2022-04-05 22:29:24

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0000/1017] 5.16.19-rc1 review

This is the start of the stable review cycle for the 5.16.19 release.
There are 1017 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.19-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>
Linux 5.16.19-rc1

Eric W. Biederman <[email protected]>
coredump: Use the vma snapshot in fill_files_note

Eric W. Biederman <[email protected]>
coredump/elf: Pass coredump_params into fill_note_info

Eric W. Biederman <[email protected]>
coredump: Remove the WARN_ON in dump_vma_snapshot

Eric W. Biederman <[email protected]>
coredump: Snapshot the vmas in do_coredump

Paolo Bonzini <[email protected]>
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address

Ulf Hansson <[email protected]>
mmc: rtsx: Fix build errors/warnings for unused variable

Kai-Heng Feng <[email protected]>
mmc: rtsx: Let MMC core handle runtime PM

Jens Axboe <[email protected]>
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"

Jackie Liu <[email protected]>
n64cart: convert bi_disk to bi_bdev->bd_disk fix build

Paul E. McKenney <[email protected]>
torture: Make torture.sh help message match reality

Martin Varghese <[email protected]>
openvswitch: Fixed nd target mask field in the flow dump.

Eli Cohen <[email protected]>
vdpa/mlx5: Avoid processing works if workqueue was destroyed

Maciej Fijalkowski <[email protected]>
ice: xsk: Fix indexing in ice_tx_xsk_pool()

Magnus Karlsson <[email protected]>
xsk: Do not write NULL in SW ring at allocation failure

Guilherme G. Piccoli <[email protected]>
docs: sysctl/kernel: add missing bit to panic_print

Anton Ivanov <[email protected]>
um: Fix uml_mconsole stop/go

Kuldeep Singh <[email protected]>
arm64: dts: ls1046a: Update i2c node dma properties

Kuldeep Singh <[email protected]>
arm64: dts: ls1043a: Update i2c dma properties

Kuldeep Singh <[email protected]>
ARM: dts: spear13xx: Update SPI dma properties

Kuldeep Singh <[email protected]>
ARM: dts: spear1340: Update serial node properties

Leilk Liu <[email protected]>
spi: mediatek: support tick_delay without enhance_timing

Guodong Liu <[email protected]>
pinctrl: canonical rsel resistance selection property

Janusz Krzysztofik <[email protected]>
media: ov6650: Fix crop rectangle affected by set format

Janusz Krzysztofik <[email protected]>
media: ov6650: Add try support to selection API operations

Ian Rogers <[email protected]>
perf vendor events: Update metrics for SkyLake Server

Amadeusz Sławiński <[email protected]>
ASoC: topology: Allow TLV control to be either read or write

Zheng Bin <[email protected]>
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV

Zhihao Cheng <[email protected]>
ubi: fastmap: Return error code if memory allocation fails in add_aeb()

Horatiu Vultur <[email protected]>
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Fix example

Yong Wu <[email protected]>
dt-bindings: memory: mtk-smi: Correct minItems to 2 for the gals clocks

Yong Wu <[email protected]>
dt-bindings: memory: mtk-smi: No need mediatek,larb-id for mt8167

Yong Wu <[email protected]>
dt-bindings: memory: mtk-smi: Rename clock to clocks

Martin Kepplinger <[email protected]>
media: dt-bindings: media: hynix,hi846: add link-frequencies description

Martin Kepplinger <[email protected]>
media: dt-binding: media: hynix,hi846: use $defs/port-base port description

Miquel Raynal <[email protected]>
dt-bindings: spi: mxic: The interrupt property is not mandatory

Miquel Raynal <[email protected]>
dt-bindings: mtd: nand-controller: Fix a comment in the examples

Miquel Raynal <[email protected]>
dt-bindings: mtd: nand-controller: Fix the reg property description

Kai-Heng Feng <[email protected]>
mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM

Zhang Wensheng <[email protected]>
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()

Hengqi Chen <[email protected]>
bpf: Fix comment for helper bpf_current_task_under_cgroup()

Namhyung Kim <[email protected]>
bpf: Adjust BPF stack helper functions to accommodate skip > 0

Toke Høiland-Jørgensen <[email protected]>
libbpf: Define BTF_KIND_* constants in btf.h to avoid compilation errors

Kuniyuki Iwashima <[email protected]>
af_unix: Support POLLPRI for OOB.

