants.
Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver")
Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels")
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
index aea3162253914..f194b62e290ca 100644
--- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
+++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
@@ -484,6 +484,7 @@ static void innolux_panel_del(struct innolux_panel *innolux)
static int innolux_panel_probe(struct mipi_dsi_device *dsi)
{
const struct panel_desc *desc;
+ struct innolux_panel *innolux;
int err;
desc = of_device_get_match_data(&dsi->dev);
@@ -495,7 +496,14 @@ static int innolux_panel_probe(struct mipi_dsi_device *dsi)
if (err < 0)
return err;
- return mipi_dsi_attach(dsi);
+ err = mipi_dsi_attach(dsi);
+ if (err < 0) {
+ innolux = mipi_dsi_get_drvdata(dsi);
+ innolux_panel_del(innolux);
+ return err;
+ }
+
+ return 0;
}
static int innolux_panel_remove(struct mipi_dsi_device *dsi)
--
2.34.1
From: Brian Norris <[email protected]>
[ Upstream commit 5f31dbeae8a88f31c3eb4eb526ab4807c40da241 ]
If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.
Fixes: 2a994cbed6b2 ("drm/panel: Add Kingdisplay KD097D04 panel driver")
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.1.Icb4d9dbc1817f4e826361a4f1cea7461541668f0@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c b/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c
index 86e4213e8bb13..daccb1fd5fdad 100644
--- a/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c
+++ b/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c
@@ -406,7 +406,13 @@ static int kingdisplay_panel_probe(struct mipi_dsi_device *dsi)
if (err < 0)
return err;
- return mipi_dsi_attach(dsi);
+ err = mipi_dsi_attach(dsi);
+ if (err < 0) {
+ kingdisplay_panel_del(kingdisplay);
+ return err;
+ }
+
+ return 0;
}
static int kingdisplay_panel_remove(struct mipi_dsi_device *dsi)
--
2.34.1
From: Jaegeuk Kim <[email protected]>
commit 19bdba5265624ba6b9d9dd936a0c6ccc167cfe80 upstream.
Android OTA failed due to SBI_NEED_FSCK flag when pinning the file. Let's avoid
it since we can do in-place-updates.
Cc: [email protected]
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/data.c | 7 +++++--
fs/f2fs/file.c | 10 +++++-----
2 files changed, 10 insertions(+), 7 deletions(-)
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2564,6 +2564,11 @@ bool f2fs_should_update_outplace(struct
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
+ /* The below cases were checked when setting it. */
+ if (f2fs_is_pinned_file(inode))
+ return false;
+ if (fio && is_sbi_flag_set(sbi, SBI_NEED_FSCK))
+ return true;
if (f2fs_lfs_mode(sbi))
return true;
if (S_ISDIR(inode->i_mode))
@@ -2572,8 +2577,6 @@ bool f2fs_should_update_outplace(struct
return true;
if (f2fs_is_atomic_file(inode))
return true;
- if (is_sbi_flag_set(sbi, SBI_NEED_FSCK))
- return true;
/* swap file is migrating in aligned write mode */
if (is_inode_flag_set(inode, FI_ALIGNED_WRITE))
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -3143,17 +3143,17 @@ static int f2fs_ioc_set_pin_file(struct
inode_lock(inode);
- if (f2fs_should_update_outplace(inode, NULL)) {
- ret = -EINVAL;
- goto out;
- }
-
if (!pin) {
clear_inode_flag(inode, FI_PIN_FILE);
f2fs_i_gc_failures_write(inode, 0);
goto done;
}
+ if (f2fs_should_update_outplace(inode, NULL)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
if (f2fs_pin_file_control(inode, false)) {
ret = -EAGAIN;
goto out;
From: Christian Hewitt <[email protected]>
[ Upstream commit 8182a35868db5f053111d5d9d4da8fcb3f99259d ]
Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
node to ensure HDMI is powered in the early stages of boot.
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a350fee1264d7..8e2af986cebaf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -64,6 +64,7 @@
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
@@ -161,6 +162,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&vddio_ao18>;
};
&hdmi_tx_tmds_port {
--
2.34.1
From: Wang Hai <[email protected]>
[ Upstream commit ab599eb11882f834951c436cc080c3455ba32b9b ]
I got a use-after-free report:
dvbdev: dvb_register_device: failed to create device dvb1.dvr0 (-12)
...
==================================================================
BUG: KASAN: use-after-free in dvb_dmxdev_release+0xce/0x2f0
...
Call Trace:
dump_stack_lvl+0x6c/0x8b
print_address_description.constprop.0+0x48/0x70
kasan_report.cold+0x82/0xdb
__asan_load4+0x6b/0x90
dvb_dmxdev_release+0xce/0x2f0
...
Allocated by task 7666:
kasan_save_stack+0x23/0x50
__kasan_kmalloc+0x83/0xa0
kmem_cache_alloc_trace+0x22e/0x470
dvb_register_device+0x12f/0x980
dvb_dmxdev_init+0x1f3/0x230
...
Freed by task 7666:
kasan_save_stack+0x23/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x24/0x40
__kasan_slab_free+0xf2/0x130
kfree+0xd1/0x5c0
dvb_register_device.cold+0x1ac/0x1fa
dvb_dmxdev_init+0x1f3/0x230
...
When dvb_register_device() in dvb_dmxdev_init() fails, dvb_dmxdev_init()
does not return a failure, and the memory pointed to by dvbdev or
dvr_dvbdev is invalid at this point. If they are used subsequently, it
will result in UFA or null-ptr-deref.
If dvb_register_device() in dvb_dmxdev_init() fails, fix the bug by making
dvb_dmxdev_init() return an error as well.
Link: https://lore.kernel.org/linux-media/[email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/dvb-core/dmxdev.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/media/dvb-core/dmxdev.c b/drivers/media/dvb-core/dmxdev.c
index 5d5a48475a54f..01f288fa37e0e 100644
--- a/drivers/media/dvb-core/dmxdev.c
+++ b/drivers/media/dvb-core/dmxdev.c
@@ -1413,7 +1413,7 @@ static const struct dvb_device dvbdev_dvr = {
};
int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
{
- int i;
+ int i, ret;
if (dmxdev->demux->open(dmxdev->demux) < 0)
return -EUSERS;
@@ -1432,14 +1432,26 @@ int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
DMXDEV_STATE_FREE);
}
- dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev,
+ ret = dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev,
DVB_DEVICE_DEMUX, dmxdev->filternum);
- dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr,
+ if (ret < 0)
+ goto err_register_dvbdev;
+
+ ret = dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr,
dmxdev, DVB_DEVICE_DVR, dmxdev->filternum);
+ if (ret < 0)
+ goto err_register_dvr_dvbdev;
dvb_ringbuffer_init(&dmxdev->dvr_buffer, NULL, 8192);
return 0;
+
+err_register_dvr_dvbdev:
+ dvb_unregister_device(dmxdev->dvbdev);
+err_register_dvbdev:
+ vfree(dmxdev->filter);
+ dmxdev->filter = NULL;
+ return ret;
}
EXPORT_SYMBOL(dvb_dmxdev_init);
--
2.34.1
From: Chengfeng Ye <[email protected]>
[ Upstream commit 4a9dbd021970ffe1b92521328377b699acba7c52 ]
Pointer alg points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing alg before free tmpl.
Fixes: 9363efb4 ("crypto: qce - Add support for AEAD algorithms")
Signed-off-by: Chengfeng Ye <[email protected]>
Acked-by: Thara Gopinath <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qce/aead.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/qce/aead.c b/drivers/crypto/qce/aead.c
index 290e2446a2f35..97a530171f07a 100644
--- a/drivers/crypto/qce/aead.c
+++ b/drivers/crypto/qce/aead.c
@@ -802,8 +802,8 @@ static int qce_aead_register_one(const struct qce_aead_def *def, struct qce_devi
ret = crypto_register_aead(alg);
if (ret) {
- kfree(tmpl);
dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name);
+ kfree(tmpl);
return ret;
}
--
2.34.1
From: Brian Norris <[email protected]>
commit e584cdc1549932f87a2707b56bc588cfac5d89e0 upstream.
Since commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we perform most HW configuration in the bind()
function. This configuration may be lost on suspend/resume, so we
need to call it again. That may lead to errors like this after system
suspend/resume:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet).
Note that early mailing list versions of this driver borrowed Rockchip's
downstream/BSP solution, to do HW configuration in mode_set() (which
*is* called at the appropriate pre-enable() times), but that was
discarded along the way. I've avoided that still, because mode_set()
documentation doesn't suggest this kind of purpose as far as I can tell.
Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Cc: <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.2.I4e9d93aadb00b1ffc7d506e3186a25492bf0b732@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 37 ++++++++++++++++++++++++
1 file changed, 37 insertions(+)
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -268,6 +268,8 @@ struct dw_mipi_dsi_rockchip {
struct dw_mipi_dsi *dmd;
const struct rockchip_dw_dsi_chip_data *cdata;
struct dw_mipi_dsi_plat_data pdata;
+
+ bool dsi_bound;
};
struct dphy_pll_parameter_map {
@@ -964,6 +966,8 @@ static int dw_mipi_dsi_rockchip_bind(str
goto out_pll_clk;
}
+ dsi->dsi_bound = true;
+
return 0;
out_pll_clk:
@@ -985,6 +989,8 @@ static void dw_mipi_dsi_rockchip_unbind(
if (dsi->is_slave)
return;
+ dsi->dsi_bound = false;
+
dw_mipi_dsi_unbind(dsi->dmd);
clk_disable_unprepare(dsi->pllref_clk);
@@ -1279,6 +1285,36 @@ static const struct phy_ops dw_mipi_dsi_
.exit = dw_mipi_dsi_dphy_exit,
};
+static int __maybe_unused dw_mipi_dsi_rockchip_resume(struct device *dev)
+{
+ struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
+ int ret;
+
+ /*
+ * Re-configure DSI state, if we were previously initialized. We need
+ * to do this before rockchip_drm_drv tries to re-enable() any panels.
+ */
+ if (dsi->dsi_bound) {
+ ret = clk_prepare_enable(dsi->grf_clk);
+ if (ret) {
+ DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
+ return ret;
+ }
+
+ dw_mipi_dsi_rockchip_config(dsi);
+ if (dsi->slave)
+ dw_mipi_dsi_rockchip_config(dsi->slave);
+
+ clk_disable_unprepare(dsi->grf_clk);
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops dw_mipi_dsi_rockchip_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, dw_mipi_dsi_rockchip_resume)
+};
+
static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1592,6 +1628,7 @@ struct platform_driver dw_mipi_dsi_rockc
.remove = dw_mipi_dsi_rockchip_remove,
.driver = {
.of_match_table = dw_mipi_dsi_rockchip_dt_ids,
+ .pm = &dw_mipi_dsi_rockchip_pm_ops,
.name = "dw-mipi-dsi-rockchip",
},
};
From: Vladimir Zapolskiy <[email protected]>
[ Upstream commit e0e27c3d4e20dab861566f1c348ae44e4b498630 ]
Re-enabling an interrupt from its own interrupt handler may cause
an interrupt storm, if there is a pending interrupt and because its
handling is disabled due to already done entrance into the handler
above in the stack.
Also, apparently it is improper to lock a mutex in an interrupt contex.
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 0138b2ec406dc..35d93361fda1a 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -343,9 +343,9 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
/* Disable interrupt and enable polling */
disable_irq_nosync(c_data->throttle_irq);
- qcom_lmh_dcvs_notify(c_data);
+ schedule_delayed_work(&c_data->throttle_work, 0);
- return 0;
+ return IRQ_HANDLED;
}
static const struct qcom_cpufreq_soc_data qcom_soc_data = {
--
2.34.1
From: Jammy Huang <[email protected]>
[ Upstream commit af6d1bde395cac174ee71adcd3fa43f6435c7206 ]
If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But
v4l2_input_status won't be updated to no-signal immediately until
aspeed_video_get_resolution() in aspeed_video_resolution_work().
During the period of time, aspeed_video_start_frame() could be called
because it doesn't know signal becomes unstable now. If it goes with
aspeed_video_init_regs() of aspeed_video_irq_res_change()
simultaneously, it will mess up hw state.
To fix this problem, v4l2_input_status is updated to no-signal
immediately for VE_INTERRUPT_MODE_DETECT_WD irq.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
Acked-by: Paul Menzel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/aspeed-video.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 23c41c545c536..debc7509c173c 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -556,6 +556,8 @@ static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
set_bit(VIDEO_RES_CHANGE, &video->flags);
clear_bit(VIDEO_FRAME_INPRG, &video->flags);
+ video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
+
aspeed_video_off(video);
aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
@@ -1337,7 +1339,6 @@ static void aspeed_video_resolution_work(struct work_struct *work)
struct delayed_work *dwork = to_delayed_work(work);
struct aspeed_video *video = container_of(dwork, struct aspeed_video,
res_work);
- u32 input_status = video->v4l2_input_status;
aspeed_video_on(video);
@@ -1350,8 +1351,7 @@ static void aspeed_video_resolution_work(struct work_struct *work)
aspeed_video_get_resolution(video);
if (video->detected_timings.width != video->active_timings.width ||
- video->detected_timings.height != video->active_timings.height ||
- input_status != video->v4l2_input_status) {
+ video->detected_timings.height != video->active_timings.height) {
static const struct v4l2_event ev = {
.type = V4L2_EVENT_SOURCE_CHANGE,
.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit e1921cd14640f0f4d1fad5eb8e448c58a536415d ]
When config.mode is IA_CSS_INPUT_MODE_BUFFERED_SENSOR, it rather needs
buffers. Fix it by inverting the return value.
Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/sh_css_mipi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
index 75489f7d75eec..483d40a467c74 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
@@ -374,17 +374,17 @@ static bool buffers_needed(struct ia_css_pipe *pipe)
{
if (!IS_ISP2401) {
if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR)
- return false;
- else
return true;
+ else
+ return false;
}
if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR ||
pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG ||
pipe->stream->config.mode == IA_CSS_INPUT_MODE_PRBS)
- return false;
+ return true;
- return true;
+ return false;
}
int
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit 6e1c9bc9ae96e57bcd8807174f2c0f44f9ef7938 ]
ov8865_state_init() calls ov8865_state_mipi_configure() which uses
__v4l2_ctrl_s_ctrl[_int64](). This means that sensor->mutex (which
is also sensor->ctrls.handler.lock) must be locked before calling
ov8865_state_init().
Note ov8865_state_mipi_configure() is also used in other places where
the lock is already held so it cannot be changed itself.
This fixes the following lockdep kernel WARN:
[ 13.233421] WARNING: CPU: 0 PID: 8 at drivers/media/v4l2-core/v4l2-ctrls-api.c:833 __v4l2_ctrl_s_ctrl+0x4d/0x60 [videodev]
...
[ 13.234063] Call Trace:
[ 13.234074] ov8865_state_configure+0x98b/0xc00 [ov8865]
[ 13.234095] ov8865_probe+0x4b1/0x54c [ov8865]
[ 13.234117] i2c_device_probe+0x13c/0x2d0
Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov8865.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -2893,7 +2893,9 @@ static int ov8865_probe(struct i2c_clien
if (ret)
goto error_mutex;
+ mutex_lock(&sensor->mutex);
ret = ov8865_state_init(sensor);
+ mutex_unlock(&sensor->mutex);
if (ret)
goto error_ctrls;
From: Christophe JAILLET <[email protected]>
[ Upstream commit e4debea9be7d5db52bc6a565a4c02c3c6560d093 ]
The normal path of the function makes the assumption that
'pm_ops->core_power' may be NULL.
We should make the same assumption in the error handling path or a NULL
pointer dereference may occur.
Add the missing test before calling 'pm_ops->core_power'
Fixes: 9e8efdb57879 ("media: venus: core: vote for video-mem path")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 91b15842c5558..84cd92628cfdc 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -472,7 +472,8 @@ static __maybe_unused int venus_runtime_suspend(struct device *dev)
err_video_path:
icc_set_bw(core->cpucfg_path, kbps_to_icc(1000), 0);
err_cpucfg_path:
- pm_ops->core_power(core, POWER_ON);
+ if (pm_ops->core_power)
+ pm_ops->core_power(core, POWER_ON);
return ret;
}
--
2.34.1
From: Michael Walle <[email protected]>
[ Upstream commit c048b60d39e109c201d31ed5ad3a4f939064d6c4 ]
If there is more than one mtd device which supports OTP, there will
be a kernel warning about duplicated sysfs entries and the probing will
fail. This is because the nvmem device name is not unique. Make it
unique by prepending the name of the mtd. E.g. before the name was
"user-otp", now it will be "mtd0-user-otp".
For reference the kernel splash is:
[ 4.665531] sysfs: cannot create duplicate filename '/bus/nvmem/devices/user-otp'
[ 4.673056] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-next-20211101+ #1296
[ 4.680565] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
[ 4.688856] Call trace:
[ 4.691303] dump_backtrace+0x0/0x1bc
[ 4.694984] show_stack+0x24/0x30
[ 4.698306] dump_stack_lvl+0x68/0x84
[ 4.701980] dump_stack+0x18/0x34
[ 4.705302] sysfs_warn_dup+0x70/0x90
[ 4.708973] sysfs_do_create_link_sd+0x144/0x150
[ 4.713603] sysfs_create_link+0x2c/0x50
[ 4.717535] bus_add_device+0x74/0x120
[ 4.721293] device_add+0x330/0x890
[ 4.724791] device_register+0x2c/0x40
[ 4.728550] nvmem_register+0x240/0x9f0
[ 4.732398] mtd_otp_nvmem_register+0xb0/0x10c
[ 4.736854] mtd_device_parse_register+0x28c/0x2b4
[ 4.741659] spi_nor_probe+0x20c/0x2e0
[ 4.745418] spi_mem_probe+0x78/0xbc
[ 4.749001] spi_probe+0x90/0xf0
[ 4.752237] really_probe.part.0+0xa4/0x320
..
[ 4.873936] mtd mtd1: Failed to register OTP NVMEM device
[ 4.894468] spi-nor: probe of spi0.0 failed with error -17
Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support")
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/mtdcore.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 1532291989471..54df9cfd588ea 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -825,8 +825,7 @@ static struct nvmem_device *mtd_otp_nvmem_register(struct mtd_info *mtd,
/* OTP nvmem will be registered on the physical device */
config.dev = mtd->dev.parent;
- /* just reuse the compatible as name */
- config.name = compatible;
+ config.name = kasprintf(GFP_KERNEL, "%s-%s", dev_name(&mtd->dev), compatible);
config.id = NVMEM_DEVID_NONE;
config.owner = THIS_MODULE;
config.type = NVMEM_TYPE_OTP;
@@ -842,6 +841,7 @@ static struct nvmem_device *mtd_otp_nvmem_register(struct mtd_info *mtd,
nvmem = NULL;
of_node_put(np);
+ kfree(config.name);
return nvmem;
}
--
2.34.1
From: Yang Yingliang <[email protected]>
[ Upstream commit 68bf78ff59a0891eb1239948e94ce10f73a9dd30 ]
If it fails to allocate 'dot11d_info', rtllib_softmac_init()
should return error code. And remove unneccessary error message.
Fixes: 94a799425eee ("From: wlanfae <[email protected]>")
Reviewed-by: Dan Carpenter <[email protected]>
Reviewed-by: Pavel Skripkin <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8192e/rtllib.h | 2 +-
drivers/staging/rtl8192e/rtllib_softmac.c | 6 ++++--
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index c6f8b772335c1..c985e4ebc545a 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -1980,7 +1980,7 @@ void SendDisassociation(struct rtllib_device *ieee, bool deauth, u16 asRsn);
void rtllib_softmac_xmit(struct rtllib_txb *txb, struct rtllib_device *ieee);
void rtllib_start_ibss(struct rtllib_device *ieee);
-void rtllib_softmac_init(struct rtllib_device *ieee);
+int rtllib_softmac_init(struct rtllib_device *ieee);
void rtllib_softmac_free(struct rtllib_device *ieee);
void rtllib_disassociate(struct rtllib_device *ieee);
void rtllib_stop_scan(struct rtllib_device *ieee);
diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index d2726d01c7573..503d33be71d99 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -2952,7 +2952,7 @@ void rtllib_start_protocol(struct rtllib_device *ieee)
}
}
-void rtllib_softmac_init(struct rtllib_device *ieee)
+int rtllib_softmac_init(struct rtllib_device *ieee)
{
int i;
@@ -2963,7 +2963,8 @@ void rtllib_softmac_init(struct rtllib_device *ieee)
ieee->seq_ctrl[i] = 0;
ieee->dot11d_info = kzalloc(sizeof(struct rt_dot11d_info), GFP_ATOMIC);
if (!ieee->dot11d_info)
- netdev_err(ieee->dev, "Can't alloc memory for DOT11D\n");
+ return -ENOMEM;
+
ieee->LinkDetectInfo.SlotIndex = 0;
ieee->LinkDetectInfo.SlotNum = 2;
ieee->LinkDetectInfo.NumRecvBcnInPeriod = 0;
@@ -3029,6 +3030,7 @@ void rtllib_softmac_init(struct rtllib_device *ieee)
tasklet_setup(&ieee->ps_task, rtllib_sta_ps);
+ return 0;
}
void rtllib_softmac_free(struct rtllib_device *ieee)
--
2.34.1
From: Loic Poulain <[email protected]>
commit f77097ec8c0141a4b5cf3722a246be0cb5677e29 upstream.
There is no reason for shutting down MHI ungracefully on freeze,
this causes the MHI host stack & device stack to not be aligned
anymore since the proper MHI reset sequence is not performed for
ungraceful shutdown.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Cc: [email protected]
Suggested-by: Bhaumik Bhatt <[email protected]>
Reviewed-by: Bhaumik Bhatt <[email protected]>
Reviewed-by: Hemant Kumar <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bus/mhi/pci_generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -1018,7 +1018,7 @@ static int __maybe_unused mhi_pci_freeze
* context.
*/
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
- mhi_power_down(mhi_cntrl, false);
+ mhi_power_down(mhi_cntrl, true);
mhi_unprepare_after_power_down(mhi_cntrl);
}
From: Quentin Monnet <[email protected]>
[ Upstream commit 3f7a3318a7c60947e27be372950840a5eab976d0 ]
API headers from libbpf should not be accessed directly from the source
directory. Instead, they should be exported with "make install_headers".
Make sure that samples/bpf/Makefile installs the headers properly when
building.
The object compiled from and exported by libbpf are now placed into a
subdirectory of sample/bpf/ instead of remaining in tools/lib/bpf/. We
attempt to remove this directory on "make clean". However, the "clean"
target re-enters the samples/bpf/ directory from the root of the
repository ("$(MAKE) -C ../../ M=$(CURDIR) clean"), in such a way that
$(srctree) and $(src) are not defined, making it impossible to use
$(LIBBPF_OUTPUT) and $(LIBBPF_DESTDIR) in the recipe. So we only attempt
to clean $(CURDIR)/libbpf, which is the default value.
Add a dependency on libbpf's headers for the $(TRACE_HELPERS).
We also change the output directory for bpftool, to place the generated
objects under samples/bpf/bpftool/ instead of building in bpftool's
directory directly. Doing so, we make sure bpftool reuses the libbpf
library previously compiled and installed.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/Makefile | 40 ++++++++++++++++++++++++++++++----------
1 file changed, 30 insertions(+), 10 deletions(-)
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 5fd48a8d4f10a..01993b502f6a4 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -59,7 +59,11 @@ tprogs-y += xdp_redirect
tprogs-y += xdp_monitor
# Libbpf dependencies
-LIBBPF = $(TOOLS_PATH)/lib/bpf/libbpf.a
+LIBBPF_SRC = $(TOOLS_PATH)/lib/bpf
+LIBBPF_OUTPUT = $(abspath $(BPF_SAMPLES_PATH))/libbpf
+LIBBPF_DESTDIR = $(LIBBPF_OUTPUT)
+LIBBPF_INCLUDE = $(LIBBPF_DESTDIR)/include
+LIBBPF = $(LIBBPF_OUTPUT)/libbpf.a
CGROUP_HELPERS := ../../tools/testing/selftests/bpf/cgroup_helpers.o
TRACE_HELPERS := ../../tools/testing/selftests/bpf/trace_helpers.o
@@ -198,7 +202,7 @@ TPROGS_CFLAGS += -Wstrict-prototypes
TPROGS_CFLAGS += -I$(objtree)/usr/include
TPROGS_CFLAGS += -I$(srctree)/tools/testing/selftests/bpf/
-TPROGS_CFLAGS += -I$(srctree)/tools/lib/
+TPROGS_CFLAGS += -I$(LIBBPF_INCLUDE)
TPROGS_CFLAGS += -I$(srctree)/tools/include
TPROGS_CFLAGS += -I$(srctree)/tools/perf
TPROGS_CFLAGS += -DHAVE_ATTR_TEST=0
@@ -268,16 +272,27 @@ all:
clean:
$(MAKE) -C ../../ M=$(CURDIR) clean
@find $(CURDIR) -type f -name '*~' -delete
+ @$(RM) -r $(CURDIR)/libbpf $(CURDIR)/bpftool
-$(LIBBPF): FORCE
+$(LIBBPF): FORCE | $(LIBBPF_OUTPUT)
# Fix up variables inherited from Kbuild that tools/ build system won't like
- $(MAKE) -C $(dir $@) RM='rm -rf' EXTRA_CFLAGS="$(TPROGS_CFLAGS)" \
- LDFLAGS=$(TPROGS_LDFLAGS) srctree=$(BPF_SAMPLES_PATH)/../../ O=
+ $(MAKE) -C $(LIBBPF_SRC) RM='rm -rf' EXTRA_CFLAGS="$(TPROGS_CFLAGS)" \
+ LDFLAGS=$(TPROGS_LDFLAGS) srctree=$(BPF_SAMPLES_PATH)/../../ \
+ O= OUTPUT=$(LIBBPF_OUTPUT)/ DESTDIR=$(LIBBPF_DESTDIR) prefix= \
+ $@ install_headers
BPFTOOLDIR := $(TOOLS_PATH)/bpf/bpftool
-BPFTOOL := $(BPFTOOLDIR)/bpftool
-$(BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile)
- $(MAKE) -C $(BPFTOOLDIR) srctree=$(BPF_SAMPLES_PATH)/../../
+BPFTOOL_OUTPUT := $(abspath $(BPF_SAMPLES_PATH))/bpftool
+BPFTOOL := $(BPFTOOL_OUTPUT)/bpftool
+$(BPFTOOL): $(LIBBPF) $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) | $(BPFTOOL_OUTPUT)
+ $(MAKE) -C $(BPFTOOLDIR) srctree=$(BPF_SAMPLES_PATH)/../../ \
+ OUTPUT=$(BPFTOOL_OUTPUT)/ \
+ LIBBPF_OUTPUT=$(LIBBPF_OUTPUT)/ \
+ LIBBPF_DESTDIR=$(LIBBPF_DESTDIR)/
+
+$(LIBBPF_OUTPUT) $(BPFTOOL_OUTPUT):
+ $(call msg,MKDIR,$@)
+ $(Q)mkdir -p $@
$(obj)/syscall_nrs.h: $(obj)/syscall_nrs.s FORCE
$(call filechk,offsets,__SYSCALL_NRS_H__)
@@ -309,6 +324,11 @@ verify_target_bpf: verify_cmds
$(BPF_SAMPLES_PATH)/*.c: verify_target_bpf $(LIBBPF)
$(src)/*.c: verify_target_bpf $(LIBBPF)
+libbpf_hdrs: $(LIBBPF)
+$(obj)/$(TRACE_HELPERS): | libbpf_hdrs
+
+.PHONY: libbpf_hdrs
+
$(obj)/xdp_redirect_cpu_user.o: $(obj)/xdp_redirect_cpu.skel.h
$(obj)/xdp_redirect_map_multi_user.o: $(obj)/xdp_redirect_map_multi.skel.h
$(obj)/xdp_redirect_map_user.o: $(obj)/xdp_redirect_map.skel.h
@@ -366,7 +386,7 @@ $(obj)/%.bpf.o: $(src)/%.bpf.c $(obj)/vmlinux.h $(src)/xdp_sample.bpf.h $(src)/x
$(Q)$(CLANG) -g -O2 -target bpf -D__TARGET_ARCH_$(SRCARCH) \
-Wno-compare-distinct-pointer-types -I$(srctree)/include \
-I$(srctree)/samples/bpf -I$(srctree)/tools/include \
- -I$(srctree)/tools/lib $(CLANG_SYS_INCLUDES) \
+ -I$(LIBBPF_INCLUDE) $(CLANG_SYS_INCLUDES) \
-c $(filter %.bpf.c,$^) -o $@
LINKED_SKELS := xdp_redirect_cpu.skel.h xdp_redirect_map_multi.skel.h \
@@ -403,7 +423,7 @@ $(obj)/%.o: $(src)/%.c
@echo " CLANG-bpf " $@
$(Q)$(CLANG) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(BPF_EXTRA_CFLAGS) \
-I$(obj) -I$(srctree)/tools/testing/selftests/bpf/ \
- -I$(srctree)/tools/lib/ \
+ -I$(LIBBPF_INCLUDE) \
-D__KERNEL__ -D__BPF_TRACING__ -Wno-unused-value -Wno-pointer-sign \
-D__TARGET_ARCH_$(SRCARCH) -Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
--
2.34.1
From: Gaurav Jain <[email protected]>
[ Upstream commit 087e1d715bccf25dc0e83294576e416b0386ba20 ]
When caam queue is full (-ENOSPC), caam frees descriptor memory.
crypto-engine checks if retry support is true and h/w queue
is full(-ENOSPC), then requeue the crypto request.
During processing the requested descriptor again, caam gives below error.
(caam_jr 30902000.jr: 40000006: DECO: desc idx 0: Invalid KEY Command).
This patch adds a check to return when caam input ring is full
and retry support is true. so descriptor memory is not freed
and requeued request can be processed again.
Fixes: 2d653936eb2cf ("crypto: caam - enable crypto-engine retry mechanism")
Signed-off-by: Gaurav Jain <[email protected]>
Reviewed-by: Horia Geantă <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/caam/caamalg.c | 6 ++++++
drivers/crypto/caam/caamhash.c | 3 +++
drivers/crypto/caam/caampkc.c | 3 +++
3 files changed, 12 insertions(+)
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index 8697ae53b0633..d3d8bb0a69900 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -1533,6 +1533,9 @@ static int aead_do_one_req(struct crypto_engine *engine, void *areq)
ret = caam_jr_enqueue(ctx->jrdev, desc, aead_crypt_done, req);
+ if (ret == -ENOSPC && engine->retry_support)
+ return ret;
+
if (ret != -EINPROGRESS) {
aead_unmap(ctx->jrdev, rctx->edesc, req);
kfree(rctx->edesc);
@@ -1762,6 +1765,9 @@ static int skcipher_do_one_req(struct crypto_engine *engine, void *areq)
ret = caam_jr_enqueue(ctx->jrdev, desc, skcipher_crypt_done, req);
+ if (ret == -ENOSPC && engine->retry_support)
+ return ret;
+
if (ret != -EINPROGRESS) {
skcipher_unmap(ctx->jrdev, rctx->edesc, req);
kfree(rctx->edesc);
diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c
index e8a6d8bc43b5d..36ef738e4a181 100644
--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -765,6 +765,9 @@ static int ahash_do_one_req(struct crypto_engine *engine, void *areq)
ret = caam_jr_enqueue(jrdev, desc, state->ahash_op_done, req);
+ if (ret == -ENOSPC && engine->retry_support)
+ return ret;
+
if (ret != -EINPROGRESS) {
ahash_unmap(jrdev, state->edesc, req, 0);
kfree(state->edesc);
diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
index bf6275ffc4aad..8867275767101 100644
--- a/drivers/crypto/caam/caampkc.c
+++ b/drivers/crypto/caam/caampkc.c
@@ -380,6 +380,9 @@ static int akcipher_do_one_req(struct crypto_engine *engine, void *areq)
ret = caam_jr_enqueue(jrdev, desc, req_ctx->akcipher_op_done, req);
+ if (ret == -ENOSPC && engine->retry_support)
+ return ret;
+
if (ret != -EINPROGRESS) {
rsa_pub_unmap(jrdev, req_ctx->edesc, req);
rsa_io_unmap(jrdev, req_ctx->edesc, req);
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 527024f7aeb683ce7ef49b07ef7ce9ecf015288d ]
Remove xdp_samples_user.o rule redefinition which generates Makefile
warning and instead override TPROGS_CFLAGS. This seems to work fine when
building inside selftests/bpf.
That was one big head-scratcher before I found that generic
Makefile.target hid this surprising specialization for for xdp_samples_user.o.
Main change is to use actual locally installed libbpf headers.
Also drop printk macro re-definition (not even used!).
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/Makefile | 13 ++++++++++++-
samples/bpf/Makefile.target | 11 -----------
samples/bpf/hbm_kern.h | 2 --
samples/bpf/lwt_len_hist_kern.c | 7 -------
4 files changed, 12 insertions(+), 21 deletions(-)
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 01993b502f6a4..8ac8573946e1a 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -325,7 +325,7 @@ $(BPF_SAMPLES_PATH)/*.c: verify_target_bpf $(LIBBPF)
$(src)/*.c: verify_target_bpf $(LIBBPF)
libbpf_hdrs: $(LIBBPF)
-$(obj)/$(TRACE_HELPERS): | libbpf_hdrs
+$(obj)/$(TRACE_HELPERS) $(obj)/$(CGROUP_HELPERS) $(obj)/$(XDP_SAMPLE): | libbpf_hdrs
.PHONY: libbpf_hdrs
@@ -340,6 +340,17 @@ $(obj)/hbm_out_kern.o: $(src)/hbm.h $(src)/hbm_kern.h
$(obj)/hbm.o: $(src)/hbm.h
$(obj)/hbm_edt_kern.o: $(src)/hbm.h $(src)/hbm_kern.h
+# Override includes for xdp_sample_user.o because $(srctree)/usr/include in
+# TPROGS_CFLAGS causes conflicts
+XDP_SAMPLE_CFLAGS += -Wall -O2 -lm \
+ -I$(src)/../../tools/include \
+ -I$(src)/../../tools/include/uapi \
+ -I$(LIBBPF_INCLUDE) \
+ -I$(src)/../../tools/testing/selftests/bpf
+
+$(obj)/$(XDP_SAMPLE): TPROGS_CFLAGS = $(XDP_SAMPLE_CFLAGS)
+$(obj)/$(XDP_SAMPLE): $(src)/xdp_sample_user.h $(src)/xdp_sample_shared.h
+
-include $(BPF_SAMPLES_PATH)/Makefile.target
VMLINUX_BTF_PATHS ?= $(abspath $(if $(O),$(O)/vmlinux)) \
diff --git a/samples/bpf/Makefile.target b/samples/bpf/Makefile.target
index 5a368affa0386..7621f55e2947d 100644
--- a/samples/bpf/Makefile.target
+++ b/samples/bpf/Makefile.target
@@ -73,14 +73,3 @@ quiet_cmd_tprog-cobjs = CC $@
cmd_tprog-cobjs = $(CC) $(tprogc_flags) -c -o $@ $<
$(tprog-cobjs): $(obj)/%.o: $(src)/%.c FORCE
$(call if_changed_dep,tprog-cobjs)
-
-# Override includes for xdp_sample_user.o because $(srctree)/usr/include in
-# TPROGS_CFLAGS causes conflicts
-XDP_SAMPLE_CFLAGS += -Wall -O2 -lm \
- -I./tools/include \
- -I./tools/include/uapi \
- -I./tools/lib \
- -I./tools/testing/selftests/bpf
-$(obj)/xdp_sample_user.o: $(src)/xdp_sample_user.c \
- $(src)/xdp_sample_user.h $(src)/xdp_sample_shared.h
- $(CC) $(XDP_SAMPLE_CFLAGS) -c -o $@ $<
diff --git a/samples/bpf/hbm_kern.h b/samples/bpf/hbm_kern.h
index 722b3fadb4675..1752a46a2b056 100644
--- a/samples/bpf/hbm_kern.h
+++ b/samples/bpf/hbm_kern.h
@@ -9,8 +9,6 @@
* Include file for sample Host Bandwidth Manager (HBM) BPF programs
*/
#define KBUILD_MODNAME "foo"
-#include <stddef.h>
-#include <stdbool.h>
#include <uapi/linux/bpf.h>
#include <uapi/linux/if_ether.h>
#include <uapi/linux/if_packet.h>
diff --git a/samples/bpf/lwt_len_hist_kern.c b/samples/bpf/lwt_len_hist_kern.c
index 9ed63e10e1709..1fa14c54963a1 100644
--- a/samples/bpf/lwt_len_hist_kern.c
+++ b/samples/bpf/lwt_len_hist_kern.c
@@ -16,13 +16,6 @@
#include <uapi/linux/in.h>
#include <bpf/bpf_helpers.h>
-# define printk(fmt, ...) \
- ({ \
- char ____fmt[] = fmt; \
- bpf_trace_printk(____fmt, sizeof(____fmt), \
- ##__VA_ARGS__); \
- })
-
struct bpf_elf_map {
__u32 type;
__u32 size_key;
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit 41c76690b0990efacd15d35cfb4e77318cd80ebb ]
STM32 CRYP hardware doesn't manage CTR counter bigger than max U32, as
a workaround, at each block the current IV is saved, if the saved IV
lower u32 is 0xFFFFFFFF, the full IV is manually incremented, and set
in hardware.
Fixes: bbb2832620ac ("crypto: stm32 - Fix sparse warnings")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 7389a0536ff02..d13b262b36252 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -163,7 +163,7 @@ struct stm32_cryp {
struct scatter_walk in_walk;
struct scatter_walk out_walk;
- u32 last_ctr[4];
+ __be32 last_ctr[4];
u32 gcm_ctr;
};
@@ -1217,27 +1217,26 @@ static void stm32_cryp_check_ctr_counter(struct stm32_cryp *cryp)
{
u32 cr;
- if (unlikely(cryp->last_ctr[3] == 0xFFFFFFFF)) {
- cryp->last_ctr[3] = 0;
- cryp->last_ctr[2]++;
- if (!cryp->last_ctr[2]) {
- cryp->last_ctr[1]++;
- if (!cryp->last_ctr[1])
- cryp->last_ctr[0]++;
- }
+ if (unlikely(cryp->last_ctr[3] == cpu_to_be32(0xFFFFFFFF))) {
+ /*
+ * In this case, we need to increment manually the ctr counter,
+ * as HW doesn't handle the U32 carry.
+ */
+ crypto_inc((u8 *)cryp->last_ctr, sizeof(cryp->last_ctr));
cr = stm32_cryp_read(cryp, CRYP_CR);
stm32_cryp_write(cryp, CRYP_CR, cr & ~CR_CRYPEN);
- stm32_cryp_hw_write_iv(cryp, (__be32 *)cryp->last_ctr);
+ stm32_cryp_hw_write_iv(cryp, cryp->last_ctr);
stm32_cryp_write(cryp, CRYP_CR, cr);
}
- cryp->last_ctr[0] = stm32_cryp_read(cryp, CRYP_IV0LR);
- cryp->last_ctr[1] = stm32_cryp_read(cryp, CRYP_IV0RR);
- cryp->last_ctr[2] = stm32_cryp_read(cryp, CRYP_IV1LR);
- cryp->last_ctr[3] = stm32_cryp_read(cryp, CRYP_IV1RR);
+ /* The IV registers are BE */
+ cryp->last_ctr[0] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV0LR));
+ cryp->last_ctr[1] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV0RR));
+ cryp->last_ctr[2] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV1LR));
+ cryp->last_ctr[3] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV1RR));
}
static bool stm32_cryp_irq_read_data(struct stm32_cryp *cryp)
--
2.34.1
From: Brian Norris <[email protected]>
[ Upstream commit 1b8bb8919ef81bfc8873d223b9361f1685f2106d ]
Quoting Jia-Ju Bai <[email protected]>:
mwifiex_dequeue_tx_packet()
spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 1432 (Lock A)
mwifiex_send_addba()
spin_lock_bh(&priv->sta_list_spinlock); --> Line 608 (Lock B)
mwifiex_process_sta_tx_pause()
spin_lock_bh(&priv->sta_list_spinlock); --> Line 398 (Lock B)
mwifiex_update_ralist_tx_pause()
spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 941 (Lock A)
Similar report for mwifiex_process_uap_tx_pause().
While the locking expectations in this driver are a bit unclear, the
Fixed commit only intended to protect the sta_ptr, so we can drop the
lock as soon as we're done with it.
IIUC, this deadlock cannot actually happen, because command event
processing (which calls mwifiex_process_sta_tx_pause()) is
sequentialized with TX packet processing (e.g.,
mwifiex_dequeue_tx_packet()) via the main loop (mwifiex_main_process()).
But it's good not to leave this potential issue lurking.
Fixes: f0f7c2275fb9 ("mwifiex: minor cleanups w/ sta_list_spinlock in cfg80211.c")
Cc: Douglas Anderson <[email protected]>
Reported-by: TOTE Robot <[email protected]>
Link: https://lore.kernel.org/linux-wireless/[email protected]/
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/YaV0pllJ5p/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/sta_event.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_event.c b/drivers/net/wireless/marvell/mwifiex/sta_event.c
index 68c63268e2e6b..2b2e6e0166e14 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_event.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_event.c
@@ -365,10 +365,12 @@ static void mwifiex_process_uap_tx_pause(struct mwifiex_private *priv,
sta_ptr = mwifiex_get_sta_entry(priv, tp->peermac);
if (sta_ptr && sta_ptr->tx_pause != tp->tx_pause) {
sta_ptr->tx_pause = tp->tx_pause;
+ spin_unlock_bh(&priv->sta_list_spinlock);
mwifiex_update_ralist_tx_pause(priv, tp->peermac,
tp->tx_pause);
+ } else {
+ spin_unlock_bh(&priv->sta_list_spinlock);
}
- spin_unlock_bh(&priv->sta_list_spinlock);
}
}
@@ -400,11 +402,13 @@ static void mwifiex_process_sta_tx_pause(struct mwifiex_private *priv,
sta_ptr = mwifiex_get_sta_entry(priv, tp->peermac);
if (sta_ptr && sta_ptr->tx_pause != tp->tx_pause) {
sta_ptr->tx_pause = tp->tx_pause;
+ spin_unlock_bh(&priv->sta_list_spinlock);
mwifiex_update_ralist_tx_pause(priv,
tp->peermac,
tp->tx_pause);
+ } else {
+ spin_unlock_bh(&priv->sta_list_spinlock);
}
- spin_unlock_bh(&priv->sta_list_spinlock);
}
}
}
--
2.34.1
From: Wang Hai <[email protected]>
[ Upstream commit 2a7ca7459d905febf519163bd9e3eed894de6bb7 ]
I got a kernel BUG report when doing fault injection test:
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:45!
...
RIP: 0010:__list_del_entry_valid.cold+0x12/0x4d
...
Call Trace:
proto_unregister+0x83/0x220
cmtp_cleanup_sockets+0x37/0x40 [cmtp]
cmtp_exit+0xe/0x1f [cmtp]
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
If cmtp_init_sockets() in cmtp_init() fails, cmtp_init() still returns
success. This will cause a kernel bug when accessing uncreated ctmp
related data when the module exits.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/cmtp/core.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c
index 0a2d78e811cf5..83eb84e8e688f 100644
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -501,9 +501,7 @@ static int __init cmtp_init(void)
{
BT_INFO("CMTP (CAPI Emulation) ver %s", VERSION);
- cmtp_init_sockets();
-
- return 0;
+ return cmtp_init_sockets();
}
static void __exit cmtp_exit(void)
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit 4b898d5cfa4d9a0ad5bc82cb5eafdc092394c6a9 ]
Extra crypto manager auto test were crashing or failling due
to 2 reasons:
- block in a dead loop (dues to issues in cipher end process management)
- crash due to read/write unmapped memory (this crash was also reported
when using openssl afalg engine)
Rework interrupt management, interrupts are masked as soon as they are
no more used: if input buffer is fully consumed, "Input FIFO not full"
interrupt is masked and if output buffer is full, "Output FIFO not
empty" interrupt is masked.
And crypto request finish when input *and* outpout buffer are fully
read/write.
About the crash due to unmapped memory, using scatterwalk_copychunks()
that will map and copy each block fix the issue.
Using this api and copying full block will also fix unaligned data
access, avoid early copy of in/out buffer, and make useless the extra
alignment constraint.
Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Reported-by: Marek Vasut <[email protected]>
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 790 +++++++++---------------------
1 file changed, 243 insertions(+), 547 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 9943836a5c25c..cd57c5bae3ce9 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -37,7 +37,6 @@
/* Mode mask = bits [15..0] */
#define FLG_MODE_MASK GENMASK(15, 0)
/* Bit [31..16] status */
-#define FLG_CCM_PADDED_WA BIT(16)
/* Registers */
#define CRYP_CR 0x00000000
@@ -105,8 +104,6 @@
/* Misc */
#define AES_BLOCK_32 (AES_BLOCK_SIZE / sizeof(u32))
#define GCM_CTR_INIT 2
-#define _walked_in (cryp->in_walk.offset - cryp->in_sg->offset)
-#define _walked_out (cryp->out_walk.offset - cryp->out_sg->offset)
#define CRYP_AUTOSUSPEND_DELAY 50
struct stm32_cryp_caps {
@@ -144,21 +141,11 @@ struct stm32_cryp {
size_t authsize;
size_t hw_blocksize;
- size_t total_in;
- size_t total_in_save;
- size_t total_out;
- size_t total_out_save;
+ size_t payload_in;
+ size_t header_in;
+ size_t payload_out;
- struct scatterlist *in_sg;
struct scatterlist *out_sg;
- struct scatterlist *out_sg_save;
-
- struct scatterlist in_sgl;
- struct scatterlist out_sgl;
- bool sgs_copied;
-
- int in_sg_len;
- int out_sg_len;
struct scatter_walk in_walk;
struct scatter_walk out_walk;
@@ -262,6 +249,7 @@ static inline int stm32_cryp_wait_output(struct stm32_cryp *cryp)
}
static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp);
+static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err);
static struct stm32_cryp *stm32_cryp_find_dev(struct stm32_cryp_ctx *ctx)
{
@@ -283,103 +271,6 @@ static struct stm32_cryp *stm32_cryp_find_dev(struct stm32_cryp_ctx *ctx)
return cryp;
}
-static int stm32_cryp_check_aligned(struct scatterlist *sg, size_t total,
- size_t align)
-{
- int len = 0;
-
- if (!total)
- return 0;
-
- if (!IS_ALIGNED(total, align))
- return -EINVAL;
-
- while (sg) {
- if (!IS_ALIGNED(sg->offset, sizeof(u32)))
- return -EINVAL;
-
- if (!IS_ALIGNED(sg->length, align))
- return -EINVAL;
-
- len += sg->length;
- sg = sg_next(sg);
- }
-
- if (len != total)
- return -EINVAL;
-
- return 0;
-}
-
-static int stm32_cryp_check_io_aligned(struct stm32_cryp *cryp)
-{
- int ret;
-
- ret = stm32_cryp_check_aligned(cryp->in_sg, cryp->total_in,
- cryp->hw_blocksize);
- if (ret)
- return ret;
-
- ret = stm32_cryp_check_aligned(cryp->out_sg, cryp->total_out,
- cryp->hw_blocksize);
-
- return ret;
-}
-
-static void sg_copy_buf(void *buf, struct scatterlist *sg,
- unsigned int start, unsigned int nbytes, int out)
-{
- struct scatter_walk walk;
-
- if (!nbytes)
- return;
-
- scatterwalk_start(&walk, sg);
- scatterwalk_advance(&walk, start);
- scatterwalk_copychunks(buf, &walk, nbytes, out);
- scatterwalk_done(&walk, out, 0);
-}
-
-static int stm32_cryp_copy_sgs(struct stm32_cryp *cryp)
-{
- void *buf_in, *buf_out;
- int pages, total_in, total_out;
-
- if (!stm32_cryp_check_io_aligned(cryp)) {
- cryp->sgs_copied = 0;
- return 0;
- }
-
- total_in = ALIGN(cryp->total_in, cryp->hw_blocksize);
- pages = total_in ? get_order(total_in) : 1;
- buf_in = (void *)__get_free_pages(GFP_ATOMIC, pages);
-
- total_out = ALIGN(cryp->total_out, cryp->hw_blocksize);
- pages = total_out ? get_order(total_out) : 1;
- buf_out = (void *)__get_free_pages(GFP_ATOMIC, pages);
-
- if (!buf_in || !buf_out) {
- dev_err(cryp->dev, "Can't allocate pages when unaligned\n");
- cryp->sgs_copied = 0;
- return -EFAULT;
- }
-
- sg_copy_buf(buf_in, cryp->in_sg, 0, cryp->total_in, 0);
-
- sg_init_one(&cryp->in_sgl, buf_in, total_in);
- cryp->in_sg = &cryp->in_sgl;
- cryp->in_sg_len = 1;
-
- sg_init_one(&cryp->out_sgl, buf_out, total_out);
- cryp->out_sg_save = cryp->out_sg;
- cryp->out_sg = &cryp->out_sgl;
- cryp->out_sg_len = 1;
-
- cryp->sgs_copied = 1;
-
- return 0;
-}
-
static void stm32_cryp_hw_write_iv(struct stm32_cryp *cryp, __be32 *iv)
{
if (!iv)
@@ -481,16 +372,99 @@ static int stm32_cryp_gcm_init(struct stm32_cryp *cryp, u32 cfg)
/* Wait for end of processing */
ret = stm32_cryp_wait_enable(cryp);
- if (ret)
+ if (ret) {
dev_err(cryp->dev, "Timeout (gcm init)\n");
+ return ret;
+ }
- return ret;
+ /* Prepare next phase */
+ if (cryp->areq->assoclen) {
+ cfg |= CR_PH_HEADER;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+ } else if (stm32_cryp_get_input_text_len(cryp)) {
+ cfg |= CR_PH_PAYLOAD;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+ }
+
+ return 0;
+}
+
+static void stm32_crypt_gcmccm_end_header(struct stm32_cryp *cryp)
+{
+ u32 cfg;
+ int err;
+
+ /* Check if whole header written */
+ if (!cryp->header_in) {
+ /* Wait for completion */
+ err = stm32_cryp_wait_busy(cryp);
+ if (err) {
+ dev_err(cryp->dev, "Timeout (gcm/ccm header)\n");
+ stm32_cryp_write(cryp, CRYP_IMSCR, 0);
+ stm32_cryp_finish_req(cryp, err);
+ return;
+ }
+
+ if (stm32_cryp_get_input_text_len(cryp)) {
+ /* Phase 3 : payload */
+ cfg = stm32_cryp_read(cryp, CRYP_CR);
+ cfg &= ~CR_CRYPEN;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+
+ cfg &= ~CR_PH_MASK;
+ cfg |= CR_PH_PAYLOAD | CR_CRYPEN;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+ } else {
+ /*
+ * Phase 4 : tag.
+ * Nothing to read, nothing to write, caller have to
+ * end request
+ */
+ }
+ }
+}
+
+static void stm32_cryp_write_ccm_first_header(struct stm32_cryp *cryp)
+{
+ unsigned int i;
+ size_t written;
+ size_t len;
+ u32 alen = cryp->areq->assoclen;
+ u32 block[AES_BLOCK_32] = {0};
+ u8 *b8 = (u8 *)block;
+
+ if (alen <= 65280) {
+ /* Write first u32 of B1 */
+ b8[0] = (alen >> 8) & 0xFF;
+ b8[1] = alen & 0xFF;
+ len = 2;
+ } else {
+ /* Build the two first u32 of B1 */
+ b8[0] = 0xFF;
+ b8[1] = 0xFE;
+ b8[2] = (alen & 0xFF000000) >> 24;
+ b8[3] = (alen & 0x00FF0000) >> 16;
+ b8[4] = (alen & 0x0000FF00) >> 8;
+ b8[5] = alen & 0x000000FF;
+ len = 6;
+ }
+
+ written = min_t(size_t, AES_BLOCK_SIZE - len, alen);
+
+ scatterwalk_copychunks((char *)block + len, &cryp->in_walk, written, 0);
+ for (i = 0; i < AES_BLOCK_32; i++)
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
+
+ cryp->header_in -= written;
+
+ stm32_crypt_gcmccm_end_header(cryp);
}
static int stm32_cryp_ccm_init(struct stm32_cryp *cryp, u32 cfg)
{
int ret;
- u8 iv[AES_BLOCK_SIZE], b0[AES_BLOCK_SIZE];
+ u32 iv_32[AES_BLOCK_32], b0_32[AES_BLOCK_32];
+ u8 *iv = (u8 *)iv_32, *b0 = (u8 *)b0_32;
__be32 *bd;
u32 *d;
unsigned int i, textlen;
@@ -531,17 +505,30 @@ static int stm32_cryp_ccm_init(struct stm32_cryp *cryp, u32 cfg)
/* Wait for end of processing */
ret = stm32_cryp_wait_enable(cryp);
- if (ret)
+ if (ret) {
dev_err(cryp->dev, "Timeout (ccm init)\n");
+ return ret;
+ }
- return ret;
+ /* Prepare next phase */
+ if (cryp->areq->assoclen) {
+ cfg |= CR_PH_HEADER | CR_CRYPEN;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+
+ /* Write first (special) block (may move to next phase [payload]) */
+ stm32_cryp_write_ccm_first_header(cryp);
+ } else if (stm32_cryp_get_input_text_len(cryp)) {
+ cfg |= CR_PH_PAYLOAD;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+ }
+
+ return 0;
}
static int stm32_cryp_hw_init(struct stm32_cryp *cryp)
{
int ret;
u32 cfg, hw_mode;
-
pm_runtime_resume_and_get(cryp->dev);
/* Disable interrupt */
@@ -605,16 +592,6 @@ static int stm32_cryp_hw_init(struct stm32_cryp *cryp)
if (ret)
return ret;
- /* Phase 2 : header (authenticated data) */
- if (cryp->areq->assoclen) {
- cfg |= CR_PH_HEADER;
- } else if (stm32_cryp_get_input_text_len(cryp)) {
- cfg |= CR_PH_PAYLOAD;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
- } else {
- cfg |= CR_PH_INIT;
- }
-
break;
case CR_DES_CBC:
@@ -633,8 +610,6 @@ static int stm32_cryp_hw_init(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_CR, cfg);
- cryp->flags &= ~FLG_CCM_PADDED_WA;
-
return 0;
}
@@ -647,25 +622,6 @@ static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err)
if (!err && (!(is_gcm(cryp) || is_ccm(cryp) || is_ecb(cryp))))
stm32_cryp_get_iv(cryp);
- if (cryp->sgs_copied) {
- void *buf_in, *buf_out;
- int pages, len;
-
- buf_in = sg_virt(&cryp->in_sgl);
- buf_out = sg_virt(&cryp->out_sgl);
-
- sg_copy_buf(buf_out, cryp->out_sg_save, 0,
- cryp->total_out_save, 1);
-
- len = ALIGN(cryp->total_in_save, cryp->hw_blocksize);
- pages = len ? get_order(len) : 1;
- free_pages((unsigned long)buf_in, pages);
-
- len = ALIGN(cryp->total_out_save, cryp->hw_blocksize);
- pages = len ? get_order(len) : 1;
- free_pages((unsigned long)buf_out, pages);
- }
-
pm_runtime_mark_last_busy(cryp->dev);
pm_runtime_put_autosuspend(cryp->dev);
@@ -1029,6 +985,7 @@ static int stm32_cryp_prepare_req(struct skcipher_request *req,
struct stm32_cryp_ctx *ctx;
struct stm32_cryp *cryp;
struct stm32_cryp_reqctx *rctx;
+ struct scatterlist *in_sg;
int ret;
if (!req && !areq)
@@ -1054,76 +1011,55 @@ static int stm32_cryp_prepare_req(struct skcipher_request *req,
if (req) {
cryp->req = req;
cryp->areq = NULL;
- cryp->total_in = req->cryptlen;
- cryp->total_out = cryp->total_in;
+ cryp->header_in = 0;
+ cryp->payload_in = req->cryptlen;
+ cryp->payload_out = req->cryptlen;
+ cryp->authsize = 0;
} else {
/*
* Length of input and output data:
* Encryption case:
- * INPUT = AssocData || PlainText
+ * INPUT = AssocData || PlainText
* <- assoclen -> <- cryptlen ->
- * <------- total_in ----------->
*
- * OUTPUT = AssocData || CipherText || AuthTag
- * <- assoclen -> <- cryptlen -> <- authsize ->
- * <---------------- total_out ----------------->
+ * OUTPUT = AssocData || CipherText || AuthTag
+ * <- assoclen -> <-- cryptlen --> <- authsize ->
*
* Decryption case:
- * INPUT = AssocData || CipherText || AuthTag
- * <- assoclen -> <--------- cryptlen --------->
- * <- authsize ->
- * <---------------- total_in ------------------>
+ * INPUT = AssocData || CipherTex || AuthTag
+ * <- assoclen ---> <---------- cryptlen ---------->
*
- * OUTPUT = AssocData || PlainText
- * <- assoclen -> <- crypten - authsize ->
- * <---------- total_out ----------------->
+ * OUTPUT = AssocData || PlainText
+ * <- assoclen -> <- cryptlen - authsize ->
*/
cryp->areq = areq;
cryp->req = NULL;
cryp->authsize = crypto_aead_authsize(crypto_aead_reqtfm(areq));
- cryp->total_in = areq->assoclen + areq->cryptlen;
- if (is_encrypt(cryp))
- /* Append auth tag to output */
- cryp->total_out = cryp->total_in + cryp->authsize;
- else
- /* No auth tag in output */
- cryp->total_out = cryp->total_in - cryp->authsize;
+ if (is_encrypt(cryp)) {
+ cryp->payload_in = areq->cryptlen;
+ cryp->header_in = areq->assoclen;
+ cryp->payload_out = areq->cryptlen;
+ } else {
+ cryp->payload_in = areq->cryptlen - cryp->authsize;
+ cryp->header_in = areq->assoclen;
+ cryp->payload_out = cryp->payload_in;
+ }
}
- cryp->total_in_save = cryp->total_in;
- cryp->total_out_save = cryp->total_out;
+ in_sg = req ? req->src : areq->src;
+ scatterwalk_start(&cryp->in_walk, in_sg);
- cryp->in_sg = req ? req->src : areq->src;
cryp->out_sg = req ? req->dst : areq->dst;
- cryp->out_sg_save = cryp->out_sg;
-
- cryp->in_sg_len = sg_nents_for_len(cryp->in_sg, cryp->total_in);
- if (cryp->in_sg_len < 0) {
- dev_err(cryp->dev, "Cannot get in_sg_len\n");
- ret = cryp->in_sg_len;
- return ret;
- }
-
- cryp->out_sg_len = sg_nents_for_len(cryp->out_sg, cryp->total_out);
- if (cryp->out_sg_len < 0) {
- dev_err(cryp->dev, "Cannot get out_sg_len\n");
- ret = cryp->out_sg_len;
- return ret;
- }
-
- ret = stm32_cryp_copy_sgs(cryp);
- if (ret)
- return ret;
-
- scatterwalk_start(&cryp->in_walk, cryp->in_sg);
scatterwalk_start(&cryp->out_walk, cryp->out_sg);
if (is_gcm(cryp) || is_ccm(cryp)) {
/* In output, jump after assoc data */
- scatterwalk_advance(&cryp->out_walk, cryp->areq->assoclen);
- cryp->total_out -= cryp->areq->assoclen;
+ scatterwalk_copychunks(NULL, &cryp->out_walk, cryp->areq->assoclen, 2);
}
+ if (is_ctr(cryp))
+ memset(cryp->last_ctr, 0, sizeof(cryp->last_ctr));
+
ret = stm32_cryp_hw_init(cryp);
return ret;
}
@@ -1171,8 +1107,7 @@ static int stm32_cryp_aead_one_req(struct crypto_engine *engine, void *areq)
if (!cryp)
return -ENODEV;
- if (unlikely(!cryp->areq->assoclen &&
- !stm32_cryp_get_input_text_len(cryp))) {
+ if (unlikely(!cryp->payload_in && !cryp->header_in)) {
/* No input data to process: get tag and finish */
stm32_cryp_finish_req(cryp, 0);
return 0;
@@ -1181,43 +1116,10 @@ static int stm32_cryp_aead_one_req(struct crypto_engine *engine, void *areq)
return stm32_cryp_cpu_start(cryp);
}
-static u32 *stm32_cryp_next_out(struct stm32_cryp *cryp, u32 *dst,
- unsigned int n)
-{
- scatterwalk_advance(&cryp->out_walk, n);
-
- if (unlikely(cryp->out_sg->length == _walked_out)) {
- cryp->out_sg = sg_next(cryp->out_sg);
- if (cryp->out_sg) {
- scatterwalk_start(&cryp->out_walk, cryp->out_sg);
- return (sg_virt(cryp->out_sg) + _walked_out);
- }
- }
-
- return (u32 *)((u8 *)dst + n);
-}
-
-static u32 *stm32_cryp_next_in(struct stm32_cryp *cryp, u32 *src,
- unsigned int n)
-{
- scatterwalk_advance(&cryp->in_walk, n);
-
- if (unlikely(cryp->in_sg->length == _walked_in)) {
- cryp->in_sg = sg_next(cryp->in_sg);
- if (cryp->in_sg) {
- scatterwalk_start(&cryp->in_walk, cryp->in_sg);
- return (sg_virt(cryp->in_sg) + _walked_in);
- }
- }
-
- return (u32 *)((u8 *)src + n);
-}
-
static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp)
{
- u32 cfg, size_bit, *dst, d32;
- u8 *d8;
- unsigned int i, j;
+ u32 cfg, size_bit;
+ unsigned int i;
int ret = 0;
/* Update Config */
@@ -1240,7 +1142,7 @@ static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_DIN, size_bit);
size_bit = is_encrypt(cryp) ? cryp->areq->cryptlen :
- cryp->areq->cryptlen - AES_BLOCK_SIZE;
+ cryp->areq->cryptlen - cryp->authsize;
size_bit *= 8;
if (cryp->caps->swap_final)
size_bit = (__force u32)cpu_to_be32(size_bit);
@@ -1249,11 +1151,9 @@ static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_DIN, size_bit);
} else {
/* CCM: write CTR0 */
- u8 iv[AES_BLOCK_SIZE];
- u32 *iv32 = (u32 *)iv;
- __be32 *biv;
-
- biv = (void *)iv;
+ u32 iv32[AES_BLOCK_32];
+ u8 *iv = (u8 *)iv32;
+ __be32 *biv = (__be32 *)iv32;
memcpy(iv, cryp->areq->iv, AES_BLOCK_SIZE);
memset(iv + AES_BLOCK_SIZE - 1 - iv[0], 0, iv[0] + 1);
@@ -1275,39 +1175,18 @@ static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp)
}
if (is_encrypt(cryp)) {
+ u32 out_tag[AES_BLOCK_32];
+
/* Get and write tag */
- dst = sg_virt(cryp->out_sg) + _walked_out;
+ for (i = 0; i < AES_BLOCK_32; i++)
+ out_tag[i] = stm32_cryp_read(cryp, CRYP_DOUT);
- for (i = 0; i < AES_BLOCK_32; i++) {
- if (cryp->total_out >= sizeof(u32)) {
- /* Read a full u32 */
- *dst = stm32_cryp_read(cryp, CRYP_DOUT);
-
- dst = stm32_cryp_next_out(cryp, dst,
- sizeof(u32));
- cryp->total_out -= sizeof(u32);
- } else if (!cryp->total_out) {
- /* Empty fifo out (data from input padding) */
- stm32_cryp_read(cryp, CRYP_DOUT);
- } else {
- /* Read less than an u32 */
- d32 = stm32_cryp_read(cryp, CRYP_DOUT);
- d8 = (u8 *)&d32;
-
- for (j = 0; j < cryp->total_out; j++) {
- *((u8 *)dst) = *(d8++);
- dst = stm32_cryp_next_out(cryp, dst, 1);
- }
- cryp->total_out = 0;
- }
- }
+ scatterwalk_copychunks(out_tag, &cryp->out_walk, cryp->authsize, 1);
} else {
/* Get and check tag */
u32 in_tag[AES_BLOCK_32], out_tag[AES_BLOCK_32];
- scatterwalk_map_and_copy(in_tag, cryp->in_sg,
- cryp->total_in_save - cryp->authsize,
- cryp->authsize, 0);
+ scatterwalk_copychunks(in_tag, &cryp->in_walk, cryp->authsize, 0);
for (i = 0; i < AES_BLOCK_32; i++)
out_tag[i] = stm32_cryp_read(cryp, CRYP_DOUT);
@@ -1349,92 +1228,37 @@ static void stm32_cryp_check_ctr_counter(struct stm32_cryp *cryp)
cryp->last_ctr[3] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV1RR));
}
-static bool stm32_cryp_irq_read_data(struct stm32_cryp *cryp)
+static void stm32_cryp_irq_read_data(struct stm32_cryp *cryp)
{
- unsigned int i, j;
- u32 d32, *dst;
- u8 *d8;
- size_t tag_size;
-
- /* Do no read tag now (if any) */
- if (is_encrypt(cryp) && (is_gcm(cryp) || is_ccm(cryp)))
- tag_size = cryp->authsize;
- else
- tag_size = 0;
-
- dst = sg_virt(cryp->out_sg) + _walked_out;
-
- for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++) {
- if (likely(cryp->total_out - tag_size >= sizeof(u32))) {
- /* Read a full u32 */
- *dst = stm32_cryp_read(cryp, CRYP_DOUT);
+ unsigned int i;
+ u32 block[AES_BLOCK_32];
- dst = stm32_cryp_next_out(cryp, dst, sizeof(u32));
- cryp->total_out -= sizeof(u32);
- } else if (cryp->total_out == tag_size) {
- /* Empty fifo out (data from input padding) */
- d32 = stm32_cryp_read(cryp, CRYP_DOUT);
- } else {
- /* Read less than an u32 */
- d32 = stm32_cryp_read(cryp, CRYP_DOUT);
- d8 = (u8 *)&d32;
-
- for (j = 0; j < cryp->total_out - tag_size; j++) {
- *((u8 *)dst) = *(d8++);
- dst = stm32_cryp_next_out(cryp, dst, 1);
- }
- cryp->total_out = tag_size;
- }
- }
+ for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++)
+ block[i] = stm32_cryp_read(cryp, CRYP_DOUT);
- return !(cryp->total_out - tag_size) || !cryp->total_in;
+ scatterwalk_copychunks(block, &cryp->out_walk, min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out), 1);
+ cryp->payload_out -= min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out);
}
static void stm32_cryp_irq_write_block(struct stm32_cryp *cryp)
{
- unsigned int i, j;
- u32 *src;
- u8 d8[4];
- size_t tag_size;
-
- /* Do no write tag (if any) */
- if (is_decrypt(cryp) && (is_gcm(cryp) || is_ccm(cryp)))
- tag_size = cryp->authsize;
- else
- tag_size = 0;
-
- src = sg_virt(cryp->in_sg) + _walked_in;
+ unsigned int i;
+ u32 block[AES_BLOCK_32] = {0};
- for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++) {
- if (likely(cryp->total_in - tag_size >= sizeof(u32))) {
- /* Write a full u32 */
- stm32_cryp_write(cryp, CRYP_DIN, *src);
+ scatterwalk_copychunks(block, &cryp->in_walk, min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_in), 0);
+ for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++)
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
- src = stm32_cryp_next_in(cryp, src, sizeof(u32));
- cryp->total_in -= sizeof(u32);
- } else if (cryp->total_in == tag_size) {
- /* Write padding data */
- stm32_cryp_write(cryp, CRYP_DIN, 0);
- } else {
- /* Write less than an u32 */
- memset(d8, 0, sizeof(u32));
- for (j = 0; j < cryp->total_in - tag_size; j++) {
- d8[j] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
- }
-
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
- cryp->total_in = tag_size;
- }
- }
+ cryp->payload_in -= min_t(size_t, cryp->hw_blocksize, cryp->payload_in);
}
static void stm32_cryp_irq_write_gcm_padded_data(struct stm32_cryp *cryp)
{
int err;
- u32 cfg, tmp[AES_BLOCK_32];
- size_t total_in_ori = cryp->total_in;
- struct scatterlist *out_sg_ori = cryp->out_sg;
+ u32 cfg, block[AES_BLOCK_32] = {0};
unsigned int i;
/* 'Special workaround' procedure described in the datasheet */
@@ -1459,18 +1283,25 @@ static void stm32_cryp_irq_write_gcm_padded_data(struct stm32_cryp *cryp)
/* b) pad and write the last block */
stm32_cryp_irq_write_block(cryp);
- cryp->total_in = total_in_ori;
+ /* wait end of process */
err = stm32_cryp_wait_output(cryp);
if (err) {
- dev_err(cryp->dev, "Timeout (write gcm header)\n");
+ dev_err(cryp->dev, "Timeout (write gcm last data)\n");
return stm32_cryp_finish_req(cryp, err);
}
/* c) get and store encrypted data */
- stm32_cryp_irq_read_data(cryp);
- scatterwalk_map_and_copy(tmp, out_sg_ori,
- cryp->total_in_save - total_in_ori,
- total_in_ori, 0);
+ /*
+ * Same code as stm32_cryp_irq_read_data(), but we want to store
+ * block value
+ */
+ for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++)
+ block[i] = stm32_cryp_read(cryp, CRYP_DOUT);
+
+ scatterwalk_copychunks(block, &cryp->out_walk, min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out), 1);
+ cryp->payload_out -= min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out);
/* d) change mode back to AES GCM */
cfg &= ~CR_ALGO_MASK;
@@ -1483,19 +1314,13 @@ static void stm32_cryp_irq_write_gcm_padded_data(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_CR, cfg);
/* f) write padded data */
- for (i = 0; i < AES_BLOCK_32; i++) {
- if (cryp->total_in)
- stm32_cryp_write(cryp, CRYP_DIN, tmp[i]);
- else
- stm32_cryp_write(cryp, CRYP_DIN, 0);
-
- cryp->total_in -= min_t(size_t, sizeof(u32), cryp->total_in);
- }
+ for (i = 0; i < AES_BLOCK_32; i++)
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
/* g) Empty fifo out */
err = stm32_cryp_wait_output(cryp);
if (err) {
- dev_err(cryp->dev, "Timeout (write gcm header)\n");
+ dev_err(cryp->dev, "Timeout (write gcm padded data)\n");
return stm32_cryp_finish_req(cryp, err);
}
@@ -1508,16 +1333,14 @@ static void stm32_cryp_irq_write_gcm_padded_data(struct stm32_cryp *cryp)
static void stm32_cryp_irq_set_npblb(struct stm32_cryp *cryp)
{
- u32 cfg, payload_bytes;
+ u32 cfg;
/* disable ip, set NPBLB and reneable ip */
cfg = stm32_cryp_read(cryp, CRYP_CR);
cfg &= ~CR_CRYPEN;
stm32_cryp_write(cryp, CRYP_CR, cfg);
- payload_bytes = is_decrypt(cryp) ? cryp->total_in - cryp->authsize :
- cryp->total_in;
- cfg |= (cryp->hw_blocksize - payload_bytes) << CR_NBPBL_SHIFT;
+ cfg |= (cryp->hw_blocksize - cryp->payload_in) << CR_NBPBL_SHIFT;
cfg |= CR_CRYPEN;
stm32_cryp_write(cryp, CRYP_CR, cfg);
}
@@ -1526,13 +1349,11 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
{
int err = 0;
u32 cfg, iv1tmp;
- u32 cstmp1[AES_BLOCK_32], cstmp2[AES_BLOCK_32], tmp[AES_BLOCK_32];
- size_t last_total_out, total_in_ori = cryp->total_in;
- struct scatterlist *out_sg_ori = cryp->out_sg;
+ u32 cstmp1[AES_BLOCK_32], cstmp2[AES_BLOCK_32];
+ u32 block[AES_BLOCK_32] = {0};
unsigned int i;
/* 'Special workaround' procedure described in the datasheet */
- cryp->flags |= FLG_CCM_PADDED_WA;
/* a) disable ip */
stm32_cryp_write(cryp, CRYP_IMSCR, 0);
@@ -1562,7 +1383,7 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
/* b) pad and write the last block */
stm32_cryp_irq_write_block(cryp);
- cryp->total_in = total_in_ori;
+ /* wait end of process */
err = stm32_cryp_wait_output(cryp);
if (err) {
dev_err(cryp->dev, "Timeout (wite ccm padded data)\n");
@@ -1570,13 +1391,16 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
}
/* c) get and store decrypted data */
- last_total_out = cryp->total_out;
- stm32_cryp_irq_read_data(cryp);
+ /*
+ * Same code as stm32_cryp_irq_read_data(), but we want to store
+ * block value
+ */
+ for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++)
+ block[i] = stm32_cryp_read(cryp, CRYP_DOUT);
- memset(tmp, 0, sizeof(tmp));
- scatterwalk_map_and_copy(tmp, out_sg_ori,
- cryp->total_out_save - last_total_out,
- last_total_out, 0);
+ scatterwalk_copychunks(block, &cryp->out_walk, min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out), 1);
+ cryp->payload_out -= min_t(size_t, cryp->hw_blocksize, cryp->payload_out);
/* d) Load again CRYP_CSGCMCCMxR */
for (i = 0; i < ARRAY_SIZE(cstmp2); i++)
@@ -1593,10 +1417,10 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_CR, cfg);
/* g) XOR and write padded data */
- for (i = 0; i < ARRAY_SIZE(tmp); i++) {
- tmp[i] ^= cstmp1[i];
- tmp[i] ^= cstmp2[i];
- stm32_cryp_write(cryp, CRYP_DIN, tmp[i]);
+ for (i = 0; i < ARRAY_SIZE(block); i++) {
+ block[i] ^= cstmp1[i];
+ block[i] ^= cstmp2[i];
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
}
/* h) wait for completion */
@@ -1610,30 +1434,34 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
static void stm32_cryp_irq_write_data(struct stm32_cryp *cryp)
{
- if (unlikely(!cryp->total_in)) {
+ if (unlikely(!cryp->payload_in)) {
dev_warn(cryp->dev, "No more data to process\n");
return;
}
- if (unlikely(cryp->total_in < AES_BLOCK_SIZE &&
+ if (unlikely(cryp->payload_in < AES_BLOCK_SIZE &&
(stm32_cryp_get_hw_mode(cryp) == CR_AES_GCM) &&
is_encrypt(cryp))) {
/* Padding for AES GCM encryption */
- if (cryp->caps->padding_wa)
+ if (cryp->caps->padding_wa) {
/* Special case 1 */
- return stm32_cryp_irq_write_gcm_padded_data(cryp);
+ stm32_cryp_irq_write_gcm_padded_data(cryp);
+ return;
+ }
/* Setting padding bytes (NBBLB) */
stm32_cryp_irq_set_npblb(cryp);
}
- if (unlikely((cryp->total_in - cryp->authsize < AES_BLOCK_SIZE) &&
+ if (unlikely((cryp->payload_in < AES_BLOCK_SIZE) &&
(stm32_cryp_get_hw_mode(cryp) == CR_AES_CCM) &&
is_decrypt(cryp))) {
/* Padding for AES CCM decryption */
- if (cryp->caps->padding_wa)
+ if (cryp->caps->padding_wa) {
/* Special case 2 */
- return stm32_cryp_irq_write_ccm_padded_data(cryp);
+ stm32_cryp_irq_write_ccm_padded_data(cryp);
+ return;
+ }
/* Setting padding bytes (NBBLB) */
stm32_cryp_irq_set_npblb(cryp);
@@ -1645,192 +1473,60 @@ static void stm32_cryp_irq_write_data(struct stm32_cryp *cryp)
stm32_cryp_irq_write_block(cryp);
}
-static void stm32_cryp_irq_write_gcm_header(struct stm32_cryp *cryp)
+static void stm32_cryp_irq_write_gcmccm_header(struct stm32_cryp *cryp)
{
- int err;
- unsigned int i, j;
- u32 cfg, *src;
-
- src = sg_virt(cryp->in_sg) + _walked_in;
-
- for (i = 0; i < AES_BLOCK_32; i++) {
- stm32_cryp_write(cryp, CRYP_DIN, *src);
-
- src = stm32_cryp_next_in(cryp, src, sizeof(u32));
- cryp->total_in -= min_t(size_t, sizeof(u32), cryp->total_in);
-
- /* Check if whole header written */
- if ((cryp->total_in_save - cryp->total_in) ==
- cryp->areq->assoclen) {
- /* Write padding if needed */
- for (j = i + 1; j < AES_BLOCK_32; j++)
- stm32_cryp_write(cryp, CRYP_DIN, 0);
-
- /* Wait for completion */
- err = stm32_cryp_wait_busy(cryp);
- if (err) {
- dev_err(cryp->dev, "Timeout (gcm header)\n");
- return stm32_cryp_finish_req(cryp, err);
- }
-
- if (stm32_cryp_get_input_text_len(cryp)) {
- /* Phase 3 : payload */
- cfg = stm32_cryp_read(cryp, CRYP_CR);
- cfg &= ~CR_CRYPEN;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
-
- cfg &= ~CR_PH_MASK;
- cfg |= CR_PH_PAYLOAD;
- cfg |= CR_CRYPEN;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
- } else {
- /* Phase 4 : tag */
- stm32_cryp_write(cryp, CRYP_IMSCR, 0);
- stm32_cryp_finish_req(cryp, 0);
- }
-
- break;
- }
-
- if (!cryp->total_in)
- break;
- }
-}
+ unsigned int i;
+ u32 block[AES_BLOCK_32] = {0};
+ size_t written;
-static void stm32_cryp_irq_write_ccm_header(struct stm32_cryp *cryp)
-{
- int err;
- unsigned int i = 0, j, k;
- u32 alen, cfg, *src;
- u8 d8[4];
-
- src = sg_virt(cryp->in_sg) + _walked_in;
- alen = cryp->areq->assoclen;
-
- if (!_walked_in) {
- if (cryp->areq->assoclen <= 65280) {
- /* Write first u32 of B1 */
- d8[0] = (alen >> 8) & 0xFF;
- d8[1] = alen & 0xFF;
- d8[2] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
- d8[3] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
-
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
- i++;
-
- cryp->total_in -= min_t(size_t, 2, cryp->total_in);
- } else {
- /* Build the two first u32 of B1 */
- d8[0] = 0xFF;
- d8[1] = 0xFE;
- d8[2] = alen & 0xFF000000;
- d8[3] = alen & 0x00FF0000;
-
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
- i++;
-
- d8[0] = alen & 0x0000FF00;
- d8[1] = alen & 0x000000FF;
- d8[2] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
- d8[3] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
-
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
- i++;
-
- cryp->total_in -= min_t(size_t, 2, cryp->total_in);
- }
- }
+ written = min_t(size_t, AES_BLOCK_SIZE, cryp->header_in);
- /* Write next u32 */
- for (; i < AES_BLOCK_32; i++) {
- /* Build an u32 */
- memset(d8, 0, sizeof(u32));
- for (k = 0; k < sizeof(u32); k++) {
- d8[k] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
-
- cryp->total_in -= min_t(size_t, 1, cryp->total_in);
- if ((cryp->total_in_save - cryp->total_in) == alen)
- break;
- }
+ scatterwalk_copychunks(block, &cryp->in_walk, written, 0);
+ for (i = 0; i < AES_BLOCK_32; i++)
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
-
- if ((cryp->total_in_save - cryp->total_in) == alen) {
- /* Write padding if needed */
- for (j = i + 1; j < AES_BLOCK_32; j++)
- stm32_cryp_write(cryp, CRYP_DIN, 0);
-
- /* Wait for completion */
- err = stm32_cryp_wait_busy(cryp);
- if (err) {
- dev_err(cryp->dev, "Timeout (ccm header)\n");
- return stm32_cryp_finish_req(cryp, err);
- }
-
- if (stm32_cryp_get_input_text_len(cryp)) {
- /* Phase 3 : payload */
- cfg = stm32_cryp_read(cryp, CRYP_CR);
- cfg &= ~CR_CRYPEN;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
-
- cfg &= ~CR_PH_MASK;
- cfg |= CR_PH_PAYLOAD;
- cfg |= CR_CRYPEN;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
- } else {
- /* Phase 4 : tag */
- stm32_cryp_write(cryp, CRYP_IMSCR, 0);
- stm32_cryp_finish_req(cryp, 0);
- }
+ cryp->header_in -= written;
- break;
- }
- }
+ stm32_crypt_gcmccm_end_header(cryp);
}
static irqreturn_t stm32_cryp_irq_thread(int irq, void *arg)
{
struct stm32_cryp *cryp = arg;
u32 ph;
+ u32 it_mask = stm32_cryp_read(cryp, CRYP_IMSCR);
if (cryp->irq_status & MISR_OUT)
/* Output FIFO IRQ: read data */
- if (unlikely(stm32_cryp_irq_read_data(cryp))) {
- /* All bytes processed, finish */
- stm32_cryp_write(cryp, CRYP_IMSCR, 0);
- stm32_cryp_finish_req(cryp, 0);
- return IRQ_HANDLED;
- }
+ stm32_cryp_irq_read_data(cryp);
if (cryp->irq_status & MISR_IN) {
- if (is_gcm(cryp)) {
- ph = stm32_cryp_read(cryp, CRYP_CR) & CR_PH_MASK;
- if (unlikely(ph == CR_PH_HEADER))
- /* Write Header */
- stm32_cryp_irq_write_gcm_header(cryp);
- else
- /* Input FIFO IRQ: write data */
- stm32_cryp_irq_write_data(cryp);
- cryp->gcm_ctr++;
- } else if (is_ccm(cryp)) {
+ if (is_gcm(cryp) || is_ccm(cryp)) {
ph = stm32_cryp_read(cryp, CRYP_CR) & CR_PH_MASK;
if (unlikely(ph == CR_PH_HEADER))
/* Write Header */
- stm32_cryp_irq_write_ccm_header(cryp);
+ stm32_cryp_irq_write_gcmccm_header(cryp);
else
/* Input FIFO IRQ: write data */
stm32_cryp_irq_write_data(cryp);
+ if (is_gcm(cryp))
+ cryp->gcm_ctr++;
} else {
/* Input FIFO IRQ: write data */
stm32_cryp_irq_write_data(cryp);
}
}
+ /* Mask useless interrupts */
+ if (!cryp->payload_in && !cryp->header_in)
+ it_mask &= ~IMSCR_IN;
+ if (!cryp->payload_out)
+ it_mask &= ~IMSCR_OUT;
+ stm32_cryp_write(cryp, CRYP_IMSCR, it_mask);
+
+ if (!cryp->payload_in && !cryp->header_in && !cryp->payload_out)
+ stm32_cryp_finish_req(cryp, 0);
+
return IRQ_HANDLED;
}
@@ -1851,7 +1547,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = AES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1868,7 +1564,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = AES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1886,7 +1582,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = 1,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1904,7 +1600,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1921,7 +1617,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1939,7 +1635,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1956,7 +1652,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1986,7 +1682,7 @@ static struct aead_alg aead_algs[] = {
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = 1,
.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .cra_alignmask = 0xf,
+ .cra_alignmask = 0,
.cra_module = THIS_MODULE,
},
},
@@ -2006,7 +1702,7 @@ static struct aead_alg aead_algs[] = {
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = 1,
.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .cra_alignmask = 0xf,
+ .cra_alignmask = 0,
.cra_module = THIS_MODULE,
},
},
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit bbe33504d4a7fdab9011211e55e262c869b3f6cc ]
Rename set_signals() as there's at least one driver that
uses the same name and can now be built on UM due to PCI
support, and thus we can get symbol conflicts.
Also rename set_signals_trace() to be consistent.
Reported-by: kernel test robot <[email protected]>
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/include/asm/irqflags.h | 4 ++--
arch/um/include/shared/longjmp.h | 2 +-
arch/um/include/shared/os.h | 4 ++--
arch/um/kernel/ksyms.c | 2 +-
arch/um/os-Linux/sigio.c | 6 +++---
arch/um/os-Linux/signal.c | 8 ++++----
6 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/um/include/asm/irqflags.h b/arch/um/include/asm/irqflags.h
index dab5744e9253d..1e69ef5bc35e0 100644
--- a/arch/um/include/asm/irqflags.h
+++ b/arch/um/include/asm/irqflags.h
@@ -3,7 +3,7 @@
#define __UM_IRQFLAGS_H
extern int signals_enabled;
-int set_signals(int enable);
+int um_set_signals(int enable);
void block_signals(void);
void unblock_signals(void);
@@ -16,7 +16,7 @@ static inline unsigned long arch_local_save_flags(void)
#define arch_local_irq_restore arch_local_irq_restore
static inline void arch_local_irq_restore(unsigned long flags)
{
- set_signals(flags);
+ um_set_signals(flags);
}
#define arch_local_irq_enable arch_local_irq_enable
diff --git a/arch/um/include/shared/longjmp.h b/arch/um/include/shared/longjmp.h
index bdb2869b72b31..8863319039f3d 100644
--- a/arch/um/include/shared/longjmp.h
+++ b/arch/um/include/shared/longjmp.h
@@ -18,7 +18,7 @@ extern void longjmp(jmp_buf, int);
enable = *(volatile int *)&signals_enabled; \
n = setjmp(*buf); \
if(n != 0) \
- set_signals_trace(enable); \
+ um_set_signals_trace(enable); \
n; })
#endif
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index 96d400387c93e..03ffbdddcc480 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -238,8 +238,8 @@ extern void send_sigio_to_self(void);
extern int change_sig(int signal, int on);
extern void block_signals(void);
extern void unblock_signals(void);
-extern int set_signals(int enable);
-extern int set_signals_trace(int enable);
+extern int um_set_signals(int enable);
+extern int um_set_signals_trace(int enable);
extern int os_is_signal_stack(void);
extern void deliver_alarm(void);
extern void register_pm_wake_signal(void);
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index b1e5634398d09..3a85bde3e1734 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -6,7 +6,7 @@
#include <linux/module.h>
#include <os.h>
-EXPORT_SYMBOL(set_signals);
+EXPORT_SYMBOL(um_set_signals);
EXPORT_SYMBOL(signals_enabled);
EXPORT_SYMBOL(os_stat_fd);
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index 6597ea1986ffa..9e71794839e87 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -132,7 +132,7 @@ static void update_thread(void)
int n;
char c;
- flags = set_signals_trace(0);
+ flags = um_set_signals_trace(0);
CATCH_EINTR(n = write(sigio_private[0], &c, sizeof(c)));
if (n != sizeof(c)) {
printk(UM_KERN_ERR "update_thread : write failed, err = %d\n",
@@ -147,7 +147,7 @@ static void update_thread(void)
goto fail;
}
- set_signals_trace(flags);
+ um_set_signals_trace(flags);
return;
fail:
/* Critical section start */
@@ -161,7 +161,7 @@ static void update_thread(void)
close(write_sigio_fds[0]);
close(write_sigio_fds[1]);
/* Critical section end */
- set_signals_trace(flags);
+ um_set_signals_trace(flags);
}
int __add_sigio_fd(int fd)
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 6cf098c23a394..24a403a70a020 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -94,7 +94,7 @@ void sig_handler(int sig, struct siginfo *si, mcontext_t *mc)
sig_handler_common(sig, si, mc);
- set_signals_trace(enabled);
+ um_set_signals_trace(enabled);
}
static void timer_real_alarm_handler(mcontext_t *mc)
@@ -126,7 +126,7 @@ void timer_alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc)
signals_active &= ~SIGALRM_MASK;
- set_signals_trace(enabled);
+ um_set_signals_trace(enabled);
}
void deliver_alarm(void) {
@@ -348,7 +348,7 @@ void unblock_signals(void)
}
}
-int set_signals(int enable)
+int um_set_signals(int enable)
{
int ret;
if (signals_enabled == enable)
@@ -362,7 +362,7 @@ int set_signals(int enable)
return ret;
}
-int set_signals_trace(int enable)
+int um_set_signals_trace(int enable)
{
int ret;
if (signals_enabled == enable)
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit ec961cf3241153e0f27d850f1bf0f172e7d27a21 ]
The hardware is capable of controlling any non-contiguous sequence of
LEDs specified in the DT using qcom,enabled-strings as u32
array, and this also follows from the DT-bindings documentation. The
numbers specified in this array represent indices of the LED strings
that are to be enabled and disabled.
Its value is appropriately used to setup and enable string modules, but
completely disregarded in the set_brightness paths which only iterate
over the number of strings linearly.
Take an example where only string 2 is enabled with
qcom,enabled_strings=<2>: this string is appropriately enabled but
subsequent brightness changes would have only touched the zero'th
brightness register because num_strings is 1 here. This is simply
addressed by looking up the string for this index in the enabled_strings
array just like the other codepaths that iterate over num_strings.
Likewise enabled_strings is now also used in the autodetection path for
consistent behaviour: when a list of strings is specified in DT only
those strings will be probed for autodetection, analogous to how the
number of strings that need to be probed is already bound by
qcom,num-strings. After all autodetection uses the set_brightness
helpers to set an initial value, which could otherwise end up changing
brightness on a different set of strings.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Fixes: 03b2b5e86986 ("backlight: qcom-wled: Add support for WLED4 peripheral")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 5306b06044b4f..f12c76d6e61de 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -237,7 +237,7 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness)
for (i = 0; i < wled->cfg.num_strings; ++i) {
rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
- WLED3_SINK_REG_BRIGHT(i),
+ WLED3_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]),
&v, sizeof(v));
if (rc < 0)
return rc;
@@ -260,7 +260,7 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness)
for (i = 0; i < wled->cfg.num_strings; ++i) {
rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
- WLED4_SINK_REG_BRIGHT(i),
+ WLED4_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]),
&v, sizeof(v));
if (rc < 0)
return rc;
@@ -571,7 +571,7 @@ unlock_mutex:
static void wled_auto_string_detection(struct wled *wled)
{
- int rc = 0, i, delay_time_us;
+ int rc = 0, i, j, delay_time_us;
u32 sink_config = 0;
u8 sink_test = 0, sink_valid = 0, val;
bool fault_set;
@@ -618,14 +618,15 @@ static void wled_auto_string_detection(struct wled *wled)
/* Iterate through the strings one by one */
for (i = 0; i < wled->cfg.num_strings; i++) {
- sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + i));
+ j = wled->cfg.enabled_strings[i];
+ sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + j));
/* Enable feedback control */
rc = regmap_write(wled->regmap, wled->ctrl_addr +
- WLED3_CTRL_REG_FEEDBACK_CONTROL, i + 1);
+ WLED3_CTRL_REG_FEEDBACK_CONTROL, j + 1);
if (rc < 0) {
dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n",
- i + 1, rc);
+ j + 1, rc);
goto failed_detect;
}
@@ -634,7 +635,7 @@ static void wled_auto_string_detection(struct wled *wled)
WLED4_SINK_REG_CURR_SINK, sink_test);
if (rc < 0) {
dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n",
- i + 1, rc);
+ j + 1, rc);
goto failed_detect;
}
@@ -661,7 +662,7 @@ static void wled_auto_string_detection(struct wled *wled)
if (fault_set)
dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n",
- i + 1);
+ j + 1);
else
sink_valid |= sink_test;
@@ -701,15 +702,16 @@ static void wled_auto_string_detection(struct wled *wled)
/* Enable valid sinks */
if (wled->version == 4) {
for (i = 0; i < wled->cfg.num_strings; i++) {
+ j = wled->cfg.enabled_strings[i];
if (sink_config &
- BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i))
+ BIT(WLED4_SINK_REG_CURR_SINK_SHFT + j))
val = WLED4_SINK_REG_STR_MOD_MASK;
else
/* Disable modulator_en for unused sink */
val = 0;
rc = regmap_write(wled->regmap, wled->sink_addr +
- WLED4_SINK_REG_STR_MOD_EN(i), val);
+ WLED4_SINK_REG_STR_MOD_EN(j), val);
if (rc < 0) {
dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n",
rc);
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit ca0fe0d7c35c97528bdf621fdca75f13157c27af ]
In __nonstatic_find_io_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There is a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().
Fix this bug by adding a check of res.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module")
Signed-off-by: Zhou Qingyang <[email protected]>
[[email protected]: Fix typo in commit message]
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pcmcia/rsrc_nonstatic.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index bb15a8bdbaab5..827ca6e9ee54a 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -690,6 +690,9 @@ static struct resource *__nonstatic_find_io_region(struct pcmcia_socket *s,
unsigned long min = base;
int ret;
+ if (!res)
+ return NULL;
+
data.mask = align - 1;
data.offset = base & data.mask;
data.map = &s_data->io_db;
--
2.34.1
From: Daniel Borkmann <[email protected]>
[ Upstream commit e60b0d12a95dcf16a63225cead4541567f5cb517 ]
If we ever get to a point again where we convert a bogus looking <ptr>_or_null
typed register containing a non-zero fixed or variable offset, then lets not
reset these bounds to zero since they are not and also don't promote the register
to a <ptr> type, but instead leave it as <ptr>_or_null. Converting to a unknown
register could be an avenue as well, but then if we run into this case it would
allow to leak a kernel pointer this way.
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 18c75d6d98960..7be72682dfda0 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -8771,15 +8771,15 @@ static void mark_ptr_or_null_reg(struct bpf_func_state *state,
{
if (reg_type_may_be_null(reg->type) && reg->id == id &&
!WARN_ON_ONCE(!reg->id)) {
- /* Old offset (both fixed and variable parts) should
- * have been known-zero, because we don't allow pointer
- * arithmetic on pointers that might be NULL.
- */
if (WARN_ON_ONCE(reg->smin_value || reg->smax_value ||
!tnum_equals_const(reg->var_off, 0) ||
reg->off)) {
- __mark_reg_known_zero(reg);
- reg->off = 0;
+ /* Old offset (both fixed and variable parts) should
+ * have been known-zero, because we don't allow pointer
+ * arithmetic on pointers that might be NULL. If we
+ * see this happening, don't convert the register.
+ */
+ return;
}
if (is_null) {
reg->type = SCALAR_VALUE;
--
2.34.1
From: Clément Léger <[email protected]>
[ Upstream commit c5fc5ba8b6b7bebc05e45036a33405b4c5036c2f ]
nargs_prop refers to a property located in the reference that is found
within the nargs property. Use the correct reference node in call to
property_entry_read_int_array() to retrieve the correct nargs value.
Fixes: b06184acf751 ("software node: Add software_node_get_reference_args()")
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Sakari Ailus <[email protected]>
Reviewed-by: Daniel Scally <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/swnode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
index c46f6a8e14d23..3ba1232ce8451 100644
--- a/drivers/base/swnode.c
+++ b/drivers/base/swnode.c
@@ -535,7 +535,7 @@ software_node_get_reference_args(const struct fwnode_handle *fwnode,
return -ENOENT;
if (nargs_prop) {
- error = property_entry_read_int_array(swnode->node->properties,
+ error = property_entry_read_int_array(ref->node->properties,
nargs_prop, sizeof(u32),
&nargs_prop_val, 1);
if (error)
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit d5a73ec96cc57cf67e51b12820fc2354e7ca46f8 ]
As the possible failure of the allocation, the devm_ioremap() may return
NULL pointer.
Take tgec_initialization() as an example.
If allocation fails, the params->base_addr will be NULL pointer and will
be assigned to tgec->regs in tgec_config().
Then it will cause the dereference of NULL pointer in set_mac_address(),
which is called by tgec_init().
Therefore, it should be better to add the sanity check after the calling
of the devm_ioremap().
Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/fman/mac.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index d9fc5c456bf3e..39ae965cd4f64 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -94,14 +94,17 @@ static void mac_exception(void *handle, enum fman_mac_exceptions ex)
__func__, ex);
}
-static void set_fman_mac_params(struct mac_device *mac_dev,
- struct fman_mac_params *params)
+static int set_fman_mac_params(struct mac_device *mac_dev,
+ struct fman_mac_params *params)
{
struct mac_priv_s *priv = mac_dev->priv;
params->base_addr = (typeof(params->base_addr))
devm_ioremap(priv->dev, mac_dev->res->start,
resource_size(mac_dev->res));
+ if (!params->base_addr)
+ return -ENOMEM;
+
memcpy(¶ms->addr, mac_dev->addr, sizeof(mac_dev->addr));
params->max_speed = priv->max_speed;
params->phy_if = mac_dev->phy_if;
@@ -112,6 +115,8 @@ static void set_fman_mac_params(struct mac_device *mac_dev,
params->event_cb = mac_exception;
params->dev_id = mac_dev;
params->internal_phy_node = priv->internal_phy_node;
+
+ return 0;
}
static int tgec_initialization(struct mac_device *mac_dev)
@@ -123,7 +128,9 @@ static int tgec_initialization(struct mac_device *mac_dev)
priv = mac_dev->priv;
- set_fman_mac_params(mac_dev, ¶ms);
+ err = set_fman_mac_params(mac_dev, ¶ms);
+ if (err)
+ goto _return;
mac_dev->fman_mac = tgec_config(¶ms);
if (!mac_dev->fman_mac) {
@@ -169,7 +176,9 @@ static int dtsec_initialization(struct mac_device *mac_dev)
priv = mac_dev->priv;
- set_fman_mac_params(mac_dev, ¶ms);
+ err = set_fman_mac_params(mac_dev, ¶ms);
+ if (err)
+ goto _return;
mac_dev->fman_mac = dtsec_config(¶ms);
if (!mac_dev->fman_mac) {
@@ -218,7 +227,9 @@ static int memac_initialization(struct mac_device *mac_dev)
priv = mac_dev->priv;
- set_fman_mac_params(mac_dev, ¶ms);
+ err = set_fman_mac_params(mac_dev, ¶ms);
+ if (err)
+ goto _return;
if (priv->max_speed == SPEED_10000)
params.phy_if = PHY_INTERFACE_MODE_XGMII;
--
2.34.1
From: Yang Yingliang <[email protected]>
[ Upstream commit e730cd57ac2dfe94bca0f14a3be8e1b21de41a9c ]
Some variables are leaked in the error handling in alloc_rtllib(), free
the variables in the error path.
Fixes: 94a799425eee ("From: wlanfae <[email protected]>")
Reviewed-by: Dan Carpenter <[email protected]>
Reviewed-by: Pavel Skripkin <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8192e/rtllib_module.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib_module.c b/drivers/staging/rtl8192e/rtllib_module.c
index 64d9feee1f392..f00ac94b2639b 100644
--- a/drivers/staging/rtl8192e/rtllib_module.c
+++ b/drivers/staging/rtl8192e/rtllib_module.c
@@ -88,7 +88,7 @@ struct net_device *alloc_rtllib(int sizeof_priv)
err = rtllib_networks_allocate(ieee);
if (err) {
pr_err("Unable to allocate beacon storage: %d\n", err);
- goto failed;
+ goto free_netdev;
}
rtllib_networks_initialize(ieee);
@@ -121,11 +121,13 @@ struct net_device *alloc_rtllib(int sizeof_priv)
ieee->hwsec_active = 0;
memset(ieee->swcamtable, 0, sizeof(struct sw_cam_table) * 32);
- rtllib_softmac_init(ieee);
+ err = rtllib_softmac_init(ieee);
+ if (err)
+ goto free_crypt_info;
ieee->pHTInfo = kzalloc(sizeof(struct rt_hi_throughput), GFP_KERNEL);
if (!ieee->pHTInfo)
- return NULL;
+ goto free_softmac;
HTUpdateDefaultSetting(ieee);
HTInitializeHTInfo(ieee);
@@ -141,8 +143,14 @@ struct net_device *alloc_rtllib(int sizeof_priv)
return dev;
- failed:
+free_softmac:
+ rtllib_softmac_free(ieee);
+free_crypt_info:
+ lib80211_crypt_info_free(&ieee->crypt_info);
+ rtllib_networks_free(ieee);
+free_netdev:
free_netdev(dev);
+
return NULL;
}
EXPORT_SYMBOL(alloc_rtllib);
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit b38cd3b42fba66cc538edb9cf77e07881f43f8e2 ]
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.
Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_bcm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index ef54afa293574..7abf99f0ee399 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1188,7 +1188,12 @@ static int bcm_probe(struct platform_device *pdev)
return -ENOMEM;
dev->dev = &pdev->dev;
- dev->irq = platform_get_irq(pdev, 0);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+
+ dev->irq = ret;
/* Initialize routing field to an unused value */
dev->pcm_int_params[0] = 0xff;
--
2.34.1
From: Nishanth Menon <[email protected]>
[ Upstream commit a27a93bf70045be54b594fa8482959ffb84166d7 ]
A53's L2 cache[1] on AM642[2] is 256KB. A53's L2 is fixed line length
of 64 bytes and 16-way set-associative cache structure.
256KB of L2 / 64 (line length) = 4096 ways
4096 ways / 16 = 256 sets
Fix the l2 cache-sets.
[1] https://developer.arm.com/documentation/ddi0500/j/Level-2-Memory-System/About-the-L2-memory-system?lang=en
[2] https://www.ti.com/lit/pdf/spruim2
Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Reported-by: Peng Fan <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am642.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am642.dtsi b/arch/arm64/boot/dts/ti/k3-am642.dtsi
index e2b397c884018..8a76f4821b11b 100644
--- a/arch/arm64/boot/dts/ti/k3-am642.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642.dtsi
@@ -60,6 +60,6 @@
cache-level = <2>;
cache-size = <0x40000>;
cache-line-size = <64>;
- cache-sets = <512>;
+ cache-sets = <256>;
};
};
--
2.34.1
From: Valentin Caron <[email protected]>
[ Upstream commit 56a23f9319e86e1d62a109896e2c7e52c414e67d ]
Terminate DMA transaction and clear CR3_DMAT when shutdown is requested,
instead of when remove is requested. If DMA transfer is not stopped in
shutdown ops, driver will fail to start a new DMA transfer after next
startup ops.
Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <[email protected]>
Signed-off-by: Valentin Caron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/stm32-usart.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 8f032e77b954a..3366914dad7a8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -691,6 +691,11 @@ static void stm32_usart_shutdown(struct uart_port *port)
u32 val, isr;
int ret;
+ if (stm32_port->tx_dma_busy) {
+ dmaengine_terminate_async(stm32_port->tx_ch);
+ stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+ }
+
/* Disable modem control interrupts */
stm32_usart_disable_ms(port);
@@ -1385,7 +1390,6 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR);
if (stm32_port->tx_ch) {
- dmaengine_terminate_async(stm32_port->tx_ch);
stm32_usart_of_dma_tx_remove(stm32_port, pdev);
dma_release_channel(stm32_port->tx_ch);
}
--
2.34.1
From: Anton Vasilyev <[email protected]>
[ Upstream commit 589a9f0eb799f77de2c09583bf5bad221fa5d685 ]
dvb_usb_device_init stores parts of properties at d->props
and d->desc and uses it on dvb_usb_device_exit.
Free of properties on module probe leads to use after free.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597
The patch makes properties static instead of allocated on heap to prevent
memleak and use after free.
Also fixes s421_properties.devices initialization to have 2 element
instead of 6 copied from p7500_properties.
[mchehab: fix function call alignments]
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Anton Vasilyev <[email protected]>
Fixes: 299c7007e936 ("media: dw2102: Fix memleak on sequence of probes")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/dw2102.c | 338 ++++++++++++++++++-----------
1 file changed, 215 insertions(+), 123 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index f0e686b05dc63..ca75ebdc10b37 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -2150,46 +2150,153 @@ static struct dvb_usb_device_properties s6x0_properties = {
}
};
-static const struct dvb_usb_device_description d1100 = {
- "Prof 1100 USB ",
- {&dw2102_table[PROF_1100], NULL},
- {NULL},
-};
+static struct dvb_usb_device_properties p1100_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct dw2102_state),
+ .firmware = P1100_FIRMWARE,
+ .no_reconnect = 1,
-static const struct dvb_usb_device_description d660 = {
- "TeVii S660 USB",
- {&dw2102_table[TEVII_S660], NULL},
- {NULL},
-};
+ .i2c_algo = &s6x0_i2c_algo,
+ .rc.core = {
+ .rc_interval = 150,
+ .rc_codes = RC_MAP_TBS_NEC,
+ .module_name = "dw2102",
+ .allowed_protos = RC_PROTO_BIT_NEC,
+ .rc_query = prof_rc_query,
+ },
-static const struct dvb_usb_device_description d480_1 = {
- "TeVii S480.1 USB",
- {&dw2102_table[TEVII_S480_1], NULL},
- {NULL},
+ .generic_bulk_ctrl_endpoint = 0x81,
+ .num_adapters = 1,
+ .download_firmware = dw2102_load_firmware,
+ .read_mac_address = s6x0_read_mac_address,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .frontend_attach = stv0288_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ } },
+ }
+ },
+ .num_device_descs = 1,
+ .devices = {
+ {"Prof 1100 USB ",
+ {&dw2102_table[PROF_1100], NULL},
+ {NULL},
+ },
+ }
};
-static const struct dvb_usb_device_description d480_2 = {
- "TeVii S480.2 USB",
- {&dw2102_table[TEVII_S480_2], NULL},
- {NULL},
-};
+static struct dvb_usb_device_properties s660_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct dw2102_state),
+ .firmware = S660_FIRMWARE,
+ .no_reconnect = 1,
-static const struct dvb_usb_device_description d7500 = {
- "Prof 7500 USB DVB-S2",
- {&dw2102_table[PROF_7500], NULL},
- {NULL},
-};
+ .i2c_algo = &s6x0_i2c_algo,
+ .rc.core = {
+ .rc_interval = 150,
+ .rc_codes = RC_MAP_TEVII_NEC,
+ .module_name = "dw2102",
+ .allowed_protos = RC_PROTO_BIT_NEC,
+ .rc_query = dw2102_rc_query,
+ },
-static const struct dvb_usb_device_description d421 = {
- "TeVii S421 PCI",
- {&dw2102_table[TEVII_S421], NULL},
- {NULL},
+ .generic_bulk_ctrl_endpoint = 0x81,
+ .num_adapters = 1,
+ .download_firmware = dw2102_load_firmware,
+ .read_mac_address = s6x0_read_mac_address,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .frontend_attach = ds3000_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ } },
+ }
+ },
+ .num_device_descs = 3,
+ .devices = {
+ {"TeVii S660 USB",
+ {&dw2102_table[TEVII_S660], NULL},
+ {NULL},
+ },
+ {"TeVii S480.1 USB",
+ {&dw2102_table[TEVII_S480_1], NULL},
+ {NULL},
+ },
+ {"TeVii S480.2 USB",
+ {&dw2102_table[TEVII_S480_2], NULL},
+ {NULL},
+ },
+ }
};
-static const struct dvb_usb_device_description d632 = {
- "TeVii S632 USB",
- {&dw2102_table[TEVII_S632], NULL},
- {NULL},
+static struct dvb_usb_device_properties p7500_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct dw2102_state),
+ .firmware = P7500_FIRMWARE,
+ .no_reconnect = 1,
+
+ .i2c_algo = &s6x0_i2c_algo,
+ .rc.core = {
+ .rc_interval = 150,
+ .rc_codes = RC_MAP_TBS_NEC,
+ .module_name = "dw2102",
+ .allowed_protos = RC_PROTO_BIT_NEC,
+ .rc_query = prof_rc_query,
+ },
+
+ .generic_bulk_ctrl_endpoint = 0x81,
+ .num_adapters = 1,
+ .download_firmware = dw2102_load_firmware,
+ .read_mac_address = s6x0_read_mac_address,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .frontend_attach = prof_7500_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ } },
+ }
+ },
+ .num_device_descs = 1,
+ .devices = {
+ {"Prof 7500 USB DVB-S2",
+ {&dw2102_table[PROF_7500], NULL},
+ {NULL},
+ },
+ }
};
static struct dvb_usb_device_properties su3000_properties = {
@@ -2273,6 +2380,59 @@ static struct dvb_usb_device_properties su3000_properties = {
}
};
+static struct dvb_usb_device_properties s421_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct dw2102_state),
+ .power_ctrl = su3000_power_ctrl,
+ .num_adapters = 1,
+ .identify_state = su3000_identify_state,
+ .i2c_algo = &su3000_i2c_algo,
+
+ .rc.core = {
+ .rc_interval = 150,
+ .rc_codes = RC_MAP_SU3000,
+ .module_name = "dw2102",
+ .allowed_protos = RC_PROTO_BIT_RC5,
+ .rc_query = su3000_rc_query,
+ },
+
+ .read_mac_address = su3000_read_mac_address,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .streaming_ctrl = su3000_streaming_ctrl,
+ .frontend_attach = m88rs2000_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ }
+ } },
+ }
+ },
+ .num_device_descs = 2,
+ .devices = {
+ { "TeVii S421 PCI",
+ { &dw2102_table[TEVII_S421], NULL },
+ { NULL },
+ },
+ { "TeVii S632 USB",
+ { &dw2102_table[TEVII_S632], NULL },
+ { NULL },
+ },
+ }
+};
+
static struct dvb_usb_device_properties t220_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
@@ -2390,101 +2550,33 @@ static struct dvb_usb_device_properties tt_s2_4600_properties = {
static int dw2102_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- int retval = -ENOMEM;
- struct dvb_usb_device_properties *p1100;
- struct dvb_usb_device_properties *s660;
- struct dvb_usb_device_properties *p7500;
- struct dvb_usb_device_properties *s421;
-
- p1100 = kmemdup(&s6x0_properties,
- sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
- if (!p1100)
- goto err0;
-
- /* copy default structure */
- /* fill only different fields */
- p1100->firmware = P1100_FIRMWARE;
- p1100->devices[0] = d1100;
- p1100->rc.core.rc_query = prof_rc_query;
- p1100->rc.core.rc_codes = RC_MAP_TBS_NEC;
- p1100->adapter->fe[0].frontend_attach = stv0288_frontend_attach;
-
- s660 = kmemdup(&s6x0_properties,
- sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
- if (!s660)
- goto err1;
-
- s660->firmware = S660_FIRMWARE;
- s660->num_device_descs = 3;
- s660->devices[0] = d660;
- s660->devices[1] = d480_1;
- s660->devices[2] = d480_2;
- s660->adapter->fe[0].frontend_attach = ds3000_frontend_attach;
-
- p7500 = kmemdup(&s6x0_properties,
- sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
- if (!p7500)
- goto err2;
-
- p7500->firmware = P7500_FIRMWARE;
- p7500->devices[0] = d7500;
- p7500->rc.core.rc_query = prof_rc_query;
- p7500->rc.core.rc_codes = RC_MAP_TBS_NEC;
- p7500->adapter->fe[0].frontend_attach = prof_7500_frontend_attach;
-
-
- s421 = kmemdup(&su3000_properties,
- sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
- if (!s421)
- goto err3;
-
- s421->num_device_descs = 2;
- s421->devices[0] = d421;
- s421->devices[1] = d632;
- s421->adapter->fe[0].frontend_attach = m88rs2000_frontend_attach;
-
- if (0 == dvb_usb_device_init(intf, &dw2102_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &dw2104_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &dw3101_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &s6x0_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, p1100,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, s660,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, p7500,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, s421,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &su3000_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &t220_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &tt_s2_4600_properties,
- THIS_MODULE, NULL, adapter_nr)) {
-
- /* clean up copied properties */
- kfree(s421);
- kfree(p7500);
- kfree(s660);
- kfree(p1100);
+ if (!(dvb_usb_device_init(intf, &dw2102_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &dw2104_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &dw3101_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &s6x0_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &p1100_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &s660_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &p7500_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &s421_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &su3000_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &t220_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &tt_s2_4600_properties,
+ THIS_MODULE, NULL, adapter_nr))) {
return 0;
}
- retval = -ENODEV;
- kfree(s421);
-err3:
- kfree(p7500);
-err2:
- kfree(s660);
-err1:
- kfree(p1100);
-err0:
- return retval;
+ return -ENODEV;
}
static void dw2102_disconnect(struct usb_interface *intf)
--
2.34.1
From: Tasos Sahanidis <[email protected]>
[ Upstream commit fb48febce7e30baed94dd791e19521abd2c3fd83 ]
When the watchdog detects a disk change, it calls cancel_activity(),
which in turn tries to cancel the fd_timer delayed work.
In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning
it is trying to cancel its own work.
This results in a hang as cancel_delayed_work_sync() is waiting for the
watchdog (itself) to return, which never happens.
This can be reproduced relatively consistently by attempting to read a
broken floppy, and ejecting it while IO is being attempted and retried.
To resolve this, this patch calls cancel_delayed_work() instead, which
cancels the work without waiting for the watchdog to return and finish.
Before this regression was introduced, the code in this section used
del_timer(), and not del_timer_sync() to delete the watchdog timer.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq")
Signed-off-by: Tasos Sahanidis <[email protected]>
Signed-off-by: Denis Efremov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/floppy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index fb2aafabfebc1..f50bbaba5762c 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -1014,7 +1014,7 @@ static DECLARE_DELAYED_WORK(fd_timer, fd_timer_workfn);
static void cancel_activity(void)
{
do_floppy = NULL;
- cancel_delayed_work_sync(&fd_timer);
+ cancel_delayed_work(&fd_timer);
cancel_work_sync(&floppy_work);
}
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit f85196bdd5a50da74670250564740fc852b3c239 ]
BCM4752 and LNV4752 ACPI nodes describe a Broadcom 4752 GPS module
attached to an UART of the system.
The GPS modules talk a custom protocol which only works with a closed-
source Android gpsd daemon which knows this protocol.
The ACPI nodes also describe GPIOs to turn the GPS on/off these are
handled by the net/rfkill/rfkill-gpio.c code. This handling predates the
addition of enumeration of ACPI instantiated serdevs to the kernel and
was broken by that addition, because the ACPI scan code now no longer
instantiates platform_device-s for these nodes.
Rename the i2c_multi_instantiate_ids HID list to ignore_serial_bus_ids
and add the BCM4752 and LNV4752 HIDs, so that rfkill-gpio gets
a platform_device to bind to again; and so that a tty cdev for gpsd
gets created for these.
Fixes: e361d1f85855 ("ACPI / scan: Fix enumeration for special UART devices")
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/scan.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 5b54c80b9d32a..6e9cd41c5f9b1 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1690,6 +1690,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
{
struct list_head resource_list;
bool is_serial_bus_slave = false;
+ static const struct acpi_device_id ignore_serial_bus_ids[] = {
/*
* These devices have multiple I2cSerialBus resources and an i2c-client
* must be instantiated for each, each with its own i2c_device_id.
@@ -1698,11 +1699,18 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
* drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
* which i2c_device_id to use for each resource.
*/
- static const struct acpi_device_id i2c_multi_instantiate_ids[] = {
{"BSG1160", },
{"BSG2150", },
{"INT33FE", },
{"INT3515", },
+ /*
+ * HIDs of device with an UartSerialBusV2 resource for which userspace
+ * expects a regular tty cdev to be created (instead of the in kernel
+ * serdev) and which have a kernel driver which expects a platform_dev
+ * such as the rfkill-gpio driver.
+ */
+ {"BCM4752", },
+ {"LNV4752", },
{}
};
@@ -1716,8 +1724,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
fwnode_property_present(&device->fwnode, "baud")))
return true;
- /* Instantiate a pdev for the i2c-multi-instantiate drv to bind to */
- if (!acpi_match_device_ids(device, i2c_multi_instantiate_ids))
+ if (!acpi_match_device_ids(device, ignore_serial_bus_ids))
return false;
INIT_LIST_HEAD(&resource_list);
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 0a139358548968b2ff308257b4fbeec7badcc3e1 ]
The kernel already provides appropriate primitives to perform endianness
conversion which should be used in favour of manual bit-wrangling.
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index c057368e5056e..5306b06044b4f 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -231,14 +231,14 @@ struct wled {
static int wled3_set_brightness(struct wled *wled, u16 brightness)
{
int rc, i;
- u8 v[2];
+ __le16 v;
- v[0] = brightness & 0xff;
- v[1] = (brightness >> 8) & 0xf;
+ v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
for (i = 0; i < wled->cfg.num_strings; ++i) {
rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
- WLED3_SINK_REG_BRIGHT(i), v, 2);
+ WLED3_SINK_REG_BRIGHT(i),
+ &v, sizeof(v));
if (rc < 0)
return rc;
}
@@ -250,18 +250,18 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness)
{
int rc, i;
u16 low_limit = wled->max_brightness * 4 / 1000;
- u8 v[2];
+ __le16 v;
/* WLED4's lower limit of operation is 0.4% */
if (brightness > 0 && brightness < low_limit)
brightness = low_limit;
- v[0] = brightness & 0xff;
- v[1] = (brightness >> 8) & 0xf;
+ v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
for (i = 0; i < wled->cfg.num_strings; ++i) {
rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
- WLED4_SINK_REG_BRIGHT(i), v, 2);
+ WLED4_SINK_REG_BRIGHT(i),
+ &v, sizeof(v));
if (rc < 0)
return rc;
}
@@ -273,21 +273,20 @@ static int wled5_set_brightness(struct wled *wled, u16 brightness)
{
int rc, offset;
u16 low_limit = wled->max_brightness * 1 / 1000;
- u8 v[2];
+ __le16 v;
/* WLED5's lower limit is 0.1% */
if (brightness < low_limit)
brightness = low_limit;
- v[0] = brightness & 0xff;
- v[1] = (brightness >> 8) & 0x7f;
+ v = cpu_to_le16(brightness & WLED5_SINK_REG_BRIGHT_MAX_15B);
offset = (wled->cfg.mod_sel == MOD_A) ?
WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB :
WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB;
rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset,
- v, 2);
+ &v, sizeof(v));
return rc;
}
--
2.34.1
From: Robert Marko <[email protected]>
[ Upstream commit 0734f8311ce72c9041e5142769eff2083889c172 ]
CN9130 has a built-in CP115 which has 2 GPIO controllers, but unlike in
Armada 7k and 8k both are left disabled by the SoC DTSI.
This first of all makes no sense as they are always present due to being
SoC built-in and its an issue as boards like CN9130-CRB use the CPO GPIO2
pins for regulators and SD card support without enabling them first.
So, enable both of them like Armada 7k and 8k do.
Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/marvell/cn9130.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi
index 71769ac7f0585..327b04134134f 100644
--- a/arch/arm64/boot/dts/marvell/cn9130.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -42,3 +42,11 @@
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 5bfbf65fcca7325e4d89d289b3c286e11220e386 ]
When comparing with intel-aero atomisp [1], it looks like
punit_ddr_dvfs_enable() should take `false` as an argument on mrfld_power
up case.
Code from the intel-aero kernel [1]:
int atomisp_mrfld_power_down(struct atomisp_device *isp)
{
[...]
/*WA:Enable DVFS*/
if (IS_CHT)
punit_ddr_dvfs_enable(true);
int atomisp_mrfld_power_up(struct atomisp_device *isp)
{
[...]
/*WA for PUNIT, if DVFS enabled, ISP timeout observed*/
if (IS_CHT)
punit_ddr_dvfs_enable(false);
This patch fixes the inverted argument as per the intel-aero code, as
well as its comment. While here, fix space issues for comments in
atomisp_mrfld_power().
Note that it does not seem to be possible to unify the up/down cases for
punit_ddr_dvfs_enable(), i.e., we can't do something like the following:
if (IS_CHT)
punit_ddr_dvfs_enable(!enable);
because according to the intel-aero code [1], the DVFS is disabled
before "writing 0x0 to ISPSSPM0 bit[1:0]" and the DVFS is enabled after
"writing 0x3 to ISPSSPM0 bit[1:0]".
[1] https://github.com/intel-aero/linux-kernel/blob/a1b673258feb915268377275130c5c5df0eafc82/drivers/media/pci/atomisp/atomisp_driver/atomisp_v4l2.c#L431-L514
Fixes: 0f441fd70b1e ("media: atomisp: simplify the power down/up code")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index 0511c454e769d..7982cc143374a 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -711,15 +711,15 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
dev_dbg(isp->dev, "IUNIT power-%s.\n", enable ? "on" : "off");
- /*WA:Enable DVFS*/
+ /* WA for P-Unit, if DVFS enabled, ISP timeout observed */
if (IS_CHT && enable)
- punit_ddr_dvfs_enable(true);
+ punit_ddr_dvfs_enable(false);
/*
* FIXME:WA for ECS28A, with this sleep, CTS
* android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceAbort
* PASS, no impact on other platforms
- */
+ */
if (IS_BYT && enable)
msleep(10);
@@ -727,7 +727,7 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSPM0,
val, MRFLD_ISPSSPM0_ISPSSC_MASK);
- /*WA:Enable DVFS*/
+ /* WA:Enable DVFS */
if (IS_CHT && !enable)
punit_ddr_dvfs_enable(true);
--
2.34.1
From: Lukasz Luba <[email protected]>
[ Upstream commit 93d9e6f93e1586fcc97498c764be2e8c8401f4bd ]
The thermal pressure signal gives information to the scheduler about
reduced CPU capacity due to thermal. It is based on a value stored in
a per-cpu 'thermal_pressure' variable. The online CPUs will get the
new value there, while the offline won't. Unfortunately, when the CPU
is back online, the value read from per-cpu variable might be wrong
(stale data). This might affect the scheduler decisions, since it
sees the CPU capacity differently than what is actually available.
Fix it by making sure that all online+offline CPUs would get the
proper value in their per-cpu variable when there is throttling
or throttling is removed.
Fixes: 275157b367f479 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Thara Gopinath <[email protected]>
Signed-off-by: Lukasz Luba <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index a2be0df7e1747..0138b2ec406dc 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -304,7 +304,8 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
if (capacity > max_capacity)
capacity = max_capacity;
- arch_set_thermal_pressure(policy->cpus, max_capacity - capacity);
+ arch_set_thermal_pressure(policy->related_cpus,
+ max_capacity - capacity);
/*
* In the unlikely case policy is unregistered do not enable
--
2.34.1
From: Prasad Malisetty <[email protected]>
[ Upstream commit fa09b2248714c64644576d8064e9bd292a504a0e ]
Replace pcie_1_pipe-clk clock name with pcie_1_pipe_clk
To match with dt binding.
Fixes: ab7772de8612 ("arm64: dts: qcom: SC7280: Add rpmhcc clock controller node")
Signed-off-by: Prasad Malisetty <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index f58336536a92a..692973c4f4344 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -429,7 +429,7 @@
<&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
<0>, <0>, <0>, <0>, <0>, <0>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
- "pcie_0_pipe_clk", "pcie_1_pipe-clk",
+ "pcie_0_pipe_clk", "pcie_1_pipe_clk",
"ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
"ufs_phy_tx_symbol_0_clk",
"usb3_phy_wrapper_gcc_usb30_pipe_clk";
--
2.34.1
From: Chengfeng Ye <[email protected]>
[ Upstream commit b4cb4d31631912842eb7dce02b4350cbb7562d5e ]
Pointer base points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing base before free tmpl.
Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <[email protected]>
Acked-by: Thara Gopinath <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qce/sha.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/qce/sha.c b/drivers/crypto/qce/sha.c
index 8e6fcf2c21cc0..59159f5e64e52 100644
--- a/drivers/crypto/qce/sha.c
+++ b/drivers/crypto/qce/sha.c
@@ -498,8 +498,8 @@ static int qce_ahash_register_one(const struct qce_ahash_def *def,
ret = crypto_register_ahash(alg);
if (ret) {
- kfree(tmpl);
dev_err(qce->dev, "%s registration failed\n", base->cra_name);
+ kfree(tmpl);
return ret;
}
--
2.34.1
From: Daniel Scally <[email protected]>
[ Upstream commit d2484fbf780762f6f9cc3abb7a07ee42dca2eaa3 ]
The kerneldoc for pm_runtime_set_suspended() says:
"It is not valid to call this function for devices with runtime PM
enabled"
To satisfy that requirement, re-order the calls so that
pm_runtime_enable() is the last one.
Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Signed-off-by: Daniel Scally <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov8865.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -2899,8 +2899,8 @@ static int ov8865_probe(struct i2c_clien
/* Runtime PM */
- pm_runtime_enable(sensor->dev);
pm_runtime_set_suspended(sensor->dev);
+ pm_runtime_enable(sensor->dev);
/* V4L2 subdev register */
From: George G. Davis <[email protected]>
[ Upstream commit baaf965f94308301d2dc554d72a87d7432cd5ce6 ]
The following KASAN BUG is observed when testing the rpc-if driver on
rcar-gen3:
root@rcar-gen3:~# modprobe -r rpc-if
[ 101.930146] ==================================================================
[ 101.937408] BUG: KASAN: slab-out-of-bounds in __lock_acquire+0x518/0x25d0
[ 101.944240] Read of size 8 at addr ffff0004c5be2750 by task modprobe/664
[ 101.950959]
[ 101.952466] CPU: 2 PID: 664 Comm: modprobe Not tainted 5.14.0-rc1-00342-g1a1464d7aa31 #1
[ 101.960578] Hardware name: Renesas H3ULCB board based on r8a77951 (DT)
[ 101.967120] Call trace:
[ 101.969580] dump_backtrace+0x0/0x2c0
[ 101.973275] show_stack+0x1c/0x30
[ 101.976616] dump_stack_lvl+0x9c/0xd8
[ 101.980301] print_address_description.constprop.0+0x74/0x2b8
[ 101.986071] kasan_report+0x1f4/0x26c
[ 101.989757] __asan_load8+0x98/0xd4
[ 101.993266] __lock_acquire+0x518/0x25d0
[ 101.997215] lock_acquire.part.0+0x18c/0x360
[ 102.001506] lock_acquire+0x74/0x90
[ 102.005013] _raw_spin_lock_irq+0x98/0x130
[ 102.009131] __pm_runtime_disable+0x30/0x210
[ 102.013427] rpcif_hb_remove+0x5c/0x70 [rpc_if]
[ 102.018001] platform_remove+0x40/0x80
[ 102.021771] __device_release_driver+0x234/0x350
[ 102.026412] driver_detach+0x158/0x20c
[ 102.030179] bus_remove_driver+0xa0/0x140
[ 102.034212] driver_unregister+0x48/0x80
[ 102.038153] platform_driver_unregister+0x18/0x24
[ 102.042879] rpcif_platform_driver_exit+0x1c/0x34 [rpc_if]
[ 102.048400] __arm64_sys_delete_module+0x210/0x310
[ 102.053212] invoke_syscall+0x60/0x190
[ 102.056986] el0_svc_common+0x12c/0x144
[ 102.060844] do_el0_svc+0x88/0xac
[ 102.064181] el0_svc+0x24/0x3c
[ 102.067257] el0t_64_sync_handler+0x1a8/0x1b0
[ 102.071634] el0t_64_sync+0x198/0x19c
[ 102.075315]
[ 102.076815] Allocated by task 628:
[ 102.080781]
[ 102.082280] Last potentially related work creation:
[ 102.087524]
[ 102.089022] The buggy address belongs to the object at ffff0004c5be2000
[ 102.089022] which belongs to the cache kmalloc-2k of size 2048
[ 102.101555] The buggy address is located 1872 bytes inside of
[ 102.101555] 2048-byte region [ffff0004c5be2000, ffff0004c5be2800)
[ 102.113486] The buggy address belongs to the page:
[ 102.118409]
[ 102.119908] Memory state around the buggy address:
[ 102.124711] ffff0004c5be2600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.131947] ffff0004c5be2680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.139181] >ffff0004c5be2700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.146412] ^
[ 102.152257] ffff0004c5be2780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.159491] ffff0004c5be2800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.166723] ==================================================================
The above bug is caused by use of the wrong pointer in the
rpcif_disable_rpm() call. Fix the bug by using the correct pointer.
Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver")
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/hyperbus/rpc-if.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c
index 367b0d72bf622..dc164c18f8429 100644
--- a/drivers/mtd/hyperbus/rpc-if.c
+++ b/drivers/mtd/hyperbus/rpc-if.c
@@ -152,9 +152,9 @@ static int rpcif_hb_remove(struct platform_device *pdev)
{
struct rpcif_hyperbus *hyperbus = platform_get_drvdata(pdev);
int error = hyperbus_unregister_device(&hyperbus->hbdev);
- struct rpcif *rpc = dev_get_drvdata(pdev->dev.parent);
- rpcif_disable_rpm(rpc);
+ rpcif_disable_rpm(&hyperbus->rpc);
+
return error;
}
--
2.34.1
From: Karthikeyan Kathirvel <[email protected]>
[ Upstream commit 436a4e88659842a7cf634d7cc088c8f2cc94ebf5 ]
DISABLE_KEY sets the key_len to 0, firmware will not delete the keys if
key_len is 0. Changing from security mode to open mode will cause mcast
to be still encrypted without vdev restart.
Set the proper key_len for DISABLE_KEY cmd to clear the keys in
firmware.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Sven Eckelmann <[email protected]>
Signed-off-by: Karthikeyan Kathirvel <[email protected]>
[[email protected]: split into separate patches, clean up commit message]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 4 +---
drivers/net/wireless/ath/ath11k/wmi.c | 3 ++-
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 89a64ebd620f3..aac10740f5752 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2655,9 +2655,7 @@ static int ath11k_install_key(struct ath11k_vif *arvif,
return 0;
if (cmd == DISABLE_KEY) {
- /* TODO: Check if FW expects value other than NONE for del */
- /* arg.key_cipher = WMI_CIPHER_NONE; */
- arg.key_len = 0;
+ arg.key_cipher = WMI_CIPHER_NONE;
arg.key_data = NULL;
goto install;
}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index c22ec921b2e97..e75e6ebdf2a65 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1671,7 +1671,8 @@ int ath11k_wmi_vdev_install_key(struct ath11k *ar,
tlv = (struct wmi_tlv *)(skb->data + sizeof(*cmd));
tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_BYTE) |
FIELD_PREP(WMI_TLV_LEN, key_len_aligned);
- memcpy(tlv->value, (u8 *)arg->key_data, key_len_aligned);
+ if (arg->key_data)
+ memcpy(tlv->value, (u8 *)arg->key_data, key_len_aligned);
ret = ath11k_wmi_cmd_send(wmi, skb, WMI_VDEV_INSTALL_KEY_CMDID);
if (ret) {
--
2.34.1
From: Peng Hao <[email protected]>
commit cf4a4493ff70874f8af26d75d4346c591c298e89 upstream.
There is a check for vm->sbm.sb_states before, and it should check
it here as well.
Signed-off-by: Peng Hao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug")
Cc: [email protected] # v5.8+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/virtio/virtio_mem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/virtio/virtio_mem.c
+++ b/drivers/virtio/virtio_mem.c
@@ -577,7 +577,7 @@ static int virtio_mem_sbm_sb_states_prep
return -ENOMEM;
mutex_lock(&vm->hotplug_mutex);
- if (new_bitmap)
+ if (vm->sbm.sb_states)
memcpy(new_bitmap, vm->sbm.sb_states, old_pages * PAGE_SIZE);
old_bitmap = vm->sbm.sb_states;
From: Alexander Aring <[email protected]>
[ Upstream commit 1b9beda83e27a0c2cd75d1cb743c297c7b36c844 ]
This patch will surround the AF_INET6 case in sk_error_report() of dlm
with a #if IS_ENABLED(CONFIG_IPV6). The field sk->sk_v6_daddr is not
defined when CONFIG_IPV6 is disabled. If CONFIG_IPV6 is disabled, the
socket creation with AF_INET6 should already fail because a runtime
check if AF_INET6 is registered. However if there is the possibility
that AF_INET6 is set as sk_family the sk_error_report() callback will
print then an invalid family type error.
Reported-by: kernel test robot <[email protected]>
Fixes: 4c3d90570bcc ("fs: dlm: don't call kernel_getpeername() in error_report()")
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lowcomms.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 7b1c5f05a988b..7a8efce1c343e 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -612,6 +612,7 @@ static void lowcomms_error_report(struct sock *sk)
ntohs(inet->inet_dport), sk->sk_err,
sk->sk_err_soft);
break;
+#if IS_ENABLED(CONFIG_IPV6)
case AF_INET6:
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
"sending to node %d at %pI6c, "
@@ -620,6 +621,7 @@ static void lowcomms_error_report(struct sock *sk)
ntohs(inet->inet_dport), sk->sk_err,
sk->sk_err_soft);
break;
+#endif
default:
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
"invalid socket family %d set, "
--
2.34.1
From: Thomas Hellström <[email protected]>
commit 95d35838880fb040ccb9fe4a48816bd0c8b62df5 upstream.
If a dma_fence_array is reported signaled by a call to
dma_fence_is_signaled(), it may leak the PENDING_ERROR status.
Fix this by clearing the PENDING_ERROR status if we return true in
dma_fence_array_signaled().
v2:
- Update Cc list, and add R-b.
Fixes: 1f70b8b812f3 ("dma-fence: Propagate errors to dma-fence-array container")
Cc: Chris Wilson <[email protected]>
Cc: Sumit Semwal <[email protected]>
Cc: Gustavo Padovan <[email protected]>
Cc: Christian König <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # v5.4+
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma-buf/dma-fence-array.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/dma-buf/dma-fence-array.c
+++ b/drivers/dma-buf/dma-fence-array.c
@@ -104,7 +104,11 @@ static bool dma_fence_array_signaled(str
{
struct dma_fence_array *array = to_dma_fence_array(fence);
- return atomic_read(&array->num_pending) <= 0;
+ if (atomic_read(&array->num_pending) > 0)
+ return false;
+
+ dma_fence_array_clear_pending_error(array);
+ return true;
}
static void dma_fence_array_release(struct dma_fence *fence)
From: Alexander Stein <[email protected]>
[ Upstream commit 95d35256b564aca33fb661eac77dc94bfcffc8df ]
Fix the schema warning: "spi-flash@0: $nodename:0: 'spi-flash@0' does
not match '^flash(@.*)?$'" from jedec,spi-nor.yaml
Fixes: a084eaf3096c ("arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node")
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 4f33820aba1f1..a84ed3578425e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -607,7 +607,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
- mx25u64: spi-flash@0 {
+ mx25u64: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 5a1b2725558f8a3b4cbf0504f53cffae8e163034 ]
## `if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG) {` case
The intel-aero atomisp has `#if defined(IS_ISP_2400_SYSTEM)` [1]. It is
to be defined in the following two places [2]:
- css/hive_isp_css_common/system_global.h
- css/css_2401_csi2p_system/system_global.h
and the former file is to be included on ISP2400 devices, too. So, it
is to be defined for both ISP2400 and ISP2401 devices.
Because the upstreamed atomisp driver now supports only ISP2400 and
ISP2401, just remove the ISP version test again. This matches the other
upstream commits like 3c0538fbad9f ("media: atomisp: get rid of most
checks for ISP2401 version").
While here, moved the comment for define GP_ISEL_TPG_MODE to the
appropriate place.
[1] https://github.com/intel-aero/linux-kernel/blob/a1b673258feb915268377275130c5c5df0eafc82/drivers/media/pci/atomisp/css/sh_css.c#L552-L558
[2] https://github.com/intel-aero/linux-kernel/search?q=IS_ISP_2400_SYSTEM
## `isys_stream_descr->polling_mode` case
This does not exist on the intel-aero atomisp. This is because it is
based on css version irci_stable_candrpv_0415_20150521_0458.
On the other hand, the upstreamed atomisp is based on the following css
version depending on the ISP version using ifdefs:
- ISP2400: irci_stable_candrpv_0415_20150521_0458
- ISP2401: irci_master_20150911_0724
The `isys_stream_descr->polling_mode` usage was added on updating css
version to irci_master_20150701_0213 [3].
So, it is not a ISP version specific thing, but css version specific
thing. Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, re-add the ISP version check for now.
I say "for now" because ISP2401 should eventually use the same css
version with ISP2400 (i.e., irci_stable_candrpv_0415_20150521_0458)
[3] https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")
Link to Intel's Android kernel patch.
## `coord = &me->config.internal_frame_origin_bqs_on_sctbl;` case
it was added on commit 4f744a573db3 ("media: atomisp: make
sh_css_sp_init_pipeline() ISP version independent") for ISP2401. Because
the upstreamed atomisp for the ISP2401 part is based on
irci_master_20150911_0724, hence the difference.
Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, revert the test back to `if (IS_ISP2401)`.
Fixes: 27333dadef57 ("media: atomisp: adjust some code at sh_css that could be broken")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/sh_css.c | 27 +++++++++-------------
1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css.c b/drivers/staging/media/atomisp/pci/sh_css.c
index c4b35cbab3737..ba25d0da8b811 100644
--- a/drivers/staging/media/atomisp/pci/sh_css.c
+++ b/drivers/staging/media/atomisp/pci/sh_css.c
@@ -522,6 +522,7 @@ ia_css_stream_input_format_bits_per_pixel(struct ia_css_stream *stream)
return bpp;
}
+/* TODO: move define to proper file in tools */
#define GP_ISEL_TPG_MODE 0x90058
#if !defined(ISP2401)
@@ -573,12 +574,8 @@ sh_css_config_input_network(struct ia_css_stream *stream)
vblank_cycles = vblank_lines * (width + hblank_cycles);
sh_css_sp_configure_sync_gen(width, height, hblank_cycles,
vblank_cycles);
- if (!IS_ISP2401) {
- if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG) {
- /* TODO: move define to proper file in tools */
- ia_css_device_store_uint32(GP_ISEL_TPG_MODE, 0);
- }
- }
+ if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG)
+ ia_css_device_store_uint32(GP_ISEL_TPG_MODE, 0);
}
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
"sh_css_config_input_network() leave:\n");
@@ -1009,16 +1006,14 @@ static bool sh_css_translate_stream_cfg_to_isys_stream_descr(
* ia_css_isys_stream_capture_indication() instead of
* ia_css_pipeline_sp_wait_for_isys_stream_N() as isp processing of
* capture takes longer than getting an ISYS frame
- *
- * Only 2401 relevant ??
*/
-#if 0 // FIXME: NOT USED on Yocto Aero
- isys_stream_descr->polling_mode
- = early_polling ? INPUT_SYSTEM_POLL_ON_CAPTURE_REQUEST
- : INPUT_SYSTEM_POLL_ON_WAIT_FOR_FRAME;
- ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
- "sh_css_translate_stream_cfg_to_isys_stream_descr() leave:\n");
-#endif
+ if (IS_ISP2401) {
+ isys_stream_descr->polling_mode
+ = early_polling ? INPUT_SYSTEM_POLL_ON_CAPTURE_REQUEST
+ : INPUT_SYSTEM_POLL_ON_WAIT_FOR_FRAME;
+ ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
+ "sh_css_translate_stream_cfg_to_isys_stream_descr() leave:\n");
+ }
return rc;
}
@@ -1433,7 +1428,7 @@ static void start_pipe(
assert(me); /* all callers are in this file and call with non null argument */
- if (!IS_ISP2401) {
+ if (IS_ISP2401) {
coord = &me->config.internal_frame_origin_bqs_on_sctbl;
params = me->stream->isp_params_configs;
}
--
2.34.1
From: Suresh Udipi <[email protected]>
[ Upstream commit cee44d4fbacbbdfe62697ec94e76c6e4f726c5df ]
hsfreqrange should be chosen based on the calculated mbps which
is closer to the default bit rate and within the range as per
table[1]. But current calculation always selects first value which
is greater than or equal to the calculated mbps which may lead
to chosing a wrong range in some cases.
For example for 360 mbps for H3/M3N
Existing logic selects
Calculated value 360Mbps : Default 400Mbps Range [368.125 -433.125 mbps]
This hsfreqrange is out of range.
The logic is changed to get the default value which is closest to the
calculated value [1]
Calculated value 360Mbps : Default 350Mbps Range [320.625 -380.625 mpbs]
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]
Please note that According to Renesas in Table 25.9 the range for
220 default value is corrected as below
|Range (Mbps) | Default Bit rate (Mbps) |
-----------------------------------------------
| 197.125-244.125 | 220 |
-----------------------------------------------
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <[email protected]>
Signed-off-by: Kazuyoshi Akiyama <[email protected]>
Signed-off-by: Michael Rodin <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index ba4a380016cc4..3de782a908659 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -445,16 +445,23 @@ static int rcsi2_wait_phy_start(struct rcar_csi2 *priv,
static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
{
const struct rcsi2_mbps_reg *hsfreq;
+ const struct rcsi2_mbps_reg *hsfreq_prev = NULL;
- for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++)
+ for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++) {
if (hsfreq->mbps >= mbps)
break;
+ hsfreq_prev = hsfreq;
+ }
if (!hsfreq->mbps) {
dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps);
return -ERANGE;
}
+ if (hsfreq_prev &&
+ ((mbps - hsfreq_prev->mbps) <= (hsfreq->mbps - mbps)))
+ hsfreq = hsfreq_prev;
+
rcsi2_write(priv, PHYPLL_REG, PHYPLL_HSFREQRANGE(hsfreq->reg));
return 0;
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit ce3015b7212e96db426d0c36f80fd159c91155d1 ]
After the commit 9832e155f1ed ("[media] media-device: split media
initialization and registration"), calling media_device_cleanup()
is needed it seems. However, currently it is missing for the module
unload path.
Note that for the probe failure path, it is already added in
atomisp_register_entities().
This patch adds the missing call of media_device_cleanup() in
atomisp_unregister_entities().
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index 1e324f1f656e5..0511c454e769d 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -1182,6 +1182,7 @@ static void atomisp_unregister_entities(struct atomisp_device *isp)
v4l2_device_unregister(&isp->v4l2_dev);
media_device_unregister(&isp->media_dev);
+ media_device_cleanup(&isp->media_dev);
}
static int atomisp_register_entities(struct atomisp_device *isp)
--
2.34.1
From: Dillon Min <[email protected]>
[ Upstream commit b046049e59dca5e5830dc75ed16acf7657a95161 ]
Since the compatible string defined from ilitek,ili9341.yaml is
"st,sf-tc240t-9370-t", "ilitek,ili9341"
so, append "ilitek,ili9341" to avoid the below dtbs_check warning.
arch/arm/boot/dts/stm32f429-disco.dt.yaml: display@1: compatible:
['st,sf-tc240t-9370-t'] is too short
Fixes: a726e2f000ec ("ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board")
Signed-off-by: Dillon Min <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32f429-disco.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 075ac57d0bf4a..6435e099c6326 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -192,7 +192,7 @@
display: display@1{
/* Connect panel-ilitek-9341 to ltdc */
- compatible = "st,sf-tc240t-9370-t";
+ compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
reg = <1>;
spi-3wire;
spi-max-frequency = <10000000>;
--
2.34.1
From: Aya Levin <[email protected]>
[ Upstream commit 01c3fd113ef50490ffd43f78f347ef6bb008510b ]
This reverts commit 54e1217b90486c94b26f24dcee1ee5ef5372f832.
Although the NIC doesn't support offload of outer header CSUM, using
gso_partial_features allows offloading the tunnel's segmentation. The
driver relies on the stack CSUM calculation of the outer header. For
this, NETIF_F_GSO_GRE_CSUM must be a member of the device's features.
Fixes: 54e1217b9048 ("net/mlx5e: Block offload of outer header csum for GRE tunnel")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index a0bf3d386b708..f075bb8ccd00d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4495,9 +4495,12 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
}
if (mlx5e_tunnel_proto_supported_tx(mdev, IPPROTO_GRE)) {
- netdev->hw_features |= NETIF_F_GSO_GRE;
- netdev->hw_enc_features |= NETIF_F_GSO_GRE;
- netdev->gso_partial_features |= NETIF_F_GSO_GRE;
+ netdev->hw_features |= NETIF_F_GSO_GRE |
+ NETIF_F_GSO_GRE_CSUM;
+ netdev->hw_enc_features |= NETIF_F_GSO_GRE |
+ NETIF_F_GSO_GRE_CSUM;
+ netdev->gso_partial_features |= NETIF_F_GSO_GRE |
+ NETIF_F_GSO_GRE_CSUM;
}
if (mlx5e_tunnel_proto_supported_tx(mdev, IPPROTO_IPIP)) {
--
2.34.1
From: Sean Wang <[email protected]>
[ Upstream commit 2363b6a646b65a207345b9a9024dff0eff3fec44 ]
offload_flags have to be dropped for mt7921 because mt76.omac_idx 0 would
always run as station mode that would cause Tx encapsulation setting
is not applied to mac80211.
Also, drop IEEE80211_OFFLOAD_ENCAP_4ADDR too because it is not really
being supported.
Fixes: e0f9fdda81bd ("mt76: mt7921: add ieee80211_ops")
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 63ec140c9c372..9eb90e6f01031 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -285,12 +285,6 @@ static int mt7921_add_interface(struct ieee80211_hw *hw,
mtxq->wcid = &mvif->sta.wcid;
}
- if (vif->type != NL80211_IFTYPE_AP &&
- (!mvif->mt76.omac_idx || mvif->mt76.omac_idx > 3))
- vif->offload_flags = 0;
-
- vif->offload_flags |= IEEE80211_OFFLOAD_ENCAP_4ADDR;
-
out:
mt7921_mutex_release(dev);
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 10371b6212bb682f13247733d6b76b91b2b80f9a ]
If we're going to cap "eng_grp->g->engs_num" upper bounds then we should
cap the lower bounds as well.
Fixes: 43ac0b824f1c ("crypto: octeontx2 - load microcode and create engine groups")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
index dff34b3ec09e1..7c1b92aaab398 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
@@ -29,7 +29,8 @@ static struct otx2_cpt_bitmap get_cores_bmap(struct device *dev,
bool found = false;
int i;
- if (eng_grp->g->engs_num > OTX2_CPT_MAX_ENGINES) {
+ if (eng_grp->g->engs_num < 0 ||
+ eng_grp->g->engs_num > OTX2_CPT_MAX_ENGINES) {
dev_err(dev, "unsupported number of engines %d on octeontx2\n",
eng_grp->g->engs_num);
return bmap;
--
2.34.1
From: Aya Levin <[email protected]>
[ Upstream commit 64050cdad0983ad8060e33c3f4b5aee2366bcebd ]
This reverts commit 6d6727dddc7f93fcc155cb8d0c49c29ae0e71122.
Although the NIC doesn't support offload of outer header CSUM, using
gso_partial_features allows offloading the tunnel's segmentation. The
driver relies on the stack CSUM calculation of the outer header. For
this, NETIF_F_GSO_UDP_TUNNEL_CSUM must be a member of the device's
features.
Fixes: 6d6727dddc7f ("net/mlx5e: Block offload of outer header csum for UDP tunnels")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index baa0d7d48fc0c..a0bf3d386b708 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4485,9 +4485,13 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
}
if (mlx5_vxlan_allowed(mdev->vxlan) || mlx5_geneve_tx_allowed(mdev)) {
- netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
- netdev->hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL;
- netdev->vlan_features |= NETIF_F_GSO_UDP_TUNNEL;
+ netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->vlan_features |= NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_UDP_TUNNEL_CSUM;
}
if (mlx5e_tunnel_proto_supported_tx(mdev, IPPROTO_GRE)) {
--
2.34.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 6c7a388b62366f0de9936db3c1921d7f4e0011bc ]
Linking fails when dma-buf is disabled:
ld.lld: error: undefined symbol: dma_fence_release
>>> referenced by fence.c
>>> gpu/host1x/fence.o:(host1x_syncpt_fence_enable_signaling) in archive drivers/built-in.a
>>> referenced by fence.c
>>> gpu/host1x/fence.o:(host1x_fence_signal) in archive drivers/built-in.a
>>> referenced by fence.c
>>> gpu/host1x/fence.o:(do_fence_timeout) in archive drivers/built-in.a
Fixes: 687db2207b1b ("gpu: host1x: Add DMA fence implementation")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/host1x/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/host1x/Kconfig b/drivers/gpu/host1x/Kconfig
index 6dab94adf25e5..6815b4db17c1b 100644
--- a/drivers/gpu/host1x/Kconfig
+++ b/drivers/gpu/host1x/Kconfig
@@ -2,6 +2,7 @@
config TEGRA_HOST1X
tristate "NVIDIA Tegra host1x driver"
depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
+ select DMA_SHARED_BUFFER
select IOMMU_IOVA
help
Driver for the NVIDIA Tegra host1x hardware.
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit c195438f1e84de8fa46b4f5264d12379bee6e9a1 ]
In case of failures brcmuart_probe() always returned -ENODEV, this
isn't correct for example platform_get_irq_byname() may return
-EPROBE_DEFER to handle such cases propagate error codes in
brcmuart_probe() in case of failures.
Fixes: 41a469482de25 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_bcm7271.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 5163d60756b73..0877cf24f7de0 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1076,14 +1076,18 @@ static int brcmuart_probe(struct platform_device *pdev)
priv->rx_bufs = dma_alloc_coherent(dev,
priv->rx_size,
&priv->rx_addr, GFP_KERNEL);
- if (!priv->rx_bufs)
+ if (!priv->rx_bufs) {
+ ret = -EINVAL;
goto err;
+ }
priv->tx_size = UART_XMIT_SIZE;
priv->tx_buf = dma_alloc_coherent(dev,
priv->tx_size,
&priv->tx_addr, GFP_KERNEL);
- if (!priv->tx_buf)
+ if (!priv->tx_buf) {
+ ret = -EINVAL;
goto err;
+ }
}
ret = serial8250_register_8250_port(&up);
@@ -1097,6 +1101,7 @@ static int brcmuart_probe(struct platform_device *pdev)
if (priv->dma_enabled) {
dma_irq = platform_get_irq_byname(pdev, "dma");
if (dma_irq < 0) {
+ ret = dma_irq;
dev_err(dev, "no IRQ resource info\n");
goto err1;
}
@@ -1116,7 +1121,7 @@ err1:
err:
brcmuart_free_bufs(dev, priv);
brcmuart_arbitration(priv, 0);
- return -ENODEV;
+ return ret;
}
static int brcmuart_remove(struct platform_device *pdev)
--
2.34.1
From: Xin Xiong <[email protected]>
[ Upstream commit d94a69cb2cfa77294921aae9afcfb866e723a2da ]
The issue takes place in one error path of clusterip_tg_check(). When
memcmp() returns nonzero, the function simply returns the error code,
forgetting to decrease the reference count of a clusterip_config
object, which is bumped earlier by clusterip_config_find_get(). This
may incur reference count leak.
Fix this issue by decrementing the refcount of the object in specific
error path.
Fixes: 06aa151ad1fc74 ("netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set")
Signed-off-by: Xin Xiong <[email protected]>
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/netfilter/ipt_CLUSTERIP.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index 8fd1aba8af31c..b518f20c9a244 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -520,8 +520,11 @@ static int clusterip_tg_check(const struct xt_tgchk_param *par)
if (IS_ERR(config))
return PTR_ERR(config);
}
- } else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN))
+ } else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN)) {
+ clusterip_config_entry_put(config);
+ clusterip_config_put(config);
return -EINVAL;
+ }
ret = nf_ct_netns_get(par->net, par->family);
if (ret < 0) {
--
2.34.1
From: Pavel Begunkov <[email protected]>
[ Upstream commit e840b4baf3cfb37e2ead4f649a45bb78178677ff ]
Before updating a poll request we should remove it from poll queues,
including the double poll entry.
Fixes: b69de288e913 ("io_uring: allow events and user_data update of running poll requests")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/ac39e7f80152613603b8a6cc29a2b6063ac2434f.1639605189.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io_uring.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 0006fc7479ca3..ecffeddf90c68 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -5925,6 +5925,7 @@ static int io_poll_update(struct io_kiocb *req, unsigned int issue_flags)
* update those. For multishot, if we're racing with completion, just
* let completion re-add it.
*/
+ io_poll_remove_double(preq);
completing = !__io_poll_remove_one(preq, &preq->poll, false);
if (completing && (preq->poll.events & EPOLLONESHOT)) {
ret = -EALREADY;
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 2e81948177d769106754085c3e03534e6cc1f623 ]
As the possible alloc failure of devm_kcalloc(), it could return null
pointer.
Therefore, 'strings' should be checked and return NULL if alloc fails to
prevent the dereference of the NULL pointer.
Also, the caller should also deal with the return value of the
gb_generate_enum_strings() and return -ENOMEM if returns NULL.
Moreover, because the memory allocated with devm_kzalloc() will be
freed automatically when the last reference to the device is dropped,
the 'gbe' in gbaudio_tplg_create_enum_kctl() and
gbaudio_tplg_create_enum_ctl() do not need to free manually.
But the 'control' in gbaudio_tplg_create_widget() and
gbaudio_tplg_process_kcontrols() has a specially error handle to
cleanup.
So it should be better to cleanup 'control' when fails.
Fixes: e65579e335da ("greybus: audio: topology: Enable enumerated control support")
Reviewed-by: Alex Elder <[email protected]>
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/greybus/audio_topology.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/staging/greybus/audio_topology.c b/drivers/staging/greybus/audio_topology.c
index 7f7d558b76d04..62d7674852bec 100644
--- a/drivers/staging/greybus/audio_topology.c
+++ b/drivers/staging/greybus/audio_topology.c
@@ -147,6 +147,9 @@ static const char **gb_generate_enum_strings(struct gbaudio_module_info *gb,
items = le32_to_cpu(gbenum->items);
strings = devm_kcalloc(gb->dev, items, sizeof(char *), GFP_KERNEL);
+ if (!strings)
+ return NULL;
+
data = gbenum->names;
for (i = 0; i < items; i++) {
@@ -655,6 +658,8 @@ static int gbaudio_tplg_create_enum_kctl(struct gbaudio_module_info *gb,
/* since count=1, and reg is dummy */
gbe->items = le32_to_cpu(gb_enum->items);
gbe->texts = gb_generate_enum_strings(gb, gb_enum);
+ if (!gbe->texts)
+ return -ENOMEM;
/* debug enum info */
dev_dbg(gb->dev, "Max:%d, name_length:%d\n", gbe->items,
@@ -862,6 +867,8 @@ static int gbaudio_tplg_create_enum_ctl(struct gbaudio_module_info *gb,
/* since count=1, and reg is dummy */
gbe->items = le32_to_cpu(gb_enum->items);
gbe->texts = gb_generate_enum_strings(gb, gb_enum);
+ if (!gbe->texts)
+ return -ENOMEM;
/* debug enum info */
dev_dbg(gb->dev, "Max:%d, name_length:%d\n", gbe->items,
@@ -1072,6 +1079,10 @@ static int gbaudio_tplg_create_widget(struct gbaudio_module_info *module,
csize += le16_to_cpu(gbenum->names_length);
control->texts = (const char * const *)
gb_generate_enum_strings(module, gbenum);
+ if (!control->texts) {
+ ret = -ENOMEM;
+ goto error;
+ }
control->items = le32_to_cpu(gbenum->items);
} else {
csize = sizeof(struct gb_audio_control);
@@ -1181,6 +1192,10 @@ static int gbaudio_tplg_process_kcontrols(struct gbaudio_module_info *module,
csize += le16_to_cpu(gbenum->names_length);
control->texts = (const char * const *)
gb_generate_enum_strings(module, gbenum);
+ if (!control->texts) {
+ ret = -ENOMEM;
+ goto error;
+ }
control->items = le32_to_cpu(gbenum->items);
} else {
csize = sizeof(struct gb_audio_control);
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 977d2e7c63c3d04d07ba340b39987742e3241554 ]
In nonstatic_find_mem_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().
Fix this bug by adding a check of res.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pcmcia/rsrc_nonstatic.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 827ca6e9ee54a..1cac528707111 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -812,6 +812,9 @@ static struct resource *nonstatic_find_mem_region(u_long base, u_long num,
unsigned long min, max;
int ret, i, j;
+ if (!res)
+ return NULL;
+
low = low || !(s->features & SS_CAP_PAGE_REGS);
data.mask = align - 1;
--
2.34.1
From: Wen Gu <[email protected]>
[ Upstream commit 36595d8ad46d9e4c41cc7c48c4405b7c3322deac ]
SMC connections might fail to be registered in a link group due to
unable to find a usable link during its creation. As a result,
smc_conn_create() will return a failure and most resources related
to the connection won't be applied or initialized, such as
conn->abort_work or conn->lnk.
If smc_conn_free() is invoked later, it will try to access the
uninitialized resources related to the connection, thus causing
a warning or crash.
This patch tries to fix this by resetting conn->lgr to NULL if an
abnormal exit occurs in smc_lgr_register_conn(), thus avoiding the
access to uninitialized resources in smc_conn_free().
Meanwhile, the new created link group should be terminated if smc
connections can't be registered in it. So smc_lgr_cleanup_early() is
modified to take care of link group only and invoked to terminate
unusable link group by smc_conn_create(). The call to smc_conn_free()
is moved out from smc_lgr_cleanup_early() to smc_conn_abort().
Fixes: 56bc3b2094b4 ("net/smc: assign link to a new connection")
Suggested-by: Karsten Graul <[email protected]>
Signed-off-by: Wen Gu <[email protected]>
Acked-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/af_smc.c | 8 +++++---
net/smc/smc_core.c | 12 +++++++-----
net/smc/smc_core.h | 2 +-
3 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index eea6d4a854e90..07ff719f39077 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -613,10 +613,12 @@ static int smc_connect_decline_fallback(struct smc_sock *smc, int reason_code,
static void smc_conn_abort(struct smc_sock *smc, int local_first)
{
+ struct smc_connection *conn = &smc->conn;
+ struct smc_link_group *lgr = conn->lgr;
+
+ smc_conn_free(conn);
if (local_first)
- smc_lgr_cleanup_early(&smc->conn);
- else
- smc_conn_free(&smc->conn);
+ smc_lgr_cleanup_early(lgr);
}
/* check if there is a rdma device available for this connection. */
diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index 506b8498623b0..79d5e6a90845d 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -170,8 +170,10 @@ static int smc_lgr_register_conn(struct smc_connection *conn, bool first)
if (!conn->lgr->is_smcd) {
rc = smcr_lgr_conn_assign_link(conn, first);
- if (rc)
+ if (rc) {
+ conn->lgr = NULL;
return rc;
+ }
}
/* find a new alert_token_local value not yet used by some connection
* in this link group
@@ -579,15 +581,13 @@ int smcd_nl_get_lgr(struct sk_buff *skb, struct netlink_callback *cb)
return skb->len;
}
-void smc_lgr_cleanup_early(struct smc_connection *conn)
+void smc_lgr_cleanup_early(struct smc_link_group *lgr)
{
- struct smc_link_group *lgr = conn->lgr;
spinlock_t *lgr_lock;
if (!lgr)
return;
- smc_conn_free(conn);
smc_lgr_list_head(lgr, &lgr_lock);
spin_lock_bh(lgr_lock);
/* do not use this link group for new connections */
@@ -1750,8 +1750,10 @@ create:
write_lock_bh(&lgr->conns_lock);
rc = smc_lgr_register_conn(conn, true);
write_unlock_bh(&lgr->conns_lock);
- if (rc)
+ if (rc) {
+ smc_lgr_cleanup_early(lgr);
goto out;
+ }
}
conn->local_tx_ctrl.common.type = SMC_CDC_MSG_TYPE;
conn->local_tx_ctrl.len = SMC_WR_TX_SIZE;
diff --git a/net/smc/smc_core.h b/net/smc/smc_core.h
index 51a3e8248ade2..9a0523f4c7ba6 100644
--- a/net/smc/smc_core.h
+++ b/net/smc/smc_core.h
@@ -419,7 +419,7 @@ static inline void smc_set_pci_values(struct pci_dev *pci_dev,
struct smc_sock;
struct smc_clc_msg_accept_confirm;
-void smc_lgr_cleanup_early(struct smc_connection *conn);
+void smc_lgr_cleanup_early(struct smc_link_group *lgr);
void smc_lgr_terminate_sched(struct smc_link_group *lgr);
void smcr_port_add(struct smc_ib_device *smcibdev, u8 ibport);
void smcr_port_err(struct smc_ib_device *smcibdev, u8 ibport);
--
2.34.1
From: Robert Marko <[email protected]>
[ Upstream commit effd42600b987c1e95f946b14fefc1c7639e7439 ]
CN9130 has one CP115 built in, which like the CP110 has 2 GPIO and 2 SPI
controllers built-in.
However, unlike the Armada 7k and 8k the SoC DTSI doesn't add the required
aliases as both the Orion SPI driver and MVEBU GPIO drivers require the
aliases to be present.
So add the required aliases for GPIO and SPI controllers.
Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/marvell/cn9130.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi
index a2b7e5ec979d3..71769ac7f0585 100644
--- a/arch/arm64/boot/dts/marvell/cn9130.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -11,6 +11,13 @@
model = "Marvell Armada CN9130 SoC";
compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
"marvell,armada-ap807";
+
+ aliases {
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ };
};
/*
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit 92cb1bedde9dba78d802fe2510949743a2581aed ]
Commit 739b4e7756d3 ("drm/msm/dsi: Fix an error code in
msm_dsi_modeset_init()") changed msm_dsi_modeset_init() to return an
error code in case msm_dsi_manager_validate_current_config() returns
false. However this is not an error case, but a slave DSI of the bonded
DSI link. In this case msm_dsi_modeset_init() should return 0, but just
skip connector and bridge initialization.
To reduce possible confusion, drop the
msm_dsi_manager_validate_current_config() function, and specif 'bonded
&& !master' condition directly in the msm_dsi_modeset_init().
Fixes: 739b4e7756d3 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dsi/dsi.c | 10 +++++++---
drivers/gpu/drm/msm/dsi/dsi.h | 1 -
drivers/gpu/drm/msm/dsi/dsi_manager.c | 17 -----------------
3 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c
index 75ae3008b68f4..fc280cc434943 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.c
+++ b/drivers/gpu/drm/msm/dsi/dsi.c
@@ -215,9 +215,13 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev,
goto fail;
}
- if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) {
- ret = -EINVAL;
- goto fail;
+ if (msm_dsi_is_bonded_dsi(msm_dsi) &&
+ !msm_dsi_is_master_dsi(msm_dsi)) {
+ /*
+ * Do not return an eror here,
+ * Just skip creating encoder/connector for the slave-DSI.
+ */
+ return 0;
}
msm_dsi->encoder = encoder;
diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 569c8ff062ba4..a63666e59d19e 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -82,7 +82,6 @@ int msm_dsi_manager_cmd_xfer(int id, const struct mipi_dsi_msg *msg);
bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len);
int msm_dsi_manager_register(struct msm_dsi *msm_dsi);
void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi);
-bool msm_dsi_manager_validate_current_config(u8 id);
void msm_dsi_manager_tpg_enable(void);
/* msm dsi */
diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index fb4ccffdcfe13..fa4c396df6a92 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -647,23 +647,6 @@ fail:
return ERR_PTR(ret);
}
-bool msm_dsi_manager_validate_current_config(u8 id)
-{
- bool is_bonded_dsi = IS_BONDED_DSI();
-
- /*
- * For bonded DSI, we only have one drm panel. For this
- * use case, we register only one bridge/connector.
- * Skip bridge/connector initialisation if it is
- * slave-DSI for bonded DSI configuration.
- */
- if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) {
- DBG("Skip bridge registration for slave DSI->id: %d\n", id);
- return false;
- }
- return true;
-}
-
/* initialize bridge */
struct drm_bridge *msm_dsi_manager_bridge_init(u8 id)
{
--
2.34.1
From: Maor Dickman <[email protected]>
[ Upstream commit 9e72a55a3c9d54b38a704bb7292d984574a81d9d ]
Routes with nexthop objects is currently not supported by multipath offload
and any attempts to use it is blocked, however this also block adding SW
routes with nexthop.
Resolve this by returning NOTIFY_DONE instead of an error which will allow such
a route to be created in SW but not offloaded.
This fix also solve an issue which block adding such routes on different devices
due to missing check if the route FIB device is one of multipath devices.
Fixes: 6a87afc072c3 ("mlx5: Fail attempts to use routes with nexthop objects")
Signed-off-by: Maor Dickman <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
index 21fdaf708f1fe..30282d86e6b96 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
@@ -268,10 +268,8 @@ static int mlx5_lag_fib_event(struct notifier_block *nb,
fen_info = container_of(info, struct fib_entry_notifier_info,
info);
fi = fen_info->fi;
- if (fi->nh) {
- NL_SET_ERR_MSG_MOD(info->extack, "IPv4 route with nexthop objects is not supported");
- return notifier_from_errno(-EINVAL);
- }
+ if (fi->nh)
+ return NOTIFY_DONE;
fib_dev = fib_info_nh(fen_info->fi, 0)->fib_nh_dev;
if (fib_dev != ldev->pf[MLX5_LAG_P1].netdev &&
fib_dev != ldev->pf[MLX5_LAG_P2].netdev) {
--
2.34.1
From: Maor Dickman <[email protected]>
[ Upstream commit 07f6dc4024ea1d2314b9c8b81fd4e492864fcca1 ]
Currently during NIC profile disablement all VXLAN udp ports offloaded to the
HW are flushed and during its enablement the driver send notification to
the stack to inform the core that the entire UDP tunnel port state has been
lost, uplink representor doesn't have the same behavior which can cause
VXLAN udp ports offload to be in bad state while moving between modes while
VXLAN interface exist.
Fixed by aligning the uplink representor profile behavior to the NIC behavior.
Fixes: 84db66124714 ("net/mlx5e: Move set vxlan nic info to profile init")
Signed-off-by: Maor Dickman <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index edecd149dcab3..161b60e1139b3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -50,6 +50,7 @@
#include "fs_core.h"
#include "lib/mlx5.h"
#include "lib/devcom.h"
+#include "lib/vxlan.h"
#define CREATE_TRACE_POINTS
#include "diag/en_rep_tracepoint.h"
#include "en_accel/ipsec.h"
@@ -1016,6 +1017,7 @@ static void mlx5e_uplink_rep_enable(struct mlx5e_priv *priv)
rtnl_lock();
if (netif_running(netdev))
mlx5e_open(netdev);
+ udp_tunnel_nic_reset_ntf(priv->netdev);
netif_device_attach(netdev);
rtnl_unlock();
}
@@ -1037,6 +1039,7 @@ static void mlx5e_uplink_rep_disable(struct mlx5e_priv *priv)
mlx5_notifier_unregister(mdev, &priv->events_nb);
mlx5e_rep_tc_disable(priv);
mlx5_lag_remove_netdev(mdev, priv->netdev);
+ mlx5_vxlan_reset_to_default(mdev->vxlan);
}
static MLX5E_DEFINE_STATS_GRP(sw_rep, 0);
--
2.34.1
From: Vladimir Oltean <[email protected]>
[ Upstream commit a14e6b69f393d651913edcbe4ec0dec27b8b4b40 ]
Assuming the test setup described here:
https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
(swp1 and swp2 are in bond0, and bond0 is in a bridge with swp0)
it can be seen that when swp1 goes down (on either board A or B), then
traffic that should go through that port isn't forwarded anywhere.
A dump of the PGID table shows the following:
PGID_DST[0] = ports 0
PGID_DST[1] = ports 1
PGID_DST[2] = ports 2
PGID_DST[3] = ports 3
PGID_DST[4] = ports 4
PGID_DST[5] = ports 5
PGID_DST[6] = no ports
PGID_AGGR[0] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[1] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[2] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[3] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[4] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[5] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[6] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[7] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[8] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[9] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[10] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[11] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[12] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[13] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[14] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[15] = ports 0, 1, 2, 3, 4, 5
PGID_SRC[0] = ports 1, 2
PGID_SRC[1] = ports 0
PGID_SRC[2] = ports 0
PGID_SRC[3] = no ports
PGID_SRC[4] = no ports
PGID_SRC[5] = no ports
PGID_SRC[6] = ports 0, 1, 2, 3, 4, 5
Whereas a "good" PGID configuration for that setup should have looked
like this:
PGID_DST[0] = ports 0
PGID_DST[1] = ports 1, 2
PGID_DST[2] = ports 1, 2
PGID_DST[3] = ports 3
PGID_DST[4] = ports 4
PGID_DST[5] = ports 5
PGID_DST[6] = no ports
PGID_AGGR[0] = ports 0, 2, 3, 4, 5
PGID_AGGR[1] = ports 0, 2, 3, 4, 5
PGID_AGGR[2] = ports 0, 2, 3, 4, 5
PGID_AGGR[3] = ports 0, 2, 3, 4, 5
PGID_AGGR[4] = ports 0, 2, 3, 4, 5
PGID_AGGR[5] = ports 0, 2, 3, 4, 5
PGID_AGGR[6] = ports 0, 2, 3, 4, 5
PGID_AGGR[7] = ports 0, 2, 3, 4, 5
PGID_AGGR[8] = ports 0, 2, 3, 4, 5
PGID_AGGR[9] = ports 0, 2, 3, 4, 5
PGID_AGGR[10] = ports 0, 2, 3, 4, 5
PGID_AGGR[11] = ports 0, 2, 3, 4, 5
PGID_AGGR[12] = ports 0, 2, 3, 4, 5
PGID_AGGR[13] = ports 0, 2, 3, 4, 5
PGID_AGGR[14] = ports 0, 2, 3, 4, 5
PGID_AGGR[15] = ports 0, 2, 3, 4, 5
PGID_SRC[0] = ports 1, 2
PGID_SRC[1] = ports 0
PGID_SRC[2] = ports 0
PGID_SRC[3] = no ports
PGID_SRC[4] = no ports
PGID_SRC[5] = no ports
PGID_SRC[6] = ports 0, 1, 2, 3, 4, 5
In other words, in the "bad" configuration, the attempt is to remove the
inactive swp1 from the destination ports via PGID_DST. But when a MAC
table entry is learned, it is learned towards PGID_DST 1, because that
is the logical port id of the LAG itself (it is equal to the lowest
numbered member port). So when swp1 becomes inactive, if we set
PGID_DST[1] to contain just swp1 and not swp2, the packet will not have
any chance to reach the destination via swp2.
The "correct" way to remove swp1 as a destination is via PGID_AGGR
(remove swp1 from the aggregation port groups for all aggregation
codes). This means that PGID_DST[1] and PGID_DST[2] must still contain
both swp1 and swp2. This makes the MAC table still treat packets
destined towards the single-port LAG as "multicast", and the inactive
ports are removed via the aggregation code tables.
The change presented here is a design one: the ocelot_get_bond_mask()
function used to take an "only_active_ports" argument. We don't need
that. The only call site that specifies only_active_ports=true,
ocelot_set_aggr_pgids(), must retrieve the entire bonding mask, because
it must program that into PGID_DST. Additionally, it must also clear the
inactive ports from the bond mask here, which it can't do if bond_mask
just contains the active ports:
ac = ocelot_read_rix(ocelot, ANA_PGID_PGID, i);
ac &= ~bond_mask; <---- here
/* Don't do division by zero if there was no active
* port. Just make all aggregation codes zero.
*/
if (num_active_ports)
ac |= BIT(aggr_idx[i % num_active_ports]);
ocelot_write_rix(ocelot, ac, ANA_PGID_PGID, i);
So it becomes the responsibility of ocelot_set_aggr_pgids() to take
ocelot_port->lag_tx_active into consideration when populating the
aggr_idx array.
Fixes: 23ca3b727ee6 ("net: mscc: ocelot: rebalance LAGs on link up/down events")
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 00b5e6860bf69..0ee34a0c7683e 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1302,8 +1302,7 @@ int ocelot_get_ts_info(struct ocelot *ocelot, int port,
}
EXPORT_SYMBOL(ocelot_get_ts_info);
-static u32 ocelot_get_bond_mask(struct ocelot *ocelot, struct net_device *bond,
- bool only_active_ports)
+static u32 ocelot_get_bond_mask(struct ocelot *ocelot, struct net_device *bond)
{
u32 mask = 0;
int port;
@@ -1314,12 +1313,8 @@ static u32 ocelot_get_bond_mask(struct ocelot *ocelot, struct net_device *bond,
if (!ocelot_port)
continue;
- if (ocelot_port->bond == bond) {
- if (only_active_ports && !ocelot_port->lag_tx_active)
- continue;
-
+ if (ocelot_port->bond == bond)
mask |= BIT(port);
- }
}
return mask;
@@ -1406,10 +1401,8 @@ void ocelot_apply_bridge_fwd_mask(struct ocelot *ocelot)
mask = ocelot_get_bridge_fwd_mask(ocelot, port, bridge);
mask |= cpu_fwd_mask;
mask &= ~BIT(port);
- if (bond) {
- mask &= ~ocelot_get_bond_mask(ocelot, bond,
- false);
- }
+ if (bond)
+ mask &= ~ocelot_get_bond_mask(ocelot, bond);
} else {
/* Standalone ports forward only to DSA tag_8021q CPU
* ports (if those exist), or to the hardware CPU port
@@ -1727,13 +1720,17 @@ static void ocelot_set_aggr_pgids(struct ocelot *ocelot)
if (!bond || (visited & BIT(lag)))
continue;
- bond_mask = ocelot_get_bond_mask(ocelot, bond, true);
+ bond_mask = ocelot_get_bond_mask(ocelot, bond);
for_each_set_bit(port, &bond_mask, ocelot->num_phys_ports) {
+ struct ocelot_port *ocelot_port = ocelot->ports[port];
+
// Destination mask
ocelot_write_rix(ocelot, bond_mask,
ANA_PGID_PGID, port);
- aggr_idx[num_active_ports++] = port;
+
+ if (ocelot_port->lag_tx_active)
+ aggr_idx[num_active_ports++] = port;
}
for_each_aggr_pgid(ocelot, i) {
@@ -1782,8 +1779,7 @@ static void ocelot_setup_logical_port_ids(struct ocelot *ocelot)
bond = ocelot_port->bond;
if (bond) {
- int lag = __ffs(ocelot_get_bond_mask(ocelot, bond,
- false));
+ int lag = __ffs(ocelot_get_bond_mask(ocelot, bond));
ocelot_rmw_gix(ocelot,
ANA_PORT_PORT_CFG_PORTID_VAL(lag),
--
2.34.1
From: Subbaraya Sundeep <[email protected]>
[ Upstream commit 93440f4888cf049dbd22b41aaf94d2e2153b3eb8 ]
Before using the ptp pci device by AF driver increment
the reference count of it.
Fixes: a8b90c9d26d6 ("octeontx2-af: Add PTP device id for CN10K and 95O silcons")
Signed-off-by: Subbaraya Sundeep <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index 9b8e59f4c206d..77cb52b80c60f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -85,6 +85,8 @@ struct ptp *ptp_get(void)
/* Check driver is bound to PTP block */
if (!ptp)
ptp = ERR_PTR(-EPROBE_DEFER);
+ else
+ pci_dev_get(ptp->pdev);
return ptp;
}
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit ab50cb9df8896b39aae65c537a30de2c79c19735 ]
In radeon_driver_open_kms(), radeon_vm_bo_add() is assigned to
vm->ib_bo_va and passes and used in radeon_vm_bo_set_addr(). In
radeon_vm_bo_set_addr(), there is a dereference of vm->ib_bo_va,
which could lead to a NULL pointer dereference on failure of
radeon_vm_bo_add().
Fix this bug by adding a check of vm->ib_bo_va.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DRM_RADEON=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: cc9e67e3d700 ("drm/radeon: fix VM IB handling")
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_kms.c | 36 ++++++++++++++++-------------
1 file changed, 20 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 482fb0ae6cb5d..66aee48fd09d2 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -648,6 +648,8 @@ void radeon_driver_lastclose_kms(struct drm_device *dev)
int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
{
struct radeon_device *rdev = dev->dev_private;
+ struct radeon_fpriv *fpriv;
+ struct radeon_vm *vm;
int r;
file_priv->driver_priv = NULL;
@@ -660,8 +662,6 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
/* new gpu have virtual address space support */
if (rdev->family >= CHIP_CAYMAN) {
- struct radeon_fpriv *fpriv;
- struct radeon_vm *vm;
fpriv = kzalloc(sizeof(*fpriv), GFP_KERNEL);
if (unlikely(!fpriv)) {
@@ -672,35 +672,39 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
if (rdev->accel_working) {
vm = &fpriv->vm;
r = radeon_vm_init(rdev, vm);
- if (r) {
- kfree(fpriv);
- goto out_suspend;
- }
+ if (r)
+ goto out_fpriv;
r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false);
- if (r) {
- radeon_vm_fini(rdev, vm);
- kfree(fpriv);
- goto out_suspend;
- }
+ if (r)
+ goto out_vm_fini;
/* map the ib pool buffer read only into
* virtual address space */
vm->ib_bo_va = radeon_vm_bo_add(rdev, vm,
rdev->ring_tmp_bo.bo);
+ if (!vm->ib_bo_va) {
+ r = -ENOMEM;
+ goto out_vm_fini;
+ }
+
r = radeon_vm_bo_set_addr(rdev, vm->ib_bo_va,
RADEON_VA_IB_OFFSET,
RADEON_VM_PAGE_READABLE |
RADEON_VM_PAGE_SNOOPED);
- if (r) {
- radeon_vm_fini(rdev, vm);
- kfree(fpriv);
- goto out_suspend;
- }
+ if (r)
+ goto out_vm_fini;
}
file_priv->driver_priv = fpriv;
}
+ if (!r)
+ goto out_suspend;
+
+out_vm_fini:
+ radeon_vm_fini(rdev, vm);
+out_fpriv:
+ kfree(fpriv);
out_suspend:
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
--
2.34.1
From: Herbert Xu <[email protected]>
[ Upstream commit 3d6b661330a7954d8136df98160d525eb04dcd6a ]
We should not call pm_runtime_resume_and_get where the reference
count is expected to be incremented unconditionally. This patch
reverts these calls to the original unconditional get_sync call.
Reported-by: Heiner Kallweit <[email protected]>
Fixes: 747bf30fd944 ("crypto: stm32/cryp - Fix PM reference leak...")
Fixes: 1cb3ad701970 ("crypto: stm32/hash - Fix PM reference leak...")
Signed-off-by: Herbert Xu <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 3 ++-
drivers/crypto/stm32/stm32-hash.c | 6 +++---
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index cd57c5bae3ce9..81eb136b6c11d 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -529,7 +529,8 @@ static int stm32_cryp_hw_init(struct stm32_cryp *cryp)
{
int ret;
u32 cfg, hw_mode;
- pm_runtime_resume_and_get(cryp->dev);
+
+ pm_runtime_get_sync(cryp->dev);
/* Disable interrupt */
stm32_cryp_write(cryp, CRYP_IMSCR, 0);
diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index 389de9e3302d5..d33006d43f761 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -813,7 +813,7 @@ static void stm32_hash_finish_req(struct ahash_request *req, int err)
static int stm32_hash_hw_init(struct stm32_hash_dev *hdev,
struct stm32_hash_request_ctx *rctx)
{
- pm_runtime_resume_and_get(hdev->dev);
+ pm_runtime_get_sync(hdev->dev);
if (!(HASH_FLAGS_INIT & hdev->flags)) {
stm32_hash_write(hdev, HASH_CR, HASH_CR_INIT);
@@ -962,7 +962,7 @@ static int stm32_hash_export(struct ahash_request *req, void *out)
u32 *preg;
unsigned int i;
- pm_runtime_resume_and_get(hdev->dev);
+ pm_runtime_get_sync(hdev->dev);
while ((stm32_hash_read(hdev, HASH_SR) & HASH_SR_BUSY))
cpu_relax();
@@ -1000,7 +1000,7 @@ static int stm32_hash_import(struct ahash_request *req, const void *in)
preg = rctx->hw_context;
- pm_runtime_resume_and_get(hdev->dev);
+ pm_runtime_get_sync(hdev->dev);
stm32_hash_write(hdev, HASH_IMR, *preg++);
stm32_hash_write(hdev, HASH_STR, *preg++);
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 4e84139e14af5ea60772cc4f33d7059aec76e0eb ]
On a 32-bit build, the (unsigned long long) casts throw warnings
(or errors) due to being to a different integer size. Cast to
uintptr_t first (with the __force for sparse) and then further
to get the consistent print on 32 and 64-bit.
Fixes: ca2e334232b6 ("lib: add iomem emulation (logic_iomem)")
Reported-by: Al Viro <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/logic_iomem.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/lib/logic_iomem.c b/lib/logic_iomem.c
index 9bdfde0c0f86d..54fa601f3300b 100644
--- a/lib/logic_iomem.c
+++ b/lib/logic_iomem.c
@@ -79,7 +79,7 @@ static void __iomem *real_ioremap(phys_addr_t offset, size_t size)
static void real_iounmap(void __iomem *addr)
{
WARN(1, "invalid iounmap for addr 0x%llx\n",
- (unsigned long long __force)addr);
+ (unsigned long long)(uintptr_t __force)addr);
}
#endif /* CONFIG_LOGIC_IOMEM_FALLBACK */
@@ -173,7 +173,7 @@ EXPORT_SYMBOL(iounmap);
static u##sz real_raw_read ## op(const volatile void __iomem *addr) \
{ \
WARN(1, "Invalid read" #op " at address %llx\n", \
- (unsigned long long __force)addr); \
+ (unsigned long long)(uintptr_t __force)addr); \
return (u ## sz)~0ULL; \
} \
\
@@ -181,7 +181,8 @@ static void real_raw_write ## op(u ## sz val, \
volatile void __iomem *addr) \
{ \
WARN(1, "Invalid writeq" #op " of 0x%llx at address %llx\n", \
- (unsigned long long)val, (unsigned long long __force)addr);\
+ (unsigned long long)val, \
+ (unsigned long long)(uintptr_t __force)addr);\
} \
MAKE_FALLBACK(b, 8);
@@ -194,14 +195,14 @@ MAKE_FALLBACK(q, 64);
static void real_memset_io(volatile void __iomem *addr, int value, size_t size)
{
WARN(1, "Invalid memset_io at address 0x%llx\n",
- (unsigned long long __force)addr);
+ (unsigned long long)(uintptr_t __force)addr);
}
static void real_memcpy_fromio(void *buffer, const volatile void __iomem *addr,
size_t size)
{
WARN(1, "Invalid memcpy_fromio at address 0x%llx\n",
- (unsigned long long __force)addr);
+ (unsigned long long)(uintptr_t __force)addr);
memset(buffer, 0xff, size);
}
@@ -210,7 +211,7 @@ static void real_memcpy_toio(volatile void __iomem *addr, const void *buffer,
size_t size)
{
WARN(1, "Invalid memcpy_toio at address 0x%llx\n",
- (unsigned long long __force)addr);
+ (unsigned long long)(uintptr_t __force)addr);
}
#endif /* CONFIG_LOGIC_IOMEM_FALLBACK */
--
2.34.1
From: Michal Suchanek <[email protected]>
[ Upstream commit 358fcf5ddbec4e6706405847d6a666f5933a6c25 ]
When the kernel is locked down the kernel allows reading only debugfs
files with mode 444. Mode 400 is also valid but is not allowed.
Make the 444 into a mask.
Fixes: 5496197f9b08 ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Michal Suchanek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/debugfs/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 7d162b0efbf03..950c63fa4d0b2 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -147,7 +147,7 @@ static int debugfs_locked_down(struct inode *inode,
struct file *filp,
const struct file_operations *real_fops)
{
- if ((inode->i_mode & 07777) == 0444 &&
+ if ((inode->i_mode & 07777 & ~0444) == 0 &&
!(filp->f_mode & FMODE_WRITE) &&
!real_fops->unlocked_ioctl &&
!real_fops->compat_ioctl &&
--
2.34.1
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 77bed755e0f06135faccdd3948863703f9a6e640 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_threaded_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_threaded_irq() with the
invalid IRQ #s.
Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
Signed-off-by: Sergey Shtylyov <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/meson-mx-sdhc-mmc.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c
index 8fdd0bbbfa21f..28aa78aa08f3f 100644
--- a/drivers/mmc/host/meson-mx-sdhc-mmc.c
+++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c
@@ -854,6 +854,11 @@ static int meson_mx_sdhc_probe(struct platform_device *pdev)
goto err_disable_pclk;
irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_pclk;
+ }
+
ret = devm_request_threaded_irq(dev, irq, meson_mx_sdhc_irq,
meson_mx_sdhc_irq_thread, IRQF_ONESHOT,
NULL, host);
--
2.34.1
From: Paolo Abeni <[email protected]>
[ Upstream commit f7d6a237d7422809d458d754016de2844017cb4d ]
Since full-mesh endpoint support, the reception of a single ADD_ADDR
option can cause multiple subflows creation. When such option is
accepted we increment 'add_addr_accepted' by one. When we received
a paired RM_ADDR option, we deleted all the relevant subflows,
decrementing 'add_addr_accepted' by one for each of them.
We have a similar issue for 'local_addr_used'
Fix them moving the pm endpoint accounting outside the subflow
traversal.
Fixes: 1a0d6136c5f0 ("mptcp: local addresses fullmesh")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mptcp/pm_netlink.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c
index b79251a36dcbc..d96860053816a 100644
--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -710,6 +710,8 @@ static void mptcp_pm_nl_rm_addr_or_subflow(struct mptcp_sock *msk,
return;
for (i = 0; i < rm_list->nr; i++) {
+ bool removed = false;
+
list_for_each_entry_safe(subflow, tmp, &msk->conn_list, node) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
int how = RCV_SHUTDOWN | SEND_SHUTDOWN;
@@ -729,15 +731,19 @@ static void mptcp_pm_nl_rm_addr_or_subflow(struct mptcp_sock *msk,
mptcp_close_ssk(sk, ssk, subflow);
spin_lock_bh(&msk->pm.lock);
- if (rm_type == MPTCP_MIB_RMADDR) {
- msk->pm.add_addr_accepted--;
- WRITE_ONCE(msk->pm.accept_addr, true);
- } else if (rm_type == MPTCP_MIB_RMSUBFLOW) {
- msk->pm.local_addr_used--;
- }
+ removed = true;
msk->pm.subflows--;
__MPTCP_INC_STATS(sock_net(sk), rm_type);
}
+ if (!removed)
+ continue;
+
+ if (rm_type == MPTCP_MIB_RMADDR) {
+ msk->pm.add_addr_accepted--;
+ WRITE_ONCE(msk->pm.accept_addr, true);
+ } else if (rm_type == MPTCP_MIB_RMSUBFLOW) {
+ msk->pm.local_addr_used--;
+ }
}
}
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit 72b1e360572f9fa7d08ee554f1da29abce23f288 ]
Make sure we free CAN network device in the error path. There are
several jumps to fail label after allocating the CAN network device
successfully. This patch places the free_candev() under fail label so
that in failure path a jump to fail label frees the CAN network
device.
Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family")
Link: https://lore.kernel.org/all/[email protected]
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/rcar/rcar_canfd.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index ff9d0f5ae0dd2..388521e70837f 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1640,8 +1640,7 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
ndev = alloc_candev(sizeof(*priv), RCANFD_FIFO_DEPTH);
if (!ndev) {
dev_err(&pdev->dev, "alloc_candev() failed\n");
- err = -ENOMEM;
- goto fail;
+ return -ENOMEM;
}
priv = netdev_priv(ndev);
@@ -1735,8 +1734,8 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
fail_candev:
netif_napi_del(&priv->napi);
- free_candev(ndev);
fail:
+ free_candev(ndev);
return err;
}
--
2.34.1
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit 6f59f991b4e735323f099ac6490e725ae8c750a5 ]
This make use of hci_dev_test_and_{set,clear}_flag instead of doing 2
operations in a row.
Fixes: cbbdfa6f33198 ("Bluetooth: Enable controller RPA resolution using Experimental feature")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/mgmt.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index d7306c1ffbef5..f09f0a78eb7be 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3919,10 +3919,10 @@ static int set_zero_key_func(struct sock *sk, struct hci_dev *hdev,
#endif
if (hdev && use_ll_privacy(hdev) && !hdev_is_powered(hdev)) {
- bool changed = hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY);
-
- hci_dev_clear_flag(hdev, HCI_ENABLE_LL_PRIVACY);
+ bool changed;
+ changed = hci_dev_test_and_clear_flag(hdev,
+ HCI_ENABLE_LL_PRIVACY);
if (changed)
exp_ll_privacy_feature_changed(false, hdev, sk);
}
@@ -4017,15 +4017,15 @@ static int set_rpa_resolution_func(struct sock *sk, struct hci_dev *hdev,
val = !!cp->param[0];
if (val) {
- changed = !hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY);
- hci_dev_set_flag(hdev, HCI_ENABLE_LL_PRIVACY);
+ changed = !hci_dev_test_and_set_flag(hdev,
+ HCI_ENABLE_LL_PRIVACY);
hci_dev_clear_flag(hdev, HCI_ADVERTISING);
/* Enable LL privacy + supported settings changed */
flags = BIT(0) | BIT(1);
} else {
- changed = hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY);
- hci_dev_clear_flag(hdev, HCI_ENABLE_LL_PRIVACY);
+ changed = hci_dev_test_and_clear_flag(hdev,
+ HCI_ENABLE_LL_PRIVACY);
/* Disable LL privacy + supported settings changed */
flags = BIT(1);
--
2.34.1
From: Kurt Kanzenbach <[email protected]>
[ Upstream commit 4db4c3ea56978086ca367a355e440de17d534827 ]
The insertion of static FDB entries ignores the pass_blocked bit. That bit is
evaluated with regards to STP. Add the missing functionality.
Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/hirschmann/hellcreek.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 354655f9ed003..2afd6a4f02b88 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -710,8 +710,9 @@ static int __hellcreek_fdb_add(struct hellcreek *hellcreek,
u16 meta = 0;
dev_dbg(hellcreek->dev, "Add static FDB entry: MAC=%pM, MASK=0x%02x, "
- "OBT=%d, REPRIO_EN=%d, PRIO=%d\n", entry->mac, entry->portmask,
- entry->is_obt, entry->reprio_en, entry->reprio_tc);
+ "OBT=%d, PASS_BLOCKED=%d, REPRIO_EN=%d, PRIO=%d\n", entry->mac,
+ entry->portmask, entry->is_obt, entry->pass_blocked,
+ entry->reprio_en, entry->reprio_tc);
/* Add mac address */
hellcreek_write(hellcreek, entry->mac[1] | (entry->mac[0] << 8), HR_FDBWDH);
@@ -722,6 +723,8 @@ static int __hellcreek_fdb_add(struct hellcreek *hellcreek,
meta |= entry->portmask << HR_FDBWRM0_PORTMASK_SHIFT;
if (entry->is_obt)
meta |= HR_FDBWRM0_OBT;
+ if (entry->pass_blocked)
+ meta |= HR_FDBWRM0_PASS_BLOCKED;
if (entry->reprio_en) {
meta |= HR_FDBWRM0_REPRIO_EN;
meta |= entry->reprio_tc << HR_FDBWRM0_REPRIO_TC_SHIFT;
--
2.34.1
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 3bd9d8ce6f8c5c43ee2f1106021db0f98882cc75 ]
This patch adds the missing newline to printed strings.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index e16dc482f3270..63613c186f173 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2625,7 +2625,7 @@ static int mcp251xfd_register_chip_detect(struct mcp251xfd_priv *priv)
if (!mcp251xfd_is_251X(priv) &&
priv->devtype_data.model != devtype_data->model) {
netdev_info(ndev,
- "Detected %s, but firmware specifies a %s. Fixing up.",
+ "Detected %s, but firmware specifies a %s. Fixing up.\n",
__mcp251xfd_get_model_str(devtype_data->model),
mcp251xfd_get_model_str(priv));
}
@@ -2662,7 +2662,7 @@ static int mcp251xfd_register_check_rx_int(struct mcp251xfd_priv *priv)
return 0;
netdev_info(priv->ndev,
- "RX_INT active after softreset, disabling RX_INT support.");
+ "RX_INT active after softreset, disabling RX_INT support.\n");
devm_gpiod_put(&priv->spi->dev, priv->rx_int);
priv->rx_int = NULL;
--
2.34.1
From: Daniel Golle <[email protected]>
[ Upstream commit eda80b249df7bbc7b3dd13907343a3e59bfc57fd ]
Instead of returning -1 (-EPERM) when MDIO bus is stuck busy
while writing or 0xffff if it happens while reading, return the
appropriate -ETIMEDOUT. Also fix return type to int instead of u32.
Refactor functions to use bitfield helpers instead of having various
masking and shifting constants in the code, which also results in the
register definitions in the header file being more obviously related
to what is stated in the MediaTek's Reference Manual.
Fixes: 656e705243fd0 ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 53 ++++++++++++---------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 16 +++++--
2 files changed, 41 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 398c23cec8151..9e7a872426fc4 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -91,46 +91,53 @@ static int mtk_mdio_busy_wait(struct mtk_eth *eth)
}
dev_err(eth->dev, "mdio: MDIO timeout\n");
- return -1;
+ return -ETIMEDOUT;
}
-static u32 _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr,
- u32 phy_register, u32 write_data)
+static int _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr, u32 phy_reg,
+ u32 write_data)
{
- if (mtk_mdio_busy_wait(eth))
- return -1;
+ int ret;
- write_data &= 0xffff;
+ ret = mtk_mdio_busy_wait(eth);
+ if (ret < 0)
+ return ret;
- mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START | PHY_IAC_WRITE |
- (phy_register << PHY_IAC_REG_SHIFT) |
- (phy_addr << PHY_IAC_ADDR_SHIFT) | write_data,
+ mtk_w32(eth, PHY_IAC_ACCESS |
+ PHY_IAC_START_C22 |
+ PHY_IAC_CMD_WRITE |
+ PHY_IAC_REG(phy_reg) |
+ PHY_IAC_ADDR(phy_addr) |
+ PHY_IAC_DATA(write_data),
MTK_PHY_IAC);
- if (mtk_mdio_busy_wait(eth))
- return -1;
+ ret = mtk_mdio_busy_wait(eth);
+ if (ret < 0)
+ return ret;
return 0;
}
-static u32 _mtk_mdio_read(struct mtk_eth *eth, int phy_addr, int phy_reg)
+static int _mtk_mdio_read(struct mtk_eth *eth, u32 phy_addr, u32 phy_reg)
{
- u32 d;
+ int ret;
- if (mtk_mdio_busy_wait(eth))
- return 0xffff;
+ ret = mtk_mdio_busy_wait(eth);
+ if (ret < 0)
+ return ret;
- mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START | PHY_IAC_READ |
- (phy_reg << PHY_IAC_REG_SHIFT) |
- (phy_addr << PHY_IAC_ADDR_SHIFT),
+ mtk_w32(eth, PHY_IAC_ACCESS |
+ PHY_IAC_START_C22 |
+ PHY_IAC_CMD_C22_READ |
+ PHY_IAC_REG(phy_reg) |
+ PHY_IAC_ADDR(phy_addr),
MTK_PHY_IAC);
- if (mtk_mdio_busy_wait(eth))
- return 0xffff;
-
- d = mtk_r32(eth, MTK_PHY_IAC) & 0xffff;
+ ret = mtk_mdio_busy_wait(eth);
+ if (ret < 0)
+ return ret;
- return d;
+ return mtk_r32(eth, MTK_PHY_IAC) & PHY_IAC_DATA_MASK;
}
static int mtk_mdio_write(struct mii_bus *bus, int phy_addr,
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 5ef70dd8b49c6..f2d90639d7ed1 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -341,11 +341,17 @@
/* PHY Indirect Access Control registers */
#define MTK_PHY_IAC 0x10004
#define PHY_IAC_ACCESS BIT(31)
-#define PHY_IAC_READ BIT(19)
-#define PHY_IAC_WRITE BIT(18)
-#define PHY_IAC_START BIT(16)
-#define PHY_IAC_ADDR_SHIFT 20
-#define PHY_IAC_REG_SHIFT 25
+#define PHY_IAC_REG_MASK GENMASK(29, 25)
+#define PHY_IAC_REG(x) FIELD_PREP(PHY_IAC_REG_MASK, (x))
+#define PHY_IAC_ADDR_MASK GENMASK(24, 20)
+#define PHY_IAC_ADDR(x) FIELD_PREP(PHY_IAC_ADDR_MASK, (x))
+#define PHY_IAC_CMD_MASK GENMASK(19, 18)
+#define PHY_IAC_CMD_WRITE FIELD_PREP(PHY_IAC_CMD_MASK, 1)
+#define PHY_IAC_CMD_C22_READ FIELD_PREP(PHY_IAC_CMD_MASK, 2)
+#define PHY_IAC_START_MASK GENMASK(17, 16)
+#define PHY_IAC_START_C22 FIELD_PREP(PHY_IAC_START_MASK, 1)
+#define PHY_IAC_DATA_MASK GENMASK(15, 0)
+#define PHY_IAC_DATA(x) FIELD_PREP(PHY_IAC_DATA_MASK, (x))
#define PHY_IAC_TIMEOUT HZ
#define MTK_MAC_MISC 0x1000c
--
2.34.1
From: Wayne Lin <[email protected]>
[ Upstream commit 4bef85d4c9491415b7931407b07f24841c1e0390 ]
[Why]
crc_rd_wrk shouldn't be null in crc_win_update_set(). Current programming
logic is inconsistent in crc_win_update_set().
[How]
Initially, return if crc_rd_wrk is NULL. Later on, we can use member of
crc_rd_wrk safely.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Fixes: 9a65df193108 ("drm/amd/display: Use PSP TA to read out crc")
Reviewed-by: Rodrigo Siqueira <[email protected]>
Acked-by: Pavle Kotarac <[email protected]>
Signed-off-by: Wayne Lin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index de9ec5ddb6c72..e94ddd5e7b638 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -2908,10 +2908,13 @@ static int crc_win_update_set(void *data, u64 val)
struct amdgpu_device *adev = drm_to_adev(new_crtc->dev);
struct crc_rd_work *crc_rd_wrk = adev->dm.crc_rd_wrk;
+ if (!crc_rd_wrk)
+ return 0;
+
if (val) {
spin_lock_irq(&adev_to_drm(adev)->event_lock);
spin_lock_irq(&crc_rd_wrk->crc_rd_work_lock);
- if (crc_rd_wrk && crc_rd_wrk->crtc) {
+ if (crc_rd_wrk->crtc) {
old_crtc = crc_rd_wrk->crtc;
old_acrtc = to_amdgpu_crtc(old_crtc);
}
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 2b70d4f9b20635ac328836e50d183632e1930f94 ]
The "opt" variable is a u32, but on some paths only the top bytes
were initialized and the others contained random stack data.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 251017c69ab7f..d2c6785205992 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -903,6 +903,8 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
struct l2cap_conn *conn;
int len, err = 0;
u32 opt;
+ u16 mtu;
+ u8 mode;
BT_DBG("sk %p", sk);
@@ -1085,16 +1087,16 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
break;
}
- if (copy_from_sockptr(&opt, optval, sizeof(u16))) {
+ if (copy_from_sockptr(&mtu, optval, sizeof(u16))) {
err = -EFAULT;
break;
}
if (chan->mode == L2CAP_MODE_EXT_FLOWCTL &&
sk->sk_state == BT_CONNECTED)
- err = l2cap_chan_reconfigure(chan, opt);
+ err = l2cap_chan_reconfigure(chan, mtu);
else
- chan->imtu = opt;
+ chan->imtu = mtu;
break;
@@ -1116,14 +1118,14 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
break;
}
- if (copy_from_sockptr(&opt, optval, sizeof(u8))) {
+ if (copy_from_sockptr(&mode, optval, sizeof(u8))) {
err = -EFAULT;
break;
}
- BT_DBG("opt %u", opt);
+ BT_DBG("mode %u", mode);
- err = l2cap_set_mode(chan, opt);
+ err = l2cap_set_mode(chan, mode);
if (err)
break;
--
2.34.1
From: Maor Dickman <[email protected]>
[ Upstream commit 885751eb1b01d276e38f57d78c583e4ce006c5ed ]
Creating routes with nexthop objects while in switchdev mode leads to access to
un-allocated memory and trigger bellow call trace due to hitting WARN_ON.
This is caused due to illegal usage of fib_info_nh in TC tunnel FIB event handling to
resolve the FIB device while fib_info built in with nexthop.
Fixed by ignoring attempts to use nexthop objects with routes until support can be
properly added.
WARNING: CPU: 1 PID: 1724 at include/net/nexthop.h:468 mlx5e_tc_tun_fib_event+0x448/0x570 [mlx5_core]
CPU: 1 PID: 1724 Comm: ip Not tainted 5.15.0_for_upstream_min_debug_2021_11_09_02_04 #1
RIP: 0010:mlx5e_tc_tun_fib_event+0x448/0x570 [mlx5_core]
RSP: 0018:ffff8881349f7910 EFLAGS: 00010202
RAX: ffff8881492f1980 RBX: ffff8881349f79e8 RCX: 0000000000000000
RDX: ffff8881349f79e8 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8881349f7950 R08: 00000000000000fe R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88811e9d0000
R13: ffff88810eb62000 R14: ffff888106710268 R15: 0000000000000018
FS: 00007f1d5ca6e800(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffedba44ff8 CR3: 0000000129808004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
atomic_notifier_call_chain+0x42/0x60
call_fib_notifiers+0x21/0x40
fib_table_insert+0x479/0x6d0
? try_charge_memcg+0x480/0x6d0
inet_rtm_newroute+0x65/0xb0
rtnetlink_rcv_msg+0x2af/0x360
? page_add_file_rmap+0x13/0x130
? do_set_pte+0xcd/0x120
? rtnl_calcit.isra.0+0x120/0x120
netlink_rcv_skb+0x4e/0xf0
netlink_unicast+0x1ee/0x2b0
netlink_sendmsg+0x22e/0x460
sock_sendmsg+0x33/0x40
____sys_sendmsg+0x1d1/0x1f0
___sys_sendmsg+0xab/0xf0
? __mod_memcg_lruvec_state+0x40/0x60
? __mod_lruvec_page_state+0x95/0xd0
? page_add_new_anon_rmap+0x4e/0xf0
? __handle_mm_fault+0xec6/0x1470
__sys_sendmsg+0x51/0x90
? internal_get_user_pages_fast+0x480/0xa10
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 8914add2c9e5 ("net/mlx5e: Handle FIB events to update tunnel endpoint device")
Signed-off-by: Maor Dickman <[email protected]>
Reviewed-by: Vlad Buslov <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c
index ec0163d75dd25..700c463ea3679 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c
@@ -1544,6 +1544,8 @@ mlx5e_init_fib_work_ipv4(struct mlx5e_priv *priv,
struct net_device *fib_dev;
fen_info = container_of(info, struct fib_entry_notifier_info, info);
+ if (fen_info->fi->nh)
+ return NULL;
fib_dev = fib_info_nh(fen_info->fi, 0)->fib_nh_dev;
if (!fib_dev || fib_dev->netdev_ops != &mlx5e_netdev_ops ||
fen_info->dst_len != 32)
--
2.34.1
From: John Fastabend <[email protected]>
[ Upstream commit 5b2c5540b8110eea0d67a78fb0ddb9654c58daeb ]
Applications can be confused slightly because we do not always return the
same error code as expected, e.g. what the TCP stack normally returns. For
example on a sock err sk->sk_err instead of returning the sock_error we
return EAGAIN. This usually means the application will 'try again'
instead of aborting immediately. Another example, when a shutdown event
is received we should immediately abort instead of waiting for data when
the user provides a timeout.
These tend to not be fatal, applications usually recover, but introduces
bogus errors to the user or introduces unexpected latency. Before
'c5d2177a72a16' we fell back to the TCP stack when no data was available
so we managed to catch many of the cases here, although with the extra
latency cost of calling tcp_msg_wait_data() first.
To fix lets duplicate the error handling in TCP stack into tcp_bpf so
that we get the same error codes.
These were found in our CI tests that run applications against sockmap
and do longer lived testing, at least compared to test_sockmap that
does short-lived ping/pong tests, and in some of our test clusters
we deploy.
Its non-trivial to do these in a shorter form CI tests that would be
appropriate for BPF selftests, but we are looking into it so we can
ensure this keeps working going forward. As a preview one idea is to
pull in the packetdrill testing which catches some of this.
Fixes: c5d2177a72a16 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_bpf.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index f70aa0932bd6c..9b9b02052fd36 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -196,12 +196,39 @@ msg_bytes_ready:
long timeo;
int data;
+ if (sock_flag(sk, SOCK_DONE))
+ goto out;
+
+ if (sk->sk_err) {
+ copied = sock_error(sk);
+ goto out;
+ }
+
+ if (sk->sk_shutdown & RCV_SHUTDOWN)
+ goto out;
+
+ if (sk->sk_state == TCP_CLOSE) {
+ copied = -ENOTCONN;
+ goto out;
+ }
+
timeo = sock_rcvtimeo(sk, nonblock);
+ if (!timeo) {
+ copied = -EAGAIN;
+ goto out;
+ }
+
+ if (signal_pending(current)) {
+ copied = sock_intr_errno(timeo);
+ goto out;
+ }
+
data = tcp_msg_wait_data(sk, psock, timeo);
if (data && !sk_psock_queue_empty(psock))
goto msg_bytes_ready;
copied = -EAGAIN;
}
+out:
release_sock(sk);
sk_psock_put(sk, psock);
return copied;
--
2.34.1
From: Matthieu Baerts <[email protected]>
[ Upstream commit 04fac2cae9422a3401c172571afbcfdd58fa5c7e ]
When these two options had to be sent -- which is not common -- the DSS
size was not being taken into account in the remaining size.
Additionally in this situation, the reported size was only the one of
the MP_FAIL which can cause issue if at the end, we need to write more
in the TCP options than previously said.
Here we use a dedicated variable for MP_FAIL size to keep the
WARN_ON_ONCE() just after.
Fixes: c25aeb4e0953 ("mptcp: MP_FAIL suboption sending")
Acked-and-tested-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mptcp/options.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index 0966855a7c251..f69a1cadb13fc 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -823,10 +823,13 @@ bool mptcp_established_options(struct sock *sk, struct sk_buff *skb,
if (mptcp_established_options_mp(sk, skb, snd_data_fin, &opt_size, remaining, opts))
ret = true;
else if (mptcp_established_options_dss(sk, skb, snd_data_fin, &opt_size, remaining, opts)) {
+ unsigned int mp_fail_size;
+
ret = true;
- if (mptcp_established_options_mp_fail(sk, &opt_size, remaining, opts)) {
- *size += opt_size;
- remaining -= opt_size;
+ if (mptcp_established_options_mp_fail(sk, &mp_fail_size,
+ remaining - opt_size, opts)) {
+ *size += opt_size + mp_fail_size;
+ remaining -= opt_size - mp_fail_size;
return true;
}
}
--
2.34.1
From: Igor Pylypiv <[email protected]>
[ Upstream commit 606c54ae975ad3af540b505b46b55a687501711f ]
Starting from commit 05c6c029a44d ("scsi: pm80xx: Increase number of
supported queues") driver initializes only max_q_num queues. Do not use an
invalid queue if the WARN_ON condition is true.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 7640e1eb8c5d ("scsi: pm80xx: Make mpi_build_cmd locking consistent")
Reviewed-by: Vishakha Channapattan <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 639b7e38a1947..880e1f356defc 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1325,7 +1325,9 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
int q_index = circularQ - pm8001_ha->inbnd_q_tbl;
int rv;
- WARN_ON(q_index >= PM8001_MAX_INB_NUM);
+ if (WARN_ON(q_index >= pm8001_ha->max_q_num))
+ return -EINVAL;
+
spin_lock_irqsave(&circularQ->iq_lock, flags);
rv = pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
&pMessage);
--
2.34.1
From: Dominik Brodowski <[email protected]>
[ Upstream commit fbb3485f1f931102d8ba606f1c28123f5b48afa3 ]
We need to set TASK_INTERRUPTIBLE before calling kthread_should_stop().
Otherwise, kthread_stop() might see that the pccardd thread is still
in TASK_RUNNING state and fail to wake it up.
Additionally, we only need to set the state back to TASK_RUNNING if
kthread_should_stop() breaks the loop.
Cc: Greg Kroah-Hartman <[email protected]>
Reported-by: Al Viro <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Fixes: d3046ba809ce ("pcmcia: fix a boot time warning in pcmcia cs code")
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pcmcia/cs.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index e211e2619680c..f70197154a362 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -666,18 +666,16 @@ static int pccardd(void *__skt)
if (events || sysfs_events)
continue;
+ set_current_state(TASK_INTERRUPTIBLE);
if (kthread_should_stop())
break;
- set_current_state(TASK_INTERRUPTIBLE);
-
schedule();
- /* make sure we are running */
- __set_current_state(TASK_RUNNING);
-
try_to_freeze();
}
+ /* make sure we are running before we exit */
+ __set_current_state(TASK_RUNNING);
/* shut down socket, if a device is still present */
if (skt->state & SOCKET_PRESENT) {
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit 27527a3d3b162e4512798c058c0e8a216c721187 ]
Make sure we check the return value of pm_genpd_init() which might fail.
Also add a devres action to remove the power-domain in-case the probe
callback fails further down in the code flow.
Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/renesas/rzg2l-cpg.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index 761922ea5db76..61e7c0c4f3794 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -638,10 +638,16 @@ static void rzg2l_cpg_detach_dev(struct generic_pm_domain *unused, struct device
pm_clk_destroy(dev);
}
+static void rzg2l_cpg_genpd_remove(void *data)
+{
+ pm_genpd_remove(data);
+}
+
static int __init rzg2l_cpg_add_clk_domain(struct device *dev)
{
struct device_node *np = dev->of_node;
struct generic_pm_domain *genpd;
+ int ret;
genpd = devm_kzalloc(dev, sizeof(*genpd), GFP_KERNEL);
if (!genpd)
@@ -652,7 +658,13 @@ static int __init rzg2l_cpg_add_clk_domain(struct device *dev)
GENPD_FLAG_ACTIVE_WAKEUP;
genpd->attach_dev = rzg2l_cpg_attach_dev;
genpd->detach_dev = rzg2l_cpg_detach_dev;
- pm_genpd_init(genpd, &pm_domain_always_on_gov, false);
+ ret = pm_genpd_init(genpd, &pm_domain_always_on_gov, false);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, rzg2l_cpg_genpd_remove, genpd);
+ if (ret)
+ return ret;
of_genpd_add_provider_simple(np, genpd);
return 0;
--
2.34.1
From: Thomas Gleixner <[email protected]>
[ Upstream commit 6dd21ad81bf96478db3403b1bbe251c0612d0431 ]
HDA uses a timecounter to read a hardware clock running at 24 MHz. The
conversion factor is set with a mult value of 125 and a shift value of 0,
which is not converting the hardware clock to nanoseconds, it is converting
to 1/3 nanoseconds because the conversion factor from 24Mhz to nanoseconds
is 125/3. The usage sites divide the "nanoseconds" value returned by
timecounter_read() by 3 to get a real nanoseconds value.
There is a lengthy comment in azx_timecounter_init() explaining this
choice. That comment makes blatantly wrong assumptions about how
timecounters work and what can overflow.
The comment says:
* Applying the 1/3 factor as part of the multiplication
* requires at least 20 bits for a decent precision, however
* overflows occur after about 4 hours or less, not a option.
timecounters operate on time deltas between two readouts of a clock and use
the mult/shift pair to calculate a precise nanoseconds value:
delta_nsec = (delta_clock * mult) >> shift;
The fractional part is also taken into account and preserved to prevent
accumulated rounding errors. For details see cyclecounter_cyc2ns().
The mult/shift pair has to be chosen so that the multiplication of the
maximum expected delta value does not result in a 64bit overflow. As the
counter wraps around on 32bit, the maximum observable delta between two
reads is (1 << 32) - 1 which is about 178.9 seconds.
That in turn means the maximum multiplication factor which fits into an u32
will not cause a 64bit overflow ever because it's guaranteed that:
((1 << 32) - 1) ^ 2 < (1 << 64)
The resulting correct multiplication factor is 2796202667 and the shift
value is 26, i.e. 26 bit precision. The overflow of the multiplication
would happen exactly at a clock readout delta of 6597069765 which is way
after the wrap around of the hardware clock at around 274.8 seconds which
is off from the claimed 4 hours by more than an order of magnitude.
If the counter ever wraps around the last read value then the calculation
is off by the number of wrap arounds times 178.9 seconds because the
overflow cannot be observed.
Use clocks_calc_mult_shift(), which calculates the most accurate mult/shift
pair based on the given clock frequency, and remove the bogus comment along
with the divisions at the readout sites.
Fixes: 5d890f591d15 ("ALSA: hda: support for wallclock timestamps")
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/871r35kwji.ffs@tglx
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/hda/hdac_stream.c | 14 ++++----------
sound/pci/hda/hda_controller.c | 1 -
sound/soc/intel/skylake/skl-pcm.c | 1 -
3 files changed, 4 insertions(+), 12 deletions(-)
diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c
index 9867555883c34..aa7955fdf68a0 100644
--- a/sound/hda/hdac_stream.c
+++ b/sound/hda/hdac_stream.c
@@ -534,17 +534,11 @@ static void azx_timecounter_init(struct hdac_stream *azx_dev,
cc->mask = CLOCKSOURCE_MASK(32);
/*
- * Converting from 24 MHz to ns means applying a 125/3 factor.
- * To avoid any saturation issues in intermediate operations,
- * the 125 factor is applied first. The division is applied
- * last after reading the timecounter value.
- * Applying the 1/3 factor as part of the multiplication
- * requires at least 20 bits for a decent precision, however
- * overflows occur after about 4 hours or less, not a option.
+ * Calculate the optimal mult/shift values. The counter wraps
+ * around after ~178.9 seconds.
*/
-
- cc->mult = 125; /* saturation after 195 years */
- cc->shift = 0;
+ clocks_calc_mult_shift(&cc->mult, &cc->shift, 24000000,
+ NSEC_PER_SEC, 178);
nsec = 0; /* audio time is elapsed time since trigger */
timecounter_init(tc, cc, nsec);
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 930ae4002a818..75dcb14ff20ad 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -504,7 +504,6 @@ static int azx_get_time_info(struct snd_pcm_substream *substream,
snd_pcm_gettime(substream->runtime, system_ts);
nsec = timecounter_read(&azx_dev->core.tc);
- nsec = div_u64(nsec, 3); /* can be optimized */
if (audio_tstamp_config->report_delay)
nsec = azx_adjust_codec_delay(substream, nsec);
diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index 9ecaf6a1e8475..e4aa366d356eb 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -1251,7 +1251,6 @@ static int skl_platform_soc_get_time_info(
snd_pcm_gettime(substream->runtime, system_ts);
nsec = timecounter_read(&hstr->tc);
- nsec = div_u64(nsec, 3); /* can be optimized */
if (audio_tstamp_config->report_delay)
nsec = skl_adjust_codec_delay(substream, nsec);
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit f1797e4de1146009c888bcf8b6bb6648d55394f1 ]
module_alloc() first tries to allocate module text within 24 bits direct
jump from kernel text, and tries a wider allocation if first one fails.