Randy Dunlap <[email protected]>
mm/usercopy: return 1 from hardened_usercopy __setup() handler

Randy Dunlap <[email protected]>
mm/memcontrol: return 1 from cgroup.memory __setup() handler

Randy Dunlap <[email protected]>
ARM: 9187/1: JIVE: fix return value of __setup handler

Randy Dunlap <[email protected]>
mm/mmap: return 1 from stack_guard_gap __setup() handler

Eric Dumazet <[email protected]>
net: preserve skb_end_offset() in skb_unclone_keeptruesize()

Eric Dumazet <[email protected]>
net: add skb_set_end_offset() helper

Steven Rostedt (Google) <[email protected]>
tracing: Have type enum modifications copy the strings

Linus Torvalds <[email protected]>
Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""

Jiasheng Jiang <[email protected]>
ASoC: soc-compress: Change the check for codec_dai

Will Deacon <[email protected]>
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition

Wan Jiabing <[email protected]>
docs: fix 'make htmldocs' warning in SCTP.rst

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix pinctrl-0 items to be size-1 items on ethernet

Saurav Kashyap <[email protected]>
scsi: qla2xxx: Add qla2x00_async_done() for async routines

Maxime Ripard <[email protected]>
drm/connector: Fix typo in documentation

Lv Ruyi <[email protected]>
proc: bootconfig: Add null pointer check

Oliver Hartkopp <[email protected]>
can: isotp: restore accidentally removed MSG_PEEK feature

Prashant Malani <[email protected]>
platform/chrome: cros_ec_typec: Check for EC device

Jon Hunter <[email protected]>
spi: Fix Tegra QSPI example

Anirudh Rayabharam <[email protected]>
vhost: handle error while adding split ranges to iotlb

Rafael J. Wysocki <[email protected]>
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data

Fangrui Song <[email protected]>
riscv module: remove (NOLOAD)

Pavel Begunkov <[email protected]>
io_uring: fix memory leak of uid in files registration

Stefano Garzarella <[email protected]>
virtio: use virtio_device_ready() in virtio_device_restore()

Jason Wang <[email protected]>
Revert "virtio_pci: harden MSI-X interrupts"

Jason Wang <[email protected]>
Revert "virtio-pci: harden INTX interrupts"

Christophe JAILLET <[email protected]>
block: Fix the maximum minor value is blk_alloc_ext_minor()

Arnd Bergmann <[email protected]>
ARM: iop32x: offset IRQ numbers by 1

Baokun Li <[email protected]>
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl

Jiaxin Yu <[email protected]>
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs

Meng Tang <[email protected]>
ASoC: rockchip: i2s_tdm: Fixup config for SND_SOC_DAIFMT_DSP_A/B

Jonathan Neuschäfer <[email protected]>
pinctrl: nuvoton: npcm7xx: Use %zu printk format for ARRAY_SIZE()

Jonathan Neuschäfer <[email protected]>
pinctrl: nuvoton: npcm7xx: Rename DS() macro to DSTR()

Randy Dunlap <[email protected]>
net: sparx5: uses, depends on BRIDGE or !BRIDGE

Miaoqian Lin <[email protected]>
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function

Chen-Yu Tsai <[email protected]>
pinctrl: pinconf-generic: Print arguments for bias-pull-*

Eric Dumazet <[email protected]>
watch_queue: Free the page array when watch_queue is dismantled

Herbert Xu <[email protected]>
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes

Robin Gong <[email protected]>
mailbox: imx: fix wakeup failure from freeze mode

David Howells <[email protected]>
rxrpc: Fix call timer start racing with call destruction

Xiaolong Huang <[email protected]>
rxrpc: fix some null-ptr-deref bugs in server_key.c

Guangbin Huang <[email protected]>
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware

Yufeng Mo <[email protected]>
net: hns3: fix the concurrency between functions reading debugfs

Andrew Price <[email protected]>
gfs2: Make sure FITRIM minlen is rounded up to fs block size

Andreas Gruenbacher <[email protected]>
gfs2: Fix gfs2_file_buffered_write endless loop workaround

Andreas Gruenbacher <[email protected]>
gfs2: gfs2_setattr_size error path fix

Carlos Llamas <[email protected]>
loop: fix ioctl calls using compat_loop_info

Tom Rix <[email protected]>
rtc: check if __rtc_read_time was successful

Masahiro Yamada <[email protected]>
modpost: restore the warning message for missing symbol versions

Matthew Wilcox (Oracle) <[email protected]>
XArray: Update the LRU list in xas_split()

Tom Rix <[email protected]>
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value

Pavel Skripkin <[email protected]>
can: mcba_usb: properly check endpoint type

Hangyu Hua <[email protected]>
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path

Matthew Wilcox (Oracle) <[email protected]>
XArray: Fix xas_create_range() when multi-order entry present

Jason A. Donenfeld <[email protected]>
wireguard: socket: ignore v6 endpoints when ipv6 is disabled

Wang Hai <[email protected]>
wireguard: socket: free skb in send6 when ipv6 is disabled

Jason A. Donenfeld <[email protected]>
wireguard: queueing: use CFI-safe ptr_ring cleanup function

Pankaj Raghav <[email protected]>
nvme: fix the read-only state for zoned namespaces with unsupposed features

Sungup Moon <[email protected]>
nvme: allow duplicate NSIDs for private namespaces

Baokun Li <[email protected]>
ubifs: rename_whiteout: correct old_dir size computing

Zhihao Cheng <[email protected]>
ubifs: Fix to add refcount once page is set private

Zhihao Cheng <[email protected]>
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()

Zhihao Cheng <[email protected]>
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned

Zhihao Cheng <[email protected]>
ubifs: Rectify space amount budget for mkdir/tmpfile operations

Zhihao Cheng <[email protected]>
ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work

Zhihao Cheng <[email protected]>
ubifs: Rename whiteout atomically

Zhihao Cheng <[email protected]>
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout

Zhihao Cheng <[email protected]>
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback

Zhihao Cheng <[email protected]>
ubifs: rename_whiteout: Fix double free for whiteout_ui->data

Yi Wang <[email protected]>
KVM: SVM: fix panic on out-of-bounds guest IRQ

Li RongQing <[email protected]>
KVM: x86: fix sending PV IPI

David Matlack <[email protected]>
KVM: Prevent module exit until all VMs are freed

Vitaly Kuznetsov <[email protected]>
KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated

Vitaly Kuznetsov <[email protected]>
KVM: x86: Avoid theoretical NULL pointer dereference in kvm_irq_delivery_to_apic_fast()

Vitaly Kuznetsov <[email protected]>
KVM: x86: Check lapic_in_kernel() before attempting to set a SynIC irq

Paul Cercueil <[email protected]>
MIPS: crypto: Fix CRC32 code

Gwendal Grignou <[email protected]>
platform: chrome: Split trace include file

Manish Rangankar <[email protected]>
scsi: qla2xxx: Use correct feature type field during RFF_ID processing

Quinn Tran <[email protected]>
scsi: qla2xxx: Reduce false trigger to login

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix stuck session of PRLI reject

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix N2N inconsistent PLOGI

Arun Easi <[email protected]>
scsi: qla2xxx: Fix crash during module load unload test

Arun Easi <[email protected]>
scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix laggy FC remote port session recovery

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix hang due to session stuck

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix incorrect reporting of task management failure

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix disk failure to rediscover

Saurav Kashyap <[email protected]>
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()

Joe Carnuccio <[email protected]>
scsi: qla2xxx: Check for firmware dump already collected