When first allocation fails the following is observed in kernel logs:
vmap allocation for size 2400256 failed: use vmalloc=<size> to increase size
systemd-udevd: vmalloc error: size 2395133, vm_struct allocation failed, mode:0xcc0(GFP_KERNEL), nodemask=(null)
CPU: 0 PID: 127 Comm: systemd-udevd Tainted: G W 5.15.5-gentoo-PowerMacG4 #9
Call Trace:
[e2a53a50] [c0ba0048] dump_stack_lvl+0x80/0xb0 (unreliable)
[e2a53a70] [c0540128] warn_alloc+0x11c/0x2b4
[e2a53b50] [c0531be8] __vmalloc_node_range+0xd8/0x64c
[e2a53c10] [c00338c0] module_alloc+0xa0/0xac
[e2a53c40] [c027a368] load_module+0x2ae0/0x8148
[e2a53e30] [c027fc78] sys_finit_module+0xfc/0x130
[e2a53f30] [c0035098] ret_from_syscall+0x0/0x28
...
Add __GFP_NOWARN flag to first allocation so that no warning appears
when it fails.
Reported-by: Erhard Furtner <[email protected]>
Fixes: 2ec13df16704 ("powerpc/modules: Load modules closer to kernel text")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/93c9b84d6ec76aaf7b4f03468e22433a6d308674.1638267035.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/module.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index ed04a3ba66fe8..40a583e9d3c70 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -90,16 +90,17 @@ int module_finalize(const Elf_Ehdr *hdr,
}
static __always_inline void *
-__module_alloc(unsigned long size, unsigned long start, unsigned long end)
+__module_alloc(unsigned long size, unsigned long start, unsigned long end, bool nowarn)
{
pgprot_t prot = strict_module_rwx_enabled() ? PAGE_KERNEL : PAGE_KERNEL_EXEC;
+ gfp_t gfp = GFP_KERNEL | (nowarn ? __GFP_NOWARN : 0);
/*
* Don't do huge page allocations for modules yet until more testing
* is done. STRICT_MODULE_RWX may require extra work to support this
* too.
*/
- return __vmalloc_node_range(size, 1, start, end, GFP_KERNEL, prot,
+ return __vmalloc_node_range(size, 1, start, end, gfp, prot,
VM_FLUSH_RESET_PERMS | VM_NO_HUGE_VMAP,
NUMA_NO_NODE, __builtin_return_address(0));
}
@@ -114,13 +115,13 @@ void *module_alloc(unsigned long size)
/* First try within 32M limit from _etext to avoid branch trampolines */
if (MODULES_VADDR < PAGE_OFFSET && MODULES_END > limit)
- ptr = __module_alloc(size, limit, MODULES_END);
+ ptr = __module_alloc(size, limit, MODULES_END, true);
if (!ptr)
- ptr = __module_alloc(size, MODULES_VADDR, MODULES_END);
+ ptr = __module_alloc(size, MODULES_VADDR, MODULES_END, false);
return ptr;
#else
- return __module_alloc(size, VMALLOC_START, VMALLOC_END);
+ return __module_alloc(size, VMALLOC_START, VMALLOC_END, false);
#endif
}
--
2.34.1
From: Zhang Zixun <[email protected]>
[ Upstream commit de768416b203ac84e02a757b782a32efb388476f ]
A contrived zero-length write, for example, by using write(2):
...
ret = write(fd, str, 0);
...
to the "flags" file causes:
BUG: KASAN: stack-out-of-bounds in flags_write
Write of size 1 at addr ffff888019be7ddf by task writefile/3787
CPU: 4 PID: 3787 Comm: writefile Not tainted 5.16.0-rc7+ #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
due to accessing buf one char before its start.
Prevent such out-of-bounds access.
[ bp: Productize into a proper patch. Link below is the next best
thing because the original mail didn't get archived on lore. ]
Fixes: 0451d14d0561 ("EDAC, mce_amd_inj: Modify flags attribute to use string arguments")
Signed-off-by: Zhang Zixun <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/linux-edac/[email protected]/
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/inject.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/mce/inject.c b/arch/x86/kernel/cpu/mce/inject.c
index 0bfc14041bbb4..b63b548497c14 100644
--- a/arch/x86/kernel/cpu/mce/inject.c
+++ b/arch/x86/kernel/cpu/mce/inject.c
@@ -350,7 +350,7 @@ static ssize_t flags_write(struct file *filp, const char __user *ubuf,
char buf[MAX_FLAG_OPT_SIZE], *__buf;
int err;
- if (cnt > MAX_FLAG_OPT_SIZE)
+ if (!cnt || cnt > MAX_FLAG_OPT_SIZE)
return -EINVAL;
if (copy_from_user(&buf, ubuf, cnt))
--
2.34.1
From: Edwin Peer <[email protected]>
[ Upstream commit b032228e58ea2477955058ad4d70a636ce1dec51 ]
Change bnxt_get_coredump() and bnxt_get_coredump_length() to non-static
functions.
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/Makefile | 2 +-
.../ethernet/broadcom/bnxt/bnxt_coredump.c | 372 ++++++++++++++++++
.../ethernet/broadcom/bnxt/bnxt_coredump.h | 51 +++
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 356 -----------------
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 43 --
5 files changed, 424 insertions(+), 400 deletions(-)
create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
diff --git a/drivers/net/ethernet/broadcom/bnxt/Makefile b/drivers/net/ethernet/broadcom/bnxt/Makefile
index c6ef7ec2c1151..2bc2b707d6eee 100644
--- a/drivers/net/ethernet/broadcom/bnxt/Makefile
+++ b/drivers/net/ethernet/broadcom/bnxt/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_BNXT) += bnxt_en.o
-bnxt_en-y := bnxt.o bnxt_hwrm.o bnxt_sriov.o bnxt_ethtool.o bnxt_dcb.o bnxt_ulp.o bnxt_xdp.o bnxt_ptp.o bnxt_vfr.o bnxt_devlink.o bnxt_dim.o
+bnxt_en-y := bnxt.o bnxt_hwrm.o bnxt_sriov.o bnxt_ethtool.o bnxt_dcb.o bnxt_ulp.o bnxt_xdp.o bnxt_ptp.o bnxt_vfr.o bnxt_devlink.o bnxt_dim.o bnxt_coredump.o
bnxt_en-$(CONFIG_BNXT_FLOWER_OFFLOAD) += bnxt_tc.o
bnxt_en-$(CONFIG_DEBUG_FS) += bnxt_debugfs.o
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
new file mode 100644
index 0000000000000..3e23fce3771e6
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
@@ -0,0 +1,372 @@
+/* Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2021 Broadcom Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include "bnxt_hsi.h"
+#include "bnxt.h"
+#include "bnxt_hwrm.h"
+#include "bnxt_coredump.h"
+
+static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
+ struct bnxt_hwrm_dbg_dma_info *info)
+{
+ struct hwrm_dbg_cmn_input *cmn_req = msg;
+ __le16 *seq_ptr = msg + info->seq_off;
+ struct hwrm_dbg_cmn_output *cmn_resp;
+ u16 seq = 0, len, segs_off;
+ dma_addr_t dma_handle;
+ void *dma_buf, *resp;
+ int rc, off = 0;
+
+ dma_buf = hwrm_req_dma_slice(bp, msg, info->dma_len, &dma_handle);
+ if (!dma_buf) {
+ hwrm_req_drop(bp, msg);
+ return -ENOMEM;
+ }
+
+ hwrm_req_timeout(bp, msg, HWRM_COREDUMP_TIMEOUT);
+ cmn_resp = hwrm_req_hold(bp, msg);
+ resp = cmn_resp;
+
+ segs_off = offsetof(struct hwrm_dbg_coredump_list_output,
+ total_segments);
+ cmn_req->host_dest_addr = cpu_to_le64(dma_handle);
+ cmn_req->host_buf_len = cpu_to_le32(info->dma_len);
+ while (1) {
+ *seq_ptr = cpu_to_le16(seq);
+ rc = hwrm_req_send(bp, msg);
+ if (rc)
+ break;
+
+ len = le16_to_cpu(*((__le16 *)(resp + info->data_len_off)));
+ if (!seq &&
+ cmn_req->req_type == cpu_to_le16(HWRM_DBG_COREDUMP_LIST)) {
+ info->segs = le16_to_cpu(*((__le16 *)(resp +
+ segs_off)));
+ if (!info->segs) {
+ rc = -EIO;
+ break;
+ }
+
+ info->dest_buf_size = info->segs *
+ sizeof(struct coredump_segment_record);
+ info->dest_buf = kmalloc(info->dest_buf_size,
+ GFP_KERNEL);
+ if (!info->dest_buf) {
+ rc = -ENOMEM;
+ break;
+ }
+ }
+
+ if (info->dest_buf) {
+ if ((info->seg_start + off + len) <=
+ BNXT_COREDUMP_BUF_LEN(info->buf_len)) {
+ memcpy(info->dest_buf + off, dma_buf, len);
+ } else {
+ rc = -ENOBUFS;
+ break;
+ }
+ }
+
+ if (cmn_req->req_type ==
+ cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE))
+ info->dest_buf_size += len;
+
+ if (!(cmn_resp->flags & HWRM_DBG_CMN_FLAGS_MORE))
+ break;
+
+ seq++;
+ off += len;
+ }
+ hwrm_req_drop(bp, msg);
+ return rc;
+}
+
+static int bnxt_hwrm_dbg_coredump_list(struct bnxt *bp,
+ struct bnxt_coredump *coredump)
+{
+ struct bnxt_hwrm_dbg_dma_info info = {NULL};
+ struct hwrm_dbg_coredump_list_input *req;
+ int rc;
+
+ rc = hwrm_req_init(bp, req, HWRM_DBG_COREDUMP_LIST);
+ if (rc)
+ return rc;
+
+ info.dma_len = COREDUMP_LIST_BUF_LEN;
+ info.seq_off = offsetof(struct hwrm_dbg_coredump_list_input, seq_no);
+ info.data_len_off = offsetof(struct hwrm_dbg_coredump_list_output,
+ data_len);
+
+ rc = bnxt_hwrm_dbg_dma_data(bp, req, &info);
+ if (!rc) {
+ coredump->data = info.dest_buf;
+ coredump->data_size = info.dest_buf_size;
+ coredump->total_segs = info.segs;
+ }
+ return rc;
+}
+
+static int bnxt_hwrm_dbg_coredump_initiate(struct bnxt *bp, u16 component_id,
+ u16 segment_id)
+{
+ struct hwrm_dbg_coredump_initiate_input *req;
+ int rc;
+
+ rc = hwrm_req_init(bp, req, HWRM_DBG_COREDUMP_INITIATE);
+ if (rc)
+ return rc;
+
+ hwrm_req_timeout(bp, req, HWRM_COREDUMP_TIMEOUT);
+ req->component_id = cpu_to_le16(component_id);
+ req->segment_id = cpu_to_le16(segment_id);
+
+ return hwrm_req_send(bp, req);
+}
+
+static int bnxt_hwrm_dbg_coredump_retrieve(struct bnxt *bp, u16 component_id,
+ u16 segment_id, u32 *seg_len,
+ void *buf, u32 buf_len, u32 offset)
+{
+ struct hwrm_dbg_coredump_retrieve_input *req;
+ struct bnxt_hwrm_dbg_dma_info info = {NULL};
+ int rc;
+
+ rc = hwrm_req_init(bp, req, HWRM_DBG_COREDUMP_RETRIEVE);
+ if (rc)
+ return rc;
+
+ req->component_id = cpu_to_le16(component_id);
+ req->segment_id = cpu_to_le16(segment_id);
+
+ info.dma_len = COREDUMP_RETRIEVE_BUF_LEN;
+ info.seq_off = offsetof(struct hwrm_dbg_coredump_retrieve_input,
+ seq_no);
+ info.data_len_off = offsetof(struct hwrm_dbg_coredump_retrieve_output,
+ data_len);
+ if (buf) {
+ info.dest_buf = buf + offset;
+ info.buf_len = buf_len;
+ info.seg_start = offset;
+ }
+
+ rc = bnxt_hwrm_dbg_dma_data(bp, req, &info);
+ if (!rc)
+ *seg_len = info.dest_buf_size;
+
+ return rc;
+}
+
+static void
+bnxt_fill_coredump_seg_hdr(struct bnxt *bp,
+ struct bnxt_coredump_segment_hdr *seg_hdr,
+ struct coredump_segment_record *seg_rec, u32 seg_len,
+ int status, u32 duration, u32 instance)
+{
+ memset(seg_hdr, 0, sizeof(*seg_hdr));
+ memcpy(seg_hdr->signature, "sEgM", 4);
+ if (seg_rec) {
+ seg_hdr->component_id = (__force __le32)seg_rec->component_id;
+ seg_hdr->segment_id = (__force __le32)seg_rec->segment_id;
+ seg_hdr->low_version = seg_rec->version_low;
+ seg_hdr->high_version = seg_rec->version_hi;
+ } else {
+ /* For hwrm_ver_get response Component id = 2
+ * and Segment id = 0
+ */
+ seg_hdr->component_id = cpu_to_le32(2);
+ seg_hdr->segment_id = 0;
+ }
+ seg_hdr->function_id = cpu_to_le16(bp->pdev->devfn);
+ seg_hdr->length = cpu_to_le32(seg_len);
+ seg_hdr->status = cpu_to_le32(status);
+ seg_hdr->duration = cpu_to_le32(duration);
+ seg_hdr->data_offset = cpu_to_le32(sizeof(*seg_hdr));
+ seg_hdr->instance = cpu_to_le32(instance);
+}
+
+static void
+bnxt_fill_coredump_record(struct bnxt *bp, struct bnxt_coredump_record *record,
+ time64_t start, s16 start_utc, u16 total_segs,
+ int status)
+{
+ time64_t end = ktime_get_real_seconds();
+ u32 os_ver_major = 0, os_ver_minor = 0;
+ struct tm tm;
+
+ time64_to_tm(start, 0, &tm);
+ memset(record, 0, sizeof(*record));
+ memcpy(record->signature, "cOrE", 4);
+ record->flags = 0;
+ record->low_version = 0;
+ record->high_version = 1;
+ record->asic_state = 0;
+ strscpy(record->system_name, utsname()->nodename,
+ sizeof(record->system_name));
+ record->year = cpu_to_le16(tm.tm_year + 1900);
+ record->month = cpu_to_le16(tm.tm_mon + 1);
+ record->day = cpu_to_le16(tm.tm_mday);
+ record->hour = cpu_to_le16(tm.tm_hour);
+ record->minute = cpu_to_le16(tm.tm_min);
+ record->second = cpu_to_le16(tm.tm_sec);
+ record->utc_bias = cpu_to_le16(start_utc);
+ strcpy(record->commandline, "ethtool -w");
+ record->total_segments = cpu_to_le32(total_segs);
+
+ if (sscanf(utsname()->release, "%u.%u", &os_ver_major, &os_ver_minor) != 2)
+ netdev_warn(bp->dev, "Unknown OS release in coredump\n");
+ record->os_ver_major = cpu_to_le32(os_ver_major);
+ record->os_ver_minor = cpu_to_le32(os_ver_minor);
+
+ strscpy(record->os_name, utsname()->sysname, sizeof(record->os_name));
+ time64_to_tm(end, 0, &tm);
+ record->end_year = cpu_to_le16(tm.tm_year + 1900);
+ record->end_month = cpu_to_le16(tm.tm_mon + 1);
+ record->end_day = cpu_to_le16(tm.tm_mday);
+ record->end_hour = cpu_to_le16(tm.tm_hour);
+ record->end_minute = cpu_to_le16(tm.tm_min);
+ record->end_second = cpu_to_le16(tm.tm_sec);
+ record->end_utc_bias = cpu_to_le16(sys_tz.tz_minuteswest * 60);
+ record->asic_id1 = cpu_to_le32(bp->chip_num << 16 |
+ bp->ver_resp.chip_rev << 8 |
+ bp->ver_resp.chip_metal);
+ record->asic_id2 = 0;
+ record->coredump_status = cpu_to_le32(status);
+ record->ioctl_low_version = 0;
+ record->ioctl_high_version = 0;
+}
+
+static int __bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
+{
+ u32 ver_get_resp_len = sizeof(struct hwrm_ver_get_output);
+ u32 offset = 0, seg_hdr_len, seg_record_len, buf_len = 0;
+ struct coredump_segment_record *seg_record = NULL;
+ struct bnxt_coredump_segment_hdr seg_hdr;
+ struct bnxt_coredump coredump = {NULL};
+ time64_t start_time;
+ u16 start_utc;
+ int rc = 0, i;
+
+ if (buf)
+ buf_len = *dump_len;
+
+ start_time = ktime_get_real_seconds();
+ start_utc = sys_tz.tz_minuteswest * 60;
+ seg_hdr_len = sizeof(seg_hdr);
+
+ /* First segment should be hwrm_ver_get response */
+ *dump_len = seg_hdr_len + ver_get_resp_len;
+ if (buf) {
+ bnxt_fill_coredump_seg_hdr(bp, &seg_hdr, NULL, ver_get_resp_len,
+ 0, 0, 0);
+ memcpy(buf + offset, &seg_hdr, seg_hdr_len);
+ offset += seg_hdr_len;
+ memcpy(buf + offset, &bp->ver_resp, ver_get_resp_len);
+ offset += ver_get_resp_len;
+ }
+
+ rc = bnxt_hwrm_dbg_coredump_list(bp, &coredump);
+ if (rc) {
+ netdev_err(bp->dev, "Failed to get coredump segment list\n");
+ goto err;
+ }
+
+ *dump_len += seg_hdr_len * coredump.total_segs;
+
+ seg_record = (struct coredump_segment_record *)coredump.data;
+ seg_record_len = sizeof(*seg_record);
+
+ for (i = 0; i < coredump.total_segs; i++) {
+ u16 comp_id = le16_to_cpu(seg_record->component_id);
+ u16 seg_id = le16_to_cpu(seg_record->segment_id);
+ u32 duration = 0, seg_len = 0;
+ unsigned long start, end;
+
+ if (buf && ((offset + seg_hdr_len) >
+ BNXT_COREDUMP_BUF_LEN(buf_len))) {
+ rc = -ENOBUFS;
+ goto err;
+ }
+
+ start = jiffies;
+
+ rc = bnxt_hwrm_dbg_coredump_initiate(bp, comp_id, seg_id);
+ if (rc) {
+ netdev_err(bp->dev,
+ "Failed to initiate coredump for seg = %d\n",
+ seg_record->segment_id);
+ goto next_seg;
+ }
+
+ /* Write segment data into the buffer */
+ rc = bnxt_hwrm_dbg_coredump_retrieve(bp, comp_id, seg_id,
+ &seg_len, buf, buf_len,
+ offset + seg_hdr_len);
+ if (rc && rc == -ENOBUFS)
+ goto err;
+ else if (rc)
+ netdev_err(bp->dev,
+ "Failed to retrieve coredump for seg = %d\n",
+ seg_record->segment_id);
+
+next_seg:
+ end = jiffies;
+ duration = jiffies_to_msecs(end - start);
+ bnxt_fill_coredump_seg_hdr(bp, &seg_hdr, seg_record, seg_len,
+ rc, duration, 0);
+
+ if (buf) {
+ /* Write segment header into the buffer */
+ memcpy(buf + offset, &seg_hdr, seg_hdr_len);
+ offset += seg_hdr_len + seg_len;
+ }
+
+ *dump_len += seg_len;
+ seg_record =
+ (struct coredump_segment_record *)((u8 *)seg_record +
+ seg_record_len);
+ }
+
+err:
+ if (buf)
+ bnxt_fill_coredump_record(bp, buf + offset, start_time,
+ start_utc, coredump.total_segs + 1,
+ rc);
+ kfree(coredump.data);
+ *dump_len += sizeof(struct bnxt_coredump_record);
+ if (rc == -ENOBUFS)
+ netdev_err(bp->dev, "Firmware returned large coredump buffer\n");
+ return rc;
+}
+
+int bnxt_get_coredump(struct bnxt *bp, u16 dump_type, void *buf, u32 *dump_len)
+{
+ if (dump_type == BNXT_DUMP_CRASH) {
+#ifdef CONFIG_TEE_BNXT_FW
+ return tee_bnxt_copy_coredump(buf, 0, *dump_len);
+#else
+ return -EOPNOTSUPP;
+#endif
+ } else {
+ return __bnxt_get_coredump(bp, buf, dump_len);
+ }
+}
+
+u32 bnxt_get_coredump_length(struct bnxt *bp, u16 dump_type)
+{
+ u32 len = 0;
+
+ if (dump_type == BNXT_DUMP_CRASH)
+ len = BNXT_CRASH_DUMP_LEN;
+ else
+ __bnxt_get_coredump(bp, NULL, &len);
+ return len;
+}
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.h
index 09c22f8fe3991..b1a1b2fffb194 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.h
@@ -10,6 +10,10 @@
#ifndef BNXT_COREDUMP_H
#define BNXT_COREDUMP_H
+#include <linux/utsname.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+
struct bnxt_coredump_segment_hdr {
__u8 signature[4];
__le32 component_id;
@@ -63,4 +67,51 @@ struct bnxt_coredump_record {
__u8 ioctl_high_version;
__le16 rsvd3[313];
};
+
+#define BNXT_CRASH_DUMP_LEN (8 << 20)
+
+#define COREDUMP_LIST_BUF_LEN 2048
+#define COREDUMP_RETRIEVE_BUF_LEN 4096
+
+struct bnxt_coredump {
+ void *data;
+ int data_size;
+ u16 total_segs;
+};
+
+#define BNXT_COREDUMP_BUF_LEN(len) ((len) - sizeof(struct bnxt_coredump_record))
+
+struct bnxt_hwrm_dbg_dma_info {
+ void *dest_buf;
+ int dest_buf_size;
+ u16 dma_len;
+ u16 seq_off;
+ u16 data_len_off;
+ u16 segs;
+ u32 seg_start;
+ u32 buf_len;
+};
+
+struct hwrm_dbg_cmn_input {
+ __le16 req_type;
+ __le16 cmpl_ring;
+ __le16 seq_id;
+ __le16 target_id;
+ __le64 resp_addr;
+ __le64 host_dest_addr;
+ __le32 host_buf_len;
+};
+
+struct hwrm_dbg_cmn_output {
+ __le16 error_code;
+ __le16 req_type;
+ __le16 seq_id;
+ __le16 resp_len;
+ u8 flags;
+ #define HWRM_DBG_CMN_FLAGS_MORE 1
+};
+
+int bnxt_get_coredump(struct bnxt *bp, u16 dump_type, void *buf, u32 *dump_len);
+u32 bnxt_get_coredump_length(struct bnxt *bp, u16 dump_type);
+
#endif
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 161c354ed4864..c5974b16670a8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -3609,362 +3609,6 @@ static int bnxt_reset(struct net_device *dev, u32 *flags)
return 0;
}
-static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
- struct bnxt_hwrm_dbg_dma_info *info)
-{
- struct hwrm_dbg_cmn_input *cmn_req = msg;
- __le16 *seq_ptr = msg + info->seq_off;
- struct hwrm_dbg_cmn_output *cmn_resp;
- u16 seq = 0, len, segs_off;
- dma_addr_t dma_handle;
- void *dma_buf, *resp;
- int rc, off = 0;
-
- dma_buf = hwrm_req_dma_slice(bp, msg, info->dma_len, &dma_handle);
- if (!dma_buf) {
- hwrm_req_drop(bp, msg);
- return -ENOMEM;
- }
-
- hwrm_req_timeout(bp, msg, HWRM_COREDUMP_TIMEOUT);
- cmn_resp = hwrm_req_hold(bp, msg);
- resp = cmn_resp;
-
- segs_off = offsetof(struct hwrm_dbg_coredump_list_output,
- total_segments);
- cmn_req->host_dest_addr = cpu_to_le64(dma_handle);
- cmn_req->host_buf_len = cpu_to_le32(info->dma_len);
- while (1) {
- *seq_ptr = cpu_to_le16(seq);
- rc = hwrm_req_send(bp, msg);
- if (rc)
- break;
-
- len = le16_to_cpu(*((__le16 *)(resp + info->data_len_off)));
- if (!seq &&
- cmn_req->req_type == cpu_to_le16(HWRM_DBG_COREDUMP_LIST)) {
- info->segs = le16_to_cpu(*((__le16 *)(resp +
- segs_off)));
- if (!info->segs) {
- rc = -EIO;
- break;
- }
-
- info->dest_buf_size = info->segs *
- sizeof(struct coredump_segment_record);
- info->dest_buf = kmalloc(info->dest_buf_size,
- GFP_KERNEL);
- if (!info->dest_buf) {
- rc = -ENOMEM;
- break;
- }
- }
-
- if (info->dest_buf) {
- if ((info->seg_start + off + len) <=
- BNXT_COREDUMP_BUF_LEN(info->buf_len)) {
- memcpy(info->dest_buf + off, dma_buf, len);
- } else {
- rc = -ENOBUFS;
- break;
- }
- }
-
- if (cmn_req->req_type ==
- cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE))
- info->dest_buf_size += len;
-
- if (!(cmn_resp->flags & HWRM_DBG_CMN_FLAGS_MORE))
- break;
-
- seq++;
- off += len;
- }
- hwrm_req_drop(bp, msg);
- return rc;
-}
-
-static int bnxt_hwrm_dbg_coredump_list(struct bnxt *bp,
- struct bnxt_coredump *coredump)
-{
- struct bnxt_hwrm_dbg_dma_info info = {NULL};
- struct hwrm_dbg_coredump_list_input *req;
- int rc;
-
- rc = hwrm_req_init(bp, req, HWRM_DBG_COREDUMP_LIST);
- if (rc)
- return rc;
-
- info.dma_len = COREDUMP_LIST_BUF_LEN;
- info.seq_off = offsetof(struct hwrm_dbg_coredump_list_input, seq_no);
- info.data_len_off = offsetof(struct hwrm_dbg_coredump_list_output,
- data_len);
-
- rc = bnxt_hwrm_dbg_dma_data(bp, req, &info);
- if (!rc) {
- coredump->data = info.dest_buf;
- coredump->data_size = info.dest_buf_size;
- coredump->total_segs = info.segs;
- }
- return rc;
-}
-
-static int bnxt_hwrm_dbg_coredump_initiate(struct bnxt *bp, u16 component_id,
- u16 segment_id)
-{
- struct hwrm_dbg_coredump_initiate_input *req;
- int rc;
-
- rc = hwrm_req_init(bp, req, HWRM_DBG_COREDUMP_INITIATE);
- if (rc)
- return rc;
-
- hwrm_req_timeout(bp, req, HWRM_COREDUMP_TIMEOUT);
- req->component_id = cpu_to_le16(component_id);
- req->segment_id = cpu_to_le16(segment_id);
-
- return hwrm_req_send(bp, req);
-}
-
-static int bnxt_hwrm_dbg_coredump_retrieve(struct bnxt *bp, u16 component_id,
- u16 segment_id, u32 *seg_len,
- void *buf, u32 buf_len, u32 offset)
-{
- struct hwrm_dbg_coredump_retrieve_input *req;
- struct bnxt_hwrm_dbg_dma_info info = {NULL};
- int rc;
-
- rc = hwrm_req_init(bp, req, HWRM_DBG_COREDUMP_RETRIEVE);
- if (rc)
- return rc;
-
- req->component_id = cpu_to_le16(component_id);
- req->segment_id = cpu_to_le16(segment_id);
-
- info.dma_len = COREDUMP_RETRIEVE_BUF_LEN;
- info.seq_off = offsetof(struct hwrm_dbg_coredump_retrieve_input,
- seq_no);
- info.data_len_off = offsetof(struct hwrm_dbg_coredump_retrieve_output,
- data_len);
- if (buf) {
- info.dest_buf = buf + offset;
- info.buf_len = buf_len;
- info.seg_start = offset;
- }
-
- rc = bnxt_hwrm_dbg_dma_data(bp, req, &info);
- if (!rc)
- *seg_len = info.dest_buf_size;
-
- return rc;
-}
-
-static void
-bnxt_fill_coredump_seg_hdr(struct bnxt *bp,
- struct bnxt_coredump_segment_hdr *seg_hdr,
- struct coredump_segment_record *seg_rec, u32 seg_len,
- int status, u32 duration, u32 instance)
-{
- memset(seg_hdr, 0, sizeof(*seg_hdr));
- memcpy(seg_hdr->signature, "sEgM", 4);
- if (seg_rec) {
- seg_hdr->component_id = (__force __le32)seg_rec->component_id;
- seg_hdr->segment_id = (__force __le32)seg_rec->segment_id;
- seg_hdr->low_version = seg_rec->version_low;
- seg_hdr->high_version = seg_rec->version_hi;
- } else {
- /* For hwrm_ver_get response Component id = 2
- * and Segment id = 0
- */
- seg_hdr->component_id = cpu_to_le32(2);
- seg_hdr->segment_id = 0;
- }
- seg_hdr->function_id = cpu_to_le16(bp->pdev->devfn);
- seg_hdr->length = cpu_to_le32(seg_len);
- seg_hdr->status = cpu_to_le32(status);
- seg_hdr->duration = cpu_to_le32(duration);
- seg_hdr->data_offset = cpu_to_le32(sizeof(*seg_hdr));
- seg_hdr->instance = cpu_to_le32(instance);
-}
-
-static void
-bnxt_fill_coredump_record(struct bnxt *bp, struct bnxt_coredump_record *record,
- time64_t start, s16 start_utc, u16 total_segs,
- int status)
-{
- time64_t end = ktime_get_real_seconds();
- u32 os_ver_major = 0, os_ver_minor = 0;
- struct tm tm;
-
- time64_to_tm(start, 0, &tm);
- memset(record, 0, sizeof(*record));
- memcpy(record->signature, "cOrE", 4);
- record->flags = 0;
- record->low_version = 0;
- record->high_version = 1;
- record->asic_state = 0;
- strscpy(record->system_name, utsname()->nodename,
- sizeof(record->system_name));
- record->year = cpu_to_le16(tm.tm_year + 1900);
- record->month = cpu_to_le16(tm.tm_mon + 1);
- record->day = cpu_to_le16(tm.tm_mday);
- record->hour = cpu_to_le16(tm.tm_hour);
- record->minute = cpu_to_le16(tm.tm_min);
- record->second = cpu_to_le16(tm.tm_sec);
- record->utc_bias = cpu_to_le16(start_utc);
- strcpy(record->commandline, "ethtool -w");
- record->total_segments = cpu_to_le32(total_segs);
-
- if (sscanf(utsname()->release, "%u.%u", &os_ver_major, &os_ver_minor) != 2)
- netdev_warn(bp->dev, "Unknown OS release in coredump\n");
- record->os_ver_major = cpu_to_le32(os_ver_major);
- record->os_ver_minor = cpu_to_le32(os_ver_minor);
-
- strscpy(record->os_name, utsname()->sysname, sizeof(record->os_name));
- time64_to_tm(end, 0, &tm);
- record->end_year = cpu_to_le16(tm.tm_year + 1900);
- record->end_month = cpu_to_le16(tm.tm_mon + 1);
- record->end_day = cpu_to_le16(tm.tm_mday);
- record->end_hour = cpu_to_le16(tm.tm_hour);
- record->end_minute = cpu_to_le16(tm.tm_min);
- record->end_second = cpu_to_le16(tm.tm_sec);
- record->end_utc_bias = cpu_to_le16(sys_tz.tz_minuteswest * 60);
- record->asic_id1 = cpu_to_le32(bp->chip_num << 16 |
- bp->ver_resp.chip_rev << 8 |
- bp->ver_resp.chip_metal);
- record->asic_id2 = 0;
- record->coredump_status = cpu_to_le32(status);
- record->ioctl_low_version = 0;
- record->ioctl_high_version = 0;
-}
-
-static int __bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
-{
- u32 ver_get_resp_len = sizeof(struct hwrm_ver_get_output);
- u32 offset = 0, seg_hdr_len, seg_record_len, buf_len = 0;
- struct coredump_segment_record *seg_record = NULL;
- struct bnxt_coredump_segment_hdr seg_hdr;
- struct bnxt_coredump coredump = {NULL};
- time64_t start_time;
- u16 start_utc;
- int rc = 0, i;
-
- if (buf)
- buf_len = *dump_len;
-
- start_time = ktime_get_real_seconds();
- start_utc = sys_tz.tz_minuteswest * 60;
- seg_hdr_len = sizeof(seg_hdr);
-
- /* First segment should be hwrm_ver_get response */
- *dump_len = seg_hdr_len + ver_get_resp_len;
- if (buf) {
- bnxt_fill_coredump_seg_hdr(bp, &seg_hdr, NULL, ver_get_resp_len,
- 0, 0, 0);
- memcpy(buf + offset, &seg_hdr, seg_hdr_len);
- offset += seg_hdr_len;
- memcpy(buf + offset, &bp->ver_resp, ver_get_resp_len);
- offset += ver_get_resp_len;
- }
-
- rc = bnxt_hwrm_dbg_coredump_list(bp, &coredump);
- if (rc) {
- netdev_err(bp->dev, "Failed to get coredump segment list\n");
- goto err;
- }
-
- *dump_len += seg_hdr_len * coredump.total_segs;
-
- seg_record = (struct coredump_segment_record *)coredump.data;
- seg_record_len = sizeof(*seg_record);
-
- for (i = 0; i < coredump.total_segs; i++) {
- u16 comp_id = le16_to_cpu(seg_record->component_id);
- u16 seg_id = le16_to_cpu(seg_record->segment_id);
- u32 duration = 0, seg_len = 0;
- unsigned long start, end;
-
- if (buf && ((offset + seg_hdr_len) >
- BNXT_COREDUMP_BUF_LEN(buf_len))) {
- rc = -ENOBUFS;
- goto err;
- }
-
- start = jiffies;
-
- rc = bnxt_hwrm_dbg_coredump_initiate(bp, comp_id, seg_id);
- if (rc) {
- netdev_err(bp->dev,
- "Failed to initiate coredump for seg = %d\n",
- seg_record->segment_id);
- goto next_seg;
- }
-
- /* Write segment data into the buffer */
- rc = bnxt_hwrm_dbg_coredump_retrieve(bp, comp_id, seg_id,
- &seg_len, buf, buf_len,
- offset + seg_hdr_len);
- if (rc && rc == -ENOBUFS)
- goto err;
- else if (rc)
- netdev_err(bp->dev,
- "Failed to retrieve coredump for seg = %d\n",
- seg_record->segment_id);
-
-next_seg:
- end = jiffies;
- duration = jiffies_to_msecs(end - start);
- bnxt_fill_coredump_seg_hdr(bp, &seg_hdr, seg_record, seg_len,
- rc, duration, 0);
-
- if (buf) {
- /* Write segment header into the buffer */
- memcpy(buf + offset, &seg_hdr, seg_hdr_len);
- offset += seg_hdr_len + seg_len;
- }
-
- *dump_len += seg_len;
- seg_record =
- (struct coredump_segment_record *)((u8 *)seg_record +
- seg_record_len);
- }
-
-err:
- if (buf)
- bnxt_fill_coredump_record(bp, buf + offset, start_time,
- start_utc, coredump.total_segs + 1,
- rc);
- kfree(coredump.data);
- *dump_len += sizeof(struct bnxt_coredump_record);
- if (rc == -ENOBUFS)
- netdev_err(bp->dev, "Firmware returned large coredump buffer\n");
- return rc;
-}
-
-static int bnxt_get_coredump(struct bnxt *bp, u16 dump_type, void *buf, u32 *dump_len)
-{
- if (dump_type == BNXT_DUMP_CRASH) {
-#ifdef CONFIG_TEE_BNXT_FW
- return tee_bnxt_copy_coredump(buf, 0, *dump_len);
-#else
- return -EOPNOTSUPP;
-#endif
- } else {
- return __bnxt_get_coredump(bp, buf, dump_len);
- }
-}
-
-static u32 bnxt_get_coredump_length(struct bnxt *bp, u16 dump_type)
-{
- u32 len = 0;
-
- if (dump_type == BNXT_DUMP_CRASH)
- len = BNXT_CRASH_DUMP_LEN;
- else
- __bnxt_get_coredump(bp, NULL, &len);
- return len;
-}
-
static int bnxt_set_dump(struct net_device *dev, struct ethtool_dump *dump)
{
struct bnxt *bp = netdev_priv(dev);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
index 0a57cb6a4a4bf..11a719f98defd 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
@@ -22,49 +22,6 @@ struct bnxt_led_cfg {
u8 rsvd;
};
-#define COREDUMP_LIST_BUF_LEN 2048
-#define COREDUMP_RETRIEVE_BUF_LEN 4096
-
-struct bnxt_coredump {
- void *data;
- int data_size;
- u16 total_segs;
-};
-
-#define BNXT_COREDUMP_BUF_LEN(len) ((len) - sizeof(struct bnxt_coredump_record))
-
-struct bnxt_hwrm_dbg_dma_info {
- void *dest_buf;
- int dest_buf_size;
- u16 dma_len;
- u16 seq_off;
- u16 data_len_off;
- u16 segs;
- u32 seg_start;
- u32 buf_len;
-};
-
-struct hwrm_dbg_cmn_input {
- __le16 req_type;
- __le16 cmpl_ring;
- __le16 seq_id;
- __le16 target_id;
- __le64 resp_addr;
- __le64 host_dest_addr;
- __le32 host_buf_len;
-};
-
-struct hwrm_dbg_cmn_output {
- __le16 error_code;
- __le16 req_type;
- __le16 seq_id;
- __le16 resp_len;
- u8 flags;
- #define HWRM_DBG_CMN_FLAGS_MORE 1
-};
-
-#define BNXT_CRASH_DUMP_LEN (8 << 20)
-
#define BNXT_LED_DFLT_ENA \
(PORT_LED_CFG_REQ_ENABLES_LED0_ID | \
PORT_LED_CFG_REQ_ENABLES_LED0_STATE | \
--
2.34.1
From: Kees Cook <[email protected]>
[ Upstream commit f5912cc19acd7c24b2dbf65a6340bf194244f085 ]
Using MKWORD() on a byte-sized variable results in OOB read. Expand the
size of the reserved area so both MKWORD and MKBYTE continue to work
without overflow. Silences this warning on a -Warray-bounds build:
drivers/char/mwave/3780i.h:346:22: error: array subscript 'short unsigned int[0]' is partly outside array bounds of 'DSP_ISA_SLAVE_CONTROL[1]' [-Werror=array-bounds]
346 | #define MKWORD(var) (*((unsigned short *)(&var)))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/char/mwave/3780i.h:356:40: note: in definition of macro 'OutWordDsp'
356 | #define OutWordDsp(index,value) outw(value,usDspBaseIO+index)
| ^~~~~
drivers/char/mwave/3780i.c:373:41: note: in expansion of macro 'MKWORD'
373 | OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
| ^~~~~~
drivers/char/mwave/3780i.c:358:31: note: while referencing 'rSlaveControl'
358 | DSP_ISA_SLAVE_CONTROL rSlaveControl;
| ^~~~~~~~~~~~~
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/mwave/3780i.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/mwave/3780i.h b/drivers/char/mwave/3780i.h
index 9ccb6b270b071..95164246afd1a 100644
--- a/drivers/char/mwave/3780i.h
+++ b/drivers/char/mwave/3780i.h
@@ -68,7 +68,7 @@ typedef struct {
unsigned char ClockControl:1; /* RW: Clock control: 0=normal, 1=stop 3780i clocks */
unsigned char SoftReset:1; /* RW: Soft reset 0=normal, 1=soft reset active */
unsigned char ConfigMode:1; /* RW: Configuration mode, 0=normal, 1=config mode */
- unsigned char Reserved:5; /* 0: Reserved */
+ unsigned short Reserved:13; /* 0: Reserved */
} DSP_ISA_SLAVE_CONTROL;
--
2.34.1
From: Miroslav Lichvar <[email protected]>
[ Upstream commit 007747a984ea5e895b7d8b056b24ebf431e1e71d ]
When multiple sockets using the SOF_TIMESTAMPING_BIND_PHC flag received
a packet with a hardware timestamp (e.g. multiple PTP instances in
different PTP domains using the UDPv4/v6 multicast or L2 transport),
the timestamps received on some sockets were corrupted due to repeated
conversion of the same timestamp (by the same or different vclocks).
Fix ptp_convert_timestamp() to not modify the shared skb timestamp
and return the converted timestamp as a ktime_t instead. If the
conversion fails, return 0 to not confuse the application with
timestamps corresponding to an unexpected PHC.
Fixes: d7c088265588 ("net: socket: support hardware timestamp conversion to PHC bound")
Signed-off-by: Miroslav Lichvar <[email protected]>
Cc: Yangbo Lu <[email protected]>
Cc: Richard Cochran <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_vclock.c | 10 +++++-----
include/linux/ptp_clock_kernel.h | 12 +++++++-----
net/socket.c | 9 ++++++---
3 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/ptp/ptp_vclock.c b/drivers/ptp/ptp_vclock.c
index baee0379482bc..ab1d233173e13 100644
--- a/drivers/ptp/ptp_vclock.c
+++ b/drivers/ptp/ptp_vclock.c
@@ -185,8 +185,8 @@ out:
}
EXPORT_SYMBOL(ptp_get_vclocks_index);
-void ptp_convert_timestamp(struct skb_shared_hwtstamps *hwtstamps,
- int vclock_index)
+ktime_t ptp_convert_timestamp(const struct skb_shared_hwtstamps *hwtstamps,
+ int vclock_index)
{
char name[PTP_CLOCK_NAME_LEN] = "";
struct ptp_vclock *vclock;
@@ -198,12 +198,12 @@ void ptp_convert_timestamp(struct skb_shared_hwtstamps *hwtstamps,
snprintf(name, PTP_CLOCK_NAME_LEN, "ptp%d", vclock_index);
dev = class_find_device_by_name(ptp_class, name);
if (!dev)
- return;
+ return 0;
ptp = dev_get_drvdata(dev);
if (!ptp->is_virtual_clock) {
put_device(dev);
- return;
+ return 0;
}
vclock = info_to_vclock(ptp->info);
@@ -215,7 +215,7 @@ void ptp_convert_timestamp(struct skb_shared_hwtstamps *hwtstamps,
spin_unlock_irqrestore(&vclock->lock, flags);
put_device(dev);
- hwtstamps->hwtstamp = ns_to_ktime(ns);
+ return ns_to_ktime(ns);
}
EXPORT_SYMBOL(ptp_convert_timestamp);
#endif
diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h
index 2e5565067355b..554454cb86931 100644
--- a/include/linux/ptp_clock_kernel.h
+++ b/include/linux/ptp_clock_kernel.h
@@ -351,15 +351,17 @@ int ptp_get_vclocks_index(int pclock_index, int **vclock_index);
*
* @hwtstamps: skb_shared_hwtstamps structure pointer
* @vclock_index: phc index of ptp vclock.
+ *
+ * Returns converted timestamp, or 0 on error.
*/
-void ptp_convert_timestamp(struct skb_shared_hwtstamps *hwtstamps,
- int vclock_index);
+ktime_t ptp_convert_timestamp(const struct skb_shared_hwtstamps *hwtstamps,
+ int vclock_index);
#else
static inline int ptp_get_vclocks_index(int pclock_index, int **vclock_index)
{ return 0; }
-static inline void ptp_convert_timestamp(struct skb_shared_hwtstamps *hwtstamps,
- int vclock_index)
-{ }
+static inline ktime_t ptp_convert_timestamp(const struct skb_shared_hwtstamps *hwtstamps,
+ int vclock_index)
+{ return 0; }
#endif
diff --git a/net/socket.c b/net/socket.c
index 7f64a6eccf63f..5053eb0100e48 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -829,6 +829,7 @@ void __sock_recv_timestamp(struct msghdr *msg, struct sock *sk,
int empty = 1, false_tstamp = 0;
struct skb_shared_hwtstamps *shhwtstamps =
skb_hwtstamps(skb);
+ ktime_t hwtstamp;
/* Race occurred between timestamp enabling and packet
receiving. Fill in the current time for now. */
@@ -877,10 +878,12 @@ void __sock_recv_timestamp(struct msghdr *msg, struct sock *sk,
(sk->sk_tsflags & SOF_TIMESTAMPING_RAW_HARDWARE) &&
!skb_is_swtx_tstamp(skb, false_tstamp)) {
if (sk->sk_tsflags & SOF_TIMESTAMPING_BIND_PHC)
- ptp_convert_timestamp(shhwtstamps, sk->sk_bind_phc);
+ hwtstamp = ptp_convert_timestamp(shhwtstamps,
+ sk->sk_bind_phc);
+ else
+ hwtstamp = shhwtstamps->hwtstamp;
- if (ktime_to_timespec64_cond(shhwtstamps->hwtstamp,
- tss.ts + 2)) {
+ if (ktime_to_timespec64_cond(hwtstamp, tss.ts + 2)) {
empty = 0;
if ((sk->sk_tsflags & SOF_TIMESTAMPING_OPT_PKTINFO) &&
--
2.34.1
From: Peiwei Hu <[email protected]>
[ Upstream commit 869fb7e5aecbc163003f93f36dcc26d0554319f6 ]
prom_getprop() can return PROM_ERROR. Binary operator can not identify
it.
Fixes: 94d2dde738a5 ("[POWERPC] Efika: prune fixups and make them more carefull")
Signed-off-by: Peiwei Hu <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/prom_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 18b04b08b9833..f845065c860e3 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2991,7 +2991,7 @@ static void __init fixup_device_tree_efika_add_phy(void)
/* Check if the phy-handle property exists - bail if it does */
rv = prom_getprop(node, "phy-handle", prop, sizeof(prop));
- if (!rv)
+ if (rv <= 0)
return;
/*
--
2.34.1
From: Chen Jun <[email protected]>
[ Upstream commit 0ef333f5ba7f24f5d8478425c163d3097f1c7afd ]
Locality is not appropriately requested before writing the int mask.
Add the missing boilerplate.
Fixes: e6aef069b6e9 ("tpm_tis: convert to using locality callbacks")
Signed-off-by: Chen Jun <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index b2659a4c40168..e2df1098a812f 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -994,7 +994,15 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
intmask &= ~TPM_GLOBAL_INT_ENABLE;
+
+ rc = request_locality(chip, 0);
+ if (rc < 0) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+ release_locality(chip, 0);
rc = tpm_chip_start(chip);
if (rc)
--
2.34.1
From: Dinh Nguyen <[email protected]>
[ Upstream commit 34146c68083f1aef6709196b3dc888c1ceffd357 ]
We should not be clearing the HCD_FLAG_HW_ACCESSIBLE bit if the hardware
does not support clock gating.
Fixes: 50fb0c128b6e ("usb: dwc2: Add clock gating entering flow by system suspend")
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Dinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/hcd.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index a215ec9e172e6..657dbd50faf11 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -4403,11 +4403,12 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
* If not hibernation nor partial power down are supported,
* clock gating is used to save power.
*/
- if (!hsotg->params.no_clock_gating)
+ if (!hsotg->params.no_clock_gating) {
dwc2_host_enter_clock_gating(hsotg);
- /* After entering suspend, hardware is not accessible */
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ /* After entering suspend, hardware is not accessible */
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ }
break;
default:
goto skip_power_saving;
--
2.34.1
From: Kamal Heib <[email protected]>
[ Upstream commit 2a67fcfa0db6b4075515bd23497750849b88850f ]
Before query pkey, make sure that the queried index is valid.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/hw/hns/hns_roce_main.c b/drivers/infiniband/hw/hns/hns_roce_main.c
index 5d39bd08582af..6012340e6d69e 100644
--- a/drivers/infiniband/hw/hns/hns_roce_main.c
+++ b/drivers/infiniband/hw/hns/hns_roce_main.c
@@ -269,6 +269,9 @@ static enum rdma_link_layer hns_roce_get_link_layer(struct ib_device *device,
static int hns_roce_query_pkey(struct ib_device *ib_dev, u32 port, u16 index,
u16 *pkey)
{
+ if (index > 0)
+ return -EINVAL;
+
*pkey = PKEY_ID;
return 0;
--
2.34.1
From: Edwin Peer <[email protected]>
[ Upstream commit 9a575c8c25ae2372112db6d6b3e553cd90e9f02b ]
The coredump functionality will be used by devlink health. Refactor
these functions that get coredump and coredump length. There is no
functional change, but the following checkpatch warnings were
addressed:
- strscpy is preferred over strlcpy.
- sscanf results should be checked, with an additional warning.
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 48 ++++++++++++-------
1 file changed, 31 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 7260910e75fb2..161c354ed4864 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -3803,7 +3803,7 @@ bnxt_fill_coredump_record(struct bnxt *bp, struct bnxt_coredump_record *record,
record->low_version = 0;
record->high_version = 1;
record->asic_state = 0;
- strlcpy(record->system_name, utsname()->nodename,
+ strscpy(record->system_name, utsname()->nodename,
sizeof(record->system_name));
record->year = cpu_to_le16(tm.tm_year + 1900);
record->month = cpu_to_le16(tm.tm_mon + 1);
@@ -3815,11 +3815,12 @@ bnxt_fill_coredump_record(struct bnxt *bp, struct bnxt_coredump_record *record,
strcpy(record->commandline, "ethtool -w");
record->total_segments = cpu_to_le32(total_segs);
- sscanf(utsname()->release, "%u.%u", &os_ver_major, &os_ver_minor);
+ if (sscanf(utsname()->release, "%u.%u", &os_ver_major, &os_ver_minor) != 2)
+ netdev_warn(bp->dev, "Unknown OS release in coredump\n");
record->os_ver_major = cpu_to_le32(os_ver_major);
record->os_ver_minor = cpu_to_le32(os_ver_minor);
- strlcpy(record->os_name, utsname()->sysname, 32);
+ strscpy(record->os_name, utsname()->sysname, sizeof(record->os_name));
time64_to_tm(end, 0, &tm);
record->end_year = cpu_to_le16(tm.tm_year + 1900);
record->end_month = cpu_to_le16(tm.tm_mon + 1);
@@ -3837,7 +3838,7 @@ bnxt_fill_coredump_record(struct bnxt *bp, struct bnxt_coredump_record *record,
record->ioctl_high_version = 0;
}
-static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
+static int __bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
{
u32 ver_get_resp_len = sizeof(struct hwrm_ver_get_output);
u32 offset = 0, seg_hdr_len, seg_record_len, buf_len = 0;
@@ -3940,6 +3941,30 @@ err:
return rc;
}
+static int bnxt_get_coredump(struct bnxt *bp, u16 dump_type, void *buf, u32 *dump_len)
+{
+ if (dump_type == BNXT_DUMP_CRASH) {
+#ifdef CONFIG_TEE_BNXT_FW
+ return tee_bnxt_copy_coredump(buf, 0, *dump_len);
+#else
+ return -EOPNOTSUPP;
+#endif
+ } else {
+ return __bnxt_get_coredump(bp, buf, dump_len);
+ }
+}
+
+static u32 bnxt_get_coredump_length(struct bnxt *bp, u16 dump_type)
+{
+ u32 len = 0;
+
+ if (dump_type == BNXT_DUMP_CRASH)
+ len = BNXT_CRASH_DUMP_LEN;
+ else
+ __bnxt_get_coredump(bp, NULL, &len);
+ return len;
+}
+
static int bnxt_set_dump(struct net_device *dev, struct ethtool_dump *dump)
{
struct bnxt *bp = netdev_priv(dev);
@@ -3971,10 +3996,7 @@ static int bnxt_get_dump_flag(struct net_device *dev, struct ethtool_dump *dump)
bp->ver_resp.hwrm_fw_rsvd_8b;
dump->flag = bp->dump_flag;
- if (bp->dump_flag == BNXT_DUMP_CRASH)
- dump->len = BNXT_CRASH_DUMP_LEN;
- else
- bnxt_get_coredump(bp, NULL, &dump->len);
+ dump->len = bnxt_get_coredump_length(bp, bp->dump_flag);
return 0;
}
@@ -3989,15 +4011,7 @@ static int bnxt_get_dump_data(struct net_device *dev, struct ethtool_dump *dump,
memset(buf, 0, dump->len);
dump->flag = bp->dump_flag;
- if (dump->flag == BNXT_DUMP_CRASH) {
-#ifdef CONFIG_TEE_BNXT_FW
- return tee_bnxt_copy_coredump(buf, 0, dump->len);
-#endif
- } else {
- return bnxt_get_coredump(bp, buf, &dump->len);
- }
-
- return 0;
+ return bnxt_get_coredump(bp, dump->flag, buf, &dump->len);
}
static int bnxt_get_ts_info(struct net_device *dev,
--
2.34.1
From: Thomas Gleixner <[email protected]>
[ Upstream commit 29bbc35e29d9b6347780dcacde2deb4b39344167 ]
pci_irq_vector() and pci_irq_get_affinity() use the list position to find the
MSI-X descriptor at a given index. That's correct for the normal case where
the entry number is the same as the list position.
But it's wrong for cases where MSI-X was allocated with an entries array
describing sparse entry numbers into the hardware message descriptor
table. That's inconsistent at best.
Make it always check the entry number because that's what the zero base
index really means. This change won't break existing users which use a
sparse entries array for allocation because these users retrieve the Linux
interrupt number from the entries array after allocation and none of them
uses pci_irq_vector() or pci_irq_get_affinity().
Fixes: aff171641d18 ("PCI: Provide sensible IRQ vector alloc/free routines")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Juergen Gross <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/msi.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index e11530cb05699..cc4c2b8a5efd7 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1193,19 +1193,24 @@ EXPORT_SYMBOL(pci_free_irq_vectors);
/**
* pci_irq_vector - return Linux IRQ number of a device vector
- * @dev: PCI device to operate on
- * @nr: device-relative interrupt vector index (0-based).
+ * @dev: PCI device to operate on
+ * @nr: Interrupt vector index (0-based)
+ *
+ * @nr has the following meanings depending on the interrupt mode:
+ * MSI-X: The index in the MSI-X vector table
+ * MSI: The index of the enabled MSI vectors
+ * INTx: Must be 0
+ *
+ * Return: The Linux interrupt number or -EINVAl if @nr is out of range.
*/
int pci_irq_vector(struct pci_dev *dev, unsigned int nr)
{
if (dev->msix_enabled) {
struct msi_desc *entry;
- int i = 0;
for_each_pci_msi_entry(entry, dev) {
- if (i == nr)
+ if (entry->msi_attrib.entry_nr == nr)
return entry->irq;
- i++;
}
WARN_ON_ONCE(1);
return -EINVAL;
@@ -1229,17 +1234,22 @@ EXPORT_SYMBOL(pci_irq_vector);
* pci_irq_get_affinity - return the affinity of a particular MSI vector
* @dev: PCI device to operate on
* @nr: device-relative interrupt vector index (0-based).
+ *
+ * @nr has the following meanings depending on the interrupt mode:
+ * MSI-X: The index in the MSI-X vector table
+ * MSI: The index of the enabled MSI vectors
+ * INTx: Must be 0
+ *
+ * Return: A cpumask pointer or NULL if @nr is out of range
*/
const struct cpumask *pci_irq_get_affinity(struct pci_dev *dev, int nr)
{
if (dev->msix_enabled) {
struct msi_desc *entry;
- int i = 0;
for_each_pci_msi_entry(entry, dev) {
- if (i == nr)
+ if (entry->msi_attrib.entry_nr == nr)
return &entry->affinity->mask;
- i++;
}
WARN_ON_ONCE(1);
return NULL;
--
2.34.1
From: Jim Quinlan <[email protected]>
[ Upstream commit a8d61a9112ad0c9216ab45d050991e07bc4f3408 ]
The struct device variable "dev_bogus" was triggering this warning
on a PowerPC build:
drivers/of/unittest.c: In function 'of_unittest_dma_ranges_one.constprop':
[...] >> The frame size of 1424 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
This variable is now dynamically allocated.
Fixes: e0d072782c734 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Jim Quinlan <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Frank Rowand <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/unittest.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 5b85a2a3792ae..242381568f13c 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -911,11 +911,18 @@ static void __init of_unittest_dma_ranges_one(const char *path,
if (!rc) {
phys_addr_t paddr;
dma_addr_t dma_addr;
- struct device dev_bogus;
+ struct device *dev_bogus;
- dev_bogus.dma_range_map = map;
- paddr = dma_to_phys(&dev_bogus, expect_dma_addr);
- dma_addr = phys_to_dma(&dev_bogus, expect_paddr);
+ dev_bogus = kzalloc(sizeof(struct device), GFP_KERNEL);
+ if (!dev_bogus) {
+ unittest(0, "kzalloc() failed\n");
+ kfree(map);
+ return;
+ }
+
+ dev_bogus->dma_range_map = map;
+ paddr = dma_to_phys(dev_bogus, expect_dma_addr);
+ dma_addr = phys_to_dma(dev_bogus, expect_paddr);
unittest(paddr == expect_paddr,
"of_dma_get_range: wrong phys addr %pap (expecting %llx) on node %pOF\n",
@@ -925,6 +932,7 @@ static void __init of_unittest_dma_ranges_one(const char *path,
&dma_addr, expect_dma_addr, np);
kfree(map);
+ kfree(dev_bogus);
}
of_node_put(np);
#endif
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 80bd64af75b4bb11c0329bc66c35da2ddfb66d88 ]
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: d13bd412dce2 ("ALSA: hda - Manage kcontrol lists")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_codec.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 0c4a337c9fc0d..eda70814369bd 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1727,8 +1727,11 @@ void snd_hda_ctls_clear(struct hda_codec *codec)
{
int i;
struct hda_nid_item *items = codec->mixers.list;
+
+ down_write(&codec->card->controls_rwsem);
for (i = 0; i < codec->mixers.used; i++)
snd_ctl_remove(codec->card, items[i].kctl);
+ up_write(&codec->card->controls_rwsem);
snd_array_free(&codec->mixers);
snd_array_free(&codec->nids);
}
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit af11dee4361b3519981fa04d014873f9d9edd6ac ]
================================================================================
UBSAN: shift-out-of-bounds in arch/powerpc/mm/kasan/book3s_32.c:22:23
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.5-gentoo-PowerMacG4 #9
Call Trace:
[c214be60] [c0ba0048] dump_stack_lvl+0x80/0xb0 (unreliable)
[c214be80] [c0b99288] ubsan_epilogue+0x10/0x5c
[c214be90] [c0b98fe0] __ubsan_handle_shift_out_of_bounds+0x94/0x138
[c214bf00] [c1c0f010] kasan_init_region+0xd8/0x26c
[c214bf30] [c1c0ed84] kasan_init+0xc0/0x198
[c214bf70] [c1c08024] setup_arch+0x18/0x54c
[c214bfc0] [c1c037f0] start_kernel+0x90/0x33c
[c214bff0] [00003610] 0x3610
================================================================================
This happens when the directly mapped memory is a power of 2.
Fix it by checking the shift and set the result to 0 when shift is -1
Fixes: 7974c4732642 ("powerpc/32s: Implement dedicated kasan_init_region()")
Reported-by: Erhard Furtner <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215169
Link: https://lore.kernel.org/r/15cbc3439d4ad988b225e2119ec99502a5cc6ad3.1638261744.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/kasan/book3s_32.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/mm/kasan/book3s_32.c b/arch/powerpc/mm/kasan/book3s_32.c
index 202bd260a0095..35b287b0a8da4 100644
--- a/arch/powerpc/mm/kasan/book3s_32.c
+++ b/arch/powerpc/mm/kasan/book3s_32.c
@@ -19,7 +19,8 @@ int __init kasan_init_region(void *start, size_t size)
block = memblock_alloc(k_size, k_size_base);
if (block && k_size_base >= SZ_128K && k_start == ALIGN(k_start, k_size_base)) {
- int k_size_more = 1 << (ffs(k_size - k_size_base) - 1);
+ int shift = ffs(k_size - k_size_base);
+ int k_size_more = shift ? 1 << (shift - 1) : 0;
setbat(-1, k_start, __pa(block), k_size_base, PAGE_KERNEL);
if (k_size_more >= SZ_128K)
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit fd4eb90b164442cb1e9909f7845e12a0835ac699 ]
Commit ab7c01fdc3cf ("mips: Add MIPS Release 5 support") adds the two
configs CPU_MIPS32_R5 and CPU_MIPS64_R5, which depend on the corresponding
SYS_HAS_CPU_MIPS32_R5 and SYS_HAS_CPU_MIPS64_R5, respectively.
The config SYS_HAS_CPU_MIPS32_R5 was already introduced with commit
c5b367835cfc ("MIPS: Add support for XPA."); the config
SYS_HAS_CPU_MIPS64_R5, however, was never introduced.
Hence, ./scripts/checkkconfigsymbols.py warns:
SYS_HAS_CPU_MIPS64_R5
Referencing files: arch/mips/Kconfig, arch/mips/include/asm/cpu-type.h
Add the definition for config SYS_HAS_CPU_MIPS64_R5 under the assumption
that SYS_HAS_CPU_MIPS64_R5 follows the same pattern as the existing
SYS_HAS_CPU_MIPS32_R5 and SYS_HAS_CPU_MIPS64_R6.
Fixes: ab7c01fdc3cf ("mips: Add MIPS Release 5 support")
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 23654ccdbfb12..0200ebb7a0144 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1993,6 +1993,10 @@ config SYS_HAS_CPU_MIPS64_R1
config SYS_HAS_CPU_MIPS64_R2
bool
+config SYS_HAS_CPU_MIPS64_R5
+ bool
+ select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+
config SYS_HAS_CPU_MIPS64_R6
bool
select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
--
2.34.1
From: Marek Behún <[email protected]>
[ Upstream commit 62480772263ab6b52e758f2346c70a526abd1d28 ]
Add generic compatible string "ns16550a" to serial port nodes of Armada
38x.
This makes it possible to use earlycon.
Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/armada-38x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91f..df3c8d1d8f641 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -168,7 +168,7 @@
};
uart0: serial@12000 {
- compatible = "marvell,armada-38x-uart";
+ compatible = "marvell,armada-38x-uart", "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
};
uart1: serial@12100 {
- compatible = "marvell,armada-38x-uart";
+ compatible = "marvell,armada-38x-uart", "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
--
2.34.1
From: Xiongfeng Wang <[email protected]>
[ Upstream commit d7061627d701c90e1cac1e1e60c45292f64f3470 ]
It turns out to be possible for hotplugging out a device to reach the
stage of tearing down the device's group and default domain before the
domain's flush queue has drained naturally. At this point, it is then
possible for the timeout to expire just before the del_timer() call
in free_iova_flush_queue(), such that we then proceed to free the FQ
resources while fq_flush_timeout() is still accessing them on another
CPU. Crashes due to this have been observed in the wild while removing
NVMe devices.
Close the race window by using del_timer_sync() to safely wait for any
active timeout handler to finish before we start to free things. We
already avoid any locking in free_iova_flush_queue() since the FQ is
supposed to be inactive anyway, so the potential deadlock scenario does
not apply.
Fixes: 9a005a800ae8 ("iommu/iova: Add flush timer")
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Xiongfeng Wang <[email protected]>
[ rm: rewrite commit message ]
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/0a365e5b07f14b7344677ad6a9a734966a8422ce.1639753638.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/iova.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index 9e8bc802ac053..920fcc27c9a1e 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -83,8 +83,7 @@ static void free_iova_flush_queue(struct iova_domain *iovad)
if (!has_iova_flush_queue(iovad))
return;
- if (timer_pending(&iovad->fq_timer))
- del_timer(&iovad->fq_timer);
+ del_timer_sync(&iovad->fq_timer);
fq_destroy_all_entries(iovad);
--
2.34.1
From: Pingfan Liu <[email protected]>
[ Upstream commit b398123bff3bcbc1facb0f29bf6e7b9f1bc55931 ]
On arm64, during kdump kernel saves vmcore, it runs into the following bug:
...
[ 15.148919] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmem_cache_node' (offset 0, size 4096)!
[ 15.159707] ------------[ cut here ]------------
[ 15.164311] kernel BUG at mm/usercopy.c:99!
[ 15.168482] Internal error: Oops - BUG: 0 [#1] SMP
[ 15.173261] Modules linked in: xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce sbsa_gwdt ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm_ttm_helper ttm drm nvme nvme_core xgene_hwmon i2c_designware_platform i2c_designware_core dm_mirror dm_region_hash dm_log dm_mod overlay squashfs zstd_decompress loop
[ 15.206186] CPU: 0 PID: 542 Comm: cp Not tainted 5.16.0-rc4 #1
[ 15.212006] Hardware name: GIGABYTE R272-P30-JG/MP32-AR0-JG, BIOS F12 (SCP: 1.5.20210426) 05/13/2021
[ 15.221125] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 15.228073] pc : usercopy_abort+0x9c/0xa0
[ 15.232074] lr : usercopy_abort+0x9c/0xa0
[ 15.236070] sp : ffff8000121abba0
[ 15.239371] x29: ffff8000121abbb0 x28: 0000000000003000 x27: 0000000000000000
[ 15.246494] x26: 0000000080000400 x25: 0000ffff885c7000 x24: 0000000000000000
[ 15.253617] x23: 000007ff80400000 x22: ffff07ff80401000 x21: 0000000000000001
[ 15.260739] x20: 0000000000001000 x19: ffff07ff80400000 x18: ffffffffffffffff
[ 15.267861] x17: 656a626f2042554c x16: 53206d6f72662064 x15: 6574636574656420
[ 15.274983] x14: 74706d6574746120 x13: 2129363930342065 x12: 7a6973202c302074
[ 15.282105] x11: ffffc8b041d1b148 x10: 00000000ffff8000 x9 : ffffc8b04012812c
[ 15.289228] x8 : 00000000ffff7fff x7 : ffffc8b041d1b148 x6 : 0000000000000000
[ 15.296349] x5 : 0000000000000000 x4 : 0000000000007fff x3 : 0000000000000000
[ 15.303471] x2 : 0000000000000000 x1 : ffff07ff8c064800 x0 : 000000000000006b
[ 15.310593] Call trace:
[ 15.313027] usercopy_abort+0x9c/0xa0
[ 15.316677] __check_heap_object+0xd4/0xf0
[ 15.320762] __check_object_size.part.0+0x160/0x1e0
[ 15.325628] __check_object_size+0x2c/0x40
[ 15.329711] copy_oldmem_page+0x7c/0x140
[ 15.333623] read_from_oldmem.part.0+0xfc/0x1c0
[ 15.338142] __read_vmcore.constprop.0+0x23c/0x350
[ 15.342920] read_vmcore+0x28/0x34
[ 15.346309] proc_reg_read+0xb4/0xf0
[ 15.349871] vfs_read+0xb8/0x1f0
[ 15.353088] ksys_read+0x74/0x100
[ 15.356390] __arm64_sys_read+0x28/0x34
...
This bug introduced by commit b261dba2fdb2 ("arm64: kdump: Remove custom
linux,usable-memory-range handling"), which moves
memblock_cap_memory_range() to fdt, but it breaches the rules that
memblock_cap_memory_range() should come after memblock_add() etc as said
in commit e888fa7bb882 ("memblock: Check memory add/cap ordering").
As a consequence, the virtual address set up by copy_oldmem_page() does
not bail out from the test of virt_addr_valid() in check_heap_object(),
and finally hits the BUG_ON().
Since memblock allocator has no idea about when the memblock is fully
populated, while efi_init() is aware, so tackling this issue by calling the
interface early_init_dt_check_for_usable_mem_range() exposed by of/fdt.
Fixes: b261dba2fdb2 ("arm64: kdump: Remove custom linux,usable-memory-range handling")
Signed-off-by: Pingfan Liu <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Zhen Lei <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Frank Rowand <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: [email protected]
To: [email protected]
To: [email protected]
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/efi/efi-init.c | 5 +++++
drivers/of/fdt.c | 2 +-
include/linux/of_fdt.h | 2 ++
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c
index b19ce1a83f91a..b2c829e95bd14 100644
--- a/drivers/firmware/efi/efi-init.c
+++ b/drivers/firmware/efi/efi-init.c
@@ -235,6 +235,11 @@ void __init efi_init(void)
}
reserve_regions();
+ /*
+ * For memblock manipulation, the cap should come after the memblock_add().
+ * And now, memblock is fully populated, it is time to do capping.
+ */
+ early_init_dt_check_for_usable_mem_range();
efi_esrt_init();
efi_mokvar_table_init();
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 105b1a47905ab..32e5e782d43da 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -975,7 +975,7 @@ static unsigned long chosen_node_offset = -FDT_ERR_NOTFOUND;
* early_init_dt_check_for_usable_mem_range - Decode usable memory range
* location from flat tree
*/
-static void __init early_init_dt_check_for_usable_mem_range(void)
+void __init early_init_dt_check_for_usable_mem_range(void)
{
const __be32 *prop;
int len;
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index cf6a65b94d40e..6508b97dbf1d2 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -62,6 +62,7 @@ extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
int depth, void *data);
extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
int depth, void *data);
+extern void early_init_dt_check_for_usable_mem_range(void);
extern int early_init_dt_scan_chosen_stdout(void);
extern void early_init_fdt_scan_reserved_mem(void);
extern void early_init_fdt_reserve_self(void);
@@ -87,6 +88,7 @@ extern void unflatten_and_copy_device_tree(void);
extern void early_init_devtree(void *);
extern void early_get_first_memblock_info(void *, phys_addr_t *);
#else /* CONFIG_OF_EARLY_FLATTREE */
+static inline void early_init_dt_check_for_usable_mem_range(void) {}
static inline int early_init_dt_scan_chosen_stdout(void) { return -ENODEV; }
static inline void early_init_fdt_scan_reserved_mem(void) {}
static inline void early_init_fdt_reserve_self(void) {}
--
2.34.1
From: Todd Kjos <[email protected]>
[ Upstream commit fe6b1869243f23a485a106c214bcfdc7aa0ed593 ]
If a memory copy function fails to copy the whole buffer,
a positive integar with the remaining bytes is returned.
In binder_translate_fd_array() this can result in an fd being
skipped due to the failed copy, but the loop continues
processing fds since the early return condition expects a
negative integer on error.
Fix by returning "ret > 0 ? -EINVAL : ret" to handle this case.
Fixes: bb4a2e48d510 ("binder: return errors from buffer copy functions")
Suggested-by: Dan Carpenter <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Todd Kjos <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/android/binder.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index c75fb600740cc..7d29d3d931a79 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2269,8 +2269,8 @@ static int binder_translate_fd_array(struct binder_fd_array_object *fda,
if (!ret)
ret = binder_translate_fd(fd, offset, t, thread,
in_reply_to);
- if (ret < 0)
- return ret;
+ if (ret)
+ return ret > 0 ? -EINVAL : ret;
}
return 0;
}
--
2.34.1
From: Michael Ellerman <[email protected]>
[ Upstream commit 314f6c23dd8d417281eb9e8a516dd98036f2e7b3 ]
When CONFIG_PPC_RFI_SRR_DEBUG=y we check that NIP and SRR0 match when
returning from interrupts. This can trigger falsely if NIP has either of
its two low bits set via sigreturn or ptrace, while SRR0 has its low two
bits masked in hardware.
As a quick fix make sure to mask the low bits before doing the check.
Fixes: 59dc5bfca0cb ("powerpc/64s: avoid reloading (H)SRR registers if they are still valid")
Reported-by: Sachin Sant <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Tested-by: Sachin Sant <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/interrupt_64.S | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/interrupt_64.S b/arch/powerpc/kernel/interrupt_64.S
index ec950b08a8dcc..894588b2381e5 100644
--- a/arch/powerpc/kernel/interrupt_64.S
+++ b/arch/powerpc/kernel/interrupt_64.S
@@ -30,6 +30,7 @@ COMPAT_SYS_CALL_TABLE:
.ifc \srr,srr
mfspr r11,SPRN_SRR0
ld r12,_NIP(r1)
+ clrrdi r12,r12,2
100: tdne r11,r12
EMIT_BUG_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
mfspr r11,SPRN_SRR1
@@ -39,6 +40,7 @@ COMPAT_SYS_CALL_TABLE:
.else
mfspr r11,SPRN_HSRR0
ld r12,_NIP(r1)
+ clrrdi r12,r12,2
100: tdne r11,r12
EMIT_BUG_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
mfspr r11,SPRN_HSRR1
--
2.34.1
From: Avihai Horon <[email protected]>
[ Upstream commit 483d805191a23191f8294bbf9b4e94836f5d92e4 ]
Currently, ib_find_gid() will stop searching after encountering the first
empty GID table entry. This behavior is wrong since neither IB nor RoCE
spec enforce tightly packed GID tables.
For example, when a valid GID entry exists at index N, and if a GID entry
is empty at index N-1, ib_find_gid() will fail to find the valid entry.
Fix it by making ib_find_gid() continue searching even after encountering
missing entries.
Fixes: 5eb620c81ce3 ("IB/core: Add helpers for uncached GID and P_Key searches")
Link: https://lore.kernel.org/r/e55d331b96cecfc2cf19803d16e7109ea966882d.1639055490.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Mark Zhang <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/device.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index f4814bb7f082f..6ab46648af909 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -2461,7 +2461,8 @@ int ib_find_gid(struct ib_device *device, union ib_gid *gid,
++i) {
ret = rdma_query_gid(device, port, i, &tmp_gid);
if (ret)
- return ret;
+ continue;
+
if (!memcmp(&tmp_gid, gid, sizeof *gid)) {
*port_num = port;
if (index)
--
2.34.1
From: Baruch Siach <[email protected]>
[ Upstream commit 94a4950a4acff39b5847cc1fee4f65e160813493 ]
The cell_count field of of_phandle_iterator is the number of cells we
expect in the phandle arguments list when cells_name is missing. The
error message should show the number of cells we actually see.
Fixes: af3be70a3211 ("of: Improve of_phandle_iterator_next() error message")
Cc: Florian Fainelli <[email protected]>
Signed-off-by: Baruch Siach <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/96519ac55be90a63fa44afe01480c30d08535465.1640881913.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/base.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 0ac17256258d5..211c4da5abef6 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1327,9 +1327,9 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it)
* property data length
*/
if (it->cur + count > it->list_end) {
- pr_err("%pOF: %s = %d found %d\n",
+ pr_err("%pOF: %s = %d found %td\n",
it->parent, it->cells_name,
- count, it->cell_count);
+ count, it->list_end - it->cur);
goto err;
}
}
--
2.34.1
From: Wei Yongjun <[email protected]>
[ Upstream commit 5a4bb6a8e981d3d0d492aa38412ee80b21033177 ]
Fault injection test report debugfs entry leak as follows:
debugfs: Directory 'hci0' with parent 'bluetooth' already present!
When register_pm_notifier() failed in hci_register_dev(), the debugfs
create by debugfs_create_dir() do not removed in the error handing path.
Add the remove debugfs code to fix it.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 325db9c4c6109..53f1b08017aab 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3999,6 +3999,7 @@ int hci_register_dev(struct hci_dev *hdev)
return id;
err_wqueue:
+ debugfs_remove_recursive(hdev->debugfs);
destroy_workqueue(hdev->workqueue);
destroy_workqueue(hdev->req_workqueue);
err:
--
2.34.1
From: Qiang Yu <[email protected]>
[ Upstream commit 89636a06fa2ee7826a19c39c19a9bc99ab9340a9 ]
Otherwise get following warning:
DMA-API: lima 1c40000.gpu: mapping sg segment longer than device claims to support [len=4149248] [max=65536]
See: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5496
Reviewed-by: Vasily Khoruzhick <[email protected]>
Reported-by: Roman Stratiienko <[email protected]>
Signed-off-by: Qiang Yu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/lima/lima_device.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/lima/lima_device.c b/drivers/gpu/drm/lima/lima_device.c
index 65fdca366e41f..36c9905894278 100644
--- a/drivers/gpu/drm/lima/lima_device.c
+++ b/drivers/gpu/drm/lima/lima_device.c
@@ -357,6 +357,7 @@ int lima_device_init(struct lima_device *ldev)
int err, i;
dma_set_coherent_mask(ldev->dev, DMA_BIT_MASK(32));
+ dma_set_max_seg_size(ldev->dev, UINT_MAX);
err = lima_clk_init(ldev);
if (err)
--
2.34.1
From: Alexander Aring <[email protected]>
[ Upstream commit 6c2e3bf68f3e5e5a647aa52be246d5f552d7496d ]
This patch fixes the following crash by receiving a invalid message:
[ 160.672220] ==================================================================
[ 160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370
[ 160.679659] Read of size 8 at addr 00000000deadbeef by task kworker/u32:13/319
[ 160.681447]
[ 160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399
[ 160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+6ede71a5 04/01/2014
[ 160.685574] Workqueue: dlm_recv process_recv_sockets
[ 160.686721] Call Trace:
[ 160.687310] dump_stack_lvl+0x56/0x6f
[ 160.688169] ? dlm_user_add_ast+0xc3/0x370
[ 160.689116] kasan_report.cold.14+0x116/0x11b
[ 160.690138] ? dlm_user_add_ast+0xc3/0x370
[ 160.690832] dlm_user_add_ast+0xc3/0x370
[ 160.691502] _receive_unlock_reply+0x103/0x170
[ 160.692241] _receive_message+0x11df/0x1ec0
[ 160.692926] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.693700] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.694427] ? lock_acquire+0x175/0x400
[ 160.695058] ? do_purge.isra.51+0x200/0x200
[ 160.695744] ? lock_acquired+0x360/0x5d0
[ 160.696400] ? lock_contended+0x6a0/0x6a0
[ 160.697055] ? lock_release+0x21d/0x5e0
[ 160.697686] ? lock_is_held_type+0xe0/0x110
[ 160.698352] ? lock_is_held_type+0xe0/0x110
[ 160.699026] ? ___might_sleep+0x1cc/0x1e0
[ 160.699698] ? dlm_wait_requestqueue+0x94/0x140
[ 160.700451] ? dlm_process_requestqueue+0x240/0x240
[ 160.701249] ? down_write_killable+0x2b0/0x2b0
[ 160.701988] ? do_raw_spin_unlock+0xa2/0x130
[ 160.702690] dlm_receive_buffer+0x1a5/0x210
[ 160.703385] dlm_process_incoming_buffer+0x726/0x9f0
[ 160.704210] receive_from_sock+0x1c0/0x3b0
[ 160.704886] ? dlm_tcp_shutdown+0x30/0x30
[ 160.705561] ? lock_acquire+0x175/0x400
[ 160.706197] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.706941] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.707681] process_recv_sockets+0x32/0x40
[ 160.708366] process_one_work+0x55e/0xad0
[ 160.709045] ? pwq_dec_nr_in_flight+0x110/0x110
[ 160.709820] worker_thread+0x65/0x5e0
[ 160.710423] ? process_one_work+0xad0/0xad0
[ 160.711087] kthread+0x1ed/0x220
[ 160.711628] ? set_kthread_struct+0x80/0x80
[ 160.712314] ret_from_fork+0x22/0x30
The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is 00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.
It can be reproduced with two cluster nodes.
node 2:
dlm_tool join test
echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks
echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters
node 1:
dlm_tool join test
python:
foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \
m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE)
newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb")
newFile.write(bytes(foo))
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lock.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index c502c065d0075..28d1f35b11a4d 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -3973,6 +3973,14 @@ static int validate_message(struct dlm_lkb *lkb, struct dlm_message *ms)
int from = ms->m_header.h_nodeid;
int error = 0;
+ /* currently mixing of user/kernel locks are not supported */
+ if (ms->m_flags & DLM_IFL_USER && ~lkb->lkb_flags & DLM_IFL_USER) {
+ log_error(lkb->lkb_resource->res_ls,
+ "got user dlm message for a kernel lock");
+ error = -EINVAL;
+ goto out;
+ }
+
switch (ms->m_type) {
case DLM_MSG_CONVERT:
case DLM_MSG_UNLOCK:
@@ -4001,6 +4009,7 @@ static int validate_message(struct dlm_lkb *lkb, struct dlm_message *ms)
error = -EINVAL;
}
+out:
if (error)
log_error(lkb->lkb_resource->res_ls,
"ignore invalid message %d from %d %x %x %x %d",
--
2.34.1
From: Sameer Pujar <[email protected]>
[ Upstream commit 146b3a77af8091cabbd1decc51d67799e69682d2 ]
Tegra194 does not really have "hda2codec_2x" related reset. Hence drop
this entry to reflect actual HW.
Fixes: 4878cc0c9fab ("arm64: tegra: Add HDA controller on Tegra194")
Signed-off-by: Sameer Pujar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index c8250a3f7891f..510d2974470cd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -818,9 +818,8 @@
<&bpmp TEGRA194_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&bpmp TEGRA194_RESET_HDA>,
- <&bpmp TEGRA194_RESET_HDA2HDMICODEC>,
- <&bpmp TEGRA194_RESET_HDA2CODEC_2X>;
- reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+ <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
+ reset-names = "hda", "hda2hdmi";
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 6f03055d508ff4feb8db02ba3df9303a1db8d381 ]
The MIPS BMC63XX subarch does not provide/support clk_set_parent().
This causes build errors in a few drivers, so add a simple implementation
of that function so that callers of it will build without errors.
Fixes these build errors:
ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/bcm63xx/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 1c91064cb448b..6e6756e8fa0a9 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -387,6 +387,12 @@ struct clk *clk_get_parent(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_parent);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
unsigned long clk_get_rate(struct clk *clk)
{
if (!clk)
--
2.34.1
From: Zheyu Ma <[email protected]>
[ Upstream commit b13203032e679674c7c518f52a7ec0801ca3a829 ]
A out-of-bounds bug can be triggered by an interrupt, the reason for
this bug is the lack of checking of register values.
In flexcop_pci_isr, the driver reads value from a register and uses it as
a dma address. Finally, this address will be passed to the count parameter
of find_next_packet. If this value is larger than the size of dma, the
index of buffer will be out-of-bounds.
Fix this by adding a check after reading the value of the register.
The following KASAN report reveals it:
BUG: KASAN: slab-out-of-bounds in find_next_packet
drivers/media/dvb-core/dvb_demux.c:528 [inline]
BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter
drivers/media/dvb-core/dvb_demux.c:572 [inline]
BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420
drivers/media/dvb-core/dvb_demux.c:603
Read of size 1 at addr ffff8880608c00a0 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
print_address_description+0x78/0x290 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x25b/0x380 mm/kasan/report.c:412
__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:430
find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline]
_dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline]
dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603
flexcop_pass_dmx_data+0x2e/0x40 drivers/media/common/b2c2/flexcop.c:167
flexcop_pci_isr+0x3d1/0x5d0 drivers/media/pci/b2c2/flexcop-pci.c:212
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 62 2f 8c 48 89 e5 e8 fb 31
e8 f8 8b 05 75 4f 8e 03 85 c0 7e 07 0f 00 2d 8a 61 66 00 fb f4 <5d> c3
90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde44c8 RCX: ffffffff88a11285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2f6200
RBP: ffff88806b71fcc8 R08: fffffbfff185ec40 R09: fffffbfff185ec40
R10: 0000000000000001 R11: fffffbfff185ec40 R12: 0000000000000002
R13: ffffffff8be9d6e0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Allocated by task 1:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x11/0x20 mm/kasan/kasan.c:490
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2741 [inline]
slab_alloc mm/slub.c:2749 [inline]
kmem_cache_alloc+0xeb/0x280 mm/slub.c:2754
kmem_cache_zalloc include/linux/slab.h:699 [inline]
__kernfs_new_node+0xe2/0x6f0 fs/kernfs/dir.c:633
kernfs_new_node+0x9a/0x120 fs/kernfs/dir.c:693
__kernfs_create_file+0x5f/0x340 fs/kernfs/file.c:992
sysfs_add_file_mode_ns+0x22a/0x4e0 fs/sysfs/file.c:306
create_files fs/sysfs/group.c:63 [inline]
internal_create_group+0x34e/0xc30 fs/sysfs/group.c:147
sysfs_create_group fs/sysfs/group.c:173 [inline]
sysfs_create_groups+0x9c/0x140 fs/sysfs/group.c:200
driver_add_groups+0x3e/0x50 drivers/base/driver.c:129
bus_add_driver+0x3a5/0x790 drivers/base/bus.c:684
driver_register+0x1cd/0x410 drivers/base/driver.c:170
__pci_register_driver+0x197/0x200 drivers/pci/pci-driver.c:1411
cx88_audio_pci_driver_init+0x23/0x25 drivers/media/pci/cx88/cx88-alsa.c:
1017
do_one_initcall+0xe0/0x610 init/main.c:884
do_initcall_level init/main.c:952 [inline]
do_initcalls init/main.c:960 [inline]
do_basic_setup init/main.c:978 [inline]
kernel_init_freeable+0x4d0/0x592 init/main.c:1145
kernel_init+0x18/0x190 init/main.c:1062
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8880608c0000
which belongs to the cache kernfs_node_cache of size 160
The buggy address is located 0 bytes to the right of
160-byte region [ffff8880608c0000, ffff8880608c00a0)
The buggy address belongs to the page:
page:ffffea0001823000 count:1 mapcount:0 mapping:ffff88806bed1e00
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 dead000000000100 dead000000000200 ffff88806bed1e00
raw: 0000000000000000 0000000000240024 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00
^
ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Link: https://lore.kernel.org/linux-media/[email protected]
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/b2c2/flexcop-pci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c
index 6a4c7cb0ad0f9..486c8ec0fa60d 100644
--- a/drivers/media/pci/b2c2/flexcop-pci.c
+++ b/drivers/media/pci/b2c2/flexcop-pci.c
@@ -185,6 +185,8 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
dma_addr_t cur_addr =
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
+ if (cur_pos > fc_pci->dma[0].size * 2)
+ goto error;
deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
jiffies_to_usecs(jiffies - fc_pci->last_irq),
@@ -225,6 +227,7 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
ret = IRQ_NONE;
}
+error:
spin_unlock_irqrestore(&fc_pci->irq_lock, flags);
return ret;
}
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit f91231eeeed752119f49eb6620cae44ec745a007 ]
bpf_link__detach() was confused with bpf_link__destroy() and leaves
leaked FD in the process. Fix the problem.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Hengqi Chen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
index 59adb4715394f..3c85247f96f95 100644
--- a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
+++ b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
@@ -204,8 +204,8 @@ static int pass_ack(struct migrate_reuseport_test_case *test_case)
{
int err;
- err = bpf_link__detach(test_case->link);
- if (!ASSERT_OK(err, "bpf_link__detach"))
+ err = bpf_link__destroy(test_case->link);
+ if (!ASSERT_OK(err, "bpf_link__destroy"))
return -1;
test_case->link = NULL;
--
2.34.1
From: Shengjiu Wang <[email protected]>
[ Upstream commit 3349b3d0c63b8b6fcca58156d72407f0b2e101ac ]
The SAI on i.MX8MQ don't support one2one ratio for mclk:bclk, so
the mclk frequency exceeds the supported range of codec for
the case that sample rate is larger than 705kHZ and format is
S32_LE. Update the supported width for such case.
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-card.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/sound/soc/fsl/imx-card.c b/sound/soc/fsl/imx-card.c
index 58fd0639a0698..f6b54de76dc3c 100644
--- a/sound/soc/fsl/imx-card.c
+++ b/sound/soc/fsl/imx-card.c
@@ -553,8 +553,23 @@ static int imx_card_parse_of(struct imx_card_data *data)
link_data->cpu_sysclk_id = FSL_SAI_CLK_MAST1;
/* sai may support mclk/bclk = 1 */
- if (of_find_property(np, "fsl,mclk-equal-bclk", NULL))
+ if (of_find_property(np, "fsl,mclk-equal-bclk", NULL)) {
link_data->one2one_ratio = true;
+ } else {
+ int i;
+
+ /*
+ * i.MX8MQ don't support one2one ratio, then
+ * with ak4497 only 16bit case is supported.
+ */
+ for (i = 0; i < ARRAY_SIZE(ak4497_fs_mul); i++) {
+ if (ak4497_fs_mul[i].rmin == 705600 &&
+ ak4497_fs_mul[i].rmax == 768000) {
+ ak4497_fs_mul[i].wmin = 32;
+ ak4497_fs_mul[i].wmax = 32;
+ }
+ }
+ }
}
link->cpus->of_node = args.np;
--
2.34.1
From: Yang Li <[email protected]>
[ Upstream commit d9f31aeaa1e5aefa68130878af3c3513d41c1e2d ]
do_div() does a 64-by-32 division. Here the divisor is an
unsigned long which on some platforms is 64 bit wide. So use
div64_ul instead of do_div to avoid a possible truncation.
Eliminate the following coccicheck warning:
./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING:
do_div() does a 64-by-32 division, please consider using div64_ul
instead.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/renesas/ravb_main.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 0f85f2d97b18d..4e08b7219403c 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -30,8 +30,7 @@
#include <linux/spinlock.h>
#include <linux/sys_soc.h>
#include <linux/reset.h>
-
-#include <asm/div64.h>
+#include <linux/math64.h>
#include "ravb.h"
@@ -2061,8 +2060,7 @@ static int ravb_set_gti(struct net_device *ndev)
if (!rate)
return -EINVAL;
- inc = 1000000000ULL << 20;
- do_div(inc, rate);
+ inc = div64_ul(1000000000ULL << 20, rate);
if (inc < GTI_TIV_MIN || inc > GTI_TIV_MAX) {
dev_err(dev, "gti.tiv increment 0x%llx is outside the range 0x%x - 0x%x\n",
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 348df8035301dd212e3cc2860efe4c86cb0d3303 ]
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.
Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():
hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
| in saa7146_vv_init().
|
|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7146/hexium_orion.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/saa7146/hexium_orion.c b/drivers/media/pci/saa7146/hexium_orion.c
index 39d14c179d229..2eb4bee16b71f 100644
--- a/drivers/media/pci/saa7146/hexium_orion.c
+++ b/drivers/media/pci/saa7146/hexium_orion.c
@@ -355,10 +355,16 @@ static struct saa7146_ext_vv vv_data;
static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
struct hexium *hexium = (struct hexium *) dev->ext_priv;
+ int ret;
DEB_EE("\n");
- saa7146_vv_init(dev, &vv_data);
+ ret = saa7146_vv_init(dev, &vv_data);
+ if (ret) {
+ pr_err("Error in saa7146_vv_init()\n");
+ return ret;
+ }
+
vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit ac56760a8bbb4e654b2fd54e5de79dd5d72f937d ]
There are two occurrences where the variable 'asd' is dereferenced
before check. Fix this issue by using the variable after the check.
Link: https://lore.kernel.org/linux-media/20211122074122.GA6581@kili/
Link: https://lore.kernel.org/linux-media/[email protected]
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_cmd.c | 3 ++-
drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index 1ddb9c815a3cb..ef0b0963cf930 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -5224,7 +5224,7 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
int (*configure_pp_input)(struct atomisp_sub_device *asd,
unsigned int width, unsigned int height) =
configure_pp_input_nop;
- u16 stream_index = atomisp_source_pad_to_stream_id(asd, source_pad);
+ u16 stream_index;
const struct atomisp_in_fmt_conv *fc;
int ret, i;
@@ -5233,6 +5233,7 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
__func__, vdev->name);
return -EINVAL;
}
+ stream_index = atomisp_source_pad_to_stream_id(asd, source_pad);
v4l2_fh_init(&fh.vfh, vdev);
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index 54624f8814e04..b7dda4b96d49c 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -1123,7 +1123,7 @@ int __atomisp_reqbufs(struct file *file, void *fh,
struct ia_css_frame *frame;
struct videobuf_vmalloc_memory *vm_mem;
u16 source_pad = atomisp_subdev_source_pad(vdev);
- u16 stream_id = atomisp_source_pad_to_stream_id(asd, source_pad);
+ u16 stream_id;
int ret = 0, i = 0;
if (!asd) {
@@ -1131,6 +1131,7 @@ int __atomisp_reqbufs(struct file *file, void *fh,
__func__, vdev->name);
return -EINVAL;
}
+ stream_id = atomisp_source_pad_to_stream_id(asd, source_pad);
if (req->count == 0) {
mutex_lock(&pipe->capq.vb_lock);
--
2.34.1
From: Joerg Roedel <[email protected]>
[ Upstream commit 71d5049b053876afbde6c3273250b76935494ab2 ]
Move the switching code into a function so that it can be re-used and
add a global TLB flush. This makes sure that usage of memory which is
not mapped in the trampoline page-table is reliably caught.
Also move the clearing of CR4.PCIDE before the CR3 switch because the
cr4_clear_bits() function will access data not mapped into the
trampoline page-table.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/realmode.h | 1 +
arch/x86/kernel/reboot.c | 12 ++----------
arch/x86/realmode/init.c | 26 ++++++++++++++++++++++++++
3 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 5db5d083c8732..331474b150f16 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -89,6 +89,7 @@ static inline void set_real_mode_mem(phys_addr_t mem)
}
void reserve_real_mode(void);
+void load_trampoline_pgtable(void);
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 0a40df66a40de..fa700b46588e0 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -113,17 +113,9 @@ void __noreturn machine_real_restart(unsigned int type)
spin_unlock(&rtc_lock);
/*
- * Switch back to the initial page table.
+ * Switch to the trampoline page table.
*/
-#ifdef CONFIG_X86_32
- load_cr3(initial_page_table);
-#else
- write_cr3(real_mode_header->trampoline_pgd);
-
- /* Exiting long mode will fail if CR4.PCIDE is set. */
- if (boot_cpu_has(X86_FEATURE_PCID))
- cr4_clear_bits(X86_CR4_PCIDE);
-#endif
+ load_trampoline_pgtable();
/* Jump to the identity-mapped low memory code */
#ifdef CONFIG_X86_32
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index d3eee1ebcf1d5..1d20ed4b28729 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -17,6 +17,32 @@ u32 *trampoline_cr4_features;
/* Hold the pgd entry used on booting additional CPUs */
pgd_t trampoline_pgd_entry;
+void load_trampoline_pgtable(void)
+{
+#ifdef CONFIG_X86_32
+ load_cr3(initial_page_table);
+#else
+ /*
+ * This function is called before exiting to real-mode and that will
+ * fail with CR4.PCIDE still set.
+ */
+ if (boot_cpu_has(X86_FEATURE_PCID))
+ cr4_clear_bits(X86_CR4_PCIDE);
+
+ write_cr3(real_mode_header->trampoline_pgd);
+#endif
+
+ /*
+ * The CR3 write above will not flush global TLB entries.
+ * Stale, global entries from previous page tables may still be
+ * present. Flush those stale entries.
+ *
+ * This ensures that memory accessed while running with
+ * trampoline_pgd is *actually* mapped into trampoline_pgd.
+ */
+ __flush_tlb_all();
+}
+
void __init reserve_real_mode(void)
{
phys_addr_t mem;
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit ae80b6033834342601e99f74f6a62ff5092b1cee ]
Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref
when ar->tx_cmd->odata is NULL. The patch adds a null check to
prevent such case.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
ar5523_cmd+0x46a/0x581 [ar5523]
ar5523_probe.cold+0x1b7/0x18da [ar5523]
? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523]
? __pm_runtime_set_status+0x54a/0x8f0
? _raw_spin_trylock_bh+0x120/0x120
? pm_runtime_barrier+0x220/0x220
? __pm_runtime_resume+0xb1/0xf0
usb_probe_interface+0x25b/0x710
really_probe+0x209/0x5d0
driver_probe_device+0xc6/0x1b0
device_driver_attach+0xe2/0x120
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START,
I got the null-ptr-deref bug. I believe the bug is triggerable whenever
cmd->odata is NULL. After patching, I tested with the same input and no
longer see the KASAN report.
This was NOT tested on a real device.
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ar5523/ar5523.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 49cc4b7ed5163..1baec4b412c8d 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -153,6 +153,10 @@ static void ar5523_cmd_rx_cb(struct urb *urb)
ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START");
return;
}
+ if (!cmd->odata) {
+ ar5523_err(ar, "Unexpected WDCMSG_TARGET_START reply");
+ return;
+ }
memcpy(cmd->odata, hdr + 1, sizeof(u32));
cmd->olen = sizeof(u32);
cmd->res = 0;
--
2.34.1
From: Wan Jiabing <[email protected]>
[ Upstream commit 85744f2d938c5f3cfc44cb6533c157469634da93 ]
Fix following coccicheck warning:
./arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c:156:1-33: Function
for_each_matching_node_and_match should have of_node_put() before break
and goto.
Early exits from for_each_matching_node_and_match() should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index ee949255ced3f..09ef73b99dd86 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void)
return -ENODEV;
for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
- if (!of_device_is_available(np))
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
break;
+ }
ret = of_property_read_u32(np, "reg", &addr);
if (ret) /* Skip invalid entry and continue */
@@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void)
quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
if (!quirk) {
ret = -ENOMEM;
+ of_node_put(np);
goto err_mem;
}
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit d431dfb764b145369be820fcdfd50f2159b9bbc2 ]
It turns out that there is a WMI object which controls the PWM2 device
used for the keyboard backlight and that WMI object also provides some
other useful functionality.
The upcoming lenovo-yogabook-wmi driver will offer both backlight
control and the other functionality, so there no longer is a need
to have the lpss-pwm driver binding to PWM2 for backlight control;
and this is now actually undesirable because this will cause both
the WMI code and the lpss-pwm driver to poke at the same PWM
controller.
Drop the always-present quirk for the PWM2 ACPI-device, so that the
lpss-pwm controller will no longer bind to it.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/x86/utils.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index f22f23933063b..3bcac98f6eca6 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -54,10 +54,6 @@ static const struct always_present_id always_present_ids[] = {
ENTRY("80860F09", "1", X86_MATCH(ATOM_SILVERMONT), {}),
ENTRY("80862288", "1", X86_MATCH(ATOM_AIRMONT), {}),
- /* Lenovo Yoga Book uses PWM2 for keyboard backlight control */
- ENTRY("80862289", "2", X86_MATCH(ATOM_AIRMONT), {
- DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
- }),
/*
* The INT0002 device is necessary to clear wakeup interrupt sources
* on Cherry Trail devices, without it we get nobody cared IRQ msgs.
--
2.34.1
From: Sebastian Gottschall <[email protected]>
[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ]
While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.
Signed-off-by: Sebastian Gottschall <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/htt_tx.c | 3 +++
drivers/net/wireless/ath/ath10k/txrx.c | 2 --
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index d6b8bdcef4160..b793eac2cfac8 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -147,6 +147,9 @@ void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
htt->num_pending_tx--;
if (htt->num_pending_tx == htt->max_num_pending_tx - 1)
ath10k_mac_tx_unlock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
+
+ if (htt->num_pending_tx == 0)
+ wake_up(&htt->empty_tx_wq);
}
int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 7c9ea0c073d8b..6f8b642188941 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -82,8 +82,6 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
flags = skb_cb->flags;
ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
ath10k_htt_tx_dec_pending(htt);
- if (htt->num_pending_tx == 0)
- wake_up(&htt->empty_tx_wq);
spin_unlock_bh(&htt->tx_lock);
rcu_read_lock();
--
2.34.1
From: Felix Kuehling <[email protected]>
[ Upstream commit 726be40607264b180a2b336c81e1dcff941de618 ]
Add null-pointer check after the last svm_range_new call. This was
originally reported by Zhou Qingyang <[email protected]> based on a
static analyzer.
To avoid duplicating the unwinding code from svm_range_handle_overlap,
I merged the two functions into one.
Signed-off-by: Felix Kuehling <[email protected]>
Cc: Zhou Qingyang <[email protected]>
Reviewed-by: Philip Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 138 ++++++++++-----------------
1 file changed, 49 insertions(+), 89 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
index 5a674235ae41a..830809b694dd9 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
@@ -936,7 +936,7 @@ svm_range_split(struct svm_range *prange, uint64_t start, uint64_t last,
}
static int
-svm_range_split_tail(struct svm_range *prange, struct svm_range *new,
+svm_range_split_tail(struct svm_range *prange,
uint64_t new_last, struct list_head *insert_list)
{
struct svm_range *tail;
@@ -948,7 +948,7 @@ svm_range_split_tail(struct svm_range *prange, struct svm_range *new,
}
static int
-svm_range_split_head(struct svm_range *prange, struct svm_range *new,
+svm_range_split_head(struct svm_range *prange,
uint64_t new_start, struct list_head *insert_list)
{
struct svm_range *head;
@@ -1755,49 +1755,54 @@ static struct svm_range *svm_range_clone(struct svm_range *old)
}
/**
- * svm_range_handle_overlap - split overlap ranges
- * @svms: svm range list header
- * @new: range added with this attributes
- * @start: range added start address, in pages
- * @last: range last address, in pages
- * @update_list: output, the ranges attributes are updated. For set_attr, this
- * will do validation and map to GPUs. For unmap, this will be
- * removed and unmap from GPUs
- * @insert_list: output, the ranges will be inserted into svms, attributes are
- * not changes. For set_attr, this will add into svms.
- * @remove_list:output, the ranges will be removed from svms
- * @left: the remaining range after overlap, For set_attr, this will be added
- * as new range.
+ * svm_range_add - add svm range and handle overlap
+ * @p: the range add to this process svms
+ * @start: page size aligned
+ * @size: page size aligned
+ * @nattr: number of attributes
+ * @attrs: array of attributes
+ * @update_list: output, the ranges need validate and update GPU mapping
+ * @insert_list: output, the ranges need insert to svms
+ * @remove_list: output, the ranges are replaced and need remove from svms
*
- * Total have 5 overlap cases.
+ * Check if the virtual address range has overlap with any existing ranges,
+ * split partly overlapping ranges and add new ranges in the gaps. All changes
+ * should be applied to the range_list and interval tree transactionally. If
+ * any range split or allocation fails, the entire update fails. Therefore any
+ * existing overlapping svm_ranges are cloned and the original svm_ranges left
+ * unchanged.
*
- * This function handles overlap of an address interval with existing
- * struct svm_ranges for applying new attributes. This may require
- * splitting existing struct svm_ranges. All changes should be applied to
- * the range_list and interval tree transactionally. If any split operation
- * fails, the entire update fails. Therefore the existing overlapping
- * svm_ranges are cloned and the original svm_ranges left unchanged. If the
- * transaction succeeds, the modified clones are added and the originals
- * freed. Otherwise the clones are removed and the old svm_ranges remain.
+ * If the transaction succeeds, the caller can update and insert clones and
+ * new ranges, then free the originals.
*
- * Context: The caller must hold svms->lock
+ * Otherwise the caller can free the clones and new ranges, while the old
+ * svm_ranges remain unchanged.
+ *
+ * Context: Process context, caller must hold svms->lock
+ *
+ * Return:
+ * 0 - OK, otherwise error code
*/
static int
-svm_range_handle_overlap(struct svm_range_list *svms, struct svm_range *new,
- unsigned long start, unsigned long last,
- struct list_head *update_list,
- struct list_head *insert_list,
- struct list_head *remove_list,
- unsigned long *left)
+svm_range_add(struct kfd_process *p, uint64_t start, uint64_t size,
+ uint32_t nattr, struct kfd_ioctl_svm_attribute *attrs,
+ struct list_head *update_list, struct list_head *insert_list,
+ struct list_head *remove_list)
{
+ unsigned long last = start + size - 1UL;
+ struct svm_range_list *svms = &p->svms;
struct interval_tree_node *node;
+ struct svm_range new = {0};
struct svm_range *prange;
struct svm_range *tmp;
int r = 0;
+ pr_debug("svms 0x%p [0x%llx 0x%lx]\n", &p->svms, start, last);
+
INIT_LIST_HEAD(update_list);
INIT_LIST_HEAD(insert_list);
INIT_LIST_HEAD(remove_list);
+ svm_range_apply_attrs(p, &new, nattr, attrs);
node = interval_tree_iter_first(&svms->objects, start, last);
while (node) {
@@ -1825,14 +1830,14 @@ svm_range_handle_overlap(struct svm_range_list *svms, struct svm_range *new,
if (node->start < start) {
pr_debug("change old range start\n");
- r = svm_range_split_head(prange, new, start,
+ r = svm_range_split_head(prange, start,
insert_list);
if (r)
goto out;
}
if (node->last > last) {
pr_debug("change old range last\n");
- r = svm_range_split_tail(prange, new, last,
+ r = svm_range_split_tail(prange, last,
insert_list);
if (r)
goto out;
@@ -1844,7 +1849,7 @@ svm_range_handle_overlap(struct svm_range_list *svms, struct svm_range *new,
prange = old;
}
- if (!svm_range_is_same_attrs(prange, new))
+ if (!svm_range_is_same_attrs(prange, &new))
list_add(&prange->update_list, update_list);
/* insert a new node if needed */
@@ -1864,8 +1869,16 @@ svm_range_handle_overlap(struct svm_range_list *svms, struct svm_range *new,
start = next_start;
}
- if (left && start <= last)
- *left = last - start + 1;
+ /* add a final range at the end if needed */
+ if (start <= last) {
+ prange = svm_range_new(svms, start, last);
+ if (!prange) {
+ r = -ENOMEM;
+ goto out;
+ }
+ list_add(&prange->insert_list, insert_list);
+ list_add(&prange->update_list, update_list);
+ }
out:
if (r)
@@ -2693,59 +2706,6 @@ svm_range_is_valid(struct mm_struct *mm, uint64_t start, uint64_t size)
return true;
}
-/**
- * svm_range_add - add svm range and handle overlap
- * @p: the range add to this process svms
- * @start: page size aligned
- * @size: page size aligned
- * @nattr: number of attributes
- * @attrs: array of attributes
- * @update_list: output, the ranges need validate and update GPU mapping
- * @insert_list: output, the ranges need insert to svms
- * @remove_list: output, the ranges are replaced and need remove from svms
- *
- * Check if the virtual address range has overlap with the registered ranges,
- * split the overlapped range, copy and adjust pages address and vram nodes in
- * old and new ranges.
- *
- * Context: Process context, caller must hold svms->lock
- *
- * Return:
- * 0 - OK, otherwise error code
- */
-static int
-svm_range_add(struct kfd_process *p, uint64_t start, uint64_t size,
- uint32_t nattr, struct kfd_ioctl_svm_attribute *attrs,
- struct list_head *update_list, struct list_head *insert_list,
- struct list_head *remove_list)
-{
- uint64_t last = start + size - 1UL;
- struct svm_range_list *svms;
- struct svm_range new = {0};
- struct svm_range *prange;
- unsigned long left = 0;
- int r = 0;
-
- pr_debug("svms 0x%p [0x%llx 0x%llx]\n", &p->svms, start, last);
-
- svm_range_apply_attrs(p, &new, nattr, attrs);
-
- svms = &p->svms;
-
- r = svm_range_handle_overlap(svms, &new, start, last, update_list,
- insert_list, remove_list, &left);
- if (r)
- return r;
-
- if (left) {
- prange = svm_range_new(svms, last - left + 1, last);
- list_add(&prange->insert_list, insert_list);
- list_add(&prange->update_list, update_list);
- }
-
- return 0;
-}
-
/**
* svm_range_best_prefetch_location - decide the best prefetch location
* @prange: svm range structure
--
2.34.1
From: Paolo Abeni <[email protected]>
[ Upstream commit 2cbad989033bff0256675c38f96f5faab852af4b ]
The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.
The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.
Replace the WARN_ONCE with a less intrusive pr_warn_once().
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/filter.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/core/filter.c b/net/core/filter.c
index 1e43ab413b62e..f207e4782bd0e 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -8178,9 +8178,9 @@ void bpf_warn_invalid_xdp_action(u32 act)
{
const u32 act_max = XDP_REDIRECT;
- WARN_ONCE(1, "%s XDP return value %u, expect packet loss!\n",
- act > act_max ? "Illegal" : "Driver unsupported",
- act);
+ pr_warn_once("%s XDP return value %u, expect packet loss!\n",
+ act > act_max ? "Illegal" : "Driver unsupported",
+ act);
}
EXPORT_SYMBOL_GPL(bpf_warn_invalid_xdp_action);
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 521223d8b3ec078f670c7c35a1a04b1b2af07966 ]
The min and max frequency QoS requests in the cpufreq core are
initialized to whatever the current min and max frequency values are
at the init time, but if any of these values change later (for
example, cpuinfo.max_freq is updated by the driver), these initial
request values will be limiting the CPU frequency unnecessarily
unless they are changed by user space via sysfs.
To address this, initialize min_freq_req and max_freq_req to
FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE,
respectively, so they don't really limit anything until user
space updates them.
Reported-by: Srinivas Pandruvada <[email protected]>
Tested-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/cpufreq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index fcb44352623ee..eeac6d8092298 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1402,7 +1402,7 @@ static int cpufreq_online(unsigned int cpu)
ret = freq_qos_add_request(&policy->constraints,
policy->min_freq_req, FREQ_QOS_MIN,
- policy->min);
+ FREQ_QOS_MIN_DEFAULT_VALUE);
if (ret < 0) {
/*
* So we don't call freq_qos_remove_request() for an
@@ -1422,7 +1422,7 @@ static int cpufreq_online(unsigned int cpu)
ret = freq_qos_add_request(&policy->constraints,
policy->max_freq_req, FREQ_QOS_MAX,
- policy->max);
+ FREQ_QOS_MAX_DEFAULT_VALUE);
if (ret < 0) {
policy->max_freq_req = NULL;
goto out_destroy_policy;
--
2.34.1
From: Tetsuo Handa <[email protected]>
[ Upstream commit 8b3046abc99eefe11438090bcc4ec3a3994b55d0 ]
syzbot is reporting lockdep warning at ath9k_wmi_event_tasklet() followed
by kernel panic at get_htc_epid_queue() from ath9k_htc_tx_get_packet() from
ath9k_htc_txstatus() [1], for ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID)
depends on spin_lock_init() from ath9k_init_priv() being already completed.
Since ath9k_wmi_event_tasklet() is set by ath9k_init_wmi() from
ath9k_htc_probe_device(), it is possible that ath9k_wmi_event_tasklet() is
called via tasklet interrupt before spin_lock_init() from ath9k_init_priv()
from ath9k_init_device() from ath9k_htc_probe_device() is called.
Let's hold ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) no-op until
ath9k_tx_init() completes.
Link: https://syzkaller.appspot.com/bug?extid=31d54c60c5b254d6f75b [1]
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Tested-by: syzbot <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc.h | 1 +
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 5 +++++
drivers/net/wireless/ath/ath9k/wmi.c | 4 ++++
3 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 4f71e962279af..6b45e63fae4ba 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -306,6 +306,7 @@ struct ath9k_htc_tx {
DECLARE_BITMAP(tx_slot, MAX_TX_BUF_NUM);
struct timer_list cleanup_timer;
spinlock_t tx_lock;
+ bool initialized;
};
struct ath9k_htc_tx_ctl {
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index e7a21eaf3a68d..6a850a0bfa8ad 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -813,6 +813,11 @@ int ath9k_tx_init(struct ath9k_htc_priv *priv)
skb_queue_head_init(&priv->tx.data_vi_queue);
skb_queue_head_init(&priv->tx.data_vo_queue);
skb_queue_head_init(&priv->tx.tx_failed);
+
+ /* Allow ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) to operate. */
+ smp_wmb();
+ priv->tx.initialized = true;
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index fe29ad4b9023c..f315c54bd3ac0 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -169,6 +169,10 @@ void ath9k_wmi_event_tasklet(struct tasklet_struct *t)
&wmi->drv_priv->fatal_work);
break;
case WMI_TXSTATUS_EVENTID:
+ /* Check if ath9k_tx_init() completed. */
+ if (!data_race(priv->tx.initialized))
+ break;
+
spin_lock_bh(&priv->tx.tx_lock);
if (priv->tx.flags & ATH9K_HTC_OP_TX_DRAIN) {
spin_unlock_bh(&priv->tx.tx_lock);
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit a2ab06d7c4d6bfd0b545a768247a70463e977e27 ]
Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.
Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().
Link: https://lore.kernel.org/all/[email protected]/
Reported-by: [email protected]
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/m920x.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c
index 4bb5b82599a79..691e05833db19 100644
--- a/drivers/media/usb/dvb-usb/m920x.c
+++ b/drivers/media/usb/dvb-usb/m920x.c
@@ -274,6 +274,13 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int nu
/* Should check for ack here, if we knew how. */
}
if (msg[i].flags & I2C_M_RD) {
+ char *read = kmalloc(1, GFP_KERNEL);
+ if (!read) {
+ ret = -ENOMEM;
+ kfree(read);
+ goto unlock;
+ }
+
for (j = 0; j < msg[i].len; j++) {
/* Last byte of transaction?
* Send STOP, otherwise send ACK. */
@@ -281,9 +288,12 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int nu
if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
0x20 | stop,
- &msg[i].buf[j], 1)) != 0)
+ read, 1)) != 0)
goto unlock;
+ msg[i].buf[j] = read[0];
}
+
+ kfree(read);
} else {
for (j = 0; j < msg[i].len; j++) {
/* Last byte of transaction? Then send STOP. */
--
2.34.1
From: Xing Song <[email protected]>
[ Upstream commit dd28dea52ad9376d2b243a8981726646e1f60b1a ]
MAC80211 doesn't care any decryption error in 802.3 path, so received
frame will be dropped if HW tell us that the cipher configuration is not
matched as well as the header has been translated to 802.3. This case only
appears when IEEE80211_FCTL_PROTECTED is 0 and cipher suit is not none in
the corresponding HW entry.
The received frame is only reported to monitor interface if HW decryption
block tell us there is ICV error or CCMP/BIP/WPI MIC error. Note in this
case the reported frame is decrypted 802.11 frame and the payload may be
malformed due to mismatched key.
Signed-off-by: Xing Song <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7603/mac.c | 4 ++++
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 9 ++++++++-
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 9 ++++++++-
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 9 ++++++++-
4 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
index 3972c56136a20..65f1f2bb80835 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
@@ -525,6 +525,10 @@ mt7603_mac_fill_rx(struct mt7603_dev *dev, struct sk_buff *skb)
if (rxd2 & MT_RXD2_NORMAL_TKIP_MIC_ERR)
status->flag |= RX_FLAG_MMIC_ERROR;
+ /* ICV error or CCMP/BIP/WPI MIC error */
+ if (rxd2 & MT_RXD2_NORMAL_ICV_ERR)
+ status->flag |= RX_FLAG_ONLY_MONITOR;
+
if (FIELD_GET(MT_RXD2_NORMAL_SEC_MODE, rxd2) != 0 &&
!(rxd2 & (MT_RXD2_NORMAL_CLM | MT_RXD2_NORMAL_CM))) {
status->flag |= RX_FLAG_DECRYPTED;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 5455231f51881..f2704149834a0 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -286,9 +286,16 @@ static int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb)
if (rxd2 & MT_RXD2_NORMAL_AMSDU_ERR)
return -EINVAL;
+ hdr_trans = rxd1 & MT_RXD1_NORMAL_HDR_TRANS;
+ if (hdr_trans && (rxd2 & MT_RXD2_NORMAL_CM))
+ return -EINVAL;
+
+ /* ICV error or CCMP/BIP/WPI MIC error */
+ if (rxd2 & MT_RXD2_NORMAL_ICV_ERR)
+ status->flag |= RX_FLAG_ONLY_MONITOR;
+
unicast = (rxd1 & MT_RXD1_NORMAL_ADDR_TYPE) == MT_RXD1_NORMAL_U2M;
idx = FIELD_GET(MT_RXD2_NORMAL_WLAN_IDX, rxd2);
- hdr_trans = rxd1 & MT_RXD1_NORMAL_HDR_TRANS;
status->wcid = mt7615_rx_get_wcid(dev, idx, unicast);
if (status->wcid) {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index bbc996f86b5c3..ff613d7056119 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -349,9 +349,16 @@ mt7915_mac_fill_rx(struct mt7915_dev *dev, struct sk_buff *skb)
if (rxd2 & MT_RXD2_NORMAL_AMSDU_ERR)
return -EINVAL;
+ hdr_trans = rxd2 & MT_RXD2_NORMAL_HDR_TRANS;
+ if (hdr_trans && (rxd1 & MT_RXD1_NORMAL_CM))
+ return -EINVAL;
+
+ /* ICV error or CCMP/BIP/WPI MIC error */
+ if (rxd1 & MT_RXD1_NORMAL_ICV_ERR)
+ status->flag |= RX_FLAG_ONLY_MONITOR;
+
unicast = FIELD_GET(MT_RXD3_NORMAL_ADDR_TYPE, rxd3) == MT_RXD3_NORMAL_U2M;
idx = FIELD_GET(MT_RXD1_NORMAL_WLAN_IDX, rxd1);
- hdr_trans = rxd2 & MT_RXD2_NORMAL_HDR_TRANS;
status->wcid = mt7915_rx_get_wcid(dev, idx, unicast);
if (status->wcid) {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 8a16f3f4d5253..04a288029c98e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -383,10 +383,17 @@ int mt7921_mac_fill_rx(struct mt7921_dev *dev, struct sk_buff *skb)
if (rxd2 & MT_RXD2_NORMAL_AMSDU_ERR)
return -EINVAL;
+ hdr_trans = rxd2 & MT_RXD2_NORMAL_HDR_TRANS;
+ if (hdr_trans && (rxd1 & MT_RXD1_NORMAL_CM))
+ return -EINVAL;
+
+ /* ICV error or CCMP/BIP/WPI MIC error */
+ if (rxd1 & MT_RXD1_NORMAL_ICV_ERR)
+ status->flag |= RX_FLAG_ONLY_MONITOR;
+
chfreq = FIELD_GET(MT_RXD3_NORMAL_CH_FREQ, rxd3);
unicast = FIELD_GET(MT_RXD3_NORMAL_ADDR_TYPE, rxd3) == MT_RXD3_NORMAL_U2M;
idx = FIELD_GET(MT_RXD1_NORMAL_WLAN_IDX, rxd1);
- hdr_trans = rxd2 & MT_RXD2_NORMAL_HDR_TRANS;
status->wcid = mt7921_rx_get_wcid(dev, idx, unicast);
if (status->wcid) {
--
2.34.1
From: Danielle Ratson <[email protected]>
[ Upstream commit c1020d3cf4752f61a6a413f632ea2ce2370e150d ]
On an arm64 platform with the Spectrum ASIC, after loading and executing
a new kernel via kexec, the following trace [1] is observed. This seems
to be caused by the fact that the device is not properly shutdown before
executing the new kernel.
Fix this by implementing a shutdown method which mirrors the remove
method, as recommended by the kexec maintainer [2][3].
[1]
BUG: Bad page state in process devlink pfn:22f73d
page:fffffe00089dcf40 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x2ffff00000000000()
raw: 2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000
raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
Modules linked in:
CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44
Hardware name: Marvell Armada 7040 TX4810M (DT)
Call trace:
dump_backtrace+0x0/0x1d0
show_stack+0x1c/0x28
dump_stack+0xbc/0x118
bad_page+0xcc/0xf8
check_free_page_bad+0x80/0x88
__free_pages_ok+0x3f8/0x418
__free_pages+0x38/0x60
kmem_freepages+0x200/0x2a8
slab_destroy+0x28/0x68
slabs_destroy+0x60/0x90
___cache_free+0x1b4/0x358
kfree+0xc0/0x1d0
skb_free_head+0x2c/0x38
skb_release_data+0x110/0x1a0
skb_release_all+0x2c/0x38
consume_skb+0x38/0x130
__dev_kfree_skb_any+0x44/0x50
mlxsw_pci_rdq_fini+0x8c/0xb0
mlxsw_pci_queue_fini.isra.0+0x28/0x58
mlxsw_pci_queue_group_fini+0x58/0x88
mlxsw_pci_aqs_fini+0x2c/0x60
mlxsw_pci_fini+0x34/0x50
mlxsw_core_bus_device_unregister+0x104/0x1d0
mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48
devlink_reload+0x44/0x158
devlink_nl_cmd_reload+0x270/0x290
genl_rcv_msg+0x188/0x2f0
netlink_rcv_skb+0x5c/0x118
genl_rcv+0x3c/0x50
netlink_unicast+0x1bc/0x278
netlink_sendmsg+0x194/0x390
__sys_sendto+0xe0/0x158
__arm64_sys_sendto+0x2c/0x38
el0_svc_common.constprop.0+0x70/0x168
do_el0_svc+0x28/0x88
el0_sync_handler+0x88/0x190
el0_sync+0x140/0x180
[2]
https://www.mail-archive.com/[email protected]/msg1195432.html
[3]
https://patchwork.kernel.org/project/linux-scsi/patch/[email protected]/#20116693
Cc: Eric Biederman <[email protected]>
Signed-off-by: Danielle Ratson <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/pci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index fcace73eae40f..01c3235ab2bdf 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1973,6 +1973,7 @@ int mlxsw_pci_driver_register(struct pci_driver *pci_driver)
{
pci_driver->probe = mlxsw_pci_probe;
pci_driver->remove = mlxsw_pci_remove;
+ pci_driver->shutdown = mlxsw_pci_remove;
return pci_register_driver(pci_driver);
}
EXPORT_SYMBOL(mlxsw_pci_driver_register);
--
2.34.1
From: Neal Liu <[email protected]>
[ Upstream commit 554abfe2eadec97d12c71d4a69da1518478f69eb ]
Enable ast2600 uhci quirks.
Signed-off-by: Neal Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/uhci-platform.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 70dbd95c3f063..be9e9db7cad10 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -113,7 +113,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
num_ports);
}
if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
- of_device_is_compatible(np, "aspeed,ast2500-uhci")) {
+ of_device_is_compatible(np, "aspeed,ast2500-uhci") ||
+ of_device_is_compatible(np, "aspeed,ast2600-uhci")) {
uhci->is_aspeed = 1;
dev_info(&pdev->dev,
"Enabled Aspeed implementation workarounds\n");
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]
Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.
4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.
BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
__kasan_report.cold+0x37/0x7c
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
kasan_report+0xe/0x20
check_memory_region+0x15a/0x1d0
memcpy+0x20/0x50
ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
? _raw_spin_lock_irqsave+0x7b/0xd0
? _raw_spin_trylock_bh+0x120/0x120
? __usb_unanchor_urb+0x12f/0x210
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __hrtimer_run_queues+0x316/0x740
? __usb_hcd_giveback_urb+0x380/0x380
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
irq_exit+0x114/0x140
smp_apic_timer_interrupt+0xde/0x380
apic_timer_interrupt+0xf/0x20
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 860da13bfb6ac..f06eec99de688 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -590,6 +590,13 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
return;
}
+ if (pkt_len > 2 * MAX_RX_BUF_SIZE) {
+ dev_err(&hif_dev->udev->dev,
+ "ath9k_htc: invalid pkt_len (%x)\n", pkt_len);
+ RX_STAT_INC(skb_dropped);
+ return;
+ }
+
pad_len = 4 - (pkt_len & 0x3);
if (pad_len == 4)
pad_len = 0;
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 1cdfe9e346b4c5509ffe19ccde880fd259d9f7a3 ]
ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687
If original_count is 0 in acpi_ut_update_ref_count (),
acpi_ut_delete_internal_obj () is invoked for the target object, which is
incorrect, because that object has been deleted once already and the
memory allocated to store it may have been reclaimed and allocated
for a different purpose by the host OS. Moreover, a confusing debug
message following the "Reference Count is already zero, cannot
decrement" warning is printed in that case.
To fix this issue, make acpi_ut_update_ref_count () return after finding
that original_count is 0 and printing the above warning.
Link: https://github.com/acpica/acpica/commit/c11af67d
Link: https://github.com/acpica/acpica/pull/652
Reported-by: Mark Asselstine <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/utdelete.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index e5ba9795ec696..8d7736d2d2699 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -422,6 +422,7 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
ACPI_WARNING((AE_INFO,
"Obj %p, Reference Count is already zero, cannot decrement\n",
object));
+ return;
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_ALLOCATIONS,
--
2.34.1
From: Joe Thornber <[email protected]>
[ Upstream commit 85bca3c05b6cca31625437eedf2060e846c4bbad ]
Corrupt metadata could trigger an out of bounds write.
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/persistent-data/dm-btree.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/md/persistent-data/dm-btree.c b/drivers/md/persistent-data/dm-btree.c
index 0703ca7a7d9a4..5ce64e93aae74 100644
--- a/drivers/md/persistent-data/dm-btree.c
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -81,14 +81,16 @@ void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
}
static int insert_at(size_t value_size, struct btree_node *node, unsigned index,
- uint64_t key, void *value)
- __dm_written_to_disk(value)
+ uint64_t key, void *value)
+ __dm_written_to_disk(value)
{
uint32_t nr_entries = le32_to_cpu(node->header.nr_entries);
+ uint32_t max_entries = le32_to_cpu(node->header.max_entries);
__le64 key_le = cpu_to_le64(key);
if (index > nr_entries ||
- index >= le32_to_cpu(node->header.max_entries)) {
+ index >= max_entries ||
+ nr_entries >= max_entries) {
DMERR("too many entries in btree node for insert");
__dm_unbless_for_disk(value);
return -ENOMEM;
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit bdfd6ab8fdccd8b138837efff66f4a1911496378 ]
If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.
I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.
Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpiolib-acpi.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 47712b6903b51..d040c72fea582 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1059,10 +1059,17 @@ int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int ind
irq_flags = acpi_dev_get_irq_type(info.triggering,
info.polarity);
- /* Set type if specified and different than the current one */
- if (irq_flags != IRQ_TYPE_NONE &&
- irq_flags != irq_get_trigger_type(irq))
- irq_set_irq_type(irq, irq_flags);
+ /*
+ * If the IRQ is not already in use then set type
+ * if specified and different than the current one.
+ */
+ if (can_request_irq(irq, irq_flags)) {
+ if (irq_flags != IRQ_TYPE_NONE &&
+ irq_flags != irq_get_trigger_type(irq))
+ irq_set_irq_type(irq, irq_flags);
+ } else {
+ dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
+ }
return irq;
}
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 3af86b046933ba513d08399dba0d4d8b50d607d0 ]
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/common/saa7146/saa7146_fops.c | 2 +-
drivers/media/pci/saa7146/hexium_gemini.c | 7 ++++++-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/media/common/saa7146/saa7146_fops.c b/drivers/media/common/saa7146/saa7146_fops.c
index baf5772c52a96..be32159777142 100644
--- a/drivers/media/common/saa7146/saa7146_fops.c
+++ b/drivers/media/common/saa7146/saa7146_fops.c
@@ -521,7 +521,7 @@ int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
ERR("out of memory. aborting.\n");
kfree(vv);
v4l2_ctrl_handler_free(hdl);
- return -1;
+ return -ENOMEM;
}
saa7146_video_uops.init(dev,vv);
diff --git a/drivers/media/pci/saa7146/hexium_gemini.c b/drivers/media/pci/saa7146/hexium_gemini.c
index 2214c74bbbf15..3947701cd6c7e 100644
--- a/drivers/media/pci/saa7146/hexium_gemini.c
+++ b/drivers/media/pci/saa7146/hexium_gemini.c
@@ -284,7 +284,12 @@ static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d
hexium_set_input(hexium, 0);
hexium->cur_input = 0;
- saa7146_vv_init(dev, &vv_data);
+ ret = saa7146_vv_init(dev, &vv_data);
+ if (ret) {
+ i2c_del_adapter(&hexium->i2c_adapter);
+ kfree(hexium);
+ return ret;
+ }
vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
--
2.34.1
From: Alistair Francis <[email protected]>
[ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ]
Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <[email protected]>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-input.c | 6 ++++++
include/linux/hid.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index c3bd7ba9a5ca0..3d33c0c06cbb3 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1332,6 +1332,12 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
input = field->hidinput->input;
+ if (usage->type == EV_ABS &&
+ (((*quirks & HID_QUIRK_X_INVERT) && usage->code == ABS_X) ||
+ ((*quirks & HID_QUIRK_Y_INVERT) && usage->code == ABS_Y))) {
+ value = field->logical_maximum - value;
+ }
+
if (usage->hat_min < usage->hat_max || usage->hat_dir) {
int hat_dir = usage->hat_dir;
if (!hat_dir)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index f453be385bd47..26742ca14609a 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -349,6 +349,8 @@ struct hid_item {
/* BIT(9) reserved for backward compatibility, was NO_INIT_INPUT_REPORTS */
#define HID_QUIRK_ALWAYS_POLL BIT(10)
#define HID_QUIRK_INPUT_PER_APP BIT(11)
+#define HID_QUIRK_X_INVERT BIT(12)
+#define HID_QUIRK_Y_INVERT BIT(13)
#define HID_QUIRK_SKIP_OUTPUT_REPORTS BIT(16)
#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID BIT(17)
#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP BIT(18)
--
2.34.1
From: Thierry Reding <[email protected]>
[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ]
The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index e94f8add1a400..062e87e893316 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1079,7 +1079,7 @@
ccplex@e000000 {
compatible = "nvidia,tegra186-ccplex-cluster";
- reg = <0x0 0x0e000000 0x0 0x3fffff>;
+ reg = <0x0 0x0e000000 0x0 0x400000>;
nvidia,bpmp = <&bpmp>;
};
--
2.34.1
From: Po-Hao Huang <[email protected]>
[ Upstream commit c1afb26727d9e507d3e17a9890e7aaf7fc85cd55 ]
These settings enables mac to detect and recover when rx fifo
circuit deadlock occurs. Previous version missed this, so we fix it.
Signed-off-by: Po-Hao Huang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/main.c | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8821c.h | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8822b.c | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 6bb55e663fc36..69512856bb462 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1859,7 +1859,7 @@ int rtw_core_init(struct rtw_dev *rtwdev)
/* default rx filter setting */
rtwdev->hal.rcr = BIT_APP_FCS | BIT_APP_MIC | BIT_APP_ICV |
- BIT_HTC_LOC_CTRL | BIT_APP_PHYSTS |
+ BIT_PKTCTL_DLEN | BIT_HTC_LOC_CTRL | BIT_APP_PHYSTS |
BIT_AB | BIT_AM | BIT_APM;
ret = rtw_load_firmware(rtwdev, RTW_NORMAL_FW);
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.h b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
index 112faa60f653e..d9fbddd7b0f35 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
@@ -131,7 +131,7 @@ _rtw_write32s_mask(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 data)
#define WLAN_TX_FUNC_CFG2 0x30
#define WLAN_MAC_OPT_NORM_FUNC1 0x98
#define WLAN_MAC_OPT_LB_FUNC1 0x80
-#define WLAN_MAC_OPT_FUNC2 0x30810041
+#define WLAN_MAC_OPT_FUNC2 0xb0810041
#define WLAN_SIFS_CFG (WLAN_SIFS_CCK_CONT_TX | \
(WLAN_SIFS_OFDM_CONT_TX << BIT_SHIFT_SIFS_OFDM_CTX) | \
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index f1789155e9016..247f26e3e8192 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -204,7 +204,7 @@ static void rtw8822b_phy_set_param(struct rtw_dev *rtwdev)
#define WLAN_TX_FUNC_CFG2 0x30
#define WLAN_MAC_OPT_NORM_FUNC1 0x98
#define WLAN_MAC_OPT_LB_FUNC1 0x80
-#define WLAN_MAC_OPT_FUNC2 0x30810041
+#define WLAN_MAC_OPT_FUNC2 0xb0810041
#define WLAN_SIFS_CFG (WLAN_SIFS_CCK_CONT_TX | \
(WLAN_SIFS_OFDM_CONT_TX << BIT_SHIFT_SIFS_OFDM_CTX) | \
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index f3ad079967a68..bc87e3cb9cdce 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -1962,7 +1962,7 @@ static void rtw8822c_phy_set_param(struct rtw_dev *rtwdev)
#define WLAN_TX_FUNC_CFG2 0x30
#define WLAN_MAC_OPT_NORM_FUNC1 0x98
#define WLAN_MAC_OPT_LB_FUNC1 0x80
-#define WLAN_MAC_OPT_FUNC2 0x30810041
+#define WLAN_MAC_OPT_FUNC2 0xb0810041
#define WLAN_MAC_INT_MIG_CFG 0x33330000
#define WLAN_SIFS_CFG (WLAN_SIFS_CCK_CONT_TX | \
--
2.34.1
From: Dario Binacchi <[email protected]>
[ Upstream commit 01bb4dccd92b4dc21f6af3312e5696924e371111 ]
This is a preparation patch for the upcoming support to change the
rx-rtr capability via the ethtool API.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Dario Binacchi <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/flexcan.c | 54 +++++++++++++++++++--------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 7734229aa0788..3178557e40208 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -365,7 +365,7 @@ struct flexcan_priv {
struct clk *clk_ipg;
struct clk *clk_per;
- const struct flexcan_devtype_data *devtype_data;
+ struct flexcan_devtype_data devtype_data;
struct regulator *reg_xceiver;
struct flexcan_stop_mode stm;
@@ -596,7 +596,7 @@ static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv)
priv->write(reg_mcr, ®s->mcr);
/* enable stop request */
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
ret = flexcan_stop_mode_enable_scfw(priv, true);
if (ret < 0)
return ret;
@@ -615,7 +615,7 @@ static inline int flexcan_exit_stop_mode(struct flexcan_priv *priv)
int ret;
/* remove stop request */
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
ret = flexcan_stop_mode_enable_scfw(priv, false);
if (ret < 0)
return ret;
@@ -1018,7 +1018,7 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
mb = flexcan_get_mb(priv, n);
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
u32 code;
do {
@@ -1083,7 +1083,7 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
}
mark_as_read:
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
flexcan_write64(priv, FLEXCAN_IFLAG_MB(n), ®s->iflag1);
else
priv->write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->iflag1);
@@ -1109,7 +1109,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
enum can_state last_state = priv->can.state;
/* reception interrupt */
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
u64 reg_iflag_rx;
int ret;
@@ -1169,7 +1169,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
/* state change interrupt or broken error state quirk fix is enabled */
if ((reg_esr & FLEXCAN_ESR_ERR_STATE) ||
- (priv->devtype_data->quirks & (FLEXCAN_QUIRK_BROKEN_WERR_STATE |
+ (priv->devtype_data.quirks & (FLEXCAN_QUIRK_BROKEN_WERR_STATE |
FLEXCAN_QUIRK_BROKEN_PERR_STATE)))
flexcan_irq_state(dev, reg_esr);
@@ -1191,11 +1191,11 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
* (1): enabled if FLEXCAN_QUIRK_BROKEN_WERR_STATE is enabled
*/
if ((last_state != priv->can.state) &&
- (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_PERR_STATE) &&
+ (priv->devtype_data.quirks & FLEXCAN_QUIRK_BROKEN_PERR_STATE) &&
!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)) {
switch (priv->can.state) {
case CAN_STATE_ERROR_ACTIVE:
- if (priv->devtype_data->quirks &
+ if (priv->devtype_data.quirks &
FLEXCAN_QUIRK_BROKEN_WERR_STATE)
flexcan_error_irq_enable(priv);
else
@@ -1423,13 +1423,13 @@ static int flexcan_rx_offload_setup(struct net_device *dev)
else
priv->mb_size = sizeof(struct flexcan_mb) + CAN_MAX_DLEN;
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_MB_16)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_MB_16)
priv->mb_count = 16;
else
priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
(sizeof(priv->regs->mb[1]) / priv->mb_size);
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
priv->tx_mb_reserved =
flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP);
else
@@ -1441,7 +1441,7 @@ static int flexcan_rx_offload_setup(struct net_device *dev)
priv->offload.mailbox_read = flexcan_mailbox_read;
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
priv->offload.mb_first = FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST;
priv->offload.mb_last = priv->mb_count - 2;
@@ -1506,7 +1506,7 @@ static int flexcan_chip_start(struct net_device *dev)
if (err)
goto out_chip_disable;
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_ECC)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SUPPORT_ECC)
flexcan_ram_init(dev);
flexcan_set_bittiming(dev);
@@ -1535,7 +1535,7 @@ static int flexcan_chip_start(struct net_device *dev)
* - disable for timestamp mode
* - enable for FIFO mode
*/
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
reg_mcr &= ~FLEXCAN_MCR_FEN;
else
reg_mcr |= FLEXCAN_MCR_FEN;
@@ -1586,7 +1586,7 @@ static int flexcan_chip_start(struct net_device *dev)
* on most Flexcan cores, too. Otherwise we don't get
* any error warning or passive interrupts.
*/
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_WERR_STATE ||
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_BROKEN_WERR_STATE ||
priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
else
@@ -1599,7 +1599,7 @@ static int flexcan_chip_start(struct net_device *dev)
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
priv->write(reg_ctrl, ®s->ctrl);
- if ((priv->devtype_data->quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
+ if ((priv->devtype_data.quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
reg_ctrl2 = priv->read(®s->ctrl2);
reg_ctrl2 |= FLEXCAN_CTRL2_EACEN | FLEXCAN_CTRL2_RRS;
priv->write(reg_ctrl2, ®s->ctrl2);
@@ -1631,7 +1631,7 @@ static int flexcan_chip_start(struct net_device *dev)
priv->write(reg_fdctrl, ®s->fdctrl);
}
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) {
mb = flexcan_get_mb(priv, i);
priv->write(FLEXCAN_MB_CODE_RX_EMPTY,
@@ -1659,7 +1659,7 @@ static int flexcan_chip_start(struct net_device *dev)
priv->write(0x0, ®s->rx14mask);
priv->write(0x0, ®s->rx15mask);
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_RXFG)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_DISABLE_RXFG)
priv->write(0x0, ®s->rxfgmask);
/* clear acceptance filters */
@@ -1673,7 +1673,7 @@ static int flexcan_chip_start(struct net_device *dev)
* This also works around errata e5295 which generates false
* positive memory errors and put the device in freeze mode.
*/
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_MECR) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_DISABLE_MECR) {
/* Follow the protocol as described in "Detection
* and Correction of Memory Errors" to write to
* MECR register (step 1 - 5)
@@ -1799,7 +1799,7 @@ static int flexcan_open(struct net_device *dev)
if (err)
goto out_can_rx_offload_disable;
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
err = request_irq(priv->irq_boff,
flexcan_irq, IRQF_SHARED, dev->name, dev);
if (err)
@@ -1845,7 +1845,7 @@ static int flexcan_close(struct net_device *dev)
netif_stop_queue(dev);
flexcan_chip_interrupts_disable(dev);
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
free_irq(priv->irq_err, dev);
free_irq(priv->irq_boff, dev);
}
@@ -2051,9 +2051,9 @@ static int flexcan_setup_stop_mode(struct platform_device *pdev)
priv = netdev_priv(dev);
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW)
ret = flexcan_setup_stop_mode_scfw(pdev);
- else if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR)
+ else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR)
ret = flexcan_setup_stop_mode_gpr(pdev);
else
/* return 0 directly if doesn't support stop mode feature */
@@ -2181,9 +2181,10 @@ static int flexcan_probe(struct platform_device *pdev)
dev->flags |= IFF_ECHO;
priv = netdev_priv(dev);
+ priv->devtype_data = *devtype_data;
if (of_property_read_bool(pdev->dev.of_node, "big-endian") ||
- devtype_data->quirks & FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN) {
+ priv->devtype_data.quirks & FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN) {
priv->read = flexcan_read_be;
priv->write = flexcan_write_be;
} else {
@@ -2202,10 +2203,9 @@ static int flexcan_probe(struct platform_device *pdev)
priv->clk_ipg = clk_ipg;
priv->clk_per = clk_per;
priv->clk_src = clk_src;
- priv->devtype_data = devtype_data;
priv->reg_xceiver = reg_xceiver;
- if (devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
priv->irq_boff = platform_get_irq(pdev, 1);
if (priv->irq_boff <= 0) {
err = -ENODEV;
@@ -2218,7 +2218,7 @@ static int flexcan_probe(struct platform_device *pdev)
}
}
- if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_FD) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SUPPORT_FD) {
priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD |
CAN_CTRLMODE_FD_NON_ISO;
priv->can.bittiming_const = &flexcan_fd_bittiming_const;
--
2.34.1
From: Joakim Tjernlund <[email protected]>
[ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ]
Current I2C reset procedure is broken in two ways:
1) It only generate 1 START instead of 9 STARTs and STOP.
2) It leaves the bus Busy so every I2C xfer after the first
fixup calls the reset routine again, for every xfer there after.
This fixes both errors.
Signed-off-by: Joakim Tjernlund <[email protected]>
Acked-by: Scott Wood <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-mpc.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index db26cc36e13fe..6c698c10d3cdb 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -119,23 +119,30 @@ static inline void writeccr(struct mpc_i2c *i2c, u32 x)
/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
* the bus, because it wants to send ACK.
* Following sequence of enabling/disabling and sending start/stop generates
- * the 9 pulses, so it's all OK.
+ * the 9 pulses, each with a START then ending with STOP, so it's all OK.
*/
static void mpc_i2c_fixup(struct mpc_i2c *i2c)
{
int k;
- u32 delay_val = 1000000 / i2c->real_clk + 1;
-
- if (delay_val < 2)
- delay_val = 2;
+ unsigned long flags;
for (k = 9; k; k--) {
writeccr(i2c, 0);
- writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+ writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */
+ writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */
+ readb(i2c->base + MPC_I2C_DR); /* init xfer */
+ udelay(15); /* let it hit the bus */
+ local_irq_save(flags); /* should not be delayed further */
+ writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */
readb(i2c->base + MPC_I2C_DR);
- writeccr(i2c, CCR_MEN);
- udelay(delay_val << 1);
+ if (k != 1)
+ udelay(5);
+ local_irq_restore(flags);
}
+ writeccr(i2c, CCR_MEN); /* Initiate STOP */
+ readb(i2c->base + MPC_I2C_DR);
+ udelay(15); /* Let STOP propagate */
+ writeccr(i2c, 0);
}
static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
--
2.34.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit 5dad4ba68a2483fc80d70b9dc90bbe16e1f27263 ]
It is possible for all CPUs to miss the pending cpumask becoming clear,
and then nobody resetting it, which will cause the lockup detector to
stop working. It will eventually expire, but watchdog_smp_panic will
avoid doing anything if the pending mask is clear and it will never be
reset.
Order the cpumask clear vs the subsequent test to close this race.
Add an extra check for an empty pending mask when the watchdog fires and
finds its bit still clear, to try to catch any other possible races or
bugs here and keep the watchdog working. The extra test in
arch_touch_nmi_watchdog is required to prevent the new warning from
firing off.
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Laurent Dufour <[email protected]>
Debugged-by: Laurent Dufour <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/watchdog.c | 41 +++++++++++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index 3fa6d240bade2..ad94a2c6b7337 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -135,6 +135,10 @@ static void set_cpumask_stuck(const struct cpumask *cpumask, u64 tb)
{
cpumask_or(&wd_smp_cpus_stuck, &wd_smp_cpus_stuck, cpumask);
cpumask_andnot(&wd_smp_cpus_pending, &wd_smp_cpus_pending, cpumask);
+ /*
+ * See wd_smp_clear_cpu_pending()
+ */
+ smp_mb();
if (cpumask_empty(&wd_smp_cpus_pending)) {
wd_smp_last_reset_tb = tb;
cpumask_andnot(&wd_smp_cpus_pending,
@@ -221,13 +225,44 @@ static void wd_smp_clear_cpu_pending(int cpu, u64 tb)
cpumask_clear_cpu(cpu, &wd_smp_cpus_stuck);
wd_smp_unlock(&flags);
+ } else {
+ /*
+ * The last CPU to clear pending should have reset the
+ * watchdog so we generally should not find it empty
+ * here if our CPU was clear. However it could happen
+ * due to a rare race with another CPU taking the
+ * last CPU out of the mask concurrently.
+ *
+ * We can't add a warning for it. But just in case
+ * there is a problem with the watchdog that is causing
+ * the mask to not be reset, try to kick it along here.
+ */
+ if (unlikely(cpumask_empty(&wd_smp_cpus_pending)))
+ goto none_pending;
}
return;
}
+
cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
+
+ /*
+ * Order the store to clear pending with the load(s) to check all
+ * words in the pending mask to check they are all empty. This orders
+ * with the same barrier on another CPU. This prevents two CPUs
+ * clearing the last 2 pending bits, but neither seeing the other's
+ * store when checking if the mask is empty, and missing an empty
+ * mask, which ends with a false positive.
+ */
+ smp_mb();
if (cpumask_empty(&wd_smp_cpus_pending)) {
unsigned long flags;
+none_pending:
+ /*
+ * Double check under lock because more than one CPU could see
+ * a clear mask with the lockless check after clearing their
+ * pending bits.
+ */
wd_smp_lock(&flags);
if (cpumask_empty(&wd_smp_cpus_pending)) {
wd_smp_last_reset_tb = tb;
@@ -318,8 +353,12 @@ void arch_touch_nmi_watchdog(void)
{
unsigned long ticks = tb_ticks_per_usec * wd_timer_period_ms * 1000;
int cpu = smp_processor_id();
- u64 tb = get_tb();
+ u64 tb;
+ if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
+ return;
+
+ tb = get_tb();
if (tb - per_cpu(wd_timer_tb, cpu) >= ticks) {
per_cpu(wd_timer_tb, cpu) = tb;
wd_smp_clear_cpu_pending(cpu, tb);
--
2.34.1
From: Tzung-Bi Shih <[email protected]>
[ Upstream commit 4e28491a7a198c668437f2be8a91a76aa52f20eb ]
The of_parse_phandle() document:
>>> Use of_node_put() on it when done.
The driver didn't call of_node_put(). Fixes the leak.
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c b/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
index a606133951b70..24a5d0adec1ba 100644
--- a/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
+++ b/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
@@ -1172,7 +1172,11 @@ static int mt8192_mt6359_dev_probe(struct platform_device *pdev)
return ret;
}
- return devm_snd_soc_register_card(&pdev->dev, card);
+ ret = devm_snd_soc_register_card(&pdev->dev, card);
+
+ of_node_put(platform_node);
+ of_node_put(hdmi_codec);
+ return ret;
}
#ifdef CONFIG_OF
--
2.34.1
From: Antoine Tenart <[email protected]>
[ Upstream commit d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ]
When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/net-sysfs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index dfa5ecff7f738..a4ae652633844 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1820,6 +1820,9 @@ static void remove_queue_kobjects(struct net_device *dev)
net_rx_queue_update_kobjects(dev, real_rx, 0);
netdev_queue_update_kobjects(dev, real_tx, 0);
+
+ dev->real_num_rx_queues = 0;
+ dev->real_num_tx_queues = 0;
#ifdef CONFIG_SYSFS
kset_unregister(dev->queues_kset);
#endif
--
2.34.1
From: AngeloGioacchino Del Regno <[email protected]>
[ Upstream commit ffaea6ebfe9ce06ebb3a54811a47688f2b0893cd ]
Replace all instances of open-coded while loops for polling registers
with calls to readl_poll_timeout() and, while at it, also fix some
possible infinite loop instances.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/mtk-sd.c | 64 ++++++++++++++++++++++++---------------
1 file changed, 39 insertions(+), 25 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 9e6dab7e34242..1ac92015992ed 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -628,12 +628,11 @@ static void msdc_reset_hw(struct msdc_host *host)
u32 val;
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
- while (readl(host->base + MSDC_CFG) & MSDC_CFG_RST)
- cpu_relax();
+ readl_poll_timeout(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
- while (readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_CLR)
- cpu_relax();
+ readl_poll_timeout(host->base + MSDC_FIFOCS, val,
+ !(val & MSDC_FIFOCS_CLR), 0, 0);
val = readl(host->base + MSDC_INT);
writel(val, host->base + MSDC_INT);
@@ -806,8 +805,9 @@ static void msdc_gate_clock(struct msdc_host *host)
clk_disable_unprepare(host->h_clk);
}
-static void msdc_ungate_clock(struct msdc_host *host)
+static int msdc_ungate_clock(struct msdc_host *host)
{
+ u32 val;
int ret;
clk_prepare_enable(host->h_clk);
@@ -817,11 +817,11 @@ static void msdc_ungate_clock(struct msdc_host *host)
ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks);
if (ret) {
dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
- return;
+ return ret;
}
- while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
- cpu_relax();
+ return readl_poll_timeout(host->base + MSDC_CFG, val,
+ (val & MSDC_CFG_CKSTB), 1, 20000);
}
static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
@@ -832,6 +832,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
u32 div;
u32 sclk;
u32 tune_reg = host->dev_comp->pad_tune_reg;
+ u32 val;
if (!hz) {
dev_dbg(host->dev, "set mclk to 0\n");
@@ -912,8 +913,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
else
clk_prepare_enable(clk_get_parent(host->src_clk));
- while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
- cpu_relax();
+ readl_poll_timeout(host->base + MSDC_CFG, val, (val & MSDC_CFG_CKSTB), 0, 0);
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
mmc->actual_clock = sclk;
host->mclk = hz;
@@ -1223,13 +1223,13 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
static inline bool msdc_cmd_is_ready(struct msdc_host *host,
struct mmc_request *mrq, struct mmc_command *cmd)
{
- /* The max busy time we can endure is 20ms */
- unsigned long tmo = jiffies + msecs_to_jiffies(20);
+ u32 val;
+ int ret;
- while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
- time_before(jiffies, tmo))
- cpu_relax();
- if (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) {
+ /* The max busy time we can endure is 20ms */
+ ret = readl_poll_timeout_atomic(host->base + SDC_STS, val,
+ !(val & SDC_STS_CMDBUSY), 1, 20000);
+ if (ret) {
dev_err(host->dev, "CMD bus busy detected\n");
host->error |= REQ_CMD_BUSY;
msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
@@ -1237,12 +1237,10 @@ static inline bool msdc_cmd_is_ready(struct msdc_host *host,
}
if (mmc_resp_type(cmd) == MMC_RSP_R1B || cmd->data) {
- tmo = jiffies + msecs_to_jiffies(20);
/* R1B or with data, should check SDCBUSY */
- while ((readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) &&
- time_before(jiffies, tmo))
- cpu_relax();
- if (readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) {
+ ret = readl_poll_timeout_atomic(host->base + SDC_STS, val,
+ !(val & SDC_STS_SDCBUSY), 1, 20000);
+ if (ret) {
dev_err(host->dev, "Controller busy detected\n");
host->error |= REQ_CMD_BUSY;
msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
@@ -1367,6 +1365,8 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
(MSDC_INT_XFER_COMPL | MSDC_INT_DATCRCERR | MSDC_INT_DATTMO
| MSDC_INT_DMA_BDCSERR | MSDC_INT_DMA_GPDCSERR
| MSDC_INT_DMA_PROTECT);
+ u32 val;
+ int ret;
spin_lock_irqsave(&host->lock, flags);
done = !host->data;
@@ -1383,8 +1383,14 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
readl(host->base + MSDC_DMA_CFG));
sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP,
1);
- while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
- cpu_relax();
+
+ ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CFG, val,
+ !(val & MSDC_DMA_CFG_STS), 1, 20000);
+ if (ret) {
+ dev_dbg(host->dev, "DMA stop timed out\n");
+ return false;
+ }
+
sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask);
dev_dbg(host->dev, "DMA stop\n");
@@ -2598,7 +2604,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
spin_lock_init(&host->lock);
platform_set_drvdata(pdev, mmc);
- msdc_ungate_clock(host);
+ ret = msdc_ungate_clock(host);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot ungate clocks!\n");
+ goto release_mem;
+ }
msdc_init_hw(host);
if (mmc->caps2 & MMC_CAP2_CQE) {
@@ -2757,8 +2767,12 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct msdc_host *host = mmc_priv(mmc);
+ int ret;
+
+ ret = msdc_ungate_clock(host);
+ if (ret)
+ return ret;
- msdc_ungate_clock(host);
msdc_restore_reg(host);
return 0;
}
--
2.34.1
From: Luca Coelho <[email protected]>
[ Upstream commit 459fc0f2c6b0f6e280bfa0f230c100c9dfe3a199 ]
In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet. Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.
Fix that by ignoring the interrupt if prph_info is not set yet.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 8e45eb38304b2..fea89330f692c 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -2261,7 +2261,12 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)
}
}
- if (inta_hw & MSIX_HW_INT_CAUSES_REG_WAKEUP) {
+ /*
+ * In some rare cases when the HW is in a bad state, we may
+ * get this interrupt too early, when prph_info is still NULL.
+ * So make sure that it's not NULL to prevent crashing.
+ */
+ if (inta_hw & MSIX_HW_INT_CAUSES_REG_WAKEUP && trans_pcie->prph_info) {
u32 sleep_notif =
le32_to_cpu(trans_pcie->prph_info->sleep_notif);
if (sleep_notif == IWL_D3_SLEEP_STATUS_SUSPEND ||
--
2.34.1
From: Jan Kara <[email protected]>
[ Upstream commit f05f2429eec60851b98bdde213de31dab697c01b ]
When memory allocation of iinfo or block allocation fails, already
allocated struct udf_inode_info gets freed with iput() and
udf_evict_inode() may look at inode fields which are not properly
initialized. Fix it by marking inode bad before dropping reference to it
in udf_new_inode().
Reported-by: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/udf/ialloc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index 2ecf0e87660e3..b5d611cee749c 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -77,6 +77,7 @@ struct inode *udf_new_inode(struct inode *dir, umode_t mode)
GFP_KERNEL);
}
if (!iinfo->i_data) {
+ make_bad_inode(inode);
iput(inode);
return ERR_PTR(-ENOMEM);
}
@@ -86,6 +87,7 @@ struct inode *udf_new_inode(struct inode *dir, umode_t mode)
dinfo->i_location.partitionReferenceNum,
start, &err);
if (err) {
+ make_bad_inode(inode);
iput(inode);
return ERR_PTR(err);
}
--
2.34.1
From: Wander Lairson Costa <[email protected]>
[ Upstream commit 5ff7c9f9d7e3e0f6db5b81945fa11b69d62f433a ]
If we use the module stall_cpu option, we may get a soft lockup warning
in case we also don't pass the stall_cpu_block option.
Introduce the stall_no_softlockup option to avoid a soft lockup on
cpu stall even if we don't use the stall_cpu_block option.
Signed-off-by: Wander Lairson Costa <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/rcutorture.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index 968696ace8f3f..f922937eb39ad 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -46,6 +46,7 @@
#include <linux/oom.h>
#include <linux/tick.h>
#include <linux/rcupdate_trace.h>
+#include <linux/nmi.h>
#include "rcu.h"
@@ -109,6 +110,8 @@ torture_param(int, shutdown_secs, 0, "Shutdown time (s), <= zero to disable.");
torture_param(int, stall_cpu, 0, "Stall duration (s), zero to disable.");
torture_param(int, stall_cpu_holdoff, 10,
"Time to wait before starting stall (s).");
+torture_param(bool, stall_no_softlockup, false,
+ "Avoid softlockup warning during cpu stall.");
torture_param(int, stall_cpu_irqsoff, 0, "Disable interrupts while stalling.");
torture_param(int, stall_cpu_block, 0, "Sleep while stalling.");
torture_param(int, stall_gp_kthread, 0,
@@ -2052,6 +2055,8 @@ static int rcu_torture_stall(void *args)
#else
schedule_timeout_uninterruptible(HZ);
#endif
+ } else if (stall_no_softlockup) {
+ touch_softlockup_watchdog();
}
if (stall_cpu_irqsoff)
local_irq_enable();
--
2.34.1
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit cfb4c313be670fd4bd09650216620fa4514cdb93 ]
This set HCI_QUIRK_VALID_LE_STATES quirk which is required for the likes
of experimental LE simultaneous roles.
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_vhci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 8ab26dec5f6e8..8469f9876dd26 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -121,6 +121,8 @@ static int __vhci_create_device(struct vhci_data *data, __u8 opcode)
if (opcode & 0x80)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+ set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
if (hci_register_dev(hdev) < 0) {
BT_ERR("Can't register HCI device");
hci_free_dev(hdev);
--
2.34.1
From: Borislav Petkov <[email protected]>
[ Upstream commit 4fbce464db81a42f9a57ee242d6150ec7f996415 ]
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xdb1: call to queue_task_work() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 193204aee8801..c8d121085c8f7 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1454,6 +1454,14 @@ noinstr void do_machine_check(struct pt_regs *regs)
if (worst != MCE_AR_SEVERITY && !kill_current_task)
goto out;
+ /*
+ * Enable instrumentation around the external facilities like
+ * task_work_add() (via queue_task_work()), fixup_exception() etc.
+ * For now, that is. Fixing this properly would need a lot more involved
+ * reorganization.
+ */
+ instrumentation_begin();
+
/* Fault was in user mode and we need to take some action */
if ((m.cs & 3) == 3) {
/* If this triggers there is no way to recover. Die hard. */
@@ -1479,6 +1487,9 @@ noinstr void do_machine_check(struct pt_regs *regs)
if (m.kflags & MCE_IN_KERNEL_COPYIN)
queue_task_work(&m, msg, kill_current_task);
}
+
+ instrumentation_end();
+
out:
mce_wrmsrl(MSR_IA32_MCG_STATUS, 0);
}
--
2.34.1
From: Tianjia Zhang <[email protected]>
[ Upstream commit 95339b70677dc6f9a2d669c4716058e71b8dc1c7 ]
A large number of the following errors is reported when compiling
with clang:
cvmx-bootinfo.h:326:3: error: adding 'int' to a string does not append to the string [-Werror,-Wstring-plus-int]
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */
~~~^~~~
cvmx-bootinfo.h:326:3: note: use array indexing to silence this warning
cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */
^
Follow the prompts to use the address operator '&' to fix this error.
Signed-off-by: Tianjia Zhang <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/octeon/cvmx-bootinfo.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index 0e6bf220db618..6c61e0a639249 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -318,7 +318,7 @@ enum cvmx_chip_types_enum {
/* Functions to return string based on type */
#define ENUM_BRD_TYPE_CASE(x) \
- case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */
+ case x: return (&#x[16]); /* Skip CVMX_BOARD_TYPE_ */
static inline const char *cvmx_board_type_to_string(enum
cvmx_board_types_enum type)
{
@@ -410,7 +410,7 @@ static inline const char *cvmx_board_type_to_string(enum
}
#define ENUM_CHIP_TYPE_CASE(x) \
- case x: return(#x + 15); /* Skip CVMX_CHIP_TYPE */
+ case x: return (&#x[15]); /* Skip CVMX_CHIP_TYPE */
static inline const char *cvmx_chip_type_to_string(enum
cvmx_chip_types_enum type)
{
--
2.34.1
From: Ohad Sharabi <[email protected]>
[ Upstream commit 4fac990f604e6c10538026835a8a30f3c1b6fcf5 ]
Reporting FW errors involves reading of the error registers.
In case we have a corrupted FW descriptor we cannot do that since the
dynamic scratchpad is potentially corrupted as well and may cause kernel
crush when attempting access to a corrupted register offset.
Signed-off-by: Ohad Sharabi <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/habanalabs/common/firmware_if.c | 17 +++++++++++++++--
drivers/misc/habanalabs/common/habanalabs.h | 2 ++
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 8d2568c63f19e..a8e683964ab03 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -1703,6 +1703,9 @@ static int hl_fw_dynamic_validate_descriptor(struct hl_device *hdev,
return rc;
}
+ /* here we can mark the descriptor as valid as the content has been validated */
+ fw_loader->dynamic_loader.fw_desc_valid = true;
+
return 0;
}
@@ -1759,7 +1762,13 @@ static int hl_fw_dynamic_read_and_validate_descriptor(struct hl_device *hdev,
return rc;
}
- /* extract address copy the descriptor from */
+ /*
+ * extract address to copy the descriptor from
+ * in addition, as the descriptor value is going to be over-ridden by new data- we mark it
+ * as invalid.
+ * it will be marked again as valid once validated
+ */
+ fw_loader->dynamic_loader.fw_desc_valid = false;
src = hdev->pcie_bar[region->bar_id] + region->offset_in_bar +
response->ram_offset;
memcpy_fromio(fw_desc, src, sizeof(struct lkd_fw_comms_desc));
@@ -2239,6 +2248,9 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
dev_info(hdev->dev,
"Loading firmware to device, may take some time...\n");
+ /* initialize FW descriptor as invalid */
+ fw_loader->dynamic_loader.fw_desc_valid = false;
+
/*
* In this stage, "cpu_dyn_regs" contains only LKD's hard coded values!
* It will be updated from FW after hl_fw_dynamic_request_descriptor().
@@ -2325,7 +2337,8 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
return 0;
protocol_err:
- fw_read_errors(hdev, le32_to_cpu(dyn_regs->cpu_boot_err0),
+ if (fw_loader->dynamic_loader.fw_desc_valid)
+ fw_read_errors(hdev, le32_to_cpu(dyn_regs->cpu_boot_err0),
le32_to_cpu(dyn_regs->cpu_boot_err1),
le32_to_cpu(dyn_regs->cpu_boot_dev_sts0),
le32_to_cpu(dyn_regs->cpu_boot_dev_sts1));
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index bebebcb163ee8..dfcd87b98ca08 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -992,6 +992,7 @@ struct fw_response {
* @image_region: region to copy the FW image to
* @fw_image_size: size of FW image to load
* @wait_for_bl_timeout: timeout for waiting for boot loader to respond
+ * @fw_desc_valid: true if FW descriptor has been validated and hence the data can be used
*/
struct dynamic_fw_load_mgr {
struct fw_response response;
@@ -999,6 +1000,7 @@ struct dynamic_fw_load_mgr {
struct pci_mem_region *image_region;
size_t fw_image_size;
u32 wait_for_bl_timeout;
+ bool fw_desc_valid;
};
/**
--
2.34.1
From: Michael Ellerman <[email protected]>
[ Upstream commit a8968521cfdc3e339fe69473d6632e0aa8d7202a ]
We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP
before sigreturn. But the chance of it hitting a kernel address and also
clearing MSR_PR is fairly slim.
So add a specific test of sigreturn to a kernel address, both with and
without attempting to clear MSR_PR (which the kernel must block).
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../selftests/powerpc/signal/.gitignore | 1 +
.../testing/selftests/powerpc/signal/Makefile | 1 +
.../powerpc/signal/sigreturn_kernel.c | 132 ++++++++++++++++++
3 files changed, 134 insertions(+)
create mode 100644 tools/testing/selftests/powerpc/signal/sigreturn_kernel.c
diff --git a/tools/testing/selftests/powerpc/signal/.gitignore b/tools/testing/selftests/powerpc/signal/.gitignore
index ce3375cd8e73e..8f6c816099a48 100644
--- a/tools/testing/selftests/powerpc/signal/.gitignore
+++ b/tools/testing/selftests/powerpc/signal/.gitignore
@@ -4,3 +4,4 @@ signal_tm
sigfuz
sigreturn_vdso
sig_sc_double_restart
+sigreturn_kernel
diff --git a/tools/testing/selftests/powerpc/signal/Makefile b/tools/testing/selftests/powerpc/signal/Makefile
index d6ae54663aed7..84e201572466d 100644
--- a/tools/testing/selftests/powerpc/signal/Makefile
+++ b/tools/testing/selftests/powerpc/signal/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
TEST_GEN_PROGS := signal signal_tm sigfuz sigreturn_vdso sig_sc_double_restart
+TEST_GEN_PROGS += sigreturn_kernel
CFLAGS += -maltivec
$(OUTPUT)/signal_tm: CFLAGS += -mhtm
diff --git a/tools/testing/selftests/powerpc/signal/sigreturn_kernel.c b/tools/testing/selftests/powerpc/signal/sigreturn_kernel.c
new file mode 100644
index 0000000000000..0a1b6e591eeed
--- /dev/null
+++ b/tools/testing/selftests/powerpc/signal/sigreturn_kernel.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test that we can't sigreturn to kernel addresses, or to kernel mode.
+ */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "utils.h"
+
+#define MSR_PR (1ul << 14)
+
+static volatile unsigned long long sigreturn_addr;
+static volatile unsigned long long sigreturn_msr_mask;
+
+static void sigusr1_handler(int signo, siginfo_t *si, void *uc_ptr)
+{
+ ucontext_t *uc = (ucontext_t *)uc_ptr;
+
+ if (sigreturn_addr)
+ UCONTEXT_NIA(uc) = sigreturn_addr;
+
+ if (sigreturn_msr_mask)
+ UCONTEXT_MSR(uc) &= sigreturn_msr_mask;
+}
+
+static pid_t fork_child(void)
+{
+ pid_t pid;
+
+ pid = fork();
+ if (pid == 0) {
+ raise(SIGUSR1);
+ exit(0);
+ }
+
+ return pid;
+}
+
+static int expect_segv(pid_t pid)
+{
+ int child_ret;
+
+ waitpid(pid, &child_ret, 0);
+ FAIL_IF(WIFEXITED(child_ret));
+ FAIL_IF(!WIFSIGNALED(child_ret));
+ FAIL_IF(WTERMSIG(child_ret) != 11);
+
+ return 0;
+}
+
+int test_sigreturn_kernel(void)
+{
+ struct sigaction act;
+ int child_ret, i;
+ pid_t pid;
+
+ act.sa_sigaction = sigusr1_handler;
+ act.sa_flags = SA_SIGINFO;
+ sigemptyset(&act.sa_mask);
+
+ FAIL_IF(sigaction(SIGUSR1, &act, NULL));
+
+ for (i = 0; i < 2; i++) {
+ // Return to kernel
+ sigreturn_addr = 0xcull << 60;
+ pid = fork_child();
+ expect_segv(pid);
+
+ // Return to kernel virtual
+ sigreturn_addr = 0xc008ull << 48;
+ pid = fork_child();
+ expect_segv(pid);
+
+ // Return out of range
+ sigreturn_addr = 0xc010ull << 48;
+ pid = fork_child();
+ expect_segv(pid);
+
+ // Return to no-man's land, just below PAGE_OFFSET
+ sigreturn_addr = (0xcull << 60) - (64 * 1024);
+ pid = fork_child();
+ expect_segv(pid);
+
+ // Return to no-man's land, above TASK_SIZE_4PB
+ sigreturn_addr = 0x1ull << 52;
+ pid = fork_child();
+ expect_segv(pid);
+
+ // Return to 0xd space
+ sigreturn_addr = 0xdull << 60;
+ pid = fork_child();
+ expect_segv(pid);
+
+ // Return to 0xe space
+ sigreturn_addr = 0xeull << 60;
+ pid = fork_child();
+ expect_segv(pid);
+
+ // Return to 0xf space
+ sigreturn_addr = 0xfull << 60;
+ pid = fork_child();
+ expect_segv(pid);
+
+ // Attempt to set PR=0 for 2nd loop (should be blocked by kernel)
+ sigreturn_msr_mask = ~MSR_PR;
+ }
+
+ printf("All children killed as expected\n");
+
+ // Don't change address, just MSR, should return to user as normal
+ sigreturn_addr = 0;
+ sigreturn_msr_mask = ~MSR_PR;
+ pid = fork_child();
+ waitpid(pid, &child_ret, 0);
+ FAIL_IF(!WIFEXITED(child_ret));
+ FAIL_IF(WIFSIGNALED(child_ret));
+ FAIL_IF(WEXITSTATUS(child_ret) != 0);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(test_sigreturn_kernel, "sigreturn_kernel");
+}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 399c91c3f30531593e5ff6ca7b53f47092128669 ]
The of_device_get_match_data() function may return NULL.
Add check to prevent potential null dereference.
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/mediatek/phy-mtk-mipi-dsi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index 28ad9403c4414..67b005d5b9e35 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -146,6 +146,8 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return -ENOMEM;
mipi_tx->driver_data = of_device_get_match_data(dev);
+ if (!mipi_tx->driver_data)
+ return -ENODEV;
mipi_tx->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mipi_tx->regs))
--
2.34.1
From: Ilia Mirkin <[email protected]>
commit bd6e07e72f37f34535bec7eebc807e5fcfe37b43 upstream.
The struct is giant, and triggers an order-7 allocation (512K). There is
no reason for this to be kmalloc-type memory, so switch to vmalloc. This
should help loading nouveau on low-memory and/or long-running systems.
Reported-by: Nathan E. Egge <[email protected]>
Signed-off-by: Ilia Mirkin <[email protected]>
Cc: [email protected]
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/dispnv04/disp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/nouveau/dispnv04/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/disp.c
@@ -205,7 +205,7 @@ nv04_display_destroy(struct drm_device *
nvif_notify_dtor(&disp->flip);
nouveau_display(dev)->priv = NULL;
- kfree(disp);
+ vfree(disp);
nvif_object_unmap(&drm->client.device.object);
}
@@ -223,7 +223,7 @@ nv04_display_create(struct drm_device *d
struct nv04_display *disp;
int i, ret;
- disp = kzalloc(sizeof(*disp), GFP_KERNEL);
+ disp = vzalloc(sizeof(*disp));
if (!disp)
return -ENOMEM;
From: Andrew Lunn <[email protected]>
[ Upstream commit e41294408c56c68ea0f269d757527bf33b39118a ]
RFC8754 says:
ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain. The invoking packet in the ICMP error
message may contain an SRH. Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.
For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required. The following logic is used to determine the destination
address for use by protocol-error handlers.
* Walk all extension headers of the invoking IPv6 packet to the
routing extension header preceding the upper-layer header.
- If routing header is type 4 Segment Routing Header (SRH)
o The SID at Segment List[0] may be used as the destination
address of the invoking packet.
Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/ipv6.h | 2 ++
include/net/seg6.h | 1 +
net/ipv6/icmp.c | 6 +++++-
net/ipv6/seg6.c | 30 ++++++++++++++++++++++++++++++
4 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index c383630d3f065..07cba0b3496d5 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -132,6 +132,7 @@ struct inet6_skb_parm {
__u16 dsthao;
#endif
__u16 frag_max_size;
+ __u16 srhoff;
#define IP6SKB_XFRM_TRANSFORMED 1
#define IP6SKB_FORWARDED 2
@@ -141,6 +142,7 @@ struct inet6_skb_parm {
#define IP6SKB_HOPBYHOP 32
#define IP6SKB_L3SLAVE 64
#define IP6SKB_JUMBOGRAM 128
+#define IP6SKB_SEG6 256
};
#if defined(CONFIG_NET_L3_MASTER_DEV)
diff --git a/include/net/seg6.h b/include/net/seg6.h
index a6f25983670aa..02b0cd3057876 100644
--- a/include/net/seg6.h
+++ b/include/net/seg6.h
@@ -59,6 +59,7 @@ extern void seg6_local_exit(void);
extern bool seg6_validate_srh(struct ipv6_sr_hdr *srh, int len, bool reduced);
extern struct ipv6_sr_hdr *seg6_get_srh(struct sk_buff *skb, int flags);
+extern void seg6_icmp_srh(struct sk_buff *skb, struct inet6_skb_parm *opt);
extern int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh,
int proto);
extern int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh);
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index a7c31ab67c5d6..96c5cc0f30ceb 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -57,6 +57,7 @@
#include <net/protocol.h>
#include <net/raw.h>
#include <net/rawv6.h>
+#include <net/seg6.h>
#include <net/transp_v6.h>
#include <net/ip6_route.h>
#include <net/addrconf.h>
@@ -820,6 +821,7 @@ out_bh_enable:
void icmpv6_notify(struct sk_buff *skb, u8 type, u8 code, __be32 info)
{
+ struct inet6_skb_parm *opt = IP6CB(skb);
const struct inet6_protocol *ipprot;
int inner_offset;
__be16 frag_off;
@@ -829,6 +831,8 @@ void icmpv6_notify(struct sk_buff *skb, u8 type, u8 code, __be32 info)
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
goto out;
+ seg6_icmp_srh(skb, opt);
+
nexthdr = ((struct ipv6hdr *)skb->data)->nexthdr;
if (ipv6_ext_hdr(nexthdr)) {
/* now skip over extension headers */
@@ -853,7 +857,7 @@ void icmpv6_notify(struct sk_buff *skb, u8 type, u8 code, __be32 info)
ipprot = rcu_dereference(inet6_protos[nexthdr]);
if (ipprot && ipprot->err_handler)
- ipprot->err_handler(skb, NULL, type, code, inner_offset, info);
+ ipprot->err_handler(skb, opt, type, code, inner_offset, info);
raw6_icmp_error(skb, nexthdr, type, code, inner_offset, info);
return;
diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c
index 0718529088930..fa6b64c95d3ae 100644
--- a/net/ipv6/seg6.c
+++ b/net/ipv6/seg6.c
@@ -104,6 +104,36 @@ struct ipv6_sr_hdr *seg6_get_srh(struct sk_buff *skb, int flags)
return srh;
}
+/* Determine if an ICMP invoking packet contains a segment routing
+ * header. If it does, extract the offset to the true destination
+ * address, which is in the first segment address.
+ */
+void seg6_icmp_srh(struct sk_buff *skb, struct inet6_skb_parm *opt)
+{
+ __u16 network_header = skb->network_header;
+ struct ipv6_sr_hdr *srh;
+
+ /* Update network header to point to the invoking packet
+ * inside the ICMP packet, so we can use the seg6_get_srh()
+ * helper.
+ */
+ skb_reset_network_header(skb);
+
+ srh = seg6_get_srh(skb, 0);
+ if (!srh)
+ goto out;
+
+ if (srh->type != IPV6_SRCRT_TYPE_4)
+ goto out;
+
+ opt->flags |= IP6SKB_SEG6;
+ opt->srhoff = (unsigned char *)srh - skb->data;
+
+out:
+ /* Restore the network header back to the ICMP packet */
+ skb->network_header = network_header;
+}
+
static struct genl_family seg6_genl_family;
static const struct nla_policy seg6_genl_policy[SEG6_ATTR_MAX + 1] = {
--
2.34.1
From: Andrey Ryabinin <[email protected]>
commit dd02d4234c9a2214a81c57a16484304a1a51872a upstream.
cpuacct has 2 different ways of accounting and showing user
and system times.
The first one uses cpuacct_account_field() to account times
and cpuacct.stat file to expose them. And this one seems to work ok.
The second one is uses cpuacct_charge() function for accounting and
set of cpuacct.usage* files to show times. Despite some attempts to
fix it in the past it still doesn't work. Sometimes while running KVM
guest the cpuacct_charge() accounts most of the guest time as
system time. This doesn't match with user&system times shown in
cpuacct.stat or proc/<pid>/stat.
Demonstration:
# git clone https://github.com/aryabinin/kvmsample
# make
# mkdir /sys/fs/cgroup/cpuacct/test
# echo $$ > /sys/fs/cgroup/cpuacct/test/tasks
# ./kvmsample &
# for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done
1976535645
2979839428
3979832704
4983603153
5983604157
Use cpustats accounted in cpuacct_account_field() as the source
of user/sys times for cpuacct.usage* files. Make cpuacct_charge()
to account only summary execution time.
Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage")
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/cpuacct.c | 79 +++++++++++++++++++------------------------------
1 file changed, 32 insertions(+), 47 deletions(-)
--- a/kernel/sched/cpuacct.c
+++ b/kernel/sched/cpuacct.c
@@ -21,15 +21,11 @@ static const char * const cpuacct_stat_d
[CPUACCT_STAT_SYSTEM] = "system",
};
-struct cpuacct_usage {
- u64 usages[CPUACCT_STAT_NSTATS];
-};
-
/* track CPU usage of a group of tasks and its child groups */
struct cpuacct {
struct cgroup_subsys_state css;
/* cpuusage holds pointer to a u64-type object on every CPU */
- struct cpuacct_usage __percpu *cpuusage;
+ u64 __percpu *cpuusage;
struct kernel_cpustat __percpu *cpustat;
};
@@ -49,7 +45,7 @@ static inline struct cpuacct *parent_ca(
return css_ca(ca->css.parent);
}
-static DEFINE_PER_CPU(struct cpuacct_usage, root_cpuacct_cpuusage);
+static DEFINE_PER_CPU(u64, root_cpuacct_cpuusage);
static struct cpuacct root_cpuacct = {
.cpustat = &kernel_cpustat,
.cpuusage = &root_cpuacct_cpuusage,
@@ -68,7 +64,7 @@ cpuacct_css_alloc(struct cgroup_subsys_s
if (!ca)
goto out;
- ca->cpuusage = alloc_percpu(struct cpuacct_usage);
+ ca->cpuusage = alloc_percpu(u64);
if (!ca->cpuusage)
goto out_free_ca;
@@ -99,7 +95,8 @@ static void cpuacct_css_free(struct cgro
static u64 cpuacct_cpuusage_read(struct cpuacct *ca, int cpu,
enum cpuacct_stat_index index)
{
- struct cpuacct_usage *cpuusage = per_cpu_ptr(ca->cpuusage, cpu);
+ u64 *cpuusage = per_cpu_ptr(ca->cpuusage, cpu);
+ u64 *cpustat = per_cpu_ptr(ca->cpustat, cpu)->cpustat;
u64 data;
/*
@@ -115,14 +112,17 @@ static u64 cpuacct_cpuusage_read(struct
raw_spin_rq_lock_irq(cpu_rq(cpu));
#endif
- if (index == CPUACCT_STAT_NSTATS) {
- int i = 0;
-
- data = 0;
- for (i = 0; i < CPUACCT_STAT_NSTATS; i++)
- data += cpuusage->usages[i];
- } else {
- data = cpuusage->usages[index];
+ switch (index) {
+ case CPUACCT_STAT_USER:
+ data = cpustat[CPUTIME_USER] + cpustat[CPUTIME_NICE];
+ break;
+ case CPUACCT_STAT_SYSTEM:
+ data = cpustat[CPUTIME_SYSTEM] + cpustat[CPUTIME_IRQ] +
+ cpustat[CPUTIME_SOFTIRQ];
+ break;
+ case CPUACCT_STAT_NSTATS:
+ data = *cpuusage;
+ break;
}
#ifndef CONFIG_64BIT
@@ -132,10 +132,14 @@ static u64 cpuacct_cpuusage_read(struct
return data;
}
-static void cpuacct_cpuusage_write(struct cpuacct *ca, int cpu, u64 val)
+static void cpuacct_cpuusage_write(struct cpuacct *ca, int cpu)
{
- struct cpuacct_usage *cpuusage = per_cpu_ptr(ca->cpuusage, cpu);
- int i;
+ u64 *cpuusage = per_cpu_ptr(ca->cpuusage, cpu);
+ u64 *cpustat = per_cpu_ptr(ca->cpustat, cpu)->cpustat;
+
+ /* Don't allow to reset global kernel_cpustat */
+ if (ca == &root_cpuacct)
+ return;
#ifndef CONFIG_64BIT
/*
@@ -143,9 +147,10 @@ static void cpuacct_cpuusage_write(struc
*/
raw_spin_rq_lock_irq(cpu_rq(cpu));
#endif
-
- for (i = 0; i < CPUACCT_STAT_NSTATS; i++)
- cpuusage->usages[i] = val;
+ *cpuusage = 0;
+ cpustat[CPUTIME_USER] = cpustat[CPUTIME_NICE] = 0;
+ cpustat[CPUTIME_SYSTEM] = cpustat[CPUTIME_IRQ] = 0;
+ cpustat[CPUTIME_SOFTIRQ] = 0;
#ifndef CONFIG_64BIT
raw_spin_rq_unlock_irq(cpu_rq(cpu));
@@ -196,7 +201,7 @@ static int cpuusage_write(struct cgroup_
return -EINVAL;
for_each_possible_cpu(cpu)
- cpuacct_cpuusage_write(ca, cpu, 0);
+ cpuacct_cpuusage_write(ca, cpu);
return 0;
}
@@ -243,25 +248,10 @@ static int cpuacct_all_seq_show(struct s
seq_puts(m, "\n");
for_each_possible_cpu(cpu) {
- struct cpuacct_usage *cpuusage = per_cpu_ptr(ca->cpuusage, cpu);
-
seq_printf(m, "%d", cpu);
-
- for (index = 0; index < CPUACCT_STAT_NSTATS; index++) {
-#ifndef CONFIG_64BIT
- /*
- * Take rq->lock to make 64-bit read safe on 32-bit
- * platforms.
- */
- raw_spin_rq_lock_irq(cpu_rq(cpu));
-#endif
-
- seq_printf(m, " %llu", cpuusage->usages[index]);
-
-#ifndef CONFIG_64BIT
- raw_spin_rq_unlock_irq(cpu_rq(cpu));
-#endif
- }
+ for (index = 0; index < CPUACCT_STAT_NSTATS; index++)
+ seq_printf(m, " %llu",
+ cpuacct_cpuusage_read(ca, cpu, index));
seq_puts(m, "\n");
}
return 0;
@@ -339,16 +329,11 @@ static struct cftype files[] = {
void cpuacct_charge(struct task_struct *tsk, u64 cputime)
{
struct cpuacct *ca;
- int index = CPUACCT_STAT_SYSTEM;
- struct pt_regs *regs = get_irq_regs() ? : task_pt_regs(tsk);
-
- if (regs && user_mode(regs))
- index = CPUACCT_STAT_USER;
rcu_read_lock();
for (ca = task_ca(tsk); ca; ca = parent_ca(ca))
- __this_cpu_add(ca->cpuusage->usages[index], cputime);
+ __this_cpu_add(*ca->cpuusage, cputime);
rcu_read_unlock();
}
From: Alexey Kardashevskiy <[email protected]>
[ Upstream commit 511d25d6b789fffcb20a3eb71899cf974a31bd9d ]
The userspace can trigger "vmalloc size %lu allocation failure: exceeds
total pages" via the KVM_SET_USER_MEMORY_REGION ioctl.
This silences the warning by checking the limit before calling vzalloc()
and returns ENOMEM if failed.
This does not call underlying valloc helpers as __vmalloc_node() is only
exported when CONFIG_TEST_VMALLOC_MODULE and __vmalloc_node_range() is
not exported at all.
Spotted by syzkaller.
Signed-off-by: Alexey Kardashevskiy <[email protected]>
[mpe: Use 'size' for the variable rather than 'cb']
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/book3s_hv.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 7b74fc0a986b8..94da0d25eb125 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -4861,8 +4861,12 @@ static int kvmppc_core_prepare_memory_region_hv(struct kvm *kvm,
unsigned long npages = mem->memory_size >> PAGE_SHIFT;
if (change == KVM_MR_CREATE) {
- slot->arch.rmap = vzalloc(array_size(npages,
- sizeof(*slot->arch.rmap)));
+ unsigned long size = array_size(npages, sizeof(*slot->arch.rmap));
+
+ if ((size >> PAGE_SHIFT) > totalram_pages())
+ return -ENOMEM;
+
+ slot->arch.rmap = vzalloc(size);
if (!slot->arch.rmap)
return -ENOMEM;
}
--
2.34.1
From: Xiangyang Zhang <[email protected]>
commit dfea08a2116fe327f79d8f4d4b2cf6e0c88be11f upstream.
The 'nmissed' column of the 'kprobe_profile' file for kretprobe is
not showed correctly, kretprobe can be skipped by two reasons,
shortage of kretprobe_instance which is counted by tk->rp.nmissed,
and kprobe itself is missed by some reason, so to show the sum.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 4a846b443b4e ("tracing/kprobes: Cleanup kprobe tracer code")
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Xiangyang Zhang <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_kprobe.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1175,15 +1175,18 @@ static int probes_profile_seq_show(struc
{
struct dyn_event *ev = v;
struct trace_kprobe *tk;
+ unsigned long nmissed;
if (!is_trace_kprobe(ev))
return 0;
tk = to_trace_kprobe(ev);
+ nmissed = trace_kprobe_is_return(tk) ?
+ tk->rp.kp.nmissed + tk->rp.nmissed : tk->rp.kp.nmissed;
seq_printf(m, " %-44s %15lu %15lu\n",
trace_probe_name(&tk->tp),
trace_kprobe_nhit(tk),
- tk->rp.kp.nmissed);
+ nmissed);
return 0;
}
From: Sakari Ailus <[email protected]>
commit 4a7f4110f79163fd53ea65438041994ed615e3af upstream.
For each endpoint it encounters, fwnode_graph_devcon_match() checks
whether the endpoint's remote port parent device is available. If it is
not, it ignores the endpoint but does not put the reference to the remote
endpoint port parent fwnode. For available devices the fwnode handle
reference is put as expected.
Put the reference for unavailable devices now.
Fixes: 637e9e52b185 ("device connection: Find device connections also from device graphs")
Cc: 5.1+ <[email protected]> # 5.1+
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/property.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -1269,8 +1269,10 @@ fwnode_graph_devcon_match(struct fwnode_
fwnode_graph_for_each_endpoint(fwnode, ep) {
node = fwnode_graph_get_remote_port_parent(ep);
- if (!fwnode_device_is_available(node))
+ if (!fwnode_device_is_available(node)) {
+ fwnode_handle_put(node);
continue;
+ }
ret = match(node, con_id, data);
fwnode_handle_put(node);
From: Ilan Peer <[email protected]>
commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream.
With the introduction of 6GHz channels the scan guard timeout should
be adjusted to account for the following extreme case:
- All 6GHz channels are scanned passively: 58 channels.
- The scan is fragmented with the following parameters: 3 fragments,
95 TUs suspend time, 44 TUs maximal out of channel time.
The above would result with scan time of more than 24 seconds. Thus,
set the timeout to 30 seconds.
Cc: [email protected]
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -2487,7 +2487,7 @@ static int iwl_mvm_check_running_scans(s
return -EIO;
}
-#define SCAN_TIMEOUT 20000
+#define SCAN_TIMEOUT 30000
void iwl_mvm_scan_timeout_wk(struct work_struct *work)
{
From: Josef Bacik <[email protected]>
[ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ]
If we're looking for leafs that point to a data extent we want to record
the extent items that point at our bytenr. At this point we have the
reference and we know for a fact that this leaf should have a reference
to our bytenr. However if there's some sort of corruption we may not
find any references to our leaf, and thus could end up with eie == NULL.
Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the
mortals.
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/backref.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 6b4b0f105a572..8b090c40daf77 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1365,10 +1365,18 @@ again:
goto out;
if (!ret && extent_item_pos) {
/*
- * we've recorded that parent, so we must extend
- * its inode list here
+ * We've recorded that parent, so we must extend
+ * its inode list here.
+ *
+ * However if there was corruption we may not
+ * have found an eie, return an error in this
+ * case.
*/
- BUG_ON(!eie);
+ ASSERT(eie);
+ if (!eie) {
+ ret = -EUCLEAN;
+ goto out;
+ }
while (eie->next)
eie = eie->next;
eie->next = ref->inode_list;
--
2.34.1
From: Danielle Ratson <[email protected]>
[ Upstream commit d43e4271747ace01a27a49a97a397cb4219f6487 ]
Locally generated packets ingress the device through its CPU port. When
the CPU port is congested and there are not enough credits in its
headroom buffer, packets can be dropped.
While this might be acceptable for data packets that traverse the
network, configuration packets exchanged between the host and the device
(EMADs) should not be subjected to this flow control.
The "sdq_lp" bit in the SDQ (Send Descriptor Queue) context allows the
host to instruct the device to treat packets sent on this queue as
"local processing" and always process them, regardless of the state of
the CPU port's headroom.
Add the definition of this bit and set it for the dedicated SDQ reserved
for the transmission of EMAD packets. This makes the "local processing"
bit in the WQE (Work Queue Element) redundant, so clear it.
Signed-off-by: Danielle Ratson <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/cmd.h | 12 ++++++++++++
drivers/net/ethernet/mellanox/mlxsw/pci.c | 6 +++++-
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/cmd.h b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
index 392ce3cb27f72..51b260d54237e 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/cmd.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
@@ -935,6 +935,18 @@ static inline int mlxsw_cmd_sw2hw_rdq(struct mlxsw_core *mlxsw_core,
*/
MLXSW_ITEM32(cmd_mbox, sw2hw_dq, cq, 0x00, 24, 8);
+enum mlxsw_cmd_mbox_sw2hw_dq_sdq_lp {
+ MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_WQE,
+ MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_IGNORE_WQE,
+};
+
+/* cmd_mbox_sw2hw_dq_sdq_lp
+ * SDQ local Processing
+ * 0: local processing by wqe.lp
+ * 1: local processing (ignoring wqe.lp)
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_dq, sdq_lp, 0x00, 23, 1);
+
/* cmd_mbox_sw2hw_dq_sdq_tclass
* SDQ: CPU Egress TClass
* RDQ: Reserved
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index 01c3235ab2bdf..d9f9cbba62465 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -285,6 +285,7 @@ static int mlxsw_pci_sdq_init(struct mlxsw_pci *mlxsw_pci, char *mbox,
struct mlxsw_pci_queue *q)
{
int tclass;
+ int lp;
int i;
int err;
@@ -292,9 +293,12 @@ static int mlxsw_pci_sdq_init(struct mlxsw_pci *mlxsw_pci, char *mbox,
q->consumer_counter = 0;
tclass = q->num == MLXSW_PCI_SDQ_EMAD_INDEX ? MLXSW_PCI_SDQ_EMAD_TC :
MLXSW_PCI_SDQ_CTL_TC;
+ lp = q->num == MLXSW_PCI_SDQ_EMAD_INDEX ? MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_IGNORE_WQE :
+ MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_WQE;
/* Set CQ of same number of this SDQ. */
mlxsw_cmd_mbox_sw2hw_dq_cq_set(mbox, q->num);
+ mlxsw_cmd_mbox_sw2hw_dq_sdq_lp_set(mbox, lp);
mlxsw_cmd_mbox_sw2hw_dq_sdq_tclass_set(mbox, tclass);
mlxsw_cmd_mbox_sw2hw_dq_log2_dq_sz_set(mbox, 3); /* 8 pages */
for (i = 0; i < MLXSW_PCI_AQ_PAGES; i++) {
@@ -1678,7 +1682,7 @@ static int mlxsw_pci_skb_transmit(void *bus_priv, struct sk_buff *skb,
wqe = elem_info->elem;
mlxsw_pci_wqe_c_set(wqe, 1); /* always report completion */
- mlxsw_pci_wqe_lp_set(wqe, !!tx_info->is_emad);
+ mlxsw_pci_wqe_lp_set(wqe, 0);
mlxsw_pci_wqe_type_set(wqe, MLXSW_PCI_WQE_TYPE_ETHERNET);
err = mlxsw_pci_wqe_frag_map(mlxsw_pci, wqe, 0, skb->data,
--
2.34.1
From: Aaron Ma <[email protected]>
commit b9b5948cdd7bc8d9fa31c78cbbb04382c815587f upstream.
qmi tries to allocate a large contiguous dma memory at first,
on the AMD Ryzen platform it fails, then retries with small slices.
So set flag GFP_NOWARN to avoid flooding dmesg.
Signed-off-by: Aaron Ma <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: "Limonciello, Mario" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath11k/qmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1770,7 +1770,7 @@ static int ath11k_qmi_alloc_target_mem_c
chunk->vaddr = dma_alloc_coherent(ab->dev,
chunk->size,
&chunk->paddr,
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (!chunk->vaddr) {
if (ab->qmi.mem_seg_count <= ATH11K_QMI_FW_MEM_REQ_SEGMENT_CNT) {
ath11k_dbg(ab, ATH11K_DBG_QMI,
From: Suresh Udipi <[email protected]>
commit 549cc89cd09a85aaa16dc07ef3db811d5cf9bcb1 upstream.
PHTW register is selected based on default bit rate from Table[1].
for the bit rates less than or equal to 250. Currently first
value of default bit rate which is greater than or equal to
the caculated mbps is selected. This selection can be further
improved by selecting the default bit rate which is nearest to
the calculated value.
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12]
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <[email protected]>
Signed-off-by: Michael Rodin <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -989,10 +989,17 @@ static int rcsi2_phtw_write_mbps(struct
const struct rcsi2_mbps_reg *values, u16 code)
{
const struct rcsi2_mbps_reg *value;
+ const struct rcsi2_mbps_reg *prev_value = NULL;
- for (value = values; value->mbps; value++)
+ for (value = values; value->mbps; value++) {
if (value->mbps >= mbps)
break;
+ prev_value = value;
+ }
+
+ if (prev_value &&
+ ((mbps - prev_value->mbps) <= (value->mbps - mbps)))
+ value = prev_value;
if (!value->mbps) {
dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps);
From: John David Anglin <[email protected]>
commit db19c6f1a2a353cc8dec35b4789733a3cf6e2838 upstream.
While working on the rewrite to the light-weight syscall and futex code, I
experimented with using a hash index based on the user physical address of
atomic variable. This exposed two problems with the lpa and lpa_user defines.
Because of the copy instruction, the pa argument needs to be an early clobber
argument. This prevents gcc from allocating the va and pa arguments to the same
register.
Secondly, the lpa instruction can cause a page fault so we need to catch
exceptions.
Signed-off-by: John David Anglin <[email protected]>
Fixes: 116d753308cf ("parisc: Use lpa instruction to load physical addresses in driver code")
Signed-off-by: Helge Deller <[email protected]>
Cc: [email protected] # v5.2+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/include/asm/special_insns.h | 44 +++++++++++++++++---------------
1 file changed, 24 insertions(+), 20 deletions(-)
--- a/arch/parisc/include/asm/special_insns.h
+++ b/arch/parisc/include/asm/special_insns.h
@@ -2,28 +2,32 @@
#ifndef __PARISC_SPECIAL_INSNS_H
#define __PARISC_SPECIAL_INSNS_H
-#define lpa(va) ({ \
- unsigned long pa; \
- __asm__ __volatile__( \
- "copy %%r0,%0\n\t" \
- "lpa %%r0(%1),%0" \
- : "=r" (pa) \
- : "r" (va) \
- : "memory" \
- ); \
- pa; \
+#define lpa(va) ({ \
+ unsigned long pa; \
+ __asm__ __volatile__( \
+ "copy %%r0,%0\n" \
+ "8:\tlpa %%r0(%1),%0\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY(8b, 9b) \
+ : "=&r" (pa) \
+ : "r" (va) \
+ : "memory" \
+ ); \
+ pa; \
})
-#define lpa_user(va) ({ \
- unsigned long pa; \
- __asm__ __volatile__( \
- "copy %%r0,%0\n\t" \
- "lpa %%r0(%%sr3,%1),%0" \
- : "=r" (pa) \
- : "r" (va) \
- : "memory" \
- ); \
- pa; \
+#define lpa_user(va) ({ \
+ unsigned long pa; \
+ __asm__ __volatile__( \
+ "copy %%r0,%0\n" \
+ "8:\tlpa %%r0(%%sr3,%1),%0\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY(8b, 9b) \
+ : "=&r" (pa) \
+ : "r" (va) \
+ : "memory" \
+ ); \
+ pa; \
})
#define mfctl(reg) ({ \
From: Hans de Goede <[email protected]>
commit 085a9f43433f30cbe8a1ade62d9d7827c3217f4d upstream.
Use down_read_nested() and down_write_nested() when taking the
ctrl->reset_lock rw-sem, passing the number of PCIe hotplug controllers in
the path to the PCI root bus as lock subclass parameter.
This fixes the following false-positive lockdep report when unplugging a
Lenovo X1C8 from a Lenovo 2nd gen TB3 dock:
pcieport 0000:06:01.0: pciehp: Slot(1): Link Down
pcieport 0000:06:01.0: pciehp: Slot(1): Card not present
============================================
WARNING: possible recursive locking detected
5.16.0-rc2+ #621 Not tainted
--------------------------------------------
irq/124-pciehp/86 is trying to acquire lock:
ffff8e5ac4299ef8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_check_presence+0x23/0x80
but task is already holding lock:
ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ctrl->reset_lock);
lock(&ctrl->reset_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by irq/124-pciehp/86:
#0: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180
#1: ffffffffa3b024e8 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pciehp_unconfigure_device+0x31/0x110
#2: ffff8e5ac1ee2248 (&dev->mutex){....}-{3:3}, at: device_release_driver+0x1c/0x40
stack backtrace:
CPU: 4 PID: 86 Comm: irq/124-pciehp Not tainted 5.16.0-rc2+ #621
Hardware name: LENOVO 20U90SIT19/20U90SIT19, BIOS N2WET30W (1.20 ) 08/26/2021
Call Trace:
<TASK>
dump_stack_lvl+0x59/0x73
__lock_acquire.cold+0xc5/0x2c6
lock_acquire+0xb5/0x2b0
down_read+0x3e/0x50
pciehp_check_presence+0x23/0x80
pciehp_runtime_resume+0x5c/0xa0
device_for_each_child+0x45/0x70
pcie_port_device_runtime_resume+0x20/0x30
pci_pm_runtime_resume+0xa7/0xc0
__rpm_callback+0x41/0x110
rpm_callback+0x59/0x70
rpm_resume+0x512/0x7b0
__pm_runtime_resume+0x4a/0x90
__device_release_driver+0x28/0x240
device_release_driver+0x26/0x40
pci_stop_bus_device+0x68/0x90
pci_stop_bus_device+0x2c/0x90
pci_stop_and_remove_bus_device+0xe/0x20
pciehp_unconfigure_device+0x6c/0x110
pciehp_disable_slot+0x5b/0xe0
pciehp_handle_presence_or_link_change+0xc3/0x2f0
pciehp_ist+0x179/0x180
This lockdep warning is triggered because with Thunderbolt, hotplug ports
are nested. When removing multiple devices in a daisy-chain, each hotplug
port's reset_lock may be acquired recursively. It's never the same lock, so
the lockdep splat is a false positive.
Because locks at the same hierarchy level are never acquired recursively, a
per-level lockdep class is sufficient to fix the lockdep warning.
The choice to use one lockdep subclass per pcie-hotplug controller in the
path to the root-bus was made to conserve class keys because their number
is limited and the complexity grows quadratically with number of keys
according to Documentation/locking/lockdep-design.rst.
Link: https://lore.kernel.org/linux-pci/[email protected]/
Link: https://lore.kernel.org/linux-pci/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208855
Reported-by: "Theodore Ts'o" <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lukas Wunner <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/hotplug/pciehp.h | 3 +++
drivers/pci/hotplug/pciehp_core.c | 2 +-
drivers/pci/hotplug/pciehp_hpc.c | 21 ++++++++++++++++++---
3 files changed, 22 insertions(+), 4 deletions(-)
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -75,6 +75,8 @@ extern int pciehp_poll_time;
* @reset_lock: prevents access to the Data Link Layer Link Active bit in the
* Link Status register and to the Presence Detect State bit in the Slot
* Status register during a slot reset which may cause them to flap
+ * @depth: Number of additional hotplug ports in the path to the root bus,
+ * used as lock subclass for @reset_lock
* @ist_running: flag to keep user request waiting while IRQ thread is running
* @request_result: result of last user request submitted to the IRQ thread
* @requester: wait queue to wake up on completion of user request,
@@ -106,6 +108,7 @@ struct controller {
struct hotplug_slot hotplug_slot; /* hotplug core interface */
struct rw_semaphore reset_lock;
+ unsigned int depth;
unsigned int ist_running;
int request_result;
wait_queue_head_t requester;
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -166,7 +166,7 @@ static void pciehp_check_presence(struct
{
int occupied;
- down_read(&ctrl->reset_lock);
+ down_read_nested(&ctrl->reset_lock, ctrl->depth);
mutex_lock(&ctrl->state_lock);
occupied = pciehp_card_present_or_link_active(ctrl);
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -583,7 +583,7 @@ static void pciehp_ignore_dpc_link_chang
* the corresponding link change may have been ignored above.
* Synthesize it to ensure that it is acted on.
*/
- down_read(&ctrl->reset_lock);
+ down_read_nested(&ctrl->reset_lock, ctrl->depth);
if (!pciehp_check_link_active(ctrl))
pciehp_request(ctrl, PCI_EXP_SLTSTA_DLLSC);
up_read(&ctrl->reset_lock);
@@ -746,7 +746,7 @@ static irqreturn_t pciehp_ist(int irq, v
* Disable requests have higher priority than Presence Detect Changed
* or Data Link Layer State Changed events.
*/
- down_read(&ctrl->reset_lock);
+ down_read_nested(&ctrl->reset_lock, ctrl->depth);
if (events & DISABLE_SLOT)
pciehp_handle_disable_request(ctrl);
else if (events & (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC))
@@ -880,7 +880,7 @@ int pciehp_reset_slot(struct hotplug_slo
if (probe)
return 0;
- down_write(&ctrl->reset_lock);
+ down_write_nested(&ctrl->reset_lock, ctrl->depth);
if (!ATTN_BUTTN(ctrl)) {
ctrl_mask |= PCI_EXP_SLTCTL_PDCE;
@@ -936,6 +936,20 @@ static inline void dbg_ctrl(struct contr
#define FLAG(x, y) (((x) & (y)) ? '+' : '-')
+static inline int pcie_hotplug_depth(struct pci_dev *dev)
+{
+ struct pci_bus *bus = dev->bus;
+ int depth = 0;
+
+ while (bus->parent) {
+ bus = bus->parent;
+ if (bus->self && bus->self->is_hotplug_bridge)
+ depth++;
+ }
+
+ return depth;
+}
+
struct controller *pcie_init(struct pcie_device *dev)
{
struct controller *ctrl;
@@ -949,6 +963,7 @@ struct controller *pcie_init(struct pcie
return NULL;
ctrl->pcie = dev;
+ ctrl->depth = pcie_hotplug_depth(dev->port);
pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap);
if (pdev->hotplug_user_indicators)
From: Pali Rohár <[email protected]>
commit 1f1050c5e1fefb34ac90a506b43e9da803b5f8f7 upstream.
Older mvebu hardware provides PCIe Capability structure only in version 1.
New mvebu and aardvark hardware provides it in version 2. So do not force
version to 2 in pci_bridge_emul_init() and rather allow drivers to set
correct version. Drivers need to set version in pcie_conf.cap field without
overwriting PCI_CAP_LIST_ID register. Both drivers (mvebu and aardvark) do
not provide slot support yet, so do not set PCI_EXP_FLAGS_SLOT flag.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 4 +++-
drivers/pci/controller/pci-mvebu.c | 8 ++++++++
drivers/pci/pci-bridge-emul.c | 5 +----
3 files changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -872,7 +872,6 @@ advk_pci_bridge_emul_pcie_conf_read(stru
return PCI_BRIDGE_EMUL_HANDLED;
}
- case PCI_CAP_LIST_ID:
case PCI_EXP_DEVCAP:
case PCI_EXP_DEVCTL:
*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
@@ -953,6 +952,9 @@ static int advk_sw_pci_bridge_init(struc
/* Support interrupt A for MSI feature */
bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE;
+ /* Aardvark HW provides PCIe Capability structure in version 2 */
+ bridge->pcie_conf.cap = cpu_to_le16(2);
+
/* Indicates supports for Completion Retry Status */
bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -573,6 +573,8 @@ static struct pci_bridge_emul_ops mvebu_
static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
{
struct pci_bridge_emul *bridge = &port->bridge;
+ u32 pcie_cap = mvebu_readl(port, PCIE_CAP_PCIEXP);
+ u8 pcie_cap_ver = ((pcie_cap >> 16) & PCI_EXP_FLAGS_VERS);
bridge->conf.vendor = PCI_VENDOR_ID_MARVELL;
bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
@@ -585,6 +587,12 @@ static void mvebu_pci_bridge_emul_init(s
bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
}
+ /*
+ * Older mvebu hardware provides PCIe Capability structure only in
+ * version 1. New hardware provides it in version 2.
+ */
+ bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver);
+
bridge->has_pcie = true;
bridge->data = port;
bridge->ops = &mvebu_pci_bridge_emul_ops;
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -297,10 +297,7 @@ int pci_bridge_emul_init(struct pci_brid
if (bridge->has_pcie) {
bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START;
bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP;
- /* Set PCIe v2, root port, slot support */
- bridge->pcie_conf.cap =
- cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
- PCI_EXP_FLAGS_SLOT);
+ bridge->pcie_conf.cap |= cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4);
bridge->pcie_cap_regs_behavior =
kmemdup(pcie_cap_regs_behavior,
sizeof(pcie_cap_regs_behavior),
From: José Roberto de Souza <[email protected]>
commit ef3ac01564067a4337bb798b8eddc6ea7b78fd10 upstream.
EHL table was recently updated with some minor fixes.
BSpec: 21257
Cc: [email protected]
Cc: Clint Taylor <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Clint Taylor <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 5ec7baef52c367cdbda964aa662f7135c25bab1f)
Signed-off-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
@@ -476,14 +476,14 @@ static const struct intel_ddi_buf_trans
static const union intel_ddi_buf_trans_entry _ehl_combo_phy_ddi_translations_dp[] = {
/* NT mV Trans mV db */
{ .icl = { 0xA, 0x33, 0x3F, 0x00, 0x00 } }, /* 350 350 0.0 */
- { .icl = { 0xA, 0x47, 0x36, 0x00, 0x09 } }, /* 350 500 3.1 */
- { .icl = { 0xC, 0x64, 0x34, 0x00, 0x0B } }, /* 350 700 6.0 */
- { .icl = { 0x6, 0x7F, 0x30, 0x00, 0x0F } }, /* 350 900 8.2 */
+ { .icl = { 0xA, 0x47, 0x38, 0x00, 0x07 } }, /* 350 500 3.1 */
+ { .icl = { 0xC, 0x64, 0x33, 0x00, 0x0C } }, /* 350 700 6.0 */
+ { .icl = { 0x6, 0x7F, 0x2F, 0x00, 0x10 } }, /* 350 900 8.2 */
{ .icl = { 0xA, 0x46, 0x3F, 0x00, 0x00 } }, /* 500 500 0.0 */
- { .icl = { 0xC, 0x64, 0x38, 0x00, 0x07 } }, /* 500 700 2.9 */
+ { .icl = { 0xC, 0x64, 0x37, 0x00, 0x08 } }, /* 500 700 2.9 */
{ .icl = { 0x6, 0x7F, 0x32, 0x00, 0x0D } }, /* 500 900 5.1 */
{ .icl = { 0xC, 0x61, 0x3F, 0x00, 0x00 } }, /* 650 700 0.6 */
- { .icl = { 0x6, 0x7F, 0x38, 0x00, 0x07 } }, /* 600 900 3.5 */
+ { .icl = { 0x6, 0x7F, 0x37, 0x00, 0x08 } }, /* 600 900 3.5 */
{ .icl = { 0x6, 0x7F, 0x3F, 0x00, 0x00 } }, /* 900 900 0.0 */
};
From: Pali Rohár <[email protected]>
commit 3be9d243b21724d49b65043d4520d688b6040b36 upstream.
Since all PCI Express device Functions are required to implement the PCI
Express Capability structure, Capabilities List bit in PCI Status Register
must be hardwired to 1b. Capabilities Pointer register (which is already
set by pci-bride-emul.c driver) is valid only when Capabilities List is set
to 1b.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -296,6 +296,7 @@ int pci_bridge_emul_init(struct pci_brid
if (bridge->has_pcie) {
bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START;
+ bridge->conf.status |= cpu_to_le16(PCI_STATUS_CAP_LIST);
bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP;
bridge->pcie_conf.cap |= cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4);
bridge->pcie_cap_regs_behavior =
From: Baruch Siach <[email protected]>
commit 5d05b811b5acb92fc581a7b328b36646c86f5ab9 upstream.
The cells_name field of of_phandle_iterator might be NULL. Use the
phandle name instead. With this change instead of:
OF: /soc/pinctrl@1000000: (null) = 3 found 2
We get:
OF: /soc/pinctrl@1000000: phandle pinctrl@1000000 needs 3, found 2
Which is a more helpful messages making DT debugging easier.
In this particular example the phandle name looks like duplicate of the
same node name. But note that the first node is the parent node
(it->parent), while the second is the phandle target (it->node). They
happen to be the same in the case that triggered this improvement. See
commit 72cb4c48a46a ("arm64: dts: qcom: ipq6018: Fix gpio-ranges
property").
Signed-off-by: Baruch Siach <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/f6a68e0088a552ea9dfd4d8e3b5b586d92594738.1640881913.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/of/base.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1327,9 +1327,14 @@ int of_phandle_iterator_next(struct of_p
* property data length
*/
if (it->cur + count > it->list_end) {
- pr_err("%pOF: %s = %d found %td\n",
- it->parent, it->cells_name,
- count, it->list_end - it->cur);
+ if (it->cells_name)
+ pr_err("%pOF: %s = %d found %td\n",
+ it->parent, it->cells_name,
+ count, it->list_end - it->cur);
+ else
+ pr_err("%pOF: phandle %s needs %d, found %td\n",
+ it->parent, of_node_full_name(it->node),
+ count, it->list_end - it->cur);
goto err;
}
}
From: Christian König <[email protected]>
commit 4722f463896cc0ef1a6f1c3cb2e171e949831249 upstream.
The return value was never initialized so the cleanup code executed when
it isn't even necessary.
Just add proper error handling.
Fixes: ab50cb9df889 ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()")
Signed-off-by: Christian König <[email protected]>
Tested-by: Jan Stancek <[email protected]>
Tested-by: Borislav Petkov <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_kms.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -666,18 +666,18 @@ int radeon_driver_open_kms(struct drm_de
fpriv = kzalloc(sizeof(*fpriv), GFP_KERNEL);
if (unlikely(!fpriv)) {
r = -ENOMEM;
- goto out_suspend;
+ goto err_suspend;
}
if (rdev->accel_working) {
vm = &fpriv->vm;
r = radeon_vm_init(rdev, vm);
if (r)
- goto out_fpriv;
+ goto err_fpriv;
r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false);
if (r)
- goto out_vm_fini;
+ goto err_vm_fini;
/* map the ib pool buffer read only into
* virtual address space */
@@ -685,7 +685,7 @@ int radeon_driver_open_kms(struct drm_de
rdev->ring_tmp_bo.bo);
if (!vm->ib_bo_va) {
r = -ENOMEM;
- goto out_vm_fini;
+ goto err_vm_fini;
}
r = radeon_vm_bo_set_addr(rdev, vm->ib_bo_va,
@@ -693,19 +693,21 @@ int radeon_driver_open_kms(struct drm_de
RADEON_VM_PAGE_READABLE |
RADEON_VM_PAGE_SNOOPED);
if (r)
- goto out_vm_fini;
+ goto err_vm_fini;
}
file_priv->driver_priv = fpriv;
}
- if (!r)
- goto out_suspend;
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+ return 0;
-out_vm_fini:
+err_vm_fini:
radeon_vm_fini(rdev, vm);
-out_fpriv:
+err_fpriv:
kfree(fpriv);
-out_suspend:
+
+err_suspend:
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
return r;
From: Ingo Molnar <[email protected]>
[ Upstream commit b6aa86cff44cf099299d3a5e66348cb709cd7964 ]
Most distro kernels have this option enabled, to improve debug output.
Lockdep also selects it.
Enable this in the defconfig kernel as well, to make it more
representative of what people are using on x86.
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/configs/i386_defconfig | 1 +
arch/x86/configs/x86_64_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index e81885384f604..99398cbdae434 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -262,3 +262,4 @@ CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_BOOT_PARAMS=y
+CONFIG_KALLSYMS_ALL=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index e8a7a0af2bdaa..d7298b104a456 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -258,3 +258,4 @@ CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_BOOT_PARAMS=y
+CONFIG_KALLSYMS_ALL=y
--
2.34.1
From: James Smart <[email protected]>
[ Upstream commit f0d3919697492950f57a26a1093aee53880d669d ]
During rmmod testing, messages appeared indicating lpfc_mbuf_pool entries
were still busy. This situation was only seen doing rmmod after at least 1
vport (NPIV) instance was created and destroyed. The number of messages
scaled with the number of vports created.
When a vport is created, it can receive a PLOGI from another initiator
Nport. When this happens, the driver prepares to ack the PLOGI and
prepares an RPI for registration (via mbx cmd) which includes an mbuf
allocation. During the unsolicited PLOGI processing and after the RPI
preparation, the driver recognizes it is one of the vport instances and
decides to reject the PLOGI. During the LS_RJT preparation for the PLOGI,
the mailbox struct allocated for RPI registration is freed, but the mbuf
that was also allocated is not released.
Fix by freeing the mbuf with the mailbox struct in the LS_RJT path.
As part of the code review to figure the issue out a couple of other areas
where found that also would not have released the mbuf. Those are cleaned
up as well.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_els.c | 6 +++++-
drivers/scsi/lpfc/lpfc_init.c | 8 ++++++--
drivers/scsi/lpfc/lpfc_nportdisc.c | 6 ++++++
3 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index f7197b7161d52..6d7b9571f5c03 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -6877,6 +6877,7 @@ static int
lpfc_get_rdp_info(struct lpfc_hba *phba, struct lpfc_rdp_context *rdp_context)
{
LPFC_MBOXQ_t *mbox = NULL;
+ struct lpfc_dmabuf *mp;
int rc;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
@@ -6892,8 +6893,11 @@ lpfc_get_rdp_info(struct lpfc_hba *phba, struct lpfc_rdp_context *rdp_context)
mbox->mbox_cmpl = lpfc_mbx_cmpl_rdp_page_a0;
mbox->ctx_ndlp = (struct lpfc_rdp_context *)rdp_context;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED)
+ if (rc == MBX_NOT_FINISHED) {
+ mp = (struct lpfc_dmabuf *)mbox->ctx_buf;
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
goto issue_mbox_fail;
+ }
return 0;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0fee8d590b0c4..2bbd1be6cc5d4 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5314,8 +5314,10 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
*/
if (!(phba->hba_flag & HBA_FCOE_MODE)) {
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED)
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
goto out_free_dmabuf;
+ }
return;
}
/*
@@ -6266,8 +6268,10 @@ lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc)
}
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED)
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
goto out_free_dmabuf;
+ }
return;
out_free_dmabuf:
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 27263f02ab9f6..7d717a4ac14d1 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -322,6 +322,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_dmabuf *pcmd;
+ struct lpfc_dmabuf *mp;
uint64_t nlp_portwwn = 0;
uint32_t *lp;
IOCB_t *icmd;
@@ -571,6 +572,11 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
* a default RPI.
*/
if (phba->sli_rev == LPFC_SLI_REV4) {
+ mp = (struct lpfc_dmabuf *)login_mbox->ctx_buf;
+ if (mp) {
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ }
mempool_free(login_mbox, phba->mbox_mem_pool);
login_mbox = NULL;
} else {
--
2.34.1
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit c5c88591040ee7d84d037328eed9019d3ffab821 ]
Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox
Some IP core versions cannot receive CAN RTR messages via mailboxes.
This patch adds quirks to document this.