Joe Carnuccio <[email protected]>
scsi: qla2xxx: Add devids and conditionals for 28xx

Joe Carnuccio <[email protected]>
scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix clang warning

Arun Easi <[email protected]>
scsi: qla2xxx: Fix device reconnect in loop topology

Nilesh Javali <[email protected]>
scsi: qla2xxx: Fix warning for missing error code

Bikash Hazarika <[email protected]>
scsi: qla2xxx: Fix wrong FDMI data for 64G adapter

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix premature hw access after PCI error

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix scheduling while atomic

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix warning message due to adisc being flushed

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix stuck session in gpdb

Saurav Kashyap <[email protected]>
scsi: qla2xxx: Implement ref count for SRB

Daniel Wagner <[email protected]>
scsi: qla2xxx: Refactor asynchronous command initialization

Ville Syrjälä <[email protected]>
drm/i915: Reject unsupported TMDS rates on ICL+

Ville Syrjälä <[email protected]>
drm/i915: Fix PSF GV point mask when SAGV is not possible

Ville Syrjälä <[email protected]>
drm/i915: Treat SAGV block time 0 as SAGV disabled

Kees Cook <[email protected]>
drm/dp: Fix off-by-one in register cache size

Anders Roxell <[email protected]>
powerpc: Fix build errors with newer binutils

Christophe Leroy <[email protected]>
powerpc: Add set_memory_{p/np}() and remove set_memory_attr()

Anders Roxell <[email protected]>
powerpc/lib/sstep: Fix build errors with newer binutils

Anders Roxell <[email protected]>
powerpc/lib/sstep: Fix 'sthcx' instruction

Chen Jingwen <[email protected]>
powerpc/kasan: Fix early region not updated correctly

Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: HVCALL_SEND_IPI_EX is an XMM fast hypercall

Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Fix the maximum number of sparse banks for XMM fast TLB flush hypercalls

Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_flush_tlb()

Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_send_ipi()

Sean Christopherson <[email protected]>
KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU

Sean Christopherson <[email protected]>
KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU

Sean Christopherson <[email protected]>
KVM: x86/mmu: Move "invalid" check out of kvm_tdp_mmu_get_root()

Sean Christopherson <[email protected]>
KVM: x86/mmu: Use common TDP MMU zap helper for MMU notifier unmap hook

Paolo Bonzini <[email protected]>
KVM: x86: Reinitialize context if host userspace toggles EFER.LME

Matt Kramer <[email protected]>
ALSA: hda/realtek: Add alc256-samsung-headphone fixup

Mauro Carvalho Chehab <[email protected]>
media: atomisp: fix bad usage at error handling logic

Ulf Hansson <[email protected]>
mmc: host: Return an error when ->enable_sdio_irq() ops is missing

Steven Rostedt (Google) <[email protected]>
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: sof_es8336: log all quirks

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: sof_es8336: use NHLT information to set dmic and SSP

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: Revert "ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021"

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: soc-acpi: add more ACPI HIDs for ES83x6 devices

Anthony I Gilea <[email protected]>
ASoC: Intel: sof_sdw: fix quirks for 2022 HP Spectre x360 13"

Dongliang Mu <[email protected]>
media: hdpvr: initialize dev->worker at hdpvr_register_videodev

Pavel Skripkin <[email protected]>
media: Revert "media: em28xx: add missing em28xx_close_extension"

Hans de Goede <[email protected]>
media: i2c: ov5648: Fix lockdep error

Zheyu Ma <[email protected]>
video: fbdev: sm712fb: Fix crash in smtcfb_write()

Vijendar Mukunda <[email protected]>
ASoC: amd: vangogh: fix uninitialized symbol warning in machine driver

Vijendar Mukunda <[email protected]>
ASoC: amd: vg: fix for pm resume callback sequence

Uwe Kleine-König <[email protected]>
ARM: mmp: Fix failure to remove sram device

Richard Leitner <[email protected]>
ARM: tegra: tamonten: Fix I2C3 pad setting

Arnd Bergmann <[email protected]>
lib/test_lockup: fix kernel pointer check for separate address spaces