This information will be used in a later patch to switch from FIFO to
more performant mailbox mode at the expense of losing the ability to
receive RTR messages. This trade off is beneficial in certain use
cases.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/flexcan.c | 66 ++++++++++++++++++++++++++++++++-------
1 file changed, 54 insertions(+), 12 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 02299befe2852..18d7bb99ec1bd 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -252,6 +252,12 @@
#define FLEXCAN_QUIRK_NR_IRQ_3 BIT(12)
/* Setup 16 mailboxes */
#define FLEXCAN_QUIRK_NR_MB_16 BIT(13)
+/* Device supports RX via mailboxes */
+#define FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX BIT(14)
+/* Device supports RTR reception via mailboxes */
+#define FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR BIT(15)
+/* Device supports RX via FIFO */
+#define FLEXCAN_QUIRK_SUPPPORT_RX_FIFO BIT(16)
/* Structure of the message buffer */
struct flexcan_mb {
@@ -382,59 +388,78 @@ struct flexcan_priv {
static const struct flexcan_devtype_data fsl_mcf5441x_devtype_data = {
.quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE |
- FLEXCAN_QUIRK_NR_IRQ_3 | FLEXCAN_QUIRK_NR_MB_16,
+ FLEXCAN_QUIRK_NR_IRQ_3 | FLEXCAN_QUIRK_NR_MB_16 |
+ FLEXCAN_QUIRK_SUPPPORT_RX_FIFO,
};
static const struct flexcan_devtype_data fsl_p1010_devtype_data = {
.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
FLEXCAN_QUIRK_BROKEN_PERR_STATE |
- FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN,
+ FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_FIFO,
};
static const struct flexcan_devtype_data fsl_imx25_devtype_data = {
.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
- FLEXCAN_QUIRK_BROKEN_PERR_STATE,
+ FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_FIFO,
};
static const struct flexcan_devtype_data fsl_imx28_devtype_data = {
- .quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE,
+ .quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_FIFO,
};
static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
- FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR,
+ FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
};
static const struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
- FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW,
+ FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
};
static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
- FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC,
+ FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
};
static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
- FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC,
+ FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
};
static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_RX_MAILBOX,
+ FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
};
static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_SUPPORT_FD |
- FLEXCAN_QUIRK_SUPPORT_ECC,
+ FLEXCAN_QUIRK_SUPPORT_ECC |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
};
static const struct can_bittiming_const flexcan_bittiming_const = {
@@ -2164,8 +2189,25 @@ static int flexcan_probe(struct platform_device *pdev)
return -ENODEV;
if ((devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_FD) &&
- !(devtype_data->quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)) {
- dev_err(&pdev->dev, "CAN-FD mode doesn't work with FIFO mode!\n");
+ !((devtype_data->quirks &
+ (FLEXCAN_QUIRK_USE_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR |
+ FLEXCAN_QUIRK_SUPPPORT_RX_FIFO)) ==
+ (FLEXCAN_QUIRK_USE_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR))) {
+ dev_err(&pdev->dev, "CAN-FD mode doesn't work in RX-FIFO mode!\n");
+ return -EINVAL;
+ }
+
+ if ((devtype_data->quirks &
+ (FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR)) ==
+ FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR) {
+ dev_err(&pdev->dev,
+ "Quirks (0x%08x) inconsistent: RX_MAILBOX_RX supported but not RX_MAILBOX\n",
+ devtype_data->quirks);
return -EINVAL;
}
--
2.34.1
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 34ea4e1c99f1f177f87e4ae7896caef238dd741a ]
Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox
The names for these modes were chosen to reflect the name of the
rx-offload mode they are using.
The name of the RX modes should better reflect their difference with
regards the flexcan IP core. So this patch renames the various
occurrences of OFF_FIFO to RX_FIFO and OFF_TIMESTAMP to RX_MAILBOX:
| FLEXCAN_TX_MB_RESERVED_OFF_FIFO -> FLEXCAN_TX_MB_RESERVED_RX_FIFO
| FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP -> FLEXCAN_TX_MB_RESERVED_RX_MAILBOX
| FLEXCAN_QUIRK_USE_OFF_TIMESTAMP -> FLEXCAN_QUIRK_USE_RX_MAILBOX
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/flexcan.c | 48 +++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 3178557e40208..02299befe2852 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -173,9 +173,9 @@
/* FLEXCAN interrupt flag register (IFLAG) bits */
/* Errata ERR005829 step7: Reserve first valid MB */
-#define FLEXCAN_TX_MB_RESERVED_OFF_FIFO 8
-#define FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP 0
-#define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST (FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP + 1)
+#define FLEXCAN_TX_MB_RESERVED_RX_FIFO 8
+#define FLEXCAN_TX_MB_RESERVED_RX_MAILBOX 0
+#define FLEXCAN_RX_MB_RX_MAILBOX_FIRST (FLEXCAN_TX_MB_RESERVED_RX_MAILBOX + 1)
#define FLEXCAN_IFLAG_MB(x) BIT_ULL(x)
#define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7)
#define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6)
@@ -234,8 +234,8 @@
#define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3)
/* Disable non-correctable errors interrupt and freeze mode */
#define FLEXCAN_QUIRK_DISABLE_MECR BIT(4)
-/* Use timestamp based offloading */
-#define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP BIT(5)
+/* Use mailboxes (not FIFO) for RX path */
+#define FLEXCAN_QUIRK_USE_RX_MAILBOX BIT(5)
/* No interrupt for error passive */
#define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6)
/* default to BE register access */
@@ -402,38 +402,38 @@ static const struct flexcan_devtype_data fsl_imx28_devtype_data = {
static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+ FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR,
};
static const struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+ FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW,
};
static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
+ FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC,
};
static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
+ FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC,
};
static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
+ FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_RX_MAILBOX,
};
static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
- FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD |
+ FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_SUPPORT_FD |
FLEXCAN_QUIRK_SUPPORT_ECC,
};
@@ -1018,7 +1018,7 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
mb = flexcan_get_mb(priv, n);
- if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
u32 code;
do {
@@ -1083,7 +1083,7 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
}
mark_as_read:
- if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)
flexcan_write64(priv, FLEXCAN_IFLAG_MB(n), ®s->iflag1);
else
priv->write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->iflag1);
@@ -1109,7 +1109,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
enum can_state last_state = priv->can.state;
/* reception interrupt */
- if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
u64 reg_iflag_rx;
int ret;
@@ -1429,20 +1429,20 @@ static int flexcan_rx_offload_setup(struct net_device *dev)
priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
(sizeof(priv->regs->mb[1]) / priv->mb_size);
- if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)
priv->tx_mb_reserved =
- flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP);
+ flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_RX_MAILBOX);
else
priv->tx_mb_reserved =
- flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_OFF_FIFO);
+ flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_RX_FIFO);
priv->tx_mb_idx = priv->mb_count - 1;
priv->tx_mb = flexcan_get_mb(priv, priv->tx_mb_idx);
priv->tx_mask = FLEXCAN_IFLAG_MB(priv->tx_mb_idx);
priv->offload.mailbox_read = flexcan_mailbox_read;
- if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
- priv->offload.mb_first = FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST;
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
+ priv->offload.mb_first = FLEXCAN_RX_MB_RX_MAILBOX_FIRST;
priv->offload.mb_last = priv->mb_count - 2;
priv->rx_mask = GENMASK_ULL(priv->offload.mb_last,
@@ -1532,10 +1532,10 @@ static int flexcan_chip_start(struct net_device *dev)
/* MCR
*
* FIFO:
- * - disable for timestamp mode
+ * - disable for mailbox mode
* - enable for FIFO mode
*/
- if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)
reg_mcr &= ~FLEXCAN_MCR_FEN;
else
reg_mcr |= FLEXCAN_MCR_FEN;
@@ -1631,7 +1631,7 @@ static int flexcan_chip_start(struct net_device *dev)
priv->write(reg_fdctrl, ®s->fdctrl);
}
- if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) {
mb = flexcan_get_mb(priv, i);
priv->write(FLEXCAN_MB_CODE_RX_EMPTY,
@@ -1639,7 +1639,7 @@ static int flexcan_chip_start(struct net_device *dev)
}
} else {
/* clear and invalidate unused mailboxes first */
- for (i = FLEXCAN_TX_MB_RESERVED_OFF_FIFO; i < priv->mb_count; i++) {
+ for (i = FLEXCAN_TX_MB_RESERVED_RX_FIFO; i < priv->mb_count; i++) {
mb = flexcan_get_mb(priv, i);
priv->write(FLEXCAN_MB_CODE_RX_INACTIVE,
&mb->can_ctrl);
@@ -2164,7 +2164,7 @@ static int flexcan_probe(struct platform_device *pdev)
return -ENODEV;
if ((devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_FD) &&
- !(devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)) {
+ !(devtype_data->quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)) {
dev_err(&pdev->dev, "CAN-FD mode doesn't work with FIFO mode!\n");
return -EINVAL;
}
--
2.34.1
From: Alex Elder <[email protected]>
[ Upstream commit c0d6316c238b1bd743108bd4b08eda364f47c7c9 ]
The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.
Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.
Reported-by: David Heidelberg <[email protected]>
Tested-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1e6ce035f76a9..b5b784c5c65e4 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -334,12 +334,10 @@
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
- interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>,
- <&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
- interconnect-names = "memory-a",
- "memory-b",
+ interconnect-names = "memory",
"imem",
"config";
--
2.34.1
From: Nikita Yushchenko <[email protected]>
commit 0878355b51f5f26632e652c848a8e174bb02d22d upstream.
If start_per_cpu_kthreads() called from osnoise_workload_start() returns
error, event hooks are left in broken state: unhook_irq_events() called
but unhook_thread_events() and unhook_softirq_events() not called, and
trace_osnoise_callback_enabled flag not cleared.
On the next tracer enable, hooks get not installed due to
trace_osnoise_callback_enabled flag.
And on the further tracer disable an attempt to remove non-installed
hooks happened, hitting a WARN_ON_ONCE() in tracepoint_remove_func().
Fix the error path by adding the missing part of cleanup.
While at this, introduce osnoise_unhook_events() to avoid code
duplication between this error path and normal tracer disable.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: bce29ac9ce0b ("trace: Add osnoise tracer")
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Nikita Yushchenko <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_osnoise.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--- a/kernel/trace/trace_osnoise.c
+++ b/kernel/trace/trace_osnoise.c
@@ -1932,6 +1932,13 @@ out_unhook_irq:
return -EINVAL;
}
+static void osnoise_unhook_events(void)
+{
+ unhook_thread_events();
+ unhook_softirq_events();
+ unhook_irq_events();
+}
+
static int __osnoise_tracer_start(struct trace_array *tr)
{
int retval;
@@ -1949,7 +1956,14 @@ static int __osnoise_tracer_start(struct
retval = start_per_cpu_kthreads(tr);
if (retval) {
- unhook_irq_events();
+ trace_osnoise_callback_enabled = false;
+ /*
+ * Make sure that ftrace_nmi_enter/exit() see
+ * trace_osnoise_callback_enabled as false before continuing.
+ */
+ barrier();
+
+ osnoise_unhook_events();
return retval;
}
@@ -1981,9 +1995,7 @@ static void osnoise_tracer_stop(struct t
stop_per_cpu_kthreads();
- unhook_irq_events();
- unhook_softirq_events();
- unhook_thread_events();
+ osnoise_unhook_events();
osnoise_busy = false;
}
From: Biwen Li <[email protected]>
[ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ]
The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index bfd14b64567e4..2f92e62ecafe9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -272,11 +272,6 @@
vcc-supply = <&sb_3v3>;
};
- rtc@51 {
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@@ -318,6 +313,15 @@
};
+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-connection-type = "rgmii-id";
--
2.34.1
From: Weili Qian <[email protected]>
[ Upstream commit 51fa916b81e5f406a74f14a31a3a228c3cc060ad ]
hpre_curve25519_src_init() allocates memory for 'ptr' before calling
memcmp(). If memcmp() returns 0, the function will return '-EINVAL'
without freeing memory.
Signed-off-by: Weili Qian <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/hisilicon/hpre/hpre_crypto.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/hisilicon/hpre/hpre_crypto.c b/drivers/crypto/hisilicon/hpre/hpre_crypto.c
index a032c192ef1d6..7ba7641723a0b 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_crypto.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_crypto.c
@@ -1865,7 +1865,7 @@ static int hpre_curve25519_src_init(struct hpre_asym_request *hpre_req,
*/
if (memcmp(ptr, p, ctx->key_sz) == 0) {
dev_err(dev, "gx is p!\n");
- return -EINVAL;
+ goto err;
} else if (memcmp(ptr, p, ctx->key_sz) > 0) {
hpre_curve25519_src_modulo_p(ptr);
}
--
2.34.1
From: Conor Dooley <[email protected]>
[ Upstream commit f10b1fc0161cd99e54c5687fcc63368aa255e05e ]
The Polarfire SoC is currently using two different compatible string
prefixes. Fix this by changing "polarfire-soc-*" strings to "mpfs-*" in
its system controller in order to match the compatible string used in
the soc binding and device tree.
Signed-off-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mailbox/mailbox-mpfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mailbox/mailbox-mpfs.c b/drivers/mailbox/mailbox-mpfs.c
index 0d6e2231a2c75..4e34854d12389 100644
--- a/drivers/mailbox/mailbox-mpfs.c
+++ b/drivers/mailbox/mailbox-mpfs.c
@@ -232,7 +232,7 @@ static int mpfs_mbox_probe(struct platform_device *pdev)
}
static const struct of_device_id mpfs_mbox_of_match[] = {
- {.compatible = "microchip,polarfire-soc-mailbox", },
+ {.compatible = "microchip,mpfs-mailbox", },
{},
};
MODULE_DEVICE_TABLE(of, mpfs_mbox_of_match);
--
2.34.1
From: Nicholas Piggin <[email protected]>
commit 467ba14e1660b52a2f9338b484704c461bd23019 upstream.
pmd_huge() is defined to false when HUGETLB_PAGE is not configured, but
the vmap code still installs huge PMDs. This leads to false bad PMD
errors when vunmapping because it is not seen as a huge PTE, and the bad
PMD check catches it. The end result may not be much more serious than
some bad pmd warning messages, because the pmd_none_or_clear_bad() does
what we wanted and clears the huge PTE anyway.
Fix this by checking pmd_is_leaf(), which checks for a PTE regardless of
config options. The whole huge/large/leaf stuff is a tangled mess but
that's kernel-wide and not something we can improve much in arch/powerpc
code.
pmd_page(), pud_page(), etc., called by vmalloc_to_page() on huge vmaps
can similarly trigger a false VM_BUG_ON when CONFIG_HUGETLB_PAGE=n, so
those checks are adjusted. The checks were added by commit d6eacedd1f0e
("powerpc/book3s: Use config independent helpers for page table walk"),
while implementing a similar fix for other page table walking functions.
Fixes: d909f9109c30 ("powerpc/64s/radix: Enable HAVE_ARCH_HUGE_VMAP")
Cc: [email protected] # v5.3+
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 ++--
arch/powerpc/mm/pgtable_64.c | 14 +++++++++++---
2 files changed, 13 insertions(+), 5 deletions(-)
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -1093,7 +1093,7 @@ int pud_set_huge(pud_t *pud, phys_addr_t
int pud_clear_huge(pud_t *pud)
{
- if (pud_huge(*pud)) {
+ if (pud_is_leaf(*pud)) {
pud_clear(pud);
return 1;
}
@@ -1140,7 +1140,7 @@ int pmd_set_huge(pmd_t *pmd, phys_addr_t
int pmd_clear_huge(pmd_t *pmd)
{
- if (pmd_huge(*pmd)) {
+ if (pmd_is_leaf(*pmd)) {
pmd_clear(pmd);
return 1;
}
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -102,7 +102,8 @@ EXPORT_SYMBOL(__pte_frag_size_shift);
struct page *p4d_page(p4d_t p4d)
{
if (p4d_is_leaf(p4d)) {
- VM_WARN_ON(!p4d_huge(p4d));
+ if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMAP))
+ VM_WARN_ON(!p4d_huge(p4d));
return pte_page(p4d_pte(p4d));
}
return virt_to_page(p4d_pgtable(p4d));
@@ -112,7 +113,8 @@ struct page *p4d_page(p4d_t p4d)
struct page *pud_page(pud_t pud)
{
if (pud_is_leaf(pud)) {
- VM_WARN_ON(!pud_huge(pud));
+ if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMAP))
+ VM_WARN_ON(!pud_huge(pud));
return pte_page(pud_pte(pud));
}
return virt_to_page(pud_pgtable(pud));
@@ -125,7 +127,13 @@ struct page *pud_page(pud_t pud)
struct page *pmd_page(pmd_t pmd)
{
if (pmd_is_leaf(pmd)) {
- VM_WARN_ON(!(pmd_large(pmd) || pmd_huge(pmd)));
+ /*
+ * vmalloc_to_page may be called on any vmap address (not only
+ * vmalloc), and it uses pmd_page() etc., when huge vmap is
+ * enabled so these checks can't be used.
+ */
+ if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMAP))
+ VM_WARN_ON(!(pmd_large(pmd) || pmd_huge(pmd)));
return pte_page(pmd_pte(pmd));
}
return virt_to_page(pmd_page_vaddr(pmd));
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit d1579e61192e0e686faa4208500ef4c3b529b16c ]
Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.
To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.
This change is not expected to have any visible functional impact.
Reported-by: Peter Zijlstra <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/core.c | 3 +--
drivers/base/power/runtime.c | 41 ++++++++++++++++++++++++++----------
include/linux/pm_runtime.h | 3 +++
3 files changed, 34 insertions(+), 13 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 63577de268565..8e73a34e10055 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -485,8 +485,7 @@ static void device_link_release_fn(struct work_struct *work)
/* Ensure that all references to the link object have been dropped. */
device_link_synchronize_removal();
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put(link->supplier);
+ pm_runtime_release_supplier(link, true);
put_device(link->consumer);
put_device(link->supplier);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index ec94049442b99..44ae3909e64bb 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -305,19 +305,40 @@ static int rpm_get_suppliers(struct device *dev)
return 0;
}
+/**
+ * pm_runtime_release_supplier - Drop references to device link's supplier.
+ * @link: Target device link.
+ * @check_idle: Whether or not to check if the supplier device is idle.
+ *
+ * Drop all runtime PM references associated with @link to its supplier device
+ * and if @check_idle is set, check if that device is idle (and so it can be
+ * suspended).
+ */
+void pm_runtime_release_supplier(struct device_link *link, bool check_idle)
+{
+ struct device *supplier = link->supplier;
+
+ /*
+ * The additional power.usage_count check is a safety net in case
+ * the rpm_active refcount becomes saturated, in which case
+ * refcount_dec_not_one() would return true forever, but it is not
+ * strictly necessary.
+ */
+ while (refcount_dec_not_one(&link->rpm_active) &&
+ atomic_read(&supplier->power.usage_count) > 0)
+ pm_runtime_put_noidle(supplier);
+
+ if (check_idle)
+ pm_request_idle(supplier);
+}
+
static void __rpm_put_suppliers(struct device *dev, bool try_to_suspend)
{
struct device_link *link;
list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
- device_links_read_lock_held()) {
-
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put_noidle(link->supplier);
-
- if (try_to_suspend)
- pm_request_idle(link->supplier);
- }
+ device_links_read_lock_held())
+ pm_runtime_release_supplier(link, try_to_suspend);
}
static void rpm_put_suppliers(struct device *dev)
@@ -1770,9 +1791,7 @@ void pm_runtime_drop_link(struct device_link *link)
return;
pm_runtime_drop_link_count(link->consumer);
-
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put(link->supplier);
+ pm_runtime_release_supplier(link, true);
}
static bool pm_runtime_need_not_resume(struct device *dev)
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index eddd66d426caf..016de5776b6db 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -58,6 +58,7 @@ extern void pm_runtime_get_suppliers(struct device *dev);
extern void pm_runtime_put_suppliers(struct device *dev);
extern void pm_runtime_new_link(struct device *dev);
extern void pm_runtime_drop_link(struct device_link *link);
+extern void pm_runtime_release_supplier(struct device_link *link, bool check_idle);
extern int devm_pm_runtime_enable(struct device *dev);
@@ -283,6 +284,8 @@ static inline void pm_runtime_get_suppliers(struct device *dev) {}
static inline void pm_runtime_put_suppliers(struct device *dev) {}
static inline void pm_runtime_new_link(struct device *dev) {}
static inline void pm_runtime_drop_link(struct device_link *link) {}
+static inline void pm_runtime_release_supplier(struct device_link *link,
+ bool check_idle) {}
#endif /* !CONFIG_PM */
--
2.34.1
From: Pali Rohár <[email protected]>
commit 12998087d9f48b66965b97412069c7826502cd7e upstream.
Some bits in PCI_EXP registers are reserved for non-root ports. Driver
pci-bridge-emul.c implements PCIe Root Port device therefore it should not
allow setting reserved bits of registers.
Properly define non-reserved bits for all PCI_EXP registers.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 36 +++++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 11 deletions(-)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -176,41 +176,55 @@ struct pci_bridge_reg_behavior pcie_cap_
[PCI_CAP_LIST_ID / 4] = {
/*
* Capability ID, Next Capability Pointer and
- * Capabilities register are all read-only.
+ * bits [14:0] of Capabilities register are all read-only.
+ * Bit 15 of Capabilities register is reserved.
*/
- .ro = ~0,
+ .ro = GENMASK(30, 0),
},
[PCI_EXP_DEVCAP / 4] = {
- .ro = ~0,
+ /*
+ * Bits [31:29] and [17:16] are reserved.
+ * Bits [27:18] are reserved for non-upstream ports.
+ * Bits 28 and [14:6] are reserved for non-endpoint devices.
+ * Other bits are read-only.
+ */
+ .ro = BIT(15) | GENMASK(5, 0),
},
[PCI_EXP_DEVCTL / 4] = {
- /* Device control register is RW */
- .rw = GENMASK(15, 0),
+ /*
+ * Device control register is RW, except bit 15 which is
+ * reserved for non-endpoints or non-PCIe-to-PCI/X bridges.
+ */
+ .rw = GENMASK(14, 0),
/*
* Device status register has bits 6 and [3:0] W1C, [5:4] RO,
- * the rest is reserved
+ * the rest is reserved. Also bit 6 is reserved for non-upstream
+ * ports.
*/
- .w1c = (BIT(6) | GENMASK(3, 0)) << 16,
+ .w1c = GENMASK(3, 0) << 16,
.ro = GENMASK(5, 4) << 16,
},
[PCI_EXP_LNKCAP / 4] = {
- /* All bits are RO, except bit 23 which is reserved */
- .ro = lower_32_bits(~BIT(23)),
+ /*
+ * All bits are RO, except bit 23 which is reserved and
+ * bit 18 which is reserved for non-upstream ports.
+ */
+ .ro = lower_32_bits(~(BIT(23) | PCI_EXP_LNKCAP_CLKPM)),
},
[PCI_EXP_LNKCTL / 4] = {
/*
* Link control has bits [15:14], [11:3] and [1:0] RW, the
- * rest is reserved.
+ * rest is reserved. Bit 8 is reserved for non-upstream ports.
*
* Link status has bits [13:0] RO, and bits [15:14]
* W1C.
*/
- .rw = GENMASK(15, 14) | GENMASK(11, 3) | GENMASK(1, 0),
+ .rw = GENMASK(15, 14) | GENMASK(11, 9) | GENMASK(7, 3) | GENMASK(1, 0),
.ro = GENMASK(13, 0) << 16,
.w1c = GENMASK(15, 14) << 16,
},
From: Pali Rohár <[email protected]>
commit 7b067ac63a5730d2fae18399fed7e45f23d36912 upstream.
Some bits in PCI config space are reserved when device is PCIe. Properly
define behavior of PCI registers for PCIe emulated bridge and ensure that
it would not be possible change these reserved bits.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -295,6 +295,27 @@ int pci_bridge_emul_init(struct pci_brid
kfree(bridge->pci_regs_behavior);
return -ENOMEM;
}
+ /* These bits are applicable only for PCI and reserved on PCIe */
+ bridge->pci_regs_behavior[PCI_CACHE_LINE_SIZE / 4].ro &=
+ ~GENMASK(15, 8);
+ bridge->pci_regs_behavior[PCI_COMMAND / 4].ro &=
+ ~((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE |
+ PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT |
+ PCI_COMMAND_FAST_BACK) |
+ (PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
+ PCI_STATUS_DEVSEL_MASK) << 16);
+ bridge->pci_regs_behavior[PCI_PRIMARY_BUS / 4].ro &=
+ ~GENMASK(31, 24);
+ bridge->pci_regs_behavior[PCI_IO_BASE / 4].ro &=
+ ~((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
+ PCI_STATUS_DEVSEL_MASK) << 16);
+ bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].rw &=
+ ~((PCI_BRIDGE_CTL_MASTER_ABORT |
+ BIT(8) | BIT(9) | BIT(11)) << 16);
+ bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].ro &=
+ ~((PCI_BRIDGE_CTL_FAST_BACK) << 16);
+ bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].w1c &=
+ ~(BIT(10) << 16);
}
if (flags & PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR) {
From: Xie Yongji <[email protected]>
commit e388164ea385f04666c4633f5dc4f951fca71890 upstream.
The acceptable maximum value of lend parameter in
filemap_write_and_wait_range() is LLONG_MAX rather than -1. And there is
also some logic depending on LLONG_MAX check in write_cache_pages(). So
let's pass LLONG_MAX to filemap_write_and_wait_range() in
fuse_writeback_range() instead.
Fixes: 59bda8ecee2f ("fuse: flush extending writes")
Signed-off-by: Xie Yongji <[email protected]>
Cc: <[email protected]> # v5.15
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2913,7 +2913,7 @@ fuse_direct_IO(struct kiocb *iocb, struc
static int fuse_writeback_range(struct inode *inode, loff_t start, loff_t end)
{
- int err = filemap_write_and_wait_range(inode->i_mapping, start, -1);
+ int err = filemap_write_and_wait_range(inode->i_mapping, start, LLONG_MAX);
if (!err)
fuse_sync_writes(inode);
From: Peter Chiu <[email protected]>
[ Upstream commit 8c55516de3f9b76b9d9444e7890682ec2efc809f ]
ieee80211_register_hw() is called with rtnl_lock held, and this could be
caused lockdep from a work item that's on a workqueue that is flushed
with the rtnl held.
Move mt7615_register_ext_phy() outside the init_work().
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index a2465b49ecd0c..87b4aa52ee0f9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -28,8 +28,6 @@ static void mt7615_pci_init_work(struct work_struct *work)
return;
mt7615_init_work(dev);
- if (dev->dbdc_support)
- mt7615_register_ext_phy(dev);
}
static int mt7615_init_hardware(struct mt7615_dev *dev)
@@ -160,6 +158,12 @@ int mt7615_register_device(struct mt7615_dev *dev)
mt7615_init_txpower(dev, &dev->mphy.sband_2g.sband);
mt7615_init_txpower(dev, &dev->mphy.sband_5g.sband);
+ if (dev->dbdc_support) {
+ ret = mt7615_register_ext_phy(dev);
+ if (ret)
+ return ret;
+ }
+
return mt7615_init_debugfs(dev);
}
--
2.34.1
From: Rob Herring <[email protected]>
commit c7a75d07827a1f33d566e18e6098379cc2a0c2b2 upstream.
Commit 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
broke PCI support on XGene. The cause is the IB resources are now sorted
in address order instead of being in DT dma-ranges order. The result is
which inbound registers are used for each region are swapped. I don't
know the details about this h/w, but it appears that IB region 0
registers can't handle a size greater than 4GB. In any case, limiting
the size for region 0 is enough to get back to the original assignment
of dma-ranges to regions.
Link: https://lore.kernel.org/all/CA+enf=v9rY_xnZML01oEgKLmvY1NGBUUhnSJaETmXtDtXfaczA@mail.gmail.com/
Link: https://lore.kernel.org/r/[email protected]
Fixes: 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
Reported-by: Stéphane Graber <[email protected]>
Tested-by: Stéphane Graber <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
Cc: [email protected] # v5.5+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-xgene.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -466,7 +466,7 @@ static int xgene_pcie_select_ib_reg(u8 *
return 1;
}
- if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
+ if ((size > SZ_1K) && (size < SZ_4G) && !(*ib_reg_mask & (1 << 0))) {
*ib_reg_mask |= (1 << 0);
return 0;
}
From: Thadeu Lima de Souza Cascardo <[email protected]>
[ Upstream commit 3c42e9542050d49610077e083c7c3f5fd5e26820 ]
A mis-match between reported and actual mitigation is not restricted to the
Vulnerable case. The guest might also report the mitigation as "Software
count cache flush" and the host will still mitigate with branch cache
disabled.
So, instead of skipping depending on the detected mitigation, simply skip
whenever the detected miss_percent is the expected one for a fully
mitigated system, that is, above 95%.
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/security/spectre_v2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/powerpc/security/spectre_v2.c b/tools/testing/selftests/powerpc/security/spectre_v2.c
index adc2b7294e5fd..83647b8277e7d 100644
--- a/tools/testing/selftests/powerpc/security/spectre_v2.c
+++ b/tools/testing/selftests/powerpc/security/spectre_v2.c
@@ -193,7 +193,7 @@ int spectre_v2_test(void)
* We are not vulnerable and reporting otherwise, so
* missing such a mismatch is safe.
*/
- if (state == VULNERABLE)
+ if (miss_percent > 95)
return 4;
return 1;
--
2.34.1
From: Miaoqian Lin <[email protected]>
commit 3ba880a12df5aa4488c18281701b5b1bc3d4531a upstream.
The function regulator_get() returns an error pointer. Use IS_ERR() to
validate the return value.
Link: https://lore.kernel.org/r/[email protected]
Fixes: cf137b3ea49a ("scsi: ufs-mediatek: Support VA09 regulator operations")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ufs/ufs-mediatek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -501,7 +501,7 @@ static void ufs_mtk_init_va09_pwr_ctrl(s
struct ufs_mtk_host *host = ufshcd_get_variant(hba);
host->reg_va09 = regulator_get(hba->dev, "va09");
- if (!host->reg_va09)
+ if (IS_ERR(host->reg_va09))
dev_info(hba->dev, "failed to get va09");
else
host->caps |= UFS_MTK_CAP_VA09_PWR_CTRL;
From: Xin Yin <[email protected]>
commit 9725958bb75cdfa10f2ec11526fdb23e7485e8e4 upstream.
If use FALLOC_FL_KEEP_SIZE to alloc unwritten range at bottom, the
inode->i_size will not include the unwritten range. When call
ftruncate with fast commit enabled, it will miss to track the
unwritten range.
Change to trace the full range during ftruncate.
Signed-off-by: Xin Yin <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5414,8 +5414,7 @@ int ext4_setattr(struct user_namespace *
ext4_fc_track_range(handle, inode,
(attr->ia_size > 0 ? attr->ia_size - 1 : 0) >>
inode->i_sb->s_blocksize_bits,
- (oldsize > 0 ? oldsize - 1 : 0) >>
- inode->i_sb->s_blocksize_bits);
+ EXT_MAX_BLOCKS - 1);
else
ext4_fc_track_range(
handle, inode,
From: Harshad Shirwadkar <[email protected]>
commit c27c29c6af4f3f4ce925a2111c256733c5a5b430 upstream.
It is not guaranteed that __ext4_get_inode_loc will definitely set
err_blk pointer when it returns EIO. To avoid using uninitialized
variables, let's first set err_blk to 0.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4371,7 +4371,7 @@ has_buffer:
static int __ext4_get_inode_loc_noinmem(struct inode *inode,
struct ext4_iloc *iloc)
{
- ext4_fsblk_t err_blk;
+ ext4_fsblk_t err_blk = 0;
int ret;
ret = __ext4_get_inode_loc(inode->i_sb, inode->i_ino, iloc, 0,
@@ -4386,7 +4386,7 @@ static int __ext4_get_inode_loc_noinmem(
int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc)
{
- ext4_fsblk_t err_blk;
+ ext4_fsblk_t err_blk = 0;
int ret;
/* We have all inode data except xattrs in memory here. */
From: Chao Yu <[email protected]>
commit b702c83e2eaa2fa2d72e957c55c0321535cc8b9f upstream.
Otherwise, nat_bit area may be persisted across boundary of CP area during
nat_bit rebuilding.
Fixes: 94c821fb286b ("f2fs: rebuild nat_bits during umount")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/checkpoint.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -1305,8 +1305,8 @@ static void update_ckpt_flags(struct f2f
unsigned long flags;
if (cpc->reason & CP_UMOUNT) {
- if (le32_to_cpu(ckpt->cp_pack_total_block_count) >
- sbi->blocks_per_seg - NM_I(sbi)->nat_bits_blocks) {
+ if (le32_to_cpu(ckpt->cp_pack_total_block_count) +
+ NM_I(sbi)->nat_bits_blocks > sbi->blocks_per_seg) {
clear_ckpt_flags(sbi, CP_NAT_BITS_FLAG);
f2fs_notice(sbi, "Disable nat_bits due to no space");
} else if (!is_set_ckpt_flags(sbi, CP_NAT_BITS_FLAG) &&
From: Yury Norov <[email protected]>
commit b7ec62d7ee0f0b8af6ba190501dff7f9ee6545ca upstream.
find_first_bit() and find_first_zero_bit() are not protected with
ifdefs as other functions in find.h. It causes build errors on some
platforms if CONFIG_GENERIC_FIND_FIRST_BIT is enabled.
Signed-off-by: Yury Norov <[email protected]>
Fixes: 2cc7b6a44ac2 ("lib: add fast path for find_first_*_bit() and find_last_bit()")
Reported-by: kernel test robot <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/asm-generic/bitops/find.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/asm-generic/bitops/find.h b/include/asm-generic/bitops/find.h
index 0d132ee2a291..835f959a25f2 100644
--- a/include/asm-generic/bitops/find.h
+++ b/include/asm-generic/bitops/find.h
@@ -97,6 +97,7 @@ unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size,
#ifdef CONFIG_GENERIC_FIND_FIRST_BIT
+#ifndef find_first_bit
/**
* find_first_bit - find the first set bit in a memory region
* @addr: The address to start the search at
@@ -116,7 +117,9 @@ unsigned long find_first_bit(const unsigned long *addr, unsigned long size)
return _find_first_bit(addr, size);
}
+#endif
+#ifndef find_first_zero_bit
/**
* find_first_zero_bit - find the first cleared bit in a memory region
* @addr: The address to start the search at
@@ -136,6 +139,8 @@ unsigned long find_first_zero_bit(const unsigned long *addr, unsigned long size)
return _find_first_zero_bit(addr, size);
}
+#endif
+
#else /* CONFIG_GENERIC_FIND_FIRST_BIT */
#ifndef find_first_bit
--
2.34.1
From: Yafang Shao <[email protected]>
commit 1e9d74660d4df625b0889e77018f9e94727ceacd upstream.
We noticed our tc ebpf tools can't start after we upgrade our in-house kernel
version from 4.19 to 5.10. That is because of the behaviour change in bpffs
caused by commit d2935de7e4fd ("vfs: Convert bpf to use the new mount API").
In our tc ebpf tools, we do strict environment check. If the environment is
not matched, we won't allow to start the ebpf progs. One of the check is whether
bpffs is properly mounted. The mount information of bpffs in kernel-4.19 and
kernel-5.10 are as follows:
- kernel 4.19
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
- kernel 5.10
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
none on /sys/fs/bpf type bpf (rw,relatime)
The device name in kernel-5.10 is displayed as none instead of bpffs, then our
environment check fails. Currently we modify the tools to adopt to the kernel
behaviour change, but I think we'd better change the kernel code to keep the
behavior consistent.
After this change, the mount information will be displayed the same with the
behavior in kernel-4.19, for example:
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
Fixes: d2935de7e4fd ("vfs: Convert bpf to use the new mount API")
Suggested-by: Daniel Borkmann <[email protected]>
Signed-off-by: Yafang Shao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Cc: David Howells <[email protected]>
Cc: Al Viro <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/inode.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/kernel/bpf/inode.c
+++ b/kernel/bpf/inode.c
@@ -648,12 +648,22 @@ static int bpf_parse_param(struct fs_con
int opt;
opt = fs_parse(fc, bpf_fs_parameters, param, &result);
- if (opt < 0)
+ if (opt < 0) {
/* We might like to report bad mount options here, but
* traditionally we've ignored all mount options, so we'd
* better continue to ignore non-existing options for bpf.
*/
- return opt == -ENOPARAM ? 0 : opt;
+ if (opt == -ENOPARAM) {
+ opt = vfs_parse_fs_param_source(fc, param);
+ if (opt != -ENOPARAM)
+ return opt;
+
+ return 0;
+ }
+
+ if (opt < 0)
+ return opt;
+ }
switch (opt) {
case OPT_MODE:
From: Tobias Waldekranz <[email protected]>
commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream.
As reported by sparse: In the remove path, the driver would attempt to
unmap its own priv pointer - instead of the io memory that it mapped
in probe.
Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver")
Signed-off-by: Tobias Waldekranz <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/xgmac_mdio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -332,9 +332,10 @@ err_ioremap:
static int xgmac_mdio_remove(struct platform_device *pdev)
{
struct mii_bus *bus = platform_get_drvdata(pdev);
+ struct mdio_fsl_priv *priv = bus->priv;
mdiobus_unregister(bus);
- iounmap(bus->priv);
+ iounmap(priv->mdio_base);
mdiobus_free(bus);
return 0;
From: Luiz Augusto von Dentz <[email protected]>
commit f16a491c65d9eb19398b25aefc10c2d3313d17b3 upstream.
10bbffa3e88e attempted to fix the use of rotation duration as
advertising duration but it didn't change the if condition which still
uses the duration instead of the timeout.
Fixes: 10bbffa3e88e ("Bluetooth: Fix using advertising instance duration as timeout")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bluetooth/hci_request.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -2318,7 +2318,7 @@ int __hci_req_enable_ext_advertising(str
/* Set duration per instance since controller is responsible for
* scheduling it.
*/
- if (adv_instance && adv_instance->duration) {
+ if (adv_instance && adv_instance->timeout) {
u16 duration = adv_instance->timeout * MSEC_PER_SEC;
/* Time = N * 10 ms */
From: Eli Cohen <[email protected]>
commit 97143b70aa847f2b0a1f959dde126b76ff7b5376 upstream.
Remove overriding of virtio_version_1_0 which forced the virtqueue
object to version 1.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Acked-by: Jason Wang <[email protected]>
Reviewed-by: Si-Wei Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -873,8 +873,6 @@ static int create_virtqueue(struct mlx5_
MLX5_SET(virtio_q, vq_ctx, umem_3_id, mvq->umem3.id);
MLX5_SET(virtio_q, vq_ctx, umem_3_size, mvq->umem3.size);
MLX5_SET(virtio_q, vq_ctx, pd, ndev->mvdev.res.pdn);
- if (MLX5_CAP_DEV_VDPA_EMULATION(ndev->mvdev.mdev, eth_frame_offload_type))
- MLX5_SET(virtio_q, vq_ctx, virtio_version_1_0, 1);
err = mlx5_cmd_exec(ndev->mvdev.mdev, in, inlen, out, sizeof(out));
if (err)
From: Miaoqian Lin <[email protected]>
commit 0b39536cc699db6850c426db7f9cb45923de40c5 upstream.
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 76c47d1449fc ("gpio: mpc8xxx: Add ACPI support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpio-mpc8xxx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -388,8 +388,8 @@ static int mpc8xxx_probe(struct platform
}
mpc8xxx_gc->irqn = platform_get_irq(pdev, 0);
- if (!mpc8xxx_gc->irqn)
- return 0;
+ if (mpc8xxx_gc->irqn < 0)
+ return mpc8xxx_gc->irqn;
mpc8xxx_gc->irq = irq_domain_create_linear(fwnode,
MPC8XXX_GPIO_PINS,
From: Stephen Boyd <[email protected]>
commit 489a71964f9d74e697a12cd0ace20ed829eb1f93 upstream.
We don't want vendors to be enabling this part of the clk code and
shipping it to customers. Exposing the ability to change clk frequencies
and parents via debugfs is potentially damaging to the system if folks
don't know what they're doing. Emit a strong warning so that the message
is clear: don't enable this outside of development systems.
Fixes: 37215da5553e ("clk: Add support for setting clk_rate via debugfs")
Cc: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/clk.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3340,6 +3340,24 @@ static int __init clk_debug_init(void)
{
struct clk_core *core;
+#ifdef CLOCK_ALLOW_WRITE_DEBUGFS
+ pr_warn("\n");
+ pr_warn("********************************************************************\n");
+ pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");
+ pr_warn("** **\n");
+ pr_warn("** WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **\n");
+ pr_warn("** **\n");
+ pr_warn("** This means that this kernel is built to expose clk operations **\n");
+ pr_warn("** such as parent or rate setting, enabling, disabling, etc. **\n");
+ pr_warn("** to userspace, which may compromise security on your system. **\n");
+ pr_warn("** **\n");
+ pr_warn("** If you see this message and you are not debugging the **\n");
+ pr_warn("** kernel, report this immediately to your vendor! **\n");
+ pr_warn("** **\n");
+ pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");
+ pr_warn("********************************************************************\n");
+#endif
+
rootdir = debugfs_create_dir("clk", NULL);
debugfs_create_file("clk_summary", 0444, rootdir, &all_lists,
From: Michael S. Tsirkin <[email protected]>
commit 1861ba626ae9b98136f3e504208cdef6b29cd3ec upstream.
A recently added error path does not mark ring unused when exiting on
OOM, which will lead to BUG on the next entry in debug builds.
TODO: refactor code so we have START_USE and END_USE in the same function.
Fixes: fc6d70f40b3d ("virtio_ring: check desc == NULL when using indirect with packed")
Cc: "Xuan Zhuo" <[email protected]>
Cc: Jiasheng Jiang <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/virtio/virtio_ring.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -1197,8 +1197,10 @@ static inline int virtqueue_add_packed(s
if (virtqueue_use_indirect(_vq, total_sg)) {
err = virtqueue_add_indirect_packed(vq, sgs, total_sg, out_sgs,
in_sgs, data, gfp);
- if (err != -ENOMEM)
+ if (err != -ENOMEM) {
+ END_USE(vq);
return err;
+ }
/* fall back on direct */
}
From: Eric Dumazet <[email protected]>
commit 9d6d7f1cb67cdee15f1a0e85aacfb924e0e02435 upstream.
wait_for_unix_gc() reads unix_tot_inflight & gc_in_progress
without synchronization.
Adds READ_ONCE()/WRITE_ONCE() and their associated comments
to better document the intent.
BUG: KCSAN: data-race in unix_inflight / wait_for_unix_gc
write to 0xffffffff86e2b7c0 of 4 bytes by task 9380 on cpu 0:
unix_inflight+0x1e8/0x260 net/unix/scm.c:63
unix_attach_fds+0x10c/0x1e0 net/unix/scm.c:121
unix_scm_to_skb net/unix/af_unix.c:1674 [inline]
unix_dgram_sendmsg+0x679/0x16b0 net/unix/af_unix.c:1817
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffffffff86e2b7c0 of 4 bytes by task 9375 on cpu 1:
wait_for_unix_gc+0x24/0x160 net/unix/garbage.c:196
unix_dgram_sendmsg+0x8e/0x16b0 net/unix/af_unix.c:1772
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000002 -> 0x00000004
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 9375 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 9915672d4127 ("af_unix: limit unix_tot_inflight")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/unix/garbage.c | 14 +++++++++++---
net/unix/scm.c | 6 ++++--
2 files changed, 15 insertions(+), 5 deletions(-)
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -192,8 +192,11 @@ void wait_for_unix_gc(void)
{
/* If number of inflight sockets is insane,
* force a garbage collect right now.
+ * Paired with the WRITE_ONCE() in unix_inflight(),
+ * unix_notinflight() and gc_in_progress().
*/
- if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress)
+ if (READ_ONCE(unix_tot_inflight) > UNIX_INFLIGHT_TRIGGER_GC &&
+ !READ_ONCE(gc_in_progress))
unix_gc();
wait_event(unix_gc_wait, gc_in_progress == false);
}
@@ -213,7 +216,9 @@ void unix_gc(void)
if (gc_in_progress)
goto out;
- gc_in_progress = true;
+ /* Paired with READ_ONCE() in wait_for_unix_gc(). */
+ WRITE_ONCE(gc_in_progress, true);
+
/* First, select candidates for garbage collection. Only
* in-flight sockets are considered, and from those only ones
* which don't have any external reference.
@@ -299,7 +304,10 @@ void unix_gc(void)
/* All candidates should have been detached by now. */
BUG_ON(!list_empty(&gc_candidates));
- gc_in_progress = false;
+
+ /* Paired with READ_ONCE() in wait_for_unix_gc(). */
+ WRITE_ONCE(gc_in_progress, false);
+
wake_up(&unix_gc_wait);
out:
--- a/net/unix/scm.c
+++ b/net/unix/scm.c
@@ -60,7 +60,8 @@ void unix_inflight(struct user_struct *u
} else {
BUG_ON(list_empty(&u->link));
}
- unix_tot_inflight++;
+ /* Paired with READ_ONCE() in wait_for_unix_gc() */
+ WRITE_ONCE(unix_tot_inflight, unix_tot_inflight + 1);
}
user->unix_inflight++;
spin_unlock(&unix_gc_lock);
@@ -80,7 +81,8 @@ void unix_notinflight(struct user_struct
if (atomic_long_dec_and_test(&u->inflight))
list_del_init(&u->link);
- unix_tot_inflight--;
+ /* Paired with READ_ONCE() in wait_for_unix_gc() */
+ WRITE_ONCE(unix_tot_inflight, unix_tot_inflight - 1);
}
user->unix_inflight--;
spin_unlock(&unix_gc_lock);
From: Robert Hancock <[email protected]>
commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream.
The check for the number of available TX ring slots was off by 1 since a
slot is required for the skb header as well as each fragment. This could
result in overwriting a TX ring slot that was still in use.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -747,7 +747,7 @@ axienet_start_xmit(struct sk_buff *skb,
num_frag = skb_shinfo(skb)->nr_frags;
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
- if (axienet_check_tx_bd_space(lp, num_frag)) {
+ if (axienet_check_tx_bd_space(lp, num_frag + 1)) {
if (netif_queue_stopped(ndev))
return NETDEV_TX_BUSY;
@@ -757,7 +757,7 @@ axienet_start_xmit(struct sk_buff *skb,
smp_mb();
/* Space might have just been freed - check again */
- if (axienet_check_tx_bd_space(lp, num_frag))
+ if (axienet_check_tx_bd_space(lp, num_frag + 1))
return NETDEV_TX_BUSY;
netif_wake_queue(ndev);
From: Jens Axboe <[email protected]>
commit 46cdc45acb089c811d9a54fd50af33b96e5fae9d upstream.
A previous commit added this feature, but it inadvertently used the wrong
variable to show/store the setting from/to, victimized by copy/paste. Fix
it up so that the async_depth sysfs interface reads and writes from the
right setting.
Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215485
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/mq-deadline.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -811,7 +811,7 @@ SHOW_JIFFIES(deadline_read_expire_show,
SHOW_JIFFIES(deadline_write_expire_show, dd->fifo_expire[DD_WRITE]);
SHOW_INT(deadline_writes_starved_show, dd->writes_starved);
SHOW_INT(deadline_front_merges_show, dd->front_merges);
-SHOW_INT(deadline_async_depth_show, dd->front_merges);
+SHOW_INT(deadline_async_depth_show, dd->async_depth);
SHOW_INT(deadline_fifo_batch_show, dd->fifo_batch);
#undef SHOW_INT
#undef SHOW_JIFFIES
@@ -840,7 +840,7 @@ STORE_JIFFIES(deadline_read_expire_store
STORE_JIFFIES(deadline_write_expire_store, &dd->fifo_expire[DD_WRITE], 0, INT_MAX);
STORE_INT(deadline_writes_starved_store, &dd->writes_starved, INT_MIN, INT_MAX);
STORE_INT(deadline_front_merges_store, &dd->front_merges, 0, 1);
-STORE_INT(deadline_async_depth_store, &dd->front_merges, 1, INT_MAX);
+STORE_INT(deadline_async_depth_store, &dd->async_depth, 1, INT_MAX);
STORE_INT(deadline_fifo_batch_store, &dd->fifo_batch, 0, INT_MAX);
#undef STORE_FUNCTION
#undef STORE_INT
From: German Gomez <[email protected]>
commit 3606c0e1a1050d397ad759a62607e419fd8b0ccb upstream.
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes: ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <[email protected]>
Signed-off-by: German Gomez <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/evsel.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1047,6 +1047,17 @@ void __weak arch_evsel__set_sample_weigh
evsel__set_sample_bit(evsel, WEIGHT);
}
+static void evsel__set_default_freq_period(struct record_opts *opts,
+ struct perf_event_attr *attr)
+{
+ if (opts->freq) {
+ attr->freq = 1;
+ attr->sample_freq = opts->freq;
+ } else {
+ attr->sample_period = opts->default_interval;
+ }
+}
+
/*
* The enable_on_exec/disabled value strategy:
*
@@ -1113,14 +1124,12 @@ void evsel__config(struct evsel *evsel,
* We default some events to have a default interval. But keep
* it a weak assumption overridable by the user.
*/
- if (!attr->sample_period) {
- if (opts->freq) {
- attr->freq = 1;
- attr->sample_freq = opts->freq;
- } else {
- attr->sample_period = opts->default_interval;
- }
- }
+ if ((evsel->is_libpfm_event && !attr->sample_period) ||
+ (!evsel->is_libpfm_event && (!attr->sample_period ||
+ opts->user_freq != UINT_MAX ||
+ opts->user_interval != ULLONG_MAX)))
+ evsel__set_default_freq_period(opts, attr);
+
/*
* If attr->freq was set (here or earlier), ask for period
* to be sampled.
From: Miaoqian Lin <[email protected]>
commit 30fee1d7462a446ade399c0819717a830cbdca69 upstream.
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 4195926aedca ("gpio: Add support for IDT 79RC3243x GPIO controller")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpio-idt3243x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpio/gpio-idt3243x.c
+++ b/drivers/gpio/gpio-idt3243x.c
@@ -164,8 +164,8 @@ static int idt_gpio_probe(struct platfor
return PTR_ERR(ctrl->pic);
parent_irq = platform_get_irq(pdev, 0);
- if (!parent_irq)
- return -EINVAL;
+ if (parent_irq < 0)
+ return parent_irq;
girq = &ctrl->gc.irq;
girq->chip = &idt_gpio_irqchip;
From: Eric Dumazet <[email protected]>
commit d07418afea8f1d9896aaf9dc5ae47ac4f45b220c upstream.
net/ipv4/fib_semantics.c uses an hash table of 256 slots,
keyed by device ifindexes: fib_info_devhash[DEVINDEX_HASHSIZE]
Problem is that with network namespaces, devices tend
to use the same ifindex.
lo device for instance has a fixed ifindex of one,
for all network namespaces.
This means that hosts with thousands of netns spend
a lot of time looking at some hash buckets with thousands
of elements, notably at netns dismantle.
Simply add a per netns perturbation (net_hash_mix())
to spread elements more uniformely.
Also change fib_devindex_hashfn() to use more entropy.
Fixes: aa79e66eee5d ("net: Make ifindex generation per-net namespace")
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_semantics.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -29,6 +29,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/netlink.h>
+#include <linux/hash.h>
#include <net/arp.h>
#include <net/ip.h>
@@ -319,11 +320,15 @@ static inline int nh_comp(struct fib_inf
static inline unsigned int fib_devindex_hashfn(unsigned int val)
{
- unsigned int mask = DEVINDEX_HASHSIZE - 1;
+ return hash_32(val, DEVINDEX_HASHBITS);
+}
+
+static struct hlist_head *
+fib_info_devhash_bucket(const struct net_device *dev)
+{
+ u32 val = net_hash_mix(dev_net(dev)) ^ dev->ifindex;
- return (val ^
- (val >> DEVINDEX_HASHBITS) ^
- (val >> (DEVINDEX_HASHBITS * 2))) & mask;
+ return &fib_info_devhash[fib_devindex_hashfn(val)];
}
static unsigned int fib_info_hashfn_1(int init_val, u8 protocol, u8 scope,
@@ -433,12 +438,11 @@ int ip_fib_check_default(__be32 gw, stru
{
struct hlist_head *head;
struct fib_nh *nh;
- unsigned int hash;
spin_lock(&fib_info_lock);
- hash = fib_devindex_hashfn(dev->ifindex);
- head = &fib_info_devhash[hash];
+ head = fib_info_devhash_bucket(dev);
+
hlist_for_each_entry(nh, head, nh_hash) {
if (nh->fib_nh_dev == dev &&
nh->fib_nh_gw4 == gw &&
@@ -1607,12 +1611,10 @@ link_it:
} else {
change_nexthops(fi) {
struct hlist_head *head;
- unsigned int hash;
if (!nexthop_nh->fib_nh_dev)
continue;
- hash = fib_devindex_hashfn(nexthop_nh->fib_nh_dev->ifindex);
- head = &fib_info_devhash[hash];
+ head = fib_info_devhash_bucket(nexthop_nh->fib_nh_dev);
hlist_add_head(&nexthop_nh->nh_hash, head);
} endfor_nexthops(fi)
}
@@ -1964,8 +1966,7 @@ void fib_nhc_update_mtu(struct fib_nh_co
void fib_sync_mtu(struct net_device *dev, u32 orig_mtu)
{
- unsigned int hash = fib_devindex_hashfn(dev->ifindex);
- struct hlist_head *head = &fib_info_devhash[hash];
+ struct hlist_head *head = fib_info_devhash_bucket(dev);
struct fib_nh *nh;
hlist_for_each_entry(nh, head, nh_hash) {
@@ -1984,12 +1985,11 @@ void fib_sync_mtu(struct net_device *dev
*/
int fib_sync_down_dev(struct net_device *dev, unsigned long event, bool force)
{
- int ret = 0;
- int scope = RT_SCOPE_NOWHERE;
+ struct hlist_head *head = fib_info_devhash_bucket(dev);
struct fib_info *prev_fi = NULL;
- unsigned int hash = fib_devindex_hashfn(dev->ifindex);
- struct hlist_head *head = &fib_info_devhash[hash];
+ int scope = RT_SCOPE_NOWHERE;
struct fib_nh *nh;
+ int ret = 0;
if (force)
scope = -1;
@@ -2134,7 +2134,6 @@ out:
int fib_sync_up(struct net_device *dev, unsigned char nh_flags)
{
struct fib_info *prev_fi;
- unsigned int hash;
struct hlist_head *head;
struct fib_nh *nh;
int ret;
@@ -2150,8 +2149,7 @@ int fib_sync_up(struct net_device *dev,
}
prev_fi = NULL;
- hash = fib_devindex_hashfn(dev->ifindex);
- head = &fib_info_devhash[hash];
+ head = fib_info_devhash_bucket(dev);
ret = 0;
hlist_for_each_entry(nh, head, nh_hash) {
From: Kunihiko Hayashi <[email protected]>
commit 105a8c525675bb7d4d64871f9b2edf39460de881 upstream.
The variables src_addr and dst_addr handle DMA addresses, so these should
be declared as dma_addr_t.
Fixes: 667b9251440b ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver")
Signed-off-by: Kunihiko Hayashi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/uniphier-xdmac.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/dma/uniphier-xdmac.c
+++ b/drivers/dma/uniphier-xdmac.c
@@ -131,8 +131,9 @@ uniphier_xdmac_next_desc(struct uniphier
static void uniphier_xdmac_chan_start(struct uniphier_xdmac_chan *xc,
struct uniphier_xdmac_desc *xd)
{
- u32 src_mode, src_addr, src_width;
- u32 dst_mode, dst_addr, dst_width;
+ u32 src_mode, src_width;
+ u32 dst_mode, dst_width;
+ dma_addr_t src_addr, dst_addr;
u32 val, its, tnum;
enum dma_slave_buswidth buswidth;
From: Håkon Bugge <[email protected]>
commit 8d0d2b0f41b1b2add8a30dbd816051a964efa497 upstream.
The existing tests are a little hard to comprehend. Use
check_add_overflow() instead.
Fixes: 04ded1672402 ("RDMA/cma: Verify private data length")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Håkon Bugge <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/cma.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -4037,8 +4037,7 @@ static int cma_resolve_ib_udp(struct rdm
memset(&req, 0, sizeof req);
offset = cma_user_data_offset(id_priv);
- req.private_data_len = offset + conn_param->private_data_len;
- if (req.private_data_len < conn_param->private_data_len)
+ if (check_add_overflow(offset, conn_param->private_data_len, &req.private_data_len))
return -EINVAL;
if (req.private_data_len) {
@@ -4097,8 +4096,7 @@ static int cma_connect_ib(struct rdma_id
memset(&req, 0, sizeof req);
offset = cma_user_data_offset(id_priv);
- req.private_data_len = offset + conn_param->private_data_len;
- if (req.private_data_len < conn_param->private_data_len)
+ if (check_add_overflow(offset, conn_param->private_data_len, &req.private_data_len))
return -EINVAL;
if (req.private_data_len) {
From: Theodore Ts'o <[email protected]>
commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream.
We probably want to remove the indirect block to extents migration
feature after a deprecation window, but until then, let's fix a
potential data loss problem caused by the fact that we put the
tmp_inode on the orphan list. In the unlikely case where we crash and
do a journal recovery, the data blocks belonging to the inode being
migrated are also represented in the tmp_inode on the orphan list ---
and so its data blocks will get marked unallocated, and available for
reuse.
Instead, stop putting the tmp_inode on the oprhan list. So in the
case where we crash while migrating the inode, we'll leak an inode,
which is not a disaster. It will be easily fixed the next time we run
fsck, and it's better than potentially having blocks getting claimed
by two different files, and losing data as a result.
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Lukas Czerner <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/migrate.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -437,12 +437,12 @@ int ext4_ext_migrate(struct inode *inode
percpu_down_write(&sbi->s_writepages_rwsem);
/*
- * Worst case we can touch the allocation bitmaps, a bgd
- * block, and a block to link in the orphan list. We do need
- * need to worry about credits for modifying the quota inode.
+ * Worst case we can touch the allocation bitmaps and a block
+ * group descriptor block. We do need need to worry about
+ * credits for modifying the quota inode.
*/
handle = ext4_journal_start(inode, EXT4_HT_MIGRATE,
- 4 + EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb));
+ 3 + EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb));
if (IS_ERR(handle)) {
retval = PTR_ERR(handle);
@@ -463,10 +463,6 @@ int ext4_ext_migrate(struct inode *inode
* Use the correct seed for checksum (i.e. the seed from 'inode'). This
* is so that the metadata blocks will have the correct checksum after
* the migration.
- *
- * Note however that, if a crash occurs during the migration process,
- * the recovery process is broken because the tmp_inode checksums will
- * be wrong and the orphans cleanup will fail.
*/
ei = EXT4_I(inode);
EXT4_I(tmp_inode)->i_csum_seed = ei->i_csum_seed;
@@ -478,7 +474,6 @@ int ext4_ext_migrate(struct inode *inode
clear_nlink(tmp_inode);
ext4_ext_tree_init(handle, tmp_inode);
- ext4_orphan_add(handle, tmp_inode);
ext4_journal_stop(handle);
/*
@@ -503,12 +498,6 @@ int ext4_ext_migrate(struct inode *inode
handle = ext4_journal_start(inode, EXT4_HT_MIGRATE, 1);
if (IS_ERR(handle)) {
- /*
- * It is impossible to update on-disk structures without
- * a handle, so just rollback in-core changes and live other
- * work to orphan_list_cleanup()
- */
- ext4_orphan_del(NULL, tmp_inode);
retval = PTR_ERR(handle);
goto out_tmp_inode;
}
From: Amelie Delaunay <[email protected]>
commit e7f110889a87307fb0fed408a5dee1707796ca04 upstream.
This patch fixes STM32_MDMA_CTBR_TSEL_MASK, which is [5:0], not [7:0].
Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/stm32-mdma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/dma/stm32-mdma.c
+++ b/drivers/dma/stm32-mdma.c
@@ -184,7 +184,7 @@
#define STM32_MDMA_CTBR(x) (0x68 + 0x40 * (x))
#define STM32_MDMA_CTBR_DBUS BIT(17)
#define STM32_MDMA_CTBR_SBUS BIT(16)
-#define STM32_MDMA_CTBR_TSEL_MASK GENMASK(7, 0)
+#define STM32_MDMA_CTBR_TSEL_MASK GENMASK(5, 0)
#define STM32_MDMA_CTBR_TSEL(n) STM32_MDMA_SET(n, \
STM32_MDMA_CTBR_TSEL_MASK)
From: Maxime Ripard <[email protected]>
commit eeb6ab4639590130d25670204ab7b6011333d685 upstream.
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
In VC4, a number of users of that pointers have crept in over the years,
and the previous commits removed them all but the HVS channel a CRTC has
been assigned.
Let's move this channel in struct vc4_crtc at atomic_begin() time, drop
it from our private state structure, and remove our use of crtc->state
from our vblank handler entirely.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 4 ++--
drivers/gpu/drm/vc4/vc4_drv.h | 9 +++++++++
drivers/gpu/drm/vc4/vc4_hvs.c | 12 ++++++++++++
drivers/gpu/drm/vc4/vc4_txp.c | 1 +
4 files changed, 24 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -708,8 +708,7 @@ static void vc4_crtc_handle_page_flip(st
struct drm_crtc *crtc = &vc4_crtc->base;
struct drm_device *dev = crtc->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
- struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
- u32 chan = vc4_state->assigned_channel;
+ u32 chan = vc4_crtc->current_hvs_channel;
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
@@ -955,6 +954,7 @@ static const struct drm_crtc_funcs vc4_c
static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
.mode_valid = vc4_crtc_mode_valid,
.atomic_check = vc4_crtc_atomic_check,
+ .atomic_begin = vc4_hvs_atomic_begin,
.atomic_flush = vc4_hvs_atomic_flush,
.atomic_enable = vc4_crtc_atomic_enable,
.atomic_disable = vc4_crtc_atomic_disable,
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -514,6 +514,14 @@ struct vc4_crtc {
* handler to have access to that value.
*/
unsigned int current_dlist;
+
+ /**
+ * @current_hvs_channel: HVS channel currently assigned to the
+ * CRTC. Protected by @irq_lock, and copied in
+ * vc4_hvs_atomic_begin() for the CRTC interrupt handler to have
+ * access to that value.
+ */
+ unsigned int current_hvs_channel;
};
static inline struct vc4_crtc *
@@ -926,6 +934,7 @@ extern struct platform_driver vc4_hvs_dr
void vc4_hvs_stop_channel(struct drm_device *dev, unsigned int output);
int vc4_hvs_get_fifo_from_output(struct drm_device *dev, unsigned int output);
int vc4_hvs_atomic_check(struct drm_crtc *crtc, struct drm_atomic_state *state);
+void vc4_hvs_atomic_begin(struct drm_crtc *crtc, struct drm_atomic_state *state);
void vc4_hvs_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state);
void vc4_hvs_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_state *state);
void vc4_hvs_atomic_flush(struct drm_crtc *crtc, struct drm_atomic_state *state);
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -393,6 +393,18 @@ static void vc4_hvs_update_dlist(struct
spin_unlock_irqrestore(&vc4_crtc->irq_lock, flags);
}
+void vc4_hvs_atomic_begin(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+ unsigned long flags;
+
+ spin_lock_irqsave(&vc4_crtc->irq_lock, flags);
+ vc4_crtc->current_hvs_channel = vc4_state->assigned_channel;
+ spin_unlock_irqrestore(&vc4_crtc->irq_lock, flags);
+}
+
void vc4_hvs_atomic_enable(struct drm_crtc *crtc,
struct drm_atomic_state *state)
{
--- a/drivers/gpu/drm/vc4/vc4_txp.c
+++ b/drivers/gpu/drm/vc4/vc4_txp.c
@@ -435,6 +435,7 @@ static void vc4_txp_atomic_disable(struc
static const struct drm_crtc_helper_funcs vc4_txp_crtc_helper_funcs = {
.atomic_check = vc4_txp_atomic_check,
+ .atomic_begin = vc4_hvs_atomic_begin,
.atomic_flush = vc4_hvs_atomic_flush,
.atomic_enable = vc4_txp_atomic_enable,
.atomic_disable = vc4_txp_atomic_disable,
From: Sreekanth Reddy <[email protected]>
[ Upstream commit 243bcc8efdb1f44b1a1d415e6821a246714c68ce ]
Set reply queue depth of 1K for B0 and 4K for A0.
While freeing the segmented request queues use the actual queue depth that
is used while creating them.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpi3mr/mpi3mr.h | 3 ++-
drivers/scsi/mpi3mr/mpi3mr_fw.c | 4 +++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 9787b53a2b598..2cc42432bd0c0 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -79,7 +79,8 @@ extern int prot_mask;
/* Operational queue management definitions */
#define MPI3MR_OP_REQ_Q_QD 512
-#define MPI3MR_OP_REP_Q_QD 4096
+#define MPI3MR_OP_REP_Q_QD 1024
+#define MPI3MR_OP_REP_Q_QD4K 4096
#define MPI3MR_OP_REQ_Q_SEG_SIZE 4096
#define MPI3MR_OP_REP_Q_SEG_SIZE 4096
#define MPI3MR_MAX_SEG_LIST_SIZE 4096
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 4a8316c6bd41a..5af36c54cb596 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1278,7 +1278,7 @@ static void mpi3mr_free_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx)
mrioc->op_reply_qinfo[q_idx].q_segment_list = NULL;
}
} else
- size = mrioc->req_qinfo[q_idx].num_requests *
+ size = mrioc->req_qinfo[q_idx].segment_qd *
mrioc->facts.op_req_sz;
for (j = 0; j < mrioc->req_qinfo[q_idx].num_segments; j++) {
@@ -1565,6 +1565,8 @@ static int mpi3mr_create_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx)
reply_qid = qidx + 1;
op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD;
+ if (!mrioc->pdev->revision)
+ op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD4K;
op_reply_q->ci = 0;
op_reply_q->ephase = 1;
atomic_set(&op_reply_q->pend_ios, 0);
--
2.34.1
From: Eli Cohen <[email protected]>
commit 37e07e705888e4c3502f204e9c6785c9c2d6d86a upstream.
Restore ndev->cur_num_vqs to the original value in case change_num_qps()
fails.
Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Reviewed-by: Si-Wei Liu<[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1510,9 +1510,11 @@ static int change_num_qps(struct mlx5_vd
return 0;
clean_added:
- for (--i; i >= cur_qps; --i)
+ for (--i; i >= 2 * cur_qps; --i)
teardown_vq(ndev, &ndev->vqs[i]);
+ ndev->cur_num_vqs = 2 * cur_qps;
+
return err;
}
From: Guillaume Nault <[email protected]>
commit a915deaa9abe4fb3a440312c954253a6a733608e upstream.
Mask the ECN bits before calling ip_route_output_ports(). The tos
variable might be passed directly from an IPv4 header, so it may have
the last ECN bit set. This interferes with the route lookup process as
ip_route_output_key_hash() interpretes this bit specially (to restrict
the route scope).
Found by code inspection, compile tested only.
Fixes: 804c2f3e36ef ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()")
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c
+++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c
@@ -32,6 +32,7 @@
#include <linux/tcp.h>
#include <linux/ipv6.h>
+#include <net/inet_ecn.h>
#include <net/route.h>
#include <net/ip6_route.h>
@@ -99,7 +100,7 @@ cxgb_find_route(struct cxgb4_lld_info *l
rt = ip_route_output_ports(&init_net, &fl4, NULL, peer_ip, local_ip,
peer_port, local_port, IPPROTO_TCP,
- tos, 0);
+ tos & ~INET_ECN_MASK, 0);
if (IS_ERR(rt))
return NULL;
n = dst_neigh_lookup(&rt->dst, &peer_ip);
From: Tudor Ambarus <[email protected]>
commit 5edc24ac876a928f36f407a0fcdb33b94a3a210f upstream.
It is desirable to do the prints without the lock held if possible, so
move the print after the lock is released.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -473,10 +473,12 @@ static dma_cookie_t at_xdmac_tx_submit(s
spin_lock_irqsave(&atchan->lock, irqflags);
cookie = dma_cookie_assign(tx);
- dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
- __func__, atchan, desc);
list_add_tail(&desc->xfer_node, &atchan->xfers_list);
spin_unlock_irqrestore(&atchan->lock, irqflags);
+
+ dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
+ __func__, atchan, desc);
+
return cookie;
}
From: Bart Van Assche <[email protected]>
commit 3369046e54ca8f82e0cb17740643da2d80d3cfa8 upstream.
The SCSI debugfs code supports showing information about pending commands,
including translating SCSI command flags from numeric into text format.
Also convert the SCMD_LAST flag from numeric into text form.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8930a6c20791 ("scsi: core: add support for request batching")
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_debugfs.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/scsi_debugfs.c
+++ b/drivers/scsi/scsi_debugfs.c
@@ -9,6 +9,7 @@
static const char *const scsi_cmd_flags[] = {
SCSI_CMD_FLAG_NAME(TAGGED),
SCSI_CMD_FLAG_NAME(INITIALIZED),
+ SCSI_CMD_FLAG_NAME(LAST),
};
#undef SCSI_CMD_FLAG_NAME
From: Lukas Wunner <[email protected]>
[ Upstream commit 93a770b7e16772530196674ffc79bb13fa927dc6 ]
struct uart_port contains a cached copy of the Modem Control signals.
It is used to skip register writes in uart_update_mctrl() if the new
signal state equals the old signal state. It also avoids a register
read to obtain the current state of output signals.
When a uart_port is registered, uart_configure_port() changes signal
state but neglects to keep the cached copy in sync. That may cause
a subsequent register write to be incorrectly skipped. Fix it before
it trips somebody up.
This behavior has been present ever since the serial core was introduced
in 2002:
https://git.kernel.org/history/history/c/33c0d1b0c3eb
So far it was never an issue because the cached copy is initialized to 0
by kzalloc() and when uart_configure_port() is executed, at most DTR has
been set by uart_set_options() or sunsu_console_setup(). Therefore,
a stable designation seems unnecessary.
Signed-off-by: Lukas Wunner <[email protected]>
Link: https://lore.kernel.org/r/bceeaba030b028ed810272d55d5fc6f3656ddddb.1641129752.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/serial_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 61e3dd0222af1..9e7e624a6c9db 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2393,7 +2393,8 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
* We probably don't need a spinlock around this, but
*/
spin_lock_irqsave(&port->lock, flags);
- port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR);
+ port->mctrl &= TIOCM_DTR;
+ port->ops->set_mctrl(port, port->mctrl);
spin_unlock_irqrestore(&port->lock, flags);
/*
--
2.34.1
From: Dave Jiang <[email protected]>
commit 0f225705cf6536826318180831e18a74595efc8d upstream.
By the spec, wq size and group association is not changeable unless device
is disabled. Exclude clearing the shadow copy on wq disable/reset. This
allows wq type to be changed after disable to be re-enabled.
Move the size and group association to its own cleanup and only call it
during device disable.
Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device")
Reported-by: Lucas Van <[email protected]>
Tested-by: Lucas Van <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/163951291732.2987775.13576571320501115257.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/idxd/device.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -394,8 +394,6 @@ static void idxd_wq_disable_cleanup(stru
lockdep_assert_held(&wq->wq_lock);
memset(wq->wqcfg, 0, idxd->wqcfg_size);
wq->type = IDXD_WQT_NONE;
- wq->size = 0;
- wq->group = NULL;
wq->threshold = 0;
wq->priority = 0;
wq->ats_dis = 0;
@@ -404,6 +402,15 @@ static void idxd_wq_disable_cleanup(stru
memset(wq->name, 0, WQ_NAME_SIZE);
}
+static void idxd_wq_device_reset_cleanup(struct idxd_wq *wq)
+{
+ lockdep_assert_held(&wq->wq_lock);
+
+ idxd_wq_disable_cleanup(wq);
+ wq->size = 0;
+ wq->group = NULL;
+}
+
static void idxd_wq_ref_release(struct percpu_ref *ref)
{
struct idxd_wq *wq = container_of(ref, struct idxd_wq, wq_active);
@@ -711,6 +718,7 @@ static void idxd_device_wqs_clear_state(
if (wq->state == IDXD_WQ_ENABLED) {
idxd_wq_disable_cleanup(wq);
+ idxd_wq_device_reset_cleanup(wq);
wq->state = IDXD_WQ_DISABLED;
}
}
From: Markus Reichl <[email protected]>
commit 0bf3885324a8599e3af4c7379b8d4f621c9bbffa upstream.
On boards with LAN9514 and no preconfigured MAC address we don't get an
ip address from DHCP after commit a049a30fc27c ("net: usb: Correct PHY handling
of smsc95xx") anymore. Adding an explicit reset before starting the phy
fixes the issue.
[1]
https://lore.kernel.org/netdev/[email protected]/
From: Gabriel Hojda <[email protected]>
Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Gabriel Hojda <[email protected]>
Signed-off-by: Markus Reichl <[email protected]>
Tested-by: Alexander Stein <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/smsc95xx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1961,7 +1961,8 @@ static const struct driver_info smsc95xx
.bind = smsc95xx_bind,
.unbind = smsc95xx_unbind,
.link_reset = smsc95xx_link_reset,
- .reset = smsc95xx_start_phy,
+ .reset = smsc95xx_reset,
+ .check_connect = smsc95xx_start_phy,
.stop = smsc95xx_stop,
.rx_fixup = smsc95xx_rx_fixup,
.tx_fixup = smsc95xx_tx_fixup,
From: Johannes Berg <[email protected]>
commit 4b86366fdfbedec42f8f7ee037775f2839921d34 upstream.
This file is generated, we should ignore it.
Fixes: d8fb32f4790f ("um: Add support for host CPU flags and alignment")
Signed-off-by: Johannes Berg <[email protected]>
Acked-By: [email protected]
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/um/.gitignore | 1 +
1 file changed, 1 insertion(+)
--- a/arch/um/.gitignore
+++ b/arch/um/.gitignore
@@ -2,3 +2,4 @@
kernel/config.c
kernel/config.tmp
kernel/vmlinux.lds
+kernel/capflags.c
From: Uwe Kleine-König <[email protected]>
commit ed17b1914978eddb2b01f2d34577f1c82518c650 upstream.
It's possible to link against libopencsd_c_api without having
libstdc++.so available, only libstdc++.so.6.0.28 (or whatever version is
in use) needs to be available. The same holds true for libopencsd.so.
When -lstdc++ (or -lopencsd) is explicitly passed to the linker however
the .so file must be available.
So wrap adding the dependencies into a check for static linking that
actually requires adding them all. The same construct is already used
for some other tests in the same file to reduce dependencies in the
dynamic linking case.
Fixes: 573cf5c9a152 ("perf build: Add missing -lstdc++ when linking with libopencsd")
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Cc: Adrian Bunk <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Branislav Rankov <[email protected]>
Cc: Diederik de Haas <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/Makefile.config | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -143,7 +143,10 @@ FEATURE_CHECK_LDFLAGS-libcrypto = -lcryp
ifdef CSINCLUDES
LIBOPENCSD_CFLAGS := -I$(CSINCLUDES)
endif
-OPENCSDLIBS := -lopencsd_c_api -lopencsd -lstdc++
+OPENCSDLIBS := -lopencsd_c_api
+ifeq ($(findstring -static,${LDFLAGS}),-static)
+ OPENCSDLIBS += -lopencsd -lstdc++
+endif
ifdef CSLIBS
LIBOPENCSD_LDFLAGS := -L$(CSLIBS)
endif
From: Robert Hancock <[email protected]>
commit 2e5644b1bab2ccea9cfc7a9520af95b94eb0dbf1 upstream.
The previous timeout of 1ms was too short to handle some cases where the
core is reset just after the input clocks were started, which will
be introduced in an upcoming patch. Increase the timeout to 50ms. Also
simplify the reset timeout checking to use read_poll_timeout.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -496,7 +496,8 @@ static void axienet_setoptions(struct ne
static int __axienet_device_reset(struct axienet_local *lp)
{
- u32 timeout;
+ u32 value;
+ int ret;
/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
* process of Axi DMA takes a while to complete as all pending
@@ -506,15 +507,13 @@ static int __axienet_device_reset(struct
* they both reset the entire DMA core, so only one needs to be used.
*/
axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, XAXIDMA_CR_RESET_MASK);
- timeout = DELAY_OF_ONE_MILLISEC;
- while (axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET) &
- XAXIDMA_CR_RESET_MASK) {
- udelay(1);
- if (--timeout == 0) {
- netdev_err(lp->ndev, "%s: DMA reset timeout!\n",
- __func__);
- return -ETIMEDOUT;
- }
+ ret = read_poll_timeout(axienet_dma_in32, value,
+ !(value & XAXIDMA_CR_RESET_MASK),
+ DELAY_OF_ONE_MILLISEC, 50000, false, lp,
+ XAXIDMA_TX_CR_OFFSET);
+ if (ret) {
+ dev_err(lp->dev, "%s: DMA reset timeout!\n", __func__);
+ return ret;
}
return 0;
From: Eric Dumazet <[email protected]>
commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream.
When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.
Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.
[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
This will be fixed in a separate patch.
Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/net_namespace.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -164,8 +164,10 @@ static void ops_exit_list(const struct p
{
struct net *net;
if (ops->exit) {
- list_for_each_entry(net, net_exit_list, exit_list)
+ list_for_each_entry(net, net_exit_list, exit_list) {
ops->exit(net);
+ cond_resched();
+ }
}
if (ops->exit_batch)
ops->exit_batch(net_exit_list);
From: Robert Hancock <[email protected]>
commit 95978df6fa328df619c15312e65ece469c2be2d2 upstream.
This driver was missing some required memory barriers:
Use dma_rmb to ensure we see all updates to the descriptor after we see
that an entry has been completed.
Use wmb and rmb to avoid stale descriptor status between the TX path and
TX complete IRQ path.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -632,6 +632,8 @@ static int axienet_free_tx_chain(struct
if (nr_bds == -1 && !(status & XAXIDMA_BD_STS_COMPLETE_MASK))
break;
+ /* Ensure we see complete descriptor update */
+ dma_rmb();
phys = desc_get_phys_addr(lp, cur_p);
dma_unmap_single(ndev->dev.parent, phys,
(cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK),
@@ -645,8 +647,10 @@ static int axienet_free_tx_chain(struct
cur_p->app1 = 0;
cur_p->app2 = 0;
cur_p->app4 = 0;
- cur_p->status = 0;
cur_p->skb = NULL;
+ /* ensure our transmit path and device don't prematurely see status cleared */
+ wmb();
+ cur_p->status = 0;
if (sizep)
*sizep += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
@@ -704,6 +708,9 @@ static inline int axienet_check_tx_bd_sp
int num_frag)
{
struct axidma_bd *cur_p;
+
+ /* Ensure we see all descriptor updates from device or TX IRQ path */
+ rmb();
cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK)
return NETDEV_TX_BUSY;
@@ -843,6 +850,8 @@ static void axienet_recv(struct net_devi
tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+ /* Ensure we see complete descriptor update */
+ dma_rmb();
phys = desc_get_phys_addr(lp, cur_p);
dma_unmap_single(ndev->dev.parent, phys, lp->max_frm_size,
DMA_FROM_DEVICE);
From: David Heidelberg <[email protected]>
commit c41910f257a22dc406c60d8826b4a3b5398003a3 upstream.
These properties aren't documented nor implemented in the driver.
Drop them.
Fixes warnings as:
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml
...
arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml
...
Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: David Heidelberg <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 ---
1 file changed, 3 deletions(-)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -965,9 +965,6 @@
nvmem-cells = <&speedbin_efuse>;
nvmem-cell-names = "speed_bin";
- qcom,gpu-quirk-two-pass-use-wfi;
- qcom,gpu-quirk-fault-detect-mask;
-
operating-points-v2 = <&gpu_opp_table>;
status = "disabled";
From: Randy Dunlap <[email protected]>
commit b0ac702f3329cdc8a06dcaac73183d4b5a2b942d upstream.
Adjust the path of the ABI files for firewire.rst to prevent a
documentation build error. Prevents this problem:
Sphinx parallel build error:
docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path:
InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'.
Fixes: 2f4830ef96d2 ("FireWire: add driver-api Introduction section")
Signed-off-by: Randy Dunlap <[email protected]>
Tested-by: Akira Yokosawa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/driver-api/firewire.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/Documentation/driver-api/firewire.rst
+++ b/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via ex
Firewire char device data structures
====================================
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
:literal:
.. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
Firewire device probing and sysfs interfaces
============================================
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
:literal:
.. kernel-doc:: drivers/firewire/core-device.c
From: Claudiu Beznea <[email protected]>
commit f1131b9c23fb4a3540a774828ff49f421619f902 upstream.
On a setup with KSZ9131 and MACB drivers it happens on suspend path, from
time to time, that the PHY interrupt arrives after PHY and MACB were
suspended (PHY via genphy_suspend(), MACB via macb_suspend()). In this
case the phy_read() at the beginning of kszphy_handle_interrupt() will
fail (as MACB driver is suspended at this time) leading to phy_error()
being called and a stack trace being displayed on console. To solve this
.suspend/.resume functions for all KSZ devices implementing
.handle_interrupt were replaced with kszphy_suspend()/kszphy_resume()
which disable/enable interrupt before/after calling
genphy_suspend()/genphy_resume().
The fix has been adapted for all KSZ devices which implements
.handle_interrupt but it has been tested only on KSZ9131.
Fixes: 59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback")
Signed-off-by: Claudiu Beznea <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/micrel.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1547,8 +1547,8 @@ static struct phy_driver ksphy_driver[]
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8021,
.phy_id_mask = 0x00ffffff,
@@ -1562,8 +1562,8 @@ static struct phy_driver ksphy_driver[]
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8031,
.phy_id_mask = 0x00ffffff,
@@ -1577,8 +1577,8 @@ static struct phy_driver ksphy_driver[]
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8041,
.phy_id_mask = MICREL_PHY_ID_MASK,
@@ -1609,8 +1609,8 @@ static struct phy_driver ksphy_driver[]
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.name = "Micrel KSZ8051",
/* PHY_BASIC_FEATURES */
@@ -1623,8 +1623,8 @@ static struct phy_driver ksphy_driver[]
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
.match_phy_device = ksz8051_match_phy_device,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8001,
.name = "Micrel KSZ8001 or KS8721",
@@ -1638,8 +1638,8 @@ static struct phy_driver ksphy_driver[]
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8081,
.name = "Micrel KSZ8081 or KSZ8091",
@@ -1669,8 +1669,8 @@ static struct phy_driver ksphy_driver[]
.config_init = ksz8061_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
@@ -1685,8 +1685,8 @@ static struct phy_driver ksphy_driver[]
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
}, {
@@ -1704,7 +1704,7 @@ static struct phy_driver ksphy_driver[]
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
+ .suspend = kszphy_suspend,
.resume = kszphy_resume,
}, {
.phy_id = PHY_ID_LAN8814,
@@ -1732,7 +1732,7 @@ static struct phy_driver ksphy_driver[]
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
+ .suspend = kszphy_suspend,
.resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8873MLL,
From: Alexandre Ghiti <[email protected]>
commit 473dcf0ffc31ce1135cd10578e7e06698cf51f4a upstream.
Raw device interface was removed so remove all references to configs
related to it.
Fixes: 603e4922f1c8 ("remove the raw driver")
Signed-off-by: Alexandre Ghiti <[email protected]>
Acked-by: Arnd Bergmann <[email protected]> [arch/arm/configs]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/devices.txt | 8 +-------
arch/arm/configs/spear13xx_defconfig | 1 -
arch/arm/configs/spear3xx_defconfig | 1 -
arch/arm/configs/spear6xx_defconfig | 1 -
arch/powerpc/configs/pseries_defconfig | 1 -
5 files changed, 1 insertion(+), 11 deletions(-)
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -2339,13 +2339,7 @@
disks (see major number 3) except that the limit on
partitions is 31.
- 162 char Raw block device interface
- 0 = /dev/rawctl Raw I/O control device
- 1 = /dev/raw/raw1 First raw I/O device
- 2 = /dev/raw/raw2 Second raw I/O device
- ...
- max minor number of raw device is set by kernel config
- MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
+ 162 char Used for (now removed) raw block device interface
163 char
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -61,7 +61,6 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -41,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -36,7 +36,6 @@ CONFIG_INPUT_FF_MEMLESS=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -190,7 +190,6 @@ CONFIG_HVCS=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IBM_BSR=m
CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
CONFIG_I2C_CHARDEV=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
From: Zechuan Chen <[email protected]>
commit 4624f199327a704dd1069aca1c3cadb8f2a28c6f upstream.
Because of commit bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms
lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf
command eliminates the need to use the prefix "." at the symbol name.
But when the command "perf probe -a schedule" is executed on ppc64
ABIv1, it obtains two symbol address information through /proc/kallsyms,
for example:
cat /proc/kallsyms | grep -w schedule
c000000000657020 T .schedule
c000000000d4fdb8 D schedule
The symbol "D schedule" is not a function symbol, and perf will print:
"p:probe/schedule _text+13958584"Failed to write event: Invalid argument
Therefore, when searching symbols from map and adding probe point for
them, a symbol type check is added. If the type of symbol is not a
function, skip it.
Fixes: bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2")
Signed-off-by: Zechuan Chen <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jianlin Lv <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/probe-event.c | 3 +++
1 file changed, 3 insertions(+)
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -3083,6 +3083,9 @@ static int find_probe_trace_events_from_
for (j = 0; j < num_matched_functions; j++) {
sym = syms[j];
+ if (sym->type != STT_FUNC)
+ continue;
+
/* There can be duplicated symbols in the map */
for (i = 0; i < j; i++)
if (sym->start == syms[i]->start) {
From: Ping-Ke Shih <[email protected]>
[ Upstream commit 04be6d337d37400ad5b3d5f27ca87645ee5a18a3 ]
Some AP can possibly try non-standard VHT rate and mac80211 warns and drops
packets, and leads low TCP throughput.
Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2
WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021
Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11")
has added, mac80211 adds this support as well.
After this patch, throughput is good and iw can get the bitrate:
rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2
or
rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891
Reported-by: Goldwyn Rodrigues <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 1958e4d59b524..92ce173dd0c13 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4933,7 +4933,7 @@ void ieee80211_rx_list(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta,
goto drop;
break;
case RX_ENC_VHT:
- if (WARN_ONCE(status->rate_idx > 9 ||
+ if (WARN_ONCE(status->rate_idx > 11 ||
!status->nss ||
status->nss > 8,
"Rate marked as a VHT rate but data is invalid: MCS: %d, NSS: %d\n",
--
2.34.1
From: Russell King (Oracle) <[email protected]>
commit 5765cee119bf5a36c94d20eceb37c445508934be upstream.
Commit 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change
modules") unintetionally changed the semantics for high power modules
without the digital diagnostics monitoring. We repeatedly attempt to
read the power status from the non-existing 0xa2 address in a futile
hope this failure is temporary:
[ 8.856051] sfp sfp-eth3: module NTT 0000000000000000 rev 0000 sn 0000000000000000 dc 160408
[ 8.865843] mvpp2 f4000000.ethernet eth3: switched to inband/1000base-x link mode
[ 8.873469] sfp sfp-eth3: Failed to read EEPROM: -5
[ 8.983251] sfp sfp-eth3: Failed to read EEPROM: -5
[ 9.103250] sfp sfp-eth3: Failed to read EEPROM: -5
We previosuly assumed such modules were powered up in the correct mode,
continuing without further configuration as long as the required power
class was supported by the host.
Restore this behaviour, while preserving the intent of subsequent
patches to avoid the "Address Change Sequence not supported" warning
if we are not going to be accessing the DDM address.
Fixes: 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change modules")
Reported-by: 照山周一郎 <[email protected]>
Tested-by: 照山周一郎 <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/sfp.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1641,17 +1641,20 @@ static int sfp_sm_probe_for_phy(struct s
static int sfp_module_parse_power(struct sfp *sfp)
{
u32 power_mW = 1000;
+ bool supports_a2;
if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_POWER_DECL))
power_mW = 1500;
if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
power_mW = 2000;
+ supports_a2 = sfp->id.ext.sff8472_compliance !=
+ SFP_SFF8472_COMPLIANCE_NONE ||
+ sfp->id.ext.diagmon & SFP_DIAGMON_DDM;
+
if (power_mW > sfp->max_power_mW) {
/* Module power specification exceeds the allowed maximum. */
- if (sfp->id.ext.sff8472_compliance ==
- SFP_SFF8472_COMPLIANCE_NONE &&
- !(sfp->id.ext.diagmon & SFP_DIAGMON_DDM)) {
+ if (!supports_a2) {
/* The module appears not to implement bus address
* 0xa2, so assume that the module powers up in the
* indicated mode.
@@ -1668,11 +1671,25 @@ static int sfp_module_parse_power(struct
}
}
+ if (power_mW <= 1000) {
+ /* Modules below 1W do not require a power change sequence */
+ sfp->module_power_mW = power_mW;
+ return 0;
+ }
+
+ if (!supports_a2) {
+ /* The module power level is below the host maximum and the
+ * module appears not to implement bus address 0xa2, so assume
+ * that the module powers up in the indicated mode.
+ */
+ return 0;
+ }
+
/* If the module requires a higher power mode, but also requires
* an address change sequence, warn the user that the module may
* not be functional.
*/
- if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE && power_mW > 1000) {
+ if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE) {
dev_warn(sfp->dev,
"Address Change Sequence not supported but module requires %u.%uW, module may not be functional\n",
power_mW / 1000, (power_mW / 100) % 10);
From: Maxim Mikityanskiy <[email protected]>
commit de2d807b294d3d2ce5e59043ae2634016765d076 upstream.
The attach callback of struct Qdisc_ops is used by only a few qdiscs:
mq, mqprio and htb. qdisc_graft() contains the following logic
(pseudocode):
if (!qdisc->ops->attach) {
if (ingress)
do ingress stuff;
else
do egress stuff;
}
if (!ingress) {
...
if (qdisc->ops->attach)
qdisc->ops->attach(qdisc);
} else {
...
}
As we see, the attach callback is not called if the qdisc is being
attached to ingress (TC_H_INGRESS). That wasn't a problem for mq and
mqprio, since they contain a check that they are attached to TC_H_ROOT,
and they can't be attached to TC_H_INGRESS anyway.
However, the commit cited below added the attach callback to htb. It is
needed for the hardware offload, but in the non-offload mode it
simulates the "do egress stuff" part of the pseudocode above. The
problem is that when htb is attached to ingress, neither "do ingress
stuff" nor attach() is called. It results in an inconsistency, and the
following message is printed to dmesg:
unregister_netdevice: waiting for lo to become free. Usage count = 2
This commit addresses the issue by running "do ingress stuff" in the
ingress flow even in the attach callback is present, which is fine,
because attach isn't going to be called afterwards.
The bug was found by syzbot and reported by Eric.
Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reported-by: Eric Dumazet <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_api.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1062,7 +1062,7 @@ static int qdisc_graft(struct net_device
qdisc_offload_graft_root(dev, new, old, extack);
- if (new && new->ops->attach)
+ if (new && new->ops->attach && !ingress)
goto skip;
for (i = 0; i < num_q; i++) {
From: Nicolas Dichtel <[email protected]>
commit ec3bb890817e4398f2d46e12e2e205495b116be9 upstream.
When there is no policy configured on the system, the default policy is
checked in xfrm_route_forward. However, it was done with the wrong
direction (XFRM_POLICY_FWD instead of XFRM_POLICY_OUT).
The default policy for XFRM_POLICY_FWD was checked just before, with a call
to xfrm[46]_policy_check().
CC: [email protected]
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/xfrm.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1167,7 +1167,7 @@ static inline int xfrm_route_forward(str
{
struct net *net = dev_net(skb->dev);
- if (xfrm_default_allow(net, XFRM_POLICY_FWD))
+ if (xfrm_default_allow(net, XFRM_POLICY_OUT))
return !net->xfrm.policy_count[XFRM_POLICY_OUT] ||
(skb_dst(skb)->flags & DST_NOXFRM) ||
__xfrm_route_forward(skb, family);
From: Andrey Konovalov <[email protected]>
commit e073e5ef90298d2d6e5e7f04b545a0815e92110c upstream.
Make do_kmem_cache_size_bulk() destroy the cache it creates.
Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com
Fixes: 03a9349ac0e0 ("lib/test_meminit: add a kmem_cache_alloc_bulk() test")
Signed-off-by: Andrey Konovalov <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/test_meminit.c | 1 +
1 file changed, 1 insertion(+)
--- a/lib/test_meminit.c
+++ b/lib/test_meminit.c
@@ -337,6 +337,7 @@ static int __init do_kmem_cache_size_bul
if (num)
kmem_cache_free_bulk(c, num, objects);
}
+ kmem_cache_destroy(c);
*total_failures += fail;
return 1;
}
From: Maxime Ripard <[email protected]>
commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream.
Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.
However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.
Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.
Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Reviewed-by: Dave Stevenson <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1735,8 +1735,14 @@ static int vc4_hdmi_cec_adap_enable(stru
struct vc4_hdmi *vc4_hdmi = cec_get_drvdata(adap);
/* clock period in microseconds */
const u32 usecs = 1000000 / CEC_CLOCK_FREQ;
- u32 val = HDMI_READ(HDMI_CEC_CNTRL_5);
+ u32 val;
+ int ret;
+ ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+ if (ret)
+ return ret;
+
+ val = HDMI_READ(HDMI_CEC_CNTRL_5);
val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
@@ -1882,6 +1888,8 @@ static int vc4_hdmi_cec_init(struct vc4_
if (ret < 0)
goto err_remove_handlers;
+ pm_runtime_put(&vc4_hdmi->pdev->dev);
+
return 0;
err_remove_handlers:
From: Sergey Shtylyov <[email protected]>
commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream.
The driver neglects to check the result of platform_get_irq_optional()'s
call and blithely passes the negative error codes to devm_request_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL.
Stop calling devm_request_irq() with the invalid IRQ #s.
Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt")
Signed-off-by: Sergey Shtylyov <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3966,10 +3966,12 @@ static int bcmgenet_probe(struct platfor
/* Request the WOL interrupt and advertise suspend if available */
priv->wol_irq_disabled = true;
- err = devm_request_irq(&pdev->dev, priv->wol_irq, bcmgenet_wol_isr, 0,
- dev->name, priv);
- if (!err)
- device_set_wakeup_capable(&pdev->dev, 1);
+ if (priv->wol_irq > 0) {
+ err = devm_request_irq(&pdev->dev, priv->wol_irq,
+ bcmgenet_wol_isr, 0, dev->name, priv);
+ if (!err)
+ device_set_wakeup_capable(&pdev->dev, 1);
+ }
/* Set the needed headroom to account for any possible
* features enabling/disabling at runtime
From: Ulf Hansson <[email protected]>
[ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ]
The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.
In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.
To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.
Reported-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: H. Nikolaus Schaller <[email protected]>
Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/core/sdio.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 68edf7a615be5..5447c47157aa5 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -708,6 +708,8 @@ try_again:
if (host->ops->init_card)
host->ops->init_card(host, card);
+ card->ocr = ocr_card;
+
/*
* If the host and card support UHS-I mode request the card
* to switch to 1.8V signaling level. No 1.8v signalling if
@@ -820,7 +822,7 @@ try_again:
goto mismatch;
}
}
- card->ocr = ocr_card;
+
mmc_fixup_device(card, sdio_fixup_methods);
if (card->type == MMC_TYPE_SD_COMBO) {
--
2.34.1
From: Yixing Liu <[email protected]>
commit 39d5534b1302189c809e90641ffae8cbdc42a8fc upstream.
It is more general for ARM device drivers to use the device attribute to
map PCI BAR spaces.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Yixing Liu <[email protected]>
Signed-off-by: Wenpeng Liang <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/hw/hns/hns_roce_main.c
+++ b/drivers/infiniband/hw/hns/hns_roce_main.c
@@ -352,7 +352,7 @@ static int hns_roce_mmap(struct ib_ucont
return rdma_user_mmap_io(context, vma,
to_hr_ucontext(context)->uar.pfn,
PAGE_SIZE,
- pgprot_noncached(vma->vm_page_prot),
+ pgprot_device(vma->vm_page_prot),
NULL);
/* vm_pgoff: 1 -- TPTR */
From: Horatiu Vultur <[email protected]>
commit c0b7f7d7e0ad44f35745c01964b3fa2833e298cb upstream.
In the blamed commit, the call to the function
switchdev_bridge_port_offload was passing the wrong argument for
atomic_nb. It was ocelot_netdevice_nb instead of ocelot_swtchdev_nb.
This patch fixes this issue.
Fixes: 4e51bf44a03af6 ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: Horatiu Vultur <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mscc/ocelot_net.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mscc/ocelot_net.c
+++ b/drivers/net/ethernet/mscc/ocelot_net.c
@@ -1168,7 +1168,7 @@ static int ocelot_netdevice_bridge_join(
ocelot_port_bridge_join(ocelot, port, bridge);
err = switchdev_bridge_port_offload(brport_dev, dev, priv,
- &ocelot_netdevice_nb,
+ &ocelot_switchdev_nb,
&ocelot_switchdev_blocking_nb,
false, extack);
if (err)
@@ -1182,7 +1182,7 @@ static int ocelot_netdevice_bridge_join(
err_switchdev_sync:
switchdev_bridge_port_unoffload(brport_dev, priv,
- &ocelot_netdevice_nb,
+ &ocelot_switchdev_nb,
&ocelot_switchdev_blocking_nb);
err_switchdev_offload:
ocelot_port_bridge_leave(ocelot, port, bridge);
@@ -1195,7 +1195,7 @@ static void ocelot_netdevice_pre_bridge_
struct ocelot_port_private *priv = netdev_priv(dev);
switchdev_bridge_port_unoffload(brport_dev, priv,
- &ocelot_netdevice_nb,
+ &ocelot_switchdev_nb,
&ocelot_switchdev_blocking_nb);
}
From: Ard Biesheuvel <[email protected]>
commit 1771afd47430f5e95c9c3a2e3a8a63e67402d3fe upstream.
Both versions of the CPSW driver declare a CPSW_HEADROOM_NA macro that
takes NET_IP_ALIGN into account, but fail to use it appropriately when
storing incoming packets in memory. This results in the IPv4 source and
destination addresses to appear misaligned in memory, which causes
aligment faults that need to be fixed up in software.
So let's switch from CPSW_HEADROOM to CPSW_HEADROOM_NA where needed.
This gets rid of any alignment faults on the RX path on a Beaglebone
White.
Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support")
Cc: Grygorii Strashko <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ti/cpsw.c | 6 +++---
drivers/net/ethernet/ti/cpsw_new.c | 6 +++---
drivers/net/ethernet/ti/cpsw_priv.c | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -349,7 +349,7 @@ static void cpsw_rx_handler(void *token,
struct cpsw_common *cpsw = ndev_to_cpsw(xmeta->ndev);
int pkt_size = cpsw->rx_packet_max;
int ret = 0, port, ch = xmeta->ch;
- int headroom = CPSW_HEADROOM;
+ int headroom = CPSW_HEADROOM_NA;
struct net_device *ndev = xmeta->ndev;
struct cpsw_priv *priv;
struct page_pool *pool;
@@ -392,7 +392,7 @@ static void cpsw_rx_handler(void *token,
}
if (priv->xdp_prog) {
- int headroom = CPSW_HEADROOM, size = len;
+ int size = len;
xdp_init_buff(&xdp, PAGE_SIZE, &priv->xdp_rxq[ch]);
if (status & CPDMA_RX_VLAN_ENCAP) {
@@ -442,7 +442,7 @@ requeue:
xmeta->ndev = ndev;
xmeta->ch = ch;
- dma = page_pool_get_dma_addr(new_page) + CPSW_HEADROOM;
+ dma = page_pool_get_dma_addr(new_page) + CPSW_HEADROOM_NA;
ret = cpdma_chan_submit_mapped(cpsw->rxv[ch].ch, new_page, dma,
pkt_size, 0);
if (ret < 0) {
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -283,7 +283,7 @@ static void cpsw_rx_handler(void *token,
{
struct page *new_page, *page = token;
void *pa = page_address(page);
- int headroom = CPSW_HEADROOM;
+ int headroom = CPSW_HEADROOM_NA;
struct cpsw_meta_xdp *xmeta;
struct cpsw_common *cpsw;
struct net_device *ndev;
@@ -336,7 +336,7 @@ static void cpsw_rx_handler(void *token,
}
if (priv->xdp_prog) {
- int headroom = CPSW_HEADROOM, size = len;
+ int size = len;
xdp_init_buff(&xdp, PAGE_SIZE, &priv->xdp_rxq[ch]);
if (status & CPDMA_RX_VLAN_ENCAP) {
@@ -386,7 +386,7 @@ requeue:
xmeta->ndev = ndev;
xmeta->ch = ch;
- dma = page_pool_get_dma_addr(new_page) + CPSW_HEADROOM;
+ dma = page_pool_get_dma_addr(new_page) + CPSW_HEADROOM_NA;
ret = cpdma_chan_submit_mapped(cpsw->rxv[ch].ch, new_page, dma,
pkt_size, 0);
if (ret < 0) {
--- a/drivers/net/ethernet/ti/cpsw_priv.c
+++ b/drivers/net/ethernet/ti/cpsw_priv.c
@@ -1120,7 +1120,7 @@ int cpsw_fill_rx_channels(struct cpsw_pr
xmeta->ndev = priv->ndev;
xmeta->ch = ch;
- dma = page_pool_get_dma_addr(page) + CPSW_HEADROOM;
+ dma = page_pool_get_dma_addr(page) + CPSW_HEADROOM_NA;
ret = cpdma_chan_idle_submit_mapped(cpsw->rxv[ch].ch,
page, dma,
cpsw->rx_packet_max,
From: Zack Rusin <[email protected]>
commit bc701a28c74e78d7b5aa2b8628cb3608d4785d14 upstream.
Old versions of the svga device used to export virtual vram, handling of
which was optimized on top of transparent hugepages support. Only very
old devices (OpenGL 2.1 support and earlier) used this code and at this
point performance differences are negligible.
Because the code requires very old hardware versions to run it has
been largely untested and unused for a long time.
Furthermore removal of the ttm hugepages support in:
commit 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
broke the coherency mode in vmwgfx when running with hugepages.
Fixes: 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
Signed-off-by: Zack Rusin <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Christian König <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Reviewed-by: Maaz Mombasawala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 49d535d64d52945e2c874f380705675e20a02b6a)
Signed-off-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/Makefile | 1
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 8 -
drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 5
drivers/gpu/drm/vmwgfx/vmwgfx_thp.c | 184 ------------------------------------
4 files changed, 198 deletions(-)
delete mode 100644 drivers/gpu/drm/vmwgfx/vmwgfx_thp.c
--- a/drivers/gpu/drm/vmwgfx/Makefile
+++ b/drivers/gpu/drm/vmwgfx/Makefile
@@ -12,6 +12,5 @@ vmwgfx-y := vmwgfx_execbuf.o vmwgfx_gmr.
vmwgfx_devcaps.o ttm_object.o ttm_memory.o vmwgfx_system_manager.o
vmwgfx-$(CONFIG_DRM_FBDEV_EMULATION) += vmwgfx_fb.o
-vmwgfx-$(CONFIG_TRANSPARENT_HUGEPAGE) += vmwgfx_thp.o
obj-$(CONFIG_DRM_VMWGFX) := vmwgfx.o
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -707,23 +707,15 @@ static int vmw_dma_masks(struct vmw_priv
static int vmw_vram_manager_init(struct vmw_private *dev_priv)
{
int ret;
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
- ret = vmw_thp_init(dev_priv);
-#else
ret = ttm_range_man_init(&dev_priv->bdev, TTM_PL_VRAM, false,
dev_priv->vram_size >> PAGE_SHIFT);
-#endif
ttm_resource_manager_set_used(ttm_manager_type(&dev_priv->bdev, TTM_PL_VRAM), false);
return ret;
}
static void vmw_vram_manager_fini(struct vmw_private *dev_priv)
{
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
- vmw_thp_fini(dev_priv);
-#else
ttm_range_man_fini(&dev_priv->bdev, TTM_PL_VRAM);
-#endif
}
static int vmw_setup_pci_resources(struct vmw_private *dev,
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -1557,11 +1557,6 @@ void vmw_bo_dirty_unmap(struct vmw_buffe
vm_fault_t vmw_bo_vm_fault(struct vm_fault *vmf);
vm_fault_t vmw_bo_vm_mkwrite(struct vm_fault *vmf);
-/* Transparent hugepage support - vmwgfx_thp.c */
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-extern int vmw_thp_init(struct vmw_private *dev_priv);
-void vmw_thp_fini(struct vmw_private *dev_priv);
-#endif
/**
* VMW_DEBUG_KMS - Debug output for kernel mode-setting
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_thp.c
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Huge page-table-entry support for IO memory.
- *
- * Copyright (C) 2007-2019 Vmware, Inc. All rights reservedd.
- */
-#include "vmwgfx_drv.h"
-#include <drm/ttm/ttm_bo_driver.h>
-#include <drm/ttm/ttm_placement.h>
-#include <drm/ttm/ttm_range_manager.h>
-
-/**
- * struct vmw_thp_manager - Range manager implementing huge page alignment
- *
- * @manager: TTM resource manager.
- * @mm: The underlying range manager. Protected by @lock.
- * @lock: Manager lock.
- */
-struct vmw_thp_manager {
- struct ttm_resource_manager manager;
- struct drm_mm mm;
- spinlock_t lock;
-};
-
-static struct vmw_thp_manager *to_thp_manager(struct ttm_resource_manager *man)
-{
- return container_of(man, struct vmw_thp_manager, manager);
-}
-
-static const struct ttm_resource_manager_func vmw_thp_func;
-
-static int vmw_thp_insert_aligned(struct ttm_buffer_object *bo,
- struct drm_mm *mm, struct drm_mm_node *node,
- unsigned long align_pages,
- const struct ttm_place *place,
- struct ttm_resource *mem,
- unsigned long lpfn,
- enum drm_mm_insert_mode mode)
-{
- if (align_pages >= bo->page_alignment &&
- (!bo->page_alignment || align_pages % bo->page_alignment == 0)) {
- return drm_mm_insert_node_in_range(mm, node,
- mem->num_pages,
- align_pages, 0,
- place->fpfn, lpfn, mode);
- }
-
- return -ENOSPC;
-}
-
-static int vmw_thp_get_node(struct ttm_resource_manager *man,
- struct ttm_buffer_object *bo,
- const struct ttm_place *place,
- struct ttm_resource **res)
-{
- struct vmw_thp_manager *rman = to_thp_manager(man);
- struct drm_mm *mm = &rman->mm;
- struct ttm_range_mgr_node *node;
- unsigned long align_pages;
- unsigned long lpfn;
- enum drm_mm_insert_mode mode = DRM_MM_INSERT_BEST;
- int ret;
-
- node = kzalloc(struct_size(node, mm_nodes, 1), GFP_KERNEL);
- if (!node)
- return -ENOMEM;
-
- ttm_resource_init(bo, place, &node->base);
-
- lpfn = place->lpfn;
- if (!lpfn)
- lpfn = man->size;
-
- mode = DRM_MM_INSERT_BEST;
- if (place->flags & TTM_PL_FLAG_TOPDOWN)
- mode = DRM_MM_INSERT_HIGH;
-
- spin_lock(&rman->lock);
- if (IS_ENABLED(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)) {
- align_pages = (HPAGE_PUD_SIZE >> PAGE_SHIFT);
- if (node->base.num_pages >= align_pages) {
- ret = vmw_thp_insert_aligned(bo, mm, &node->mm_nodes[0],
- align_pages, place,
- &node->base, lpfn, mode);
- if (!ret)
- goto found_unlock;
- }
- }
-
- align_pages = (HPAGE_PMD_SIZE >> PAGE_SHIFT);
- if (node->base.num_pages >= align_pages) {
- ret = vmw_thp_insert_aligned(bo, mm, &node->mm_nodes[0],
- align_pages, place, &node->base,
- lpfn, mode);
- if (!ret)
- goto found_unlock;
- }
-
- ret = drm_mm_insert_node_in_range(mm, &node->mm_nodes[0],
- node->base.num_pages,
- bo->page_alignment, 0,
- place->fpfn, lpfn, mode);
-found_unlock:
- spin_unlock(&rman->lock);
-
- if (unlikely(ret)) {
- kfree(node);
- } else {
- node->base.start = node->mm_nodes[0].start;
- *res = &node->base;
- }
-
- return ret;
-}
-
-static void vmw_thp_put_node(struct ttm_resource_manager *man,
- struct ttm_resource *res)
-{
- struct ttm_range_mgr_node *node = to_ttm_range_mgr_node(res);
- struct vmw_thp_manager *rman = to_thp_manager(man);
-
- spin_lock(&rman->lock);
- drm_mm_remove_node(&node->mm_nodes[0]);
- spin_unlock(&rman->lock);
-
- kfree(node);
-}
-
-int vmw_thp_init(struct vmw_private *dev_priv)
-{
- struct vmw_thp_manager *rman;
-
- rman = kzalloc(sizeof(*rman), GFP_KERNEL);
- if (!rman)
- return -ENOMEM;
-
- ttm_resource_manager_init(&rman->manager,
- dev_priv->vram_size >> PAGE_SHIFT);
-
- rman->manager.func = &vmw_thp_func;
- drm_mm_init(&rman->mm, 0, rman->manager.size);
- spin_lock_init(&rman->lock);
-
- ttm_set_driver_manager(&dev_priv->bdev, TTM_PL_VRAM, &rman->manager);
- ttm_resource_manager_set_used(&rman->manager, true);
- return 0;
-}
-
-void vmw_thp_fini(struct vmw_private *dev_priv)
-{
- struct ttm_resource_manager *man = ttm_manager_type(&dev_priv->bdev, TTM_PL_VRAM);
- struct vmw_thp_manager *rman = to_thp_manager(man);
- struct drm_mm *mm = &rman->mm;
- int ret;
-
- ttm_resource_manager_set_used(man, false);
-
- ret = ttm_resource_manager_evict_all(&dev_priv->bdev, man);
- if (ret)
- return;
- spin_lock(&rman->lock);
- drm_mm_clean(mm);
- drm_mm_takedown(mm);
- spin_unlock(&rman->lock);
- ttm_resource_manager_cleanup(man);
- ttm_set_driver_manager(&dev_priv->bdev, TTM_PL_VRAM, NULL);
- kfree(rman);
-}
-
-static void vmw_thp_debug(struct ttm_resource_manager *man,
- struct drm_printer *printer)
-{
- struct vmw_thp_manager *rman = to_thp_manager(man);
-
- spin_lock(&rman->lock);
- drm_mm_print(&rman->mm, printer);
- spin_unlock(&rman->lock);
-}
-
-static const struct ttm_resource_manager_func vmw_thp_func = {
- .alloc = vmw_thp_get_node,
- .free = vmw_thp_put_node,
- .debug = vmw_thp_debug
-};
From: Eric Dumazet <[email protected]>
commit 0a6e6b3c7db6c34e3d149f09cd714972f8753e3f upstream.
In the past, free_fib_info() was supposed to be called
under RTNL protection.
This eventually was no longer the case.
Instead of enforcing RTNL it seems we simply can
move fib_info_cnt changes to occur when fib_info_lock
is held.
v2: David Laight suggested to update fib_info_cnt
only when an entry is added/deleted to/from the hash table,
as fib_info_cnt is used to make sure hash table size
is optimal.
BUG: KCSAN: data-race in fib_create_info / free_fib_info
write to 0xffffffff86e243a0 of 4 bytes by task 26429 on cpu 0:
fib_create_info+0xe78/0x3440 net/ipv4/fib_semantics.c:1428
fib_table_insert+0x148/0x10c0 net/ipv4/fib_trie.c:1224
fib_magic+0x195/0x1e0 net/ipv4/fib_frontend.c:1087
fib_add_ifaddr+0xd0/0x2e0 net/ipv4/fib_frontend.c:1109
fib_netdev_event+0x178/0x510 net/ipv4/fib_frontend.c:1466
notifier_call_chain kernel/notifier.c:83 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:391
__dev_notify_flags+0x1d3/0x3b0
dev_change_flags+0xa2/0xc0 net/core/dev.c:8872
do_setlink+0x810/0x2410 net/core/rtnetlink.c:2719
rtnl_group_changelink net/core/rtnetlink.c:3242 [inline]
__rtnl_newlink net/core/rtnetlink.c:3396 [inline]
rtnl_newlink+0xb10/0x13b0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2496
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x726/0x840 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffffffff86e243a0 of 4 bytes by task 31505 on cpu 1:
free_fib_info+0x35/0x80 net/ipv4/fib_semantics.c:252
fib_info_put include/net/ip_fib.h:575 [inline]
nsim_fib4_rt_destroy drivers/net/netdevsim/fib.c:294 [inline]
nsim_fib4_rt_replace drivers/net/netdevsim/fib.c:403 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:431 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x15ca/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
process_scheduled_works kernel/workqueue.c:2361 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2447
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x00000d2d -> 0x00000d2e
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 31505 Comm: kworker/1:21 Not tainted 5.16.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes: 48bb9eb47b27 ("netdevsim: fib: Add dummy implementation for FIB offload")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: David Laight <[email protected]>
Cc: Ido Schimmel <[email protected]>
Cc: Jiri Pirko <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_semantics.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -249,7 +249,6 @@ void free_fib_info(struct fib_info *fi)
pr_warn("Freeing alive fib_info %p\n", fi);
return;
}
- fib_info_cnt--;
call_rcu(&fi->rcu, free_fib_info_rcu);
}
@@ -260,6 +259,10 @@ void fib_release_info(struct fib_info *f
spin_lock_bh(&fib_info_lock);
if (fi && refcount_dec_and_test(&fi->fib_treeref)) {
hlist_del(&fi->fib_hash);
+
+ /* Paired with READ_ONCE() in fib_create_info(). */
+ WRITE_ONCE(fib_info_cnt, fib_info_cnt - 1);
+
if (fi->fib_prefsrc)
hlist_del(&fi->fib_lhash);
if (fi->nh) {
@@ -1430,7 +1433,9 @@ struct fib_info *fib_create_info(struct
#endif
err = -ENOBUFS;
- if (fib_info_cnt >= fib_info_hash_size) {
+
+ /* Paired with WRITE_ONCE() in fib_release_info() */
+ if (READ_ONCE(fib_info_cnt) >= fib_info_hash_size) {
unsigned int new_size = fib_info_hash_size << 1;
struct hlist_head *new_info_hash;
struct hlist_head *new_laddrhash;
@@ -1462,7 +1467,6 @@ struct fib_info *fib_create_info(struct
return ERR_PTR(err);
}
- fib_info_cnt++;
fi->fib_net = net;
fi->fib_protocol = cfg->fc_protocol;
fi->fib_scope = cfg->fc_scope;
@@ -1589,6 +1593,7 @@ link_it:
refcount_set(&fi->fib_treeref, 1);
refcount_set(&fi->fib_clntref, 1);
spin_lock_bh(&fib_info_lock);
+ fib_info_cnt++;
hlist_add_head(&fi->fib_hash,
&fib_info_hash[fib_info_hashfn(fi)]);
if (fi->fib_prefsrc) {
From: Randy Dunlap <[email protected]>
commit 09f4d1513267d0ab712f5d29e7bd136535748709 upstream.
Fix grammar/wording in the help text for MEDIA_TEST_SUPPORT.
Fixes: 4b32216adb01 ("media: split test drivers from platform directory")
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -141,10 +141,10 @@ config MEDIA_TEST_SUPPORT
prompt "Test drivers" if MEDIA_SUPPORT_FILTER
default y if !MEDIA_SUPPORT_FILTER
help
- Those drivers should not be used on production Kernels, but
- can be useful on debug ones. It enables several dummy drivers
- that simulate a real hardware. Very useful to test userspace
- applications and to validate if the subsystem core is doesn't
+ These drivers should not be used on production kernels, but
+ can be useful on debug ones. This option enables several dummy drivers
+ that simulate real hardware. Very useful to test userspace
+ applications and to validate if the subsystem core doesn't
have regressions.
Say Y if you want to use some virtual test driver.
From: Sakari Ailus <[email protected]>
commit a11174952205d082f1658fab4314f0caf706e0a8 upstream.
The data node reference documentation was missing a package that must
contain the property values, instead property name and multiple values
being present in a single package. This is not aligned with the _DSD
spec.
Fix it by adding the package for the values.
Also add the missing "reg" properties to two numbered nodes.
Fixes: b10134a3643d ("ACPI: property: Document hierarchical data extension references")
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/firmware-guide/acpi/dsd/data-node-references.rst | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ b/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
Referencing hierarchical data nodes
===================================
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
:Author: Sakari Ailus <[email protected]>
ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final
Name (NOD0, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
+ Package () { "reg", 0 },
Package () { "random-property", 3 },
}
})
Name (NOD1, Package() {
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
+ Package () { "reg", 1 },
Package () { "anothernode", "ANOD" },
}
})
@@ -74,7 +76,11 @@ the ANOD object which is also the final
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
- Package () { "reference", ^DEV0, "node@1", "anothernode" },
+ Package () {
+ "reference", Package () {
+ ^DEV0, "node@1", "anothernode"
+ }
+ },
}
})
}
From: Guillaume Nault <[email protected]>
commit 48d67543e01d73292e0bb66d3f10fc422e79e031 upstream.
Mask the ECN bits before calling mlx5e_route_lookup_ipv4_get(). The
tunnel key might have the last ECN bit set. This interferes with the
route lookup process as ip_route_output_key_hash() interpretes this bit
specially (to restrict the route scope).
Found by code inspection, compile tested only.
Fixes: c7b9038d8af6 ("net/mlx5e: TC preparation refactoring for routing update event")
Fixes: 9a941117fb76 ("net/mlx5e: Maximize ip tunnel key usage on the TC offloading path")
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
/* Copyright (c) 2018 Mellanox Technologies. */
+#include <net/inet_ecn.h>
#include <net/vxlan.h>
#include <net/gre.h>
#include <net/geneve.h>
@@ -229,7 +230,7 @@ int mlx5e_tc_tun_create_header_ipv4(stru
int err;
/* add the IP fields */
- attr.fl.fl4.flowi4_tos = tun_key->tos;
+ attr.fl.fl4.flowi4_tos = tun_key->tos & ~INET_ECN_MASK;
attr.fl.fl4.daddr = tun_key->u.ipv4.dst;
attr.fl.fl4.saddr = tun_key->u.ipv4.src;
attr.ttl = tun_key->ttl;
@@ -344,7 +345,7 @@ int mlx5e_tc_tun_update_header_ipv4(stru
int err;
/* add the IP fields */
- attr.fl.fl4.flowi4_tos = tun_key->tos;
+ attr.fl.fl4.flowi4_tos = tun_key->tos & ~INET_ECN_MASK;
attr.fl.fl4.daddr = tun_key->u.ipv4.dst;
attr.fl.fl4.saddr = tun_key->u.ipv4.src;
attr.ttl = tun_key->ttl;
From: Tudor Ambarus <[email protected]>
commit 18deddea9184b62941395889ff7659529c877326 upstream.
Since tx_submit can be called from a hard IRQ, xfers_list must be
protected with a lock to avoid concurency on the list's elements.
Since at_xdmac_handle_cyclic() is called from a tasklet, spin_lock_irq
is enough to protect from a hard IRQ.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1619,14 +1619,17 @@ static void at_xdmac_handle_cyclic(struc
struct at_xdmac_desc *desc;
struct dma_async_tx_descriptor *txd;
- if (!list_empty(&atchan->xfers_list)) {
- desc = list_first_entry(&atchan->xfers_list,
- struct at_xdmac_desc, xfer_node);
- txd = &desc->tx_dma_desc;
-
- if (txd->flags & DMA_PREP_INTERRUPT)
- dmaengine_desc_get_callback_invoke(txd, NULL);
+ spin_lock_irq(&atchan->lock);
+ if (list_empty(&atchan->xfers_list)) {
+ spin_unlock_irq(&atchan->lock);
+ return;
}
+ desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc,
+ xfer_node);
+ spin_unlock_irq(&atchan->lock);
+ txd = &desc->tx_dma_desc;
+ if (txd->flags & DMA_PREP_INTERRUPT)
+ dmaengine_desc_get_callback_invoke(txd, NULL);
}
static void at_xdmac_handle_error(struct at_xdmac_chan *atchan)
From: Tudor Ambarus <[email protected]>
commit e6af9b05bec63cd4d1de2a33968cd0be2a91282a upstream.
Cyclic channels must too call issue_pending in order to start a transfer.
Start the transfer in issue_pending regardless of the type of channel.
This wrongly worked before, because in the past the transfer was started
at tx_submit level when only a desc in the transfer list.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1778,11 +1778,9 @@ static void at_xdmac_issue_pending(struc
dev_dbg(chan2dev(&atchan->chan), "%s\n", __func__);
- if (!at_xdmac_chan_is_cyclic(atchan)) {
- spin_lock_irqsave(&atchan->lock, flags);
- at_xdmac_advance_work(atchan);
- spin_unlock_irqrestore(&atchan->lock, flags);
- }
+ spin_lock_irqsave(&atchan->lock, flags);
+ at_xdmac_advance_work(atchan);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return;
}
From: Geert Uytterhoeven <[email protected]>
commit 53ef07326ad0d6ae7fefded22bc53b427d542761 upstream.
It does not make sense to have an (empty) chosen node in an SoC-specific
.dtsi, as chosen is meant for system-specific configuration.
It is already provided in microchip-mpfs-icicle-kit.dts anyway.
Fixes: 0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Tested-by: Conor Dooley <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 3 ---
1 file changed, 3 deletions(-)
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -9,9 +9,6 @@
model = "Microchip PolarFire SoC";
compatible = "microchip,mpfs";
- chosen {
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
From: Hyeong-Jun Kim <[email protected]>
commit 7377e853967ba45bf409e3b5536624d2cbc99f21 upstream.
There is a potential deadlock between writeback process and a process
performing write_begin() or write_cache_pages() while trying to write
same compress file, but not compressable, as below:
[Process A] - doing checkpoint
[Process B] [Process C]
f2fs_write_cache_pages()
- lock_page() [all pages in cluster, 0-31]
- f2fs_write_multi_pages()
- f2fs_write_raw_pages()
- f2fs_write_single_data_page()
- f2fs_do_write_data_page()
- return -EAGAIN [f2fs_trylock_op() failed]
- unlock_page(page) [e.g., page 0]
- generic_perform_write()
- f2fs_write_begin()
- f2fs_prepare_compress_overwrite()
- prepare_compress_overwrite()
- lock_page() [e.g., page 0]
- lock_page() [e.g., page 1]
- lock_page(page) [e.g., page 0]
Since there is no compress process, it is no longer necessary to hold
locks on every pages in cluster within f2fs_write_raw_pages().
This patch changes f2fs_write_raw_pages() to release all locks first
and then perform write same as the non-compress file in
f2fs_write_cache_pages().
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Hyeong-Jun Kim <[email protected]>
Signed-off-by: Sungjong Seo <[email protected]>
Signed-off-by: Youngjin Gil <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/compress.c | 50 ++++++++++++++++++++++----------------------------
1 file changed, 22 insertions(+), 28 deletions(-)
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -1448,25 +1448,38 @@ static int f2fs_write_raw_pages(struct c
enum iostat_type io_type)
{
struct address_space *mapping = cc->inode->i_mapping;
- int _submitted, compr_blocks, ret;
- int i = -1, err = 0;
+ int _submitted, compr_blocks, ret, i;
compr_blocks = f2fs_compressed_blocks(cc);
- if (compr_blocks < 0) {
- err = compr_blocks;
- goto out_err;
+
+ for (i = 0; i < cc->cluster_size; i++) {
+ if (!cc->rpages[i])
+ continue;
+
+ redirty_page_for_writepage(wbc, cc->rpages[i]);
+ unlock_page(cc->rpages[i]);
}
+ if (compr_blocks < 0)
+ return compr_blocks;
+
for (i = 0; i < cc->cluster_size; i++) {
if (!cc->rpages[i])
continue;
retry_write:
+ lock_page(cc->rpages[i]);
+
if (cc->rpages[i]->mapping != mapping) {
+continue_unlock:
unlock_page(cc->rpages[i]);
continue;
}
- BUG_ON(!PageLocked(cc->rpages[i]));
+ if (!PageDirty(cc->rpages[i]))
+ goto continue_unlock;
+
+ if (!clear_page_dirty_for_io(cc->rpages[i]))
+ goto continue_unlock;
ret = f2fs_write_single_data_page(cc->rpages[i], &_submitted,
NULL, NULL, wbc, io_type,
@@ -1481,26 +1494,15 @@ retry_write:
* avoid deadlock caused by cluster update race
* from foreground operation.
*/
- if (IS_NOQUOTA(cc->inode)) {
- err = 0;
- goto out_err;
- }
+ if (IS_NOQUOTA(cc->inode))
+ return 0;
ret = 0;
cond_resched();
congestion_wait(BLK_RW_ASYNC,
DEFAULT_IO_TIMEOUT);
- lock_page(cc->rpages[i]);
-
- if (!PageDirty(cc->rpages[i])) {
- unlock_page(cc->rpages[i]);
- continue;
- }
-
- clear_page_dirty_for_io(cc->rpages[i]);
goto retry_write;
}
- err = ret;
- goto out_err;
+ return ret;
}
*submitted += _submitted;
@@ -1509,14 +1511,6 @@ retry_write:
f2fs_balance_fs(F2FS_M_SB(mapping), true);
return 0;
-out_err:
- for (++i; i < cc->cluster_size; i++) {
- if (!cc->rpages[i])
- continue;
- redirty_page_for_writepage(wbc, cc->rpages[i]);
- unlock_page(cc->rpages[i]);
- }
- return err;
}
int f2fs_write_multi_pages(struct compress_ctx *cc,
From: Fengnan Chang <[email protected]>
commit d1917865a7906baf6b687e15e8e6195a295a3992 upstream.
Since compress inode not a regular file, generic_error_remove_page in
f2fs_invalidate_compress_pages will always be failed, set compress
inode as a regular file to fix it.
Fixes: 6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Fengnan Chang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/inode.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -516,6 +516,11 @@ make_now:
} else if (ino == F2FS_COMPRESS_INO(sbi)) {
#ifdef CONFIG_F2FS_FS_COMPRESSION
inode->i_mapping->a_ops = &f2fs_compress_aops;
+ /*
+ * generic_error_remove_page only truncates pages of regular
+ * inode
+ */
+ inode->i_mode |= S_IFREG;
#endif
mapping_set_gfp_mask(inode->i_mapping,
GFP_NOFS | __GFP_HIGHMEM | __GFP_MOVABLE);
From: Mike Leach <[email protected]>
commit 66bd1333abd7fa191f13b929c9119d6cd3df27b0 upstream.
Fix the description of the directories and attributes used
in cs_etm as used by perf.
Drop the references to the 'configurations' sub-directory which
had been removed in an earlier version of the patchset.
Fixes: f71cd93d5ea4 ("Documentation: coresight: Add documentation for CoreSight config")
Reported-by: German Gomex <[email protected]>
Signed-off-by: Mike Leach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/trace/coresight/coresight-config.rst | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
--- a/Documentation/trace/coresight/coresight-config.rst
+++ b/Documentation/trace/coresight/coresight-config.rst
@@ -211,19 +211,13 @@ also declared in the perf 'cs_etm' event
be selected when running trace under perf::
$ ls /sys/devices/cs_etm
- configurations format perf_event_mux_interval_ms sinks type
- events nr_addr_filters power
+ cpu0 cpu2 events nr_addr_filters power subsystem uevent
+ cpu1 cpu3 format perf_event_mux_interval_ms sinks type
-Key directories here are 'configurations' - which lists the loaded
-configurations, and 'events' - a generic perf directory which allows
-selection on the perf command line.::
+The key directory here is 'events' - a generic perf directory which allows
+selection on the perf command line. As with the sinks entries, this provides
+a hash of the configuration name.
- $ ls configurations/
- autofdo
- $ cat configurations/autofdo
- 0xa7c3dddd
-
-As with the sinks entries, this provides a hash of the configuration name.
The entry in the 'events' directory uses perfs built in syntax generator
to substitute the syntax for the name when evaluating the command::
From: Marcelo Tosatti <[email protected]>
commit 5f02ef741a785678930f3ff0a8b6b2b0ef1bb402 upstream.
blocked_vcpu_on_cpu_lock is taken from hard interrupt context
(pi_wakeup_handler), therefore it cannot sleep.
Switch it to a raw spinlock.
Fixes:
[41297.066254] BUG: scheduling while atomic: CPU 0/KVM/635218/0x00010001
[41297.066323] Preemption disabled at:
[41297.066324] [<ffffffff902ee47f>] irq_enter_rcu+0xf/0x60
[41297.066339] Call Trace:
[41297.066342] <IRQ>
[41297.066346] dump_stack_lvl+0x34/0x44
[41297.066353] ? irq_enter_rcu+0xf/0x60
[41297.066356] __schedule_bug.cold+0x7d/0x8b
[41297.066361] __schedule+0x439/0x5b0
[41297.066365] ? task_blocks_on_rt_mutex.constprop.0.isra.0+0x1b0/0x440
[41297.066369] schedule_rtlock+0x1e/0x40
[41297.066371] rtlock_slowlock_locked+0xf1/0x260
[41297.066374] rt_spin_lock+0x3b/0x60
[41297.066378] pi_wakeup_handler+0x31/0x90 [kvm_intel]
[41297.066388] sysvec_kvm_posted_intr_wakeup_ipi+0x9d/0xd0
[41297.066392] </IRQ>
[41297.066392] asm_sysvec_kvm_posted_intr_wakeup_ipi+0x12/0x20
...
Signed-off-by: Marcelo Tosatti <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/posted_intr.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/arch/x86/kvm/vmx/posted_intr.c
+++ b/arch/x86/kvm/vmx/posted_intr.c
@@ -15,7 +15,7 @@
* can find which vCPU should be waken up.
*/
static DEFINE_PER_CPU(struct list_head, blocked_vcpu_on_cpu);
-static DEFINE_PER_CPU(spinlock_t, blocked_vcpu_on_cpu_lock);
+static DEFINE_PER_CPU(raw_spinlock_t, blocked_vcpu_on_cpu_lock);
static inline struct pi_desc *vcpu_to_pi_desc(struct kvm_vcpu *vcpu)
{
@@ -121,9 +121,9 @@ static void __pi_post_block(struct kvm_v
new.control) != old.control);
if (!WARN_ON_ONCE(vcpu->pre_pcpu == -1)) {
- spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
+ raw_spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
list_del(&vcpu->blocked_vcpu_list);
- spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
+ raw_spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
vcpu->pre_pcpu = -1;
}
}
@@ -154,11 +154,11 @@ int pi_pre_block(struct kvm_vcpu *vcpu)
local_irq_disable();
if (!WARN_ON_ONCE(vcpu->pre_pcpu != -1)) {
vcpu->pre_pcpu = vcpu->cpu;
- spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
+ raw_spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
list_add_tail(&vcpu->blocked_vcpu_list,
&per_cpu(blocked_vcpu_on_cpu,
vcpu->pre_pcpu));
- spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
+ raw_spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
}
do {
@@ -215,7 +215,7 @@ void pi_wakeup_handler(void)
struct kvm_vcpu *vcpu;
int cpu = smp_processor_id();
- spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+ raw_spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
list_for_each_entry(vcpu, &per_cpu(blocked_vcpu_on_cpu, cpu),
blocked_vcpu_list) {
struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
@@ -223,13 +223,13 @@ void pi_wakeup_handler(void)
if (pi_test_on(pi_desc) == 1)
kvm_vcpu_kick(vcpu);
}
- spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+ raw_spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
}
void __init pi_init_cpu(int cpu)
{
INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
- spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+ raw_spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
}
bool pi_has_pending_interrupt(struct kvm_vcpu *vcpu)
From: Jakub Kicinski <[email protected]>
commit d480a26bdf872529919e7c30e17f79d0d7b8c4da upstream.
x86 AES-NI routines can deal with unaligned data. Crypto context
(key, iv etc.) have to be aligned but we take care of that separately
by copying it onto the stack. We were feeding unaligned data into
crypto routines up until commit 83c83e658863 ("crypto: aesni -
refactor scatterlist processing") switched to use the full
skcipher API which uses cra_alignmask to decide data alignment.
This fixes 21% performance regression in kTLS.
Tested by booting with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
(and running thru various kTLS packets).
CC: [email protected] # 5.15+
Fixes: 83c83e658863 ("crypto: aesni - refactor scatterlist processing")
Signed-off-by: Jakub Kicinski <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/crypto/aesni-intel_glue.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -1107,7 +1107,7 @@ static struct aead_alg aesni_aeads[] = {
.cra_flags = CRYPTO_ALG_INTERNAL,
.cra_blocksize = 1,
.cra_ctxsize = sizeof(struct aesni_rfc4106_gcm_ctx),
- .cra_alignmask = AESNI_ALIGN - 1,
+ .cra_alignmask = 0,
.cra_module = THIS_MODULE,
},
}, {
@@ -1124,7 +1124,7 @@ static struct aead_alg aesni_aeads[] = {
.cra_flags = CRYPTO_ALG_INTERNAL,
.cra_blocksize = 1,
.cra_ctxsize = sizeof(struct generic_gcmaes_ctx),
- .cra_alignmask = AESNI_ALIGN - 1,
+ .cra_alignmask = 0,
.cra_module = THIS_MODULE,
},
} };
From: Mateusz Jończyk <[email protected]>
commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream.
Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.
Use spin_lock_irq() like the rest of the function.
Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.
Signed-off-by: Mateusz Jończyk <[email protected]>
Reviewed-by: Nobuhiro Iwamatsu <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: [email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-cmos.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -457,7 +457,10 @@ static int cmos_set_alarm(struct device
min = t->time.tm_min;
sec = t->time.tm_sec;
+ spin_lock_irq(&rtc_lock);
rtc_control = CMOS_READ(RTC_CONTROL);
+ spin_unlock_irq(&rtc_lock);
+
if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
/* Writing 0xff means "don't care" or "match all". */
mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
From: Willy Tarreau <[email protected]>
commit ebbe0d8a449d183fa43b42d84fcb248e25303985 upstream.
After re-checking in the spec and comparing stack offsets with glibc,
The last pushed argument must be 16-byte aligned (i.e. aligned before the
call) so that in the callee esp+4 is multiple of 16, so the principle is
the 32-bit equivalent to what Ammar fixed for x86_64. It's possible that
32-bit code using SSE2 or MMX could have been affected. In addition the
frame pointer ought to be zero at the deepest level.
Link: https://gitlab.com/x86-psABIs/i386-ABI/-/wikis/Intel386-psABI
Cc: Ammar Faizi <[email protected]>
Cc: [email protected]
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/include/nolibc/nolibc.h | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/tools/include/nolibc/nolibc.h
+++ b/tools/include/nolibc/nolibc.h
@@ -583,13 +583,21 @@ struct sys_stat_struct {
})
/* startup code */
+/*
+ * i386 System V ABI mandates:
+ * 1) last pushed argument must be 16-byte aligned.
+ * 2) The deepest stack frame should be set to zero
+ *
+ */
asm(".section .text\n"
".global _start\n"
"_start:\n"
"pop %eax\n" // argc (first arg, %eax)
"mov %esp, %ebx\n" // argv[] (second arg, %ebx)
"lea 4(%ebx,%eax,4),%ecx\n" // then a NULL then envp (third arg, %ecx)
- "and $-16, %esp\n" // x86 ABI : esp must be 16-byte aligned when
+ "xor %ebp, %ebp\n" // zero the stack frame
+ "and $-16, %esp\n" // x86 ABI : esp must be 16-byte aligned before
+ "sub $4, %esp\n" // the call instruction (args are aligned)
"push %ecx\n" // push all registers on the stack so that we
"push %ebx\n" // support both regparm and plain stack modes
"push %eax\n"
From: Takashi Iwai <[email protected]>
commit 5576c4f24c56722a2d9fb9c447d896e5b312078b upstream.
Some weird devices set the codec SSID vendor ID 0, and
snd_pci_quirk_lookup_id() loop aborts at the point although it should
still try matching with the SSID device ID. This resulted in a
missing quirk for some old Macs.
Fix the loop termination condition to check both subvendor and
subdevice.
Fixes: 73355ddd8775 ("ALSA: hda: Code refactoring snd_hda_pick_fixup()")
Cc: <[email protected]>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215495
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/misc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/core/misc.c
+++ b/sound/core/misc.c
@@ -112,7 +112,7 @@ snd_pci_quirk_lookup_id(u16 vendor, u16
{
const struct snd_pci_quirk *q;
- for (q = list; q->subvendor; q++) {
+ for (q = list; q->subvendor || q->subdevice; q++) {
if (q->subvendor != vendor)
continue;
if (!q->subdevice ||
From: Namjae Jeon <[email protected]>
commit 914d7e5709ac59ded70bea7956d408fe2acd7c3c upstream.
Moves the credit charge deduction from total_credits under the processing
a request. When repeating smb2 lock request and other command request,
there will be a problem that ->total_credits does not decrease.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ksmbd/smb2misc.c | 7 ++-----
fs/ksmbd/smb2pdu.c | 16 ++++++++++------
2 files changed, 12 insertions(+), 11 deletions(-)
--- a/fs/ksmbd/smb2misc.c
+++ b/fs/ksmbd/smb2misc.c
@@ -290,7 +290,7 @@ static int smb2_validate_credit_charge(s
unsigned int req_len = 0, expect_resp_len = 0, calc_credit_num, max_len;
unsigned short credit_charge = le16_to_cpu(hdr->CreditCharge);
void *__hdr = hdr;
- int ret;
+ int ret = 0;
switch (hdr->Command) {
case SMB2_QUERY_INFO:
@@ -333,10 +333,7 @@ static int smb2_validate_credit_charge(s
}
spin_lock(&conn->credits_lock);
- if (credit_charge <= conn->total_credits) {
- conn->total_credits -= credit_charge;
- ret = 0;
- } else {
+ if (credit_charge > conn->total_credits) {
ksmbd_debug(SMB, "Insufficient credits granted, given: %u, granted: %u\n",
credit_charge, conn->total_credits);
ret = 1;
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -301,9 +301,8 @@ int smb2_set_rsp_credits(struct ksmbd_wo
struct smb2_hdr *req_hdr = ksmbd_req_buf_next(work);
struct smb2_hdr *hdr = ksmbd_resp_buf_next(work);
struct ksmbd_conn *conn = work->conn;
- unsigned short credits_requested;
+ unsigned short credits_requested, aux_max;
unsigned short credit_charge, credits_granted = 0;
- unsigned short aux_max, aux_credits;
if (work->send_no_response)
return 0;
@@ -318,6 +317,13 @@ int smb2_set_rsp_credits(struct ksmbd_wo
credit_charge = max_t(unsigned short,
le16_to_cpu(req_hdr->CreditCharge), 1);
+ if (credit_charge > conn->total_credits) {
+ ksmbd_debug(SMB, "Insufficient credits granted, given: %u, granted: %u\n",
+ credit_charge, conn->total_credits);
+ return -EINVAL;
+ }
+
+ conn->total_credits -= credit_charge;
credits_requested = max_t(unsigned short,
le16_to_cpu(req_hdr->CreditRequest), 1);
@@ -327,13 +333,11 @@ int smb2_set_rsp_credits(struct ksmbd_wo
* TODO: Need to adjuct CreditRequest value according to
* current cpu load
*/
- aux_credits = credits_requested - 1;
if (hdr->Command == SMB2_NEGOTIATE)
- aux_max = 0;
+ aux_max = 1;
else
aux_max = conn->vals->max_credits - credit_charge;
- aux_credits = min_t(unsigned short, aux_credits, aux_max);
- credits_granted = credit_charge + aux_credits;
+ credits_granted = min_t(unsigned short, credits_requested, aux_max);
if (conn->vals->max_credits - conn->total_credits < credits_granted)
credits_granted = conn->vals->max_credits -
From: Johan Hovold <[email protected]>
commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: [email protected] # 2.6.36
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/mceusb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1430,7 +1430,7 @@ static void mceusb_gen1_init(struct mceu
*/
ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
- data, USB_CTRL_MSG_SZ, HZ * 3);
+ data, USB_CTRL_MSG_SZ, 3000);
dev_dbg(dev, "set address - ret = %d", ret);
dev_dbg(dev, "set address - data[0] = %d, data[1] = %d",
data[0], data[1]);
@@ -1438,20 +1438,20 @@ static void mceusb_gen1_init(struct mceu
/* set feature: bit rate 38400 bps */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
- 0xc04e, 0x0000, NULL, 0, HZ * 3);
+ 0xc04e, 0x0000, NULL, 0, 3000);
dev_dbg(dev, "set feature - ret = %d", ret);
/* bRequest 4: set char length to 8 bits */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
4, USB_TYPE_VENDOR,
- 0x0808, 0x0000, NULL, 0, HZ * 3);
+ 0x0808, 0x0000, NULL, 0, 3000);
dev_dbg(dev, "set char length - retB = %d", ret);
/* bRequest 2: set handshaking to use DTR/DSR */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
2, USB_TYPE_VENDOR,
- 0x0000, 0x0100, NULL, 0, HZ * 3);
+ 0x0000, 0x0100, NULL, 0, 3000);
dev_dbg(dev, "set handshake - retC = %d", ret);
/* device resume */
From: Maxime Ripard <[email protected]>
[ Upstream commit 5517357a4733d7cf7c17fc79d0530cfa47add372 ]
The driver currently tries to pick the closest rate that is lower than
the rate being requested.
This causes an issue with clk_set_min_rate() since it actively checks
for the rounded rate to be above the minimum that was just set.
Let's change the logic a bit to pick the closest rate to the requested
rate, no matter if it's actually higher or lower.
Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection")
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]> # boot and basic functionality
Tested-by: Michael Stapelberg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/bcm/clk-bcm2835.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index a254512965eb8..bf97b2b2a63f8 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1216,7 +1216,7 @@ static int bcm2835_clock_determine_rate(struct clk_hw *hw,
rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate,
&div, &prate,
&avgrate);
- if (rate > best_rate && rate <= req->rate) {
+ if (abs(req->rate - rate) < abs(req->rate - best_rate)) {
best_parent = parent;
best_prate = prate;
best_rate = rate;
--
2.34.1
From: Baoquan He <[email protected]>
commit c4dc63f0032c77464fbd4e7a6afc22fa6913c4a7 upstream.
In kdump kernel of x86_64, page allocation failure is observed:
kworker/u2:2: page allocation failure: order:0, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 55 Comm: kworker/u2:2 Not tainted 5.16.0-rc4+ #5
Hardware name: AMD Dinar/Dinar, BIOS RDN1505B 06/05/2013
Workqueue: events_unbound async_run_entry_fn
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5e
warn_alloc.cold+0x72/0xd6
__alloc_pages_slowpath.constprop.0+0xc69/0xcd0
__alloc_pages+0x1df/0x210
new_slab+0x389/0x4d0
___slab_alloc+0x58f/0x770
__slab_alloc.constprop.0+0x4a/0x80
kmem_cache_alloc_trace+0x24b/0x2c0
sr_probe+0x1db/0x620
......
device_add+0x405/0x920
......
__scsi_add_device+0xe5/0x100
ata_scsi_scan_host+0x97/0x1d0
async_run_entry_fn+0x30/0x130
process_one_work+0x1e8/0x3c0
worker_thread+0x50/0x3b0
? rescuer_thread+0x350/0x350
kthread+0x16b/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Mem-Info:
......
The above failure happened when calling kmalloc() to allocate buffer with
GFP_DMA. It requests to allocate slab page from DMA zone while no managed
pages at all in there.
sr_probe()
--> get_capabilities()
--> buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
Because in the current kernel, dma-kmalloc will be created as long as
CONFIG_ZONE_DMA is enabled. However, kdump kernel of x86_64 doesn't have
managed pages on DMA zone since commit 6f599d84231f ("x86/kdump: Always
reserve the low 1M when the crashkernel option is specified"). The
failure can be always reproduced.
For now, let's mute the warning of allocation failure if requesting pages
from DMA zone while no managed pages.
[[email protected]: fix warning]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <[email protected]>
Acked-by: John Donnelly <[email protected]>
Reviewed-by: Hyeonggon Yoo <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Laight <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/page_alloc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4210,7 +4210,9 @@ void warn_alloc(gfp_t gfp_mask, nodemask
va_list args;
static DEFINE_RATELIMIT_STATE(nopage_rs, 10*HZ, 1);
- if ((gfp_mask & __GFP_NOWARN) || !__ratelimit(&nopage_rs))
+ if ((gfp_mask & __GFP_NOWARN) ||
+ !__ratelimit(&nopage_rs) ||
+ ((gfp_mask & __GFP_DMA) && !has_managed_dma()))
return;
va_start(args, fmt);
From: Dmitry Osipenko <[email protected]>
commit d210919dbdc8a82c676cc3e3c370b1802be63124 upstream.
DMA buffers of 2D/3D engines aren't mapped properly when
CONFIG_ARM_DMA_USE_IOMMU=y. The memory management code of Tegra DRM driver
has a longstanding overhaul overdue and it's not obvious where the problem
is in this case. Hence let's add back the old workaround which we already
had sometime before. It explicitly detaches DRM devices from the offending
implicit IOMMU domain. This fixes a completely broken 2d/3d drivers in
case of ARM32 multiplatform kernel config.
Cc: [email protected]
Fixes: fa6661b7aa0b ("drm/tegra: Optionally attach clients to the IOMMU")
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/tegra/drm.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -21,6 +21,10 @@
#include <drm/drm_prime.h>
#include <drm/drm_vblank.h>
+#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)
+#include <asm/dma-iommu.h>
+#endif
+
#include "dc.h"
#include "drm.h"
#include "gem.h"
@@ -936,6 +940,17 @@ int host1x_client_iommu_attach(struct ho
struct iommu_group *group = NULL;
int err;
+#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)
+ if (client->dev->archdata.mapping) {
+ struct dma_iommu_mapping *mapping =
+ to_dma_iommu_mapping(client->dev);
+ arm_iommu_detach_device(client->dev);
+ arm_iommu_release_mapping(mapping);
+
+ domain = iommu_get_domain_for_dev(client->dev);
+ }
+#endif
+
/*
* If the host1x client is already attached to an IOMMU domain that is
* not the shared IOMMU domain, don't try to attach it to a different
From: Maxime Ripard <[email protected]>
[ Upstream commit 8ca011ef4af48a7af7b15afd8a4a44039dd04cea ]
The driver, once it found a divider, tries to round it up by increasing
the least significant bit of the fractional part by one when the
round_up argument is set and there's a remainder.
However, since it increases the divider it will actually reduce the
clock rate below what we were asking for, leading to issues with
clk_set_min_rate() that will complain that our rounded clock rate is
below the minimum of the rate.
Since the dividers are fairly precise already, let's remove that part so
that we can have clk_set_min_rate() working.
This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round
up ability to the clock divisor").
Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor")
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]> # boot and basic functionality
Tested-by: Michael Stapelberg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/bcm/clk-bcm2835.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index bf97b2b2a63f8..3667b4d731e71 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -932,8 +932,7 @@ static int bcm2835_clock_is_on(struct clk_hw *hw)
static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
unsigned long rate,
- unsigned long parent_rate,
- bool round_up)
+ unsigned long parent_rate)
{
struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
const struct bcm2835_clock_data *data = clock->data;
@@ -945,10 +944,6 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
rem = do_div(temp, rate);
div = temp;
-
- /* Round up and mask off the unused bits */
- if (round_up && ((div & unused_frac_mask) != 0 || rem != 0))
- div += unused_frac_mask + 1;
div &= ~unused_frac_mask;
/* different clamping limits apply for a mash clock */
@@ -1079,7 +1074,7 @@ static int bcm2835_clock_set_rate(struct clk_hw *hw,
struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
struct bcm2835_cprman *cprman = clock->cprman;
const struct bcm2835_clock_data *data = clock->data;
- u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false);
+ u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
u32 ctl;
spin_lock(&cprman->regs_lock);
@@ -1130,7 +1125,7 @@ static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw,
if (!(BIT(parent_idx) & data->set_rate_parent)) {
*prate = clk_hw_get_rate(parent);
- *div = bcm2835_clock_choose_div(hw, rate, *prate, true);
+ *div = bcm2835_clock_choose_div(hw, rate, *prate);
*avgrate = bcm2835_clock_rate_from_divisor(clock, *prate, *div);
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 0f5251339eda7f7eb7bd4467607ae1d01b24e129 ]
If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.
Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Michael Stapelberg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 6b0700d0b408e..21510ae31a9ec 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -168,6 +168,8 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
bool connected = false;
+ WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
+
if (vc4_hdmi->hpd_gpio &&
gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) {
connected = true;
@@ -188,10 +190,12 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
}
}
+ pm_runtime_put(&vc4_hdmi->pdev->dev);
return connector_status_connected;
}
cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
+ pm_runtime_put(&vc4_hdmi->pdev->dev);
return connector_status_disconnected;
}
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 9c6e4f6ed1d61d5f46946e5c151ceb279eedadb1 ]
In the bind hook, we actually need the device to have the HSM clock
running during the final part of the display initialisation where we
reset the controller and initialise the CEC component.
Failing to do so will result in a complete, silent, hang of the CPU.
Fixes: 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Dave Stevenson <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 21510ae31a9ec..2087717f1cce9 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -2190,6 +2190,18 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
if (ret)
goto err_put_ddc;
+ /*
+ * We need to have the device powered up at this point to call
+ * our reset hook and for the CEC init.
+ */
+ ret = vc4_hdmi_runtime_resume(dev);
+ if (ret)
+ goto err_put_ddc;
+
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
if (vc4_hdmi->variant->reset)
vc4_hdmi->variant->reset(vc4_hdmi);
@@ -2201,8 +2213,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
}
- pm_runtime_enable(dev);
-
drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
drm_encoder_helper_add(encoder, &vc4_hdmi_encoder_helper_funcs);
@@ -2226,6 +2236,8 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4_hdmi_debugfs_regs,
vc4_hdmi);
+ pm_runtime_put_sync(dev);
+
return 0;
err_free_cec:
@@ -2236,6 +2248,7 @@ err_destroy_conn:
vc4_hdmi_connector_destroy(&vc4_hdmi->connector);
err_destroy_encoder:
drm_encoder_cleanup(encoder);
+ pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
err_put_ddc:
put_device(&vc4_hdmi->ddc->dev);
--
2.34.1
From: xinhui pan <[email protected]>
commit 781050b0a3164934857c300bb0bc291e38c26b6f upstream.
After we move BO to a new memory region, we should put it to
the new memory manager's lru list regardless we unlock the resv or not.
Cc: [email protected]
Reviewed-by: Christian König <[email protected]>
Signed-off-by: xinhui pan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/ttm/ttm_bo.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -724,6 +724,8 @@ int ttm_mem_evict_first(struct ttm_devic
ret = ttm_bo_evict(bo, ctx);
if (locked)
ttm_bo_unreserve(bo);
+ else
+ ttm_bo_move_to_lru_tail_unlocked(bo);
ttm_bo_put(bo);
return ret;
From: Brian Norris <[email protected]>
[ Upstream commit 5a614570172e1c9f59035d259dd735acd4f1c01b ]
Fix some error handling here noticed in review of other changes.
Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <[email protected]>
Reported-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.4.I8bb7a91ecc411d56bc155763faa15f289d7fc074@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index fa40801767191..0ed13d81fe606 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -943,7 +943,7 @@ static int dw_mipi_dsi_rockchip_bind(struct device *dev,
ret = clk_prepare_enable(dsi->grf_clk);
if (ret) {
DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
- goto out_pm_runtime;
+ goto out_pll_clk;
}
dw_mipi_dsi_rockchip_config(dsi);
@@ -955,17 +955,19 @@ static int dw_mipi_dsi_rockchip_bind(struct device *dev,
ret = rockchip_dsi_drm_create_encoder(dsi, drm_dev);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to create drm encoder\n");
- goto out_pm_runtime;
+ goto out_pll_clk;
}
ret = dw_mipi_dsi_bind(dsi->dmd, &dsi->encoder);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
- goto out_pm_runtime;
+ goto out_pll_clk;
}
return 0;
+out_pll_clk:
+ clk_disable_unprepare(dsi->pllref_clk);
out_pm_runtime:
pm_runtime_put(dsi->dev);
if (dsi->slave)
--
2.34.1
From: Benjamin Li <[email protected]>
[ Upstream commit cfdf6b19e750f7de8ae71a26932f63b52e3bf74c ]
The linear mapping between the BD rate field and the driver's 5GHz
legacy rates table (wcn_5ghz_rates) does not only apply for the latter
four rates -- it applies to all eight rates.
Fixes: 6ea131acea98 ("wcn36xx: Fix warning due to bad rate_idx")
Signed-off-by: Benjamin Li <[email protected]>
Tested-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index f76de106570d2..f33e7228a1010 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -237,7 +237,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
const struct wcn36xx_rate *rate;
struct ieee80211_hdr *hdr;
struct wcn36xx_rx_bd *bd;
- struct ieee80211_supported_band *sband;
u16 fc, sn;
/*
@@ -295,12 +294,11 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
status.enc_flags = rate->encoding_flags;
status.bw = rate->bw;
status.rate_idx = rate->mcs_or_legacy_index;
- sband = wcn->hw->wiphy->bands[status.band];
status.nss = 1;
if (status.band == NL80211_BAND_5GHZ &&
status.encoding == RX_ENC_LEGACY &&
- status.rate_idx >= sband->n_bitrates) {
+ status.rate_idx >= 4) {
/* no dsss rates in 5Ghz rates table */
status.rate_idx -= 4;
}
--
2.34.1
From: Johan Hovold <[email protected]>
commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family")
Cc: [email protected] # 2.6.16
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/em28xx/em28xx-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -89,7 +89,7 @@ int em28xx_read_reg_req_len(struct em28x
mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(udev, pipe, req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, dev->urb_buf, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, 1000);
if (ret < 0) {
em28xx_regdbg("(pipe 0x%08x): IN: %02x %02x %02x %02x %02x %02x %02x %02x failed with error %i\n",
pipe,
@@ -158,7 +158,7 @@ int em28xx_write_regs_req(struct em28xx
memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(udev, pipe, req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, dev->urb_buf, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, 1000);
mutex_unlock(&dev->ctrl_urb_lock);
if (ret < 0) {
From: Brian Norris <[email protected]>
[ Upstream commit 251888398753924059f3bb247a44153a2853137f ]
Our probe() function never enabled this clock, so we shouldn't disable
it if we fail to probe the bridge.
Noted by inspection.
Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.3.Ie8ceefb51ab6065a1151869b6fcda41a467d4d2c@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index a2262bee5aa47..b7eaffafbccbc 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -1397,14 +1397,10 @@ static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
if (ret != -EPROBE_DEFER)
DRM_DEV_ERROR(dev,
"Failed to probe dw_mipi_dsi: %d\n", ret);
- goto err_clkdisable;
+ return ret;
}
return 0;
-
-err_clkdisable:
- clk_disable_unprepare(dsi->pllref_clk);
- return ret;
}
static int dw_mipi_dsi_rockchip_remove(struct platform_device *pdev)
--
2.34.1
From: Johan Hovold <[email protected]>
commit 10729be03327f53258cb196362015ad5c6eabe02 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")
Cc: [email protected] # 2.6.17
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/cpia2/cpia2_usb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -550,7 +550,7 @@ static int write_packet(struct usb_devic
0, /* index */
buf, /* buffer */
size,
- HZ);
+ 1000);
kfree(buf);
return ret;
@@ -582,7 +582,7 @@ static int read_packet(struct usb_device
0, /* index */
buf, /* buffer */
size,
- HZ);
+ 1000);
if (ret >= 0)
memcpy(registers, buf, size);
From: Rameshkumar Sundaram <[email protected]>
[ Upstream commit 16a2c3d5406f95ef6139de52669c60a39443f5f7 ]
HTT_PPDU_STATS_CFG_PDEV_ID bit mask for target FW PPDU stats request message
was set as bit 8 to 15. Bit 8 is reserved for soc stats and pdev id starts from
bit 9. Hence change the bitmask as bit 9 to 15 and fill the proper pdev id in
the request message.
In commit 701e48a43e15 ("ath11k: add packet log support for QCA6390"), both
HTT_PPDU_STATS_CFG_PDEV_ID and pdev_mask were changed, but this pdev_mask
calculation is not valid for platforms which has multiple pdevs with 1 rxdma
per pdev, as this is writing same value(i.e. 2) for all pdevs. Hence fixed it
to consider pdev_idx as well, to make it compatible for both single and multi
pd cases.
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Tested on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1
Fixes: 701e48a43e15 ("ath11k: add packet log support for QCA6390")
Co-developed-by: Sathishkumar Muruganandam <[email protected]>
Signed-off-by: Sathishkumar Muruganandam <[email protected]>
Signed-off-by: Rameshkumar Sundaram <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/dp.h | 3 ++-
drivers/net/wireless/ath/ath11k/dp_tx.c | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp.h b/drivers/net/wireless/ath/ath11k/dp.h
index ee768ccce46e1..d3e50e34f23dd 100644
--- a/drivers/net/wireless/ath/ath11k/dp.h
+++ b/drivers/net/wireless/ath/ath11k/dp.h
@@ -515,7 +515,8 @@ struct htt_ppdu_stats_cfg_cmd {
} __packed;
#define HTT_PPDU_STATS_CFG_MSG_TYPE GENMASK(7, 0)
-#define HTT_PPDU_STATS_CFG_PDEV_ID GENMASK(15, 8)
+#define HTT_PPDU_STATS_CFG_SOC_STATS BIT(8)
+#define HTT_PPDU_STATS_CFG_PDEV_ID GENMASK(15, 9)
#define HTT_PPDU_STATS_CFG_TLV_TYPE_BITMASK GENMASK(31, 16)
enum htt_ppdu_stats_tag_type {
diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index 8bba5234f81fc..bb8744ccfa00c 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -895,7 +895,7 @@ int ath11k_dp_tx_htt_h2t_ppdu_stats_req(struct ath11k *ar, u32 mask)
cmd->msg = FIELD_PREP(HTT_PPDU_STATS_CFG_MSG_TYPE,
HTT_H2T_MSG_TYPE_PPDU_STATS_CFG);
- pdev_mask = 1 << (i + 1);
+ pdev_mask = 1 << (ar->pdev_idx + i);
cmd->msg |= FIELD_PREP(HTT_PPDU_STATS_CFG_PDEV_ID, pdev_mask);
cmd->msg |= FIELD_PREP(HTT_PPDU_STATS_CFG_TLV_TYPE_BITMASK, mask);
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 8f7b239ea8cfdc8e64c875ee417fed41431a1f37 ]
It's not enough to just free(map->inner_map), as inner_map itself can
have extra memory allocated, like map name.
Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Hengqi Chen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/libbpf.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 7145463a4a562..0ad29203cbfbf 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -8676,7 +8676,10 @@ int bpf_map__set_inner_map_fd(struct bpf_map *map, int fd)
pr_warn("error: inner_map_fd already specified\n");
return libbpf_err(-EINVAL);
}
- zfree(&map->inner_map);
+ if (map->inner_map) {
+ bpf_map__destroy(map->inner_map);
+ zfree(&map->inner_map);
+ }
map->inner_map_fd = fd;
return 0;
}
--
2.34.1
From: Jann Horn <[email protected]>
commit 4ea5763fb79ed89b3bdad455ebf3f33416a81624 upstream.
uhid has to run hid_add_device() from workqueue context while allowing
parallel use of the userspace API (which is protected with ->devlock).
But hid_add_device() can fail. Currently, that is handled by immediately
destroying the associated HID device, without using ->devlock - but if
there are concurrent requests from userspace, that's wrong and leads to
NULL dereferences and/or memory corruption (via use-after-free).
Fix it by leaving the HID device as-is in the worker. We can clean it up
later, either in the UHID_DESTROY command handler or in the ->release()
handler.
Cc: [email protected]
Fixes: 67f8ecc550b5 ("HID: uhid: fix timeout when probe races with IO")
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/uhid.c | 29 +++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
--- a/drivers/hid/uhid.c
+++ b/drivers/hid/uhid.c
@@ -28,11 +28,22 @@
struct uhid_device {
struct mutex devlock;
+
+ /* This flag tracks whether the HID device is usable for commands from
+ * userspace. The flag is already set before hid_add_device(), which
+ * runs in workqueue context, to allow hid_add_device() to communicate
+ * with userspace.
+ * However, if hid_add_device() fails, the flag is cleared without
+ * holding devlock.
+ * We guarantee that if @running changes from true to false while you're
+ * holding @devlock, it's still fine to access @hid.
+ */
bool running;
__u8 *rd_data;
uint rd_size;
+ /* When this is NULL, userspace may use UHID_CREATE/UHID_CREATE2. */
struct hid_device *hid;
struct uhid_event input_buf;
@@ -63,9 +74,18 @@ static void uhid_device_add_worker(struc
if (ret) {
hid_err(uhid->hid, "Cannot register HID device: error %d\n", ret);
- hid_destroy_device(uhid->hid);
- uhid->hid = NULL;
+ /* We used to call hid_destroy_device() here, but that's really
+ * messy to get right because we have to coordinate with
+ * concurrent writes from userspace that might be in the middle
+ * of using uhid->hid.
+ * Just leave uhid->hid as-is for now, and clean it up when
+ * userspace tries to close or reinitialize the uhid instance.
+ *
+ * However, we do have to clear the ->running flag and do a
+ * wakeup to make sure userspace knows that the device is gone.
+ */
uhid->running = false;
+ wake_up_interruptible(&uhid->report_wait);
}
}
@@ -474,7 +494,7 @@ static int uhid_dev_create2(struct uhid_
void *rd_data;
int ret;
- if (uhid->running)
+ if (uhid->hid)
return -EALREADY;
rd_size = ev->u.create2.rd_size;
@@ -556,7 +576,7 @@ static int uhid_dev_create(struct uhid_d
static int uhid_dev_destroy(struct uhid_device *uhid)
{
- if (!uhid->running)
+ if (!uhid->hid)
return -EINVAL;
uhid->running = false;
@@ -565,6 +585,7 @@ static int uhid_dev_destroy(struct uhid_
cancel_work_sync(&uhid->worker);
hid_destroy_device(uhid->hid);
+ uhid->hid = NULL;
kfree(uhid->rd_data);
return 0;
From: Maxime Ripard <[email protected]>
[ Upstream commit bca10db67bdaf15997a5a2a276e7aa9b6eea1393 ]
Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.
However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.
Let's make sure we have the HDMI controller properly powered while
disabling it.
Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 18f5009ce90e3..c0df11e5fcf2b 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -32,6 +32,7 @@
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
@@ -42,6 +43,7 @@
#include <drm/drm_vblank.h>
#include "vc4_drv.h"
+#include "vc4_hdmi.h"
#include "vc4_regs.h"
#define HVS_FIFO_LATENCY_PIX 6
@@ -496,8 +498,10 @@ int vc4_crtc_disable_at_boot(struct drm_crtc *crtc)
enum vc4_encoder_type encoder_type;
const struct vc4_pv_data *pv_data;
struct drm_encoder *encoder;
+ struct vc4_hdmi *vc4_hdmi;
unsigned encoder_sel;
int channel;
+ int ret;
if (!(of_device_is_compatible(vc4_crtc->pdev->dev.of_node,
"brcm,bcm2711-pixelvalve2") ||
@@ -525,7 +529,20 @@ int vc4_crtc_disable_at_boot(struct drm_crtc *crtc)
if (WARN_ON(!encoder))
return 0;
- return vc4_crtc_disable(crtc, encoder, NULL, channel);
+ vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+ ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = vc4_crtc_disable(crtc, encoder, NULL, channel);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
+ if (ret)
+ return ret;
+
+ return 0;
}
static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
--
2.34.1
From: Dillon Min <[email protected]>
[ Upstream commit c9ee220d76775e42f35d634479c978d9350077d3 ]
Since the type of parameter size is unsigned long,
it should printk by %lu, instead of %ld, fix it.
Fixes: 7952be9b6ece ("media: drivers/media/common/videobuf2: rename from videobuf")
Signed-off-by: Dillon Min <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/common/videobuf2/videobuf2-dma-contig.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
index be376f3011b68..f8c65b0401054 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
@@ -157,7 +157,7 @@ static void *vb2_dc_alloc(struct vb2_buffer *vb,
GFP_KERNEL | vb->vb2_queue->gfp_flags,
buf->attrs);
if (!buf->cookie) {
- dev_err(dev, "dma_alloc_coherent of size %ld failed\n", size);
+ dev_err(dev, "dma_alloc_coherent of size %lu failed\n", size);
kfree(buf);
return ERR_PTR(-ENOMEM);
}
@@ -204,9 +204,9 @@ static int vb2_dc_mmap(void *buf_priv, struct vm_area_struct *vma)
vma->vm_ops->open(vma);
- pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %ld\n",
- __func__, (unsigned long)buf->dma_addr, vma->vm_start,
- buf->size);
+ pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %lu\n",
+ __func__, (unsigned long)buf->dma_addr, vma->vm_start,
+ buf->size);
return 0;
}
--
2.34.1
From: Benjamin Li <[email protected]>
[ Upstream commit 8f1ba8b0ee2679f0b3d22d2a5c1bc70c436fd872 ]
An SMD capture from the downstream prima driver on WCN3680B shows the
following command sequence for connected scans:
- init_scan_req
- start_scan_req, channel 1
- end_scan_req, channel 1
- start_scan_req, channel 2
- ...
- end_scan_req, channel 3
- finish_scan_req
- init_scan_req
- start_scan_req, channel 4
- ...
- end_scan_req, channel 6
- finish_scan_req
- ...
- end_scan_req, channel 165
- finish_scan_req
Upstream currently never calls wcn36xx_smd_end_scan, and in some cases[1]
still sends finish_scan_req twice in a row or before init_scan_req. A
typical connected scan looks like this:
- init_scan_req
- start_scan_req, channel 1
- finish_scan_req
- init_scan_req
- start_scan_req, channel 2
- ...
- start_scan_req, channel 165
- finish_scan_req
- finish_scan_req
This patch cleans up scanning so that init/finish and start/end are always
paired together and correctly nested.
- init_scan_req
- start_scan_req, channel 1
- end_scan_req, channel 1
- finish_scan_req
- init_scan_req
- start_scan_req, channel 2
- end_scan_req, channel 2
- ...
- start_scan_req, channel 165
- end_scan_req, channel 165
- finish_scan_req
Note that upstream will not do batching of 3 active-probe scans before
returning to the operating channel, and this patch does not change that.
To match downstream in this aspect, adjust IEEE80211_PROBE_DELAY and/or
the 125ms max off-channel time in ieee80211_scan_state_decision.
[1]: commit d195d7aac09b ("wcn36xx: Ensure finish scan is not requested
before start scan") addressed one case of finish_scan_req being sent
without a preceding init_scan_req (the case of the operating channel
coinciding with the first scan channel); two other cases are:
1) if SW scan is started and aborted immediately, without scanning any
channels, we send a finish_scan_req without ever sending init_scan_req,
and
2) as SW scan logic always returns us to the operating channel before
calling wcn36xx_sw_scan_complete, finish_scan_req is always sent twice
at the end of a SW scan
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/main.c | 34 +++++++++++++++++-----
drivers/net/wireless/ath/wcn36xx/smd.c | 4 +++
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
3 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 5d82aca370a72..cf9e1396bd046 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -400,6 +400,7 @@ static void wcn36xx_change_opchannel(struct wcn36xx *wcn, int ch)
static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
{
struct wcn36xx *wcn = hw->priv;
+ int ret;
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac config changed 0x%08x\n", changed);
@@ -415,17 +416,31 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
* want to receive/transmit regular data packets, then
* simply stop the scan session and exit PS mode.
*/
- wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
- wcn->sw_scan_vif);
- wcn->sw_scan_channel = 0;
+ if (wcn->sw_scan_channel)
+ wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel);
+ if (wcn->sw_scan_init) {
+ wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
+ wcn->sw_scan_vif);
+ }
} else if (wcn->sw_scan) {
/* A scan is ongoing, do not change the operating
* channel, but start a scan session on the channel.
*/
- wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN,
- wcn->sw_scan_vif);
+ if (wcn->sw_scan_channel)
+ wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel);
+ if (!wcn->sw_scan_init) {
+ /* This can fail if we are unable to notify the
+ * operating channel.
+ */
+ ret = wcn36xx_smd_init_scan(wcn,
+ HAL_SYS_MODE_SCAN,
+ wcn->sw_scan_vif);
+ if (ret) {
+ mutex_unlock(&wcn->conf_mutex);
+ return -EIO;
+ }
+ }
wcn36xx_smd_start_scan(wcn, ch);
- wcn->sw_scan_channel = ch;
} else {
wcn36xx_change_opchannel(wcn, ch);
}
@@ -713,7 +728,12 @@ static void wcn36xx_sw_scan_complete(struct ieee80211_hw *hw,
struct wcn36xx *wcn = hw->priv;
/* ensure that any scan session is finished */
- wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN, wcn->sw_scan_vif);
+ if (wcn->sw_scan_channel)
+ wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel);
+ if (wcn->sw_scan_init) {
+ wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
+ wcn->sw_scan_vif);
+ }
wcn->sw_scan = false;
wcn->sw_scan_opchannel = 0;
}
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 70bffe3d87a12..6ac770d8271eb 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -721,6 +721,7 @@ int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode,
wcn36xx_err("hal_init_scan response failed err=%d\n", ret);
goto out;
}
+ wcn->sw_scan_init = true;
out:
mutex_unlock(&wcn->hal_mutex);
return ret;
@@ -751,6 +752,7 @@ int wcn36xx_smd_start_scan(struct wcn36xx *wcn, u8 scan_channel)
wcn36xx_err("hal_start_scan response failed err=%d\n", ret);
goto out;
}
+ wcn->sw_scan_channel = scan_channel;
out:
mutex_unlock(&wcn->hal_mutex);
return ret;
@@ -781,6 +783,7 @@ int wcn36xx_smd_end_scan(struct wcn36xx *wcn, u8 scan_channel)
wcn36xx_err("hal_end_scan response failed err=%d\n", ret);
goto out;
}
+ wcn->sw_scan_channel = 0;
out:
mutex_unlock(&wcn->hal_mutex);
return ret;
@@ -822,6 +825,7 @@ int wcn36xx_smd_finish_scan(struct wcn36xx *wcn,
wcn36xx_err("hal_finish_scan response failed err=%d\n", ret);
goto out;
}
+ wcn->sw_scan_init = false;
out:
mutex_unlock(&wcn->hal_mutex);
return ret;
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index e9560f35e9bcf..428546a6047f0 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -246,6 +246,7 @@ struct wcn36xx {
struct cfg80211_scan_request *scan_req;
bool sw_scan;
u8 sw_scan_opchannel;
+ bool sw_scan_init;
u8 sw_scan_channel;
struct ieee80211_vif *sw_scan_vif;
struct mutex scan_lock;
--
2.34.1
From: Namjae Jeon <[email protected]>
commit 41dbda16a0902798e732abc6599de256b9dc3b27 upstream.
Whenever new parameter is added to smb configuration, It is possible
to break the execution of the IPC daemon by mismatch size of
request/response. This patch tries to reserve space in ipc request/response
in advance to prevent that.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ksmbd/ksmbd_netlink.h | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/fs/ksmbd/ksmbd_netlink.h
+++ b/fs/ksmbd/ksmbd_netlink.h
@@ -104,6 +104,7 @@ struct ksmbd_startup_request {
*/
__u32 sub_auth[3]; /* Subauth value for Security ID */
__u32 smb2_max_credits; /* MAX credits */
+ __u32 reserved[128]; /* Reserved room */
__u32 ifc_list_sz; /* interfaces list size */
__s8 ____payload[];
};
@@ -114,7 +115,7 @@ struct ksmbd_startup_request {
* IPC request to shutdown ksmbd server.
*/
struct ksmbd_shutdown_request {
- __s32 reserved;
+ __s32 reserved[16];
};
/*
@@ -123,6 +124,7 @@ struct ksmbd_shutdown_request {
struct ksmbd_login_request {
__u32 handle;
__s8 account[KSMBD_REQ_MAX_ACCOUNT_NAME_SZ]; /* user account name */
+ __u32 reserved[16]; /* Reserved room */
};
/*
@@ -136,6 +138,7 @@ struct ksmbd_login_response {
__u16 status;
__u16 hash_sz; /* hash size */
__s8 hash[KSMBD_REQ_MAX_HASH_SZ]; /* password hash */
+ __u32 reserved[16]; /* Reserved room */
};
/*
@@ -144,6 +147,7 @@ struct ksmbd_login_response {
struct ksmbd_share_config_request {
__u32 handle;
__s8 share_name[KSMBD_REQ_MAX_SHARE_NAME]; /* share name */
+ __u32 reserved[16]; /* Reserved room */
};
/*
@@ -158,6 +162,7 @@ struct ksmbd_share_config_response {
__u16 force_directory_mode;
__u16 force_uid;
__u16 force_gid;
+ __u32 reserved[128]; /* Reserved room */
__u32 veto_list_sz;
__s8 ____payload[];
};
@@ -188,6 +193,7 @@ struct ksmbd_tree_connect_request {
__s8 account[KSMBD_REQ_MAX_ACCOUNT_NAME_SZ];
__s8 share[KSMBD_REQ_MAX_SHARE_NAME];
__s8 peer_addr[64];
+ __u32 reserved[16]; /* Reserved room */
};
/*
@@ -197,6 +203,7 @@ struct ksmbd_tree_connect_response {
__u32 handle;
__u16 status;
__u16 connection_flags;
+ __u32 reserved[16]; /* Reserved room */
};
/*
@@ -205,6 +212,7 @@ struct ksmbd_tree_connect_response {
struct ksmbd_tree_disconnect_request {
__u64 session_id; /* session id */
__u64 connect_id; /* tree connection id */
+ __u32 reserved[16]; /* Reserved room */
};
/*
@@ -213,6 +221,7 @@ struct ksmbd_tree_disconnect_request {
struct ksmbd_logout_request {
__s8 account[KSMBD_REQ_MAX_ACCOUNT_NAME_SZ]; /* user account name */
__u32 account_flags;
+ __u32 reserved[16]; /* Reserved room */
};
/*
From: Christophe Leroy <[email protected]>
commit bc93a22a19eb2b68a16ecf04cdf4b2ed65aaf398 upstream.
On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA
test leads to "Illegal instruction" failure.
Looking at the content of rodata_objcopy.o, we see that the
function content zeroes only:
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 00 00 00 00 .long 0x0
Add the contents flag in order to keep the content of the section
while renaming it.
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 4e 80 00 20 blr
Fixes: e9e08a07385e ("lkdtm: support llvm-objcopy")
Cc: [email protected]
Cc: Kees Cook <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/lkdtm/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/lkdtm/Makefile
+++ b/drivers/misc/lkdtm/Makefile
@@ -20,7 +20,7 @@ CFLAGS_REMOVE_rodata.o += $(CC_FLAGS_LT
OBJCOPYFLAGS :=
OBJCOPYFLAGS_rodata_objcopy.o := \
- --rename-section .noinstr.text=.rodata,alloc,readonly,load
+ --rename-section .noinstr.text=.rodata,alloc,readonly,load,contents
targets += rodata.o rodata_objcopy.o
$(obj)/rodata_objcopy.o: $(obj)/rodata.o FORCE
$(call if_changed,objcopy)
From: Lad Prabhakar <[email protected]>
[ Upstream commit 818fdfa89baac77a8df5a2c30f4fb798cc937aa0 ]
Make sure we return error in case devm_ioremap_resource() fails for dirmap
resource.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/renesas-rpc-if.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 77a011d5ff8c1..8618702233002 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -244,7 +244,7 @@ int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(rpc->dirmap))
- rpc->dirmap = NULL;
+ return PTR_ERR(rpc->dirmap);
rpc->size = resource_size(res);
rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
--
2.34.1
From: Karthikeyan Kathirvel <[email protected]>
[ Upstream commit 64bc3aa02ae78b1fcb1b850e0eb1f0622002bfaa ]
The ath11k driver is caching the information about RSN/WPA IE in the
configured beacon template. The cached information is used during
associations to figure out whether 4-way PKT/2-way GTK peer flags need to
be set or not.
But the code never cleared the state when no such IE was found. This can
for example happen when moving from an WPA/RSN to an open setup. The
(seemingly connected) peer was then not able to communicate over the
link because the firmware assumed a different (encryption enabled) state
for the peer.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: 01e34233c645 ("ath11k: fix wmi peer flags in peer assoc command")
Cc: Venkateswara Naralasetty <[email protected]>
Reported-by: Sven Eckelmann <[email protected]>
Signed-off-by: Karthikeyan Kathirvel <[email protected]>
[[email protected]: split into separate patches, clean up commit message]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index aac10740f5752..2df60c74809d3 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -767,11 +767,15 @@ static int ath11k_mac_setup_bcn_tmpl(struct ath11k_vif *arvif)
if (cfg80211_find_ie(WLAN_EID_RSN, ies, (skb_tail_pointer(bcn) - ies)))
arvif->rsnie_present = true;
+ else
+ arvif->rsnie_present = false;
if (cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
WLAN_OUI_TYPE_MICROSOFT_WPA,
ies, (skb_tail_pointer(bcn) - ies)))
arvif->wpaie_present = true;
+ else
+ arvif->wpaie_present = false;
ret = ath11k_wmi_bcn_tmpl(ar, arvif->vdev_id, &offs, bcn);
--
2.34.1
From: Alexander Aring <[email protected]>
[ Upstream commit 4c3d90570bcc2b338f70f61f01110268e281ca3c ]
In some cases kernel_getpeername() will held the socket lock which is
already held when the socket layer calls error_report() callback. Since
commit 9dfc685e0262 ("inet: remove races in inet{6}_getname()") this
problem becomes more likely because the socket lock will be held always.
You will see something like:
bob9-u5 login: [ 562.316860] BUG: spinlock recursion on CPU#7, swapper/7/0
[ 562.318562] lock: 0xffff8f2284720088, .magic: dead4ead, .owner: swapper/7/0, .owner_cpu: 7
[ 562.319522] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.15.0+ #135
[ 562.320346] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
[ 562.321277] Call Trace:
[ 562.321529] <IRQ>
[ 562.321734] dump_stack_lvl+0x33/0x42
[ 562.322282] do_raw_spin_lock+0x8b/0xc0
[ 562.322674] lock_sock_nested+0x1e/0x50
[ 562.323057] inet_getname+0x39/0x110
[ 562.323425] ? sock_def_readable+0x80/0x80
[ 562.323838] lowcomms_error_report+0x63/0x260 [dlm]
[ 562.324338] ? wait_for_completion_interruptible_timeout+0xd2/0x120
[ 562.324949] ? lock_timer_base+0x67/0x80
[ 562.325330] ? do_raw_spin_unlock+0x49/0xc0
[ 562.325735] ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 562.326218] ? del_timer+0x54/0x80
[ 562.326549] sk_error_report+0x12/0x70
[ 562.326919] tcp_validate_incoming+0x3c8/0x530
[ 562.327347] ? kvm_clock_read+0x14/0x30
[ 562.327718] ? ktime_get+0x3b/0xa0
[ 562.328055] tcp_rcv_established+0x121/0x660
[ 562.328466] tcp_v4_do_rcv+0x132/0x260
[ 562.328835] tcp_v4_rcv+0xcea/0xe20
[ 562.329173] ip_protocol_deliver_rcu+0x35/0x1f0
[ 562.329615] ip_local_deliver_finish+0x54/0x60
[ 562.330050] ip_local_deliver+0xf7/0x110
[ 562.330431] ? inet_rtm_getroute+0x211/0x840
[ 562.330848] ? ip_protocol_deliver_rcu+0x1f0/0x1f0
[ 562.331310] ip_rcv+0xe1/0xf0
[ 562.331603] ? ip_local_deliver+0x110/0x110
[ 562.332011] __netif_receive_skb_core+0x46a/0x1040
[ 562.332476] ? inet_gro_receive+0x263/0x2e0
[ 562.332885] __netif_receive_skb_list_core+0x13b/0x2c0
[ 562.333383] netif_receive_skb_list_internal+0x1c8/0x2f0
[ 562.333896] ? update_load_avg+0x7e/0x5e0
[ 562.334285] gro_normal_list.part.149+0x19/0x40
[ 562.334722] napi_complete_done+0x67/0x160
[ 562.335134] virtnet_poll+0x2ad/0x408 [virtio_net]
[ 562.335644] __napi_poll+0x28/0x140
[ 562.336012] net_rx_action+0x23d/0x300
[ 562.336414] __do_softirq+0xf2/0x2ea
[ 562.336803] irq_exit_rcu+0xc1/0xf0
[ 562.337173] common_interrupt+0xb9/0xd0
It is and was always forbidden to call kernel_getpeername() in context
of error_report(). To get rid of the problem we access the destination
address for the peer over the socket structure. While on it we fix to
print out the destination port of the inet socket.
Fixes: 1a31833d085a ("DLM: Replace nodeid_to_addr with kernel_getpeername")
Reported-by: Bob Peterson <[email protected]>
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lowcomms.c | 42 ++++++++++++++++++++----------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 8f715c620e1f8..7b1c5f05a988b 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -592,8 +592,8 @@ int dlm_lowcomms_nodes_set_mark(int nodeid, unsigned int mark)
static void lowcomms_error_report(struct sock *sk)
{
struct connection *con;
- struct sockaddr_storage saddr;
void (*orig_report)(struct sock *) = NULL;
+ struct inet_sock *inet;
read_lock_bh(&sk->sk_callback_lock);
con = sock2con(sk);
@@ -601,33 +601,31 @@ static void lowcomms_error_report(struct sock *sk)
goto out;
orig_report = listen_sock.sk_error_report;
- if (kernel_getpeername(sk->sk_socket, (struct sockaddr *)&saddr) < 0) {
- printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
- "sending to node %d, port %d, "
- "sk_err=%d/%d\n", dlm_our_nodeid(),
- con->nodeid, dlm_config.ci_tcp_port,
- sk->sk_err, sk->sk_err_soft);
- } else if (saddr.ss_family == AF_INET) {
- struct sockaddr_in *sin4 = (struct sockaddr_in *)&saddr;
+ inet = inet_sk(sk);
+ switch (sk->sk_family) {
+ case AF_INET:
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
- "sending to node %d at %pI4, port %d, "
+ "sending to node %d at %pI4, dport %d, "
"sk_err=%d/%d\n", dlm_our_nodeid(),
- con->nodeid, &sin4->sin_addr.s_addr,
- dlm_config.ci_tcp_port, sk->sk_err,
+ con->nodeid, &inet->inet_daddr,
+ ntohs(inet->inet_dport), sk->sk_err,
sk->sk_err_soft);
- } else {
- struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&saddr;
-
+ break;
+ case AF_INET6:
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
- "sending to node %d at %u.%u.%u.%u, "
- "port %d, sk_err=%d/%d\n", dlm_our_nodeid(),
- con->nodeid, sin6->sin6_addr.s6_addr32[0],
- sin6->sin6_addr.s6_addr32[1],
- sin6->sin6_addr.s6_addr32[2],
- sin6->sin6_addr.s6_addr32[3],
- dlm_config.ci_tcp_port, sk->sk_err,
+ "sending to node %d at %pI6c, "
+ "dport %d, sk_err=%d/%d\n", dlm_our_nodeid(),
+ con->nodeid, &sk->sk_v6_daddr,
+ ntohs(inet->inet_dport), sk->sk_err,
sk->sk_err_soft);
+ break;
+ default:
+ printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
+ "invalid socket family %d set, "
+ "sk_err=%d/%d\n", dlm_our_nodeid(),
+ sk->sk_family, sk->sk_err, sk->sk_err_soft);
+ goto out;
}
/* below sendcon only handling */
--
2.34.1
From: Alexander Stein <[email protected]>
[ Upstream commit bb98a6fd0b0e227cefb2ba91cea2b55455f203b7 ]
Starting with commit 94274f20f6bf ("dt-bindings: opp: Convert to DT
schema") the opp node name has a mandatory pattern. This change
fixes the dtbs_check warning:
gpu-opp-table: $nodename:0: 'gpu-opp-table' does not match
'^opp-table(-[a-z0-9]+)?$'
Put the 'gpu' part at the end to match the pattern.
Fixes: 916a0edc43f0 ("arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS")
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 00c6f53290d43..428449d98c0ae 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -58,7 +58,7 @@
secure-monitor = <&sm>;
};
- gpu_opp_table: gpu-opp-table {
+ gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
opp-124999998 {
--
2.34.1
From: Chengfeng Ye <[email protected]>
[ Upstream commit e9c195aaeed1b45c9012adbe29dedb6031e85aa8 ]
Pointer alg points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing alg before free tmpl.
Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <[email protected]>
Acked-by: Thara Gopinath <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qce/skcipher.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/qce/skcipher.c b/drivers/crypto/qce/skcipher.c
index 8ff10928f581d..3d27cd5210ef5 100644
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -484,8 +484,8 @@ static int qce_skcipher_register_one(const struct qce_skcipher_def *def,
ret = crypto_register_skcipher(alg);
if (ret) {
- kfree(tmpl);
dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name);
+ kfree(tmpl);
return ret;
}
--
2.34.1
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 3652096e5263ad67604b0323f71d133485f410e5 ]
When unloading the driver we are not releasing the DMA descriptors which we
previously allocated.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 0c4f63f1312f8..017c7d78072ba 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -1014,4 +1014,9 @@ void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_l_ch);
wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_h_ch);
+
+ wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_tx_l_ch);
+ wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_tx_h_ch);
+ wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_rx_l_ch);
+ wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_rx_h_ch);
}
--
2.34.1
From: Jens Wiklander <[email protected]>
[ Upstream commit f18397ab3ae23e8e43bba9986e66af6d4497f2ad ]
Prior to this patch was teedev_close_context() calling tee_device_put()
before teedev_ctx_put() leading to teedev_ctx_release() accessing
ctx->teedev just after the reference counter was decreased on the
teedev. Fix this by calling teedev_ctx_put() before tee_device_put().
Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Jens Wiklander <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tee/tee_core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
index 2b37bc408fc3d..85102d12d7169 100644
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -98,8 +98,10 @@ void teedev_ctx_put(struct tee_context *ctx)
static void teedev_close_context(struct tee_context *ctx)
{
- tee_device_put(ctx->teedev);
+ struct tee_device *teedev = ctx->teedev;
+
teedev_ctx_put(ctx);
+ tee_device_put(teedev);
}
static int tee_open(struct inode *inode, struct file *filp)
--
2.34.1
From: Tudor Ambarus <[email protected]>
[ Upstream commit 6d48de655917a9d782953eba65de4e3db593ddf0 ]
In case there were more requests from different tfms in the crypto
queue, only the context of the last initialized tfm was considered.
Fixes: ec2088b66f7a ("crypto: atmel-aes - Allocate aes dev at tfm init time")
Reported-by: Wolfgang Ocker <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/atmel-aes.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c
index 9391ccc03382d..fe05584031914 100644
--- a/drivers/crypto/atmel-aes.c
+++ b/drivers/crypto/atmel-aes.c
@@ -960,6 +960,7 @@ static int atmel_aes_handle_queue(struct atmel_aes_dev *dd,
ctx = crypto_tfm_ctx(areq->tfm);
dd->areq = areq;
+ dd->ctx = ctx;
start_async = (areq != new_areq);
dd->is_async = start_async;
@@ -1274,7 +1275,6 @@ static int atmel_aes_init_tfm(struct crypto_skcipher *tfm)
crypto_skcipher_set_reqsize(tfm, sizeof(struct atmel_aes_reqctx));
ctx->base.dd = dd;
- ctx->base.dd->ctx = &ctx->base;
ctx->base.start = atmel_aes_start;
return 0;
@@ -1291,7 +1291,6 @@ static int atmel_aes_ctr_init_tfm(struct crypto_skcipher *tfm)
crypto_skcipher_set_reqsize(tfm, sizeof(struct atmel_aes_reqctx));
ctx->base.dd = dd;
- ctx->base.dd->ctx = &ctx->base;
ctx->base.start = atmel_aes_ctr_start;
return 0;
@@ -1783,7 +1782,6 @@ static int atmel_aes_gcm_init(struct crypto_aead *tfm)
crypto_aead_set_reqsize(tfm, sizeof(struct atmel_aes_reqctx));
ctx->base.dd = dd;
- ctx->base.dd->ctx = &ctx->base;
ctx->base.start = atmel_aes_gcm_start;
return 0;
@@ -1927,7 +1925,6 @@ static int atmel_aes_xts_init_tfm(struct crypto_skcipher *tfm)
crypto_skcipher_set_reqsize(tfm, sizeof(struct atmel_aes_reqctx) +
crypto_skcipher_reqsize(ctx->fallback_tfm));
ctx->base.dd = dd;
- ctx->base.dd->ctx = &ctx->base;
ctx->base.start = atmel_aes_xts_start;
return 0;
@@ -2154,7 +2151,6 @@ static int atmel_aes_authenc_init_tfm(struct crypto_aead *tfm,
crypto_aead_set_reqsize(tfm, (sizeof(struct atmel_aes_authenc_reqctx) +
auth_reqsize));
ctx->base.dd = dd;
- ctx->base.dd->ctx = &ctx->base;
ctx->base.start = atmel_aes_authenc_start;
return 0;
--
2.34.1
From: Biju Das <[email protected]>
[ Upstream commit e1a9faddffe7e555304dc2e3284c84fbee0679ee ]
The CAT875 sub board from Silicon Linux uses a Realtek PHY.
The phy driver commit bbc4d71d63549bcd003 ("net: phy: realtek: fix
rtl8211e rx/tx delay config") introduced NFS mount failures. Now it
needs both rx/tx delays for the NFS mount to work.
This patch fixes the NFS mount failure issue by adding "rgmii-id" mode
to the avb device node.
Signed-off-by: Biju Das <[email protected]>
Fixes: bbc4d71d63549bcd ("net: phy: realtek: fix rtl8211e rx/tx delay config")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/renesas/cat875.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index 801ea54b027c4..20f8adc635e72 100644
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -18,6 +18,7 @@
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
status = "okay";
phy0: ethernet-phy@0 {
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit caa51a4c11f1cadba9bcf61ed9e0105711952ce7 ]
Since our pre_crtc_configure hook returned void, we didn't implement a
goto-based error path handling, leading to errors like failing to put
back the device in pm_runtime in all the error paths, but also failing
to disable the pixel clock if clk_set_min_rate on the HSM clock fails.
Move to a goto-based implementation to have an easier consitency.
Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Dave Stevenson <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 2087717f1cce9..49944644a9b36 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -933,15 +933,16 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate);
if (ret) {
DRM_ERROR("Failed to set pixel clock rate: %d\n", ret);
- return;
+ goto err_put_runtime_pm;
}
ret = clk_prepare_enable(vc4_hdmi->pixel_clock);
if (ret) {
DRM_ERROR("Failed to turn on pixel clock: %d\n", ret);
- return;
+ goto err_put_runtime_pm;
}
+
vc4_hdmi_cec_update_clk_div(vc4_hdmi);
if (pixel_rate > 297000000)
@@ -954,15 +955,13 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate);
if (ret) {
DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
- clk_disable_unprepare(vc4_hdmi->pixel_clock);
- return;
+ goto err_disable_pixel_clock;
}
ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
if (ret) {
DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret);
- clk_disable_unprepare(vc4_hdmi->pixel_clock);
- return;
+ goto err_disable_pixel_clock;
}
if (vc4_hdmi->variant->phy_init)
@@ -975,6 +974,15 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
if (vc4_hdmi->variant->set_timings)
vc4_hdmi->variant->set_timings(vc4_hdmi, conn_state, mode);
+
+ return;
+
+err_disable_pixel_clock:
+ clk_disable_unprepare(vc4_hdmi->pixel_clock);
+err_put_runtime_pm:
+ pm_runtime_put(&vc4_hdmi->pdev->dev);
+
+ return;
}
static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder,
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit c10bcb13462e9cf43111d17f1e08b4bb4d4401b0 ]
This is almost a BUG report with RFC patch that just avoids kernel
oopses. Thus, prefixed with [BUG][RFC].
Here is the kernel log after running `v4l2-compliance -d /dev/video4`
with this patch applied:
kern :err : [25507.580392] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.592343] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.592995] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.593685] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.593719] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.593727] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
[omitting 42 same messages]
kern :err : [25507.593976] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594191] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594449] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
[omitting 43 same messages]
kern :err : [25507.594756] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594779] atomisp-isp2 0000:00:03.0: atomisp_g_ctrl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594787] atomisp-isp2 0000:00:03.0: atomisp_s_ctrl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594803] atomisp-isp2 0000:00:03.0: atomisp_camera_g_ext_ctrls(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594880] atomisp-isp2 0000:00:03.0: atomisp_enum_fmt_cap(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594915] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595058] atomisp-isp2 0000:00:03.0: atomisp_try_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595089] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595124] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595221] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595241] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.601571] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.607496] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.608604] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.611988] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.617420] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.618429] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.618811] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.622193] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.627355] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.628391] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.631143] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.635813] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.636489] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.636504] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.636516] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.639111] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.646152] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.646831] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.646847] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.650079] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.657476] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.658741] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.658759] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.658771] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.660959] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.666665] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.667397] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
[mchehab: fix coding style]
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/atomisp_cmd.c | 73 +++++++++++++++
.../staging/media/atomisp/pci/atomisp_fops.c | 6 ++
.../staging/media/atomisp/pci/atomisp_ioctl.c | 90 +++++++++++++++++++
3 files changed, 169 insertions(+)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index 366161cff5602..75a531667d743 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -1715,6 +1715,12 @@ void atomisp_wdt_refresh_pipe(struct atomisp_video_pipe *pipe,
{
unsigned long next;
+ if (!pipe->asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return;
+ }
+
if (delay != ATOMISP_WDT_KEEP_CURRENT_DELAY)
pipe->wdt_duration = delay;
@@ -1777,6 +1783,12 @@ void atomisp_wdt_refresh(struct atomisp_sub_device *asd, unsigned int delay)
/* ISP2401 */
void atomisp_wdt_stop_pipe(struct atomisp_video_pipe *pipe, bool sync)
{
+ if (!pipe->asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return;
+ }
+
if (!atomisp_is_wdt_running(pipe))
return;
@@ -4109,6 +4121,12 @@ void atomisp_handle_parameter_and_buffer(struct atomisp_video_pipe *pipe)
unsigned long irqflags;
bool need_to_enqueue_buffer = false;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return;
+ }
+
if (atomisp_is_vf_pipe(pipe))
return;
@@ -4196,6 +4214,12 @@ int atomisp_set_parameters(struct video_device *vdev,
struct atomisp_css_params *css_param = &asd->params.css_param;
int ret;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].stream) {
dev_err(asd->isp->dev, "%s: internal error!\n", __func__);
return -EINVAL;
@@ -4857,6 +4881,12 @@ int atomisp_try_fmt(struct video_device *vdev, struct v4l2_pix_format *f,
int source_pad = atomisp_subdev_source_pad(vdev);
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!isp->inputs[asd->input_curr].camera)
return -EINVAL;
@@ -5198,6 +5228,12 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
const struct atomisp_in_fmt_conv *fc;
int ret, i;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
v4l2_fh_init(&fh.vfh, vdev);
isp_sink_crop = atomisp_subdev_get_rect(
@@ -5494,6 +5530,7 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev,
unsigned int dvs_env_w, unsigned int dvs_env_h)
{
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
+ struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev);
const struct atomisp_format_bridge *format;
struct v4l2_subdev_pad_config pad_cfg;
struct v4l2_subdev_state pad_state = {
@@ -5512,6 +5549,12 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev,
struct v4l2_subdev_fh fh;
int ret;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
v4l2_fh_init(&fh.vfh, vdev);
stream_index = atomisp_source_pad_to_stream_id(asd, source_pad);
@@ -5602,6 +5645,12 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
struct v4l2_subdev_fh fh;
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (source_pad >= ATOMISP_SUBDEV_PADS_NUM)
return -EINVAL;
@@ -6034,6 +6083,12 @@ int atomisp_set_fmt_file(struct video_device *vdev, struct v4l2_format *f)
struct v4l2_subdev_fh fh;
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
v4l2_fh_init(&fh.vfh, vdev);
dev_dbg(isp->dev, "setting fmt %ux%u 0x%x for file inject\n",
@@ -6359,6 +6414,12 @@ bool atomisp_is_vf_pipe(struct atomisp_video_pipe *pipe)
{
struct atomisp_sub_device *asd = pipe->asd;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return false;
+ }
+
if (pipe == &asd->video_out_vf)
return true;
@@ -6572,6 +6633,12 @@ static int atomisp_get_pipe_id(struct atomisp_video_pipe *pipe)
{
struct atomisp_sub_device *asd = pipe->asd;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return -EINVAL;
+ }
+
if (ATOMISP_USE_YUVPP(asd)) {
return IA_CSS_PIPE_ID_YUVPP;
} else if (asd->vfpp->val == ATOMISP_VFPP_DISABLE_SCALER) {
@@ -6609,6 +6676,12 @@ int atomisp_get_invalid_frame_num(struct video_device *vdev,
struct ia_css_pipe_info p_info;
int ret;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (asd->isp->inputs[asd->input_curr].camera_caps->
sensor[asd->sensor_curr].stream_num > 1) {
/* External ISP */
diff --git a/drivers/staging/media/atomisp/pci/atomisp_fops.c b/drivers/staging/media/atomisp/pci/atomisp_fops.c
index f82bf082aa796..02c19b92bdccb 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_fops.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_fops.c
@@ -1171,6 +1171,12 @@ static int atomisp_mmap(struct file *file, struct vm_area_struct *vma)
u32 origin_size, new_size;
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!(vma->vm_flags & (VM_WRITE | VM_READ)))
return -EACCES;
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index c8a625667e81e..a57e640fbf791 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -646,6 +646,12 @@ static int atomisp_g_input(struct file *file, void *fh, unsigned int *input)
struct atomisp_device *isp = video_get_drvdata(vdev);
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
*input = asd->input_curr;
rt_mutex_unlock(&isp->mutex);
@@ -665,6 +671,12 @@ static int atomisp_s_input(struct file *file, void *fh, unsigned int input)
struct v4l2_subdev *motor;
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
if (input >= ATOM_ISP_MAX_INPUTS || input >= isp->input_cnt) {
dev_dbg(isp->dev, "input_cnt: %d\n", isp->input_cnt);
@@ -765,6 +777,12 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
unsigned int i, fi = 0;
int rval;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
rval = v4l2_subdev_call(isp->inputs[asd->input_curr].camera, pad,
enum_mbus_code, NULL, &code);
@@ -1027,6 +1045,12 @@ int __atomisp_reqbufs(struct file *file, void *fh,
u16 stream_id = atomisp_source_pad_to_stream_id(asd, source_pad);
int ret = 0, i = 0;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (req->count == 0) {
mutex_lock(&pipe->capq.vb_lock);
if (!list_empty(&pipe->capq.stream))
@@ -1154,6 +1178,12 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
u32 pgnr;
int ret = 0;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
if (isp->isp_fatal_error) {
ret = -EIO;
@@ -1389,6 +1419,12 @@ static int atomisp_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
struct atomisp_device *isp = video_get_drvdata(vdev);
int ret = 0;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
if (isp->isp_fatal_error) {
@@ -1640,6 +1676,12 @@ static int atomisp_streamon(struct file *file, void *fh,
int ret = 0;
unsigned long irqflags;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
dev_dbg(isp->dev, "Start stream on pad %d for asd%d\n",
atomisp_subdev_source_pad(vdev), asd->index);
@@ -1901,6 +1943,12 @@ int __atomisp_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
unsigned long flags;
bool first_streamoff = false;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
dev_dbg(isp->dev, "Stop stream on pad %d for asd%d\n",
atomisp_subdev_source_pad(vdev), asd->index);
@@ -2150,6 +2198,12 @@ static int atomisp_g_ctrl(struct file *file, void *fh,
struct atomisp_device *isp = video_get_drvdata(vdev);
int i, ret = -EINVAL;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
for (i = 0; i < ctrls_num; i++) {
if (ci_v4l2_controls[i].id == control->id) {
ret = 0;
@@ -2229,6 +2283,12 @@ static int atomisp_s_ctrl(struct file *file, void *fh,
struct atomisp_device *isp = video_get_drvdata(vdev);
int i, ret = -EINVAL;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
for (i = 0; i < ctrls_num; i++) {
if (ci_v4l2_controls[i].id == control->id) {
ret = 0;
@@ -2310,6 +2370,12 @@ static int atomisp_queryctl(struct file *file, void *fh,
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
struct atomisp_device *isp = video_get_drvdata(vdev);
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
switch (qc->id) {
case V4L2_CID_FOCUS_ABSOLUTE:
case V4L2_CID_FOCUS_RELATIVE:
@@ -2355,6 +2421,12 @@ static int atomisp_camera_g_ext_ctrls(struct file *file, void *fh,
int i;
int ret = 0;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!IS_ISP2401)
motor = isp->inputs[asd->input_curr].motor;
else
@@ -2466,6 +2538,12 @@ static int atomisp_camera_s_ext_ctrls(struct file *file, void *fh,
int i;
int ret = 0;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!IS_ISP2401)
motor = isp->inputs[asd->input_curr].motor;
else
@@ -2591,6 +2669,12 @@ static int atomisp_g_parm(struct file *file, void *fh,
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
struct atomisp_device *isp = video_get_drvdata(vdev);
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
dev_err(isp->dev, "unsupported v4l2 buf type\n");
return -EINVAL;
@@ -2613,6 +2697,12 @@ static int atomisp_s_parm(struct file *file, void *fh,
int rval;
int fps;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
dev_err(isp->dev, "unsupported v4l2 buf type\n");
return -EINVAL;
--
2.34.1
From: Wen Gong <[email protected]>
commit fc95d10ac41d75c14a81afcc8722333d8b2cf80f upstream.
Currently ath11k only support string type with bus, chip id and board id
such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and
"bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in
board-2.bin. For WCN6855, it is not enough to distinguish all different
chips.
This is to add a new string type which include bus, chip id, board id,
vendor, device, subsystem-vendor and subsystem-device for WCN6855.
ath11k will first load board-2.bin and search in it for the board data
with the above parameters, if matched one board data, then download it
to firmware, if not matched any one, then ath11k will download the file
board.bin to firmware.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: "Limonciello, Mario" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath11k/core.c | 27 +++++++++++++++++++++------
drivers/net/wireless/ath/ath11k/core.h | 13 +++++++++++++
drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++
3 files changed, 44 insertions(+), 6 deletions(-)
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -347,11 +347,26 @@ static int ath11k_core_create_board_name
scnprintf(variant, sizeof(variant), ",variant=%s",
ab->qmi.target.bdf_ext);
- scnprintf(name, name_len,
- "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s",
- ath11k_bus_str(ab->hif.bus),
- ab->qmi.target.chip_id,
- ab->qmi.target.board_id, variant);
+ switch (ab->id.bdf_search) {
+ case ATH11K_BDF_SEARCH_BUS_AND_BOARD:
+ scnprintf(name, name_len,
+ "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%d,qmi-board-id=%d%s",
+ ath11k_bus_str(ab->hif.bus),
+ ab->id.vendor, ab->id.device,
+ ab->id.subsystem_vendor,
+ ab->id.subsystem_device,
+ ab->qmi.target.chip_id,
+ ab->qmi.target.board_id,
+ variant);
+ break;
+ default:
+ scnprintf(name, name_len,
+ "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s",
+ ath11k_bus_str(ab->hif.bus),
+ ab->qmi.target.chip_id,
+ ab->qmi.target.board_id, variant);
+ break;
+ }
ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot using board name '%s'\n", name);
@@ -588,7 +603,7 @@ static int ath11k_core_fetch_board_data_
return 0;
}
-#define BOARD_NAME_SIZE 100
+#define BOARD_NAME_SIZE 200
int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd)
{
char boardname[BOARD_NAME_SIZE];
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -47,6 +47,11 @@ enum ath11k_supported_bw {
ATH11K_BW_160 = 3,
};
+enum ath11k_bdf_search {
+ ATH11K_BDF_SEARCH_DEFAULT,
+ ATH11K_BDF_SEARCH_BUS_AND_BOARD,
+};
+
enum wme_ac {
WME_AC_BE,
WME_AC_BK,
@@ -747,6 +752,14 @@ struct ath11k_base {
struct completion htc_suspend;
+ struct {
+ enum ath11k_bdf_search bdf_search;
+ u32 vendor;
+ u32 device;
+ u32 subsystem_vendor;
+ u32 subsystem_device;
+ } id;
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -1218,6 +1218,15 @@ static int ath11k_pci_probe(struct pci_d
goto err_free_core;
}
+ ath11k_dbg(ab, ATH11K_DBG_BOOT, "pci probe %04x:%04x %04x:%04x\n",
+ pdev->vendor, pdev->device,
+ pdev->subsystem_vendor, pdev->subsystem_device);
+
+ ab->id.vendor = pdev->vendor;
+ ab->id.device = pdev->device;
+ ab->id.subsystem_vendor = pdev->subsystem_vendor;
+ ab->id.subsystem_device = pdev->subsystem_device;
+
switch (pci_dev->device) {
case QCA6390_DEVICE_ID:
ath11k_pci_read_hw_version(ab, &soc_hw_version_major,
@@ -1240,6 +1249,7 @@ static int ath11k_pci_probe(struct pci_d
ab->hw_rev = ATH11K_HW_QCN9074_HW10;
break;
case WCN6855_DEVICE_ID:
+ ab->id.bdf_search = ATH11K_BDF_SEARCH_BUS_AND_BOARD;
ath11k_pci_read_hw_version(ab, &soc_hw_version_major,
&soc_hw_version_minor);
switch (soc_hw_version_major) {
From: Gang Li <[email protected]>
commit 62c9827cbb996c2c04f615ecd783ce28bcea894b upstream.
Fix a data race in commit 779750d20b93 ("shmem: split huge pages beyond
i_size under memory pressure").
Here are call traces causing race:
Call Trace 1:
shmem_unused_huge_shrink+0x3ae/0x410
? __list_lru_walk_one.isra.5+0x33/0x160
super_cache_scan+0x17c/0x190
shrink_slab.part.55+0x1ef/0x3f0
shrink_node+0x10e/0x330
kswapd+0x380/0x740
kthread+0xfc/0x130
? mem_cgroup_shrink_node+0x170/0x170
? kthread_create_on_node+0x70/0x70
ret_from_fork+0x1f/0x30
Call Trace 2:
shmem_evict_inode+0xd8/0x190
evict+0xbe/0x1c0
do_unlinkat+0x137/0x330
do_syscall_64+0x76/0x120
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
A simple explanation:
Image there are 3 items in the local list (@list). In the first
traversal, A is not deleted from @list.
1) A->B->C
^
|
pos (leave)
In the second traversal, B is deleted from @list. Concurrently, A is
deleted from @list through shmem_evict_inode() since last reference
counter of inode is dropped by other thread. Then the @list is corrupted.
2) A->B->C
^ ^
| |
evict pos (drop)
We should make sure the inode is either on the global list or deleted from
any local list before iput().
Fixed by moving inodes back to global list before we put them.
[[email protected]: coding style fixes]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Gang Li <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/shmem.c | 37 +++++++++++++++++++++----------------
1 file changed, 21 insertions(+), 16 deletions(-)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -555,7 +555,7 @@ static unsigned long shmem_unused_huge_s
struct shmem_inode_info *info;
struct page *page;
unsigned long batch = sc ? sc->nr_to_scan : 128;
- int removed = 0, split = 0;
+ int split = 0;
if (list_empty(&sbinfo->shrinklist))
return SHRINK_STOP;
@@ -570,7 +570,6 @@ static unsigned long shmem_unused_huge_s
/* inode is about to be evicted */
if (!inode) {
list_del_init(&info->shrinklist);
- removed++;
goto next;
}
@@ -578,12 +577,12 @@ static unsigned long shmem_unused_huge_s
if (round_up(inode->i_size, PAGE_SIZE) ==
round_up(inode->i_size, HPAGE_PMD_SIZE)) {
list_move(&info->shrinklist, &to_remove);
- removed++;
goto next;
}
list_move(&info->shrinklist, &list);
next:
+ sbinfo->shrinklist_len--;
if (!--batch)
break;
}
@@ -603,7 +602,7 @@ next:
inode = &info->vfs_inode;
if (nr_to_split && split >= nr_to_split)
- goto leave;
+ goto move_back;
page = find_get_page(inode->i_mapping,
(inode->i_size & HPAGE_PMD_MASK) >> PAGE_SHIFT);
@@ -617,38 +616,44 @@ next:
}
/*
- * Leave the inode on the list if we failed to lock
- * the page at this time.
+ * Move the inode on the list back to shrinklist if we failed
+ * to lock the page at this time.
*
* Waiting for the lock may lead to deadlock in the
* reclaim path.
*/
if (!trylock_page(page)) {
put_page(page);
- goto leave;
+ goto move_back;
}
ret = split_huge_page(page);
unlock_page(page);
put_page(page);
- /* If split failed leave the inode on the list */
+ /* If split failed move the inode on the list back to shrinklist */
if (ret)
- goto leave;
+ goto move_back;
split++;
drop:
list_del_init(&info->shrinklist);
- removed++;
-leave:
+ goto put;
+move_back:
+ /*
+ * Make sure the inode is either on the global list or deleted
+ * from any local list before iput() since it could be deleted
+ * in another thread once we put the inode (then the local list
+ * is corrupted).
+ */
+ spin_lock(&sbinfo->shrinklist_lock);
+ list_move(&info->shrinklist, &sbinfo->shrinklist);
+ sbinfo->shrinklist_len++;
+ spin_unlock(&sbinfo->shrinklist_lock);
+put:
iput(inode);
}
- spin_lock(&sbinfo->shrinklist_lock);
- list_splice_tail(&list, &sbinfo->shrinklist);
- sbinfo->shrinklist_len -= removed;
- spin_unlock(&sbinfo->shrinklist_lock);
-
return split;
}
From: Wang Hai <[email protected]>
[ Upstream commit acf20ed020ffa4d6cc8347e8d356509b95df3cbe ]
I got a null-ptr-deref report:
[drm:drm_dev_init [drm]] *ERROR* Cannot allocate anonymous inode: -12
==================================================================
BUG: KASAN: null-ptr-deref in iput+0x3c/0x4a0
...
Call Trace:
dump_stack_lvl+0x6c/0x8b
kasan_report.cold+0x64/0xdb
__asan_load8+0x69/0x90
iput+0x3c/0x4a0
drm_dev_init_release+0x39/0xb0 [drm]
drm_managed_release+0x158/0x2d0 [drm]
drm_dev_init+0x3a7/0x4c0 [drm]
__devm_drm_dev_alloc+0x55/0xd0 [drm]
mi0283qt_probe+0x8a/0x2b5 [mi0283qt]
spi_probe+0xeb/0x130
...
entry_SYSCALL_64_after_hwframe+0x44/0xae
If drm_fs_inode_new() fails in drm_dev_init(), dev->anon_inode will point
to PTR_ERR(...) instead of NULL. This will result in null-ptr-deref when
drm_fs_inode_free(dev->anon_inode) is called.
drm_dev_init()
drm_fs_inode_new() // fail, dev->anon_inode = PTR_ERR(...)
drm_managed_release()
drm_dev_init_release()
drm_fs_inode_free() // access non-existent anon_inode
Define a temp variable and assign it to dev->anon_inode if the temp
variable is not PTR_ERR.
Fixes: 2cbf7fc6718b ("drm: Use drmm_ for drm_dev_init cleanup")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_drv.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 7a5097467ba5c..b3a1636d1b984 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -581,6 +581,7 @@ static int drm_dev_init(struct drm_device *dev,
const struct drm_driver *driver,
struct device *parent)
{
+ struct inode *inode;
int ret;
if (!drm_core_init_complete) {
@@ -617,13 +618,15 @@ static int drm_dev_init(struct drm_device *dev,
if (ret)
return ret;
- dev->anon_inode = drm_fs_inode_new();
- if (IS_ERR(dev->anon_inode)) {
- ret = PTR_ERR(dev->anon_inode);
+ inode = drm_fs_inode_new();
+ if (IS_ERR(inode)) {
+ ret = PTR_ERR(inode);
DRM_ERROR("Cannot allocate anonymous inode: %d\n", ret);
goto err;
}
+ dev->anon_inode = inode;
+
if (drm_core_check_feature(dev, DRIVER_RENDER)) {
ret = drm_minor_alloc(dev, DRM_MINOR_RENDER);
if (ret)
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit d21ce8c2f7bf6d737b60c09f86db141b9e8e47f0 ]
The function ia_css_mipi_is_source_port_valid() returns true if the port
is valid. So, we can't use the existing err variable as is.
To fix this issue while reusing that variable, invert the return value
when assigning it to the variable.
Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/sh_css_mipi.c | 24 ++++++++++++-------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
index 65fc93c5d56bc..c1f2f6151c5f8 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
@@ -423,10 +423,12 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
return 0; /* AM TODO: Check */
}
- if (!IS_ISP2401)
+ if (!IS_ISP2401) {
port = (unsigned int)pipe->stream->config.source.port.port;
- else
- err = ia_css_mipi_is_source_port_valid(pipe, &port);
+ } else {
+ /* Returns true if port is valid. So, invert it */
+ err = !ia_css_mipi_is_source_port_valid(pipe, &port);
+ }
assert(port < N_CSI_PORTS);
@@ -553,10 +555,12 @@ free_mipi_frames(struct ia_css_pipe *pipe)
return err;
}
- if (!IS_ISP2401)
+ if (!IS_ISP2401) {
port = (unsigned int)pipe->stream->config.source.port.port;
- else
- err = ia_css_mipi_is_source_port_valid(pipe, &port);
+ } else {
+ /* Returns true if port is valid. So, invert it */
+ err = !ia_css_mipi_is_source_port_valid(pipe, &port);
+ }
assert(port < N_CSI_PORTS);
@@ -665,10 +669,12 @@ send_mipi_frames(struct ia_css_pipe *pipe)
/* TODO: AM: maybe this should be returning an error. */
}
- if (!IS_ISP2401)
+ if (!IS_ISP2401) {
port = (unsigned int)pipe->stream->config.source.port.port;
- else
- err = ia_css_mipi_is_source_port_valid(pipe, &port);
+ } else {
+ /* Returns true if port is valid. So, invert it */
+ err = !ia_css_mipi_is_source_port_valid(pipe, &port);
+ }
assert(port < N_CSI_PORTS);
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit 3a56ef719f0b9682afb8a86d64b2399e36faa4e6 ]
Syzbot reported slab-out-of-bounds read in hci_le_adv_report_evt(). The
problem was in missing validaion check.
We should check if data is not malicious and we can read next data block.
If we won't check ptr validness, code can read a way beyond skb->end and
it can cause problems, of course.