Arnd Bergmann <[email protected]>
uaccess: fix type mismatch warnings from access_ok()

Derek Fang <[email protected]>
ASoC: rt5682s: Fix the wrong jack type detected

Daniel González Cabanelas <[email protected]>
media: cx88-mpeg: clear interrupt status register before streaming video

Ming Qian <[email protected]>
media: imx-jpeg: fix a bug of accessing array out of bounds

Mauro Carvalho Chehab <[email protected]>
ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021

Shengjiu Wang <[email protected]>
ASoC: soc-core: skip zero num_dai component in searching dai name

Richard Schleich <[email protected]>
ARM: dts: bcm2711: Add the missing L1/L2 cache information

Jing Yao <[email protected]>
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit

Jing Yao <[email protected]>
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()

Jing Yao <[email protected]>
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()

Marcel Ziswiler <[email protected]>
arm64: defconfig: build imx-sdma as a module

Abel Vesa <[email protected]>
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk

Takashi Iwai <[email protected]>
ALSA: hda: Fix driver index handling at re-binding

Ard Biesheuvel <[email protected]>
ARM: ftrace: avoid redundant loads or clobbering IP

Tsuchiya Yuto <[email protected]>
media: atomisp: fix dummy_ptr check to avoid duplicate active_bo

Hans de Goede <[email protected]>
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards

Charles Keepax <[email protected]>
ASoC: madera: Add dependencies on MFD

Richard Schleich <[email protected]>
ARM: dts: bcm2837: Add the missing L1/L2 cache information

David Heidelberg <[email protected]>
ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960

Yang Guang <[email protected]>
video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit

George Kennedy <[email protected]>
video: fbdev: cirrusfb: check pixclock to avoid divide by zero

Evgeny Novikov <[email protected]>
video: fbdev: w100fb: Reset global state

Tim Gardner <[email protected]>
video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow

Yong Wu <[email protected]>
media: iommu/mediatek: Add device_link between the consumer and the larb devices

Yong Wu <[email protected]>
media: iommu/mediatek: Return ENODEV if the device is NULL

Yong Wu <[email protected]>
media: iommu/mediatek-v1: Free the existed fwspec if the master dev already has

Ranjani Sridharan <[email protected]>
ASoC: SOF: Intel: hda: Remove link assignment limitation

Mirela Rabulea <[email protected]>
media: imx-jpeg: Prevent decoding NV12M jpegs into single-planar buffers

Bard Liao <[email protected]>
ASoC: SOF: Intel: match sdw version on link_slaves_found

Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Report full jack status when plug is detected

Lad Prabhakar <[email protected]>
ASoC: sh: rz-ssi: Make the data structures available before registering the handlers

Peiwei Hu <[email protected]>
media: ir_toy: free before error exiting

Eugen Hristev <[email protected]>
media: atmel: atmel-isc-base: report frame sizes as full supported range

Hans Verkuil <[email protected]>
media: staging: media: zoran: fix various V4L2 compliance errors

Corentin Labbe <[email protected]>
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com

Corentin Labbe <[email protected]>
media: staging: media: zoran: move videodev alloc

Dongliang Mu <[email protected]>
ntfs: add sanity check on allocation size

Rohith Surabattula <[email protected]>
Adjust cifssb maximum read size

Chao Yu <[email protected]>
f2fs: compress: fix to print raw data size in error path of lz4 decompression

Jaegeuk Kim <[email protected]>
f2fs: use spin_lock to avoid hang

Josef Bacik <[email protected]>
btrfs: do not clean up repair bio if submit fails

Josef Bacik <[email protected]>
btrfs: do not double complete bio on errors during compressed reads

Josef Bacik <[email protected]>
btrfs: handle csum lookup errors properly on reads

Josef Bacik <[email protected]>
btrfs: make search_csum_tree return 0 if we get -EFBIG