Fixes: e95beb414168 ("Bluetooth: hci_le_adv_report_evt code refactoring")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_event.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 0bca035bf2dcc..50d1d62c15ec8 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5780,7 +5780,8 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
struct hci_ev_le_advertising_info *ev = ptr;
s8 rssi;
- if (ev->length <= HCI_MAX_AD_LENGTH) {
+ if (ev->length <= HCI_MAX_AD_LENGTH &&
+ ev->data + ev->length <= skb_tail_pointer(skb)) {
rssi = ev->data[ev->length];
process_adv_report(hdev, ev->evt_type, &ev->bdaddr,
ev->bdaddr_type, NULL, 0, rssi,
@@ -5790,6 +5791,11 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
}
ptr += sizeof(*ev) + ev->length + 1;
+
+ if (ptr > (void *) skb_tail_pointer(skb) - sizeof(*ev)) {
+ bt_dev_err(hdev, "Malicious advertising data. Stopping processing");
+ break;
+ }
}
hci_dev_unlock(hdev);
--
2.34.1
From: Hans Verkuil <[email protected]>
commit 713bdfa10b5957053811470d298def9537d9ff13 upstream.
The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.
Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.
If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: 865463fc03ed (media: cec-pin: add error injection support)
Cc: <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/cec/core/cec-pin.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
--- a/drivers/media/cec/core/cec-pin.c
+++ b/drivers/media/cec/core/cec-pin.c
@@ -1033,6 +1033,7 @@ static int cec_pin_thread_func(void *_ad
{
struct cec_adapter *adap = _adap;
struct cec_pin *pin = adap->pin;
+ bool irq_enabled = false;
for (;;) {
wait_event_interruptible(pin->kthread_waitq,
@@ -1060,6 +1061,7 @@ static int cec_pin_thread_func(void *_ad
ns_to_ktime(pin->work_rx_msg.rx_ts));
msg->len = 0;
}
+
if (pin->work_tx_status) {
unsigned int tx_status = pin->work_tx_status;
@@ -1083,27 +1085,39 @@ static int cec_pin_thread_func(void *_ad
switch (atomic_xchg(&pin->work_irq_change,
CEC_PIN_IRQ_UNCHANGED)) {
case CEC_PIN_IRQ_DISABLE:
- pin->ops->disable_irq(adap);
+ if (irq_enabled) {
+ pin->ops->disable_irq(adap);
+ irq_enabled = false;
+ }
cec_pin_high(pin);
cec_pin_to_idle(pin);
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
break;
case CEC_PIN_IRQ_ENABLE:
+ if (irq_enabled)
+ break;
pin->enable_irq_failed = !pin->ops->enable_irq(adap);
if (pin->enable_irq_failed) {
cec_pin_to_idle(pin);
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
+ } else {
+ irq_enabled = true;
}
break;
default:
break;
}
-
if (kthread_should_stop())
break;
}
+ if (pin->ops->disable_irq && irq_enabled)
+ pin->ops->disable_irq(adap);
+ hrtimer_cancel(&pin->timer);
+ cec_pin_read(pin);
+ cec_pin_to_idle(pin);
+ pin->state = CEC_ST_OFF;
return 0;
}
@@ -1130,13 +1144,7 @@ static int cec_pin_adap_enable(struct ce
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
} else {
- if (pin->ops->disable_irq)
- pin->ops->disable_irq(adap);
- hrtimer_cancel(&pin->timer);
kthread_stop(pin->kthread);
- cec_pin_read(pin);
- cec_pin_to_idle(pin);
- pin->state = CEC_ST_OFF;
}
return 0;
}
@@ -1157,11 +1165,8 @@ void cec_pin_start_timer(struct cec_pin
if (pin->state != CEC_ST_RX_IRQ)
return;
- atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
- pin->ops->disable_irq(pin->adap);
- cec_pin_high(pin);
- cec_pin_to_idle(pin);
- hrtimer_start(&pin->timer, ns_to_ktime(0), HRTIMER_MODE_REL);
+ atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_DISABLE);
+ wake_up_interruptible(&pin->kthread_waitq);
}
static int cec_pin_adap_transmit(struct cec_adapter *adap, u8 attempts,
From: Johan Hovold <[email protected]>
commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)")
Cc: [email protected] # 3.7
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/stk1160/stk1160-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/stk1160/stk1160-core.c
+++ b/drivers/media/usb/stk1160/stk1160-core.c
@@ -65,7 +65,7 @@ int stk1160_read_reg(struct stk1160 *dev
return -ENOMEM;
ret = usb_control_msg(dev->udev, pipe, 0x00,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x00, reg, buf, sizeof(u8), HZ);
+ 0x00, reg, buf, sizeof(u8), 1000);
if (ret < 0) {
stk1160_err("read failed on reg 0x%x (%d)\n",
reg, ret);
@@ -85,7 +85,7 @@ int stk1160_write_reg(struct stk1160 *de
ret = usb_control_msg(dev->udev, pipe, 0x01,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, reg, NULL, 0, HZ);
+ value, reg, NULL, 0, 1000);
if (ret < 0) {
stk1160_err("write failed on reg 0x%x (%d)\n",
reg, ret);
From: Manivannan Sadhasivam <[email protected]>
commit d651ce8e917fa1bf6cfab8dca74c512edffc35d3 upstream.
During SYS_ERR condition, as a response to the MHI_RESET from host, some
devices tend to issue BHI interrupt without clearing the SYS_ERR state in
the device. This creates a race condition and causes a failure in booting
up the device.
The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR
handling in mhi_async_power_up(). Once the host detects that the device
is in SYS_ERR state, it issues MHI_RESET and waits for the device to
process the reset request. During this time, the device triggers the BHI
interrupt to the host without clearing SYS_ERR condition. So the host
starts handling the SYS_ERR condition again.
To fix this issue, let's register the IRQ handler only after handling the
SYS_ERR check to avoid getting spurious IRQs from the device.
Fixes: e18d4e9fa79b ("bus: mhi: core: Handle syserr during power_up")
Cc: [email protected]
Reported-by: Aleksander Morgado <[email protected]>
Tested-by: Aleksander Morgado <[email protected]>
Tested-by: Thomas Perrot <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bus/mhi/core/pm.c | 35 ++++++++++++-----------------------
1 file changed, 12 insertions(+), 23 deletions(-)
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -1053,7 +1053,7 @@ int mhi_async_power_up(struct mhi_contro
enum mhi_ee_type current_ee;
enum dev_st_transition next_state;
struct device *dev = &mhi_cntrl->mhi_dev->dev;
- u32 val;
+ u32 interval_us = 25000; /* poll register field every 25 milliseconds */
int ret;
dev_info(dev, "Requested to power ON\n");
@@ -1070,10 +1070,6 @@ int mhi_async_power_up(struct mhi_contro
mutex_lock(&mhi_cntrl->pm_mutex);
mhi_cntrl->pm_state = MHI_PM_DISABLE;
- ret = mhi_init_irq_setup(mhi_cntrl);
- if (ret)
- goto error_setup_irq;
-
/* Setup BHI INTVEC */
write_lock_irq(&mhi_cntrl->pm_lock);
mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
@@ -1087,7 +1083,7 @@ int mhi_async_power_up(struct mhi_contro
dev_err(dev, "%s is not a valid EE for power on\n",
TO_MHI_EXEC_STR(current_ee));
ret = -EIO;
- goto error_async_power_up;
+ goto error_exit;
}
state = mhi_get_mhi_state(mhi_cntrl);
@@ -1096,20 +1092,12 @@ int mhi_async_power_up(struct mhi_contro
if (state == MHI_STATE_SYS_ERR) {
mhi_set_mhi_state(mhi_cntrl, MHI_STATE_RESET);
- ret = wait_event_timeout(mhi_cntrl->state_event,
- MHI_PM_IN_FATAL_STATE(mhi_cntrl->pm_state) ||
- mhi_read_reg_field(mhi_cntrl,
- mhi_cntrl->regs,
- MHICTRL,
- MHICTRL_RESET_MASK,
- MHICTRL_RESET_SHIFT,
- &val) ||
- !val,
- msecs_to_jiffies(mhi_cntrl->timeout_ms));
- if (!ret) {
- ret = -EIO;
+ ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
+ MHICTRL_RESET_MASK, MHICTRL_RESET_SHIFT, 0,
+ interval_us);
+ if (ret) {
dev_info(dev, "Failed to reset MHI due to syserr state\n");
- goto error_async_power_up;
+ goto error_exit;
}
/*
@@ -1119,6 +1107,10 @@ int mhi_async_power_up(struct mhi_contro
mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
}
+ ret = mhi_init_irq_setup(mhi_cntrl);
+ if (ret)
+ goto error_exit;
+
/* Transition to next state */
next_state = MHI_IN_PBL(current_ee) ?
DEV_ST_TRANSITION_PBL : DEV_ST_TRANSITION_READY;
@@ -1131,10 +1123,7 @@ int mhi_async_power_up(struct mhi_contro
return 0;
-error_async_power_up:
- mhi_deinit_free_irq(mhi_cntrl);
-
-error_setup_irq:
+error_exit:
mhi_cntrl->pm_state = MHI_PM_DISABLE;
mutex_unlock(&mhi_cntrl->pm_mutex);
From: Dan Carpenter <[email protected]>
[ Upstream commit cebbb5c46d0cb0615fd0c62dea9b44273d0a9780 ]
The devm_gen_pool_create() function never returns NULL, it returns
error pointers.
Fixes: 4cc9b565454b ("drm/vboxvideo: Use devm_gen_pool_create")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118111233.GA1147@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vboxvideo/vbox_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/vboxvideo/vbox_main.c b/drivers/gpu/drm/vboxvideo/vbox_main.c
index f28779715ccda..c9e8b3a63c621 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_main.c
+++ b/drivers/gpu/drm/vboxvideo/vbox_main.c
@@ -127,8 +127,8 @@ int vbox_hw_init(struct vbox_private *vbox)
/* Create guest-heap mem-pool use 2^4 = 16 byte chunks */
vbox->guest_pool = devm_gen_pool_create(vbox->ddev.dev, 4, -1,
"vboxvideo-accel");
- if (!vbox->guest_pool)
- return -ENOMEM;
+ if (IS_ERR(vbox->guest_pool))
+ return PTR_ERR(vbox->guest_pool);
ret = gen_pool_add_virt(vbox->guest_pool,
(unsigned long)vbox->guest_heap,
--
2.34.1
From: Johan Hovold <[email protected]>
commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream.
In case device registration fails during probe, the driver state and
the embedded platform device structure needs to be freed using
platform_device_put() to properly free all resources (e.g. the device
name).
Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected] # 2.6.38
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/softing/softing_cs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/softing/softing_cs.c
+++ b/drivers/net/can/softing/softing_cs.c
@@ -293,7 +293,7 @@ static int softingcs_probe(struct pcmcia
return 0;
platform_failed:
- kfree(dev);
+ platform_device_put(pdev);
mem_failed:
pcmcia_bad:
pcmcia_failed:
From: Hans Verkuil <[email protected]>
commit a9e6107616bb8108aa4fc22584a05e69761a91f7 upstream.
The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.
However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.
This obviously causes a deadlock.
This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.
But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.
This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.
This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.
Signed-off-by: Hans Verkuil <[email protected]>
Cc: <[email protected]> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/cec/core/cec-adap.c | 38 +++++++++++++++++++++-----------------
drivers/media/cec/core/cec-api.c | 6 ++++++
drivers/media/cec/core/cec-core.c | 3 +++
include/media/cec.h | 11 +++++++++--
4 files changed, 39 insertions(+), 19 deletions(-)
--- a/drivers/media/cec/core/cec-adap.c
+++ b/drivers/media/cec/core/cec-adap.c
@@ -161,10 +161,10 @@ static void cec_queue_event(struct cec_a
u64 ts = ktime_get_ns();
struct cec_fh *fh;
- mutex_lock(&adap->devnode.lock);
+ mutex_lock(&adap->devnode.lock_fhs);
list_for_each_entry(fh, &adap->devnode.fhs, list)
cec_queue_event_fh(fh, ev, ts);
- mutex_unlock(&adap->devnode.lock);
+ mutex_unlock(&adap->devnode.lock_fhs);
}
/* Notify userspace that the CEC pin changed state at the given time. */
@@ -178,11 +178,12 @@ void cec_queue_pin_cec_event(struct cec_
};
struct cec_fh *fh;
- mutex_lock(&adap->devnode.lock);
- list_for_each_entry(fh, &adap->devnode.fhs, list)
+ mutex_lock(&adap->devnode.lock_fhs);
+ list_for_each_entry(fh, &adap->devnode.fhs, list) {
if (fh->mode_follower == CEC_MODE_MONITOR_PIN)
cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
- mutex_unlock(&adap->devnode.lock);
+ }
+ mutex_unlock(&adap->devnode.lock_fhs);
}
EXPORT_SYMBOL_GPL(cec_queue_pin_cec_event);
@@ -195,10 +196,10 @@ void cec_queue_pin_hpd_event(struct cec_
};
struct cec_fh *fh;
- mutex_lock(&adap->devnode.lock);
+ mutex_lock(&adap->devnode.lock_fhs);
list_for_each_entry(fh, &adap->devnode.fhs, list)
cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
- mutex_unlock(&adap->devnode.lock);
+ mutex_unlock(&adap->devnode.lock_fhs);
}
EXPORT_SYMBOL_GPL(cec_queue_pin_hpd_event);
@@ -211,10 +212,10 @@ void cec_queue_pin_5v_event(struct cec_a
};
struct cec_fh *fh;
- mutex_lock(&adap->devnode.lock);
+ mutex_lock(&adap->devnode.lock_fhs);
list_for_each_entry(fh, &adap->devnode.fhs, list)
cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
- mutex_unlock(&adap->devnode.lock);
+ mutex_unlock(&adap->devnode.lock_fhs);
}
EXPORT_SYMBOL_GPL(cec_queue_pin_5v_event);
@@ -286,12 +287,12 @@ static void cec_queue_msg_monitor(struct
u32 monitor_mode = valid_la ? CEC_MODE_MONITOR :
CEC_MODE_MONITOR_ALL;
- mutex_lock(&adap->devnode.lock);
+ mutex_lock(&adap->devnode.lock_fhs);
list_for_each_entry(fh, &adap->devnode.fhs, list) {
if (fh->mode_follower >= monitor_mode)
cec_queue_msg_fh(fh, msg);
}
- mutex_unlock(&adap->devnode.lock);
+ mutex_unlock(&adap->devnode.lock_fhs);
}
/*
@@ -302,12 +303,12 @@ static void cec_queue_msg_followers(stru
{
struct cec_fh *fh;
- mutex_lock(&adap->devnode.lock);
+ mutex_lock(&adap->devnode.lock_fhs);
list_for_each_entry(fh, &adap->devnode.fhs, list) {
if (fh->mode_follower == CEC_MODE_FOLLOWER)
cec_queue_msg_fh(fh, msg);
}
- mutex_unlock(&adap->devnode.lock);
+ mutex_unlock(&adap->devnode.lock_fhs);
}
/* Notify userspace of an adapter state change. */
@@ -1573,6 +1574,7 @@ void __cec_s_phys_addr(struct cec_adapte
/* Disabling monitor all mode should always succeed */
if (adap->monitor_all_cnt)
WARN_ON(call_op(adap, adap_monitor_all_enable, false));
+ /* serialize adap_enable */
mutex_lock(&adap->devnode.lock);
if (adap->needs_hpd || list_empty(&adap->devnode.fhs)) {
WARN_ON(adap->ops->adap_enable(adap, false));
@@ -1584,14 +1586,16 @@ void __cec_s_phys_addr(struct cec_adapte
return;
}
+ /* serialize adap_enable */
mutex_lock(&adap->devnode.lock);
adap->last_initiator = 0xff;
adap->transmit_in_progress = false;
- if ((adap->needs_hpd || list_empty(&adap->devnode.fhs)) &&
- adap->ops->adap_enable(adap, true)) {
- mutex_unlock(&adap->devnode.lock);
- return;
+ if (adap->needs_hpd || list_empty(&adap->devnode.fhs)) {
+ if (adap->ops->adap_enable(adap, true)) {
+ mutex_unlock(&adap->devnode.lock);
+ return;
+ }
}
if (adap->monitor_all_cnt &&
--- a/drivers/media/cec/core/cec-api.c
+++ b/drivers/media/cec/core/cec-api.c
@@ -586,6 +586,7 @@ static int cec_open(struct inode *inode,
return err;
}
+ /* serialize adap_enable */
mutex_lock(&devnode->lock);
if (list_empty(&devnode->fhs) &&
!adap->needs_hpd &&
@@ -624,7 +625,9 @@ static int cec_open(struct inode *inode,
}
#endif
+ mutex_lock(&devnode->lock_fhs);
list_add(&fh->list, &devnode->fhs);
+ mutex_unlock(&devnode->lock_fhs);
mutex_unlock(&devnode->lock);
return 0;
@@ -653,8 +656,11 @@ static int cec_release(struct inode *ino
cec_monitor_all_cnt_dec(adap);
mutex_unlock(&adap->lock);
+ /* serialize adap_enable */
mutex_lock(&devnode->lock);
+ mutex_lock(&devnode->lock_fhs);
list_del(&fh->list);
+ mutex_unlock(&devnode->lock_fhs);
if (cec_is_registered(adap) && list_empty(&devnode->fhs) &&
!adap->needs_hpd && adap->phys_addr == CEC_PHYS_ADDR_INVALID) {
WARN_ON(adap->ops->adap_enable(adap, false));
--- a/drivers/media/cec/core/cec-core.c
+++ b/drivers/media/cec/core/cec-core.c
@@ -169,8 +169,10 @@ static void cec_devnode_unregister(struc
devnode->registered = false;
devnode->unregistered = true;
+ mutex_lock(&devnode->lock_fhs);
list_for_each_entry(fh, &devnode->fhs, list)
wake_up_interruptible(&fh->wait);
+ mutex_unlock(&devnode->lock_fhs);
mutex_unlock(&devnode->lock);
@@ -272,6 +274,7 @@ struct cec_adapter *cec_allocate_adapter
/* adap->devnode initialization */
INIT_LIST_HEAD(&adap->devnode.fhs);
+ mutex_init(&adap->devnode.lock_fhs);
mutex_init(&adap->devnode.lock);
adap->kthread = kthread_run(cec_thread_func, adap, "cec-%s", name);
--- a/include/media/cec.h
+++ b/include/media/cec.h
@@ -26,13 +26,17 @@
* @dev: cec device
* @cdev: cec character device
* @minor: device node minor number
+ * @lock: lock to serialize open/release and registration
* @registered: the device was correctly registered
* @unregistered: the device was unregistered
+ * @lock_fhs: lock to control access to @fhs
* @fhs: the list of open filehandles (cec_fh)
- * @lock: lock to control access to this structure
*
* This structure represents a cec-related device node.
*
+ * To add or remove filehandles from @fhs the @lock must be taken first,
+ * followed by @lock_fhs. It is safe to access @fhs if either lock is held.
+ *
* The @parent is a physical device. It must be set by core or device drivers
* before registering the node.
*/
@@ -43,10 +47,13 @@ struct cec_devnode {
/* device info */
int minor;
+ /* serialize open/release and registration */
+ struct mutex lock;
bool registered;
bool unregistered;
+ /* protect access to fhs */
+ struct mutex lock_fhs;
struct list_head fhs;
- struct mutex lock;
};
struct cec_adapter;
From: Dongliang Mu <[email protected]>
[ Upstream commit 22be5a10d0b24eec9e45decd15d7e6112b25f080 ]
In the em28xx_init_rev, if em28xx_audio_setup fails, this function fails
to deallocate the media_dev allocated in the em28xx_media_device_init.
Fix this by adding em28xx_unregister_media_device to free media_dev.
BTW, this patch is tested in my local syzkaller instance, and it can
prevent the memory leak from occurring again.
CC: Pavel Skripkin <[email protected]>
Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support")
Signed-off-by: Dongliang Mu <[email protected]>
Reported-by: syzkaller <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/em28xx/em28xx-cards.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 948e22e29b42a..ebc430b05f21c 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -3625,8 +3625,10 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
if (dev->is_audio_only) {
retval = em28xx_audio_setup(dev);
- if (retval)
- return -ENODEV;
+ if (retval) {
+ retval = -ENODEV;
+ goto err_deinit_media;
+ }
em28xx_init_extension(dev);
return 0;
@@ -3645,7 +3647,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
dev_err(&dev->intf->dev,
"%s: em28xx_i2c_register bus 0 - error [%d]!\n",
__func__, retval);
- return retval;
+ goto err_deinit_media;
}
/* register i2c bus 1 */
@@ -3661,9 +3663,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
"%s: em28xx_i2c_register bus 1 - error [%d]!\n",
__func__, retval);
- em28xx_i2c_unregister(dev, 0);
-
- return retval;
+ goto err_unreg_i2c;
}
}
@@ -3671,6 +3671,12 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
em28xx_card_setup(dev);
return 0;
+
+err_unreg_i2c:
+ em28xx_i2c_unregister(dev, 0);
+err_deinit_media:
+ em28xx_unregister_media_device(dev);
+ return retval;
}
static int em28xx_duplicate_dev(struct em28xx *dev)
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit 5d051cf94fd5834a1513aa77e542c49fd973988a ]
Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation
mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might
be connected critical devices (like PMIC) which on suspend/resume should
be suspended/resumed at the end/beginning. i2c uses
.suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom
to use .resume_noirq as it should be resumed before the embedded IPs.
Otherwise the embedded devices might behave badly.
Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset")
Signed-off-by: Claudiu Beznea <[email protected]>
Tested-by: Codrin Ciubotariu <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/atmel-flexcom.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
index 962f66dc8813e..559eb4d352b68 100644
--- a/drivers/mfd/atmel-flexcom.c
+++ b/drivers/mfd/atmel-flexcom.c
@@ -87,7 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
-static int __maybe_unused atmel_flexcom_resume(struct device *dev)
+static int __maybe_unused atmel_flexcom_resume_noirq(struct device *dev)
{
struct atmel_flexcom *ddata = dev_get_drvdata(dev);
int err;
@@ -105,8 +105,9 @@ static int __maybe_unused atmel_flexcom_resume(struct device *dev)
return 0;
}
-static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
- atmel_flexcom_resume);
+static const struct dev_pm_ops atmel_flexcom_pm_ops = {
+ .resume_noirq = atmel_flexcom_resume_noirq,
+};
static struct platform_driver atmel_flexcom_driver = {
.probe = atmel_flexcom_probe,
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit 8c0fad75dcaa650e3f3145a2c35847bc6a65cb7f ]
Remove compilation flag and use __maybe_unused and pm_ptr instead.
Signed-off-by: Claudiu Beznea <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/atmel-flexcom.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
index d2f5c073fdf31..962f66dc8813e 100644
--- a/drivers/mfd/atmel-flexcom.c
+++ b/drivers/mfd/atmel-flexcom.c
@@ -87,8 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
-#ifdef CONFIG_PM_SLEEP
-static int atmel_flexcom_resume(struct device *dev)
+static int __maybe_unused atmel_flexcom_resume(struct device *dev)
{
struct atmel_flexcom *ddata = dev_get_drvdata(dev);
int err;
@@ -105,7 +104,6 @@ static int atmel_flexcom_resume(struct device *dev)
return 0;
}
-#endif
static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
atmel_flexcom_resume);
@@ -114,7 +112,7 @@ static struct platform_driver atmel_flexcom_driver = {
.probe = atmel_flexcom_probe,
.driver = {
.name = "atmel_flexcom",
- .pm = &atmel_flexcom_pm_ops,
+ .pm = pm_ptr(&atmel_flexcom_pm_ops),
.of_match_table = atmel_flexcom_of_match,
},
};
--
2.34.1
From: Alan Maguire <[email protected]>
[ Upstream commit 43174f0d4597325cb91f1f1f55263eb6e6101036 ]
When compiling libbpf with gcc 4.8.5, we see:
CC staticobjs/btf_dump.o
btf_dump.c: In function ‘btf_dump_dump_type_data.isra.24’:
btf_dump.c:2296:5: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (err < 0)
^
cc1: all warnings being treated as errors
make: *** [staticobjs/btf_dump.o] Error 1
While gcc 4.8.5 is too old to build the upstream kernel, it's possible it
could be used to build standalone libbpf which suffers from the same problem.
Silence the error by initializing 'err' to 0. The warning/error seems to be
a false positive since err is set early in the function. Regardless we
shouldn't prevent libbpf from building for this.
Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf_dump.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index e4b483f15fb99..8c9325802793b 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -2186,7 +2186,7 @@ static int btf_dump_dump_type_data(struct btf_dump *d,
__u8 bits_offset,
__u8 bit_sz)
{
- int size, err;
+ int size, err = 0;
size = btf_dump_type_data_check_overflow(d, t, id, data, bits_offset);
if (size < 0)
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit fae46cb0531b45c789e39128f676f2bafa3a7b47 ]
Changeset 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
added an extra verification for a pads parameter for enum mbus
format code.
Such change broke atomisp, because now the V4L2 core
refuses to enum MBUS formats if the state is empty.
So, add .which field in order to select the active formats,
in order to make it work again.
While here, improve error messages.
Fixes: 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/atomisp_ioctl.c | 23 ++++++++++++++-----
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index a57e640fbf791..29826f8e4143d 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -773,7 +773,10 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
struct video_device *vdev = video_devdata(file);
struct atomisp_device *isp = video_get_drvdata(vdev);
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
- struct v4l2_subdev_mbus_code_enum code = { 0 };
+ struct v4l2_subdev_mbus_code_enum code = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+ struct v4l2_subdev *camera;
unsigned int i, fi = 0;
int rval;
@@ -783,14 +786,20 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
return -EINVAL;
}
+ camera = isp->inputs[asd->input_curr].camera;
+ if(!camera) {
+ dev_err(isp->dev, "%s(): camera is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
- rval = v4l2_subdev_call(isp->inputs[asd->input_curr].camera, pad,
- enum_mbus_code, NULL, &code);
+
+ rval = v4l2_subdev_call(camera, pad, enum_mbus_code, NULL, &code);
if (rval == -ENOIOCTLCMD) {
dev_warn(isp->dev,
- "enum_mbus_code pad op not supported. Please fix your sensor driver!\n");
- // rval = v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
- // video, enum_mbus_fmt, 0, &code.code);
+ "enum_mbus_code pad op not supported by %s. Please fix your sensor driver!\n",
+ camera->name);
}
rt_mutex_unlock(&isp->mutex);
@@ -820,6 +829,8 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
f->pixelformat = format->pixelformat;
return 0;
}
+ dev_err(isp->dev, "%s(): format for code %x not found.\n",
+ __func__, code.code);
return -EINVAL;
}
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit cb4d67a998e97365afdf34965b069601da1dae60 ]
The "power" pointer is not initialized on the else path and that would
lead to an Oops.
Link: https://lore.kernel.org/linux-media/20211012082150.GA31086@kili
Fixes: c30f4cb2d4c7 ("media: atomisp: Refactor PMIC detection to a separate function")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
index d8c9e31314b2e..62dc06e224765 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
@@ -481,7 +481,7 @@ fail:
static u8 gmin_get_pmic_id_and_addr(struct device *dev)
{
- struct i2c_client *power;
+ struct i2c_client *power = NULL;
static u8 pmic_i2c_addr;
if (pmic_id)
--
2.34.1
From: Jan Kara <[email protected]>
[ Upstream commit c65e6fd460b4df796ecd6ea22e132076ed1f2820 ]
Commit 7cc4ffc55564 ("block, bfq: put reqs of waker and woken in
dispatch list") added a condition to bfq_insert_request() which added
waker's requests directly to dispatch list. The rationale was that
completing waker's IO is needed to get more IO for the current queue.
Although this rationale is valid, there is a hole in it. The waker does
not necessarily serve the IO only for the current queue and maybe it's
current IO is not needed for current queue to make progress. Furthermore
injecting IO like this completely bypasses any service accounting within
bfq and thus we do not properly track how much service is waker's queue
getting or that the waker is actually doing any IO. Depending on the
conditions this can result in the waker getting too much or too few
service.
Consider for example the following job file:
[global]
directory=/mnt/repro/
rw=write
size=8g
time_based
runtime=30
ramp_time=10
blocksize=1m
direct=0
ioengine=sync
[slowwriter]
numjobs=1
prioclass=2
prio=7
fsync=200
[fastwriter]
numjobs=1
prioclass=2
prio=0
fsync=200
Despite processes have very different IO priorities, they get the same
about of service. The reason is that bfq identifies these processes as
having waker-wakee relationship and once that happens, IO from
fastwriter gets injected during slowwriter's time slice. As a result bfq
is not aware that fastwriter has any IO to do and constantly schedules
only slowwriter's queue. Thus fastwriter is forced to compete with
slowwriter's IO all the time instead of getting its share of time based
on IO priority.
Drop the special injection condition from bfq_insert_request(). As a
result, requests will be tracked and queued in a normal way and on next
dispatch bfq_select_queue() can decide whether the waker's inserted
requests should be injected during the current queue's timeslice or not.
Fixes: 7cc4ffc55564 ("block, bfq: put reqs of waker and woken in dispatch list")
Acked-by: Paolo Valente <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-iosched.c | 44 +-------------------------------------------
1 file changed, 1 insertion(+), 43 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 480e1a1348596..ea9a086d0498f 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -5991,48 +5991,7 @@ static void bfq_insert_request(struct blk_mq_hw_ctx *hctx, struct request *rq,
spin_lock_irq(&bfqd->lock);
bfqq = bfq_init_rq(rq);
-
- /*
- * Reqs with at_head or passthrough flags set are to be put
- * directly into dispatch list. Additional case for putting rq
- * directly into the dispatch queue: the only active
- * bfq_queues are bfqq and either its waker bfq_queue or one
- * of its woken bfq_queues. The rationale behind this
- * additional condition is as follows:
- * - consider a bfq_queue, say Q1, detected as a waker of
- * another bfq_queue, say Q2
- * - by definition of a waker, Q1 blocks the I/O of Q2, i.e.,
- * some I/O of Q1 needs to be completed for new I/O of Q2
- * to arrive. A notable example of waker is journald
- * - so, Q1 and Q2 are in any respect the queues of two
- * cooperating processes (or of two cooperating sets of
- * processes): the goal of Q1's I/O is doing what needs to
- * be done so that new Q2's I/O can finally be
- * issued. Therefore, if the service of Q1's I/O is delayed,
- * then Q2's I/O is delayed too. Conversely, if Q2's I/O is
- * delayed, the goal of Q1's I/O is hindered.
- * - as a consequence, if some I/O of Q1/Q2 arrives while
- * Q2/Q1 is the only queue in service, there is absolutely
- * no point in delaying the service of such an I/O. The
- * only possible result is a throughput loss
- * - so, when the above condition holds, the best option is to
- * have the new I/O dispatched as soon as possible
- * - the most effective and efficient way to attain the above
- * goal is to put the new I/O directly in the dispatch
- * list
- * - as an additional restriction, Q1 and Q2 must be the only
- * busy queues for this commit to put the I/O of Q2/Q1 in
- * the dispatch list. This is necessary, because, if also
- * other queues are waiting for service, then putting new
- * I/O directly in the dispatch list may evidently cause a
- * violation of service guarantees for the other queues
- */
- if (!bfqq ||
- (bfqq != bfqd->in_service_queue &&
- bfqd->in_service_queue != NULL &&
- bfq_tot_busy_queues(bfqd) == 1 + bfq_bfqq_busy(bfqq) &&
- (bfqq->waker_bfqq == bfqd->in_service_queue ||
- bfqd->in_service_queue->waker_bfqq == bfqq)) || at_head) {
+ if (!bfqq || at_head) {
if (at_head)
list_add(&rq->queuelist, &bfqd->dispatch);
else
@@ -6059,7 +6018,6 @@ static void bfq_insert_request(struct blk_mq_hw_ctx *hctx, struct request *rq,
* merge).
*/
cmd_flags = rq->cmd_flags;
-
spin_unlock_irq(&bfqd->lock);
bfq_update_insert_stats(q, bfqq, idle_timer_disabled,
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 9f6b4fa2d2dfbff4b8a57eeb39b1128a6094ee20 ]
Currently, the `port >= N_CSI_PORTS || err` checks for ISP2400 are always
evaluated as true because the err variable is set to `-EINVAL` on
declaration but the variable is never used until the evaluation.
Looking at the diff of commit 3c0538fbad9f ("media: atomisp: get rid of
most checks for ISP2401 version"), the `port >= N_CSI_PORTS` check is
for ISP2400 and the err variable check is for ISP2401. Fix this issue
by adding ISP version test there accordingly.
Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/sh_css_mipi.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
index 483d40a467c74..65fc93c5d56bc 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
@@ -430,7 +430,8 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
assert(port < N_CSI_PORTS);
- if (port >= N_CSI_PORTS || err) {
+ if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
+ (IS_ISP2401 && err)) {
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
"allocate_mipi_frames(%p) exit: error: port is not correct (port=%d).\n",
pipe, port);
@@ -559,7 +560,8 @@ free_mipi_frames(struct ia_css_pipe *pipe)
assert(port < N_CSI_PORTS);
- if (port >= N_CSI_PORTS || err) {
+ if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
+ (IS_ISP2401 && err)) {
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
"free_mipi_frames(%p, %d) exit: error: pipe port is not correct.\n",
pipe, port);
@@ -670,7 +672,8 @@ send_mipi_frames(struct ia_css_pipe *pipe)
assert(port < N_CSI_PORTS);
- if (port >= N_CSI_PORTS || err) {
+ if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
+ (IS_ISP2401 && err)) {
IA_CSS_ERROR("send_mipi_frames(%p) exit: invalid port specified (port=%d).\n",
pipe, port);
return err;
--
2.34.1
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit f5ff291098f70a70b344df1e388596755c3c8315 ]
In order to group sockets being connected using L2CAP_MODE_EXT_FLOWCTL
the pid is used but sk_peer_pid was not being initialized as it is
currently only done for af_unix.
Fixes: b48596d1dc25 ("Bluetooth: L2CAP: Add get_peer_pid callback")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 160c016a5dfb9..4574c5cb1b596 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -172,6 +172,21 @@ done:
return err;
}
+static void l2cap_sock_init_pid(struct sock *sk)
+{
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+
+ /* Only L2CAP_MODE_EXT_FLOWCTL ever need to access the PID in order to
+ * group the channels being requested.
+ */
+ if (chan->mode != L2CAP_MODE_EXT_FLOWCTL)
+ return;
+
+ spin_lock(&sk->sk_peer_lock);
+ sk->sk_peer_pid = get_pid(task_tgid(current));
+ spin_unlock(&sk->sk_peer_lock);
+}
+
static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
int alen, int flags)
{
@@ -243,6 +258,8 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
if (chan->psm && bdaddr_type_is_le(chan->src_type) && !chan->mode)
chan->mode = L2CAP_MODE_LE_FLOWCTL;
+ l2cap_sock_init_pid(sk);
+
err = l2cap_chan_connect(chan, la.l2_psm, __le16_to_cpu(la.l2_cid),
&la.l2_bdaddr, la.l2_bdaddr_type);
if (err)
@@ -298,6 +315,8 @@ static int l2cap_sock_listen(struct socket *sock, int backlog)
goto done;
}
+ l2cap_sock_init_pid(sk);
+
sk->sk_max_ack_backlog = backlog;
sk->sk_ack_backlog = 0;
--
2.34.1
From: Benjamin Li <[email protected]>
[ Upstream commit c9c5608fafe4dae975c9644c7d14c51ad3b0ed73 ]
status.band is used in determination of status.rate -- for 5GHz on legacy
rates there is a linear shift between the BD descriptor's rate field and
the wcn36xx driver's rate table (wcn_5ghz_rates).
We have a special clause to populate status.band for hardware scan offload
frames. However, this block occurs after status.rate is already populated.
Correctly handle this dependency by moving the band block before the rate
block.
This patch addresses kernel warnings & missing scan results for 5GHz APs
that send their beacons/probe responses at the higher four legacy rates
(24-54 Mbps), when using hardware scan offload:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4532 ieee80211_rx_napi+0x744/0x8d8
Modules linked in: wcn36xx [...]
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.107-g73909fa #1
Hardware name: Square, Inc. T2 (all variants) (DT)
Call trace:
dump_backtrace+0x0/0x148
show_stack+0x14/0x1c
dump_stack+0xb8/0xf0
__warn+0x2ac/0x2d8
warn_slowpath_null+0x44/0x54
ieee80211_rx_napi+0x744/0x8d8
ieee80211_tasklet_handler+0xa4/0xe0
tasklet_action_common+0xe0/0x118
tasklet_action+0x20/0x28
__do_softirq+0x108/0x1ec
irq_exit+0xd4/0xd8
__handle_domain_irq+0x84/0xbc
gic_handle_irq+0x4c/0xb8
el1_irq+0xe8/0x190
lpm_cpuidle_enter+0x220/0x260
cpuidle_enter_state+0x114/0x1c0
cpuidle_enter+0x34/0x48
do_idle+0x150/0x268
cpu_startup_entry+0x20/0x24
rest_init+0xd4/0xe0
start_kernel+0x398/0x430
---[ end trace ae28cb759352b403 ]---
Fixes: 8a27ca394782 ("wcn36xx: Correct band/freq reporting on RX")
Signed-off-by: Benjamin Li <[email protected]>
Tested-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 37 +++++++++++++------------
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index bbd7194c82e27..f76de106570d2 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -259,8 +259,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
fc = __le16_to_cpu(hdr->frame_control);
sn = IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl));
- status.freq = WCN36XX_CENTER_FREQ(wcn);
- status.band = WCN36XX_BAND(wcn);
status.mactime = 10;
status.signal = -get_rssi0(bd);
status.antenna = 1;
@@ -272,6 +270,25 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
wcn36xx_dbg(WCN36XX_DBG_RX, "status.flags=%x\n", status.flag);
+ if (bd->scan_learn) {
+ /* If packet originate from hardware scanning, extract the
+ * band/channel from bd descriptor.
+ */
+ u8 hwch = (bd->reserved0 << 4) + bd->rx_ch;
+
+ if (bd->rf_band != 1 && hwch <= sizeof(ab_rx_ch_map) && hwch >= 1) {
+ status.band = NL80211_BAND_5GHZ;
+ status.freq = ieee80211_channel_to_frequency(ab_rx_ch_map[hwch - 1],
+ status.band);
+ } else {
+ status.band = NL80211_BAND_2GHZ;
+ status.freq = ieee80211_channel_to_frequency(hwch, status.band);
+ }
+ } else {
+ status.band = WCN36XX_BAND(wcn);
+ status.freq = WCN36XX_CENTER_FREQ(wcn);
+ }
+
if (bd->rate_id < ARRAY_SIZE(wcn36xx_rate_table)) {
rate = &wcn36xx_rate_table[bd->rate_id];
status.encoding = rate->encoding;
@@ -298,22 +315,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
ieee80211_is_probe_resp(hdr->frame_control))
status.boottime_ns = ktime_get_boottime_ns();
- if (bd->scan_learn) {
- /* If packet originates from hardware scanning, extract the
- * band/channel from bd descriptor.
- */
- u8 hwch = (bd->reserved0 << 4) + bd->rx_ch;
-
- if (bd->rf_band != 1 && hwch <= sizeof(ab_rx_ch_map) && hwch >= 1) {
- status.band = NL80211_BAND_5GHZ;
- status.freq = ieee80211_channel_to_frequency(ab_rx_ch_map[hwch - 1],
- status.band);
- } else {
- status.band = NL80211_BAND_2GHZ;
- status.freq = ieee80211_channel_to_frequency(hwch, status.band);
- }
- }
-
memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
if (ieee80211_is_beacon(hdr->frame_control)) {
--
2.34.1
From: Christian Hewitt <[email protected]>
[ Upstream commit c019abb2feba3cbbd7cf7178f8e6499c4fa6fced ]
The absence of this binding appears to be harmless in Linux but it breaks
Ethernet support in mainline u-boot. So add the binding (which is present
in all other u-boot supported GXBB device-trees).
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 8e2af986cebaf..a4d34398da358 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
*/
#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
--
2.34.1
From: Christian Eggers <[email protected]>
commit f53d4c109a666bf1a4883b45d546fba079258717 upstream.
gpmi_io clock needs to be gated off when changing the parent/dividers of
enfc_clk_root (i.MX6Q/i.MX6UL) respectively qspi2_clk_root (i.MX6SX).
Otherwise this rate change can lead to an unresponsive GPMI core which
results in DMA timeouts and failed driver probe:
[ 4.072318] gpmi-nand 112000.gpmi-nand: DMA timeout, last DMA
...
[ 4.370355] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -110
...
[ 4.375988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[ 4.381524] gpmi-nand 112000.gpmi-nand: Error in ECC-based read: -22
[ 4.387988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[ 4.393535] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
...
Other than stated in i.MX 6 erratum ERR007117, it should be sufficient
to gate only gpmi_io because all other bch/nand clocks are derived from
different clock roots.
The i.MX6 reference manuals state that changing clock muxers can cause
glitches but are silent about changing dividers. But tests showed that
these glitches can definitely happen on i.MX6ULL. For i.MX7D/8MM in turn,
the manual guarantees that no glitches can happen when changing
dividers.
Co-developed-by: Stefan Riedmueller <[email protected]>
Signed-off-by: Stefan Riedmueller <[email protected]>
Signed-off-by: Christian Eggers <[email protected]>
Cc: [email protected]
Acked-by: Han Xu <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -713,14 +713,32 @@ static void gpmi_nfc_compute_timings(str
(use_half_period ? BM_GPMI_CTRL1_HALF_PERIOD : 0);
}
-static void gpmi_nfc_apply_timings(struct gpmi_nand_data *this)
+static int gpmi_nfc_apply_timings(struct gpmi_nand_data *this)
{
struct gpmi_nfc_hardware_timing *hw = &this->hw;
struct resources *r = &this->resources;
void __iomem *gpmi_regs = r->gpmi_regs;
unsigned int dll_wait_time_us;
+ int ret;
+
+ /* Clock dividers do NOT guarantee a clean clock signal on its output
+ * during the change of the divide factor on i.MX6Q/UL/SX. On i.MX7/8,
+ * all clock dividers provide these guarantee.
+ */
+ if (GPMI_IS_MX6Q(this) || GPMI_IS_MX6SX(this))
+ clk_disable_unprepare(r->clock[0]);
+
+ ret = clk_set_rate(r->clock[0], hw->clk_rate);
+ if (ret) {
+ dev_err(this->dev, "cannot set clock rate to %lu Hz: %d\n", hw->clk_rate, ret);
+ return ret;
+ }
- clk_set_rate(r->clock[0], hw->clk_rate);
+ if (GPMI_IS_MX6Q(this) || GPMI_IS_MX6SX(this)) {
+ ret = clk_prepare_enable(r->clock[0]);
+ if (ret)
+ return ret;
+ }
writel(hw->timing0, gpmi_regs + HW_GPMI_TIMING0);
writel(hw->timing1, gpmi_regs + HW_GPMI_TIMING1);
@@ -739,6 +757,8 @@ static void gpmi_nfc_apply_timings(struc
/* Wait for the DLL to settle. */
udelay(dll_wait_time_us);
+
+ return 0;
}
static int gpmi_setup_interface(struct nand_chip *chip, int chipnr,
@@ -2280,7 +2300,9 @@ static int gpmi_nfc_exec_op(struct nand_
*/
if (this->hw.must_apply_timings) {
this->hw.must_apply_timings = false;
- gpmi_nfc_apply_timings(this);
+ ret = gpmi_nfc_apply_timings(this);
+ if (ret)
+ return ret;
}
dev_dbg(this->dev, "%s: %d instructions\n", __func__, op->ninstrs);
From: Lyude Paul <[email protected]>
[ Upstream commit 646596485e1ed2182adf293dfd5aec4a96c46330 ]
As it turns out, apparently some machines will actually leave additional
backlight functionality like dynamic backlight control on before the OS
loads. Currently we don't take care to disable unsupported features when
writing back the backlight mode, which can lead to some rather strange
looking behavior when adjusting the backlight.
So, let's fix this by just not reading back the current backlight mode on
initial enable. I don't think there should really be any downsides to this,
and this will ensure we don't leave any unsupported functionality enabled.
This should fix at least one (but not all) of the issues seen with DPCD
backlight support on fi-bdw-samus
v5:
* Just avoid reading back DPCD register - Doug Anderson
Signed-off-by: Lyude Paul <[email protected]>
Fixes: 867cf9cd73c3 ("drm/dp: Extract i915's eDP backlight code into DRM helpers")
Reviewed-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_dp_helper.c | 40 ++++++++++-----------------------
1 file changed, 12 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 6d0f2c447f3b9..7bb24523a7493 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -3214,27 +3214,13 @@ int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backli
const u16 level)
{
int ret;
- u8 dpcd_buf, new_dpcd_buf;
+ u8 dpcd_buf = DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
- ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf);
- if (ret != 1) {
- drm_dbg_kms(aux->drm_dev,
- "%s: Failed to read backlight mode: %d\n", aux->name, ret);
- return ret < 0 ? ret : -EIO;
- }
-
- new_dpcd_buf = dpcd_buf;
-
- if ((dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) != DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
- new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
- new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
-
- if (bl->pwmgen_bit_count) {
- ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, bl->pwmgen_bit_count);
- if (ret != 1)
- drm_dbg_kms(aux->drm_dev, "%s: Failed to write aux pwmgen bit count: %d\n",
- aux->name, ret);
- }
+ if (bl->pwmgen_bit_count) {
+ ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, bl->pwmgen_bit_count);
+ if (ret != 1)
+ drm_dbg_kms(aux->drm_dev, "%s: Failed to write aux pwmgen bit count: %d\n",
+ aux->name, ret);
}
if (bl->pwm_freq_pre_divider) {
@@ -3244,16 +3230,14 @@ int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backli
"%s: Failed to write aux backlight frequency: %d\n",
aux->name, ret);
else
- new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
+ dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
}
- if (new_dpcd_buf != dpcd_buf) {
- ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf);
- if (ret != 1) {
- drm_dbg_kms(aux->drm_dev, "%s: Failed to write aux backlight mode: %d\n",
- aux->name, ret);
- return ret < 0 ? ret : -EIO;
- }
+ ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf);
+ if (ret != 1) {
+ drm_dbg_kms(aux->drm_dev, "%s: Failed to write aux backlight mode: %d\n",
+ aux->name, ret);
+ return ret < 0 ? ret : -EIO;
}
ret = drm_edp_backlight_set_level(aux, bl, level);
--
2.34.1
From: Sven Eckelmann <[email protected]>
[ Upstream commit 086c921a354089f209318501038d43c98d3f409f ]
Some ETSI countries have a small overlap in the wireless-regdb with an ETSI
channel (5590-5650). A good example is Australia:
country AU: DFS-ETSI
(2400 - 2483.5 @ 40), (36)
(5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (20), NO-OUTDOOR, AUTO-BW, DFS
(5470 - 5600 @ 80), (27), DFS
(5650 - 5730 @ 80), (27), DFS
(5730 - 5850 @ 80), (36)
(57000 - 66000 @ 2160), (43), NO-OUTDOOR
If the firmware (or the BDF) is shipped with these rules then there is only
a 10 MHz overlap with the weather radar:
* below: 5470 - 5590
* weather radar: 5590 - 5600
* above: (none for the rule "5470 - 5600 @ 80")
There are several wrong assumption in the ath11k code:
* there is always a valid range below the weather radar
(actually: there could be no range below the weather radar range OR range
could be smaller than 20 MHz)
* intersected range in the weather radar range is valid
(actually: the range could be smaller than 20 MHz)
* range above weather radar is either empty or valid
(actually: the range could be smaller than 20 MHz)
These wrong assumption will lead in this example to a rule
(5590 - 5600 @ 20), (N/A, 27), (600000 ms), DFS, AUTO-BW
which is invalid according to is_valid_reg_rule() because the freq_diff is
only 10 MHz but the max_bandwidth is set to 20 MHz. Which results in a
rejection like:
WARNING: at backports-20210222_001-4.4.60-b157d2276/net/wireless/reg.c:3984
[...]
Call trace:
[<ffffffbffc3d2e50>] reg_get_max_bandwidth+0x300/0x3a8 [cfg80211]
[<ffffffbffc3d3d0c>] regulatory_set_wiphy_regd_sync+0x3c/0x98 [cfg80211]
[<ffffffbffc651598>] ath11k_regd_update+0x1a8/0x210 [ath11k]
[<ffffffbffc652108>] ath11k_regd_update_work+0x18/0x20 [ath11k]
[<ffffffc0000a93e0>] process_one_work+0x1f8/0x340
[<ffffffc0000a9784>] worker_thread+0x25c/0x448
[<ffffffc0000aedc8>] kthread+0xd0/0xd8
[<ffffffc000085550>] ret_from_fork+0x10/0x40
ath11k c000000.wifi: failed to perform regd update : -22
Invalid regulatory domain detected
To avoid this, the algorithm has to be changed slightly. Instead of
splitting a rule which overlaps with the weather radar range into 3 pieces
and accepting the first two parts blindly, it must actually be checked for
each piece whether it is a valid range. And only if it is valid, add it to
the output array.
When these checks are in place, the processed rules for AU would end up as
country AU: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 36), (N/A)
(5150 - 5250 @ 80), (6, 23), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (6, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5590 @ 80), (6, 27), (0 ms), DFS, AUTO-BW
(5650 - 5730 @ 80), (6, 27), (0 ms), DFS, AUTO-BW
(5730 - 5850 @ 80), (6, 36), (N/A), AUTO-BW
and will be accepted by the wireless regulatory code.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/reg.c | 103 ++++++++++++++------------
1 file changed, 56 insertions(+), 47 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 92c59009a8ac2..f793324ad0b73 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -459,6 +459,9 @@ ath11k_reg_adjust_bw(u16 start_freq, u16 end_freq, u16 max_bw)
{
u16 bw;
+ if (end_freq <= start_freq)
+ return 0;
+
bw = end_freq - start_freq;
bw = min_t(u16, bw, max_bw);
@@ -466,8 +469,10 @@ ath11k_reg_adjust_bw(u16 start_freq, u16 end_freq, u16 max_bw)
bw = 80;
else if (bw >= 40 && bw < 80)
bw = 40;
- else if (bw < 40)
+ else if (bw >= 20 && bw < 40)
bw = 20;
+ else
+ bw = 0;
return bw;
}
@@ -491,73 +496,77 @@ ath11k_reg_update_weather_radar_band(struct ath11k_base *ab,
struct cur_reg_rule *reg_rule,
u8 *rule_idx, u32 flags, u16 max_bw)
{
+ u32 start_freq;
u32 end_freq;
u16 bw;
u8 i;
i = *rule_idx;
+ /* there might be situations when even the input rule must be dropped */
+ i--;
+
+ /* frequencies below weather radar */
bw = ath11k_reg_adjust_bw(reg_rule->start_freq,
ETSI_WEATHER_RADAR_BAND_LOW, max_bw);
+ if (bw > 0) {
+ i++;
- ath11k_reg_update_rule(regd->reg_rules + i, reg_rule->start_freq,
- ETSI_WEATHER_RADAR_BAND_LOW, bw,
- reg_rule->ant_gain, reg_rule->reg_power,
- flags);
+ ath11k_reg_update_rule(regd->reg_rules + i,
+ reg_rule->start_freq,
+ ETSI_WEATHER_RADAR_BAND_LOW, bw,
+ reg_rule->ant_gain, reg_rule->reg_power,
+ flags);
- ath11k_dbg(ab, ATH11K_DBG_REG,
- "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
- i + 1, reg_rule->start_freq, ETSI_WEATHER_RADAR_BAND_LOW,
- bw, reg_rule->ant_gain, reg_rule->reg_power,
- regd->reg_rules[i].dfs_cac_ms,
- flags);
-
- if (reg_rule->end_freq > ETSI_WEATHER_RADAR_BAND_HIGH)
- end_freq = ETSI_WEATHER_RADAR_BAND_HIGH;
- else
- end_freq = reg_rule->end_freq;
+ ath11k_dbg(ab, ATH11K_DBG_REG,
+ "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+ i + 1, reg_rule->start_freq,
+ ETSI_WEATHER_RADAR_BAND_LOW, bw, reg_rule->ant_gain,
+ reg_rule->reg_power, regd->reg_rules[i].dfs_cac_ms,
+ flags);
+ }
- bw = ath11k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_LOW, end_freq,
- max_bw);
+ /* weather radar frequencies */
+ start_freq = max_t(u32, reg_rule->start_freq,
+ ETSI_WEATHER_RADAR_BAND_LOW);
+ end_freq = min_t(u32, reg_rule->end_freq, ETSI_WEATHER_RADAR_BAND_HIGH);
- i++;
+ bw = ath11k_reg_adjust_bw(start_freq, end_freq, max_bw);
+ if (bw > 0) {
+ i++;
- ath11k_reg_update_rule(regd->reg_rules + i,
- ETSI_WEATHER_RADAR_BAND_LOW, end_freq, bw,
- reg_rule->ant_gain, reg_rule->reg_power,
- flags);
+ ath11k_reg_update_rule(regd->reg_rules + i, start_freq,
+ end_freq, bw, reg_rule->ant_gain,
+ reg_rule->reg_power, flags);
- regd->reg_rules[i].dfs_cac_ms = ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT;
+ regd->reg_rules[i].dfs_cac_ms = ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT;
- ath11k_dbg(ab, ATH11K_DBG_REG,
- "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
- i + 1, ETSI_WEATHER_RADAR_BAND_LOW, end_freq,
- bw, reg_rule->ant_gain, reg_rule->reg_power,
- regd->reg_rules[i].dfs_cac_ms,
- flags);
-
- if (end_freq == reg_rule->end_freq) {
- regd->n_reg_rules--;
- *rule_idx = i;
- return;
+ ath11k_dbg(ab, ATH11K_DBG_REG,
+ "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+ i + 1, start_freq, end_freq, bw,
+ reg_rule->ant_gain, reg_rule->reg_power,
+ regd->reg_rules[i].dfs_cac_ms, flags);
}
+ /* frequencies above weather radar */
bw = ath11k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_HIGH,
reg_rule->end_freq, max_bw);
+ if (bw > 0) {
+ i++;
- i++;
-
- ath11k_reg_update_rule(regd->reg_rules + i, ETSI_WEATHER_RADAR_BAND_HIGH,
- reg_rule->end_freq, bw,
- reg_rule->ant_gain, reg_rule->reg_power,
- flags);
+ ath11k_reg_update_rule(regd->reg_rules + i,
+ ETSI_WEATHER_RADAR_BAND_HIGH,
+ reg_rule->end_freq, bw,
+ reg_rule->ant_gain, reg_rule->reg_power,
+ flags);
- ath11k_dbg(ab, ATH11K_DBG_REG,
- "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
- i + 1, ETSI_WEATHER_RADAR_BAND_HIGH, reg_rule->end_freq,
- bw, reg_rule->ant_gain, reg_rule->reg_power,
- regd->reg_rules[i].dfs_cac_ms,
- flags);
+ ath11k_dbg(ab, ATH11K_DBG_REG,
+ "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+ i + 1, ETSI_WEATHER_RADAR_BAND_HIGH,
+ reg_rule->end_freq, bw, reg_rule->ant_gain,
+ reg_rule->reg_power, regd->reg_rules[i].dfs_cac_ms,
+ flags);
+ }
*rule_idx = i;
}
--
2.34.1
From: Eugen Hristev <[email protected]>
[ Upstream commit da653498c20ba5b185214d8ae43b4e8e9594f520 ]
pm_runtime_resume_and_get should be called when the s_frame_interval
is called.
The driver will try to access device registers to configure VMAX, coarse
time and exposure.
Currently if the runtime is not resumed, this fails:
# media-ctl -d /dev/media0 --set-v4l2 '"IMX274 1-001a":0[fmt:SRGGB10_1X10/3840x2
160@1/10]'
IMX274 1-001a: imx274_binning_goodness: ask 3840x2160, size 3840x2160, goodness 0
IMX274 1-001a: imx274_binning_goodness: ask 3840x2160, size 1920x1080, goodness -3000
IMX274 1-001a: imx274_binning_goodness: ask 3840x2160, size 1280x720, goodness -4000
IMX274 1-001a: imx274_binning_goodness: ask 3840x2160, size 1280x540, goodness -4180
IMX274 1-001a: __imx274_change_compose: selected 1x1 binning
IMX274 1-001a: imx274_set_frame_interval: input frame interval = 1 / 10
IMX274 1-001a: imx274_read_mbreg : addr 0x300e, val=0x1 (2 bytes)
IMX274 1-001a: imx274_set_frame_interval : register SVR = 1
IMX274 1-001a: imx274_read_mbreg : addr 0x30f6, val=0x6a8 (2 bytes)
IMX274 1-001a: imx274_set_frame_interval : register HMAX = 1704
IMX274 1-001a: imx274_set_frame_length : input length = 2112
IMX274 1-001a: imx274_write_mbreg : i2c bulk write failed, 30f8 = 884 (3 bytes)
IMX274 1-001a: imx274_set_frame_length error = -121
IMX274 1-001a: imx274_set_frame_interval error = -121
Unable to setup formats: Remote I/O error (121)
The device is not resumed thus the remote I/O error.
Setting the frame interval works at streaming time, because
pm_runtime_resume_and_get is called at s_stream time before sensor setup.
The failure happens when only the s_frame_interval is called separately
independently on streaming time.
Fixes: ad97bc37426c ("media: i2c: imx274: Add IMX274 power on and off sequence")
Signed-off-by: Eugen Hristev <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/imx274.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/media/i2c/imx274.c b/drivers/media/i2c/imx274.c
index 0dce92872176d..4d9b64c61f603 100644
--- a/drivers/media/i2c/imx274.c
+++ b/drivers/media/i2c/imx274.c
@@ -1367,6 +1367,10 @@ static int imx274_s_frame_interval(struct v4l2_subdev *sd,
int min, max, def;
int ret;
+ ret = pm_runtime_resume_and_get(&imx274->client->dev);
+ if (ret < 0)
+ return ret;
+
mutex_lock(&imx274->lock);
ret = imx274_set_frame_interval(imx274, fi->interval);
@@ -1398,6 +1402,7 @@ static int imx274_s_frame_interval(struct v4l2_subdev *sd,
unlock:
mutex_unlock(&imx274->lock);
+ pm_runtime_put(&imx274->client->dev);
return ret;
}
--
2.34.1
From: Sakari Ailus <[email protected]>
commit cbe0b3af73bf72fad197756f026084404e2bcdc7 upstream.
If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.
Fix this by disabling only clocks and regulators that were enabled
previously.
Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Cc: [email protected]
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/ov8865.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -2330,27 +2330,27 @@ static int ov8865_sensor_power(struct ov
if (ret) {
dev_err(sensor->dev,
"failed to enable DOVDD regulator\n");
- goto disable;
+ return ret;
}
ret = regulator_enable(sensor->avdd);
if (ret) {
dev_err(sensor->dev,
"failed to enable AVDD regulator\n");
- goto disable;
+ goto disable_dovdd;
}
ret = regulator_enable(sensor->dvdd);
if (ret) {
dev_err(sensor->dev,
"failed to enable DVDD regulator\n");
- goto disable;
+ goto disable_avdd;
}
ret = clk_prepare_enable(sensor->extclk);
if (ret) {
dev_err(sensor->dev, "failed to enable EXTCLK clock\n");
- goto disable;
+ goto disable_dvdd;
}
gpiod_set_value_cansleep(sensor->reset, 0);
@@ -2359,14 +2359,16 @@ static int ov8865_sensor_power(struct ov
/* Time to enter streaming mode according to power timings. */
usleep_range(10000, 12000);
} else {
-disable:
gpiod_set_value_cansleep(sensor->powerdown, 1);
gpiod_set_value_cansleep(sensor->reset, 1);
clk_disable_unprepare(sensor->extclk);
+disable_dvdd:
regulator_disable(sensor->dvdd);
+disable_avdd:
regulator_disable(sensor->avdd);
+disable_dovdd:
regulator_disable(sensor->dovdd);
}
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 8cb125566c40b7141d8842c534f0ea5820ee3d5c ]
glob_syms array wasn't freed on bpf_link__free(). Fix that.
Fixes: a46349227cd8 ("libbpf: Add linker extern resolution support for functions and global variables")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/linker.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/lib/bpf/linker.c b/tools/lib/bpf/linker.c
index 2df880cefdaee..84095a2c2ef2a 100644
--- a/tools/lib/bpf/linker.c
+++ b/tools/lib/bpf/linker.c
@@ -211,6 +211,7 @@ void bpf_linker__free(struct bpf_linker *linker)
}
free(linker->secs);
+ free(linker->glob_syms);
free(linker);
}
--
2.34.1
From: Johan Hovold <[email protected]>
commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: [email protected] # 2.6.18
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -1467,7 +1467,7 @@ static int pvr2_upload_firmware1(struct
for (address = 0; address < fwsize; address += 0x800) {
memcpy(fw_ptr, fw_entry->data + address, 0x800);
ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address,
- 0, fw_ptr, 0x800, HZ);
+ 0, fw_ptr, 0x800, 1000);
}
trace_firmware("Upload done, releasing device's CPU");
@@ -1605,7 +1605,7 @@ int pvr2_upload_firmware2(struct pvr2_hd
((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]);
ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt,
- &actual_length, HZ);
+ &actual_length, 1000);
ret |= (actual_length != bcnt);
if (ret) break;
fw_done += bcnt;
@@ -3438,7 +3438,7 @@ void pvr2_hdw_cpufw_set_enabled(struct p
0xa0,0xc0,
address,0,
hdw->fw_buffer+address,
- 0x800,HZ);
+ 0x800,1000);
if (ret < 0) break;
}
@@ -3977,7 +3977,7 @@ void pvr2_hdw_cpureset_assert(struct pvr
/* Write the CPUCS register on the 8051. The lsb of the register
is the reset bit; a 1 asserts reset while a 0 clears it. */
pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
- ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,HZ);
+ ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,1000);
if (ret < 0) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
"cpureset_assert(%d) error=%d",val,ret);
From: Baoquan He <[email protected]>
commit a674e48c5443d12a8a43c3ac42367aa39505d506 upstream.
Currently three dma atomic pools are initialized as long as the relevant
kernel codes are built in. While in kdump kernel of x86_64, this is not
right when trying to create atomic_pool_dma, because there's no managed
pages in DMA zone. In the case, DMA zone only has low 1M memory
presented and locked down by memblock allocator. So no pages are added
into buddy of DMA zone. Please check commit f1d4d47c5851 ("x86/setup:
Always reserve the first 1M of RAM").
Then in kdump kernel of x86_64, it always prints below failure message:
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-0.rc5.20210611git929d931f2b40.42.fc35.x86_64 #1
Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.12.0 06/04/2018
Call Trace:
dump_stack+0x7f/0xa1
warn_alloc.cold+0x72/0xd6
__alloc_pages_slowpath.constprop.0+0xf29/0xf50
__alloc_pages+0x24d/0x2c0
alloc_page_interleave+0x13/0xb0
atomic_pool_expand+0x118/0x210
__dma_atomic_pool_init+0x45/0x93
dma_atomic_pool_init+0xdb/0x176
do_one_initcall+0x67/0x320
kernel_init_freeable+0x290/0x2dc
kernel_init+0xa/0x111
ret_from_fork+0x22/0x30
Mem-Info:
......
DMA: failed to allocate 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Here, let's check if DMA zone has managed pages, then create
atomic_pool_dma if yes. Otherwise just skip it.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: John Donnelly <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Laight <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/dma/pool.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -203,7 +203,7 @@ static int __init dma_atomic_pool_init(v
GFP_KERNEL);
if (!atomic_pool_kernel)
ret = -ENOMEM;
- if (IS_ENABLED(CONFIG_ZONE_DMA)) {
+ if (has_managed_dma()) {
atomic_pool_dma = __dma_atomic_pool_init(atomic_pool_size,
GFP_KERNEL | GFP_DMA);
if (!atomic_pool_dma)
@@ -226,7 +226,7 @@ static inline struct gen_pool *dma_guess
if (prev == NULL) {
if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp & GFP_DMA32))
return atomic_pool_dma32;
- if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp & GFP_DMA))
+ if (atomic_pool_dma && (gfp & GFP_DMA))
return atomic_pool_dma;
return atomic_pool_kernel;
}
From: Jammy Huang <[email protected]>
[ Upstream commit 62cea52ad4bead0ae4be2cfe1142eb0aae0e9fbd ]
aspeed_video_get_resolution() will try to do res-detect again if the
timing got in last try is invalid. But it will always time out because
VE_SEQ_CTRL_TRIG_MODE_DET is only cleared after 1st mode-detect.
To fix the problem, just clear VE_SEQ_CTRL_TRIG_MODE_DET before setting
it in aspeed_video_enable_mode_detect().
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
Acked-by: Paul Menzel <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/aspeed-video.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 7bb6babdcade0..23c41c545c536 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -500,6 +500,10 @@ static void aspeed_video_enable_mode_detect(struct aspeed_video *video)
aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
VE_INTERRUPT_MODE_DETECT);
+ /* Disable mode detect in order to re-trigger */
+ aspeed_video_update(video, VE_SEQ_CTRL,
+ VE_SEQ_CTRL_TRIG_MODE_DET, 0);
+
/* Trigger mode detect */
aspeed_video_update(video, VE_SEQ_CTRL, 0, VE_SEQ_CTRL_TRIG_MODE_DET);
}
@@ -786,10 +790,6 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
return;
}
- /* Disable mode detect in order to re-trigger */
- aspeed_video_update(video, VE_SEQ_CTRL,
- VE_SEQ_CTRL_TRIG_MODE_DET, 0);
-
aspeed_video_check_and_set_polarity(video);
aspeed_video_enable_mode_detect(video);
--
2.34.1
From: Chao Yu <[email protected]>
commit 77900c45ee5cd5da63bd4d818a41dbdf367e81cd upstream.
In fuzzed image, SSA table may indicate that a data block belongs to
invalid node, which node ID is out-of-range (0, 1, 2 or max_nid), in
order to avoid migrating inconsistent data in such corrupted image,
let's do sanity check anyway before data block migration.
Cc: [email protected]
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/gc.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1023,6 +1023,9 @@ static bool is_alive(struct f2fs_sb_info
set_sbi_flag(sbi, SBI_NEED_FSCK);
}
+ if (f2fs_check_nid_range(sbi, dni->ino))
+ return false;
+
*nofs = ofs_of_node(node_page);
source_blkaddr = data_blkaddr(NULL, node_page, ofs_in_node);
f2fs_put_page(node_page, 1);
From: Namjae Jeon <[email protected]>
commit b589f5db6d4af8f14d70e31e1276b4c017668a26 upstream.
If the client ignores the CreditResponse received from the server and
continues to send the request, ksmbd limits the requests if it exceeds
smb2 max credits.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ksmbd/connection.c | 1 +
fs/ksmbd/connection.h | 3 ++-
fs/ksmbd/smb2misc.c | 9 +++++++++
fs/ksmbd/smb2pdu.c | 1 +
4 files changed, 13 insertions(+), 1 deletion(-)
--- a/fs/ksmbd/connection.c
+++ b/fs/ksmbd/connection.c
@@ -62,6 +62,7 @@ struct ksmbd_conn *ksmbd_conn_alloc(void
atomic_set(&conn->req_running, 0);
atomic_set(&conn->r_count, 0);
conn->total_credits = 1;
+ conn->outstanding_credits = 1;
init_waitqueue_head(&conn->req_running_q);
INIT_LIST_HEAD(&conn->conns_list);
--- a/fs/ksmbd/connection.h
+++ b/fs/ksmbd/connection.h
@@ -61,7 +61,8 @@ struct ksmbd_conn {
atomic_t req_running;
/* References which are made for this Server object*/
atomic_t r_count;
- unsigned short total_credits;
+ unsigned int total_credits;
+ unsigned int outstanding_credits;
spinlock_t credits_lock;
wait_queue_head_t req_running_q;
/* Lock to protect requests list*/
--- a/fs/ksmbd/smb2misc.c
+++ b/fs/ksmbd/smb2misc.c
@@ -338,7 +338,16 @@ static int smb2_validate_credit_charge(s
credit_charge, conn->total_credits);
ret = 1;
}
+
+ if ((u64)conn->outstanding_credits + credit_charge > conn->vals->max_credits) {
+ ksmbd_debug(SMB, "Limits exceeding the maximum allowable outstanding requests, given : %u, pending : %u\n",
+ credit_charge, conn->outstanding_credits);
+ ret = 1;
+ } else
+ conn->outstanding_credits += credit_charge;
+
spin_unlock(&conn->credits_lock);
+
return ret;
}
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -324,6 +324,7 @@ int smb2_set_rsp_credits(struct ksmbd_wo
}
conn->total_credits -= credit_charge;
+ conn->outstanding_credits -= credit_charge;
credits_requested = max_t(unsigned short,
le16_to_cpu(req_hdr->CreditRequest), 1);
From: Jason Gerecke <[email protected]>
commit 20f3cf5f860f9f267a6a6e5642d3d0525edb1814 upstream.
If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.
This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.
Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase)
CC: [email protected]
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2682,6 +2682,10 @@ static void wacom_wac_finger_pre_report(
hid_data->confidence = true;
+ hid_data->cc_report = 0;
+ hid_data->cc_index = -1;
+ hid_data->cc_value_index = -1;
+
for (i = 0; i < report->maxfield; i++) {
struct hid_field *field = report->field[i];
int j;
From: oujiefeng <[email protected]>
[ Upstream commit 40fafc8eca3f0d41b9dade5c10afb2dad723aad7 ]
Change the debugfs directory name from hisi_spi65535 to hisi_spi0.
Fixes: 2b2142f247eb ("spi: hisi-kunpeng: Add debugfs support")
Signed-off-by: oujiefeng <[email protected]>
Signed-off-by: Jay Fang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-hisi-kunpeng.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi-hisi-kunpeng.c b/drivers/spi/spi-hisi-kunpeng.c
index 58b823a16fc4d..525cc0143a305 100644
--- a/drivers/spi/spi-hisi-kunpeng.c
+++ b/drivers/spi/spi-hisi-kunpeng.c
@@ -127,7 +127,6 @@ struct hisi_spi {
void __iomem *regs;
int irq;
u32 fifo_len; /* depth of the FIFO buffer */
- u16 bus_num;
/* Current message transfer state info */
const void *tx;
@@ -165,7 +164,10 @@ static int hisi_spi_debugfs_init(struct hisi_spi *hs)
{
char name[32];
- snprintf(name, 32, "hisi_spi%d", hs->bus_num);
+ struct spi_controller *master;
+
+ master = container_of(hs->dev, struct spi_controller, dev);
+ snprintf(name, 32, "hisi_spi%d", master->bus_num);
hs->debugfs = debugfs_create_dir(name, NULL);
if (!hs->debugfs)
return -ENOMEM;
@@ -467,7 +469,6 @@ static int hisi_spi_probe(struct platform_device *pdev)
hs = spi_controller_get_devdata(master);
hs->dev = dev;
hs->irq = irq;
- hs->bus_num = pdev->id;
hs->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hs->regs))
@@ -490,7 +491,7 @@ static int hisi_spi_probe(struct platform_device *pdev)
master->use_gpio_descriptors = true;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
- master->bus_num = hs->bus_num;
+ master->bus_num = pdev->id;
master->setup = hisi_spi_setup;
master->cleanup = hisi_spi_cleanup;
master->transfer_one = hisi_spi_transfer_one;
@@ -506,15 +507,15 @@ static int hisi_spi_probe(struct platform_device *pdev)
return ret;
}
- if (hisi_spi_debugfs_init(hs))
- dev_info(dev, "failed to create debugfs dir\n");
-
ret = spi_register_controller(master);
if (ret) {
dev_err(dev, "failed to register spi master, ret=%d\n", ret);
return ret;
}
+ if (hisi_spi_debugfs_init(hs))
+ dev_info(dev, "failed to create debugfs dir\n");
+
dev_info(dev, "hw version:0x%x max-freq:%u kHz\n",
readl(hs->regs + HISI_SPI_VERSION),
master->max_speed_hz / 1000);
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 230d683ae04894933720425c8dead9508a09ebc3 ]
The JPEG encoder found in the Hantro H1 encoder block only produces a
raw entropy-encoded scan. The driver is responsible for building a JPEG
compliant bitstream and placing the entropy-encoded scan in it. Right
now the driver uses a bounce buffer for the hardware to output the raw
scan to.
In commit e765dba11ec2 ("hantro: Move hantro_enc_buf_finish to JPEG
codec_ops.done"), the code that copies the raw scan from the bounce
buffer to the capture buffer was moved, but was only hooked up for the
Hantro H1 (then RK3288) variant. The RK3399 variant was broken,
producing a JPEG bitstream without the scan, and the capture buffer's
.bytesused field unset.
Fix this by duplicating the code that is executed when the JPEG encoder
finishes encoding a frame. As the encoded length is read back from
hardware, and the variants having different register layouts, the
code is duplicated rather than shared.
Fixes: e765dba11ec2 ("hantro: Move hantro_enc_buf_finish to JPEG codec_ops.done")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Tested-by: Nicolas Dufresne <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/hantro/hantro_h1_jpeg_enc.c | 2 +-
drivers/staging/media/hantro/hantro_hw.h | 3 ++-
.../media/hantro/rockchip_vpu2_hw_jpeg_enc.c | 17 +++++++++++++++++
drivers/staging/media/hantro/rockchip_vpu_hw.c | 5 +++--
4 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c b/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
index 56cf261a8e958..9cd713c02a455 100644
--- a/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
+++ b/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
@@ -140,7 +140,7 @@ int hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx)
return 0;
}
-void hantro_jpeg_enc_done(struct hantro_ctx *ctx)
+void hantro_h1_jpeg_enc_done(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
u32 bytesused = vepu_read(vpu, H1_REG_STR_BUF_LIMIT) / 8;
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index df7b5e3a57b9b..fd738653a5735 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -235,7 +235,8 @@ int hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx);
int rockchip_vpu2_jpeg_enc_run(struct hantro_ctx *ctx);
int hantro_jpeg_enc_init(struct hantro_ctx *ctx);
void hantro_jpeg_enc_exit(struct hantro_ctx *ctx);
-void hantro_jpeg_enc_done(struct hantro_ctx *ctx);
+void hantro_h1_jpeg_enc_done(struct hantro_ctx *ctx);
+void rockchip_vpu2_jpeg_enc_done(struct hantro_ctx *ctx);
dma_addr_t hantro_h264_get_ref_buf(struct hantro_ctx *ctx,
unsigned int dpb_idx);
diff --git a/drivers/staging/media/hantro/rockchip_vpu2_hw_jpeg_enc.c b/drivers/staging/media/hantro/rockchip_vpu2_hw_jpeg_enc.c
index 991213ce16108..5d9ff420f0b5f 100644
--- a/drivers/staging/media/hantro/rockchip_vpu2_hw_jpeg_enc.c
+++ b/drivers/staging/media/hantro/rockchip_vpu2_hw_jpeg_enc.c
@@ -171,3 +171,20 @@ int rockchip_vpu2_jpeg_enc_run(struct hantro_ctx *ctx)
return 0;
}
+
+void rockchip_vpu2_jpeg_enc_done(struct hantro_ctx *ctx)
+{
+ struct hantro_dev *vpu = ctx->dev;
+ u32 bytesused = vepu_read(vpu, VEPU_REG_STR_BUF_LIMIT) / 8;
+ struct vb2_v4l2_buffer *dst_buf = hantro_get_dst_buf(ctx);
+
+ /*
+ * TODO: Rework the JPEG encoder to eliminate the need
+ * for a bounce buffer.
+ */
+ memcpy(vb2_plane_vaddr(&dst_buf->vb2_buf, 0) +
+ ctx->vpu_dst_fmt->header_size,
+ ctx->jpeg_enc.bounce_buffer.cpu, bytesused);
+ vb2_set_plane_payload(&dst_buf->vb2_buf, 0,
+ ctx->vpu_dst_fmt->header_size + bytesused);
+}
diff --git a/drivers/staging/media/hantro/rockchip_vpu_hw.c b/drivers/staging/media/hantro/rockchip_vpu_hw.c
index d4f52957cc534..0c22039162a00 100644
--- a/drivers/staging/media/hantro/rockchip_vpu_hw.c
+++ b/drivers/staging/media/hantro/rockchip_vpu_hw.c
@@ -343,7 +343,7 @@ static const struct hantro_codec_ops rk3066_vpu_codec_ops[] = {
.run = hantro_h1_jpeg_enc_run,
.reset = rockchip_vpu1_enc_reset,
.init = hantro_jpeg_enc_init,
- .done = hantro_jpeg_enc_done,
+ .done = hantro_h1_jpeg_enc_done,
.exit = hantro_jpeg_enc_exit,
},
[HANTRO_MODE_H264_DEC] = {
@@ -371,7 +371,7 @@ static const struct hantro_codec_ops rk3288_vpu_codec_ops[] = {
.run = hantro_h1_jpeg_enc_run,
.reset = rockchip_vpu1_enc_reset,
.init = hantro_jpeg_enc_init,
- .done = hantro_jpeg_enc_done,
+ .done = hantro_h1_jpeg_enc_done,
.exit = hantro_jpeg_enc_exit,
},
[HANTRO_MODE_H264_DEC] = {
@@ -399,6 +399,7 @@ static const struct hantro_codec_ops rk3399_vpu_codec_ops[] = {
.run = rockchip_vpu2_jpeg_enc_run,
.reset = rockchip_vpu2_enc_reset,
.init = hantro_jpeg_enc_init,
+ .done = rockchip_vpu2_jpeg_enc_done,
.exit = hantro_jpeg_enc_exit,
},
[HANTRO_MODE_H264_DEC] = {
--
2.34.1
From: Sean Wang <[email protected]>
[ Upstream commit 561ae1d46a8ddcbc13162d5771f5ed6c8249e730 ]
btmtksdio have to rely on MMC_PM_KEEP_POWER in pm_flags to avoid that
SDIO power is being shut off during the device is in suspend. That fixes
the SDIO command fails to access the bus after the device is resumed.
Fixes: 7f3c563c575e7 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth")
Co-developed-by: Mark-yw Chen <[email protected]>
Signed-off-by: Mark-yw Chen <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btmtksdio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 9872ef18f9fea..1cbdeca1fdc4a 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -1042,6 +1042,8 @@ static int btmtksdio_runtime_suspend(struct device *dev)
if (!bdev)
return 0;
+ sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+
sdio_claim_host(bdev->func);
sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, &err);
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 593835377f24ca1bb98008ec1dc3baefe491ad6e ]
add_dst_sec() can invalidate bpf_linker's section index making
dst_symtab pointer pointing into unallocated memory. Reinitialize
dst_symtab pointer on each iteration to make sure it's always valid.
Fixes: faf6ed321cf6 ("libbpf: Add BPF static linker APIs")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/linker.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/lib/bpf/linker.c b/tools/lib/bpf/linker.c
index 84095a2c2ef2a..6b2f59ddb6918 100644
--- a/tools/lib/bpf/linker.c
+++ b/tools/lib/bpf/linker.c
@@ -2001,7 +2001,7 @@ add_sym:
static int linker_append_elf_relos(struct bpf_linker *linker, struct src_obj *obj)
{
struct src_sec *src_symtab = &obj->secs[obj->symtab_sec_idx];
- struct dst_sec *dst_symtab = &linker->secs[linker->symtab_sec_idx];
+ struct dst_sec *dst_symtab;
int i, err;
for (i = 1; i < obj->sec_cnt; i++) {
@@ -2034,6 +2034,9 @@ static int linker_append_elf_relos(struct bpf_linker *linker, struct src_obj *ob
return -1;
}
+ /* add_dst_sec() above could have invalidated linker->secs */
+ dst_symtab = &linker->secs[linker->symtab_sec_idx];
+
/* shdr->sh_link points to SYMTAB */
dst_sec->shdr->sh_link = linker->symtab_sec_idx;
--
2.34.1
From: Mohammad Athari Bin Ismail <[email protected]>
commit 020a45aff1190c32b1087cd75b57fbf6bff46ea6 upstream.
Existing genphy_loopback() is not applicable for Marvell PHY. Besides
configuring bit-6 and bit-13 in Page 0 Register 0 (Copper Control
Register), it is also required to configure same bits in Page 2
Register 21 (MAC Specific Control Register 2) according to speed of
the loopback is operating.
Tested working on Marvell88E1510 PHY for all speeds (1000/100/10Mbps).
FIXME: Based on trial and error test, it seem 1G need to have delay between
soft reset and loopback enablement.
Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration")
Cc: <[email protected]> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/marvell.c | 56 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 55 insertions(+), 1 deletion(-)
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -189,6 +189,8 @@
#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII 0x4
#define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */
+#define MII_88E1510_MSCR_2 0x15
+
#define MII_VCT5_TX_RX_MDI0_COUPLING 0x10
#define MII_VCT5_TX_RX_MDI1_COUPLING 0x11
#define MII_VCT5_TX_RX_MDI2_COUPLING 0x12
@@ -1932,6 +1934,58 @@ static void marvell_get_stats(struct phy
data[i] = marvell_get_stat(phydev, i);
}
+static int m88e1510_loopback(struct phy_device *phydev, bool enable)
+{
+ int err;
+
+ if (enable) {
+ u16 bmcr_ctl = 0, mscr2_ctl = 0;
+
+ if (phydev->speed == SPEED_1000)
+ bmcr_ctl = BMCR_SPEED1000;
+ else if (phydev->speed == SPEED_100)
+ bmcr_ctl = BMCR_SPEED100;
+
+ if (phydev->duplex == DUPLEX_FULL)
+ bmcr_ctl |= BMCR_FULLDPLX;
+
+ err = phy_write(phydev, MII_BMCR, bmcr_ctl);
+ if (err < 0)
+ return err;
+
+ if (phydev->speed == SPEED_1000)
+ mscr2_ctl = BMCR_SPEED1000;
+ else if (phydev->speed == SPEED_100)
+ mscr2_ctl = BMCR_SPEED100;
+
+ err = phy_modify_paged(phydev, MII_MARVELL_MSCR_PAGE,
+ MII_88E1510_MSCR_2, BMCR_SPEED1000 |
+ BMCR_SPEED100, mscr2_ctl);
+ if (err < 0)
+ return err;
+
+ /* Need soft reset to have speed configuration takes effect */
+ err = genphy_soft_reset(phydev);
+ if (err < 0)
+ return err;
+
+ /* FIXME: Based on trial and error test, it seem 1G need to have
+ * delay between soft reset and loopback enablement.
+ */
+ if (phydev->speed == SPEED_1000)
+ msleep(1000);
+
+ return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
+ BMCR_LOOPBACK);
+ } else {
+ err = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, 0);
+ if (err < 0)
+ return err;
+
+ return phy_config_aneg(phydev);
+ }
+}
+
static int marvell_vct5_wait_complete(struct phy_device *phydev)
{
int i;
@@ -3078,7 +3132,7 @@ static struct phy_driver marvell_drivers
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
- .set_loopback = genphy_loopback,
+ .set_loopback = m88e1510_loopback,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
.cable_test_start = marvell_vct7_cable_test_start,
From: Peng Fan <[email protected]>
[ Upstream commit 7a0df1f969c14939f60a7f9a6af72adcc314675f ]
A72 Cluster has 48KB Icache, 32KB Dcache and 1MB L2 Cache
- ICache is 3-way set-associative
- Dcache is 2-way set-associative
- Line size are 64bytes
So correct the cache-sets info.
Fixes: 2d87061e70dea ("arm64: dts: ti: Add Support for J721E SoC")
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Nishanth Menon <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index f0587fde147e6..9f1d25d57a693 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -61,7 +61,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
@@ -75,7 +75,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
};
--
2.34.1
From: Fabio Estevam <[email protected]>
[ Upstream commit ed2f97ad4b21072f849cf4ae6645d1f2b1d3f550 ]
After devm_request_threaded_irq() is called there is a chance that an
interrupt may occur before the spinlock is initialized, which will trigger
a kernel oops.
To prevent that, move the initialization of the spinlock prior to
requesting the interrupts.
Fixes: 51abcf7fdb70 ("media: imx-pxp: add i.MX Pixel Pipeline driver")
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/imx-pxp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/imx-pxp.c b/drivers/media/platform/imx-pxp.c
index 4321edc0c23d9..8e9c6fee75a48 100644
--- a/drivers/media/platform/imx-pxp.c
+++ b/drivers/media/platform/imx-pxp.c
@@ -1661,6 +1661,8 @@ static int pxp_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
+ spin_lock_init(&dev->irqlock);
+
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, pxp_irq_handler,
IRQF_ONESHOT, dev_name(&pdev->dev), dev);
if (ret < 0) {
@@ -1678,8 +1680,6 @@ static int pxp_probe(struct platform_device *pdev)
goto err_clk;
}
- spin_lock_init(&dev->irqlock);
-
ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
if (ret)
goto err_clk;
--
2.34.1
From: Lino Sanfilippo <[email protected]>
[ Upstream commit d1180405c7b5c7a1c6bde79d5fc24fe931430737 ]
With commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") the
function devm_ioremap() called from pl011_setup_port() was replaced with
devm_ioremap_resource(). Since this function not only remaps but also
requests the ports io memory region it now collides with the .config_port()
callback which requests the same region at uart port registration.
Since devm_ioremap_resource() already claims the memory successfully, the
request in .config_port() fails.
Later at uart port deregistration the attempt to release the unclaimed
memory also fails. The failure results in a “Trying to free nonexistent
resource" warning.
Fix these issues by removing the callbacks that implement the redundant
memory allocation/release. Also make sure that changing the drivers io
memory base address via TIOCSSERIAL is not allowed any more.
Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()")
Signed-off-by: Lino Sanfilippo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/amba-pl011.c | 27 +++------------------------
1 file changed, 3 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 52518a606c06a..b831d4d64c0a2 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2183,32 +2183,13 @@ static const char *pl011_type(struct uart_port *port)
return uap->port.type == PORT_AMBA ? uap->type : NULL;
}
-/*
- * Release the memory region(s) being used by 'port'
- */
-static void pl011_release_port(struct uart_port *port)
-{
- release_mem_region(port->mapbase, SZ_4K);
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int pl011_request_port(struct uart_port *port)
-{
- return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
- != NULL ? 0 : -EBUSY;
-}
-
/*
* Configure/autoconfigure the port.
*/
static void pl011_config_port(struct uart_port *port, int flags)
{
- if (flags & UART_CONFIG_TYPE) {
+ if (flags & UART_CONFIG_TYPE)
port->type = PORT_AMBA;
- pl011_request_port(port);
- }
}
/*
@@ -2223,6 +2204,8 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
+ if (port->mapbase != (unsigned long) ser->iomem_base)
+ ret = -EINVAL;
return ret;
}
@@ -2275,8 +2258,6 @@ static const struct uart_ops amba_pl011_pops = {
.flush_buffer = pl011_dma_flush_buffer,
.set_termios = pl011_set_termios,
.type = pl011_type,
- .release_port = pl011_release_port,
- .request_port = pl011_request_port,
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
@@ -2306,8 +2287,6 @@ static const struct uart_ops sbsa_uart_pops = {
.shutdown = sbsa_uart_shutdown,
.set_termios = sbsa_uart_set_termios,
.type = pl011_type,
- .release_port = pl011_release_port,
- .request_port = pl011_request_port,
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
--
2.34.1
From: Dan Carpenter <[email protected]>
commit b207602fb04537cb21ac38fabd7577eca2fa05ae upstream.
The "ksmbd_socket" variable is not initialized on this error path.
Cc: [email protected]
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ksmbd/transport_tcp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/ksmbd/transport_tcp.c
+++ b/fs/ksmbd/transport_tcp.c
@@ -404,7 +404,7 @@ static int create_socket(struct interfac
&ksmbd_socket);
if (ret) {
pr_err("Can't create socket for ipv4: %d\n", ret);
- goto out_error;
+ goto out_clear;
}
sin.sin_family = PF_INET;
@@ -462,6 +462,7 @@ static int create_socket(struct interfac
out_error:
tcp_destroy_socket(ksmbd_socket);
+out_clear:
iface->ksmbd_socket = NULL;
return ret;
}
From: Florian Westphal <[email protected]>
[ Upstream commit 28b78ecffea8078d81466b2e01bb5a154509f1ba ]
This makes 'bridge-nf-filter-pppoe-tagged' sysctl work for
bridged traffic.
Looking at the original commit it doesn't appear this ever worked:
static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff **pskb,
[..]
if (skb->protocol == htons(ETH_P_8021Q)) {
skb_pull(skb, VLAN_HLEN);
skb->network_header += VLAN_HLEN;
+ } else if (skb->protocol == htons(ETH_P_PPP_SES)) {
+ skb_pull(skb, PPPOE_SES_HLEN);
+ skb->network_header += PPPOE_SES_HLEN;
}
[..]
NF_HOOK(... POST_ROUTING, ...)
... but the adjusted offsets are never restored.
The alternative would be to rip this code out for good,
but otoh we'd have to keep this anyway for the vlan handling
(which works because vlan tag info is in the skb, not the packet
payload).
Reported-and-tested-by: Amish Chana <[email protected]>
Fixes: 516299d2f5b6f97 ("[NETFILTER]: bridge-nf: filter bridged IPv4/IPv6 encapsulated in pppoe traffic")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/br_netfilter_hooks.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 8edfb98ae1d58..68c0d0f928908 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -743,6 +743,9 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
if (nf_bridge->frag_max_size && nf_bridge->frag_max_size < mtu)
mtu = nf_bridge->frag_max_size;
+ nf_bridge_update_protocol(skb);
+ nf_bridge_push_encap_header(skb);
+
if (skb_is_gso(skb) || skb->len + mtu_reserved <= mtu) {
nf_bridge_info_free(skb);
return br_dev_queue_push_xmit(net, sk, skb);
@@ -760,8 +763,6 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
IPCB(skb)->frag_max_size = nf_bridge->frag_max_size;
- nf_bridge_update_protocol(skb);
-
data = this_cpu_ptr(&brnf_frag_data_storage);
if (skb_vlan_tag_present(skb)) {
@@ -789,8 +790,6 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
IP6CB(skb)->frag_max_size = nf_bridge->frag_max_size;
- nf_bridge_update_protocol(skb);
-
data = this_cpu_ptr(&brnf_frag_data_storage);
data->encap_size = nf_bridge_encap_header_len(skb);
data->size = ETH_HLEN + data->encap_size;
--
2.34.1
From: Anilkumar Kolli <[email protected]>
[ Upstream commit b689f091aafd1a874b2f88137934276ab0fca480 ]
CE interrupt configuration uses host ce parameters to assign/free
interrupts. Use host ce parameters to enable/disable interrupts.
This patch fixes below BUG,
BUG: KASAN: global-out-of-bounds in 0xffffffbffdfb035c at addr
ffffffbffde6eeac
Read of size 4 by task kworker/u8:2/132
Address belongs to variable ath11k_core_qmi_firmware_ready+0x1b0/0x5bc [ath11k]
OOB is due to ath11k_ahb_ce_irqs_enable() iterates ce_count(which is 12)
times and accessing 12th element in target_ce_config
(which has only 11 elements) from ath11k_ahb_ce_irq_enable().
With this change host ce configs are used to enable/disable interrupts.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00471-QCAHKSWPL_SILICONZ-1
Fixes: 967c1d1131fa ("ath11k: move target ce configs to hw_params")
Signed-off-by: Anilkumar Kolli <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/ahb.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 8c9c781afc3e5..096c502cce387 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -206,13 +206,13 @@ static void ath11k_ahb_clearbit32(struct ath11k_base *ab, u8 bit, u32 offset)
static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
{
- const struct ce_pipe_config *ce_config;
+ const struct ce_attr *ce_attr;
- ce_config = &ab->hw_params.target_ce_config[ce_id];
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_OUT)
+ ce_attr = &ab->hw_params.host_ce_config[ce_id];
+ if (ce_attr->src_nentries)
ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_IN) {
+ if (ce_attr->dest_nentries) {
ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
ath11k_ahb_setbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
CE_HOST_IE_3_ADDRESS);
@@ -221,13 +221,13 @@ static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
static void ath11k_ahb_ce_irq_disable(struct ath11k_base *ab, u16 ce_id)
{
- const struct ce_pipe_config *ce_config;
+ const struct ce_attr *ce_attr;
- ce_config = &ab->hw_params.target_ce_config[ce_id];
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_OUT)
+ ce_attr = &ab->hw_params.host_ce_config[ce_id];
+ if (ce_attr->src_nentries)
ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_IN) {
+ if (ce_attr->dest_nentries) {
ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
ath11k_ahb_clearbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
CE_HOST_IE_3_ADDRESS);
--
2.34.1
From: Giovanni Cabiddu <[email protected]>
[ Upstream commit 5002200b4fedd7e90e4fbc2e5c42a4b3351df814 ]
If the remote function did not ACK the reception of a message, the
function __adf_iov_putmsg() could detect it as a collision.
This was due to the fact that the collision and the timeout checks after
the ACK loop were in the wrong order. The timeout must be checked at the
end of the loop, so fix by swapping the order of the two checks.
Fixes: 9b768e8a3909 ("crypto: qat - detect PFVF collision after ACK")
Signed-off-by: Giovanni Cabiddu <[email protected]>
Co-developed-by: Marco Chiappero <[email protected]>
Signed-off-by: Marco Chiappero <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index d5a7261ddd928..7ec81989beb03 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -138,6 +138,12 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
val = ADF_CSR_RD(pmisc_bar_addr, pf2vf_offset);
} while ((val & int_bit) && (count++ < ADF_IOV_MSG_ACK_MAX_RETRY));
+ if (val & int_bit) {
+ dev_dbg(&GET_DEV(accel_dev), "ACK not received from remote\n");
+ val &= ~int_bit;
+ ret = -EIO;
+ }
+
if (val != msg) {
dev_dbg(&GET_DEV(accel_dev),
"Collision - PFVF CSR overwritten by remote function\n");
@@ -145,12 +151,6 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
goto out;
}
- if (val & int_bit) {
- dev_dbg(&GET_DEV(accel_dev), "ACK not received from remote\n");
- val &= ~int_bit;
- ret = -EIO;
- }
-
/* Finished with the PFVF CSR; relinquish it and leave msg in CSR */
ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, val & ~local_in_use_mask);
out:
--
2.34.1
From: Marco Chiappero <[email protected]>
[ Upstream commit e17f49bb244a281fe39bfdad0306a38b3a02e7bf ]
The initial version of the PFVF protocol included an initial "carrier
sensing" to get ownership of the channel.
Collisions can happen anyway, the extra wait and test does not prevent
collisions, it instead slows the communication down, so remove it.
Signed-off-by: Marco Chiappero <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 20 +------------------
1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index 5a41beb8f20f6..d3f6ff68d45d9 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -126,28 +126,10 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
goto out;
}
- /* Attempt to get ownership of PF2VF CSR */
msg &= ~local_in_use_mask;
msg |= local_in_use_pattern;
- ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, msg);
- /* Wait in case remote func also attempting to get ownership */
- msleep(ADF_IOV_MSG_COLLISION_DETECT_DELAY);
-
- val = ADF_CSR_RD(pmisc_bar_addr, pf2vf_offset);
- if ((val & local_in_use_mask) != local_in_use_pattern) {
- dev_dbg(&GET_DEV(accel_dev),
- "PF2VF CSR in use by remote - collision detected\n");
- ret = -EBUSY;
- goto out;
- }
-
- /*
- * This function now owns the PV2VF CSR. The IN_USE_BY pattern must
- * remain in the PF2VF CSR for all writes including ACK from remote
- * until this local function relinquishes the CSR. Send the message
- * by interrupting the remote.
- */
+ /* Attempt to get ownership of the PF2VF CSR */
ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, msg | int_bit);
/* Wait for confirmation from remote func it received the message */
--
2.34.1
From: Mark Rutland <[email protected]>
[ Upstream commit 08b0af5b2affbe7419853e8dd1330e4b3fe27125 ]
Some thread flags can be set remotely, and so even when IRQs are disabled,
the flags can change under our feet. Thus, when setting flags we must use
an atomic operation rather than a plain read-modify-write sequence, as a
plain read-modify-write may discard flags which are concurrently set by a
remote thread, e.g.
// task A // task B
tmp = A->thread_info.flags;
set_tsk_thread_flag(A, NEWFLAG_B);
tmp |= NEWFLAG_A;
A->thread_info.flags = tmp;
arch/powerpc/kernel/interrupt.c's system_call_exception() sets
_TIF_RESTOREALL in the thread info flags with a read-modify-write, which
may result in other flags being discarded.
Elsewhere in the file it uses clear_bits() to atomically remove flag bits,
so use set_bits() here for consistency with those.
There may be reasons (e.g. instrumentation) that prevent the use of
set_thread_flag() and clear_thread_flag() here, which would otherwise be
preferable.
Fixes: ae7aaecc3f2f78b7 ("powerpc/64s: system call rfscv workaround for TM bugs")
Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Eirik Fuller <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/interrupt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/interrupt.c b/arch/powerpc/kernel/interrupt.c
index 835b626cd4760..df048e331cbfe 100644
--- a/arch/powerpc/kernel/interrupt.c
+++ b/arch/powerpc/kernel/interrupt.c
@@ -148,7 +148,7 @@ notrace long system_call_exception(long r3, long r4, long r5,
*/
if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
unlikely(MSR_TM_TRANSACTIONAL(regs->msr)))
- current_thread_info()->flags |= _TIF_RESTOREALL;
+ set_bits(_TIF_RESTOREALL, ¤t_thread_info()->flags);
/*
* If the system call was made with a transaction active, doom it and
--
2.34.1
From: Jesper Dangaard Brouer <[email protected]>
[ Upstream commit 4fa8fcd3440101dbacf4fae91de69877ef751977 ]
Driver already implicitly supports XDP metadata access in AF_XDP
zero-copy mode, as xsk_buff_pool's xp_alloc() naturally set xdp_buff
data_meta equal data.
This works fine for XDP and AF_XDP, but if a BPF-prog adjust via
bpf_xdp_adjust_meta() and choose to call XDP_PASS, then igc function
igc_construct_skb_zc() will construct an invalid SKB packet. The
function correctly include the xdp->data_meta area in the memcpy, but
forgot to pull header to take metasize into account.
Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Signed-off-by: Jesper Dangaard Brouer <[email protected]>
Tested-by: Nechama Kraus <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igc/igc_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 0a96627391a8c..c7fa978cdf02e 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -2447,8 +2447,10 @@ static struct sk_buff *igc_construct_skb_zc(struct igc_ring *ring,
skb_reserve(skb, xdp->data_meta - xdp->data_hard_start);
memcpy(__skb_put(skb, totalsize), xdp->data_meta, totalsize);
- if (metasize)
+ if (metasize) {
skb_metadata_set(skb, metasize);
+ __skb_pull(skb, metasize);
+ }
return skb;
}
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit b220110e4cd442156f36e1d9b4914bb9e87b0d00 ]
In amdgpu_connector_lcd_native_mode(), the return value of
drm_mode_duplicate() is assigned to mode, and there is a dereference
of it in amdgpu_connector_lcd_native_mode(), which will lead to a NULL
pointer dereference on failure of drm_mode_duplicate().
Fix this bug add a check of mode.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DRM_AMDGPU=m show no new warnings, and
our static analyzer no longer warns about this code.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
index 0de66f59adb8a..df1f9b88a53f9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -387,6 +387,9 @@ amdgpu_connector_lcd_native_mode(struct drm_encoder *encoder)
native_mode->vdisplay != 0 &&
native_mode->clock != 0) {
mode = drm_mode_duplicate(dev, native_mode);
+ if (!mode)
+ return NULL;
+
mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
drm_mode_set_name(mode);
@@ -401,6 +404,9 @@ amdgpu_connector_lcd_native_mode(struct drm_encoder *encoder)
* simpler.
*/
mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false);
+ if (!mode)
+ return NULL;
+
mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
DRM_DEBUG_KMS("Adding cvt approximation of native panel mode %s\n", mode->name);
}
--
2.34.1
From: Kajol Jain <[email protected]>
[ Upstream commit db52f57211b4e45f0ebb274e2c877b211dc18591 ]
Branch data available to BPF programs can be very useful to get stack traces
out of userspace application.
Commit fff7b64355ea ("bpf: Add bpf_read_branch_records() helper") added BPF
support to capture branch records in x86. Enable this feature also for other
architectures as well by removing checks specific to x86.
If an architecture doesn't support branch records, bpf_read_branch_records()
still has appropriate checks and it will return an -EINVAL in that scenario.
Based on UAPI helper doc in include/uapi/linux/bpf.h, unsupported architectures
should return -ENOENT in such case. Hence, update the appropriate check to
return -ENOENT instead.
Selftest 'perf_branches' result on power9 machine which has the branch stacks
support:
- Before this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:FAIL
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:FAIL
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
- After this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:OK
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Selftest 'perf_branches' result on power9 machine which doesn't have branch
stack report:
- After this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:SKIP
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:OK
Summary: 1/1 PASSED, 1 SKIPPED, 0 FAILED
Fixes: fff7b64355eac ("bpf: Add bpf_read_branch_records() helper")
Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/bpf_trace.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 6c1038526d1fc..5a18b861fcf75 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -1322,9 +1322,6 @@ static const struct bpf_func_proto bpf_perf_prog_read_value_proto = {
BPF_CALL_4(bpf_read_branch_records, struct bpf_perf_event_data_kern *, ctx,
void *, buf, u32, size, u64, flags)
{
-#ifndef CONFIG_X86
- return -ENOENT;
-#else
static const u32 br_entry_size = sizeof(struct perf_branch_entry);
struct perf_branch_stack *br_stack = ctx->data->br_stack;
u32 to_copy;
@@ -1333,7 +1330,7 @@ BPF_CALL_4(bpf_read_branch_records, struct bpf_perf_event_data_kern *, ctx,
return -EINVAL;
if (unlikely(!br_stack))
- return -EINVAL;
+ return -ENOENT;
if (flags & BPF_F_GET_BRANCH_RECORDS_SIZE)
return br_stack->nr * br_entry_size;
@@ -1345,7 +1342,6 @@ BPF_CALL_4(bpf_read_branch_records, struct bpf_perf_event_data_kern *, ctx,
memcpy(buf, br_stack->entries, to_copy);
return to_copy;
-#endif
}
static const struct bpf_func_proto bpf_read_branch_records_proto = {
--
2.34.1
From: Paul Cercueil <[email protected]>
commit 0697f8441faad552fbeb02d74454b5e7bcc956a2 upstream.
The original comment that describes the function
nand_davinci_read_page_hwecc_oob_first() is very obscure and it is hard
to understand what it is for.
Cc: <[email protected]> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/davinci_nand.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -372,17 +372,15 @@ correct:
}
/**
- * nand_read_page_hwecc_oob_first - hw ecc, read oob first
+ * nand_davinci_read_page_hwecc_oob_first - Hardware ECC page read with ECC
+ * data read from OOB area
* @chip: nand chip info structure
* @buf: buffer to store read data
* @oob_required: caller requires OOB data read to chip->oob_poi
* @page: page number to read
*
- * Hardware ECC for large page chips, require OOB to be read first. For this
- * ECC mode, the write_page method is re-used from ECC_HW. These methods
- * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
- * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
- * the data area, by overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, which requires the ECC data to be
+ * extracted from the OOB before the actual data is read.
*/
static int nand_davinci_read_page_hwecc_oob_first(struct nand_chip *chip,
uint8_t *buf,
From: Paul Cercueil <[email protected]>
commit 9c9d709965385de5a99f84b14bd5860e1541729e upstream.
The function nand_davinci_read_page_hwecc_oob_first() first reads the
OOB data, extracts the ECC information, programs the ECC hardware before
reading the actual data in a loop.
Right after the OOB data was read, it called nand_read_page_op() to
reset the read cursor to the beginning of the page. This caused the
first page to be read twice: in that call, and later in the loop.
Address that issue by changing the call to nand_read_page_op() to
nand_change_read_column_op(), which will only reset the read cursor.
Cc: <[email protected]> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/davinci_nand.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -401,7 +401,8 @@ static int nand_davinci_read_page_hwecc_
if (ret)
return ret;
- ret = nand_read_page_op(chip, page, 0, NULL, 0);
+ /* Move read cursor to start of page */
+ ret = nand_change_read_column_op(chip, 0, NULL, 0, false);
if (ret)
return ret;
From: Paul Cercueil <[email protected]>
commit 71e89591502d737c10db2bd4d8fcfaa352552afb upstream.
The function nand_davinci_read_page_hwecc_oob_first() does read the ECC
data from the OOB area. Therefore it does not need to calculate the ECC
as it is already available.
Cc: <[email protected]> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/davinci_nand.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -394,7 +394,6 @@ static int nand_davinci_read_page_hwecc_
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_code = chip->ecc.code_buf;
- uint8_t *ecc_calc = chip->ecc.calc_buf;
unsigned int max_bitflips = 0;
/* Read the OOB area first */
@@ -420,8 +419,6 @@ static int nand_davinci_read_page_hwecc_
if (ret)
return ret;
- chip->ecc.calculate(chip, p, &ecc_calc[i]);
-
stat = chip->ecc.correct(chip, p, &ecc_code[i], NULL);
if (stat == -EBADMSG &&
(chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
From: Nick Kossifidis <[email protected]>
commit a11c07f032a0e9a562a32ece73af96b0e754c4b3 upstream.
On kdump instead of using an intermediate step to relocate the kernel,
that lives in a "control buffer" outside the current kernel's mapping,
we jump to the crash kernel directly by calling riscv_kexec_norelocate().
The current implementation uses va_pa_offset while switching to physical
addressing, however since we moved the kernel outside the linear mapping
this won't work anymore since riscv_kexec_norelocate() is part of the
kernel mapping and we should use kernel_map.va_kernel_pa_offset, and also
take XIP kernel into account.
We don't really need to use va_pa_offset on riscv_kexec_norelocate, we
can just set STVEC to the physical address of the new kernel instead and
let the hart jump to the new kernel on the next instruction after setting
SATP to zero. This fixes kdump and is also simpler/cleaner.
I tested this on the latest qemu and HiFive Unmatched and works as
expected.
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Nick Kossifidis <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/kernel/kexec_relocate.S | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
--- a/arch/riscv/kernel/kexec_relocate.S
+++ b/arch/riscv/kernel/kexec_relocate.S
@@ -159,25 +159,15 @@ SYM_CODE_START(riscv_kexec_norelocate)
* s0: (const) Phys address to jump to
* s1: (const) Phys address of the FDT image
* s2: (const) The hartid of the current hart
- * s3: (const) kernel_map.va_pa_offset, used when switching MMU off
*/
mv s0, a1
mv s1, a2
mv s2, a3
- mv s3, a4
/* Disable / cleanup interrupts */
csrw CSR_SIE, zero
csrw CSR_SIP, zero
- /* Switch to physical addressing */
- la s4, 1f
- sub s4, s4, s3
- csrw CSR_STVEC, s4
- csrw CSR_SATP, zero
-
-.align 2
-1:
/* Pass the arguments to the next kernel / Cleanup*/
mv a0, s2
mv a1, s1
@@ -214,7 +204,15 @@ SYM_CODE_START(riscv_kexec_norelocate)
csrw CSR_SCAUSE, zero
csrw CSR_SSCRATCH, zero
- jalr zero, a2, 0
+ /*
+ * Switch to physical addressing
+ * This will also trigger a jump to CSR_STVEC
+ * which in this case is the address of the new
+ * kernel.
+ */
+ csrw CSR_STVEC, a2
+ csrw CSR_SATP, zero
+
SYM_CODE_END(riscv_kexec_norelocate)
.section ".rodata"
From: Joseph Hwang <[email protected]>
[ Upstream commit 93fb70bc112e922def6e50b37e20ccfce0c67c0a ]
This patch refactors the set_exp_feature with a feature table
consisting of UUIDs and the corresponding callback functions.
In this way, a new experimental feature setting function can be
simply added with its UUID and callback function.
Signed-off-by: Joseph Hwang <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/mgmt.c | 248 +++++++++++++++++++++++++------------------
1 file changed, 142 insertions(+), 106 deletions(-)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index cea01e275f1ea..d7306c1ffbef5 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3806,7 +3806,7 @@ static const u8 rpa_resolution_uuid[16] = {
static int read_exp_features_info(struct sock *sk, struct hci_dev *hdev,
void *data, u16 data_len)
{
- char buf[62]; /* Enough space for 3 features */
+ char buf[62]; /* Enough space for 3 features */
struct mgmt_rp_read_exp_features_info *rp = (void *)buf;
u16 idx = 0;
u32 flags;
@@ -3892,150 +3892,186 @@ static int exp_debug_feature_changed(bool enabled, struct sock *skip)
}
#endif
-static int set_exp_feature(struct sock *sk, struct hci_dev *hdev,
- void *data, u16 data_len)
+#define EXP_FEAT(_uuid, _set_func) \
+{ \
+ .uuid = _uuid, \
+ .set_func = _set_func, \
+}
+
+/* The zero key uuid is special. Multiple exp features are set through it. */
+static int set_zero_key_func(struct sock *sk, struct hci_dev *hdev,
+ struct mgmt_cp_set_exp_feature *cp, u16 data_len)
{
- struct mgmt_cp_set_exp_feature *cp = data;
struct mgmt_rp_set_exp_feature rp;
- bt_dev_dbg(hdev, "sock %p", sk);
-
- if (!memcmp(cp->uuid, ZERO_KEY, 16)) {
- memset(rp.uuid, 0, 16);
- rp.flags = cpu_to_le32(0);
+ memset(rp.uuid, 0, 16);
+ rp.flags = cpu_to_le32(0);
#ifdef CONFIG_BT_FEATURE_DEBUG
- if (!hdev) {
- bool changed = bt_dbg_get();
+ if (!hdev) {
+ bool changed = bt_dbg_get();
- bt_dbg_set(false);
+ bt_dbg_set(false);
- if (changed)
- exp_debug_feature_changed(false, sk);
- }
+ if (changed)
+ exp_debug_feature_changed(false, sk);
+ }
#endif
- if (hdev && use_ll_privacy(hdev) && !hdev_is_powered(hdev)) {
- bool changed = hci_dev_test_flag(hdev,
- HCI_ENABLE_LL_PRIVACY);
+ if (hdev && use_ll_privacy(hdev) && !hdev_is_powered(hdev)) {
+ bool changed = hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY);
- hci_dev_clear_flag(hdev, HCI_ENABLE_LL_PRIVACY);
+ hci_dev_clear_flag(hdev, HCI_ENABLE_LL_PRIVACY);
- if (changed)
- exp_ll_privacy_feature_changed(false, hdev, sk);
- }
+ if (changed)
+ exp_ll_privacy_feature_changed(false, hdev, sk);
+ }
- hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
+ hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
- return mgmt_cmd_complete(sk, hdev ? hdev->id : MGMT_INDEX_NONE,
- MGMT_OP_SET_EXP_FEATURE, 0,
- &rp, sizeof(rp));
- }
+ return mgmt_cmd_complete(sk, hdev ? hdev->id : MGMT_INDEX_NONE,
+ MGMT_OP_SET_EXP_FEATURE, 0,
+ &rp, sizeof(rp));
+}
#ifdef CONFIG_BT_FEATURE_DEBUG
- if (!memcmp(cp->uuid, debug_uuid, 16)) {
- bool val, changed;
- int err;
+static int set_debug_func(struct sock *sk, struct hci_dev *hdev,
+ struct mgmt_cp_set_exp_feature *cp, u16 data_len)
+{
+ struct mgmt_rp_set_exp_feature rp;
- /* Command requires to use the non-controller index */
- if (hdev)
- return mgmt_cmd_status(sk, hdev->id,
- MGMT_OP_SET_EXP_FEATURE,
- MGMT_STATUS_INVALID_INDEX);
+ bool val, changed;
+ int err;
- /* Parameters are limited to a single octet */
- if (data_len != MGMT_SET_EXP_FEATURE_SIZE + 1)
- return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
- MGMT_OP_SET_EXP_FEATURE,
- MGMT_STATUS_INVALID_PARAMS);
+ /* Command requires to use the non-controller index */
+ if (hdev)
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_INDEX);
- /* Only boolean on/off is supported */
- if (cp->param[0] != 0x00 && cp->param[0] != 0x01)
- return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
- MGMT_OP_SET_EXP_FEATURE,
- MGMT_STATUS_INVALID_PARAMS);
+ /* Parameters are limited to a single octet */
+ if (data_len != MGMT_SET_EXP_FEATURE_SIZE + 1)
+ return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_PARAMS);
- val = !!cp->param[0];
- changed = val ? !bt_dbg_get() : bt_dbg_get();
- bt_dbg_set(val);
+ /* Only boolean on/off is supported */
+ if (cp->param[0] != 0x00 && cp->param[0] != 0x01)
+ return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_PARAMS);
- memcpy(rp.uuid, debug_uuid, 16);
- rp.flags = cpu_to_le32(val ? BIT(0) : 0);
+ val = !!cp->param[0];
+ changed = val ? !bt_dbg_get() : bt_dbg_get();
+ bt_dbg_set(val);
- hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
+ memcpy(rp.uuid, debug_uuid, 16);
+ rp.flags = cpu_to_le32(val ? BIT(0) : 0);
- err = mgmt_cmd_complete(sk, MGMT_INDEX_NONE,
- MGMT_OP_SET_EXP_FEATURE, 0,
- &rp, sizeof(rp));
+ hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
- if (changed)
- exp_debug_feature_changed(val, sk);
+ err = mgmt_cmd_complete(sk, MGMT_INDEX_NONE,
+ MGMT_OP_SET_EXP_FEATURE, 0,
+ &rp, sizeof(rp));
- return err;
- }
+ if (changed)
+ exp_debug_feature_changed(val, sk);
+
+ return err;
+}
#endif
- if (!memcmp(cp->uuid, rpa_resolution_uuid, 16)) {
- bool val, changed;
- int err;
- u32 flags;
+static int set_rpa_resolution_func(struct sock *sk, struct hci_dev *hdev,
+ struct mgmt_cp_set_exp_feature *cp,
+ u16 data_len)
+{
+ struct mgmt_rp_set_exp_feature rp;
+ bool val, changed;
+ int err;
+ u32 flags;
+
+ /* Command requires to use the controller index */
+ if (!hdev)
+ return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_INDEX);
- /* Command requires to use the controller index */
- if (!hdev)
- return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
- MGMT_OP_SET_EXP_FEATURE,
- MGMT_STATUS_INVALID_INDEX);
+ /* Changes can only be made when controller is powered down */
+ if (hdev_is_powered(hdev))
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_REJECTED);
- /* Changes can only be made when controller is powered down */
- if (hdev_is_powered(hdev))
- return mgmt_cmd_status(sk, hdev->id,
- MGMT_OP_SET_EXP_FEATURE,
- MGMT_STATUS_REJECTED);
+ /* Parameters are limited to a single octet */
+ if (data_len != MGMT_SET_EXP_FEATURE_SIZE + 1)
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_PARAMS);
- /* Parameters are limited to a single octet */
- if (data_len != MGMT_SET_EXP_FEATURE_SIZE + 1)
- return mgmt_cmd_status(sk, hdev->id,
- MGMT_OP_SET_EXP_FEATURE,
- MGMT_STATUS_INVALID_PARAMS);
+ /* Only boolean on/off is supported */
+ if (cp->param[0] != 0x00 && cp->param[0] != 0x01)
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_PARAMS);
- /* Only boolean on/off is supported */
- if (cp->param[0] != 0x00 && cp->param[0] != 0x01)
- return mgmt_cmd_status(sk, hdev->id,
- MGMT_OP_SET_EXP_FEATURE,
- MGMT_STATUS_INVALID_PARAMS);
+ val = !!cp->param[0];
- val = !!cp->param[0];
+ if (val) {
+ changed = !hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY);
+ hci_dev_set_flag(hdev, HCI_ENABLE_LL_PRIVACY);
+ hci_dev_clear_flag(hdev, HCI_ADVERTISING);
- if (val) {
- changed = !hci_dev_test_flag(hdev,
- HCI_ENABLE_LL_PRIVACY);
- hci_dev_set_flag(hdev, HCI_ENABLE_LL_PRIVACY);
- hci_dev_clear_flag(hdev, HCI_ADVERTISING);
+ /* Enable LL privacy + supported settings changed */
+ flags = BIT(0) | BIT(1);
+ } else {
+ changed = hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY);
+ hci_dev_clear_flag(hdev, HCI_ENABLE_LL_PRIVACY);
- /* Enable LL privacy + supported settings changed */
- flags = BIT(0) | BIT(1);
- } else {
- changed = hci_dev_test_flag(hdev,
- HCI_ENABLE_LL_PRIVACY);
- hci_dev_clear_flag(hdev, HCI_ENABLE_LL_PRIVACY);
+ /* Disable LL privacy + supported settings changed */
+ flags = BIT(1);
+ }
- /* Disable LL privacy + supported settings changed */
- flags = BIT(1);
- }
+ memcpy(rp.uuid, rpa_resolution_uuid, 16);
+ rp.flags = cpu_to_le32(flags);
- memcpy(rp.uuid, rpa_resolution_uuid, 16);
- rp.flags = cpu_to_le32(flags);
+ hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
- hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
+ err = mgmt_cmd_complete(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE, 0,
+ &rp, sizeof(rp));
- err = mgmt_cmd_complete(sk, hdev->id,
- MGMT_OP_SET_EXP_FEATURE, 0,
- &rp, sizeof(rp));
+ if (changed)
+ exp_ll_privacy_feature_changed(val, hdev, sk);
- if (changed)
- exp_ll_privacy_feature_changed(val, hdev, sk);
+ return err;
+}
- return err;
+static const struct mgmt_exp_feature {
+ const u8 *uuid;
+ int (*set_func)(struct sock *sk, struct hci_dev *hdev,
+ struct mgmt_cp_set_exp_feature *cp, u16 data_len);
+} exp_features[] = {
+ EXP_FEAT(ZERO_KEY, set_zero_key_func),
+#ifdef CONFIG_BT_FEATURE_DEBUG
+ EXP_FEAT(debug_uuid, set_debug_func),
+#endif
+ EXP_FEAT(rpa_resolution_uuid, set_rpa_resolution_func),
+
+ /* end with a null feature */
+ EXP_FEAT(NULL, NULL)
+};
+
+static int set_exp_feature(struct sock *sk, struct hci_dev *hdev,
+ void *data, u16 data_len)
+{
+ struct mgmt_cp_set_exp_feature *cp = data;
+ size_t i = 0;
+
+ bt_dev_dbg(hdev, "sock %p", sk);
+
+ for (i = 0; exp_features[i].uuid; i++) {
+ if (!memcmp(cp->uuid, exp_features[i].uuid, 16))
+ return exp_features[i].set_func(sk, hdev, cp, data_len);
}
return mgmt_cmd_status(sk, hdev ? hdev->id : MGMT_INDEX_NONE,
--
2.34.1
From: Lv Yunlong <[email protected]>
[ Upstream commit f973795a8d19cbf3d03807704eb7c6ff65788d5a ]
In iwl_txq_dyn_alloc_dma, txq->tfds is freed at first time by:
iwl_txq_alloc()->goto err_free_tfds->dma_free_coherent(). But
it forgot to set txq->tfds to NULL.
Then the txq->tfds is freed again in iwl_txq_dyn_alloc_dma by:
goto error->iwl_txq_gen2_free_memory()->dma_free_coherent().
My patch sets txq->tfds to NULL after the first free to avoid the
double free.
Fixes: 0cd1ad2d7fd41 ("iwlwifi: move all bus-independent TX functions to common code")
Signed-off-by: Lv Yunlong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/queue/tx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/queue/tx.c b/drivers/net/wireless/intel/iwlwifi/queue/tx.c
index 451b060693501..0f3526b0c5b00 100644
--- a/drivers/net/wireless/intel/iwlwifi/queue/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/queue/tx.c
@@ -1072,6 +1072,7 @@ int iwl_txq_alloc(struct iwl_trans *trans, struct iwl_txq *txq, int slots_num,
return 0;
err_free_tfds:
dma_free_coherent(trans->dev, tfd_sz, txq->tfds, txq->dma_addr);
+ txq->tfds = NULL;
error:
if (txq->entries && cmd_queue)
for (i = 0; i < slots_num; i++)
--
2.34.1
From: Bhupesh Sharma <[email protected]>
[ Upstream commit 4047b9db1aa7512a10ba3560a3f63821c8c40235 ]
dwmac-qcom-ethqos currently exposes a mechanism to dump rgmii registers
after the 'stmmac_dvr_probe()' returns. However with commit
5ec55823438e ("net: stmmac: add clocks management for gmac driver"),
we now let 'pm_runtime_put()' disable the clocks before returning from
'stmmac_dvr_probe()'.
This causes a crash when 'rgmii_dump()' register dumps are enabled,
as the clocks are already off.
Since other dwmac drivers (possible future users as well) might
require a similar register dump feature, introduce a platform level
callback to allow the same.
This fixes the crash noticed while enabling rgmii_dump() dumps in
dwmac-qcom-ethqos driver as well. It also allows future changes
to keep a invoking the register dump callback from the correct
place inside 'stmmac_dvr_probe()'.
Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: Bhupesh Sharma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 7 ++++---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
include/linux/stmmac.h | 1 +
3 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 5c74b6279d690..6b1d9e8879f46 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -113,8 +113,10 @@ static void rgmii_updatel(struct qcom_ethqos *ethqos,
rgmii_writel(ethqos, temp, offset);
}
-static void rgmii_dump(struct qcom_ethqos *ethqos)
+static void rgmii_dump(void *priv)
{
+ struct qcom_ethqos *ethqos = priv;
+
dev_dbg(ðqos->pdev->dev, "Rgmii register dump\n");
dev_dbg(ðqos->pdev->dev, "RGMII_IO_MACRO_CONFIG: %x\n",
rgmii_readl(ethqos, RGMII_IO_MACRO_CONFIG));
@@ -499,6 +501,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
plat_dat->bsp_priv = ethqos;
plat_dat->fix_mac_speed = ethqos_fix_mac_speed;
+ plat_dat->dump_debug_regs = rgmii_dump;
plat_dat->has_gmac4 = 1;
plat_dat->pmt = 1;
plat_dat->tso_en = of_property_read_bool(np, "snps,tso");
@@ -507,8 +510,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
if (ret)
goto err_clk;
- rgmii_dump(ethqos);
-
return ret;
err_clk:
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3422f0746d825..06e5431cf51df 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7077,6 +7077,9 @@ int stmmac_dvr_probe(struct device *device,
stmmac_init_fs(ndev);
#endif
+ if (priv->plat->dump_debug_regs)
+ priv->plat->dump_debug_regs(priv->plat->bsp_priv);
+
/* Let pm_runtime_put() disable the clocks.
* If CONFIG_PM is not enabled, the clocks will stay powered.
*/
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index a6f03b36fc4f7..1450397fc0bcd 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -233,6 +233,7 @@ struct plat_stmmacenet_data {
int (*clks_config)(void *priv, bool enabled);
int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,
void *ctx);
+ void (*dump_debug_regs)(void *priv);
void *bsp_priv;
struct clk *stmmac_clk;
struct clk *pclk;
--
2.34.1
From: Hou Tao <[email protected]>
[ Upstream commit 866de407444398bc8140ea70de1dba5f91cc34ac ]
BPF_LOG_KERNEL is only used internally, so disallow bpf_btf_load()
to set log level as BPF_LOG_KERNEL. The same checking has already
been done in bpf_check(), so factor out a helper to check the
validity of log attributes and use it in both places.
Fixes: 8580ac9404f6 ("bpf: Process in-kernel BTF")
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bpf_verifier.h | 7 +++++++
kernel/bpf/btf.c | 3 +--
kernel/bpf/verifier.c | 6 +++---
3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index 5424124dbe365..364550dd19c4a 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -396,6 +396,13 @@ static inline bool bpf_verifier_log_needed(const struct bpf_verifier_log *log)
log->level == BPF_LOG_KERNEL);
}
+static inline bool
+bpf_verifier_log_attr_valid(const struct bpf_verifier_log *log)
+{
+ return log->len_total >= 128 && log->len_total <= UINT_MAX >> 2 &&
+ log->level && log->ubuf && !(log->level & ~BPF_LOG_MASK);
+}
+
#define BPF_MAX_SUBPROGS 256
struct bpf_subprog_info {
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 79c0bcdcab842..b8ed4da63bc8c 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -4332,8 +4332,7 @@ static struct btf *btf_parse(bpfptr_t btf_data, u32 btf_data_size,
log->len_total = log_size;
/* log attributes have to be sane */
- if (log->len_total < 128 || log->len_total > UINT_MAX >> 2 ||
- !log->level || !log->ubuf) {
+ if (!bpf_verifier_log_attr_valid(log)) {
err = -EINVAL;
goto errout;
}
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index b84e63d62b8af..18c75d6d98960 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -13759,11 +13759,11 @@ int bpf_check(struct bpf_prog **prog, union bpf_attr *attr, bpfptr_t uattr)
log->ubuf = (char __user *) (unsigned long) attr->log_buf;
log->len_total = attr->log_size;
- ret = -EINVAL;
/* log attributes have to be sane */
- if (log->len_total < 128 || log->len_total > UINT_MAX >> 2 ||
- !log->level || !log->ubuf || log->level & ~BPF_LOG_MASK)
+ if (!bpf_verifier_log_attr_valid(log)) {
+ ret = -EINVAL;
goto err_unlock;
+ }
}
if (IS_ERR(btf_vmlinux)) {
--
2.34.1
From: Yang Yingliang <[email protected]>
[ Upstream commit ef054e345ed8c79ce1121a3599b5a2dfd78e57a0 ]
n the 'radio->hdl.error' error handling, ctrl handler allocated by
v4l2_ctrl_new_std() does not released, and caused memory leak as
follows:
unreferenced object 0xffff888033d54200 (size 256):
comm "i2c-si470x-19", pid 909, jiffies 4294914203 (age 8.072s)
hex dump (first 32 bytes):
e8 69 11 03 80 88 ff ff 00 46 d5 33 80 88 ff ff .i.......F.3....
10 42 d5 33 80 88 ff ff 10 42 d5 33 80 88 ff ff .B.3.....B.3....
backtrace:
[<00000000086bd4ed>] __kmalloc_node+0x1eb/0x360
[<00000000bdb68871>] kvmalloc_node+0x66/0x120
[<00000000fac74e4c>] v4l2_ctrl_new+0x7b9/0x1c60 [videodev]
[<00000000693bf940>] v4l2_ctrl_new_std+0x19b/0x270 [videodev]
[<00000000c0cb91bc>] si470x_i2c_probe+0x2d3/0x9a0 [radio_si470x_i2c]
[<0000000056a6f01f>] i2c_device_probe+0x4d8/0xbe0
Fix the error handling path to avoid memory leak.
Reported-by: Hulk Robot <[email protected]>
Fixes: 8c081b6f9a9b ("media: radio: Critical v4l2 registration...")
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/radio/si470x/radio-si470x-i2c.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index a972c0705ac79..76d39e2e87706 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -368,7 +368,7 @@ static int si470x_i2c_probe(struct i2c_client *client)
if (radio->hdl.error) {
retval = radio->hdl.error;
dev_err(&client->dev, "couldn't register control\n");
- goto err_dev;
+ goto err_all;
}
/* video device initialization */
@@ -463,7 +463,6 @@ static int si470x_i2c_probe(struct i2c_client *client)
return 0;
err_all:
v4l2_ctrl_handler_free(&radio->hdl);
-err_dev:
v4l2_device_unregister(&radio->v4l2_dev);
err_initial:
return retval;
--
2.34.1
From: Tudor Ambarus <[email protected]>
[ Upstream commit 1e67bd2b8cb90b66e89562598e9c2046246832d3 ]
The tx_submit() method of struct dma_async_tx_descriptor is entitled
to do sanity checks and return errors if encountered. It's not the
case for the DMA controller drivers that this client is using
(at_h/xdmac), because they currently don't do sanity checks and always
return a positive cookie at tx_submit() method. In case the controller
drivers will implement sanity checks and return errors, print a message
so that the client will be informed that something went wrong at
tx_submit() level.
Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Tudor Ambarus <[email protected]>
Acked-by: Richard Genoud <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 249ea35088d27..16ff972decfef 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1004,6 +1004,11 @@ static void atmel_tx_dma(struct uart_port *port)
desc->callback = atmel_complete_tx_dma;
desc->callback_param = atmel_port;
atmel_port->cookie_tx = dmaengine_submit(desc);
+ if (dma_submit_error(atmel_port->cookie_tx)) {
+ dev_err(port->dev, "dma_submit_error %d\n",
+ atmel_port->cookie_tx);
+ return;
+ }
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1258,6 +1263,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
desc->callback_param = port;
atmel_port->desc_rx = desc;
atmel_port->cookie_rx = dmaengine_submit(desc);
+ if (dma_submit_error(atmel_port->cookie_rx)) {
+ dev_err(port->dev, "dma_submit_error %d\n",
+ atmel_port->cookie_rx);
+ goto chan_err;
+ }
return 0;
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 401891a9debaf0a684502f2aaecf53448cee9414 ]
Perform a memory copy before we do the sanity checks of btf_ext_hdr.
This prevents misaligned memory access if raw btf_ext data is not 4-byte
aligned ([0]).
While at it, also add missing const qualifier.
[0] Closes: https://github.com/libbpf/libbpf/issues/391
Fixes: 2993e0515bb4 ("tools/bpf: add support to read .BTF.ext sections")
Reported-by: Evgeny Vereshchagin <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf.c | 10 +++++-----
tools/lib/bpf/btf.h | 2 +-
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index 1b9341ef638b0..5fa64a7f0dda8 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -2626,15 +2626,11 @@ void btf_ext__free(struct btf_ext *btf_ext)
free(btf_ext);
}
-struct btf_ext *btf_ext__new(__u8 *data, __u32 size)
+struct btf_ext *btf_ext__new(const __u8 *data, __u32 size)
{
struct btf_ext *btf_ext;
int err;
- err = btf_ext_parse_hdr(data, size);
- if (err)
- return libbpf_err_ptr(err);
-
btf_ext = calloc(1, sizeof(struct btf_ext));
if (!btf_ext)
return libbpf_err_ptr(-ENOMEM);
@@ -2647,6 +2643,10 @@ struct btf_ext *btf_ext__new(__u8 *data, __u32 size)
}
memcpy(btf_ext->data, data, size);
+ err = btf_ext_parse_hdr(btf_ext->data, size);
+ if (err)
+ goto done;
+
if (btf_ext->hdr->hdr_len < offsetofend(struct btf_ext_header, line_info_len)) {
err = -EINVAL;
goto done;
diff --git a/tools/lib/bpf/btf.h b/tools/lib/bpf/btf.h
index 4a711f990904b..b0ee338a0cc87 100644
--- a/tools/lib/bpf/btf.h
+++ b/tools/lib/bpf/btf.h
@@ -80,7 +80,7 @@ LIBBPF_API int btf__get_map_kv_tids(const struct btf *btf, const char *map_name,
__u32 expected_value_size,
__u32 *key_type_id, __u32 *value_type_id);
-LIBBPF_API struct btf_ext *btf_ext__new(__u8 *data, __u32 size);
+LIBBPF_API struct btf_ext *btf_ext__new(const __u8 *data, __u32 size);
LIBBPF_API void btf_ext__free(struct btf_ext *btf_ext);
LIBBPF_API const void *btf_ext__get_raw_data(const struct btf_ext *btf_ext,
__u32 *size);
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 8cc7a1b2aca067397a016cdb971a5e6ad9b640c7 ]
A successful 'of_platform_populate()' call should be balanced by a
corresponding 'of_platform_depopulate()' call in the error handling path
of the probe, as already done in the remove function.
A successful 'venus_firmware_init()' call should be balanced by a
corresponding 'venus_firmware_deinit()' call in the error handling path
of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: f9799fcce4bb ("media: venus: firmware: register separate platform_device for firmware loader")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/core.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 84cd92628cfdc..1f0181b6353c9 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -349,11 +349,11 @@ static int venus_probe(struct platform_device *pdev)
ret = venus_firmware_init(core);
if (ret)
- goto err_runtime_disable;
+ goto err_of_depopulate;
ret = venus_boot(core);
if (ret)
- goto err_runtime_disable;
+ goto err_firmware_deinit;
ret = hfi_core_resume(core, true);
if (ret)
@@ -385,6 +385,10 @@ err_dev_unregister:
v4l2_device_unregister(&core->v4l2_dev);
err_venus_shutdown:
venus_shutdown(core);
+err_firmware_deinit:
+ venus_firmware_deinit(core);
+err_of_depopulate:
+ of_platform_depopulate(dev);
err_runtime_disable:
pm_runtime_put_noidle(dev);
pm_runtime_set_suspended(dev);
--
2.34.1
From: Weili Qian <[email protected]>
[ Upstream commit 3f9dd4c802b96626e869b2d29c8e401dabadd23e ]
When hisi_qm_resume() returns 0, it indicates that the device has started
successfully. If the device fails to start, hisi_qm_resume() needs to
return the actual error code to the caller instead of 0.
Fixes: d7ea53395b72 ("crypto: hisilicon - add runtime PM ops")
Signed-off-by: Weili Qian <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/hisilicon/qm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 369562d34d66a..ff1122153fbec 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -5986,7 +5986,7 @@ int hisi_qm_resume(struct device *dev)
if (ret)
pci_err(pdev, "failed to start qm(%d)\n", ret);
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(hisi_qm_resume);
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit d703c7a994ee34b7fa89baf21631fca0aa9f17fc ]
Don't erase key:
If key is erased before the crypto_finalize_.*_request() call, some
pending process will run with a key={ 0 }.
Moreover if the key is reset at end of request, it breaks xts chaining
mode, as for last xts block (in case input len is not a multiple of
block) a new AES request is started without calling again set_key().
Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index d13b262b36252..e2bcc4f98b0ae 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -674,8 +674,6 @@ static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err)
else
crypto_finalize_skcipher_request(cryp->engine, cryp->req,
err);
-
- memset(cryp->ctx->key, 0, cryp->ctx->keylen);
}
static int stm32_cryp_cpu_start(struct stm32_cryp *cryp)
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit fa97dc2d48b476ea98199d808d3248d285987e99 ]
This fixes the lrw autotest if lrw uses the CRYP as the AES block cipher
provider (as ecb(aes)). At end of request, CRYP should not update the IV
in case of ECB chaining mode. Indeed the ECB chaining mode never uses
the IV, but the software LRW chaining mode uses the IV field as
a counter and due to the (unexpected) update done by CRYP while the AES
block process, the counter get a wrong value when the IV overflow.
Fixes: 5f49f18d27cd ("crypto: stm32/cryp - update to return iv_out")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 061db567908ae..9943836a5c25c 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -644,7 +644,7 @@ static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err)
/* Phase 4 : output tag */
err = stm32_cryp_read_auth_tag(cryp);
- if (!err && (!(is_gcm(cryp) || is_ccm(cryp))))
+ if (!err && (!(is_gcm(cryp) || is_ccm(cryp) || is_ecb(cryp))))
stm32_cryp_get_iv(cryp);
if (cryp->sgs_copied) {
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit 39e6e699c7fb92bdb2617b596ca4a4ea35c5d2a7 ]
Some auto tests failed because driver wasn't returning the expected
error with some input size/iv value/tag size.
Now:
Return 0 early for empty buffer. (We don't need to start the engine for
an empty input buffer).
Accept any valid authsize for gcm(aes).
Return -EINVAL if iv for ccm(aes) is invalid.
Return -EINVAL if buffer size is a not a multiple of algorithm block size.
Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 114 +++++++++++++++++++++++++++++-
1 file changed, 113 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index e2bcc4f98b0ae..fd7fb73a4d450 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -799,7 +799,20 @@ static int stm32_cryp_aes_aead_setkey(struct crypto_aead *tfm, const u8 *key,
static int stm32_cryp_aes_gcm_setauthsize(struct crypto_aead *tfm,
unsigned int authsize)
{
- return authsize == AES_BLOCK_SIZE ? 0 : -EINVAL;
+ switch (authsize) {
+ case 4:
+ case 8:
+ case 12:
+ case 13:
+ case 14:
+ case 15:
+ case 16:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
}
static int stm32_cryp_aes_ccm_setauthsize(struct crypto_aead *tfm,
@@ -823,31 +836,61 @@ static int stm32_cryp_aes_ccm_setauthsize(struct crypto_aead *tfm,
static int stm32_cryp_aes_ecb_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_ECB | FLG_ENCRYPT);
}
static int stm32_cryp_aes_ecb_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_ECB);
}
static int stm32_cryp_aes_cbc_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_CBC | FLG_ENCRYPT);
}
static int stm32_cryp_aes_cbc_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_CBC);
}
static int stm32_cryp_aes_ctr_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_CTR | FLG_ENCRYPT);
}
static int stm32_cryp_aes_ctr_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_CTR);
}
@@ -861,53 +904,122 @@ static int stm32_cryp_aes_gcm_decrypt(struct aead_request *req)
return stm32_cryp_aead_crypt(req, FLG_AES | FLG_GCM);
}
+static inline int crypto_ccm_check_iv(const u8 *iv)
+{
+ /* 2 <= L <= 8, so 1 <= L' <= 7. */
+ if (iv[0] < 1 || iv[0] > 7)
+ return -EINVAL;
+
+ return 0;
+}
+
static int stm32_cryp_aes_ccm_encrypt(struct aead_request *req)
{
+ int err;
+
+ err = crypto_ccm_check_iv(req->iv);
+ if (err)
+ return err;
+
return stm32_cryp_aead_crypt(req, FLG_AES | FLG_CCM | FLG_ENCRYPT);
}
static int stm32_cryp_aes_ccm_decrypt(struct aead_request *req)
{
+ int err;
+
+ err = crypto_ccm_check_iv(req->iv);
+ if (err)
+ return err;
+
return stm32_cryp_aead_crypt(req, FLG_AES | FLG_CCM);
}
static int stm32_cryp_des_ecb_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_DES | FLG_ECB | FLG_ENCRYPT);
}
static int stm32_cryp_des_ecb_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_DES | FLG_ECB);
}
static int stm32_cryp_des_cbc_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_DES | FLG_CBC | FLG_ENCRYPT);
}
static int stm32_cryp_des_cbc_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_DES | FLG_CBC);
}
static int stm32_cryp_tdes_ecb_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_TDES | FLG_ECB | FLG_ENCRYPT);
}
static int stm32_cryp_tdes_ecb_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_TDES | FLG_ECB);
}
static int stm32_cryp_tdes_cbc_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_TDES | FLG_CBC | FLG_ENCRYPT);
}
static int stm32_cryp_tdes_cbc_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_TDES | FLG_CBC);
}
--
2.34.1
From: Kurt Kanzenbach <[email protected]>
[ Upstream commit 6cf01e451599da630ff1af529d61c5e4db4550ab ]
The switch supports PTP for UDP transport too. Therefore, add the missing static
FDB entries to ensure correct forwarding of these packets.
Fixes: ddd56dfe52c9 ("net: dsa: hellcreek: Add PTP clock support")
Signed-off-by: Kurt Kanzenbach <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/hirschmann/hellcreek.c | 64 ++++++++++++++++++++++++--
1 file changed, 60 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 2dd1227e0c357..950a54ec4b59b 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -1052,7 +1052,7 @@ static void hellcreek_setup_tc_identity_mapping(struct hellcreek *hellcreek)
static int hellcreek_setup_fdb(struct hellcreek *hellcreek)
{
- static struct hellcreek_fdb_entry ptp = {
+ static struct hellcreek_fdb_entry l2_ptp = {
/* MAC: 01-1B-19-00-00-00 */
.mac = { 0x01, 0x1b, 0x19, 0x00, 0x00, 0x00 },
.portmask = 0x03, /* Management ports */
@@ -1063,7 +1063,29 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek)
.reprio_tc = 6, /* TC: 6 as per IEEE 802.1AS */
.reprio_en = 1,
};
- static struct hellcreek_fdb_entry p2p = {
+ static struct hellcreek_fdb_entry udp4_ptp = {
+ /* MAC: 01-00-5E-00-01-81 */
+ .mac = { 0x01, 0x00, 0x5e, 0x00, 0x01, 0x81 },
+ .portmask = 0x03, /* Management ports */
+ .age = 0,
+ .is_obt = 0,
+ .pass_blocked = 0,
+ .is_static = 1,
+ .reprio_tc = 6,
+ .reprio_en = 1,
+ };
+ static struct hellcreek_fdb_entry udp6_ptp = {
+ /* MAC: 33-33-00-00-01-81 */
+ .mac = { 0x33, 0x33, 0x00, 0x00, 0x01, 0x81 },
+ .portmask = 0x03, /* Management ports */
+ .age = 0,
+ .is_obt = 0,
+ .pass_blocked = 0,
+ .is_static = 1,
+ .reprio_tc = 6,
+ .reprio_en = 1,
+ };
+ static struct hellcreek_fdb_entry l2_p2p = {
/* MAC: 01-80-C2-00-00-0E */
.mac = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e },
.portmask = 0x03, /* Management ports */
@@ -1074,6 +1096,28 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek)
.reprio_tc = 6, /* TC: 6 as per IEEE 802.1AS */
.reprio_en = 1,
};
+ static struct hellcreek_fdb_entry udp4_p2p = {
+ /* MAC: 01-00-5E-00-00-6B */
+ .mac = { 0x01, 0x00, 0x5e, 0x00, 0x00, 0x6b },
+ .portmask = 0x03, /* Management ports */
+ .age = 0,
+ .is_obt = 0,
+ .pass_blocked = 1,
+ .is_static = 1,
+ .reprio_tc = 6,
+ .reprio_en = 1,
+ };
+ static struct hellcreek_fdb_entry udp6_p2p = {
+ /* MAC: 33-33-00-00-00-6B */
+ .mac = { 0x33, 0x33, 0x00, 0x00, 0x00, 0x6b },
+ .portmask = 0x03, /* Management ports */
+ .age = 0,
+ .is_obt = 0,
+ .pass_blocked = 1,
+ .is_static = 1,
+ .reprio_tc = 6,
+ .reprio_en = 1,
+ };
static struct hellcreek_fdb_entry stp = {
/* MAC: 01-80-C2-00-00-00 */
.mac = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 },
@@ -1088,10 +1132,22 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek)
int ret;
mutex_lock(&hellcreek->reg_lock);
- ret = __hellcreek_fdb_add(hellcreek, &ptp);
+ ret = __hellcreek_fdb_add(hellcreek, &l2_ptp);
+ if (ret)
+ goto out;
+ ret = __hellcreek_fdb_add(hellcreek, &udp4_ptp);
+ if (ret)
+ goto out;
+ ret = __hellcreek_fdb_add(hellcreek, &udp6_ptp);
+ if (ret)
+ goto out;
+ ret = __hellcreek_fdb_add(hellcreek, &l2_p2p);
+ if (ret)
+ goto out;
+ ret = __hellcreek_fdb_add(hellcreek, &udp4_p2p);
if (ret)
goto out;
- ret = __hellcreek_fdb_add(hellcreek, &p2p);
+ ret = __hellcreek_fdb_add(hellcreek, &udp6_p2p);
if (ret)
goto out;
ret = __hellcreek_fdb_add(hellcreek, &stp);
--
2.34.1
From: Stephen Boyd <[email protected]>
[ Upstream commit 0b665d4af35837f0a0ae63135b84a3c187c1db3b ]
Set the maximum register to 0xff so we can dump the registers for this
device in debugfs.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Cc: Rob Clark <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 41d48a393e7f5..4d08246f930c3 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -188,6 +188,7 @@ static const struct regmap_config ti_sn65dsi86_regmap_config = {
.val_bits = 8,
.volatile_table = &ti_sn_bridge_volatile_table,
.cache_type = REGCACHE_NONE,
+ .max_register = 0xFF,
};
static void ti_sn65dsi86_write_u16(struct ti_sn65dsi86 *pdata,
--
2.34.1
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 8fc9a77bc64e1f23d07953439817d8402ac9706f ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_threaded_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_threaded_irq() with the
invalid IRQ #s.
Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoC")
Signed-off-by: Sergey Shtylyov <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/meson-mx-sdio.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index d4a48916bfb67..3a19a05ef55a7 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -662,6 +662,11 @@ static int meson_mx_mmc_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto error_free_mmc;
+ }
+
ret = devm_request_threaded_irq(host->controller_dev, irq,
meson_mx_mmc_irq,
meson_mx_mmc_irq_thread, IRQF_ONESHOT,
--
2.34.1
From: Vincent Donnefort <[email protected]>
[ Upstream commit 8b4e74ccb582797f6f0b0a50372ebd9fd2372a27 ]
select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread, where the selected CPU is the previous one. However, the current
condition for this exit path is incomplete. A task can wake up from an
interrupt context (e.g. hrtimer), while a per-CPU kthread is running. A
such scenario would spuriously trigger the special case described above.
Also, a recent change made the idle task like a regular per-CPU kthread,
hence making that situation more likely to happen
(is_per_cpu_kthread(swapper) being true now).
Checking for task context makes sure select_idle_sibling() will not
interpret a wake up from any other context as a wake up by a per-CPU
kthread.
Fixes: 52262ee567ad ("sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression")
Signed-off-by: Vincent Donnefort <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 6f16dfb742462..c6cb8832796b5 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6429,6 +6429,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
* pattern is IO completions.
*/
if (is_per_cpu_kthread(current) &&
+ in_task() &&
prev == smp_processor_id() &&
this_rq()->nr_running <= 1) {
return prev;
--
2.34.1
From: Paul Gerber <[email protected]>
[ Upstream commit 3de89d8842a2b5d3dd22ebf97dd561ae0a330948 ]
The i.MX 8MP has a ADC_PD bit in the TMU_TER register that controls the
operating mode of the ADC:
* 0 means normal operating mode
* 1 means power down mode
When enabling/disabling the TMU, the ADC operating mode must be set
accordingly.
i.MX 8M Mini & Nano are lacking this bit.
Signed-off-by: Paul Gerber <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Fixes: 2b8f1f0337c5 ("thermal: imx8mm: Add i.MX8MP support")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/imx8mm_thermal.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index 7442e013738f8..af666bd9e8d4d 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -21,6 +21,7 @@
#define TPS 0x4
#define TRITSR 0x20 /* TMU immediate temp */
+#define TER_ADC_PD BIT(30)
#define TER_EN BIT(31)
#define TRITSR_TEMP0_VAL_MASK 0xff
#define TRITSR_TEMP1_VAL_MASK 0xff0000
@@ -113,6 +114,8 @@ static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable)
val = readl_relaxed(tmu->base + TER);
val = enable ? (val | TER_EN) : (val & ~TER_EN);
+ if (tmu->socdata->version == TMU_VER2)
+ val = enable ? (val & ~TER_ADC_PD) : (val | TER_ADC_PD);
writel_relaxed(val, tmu->base + TER);
}
--
2.34.1
From: Stefan Riedmueller <[email protected]>
commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream.
There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.
Signed-off-by: Stefan Riedmueller <[email protected]>
Cc: [email protected]
Acked-by: Han Xu <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 ---------
1 file changed, 9 deletions(-)
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -1054,15 +1054,6 @@ static int gpmi_get_clks(struct gpmi_nan
r->clock[i] = clk;
}
- if (GPMI_IS_MX6(this))
- /*
- * Set the default value for the gpmi clock.
- *
- * If you want to use the ONFI nand which is in the
- * Synchronous Mode, you should change the clock as you need.
- */
- clk_set_rate(r->clock[0], 22000000);
-
return 0;
err_clock:
From: Alexandre Ghiti <[email protected]>
commit db1503d355a79d1d4255a9996f20e72848b74a56 upstream.
CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was
preempted by !MMU case right before.
In addition, the move of the kernel mapping at the end of the address
space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET
at the same address as the kernel mapping.
Reported-by: Geert Uytterhoeven <[email protected]>
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Alexandre Ghiti <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Tested-by: Conor Dooley <[email protected]>
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/Kconfig | 23 ++---------------------
arch/riscv/configs/nommu_k210_defconfig | 2 --
arch/riscv/configs/nommu_k210_sdcard_defconfig | 2 --
arch/riscv/configs/nommu_virt_defconfig | 1 -
4 files changed, 2 insertions(+), 26 deletions(-)
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -158,10 +158,9 @@ config PA_BITS
config PAGE_OFFSET
hex
- default 0xC0000000 if 32BIT && MAXPHYSMEM_1GB
+ default 0xC0000000 if 32BIT
default 0x80000000 if 64BIT && !MMU
- default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
- default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
+ default 0xffffffe000000000 if 64BIT
config KASAN_SHADOW_OFFSET
hex
@@ -270,24 +269,6 @@ config MODULE_SECTIONS
bool
select HAVE_MOD_ARCH_SPECIFIC
-choice
- prompt "Maximum Physical Memory"
- default MAXPHYSMEM_1GB if 32BIT
- default MAXPHYSMEM_2GB if 64BIT && CMODEL_MEDLOW
- default MAXPHYSMEM_128GB if 64BIT && CMODEL_MEDANY
-
- config MAXPHYSMEM_1GB
- depends on 32BIT
- bool "1GiB"
- config MAXPHYSMEM_2GB
- depends on 64BIT && CMODEL_MEDLOW
- bool "2GiB"
- config MAXPHYSMEM_128GB
- depends on 64BIT && CMODEL_MEDANY
- bool "128GiB"
-endchoice
-
-
config SMP
bool "Symmetric Multi-Processing"
help
--- a/arch/riscv/configs/nommu_k210_defconfig
+++ b/arch/riscv/configs/nommu_k210_defconfig
@@ -29,8 +29,6 @@ CONFIG_EMBEDDED=y
CONFIG_SLOB=y
# CONFIG_MMU is not set
CONFIG_SOC_CANAAN=y
-CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
-CONFIG_MAXPHYSMEM_2GB=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_CMDLINE="earlycon console=ttySIF0"
--- a/arch/riscv/configs/nommu_k210_sdcard_defconfig
+++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig
@@ -21,8 +21,6 @@ CONFIG_EMBEDDED=y
CONFIG_SLOB=y
# CONFIG_MMU is not set
CONFIG_SOC_CANAAN=y
-CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
-CONFIG_MAXPHYSMEM_2GB=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_CMDLINE="earlycon console=ttySIF0 rootdelay=2 root=/dev/mmcblk0p1 ro"
--- a/arch/riscv/configs/nommu_virt_defconfig
+++ b/arch/riscv/configs/nommu_virt_defconfig
@@ -27,7 +27,6 @@ CONFIG_SLOB=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_MMU is not set
CONFIG_SOC_VIRT=y
-CONFIG_MAXPHYSMEM_2GB=y
CONFIG_SMP=y
CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0"
CONFIG_CMDLINE_FORCE=y
From: Li Hua <[email protected]>
[ Upstream commit 9b58e976b3b391c0cf02e038d53dd0478ed3013c ]
When rt_runtime is modified from -1 to a valid control value, it may
cause the task to be throttled all the time. Operations like the following
will trigger the bug. E.g:
1. echo -1 > /proc/sys/kernel/sched_rt_runtime_us
2. Run a FIFO task named A that executes while(1)
3. echo 950000 > /proc/sys/kernel/sched_rt_runtime_us
When rt_runtime is -1, The rt period timer will not be activated when task
A enqueued. And then the task will be throttled after setting rt_runtime to
950,000. The task will always be throttled because the rt period timer is
not activated.
Fixes: d0b27fa77854 ("sched: rt-group: synchonised bandwidth period")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Li Hua <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/rt.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index bfef3f39b5552..54f9bb3f15605 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -52,11 +52,8 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime)
rt_b->rt_period_timer.function = sched_rt_period_timer;
}
-static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
+static inline void do_start_rt_bandwidth(struct rt_bandwidth *rt_b)
{
- if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
- return;
-
raw_spin_lock(&rt_b->rt_runtime_lock);
if (!rt_b->rt_period_active) {
rt_b->rt_period_active = 1;
@@ -75,6 +72,14 @@ static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
raw_spin_unlock(&rt_b->rt_runtime_lock);
}
+static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
+{
+ if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
+ return;
+
+ do_start_rt_bandwidth(rt_b);
+}
+
void init_rt_rq(struct rt_rq *rt_rq)
{
struct rt_prio_array *array;
@@ -1029,13 +1034,17 @@ static void update_curr_rt(struct rq *rq)
for_each_sched_rt_entity(rt_se) {
struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
+ int exceeded;
if (sched_rt_runtime(rt_rq) != RUNTIME_INF) {
raw_spin_lock(&rt_rq->rt_runtime_lock);
rt_rq->rt_time += delta_exec;
- if (sched_rt_runtime_exceeded(rt_rq))
+ exceeded = sched_rt_runtime_exceeded(rt_rq);
+ if (exceeded)
resched_curr(rq);
raw_spin_unlock(&rt_rq->rt_runtime_lock);
+ if (exceeded)
+ do_start_rt_bandwidth(sched_rt_bandwidth(rt_rq));
}
}
}
@@ -2785,8 +2794,12 @@ static int sched_rt_global_validate(void)
static void sched_rt_do_global(void)
{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
def_rt_bandwidth.rt_runtime = global_rt_runtime();
def_rt_bandwidth.rt_period = ns_to_ktime(global_rt_period());
+ raw_spin_unlock_irqrestore(&def_rt_bandwidth.rt_runtime_lock, flags);
}
int sched_rt_handler(struct ctl_table *table, int write, void *buffer,
--
2.34.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit c02b360ca67ebeb9de07b47b2fe53f964c2561d1 ]
Currently Soundcard has 1 rx device for headset and SoundWire Speaker Playback.
This setup has issues, ex if we try to play on headset the audio stream is
also sent to SoundWire Speakers and we will hear sound in both headsets and speakers.
Make a separate device for Speakers and Headset so that the streams are
different and handled properly.
Fixes: 45021d35fcb2 ("arm64: dts: qcom: c630: Enable audio support")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Tested-by: Steev Klimaszewski <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 2ba23aa582a18..617a634ac9051 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -518,6 +518,10 @@
dai@1 {
reg = <1>;
};
+
+ dai@2 {
+ reg = <2>;
+ };
};
&sound {
@@ -530,6 +534,7 @@
"SpkrLeft IN", "SPK1 OUT",
"SpkrRight IN", "SPK2 OUT",
"MM_DL1", "MultiMedia1 Playback",
+ "MM_DL3", "MultiMedia3 Playback",
"MultiMedia2 Capture", "MM_UL2";
mm1-dai-link {
@@ -546,6 +551,13 @@
};
};
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
slim-dai-link {
link-name = "SLIM Playback";
cpu {
@@ -575,6 +587,21 @@
sound-dai = <&wcd9340 1>;
};
};
+
+ slim-wcd-dai-link {
+ link-name = "SLIM WCD Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_1_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 2>;
+ };
+ };
};
&tlmm {
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit 6c12e742785bf9333faf60bfb96575bdd763448e ]
Delete extraneous lines in probe error handling code: pm was
disabled twice.
Fixes: 65f9aa36ee47 ("crypto: stm32/cryp - Add power management support")
Reported-by: Marek Vasut <[email protected]>
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index fd7fb73a4d450..061db567908ae 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -2134,8 +2134,6 @@ err_engine1:
list_del(&cryp->list);
spin_unlock(&cryp_list.lock);
- pm_runtime_disable(dev);
- pm_runtime_put_noidle(dev);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
--
2.34.1
From: Hector Martin <[email protected]>
[ Upstream commit 95c07247399536f83b89dc60cfe7b279d17e69f6 ]
Move the cs_setup delay to the end of spi_set_cs.
>From include/linux/spi/spi.h:
* @cs_setup: delay to be introduced by the controller after CS is
asserted
The cs_setup delay needs to happen *after* CS is asserted, that is, at
the end of spi_set_cs, not at the beginning. Otherwise we're just
delaying before the SPI transaction starts at all, which isn't very
useful.
No drivers use this right now, but that is likely to change soon with an
upcoming Apple SPI HID transport driver.
Fixes: 25093bdeb6bc ("spi: implement SW control for CS times")
Signed-off-by: Hector Martin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 97b5a811bd7f7..a42b9e8521ce0 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -868,12 +868,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
spi->controller->last_cs_enable = enable;
spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH;
- if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
- !spi->controller->set_cs_timing) {
- if (activate)
- spi_delay_exec(&spi->cs_setup, NULL);
- else
- spi_delay_exec(&spi->cs_hold, NULL);
+ if ((spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
+ !spi->controller->set_cs_timing) && !activate) {
+ spi_delay_exec(&spi->cs_hold, NULL);
}
if (spi->mode & SPI_CS_HIGH)
@@ -915,7 +912,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
!spi->controller->set_cs_timing) {
- if (!activate)
+ if (activate)
+ spi_delay_exec(&spi->cs_setup, NULL);
+ else
spi_delay_exec(&spi->cs_inactive, NULL);
}
}
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 4e8a5edac5010820e7c5303fc96f5a262e096bb6 ]
On 32-bit, the first entry might be at 0/NULL, but that's
strange and leads to issues, e.g. where we check "if (ret)".
Use a IOREMAP_BIAS/IOREMAP_MASK of 0x80000000UL to avoid
this. This then requires reducing the number of areas (via
MAX_AREAS), but we still have 128 areas, which is enough.
Fixes: ca2e334232b6 ("lib: add iomem emulation (logic_iomem)")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/logic_iomem.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/lib/logic_iomem.c b/lib/logic_iomem.c
index 54fa601f3300b..549b22d4bcde1 100644
--- a/lib/logic_iomem.c
+++ b/lib/logic_iomem.c
@@ -21,15 +21,15 @@ struct logic_iomem_area {
#define AREA_SHIFT 24
#define MAX_AREA_SIZE (1 << AREA_SHIFT)
-#define MAX_AREAS ((1ULL<<32) / MAX_AREA_SIZE)
+#define MAX_AREAS ((1U << 31) / MAX_AREA_SIZE)
#define AREA_BITS ((MAX_AREAS - 1) << AREA_SHIFT)
#define AREA_MASK (MAX_AREA_SIZE - 1)
#ifdef CONFIG_64BIT
#define IOREMAP_BIAS 0xDEAD000000000000UL
#define IOREMAP_MASK 0xFFFFFFFF00000000UL
#else
-#define IOREMAP_BIAS 0
-#define IOREMAP_MASK 0
+#define IOREMAP_BIAS 0x80000000UL
+#define IOREMAP_MASK 0x80000000UL
#endif
static DEFINE_MUTEX(regions_mtx);
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit d73820df6437b5d0a57be53faf39db46a0264b3a ]
There were a few 32-bit compile warnings that of course
turned into errors with -Werror, fix the 32-bit build.
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Reported-by: Al Viro <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/drivers/virt-pci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c
index c080666330234..0ab58016db22f 100644
--- a/arch/um/drivers/virt-pci.c
+++ b/arch/um/drivers/virt-pci.c
@@ -181,15 +181,15 @@ static unsigned long um_pci_cfgspace_read(void *priv, unsigned int offset,
/* buf->data is maximum size - we may only use parts of it */
struct um_pci_message_buffer *buf;
u8 *data;
- unsigned long ret = ~0ULL;
+ unsigned long ret = ULONG_MAX;
if (!dev)
- return ~0ULL;
+ return ULONG_MAX;
buf = get_cpu_var(um_pci_msg_bufs);
data = buf->data;
- memset(data, 0xff, sizeof(data));
+ memset(buf->data, 0xff, sizeof(buf->data));
switch (size) {
case 1:
@@ -304,7 +304,7 @@ static unsigned long um_pci_bar_read(void *priv, unsigned int offset,
/* buf->data is maximum size - we may only use parts of it */
struct um_pci_message_buffer *buf;
u8 *data;
- unsigned long ret = ~0ULL;
+ unsigned long ret = ULONG_MAX;
buf = get_cpu_var(um_pci_msg_bufs);
data = buf->data;
--
2.34.1
From: Rameshkumar Sundaram <[email protected]>
[ Upstream commit ba53ee7f7f38cf0592b8be1dcdabaf8f7535f8c1 ]
frag_timer will be created & initialized for stations when
they associate and will be deleted during every key installation
while flushing old fragments.
For AP interface self peer will be created and Group keys
will be installed for this peer, but there will be no real
Station entry & hence frag_timer won't be created and
initialized, deleting such uninitialized kernel timers causes below
warnings and backtraces printed with CONFIG_DEBUG_OBJECTS_TIMERS
enabled.
[ 177.828008] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
[ 177.836833] WARNING: CPU: 3 PID: 188 at lib/debugobjects.c:508 debug_print_object+0xb0/0xf0
[ 177.845185] Modules linked in: ath11k_pci ath11k qmi_helpers qrtr_mhi qrtr ns mhi
[ 177.852679] CPU: 3 PID: 188 Comm: hostapd Not tainted 5.14.0-rc3-32919-g4034139e1838-dirty #14
[ 177.865805] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 177.871804] pc : debug_print_object+0xb0/0xf0
[ 177.876155] lr : debug_print_object+0xb0/0xf0
[ 177.880505] sp : ffffffc01169b5a0
[ 177.883810] x29: ffffffc01169b5a0 x28: ffffff80081c2320 x27: ffffff80081c4078
[ 177.890942] x26: ffffff8003fe8f28 x25: ffffff8003de9890 x24: ffffffc01134d738
[ 177.898075] x23: ffffffc010948f20 x22: ffffffc010b2d2e0 x21: ffffffc01169b628
[ 177.905206] x20: ffffffc01134d700 x19: ffffffc010c80d98 x18: 00000000000003f6
[ 177.912339] x17: 203a657079742074 x16: 63656a626f202930 x15: 0000000000000152
[ 177.919471] x14: 0000000000000152 x13: 00000000ffffffea x12: ffffffc010d732e0
[ 177.926603] x11: 0000000000000003 x10: ffffffc010d432a0 x9 : ffffffc010d432f8
[ 177.933735] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 0000000000000001
[ 177.940866] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[ 177.947997] x2 : ffffffc010c93240 x1 : ffffff80023624c0 x0 : 0000000000000054
[ 177.955130] Call trace:
[ 177.957567] debug_print_object+0xb0/0xf0
[ 177.961570] debug_object_assert_init+0x124/0x178
[ 177.966269] try_to_del_timer_sync+0x1c/0x70
[ 177.970536] del_timer_sync+0x30/0x50
[ 177.974192] ath11k_peer_frags_flush+0x34/0x68 [ath11k]
[ 177.979439] ath11k_mac_op_set_key+0x1e4/0x338 [ath11k]
[ 177.984673] ieee80211_key_enable_hw_accel+0xc8/0x3d0
[ 177.989722] ieee80211_key_replace+0x360/0x740
[ 177.994160] ieee80211_key_link+0x16c/0x210
[ 177.998337] ieee80211_add_key+0x138/0x338
[ 178.002426] nl80211_new_key+0xfc/0x258
[ 178.006257] genl_family_rcv_msg_doit.isra.17+0xd8/0x120
[ 178.011565] genl_rcv_msg+0xd8/0x1c8
[ 178.015134] netlink_rcv_skb+0x38/0xf8
[ 178.018877] genl_rcv+0x34/0x48
[ 178.022012] netlink_unicast+0x174/0x230
[ 178.025928] netlink_sendmsg+0x188/0x388
[ 178.029845] ____sys_sendmsg+0x218/0x250
[ 178.033763] ___sys_sendmsg+0x68/0x90
[ 178.037418] __sys_sendmsg+0x44/0x88
[ 178.040988] __arm64_sys_sendmsg+0x20/0x28
[ 178.045077] invoke_syscall.constprop.5+0x54/0xe0
[ 178.049776] do_el0_svc+0x74/0xc0
[ 178.053084] el0_svc+0x10/0x18
[ 178.056133] el0t_64_sync_handler+0x88/0xb0
[ 178.060310] el0t_64_sync+0x148/0x14c
[ 178.063966] ---[ end trace 8a5cf0bf9d34a058 ]---
Add changes to not to delete frag timer for peers during
group key installation.
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Fixes: c3944a562102 ("ath11k: Clear the fragment cache during key install")
Signed-off-by: Rameshkumar Sundaram <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 2df60c74809d3..9dfa77389c4da 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2791,7 +2791,7 @@ static int ath11k_mac_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
/* flush the fragments cache during key (re)install to
* ensure all frags in the new frag list belong to the same key.
*/
- if (peer && cmd == SET_KEY)
+ if (peer && sta && cmd == SET_KEY)
ath11k_peer_frags_flush(ar, peer);
spin_unlock_bh(&ab->base_lock);
--
2.34.1
From: Anders Roxell <[email protected]>
[ Upstream commit a531b0c23c0fc68ad758cc31a74cf612a4dafeb0 ]
Building selftests/clone3 with clang warns about enumeration not handled
in switch case:
clone3.c:54:10: warning: enumeration value 'CLONE3_ARGS_NO_TEST' not handled in switch [-Wswitch]
switch (test_mode) {
^
Add the missing switch case with a comment.
Fixes: 17a810699c18 ("selftests: add tests for clone3()")
Signed-off-by: Anders Roxell <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/clone3/clone3.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c
index 42be3b9258301..076cf4325f783 100644
--- a/tools/testing/selftests/clone3/clone3.c
+++ b/tools/testing/selftests/clone3/clone3.c
@@ -52,6 +52,12 @@ static int call_clone3(uint64_t flags, size_t size, enum test_mode test_mode)
size = sizeof(struct __clone_args);
switch (test_mode) {
+ case CLONE3_ARGS_NO_TEST:
+ /*
+ * Uses default 'flags' and 'SIGCHLD'
+ * assignment.
+ */
+ break;
case CLONE3_ARGS_ALL_0:
args.flags = 0;
args.exit_signal = 0;
--
2.34.1
From: Baruch Siach <[email protected]>
[ Upstream commit 72cb4c48a46a7cfa58eb5842c0d3672ddd5bd9ad ]
There must be three parameters in gpio-ranges property. Fixes this not
very helpful error message:
OF: /soc/pinctrl@1000000: (null) = 3 found 3
Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support")
Cc: Sricharan R <[email protected]>
Signed-off-by: Baruch Siach <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/8a744cfd96aff5754bfdcf7298d208ddca5b319a.1638862030.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 7b6205c180df1..ce4c2b4a5fc07 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -221,7 +221,7 @@
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 80>;
+ gpio-ranges = <&tlmm 0 0 80>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.34.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit 99d8690aae4b2f0d1d90075de355ac087f820a66 ]
One device_add is called disk->ev will be freed by disk_release, so we
should free it twice. Fix this by allocating disk->ev after device_add
so that the extra local unwinding can be removed entirely.
Based on an earlier patch from Tetsuo Handa.
Reported-by: syzbot <[email protected]>
Tested-by: syzbot <[email protected]>
Fixes: 83cbce9574462c6b ("block: add error handling for device_add_disk / add_disk")
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/genhd.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/block/genhd.c b/block/genhd.c
index f091a60dcf1ea..22f899615801c 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -432,10 +432,6 @@ int device_add_disk(struct device *parent, struct gendisk *disk,
disk->flags |= GENHD_FL_EXT_DEVT;
}
- ret = disk_alloc_events(disk);
- if (ret)
- goto out_free_ext_minor;
-
/* delay uevents, until we scanned partition table */
dev_set_uevent_suppress(ddev, 1);
@@ -446,7 +442,12 @@ int device_add_disk(struct device *parent, struct gendisk *disk,
ddev->devt = MKDEV(disk->major, disk->first_minor);
ret = device_add(ddev);
if (ret)
- goto out_disk_release_events;
+ goto out_free_ext_minor;
+
+ ret = disk_alloc_events(disk);
+ if (ret)
+ goto out_device_del;
+
if (!sysfs_deprecated) {
ret = sysfs_create_link(block_depr, &ddev->kobj,
kobject_name(&ddev->kobj));
@@ -534,8 +535,6 @@ out_del_block_link:
sysfs_remove_link(block_depr, dev_name(ddev));
out_device_del:
device_del(ddev);
-out_disk_release_events:
- disk_release_events(disk);
out_free_ext_minor:
if (disk->major == BLOCK_EXT_MAJOR)
blk_free_ext_minor(disk->first_minor);
--
2.34.1
From: Sean Christopherson <[email protected]>
commit 869c70609248102f3a2e95a39b6233ff6ea2c932 upstream.
Use what is currently the SMP=y version of riscv_cpuid_to_hartid_mask()
for both SMP=y and SMP=n to fix a build failure with KVM=m and SMP=n due
to boot_cpu_hartid not being exported. This also fixes a second bug
where the SMP=n version assumes the sole CPU in the system is in the
incoming mask, which may not hold true in kvm_riscv_vcpu_sbi_ecall() if
the KVM guest VM has multiple vCPUs (on a SMP=n system).
Fixes: 1ef46c231df4 ("RISC-V: Implement new SBI v0.2 extensions")
Reported-by: Adam Borowski <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/include/asm/smp.h | 10 ++--------
arch/riscv/kernel/setup.c | 10 ++++++++++
arch/riscv/kernel/smp.c | 10 ----------
3 files changed, 12 insertions(+), 18 deletions(-)
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -43,7 +43,6 @@ void arch_send_call_function_ipi_mask(st
void arch_send_call_function_single_ipi(int cpu);
int riscv_hartid_to_cpuid(int hartid);
-void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
/* Set custom IPI operations */
void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops);
@@ -85,13 +84,6 @@ static inline unsigned long cpuid_to_har
return boot_cpu_hartid;
}
-static inline void riscv_cpuid_to_hartid_mask(const struct cpumask *in,
- struct cpumask *out)
-{
- cpumask_clear(out);
- cpumask_set_cpu(boot_cpu_hartid, out);
-}
-
static inline void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
{
}
@@ -102,6 +94,8 @@ static inline void riscv_clear_ipi(void)
#endif /* CONFIG_SMP */
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
+
#if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
bool cpu_has_hotplug(unsigned int cpu);
#else
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -59,6 +59,16 @@ atomic_t hart_lottery __section(".sdata"
unsigned long boot_cpu_hartid;
static DEFINE_PER_CPU(struct cpu, cpu_devices);
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
+{
+ int cpu;
+
+ cpumask_clear(out);
+ for_each_cpu(cpu, in)
+ cpumask_set_cpu(cpuid_to_hartid_map(cpu), out);
+}
+EXPORT_SYMBOL_GPL(riscv_cpuid_to_hartid_mask);
+
/*
* Place kernel memory regions on the resource tree so that
* kexec-tools can retrieve them from /proc/iomem. While there
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -59,16 +59,6 @@ int riscv_hartid_to_cpuid(int hartid)
return -ENOENT;
}
-void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
-{
- int cpu;
-
- cpumask_clear(out);
- for_each_cpu(cpu, in)
- cpumask_set_cpu(cpuid_to_hartid_map(cpu), out);
-}
-EXPORT_SYMBOL_GPL(riscv_cpuid_to_hartid_mask);
-
bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
{
return phys_id == cpuid_to_hartid_map(cpu);
From: Tudor Ambarus <[email protected]>
[ Upstream commit 4f4b9b5895614eb2e2b5f4cab7858f44bd113e1b ]
The driver wrongly assummed that tx_submit() will start the transfer,
which is not the case, now that the at_xdmac driver is fixed. tx_submit
is supposed to push the current transaction descriptor to a pending queue,
waiting for issue_pending to be called. issue_pending must start the
transfer, not tx_submit.
Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 16ff972decfef..dd350c5908804 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1009,6 +1009,8 @@ static void atmel_tx_dma(struct uart_port *port)
atmel_port->cookie_tx);
return;
}
+
+ dma_async_issue_pending(chan);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1269,6 +1271,8 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
goto chan_err;
}
+ dma_async_issue_pending(atmel_port->chan_rx);
+
return 0;
chan_err:
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit e64fbcaa7a666f16329b1c67af15ea501bc84586 ]
Clang (13) doesn't get the jokes about specifying libraries to link in
cclags of individual .o objects:
clang-13: warning: -lm: 'linker' input unused [-Wunused-command-line-argument]
[ ... ]
LD samples/bpf/xdp_redirect_cpu
LD samples/bpf/xdp_redirect_map_multi
LD samples/bpf/xdp_redirect_map
LD samples/bpf/xdp_redirect
LD samples/bpf/xdp_monitor
/usr/bin/ld: samples/bpf/xdp_sample_user.o: in function `sample_summary_print':
xdp_sample_user.c:(.text+0x84c): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x870): undefined reference to `ceil'
/usr/bin/ld: xdp_sample_user.c:(.text+0x8cf): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x8f3): undefined reference to `ceil'
[ more ]
Specify '-lm' as ldflags for all xdp_sample_user.o users in the main
Makefile and remove it from ccflags of ^ in Makefile.target -- just
like it's done for all other samples. This works with all compilers.
Fixes: 6e1051a54e31 ("samples: bpf: Convert xdp_monitor to XDP samples helper")
Fixes: b926c55d856c ("samples: bpf: Convert xdp_redirect to XDP samples helper")
Fixes: e531a220cc59 ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Fixes: bbe65865aa05 ("samples: bpf: Convert xdp_redirect_map to XDP samples helper")
Fixes: 594a116b2aa1 ("samples: bpf: Convert xdp_redirect_map_multi to XDP samples helper")
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/Makefile | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 8ac8573946e1a..c6e38e43c3fd0 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -213,6 +213,11 @@ TPROGS_LDFLAGS := -L$(SYSROOT)/usr/lib
endif
TPROGS_LDLIBS += $(LIBBPF) -lelf -lz
+TPROGLDLIBS_xdp_monitor += -lm
+TPROGLDLIBS_xdp_redirect += -lm
+TPROGLDLIBS_xdp_redirect_cpu += -lm
+TPROGLDLIBS_xdp_redirect_map += -lm
+TPROGLDLIBS_xdp_redirect_map_multi += -lm
TPROGLDLIBS_tracex4 += -lrt
TPROGLDLIBS_trace_output += -lrt
TPROGLDLIBS_map_perf_test += -lrt
@@ -342,7 +347,7 @@ $(obj)/hbm_edt_kern.o: $(src)/hbm.h $(src)/hbm_kern.h
# Override includes for xdp_sample_user.o because $(srctree)/usr/include in
# TPROGS_CFLAGS causes conflicts
-XDP_SAMPLE_CFLAGS += -Wall -O2 -lm \
+XDP_SAMPLE_CFLAGS += -Wall -O2 \
-I$(src)/../../tools/include \
-I$(src)/../../tools/include/uapi \
-I$(LIBBPF_INCLUDE) \
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 5ada78b26f935f8751852dffa24f6b545b1d2517 ]
When not specifying num-strings in the DT the default is used, but +1 is
added to it which turns WLED3 into 4 and WLED4/5 into 5 strings instead
of 3 and 4 respectively, causing out-of-bounds reads and register
read/writes. This +1 exists for a deficiency in the DT parsing code,
and is simply omitted entirely - solving this oob issue - by parsing the
property separately much like qcom,enabled-strings.
This also enables more stringent checks on the maximum value when
qcom,enabled-strings is provided in the DT, by parsing num-strings after
enabled-strings to allow it to check against (and in a subsequent patch
override) the length of enabled-strings: it is invalid to set
num-strings higher than that.
The DT currently utilizes it to get around an incorrect fixed read of
four elements from that array (has been addressed in a prior patch) by
setting a lower num-strings where desired.
Fixes: 93c64f1ea1e8 ("leds: add Qualcomm PM8941 WLED driver")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-By: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 48 ++++++++++-------------------
1 file changed, 16 insertions(+), 32 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index d413b913fef32..dbcbeda655192 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1256,21 +1256,6 @@ static const struct wled_var_cfg wled5_ovp_cfg = {
.size = 16,
};
-static u32 wled3_num_strings_values_fn(u32 idx)
-{
- return idx + 1;
-}
-
-static const struct wled_var_cfg wled3_num_strings_cfg = {
- .fn = wled3_num_strings_values_fn,
- .size = 3,
-};
-
-static const struct wled_var_cfg wled4_num_strings_cfg = {
- .fn = wled3_num_strings_values_fn,
- .size = 4,
-};
-
static u32 wled3_switch_freq_values_fn(u32 idx)
{
return 19200 / (2 * (1 + idx));
@@ -1344,11 +1329,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled3_num_strings_cfg,
- },
};
const struct wled_u32_opts wled4_opts[] = {
@@ -1372,11 +1352,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled4_num_strings_cfg,
- },
};
const struct wled_u32_opts wled5_opts[] = {
@@ -1400,11 +1375,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled4_num_strings_cfg,
- },
{
.name = "qcom,modulator-sel",
.val_ptr = &cfg->mod_sel,
@@ -1523,8 +1493,6 @@ static int wled_configure(struct wled *wled)
*bool_opts[i].val_ptr = true;
}
- cfg->num_strings = cfg->num_strings + 1;
-
string_len = of_property_count_elems_of_size(dev->of_node,
"qcom,enabled-strings",
sizeof(u32));
@@ -1555,6 +1523,22 @@ static int wled_configure(struct wled *wled)
}
}
+ rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val);
+ if (!rc) {
+ if (val < 1 || val > wled->max_string_count) {
+ dev_err(dev, "qcom,num-strings must be between 1 and %d\n",
+ wled->max_string_count);
+ return -EINVAL;
+ }
+
+ if (string_len > 0 && val > string_len) {
+ dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n");
+ return -EINVAL;
+ }
+
+ cfg->num_strings = val;
+ }
+
return 0;
}
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 0407c49ebe330333478440157c640fffd986f41b ]
In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a
new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of mxb_probe(dev). There is a dereference of dev->vv_data
in saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_MXB=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 03b1930efd3c ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7146/mxb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c
index 73fc901ecf3db..bf0b9b0914cd5 100644
--- a/drivers/media/pci/saa7146/mxb.c
+++ b/drivers/media/pci/saa7146/mxb.c
@@ -683,10 +683,16 @@ static struct saa7146_ext_vv vv_data;
static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
struct mxb *mxb;
+ int ret;
DEB_EE("dev:%p\n", dev);
- saa7146_vv_init(dev, &vv_data);
+ ret = saa7146_vv_init(dev, &vv_data);
+ if (ret) {
+ ERR("Error in saa7146_vv_init()");
+ return ret;
+ }
+
if (mxb_probe(dev)) {
saa7146_vv_release(dev);
return -1;
--
2.34.1
From: Reiji Watanabe <[email protected]>
[ Upstream commit 685e2564daa1493053fcd7f1dbed38b35ee2f3cb ]
Currently, mte_set_mem_tag_range() and mte_zero_clear_page_tags() use
DC {GVA,GZVA} unconditionally. But, they should make sure that
DCZID_EL0.DZP, which indicates whether or not use of those instructions
is prohibited, is zero when using those instructions.
Use ST{G,ZG,Z2G} instead when DCZID_EL0.DZP == 1.
Fixes: 013bb59dbb7c ("arm64: mte: handle tags zeroing at page allocation time")
Fixes: 3d0cca0b02ac ("kasan: speed up mte_set_mem_tag_range")
Signed-off-by: Reiji Watanabe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/mte-kasan.h | 8 +++++---
arch/arm64/lib/mte.S | 8 +++++++-
2 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/include/asm/mte-kasan.h b/arch/arm64/include/asm/mte-kasan.h
index 22420e1f8c037..26e013e540ae2 100644
--- a/arch/arm64/include/asm/mte-kasan.h
+++ b/arch/arm64/include/asm/mte-kasan.h
@@ -84,10 +84,12 @@ static inline void __dc_gzva(u64 p)
static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag,
bool init)
{
- u64 curr, mask, dczid_bs, end1, end2, end3;
+ u64 curr, mask, dczid, dczid_bs, dczid_dzp, end1, end2, end3;
/* Read DC G(Z)VA block size from the system register. */
- dczid_bs = 4ul << (read_cpuid(DCZID_EL0) & 0xf);
+ dczid = read_cpuid(DCZID_EL0);
+ dczid_bs = 4ul << (dczid & 0xf);
+ dczid_dzp = (dczid >> 4) & 1;
curr = (u64)__tag_set(addr, tag);
mask = dczid_bs - 1;
@@ -106,7 +108,7 @@ static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag,
*/
#define SET_MEMTAG_RANGE(stg_post, dc_gva) \
do { \
- if (size >= 2 * dczid_bs) { \
+ if (!dczid_dzp && size >= 2 * dczid_bs) {\
do { \
curr = stg_post(curr); \
} while (curr < end1); \
diff --git a/arch/arm64/lib/mte.S b/arch/arm64/lib/mte.S
index e83643b3995f4..f531dcb95174a 100644
--- a/arch/arm64/lib/mte.S
+++ b/arch/arm64/lib/mte.S
@@ -43,17 +43,23 @@ SYM_FUNC_END(mte_clear_page_tags)
* x0 - address to the beginning of the page
*/
SYM_FUNC_START(mte_zero_clear_page_tags)
+ and x0, x0, #(1 << MTE_TAG_SHIFT) - 1 // clear the tag
mrs x1, dczid_el0
+ tbnz x1, #4, 2f // Branch if DC GZVA is prohibited
and w1, w1, #0xf
mov x2, #4
lsl x1, x2, x1
- and x0, x0, #(1 << MTE_TAG_SHIFT) - 1 // clear the tag
1: dc gzva, x0
add x0, x0, x1
tst x0, #(PAGE_SIZE - 1)
b.ne 1b
ret
+
+2: stz2g x0, [x0], #(MTE_GRANULE_SIZE * 2)
+ tst x0, #(PAGE_SIZE - 1)
+ b.ne 2b
+ ret
SYM_FUNC_END(mte_zero_clear_page_tags)
/*
--
2.34.1
From: Mark Chen <[email protected]>
[ Upstream commit 00c0ee9850b7b0cb7c40b8daba806ae2245e59d4 ]
For Mediatek chipset, it can not enabled if there are something wrong
in btmtk_setup_firmware_79xx(). Thus, the process must be terminated
and returned error code.
Fixes: fc342c4dc4087 ("Bluetooth: btusb: Add protocol support for MediaTek MT7921U USB devices")
Co-developed-by: Sean Wang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Mark Chen <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index fa44828562d32..c99e1e994cd41 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2856,6 +2856,10 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
"mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
dev_id & 0xffff, (fw_version & 0xff) + 1);
err = btusb_mtk_setup_firmware_79xx(hdev, fw_bin_name);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
+ return err;
+ }
/* It's Device EndPoint Reset Option Register */
btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
--
2.34.1
From: Robert Schlabbach <[email protected]>
[ Upstream commit a6441ea29cb2c9314654e093a1cd8020b9b851c8 ]
Commit e955f959ac52 ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:
[ 312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 312.264334] si2157 16-0060: firmware version: 3.0.5
[ 342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 342.295743] si2157 16-0060: firmware version: 3.0.5
[ 372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 372.385035] si2157 16-0060: firmware version: 3.0.5
Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.
Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.
Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03
Fixes: e955f959ac52 ("media: si2157: Better check for running tuner in init")
Reported-by: Robert Schlabbach <[email protected]>
Signed-off-by: Robert Schlabbach <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/tuners/si2157.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index fefb2625f6558..75ddf7ed1faff 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -90,7 +90,7 @@ static int si2157_init(struct dvb_frontend *fe)
dev_dbg(&client->dev, "\n");
/* Try to get Xtal trim property, to verify tuner still running */
- memcpy(cmd.args, "\x15\x00\x04\x02", 4);
+ memcpy(cmd.args, "\x15\x00\x02\x04", 4);
cmd.wlen = 4;
cmd.rlen = 4;
ret = si2157_cmd_execute(client, &cmd);
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit c05b21ebc5bce3ecc78c2c71afd76d92c790a2ac ]
The strings passed in DT may possibly cause out-of-bounds register
accesses and should be validated before use.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index d094299c2a485..8a42ed89c59c9 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1528,12 +1528,28 @@ static int wled_configure(struct wled *wled)
string_len = of_property_count_elems_of_size(dev->of_node,
"qcom,enabled-strings",
sizeof(u32));
- if (string_len > 0)
+ if (string_len > 0) {
+ if (string_len > wled->max_string_count) {
+ dev_err(dev, "Cannot have more than %d strings\n",
+ wled->max_string_count);
+ return -EINVAL;
+ }
+
of_property_read_u32_array(dev->of_node,
"qcom,enabled-strings",
wled->cfg.enabled_strings,
sizeof(u32));
+ for (i = 0; i < string_len; ++i) {
+ if (wled->cfg.enabled_strings[i] >= wled->max_string_count) {
+ dev_err(dev,
+ "qcom,enabled-strings index %d at %d is out of bounds\n",
+ wled->cfg.enabled_strings[i], i);
+ return -EINVAL;
+ }
+ }
+ }
+
return 0;
}
--
2.34.1
From: Dafna Hirschfeld <[email protected]>
[ Upstream commit 9f89c881bffbdffe4060ffaef3489a2830a6dd9c ]
The func v4l2_m2m_ctx_release waits for currently running jobs
to finish and then stop streaming both queues and frees the buffers.
All this should be done before the call to mtk_vcodec_enc_release
which frees the encoder handler. This fixes null-pointer dereference bug:
[ 638.028076] Mem abort info:
[ 638.030932] ESR = 0x96000004
[ 638.033978] EC = 0x25: DABT (current EL), IL = 32 bits
[ 638.039293] SET = 0, FnV = 0
[ 638.042338] EA = 0, S1PTW = 0
[ 638.045474] FSC = 0x04: level 0 translation fault
[ 638.050349] Data abort info:
[ 638.053224] ISV = 0, ISS = 0x00000004
[ 638.057055] CM = 0, WnR = 0
[ 638.060018] user pgtable: 4k pages, 48-bit VAs, pgdp=000000012b6db000
[ 638.066485] [00000000000001a0] pgd=0000000000000000, p4d=0000000000000000
[ 638.073277] Internal error: Oops: 96000004 [#1] SMP
[ 638.078145] Modules linked in: rfkill mtk_vcodec_dec mtk_vcodec_enc uvcvideo mtk_mdp mtk_vcodec_common videobuf2_dma_contig v4l2_h264 cdc_ether v4l2_mem2mem videobuf2_vmalloc usbnet videobuf2_memops videobuf2_v4l2 r8152 videobuf2_common videodev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf elan_i2c elants_i2c sbs_battery mc cros_usbpd_charger cros_ec_chardev cros_usbpd_logger crct10dif_ce mtk_vpu fuse ip_tables x_tables ipv6
[ 638.118583] CPU: 0 PID: 212 Comm: kworker/u8:5 Not tainted 5.15.0-06427-g58a1d4dcfc74-dirty #109
[ 638.127357] Hardware name: Google Elm (DT)
[ 638.131444] Workqueue: mtk-vcodec-enc mtk_venc_worker [mtk_vcodec_enc]
[ 638.137974] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 638.144925] pc : vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[ 638.150493] lr : venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[ 638.156060] sp : ffff8000124d3c40
[ 638.159364] x29: ffff8000124d3c40 x28: 0000000000000000 x27: 0000000000000000
[ 638.166493] x26: 0000000000000000 x25: ffff0000e7f252d0 x24: ffff8000124d3d58
[ 638.173621] x23: ffff8000124d3d58 x22: ffff8000124d3d60 x21: 0000000000000001
[ 638.180750] x20: ffff80001137e000 x19: 0000000000000000 x18: 0000000000000001
[ 638.187878] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000000
[ 638.195006] x14: ffff8000118536c0 x13: ffff8000ee1da000 x12: 0000000030d4d91d
[ 638.202134] x11: 0000000000000000 x10: 0000000000000980 x9 : ffff8000124d3b20
[ 638.209262] x8 : ffff0000c18d4ea0 x7 : ffff0000c18d44c0 x6 : ffff0000c18d44c0
[ 638.216391] x5 : ffff80000904a3b0 x4 : ffff8000124d3d58 x3 : ffff8000124d3d60
[ 638.223519] x2 : ffff8000124d3d78 x1 : 0000000000000001 x0 : ffff80001137efb8
[ 638.230648] Call trace:
[ 638.233084] vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[ 638.238304] venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[ 638.243525] mtk_venc_worker+0x110/0x250 [mtk_vcodec_enc]
[ 638.248918] process_one_work+0x1f8/0x498
[ 638.252923] worker_thread+0x140/0x538
[ 638.256664] kthread+0x148/0x158
[ 638.259884] ret_from_fork+0x10/0x20
[ 638.263455] Code: f90023f9 2a0103f5 aa0303f6 aa0403f8 (f940d277)
[ 638.269538] ---[ end trace e374fc10f8e181f5 ]---
[gst-master] root@debian:~/gst-build# [ 638.019193] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a0
Fixes: 4e855a6efa547 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Dafna Hirschfeld <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
index 45d1870c83dd7..4ced20ca647b1 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
@@ -218,11 +218,11 @@ static int fops_vcodec_release(struct file *file)
mtk_v4l2_debug(1, "[%d] encoder", ctx->id);
mutex_lock(&dev->dev_mutex);
+ v4l2_m2m_ctx_release(ctx->m2m_ctx);
mtk_vcodec_enc_release(ctx);
v4l2_fh_del(&ctx->fh);
v4l2_fh_exit(&ctx->fh);
v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
- v4l2_m2m_ctx_release(ctx->m2m_ctx);
list_del_init(&ctx->list);
kfree(ctx);
--
2.34.1
From: Vincent Donnefort <[email protected]>
[ Upstream commit 014ba44e8184e1acf93e0cbb7089ee847802f8f0 ]
select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread where the selected CPU is the previous one. For asymmetric CPU
capacity systems, the assumption was that the wakee couldn't have a
bigger utilization during task placement than it used to have during the
last activation. That was not considering uclamp.min which can completely
change between two task activations and as a consequence mandates the
fitness criterion asym_fits_capacity(), even for the exit path described
above.
Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Vincent Donnefort <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index c6cb8832796b5..d41f966f5866a 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6431,7 +6431,8 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
if (is_per_cpu_kthread(current) &&
in_task() &&
prev == smp_processor_id() &&
- this_rq()->nr_running <= 1) {
+ this_rq()->nr_running <= 1 &&
+ asym_fits_capacity(task_util, prev)) {
return prev;
}
--
2.34.1
From: Lizhi Hou <[email protected]>
[ Upstream commit 3672fb65155530b5eea6225685c75329b6debec3 ]
The base address of uartlite registers could be 64 bit address which is from
device resource. When ulite_probe() calls ulite_assign(), this 64 bit
address is casted to 32-bit. The fix is to replace "u32" type with
"phys_addr_t" type for the base address in ulite_assign() argument list.
Fixes: 8fa7b6100693 ("[POWERPC] Uartlite: Separate the bus binding from the driver proper")
Signed-off-by: Lizhi Hou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/uartlite.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index dfc1ba4e15724..36871cebd6a0f 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -612,7 +612,7 @@ static struct uart_driver ulite_uart_driver = {
*
* Returns: 0 on success, <0 otherwise
*/
-static int ulite_assign(struct device *dev, int id, u32 base, int irq,
+static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq,
struct uartlite_data *pdata)
{
struct uart_port *port;
--
2.34.1
From: Maxim Mikityanskiy <[email protected]>
[ Upstream commit da54ab14953c38d98cb3e34c564c06c3739394b2 ]
The test for bpf_iter_task_vma assumes that the output will be longer
than 1 kB, as the comment above the loop says. Due to this assumption,
the loop becomes infinite if the output turns to be shorter than 1 kB.
The return value of read_fd_into_buffer is 0 when the end of file was
reached, and len isn't being increased any more.
This commit adds a break on EOF to handle short output correctly. For
the reference, this is the contents that I get when running test_progs
under vmtest.sh, and it's shorter than 1 kB:
00400000-00401000 r--p 00000000 fe:00 25867 /root/bpf/test_progs
00401000-00674000 r-xp 00001000 fe:00 25867 /root/bpf/test_progs
00674000-0095f000 r--p 00274000 fe:00 25867 /root/bpf/test_progs
0095f000-00983000 r--p 0055e000 fe:00 25867 /root/bpf/test_progs
00983000-00a8a000 rw-p 00582000 fe:00 25867 /root/bpf/test_progs
00a8a000-0484e000 rw-p 00000000 00:00 0
7f6c64000000-7f6c64021000 rw-p 00000000 00:00 0
7f6c64021000-7f6c68000000 ---p 00000000 00:00 0
7f6c6ac8f000-7f6c6ac90000 r--s 00000000 00:0d 8032
anon_inode:bpf-map
7f6c6ac90000-7f6c6ac91000 ---p 00000000 00:00 0
7f6c6ac91000-7f6c6b491000 rw-p 00000000 00:00 0
7f6c6b491000-7f6c6b492000 r--s 00000000 00:0d 8032
anon_inode:bpf-map
7f6c6b492000-7f6c6b493000 rw-s 00000000 00:0d 8032
anon_inode:bpf-map
7ffc1e23d000-7ffc1e25e000 rw-p 00000000 00:00 0
7ffc1e3b8000-7ffc1e3bc000 r--p 00000000 00:00 0
7ffc1e3bc000-7ffc1e3bd000 r-xp 00000000 00:00 0
7fffffffe000-7ffffffff000 --xp 00000000 00:00 0
Fixes: e8168840e16c ("selftests/bpf: Add test for bpf_iter_task_vma")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/bpf_iter.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_iter.c b/tools/testing/selftests/bpf/prog_tests/bpf_iter.c
index 77ac24b191d4c..dc18e5ae0febc 100644
--- a/tools/testing/selftests/bpf/prog_tests/bpf_iter.c
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_iter.c
@@ -1208,13 +1208,14 @@ static void test_task_vma(void)
goto out;
/* Read CMP_BUFFER_SIZE (1kB) from bpf_iter. Read in small chunks
- * to trigger seq_file corner cases. The expected output is much
- * longer than 1kB, so the while loop will terminate.
+ * to trigger seq_file corner cases.
*/
len = 0;
while (len < CMP_BUFFER_SIZE) {
err = read_fd_into_buffer(iter_fd, task_vma_output + len,
min(read_size, CMP_BUFFER_SIZE - len));
+ if (!err)
+ break;
if (CHECK(err < 0, "read_iter_fd", "read_iter_fd failed\n"))
goto out;
len += err;
--
2.34.1
From: David Matlack <[email protected]>
commit 7c8a4742c4abe205ec9daf416c9d42fd6b406e8e upstream.
When the TDP MMU is write-protection GFNs for page table protection (as
opposed to for dirty logging, or due to the HVA not being writable), it
checks if the SPTE is already write-protected and if so skips modifying
the SPTE and the TLB flush.
This behavior is incorrect because it fails to check if the SPTE
is write-protected for page table protection, i.e. fails to check
that MMU-writable is '0'. If the SPTE was write-protected for dirty
logging but not page table protection, the SPTE could locklessly be made
writable, and vCPUs could still be running with writable mappings cached
in their TLB.
Fix this by only skipping setting the SPTE if the SPTE is already
write-protected *and* MMU-writable is already clear. Technically,
checking only MMU-writable would suffice; a SPTE cannot be writable
without MMU-writable being set. But check both to be paranoid and
because it arguably yields more readable code.
Fixes: 46044f72c382 ("kvm: x86/mmu: Support write protection for nesting in tdp MMU")
Cc: [email protected]
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/tdp_mmu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -1493,12 +1493,12 @@ static bool write_protect_gfn(struct kvm
!is_last_spte(iter.old_spte, iter.level))
continue;
- if (!is_writable_pte(iter.old_spte))
- break;
-
new_spte = iter.old_spte &
~(PT_WRITABLE_MASK | shadow_mmu_writable_mask);
+ if (new_spte == iter.old_spte)
+ break;
+
tdp_mmu_set_spte(kvm, &iter, new_spte);
spte_set = true;
}
From: Christian Lamparter <[email protected]>
[ Upstream commit 4754eab7e5a78bdefe7a960c5c260c95ebbb5fa6 ]
Steven Maddox reported in the OpenWrt bugzilla, that his
RaidSonic IB-NAS4220-B was no longer booting with the new
OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was
working with the previous OpenWrt 19.07 series (uses 4.14).
|[ 5.548038] No RedBoot partition table detected in 30000000.flash
|[ 5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0
|[ 5.739093] No RedBoot partition table detected in 30000000.flash
|...
|[ 7.039504] Waiting for root device /dev/mtdblock3...
The provided bootlog shows that the RedBoot partition parser was
looking for the partition table "at offset 0x0". Which is strange
since the comment in the device-tree says it should be at 0xfe0000.
Further digging on the internet led to a review site that took
some useful PCB pictures of their review unit back in February 2009.
Their picture shows a Spansion S29GL128N11TFI01 flash chip.
>From Spansion's Datasheet:
"S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors"
Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his
unit: "131072".
With the 128 KiB Sector/Erasesize in mind. This patch changes the
fis-index-block property to (0xfe0000 / 0x20000) = 0x7f.
Fixes: b5a923f8c739 ("ARM: dts: gemini: Switch to redboot partition parsing")
Reported-by: Steven Maddox <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Tested-by: Steven Maddox <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/gemini-nas4220b.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 13112a8a5dd88..6544c730340fa 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -84,7 +84,7 @@
partitions {
compatible = "redboot-fis";
/* Eraseblock at 0xfe0000 */
- fis-index-block = <0x1fc>;
+ fis-index-block = <0x7f>;
};
};
--
2.34.1
From: Antony Antony <[email protected]>
[ Upstream commit 8dce43919566f06e865f7e8949f5c10d8c2493f5 ]
xfrm interface if_id = 0 would cause xfrm policy lookup errors since
Commit 9f8550e4bd9d.
Now explicitly fail to create an xfrm interface when if_id = 0
With this commit:
ip link add ipsec0 type xfrm dev lo if_id 0
Error: if_id must be non zero.
v1->v2 change:
- add Fixes: tag
Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <[email protected]>
Reviewed-by: Eyal Birger <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_interface.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 41de46b5ffa94..57448fc519fcd 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -637,11 +637,16 @@ static int xfrmi_newlink(struct net *src_net, struct net_device *dev,
struct netlink_ext_ack *extack)
{
struct net *net = dev_net(dev);
- struct xfrm_if_parms p;
+ struct xfrm_if_parms p = {};
struct xfrm_if *xi;
int err;
xfrmi_netlink_parms(data, &p);
+ if (!p.if_id) {
+ NL_SET_ERR_MSG(extack, "if_id must be non zero");
+ return -EINVAL;
+ }
+
xi = xfrmi_locate(net, &p);
if (xi)
return -EEXIST;
@@ -666,7 +671,12 @@ static int xfrmi_changelink(struct net_device *dev, struct nlattr *tb[],
{
struct xfrm_if *xi = netdev_priv(dev);
struct net *net = xi->net;
- struct xfrm_if_parms p;
+ struct xfrm_if_parms p = {};
+
+ if (!p.if_id) {
+ NL_SET_ERR_MSG(extack, "if_id must be non zero");
+ return -EINVAL;
+ }
xfrmi_netlink_parms(data, &p);
xi = xfrmi_locate(net, &p);
--
2.34.1
From: Raed Salem <[email protected]>
[ Upstream commit 45a98ef4922def8c679ca7c454403d1957fe70e7 ]
The inner_ipproto saves the inner IP protocol of the plain
text packet. This allows vendor's IPsec feature making offload
decision at skb's features_check and configuring hardware at
ndo_start_xmit, current code implenetation did not handle the
case where IPsec is used in tunnel mode.
Fix by handling the case when IPsec is used in tunnel mode by
reading the protocol of the plain text packet IP protocol.
Fixes: fa4535238fb5 ("net/xfrm: Add inner_ipproto into sec_path")
Signed-off-by: Raed Salem <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_output.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 229544bc70c21..4dc4a7bbe51cf 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -647,10 +647,12 @@ static int xfrm_output_gso(struct net *net, struct sock *sk, struct sk_buff *skb
* This requires hardware to know the inner packet type to calculate
* the inner header checksum. Save inner ip protocol here to avoid
* traversing the packet in the vendor's xmit code.
- * If the encap type is IPIP, just save skb->inner_ipproto. Otherwise,
- * get the ip protocol from the IP header.
+ * For IPsec tunnel mode save the ip protocol from the IP header of the
+ * plain text packet. Otherwise If the encap type is IPIP, just save
+ * skb->inner_ipproto in any other case get the ip protocol from the IP
+ * header.
*/
-static void xfrm_get_inner_ipproto(struct sk_buff *skb)
+static void xfrm_get_inner_ipproto(struct sk_buff *skb, struct xfrm_state *x)
{
struct xfrm_offload *xo = xfrm_offload(skb);
const struct ethhdr *eth;
@@ -658,6 +660,25 @@ static void xfrm_get_inner_ipproto(struct sk_buff *skb)
if (!xo)
return;
+ if (x->outer_mode.encap == XFRM_MODE_TUNNEL) {
+ switch (x->outer_mode.family) {
+ case AF_INET:
+ xo->inner_ipproto = ip_hdr(skb)->protocol;
+ break;
+ case AF_INET6:
+ xo->inner_ipproto = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ break;
+ }
+
+ return;
+ }
+
+ /* non-Tunnel Mode */
+ if (!skb->encapsulation)
+ return;
+
if (skb->inner_protocol_type == ENCAP_TYPE_IPPROTO) {
xo->inner_ipproto = skb->inner_ipproto;
return;
@@ -712,8 +733,7 @@ int xfrm_output(struct sock *sk, struct sk_buff *skb)
sp->xvec[sp->len++] = x;
xfrm_state_hold(x);
- if (skb->encapsulation)
- xfrm_get_inner_ipproto(skb);
+ xfrm_get_inner_ipproto(skb, x);
skb->encapsulation = 1;
if (skb_is_gso(skb)) {
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit e29e24bdabfeddbf8b1a4ecac1af439a85150438 ]
of_property_read_u32_array takes the number of elements to read as last
argument. This does not always need to be 4 (sizeof(u32)) but should
instead be the size of the array in DT as read just above with
of_property_count_elems_of_size.
To not make such an error go unnoticed again the driver now bails
accordingly when of_property_read_u32_array returns an error.
Surprisingly the indentation of newlined arguments is lining up again
after prepending `rc = `.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 8a42ed89c59c9..d413b913fef32 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1535,10 +1535,15 @@ static int wled_configure(struct wled *wled)
return -EINVAL;
}
- of_property_read_u32_array(dev->of_node,
+ rc = of_property_read_u32_array(dev->of_node,
"qcom,enabled-strings",
wled->cfg.enabled_strings,
- sizeof(u32));
+ string_len);
+ if (rc) {
+ dev_err(dev, "Failed to read %d elements from qcom,enabled-strings: %d\n",
+ string_len, rc);
+ return rc;
+ }
for (i = 0; i < string_len; ++i) {
if (wled->cfg.enabled_strings[i] >= wled->max_string_count) {
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 1c1348bf056dee665760a3bd1cd30b0be7554fc2 ]
The return value of platform_get_resource() needs to be checked.
To avoid use of error pointer in case that there is no suitable
resource.
Fixes: d28c74c10751 ("power: reset: add driver for mt6323 poweroff")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/reset/mt6323-poweroff.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
index 0532803e6cbc4..d90e76fcb9383 100644
--- a/drivers/power/reset/mt6323-poweroff.c
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -57,6 +57,9 @@ static int mt6323_pwrc_probe(struct platform_device *pdev)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
pwrc->base = res->start;
pwrc->regmap = mt6397_chip->regmap;
pwrc->dev = &pdev->dev;
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit f31b0e24d31e18b4503eeaf0032baeacc0beaff6 ]
Make safe_status debugfs fs file actually return safe status rather than
danger status data.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index ad247c06e198f..93d916858d5ad 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -73,8 +73,8 @@ static int _dpu_danger_signal_status(struct seq_file *s,
&status);
} else {
seq_puts(s, "\nSafe signal status:\n");
- if (kms->hw_mdp->ops.get_danger_status)
- kms->hw_mdp->ops.get_danger_status(kms->hw_mdp,
+ if (kms->hw_mdp->ops.get_safe_status)
+ kms->hw_mdp->ops.get_safe_status(kms->hw_mdp,
&status);
}
pm_runtime_put_sync(&kms->pdev->dev);
--
2.34.1
From: Andre Przywara <[email protected]>
[ Upstream commit a92882a4d270fbcc021ee6848de5e48b7f0d27f3 ]
In the decompressor's head.S we need to start with an instruction that
is some kind of NOP, but also mimics as the PE/COFF header, when the
kernel is linked as an UEFI application. The clever solution here is
"tstne r0, #0x4d000", which in the worst case just clobbers the
condition flags, and bears the magic "MZ" signature in the lowest 16 bits.
However the encoding used (0x13105a4d) is actually not valid, since bits
[15:12] are supposed to be 0 (written as "(0)" in the ARM ARM).
Violating this is UNPREDICTABLE, and *can* trigger an UNDEFINED
exception. Common Cortex cores seem to ignore those bits, but QEMU
chooses to trap, so the code goes fishing because of a missing exception
handler at this point. We are just saved by the fact that commonly (with
-kernel or when running from U-Boot) the "Z" bit is set, so the
instruction is never executed. See [0] for more details.
To make things more robust and avoid UNPREDICTABLE behaviour in the
kernel code, lets replace this with a "two-instruction NOP":
The first instruction is an exclusive OR, the effect of which the second
instruction reverts. This does not leave any trace, neither in a
register nor in the condition flags. Also it's a perfectly valid
encoding. Kudos to Peter Maydell for coming up with this gem.
[0] https://lore.kernel.org/qemu-devel/YTPIdbUCmwagL5%[email protected]/T/
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/
Fixes: 81a0bc39ea19 ("ARM: add UEFI stub support")
Signed-off-by: Andre Przywara <[email protected]>
Reported-by: Adam Lackorzynski <[email protected]>
Suggested-by: Peter Maydell <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/compressed/efi-header.S | 22 ++++++++++++++--------
arch/arm/boot/compressed/head.S | 3 ++-
2 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e2..230030c130853 100644
--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
#include <linux/sizes.h>
.macro __nop
-#ifdef CONFIG_EFI_STUB
- @ This is almost but not quite a NOP, since it does clobber the
- @ condition flags. But it is the best we can do for EFI, since
- @ PE/COFF expects the magic string "MZ" at offset 0, while the
- @ ARM/Linux boot protocol expects an executable instruction
- @ there.
- .inst MZ_MAGIC | (0x1310 << 16) @ tstne r0, #0x4d000
-#else
AR_CLASS( mov r0, r0 )
M_CLASS( nop.w )
+ .endm
+
+ .macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+ @ This is a two-instruction NOP, which happens to bear the
+ @ PE/COFF signature "MZ" in the first two bytes, so the kernel
+ @ is accepted as an EFI binary. Booting via the UEFI stub
+ @ will not execute those instructions, but the ARM/Linux
+ @ boot protocol does, so we need some NOPs here.
+ .inst MZ_MAGIC | (0xe225 << 16) @ eor r5, r5, 0x4d000
+ eor r5, r5, 0x4d000 @ undo previous insn
+#else
+ __nop
+ __nop
#endif
.endm
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b1cb1972361b8..bf79f2f78d232 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -203,7 +203,8 @@ start:
* were patching the initial instructions of the kernel, i.e
* had started to exploit this "patch area".
*/
- .rept 7
+ __initial_nops
+ .rept 5
__nop
.endr
#ifndef CONFIG_THUMB2_KERNEL
--
2.34.1
From: Vladimir Oltean <[email protected]>
[ Upstream commit ff91e1b68490b97c18c649b769618815eb945f11 ]
The cross-chip notifier boilerplate code meant to check the presence of
ds->ops->port_mrp_add_ring_role before calling it, but checked
ds->ops->port_mrp_add instead, before calling
ds->ops->port_mrp_add_ring_role.
Therefore, a driver which implements one operation but not the other
would trigger a NULL pointer dereference.
There isn't any such driver in DSA yet, so there is no reason to
backport the change. Issue found through code inspection.
Cc: Horatiu Vultur <[email protected]>
Fixes: c595c4330da0 ("net: dsa: add MRP support")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/dsa/switch.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/dsa/switch.c b/net/dsa/switch.c
index 44558fbdc65b3..fb69f2f14234e 100644
--- a/net/dsa/switch.c
+++ b/net/dsa/switch.c
@@ -644,7 +644,7 @@ static int
dsa_switch_mrp_add_ring_role(struct dsa_switch *ds,
struct dsa_notifier_mrp_ring_role_info *info)
{
- if (!ds->ops->port_mrp_add)
+ if (!ds->ops->port_mrp_add_ring_role)
return -EOPNOTSUPP;
if (ds->index == info->sw_index)
@@ -658,7 +658,7 @@ static int
dsa_switch_mrp_del_ring_role(struct dsa_switch *ds,
struct dsa_notifier_mrp_ring_role_info *info)
{
- if (!ds->ops->port_mrp_del)
+ if (!ds->ops->port_mrp_del_ring_role)
return -EOPNOTSUPP;
if (ds->index == info->sw_index)
--
2.34.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 44073187990d5629804ce0627525f6ea5cfef171 ]
It seems pretty clear ppp layer assumed user space
would always be kind to provide enough data
in their write() to a ppp device.
This patch makes sure user provides at least
2 bytes.
It adds PPP_PROTO_LEN macro that could replace
in net-next many occurrences of hard-coded 2 value.
I replaced only one occurrence to ease backports
to stable kernels.
The bug manifests in the following report:
BUG: KMSAN: uninit-value in ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740
ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740
__ppp_xmit_process+0x23e/0x4b0 drivers/net/ppp/ppp_generic.c:1640
ppp_xmit_process+0x1fe/0x480 drivers/net/ppp/ppp_generic.c:1661
ppp_write+0x5cb/0x5e0 drivers/net/ppp/ppp_generic.c:513
do_iter_write+0xb0c/0x1500 fs/read_write.c:853
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
ppp_write+0x11d/0x5e0 drivers/net/ppp/ppp_generic.c:501
do_iter_write+0xb0c/0x1500 fs/read_write.c:853
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: [email protected]
Reported-by: syzbot <[email protected]>
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ppp/ppp_generic.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index fb52cd175b45d..829d6ada1704c 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -69,6 +69,8 @@
#define MPHDRLEN 6 /* multilink protocol header length */
#define MPHDRLEN_SSN 4 /* ditto with short sequence numbers */
+#define PPP_PROTO_LEN 2
+
/*
* An instance of /dev/ppp can be associated with either a ppp
* interface unit or a ppp channel. In both cases, file->private_data
@@ -497,6 +499,9 @@ static ssize_t ppp_write(struct file *file, const char __user *buf,
if (!pf)
return -ENXIO;
+ /* All PPP packets should start with the 2-byte protocol */
+ if (count < PPP_PROTO_LEN)
+ return -EINVAL;
ret = -ENOMEM;
skb = alloc_skb(count + pf->hdrlen, GFP_KERNEL);
if (!skb)
@@ -1764,7 +1769,7 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
}
++ppp->stats64.tx_packets;
- ppp->stats64.tx_bytes += skb->len - 2;
+ ppp->stats64.tx_bytes += skb->len - PPP_PROTO_LEN;
switch (proto) {
case PPP_IP:
--
2.34.1
From: John Fastabend <[email protected]>
[ Upstream commit 218d747a4142f281a256687bb513a135c905867b ]
sock_map_link() is called to update a sockmap entry with a sk. But, if the
sock_map_init_proto() call fails then we return an error to the map_update
op against the sockmap. In the error path though we need to cleanup psock
and dec the refcnt on any programs associated with the map, because we
refcnt them early in the update process to ensure they are pinned for the
psock. (This avoids a race where user deletes programs while also updating
the map with new socks.)
In current code we do the prog refcnt dec explicitely by calling
bpf_prog_put() when the program was found in the map. But, after commit
'38207a5e81230' in this error path we've already done the prog to psock
assignment so the programs have a reference from the psock as well. This
then causes the psock tear down logic, invoked by sk_psock_put() in the
error path, to similarly call bpf_prog_put on the programs there.
To be explicit this logic does the prog->psock assignment:
if (msg_*)
psock_set_prog(...)
Then the error path under the out_progs label does a similar check and
dec with:
if (msg_*)
bpf_prog_put(...)
And the teardown logic sk_psock_put() does ...
psock_set_prog(msg_*, NULL)
... triggering another bpf_prog_put(...). Then KASAN gives us this splat,
found by syzbot because we've created an inbalance between bpf_prog_inc and
bpf_prog_put calling put twice on the program.
BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_put kernel/bpf/syscall.c:1812 [inline]
BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_put kernel/bpf/syscall.c:1812 [inline] kernel/bpf/syscall.c:1829
BUG: KASAN: vmalloc-out-of-bounds in bpf_prog_put+0x8c/0x4f0 kernel/bpf/syscall.c:1829 kernel/bpf/syscall.c:1829
Read of size 8 at addr ffffc90000e76038 by task syz-executor020/3641
To fix clean up error path so it doesn't try to do the bpf_prog_put in the
error path once progs are assigned then it relies on the normal psock
tear down logic to do complete cleanup.
For completness we also cover the case whereh sk_psock_init_strp() fails,
but this is not expected because it indicates an incorrect socket type
and should be caught earlier.
Fixes: 38207a5e8123 ("bpf, sockmap: Attach map progs to psock early for feature probes")
Reported-by: [email protected]
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/sock_map.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/net/core/sock_map.c b/net/core/sock_map.c
index c89f527411e84..8288b5382f08d 100644
--- a/net/core/sock_map.c
+++ b/net/core/sock_map.c
@@ -292,15 +292,23 @@ static int sock_map_link(struct bpf_map *map, struct sock *sk)
if (skb_verdict)
psock_set_prog(&psock->progs.skb_verdict, skb_verdict);
+ /* msg_* and stream_* programs references tracked in psock after this
+ * point. Reference dec and cleanup will occur through psock destructor
+ */
ret = sock_map_init_proto(sk, psock);
- if (ret < 0)
- goto out_drop;
+ if (ret < 0) {
+ sk_psock_put(sk, psock);
+ goto out;
+ }
write_lock_bh(&sk->sk_callback_lock);
if (stream_parser && stream_verdict && !psock->saved_data_ready) {
ret = sk_psock_init_strp(sk, psock);
- if (ret)
- goto out_unlock_drop;
+ if (ret) {
+ write_unlock_bh(&sk->sk_callback_lock);
+ sk_psock_put(sk, psock);
+ goto out;
+ }
sk_psock_start_strp(sk, psock);
} else if (!stream_parser && stream_verdict && !psock->saved_data_ready) {
sk_psock_start_verdict(sk,psock);
@@ -309,10 +317,6 @@ static int sock_map_link(struct bpf_map *map, struct sock *sk)
}
write_unlock_bh(&sk->sk_callback_lock);
return 0;
-out_unlock_drop:
- write_unlock_bh(&sk->sk_callback_lock);
-out_drop:
- sk_psock_put(sk, psock);
out_progs:
if (skb_verdict)
bpf_prog_put(skb_verdict);
@@ -325,6 +329,7 @@ out_put_stream_parser:
out_put_stream_verdict:
if (stream_verdict)
bpf_prog_put(stream_verdict);
+out:
return ret;
}
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 43d012123122cc69feacab55b71369f386c19566 ]
This code is holding the &ofdpa->flow_tbl_lock spinlock so it is not
allowed to sleep. That means we have to pass the OFDPA_OP_FLAG_NOWAIT
flag to ofdpa_flow_tbl_del().
Fixes: 936bd486564a ("rocker: use FIB notifications instead of switchdev calls")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/rocker/rocker_ofdpa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/rocker/rocker_ofdpa.c b/drivers/net/ethernet/rocker/rocker_ofdpa.c
index 3e1ca7a8d0295..bc70c6abd6a5b 100644
--- a/drivers/net/ethernet/rocker/rocker_ofdpa.c
+++ b/drivers/net/ethernet/rocker/rocker_ofdpa.c
@@ -2783,7 +2783,8 @@ static void ofdpa_fib4_abort(struct rocker *rocker)
if (!ofdpa_port)
continue;
nh->fib_nh_flags &= ~RTNH_F_OFFLOAD;
- ofdpa_flow_tbl_del(ofdpa_port, OFDPA_OP_FLAG_REMOVE,
+ ofdpa_flow_tbl_del(ofdpa_port,
+ OFDPA_OP_FLAG_REMOVE | OFDPA_OP_FLAG_NOWAIT,
flow_entry);
}
spin_unlock_irqrestore(&ofdpa->flow_tbl_lock, flags);
--
2.34.1
From: Florian Westphal <[email protected]>
[ Upstream commit 23c54263efd7cb605e2f7af72717a2a951999217 ]
This is needed in case a new transaction is made that doesn't insert any
new elements into an already existing set.
Else, after second 'nft -f ruleset.txt', lookups in such a set will fail
because ->lookup() encounters raw_cpu_ptr(m->scratch) == NULL.
For the initial rule load, insertion of elements takes care of the
allocation, but for rule reloads this isn't guaranteed: we might not
have additions to the set.
Fixes: 3c4287f62044a90e ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: etkaar <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_set_pipapo.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c
index dce866d93feed..2c8051d8cca69 100644
--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -1290,6 +1290,11 @@ static struct nft_pipapo_match *pipapo_clone(struct nft_pipapo_match *old)
if (!new->scratch_aligned)
goto out_scratch;
#endif
+ for_each_possible_cpu(i)
+ *per_cpu_ptr(new->scratch, i) = NULL;
+
+ if (pipapo_realloc_scratch(new, old->bsize_max))
+ goto out_scratch_realloc;
rcu_head_init(&new->rcu);
@@ -1334,6 +1339,9 @@ out_lt:
kvfree(dst->lt);
dst--;
}
+out_scratch_realloc:
+ for_each_possible_cpu(i)
+ kfree(*per_cpu_ptr(new->scratch, i));
#ifdef NFT_PIPAPO_ALIGN
free_percpu(new->scratch_aligned);
#endif
--
2.34.1
From: Panicker Harish <[email protected]>
[ Upstream commit df1e5c51492fd93ffc293acdcc6f00698d19fedc ]
The IBS timers are not stopped properly once BT OFF is triggered.
we could see IBS commands being sent along with version command,
so stopped IBS timers while Bluetooth is off.
Fixes: 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990")
Signed-off-by: Panicker Harish <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_qca.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 53deea2eb7b4d..3c26fc8463923 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1927,6 +1927,9 @@ static int qca_power_off(struct hci_dev *hdev)
hu->hdev->hw_error = NULL;
hu->hdev->cmd_timeout = NULL;
+ del_timer_sync(&qca->wake_retrans_timer);
+ del_timer_sync(&qca->tx_idle_timer);
+
/* Stop sending shutdown command if soc crashes. */
if (soc_type != QCA_ROME
&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
--
2.34.1
From: Aya Levin <[email protected]>
[ Upstream commit 0b7cfa4082fbf550595bc0e40f05614bd83bf0cd ]
Driver initiates DMA sync, hence it may skip CPU sync. Add
DMA_ATTR_SKIP_CPU_SYNC as input attribute both to dma_map_page and
dma_unmap_page to avoid redundant sync with the CPU.
When forcing the device to work with SWIOTLB, the extra sync might cause
data corruption. The driver unmaps the whole page while the hardware
used just a part of the bounce buffer. So syncing overrides the entire
page with bounce buffer that only partially contains real data.
Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c | 4 ++--
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 7 ++++---
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
index 7b562d2c8a196..279cd8f4e79f7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
@@ -11,13 +11,13 @@ static int mlx5e_xsk_map_pool(struct mlx5e_priv *priv,
{
struct device *dev = mlx5_core_dma_dev(priv->mdev);
- return xsk_pool_dma_map(pool, dev, 0);
+ return xsk_pool_dma_map(pool, dev, DMA_ATTR_SKIP_CPU_SYNC);
}
static void mlx5e_xsk_unmap_pool(struct mlx5e_priv *priv,
struct xsk_buff_pool *pool)
{
- return xsk_pool_dma_unmap(pool, 0);
+ return xsk_pool_dma_unmap(pool, DMA_ATTR_SKIP_CPU_SYNC);
}
static int mlx5e_xsk_get_pools(struct mlx5e_xsk *xsk)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index 29a6586ef28dc..0015545d5235b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -271,8 +271,8 @@ static inline int mlx5e_page_alloc_pool(struct mlx5e_rq *rq,
if (unlikely(!dma_info->page))
return -ENOMEM;
- dma_info->addr = dma_map_page(rq->pdev, dma_info->page, 0,
- PAGE_SIZE, rq->buff.map_dir);
+ dma_info->addr = dma_map_page_attrs(rq->pdev, dma_info->page, 0, PAGE_SIZE,
+ rq->buff.map_dir, DMA_ATTR_SKIP_CPU_SYNC);
if (unlikely(dma_mapping_error(rq->pdev, dma_info->addr))) {
page_pool_recycle_direct(rq->page_pool, dma_info->page);
dma_info->page = NULL;
@@ -293,7 +293,8 @@ static inline int mlx5e_page_alloc(struct mlx5e_rq *rq,
void mlx5e_page_dma_unmap(struct mlx5e_rq *rq, struct mlx5e_dma_info *dma_info)
{
- dma_unmap_page(rq->pdev, dma_info->addr, PAGE_SIZE, rq->buff.map_dir);
+ dma_unmap_page_attrs(rq->pdev, dma_info->addr, PAGE_SIZE, rq->buff.map_dir,
+ DMA_ATTR_SKIP_CPU_SYNC);
}
void mlx5e_page_release_dynamic(struct mlx5e_rq *rq,
--
2.34.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 5fe392ff9d1f7254a1fbb3f72d9893088e4d23eb ]
When cross compiling i386_defconfig on an arm64 host with clang, there
are a few instances of '-Waddress-of-packed-member' and
'-Wgnu-variable-sized-type-not-at-end' in arch/x86/boot/compressed/,
which should both be disabled with the cc-disable-warning calls in that
directory's Makefile, which indicates that cc-disable-warning is failing
at the point of testing these flags.
The cc-disable-warning calls fail because at the point that the flags
are tested, KBUILD_CFLAGS has '-march=i386' without $(CLANG_FLAGS),
which has the '--target=' flag to tell clang what architecture it is
targeting. Without the '--target=' flag, the host architecture (arm64)
is used and i386 is not a valid value for '-march=' in that case. This
error can be seen by adding some logging to try-run:
clang-14: error: the clang compiler does not support '-march=i386'
Invoking the compiler has to succeed prior to calling cc-option or
cc-disable-warning in order to accurately test whether or not the flag
is supported; if it doesn't, the requested flag can never be added to
the compiler flags. Move $(CLANG_FLAGS) to the beginning of KBUILD_FLAGS
so that any new flags that might be added in the future can be
accurately tested.
Fixes: d5cbd80e302d ("x86/boot: Add $(CLANG_FLAGS) to compressed KBUILD_CFLAGS")
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/boot/compressed/Makefile | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 431bf7f846c3c..e118136460518 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -28,7 +28,11 @@ KCOV_INSTRUMENT := n
targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4 vmlinux.bin.zst
-KBUILD_CFLAGS := -m$(BITS) -O2
+# CLANG_FLAGS must come before any cc-disable-warning or cc-option calls in
+# case of cross compiling, as it has the '--target=' flag, which is needed to
+# avoid errors with '-march=i386', and future flags may depend on the target to
+# be valid.
+KBUILD_CFLAGS := -m$(BITS) -O2 $(CLANG_FLAGS)
KBUILD_CFLAGS += -fno-strict-aliasing -fPIE
KBUILD_CFLAGS += -Wundef
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
@@ -47,7 +51,6 @@ KBUILD_CFLAGS += -D__DISABLE_EXPORTS
# Disable relocation relaxation in case the link is not PIE.
KBUILD_CFLAGS += $(call as-option,-Wa$(comma)-mrelax-relocations=no)
KBUILD_CFLAGS += -include $(srctree)/include/linux/hidden.h
-KBUILD_CFLAGS += $(CLANG_FLAGS)
# sev.c indirectly inludes inat-table.h which is generated during
# compilation and stored in $(objtree). Add the directory to the includes so
--
2.34.1
From: Paul Blakey <[email protected]>
[ Upstream commit b6dfff21a170af5c695ebaa153b7f5e297ddca03 ]
Tunnel device follows RFC 6040, and during decapsulation inner
ip_ecn might change depending on inner and outer ip_ecn as follows:
+---------+----------------------------------------+
|Arriving | Arriving Outer Header |
| Inner +---------+---------+---------+----------+
| Header | Not-ECT | ECT(0) | ECT(1) | CE |
+---------+---------+---------+---------+----------+
| Not-ECT | Not-ECT | Not-ECT | Not-ECT | <drop> |
| ECT(0) | ECT(0) | ECT(0) | ECT(1) | CE* |
| ECT(1) | ECT(1) | ECT(1) | ECT(1)* | CE* |
| CE | CE | CE | CE | CE |
+---------+---------+---------+---------+----------+
Cells marked above are changed from original inner packet ip_ecn value.
Tc then matches on the modified inner ip_ecn, but hw offload which
matches the inner ip_ecn value before decap, will fail.
Fix that by mapping all the cases of outer and inner ip_ecn matching,
and only supporting cases where we know inner wouldn't be changed by
decap, or in the outer ip_ecn=CE case, inner ip_ecn didn't matter.
Fixes: bcef735c59f2 ("net/mlx5e: Offload TC matching on tos/ttl for ip tunnels")
Signed-off-by: Paul Blakey <[email protected]>
Reviewed-by: Oz Shlomo <[email protected]>
Reviewed-by: Eli Cohen <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/mellanox/mlx5/core/en_tc.c | 120 +++++++++++++++++-
1 file changed, 116 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index fa461bc57baee..8b041deb25e5f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -1874,6 +1874,111 @@ u8 mlx5e_tc_get_ip_version(struct mlx5_flow_spec *spec, bool outer)
return ip_version;
}
+/* Tunnel device follows RFC 6040, see include/net/inet_ecn.h.
+ * And changes inner ip_ecn depending on inner and outer ip_ecn as follows:
+ * +---------+----------------------------------------+
+ * |Arriving | Arriving Outer Header |
+ * | Inner +---------+---------+---------+----------+
+ * | Header | Not-ECT | ECT(0) | ECT(1) | CE |
+ * +---------+---------+---------+---------+----------+
+ * | Not-ECT | Not-ECT | Not-ECT | Not-ECT | <drop> |
+ * | ECT(0) | ECT(0) | ECT(0) | ECT(1) | CE* |
+ * | ECT(1) | ECT(1) | ECT(1) | ECT(1)* | CE* |
+ * | CE | CE | CE | CE | CE |
+ * +---------+---------+---------+---------+----------+
+ *
+ * Tc matches on inner after decapsulation on tunnel device, but hw offload matches
+ * the inner ip_ecn value before hardware decap action.
+ *
+ * Cells marked are changed from original inner packet ip_ecn value during decap, and
+ * so matching those values on inner ip_ecn before decap will fail.
+ *
+ * The following helper allows offload when inner ip_ecn won't be changed by outer ip_ecn,
+ * except for the outer ip_ecn = CE, where in all cases inner ip_ecn will be changed to CE,
+ * and such we can drop the inner ip_ecn=CE match.
+ */
+
+static int mlx5e_tc_verify_tunnel_ecn(struct mlx5e_priv *priv,
+ struct flow_cls_offload *f,
+ bool *match_inner_ecn)
+{
+ u8 outer_ecn_mask = 0, outer_ecn_key = 0, inner_ecn_mask = 0, inner_ecn_key = 0;
+ struct flow_rule *rule = flow_cls_offload_flow_rule(f);
+ struct netlink_ext_ack *extack = f->common.extack;
+ struct flow_match_ip match;
+
+ *match_inner_ecn = true;
+
+ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_IP)) {
+ flow_rule_match_enc_ip(rule, &match);
+ outer_ecn_key = match.key->tos & INET_ECN_MASK;
+ outer_ecn_mask = match.mask->tos & INET_ECN_MASK;
+ }
+
+ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IP)) {
+ flow_rule_match_ip(rule, &match);
+ inner_ecn_key = match.key->tos & INET_ECN_MASK;
+ inner_ecn_mask = match.mask->tos & INET_ECN_MASK;
+ }
+
+ if (outer_ecn_mask != 0 && outer_ecn_mask != INET_ECN_MASK) {
+ NL_SET_ERR_MSG_MOD(extack, "Partial match on enc_tos ecn bits isn't supported");
+ netdev_warn(priv->netdev, "Partial match on enc_tos ecn bits isn't supported");
+ return -EOPNOTSUPP;
+ }
+
+ if (!outer_ecn_mask) {
+ if (!inner_ecn_mask)
+ return 0;
+
+ NL_SET_ERR_MSG_MOD(extack,
+ "Matching on tos ecn bits without also matching enc_tos ecn bits isn't supported");
+ netdev_warn(priv->netdev,
+ "Matching on tos ecn bits without also matching enc_tos ecn bits isn't supported");
+ return -EOPNOTSUPP;
+ }
+
+ if (inner_ecn_mask && inner_ecn_mask != INET_ECN_MASK) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Partial match on tos ecn bits with match on enc_tos ecn bits isn't supported");
+ netdev_warn(priv->netdev,
+ "Partial match on tos ecn bits with match on enc_tos ecn bits isn't supported");
+ return -EOPNOTSUPP;
+ }
+
+ if (!inner_ecn_mask)
+ return 0;
+
+ /* Both inner and outer have full mask on ecn */
+
+ if (outer_ecn_key == INET_ECN_ECT_1) {
+ /* inner ecn might change by DECAP action */
+
+ NL_SET_ERR_MSG_MOD(extack, "Match on enc_tos ecn = ECT(1) isn't supported");
+ netdev_warn(priv->netdev, "Match on enc_tos ecn = ECT(1) isn't supported");
+ return -EOPNOTSUPP;
+ }
+
+ if (outer_ecn_key != INET_ECN_CE)
+ return 0;
+
+ if (inner_ecn_key != INET_ECN_CE) {
+ /* Can't happen in software, as packet ecn will be changed to CE after decap */
+ NL_SET_ERR_MSG_MOD(extack,
+ "Match on tos enc_tos ecn = CE while match on tos ecn != CE isn't supported");
+ netdev_warn(priv->netdev,
+ "Match on tos enc_tos ecn = CE while match on tos ecn != CE isn't supported");
+ return -EOPNOTSUPP;
+ }
+
+ /* outer ecn = CE, inner ecn = CE, as decap will change inner ecn to CE in anycase,
+ * drop match on inner ecn
+ */
+ *match_inner_ecn = false;
+
+ return 0;
+}
+
static int parse_tunnel_attr(struct mlx5e_priv *priv,
struct mlx5e_tc_flow *flow,
struct mlx5_flow_spec *spec,
@@ -2067,6 +2172,7 @@ static int __parse_cls_flower(struct mlx5e_priv *priv,
struct flow_rule *rule = flow_cls_offload_flow_rule(f);
struct flow_dissector *dissector = rule->match.dissector;
enum fs_flow_table_type fs_type;
+ bool match_inner_ecn = true;
u16 addr_type = 0;
u8 ip_proto = 0;
u8 *match_level;
@@ -2120,6 +2226,10 @@ static int __parse_cls_flower(struct mlx5e_priv *priv,
headers_c = get_match_inner_headers_criteria(spec);
headers_v = get_match_inner_headers_value(spec);
}
+
+ err = mlx5e_tc_verify_tunnel_ecn(priv, f, &match_inner_ecn);
+ if (err)
+ return err;
}
err = mlx5e_flower_parse_meta(filter_dev, f);
@@ -2341,10 +2451,12 @@ static int __parse_cls_flower(struct mlx5e_priv *priv,
struct flow_match_ip match;
flow_rule_match_ip(rule, &match);
- MLX5_SET(fte_match_set_lyr_2_4, headers_c, ip_ecn,
- match.mask->tos & 0x3);
- MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ecn,
- match.key->tos & 0x3);
+ if (match_inner_ecn) {
+ MLX5_SET(fte_match_set_lyr_2_4, headers_c, ip_ecn,
+ match.mask->tos & 0x3);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ecn,
+ match.key->tos & 0x3);
+ }
MLX5_SET(fte_match_set_lyr_2_4, headers_c, ip_dscp,
match.mask->tos >> 2);
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit d27bb69dc83f00f86a830298c967052cded6e784 ]
Receiving the Over-Current Protection interrupt while the regulator is
disabled does not count as unhandled/failure (IRQ_NONE, or 0 as it were)
but a "fake event", usually due to inrush as the is regulator about to
be enabled.
Fixes: 390af53e0411 ("regulator: qcom-labibb: Implement short-circuit and over-current IRQs")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/qcom-labibb-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
index b3da0dc58782f..639b71eb41ffe 100644
--- a/drivers/regulator/qcom-labibb-regulator.c
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -260,7 +260,7 @@ static irqreturn_t qcom_labibb_ocp_isr(int irq, void *chip)
/* If the regulator is not enabled, this is a fake event */
if (!ops->is_enabled(vreg->rdev))
- return 0;
+ return IRQ_HANDLED;
/* If we tried to recover for too many times it's not getting better */
if (vreg->ocp_irq_count > LABIBB_MAX_OCP_COUNT)
--
2.34.1
From: Arseny Demidov <[email protected]>
[ Upstream commit a8d6d4992ad9d92356619ac372906bd29687bb46 ]
In the file mr75203.c we have a macro named POWER_DELAY_CYCLE_256,
the correct value should be 0x100. The register ip_tmr is expressed
in units of IP clk cycles, in accordance with the datasheet.
Typical power-up delays for Temperature Sensor are 256 cycles i.e. 0x100.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Arseny Demidov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/mr75203.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 868243dba1ee0..1ba1e31459690 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -93,7 +93,7 @@
#define VM_CH_REQ BIT(21)
#define IP_TMR 0x05
-#define POWER_DELAY_CYCLE_256 0x80
+#define POWER_DELAY_CYCLE_256 0x100
#define POWER_DELAY_CYCLE_64 0x40
#define PVT_POLL_DELAY_US 20
--
2.34.1
From: John Keeping <[email protected]>
[ Upstream commit 92ef98a4caacad6d4a1490dda45d81ae5ccf5bc9 ]
DWC2 may be paired with a full-speed PHY which is not capable of
high-speed operation. Report this correctly to the gadget core by
setting max_speed from the core parameters.
Prior to commit 5324bad66f09f ("usb: dwc2: gadget: implement
udc_set_speed()") this didn't cause the hardware to be configured
incorrectly, although the speed may have been reported incorrectly. But
after that commit params.speed is updated based on a value passed in by
the gadget core which may set it to a faster speed than is supported by
the hardware. Initialising the max_speed parameter ensures the speed
passed to dwc2_gadget_set_speed() will be one supported by the hardware.
Fixes: 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()")
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: John Keeping <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/gadget.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 2190225bf3da2..ea0d2d6139a68 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4974,7 +4974,18 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
hsotg->params.g_np_tx_fifo_size);
dev_dbg(dev, "RXFIFO size: %d\n", hsotg->params.g_rx_fifo_size);
- hsotg->gadget.max_speed = USB_SPEED_HIGH;
+ switch (hsotg->params.speed) {
+ case DWC2_SPEED_PARAM_LOW:
+ hsotg->gadget.max_speed = USB_SPEED_LOW;
+ break;
+ case DWC2_SPEED_PARAM_FULL:
+ hsotg->gadget.max_speed = USB_SPEED_FULL;
+ break;
+ default:
+ hsotg->gadget.max_speed = USB_SPEED_HIGH;
+ break;
+ }
+
hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
hsotg->gadget.name = dev_name(dev);
hsotg->remote_wakeup_allowed = 0;
--
2.34.1
From: Huang Rui <[email protected]>
[ Upstream commit 6c4ab1b86dac3954d15c00c1a6396d60a1023fab ]
The init_freq_invariance_cppc function is implemented in smpboot and depends on
CONFIG_SMP.
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
ld: drivers/acpi/cppc_acpi.o: in function `acpi_cppc_processor_probe':
/home/ray/brahma3/linux/drivers/acpi/cppc_acpi.c:819: undefined reference to `init_freq_invariance_cppc'
make: *** [Makefile:1161: vmlinux] Error 1
See https://lore.kernel.org/lkml/[email protected]/.
Fixes: 41ea667227ba ("x86, sched: Calculate frequency invariance for AMD systems")
Reported-by: kernel test robot <[email protected]>
Reported-by: Randy Dunlap <[email protected]>
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/topology.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 9239399e54914..55160445ea78b 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -218,7 +218,7 @@ static inline void arch_set_max_freq_ratio(bool turbo_disabled)
}
#endif
-#ifdef CONFIG_ACPI_CPPC_LIB
+#if defined(CONFIG_ACPI_CPPC_LIB) && defined(CONFIG_SMP)
void init_freq_invariance_cppc(void);
#define init_freq_invariance_cppc init_freq_invariance_cppc
#endif
--
2.34.1
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit 30d57722732d9736554f85f75f9d7ad5402d192e ]
If user has a set to use SOCK_STREAM the socket would default to
L2CAP_MODE_ERTM which later needs to be adjusted if the destination
address is LE which doesn't support such mode.
Fixes: 15f02b9105625 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 4574c5cb1b596..251017c69ab7f 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -161,7 +161,11 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
break;
}
- if (chan->psm && bdaddr_type_is_le(chan->src_type))
+ /* Use L2CAP_MODE_LE_FLOWCTL (CoC) in case of LE address and
+ * L2CAP_MODE_EXT_FLOWCTL (ECRED) has not been set.
+ */
+ if (chan->psm && bdaddr_type_is_le(chan->src_type) &&
+ chan->mode != L2CAP_MODE_EXT_FLOWCTL)
chan->mode = L2CAP_MODE_LE_FLOWCTL;
chan->state = BT_BOUND;
@@ -255,7 +259,11 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
return -EINVAL;
}
- if (chan->psm && bdaddr_type_is_le(chan->src_type) && !chan->mode)
+ /* Use L2CAP_MODE_LE_FLOWCTL (CoC) in case of LE address and
+ * L2CAP_MODE_EXT_FLOWCTL (ECRED) has not been set.
+ */
+ if (chan->psm && bdaddr_type_is_le(chan->src_type) &&
+ chan->mode != L2CAP_MODE_EXT_FLOWCTL)
chan->mode = L2CAP_MODE_LE_FLOWCTL;
l2cap_sock_init_pid(sk);
--
2.34.1
From: Bernard Zhao <[email protected]>
[ Upstream commit 2e08df3c7c4e4e74e3dd5104c100f0bf6288aaa8 ]
This patch try to fix potential memleak in error branch.
Fixes: ba6418623385 ("selinux: new helper - selinux_add_opt()")
Signed-off-by: Bernard Zhao <[email protected]>
[PM: tweak the subject line, add Fixes tag]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/hooks.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 9309e62d46eda..baa12d1007c7c 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -987,18 +987,22 @@ out:
static int selinux_add_opt(int token, const char *s, void **mnt_opts)
{
struct selinux_mnt_opts *opts = *mnt_opts;
+ bool is_alloc_opts = false;
if (token == Opt_seclabel) /* eaten and completely ignored */
return 0;
+ if (!s)
+ return -ENOMEM;
+
if (!opts) {
opts = kzalloc(sizeof(struct selinux_mnt_opts), GFP_KERNEL);
if (!opts)
return -ENOMEM;
*mnt_opts = opts;
+ is_alloc_opts = true;
}
- if (!s)
- return -ENOMEM;
+
switch (token) {
case Opt_context:
if (opts->context || opts->defcontext)
@@ -1023,6 +1027,10 @@ static int selinux_add_opt(int token, const char *s, void **mnt_opts)
}
return 0;
Einval:
+ if (is_alloc_opts) {
+ kfree(opts);
+ *mnt_opts = NULL;
+ }
pr_warn(SEL_MOUNT_FAIL_MSG);
return -EINVAL;
}
--
2.34.1
From: Thierry Reding <[email protected]>
[ Upstream commit 271fca025a6d43f1c18a48543c5aaf31a31e4694 ]
As of commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling
clocks"), module resets are no longer automatically deasserted when the
module clock is enabled. To make sure that the gr2d module continues to
work, we need to explicitly control the module reset.
Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks")
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/tegra/gr2d.c | 33 +++++++++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tegra/gr2d.c b/drivers/gpu/drm/tegra/gr2d.c
index de288cba39055..ba3722f1b8651 100644
--- a/drivers/gpu/drm/tegra/gr2d.c
+++ b/drivers/gpu/drm/tegra/gr2d.c
@@ -4,9 +4,11 @@
*/
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/reset.h>
#include "drm.h"
#include "gem.h"
@@ -19,6 +21,7 @@ struct gr2d_soc {
struct gr2d {
struct tegra_drm_client client;
struct host1x_channel *channel;
+ struct reset_control *rst;
struct clk *clk;
const struct gr2d_soc *soc;
@@ -208,6 +211,12 @@ static int gr2d_probe(struct platform_device *pdev)
if (!syncpts)
return -ENOMEM;
+ gr2d->rst = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(gr2d->rst)) {
+ dev_err(dev, "cannot get reset\n");
+ return PTR_ERR(gr2d->rst);
+ }
+
gr2d->clk = devm_clk_get(dev, NULL);
if (IS_ERR(gr2d->clk)) {
dev_err(dev, "cannot get clock\n");
@@ -220,6 +229,14 @@ static int gr2d_probe(struct platform_device *pdev)
return err;
}
+ usleep_range(2000, 4000);
+
+ err = reset_control_deassert(gr2d->rst);
+ if (err < 0) {
+ dev_err(dev, "failed to deassert reset: %d\n", err);
+ goto disable_clk;
+ }
+
INIT_LIST_HEAD(&gr2d->client.base.list);
gr2d->client.base.ops = &gr2d_client_ops;
gr2d->client.base.dev = dev;
@@ -234,8 +251,7 @@ static int gr2d_probe(struct platform_device *pdev)
err = host1x_client_register(&gr2d->client.base);
if (err < 0) {
dev_err(dev, "failed to register host1x client: %d\n", err);
- clk_disable_unprepare(gr2d->clk);
- return err;
+ goto assert_rst;
}
/* initialize address register map */
@@ -245,6 +261,13 @@ static int gr2d_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, gr2d);
return 0;
+
+assert_rst:
+ (void)reset_control_assert(gr2d->rst);
+disable_clk:
+ clk_disable_unprepare(gr2d->clk);
+
+ return err;
}
static int gr2d_remove(struct platform_device *pdev)
@@ -259,6 +282,12 @@ static int gr2d_remove(struct platform_device *pdev)
return err;
}
+ err = reset_control_assert(gr2d->rst);
+ if (err < 0)
+ dev_err(&pdev->dev, "failed to assert reset: %d\n", err);
+
+ usleep_range(2000, 4000);
+
clk_disable_unprepare(gr2d->clk);
return 0;
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit f364c571a5c77e96de2d32062ff019d6b8d2e2bc ]
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443831 ("Null pointer dereference")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-uclogic-params.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index adff1bd68d9f8..3c10b858cf74c 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -834,10 +834,10 @@ int uclogic_params_init(struct uclogic_params *params,
struct hid_device *hdev)
{
int rc;
- struct usb_device *udev = hid_to_usb_dev(hdev);
- __u8 bNumInterfaces = udev->config->desc.bNumInterfaces;
- struct usb_interface *iface = to_usb_interface(hdev->dev.parent);
- __u8 bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_device *udev;
+ __u8 bNumInterfaces;
+ struct usb_interface *iface;
+ __u8 bInterfaceNumber;
bool found;
/* The resulting parameters (noop) */
struct uclogic_params p = {0, };
@@ -848,6 +848,11 @@ int uclogic_params_init(struct uclogic_params *params,
goto cleanup;
}
+ udev = hid_to_usb_dev(hdev);
+ bNumInterfaces = udev->config->desc.bNumInterfaces;
+ iface = to_usb_interface(hdev->dev.parent);
+ bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+
/*
* Set replacement report descriptor if the original matches the
* specified size. Otherwise keep interface unchanged.
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 2b4b49602f9feca7b7a84eaa33ad9e666c8aa695 ]
The length of qcom,enabled-strings as property array is enough to
determine the number of strings to be enabled, without needing to set
qcom,num-strings to override the default number of strings when less
than the default (which is also the maximum) is provided in DT.
This also introduces an extra warning when qcom,num-strings is set,
denoting that it is not necessary to set both anymore. It is usually
more concise to set just qcom,num-length when a zero-based, contiguous
range of strings is needed (the majority of the cases), or to only set
qcom,enabled-strings when a specific set of indices is desired.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index dbcbeda655192..c057368e5056e 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1521,6 +1521,8 @@ static int wled_configure(struct wled *wled)
return -EINVAL;
}
}
+
+ cfg->num_strings = string_len;
}
rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val);
@@ -1531,9 +1533,13 @@ static int wled_configure(struct wled *wled)
return -EINVAL;
}
- if (string_len > 0 && val > string_len) {
- dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n");
- return -EINVAL;
+ if (string_len > 0) {
+ dev_warn(dev, "Only one of qcom,num-strings or qcom,enabled-strings"
+ " should be set\n");
+ if (val > string_len) {
+ dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n");
+ return -EINVAL;
+ }
}
cfg->num_strings = val;
--
2.34.1
From: Avraham Stern <[email protected]>
[ Upstream commit 6bb2ea37c02db98cb677f978cfcb833ca608c5eb ]
Don't use protected ranging negotiation for FTM ranging as responders
that support only FTM ranging don't expect the FTM request to be
protected.
Signed-off-by: Avraham Stern <[email protected]>
Fixes: 517a5eb9fab2 ("iwlwifi: mvm: when associated with PMF, use protected NDP ranging negotiation")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.f50ed0e3c6b3.Ibff247ee9d4e6e0a1a2d08a3c8a4bbb37e6829dd@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
index c7fee6a2f7fd4..6e1d37f258035 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
@@ -499,7 +499,7 @@ iwl_mvm_ftm_put_target(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
rcu_read_lock();
sta = rcu_dereference(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id]);
- if (sta->mfp)
+ if (sta->mfp && (peer->ftm.trigger_based || peer->ftm.non_trigger_based))
FTM_PUT_FLAG(PMF);
rcu_read_unlock();
--
2.34.1
From: Fabio Estevam <[email protected]>
[ Upstream commit 530792efa6cb86f5612ff093333fec735793b582 ]
Since commit cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when
calling regmap_attach_dev"), the following debugfs error is seen
on i.MX boards:
debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present!
In the attempt to fix the memory leak, the above commit added a NULL check
for map->debugfs_name. For the first debufs entry, map->debugfs_name is NULL
and then the new name is allocated via kasprintf().
For the second debugfs entry, map->debugfs_name() is no longer NULL, so
it will keep using the old entry name and the duplicate name error is seen.
Quoting Mark Brown:
"That means that if the device gets freed we'll end up with the old debugfs
file hanging around pointing at nothing.
...
To be more explicit this means we need a call to regmap_debugfs_exit()
which will clean up all the existing debugfs stuff before we loose
references to it."
Call regmap_debugfs_exit() prior to regmap_debugfs_init() to fix
the problem.
Tested on i.MX6Q and i.MX6SX boards.
Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Suggested-by: Mark Brown <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/regmap/regmap.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 21a0c2562ec06..f7811641ed5ae 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -647,6 +647,7 @@ int regmap_attach_dev(struct device *dev, struct regmap *map,
if (ret)
return ret;
+ regmap_debugfs_exit(map);
regmap_debugfs_init(map);
/* Add a devres resource for dev_get_regmap() */
--
2.34.1
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 370d988cc529598ebaec6487d4f84c2115dc696b ]
In the function softing_startstop() the variable error_reporting is
assigned but not used. The code that uses this variable is commented
out. Its stated that the functionality is not finally verified.
To fix the warning:
| drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable]
remove the comment, activate the code, but add a "0 &&" to the if
expression and rely on the optimizer rather than the preprocessor to
remove the code.
Link: https://lore.kernel.org/all/[email protected]
Fixes: 03fd3cf5a179 ("can: add driver for Softing card")
Cc: Kurt Van Dijck <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/softing/softing_fw.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c
index 7e15368779931..32286f861a195 100644
--- a/drivers/net/can/softing/softing_fw.c
+++ b/drivers/net/can/softing/softing_fw.c
@@ -565,18 +565,19 @@ int softing_startstop(struct net_device *dev, int up)
if (ret < 0)
goto failed;
}
- /* enable_error_frame */
- /*
+
+ /* enable_error_frame
+ *
* Error reporting is switched off at the moment since
* the receiving of them is not yet 100% verified
* This should be enabled sooner or later
- *
- if (error_reporting) {
+ */
+ if (0 && error_reporting) {
ret = softing_fct_cmd(card, 51, "enable_error_frame");
if (ret < 0)
goto failed;
}
- */
+
/* initialize interface */
iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 2]);
iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 4]);
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ]
Syzbot reported uninit value in mcs7830_bind(). The problem was in
missing validation check for bytes read via usbnet_read_cmd().
usbnet_read_cmd() internally calls usb_control_msg(), that returns
number of bytes read. Code should validate that requested number of bytes
was actually read.
So, this patch adds missing size validation check inside
mcs7830_get_reg() to prevent uninit value bugs
Reported-and-tested-by: [email protected]
Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter")
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/mcs7830.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 66866bef25df7..a31a3b9cbd58d 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -108,8 +108,16 @@ static const char driver_name[] = "MOSCHIP usb-ethernet driver";
static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
{
- return usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
- 0x0000, index, data, size);
+ int ret;
+
+ ret = usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
+ 0x0000, index, data, size);
+ if (ret < 0)
+ return ret;
+ else if (ret < size)
+ return -ENODATA;
+
+ return ret;
}
static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit ff6b548afe4d9d1ff3a0f6ef79e8cbca25d8f905 ]
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443804 ("Null pointer dereference")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-uclogic-params.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 3a83e2c39b4fb..4136837e4d158 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -709,9 +709,9 @@ static int uclogic_params_huion_init(struct uclogic_params *params,
struct hid_device *hdev)
{
int rc;
- struct usb_device *udev = hid_to_usb_dev(hdev);
- struct usb_interface *iface = to_usb_interface(hdev->dev.parent);
- __u8 bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_device *udev;
+ struct usb_interface *iface;
+ __u8 bInterfaceNumber;
bool found;
/* The resulting parameters (noop) */
struct uclogic_params p = {0, };
@@ -725,6 +725,10 @@ static int uclogic_params_huion_init(struct uclogic_params *params,
goto cleanup;
}
+ udev = hid_to_usb_dev(hdev);
+ iface = to_usb_interface(hdev->dev.parent);
+ bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+
/* If it's not a pen interface */
if (bInterfaceNumber != 0) {
/* TODO: Consider marking the interface invalid */
--
2.34.1
From: Paul Blakey <[email protected]>
[ Upstream commit 3849595866166b23bf6a0cb9ff87e06423167f67 ]
If ct rejects a flow, it removes the conntrack info from the skb.
act_ct sets the post_ct variable so the dissector will see this case
as an +tracked +invalid state, but the zone id is lost with the
conntrack info.
To restore the zone id on such cases, set the last executed zone,
via the tc control block, when passing ct, and read it back in the
dissector if there is no ct info on the skb (invalid connection).
Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Paul Blakey <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/skbuff.h | 2 +-
include/net/pkt_sched.h | 1 +
net/core/flow_dissector.c | 3 ++-
net/sched/act_ct.c | 1 +
net/sched/cls_flower.c | 3 ++-
5 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index b8c273af2910c..4f31ca71a82a7 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1370,7 +1370,7 @@ skb_flow_dissect_ct(const struct sk_buff *skb,
struct flow_dissector *flow_dissector,
void *target_container,
u16 *ctinfo_map, size_t mapsize,
- bool post_ct);
+ bool post_ct, u16 zone);
void
skb_flow_dissect_tunnel_info(const struct sk_buff *skb,
struct flow_dissector *flow_dissector,
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 05f18e81f3e87..9e71691c491b7 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -198,6 +198,7 @@ struct tc_skb_cb {
u16 mru;
bool post_ct;
+ u16 zone; /* Only valid if post_ct = true */
};
static inline struct tc_skb_cb *tc_skb_cb(const struct sk_buff *skb)
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index bac0184cf3de7..edffdaa875f1f 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -238,7 +238,7 @@ void
skb_flow_dissect_ct(const struct sk_buff *skb,
struct flow_dissector *flow_dissector,
void *target_container, u16 *ctinfo_map,
- size_t mapsize, bool post_ct)
+ size_t mapsize, bool post_ct, u16 zone)
{
#if IS_ENABLED(CONFIG_NF_CONNTRACK)
struct flow_dissector_key_ct *key;
@@ -260,6 +260,7 @@ skb_flow_dissect_ct(const struct sk_buff *skb,
if (!ct) {
key->ct_state = TCA_FLOWER_KEY_CT_FLAGS_TRACKED |
TCA_FLOWER_KEY_CT_FLAGS_INVALID;
+ key->ct_zone = zone;
return;
}
diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index 98e248b9c0b17..ab3591408419f 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -1049,6 +1049,7 @@ out_push:
skb_push_rcsum(skb, nh_ofs);
tc_skb_cb(skb)->post_ct = true;
+ tc_skb_cb(skb)->zone = p->zone;
out_clear:
if (defrag)
qdisc_skb_cb(skb)->pkt_len = skb->len;
diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c
index 161bd91c8c6b0..709348262410c 100644
--- a/net/sched/cls_flower.c
+++ b/net/sched/cls_flower.c
@@ -311,6 +311,7 @@ static int fl_classify(struct sk_buff *skb, const struct tcf_proto *tp,
{
struct cls_fl_head *head = rcu_dereference_bh(tp->root);
bool post_ct = tc_skb_cb(skb)->post_ct;
+ u16 zone = tc_skb_cb(skb)->zone;
struct fl_flow_key skb_key;
struct fl_flow_mask *mask;
struct cls_fl_filter *f;
@@ -328,7 +329,7 @@ static int fl_classify(struct sk_buff *skb, const struct tcf_proto *tp,
skb_flow_dissect_ct(skb, &mask->dissector, &skb_key,
fl_ct_info_to_flower_map,
ARRAY_SIZE(fl_ct_info_to_flower_map),
- post_ct);
+ post_ct, zone);
skb_flow_dissect_hash(skb, &mask->dissector, &skb_key);
skb_flow_dissect(skb, &mask->dissector, &skb_key, 0);
--
2.34.1
From: Adam Ford <[email protected]>
[ Upstream commit 570727e9acfac1c2330a01dd5e1272e9c3acec08 ]
When attempting to use sys_pll1_80m as the parent for clko1, the
system hangs. This is due to the fact that the source select
for sys_pll1_80m was incorrectly pointing to m7_alt_pll_clk, which
doesn't yet exist.
According to Rev 3 of the TRM, The imx8mn_clko1_sels also incorrectly
references an osc_27m which does not exist, nor does an entry for
source select bits 010b. Fix both by inserting a dummy clock into
the missing space in the table and renaming the incorrectly name clock
with dummy.
Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Adam Ford <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx8mn.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index c55577604e16a..021355a247081 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -277,9 +277,9 @@ static const char * const imx8mn_pdm_sels[] = {"osc_24m", "sys_pll2_100m", "audi
static const char * const imx8mn_dram_core_sels[] = {"dram_pll_out", "dram_alt_root", };
-static const char * const imx8mn_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "osc_27m",
- "sys_pll1_200m", "audio_pll2_out", "vpu_pll",
- "sys_pll1_80m", };
+static const char * const imx8mn_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "dummy",
+ "sys_pll1_200m", "audio_pll2_out", "sys_pll2_500m",
+ "dummy", "sys_pll1_80m", };
static const char * const imx8mn_clko2_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_400m",
"sys_pll2_166m", "sys_pll3_out", "audio_pll1_out",
"video_pll1_out", "osc_32k", };
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit a917dfb66c0a1fa1caacf3d71edcafcab48e6ff0 ]
The 'cmdq->cmdq_bitmap' bitmap is 'rcfw->cmdq_depth' bits long. The size
stored in 'cmdq->bmap_size' is the size of the bitmap in bytes.
Remove this erroneous 'bmap_size' and use 'rcfw->cmdq_depth' directly in
'bnxt_qplib_disable_rcfw_channel()'. Otherwise some error messages may be
missing.
Other uses of 'cmdq_bitmap' already take into account 'rcfw->cmdq_depth'
directly.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/47ed717c3070a1d0f53e7b4c768a4fd11caf365d.1636707421.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 6 ++----
drivers/infiniband/hw/bnxt_re/qplib_rcfw.h | 1 -
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
index 5d384def5e5fe..d2d39126f1852 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
@@ -618,8 +618,6 @@ int bnxt_qplib_alloc_rcfw_channel(struct bnxt_qplib_res *res,
if (!cmdq->cmdq_bitmap)
goto fail;
- cmdq->bmap_size = bmap_size;
-
/* Allocate one extra to hold the QP1 entries */
rcfw->qp_tbl_size = qp_tbl_sz + 1;
rcfw->qp_tbl = kcalloc(rcfw->qp_tbl_size, sizeof(struct bnxt_qplib_qp_node),
@@ -667,8 +665,8 @@ void bnxt_qplib_disable_rcfw_channel(struct bnxt_qplib_rcfw *rcfw)
iounmap(cmdq->cmdq_mbox.reg.bar_reg);
iounmap(creq->creq_db.reg.bar_reg);
- indx = find_first_bit(cmdq->cmdq_bitmap, cmdq->bmap_size);
- if (indx != cmdq->bmap_size)
+ indx = find_first_bit(cmdq->cmdq_bitmap, rcfw->cmdq_depth);
+ if (indx != rcfw->cmdq_depth)
dev_err(&rcfw->pdev->dev,
"disabling RCFW with pending cmd-bit %lx\n", indx);
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
index 9474c00465821..0c6d0b70ce890 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
@@ -152,7 +152,6 @@ struct bnxt_qplib_cmdq_ctx {
wait_queue_head_t waitq;
unsigned long flags;
unsigned long *cmdq_bitmap;
- u32 bmap_size;
u32 seq_num;
};
--
2.34.1
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 0527b19fa4f390a6054612e1fa1dd4f8efc96739 ]
Tests on device show the JD2 mode does not work at all, the 'Headphone
Jack' and 'Headset Mic Jack' are shown as 'on' always.
JD1 seems to be the better option, with at least a change between the
two cases.
Jack not plugged-in:
[root@fedora ~]# amixer -Dhw:0 cget numid=12
numid=12,iface=CARD,name='Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
Jack plugged-in:
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
The 'Headset Mic Jack' is updated with a delay which seems normal with
additional calibration needed.
Fixes: d92e279dee56 ('ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible')
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/sof_sdw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index f10496206ceed..76759b2099064 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -188,7 +188,7 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
},
.driver_data = (void *)(SOF_SDW_TGL_HDMI |
SOF_SDW_PCH_DMIC |
- RT711_JD2),
+ RT711_JD1),
},
{
/* NUC15 'Bishop County' LAPBC510 and LAPBC710 skews */
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit 33748744f15a110a233b6ae0380f476006e770f0 ]
of_genpd_add_provider_simple() might fail, this patch makes sure we check
the return value of of_genpd_add_provider_simple() by propagating the
return value to the caller of rzg2l_cpg_add_clk_domain().
Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/renesas/rzg2l-cpg.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index 61e7c0c4f3794..1c92e73cd2b8c 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -666,8 +666,7 @@ static int __init rzg2l_cpg_add_clk_domain(struct device *dev)
if (ret)
return ret;
- of_genpd_add_provider_simple(np, genpd);
- return 0;
+ return of_genpd_add_provider_simple(np, genpd);
}
static int __init rzg2l_cpg_probe(struct platform_device *pdev)
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit 2039cc1da4bee1fd0df644e26b28ed769cd32a81 ]
Commit 045442228868 ("ASoC: codecs: wcd938x: add audio routing and
Kconfig") adds SND_SOC_WCD937X, which does not exist, and
SND_SOC_WCD938X, which seems not really to be the intended config to be
selected, but only a supporting config symbol to the actual config
SND_SOC_WCD938X_SDW for the codec.
Add SND_SOC_WCD938_SDW to the list instead of SND_SOC_WCD93{7,8}X.
The issue was identified with ./scripts/checkkconfigsymbols.py.
Fixes: 045442228868 ("ASoC: codecs: wcd938x: add audio routing and Kconfig")
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/Kconfig | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 216cea04ad704..f12c9b9426788 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -235,8 +235,7 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_UDA1380
imply SND_SOC_WCD9335
imply SND_SOC_WCD934X
- imply SND_SOC_WCD937X
- imply SND_SOC_WCD938X
+ imply SND_SOC_WCD938X_SDW
imply SND_SOC_LPASS_RX_MACRO
imply SND_SOC_LPASS_TX_MACRO
imply SND_SOC_WL1273
--
2.34.1
From: Paul Chaignon <[email protected]>
[ Upstream commit 1a1a0b0364ad291bd8e509da104ac8b5b1afec5d ]
The output of bpftool prog tracelog is currently buffered, which is
inconvenient when piping the output into other commands. A simple
tracelog | grep will typically not display anything. This patch fixes it
by enabling line buffering on stdout for the whole bpftool binary.
Fixes: 30da46b5dc3a ("tools: bpftool: add a command to dump the trace pipe")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Paul Chaignon <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/20211220214528.GA11706@Mem
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/bpf/bpftool/main.c b/tools/bpf/bpftool/main.c
index 02eaaf065f651..d27ec4f852bbb 100644
--- a/tools/bpf/bpftool/main.c
+++ b/tools/bpf/bpftool/main.c
@@ -402,6 +402,8 @@ int main(int argc, char **argv)
};
int opt, ret;
+ setlinebuf(stdout);
+
last_do_help = do_help;
pretty_output = false;
json_output = false;
--
2.34.1
From: Jernej Skrabec <[email protected]>
[ Upstream commit 37af43b250fda6162005d47bf7c959c70d52b107 ]
If clocks for some reason couldn't be enabled, probe function returns
immediately, without disabling PM. This obviously leaves PM ref counters
unbalanced.
Fix that by jumping to appropriate error path, so effects of PM functions
are reversed.
Fixes: 775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Jernej Skrabec <[email protected]>
Acked-by: Andrzej Pietrasiewicz <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/hantro/hantro_drv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 20e5081588719..281aa585e3375 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -958,7 +958,7 @@ static int hantro_probe(struct platform_device *pdev)
ret = clk_bulk_prepare(vpu->variant->num_clocks, vpu->clocks);
if (ret) {
dev_err(&pdev->dev, "Failed to prepare clocks\n");
- return ret;
+ goto err_pm_disable;
}
ret = v4l2_device_register(&pdev->dev, &vpu->v4l2_dev);
@@ -1014,6 +1014,7 @@ err_v4l2_unreg:
v4l2_device_unregister(&vpu->v4l2_dev);
err_clk_unprepare:
clk_bulk_unprepare(vpu->variant->num_clocks, vpu->clocks);
+err_pm_disable:
pm_runtime_dont_use_autosuspend(vpu->dev);
pm_runtime_disable(vpu->dev);
return ret;
--
2.34.1
From: Jan Kara <[email protected]>
[ Upstream commit 173b6e383d2a204c9921ffc1eca3b87aa2106c33 ]
A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason. After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.
CC: Lukas Czerner <[email protected]>
Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/ioctl.c | 2 --
fs/ext4/mballoc.c | 8 ++++++++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 606dee9e08a32..220a4c8178b5e 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -1117,8 +1117,6 @@ resizefs_out:
sizeof(range)))
return -EFAULT;
- range.minlen = max((unsigned int)range.minlen,
- q->limits.discard_granularity);
ret = ext4_trim_fs(sb, &range);
if (ret < 0)
return ret;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 72bfac2d6dce9..7174add7b1539 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -6405,6 +6405,7 @@ ext4_trim_all_free(struct super_block *sb, ext4_group_t group,
*/
int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
{
+ struct request_queue *q = bdev_get_queue(sb->s_bdev);
struct ext4_group_info *grp;
ext4_group_t group, first_group, last_group;
ext4_grpblk_t cnt = 0, first_cluster, last_cluster;
@@ -6423,6 +6424,13 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
start >= max_blks ||
range->len < sb->s_blocksize)
return -EINVAL;
+ /* No point to try to trim less than discard granularity */
+ if (range->minlen < q->limits.discard_granularity) {
+ minlen = EXT4_NUM_B2C(EXT4_SB(sb),
+ q->limits.discard_granularity >> sb->s_blocksize_bits);
+ if (minlen > EXT4_CLUSTERS_PER_GROUP(sb))
+ goto out;
+ }
if (end >= max_blks)
end = max_blks - 1;
if (end <= first_data_blk)
--
2.34.1
From: Robin Murphy <[email protected]>
[ Upstream commit 5566174cb10a5167d59b0793871cab7990b149b8 ]
Upon failure, dma_alloc_coherent() returns NULL. If that does happen,
passing some uninitialised stack contents to dma_mapping_error() - which
belongs to a different API in the first place - has precious little
chance of detecting it.
Also include the correct header, because the fragile transitive
inclusion currently providing it is going to break soon.
Fixes: 20e7dce255e9 ("drm/tegra: Remove memory allocation from Falcon library")
CC: Thierry Reding <[email protected]>
CC: Mikko Perttunen <[email protected]>
CC: [email protected]
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/tegra/vic.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/tegra/vic.c b/drivers/gpu/drm/tegra/vic.c
index c02010ff2b7f2..da4af53719917 100644
--- a/drivers/gpu/drm/tegra/vic.c
+++ b/drivers/gpu/drm/tegra/vic.c
@@ -5,6 +5,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/host1x.h>
#include <linux/iommu.h>
#include <linux/module.h>
@@ -232,10 +233,8 @@ static int vic_load_firmware(struct vic *vic)
if (!client->group) {
virt = dma_alloc_coherent(vic->dev, size, &iova, GFP_KERNEL);
-
- err = dma_mapping_error(vic->dev, iova);
- if (err < 0)
- return err;
+ if (!virt)
+ return -ENOMEM;
} else {
virt = tegra_drm_alloc(tegra, size, &iova);
}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 0589e8889dce8e0f0ea5bbf757f38865e2a469c1 ]
Add the missing platform_device_put() before return from
sysfb_create_simplefb() in the error handling case.
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/sysfb_simplefb.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/sysfb_simplefb.c b/drivers/firmware/sysfb_simplefb.c
index b86761904949c..303a491e520d1 100644
--- a/drivers/firmware/sysfb_simplefb.c
+++ b/drivers/firmware/sysfb_simplefb.c
@@ -113,12 +113,16 @@ __init int sysfb_create_simplefb(const struct screen_info *si,
sysfb_apply_efi_quirks(pd);
ret = platform_device_add_resources(pd, &res, 1);
- if (ret)
+ if (ret) {
+ platform_device_put(pd);
return ret;
+ }
ret = platform_device_add_data(pd, mode, sizeof(*mode));
- if (ret)
+ if (ret) {
+ platform_device_put(pd);
return ret;
+ }
return platform_device_add(pd);
}
--
2.34.1
From: Antony Antony <[email protected]>
[ Upstream commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 ]
xfrm ineterface does not allow xfrm if_id = 0
fail to create or update xfrm state and policy.
With this commit:
ip xfrm policy add src 192.0.2.1 dst 192.0.2.2 dir out if_id 0
RTNETLINK answers: Invalid argument
ip xfrm state add src 192.0.2.1 dst 192.0.2.2 proto esp spi 1 \
reqid 1 mode tunnel aead 'rfc4106(gcm(aes))' \
0x1111111111111111111111111111111111111111 96 if_id 0
RTNETLINK answers: Invalid argument
v1->v2 change:
- add Fixes: tag
Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_user.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 11574314de09f..5ad7530f65457 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -621,8 +621,13 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
xfrm_smark_init(attrs, &x->props.smark);
- if (attrs[XFRMA_IF_ID])
+ if (attrs[XFRMA_IF_ID]) {
x->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+ if (!x->if_id) {
+ err = -EINVAL;
+ goto error;
+ }
+ }
err = __xfrm_init_state(x, false, attrs[XFRMA_OFFLOAD_DEV]);
if (err)
@@ -1413,8 +1418,13 @@ static int xfrm_alloc_userspi(struct sk_buff *skb, struct nlmsghdr *nlh,
mark = xfrm_mark_get(attrs, &m);
- if (attrs[XFRMA_IF_ID])
+ if (attrs[XFRMA_IF_ID]) {
if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+ if (!if_id) {
+ err = -EINVAL;
+ goto out_noput;
+ }
+ }
if (p->info.seq) {
x = xfrm_find_acq_byseq(net, mark, p->info.seq);
@@ -1727,8 +1737,13 @@ static struct xfrm_policy *xfrm_policy_construct(struct net *net, struct xfrm_us
xfrm_mark_get(attrs, &xp->mark);
- if (attrs[XFRMA_IF_ID])
+ if (attrs[XFRMA_IF_ID]) {
xp->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+ if (!xp->if_id) {
+ err = -EINVAL;
+ goto error;
+ }
+ }
return xp;
error:
--
2.34.1
From: Christophe Jaillet <[email protected]>
[ Upstream commit e96d52822f5ac0a25de78f95cd23421bcbc93584 ]
Commit 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent
queries") has moved some code around without updating the error handling
path.
This is now pointless to 'goto out_err' when neither 'clk_enable()' nor
'ioremap()' have been called yet.
Make a direct return instead to avoid undoing things that have not been
done.
Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries")
Signed-off-by: Christophe Jaillet <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index e2df1098a812f..36d1ad8f479d7 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -952,7 +952,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
if (rc < 0)
- goto out_err;
+ return rc;
priv->manufacturer_id = vendor;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit b52fe2dbb3e655eb1483000adfab68a219549e13 ]
Since the acpi_create_platform_device() function may return error
pointers, dwc3_qcom_create_urs_usb_platdev() function may return error
pointers too. Using IS_ERR_OR_NULL() to check the return value to fix this.
Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/dwc3-qcom.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 3cb01cdd02c29..b81a9e1c13153 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -769,9 +769,12 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
if (qcom->acpi_pdata->is_urs) {
qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
- if (!qcom->urs_usb) {
+ if (IS_ERR_OR_NULL(qcom->urs_usb)) {
dev_err(dev, "failed to create URS USB platdev\n");
- return -ENODEV;
+ if (!qcom->urs_usb)
+ return -ENODEV;
+ else
+ return PTR_ERR(qcom->urs_usb);
}
}
}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 6845667146a28c09b5dfc401c1ad112374087944 ]
The function devm_gpiod_get_index() return error pointers on error.
Thus devm_gpiod_get_index_optional() could return NULL and error pointers.
The same as devm_gpiod_get_optional() function. Using IS_ERR_OR_NULL()
check to catch error pointers.
Fixes: 77131dfe ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_qca.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 3c26fc8463923..8eb7fddfb9300 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2058,14 +2058,14 @@ static int qca_serdev_probe(struct serdev_device *serdev)
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
- if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) {
+ if (IS_ERR_OR_NULL(qcadev->bt_en) && data->soc_type == QCA_WCN6750) {
dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
power_ctrl_enabled = false;
}
qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
GPIOD_IN);
- if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
+ if (IS_ERR_OR_NULL(qcadev->sw_ctrl) && data->soc_type == QCA_WCN6750)
dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2087,7 +2087,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
- if (!qcadev->bt_en) {
+ if (IS_ERR_OR_NULL(qcadev->bt_en)) {
dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
power_ctrl_enabled = false;
}
--
2.34.1
From: Kris Van Hees <[email protected]>
[ Upstream commit a5bebc4f00dee47113eed48098c68e88b5ba70e8 ]
Commit bfc6bb74e4f1 ("bpf: Implement verifier support for validation of async callbacks.")
added support for BPF_FUNC_timer_set_callback to
the __check_func_call() function. The test in __check_func_call() is
flaweed because it can mis-interpret a regular BPF-to-BPF pseudo-call
as a BPF_FUNC_timer_set_callback callback call.
Consider the conditional in the code:
if (insn->code == (BPF_JMP | BPF_CALL) &&
insn->imm == BPF_FUNC_timer_set_callback) {
The BPF_FUNC_timer_set_callback has value 170. This means that if you
have a BPF program that contains a pseudo-call with an instruction delta
of 170, this conditional will be found to be true by the verifier, and
it will interpret the pseudo-call as a callback. This leads to a mess
with the verification of the program because it makes the wrong
assumptions about the nature of this call.
Solution: include an explicit check to ensure that insn->src_reg == 0.
This ensures that calls cannot be mis-interpreted as an async callback
call.
Fixes: bfc6bb74e4f1 ("bpf: Implement verifier support for validation of async callbacks.")
Signed-off-by: Kris Van Hees <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 7be72682dfda0..94f7f6ac136fb 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5785,6 +5785,7 @@ static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn
}
if (insn->code == (BPF_JMP | BPF_CALL) &&
+ insn->src_reg == 0 &&
insn->imm == BPF_FUNC_timer_set_callback) {
struct bpf_verifier_state *async_cb;
--
2.34.1
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 4e1860a3863707e8177329c006d10f9e37e097a8 ]
IP fragments do not come with the transport header, hence skip bogus
layer 4 checksum updates.
Fixes: 1814096980bb ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields")
Reported-and-tested-by: Steffen Weinreich <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_payload.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c
index a44b14f6c0dc0..132875cd7fff2 100644
--- a/net/netfilter/nft_payload.c
+++ b/net/netfilter/nft_payload.c
@@ -502,6 +502,9 @@ static int nft_payload_l4csum_offset(const struct nft_pktinfo *pkt,
struct sk_buff *skb,
unsigned int *l4csum_offset)
{
+ if (pkt->fragoff)
+ return -1;
+
switch (pkt->tprot) {
case IPPROTO_TCP:
*l4csum_offset = offsetof(struct tcphdr, check);
--
2.34.1
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit 04c350b1ae6bdb12b84009a4d0bf5ab4e621c47b ]
The commit 4057765f2dee ("sock: consistent handling of extreme
SO_SNDBUF/SO_RCVBUF values") added a change to prevent underflow
in setsockopt() around SO_SNDBUF/SO_RCVBUF.
This patch adds the same change to _bpf_setsockopt().
Fixes: 4057765f2dee ("sock: consistent handling of extreme SO_SNDBUF/SO_RCVBUF values")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/filter.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/core/filter.c b/net/core/filter.c
index 1e6831880d1fd..1e43ab413b62e 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4742,12 +4742,14 @@ static int _bpf_setsockopt(struct sock *sk, int level, int optname,
switch (optname) {
case SO_RCVBUF:
val = min_t(u32, val, sysctl_rmem_max);
+ val = min_t(int, val, INT_MAX / 2);
sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
WRITE_ONCE(sk->sk_rcvbuf,
max_t(int, val * 2, SOCK_MIN_RCVBUF));
break;
case SO_SNDBUF:
val = min_t(u32, val, sysctl_wmem_max);
+ val = min_t(int, val, INT_MAX / 2);
sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
WRITE_ONCE(sk->sk_sndbuf,
max_t(int, val * 2, SOCK_MIN_SNDBUF));
--
2.34.1
From: Shay Drory <[email protected]>
[ Upstream commit a1c7c49c2091926962f8c1c866d386febffec5d8 ]
Even when SF devices are supported, the SF device table allocation
can still fail.
In such case mlx5_sf_dev_supported still reports true, but SF device
table is invalid. This can result in NULL table access.
Hence, fix it by adding NULL table check.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Shay Drory <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c
index 871c2fbe18d39..64bbc18332d56 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c
@@ -28,10 +28,7 @@ bool mlx5_sf_dev_allocated(const struct mlx5_core_dev *dev)
{
struct mlx5_sf_dev_table *table = dev->priv.sf_dev_table;
- if (!mlx5_sf_dev_supported(dev))
- return false;
-
- return !xa_empty(&table->devices);
+ return table && !xa_empty(&table->devices);
}
static ssize_t sfnum_show(struct device *dev, struct device_attribute *attr, char *buf)
--
2.34.1
From: Geliang Tang <[email protected]>
[ Upstream commit 110b6d1fe98fd7af9893992459b651594d789293 ]
'ptr += 1;' was omitted in the original code.
If the DSS is the last option -- which is what we have most of the
time -- that's not an issue. But it is if we need to send something else
after like a RM_ADDR or an MP_PRIO.
Fixes: 1bff1e43a30e ("mptcp: optimize out option generation")
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mptcp/options.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index f69a1cadb13fc..e515ba9ccb5d8 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -1321,6 +1321,7 @@ void mptcp_write_options(__be32 *ptr, const struct tcp_sock *tp,
put_unaligned_be32(mpext->data_len << 16 |
TCPOPT_NOP << 8 | TCPOPT_NOP, ptr);
}
+ ptr += 1;
}
} else if ((OPTION_MPTCP_MPC_SYN | OPTION_MPTCP_MPC_SYNACK |
OPTION_MPTCP_MPC_ACK) & opts->suboptions) {
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 85e73968a040c642fd38f6cba5b73b61f5d0f052 ]
When creating an external event, the current time needs to
be propagated to other participants of a simulation. This
is done in the places here where we kick a virtq etc.
However, it must be done for _all_ external events, and
that includes making the initial socket connection and
later closing it. Call time_travel_propagate_time() to do
this before making or closing the socket connection.
Apparently, at least for the initial connection creation,
due to the remote side in my use cases using microseconds
(rather than nanoseconds), this wasn't a problem yet; only
started failing between 5.14-rc1 and 5.15-rc1 (didn't test
others much), or possibly depending on the configuration,
where more delays happen before the virtio devices are
initialized.
Fixes: 88ce64249233 ("um: Implement time-travel=ext")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/drivers/virtio_uml.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/um/drivers/virtio_uml.c b/arch/um/drivers/virtio_uml.c
index d51e445df7976..7755cb4ff9fc6 100644
--- a/arch/um/drivers/virtio_uml.c
+++ b/arch/um/drivers/virtio_uml.c
@@ -1090,6 +1090,8 @@ static void virtio_uml_release_dev(struct device *d)
container_of(d, struct virtio_device, dev);
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
+ time_travel_propagate_time();
+
/* might not have been opened due to not negotiating the feature */
if (vu_dev->req_fd >= 0) {
um_free_irq(vu_dev->irq, vu_dev);
@@ -1136,6 +1138,8 @@ static int virtio_uml_probe(struct platform_device *pdev)
vu_dev->pdev = pdev;
vu_dev->req_fd = -1;
+ time_travel_propagate_time();
+
do {
rc = os_connect_socket(pdata->socket_path);
} while (rc == -EINTR);
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 7206998f578d5553989bc01ea2e544b622e79539 ]
When a codec is unbound dynamically via sysfs while its stream is in
use, we may face a potential deadlock at the proc remove or a UAF.
This happens since the hda_pcm is managed by a linked list, as it
handles the hda_pcm object release via kref.
When a PCM is opened at the unbinding time, the release of hda_pcm
gets delayed and it ends up with the close of the PCM stream releasing
the associated hda_pcm object of its own. The hda_pcm destructor
contains the PCM device release that includes the removal of procfs
entries. And, this removal has the sync of the close of all in-use
files -- which would never finish because it's called from the PCM
file descriptor itself, i.e. it's trying to shoot its foot.
For addressing the deadlock above, this patch changes the way to
manage and release the hda_pcm object. The kref of hda_pcm is
dropped, and instead a simple refcount is introduced in hda_codec for
keeping the track of the active PCM streams, and at each PCM open and
close, this refcount is adjusted accordingly. At unbinding, the
driver calls snd_device_disconnect() for each PCM stream, then
synchronizes with the refcount finish, and finally releases the object
resources.
Fixes: bbbc7e8502c9 ("ALSA: hda - Allocate hda_pcm objects dynamically")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/sound/hda_codec.h | 8 +++++---
sound/pci/hda/hda_bind.c | 5 +++++
sound/pci/hda/hda_codec.c | 42 ++++++++++++++++++++++++---------------
sound/pci/hda/hda_local.h | 1 +
4 files changed, 37 insertions(+), 19 deletions(-)
diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index 0e45963bb767f..82d9daa178517 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -8,7 +8,7 @@
#ifndef __SOUND_HDA_CODEC_H
#define __SOUND_HDA_CODEC_H
-#include <linux/kref.h>
+#include <linux/refcount.h>
#include <linux/mod_devicetable.h>
#include <sound/info.h>
#include <sound/control.h>
@@ -166,8 +166,8 @@ struct hda_pcm {
bool own_chmap; /* codec driver provides own channel maps */
/* private: */
struct hda_codec *codec;
- struct kref kref;
struct list_head list;
+ unsigned int disconnected:1;
};
/* codec information */
@@ -187,6 +187,8 @@ struct hda_codec {
/* PCM to create, set by patch_ops.build_pcms callback */
struct list_head pcm_list_head;
+ refcount_t pcm_ref;
+ wait_queue_head_t remove_sleep;
/* codec specific info */
void *spec;
@@ -420,7 +422,7 @@ void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec);
static inline void snd_hda_codec_pcm_get(struct hda_pcm *pcm)
{
- kref_get(&pcm->kref);
+ refcount_inc(&pcm->codec->pcm_ref);
}
void snd_hda_codec_pcm_put(struct hda_pcm *pcm);
diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c
index 1c8bffc3eec6e..7153bd53e1893 100644
--- a/sound/pci/hda/hda_bind.c
+++ b/sound/pci/hda/hda_bind.c
@@ -156,6 +156,11 @@ static int hda_codec_driver_remove(struct device *dev)
return codec->bus->core.ext_ops->hdev_detach(&codec->core);
}
+ refcount_dec(&codec->pcm_ref);
+ snd_hda_codec_disconnect_pcms(codec);
+ wait_event(codec->remove_sleep, !refcount_read(&codec->pcm_ref));
+ snd_power_sync_ref(codec->bus->card);
+
if (codec->patch_ops.free)
codec->patch_ops.free(codec);
snd_hda_codec_cleanup_for_unbind(codec);
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index eda70814369bd..7016b48227bf2 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -703,20 +703,10 @@ get_hda_cvt_setup(struct hda_codec *codec, hda_nid_t nid)
/*
* PCM device
*/
-static void release_pcm(struct kref *kref)
-{
- struct hda_pcm *pcm = container_of(kref, struct hda_pcm, kref);
-
- if (pcm->pcm)
- snd_device_free(pcm->codec->card, pcm->pcm);
- clear_bit(pcm->device, pcm->codec->bus->pcm_dev_bits);
- kfree(pcm->name);
- kfree(pcm);
-}
-
void snd_hda_codec_pcm_put(struct hda_pcm *pcm)
{
- kref_put(&pcm->kref, release_pcm);
+ if (refcount_dec_and_test(&pcm->codec->pcm_ref))
+ wake_up(&pcm->codec->remove_sleep);
}
EXPORT_SYMBOL_GPL(snd_hda_codec_pcm_put);
@@ -731,7 +721,6 @@ struct hda_pcm *snd_hda_codec_pcm_new(struct hda_codec *codec,
return NULL;
pcm->codec = codec;
- kref_init(&pcm->kref);
va_start(args, fmt);
pcm->name = kvasprintf(GFP_KERNEL, fmt, args);
va_end(args);
@@ -741,6 +730,7 @@ struct hda_pcm *snd_hda_codec_pcm_new(struct hda_codec *codec,
}
list_add_tail(&pcm->list, &codec->pcm_list_head);
+ refcount_inc(&codec->pcm_ref);
return pcm;
}
EXPORT_SYMBOL_GPL(snd_hda_codec_pcm_new);
@@ -748,15 +738,31 @@ EXPORT_SYMBOL_GPL(snd_hda_codec_pcm_new);
/*
* codec destructor
*/
+void snd_hda_codec_disconnect_pcms(struct hda_codec *codec)
+{
+ struct hda_pcm *pcm;
+
+ list_for_each_entry(pcm, &codec->pcm_list_head, list) {
+ if (pcm->disconnected)
+ continue;
+ if (pcm->pcm)
+ snd_device_disconnect(codec->card, pcm->pcm);
+ snd_hda_codec_pcm_put(pcm);
+ pcm->disconnected = 1;
+ }
+}
+
static void codec_release_pcms(struct hda_codec *codec)
{
struct hda_pcm *pcm, *n;
list_for_each_entry_safe(pcm, n, &codec->pcm_list_head, list) {
- list_del_init(&pcm->list);
+ list_del(&pcm->list);
if (pcm->pcm)
- snd_device_disconnect(codec->card, pcm->pcm);
- snd_hda_codec_pcm_put(pcm);
+ snd_device_free(pcm->codec->card, pcm->pcm);
+ clear_bit(pcm->device, pcm->codec->bus->pcm_dev_bits);
+ kfree(pcm->name);
+ kfree(pcm);
}
}
@@ -769,6 +775,7 @@ void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec)
codec->registered = 0;
}
+ snd_hda_codec_disconnect_pcms(codec);
cancel_delayed_work_sync(&codec->jackpoll_work);
if (!codec->in_freeing)
snd_hda_ctls_clear(codec);
@@ -792,6 +799,7 @@ void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec)
remove_conn_list(codec);
snd_hdac_regmap_exit(&codec->core);
codec->configured = 0;
+ refcount_set(&codec->pcm_ref, 1); /* reset refcount */
}
EXPORT_SYMBOL_GPL(snd_hda_codec_cleanup_for_unbind);
@@ -958,6 +966,8 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card,
snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
INIT_LIST_HEAD(&codec->conn_list);
INIT_LIST_HEAD(&codec->pcm_list_head);
+ refcount_set(&codec->pcm_ref, 1);
+ init_waitqueue_head(&codec->remove_sleep);
INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
codec->depop_delay = -1;
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index d22c96eb2f8fb..8621f576446b8 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -137,6 +137,7 @@ int __snd_hda_add_vmaster(struct hda_codec *codec, char *name,
int snd_hda_codec_reset(struct hda_codec *codec);
void snd_hda_codec_register(struct hda_codec *codec);
void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec);
+void snd_hda_codec_disconnect_pcms(struct hda_codec *codec);
#define snd_hda_regmap_sync(codec) snd_hdac_regmap_sync(&(codec)->core)
--
2.34.1
From: Nathan Errera <[email protected]>
[ Upstream commit 998e1aba6e5eb35370eaf30ccc1823426ec11f90 ]
In some cases the sta is being removed twice since we do not test the
roc aux running before removing it. Start looking at the bit before
removing the sta.
Signed-off-by: Nathan Errera <[email protected]>
Fixes: 2c2c3647cde4 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d5376ac6bcb0.Ic5f8470ea60c072bde9d1503e5f528b65e301e20@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/intel/iwlwifi/mvm/time-event.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index e91f8e889df70..f93f15357a3f8 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -49,14 +49,13 @@ void iwl_mvm_roc_done_wk(struct work_struct *wk)
struct iwl_mvm *mvm = container_of(wk, struct iwl_mvm, roc_done_wk);
/*
- * Clear the ROC_RUNNING /ROC_AUX_RUNNING status bit.
+ * Clear the ROC_RUNNING status bit.
* This will cause the TX path to drop offchannel transmissions.
* That would also be done by mac80211, but it is racy, in particular
* in the case that the time event actually completed in the firmware
* (which is handled in iwl_mvm_te_handle_notif).
*/
clear_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status);
- clear_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status);
synchronize_net();
@@ -82,9 +81,19 @@ void iwl_mvm_roc_done_wk(struct work_struct *wk)
mvmvif = iwl_mvm_vif_from_mac80211(mvm->p2p_device_vif);
iwl_mvm_flush_sta(mvm, &mvmvif->bcast_sta, true);
}
- } else {
+ }
+
+ /*
+ * Clear the ROC_AUX_RUNNING status bit.
+ * This will cause the TX path to drop offchannel transmissions.
+ * That would also be done by mac80211, but it is racy, in particular
+ * in the case that the time event actually completed in the firmware
+ * (which is handled in iwl_mvm_te_handle_notif).
+ */
+ if (test_and_clear_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status)) {
/* do the same in case of hot spot 2.0 */
iwl_mvm_flush_sta(mvm, &mvm->aux_sta, true);
+
/* In newer version of this command an aux station is added only
* in cases of dedicated tx queue and need to be removed in end
* of use */
--
2.34.1
From: Avraham Stern <[email protected]>
[ Upstream commit f4745cbb17572209a7fa27a6796ed70e7ada860b ]
The 6GHz passive scan is performed only once every 50 minutes.
However, in case of suspend/resume, the regulatory information
is reset, so 6GHz channels may become disabled.
Fix it by performing a 6GHz passive scan within 60 seconds after
suspend/resume even if the 50 minutes timeout did not expire yet.
Signed-off-by: Avraham Stern <[email protected]>
Fixes: e8fe3b41c3a3 ("iwlwifi: mvm: Add support for 6GHz passive scan")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.6d5c043372cf.I251dd5618a3f0b8febbcca788eb861f1cd6039bc@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 21 ++++++++-----------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index d78e436fa8b53..d4d562779d0a2 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1924,22 +1924,19 @@ static void iwl_mvm_scan_6ghz_passive_scan(struct iwl_mvm *mvm,
}
/*
- * 6GHz passive scan is allowed while associated in a defined time
- * interval following HW reset or resume flow
+ * 6GHz passive scan is allowed in a defined time interval following HW
+ * reset or resume flow, or while not associated and a large interval
+ * has passed since the last 6GHz passive scan.
*/
- if (vif->bss_conf.assoc &&
+ if ((vif->bss_conf.assoc ||
+ time_after(mvm->last_6ghz_passive_scan_jiffies +
+ (IWL_MVM_6GHZ_PASSIVE_SCAN_TIMEOUT * HZ), jiffies)) &&
(time_before(mvm->last_reset_or_resume_time_jiffies +
(IWL_MVM_6GHZ_PASSIVE_SCAN_ASSOC_TIMEOUT * HZ),
jiffies))) {
- IWL_DEBUG_SCAN(mvm, "6GHz passive scan: associated\n");
- return;
- }
-
- /* No need for 6GHz passive scan if not enough time elapsed */
- if (time_after(mvm->last_6ghz_passive_scan_jiffies +
- (IWL_MVM_6GHZ_PASSIVE_SCAN_TIMEOUT * HZ), jiffies)) {
- IWL_DEBUG_SCAN(mvm,
- "6GHz passive scan: timeout did not expire\n");
+ IWL_DEBUG_SCAN(mvm, "6GHz passive scan: %s\n",
+ vif->bss_conf.assoc ? "associated" :
+ "timeout did not expire");
return;
}
--
2.34.1
From: Wei Yongjun <[email protected]>
[ Upstream commit 1646566b5e0c556f779180a8514e521ac735de1e ]
'ftdi' is alloced when probe device, but not free on device disconnect,
this cause a memory leak as follows:
unreferenced object 0xffff88800d584000 (size 8400):
comm "kworker/0:2", pid 3809, jiffies 4295453055 (age 13.784s)
hex dump (first 32 bytes):
00 40 58 0d 80 88 ff ff 00 40 58 0d 80 88 ff ff .@X......@X.....
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
backtrace:
[<000000000d47f947>] kmalloc_order_trace+0x19/0x110 mm/slab_common.c:960
[<000000008548ac68>] ftdi_elan_probe+0x8c/0x880 drivers/usb/misc/ftdi-elan.c:2647
[<000000007f73e422>] usb_probe_interface+0x31b/0x800 drivers/usb/core/driver.c:396
[<00000000fe8d07fc>] really_probe+0x299/0xc30 drivers/base/dd.c:517
[<0000000005da7d32>] __driver_probe_device+0x357/0x500 drivers/base/dd.c:751
[<000000003c2c9579>] driver_probe_device+0x4e/0x140 drivers/base/dd.c:781
Fix it by freeing 'ftdi' after nobody use it.
Fixes: a5c66e4b2418 ("USB: ftdi-elan: client driver for ELAN Uxxx adapters")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/misc/ftdi-elan.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index e5a8fcdbb78e7..6c38c62d29b26 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -202,6 +202,7 @@ static void ftdi_elan_delete(struct kref *kref)
mutex_unlock(&ftdi_module_lock);
kfree(ftdi->bulk_in_buffer);
ftdi->bulk_in_buffer = NULL;
+ kfree(ftdi);
}
static void ftdi_elan_put_kref(struct usb_ftdi *ftdi)
--
2.34.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 4ccdcc8ffd955490feec05380223db6a48961eb5 ]
When building ARCH=arm allmodconfig:
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c: In function ‘iwl_mvm_ftm_rtt_smoothing’:
./include/asm-generic/div64.h:222:35: error: comparison of distinct pointer types lacks a cast [-Werror]
222 | (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
| ^~
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c:1070:9: note: in expansion of macro ‘do_div’
1070 | do_div(rtt_avg, 100);
| ^~~~~~
do_div() has to be used with an unsigned 64-bit integer dividend but
rtt_avg is a signed 64-bit integer.
div_s64() expects a signed 64-bit integer dividend and signed 32-bit
divisor, which fits this scenario, so use that function here to fix the
warning.
Fixes: 8b0f92549f2c ("iwlwifi: mvm: fix 32-bit build in FTM")
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
index 6e1d37f258035..bb5fff8174435 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
@@ -1054,8 +1054,7 @@ static void iwl_mvm_ftm_rtt_smoothing(struct iwl_mvm *mvm,
overshoot = IWL_MVM_FTM_INITIATOR_SMOOTH_OVERSHOOT;
alpha = IWL_MVM_FTM_INITIATOR_SMOOTH_ALPHA;
- rtt_avg = alpha * rtt + (100 - alpha) * resp->rtt_avg;
- do_div(rtt_avg, 100);
+ rtt_avg = div_s64(alpha * rtt + (100 - alpha) * resp->rtt_avg, 100);
IWL_DEBUG_INFO(mvm,
"%pM: prev rtt_avg=%lld, new rtt_avg=%lld, rtt=%lld\n",
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 69c1b87516e327a60b39f96b778fe683259408bf ]
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for meson_spifc_probe.
Fixes: c3e4bc5434d2 ("spi: meson: Add support for Amlogic Meson SPIFC")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-meson-spifc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c
index 8eca6f24cb799..c8ed7815c4ba6 100644
--- a/drivers/spi/spi-meson-spifc.c
+++ b/drivers/spi/spi-meson-spifc.c
@@ -349,6 +349,7 @@ static int meson_spifc_probe(struct platform_device *pdev)
return 0;
out_clk:
clk_disable_unprepare(spifc->clk);
+ pm_runtime_disable(spifc->dev);
out_err:
spi_master_put(master);
return ret;
--
2.34.1
From: Kamal Heib <[email protected]>
[ Upstream commit b1a4da64bfc189510e08df1ccb1c589e667dc7a3 ]
Fix the wrongly reported max_send_wr and max_recv_wr attributes for user
QP by making sure to save their valuse on QP creation, so when query QP is
called the attributes will be reported correctly.
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Acked-by: Michal Kalderon <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/qedr/verbs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 3d4e4a766574a..f652d083ff20f 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -1941,6 +1941,7 @@ static int qedr_create_user_qp(struct qedr_dev *dev,
/* db offset was calculated in copy_qp_uresp, now set in the user q */
if (qedr_qp_has_sq(qp)) {
qp->usq.db_addr = ctx->dpi_addr + uresp.sq_db_offset;
+ qp->sq.max_wr = attrs->cap.max_send_wr;
rc = qedr_db_recovery_add(dev, qp->usq.db_addr,
&qp->usq.db_rec_data->db_data,
DB_REC_WIDTH_32B,
@@ -1951,6 +1952,7 @@ static int qedr_create_user_qp(struct qedr_dev *dev,
if (qedr_qp_has_rq(qp)) {
qp->urq.db_addr = ctx->dpi_addr + uresp.rq_db_offset;
+ qp->rq.max_wr = attrs->cap.max_recv_wr;
rc = qedr_db_recovery_add(dev, qp->urq.db_addr,
&qp->urq.db_rec_data->db_data,
DB_REC_WIDTH_32B,
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit aa320fdbbbb482c19100f51461bd0069753ce3d7 ]
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443763 ("Null pointer dereference")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-uclogic-params.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 4136837e4d158..3e70f969fb849 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -452,7 +452,7 @@ static int uclogic_params_frame_init_v1_buttonpad(
{
int rc;
bool found = false;
- struct usb_device *usb_dev = hid_to_usb_dev(hdev);
+ struct usb_device *usb_dev;
char *str_buf = NULL;
const size_t str_len = 16;
@@ -462,6 +462,8 @@ static int uclogic_params_frame_init_v1_buttonpad(
goto cleanup;
}
+ usb_dev = hid_to_usb_dev(hdev);
+
/*
* Enable generic button mode
*/
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit dc35616e6c2907b0c0c391a205802d8880f7fd85 ]
This needs to copy an unsigned int from user space instead of a long to
avoid breaking user space with an API change.
I have updated all the integer overflow checks from ULONG to UINT as
well. This is a slight API change but I do not expect it to affect
anything in real life.
Fixes: 3087a6f36ee0 ("netrom: fix copying in user data in nr_setsockopt")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netrom/af_netrom.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index eef0e3f2f25b0..e5c8a295e6406 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -298,7 +298,7 @@ static int nr_setsockopt(struct socket *sock, int level, int optname,
{
struct sock *sk = sock->sk;
struct nr_sock *nr = nr_sk(sk);
- unsigned long opt;
+ unsigned int opt;
if (level != SOL_NETROM)
return -ENOPROTOOPT;
@@ -306,18 +306,18 @@ static int nr_setsockopt(struct socket *sock, int level, int optname,
if (optlen < sizeof(unsigned int))
return -EINVAL;
- if (copy_from_sockptr(&opt, optval, sizeof(unsigned long)))
+ if (copy_from_sockptr(&opt, optval, sizeof(opt)))
return -EFAULT;
switch (optname) {
case NETROM_T1:
- if (opt < 1 || opt > ULONG_MAX / HZ)
+ if (opt < 1 || opt > UINT_MAX / HZ)
return -EINVAL;
nr->t1 = opt * HZ;
return 0;
case NETROM_T2:
- if (opt < 1 || opt > ULONG_MAX / HZ)
+ if (opt < 1 || opt > UINT_MAX / HZ)
return -EINVAL;
nr->t2 = opt * HZ;
return 0;
@@ -329,13 +329,13 @@ static int nr_setsockopt(struct socket *sock, int level, int optname,
return 0;
case NETROM_T4:
- if (opt < 1 || opt > ULONG_MAX / HZ)
+ if (opt < 1 || opt > UINT_MAX / HZ)
return -EINVAL;
nr->t4 = opt * HZ;
return 0;
case NETROM_IDLE:
- if (opt > ULONG_MAX / (60 * HZ))
+ if (opt > UINT_MAX / (60 * HZ))
return -EINVAL;
nr->idle = opt * 60 * HZ;
return 0;
--
2.34.1
From: Paul Blakey <[email protected]>
[ Upstream commit 6f022c2ddbcefaee79502ce5386dfe351d457070 ]
Netfilter conntrack maintains NAT flags per connection indicating
whether NAT was configured for the connection. Openvswitch maintains
NAT flags on the per packet flow key ct_state field, indicating
whether NAT was actually executed on the packet.
When a packet misses from tc to ovs the conntrack NAT flags are set.
However, NAT was not necessarily executed on the packet because the
connection's state might still be in NEW state. As such, openvswitch
wrongly assumes that NAT was executed and sets an incorrect flow key
NAT flags.
Fix this, by flagging to openvswitch which NAT was actually done in
act_ct via tc_skb_ext and tc_skb_cb to the openvswitch module, so
the packet flow key NAT flags will be correctly set.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Paul Blakey <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/skbuff.h | 4 +++-
include/net/pkt_sched.h | 4 +++-
net/openvswitch/flow.c | 16 +++++++++++++---
net/sched/act_ct.c | 6 ++++++
net/sched/cls_api.c | 2 ++
5 files changed, 27 insertions(+), 5 deletions(-)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index f92839b726dc2..532f5d402f060 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -287,7 +287,9 @@ struct tc_skb_ext {
__u32 chain;
__u16 mru;
__u16 zone;
- bool post_ct;
+ u8 post_ct:1;
+ u8 post_ct_snat:1;
+ u8 post_ct_dnat:1;
};
#endif
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 9e71691c491b7..9e7b21c0b3a6d 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -197,7 +197,9 @@ struct tc_skb_cb {
struct qdisc_skb_cb qdisc_cb;
u16 mru;
- bool post_ct;
+ u8 post_ct:1;
+ u8 post_ct_snat:1;
+ u8 post_ct_dnat:1;
u16 zone; /* Only valid if post_ct = true */
};
diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index 6d262d9aa10ea..02096f2ec6784 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -859,7 +859,7 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
#if IS_ENABLED(CONFIG_NET_TC_SKB_EXT)
struct tc_skb_ext *tc_ext;
#endif
- bool post_ct = false;
+ bool post_ct = false, post_ct_snat = false, post_ct_dnat = false;
int res, err;
u16 zone = 0;
@@ -900,6 +900,8 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
key->recirc_id = tc_ext ? tc_ext->chain : 0;
OVS_CB(skb)->mru = tc_ext ? tc_ext->mru : 0;
post_ct = tc_ext ? tc_ext->post_ct : false;
+ post_ct_snat = post_ct ? tc_ext->post_ct_snat : false;
+ post_ct_dnat = post_ct ? tc_ext->post_ct_dnat : false;
zone = post_ct ? tc_ext->zone : 0;
} else {
key->recirc_id = 0;
@@ -911,8 +913,16 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
err = key_extract(skb, key);
if (!err) {
ovs_ct_fill_key(skb, key, post_ct); /* Must be after key_extract(). */
- if (post_ct && !skb_get_nfct(skb))
- key->ct_zone = zone;
+ if (post_ct) {
+ if (!skb_get_nfct(skb)) {
+ key->ct_zone = zone;
+ } else {
+ if (!post_ct_dnat)
+ key->ct_state &= ~OVS_CS_F_DST_NAT;
+ if (!post_ct_snat)
+ key->ct_state &= ~OVS_CS_F_SRC_NAT;
+ }
+ }
}
return err;
}
diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index ab3591408419f..2a17eb77c9049 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -839,6 +839,12 @@ static int ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
}
err = nf_nat_packet(ct, ctinfo, hooknum, skb);
+ if (err == NF_ACCEPT) {
+ if (maniptype == NF_NAT_MANIP_SRC)
+ tc_skb_cb(skb)->post_ct_snat = 1;
+ if (maniptype == NF_NAT_MANIP_DST)
+ tc_skb_cb(skb)->post_ct_dnat = 1;
+ }
out:
return err;
}
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 35c74bdde848e..cc9409aa755eb 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -1625,6 +1625,8 @@ int tcf_classify(struct sk_buff *skb,
ext->chain = last_executed_chain;
ext->mru = cb->mru;
ext->post_ct = cb->post_ct;
+ ext->post_ct_snat = cb->post_ct_snat;
+ ext->post_ct_dnat = cb->post_ct_dnat;
ext->zone = cb->zone;
}
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit 0a94131d6920916ccb6a357037c535533af08819 ]
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443827 ("Null pointer dereference")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-uclogic-params.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 3c10b858cf74c..3a83e2c39b4fb 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -66,7 +66,7 @@ static int uclogic_params_get_str_desc(__u8 **pbuf, struct hid_device *hdev,
__u8 idx, size_t len)
{
int rc;
- struct usb_device *udev = hid_to_usb_dev(hdev);
+ struct usb_device *udev;
__u8 *buf = NULL;
/* Check arguments */
@@ -75,6 +75,8 @@ static int uclogic_params_get_str_desc(__u8 **pbuf, struct hid_device *hdev,
goto cleanup;
}
+ udev = hid_to_usb_dev(hdev);
+
buf = kmalloc(len, GFP_KERNEL);
if (buf == NULL) {
rc = -ENOMEM;
--
2.34.1
From: Paul Blakey <[email protected]>
[ Upstream commit 635d448a1cce4b4ebee52b351052c70434fa90ea ]
Zone id is not restored if we passed ct and ct rejected the connection,
as there is no ct info on the skb.
Save the zone from tc skb cb to tc skb extension and pass it on to
ovs, use that info to restore the zone id for invalid connections.
Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Paul Blakey <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/skbuff.h | 1 +
net/openvswitch/flow.c | 8 +++++++-
net/sched/cls_api.c | 1 +
3 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 4f31ca71a82a7..f92839b726dc2 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -286,6 +286,7 @@ struct nf_bridge_info {
struct tc_skb_ext {
__u32 chain;
__u16 mru;
+ __u16 zone;
bool post_ct;
};
#endif
diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index 9713035b89e3a..6d262d9aa10ea 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -34,6 +34,7 @@
#include <net/mpls.h>
#include <net/ndisc.h>
#include <net/nsh.h>
+#include <net/netfilter/nf_conntrack_zones.h>
#include "conntrack.h"
#include "datapath.h"
@@ -860,6 +861,7 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
#endif
bool post_ct = false;
int res, err;
+ u16 zone = 0;
/* Extract metadata from packet. */
if (tun_info) {
@@ -898,6 +900,7 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
key->recirc_id = tc_ext ? tc_ext->chain : 0;
OVS_CB(skb)->mru = tc_ext ? tc_ext->mru : 0;
post_ct = tc_ext ? tc_ext->post_ct : false;
+ zone = post_ct ? tc_ext->zone : 0;
} else {
key->recirc_id = 0;
}
@@ -906,8 +909,11 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
#endif
err = key_extract(skb, key);
- if (!err)
+ if (!err) {
ovs_ct_fill_key(skb, key, post_ct); /* Must be after key_extract(). */
+ if (post_ct && !skb_get_nfct(skb))
+ key->ct_zone = zone;
+ }
return err;
}
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index ff8a9383bf1c4..35c74bdde848e 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -1625,6 +1625,7 @@ int tcf_classify(struct sk_buff *skb,
ext->chain = last_executed_chain;
ext->mru = cb->mru;
ext->post_ct = cb->post_ct;
+ ext->zone = cb->zone;
}
return ret;
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 8b0f92549f2c2458200935c12a2e2a6e80234cf5 ]
On a 32-bit build, the division here needs to be done
using do_div(), otherwise the compiler will try to call
a function that doesn't exist, thus failing to build.
Fixes: b68bd2e3143a ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219111352.e56cbf614a4d.Ib98004ccd2c7a55fd883a8ea7eebd810f406dec6@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
index 03e5bf5cb9094..c7fee6a2f7fd4 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
@@ -1054,7 +1054,8 @@ static void iwl_mvm_ftm_rtt_smoothing(struct iwl_mvm *mvm,
overshoot = IWL_MVM_FTM_INITIATOR_SMOOTH_OVERSHOOT;
alpha = IWL_MVM_FTM_INITIATOR_SMOOTH_ALPHA;
- rtt_avg = (alpha * rtt + (100 - alpha) * resp->rtt_avg) / 100;
+ rtt_avg = alpha * rtt + (100 - alpha) * resp->rtt_avg;
+ do_div(rtt_avg, 100);
IWL_DEBUG_INFO(mvm,
"%pM: prev rtt_avg=%lld, new rtt_avg=%lld, rtt=%lld\n",
--
2.34.1
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 24f5e38a13b5ae2b6105cda8bb47c19108e62a9a ]
Many Intel based platforms face system random freeze after commit
9e2fd29864c5 ("rtw88: add napi support").
The commit itself shouldn't be the culprit. My guess is that the 8821CE
only leaves ASPM L1 for a short period when IRQ is raised. Since IRQ is
masked during NAPI polling, the PCIe link stays at L1 and makes RX DMA
extremely slow. Eventually the RX ring becomes messed up:
[ 1133.194697] rtw_8821ce 0000:02:00.0: pci bus timeout, check dma status
Since the 8821CE hardware may fail to leave ASPM L1, manually do it in
the driver to resolve the issue.
Fixes: 9e2fd29864c5 ("rtw88: add napi support")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215131
BugLink: https://bugs.launchpad.net/bugs/1927808
Signed-off-by: Kai-Heng Feng <[email protected]>
Acked-by: Jian-Hong Pan <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/pci.c | 70 +++++++-----------------
drivers/net/wireless/realtek/rtw88/pci.h | 2 +
2 files changed, 21 insertions(+), 51 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 3b367c9085eba..08cf66141889b 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -2,7 +2,6 @@
/* Copyright(c) 2018-2019 Realtek Corporation
*/
-#include <linux/dmi.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "main.h"
@@ -1409,7 +1408,11 @@ static void rtw_pci_link_ps(struct rtw_dev *rtwdev, bool enter)
* throughput. This is probably because the ASPM behavior slightly
* varies from different SOC.
*/
- if (rtwpci->link_ctrl & PCI_EXP_LNKCTL_ASPM_L1)
+ if (!(rtwpci->link_ctrl & PCI_EXP_LNKCTL_ASPM_L1))
+ return;
+
+ if ((enter && atomic_dec_if_positive(&rtwpci->link_usage) == 0) ||
+ (!enter && atomic_inc_return(&rtwpci->link_usage) == 1))
rtw_pci_aspm_set(rtwdev, enter);
}
@@ -1658,6 +1661,9 @@ static int rtw_pci_napi_poll(struct napi_struct *napi, int budget)
priv);
int work_done = 0;
+ if (rtwpci->rx_no_aspm)
+ rtw_pci_link_ps(rtwdev, false);
+
while (work_done < budget) {
u32 work_done_once;
@@ -1681,6 +1687,8 @@ static int rtw_pci_napi_poll(struct napi_struct *napi, int budget)
if (rtw_pci_get_hw_rx_ring_nr(rtwdev, rtwpci))
napi_schedule(napi);
}
+ if (rtwpci->rx_no_aspm)
+ rtw_pci_link_ps(rtwdev, true);
return work_done;
}
@@ -1702,59 +1710,13 @@ static void rtw_pci_napi_deinit(struct rtw_dev *rtwdev)
netif_napi_del(&rtwpci->napi);
}
-enum rtw88_quirk_dis_pci_caps {
- QUIRK_DIS_PCI_CAP_MSI,
- QUIRK_DIS_PCI_CAP_ASPM,
-};
-
-static int disable_pci_caps(const struct dmi_system_id *dmi)
-{
- uintptr_t dis_caps = (uintptr_t)dmi->driver_data;
-
- if (dis_caps & BIT(QUIRK_DIS_PCI_CAP_MSI))
- rtw_disable_msi = true;
- if (dis_caps & BIT(QUIRK_DIS_PCI_CAP_ASPM))
- rtw_pci_disable_aspm = true;
-
- return 1;
-}
-
-static const struct dmi_system_id rtw88_pci_quirks[] = {
- {
- .callback = disable_pci_caps,
- .ident = "Protempo Ltd L116HTN6SPW",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Protempo Ltd"),
- DMI_MATCH(DMI_PRODUCT_NAME, "L116HTN6SPW"),
- },
- .driver_data = (void *)BIT(QUIRK_DIS_PCI_CAP_ASPM),
- },
- {
- .callback = disable_pci_caps,
- .ident = "HP HP Pavilion Laptop 14-ce0xxx",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Laptop 14-ce0xxx"),
- },
- .driver_data = (void *)BIT(QUIRK_DIS_PCI_CAP_ASPM),
- },
- {
- .callback = disable_pci_caps,
- .ident = "HP HP 250 G7 Notebook PC",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP 250 G7 Notebook PC"),
- },
- .driver_data = (void *)BIT(QUIRK_DIS_PCI_CAP_ASPM),
- },
- {}
-};
-
int rtw_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ struct pci_dev *bridge = pci_upstream_bridge(pdev);
struct ieee80211_hw *hw;
struct rtw_dev *rtwdev;
+ struct rtw_pci *rtwpci;
int drv_data_size;
int ret;
@@ -1772,6 +1734,9 @@ int rtw_pci_probe(struct pci_dev *pdev,
rtwdev->hci.ops = &rtw_pci_ops;
rtwdev->hci.type = RTW_HCI_TYPE_PCIE;
+ rtwpci = (struct rtw_pci *)rtwdev->priv;
+ atomic_set(&rtwpci->link_usage, 1);
+
ret = rtw_core_init(rtwdev);
if (ret)
goto err_release_hw;
@@ -1800,7 +1765,10 @@ int rtw_pci_probe(struct pci_dev *pdev,
goto err_destroy_pci;
}
- dmi_check_system(rtw88_pci_quirks);
+ /* Disable PCIe ASPM L1 while doing NAPI poll for 8821CE */
+ if (pdev->device == 0xc821 && bridge->vendor == PCI_VENDOR_ID_INTEL)
+ rtwpci->rx_no_aspm = true;
+
rtw_pci_phy_cfg(rtwdev);
ret = rtw_register_hw(rtwdev, hw);
diff --git a/drivers/net/wireless/realtek/rtw88/pci.h b/drivers/net/wireless/realtek/rtw88/pci.h
index 66f78eb7757c5..0c37efd8c66fa 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.h
+++ b/drivers/net/wireless/realtek/rtw88/pci.h
@@ -223,6 +223,8 @@ struct rtw_pci {
struct rtw_pci_tx_ring tx_rings[RTK_MAX_TX_QUEUE_NUM];
struct rtw_pci_rx_ring rx_rings[RTK_MAX_RX_QUEUE_NUM];
u16 link_ctrl;
+ atomic_t link_usage;
+ bool rx_no_aspm;
DECLARE_BITMAP(flags, NUM_OF_RTW_PCI_FLAGS);
void __iomem *mmap;
--
2.34.1
From: Pavel Hofman <[email protected]>
[ Upstream commit 601a5bc1aeef772ab1f47582fd322957799f5ab5 ]
Both capture and playback alsa devices use subdevice 0. Yet capture-side
ctls are defined for subdevice 1. The patch sets subdevice 0 for them.
Fixes: 02de698ca812 ("usb: gadget: u_audio: add bi-directional volume and mute support")
Signed-off-by: Pavel Hofman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/u_audio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index ad16163b5ff80..d22ac23c94b0f 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -1097,7 +1097,7 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
}
kctl->id.device = pcm->device;
- kctl->id.subdevice = i;
+ kctl->id.subdevice = 0;
err = snd_ctl_add(card, kctl);
if (err < 0)
@@ -1120,7 +1120,7 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
}
kctl->id.device = pcm->device;
- kctl->id.subdevice = i;
+ kctl->id.subdevice = 0;
kctl->tlv.c = u_audio_volume_tlv;
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 5f8539e2ff962e25b57742ca7106456403abbc94 ]
Many places in the kernel use 'udelay' as an identifier, and
are broken with the current "#define udelay um_udelay". Fix
this by adding an argument to the macro, and do the same to
'ndelay' as well, just in case.
Fixes: 0bc8fb4dda2b ("um: Implement ndelay/udelay in time-travel mode")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/include/asm/delay.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/um/include/asm/delay.h b/arch/um/include/asm/delay.h
index 56fc2b8f2dd01..e79b2ab6f40c8 100644
--- a/arch/um/include/asm/delay.h
+++ b/arch/um/include/asm/delay.h
@@ -14,7 +14,7 @@ static inline void um_ndelay(unsigned long nsecs)
ndelay(nsecs);
}
#undef ndelay
-#define ndelay um_ndelay
+#define ndelay(n) um_ndelay(n)
static inline void um_udelay(unsigned long usecs)
{
@@ -26,5 +26,5 @@ static inline void um_udelay(unsigned long usecs)
udelay(usecs);
}
#undef udelay
-#define udelay um_udelay
+#define udelay(n) um_udelay(n)
#endif /* __UM_DELAY_H */
--
2.34.1
From: Edwin Peer <[email protected]>
[ Upstream commit bce9a0b7900836df223ab638090df0cb8430d9e8 ]
Some older devices cannot accommodate the 40 seconds timeout
cap for long running commands (such as NVRAM commands) due to
hardware limitations. Allow these devices to request more time for
these long running commands, but print a warning, since the longer
timeout may cause the hung task watchdog to trigger. In the case of a
firmware update operation, this is preferable to failing outright.
v2: Use bp->hwrm_cmd_max_timeout directly without the constants.
Fixes: 881d8353b05e ("bnxt_en: Add an upper bound for all firmware command timeouts.")
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 ++++++
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 3 ++-
drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c | 4 ++--
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 9 +++------
drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h | 3 +--
6 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 0fba01db336cc..a8855a200a3c5 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -8004,6 +8004,12 @@ static int bnxt_hwrm_ver_get(struct bnxt *bp)
bp->hwrm_cmd_timeout = le16_to_cpu(resp->def_req_timeout);
if (!bp->hwrm_cmd_timeout)
bp->hwrm_cmd_timeout = DFLT_HWRM_CMD_TIMEOUT;
+ bp->hwrm_cmd_max_timeout = le16_to_cpu(resp->max_req_timeout) * 1000;
+ if (!bp->hwrm_cmd_max_timeout)
+ bp->hwrm_cmd_max_timeout = HWRM_CMD_MAX_TIMEOUT;
+ else if (bp->hwrm_cmd_max_timeout > HWRM_CMD_MAX_TIMEOUT)
+ netdev_warn(bp->dev, "Device requests max timeout of %d seconds, may trigger hung task watchdog\n",
+ bp->hwrm_cmd_max_timeout / 1000);
if (resp->hwrm_intf_maj_8b >= 1) {
bp->hwrm_max_req_len = le16_to_cpu(resp->max_req_win_len);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 19fe6478e9b4b..0a5137c1f6d4e 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1901,7 +1901,8 @@ struct bnxt {
u16 hwrm_max_req_len;
u16 hwrm_max_ext_req_len;
- int hwrm_cmd_timeout;
+ unsigned int hwrm_cmd_timeout;
+ unsigned int hwrm_cmd_max_timeout;
struct mutex hwrm_cmd_lock; /* serialize hwrm messages */
struct hwrm_ver_get_output ver_resp;
#define FW_VER_STR_LEN 32
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
index 3e23fce3771e6..156f76bcea7eb 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
@@ -32,7 +32,7 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
return -ENOMEM;
}
- hwrm_req_timeout(bp, msg, HWRM_COREDUMP_TIMEOUT);
+ hwrm_req_timeout(bp, msg, bp->hwrm_cmd_max_timeout);
cmn_resp = hwrm_req_hold(bp, msg);
resp = cmn_resp;
@@ -125,7 +125,7 @@ static int bnxt_hwrm_dbg_coredump_initiate(struct bnxt *bp, u16 component_id,
if (rc)
return rc;
- hwrm_req_timeout(bp, req, HWRM_COREDUMP_TIMEOUT);
+ hwrm_req_timeout(bp, req, bp->hwrm_cmd_max_timeout);
req->component_id = cpu_to_le16(component_id);
req->segment_id = cpu_to_le16(segment_id);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index c5974b16670a8..2497925105215 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -31,9 +31,6 @@
#include "bnxt_nvm_defs.h" /* NVRAM content constant and structure defs */
#include "bnxt_fw_hdr.h" /* Firmware hdr constant and structure defs */
#include "bnxt_coredump.h"
-#define FLASH_NVRAM_TIMEOUT ((HWRM_CMD_TIMEOUT) * 100)
-#define FLASH_PACKAGE_TIMEOUT ((HWRM_CMD_TIMEOUT) * 200)
-#define INSTALL_PACKAGE_TIMEOUT ((HWRM_CMD_TIMEOUT) * 200)
static u32 bnxt_get_msglevel(struct net_device *dev)
{
@@ -2167,7 +2164,7 @@ static int bnxt_flash_nvram(struct net_device *dev, u16 dir_type,
req->host_src_addr = cpu_to_le64(dma_handle);
}
- hwrm_req_timeout(bp, req, FLASH_NVRAM_TIMEOUT);
+ hwrm_req_timeout(bp, req, bp->hwrm_cmd_max_timeout);
req->dir_type = cpu_to_le16(dir_type);
req->dir_ordinal = cpu_to_le16(dir_ordinal);
req->dir_ext = cpu_to_le16(dir_ext);
@@ -2508,8 +2505,8 @@ int bnxt_flash_package_from_fw_obj(struct net_device *dev, const struct firmware
return rc;
}
- hwrm_req_timeout(bp, modify, FLASH_PACKAGE_TIMEOUT);
- hwrm_req_timeout(bp, install, INSTALL_PACKAGE_TIMEOUT);
+ hwrm_req_timeout(bp, modify, bp->hwrm_cmd_max_timeout);
+ hwrm_req_timeout(bp, install, bp->hwrm_cmd_max_timeout);
hwrm_req_hold(bp, modify);
modify->host_src_addr = cpu_to_le64(dma_handle);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
index bb7327b82d0b2..8171f4912fa01 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
@@ -496,7 +496,7 @@ static int __hwrm_send(struct bnxt *bp, struct bnxt_hwrm_ctx *ctx)
}
/* Limit timeout to an upper limit */
- timeout = min_t(uint, ctx->timeout, HWRM_CMD_MAX_TIMEOUT);
+ timeout = min(ctx->timeout, bp->hwrm_cmd_max_timeout ?: HWRM_CMD_MAX_TIMEOUT);
/* convert timeout to usec */
timeout *= 1000;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
index 4d17f0d5363bb..9a9fc4e8041b6 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
@@ -58,11 +58,10 @@ void hwrm_update_token(struct bnxt *bp, u16 seq, enum bnxt_hwrm_wait_state s);
#define BNXT_HWRM_MAX_REQ_LEN (bp->hwrm_max_req_len)
#define BNXT_HWRM_SHORT_REQ_LEN sizeof(struct hwrm_short_input)
-#define HWRM_CMD_MAX_TIMEOUT 40000
+#define HWRM_CMD_MAX_TIMEOUT 40000U
#define SHORT_HWRM_CMD_TIMEOUT 20
#define HWRM_CMD_TIMEOUT (bp->hwrm_cmd_timeout)
#define HWRM_RESET_TIMEOUT ((HWRM_CMD_TIMEOUT) * 4)
-#define HWRM_COREDUMP_TIMEOUT ((HWRM_CMD_TIMEOUT) * 12)
#define BNXT_HWRM_TARGET 0xffff
#define BNXT_HWRM_NO_CMPL_RING -1
#define BNXT_HWRM_REQ_MAX_SIZE 128
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 9371937092d5fd502032c1bb4475b36b39b1f1b3 ]
The "opt" variable is unsigned long but we only copy 4 bytes from
the user so the lower 4 bytes are uninitialized.
I have changed the integer overflow checks from ULONG to UINT as well.
This is a slight API change but I don't expect it to break anything.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ax25/af_ax25.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index aa7785687e757..7473e0cc6d469 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -536,7 +536,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
ax25_cb *ax25;
struct net_device *dev;
char devname[IFNAMSIZ];
- unsigned long opt;
+ unsigned int opt;
int res = 0;
if (level != SOL_AX25)
@@ -568,7 +568,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
break;
case AX25_T1:
- if (opt < 1 || opt > ULONG_MAX / HZ) {
+ if (opt < 1 || opt > UINT_MAX / HZ) {
res = -EINVAL;
break;
}
@@ -577,7 +577,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
break;
case AX25_T2:
- if (opt < 1 || opt > ULONG_MAX / HZ) {
+ if (opt < 1 || opt > UINT_MAX / HZ) {
res = -EINVAL;
break;
}
@@ -593,7 +593,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
break;
case AX25_T3:
- if (opt < 1 || opt > ULONG_MAX / HZ) {
+ if (opt < 1 || opt > UINT_MAX / HZ) {
res = -EINVAL;
break;
}
@@ -601,7 +601,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
break;
case AX25_IDLE:
- if (opt > ULONG_MAX / (60 * HZ)) {
+ if (opt > UINT_MAX / (60 * HZ)) {
res = -EINVAL;
break;
}
--
2.34.1
From: Alyssa Ross <[email protected]>
[ Upstream commit 556172fabd226ba14b70c1740d0826a4717473dc ]
modprobe can't handle spaces in aliases.
Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver")
Signed-off-by: Alyssa Ross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/liteuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index 2941659e52747..7f74bf7bdcff8 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -436,4 +436,4 @@ module_exit(liteuart_exit);
MODULE_AUTHOR("Antmicro <http://www.antmicro.com>");
MODULE_DESCRIPTION("LiteUART serial driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform: liteuart");
+MODULE_ALIAS("platform:liteuart");
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 4894edacfa93d7046bec4fc61fc402ac6a2ac9e8 ]
Smatch complains that there is a double free in probe:
drivers/net/wireless/microchip/wilc1000/spi.c:186 wilc_bus_probe() error: double free of 'spi_priv'
drivers/net/wireless/microchip/wilc1000/sdio.c:163 wilc_sdio_probe() error: double free of 'sdio_priv'
The problem is that wilc_netdev_cleanup() function frees "wilc->bus_data".
That's confusing and a layering violation. Leave the frees in probe(),
delete the free in wilc_netdev_cleanup(), and add some new frees to the
remove() functions.
Fixes: dc8b338f3bcd ("wilc1000: use goto labels on error path")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20211217150311.GC16611@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/microchip/wilc1000/netdev.c | 1 -
drivers/net/wireless/microchip/wilc1000/sdio.c | 2 ++
drivers/net/wireless/microchip/wilc1000/spi.c | 2 ++
3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 7e4d9235251cb..9dfb1a285e6a4 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -901,7 +901,6 @@ void wilc_netdev_cleanup(struct wilc *wilc)
wilc_wlan_cfg_deinit(wilc);
wlan_deinit_locks(wilc);
- kfree(wilc->bus_data);
wiphy_unregister(wilc->wiphy);
wiphy_free(wilc->wiphy);
}
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 42e03a701ae16..8b3b735231085 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -167,9 +167,11 @@ free:
static void wilc_sdio_remove(struct sdio_func *func)
{
struct wilc *wilc = sdio_get_drvdata(func);
+ struct wilc_sdio *sdio_priv = wilc->bus_data;
clk_disable_unprepare(wilc->rtc_clk);
wilc_netdev_cleanup(wilc);
+ kfree(sdio_priv);
}
static int wilc_sdio_reset(struct wilc *wilc)
diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index dd481dc0b5ce0..c98c0999a6b67 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -182,9 +182,11 @@ free:
static int wilc_bus_remove(struct spi_device *spi)
{
struct wilc *wilc = spi_get_drvdata(spi);
+ struct wilc_spi *spi_priv = wilc->bus_data;
clk_disable_unprepare(wilc->rtc_clk);
wilc_netdev_cleanup(wilc);
+ kfree(spi_priv);
return 0;
}
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit c6564c13dae25cd7f8e1de5127b4da4500ee5844 ]
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq()
effectively convert that into -EINVAL, even at probe time rather than
later on. So it might be better to check just now.
Fixes: b1201e44f50b ("can: xilinx CAN controller support")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/xilinx_can.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 3b883e607d8ba..a579b9b791ede 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1762,7 +1762,12 @@ static int xcan_probe(struct platform_device *pdev)
spin_lock_init(&priv->tx_lock);
/* Get IRQ for the device */
- ndev->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err_free;
+
+ ndev->irq = ret;
+
ndev->flags |= IFF_ECHO; /* We support local echo */
platform_set_drvdata(pdev, ndev);
--
2.34.1
From: Ping-Ke Shih <[email protected]>
[ Upstream commit c81edb8dddaa36c4defa26240cc19127f147283f ]
8821CE causes random freezes on HP 250 G7 Notebook PC. Add a quirk
to disable pci ASPM capability.
Reported-by: rtl8821cerfe2 <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/pci.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index a7a6ebfaa203c..3b367c9085eba 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -1738,6 +1738,15 @@ static const struct dmi_system_id rtw88_pci_quirks[] = {
},
.driver_data = (void *)BIT(QUIRK_DIS_PCI_CAP_ASPM),
},
+ {
+ .callback = disable_pci_caps,
+ .ident = "HP HP 250 G7 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP 250 G7 Notebook PC"),
+ },
+ .driver_data = (void *)BIT(QUIRK_DIS_PCI_CAP_ASPM),
+ },
{}
};
--
2.34.1
From: Cezary Rojewski <[email protected]>
[ Upstream commit 2a9a72e290d4a4741e673f86b9fba9bfb319786d ]
After calling dmaengine_submit(), the submitted transfer descriptor
belongs to the DMA engine. Pointer to that descriptor may no longer be
valid after the call and should be tested before awaiting transfer
completion.
Reported-by: Kevin Tian <[email protected]>
Suggested-by: Dave Jiang <[email protected]>
Fixes: 4fac9b31d0b9 ("ASoC: Intel: Add catpt base members")
Signed-off-by: Cezary Rojewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/catpt/dsp.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/catpt/dsp.c b/sound/soc/intel/catpt/dsp.c
index 9c5fd18f2600f..346bec0003066 100644
--- a/sound/soc/intel/catpt/dsp.c
+++ b/sound/soc/intel/catpt/dsp.c
@@ -65,6 +65,7 @@ static int catpt_dma_memcpy(struct catpt_dev *cdev, struct dma_chan *chan,
{
struct dma_async_tx_descriptor *desc;
enum dma_status status;
+ int ret;
desc = dmaengine_prep_dma_memcpy(chan, dst_addr, src_addr, size,
DMA_CTRL_ACK);
@@ -77,13 +78,22 @@ static int catpt_dma_memcpy(struct catpt_dev *cdev, struct dma_chan *chan,
catpt_updatel_shim(cdev, HMDC,
CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id),
CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id));
- dmaengine_submit(desc);
+
+ ret = dma_submit_error(dmaengine_submit(desc));
+ if (ret) {
+ dev_err(cdev->dev, "submit tx failed: %d\n", ret);
+ goto clear_hdda;
+ }
+
status = dma_wait_for_async_tx(desc);
+ ret = (status == DMA_COMPLETE) ? 0 : -EPROTO;
+
+clear_hdda:
/* regardless of status, disable access to HOST memory in demand mode */
catpt_updatel_shim(cdev, HMDC,
CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id), 0);
- return (status == DMA_COMPLETE) ? 0 : -EPROTO;
+ return ret;
}
int catpt_dma_memcpy_todsp(struct catpt_dev *cdev, struct dma_chan *chan,
--
2.34.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 134c37fa250a87a7e77c80a7c59ae16c462e46e0 ]
The last driver referencing the slave_id on Marvell PXA and MMP platforms
was the SPI driver, but this stopped doing so a long time ago, so the
TODO from the earlier patch can no be removed.
Fixes: b729bf34535e ("spi/pxa2xx: Don't use slave_id of dma_slave_config")
Fixes: 13b3006b8ebd ("dma: mmp_pdma: add filter function")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/mmp_pdma.c | 6 ------
drivers/dma/pxa_dma.c | 7 -------
2 files changed, 13 deletions(-)
diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index 89f1814ff27a0..26d11885c50ec 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -727,12 +727,6 @@ static int mmp_pdma_config_write(struct dma_chan *dchan,
chan->dir = direction;
chan->dev_addr = addr;
- /* FIXME: drivers should be ported over to use the filter
- * function. Once that's done, the following two lines can
- * be removed.
- */
- if (cfg->slave_id)
- chan->drcmr = cfg->slave_id;
return 0;
}
diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 4a2a796e348c1..aa6e552249ab9 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -910,13 +910,6 @@ static void pxad_get_config(struct pxad_chan *chan,
*dcmd |= PXA_DCMD_BURST16;
else if (maxburst == 32)
*dcmd |= PXA_DCMD_BURST32;
-
- /* FIXME: drivers should be ported over to use the filter
- * function. Once that's done, the following two lines can
- * be removed.
- */
- if (chan->cfg.slave_id)
- chan->drcmr = chan->cfg.slave_id;
}
static struct dma_async_tx_descriptor *
--
2.34.1
From: Maxim Levitsky <[email protected]>
[ Upstream commit a8d4a37d1bb93608501d0d0545f902061152669a ]
This will give IOMMU GA log a chance to work after resume
from s3/s4.
Fixes: 8bda0cfbdc1a6 ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Maxim Levitsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/init.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 2a822b229bd05..9b12a2f7548ac 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -804,16 +804,27 @@ static int iommu_ga_log_enable(struct amd_iommu *iommu)
{
#ifdef CONFIG_IRQ_REMAP
u32 status, i;
+ u64 entry;
if (!iommu->ga_log)
return -EINVAL;
- status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
-
/* Check if already running */
- if (status & (MMIO_STATUS_GALOG_RUN_MASK))
+ status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+ if (WARN_ON(status & (MMIO_STATUS_GALOG_RUN_MASK)))
return 0;
+ entry = iommu_virt_to_phys(iommu->ga_log) | GA_LOG_SIZE_512;
+ memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_BASE_OFFSET,
+ &entry, sizeof(entry));
+ entry = (iommu_virt_to_phys(iommu->ga_log_tail) &
+ (BIT_ULL(52)-1)) & ~7ULL;
+ memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_TAIL_OFFSET,
+ &entry, sizeof(entry));
+ writel(0x00, iommu->mmio_base + MMIO_GA_HEAD_OFFSET);
+ writel(0x00, iommu->mmio_base + MMIO_GA_TAIL_OFFSET);
+
+
iommu_feature_enable(iommu, CONTROL_GAINT_EN);
iommu_feature_enable(iommu, CONTROL_GALOG_EN);
@@ -823,7 +834,7 @@ static int iommu_ga_log_enable(struct amd_iommu *iommu)
break;
}
- if (i >= LOOP_TIMEOUT)
+ if (WARN_ON(i >= LOOP_TIMEOUT))
return -EINVAL;
#endif /* CONFIG_IRQ_REMAP */
return 0;
@@ -832,8 +843,6 @@ static int iommu_ga_log_enable(struct amd_iommu *iommu)
static int iommu_init_ga_log(struct amd_iommu *iommu)
{
#ifdef CONFIG_IRQ_REMAP
- u64 entry;
-
if (!AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir))
return 0;
@@ -847,16 +856,6 @@ static int iommu_init_ga_log(struct amd_iommu *iommu)
if (!iommu->ga_log_tail)
goto err_out;
- entry = iommu_virt_to_phys(iommu->ga_log) | GA_LOG_SIZE_512;
- memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_BASE_OFFSET,
- &entry, sizeof(entry));
- entry = (iommu_virt_to_phys(iommu->ga_log_tail) &
- (BIT_ULL(52)-1)) & ~7ULL;
- memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_TAIL_OFFSET,
- &entry, sizeof(entry));
- writel(0x00, iommu->mmio_base + MMIO_GA_HEAD_OFFSET);
- writel(0x00, iommu->mmio_base + MMIO_GA_TAIL_OFFSET);
-
return 0;
err_out:
free_ga_log(iommu);
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit a670c82d9ca4f1e7385d9d6f26ff41a50fbdd944 ]
Commit d4a451d5fc84 ("arch: remove the ARCH_PHYS_ADDR_T_64BIT config
symbol") removes config ARCH_PHYS_ADDR_T_64BIT with all instances of that
config refactored appropriately. Since then, it is recommended to use the
config PHYS_ADDR_T_64BIT instead.
Commit 171543e75272 ("MIPS: Disallow CPU_SUPPORTS_HUGEPAGES for XPA,EVA")
introduces the expression "!(32BIT && (ARCH_PHYS_ADDR_T_64BIT || EVA))"
for config CPU_SUPPORTS_HUGEPAGES, which unintentionally refers to the
non-existing symbol ARCH_PHYS_ADDR_T_64BIT instead of the intended
PHYS_ADDR_T_64BIT.
Fix this Kconfig reference to the intended PHYS_ADDR_T_64BIT.
This issue was identified with the script ./scripts/checkkconfigsymbols.py.
I then reported it on the mailing list and Paul confirmed the mistake in
the linked email thread.
Link: https://lore.kernel.org/lkml/[email protected]/
Suggested-by: Paul Cercueil <[email protected]>
Fixes: 171543e75272 ("MIPS: Disallow CPU_SUPPORTS_HUGEPAGES for XPA,EVA")
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0200ebb7a0144..393eb2133243f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2161,7 +2161,7 @@ config CPU_SUPPORTS_ADDRWINCFG
bool
config CPU_SUPPORTS_HUGEPAGES
bool
- depends on !(32BIT && (ARCH_PHYS_ADDR_T_64BIT || EVA))
+ depends on !(32BIT && (PHYS_ADDR_T_64BIT || EVA))
config MIPS_PGD_C0_CONTEXT
bool
depends on 64BIT
--
2.34.1
From: Alyssa Ross <[email protected]>
[ Upstream commit 9f3d45318dd9e739ed62e4218839a7a824d3cced ]
modprobe can't handle spaces in aliases.
Fixes: 9e28f6532c61 ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Alyssa Ross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl_mqs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/fsl/fsl_mqs.c b/sound/soc/fsl/fsl_mqs.c
index 69aeb0e71844d..0d4efbed41dab 100644
--- a/sound/soc/fsl/fsl_mqs.c
+++ b/sound/soc/fsl/fsl_mqs.c
@@ -337,4 +337,4 @@ module_platform_driver(fsl_mqs_driver);
MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
MODULE_DESCRIPTION("MQS codec driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform: fsl-mqs");
+MODULE_ALIAS("platform:fsl-mqs");
--
2.34.1
From: Lu Baolu <[email protected]>
[ Upstream commit 556f99ac886635e8da15528995f06d1d7028cfca ]
Extend the scope of holding group->mutex so that it can cover the default
domain check/attachment and direct mappings of reserved regions.
Cc: Ashish Mhetre <[email protected]>
Fixes: 211ff31b3d33b ("iommu: Fix race condition during default domain allocation")
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/iommu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 3303d707bab4b..f62fb6a58f109 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -287,11 +287,11 @@ int iommu_probe_device(struct device *dev)
*/
mutex_lock(&group->mutex);
iommu_alloc_default_domain(group, dev);
- mutex_unlock(&group->mutex);
if (group->default_domain) {
ret = __iommu_attach_device(group->default_domain, dev);
if (ret) {
+ mutex_unlock(&group->mutex);
iommu_group_put(group);
goto err_release;
}
@@ -299,6 +299,7 @@ int iommu_probe_device(struct device *dev)
iommu_create_device_direct_mappings(group, dev);
+ mutex_unlock(&group->mutex);
iommu_group_put(group);
if (ops->probe_finalize)
--
2.34.1
From: Bart Van Assche <[email protected]>
[ Upstream commit 4bc3bffc1a885eb5cb259e4a25146a4c7b1034e3 ]
The comment above scsi_device_max_queue_depth() and also the description of
commit ca4453213951 ("scsi: core: Make sure sdev->queue_depth is <=
max(shost->can_queue, 1024)") contradict the implementation of the function
scsi_device_max_queue_depth(). Additionally, the maximum queue depth of a
SCSI LUN never exceeds host->can_queue. Fix scsi_device_max_queue_depth()
by changing max_t() into min_t().
Link: https://lore.kernel.org/r/[email protected]
Fixes: ca4453213951 ("scsi: core: Make sure sdev->queue_depth is <= max(shost->can_queue, 1024)")
Cc: Hannes Reinecke <[email protected]>
Cc: Sumanesh Samanta <[email protected]>
Tested-by: Bean Huo <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 291ecc33b1fe6..4fc9466d820a7 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -209,11 +209,11 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
/*
- * 1024 is big enough for saturating the fast scsi LUN now
+ * 1024 is big enough for saturating fast SCSI LUNs.
*/
int scsi_device_max_queue_depth(struct scsi_device *sdev)
{
- return max_t(int, sdev->host->can_queue, 1024);
+ return min_t(int, sdev->host->can_queue, 1024);
}
/**
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit eec91694f927d1026974444eb6a3adccd4f1cbc2 ]
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/uio/uio_dmem_genirq.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
index 6b5cfa5b06733..1106f33764047 100644
--- a/drivers/uio/uio_dmem_genirq.c
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -188,7 +188,11 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
return -ENOMEM;
}
- dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "DMA enable failed\n");
+ return ret;
+ }
priv->uioinfo = uioinfo;
spin_lock_init(&priv->lock);
--
2.34.1
From: Hector Martin <[email protected]>
[ Upstream commit 9abe2ac834851a7d0b0756e295cf7a292c45ca53 ]
Table descriptors were being installed without properly formatting the
address using paddr_to_iopte, which does not match up with the
iopte_deref in __arm_lpae_map. This is incorrect for the LPAE pte
format, as it does not handle the high bits properly.
This was found on Apple T6000 DARTs, which require a new pte format
(different shift); adding support for that to
paddr_to_iopte/iopte_to_paddr caused it to break badly, as even <48-bit
addresses would end up incorrect in that case.
Fixes: 6c89928ff7a0 ("iommu/io-pgtable-arm: Support 52-bit physical address")
Acked-by: Robin Murphy <[email protected]>
Signed-off-by: Hector Martin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/io-pgtable-arm.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index dd9e47189d0d9..94ff319ae8acc 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -315,11 +315,12 @@ static int arm_lpae_init_pte(struct arm_lpae_io_pgtable *data,
static arm_lpae_iopte arm_lpae_install_table(arm_lpae_iopte *table,
arm_lpae_iopte *ptep,
arm_lpae_iopte curr,
- struct io_pgtable_cfg *cfg)
+ struct arm_lpae_io_pgtable *data)
{
arm_lpae_iopte old, new;
+ struct io_pgtable_cfg *cfg = &data->iop.cfg;
- new = __pa(table) | ARM_LPAE_PTE_TYPE_TABLE;
+ new = paddr_to_iopte(__pa(table), data) | ARM_LPAE_PTE_TYPE_TABLE;
if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
new |= ARM_LPAE_PTE_NSTABLE;
@@ -380,7 +381,7 @@ static int __arm_lpae_map(struct arm_lpae_io_pgtable *data, unsigned long iova,
if (!cptep)
return -ENOMEM;
- pte = arm_lpae_install_table(cptep, ptep, 0, cfg);
+ pte = arm_lpae_install_table(cptep, ptep, 0, data);
if (pte)
__arm_lpae_free_pages(cptep, tblsz, cfg);
} else if (!cfg->coherent_walk && !(pte & ARM_LPAE_PTE_SW_SYNC)) {
@@ -592,7 +593,7 @@ static size_t arm_lpae_split_blk_unmap(struct arm_lpae_io_pgtable *data,
__arm_lpae_init_pte(data, blk_paddr, pte, lvl, 1, &tablep[i]);
}
- pte = arm_lpae_install_table(tablep, ptep, blk_pte, cfg);
+ pte = arm_lpae_install_table(tablep, ptep, blk_pte, data);
if (pte != blk_pte) {
__arm_lpae_free_pages(tablep, tablesz, cfg);
/*
--
2.34.1
From: Frank Rowand <[email protected]>
[ Upstream commit 9fd4cf5d3571b27d746b8ead494a3f051485b679 ]
If an architecture does not support 64 bit dma addresses then testing
for an expected dma address >= 0x100000000 will fail.
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Frank Rowand <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/unittest.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 242381568f13c..2bee1d992408f 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -942,8 +942,9 @@ static void __init of_unittest_parse_dma_ranges(void)
{
of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000",
0x0, 0x20000000);
- of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000",
- 0x100000000, 0x20000000);
+ if (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT))
+ of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000",
+ 0x100000000, 0x20000000);
of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000",
0x80000000, 0x20000000);
}
--
2.34.1
From: Stafford Horne <[email protected]>
[ Upstream commit 433fe39f674d58bc7a3e8254a5d2ffc290b7e04e ]
Like fork and clone the clone3 syscall needs a wrapper to save callee
saved registers, which is required by the OpenRISC ABI. This came up
after auditing code following a discussion with Rob Landley and Arnd
Bergmann [0].
Tested with the clone3 kselftests and there were no issues.
[0] https://lore.kernel.org/all/[email protected]/T/#m9c0cdb2703813b9df4da04cf6b30de1f1aa89944
Fixes: 07e83dfbe16c ("openrisc: Enable the clone3 syscall")
Cc: Rob Landley <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/openrisc/include/asm/syscalls.h | 2 ++
arch/openrisc/kernel/entry.S | 5 +++++
2 files changed, 7 insertions(+)
diff --git a/arch/openrisc/include/asm/syscalls.h b/arch/openrisc/include/asm/syscalls.h
index 3a7eeae6f56a8..aa1c7e98722e3 100644
--- a/arch/openrisc/include/asm/syscalls.h
+++ b/arch/openrisc/include/asm/syscalls.h
@@ -22,9 +22,11 @@ asmlinkage long sys_or1k_atomic(unsigned long type, unsigned long *v1,
asmlinkage long __sys_clone(unsigned long clone_flags, unsigned long newsp,
void __user *parent_tid, void __user *child_tid, int tls);
+asmlinkage long __sys_clone3(struct clone_args __user *uargs, size_t size);
asmlinkage long __sys_fork(void);
#define sys_clone __sys_clone
+#define sys_clone3 __sys_clone3
#define sys_fork __sys_fork
#endif /* __ASM_OPENRISC_SYSCALLS_H */
diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S
index edaa775a648e6..c68f3349c1741 100644
--- a/arch/openrisc/kernel/entry.S
+++ b/arch/openrisc/kernel/entry.S
@@ -1170,6 +1170,11 @@ ENTRY(__sys_clone)
l.j _fork_save_extra_regs_and_call
l.nop
+ENTRY(__sys_clone3)
+ l.movhi r29,hi(sys_clone3)
+ l.j _fork_save_extra_regs_and_call
+ l.ori r29,r29,lo(sys_clone3)
+
ENTRY(__sys_fork)
l.movhi r29,hi(sys_fork)
l.ori r29,r29,lo(sys_fork)
--
2.34.1
From: Zhen Lei <[email protected]>
[ Upstream commit 8347b41748c3019157312fbe7f8a6792ae396eb7 ]
Currently, we parse the "linux,usable-memory-range" property in
early_init_dt_scan_chosen(), to obtain the specified memory range of the
crash kernel. We then reserve the required memory after
early_init_dt_scan_memory() has identified all available physical memory.
Because the two pieces of code are separated far, the readability and
maintainability are reduced. So bring them together.
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
(change the prototype of early_init_dt_check_for_usable_mem_range(), in
order to use it outside)
Signed-off-by: Pingfan Liu <[email protected]>
Tested-by: Dave Kleikamp <[email protected]>
Acked-by: John Donnelly <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
To: [email protected]
To: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/fdt.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 4546572af24bb..105b1a47905ab 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -969,18 +969,22 @@ static void __init early_init_dt_check_for_elfcorehdr(unsigned long node)
elfcorehdr_addr, elfcorehdr_size);
}
-static phys_addr_t cap_mem_addr;
-static phys_addr_t cap_mem_size;
+static unsigned long chosen_node_offset = -FDT_ERR_NOTFOUND;
/**
* early_init_dt_check_for_usable_mem_range - Decode usable memory range
* location from flat tree
- * @node: reference to node containing usable memory range location ('chosen')
*/
-static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
+static void __init early_init_dt_check_for_usable_mem_range(void)
{
const __be32 *prop;
int len;
+ phys_addr_t cap_mem_addr;
+ phys_addr_t cap_mem_size;
+ unsigned long node = chosen_node_offset;
+
+ if ((long)node < 0)
+ return;
pr_debug("Looking for usable-memory-range property... ");
@@ -993,6 +997,8 @@ static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
pr_debug("cap_mem_start=%pa cap_mem_size=%pa\n", &cap_mem_addr,
&cap_mem_size);
+
+ memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
}
#ifdef CONFIG_SERIAL_EARLYCON
@@ -1141,9 +1147,10 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
(strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
return 0;
+ chosen_node_offset = node;
+
early_init_dt_check_for_initrd(node);
early_init_dt_check_for_elfcorehdr(node);
- early_init_dt_check_for_usable_mem_range(node);
/* Retrieve command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
@@ -1279,7 +1286,7 @@ void __init early_init_dt_scan_nodes(void)
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
/* Handle linux,usable-memory-range property */
- memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
+ early_init_dt_check_for_usable_mem_range();
}
bool __init early_init_dt_scan(void *params)
--
2.34.1
From: Avihai Horon <[email protected]>
[ Upstream commit 20679094a0161c94faf77e373fa3f7428a8e14bd ]
Currently, when cma_resolve_ib_dev() searches for a matching GID it will
stop searching after encountering the first empty GID table entry. This
behavior is wrong since neither IB nor RoCE spec enforce tightly packed
GID tables.
For example, when the matching valid GID entry exists at index N, and if a
GID entry is empty at index N-1, cma_resolve_ib_dev() will fail to find
the matching valid entry.
Fix it by making cma_resolve_ib_dev() continue searching even after
encountering missing entries.
Fixes: f17df3b0dede ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()")
Link: https://lore.kernel.org/r/b7346307e3bb396c43d67d924348c6c496493991.1639055490.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Mark Zhang <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cma.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 704ce595542c5..88093bbe3da69 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -766,6 +766,7 @@ static int cma_resolve_ib_dev(struct rdma_id_private *id_priv)
unsigned int p;
u16 pkey, index;
enum ib_port_state port_state;
+ int ret;
int i;
cma_dev = NULL;
@@ -784,9 +785,14 @@ static int cma_resolve_ib_dev(struct rdma_id_private *id_priv)
if (ib_get_cached_port_state(cur_dev->device, p, &port_state))
continue;
- for (i = 0; !rdma_query_gid(cur_dev->device,
- p, i, &gid);
- i++) {
+
+ for (i = 0; i < cur_dev->device->port_data[p].immutable.gid_tbl_len;
+ ++i) {
+ ret = rdma_query_gid(cur_dev->device, p, i,
+ &gid);
+ if (ret)
+ continue;
+
if (!memcmp(&gid, dgid, sizeof(gid))) {
cma_dev = cur_dev;
sgid = gid;
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit b149d5d45ac9171ed699a256f026c8ebef901112 ]
Commit df1f679d19ed ("powerpc/powermac: Add missing
lockdep_register_key()") fixed a problem that was causing a WARNING.
There are two other places in the same file with the same problem
originating from commit 9e607f72748d ("i2c_powermac: shut up lockdep
warning").
Add missing lockdep_register_key()
Fixes: 9e607f72748d ("i2c_powermac: shut up lockdep warning")
Reported-by: Erhard Furtner <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Depends-on: df1f679d19ed ("powerpc/powermac: Add missing lockdep_register_key()")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200055
Link: https://lore.kernel.org/r/2c7e421874e21b2fb87813d768cf662f630c2ad4.1638984999.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/powermac/low_i2c.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index f77a59b5c2e1a..09bfe4b8f25aa 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -810,6 +810,7 @@ static void __init pmu_i2c_probe(void)
bus->hostdata = bus + 1;
bus->xfer = pmu_i2c_xfer;
mutex_init(&bus->mutex);
+ lockdep_register_key(&bus->lock_key);
lockdep_set_class(&bus->mutex, &bus->lock_key);
bus->flags = pmac_i2c_multibus;
list_add(&bus->link, &pmac_i2c_busses);
@@ -933,6 +934,7 @@ static void __init smu_i2c_probe(void)
bus->hostdata = bus + 1;
bus->xfer = smu_i2c_xfer;
mutex_init(&bus->mutex);
+ lockdep_register_key(&bus->lock_key);
lockdep_set_class(&bus->mutex, &bus->lock_key);
bus->flags = 0;
list_add(&bus->link, &pmac_i2c_busses);
--
2.34.1
From: Todd Kjos <[email protected]>
[ Upstream commit 6d98eb95b450a75adb4516a1d33652dc78d2b20c ]
Transactions are copied from the sender to the target
first and objects like BINDER_TYPE_PTR and BINDER_TYPE_FDA
are then fixed up. This means there is a short period where
the sender's version of these objects are visible to the
target prior to the fixups.
Instead of copying all of the data first, copy data only
after any needed fixups have been applied.
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Reviewed-by: Martijn Coenen <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Todd Kjos <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/android/binder.c | 94 ++++++++++++++++++++++++++++++----------
1 file changed, 70 insertions(+), 24 deletions(-)
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 7d29d3d931a79..99ae919255f4d 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1608,15 +1608,21 @@ static void binder_cleanup_transaction(struct binder_transaction *t,
/**
* binder_get_object() - gets object and checks for valid metadata
* @proc: binder_proc owning the buffer
+ * @u: sender's user pointer to base of buffer
* @buffer: binder_buffer that we're parsing.
* @offset: offset in the @buffer at which to validate an object.
* @object: struct binder_object to read into
*
- * Return: If there's a valid metadata object at @offset in @buffer, the
+ * Copy the binder object at the given offset into @object. If @u is
+ * provided then the copy is from the sender's buffer. If not, then
+ * it is copied from the target's @buffer.
+ *
+ * Return: If there's a valid metadata object at @offset, the
* size of that object. Otherwise, it returns zero. The object
* is read into the struct binder_object pointed to by @object.
*/
static size_t binder_get_object(struct binder_proc *proc,
+ const void __user *u,
struct binder_buffer *buffer,
unsigned long offset,
struct binder_object *object)
@@ -1626,10 +1632,16 @@ static size_t binder_get_object(struct binder_proc *proc,
size_t object_size = 0;
read_size = min_t(size_t, sizeof(*object), buffer->data_size - offset);
- if (offset > buffer->data_size || read_size < sizeof(*hdr) ||
- binder_alloc_copy_from_buffer(&proc->alloc, object, buffer,
- offset, read_size))
+ if (offset > buffer->data_size || read_size < sizeof(*hdr))
return 0;
+ if (u) {
+ if (copy_from_user(object, u + offset, read_size))
+ return 0;
+ } else {
+ if (binder_alloc_copy_from_buffer(&proc->alloc, object, buffer,
+ offset, read_size))
+ return 0;
+ }
/* Ok, now see if we read a complete object. */
hdr = &object->hdr;
@@ -1702,7 +1714,7 @@ static struct binder_buffer_object *binder_validate_ptr(
b, buffer_offset,
sizeof(object_offset)))
return NULL;
- object_size = binder_get_object(proc, b, object_offset, object);
+ object_size = binder_get_object(proc, NULL, b, object_offset, object);
if (!object_size || object->hdr.type != BINDER_TYPE_PTR)
return NULL;
if (object_offsetp)
@@ -1767,7 +1779,8 @@ static bool binder_validate_fixup(struct binder_proc *proc,
unsigned long buffer_offset;
struct binder_object last_object;
struct binder_buffer_object *last_bbo;
- size_t object_size = binder_get_object(proc, b, last_obj_offset,
+ size_t object_size = binder_get_object(proc, NULL, b,
+ last_obj_offset,
&last_object);
if (object_size != sizeof(*last_bbo))
return false;
@@ -1882,7 +1895,7 @@ static void binder_transaction_buffer_release(struct binder_proc *proc,
if (!binder_alloc_copy_from_buffer(&proc->alloc, &object_offset,
buffer, buffer_offset,
sizeof(object_offset)))
- object_size = binder_get_object(proc, buffer,
+ object_size = binder_get_object(proc, NULL, buffer,
object_offset, &object);
if (object_size == 0) {
pr_err("transaction release %d bad object at offset %lld, size %zd\n",
@@ -2455,6 +2468,7 @@ static void binder_transaction(struct binder_proc *proc,
binder_size_t off_start_offset, off_end_offset;
binder_size_t off_min;
binder_size_t sg_buf_offset, sg_buf_end_offset;
+ binder_size_t user_offset = 0;
struct binder_proc *target_proc = NULL;
struct binder_thread *target_thread = NULL;
struct binder_node *target_node = NULL;
@@ -2469,6 +2483,8 @@ static void binder_transaction(struct binder_proc *proc,
int t_debug_id = atomic_inc_return(&binder_last_id);
char *secctx = NULL;
u32 secctx_sz = 0;
+ const void __user *user_buffer = (const void __user *)
+ (uintptr_t)tr->data.ptr.buffer;
e = binder_transaction_log_add(&binder_transaction_log);
e->debug_id = t_debug_id;
@@ -2780,19 +2796,6 @@ static void binder_transaction(struct binder_proc *proc,
t->buffer->clear_on_free = !!(t->flags & TF_CLEAR_BUF);
trace_binder_transaction_alloc_buf(t->buffer);
- if (binder_alloc_copy_user_to_buffer(
- &target_proc->alloc,
- t->buffer, 0,
- (const void __user *)
- (uintptr_t)tr->data.ptr.buffer,
- tr->data_size)) {
- binder_user_error("%d:%d got transaction with invalid data ptr\n",
- proc->pid, thread->pid);
- return_error = BR_FAILED_REPLY;
- return_error_param = -EFAULT;
- return_error_line = __LINE__;
- goto err_copy_data_failed;
- }
if (binder_alloc_copy_user_to_buffer(
&target_proc->alloc,
t->buffer,
@@ -2837,6 +2840,7 @@ static void binder_transaction(struct binder_proc *proc,
size_t object_size;
struct binder_object object;
binder_size_t object_offset;
+ binder_size_t copy_size;
if (binder_alloc_copy_from_buffer(&target_proc->alloc,
&object_offset,
@@ -2848,8 +2852,27 @@ static void binder_transaction(struct binder_proc *proc,
return_error_line = __LINE__;
goto err_bad_offset;
}
- object_size = binder_get_object(target_proc, t->buffer,
- object_offset, &object);
+
+ /*
+ * Copy the source user buffer up to the next object
+ * that will be processed.
+ */
+ copy_size = object_offset - user_offset;
+ if (copy_size && (user_offset > object_offset ||
+ binder_alloc_copy_user_to_buffer(
+ &target_proc->alloc,
+ t->buffer, user_offset,
+ user_buffer + user_offset,
+ copy_size))) {
+ binder_user_error("%d:%d got transaction with invalid data ptr\n",
+ proc->pid, thread->pid);
+ return_error = BR_FAILED_REPLY;
+ return_error_param = -EFAULT;
+ return_error_line = __LINE__;
+ goto err_copy_data_failed;
+ }
+ object_size = binder_get_object(target_proc, user_buffer,
+ t->buffer, object_offset, &object);
if (object_size == 0 || object_offset < off_min) {
binder_user_error("%d:%d got transaction with invalid offset (%lld, min %lld max %lld) or object.\n",
proc->pid, thread->pid,
@@ -2861,6 +2884,11 @@ static void binder_transaction(struct binder_proc *proc,
return_error_line = __LINE__;
goto err_bad_offset;
}
+ /*
+ * Set offset to the next buffer fragment to be
+ * copied
+ */
+ user_offset = object_offset + object_size;
hdr = &object.hdr;
off_min = object_offset + object_size;
@@ -2956,9 +2984,14 @@ static void binder_transaction(struct binder_proc *proc,
}
ret = binder_translate_fd_array(fda, parent, t, thread,
in_reply_to);
- if (ret < 0) {
+ if (!ret)
+ ret = binder_alloc_copy_to_buffer(&target_proc->alloc,
+ t->buffer,
+ object_offset,
+ fda, sizeof(*fda));
+ if (ret) {
return_error = BR_FAILED_REPLY;
- return_error_param = ret;
+ return_error_param = ret > 0 ? -EINVAL : ret;
return_error_line = __LINE__;
goto err_translate_failed;
}
@@ -3028,6 +3061,19 @@ static void binder_transaction(struct binder_proc *proc,
goto err_bad_object_type;
}
}
+ /* Done processing objects, copy the rest of the buffer */
+ if (binder_alloc_copy_user_to_buffer(
+ &target_proc->alloc,
+ t->buffer, user_offset,
+ user_buffer + user_offset,
+ tr->data_size - user_offset)) {
+ binder_user_error("%d:%d got transaction with invalid data ptr\n",
+ proc->pid, thread->pid);
+ return_error = BR_FAILED_REPLY;
+ return_error_param = -EFAULT;
+ return_error_line = __LINE__;
+ goto err_copy_data_failed;
+ }
if (t->buffer->oneway_spam_suspect)
tcomplete->type = BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT;
else
--
2.34.1
From: Rob Clark <[email protected]>
[ Upstream commit c31112fbd4077a51a14ff338038c82e9571dc821 ]
It is a 64b register, lets not lose the upper bits.
Fixes: ab5df7b953d8 ("iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info")
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 55690af1b25d0..c998960495b4e 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -51,7 +51,7 @@ static void qcom_adreno_smmu_get_fault_info(const void *cookie,
info->fsynr1 = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_FSYNR1);
info->far = arm_smmu_cb_readq(smmu, cfg->cbndx, ARM_SMMU_CB_FAR);
info->cbfrsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
- info->ttbr0 = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_TTBR0);
+ info->ttbr0 = arm_smmu_cb_readq(smmu, cfg->cbndx, ARM_SMMU_CB_TTBR0);
info->contextidr = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_CONTEXTIDR);
}
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 62554d52e71797eefa3fc15b54008038837bb2d4 ]
.BTF and .BTF.ext ELF sections should have SHT_PROGBITS type and contain
data. If they are not, ELF is invalid or corrupted, so bail out.
Otherwise this can lead to data->d_buf being NULL and SIGSEGV later on.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/libbpf.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 0ad29203cbfbf..b7d278b8f4527 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3035,8 +3035,12 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
} else if (strcmp(name, MAPS_ELF_SEC) == 0) {
obj->efile.btf_maps_shndx = idx;
} else if (strcmp(name, BTF_ELF_SEC) == 0) {
+ if (sh->sh_type != SHT_PROGBITS)
+ return -LIBBPF_ERRNO__FORMAT;
btf_data = data;
} else if (strcmp(name, BTF_EXT_ELF_SEC) == 0) {
+ if (sh->sh_type != SHT_PROGBITS)
+ return -LIBBPF_ERRNO__FORMAT;
btf_ext_data = data;
} else if (sh.sh_type == SHT_SYMTAB) {
/* already processed during the first pass above */
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e ]
Yes, you are right and now the return code depending on the
init_clks().
Fixes: 6078c651947a ("soc: mediatek: Refine scpsys to support multiple platform")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/mediatek/mtk-scpsys.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index ca75b14931ec9..670cc82d17dc2 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -411,12 +411,17 @@ out:
return ret;
}
-static void init_clks(struct platform_device *pdev, struct clk **clk)
+static int init_clks(struct platform_device *pdev, struct clk **clk)
{
int i;
- for (i = CLK_NONE + 1; i < CLK_MAX; i++)
+ for (i = CLK_NONE + 1; i < CLK_MAX; i++) {
clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
+ if (IS_ERR(clk[i]))
+ return PTR_ERR(clk[i]);
+ }
+
+ return 0;
}
static struct scp *init_scp(struct platform_device *pdev,
@@ -426,7 +431,7 @@ static struct scp *init_scp(struct platform_device *pdev,
{
struct genpd_onecell_data *pd_data;
struct resource *res;
- int i, j;
+ int i, j, ret;
struct scp *scp;
struct clk *clk[CLK_MAX];
@@ -481,7 +486,9 @@ static struct scp *init_scp(struct platform_device *pdev,
pd_data->num_domains = num;
- init_clks(pdev, clk);
+ ret = init_clks(pdev, clk);
+ if (ret)
+ return ERR_PTR(ret);
for (i = 0; i < num; i++) {
struct scp_domain *scpd = &scp->domains[i];
--
2.34.1
From: Merlijn Wajer <[email protected]>
[ Upstream commit 9e87a8da747bf72365abb79e6f64fcca955b4f56 ]
Commit a5d3d1adc95f ("leds: lp55xx: Initialize enable GPIO direction to
output") attempts to fix this, but the fix did not work since at least
for the Nokia N900 the value needs to be set to HIGH, per the device
tree. So rather than hardcoding the value to a potentially invalid value
for some devices, let's set direction in lp55xx_init_device.
Fixes: a5d3d1adc95f ("leds: lp55xx: Initialize enable GPIO direction to output")
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Pavel Machek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/leds/leds-lp55xx-common.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index d1657c46ee2f8..9fdfc1b9a1a0c 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -439,6 +439,8 @@ int lp55xx_init_device(struct lp55xx_chip *chip)
return -EINVAL;
if (pdata->enable_gpiod) {
+ gpiod_direction_output(pdata->enable_gpiod, 0);
+
gpiod_set_consumer_name(pdata->enable_gpiod, "LP55xx enable");
gpiod_set_value(pdata->enable_gpiod, 0);
usleep_range(1000, 2000); /* Keep enable down at least 1ms */
@@ -694,7 +696,7 @@ struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev,
of_property_read_u8(np, "clock-mode", &pdata->clock_mode);
pdata->enable_gpiod = devm_gpiod_get_optional(dev, "enable",
- GPIOD_OUT_LOW);
+ GPIOD_ASIS);
if (IS_ERR(pdata->enable_gpiod))
return ERR_CAST(pdata->enable_gpiod);
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 8c7a95520184b6677ca6075e12df9c208d57d088 ]
skb_ctx selftest didn't close bpf_object implicitly allocated by
bpf_prog_test_load() helper. Fix the problem by explicitly calling
bpf_object__close() at the end of the test.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Hengqi Chen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/skb_ctx.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
index fafeddaad6a99..23915be6172d6 100644
--- a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
+++ b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
@@ -105,4 +105,6 @@ void test_skb_ctx(void)
"ctx_out_mark",
"skb->mark == %u, expected %d\n",
skb.mark, 10);
+
+ bpf_object__close(obj);
}
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit bc30c3b0c8a1904d83d5f0d60fb8650a334b207b ]
The Lenovo Yoga Book X91F/L uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.
Cc: Yauhen Kharuzhy <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Simon Ser <[email protected]>
Tested-by: Yauhen Kharuzhy <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index a950d5db211c5..9d1bd8f491ad7 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -248,6 +248,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGM"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
+ }, { /* Lenovo Yoga Book X90F / X91F / X91L */
+ .matches = {
+ /* Non exact match to match all versions */
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
+ },
+ .driver_data = (void *)&lcd1200x1920_rightside_up,
}, { /* OneGX1 Pro */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SYSTEM_MANUFACTURER"),
--
2.34.1
From: Brian Chen <[email protected]>
[ Upstream commit cb0e52b7748737b2cf6481fdd9b920ce7e1ebbdf ]
We've noticed cases where tasks in a cgroup are stalled on memory but
there is little memory FULL pressure since tasks stay on the runqueue
in reclaim.
A simple example involves a single threaded program that keeps leaking
and touching large amounts of memory. It runs in a cgroup with swap
enabled, memory.high set at 10M and cpu.max ratio set at 5%. Though
there is significant CPU pressure and memory SOME, there is barely any
memory FULL since the task enters reclaim and stays on the runqueue.
However, this memory-bound task is effectively stalled on memory and
we expect memory FULL to match memory SOME in this scenario.
The code is confused about memstall && running, thinking there is a
stalled task and a productive task when there's only one task: a
reclaimer that's counted as both. To fix this, we redefine the
condition for PSI_MEM_FULL to check that all running tasks are in an
active memstall instead of checking that there are no running tasks.
case PSI_MEM_FULL:
- return unlikely(tasks[NR_MEMSTALL] && !tasks[NR_RUNNING]);
+ return unlikely(tasks[NR_MEMSTALL] &&
+ tasks[NR_RUNNING] == tasks[NR_MEMSTALL_RUNNING]);
This will capture reclaimers. It will also capture tasks that called
psi_memstall_enter() and are about to sleep, but this should be
negligible noise.
Signed-off-by: Brian Chen <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/psi_types.h | 13 ++++++++++-
kernel/sched/psi.c | 45 ++++++++++++++++++++++++---------------
kernel/sched/stats.h | 5 ++++-
3 files changed, 44 insertions(+), 19 deletions(-)
diff --git a/include/linux/psi_types.h b/include/linux/psi_types.h
index 0a23300d49af7..0819c82dba920 100644
--- a/include/linux/psi_types.h
+++ b/include/linux/psi_types.h
@@ -21,7 +21,17 @@ enum psi_task_count {
* don't have to special case any state tracking for it.
*/
NR_ONCPU,
- NR_PSI_TASK_COUNTS = 4,
+ /*
+ * For IO and CPU stalls the presence of running/oncpu tasks
+ * in the domain means a partial rather than a full stall.
+ * For memory it's not so simple because of page reclaimers:
+ * they are running/oncpu while representing a stall. To tell
+ * whether a domain has productivity left or not, we need to
+ * distinguish between regular running (i.e. productive)
+ * threads and memstall ones.
+ */
+ NR_MEMSTALL_RUNNING,
+ NR_PSI_TASK_COUNTS = 5,
};
/* Task state bitmasks */
@@ -29,6 +39,7 @@ enum psi_task_count {
#define TSK_MEMSTALL (1 << NR_MEMSTALL)
#define TSK_RUNNING (1 << NR_RUNNING)
#define TSK_ONCPU (1 << NR_ONCPU)
+#define TSK_MEMSTALL_RUNNING (1 << NR_MEMSTALL_RUNNING)
/* Resources that workloads could be stalled on */
enum psi_res {
diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c
index 1652f2bb54b79..69b19d3af690f 100644
--- a/kernel/sched/psi.c
+++ b/kernel/sched/psi.c
@@ -34,13 +34,19 @@
* delayed on that resource such that nobody is advancing and the CPU
* goes idle. This leaves both workload and CPU unproductive.
*
- * Naturally, the FULL state doesn't exist for the CPU resource at the
- * system level, but exist at the cgroup level, means all non-idle tasks
- * in a cgroup are delayed on the CPU resource which used by others outside
- * of the cgroup or throttled by the cgroup cpu.max configuration.
- *
* SOME = nr_delayed_tasks != 0
- * FULL = nr_delayed_tasks != 0 && nr_running_tasks == 0
+ * FULL = nr_delayed_tasks != 0 && nr_productive_tasks == 0
+ *
+ * What it means for a task to be productive is defined differently
+ * for each resource. For IO, productive means a running task. For
+ * memory, productive means a running task that isn't a reclaimer. For
+ * CPU, productive means an oncpu task.
+ *
+ * Naturally, the FULL state doesn't exist for the CPU resource at the
+ * system level, but exist at the cgroup level. At the cgroup level,
+ * FULL means all non-idle tasks in the cgroup are delayed on the CPU
+ * resource which is being used by others outside of the cgroup or
+ * throttled by the cgroup cpu.max configuration.
*
* The percentage of wallclock time spent in those compound stall
* states gives pressure numbers between 0 and 100 for each resource,
@@ -81,13 +87,13 @@
*
* threads = min(nr_nonidle_tasks, nr_cpus)
* SOME = min(nr_delayed_tasks / threads, 1)
- * FULL = (threads - min(nr_running_tasks, threads)) / threads
+ * FULL = (threads - min(nr_productive_tasks, threads)) / threads
*
* For the 257 number crunchers on 256 CPUs, this yields:
*
* threads = min(257, 256)
* SOME = min(1 / 256, 1) = 0.4%
- * FULL = (256 - min(257, 256)) / 256 = 0%
+ * FULL = (256 - min(256, 256)) / 256 = 0%
*
* For the 1 out of 4 memory-delayed tasks, this yields:
*
@@ -112,7 +118,7 @@
* For each runqueue, we track:
*
* tSOME[cpu] = time(nr_delayed_tasks[cpu] != 0)
- * tFULL[cpu] = time(nr_delayed_tasks[cpu] && !nr_running_tasks[cpu])
+ * tFULL[cpu] = time(nr_delayed_tasks[cpu] && !nr_productive_tasks[cpu])
* tNONIDLE[cpu] = time(nr_nonidle_tasks[cpu] != 0)
*
* and then periodically aggregate:
@@ -233,7 +239,8 @@ static bool test_state(unsigned int *tasks, enum psi_states state)
case PSI_MEM_SOME:
return unlikely(tasks[NR_MEMSTALL]);
case PSI_MEM_FULL:
- return unlikely(tasks[NR_MEMSTALL] && !tasks[NR_RUNNING]);
+ return unlikely(tasks[NR_MEMSTALL] &&
+ tasks[NR_RUNNING] == tasks[NR_MEMSTALL_RUNNING]);
case PSI_CPU_SOME:
return unlikely(tasks[NR_RUNNING] > tasks[NR_ONCPU]);
case PSI_CPU_FULL:
@@ -710,10 +717,11 @@ static void psi_group_change(struct psi_group *group, int cpu,
if (groupc->tasks[t]) {
groupc->tasks[t]--;
} else if (!psi_bug) {
- printk_deferred(KERN_ERR "psi: task underflow! cpu=%d t=%d tasks=[%u %u %u %u] clear=%x set=%x\n",
+ printk_deferred(KERN_ERR "psi: task underflow! cpu=%d t=%d tasks=[%u %u %u %u %u] clear=%x set=%x\n",
cpu, t, groupc->tasks[0],
groupc->tasks[1], groupc->tasks[2],
- groupc->tasks[3], clear, set);
+ groupc->tasks[3], groupc->tasks[4],
+ clear, set);
psi_bug = 1;
}
}
@@ -854,12 +862,15 @@ void psi_task_switch(struct task_struct *prev, struct task_struct *next,
int clear = TSK_ONCPU, set = 0;
/*
- * When we're going to sleep, psi_dequeue() lets us handle
- * TSK_RUNNING and TSK_IOWAIT here, where we can combine it
- * with TSK_ONCPU and save walking common ancestors twice.
+ * When we're going to sleep, psi_dequeue() lets us
+ * handle TSK_RUNNING, TSK_MEMSTALL_RUNNING and
+ * TSK_IOWAIT here, where we can combine it with
+ * TSK_ONCPU and save walking common ancestors twice.
*/
if (sleep) {
clear |= TSK_RUNNING;
+ if (prev->in_memstall)
+ clear |= TSK_MEMSTALL_RUNNING;
if (prev->in_iowait)
set |= TSK_IOWAIT;
}
@@ -908,7 +919,7 @@ void psi_memstall_enter(unsigned long *flags)
rq = this_rq_lock_irq(&rf);
current->in_memstall = 1;
- psi_task_change(current, 0, TSK_MEMSTALL);
+ psi_task_change(current, 0, TSK_MEMSTALL | TSK_MEMSTALL_RUNNING);
rq_unlock_irq(rq, &rf);
}
@@ -937,7 +948,7 @@ void psi_memstall_leave(unsigned long *flags)
rq = this_rq_lock_irq(&rf);
current->in_memstall = 0;
- psi_task_change(current, TSK_MEMSTALL, 0);
+ psi_task_change(current, TSK_MEMSTALL | TSK_MEMSTALL_RUNNING, 0);
rq_unlock_irq(rq, &rf);
}
diff --git a/kernel/sched/stats.h b/kernel/sched/stats.h
index d8f8eb0c655ba..606a3982d13a5 100644
--- a/kernel/sched/stats.h
+++ b/kernel/sched/stats.h
@@ -69,6 +69,9 @@ static inline void psi_enqueue(struct task_struct *p, bool wakeup)
if (static_branch_likely(&psi_disabled))
return;
+ if (p->in_memstall)
+ set |= TSK_MEMSTALL_RUNNING;
+
if (!wakeup || p->sched_psi_wake_requeue) {
if (p->in_memstall)
set |= TSK_MEMSTALL;
@@ -99,7 +102,7 @@ static inline void psi_dequeue(struct task_struct *p, bool sleep)
return;
if (p->in_memstall)
- clear |= TSK_MEMSTALL;
+ clear |= (TSK_MEMSTALL | TSK_MEMSTALL_RUNNING);
psi_task_change(p, clear, 0);
}
--
2.34.1
From: Linus Lüssing <[email protected]>
[ Upstream commit 9057d6c23e7388ee9d037fccc9a7bc8557ce277b ]
Currently, creating a batman-adv interface in an unprivileged LXD
container and attaching secondary interfaces to it with "ip" or "batctl"
works fine. However all batctl debug and configuration commands
fail:
root@container:~# batctl originators
Error received: Operation not permitted
root@container:~# batctl orig_interval
1000
root@container:~# batctl orig_interval 2000
root@container:~# batctl orig_interval
1000
To fix this change the generic netlink permissions from GENL_ADMIN_PERM
to GENL_UNS_ADMIN_PERM. This way a batman-adv interface is fully
maintainable as root from within a user namespace, from an unprivileged
container.
All except one batman-adv netlink setting are per interface and do not
leak information or change settings from the host system and are
therefore save to retrieve or modify as root from within an unprivileged
container.
"batctl routing_algo" / BATADV_CMD_GET_ROUTING_ALGOS is the only
exception: It provides the batman-adv kernel module wide default routing
algorithm. However it is read-only from netlink and an unprivileged
container is still not allowed to modify
/sys/module/batman_adv/parameters/routing_algo. Instead it is advised to
use the newly introduced "batctl if create routing_algo RA_NAME" /
IFLA_BATADV_ALGO_NAME to set the routing algorithm on interface
creation, which already works fine in an unprivileged container.
Cc: Tycho Andersen <[email protected]>
Signed-off-by: Linus Lüssing <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/batman-adv/netlink.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 29276284d281c..00875e1d8c44c 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -1368,21 +1368,21 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
{
.cmd = BATADV_CMD_TP_METER,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_tp_meter_start,
.internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_TP_METER_CANCEL,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_tp_meter_cancel,
.internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_GET_ROUTING_ALGOS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_algo_dump,
},
{
@@ -1397,68 +1397,68 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
{
.cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_tt_local_dump,
},
{
.cmd = BATADV_CMD_GET_TRANSTABLE_GLOBAL,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_tt_global_dump,
},
{
.cmd = BATADV_CMD_GET_ORIGINATORS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_orig_dump,
},
{
.cmd = BATADV_CMD_GET_NEIGHBORS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_hardif_neigh_dump,
},
{
.cmd = BATADV_CMD_GET_GATEWAYS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_gw_dump,
},
{
.cmd = BATADV_CMD_GET_BLA_CLAIM,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_bla_claim_dump,
},
{
.cmd = BATADV_CMD_GET_BLA_BACKBONE,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_bla_backbone_dump,
},
{
.cmd = BATADV_CMD_GET_DAT_CACHE,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_dat_cache_dump,
},
{
.cmd = BATADV_CMD_GET_MCAST_FLAGS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_mcast_flags_dump,
},
{
.cmd = BATADV_CMD_SET_MESH,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_set_mesh,
.internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_SET_HARDIF,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_set_hardif,
.internal_flags = BATADV_FLAG_NEED_MESH |
BATADV_FLAG_NEED_HARDIF,
@@ -1474,7 +1474,7 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
{
.cmd = BATADV_CMD_SET_VLAN,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_set_vlan,
.internal_flags = BATADV_FLAG_NEED_MESH |
BATADV_FLAG_NEED_VLAN,
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 58043dbf6d1ae9deab4f5aa1e039c70112017682 ]
The succ var tracks memory allocation erros on this function.
Fix it, in order to stop this W=1 Werror in clang:
drivers/staging/media/atomisp/pci/sh_css_params.c:2430:7: error: variable 'succ' set but not used [-Werror,-Wunused-but-set-variable]
bool succ = true;
^
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/sh_css_params.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_params.c b/drivers/staging/media/atomisp/pci/sh_css_params.c
index dbd3bfe3d343c..ccc0078795648 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_params.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_params.c
@@ -2431,7 +2431,7 @@ sh_css_create_isp_params(struct ia_css_stream *stream,
unsigned int i;
struct sh_css_ddr_address_map *ddr_ptrs;
struct sh_css_ddr_address_map_size *ddr_ptrs_size;
- int err = 0;
+ int err;
size_t params_size;
struct ia_css_isp_parameters *params =
kvmalloc(sizeof(struct ia_css_isp_parameters), GFP_KERNEL);
@@ -2473,7 +2473,11 @@ sh_css_create_isp_params(struct ia_css_stream *stream,
succ &= (ddr_ptrs->macc_tbl != mmgr_NULL);
*isp_params_out = params;
- return err;
+
+ if (!succ)
+ return -ENOMEM;
+
+ return 0;
}
static bool
--
2.34.1
From: Pavankumar Kondeti <[email protected]>
[ Upstream commit c76ef96fc00eb398c8fc836b0eb2f82bcc619dc7 ]
Function fs endpoint file operations are synchronized via an interruptible
mutex wait. However we see threads that do ep file operations concurrently
are getting blocked for the mutex lock in __fdget_pos(). This is an
uninterruptible wait and we see hung task warnings and kernel panic
if hung_task_panic systcl is enabled if host does not send/receive
the data for long time.
The reason for threads getting blocked in __fdget_pos() is due to
the file position protection introduced by the commit 9c225f2655e3
("vfs: atomic f_pos accesses as per POSIX"). Since function fs
endpoint files does not have the notion of the file position, switch
to the stream mode. This will bypass the file position mutex and
threads will be blocked in interruptible state for the function fs
mutex.
It should not affects user space as we are only changing the task state
changes the task state from UNINTERRUPTIBLE to INTERRUPTIBLE while waiting
for the USB transfers to be finished. However there is a slight change to
the O_NONBLOCK behavior. Earlier threads that are using O_NONBLOCK are also
getting blocked inside fdget_pos(). Now they reach to function fs and error
code is returned. The non blocking behavior is actually honoured now.
Reviewed-by: John Keeping <[email protected]>
Signed-off-by: Pavankumar Kondeti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index aac343f7d7d3d..782d67c2c6e0d 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -614,7 +614,7 @@ static int ffs_ep0_open(struct inode *inode, struct file *file)
file->private_data = ffs;
ffs_data_opened(ffs);
- return 0;
+ return stream_open(inode, file);
}
static int ffs_ep0_release(struct inode *inode, struct file *file)
@@ -1154,7 +1154,7 @@ ffs_epfile_open(struct inode *inode, struct file *file)
file->private_data = epfile;
ffs_data_opened(epfile->ffs);
- return 0;
+ return stream_open(inode, file);
}
static int ffs_aio_cancel(struct kiocb *kiocb)
--
2.34.1
From: Brian Norris <[email protected]>
[ Upstream commit 9bf7123bb07f98dc76acb5daa91248e6f95713cb ]
Many DSI panel drivers fail to clean up their panel references on
mipi_dsi_attach() failure, so we're leaving a dangling drm_panel
reference to freed memory. Clean that up on failure.
Noticed by inspection, after seeing similar problems on other drivers.
Therefore, I'm not marking Fixes/stable.
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.3.If9e74fa9b1d6eaa9e0e5b95b2b957b992740251c@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 8 +++++++-
drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 8 +++++++-
drivers/gpu/drm/panel/panel-novatek-nt36672a.c | 8 +++++++-
drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c | 8 +++++++-
drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 8 +++++++-
drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c | 1 +
drivers/gpu/drm/panel/panel-samsung-sofef00.c | 1 +
drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c | 8 +++++++-
8 files changed, 44 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
index 581661b506f81..f9c1f7bc8218c 100644
--- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
+++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
@@ -227,7 +227,13 @@ static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->lanes = 4;
- return mipi_dsi_attach(dsi);
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ return 0;
}
static int feiyang_dsi_remove(struct mipi_dsi_device *dsi)
diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c
index 733010b5e4f53..3c86ad262d5e0 100644
--- a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c
+++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c
@@ -473,7 +473,13 @@ static int jdi_panel_probe(struct mipi_dsi_device *dsi)
if (ret < 0)
return ret;
- return mipi_dsi_attach(dsi);
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ jdi_panel_del(jdi);
+ return ret;
+ }
+
+ return 0;
}
static int jdi_panel_remove(struct mipi_dsi_device *dsi)
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
index 533cd3934b8b7..839b263fb3c0f 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
@@ -656,7 +656,13 @@ static int nt36672a_panel_probe(struct mipi_dsi_device *dsi)
if (err < 0)
return err;
- return mipi_dsi_attach(dsi);
+ err = mipi_dsi_attach(dsi);
+ if (err < 0) {
+ drm_panel_remove(&pinfo->base);
+ return err;
+ }
+
+ return 0;
}
static int nt36672a_panel_remove(struct mipi_dsi_device *dsi)
diff --git a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
index 3c20beeb17819..3991f5d950af4 100644
--- a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
+++ b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
@@ -241,7 +241,13 @@ static int wuxga_nt_panel_probe(struct mipi_dsi_device *dsi)
if (ret < 0)
return ret;
- return mipi_dsi_attach(dsi);
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ wuxga_nt_panel_del(wuxga_nt);
+ return ret;
+ }
+
+ return 0;
}
static int wuxga_nt_panel_remove(struct mipi_dsi_device *dsi)
diff --git a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
index a3782830ae3c4..1fb579a574d9f 100644
--- a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
+++ b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
@@ -199,7 +199,13 @@ static int rb070d30_panel_dsi_probe(struct mipi_dsi_device *dsi)
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->lanes = 4;
- return mipi_dsi_attach(dsi);
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ return 0;
}
static int rb070d30_panel_dsi_remove(struct mipi_dsi_device *dsi)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
index ea63799ff2a1e..29fde3823212b 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
@@ -247,6 +247,7 @@ static int s6e88a0_ams452ef01_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+ drm_panel_remove(&ctx->panel);
return ret;
}
diff --git a/drivers/gpu/drm/panel/panel-samsung-sofef00.c b/drivers/gpu/drm/panel/panel-samsung-sofef00.c
index 8cb1853574bb8..6d107e14fcc55 100644
--- a/drivers/gpu/drm/panel/panel-samsung-sofef00.c
+++ b/drivers/gpu/drm/panel/panel-samsung-sofef00.c
@@ -302,6 +302,7 @@ static int sofef00_panel_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+ drm_panel_remove(&ctx->panel);
return ret;
}
diff --git a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c
index b937e24dac8e0..25829a0a8e801 100644
--- a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c
+++ b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c
@@ -296,7 +296,13 @@ static int sharp_nt_panel_probe(struct mipi_dsi_device *dsi)
if (ret < 0)
return ret;
- return mipi_dsi_attach(dsi);
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ sharp_nt_panel_del(sharp_nt);
+ return ret;
+ }
+
+ return 0;
}
static int sharp_nt_panel_remove(struct mipi_dsi_device *dsi)
--
2.34.1
From: Maxim Levitsky <[email protected]>
[ Upstream commit 01b297a48a26bcb96769505ac948db4603b72bd1 ]
Otherwise it is guaranteed to not work after the resume...
Fixes: 66929812955bb ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/init.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 9b12a2f7548ac..c1d4e66d2747b 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -2169,7 +2169,6 @@ static int iommu_setup_intcapxt(struct amd_iommu *iommu)
return ret;
}
- iommu_feature_enable(iommu, CONTROL_INTCAPXT_EN);
return 0;
}
@@ -2192,6 +2191,10 @@ static int iommu_init_irq(struct amd_iommu *iommu)
iommu->int_enabled = true;
enable_faults:
+
+ if (amd_iommu_xt_mode == IRQ_REMAP_X2APIC_MODE)
+ iommu_feature_enable(iommu, CONTROL_INTCAPXT_EN);
+
iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
if (iommu->ppr_log != NULL)
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 76f66dfd60dc5d2f9dec22d99091fea1035c5d03 ]
Provide a simple implementation of clk_set_parent() in the lantiq
subarch so that callers of it will build without errors.
Fixes these build errors:
ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!
Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
[email protected] --cc="John Crispin <[email protected]>" --cc="Jonathan Cameron <[email protected]>" --cc="Russell King <[email protected]>" --cc="Andy Shevchenko <[email protected]>" [email protected] --to="Thomas Bogendoerfer <[email protected]>"
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index 4916cccf378fd..7a623684d9b5e 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -164,6 +164,12 @@ struct clk *clk_get_parent(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_parent);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
static inline u32 get_counter_resolution(void)
{
u32 res;
--
2.34.1
From: Paul Cercueil <[email protected]>
[ Upstream commit fbf3bce458214bb971d3d571515b3b129eac290b ]
Just like before with __bswapdi2(), for MIPS pre-boot when
CONFIG_KERNEL_ZSTD=y the decompressor function will use __ashldi3(), so
the object file should be added to the target object file.
Fixes these build errors:
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x48): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_decompress_wksp_body_default':
decompress.c:(.text.FSE_decompress_wksp_body_default+0xa8): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_getFrameHeader_advanced':
decompress.c:(.text.ZSTD_getFrameHeader_advanced+0x134): undefined reference to `__ashldi3'
Signed-off-by: Paul Cercueil <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/boot/compressed/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 9112bdb86be45..f53510d2f6296 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -56,7 +56,7 @@ $(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c
vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
-vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o
+vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o $(obj)/ashldi3.o
extra-y += ashldi3.c
$(obj)/ashldi3.c: $(obj)/%.c: $(srctree)/lib/%.c FORCE
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit 0b91b4e4dae63cd43871fc2012370b86ee588f91 ]
When connected over USB, the Apple Magic Mouse 2 and the Apple Magic
Trackpad 2 register multiple interfaces, one of them is used to report
the battery level.
However, unlike when connected over Bluetooth, the battery level is not
reported automatically and it is required to fetch it manually.
Fix the battery report descriptor and add a timer to fetch the battery
level.
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-magicmouse.c | 94 +++++++++++++++++++++++++++++++++---
1 file changed, 88 insertions(+), 6 deletions(-)
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index d7687ce706144..eba1e8087bfd1 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -57,6 +57,8 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie
#define MOUSE_REPORT_ID 0x29
#define MOUSE2_REPORT_ID 0x12
#define DOUBLE_REPORT_ID 0xf7
+#define USB_BATTERY_TIMEOUT_MS 60000
+
/* These definitions are not precise, but they're close enough. (Bits
* 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem
* to be some kind of bit mask -- 0x20 may be a near-field reading,
@@ -140,6 +142,7 @@ struct magicmouse_sc {
struct hid_device *hdev;
struct delayed_work work;
+ struct timer_list battery_timer;
};
static int magicmouse_firm_touch(struct magicmouse_sc *msc)
@@ -738,6 +741,44 @@ static void magicmouse_enable_mt_work(struct work_struct *work)
hid_err(msc->hdev, "unable to request touch data (%d)\n", ret);
}
+static int magicmouse_fetch_battery(struct hid_device *hdev)
+{
+#ifdef CONFIG_HID_BATTERY_STRENGTH
+ struct hid_report_enum *report_enum;
+ struct hid_report *report;
+
+ if (!hdev->battery || hdev->vendor != USB_VENDOR_ID_APPLE ||
+ (hdev->product != USB_DEVICE_ID_APPLE_MAGICMOUSE2 &&
+ hdev->product != USB_DEVICE_ID_APPLE_MAGICTRACKPAD2))
+ return -1;
+
+ report_enum = &hdev->report_enum[hdev->battery_report_type];
+ report = report_enum->report_id_hash[hdev->battery_report_id];
+
+ if (!report || report->maxfield < 1)
+ return -1;
+
+ if (hdev->battery_capacity == hdev->battery_max)
+ return -1;
+
+ hid_hw_request(hdev, report, HID_REQ_GET_REPORT);
+ return 0;
+#else
+ return -1;
+#endif
+}
+
+static void magicmouse_battery_timer_tick(struct timer_list *t)
+{
+ struct magicmouse_sc *msc = from_timer(msc, t, battery_timer);
+ struct hid_device *hdev = msc->hdev;
+
+ if (magicmouse_fetch_battery(hdev) == 0) {
+ mod_timer(&msc->battery_timer,
+ jiffies + msecs_to_jiffies(USB_BATTERY_TIMEOUT_MS));
+ }
+}
+
static int magicmouse_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
@@ -745,11 +786,6 @@ static int magicmouse_probe(struct hid_device *hdev,
struct hid_report *report;
int ret;
- if (id->vendor == USB_VENDOR_ID_APPLE &&
- id->product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2 &&
- hdev->type != HID_TYPE_USBMOUSE)
- return -ENODEV;
-
msc = devm_kzalloc(&hdev->dev, sizeof(*msc), GFP_KERNEL);
if (msc == NULL) {
hid_err(hdev, "can't alloc magicmouse descriptor\n");
@@ -775,6 +811,16 @@ static int magicmouse_probe(struct hid_device *hdev,
return ret;
}
+ timer_setup(&msc->battery_timer, magicmouse_battery_timer_tick, 0);
+ mod_timer(&msc->battery_timer,
+ jiffies + msecs_to_jiffies(USB_BATTERY_TIMEOUT_MS));
+ magicmouse_fetch_battery(hdev);
+
+ if (id->vendor == USB_VENDOR_ID_APPLE &&
+ (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE2 ||
+ (id->product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2 && hdev->type != HID_TYPE_USBMOUSE)))
+ return 0;
+
if (!msc->input) {
hid_err(hdev, "magicmouse input not registered\n");
ret = -ENOMEM;
@@ -835,17 +881,52 @@ static void magicmouse_remove(struct hid_device *hdev)
{
struct magicmouse_sc *msc = hid_get_drvdata(hdev);
- if (msc)
+ if (msc) {
cancel_delayed_work_sync(&msc->work);
+ del_timer_sync(&msc->battery_timer);
+ }
hid_hw_stop(hdev);
}
+static __u8 *magicmouse_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int *rsize)
+{
+ /*
+ * Change the usage from:
+ * 0x06, 0x00, 0xff, // Usage Page (Vendor Defined Page 1) 0
+ * 0x09, 0x0b, // Usage (Vendor Usage 0x0b) 3
+ * To:
+ * 0x05, 0x01, // Usage Page (Generic Desktop) 0
+ * 0x09, 0x02, // Usage (Mouse) 2
+ */
+ if (hdev->vendor == USB_VENDOR_ID_APPLE &&
+ (hdev->product == USB_DEVICE_ID_APPLE_MAGICMOUSE2 ||
+ hdev->product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) &&
+ *rsize == 83 && rdesc[46] == 0x84 && rdesc[58] == 0x85) {
+ hid_info(hdev,
+ "fixing up magicmouse battery report descriptor\n");
+ *rsize = *rsize - 1;
+ rdesc = kmemdup(rdesc + 1, *rsize, GFP_KERNEL);
+ if (!rdesc)
+ return NULL;
+
+ rdesc[0] = 0x05;
+ rdesc[1] = 0x01;
+ rdesc[2] = 0x09;
+ rdesc[3] = 0x02;
+ }
+
+ return rdesc;
+}
+
static const struct hid_device_id magic_mice[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_MAGICMOUSE), .driver_data = 0 },
{ HID_BLUETOOTH_DEVICE(BT_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_MAGICMOUSE2), .driver_data = 0 },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE,
+ USB_DEVICE_ID_APPLE_MAGICMOUSE2), .driver_data = 0 },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_MAGICTRACKPAD), .driver_data = 0 },
{ HID_BLUETOOTH_DEVICE(BT_VENDOR_ID_APPLE,
@@ -861,6 +942,7 @@ static struct hid_driver magicmouse_driver = {
.id_table = magic_mice,
.probe = magicmouse_probe,
.remove = magicmouse_remove,
+ .report_fixup = magicmouse_report_fixup,
.raw_event = magicmouse_raw_event,
.event = magicmouse_event,
.input_mapping = magicmouse_input_mapping,
--
2.34.1
From: Wei Yongjun <[email protected]>
[ Upstream commit fcee5ce50bdb21116711e38635e3865594af907e ]
When firmware load failed, kernel report task hung as follows:
INFO: task xrun:5191 blocked for more than 147 seconds.
Tainted: G W 5.16.0-rc5-next-20211220+ #11
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004
Call Trace:
__schedule+0xc12/0x4b50 kernel/sched/core.c:4986
schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1)
schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857
wait_for_completion+0x181/0x290 kernel/sched/completion.c:85
lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221
spi_remove+0x72/0xb0 drivers/spi/spi.c:409
lattice_ecp3_remove() wait for signals from firmware loading, but when
load failed, firmware_load() does not send this signal. This cause
device remove hung. Fix it by sending signal even if load failed.
Fixes: 781551df57c7 ("misc: Add Lattice ECP3 FPGA configuration via SPI")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/lattice-ecp3-config.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index 0f54730c7ed56..98828030b5a4d 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -76,12 +76,12 @@ static void firmware_load(const struct firmware *fw, void *context)
if (fw == NULL) {
dev_err(&spi->dev, "Cannot load firmware, aborting\n");
- return;
+ goto out;
}
if (fw->size == 0) {
dev_err(&spi->dev, "Error: Firmware size is 0!\n");
- return;
+ goto out;
}
/* Fill dummy data (24 stuffing bits for commands) */
@@ -103,7 +103,7 @@ static void firmware_load(const struct firmware *fw, void *context)
dev_err(&spi->dev,
"Error: No supported FPGA detected (JEDEC_ID=%08x)!\n",
jedec_id);
- return;
+ goto out;
}
dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name);
@@ -116,7 +116,7 @@ static void firmware_load(const struct firmware *fw, void *context)
buffer = kzalloc(fw->size + 8, GFP_KERNEL);
if (!buffer) {
dev_err(&spi->dev, "Error: Can't allocate memory!\n");
- return;
+ goto out;
}
/*
@@ -155,7 +155,7 @@ static void firmware_load(const struct firmware *fw, void *context)
"Error: Timeout waiting for FPGA to clear (status=%08x)!\n",
status);
kfree(buffer);
- return;
+ goto out;
}
dev_info(&spi->dev, "Configuring the FPGA...\n");
@@ -181,7 +181,7 @@ static void firmware_load(const struct firmware *fw, void *context)
release_firmware(fw);
kfree(buffer);
-
+out:
complete(&data->fw_loaded);
}
--
2.34.1
From: Wei Yongjun <[email protected]>
[ Upstream commit 75d9b8559ac36e059238ee4f8e33cd86086586ba ]
Fault injection test reported memory leak of hci device as follows:
unreferenced object 0xffff88800b858000 (size 8192):
comm "kworker/0:2", pid 167, jiffies 4294955747 (age 557.148s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
backtrace:
[<0000000070eb1059>] kmem_cache_alloc_trace mm/slub.c:3208
[<00000000015eb521>] hci_alloc_dev_priv include/linux/slab.h:591
[<00000000dcfc1e21>] bpa10x_probe include/net/bluetooth/hci_core.h:1240
[<000000005d3028c7>] usb_probe_interface drivers/usb/core/driver.c:397
[<00000000cbac9243>] really_probe drivers/base/dd.c:517
[<0000000024cab3f0>] __driver_probe_device drivers/base/dd.c:751
[<00000000202135cb>] driver_probe_device drivers/base/dd.c:782
[<000000000761f2bc>] __device_attach_driver drivers/base/dd.c:899
[<00000000f7d63134>] bus_for_each_drv drivers/base/bus.c:427
[<00000000c9551f0b>] __device_attach drivers/base/dd.c:971
[<000000007f79bd16>] bus_probe_device drivers/base/bus.c:487
[<000000007bb8b95a>] device_add drivers/base/core.c:3364
[<000000009564d9ea>] usb_set_configuration drivers/usb/core/message.c:2171
[<00000000e4657087>] usb_generic_driver_probe drivers/usb/core/generic.c:239
[<0000000071ede518>] usb_probe_device drivers/usb/core/driver.c:294
[<00000000cbac9243>] really_probe drivers/base/dd.c:517
hci_alloc_dev() do not init the device's flag. And hci_free_dev()
using put_device() to free the memory allocated for this device,
but it calls just put_device(dev) only in case of HCI_UNREGISTER
flag is set, So any error handing before hci_register_dev() success
will cause memory leak.
To avoid this behaviour we can using kfree() to release dev before
hci_register_dev() success.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_sysfs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 7827639ecf5c3..4e3e0451b08c1 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -86,6 +86,8 @@ static void bt_host_release(struct device *dev)
if (hci_dev_test_flag(hdev, HCI_UNREGISTER))
hci_release_dev(hdev);
+ else
+ kfree(hdev);
module_put(THIS_MODULE);
}
--
2.34.1
From: Baochen Qiang <[email protected]>
[ Upstream commit 273703ebdb01b6c5f1aaf4b98fb57b177609055c ]
Commit 31582373a4a8 ("ath11k: Change number of TCL rings to one for
QCA6390") avoids initializing the other entries of dp->tx_ring cause
the corresponding TX rings on QCA6390/WCN6855 are not used, but leaves
those ring masks in ath11k_hw_ring_mask_qca6390.tx unchanged. Normally
this is OK because we will only get interrupts from the first TX ring
on these chips and thus only the first entry of dp->tx_ring is involved.
In case of one MSI vector, all DP rings share the same IRQ. For each
interrupt, all rings have to be checked, which means the other entries
of dp->tx_ring are involved. However since they are not initialized,
system crashes.
Fix this issue by simply removing those ring masks.
crash stack:
[ 102.907438] BUG: kernel NULL pointer dereference, address: 0000000000000028
[ 102.907447] #PF: supervisor read access in kernel mode
[ 102.907451] #PF: error_code(0x0000) - not-present page
[ 102.907453] PGD 1081f0067 P4D 1081f0067 PUD 1081f1067 PMD 0
[ 102.907460] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 102.907465] CPU: 0 PID: 3511 Comm: apt-check Kdump: loaded Tainted: G E 5.15.0-rc4-wt-ath+ #20
[ 102.907470] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS RCD1005E 10/08/2020
[ 102.907472] RIP: 0010:ath11k_dp_tx_completion_handler+0x201/0x830 [ath11k]
[ 102.907497] Code: 3c 24 4e 8d ac 37 10 04 00 00 4a 8d bc 37 68 04 00 00 48 89 3c 24 48 63 c8 89 83 84 18 00 00 48 c1 e1 05 48 03 8b 78 18 00 00 <8b> 51 08 89 d6 83 e6 07 89 74 24 24 83 fe 03 74 04 85 f6 75 63 41
[ 102.907501] RSP: 0000:ffff9b7340003e08 EFLAGS: 00010202
[ 102.907505] RAX: 0000000000000001 RBX: ffff8e21530c0100 RCX: 0000000000000020
[ 102.907508] RDX: 0000000000000000 RSI: 00000000fffffe00 RDI: ffff8e21530c1938
[ 102.907511] RBP: ffff8e21530c0000 R08: 0000000000000001 R09: 0000000000000000
[ 102.907513] R10: ffff8e2145534c10 R11: 0000000000000001 R12: ffff8e21530c2938
[ 102.907515] R13: ffff8e21530c18e0 R14: 0000000000000100 R15: ffff8e21530c2978
[ 102.907518] FS: 00007f5d4297e740(0000) GS:ffff8e243d600000(0000) knlGS:0000000000000000
[ 102.907521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.907524] CR2: 0000000000000028 CR3: 00000001034ea000 CR4: 0000000000350ef0
[ 102.907527] Call Trace:
[ 102.907531] <IRQ>
[ 102.907537] ath11k_dp_service_srng+0x5c/0x2f0 [ath11k]
[ 102.907556] ath11k_pci_ext_grp_napi_poll+0x21/0x70 [ath11k_pci]
[ 102.907562] __napi_poll+0x2c/0x160
[ 102.907570] net_rx_action+0x251/0x310
[ 102.907576] __do_softirq+0x107/0x2fc
[ 102.907585] irq_exit_rcu+0x74/0x90
[ 102.907593] common_interrupt+0x83/0xa0
[ 102.907600] </IRQ>
[ 102.907601] asm_common_interrupt+0x1e/0x40
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/hw.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index d9596903b0a58..3e92cc7cfe4c9 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -1015,8 +1015,6 @@ const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_ipq8074 = {
const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_qca6390 = {
.tx = {
ATH11K_TX_RING_MASK_0,
- ATH11K_TX_RING_MASK_1,
- ATH11K_TX_RING_MASK_2,
},
.rx_mon_status = {
0, 0, 0, 0,
--
2.34.1
From: Amjad Ouled-Ameur <[email protected]>
[ Upstream commit 4ce3b45704d5ef46fb4b28083c8aba6716fabf3b ]
reset_control_(de)assert() calls are called on a shared reset line when
reset_control_reset has been used. This is not allowed by the reset
framework.
Use reset_control_rearm() call in suspend() and remove() as a way to state
that the resource is no longer used, hence the shared reset line
may be triggered again by other devices. Use reset_control_rearm() also in
case probe fails after reset() has been called.
reset_control_rearm() keeps use of triggered_count sane in the reset
framework, use of reset_control_reset() on shared reset line should be
balanced with reset_control_rearm().
Signed-off-by: Amjad Ouled-Ameur <[email protected]>
Reported-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index d0f9b7c296b0d..bd814df3bf8b8 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -755,16 +755,16 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
ret = dwc3_meson_g12a_get_phys(priv);
if (ret)
- goto err_disable_clks;
+ goto err_rearm;
ret = priv->drvdata->setup_regmaps(priv, base);
if (ret)
- goto err_disable_clks;
+ goto err_rearm;
if (priv->vbus) {
ret = regulator_enable(priv->vbus);
if (ret)
- goto err_disable_clks;
+ goto err_rearm;
}
/* Get dr_mode */
@@ -825,6 +825,9 @@ err_disable_regulator:
if (priv->vbus)
regulator_disable(priv->vbus);
+err_rearm:
+ reset_control_rearm(priv->reset);
+
err_disable_clks:
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
@@ -852,6 +855,8 @@ static int dwc3_meson_g12a_remove(struct platform_device *pdev)
pm_runtime_put_noidle(dev);
pm_runtime_set_suspended(dev);
+ reset_control_rearm(priv->reset);
+
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
@@ -892,7 +897,7 @@ static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
phy_exit(priv->phys[i]);
}
- reset_control_assert(priv->reset);
+ reset_control_rearm(priv->reset);
return 0;
}
@@ -902,7 +907,9 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
int i, ret;
- reset_control_deassert(priv->reset);
+ ret = reset_control_reset(priv->reset);
+ if (ret)
+ return ret;
ret = priv->drvdata->usb_init(priv);
if (ret)
--
2.34.1
From: Trevor Wu <[email protected]>
[ Upstream commit 2355028c0c54c03afb66c589347f1dc9f6fe2e38 ]
Originally, the conditions for preventing reentry are not correct.
dai->component->active is not the state specifically for pcmif dai, so it
is not a correct condition to indicate the status of pcmif dai.
On the other hand, snd_soc_dai_stream_actvie() in prepare ops for both
playback and capture possibly return true at the first entry when these
two streams are opened at the same time.
In the patch, I refer to the implementation in mt8192-dai-pcm.c.
Clock and enabling bit for PCMIF are managed by DAPM, and the condition
for prepare ops is replaced by the status of dai widget.
Fixes: 1f95c019115c ("ASoC: mediatek: mt8195: support pcm in platform driver")
Signed-off-by: Trevor Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8195/mt8195-dai-pcm.c | 73 +++++++---------------
sound/soc/mediatek/mt8195/mt8195-reg.h | 1 +
2 files changed, 22 insertions(+), 52 deletions(-)
diff --git a/sound/soc/mediatek/mt8195/mt8195-dai-pcm.c b/sound/soc/mediatek/mt8195/mt8195-dai-pcm.c
index 5d10d2c4c991c..151914c873acd 100644
--- a/sound/soc/mediatek/mt8195/mt8195-dai-pcm.c
+++ b/sound/soc/mediatek/mt8195/mt8195-dai-pcm.c
@@ -80,8 +80,15 @@ static const struct snd_soc_dapm_widget mtk_dai_pcm_widgets[] = {
mtk_dai_pcm_o001_mix,
ARRAY_SIZE(mtk_dai_pcm_o001_mix)),
+ SND_SOC_DAPM_SUPPLY("PCM_EN", PCM_INTF_CON1,
+ PCM_INTF_CON1_PCM_EN_SHIFT, 0, NULL, 0),
+
SND_SOC_DAPM_INPUT("PCM1_INPUT"),
SND_SOC_DAPM_OUTPUT("PCM1_OUTPUT"),
+
+ SND_SOC_DAPM_CLOCK_SUPPLY("aud_asrc11"),
+ SND_SOC_DAPM_CLOCK_SUPPLY("aud_asrc12"),
+ SND_SOC_DAPM_CLOCK_SUPPLY("aud_pcmif"),
};
static const struct snd_soc_dapm_route mtk_dai_pcm_routes[] = {
@@ -97,22 +104,18 @@ static const struct snd_soc_dapm_route mtk_dai_pcm_routes[] = {
{"PCM1 Playback", NULL, "O000"},
{"PCM1 Playback", NULL, "O001"},
+ {"PCM1 Playback", NULL, "PCM_EN"},
+ {"PCM1 Playback", NULL, "aud_asrc12"},
+ {"PCM1 Playback", NULL, "aud_pcmif"},
+
+ {"PCM1 Capture", NULL, "PCM_EN"},
+ {"PCM1 Capture", NULL, "aud_asrc11"},
+ {"PCM1 Capture", NULL, "aud_pcmif"},
+
{"PCM1_OUTPUT", NULL, "PCM1 Playback"},
{"PCM1 Capture", NULL, "PCM1_INPUT"},
};
-static void mtk_dai_pcm_enable(struct mtk_base_afe *afe)
-{
- regmap_update_bits(afe->regmap, PCM_INTF_CON1,
- PCM_INTF_CON1_PCM_EN, PCM_INTF_CON1_PCM_EN);
-}
-
-static void mtk_dai_pcm_disable(struct mtk_base_afe *afe)
-{
- regmap_update_bits(afe->regmap, PCM_INTF_CON1,
- PCM_INTF_CON1_PCM_EN, 0x0);
-}
-
static int mtk_dai_pcm_configure(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -207,54 +210,22 @@ static int mtk_dai_pcm_configure(struct snd_pcm_substream *substream,
}
/* dai ops */
-static int mtk_dai_pcm_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
- struct mt8195_afe_private *afe_priv = afe->platform_priv;
-
- if (dai->component->active)
- return 0;
-
- mt8195_afe_enable_clk(afe, afe_priv->clk[MT8195_CLK_AUD_ASRC11]);
- mt8195_afe_enable_clk(afe, afe_priv->clk[MT8195_CLK_AUD_ASRC12]);
- mt8195_afe_enable_clk(afe, afe_priv->clk[MT8195_CLK_AUD_PCMIF]);
-
- return 0;
-}
-
-static void mtk_dai_pcm_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
- struct mt8195_afe_private *afe_priv = afe->platform_priv;
-
- if (dai->component->active)
- return;
-
- mtk_dai_pcm_disable(afe);
-
- mt8195_afe_disable_clk(afe, afe_priv->clk[MT8195_CLK_AUD_PCMIF]);
- mt8195_afe_disable_clk(afe, afe_priv->clk[MT8195_CLK_AUD_ASRC12]);
- mt8195_afe_disable_clk(afe, afe_priv->clk[MT8195_CLK_AUD_ASRC11]);
-}
-
static int mtk_dai_pcm_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
- struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
- int ret = 0;
+ int ret;
- if (snd_soc_dai_stream_active(dai, SNDRV_PCM_STREAM_PLAYBACK) &&
- snd_soc_dai_stream_active(dai, SNDRV_PCM_STREAM_CAPTURE))
+ dev_dbg(dai->dev, "%s(), id %d, stream %d, widget active p %d, c %d\n",
+ __func__, dai->id, substream->stream,
+ dai->playback_widget->active, dai->capture_widget->active);
+
+ if (dai->playback_widget->active || dai->capture_widget->active)
return 0;
ret = mtk_dai_pcm_configure(substream, dai);
if (ret)
return ret;
- mtk_dai_pcm_enable(afe);
-
return 0;
}
@@ -316,8 +287,6 @@ static int mtk_dai_pcm_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
}
static const struct snd_soc_dai_ops mtk_dai_pcm_ops = {
- .startup = mtk_dai_pcm_startup,
- .shutdown = mtk_dai_pcm_shutdown,
.prepare = mtk_dai_pcm_prepare,
.set_fmt = mtk_dai_pcm_set_fmt,
};
diff --git a/sound/soc/mediatek/mt8195/mt8195-reg.h b/sound/soc/mediatek/mt8195/mt8195-reg.h
index d06f9cf85a4ec..d3871353db415 100644
--- a/sound/soc/mediatek/mt8195/mt8195-reg.h
+++ b/sound/soc/mediatek/mt8195/mt8195-reg.h
@@ -2550,6 +2550,7 @@
#define PCM_INTF_CON1_PCM_FMT(x) (((x) & 0x3) << 1)
#define PCM_INTF_CON1_PCM_FMT_MASK (0x3 << 1)
#define PCM_INTF_CON1_PCM_EN BIT(0)
+#define PCM_INTF_CON1_PCM_EN_SHIFT 0
/* PCM_INTF_CON2 */
#define PCM_INTF_CON2_CLK_DOMAIN_SEL(x) (((x) & 0x3) << 23)
--
2.34.1
From: Swapnil Jakhade <[email protected]>
[ Upstream commit da08aab940092a050a4fb2857ed9479d2b0e03c4 ]
Fix get_parent() callback to return the correct index of the parent for
PLL_CMNLC1 clock. Add a separate table of register values corresponding
to the parent index for PLL_CMNLC1. Update set_parent() callback
accordingly.
Fixes: 28081b72859f ("phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux clocks)")
Signed-off-by: Swapnil Jakhade <[email protected]>
Reviewed-by: Aswath Govindraju <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/cadence/phy-cadence-sierra.c | 31 ++++++++++++++++++++----
1 file changed, 26 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index e93818e3991fd..3e2d096d54fd7 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -215,7 +215,10 @@ static const int pll_mux_parent_index[][SIERRA_NUM_CMN_PLLC_PARENTS] = {
[CMN_PLLLC1] = { PLL1_REFCLK, PLL0_REFCLK },
};
-static u32 cdns_sierra_pll_mux_table[] = { 0, 1 };
+static u32 cdns_sierra_pll_mux_table[][SIERRA_NUM_CMN_PLLC_PARENTS] = {
+ [CMN_PLLLC] = { 0, 1 },
+ [CMN_PLLLC1] = { 1, 0 },
+};
struct cdns_sierra_inst {
struct phy *phy;
@@ -436,11 +439,25 @@ static const struct phy_ops ops = {
static u8 cdns_sierra_pll_mux_get_parent(struct clk_hw *hw)
{
struct cdns_sierra_pll_mux *mux = to_cdns_sierra_pll_mux(hw);
+ struct regmap_field *plllc1en_field = mux->plllc1en_field;
+ struct regmap_field *termen_field = mux->termen_field;
struct regmap_field *field = mux->pfdclk_sel_preg;
unsigned int val;
+ int index;
regmap_field_read(field, &val);
- return clk_mux_val_to_index(hw, cdns_sierra_pll_mux_table, 0, val);
+
+ if (strstr(clk_hw_get_name(hw), clk_names[CDNS_SIERRA_PLL_CMNLC1])) {
+ index = clk_mux_val_to_index(hw, cdns_sierra_pll_mux_table[CMN_PLLLC1], 0, val);
+ if (index == 1) {
+ regmap_field_write(plllc1en_field, 1);
+ regmap_field_write(termen_field, 1);
+ }
+ } else {
+ index = clk_mux_val_to_index(hw, cdns_sierra_pll_mux_table[CMN_PLLLC], 0, val);
+ }
+
+ return index;
}
static int cdns_sierra_pll_mux_set_parent(struct clk_hw *hw, u8 index)
@@ -458,7 +475,11 @@ static int cdns_sierra_pll_mux_set_parent(struct clk_hw *hw, u8 index)
ret |= regmap_field_write(termen_field, 1);
}
- val = cdns_sierra_pll_mux_table[index];
+ if (strstr(clk_hw_get_name(hw), clk_names[CDNS_SIERRA_PLL_CMNLC1]))
+ val = cdns_sierra_pll_mux_table[CMN_PLLLC1][index];
+ else
+ val = cdns_sierra_pll_mux_table[CMN_PLLLC][index];
+
ret |= regmap_field_write(field, val);
return ret;
@@ -496,8 +517,8 @@ static int cdns_sierra_pll_mux_register(struct cdns_sierra_phy *sp,
for (i = 0; i < num_parents; i++) {
clk = sp->input_clks[pll_mux_parent_index[clk_index][i]];
if (IS_ERR_OR_NULL(clk)) {
- dev_err(dev, "No parent clock for derived_refclk\n");
- return PTR_ERR(clk);
+ dev_err(dev, "No parent clock for PLL mux clocks\n");
+ return IS_ERR(clk) ? PTR_ERR(clk) : -ENOENT;
}
parent_names[i] = __clk_get_name(clk);
}
--
2.34.1
From: Haimin Zhang <[email protected]>
[ Upstream commit 9933698f6119886c110750e67c10ac66f12b730f ]
Due to (wIndex & 0xff) - 1 can get an integer greater than 15, this
can cause array index to be out of bounds since the size of array
port_status is 15. This change prevents a possible out-of-bounds
pointer computation by forcing the use of a valid port number.
Reported-by: TCS Robot <[email protected]>
Signed-off-by: Haimin Zhang <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ehci-brcm.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
index d3626bfa966b4..6a0f64c9e5e88 100644
--- a/drivers/usb/host/ehci-brcm.c
+++ b/drivers/usb/host/ehci-brcm.c
@@ -62,8 +62,12 @@ static int ehci_brcm_hub_control(
u32 __iomem *status_reg;
unsigned long flags;
int retval, irq_disabled = 0;
+ u32 temp;
- status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
+ temp = (wIndex & 0xff) - 1;
+ if (temp >= HCS_N_PORTS_MAX) /* Avoid index-out-of-bounds warning */
+ temp = 0;
+ status_reg = &ehci->regs->port_status[temp];
/*
* RESUME is cleared when GetPortStatus() is called 20ms after start
--
2.34.1
From: jason-jh.lin <[email protected]>
[ Upstream commit 35ca43710f792ce183312fdc7e4b2bb0b721a173 ]
Because mt8192 only have 1 gce, the gce_num should be 1.
Fixes: 85dfdbfc13ea ("mailbox: cmdq: add multi-gce clocks support for mt8195")
Signed-off-by: jason-jh.lin <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mailbox/mtk-cmdq-mailbox.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index bb4793c7b38fd..3583c2aad0edc 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -660,7 +660,7 @@ static const struct gce_plat gce_plat_v5 = {
.thread_nr = 24,
.shift = 3,
.control_by_sw = true,
- .gce_num = 2
+ .gce_num = 1
};
static const struct gce_plat gce_plat_v6 = {
--
2.34.1
From: Paul Cercueil <[email protected]>
[ Upstream commit c5c7440fe7f74645940d5c9e2c49cd7efb706a4f ]
Fix the following build issues:
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x2cc): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `BIT_initDStream':
decompress.c:(.text.BIT_initDStream+0x7c): undefined reference to `__clzdi2'
mips64el-linux-ld: decompress.c:(.text.BIT_initDStream+0x158): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_buildFSETable_body_default.constprop.0':
decompress.c:(.text.ZSTD_buildFSETable_body_default.constprop.0+0x2a8): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_readNCount_body_default':
decompress.c:(.text.FSE_readNCount_body_default+0x130): undefined reference to `__ctzdi2'
mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x1a4): undefined reference to `__ctzdi2'
mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x2e4): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `HUF_readStats_body_default':
decompress.c:(.text.HUF_readStats_body_default+0x184): undefined reference to `__clzdi2'
mips64el-linux-ld: decompress.c:(.text.HUF_readStats_body_default+0x1b4): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_DCtx_getParameter':
decompress.c:(.text.ZSTD_DCtx_getParameter+0x60): undefined reference to `__clzdi2'
Fixes: a510b616131f ("MIPS: Add support for ZSTD-compressed kernels")
Reported-by: kernel test robot <[email protected]>
Reported-by: Nick Terrell <[email protected]>
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/boot/compressed/Makefile | 2 +-
arch/mips/boot/compressed/clz_ctz.c | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/boot/compressed/clz_ctz.c
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index f53510d2f6296..705b9e7f8035a 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -56,7 +56,7 @@ $(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c
vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
-vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o $(obj)/ashldi3.o
+vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o $(obj)/ashldi3.o $(obj)/clz_ctz.o
extra-y += ashldi3.c
$(obj)/ashldi3.c: $(obj)/%.c: $(srctree)/lib/%.c FORCE
diff --git a/arch/mips/boot/compressed/clz_ctz.c b/arch/mips/boot/compressed/clz_ctz.c
new file mode 100644
index 0000000000000..b4a1b6eb2f8ad
--- /dev/null
+++ b/arch/mips/boot/compressed/clz_ctz.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/clz_ctz.c"
--
2.34.1
From: Jan Kiszka <[email protected]>
[ Upstream commit 8aa35e0bb5eaa42bac415ad0847985daa7b4890c ]
So far, "(null)" is reported for the node that is missing clocks.
Signed-off-by: Jan Kiszka <[email protected]>
Acked-by: Suman Anna <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/ti/pruss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 49da387d77494..b36779309e49b 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -129,7 +129,7 @@ static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node)
clks_np = of_get_child_by_name(cfg_node, "clocks");
if (!clks_np) {
- dev_err(dev, "%pOF is missing its 'clocks' node\n", clks_np);
+ dev_err(dev, "%pOF is missing its 'clocks' node\n", cfg_node);
return -ENODEV;
}
--
2.34.1
From: Ryuta NAKANISHI <[email protected]>
[ Upstream commit 898c7a9ec81620125f2463714a0f4dea18ad6e54 ]
Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy
parameters"), in function uniphier_u3ssphy_set_param(), unintentionally
write zeros to other fields when writing PHY registers.
Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC")
Signed-off-by: Ryuta NAKANISHI <[email protected]>
Signed-off-by: Kunihiko Hayashi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/socionext/phy-uniphier-usb3ss.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index 6700645bcbe6b..3b5ffc16a6947 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -22,11 +22,13 @@
#include <linux/reset.h>
#define SSPHY_TESTI 0x0
-#define SSPHY_TESTO 0x4
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
+#define SSPHY_TESTO 0x4
+#define TESTO_DAT_MASK GENMASK(7, 0)
+
#define PHY_F(regno, msb, lsb) { (regno), (msb), (lsb) }
#define CDR_CPD_TRIM PHY_F(7, 3, 0) /* RxPLL charge pump current */
@@ -84,12 +86,12 @@ static void uniphier_u3ssphy_set_param(struct uniphier_u3ssphy_priv *priv,
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
- val = readl(priv->base + SSPHY_TESTO);
+ val = readl(priv->base + SSPHY_TESTO) & TESTO_DAT_MASK;
/* update value */
- val &= ~FIELD_PREP(TESTI_DAT_MASK, field_mask);
+ val &= ~field_mask;
data = field_mask & (p->value << p->field.lsb);
- val = FIELD_PREP(TESTI_DAT_MASK, data);
+ val = FIELD_PREP(TESTI_DAT_MASK, data | val);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
uniphier_u3ssphy_testio_write(priv, val | TESTI_WR_EN);
--
2.34.1
From: Archie Pusaka <[email protected]>
[ Upstream commit 2128939fe2e771645dd88e1938c27fdf96bd1cd0 ]
If we remove one instance of adv using Set Extended Adv Enable, there
is a possibility of issue occurs when processing the Command Complete
event. Especially, the adv_info might not be found since we already
remove it in hci_req_clear_adv_instance() -> hci_remove_adv_instance().
If that's the case, we will mistakenly proceed to remove all adv
instances instead of just one single instance.
This patch fixes the issue by checking the content of the HCI command
instead of checking whether the adv_info is found.
Signed-off-by: Archie Pusaka <[email protected]>
Reviewed-by: Sonny Sasaka <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_event.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 50d1d62c15ec8..20e36126bbdae 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1325,8 +1325,10 @@ static void hci_cc_le_set_ext_adv_enable(struct hci_dev *hdev,
&conn->le_conn_timeout,
conn->conn_timeout);
} else {
- if (adv) {
- adv->enabled = false;
+ if (cp->num_of_sets) {
+ if (adv)
+ adv->enabled = false;
+
/* If just one instance was disabled check if there are
* any other instance enabled before clearing HCI_LE_ADV
*/
--
2.34.1
From: Yang Li <[email protected]>
[ Upstream commit a689e8d1f80012f90384ebac9dcfac4201f9f77e ]
Clang static analysis reports this error
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2870:7: warning:
Dereference of null pointer [clang-analyzer-core.NullDereference]
if
(top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
^
top_pipe_to_program being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index c798c65d42765..1860ccc3f4f2c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2703,7 +2703,8 @@ static void commit_planes_for_stream(struct dc *dc,
#endif
if ((update_type != UPDATE_TYPE_FAST) && stream->update_flags.bits.dsc_changed)
- if (top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
+ if (top_pipe_to_program &&
+ top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
if (should_use_dmub_lock(stream->link)) {
union dmub_hw_lock_flags hw_locks = { 0 };
struct dmub_hw_lock_inst_flags inst_flags = { 0 };
--
2.34.1
From: Marek Vasut <[email protected]>
[ Upstream commit f756f435f7dd823f2d4bd593ce1bf3168def1308 ]
In case the following power domain sequence happens, iMX8M Mini always hangs:
gpumix:on -> gpu:on -> gpu:off -> gpu:on
This is likely due to another quirk of the GPC block. This situation can be
prevented by always synchronously powering off both the domain and MIX domain.
Make it so. This turns the aforementioned sequence into:
gpumix:on -> gpu:on -> gpu:off -> gpumix:off -> gpumix:on -> gpu:on
Signed-off-by: Marek Vasut <[email protected]>
Cc: Frieder Schrempf <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Shawn Guo <[email protected]>
Acked-by: Lucas Stach <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/imx/gpcv2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 8b7a01773aec2..b4aa28420f2a8 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -369,7 +369,7 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
}
}
- pm_runtime_put(domain->dev);
+ pm_runtime_put_sync_suspend(domain->dev);
return 0;
--
2.34.1
From: Konrad Dybcio <[email protected]>
[ Upstream commit f52dd33943ca5f84ae76890f352f6d9e12512c3f ]
Thermal zone names should not be longer than 20 names, which is indicated by
a message at boot. Change "camera-thermal-bottom" to "cam-thermal-bottom" to
fix it.
Signed-off-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e91cd8a5e5356..296ffb0e9888c 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2185,7 +2185,7 @@
};
};
- camera-thermal-bottom {
+ cam-thermal-bottom {
polling-delay-passive = <250>;
polling-delay = <1000>;
--
2.34.1
From: Dinh Nguyen <[email protected]>
[ Upstream commit bd1d6da17c296bd005bfa656952710d256e77dd3 ]
Version 2.40a supports DDR_ECC_INTR_SUPPORT for a quirk, so use that
quirk to determine a call to setup_address_map().
Signed-off-by: Dinh Nguyen <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Michal Simek <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/edac/synopsys_edac.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 7d08627e738b3..a5486d86fdd2f 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -1352,8 +1352,7 @@ static int mc_probe(struct platform_device *pdev)
}
}
- if (of_device_is_compatible(pdev->dev.of_node,
- "xlnx,zynqmp-ddrc-2.40a"))
+ if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
setup_address_map(priv);
#endif
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit efdd3eb8015e7447095f02a26eaabd164cd18004 ]
According to [0], compilers sometimes might produce duplicate DWARF
definitions for exactly the same struct/union within the same
compilation unit (CU). We've had similar issues with identical arrays
and handled them with a similar workaround in 6b6e6b1d09aa ("libbpf:
Accomodate DWARF/compiler bug with duplicated identical arrays"). Do the
same for struct/union by ensuring that two structs/unions are exactly
the same, down to the integer values of field referenced type IDs.
Solving this more generically (allowing referenced types to be
equivalent, but using different type IDs, all within a single CU)
requires a huge complexity increase to handle many-to-many mappings
between canonidal and candidate type graphs. Before we invest in that,
let's see if this approach handles all the instances of this issue in
practice. Thankfully it's pretty rare, it seems.
[0] https://lore.kernel.org/bpf/YXr2NFlJTAhHdZqq@krava/
Reported-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf.c | 45 +++++++++++++++++++++++++++++++++++++++++----
1 file changed, 41 insertions(+), 4 deletions(-)
diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index 5fa64a7f0dda8..5f3d20ae66d56 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -3358,8 +3358,8 @@ static long btf_hash_struct(struct btf_type *t)
}
/*
- * Check structural compatibility of two FUNC_PROTOs, ignoring referenced type
- * IDs. This check is performed during type graph equivalence check and
+ * Check structural compatibility of two STRUCTs/UNIONs, ignoring referenced
+ * type IDs. This check is performed during type graph equivalence check and
* referenced types equivalence is checked separately.
*/
static bool btf_shallow_equal_struct(struct btf_type *t1, struct btf_type *t2)
@@ -3730,6 +3730,31 @@ static int btf_dedup_identical_arrays(struct btf_dedup *d, __u32 id1, __u32 id2)
return btf_equal_array(t1, t2);
}
+/* Check if given two types are identical STRUCT/UNION definitions */
+static bool btf_dedup_identical_structs(struct btf_dedup *d, __u32 id1, __u32 id2)
+{
+ const struct btf_member *m1, *m2;
+ struct btf_type *t1, *t2;
+ int n, i;
+
+ t1 = btf_type_by_id(d->btf, id1);
+ t2 = btf_type_by_id(d->btf, id2);
+
+ if (!btf_is_composite(t1) || btf_kind(t1) != btf_kind(t2))
+ return false;
+
+ if (!btf_shallow_equal_struct(t1, t2))
+ return false;
+
+ m1 = btf_members(t1);
+ m2 = btf_members(t2);
+ for (i = 0, n = btf_vlen(t1); i < n; i++, m1++, m2++) {
+ if (m1->type != m2->type)
+ return false;
+ }
+ return true;
+}
+
/*
* Check equivalence of BTF type graph formed by candidate struct/union (we'll
* call it "candidate graph" in this description for brevity) to a type graph
@@ -3841,6 +3866,8 @@ static int btf_dedup_is_equiv(struct btf_dedup *d, __u32 cand_id,
hypot_type_id = d->hypot_map[canon_id];
if (hypot_type_id <= BTF_MAX_NR_TYPES) {
+ if (hypot_type_id == cand_id)
+ return 1;
/* In some cases compiler will generate different DWARF types
* for *identical* array type definitions and use them for
* different fields within the *same* struct. This breaks type
@@ -3849,8 +3876,18 @@ static int btf_dedup_is_equiv(struct btf_dedup *d, __u32 cand_id,
* types within a single CU. So work around that by explicitly
* allowing identical array types here.