Anand Jain <[email protected]>
btrfs: harden identification of a stale device

Jaegeuk Kim <[email protected]>
f2fs: don't get FREEZE lock in f2fs_evict_inode in frozen fs

Chuck Lever <[email protected]>
NFSD: Fix nfsd_breaker_owns_lease() return values

Chao Yu <[email protected]>
f2fs: fix to do sanity check on curseg->alloc_type

Theodore Ts'o <[email protected]>
ext4: don't BUG if someone dirty pages without asking ext4 first

Valentin Schneider <[email protected]>
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE

Valentin Schneider <[email protected]>
sched/tracing: Don't re-read p->state when emitting sched_switch event

Ritesh Harjani <[email protected]>
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit

Ritesh Harjani <[email protected]>
ext4: correct cluster len and clusters changed accounting in ext4_mb_mark_bb

Waiman Long <[email protected]>
locking/lockdep: Iterate lock_classes directly when reading lockdep files

Mark Rutland <[email protected]>
atomics: Fix atomic64_{read_acquire,set_release} fallbacks

Eddie James <[email protected]>
spi: fsi: Implement a timeout for polling status

Minghao Chi <[email protected]>
spi: tegra20: Use of_device_get_match_data()

Chris Leech <[email protected]>
nvme-tcp: lockdep: annotate in-kernel sockets

John David Anglin <[email protected]>
parisc: Fix handling off probe non-access faults

John David Anglin <[email protected]>
parisc: Fix non-access data TLB cache flush faults

Dmitry Baryshkov <[email protected]>
PM: core: keep irq flags in device_pm_check_callbacks()

Darren Hart <[email protected]>
ACPI/APEI: Limit printable size of BERT table data

Paolo Valente <[email protected]>
Revert "Revert "block, bfq: honor already-setup queue merges""

Paul Menzel <[email protected]>
lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3

Rafael J. Wysocki <[email protected]>
ACPICA: Avoid walking the ACPI Namespace if it is not there

Zhang Wensheng <[email protected]>
bfq: fix use-after-free in bfq_dispatch_request

Akira Kawata <[email protected]>
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files

Souptick Joarder (HPE) <[email protected]>
irqchip/nvic: Release nvic_base upon failure

Marc Zyngier <[email protected]>
irqchip/qcom-pdc: Fix broken locking

Casey Schaufler <[email protected]>
Fix incorrect type in assignment of ipv6 port for audit

Chaitanya Kulkarni <[email protected]>
loop: use sysfs_emit() in the sysfs xxx show()

Richard Haines <[email protected]>
selinux: allow FIOCLEX and FIONCLEX with policy capability

Fangrui Song <[email protected]>
arm64: module: remove (NOLOAD) from linker script

Daniel Lezcano <[email protected]>
powercap/dtpm_cpu: Reset per_cpu variable in the release function

Christian Göttsche <[email protected]>
selinux: use correct type for context length

Yu Kuai <[email protected]>
block, bfq: don't move oom_bfqq

Kai Ye <[email protected]>
crypto: hisilicon/sec - not need to enable sm4 extra mode at HW V3

Herbert Xu <[email protected]>
crypto: xts - Add softdep on ecb

Yahu Gao <[email protected]>
block/bfq_wf2q: correct weight to ioprio

Christoph Hellwig <[email protected]>
memstick/mspro_block: fix handling of read-only devices

Ming Lei <[email protected]>
block: throttle split bio in case of iops limit

Paul E. McKenney <[email protected]>
rcu: Mark writes to the rcu_segcblist structure's ->flags field

Marc Zyngier <[email protected]>
pinctrl: npcm: Fix broken references to chip->parent_device

David Woodhouse <[email protected]>
rcu: Kill rnp->ofl_seq and use only rcu_state.ofl_lock for exclusion

Kees Cook <[email protected]>
gcc-plugins/stackleak: Exactly match strings instead of prefixes

Kai Ye <[email protected]>
crypto: hisilicon/qm - cleanup warning in qm_vf_read_qos

Dave Stevenson <[email protected]>
regulator: rpi-panel: Handle I2C errors/timing to the Atmel

Casey Schaufler <[email protected]>
LSM: general protection fault in legacy_parse_param

Linus Torvalds <[email protected]>
fs: fix fd table size alignment properly

Dan Carpenter <[email protected]>
lib/test: use after free in register_test_dev_kmod()

Linus Torvalds <[email protected]>
fs: fd tables have to be multiples of BITS_PER_LONG

Xiaomeng Tong <[email protected]>
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator

Trond Myklebust <[email protected]>
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head

Marcelo Ricardo Leitner <[email protected]>
net/sched: act_ct: fix ref leak when switching zones

Florian Westphal <[email protected]>
net: prefer nf_ct_put instead of nf_conntrack_put

Jakub Kicinski <[email protected]>
selftests: tls: skip cmsg_to_pipe tests with TLS=n

Tom Rix <[email protected]>
octeontx2-af: initialize action variable

Zheng Yongjun <[email protected]>
net: sparx5: switchdev: fix possible NULL pointer dereference

Duoming Zhou <[email protected]>
net/x25: Fix null-ptr-deref caused by x25_disconnect

Tom Rix <[email protected]>
qlcnic: dcb: default to returning -EOPNOTSUPP

Randy Dunlap <[email protected]>
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL

Peng Li <[email protected]>
net: hns3: clean residual vf config after disable sriov

Trond Myklebust <[email protected]>
NFS: Don't loop forever in nfs_do_recoalesce()

Ido Schimmel <[email protected]>
selftests: test_vxlan_under_vrf: Fix broken test case

Florian Fainelli <[email protected]>
net: phy: broadcom: Fix brcm_fet_config_init()

Jian Shen <[email protected]>
net: hns3: refine the process when PF set VF VLAN

Yufeng Mo <[email protected]>
net: hns3: format the output of the MAC address

Jian Shen <[email protected]>
net: hns3: add vlan list lock to protect vlan list

Jian Shen <[email protected]>
net: hns3: fix port base vlan add fail when concurrent with reset

Jian Shen <[email protected]>
net: hns3: fix bug when PF set the duplicate MAC address for VFs

Vladimir Oltean <[email protected]>
net: enetc: report software timestamping via SO_TIMESTAMPING

Juergen Gross <[email protected]>
xen: fix is_xen_pmu()

Maxime Ripard <[email protected]>
clk: Initialize orphan req_rate

Stefano Garzarella <[email protected]>
vsock/virtio: enable VQs early on probe

Stefano Garzarella <[email protected]>
vsock/virtio: read the negotiated features before using VQs

Stefano Garzarella <[email protected]>
vsock/virtio: initialize vdev->priv before using VQs

Konrad Dybcio <[email protected]>
clk: qcom: gcc-msm8994: Fix gpll4 width

Thomas Richter <[email protected]>
perf stat: Fix forked applications enablement of counters

Daniel Thompson <[email protected]>
kdb: Fix the putarea helper function

Olga Kornievskaia <[email protected]>
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error

Olga Kornievskaia <[email protected]>
SUNRPC don't resend a task on an offlined transport

Pablo Neira Ayuso <[email protected]>
netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options

Phil Sutter <[email protected]>
netfilter: egress: Report interface as outgoing

Trond Myklebust <[email protected]>
SUNRPC: Don't call connect() more than once on a TCP socket

NeilBrown <[email protected]>
SUNRPC: improve 'swap' handling: scheduling and PF_MEMALLOC

NeilBrown <[email protected]>
SUNRPC/call_alloc: async tasks mustn't block waiting for memory

Pavel Skripkin <[email protected]>
jfs: fix divide error in dbNextAG

Randy Dunlap <[email protected]>
driver core: dd: fix return value of __setup handler

David Gow <[email protected]>
firmware: google: Properly state IOMEM dependency

Randy Dunlap <[email protected]>
kgdbts: fix return value of __setup handler

Xiaolong Huang <[email protected]>
virt: acrn: fix a memory leak in acrn_dev_ioctl()