*/
- return hypot_type_id == cand_id ||
- btf_dedup_identical_arrays(d, hypot_type_id, cand_id);
+ if (btf_dedup_identical_arrays(d, hypot_type_id, cand_id))
+ return 1;
+ /* It turns out that similar situation can happen with
+ * struct/union sometimes, sigh... Handle the case where
+ * structs/unions are exactly the same, down to the referenced
+ * type IDs. Anything more complicated (e.g., if referenced
+ * types are different, but equivalent) is *way more*
+ * complicated and requires a many-to-many equivalence mapping.
+ */
+ if (btf_dedup_identical_structs(d, hypot_type_id, cand_id))
+ return 1;
+ return 0;
}
if (btf_dedup_hypot_map_add(d, canon_id, cand_id))
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit a5fe7864d8ada170f19cc47d176bf8260ffb4263 ]
When a keyboard without a function key is detected, instead of removing
all quirks, remove only the APPLE_HAS_FN quirk.
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-apple.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 6ccfa0cb997ab..b683c0e8557d4 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -429,7 +429,7 @@ static int apple_input_configured(struct hid_device *hdev,
if ((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) {
hid_info(hdev, "Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling\n");
- asc->quirks = 0;
+ asc->quirks &= ~APPLE_HAS_FN;
}
return 0;
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]
Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.
This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.
Signed-off-by: Lukas Bulwahn <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/Kconfig.debug | 14 +++++++-------
arch/arm/include/debug/imx-uart.h | 18 +++++++++---------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 98436702e0c7e..644875d73ba15 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -410,12 +410,12 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX25.
- config DEBUG_IMX21_IMX27_UART
- bool "i.MX21 and i.MX27 Debug UART"
- depends on SOC_IMX21 || SOC_IMX27
+ config DEBUG_IMX27_UART
+ bool "i.MX27 Debug UART"
+ depends on SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
- on i.MX21 or i.MX27.
+ on i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
@@ -1481,7 +1481,7 @@ config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection"
depends on DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
@@ -1540,12 +1540,12 @@ config DEBUG_LL_INCLUDE
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX53_UART ||\
+ DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART || \
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index c8eb83d4b8964..3edbb3c5b42bf 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@
#define IMX1_UART_BASE_ADDR(n) IMX1_UART##n##_BASE_ADDR
#define IMX1_UART_BASE(n) IMX1_UART_BASE_ADDR(n)
-#define IMX21_UART1_BASE_ADDR 0x1000a000
-#define IMX21_UART2_BASE_ADDR 0x1000b000
-#define IMX21_UART3_BASE_ADDR 0x1000c000
-#define IMX21_UART4_BASE_ADDR 0x1000d000
-#define IMX21_UART_BASE_ADDR(n) IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n) IMX21_UART_BASE_ADDR(n)
-
#define IMX25_UART1_BASE_ADDR 0x43f90000
#define IMX25_UART2_BASE_ADDR 0x43f94000
#define IMX25_UART3_BASE_ADDR 0x5000c000
@@ -26,6 +19,13 @@
#define IMX25_UART_BASE_ADDR(n) IMX25_UART##n##_BASE_ADDR
#define IMX25_UART_BASE(n) IMX25_UART_BASE_ADDR(n)
+#define IMX27_UART1_BASE_ADDR 0x1000a000
+#define IMX27_UART2_BASE_ADDR 0x1000b000
+#define IMX27_UART3_BASE_ADDR 0x1000c000
+#define IMX27_UART4_BASE_ADDR 0x1000d000
+#define IMX27_UART_BASE_ADDR(n) IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n) IMX27_UART_BASE_ADDR(n)
+
#define IMX31_UART1_BASE_ADDR 0x43f90000
#define IMX31_UART2_BASE_ADDR 0x43f94000
#define IMX31_UART3_BASE_ADDR 0x5000c000
@@ -112,10 +112,10 @@
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR IMX_DEBUG_UART_BASE(IMX21)
#elif defined(CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX27)
#elif defined(CONFIG_DEBUG_IMX31_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX31)
#elif defined(CONFIG_DEBUG_IMX35_UART)
--
2.34.1
From: Alex Deucher <[email protected]>
[ Upstream commit 92020e81ddbeac351ea4a19bcf01743f32b9c800 ]
Disable vblanks immediately to save power. I think this was
missed when we merged DC support.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1781
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 1 -
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
index cc2e0c9cfe0a1..4f3c62adccbde 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
@@ -333,7 +333,6 @@ int amdgpu_irq_init(struct amdgpu_device *adev)
if (!amdgpu_device_has_dc_support(adev)) {
if (!adev->enable_virtual_display)
/* Disable vblank IRQs aggressively for power-saving */
- /* XXX: can this be enabled for DC? */
adev_to_drm(adev)->vblank_disable_immediate = true;
r = drm_vblank_init(adev_to_drm(adev), adev->mode_info.num_crtc);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 2fbaf6f869bfb..16556ae892d4a 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1279,6 +1279,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
adev_to_drm(adev)->mode_config.cursor_width = adev->dm.dc->caps.max_cursor_size;
adev_to_drm(adev)->mode_config.cursor_height = adev->dm.dc->caps.max_cursor_size;
+ /* Disable vblank IRQs aggressively for power-saving */
+ adev_to_drm(adev)->vblank_disable_immediate = true;
+
if (drm_vblank_init(adev_to_drm(adev), adev->dm.display_indexes_num)) {
DRM_ERROR(
"amdgpu: failed to initialize sw for display support.\n");
--
2.34.1
From: Stephen Boyd <[email protected]>
[ Upstream commit da17d6905d29ddcdc04b2fdc37ed8cf1e8437cc8 ]
In commit 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove
already reserved regions") we returned -EBUSY when trying to mark
regions as no-map when they intersect with reserved memory. The goal was
to find bad no-map reserved memory DT nodes that would unmap the kernel
text/data sections.
The problem is the reserved memory check will still trigger if the DT
has a /memreserve/ that completely subsumes the no-map memory carveouts
in the reserved memory node _and_ that region is also not part of the
memory reg property. For example in sc7180.dtsi we have the following
reserved-memory and memory node:
memory@80000000 {
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
smem_mem: memory@80900000 {
reg = <0x0 0x80900000 0x0 0x200000>;
no-map;
};
and the memreserve filled in by the bootloader is
/memreserve/ 0x80800000 0x400000;
while the /memory node is transformed into
memory@80000000 {
/* The bootloader fills in the size, and adds another region */
reg = <0 0x80000000 0 0x00800000>,
<0 0x80c00000 0 0x7f200000>;
};
The smem region is doubly reserved via /memreserve/ and by not being
part of the /memory reg property. This leads to the following warning
printed at boot.
OF: fdt: Reserved memory: failed to reserve memory for node 'memory@80900000': base 0x0000000080900000, size 2 MiB
Otherwise nothing really goes wrong because the smem region is not going
to be mapped by the kernel's direct linear mapping given that it isn't
part of the memory node. Therefore, let's only consider this to be a
problem if we're trying to mark a region as no-map and it is actually
memory that we're intending to keep out of the kernel's direct mapping
but it's already been reserved.
Acked-by: Mike Rapoport <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: Nicolas Boichat <[email protected]>
Cc: Quentin Perret <[email protected]>
Cc: Jan Kiszka <[email protected]>
Fixes: 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already reserved regions")
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/fdt.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 32e5e782d43da..59a7a9ee58ef7 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -482,9 +482,11 @@ static int __init early_init_dt_reserve_memory_arch(phys_addr_t base,
if (nomap) {
/*
* If the memory is already reserved (by another region), we
- * should not allow it to be marked nomap.
+ * should not allow it to be marked nomap, but don't worry
+ * if the region isn't memory as it won't be mapped.
*/
- if (memblock_is_region_reserved(base, size))
+ if (memblock_overlaps_region(&memblock.memory, base, size) &&
+ memblock_is_region_reserved(base, size))
return -EBUSY;
return memblock_mark_nomap(base, size);
--
2.34.1
From: Niklas Söderlund <[email protected]>
[ Upstream commit da6911f330d40cfe115a37249e47643eff555e82 ]
This change fixes two issues with the size constraints for buffers.
- There is no width alignment constraint for RGB formats. Prior to this
change they were treated as YUV and as a result were more restricted
than needed. Add a new check to differentiate between the two.
- The minimum width and height supported is 5x2, not 2x4, this is an
artifact from the driver's soc-camera days. Fix this incorrect
assumption.
Signed-off-by: Niklas Söderlund <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-v4l2.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 0d141155f0e3e..eb8c79bac540f 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -175,20 +175,27 @@ static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
break;
}
- /* HW limit width to a multiple of 32 (2^5) for NV12/16 else 2 (2^1) */
+ /* Hardware limits width alignment based on format. */
switch (pix->pixelformat) {
+ /* Multiple of 32 (2^5) for NV12/16. */
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV16:
walign = 5;
break;
- default:
+ /* Multiple of 2 (2^1) for YUV. */
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
walign = 1;
break;
+ /* No multiple for RGB. */
+ default:
+ walign = 0;
+ break;
}
/* Limit to VIN capabilities */
- v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
- &pix->height, 4, vin->info->max_height, 2, 0);
+ v4l_bound_align_image(&pix->width, 5, vin->info->max_width, walign,
+ &pix->height, 2, vin->info->max_height, 0, 0);
pix->bytesperline = rvin_format_bytesperline(vin, pix);
pix->sizeimage = rvin_format_sizeimage(pix);
--
2.34.1
From: Shaul Triebitz <[email protected]>
[ Upstream commit 8e967c137df3b236d2075f9538cb888129425d1a ]
When scheduling a session protection the id is saved but
then it may be cleared when calling iwl_mvm_te_clear_data
(if a previous session protection is currently active).
Fix it by saving the id after calling iwl_mvm_te_clear_data.
Signed-off-by: Shaul Triebitz <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index f93f15357a3f8..b8c645b9880fc 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -1167,15 +1167,10 @@ void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
mvmvif->color)),
.action = cpu_to_le32(FW_CTXT_ACTION_ADD),
+ .conf_id = cpu_to_le32(SESSION_PROTECT_CONF_ASSOC),
.duration_tu = cpu_to_le32(MSEC_TO_TU(duration)),
};
- /* The time_event_data.id field is reused to save session
- * protection's configuration.
- */
- mvmvif->time_event_data.id = SESSION_PROTECT_CONF_ASSOC;
- cmd.conf_id = cpu_to_le32(mvmvif->time_event_data.id);
-
lockdep_assert_held(&mvm->mutex);
spin_lock_bh(&mvm->time_event_lock);
@@ -1189,6 +1184,11 @@ void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
}
iwl_mvm_te_clear_data(mvm, te_data);
+ /*
+ * The time_event_data.id field is reused to save session
+ * protection's configuration.
+ */
+ te_data->id = le32_to_cpu(cmd.conf_id);
te_data->duration = le32_to_cpu(cmd.duration_tu);
te_data->vif = vif;
spin_unlock_bh(&mvm->time_event_lock);
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit 04d80663f67ccef893061b49ec8a42ff7045ae84 ]
Currently, with an unknown recv_type, mwifiex_usb_recv
just return -1 without restoring the skb. Next time
mwifiex_usb_rx_complete is invoked with the same skb,
calling skb_put causes skb_over_panic.
The bug is triggerable with a compromised/malfunctioning
usb device. After applying the patch, skb_over_panic
no longer shows up with the same input.
Attached is the panic report from fuzzing.
skbuff: skb_over_panic: text:000000003bf1b5fa
len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8
tail:0x844 end:0x840 dev:<NULL>
kernel BUG at net/core/skbuff.c:109!
invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60
RIP: 0010:skb_panic+0x15f/0x161
Call Trace:
<IRQ>
? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
skb_put.cold+0x24/0x24
mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __hrtimer_run_queues+0x316/0x740
? __usb_hcd_giveback_urb+0x380/0x380
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
irq_exit+0x114/0x140
smp_apic_timer_interrupt+0xde/0x380
apic_timer_interrupt+0xf/0x20
</IRQ>
Reported-by: Brendan Dolan-Gavitt <[email protected]>
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/usb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index 9736aa0ab7fd4..8f01fcbe93961 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -130,7 +130,8 @@ static int mwifiex_usb_recv(struct mwifiex_adapter *adapter,
default:
mwifiex_dbg(adapter, ERROR,
"unknown recv_type %#x\n", recv_type);
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
break;
case MWIFIEX_USB_EP_DATA:
--
2.34.1
From: Neil Armstrong <[email protected]>
[ Upstream commit 3f2532d65a571ca02258b547b5b68ab2e9406fdb ]
The current ELD handling takes the internal connector ELD buffer and
shares it to the I2S and AHB sub-driver.
But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created
elsewhere (or not), and an eventual connector is known only
if the bridge chain up to a connector is enabled.
The current dw-hdmi code gets the current connector from
atomic_enable() so use the already stored connector pointer and
replace the buffer pointer with a callback returning the current
connector ELD buffer.
Since a connector is not always available, either pass an empty
ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld()
in AHB driver.
Reported-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
[narmstrong: fixed typo in commit log]
Acked-by: Jernej Skrabec <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c | 10 +++++++---
drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h | 4 ++--
drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 ++++++++-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 12 ++++++++++--
4 files changed, 27 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
index d0db1acf11d73..7d2ed0ed2fe26 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
@@ -320,13 +320,17 @@ static int dw_hdmi_open(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_dw_hdmi *dw = substream->private_data;
void __iomem *base = dw->data.base;
+ u8 *eld;
int ret;
runtime->hw = dw_hdmi_hw;
- ret = snd_pcm_hw_constraint_eld(runtime, dw->data.eld);
- if (ret < 0)
- return ret;
+ eld = dw->data.get_eld(dw->data.hdmi);
+ if (eld) {
+ ret = snd_pcm_hw_constraint_eld(runtime, eld);
+ if (ret < 0)
+ return ret;
+ }
ret = snd_pcm_limit_hw_rates(runtime);
if (ret < 0)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
index cb07dc0da5a70..f72d27208ebef 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
@@ -9,15 +9,15 @@ struct dw_hdmi_audio_data {
void __iomem *base;
int irq;
struct dw_hdmi *hdmi;
- u8 *eld;
+ u8 *(*get_eld)(struct dw_hdmi *hdmi);
};
struct dw_hdmi_i2s_audio_data {
struct dw_hdmi *hdmi;
- u8 *eld;
void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
u8 (*read)(struct dw_hdmi *hdmi, int offset);
+ u8 *(*get_eld)(struct dw_hdmi *hdmi);
};
#endif
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index feb04f127b550..f50b47ac11a82 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -135,8 +135,15 @@ static int dw_hdmi_i2s_get_eld(struct device *dev, void *data, uint8_t *buf,
size_t len)
{
struct dw_hdmi_i2s_audio_data *audio = data;
+ u8 *eld;
+
+ eld = audio->get_eld(audio->hdmi);
+ if (eld)
+ memcpy(buf, eld, min_t(size_t, MAX_ELD_BYTES, len));
+ else
+ /* Pass en empty ELD if connector not available */
+ memset(buf, 0, len);
- memcpy(buf, audio->eld, min_t(size_t, MAX_ELD_BYTES, len));
return 0;
}
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index f08d0fded61f7..e1211a5b334ba 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -757,6 +757,14 @@ static void hdmi_enable_audio_clk(struct dw_hdmi *hdmi, bool enable)
hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
}
+static u8 *hdmi_audio_get_eld(struct dw_hdmi *hdmi)
+{
+ if (!hdmi->curr_conn)
+ return NULL;
+
+ return hdmi->curr_conn->eld;
+}
+
static void dw_hdmi_ahb_audio_enable(struct dw_hdmi *hdmi)
{
hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n);
@@ -3431,7 +3439,7 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
audio.base = hdmi->regs;
audio.irq = irq;
audio.hdmi = hdmi;
- audio.eld = hdmi->connector.eld;
+ audio.get_eld = hdmi_audio_get_eld;
hdmi->enable_audio = dw_hdmi_ahb_audio_enable;
hdmi->disable_audio = dw_hdmi_ahb_audio_disable;
@@ -3444,7 +3452,7 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
struct dw_hdmi_i2s_audio_data audio;
audio.hdmi = hdmi;
- audio.eld = hdmi->connector.eld;
+ audio.get_eld = hdmi_audio_get_eld;
audio.write = hdmi_writeb;
audio.read = hdmi_readb;
hdmi->enable_audio = dw_hdmi_i2s_audio_enable;
--
2.34.1
From: Jingwen Chen <[email protected]>
[ Upstream commit 948e7ce01413b71395723aaf846015062aea3a43 ]
[Why]
gmc bo will be pinned during loading amdgpu and reset in SRIOV while
only unpinned in unload amdgpu
[How]
add amdgpu_in_reset and sriov judgement to skip pin bo
v2: fix wrong judgement
Signed-off-by: Jingwen Chen <[email protected]>
Reviewed-by: Horace Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 4 ++++
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
index e47104a1f5596..3c01be6610144 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
@@ -1021,10 +1021,14 @@ static int gmc_v10_0_gart_enable(struct amdgpu_device *adev)
return -EINVAL;
}
+ if (amdgpu_sriov_vf(adev) && amdgpu_in_reset(adev))
+ goto skip_pin_bo;
+
r = amdgpu_gart_table_vram_pin(adev);
if (r)
return r;
+skip_pin_bo:
r = adev->gfxhub.funcs->gart_enable(adev);
if (r)
return r;
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
index 5551359d5dfdc..b5d93247237b1 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
@@ -1708,10 +1708,14 @@ static int gmc_v9_0_gart_enable(struct amdgpu_device *adev)
return -EINVAL;
}
+ if (amdgpu_sriov_vf(adev) && amdgpu_in_reset(adev))
+ goto skip_pin_bo;
+
r = amdgpu_gart_table_vram_pin(adev);
if (r)
return r;
+skip_pin_bo:
r = adev->gfxhub.funcs->gart_enable(adev);
if (r)
return r;
--
2.34.1
From: Mario Limonciello <[email protected]>
[ Upstream commit 2aeca6bd02776d7f56a49a32be0dd184f204d888 ]
As this is a static check, it should be based upon what is currently
present on the system. This makes probeing more deterministic.
While local APIC flags field (lapic_flags) of cpu core in MADT table is
0, then the cpu core won't be enabled. In this case, _CPC won't be found
in this core, and return back to _CPC invalid with walking through
possible cpus (include disable cpus). This is not expected, so switch to
check present CPUs instead.
Reported-by: Jinzhou Su <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/cppc_acpi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 3fbb17ecce2d5..6fe28a2d387bd 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -411,7 +411,7 @@ bool acpi_cpc_valid(void)
struct cpc_desc *cpc_ptr;
int cpu;
- for_each_possible_cpu(cpu) {
+ for_each_present_cpu(cpu) {
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
if (!cpc_ptr)
return false;
--
2.34.1
From: Zongmin Zhou <[email protected]>
[ Upstream commit 11544d77e3974924c5a9c8a8320b996a3e9b2f8b ]
Some boards(like RX550) seem to have garbage in the upper
16 bits of the vram size register. Check for
this and clamp the size properly. Fixes
boards reporting bogus amounts of vram.
after add this patch,the maximum GPU VRAM size is 64GB,
otherwise only 64GB vram size will be used.
Signed-off-by: Zongmin Zhou<[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
index 492ebed2915be..63b890f1e8afb 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -515,10 +515,10 @@ static void gmc_v8_0_mc_program(struct amdgpu_device *adev)
static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
{
int r;
+ u32 tmp;
adev->gmc.vram_width = amdgpu_atombios_get_vram_width(adev);
if (!adev->gmc.vram_width) {
- u32 tmp;
int chansize, numchan;
/* Get VRAM informations */
@@ -562,8 +562,15 @@ static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
adev->gmc.vram_width = numchan * chansize;
}
/* size in MB on si */
- adev->gmc.mc_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
- adev->gmc.real_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+ tmp = RREG32(mmCONFIG_MEMSIZE);
+ /* some boards may have garbage in the upper 16 bits */
+ if (tmp & 0xffff0000) {
+ DRM_INFO("Probable bad vram size: 0x%08x\n", tmp);
+ if (tmp & 0xffff)
+ tmp &= 0xffff;
+ }
+ adev->gmc.mc_vram_size = tmp * 1024ULL * 1024ULL;
+ adev->gmc.real_vram_size = adev->gmc.mc_vram_size;
if (!(adev->flags & AMD_IS_APU)) {
r = amdgpu_device_resize_fb_bar(adev);
--
2.34.1
From: Marina Nikolic <[email protected]>
[ Upstream commit 11c9cc95f818f0f187e9b579a7f136f532b42445 ]
== Description ==
Setting values of pm attributes through sysfs
should not be allowed in SRIOV mode.
These calls will not be processed by FW anyway,
but error handling on sysfs level should be improved.
== Changes ==
This patch prohibits performing of all set commands
in SRIOV mode on sysfs level.
It offers better error handling as calls that are
not allowed will not be propagated further.
== Test ==
Writing to any sysfs file in passthrough mode will succeed.
Writing to any sysfs file in ONEVF mode will yield error:
"calling process does not have sufficient permission to execute a command".
Signed-off-by: Marina Nikolic <[email protected]>
Acked-by: Evan Quan <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
index 249cb0aeb5ae4..32a0fd5e84b73 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
@@ -2117,6 +2117,12 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_
}
}
+ /* setting should not be allowed from VF */
+ if (amdgpu_sriov_vf(adev)) {
+ dev_attr->attr.mode &= ~S_IWUGO;
+ dev_attr->store = NULL;
+ }
+
#undef DEVICE_ATTR_IS
return 0;
--
2.34.1
From: Borislav Petkov <[email protected]>
[ Upstream commit 3c7ce80a818fa7950be123cac80cd078e5ac1013 ]
And allow instrumentation inside it because it does calls to other
facilities which will not be tagged noinstr.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index c8d121085c8f7..c5a1022463bcc 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -295,11 +295,17 @@ static void wait_for_panic(void)
panic("Panicing machine check CPU died");
}
-static void mce_panic(const char *msg, struct mce *final, char *exp)
+static noinstr void mce_panic(const char *msg, struct mce *final, char *exp)
{
- int apei_err = 0;
struct llist_node *pending;
struct mce_evt_llist *l;
+ int apei_err = 0;
+
+ /*
+ * Allow instrumentation around external facilities usage. Not that it
+ * matters a whole lot since the machine is going to panic anyway.
+ */
+ instrumentation_begin();
if (!fake_panic) {
/*
@@ -314,7 +320,7 @@ static void mce_panic(const char *msg, struct mce *final, char *exp)
} else {
/* Don't log too much for fake panic */
if (atomic_inc_return(&mce_fake_panicked) > 1)
- return;
+ goto out;
}
pending = mce_gen_pool_prepare_records();
/* First print corrected ones that are still unlogged */
@@ -352,6 +358,9 @@ static void mce_panic(const char *msg, struct mce *final, char *exp)
panic(msg);
} else
pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg);
+
+out:
+ instrumentation_end();
}
/* Support code for software error injection */
--
2.34.1
From: Rajneesh Bhardwaj <[email protected]>
[ Upstream commit fbcdbfde87509d523132b59f661a355c731139d0 ]
When an application having open file access to a node forks, its shared
mappings also get reflected in the address space of child process even
though it cannot access them with the object permissions applied. With the
existing permission checks on the gem objects, it might be reasonable to
also create the VMAs with VM_DONTCOPY flag so a user space application
doesn't need to explicitly call the madvise(addr, len, MADV_DONTFORK)
system call to prevent the pages in the mapped range to appear in the
address space of the child process. It also prevents the memory leaks
due to additional reference counts on the mapped BOs in the child
process that prevented freeing the memory in the parent for which we had
worked around earlier in the user space inside the thunk library.
Additionally, we faced this issue when using CRIU to checkpoint restore
an application that had such inherited mappings in the child which
confuse CRIU when it mmaps on restore. Having this flag set for the
render node VMAs helps. VMAs mapped via KFD already take care of this so
this is needed only for the render nodes.
To limit the impact of the change to user space consumers such as OpenGL
etc, limit it to KFD BOs only.
Acked-by: Felix Kuehling <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: David Yat Sin <[email protected]>
Signed-off-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
index a1e63ba4c54a5..630dc99e49086 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
@@ -264,6 +264,9 @@ static int amdgpu_gem_object_mmap(struct drm_gem_object *obj, struct vm_area_str
!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
vma->vm_flags &= ~VM_MAYWRITE;
+ if (bo->kfd_bo)
+ vma->vm_flags |= VM_DONTCOPY;
+
return drm_gem_ttm_mmap(obj, vma);
}
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 6518f83ffa51131daaf439b66094f684da3fb0ae ]
When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.
Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 2206f66f69940..b7f7b9c5b670c 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1597,15 +1597,8 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
* else from proceeding if the module fails to load
* or hangs loading.
*/
- if (load_module) {
+ if (load_module)
request_module("%s", op->name);
-#ifdef CONFIG_IWLWIFI_OPMODE_MODULAR
- if (err)
- IWL_ERR(drv,
- "failed to load module %s (error %d), is dynamic loading enabled?\n",
- op->name, err);
-#endif
- }
failure = false;
goto free;
--
2.34.1
From: Iwona Winiarska <[email protected]>
[ Upstream commit ab39d6988dd53f354130438d8afa5596a2440fed ]
The gpio-aspeed-sgpio driver implements an irq_chip which need to be
invoked from hardirq context. Since spin_lock() can sleep with
PREEMPT_RT, it is no longer legal to invoke it while interrupts are
disabled.
This also causes lockdep to complain about:
[ 25.919465] [ BUG: Invalid wait context ]
because aspeed_sgpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-aspeed-sgpio.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c
index b3a9b8488f11d..454cefbeecf0e 100644
--- a/drivers/gpio/gpio-aspeed-sgpio.c
+++ b/drivers/gpio/gpio-aspeed-sgpio.c
@@ -31,7 +31,7 @@ struct aspeed_sgpio {
struct gpio_chip chip;
struct irq_chip intc;
struct clk *pclk;
- spinlock_t lock;
+ raw_spinlock_t lock;
void __iomem *base;
int irq;
};
@@ -173,12 +173,12 @@ static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
enum aspeed_sgpio_reg reg;
int rc = 0;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
reg = aspeed_sgpio_is_input(offset) ? reg_val : reg_rdata;
rc = !!(ioread32(bank_reg(gpio, bank, reg)) & GPIO_BIT(offset));
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
@@ -215,11 +215,11 @@ static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val)
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
unsigned long flags;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
sgpio_set_value(gc, offset, val);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static int aspeed_sgpio_dir_in(struct gpio_chip *gc, unsigned int offset)
@@ -236,9 +236,9 @@ static int aspeed_sgpio_dir_out(struct gpio_chip *gc, unsigned int offset, int v
/* No special action is required for setting the direction; we'll
* error-out in sgpio_set_value if this isn't an output GPIO */
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
rc = sgpio_set_value(gc, offset, val);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
@@ -277,11 +277,11 @@ static void aspeed_sgpio_irq_ack(struct irq_data *d)
status_addr = bank_reg(gpio, bank, reg_irq_status);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
iowrite32(bit, status_addr);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static void aspeed_sgpio_irq_set_mask(struct irq_data *d, bool set)
@@ -296,7 +296,7 @@ static void aspeed_sgpio_irq_set_mask(struct irq_data *d, bool set)
irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
addr = bank_reg(gpio, bank, reg_irq_enable);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
reg = ioread32(addr);
if (set)
@@ -306,7 +306,7 @@ static void aspeed_sgpio_irq_set_mask(struct irq_data *d, bool set)
iowrite32(reg, addr);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static void aspeed_sgpio_irq_mask(struct irq_data *d)
@@ -355,7 +355,7 @@ static int aspeed_sgpio_set_type(struct irq_data *d, unsigned int type)
return -EINVAL;
}
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
addr = bank_reg(gpio, bank, reg_irq_type0);
reg = ioread32(addr);
@@ -372,7 +372,7 @@ static int aspeed_sgpio_set_type(struct irq_data *d, unsigned int type)
reg = (reg & ~bit) | type2;
iowrite32(reg, addr);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
irq_set_handler_locked(d, handler);
@@ -467,7 +467,7 @@ static int aspeed_sgpio_reset_tolerance(struct gpio_chip *chip,
reg = bank_reg(gpio, to_bank(offset), reg_tolerance);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
val = readl(reg);
@@ -478,7 +478,7 @@ static int aspeed_sgpio_reset_tolerance(struct gpio_chip *chip,
writel(val, reg);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
@@ -575,7 +575,7 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
iowrite32(FIELD_PREP(ASPEED_SGPIO_CLK_DIV_MASK, sgpio_clk_div) | gpio_cnt_regval |
ASPEED_SGPIO_ENABLE, gpio->base + ASPEED_SGPIO_CTRL);
- spin_lock_init(&gpio->lock);
+ raw_spin_lock_init(&gpio->lock);
gpio->chip.parent = &pdev->dev;
gpio->chip.ngpio = nr_gpios * 2;
--
2.34.1
From: Borislav Petkov <[email protected]>
[ Upstream commit db6c996d6ce45dfb44891f0824a65ecec216f47a ]
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0x681: call to mce_read_aux() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index c37a0bcf2744b..e23e74e2f928d 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -691,7 +691,7 @@ static struct notifier_block mce_default_nb = {
/*
* Read ADDR and MISC registers.
*/
-static void mce_read_aux(struct mce *m, int i)
+static noinstr void mce_read_aux(struct mce *m, int i)
{
if (m->status & MCI_STATUS_MISCV)
m->misc = mce_rdmsrl(msr_ops.misc(i));
--
2.34.1
From: Tetsuo Handa <[email protected]>
[ Upstream commit b0ec7e55fce65f125bd1d7f02e2dc4de62abee34 ]
syzbot is reporting lockdep warning followed by kernel panic at
ath9k_htc_rxep() [1], for ath9k_htc_rxep() depends on ath9k_rx_init()
being already completed.
Since ath9k_htc_rxep() is set by ath9k_htc_connect_svc(WMI_BEACON_SVC)
from ath9k_init_htc_services(), it is possible that ath9k_htc_rxep() is
called via timer interrupt before ath9k_rx_init() from ath9k_init_device()
is called.
Since we can't call ath9k_init_device() before ath9k_init_htc_services(),
let's hold ath9k_htc_rxep() no-op until ath9k_rx_init() completes.
Link: https://syzkaller.appspot.com/bug?extid=4d2d56175b934b9a7bf9 [1]
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Tested-by: syzbot <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc.h | 1 +
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 8 ++++++++
2 files changed, 9 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 0a1634238e673..4f71e962279af 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -281,6 +281,7 @@ struct ath9k_htc_rxbuf {
struct ath9k_htc_rx {
struct list_head rxbuf;
spinlock_t rxbuflock;
+ bool initialized;
};
#define ATH9K_HTC_TX_CLEANUP_INTERVAL 50 /* ms */
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 8e69e8989f6d3..e7a21eaf3a68d 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -1130,6 +1130,10 @@ void ath9k_htc_rxep(void *drv_priv, struct sk_buff *skb,
struct ath9k_htc_rxbuf *rxbuf = NULL, *tmp_buf = NULL;
unsigned long flags;
+ /* Check if ath9k_rx_init() completed. */
+ if (!data_race(priv->rx.initialized))
+ goto err;
+
spin_lock_irqsave(&priv->rx.rxbuflock, flags);
list_for_each_entry(tmp_buf, &priv->rx.rxbuf, list) {
if (!tmp_buf->in_process) {
@@ -1185,6 +1189,10 @@ int ath9k_rx_init(struct ath9k_htc_priv *priv)
list_add_tail(&rxbuf->list, &priv->rx.rxbuf);
}
+ /* Allow ath9k_htc_rxep() to operate. */
+ smp_wmb();
+ priv->rx.initialized = true;
+
return 0;
err:
--
2.34.1
From: Borislav Petkov <[email protected]>
[ Upstream commit b4813539d37fa31fed62cdfab7bd2dd8929c5b2e ]
It is called by the #MC handler which is noinstr.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xbd6: call to memset() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index c5a1022463bcc..c37a0bcf2744b 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1081,10 +1081,13 @@ static int mce_start(int *no_way_out)
* Synchronize between CPUs after main scanning loop.
* This invokes the bulk of the Monarch processing.
*/
-static int mce_end(int order)
+static noinstr int mce_end(int order)
{
- int ret = -1;
u64 timeout = (u64)mca_cfg.monarch_timeout * NSEC_PER_USEC;
+ int ret = -1;
+
+ /* Allow instrumentation around external facilities. */
+ instrumentation_begin();
if (!timeout)
goto reset;
@@ -1128,7 +1131,8 @@ static int mce_end(int order)
/*
* Don't reset anything. That's done by the Monarch.
*/
- return 0;
+ ret = 0;
+ goto out;
}
/*
@@ -1144,6 +1148,10 @@ reset:
* Let others run again.
*/
atomic_set(&mce_executing, 0);
+
+out:
+ instrumentation_end();
+
return ret;
}
--
2.34.1
From: Avraham Stern <[email protected]>
[ Upstream commit f0337cb48f3bf5f0bbccc985d8a0a8c4aa4934b7 ]
When IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD is set, removing a time event
always tries to cancel session protection. However, AUX ROC does
not use session protection so it was never removed. As a result,
if the driver tries to allocate another AUX ROC event right after
cancelling the first one, it will fail with a warning.
In addition, the time event data passed to iwl_mvm_remove_aux_roc_te()
is incorrect. Fix it.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.915e1f69f062.Id837e917f1c2beaca7c1eb33333d622548918a76@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index b8c645b9880fc..ab06dcda1462a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -696,11 +696,14 @@ static bool __iwl_mvm_remove_time_event(struct iwl_mvm *mvm,
iwl_mvm_te_clear_data(mvm, te_data);
spin_unlock_bh(&mvm->time_event_lock);
- /* When session protection is supported, the te_data->id field
+ /* When session protection is used, the te_data->id field
* is reused to save session protection's configuration.
+ * For AUX ROC, HOT_SPOT_CMD is used and the te_data->id field is set
+ * to HOT_SPOT_CMD.
*/
if (fw_has_capa(&mvm->fw->ucode_capa,
- IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD)) {
+ IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD) &&
+ id != HOT_SPOT_CMD) {
if (mvmvif && id < SESSION_PROTECT_CONF_MAX_ID) {
/* Session protection is still ongoing. Cancel it */
iwl_mvm_cancel_session_protection(mvm, mvmvif, id);
@@ -1036,7 +1039,7 @@ void iwl_mvm_stop_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
iwl_mvm_p2p_roc_finished(mvm);
} else {
iwl_mvm_remove_aux_roc_te(mvm, mvmvif,
- &mvmvif->time_event_data);
+ &mvmvif->hs_time_event_data);
iwl_mvm_roc_finished(mvm);
}
--
2.34.1
From: Russell King (Oracle) <[email protected]>
[ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ]
Corentin Labbe reports that the SSI 1328 does not work when allowing
the PHY to operate at gigabit speeds, but does work with the generic
PHY driver.
This appears to be because m88e1118_config_init() writes a fixed value
to the MSCR register, claiming that this is to enable 1G speeds.
However, this always sets bits 4 and 5, enabling RGMII transmit and
receive delays. The suspicion is that the original board this was
added for required the delays to make 1G speeds work.
Add the necessary configuration for RGMII delays for the 88E1118 to
bring this into line with the requirements for RGMII support, and thus
make the SSI 1328 work.
Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502.
Reported-by: Corentin Labbe <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/marvell.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1244,6 +1244,12 @@ static int m88e1118_config_init(struct p
if (err < 0)
return err;
+ if (phy_interface_is_rgmii(phydev)) {
+ err = m88e1121_config_aneg_rgmii_delays(phydev);
+ if (err < 0)
+ return err;
+ }
+
/* Adjust LED Control */
if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
err = phy_write(phydev, 0x10, 0x1100);
From: Ben Greear <[email protected]>
[ Upstream commit d943fdad7589653065be0e20aadc6dff37725ed4 ]
Similar to the same bug in ath10k, a napi disable w/out it being enabled
will hang forever. I believe I saw this while trying rmmod after driver
had some failure on startup. Fix it by keeping state on whether napi is
enabled or not.
And, remove un-used napi pointer in ath11k driver base struct.
Signed-off-by: Ben Greear <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/ahb.c | 12 +++++++++---
drivers/net/wireless/ath/ath11k/core.h | 2 +-
drivers/net/wireless/ath/ath11k/pci.c | 12 +++++++++---
3 files changed, 19 insertions(+), 7 deletions(-)
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -175,8 +175,11 @@ static void __ath11k_ahb_ext_irq_disable
ath11k_ahb_ext_grp_disable(irq_grp);
- napi_synchronize(&irq_grp->napi);
- napi_disable(&irq_grp->napi);
+ if (irq_grp->napi_enabled) {
+ napi_synchronize(&irq_grp->napi);
+ napi_disable(&irq_grp->napi);
+ irq_grp->napi_enabled = false;
+ }
}
}
@@ -300,7 +303,10 @@ static void ath11k_ahb_ext_irq_enable(st
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
- napi_enable(&irq_grp->napi);
+ if (!irq_grp->napi_enabled) {
+ napi_enable(&irq_grp->napi);
+ irq_grp->napi_enabled = true;
+ }
ath11k_ahb_ext_grp_enable(irq_grp);
}
}
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -137,6 +137,7 @@ struct ath11k_ext_irq_grp {
u32 num_irq;
u32 grp_id;
u64 timestamp;
+ bool napi_enabled;
struct napi_struct napi;
struct net_device napi_ndev;
};
@@ -706,7 +707,6 @@ struct ath11k_base {
u32 wlan_init_status;
int irq_num[ATH11K_IRQ_NUM_MAX];
struct ath11k_ext_irq_grp ext_irq_grp[ATH11K_EXT_IRQ_GRP_NUM_MAX];
- struct napi_struct *napi;
struct ath11k_targ_cap target_caps;
u32 ext_service_bitmap[WMI_SERVICE_EXT_BM_SIZE];
bool pdevs_macaddr_valid;
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -632,8 +632,11 @@ static void __ath11k_pci_ext_irq_disable
ath11k_pci_ext_grp_disable(irq_grp);
- napi_synchronize(&irq_grp->napi);
- napi_disable(&irq_grp->napi);
+ if (irq_grp->napi_enabled) {
+ napi_synchronize(&irq_grp->napi);
+ napi_disable(&irq_grp->napi);
+ irq_grp->napi_enabled = false;
+ }
}
}
@@ -652,7 +655,10 @@ static void ath11k_pci_ext_irq_enable(st
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
- napi_enable(&irq_grp->napi);
+ if (!irq_grp->napi_enabled) {
+ napi_enable(&irq_grp->napi);
+ irq_grp->napi_enabled = true;
+ }
ath11k_pci_ext_grp_enable(irq_grp);
}
}
From: Hector Martin <[email protected]>
[ Upstream commit 189f1d9bc3a5ea3e442e119e4a5deda63da8c462 ]
This is required on some Apple ARM64 laptops using this controller.
As is typical on DT platforms, pull these quirks from the device tree
using the standard mmc bindings.
See Documentation/devicetree/bindings/mmc/mmc-controller.yaml
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Hector Martin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-pci-gli.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 4fd99c1e82ba3..ad50f16658fe2 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -12,6 +12,7 @@
#include <linux/pci.h>
#include <linux/mmc/mmc.h>
#include <linux/delay.h>
+#include <linux/of.h>
#include "sdhci.h"
#include "sdhci-pci.h"
#include "cqhci.h"
@@ -116,6 +117,8 @@
#define PCI_GLI_9755_PECONF 0x44
#define PCI_GLI_9755_LFCLK GENMASK(14, 12)
#define PCI_GLI_9755_DMACLK BIT(29)
+#define PCI_GLI_9755_INVERT_CD BIT(30)
+#define PCI_GLI_9755_INVERT_WP BIT(31)
#define PCI_GLI_9755_CFG2 0x48
#define PCI_GLI_9755_CFG2_L1DLY GENMASK(28, 24)
@@ -570,6 +573,14 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
gl9755_wt_on(pdev);
pci_read_config_dword(pdev, PCI_GLI_9755_PECONF, &value);
+ /*
+ * Apple ARM64 platforms using these chips may have
+ * inverted CD/WP detection.
+ */
+ if (of_property_read_bool(pdev->dev.of_node, "cd-inverted"))
+ value |= PCI_GLI_9755_INVERT_CD;
+ if (of_property_read_bool(pdev->dev.of_node, "wp-inverted"))
+ value |= PCI_GLI_9755_INVERT_WP;
value &= ~PCI_GLI_9755_LFCLK;
value &= ~PCI_GLI_9755_DMACLK;
pci_write_config_dword(pdev, PCI_GLI_9755_PECONF, value);
--
2.34.1
From: Konrad Dybcio <[email protected]>
[ Upstream commit 14e2976fbabdacb01335d7f91eeebbc89c67ddb1 ]
The RPMh regulator driver is much newer and gets more attention, which in
consequence makes it do a few things better. Update qcom_smd-regulator's
probe function to mimic what rpmh-regulator does to address a couple of
issues:
- Probe defer now works correctly, before it used to, well,
kinda just die.. This fixes reliable probing on (at least) PM8994,
because Linux apparently cannot deal with supply map dependencies yet..
- Regulator data is now matched more sanely: regulator data is matched
against each individual regulator node name and throwing an -EINVAL if
data is missing, instead of just assuming everything is fine and
iterating over all subsequent array members.
- status = "disabled" will now work for disabling individual regulators in
DT. Previously it didn't seem to do much if anything at all.
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/qcom_smd-regulator.c | 100 +++++++++++++++++--------
1 file changed, 70 insertions(+), 30 deletions(-)
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 198fcc6551f6d..8e077792bddd9 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -9,6 +9,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/soc/qcom/smd-rpm.h>
struct qcom_rpm_reg {
@@ -1190,52 +1191,91 @@ static const struct of_device_id rpm_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
-static int rpm_reg_probe(struct platform_device *pdev)
+/**
+ * rpm_regulator_init_vreg() - initialize all attributes of a qcom_smd-regulator
+ * @vreg: Pointer to the individual qcom_smd-regulator resource
+ * @dev: Pointer to the top level qcom_smd-regulator PMIC device
+ * @node: Pointer to the individual qcom_smd-regulator resource
+ * device node
+ * @rpm: Pointer to the rpm bus node
+ * @pmic_rpm_data: Pointer to a null-terminated array of qcom_smd-regulator
+ * resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpm_regulator_init_vreg(struct qcom_rpm_reg *vreg, struct device *dev,
+ struct device_node *node, struct qcom_smd_rpm *rpm,
+ const struct rpm_regulator_data *pmic_rpm_data)
{
- const struct rpm_regulator_data *reg;
- const struct of_device_id *match;
- struct regulator_config config = { };
+ struct regulator_config config = {};
+ const struct rpm_regulator_data *rpm_data;
struct regulator_dev *rdev;
+ int ret;
+
+ for (rpm_data = pmic_rpm_data; rpm_data->name; rpm_data++)
+ if (of_node_name_eq(node, rpm_data->name))
+ break;
+
+ if (!rpm_data->name) {
+ dev_err(dev, "Unknown regulator %pOFn\n", node);
+ return -EINVAL;
+ }
+
+ vreg->dev = dev;
+ vreg->rpm = rpm;
+ vreg->type = rpm_data->type;
+ vreg->id = rpm_data->id;
+
+ memcpy(&vreg->desc, rpm_data->desc, sizeof(vreg->desc));
+ vreg->desc.name = rpm_data->name;
+ vreg->desc.supply_name = rpm_data->supply;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.of_match = rpm_data->name;
+
+ config.dev = dev;
+ config.of_node = node;
+ config.driver_data = vreg;
+
+ rdev = devm_regulator_register(dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(dev, "%pOFn: devm_regulator_register() failed, ret=%d\n", node, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct rpm_regulator_data *vreg_data;
+ struct device_node *node;
struct qcom_rpm_reg *vreg;
struct qcom_smd_rpm *rpm;
+ int ret;
rpm = dev_get_drvdata(pdev->dev.parent);
if (!rpm) {
- dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ dev_err(&pdev->dev, "Unable to retrieve handle to rpm\n");
return -ENODEV;
}
- match = of_match_device(rpm_of_match, &pdev->dev);
- if (!match) {
- dev_err(&pdev->dev, "failed to match device\n");
+ vreg_data = of_device_get_match_data(dev);
+ if (!vreg_data)
return -ENODEV;
- }
- for (reg = match->data; reg->name; reg++) {
+ for_each_available_child_of_node(dev->of_node, node) {
vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
if (!vreg)
return -ENOMEM;
- vreg->dev = &pdev->dev;
- vreg->type = reg->type;
- vreg->id = reg->id;
- vreg->rpm = rpm;
-
- memcpy(&vreg->desc, reg->desc, sizeof(vreg->desc));
-
- vreg->desc.id = -1;
- vreg->desc.owner = THIS_MODULE;
- vreg->desc.type = REGULATOR_VOLTAGE;
- vreg->desc.name = reg->name;
- vreg->desc.supply_name = reg->supply;
- vreg->desc.of_match = reg->name;
-
- config.dev = &pdev->dev;
- config.driver_data = vreg;
- rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
- if (IS_ERR(rdev)) {
- dev_err(&pdev->dev, "failed to register %s\n", reg->name);
- return PTR_ERR(rdev);
+ ret = rpm_regulator_init_vreg(vreg, dev, node, rpm, vreg_data);
+
+ if (ret < 0) {
+ of_node_put(node);
+ return ret;
}
}
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 077b7320942b64b0da182aefd83c374462a65535 ]
The function names init_registers() and restore_registers() are used
in several net/ethernet/ and gpu/drm/ drivers for other purposes (not
calls to UML functions), so rename them.
This fixes multiple build errors.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: [email protected]
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/include/shared/registers.h | 4 ++--
arch/um/os-Linux/registers.c | 4 ++--
arch/um/os-Linux/start_up.c | 2 +-
arch/x86/um/syscalls_64.c | 3 ++-
4 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h
index 0c50fa6e8a55b..fbb709a222839 100644
--- a/arch/um/include/shared/registers.h
+++ b/arch/um/include/shared/registers.h
@@ -16,8 +16,8 @@ extern int restore_fp_registers(int pid, unsigned long *fp_regs);
extern int save_fpx_registers(int pid, unsigned long *fp_regs);
extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
extern int save_registers(int pid, struct uml_pt_regs *regs);
-extern int restore_registers(int pid, struct uml_pt_regs *regs);
-extern int init_registers(int pid);
+extern int restore_pid_registers(int pid, struct uml_pt_regs *regs);
+extern int init_pid_registers(int pid);
extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
extern int get_fp_registers(int pid, unsigned long *regs);
diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c
index 2d9270508e156..b123955be7acc 100644
--- a/arch/um/os-Linux/registers.c
+++ b/arch/um/os-Linux/registers.c
@@ -21,7 +21,7 @@ int save_registers(int pid, struct uml_pt_regs *regs)
return 0;
}
-int restore_registers(int pid, struct uml_pt_regs *regs)
+int restore_pid_registers(int pid, struct uml_pt_regs *regs)
{
int err;
@@ -36,7 +36,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs)
static unsigned long exec_regs[MAX_REG_NR];
static unsigned long exec_fp_regs[FP_SIZE];
-int init_registers(int pid)
+int init_pid_registers(int pid)
{
int err;
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 8a72c99994eb1..e3ee4db58b40d 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -368,7 +368,7 @@ void __init os_early_checks(void)
check_tmpexec();
pid = start_ptraced_child();
- if (init_registers(pid))
+ if (init_pid_registers(pid))
fatal("Failed to initialize default registers");
stop_ptraced_child(pid, 1, 1);
}
diff --git a/arch/x86/um/syscalls_64.c b/arch/x86/um/syscalls_64.c
index 58f51667e2e4b..8249685b40960 100644
--- a/arch/x86/um/syscalls_64.c
+++ b/arch/x86/um/syscalls_64.c
@@ -11,6 +11,7 @@
#include <linux/uaccess.h>
#include <asm/prctl.h> /* XXX This should get the constants from libc */
#include <os.h>
+#include <registers.h>
long arch_prctl(struct task_struct *task, int option,
unsigned long __user *arg2)
@@ -35,7 +36,7 @@ long arch_prctl(struct task_struct *task, int option,
switch (option) {
case ARCH_SET_FS:
case ARCH_SET_GS:
- ret = restore_registers(pid, ¤t->thread.regs.regs);
+ ret = restore_pid_registers(pid, ¤t->thread.regs.regs);
if (ret)
return ret;
break;
--
2.34.1
From: Changcheng Deng <[email protected]>
[ Upstream commit 92c550f9ffd2884bb5def52b5c0485a35e452784 ]
do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Changcheng Deng <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/cpr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index 4ce8e816154f9..84dd93472a252 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -1010,7 +1010,7 @@ static int cpr_interpolate(const struct corner *corner, int step_volt,
return corner->uV;
temp = f_diff * (uV_high - uV_low);
- do_div(temp, f_high - f_low);
+ temp = div64_ul(temp, f_high - f_low);
/*
* max_volt_scale has units of uV/MHz while freq values
--
2.34.1
From: Julia Lawall <[email protected]>
[ Upstream commit f6e82647ff71d427d4148964b71f239fba9d7937 ]
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e;
local idexpression n;
@@
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index 15396333a90bd..a4b020e4b6af0 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -214,6 +214,7 @@ void hlwd_pic_probe(void)
irq_set_chained_handler(cascade_virq,
hlwd_pic_irq_cascade);
hlwd_irq_host = host;
+ of_node_put(np);
break;
}
}
--
2.34.1
From: Paul Moore <[email protected]>
[ Upstream commit 8f110f530635af44fff1f4ee100ecef0bac62510 ]
Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure. The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.
This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.
Reported-by: Gaosheng Cui <[email protected]>
Tested-by: Gaosheng Cui <[email protected]>
Reviewed-by: Richard Guy Briggs <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/audit.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/kernel/audit.c b/kernel/audit.c
index 4cebadb5f30db..eab7282668ab9 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1540,6 +1540,20 @@ static void audit_receive(struct sk_buff *skb)
nlh = nlmsg_next(nlh, &len);
}
audit_ctl_unlock();
+
+ /* can't block with the ctrl lock, so penalize the sender now */
+ if (audit_backlog_limit &&
+ (skb_queue_len(&audit_queue) > audit_backlog_limit)) {
+ DECLARE_WAITQUEUE(wait, current);
+
+ /* wake kauditd to try and flush the queue */
+ wake_up_interruptible(&kauditd_wait);
+
+ add_wait_queue_exclusive(&audit_backlog_wait, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(audit_backlog_wait_time);
+ remove_wait_queue(&audit_backlog_wait, &wait);
+ }
}
/* Log information about who is connecting to the audit multicast socket */
@@ -1824,7 +1838,9 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
* task_tgid_vnr() since auditd_pid is set in audit_receive_msg()
* using a PID anchored in the caller's namespace
* 2. generator holding the audit_cmd_mutex - we don't want to block
- * while holding the mutex */
+ * while holding the mutex, although we do penalize the sender
+ * later in audit_receive() when it is safe to block
+ */
if (!(auditd_test_task(current) || audit_ctl_owner_current())) {
long stime = audit_backlog_wait_time;
--
2.34.1
From: Julia Lawall <[email protected]>
[ Upstream commit 7d405a939ca960162eb30c1475759cb2fdf38f8c ]
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/powernv/opal-lpc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index 1e5d51db40f84..5390c888db162 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -396,6 +396,7 @@ void __init opal_lpc_init(void)
if (!of_get_property(np, "primary", NULL))
continue;
opal_lpc_chip_id = of_get_ibm_chip_id(np);
+ of_node_put(np);
break;
}
if (opal_lpc_chip_id < 0)
--
2.34.1
From: Ye Guojin <[email protected]>
[ Upstream commit f670b274f7f6f4b2722d7f08d0fddf606a727e92 ]
This was found by coccicheck:
./sound/soc/fsl/imx-hdmi.c,209,1-7,ERROR missing put_device; call
of_find_device_by_node on line 119, but without a corresponding object
release within this function.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Ye Guojin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-hdmi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/fsl/imx-hdmi.c b/sound/soc/fsl/imx-hdmi.c
index 34a0dceae6216..ef8d7a65ebc61 100644
--- a/sound/soc/fsl/imx-hdmi.c
+++ b/sound/soc/fsl/imx-hdmi.c
@@ -145,6 +145,8 @@ static int imx_hdmi_probe(struct platform_device *pdev)
data->dai.capture_only = false;
data->dai.init = imx_hdmi_init;
+ put_device(&cpu_pdev->dev);
+
if (of_node_name_eq(cpu_np, "sai")) {
data->cpu_priv.sysclk_id[1] = FSL_SAI_CLK_MAST1;
data->cpu_priv.sysclk_id[0] = FSL_SAI_CLK_MAST1;
--
2.34.1
From: Biju Das <[email protected]>
[ Upstream commit e315b1f3a170f368da5618f8a598e68880302ed1 ]
Refactor the code so that card detect irqs are always reenabled after a
reset. This avoids doing it manually all over the code or forgetting to
do this in the future.
Reported-by: Wolfram Sang <[email protected]>
Signed-off-by: Biju Das <[email protected]>
[wsa: added a comment when 'native_hotplug' has to be set]
Signed-off-by: Wolfram Sang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/tmio_mmc_core.c | 15 +++------------
1 file changed, 3 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index e2affa52ef469..a5850d83908be 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -960,14 +960,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_OFF:
tmio_mmc_power_off(host);
/* For R-Car Gen2+, we need to reset SDHI specific SCC */
- if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) {
- host->reset(host);
-
- if (host->native_hotplug)
- tmio_mmc_enable_mmc_irqs(host,
- TMIO_STAT_CARD_REMOVE |
- TMIO_STAT_CARD_INSERT);
- }
+ if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+ tmio_mmc_reset(host);
host->set_clock(host, 0);
break;
@@ -1175,6 +1169,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
if (mmc_can_gpio_cd(mmc))
_host->ops.get_cd = mmc_gpio_get_cd;
+ /* must be set before tmio_mmc_reset() */
_host->native_hotplug = !(mmc_can_gpio_cd(mmc) ||
mmc->caps & MMC_CAP_NEEDS_POLL ||
!mmc_card_is_removable(mmc));
@@ -1295,10 +1290,6 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
if (host->clk_cache)
host->set_clock(host, host->clk_cache);
- if (host->native_hotplug)
- tmio_mmc_enable_mmc_irqs(host,
- TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
-
tmio_mmc_enable_dma(host, true);
return 0;
--
2.34.1
From: Jingwen Chen <[email protected]>
[ Upstream commit 85dfc1d692c9434c37842e610be37cd4ae4e0081 ]
[Why]
psp tmr bo will be pinned during loading amdgpu and reset in SRIOV while
only unpinned in unload amdgpu
[How]
add amdgpu_in_reset and sriov judgement to skip pin bo
v2: fix wrong judgement
Signed-off-by: Jingwen Chen <[email protected]>
Reviewed-by: Horace Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 9b41cb8c3de54..86e2090bbd6e0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -2207,12 +2207,16 @@ static int psp_hw_start(struct psp_context *psp)
return ret;
}
+ if (amdgpu_sriov_vf(adev) && amdgpu_in_reset(adev))
+ goto skip_pin_bo;
+
ret = psp_tmr_init(psp);
if (ret) {
DRM_ERROR("PSP tmr init failed!\n");
return ret;
}
+skip_pin_bo:
/*
* For ASICs with DF Cstate management centralized
* to PMFW, TMR setup should be performed after PMFW
--
2.34.1
From: Mikhail Rudenko <[email protected]>
[ Upstream commit c2611e479f5d9b05108270e1ab423955486b4457 ]
While testing Rockchip RK3399 with both ISPs enabled, a dmesg error
was observed:
```
[ 15.559141] debugfs: Directory 'rkisp1' with parent '/' already present!
```
Fix it by using the device name for the debugfs subdirectory name
instead of the driver name, thus preventing name collision.
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Mikhail Rudenko <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
index 7474150b94ed3..560f928c37520 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
@@ -426,7 +426,7 @@ static void rkisp1_debug_init(struct rkisp1_device *rkisp1)
{
struct rkisp1_debug *debug = &rkisp1->debug;
- debug->debugfs_dir = debugfs_create_dir(RKISP1_DRIVER_NAME, NULL);
+ debug->debugfs_dir = debugfs_create_dir(dev_name(rkisp1->dev), NULL);
debugfs_create_ulong("data_loss", 0444, debug->debugfs_dir,
&debug->data_loss);
debugfs_create_ulong("outform_size_err", 0444, debug->debugfs_dir,
--
2.34.1
From: Lukas Wunner <[email protected]>
[ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ]
pl010_set_termios() briefly resets the CR register to zero.
Where does this register write come from?
The PL010 driver's IRQ handler ambauart_int() originally modified the CR
register without holding the port spinlock. ambauart_set_termios() also
modified that register. To prevent concurrent read-modify-writes by the
IRQ handler and to prevent transmission while changing baudrate,
ambauart_set_termios() had to disable interrupts. That is achieved by
writing zero to the CR register.
However in 2004 the PL010 driver was amended to acquire the port
spinlock in the IRQ handler, obviating the need to disable interrupts in
->set_termios():
https://git.kernel.org/history/history/c/157c0342e591
That rendered the CR register write obsolete. Drop it.
Cc: Russell King <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Link: https://lore.kernel.org/r/fcaff16e5b1abb4cc3da5a2879ac13f278b99ed0.1641128728.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/amba-pl010.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index e744b953ca346..47654073123d6 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -446,14 +446,11 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
if ((termios->c_cflag & CREAD) == 0)
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
- /* first, disable everything */
old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
- writel(0, uap->port.membase + UART010_CR);
-
/* Set baud rate */
quot -= 1;
writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--
2.34.1
From: Mika Westerberg <[email protected]>
[ Upstream commit f3380cac0c0b3a6f49ab161e2a057c363962f48d ]
If protocol tunnels are already up when the driver is loaded, for
instance if the boot firmware implements connection manager of its own,
runtime PM reference count of the consumer devices behind the tunnel
might have been increased already before the device link is created but
the supplier device runtime PM reference count is not. This leads to a
situation where the supplier (the Thunderbolt driver) can runtime
suspend even if it should not because the corresponding protocol tunnel
needs to be up causing the devices to be removed from the corresponding
native bus.
Prevent this from happening by making both sides of the link runtime PM
active briefly. The pm_runtime_put() for the consumer (PCIe
root/downstream port, xHCI) then allows it to runtime suspend again but
keeps the supplier runtime resumed the whole time it is runtime active.
Signed-off-by: Mika Westerberg <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thunderbolt/acpi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/thunderbolt/acpi.c b/drivers/thunderbolt/acpi.c
index b67e72d5644b3..7c9597a339295 100644
--- a/drivers/thunderbolt/acpi.c
+++ b/drivers/thunderbolt/acpi.c
@@ -7,6 +7,7 @@
*/
#include <linux/acpi.h>
+#include <linux/pm_runtime.h>
#include "tb.h"
@@ -74,8 +75,18 @@ static acpi_status tb_acpi_add_link(acpi_handle handle, u32 level, void *data,
pci_pcie_type(pdev) == PCI_EXP_TYPE_DOWNSTREAM))) {
const struct device_link *link;
+ /*
+ * Make them both active first to make sure the NHI does
+ * not runtime suspend before the consumer. The
+ * pm_runtime_put() below then allows the consumer to
+ * runtime suspend again (which then allows NHI runtime
+ * suspend too now that the device link is established).
+ */
+ pm_runtime_get_sync(&pdev->dev);
+
link = device_link_add(&pdev->dev, &nhi->pdev->dev,
DL_FLAG_AUTOREMOVE_SUPPLIER |
+ DL_FLAG_RPM_ACTIVE |
DL_FLAG_PM_RUNTIME);
if (link) {
dev_dbg(&nhi->pdev->dev, "created link from %s\n",
@@ -84,6 +95,8 @@ static acpi_status tb_acpi_add_link(acpi_handle handle, u32 level, void *data,
dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n",
dev_name(&pdev->dev));
}
+
+ pm_runtime_put(&pdev->dev);
}
out_put:
--
2.34.1
From: Kieran Bingham <[email protected]>
[ Upstream commit 82ce79391d0ec25ec8aaae3c0617b71048ff0836 ]
The binding node names for the thermal zones are not successfully
validated by the dt-schemas.
Fix the validation by changing from sensor-thermalN or thermal-sensor-N
to sensorN-thermal. Provide node labels of the form sensorN_thermal to
ensure consistency with the other platform implementations.
Signed-off-by: Kieran Bingham <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77951.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77960.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 6 +++---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 4 ++--
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 10 +++++-----
9 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 6f4fffacfca21..e70aa5a087402 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -2784,7 +2784,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2799,7 +2799,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2814,7 +2814,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 0f7bdfc90a0dc..6c5694fa66900 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2629,7 +2629,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2644,7 +2644,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2659,7 +2659,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 379a1300272ba..62209ab6deb9a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -2904,7 +2904,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2919,7 +2919,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2934,7 +2934,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 1768a3e6bb8da..193d81be40fc4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -3375,7 +3375,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -3390,7 +3390,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -3405,7 +3405,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 2bd8169735d35..b526e4f0ee6a8 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -2972,7 +2972,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2987,7 +2987,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -3002,7 +3002,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 041473aa5cd09..21fc95397c3c2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -2719,7 +2719,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2734,7 +2734,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2749,7 +2749,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 08df75606430b..f9679a4dd85fa 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -2784,7 +2784,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2799,7 +2799,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2814,7 +2814,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 6347d15e66b64..21fe602bd25af 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1580,7 +1580,7 @@
};
thermal-zones {
- thermal-sensor-1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -1599,7 +1599,7 @@
};
};
- thermal-sensor-2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 631d520cebee5..26899fb768a73 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -1149,7 +1149,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -1163,7 +1163,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -1177,7 +1177,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
@@ -1191,7 +1191,7 @@
};
};
- sensor_thermal4: sensor-thermal4 {
+ sensor4_thermal: sensor4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 3>;
@@ -1205,7 +1205,7 @@
};
};
- sensor_thermal5: sensor-thermal5 {
+ sensor5_thermal: sensor5-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 4>;
--
2.34.1
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 4d3984906397581dc0ccb6a02bf16b6ff82c9192 ]
Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Reviewed-by: Aswath Govindraju <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 874cba75e9a5a..7daa280220442 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -32,7 +32,7 @@
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x1c000>;
- serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+ serdes_ln_ctrl: mux-controller@4080 {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
--
2.34.1
From: Xiongwei Song <[email protected]>
[ Upstream commit 545a32498c536ee152331cd2e7d2416aa0f20e01 ]
We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline]
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356
Modules linked in:
CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344
Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9
RSP: 0018:ffffc90023b87850 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960
R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30
FS: 0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
__get_free_pages+0x8/0x40 mm/page_alloc.c:5418
raw_cmd_copyin drivers/block/floppy.c:3113 [inline]
raw_cmd_ioctl drivers/block/floppy.c:3160 [inline]
fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528
fd_ioctl drivers/block/floppy.c:3555 [inline]
fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869
compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662
__do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Xiongwei Song <[email protected]>
Signed-off-by: Denis Efremov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/floppy.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index f50bbaba5762c..4a6a74177b3c9 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3080,6 +3080,8 @@ static void raw_cmd_free(struct floppy_raw_cmd **ptr)
}
}
+#define MAX_LEN (1UL << MAX_ORDER << PAGE_SHIFT)
+
static int raw_cmd_copyin(int cmd, void __user *param,
struct floppy_raw_cmd **rcmd)
{
@@ -3107,7 +3109,7 @@ loop:
ptr->resultcode = 0;
if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
- if (ptr->length <= 0)
+ if (ptr->length <= 0 || ptr->length >= MAX_LEN)
return -EINVAL;
ptr->kernel_data = (char *)fd_dma_mem_alloc(ptr->length);
fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit 1a68b346a2c9969c05e80a3b99a9ab160b5655c0 ]
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/bus.c | 4 +--
drivers/acpi/x86/utils.c | 64 +++++++++++++++++++++++-----------------
include/acpi/acpi_bus.h | 5 ++--
3 files changed, 42 insertions(+), 31 deletions(-)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index fa923a9292244..dd535b4b9a160 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -98,8 +98,8 @@ int acpi_bus_get_status(struct acpi_device *device)
acpi_status status;
unsigned long long sta;
- if (acpi_device_always_present(device)) {
- acpi_set_device_status(device, ACPI_STA_DEFAULT);
+ if (acpi_device_override_status(device, &sta)) {
+ acpi_set_device_status(device, sta);
return 0;
}
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index 3bcac98f6eca6..edb4f3fd93dc3 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -22,54 +22,63 @@
* Some BIOS-es (temporarily) hide specific APCI devices to work around Windows
* driver bugs. We use DMI matching to match known cases of this.
*
- * We work around this by always reporting ACPI_STA_DEFAULT for these
- * devices. Note this MUST only be done for devices where this is safe.
+ * Likewise sometimes some not-actually present devices are sometimes
+ * reported as present, which may cause issues.
*
- * This forcing of devices to be present is limited to specific CPU (SoC)
- * models both to avoid potentially causing trouble on other models and
- * because some HIDs are re-used on different SoCs for completely
- * different devices.
+ * We work around this by using the below quirk list to override the status
+ * reported by the _STA method with a fixed value (ACPI_STA_DEFAULT or 0).
+ * Note this MUST only be done for devices where this is safe.
+ *
+ * This status overriding is limited to specific CPU (SoC) models both to
+ * avoid potentially causing trouble on other models and because some HIDs
+ * are re-used on different SoCs for completely different devices.
*/
-struct always_present_id {
+struct override_status_id {
struct acpi_device_id hid[2];
struct x86_cpu_id cpu_ids[2];
struct dmi_system_id dmi_ids[2]; /* Optional */
const char *uid;
+ unsigned long long status;
};
-#define X86_MATCH(model) X86_MATCH_INTEL_FAM6_MODEL(model, NULL)
-
-#define ENTRY(hid, uid, cpu_models, dmi...) { \
+#define ENTRY(status, hid, uid, cpu_model, dmi...) { \
{ { hid, }, {} }, \
- { cpu_models, {} }, \
+ { X86_MATCH_INTEL_FAM6_MODEL(cpu_model, NULL), {} }, \
{ { .matches = dmi }, {} }, \
uid, \
+ status, \
}
-static const struct always_present_id always_present_ids[] = {
+#define PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
+ ENTRY(ACPI_STA_DEFAULT, hid, uid, cpu_model, dmi)
+
+#define NOT_PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
+ ENTRY(0, hid, uid, cpu_model, dmi)
+
+static const struct override_status_id override_status_ids[] = {
/*
* Bay / Cherry Trail PWM directly poked by GPU driver in win10,
* but Linux uses a separate PWM driver, harmless if not used.
*/
- ENTRY("80860F09", "1", X86_MATCH(ATOM_SILVERMONT), {}),
- ENTRY("80862288", "1", X86_MATCH(ATOM_AIRMONT), {}),
+ PRESENT_ENTRY_HID("80860F09", "1", ATOM_SILVERMONT, {}),
+ PRESENT_ENTRY_HID("80862288", "1", ATOM_AIRMONT, {}),
/*
* The INT0002 device is necessary to clear wakeup interrupt sources
* on Cherry Trail devices, without it we get nobody cared IRQ msgs.
*/
- ENTRY("INT0002", "1", X86_MATCH(ATOM_AIRMONT), {}),
+ PRESENT_ENTRY_HID("INT0002", "1", ATOM_AIRMONT, {}),
/*
* On the Dell Venue 11 Pro 7130 and 7139, the DSDT hides
* the touchscreen ACPI device until a certain time
* after _SB.PCI0.GFX0.LCD.LCD1._ON gets called has passed
* *and* _STA has been called at least 3 times since.
*/
- ENTRY("SYNA7500", "1", X86_MATCH(HASWELL_L), {
+ PRESENT_ENTRY_HID("SYNA7500", "1", HASWELL_L, {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"),
}),
- ENTRY("SYNA7500", "1", X86_MATCH(HASWELL_L), {
+ PRESENT_ENTRY_HID("SYNA7500", "1", HASWELL_L, {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7139"),
}),
@@ -85,19 +94,19 @@ static const struct always_present_id always_present_ids[] = {
* was copy-pasted from the GPD win, so it has a disabled KIOX000A
* node which we should not enable, thus we also check the BIOS date.
*/
- ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+ PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
DMI_MATCH(DMI_BIOS_DATE, "02/21/2017")
}),
- ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+ PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
DMI_MATCH(DMI_BIOS_DATE, "03/20/2017")
}),
- ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+ PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
@@ -105,26 +114,27 @@ static const struct always_present_id always_present_ids[] = {
}),
};
-bool acpi_device_always_present(struct acpi_device *adev)
+bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status)
{
bool ret = false;
unsigned int i;
- for (i = 0; i < ARRAY_SIZE(always_present_ids); i++) {
- if (acpi_match_device_ids(adev, always_present_ids[i].hid))
+ for (i = 0; i < ARRAY_SIZE(override_status_ids); i++) {
+ if (acpi_match_device_ids(adev, override_status_ids[i].hid))
continue;
if (!adev->pnp.unique_id ||
- strcmp(adev->pnp.unique_id, always_present_ids[i].uid))
+ strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
continue;
- if (!x86_match_cpu(always_present_ids[i].cpu_ids))
+ if (!x86_match_cpu(override_status_ids[i].cpu_ids))
continue;
- if (always_present_ids[i].dmi_ids[0].matches[0].slot &&
- !dmi_check_system(always_present_ids[i].dmi_ids))
+ if (override_status_ids[i].dmi_ids[0].matches[0].slot &&
+ !dmi_check_system(override_status_ids[i].dmi_ids))
continue;
+ *status = override_status_ids[i].status;
ret = true;
break;
}
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 13d93371790ec..e9c7d7b270e73 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -613,9 +613,10 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
#ifdef CONFIG_X86
-bool acpi_device_always_present(struct acpi_device *adev);
+bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status);
#else
-static inline bool acpi_device_always_present(struct acpi_device *adev)
+static inline bool acpi_device_override_status(struct acpi_device *adev,
+ unsigned long long *status)
{
return false;
}
--
2.34.1
From: Tetsuo Handa <[email protected]>
[ Upstream commit e338924bd05d6e71574bc13e310c89e10e49a8a5 ]
ioctl(fd, LOOP_CTL_ADD, 1048576) causes
sysfs: cannot create duplicate filename '/dev/block/7:0'
message because such request is treated as if ioctl(fd, LOOP_CTL_ADD, 0)
due to MINORMASK == 1048575. Verify that all minor numbers for that device
fit in the minor range.
Reported-by: wangyangbo <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/genhd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/block/genhd.c b/block/genhd.c
index 22f899615801c..de789d1a1e3d2 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -420,6 +420,8 @@ int device_add_disk(struct device *parent, struct gendisk *disk,
DISK_MAX_PARTS);
disk->minors = DISK_MAX_PARTS;
}
+ if (disk->first_minor + disk->minors > MINORMASK + 1)
+ return -EINVAL;
} else {
if (WARN_ON(disk->minors))
return -EINVAL;
--
2.34.1
From: James Hilliard <[email protected]>
[ Upstream commit c8ed7d2f614cd8b315981d116c7a2fb01829500d ]
Some uvc devices appear to require the maximum allowed USB timeout
for GET_CUR/SET_CUR requests.
So lets just bump the UVC control timeout to 5 seconds which is the
same as the usb ctrl get/set defaults:
USB_CTRL_GET_TIMEOUT 5000
USB_CTRL_SET_TIMEOUT 5000
It fixes the following runtime warnings:
Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1).
Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2).
Signed-off-by: James Hilliard <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvcvideo.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index cce5e38133cd3..c3ea6a53869f5 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -189,7 +189,7 @@
/* Maximum status buffer size in bytes of interrupt URB. */
#define UVC_MAX_STATUS_SIZE 16
-#define UVC_CTRL_CONTROL_TIMEOUT 500
+#define UVC_CTRL_CONTROL_TIMEOUT 5000
#define UVC_CTRL_STREAMING_TIMEOUT 5000
/* Maximum allowed number of control mappings per device */
--
2.34.1
From: Lucas Stach <[email protected]>
[ Upstream commit cdd156955f946beaa5f3a00d8ccf90e5a197becc ]
Some GPU heavy test programs manage to trigger the hangcheck quite often.
If there are no other GPU users in the system and the test program
exhibits a very regular structure in the commandstreams that are being
submitted, we can end up with two distinct submits managing to trigger
the hangcheck with the FE in a very similar address range. This leads
the hangcheck to believe that the GPU is stuck, while in reality the GPU
is already busy working on a different job. To avoid those spurious
GPU resets, also remember and consider the last completed fence seqno
in the hang check.
Reported-by: Joerg Albert <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Christian Gmeiner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 1 +
drivers/gpu/drm/etnaviv/etnaviv_sched.c | 4 +++-
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
index 1c75c8ed5bcea..85eddd492774d 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
@@ -130,6 +130,7 @@ struct etnaviv_gpu {
/* hang detection */
u32 hangcheck_dma_addr;
+ u32 hangcheck_fence;
void __iomem *mmio;
int irq;
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_sched.c b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
index feb6da1b6cebc..bbf391f48f949 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
@@ -107,8 +107,10 @@ static enum drm_gpu_sched_stat etnaviv_sched_timedout_job(struct drm_sched_job
*/
dma_addr = gpu_read(gpu, VIVS_FE_DMA_ADDRESS);
change = dma_addr - gpu->hangcheck_dma_addr;
- if (change < 0 || change > 16) {
+ if (gpu->completed_fence != gpu->hangcheck_fence ||
+ change < 0 || change > 16) {
gpu->hangcheck_dma_addr = dma_addr;
+ gpu->hangcheck_fence = gpu->completed_fence;
goto out_no_timeout;
}
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 87d6576ddf8ac25f36597bc93ca17f6628289c16 ]
The name of the package with ctexhook.sty is different on
Debian/Ubuntu.
Reported-by: Akira Yokosawa <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Tested-by: Akira Yokosawa <[email protected]>
Link: https://lore.kernel.org/r/63882425609a2820fac78f5e94620abeb7ed5f6f.1641429634.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/sphinx-pre-install | 3 +++
1 file changed, 3 insertions(+)
diff --git a/scripts/sphinx-pre-install b/scripts/sphinx-pre-install
index 288e86a9d1e58..61a79ce705ccf 100755
--- a/scripts/sphinx-pre-install
+++ b/scripts/sphinx-pre-install
@@ -369,6 +369,9 @@ sub give_debian_hints()
);
if ($pdf) {
+ check_missing_file(["/usr/share/texlive/texmf-dist/tex/latex/ctex/ctexhook.sty"],
+ "texlive-lang-chinese", 2);
+
check_missing_file(["/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf"],
"fonts-dejavu", 2);
--
2.34.1
From: Andrew Lunn <[email protected]>
[ Upstream commit 222a011efc839ca1f51bf89fe7a2b3705fa55ccd ]
When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.
This change allows traceroute to function in the presence of Segment
Routing.
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/seg6.h | 19 +++++++++++++++++++
net/ipv6/udp.c | 3 ++-
2 files changed, 21 insertions(+), 1 deletion(-)
--- a/include/net/seg6.h
+++ b/include/net/seg6.h
@@ -65,4 +65,23 @@ extern int seg6_do_srh_encap(struct sk_b
extern int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh);
extern int seg6_lookup_nexthop(struct sk_buff *skb, struct in6_addr *nhaddr,
u32 tbl_id);
+
+/* If the packet which invoked an ICMP error contains an SRH return
+ * the true destination address from within the SRH, otherwise use the
+ * destination address in the IP header.
+ */
+static inline const struct in6_addr *seg6_get_daddr(struct sk_buff *skb,
+ struct inet6_skb_parm *opt)
+{
+ struct ipv6_sr_hdr *srh;
+
+ if (opt->flags & IP6SKB_SEG6) {
+ srh = (struct ipv6_sr_hdr *)(skb->data + opt->srhoff);
+ return &srh->segments[0];
+ }
+
+ return NULL;
+}
+
+
#endif
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -40,6 +40,7 @@
#include <net/transp_v6.h>
#include <net/ip6_route.h>
#include <net/raw.h>
+#include <net/seg6.h>
#include <net/tcp_states.h>
#include <net/ip6_checksum.h>
#include <net/ip6_tunnel.h>
@@ -561,7 +562,7 @@ int __udp6_lib_err(struct sk_buff *skb,
struct ipv6_pinfo *np;
const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data;
const struct in6_addr *saddr = &hdr->saddr;
- const struct in6_addr *daddr = &hdr->daddr;
+ const struct in6_addr *daddr = seg6_get_daddr(skb, opt) ? : &hdr->daddr;
struct udphdr *uh = (struct udphdr *)(skb->data+offset);
bool tunnel = false;
struct sock *sk;
From: Hari Bathini <[email protected]>
[ Upstream commit 219572d2fc4135b5ce65c735d881787d48b10e71 ]
Kdump can be triggered after panic_notifers since commit f06e5153f4ae2
("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump
after panic_notifers") introduced crash_kexec_post_notifiers option.
But using this option would mean smp_send_stop(), that marks all other
CPUs as offline, gets called before kdump is triggered. As a result,
kdump routines fail to save other CPUs' registers. To fix this, kdump
friendly crash_smp_send_stop() function was introduced with kernel
commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path"). Override this kdump friendly weak
function to handle crash_kexec_post_notifiers option appropriately
on powerpc.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Hari Bathini <[email protected]>
[Fixed signature of crash_stop_this_cpu() - reported by [email protected]]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/smp.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index c7ef0739c8640..d03823aa7e4de 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -620,6 +620,36 @@ void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
}
#endif
+#ifdef CONFIG_NMI_IPI
+static void crash_stop_this_cpu(struct pt_regs *regs)
+#else
+static void crash_stop_this_cpu(void *dummy)
+#endif
+{
+ /*
+ * Just busy wait here and avoid marking CPU as offline to ensure
+ * register data is captured appropriately.
+ */
+ while (1)
+ cpu_relax();
+}
+
+void crash_smp_send_stop(void)
+{
+ static bool stopped = false;
+
+ if (stopped)
+ return;
+
+ stopped = true;
+
+#ifdef CONFIG_NMI_IPI
+ smp_send_nmi_ipi(NMI_IPI_ALL_OTHERS, crash_stop_this_cpu, 1000000);
+#else
+ smp_call_function(crash_stop_this_cpu, NULL, 0);
+#endif /* CONFIG_NMI_IPI */
+}
+
#ifdef CONFIG_NMI_IPI
static void nmi_stop_this_cpu(struct pt_regs *regs)
{
--
2.34.1
From: Josef Bacik <[email protected]>
[ Upstream commit fcba0120edf88328524a4878d1d6f4ad39f2ec81 ]
We search for an extent entry with .offset = -1, which shouldn't be a
thing, but corruption happens. Add an ASSERT() for the developers,
return -EUCLEAN for mortals.
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/backref.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index f735b8798ba12..6b4b0f105a572 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1214,7 +1214,12 @@ again:
ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
if (ret < 0)
goto out;
- BUG_ON(ret == 0);
+ if (ret == 0) {
+ /* This shouldn't happen, indicates a bug or fs corruption. */
+ ASSERT(ret != 0);
+ ret = -EUCLEAN;
+ goto out;
+ }
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
if (trans && likely(trans->type != __TRANS_DUMMY) &&
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ]
ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e
If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class,
acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to
obtain return_desc which may require additional resolution with
the help of acpi_ex_read_data_from_field (). If the latter fails,
the reference counter of the original return_desc is decremented
which is incorrect, because acpi_ns_get_attached_object () does not
increment the reference counter of the object returned by it.
This issue may lead to premature deletion of the attached object
while it is still attached and a use-after-free and crash in the
host OS. For example, this may happen when on evaluation of ref_of()
a local region field where there is no registered handler for the
given Operation Region.
Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away
after a acpi_ex_read_data_from_field () failure.
Link: https://github.com/acpica/acpica/commit/d984f120
Link: https://github.com/acpica/acpica/pull/685
Reported-by: Lenny Szubowicz <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/exoparg1.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index b639e930d6429..44b7c350ed5ca 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -1007,7 +1007,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
(walk_state, return_desc,
&temp_desc);
if (ACPI_FAILURE(status)) {
- goto cleanup;
+ return_ACPI_STATUS
+ (status);
}
return_desc = temp_desc;
--
2.34.1
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 3f92a5be6084b77f764a8bbb881ac0d12cb9e863 ]
Fix 'dtbs_check' in serdes_ln_ctrl (mux@4080) node by changing the node
name to mux-controller@4080.
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Reviewed-by: Aswath Govindraju <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 08c8d1b47dcd9..e85c89eebfa31 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -42,7 +42,7 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x00100000 0x1c000>;
- serdes_ln_ctrl: mux@4080 {
+ serdes_ln_ctrl: mux-controller@4080 {
compatible = "mmio-mux";
reg = <0x00004080 0x50>;
#mux-control-cells = <1>;
--
2.34.1
From: Antony Antony <[email protected]>
[ Upstream commit 4e484b3e969b52effd95c17f7a86f39208b2ccf4 ]
Kernel generates mapping change message, XFRM_MSG_MAPPING,
when a source port chage is detected on a input state with UDP
encapsulation set. Kernel generates a message for each IPsec packet
with new source port. For a high speed flow per packet mapping change
message can be excessive, and can overload the user space listener.
Introduce rate limiting for XFRM_MSG_MAPPING message to the user space.
The rate limiting is configurable via netlink, when adding a new SA or
updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds.
v1->v2 change:
update xfrm_sa_len()
v2->v3 changes:
use u32 insted unsigned long to reduce size of struct xfrm_state
fix xfrm_ompat size Reported-by: kernel test robot <[email protected]>
accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present
Co-developed-by: Thomas Egerer <[email protected]>
Signed-off-by: Thomas Egerer <[email protected]>
Signed-off-by: Antony Antony <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/xfrm.h | 5 +++++
include/uapi/linux/xfrm.h | 1 +
net/xfrm/xfrm_compat.c | 6 ++++--
net/xfrm/xfrm_state.c | 23 ++++++++++++++++++++++-
net/xfrm/xfrm_user.c | 18 +++++++++++++++++-
5 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 2308210793a01..2589e4c0501bd 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -200,6 +200,11 @@ struct xfrm_state {
struct xfrm_algo_aead *aead;
const char *geniv;
+ /* mapping change rate limiting */
+ __be16 new_mapping_sport;
+ u32 new_mapping; /* seconds */
+ u32 mapping_maxage; /* seconds for input SA */
+
/* Data for encapsulator */
struct xfrm_encap_tmpl *encap;
struct sock __rcu *encap_sk;
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
index eda0426ec4c2b..4e29d78518902 100644
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -313,6 +313,7 @@ enum xfrm_attr_type_t {
XFRMA_SET_MARK, /* __u32 */
XFRMA_SET_MARK_MASK, /* __u32 */
XFRMA_IF_ID, /* __u32 */
+ XFRMA_MTIMER_THRESH, /* __u32 in seconds for input SA */
__XFRMA_MAX
#define XFRMA_OUTPUT_MARK XFRMA_SET_MARK /* Compatibility */
diff --git a/net/xfrm/xfrm_compat.c b/net/xfrm/xfrm_compat.c
index 2bf2693901631..a0f62fa02e06e 100644
--- a/net/xfrm/xfrm_compat.c
+++ b/net/xfrm/xfrm_compat.c
@@ -127,6 +127,7 @@ static const struct nla_policy compat_policy[XFRMA_MAX+1] = {
[XFRMA_SET_MARK] = { .type = NLA_U32 },
[XFRMA_SET_MARK_MASK] = { .type = NLA_U32 },
[XFRMA_IF_ID] = { .type = NLA_U32 },
+ [XFRMA_MTIMER_THRESH] = { .type = NLA_U32 },
};
static struct nlmsghdr *xfrm_nlmsg_put_compat(struct sk_buff *skb,
@@ -274,9 +275,10 @@ static int xfrm_xlate64_attr(struct sk_buff *dst, const struct nlattr *src)
case XFRMA_SET_MARK:
case XFRMA_SET_MARK_MASK:
case XFRMA_IF_ID:
+ case XFRMA_MTIMER_THRESH:
return xfrm_nla_cpy(dst, src, nla_len(src));
default:
- BUILD_BUG_ON(XFRMA_MAX != XFRMA_IF_ID);
+ BUILD_BUG_ON(XFRMA_MAX != XFRMA_MTIMER_THRESH);
pr_warn_once("unsupported nla_type %d\n", src->nla_type);
return -EOPNOTSUPP;
}
@@ -431,7 +433,7 @@ static int xfrm_xlate32_attr(void *dst, const struct nlattr *nla,
int err;
if (type > XFRMA_MAX) {
- BUILD_BUG_ON(XFRMA_MAX != XFRMA_IF_ID);
+ BUILD_BUG_ON(XFRMA_MAX != XFRMA_MTIMER_THRESH);
NL_SET_ERR_MSG(extack, "Bad attribute");
return -EOPNOTSUPP;
}
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index a2f4001221d16..78d51399a0f4b 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1593,6 +1593,9 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig,
x->km.seq = orig->km.seq;
x->replay = orig->replay;
x->preplay = orig->preplay;
+ x->mapping_maxage = orig->mapping_maxage;
+ x->new_mapping = 0;
+ x->new_mapping_sport = 0;
return x;
@@ -2242,7 +2245,7 @@ int km_query(struct xfrm_state *x, struct xfrm_tmpl *t, struct xfrm_policy *pol)
}
EXPORT_SYMBOL(km_query);
-int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
+static int __km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
{
int err = -EINVAL;
struct xfrm_mgr *km;
@@ -2257,6 +2260,24 @@ int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
rcu_read_unlock();
return err;
}
+
+int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
+{
+ int ret = 0;
+
+ if (x->mapping_maxage) {
+ if ((jiffies / HZ - x->new_mapping) > x->mapping_maxage ||
+ x->new_mapping_sport != sport) {
+ x->new_mapping_sport = sport;
+ x->new_mapping = jiffies / HZ;
+ ret = __km_new_mapping(x, ipaddr, sport);
+ }
+ } else {
+ ret = __km_new_mapping(x, ipaddr, sport);
+ }
+
+ return ret;
+}
EXPORT_SYMBOL(km_new_mapping);
void km_policy_expired(struct xfrm_policy *pol, int dir, int hard, u32 portid)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 5ad7530f65457..b10f88822c0df 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -282,6 +282,10 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
err = 0;
+ if (attrs[XFRMA_MTIMER_THRESH])
+ if (!attrs[XFRMA_ENCAP])
+ err = -EINVAL;
+
out:
return err;
}
@@ -521,6 +525,7 @@ static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs,
struct nlattr *lt = attrs[XFRMA_LTIME_VAL];
struct nlattr *et = attrs[XFRMA_ETIMER_THRESH];
struct nlattr *rt = attrs[XFRMA_REPLAY_THRESH];
+ struct nlattr *mt = attrs[XFRMA_MTIMER_THRESH];
if (re) {
struct xfrm_replay_state_esn *replay_esn;
@@ -552,6 +557,9 @@ static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs,
if (rt)
x->replay_maxdiff = nla_get_u32(rt);
+
+ if (mt)
+ x->mapping_maxage = nla_get_u32(mt);
}
static void xfrm_smark_init(struct nlattr **attrs, struct xfrm_mark *m)
@@ -1029,8 +1037,13 @@ static int copy_to_user_state_extra(struct xfrm_state *x,
if (ret)
goto out;
}
- if (x->security)
+ if (x->security) {
ret = copy_sec_ctx(x->security, skb);
+ if (ret)
+ goto out;
+ }
+ if (x->mapping_maxage)
+ ret = nla_put_u32(skb, XFRMA_MTIMER_THRESH, x->mapping_maxage);
out:
return ret;
}
@@ -3084,6 +3097,9 @@ static inline unsigned int xfrm_sa_len(struct xfrm_state *x)
/* Must count x->lastused as it may become non-zero behind our back. */
l += nla_total_size_64bit(sizeof(u64));
+ if (x->mapping_maxage)
+ l += nla_total_size(sizeof(x->mapping_maxage));
+
return l;
}
--
2.34.1
From: Ilan Peer <[email protected]>
[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ]
The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.
Fix the Rx processing to remove the extra bytes on non monitor
cases.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index c12f303cf652c..efccdd3f33773 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -121,12 +121,39 @@ static int iwl_mvm_create_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
struct iwl_rx_mpdu_desc *desc = (void *)pkt->data;
unsigned int headlen, fraglen, pad_len = 0;
unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control);
+ u8 mic_crc_len = u8_get_bits(desc->mac_flags1,
+ IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK) << 1;
if (desc->mac_flags2 & IWL_RX_MPDU_MFLG2_PAD) {
len -= 2;
pad_len = 2;
}
+ /*
+ * For non monitor interface strip the bytes the RADA might not have
+ * removed. As monitor interface cannot exist with other interfaces
+ * this removal is safe.
+ */
+ if (mic_crc_len && !ieee80211_hw_check(mvm->hw, RX_INCLUDES_FCS)) {
+ u32 pkt_flags = le32_to_cpu(pkt->len_n_flags);
+
+ /*
+ * If RADA was not enabled then decryption was not performed so
+ * the MIC cannot be removed.
+ */
+ if (!(pkt_flags & FH_RSCSR_RADA_EN)) {
+ if (WARN_ON(crypt_len > mic_crc_len))
+ return -EINVAL;
+
+ mic_crc_len -= crypt_len;
+ }
+
+ if (WARN_ON(mic_crc_len > len))
+ return -EINVAL;
+
+ len -= mic_crc_len;
+ }
+
/* If frame is small enough to fit in skb->head, pull it completely.
* If not, only pull ieee80211_hdr (including crypto if present, and
* an additional 8 bytes for SNAP/ethertype, see below) so that
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 6fadb494a638d8b8a55864ecc6ac58194f03f327 ]
Currently ALSA sequencer core tries to process the queued events as
much as possible when they become dispatchable. If applications try
to queue too massive events to be processed at the very same timing,
the sequencer core would still try to process such all events, either
in the interrupt context or via some notifier; in either away, it
might be a cause of RCU stall or such problems.
As a potential workaround for those problems, this patch adds the
upper limit of the amount of events to be processed. The remaining
events are processed in the next batch, so they won't be lost.
For the time being, it's limited up to 1000 events per queue, which
should be high enough for any normal usages.
Reported-by: Zqiang <[email protected]>
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/seq/seq_queue.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/sound/core/seq/seq_queue.c b/sound/core/seq/seq_queue.c
index d6c02dea976c8..bc933104c3eea 100644
--- a/sound/core/seq/seq_queue.c
+++ b/sound/core/seq/seq_queue.c
@@ -235,12 +235,15 @@ struct snd_seq_queue *snd_seq_queue_find_name(char *name)
/* -------------------------------------------------------- */
+#define MAX_CELL_PROCESSES_IN_QUEUE 1000
+
void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
{
unsigned long flags;
struct snd_seq_event_cell *cell;
snd_seq_tick_time_t cur_tick;
snd_seq_real_time_t cur_time;
+ int processed = 0;
if (q == NULL)
return;
@@ -263,6 +266,8 @@ void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
if (!cell)
break;
snd_seq_dispatch_event(cell, atomic, hop);
+ if (++processed >= MAX_CELL_PROCESSES_IN_QUEUE)
+ goto out; /* the rest processed at the next batch */
}
/* Process time queue... */
@@ -272,14 +277,19 @@ void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
if (!cell)
break;
snd_seq_dispatch_event(cell, atomic, hop);
+ if (++processed >= MAX_CELL_PROCESSES_IN_QUEUE)
+ goto out; /* the rest processed at the next batch */
}
+ out:
/* free lock */
spin_lock_irqsave(&q->check_lock, flags);
if (q->check_again) {
q->check_again = 0;
- spin_unlock_irqrestore(&q->check_lock, flags);
- goto __again;
+ if (processed < MAX_CELL_PROCESSES_IN_QUEUE) {
+ spin_unlock_irqrestore(&q->check_lock, flags);
+ goto __again;
+ }
}
q->check_blocked = 0;
spin_unlock_irqrestore(&q->check_lock, flags);
--
2.34.1
From: Felix Fietkau <[email protected]>
[ Upstream commit 70fb028707c8871ef9e56b3ffa3d895e14956cc4 ]
Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.
This also fixes running multiple AP interfaces on MT7613, which only has 3
WMM slots.
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 51260a669d166..fc266da54fe7b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -211,11 +211,9 @@ static int mt7615_add_interface(struct ieee80211_hw *hw,
mvif->mt76.omac_idx = idx;
mvif->mt76.band_idx = ext_phy;
- if (mt7615_ext_phy(dev))
- mvif->mt76.wmm_idx = ext_phy * (MT7615_MAX_WMM_SETS / 2) +
- mvif->mt76.idx % (MT7615_MAX_WMM_SETS / 2);
- else
- mvif->mt76.wmm_idx = mvif->mt76.idx % MT7615_MAX_WMM_SETS;
+ mvif->mt76.wmm_idx = vif->type != NL80211_IFTYPE_AP;
+ if (ext_phy)
+ mvif->mt76.wmm_idx += 2;
dev->mt76.vif_mask |= BIT(mvif->mt76.idx);
dev->omac_mask |= BIT_ULL(mvif->mt76.omac_idx);
--
2.34.1
From: Alistair Francis <[email protected]>
[ Upstream commit b60d3c803d7603432a08aeaf988aff53b3a5ec64 ]
Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.
Signed-off-by: Alistair Francis <[email protected]>
Acked-by: Rob Herring <[email protected]>
[bentiss: silence checkpatch warnings]
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../devicetree/bindings/input/hid-over-i2c.txt | 2 ++
drivers/hid/i2c-hid/i2c-hid-acpi.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-core.c | 4 +++-
drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-of.c | 10 +++++++++-
drivers/hid/i2c-hid/i2c-hid.h | 2 +-
6 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2f..34c43d3bddfd1 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
- vdd-supply: phandle of the regulator that provides the supply voltage.
- post-power-on-delay-ms: time required by the device after enabling its regulators
or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
Example:
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index a6f0257a26de3..b96ae15e0ad91 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -111,7 +111,7 @@ static int i2c_hid_acpi_probe(struct i2c_client *client)
}
return i2c_hid_core_probe(client, &ihid_acpi->ops,
- hid_descriptor_address);
+ hid_descriptor_address, 0);
}
static const struct acpi_device_id i2c_hid_acpi_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 517141138b007..4804d71e5293a 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -912,7 +912,7 @@ static void i2c_hid_core_shutdown_tail(struct i2c_hid *ihid)
}
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
- u16 hid_descriptor_address)
+ u16 hid_descriptor_address, u32 quirks)
{
int ret;
struct i2c_hid *ihid;
@@ -1009,6 +1009,8 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
goto err_mem_free;
}
+ hid->quirks |= quirks;
+
return 0;
err_mem_free:
diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
index 52674149a2750..b4dad66fa954d 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -150,7 +150,7 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client,
goodix_i2c_hid_deassert_reset(ihid_goodix, true);
mutex_unlock(&ihid_goodix->regulator_mutex);
- return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001);
+ return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
}
static const struct goodix_i2c_hid_timing_data goodix_gt7375p_timing_data = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
index 4bf7cea926379..97a27a803f58d 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/hid.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -71,6 +72,7 @@ static int i2c_hid_of_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct i2c_hid_of *ihid_of;
u16 hid_descriptor_address;
+ u32 quirks = 0;
int ret;
u32 val;
@@ -105,8 +107,14 @@ static int i2c_hid_of_probe(struct i2c_client *client,
if (ret)
return ret;
+ if (device_property_read_bool(dev, "touchscreen-inverted-x"))
+ quirks |= HID_QUIRK_X_INVERT;
+
+ if (device_property_read_bool(dev, "touchscreen-inverted-y"))
+ quirks |= HID_QUIRK_Y_INVERT;
+
return i2c_hid_core_probe(client, &ihid_of->ops,
- hid_descriptor_address);
+ hid_descriptor_address, quirks);
}
static const struct of_device_id i2c_hid_of_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index 05a7827d211af..236cc062d5ef8 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -32,7 +32,7 @@ struct i2chid_ops {
};
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
- u16 hid_descriptor_address);
+ u16 hid_descriptor_address, u32 quirks);
int i2c_hid_core_remove(struct i2c_client *client);
void i2c_hid_core_shutdown(struct i2c_client *client);
--
2.34.1
From: Andrew Lunn <[email protected]>
[ Upstream commit fa55a7d745de2d10489295b0674a403e2a5d490d ]
An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.
Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/seg6.h | 1 +
net/ipv6/seg6.c | 29 +++++++++++++++++++++++++++++
net/ipv6/seg6_local.c | 33 ++-------------------------------
3 files changed, 32 insertions(+), 31 deletions(-)
diff --git a/include/net/seg6.h b/include/net/seg6.h
index 9d19c15e8545c..a6f25983670aa 100644
--- a/include/net/seg6.h
+++ b/include/net/seg6.h
@@ -58,6 +58,7 @@ extern int seg6_local_init(void);
extern void seg6_local_exit(void);
extern bool seg6_validate_srh(struct ipv6_sr_hdr *srh, int len, bool reduced);
+extern struct ipv6_sr_hdr *seg6_get_srh(struct sk_buff *skb, int flags);
extern int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh,
int proto);
extern int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh);
diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c
index e412817fba2f3..0718529088930 100644
--- a/net/ipv6/seg6.c
+++ b/net/ipv6/seg6.c
@@ -75,6 +75,35 @@ bool seg6_validate_srh(struct ipv6_sr_hdr *srh, int len, bool reduced)
return true;
}
+struct ipv6_sr_hdr *seg6_get_srh(struct sk_buff *skb, int flags)
+{
+ struct ipv6_sr_hdr *srh;
+ int len, srhoff = 0;
+
+ if (ipv6_find_hdr(skb, &srhoff, IPPROTO_ROUTING, NULL, &flags) < 0)
+ return NULL;
+
+ if (!pskb_may_pull(skb, srhoff + sizeof(*srh)))
+ return NULL;
+
+ srh = (struct ipv6_sr_hdr *)(skb->data + srhoff);
+
+ len = (srh->hdrlen + 1) << 3;
+
+ if (!pskb_may_pull(skb, srhoff + len))
+ return NULL;
+
+ /* note that pskb_may_pull may change pointers in header;
+ * for this reason it is necessary to reload them when needed.
+ */
+ srh = (struct ipv6_sr_hdr *)(skb->data + srhoff);
+
+ if (!seg6_validate_srh(srh, len, true))
+ return NULL;
+
+ return srh;
+}
+
static struct genl_family seg6_genl_family;
static const struct nla_policy seg6_genl_policy[SEG6_ATTR_MAX + 1] = {
diff --git a/net/ipv6/seg6_local.c b/net/ipv6/seg6_local.c
index 2dc40b3f373ef..ef88489c71f52 100644
--- a/net/ipv6/seg6_local.c
+++ b/net/ipv6/seg6_local.c
@@ -150,40 +150,11 @@ static struct seg6_local_lwt *seg6_local_lwtunnel(struct lwtunnel_state *lwt)
return (struct seg6_local_lwt *)lwt->data;
}
-static struct ipv6_sr_hdr *get_srh(struct sk_buff *skb, int flags)
-{
- struct ipv6_sr_hdr *srh;
- int len, srhoff = 0;
-
- if (ipv6_find_hdr(skb, &srhoff, IPPROTO_ROUTING, NULL, &flags) < 0)
- return NULL;
-
- if (!pskb_may_pull(skb, srhoff + sizeof(*srh)))
- return NULL;
-
- srh = (struct ipv6_sr_hdr *)(skb->data + srhoff);
-
- len = (srh->hdrlen + 1) << 3;
-
- if (!pskb_may_pull(skb, srhoff + len))
- return NULL;
-
- /* note that pskb_may_pull may change pointers in header;
- * for this reason it is necessary to reload them when needed.
- */
- srh = (struct ipv6_sr_hdr *)(skb->data + srhoff);
-
- if (!seg6_validate_srh(srh, len, true))
- return NULL;
-
- return srh;
-}
-
static struct ipv6_sr_hdr *get_and_validate_srh(struct sk_buff *skb)
{
struct ipv6_sr_hdr *srh;
- srh = get_srh(skb, IP6_FH_F_SKIP_RH);
+ srh = seg6_get_srh(skb, IP6_FH_F_SKIP_RH);
if (!srh)
return NULL;
@@ -200,7 +171,7 @@ static bool decap_and_validate(struct sk_buff *skb, int proto)
struct ipv6_sr_hdr *srh;
unsigned int off = 0;
- srh = get_srh(skb, 0);
+ srh = seg6_get_srh(skb, 0);
if (srh && srh->segments_left > 0)
return false;
--
2.34.1
From: Baochen Qiang <[email protected]>
[ Upstream commit 767c94caf0efad136157110787fe221b74cb5c8a ]
With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:
[ 166.059415] ============================================
[ 166.059416] WARNING: possible recursive locking detected
[ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O
[ 166.059420] --------------------------------------------
[ 166.059421] kworker/0:2/116 is trying to acquire lock:
[ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059440]
but task is already holding lock:
[ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059491]
other info that might help us debug this:
[ 166.059492] Possible unsafe locking scenario:
[ 166.059493] CPU0
[ 166.059494] ----
[ 166.059495] lock(&srng->lock);
[ 166.059498] lock(&srng->lock);
[ 166.059500]
*** DEADLOCK ***
[ 166.059501] May be due to missing lock nesting notation
[ 166.059502] 3 locks held by kworker/0:2/116:
[ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059532]
stack backtrace:
[ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10
[ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[ 166.059539] Workqueue: events free_obj_work
[ 166.059543] Call Trace:
[ 166.059545] <IRQ>
[ 166.059547] dump_stack_lvl+0x56/0x7b
[ 166.059552] __lock_acquire+0xb9a/0x1a50
[ 166.059556] lock_acquire+0x1e2/0x330
[ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059571] _raw_spin_lock_bh+0x33/0x70
[ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k]
[ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k]
[ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k]
[ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci]
[ 166.059659] __napi_poll+0x28/0x230
[ 166.059664] net_rx_action+0x285/0x310
[ 166.059668] __do_softirq+0xe6/0x4d2
[ 166.059672] irq_exit_rcu+0xd2/0xf0
[ 166.059675] common_interrupt+0xa5/0xc0
[ 166.059678] </IRQ>
[ 166.059679] <TASK>
[ 166.059680] asm_common_interrupt+0x1e/0x40
[ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70
[ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a
[ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206
[ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006
[ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001
[ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001
[ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840
[ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001
[ 166.059704] free_debug_processing+0x257/0x3d0
[ 166.059708] ? free_obj_work+0x1f5/0x250
[ 166.059712] __slab_free+0x374/0x5a0
[ 166.059718] ? kmem_cache_free+0x2e1/0x370
[ 166.059721] ? free_obj_work+0x1f5/0x250
[ 166.059724] kmem_cache_free+0x2e1/0x370
[ 166.059727] free_obj_work+0x1f5/0x250
[ 166.059731] process_one_work+0x28b/0x660
[ 166.059735] ? process_one_work+0x660/0x660
[ 166.059738] worker_thread+0x37/0x390
[ 166.059741] ? process_one_work+0x660/0x660
[ 166.059743] kthread+0x176/0x1a0
[ 166.059746] ? set_kthread_struct+0x40/0x40
[ 166.059749] ret_from_fork+0x22/0x30
[ 166.059754] </TASK>
Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.
On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.
Fix it by assigning separate lock class key for each srng->lock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/hal.c | 22 ++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/hal.h | 2 ++
2 files changed, 24 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index eaa0edca55761..5dbf5596c9e8e 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -947,6 +947,7 @@ int ath11k_hal_srng_setup(struct ath11k_base *ab, enum hal_ring_type type,
srng->msi_data = params->msi_data;
srng->initialized = 1;
spin_lock_init(&srng->lock);
+ lockdep_set_class(&srng->lock, hal->srng_key + ring_id);
for (i = 0; i < HAL_SRNG_NUM_REG_GRP; i++) {
srng->hwreg_base[i] = srng_config->reg_start[i] +
@@ -1233,6 +1234,24 @@ static int ath11k_hal_srng_create_config(struct ath11k_base *ab)
return 0;
}
+static void ath11k_hal_register_srng_key(struct ath11k_base *ab)
+{
+ struct ath11k_hal *hal = &ab->hal;
+ u32 ring_id;
+
+ for (ring_id = 0; ring_id < HAL_SRNG_RING_ID_MAX; ring_id++)
+ lockdep_register_key(hal->srng_key + ring_id);
+}
+
+static void ath11k_hal_unregister_srng_key(struct ath11k_base *ab)
+{
+ struct ath11k_hal *hal = &ab->hal;
+ u32 ring_id;
+
+ for (ring_id = 0; ring_id < HAL_SRNG_RING_ID_MAX; ring_id++)
+ lockdep_unregister_key(hal->srng_key + ring_id);
+}
+
int ath11k_hal_srng_init(struct ath11k_base *ab)
{
struct ath11k_hal *hal = &ab->hal;
@@ -1252,6 +1271,8 @@ int ath11k_hal_srng_init(struct ath11k_base *ab)
if (ret)
goto err_free_cont_rdp;
+ ath11k_hal_register_srng_key(ab);
+
return 0;
err_free_cont_rdp:
@@ -1266,6 +1287,7 @@ void ath11k_hal_srng_deinit(struct ath11k_base *ab)
{
struct ath11k_hal *hal = &ab->hal;
+ ath11k_hal_unregister_srng_key(ab);
ath11k_hal_free_cont_rdp(ab);
ath11k_hal_free_cont_wrp(ab);
kfree(hal->srng_config);
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index 35ed3a14e200a..7fdcd8bbf7e98 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -901,6 +901,8 @@ struct ath11k_hal {
/* shadow register configuration */
u32 shadow_reg_addr[HAL_SHADOW_NUM_REGS];
int num_shadow_reg_configured;
+
+ struct lock_class_key srng_key[HAL_SRNG_RING_ID_MAX];
};
u32 ath11k_hal_reo_qdesc_size(u32 ba_window_size, u8 tid);
--
2.34.1
From: Bart Van Assche <[email protected]>
[ Upstream commit 3489c34bd02b73a72646037d673a122a53cee174 ]
Fix the following kernel crash:
Unable to handle kernel paging request at virtual address ffffffc91e735000
Call trace:
__queue_work+0x26c/0x624
queue_work_on+0x6c/0xf0
ufshcd_hold+0x12c/0x210
__ufshcd_wl_suspend+0xc0/0x400
ufshcd_wl_shutdown+0xb8/0xcc
device_shutdown+0x184/0x224
kernel_restart+0x4c/0x124
__arm64_sys_reboot+0x194/0x264
el0_svc_common+0xc8/0x1d4
do_el0_svc+0x30/0x8c
el0_svc+0x20/0x30
el0_sync_handler+0x84/0xe4
el0_sync+0x1bc/0x1c0
Fix this crash by ungating the clock before destroying the work queue on
which clock gating work is queued.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Bean Huo <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 300bf00765d5b..ae7bdd8703198 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1657,7 +1657,8 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
bool flush_result;
unsigned long flags;
- if (!ufshcd_is_clkgating_allowed(hba))
+ if (!ufshcd_is_clkgating_allowed(hba) ||
+ !hba->clk_gating.is_initialized)
goto out;
spin_lock_irqsave(hba->host->host_lock, flags);
hba->clk_gating.active_reqs++;
@@ -1817,7 +1818,7 @@ static void __ufshcd_release(struct ufs_hba *hba)
if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended ||
hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL ||
- hba->outstanding_tasks ||
+ hba->outstanding_tasks || !hba->clk_gating.is_initialized ||
hba->active_uic_cmd || hba->uic_async_done ||
hba->clk_gating.state == CLKS_OFF)
return;
@@ -1952,11 +1953,15 @@ static void ufshcd_exit_clk_gating(struct ufs_hba *hba)
{
if (!hba->clk_gating.is_initialized)
return;
+
ufshcd_remove_clk_gating_sysfs(hba);
- cancel_work_sync(&hba->clk_gating.ungate_work);
- cancel_delayed_work_sync(&hba->clk_gating.gate_work);
- destroy_workqueue(hba->clk_gating.clk_gating_workq);
+
+ /* Ungate the clock if necessary. */
+ ufshcd_hold(hba, false);
hba->clk_gating.is_initialized = false;
+ ufshcd_release(hba);
+
+ destroy_workqueue(hba->clk_gating.clk_gating_workq);
}
/* Must be called with host lock acquired */
--
2.34.1
From: Stephan Gerhold <[email protected]>
[ Upstream commit a7d9436a6c85fcb8843c910fd323dcd7f839bf63 ]
Using icc-rpm on ARM32 currently results in clk_set_rate() errors during
boot, e.g. "bus clk_set_rate error: -22". This is very similar to commit
7381e27b1e56 ("interconnect: qcom: msm8974: Prevent integer overflow in rate")
where the u64 is converted to a signed long during clock rate rounding,
resulting in an overflow on 32-bit platforms.
Let's fix it similarly by making sure that the rate does not exceed
LONG_MAX. Such high clock rates will surely result in the maximum
frequency of the bus anyway.
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/interconnect/qcom/icc-rpm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 54de49ca7808a..ddf1805ded0c0 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -68,6 +68,7 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
rate = max(sum_bw, max_peak_bw);
do_div(rate, qn->buswidth);
+ rate = min_t(u64, rate, LONG_MAX);
if (qn->rate == rate)
return 0;
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 2c45e343c581091835c9047ed5298518aa133163 ]
The atomisp driver originally used the s_parm command to
initialize the run_mode type to the driver. So, before start
setting up the streaming, s_parm should be called.
So, even having 5 "normal" video devices, one meant to be used
for each type, the run_mode was actually selected when
s_parm is called.
Without setting the run mode, applications that don't call
VIDIOC_SET_PARM with a custom atomisp parameters won't work, as
the pipeline won't be set:
atomisp-isp2 0000:00:03.0: can't create streams
atomisp-isp2 0000:00:03.0: __get_frame_info 1600x1200 (padded to 0) returned -22
However, commit 8a7c5594c020 ("media: v4l2-ioctl: clear fields in s_parm")
broke support for it, with a good reason, as drivers shoudn't be
extending the API for their own purposes.
So, as an step to allow generic apps to use this driver, put
the device's run_mode in preview after open.
After this patch, using v4l2grab starts to work on preview
mode (/dev/video2):
$ v4l2grab -f YUYV -x 1600 -y 1200 -d /dev/video2 -n 1 -u
$ feh out000.pnm
So, let's just setup the default run_mode that each video devnode
should assume, setting it at open() time.
Reported-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_fops.c | 5 +++++
.../staging/media/atomisp/pci/atomisp_subdev.c | 15 ++++++++++-----
.../staging/media/atomisp/pci/atomisp_subdev.h | 3 +++
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 4 +++-
drivers/staging/media/atomisp/pci/atomisp_v4l2.h | 3 ++-
5 files changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_fops.c b/drivers/staging/media/atomisp/pci/atomisp_fops.c
index 02c19b92bdccb..18fff47bd25d2 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_fops.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_fops.c
@@ -877,6 +877,11 @@ done:
else
pipe->users++;
rt_mutex_unlock(&isp->mutex);
+
+ /* Ensure that a mode is set */
+ if (asd)
+ v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode);
+
return 0;
css_error:
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.c b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
index 12f22ad007c73..ffaf11e0b0ad8 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
@@ -1164,23 +1164,28 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd)
atomisp_init_acc_pipe(asd, &asd->video_acc);
- ret = atomisp_video_init(&asd->video_in, "MEMORY");
+ ret = atomisp_video_init(&asd->video_in, "MEMORY",
+ ATOMISP_RUN_MODE_SDV);
if (ret < 0)
return ret;
- ret = atomisp_video_init(&asd->video_out_capture, "CAPTURE");
+ ret = atomisp_video_init(&asd->video_out_capture, "CAPTURE",
+ ATOMISP_RUN_MODE_STILL_CAPTURE);
if (ret < 0)
return ret;
- ret = atomisp_video_init(&asd->video_out_vf, "VIEWFINDER");
+ ret = atomisp_video_init(&asd->video_out_vf, "VIEWFINDER",
+ ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE);
if (ret < 0)
return ret;
- ret = atomisp_video_init(&asd->video_out_preview, "PREVIEW");
+ ret = atomisp_video_init(&asd->video_out_preview, "PREVIEW",
+ ATOMISP_RUN_MODE_PREVIEW);
if (ret < 0)
return ret;
- ret = atomisp_video_init(&asd->video_out_video_capture, "VIDEO");
+ ret = atomisp_video_init(&asd->video_out_video_capture, "VIDEO",
+ ATOMISP_RUN_MODE_VIDEO);
if (ret < 0)
return ret;
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.h b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
index d6fcfab6352d7..a8d210ea5f8be 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
@@ -81,6 +81,9 @@ struct atomisp_video_pipe {
/* the link list to store per_frame parameters */
struct list_head per_frame_params;
+ /* Store here the initial run mode */
+ unsigned int default_run_mode;
+
unsigned int buffers_in_css;
/* irq_lock is used to protect video buffer state change operations and
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index 7982cc143374a..14c39b8987c95 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -447,7 +447,8 @@ const struct atomisp_dfs_config dfs_config_cht_soc = {
.dfs_table_size = ARRAY_SIZE(dfs_rules_cht_soc),
};
-int atomisp_video_init(struct atomisp_video_pipe *video, const char *name)
+int atomisp_video_init(struct atomisp_video_pipe *video, const char *name,
+ unsigned int run_mode)
{
int ret;
const char *direction;
@@ -478,6 +479,7 @@ int atomisp_video_init(struct atomisp_video_pipe *video, const char *name)
"ATOMISP ISP %s %s", name, direction);
video->vdev.release = video_device_release_empty;
video_set_drvdata(&video->vdev, video->isp);
+ video->default_run_mode = run_mode;
return 0;
}
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.h b/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
index 81bb356b81720..72611b8286a4a 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
@@ -27,7 +27,8 @@ struct v4l2_device;
struct atomisp_device;
struct firmware;
-int atomisp_video_init(struct atomisp_video_pipe *video, const char *name);
+int atomisp_video_init(struct atomisp_video_pipe *video, const char *name,
+ unsigned int run_mode);
void atomisp_acc_init(struct atomisp_acc_pipe *video, const char *name);
void atomisp_video_unregister(struct atomisp_video_pipe *video);
void atomisp_acc_unregister(struct atomisp_acc_pipe *video);
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit 57d2dbf710d832841872fb15ebb79429cab90fae ]
The GPD win and its sibling the GPD pocket (99% the same electronics in a
different case) use a PCI wifi card. But the ACPI tables on both variants
contain a bug where the SDIO MMC controller for SDIO wifi cards is enabled
despite this. This SDIO MMC controller has a PCI0.SDHB.BRC1 child-device
which _PS3 method sets a GPIO causing the PCI wifi card to turn off.
At the moment there is a pretty ugly kludge in the sdhci-acpi.c code,
just to work around the bug in the DSDT of this single design. This can
be solved cleaner/simply with a quirk overriding the _STA return of the
broken PCI0.SDHB.BRC1 PCI0.SDHB.BRC1 child with a status value of 0,
so that its power_manageable flag gets cleared, avoiding this problem.
Note that even though it is not used, the _STA method for the MMC
controller is deliberately not overridden. If the status of the MMC
controller were forced to 0 it would never get suspended, which would
cause these mini-laptops to not reach S0i3 level when suspended.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/x86/utils.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index 190bfc2ab3f26..b3fb428461c6f 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -94,9 +94,10 @@ static const struct override_status_id override_status_ids[] = {
/*
* The GPD win BIOS dated 20170221 has disabled the accelerometer, the
* drivers sometimes cause crashes under Windows and this is how the
- * manufacturer has solved this :| Note that the the DMI data is less
- * generic then it seems, a board_vendor of "AMI Corporation" is quite
- * rare and a board_name of "Default String" also is rare.
+ * manufacturer has solved this :| The DMI match may not seem unique,
+ * but it is. In the 67000+ DMI decode dumps from linux-hardware.org
+ * only 116 have board_vendor set to "AMI Corporation" and of those 116
+ * only the GPD win and pocket entries' board_name is "Default string".
*
* Unfortunately the GPD pocket also uses these strings and its BIOS
* was copy-pasted from the GPD win, so it has a disabled KIOX000A
@@ -120,6 +121,19 @@ static const struct override_status_id override_status_ids[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
DMI_MATCH(DMI_BIOS_DATE, "05/25/2017")
}),
+
+ /*
+ * The GPD win/pocket have a PCI wifi card, but its DSDT has the SDIO
+ * mmc controller enabled and that has a child-device which _PS3
+ * method sets a GPIO causing the PCI wifi card to turn off.
+ * See above remark about uniqueness of the DMI match.
+ */
+ NOT_PRESENT_ENTRY_PATH("\\_SB_.PCI0.SDHB.BRC1", ATOM_AIRMONT, {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+ DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ }),
};
bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status)
--
2.34.1
From: Stephan Müller <[email protected]>
[ Upstream commit 552d03a223eda3df84526ab2c1f4d82e15eaee7a ]
The APT compares the current time stamp with a pre-set value. The
current code only considered the 4 LSB only. Yet, after reviews by
mathematicians of the user space Jitter RNG version >= 3.1.0, it was
concluded that the APT can be calculated on the 32 LSB of the time
delta. Thi change is applied to the kernel.
This fixes a bug where an AMD EPYC fails this test as its RDTSC value
contains zeros in the LSB. The most appropriate fix would have been to
apply a GCD calculation and divide the time stamp by the GCD. Yet, this
is a significant code change that will be considered for a future
update. Note, tests showed that constantly the GCD always was 32 on
these systems, i.e. the 5 LSB were always zero (thus failing the APT
since it only considered the 4 LSB for its calculation).
Signed-off-by: Stephan Mueller <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/jitterentropy.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/crypto/jitterentropy.c b/crypto/jitterentropy.c
index a11b3208760f3..f6d3a84e3c214 100644
--- a/crypto/jitterentropy.c
+++ b/crypto/jitterentropy.c
@@ -265,7 +265,6 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
{
__u64 delta2 = jent_delta(ec->last_delta, current_delta);
__u64 delta3 = jent_delta(ec->last_delta2, delta2);
- unsigned int delta_masked = current_delta & JENT_APT_WORD_MASK;
ec->last_delta = current_delta;
ec->last_delta2 = delta2;
@@ -274,7 +273,7 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
* Insert the result of the comparison of two back-to-back time
* deltas.
*/
- jent_apt_insert(ec, delta_masked);
+ jent_apt_insert(ec, current_delta);
if (!current_delta || !delta2 || !delta3) {
/* RCT with a stuck bit */
--
2.34.1
From: Sean Young <[email protected]>
[ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ]
Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/igorplugusb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/rc/igorplugusb.c b/drivers/media/rc/igorplugusb.c
index effaa5751d6c9..3e9988ee785f0 100644
--- a/drivers/media/rc/igorplugusb.c
+++ b/drivers/media/rc/igorplugusb.c
@@ -64,9 +64,11 @@ static void igorplugusb_irdata(struct igorplugusb *ir, unsigned len)
if (start >= len) {
dev_err(ir->dev, "receive overflow invalid: %u", overflow);
} else {
- if (overflow > 0)
+ if (overflow > 0) {
dev_warn(ir->dev, "receive overflow, at least %u lost",
overflow);
+ ir_raw_event_reset(ir->rc);
+ }
do {
rawir.duration = ir->buf_in[i] * 85;
--
2.34.1
From: Zack Rusin <[email protected]>
[ Upstream commit 28b5f3b6121b7db2a44be499cfca0b6b801588b6 ]
The ttm mem global state was leaking if the vmwgfx driver load failed.
In case of a driver load failure we have to make sure we also release
the ttm mem global state.
Signed-off-by: Zack Rusin <[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index ab9a1750e1dff..8d0b083ba267f 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -1617,34 +1617,40 @@ static int vmw_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &driver);
if (ret)
- return ret;
+ goto out_error;
ret = pcim_enable_device(pdev);
if (ret)
- return ret;
+ goto out_error;
vmw = devm_drm_dev_alloc(&pdev->dev, &driver,
struct vmw_private, drm);
- if (IS_ERR(vmw))
- return PTR_ERR(vmw);
+ if (IS_ERR(vmw)) {
+ ret = PTR_ERR(vmw);
+ goto out_error;
+ }
pci_set_drvdata(pdev, &vmw->drm);
ret = ttm_mem_global_init(&ttm_mem_glob, &pdev->dev);
if (ret)
- return ret;
+ goto out_error;
ret = vmw_driver_load(vmw, ent->device);
if (ret)
- return ret;
+ goto out_release;
ret = drm_dev_register(&vmw->drm, 0);
- if (ret) {
- vmw_driver_unload(&vmw->drm);
- return ret;
- }
+ if (ret)
+ goto out_unload;
return 0;
+out_unload:
+ vmw_driver_unload(&vmw->drm);
+out_release:
+ ttm_mem_global_release(&ttm_mem_glob);
+out_error:
+ return ret;
}
static int __init vmwgfx_init(void)
--
2.34.1
From: Julia Lawall <[email protected]>
[ Upstream commit a841fd009e51c8c0a8f07c942e9ab6bb48da8858 ]
for_each_node_by_name performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e,e1;
local idexpression n;
@@
for_each_node_by_name(n, e1) {
... when != of_node_put(n)
when != e = n
(
return n;
|
+ of_node_put(n);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/cell/iommu.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index fa08699aedeb8..d32f24de84798 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -977,6 +977,7 @@ static int __init cell_iommu_fixed_mapping_init(void)
if (hbase < dbase || (hend > (dbase + dsize))) {
pr_debug("iommu: hash window doesn't fit in"
"real DMA window\n");
+ of_node_put(np);
return -1;
}
}
--
2.34.1
From: Thomas Weißschuh <[email protected]>
[ Upstream commit e96c1197aca628f7d2480a1cc3214912b40b3414 ]
The EC/ACPI firmware on Lenovo ThinkPads used to report a status
of "Unknown" when the battery is between the charge start and
charge stop thresholds. On Windows, it reports "Not Charging"
so the quirk has been added to also report correctly.
Now the "status" attribute returns "Not Charging" when the
battery on ThinkPads is not physicaly charging.
Signed-off-by: Thomas Weißschuh <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/battery.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 8afa85d6eb6a7..ead0114f27c9f 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -53,6 +53,7 @@ static int battery_bix_broken_package;
static int battery_notification_delay_ms;
static int battery_ac_is_broken;
static int battery_check_pmic = 1;
+static int battery_quirk_notcharging;
static unsigned int cache_time = 1000;
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
@@ -217,6 +218,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (acpi_battery_is_charged(battery))
val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (battery_quirk_notcharging)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
else
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
break;
@@ -1111,6 +1114,12 @@ battery_do_not_check_pmic_quirk(const struct dmi_system_id *d)
return 0;
}
+static int __init battery_quirk_not_charging(const struct dmi_system_id *d)
+{
+ battery_quirk_notcharging = 1;
+ return 0;
+}
+
static const struct dmi_system_id bat_dmi_table[] __initconst = {
{
/* NEC LZ750/LS */
@@ -1155,6 +1164,19 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
},
},
+ {
+ /*
+ * On Lenovo ThinkPads the BIOS specification defines
+ * a state when the bits for charging and discharging
+ * are both set to 0. That state is "Not Charging".
+ */
+ .callback = battery_quirk_not_charging,
+ .ident = "Lenovo ThinkPad",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
+ },
+ },
{},
};
--
2.34.1
From: Mark Langsdorf <[email protected]>
[ Upstream commit f81bdeaf816142e0729eea0cc84c395ec9673151 ]
ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1
The current ACPI_ACCESS_*_WIDTH defines do not provide a way to
test that size is small enough to not cause an overflow when
applied to a 32-bit integer.
Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT,
ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and
redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines.
This was inititally reported on Linux where a size of 102 in
ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR
initialization code.
Link: https://github.com/acpica/acpica/commit/bc02c76d
Signed-off-by: Mark Langsdorf <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/acpi/actypes.h | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 92c71dfce0d5d..cefbb7ad253e0 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -536,8 +536,14 @@ typedef u64 acpi_integer;
* Can be used with access_width of struct acpi_generic_address and access_size of
* struct acpi_resource_generic_register.
*/
-#define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + 2))
-#define ACPI_ACCESS_BYTE_WIDTH(size) (1 << ((size) - 1))
+#define ACPI_ACCESS_BIT_SHIFT 2
+#define ACPI_ACCESS_BYTE_SHIFT -1
+#define ACPI_ACCESS_BIT_MAX (31 - ACPI_ACCESS_BIT_SHIFT)
+#define ACPI_ACCESS_BYTE_MAX (31 - ACPI_ACCESS_BYTE_SHIFT)
+#define ACPI_ACCESS_BIT_DEFAULT (8 - ACPI_ACCESS_BIT_SHIFT)
+#define ACPI_ACCESS_BYTE_DEFAULT (8 - ACPI_ACCESS_BYTE_SHIFT)
+#define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BIT_SHIFT))
+#define ACPI_ACCESS_BYTE_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BYTE_SHIFT))
/*******************************************************************************
*
--
2.34.1
From: Kyeong Yoo <[email protected]>
[ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ]
GC task can deadlock in read_cache_page() because it may attempt
to release a page that is actually allocated by another task in
jffs2_write_begin().
The reason is that in jffs2_write_begin() there is a small window
a cache page is allocated for use but not set Uptodate yet.
This ends up with a deadlock between two tasks:
1) A task (e.g. file copy)
- jffs2_write_begin() locks a cache page
- jffs2_write_end() tries to lock "alloc_sem" from
jffs2_reserve_space() <-- STUCK
2) GC task (jffs2_gcd_mtd3)
- jffs2_garbage_collect_pass() locks "alloc_sem"
- try to lock the same cache page in read_cache_page() <-- STUCK
So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin()
while reading data in a cache page.
Signed-off-by: Kyeong Yoo <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jffs2/file.c | 40 +++++++++++++++++++++++++---------------
1 file changed, 25 insertions(+), 15 deletions(-)
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 4fc8cd698d1a4..bd7d58d27bfc6 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -136,20 +136,15 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
struct page *pg;
struct inode *inode = mapping->host;
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
pgoff_t index = pos >> PAGE_SHIFT;
uint32_t pageofs = index << PAGE_SHIFT;
int ret = 0;
- pg = grab_cache_page_write_begin(mapping, index, flags);
- if (!pg)
- return -ENOMEM;
- *pagep = pg;
-
jffs2_dbg(1, "%s()\n", __func__);
if (pageofs > inode->i_size) {
/* Make new hole frag from old EOF to new page */
- struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
struct jffs2_raw_inode ri;
struct jffs2_full_dnode *fn;
uint32_t alloc_len;
@@ -160,7 +155,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
if (ret)
- goto out_page;
+ goto out_err;
mutex_lock(&f->sem);
memset(&ri, 0, sizeof(ri));
@@ -190,7 +185,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
ret = PTR_ERR(fn);
jffs2_complete_reservation(c);
mutex_unlock(&f->sem);
- goto out_page;
+ goto out_err;
}
ret = jffs2_add_full_dnode_to_inode(c, f, fn);
if (f->metadata) {
@@ -205,13 +200,26 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
jffs2_free_full_dnode(fn);
jffs2_complete_reservation(c);
mutex_unlock(&f->sem);
- goto out_page;
+ goto out_err;
}
jffs2_complete_reservation(c);
inode->i_size = pageofs;
mutex_unlock(&f->sem);
}
+ /*
+ * While getting a page and reading data in, lock c->alloc_sem until
+ * the page is Uptodate. Otherwise GC task may attempt to read the same
+ * page in read_cache_page(), which causes a deadlock.
+ */
+ mutex_lock(&c->alloc_sem);
+ pg = grab_cache_page_write_begin(mapping, index, flags);
+ if (!pg) {
+ ret = -ENOMEM;
+ goto release_sem;
+ }
+ *pagep = pg;
+
/*
* Read in the page if it wasn't already present. Cannot optimize away
* the whole page write case until jffs2_write_end can handle the
@@ -221,15 +229,17 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
mutex_lock(&f->sem);
ret = jffs2_do_readpage_nolock(inode, pg);
mutex_unlock(&f->sem);
- if (ret)
- goto out_page;
+ if (ret) {
+ unlock_page(pg);
+ put_page(pg);
+ goto release_sem;
+ }
}
jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags);
- return ret;
-out_page:
- unlock_page(pg);
- put_page(pg);
+release_sem:
+ mutex_unlock(&c->alloc_sem);
+out_err:
return ret;
}
--
2.34.1
On 2022-01-24 19:31, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.17 release.
Oh noes :(
DESCEND bpf/resolve_btfids
MKDIR /tmp/linux-5.15.17/tools/bpf/resolve_btfids//libbpf
GEN /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/bpf_helper_defs.h
MKDIR /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/
CC /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf.o
libbpf.c: In function 'bpf_object__elf_collect':
libbpf.c:3038:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
3038 | if (sh->sh_type != SHT_PROGBITS)
| ^~
libbpf.c:3042:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
3042 | if (sh->sh_type != SHT_PROGBITS)
| ^~
make[4]: *** [/tmp/linux-5.15.17/tools/build/Makefile.build:97: /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf.o] Error 1
make[3]: *** [Makefile:158: /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf-in.o] Error 2
make[2]: *** [Makefile:44: /tmp/linux-5.15.17/tools/bpf/resolve_btfids//libbpf/libbpf.a] Error 2
make[1]: *** [Makefile:72: bpf/resolve_btfids] Error 2
make: *** [Makefile:1371: tools/bpf/resolve_btfids] Error 2
Reverting "libbpf-validate-that-.btf-and-.btf.ext-sections-cont.patcht" aka
this one:
> Andrii Nakryiko <[email protected]>
> libbpf: Validate that .BTF and .BTF.ext sections contain data
makes it build & run fine. I looked for followups but couldn't find anything that
stood out, maybe the BPF folks (cc'ed) know what's missing/wrong.
cheers
Holger
From: Kirill A. Shutemov <[email protected]>
[ Upstream commit 1d4e0b3abb168b2ee1eca99c527cffa1b80b6161 ]
ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e
According to ACPI 6.4, Section 16.2, the CPU cache flushing is
required on entering to S1, S2, and S3, but the ACPICA code
flushes the CPU cache regardless of the sleep state.
Blind cache flush on entering S5 causes problems for TDX.
Flushing happens with WBINVD that is not supported in the TDX
environment.
TDX only supports S5 and adjusting ACPICA code to conform to the
spec more strictly fixes the issue.
Link: https://github.com/acpica/acpica/commit/3dd7e1f3
Signed-off-by: Kirill A. Shutemov <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/hwesleep.c | 4 +++-
drivers/acpi/acpica/hwsleep.c | 4 +++-
drivers/acpi/acpica/hwxfsleep.c | 2 --
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index 808fdf54aeebf..7ee2939c08cd4 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -104,7 +104,9 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state)
/* Flush caches, as per ACPI specification */
- ACPI_FLUSH_CPU_CACHE();
+ if (sleep_state < ACPI_STATE_S4) {
+ ACPI_FLUSH_CPU_CACHE();
+ }
status = acpi_os_enter_sleep(sleep_state, sleep_control, 0);
if (status == AE_CTRL_TERMINATE) {
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 34a3825f25d37..5efa3d8e483e0 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -110,7 +110,9 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
/* Flush caches, as per ACPI specification */
- ACPI_FLUSH_CPU_CACHE();
+ if (sleep_state < ACPI_STATE_S4) {
+ ACPI_FLUSH_CPU_CACHE();
+ }
status = acpi_os_enter_sleep(sleep_state, pm1a_control, pm1b_control);
if (status == AE_CTRL_TERMINATE) {
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index e4cde23a29061..ba77598ee43e8 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -162,8 +162,6 @@ acpi_status acpi_enter_sleep_state_s4bios(void)
return_ACPI_STATUS(status);
}
- ACPI_FLUSH_CPU_CACHE();
-
status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
(u32)acpi_gbl_FADT.s4_bios_request, 8);
if (ACPI_FAILURE(status)) {
--
2.34.1
From: Tedd Ho-Jeong An <[email protected]>
[ Upstream commit 3547a008c8962df2175db1e78b80f27e027ec549 ]
This patch add missing HCI quirks and MSFT extension for legacy
bootloader when it is running in the operational firmware.
Signed-off-by: Tedd Ho-Jeong An <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btintel.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 525be2e1fbb25..e73d4c719b0ad 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -2330,10 +2330,14 @@ static int btintel_setup_combined(struct hci_dev *hdev)
case 0x12: /* ThP */
case 0x13: /* HrP */
case 0x14: /* CcP */
- /* Some legacy bootloader devices from JfP supports both old
- * and TLV based HCI_Intel_Read_Version command. But we don't
- * want to use the TLV based setup routines for those legacy
- * bootloader device.
+ /* Some legacy bootloader devices starting from JfP,
+ * the operational firmware supports both old and TLV based
+ * HCI_Intel_Read_Version command based on the command
+ * parameter.
+ *
+ * For upgrading firmware case, the TLV based version cannot
+ * be used because the firmware filename for legacy bootloader
+ * is based on the old format.
*
* Also, it is not easy to convert TLV based version from the
* legacy version format.
@@ -2345,6 +2349,20 @@ static int btintel_setup_combined(struct hci_dev *hdev)
err = btintel_read_version(hdev, &ver);
if (err)
return err;
+
+ /* Apply the device specific HCI quirks
+ *
+ * All Legacy bootloader devices support WBS
+ */
+ set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
+ /* Valid LE States quirk for JfP/ThP familiy */
+ if (ver.hw_variant == 0x11 || ver.hw_variant == 0x12)
+ set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
+ /* Setup MSFT Extension support */
+ btintel_set_msft_opcode(hdev, ver.hw_variant);
+
err = btintel_bootloader_setup(hdev, &ver);
break;
case 0x17:
--
2.34.1
From: David Gow <[email protected]>
[ Upstream commit 37dbb4c7c7442dbfc9b651e4ddd4afe30b26afc9 ]
It's possible that a parameterised test could end up with zero
parameters. At the moment, the test function will nevertheless be called
with NULL as the parameter. Instead, don't try to run the test code, and
just mark the test as SKIPped.
Reported-by: Daniel Latypov <[email protected]>
Signed-off-by: David Gow <[email protected]>
Reviewed-by: Daniel Latypov <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/kunit/test.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/lib/kunit/test.c b/lib/kunit/test.c
index f246b847024e3..9aef816e573c1 100644
--- a/lib/kunit/test.c
+++ b/lib/kunit/test.c
@@ -504,16 +504,18 @@ int kunit_run_tests(struct kunit_suite *suite)
struct kunit_result_stats param_stats = { 0 };
test_case->status = KUNIT_SKIPPED;
- if (test_case->generate_params) {
+ if (!test_case->generate_params) {
+ /* Non-parameterised test. */
+ kunit_run_case_catch_errors(suite, test_case, &test);
+ kunit_update_stats(¶m_stats, test.status);
+ } else {
/* Get initial param. */
param_desc[0] = '\0';
test.param_value = test_case->generate_params(NULL, param_desc);
- }
- do {
- kunit_run_case_catch_errors(suite, test_case, &test);
+ while (test.param_value) {
+ kunit_run_case_catch_errors(suite, test_case, &test);
- if (test_case->generate_params) {
if (param_desc[0] == '\0') {
snprintf(param_desc, sizeof(param_desc),
"param-%d", test.param_index);
@@ -530,11 +532,11 @@ int kunit_run_tests(struct kunit_suite *suite)
param_desc[0] = '\0';
test.param_value = test_case->generate_params(test.param_value, param_desc);
test.param_index++;
- }
- kunit_update_stats(¶m_stats, test.status);
+ kunit_update_stats(¶m_stats, test.status);
+ }
+ }
- } while (test.param_value);
kunit_print_test_stats(&test, param_stats);
--
2.34.1
From: Jiri Olsa <[email protected]>
[ Upstream commit 5e22dd18626726028a93ff1350a8a71a00fd843d ]
The tc_redirect umounts /sys in the new namespace, which can be
mounted as shared and cause global umount. The lazy umount also
takes down mounted trees under /sys like debugfs, which won't be
available after sysfs mounts again and could cause fails in other
tests.
# cat /proc/self/mountinfo | grep debugfs
34 23 0:7 / /sys/kernel/debug rw,nosuid,nodev,noexec,relatime shared:14 - debugfs debugfs rw
# cat /proc/self/mountinfo | grep sysfs
23 86 0:22 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw
# mount | grep debugfs
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
# ./test_progs -t tc_redirect
#164 tc_redirect:OK
Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
# mount | grep debugfs
# cat /proc/self/mountinfo | grep debugfs
# cat /proc/self/mountinfo | grep sysfs
25 86 0:22 / /sys rw,relatime shared:2 - sysfs sysfs rw
Making the sysfs private under the new namespace so the umount won't
trigger the global sysfs umount.
Reported-by: Hangbin Liu <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Jussi Maki <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/tc_redirect.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
index e7201ba29ccd6..47e3159729d21 100644
--- a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
+++ b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
@@ -105,6 +105,13 @@ static int setns_by_fd(int nsfd)
if (!ASSERT_OK(err, "unshare"))
return err;
+ /* Make our /sys mount private, so the following umount won't
+ * trigger the global umount in case it's shared.
+ */
+ err = mount("none", "/sys", NULL, MS_PRIVATE, NULL);
+ if (!ASSERT_OK(err, "remount private /sys"))
+ return err;
+
err = umount2("/sys", MNT_DETACH);
if (!ASSERT_OK(err, "umount2 /sys"))
return err;
--
2.34.1
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 00558586382891540c59c9febc671062425a6e47 ]
When a new USB device gets plugged to nested hubs, the affected hub,
which connects to usb 2-1.4-port2, doesn't report there's any change,
hence the nested hubs go back to runtime suspend like nothing happened:
[ 281.032951] usb usb2: usb wakeup-resume
[ 281.032959] usb usb2: usb auto-resume
[ 281.032974] hub 2-0:1.0: hub_resume
[ 281.033011] usb usb2-port1: status 0263 change 0000
[ 281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.049797] usb 2-1: usb wakeup-resume
[ 281.069800] usb 2-1: Waited 0ms for CONNECT
[ 281.069810] usb 2-1: finish resume
[ 281.070026] hub 2-1:1.0: hub_resume
[ 281.070250] usb 2-1-port4: status 0203 change 0000
[ 281.070272] usb usb2-port1: resume, status 0
[ 281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 281.089813] usb 2-1.4: usb wakeup-resume
[ 281.109792] usb 2-1.4: Waited 0ms for CONNECT
[ 281.109801] usb 2-1.4: finish resume
[ 281.109991] hub 2-1.4:1.0: hub_resume
[ 281.110147] usb 2-1.4-port2: status 0263 change 0000
[ 281.110234] usb 2-1-port4: resume, status 0
[ 281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[ 281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.110426] hub 2-1.4:1.0: hub_suspend
[ 281.110565] usb 2-1.4: usb auto-suspend, wakeup 1
[ 281.130998] hub 2-1:1.0: hub_suspend
[ 281.137788] usb 2-1: usb auto-suspend, wakeup 1
[ 281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.177828] usb 2-1: usb wakeup-resume
[ 281.197839] usb 2-1: Waited 0ms for CONNECT
[ 281.197850] usb 2-1: finish resume
[ 281.197984] hub 2-1:1.0: hub_resume
[ 281.198203] usb 2-1-port4: status 0203 change 0000
[ 281.198228] usb usb2-port1: resume, status 0
[ 281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 281.217835] usb 2-1.4: usb wakeup-resume
[ 281.237834] usb 2-1.4: Waited 0ms for CONNECT
[ 281.237845] usb 2-1.4: finish resume
[ 281.237990] hub 2-1.4:1.0: hub_resume
[ 281.238067] usb 2-1.4-port2: status 0263 change 0000
[ 281.238148] usb 2-1-port4: resume, status 0
[ 281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[ 281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.238385] hub 2-1.4:1.0: hub_suspend
[ 281.238523] usb 2-1.4: usb auto-suspend, wakeup 1
[ 281.258076] hub 2-1:1.0: hub_suspend
[ 281.265744] usb 2-1: usb auto-suspend, wakeup 1
[ 281.285976] hub 2-0:1.0: hub_suspend
[ 281.285988] usb usb2: bus auto-suspend, wakeup 1
USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If
the link is in a non-U0 state, then the device must transition the link
to U0 prior to sending the remote wake message", but the hub only
transits the link to U0 after signaling remote wakeup.
So be more forgiving and use a 20ms delay to let the link transit to U0
for remote wakeup.
Suggested-by: Alan Stern <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/hub.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3bc4a86c3d0a5..ac6c5ccfe1cb7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1110,7 +1110,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
} else {
hub_power_on(hub, true);
}
- }
+ /* Give some time on remote wakeup to let links to transit to U0 */
+ } else if (hub_is_superspeed(hub->hdev))
+ msleep(20);
+
init2:
/*
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit ba46e42e925b5d09b4e441f8de3db119cc7df58f ]
Not all ACPI-devices have a HID + UID, allow specifying quirks for
acpi_device_override_status() by path too.
Note this moves the path/HID+UID check to after the CPU + DMI checks
since the path lookup is somewhat costly.
This way this lookup is only done on devices where the other checks
match.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/x86/utils.c | 42 ++++++++++++++++++++++++++++++----------
1 file changed, 32 insertions(+), 10 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index edb4f3fd93dc3..190bfc2ab3f26 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -38,22 +38,30 @@ struct override_status_id {
struct x86_cpu_id cpu_ids[2];
struct dmi_system_id dmi_ids[2]; /* Optional */
const char *uid;
+ const char *path;
unsigned long long status;
};
-#define ENTRY(status, hid, uid, cpu_model, dmi...) { \
+#define ENTRY(status, hid, uid, path, cpu_model, dmi...) { \
{ { hid, }, {} }, \
{ X86_MATCH_INTEL_FAM6_MODEL(cpu_model, NULL), {} }, \
{ { .matches = dmi }, {} }, \
uid, \
+ path, \
status, \
}
#define PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
- ENTRY(ACPI_STA_DEFAULT, hid, uid, cpu_model, dmi)
+ ENTRY(ACPI_STA_DEFAULT, hid, uid, NULL, cpu_model, dmi)
#define NOT_PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
- ENTRY(0, hid, uid, cpu_model, dmi)
+ ENTRY(0, hid, uid, NULL, cpu_model, dmi)
+
+#define PRESENT_ENTRY_PATH(path, cpu_model, dmi...) \
+ ENTRY(ACPI_STA_DEFAULT, "", NULL, path, cpu_model, dmi)
+
+#define NOT_PRESENT_ENTRY_PATH(path, cpu_model, dmi...) \
+ ENTRY(0, "", NULL, path, cpu_model, dmi)
static const struct override_status_id override_status_ids[] = {
/*
@@ -120,13 +128,6 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
unsigned int i;
for (i = 0; i < ARRAY_SIZE(override_status_ids); i++) {
- if (acpi_match_device_ids(adev, override_status_ids[i].hid))
- continue;
-
- if (!adev->pnp.unique_id ||
- strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
- continue;
-
if (!x86_match_cpu(override_status_ids[i].cpu_ids))
continue;
@@ -134,6 +135,27 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
!dmi_check_system(override_status_ids[i].dmi_ids))
continue;
+ if (override_status_ids[i].path) {
+ struct acpi_buffer path = { ACPI_ALLOCATE_BUFFER, NULL };
+ bool match;
+
+ if (acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &path))
+ continue;
+
+ match = strcmp((char *)path.pointer, override_status_ids[i].path) == 0;
+ kfree(path.pointer);
+
+ if (!match)
+ continue;
+ } else {
+ if (acpi_match_device_ids(adev, override_status_ids[i].hid))
+ continue;
+
+ if (!adev->pnp.unique_id ||
+ strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
+ continue;
+ }
+
*status = override_status_ids[i].status;
ret = true;
break;
--
2.34.1
From: Sudeep Holla <[email protected]>
[ Upstream commit 9a3b8655db1ada31c82189ae13f40eb25da48c35 ]
ACPICA commit 41be6afacfdaec2dba3a5ed368736babc2a7aa5c
With the PCC Opregion in the firmware and we are hitting below kernel crash:
-->8
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
Workqueue: pm pm_runtime_work
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x54/0x260
lr : acpi_ex_write_data_to_field+0xb8/0x194
Call trace:
__memcpy+0x54/0x260
acpi_ex_store_object_to_node+0xa4/0x1d4
acpi_ex_store+0x44/0x164
acpi_ex_opcode_1A_1T_1R+0x25c/0x508
acpi_ds_exec_end_op+0x1b4/0x44c
acpi_ps_parse_loop+0x3a8/0x614
acpi_ps_parse_aml+0x90/0x2f4
acpi_ps_execute_method+0x11c/0x19c
acpi_ns_evaluate+0x1ec/0x2b0
acpi_evaluate_object+0x170/0x2b0
acpi_device_set_power+0x118/0x310
acpi_dev_suspend+0xd4/0x180
acpi_subsys_runtime_suspend+0x28/0x38
__rpm_callback+0x74/0x328
rpm_suspend+0x2d8/0x624
pm_runtime_work+0xa4/0xb8
process_one_work+0x194/0x25c
worker_thread+0x260/0x49c
kthread+0x14c/0x30c
ret_from_fork+0x10/0x20
Code: f9000006 f81f80a7 d65f03c0 361000c2 (b9400026)
---[ end trace 24d8a032fa77b68a ]---
The reason for the crash is that the PCC channel index passed via region.address
in acpi_ex_store_object_to_node is interpreted as the channel subtype
incorrectly.
Assuming the PCC op_region support is not used by any other type, let us
remove the subtype check as the AML has no access to the subtype information.
Once we remove it, the kernel crash disappears and correctly complains about
missing PCC Opregion handler.
ACPI Error: No handler for Region [PFRM] ((____ptrval____)) [PCC] (20210730/evregion-130)
ACPI Error: Region PCC (ID=10) has no handler (20210730/exfldio-261)
ACPI Error: Aborting method \_SB.ETH0._PS3 due to previous error (AE_NOT_EXIST) (20210730/psparse-531)
Link: https://github.com/acpica/acpica/commit/41be6afa
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/exfield.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index 06f3c9df1e22d..8618500f23b39 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -330,12 +330,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
obj_desc->field.base_byte_offset,
source_desc->buffer.pointer, data_length);
- if ((obj_desc->field.region_obj->region.address ==
- PCC_MASTER_SUBSPACE
- && MASTER_SUBSPACE_COMMAND(obj_desc->field.
- base_byte_offset))
- || GENERIC_SUBSPACE_COMMAND(obj_desc->field.
- base_byte_offset)) {
+ if (MASTER_SUBSPACE_COMMAND(obj_desc->field.base_byte_offset)) {
/* Perform the write */
--
2.34.1
From: Joe Thornber <[email protected]>
[ Upstream commit cba23ac158db7f3cd48a923d6861bee2eb7a2978 ]
Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap().
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/persistent-data/dm-space-map-common.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c
index 4a6a2a9b4eb49..bfbfa750e0160 100644
--- a/drivers/md/persistent-data/dm-space-map-common.c
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -283,6 +283,11 @@ int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result)
struct disk_index_entry ie_disk;
struct dm_block *blk;
+ if (b >= ll->nr_blocks) {
+ DMERR_LIMIT("metadata block out of bounds");
+ return -EINVAL;
+ }
+
b = do_div(index, ll->entries_per_block);
r = ll->load_ie(ll, index, &ie_disk);
if (r < 0)
--
2.34.1
From: Iwona Winiarska <[email protected]>
[ Upstream commit 61a7904b6ace99b1bde0d0e867fa3097f5c8cee2 ]
The gpio-aspeed driver implements an irq_chip which need to be invoked
from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is
no longer legal to invoke it while interrupts are disabled.
This also causes lockdep to complain about:
[ 0.649797] [ BUG: Invalid wait context ]
because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-aspeed.c | 52 +++++++++++++++++++-------------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 3c8f20c57695f..318a7d95a1a8b 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -53,7 +53,7 @@ struct aspeed_gpio_config {
struct aspeed_gpio {
struct gpio_chip chip;
struct irq_chip irqc;
- spinlock_t lock;
+ raw_spinlock_t lock;
void __iomem *base;
int irq;
const struct aspeed_gpio_config *config;
@@ -413,14 +413,14 @@ static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
unsigned long flags;
bool copro;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
__aspeed_gpio_set(gc, offset, val);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
@@ -435,7 +435,7 @@ static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
if (!have_input(gpio, offset))
return -ENOTSUPP;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
reg = ioread32(addr);
reg &= ~GPIO_BIT(offset);
@@ -445,7 +445,7 @@ static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
@@ -463,7 +463,7 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc,
if (!have_output(gpio, offset))
return -ENOTSUPP;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
reg = ioread32(addr);
reg |= GPIO_BIT(offset);
@@ -474,7 +474,7 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc,
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
@@ -492,11 +492,11 @@ static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
if (!have_output(gpio, offset))
return GPIO_LINE_DIRECTION_IN;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
val = ioread32(bank_reg(gpio, bank, reg_dir)) & GPIO_BIT(offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return val ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
}
@@ -539,14 +539,14 @@ static void aspeed_gpio_irq_ack(struct irq_data *d)
status_addr = bank_reg(gpio, bank, reg_irq_status);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
iowrite32(bit, status_addr);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
@@ -565,7 +565,7 @@ static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
addr = bank_reg(gpio, bank, reg_irq_enable);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
reg = ioread32(addr);
@@ -577,7 +577,7 @@ static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static void aspeed_gpio_irq_mask(struct irq_data *d)
@@ -629,7 +629,7 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
return -EINVAL;
}
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
addr = bank_reg(gpio, bank, reg_irq_type0);
@@ -649,7 +649,7 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
irq_set_handler_locked(d, handler);
@@ -716,7 +716,7 @@ static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
treg = bank_reg(gpio, to_bank(offset), reg_tolerance);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
val = readl(treg);
@@ -730,7 +730,7 @@ static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
@@ -856,7 +856,7 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
return rc;
}
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
if (timer_allocation_registered(gpio, offset)) {
rc = unregister_allocated_timer(gpio, offset);
@@ -916,7 +916,7 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
configure_timer(gpio, offset, i);
out:
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
@@ -927,13 +927,13 @@ static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
unsigned long flags;
int rc;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
rc = unregister_allocated_timer(gpio, offset);
if (!rc)
configure_timer(gpio, offset, 0);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
@@ -1015,7 +1015,7 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
return -EINVAL;
bindex = offset >> 3;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
/* Sanity check, this shouldn't happen */
if (gpio->cf_copro_bankmap[bindex] == 0xff) {
@@ -1036,7 +1036,7 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
if (bit)
*bit = GPIO_OFFSET(offset);
bail:
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
EXPORT_SYMBOL_GPL(aspeed_gpio_copro_grab_gpio);
@@ -1060,7 +1060,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
return -EINVAL;
bindex = offset >> 3;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
/* Sanity check, this shouldn't happen */
if (gpio->cf_copro_bankmap[bindex] == 0) {
@@ -1074,7 +1074,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
aspeed_gpio_change_cmd_source(gpio, bank, bindex,
GPIO_CMDSRC_ARM);
bail:
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
EXPORT_SYMBOL_GPL(aspeed_gpio_copro_release_gpio);
@@ -1148,7 +1148,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
if (IS_ERR(gpio->base))
return PTR_ERR(gpio->base);
- spin_lock_init(&gpio->lock);
+ raw_spin_lock_init(&gpio->lock);
gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node);
if (!gpio_id)
--
2.34.1
From: Lino Sanfilippo <[email protected]>
commit eabad7ba2c752392ae50f24a795093fb115b686d upstream.
Some SPI controller drivers unregister the controller in the shutdown
handler (e.g. BCM2835). If such a controller is used with a TPM 2 slave
chip->ops may be accessed when it is already NULL:
At system shutdown the pre-shutdown handler tpm_class_shutdown() shuts down
TPM 2 and sets chip->ops to NULL. Then at SPI controller unregistration
tpm_tis_spi_remove() is called and eventually calls tpm_del_char_device()
which tries to shut down TPM 2 again. Thereby it accesses chip->ops again:
(tpm_del_char_device calls tpm_chip_start which calls tpm_clk_enable which
calls chip->ops->clk_enable).
Avoid the NULL pointer access by testing if chip->ops is valid and skipping
the TPM 2 shutdown procedure in case it is NULL.
Cc: [email protected]
Signed-off-by: Lino Sanfilippo <[email protected]>
Fixes: 39d0099f9439 ("powerpc/pseries: Add shutdown() to vio_driver and vio_bus")
Reviewed-by: Stefan Berger <[email protected]>
Tested-by: Stefan Berger <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm-chip.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -474,13 +474,21 @@ static void tpm_del_char_device(struct t
/* Make the driver uncallable. */
down_write(&chip->ops_sem);
- if (chip->flags & TPM_CHIP_FLAG_TPM2) {
- if (!tpm_chip_start(chip)) {
- tpm2_shutdown(chip, TPM2_SU_CLEAR);
- tpm_chip_stop(chip);
+
+ /*
+ * Check if chip->ops is still valid: In case that the controller
+ * drivers shutdown handler unregisters the controller in its
+ * shutdown handler we are called twice and chip->ops to NULL.
+ */
+ if (chip->ops) {
+ if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+ if (!tpm_chip_start(chip)) {
+ tpm2_shutdown(chip, TPM2_SU_CLEAR);
+ tpm_chip_stop(chip);
+ }
}
+ chip->ops = NULL;
}
- chip->ops = NULL;
up_write(&chip->ops_sem);
}
From: Florian Fainelli <[email protected]>
[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ]
On systems with large numbers of MDIO bus/muxes the message indicating
that a given MDIO bus has been successfully probed is repeated for as
many buses we have, which can eat up substantial boot time for no
reason, demote to a debug print.
Reported-by: Maxime Bizon <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/mdio_bus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 6865d9319197f..8dc6e6269c65e 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -591,7 +591,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
mdiobus_setup_mdiodev_from_board_info(bus, mdiobus_create_device);
bus->state = MDIOBUS_REGISTERED;
- pr_info("%s: probed\n", bus->name);
+ dev_dbg(&bus->dev, "probed\n");
return 0;
error:
--
2.34.1
From: Suresh Kumar <[email protected]>
[ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ]
Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.
+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++
This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.
Signed-off-by: Suresh Kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 77dc79a7f5748..d779fed900ffa 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1096,9 +1096,6 @@ static bool bond_should_notify_peers(struct bonding *bond)
slave = rcu_dereference(bond->curr_active_slave);
rcu_read_unlock();
- netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
- slave ? slave->dev->name : "NULL");
-
if (!slave || !bond->send_peer_notif ||
bond->send_peer_notif %
max(1, bond->params.peer_notif_delay) != 0 ||
@@ -1106,6 +1103,9 @@ static bool bond_should_notify_peers(struct bonding *bond)
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
return false;
+ netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
+ slave ? slave->dev->name : "NULL");
+
return true;
}
--
2.34.1
From: Patrick Williams <[email protected]>
commit 84cc69589700b90a4c8d27b481a51fce8cca6051 upstream.
When using the tpm_tis-spi driver on a system missing the physical TPM,
a null pointer exception was observed.
[ 0.938677] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 0.939020] pgd = 10c753cb
[ 0.939237] [00000004] *pgd=00000000
[ 0.939808] Internal error: Oops: 5 [#1] SMP ARM
[ 0.940157] CPU: 0 PID: 48 Comm: kworker/u4:1 Not tainted 5.15.10-dd1e40c #1
[ 0.940364] Hardware name: Generic DT based system
[ 0.940601] Workqueue: events_unbound async_run_entry_fn
[ 0.941048] PC is at tpm_tis_remove+0x28/0xb4
[ 0.941196] LR is at tpm_tis_core_init+0x170/0x6ac
This is due to an attempt in 'tpm_tis_remove' to use the drvdata, which
was not initialized in 'tpm_tis_core_init' prior to the first error.
Move the initialization of drvdata earlier so 'tpm_tis_remove' has
access to it.
Signed-off-by: Patrick Williams <[email protected]>
Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries")
Cc: [email protected]
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -950,6 +950,8 @@ int tpm_tis_core_init(struct device *dev
priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
priv->phy_ops = phy_ops;
+ dev_set_drvdata(&chip->dev, priv);
+
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
if (rc < 0)
return rc;
@@ -962,8 +964,6 @@ int tpm_tis_core_init(struct device *dev
priv->timeout_max = TIS_TIMEOUT_MAX_ATML;
}
- dev_set_drvdata(&chip->dev, priv);
-
if (is_bsw()) {
priv->ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR,
ILB_REMAP_SIZE);
From: Daniel Borkmann <[email protected]>
commit d400a6cf1c8a57cdf10f35220ead3284320d85ff upstream.
Similar as with other pointer types where we use ldimm64, clear the register
content to zero first, and then populate the PTR_TO_FUNC type and subprogno
number. Currently this is not done, and leads to reuse of stale register
tracking data.
Given for special ldimm64 cases we always clear the register offset, make it
common for all cases, so it won't be forgotten in future.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/verifier.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -9199,9 +9199,13 @@ static int check_ld_imm(struct bpf_verif
return 0;
}
- if (insn->src_reg == BPF_PSEUDO_BTF_ID) {
- mark_reg_known_zero(env, regs, insn->dst_reg);
+ /* All special src_reg cases are listed below. From this point onwards
+ * we either succeed and assign a corresponding dst_reg->type after
+ * zeroing the offset, or fail and reject the program.
+ */
+ mark_reg_known_zero(env, regs, insn->dst_reg);
+ if (insn->src_reg == BPF_PSEUDO_BTF_ID) {
dst_reg->type = aux->btf_var.reg_type;
switch (dst_reg->type) {
case PTR_TO_MEM:
@@ -9238,7 +9242,6 @@ static int check_ld_imm(struct bpf_verif
}
map = env->used_maps[aux->map_index];
- mark_reg_known_zero(env, regs, insn->dst_reg);
dst_reg->map_ptr = map;
if (insn->src_reg == BPF_PSEUDO_MAP_VALUE ||
From: Miaoqian Lin <[email protected]>
commit d24846a4246b6e61ecbd036880a4adf61681d241 upstream.
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/parisc/pdc_stable.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -979,8 +979,10 @@ pdcs_register_pathentries(void)
entry->kobj.kset = paths_kset;
err = kobject_init_and_add(&entry->kobj, &ktype_pdcspath, NULL,
"%s", entry->name);
- if (err)
+ if (err) {
+ kobject_put(&entry->kobj);
return err;
+ }
/* kobject is now registered */
write_lock(&entry->rw_lock);
From: Zack Rusin <[email protected]>
commit 50ca8cc7c0fdd9ab16b8b66ffb301fface101fac upstream.
Before the driver had screen targets support we had to disable explicit
bringup of its infrastructure because it was breaking screen objects
support.
Since the implementation of screen targets landed there hasn't been a
reason to explicitly disable it and the options were never used.
Remove of all that unused code.
Signed-off-by: Zack Rusin <[email protected]>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Reviewed-by: Martin Krastev <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 11343099d5ae6c7411da1425b6b162c89fb5bf10)
Signed-off-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 3 ---
drivers/gpu/drm/vmwgfx/vmwgfx_mob.c | 12 +++---------
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 4 ++--
3 files changed, 5 insertions(+), 14 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -59,11 +59,8 @@
#define VMWGFX_DRIVER_MINOR 19
#define VMWGFX_DRIVER_PATCHLEVEL 0
#define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
-#define VMWGFX_MAX_RELOCATIONS 2048
-#define VMWGFX_MAX_VALIDATIONS 2048
#define VMWGFX_MAX_DISPLAYS 16
#define VMWGFX_CMD_BOUNCE_INIT_SIZE 32768
-#define VMWGFX_ENABLE_SCREEN_TARGET_OTABLE 1
#define VMWGFX_PCI_ID_SVGA2 0x0405
#define VMWGFX_PCI_ID_SVGA3 0x0406
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
/**************************************************************************
*
- * Copyright 2012-2015 VMware, Inc., Palo Alto, CA., USA
+ * Copyright 2012-2021 VMware, Inc., Palo Alto, CA., USA
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
@@ -29,12 +29,6 @@
#include "vmwgfx_drv.h"
-/*
- * If we set up the screen target otable, screen objects stop working.
- */
-
-#define VMW_OTABLE_SETUP_SUB ((VMWGFX_ENABLE_SCREEN_TARGET_OTABLE ? 0 : 1))
-
#ifdef CONFIG_64BIT
#define VMW_PPN_SIZE 8
#define VMW_MOBFMT_PTDEPTH_0 SVGA3D_MOBFMT_PT64_0
@@ -75,7 +69,7 @@ static const struct vmw_otable pre_dx_ta
{VMWGFX_NUM_GB_CONTEXT * sizeof(SVGAOTableContextEntry), NULL, true},
{VMWGFX_NUM_GB_SHADER * sizeof(SVGAOTableShaderEntry), NULL, true},
{VMWGFX_NUM_GB_SCREEN_TARGET * sizeof(SVGAOTableScreenTargetEntry),
- NULL, VMWGFX_ENABLE_SCREEN_TARGET_OTABLE}
+ NULL, true}
};
static const struct vmw_otable dx_tables[] = {
@@ -84,7 +78,7 @@ static const struct vmw_otable dx_tables
{VMWGFX_NUM_GB_CONTEXT * sizeof(SVGAOTableContextEntry), NULL, true},
{VMWGFX_NUM_GB_SHADER * sizeof(SVGAOTableShaderEntry), NULL, true},
{VMWGFX_NUM_GB_SCREEN_TARGET * sizeof(SVGAOTableScreenTargetEntry),
- NULL, VMWGFX_ENABLE_SCREEN_TARGET_OTABLE},
+ NULL, true},
{VMWGFX_NUM_DXCONTEXT * sizeof(SVGAOTableDXContextEntry), NULL, true},
};
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
@@ -1872,8 +1872,8 @@ int vmw_kms_stdu_init_display(struct vmw
int i, ret;
- /* Do nothing if Screen Target support is turned off */
- if (!VMWGFX_ENABLE_SCREEN_TARGET_OTABLE || !dev_priv->has_mob)
+ /* Do nothing if there's no support for MOBs */
+ if (!dev_priv->has_mob)
return -ENOSYS;
if (!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS))
From: Russell King <[email protected]>
commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream.
Commit 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module
memory") restricts BPF JIT program allocation to a 128MB region to ensure
BPF programs are still in branching range of each other. However this
restriction should not apply to the aarch64 JIT, since BPF_JMP | BPF_CALL
are implemented as a 64-bit move into a register and then a BLR instruction -
which has the effect of being able to call anything without proximity
limitation.
The practical reason to relax this restriction on JIT memory is that 128MB of
JIT memory can be quickly exhausted, especially where PAGE_SIZE is 64KB - one
page is needed per program. In cases where seccomp filters are applied to
multiple VMs on VM launch - such filters are classic BPF but converted to
BPF - this can severely limit the number of VMs that can be launched. In a
world where we support BPF JIT always on, turning off the JIT isn't always an
option either.
Fixes: 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory")
Suggested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/extable.h | 9 ---------
arch/arm64/include/asm/memory.h | 5 +----
arch/arm64/kernel/traps.c | 2 +-
arch/arm64/mm/ptdump.c | 2 --
arch/arm64/net/bpf_jit_comp.c | 7 ++-----
5 files changed, 4 insertions(+), 21 deletions(-)
--- a/arch/arm64/include/asm/extable.h
+++ b/arch/arm64/include/asm/extable.h
@@ -22,15 +22,6 @@ struct exception_table_entry
#define ARCH_HAS_RELATIVE_EXTABLE
-static inline bool in_bpf_jit(struct pt_regs *regs)
-{
- if (!IS_ENABLED(CONFIG_BPF_JIT))
- return false;
-
- return regs->pc >= BPF_JIT_REGION_START &&
- regs->pc < BPF_JIT_REGION_END;
-}
-
#ifdef CONFIG_BPF_JIT
int arm64_bpf_fixup_exception(const struct exception_table_entry *ex,
struct pt_regs *regs);
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -44,11 +44,8 @@
#define _PAGE_OFFSET(va) (-(UL(1) << (va)))
#define PAGE_OFFSET (_PAGE_OFFSET(VA_BITS))
#define KIMAGE_VADDR (MODULES_END)
-#define BPF_JIT_REGION_START (_PAGE_END(VA_BITS_MIN))
-#define BPF_JIT_REGION_SIZE (SZ_128M)
-#define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE)
#define MODULES_END (MODULES_VADDR + MODULES_VSIZE)
-#define MODULES_VADDR (BPF_JIT_REGION_END)
+#define MODULES_VADDR (_PAGE_END(VA_BITS_MIN))
#define MODULES_VSIZE (SZ_128M)
#define VMEMMAP_START (-(UL(1) << (VA_BITS - VMEMMAP_SHIFT)))
#define VMEMMAP_END (VMEMMAP_START + VMEMMAP_SIZE)
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -988,7 +988,7 @@ static struct break_hook bug_break_hook
static int reserved_fault_handler(struct pt_regs *regs, unsigned int esr)
{
pr_err("%s generated an invalid instruction at %pS!\n",
- in_bpf_jit(regs) ? "BPF JIT" : "Kernel text patching",
+ "Kernel text patching",
(void *)instruction_pointer(regs));
/* We cannot handle this */
--- a/arch/arm64/mm/ptdump.c
+++ b/arch/arm64/mm/ptdump.c
@@ -41,8 +41,6 @@ static struct addr_marker address_marker
{ 0 /* KASAN_SHADOW_START */, "Kasan shadow start" },
{ KASAN_SHADOW_END, "Kasan shadow end" },
#endif
- { BPF_JIT_REGION_START, "BPF start" },
- { BPF_JIT_REGION_END, "BPF end" },
{ MODULES_VADDR, "Modules start" },
{ MODULES_END, "Modules end" },
{ VMALLOC_START, "vmalloc() area" },
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1138,15 +1138,12 @@ out:
u64 bpf_jit_alloc_exec_limit(void)
{
- return BPF_JIT_REGION_SIZE;
+ return VMALLOC_END - VMALLOC_START;
}
void *bpf_jit_alloc_exec(unsigned long size)
{
- return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,
- BPF_JIT_REGION_END, GFP_KERNEL,
- PAGE_KERNEL, 0, NUMA_NO_NODE,
- __builtin_return_address(0));
+ return vmalloc(size);
}
void bpf_jit_free_exec(void *addr)
From: Robert Hancock <[email protected]>
commit 49a8f2bc8d88702783c7e163ec84374e9a022f71 upstream.
The call to of_clk_add_hw_provider was not undone on remove or on probe
failure, which could cause an oops on a subsequent attempt to retrieve
clocks for the removed device. Switch to the devm version of the
function to avoid this issue.
Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/clk-si5341.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/clk-si5341.c
+++ b/drivers/clk/clk-si5341.c
@@ -1740,7 +1740,7 @@ static int si5341_probe(struct i2c_clien
clk_prepare(data->clk[i].hw.clk);
}
- err = of_clk_add_hw_provider(client->dev.of_node, of_clk_si5341_get,
+ err = devm_of_clk_add_hw_provider(&client->dev, of_clk_si5341_get,
data);
if (err) {
dev_err(&client->dev, "unable to add clk provider\n");
From: Johannes Berg <[email protected]>
[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ]
If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.
Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649
Suggested-by: Emmanuel Grumbach <[email protected]>
Reported-by: Maximilian Ernestus <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/intel/iwlwifi/mvm/mac80211.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 7e5ad943b20cb..750217393f480 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1687,6 +1687,7 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
struct iwl_mvm_mc_iter_data iter_data = {
.mvm = mvm,
};
+ int ret;
lockdep_assert_held(&mvm->mutex);
@@ -1696,6 +1697,22 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
ieee80211_iterate_active_interfaces_atomic(
mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
iwl_mvm_mc_iface_iterator, &iter_data);
+
+ /*
+ * Send a (synchronous) ech command so that we wait for the
+ * multiple asynchronous MCAST_FILTER_CMD commands sent by
+ * the interface iterator. Otherwise, we might get here over
+ * and over again (by userspace just sending a lot of these)
+ * and the CPU can send them faster than the firmware can
+ * process them.
+ * Note that the CPU is still faster - but with this we'll
+ * actually send fewer commands overall because the CPU will
+ * not schedule the work in mac80211 as frequently if it's
+ * still running when rescheduled (possibly multiple times).
+ */
+ ret = iwl_mvm_send_cmd_pdu(mvm, ECHO_CMD, 0, 0, NULL);
+ if (ret)
+ IWL_ERR(mvm, "Failed to synchronize multicast groups update\n");
}
static u64 iwl_mvm_prepare_multicast(struct ieee80211_hw *hw,
--
2.34.1
From: Dan Carpenter <[email protected]>
commit 0ea275df84c389e910a3575a9233075118c173ee upstream.
If kstrtoint() fails then "lfs_num" is uninitialized and the warning
doesn't make any sense. Just delete it.
Fixes: 8ec8015a3168 ("crypto: octeontx2 - add support to process the crypto request")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
@@ -494,12 +494,11 @@ static ssize_t kvf_limits_store(struct d
{
struct otx2_cptpf_dev *cptpf = dev_get_drvdata(dev);
int lfs_num;
+ int ret;
- if (kstrtoint(buf, 0, &lfs_num)) {
- dev_err(dev, "lfs count %d must be in range [1 - %d]\n",
- lfs_num, num_online_cpus());
- return -EINVAL;
- }
+ ret = kstrtoint(buf, 0, &lfs_num);
+ if (ret)
+ return ret;
if (lfs_num < 1 || lfs_num > num_online_cpus()) {
dev_err(dev, "lfs count %d must be in range [1 - %d]\n",
lfs_num, num_online_cpus());
From: Ye Bin <[email protected]>
commit 8a7518931baa8ea023700987f3db31cb0a80610b upstream.
We do test with inject error fault base on v4.19, after test some time we found
sync /dev/sda always failed.
[root@localhost] sync /dev/sda
sync: error syncing '/dev/sda': Input/output error
scsi log as follows:
[19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b
[19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0
[19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0)
[19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes
[19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done.
[19069.812564] print_req_error: I/O error, dev sda, sector 0
ftrace log as follows:
rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep]
rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep]
kworker/7:1H-250 [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H]
<idle>-0 [007] ..s. 19654.923562: block_rq_complete: 8,0 FF () 18446744073709551615 + 0 [0]
<idle>-0 [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5]
As 8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq'
reference count isn't zero. If flush request once failed and record error code
in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync
will always failed.
To address this issue reset 'fq->rq_status' after return error code to upper layer.
Fixes: 8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()")
Signed-off-by: Ye Bin <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-flush.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -235,8 +235,10 @@ static void flush_end_io(struct request
* avoiding use-after-free.
*/
WRITE_ONCE(flush_rq->state, MQ_RQ_IDLE);
- if (fq->rq_status != BLK_STS_OK)
+ if (fq->rq_status != BLK_STS_OK) {
error = fq->rq_status;
+ fq->rq_status = BLK_STS_OK;
+ }
if (!q->elevator) {
flush_rq->tag = BLK_MQ_NO_TAG;
From: Heiko Carstens <[email protected]>
[ Upstream commit e5992f373c6eed6d09e5858e9623df1259b3ce30 ]
Commit 32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.
Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.
Reported-by: Alexander Egorenkov <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/ftrace/test.d/kprobe/profile.tc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
index 98166fa3eb91c..34fb89b0c61fa 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
@@ -1,6 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
-# description: Kprobe dynamic event - adding and removing
+# description: Kprobe profile
# requires: kprobe_events
! grep -q 'myevent' kprobe_profile
--
2.34.1
From: Maxime Ripard <[email protected]>
commit a16c66401fd831f70a02d33e9bcaac585637c29f upstream.
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
In VC4, a number of users of that pointers have crept in over the years,
the first one being whether or not the downstream controller of the
pixelvalve is our writeback controller.
Fortunately for us, Since commit 39fcb2808376 ("drm/vc4: txp: Turn the
TXP into a CRTC of its own") this is no longer something that can change
from one commit to the other and is hardcoded.
Let's set this flag in struct vc4_crtc if we happen to be the TXP, and
drop the flag from our private state structure.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block")
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 3 +--
drivers/gpu/drm/vc4/vc4_drv.h | 6 +++++-
drivers/gpu/drm/vc4/vc4_hvs.c | 7 +++----
drivers/gpu/drm/vc4/vc4_kms.c | 3 ++-
drivers/gpu/drm/vc4/vc4_txp.c | 3 +--
5 files changed, 12 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -715,7 +715,7 @@ static void vc4_crtc_handle_page_flip(st
spin_lock_irqsave(&dev->event_lock, flags);
if (vc4_crtc->event &&
(vc4_state->mm.start == HVS_READ(SCALER_DISPLACTX(chan)) ||
- vc4_state->feed_txp)) {
+ vc4_crtc->feeds_txp)) {
drm_crtc_send_vblank_event(crtc, vc4_crtc->event);
vc4_crtc->event = NULL;
drm_crtc_vblank_put(crtc);
@@ -893,7 +893,6 @@ struct drm_crtc_state *vc4_crtc_duplicat
return NULL;
old_vc4_state = to_vc4_crtc_state(crtc->state);
- vc4_state->feed_txp = old_vc4_state->feed_txp;
vc4_state->margins = old_vc4_state->margins;
vc4_state->assigned_channel = old_vc4_state->assigned_channel;
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -495,6 +495,11 @@ struct vc4_crtc {
struct drm_pending_vblank_event *event;
struct debugfs_regset32 regset;
+
+ /**
+ * @feeds_txp: True if the CRTC feeds our writeback controller.
+ */
+ bool feeds_txp;
};
static inline struct vc4_crtc *
@@ -521,7 +526,6 @@ struct vc4_crtc_state {
struct drm_crtc_state base;
/* Dlist area for this CRTC configuration. */
struct drm_mm_node mm;
- bool feed_txp;
bool txp_armed;
unsigned int assigned_channel;
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -375,7 +375,7 @@ static void vc4_hvs_update_dlist(struct
spin_lock_irqsave(&dev->event_lock, flags);
- if (!vc4_state->feed_txp || vc4_state->txp_armed) {
+ if (!vc4_crtc->feeds_txp || vc4_state->txp_armed) {
vc4_crtc->event = crtc->state->event;
crtc->state->event = NULL;
}
@@ -395,10 +395,9 @@ void vc4_hvs_atomic_enable(struct drm_cr
{
struct drm_device *dev = crtc->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
- struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
- struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(new_crtc_state);
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
- bool oneshot = vc4_state->feed_txp;
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ bool oneshot = vc4_crtc->feeds_txp;
vc4_hvs_update_dlist(crtc);
vc4_hvs_init_channel(vc4, crtc, mode, oneshot);
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -233,6 +233,7 @@ static void vc4_hvs_pv_muxing_commit(str
unsigned int i;
for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state);
u32 dispctrl;
u32 dsp3_mux;
@@ -253,7 +254,7 @@ static void vc4_hvs_pv_muxing_commit(str
* TXP IP, and we need to disable the FIFO2 -> pixelvalve1
* route.
*/
- if (vc4_state->feed_txp)
+ if (vc4_crtc->feeds_txp)
dsp3_mux = VC4_SET_FIELD(3, SCALER_DISPCTRL_DSP3_MUX);
else
dsp3_mux = VC4_SET_FIELD(2, SCALER_DISPCTRL_DSP3_MUX);
--- a/drivers/gpu/drm/vc4/vc4_txp.c
+++ b/drivers/gpu/drm/vc4/vc4_txp.c
@@ -391,7 +391,6 @@ static int vc4_txp_atomic_check(struct d
{
struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state,
crtc);
- struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state);
int ret;
ret = vc4_hvs_atomic_check(crtc, state);
@@ -399,7 +398,6 @@ static int vc4_txp_atomic_check(struct d
return ret;
crtc_state->no_vblank = true;
- vc4_state->feed_txp = true;
return 0;
}
@@ -482,6 +480,7 @@ static int vc4_txp_bind(struct device *d
vc4_crtc->pdev = pdev;
vc4_crtc->data = &vc4_txp_crtc_data;
+ vc4_crtc->feeds_txp = true;
txp->pdev = pdev;
From: Laurent Pinchart <[email protected]>
[ Upstream commit f0ce591dc9a97067c6e783a2eaccd22c5476144d ]
When the CMM is enabled, an offset of 25 pixels must be subtracted from
the HDS (horizontal display start) and HDE (horizontal display end)
registers. Fix the timings calculation, and take this into account in
the mode validation.
This fixes a visible horizontal offset in the image with VGA monitors.
HDMI monitors seem to be generally more tolerant to incorrect timings,
but may be affected too.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index ea7e39d035457..ee7e375ee6724 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -215,6 +215,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
struct rcar_du_device *rcdu = rcrtc->dev;
unsigned long mode_clock = mode->clock * 1000;
+ unsigned int hdse_offset;
u32 dsmr;
u32 escr;
@@ -298,10 +299,15 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
| DSMR_DIPM_DISP | DSMR_CSPM;
rcar_du_crtc_write(rcrtc, DSMR, dsmr);
+ hdse_offset = 19;
+ if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2))
+ hdse_offset += 25;
+
/* Display timings */
- rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - 19);
+ rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start -
+ hdse_offset);
rcar_du_crtc_write(rcrtc, HDER, mode->htotal - mode->hsync_start +
- mode->hdisplay - 19);
+ mode->hdisplay - hdse_offset);
rcar_du_crtc_write(rcrtc, HSWR, mode->hsync_end -
mode->hsync_start - 1);
rcar_du_crtc_write(rcrtc, HCR, mode->htotal - 1);
@@ -836,6 +842,7 @@ rcar_du_crtc_mode_valid(struct drm_crtc *crtc,
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
struct rcar_du_device *rcdu = rcrtc->dev;
bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
+ unsigned int min_sync_porch;
unsigned int vbp;
if (interlaced && !rcar_du_has(rcdu, RCAR_DU_FEATURE_INTERLACED))
@@ -843,9 +850,14 @@ rcar_du_crtc_mode_valid(struct drm_crtc *crtc,
/*
* The hardware requires a minimum combined horizontal sync and back
- * porch of 20 pixels and a minimum vertical back porch of 3 lines.
+ * porch of 20 pixels (when CMM isn't used) or 45 pixels (when CMM is
+ * used), and a minimum vertical back porch of 3 lines.
*/
- if (mode->htotal - mode->hsync_start < 20)
+ min_sync_porch = 20;
+ if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2))
+ min_sync_porch += 25;
+
+ if (mode->htotal - mode->hsync_start < min_sync_porch)
return MODE_HBLANK_NARROW;
vbp = (mode->vtotal - mode->vsync_end) / (interlaced ? 2 : 1);
--
2.34.1
From: Julia Lawall <[email protected]>
[ Upstream commit a1d2b210ffa52d60acabbf7b6af3ef7e1e69cda0 ]
for_each_node_by_type performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_node_by_type(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/btext.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 803c2a45b22ac..1cffb5e7c38d6 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -241,8 +241,10 @@ int __init btext_find_display(int allow_nonstdout)
rc = btext_initialize(np);
printk("result: %d\n", rc);
}
- if (rc == 0)
+ if (rc == 0) {
+ of_node_put(np);
break;
+ }
}
return rc;
}
--
2.34.1
From: Adam Ward <[email protected]>
[ Upstream commit 24f0853228f3b98f1ef08d5824376c69bb8124d2 ]
Prevent changing current limit when enabled as a precaution against
possibile instability due to tight integration with switching cycle
Signed-off-by: Adam Ward <[email protected]>
Link: https://lore.kernel.org/r/52ee682476004a1736c1e0293358987319c1c415.1638223185.git.Adam.Ward.opensource@diasemi.com
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/da9121-regulator.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c
index e669250902580..0a4fd449c27d1 100644
--- a/drivers/regulator/da9121-regulator.c
+++ b/drivers/regulator/da9121-regulator.c
@@ -253,6 +253,11 @@ static int da9121_set_current_limit(struct regulator_dev *rdev,
goto error;
}
+ if (rdev->desc->ops->is_enabled(rdev)) {
+ ret = -EBUSY;
+ goto error;
+ }
+
ret = da9121_ceiling_selector(rdev, min_ua, max_ua, &sel);
if (ret < 0)
goto error;
--
2.34.1
From: Russell King (Oracle) <[email protected]>
[ Upstream commit f20f94f7f52c4685c81754f489ffcc72186e8bdb ]
The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.
The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.
This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.
Hence, let's reorder these two modes to prefer copper.
Tested-by: Tom Lendacky <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reported-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/phy-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 2870c33b8975d..271fc01f7f7fd 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -162,11 +162,11 @@ static const struct phy_setting settings[] = {
PHY_SETTING( 2500, FULL, 2500baseT_Full ),
PHY_SETTING( 2500, FULL, 2500baseX_Full ),
/* 1G */
- PHY_SETTING( 1000, FULL, 1000baseKX_Full ),
PHY_SETTING( 1000, FULL, 1000baseT_Full ),
PHY_SETTING( 1000, HALF, 1000baseT_Half ),
PHY_SETTING( 1000, FULL, 1000baseT1_Full ),
PHY_SETTING( 1000, FULL, 1000baseX_Full ),
+ PHY_SETTING( 1000, FULL, 1000baseKX_Full ),
/* 100M */
PHY_SETTING( 100, FULL, 100baseT_Full ),
PHY_SETTING( 100, FULL, 100baseT1_Full ),
--
2.34.1
From: Maxime Ripard <[email protected]>
commit 0c250c150c74a90db298bf2a8bcd0a1dabed2e2f upstream.
In some situation, we can end up being stuck on a non-blocking that went
through properly.
The situation that seems to trigger it reliably is to first start a
non-blocking commit, and then right after, and before we had any vblank
interrupt), start a blocking commit.
This will lead to the first commit workqueue to be scheduled, setup the
display, while the second commit is waiting for the first one to be
completed.
The vblank interrupt will then be raised, vc4_crtc_handle_vblank() will
run and will compare the active dlist in the HVS channel to the one
associated with the crtc->state.
However, at that point, the second commit is waiting using
drm_atomic_helper_wait_for_dependencies that occurs after
drm_atomic_helper_swap_state has been called, so crtc->state points to
the second commit state. vc4_crtc_handle_vblank() will compare the two
dlist addresses and since they don't match will ignore the interrupt.
The vblank event will never be reported, and the first and second commit
will wait for the first commit completion until they timeout.
The underlying reason is that it was never safe to do so. Indeed,
accessing the ->state pointer access synchronization is based on
ownership guarantees that can only occur within the functions and hooks
defined as part of the KMS framework, and obviously the irq handler
isn't one of them. The rework to move to generic helpers only uncovered
the underlying issue.
However, since the code path between
drm_atomic_helper_wait_for_dependencies() and
drm_atomic_helper_wait_for_vblanks() is serialised and we can't get two
commits in that path at the same time, we can work around this issue by
setting a variable associated to struct drm_crtc to the dlist we expect,
and then using it from the vc4_crtc_handle_vblank() function.
Since that state is shared with the modesetting path, we also need to
introduce a spinlock to protect the code shared between the interrupt
handler and the modesetting path, protecting only our new variable for
now.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Fixes: 56d1fe0979dc ("drm/vc4: Make pageflip completion handling more robust.")
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 5 ++++-
drivers/gpu/drm/vc4/vc4_drv.h | 14 ++++++++++++++
drivers/gpu/drm/vc4/vc4_hvs.c | 7 +++++--
3 files changed, 23 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -713,8 +713,9 @@ static void vc4_crtc_handle_page_flip(st
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
+ spin_lock(&vc4_crtc->irq_lock);
if (vc4_crtc->event &&
- (vc4_state->mm.start == HVS_READ(SCALER_DISPLACTX(chan)) ||
+ (vc4_crtc->current_dlist == HVS_READ(SCALER_DISPLACTX(chan)) ||
vc4_crtc->feeds_txp)) {
drm_crtc_send_vblank_event(crtc, vc4_crtc->event);
vc4_crtc->event = NULL;
@@ -728,6 +729,7 @@ static void vc4_crtc_handle_page_flip(st
*/
vc4_hvs_unmask_underrun(dev, chan);
}
+ spin_unlock(&vc4_crtc->irq_lock);
spin_unlock_irqrestore(&dev->event_lock, flags);
}
@@ -1127,6 +1129,7 @@ int vc4_crtc_init(struct drm_device *drm
return PTR_ERR(primary_plane);
}
+ spin_lock_init(&vc4_crtc->irq_lock);
drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL,
crtc_funcs, NULL);
drm_crtc_helper_add(crtc, crtc_helper_funcs);
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -500,6 +500,20 @@ struct vc4_crtc {
* @feeds_txp: True if the CRTC feeds our writeback controller.
*/
bool feeds_txp;
+
+ /**
+ * @irq_lock: Spinlock protecting the resources shared between
+ * the atomic code and our vblank handler.
+ */
+ spinlock_t irq_lock;
+
+ /**
+ * @current_dlist: Start offset of the display list currently
+ * set in the HVS for that CRTC. Protected by @irq_lock, and
+ * copied in vc4_hvs_update_dlist() for the CRTC interrupt
+ * handler to have access to that value.
+ */
+ unsigned int current_dlist;
};
static inline struct vc4_crtc *
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -365,10 +365,9 @@ static void vc4_hvs_update_dlist(struct
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+ unsigned long flags;
if (crtc->state->event) {
- unsigned long flags;
-
crtc->state->event->pipe = drm_crtc_index(crtc);
WARN_ON(drm_crtc_vblank_get(crtc) != 0);
@@ -388,6 +387,10 @@ static void vc4_hvs_update_dlist(struct
HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
vc4_state->mm.start);
}
+
+ spin_lock_irqsave(&vc4_crtc->irq_lock, flags);
+ vc4_crtc->current_dlist = vc4_state->mm.start;
+ spin_unlock_irqrestore(&vc4_crtc->irq_lock, flags);
}
void vc4_hvs_atomic_enable(struct drm_crtc *crtc,
From: Johannes Berg <[email protected]>
[ Upstream commit ab07506b0454bea606095951e19e72c282bfbb42 ]
If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.
Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 94553f272d377..2206f66f69940 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -131,6 +131,9 @@ static void iwl_dealloc_ucode(struct iwl_drv *drv)
for (i = 0; i < IWL_UCODE_TYPE_MAX; i++)
iwl_free_fw_img(drv, drv->fw.img + i);
+
+ /* clear the data for the aborted load case */
+ memset(&drv->fw, 0, sizeof(drv->fw));
}
static int iwl_alloc_fw_desc(struct iwl_drv *drv, struct fw_desc *desc,
@@ -1333,6 +1336,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
int i;
bool load_module = false;
bool usniffer_images = false;
+ bool failure = true;
fw->ucode_capa.max_probe_length = IWL_DEFAULT_MAX_PROBE_LENGTH;
fw->ucode_capa.standard_phy_calibration_size =
@@ -1602,6 +1606,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
op->name, err);
#endif
}
+ failure = false;
goto free;
try_again:
@@ -1617,6 +1622,9 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
complete(&drv->request_firmware_complete);
device_release_driver(drv->trans->dev);
free:
+ if (failure)
+ iwl_dealloc_ucode(drv);
+
if (pieces) {
for (i = 0; i < ARRAY_SIZE(pieces->img); i++)
kfree(pieces->img[i].sec);
--
2.34.1
From: Anders Roxell <[email protected]>
commit e89257e28e844f5d1d39081bb901d9f1183a7705 upstream.
Clang warns:
arch/powerpc/platforms/cell/pervasive.c:81:2: error: unannotated fall-through between switch labels
case SRR1_WAKEEE:
^
arch/powerpc/platforms/cell/pervasive.c:81:2: note: insert 'break;' to avoid fall-through
case SRR1_WAKEEE:
^
break;
1 error generated.
Clang is more pedantic than GCC, which does not warn when failing
through to a case that is just break or return. Clang's version is more
in line with the kernel's own stance in deprecated.rst. Add athe missing
break to silence the warning.
Fixes: 6e83985b0f6e ("powerpc/cbe: Do not process external or decremeter interrupts from sreset")
Reported-by: Naresh Kamboju <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/cell/pervasive.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -78,6 +78,7 @@ static int cbe_system_reset_exception(st
switch (regs->msr & SRR1_WAKEMASK) {
case SRR1_WAKEDEC:
set_dec(1);
+ break;
case SRR1_WAKEEE:
/*
* Handle these when interrupts get re-enabled and we take
From: Christophe Leroy <[email protected]>
[ Upstream commit 33dc3e3e99e626ce51f462d883b05856c6c30b1d ]
sparse warnings: (new ones prefixed by >>)
>> drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char [noderef] __user *_pu_addr @@ got char *buf @@
drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: expected char [noderef] __user *_pu_addr
drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: got char *buf
>> drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char const [noderef] __user *_gu_addr @@ got char const *buf @@
drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: expected char const [noderef] __user *_gu_addr
drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: got char const *buf
The buffer buf is a failsafe buffer in kernel space, it's not user
memory hence doesn't deserve the use of get_user() or put_user().
Access 'buf' content directly.
Link: https://lore.kernel.org/lkml/[email protected]/T/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Link: https://lore.kernel.org/r/d14ed8d71ad4372e6839ae427f91441d3ba0e94d.1637946316.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/w1/slaves/w1_ds28e04.c | 26 ++++++--------------------
1 file changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
index e4f336111edc6..6cef6e2edb892 100644
--- a/drivers/w1/slaves/w1_ds28e04.c
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -32,7 +32,7 @@ static int w1_strong_pullup = 1;
module_param_named(strong_pullup, w1_strong_pullup, int, 0);
/* enable/disable CRC checking on DS28E04-100 memory accesses */
-static char w1_enable_crccheck = 1;
+static bool w1_enable_crccheck = true;
#define W1_EEPROM_SIZE 512
#define W1_PAGE_COUNT 16
@@ -339,32 +339,18 @@ static BIN_ATTR_RW(pio, 1);
static ssize_t crccheck_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- if (put_user(w1_enable_crccheck + 0x30, buf))
- return -EFAULT;
-
- return sizeof(w1_enable_crccheck);
+ return sysfs_emit(buf, "%d\n", w1_enable_crccheck);
}
static ssize_t crccheck_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- char val;
-
- if (count != 1 || !buf)
- return -EINVAL;
+ int err = kstrtobool(buf, &w1_enable_crccheck);
- if (get_user(val, buf))
- return -EFAULT;
+ if (err)
+ return err;
- /* convert to decimal */
- val = val - 0x30;
- if (val != 0 && val != 1)
- return -EINVAL;
-
- /* set the new value */
- w1_enable_crccheck = val;
-
- return sizeof(w1_enable_crccheck);
+ return count;
}
static DEVICE_ATTR_RW(crccheck);
--
2.34.1
From: Chao Yu <[email protected]>
commit 300a842937fbcfb5a189cea9ba15374fdb0b5c6b upstream.
https://bugzilla.kernel.org/show_bug.cgi?id=204137
With below script, we will hit panic during new segment allocation:
DISK=bingo.img
MOUNT_DIR=/mnt/f2fs
dd if=/dev/zero of=$DISK bs=1M count=105
mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK
mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict"
for (( i = 0; i < 4096; i++ )); do
name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10`
mkdir $MOUNT_DIR/$name
done
umount $MOUNT_DIR
rm $DISK
---
fs/f2fs/f2fs.h | 11 +++++++++++
fs/f2fs/segment.h | 3 ++-
fs/f2fs/super.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
fs/f2fs/sysfs.c | 4 +++-
4 files changed, 60 insertions(+), 2 deletions(-)
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -1012,6 +1012,7 @@ struct f2fs_sm_info {
unsigned int segment_count; /* total # of segments */
unsigned int main_segments; /* # of segments in main area */
unsigned int reserved_segments; /* # of reserved segments */
+ unsigned int additional_reserved_segments;/* reserved segs for IO align feature */
unsigned int ovp_segments; /* # of overprovision segments */
/* a threshold to reclaim prefree segments */
@@ -2184,6 +2185,11 @@ static inline int inc_valid_block_count(
if (!__allow_reserved_blocks(sbi, inode, true))
avail_user_block_count -= F2FS_OPTION(sbi).root_reserved_blocks;
+
+ if (F2FS_IO_ALIGNED(sbi))
+ avail_user_block_count -= sbi->blocks_per_seg *
+ SM_I(sbi)->additional_reserved_segments;
+
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED))) {
if (avail_user_block_count > sbi->unusable_block_count)
avail_user_block_count -= sbi->unusable_block_count;
@@ -2430,6 +2436,11 @@ static inline int inc_valid_node_count(s
if (!__allow_reserved_blocks(sbi, inode, false))
valid_block_count += F2FS_OPTION(sbi).root_reserved_blocks;
+
+ if (F2FS_IO_ALIGNED(sbi))
+ valid_block_count += sbi->blocks_per_seg *
+ SM_I(sbi)->additional_reserved_segments;
+
user_block_count = sbi->user_block_count;
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED)))
user_block_count -= sbi->unusable_block_count;
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -537,7 +537,8 @@ static inline unsigned int free_segments
static inline unsigned int reserved_segments(struct f2fs_sb_info *sbi)
{
- return SM_I(sbi)->reserved_segments;
+ return SM_I(sbi)->reserved_segments +
+ SM_I(sbi)->additional_reserved_segments;
}
static inline unsigned int free_sections(struct f2fs_sb_info *sbi)
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -327,6 +327,46 @@ static inline void limit_reserve_root(st
F2FS_OPTION(sbi).s_resgid));
}
+static inline int adjust_reserved_segment(struct f2fs_sb_info *sbi)
+{
+ unsigned int sec_blks = sbi->blocks_per_seg * sbi->segs_per_sec;
+ unsigned int avg_vblocks;
+ unsigned int wanted_reserved_segments;
+ block_t avail_user_block_count;
+
+ if (!F2FS_IO_ALIGNED(sbi))
+ return 0;
+
+ /* average valid block count in section in worst case */
+ avg_vblocks = sec_blks / F2FS_IO_SIZE(sbi);
+
+ /*
+ * we need enough free space when migrating one section in worst case
+ */
+ wanted_reserved_segments = (F2FS_IO_SIZE(sbi) / avg_vblocks) *
+ reserved_segments(sbi);
+ wanted_reserved_segments -= reserved_segments(sbi);
+
+ avail_user_block_count = sbi->user_block_count -
+ sbi->current_reserved_blocks -
+ F2FS_OPTION(sbi).root_reserved_blocks;
+
+ if (wanted_reserved_segments * sbi->blocks_per_seg >
+ avail_user_block_count) {
+ f2fs_err(sbi, "IO align feature can't grab additional reserved segment: %u, available segments: %u",
+ wanted_reserved_segments,
+ avail_user_block_count >> sbi->log_blocks_per_seg);
+ return -ENOSPC;
+ }
+
+ SM_I(sbi)->additional_reserved_segments = wanted_reserved_segments;
+
+ f2fs_info(sbi, "IO align feature needs additional reserved segment: %u",
+ wanted_reserved_segments);
+
+ return 0;
+}
+
static inline void adjust_unusable_cap_perc(struct f2fs_sb_info *sbi)
{
if (!F2FS_OPTION(sbi).unusable_cap_perc)
@@ -4148,6 +4188,10 @@ try_onemore:
goto free_nm;
}
+ err = adjust_reserved_segment(sbi);
+ if (err)
+ goto free_nm;
+
/* For write statistics */
sbi->sectors_written_start = f2fs_get_sectors_written(sbi);
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -415,7 +415,9 @@ out:
if (a->struct_type == RESERVED_BLOCKS) {
spin_lock(&sbi->stat_lock);
if (t > (unsigned long)(sbi->user_block_count -
- F2FS_OPTION(sbi).root_reserved_blocks)) {
+ F2FS_OPTION(sbi).root_reserved_blocks -
+ sbi->blocks_per_seg *
+ SM_I(sbi)->additional_reserved_segments)) {
spin_unlock(&sbi->stat_lock);
return -EINVAL;
}
From: Tobias Waldekranz <[email protected]>
commit 6198c722019774d38018457a8bfb9ba3ed8c931e upstream.
Once an MDIO read transaction is initiated, we must read back the data
register within 16 MDC cycles after the transaction completes. Outside
of this window, reads may return corrupt data.
Therefore, disable local interrupts in the critical section, to
maximize the probability that we can satisfy this requirement.
Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/xgmac_mdio.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -52,6 +52,7 @@ struct tgec_mdio_controller {
struct mdio_fsl_priv {
struct tgec_mdio_controller __iomem *mdio_base;
bool is_little_endian;
+ bool has_a009885;
bool has_a011043;
};
@@ -187,10 +188,10 @@ static int xgmac_mdio_read(struct mii_bu
{
struct mdio_fsl_priv *priv = (struct mdio_fsl_priv *)bus->priv;
struct tgec_mdio_controller __iomem *regs = priv->mdio_base;
+ unsigned long flags;
uint16_t dev_addr;
uint32_t mdio_stat;
uint32_t mdio_ctl;
- uint16_t value;
int ret;
bool endian = priv->is_little_endian;
@@ -222,12 +223,18 @@ static int xgmac_mdio_read(struct mii_bu
return ret;
}
+ if (priv->has_a009885)
+ /* Once the operation completes, i.e. MDIO_STAT_BSY clears, we
+ * must read back the data register within 16 MDC cycles.
+ */
+ local_irq_save(flags);
+
/* Initiate the read */
xgmac_write32(mdio_ctl | MDIO_CTL_READ, ®s->mdio_ctl, endian);
ret = xgmac_wait_until_done(&bus->dev, regs, endian);
if (ret)
- return ret;
+ goto irq_restore;
/* Return all Fs if nothing was there */
if ((xgmac_read32(®s->mdio_stat, endian) & MDIO_STAT_RD_ER) &&
@@ -235,13 +242,17 @@ static int xgmac_mdio_read(struct mii_bu
dev_dbg(&bus->dev,
"Error while reading PHY%d reg at %d.%hhu\n",
phy_id, dev_addr, regnum);
- return 0xffff;
+ ret = 0xffff;
+ } else {
+ ret = xgmac_read32(®s->mdio_data, endian) & 0xffff;
+ dev_dbg(&bus->dev, "read %04x\n", ret);
}
- value = xgmac_read32(®s->mdio_data, endian) & 0xffff;
- dev_dbg(&bus->dev, "read %04x\n", value);
+irq_restore:
+ if (priv->has_a009885)
+ local_irq_restore(flags);
- return value;
+ return ret;
}
static int xgmac_mdio_probe(struct platform_device *pdev)
@@ -288,6 +299,8 @@ static int xgmac_mdio_probe(struct platf
priv->is_little_endian = device_property_read_bool(&pdev->dev,
"little-endian");
+ priv->has_a009885 = device_property_read_bool(&pdev->dev,
+ "fsl,erratum-a009885");
priv->has_a011043 = device_property_read_bool(&pdev->dev,
"fsl,erratum-a011043");
From: Alexandre Ghiti <[email protected]>
commit 2ac7069ad7647cd1d9ca5b08765a1e116e13cdc4 upstream.
This config was removed so remove all references to it.
Fixes: 76a3c92ec9e0 ("cifs: remove support for NTLM and weaker authentication algorithms")
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Steve French <[email protected]>
Acked-by: Arnd Bergmann <[email protected]> [arch/arm/configs]
Acked-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/cifs/usage.rst | 7 +++----
arch/arm/configs/cm_x300_defconfig | 1 -
arch/arm/configs/ezx_defconfig | 1 -
arch/arm/configs/imote2_defconfig | 1 -
arch/arm/configs/nhk8815_defconfig | 1 -
arch/arm/configs/pxa_defconfig | 1 -
arch/mips/configs/fuloong2e_defconfig | 1 -
arch/mips/configs/malta_qemu_32r6_defconfig | 1 -
arch/mips/configs/maltaaprp_defconfig | 1 -
arch/mips/configs/maltasmvp_defconfig | 1 -
arch/mips/configs/maltasmvp_eva_defconfig | 1 -
arch/mips/configs/maltaup_defconfig | 1 -
arch/powerpc/configs/ppc6xx_defconfig | 1 -
arch/sh/configs/titan_defconfig | 1 -
14 files changed, 3 insertions(+), 17 deletions(-)
--- a/Documentation/admin-guide/cifs/usage.rst
+++ b/Documentation/admin-guide/cifs/usage.rst
@@ -734,10 +734,9 @@ SecurityFlags Flags which control secur
using weaker password hashes is 0x37037 (lanman,
plaintext, ntlm, ntlmv2, signing allowed). Some
SecurityFlags require the corresponding menuconfig
- options to be enabled (lanman and plaintext require
- CONFIG_CIFS_WEAK_PW_HASH for example). Enabling
- plaintext authentication currently requires also
- enabling lanman authentication in the security flags
+ options to be enabled. Enabling plaintext
+ authentication currently requires also enabling
+ lanman authentication in the security flags
because the cifs module only supports sending
laintext passwords using the older lanman dialect
form of the session setup SMB. (e.g. for authentication
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -146,7 +146,6 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -314,7 +314,6 @@ CONFIG_NFSD_V3_ACL=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=m
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -288,7 +288,6 @@ CONFIG_NFSD_V3_ACL=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=m
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -127,7 +127,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -699,7 +699,6 @@ CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_DEFAULT="utf8"
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -206,7 +206,6 @@ CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG2=y
--- a/arch/mips/configs/malta_qemu_32r6_defconfig
+++ b/arch/mips/configs/malta_qemu_32r6_defconfig
@@ -165,7 +165,6 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=m
--- a/arch/mips/configs/maltaaprp_defconfig
+++ b/arch/mips/configs/maltaaprp_defconfig
@@ -166,7 +166,6 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=m
--- a/arch/mips/configs/maltasmvp_defconfig
+++ b/arch/mips/configs/maltasmvp_defconfig
@@ -167,7 +167,6 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=m
--- a/arch/mips/configs/maltasmvp_eva_defconfig
+++ b/arch/mips/configs/maltasmvp_eva_defconfig
@@ -169,7 +169,6 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=m
--- a/arch/mips/configs/maltaup_defconfig
+++ b/arch/mips/configs/maltaup_defconfig
@@ -165,7 +165,6 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=m
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1022,7 +1022,6 @@ CONFIG_NFSD=m
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -242,7 +242,6 @@ CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ASCII=m
From: Luís Henriques <[email protected]>
commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream.
When migrating to extents, the temporary inode will have it's own checksum
seed. This means that, when swapping the inodes data, the inode checksums
will be incorrect.
This can be fixed by recalculating the extents checksums again. Or simply
by copying the seed into the temporary inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357
Reported-by: Jeroen van Wolffelaar <[email protected]>
Signed-off-by: Luís Henriques <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/migrate.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -459,6 +459,17 @@ int ext4_ext_migrate(struct inode *inode
ext4_journal_stop(handle);
goto out_unlock;
}
+ /*
+ * Use the correct seed for checksum (i.e. the seed from 'inode'). This
+ * is so that the metadata blocks will have the correct checksum after
+ * the migration.
+ *
+ * Note however that, if a crash occurs during the migration process,
+ * the recovery process is broken because the tmp_inode checksums will
+ * be wrong and the orphans cleanup will fail.
+ */
+ ei = EXT4_I(inode);
+ EXT4_I(tmp_inode)->i_csum_seed = ei->i_csum_seed;
i_size_write(tmp_inode, i_size_read(inode));
/*
* Set the i_nlink to zero so it will be deleted later
@@ -502,7 +513,6 @@ int ext4_ext_migrate(struct inode *inode
goto out_tmp_inode;
}
- ei = EXT4_I(inode);
i_data = ei->i_data;
memset(&lb, 0, sizeof(lb));
From: Ben Hutchings <[email protected]>
commit d185a3466f0cd5af8f1c5c782c53bc0e6f2e7136 upstream.
The help text for GOOGLE_FIRMWARE states that it should only be
enabled when building a kernel for Google's own servers. However,
many of the drivers dependent on it are also useful on Chromebooks or
on any platform using coreboot.
Update the help text to reflect this double duty.
Fixes: d384d6f43d1e ("firmware: google memconsole: Add coreboot support")
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/google/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/firmware/google/Kconfig
+++ b/drivers/firmware/google/Kconfig
@@ -3,9 +3,9 @@ menuconfig GOOGLE_FIRMWARE
bool "Google Firmware Drivers"
default n
help
- These firmware drivers are used by Google's servers. They are
- only useful if you are working directly on one of their
- proprietary servers. If in doubt, say "N".
+ These firmware drivers are used by Google servers,
+ Chromebooks and other devices using coreboot firmware.
+ If in doubt, say "N".
if GOOGLE_FIRMWARE
From: Zhang Yi <[email protected]>
commit 5c48a7df91499e371ef725895b2e2d21a126e227 upstream.
Our syzkaller report an use-after-free issue that accessing the freed
buffer_head on the writeback page in __ext4_journalled_writepage(). The
problem is that if there was a truncate racing with the data=journalled
writeback procedure, the writeback length could become zero and
bget_one() refuse to get buffer_head's refcount, then the truncate
procedure release buffer once we drop page lock, finally, the last
ext4_walk_page_buffers() trigger the use-after-free problem.
sync truncate
ext4_sync_file()
file_write_and_wait_range()
ext4_setattr(0)
inode->i_size = 0
ext4_writepage()
len = 0
__ext4_journalled_writepage()
page_bufs = page_buffers(page)
ext4_walk_page_buffers(bget_one) <- does not get refcount
do_invalidatepage()
free_buffer_head()
ext4_walk_page_buffers(page_bufs) <- trigger use-after-free
After commit bdf96838aea6 ("ext4: fix race between truncate and
__ext4_journalled_writepage()"), we have already handled the racing
case, so the bget_one() and bput_one() are not needed. So this patch
simply remove these hunk, and recheck the i_size to make it safe.
Fixes: bdf96838aea6 ("ext4: fix race between truncate and __ext4_journalled_writepage()")
Signed-off-by: Zhang Yi <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 37 ++++++++++---------------------------
1 file changed, 10 insertions(+), 27 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1845,30 +1845,16 @@ int ext4_da_get_block_prep(struct inode
return 0;
}
-static int bget_one(handle_t *handle, struct inode *inode,
- struct buffer_head *bh)
-{
- get_bh(bh);
- return 0;
-}
-
-static int bput_one(handle_t *handle, struct inode *inode,
- struct buffer_head *bh)
-{
- put_bh(bh);
- return 0;
-}
-
static int __ext4_journalled_writepage(struct page *page,
unsigned int len)
{
struct address_space *mapping = page->mapping;
struct inode *inode = mapping->host;
- struct buffer_head *page_bufs = NULL;
handle_t *handle = NULL;
int ret = 0, err = 0;
int inline_data = ext4_has_inline_data(inode);
struct buffer_head *inode_bh = NULL;
+ loff_t size;
ClearPageChecked(page);
@@ -1878,14 +1864,6 @@ static int __ext4_journalled_writepage(s
inode_bh = ext4_journalled_write_inline_data(inode, len, page);
if (inode_bh == NULL)
goto out;
- } else {
- page_bufs = page_buffers(page);
- if (!page_bufs) {
- BUG();
- goto out;
- }
- ext4_walk_page_buffers(handle, inode, page_bufs, 0, len,
- NULL, bget_one);
}
/*
* We need to release the page lock before we start the
@@ -1906,7 +1884,8 @@ static int __ext4_journalled_writepage(s
lock_page(page);
put_page(page);
- if (page->mapping != mapping) {
+ size = i_size_read(inode);
+ if (page->mapping != mapping || page_offset(page) > size) {
/* The page got truncated from under us */
ext4_journal_stop(handle);
ret = 0;
@@ -1916,6 +1895,13 @@ static int __ext4_journalled_writepage(s
if (inline_data) {
ret = ext4_mark_inode_dirty(handle, inode);
} else {
+ struct buffer_head *page_bufs = page_buffers(page);
+
+ if (page->index == size >> PAGE_SHIFT)
+ len = size & ~PAGE_MASK;
+ else
+ len = PAGE_SIZE;
+
ret = ext4_walk_page_buffers(handle, inode, page_bufs, 0, len,
NULL, do_journal_get_write_access);
@@ -1936,9 +1922,6 @@ static int __ext4_journalled_writepage(s
out:
unlock_page(page);
out_no_pagelock:
- if (!inline_data && page_bufs)
- ext4_walk_page_buffers(NULL, inode, page_bufs, 0, len,
- NULL, bput_one);
brelse(inode_bh);
return ret;
}
From: Ye Bin <[email protected]>
commit 298b5c521746d69c07beb2757292fb5ccc1b0f85 upstream.
We got issue as follows when run syzkaller test:
[ 1901.130043] EXT4-fs error (device vda): ext4_remount:5624: comm syz-executor.5: Abort forced by user
[ 1901.130901] Aborting journal on device vda-8.
[ 1901.131437] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.16: Detected aborted journal
[ 1901.131566] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.11: Detected aborted journal
[ 1901.132586] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.18: Detected aborted journal
[ 1901.132751] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.9: Detected aborted journal
[ 1901.136149] EXT4-fs error (device vda) in ext4_reserve_inode_write:6035: Journal has aborted
[ 1901.136837] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-fuzzer: Detected aborted journal
[ 1901.136915] ==================================================================
[ 1901.138175] BUG: KASAN: null-ptr-deref in __ext4_journal_ensure_credits+0x74/0x140 [ext4]
[ 1901.138343] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.13: Detected aborted journal
[ 1901.138398] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.1: Detected aborted journal
[ 1901.138808] Read of size 8 at addr 0000000000000000 by task syz-executor.17/968
[ 1901.138817]
[ 1901.138852] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.30: Detected aborted journal
[ 1901.144779] CPU: 1 PID: 968 Comm: syz-executor.17 Not tainted 4.19.90-vhulk2111.1.0.h893.eulerosv2r10.aarch64+ #1
[ 1901.146479] Hardware name: linux,dummy-virt (DT)
[ 1901.147317] Call trace:
[ 1901.147552] dump_backtrace+0x0/0x2d8
[ 1901.147898] show_stack+0x28/0x38
[ 1901.148215] dump_stack+0xec/0x15c
[ 1901.148746] kasan_report+0x108/0x338
[ 1901.149207] __asan_load8+0x58/0xb0
[ 1901.149753] __ext4_journal_ensure_credits+0x74/0x140 [ext4]
[ 1901.150579] ext4_xattr_delete_inode+0xe4/0x700 [ext4]
[ 1901.151316] ext4_evict_inode+0x524/0xba8 [ext4]
[ 1901.151985] evict+0x1a4/0x378
[ 1901.152353] iput+0x310/0x428
[ 1901.152733] do_unlinkat+0x260/0x428
[ 1901.153056] __arm64_sys_unlinkat+0x6c/0xc0
[ 1901.153455] el0_svc_common+0xc8/0x320
[ 1901.153799] el0_svc_handler+0xf8/0x160
[ 1901.154265] el0_svc+0x10/0x218
[ 1901.154682] ==================================================================
This issue may happens like this:
Process1 Process2
ext4_evict_inode
ext4_journal_start
ext4_truncate
ext4_ind_truncate
ext4_free_branches
ext4_ind_truncate_ensure_credits
ext4_journal_ensure_credits_fn
ext4_journal_restart
handle->h_transaction = NULL;
mount -o remount,abort /mnt
-> trigger JBD abort
start_this_handle -> will return failed
ext4_xattr_delete_inode
ext4_journal_ensure_credits
ext4_journal_ensure_credits_fn
__ext4_journal_ensure_credits
jbd2_handle_buffer_credits
journal = handle->h_transaction->t_journal; ->null-ptr-deref
Now, indirect truncate process didn't handle error. To solve this issue
maybe simply add check handle is abort in '__ext4_journal_ensure_credits'
is enough, and i also think this is necessary.
Cc: [email protected]
Signed-off-by: Ye Bin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/ext4_jbd2.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -162,6 +162,8 @@ int __ext4_journal_ensure_credits(handle
{
if (!ext4_handle_valid(handle))
return 0;
+ if (is_handle_aborted(handle))
+ return -EROFS;
if (jbd2_handle_buffer_credits(handle) >= check_cred &&
handle->h_revoke_credits >= revoke_cred)
return 0;
From: Alexander Gordeev <[email protected]>
commit c2c224932fd0ee6854d6ebfc8d059c2bcad86606 upstream.
There is a race on concurrent 2KB-pgtables release paths when
both upper and lower halves of the containing parent page are
freed, one via page_table_free_rcu() + __tlb_remove_table(),
and the other via page_table_free(). The race might lead to a
corruption as result of remove of list item in page_table_free()
concurrently with __free_page() in __tlb_remove_table().
Let's assume first the lower and next the upper 2KB-pgtables are
freed from a page. Since both halves of the page are allocated
the tracking byte (bits 24-31 of the page _refcount) has value
of 0x03 initially:
CPU0 CPU1
---- ----
page_table_free_rcu() // lower half
{
// _refcount[31..24] == 0x03
...
atomic_xor_bits(&page->_refcount,
0x11U << (0 + 24));
// _refcount[31..24] <= 0x12
...
table = table | (1U << 0);
tlb_remove_table(tlb, table);
}
...
__tlb_remove_table()
{
// _refcount[31..24] == 0x12
mask = _table & 3;
// mask <= 0x01
...
page_table_free() // upper half
{
// _refcount[31..24] == 0x12
...
atomic_xor_bits(
&page->_refcount,
1U << (1 + 24));
// _refcount[31..24] <= 0x10
// mask <= 0x10
...
atomic_xor_bits(&page->_refcount,
mask << (4 + 24));
// _refcount[31..24] <= 0x00
// mask <= 0x00
...
if (mask != 0) // == false
break;
fallthrough;
...
if (mask & 3) // == false
...
else
__free_page(page); list_del(&page->lru);
^^^^^^^^^^^^^^^^^^ RACE! ^^^^^^^^^^^^^^^^^^^^^
} ...
}
The problem is page_table_free() releases the page as result of
lower nibble unset and __tlb_remove_table() observing zero too
early. With this update page_table_free() will use the similar
logic as page_table_free_rcu() + __tlb_remove_table(), and mark
the fragment as pending for removal in the upper nibble until
after the list_del().
In other words, the parent page is considered as unreferenced and
safe to release only when the lower nibble is cleared already and
unsetting a bit in upper nibble results in that nibble turned zero.
Cc: [email protected]
Suggested-by: Vlastimil Babka <[email protected]>
Reviewed-by: Gerald Schaefer <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/mm/pgalloc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -244,13 +244,15 @@ void page_table_free(struct mm_struct *m
/* Free 2K page table fragment of a 4K page */
bit = ((unsigned long) table & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t));
spin_lock_bh(&mm->context.lock);
- mask = atomic_xor_bits(&page->_refcount, 1U << (bit + 24));
+ mask = atomic_xor_bits(&page->_refcount, 0x11U << (bit + 24));
mask >>= 24;
if (mask & 3)
list_add(&page->lru, &mm->context.pgtable_list);
else
list_del(&page->lru);
spin_unlock_bh(&mm->context.lock);
+ mask = atomic_xor_bits(&page->_refcount, 0x10U << (bit + 24));
+ mask >>= 24;
if (mask != 0)
return;
} else {
From: Steven Rostedt <[email protected]>
commit 3e2a56e6f639492311e0a8533f0a7aed60816308 upstream.
Currently, the syscall trace events call trace_buffer_lock_reserve()
directly, which means that it misses out on some of the filtering
optimizations provided by the helper function
trace_event_buffer_lock_reserve(). Have the syscall trace events call that
instead, as it was missed when adding the update to use the temp buffer
when filtering.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Tom Zanussi <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Fixes: 0fc1b09ff1ff4 ("tracing: Use temp buffer when filtering events")
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_syscalls.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -323,8 +323,7 @@ static void ftrace_syscall_enter(void *d
trace_ctx = tracing_gen_ctx();
- buffer = tr->array_buffer.buffer;
- event = trace_buffer_lock_reserve(buffer,
+ event = trace_event_buffer_lock_reserve(&buffer, trace_file,
sys_data->enter_event->event.type, size, trace_ctx);
if (!event)
return;
@@ -367,8 +366,7 @@ static void ftrace_syscall_exit(void *da
trace_ctx = tracing_gen_ctx();
- buffer = tr->array_buffer.buffer;
- event = trace_buffer_lock_reserve(buffer,
+ event = trace_event_buffer_lock_reserve(&buffer, trace_file,
sys_data->exit_event->event.type, sizeof(*entry),
trace_ctx);
if (!event)
From: Ye Bin <[email protected]>
commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream.
We got issue as follows when run syzkaller:
[ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user
[ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only
[ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0'
[ 167.983601] ------------[ cut here ]------------
[ 167.984245] kernel BUG at fs/ext4/inode.c:847!
[ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123
[ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504
[ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244
[ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282
[ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000
[ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66
[ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09
[ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8
[ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001
[ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000
[ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0
[ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 168.001899] Call Trace:
[ 168.002235] <TASK>
[ 168.007167] ext4_bread+0xd/0x53
[ 168.007612] ext4_quota_write+0x20c/0x5c0
[ 168.010457] write_blk+0x100/0x220
[ 168.010944] remove_free_dqentry+0x1c6/0x440
[ 168.011525] free_dqentry.isra.0+0x565/0x830
[ 168.012133] remove_tree+0x318/0x6d0
[ 168.014744] remove_tree+0x1eb/0x6d0
[ 168.017346] remove_tree+0x1eb/0x6d0
[ 168.019969] remove_tree+0x1eb/0x6d0
[ 168.022128] qtree_release_dquot+0x291/0x340
[ 168.023297] v2_release_dquot+0xce/0x120
[ 168.023847] dquot_release+0x197/0x3e0
[ 168.024358] ext4_release_dquot+0x22a/0x2d0
[ 168.024932] dqput.part.0+0x1c9/0x900
[ 168.025430] __dquot_drop+0x120/0x190
[ 168.025942] ext4_clear_inode+0x86/0x220
[ 168.026472] ext4_evict_inode+0x9e8/0xa22
[ 168.028200] evict+0x29e/0x4f0
[ 168.028625] dispose_list+0x102/0x1f0
[ 168.029148] evict_inodes+0x2c1/0x3e0
[ 168.030188] generic_shutdown_super+0xa4/0x3b0
[ 168.030817] kill_block_super+0x95/0xd0
[ 168.031360] deactivate_locked_super+0x85/0xd0
[ 168.031977] cleanup_mnt+0x2bc/0x480
[ 168.033062] task_work_run+0xd1/0x170
[ 168.033565] do_exit+0xa4f/0x2b50
[ 168.037155] do_group_exit+0xef/0x2d0
[ 168.037666] __x64_sys_exit_group+0x3a/0x50
[ 168.038237] do_syscall_64+0x3b/0x90
[ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae
In order to reproduce this problem, the following conditions need to be met:
1. Ext4 filesystem with no journal;
2. Filesystem image with incorrect quota data;
3. Abort filesystem forced by user;
4. umount filesystem;
As in ext4_quota_write:
...
if (EXT4_SB(sb)->s_journal && !handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
...
We only check handle if NULL when filesystem has journal. There is need
check handle if NULL even when filesystem has no journal.
Signed-off-by: Ye Bin <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6470,7 +6470,7 @@ static ssize_t ext4_quota_write(struct s
struct buffer_head *bh;
handle_t *handle = journal_current_handle();
- if (EXT4_SB(sb)->s_journal && !handle) {
+ if (!handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
From: Jan Kara <[email protected]>
commit 15fc69bbbbbc8c72e5f6cc4e1be0f51283c5448e upstream.
When we hit an error when enabling quotas and setting inode flags, we do
not properly shutdown quota subsystem despite returning error from
Q_QUOTAON quotactl. This can lead to some odd situations like kernel
using quota file while it is still writeable for userspace. Make sure we
properly cleanup the quota subsystem in case of error.
Signed-off-by: Jan Kara <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6266,10 +6266,7 @@ static int ext4_quota_on(struct super_bl
lockdep_set_quota_inode(path->dentry->d_inode, I_DATA_SEM_QUOTA);
err = dquot_quota_on(sb, type, format_id, path);
- if (err) {
- lockdep_set_quota_inode(path->dentry->d_inode,
- I_DATA_SEM_NORMAL);
- } else {
+ if (!err) {
struct inode *inode = d_inode(path->dentry);
handle_t *handle;
@@ -6289,7 +6286,12 @@ static int ext4_quota_on(struct super_bl
ext4_journal_stop(handle);
unlock_inode:
inode_unlock(inode);
+ if (err)
+ dquot_quota_off(sb, type);
}
+ if (err)
+ lockdep_set_quota_inode(path->dentry->d_inode,
+ I_DATA_SEM_NORMAL);
return err;
}
From: Dmitry Osipenko <[email protected]>
commit a21115dd38c6cf396ba39aefd561e7903ca6149d upstream.
Runtime PM auto-suspension doesn't work without pm_runtime_mark_last_busy(),
add it.
Cc: <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/tegra/submit.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/tegra/submit.c
+++ b/drivers/gpu/drm/tegra/submit.c
@@ -475,8 +475,10 @@ static void release_job(struct host1x_jo
kfree(job_data->used_mappings);
kfree(job_data);
- if (pm_runtime_enabled(client->base.dev))
+ if (pm_runtime_enabled(client->base.dev)) {
+ pm_runtime_mark_last_busy(client->base.dev);
pm_runtime_put_autosuspend(client->base.dev);
+ }
}
int tegra_drm_ioctl_channel_submit(struct drm_device *drm, void *data,
From: Josef Bacik <[email protected]>
commit 120de408e4b97504a2d9b5ca534b383de2c73d49 upstream.
Now that we clear the extent buffer uptodate if we fail to write it out
we need to check to see if our root node is uptodate before we search
down it. Otherwise we could return stale data (or potentially corrupt
data that was caught by the write verification step) and think that the
path is OK to search down.
CC: [email protected] # 5.4+
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/ctree.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1568,12 +1568,9 @@ static struct extent_buffer *btrfs_searc
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *b;
- int root_lock;
+ int root_lock = 0;
int level = 0;
- /* We try very hard to do read locks on the root */
- root_lock = BTRFS_READ_LOCK;
-
if (p->search_commit_root) {
/*
* The commit roots are read only so we always do read locks,
@@ -1611,6 +1608,9 @@ static struct extent_buffer *btrfs_searc
goto out;
}
+ /* We try very hard to do read locks on the root */
+ root_lock = BTRFS_READ_LOCK;
+
/*
* If the level is set to maximum, we can skip trying to get the read
* lock.
@@ -1637,6 +1637,17 @@ static struct extent_buffer *btrfs_searc
level = btrfs_header_level(b);
out:
+ /*
+ * The root may have failed to write out at some point, and thus is no
+ * longer valid, return an error in this case.
+ */
+ if (!extent_buffer_uptodate(b)) {
+ if (root_lock)
+ btrfs_tree_unlock_rw(b, root_lock);
+ free_extent_buffer(b);
+ return ERR_PTR(-EIO);
+ }
+
p->nodes[level] = b;
if (!p->skip_locking)
p->locks[level] = root_lock;
From: Jan Kara <[email protected]>
commit 4013d47a5307fdb5c13370b5392498b00fedd274 upstream.
When we succeed in enabling some quota type but fail to enable another
one with quota feature, we correctly disable all enabled quota types.
However we forget to reset i_data_sem lockdep class. When the inode gets
freed and reused, it will inherit this lockdep class (i_data_sem is
initialized only when a slab is created) and thus eventually lockdep
barfs about possible deadlocks.
Reported-and-tested-by: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6352,8 +6352,19 @@ int ext4_enable_quotas(struct super_bloc
"Failed to enable quota tracking "
"(type=%d, err=%d). Please run "
"e2fsck to fix.", type, err);
- for (type--; type >= 0; type--)
+ for (type--; type >= 0; type--) {
+ struct inode *inode;
+
+ inode = sb_dqopt(sb)->files[type];
+ if (inode)
+ inode = igrab(inode);
dquot_quota_off(sb, type);
+ if (inode) {
+ lockdep_set_quota_inode(inode,
+ I_DATA_SEM_NORMAL);
+ iput(inode);
+ }
+ }
return err;
}
From: Lucas Stach <[email protected]>
commit 6dfa2fab8ddd46faa771a102672176bee7a065de upstream.
Currently we allow rediculous amounts of kernel memory being allocated
via the etnaviv GEM_SUBMIT ioctl, which is a pretty easy DoS vector. Put
some reasonable limits in to fix this.
The commandstream size is limited to 64KB, which was already a soft limit
on older kernels after which the kernel only took submits on a best effort
base, so there is no userspace that tries to submit commandstreams larger
than this. Even if the whole commandstream is a single incrementing address
load, the size limit also limits the number of potential relocs and
referenced buffers to slightly under 64K, so use the same limit for those
arguments. The performance monitoring infrastructure currently supports
less than 50 performance counter signals, so limiting them to 128 on a
single submit seems like a reasonably future-proof number for now. This
number can be bumped if needed without breaking the interface.
Cc: [email protected]
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Christian Gmeiner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
@@ -469,6 +469,12 @@ int etnaviv_ioctl_gem_submit(struct drm_
return -EINVAL;
}
+ if (args->stream_size > SZ_64K || args->nr_relocs > SZ_64K ||
+ args->nr_bos > SZ_64K || args->nr_pmrs > 128) {
+ DRM_ERROR("submit arguments out of size limits\n");
+ return -EINVAL;
+ }
+
/*
* Copy the command submission and bo array to kernel space in
* one go, and do this outside of any locks.
From: Filipe Manana <[email protected]>
commit 232796df8c1437c41d308d161007f0715bac0a54 upstream.
When enabling quotas, we attempt to commit a transaction while holding the
mutex fs_info->qgroup_ioctl_lock. This can result on a deadlock with other
quota operations such as:
- qgroup creation and deletion, ioctl BTRFS_IOC_QGROUP_CREATE;
- adding and removing qgroup relations, ioctl BTRFS_IOC_QGROUP_ASSIGN.
This is because these operations join a transaction and after that they
attempt to lock the mutex fs_info->qgroup_ioctl_lock. Acquiring that mutex
after joining or starting a transaction is a pattern followed everywhere
in qgroups, so the quota enablement operation is the one at fault here,
and should not commit a transaction while holding that mutex.
Fix this by making the transaction commit while not holding the mutex.
We are safe from two concurrent tasks trying to enable quotas because
we are serialized by the rw semaphore fs_info->subvol_sem at
btrfs_ioctl_quota_ctl(), which is the only call site for enabling
quotas.
When this deadlock happens, it produces a trace like the following:
INFO: task syz-executor:25604 blocked for more than 143 seconds.
Not tainted 5.15.0-rc6 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:24800 pid:25604 ppid: 24873 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xcd9/0x2530 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
btrfs_commit_transaction+0x994/0x2e90 fs/btrfs/transaction.c:2201
btrfs_quota_enable+0x95c/0x1790 fs/btrfs/qgroup.c:1120
btrfs_ioctl_quota_ctl fs/btrfs/ioctl.c:4229 [inline]
btrfs_ioctl+0x637e/0x7b70 fs/btrfs/ioctl.c:5010
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f86920b2c4d
RSP: 002b:00007f868f61ac58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f86921d90a0 RCX: 00007f86920b2c4d
RDX: 0000000020005e40 RSI: 00000000c0109428 RDI: 0000000000000008
RBP: 00007f869212bd80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86921d90a0
R13: 00007fff6d233e4f R14: 00007fff6d233ff0 R15: 00007f868f61adc0
INFO: task syz-executor:25628 blocked for more than 143 seconds.
Not tainted 5.15.0-rc6 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:29080 pid:25628 ppid: 24873 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xcd9/0x2530 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425
__mutex_lock_common kernel/locking/mutex.c:669 [inline]
__mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729
btrfs_remove_qgroup+0xb7/0x7d0 fs/btrfs/qgroup.c:1548
btrfs_ioctl_qgroup_create fs/btrfs/ioctl.c:4333 [inline]
btrfs_ioctl+0x683c/0x7b70 fs/btrfs/ioctl.c:5014
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Hao Sun <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsZQF19bQ1C6=yetF3BvL10OSORpFUcWXTP6HErshDB4dQ@mail.gmail.com/
Fixes: 340f1aa27f36 ("btrfs: qgroups: Move transaction management inside btrfs_quota_enable/disable")
CC: [email protected] # 4.19
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/qgroup.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -940,6 +940,14 @@ int btrfs_quota_enable(struct btrfs_fs_i
int ret = 0;
int slot;
+ /*
+ * We need to have subvol_sem write locked, to prevent races between
+ * concurrent tasks trying to enable quotas, because we will unlock
+ * and relock qgroup_ioctl_lock before setting fs_info->quota_root
+ * and before setting BTRFS_FS_QUOTA_ENABLED.
+ */
+ lockdep_assert_held_write(&fs_info->subvol_sem);
+
mutex_lock(&fs_info->qgroup_ioctl_lock);
if (fs_info->quota_root)
goto out;
@@ -1117,8 +1125,19 @@ out_add_root:
goto out_free_path;
}
+ mutex_unlock(&fs_info->qgroup_ioctl_lock);
+ /*
+ * Commit the transaction while not holding qgroup_ioctl_lock, to avoid
+ * a deadlock with tasks concurrently doing other qgroup operations, such
+ * adding/removing qgroups or adding/deleting qgroup relations for example,
+ * because all qgroup operations first start or join a transaction and then
+ * lock the qgroup_ioctl_lock mutex.
+ * We are safe from a concurrent task trying to enable quotas, by calling
+ * this function, since we are serialized by fs_info->subvol_sem.
+ */
ret = btrfs_commit_transaction(trans);
trans = NULL;
+ mutex_lock(&fs_info->qgroup_ioctl_lock);
if (ret)
goto out_free_path;
From: Yizhuo Zhai <[email protected]>
commit 0726ed3065eeb910f9cea0c933bc021a848e00b3 upstream.
In function enable_stream_features(), the variable "old_downspread.raw"
could be uninitialized if core_link_read_dpcd() fails, however, it is
used in the later if statement, and further, core_link_write_dpcd()
may write random value, which is potentially unsafe.
Fixes: 6016cd9dba0f ("drm/amd/display: add helper for enabling mst stream features")
Cc: [email protected]
Signed-off-by: Yizhuo Zhai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1696,6 +1696,8 @@ static void enable_stream_features(struc
union down_spread_ctrl old_downspread;
union down_spread_ctrl new_downspread;
+ memset(&old_downspread, 0, sizeof(old_downspread));
+
core_link_read_dpcd(link, DP_DOWNSPREAD_CTRL,
&old_downspread.raw, sizeof(old_downspread));
From: Tudor Ambarus <[email protected]>
commit bccfb96b59179d4f96cbbd1ddff8fac6d335eae4 upstream.
tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove
at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that
assume that tx_submit() starts the transfer must be updated and call
dma_async_issue_pending() if they miss to call it (one example is
atmel_serial).
As the at_xdmac_start_xfer() is now called only from
at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the
at_xdmac_chan_is_enabled() check is no longer needed in
at_xdmac_start_xfer(), thus remove it.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -385,9 +385,6 @@ static void at_xdmac_start_xfer(struct a
dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, first);
- if (at_xdmac_chan_is_enabled(atchan))
- return;
-
/* Set transfer as active to not try to start it again. */
first->active_xfer = true;
@@ -479,9 +476,6 @@ static dma_cookie_t at_xdmac_tx_submit(s
dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
__func__, atchan, desc);
list_add_tail(&desc->xfer_node, &atchan->xfers_list);
- if (list_is_singular(&atchan->xfers_list))
- at_xdmac_start_xfer(atchan, desc);
-
spin_unlock_irqrestore(&atchan->lock, irqflags);
return cookie;
}
From: Robert Hancock <[email protected]>
commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream.
When resetting the device, wait for the PhyRstCmplt bit to be set
in the interrupt status register before continuing initialization, to
ensure that the core is actually ready. When using an external PHY, this
also ensures we do not start trying to access the PHY while it is still
in reset. The PHY reset is initiated by the core reset which is
triggered just above, but remains asserted for 5ms after the core is
reset according to the documentation.
The MgtRdy bit could also be waited for, but unfortunately when using
7-series devices, the bit does not appear to work as documented (it
seems to behave as some sort of link state indication and not just an
indication the transceiver is ready) so it can't really be relied on for
this purpose.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -516,6 +516,16 @@ static int __axienet_device_reset(struct
return ret;
}
+ /* Wait for PhyRstCmplt bit to be set, indicating the PHY reset has finished */
+ ret = read_poll_timeout(axienet_ior, value,
+ value & XAE_INT_PHYRSTCMPLT_MASK,
+ DELAY_OF_ONE_MILLISEC, 50000, false, lp,
+ XAE_IS_OFFSET);
+ if (ret) {
+ dev_err(lp->dev, "%s: timeout waiting for PhyRstCmplt\n", __func__);
+ return ret;
+ }
+
return 0;
}
From: Tudor Ambarus <[email protected]>
commit 912f7c6f7fac273f40e621447cf17d14b50d6e5b upstream.
The hardware channel next descriptor view structure contains just
fields of 32 bits, while dma_addr_t can be of type u64 or u32
depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with
what the hardware expects.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -253,15 +253,15 @@ struct at_xdmac {
/* Linked List Descriptor */
struct at_xdmac_lld {
- dma_addr_t mbr_nda; /* Next Descriptor Member */
- u32 mbr_ubc; /* Microblock Control Member */
- dma_addr_t mbr_sa; /* Source Address Member */
- dma_addr_t mbr_da; /* Destination Address Member */
- u32 mbr_cfg; /* Configuration Register */
- u32 mbr_bc; /* Block Control Register */
- u32 mbr_ds; /* Data Stride Register */
- u32 mbr_sus; /* Source Microblock Stride Register */
- u32 mbr_dus; /* Destination Microblock Stride Register */
+ u32 mbr_nda; /* Next Descriptor Member */
+ u32 mbr_ubc; /* Microblock Control Member */
+ u32 mbr_sa; /* Source Address Member */
+ u32 mbr_da; /* Destination Address Member */
+ u32 mbr_cfg; /* Configuration Register */
+ u32 mbr_bc; /* Block Control Register */
+ u32 mbr_ds; /* Data Stride Register */
+ u32 mbr_sus; /* Source Microblock Stride Register */
+ u32 mbr_dus; /* Destination Microblock Stride Register */
};
/* 64-bit alignment needed to update CNDA and CUBC registers in an atomic way. */
From: Wen Gu <[email protected]>
commit 56d99e81ecbc997a5f984684d0eeb583992b2072 upstream.
A hung_task is observed when removing SMC-R devices. Suppose that
a link group has two active links(lnk_A, lnk_B) associated with two
different SMC-R devices(dev_A, dev_B). When dev_A is removed, the
link group will be removed from smc_lgr_list and added into
lgr_linkdown_list. lnk_A will be cleared and smcibdev(A)->lnk_cnt
will reach to zero. However, when dev_B is removed then, the link
group can't be found in smc_lgr_list and lnk_B won't be cleared,
making smcibdev->lnk_cnt never reaches zero, which causes a hung_task.
This patch fixes this issue by restoring the implementation of
smc_smcr_terminate_all() to what it was before commit 349d43127dac
("net/smc: fix kernel panic caused by race of smc_sock"). The original
implementation also satisfies the intention that make sure QP destroy
earlier than CQ destroy because we will always wait for smcibdev->lnk_cnt
reaches zero, which guarantees QP has been destroyed.
Fixes: 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
Signed-off-by: Wen Gu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_core.c | 17 +----------------
1 file changed, 1 insertion(+), 16 deletions(-)
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -1387,16 +1387,11 @@ void smc_smcd_terminate_all(struct smcd_
/* Called when an SMCR device is removed or the smc module is unloaded.
* If smcibdev is given, all SMCR link groups using this device are terminated.
* If smcibdev is NULL, all SMCR link groups are terminated.
- *
- * We must wait here for QPs been destroyed before we destroy the CQs,
- * or we won't received any CQEs and cdc_pend_tx_wr cannot reach 0 thus
- * smc_sock cannot be released.
*/
void smc_smcr_terminate_all(struct smc_ib_device *smcibdev)
{
struct smc_link_group *lgr, *lg;
LIST_HEAD(lgr_free_list);
- LIST_HEAD(lgr_linkdown_list);
int i;
spin_lock_bh(&smc_lgr_list.lock);
@@ -1408,7 +1403,7 @@ void smc_smcr_terminate_all(struct smc_i
list_for_each_entry_safe(lgr, lg, &smc_lgr_list.list, list) {
for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
if (lgr->lnk[i].smcibdev == smcibdev)
- list_move_tail(&lgr->list, &lgr_linkdown_list);
+ smcr_link_down_cond_sched(&lgr->lnk[i]);
}
}
}
@@ -1420,16 +1415,6 @@ void smc_smcr_terminate_all(struct smc_i
__smc_lgr_terminate(lgr, false);
}
- list_for_each_entry_safe(lgr, lg, &lgr_linkdown_list, list) {
- for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
- if (lgr->lnk[i].smcibdev == smcibdev) {
- mutex_lock(&lgr->llc_conf_mutex);
- smcr_link_down_cond(&lgr->lnk[i]);
- mutex_unlock(&lgr->llc_conf_mutex);
- }
- }
- }
-
if (smcibdev) {
if (atomic_read(&smcibdev->lnk_cnt))
wait_event(smcibdev->lnks_deleted,
From: Adrian Hunter <[email protected]>
commit 62942e9fda9fd1def10ffcbd5e1c025b3c9eec17 upstream.
Using grep -C with perf script -D can give erroneous results as grep loses
lines due to non-printable characters, for example, below the 0020, 0060
and 0070 lines are missing:
$ perf script -D | grep -C10 AUX | head
. 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................
. 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................
. 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
. 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................
. 0090: 00 00 00 00 00 00 00 00 ........
0 0 0x450 [0x98]: PERF_RECORD_AUXTRACE_INFO type: 1
PMU Type 8
Time Shift 31
perf's isprint() is a custom implementation from the kernel, but the
kernel's _ctype appears to include characters from Latin-1 Supplement which
is not compatible with, for example, UTF-8. Fix by checking also isascii().
After:
$ tools/perf/perf script -D | grep -C10 AUX | head
. 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................
. 0020: 03 84 32 2f 00 00 00 00 63 7c 4f d2 fa ff ff ff ..2/....c|O.....
. 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................
. 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
. 0060: 00 02 00 00 00 00 00 00 00 c0 03 00 00 00 00 00 ................
. 0070: e2 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................
. 0090: 00 00 00 00 00 00 00 00 ........
Fixes: 3052ba56bcb58904 ("tools perf: Move from sane_ctype.h obtained from git to the Linux's original")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -179,7 +179,7 @@ static int trace_event_printer(enum bina
break;
case BINARY_PRINT_CHAR_DATA:
printed += color_fprintf(fp, color, "%c",
- isprint(ch) ? ch : '.');
+ isprint(ch) && isascii(ch) ? ch : '.');
break;
case BINARY_PRINT_CHAR_PAD:
printed += color_fprintf(fp, color, " ");
From: Guillaume Nault <[email protected]>
commit 23e7b1bfed61e301853b5e35472820d919498278 upstream.
Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"),
clear the ECN bits from iph->tos when setting ->flowi4_tos.
This ensures that the last bit of ->flowi4_tos is cleared, so
ip_route_output_key_hash() isn't going to restrict the scope of the
route lookup.
Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason
to clear the high order bits.
Found by code inspection, compile tested only.
Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups")
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_policy.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -31,6 +31,7 @@
#include <linux/if_tunnel.h>
#include <net/dst.h>
#include <net/flow.h>
+#include <net/inet_ecn.h>
#include <net/xfrm.h>
#include <net/ip.h>
#include <net/gre.h>
@@ -3297,7 +3298,7 @@ decode_session4(struct sk_buff *skb, str
fl4->flowi4_proto = iph->protocol;
fl4->daddr = reverse ? iph->saddr : iph->daddr;
fl4->saddr = reverse ? iph->daddr : iph->saddr;
- fl4->flowi4_tos = iph->tos;
+ fl4->flowi4_tos = iph->tos & ~INET_ECN_MASK;
if (!ip_is_fragment(iph)) {
switch (iph->protocol) {
From: Eric W. Biederman <[email protected]>
commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.
In the function bacct_add_task the code reading task->exit_code was
introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.
As best as I can figure the intent is to return task->exit_code after
a task exits. The field is returned with per task fields, so the
exit_code of the entire process is not wanted. Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code. The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.
It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.
Make ac_exitcode a reliable per task value by always returning it for
every exited task.
Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.
Cc: Balbir Singh <[email protected]>
Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/tsacct.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -38,11 +38,10 @@ void bacct_add_tsk(struct user_namespace
stats->ac_btime = clamp_t(time64_t, btime, 0, U32_MAX);
stats->ac_btime64 = btime;
- if (thread_group_leader(tsk)) {
+ if (tsk->flags & PF_EXITING)
stats->ac_exitcode = tsk->exit_code;
- if (tsk->flags & PF_FORKNOEXEC)
- stats->ac_flag |= AFORK;
- }
+ if (thread_group_leader(tsk) && (tsk->flags & PF_FORKNOEXEC))
+ stats->ac_flag |= AFORK;
if (tsk->flags & PF_SUPERPRIV)
stats->ac_flag |= ASU;
if (tsk->flags & PF_DUMPCORE)
From: Tudor Ambarus <[email protected]>
commit 1385eb4d14d447cc5d744bc2ac34f43be66c9963 upstream.
AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2,
because of the wrong bit handling. Fix it.
Fixes: ee0fe35c8dcd ("dmaengine: xdmac: Handle descriptor's view 3 registers")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -99,6 +99,7 @@
#define AT_XDMAC_CNDC_NDE (0x1 << 0) /* Channel x Next Descriptor Enable */
#define AT_XDMAC_CNDC_NDSUP (0x1 << 1) /* Channel x Next Descriptor Source Update */
#define AT_XDMAC_CNDC_NDDUP (0x1 << 2) /* Channel x Next Descriptor Destination Update */
+#define AT_XDMAC_CNDC_NDVIEW_MASK GENMASK(28, 27)
#define AT_XDMAC_CNDC_NDVIEW_NDV0 (0x0 << 3) /* Channel x Next Descriptor View 0 */
#define AT_XDMAC_CNDC_NDVIEW_NDV1 (0x1 << 3) /* Channel x Next Descriptor View 1 */
#define AT_XDMAC_CNDC_NDVIEW_NDV2 (0x2 << 3) /* Channel x Next Descriptor View 2 */
@@ -402,7 +403,8 @@ static void at_xdmac_start_xfer(struct a
*/
if (at_xdmac_chan_is_cyclic(atchan))
reg = AT_XDMAC_CNDC_NDVIEW_NDV1;
- else if (first->lld.mbr_ubc & AT_XDMAC_MBR_UBC_NDV3)
+ else if ((first->lld.mbr_ubc &
+ AT_XDMAC_CNDC_NDVIEW_MASK) == AT_XDMAC_MBR_UBC_NDV3)
reg = AT_XDMAC_CNDC_NDVIEW_NDV3;
else
reg = AT_XDMAC_CNDC_NDVIEW_NDV2;
From: Tom Rix <[email protected]>
commit 214b3369ab9b0a6f28d6c970220c209417edbc65 upstream.
Clang static analysis reports this problem
mtk_eth_soc.c:394:7: warning: Branch condition evaluates
to a garbage value
if (err)
^~~
err is not initialized and only conditionally set.
So intitialize err.
Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -224,7 +224,7 @@ static void mtk_mac_config(struct phylin
phylink_config);
struct mtk_eth *eth = mac->hw;
u32 mcr_cur, mcr_new, sid, i;
- int val, ge_mode, err;
+ int val, ge_mode, err = 0;
/* MT76x8 has no hardware settings between for the MAC */
if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) &&
From: Robert Hancock <[email protected]>
commit 70f5817deddbc6ef3faa35841cab83c280cc653a upstream.
The driver will not work properly if the TX ring size is set to below
MAX_SKB_FRAGS + 1 since it needs to hold at least one full maximally
fragmented packet in the TX ring. Limit setting the ring size to below
this value.
Fixes: 8b09ca823ffb4 ("net: axienet: Make RX/TX ring sizes configurable")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -43,6 +43,7 @@
/* Descriptors defines for Tx and Rx DMA */
#define TX_BD_NUM_DEFAULT 64
#define RX_BD_NUM_DEFAULT 1024
+#define TX_BD_NUM_MIN (MAX_SKB_FRAGS + 1)
#define TX_BD_NUM_MAX 4096
#define RX_BD_NUM_MAX 4096
@@ -1364,7 +1365,8 @@ static int axienet_ethtools_set_ringpara
if (ering->rx_pending > RX_BD_NUM_MAX ||
ering->rx_mini_pending ||
ering->rx_jumbo_pending ||
- ering->rx_pending > TX_BD_NUM_MAX)
+ ering->tx_pending < TX_BD_NUM_MIN ||
+ ering->tx_pending > TX_BD_NUM_MAX)
return -EINVAL;
if (netif_running(ndev))
From: Guillaume Nault <[email protected]>
commit f7716b318568b22fbf0e3be99279a979e217cf71 upstream.
Mask the ECN bits before initialising ->flowi4_tos. The tunnel key may
have the last ECN bit set, which will interfere with the route lookup
process as ip_route_output_key_hash() interpretes this bit specially
(to restrict the route scope).
Found by code inspection, compile tested only.
Fixes: 962924fa2b7a ("ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit")
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_gre.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -604,8 +604,9 @@ static int gre_fill_metadata_dst(struct
key = &info->key;
ip_tunnel_init_flow(&fl4, IPPROTO_GRE, key->u.ipv4.dst, key->u.ipv4.src,
- tunnel_id_to_key32(key->tun_id), key->tos, 0,
- skb->mark, skb_get_hash(skb));
+ tunnel_id_to_key32(key->tun_id),
+ key->tos & ~INET_ECN_MASK, 0, skb->mark,
+ skb_get_hash(skb));
rt = ip_route_output_key(dev_net(dev), &fl4);
if (IS_ERR(rt))
return PTR_ERR(rt);
From: Slark Xiao <[email protected]>
commit f542cdfa3083a309e3caafbbdf41490c4935492a upstream.
In pci_generic.c there is a 'mru_default' in struct mhi_pci_dev_info.
This value shall be used for whole mhi if it's given a value for a specific product.
But in function mhi_net_rx_refill_work(), it's still using hard code value MHI_DEFAULT_MRU.
'mru_default' shall have higher priority than MHI_DEFAULT_MRU.
And after checking, this change could help fix a data connection lost issue.
Fixes: 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
Signed-off-by: Shujun Wang <[email protected]>
Signed-off-by: Slark Xiao <[email protected]>
Reviewed-by: Loic Poulain <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wwan/mhi_wwan_mbim.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wwan/mhi_wwan_mbim.c b/drivers/net/wwan/mhi_wwan_mbim.c
index 71bf9b4f769f..6872782e8dd8 100644
--- a/drivers/net/wwan/mhi_wwan_mbim.c
+++ b/drivers/net/wwan/mhi_wwan_mbim.c
@@ -385,13 +385,13 @@ static void mhi_net_rx_refill_work(struct work_struct *work)
int err;
while (!mhi_queue_is_full(mdev, DMA_FROM_DEVICE)) {
- struct sk_buff *skb = alloc_skb(MHI_DEFAULT_MRU, GFP_KERNEL);
+ struct sk_buff *skb = alloc_skb(mbim->mru, GFP_KERNEL);
if (unlikely(!skb))
break;
err = mhi_queue_skb(mdev, DMA_FROM_DEVICE, skb,
- MHI_DEFAULT_MRU, MHI_EOT);
+ mbim->mru, MHI_EOT);
if (unlikely(err)) {
kfree_skb(skb);
break;
--
2.34.1
From: Miaoqian Lin <[email protected]>
commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream.
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/i825xx/sni_82596.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/i825xx/sni_82596.c
+++ b/drivers/net/ethernet/i825xx/sni_82596.c
@@ -117,9 +117,10 @@ static int sni_82596_probe(struct platfo
netdevice->dev_addr[5] = readb(eth_addr + 0x06);
iounmap(eth_addr);
- if (!netdevice->irq) {
+ if (netdevice->irq < 0) {
printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
__FILE__, netdevice->base_addr);
+ retval = netdevice->irq;
goto probe_failed;
}
From: Quentin Monnet <[email protected]>
commit 986dec18bbf41f50edc2e0aa4ac5ef8e0f64f328 upstream.
Mixed indentation levels in the lists of options in bpftool's
documentation produces some unexpected results. For the "bpftool" man
page, it prints a warning:
$ make -C bpftool.8
GEN bpftool.8
<stdin>:26: (ERROR/3) Unexpected indentation.
For other pages, there is no warning, but it results in a line break
appearing in the option lists in the generated man pages.
RST paragraphs should have a uniform indentation level. Let's fix it.
Fixes: c07ba629df97 ("tools: bpftool: Update and synchronise option list in doc and help msg")
Fixes: 8cc8c6357c8f ("tools: bpftool: Document and add bash completion for -L, -B options")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/bpf/bpftool/Documentation/bpftool-btf.rst | 2 +-
tools/bpf/bpftool/Documentation/bpftool-cgroup.rst | 2 +-
tools/bpf/bpftool/Documentation/bpftool-gen.rst | 2 +-
tools/bpf/bpftool/Documentation/bpftool-link.rst | 2 +-
tools/bpf/bpftool/Documentation/bpftool-map.rst | 6 +++---
tools/bpf/bpftool/Documentation/bpftool-prog.rst | 8 ++++----
tools/bpf/bpftool/Documentation/bpftool.rst | 6 +++---
7 files changed, 14 insertions(+), 14 deletions(-)
--- a/tools/bpf/bpftool/Documentation/bpftool-btf.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-btf.rst
@@ -13,7 +13,7 @@ SYNOPSIS
**bpftool** [*OPTIONS*] **btf** *COMMAND*
*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | {**-d** | **--debug** } |
- { **-B** | **--base-btf** } }
+ { **-B** | **--base-btf** } }
*COMMANDS* := { **dump** | **help** }
--- a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
@@ -13,7 +13,7 @@ SYNOPSIS
**bpftool** [*OPTIONS*] **cgroup** *COMMAND*
*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-d** | **--debug** } |
- { **-f** | **--bpffs** } }
+ { **-f** | **--bpffs** } }
*COMMANDS* :=
{ **show** | **list** | **tree** | **attach** | **detach** | **help** }
--- a/tools/bpf/bpftool/Documentation/bpftool-gen.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-gen.rst
@@ -13,7 +13,7 @@ SYNOPSIS
**bpftool** [*OPTIONS*] **gen** *COMMAND*
*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-d** | **--debug** } |
- { **-L** | **--use-loader** } }
+ { **-L** | **--use-loader** } }
*COMMAND* := { **object** | **skeleton** | **help** }
--- a/tools/bpf/bpftool/Documentation/bpftool-link.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-link.rst
@@ -13,7 +13,7 @@ SYNOPSIS
**bpftool** [*OPTIONS*] **link** *COMMAND*
*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-d** | **--debug** } |
- { **-f** | **--bpffs** } | { **-n** | **--nomount** } }
+ { **-f** | **--bpffs** } | { **-n** | **--nomount** } }
*COMMANDS* := { **show** | **list** | **pin** | **help** }
--- a/tools/bpf/bpftool/Documentation/bpftool-map.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst
@@ -13,11 +13,11 @@ SYNOPSIS
**bpftool** [*OPTIONS*] **map** *COMMAND*
*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-d** | **--debug** } |
- { **-f** | **--bpffs** } | { **-n** | **--nomount** } }
+ { **-f** | **--bpffs** } | { **-n** | **--nomount** } }
*COMMANDS* :=
- { **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext**
- | **delete** | **pin** | **help** }
+ { **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** |
+ **delete** | **pin** | **help** }
MAP COMMANDS
=============
--- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
@@ -13,12 +13,12 @@ SYNOPSIS
**bpftool** [*OPTIONS*] **prog** *COMMAND*
*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-d** | **--debug** } |
- { **-f** | **--bpffs** } | { **-m** | **--mapcompat** } | { **-n** | **--nomount** } |
- { **-L** | **--use-loader** } }
+ { **-f** | **--bpffs** } | { **-m** | **--mapcompat** } | { **-n** | **--nomount** } |
+ { **-L** | **--use-loader** } }
*COMMANDS* :=
- { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load**
- | **loadall** | **help** }
+ { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** |
+ **loadall** | **help** }
PROG COMMANDS
=============
--- a/tools/bpf/bpftool/Documentation/bpftool.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool.rst
@@ -19,14 +19,14 @@ SYNOPSIS
*OBJECT* := { **map** | **program** | **cgroup** | **perf** | **net** | **feature** }
*OPTIONS* := { { **-V** | **--version** } |
- { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-d** | **--debug** } }
+ { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-d** | **--debug** } }
*MAP-COMMANDS* :=
{ **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext** |
- **delete** | **pin** | **event_pipe** | **help** }
+ **delete** | **pin** | **event_pipe** | **help** }
*PROG-COMMANDS* := { **show** | **list** | **dump jited** | **dump xlated** | **pin** |
- **load** | **attach** | **detach** | **help** }
+ **load** | **attach** | **detach** | **help** }
*CGROUP-COMMANDS* := { **show** | **list** | **attach** | **detach** | **help** }
From: Chao Yu <[email protected]>
commit f6db43076d190d9bf75559dec28e18b9d12e4ce5 upstream.
As report by Wenqing Liu in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215231
If we enable CONFIG_F2FS_CHECK_FS config, and with fuzzed image attached
in above link, we will encounter panic when executing below script:
1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp
F2FS-fs (loop11): mismatched blkaddr 5765 (source_blkaddr 1) in seg 3
kernel BUG at fs/f2fs/gc.c:1042!
do_garbage_collect+0x90f/0xa80 [f2fs]
f2fs_gc+0x294/0x12a0 [f2fs]
f2fs_balance_fs+0x2c5/0x7d0 [f2fs]
f2fs_create+0x239/0xd90 [f2fs]
lookup_open+0x45e/0xa90
open_last_lookups+0x203/0x670
path_openat+0xae/0x490
do_filp_open+0xbc/0x160
do_sys_openat2+0x2f1/0x500
do_sys_open+0x5e/0xa0
__x64_sys_openat+0x28/0x40
Previously, f2fs tries to catch data inconcistency exception in between
SSA and SIT table during GC, however once the exception is caught, it will
call f2fs_bug_on to hang kernel, it's not needed, instead, let's set
SBI_NEED_FSCK flag and skip migrating current block.
Fixes: bbf9f7d90f21 ("f2fs: Fix indefinite loop in f2fs_gc()")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/gc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1039,7 +1039,7 @@ static bool is_alive(struct f2fs_sb_info
if (!test_and_set_bit(segno, SIT_I(sbi)->invalid_segmap)) {
f2fs_err(sbi, "mismatched blkaddr %u (source_blkaddr %u) in seg %u",
blkaddr, source_blkaddr, segno);
- f2fs_bug_on(sbi, 1);
+ set_sbi_flag(sbi, SBI_NEED_FSCK);
}
}
#endif
From: Lukas Wunner <[email protected]>
commit 23584c1ed3e15a6f4bfab8dc5a88d94ab929ee12 upstream.
The Power Fault Detected bit in the Slot Status register differs from
all other hotplug events in that it is sticky: It can only be cleared
after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8:
If a power controller detects a main power fault on the hot-plug slot,
it must automatically set its internal main power fault latch [...].
The main power fault latch is cleared when software turns off power to
the hot-plug slot.
The stickiness used to cause interrupt storms and infinite loops which
were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault
interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable
software notification on empty slots").
Unfortunately in 2020 the infinite loop issue was inadvertently
reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt
race"): The hardirq handler pciehp_isr() clears the PFD bit until
pciehp's power_fault_detected flag is set. That happens in the IRQ
thread pciehp_ist(), which never learns of the event because the hardirq
handler is stuck in an infinite loop. Fix by setting the
power_fault_detected flag already in the hardirq handler.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989
Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com
Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race")
Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de
Reported-by: Joseph Bao <[email protected]>
Tested-by: Joseph Bao <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: [email protected] # v4.19+
Cc: Stuart Hayes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/hotplug/pciehp_hpc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -642,6 +642,8 @@ read_status:
*/
if (ctrl->power_fault_detected)
status &= ~PCI_EXP_SLTSTA_PFD;
+ else if (status & PCI_EXP_SLTSTA_PFD)
+ ctrl->power_fault_detected = true;
events |= status;
if (!events) {
@@ -651,7 +653,7 @@ read_status:
}
if (status) {
- pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events);
+ pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, status);
/*
* In MSI mode, all event bits must be zero before the port
@@ -725,8 +727,7 @@ static irqreturn_t pciehp_ist(int irq, v
}
/* Check Power Fault Detected */
- if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
- ctrl->power_fault_detected = 1;
+ if (events & PCI_EXP_SLTSTA_PFD) {
ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
PCI_EXP_SLTCTL_ATTN_IND_ON);
From: Robert Hancock <[email protected]>
commit bb193e3db8b86a63f26889c99e14fd30c9ebd72a upstream.
Network driver documentation indicates we should be avoiding returning
NETDEV_TX_BUSY from ndo_start_xmit in normal cases, since it requires
the packets to be requeued. Instead the queue should be stopped after
a packet is added to the TX ring when there may not be enough room for an
additional one. Also, when TX ring entries are completed, we should only
wake the queue if we know there is room for another full maximally
fragmented packet.
Print a warning if there is insufficient space at the start of start_xmit,
since this should no longer happen.
Combined with increasing the default TX ring size (in a subsequent
patch), this appears to recover the TX performance lost by previous changes
to actually manage the TX ring state properly.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 86 ++++++++++++----------
1 file changed, 47 insertions(+), 39 deletions(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -661,6 +661,32 @@ static int axienet_free_tx_chain(struct
}
/**
+ * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy
+ * @lp: Pointer to the axienet_local structure
+ * @num_frag: The number of BDs to check for
+ *
+ * Return: 0, on success
+ * NETDEV_TX_BUSY, if any of the descriptors are not free
+ *
+ * This function is invoked before BDs are allocated and transmission starts.
+ * This function returns 0 if a BD or group of BDs can be allocated for
+ * transmission. If the BD or any of the BDs are not free the function
+ * returns a busy status. This is invoked from axienet_start_xmit.
+ */
+static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
+ int num_frag)
+{
+ struct axidma_bd *cur_p;
+
+ /* Ensure we see all descriptor updates from device or TX IRQ path */
+ rmb();
+ cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
+ if (cur_p->cntrl)
+ return NETDEV_TX_BUSY;
+ return 0;
+}
+
+/**
* axienet_start_xmit_done - Invoked once a transmit is completed by the
* Axi DMA Tx channel.
* @ndev: Pointer to the net_device structure
@@ -689,33 +715,8 @@ static void axienet_start_xmit_done(stru
/* Matches barrier in axienet_start_xmit */
smp_mb();
- netif_wake_queue(ndev);
-}
-
-/**
- * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy
- * @lp: Pointer to the axienet_local structure
- * @num_frag: The number of BDs to check for
- *
- * Return: 0, on success
- * NETDEV_TX_BUSY, if any of the descriptors are not free
- *
- * This function is invoked before BDs are allocated and transmission starts.
- * This function returns 0 if a BD or group of BDs can be allocated for
- * transmission. If the BD or any of the BDs are not free the function
- * returns a busy status. This is invoked from axienet_start_xmit.
- */
-static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
- int num_frag)
-{
- struct axidma_bd *cur_p;
-
- /* Ensure we see all descriptor updates from device or TX IRQ path */
- rmb();
- cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
- if (cur_p->cntrl)
- return NETDEV_TX_BUSY;
- return 0;
+ if (!axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1))
+ netif_wake_queue(ndev);
}
/**
@@ -748,19 +749,14 @@ axienet_start_xmit(struct sk_buff *skb,
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
if (axienet_check_tx_bd_space(lp, num_frag + 1)) {
- if (netif_queue_stopped(ndev))
- return NETDEV_TX_BUSY;
-
+ /* Should not happen as last start_xmit call should have
+ * checked for sufficient space and queue should only be
+ * woken when sufficient space is available.
+ */
netif_stop_queue(ndev);
-
- /* Matches barrier in axienet_start_xmit_done */
- smp_mb();
-
- /* Space might have just been freed - check again */
- if (axienet_check_tx_bd_space(lp, num_frag + 1))
- return NETDEV_TX_BUSY;
-
- netif_wake_queue(ndev);
+ if (net_ratelimit())
+ netdev_warn(ndev, "TX ring unexpectedly full\n");
+ return NETDEV_TX_BUSY;
}
if (skb->ip_summed == CHECKSUM_PARTIAL) {
@@ -821,6 +817,18 @@ axienet_start_xmit(struct sk_buff *skb,
if (++lp->tx_bd_tail >= lp->tx_bd_num)
lp->tx_bd_tail = 0;
+ /* Stop queue if next transmit may not have space */
+ if (axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) {
+ netif_stop_queue(ndev);
+
+ /* Matches barrier in axienet_start_xmit_done */
+ smp_mb();
+
+ /* Space might have just been freed - check again */
+ if (!axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1))
+ netif_wake_queue(ndev);
+ }
+
return NETDEV_TX_OK;
}
From: Robert Hancock <[email protected]>
commit 04cc2da39698efd7eb2e30c112538922d26f848e upstream.
In some cases where the Xilinx Ethernet core was used in 1000Base-X or
SGMII modes, which use the internal PCS/PMA PHY, and the MGT
transceiver clock source for the PCS was not running at the time the
FPGA logic was loaded, the core would come up in a state where the
PCS could not be found on the MDIO bus. To fix this, the Ethernet core
(including the PCS) should be reset after enabling the clocks, prior to
attempting to access the PCS using of_mdio_find_device.
Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Robert Hancock <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2091,6 +2091,11 @@ static int axienet_probe(struct platform
lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
+ /* Reset core now that clocks are enabled, prior to accessing MDIO */
+ ret = __axienet_device_reset(lp);
+ if (ret)
+ goto cleanup_clk;
+
lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
if (lp->phy_node) {
ret = axienet_mdio_setup(lp);
From: Eric Dumazet <[email protected]>
commit 91341fa0003befd097e190ec2a4bf63ad957c49a upstream.
Both fields can be read/written without synchronization,
add proper accessors and documentation.
Fixes: d5dd88794a13 ("inet: fix various use-after-free in defrags units")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/inet_frag.h | 11 +++++++++--
include/net/ipv6_frag.h | 3 ++-
net/ipv4/inet_fragment.c | 8 +++++---
net/ipv4/ip_fragment.c | 3 ++-
4 files changed, 18 insertions(+), 7 deletions(-)
--- a/include/net/inet_frag.h
+++ b/include/net/inet_frag.h
@@ -117,8 +117,15 @@ int fqdir_init(struct fqdir **fqdirp, st
static inline void fqdir_pre_exit(struct fqdir *fqdir)
{
- fqdir->high_thresh = 0; /* prevent creation of new frags */
- fqdir->dead = true;
+ /* Prevent creation of new frags.
+ * Pairs with READ_ONCE() in inet_frag_find().
+ */
+ WRITE_ONCE(fqdir->high_thresh, 0);
+
+ /* Pairs with READ_ONCE() in inet_frag_kill(), ip_expire()
+ * and ip6frag_expire_frag_queue().
+ */
+ WRITE_ONCE(fqdir->dead, true);
}
void fqdir_exit(struct fqdir *fqdir);
--- a/include/net/ipv6_frag.h
+++ b/include/net/ipv6_frag.h
@@ -67,7 +67,8 @@ ip6frag_expire_frag_queue(struct net *ne
struct sk_buff *head;
rcu_read_lock();
- if (fq->q.fqdir->dead)
+ /* Paired with the WRITE_ONCE() in fqdir_pre_exit(). */
+ if (READ_ONCE(fq->q.fqdir->dead))
goto out_rcu_unlock;
spin_lock(&fq->q.lock);
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -235,9 +235,9 @@ void inet_frag_kill(struct inet_frag_que
/* The RCU read lock provides a memory barrier
* guaranteeing that if fqdir->dead is false then
* the hash table destruction will not start until
- * after we unlock. Paired with inet_frags_exit_net().
+ * after we unlock. Paired with fqdir_pre_exit().
*/
- if (!fqdir->dead) {
+ if (!READ_ONCE(fqdir->dead)) {
rhashtable_remove_fast(&fqdir->rhashtable, &fq->node,
fqdir->f->rhash_params);
refcount_dec(&fq->refcnt);
@@ -352,9 +352,11 @@ static struct inet_frag_queue *inet_frag
/* TODO : call from rcu_read_lock() and no longer use refcount_inc_not_zero() */
struct inet_frag_queue *inet_frag_find(struct fqdir *fqdir, void *key)
{
+ /* This pairs with WRITE_ONCE() in fqdir_pre_exit(). */
+ long high_thresh = READ_ONCE(fqdir->high_thresh);
struct inet_frag_queue *fq = NULL, *prev;
- if (!fqdir->high_thresh || frag_mem_limit(fqdir) > fqdir->high_thresh)
+ if (!high_thresh || frag_mem_limit(fqdir) > high_thresh)
return NULL;
rcu_read_lock();
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -144,7 +144,8 @@ static void ip_expire(struct timer_list
rcu_read_lock();
- if (qp->q.fqdir->dead)
+ /* Paired with WRITE_ONCE() in fqdir_pre_exit(). */
+ if (READ_ONCE(qp->q.fqdir->dead))
goto out_rcu_unlock;
spin_lock(&qp->q.lock);
From: Leon Romanovsky <[email protected]>
commit e9538f8270db24d272659e15841854c7ea11119e upstream.
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.
Fixes: e44ef4e4516c ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/devlink.c | 2 --
1 file changed, 2 deletions(-)
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -8795,8 +8795,6 @@ static const struct genl_small_ops devli
GENL_DONT_VALIDATE_DUMP_STRICT,
.dumpit = devlink_nl_cmd_health_reporter_dump_get_dumpit,
.flags = GENL_ADMIN_PERM,
- .internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK_OR_PORT |
- DEVLINK_NL_FLAG_NO_LOCK,
},
{
.cmd = DEVLINK_CMD_HEALTH_REPORTER_DUMP_CLEAR,
From: Toke Høiland-Jørgensen <[email protected]>
commit 382778edc8262b7535f00523e9eb22edba1b9816 upstream.
The bpf_xdp_link_update() function didn't check the program type before
updating the program, which made it possible to install any program type as
an XDP program, which is obviously not good. Syzbot managed to trigger this
by swapping in an LWT program on the XDP hook which would crash in a helper
call.
Fix this by adding a check and bailing out if the types don't match.
Fixes: 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by: [email protected]
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -9636,6 +9636,12 @@ static int bpf_xdp_link_update(struct bp
goto out_unlock;
}
old_prog = link->prog;
+ if (old_prog->type != new_prog->type ||
+ old_prog->expected_attach_type != new_prog->expected_attach_type) {
+ err = -EINVAL;
+ goto out_unlock;
+ }
+
if (old_prog == new_prog) {
/* no-op, don't disturb drivers */
bpf_prog_put(new_prog);
From: Mark Chen <[email protected]>
commit 995d948cf2e45834275f07afc1c9881a9902e73c upstream.
If there are failure cases in getting patch status, it should return the
error code (-EIO).
Fixes: fc342c4dc4087 ("Bluetooth: btusb: Add protocol support for MediaTek MT7921U USB devices")
Co-developed-by: Sean Wang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Mark Chen <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2561,6 +2561,7 @@ static int btusb_mtk_setup_firmware_79xx
} else {
bt_dev_err(hdev, "Failed wmt patch dwnld status (%d)",
status);
+ err = -EIO;
goto err_release_fw;
}
}
From: Xin Yin <[email protected]>
commit 0b5b5a62b945a141e64011b2f90ee7e46f14be98 upstream.
For now ,we use ext4_punch_hole() during fast commit replay delete range
procedure. But it will be affected by inode->i_size, which may not
correct during fast commit replay procedure. The following test will
failed.
-create & write foo (len 1000K)
-falloc FALLOC_FL_ZERO_RANGE foo (range 400K - 600K)
-create & fsync bar
-falloc FALLOC_FL_PUNCH_HOLE foo (range 300K-500K)
-fsync foo
-crash before a full commit
After the fast_commit reply procedure, the range 400K-500K will not be
removed. Because in this case, when calling ext4_punch_hole() the
inode->i_size is 0, and it just retruns with doing nothing.
Change to use ext4_ext_remove_space() instead of ext4_punch_hole()
to remove blocks of inode directly.
Signed-off-by: Xin Yin <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/fast_commit.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/fs/ext4/fast_commit.c
+++ b/fs/ext4/fast_commit.c
@@ -1809,11 +1809,14 @@ ext4_fc_replay_del_range(struct super_bl
}
}
- ret = ext4_punch_hole(inode,
- le32_to_cpu(lrange.fc_lblk) << sb->s_blocksize_bits,
- le32_to_cpu(lrange.fc_len) << sb->s_blocksize_bits);
- if (ret)
- jbd_debug(1, "ext4_punch_hole returned %d", ret);
+ down_write(&EXT4_I(inode)->i_data_sem);
+ ret = ext4_ext_remove_space(inode, lrange.fc_lblk,
+ lrange.fc_lblk + lrange.fc_len - 1);
+ up_write(&EXT4_I(inode)->i_data_sem);
+ if (ret) {
+ iput(inode);
+ return 0;
+ }
ext4_ext_replay_shrink_inode(inode,
i_size_read(inode) >> sb->s_blocksize_bits);
ext4_mark_inode_dirty(NULL, inode);
From: Daniel Thompson <[email protected]>
commit c61d7b2ef141abf81140756b45860a2306f395a2 upstream.
Currently the documentation states that channels must be configured before
running the dmatest. This has not been true since commit 6b41030fdc79
("dmaengine: dmatest: Restore default for channel"). Fix accordingly.
Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel")
Signed-off-by: Daniel Thompson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/driver-api/dmaengine/dmatest.rst | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/Documentation/driver-api/dmaengine/dmatest.rst
+++ b/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
Allocating Channels
-------------------
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
Example::
% echo 1 > /sys/module/dmatest/parameters/run
- dmatest: Could not start test, no channels configured
+ dmatest: No channels configured, continue with any
Channels are registered using the "channel" parameter. Channels can be requested by their
name, once requested, the channel is registered and a pending thread is added to the test list.
From: Lukas Bulwahn <[email protected]>
commit 82ca67321f55a8d1da6ac3ed611da3c32818bb37 upstream.
The config RANDOMIZE_SLAB does not exist, the authors probably intended to
refer to the config RANDOMIZE_BASE, which provides kernel address-space
randomization. They probably just confused SLAB with BASE (these two
four-letter words coincidentally share three common letters), as they also
point out the config SLAB_FREELIST_RANDOM as further randomization within
the same sentence.
Fix the reference of the config for kernel address-space randomization to
the config that provides that.
Fixes: 6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre")
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/hw-vuln/spectre.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/admin-guide/hw-vuln/spectre.rst
+++ b/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -468,7 +468,7 @@ Spectre variant 2
before invoking any firmware code to prevent Spectre variant 2 exploits
using the firmware.
- Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+ Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
attacks on the kernel generally more difficult.
From: Andrey Ryabinin <[email protected]>
commit 9731698ecb9c851f353ce2496292ff9fcea39dff upstream.
cpuacct.stat in no-root cgroups shows user time without guest time
included int it. This doesn't match with user time shown in root
cpuacct.stat and /proc/<pid>/stat. This also affects cgroup2's cpu.stat
in the same way.
Make account_guest_time() to add user time to cgroup's cpustat to
fix this.
Fixes: ef12fefabf94 ("cpuacct: add per-cgroup utime/stime statistics")
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/cputime.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -148,10 +148,10 @@ void account_guest_time(struct task_stru
/* Add guest time to cpustat. */
if (task_nice(p) > 0) {
- cpustat[CPUTIME_NICE] += cputime;
+ task_group_account_field(p, CPUTIME_NICE, cputime);
cpustat[CPUTIME_GUEST_NICE] += cputime;
} else {
- cpustat[CPUTIME_USER] += cputime;
+ task_group_account_field(p, CPUTIME_USER, cputime);
cpustat[CPUTIME_GUEST] += cputime;
}
}
From: Alex Deucher <[email protected]>
commit e8309d50e97851ff135c4e33325d37b032666b94 upstream.
It can cause a hang. This is normally not enabled for GPU
hangs on these asics, but was recently enabled for handling
aborted suspends. This causes hangs on some platforms
on suspend.
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Cc: [email protected]
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1858
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/cik.c | 4 ++++
drivers/gpu/drm/amd/amdgpu/vi.c | 4 ++++
2 files changed, 8 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/cik.c
+++ b/drivers/gpu/drm/amd/amdgpu/cik.c
@@ -1428,6 +1428,10 @@ static int cik_asic_reset(struct amdgpu_
{
int r;
+ /* APUs don't have full asic reset */
+ if (adev->flags & AMD_IS_APU)
+ return 0;
+
if (cik_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
dev_info(adev->dev, "BACO reset\n");
r = amdgpu_dpm_baco_reset(adev);
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -956,6 +956,10 @@ static int vi_asic_reset(struct amdgpu_d
{
int r;
+ /* APUs don't have full asic reset */
+ if (adev->flags & AMD_IS_APU)
+ return 0;
+
if (vi_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
dev_info(adev->dev, "BACO reset\n");
r = amdgpu_dpm_baco_reset(adev);
From: Marc Kleine-Budde <[email protected]>
commit 99e7cc3b3f85d9a583ab83f386315c59443509ae upstream.
This patch fixes a typo in the error message in
mcp251xfd_tef_obj_read(), if trying to read too many objects.
Link: https://lore.kernel.org/all/[email protected]
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1336,7 +1336,7 @@ mcp251xfd_tef_obj_read(const struct mcp2
len > tx_ring->obj_num ||
offset + len > tx_ring->obj_num)) {
netdev_err(priv->ndev,
- "Trying to read to many TEF objects (max=%d, offset=%d, len=%d).\n",
+ "Trying to read too many TEF objects (max=%d, offset=%d, len=%d).\n",
tx_ring->obj_num, offset, len);
return -ERANGE;
}
From: Chunguang Xu <[email protected]>
commit 8c80fb312d7abf8bcd66cca1d843a80318a2c522 upstream.
We found on older kernel (3.10) that in the scenario of insufficient
disk space, system may trigger an ABBA deadlock problem, it seems that
this problem still exists in latest kernel, try to fix it here. The
main process triggered by this problem is that task A occupies the PA
and waits for the jbd2 transaction finish, the jbd2 transaction waits
for the completion of task B's IO (plug_list), but task B waits for
the release of PA by task A to finish discard, which indirectly forms
an ABBA deadlock. The related calltrace is as follows:
Task A
vfs_write
ext4_mb_new_blocks()
ext4_mb_mark_diskspace_used() JBD2
jbd2_journal_get_write_access() -> jbd2_journal_commit_transaction()
->schedule() filemap_fdatawait()
| |
| Task B |
| do_unlinkat() |
| ext4_evict_inode() |
| jbd2_journal_begin_ordered_truncate() |
| filemap_fdatawrite_range() |
| ext4_mb_new_blocks() |
-ext4_mb_discard_group_preallocations() <-----
Here, try to cancel ext4_mb_discard_group_preallocations() internal
retry due to PA busy, and do a limited number of retries inside
ext4_mb_discard_preallocations(), which can circumvent the above
problems, but also has some advantages:
1. Since the PA is in a busy state, if other groups have free PAs,
keeping the current PA may help to reduce fragmentation.
2. Continue to traverse forward instead of waiting for the current
group PA to be released. In most scenarios, the PA discard time
can be reduced.
However, in the case of smaller free space, if only a few groups have
space, then due to multiple traversals of the group, it may increase
CPU overhead. But in contrast, I feel that the overall benefit is
better than the cost.
Signed-off-by: Chunguang Xu <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/mballoc.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4814,7 +4814,7 @@ ext4_mb_release_group_pa(struct ext4_bud
*/
static noinline_for_stack int
ext4_mb_discard_group_preallocations(struct super_block *sb,
- ext4_group_t group, int needed)
+ ext4_group_t group, int *busy)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
struct buffer_head *bitmap_bh = NULL;
@@ -4822,8 +4822,7 @@ ext4_mb_discard_group_preallocations(str
struct list_head list;
struct ext4_buddy e4b;
int err;
- int busy = 0;
- int free, free_total = 0;
+ int free = 0;
mb_debug(sb, "discard preallocation for group %u\n", group);
if (list_empty(&grp->bb_prealloc_list))
@@ -4846,19 +4845,14 @@ ext4_mb_discard_group_preallocations(str
goto out_dbg;
}
- if (needed == 0)
- needed = EXT4_CLUSTERS_PER_GROUP(sb) + 1;
-
INIT_LIST_HEAD(&list);
-repeat:
- free = 0;
ext4_lock_group(sb, group);
list_for_each_entry_safe(pa, tmp,
&grp->bb_prealloc_list, pa_group_list) {
spin_lock(&pa->pa_lock);
if (atomic_read(&pa->pa_count)) {
spin_unlock(&pa->pa_lock);
- busy = 1;
+ *busy = 1;
continue;
}
if (pa->pa_deleted) {
@@ -4898,22 +4892,13 @@ repeat:
call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback);
}
- free_total += free;
-
- /* if we still need more blocks and some PAs were used, try again */
- if (free_total < needed && busy) {
- ext4_unlock_group(sb, group);
- cond_resched();
- busy = 0;
- goto repeat;
- }
ext4_unlock_group(sb, group);
ext4_mb_unload_buddy(&e4b);
put_bh(bitmap_bh);
out_dbg:
mb_debug(sb, "discarded (%d) blocks preallocated for group %u bb_free (%d)\n",
- free_total, group, grp->bb_free);
- return free_total;
+ free, group, grp->bb_free);
+ return free;
}
/*
@@ -5455,13 +5440,24 @@ static int ext4_mb_discard_preallocation
{
ext4_group_t i, ngroups = ext4_get_groups_count(sb);
int ret;
- int freed = 0;
+ int freed = 0, busy = 0;
+ int retry = 0;
trace_ext4_mb_discard_preallocations(sb, needed);
+
+ if (needed == 0)
+ needed = EXT4_CLUSTERS_PER_GROUP(sb) + 1;
+ repeat:
for (i = 0; i < ngroups && needed > 0; i++) {
- ret = ext4_mb_discard_group_preallocations(sb, i, needed);
+ ret = ext4_mb_discard_group_preallocations(sb, i, &busy);
freed += ret;
needed -= ret;
+ cond_resched();
+ }
+
+ if (needed > 0 && busy && ++retry < 3) {
+ busy = 0;
+ goto repeat;
}
return freed;
From: Chengguang Xu <[email protected]>
commit 8d1cfb884e881efd69a3be4ef10772c71cb22216 upstream.
There is a redundant ']' in the name of opcode IB_OPCODE_RC_SEND_MIDDLE,
so just fix it.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Chengguang Xu <[email protected]>
Acked-by: Zhu Yanjun <[email protected]>
Reviewed-by: Bob Pearson <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_opcode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/sw/rxe/rxe_opcode.c
+++ b/drivers/infiniband/sw/rxe/rxe_opcode.c
@@ -117,7 +117,7 @@ struct rxe_opcode_info rxe_opcode[RXE_NU
}
},
[IB_OPCODE_RC_SEND_MIDDLE] = {
- .name = "IB_OPCODE_RC_SEND_MIDDLE]",
+ .name = "IB_OPCODE_RC_SEND_MIDDLE",
.mask = RXE_PAYLOAD_MASK | RXE_REQ_MASK | RXE_SEND_MASK
| RXE_MIDDLE_MASK,
.length = RXE_BTH_BYTES,
From: Xin Yin <[email protected]>
commit 5e4d0eba1ccaf19f93222abdeda5a368be141785 upstream.
when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten,
which has been already initialized. If the range is align to blocksize,
fast commit will not track range for this change.
Also track range for unwritten range in ext4_map_blocks().
Signed-off-by: Xin Yin <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/extents.c | 2 --
fs/ext4/inode.c | 7 ++++---
2 files changed, 4 insertions(+), 5 deletions(-)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4645,8 +4645,6 @@ static long ext4_zero_range(struct file
ret = ext4_mark_inode_dirty(handle, inode);
if (unlikely(ret))
goto out_handle;
- ext4_fc_track_range(handle, inode, offset >> inode->i_sb->s_blocksize_bits,
- (offset + len - 1) >> inode->i_sb->s_blocksize_bits);
/* Zero out partial block at the edges of the range */
ret = ext4_zero_partial_blocks(handle, inode, offset, len);
if (ret >= 0)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -741,10 +741,11 @@ out_sem:
if (ret)
return ret;
}
- ext4_fc_track_range(handle, inode, map->m_lblk,
- map->m_lblk + map->m_len - 1);
}
-
+ if (retval > 0 && (map->m_flags & EXT4_MAP_UNWRITTEN ||
+ map->m_flags & EXT4_MAP_MAPPED))
+ ext4_fc_track_range(handle, inode, map->m_lblk,
+ map->m_lblk + map->m_len - 1);
if (retval < 0)
ext_debug(inode, "failed with err %d\n", retval);
return retval;
From: Johannes Berg <[email protected]>
commit fdfde0cb79264f88992e72b5a056a3a3284fcaad upstream.
Contrary to what was stated before, the hardware hasn't changed
the bits here yet. In any case, the new CSR is also directly
(lower 16 bits) connected to UREG_DOORBELL_TO_ISR6, so if it
still changes the changes would be there. Adjust the code and
comments accordingly.
Signed-off-by: Johannes Berg <[email protected]>
Fixes: 6c0795f1a524 ("iwlwifi: implement Bz NMI behaviour")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.75b6207536e3.I7d170a48a9096e6b7269c3a9f447c326f929b171@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-csr.h | 5 +++--
drivers/net/wireless/intel/iwlwifi/iwl-io.c | 2 +-
2 files changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
@@ -104,9 +104,10 @@
/* GIO Chicken Bits (PCI Express bus link power management) */
#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
-/* Doorbell NMI (since Bz) */
+/* Doorbell - since Bz
+ * connected to UREG_DOORBELL_TO_ISR6 (lower 16 bits only)
+ */
#define CSR_DOORBELL_VECTOR (CSR_BASE + 0x130)
-#define CSR_DOORBELL_VECTOR_NMI BIT(1)
/* host chicken bits */
#define CSR_HOST_CHICKEN (CSR_BASE + 0x204)
--- a/drivers/net/wireless/intel/iwlwifi/iwl-io.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-io.c
@@ -218,7 +218,7 @@ void iwl_force_nmi(struct iwl_trans *tra
UREG_DOORBELL_TO_ISR6_NMI_BIT);
else
iwl_write32(trans, CSR_DOORBELL_VECTOR,
- CSR_DOORBELL_VECTOR_NMI);
+ UREG_DOORBELL_TO_ISR6_NMI_BIT);
}
IWL_EXPORT_SYMBOL(iwl_force_nmi);
From: Moshe Shemesh <[email protected]>
commit 4f6626b0e140867fd6d5a2e9d4ceaef97f10f46a upstream.
This reverts commit 410bd754cd73c4a2ac3856d9a03d7b08f9c906bf.
The reverted commit had added a retry mechanism to the command entry
index allocation. The previous patch ensures that there is a free
command entry index once the command work handler holds the command
semaphore. Thus the retry mechanism is not needed.
Fixes: 410bd754cd73 ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 21 +--------------------
1 file changed, 1 insertion(+), 20 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -899,25 +899,6 @@ static bool opcode_allowed(struct mlx5_c
return cmd->allowed_opcode == opcode;
}
-static int cmd_alloc_index_retry(struct mlx5_cmd *cmd)
-{
- unsigned long alloc_end = jiffies + msecs_to_jiffies(1000);
- int idx;
-
-retry:
- idx = cmd_alloc_index(cmd);
- if (idx < 0 && time_before(jiffies, alloc_end)) {
- /* Index allocation can fail on heavy load of commands. This is a temporary
- * situation as the current command already holds the semaphore, meaning that
- * another command completion is being handled and it is expected to release
- * the entry index soon.
- */
- cpu_relax();
- goto retry;
- }
- return idx;
-}
-
bool mlx5_cmd_is_down(struct mlx5_core_dev *dev)
{
return pci_channel_offline(dev->pdev) ||
@@ -942,7 +923,7 @@ static void cmd_work_handler(struct work
sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
down(sem);
if (!ent->page_queue) {
- alloc_ret = cmd_alloc_index_retry(cmd);
+ alloc_ret = cmd_alloc_index(cmd);
if (alloc_ret < 0) {
mlx5_core_err_rl(dev, "failed to allocate command entry\n");
if (ent->callback) {
From: Vladimir Oltean <[email protected]>
commit 33cb0ff30cff104e753f7882c99e54cf67ea7903 upstream.
Since commit b39648079db4 ("net: mscc: ocelot: disable flow control on
NPI interface"), flow control should be disabled on the DSA CPU port
when used in NPI mode.
However, the commit blamed in the Fixes: tag below broke this, because
it allowed felix_phylink_mac_link_up() to overwrite SYS_PAUSE_CFG_PAUSE_ENA
for the DSA CPU port.
This issue became noticeable since the device tree update from commit
8fcea7be5736 ("arm64: dts: ls1028a: mark internal links between Felix
and ENETC as capable of flow control").
The solution is to check whether this is the currently configured NPI
port from ocelot_phylink_mac_link_up(), and to not modify the statically
disabled PAUSE frame transmission if it is.
When the port is configured for lossless mode as opposed to tail drop
mode, but the link partner (DSA master) doesn't observe the transmitted
PAUSE frames, the switch termination throughput is much worse, as can be
seen below.
Before:
root@debian:~# iperf3 -c 192.168.100.2
Connecting to host 192.168.100.2, port 5201
[ 5] local 192.168.100.1 port 37504 connected to 192.168.100.2 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 28.4 MBytes 238 Mbits/sec 357 22.6 KBytes
[ 5] 1.00-2.00 sec 33.6 MBytes 282 Mbits/sec 426 19.8 KBytes
[ 5] 2.00-3.00 sec 34.0 MBytes 285 Mbits/sec 343 21.2 KBytes
[ 5] 3.00-4.00 sec 32.9 MBytes 276 Mbits/sec 354 22.6 KBytes
[ 5] 4.00-5.00 sec 32.3 MBytes 271 Mbits/sec 297 18.4 KBytes
^C[ 5] 5.00-5.06 sec 2.05 MBytes 270 Mbits/sec 45 19.8 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-5.06 sec 163 MBytes 271 Mbits/sec 1822 sender
[ 5] 0.00-5.06 sec 0.00 Bytes 0.00 bits/sec receiver
After:
root@debian:~# iperf3 -c 192.168.100.2
Connecting to host 192.168.100.2, port 5201
[ 5] local 192.168.100.1 port 49470 connected to 192.168.100.2 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec 259 143 KBytes
[ 5] 1.00-2.00 sec 110 MBytes 920 Mbits/sec 329 144 KBytes
[ 5] 2.00-3.00 sec 112 MBytes 936 Mbits/sec 255 144 KBytes
[ 5] 3.00-4.00 sec 110 MBytes 927 Mbits/sec 355 105 KBytes
[ 5] 4.00-5.00 sec 110 MBytes 926 Mbits/sec 350 156 KBytes
[ 5] 5.00-6.00 sec 110 MBytes 925 Mbits/sec 305 148 KBytes
[ 5] 6.00-7.00 sec 110 MBytes 924 Mbits/sec 320 143 KBytes
[ 5] 7.00-8.00 sec 110 MBytes 925 Mbits/sec 273 97.6 KBytes
[ 5] 8.00-9.00 sec 109 MBytes 913 Mbits/sec 299 141 KBytes
[ 5] 9.00-10.00 sec 110 MBytes 922 Mbits/sec 287 146 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.08 GBytes 926 Mbits/sec 3032 sender
[ 5] 0.00-10.00 sec 1.08 GBytes 925 Mbits/sec receiver
Fixes: de274be32cb2 ("net: dsa: felix: set TX flow control according to the phylink_mac_link_up resolution")
Reported-by: Xiaoliang Yang <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -555,7 +555,10 @@ void ocelot_phylink_mac_link_up(struct o
ocelot_write_rix(ocelot, 0, ANA_POL_FLOWC, port);
- ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, tx_pause);
+ /* Don't attempt to send PAUSE frames on the NPI port, it's broken */
+ if (port != ocelot->npi)
+ ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA,
+ tx_pause);
/* Undo the effects of ocelot_phylink_mac_link_down:
* enable MAC module
From: Tobias Waldekranz <[email protected]>
commit 0d375d610fa96524e2ee2b46830a46a7bfa92a9f upstream.
This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.
Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
@@ -79,6 +79,7 @@ fman0: fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xfc000 0x1000>;
+ fsl,erratum-a009885;
};
xmdio0: mdio@fd000 {
@@ -86,6 +87,7 @@ fman0: fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xfd000 0x1000>;
+ fsl,erratum-a009885;
};
};
From: Jie Wang <[email protected]>
commit 4e5bd03ae34652cd932ab4c91c71c511793df75c upstream.
In Linux bonding scenario, one packet is copied to several copies and sent
by all slave device of bond0 in mode 3(broadcast mode). The mode 3 xmit
function bond_xmit_broadcast() only ueses the last slave device's tx result
as the final result. In this case, if the last slave device is down, then
it always return NET_XMIT_DROP, even though the other slave devices xmit
success. It may cause the tx statistics error, and cause the application
(e.g. scp) consider the network is unreachable.
For example, use the following command to configure server A.
echo 3 > /sys/class/net/bond0/bonding/mode
ifconfig bond0 up
ifenslave bond0 eth0 eth1
ifconfig bond0 192.168.1.125
ifconfig eth0 up
ifconfig eth1 down
The slave device eth0 and eth1 are connected to server B(192.168.1.107).
Run the ping 192.168.1.107 -c 3 -i 0.2 command, the following information
is displayed.
PING 192.168.1.107 (192.168.1.107) 56(84) bytes of data.
64 bytes from 192.168.1.107: icmp_seq=1 ttl=64 time=0.077 ms
64 bytes from 192.168.1.107: icmp_seq=2 ttl=64 time=0.056 ms
64 bytes from 192.168.1.107: icmp_seq=3 ttl=64 time=0.051 ms
192.168.1.107 ping statistics
0 packets transmitted, 3 received
Actually, the slave device eth0 of the bond successfully sends three
ICMP packets, but the result shows that 0 packets are transmitted.
Also if we use scp command to get remote files, the command end with the
following printings.
ssh_exchange_identification: read: Connection timed out
So this patch modifies the bond_xmit_broadcast to return NET_XMIT_SUCCESS
if one slave device in the bond sends packets successfully. If all slave
devices send packets fail, the discarded packets stats is increased. The
skb is released when there is no slave device in the bond or the last slave
device is down.
Fixes: ae46f184bc1f ("bonding: propagate transmit status")
Signed-off-by: Jie Wang <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_main.c | 30 ++++++++++++++++++++++--------
1 file changed, 22 insertions(+), 8 deletions(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4843,25 +4843,39 @@ static netdev_tx_t bond_xmit_broadcast(s
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave = NULL;
struct list_head *iter;
+ bool xmit_suc = false;
+ bool skb_used = false;
bond_for_each_slave_rcu(bond, slave, iter) {
- if (bond_is_last_slave(bond, slave))
- break;
- if (bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
- struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
+ struct sk_buff *skb2;
+ if (!(bond_slave_is_up(slave) && slave->link == BOND_LINK_UP))
+ continue;
+
+ if (bond_is_last_slave(bond, slave)) {
+ skb2 = skb;
+ skb_used = true;
+ } else {
+ skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
bond_dev->name, __func__);
continue;
}
- bond_dev_queue_xmit(bond, skb2, slave->dev);
}
+
+ if (bond_dev_queue_xmit(bond, skb2, slave->dev) == NETDEV_TX_OK)
+ xmit_suc = true;
}
- if (slave && bond_slave_is_up(slave) && slave->link == BOND_LINK_UP)
- return bond_dev_queue_xmit(bond, skb, slave->dev);
- return bond_tx_drop(bond_dev, skb);
+ if (!skb_used)
+ dev_kfree_skb_any(skb);
+
+ if (xmit_suc)
+ return NETDEV_TX_OK;
+
+ atomic_long_inc(&bond_dev->tx_dropped);
+ return NET_XMIT_DROP;
}
/*------------------------- Device initialization ---------------------------*/
From: James Smart <[email protected]>
commit 7576d48c64f36f6fea9df2882f710a474fa35f40 upstream.
Issuing lpfc_force_rscn twice results in an ndlp kref use-after-free call
trace.
A prior patch reworked the get/put handling by ensuring nlp_get was done
before WQE submission and a put was done in the completion path.
Unfortunately, the issue_els_rscn path had a piece of legacy code that did
a nlp_put, causing an imbalance on the ref counts.
Fixed by removing the unnecessary legacy code snippet.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4430f7fd09ec ("scsi: lpfc: Rework locations of ndlp reference taking")
Cc: <[email protected]> # v5.11+
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/lpfc/lpfc_els.c | 5 -----
1 file changed, 5 deletions(-)
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -3531,11 +3531,6 @@ lpfc_issue_els_rscn(struct lpfc_vport *v
return 1;
}
- /* This will cause the callback-function lpfc_cmpl_els_cmd to
- * trigger the release of node.
- */
- if (!(vport->fc_flag & FC_PT2PT))
- lpfc_nlp_put(ndlp);
return 0;
}
From: Sam Protsenko <[email protected]>
commit 33950f9a36aca55c2b1e6062d9b29f3e97f91c40 upstream.
Exynos7 watchdog driver is clearly indicating that its dts node must
define syscon phandle property. That was probably forgotten, so add it.
Signed-off-by: Sam Protsenko <[email protected]>
Fixes: 2b9366b66967 ("watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7")
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -39,8 +39,8 @@ properties:
samsung,syscon-phandle:
$ref: /schemas/types.yaml#/definitions/phandle
description:
- Phandle to the PMU system controller node (in case of Exynos5250
- and Exynos5420).
+ Phandle to the PMU system controller node (in case of Exynos5250,
+ Exynos5420 and Exynos7).
required:
- compatible
@@ -58,6 +58,7 @@ allOf:
enum:
- samsung,exynos5250-wdt
- samsung,exynos5420-wdt
+ - samsung,exynos7-wdt
then:
required:
- samsung,syscon-phandle
From: Pali Rohár <[email protected]>
commit 1c1a3b4d3e86b997a313ffb297c1129540882859 upstream.
If expansion ROM is unsupported (which is the case of pci-bridge-emul.c
driver) then ROM Base Address register must be implemented as read-only
register that return 0 when read, same as for unused Base Address
registers.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -139,8 +139,13 @@ struct pci_bridge_reg_behavior pci_regs_
.ro = GENMASK(7, 0),
},
+ /*
+ * If expansion ROM is unsupported then ROM Base Address register must
+ * be implemented as read-only register that return 0 when read, same
+ * as for unused Base Address registers.
+ */
[PCI_ROM_ADDRESS1 / 4] = {
- .rw = GENMASK(31, 11) | BIT(0),
+ .ro = ~0,
},
/*
From: Alistair Popple <[email protected]>
commit 87c01d57fa23de82fff593a7d070933d08755801 upstream.
hmm_range_fault() can be used instead of get_user_pages() for devices
which allow faulting however unlike get_user_pages() it will return an
error when used on a VM_MIXEDMAP range.
To make hmm_range_fault() more closely match get_user_pages() remove
this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL
case in hmm_vma_handle_pte(). Rather than replicating the logic of
vm_normal_page() call it directly and do a check for the zero pfn
similar to what get_user_pages() currently does.
Also add a test to hmm selftest to verify functionality.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: da4c3c735ea4 ("mm/hmm/mirror: helper to snapshot CPU page table")
Signed-off-by: Alistair Popple <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Zi Yan <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Felix Kuehling <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/test_hmm.c | 24 ++++++++++++++++++
mm/hmm.c | 5 ++-
tools/testing/selftests/vm/hmm-tests.c | 42 +++++++++++++++++++++++++++++++++
3 files changed, 69 insertions(+), 2 deletions(-)
--- a/lib/test_hmm.c
+++ b/lib/test_hmm.c
@@ -1087,9 +1087,33 @@ static long dmirror_fops_unlocked_ioctl(
return 0;
}
+static int dmirror_fops_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ unsigned long addr;
+
+ for (addr = vma->vm_start; addr < vma->vm_end; addr += PAGE_SIZE) {
+ struct page *page;
+ int ret;
+
+ page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ if (!page)
+ return -ENOMEM;
+
+ ret = vm_insert_page(vma, addr, page);
+ if (ret) {
+ __free_page(page);
+ return ret;
+ }
+ put_page(page);
+ }
+
+ return 0;
+}
+
static const struct file_operations dmirror_fops = {
.open = dmirror_fops_open,
.release = dmirror_fops_release,
+ .mmap = dmirror_fops_mmap,
.unlocked_ioctl = dmirror_fops_unlocked_ioctl,
.llseek = default_llseek,
.owner = THIS_MODULE,
--- a/mm/hmm.c
+++ b/mm/hmm.c
@@ -300,7 +300,8 @@ static int hmm_vma_handle_pte(struct mm_
* Since each architecture defines a struct page for the zero page, just
* fall through and treat it like a normal page.
*/
- if (pte_special(pte) && !pte_devmap(pte) &&
+ if (!vm_normal_page(walk->vma, addr, pte) &&
+ !pte_devmap(pte) &&
!is_zero_pfn(pte_pfn(pte))) {
if (hmm_pte_need_fault(hmm_vma_walk, pfn_req_flags, 0)) {
pte_unmap(ptep);
@@ -518,7 +519,7 @@ static int hmm_vma_walk_test(unsigned lo
struct hmm_range *range = hmm_vma_walk->range;
struct vm_area_struct *vma = walk->vma;
- if (!(vma->vm_flags & (VM_IO | VM_PFNMAP | VM_MIXEDMAP)) &&
+ if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)) &&
vma->vm_flags & VM_READ)
return 0;
--- a/tools/testing/selftests/vm/hmm-tests.c
+++ b/tools/testing/selftests/vm/hmm-tests.c
@@ -1251,6 +1251,48 @@ TEST_F(hmm, anon_teardown)
/*
* Test memory snapshot without faulting in pages accessed by the device.
*/
+TEST_F(hmm, mixedmap)
+{
+ struct hmm_buffer *buffer;
+ unsigned long npages;
+ unsigned long size;
+ unsigned char *m;
+ int ret;
+
+ npages = 1;
+ size = npages << self->page_shift;
+
+ buffer = malloc(sizeof(*buffer));
+ ASSERT_NE(buffer, NULL);
+
+ buffer->fd = -1;
+ buffer->size = size;
+ buffer->mirror = malloc(npages);
+ ASSERT_NE(buffer->mirror, NULL);
+
+
+ /* Reserve a range of addresses. */
+ buffer->ptr = mmap(NULL, size,
+ PROT_READ | PROT_WRITE,
+ MAP_PRIVATE,
+ self->fd, 0);
+ ASSERT_NE(buffer->ptr, MAP_FAILED);
+
+ /* Simulate a device snapshotting CPU pagetables. */
+ ret = hmm_dmirror_cmd(self->fd, HMM_DMIRROR_SNAPSHOT, buffer, npages);
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(buffer->cpages, npages);
+
+ /* Check what the device saw. */
+ m = buffer->mirror;
+ ASSERT_EQ(m[0], HMM_DMIRROR_PROT_READ);
+
+ hmm_buffer_free(buffer);
+}
+
+/*
+ * Test memory snapshot without faulting in pages accessed by the device.
+ */
TEST_F(hmm2, snapshot)
{
struct hmm_buffer *buffer;
From: Sebastian Andrzej Siewior <[email protected]>
commit ab047d516dea72f011c15c04a929851e4d053109 upstream.
The kmemcache for ext4_fc_dentry_cachep remains registered after module
removal.
Destroy ext4_fc_dentry_cachep kmemcache on module removal.
Fixes: aa75f4d3daaeb ("ext4: main fast-commit commit path")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Lukas Czerner <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/ext4.h | 1 +
fs/ext4/fast_commit.c | 5 +++++
fs/ext4/super.c | 2 ++
3 files changed, 8 insertions(+)
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -2934,6 +2934,7 @@ bool ext4_fc_replay_check_excluded(struc
void ext4_fc_replay_cleanup(struct super_block *sb);
int ext4_fc_commit(journal_t *journal, tid_t commit_tid);
int __init ext4_fc_init_dentry_cache(void);
+void ext4_fc_destroy_dentry_cache(void);
/* mballoc.c */
extern const struct seq_operations ext4_mb_seq_groups_ops;
--- a/fs/ext4/fast_commit.c
+++ b/fs/ext4/fast_commit.c
@@ -2188,3 +2188,8 @@ int __init ext4_fc_init_dentry_cache(voi
return 0;
}
+
+void ext4_fc_destroy_dentry_cache(void)
+{
+ kmem_cache_destroy(ext4_fc_dentry_cachep);
+}
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6653,6 +6653,7 @@ static int __init ext4_init_fs(void)
out:
unregister_as_ext2();
unregister_as_ext3();
+ ext4_fc_destroy_dentry_cache();
out05:
destroy_inodecache();
out1:
@@ -6679,6 +6680,7 @@ static void __exit ext4_exit_fs(void)
unregister_as_ext2();
unregister_as_ext3();
unregister_filesystem(&ext4_fs_type);
+ ext4_fc_destroy_dentry_cache();
destroy_inodecache();
ext4_exit_mballoc();
ext4_exit_sysfs();
From: Alex Elder <[email protected]>
commit 6c0e3b5ce94947b311348c367db9e11dcb2ccc93 upstream.
In ipa_endpoint_replenish(), if an error occurs when attempting to
replenish a receive buffer, we just quit and try again later. In
that case we increment the backlog count to reflect that the attempt
was unsuccessful. Then, if the add_one flag was true we increment
the backlog again.
This second increment is not included in the backlog local variable
though, and its value determines whether delayed work should be
scheduled. This is a bug.
Fix this by determining whether 1 or 2 should be added to the
backlog before adding it in a atomic_add_return() call.
Reviewed-by: Matthias Kaehlcke <[email protected]>
Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ipa/ipa_endpoint.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/net/ipa/ipa_endpoint.c
+++ b/drivers/net/ipa/ipa_endpoint.c
@@ -1067,6 +1067,7 @@ static void ipa_endpoint_replenish(struc
{
struct gsi *gsi;
u32 backlog;
+ int delta;
if (!endpoint->replenish_enabled) {
if (add_one)
@@ -1084,10 +1085,8 @@ static void ipa_endpoint_replenish(struc
try_again_later:
/* The last one didn't succeed, so fix the backlog */
- backlog = atomic_inc_return(&endpoint->replenish_backlog);
-
- if (add_one)
- atomic_inc(&endpoint->replenish_backlog);
+ delta = add_one ? 2 : 1;
+ backlog = atomic_add_return(delta, &endpoint->replenish_backlog);
/* Whenever a receive buffer transaction completes we'll try to
* replenish again. It's unlikely, but if we fail to supply even
From: Moshe Tal <[email protected]>
commit 429e3d123d9a50cc9882402e40e0ac912d88cfcf upstream.
Wrong hash sends single stream to multiple output interfaces.
The offset calculation was relative to skb->head, fix it to be relative
to skb->data.
Fixes: a815bde56b15 ("net, bonding: Refactor bond_xmit_hash for use with
xdp_buff")
Reviewed-by: Jussi Maki <[email protected]>
Reviewed-by: Saeed Mahameed <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Moshe Tal <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3872,8 +3872,8 @@ u32 bond_xmit_hash(struct bonding *bond,
skb->l4_hash)
return skb->hash;
- return __bond_xmit_hash(bond, skb, skb->head, skb->protocol,
- skb->mac_header, skb->network_header,
+ return __bond_xmit_hash(bond, skb, skb->data, skb->protocol,
+ skb_mac_offset(skb), skb_network_offset(skb),
skb_headlen(skb));
}
From: Rajneesh Bhardwaj <[email protected]>
commit 8b5da5a458c95ad49571a6a6285800bf13409616 upstream.
This reverts commit fbcdbfde87509d523132b59f661a355c731139d0.
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
@@ -264,9 +264,6 @@ static int amdgpu_gem_object_mmap(struct
!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
vma->vm_flags &= ~VM_MAYWRITE;
- if (bo->kfd_bo)
- vma->vm_flags |= VM_DONTCOPY;
-
return drm_gem_ttm_mmap(obj, vma);
}
From: Kevin Bracey <[email protected]>
commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.
commit 56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and "mpu X" attributes.
"overhead X" and "linklayer atm" have already been fixed. This restores
the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping:
tc class add ... htb rate X overhead 4 mpu 64
The code being fixed is used by htb, tbf and act_police. Cake has its
own mpu handling. qdisc_calculate_pkt_len still uses the size table
containing values adjusted for mpu by user space.
iproute2 tc has always passed mpu into the kernel via a tc_ratespec
structure, but the kernel never directly acted on it, merely stored it
so that it could be read back by `tc class show`.
Rather, tc would generate length-to-time tables that included the mpu
(and linklayer) in their construction, and the kernel used those tables.
Since v3.7, the tables were no longer used. Along with "mpu", this also
broke "overhead" and "linklayer" which were fixed in 01cb71d2d47b
("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84b171
("net_sched: restore "linklayer atm" handling", v3.11).
"overhead" was fixed by simply restoring use of tc_ratespec::overhead -
this had originally been used by the kernel but was initially omitted
from the new non-table-based calculations.
"linklayer" had been handled in the table like "mpu", but the mode was
not originally passed in tc_ratespec. The new implementation was made to
handle it by getting new versions of tc to pass the mode in an extended
tc_ratespec, and for older versions of tc the table contents were analysed
at load time to deduce linklayer.
As "mpu" has always been given to the kernel in tc_ratespec,
accompanying the mpu-based table, we can restore system functionality
with no userspace change by making the kernel act on the tc_ratespec
value.
Fixes: 56b765b79e9a ("htb: improved accuracy at high rates")
Signed-off-by: Kevin Bracey <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: Vimalkumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sch_generic.h | 5 +++++
net/sched/sch_generic.c | 1 +
2 files changed, 6 insertions(+)
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -1260,6 +1260,7 @@ struct psched_ratecfg {
u64 rate_bytes_ps; /* bytes per second */
u32 mult;
u16 overhead;
+ u16 mpu;
u8 linklayer;
u8 shift;
};
@@ -1269,6 +1270,9 @@ static inline u64 psched_l2t_ns(const st
{
len += r->overhead;
+ if (len < r->mpu)
+ len = r->mpu;
+
if (unlikely(r->linklayer == TC_LINKLAYER_ATM))
return ((u64)(DIV_ROUND_UP(len,48)*53) * r->mult) >> r->shift;
@@ -1291,6 +1295,7 @@ static inline void psched_ratecfg_getrat
res->rate = min_t(u64, r->rate_bytes_ps, ~0U);
res->overhead = r->overhead;
+ res->mpu = r->mpu;
res->linklayer = (r->linklayer & TC_LINKLAYER_MASK);
}
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -1455,6 +1455,7 @@ void psched_ratecfg_precompute(struct ps
{
memset(r, 0, sizeof(*r));
r->overhead = conf->overhead;
+ r->mpu = conf->mpu;
r->rate_bytes_ps = max_t(u64, conf->rate, rate64);
r->linklayer = (conf->linklayer & TC_LINKLAYER_MASK);
psched_ratecfg_precompute__(r->rate_bytes_ps, &r->mult, &r->shift);
From: Ghalem Boudour <[email protected]>
commit bcf141b2eb551b3477b24997ebc09c65f117a803 upstream.
On egress side, xfrm lookup is called from __gre6_xmit() with the
fl6_gre_key field not initialized leading to policies selectors check
failure. Consequently, gre packets are sent without encryption.
On ingress side, INET6_PROTO_NOPOLICY was set, thus packets were not
checked against xfrm policies. Like for egress side, fl6_gre_key should be
correctly set, this is now done in decode_session6().
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Cc: [email protected]
Signed-off-by: Ghalem Boudour <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_gre.c | 5 ++++-
net/xfrm/xfrm_policy.c | 21 +++++++++++++++++++++
2 files changed, 25 insertions(+), 1 deletion(-)
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -755,6 +755,7 @@ static netdev_tx_t __gre6_xmit(struct sk
fl6->daddr = key->u.ipv6.dst;
fl6->flowlabel = key->label;
fl6->flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ fl6->fl6_gre_key = tunnel_id_to_key32(key->tun_id);
dsfield = key->tos;
flags = key->tun_flags &
@@ -990,6 +991,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit
fl6.daddr = key->u.ipv6.dst;
fl6.flowlabel = key->label;
fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ fl6.fl6_gre_key = tunnel_id_to_key32(key->tun_id);
dsfield = key->tos;
if (!(tun_info->key.tun_flags & TUNNEL_ERSPAN_OPT))
@@ -1098,6 +1100,7 @@ static void ip6gre_tnl_link_config_commo
fl6->flowi6_oif = p->link;
fl6->flowlabel = 0;
fl6->flowi6_proto = IPPROTO_GRE;
+ fl6->fl6_gre_key = t->parms.o_key;
if (!(p->flags&IP6_TNL_F_USE_ORIG_TCLASS))
fl6->flowlabel |= IPV6_TCLASS_MASK & p->flowinfo;
@@ -1544,7 +1547,7 @@ static void ip6gre_fb_tunnel_init(struct
static struct inet6_protocol ip6gre_protocol __read_mostly = {
.handler = gre_rcv,
.err_handler = ip6gre_err,
- .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
+ .flags = INET6_PROTO_FINAL,
};
static void ip6gre_destroy_tunnels(struct net *net, struct list_head *head)
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -33,6 +33,7 @@
#include <net/flow.h>
#include <net/xfrm.h>
#include <net/ip.h>
+#include <net/gre.h>
#if IS_ENABLED(CONFIG_IPV6_MIP6)
#include <net/mip6.h>
#endif
@@ -3424,6 +3425,26 @@ decode_session6(struct sk_buff *skb, str
}
fl6->flowi6_proto = nexthdr;
return;
+ case IPPROTO_GRE:
+ if (!onlyproto &&
+ (nh + offset + 12 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 12 - skb->data))) {
+ struct gre_base_hdr *gre_hdr;
+ __be32 *gre_key;
+
+ nh = skb_network_header(skb);
+ gre_hdr = (struct gre_base_hdr *)(nh + offset);
+ gre_key = (__be32 *)(gre_hdr + 1);
+
+ if (gre_hdr->flags & GRE_KEY) {
+ if (gre_hdr->flags & GRE_CSUM)
+ gre_key++;
+ fl6->fl6_gre_key = *gre_key;
+ }
+ }
+ fl6->flowi6_proto = nexthdr;
+ return;
+
#if IS_ENABLED(CONFIG_IPV6_MIP6)
case IPPROTO_MH:
offset += ipv6_optlen(exthdr);
From: Christophe JAILLET <[email protected]>
commit 4da96175014be67c846fd274eace08066e525d75 upstream.
'priv->workqueue' is destroyed in the error handling path of the probe but
not in the remove function.
Add the missing call to release some resources.
Cc: stable <[email protected]>
Fixes: 2df7062002d0 ("remoteproc: imx_proc: enable virtio/mailbox")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Tested-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/d28ca94a4031bd7297d47c2164e18885a5a6ec19.1634366546.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/remoteproc/imx_rproc.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -830,6 +830,7 @@ static int imx_rproc_remove(struct platf
clk_disable_unprepare(priv->clk);
rproc_del(rproc);
imx_rproc_free_mbox(rproc);
+ destroy_workqueue(priv->workqueue);
rproc_free(rproc);
return 0;
From: Brian Norris <[email protected]>
commit c4c6ef229593366ab593d4d424addc7025b54a76 upstream.
Prior to commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"),
"PSR exit" used non-blocking analogix_dp_send_psr_spd(). The refactor
started using the blocking variant, for a variety of reasons -- quoting
Sean Paul's potentially-faulty memory:
"""
- To avoid racing a subsequent PSR entry (if exit takes a long time)
- To avoid racing disable/modeset
- We're not displaying new content while exiting PSR anyways, so there
is minimal utility in allowing frames to be submitted
- We're lying to userspace telling them frames are on the screen when
we're just dropping them on the floor
"""
However, I'm finding that this blocking transition is causing upwards of
60+ ms of unneeded latency on PSR-exit, to the point that initial cursor
movements when leaving PSR are unbearably jumpy.
It turns out that we need to meet in the middle somewhere: Sean is right
that we were "lying to userspace" with a non-blocking PSR-exit, but the
new blocking behavior is also waiting too long:
According to the eDP specification, the sink device must support PSR
entry transitions from both state 4 (ACTIVE_RESYNC) and state 0
(INACTIVE). It also states that in ACTIVE_RESYNC, "the Sink device must
display the incoming active frames from the Source device with no
visible glitches and/or artifacts."
Thus, for our purposes, we only need to wait for ACTIVE_RESYNC before
moving on; we are ready to display video, and subsequent PSR-entry is
safe.
Tested on a Samsung Chromebook Plus (i.e., Rockchip RK3399 Gru Kevin),
where this saves about 60ms of latency, for PSR-exit that used to
take about 80ms.
Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Cc: <[email protected]>
Cc: Zain Wang <[email protected]>
Cc: Tomasz Figa <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Sean Paul <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103135112.v3.1.I67612ea073c3306c71b46a87be894f79707082df@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -998,11 +998,21 @@ int analogix_dp_send_psr_spd(struct anal
if (!blocking)
return 0;
+ /*
+ * db[1]!=0: entering PSR, wait for fully active remote frame buffer.
+ * db[1]==0: exiting PSR, wait for either
+ * (a) ACTIVE_RESYNC - the sink "must display the
+ * incoming active frames from the Source device with no visible
+ * glitches and/or artifacts", even though timings may still be
+ * re-synchronizing; or
+ * (b) INACTIVE - the transition is fully complete.
+ */
ret = readx_poll_timeout(analogix_dp_get_psr_status, dp, psr_status,
psr_status >= 0 &&
((vsc->db[1] && psr_status == DP_PSR_SINK_ACTIVE_RFB) ||
- (!vsc->db[1] && psr_status == DP_PSR_SINK_INACTIVE)), 1500,
- DP_TIMEOUT_PSR_LOOP_MS * 1000);
+ (!vsc->db[1] && (psr_status == DP_PSR_SINK_ACTIVE_RESYNC ||
+ psr_status == DP_PSR_SINK_INACTIVE))),
+ 1500, DP_TIMEOUT_PSR_LOOP_MS * 1000);
if (ret) {
dev_warn(dp->dev, "Failed to apply PSR %d\n", ret);
return ret;
From: Miroslav Lichvar <[email protected]>
commit 2a4d75bfe41232608f5596a6d1369f92ccb20817 upstream.
Don't forget to release the device in sock_timestamping_bind_phc() after
it was used to get the vclock indices.
Fixes: d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Miroslav Lichvar <[email protected]>
Cc: Yangbo Lu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/sock.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -830,6 +830,8 @@ static int sock_timestamping_bind_phc(st
}
num = ethtool_get_phc_vclocks(dev, &vclock_index);
+ dev_put(dev);
+
for (i = 0; i < num; i++) {
if (*(vclock_index + i) == phc_index) {
match = true;
From: Filipe Manana <[email protected]>
commit c2f822635df873c510bda6fb7fd1b10b7c31be2d upstream.
If we extended the size of a swapfile after its header was created (by the
mkswap utility) and then try to activate it, we will map the entire file
when activating the swap file, instead of limiting to the max size defined
in the swap file's header.
Currently test case generic/643 from fstests fails because we do not
respect that size limit defined in the swap file's header.
So fix this by not mapping file ranges beyond the max size defined in the
swap header.
This is the same type of bug that iomap used to have, and was fixed in
commit 36ca7943ac18ae ("mm/swap: consider max pages in
iomap_swapfile_add_extent").
Fixes: ed46ff3d423780 ("Btrfs: support swap files")
CC: [email protected] # 5.4+
Reviewed-and-tested-by: Josef Bacik <[email protected]
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -10586,9 +10586,19 @@ static int btrfs_add_swap_extent(struct
struct btrfs_swap_info *bsi)
{
unsigned long nr_pages;
+ unsigned long max_pages;
u64 first_ppage, first_ppage_reported, next_ppage;
int ret;
+ /*
+ * Our swapfile may have had its size extended after the swap header was
+ * written. In that case activating the swapfile should not go beyond
+ * the max size set in the swap header.
+ */
+ if (bsi->nr_pages >= sis->max)
+ return 0;
+
+ max_pages = sis->max - bsi->nr_pages;
first_ppage = ALIGN(bsi->block_start, PAGE_SIZE) >> PAGE_SHIFT;
next_ppage = ALIGN_DOWN(bsi->block_start + bsi->block_len,
PAGE_SIZE) >> PAGE_SHIFT;
@@ -10596,6 +10606,7 @@ static int btrfs_add_swap_extent(struct
if (first_ppage >= next_ppage)
return 0;
nr_pages = next_ppage - first_ppage;
+ nr_pages = min(nr_pages, max_pages);
first_ppage_reported = first_ppage;
if (bsi->start == 0)
From: Quentin Monnet <[email protected]>
commit 48f5aef4c458c19ab337eed8c95a6486cc014aa3 upstream.
Bpftool's Makefile, and the Makefile for its documentation, both include
scripts/utilities.mak, but they use none of the items defined in this
file. Remove the includes.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/bpf/bpftool/Documentation/Makefile | 1 -
tools/bpf/bpftool/Makefile | 1 -
2 files changed, 2 deletions(-)
--- a/tools/bpf/bpftool/Documentation/Makefile
+++ b/tools/bpf/bpftool/Documentation/Makefile
@@ -1,6 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
include ../../../scripts/Makefile.include
-include ../../../scripts/utilities.mak
INSTALL ?= install
RM ?= rm -f
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -1,6 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
include ../../scripts/Makefile.include
-include ../../scripts/utilities.mak
ifeq ($(srctree),)
srctree := $(patsubst %/,%,$(dir $(CURDIR)))
From: Alexander Stein <[email protected]>
commit 640f35b871d29cd685ce0ea0762636381beeb98a upstream.
This property was already mentioned in the old textual bindings
amlogic,meson-vpu.txt, but got dropped during conversion.
Adding it back similar to amlogic,gx-vdec.yaml.
Fixes: 6b9ebf1e0e67 ("dt-bindings: display: amlogic, meson-vpu: convert to yaml")
Signed-off-by: Alexander Stein <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml | 6 ++++++
1 file changed, 6 insertions(+)
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
interrupts:
maxItems: 1
+ amlogic,canvas:
+ description: should point to a canvas provider node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
power-domains:
maxItems: 1
description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
- port@1
- "#address-cells"
- "#size-cells"
+ - amlogic,canvas
additionalProperties: false
@@ -118,6 +123,7 @@ examples:
interrupts = <3>;
#address-cells = <1>;
#size-cells = <0>;
+ amlogic,canvas = <&canvas>;
/* CVBS VDAC output port */
port@0 {
From: Robert Hancock <[email protected]>
commit 2d19c3fd80178160dd505ccd7fed1643831227a5 upstream.
With previous changes to make the driver handle the TX ring size more
correctly, the default TX ring size of 64 appears to significantly
bottleneck TX performance to around 600 Mbps on a 1 Gbps link on ZynqMP.
Increasing this to 128 seems to bring performance up to near line rate and
shouldn't cause excess bufferbloat (this driver doesn't yet support modern
byte-based queue management).
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -41,7 +41,7 @@
#include "xilinx_axienet.h"
/* Descriptors defines for Tx and Rx DMA */
-#define TX_BD_NUM_DEFAULT 64
+#define TX_BD_NUM_DEFAULT 128
#define RX_BD_NUM_DEFAULT 1024
#define TX_BD_NUM_MIN (MAX_SKB_FRAGS + 1)
#define TX_BD_NUM_MAX 4096
From: Dmitry Torokhov <[email protected]>
commit 3fe6acd4dc922237b30e55473c9349c6ce0690f3 upstream.
Unfortunately details of USB HID transport bled into HID core and
handling of numbered/unnumbered reports is quite a mess, with
hid_report_len() calculating the length according to USB rules,
and hid_hw_raw_request() adding report ID to the buffer for both
numbered and unnumbered reports.
Untangling it all requres a lot of changes in HID, so for now let's
handle this in the driver.
[[email protected]: microoptimize field->report->id to report->id]
Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <[email protected]>
Tested-by: Stephen Boyd <[email protected]> # CoachZ
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-vivaldi.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
--- a/drivers/hid/hid-vivaldi.c
+++ b/drivers/hid/hid-vivaldi.c
@@ -74,10 +74,11 @@ static void vivaldi_feature_mapping(stru
struct hid_usage *usage)
{
struct vivaldi_data *drvdata = hid_get_drvdata(hdev);
+ struct hid_report *report = field->report;
int fn_key;
int ret;
u32 report_len;
- u8 *buf;
+ u8 *report_data, *buf;
if (field->logical != HID_USAGE_FN_ROW_PHYSMAP ||
(usage->hid & HID_USAGE_PAGE) != HID_UP_ORDINAL)
@@ -89,12 +90,24 @@ static void vivaldi_feature_mapping(stru
if (fn_key > drvdata->max_function_row_key)
drvdata->max_function_row_key = fn_key;
- buf = hid_alloc_report_buf(field->report, GFP_KERNEL);
- if (!buf)
+ report_data = buf = hid_alloc_report_buf(report, GFP_KERNEL);
+ if (!report_data)
return;
- report_len = hid_report_len(field->report);
- ret = hid_hw_raw_request(hdev, field->report->id, buf,
+ report_len = hid_report_len(report);
+ if (!report->id) {
+ /*
+ * hid_hw_raw_request() will stuff report ID (which will be 0)
+ * into the first byte of the buffer even for unnumbered
+ * reports, so we need to account for this to avoid getting
+ * -EOVERFLOW in return.
+ * Note that hid_alloc_report_buf() adds 7 bytes to the size
+ * so we can safely say that we have space for an extra byte.
+ */
+ report_len++;
+ }
+
+ ret = hid_hw_raw_request(hdev, report->id, report_data,
report_len, HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
if (ret < 0) {
@@ -103,7 +116,16 @@ static void vivaldi_feature_mapping(stru
goto out;
}
- ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, buf,
+ if (!report->id) {
+ /*
+ * Undo the damage from hid_hw_raw_request() for unnumbered
+ * reports.
+ */
+ report_data++;
+ report_len--;
+ }
+
+ ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, report_data,
report_len, 0);
if (ret) {
dev_warn(&hdev->dev, "failed to report feature %d\n",
From: Laurence de Bruxelles <[email protected]>
commit 34127b3632b21e5c391756e724b1198eb9917981 upstream.
With the latest stable kernel versions the rtc on the PXA based
Zaurus does not work, when booting I see the following kernel messages:
pxa-rtc pxa-rtc: failed to find rtc clock source
pxa-rtc pxa-rtc: Unable to init SA1100 RTC sub-device
pxa-rtc: probe of pxa-rtc failed with error -2
hctosys: unable to open rtc device (rtc0)
I think this is because commit f2997775b111 ("rtc: sa1100: fix possible
race condition") moved the allocation of the rtc_device struct out of
sa1100_rtc_init and into sa1100_rtc_probe. This means that pxa_rtc_probe
also needs to do allocation for the rtc_device struct, otherwise
sa1100_rtc_init will try to dereference a null pointer. This patch adds
that allocation by copying how sa1100_rtc_probe in
drivers/rtc/rtc-sa1100.c does it; after the IRQs are set up a managed
rtc_device is allocated.
I've tested this patch with `qemu-system-arm -machine akita` and with a
real Zaurus SL-C1000 applied to 4.19, 5.4, and 5.10.
Signed-off-by: Laurence de Bruxelles <[email protected]>
Fixes: f2997775b111 ("rtc: sa1100: fix possible race condition")
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-pxa.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -330,6 +330,10 @@ static int __init pxa_rtc_probe(struct p
if (sa1100_rtc->irq_alarm < 0)
return -ENXIO;
+ sa1100_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(sa1100_rtc->rtc))
+ return PTR_ERR(sa1100_rtc->rtc);
+
pxa_rtc->base = devm_ioremap(dev, pxa_rtc->ress->start,
resource_size(pxa_rtc->ress));
if (!pxa_rtc->base) {
From: Lukas Wunner <[email protected]>
commit d3b3404df318504ec084213ab1065b73f49b0f1d upstream.
Commit a6845e1e1b78 ("serial: core: Consider rs485 settings to drive
RTS") sought to deassert RTS when opening an rs485-enabled uart port.
That way, the transceiver does not occupy the bus until it transmits
data.
Unfortunately, the commit mixed up the logic and *asserted* RTS instead
of *deasserting* it:
The commit amended uart_port_dtr_rts(), which raises DTR and RTS when
opening an rs232 port. "Raising" actually means lowering the signal
that's coming out of the uart, because an rs232 transceiver not only
changes a signal's voltage level, it also *inverts* the signal. See
the simplified schematic in the MAX232 datasheet for an example:
https://www.ti.com/lit/ds/symlink/max232.pdf
So, to raise RTS on an rs232 port, TIOCM_RTS is *set* in port->mctrl
and that results in the signal being driven low.
In contrast to rs232, the signal level for rs485 Transmit Enable is the
identity, not the inversion: If the transceiver expects a "high" RTS
signal for Transmit Enable, the signal coming out of the uart must also
be high, so TIOCM_RTS must be *cleared* in port->mctrl.
The commit did the exact opposite, but it's easy to see why given the
confusing semantics of rs232 and rs485. Fix it.
Fixes: a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS")
Cc: [email protected] # v4.14+
Cc: Rafael Gago Castano <[email protected]>
Cc: Jan Kiszka <[email protected]>
Cc: Su Bao Cheng <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Link: https://lore.kernel.org/r/9395767847833f2f3193c49cde38501eeb3b5669.1639821059.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/serial_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -162,7 +162,7 @@ static void uart_port_dtr_rts(struct uar
int RTS_after_send = !!(uport->rs485.flags & SER_RS485_RTS_AFTER_SEND);
if (raise) {
- if (rs485_on && !RTS_after_send) {
+ if (rs485_on && RTS_after_send) {
uart_set_mctrl(uport, TIOCM_DTR);
uart_clear_mctrl(uport, TIOCM_RTS);
} else {
@@ -171,7 +171,7 @@ static void uart_port_dtr_rts(struct uar
} else {
unsigned int clear = TIOCM_DTR;
- clear |= (!rs485_on || !RTS_after_send) ? TIOCM_RTS : 0;
+ clear |= (!rs485_on || RTS_after_send) ? TIOCM_RTS : 0;
uart_clear_mctrl(uport, clear);
}
}
From: Matthias Schiffer <[email protected]>
commit d8adf5b92a9d2205620874d498c39923ecea8749 upstream.
dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but
this has never worked: The /proc/self/fds/... paths passed by the shell
will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts,
but even with this check removed, the function cannot work: hexdump will
eat up the DTB magic, making the subsequent dtc call fail, as a pipe
cannot be rewound.
Simply remove this broken example, as there is already an alternative one
that works fine.
Fixes: 10eadc253ddf ("dtc: create tool to diff device trees")
Signed-off-by: Matthias Schiffer <[email protected]>
Reviewed-by: Frank Rowand <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/dtc/dtx_diff | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/scripts/dtc/dtx_diff
+++ b/scripts/dtc/dtx_diff
@@ -59,12 +59,8 @@ Otherwise DTx is treated as a dts source
or '/include/' to be processed.
If DTx_1 and DTx_2 are in different architectures, then this script
- may not work since \${ARCH} is part of the include path. Two possible
- workarounds:
-
- `basename $0` \\
- <(ARCH=arch_of_dtx_1 `basename $0` DTx_1) \\
- <(ARCH=arch_of_dtx_2 `basename $0` DTx_2)
+ may not work since \${ARCH} is part of the include path. The following
+ workaround can be used:
`basename $0` ARCH=arch_of_dtx_1 DTx_1 >tmp_dtx_1.dts
`basename $0` ARCH=arch_of_dtx_2 DTx_2 >tmp_dtx_2.dts
From: Alexander Stein <[email protected]>
commit 22bf4047d26980807611b7e2030803db375afd87 upstream.
This is used in meson-gx and meson-g12. Add the property to the binding.
This fixes the dtschema warning:
hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the
regexes: 'pinctrl-[0-9]+'
Signed-off-by: Alexander Stein <[email protected]>
Fixes: 376bf52deef5 ("dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml")
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml | 5 +++++
1 file changed, 5 insertions(+)
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to th
maintainers:
- Neil Armstrong <[email protected]>
+allOf:
+ - $ref: /schemas/sound/name-prefix.yaml#
+
description: |
The Amlogic Meson Synopsys Designware Integration is composed of
- A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
"#sound-dai-cells":
const: 0
+ sound-name-prefix: true
+
required:
- compatible
- reg
From: Robert Hancock <[email protected]>
commit 996defd7f8b5dafc1d480b7585c7c62437f80c3c upstream.
The check for whether a TX ring slot was available was incorrect,
since a slot which had been loaded with transmit data but the device had
not started transmitting would be treated as available, potentially
causing non-transmitted slots to be overwritten. The control field in
the descriptor should be checked, rather than the status field (which may
only be updated when the device completes the entry).
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -643,7 +643,6 @@ static int axienet_free_tx_chain(struct
if (cur_p->skb && (status & XAXIDMA_BD_STS_COMPLETE_MASK))
dev_consume_skb_irq(cur_p->skb);
- cur_p->cntrl = 0;
cur_p->app0 = 0;
cur_p->app1 = 0;
cur_p->app2 = 0;
@@ -651,6 +650,7 @@ static int axienet_free_tx_chain(struct
cur_p->skb = NULL;
/* ensure our transmit path and device don't prematurely see status cleared */
wmb();
+ cur_p->cntrl = 0;
cur_p->status = 0;
if (sizep)
@@ -713,7 +713,7 @@ static inline int axienet_check_tx_bd_sp
/* Ensure we see all descriptor updates from device or TX IRQ path */
rmb();
cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
- if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK)
+ if (cur_p->cntrl)
return NETDEV_TX_BUSY;
return 0;
}
From: Marc Zyngier <[email protected]>
[ Upstream commit 79a7f77b9b154d572bd9d2f1eecf58c4d018d8e2 ]
Jay Chen reported that using a kdump kernel on a GICv4.1 system
results in a RAS error being delivered when the secondary kernel
configures the ITS's view of the new VPE table.
As it turns out, that's because each RD still has a pointer to
the previous instance of the VPE table, and that particular
implementation is very upset by seeing two bits of the HW that
should point to the same table with different values.
To solve this, let's invalidate any reference that any RD has to
the VPE table when discovering the RDs. The ITS can then be
programmed as expected.
Reported-by: Jay Chen <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-gic-v3.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index fd4e9a37fea67..7bbccb13b896b 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -920,6 +920,22 @@ static int __gic_update_rdist_properties(struct redist_region *region,
{
u64 typer = gic_read_typer(ptr + GICR_TYPER);
+ /* Boot-time cleanip */
+ if ((typer & GICR_TYPER_VLPIS) && (typer & GICR_TYPER_RVPEID)) {
+ u64 val;
+
+ /* Deactivate any present vPE */
+ val = gicr_read_vpendbaser(ptr + SZ_128K + GICR_VPENDBASER);
+ if (val & GICR_VPENDBASER_Valid)
+ gicr_write_vpendbaser(GICR_VPENDBASER_PendingLast,
+ ptr + SZ_128K + GICR_VPENDBASER);
+
+ /* Mark the VPE table as invalid */
+ val = gicr_read_vpropbaser(ptr + SZ_128K + GICR_VPROPBASER);
+ val &= ~GICR_VPROPBASER_4_1_VALID;
+ gicr_write_vpropbaser(val, ptr + SZ_128K + GICR_VPROPBASER);
+ }
+
gic_data.rdists.has_vlpis &= !!(typer & GICR_TYPER_VLPIS);
/* RVPEID implies some form of DirectLPI, no matter what the doc says... :-/ */
--
2.34.1
From: John Keeping <[email protected]>
commit bceb6732f3fd2a55d8f2e518cced1c7555e216b6 upstream.
GPIO nodes are not themselves busses, so passing rockchip_bank_match
here is wrong. Passing NULL instead uses the standard bus match table
which is more appropriate.
devm_of_platform_populate() shows that this is the normal way to call
of_platform_populate() from a device driver, so in order to match that
more closely also add the pinctrl device as the parent for the newly
created GPIO controllers.
Specifically, using the wrong match here can break dynamic GPIO hogs as
marking the GPIO bank as a bus means that of_platform_notify() will set
OF_POPULATED on new child nodes and if this happens before
of_gpio_notify() is called then the new hog will be skipped as
OF_POPULATED is already set.
Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: John Keeping <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/pinctrl-rockchip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -2748,7 +2748,7 @@ static int rockchip_pinctrl_probe(struct
platform_set_drvdata(pdev, info);
- ret = of_platform_populate(np, rockchip_bank_match, NULL, NULL);
+ ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
if (ret) {
dev_err(&pdev->dev, "failed to register gpio device\n");
return ret;
From: Lakshmi Sowjanya D <[email protected]>
[ Upstream commit d52097010078c1844348dc0e467305e5f90fd317 ]
The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16.
It's better to have same data type in struct dw_scl_sda_cfg as well.
Reported-by: Wolfram Sang <[email protected]>
Signed-off-by: Lakshmi Sowjanya D <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Jarkko Nikula <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 0f409a4c2da0d..5b45941bcbddc 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -39,10 +39,10 @@ enum dw_pci_ctl_id_t {
};
struct dw_scl_sda_cfg {
- u32 ss_hcnt;
- u32 fs_hcnt;
- u32 ss_lcnt;
- u32 fs_lcnt;
+ u16 ss_hcnt;
+ u16 fs_hcnt;
+ u16 ss_lcnt;
+ u16 fs_lcnt;
u32 sda_hold;
};
--
2.34.1
From: Petr Cvachoucek <[email protected]>
commit 3fea4d9d160186617ff40490ae01f4f4f36b28ff upstream.
it seems freeing the write buffers in the error path of the
ubifs_remount_rw() is wrong. It leads later to a kernel oops like this:
[10016.431274] UBIFS (ubi0:0): start fixing up free space
[10090.810042] UBIFS (ubi0:0): free space fixup complete
[10090.814623] UBIFS error (ubi0:0 pid 512): ubifs_remount_fs: cannot
spawn "ubifs_bgt0_0", error -4
[10101.915108] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started,
PID 517
[10105.275498] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000030
[10105.284352] Mem abort info:
[10105.287160] ESR = 0x96000006
[10105.290252] EC = 0x25: DABT (current EL), IL = 32 bits
[10105.295592] SET = 0, FnV = 0
[10105.298652] EA = 0, S1PTW = 0
[10105.301848] Data abort info:
[10105.304723] ISV = 0, ISS = 0x00000006
[10105.308573] CM = 0, WnR = 0
[10105.311564] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000f03d1000
[10105.318034] [0000000000000030] pgd=00000000f6cee003,
pud=00000000f4884003, pmd=0000000000000000
[10105.326783] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[10105.332355] Modules linked in: ath10k_pci ath10k_core ath mac80211
libarc4 cfg80211 nvme nvme_core cryptodev(O)
[10105.342468] CPU: 3 PID: 518 Comm: touch Tainted: G O
5.4.3 #1
[10105.349517] Hardware name: HYPEX CPU (DT)
[10105.353525] pstate: 40000005 (nZcv daif -PAN -UAO)
[10105.358324] pc : atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34
[10105.364596] lr : mutex_lock+0x1c/0x34
[10105.368253] sp : ffff000075633aa0
[10105.371563] x29: ffff000075633aa0 x28: 0000000000000001
[10105.376874] x27: ffff000076fa80c8 x26: 0000000000000004
[10105.382185] x25: 0000000000000030 x24: 0000000000000000
[10105.387495] x23: 0000000000000000 x22: 0000000000000038
[10105.392807] x21: 000000000000000c x20: ffff000076fa80c8
[10105.398119] x19: ffff000076fa8000 x18: 0000000000000000
[10105.403429] x17: 0000000000000000 x16: 0000000000000000
[10105.408741] x15: 0000000000000000 x14: fefefefefefefeff
[10105.414052] x13: 0000000000000000 x12: 0000000000000fe0
[10105.419364] x11: 0000000000000fe0 x10: ffff000076709020
[10105.424675] x9 : 0000000000000000 x8 : 00000000000000a0
[10105.429986] x7 : ffff000076fa80f4 x6 : 0000000000000030
[10105.435297] x5 : 0000000000000000 x4 : 0000000000000000
[10105.440609] x3 : 0000000000000000 x2 : ffff00006f276040
[10105.445920] x1 : ffff000075633ab8 x0 : 0000000000000030
[10105.451232] Call trace:
[10105.453676] atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34
[10105.459600] ubifs_garbage_collect+0xb4/0x334
[10105.463956] ubifs_budget_space+0x398/0x458
[10105.468139] ubifs_create+0x50/0x180
[10105.471712] path_openat+0x6a0/0x9b0
[10105.475284] do_filp_open+0x34/0x7c
[10105.478771] do_sys_open+0x78/0xe4
[10105.482170] __arm64_sys_openat+0x1c/0x24
[10105.486180] el0_svc_handler+0x84/0xc8
[10105.489928] el0_svc+0x8/0xc
[10105.492808] Code: 52800013 17fffffb d2800003 f9800011 (c85ffc05)
[10105.498903] ---[ end trace 46b721d93267a586 ]---
To reproduce the problem:
1. Filesystem initially mounted read-only, free space fixup flag set.
2. mount -o remount,rw <mountpoint>
3. it takes some time (free space fixup running)
... try to terminate running mount by CTRL-C
... does not respond, only after free space fixup is complete
... then "ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4"
4. mount -o remount,rw <mountpoint>
... now finished instantly (fixup already done).
5. Create file or just unmount the filesystem and we get the oops.
Cc: <[email protected]>
Fixes: b50b9f408502 ("UBIFS: do not free write-buffers when in R/O mode")
Signed-off-by: Petr Cvachoucek <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/super.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1853,7 +1853,6 @@ out:
kthread_stop(c->bgt);
c->bgt = NULL;
}
- free_wbufs(c);
kfree(c->write_reserve_buf);
c->write_reserve_buf = NULL;
vfree(c->ileb_buf);
From: Tom Rix <[email protected]>
commit baa59504c1cd0cca7d41954a45ee0b3dc78e41a0 upstream.
Clang static analysis reports this issue
ocelot_flower.c:563:8: warning: 1st function call argument
is an uninitialized value
!is_zero_ether_addr(match.mask->dst)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The variable match is used before it is set. So move the
block.
Fixes: 75944fda1dfe ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mscc/ocelot_flower.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/mscc/ocelot_flower.c
+++ b/drivers/net/ethernet/mscc/ocelot_flower.c
@@ -467,13 +467,6 @@ ocelot_flower_parse_key(struct ocelot *o
return -EOPNOTSUPP;
}
- if (filter->block_id == VCAP_IS1 &&
- !is_zero_ether_addr(match.mask->dst)) {
- NL_SET_ERR_MSG_MOD(extack,
- "Key type S1_NORMAL cannot match on destination MAC");
- return -EOPNOTSUPP;
- }
-
/* The hw support mac matches only for MAC_ETYPE key,
* therefore if other matches(port, tcp flags, etc) are added
* then just bail out
@@ -488,6 +481,14 @@ ocelot_flower_parse_key(struct ocelot *o
return -EOPNOTSUPP;
flow_rule_match_eth_addrs(rule, &match);
+
+ if (filter->block_id == VCAP_IS1 &&
+ !is_zero_ether_addr(match.mask->dst)) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Key type S1_NORMAL cannot match on destination MAC");
+ return -EOPNOTSUPP;
+ }
+
filter->key_type = OCELOT_VCAP_KEY_ETYPE;
ether_addr_copy(filter->key.etype.dmac.value,
match.key->dst);
From: Ye Guojin <[email protected]>
[ Upstream commit 858779df1c0787d3fec827fb705708df9ebdb15b ]
This was found by coccicheck:
./arch/mips/cavium-octeon/octeon-platform.c, 332, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 324, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-platform.c, 395, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 387, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-usb.c, 512, 3-9, ERROR missing
put_device; call of_find_device_by_node on line 515, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-usb.c, 543, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 515, but without a
corresponding object release within this function.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Ye Guojin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/cavium-octeon/octeon-platform.c | 2 ++
arch/mips/cavium-octeon/octeon-usb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index d56e9b9d2e434..a994022e32c9f 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -328,6 +328,7 @@ static int __init octeon_ehci_device_init(void)
pd->dev.platform_data = &octeon_ehci_pdata;
octeon_ehci_hw_start(&pd->dev);
+ put_device(&pd->dev);
return ret;
}
@@ -391,6 +392,7 @@ static int __init octeon_ohci_device_init(void)
pd->dev.platform_data = &octeon_ohci_pdata;
octeon_ohci_hw_start(&pd->dev);
+ put_device(&pd->dev);
return ret;
}
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 6e4d3619137af..4df919d26b082 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -537,6 +537,7 @@ static int __init dwc3_octeon_device_init(void)
devm_iounmap(&pdev->dev, base);
devm_release_mem_region(&pdev->dev, res->start,
resource_size(res));
+ put_device(&pdev->dev);
}
} while (node != NULL);
--
2.34.1
From: Chunfeng Yun <[email protected]>
[ Upstream commit 6f2b033cb883f64ad084a75f13634242c7e179a6 ]
Due to some SoCs have a bit shift issue that will drop a bit for usb3
phy or pcie phy, fix it by adding software efuse reading and setting,
but only support it optionally for version 2/3.
Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/mediatek/phy-mtk-tphy.c | 162 ++++++++++++++++++++++++++++
1 file changed, 162 insertions(+)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index cdcef865fe9e5..98a942c607a67 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -12,6 +12,7 @@
#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
@@ -41,6 +42,9 @@
#define SSUSB_SIFSLV_V2_U3PHYD 0x200
#define SSUSB_SIFSLV_V2_U3PHYA 0x400
+#define U3P_MISC_REG1 0x04
+#define MR1_EFUSE_AUTO_LOAD_DIS BIT(6)
+
#define U3P_USBPHYACR0 0x000
#define PA0_RG_U2PLL_FORCE_ON BIT(15)
#define PA0_USB20_PLL_PREDIV GENMASK(7, 6)
@@ -133,6 +137,8 @@
#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24)
#define U3P_U3_PHYA_REG0 0x000
+#define P3A_RG_IEXT_INTR GENMASK(15, 10)
+#define P3A_RG_IEXT_INTR_VAL(x) ((0x3f & (x)) << 10)
#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2)
@@ -187,6 +193,19 @@
#define P3D_RG_FWAKE_TH GENMASK(21, 16)
#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16)
+#define U3P_U3_PHYD_IMPCAL0 0x010
+#define P3D_RG_FORCE_TX_IMPEL BIT(31)
+#define P3D_RG_TX_IMPEL GENMASK(28, 24)
+#define P3D_RG_TX_IMPEL_VAL(x) ((0x1f & (x)) << 24)
+
+#define U3P_U3_PHYD_IMPCAL1 0x014
+#define P3D_RG_FORCE_RX_IMPEL BIT(31)
+#define P3D_RG_RX_IMPEL GENMASK(28, 24)
+#define P3D_RG_RX_IMPEL_VAL(x) ((0x1f & (x)) << 24)
+
+#define U3P_U3_PHYD_RSV 0x054
+#define P3D_RG_EFUSE_AUTO_LOAD_DIS BIT(12)
+
#define U3P_U3_PHYD_CDR1 0x05c
#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
@@ -307,6 +326,11 @@ struct mtk_phy_pdata {
* 48M PLL, fix it by switching PLL to 26M from default 48M
*/
bool sw_pll_48m_to_26m;
+ /*
+ * Some SoCs (e.g. mt8195) drop a bit when use auto load efuse,
+ * support sw way, also support it for v2/v3 optionally.
+ */
+ bool sw_efuse_supported;
enum mtk_phy_version version;
};
@@ -336,6 +360,10 @@ struct mtk_phy_instance {
struct regmap *type_sw;
u32 type_sw_reg;
u32 type_sw_index;
+ u32 efuse_sw_en;
+ u32 efuse_intr;
+ u32 efuse_tx_imp;
+ u32 efuse_rx_imp;
int eye_src;
int eye_vrt;
int eye_term;
@@ -1040,6 +1068,130 @@ static int phy_type_set(struct mtk_phy_instance *instance)
return 0;
}
+static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
+{
+ struct device *dev = &instance->phy->dev;
+ int ret = 0;
+
+ /* tphy v1 doesn't support sw efuse, skip it */
+ if (!tphy->pdata->sw_efuse_supported) {
+ instance->efuse_sw_en = 0;
+ return 0;
+ }
+
+ /* software efuse is optional */
+ instance->efuse_sw_en = device_property_read_bool(dev, "nvmem-cells");
+ if (!instance->efuse_sw_en)
+ return 0;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr);
+ if (ret) {
+ dev_err(dev, "fail to get u2 intr efuse, %d\n", ret);
+ break;
+ }
+
+ /* no efuse, ignore it */
+ if (!instance->efuse_intr) {
+ dev_warn(dev, "no u2 intr efuse, but dts enable it\n");
+ instance->efuse_sw_en = 0;
+ break;
+ }
+
+ dev_dbg(dev, "u2 efuse - intr %x\n", instance->efuse_intr);
+ break;
+
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr);
+ if (ret) {
+ dev_err(dev, "fail to get u3 intr efuse, %d\n", ret);
+ break;
+ }
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "rx_imp", &instance->efuse_rx_imp);
+ if (ret) {
+ dev_err(dev, "fail to get u3 rx_imp efuse, %d\n", ret);
+ break;
+ }
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "tx_imp", &instance->efuse_tx_imp);
+ if (ret) {
+ dev_err(dev, "fail to get u3 tx_imp efuse, %d\n", ret);
+ break;
+ }
+
+ /* no efuse, ignore it */
+ if (!instance->efuse_intr &&
+ !instance->efuse_rx_imp &&
+ !instance->efuse_rx_imp) {
+ dev_warn(dev, "no u3 intr efuse, but dts enable it\n");
+ instance->efuse_sw_en = 0;
+ break;
+ }
+
+ dev_dbg(dev, "u3 efuse - intr %x, rx_imp %x, tx_imp %x\n",
+ instance->efuse_intr, instance->efuse_rx_imp,instance->efuse_tx_imp);
+ break;
+ default:
+ dev_err(dev, "no sw efuse for type %d\n", instance->type);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void phy_efuse_set(struct mtk_phy_instance *instance)
+{
+ struct device *dev = &instance->phy->dev;
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ u32 tmp;
+
+ if (!instance->efuse_sw_en)
+ return;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+ tmp |= MR1_EFUSE_AUTO_LOAD_DIS;
+ writel(tmp, u2_banks->misc + U3P_MISC_REG1);
+
+ tmp = readl(u2_banks->com + U3P_USBPHYACR1);
+ tmp &= ~PA1_RG_INTR_CAL;
+ tmp |= PA1_RG_INTR_CAL_VAL(instance->efuse_intr);
+ writel(tmp, u2_banks->com + U3P_USBPHYACR1);
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+ tmp |= P3D_RG_EFUSE_AUTO_LOAD_DIS;
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RSV);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+ tmp &= ~P3D_RG_TX_IMPEL;
+ tmp |= P3D_RG_TX_IMPEL_VAL(instance->efuse_tx_imp);
+ tmp |= P3D_RG_FORCE_TX_IMPEL;
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+ tmp &= ~P3D_RG_RX_IMPEL;
+ tmp |= P3D_RG_RX_IMPEL_VAL(instance->efuse_rx_imp);
+ tmp |= P3D_RG_FORCE_RX_IMPEL;
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+ tmp &= ~P3A_RG_IEXT_INTR;
+ tmp |= P3A_RG_IEXT_INTR_VAL(instance->efuse_intr);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0);
+ break;
+ default:
+ dev_warn(dev, "no sw efuse for type %d\n", instance->type);
+ break;
+ }
+}
+
static int mtk_phy_init(struct phy *phy)
{
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
@@ -1050,6 +1202,8 @@ static int mtk_phy_init(struct phy *phy)
if (ret)
return ret;
+ phy_efuse_set(instance);
+
switch (instance->type) {
case PHY_TYPE_USB2:
u2_phy_instance_init(tphy, instance);
@@ -1134,6 +1288,7 @@ static struct phy *mtk_phy_xlate(struct device *dev,
struct mtk_phy_instance *instance = NULL;
struct device_node *phy_np = args->np;
int index;
+ int ret;
if (args->args_count != 1) {
dev_err(dev, "invalid number of cells in 'phy' property\n");
@@ -1174,6 +1329,10 @@ static struct phy *mtk_phy_xlate(struct device *dev,
return ERR_PTR(-EINVAL);
}
+ ret = phy_efuse_get(tphy, instance);
+ if (ret)
+ return ERR_PTR(ret);
+
phy_parse_property(tphy, instance);
phy_type_set(instance);
@@ -1196,10 +1355,12 @@ static const struct mtk_phy_pdata tphy_v1_pdata = {
static const struct mtk_phy_pdata tphy_v2_pdata = {
.avoid_rx_sen_degradation = false,
+ .sw_efuse_supported = true,
.version = MTK_PHY_V2,
};
static const struct mtk_phy_pdata tphy_v3_pdata = {
+ .sw_efuse_supported = true,
.version = MTK_PHY_V3,
};
@@ -1210,6 +1371,7 @@ static const struct mtk_phy_pdata mt8173_pdata = {
static const struct mtk_phy_pdata mt8195_pdata = {
.sw_pll_48m_to_26m = true,
+ .sw_efuse_supported = true,
.version = MTK_PHY_V3,
};
--
2.34.1
From: Kunihiko Hayashi <[email protected]>
commit 80bb73a9fbcde4ecc55e12f10c73fabbe68a24d1 upstream.
In uniphier_spi_remove(), there is a wrong code to get private data from
the platform device, so the driver can't be removed properly.
The driver should get spi_master from the platform device and retrieve
the private data from it.
Cc: <[email protected]>
Fixes: 5ba155a4d4cc ("spi: add SPI controller driver for UniPhier SoC")
Signed-off-by: Kunihiko Hayashi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-uniphier.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/spi/spi-uniphier.c
+++ b/drivers/spi/spi-uniphier.c
@@ -767,12 +767,13 @@ out_master_put:
static int uniphier_spi_remove(struct platform_device *pdev)
{
- struct uniphier_spi_priv *priv = platform_get_drvdata(pdev);
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
- if (priv->master->dma_tx)
- dma_release_channel(priv->master->dma_tx);
- if (priv->master->dma_rx)
- dma_release_channel(priv->master->dma_rx);
+ if (master->dma_tx)
+ dma_release_channel(master->dma_tx);
+ if (master->dma_rx)
+ dma_release_channel(master->dma_rx);
clk_disable_unprepare(priv->clk);
From: Tzung-Bi Shih <[email protected]>
[ Upstream commit cb006006fe6221f092fadaffd3f219288304c9ad ]
Fixes the device_node leak.
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 6 +++++-
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c | 7 ++++++-
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index a4d26a6fc8492..bda103211e0bd 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -781,7 +781,11 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
return ret;
}
- return devm_snd_soc_register_card(&pdev->dev, card);
+ ret = devm_snd_soc_register_card(&pdev->dev, card);
+
+ of_node_put(platform_node);
+ of_node_put(hdmi_codec);
+ return ret;
}
#ifdef CONFIG_OF
diff --git a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
index 94dcbd36c8697..c7b10c48c6c22 100644
--- a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
@@ -780,7 +780,12 @@ mt8183_mt6358_ts3a227_max98357_dev_probe(struct platform_device *pdev)
__func__, ret);
}
- return devm_snd_soc_register_card(&pdev->dev, card);
+ ret = devm_snd_soc_register_card(&pdev->dev, card);
+
+ of_node_put(platform_node);
+ of_node_put(ec_codec);
+ of_node_put(hdmi_codec);
+ return ret;
}
#ifdef CONFIG_OF
--
2.34.1
From: Xiao Ni <[email protected]>
commit 0c031fd37f69deb0cd8c43bbfcfccd62ebd7e952 upstream.
bioset acct is only needed for raid0 and raid5. Therefore, md_run only
allocates it for raid0 and raid5. However, this does not cover
personality takeover, which may cause uninitialized bioset. For example,
the following repro steps:
mdadm -CR /dev/md0 -l1 -n2 /dev/loop0 /dev/loop1
mdadm --wait /dev/md0
mkfs.xfs /dev/md0
mdadm /dev/md0 --grow -l5
mount /dev/md0 /mnt
causes panic like:
[ 225.933939] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 225.934903] #PF: supervisor instruction fetch in kernel mode
[ 225.935639] #PF: error_code(0x0010) - not-present page
[ 225.936361] PGD 0 P4D 0
[ 225.936677] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 225.937525] CPU: 27 PID: 1133 Comm: mount Not tainted 5.16.0-rc3+ #706
[ 225.938416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.module_el8.4.0+547+a85d02ba 04/01/2014
[ 225.939922] RIP: 0010:0x0
[ 225.940289] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 225.941196] RSP: 0018:ffff88815897eff0 EFLAGS: 00010246
[ 225.941897] RAX: 0000000000000000 RBX: 0000000000092800 RCX: ffffffff81370a39
[ 225.942813] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000092800
[ 225.943772] RBP: 1ffff1102b12fe04 R08: fffffbfff0b43c01 R09: fffffbfff0b43c01
[ 225.944807] R10: ffffffff85a1e007 R11: fffffbfff0b43c00 R12: ffff88810eaaaf58
[ 225.945757] R13: 0000000000000000 R14: ffff88810eaaafb8 R15: ffff88815897f040
[ 225.946709] FS: 00007ff3f2505080(0000) GS:ffff888fb5e00000(0000) knlGS:0000000000000000
[ 225.947814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 225.948556] CR2: ffffffffffffffd6 CR3: 000000015aa5a006 CR4: 0000000000370ee0
[ 225.949537] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 225.950455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 225.951414] Call Trace:
[ 225.951787] <TASK>
[ 225.952120] mempool_alloc+0xe5/0x250
[ 225.952625] ? mempool_resize+0x370/0x370
[ 225.953187] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 225.953862] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 225.954464] ? sched_clock_cpu+0x15/0x120
[ 225.955019] ? find_held_lock+0xac/0xd0
[ 225.955564] bio_alloc_bioset+0x1ed/0x2a0
[ 225.956080] ? lock_downgrade+0x3a0/0x3a0
[ 225.956644] ? bvec_alloc+0xc0/0xc0
[ 225.957135] bio_clone_fast+0x19/0x80
[ 225.957651] raid5_make_request+0x1370/0x1b70
[ 225.958286] ? sched_clock_cpu+0x15/0x120
[ 225.958797] ? __lock_acquire+0x8b2/0x3510
[ 225.959339] ? raid5_get_active_stripe+0xce0/0xce0
[ 225.959986] ? lock_is_held_type+0xd8/0x130
[ 225.960528] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 225.961135] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 225.961703] ? sched_clock_cpu+0x15/0x120
[ 225.962232] ? lock_release+0x27a/0x6c0
[ 225.962746] ? do_wait_intr_irq+0x130/0x130
[ 225.963302] ? lock_downgrade+0x3a0/0x3a0
[ 225.963815] ? lock_release+0x6c0/0x6c0
[ 225.964348] md_handle_request+0x342/0x530
[ 225.964888] ? set_in_sync+0x170/0x170
[ 225.965397] ? blk_queue_split+0x133/0x150
[ 225.965988] ? __blk_queue_split+0x8b0/0x8b0
[ 225.966524] ? submit_bio_checks+0x3b2/0x9d0
[ 225.967069] md_submit_bio+0x127/0x1c0
[...]
Fix this by moving alloc/free of acct bioset to pers->run and pers->free.
While we are on this, properly handle md_integrity_register() error in
raid0_run().
Fixes: daee2024715d (md: check level before create and exit io_acct_set)
Cc: [email protected]
Acked-by: Guoqing Jiang <[email protected]>
Signed-off-by: Xiao Ni <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 27 +++++++++++++++++----------
drivers/md/md.h | 2 ++
drivers/md/raid0.c | 38 ++++++++++++++++++++++++++++----------
drivers/md/raid5.c | 41 ++++++++++++++++++++++++++++++-----------
4 files changed, 77 insertions(+), 31 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5872,13 +5872,6 @@ int md_run(struct mddev *mddev)
if (err)
goto exit_bio_set;
}
- if (mddev->level != 1 && mddev->level != 10 &&
- !bioset_initialized(&mddev->io_acct_set)) {
- err = bioset_init(&mddev->io_acct_set, BIO_POOL_SIZE,
- offsetof(struct md_io_acct, bio_clone), 0);
- if (err)
- goto exit_sync_set;
- }
spin_lock(&pers_lock);
pers = find_pers(mddev->level, mddev->clevel);
@@ -6055,9 +6048,6 @@ bitmap_abort:
module_put(pers->owner);
md_bitmap_destroy(mddev);
abort:
- if (mddev->level != 1 && mddev->level != 10)
- bioset_exit(&mddev->io_acct_set);
-exit_sync_set:
bioset_exit(&mddev->sync_set);
exit_bio_set:
bioset_exit(&mddev->bio_set);
@@ -8590,6 +8580,23 @@ void md_submit_discard_bio(struct mddev
}
EXPORT_SYMBOL_GPL(md_submit_discard_bio);
+int acct_bioset_init(struct mddev *mddev)
+{
+ int err = 0;
+
+ if (!bioset_initialized(&mddev->io_acct_set))
+ err = bioset_init(&mddev->io_acct_set, BIO_POOL_SIZE,
+ offsetof(struct md_io_acct, bio_clone), 0);
+ return err;
+}
+EXPORT_SYMBOL_GPL(acct_bioset_init);
+
+void acct_bioset_exit(struct mddev *mddev)
+{
+ bioset_exit(&mddev->io_acct_set);
+}
+EXPORT_SYMBOL_GPL(acct_bioset_exit);
+
static void md_end_io_acct(struct bio *bio)
{
struct md_io_acct *md_io_acct = bio->bi_private;
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -721,6 +721,8 @@ extern void md_error(struct mddev *mddev
extern void md_finish_reshape(struct mddev *mddev);
void md_submit_discard_bio(struct mddev *mddev, struct md_rdev *rdev,
struct bio *bio, sector_t start, sector_t size);
+int acct_bioset_init(struct mddev *mddev);
+void acct_bioset_exit(struct mddev *mddev);
void md_account_bio(struct mddev *mddev, struct bio **bio);
extern bool __must_check md_flush_request(struct mddev *mddev, struct bio *bio);
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -356,7 +356,21 @@ static sector_t raid0_size(struct mddev
return array_sectors;
}
-static void raid0_free(struct mddev *mddev, void *priv);
+static void free_conf(struct mddev *mddev, struct r0conf *conf)
+{
+ kfree(conf->strip_zone);
+ kfree(conf->devlist);
+ kfree(conf);
+ mddev->private = NULL;
+}
+
+static void raid0_free(struct mddev *mddev, void *priv)
+{
+ struct r0conf *conf = priv;
+
+ free_conf(mddev, conf);
+ acct_bioset_exit(mddev);
+}
static int raid0_run(struct mddev *mddev)
{
@@ -370,11 +384,16 @@ static int raid0_run(struct mddev *mddev
if (md_check_no_bitmap(mddev))
return -EINVAL;
+ if (acct_bioset_init(mddev)) {
+ pr_err("md/raid0:%s: alloc acct bioset failed.\n", mdname(mddev));
+ return -ENOMEM;
+ }
+
/* if private is not null, we are here after takeover */
if (mddev->private == NULL) {
ret = create_strip_zones(mddev, &conf);
if (ret < 0)
- return ret;
+ goto exit_acct_set;
mddev->private = conf;
}
conf = mddev->private;
@@ -413,17 +432,16 @@ static int raid0_run(struct mddev *mddev
dump_zones(mddev);
ret = md_integrity_register(mddev);
+ if (ret)
+ goto free;
return ret;
-}
-static void raid0_free(struct mddev *mddev, void *priv)
-{
- struct r0conf *conf = priv;
-
- kfree(conf->strip_zone);
- kfree(conf->devlist);
- kfree(conf);
+free:
+ free_conf(mddev, conf);
+exit_acct_set:
+ acct_bioset_exit(mddev);
+ return ret;
}
static void raid0_handle_discard(struct mddev *mddev, struct bio *bio)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -7446,12 +7446,19 @@ static int raid5_run(struct mddev *mddev
struct md_rdev *rdev;
struct md_rdev *journal_dev = NULL;
sector_t reshape_offset = 0;
- int i;
+ int i, ret = 0;
long long min_offset_diff = 0;
int first = 1;
- if (mddev_init_writes_pending(mddev) < 0)
+ if (acct_bioset_init(mddev)) {
+ pr_err("md/raid456:%s: alloc acct bioset failed.\n", mdname(mddev));
return -ENOMEM;
+ }
+
+ if (mddev_init_writes_pending(mddev) < 0) {
+ ret = -ENOMEM;
+ goto exit_acct_set;
+ }
if (mddev->recovery_cp != MaxSector)
pr_notice("md/raid:%s: not clean -- starting background reconstruction\n",
@@ -7482,7 +7489,8 @@ static int raid5_run(struct mddev *mddev
(mddev->bitmap_info.offset || mddev->bitmap_info.file)) {
pr_notice("md/raid:%s: array cannot have both journal and bitmap\n",
mdname(mddev));
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit_acct_set;
}
if (mddev->reshape_position != MaxSector) {
@@ -7507,13 +7515,15 @@ static int raid5_run(struct mddev *mddev
if (journal_dev) {
pr_warn("md/raid:%s: don't support reshape with journal - aborting.\n",
mdname(mddev));
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit_acct_set;
}
if (mddev->new_level != mddev->level) {
pr_warn("md/raid:%s: unsupported reshape required - aborting.\n",
mdname(mddev));
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit_acct_set;
}
old_disks = mddev->raid_disks - mddev->delta_disks;
/* reshape_position must be on a new-stripe boundary, and one
@@ -7529,7 +7539,8 @@ static int raid5_run(struct mddev *mddev
if (sector_div(here_new, chunk_sectors * new_data_disks)) {
pr_warn("md/raid:%s: reshape_position not on a stripe boundary\n",
mdname(mddev));
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit_acct_set;
}
reshape_offset = here_new * chunk_sectors;
/* here_new is the stripe we will write to */
@@ -7551,7 +7562,8 @@ static int raid5_run(struct mddev *mddev
else if (mddev->ro == 0) {
pr_warn("md/raid:%s: in-place reshape must be started in read-only mode - aborting\n",
mdname(mddev));
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit_acct_set;
}
} else if (mddev->reshape_backwards
? (here_new * chunk_sectors + min_offset_diff <=
@@ -7561,7 +7573,8 @@ static int raid5_run(struct mddev *mddev
/* Reading from the same stripe as writing to - bad */
pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
mdname(mddev));
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit_acct_set;
}
pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
/* OK, we should be able to continue; */
@@ -7585,8 +7598,10 @@ static int raid5_run(struct mddev *mddev
else
conf = mddev->private;
- if (IS_ERR(conf))
- return PTR_ERR(conf);
+ if (IS_ERR(conf)) {
+ ret = PTR_ERR(conf);
+ goto exit_acct_set;
+ }
if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) {
if (!journal_dev) {
@@ -7786,7 +7801,10 @@ abort:
free_conf(conf);
mddev->private = NULL;
pr_warn("md/raid:%s: failed to run raid set.\n", mdname(mddev));
- return -EIO;
+ ret = -EIO;
+exit_acct_set:
+ acct_bioset_exit(mddev);
+ return ret;
}
static void raid5_free(struct mddev *mddev, void *priv)
@@ -7794,6 +7812,7 @@ static void raid5_free(struct mddev *mdd
struct r5conf *conf = priv;
free_conf(conf);
+ acct_bioset_exit(mddev);
mddev->to_remove = &raid5_attrs_group;
}
From: Christophe JAILLET <[email protected]>
commit 33812fc7c8d77a43b7e2bf36a0d5a57c277a4b0c upstream.
If the timer introduced by the commit below is started, then it must be
deleted in the error handling of the probe. Otherwise it would trigger
once the driver is no more.
Fixes: 0b91b4e4dae6 ("HID: magicmouse: Report battery level over USB")
Signed-off-by: Christophe JAILLET <[email protected]>
Tested-by: José Expósito <[email protected]>
Reported-by: <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-magicmouse.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -873,6 +873,7 @@ static int magicmouse_probe(struct hid_d
return 0;
err_stop_hw:
+ del_timer_sync(&msc->battery_timer);
hid_hw_stop(hdev);
return ret;
}
From: Arnaud Pouliquen <[email protected]>
commit 8066c615cb69b7da8a94f59379847b037b3a5e46 upstream.
During the rpmsg_dev_probe, if rpdev->ops->announce_create returns an
error, the rpmsg device and default endpoint should be freed before
exiting the function.
Fixes: 5e619b48677c ("rpmsg: Split rpmsg core and virtio backend")
Suggested-by: Bjorn Andersson <[email protected]>
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rpmsg/rpmsg_core.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -519,13 +519,25 @@ static int rpmsg_dev_probe(struct device
err = rpdrv->probe(rpdev);
if (err) {
dev_err(dev, "%s: failed: %d\n", __func__, err);
- if (ept)
- rpmsg_destroy_ept(ept);
- goto out;
+ goto destroy_ept;
}
- if (ept && rpdev->ops->announce_create)
+ if (ept && rpdev->ops->announce_create) {
err = rpdev->ops->announce_create(rpdev);
+ if (err) {
+ dev_err(dev, "failed to announce creation\n");
+ goto remove_rpdev;
+ }
+ }
+
+ return 0;
+
+remove_rpdev:
+ if (rpdrv->remove)
+ rpdrv->remove(rpdev);
+destroy_ept:
+ if (ept)
+ rpmsg_destroy_ept(ept);
out:
return err;
}
From: Dmitry Osipenko <[email protected]>
commit 7620ad0bdfac1efff4a1228cd36ae62a9d8206b0 upstream.
The PWR_OFF bit needs to be set in order to power off properly, without
hanging PMIC. This bit needs to be set early in order to allow thermal
protection of NVIDIA Terga SoCs to power off hardware properly, otherwise
a battery re-plug may be needed on some devices to recover after the hang.
Cc: <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Tested-by: Svyatoslav Ryhel <[email protected]> # ASUS TF201
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mfd/tps65910.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -436,15 +436,6 @@ static void tps65910_power_off(void)
tps65910 = dev_get_drvdata(&tps65910_i2c_client->dev);
- /*
- * The PWR_OFF bit needs to be set separately, before transitioning
- * to the OFF state. It enables the "sequential" power-off mode on
- * TPS65911, it's a NO-OP on TPS65910.
- */
- if (regmap_set_bits(tps65910->regmap, TPS65910_DEVCTRL,
- DEVCTRL_PWR_OFF_MASK) < 0)
- return;
-
regmap_update_bits(tps65910->regmap, TPS65910_DEVCTRL,
DEVCTRL_DEV_OFF_MASK | DEVCTRL_DEV_ON_MASK,
DEVCTRL_DEV_OFF_MASK);
@@ -504,6 +495,19 @@ static int tps65910_i2c_probe(struct i2c
tps65910_sleepinit(tps65910, pmic_plat_data);
if (pmic_plat_data->pm_off && !pm_power_off) {
+ /*
+ * The PWR_OFF bit needs to be set separately, before
+ * transitioning to the OFF state. It enables the "sequential"
+ * power-off mode on TPS65911, it's a NO-OP on TPS65910.
+ */
+ ret = regmap_set_bits(tps65910->regmap, TPS65910_DEVCTRL,
+ DEVCTRL_PWR_OFF_MASK);
+ if (ret) {
+ dev_err(&i2c->dev, "failed to set power-off mode: %d\n",
+ ret);
+ return ret;
+ }
+
tps65910_i2c_client = i2c;
pm_power_off = tps65910_power_off;
}
From: Tzung-Bi Shih <[email protected]>
[ Upstream commit 493433785df0075afc0c106ab65f10a605d0b35d ]
Fixes the device_node leak.
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8173/mt8173-max98090.c | 3 +++
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 ++
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 ++
sound/soc/mediatek/mt8173/mt8173-rt5650.c | 2 ++
4 files changed, 9 insertions(+)
diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c
index fc94314bfc02f..3bdd4931316cd 100644
--- a/sound/soc/mediatek/mt8173/mt8173-max98090.c
+++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c
@@ -180,6 +180,9 @@ static int mt8173_max98090_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(codec_node);
+ of_node_put(platform_node);
return ret;
}
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
index 0f28dc2217c09..390da5bf727eb 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
@@ -218,6 +218,8 @@ static int mt8173_rt5650_rt5514_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(platform_node);
return ret;
}
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
index 077c6ee067806..c8e4e85e10575 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
@@ -285,6 +285,8 @@ static int mt8173_rt5650_rt5676_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(platform_node);
return ret;
}
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
index c28ebf891cb05..e168d31f44459 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
@@ -323,6 +323,8 @@ static int mt8173_rt5650_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(platform_node);
return ret;
}
--
2.34.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit d94d94969a4ba07a43d62429c60372320519c391 ]
The allocated buffers are used as a command payload, for which the block
layer and/or DMA API do the proper bounce buffering if needed.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Baoquan He <[email protected]>
Reviewed-by: Baoquan He <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/sr.c | 2 +-
drivers/scsi/sr_vendor.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 8b17b35283aa5..1203374828b97 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -851,7 +851,7 @@ static void get_capabilities(struct scsi_cd *cd)
/* allocate transfer buffer */
- buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buffer = kmalloc(512, GFP_KERNEL);
if (!buffer) {
sr_printk(KERN_ERR, cd, "out of memory.\n");
return;
diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c
index 1f988a1b9166f..a61635326ae0a 100644
--- a/drivers/scsi/sr_vendor.c
+++ b/drivers/scsi/sr_vendor.c
@@ -131,7 +131,7 @@ int sr_set_blocklength(Scsi_CD *cd, int blocklength)
if (cd->vendor == VENDOR_TOSHIBA)
density = (blocklength > 2048) ? 0x81 : 0x83;
- buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buffer = kmalloc(512, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
@@ -179,7 +179,7 @@ int sr_cd_check(struct cdrom_device_info *cdi)
if (cd->cdi.mask & CDC_MULTI_SESSION)
return 0;
- buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buffer = kmalloc(512, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
--
2.34.1
From: Zhu Lingshan <[email protected]>
commit 0f420c383a2bb414ebccedf9289b5b815f1295fe upstream.
This commit fixes a misuse of virtio-net device config size issue
for virtio-block devices.
A new member config_size in struct ifcvf_hw is introduced and would
be initialized through vdpa_dev_add() to record correct device
config size.
To be more generic, rename ifcvf_hw.net_config to ifcvf_hw.dev_config,
the helpers ifcvf_read/write_net_config() to ifcvf_read/write_dev_config()
Signed-off-by: Zhu Lingshan <[email protected]>
Reported-and-suggested-by: Stefano Garzarella <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Fixes: 6ad31d162a4e ("vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vdpa/ifcvf/ifcvf_base.c | 41 ++++++++++++++++++++++++++++++----------
drivers/vdpa/ifcvf/ifcvf_base.h | 9 +++++---
drivers/vdpa/ifcvf/ifcvf_main.c | 24 +++--------------------
3 files changed, 41 insertions(+), 33 deletions(-)
--- a/drivers/vdpa/ifcvf/ifcvf_base.c
+++ b/drivers/vdpa/ifcvf/ifcvf_base.c
@@ -143,8 +143,8 @@ int ifcvf_init_hw(struct ifcvf_hw *hw, s
IFCVF_DBG(pdev, "hw->isr = %p\n", hw->isr);
break;
case VIRTIO_PCI_CAP_DEVICE_CFG:
- hw->net_cfg = get_cap_addr(hw, &cap);
- IFCVF_DBG(pdev, "hw->net_cfg = %p\n", hw->net_cfg);
+ hw->dev_cfg = get_cap_addr(hw, &cap);
+ IFCVF_DBG(pdev, "hw->dev_cfg = %p\n", hw->dev_cfg);
break;
}
@@ -153,7 +153,7 @@ next:
}
if (hw->common_cfg == NULL || hw->notify_base == NULL ||
- hw->isr == NULL || hw->net_cfg == NULL) {
+ hw->isr == NULL || hw->dev_cfg == NULL) {
IFCVF_ERR(pdev, "Incomplete PCI capabilities\n");
return -EIO;
}
@@ -174,7 +174,7 @@ next:
IFCVF_DBG(pdev,
"PCI capability mapping: common cfg: %p, notify base: %p\n, isr cfg: %p, device cfg: %p, multiplier: %u\n",
hw->common_cfg, hw->notify_base, hw->isr,
- hw->net_cfg, hw->notify_off_multiplier);
+ hw->dev_cfg, hw->notify_off_multiplier);
return 0;
}
@@ -242,33 +242,54 @@ int ifcvf_verify_min_features(struct ifc
return 0;
}
-void ifcvf_read_net_config(struct ifcvf_hw *hw, u64 offset,
+u32 ifcvf_get_config_size(struct ifcvf_hw *hw)
+{
+ struct ifcvf_adapter *adapter;
+ u32 config_size;
+
+ adapter = vf_to_adapter(hw);
+ switch (hw->dev_type) {
+ case VIRTIO_ID_NET:
+ config_size = sizeof(struct virtio_net_config);
+ break;
+ case VIRTIO_ID_BLOCK:
+ config_size = sizeof(struct virtio_blk_config);
+ break;
+ default:
+ config_size = 0;
+ IFCVF_ERR(adapter->pdev, "VIRTIO ID %u not supported\n", hw->dev_type);
+ }
+
+ return config_size;
+}
+
+void ifcvf_read_dev_config(struct ifcvf_hw *hw, u64 offset,
void *dst, int length)
{
u8 old_gen, new_gen, *p;
int i;
- WARN_ON(offset + length > sizeof(struct virtio_net_config));
+ WARN_ON(offset + length > hw->config_size);
do {
old_gen = ifc_ioread8(&hw->common_cfg->config_generation);
p = dst;
for (i = 0; i < length; i++)
- *p++ = ifc_ioread8(hw->net_cfg + offset + i);
+ *p++ = ifc_ioread8(hw->dev_cfg + offset + i);
new_gen = ifc_ioread8(&hw->common_cfg->config_generation);
} while (old_gen != new_gen);
}
-void ifcvf_write_net_config(struct ifcvf_hw *hw, u64 offset,
+void ifcvf_write_dev_config(struct ifcvf_hw *hw, u64 offset,
const void *src, int length)
{
const u8 *p;
int i;
p = src;
- WARN_ON(offset + length > sizeof(struct virtio_net_config));
+ WARN_ON(offset + length > hw->config_size);
for (i = 0; i < length; i++)
- ifc_iowrite8(*p++, hw->net_cfg + offset + i);
+ ifc_iowrite8(*p++, hw->dev_cfg + offset + i);
}
static void ifcvf_set_features(struct ifcvf_hw *hw, u64 features)
--- a/drivers/vdpa/ifcvf/ifcvf_base.h
+++ b/drivers/vdpa/ifcvf/ifcvf_base.h
@@ -71,12 +71,14 @@ struct ifcvf_hw {
u64 hw_features;
u32 dev_type;
struct virtio_pci_common_cfg __iomem *common_cfg;
- void __iomem *net_cfg;
+ void __iomem *dev_cfg;
struct vring_info vring[IFCVF_MAX_QUEUES];
void __iomem * const *base;
char config_msix_name[256];
struct vdpa_callback config_cb;
unsigned int config_irq;
+ /* virtio-net or virtio-blk device config size */
+ u32 config_size;
};
struct ifcvf_adapter {
@@ -105,9 +107,9 @@ int ifcvf_init_hw(struct ifcvf_hw *hw, s
int ifcvf_start_hw(struct ifcvf_hw *hw);
void ifcvf_stop_hw(struct ifcvf_hw *hw);
void ifcvf_notify_queue(struct ifcvf_hw *hw, u16 qid);
-void ifcvf_read_net_config(struct ifcvf_hw *hw, u64 offset,
+void ifcvf_read_dev_config(struct ifcvf_hw *hw, u64 offset,
void *dst, int length);
-void ifcvf_write_net_config(struct ifcvf_hw *hw, u64 offset,
+void ifcvf_write_dev_config(struct ifcvf_hw *hw, u64 offset,
const void *src, int length);
u8 ifcvf_get_status(struct ifcvf_hw *hw);
void ifcvf_set_status(struct ifcvf_hw *hw, u8 status);
@@ -120,4 +122,5 @@ u16 ifcvf_get_vq_state(struct ifcvf_hw *
int ifcvf_set_vq_state(struct ifcvf_hw *hw, u16 qid, u16 num);
struct ifcvf_adapter *vf_to_adapter(struct ifcvf_hw *hw);
int ifcvf_probed_virtio_net(struct ifcvf_hw *hw);
+u32 ifcvf_get_config_size(struct ifcvf_hw *hw);
#endif /* _IFCVF_H_ */
--- a/drivers/vdpa/ifcvf/ifcvf_main.c
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
@@ -366,24 +366,9 @@ static u32 ifcvf_vdpa_get_vq_align(struc
static size_t ifcvf_vdpa_get_config_size(struct vdpa_device *vdpa_dev)
{
- struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
- struct pci_dev *pdev = adapter->pdev;
- size_t size;
- switch (vf->dev_type) {
- case VIRTIO_ID_NET:
- size = sizeof(struct virtio_net_config);
- break;
- case VIRTIO_ID_BLOCK:
- size = sizeof(struct virtio_blk_config);
- break;
- default:
- size = 0;
- IFCVF_ERR(pdev, "VIRTIO ID %u not supported\n", vf->dev_type);
- }
-
- return size;
+ return vf->config_size;
}
static void ifcvf_vdpa_get_config(struct vdpa_device *vdpa_dev,
@@ -392,8 +377,7 @@ static void ifcvf_vdpa_get_config(struct
{
struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
- WARN_ON(offset + len > sizeof(struct virtio_net_config));
- ifcvf_read_net_config(vf, offset, buf, len);
+ ifcvf_read_dev_config(vf, offset, buf, len);
}
static void ifcvf_vdpa_set_config(struct vdpa_device *vdpa_dev,
@@ -402,8 +386,7 @@ static void ifcvf_vdpa_set_config(struct
{
struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
- WARN_ON(offset + len > sizeof(struct virtio_net_config));
- ifcvf_write_net_config(vf, offset, buf, len);
+ ifcvf_write_dev_config(vf, offset, buf, len);
}
static void ifcvf_vdpa_set_config_cb(struct vdpa_device *vdpa_dev,
@@ -541,6 +524,7 @@ static int ifcvf_vdpa_dev_add(struct vdp
vf->vring[i].irq = -EINVAL;
vf->hw_features = ifcvf_get_hw_features(vf);
+ vf->config_size = ifcvf_get_config_size(vf);
adapter->vdpa.mdev = &ifcvf_mgmt_dev->mdev;
ret = _vdpa_register_device(&adapter->vdpa, vf->nr_vring);
From: Heiner Kallweit <[email protected]>
commit c2aec59be093bd44627bc4f6bc67e4614a93a7b6 upstream.
This fix is basically the same as 3d6b661330a7 ("crypto: stm32 -
Revert broken pm_runtime_resume_and_get changes"), just for the omap
driver. If the return value isn't used, then pm_runtime_get_sync()
has to be used for ensuring that the usage count is balanced.
Fixes: 1f34cc4a8da3 ("crypto: omap-aes - Fix PM reference leak on omap-aes.c")
Cc: [email protected]
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/omap-aes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -1302,7 +1302,7 @@ static int omap_aes_suspend(struct devic
static int omap_aes_resume(struct device *dev)
{
- pm_runtime_resume_and_get(dev);
+ pm_runtime_get_sync(dev);
return 0;
}
#endif
From: Hari Bathini <[email protected]>
[ Upstream commit 06e629c25daa519be620a8c17359ae8fc7a2e903 ]
In panic path, fadump is triggered via a panic notifier function.
Before calling panic notifier functions, smp_send_stop() gets called,
which stops all CPUs except the panic'ing CPU. Commit 8389b37dffdc
("powerpc: stop_this_cpu: remove the cpu from the online map.") and
again commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()")
started marking CPUs as offline while stopping them. So, if a kernel
has either of the above commits, vmcore captured with fadump via panic
path would not process register data for all CPUs except the panic'ing
CPU. Sample output of crash-utility with such vmcore:
# crash vmlinux vmcore
...
KERNEL: vmlinux
DUMPFILE: vmcore [PARTIAL DUMP]
CPUS: 1
DATE: Wed Nov 10 09:56:34 EST 2021
UPTIME: 00:00:42
LOAD AVERAGE: 2.27, 0.69, 0.24
TASKS: 183
NODENAME: XXXXXXXXX
RELEASE: 5.15.0+
VERSION: #974 SMP Wed Nov 10 04:18:19 CST 2021
MACHINE: ppc64le (2500 Mhz)
MEMORY: 8 GB
PANIC: "Kernel panic - not syncing: sysrq triggered crash"
PID: 3394
COMMAND: "bash"
TASK: c0000000150a5f80 [THREAD_INFO: c0000000150a5f80]
CPU: 1
STATE: TASK_RUNNING (PANIC)
crash> p -x __cpu_online_mask
__cpu_online_mask = $1 = {
bits = {0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}
}
crash>
crash>
crash> p -x __cpu_active_mask
__cpu_active_mask = $2 = {
bits = {0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}
}
crash>
While this has been the case since fadump was introduced, the issue
was not identified for two probable reasons:
- In general, the bulk of the vmcores analyzed were from crash
due to exception.
- The above did change since commit 8341f2f222d7 ("sysrq: Use
panic() to force a crash") started using panic() instead of
deferencing NULL pointer to force a kernel crash. But then
commit de6e5d38417e ("powerpc: smp_send_stop do not offline
stopped CPUs") stopped marking CPUs as offline till kernel
commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()")
reverted that change.
To ensure post processing register data of all other CPUs happens
as intended, let panic() function take the crash friendly path (read
crash_smp_send_stop()) with the help of crash_kexec_post_notifiers
option. Also, as register data for all CPUs is captured by f/w, skip
IPI callbacks here for fadump, to avoid any complications in finding
the right backtraces.
Signed-off-by: Hari Bathini <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/fadump.c | 8 ++++++++
arch/powerpc/kernel/smp.c | 10 ++++++++++
2 files changed, 18 insertions(+)
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index b7ceb041743c9..60f5fc14aa235 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -1641,6 +1641,14 @@ int __init setup_fadump(void)
else if (fw_dump.reserve_dump_area_size)
fw_dump.ops->fadump_init_mem_struct(&fw_dump);
+ /*
+ * In case of panic, fadump is triggered via ppc_panic_event()
+ * panic notifier. Setting crash_kexec_post_notifiers to 'true'
+ * lets panic() function take crash friendly path before panic
+ * notifiers are invoked.
+ */
+ crash_kexec_post_notifiers = true;
+
return 1;
}
subsys_initcall(setup_fadump);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index d03823aa7e4de..fb95f92dcfac6 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -61,6 +61,7 @@
#include <asm/cpu_has_feature.h>
#include <asm/ftrace.h>
#include <asm/kup.h>
+#include <asm/fadump.h>
#ifdef DEBUG
#include <asm/udbg.h>
@@ -638,6 +639,15 @@ void crash_smp_send_stop(void)
{
static bool stopped = false;
+ /*
+ * In case of fadump, register data for all CPUs is captured by f/w
+ * on ibm,os-term rtas call. Skip IPI callbacks to other CPUs before
+ * this rtas call to avoid tricky post processing of those CPUs'
+ * backtraces.
+ */
+ if (should_fadump_crash())
+ return;
+
if (stopped)
return;
--
2.34.1
From: Maor Dickman <[email protected]>
[ Upstream commit 7846665d3504812acaebf920d1141851379a7f37 ]
When using libvirt to passthrough VF to VM it will always set the VF vlan
to 0 even if user didn’t request it, this will cause libvirt to fail to
boot in case the PF isn't eswitch owner.
Example of such case is the DPU host PF which isn't eswitch manager, so
any attempt to passthrough VF of it using libvirt will fail.
Fix it by not returning error in case set VF vlan is called with vid 0.
Signed-off-by: Maor Dickman <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c
index df277a6cddc0b..0c4c743ca31e1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c
@@ -431,7 +431,7 @@ int mlx5_eswitch_set_vport_vlan(struct mlx5_eswitch *esw,
int err = 0;
if (!mlx5_esw_allowed(esw))
- return -EPERM;
+ return vlan ? -EPERM : 0;
if (vlan || qos)
set_flags = SET_VLAN_STRIP | SET_VLAN_INSERT;
--
2.34.1
From: Jason A. Donenfeld <[email protected]>
[ Upstream commit 73c7733f122e8d0107f88655a12011f68f69e74b ]
When crng_fast_load() is called by add_hwgenerator_randomness(), we
currently will advance to crng_init==1 once we've acquired 64 bytes, and
then throw away the rest of the buffer. Usually, that is not a problem:
When add_hwgenerator_randomness() gets called via EFI or DT during
setup_arch(), there won't be any IRQ randomness. Therefore, the 64 bytes
passed by EFI exactly matches what is needed to advance to crng_init==1.
Usually, DT seems to pass 64 bytes as well -- with one notable exception
being kexec, which hands over 128 bytes of entropy to the kexec'd kernel.
In that case, we'll advance to crng_init==1 once 64 of those bytes are
consumed by crng_fast_load(), but won't continue onward feeding in bytes
to progress to crng_init==2. This commit fixes the issue by feeding
any leftover bytes into the next phase in add_hwgenerator_randomness().
[[email protected]: rewrite commit message]
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/random.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 7470ee24db2f9..a27ae3999ff32 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -912,12 +912,14 @@ static struct crng_state *select_crng(void)
/*
* crng_fast_load() can be called by code in the interrupt service
- * path. So we can't afford to dilly-dally.
+ * path. So we can't afford to dilly-dally. Returns the number of
+ * bytes processed from cp.
*/
-static int crng_fast_load(const char *cp, size_t len)
+static size_t crng_fast_load(const char *cp, size_t len)
{
unsigned long flags;
char *p;
+ size_t ret = 0;
if (!spin_trylock_irqsave(&primary_crng.lock, flags))
return 0;
@@ -928,7 +930,7 @@ static int crng_fast_load(const char *cp, size_t len)
p = (unsigned char *) &primary_crng.state[4];
while (len > 0 && crng_init_cnt < CRNG_INIT_CNT_THRESH) {
p[crng_init_cnt % CHACHA_KEY_SIZE] ^= *cp;
- cp++; crng_init_cnt++; len--;
+ cp++; crng_init_cnt++; len--; ret++;
}
spin_unlock_irqrestore(&primary_crng.lock, flags);
if (crng_init_cnt >= CRNG_INIT_CNT_THRESH) {
@@ -936,7 +938,7 @@ static int crng_fast_load(const char *cp, size_t len)
crng_init = 1;
pr_notice("fast init done\n");
}
- return 1;
+ return ret;
}
/*
@@ -1287,7 +1289,7 @@ void add_interrupt_randomness(int irq, int irq_flags)
if (unlikely(crng_init == 0)) {
if ((fast_pool->count >= 64) &&
crng_fast_load((char *) fast_pool->pool,
- sizeof(fast_pool->pool))) {
+ sizeof(fast_pool->pool)) > 0) {
fast_pool->count = 0;
fast_pool->last = now;
}
@@ -2295,8 +2297,11 @@ void add_hwgenerator_randomness(const char *buffer, size_t count,
struct entropy_store *poolp = &input_pool;
if (unlikely(crng_init == 0)) {
- crng_fast_load(buffer, count);
- return;
+ size_t ret = crng_fast_load(buffer, count);
+ count -= ret;
+ buffer += ret;
+ if (!count || crng_init == 0)
+ return;
}
/* Suspend writing if we're above the trickle threshold.
--
2.34.1
From: Meng Li <[email protected]>
commit efd21e10fc3bf4c6da122470a5ae89ec4ed8d180 upstream.
When enable the kernel debug config, there is below calltrace detected:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/339
caller is debug_smp_processor_id+0x20/0x30
CPU: 9 PID: 339 Comm: cryptomgr_test Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x24/0x30
dump_stack+0xf0/0x13c
check_preemption_disabled+0x100/0x110
debug_smp_processor_id+0x20/0x30
dpaa2_caam_enqueue+0x10c/0x25c
......
cryptomgr_test+0x38/0x60
kthread+0x158/0x164
ret_from_fork+0x10/0x38
According to the comment in commit ac5d15b4519f("crypto: caam/qi2
- use affine DPIOs "), because preemption is no longer disabled
while trying to enqueue an FQID, it might be possible to run the
enqueue on a different CPU(due to migration, when in process context),
however this wouldn't be a functionality issue. But there will be
above calltrace when enable kernel debug config. So, replace this_cpu_ptr
with raw_cpu_ptr to avoid above call trace.
Fixes: ac5d15b4519f ("crypto: caam/qi2 - use affine DPIOs")
Cc: [email protected]
Signed-off-by: Meng Li <[email protected]>
Reviewed-by: Horia Geantă <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/caam/caamalg_qi2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/caam/caamalg_qi2.c
+++ b/drivers/crypto/caam/caamalg_qi2.c
@@ -5470,7 +5470,7 @@ int dpaa2_caam_enqueue(struct device *de
dpaa2_fd_set_len(&fd, dpaa2_fl_get_len(&req->fd_flt[1]));
dpaa2_fd_set_flc(&fd, req->flc_dma);
- ppriv = this_cpu_ptr(priv->ppriv);
+ ppriv = raw_cpu_ptr(priv->ppriv);
for (i = 0; i < (priv->dpseci_attr.num_tx_queues << 1); i++) {
err = dpaa2_io_service_enqueue_fq(ppriv->dpio, ppriv->req_fqid,
&fd);
From: Oleksandr Andrushchenko <[email protected]>
commit ce2f46f3531a03781181b7f4bd1ff9f8c5086e7e upstream.
While working with Xen's libxenvchan library I have faced an issue with
unmap notifications sent in wrong order if both UNMAP_NOTIFY_SEND_EVENT
and UNMAP_NOTIFY_CLEAR_BYTE were requested: first we send an event channel
notification and then clear the notification byte which renders in the below
inconsistency (cli_live is the byte which was requested to be cleared on unmap):
[ 444.514243] gntdev_put_map UNMAP_NOTIFY_SEND_EVENT map->notify.event 6
libxenvchan_is_open cli_live 1
[ 444.515239] __unmap_grant_pages UNMAP_NOTIFY_CLEAR_BYTE at 14
Thus it is not possible to reliably implement the checks like
- wait for the notification (UNMAP_NOTIFY_SEND_EVENT)
- check the variable (UNMAP_NOTIFY_CLEAR_BYTE)
because it is possible that the variable gets checked before it is cleared
by the kernel.
To fix that we need to re-order the notifications, so the variable is first
gets cleared and then the event channel notification is sent.
With this fix I can see the correct order of execution:
[ 54.522611] __unmap_grant_pages UNMAP_NOTIFY_CLEAR_BYTE at 14
[ 54.537966] gntdev_put_map UNMAP_NOTIFY_SEND_EVENT map->notify.event 6
libxenvchan_is_open cli_live 0
Cc: [email protected]
Signed-off-by: Oleksandr Andrushchenko <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/gntdev.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -250,13 +250,13 @@ void gntdev_put_map(struct gntdev_priv *
if (!refcount_dec_and_test(&map->users))
return;
+ if (map->pages && !use_ptemod)
+ unmap_grant_pages(map, 0, map->count);
+
if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT) {
notify_remote_via_evtchn(map->notify.event);
evtchn_put(map->notify.event);
}
-
- if (map->pages && !use_ptemod)
- unmap_grant_pages(map, 0, map->count);
gntdev_free_map(map);
}
From: Nathan Chancellor <[email protected]>
[ Upstream commit f2c6c22fa83ab2577619009057b3ebcb5305bb03 ]
LLVM's integrated assembler does not support 'slti <reg>, <imm>':
<instantiation>:16:12: error: invalid operand for instruction
slti $12, (0x6300 | 0x0008)
^
arch/mips/kernel/head.S:86:2: note: while in macro instantiation
kernel_entry_setup # cpu specific setup
^
<instantiation>:16:12: error: invalid operand for instruction
slti $12, (0x6300 | 0x0008)
^
arch/mips/kernel/head.S:150:2: note: while in macro instantiation
smp_slave_setup
^
To increase compatibility with LLVM's integrated assembler, use the full
form of 'slti <reg>, <reg>, <imm>', which matches the rest of
arch/mips/. This does not result in any change for GNU as.
Link: https://github.com/ClangBuiltLinux/linux/issues/1526
Reported-by: Ryutaroh Matsumoto <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/mach-loongson64/kernel-entry-init.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h
index 13373c5144f89..efb41b3519747 100644
--- a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h
@@ -32,7 +32,7 @@
nop
/* Loongson-3A R2/R3 */
andi t0, (PRID_IMP_MASK | PRID_REV_MASK)
- slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+ slti t0, t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
bnez t0, 2f
nop
1:
@@ -63,7 +63,7 @@
nop
/* Loongson-3A R2/R3 */
andi t0, (PRID_IMP_MASK | PRID_REV_MASK)
- slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+ slti t0, t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
bnez t0, 2f
nop
1:
--
2.34.1
From: Maher Sanalla <[email protected]>
[ Upstream commit f79a609ea6bf54ad2d2c24e4de4524288b221666 ]
log_max_qp in driver's default profile #2 was set to 18, but FW actually
supports 17 at the most - a situation that led to the concerning print
when the driver is loaded:
"log_max_qp value in current profile is 18, changing to HCA capabaility
limit (17)"
The expected behavior from mlx5_profile #2 is to match the maximum FW
capability in regards to log_max_qp. Thus, log_max_qp in profile #2 is
initialized to a defined static value (0xff) - which basically means that
when loading this profile, log_max_qp value will be what the currently
installed FW supports at most.
Signed-off-by: Maher Sanalla <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 92b01858d7f3e..29b7297a836a5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -97,6 +97,8 @@ enum {
MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS = 0x1,
};
+#define LOG_MAX_SUPPORTED_QPS 0xff
+
static struct mlx5_profile profile[] = {
[0] = {
.mask = 0,
@@ -108,7 +110,7 @@ static struct mlx5_profile profile[] = {
[2] = {
.mask = MLX5_PROF_MASK_QP_SIZE |
MLX5_PROF_MASK_MR_CACHE,
- .log_max_qp = 18,
+ .log_max_qp = LOG_MAX_SUPPORTED_QPS,
.mr_cache[0] = {
.size = 500,
.limit = 250
@@ -513,7 +515,9 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
to_fw_pkey_sz(dev, 128));
/* Check log_max_qp from HCA caps to set in current profile */
- if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < prof->log_max_qp) {
+ if (prof->log_max_qp == LOG_MAX_SUPPORTED_QPS) {
+ prof->log_max_qp = MLX5_CAP_GEN_MAX(dev, log_max_qp);
+ } else if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < prof->log_max_qp) {
mlx5_core_warn(dev, "log_max_qp value in current profile is %d, changing it to HCA capability limit (%d)\n",
prof->log_max_qp,
MLX5_CAP_GEN_MAX(dev, log_max_qp));
--
2.34.1
From: James Smart <[email protected]>
[ Upstream commit 7dd2e2a923173d637c272e483966be8e96a72b64 ]
Extraneous teardown routines are present in the firmware dump path causing
altered states in firmware captures.
When a firmware dump is requested via sysfs, trigger the dump immediately
without tearing down structures and changing adapter state.
The driver shall rely on pre-existing firmware error state clean up
handlers to restore the adapter.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc.h | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 62 ++++++++++++++++++++------------
drivers/scsi/lpfc/lpfc_hbadisc.c | 8 ++++-
drivers/scsi/lpfc/lpfc_sli.c | 6 ----
4 files changed, 48 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index befeb7c342903..19fd9d263f47f 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1022,7 +1022,6 @@ struct lpfc_hba {
#define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */
#define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */
#define HBA_IOQ_FLUSH 0x8000 /* FCP/NVME I/O queues being flushed */
-#define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */
#define HBA_RECOVERABLE_UE 0x20000 /* Firmware supports recoverable UE */
#define HBA_FORCED_LINK_SPEED 0x40000 /*
* Firmware supports Forced Link Speed
@@ -1038,6 +1037,7 @@ struct lpfc_hba {
#define HBA_HBEAT_TMO 0x8000000 /* HBEAT initiated after timeout */
#define HBA_FLOGI_OUTSTANDING 0x10000000 /* FLOGI is outstanding */
+ struct completion *fw_dump_cmpl; /* cmpl event tracker for fw_dump */
uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
struct lpfc_dmabuf slim2p;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index ebe417921dac0..f20c4fe1fb8b9 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1709,25 +1709,25 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
before_fc_flag = phba->pport->fc_flag;
sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn;
- /* Disable SR-IOV virtual functions if enabled */
- if (phba->cfg_sriov_nr_virtfn) {
- pci_disable_sriov(pdev);
- phba->cfg_sriov_nr_virtfn = 0;
- }
+ if (opcode == LPFC_FW_DUMP) {
+ init_completion(&online_compl);
+ phba->fw_dump_cmpl = &online_compl;
+ } else {
+ /* Disable SR-IOV virtual functions if enabled */
+ if (phba->cfg_sriov_nr_virtfn) {
+ pci_disable_sriov(pdev);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
- if (opcode == LPFC_FW_DUMP)
- phba->hba_flag |= HBA_FW_DUMP_OP;
+ status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
- status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
+ if (status != 0)
+ return status;
- if (status != 0) {
- phba->hba_flag &= ~HBA_FW_DUMP_OP;
- return status;
+ /* wait for the device to be quiesced before firmware reset */
+ msleep(100);
}
- /* wait for the device to be quiesced before firmware reset */
- msleep(100);
-
reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
LPFC_CTL_PDEV_CTL_OFFSET);
@@ -1756,24 +1756,42 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"3153 Fail to perform the requested "
"access: x%x\n", reg_val);
+ if (phba->fw_dump_cmpl)
+ phba->fw_dump_cmpl = NULL;
return rc;
}
/* keep the original port state */
- if (before_fc_flag & FC_OFFLINE_MODE)
- goto out;
-
- init_completion(&online_compl);
- job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
- LPFC_EVT_ONLINE);
- if (!job_posted)
+ if (before_fc_flag & FC_OFFLINE_MODE) {
+ if (phba->fw_dump_cmpl)
+ phba->fw_dump_cmpl = NULL;
goto out;
+ }
- wait_for_completion(&online_compl);
+ /* Firmware dump will trigger an HA_ERATT event, and
+ * lpfc_handle_eratt_s4 routine already handles bringing the port back
+ * online.
+ */
+ if (opcode == LPFC_FW_DUMP) {
+ wait_for_completion(phba->fw_dump_cmpl);
+ } else {
+ init_completion(&online_compl);
+ job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_ONLINE);
+ if (!job_posted)
+ goto out;
+ wait_for_completion(&online_compl);
+ }
out:
/* in any case, restore the virtual functions enabled as before */
if (sriov_nr_virtfn) {
+ /* If fw_dump was performed, first disable to clean up */
+ if (opcode == LPFC_FW_DUMP) {
+ pci_disable_sriov(pdev);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
+
sriov_err =
lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn);
if (!sriov_err)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 9ccb904e35fcf..3bb7c2aa949f7 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -869,10 +869,16 @@ lpfc_work_done(struct lpfc_hba *phba)
if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
lpfc_sli4_post_async_mbox(phba);
- if (ha_copy & HA_ERATT)
+ if (ha_copy & HA_ERATT) {
/* Handle the error attention event */
lpfc_handle_eratt(phba);
+ if (phba->fw_dump_cmpl) {
+ complete(phba->fw_dump_cmpl);
+ phba->fw_dump_cmpl = NULL;
+ }
+ }
+
if (ha_copy & HA_MBATT)
lpfc_sli_handle_mb_event(phba);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 9c1f485952ef7..e5009f21d97e1 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -5043,12 +5043,6 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
phba->fcf.fcf_flag = 0;
spin_unlock_irq(&phba->hbalock);
- /* SLI4 INTF 2: if FW dump is being taken skip INIT_PORT */
- if (phba->hba_flag & HBA_FW_DUMP_OP) {
- phba->hba_flag &= ~HBA_FW_DUMP_OP;
- return rc;
- }
-
/* Now physically reset the device */
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0389 Performing PCI function reset!\n");
--
2.34.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit d751939235b9b7bc4af15f90a3e99288a8b844a7 ]
Make sure ->dax_dev is NULL on error so that the cleanup path doesn't
trip over an ERR_PTR.
Reported-by: Dan Williams <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 76d9da49fda75..671bb454f1649 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1794,8 +1794,10 @@ static struct mapped_device *alloc_dev(int minor)
if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
md->dax_dev = alloc_dax(md, md->disk->disk_name,
&dm_dax_ops, 0);
- if (IS_ERR(md->dax_dev))
+ if (IS_ERR(md->dax_dev)) {
+ md->dax_dev = NULL;
goto bad;
+ }
}
format_dev_t(md->name, MKDEV(_major, minor));
--
2.34.1
From: Lukas Wunner <[email protected]>
[ Upstream commit e368cc656fd6d0075f1c3ab9676e2001451e3e04 ]
pl011_set_termios() briefly resets the CR register to zero, thereby
glitching DTR/RTS signals. With rs485 this may result in the bus being
occupied for no reason.
Where does this register write originate from?
The PL011 driver was forked from the PL010 driver in 2004:
https://git.kernel.org/history/history/c/157c0342e591
Until this commit, the PL010 driver's IRQ handler ambauart_int()
modified the CR register without holding the port spinlock.
ambauart_set_termios() also modified that register. To prevent
concurrent read-modify-writes by the IRQ handler and to prevent
transmission while changing baudrate, ambauart_set_termios() had to
disable interrupts. On the PL010, that is achieved by writing zero to
the CR register.
However, on the PL011, interrupts are disabled in the IMSC register,
not in the CR register.
Additionally, the commit amended both the PL010 and PL011 driver to
acquire the port spinlock in the IRQ handler, obviating the need to
disable interrupts in ->set_termios().
So the CR register write is obsolete for two reasons. Drop it.
Cc: Russell King <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Link: https://lore.kernel.org/r/f49f945375f5ccb979893c49f1129f51651ac738.1641129062.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/amba-pl011.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b831d4d64c0a2..6ec34260d6b18 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2105,9 +2105,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
if (port->rs485.flags & SER_RS485_ENABLED)
termios->c_cflag &= ~CRTSCTS;
- /* first, disable everything */
old_cr = pl011_read(uap, REG_CR);
- pl011_write(0, uap, REG_CR);
if (termios->c_cflag & CRTSCTS) {
if (old_cr & UART011_CR_RTS)
--
2.34.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 86192251033308bb42f1e9813c962989d8ed07ec ]
For some reason we never set the size for nvmem sysfs binary file.
Set this.
Reported-by: Gilles BULOZ <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvmem/core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 8976da38b375a..9aecb83021a2d 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -307,6 +307,8 @@ static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
struct device *dev = kobj_to_dev(kobj);
struct nvmem_device *nvmem = to_nvmem_device(dev);
+ attr->size = nvmem->size;
+
return nvmem_bin_attr_get_umode(nvmem);
}
--
2.34.1
From: Michael Ellerman <[email protected]>
[ Upstream commit a4ac0d249a5db80e79d573db9e4ad29354b643a8 ]
setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.
Fixes the following W=1 warning when CONFIG_PROFILING=n:
linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/smp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 605bab448f847..c7ef0739c8640 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1640,10 +1640,12 @@ void start_secondary(void *unused)
BUG();
}
+#ifdef CONFIG_PROFILING
int setup_profiling_timer(unsigned int multiplier)
{
return 0;
}
+#endif
static void fixup_topology(void)
{
--
2.34.1
From: Heiner Kallweit <[email protected]>
[ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ]
If an invalid block size is provided, reject it instead of silently
changing it to a supported value. Especially critical I see the case of
a write transfer with block length 0. In this case we have no guarantee
that the byte we would write is valid. When silently reducing a read to
32 bytes then we don't return an error and the caller may falsely
assume that we returned the full requested data.
If this change should break any (broken) caller, then I think we should
fix the caller.
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-i801.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 1f929e6c30bea..98e39a17fb830 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -763,6 +763,11 @@ static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *
int result = 0;
unsigned char hostc;
+ if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (read_write == I2C_SMBUS_WRITE) {
/* set I2C_EN bit in configuration register */
@@ -776,16 +781,6 @@ static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *
}
}
- if (read_write == I2C_SMBUS_WRITE
- || command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (data->block[0] < 1)
- data->block[0] = 1;
- if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
- data->block[0] = I2C_SMBUS_BLOCK_MAX;
- } else {
- data->block[0] = 32; /* max for SMBus block reads */
- }
-
/* Experience has shown that the block buffer can only be used for
SMBus (not I2C) block transactions, even though the datasheet
doesn't mention this limitation. */
--
2.34.1
From: Zack Rusin <[email protected]>
[ Upstream commit f6be23264bbac88d1e2bb39658e1b8a397e3f46d ]
For larger (bigger than a page) and noncontiguous mobs we have
to create page tables that allow the host to find the memory.
Those page tables just used regular system memory. Unfortunately
in TTM those BO's are not allowed to be busy thus can't be
fenced and we have to fence those bo's because we don't want
to destroy the page tables while the host is still executing
the command buffers which might be accessing them.
To solve it we introduce a new placement VMW_PL_SYSTEM which
is very similar to TTM_PL_SYSTEM except that it allows
fencing. This fixes kernel oops'es during unloading of the driver
(and pci hot remove/add) which were caused by busy BO's in
TTM_PL_SYSTEM being present in the delayed deletion list in
TTM (TTM_PL_SYSTEM manager is destroyed before the delayed
deletions are executed)
Signed-off-by: Zack Rusin <[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Cc: Christian König <[email protected]>
Cc: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vmwgfx/Makefile | 2 +-
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 14 ++-
drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 12 ++-
.../gpu/drm/vmwgfx/vmwgfx_system_manager.c | 90 +++++++++++++++++++
drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c | 58 ++++++------
5 files changed, 138 insertions(+), 38 deletions(-)
create mode 100644 drivers/gpu/drm/vmwgfx/vmwgfx_system_manager.c
diff --git a/drivers/gpu/drm/vmwgfx/Makefile b/drivers/gpu/drm/vmwgfx/Makefile
index bc323f7d40321..0188a312c38c2 100644
--- a/drivers/gpu/drm/vmwgfx/Makefile
+++ b/drivers/gpu/drm/vmwgfx/Makefile
@@ -9,7 +9,7 @@ vmwgfx-y := vmwgfx_execbuf.o vmwgfx_gmr.o vmwgfx_kms.o vmwgfx_drv.o \
vmwgfx_cotable.o vmwgfx_so.o vmwgfx_binding.o vmwgfx_msg.o \
vmwgfx_simple_resource.o vmwgfx_va.o vmwgfx_blit.o \
vmwgfx_validation.o vmwgfx_page_dirty.o vmwgfx_streamoutput.o \
- vmwgfx_devcaps.o ttm_object.o ttm_memory.o
+ vmwgfx_devcaps.o ttm_object.o ttm_memory.o vmwgfx_system_manager.o
vmwgfx-$(CONFIG_DRM_FBDEV_EMULATION) += vmwgfx_fb.o
vmwgfx-$(CONFIG_TRANSPARENT_HUGEPAGE) += vmwgfx_thp.o
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 8d0b083ba267f..daf65615308ad 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -1071,6 +1071,12 @@ static int vmw_driver_load(struct vmw_private *dev_priv, u32 pci_id)
"3D will be disabled.\n");
dev_priv->has_mob = false;
}
+ if (vmw_sys_man_init(dev_priv) != 0) {
+ drm_info(&dev_priv->drm,
+ "No MOB page table memory available. "
+ "3D will be disabled.\n");
+ dev_priv->has_mob = false;
+ }
}
if (dev_priv->has_mob && (dev_priv->capabilities & SVGA_CAP_DX)) {
@@ -1121,8 +1127,10 @@ out_no_fifo:
vmw_overlay_close(dev_priv);
vmw_kms_close(dev_priv);
out_no_kms:
- if (dev_priv->has_mob)
+ if (dev_priv->has_mob) {
vmw_gmrid_man_fini(dev_priv, VMW_PL_MOB);
+ vmw_sys_man_fini(dev_priv);
+ }
if (dev_priv->has_gmr)
vmw_gmrid_man_fini(dev_priv, VMW_PL_GMR);
vmw_devcaps_destroy(dev_priv);
@@ -1172,8 +1180,10 @@ static void vmw_driver_unload(struct drm_device *dev)
vmw_gmrid_man_fini(dev_priv, VMW_PL_GMR);
vmw_release_device_early(dev_priv);
- if (dev_priv->has_mob)
+ if (dev_priv->has_mob) {
vmw_gmrid_man_fini(dev_priv, VMW_PL_MOB);
+ vmw_sys_man_fini(dev_priv);
+ }
vmw_devcaps_destroy(dev_priv);
vmw_vram_manager_fini(dev_priv);
ttm_device_fini(&dev_priv->bdev);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 858aff99a3fe5..645c18b267e6e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -82,8 +82,9 @@
VMWGFX_NUM_GB_SURFACE +\
VMWGFX_NUM_GB_SCREEN_TARGET)
-#define VMW_PL_GMR (TTM_PL_PRIV + 0)
-#define VMW_PL_MOB (TTM_PL_PRIV + 1)
+#define VMW_PL_GMR (TTM_PL_PRIV + 0)
+#define VMW_PL_MOB (TTM_PL_PRIV + 1)
+#define VMW_PL_SYSTEM (TTM_PL_PRIV + 2)
#define VMW_RES_CONTEXT ttm_driver_type0
#define VMW_RES_SURFACE ttm_driver_type1
@@ -1039,7 +1040,6 @@ extern struct ttm_placement vmw_vram_placement;
extern struct ttm_placement vmw_vram_sys_placement;
extern struct ttm_placement vmw_vram_gmr_placement;
extern struct ttm_placement vmw_sys_placement;
-extern struct ttm_placement vmw_evictable_placement;
extern struct ttm_placement vmw_srf_placement;
extern struct ttm_placement vmw_mob_placement;
extern struct ttm_placement vmw_nonfixed_placement;
@@ -1251,6 +1251,12 @@ int vmw_overlay_num_free_overlays(struct vmw_private *dev_priv);
int vmw_gmrid_man_init(struct vmw_private *dev_priv, int type);
void vmw_gmrid_man_fini(struct vmw_private *dev_priv, int type);
+/**
+ * System memory manager
+ */
+int vmw_sys_man_init(struct vmw_private *dev_priv);
+void vmw_sys_man_fini(struct vmw_private *dev_priv);
+
/**
* Prime - vmwgfx_prime.c
*/
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_system_manager.c b/drivers/gpu/drm/vmwgfx/vmwgfx_system_manager.c
new file mode 100644
index 0000000000000..b0005b03a6174
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_system_manager.c
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright 2021 VMware, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include "vmwgfx_drv.h"
+
+#include <drm/ttm/ttm_bo_driver.h>
+#include <drm/ttm/ttm_device.h>
+#include <drm/ttm/ttm_placement.h>
+#include <drm/ttm/ttm_resource.h>
+#include <linux/slab.h>
+
+
+static int vmw_sys_man_alloc(struct ttm_resource_manager *man,
+ struct ttm_buffer_object *bo,
+ const struct ttm_place *place,
+ struct ttm_resource **res)
+{
+ *res = kzalloc(sizeof(**res), GFP_KERNEL);
+ if (!*res)
+ return -ENOMEM;
+
+ ttm_resource_init(bo, place, *res);
+ return 0;
+}
+
+static void vmw_sys_man_free(struct ttm_resource_manager *man,
+ struct ttm_resource *res)
+{
+ kfree(res);
+}
+
+static const struct ttm_resource_manager_func vmw_sys_manager_func = {
+ .alloc = vmw_sys_man_alloc,
+ .free = vmw_sys_man_free,
+};
+
+int vmw_sys_man_init(struct vmw_private *dev_priv)
+{
+ struct ttm_device *bdev = &dev_priv->bdev;
+ struct ttm_resource_manager *man =
+ kzalloc(sizeof(*man), GFP_KERNEL);
+
+ if (!man)
+ return -ENOMEM;
+
+ man->use_tt = true;
+ man->func = &vmw_sys_manager_func;
+
+ ttm_resource_manager_init(man, 0);
+ ttm_set_driver_manager(bdev, VMW_PL_SYSTEM, man);
+ ttm_resource_manager_set_used(man, true);
+ return 0;
+}
+
+void vmw_sys_man_fini(struct vmw_private *dev_priv)
+{
+ struct ttm_resource_manager *man = ttm_manager_type(&dev_priv->bdev,
+ VMW_PL_SYSTEM);
+
+ ttm_resource_manager_evict_all(&dev_priv->bdev, man);
+
+ ttm_resource_manager_set_used(man, false);
+ ttm_resource_manager_cleanup(man);
+
+ ttm_set_driver_manager(&dev_priv->bdev, VMW_PL_SYSTEM, NULL);
+ kfree(man);
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c
index 8b8991e3ed2d0..450bb1e9626f7 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c
@@ -92,6 +92,13 @@ static const struct ttm_place gmr_vram_placement_flags[] = {
}
};
+static const struct ttm_place vmw_sys_placement_flags = {
+ .fpfn = 0,
+ .lpfn = 0,
+ .mem_type = VMW_PL_SYSTEM,
+ .flags = 0
+};
+
struct ttm_placement vmw_vram_gmr_placement = {
.num_placement = 2,
.placement = vram_gmr_placement_flags,
@@ -113,28 +120,11 @@ struct ttm_placement vmw_sys_placement = {
.busy_placement = &sys_placement_flags
};
-static const struct ttm_place evictable_placement_flags[] = {
- {
- .fpfn = 0,
- .lpfn = 0,
- .mem_type = TTM_PL_SYSTEM,
- .flags = 0
- }, {
- .fpfn = 0,
- .lpfn = 0,
- .mem_type = TTM_PL_VRAM,
- .flags = 0
- }, {
- .fpfn = 0,
- .lpfn = 0,
- .mem_type = VMW_PL_GMR,
- .flags = 0
- }, {
- .fpfn = 0,
- .lpfn = 0,
- .mem_type = VMW_PL_MOB,
- .flags = 0
- }
+struct ttm_placement vmw_pt_sys_placement = {
+ .num_placement = 1,
+ .placement = &vmw_sys_placement_flags,
+ .num_busy_placement = 1,
+ .busy_placement = &vmw_sys_placement_flags
};
static const struct ttm_place nonfixed_placement_flags[] = {
@@ -156,13 +146,6 @@ static const struct ttm_place nonfixed_placement_flags[] = {
}
};
-struct ttm_placement vmw_evictable_placement = {
- .num_placement = 4,
- .placement = evictable_placement_flags,
- .num_busy_placement = 1,
- .busy_placement = &sys_placement_flags
-};
-
struct ttm_placement vmw_srf_placement = {
.num_placement = 1,
.num_busy_placement = 2,
@@ -484,6 +467,9 @@ static int vmw_ttm_bind(struct ttm_device *bdev,
&vmw_be->vsgt, ttm->num_pages,
vmw_be->gmr_id);
break;
+ case VMW_PL_SYSTEM:
+ /* Nothing to be done for a system bind */
+ break;
default:
BUG();
}
@@ -507,6 +493,8 @@ static void vmw_ttm_unbind(struct ttm_device *bdev,
case VMW_PL_MOB:
vmw_mob_unbind(vmw_be->dev_priv, vmw_be->mob);
break;
+ case VMW_PL_SYSTEM:
+ break;
default:
BUG();
}
@@ -628,6 +616,7 @@ static int vmw_ttm_io_mem_reserve(struct ttm_device *bdev, struct ttm_resource *
switch (mem->mem_type) {
case TTM_PL_SYSTEM:
+ case VMW_PL_SYSTEM:
case VMW_PL_GMR:
case VMW_PL_MOB:
return 0;
@@ -674,6 +663,11 @@ static void vmw_swap_notify(struct ttm_buffer_object *bo)
(void) ttm_bo_wait(bo, false, false);
}
+static bool vmw_memtype_is_system(uint32_t mem_type)
+{
+ return mem_type == TTM_PL_SYSTEM || mem_type == VMW_PL_SYSTEM;
+}
+
static int vmw_move(struct ttm_buffer_object *bo,
bool evict,
struct ttm_operation_ctx *ctx,
@@ -684,7 +678,7 @@ static int vmw_move(struct ttm_buffer_object *bo,
struct ttm_resource_manager *new_man = ttm_manager_type(bo->bdev, new_mem->mem_type);
int ret;
- if (new_man->use_tt && new_mem->mem_type != TTM_PL_SYSTEM) {
+ if (new_man->use_tt && !vmw_memtype_is_system(new_mem->mem_type)) {
ret = vmw_ttm_bind(bo->bdev, bo->ttm, new_mem);
if (ret)
return ret;
@@ -693,7 +687,7 @@ static int vmw_move(struct ttm_buffer_object *bo,
vmw_move_notify(bo, bo->resource, new_mem);
if (old_man->use_tt && new_man->use_tt) {
- if (bo->resource->mem_type == TTM_PL_SYSTEM) {
+ if (vmw_memtype_is_system(bo->resource->mem_type)) {
ttm_bo_move_null(bo, new_mem);
return 0;
}
@@ -740,7 +734,7 @@ int vmw_bo_create_and_populate(struct vmw_private *dev_priv,
int ret;
ret = vmw_bo_create_kernel(dev_priv, bo_size,
- &vmw_sys_placement,
+ &vmw_pt_sys_placement,
&bo);
if (unlikely(ret != 0))
return ret;
--
2.34.1
From: Martin Leung <[email protected]>
[ Upstream commit 11dff0e871037a6ad978e52f826a2eb7f5fb274a ]
[Why & How]
when changing some code we accidentally
changed else if-> if. reverting that.
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Qingqing Zhuo <[email protected]>
Signed-off-by: Martin Leung <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c
index bb31541f80723..6420527fe476c 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c
@@ -306,8 +306,7 @@ void dc_destroy_clk_mgr(struct clk_mgr *clk_mgr_base)
case FAMILY_NV:
if (ASICREV_IS_SIENNA_CICHLID_P(clk_mgr_base->ctx->asic_id.hw_internal_rev)) {
dcn3_clk_mgr_destroy(clk_mgr);
- }
- if (ASICREV_IS_DIMGREY_CAVEFISH_P(clk_mgr_base->ctx->asic_id.hw_internal_rev)) {
+ } else if (ASICREV_IS_DIMGREY_CAVEFISH_P(clk_mgr_base->ctx->asic_id.hw_internal_rev)) {
dcn3_clk_mgr_destroy(clk_mgr);
}
if (ASICREV_IS_BEIGE_GOBY_P(clk_mgr_base->ctx->asic_id.hw_internal_rev)) {
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit 4492289c31364d28c2680b43b18883385a5d216c ]
Now that we restore the default or last user set exposure setting on
power_up() there is no need for the registers written by ov2680_set_fmt()
to write to the exposure register.
Not doing so fixes the exposure always being reset to the value from
the res->regs array after a set_fmt().
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/i2c/ov2680.h | 24 ----------------------
1 file changed, 24 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index 874115f35fcad..798b28e134b64 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -289,8 +289,6 @@ static struct ov2680_reg const ov2680_global_setting[] = {
*/
static struct ov2680_reg const ov2680_QCIF_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x24},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -334,8 +332,6 @@ static struct ov2680_reg const ov2680_QCIF_30fps[] = {
*/
static struct ov2680_reg const ov2680_CIF_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x24},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -377,8 +373,6 @@ static struct ov2680_reg const ov2680_CIF_30fps[] = {
*/
static struct ov2680_reg const ov2680_QVGA_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x24},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -420,8 +414,6 @@ static struct ov2680_reg const ov2680_QVGA_30fps[] = {
*/
static struct ov2680_reg const ov2680_656x496_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x24},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -463,8 +455,6 @@ static struct ov2680_reg const ov2680_656x496_30fps[] = {
*/
static struct ov2680_reg const ov2680_720x592_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x26},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0x00}, // X_ADDR_START;
{0x3802, 0x00},
@@ -508,8 +498,6 @@ static struct ov2680_reg const ov2680_720x592_30fps[] = {
*/
static struct ov2680_reg const ov2680_800x600_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x26},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0x00},
{0x3802, 0x00},
@@ -551,8 +539,6 @@ static struct ov2680_reg const ov2680_800x600_30fps[] = {
*/
static struct ov2680_reg const ov2680_720p_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -594,8 +580,6 @@ static struct ov2680_reg const ov2680_720p_30fps[] = {
*/
static struct ov2680_reg const ov2680_1296x976_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -637,8 +621,6 @@ static struct ov2680_reg const ov2680_1296x976_30fps[] = {
*/
static struct ov2680_reg const ov2680_1456x1096_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0x90},
{0x3802, 0x00},
@@ -682,8 +664,6 @@ static struct ov2680_reg const ov2680_1456x1096_30fps[] = {
static struct ov2680_reg const ov2680_1616x916_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0x00},
{0x3802, 0x00},
@@ -726,8 +706,6 @@ static struct ov2680_reg const ov2680_1616x916_30fps[] = {
#if 0
static struct ov2680_reg const ov2680_1616x1082_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0x00},
{0x3802, 0x00},
@@ -769,8 +747,6 @@ static struct ov2680_reg const ov2680_1616x1082_30fps[] = {
*/
static struct ov2680_reg const ov2680_1616x1216_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0x00},
{0x3802, 0x00},
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 71665d816214124d6bc4eb80314ac8f84ecacd78 ]
The asd->isp was referenced before checking if asd is not
NULL.
This fixes this warning:
../drivers/staging/media/atomisp/pci/atomisp_cmd.c:5548 atomisp_set_fmt_to_snr() warn: variable dereferenced before check 'asd' (see line 5540)
While here, avoid getting the pipe pointer twice.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_cmd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index 75a531667d743..1ddb9c815a3cb 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -5529,8 +5529,8 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev,
unsigned int padding_w, unsigned int padding_h,
unsigned int dvs_env_w, unsigned int dvs_env_h)
{
- struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev);
+ struct atomisp_sub_device *asd = pipe->asd;
const struct atomisp_format_bridge *format;
struct v4l2_subdev_pad_config pad_cfg;
struct v4l2_subdev_state pad_state = {
@@ -5541,7 +5541,7 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev,
};
struct v4l2_mbus_framefmt *ffmt = &vformat.format;
struct v4l2_mbus_framefmt *req_ffmt;
- struct atomisp_device *isp = asd->isp;
+ struct atomisp_device *isp;
struct atomisp_input_stream_info *stream_info =
(struct atomisp_input_stream_info *)ffmt->reserved;
u16 stream_index = ATOMISP_INPUT_STREAM_GENERAL;
@@ -5555,6 +5555,8 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev,
return -EINVAL;
}
+ isp = asd->isp;
+
v4l2_fh_init(&fh.vfh, vdev);
stream_index = atomisp_source_pad_to_stream_id(asd, source_pad);
--
2.34.1
From: Shengjiu Wang <[email protected]>
[ Upstream commit f331ae5fa59fbfb748317b290648fc3f1a50d932 ]
Transfer the refined slots and slot_width to akcodec_get_mclk_rate()
for mclk calculation, otherwise the mclk frequency does not match
with the slots and slot_width for S16_LE format, because the default
slot_width is 32.
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-card.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/sound/soc/fsl/imx-card.c b/sound/soc/fsl/imx-card.c
index f6b54de76dc3c..ad15974a22c3f 100644
--- a/sound/soc/fsl/imx-card.c
+++ b/sound/soc/fsl/imx-card.c
@@ -247,13 +247,14 @@ static bool codec_is_akcodec(unsigned int type)
}
static unsigned long akcodec_get_mclk_rate(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ int slots, int slot_width)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct imx_card_data *data = snd_soc_card_get_drvdata(rtd->card);
const struct imx_card_plat_data *plat_data = data->plat_data;
struct dai_link_data *link_data = &data->link_data[rtd->num];
- unsigned int width = link_data->slots * link_data->slot_width;
+ unsigned int width = slots * slot_width;
unsigned int rate = params_rate(params);
int i;
@@ -349,7 +350,7 @@ static int imx_aif_hw_params(struct snd_pcm_substream *substream,
/* Set MCLK freq */
if (codec_is_akcodec(plat_data->type))
- mclk_freq = akcodec_get_mclk_rate(substream, params);
+ mclk_freq = akcodec_get_mclk_rate(substream, params, slots, slot_width);
else
mclk_freq = params_rate(params) * slots * slot_width;
/* Use the maximum freq from DSD512 (512*44100 = 22579200) */
--
2.34.1
From: Shengjiu Wang <[email protected]>
[ Upstream commit 3969341813eb56d2dfc39bb64229359a6ae3c195 ]
According to RM, on auto mode:
For codec AK4458 and AK4497, the lowest ratio of MLCK/FS is 256
if sample rate is 8kHz-48kHz,
For codec AK5558, the lowest ratio of MLCK/FS is 512 if sample
rate is 8kHz-48kHz.
With these setting the sound quality for 8kHz-48kHz can be improved.
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-card.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/imx-card.c b/sound/soc/fsl/imx-card.c
index ad15974a22c3f..db947180617a6 100644
--- a/sound/soc/fsl/imx-card.c
+++ b/sound/soc/fsl/imx-card.c
@@ -120,7 +120,7 @@ struct imx_card_data {
static struct imx_akcodec_fs_mul ak4458_fs_mul[] = {
/* Normal, < 32kHz */
- { .rmin = 8000, .rmax = 24000, .wmin = 1024, .wmax = 1024, },
+ { .rmin = 8000, .rmax = 24000, .wmin = 256, .wmax = 1024, },
/* Normal, 32kHz */
{ .rmin = 32000, .rmax = 32000, .wmin = 256, .wmax = 1024, },
/* Normal */
@@ -151,8 +151,8 @@ static struct imx_akcodec_fs_mul ak4497_fs_mul[] = {
* Table 7 - mapping multiplier and speed mode
* Tables 8 & 9 - mapping speed mode and LRCK fs
*/
- { .rmin = 8000, .rmax = 32000, .wmin = 1024, .wmax = 1024, }, /* Normal, <= 32kHz */
- { .rmin = 44100, .rmax = 48000, .wmin = 512, .wmax = 512, }, /* Normal */
+ { .rmin = 8000, .rmax = 32000, .wmin = 256, .wmax = 1024, }, /* Normal, <= 32kHz */
+ { .rmin = 44100, .rmax = 48000, .wmin = 256, .wmax = 512, }, /* Normal */
{ .rmin = 88200, .rmax = 96000, .wmin = 256, .wmax = 256, }, /* Double */
{ .rmin = 176400, .rmax = 192000, .wmin = 128, .wmax = 128, }, /* Quad */
{ .rmin = 352800, .rmax = 384000, .wmin = 128, .wmax = 128, }, /* Oct */
@@ -164,7 +164,7 @@ static struct imx_akcodec_fs_mul ak4497_fs_mul[] = {
* (Table 4 from datasheet)
*/
static struct imx_akcodec_fs_mul ak5558_fs_mul[] = {
- { .rmin = 8000, .rmax = 32000, .wmin = 1024, .wmax = 1024, },
+ { .rmin = 8000, .rmax = 32000, .wmin = 512, .wmax = 1024, },
{ .rmin = 44100, .rmax = 48000, .wmin = 512, .wmax = 512, },
{ .rmin = 88200, .rmax = 96000, .wmin = 256, .wmax = 256, },
{ .rmin = 176400, .rmax = 192000, .wmin = 128, .wmax = 128, },
--
2.34.1
From: Ben Skeggs <[email protected]>
[ Upstream commit 1d2271d2fb85e54bfc9630a6c30ac0feb9ffb983 ]
There have been reports of the WFI timing out on some boards, and a
patch was proposed to just remove it. This stuff is rather fragile,
and I believe the WFI might be needed with our FW prior to GM200.
However, we probably should not be touching PMU during init on GPUs
where we depend on NVIDIA FW, outside of limited circumstances, so
this should be a somewhat safer change that achieves the desired
result.
Reported-by: Diego Viola <[email protected]>
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Sasha Levin <[email protected]>
---
.../gpu/drm/nouveau/nvkm/subdev/pmu/base.c | 37 +++++++++++--------
1 file changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
index 24382875fb4f3..455e95a89259f 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
@@ -94,20 +94,13 @@ nvkm_pmu_fini(struct nvkm_subdev *subdev, bool suspend)
return 0;
}
-static int
+static void
nvkm_pmu_reset(struct nvkm_pmu *pmu)
{
struct nvkm_device *device = pmu->subdev.device;
if (!pmu->func->enabled(pmu))
- return 0;
-
- /* Inhibit interrupts, and wait for idle. */
- nvkm_wr32(device, 0x10a014, 0x0000ffff);
- nvkm_msec(device, 2000,
- if (!nvkm_rd32(device, 0x10a04c))
- break;
- );
+ return;
/* Reset. */
if (pmu->func->reset)
@@ -118,25 +111,37 @@ nvkm_pmu_reset(struct nvkm_pmu *pmu)
if (!(nvkm_rd32(device, 0x10a10c) & 0x00000006))
break;
);
-
- return 0;
}
static int
nvkm_pmu_preinit(struct nvkm_subdev *subdev)
{
struct nvkm_pmu *pmu = nvkm_pmu(subdev);
- return nvkm_pmu_reset(pmu);
+ nvkm_pmu_reset(pmu);
+ return 0;
}
static int
nvkm_pmu_init(struct nvkm_subdev *subdev)
{
struct nvkm_pmu *pmu = nvkm_pmu(subdev);
- int ret = nvkm_pmu_reset(pmu);
- if (ret == 0 && pmu->func->init)
- ret = pmu->func->init(pmu);
- return ret;
+ struct nvkm_device *device = pmu->subdev.device;
+
+ if (!pmu->func->init)
+ return 0;
+
+ if (pmu->func->enabled(pmu)) {
+ /* Inhibit interrupts, and wait for idle. */
+ nvkm_wr32(device, 0x10a014, 0x0000ffff);
+ nvkm_msec(device, 2000,
+ if (!nvkm_rd32(device, 0x10a04c))
+ break;
+ );
+
+ nvkm_pmu_reset(pmu);
+ }
+
+ return pmu->func->init(pmu);
}
static void *
--
2.34.1
From: Martyn Welch <[email protected]>
[ Upstream commit 11632d4aa2b3f126790e81a4415d6c23103cf8bb ]
In the configuration used by the b850v3, the STDP2690 is used to read EDID
data whilst it's the STDP4028 which can detect when monitors are connected.
This can result in problems at boot with monitors connected when the
STDP4028 is probed first, a monitor is detected and an attempt is made to
read the EDID data before the STDP2690 has probed:
[ 3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018
[ 3.803845] pgd = (ptrval)
[ 3.806581] [00000018] *pgd=00000000
[ 3.810180] Internal error: Oops: 5 [#1] SMP ARM
[ 3.814813] Modules linked in:
[ 3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1
[ 3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 3.830705] Workqueue: events_unbound deferred_probe_work_func
[ 3.836565] PC is at stdp2690_get_edid+0x44/0x19c
[ 3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c
[ 3.846526] pc : [<805eae10>] lr : [<805eb138>] psr: 80000013
[ 3.852802] sp : 81c359d0 ip : 7dbb550b fp : 81c35a1c
[ 3.858037] r10: 81c73840 r9 : 81c73894 r8 : 816d9800
[ 3.863270] r7 : 00000000 r6 : 81c34000 r5 : 00000000 r4 : 810c35f0
[ 3.869808] r3 : 80e3e294 r2 : 00000080 r1 : 00000cc0 r0 : 81401180
[ 3.876349] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 3.883499] Control: 10c5387d Table: 1000404a DAC: 00000051
[ 3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0
[ 3.897034] Register r1 information: non-paged memory
[ 3.902097] Register r2 information: non-paged memory
[ 3.907160] Register r3 information: non-slab/vmalloc memory
[ 3.912832] Register r4 information: non-slab/vmalloc memory
[ 3.918503] Register r5 information: NULL pointer
[ 3.923217] Register r6 information: non-slab/vmalloc memory
[ 3.928887] Register r7 information: NULL pointer
[ 3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024
[ 3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048
[ 3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048
[ 3.959873] Register r11 information: non-slab/vmalloc memory
[ 3.965632] Register r12 information: non-paged memory
[ 3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval))
[ 3.977148] Stack: (0x81c359d0 to 0x81c36000)
[ 3.981517] 59c0: 80b2b668 80b2b5bc 000002e2 0000034e
[ 3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0
[ 3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8
[ 4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848
[ 4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800
[ 4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000
[ 4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000
[ 4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8
[ 4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0
[ 4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950
[ 4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059
[ 4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400
[ 4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008
[ 4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340
[ 4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000
[ 4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4
[ 4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40
[ 4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800
[ 4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28
[ 4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700
[ 4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68
[ 4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88
[ 4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0
[ 4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60
[ 4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58
[ 4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c
[ 4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800
[ 4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48
[ 4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c
[ 4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90
[ 4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0
[ 4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8
[ 4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c
[ 4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810
[ 4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c
[ 4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c
[ 4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68
[ 4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080
[ 4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650
[ 4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90
[ 4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800
[ 4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc
[ 4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18
[ 4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298
[ 4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000
[ 4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20
[ 4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000
[ 4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000
[ 4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 4.391155] Backtrace:
[ 4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c)
[ 4.402691] r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840
[ 4.410534] r4:810c35f0
[ 4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c)
[ 4.424240] r5:00000045 r4:810c35f0
[ 4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384)
[ 4.439074] r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8
[ 4.446917] r4:00000008
[ 4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4)
[ 4.460713] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010
[ 4.468556] r4:81fbb700
[ 4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0)
[ 4.482434] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800
[ 4.490276] r4:81fbb700
[ 4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4)
[ 4.502494] r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800
[ 4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130)
[ 4.516805] r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800
[ 4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0)
[ 4.531116] r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240
[ 4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184)
[ 4.545597] r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80
[ 4.553440] r4:81fe9740
[ 4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20)
[ 4.563921] r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440
[ 4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8)
[ 4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8)
[ 4.585908] r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000
[ 4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460)
[ 4.601524] r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810
[ 4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230)
[ 4.615658] r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810
[ 4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0)
[ 4.630313] r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310
[ 4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c)
[ 4.647227] r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001
[ 4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8)
[ 4.663794] r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000
[ 4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190)
[ 4.677753] r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810
[ 4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20)
[ 4.691971] r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080
[ 4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c)
[ 4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0)
[ 4.716305] r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080
[ 4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c)
[ 4.731139] r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00
[ 4.738981] r4:810c50c0 r3:80615bc0
[ 4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570)
[ 4.750765] r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800
[ 4.758608] r4:817eeb00
[ 4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190)
[ 4.768574] r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00
[ 4.776417] r4:817efa40
[ 4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24)
[ 4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8)
[ 4.791266] 5fa0: 00000000 00000000 00000000 00000000
[ 4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 4.814279] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8
[ 4.822120] r4:817efa40
[ 4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018)
Split the registration from the STDP4028 probe routine and only perform
registration once both the STDP4028 and STDP2690 have probed.
Signed-off-by: Martyn Welch <[email protected]>
CC: Peter Senna Tschudin <[email protected]>
CC: Martyn Welch <[email protected]>
CC: Neil Armstrong <[email protected]>
CC: Robert Foss <[email protected]>
CC: Laurent Pinchart <[email protected]>
CC: Jonas Karlman <[email protected]>
CC: Jernej Skrabec <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com
Signed-off-by: Sasha Levin <[email protected]>
---
.../bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 40 +++++++++++++------
1 file changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
index d2808c4a6fb1c..cce98bf2a4e73 100644
--- a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
+++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
@@ -306,19 +306,10 @@ out:
mutex_unlock(&ge_b850v3_lvds_dev_mutex);
}
-static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
- const struct i2c_device_id *id)
+static int ge_b850v3_register(void)
{
+ struct i2c_client *stdp4028_i2c = ge_b850v3_lvds_ptr->stdp4028_i2c;
struct device *dev = &stdp4028_i2c->dev;
- int ret;
-
- ret = ge_b850v3_lvds_init(dev);
-
- if (ret)
- return ret;
-
- ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
- i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
/* drm bridge initialization */
ge_b850v3_lvds_ptr->bridge.funcs = &ge_b850v3_lvds_funcs;
@@ -343,6 +334,27 @@ static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
"ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr);
}
+static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &stdp4028_i2c->dev;
+ int ret;
+
+ ret = ge_b850v3_lvds_init(dev);
+
+ if (ret)
+ return ret;
+
+ ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
+ i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
+
+ /* Only register after both bridges are probed */
+ if (!ge_b850v3_lvds_ptr->stdp2690_i2c)
+ return 0;
+
+ return ge_b850v3_register();
+}
+
static int stdp4028_ge_b850v3_fw_remove(struct i2c_client *stdp4028_i2c)
{
ge_b850v3_lvds_remove();
@@ -386,7 +398,11 @@ static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
- return 0;
+ /* Only register after both bridges are probed */
+ if (!ge_b850v3_lvds_ptr->stdp4028_i2c)
+ return 0;
+
+ return ge_b850v3_register();
}
static int stdp2690_ge_b850v3_fw_remove(struct i2c_client *stdp2690_i2c)
--
2.34.1
From: Kurt Kanzenbach <[email protected]>
[ Upstream commit cad1798d2d0811ded37d1e946c6796102e58013b ]
Allow PTP peer delay measurements on blocked ports by STP. In case of topology
changes the PTP stack can directly start with the correct delays.
Fixes: ddd56dfe52c9 ("net: dsa: hellcreek: Add PTP clock support")
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/hirschmann/hellcreek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 1469e41f2045a..2dd1227e0c357 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -1069,7 +1069,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek)
.portmask = 0x03, /* Management ports */
.age = 0,
.is_obt = 0,
- .pass_blocked = 0,
+ .pass_blocked = 1,
.is_static = 1,
.reprio_tc = 6, /* TC: 6 as per IEEE 802.1AS */
.reprio_en = 1,
--
2.34.1
From: Alexey Kardashevskiy <[email protected]>
[ Upstream commit 792020907b11c6f9246c21977cab3bad985ae4b6 ]
H_COPY_TOFROM_GUEST is an hcall for an upper level VM to access its nested
VMs memory. The userspace can trigger WARN_ON_ONCE(!(gfp & __GFP_NOWARN))
in __alloc_pages() by constructing a tiny VM which only does
H_COPY_TOFROM_GUEST with a too big GPR9 (number of bytes to copy).
This silences the warning by adding __GFP_NOWARN.
Spotted by syzkaller.
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Reviewed-by: Fabiano Rosas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/book3s_hv_nested.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index ed8a2c9f56299..89295b52a97c3 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -582,7 +582,7 @@ long kvmhv_copy_tofrom_guest_nested(struct kvm_vcpu *vcpu)
if (eaddr & (0xFFFUL << 52))
return H_PARAMETER;
- buf = kzalloc(n, GFP_KERNEL);
+ buf = kzalloc(n, GFP_KERNEL | __GFP_NOWARN);
if (!buf)
return H_NO_MEM;
--
2.34.1
From: Jiri Slaby <[email protected]>
[ Upstream commit 274ab58dc2b460cc474ffc7ccfcede4b2be1a3f5 ]
The others are superfluous with tty refcounting in place now. And they
are racy in fact:
* tty_port_initialized() reports false for a small moment after
interrupts are enabled.
* closing is 1 while the port is still alive.
The queues are flushed later during close anyway. So there is no need
for this special handling. Actually, the ISR should not flush the
queues. It should behave as every other driver, just queue the chars
into tty buffer and go on. But this will be changed later. There is
still a lot code depending on having tty in ISR (and not only tty_port).
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/mxser.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 1216f3985e18e..da375851af4e6 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -261,7 +261,6 @@ struct mxser_port {
unsigned int xmit_head;
unsigned int xmit_tail;
unsigned int xmit_cnt;
- int closing;
spinlock_t slock;
};
@@ -923,7 +922,6 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
return;
if (tty_port_close_start(port, tty, filp) == 0)
return;
- info->closing = 1;
mutex_lock(&port->mutex);
mxser_close_port(port);
mxser_flush_buffer(tty);
@@ -932,7 +930,6 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
mxser_shutdown_port(port);
tty_port_set_initialized(port, 0);
mutex_unlock(&port->mutex);
- info->closing = 0;
/* Right now the tty_port set is done outside of the close_end helper
as we don't yet have everyone using refcounts */
tty_port_close_end(port, tty);
@@ -1693,7 +1690,7 @@ static bool mxser_port_isr(struct mxser_port *port)
iir &= MOXA_MUST_IIR_MASK;
tty = tty_port_tty_get(&port->port);
- if (!tty || port->closing || !tty_port_initialized(&port->port)) {
+ if (!tty) {
status = inb(port->ioaddr + UART_LSR);
outb(MOXA_MUST_FCR_GDA_MODE_ENABLE | UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
--
2.34.1
From: Loic Poulain <[email protected]>
[ Upstream commit 09cab4308bf9b8076ee4a3c56015daf9ef9cb23e ]
Kernel test robot reported:drivers/net/wireless/ath/wcn36xx/smd.c:943:33:
sparse: sparse: cast truncates bits from constant value (780 becomes 80)
The 'channels' field is not a simple u8 array but an array of
channel_params. Using sizeof for retrieving the max number of
channels is then wrong.
In practice, it was not an issue, because the sizeof returned
value is 780, which is truncated in min_t (u8) to 80, which is
the value we expect...
Fix that properly using ARRAY_SIZE instead of sizeof.
Fixes: d707f812bb05 ("wcn36xx: Channel list update before hardware scan")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 0ebef42feb695..c056fae1d6418 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -943,7 +943,7 @@ int wcn36xx_smd_update_channel_list(struct wcn36xx *wcn, struct cfg80211_scan_re
INIT_HAL_MSG((*msg_body), WCN36XX_HAL_UPDATE_CHANNEL_LIST_REQ);
- msg_body->num_channel = min_t(u8, req->n_channels, sizeof(msg_body->channels));
+ msg_body->num_channel = min_t(u8, req->n_channels, ARRAY_SIZE(msg_body->channels));
for (i = 0; i < msg_body->num_channel; i++) {
struct wcn36xx_hal_channel_param *param = &msg_body->channels[i];
u32 min_power = WCN36XX_HAL_DEFAULT_MIN_POWER;
--
2.34.1
From: Conor Dooley <[email protected]>
[ Upstream commit c861c1be3897845313a0df47804b1db37c7052e1 ]
bm1880_clk_unregister_pll & bm1880_clk_unregister_div both try to
free statically allocated variables, so remove those kfrees.
For example, if we take L703 kfree(div_hw):
- div_hw is a bm1880_div_hw_clock pointer
- in bm1880_clk_register_plls this is pointed to an element of arg1:
struct bm1880_div_hw_clock *clks
- in the probe, where bm1880_clk_register_plls is called arg1 is
bm1880_div_clks, defined on L371:
static struct bm1880_div_hw_clock bm1880_div_clks[]
Signed-off-by: Conor Dooley <[email protected]>
Fixes: 1ab4601da55b ("clk: Add common clock driver for BM1880 SoC")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-bm1880.c | 20 ++------------------
1 file changed, 2 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/clk-bm1880.c b/drivers/clk/clk-bm1880.c
index e6d6599d310a1..fad78a22218e8 100644
--- a/drivers/clk/clk-bm1880.c
+++ b/drivers/clk/clk-bm1880.c
@@ -522,14 +522,6 @@ static struct clk_hw *bm1880_clk_register_pll(struct bm1880_pll_hw_clock *pll_cl
return hw;
}
-static void bm1880_clk_unregister_pll(struct clk_hw *hw)
-{
- struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
-
- clk_hw_unregister(hw);
- kfree(pll_hw);
-}
-
static int bm1880_clk_register_plls(struct bm1880_pll_hw_clock *clks,
int num_clks,
struct bm1880_clock_data *data)
@@ -555,7 +547,7 @@ static int bm1880_clk_register_plls(struct bm1880_pll_hw_clock *clks,
err_clk:
while (i--)
- bm1880_clk_unregister_pll(data->hw_data.hws[clks[i].pll.id]);
+ clk_hw_unregister(data->hw_data.hws[clks[i].pll.id]);
return PTR_ERR(hw);
}
@@ -695,14 +687,6 @@ static struct clk_hw *bm1880_clk_register_div(struct bm1880_div_hw_clock *div_cl
return hw;
}
-static void bm1880_clk_unregister_div(struct clk_hw *hw)
-{
- struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
-
- clk_hw_unregister(hw);
- kfree(div_hw);
-}
-
static int bm1880_clk_register_divs(struct bm1880_div_hw_clock *clks,
int num_clks,
struct bm1880_clock_data *data)
@@ -729,7 +713,7 @@ static int bm1880_clk_register_divs(struct bm1880_div_hw_clock *clks,
err_clk:
while (i--)
- bm1880_clk_unregister_div(data->hw_data.hws[clks[i].div.id]);
+ clk_hw_unregister(data->hw_data.hws[clks[i].div.id]);
return PTR_ERR(hw);
}
--
2.34.1
From: Frederic Weisbecker <[email protected]>
[ Upstream commit 81f6d49cce2d2fe507e3fddcc4a6db021d9c2e7b ]
Expedited RCU grace periods invoke sync_rcu_exp_select_node_cpus(), which
takes two passes over the leaf rcu_node structure's CPUs. The first
pass gathers up the current CPU and CPUs that are in dynticks idle mode.
The workqueue will report a quiescent state on their behalf later.
The second pass sends IPIs to the rest of the CPUs, but excludes the
current CPU, incorrectly assuming it has been included in the first
pass's list of CPUs.
Unfortunately the current CPU may have changed between the first and
second pass, due to the fact that the various rcu_node structures'
->lock fields have been dropped, thus momentarily enabling preemption.
This means that if the second pass's CPU was not on the first pass's
list, it will be ignored completely. There will be no IPI sent to
it, and there will be no reporting of quiescent states on its behalf.
Unfortunately, the expedited grace period will nevertheless be waiting
for that CPU to report a quiescent state, but with that CPU having no
reason to believe that such a report is needed.
The result will be an expedited grace period stall.
Fix this by no longer excluding the current CPU from consideration during
the second pass.
Fixes: b9ad4d6ed18e ("rcu: Avoid self-IPI in sync_rcu_exp_select_node_cpus()")
Reviewed-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Joel Fernandes <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/tree_exp.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
index 454b516ea566e..16f94118ca34b 100644
--- a/kernel/rcu/tree_exp.h
+++ b/kernel/rcu/tree_exp.h
@@ -387,6 +387,7 @@ retry_ipi:
continue;
}
if (get_cpu() == cpu) {
+ mask_ofl_test |= mask;
put_cpu();
continue;
}
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 43f0633f89947df57fe0b5025bdd741768007708 ]
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Link: https://lore.kernel.org/linux-media/[email protected]
Fixes: b0444f18e0b1 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/coda/imx-vdoa.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/coda/imx-vdoa.c b/drivers/media/platform/coda/imx-vdoa.c
index 8bc0d83718193..dd6e2e320264e 100644
--- a/drivers/media/platform/coda/imx-vdoa.c
+++ b/drivers/media/platform/coda/imx-vdoa.c
@@ -287,7 +287,11 @@ static int vdoa_probe(struct platform_device *pdev)
struct resource *res;
int ret;
- dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "DMA enable failed\n");
+ return ret;
+ }
vdoa = devm_kzalloc(&pdev->dev, sizeof(*vdoa), GFP_KERNEL);
if (!vdoa)
--
2.34.1
From: Martin Blumenstingl <[email protected]>
[ Upstream commit ff54938dd190d85f740b9bf9dde59b550936b621 ]
There are reports that 48kHz audio does not work on the WeTek Play 2
(which uses a GXBB SoC), while 44.1kHz audio works fine on the same
board. There are also reports of 48kHz audio working fine on GXL and
GXM SoCs, which are using an (almost) identical AIU (audio controller).
Experimenting has shown that MPLL0 is causing this problem. In the .dts
we have by default:
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
The MPLL0 rate is divisible by 48kHz without remainder and the MPLL1
rate is divisible by 44.1kHz without remainder. Swapping these two clock
rates "fixes" 48kHz audio but breaks 44.1kHz audio.
Everything looks normal when looking at the info provided by the common
clock framework while playing 48kHz audio (via I2S with mclk-fs = 256):
mpll_prediv 1 1 0 2000000000
mpll0_div 1 1 0 294909641
mpll0 1 1 0 294909641
cts_amclk_sel 1 1 0 294909641
cts_amclk_div 1 1 0 12287902
cts_amclk 1 1 0 12287902
meson-clk-msr however shows that the actual MPLL0 clock is off by more
than 38MHz:
mp0_out 333322917 +/-10416Hz
The rate seen by meson-clk-msr is very close to what we would get when
SDM (the fractional part) was ignored:
(2000000000Hz * 16384) / ((16384 * 6) = 333.33MHz
If SDM was considered the we should get close to:
(2000000000Hz * 16384) / ((16384 * 6) + 12808) = 294.9MHz
Further experimenting shows that HHI_MPLL_CNTL7[15] does not have any
effect on the rate of MPLL0 as seen my meson-clk-msr (regardless of
whether that bit is zero or one the rate is always the same according to
meson-clk-msr). Using HHI_MPLL_CNTL[25] on the other hand as SDM_EN
results in SDM being considered for the rate output by the hardware. The
rate - as seen by meson-clk-msr - matches with what we expect when
SDM_EN is enabled (fractional part is being considered, resulting in a
294.9MHz output) or disable (fractional part being ignored, resulting in
a 333.33MHz output).
Reported-by: Christian Hewitt <[email protected]>
Tested-by: Christian Hewitt <[email protected]>
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/meson/gxbb.c | 44 +++++++++++++++++++++++++++++++++++++---
1 file changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index d6eed760327d0..608e0e8ca49a8 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -713,6 +713,35 @@ static struct clk_regmap gxbb_mpll_prediv = {
};
static struct clk_regmap gxbb_mpll0_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .lock = &meson_clk_lock,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &gxbb_mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap gxl_mpll0_div = {
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL_CNTL7,
@@ -749,7 +778,16 @@ static struct clk_regmap gxbb_mpll0 = {
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &clk_regmap_gate_ops,
- .parent_hws = (const struct clk_hw *[]) { &gxbb_mpll0_div.hw },
+ .parent_data = &(const struct clk_parent_data) {
+ /*
+ * Note:
+ * GXL and GXBB have different SDM_EN registers. We
+ * fallback to the global naming string mechanism so
+ * mpll0_div picks up the appropriate one.
+ */
+ .name = "mpll0_div",
+ .index = -1,
+ },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
@@ -3044,7 +3082,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
[CLKID_VAPB_1] = &gxbb_vapb_1.hw,
[CLKID_VAPB_SEL] = &gxbb_vapb_sel.hw,
[CLKID_VAPB] = &gxbb_vapb.hw,
- [CLKID_MPLL0_DIV] = &gxbb_mpll0_div.hw,
+ [CLKID_MPLL0_DIV] = &gxl_mpll0_div.hw,
[CLKID_MPLL1_DIV] = &gxbb_mpll1_div.hw,
[CLKID_MPLL2_DIV] = &gxbb_mpll2_div.hw,
[CLKID_MPLL_PREDIV] = &gxbb_mpll_prediv.hw,
@@ -3439,7 +3477,7 @@ static struct clk_regmap *const gxl_clk_regmaps[] = {
&gxbb_mpll0,
&gxbb_mpll1,
&gxbb_mpll2,
- &gxbb_mpll0_div,
+ &gxl_mpll0_div,
&gxbb_mpll1_div,
&gxbb_mpll2_div,
&gxbb_cts_amclk_div,
--
2.34.1
From: Fugang Duan <[email protected]>
[ Upstream commit 028e083832b06fdeeb290e1e57dc1f6702c4c215 ]
The UCR4_OREN should be disabled before disabling the uart receiver in
.stop_rx() instead of in the .shutdown().
Otherwise, if we have the overrun error during the receiver disable
process, the overrun interrupt will keep trigging until we disable the
OREN interrupt in the .shutdown(), because the ORE status can only be
cleared when read the rx FIFO or reset the controller. Although the
called time between the receiver disable and OREN disable in .shutdown()
is very short, there is still the risk of endless interrupt during this
short period of time. So here change to disable OREN before the receiver
been disabled in .stop_rx().
Signed-off-by: Fugang Duan <[email protected]>
Signed-off-by: Sherry Sun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/imx.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 51a9f9423b1a6..7820049aba5af 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -486,18 +486,21 @@ static void imx_uart_stop_tx(struct uart_port *port)
static void imx_uart_stop_rx(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
- u32 ucr1, ucr2;
+ u32 ucr1, ucr2, ucr4;
ucr1 = imx_uart_readl(sport, UCR1);
ucr2 = imx_uart_readl(sport, UCR2);
+ ucr4 = imx_uart_readl(sport, UCR4);
if (sport->dma_is_enabled) {
ucr1 &= ~(UCR1_RXDMAEN | UCR1_ATDMAEN);
} else {
ucr1 &= ~UCR1_RRDYEN;
ucr2 &= ~UCR2_ATEN;
+ ucr4 &= ~UCR4_OREN;
}
imx_uart_writel(sport, ucr1, UCR1);
+ imx_uart_writel(sport, ucr4, UCR4);
ucr2 &= ~UCR2_RXEN;
imx_uart_writel(sport, ucr2, UCR2);
@@ -1544,7 +1547,7 @@ static void imx_uart_shutdown(struct uart_port *port)
imx_uart_writel(sport, ucr1, UCR1);
ucr4 = imx_uart_readl(sport, UCR4);
- ucr4 &= ~(UCR4_OREN | UCR4_TCEN);
+ ucr4 &= ~UCR4_TCEN;
imx_uart_writel(sport, ucr4, UCR4);
spin_unlock_irqrestore(&sport->port.lock, flags);
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit df1f679d19edb9eeb67cc2f96b29375f21991945 ]
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
BUG: key c2d00cbc has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x4c0/0xb4c
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.5-gentoo-PowerMacG4 #9
NIP: c01a9428 LR: c01a9428 CTR: 00000000
REGS: e1033cf0 TRAP: 0700 Not tainted (5.15.5-gentoo-PowerMacG4)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24002002 XER: 00000000
GPR00: c01a9428 e1033db0 c2d1cf20 00000016 00000004 00000001 c01c0630 e1033a73
GPR08: 00000000 00000000 00000000 e1033db0 24002004 00000000 f8729377 00000003
GPR16: c1829a9c 00000000 18305357 c1416fc0 c1416f80 c006ac60 c2d00ca8 c1416f00
GPR24: 00000000 c21586f0 c2160000 00000000 c2d00cbc c2170000 c216e1a0 c2160000
NIP [c01a9428] lockdep_init_map_type+0x4c0/0xb4c
LR [c01a9428] lockdep_init_map_type+0x4c0/0xb4c
Call Trace:
[e1033db0] [c01a9428] lockdep_init_map_type+0x4c0/0xb4c (unreliable)
[e1033df0] [c1c177b8] kw_i2c_add+0x334/0x424
[e1033e20] [c1c18294] pmac_i2c_init+0x9ec/0xa9c
[e1033e80] [c1c1a790] smp_core99_probe+0xbc/0x35c
[e1033eb0] [c1c03cb0] kernel_init_freeable+0x190/0x5a4
[e1033f10] [c000946c] kernel_init+0x28/0x154
[e1033f30] [c0035148] ret_from_kernel_thread+0x14/0x1c
Add missing lockdep_register_key()
Reported-by: Erhard Furtner <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/69e4f55565bb45ebb0843977801b245af0c666fe.1638264741.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/powermac/low_i2c.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 09bfe4b8f25aa..df89d916236d9 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -582,6 +582,7 @@ static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
bus->close = kw_i2c_close;
bus->xfer = kw_i2c_xfer;
mutex_init(&bus->mutex);
+ lockdep_register_key(&bus->lock_key);
lockdep_set_class(&bus->mutex, &bus->lock_key);
if (controller == busnode)
bus->flags = pmac_i2c_multibus;
--
2.34.1
From: Wang Hai <[email protected]>
[ Upstream commit 3d5831a40d3464eea158180eb12cbd81c5edfb6a ]
I got a null-ptr-deref report:
BUG: kernel NULL pointer dereference, address: 0000000000000060
...
RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270
...
Call Trace:
msi001_probe+0x13b/0x24b [msi001]
spi_probe+0xeb/0x130
...
do_syscall_64+0x35/0xb0
In msi001_probe(), if the creation of control for bandwidth_auto
fails, there will be a null-ptr-deref issue when it is used in
v4l2_ctrl_auto_cluster().
Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug.
Link: https://lore.kernel.org/linux-media/[email protected]
Fixes: 93203dd6c7c4 ("[media] msi001: Mirics MSi001 silicon tuner driver")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/tuners/msi001.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/media/tuners/msi001.c b/drivers/media/tuners/msi001.c
index 78e6fd600d8ef..44247049a3190 100644
--- a/drivers/media/tuners/msi001.c
+++ b/drivers/media/tuners/msi001.c
@@ -442,6 +442,13 @@ static int msi001_probe(struct spi_device *spi)
V4L2_CID_RF_TUNER_BANDWIDTH_AUTO, 0, 1, 1, 1);
dev->bandwidth = v4l2_ctrl_new_std(&dev->hdl, &msi001_ctrl_ops,
V4L2_CID_RF_TUNER_BANDWIDTH, 200000, 8000000, 1, 200000);
+ if (dev->hdl.error) {
+ ret = dev->hdl.error;
+ dev_err(&spi->dev, "Could not initialize controls\n");
+ /* control init failed, free handler */
+ goto err_ctrl_handler_free;
+ }
+
v4l2_ctrl_auto_cluster(2, &dev->bandwidth_auto, 0, false);
dev->lna_gain = v4l2_ctrl_new_std(&dev->hdl, &msi001_ctrl_ops,
V4L2_CID_RF_TUNER_LNA_GAIN, 0, 1, 1, 1);
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit c9e9094c4e42124af909b2f5f6ded0498e0854ac ]
The internal try_fmt logic is not meant to provide everything
that the V4L2 API should provide. Also, it doesn't decrement
the pads that are used only internally by the driver, but aren't
part of the device's output.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/atomisp_ioctl.c | 72 ++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index 29826f8e4143d..54624f8814e04 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -863,6 +863,72 @@ static int atomisp_g_fmt_file(struct file *file, void *fh,
return 0;
}
+static int atomisp_adjust_fmt(struct v4l2_format *f)
+{
+ const struct atomisp_format_bridge *format_bridge;
+ u32 padded_width;
+
+ format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+
+ padded_width = f->fmt.pix.width + pad_w;
+
+ if (format_bridge->planar) {
+ f->fmt.pix.bytesperline = padded_width;
+ f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height *
+ DIV_ROUND_UP(format_bridge->depth *
+ padded_width, 8));
+ } else {
+ f->fmt.pix.bytesperline = DIV_ROUND_UP(format_bridge->depth *
+ padded_width, 8);
+ f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height * f->fmt.pix.bytesperline);
+ }
+
+ if (f->fmt.pix.field == V4L2_FIELD_ANY)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+
+ format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+ if (!format_bridge)
+ return -EINVAL;
+
+ /* Currently, raw formats are broken!!! */
+ if (format_bridge->sh_fmt == IA_CSS_FRAME_FORMAT_RAW) {
+ f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420;
+
+ format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+ if (!format_bridge)
+ return -EINVAL;
+ }
+
+ padded_width = f->fmt.pix.width + pad_w;
+
+ if (format_bridge->planar) {
+ f->fmt.pix.bytesperline = padded_width;
+ f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height *
+ DIV_ROUND_UP(format_bridge->depth *
+ padded_width, 8));
+ } else {
+ f->fmt.pix.bytesperline = DIV_ROUND_UP(format_bridge->depth *
+ padded_width, 8);
+ f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height * f->fmt.pix.bytesperline);
+ }
+
+ if (f->fmt.pix.field == V4L2_FIELD_ANY)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+
+ /*
+ * FIXME: do we need to setup this differently, depending on the
+ * sensor or the pipeline?
+ */
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
+ f->fmt.pix.ycbcr_enc = V4L2_YCBCR_ENC_709;
+ f->fmt.pix.xfer_func = V4L2_XFER_FUNC_709;
+
+ f->fmt.pix.width -= pad_w;
+ f->fmt.pix.height -= pad_h;
+
+ return 0;
+}
+
/* This function looks up the closest available resolution. */
static int atomisp_try_fmt_cap(struct file *file, void *fh,
struct v4l2_format *f)
@@ -874,7 +940,11 @@ static int atomisp_try_fmt_cap(struct file *file, void *fh,
rt_mutex_lock(&isp->mutex);
ret = atomisp_try_fmt(vdev, &f->fmt.pix, NULL);
rt_mutex_unlock(&isp->mutex);
- return ret;
+
+ if (ret)
+ return ret;
+
+ return atomisp_adjust_fmt(f);
}
static int atomisp_s_fmt_cap(struct file *file, void *fh,
--
2.34.1
From: Chengfeng Ye <[email protected]>
[ Upstream commit a1ee1c08fcd5af03187dcd41dcab12fd5b379555 ]
cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.
Signed-off-by: Chengfeng Ye <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hsi/hsi_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hsi/hsi_core.c b/drivers/hsi/hsi_core.c
index ec90713564e32..884066109699c 100644
--- a/drivers/hsi/hsi_core.c
+++ b/drivers/hsi/hsi_core.c
@@ -102,6 +102,7 @@ struct hsi_client *hsi_new_client(struct hsi_port *port,
if (device_register(&cl->device) < 0) {
pr_err("hsi: failed to register client: %s\n", info->name);
put_device(&cl->device);
+ goto err;
}
return cl;
--
2.34.1
From: Shengjiu Wang <[email protected]>
[ Upstream commit 320386343451ab6a3577e0ee200dac56a6182944 ]
According to RM, the clock divider range is from 1 to 8, clock
prescaling ratio may be any power of 2 from 1 to 128.
So the supported divider is not all the value between
1 and 1024, just limited value in that range.
Create table for the supported divder and add function to
check the clock divider is available by comparing with
the table.
Fixes: d0250cf4f2ab ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 69 +++++++++++++++++++++++++++++++++-------
1 file changed, 58 insertions(+), 11 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 24b41881a68f8..d7d1536a4f377 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -19,6 +19,7 @@
#include "fsl_asrc.h"
#define IDEAL_RATIO_DECIMAL_DEPTH 26
+#define DIVIDER_NUM 64
#define pair_err(fmt, ...) \
dev_err(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
@@ -101,6 +102,55 @@ static unsigned char clk_map_imx8qxp[2][ASRC_CLK_MAP_LEN] = {
},
};
+/*
+ * According to RM, the divider range is 1 ~ 8,
+ * prescaler is power of 2 from 1 ~ 128.
+ */
+static int asrc_clk_divider[DIVIDER_NUM] = {
+ 1, 2, 4, 8, 16, 32, 64, 128, /* divider = 1 */
+ 2, 4, 8, 16, 32, 64, 128, 256, /* divider = 2 */
+ 3, 6, 12, 24, 48, 96, 192, 384, /* divider = 3 */
+ 4, 8, 16, 32, 64, 128, 256, 512, /* divider = 4 */
+ 5, 10, 20, 40, 80, 160, 320, 640, /* divider = 5 */
+ 6, 12, 24, 48, 96, 192, 384, 768, /* divider = 6 */
+ 7, 14, 28, 56, 112, 224, 448, 896, /* divider = 7 */
+ 8, 16, 32, 64, 128, 256, 512, 1024, /* divider = 8 */
+};
+
+/*
+ * Check if the divider is available for internal ratio mode
+ */
+static bool fsl_asrc_divider_avail(int clk_rate, int rate, int *div)
+{
+ u32 rem, i;
+ u64 n;
+
+ if (div)
+ *div = 0;
+
+ if (clk_rate == 0 || rate == 0)
+ return false;
+
+ n = clk_rate;
+ rem = do_div(n, rate);
+
+ if (div)
+ *div = n;
+
+ if (rem != 0)
+ return false;
+
+ for (i = 0; i < DIVIDER_NUM; i++) {
+ if (n == asrc_clk_divider[i])
+ break;
+ }
+
+ if (i == DIVIDER_NUM)
+ return false;
+
+ return true;
+}
+
/**
* fsl_asrc_sel_proc - Select the pre-processing and post-processing options
* @inrate: input sample rate
@@ -330,12 +380,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
enum asrc_word_width input_word_width;
enum asrc_word_width output_word_width;
u32 inrate, outrate, indiv, outdiv;
- u32 clk_index[2], div[2], rem[2];
+ u32 clk_index[2], div[2];
u64 clk_rate;
int in, out, channels;
int pre_proc, post_proc;
struct clk *clk;
- bool ideal;
+ bool ideal, div_avail;
if (!config) {
pair_err("invalid pair config\n");
@@ -415,8 +465,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
clk = asrc_priv->asrck_clk[clk_index[ideal ? OUT : IN]];
clk_rate = clk_get_rate(clk);
- rem[IN] = do_div(clk_rate, inrate);
- div[IN] = (u32)clk_rate;
+ div_avail = fsl_asrc_divider_avail(clk_rate, inrate, &div[IN]);
/*
* The divider range is [1, 1024], defined by the hardware. For non-
@@ -425,7 +474,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
* only result in different converting speeds. So remainder does not
* matter, as long as we keep the divider within its valid range.
*/
- if (div[IN] == 0 || (!ideal && (div[IN] > 1024 || rem[IN] != 0))) {
+ if (div[IN] == 0 || (!ideal && !div_avail)) {
pair_err("failed to support input sample rate %dHz by asrck_%x\n",
inrate, clk_index[ideal ? OUT : IN]);
return -EINVAL;
@@ -436,13 +485,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
clk = asrc_priv->asrck_clk[clk_index[OUT]];
clk_rate = clk_get_rate(clk);
if (ideal && use_ideal_rate)
- rem[OUT] = do_div(clk_rate, IDEAL_RATIO_RATE);
+ div_avail = fsl_asrc_divider_avail(clk_rate, IDEAL_RATIO_RATE, &div[OUT]);
else
- rem[OUT] = do_div(clk_rate, outrate);
- div[OUT] = clk_rate;
+ div_avail = fsl_asrc_divider_avail(clk_rate, outrate, &div[OUT]);
/* Output divider has the same limitation as the input one */
- if (div[OUT] == 0 || (!ideal && (div[OUT] > 1024 || rem[OUT] != 0))) {
+ if (div[OUT] == 0 || (!ideal && !div_avail)) {
pair_err("failed to support output sample rate %dHz by asrck_%x\n",
outrate, clk_index[OUT]);
return -EINVAL;
@@ -621,8 +669,7 @@ static void fsl_asrc_select_clk(struct fsl_asrc_priv *asrc_priv,
clk_index = asrc_priv->clk_map[j][i];
clk_rate = clk_get_rate(asrc_priv->asrck_clk[clk_index]);
/* Only match a perfect clock source with no remainder */
- if (clk_rate != 0 && (clk_rate / rate[j]) <= 1024 &&
- (clk_rate % rate[j]) == 0)
+ if (fsl_asrc_divider_avail(clk_rate, rate[j], NULL))
break;
}
--
2.34.1
From: Kurt Kanzenbach <[email protected]>
[ Upstream commit b7ade35eb53a2455f737a623c24e4b24455b2271 ]
Treat STP as management traffic. STP traffic is designated for the CPU port
only. In addition, STP traffic has to pass blocked ports.
Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/hirschmann/hellcreek.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 2afd6a4f02b88..1469e41f2045a 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -1074,6 +1074,17 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek)
.reprio_tc = 6, /* TC: 6 as per IEEE 802.1AS */
.reprio_en = 1,
};
+ static struct hellcreek_fdb_entry stp = {
+ /* MAC: 01-80-C2-00-00-00 */
+ .mac = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 },
+ .portmask = 0x03, /* Management ports */
+ .age = 0,
+ .is_obt = 0,
+ .pass_blocked = 1,
+ .is_static = 1,
+ .reprio_tc = 6,
+ .reprio_en = 1,
+ };
int ret;
mutex_lock(&hellcreek->reg_lock);
@@ -1081,6 +1092,9 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek)
if (ret)
goto out;
ret = __hellcreek_fdb_add(hellcreek, &p2p);
+ if (ret)
+ goto out;
+ ret = __hellcreek_fdb_add(hellcreek, &stp);
out:
mutex_unlock(&hellcreek->reg_lock);
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit eccd25136386a04ebf46a64f3a34e8e0fab6d9e1 ]
In ath11k_mac_op_hw_scan(), the return value of kzalloc() is directly
used in memcpy(), which may lead to a NULL pointer dereference on
failure of kzalloc().
Fix this bug by adding a check of arg.extraie.ptr.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_ATH11K=m show no new warnings, and our static
analyzer no longer warns about this code.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 9dfa77389c4da..f8f973ef150e2 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2580,9 +2580,12 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw,
arg.scan_id = ATH11K_SCAN_ID;
if (req->ie_len) {
+ arg.extraie.ptr = kmemdup(req->ie, req->ie_len, GFP_KERNEL);
+ if (!arg.extraie.ptr) {
+ ret = -ENOMEM;
+ goto exit;
+ }
arg.extraie.len = req->ie_len;
- arg.extraie.ptr = kzalloc(req->ie_len, GFP_KERNEL);
- memcpy(arg.extraie.ptr, req->ie, req->ie_len);
}
if (req->n_ssids) {
--
2.34.1
From: Robin Murphy <[email protected]>
[ Upstream commit 56c7c6eaf3eb8ac1ec40d56096c0f2b27250da5f ]
Attempting to migrate the PMU context after we've unregistered the PMU
device, or especially if we never successfully registered it in the
first place, is a woefully bad idea. It's also fundamentally pointless
anyway. Make sure to unregister an instance from the hotplug handler
*without* invoking the teardown callback.
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/2c221d745544774e4b07583b65b5d4d94f7e0fe4.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/perf/arm-cmn.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c
index bc3cba5f8c5dc..400eb7f579dce 100644
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -1561,7 +1561,8 @@ static int arm_cmn_probe(struct platform_device *pdev)
err = perf_pmu_register(&cmn->pmu, name, -1);
if (err)
- cpuhp_state_remove_instance(arm_cmn_hp_state, &cmn->cpuhp_node);
+ cpuhp_state_remove_instance_nocalls(arm_cmn_hp_state, &cmn->cpuhp_node);
+
return err;
}
@@ -1572,7 +1573,7 @@ static int arm_cmn_remove(struct platform_device *pdev)
writel_relaxed(0, cmn->dtc[0].base + CMN_DT_DTC_CTL);
perf_pmu_unregister(&cmn->pmu);
- cpuhp_state_remove_instance(arm_cmn_hp_state, &cmn->cpuhp_node);
+ cpuhp_state_remove_instance_nocalls(arm_cmn_hp_state, &cmn->cpuhp_node);
return 0;
}
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 4a9af6cac050dce2e895ec3205c4615383ad9112 ]
The flushing of pending work in the EC driver uses drain_workqueue()
to flush the event handling work that can requeue itself via
advance_transaction(), but this is problematic, because that
work may also be requeued from the query workqueue.
Namely, if an EC transaction is carried out during the execution of
a query handler, it involves calling advance_transaction() which
may queue up the event handling work again. This causes the kernel
to complain about attempts to add a work item to the EC event
workqueue while it is being drained and worst-case it may cause a
valid event to be skipped.
To avoid this problem, introduce two new counters, events_in_progress
and queries_in_progress, incremented when a work item is queued on
the event workqueue or the query workqueue, respectively, and
decremented at the end of the corresponding work function, and make
acpi_ec_dispatch_gpe() the workqueues in a loop until the both of
these counters are zero (or system wakeup is pending) instead of
calling acpi_ec_flush_work().
At the same time, change __acpi_ec_flush_work() to call
flush_workqueue() instead of drain_workqueue() to flush the event
workqueue.
While at it, use the observation that the work item queued in
acpi_ec_query() cannot be pending at that time, because it is used
only once, to simplify the code in there.
Additionally, clean up a comment in acpi_ec_query() and adjust white
space in acpi_ec_event_processor().
Fixes: f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/ec.c | 57 +++++++++++++++++++++++++++++++----------
drivers/acpi/internal.h | 2 ++
2 files changed, 45 insertions(+), 14 deletions(-)
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index e629e891d1bb3..9b859ff976e89 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -166,6 +166,7 @@ struct acpi_ec_query {
struct transaction transaction;
struct work_struct work;
struct acpi_ec_query_handler *handler;
+ struct acpi_ec *ec;
};
static int acpi_ec_query(struct acpi_ec *ec, u8 *data);
@@ -452,6 +453,7 @@ static void acpi_ec_submit_query(struct acpi_ec *ec)
ec_dbg_evt("Command(%s) submitted/blocked",
acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY));
ec->nr_pending_queries++;
+ ec->events_in_progress++;
queue_work(ec_wq, &ec->work);
}
}
@@ -518,7 +520,7 @@ static void acpi_ec_enable_event(struct acpi_ec *ec)
#ifdef CONFIG_PM_SLEEP
static void __acpi_ec_flush_work(void)
{
- drain_workqueue(ec_wq); /* flush ec->work */
+ flush_workqueue(ec_wq); /* flush ec->work */
flush_workqueue(ec_query_wq); /* flush queries */
}
@@ -1103,7 +1105,7 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
}
EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
-static struct acpi_ec_query *acpi_ec_create_query(u8 *pval)
+static struct acpi_ec_query *acpi_ec_create_query(struct acpi_ec *ec, u8 *pval)
{
struct acpi_ec_query *q;
struct transaction *t;
@@ -1111,11 +1113,13 @@ static struct acpi_ec_query *acpi_ec_create_query(u8 *pval)
q = kzalloc(sizeof (struct acpi_ec_query), GFP_KERNEL);
if (!q)
return NULL;
+
INIT_WORK(&q->work, acpi_ec_event_processor);
t = &q->transaction;
t->command = ACPI_EC_COMMAND_QUERY;
t->rdata = pval;
t->rlen = 1;
+ q->ec = ec;
return q;
}
@@ -1132,13 +1136,21 @@ static void acpi_ec_event_processor(struct work_struct *work)
{
struct acpi_ec_query *q = container_of(work, struct acpi_ec_query, work);
struct acpi_ec_query_handler *handler = q->handler;
+ struct acpi_ec *ec = q->ec;
ec_dbg_evt("Query(0x%02x) started", handler->query_bit);
+
if (handler->func)
handler->func(handler->data);
else if (handler->handle)
acpi_evaluate_object(handler->handle, NULL, NULL, NULL);
+
ec_dbg_evt("Query(0x%02x) stopped", handler->query_bit);
+
+ spin_lock_irq(&ec->lock);
+ ec->queries_in_progress--;
+ spin_unlock_irq(&ec->lock);
+
acpi_ec_delete_query(q);
}
@@ -1148,7 +1160,7 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 *data)
int result;
struct acpi_ec_query *q;
- q = acpi_ec_create_query(&value);
+ q = acpi_ec_create_query(ec, &value);
if (!q)
return -ENOMEM;
@@ -1170,19 +1182,20 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 *data)
}
/*
- * It is reported that _Qxx are evaluated in a parallel way on
- * Windows:
+ * It is reported that _Qxx are evaluated in a parallel way on Windows:
* https://bugzilla.kernel.org/show_bug.cgi?id=94411
*
- * Put this log entry before schedule_work() in order to make
- * it appearing before any other log entries occurred during the
- * work queue execution.
+ * Put this log entry before queue_work() to make it appear in the log
+ * before any other messages emitted during workqueue handling.
*/
ec_dbg_evt("Query(0x%02x) scheduled", value);
- if (!queue_work(ec_query_wq, &q->work)) {
- ec_dbg_evt("Query(0x%02x) overlapped", value);
- result = -EBUSY;
- }
+
+ spin_lock_irq(&ec->lock);
+
+ ec->queries_in_progress++;
+ queue_work(ec_query_wq, &q->work);
+
+ spin_unlock_irq(&ec->lock);
err_exit:
if (result)
@@ -1240,6 +1253,10 @@ static void acpi_ec_event_handler(struct work_struct *work)
ec_dbg_evt("Event stopped");
acpi_ec_check_event(ec);
+
+ spin_lock_irqsave(&ec->lock, flags);
+ ec->events_in_progress--;
+ spin_unlock_irqrestore(&ec->lock, flags);
}
static void acpi_ec_handle_interrupt(struct acpi_ec *ec)
@@ -2021,6 +2038,7 @@ void acpi_ec_set_gpe_wake_mask(u8 action)
bool acpi_ec_dispatch_gpe(void)
{
+ bool work_in_progress;
u32 ret;
if (!first_ec)
@@ -2041,8 +2059,19 @@ bool acpi_ec_dispatch_gpe(void)
if (ret == ACPI_INTERRUPT_HANDLED)
pm_pr_dbg("ACPI EC GPE dispatched\n");
- /* Flush the event and query workqueues. */
- acpi_ec_flush_work();
+ /* Drain EC work. */
+ do {
+ acpi_ec_flush_work();
+
+ pm_pr_dbg("ACPI EC work flushed\n");
+
+ spin_lock_irq(&first_ec->lock);
+
+ work_in_progress = first_ec->events_in_progress +
+ first_ec->queries_in_progress > 0;
+
+ spin_unlock_irq(&first_ec->lock);
+ } while (work_in_progress && !pm_wakeup_pending());
return false;
}
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index d91b560e88674..54b2be94d23dc 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -183,6 +183,8 @@ struct acpi_ec {
struct work_struct work;
unsigned long timestamp;
unsigned long nr_pending_queries;
+ unsigned int events_in_progress;
+ unsigned int queries_in_progress;
bool busy_polling;
unsigned int polling_guard;
};
--
2.34.1
From: Lucas De Marchi <[email protected]>
commit 9c494ca4d3a535f9ca11ad6af1813983c1c6cbdd upstream.
"Stolen memory" is memory set aside for use by an Intel integrated GPU.
The intel_graphics_quirks() early quirk reserves this memory when it is
called for a GPU that appears in the intel_early_ids[] table of integrated
GPUs.
Previously intel_graphics_quirks() was marked as QFLAG_APPLY_ONCE, so it
was called only for the first Intel GPU found. If a discrete GPU happened
to be enumerated first, intel_graphics_quirks() was called for it but not
for any integrated GPU found later. Therefore, stolen memory for such an
integrated GPU was never reserved.
For example, this problem occurs in this Alderlake-P (integrated) + DG2
(discrete) topology where the DG2 is found first, but stolen memory is
associated with the integrated GPU:
- 00:01.0 Bridge
`- 03:00.0 DG2 discrete GPU
- 00:02.0 Integrated GPU (with stolen memory)
Remove the QFLAG_APPLY_ONCE flag and call intel_graphics_quirks() for every
Intel GPU. Reserve stolen memory for the first GPU that appears in
intel_early_ids[].
[bhelgaas: commit log, add code comment, squash in
https://lore.kernel.org/r/20220118190558.2ququ4vdfjuahicm@ldmartin-desk2]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/early-quirks.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -515,6 +515,7 @@ static const struct intel_early_ops gen1
.stolen_size = gen9_stolen_size,
};
+/* Intel integrated GPUs for which we need to reserve "stolen memory" */
static const struct pci_device_id intel_early_ids[] __initconst = {
INTEL_I830_IDS(&i830_early_ops),
INTEL_I845G_IDS(&i845_early_ops),
@@ -591,6 +592,13 @@ static void __init intel_graphics_quirks
u16 device;
int i;
+ /*
+ * Reserve "stolen memory" for an integrated GPU. If we've already
+ * found one, there's nothing to do for other (discrete) GPUs.
+ */
+ if (resource_size(&intel_graphics_stolen_res))
+ return;
+
device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
for (i = 0; i < ARRAY_SIZE(intel_early_ids); i++) {
@@ -703,7 +711,7 @@ static struct chipset early_qrk[] __init
{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID,
- QFLAG_APPLY_ONCE, intel_graphics_quirks },
+ 0, intel_graphics_quirks },
/*
* HPET on the current version of the Baytrail platform has accuracy
* problems: it will halt in deep idle state - so we disable it.
From: Jisheng Zhang <[email protected]>
commit b0fd4b1bf995172b9efcee23600d4f69571c321c upstream.
Currently, if 64BIT and !XIP_KERNEL, the phys_ram_base is always 0,
no matter the real start of dram reported by memblock is.
Fixes: 6d7f91d914bc ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Signed-off-by: Jisheng Zhang <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/mm/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -187,10 +187,10 @@ static void __init setup_bootmem(void)
phys_ram_end = memblock_end_of_DRAM();
-#ifndef CONFIG_64BIT
#ifndef CONFIG_XIP_KERNEL
phys_ram_base = memblock_start_of_DRAM();
#endif
+#ifndef CONFIG_64BIT
/*
* memblock allocator is not aware of the fact that last 4K bytes of
* the addressable memory can not be mapped because of IS_ERR_VALUE
From: Mansur Alisha Shaik <[email protected]>
[ Upstream commit b1f9bb8020783a48151e3a2864fbdc70548566dd ]
In exististing implimentation, in min_loaded_core() for low_power
vpp frequency value is considering as vpp_freq instead of low_power_freq.
Fixed this by correcting vpp frequency calculation for encoder.
Fixes: 3cfe5815ce0e (media: venus: Enable low power setting for encoder)
Signed-off-by: Mansur Alisha Shaik <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/pm_helpers.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index e031fd17f4e75..d382872bc8a08 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -587,8 +587,8 @@ min_loaded_core(struct venus_inst *inst, u32 *min_coreid, u32 *min_load, bool lo
if (inst->session_type == VIDC_SESSION_TYPE_DEC)
vpp_freq = inst_pos->clk_data.vpp_freq;
else if (inst->session_type == VIDC_SESSION_TYPE_ENC)
- vpp_freq = low_power ? inst_pos->clk_data.vpp_freq :
- inst_pos->clk_data.low_power_freq;
+ vpp_freq = low_power ? inst_pos->clk_data.low_power_freq :
+ inst_pos->clk_data.vpp_freq;
else
continue;
--
2.34.1
From: Oleksij Rempel <[email protected]>
[ Upstream commit 4cf2ddf16e175ee18c5c29865c32da7d6269cf44 ]
Starting with commit d92ed2c9d3ff ("thermal: imx: Use driver's local
data to decide whether to run a measurement") this driver stared using
irq_enabled flag to make decision to power on/off the thermal
core. This triggered a regression, where after reaching critical
temperature, alarm IRQ handler set irq_enabled to false, disabled
thermal core and was not able read temperature and disable cooling
sequence.
In case the cooling device is "CPU/GPU freq", the system will run with
reduce performance until next reboot.
To solve this issue, we need to move all parts implementing hand made
runtime power management and let it handle actual runtime PM framework.
Fixes: d92ed2c9d3ff ("thermal: imx: Use driver's local data to decide whether to run a measurement")
Signed-off-by: Oleksij Rempel <[email protected]>
Tested-by: Petr Beneš <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/imx_thermal.c | 145 +++++++++++++++++++++-------------
1 file changed, 91 insertions(+), 54 deletions(-)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 2c7473d86a59b..16663373b6829 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -15,6 +15,7 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
#include <linux/nvmem-consumer.h>
+#include <linux/pm_runtime.h>
#define REG_SET 0x4
#define REG_CLR 0x8
@@ -194,6 +195,7 @@ static struct thermal_soc_data thermal_imx7d_data = {
};
struct imx_thermal_data {
+ struct device *dev;
struct cpufreq_policy *policy;
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
@@ -252,44 +254,15 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
const struct thermal_soc_data *soc_data = data->socdata;
struct regmap *map = data->tempmon;
unsigned int n_meas;
- bool wait, run_measurement;
u32 val;
+ int ret;
- run_measurement = !data->irq_enabled;
- if (!run_measurement) {
- /* Check if a measurement is currently in progress */
- regmap_read(map, soc_data->temp_data, &val);
- wait = !(val & soc_data->temp_valid_mask);
- } else {
- /*
- * Every time we measure the temperature, we will power on the
- * temperature sensor, enable measurements, take a reading,
- * disable measurements, power off the temperature sensor.
- */
- regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
- soc_data->power_down_mask);
- regmap_write(map, soc_data->sensor_ctrl + REG_SET,
- soc_data->measure_temp_mask);
-
- wait = true;
- }
-
- /*
- * According to the temp sensor designers, it may require up to ~17us
- * to complete a measurement.
- */
- if (wait)
- usleep_range(20, 50);
+ ret = pm_runtime_resume_and_get(data->dev);
+ if (ret < 0)
+ return ret;
regmap_read(map, soc_data->temp_data, &val);
- if (run_measurement) {
- regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
- soc_data->measure_temp_mask);
- regmap_write(map, soc_data->sensor_ctrl + REG_SET,
- soc_data->power_down_mask);
- }
-
if ((val & soc_data->temp_valid_mask) == 0) {
dev_dbg(&tz->device, "temp measurement never finished\n");
return -EAGAIN;
@@ -328,6 +301,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
enable_irq(data->irq);
}
+ pm_runtime_put(data->dev);
+
return 0;
}
@@ -335,24 +310,16 @@ static int imx_change_mode(struct thermal_zone_device *tz,
enum thermal_device_mode mode)
{
struct imx_thermal_data *data = tz->devdata;
- struct regmap *map = data->tempmon;
- const struct thermal_soc_data *soc_data = data->socdata;
if (mode == THERMAL_DEVICE_ENABLED) {
- regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
- soc_data->power_down_mask);
- regmap_write(map, soc_data->sensor_ctrl + REG_SET,
- soc_data->measure_temp_mask);
+ pm_runtime_get(data->dev);
if (!data->irq_enabled) {
data->irq_enabled = true;
enable_irq(data->irq);
}
} else {
- regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
- soc_data->measure_temp_mask);
- regmap_write(map, soc_data->sensor_ctrl + REG_SET,
- soc_data->power_down_mask);
+ pm_runtime_put(data->dev);
if (data->irq_enabled) {
disable_irq(data->irq);
@@ -393,6 +360,11 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
int temp)
{
struct imx_thermal_data *data = tz->devdata;
+ int ret;
+
+ ret = pm_runtime_resume_and_get(data->dev);
+ if (ret < 0)
+ return ret;
/* do not allow changing critical threshold */
if (trip == IMX_TRIP_CRITICAL)
@@ -406,6 +378,8 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
imx_set_alarm_temp(data, temp);
+ pm_runtime_put(data->dev);
+
return 0;
}
@@ -681,6 +655,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
+ data->dev = &pdev->dev;
+
map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon");
if (IS_ERR(map)) {
ret = PTR_ERR(map);
@@ -800,6 +776,16 @@ static int imx_thermal_probe(struct platform_device *pdev)
data->socdata->power_down_mask);
regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
data->socdata->measure_temp_mask);
+ /* After power up, we need a delay before first access can be done. */
+ usleep_range(20, 50);
+
+ /* the core was configured and enabled just before */
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(data->dev);
+
+ ret = pm_runtime_resume_and_get(data->dev);
+ if (ret < 0)
+ goto disable_runtime_pm;
data->irq_enabled = true;
ret = thermal_zone_device_enable(data->tz);
@@ -814,10 +800,15 @@ static int imx_thermal_probe(struct platform_device *pdev)
goto thermal_zone_unregister;
}
+ pm_runtime_put(data->dev);
+
return 0;
thermal_zone_unregister:
thermal_zone_device_unregister(data->tz);
+disable_runtime_pm:
+ pm_runtime_put_noidle(data->dev);
+ pm_runtime_disable(data->dev);
clk_disable:
clk_disable_unprepare(data->thermal_clk);
legacy_cleanup:
@@ -829,13 +820,9 @@ legacy_cleanup:
static int imx_thermal_remove(struct platform_device *pdev)
{
struct imx_thermal_data *data = platform_get_drvdata(pdev);
- struct regmap *map = data->tempmon;
- /* Disable measurements */
- regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
- data->socdata->power_down_mask);
- if (!IS_ERR(data->thermal_clk))
- clk_disable_unprepare(data->thermal_clk);
+ pm_runtime_put_noidle(data->dev);
+ pm_runtime_disable(data->dev);
thermal_zone_device_unregister(data->tz);
imx_thermal_unregister_legacy_cooling(data);
@@ -858,29 +845,79 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
ret = thermal_zone_device_disable(data->tz);
if (ret)
return ret;
+
+ return pm_runtime_force_suspend(data->dev);
+}
+
+static int __maybe_unused imx_thermal_resume(struct device *dev)
+{
+ struct imx_thermal_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_resume(data->dev);
+ if (ret)
+ return ret;
+ /* Enabled thermal sensor after resume */
+ return thermal_zone_device_enable(data->tz);
+}
+
+static int __maybe_unused imx_thermal_runtime_suspend(struct device *dev)
+{
+ struct imx_thermal_data *data = dev_get_drvdata(dev);
+ const struct thermal_soc_data *socdata = data->socdata;
+ struct regmap *map = data->tempmon;
+ int ret;
+
+ ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
+ socdata->measure_temp_mask);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
+ socdata->power_down_mask);
+ if (ret)
+ return ret;
+
clk_disable_unprepare(data->thermal_clk);
return 0;
}
-static int __maybe_unused imx_thermal_resume(struct device *dev)
+static int __maybe_unused imx_thermal_runtime_resume(struct device *dev)
{
struct imx_thermal_data *data = dev_get_drvdata(dev);
+ const struct thermal_soc_data *socdata = data->socdata;
+ struct regmap *map = data->tempmon;
int ret;
ret = clk_prepare_enable(data->thermal_clk);
if (ret)
return ret;
- /* Enabled thermal sensor after resume */
- ret = thermal_zone_device_enable(data->tz);
+
+ ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
+ socdata->power_down_mask);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
+ socdata->measure_temp_mask);
if (ret)
return ret;
+ /*
+ * According to the temp sensor designers, it may require up to ~17us
+ * to complete a measurement.
+ */
+ usleep_range(20, 50);
+
return 0;
}
-static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
- imx_thermal_suspend, imx_thermal_resume);
+static const struct dev_pm_ops imx_thermal_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx_thermal_suspend, imx_thermal_resume)
+ SET_RUNTIME_PM_OPS(imx_thermal_runtime_suspend,
+ imx_thermal_runtime_resume, NULL)
+};
static struct platform_driver imx_thermal = {
.driver = {
--
2.34.1
From: Zack Rusin <[email protected]>
[ Upstream commit c451af78f301ff5156998d571c37cab329c10051 ]
Some of our hosts have a bug where rescaning a pci bus results in stale
fifo memory being mapped on the host. This makes any fifo communication
impossible resulting in various kernel crashes.
Instead of unexpectedly crashing, predictably fail to load the driver
which will preserve the system.
Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Signed-off-by: Zack Rusin <[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_cmd.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_cmd.c b/drivers/gpu/drm/vmwgfx/vmwgfx_cmd.c
index 67db472d3493c..a3bfbb6c3e14a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_cmd.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_cmd.c
@@ -145,6 +145,13 @@ struct vmw_fifo_state *vmw_fifo_create(struct vmw_private *dev_priv)
(unsigned int) max,
(unsigned int) min,
(unsigned int) fifo->capabilities);
+
+ if (unlikely(min >= max)) {
+ drm_warn(&dev_priv->drm,
+ "FIFO memory is not usable. Driver failed to initialize.");
+ return ERR_PTR(-ENXIO);
+ }
+
return fifo;
}
--
2.34.1
From: Marco Chiappero <[email protected]>
[ Upstream commit 6e680f94bc31d0fd0ff01123c964d895ea8040fa ]
The functions adf_iov_putmsg() and __adf_iov_putmsg() are shared by both
PF and VF. Any logging or documentation should not refer to any specific
direction.
Make comments and log messages direction agnostic by replacing PF2VF
with PFVF. Also fix the wording for some related comments.
Signed-off-by: Marco Chiappero <[email protected]>
Co-developed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index d3f6ff68d45d9..d5a7261ddd928 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -117,11 +117,11 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
mutex_lock(lock);
- /* Check if PF2VF CSR is in use by remote function */
+ /* Check if the PFVF CSR is in use by remote function */
val = ADF_CSR_RD(pmisc_bar_addr, pf2vf_offset);
if ((val & remote_in_use_mask) == remote_in_use_pattern) {
dev_dbg(&GET_DEV(accel_dev),
- "PF2VF CSR in use by remote function\n");
+ "PFVF CSR in use by remote function\n");
ret = -EBUSY;
goto out;
}
@@ -129,7 +129,7 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
msg &= ~local_in_use_mask;
msg |= local_in_use_pattern;
- /* Attempt to get ownership of the PF2VF CSR */
+ /* Attempt to get ownership of the PFVF CSR */
ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, msg | int_bit);
/* Wait for confirmation from remote func it received the message */
@@ -151,7 +151,7 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
ret = -EIO;
}
- /* Finished with PF2VF CSR; relinquish it and leave msg in CSR */
+ /* Finished with the PFVF CSR; relinquish it and leave msg in CSR */
ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, val & ~local_in_use_mask);
out:
mutex_unlock(lock);
@@ -159,12 +159,13 @@ out:
}
/**
- * adf_iov_putmsg() - send PF2VF message
+ * adf_iov_putmsg() - send PFVF message
* @accel_dev: Pointer to acceleration device.
* @msg: Message to send
- * @vf_nr: VF number to which the message will be sent
+ * @vf_nr: VF number to which the message will be sent if on PF, ignored
+ * otherwise
*
- * Function sends a message from the PF to a VF
+ * Function sends a message through the PFVF channel
*
* Return: 0 on success, error code otherwise.
*/
--
2.34.1
From: William Kucharski <[email protected]>
[ Upstream commit e14da77113bb890d7bf9e5d17031bdd476a7ce5e ]
Various trace event fields that store cgroup IDs were declared as
ints, but cgroup_id(() returns a u64 and the structures and associated
TP_printk() calls were not updated to reflect this.
Fixes: 743210386c03 ("cgroup: use cgrp->kn->id as the cgroup ID")
Signed-off-by: William Kucharski <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/trace/events/cgroup.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/trace/events/cgroup.h b/include/trace/events/cgroup.h
index 7f42a3de59e6b..dd7d7c9efecdf 100644
--- a/include/trace/events/cgroup.h
+++ b/include/trace/events/cgroup.h
@@ -59,8 +59,8 @@ DECLARE_EVENT_CLASS(cgroup,
TP_STRUCT__entry(
__field( int, root )
- __field( int, id )
__field( int, level )
+ __field( u64, id )
__string( path, path )
),
@@ -71,7 +71,7 @@ DECLARE_EVENT_CLASS(cgroup,
__assign_str(path, path);
),
- TP_printk("root=%d id=%d level=%d path=%s",
+ TP_printk("root=%d id=%llu level=%d path=%s",
__entry->root, __entry->id, __entry->level, __get_str(path))
);
@@ -126,8 +126,8 @@ DECLARE_EVENT_CLASS(cgroup_migrate,
TP_STRUCT__entry(
__field( int, dst_root )
- __field( int, dst_id )
__field( int, dst_level )
+ __field( u64, dst_id )
__field( int, pid )
__string( dst_path, path )
__string( comm, task->comm )
@@ -142,7 +142,7 @@ DECLARE_EVENT_CLASS(cgroup_migrate,
__assign_str(comm, task->comm);
),
- TP_printk("dst_root=%d dst_id=%d dst_level=%d dst_path=%s pid=%d comm=%s",
+ TP_printk("dst_root=%d dst_id=%llu dst_level=%d dst_path=%s pid=%d comm=%s",
__entry->dst_root, __entry->dst_id, __entry->dst_level,
__get_str(dst_path), __entry->pid, __get_str(comm))
);
@@ -171,8 +171,8 @@ DECLARE_EVENT_CLASS(cgroup_event,
TP_STRUCT__entry(
__field( int, root )
- __field( int, id )
__field( int, level )
+ __field( u64, id )
__string( path, path )
__field( int, val )
),
@@ -185,7 +185,7 @@ DECLARE_EVENT_CLASS(cgroup_event,
__entry->val = val;
),
- TP_printk("root=%d id=%d level=%d path=%s val=%d",
+ TP_printk("root=%d id=%llu level=%d path=%s val=%d",
__entry->root, __entry->id, __entry->level, __get_str(path),
__entry->val)
);
--
2.34.1
From: Zack Rusin <[email protected]>
[ Upstream commit 826c387d015247df396a91eadbaca94f0394853c ]
TTM during the transition to the new page allocator lost the ability
to constrain the allocations via the lower_mem_limit. The code has
been unused since the change:
256dd44bd897 ("drm/ttm: nuke old page allocator")
and there's no reason to keep it.
Fixes: 256dd44bd897 ("drm/ttm: nuke old page allocator")
Signed-off-by: Zack Rusin <[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vmwgfx/ttm_memory.c | 99 +----------------------------
drivers/gpu/drm/vmwgfx/ttm_memory.h | 6 +-
2 files changed, 2 insertions(+), 103 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/ttm_memory.c b/drivers/gpu/drm/vmwgfx/ttm_memory.c
index edd17c30d5a51..2ced4c06ca451 100644
--- a/drivers/gpu/drm/vmwgfx/ttm_memory.c
+++ b/drivers/gpu/drm/vmwgfx/ttm_memory.c
@@ -34,7 +34,6 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/swap.h>
#include <drm/drm_device.h>
#include <drm/drm_file.h>
@@ -173,69 +172,7 @@ static struct kobj_type ttm_mem_zone_kobj_type = {
.sysfs_ops = &ttm_mem_zone_ops,
.default_attrs = ttm_mem_zone_attrs,
};
-
-static struct attribute ttm_mem_global_lower_mem_limit = {
- .name = "lower_mem_limit",
- .mode = S_IRUGO | S_IWUSR
-};
-
-static ssize_t ttm_mem_global_show(struct kobject *kobj,
- struct attribute *attr,
- char *buffer)
-{
- struct ttm_mem_global *glob =
- container_of(kobj, struct ttm_mem_global, kobj);
- uint64_t val = 0;
-
- spin_lock(&glob->lock);
- val = glob->lower_mem_limit;
- spin_unlock(&glob->lock);
- /* convert from number of pages to KB */
- val <<= (PAGE_SHIFT - 10);
- return snprintf(buffer, PAGE_SIZE, "%llu\n",
- (unsigned long long) val);
-}
-
-static ssize_t ttm_mem_global_store(struct kobject *kobj,
- struct attribute *attr,
- const char *buffer,
- size_t size)
-{
- int chars;
- uint64_t val64;
- unsigned long val;
- struct ttm_mem_global *glob =
- container_of(kobj, struct ttm_mem_global, kobj);
-
- chars = sscanf(buffer, "%lu", &val);
- if (chars == 0)
- return size;
-
- val64 = val;
- /* convert from KB to number of pages */
- val64 >>= (PAGE_SHIFT - 10);
-
- spin_lock(&glob->lock);
- glob->lower_mem_limit = val64;
- spin_unlock(&glob->lock);
-
- return size;
-}
-
-static struct attribute *ttm_mem_global_attrs[] = {
- &ttm_mem_global_lower_mem_limit,
- NULL
-};
-
-static const struct sysfs_ops ttm_mem_global_ops = {
- .show = &ttm_mem_global_show,
- .store = &ttm_mem_global_store,
-};
-
-static struct kobj_type ttm_mem_glob_kobj_type = {
- .sysfs_ops = &ttm_mem_global_ops,
- .default_attrs = ttm_mem_global_attrs,
-};
+static struct kobj_type ttm_mem_glob_kobj_type = {0};
static bool ttm_zones_above_swap_target(struct ttm_mem_global *glob,
bool from_wq, uint64_t extra)
@@ -435,11 +372,6 @@ int ttm_mem_global_init(struct ttm_mem_global *glob, struct device *dev)
si_meminfo(&si);
- spin_lock(&glob->lock);
- /* set it as 0 by default to keep original behavior of OOM */
- glob->lower_mem_limit = 0;
- spin_unlock(&glob->lock);
-
ret = ttm_mem_init_kernel_zone(glob, &si);
if (unlikely(ret != 0))
goto out_no_zone;
@@ -527,35 +459,6 @@ void ttm_mem_global_free(struct ttm_mem_global *glob,
}
EXPORT_SYMBOL(ttm_mem_global_free);
-/*
- * check if the available mem is under lower memory limit
- *
- * a. if no swap disk at all or free swap space is under swap_mem_limit
- * but available system mem is bigger than sys_mem_limit, allow TTM
- * allocation;
- *
- * b. if the available system mem is less than sys_mem_limit but free
- * swap disk is bigger than swap_mem_limit, allow TTM allocation.
- */
-bool
-ttm_check_under_lowerlimit(struct ttm_mem_global *glob,
- uint64_t num_pages,
- struct ttm_operation_ctx *ctx)
-{
- int64_t available;
-
- /* We allow over commit during suspend */
- if (ctx->force_alloc)
- return false;
-
- available = get_nr_swap_pages() + si_mem_available();
- available -= num_pages;
- if (available < glob->lower_mem_limit)
- return true;
-
- return false;
-}
-
static int ttm_mem_global_reserve(struct ttm_mem_global *glob,
struct ttm_mem_zone *single_zone,
uint64_t amount, bool reserve)
diff --git a/drivers/gpu/drm/vmwgfx/ttm_memory.h b/drivers/gpu/drm/vmwgfx/ttm_memory.h
index c50dba7744854..7b0d617ebcb1e 100644
--- a/drivers/gpu/drm/vmwgfx/ttm_memory.h
+++ b/drivers/gpu/drm/vmwgfx/ttm_memory.h
@@ -50,8 +50,6 @@
* @work: The workqueue callback for the shrink queue.
* @lock: Lock to protect the @shrink - and the memory accounting members,
* that is, essentially the whole structure with some exceptions.
- * @lower_mem_limit: include lower limit of swap space and lower limit of
- * system memory.
* @zones: Array of pointers to accounting zones.
* @num_zones: Number of populated entries in the @zones array.
* @zone_kernel: Pointer to the kernel zone.
@@ -69,7 +67,6 @@ extern struct ttm_mem_global {
struct workqueue_struct *swap_queue;
struct work_struct work;
spinlock_t lock;
- uint64_t lower_mem_limit;
struct ttm_mem_zone *zones[TTM_MEM_MAX_ZONES];
unsigned int num_zones;
struct ttm_mem_zone *zone_kernel;
@@ -91,6 +88,5 @@ int ttm_mem_global_alloc_page(struct ttm_mem_global *glob,
void ttm_mem_global_free_page(struct ttm_mem_global *glob,
struct page *page, uint64_t size);
size_t ttm_round_pot(size_t size);
-bool ttm_check_under_lowerlimit(struct ttm_mem_global *glob, uint64_t num_pages,
- struct ttm_operation_ctx *ctx);
+
#endif
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit b0293c19d42f6d6951c2fab9a47fed50baf2c14d ]
Change sdhcN aliases to mmcN to make them actually work. Currently the
board uses non-standard aliases sdhcN, which do not work, resulting in
mmc0 and mmc1 hosts randomly changing indices between boots.
Fixes: c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 427bb20626549..8b27242724641 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -19,8 +19,8 @@
#size-cells = <2>;
aliases {
- sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
- sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
};
chosen { };
--
2.34.1
From: Alexei Starovoitov <[email protected]>
[ Upstream commit c5a2d43e998a821701029f23e25b62f9188e93ff ]
Make BTF log size limit to be the same as the verifier log size limit.
Otherwise tools that progressively increase log size and use the same log
for BTF loading and program loading will be hitting hard to debug EINVAL.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/btf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index dfe61df4f974d..79c0bcdcab842 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -4332,7 +4332,7 @@ static struct btf *btf_parse(bpfptr_t btf_data, u32 btf_data_size,
log->len_total = log_size;
/* log attributes have to be sane */
- if (log->len_total < 128 || log->len_total > UINT_MAX >> 8 ||
+ if (log->len_total < 128 || log->len_total > UINT_MAX >> 2 ||
!log->level || !log->ubuf) {
err = -EINVAL;
goto errout;
--
2.34.1
From: Nishanth Menon <[email protected]>
[ Upstream commit e9ba3a5bc6fdc2c796c69fdaf5ed6c9957cf9f9d ]
A72's L2 cache[1] on J721e[2] is 1MB. A72's L2 is fixed line length of
64 bytes and 16-way set-associative cache structure.
1MB of L2 / 64 (line length) = 16384 ways
16384 ways / 16 = 1024 sets
Fix the l2 cache-sets.
[1] https://developer.arm.com/documentation/100095/0003/Level-2-Memory-System/About-the-L2-memory-system
[2] http://www.ti.com/lit/pdf/spruil1
Fixes: 2d87061e70de ("arm64: dts: ti: Add Support for J721E SoC")
Reported-by: Peng Fan <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 9f1d25d57a693..69ce048a2136e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -85,7 +85,7 @@
cache-level = <2>;
cache-size = <0x100000>;
cache-line-size = <64>;
- cache-sets = <2048>;
+ cache-sets = <1024>;
next-level-cache = <&msmc_l3>;
};
--
2.34.1
From: Fabio Estevam <[email protected]>
[ Upstream commit 09b8cd69edcf2be04a781e1781e98e52a775c9ad ]
On an imx6dl-pico-pi board with a QCA9377 SDIO chip, simply trying to
connect via ssh to another machine causes:
[ 55.824159] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12
[ 55.832169] ath10k_sdio mmc1:0001:1: failed to submit frame: -12
[ 55.838529] ath10k_sdio mmc1:0001:1: failed to push frame: -12
[ 55.905863] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12
[ 55.913650] ath10k_sdio mmc1:0001:1: failed to submit frame: -12
[ 55.919887] ath10k_sdio mmc1:0001:1: failed to push frame: -12
, leading to an ssh connection failure.
One user inspected the size of frames on Wireshark and reported
the followig:
"I was able to narrow the issue down to the mtu. If I set the mtu for
the wlan0 device to 1486 instead of 1500, the issue does not happen.
The size of frames that I see on Wireshark is exactly 1500 after
setting it to 1486."
Clearing the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE avoids the problem and
the ssh command works successfully after that.
Introduce a 'credit_size_workaround' field to ath10k_hw_params for
the QCA9377 SDIO, so that the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE
is not set in this case.
Tested with QCA9377 SDIO with firmware WLAN.TF.1.1.1-00061-QCATFSWPZ-1.
Fixes: 2f918ea98606 ("ath10k: enable alt data of TX path for sdio")
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 19 ++++++++++++++++++-
drivers/net/wireless/ath/ath10k/hw.h | 3 +++
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 64c7145b51a2e..58e86e662ab83 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -89,6 +89,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = true,
.dynamic_sar_support = false,
},
@@ -124,6 +125,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = true,
.dynamic_sar_support = false,
},
@@ -160,6 +162,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -190,6 +193,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.num_wds_entries = 0x20,
.uart_pin_workaround = true,
.tx_stats_over_pktlog = false,
+ .credit_size_workaround = false,
.bmi_large_size_download = true,
.supports_peer_stats_info = true,
.dynamic_sar_support = true,
@@ -226,6 +230,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -261,6 +266,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -296,6 +302,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -334,6 +341,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.supports_peer_stats_info = true,
.dynamic_sar_support = true,
@@ -376,6 +384,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -424,6 +433,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -469,6 +479,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -504,6 +515,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -541,6 +553,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -570,6 +583,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.uart_pin_workaround = true,
+ .credit_size_workaround = true,
.dynamic_sar_support = false,
},
{
@@ -611,6 +625,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = false,
},
@@ -639,6 +654,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = true,
.hw_filter_reset_required = false,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.dynamic_sar_support = true,
},
@@ -714,6 +730,7 @@ static void ath10k_send_suspend_complete(struct ath10k *ar)
static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
{
+ bool mtu_workaround = ar->hw_params.credit_size_workaround;
int ret;
u32 param = 0;
@@ -731,7 +748,7 @@ static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
- if (mode == ATH10K_FIRMWARE_MODE_NORMAL)
+ if (mode == ATH10K_FIRMWARE_MODE_NORMAL && !mtu_workaround)
param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
else
param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 6b03c7787e36a..591ef7416b613 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -618,6 +618,9 @@ struct ath10k_hw_params {
*/
bool uart_pin_workaround;
+ /* Workaround for the credit size calculation */
+ bool credit_size_workaround;
+
/* tx stats support over pktlog */
bool tx_stats_over_pktlog;
--
2.34.1
From: Kees Cook <[email protected]>
[ Upstream commit 61646ca83d3889696f2772edaff122dd96a2935e ]
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
./arch/x86/include/asm/uaccess.h:317:23: warning: statement will never be executed [-Wswitch-unreachable]
317 | unsigned char x_u8__; \
| ^~~~~~
Fixes: 865c50e1d279 ("x86/uaccess: utilize CONFIG_CC_HAS_ASM_GOTO_OUTPUT")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/uaccess.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 5c95d242f38d7..bb1430283c726 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -314,11 +314,12 @@ do { \
do { \
__chk_user_ptr(ptr); \
switch (size) { \
- unsigned char x_u8__; \
- case 1: \
+ case 1: { \
+ unsigned char x_u8__; \
__get_user_asm(x_u8__, ptr, "b", "=q", label); \
(x) = x_u8__; \
break; \
+ } \
case 2: \
__get_user_asm(x, ptr, "w", "=r", label); \
break; \
--
2.34.1
From: Philipp Zabel <[email protected]>
[ Upstream commit 1a59cd88f55068710f6549bee548846661673780 ]
Stop the CODA960 JPEG encoder from overflowing capture buffers.
The bitstream buffer overflow interrupt doesn't seem to be connected,
so this has to be handled via timeout instead.
Reported-by: Martin Weber <[email protected]>
Fixes: 96f6f62c4656 ("media: coda: jpeg: add CODA960 JPEG encoder support")
Tested-by: Martin Weber <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/coda/coda-common.c | 8 +++++---
drivers/media/platform/coda/coda-jpeg.c | 21 ++++++++++++++++++++-
2 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index 0e312b0842d7f..9a2640a9c75c6 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -1537,11 +1537,13 @@ static void coda_pic_run_work(struct work_struct *work)
if (!wait_for_completion_timeout(&ctx->completion,
msecs_to_jiffies(1000))) {
- dev_err(dev->dev, "CODA PIC_RUN timeout\n");
+ if (ctx->use_bit) {
+ dev_err(dev->dev, "CODA PIC_RUN timeout\n");
- ctx->hold = true;
+ ctx->hold = true;
- coda_hw_reset(ctx);
+ coda_hw_reset(ctx);
+ }
if (ctx->ops->run_timeout)
ctx->ops->run_timeout(ctx);
diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c
index b11cfbe166dd3..a72f4655e5ad5 100644
--- a/drivers/media/platform/coda/coda-jpeg.c
+++ b/drivers/media/platform/coda/coda-jpeg.c
@@ -1127,7 +1127,8 @@ static int coda9_jpeg_prepare_encode(struct coda_ctx *ctx)
coda_write(dev, 0, CODA9_REG_JPEG_GBU_BT_PTR);
coda_write(dev, 0, CODA9_REG_JPEG_GBU_WD_PTR);
coda_write(dev, 0, CODA9_REG_JPEG_GBU_BBSR);
- coda_write(dev, 0, CODA9_REG_JPEG_BBC_STRM_CTRL);
+ coda_write(dev, BIT(31) | ((end_addr - start_addr - header_len) / 256),
+ CODA9_REG_JPEG_BBC_STRM_CTRL);
coda_write(dev, 0, CODA9_REG_JPEG_GBU_CTRL);
coda_write(dev, 0, CODA9_REG_JPEG_GBU_FF_RPTR);
coda_write(dev, 127, CODA9_REG_JPEG_GBU_BBER);
@@ -1257,6 +1258,23 @@ static void coda9_jpeg_finish_encode(struct coda_ctx *ctx)
coda_hw_reset(ctx);
}
+static void coda9_jpeg_encode_timeout(struct coda_ctx *ctx)
+{
+ struct coda_dev *dev = ctx->dev;
+ u32 end_addr, wr_ptr;
+
+ /* Handle missing BBC overflow interrupt via timeout */
+ end_addr = coda_read(dev, CODA9_REG_JPEG_BBC_END_ADDR);
+ wr_ptr = coda_read(dev, CODA9_REG_JPEG_BBC_WR_PTR);
+ if (wr_ptr >= end_addr - 256) {
+ v4l2_err(&dev->v4l2_dev, "JPEG too large for capture buffer\n");
+ coda9_jpeg_finish_encode(ctx);
+ return;
+ }
+
+ coda_hw_reset(ctx);
+}
+
static void coda9_jpeg_release(struct coda_ctx *ctx)
{
int i;
@@ -1276,6 +1294,7 @@ const struct coda_context_ops coda9_jpeg_encode_ops = {
.start_streaming = coda9_jpeg_start_encoding,
.prepare_run = coda9_jpeg_prepare_encode,
.finish_run = coda9_jpeg_finish_encode,
+ .run_timeout = coda9_jpeg_encode_timeout,
.release = coda9_jpeg_release,
};
--
2.34.1
From: Rob Clark <[email protected]>
[ Upstream commit ca3ffcbeb0c866d9b0cb38eaa2bd4416597b5966 ]
Elsewhere we treat zero as "no fence" and __msm_gem_submit_destroy()
skips removal from fence_idr. We could alternately change this to use
negative values for "no fence" but I think it is more clear to not allow
zero as a valid fence_id.
Signed-off-by: Rob Clark <[email protected]>
Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_gem_submit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c
index d9aef97eb93ad..7fb7ff043bcd7 100644
--- a/drivers/gpu/drm/msm/msm_gem_submit.c
+++ b/drivers/gpu/drm/msm/msm_gem_submit.c
@@ -887,7 +887,7 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data,
* to the underlying fence.
*/
submit->fence_id = idr_alloc_cyclic(&queue->fence_idr,
- submit->user_fence, 0, INT_MAX, GFP_KERNEL);
+ submit->user_fence, 1, INT_MAX, GFP_KERNEL);
if (submit->fence_id < 0) {
ret = submit->fence_id = 0;
submit->fence_id = 0;
--
2.34.1
From: Nishanth Menon <[email protected]>
[ Upstream commit d0c826106f3fc11ff97285102b576b65576654ae ]
A72's L2 cache[1] on J7200[2] is 1MB. A72's L2 is fixed line length of
64 bytes and 16-way set-associative cache structure.
1MB of L2 / 64 (line length) = 16384 ways
16384 ways / 16 = 1024 sets
Fix the l2 cache-sets.
[1] https://developer.arm.com/documentation/100095/0003/Level-2-Memory-System/About-the-L2-memory-system
[2] https://www.ti.com/lit/pdf/spruiu1
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index b7005b8031495..df86c36c21134 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -84,7 +84,7 @@
cache-level = <2>;
cache-size = <0x100000>;
cache-line-size = <64>;
- cache-sets = <2048>;
+ cache-sets = <1024>;
next-level-cache = <&msmc_l3>;
};
--
2.34.1
From: Jakub Kicinski <[email protected]>
[ Upstream commit 3abedf4646fdc0036fcb8ebbc3b600667167fafe ]
Test can fail either immediately when ASSERT() failed or at the
end if one or more EXPECT() was not met. The exact return code
is decided based on the number of successful ASSERT()s.
If test has no ASSERT()s, however, the return code will be 0,
as if the test did not fail. Start counting ASSERT()s from 1.
Fixes: 369130b63178 ("selftests: Enhance kselftest_harness.h to print which assert failed")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kselftest_harness.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index ae0f0f33b2a6e..79a182cfa43ad 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -969,7 +969,7 @@ void __run_test(struct __fixture_metadata *f,
t->passed = 1;
t->skip = 0;
t->trigger = 0;
- t->step = 0;
+ t->step = 1;
t->no_print = 0;
memset(t->results->reason, 0, sizeof(t->results->reason));
--
2.34.1
From: Jackie Liu <[email protected]>
[ Upstream commit 53d22794711ad630f40d59dd726bd260d77d585f ]
Let's select RATIONAL with dp driver. avoid like:
[...]
x86_64-linux-gnu-ld: drivers/gpu/drm/msm/dp/dp_catalog.o: in function `dp_catalog_ctrl_config_msa':
dp_catalog.c:(.text+0x57e): undefined reference to `rational_best_approximation'
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Reported-by: kernelbot <[email protected]>
Signed-off-by: Jackie Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 3ddf739a6f9b8..c49b239231190 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -63,6 +63,7 @@ config DRM_MSM_HDMI_HDCP
config DRM_MSM_DP
bool "Enable DisplayPort support in MSM DRM driver"
depends on DRM_MSM
+ select RATIONAL
default y
help
Compile in support for DP driver in MSM DRM driver. DP external
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit 6f670d06e47c774bc065aaa84a527a4838f34bd8 ]
Clang doesn't have 'stringop-truncation' group like GCC does, and
complains about it when building samples which use xdp_sample_user
infra:
samples/bpf/xdp_sample_user.h:48:32: warning: unknown warning group '-Wstringop-truncation', ignored [-Wunknown-warning-option]
#pragma GCC diagnostic ignored "-Wstringop-truncation"
^
[ repeat ]
Those are harmless, but avoidable when guarding it with ifdef.
I could guard push/pop as well, but this would require one more
ifdef cruft around a single line which I don't think is reasonable.
Fixes: 156f886cf697 ("samples: bpf: Add basic infrastructure for XDP samples")
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/xdp_sample_user.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/samples/bpf/xdp_sample_user.h b/samples/bpf/xdp_sample_user.h
index d97465ff8c62c..5f44b877ecf5f 100644
--- a/samples/bpf/xdp_sample_user.h
+++ b/samples/bpf/xdp_sample_user.h
@@ -45,7 +45,9 @@ const char *get_driver_name(int ifindex);
int get_mac_addr(int ifindex, void *mac_addr);
#pragma GCC diagnostic push
+#ifndef __clang__
#pragma GCC diagnostic ignored "-Wstringop-truncation"
+#endif
__attribute__((unused))
static inline char *safe_strncpy(char *dst, const char *src, size_t size)
{
--
2.34.1
From: Moshe Shemesh <[email protected]>
[ Upstream commit 8e715cd613a1e872b9d918e912d90b399785761a ]
Avoid a race where command work handler may fail to allocate command
entry index, by holding the command semaphore down till command entry
index is being freed.
Fixes: 410bd754cd73 ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index bea35530c2d0b..a0704be46e507 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -147,8 +147,12 @@ static void cmd_ent_put(struct mlx5_cmd_work_ent *ent)
if (!refcount_dec_and_test(&ent->refcnt))
return;
- if (ent->idx >= 0)
- cmd_free_index(ent->cmd, ent->idx);
+ if (ent->idx >= 0) {
+ struct mlx5_cmd *cmd = ent->cmd;
+
+ cmd_free_index(cmd, ent->idx);
+ up(ent->page_queue ? &cmd->pages_sem : &cmd->sem);
+ }
cmd_free_ent(ent);
}
@@ -1594,8 +1598,6 @@ static void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool force
vector = vec & 0xffffffff;
for (i = 0; i < (1 << cmd->log_sz); i++) {
if (test_bit(i, &vector)) {
- struct semaphore *sem;
-
ent = cmd->ent_arr[i];
/* if we already completed the command, ignore it */
@@ -1618,10 +1620,6 @@ static void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool force
dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR)
cmd_ent_put(ent);
- if (ent->page_queue)
- sem = &cmd->pages_sem;
- else
- sem = &cmd->sem;
ent->ts2 = ktime_get_ns();
memcpy(ent->out->first.data, ent->lay->out, sizeof(ent->lay->out));
dump_command(dev, ent, 0);
@@ -1675,7 +1673,6 @@ static void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool force
*/
complete(&ent->done);
}
- up(sem);
}
}
}
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 06764dc931848c3a9bc01a63bbf76a605408bb54 ]
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 9058cbe1eed2 ("ALSA: jack: implement kctl creating for jack devices")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/jack.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/core/jack.c b/sound/core/jack.c
index 537df1e98f8ac..d1e3055f2b6a5 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -62,10 +62,13 @@ static int snd_jack_dev_free(struct snd_device *device)
struct snd_card *card = device->card;
struct snd_jack_kctl *jack_kctl, *tmp_jack_kctl;
+ down_write(&card->controls_rwsem);
list_for_each_entry_safe(jack_kctl, tmp_jack_kctl, &jack->kctl_list, list) {
list_del_init(&jack_kctl->list);
snd_ctl_remove(card, jack_kctl->kctl);
}
+ up_write(&card->controls_rwsem);
+
if (jack->private_free)
jack->private_free(jack);
--
2.34.1
From: Zizhuang Deng <[email protected]>
[ Upstream commit dd827abe296fe4249b2f8c9b95f72f814ea8348c ]
Add the return value check of kcalloc() to avoid potential
NULL ptr dereference.
Fixes: a8ea8bdd9df9 ("lib/mpi: Extend the MPI library")
Signed-off-by: Zizhuang Deng <[email protected]>
Reviewed-by: Tianjia Zhang <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/mpi/mpi-mod.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/lib/mpi/mpi-mod.c b/lib/mpi/mpi-mod.c
index 47bc59edd4ff9..54fcc01564d9d 100644
--- a/lib/mpi/mpi-mod.c
+++ b/lib/mpi/mpi-mod.c
@@ -40,6 +40,8 @@ mpi_barrett_t mpi_barrett_init(MPI m, int copy)
mpi_normalize(m);
ctx = kcalloc(1, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return NULL;
if (copy) {
ctx->m = mpi_copy(m);
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 5471e9762e1af4b7df057a96bfd46cc250979b88 ]
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: a8ff48cb7083 ("ALSA: pcm: Free chmap at PCM free callback, too")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/pcm.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 6fd3677685d70..ba4a987ed1c62 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -810,7 +810,11 @@ EXPORT_SYMBOL(snd_pcm_new_internal);
static void free_chmap(struct snd_pcm_str *pstr)
{
if (pstr->chmap_kctl) {
- snd_ctl_remove(pstr->pcm->card, pstr->chmap_kctl);
+ struct snd_card *card = pstr->pcm->card;
+
+ down_write(&card->controls_rwsem);
+ snd_ctl_remove(card, pstr->chmap_kctl);
+ up_write(&card->controls_rwsem);
pstr->chmap_kctl = NULL;
}
}
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit 49f893253ab43566e34332a969324531fea463f6 ]
Commit f37fe2f9987b ("ASoC: uniphier: add support for UniPhier AIO common
driver") adds configs SND_SOC_UNIPHIER_{LD11,PXS2}, which select the
non-existing config SND_SOC_UNIPHIER_AIO_DMA.
Hence, ./scripts/checkkconfigsymbols.py warns:
SND_SOC_UNIPHIER_AIO_DMA
Referencing files: sound/soc/uniphier/Kconfig
Probably, there is actually no further config intended to be selected
here. So, just drop selecting the non-existing config.
Fixes: f37fe2f9987b ("ASoC: uniphier: add support for UniPhier AIO common driver")
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/uniphier/Kconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/sound/soc/uniphier/Kconfig b/sound/soc/uniphier/Kconfig
index aa3592ee1358b..ddfa6424c656b 100644
--- a/sound/soc/uniphier/Kconfig
+++ b/sound/soc/uniphier/Kconfig
@@ -23,7 +23,6 @@ config SND_SOC_UNIPHIER_LD11
tristate "UniPhier LD11/LD20 Device Driver"
depends on SND_SOC_UNIPHIER
select SND_SOC_UNIPHIER_AIO
- select SND_SOC_UNIPHIER_AIO_DMA
help
This adds ASoC driver for Socionext UniPhier LD11/LD20
input and output that can be used with other codecs.
@@ -34,7 +33,6 @@ config SND_SOC_UNIPHIER_PXS2
tristate "UniPhier PXs2 Device Driver"
depends on SND_SOC_UNIPHIER
select SND_SOC_UNIPHIER_AIO
- select SND_SOC_UNIPHIER_AIO_DMA
help
This adds ASoC driver for Socionext UniPhier PXs2
input and output that can be used with other codecs.
--
2.34.1
From: Alexei Starovoitov <[email protected]>
[ Upstream commit 19250f5fc0c283892a61f3abf9d65e6325f63897 ]
The gen_loader has to clear attach_kind otherwise the programs
without attach_btf_id will fail load if they follow programs
with attach_btf_id.
Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/gen_loader.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/lib/bpf/gen_loader.c b/tools/lib/bpf/gen_loader.c
index 8df718a6b142d..33c19590ee434 100644
--- a/tools/lib/bpf/gen_loader.c
+++ b/tools/lib/bpf/gen_loader.c
@@ -663,9 +663,11 @@ void bpf_gen__prog_load(struct bpf_gen *gen,
debug_ret(gen, "prog_load %s insn_cnt %d", attr.prog_name, attr.insn_cnt);
/* successful or not, close btf module FDs used in extern ksyms and attach_btf_obj_fd */
cleanup_relos(gen, insns);
- if (gen->attach_kind)
+ if (gen->attach_kind) {
emit_sys_close_blob(gen,
attr_field(prog_load_attr, attach_btf_obj_fd));
+ gen->attach_kind = 0;
+ }
emit_check_err(gen);
/* remember prog_fd in the stack, if successful */
emit(gen, BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_7,
--
2.34.1
From: Nishanth Menon <[email protected]>
[ Upstream commit a172c86931709d6663318609d71a811333bdf4b0 ]
A72 Cluster (chapter 1.3.1 [1]) has 48KB Icache, 32KB Dcache and 1MB L2 Cache
- ICache is 3-way set-associative
- Dcache is 2-way set-associative
- Line size are 64bytes
32KB (Dcache)/64 (fixed line length of 64 bytes) = 512 ways
512 ways / 2 (Dcache is 2-way per set) = 256 sets.
So, correct the d-cache-sets info.
[1] https://www.ti.com/lit/pdf/spruiu1
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Reviewed-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index df86c36c21134..7586b5aea446f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -60,7 +60,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
@@ -74,7 +74,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
};
--
2.34.1
From: Dillon Min <[email protected]>
[ Upstream commit 6fc058a72f3b7b07fc4de6d66ad1f68951b00f6e ]
stm32's clk driver register two ltdc gate clk to clk core by
clk_hw_register_gate() and clk_hw_register_composite()
first: 'stm32f429_gates[]', clk name is 'ltdc', which no user to use.
second: 'stm32f429_aux_clk[]', clk name is 'lcd-tft', used by ltdc driver
both of them point to the same offset of stm32's RCC register. after
kernel enter console, clk core turn off ltdc's clk as 'stm32f429_gates[]'
is no one to use. but, actually 'stm32f429_aux_clk[]' is in use.
stm32f469/746/769 have the same issue, fix it.
Fixes: daf2d117cbca ("clk: stm32f4: Add lcd-tft clock")
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Link: https://lore.kernel.org/lkml/CAPTRvHkf0cK_4ZidM17rPo99gWDmxgqFt4CDUjqFFwkOeQeFDg@mail.gmail.com/
Signed-off-by: Dillon Min <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
Acked-by: Gabriel Fernandez <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-stm32f4.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index af46176ad0539..473dfe632cc57 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -129,7 +129,6 @@ static const struct stm32f4_gate_data stm32f429_gates[] __initconst = {
{ STM32F4_RCC_APB2ENR, 20, "spi5", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" },
- { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" },
};
static const struct stm32f4_gate_data stm32f469_gates[] __initconst = {
@@ -211,7 +210,6 @@ static const struct stm32f4_gate_data stm32f469_gates[] __initconst = {
{ STM32F4_RCC_APB2ENR, 20, "spi5", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" },
- { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" },
};
static const struct stm32f4_gate_data stm32f746_gates[] __initconst = {
@@ -286,7 +284,6 @@ static const struct stm32f4_gate_data stm32f746_gates[] __initconst = {
{ STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 23, "sai2", "apb2_div" },
- { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" },
};
static const struct stm32f4_gate_data stm32f769_gates[] __initconst = {
@@ -364,7 +361,6 @@ static const struct stm32f4_gate_data stm32f769_gates[] __initconst = {
{ STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 23, "sai2", "apb2_div" },
- { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 30, "mdio", "apb2_div" },
};
--
2.34.1
From: Maxim Levitsky <[email protected]>
[ Upstream commit 4691f79d62a637958f7b5f55c232a65399500b7a ]
This is more logically correct and will also allow us to
to use mask/unmask logic to restore INTX setttings after
the resume from s3/s4.
Fixes: 66929812955bb ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/init.c | 65 ++++++++++++++++++++--------------------
1 file changed, 33 insertions(+), 32 deletions(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index c1d4e66d2747b..a826de8c99c45 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -2012,48 +2012,18 @@ union intcapxt {
};
} __attribute__ ((packed));
-/*
- * There isn't really any need to mask/unmask at the irqchip level because
- * the 64-bit INTCAPXT registers can be updated atomically without tearing
- * when the affinity is being updated.
- */
-static void intcapxt_unmask_irq(struct irq_data *data)
-{
-}
-
-static void intcapxt_mask_irq(struct irq_data *data)
-{
-}
static struct irq_chip intcapxt_controller;
static int intcapxt_irqdomain_activate(struct irq_domain *domain,
struct irq_data *irqd, bool reserve)
{
- struct amd_iommu *iommu = irqd->chip_data;
- struct irq_cfg *cfg = irqd_cfg(irqd);
- union intcapxt xt;
-
- xt.capxt = 0ULL;
- xt.dest_mode_logical = apic->dest_mode_logical;
- xt.vector = cfg->vector;
- xt.destid_0_23 = cfg->dest_apicid & GENMASK(23, 0);
- xt.destid_24_31 = cfg->dest_apicid >> 24;
-
- /**
- * Current IOMMU implemtation uses the same IRQ for all
- * 3 IOMMU interrupts.
- */
- writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_EVT_OFFSET);
- writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_PPR_OFFSET);
- writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_GALOG_OFFSET);
return 0;
}
static void intcapxt_irqdomain_deactivate(struct irq_domain *domain,
struct irq_data *irqd)
{
- intcapxt_mask_irq(irqd);
}
@@ -2087,6 +2057,38 @@ static void intcapxt_irqdomain_free(struct irq_domain *domain, unsigned int virq
irq_domain_free_irqs_top(domain, virq, nr_irqs);
}
+
+static void intcapxt_unmask_irq(struct irq_data *irqd)
+{
+ struct amd_iommu *iommu = irqd->chip_data;
+ struct irq_cfg *cfg = irqd_cfg(irqd);
+ union intcapxt xt;
+
+ xt.capxt = 0ULL;
+ xt.dest_mode_logical = apic->dest_mode_logical;
+ xt.vector = cfg->vector;
+ xt.destid_0_23 = cfg->dest_apicid & GENMASK(23, 0);
+ xt.destid_24_31 = cfg->dest_apicid >> 24;
+
+ /**
+ * Current IOMMU implementation uses the same IRQ for all
+ * 3 IOMMU interrupts.
+ */
+ writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_EVT_OFFSET);
+ writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_PPR_OFFSET);
+ writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_GALOG_OFFSET);
+}
+
+static void intcapxt_mask_irq(struct irq_data *irqd)
+{
+ struct amd_iommu *iommu = irqd->chip_data;
+
+ writeq(0, iommu->mmio_base + MMIO_INTCAPXT_EVT_OFFSET);
+ writeq(0, iommu->mmio_base + MMIO_INTCAPXT_PPR_OFFSET);
+ writeq(0, iommu->mmio_base + MMIO_INTCAPXT_GALOG_OFFSET);
+}
+
+
static int intcapxt_set_affinity(struct irq_data *irqd,
const struct cpumask *mask, bool force)
{
@@ -2096,8 +2098,7 @@ static int intcapxt_set_affinity(struct irq_data *irqd,
ret = parent->chip->irq_set_affinity(parent, mask, force);
if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
return ret;
-
- return intcapxt_irqdomain_activate(irqd->domain, irqd, false);
+ return 0;
}
static struct irq_chip intcapxt_controller = {
--
2.34.1
From: Waiman Long <[email protected]>
[ Upstream commit c86ff8c55b8ae68837b2fa59dc0c203907e9a15f ]
Since commit db3a34e17433 ("clocksource: Retry clock read if long delays
detected") and commit 2e27e793e280 ("clocksource: Reduce clocksource-skew
threshold"), it is found that tsc clocksource fallback to hpet can
sometimes happen on both Intel and AMD systems especially when they are
running stressful benchmarking workloads. Of the 23 systems tested with
a v5.14 kernel, 10 of them have switched to hpet clock source during
the test run.
The result of falling back to hpet is a drastic reduction of performance
when running benchmarks. For example, the fio performance tests can
drop up to 70% whereas the iperf3 performance can drop up to 80%.
4 hpet fallbacks happened during bootup. They were:
[ 8.749399] clocksource: timekeeping watchdog on CPU13: hpet read-back delay of 263750ns, attempt 4, marking unstable
[ 12.044610] clocksource: timekeeping watchdog on CPU19: hpet read-back delay of 186166ns, attempt 4, marking unstable
[ 17.336941] clocksource: timekeeping watchdog on CPU28: hpet read-back delay of 182291ns, attempt 4, marking unstable
[ 17.518565] clocksource: timekeeping watchdog on CPU34: hpet read-back delay of 252196ns, attempt 4, marking unstable
Other fallbacks happen when the systems were running stressful
benchmarks. For example:
[ 2685.867873] clocksource: timekeeping watchdog on CPU117: hpet read-back delay of 57269ns, attempt 4, marking unstable
[46215.471228] clocksource: timekeeping watchdog on CPU8: hpet read-back delay of 61460ns, attempt 4, marking unstable
Commit 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold"),
changed the skew margin from 100us to 50us. I think this is too small
and can easily be exceeded when running some stressful workloads on a
thermally stressed system. So it is switched back to 100us.
Even a maximum skew margin of 100us may be too small in for some systems
when booting up especially if those systems are under thermal stress. To
eliminate the case that the large skew is due to the system being too
busy slowing down the reading of both the watchdog and the clocksource,
an extra consecutive read of watchdog clock is being done to check this.
The consecutive watchdog read delay is compared against
WATCHDOG_MAX_SKEW/2. If the delay exceeds the limit, we assume that
the system is just too busy. A warning will be printed to the console
and the clock skew check is skipped for this round.
Fixes: db3a34e17433 ("clocksource: Retry clock read if long delays detected")
Fixes: 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold")
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/time/clocksource.c | 50 ++++++++++++++++++++++++++++++++-------
1 file changed, 41 insertions(+), 9 deletions(-)
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index b8a14d2fb5ba6..bcad1a1e5dcf1 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -107,7 +107,7 @@ static u64 suspend_start;
* This delay could be due to SMIs, NMIs, or to VCPU preemptions. Used as
* a lower bound for cs->uncertainty_margin values when registering clocks.
*/
-#define WATCHDOG_MAX_SKEW (50 * NSEC_PER_USEC)
+#define WATCHDOG_MAX_SKEW (100 * NSEC_PER_USEC)
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
static void clocksource_watchdog_work(struct work_struct *work);
@@ -205,17 +205,24 @@ EXPORT_SYMBOL_GPL(max_cswd_read_retries);
static int verify_n_cpus = 8;
module_param(verify_n_cpus, int, 0644);
-static bool cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
+enum wd_read_status {
+ WD_READ_SUCCESS,
+ WD_READ_UNSTABLE,
+ WD_READ_SKIP
+};
+
+static enum wd_read_status cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
{
unsigned int nretries;
- u64 wd_end, wd_delta;
- int64_t wd_delay;
+ u64 wd_end, wd_end2, wd_delta;
+ int64_t wd_delay, wd_seq_delay;
for (nretries = 0; nretries <= max_cswd_read_retries; nretries++) {
local_irq_disable();
*wdnow = watchdog->read(watchdog);
*csnow = cs->read(cs);
wd_end = watchdog->read(watchdog);
+ wd_end2 = watchdog->read(watchdog);
local_irq_enable();
wd_delta = clocksource_delta(wd_end, *wdnow, watchdog->mask);
@@ -226,13 +233,34 @@ static bool cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
pr_warn("timekeeping watchdog on CPU%d: %s retried %d times before success\n",
smp_processor_id(), watchdog->name, nretries);
}
- return true;
+ return WD_READ_SUCCESS;
}
+
+ /*
+ * Now compute delay in consecutive watchdog read to see if
+ * there is too much external interferences that cause
+ * significant delay in reading both clocksource and watchdog.
+ *
+ * If consecutive WD read-back delay > WATCHDOG_MAX_SKEW/2,
+ * report system busy, reinit the watchdog and skip the current
+ * watchdog test.
+ */
+ wd_delta = clocksource_delta(wd_end2, wd_end, watchdog->mask);
+ wd_seq_delay = clocksource_cyc2ns(wd_delta, watchdog->mult, watchdog->shift);
+ if (wd_seq_delay > WATCHDOG_MAX_SKEW/2)
+ goto skip_test;
}
pr_warn("timekeeping watchdog on CPU%d: %s read-back delay of %lldns, attempt %d, marking unstable\n",
smp_processor_id(), watchdog->name, wd_delay, nretries);
- return false;
+ return WD_READ_UNSTABLE;
+
+skip_test:
+ pr_info("timekeeping watchdog on CPU%d: %s wd-wd read-back delay of %lldns\n",
+ smp_processor_id(), watchdog->name, wd_seq_delay);
+ pr_info("wd-%s-wd read-back delay of %lldns, clock-skew test skipped!\n",
+ cs->name, wd_delay);
+ return WD_READ_SKIP;
}
static u64 csnow_mid;
@@ -356,6 +384,7 @@ static void clocksource_watchdog(struct timer_list *unused)
int next_cpu, reset_pending;
int64_t wd_nsec, cs_nsec;
struct clocksource *cs;
+ enum wd_read_status read_ret;
u32 md;
spin_lock(&watchdog_lock);
@@ -373,9 +402,12 @@ static void clocksource_watchdog(struct timer_list *unused)
continue;
}
- if (!cs_watchdog_read(cs, &csnow, &wdnow)) {
- /* Clock readout unreliable, so give it up. */
- __clocksource_unstable(cs);
+ read_ret = cs_watchdog_read(cs, &csnow, &wdnow);
+
+ if (read_ret != WD_READ_SUCCESS) {
+ if (read_ret == WD_READ_UNSTABLE)
+ /* Clock readout unreliable, so give it up. */
+ __clocksource_unstable(cs);
continue;
}
--
2.34.1
From: Maxim Levitsky <[email protected]>
[ Upstream commit 575f5cfb13c84f324f9898383fa4a5694e53c9ef ]
iommu->intcapxt_notify field is no longer used
after a switch to a separate domain was done
Fixes: d1adcfbb520c ("iommu/amd: Fix IOMMU interrupt generation in X2APIC mode")
Signed-off-by: Maxim Levitsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/amd_iommu_types.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/iommu/amd/amd_iommu_types.h b/drivers/iommu/amd/amd_iommu_types.h
index 8dbe61e2b3c15..8394c2787ff89 100644
--- a/drivers/iommu/amd/amd_iommu_types.h
+++ b/drivers/iommu/amd/amd_iommu_types.h
@@ -643,8 +643,6 @@ struct amd_iommu {
/* DebugFS Info */
struct dentry *debugfs;
#endif
- /* IRQ notifier for IntCapXT interrupt */
- struct irq_affinity_notify intcapxt_notify;
};
static inline struct amd_iommu *dev_to_amd_iommu(struct device *dev)
--
2.34.1
From: Bart Van Assche <[email protected]>
[ Upstream commit 21ad0e49085deb22c094f91f9da57319a97188e4 ]
The driver data pointer must be set before any callbacks are registered
that use that pointer. Hence move the initialization of that pointer from
after the ufshcd_init() call to inside ufshcd_init().
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3b1d05807a9a ("[SCSI] ufs: Segregate PCI Specific Code")
Reported-by: Alexey Dobriyan <[email protected]>
Tested-by: Bean Huo <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/tc-dwc-g210-pci.c | 1 -
drivers/scsi/ufs/ufshcd-pci.c | 2 --
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 --
drivers/scsi/ufs/ufshcd.c | 7 +++++++
4 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
index 679289e1a78e6..7b08e2e07cc5f 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
+++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
@@ -110,7 +110,6 @@ tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return err;
}
- pci_set_drvdata(pdev, hba);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_allow(&pdev->dev);
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index f725248ba57f4..f76692053ca17 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -538,8 +538,6 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return err;
}
- pci_set_drvdata(pdev, hba);
-
hba->vops = (struct ufs_hba_variant_ops *)id->driver_data;
err = ufshcd_init(hba, mmio_base, pdev->irq);
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index eaeae83b999fd..8b16bbbcb806c 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -361,8 +361,6 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
goto dealloc_host;
}
- platform_set_drvdata(pdev, hba);
-
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 31adf25e57b0d..300bf00765d5b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -9366,6 +9366,13 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
struct device *dev = hba->dev;
char eh_wq_name[sizeof("ufs_eh_wq_00")];
+ /*
+ * dev_set_drvdata() must be called before any callbacks are registered
+ * that use dev_get_drvdata() (frequency scaling, clock scaling, hwmon,
+ * sysfs).
+ */
+ dev_set_drvdata(dev, hba);
+
if (!mmio_base) {
dev_err(hba->dev,
"Invalid memory reference for mmio_base is NULL\n");
--
2.34.1
From: Jack Wang <[email protected]>
[ Upstream commit 925cac6358677d3d64f9b25f205eeb3d31c9f7f8 ]
The type of min_latency is ktime_t, so use KTIME_MAX to initialize the
initial value.
Fixes: dc3b66a0ce70 ("RDMA/rtrs-clt: Add a minimum latency multipath policy")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jack Wang <[email protected]>
Reviewed-by: Guoqing Jiang <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index bc8824b4ee0d4..55ebe01ec9951 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -867,7 +867,7 @@ static struct rtrs_clt_sess *get_next_path_min_latency(struct path_it *it)
struct rtrs_clt_sess *min_path = NULL;
struct rtrs_clt *clt = it->clt;
struct rtrs_clt_sess *sess;
- ktime_t min_latency = INT_MAX;
+ ktime_t min_latency = KTIME_MAX;
ktime_t latency;
list_for_each_entry_rcu(sess, &clt->paths_list, s.entry) {
--
2.34.1
From: Reiji Watanabe <[email protected]>
[ Upstream commit f0616abd4e67143b45b04b565839148458857347 ]
Currently, clear_page() uses DC ZVA instruction unconditionally. But it
should make sure that DCZID_EL0.DZP, which indicates whether or not use
of DC ZVA instruction is prohibited, is zero when using the instruction.
Use STNP instead when DCZID_EL0.DZP == 1.
Fixes: f27bb139c387 ("arm64: Miscellaneous library functions")
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/lib/clear_page.S | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/lib/clear_page.S b/arch/arm64/lib/clear_page.S
index b84b179edba3a..1fd5d790ab800 100644
--- a/arch/arm64/lib/clear_page.S
+++ b/arch/arm64/lib/clear_page.S
@@ -16,6 +16,7 @@
*/
SYM_FUNC_START_PI(clear_page)
mrs x1, dczid_el0
+ tbnz x1, #4, 2f /* Branch if DC ZVA is prohibited */
and w1, w1, #0xf
mov x2, #4
lsl x1, x2, x1
@@ -25,5 +26,14 @@ SYM_FUNC_START_PI(clear_page)
tst x0, #(PAGE_SIZE - 1)
b.ne 1b
ret
+
+2: stnp xzr, xzr, [x0]
+ stnp xzr, xzr, [x0, #16]
+ stnp xzr, xzr, [x0, #32]
+ stnp xzr, xzr, [x0, #48]
+ add x0, x0, #64
+ tst x0, #(PAGE_SIZE - 1)
+ b.ne 2b
+ ret
SYM_FUNC_END_PI(clear_page)
EXPORT_SYMBOL(clear_page)
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 8dbdcc7269a83305ee9d677b75064d3530a48ee2 ]
In dib8000_init(), the variable fe is not freed or passed out on the
failure of dib8000_identify(&state->i2c), which could lead to a memleak.
Fix this bug by adding a kfree of fe in the error path.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DVB_DIB8000=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 77e2c0f5d471 ("V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/dvb-frontends/dib8000.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index bb02354a48b81..d67f2dd997d06 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -4473,8 +4473,10 @@ static struct dvb_frontend *dib8000_init(struct i2c_adapter *i2c_adap, u8 i2c_ad
state->timf_default = cfg->pll->timf;
- if (dib8000_identify(&state->i2c) == 0)
+ if (dib8000_identify(&state->i2c) == 0) {
+ kfree(fe);
goto error;
+ }
dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
--
2.34.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 7770a39d7c63faec6c4f33666d49a8cb664d0482 ]
copy_user_offload() will actually push a struct struct xfrm_user_offload,
which is different than (struct xfrm_state *)->xso
(struct xfrm_state_offload)
Fixes: d77e38e612a01 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Steffen Klassert <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 3a3cb09eec122..11574314de09f 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -3058,7 +3058,7 @@ static inline unsigned int xfrm_sa_len(struct xfrm_state *x)
if (x->props.extra_flags)
l += nla_total_size(sizeof(x->props.extra_flags));
if (x->xso.dev)
- l += nla_total_size(sizeof(x->xso));
+ l += nla_total_size(sizeof(struct xfrm_user_offload));
if (x->props.smark.v | x->props.smark.m) {
l += nla_total_size(sizeof(x->props.smark.v));
l += nla_total_size(sizeof(x->props.smark.m));
--
2.34.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit 5b557298d7d09cce04e0565a535fbca63661724a ]
The commit f60e7074902a ("misc: at25: Make use of device property API")
made a good job by enabling the driver for non-OF platforms, but the
recent commit 604288bc6196 ("nvmem: eeprom: at25: fix type compiler warnings")
brought that back.
Restore greatness of the driver once again.
Fixes: eab61fb1cc2e ("nvmem: eeprom: at25: fram discovery simplification")
Fixes: fd307a4ad332 ("nvmem: prepare basics for FRAM support")
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/eeprom/at25.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index b38978a3b3ffa..9193b812bc07e 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -17,8 +17,6 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/property.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/math.h>
/*
@@ -380,13 +378,14 @@ static int at25_probe(struct spi_device *spi)
int sr;
u8 id[FM25_ID_LEN];
u8 sernum[FM25_SN_LEN];
+ bool is_fram;
int i;
- const struct of_device_id *match;
- bool is_fram = 0;
- match = of_match_device(of_match_ptr(at25_of_match), &spi->dev);
- if (match && !strcmp(match->compatible, "cypress,fm25"))
- is_fram = 1;
+ err = device_property_match_string(&spi->dev, "compatible", "cypress,fm25");
+ if (err >= 0)
+ is_fram = true;
+ else
+ is_fram = false;
at25 = devm_kzalloc(&spi->dev, sizeof(struct at25_data), GFP_KERNEL);
if (!at25)
--
2.34.1
From: Christian A. Ehrhardt <[email protected]>
[ Upstream commit 8cd07657177006b67cc1610e4466cc75ad781c05 ]
Commit c8b4f0865e82 reduced delays related to cs42l42 jack
detection. However, the change was too aggressive. As a result
internal speakers on DELL Inspirion 3501 are not detected.
Increase the delay in cs42l42_run_jack_detect() a bit.
Fixes: c8b4f0865e82 ("ALSA: hda/cs8409: Remove unnecessary delays")
Signed-off-by: Christian A. Ehrhardt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_cs8409.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_cs8409.c b/sound/pci/hda/patch_cs8409.c
index 039b9f2f8e947..bf5d7f0c6ba55 100644
--- a/sound/pci/hda/patch_cs8409.c
+++ b/sound/pci/hda/patch_cs8409.c
@@ -628,8 +628,8 @@ static void cs42l42_run_jack_detect(struct sub_codec *cs42l42)
cs8409_i2c_write(cs42l42, 0x1b74, 0x07);
cs8409_i2c_write(cs42l42, 0x131b, 0xFD);
cs8409_i2c_write(cs42l42, 0x1120, 0x80);
- /* Wait ~100us*/
- usleep_range(100, 200);
+ /* Wait ~20ms*/
+ usleep_range(20000, 25000);
cs8409_i2c_write(cs42l42, 0x111f, 0x77);
cs8409_i2c_write(cs42l42, 0x1120, 0xc0);
}
--
2.34.1
From: Nicholas Kazlauskas <[email protected]>
[ Upstream commit d374d3b493215d637b9e7be12a93f22caf4c1f97 ]
[Why]
During dcn31_stream_encoder_create, if PHYC/D get remapped to F/G on B0
then we'll index 5 or 6 into a array of length 5 - leading to an
access violation on some configs during device creation.
[How]
Software won't be touching PHYF/PHYG directly, so just extend the
array to cover all possible engine IDs.
Even if it does by try to access one of these registers by accident
the offset will be 0 and we'll get a warning during the access.
Fixes: 2fe9a0e1173f ("drm/amd/display: Fix DCN3 B0 DP Alt Mapping")
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
index 0fe570717ba01..d4fe5352421fc 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
@@ -470,7 +470,8 @@ static const struct dcn30_afmt_mask afmt_mask = {
SE_DCN3_REG_LIST(id)\
}
-static const struct dcn10_stream_enc_registers stream_enc_regs[] = {
+/* Some encoders won't be initialized here - but they're logical, not physical. */
+static const struct dcn10_stream_enc_registers stream_enc_regs[ENGINE_ID_COUNT] = {
stream_enc_regs(0),
stream_enc_regs(1),
stream_enc_regs(2),
--
2.34.1
From: Ammar Faizi <[email protected]>
[ Upstream commit 18dbfcdedc802f9500b2c29794f22a31d27639c0 ]
Commit 930914b7d528fc ("powerpc/xive: Add a debugfs file to dump
internal XIVE state") forgot to add a null check.
Add it.
Fixes: 930914b7d528fc6b0249bffc00564100bcf6ef75 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Signed-off-by: Ammar Faizi <[email protected]>
Reviewed-by: Cédric Le Goater <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/xive/spapr.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index f143b6f111ac0..1179632560b8d 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -653,6 +653,9 @@ static int xive_spapr_debug_show(struct seq_file *m, void *private)
struct xive_irq_bitmap *xibm;
char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
list_for_each_entry(xibm, &xive_irq_bitmaps, list) {
memset(buf, 0, PAGE_SIZE);
bitmap_print_to_pagebuf(true, buf, xibm->bitmap, xibm->count);
--
2.34.1
From: Maxim Levitsky <[email protected]>
[ Upstream commit 1980105e3cfc2215c75b4f6b172661d675c467d1 ]
Use IRQCHIP_MASK_ON_SUSPEND to make the core irq code to
mask the iommu interrupt on suspend and unmask it on the resume.
Since now the unmask function updates the INTX settings,
that will restore them on resume from s3/s4.
Since IRQCHIP_MASK_ON_SUSPEND is only effective for interrupts
which are not wakeup sources, remove IRQCHIP_SKIP_SET_WAKE flag
and instead implement a dummy .irq_set_wake which doesn't allow
the interrupt to become a wakeup source.
Fixes: 66929812955bb ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/init.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index a826de8c99c45..50e5a728f12a1 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -2101,6 +2101,11 @@ static int intcapxt_set_affinity(struct irq_data *irqd,
return 0;
}
+static int intcapxt_set_wake(struct irq_data *irqd, unsigned int on)
+{
+ return on ? -EOPNOTSUPP : 0;
+}
+
static struct irq_chip intcapxt_controller = {
.name = "IOMMU-MSI",
.irq_unmask = intcapxt_unmask_irq,
@@ -2108,7 +2113,8 @@ static struct irq_chip intcapxt_controller = {
.irq_ack = irq_chip_ack_parent,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_affinity = intcapxt_set_affinity,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .irq_set_wake = intcapxt_set_wake,
+ .flags = IRQCHIP_MASK_ON_SUSPEND,
};
static const struct irq_domain_ops intcapxt_domain_ops = {
--
2.34.1
From: Kamal Heib <[email protected]>
[ Upstream commit e375b9c92985e409c4bb95dd43d34915ea7f5e28 ]
The API for ib_query_qp requires the driver to set cur_qp_state on return,
add the missing set.
Fixes: 67bbc05512d8 ("RDMA/cxgb4: Add query_qp support")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/cxgb4/qp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index d20b4ef2c853d..ffbd9a89981e7 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -2460,6 +2460,7 @@ int c4iw_ib_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
memset(attr, 0, sizeof(*attr));
memset(init_attr, 0, sizeof(*init_attr));
attr->qp_state = to_ib_qp_state(qhp->attr.state);
+ attr->cur_qp_state = to_ib_qp_state(qhp->attr.state);
init_attr->cap.max_send_wr = qhp->attr.sq_num_entries;
init_attr->cap.max_recv_wr = qhp->attr.rq_num_entries;
init_attr->cap.max_send_sge = qhp->attr.sq_max_sges;
--
2.34.1
From: Trevor Wu <[email protected]>
[ Upstream commit 30e693ee82d20361f2caacca3b68c79e1a7cb16c ]
mt8195_cg_patch is used to reset the default value of audio cg, so the
register value could be consistent with CCF reference count.
Nevertheless, AUDIO_TOP_CON1[1:0] is used to control an internal mux,
and it's expected to keep the default value 0.
This patch corrects the default value in case an unexpected behavior
happens in the future.
Fixes: 6746cc8582599 ("ASoC: mediatek: mt8195: add platform driver")
Signed-off-by: Trevor Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c b/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
index 6635c3f72eccc..2edb40fe27ccb 100644
--- a/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
+++ b/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
@@ -3028,7 +3028,7 @@ static const struct reg_sequence mt8195_afe_reg_defaults[] = {
static const struct reg_sequence mt8195_cg_patch[] = {
{ AUDIO_TOP_CON0, 0xfffffffb },
- { AUDIO_TOP_CON1, 0xfffffffa },
+ { AUDIO_TOP_CON1, 0xfffffff8 },
};
static int mt8195_afe_init_registers(struct mtk_base_afe *afe)
--
2.34.1
From: Alan Stern <[email protected]>
[ Upstream commit 6e1fcab00a23f7fe9f4fe9704905a790efa1eeab ]
John Garry reported a deadlock that occurs when trying to access a
runtime-suspended SATA device. For obscure reasons, the rescan procedure
causes the link to be hard-reset, which disconnects the device.
The rescan tries to carry out a runtime resume when accessing the device.
scsi_rescan_device() holds the SCSI device lock and won't release it until
it can put commands onto the device's block queue. This can't happen until
the queue is successfully runtime-resumed or the device is unregistered.
But the runtime resume fails because the device is disconnected, and
__scsi_remove_device() can't do the unregistration because it can't get the
device lock.
The best way to resolve this deadlock appears to be to allow the block
queue to start running again even after an unsuccessful runtime resume.
The idea is that the driver or the SCSI error handler will need to be able
to use the queue to resolve the runtime resume failure.
This patch removes the err argument to blk_post_runtime_resume() and makes
the routine act as though the resume was successful always. This fixes the
deadlock.
Link: https://lore.kernel.org/r/[email protected]
Fixes: e27829dc92e5 ("scsi: serialize ->rescan against ->remove")
Reported-and-tested-by: John Garry <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-pm.c | 22 +++++++---------------
drivers/scsi/scsi_pm.c | 2 +-
include/linux/blk-pm.h | 2 +-
3 files changed, 9 insertions(+), 17 deletions(-)
diff --git a/block/blk-pm.c b/block/blk-pm.c
index 17bd020268d42..2dad62cc15727 100644
--- a/block/blk-pm.c
+++ b/block/blk-pm.c
@@ -163,27 +163,19 @@ EXPORT_SYMBOL(blk_pre_runtime_resume);
/**
* blk_post_runtime_resume - Post runtime resume processing
* @q: the queue of the device
- * @err: return value of the device's runtime_resume function
*
* Description:
- * Update the queue's runtime status according to the return value of the
- * device's runtime_resume function. If the resume was successful, call
- * blk_set_runtime_active() to do the real work of restarting the queue.
+ * For historical reasons, this routine merely calls blk_set_runtime_active()
+ * to do the real work of restarting the queue. It does this regardless of
+ * whether the device's runtime-resume succeeded; even if it failed the
+ * driver or error handler will need to communicate with the device.
*
* This function should be called near the end of the device's
* runtime_resume callback.
*/
-void blk_post_runtime_resume(struct request_queue *q, int err)
+void blk_post_runtime_resume(struct request_queue *q)
{
- if (!q->dev)
- return;
- if (!err) {
- blk_set_runtime_active(q);
- } else {
- spin_lock_irq(&q->queue_lock);
- q->rpm_status = RPM_SUSPENDED;
- spin_unlock_irq(&q->queue_lock);
- }
+ blk_set_runtime_active(q);
}
EXPORT_SYMBOL(blk_post_runtime_resume);
@@ -201,7 +193,7 @@ EXPORT_SYMBOL(blk_post_runtime_resume);
* runtime PM status and re-enable peeking requests from the queue. It
* should be called before first request is added to the queue.
*
- * This function is also called by blk_post_runtime_resume() for successful
+ * This function is also called by blk_post_runtime_resume() for
* runtime resumes. It does everything necessary to restart the queue.
*/
void blk_set_runtime_active(struct request_queue *q)
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index 3717eea37ecb3..e91a0a5bc7a3e 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -262,7 +262,7 @@ static int sdev_runtime_resume(struct device *dev)
blk_pre_runtime_resume(sdev->request_queue);
if (pm && pm->runtime_resume)
err = pm->runtime_resume(dev);
- blk_post_runtime_resume(sdev->request_queue, err);
+ blk_post_runtime_resume(sdev->request_queue);
return err;
}
diff --git a/include/linux/blk-pm.h b/include/linux/blk-pm.h
index b80c65aba2493..2580e05a8ab67 100644
--- a/include/linux/blk-pm.h
+++ b/include/linux/blk-pm.h
@@ -14,7 +14,7 @@ extern void blk_pm_runtime_init(struct request_queue *q, struct device *dev);
extern int blk_pre_runtime_suspend(struct request_queue *q);
extern void blk_post_runtime_suspend(struct request_queue *q, int err);
extern void blk_pre_runtime_resume(struct request_queue *q);
-extern void blk_post_runtime_resume(struct request_queue *q, int err);
+extern void blk_post_runtime_resume(struct request_queue *q);
extern void blk_set_runtime_active(struct request_queue *q);
#else
static inline void blk_pm_runtime_init(struct request_queue *q,
--
2.34.1
From: Sicelo A. Mhlongo <[email protected]>
[ Upstream commit e9af026a3b24f59d7af4609f73e0ef60a4d6d516 ]
Since the LED multicolor framework support was added in commit
92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <[email protected]>
Signed-off-by: Sicelo A. Mhlongo <[email protected]>
Signed-off-by: Pavel Machek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap3-n900.dts | 50 +++++++++++++++++++++++++-------
1 file changed, 40 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 32335d4ce478b..d40c3d2c4914e 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -8,6 +8,7 @@
#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/*
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -630,63 +631,92 @@
};
lp5523: lp5523@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
- enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+ enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
- chan0 {
+ led@0 {
+ reg = <0>;
chan-name = "lp5523:kb1";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan1 {
+ led@1 {
+ reg = <1>;
chan-name = "lp5523:kb2";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan2 {
+ led@2 {
+ reg = <2>;
chan-name = "lp5523:kb3";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan3 {
+ led@3 {
+ reg = <3>;
chan-name = "lp5523:kb4";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan4 {
+ led@4 {
+ reg = <4>;
chan-name = "lp5523:b";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
};
- chan5 {
+ led@5 {
+ reg = <5>;
chan-name = "lp5523:g";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
};
- chan6 {
+ led@6 {
+ reg = <6>;
chan-name = "lp5523:r";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
};
- chan7 {
+ led@7 {
+ reg = <7>;
chan-name = "lp5523:kb5";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan8 {
+ led@8 {
+ reg = <8>;
chan-name = "lp5523:kb6";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
};
--
2.34.1
From: Mansur Alisha Shaik <[email protected]>
[ Upstream commit 91f2b7d269e5c885c38c7ffa261f5276bd42f907 ]
In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.
Crash logs:
[ 1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48
[ 1.908493] Modules linked in:
[ 1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35 f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c
[ 1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
[ 1.928673] pstate: 60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--)
[ 1.934608] pc : opp_debug_remove_one+0x2c/0x48
[ 1.939080] lr : opp_debug_remove_one+0x2c/0x48
[ 1.943560] sp : ffffffc011d7b7f0
[ 1.946836] pmr_save: 000000e0
[ 1.949854] x29: ffffffc011d7b7f0 x28: ffffffc010733bbc
[ 1.955104] x27: ffffffc010733ba8 x26: ffffff8083cedd00
[ 1.960355] x25: 0000000000000001 x24: 0000000000000000
[ 1.965603] x23: ffffff8083cc2878 x22: ffffff8083ceb900
[ 1.970852] x21: ffffff8083ceb910 x20: ffffff8083cc2800
[ 1.976101] x19: ffffff8083ceb900 x18: 00000000ffff0a10
[ 1.981352] x17: ffffff80837a5620 x16: 00000000000000ec
[ 1.986601] x15: ffffffc010519ad4 x14: 0000000000000003
[ 1.991849] x13: 0000000000000004 x12: 0000000000000001
[ 1.997100] x11: c0000000ffffdfff x10: 00000000ffffffff
[ 2.002348] x9 : d2627c580300dc00 x8 : d2627c580300dc00
[ 2.007596] x7 : 0720072007200720 x6 : ffffff80802ecf00
[ 2.012845] x5 : 0000000000190004 x4 : 0000000000000000
[ 2.018094] x3 : ffffffc011d7b478 x2 : ffffffc011d7b480
[ 2.023343] x1 : 00000000ffffdfff x0 : 0000000000000017
[ 2.028594] Call trace:
[ 2.031022] opp_debug_remove_one+0x2c/0x48
[ 2.035160] dev_pm_opp_put+0x94/0xb0
[ 2.038780] _opp_remove_all+0x7c/0xc8
[ 2.042486] _opp_remove_all_static+0x54/0x7c
[ 2.046796] dev_pm_opp_remove_table+0x74/0x98
[ 2.051183] devm_pm_opp_of_table_release+0x18/0x24
[ 2.056001] devm_action_release+0x1c/0x28
[ 2.060053] release_nodes+0x23c/0x2b8
[ 2.063760] devres_release_group+0xcc/0xd0
[ 2.067900] component_bind+0xac/0x168
[ 2.071608] component_bind_all+0x98/0x124
[ 2.075664] msm_drm_bind+0x1e8/0x678
[ 2.079287] try_to_bring_up_master+0x60/0x134
[ 2.083674] component_master_add_with_match+0xd8/0x120
[ 2.088834] msm_pdev_probe+0x20c/0x2a0
[ 2.092629] platform_drv_probe+0x9c/0xbc
[ 2.096598] really_probe+0x11c/0x46c
[ 2.100217] driver_probe_device+0x8c/0xf0
[ 2.104270] device_driver_attach+0x54/0x78
[ 2.108407] __driver_attach+0x48/0x148
[ 2.112201] bus_for_each_dev+0x88/0xd4
[ 2.115998] driver_attach+0x2c/0x38
[ 2.119534] bus_add_driver+0x10c/0x200
[ 2.123330] driver_register+0x6c/0x104
[ 2.127122] __platform_driver_register+0x4c/0x58
[ 2.131767] msm_drm_register+0x6c/0x70
[ 2.135560] do_one_initcall+0x64/0x23c
[ 2.139357] do_initcall_level+0xac/0x15c
[ 2.143321] do_initcalls+0x5c/0x9c
[ 2.146778] do_basic_setup+0x2c/0x38
[ 2.150401] kernel_init_freeable+0xf8/0x15c
[ 2.154622] kernel_init+0x1c/0x11c
[ 2.158079] ret_from_fork+0x10/0x30
[ 2.161615] ---[ end trace a2cc45a0f784b212 ]---
[ 2.166272] Removing OPP: 300000000
Signed-off-by: Mansur Alisha Shaik <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../media/platform/qcom/venus/pm_helpers.c | 28 +++++++++----------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index d382872bc8a08..a591dd315ebcc 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -163,14 +163,12 @@ static u32 load_per_type(struct venus_core *core, u32 session_type)
struct venus_inst *inst = NULL;
u32 mbs_per_sec = 0;
- mutex_lock(&core->lock);
list_for_each_entry(inst, &core->instances, list) {
if (inst->session_type != session_type)
continue;
mbs_per_sec += load_per_instance(inst);
}
- mutex_unlock(&core->lock);
return mbs_per_sec;
}
@@ -219,14 +217,12 @@ static int load_scale_bw(struct venus_core *core)
struct venus_inst *inst = NULL;
u32 mbs_per_sec, avg, peak, total_avg = 0, total_peak = 0;
- mutex_lock(&core->lock);
list_for_each_entry(inst, &core->instances, list) {
mbs_per_sec = load_per_instance(inst);
mbs_to_bw(inst, mbs_per_sec, &avg, &peak);
total_avg += avg;
total_peak += peak;
}
- mutex_unlock(&core->lock);
/*
* keep minimum bandwidth vote for "video-mem" path,
@@ -253,8 +249,9 @@ static int load_scale_v1(struct venus_inst *inst)
struct device *dev = core->dev;
u32 mbs_per_sec;
unsigned int i;
- int ret;
+ int ret = 0;
+ mutex_lock(&core->lock);
mbs_per_sec = load_per_type(core, VIDC_SESSION_TYPE_ENC) +
load_per_type(core, VIDC_SESSION_TYPE_DEC);
@@ -279,17 +276,19 @@ set_freq:
if (ret) {
dev_err(dev, "failed to set clock rate %lu (%d)\n",
freq, ret);
- return ret;
+ goto exit;
}
ret = load_scale_bw(core);
if (ret) {
dev_err(dev, "failed to set bandwidth (%d)\n",
ret);
- return ret;
+ goto exit;
}
- return 0;
+exit:
+ mutex_unlock(&core->lock);
+ return ret;
}
static int core_get_v1(struct venus_core *core)
@@ -1116,13 +1115,13 @@ static int load_scale_v4(struct venus_inst *inst)
struct device *dev = core->dev;
unsigned long freq = 0, freq_core1 = 0, freq_core2 = 0;
unsigned long filled_len = 0;
- int i, ret;
+ int i, ret = 0;
for (i = 0; i < inst->num_input_bufs; i++)
filled_len = max(filled_len, inst->payloads[i]);
if (inst->session_type == VIDC_SESSION_TYPE_DEC && !filled_len)
- return 0;
+ return ret;
freq = calculate_inst_freq(inst, filled_len);
inst->clk_data.freq = freq;
@@ -1138,7 +1137,6 @@ static int load_scale_v4(struct venus_inst *inst)
freq_core2 += inst->clk_data.freq;
}
}
- mutex_unlock(&core->lock);
freq = max(freq_core1, freq_core2);
@@ -1162,17 +1160,19 @@ set_freq:
if (ret) {
dev_err(dev, "failed to set clock rate %lu (%d)\n",
freq, ret);
- return ret;
+ goto exit;
}
ret = load_scale_bw(core);
if (ret) {
dev_err(dev, "failed to set bandwidth (%d)\n",
ret);
- return ret;
+ goto exit;
}
- return 0;
+exit:
+ mutex_unlock(&core->lock);
+ return ret;
}
static const struct venus_pm_ops pm_ops_v4 = {
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit f1cb3476e48b60c450ec3a1d7da0805bffc6e43a ]
rsi_get_* functions rely on an offset variable from usb
input. The size of usb input is RSI_MAX_RX_USB_PKT_SIZE(3000),
while 2-byte offset can be up to 0xFFFF. Thus a large offset
can cause out-of-bounds read.
The patch adds a bound checking condition when rcv_pkt_len is 0,
indicating it's USB. It's unclear whether this is triggerable
from other type of bus. The following check might help in that case.
offset > rcv_pkt_len - FRAME_DESC_SZ
The bug is trigerrable with conpromised/malfunctioning USB devices.
I tested the patch with the crashing input and got no more bug report.
Attached is the KASAN report from fuzzing.
BUG: KASAN: slab-out-of-bounds in rsi_read_pkt+0x42e/0x500 [rsi_91x]
Read of size 2 at addr ffff888019439fdb by task RX-Thread/227
CPU: 0 PID: 227 Comm: RX-Thread Not tainted 5.6.0 #66
Call Trace:
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
__kasan_report.cold+0x37/0x7c
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
kasan_report+0xe/0x20
rsi_read_pkt+0x42e/0x500 [rsi_91x]
rsi_usb_rx_thread+0x1b1/0x2fc [rsi_usb]
? rsi_probe+0x16a0/0x16a0 [rsi_usb]
? _raw_spin_lock_irqsave+0x7b/0xd0
? _raw_spin_trylock_bh+0x120/0x120
? __wake_up_common+0x10b/0x520
? rsi_probe+0x16a0/0x16a0 [rsi_usb]
kthread+0x2b5/0x3b0
? kthread_create_on_node+0xd0/0xd0
ret_from_fork+0x22/0x40
Reported-by: Brendan Dolan-Gavitt <[email protected]>
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_main.c | 4 ++++
drivers/net/wireless/rsi/rsi_91x_usb.c | 1 -
drivers/net/wireless/rsi/rsi_usb.h | 2 ++
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index f1bf71e6c6081..5d1490fc32db4 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -23,6 +23,7 @@
#include "rsi_common.h"
#include "rsi_coex.h"
#include "rsi_hal.h"
+#include "rsi_usb.h"
u32 rsi_zone_enabled = /* INFO_ZONE |
INIT_ZONE |
@@ -168,6 +169,9 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
frame_desc = &rx_pkt[index];
actual_length = *(u16 *)&frame_desc[0];
offset = *(u16 *)&frame_desc[2];
+ if (!rcv_pkt_len && offset >
+ RSI_MAX_RX_USB_PKT_SIZE - FRAME_DESC_SZ)
+ goto fail;
queueno = rsi_get_queueno(frame_desc, offset);
length = rsi_get_length(frame_desc, offset);
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 3cca1823c458a..66fe386ec9cc6 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -330,7 +330,6 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t mem_flags)
struct sk_buff *skb;
u8 dword_align_bytes = 0;
-#define RSI_MAX_RX_USB_PKT_SIZE 3000
skb = dev_alloc_skb(RSI_MAX_RX_USB_PKT_SIZE);
if (!skb)
return -ENOMEM;
diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h
index 254d19b664123..961851748bc4c 100644
--- a/drivers/net/wireless/rsi/rsi_usb.h
+++ b/drivers/net/wireless/rsi/rsi_usb.h
@@ -44,6 +44,8 @@
#define RSI_USB_BUF_SIZE 4096
#define RSI_USB_CTRL_BUF_SIZE 0x04
+#define RSI_MAX_RX_USB_PKT_SIZE 3000
+
struct rx_usb_ctrl_block {
u8 *data;
struct urb *rx_urb;
--
2.34.1
From: Athira Rajeev <[email protected]>
[ Upstream commit 2c9ac51b850d84ee496b0a5d832ce66d411ae552 ]
Running perf fuzzer showed below in dmesg logs:
"Can't find PMC that caused IRQ"
This means a PMU exception happened, but none of the PMC's (Performance
Monitor Counter) were found to be overflown. There are some corner cases
that clears the PMCs after PMI gets masked. In such cases, the perf
interrupt handler will not find the active PMC values that had caused
the overflow and thus leads to this message while replaying.
Case 1: PMU Interrupt happens during replay of other interrupts and
counter values gets cleared by PMU callbacks before replay:
During replay of interrupts like timer, __do_irq() and doorbell
exception, we conditionally enable interrupts via may_hard_irq_enable().
This could potentially create a window to generate a PMI. Since irq soft
mask is set to ALL_DISABLED, the PMI will get masked here. We could get
IPIs run before perf interrupt is replayed and the PMU events could
be deleted or stopped. This will change the PMU SPR values and resets
the counters. Snippet of ftrace log showing PMU callbacks invoked in
__do_irq():
<idle>-0 [051] dns. 132025441306354: __do_irq <-call_do_irq
<idle>-0 [051] dns. 132025441306430: irq_enter <-__do_irq
<idle>-0 [051] dns. 132025441306503: irq_enter_rcu <-__do_irq
<idle>-0 [051] dnH. 132025441306599: xive_get_irq <-__do_irq
<<>>
<idle>-0 [051] dnH. 132025441307770: generic_smp_call_function_single_interrupt <-smp_ipi_demux_relaxed
<idle>-0 [051] dnH. 132025441307839: flush_smp_call_function_queue <-smp_ipi_demux_relaxed
<idle>-0 [051] dnH. 132025441308057: _raw_spin_lock <-event_function
<idle>-0 [051] dnH. 132025441308206: power_pmu_disable <-perf_pmu_disable
<idle>-0 [051] dnH. 132025441308337: power_pmu_del <-event_sched_out
<idle>-0 [051] dnH. 132025441308407: power_pmu_read <-power_pmu_del
<idle>-0 [051] dnH. 132025441308477: read_pmc <-power_pmu_read
<idle>-0 [051] dnH. 132025441308590: isa207_disable_pmc <-power_pmu_del
<idle>-0 [051] dnH. 132025441308663: write_pmc <-power_pmu_del
<idle>-0 [051] dnH. 132025441308787: power_pmu_event_idx <-perf_event_update_userpage
<idle>-0 [051] dnH. 132025441308859: rcu_read_unlock_strict <-perf_event_update_userpage
<idle>-0 [051] dnH. 132025441308975: power_pmu_enable <-perf_pmu_enable
<<>>
<idle>-0 [051] dnH. 132025441311108: irq_exit <-__do_irq
<idle>-0 [051] dns. 132025441311319: performance_monitor_exception <-replay_soft_interrupts
Case 2: PMI's masked during local_* operations, example local_add(). If
the local_add() operation happens within a local_irq_save(), replay of
PMI will be during local_irq_restore(). Similar to case 1, this could
also create a window before replay where PMU events gets deleted or
stopped.
Fix it by updating the PMU callback function power_pmu_disable() to
check for pending perf interrupt. If there is an overflown PMC and
pending perf interrupt indicated in paca, clear the PMI bit in paca to
drop that sample. Clearing of PMI bit is done in power_pmu_disable()
since disable is invoked before any event gets deleted/stopped. With
this fix, if there are more than one event running in the PMU, there is
a chance that we clear the PMI bit for the event which is not getting
deleted/stopped. The other events may still remain active. Hence to make
sure we don't drop valid sample in such cases, another check is added in
power_pmu_enable. This checks if there is an overflown PMC found among
the active events and if so enable back the PMI bit. Two new helper
functions are introduced to clear/set the PMI, ie
clear_pmi_irq_pending() and set_pmi_irq_pending(). Helper function
pmi_irq_pending() is introduced to give a warning if there is pending
PMI bit in paca, but no PMC is overflown.
Also there are corner cases which result in performance monitor
interrupts being triggered during power_pmu_disable(). This happens
since PMXE bit is not cleared along with disabling of other MMCR0 bits
in the pmu_disable. Such PMI's could leave the PMU running and could
trigger PMI again which will set MMCR0 PMAO bit. This could lead to
spurious interrupts in some corner cases. Example, a timer after
power_pmu_del() which will re-enable interrupts and triggers a PMI again
since PMAO bit is still set. But fails to find valid overflow since PMC
was cleared in power_pmu_del(). Fix that by disabling PMXE along with
disabling of other MMCR0 bits in power_pmu_disable().
We can't just replay PMI any time. Hence this approach is preferred
rather than replaying PMI before resetting overflown PMC. Patch also
documents core-book3s on a race condition which can trigger these PMC
messages during idle path in PowerNV.
Fixes: f442d004806e ("powerpc/64s: Add support to mask perf interrupts and replay them")
Reported-by: Nageswara R Sastry <[email protected]>
Suggested-by: Nicholas Piggin <[email protected]>
Suggested-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Nageswara R Sastry <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
[mpe: Make pmi_irq_pending() return bool, reflow/reword some comments]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/hw_irq.h | 40 +++++++++++++++++++++
arch/powerpc/perf/core-book3s.c | 58 ++++++++++++++++++++++++++++++-
2 files changed, 97 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 21cc571ea9c2d..5c98a950eca0d 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -224,6 +224,42 @@ static inline bool arch_irqs_disabled(void)
return arch_irqs_disabled_flags(arch_local_save_flags());
}
+static inline void set_pmi_irq_pending(void)
+{
+ /*
+ * Invoked from PMU callback functions to set PMI bit in the paca.
+ * This has to be called with irq's disabled (via hard_irq_disable()).
+ */
+ if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+ WARN_ON_ONCE(mfmsr() & MSR_EE);
+
+ get_paca()->irq_happened |= PACA_IRQ_PMI;
+}
+
+static inline void clear_pmi_irq_pending(void)
+{
+ /*
+ * Invoked from PMU callback functions to clear the pending PMI bit
+ * in the paca.
+ */
+ if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+ WARN_ON_ONCE(mfmsr() & MSR_EE);
+
+ get_paca()->irq_happened &= ~PACA_IRQ_PMI;
+}
+
+static inline bool pmi_irq_pending(void)
+{
+ /*
+ * Invoked from PMU callback functions to check if there is a pending
+ * PMI bit in the paca.
+ */
+ if (get_paca()->irq_happened & PACA_IRQ_PMI)
+ return true;
+
+ return false;
+}
+
#ifdef CONFIG_PPC_BOOK3S
/*
* To support disabling and enabling of irq with PMI, set of
@@ -408,6 +444,10 @@ static inline void do_hard_irq_enable(void)
BUILD_BUG();
}
+static inline void clear_pmi_irq_pending(void) { }
+static inline void set_pmi_irq_pending(void) { }
+static inline bool pmi_irq_pending(void) { return false; }
+
static inline void irq_soft_mask_regs_set_state(struct pt_regs *regs, unsigned long val)
{
}
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 73e62e9b179bc..bef6b1abce702 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -857,6 +857,19 @@ static void write_pmc(int idx, unsigned long val)
}
}
+static int any_pmc_overflown(struct cpu_hw_events *cpuhw)
+{
+ int i, idx;
+
+ for (i = 0; i < cpuhw->n_events; i++) {
+ idx = cpuhw->event[i]->hw.idx;
+ if ((idx) && ((int)read_pmc(idx) < 0))
+ return idx;
+ }
+
+ return 0;
+}
+
/* Called from sysrq_handle_showregs() */
void perf_event_print_debug(void)
{
@@ -1281,11 +1294,13 @@ static void power_pmu_disable(struct pmu *pmu)
/*
* Set the 'freeze counters' bit, clear EBE/BHRBA/PMCC/PMAO/FC56
+ * Also clear PMXE to disable PMI's getting triggered in some
+ * corner cases during PMU disable.
*/
val = mmcr0 = mfspr(SPRN_MMCR0);
val |= MMCR0_FC;
val &= ~(MMCR0_EBE | MMCR0_BHRBA | MMCR0_PMCC | MMCR0_PMAO |
- MMCR0_FC56);
+ MMCR0_PMXE | MMCR0_FC56);
/* Set mmcr0 PMCCEXT for p10 */
if (ppmu->flags & PPMU_ARCH_31)
val |= MMCR0_PMCCEXT;
@@ -1299,6 +1314,23 @@ static void power_pmu_disable(struct pmu *pmu)
mb();
isync();
+ /*
+ * Some corner cases could clear the PMU counter overflow
+ * while a masked PMI is pending. One such case is when
+ * a PMI happens during interrupt replay and perf counter
+ * values are cleared by PMU callbacks before replay.
+ *
+ * If any PMC corresponding to the active PMU events are
+ * overflown, disable the interrupt by clearing the paca
+ * bit for PMI since we are disabling the PMU now.
+ * Otherwise provide a warning if there is PMI pending, but
+ * no counter is found overflown.
+ */
+ if (any_pmc_overflown(cpuhw))
+ clear_pmi_irq_pending();
+ else
+ WARN_ON(pmi_irq_pending());
+
val = mmcra = cpuhw->mmcr.mmcra;
/*
@@ -1390,6 +1422,15 @@ static void power_pmu_enable(struct pmu *pmu)
* (possibly updated for removal of events).
*/
if (!cpuhw->n_added) {
+ /*
+ * If there is any active event with an overflown PMC
+ * value, set back PACA_IRQ_PMI which would have been
+ * cleared in power_pmu_disable().
+ */
+ hard_irq_disable();
+ if (any_pmc_overflown(cpuhw))
+ set_pmi_irq_pending();
+
mtspr(SPRN_MMCRA, cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE);
mtspr(SPRN_MMCR1, cpuhw->mmcr.mmcr1);
if (ppmu->flags & PPMU_ARCH_31)
@@ -2337,6 +2378,14 @@ static void __perf_event_interrupt(struct pt_regs *regs)
break;
}
}
+
+ /*
+ * Clear PACA_IRQ_PMI in case it was set by
+ * set_pmi_irq_pending() when PMU was enabled
+ * after accounting for interrupts.
+ */
+ clear_pmi_irq_pending();
+
if (!active)
/* reset non active counters that have overflowed */
write_pmc(i + 1, 0);
@@ -2356,6 +2405,13 @@ static void __perf_event_interrupt(struct pt_regs *regs)
}
}
}
+
+ /*
+ * During system wide profling or while specific CPU is monitored for an
+ * event, some corner cases could cause PMC to overflow in idle path. This
+ * will trigger a PMI after waking up from idle. Since counter values are _not_
+ * saved/restored in idle path, can lead to below "Can't find PMC" message.
+ */
if (unlikely(!found) && !arch_irq_disabled_regs(regs))
printk_ratelimited(KERN_WARNING "Can't find PMC that caused IRQ\n");
--
2.34.1
From: Niklas Söderlund <[email protected]>
[ Upstream commit 49bcb1506f2e095262c01bda7fd1c0db524c91e2 ]
When converting the thermal-zones bindings to yaml the definition of the
contribution property changed. The intention is the same, an integer
value expressing a ratio of a sum on how much cooling is provided by the
device to the zone. But after the conversion the integer value is
limited to the range 0 to 100 and expressed as a percentage.
This is problematic for two reasons.
- This do not match how the binding is used. Out of the 18 files that
make use of the property only two (ste-dbx5x0.dtsi and
ste-hrefv60plus.dtsi) sets it at a value that satisfy the binding,
100. The remaining 16 files set the value higher and fail to validate.
- Expressing the value as a percentage instead of a ratio of the sum is
confusing as there is nothing to enforce the sum in the zone is not
greater then 100.
This patch restore the pre yaml conversion description and removes the
value limitation allowing the usage of the bindings to validate.
Fixes: 1202a442a31fd2e5 ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Reported-by: Kieran Bingham <[email protected]>
Signed-off-by: Niklas Söderlund <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../devicetree/bindings/thermal/thermal-zones.yaml | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index a07de5ed0ca6a..2d34f3ccb2572 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -199,12 +199,11 @@ patternProperties:
contribution:
$ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 100
description:
- The percentage contribution of the cooling devices at the
- specific trip temperature referenced in this map
- to this thermal zone
+ The cooling contribution to the thermal zone of the referred
+ cooling device at the referred trip point. The contribution is
+ a ratio of the sum of all cooling contributions within a
+ thermal zone.
required:
- trip
--
2.34.1
From: Christian A. Ehrhardt <[email protected]>
[ Upstream commit 57f234248ff925d88caedf4019ec84e6ecb83909 ]
The suspend code unconditionally sets ->hp_jack_in and ->mic_jack_in
to zero but without reporting this status change to the HDA core.
To compensate for this, always assume a status change on the
first unsol event after boot or resume.
Fixes: 424e531b47f8 ("ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary")
Signed-off-by: Christian A. Ehrhardt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_cs8409-tables.c | 3 +++
sound/pci/hda/patch_cs8409.c | 5 ++++-
sound/pci/hda/patch_cs8409.h | 1 +
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_cs8409-tables.c b/sound/pci/hda/patch_cs8409-tables.c
index 0fb0a428428b4..df0b4522babf7 100644
--- a/sound/pci/hda/patch_cs8409-tables.c
+++ b/sound/pci/hda/patch_cs8409-tables.c
@@ -252,6 +252,7 @@ struct sub_codec cs8409_cs42l42_codec = {
.init_seq_num = ARRAY_SIZE(cs42l42_init_reg_seq),
.hp_jack_in = 0,
.mic_jack_in = 0,
+ .force_status_change = 1,
.paged = 1,
.suspended = 1,
.no_type_dect = 0,
@@ -443,6 +444,7 @@ struct sub_codec dolphin_cs42l42_0 = {
.init_seq_num = ARRAY_SIZE(dolphin_c0_init_reg_seq),
.hp_jack_in = 0,
.mic_jack_in = 0,
+ .force_status_change = 1,
.paged = 1,
.suspended = 1,
.no_type_dect = 0,
@@ -456,6 +458,7 @@ struct sub_codec dolphin_cs42l42_1 = {
.init_seq_num = ARRAY_SIZE(dolphin_c1_init_reg_seq),
.hp_jack_in = 0,
.mic_jack_in = 0,
+ .force_status_change = 1,
.paged = 1,
.suspended = 1,
.no_type_dect = 1,
diff --git a/sound/pci/hda/patch_cs8409.c b/sound/pci/hda/patch_cs8409.c
index bf5d7f0c6ba55..aff2b5abb81ea 100644
--- a/sound/pci/hda/patch_cs8409.c
+++ b/sound/pci/hda/patch_cs8409.c
@@ -636,7 +636,9 @@ static void cs42l42_run_jack_detect(struct sub_codec *cs42l42)
static int cs42l42_handle_tip_sense(struct sub_codec *cs42l42, unsigned int reg_ts_status)
{
- int status_changed = 0;
+ int status_changed = cs42l42->force_status_change;
+
+ cs42l42->force_status_change = 0;
/* TIP_SENSE INSERT/REMOVE */
switch (reg_ts_status) {
@@ -791,6 +793,7 @@ static void cs42l42_suspend(struct sub_codec *cs42l42)
cs42l42->last_page = 0;
cs42l42->hp_jack_in = 0;
cs42l42->mic_jack_in = 0;
+ cs42l42->force_status_change = 1;
/* Put CS42L42 into Reset */
gpio_data = snd_hda_codec_read(codec, CS8409_PIN_AFG, 0, AC_VERB_GET_GPIO_DATA, 0);
diff --git a/sound/pci/hda/patch_cs8409.h b/sound/pci/hda/patch_cs8409.h
index ade2b838590cf..d0b725c7285b6 100644
--- a/sound/pci/hda/patch_cs8409.h
+++ b/sound/pci/hda/patch_cs8409.h
@@ -305,6 +305,7 @@ struct sub_codec {
unsigned int hp_jack_in:1;
unsigned int mic_jack_in:1;
+ unsigned int force_status_change:1;
unsigned int suspended:1;
unsigned int paged:1;
unsigned int last_page;
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 2167c0b205960607fb136b4bb3c556a62be1569a ]
The return value of device_property_read_u32_array() is not always 0.
To catch the exception in case that devm_kzalloc failed and the
rt5663->imp_table was NULL, which caused the failure of
device_property_read_u32_array.
Fixes: 450f0f6a8fb4 ("ASoC: rt5663: Add the manual offset field to compensate the DC offset")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5663.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index be9fc58ff6812..ee09ccd448dcd 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -3461,6 +3461,7 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663)
static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)
{
int table_size;
+ int ret;
device_property_read_u32(dev, "realtek,dc_offset_l_manual",
&rt5663->pdata.dc_offset_l_manual);
@@ -3477,9 +3478,11 @@ static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)
table_size = sizeof(struct impedance_mapping_table) *
rt5663->pdata.impedance_sensing_num;
rt5663->imp_table = devm_kzalloc(dev, table_size, GFP_KERNEL);
- device_property_read_u32_array(dev,
+ ret = device_property_read_u32_array(dev,
"realtek,impedance_sensing_table",
(u32 *)rt5663->imp_table, table_size);
+ if (ret)
+ return ret;
}
return 0;
@@ -3504,8 +3507,11 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
if (pdata)
rt5663->pdata = *pdata;
- else
- rt5663_parse_dp(rt5663, &i2c->dev);
+ else {
+ ret = rt5663_parse_dp(rt5663, &i2c->dev);
+ if (ret)
+ return ret;
+ }
for (i = 0; i < ARRAY_SIZE(rt5663->supplies); i++)
rt5663->supplies[i].supply = rt5663_supply_names[i];
--
2.34.1
From: Bixuan Cui <[email protected]>
[ Upstream commit 8e7daf318d97f25e18b2fc7eb5909e34cd903575 ]
Fix compile error when OSS_DEBUG is enabled:
sound/core/oss/pcm_oss.c: In function 'snd_pcm_oss_set_trigger':
sound/core/oss/pcm_oss.c:2055:10: error: 'substream' undeclared (first
use in this function); did you mean 'csubstream'?
pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger);
^
Fixes: 61efcee8608c ("ALSA: oss: Use standard printk helpers")
Signed-off-by: Bixuan Cui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/oss/pcm_oss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 20a0a4771b9a8..3ee9edf858156 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2065,7 +2065,7 @@ static int snd_pcm_oss_set_trigger(struct snd_pcm_oss_file *pcm_oss_file, int tr
int err, cmd;
#ifdef OSS_DEBUG
- pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger);
+ pr_debug("pcm_oss: trigger = 0x%x\n", trigger);
#endif
psubstream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK];
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 1e583aef12aa74afd37c1418255cc4b74e023236 ]
The vendor ID of Presonus Studio 1810c had a superfluous '0' in its
USB ID. Drop it.
Fixes: 8dc5efe3d17c ("ALSA: usb-audio: Add support for Presonus Studio 1810c")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/format.c | 2 +-
sound/usb/mixer_quirks.c | 2 +-
sound/usb/quirks.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/usb/format.c b/sound/usb/format.c
index f5e676a51b30d..405dc0bf6678c 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -375,7 +375,7 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
for (rate = min; rate <= max; rate += res) {
/* Filter out invalid rates on Presonus Studio 1810c */
- if (chip->usb_id == USB_ID(0x0194f, 0x010c) &&
+ if (chip->usb_id == USB_ID(0x194f, 0x010c) &&
!s1810c_valid_sample_rate(fp, rate))
goto skip_rate;
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 823b6b8de942d..d48729e6a3b0a 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3254,7 +3254,7 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
err = snd_rme_controls_create(mixer);
break;
- case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
+ case USB_ID(0x194f, 0x010c): /* Presonus Studio 1810c */
err = snd_sc1810_init_mixer(mixer);
break;
case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 64e1c20311ed4..ab9f3da49941f 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1290,7 +1290,7 @@ int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
if (chip->usb_id == USB_ID(0x0763, 0x2012))
return fasttrackpro_skip_setting_quirk(chip, iface, altno);
/* presonus studio 1810c: skip altsets incompatible with device_setup */
- if (chip->usb_id == USB_ID(0x0194f, 0x010c))
+ if (chip->usb_id == USB_ID(0x194f, 0x010c))
return s1810c_skip_setting_quirk(chip, iface, altno);
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit b07e3c6ebc0c20c772c0f54042e430acec2945c3 ]
When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.
The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.
Attached is the kasan report from fuzzing.
BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb]
Read of size 4 at addr ffff8880188e5930 by task modprobe/231
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__kasan_report.cold+0x37/0x7c
? dma_direct_unmap_page+0x90/0x110
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
kasan_report+0xe/0x20
rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __usb_hcd_giveback_urb+0x380/0x380
? apic_timer_interrupt+0xa/0x20
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
? handle_irq_event+0xcd/0x157
? handle_edge_irq+0x1eb/0x7b0
irq_exit+0x114/0x140
do_IRQ+0x91/0x1e0
common_interrupt+0xf/0xf
</IRQ>
Reported-by: Brendan Dolan-Gavitt <[email protected]>
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/YXxQL/vIiYcZUu/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_usb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 6821ea9918956..3cca1823c458a 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -269,8 +269,12 @@ static void rsi_rx_done_handler(struct urb *urb)
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)rx_cb->data;
int status = -EINVAL;
+ if (!rx_cb->rx_skb)
+ return;
+
if (urb->status) {
dev_kfree_skb(rx_cb->rx_skb);
+ rx_cb->rx_skb = NULL;
return;
}
@@ -294,8 +298,10 @@ out:
if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
- if (status)
+ if (status) {
dev_kfree_skb(rx_cb->rx_skb);
+ rx_cb->rx_skb = NULL;
+ }
}
static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
--
2.34.1
From: Sriram R <[email protected]>
[ Upstream commit a93789ae541c7d5c1c2a4942013adb6bcc5e2848 ]
Currently 'ar' reference is not added in skb_cb during
WMI mgmt tx. Though this is generally not used during tx completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence
fill them during tx call for proper usage.
Also free the skb which is missing currently in these
callbacks.
Crash_info:
[19282.489476] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[19282.489515] pgd = 91eb8000
[19282.496702] [00000000] *pgd=00000000
[19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k]
[19282.789170] LR is at idr_for_each+0xa0/0xc8
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2
Signed-off-by: Sriram R <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 35 +++++++++++++++------------
1 file changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index f8f973ef150e2..3834be1587057 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <net/mac80211.h>
@@ -4136,23 +4137,32 @@ static int __ath11k_set_antenna(struct ath11k *ar, u32 tx_ant, u32 rx_ant)
return 0;
}
-int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx)
+static void ath11k_mac_tx_mgmt_free(struct ath11k *ar, int buf_id)
{
- struct sk_buff *msdu = skb;
+ struct sk_buff *msdu;
struct ieee80211_tx_info *info;
- struct ath11k *ar = ctx;
- struct ath11k_base *ab = ar->ab;
spin_lock_bh(&ar->txmgmt_idr_lock);
- idr_remove(&ar->txmgmt_idr, buf_id);
+ msdu = idr_remove(&ar->txmgmt_idr, buf_id);
spin_unlock_bh(&ar->txmgmt_idr_lock);
- dma_unmap_single(ab->dev, ATH11K_SKB_CB(msdu)->paddr, msdu->len,
+
+ if (!msdu)
+ return;
+
+ dma_unmap_single(ar->ab->dev, ATH11K_SKB_CB(msdu)->paddr, msdu->len,
DMA_TO_DEVICE);
info = IEEE80211_SKB_CB(msdu);
memset(&info->status, 0, sizeof(info->status));
ieee80211_free_txskb(ar->hw, msdu);
+}
+
+int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx)
+{
+ struct ath11k *ar = ctx;
+
+ ath11k_mac_tx_mgmt_free(ar, buf_id);
return 0;
}
@@ -4161,17 +4171,10 @@ static int ath11k_mac_vif_txmgmt_idr_remove(int buf_id, void *skb, void *ctx)
{
struct ieee80211_vif *vif = ctx;
struct ath11k_skb_cb *skb_cb = ATH11K_SKB_CB((struct sk_buff *)skb);
- struct sk_buff *msdu = skb;
struct ath11k *ar = skb_cb->ar;
- struct ath11k_base *ab = ar->ab;
- if (skb_cb->vif == vif) {
- spin_lock_bh(&ar->txmgmt_idr_lock);
- idr_remove(&ar->txmgmt_idr, buf_id);
- spin_unlock_bh(&ar->txmgmt_idr_lock);
- dma_unmap_single(ab->dev, skb_cb->paddr, msdu->len,
- DMA_TO_DEVICE);
- }
+ if (skb_cb->vif == vif)
+ ath11k_mac_tx_mgmt_free(ar, buf_id);
return 0;
}
@@ -4186,6 +4189,8 @@ static int ath11k_mac_mgmt_tx_wmi(struct ath11k *ar, struct ath11k_vif *arvif,
int buf_id;
int ret;
+ ATH11K_SKB_CB(skb)->ar = ar;
+
spin_lock_bh(&ar->txmgmt_idr_lock);
buf_id = idr_alloc(&ar->txmgmt_idr, skb, 0,
ATH11K_TX_MGMT_NUM_PENDING_MAX, GFP_ATOMIC);
--
2.34.1
From: Wen Gong <[email protected]>
[ Upstream commit ed05c7cf1286d7e31e7623bce55ff135723591bf ]
When enable debug config, it print below warning while shut down wlan
interface shuh as run "ifconfig wlan0 down".
The reason is because ar->regd_update_work is ran once, and it is will
call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.
Below warning disappeared after this change.
[ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)
[ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan
[ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0
[ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0
[ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0
[ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20
[ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error
[ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0
[ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0
[ 914.117583] ======================================================
[ 914.117592] WARNING: possible circular locking dependency detected
[ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE
[ 914.117611] ------------------------------------------------------
[ 914.117618] ifconfig/2805 is trying to acquire lock:
[ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470
[ 914.117674]
but task is already holding lock:
[ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.117872]
which lock already depends on the new lock.
[ 914.117880]
the existing dependency chain (in reverse order) is:
[ 914.117888]
-> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}:
[ 914.117910] __mutex_lock+0xa0/0x9c0
[ 914.117930] mutex_lock_nested+0x1b/0x20
[ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211]
[ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211]
[ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211]
[ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211]
[ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k]
[ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k]
[ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k]
[ 914.118656] process_one_work+0x228/0x670
[ 914.118669] worker_thread+0x4d/0x440
[ 914.118680] kthread+0x16d/0x1b0
[ 914.118697] ret_from_fork+0x22/0x30
[ 914.118714]
-> #2 (rtnl_mutex){+.+.}-{4:4}:
[ 914.118736] __mutex_lock+0xa0/0x9c0
[ 914.118751] mutex_lock_nested+0x1b/0x20
[ 914.118767] rtnl_lock+0x17/0x20
[ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k]
[ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k]
[ 914.118897] process_one_work+0x228/0x670
[ 914.118909] worker_thread+0x4d/0x440
[ 914.118920] kthread+0x16d/0x1b0
[ 914.118934] ret_from_fork+0x22/0x30
[ 914.118948]
-> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}:
[ 914.118972] process_one_work+0x1fa/0x670
[ 914.118984] worker_thread+0x4d/0x440
[ 914.118996] kthread+0x16d/0x1b0
[ 914.119010] ret_from_fork+0x22/0x30
[ 914.119023]
-> #0 ((wq_completion)phy0){+.+.}-{0:0}:
[ 914.119045] __lock_acquire+0x146d/0x1cf0
[ 914.119057] lock_acquire+0x19b/0x360
[ 914.119067] flush_workqueue+0xae/0x470
[ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211]
[ 914.119409] ieee80211_stop+0x45/0x180 [mac80211]
[ 914.119557] __dev_close_many+0xb3/0x120
[ 914.119573] __dev_change_flags+0xc3/0x1d0
[ 914.119590] dev_change_flags+0x29/0x70
[ 914.119605] devinet_ioctl+0x653/0x810
[ 914.119620] inet_ioctl+0x193/0x1e0
[ 914.119631] sock_do_ioctl+0x4d/0xf0
[ 914.119649] sock_ioctl+0x262/0x340
[ 914.119665] __x64_sys_ioctl+0x96/0xd0
[ 914.119678] do_syscall_64+0x3d/0xd0
[ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 914.119709]
other info that might help us debug this:
[ 914.119717] Chain exists of:
(wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx
[ 914.119745] Possible unsafe locking scenario:
[ 914.119752] CPU0 CPU1
[ 914.119758] ---- ----
[ 914.119765] lock(&rdev->wiphy.mtx);
[ 914.119778] lock(rtnl_mutex);
[ 914.119792] lock(&rdev->wiphy.mtx);
[ 914.119807] lock((wq_completion)phy0);
[ 914.119819]
*** DEADLOCK ***
[ 914.119827] 2 locks held by ifconfig/2805:
[ 914.119837] #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20
[ 914.119872] #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.120039]
stack backtrace:
[ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1
[ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
[ 914.120074] Call Trace:
[ 914.120084] <TASK>
[ 914.120094] dump_stack_lvl+0x73/0xa4
[ 914.120119] dump_stack+0x10/0x12
[ 914.120135] print_circular_bug.isra.44+0x221/0x2e0
[ 914.120165] check_noncircular+0x106/0x150
[ 914.120203] __lock_acquire+0x146d/0x1cf0
[ 914.120215] ? __lock_acquire+0x146d/0x1cf0
[ 914.120245] lock_acquire+0x19b/0x360
[ 914.120259] ? flush_workqueue+0x87/0x470
[ 914.120286] ? lockdep_init_map_type+0x6b/0x250
[ 914.120310] flush_workqueue+0xae/0x470
[ 914.120327] ? flush_workqueue+0x87/0x470
[ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150
[ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211]
[ 914.120906] ieee80211_stop+0x45/0x180 [mac80211]
[ 914.121060] __dev_close_many+0xb3/0x120
[ 914.121081] __dev_change_flags+0xc3/0x1d0
[ 914.121109] dev_change_flags+0x29/0x70
[ 914.121131] devinet_ioctl+0x653/0x810
[ 914.121149] ? __might_fault+0x77/0x80
[ 914.121179] inet_ioctl+0x193/0x1e0
[ 914.121194] ? inet_ioctl+0x193/0x1e0
[ 914.121218] ? __might_fault+0x77/0x80
[ 914.121238] ? _copy_to_user+0x68/0x80
[ 914.121266] sock_do_ioctl+0x4d/0xf0
[ 914.121283] ? inet_stream_connect+0x60/0x60
[ 914.121297] ? sock_do_ioctl+0x4d/0xf0
[ 914.121329] sock_ioctl+0x262/0x340
[ 914.121347] ? sock_ioctl+0x262/0x340
[ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280
[ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50
[ 914.121416] __x64_sys_ioctl+0x96/0xd0
[ 914.121430] ? br_ioctl_call+0x90/0x90
[ 914.121445] ? __x64_sys_ioctl+0x96/0xd0
[ 914.121465] do_syscall_64+0x3d/0xd0
[ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 914.121497] RIP: 0033:0x7f0ed051737b
[ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48
[ 914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b
[ 914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004
[ 914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001
[ 914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe
[ 914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000
[ 914.121620] </TASK>
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index e75e6ebdf2a65..b11070cf159cc 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5853,7 +5853,7 @@ static int ath11k_reg_chan_list_event(struct ath11k_base *ab, struct sk_buff *sk
ar = ab->pdevs[pdev_idx].ar;
kfree(ab->new_regd[pdev_idx]);
ab->new_regd[pdev_idx] = regd;
- ieee80211_queue_work(ar->hw, &ar->regd_update_work);
+ queue_work(ab->workqueue, &ar->regd_update_work);
} else {
/* This regd would be applied during mac registration and is
* held constant throughout for regd intersection purpose
--
2.34.1
From: Taniya Das <[email protected]>
[ Upstream commit 9c337073d9d81a145434b22f42dc3128ecd17730 ]
The gcc cfg noc lpass clock is required to be always enabled for the
LPASS core and audio drivers to be functional.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gcc-sc7280.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index 6cefcdc869905..ce7c5ba2b9b7a 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -2998,7 +2998,7 @@ static struct clk_branch gcc_cfg_noc_lpass_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_cfg_noc_lpass_clk",
- .ops = &clk_branch2_ops,
+ .ops = &clk_branch2_aon_ops,
},
},
};
--
2.34.1
From: Michael Ellerman <[email protected]>
[ Upstream commit fd1eaaaaa6864b5fb8f99880fcefb49760b8fe4e ]
When CONFIG_PPC_RFI_SRR_DEBUG=y we check the SRR values before returning
from interrupts. This is done in asm using EMIT_BUG_ENTRY, and passing
BUGFLAG_WARNING.
However that fails to create an exception table entry for the warning,
and so do_program_check() fails the exception table search and proceeds
to call _exception(), resulting in an oops like:
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 2 PID: 1204 Comm: sigreturn_unali Tainted: P 5.16.0-rc2-00194-g91ca3d4f77c5 #12
NIP: c00000000000c5b0 LR: 0000000000000000 CTR: 0000000000000000
...
NIP [c00000000000c5b0] system_call_common+0x150/0x268
LR [0000000000000000] 0x0
Call Trace:
[c00000000db73e10] [c00000000000c558] system_call_common+0xf8/0x268 (unreliable)
...
Instruction dump:
7cc803a6 888d0931 2c240000 4082001c 38800000 988d0931 e8810170 e8a10178
7c9a03a6 7cbb03a6 7d7a02a6 e9810170 <7f0b6088> 7d7b02a6 e9810178 7f0b6088
We should instead use EMIT_WARN_ENTRY, which creates an exception table
entry for the warning, allowing the warning to be correctly recognised,
and the code to resume after printing the warning.
Note however that because this warning is buried deep in the interrupt
return path, we are not able to recover from it (due to MSR_RI being
clear), so we still end up in die() with an unrecoverable exception.
Fixes: 59dc5bfca0cb ("powerpc/64s: avoid reloading (H)SRR registers if they are still valid")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/interrupt_64.S | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/interrupt_64.S b/arch/powerpc/kernel/interrupt_64.S
index 894588b2381e5..4b1ff94e67eb4 100644
--- a/arch/powerpc/kernel/interrupt_64.S
+++ b/arch/powerpc/kernel/interrupt_64.S
@@ -32,21 +32,21 @@ COMPAT_SYS_CALL_TABLE:
ld r12,_NIP(r1)
clrrdi r12,r12,2
100: tdne r11,r12
- EMIT_BUG_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
+ EMIT_WARN_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
mfspr r11,SPRN_SRR1
ld r12,_MSR(r1)
100: tdne r11,r12
- EMIT_BUG_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
+ EMIT_WARN_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
.else
mfspr r11,SPRN_HSRR0
ld r12,_NIP(r1)
clrrdi r12,r12,2
100: tdne r11,r12
- EMIT_BUG_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
+ EMIT_WARN_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
mfspr r11,SPRN_HSRR1
ld r12,_MSR(r1)
100: tdne r11,r12
- EMIT_BUG_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
+ EMIT_WARN_ENTRY 100b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
.endif
#endif
.endm
--
2.34.1
On Mon, Jan 24, 2022 at 12:36 PM Holger Hoffstätte
<[email protected]> wrote:
>
> On 2022-01-24 19:31, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.17 release.
>
> Oh noes :(
>
> DESCEND bpf/resolve_btfids
> MKDIR /tmp/linux-5.15.17/tools/bpf/resolve_btfids//libbpf
> GEN /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/bpf_helper_defs.h
> MKDIR /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/
> CC /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf.o
> libbpf.c: In function 'bpf_object__elf_collect':
> libbpf.c:3038:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
> 3038 | if (sh->sh_type != SHT_PROGBITS)
> | ^~
> libbpf.c:3042:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
> 3042 | if (sh->sh_type != SHT_PROGBITS)
> | ^~
> make[4]: *** [/tmp/linux-5.15.17/tools/build/Makefile.build:97: /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf.o] Error 1
> make[3]: *** [Makefile:158: /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf-in.o] Error 2
> make[2]: *** [Makefile:44: /tmp/linux-5.15.17/tools/bpf/resolve_btfids//libbpf/libbpf.a] Error 2
> make[1]: *** [Makefile:72: bpf/resolve_btfids] Error 2
> make: *** [Makefile:1371: tools/bpf/resolve_btfids] Error 2
>
> Reverting "libbpf-validate-that-.btf-and-.btf.ext-sections-cont.patcht" aka
> this one:
>
> > Andrii Nakryiko <[email protected]>
> > libbpf: Validate that .BTF and .BTF.ext sections contain data
>
> makes it build & run fine. I looked for followups but couldn't find anything that
> stood out, maybe the BPF folks (cc'ed) know what's missing/wrong.
>
That small fix depends on much bigger refactoring in ad23b7238474
("libbpf: Use Elf64-specific types explicitly for dealing with ELF").
I think this small fix can be dropped.
That's sort of a general rule with libbpf-related fixes, they are
usually not that critical to backport to stable, because most users
use/build libbpf from its Github mirror, which is always taken from
latest bpf-next. Libbpf is also not supposed to be used with untrusted
inputs (i.e., BPF object files) as BPF programs are loaded into the
kernel under root.
> cheers
> Holger
From: Chao Yu <[email protected]>
commit 9056d6489f5a41cfbb67f719d2c0ce61ead72d9f upstream.
As report by Wenqing Liu in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215231
- Overview
kernel NULL pointer dereference triggered in folio_mark_dirty() when mount and operate on a crafted f2fs image
- Reproduce
tested on kernel 5.16-rc3, 5.15.X under root
1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp
4. cp tmp mnt
F2FS-fs (loop0): sanity_check_inode: inode (ino=49) extent info [5942, 4294180864, 4] is incorrect, run fsck to fix
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=31340049, run fsck to fix.
BUG: kernel NULL pointer dereference, address: 0000000000000000
folio_mark_dirty+0x33/0x50
move_data_page+0x2dd/0x460 [f2fs]
do_garbage_collect+0xc18/0x16a0 [f2fs]
f2fs_gc+0x1d3/0xd90 [f2fs]
f2fs_balance_fs+0x13a/0x570 [f2fs]
f2fs_create+0x285/0x840 [f2fs]
path_openat+0xe6d/0x1040
do_filp_open+0xc5/0x140
do_sys_openat2+0x23a/0x310
do_sys_open+0x57/0x80
The root cause is for special file: e.g. character, block, fifo or socket file,
f2fs doesn't assign address space operations pointer array for mapping->a_ops field,
so, in a fuzzed image, SSA table indicates a data block belong to special file, when
f2fs tries to migrate that block, it causes NULL pointer access once move_data_page()
calls a_ops->set_dirty_page().
Cc: [email protected]
Reported-by: Wenqing Liu <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/gc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1454,7 +1454,8 @@ next_step:
if (phase == 3) {
inode = f2fs_iget(sb, dni.ino);
- if (IS_ERR(inode) || is_bad_inode(inode))
+ if (IS_ERR(inode) || is_bad_inode(inode) ||
+ special_file(inode->i_mode))
continue;
if (!down_write_trylock(
From: Willy Tarreau <[email protected]>
commit de0244ae40ae91145faaf164a4252347607c3711 upstream.
Ammar Faizi reported that our exit code handling is wrong. We truncate
it to the lowest 8 bits but the syscall itself is expected to take a
regular 32-bit signed integer, not an unsigned char. It's the kernel
that later truncates it to the lowest 8 bits. The difference is visible
in strace, where the program below used to show exit(255) instead of
exit(-1):
int main(void)
{
return -1;
}
This patch applies the fix to all archs. x86_64, i386, arm64, armv7 and
mips were all tested and confirmed to work fine now. Risc-v was not
tested but the change is trivial and exactly the same as for other archs.
Reported-by: Ammar Faizi <[email protected]>
Cc: [email protected]
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/include/nolibc/nolibc.h | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
--- a/tools/include/nolibc/nolibc.h
+++ b/tools/include/nolibc/nolibc.h
@@ -414,7 +414,7 @@ asm(".section .text\n"
"xor %ebp, %ebp\n" // zero the stack frame
"and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned before call
"call main\n" // main() returns the status code, we'll exit with it.
- "movzb %al, %rdi\n" // retrieve exit code from 8 lower bits
+ "mov %eax, %edi\n" // retrieve exit code (32 bit)
"mov $60, %rax\n" // NR_exit == 60
"syscall\n" // really exit
"hlt\n" // ensure it does not return
@@ -602,9 +602,9 @@ asm(".section .text\n"
"push %ebx\n" // support both regparm and plain stack modes
"push %eax\n"
"call main\n" // main() returns the status code in %eax
- "movzbl %al, %ebx\n" // retrieve exit code from lower 8 bits
- "movl $1, %eax\n" // NR_exit == 1
- "int $0x80\n" // exit now
+ "mov %eax, %ebx\n" // retrieve exit code (32-bit int)
+ "movl $1, %eax\n" // NR_exit == 1
+ "int $0x80\n" // exit now
"hlt\n" // ensure it does not
"");
@@ -788,7 +788,6 @@ asm(".section .text\n"
"and %r3, %r1, $-8\n" // AAPCS : sp must be 8-byte aligned in the
"mov %sp, %r3\n" // callee, an bl doesn't push (lr=pc)
"bl main\n" // main() returns the status code, we'll exit with it.
- "and %r0, %r0, $0xff\n" // limit exit code to 8 bits
"movs r7, $1\n" // NR_exit == 1
"svc $0x00\n"
"");
@@ -985,7 +984,6 @@ asm(".section .text\n"
"add x2, x2, x1\n" // + argv
"and sp, x1, -16\n" // sp must be 16-byte aligned in the callee
"bl main\n" // main() returns the status code, we'll exit with it.
- "and x0, x0, 0xff\n" // limit exit code to 8 bits
"mov x8, 93\n" // NR_exit == 93
"svc #0\n"
"");
@@ -1190,7 +1188,7 @@ asm(".section .text\n"
"addiu $sp,$sp,-16\n" // the callee expects to save a0..a3 there!
"jal main\n" // main() returns the status code, we'll exit with it.
"nop\n" // delayed slot
- "and $a0, $v0, 0xff\n" // limit exit code to 8 bits
+ "move $a0, $v0\n" // retrieve 32-bit exit code from v0
"li $v0, 4001\n" // NR_exit == 4001
"syscall\n"
".end __start\n"
@@ -1388,7 +1386,6 @@ asm(".section .text\n"
"add a2,a2,a1\n" // + argv
"andi sp,a1,-16\n" // sp must be 16-byte aligned
"call main\n" // main() returns the status code, we'll exit with it.
- "andi a0, a0, 0xff\n" // limit exit code to 8 bits
"li a7, 93\n" // NR_exit == 93
"ecall\n"
"");
From: Dmitry Osipenko <[email protected]>
commit d5185965c3b59073c4520bad7dd2adf725b9abba upstream.
Host1x DMA buffer isn't mapped properly when CONFIG_ARM_DMA_USE_IOMMU=y.
The memory management code of Host1x driver has a longstanding overhaul
overdue and it's not obvious where the problem is in this case. Hence
let's add back the old workaround which we already had sometime before.
It explicitly detaches Host1x device from the offending implicit IOMMU
domain. This fixes a completely broken Host1x DMA in case of ARM32
multiplatform kernel config.
Cc: [email protected]
Fixes: af1cbfb9bf0f ("gpu: host1x: Support DMA mapping of buffers")
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/host1x/dev.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -18,6 +18,10 @@
#include <trace/events/host1x.h>
#undef CREATE_TRACE_POINTS
+#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)
+#include <asm/dma-iommu.h>
+#endif
+
#include "bus.h"
#include "channel.h"
#include "debug.h"
@@ -238,6 +242,17 @@ static struct iommu_domain *host1x_iommu
struct iommu_domain *domain = iommu_get_domain_for_dev(host->dev);
int err;
+#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)
+ if (host->dev->archdata.mapping) {
+ struct dma_iommu_mapping *mapping =
+ to_dma_iommu_mapping(host->dev);
+ arm_iommu_detach_device(host->dev);
+ arm_iommu_release_mapping(mapping);
+
+ domain = iommu_get_domain_for_dev(host->dev);
+ }
+#endif
+
/*
* We may not always want to enable IOMMU support (for example if the
* host1x firewall is already enabled and we don't support addressing
From: Hari Prasath <[email protected]>
commit 12f332d2dd3187472f595b678246adb10d886bd0 upstream.
The alternate function of PD20 is 4 as per the datasheet of
sama7g5 and not 5 as defined earlier.
Signed-off-by: Hari Prasath <[email protected]>
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: <[email protected]> # v5.15+
Signed-off-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/sama7g5-pinfunc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/sama7g5-pinfunc.h
+++ b/arch/arm/boot/dts/sama7g5-pinfunc.h
@@ -765,7 +765,7 @@
#define PIN_PD20__PCK0 PINMUX_PIN(PIN_PD20, 1, 3)
#define PIN_PD20__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD20, 2, 2)
#define PIN_PD20__PWMH3 PINMUX_PIN(PIN_PD20, 3, 4)
-#define PIN_PD20__CANTX4 PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__CANTX4 PINMUX_PIN(PIN_PD20, 4, 2)
#define PIN_PD20__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD20, 6, 5)
#define PIN_PD21 117
#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0)
From: Yunfei Wang <[email protected]>
commit a556cfe4cabc6d79cbb7733f118bbb420b376fe6 upstream.
In __arm_v7s_alloc_table function:
iommu call kmem_cache_alloc to allocate page table, this function
allocate memory may fail, when kmem_cache_alloc fails to allocate
table, call virt_to_phys will be abnomal and return unexpected phys
and goto out_free, then call kmem_cache_free to release table will
trigger KE, __get_free_pages and free_pages have similar problem,
so add error handle for page table allocation failure.
Fixes: 29859aeb8a6e ("iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE")
Signed-off-by: Yunfei Wang <[email protected]>
Cc: <[email protected]> # 5.10.*
Acked-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/io-pgtable-arm-v7s.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -246,13 +246,17 @@ static void *__arm_v7s_alloc_table(int l
__GFP_ZERO | ARM_V7S_TABLE_GFP_DMA, get_order(size));
else if (lvl == 2)
table = kmem_cache_zalloc(data->l2_tables, gfp);
+
+ if (!table)
+ return NULL;
+
phys = virt_to_phys(table);
if (phys != (arm_v7s_iopte)phys) {
/* Doesn't fit in PTE */
dev_err(dev, "Page table does not fit in PTE: %pa", &phys);
goto out_free;
}
- if (table && !cfg->coherent_walk) {
+ if (!cfg->coherent_walk) {
dma = dma_map_single(dev, table, size, DMA_TO_DEVICE);
if (dma_mapping_error(dev, dma))
goto out_free;
On 1/24/22 11:31 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.17 release.
> There are 846 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.17-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
From: Christophe Leroy <[email protected]>
[ Upstream commit 06e7cbc29e97b4713b4ea6def04ae8501a7d1a59 ]
As reported by Carlo, 16Mbytes is not enough with modern kernels
that tend to be a bit big, so map another 16M page at boot.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/89b5f974a7fa5011206682cd092e2c905530ff46.1632755552.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/head_40x.S | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 7d72ee5ab387c..e783860bea838 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/pgtable.h>
+#include <linux/sizes.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -650,7 +651,7 @@ start_here:
b . /* prevent prefetch past rfi */
/* Set up the initial MMU state so we can do the first level of
- * kernel initialization. This maps the first 16 MBytes of memory 1:1
+ * kernel initialization. This maps the first 32 MBytes of memory 1:1
* virtual to physical and more importantly sets the cache mode.
*/
initial_mmu:
@@ -687,6 +688,12 @@ initial_mmu:
tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
+ li r0,62 /* TLB slot 62 */
+ addis r4,r4,SZ_16M@h
+ addis r3,r3,SZ_16M@h
+ tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
+ tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
+
isync
/* Establish the exception vector base
--
2.34.1
From: Russell King (Oracle) <[email protected]>
[ Upstream commit 4e4f325a0a55907b14f579e6b1a38c53755e3de2 ]
The four RGMII interface modes take care of the required RGMII delay
configuration at the PHY and should not be limited by the network MAC
driver. Sadly, gemini was only permitting RGMII mode with no delays,
which would require the required delay to be inserted via PCB tracking
or by the MAC.
However, there are designs that require the PHY to add the delay, which
is impossible without Gemini permitting the other three PHY interface
modes. Fix the driver to allow these.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cortina/gemini.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 6e745ca4c4333..012ca11a38cc1 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -305,21 +305,21 @@ static void gmac_speed_set(struct net_device *netdev)
switch (phydev->speed) {
case 1000:
status.bits.speed = GMAC_SPEED_1000;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ if (phy_interface_mode_is_rgmii(phydev->interface))
status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
netdev_dbg(netdev, "connect %s to RGMII @ 1Gbit\n",
phydev_name(phydev));
break;
case 100:
status.bits.speed = GMAC_SPEED_100;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ if (phy_interface_mode_is_rgmii(phydev->interface))
status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
netdev_dbg(netdev, "connect %s to RGMII @ 100 Mbit\n",
phydev_name(phydev));
break;
case 10:
status.bits.speed = GMAC_SPEED_10;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ if (phy_interface_mode_is_rgmii(phydev->interface))
status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
netdev_dbg(netdev, "connect %s to RGMII @ 10 Mbit\n",
phydev_name(phydev));
@@ -389,6 +389,9 @@ static int gmac_setup_phy(struct net_device *netdev)
status.bits.mii_rmii = GMAC_PHY_GMII;
break;
case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
netdev_dbg(netdev,
"RGMII: set GMAC0 and GMAC1 to MII/RGMII mode\n");
status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 3ecb46755eb85456b459a1a9f952c52986bce8ec ]
Because of the potential failure of the ioremap(), the buf->area could
be NULL.
Therefore, we need to check it and return -ENOMEM in order to transfer
the error.
Fixes: f09aecd50f39 ("ASoC: SAMSUNG: Add I2S0 internal dma driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/samsung/idma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/samsung/idma.c b/sound/soc/samsung/idma.c
index 66bcc2f97544b..c3f1b054e2389 100644
--- a/sound/soc/samsung/idma.c
+++ b/sound/soc/samsung/idma.c
@@ -360,6 +360,8 @@ static int preallocate_idma_buffer(struct snd_pcm *pcm, int stream)
buf->addr = idma.lp_tx_addr;
buf->bytes = idma_hardware.buffer_bytes_max;
buf->area = (unsigned char * __force)ioremap(buf->addr, buf->bytes);
+ if (!buf->area)
+ return -ENOMEM;
return 0;
}
--
2.34.1
Hello!
On 1/24/22 12:31, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.17 release.
> There are 846 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.17-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Regressions detected on arm, arm64, i386, x86.
This is one from arm64:
/builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
/builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
17 | if (in_bpf_jit(regs))
| ^~~~~~~~~~
cc1: some warnings being treated as errors
make[3]: *** [/builds/linux/scripts/Makefile.build:277: arch/arm64/mm/extable.o] Error 1
This is another one, in Perf (arm, arm64, i386, x86):
libbpf.c: In function 'bpf_object__elf_collect':
libbpf.c:3038:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
3038 | if (sh->sh_type != SHT_PROGBITS)
| ^~
libbpf.c:3042:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
3042 | if (sh->sh_type != SHT_PROGBITS)
| ^~
make[4]: *** [/builds/linux/tools/build/Makefile.build:97: /home/tuxbuild/.cache/tuxmake/builds/current/staticobjs/libbpf.o] Error 1
Reported-by: Linux Kernel Functional Testing <[email protected]>
Greetings!
Daniel Díaz
[email protected]
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 8ba285874913da21ca39a46376e9cc5ce0f45f94 ]
Free up memory and resources used by temporary allocated memstream and
btf_dump instance.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Hengqi Chen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/btf_helpers.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/btf_helpers.c b/tools/testing/selftests/bpf/btf_helpers.c
index b692e6ead9b55..0a4ad7cb2c200 100644
--- a/tools/testing/selftests/bpf/btf_helpers.c
+++ b/tools/testing/selftests/bpf/btf_helpers.c
@@ -246,18 +246,23 @@ const char *btf_type_c_dump(const struct btf *btf)
d = btf_dump__new(btf, NULL, &opts, btf_dump_printf);
if (libbpf_get_error(d)) {
fprintf(stderr, "Failed to create btf_dump instance: %ld\n", libbpf_get_error(d));
- return NULL;
+ goto err_out;
}
for (i = 1; i <= btf__get_nr_types(btf); i++) {
err = btf_dump__dump_type(d, i);
if (err) {
fprintf(stderr, "Failed to dump type [%d]: %d\n", i, err);
- return NULL;
+ goto err_out;
}
}
+ btf_dump__free(d);
fflush(buf_file);
fclose(buf_file);
return buf;
+err_out:
+ btf_dump__free(d);
+ fclose(buf_file);
+ return NULL;
}
--
2.34.1
Hello!
On 1/24/22 16:50, Daniel Díaz wrote:
> Hello!
>
> On 1/24/22 12:31, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 5.15.17 release.
>> There are 846 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.17-rc1.gz
>> or in the git tree and branch at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
>
> Regressions detected on arm, arm64, i386, x86.
>
> This is one from arm64:
> /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
> 17 | if (in_bpf_jit(regs))
> | ^~~~~~~~~~
> cc1: some warnings being treated as errors
> make[3]: *** [/builds/linux/scripts/Makefile.build:277: arch/arm64/mm/extable.o] Error 1
Bisection here pointed to "arm64/bpf: Remove 128MB limit for BPF JIT programs". Reverting made the build succeed.
Greetings!
Daniel Díaz
[email protected]
From: John David Anglin <[email protected]>
[ Upstream commit 9e9d4b460f23bab61672eae397417d03917d116c ]
In handle_interruption(), we call faulthandler_disabled() to check whether the
fault handler is not disabled. If the fault handler is disabled, we immediately
call do_page_fault(). It then calls faulthandler_disabled(). If disabled,
do_page_fault() attempts to fixup the exception by jumping to no_context:
no_context:
if (!user_mode(regs) && fixup_exception(regs)) {
return;
}
parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);
Apart from the error messages, the two blocks of code perform the same
function.
We can avoid two calls to faulthandler_disabled() by a simple revision
to the code in handle_interruption().
Note: I didn't try to fix the formatting of this code block.
Signed-off-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/kernel/traps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 197cb8480350c..afe8b902a8fc4 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -784,7 +784,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
* unless pagefault_disable() was called before.
*/
- if (fault_space == 0 && !faulthandler_disabled())
+ if (faulthandler_disabled() || fault_space == 0)
{
/* Clean up and return if in exception table. */
if (fixup_exception(regs))
--
2.34.1
On 1/24/22 10:31, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.17 release.
> There are 846 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.17-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <[email protected]>
On Tue, 25 Jan 2022 at 09:09, Daniel Díaz <[email protected]> wrote:
>
> Hello!
>
> On 1/24/22 16:50, Daniel Díaz wrote:
> > Hello!
> >
> > On 1/24/22 12:31, Greg Kroah-Hartman wrote:
> >> This is the start of the stable review cycle for the 5.15.17 release.
> >> There are 846 patches in this series, all will be posted as a response
> >> to this one. If anyone has any issues with these being applied, please
> >> let me know.
> >>
> >> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> >> Anything received after that time might be too late.
> >>
> >> The whole patch series can be found in one patch at:
> >> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.17-rc1.gz
> >> or in the git tree and branch at:
> >> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> >> and the diffstat can be found below.
> >>
> >> thanks,
> >>
> >> greg k-h
> >
Regressions detected on arm, arm64, i386, x86 on 5.15 and 5.10
> >
> > This is one from arm64:
> > /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> > /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
> > 17 | if (in_bpf_jit(regs))
> > | ^~~~~~~~~~
> > cc1: some warnings being treated as errors
> > make[3]: *** [/builds/linux/scripts/Makefile.build:277: arch/arm64/mm/extable.o] Error 1
>
> Bisection here pointed to "arm64/bpf: Remove 128MB limit for BPF JIT programs". Reverting made the build succeed.
arm64/bpf: Remove 128MB limit for BPF JIT programs
commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream.
Reported-by: Linux Kernel Functional Testing <[email protected]>
> Greetings!
>
> Daniel Díaz
> [email protected]
>
On Mon, Jan 24, 2022 at 02:09:13PM -0800, Andrii Nakryiko wrote:
> On Mon, Jan 24, 2022 at 12:36 PM Holger Hoffst?tte
> <[email protected]> wrote:
> >
> > On 2022-01-24 19:31, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 5.15.17 release.
> >
> > Oh noes :(
> >
> > DESCEND bpf/resolve_btfids
> > MKDIR /tmp/linux-5.15.17/tools/bpf/resolve_btfids//libbpf
> > GEN /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/bpf_helper_defs.h
> > MKDIR /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/
> > CC /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf.o
> > libbpf.c: In function 'bpf_object__elf_collect':
> > libbpf.c:3038:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
> > 3038 | if (sh->sh_type != SHT_PROGBITS)
> > | ^~
> > libbpf.c:3042:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
> > 3042 | if (sh->sh_type != SHT_PROGBITS)
> > | ^~
> > make[4]: *** [/tmp/linux-5.15.17/tools/build/Makefile.build:97: /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf.o] Error 1
> > make[3]: *** [Makefile:158: /tmp/linux-5.15.17/tools/bpf/resolve_btfids/libbpf/staticobjs/libbpf-in.o] Error 2
> > make[2]: *** [Makefile:44: /tmp/linux-5.15.17/tools/bpf/resolve_btfids//libbpf/libbpf.a] Error 2
> > make[1]: *** [Makefile:72: bpf/resolve_btfids] Error 2
> > make: *** [Makefile:1371: tools/bpf/resolve_btfids] Error 2
> >
> > Reverting "libbpf-validate-that-.btf-and-.btf.ext-sections-cont.patcht" aka
> > this one:
> >
> > > Andrii Nakryiko <[email protected]>
> > > libbpf: Validate that .BTF and .BTF.ext sections contain data
> >
> > makes it build & run fine. I looked for followups but couldn't find anything that
> > stood out, maybe the BPF folks (cc'ed) know what's missing/wrong.
> >
>
> That small fix depends on much bigger refactoring in ad23b7238474
> ("libbpf: Use Elf64-specific types explicitly for dealing with ELF").
> I think this small fix can be dropped.
>
> That's sort of a general rule with libbpf-related fixes, they are
> usually not that critical to backport to stable, because most users
> use/build libbpf from its Github mirror, which is always taken from
> latest bpf-next. Libbpf is also not supposed to be used with untrusted
> inputs (i.e., BPF object files) as BPF programs are loaded into the
> kernel under root.
Ok, thanks, I'll drop this from all queues now.
greg k-h
On Mon, Jan 24, 2022 at 04:50:45PM -0600, Daniel D?az wrote:
> Hello!
>
> On 1/24/22 12:31, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.17 release.
> > There are 846 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.17-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Regressions detected on arm, arm64, i386, x86.
>
> This is one from arm64:
> /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
> 17 | if (in_bpf_jit(regs))
> | ^~~~~~~~~~
> cc1: some warnings being treated as errors
> make[3]: *** [/builds/linux/scripts/Makefile.build:277: arch/arm64/mm/extable.o] Error 1
>
> This is another one, in Perf (arm, arm64, i386, x86):
> libbpf.c: In function 'bpf_object__elf_collect':
> libbpf.c:3038:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
> 3038 | if (sh->sh_type != SHT_PROGBITS)
> | ^~
> libbpf.c:3042:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
> 3042 | if (sh->sh_type != SHT_PROGBITS)
> | ^~
> make[4]: *** [/builds/linux/tools/build/Makefile.build:97: /home/tuxbuild/.cache/tuxmake/builds/current/staticobjs/libbpf.o] Error 1
>
> Reported-by: Linux Kernel Functional Testing <[email protected]>
>
Thanks, should be fixed in -rc2.
greg k-h
On Tue, 25 Jan 2022, Naresh Kamboju wrote:
> On Tue, 25 Jan 2022 at 09:09, Daniel Díaz <[email protected]> wrote:
> >
> > Hello!
> >
> > On 1/24/22 16:50, Daniel Díaz wrote:
> > > Hello!
> > >
> > > On 1/24/22 12:31, Greg Kroah-Hartman wrote:
> > >> This is the start of the stable review cycle for the 5.15.17 release.
> > >> There are 846 patches in this series, all will be posted as a response
> > >> to this one. If anyone has any issues with these being applied, please
> > >> let me know.
> > >>
> > >> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> > >> Anything received after that time might be too late.
> > >>
> > >> The whole patch series can be found in one patch at:
> > >> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.17-rc1.gz
> > >> or in the git tree and branch at:
> > >> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> > >> and the diffstat can be found below.
> > >>
> > >> thanks,
> > >>
> > >> greg k-h
> > >
>
> Regressions detected on arm, arm64, i386, x86 on 5.15 and 5.10
>
> > >
> > > This is one from arm64:
> > > /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> > > /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
> > > 17 | if (in_bpf_jit(regs))
> > > | ^~~~~~~~~~
> > > cc1: some warnings being treated as errors
> > > make[3]: *** [/builds/linux/scripts/Makefile.build:277: arch/arm64/mm/extable.o] Error 1
> >
> > Bisection here pointed to "arm64/bpf: Remove 128MB limit for BPF JIT programs". Reverting made the build succeed.
>
> arm64/bpf: Remove 128MB limit for BPF JIT programs
> commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream.
>
> Reported-by: Linux Kernel Functional Testing <[email protected]>
>
Thanks for the report!
This one needs slightly different handling on 5.15. Russell had a 5.15
patch for this (where BPF exception handling was still handled separately)
and I've included it below. I verified it applies cleanly to the
linux-5.15.y branch and builds. I'd suggest either skipping backport of
this fix to stable completely, or just applying the below to 5.15 and
skipping further backports.
Thanks!
From dfe0e5d5c7101dd848822a7be8d0e63fa137919f Mon Sep 17 00:00:00 2001
From: Russell King <[email protected]>
Date: Fri, 29 Oct 2021 15:37:01 +0100
Subject: [PATCH] arm64/bpf: remove 128MB limit for BPF JIT programs
commit 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory")
...restricts BPF JIT program allocation to a 128MB region to ensure
BPF programs are still in branching range of each other. However
this restriction should not apply to the aarch64 JIT, since
BPF_JMP | BPF_CALL are implemented as a 64-bit move into a register
and then a BLR instruction - which has the effect of being able to call
anything without proximity limitation. Removing the contiguous JIT
region requires explicitly searching the bpf exception tables first
in fixup_exception(), since they are formatted differently from
the rest of the exception tables. Previously we used the fact that
the JIT memory was contiguous to identify the fact that the context
for the exception (the program counter) is a BPF program.
The approach used differs slightly from upstream since in 5.16 the
format of the exception tables was reorganized to accommodate BPF;
in upstream no explicit BPF exception handling was required.
The practical reason to relax this restriction on JIT memory is that 128MB
of JIT memory can be quickly exhausted, especially where PAGE_SIZE is 64KB -
one page is needed per program. In cases where seccomp filters are applied
to multiple VMs on VM launch - such filters are classic BPF but converted to
BPF - this can severely limit the number of VMs that can be launched. In a
world where we support BPF JIT always on, turning off the JIT isn't always
an option either.
Fixes: 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory")
Suggested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Tested-by: Alan Maguire <[email protected]>
Reviewed-by: Tom Saeger <[email protected]>
---
arch/arm64/include/asm/extable.h | 9 ---------
arch/arm64/include/asm/memory.h | 5 +----
arch/arm64/kernel/traps.c | 2 +-
arch/arm64/mm/extable.c | 13 +++++++++----
arch/arm64/mm/ptdump.c | 2 --
arch/arm64/net/bpf_jit_comp.c | 7 ++-----
6 files changed, 13 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/include/asm/extable.h b/arch/arm64/include/asm/extable.h
index b15eb4a..840a35e 100644
--- a/arch/arm64/include/asm/extable.h
+++ b/arch/arm64/include/asm/extable.h
@@ -22,15 +22,6 @@ struct exception_table_entry
#define ARCH_HAS_RELATIVE_EXTABLE
-static inline bool in_bpf_jit(struct pt_regs *regs)
-{
- if (!IS_ENABLED(CONFIG_BPF_JIT))
- return false;
-
- return regs->pc >= BPF_JIT_REGION_START &&
- regs->pc < BPF_JIT_REGION_END;
-}
-
#ifdef CONFIG_BPF_JIT
int arm64_bpf_fixup_exception(const struct exception_table_entry *ex,
struct pt_regs *regs);
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index f1745a8..0588632 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -44,11 +44,8 @@
#define _PAGE_OFFSET(va) (-(UL(1) << (va)))
#define PAGE_OFFSET (_PAGE_OFFSET(VA_BITS))
#define KIMAGE_VADDR (MODULES_END)
-#define BPF_JIT_REGION_START (_PAGE_END(VA_BITS_MIN))
-#define BPF_JIT_REGION_SIZE (SZ_128M)
-#define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE)
#define MODULES_END (MODULES_VADDR + MODULES_VSIZE)
-#define MODULES_VADDR (BPF_JIT_REGION_END)
+#define MODULES_VADDR (_PAGE_END(VA_BITS_MIN))
#define MODULES_VSIZE (SZ_128M)
#define VMEMMAP_START (-(UL(1) << (VA_BITS - VMEMMAP_SHIFT)))
#define VMEMMAP_END (VMEMMAP_START + VMEMMAP_SIZE)
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index b03e383..fe0cd05 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -988,7 +988,7 @@ static int bug_handler(struct pt_regs *regs, unsigned int esr)
static int reserved_fault_handler(struct pt_regs *regs, unsigned int esr)
{
pr_err("%s generated an invalid instruction at %pS!\n",
- in_bpf_jit(regs) ? "BPF JIT" : "Kernel text patching",
+ "Kernel text patching",
(void *)instruction_pointer(regs));
/* We cannot handle this */
diff --git a/arch/arm64/mm/extable.c b/arch/arm64/mm/extable.c
index aa00601..60a8b6a 100644
--- a/arch/arm64/mm/extable.c
+++ b/arch/arm64/mm/extable.c
@@ -9,14 +9,19 @@
int fixup_exception(struct pt_regs *regs)
{
const struct exception_table_entry *fixup;
+ unsigned long addr;
- fixup = search_exception_tables(instruction_pointer(regs));
- if (!fixup)
- return 0;
+ addr = instruction_pointer(regs);
- if (in_bpf_jit(regs))
+ /* Search the BPF tables first, these are formatted differently */
+ fixup = search_bpf_extables(addr);
+ if (fixup)
return arm64_bpf_fixup_exception(fixup, regs);
+ fixup = search_exception_tables(addr);
+ if (!fixup)
+ return 0;
+
regs->pc = (unsigned long)&fixup->fixup + fixup->fixup;
return 1;
}
diff --git a/arch/arm64/mm/ptdump.c b/arch/arm64/mm/ptdump.c
index 1c40353..9bc4066 100644
--- a/arch/arm64/mm/ptdump.c
+++ b/arch/arm64/mm/ptdump.c
@@ -41,8 +41,6 @@ enum address_markers_idx {
{ 0 /* KASAN_SHADOW_START */, "Kasan shadow start" },
{ KASAN_SHADOW_END, "Kasan shadow end" },
#endif
- { BPF_JIT_REGION_START, "BPF start" },
- { BPF_JIT_REGION_END, "BPF end" },
{ MODULES_VADDR, "Modules start" },
{ MODULES_END, "Modules end" },
{ VMALLOC_START, "vmalloc() area" },
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 803e777..465c44d 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1138,15 +1138,12 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
u64 bpf_jit_alloc_exec_limit(void)
{
- return BPF_JIT_REGION_SIZE;
+ return VMALLOC_END - VMALLOC_START;
}
void *bpf_jit_alloc_exec(unsigned long size)
{
- return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,
- BPF_JIT_REGION_END, GFP_KERNEL,
- PAGE_KERNEL, 0, NUMA_NO_NODE,
- __builtin_return_address(0));
+ return vmalloc(size);
}
void bpf_jit_free_exec(void *addr)
--
1.8.3.1
On Wed, 26 Jan 2022 at 21:05, Alan Maguire <[email protected]> wrote:
>
> > Regressions detected on arm, arm64, i386, x86 on 5.15 and 5.10
> >
> > > >
> > > > This is one from arm64:
> > > > /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> > > > /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
> > > > 17 | if (in_bpf_jit(regs))
> > > > | ^~~~~~~~~~
> > > > cc1: some warnings being treated as errors
> > > > make[3]: *** [/builds/linux/scripts/Makefile.build:277: arch/arm64/mm/extable.o] Error 1
> > >
> > > Bisection here pointed to "arm64/bpf: Remove 128MB limit for BPF JIT programs". Reverting made the build succeed.
> >
> > arm64/bpf: Remove 128MB limit for BPF JIT programs
> > commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream.
> >
> > Reported-by: Linux Kernel Functional Testing <[email protected]>
> >
>
> Thanks for the report!
>
> This one needs slightly different handling on 5.15. Russell had a 5.15
> patch for this (where BPF exception handling was still handled separately)
> and I've included it below. I verified it applies cleanly to the
> linux-5.15.y branch and builds. I'd suggest either skipping backport of
> this fix to stable completely, or just applying the below to 5.15 and
> skipping further backports.
Build test pass with this patch on stable/linux-5.15.y.
I have not run any tests.
- Naresh
On Thu, Jan 27, 2022 at 06:01:53PM +0530, Naresh Kamboju wrote:
> On Wed, 26 Jan 2022 at 21:05, Alan Maguire <[email protected]> wrote:
> >
> > > Regressions detected on arm, arm64, i386, x86 on 5.15 and 5.10
> > >
> > > > >
> > > > > This is one from arm64:
> > > > > /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> > > > > /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
> > > > > 17 | if (in_bpf_jit(regs))
> > > > > | ^~~~~~~~~~
> > > > > cc1: some warnings being treated as errors
> > > > > make[3]: *** [/builds/linux/scripts/Makefile.build:277: arch/arm64/mm/extable.o] Error 1
> > > >
> > > > Bisection here pointed to "arm64/bpf: Remove 128MB limit for BPF JIT programs". Reverting made the build succeed.
> > >
> > > arm64/bpf: Remove 128MB limit for BPF JIT programs
> > > commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream.
> > >
> > > Reported-by: Linux Kernel Functional Testing <[email protected]>
> > >
> >
> > Thanks for the report!
> >
> > This one needs slightly different handling on 5.15. Russell had a 5.15
> > patch for this (where BPF exception handling was still handled separately)
> > and I've included it below. I verified it applies cleanly to the
> > linux-5.15.y branch and builds. I'd suggest either skipping backport of
> > this fix to stable completely, or just applying the below to 5.15 and
> > skipping further backports.
>
> Build test pass with this patch on stable/linux-5.15.y.
Great, thanks!
I'll queue this up now.
greg k-h