Yonghua Huang <[email protected]>
virt: acrn: obtain pa from VMA with PFNMAP flag

Ilpo Järvinen <[email protected]>
serial: 8250: fix XOFF/XON sending when DMA is used

Randy Dunlap <[email protected]>
kgdboc: fix return value of __setup handler

Randy Dunlap <[email protected]>
tty: hvc: fix return value of __setup handler

Miaoqian Lin <[email protected]>
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe

Miaoqian Lin <[email protected]>
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe

Michael Walle <[email protected]>
pinctrl: microchip-sgpio: lock RMW access

Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs

Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix pingroup pin config state readback

Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()

Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback

Miaoqian Lin <[email protected]>
pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix GB-PC2 devicetree

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix pinctrl properties for ethernet

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix formatting

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree

Alexey Khoroshilov <[email protected]>
NFS: remove unneeded check in decode_devicenotify_args()

Robin Gong <[email protected]>
mailbox: imx: fix crash in resume on i.mx8ulp

Miaoqian Lin <[email protected]>
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver

Maxime Ripard <[email protected]>
clk: Fix clk_hw_get_clk() when dev is NULL

Jonathan Neuschäfer <[email protected]>
clk: clps711x: Terminate clk_div_table with sentinel element

Jonathan Neuschäfer <[email protected]>
clk: hisilicon: Terminate clk_div_table with sentinel element

Jonathan Neuschäfer <[email protected]>
clk: loongson1: Terminate clk_div_table with sentinel element

Jonathan Neuschäfer <[email protected]>
clk: actions: Terminate clk_div_table with sentinel element

Dan Williams <[email protected]>
nvdimm/region: Fix default alignment for small regions

Miaoqian Lin <[email protected]>
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region

Miaoqian Lin <[email protected]>
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region

Miaoqian Lin <[email protected]>
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region

Jie Hai <[email protected]>
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma

Taniya Das <[email protected]>
clk: qcom: clk-rcg2: Update the frac table for pixel clock

Taniya Das <[email protected]>
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG

Codrin Ciubotariu <[email protected]>
clk: at91: sama7g5: fix parents of PDMCs' GCLK

Dan Carpenter <[email protected]>
clk: imx: off by one in imx_lpcg_parse_clks_from_dt()

Abel Vesa <[email protected]>
clk: imx7d: Remove audio_mclk_root_clk

Randy Dunlap <[email protected]>
dma-debug: fix return value of __setup handlers

Martin Kaiser <[email protected]>
staging: r8188eu: fix endless loop in recv_func

Trond Myklebust <[email protected]>
NFS: Return valid errors from nfs2/3_decode_dirent()

Jiasheng Jiang <[email protected]>
habanalabs: Add check for pci_enable_device

Jiasheng Jiang <[email protected]>
iio: adc: Add check for devm_request_threaded_irq

Uwe Kleine-König <[email protected]>
serial: 8250: Fix race condition in RTS-after-send handling

Trond Myklebust <[email protected]>
NFS: Use of mapping_set_error() results in spurious errors

Andy Shevchenko <[email protected]>
serial: 8250_lpss: Balance reference count for PCI DMA device

Andy Shevchenko <[email protected]>
serial: 8250_mid: Balance reference count for PCI DMA device

Rafał Miłecki <[email protected]>
phy: phy-brcm-usb: fixup BCM4908 support

Liu Ying <[email protected]>
phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})

Dirk Buchwalder <[email protected]>
clk: qcom: ipq8074: Use floor ops for SDCC1 clock

Geert Uytterhoeven <[email protected]>
pinctrl: renesas: checker: Fix miscalculation of number of states

Geert Uytterhoeven <[email protected]>
pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel

Jonathan Cameron <[email protected]>
staging:iio:adc:ad7280a: Fix handing of device address bit reversing.

Zev Weiss <[email protected]>
serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type

Hangyu Hua <[email protected]>
staging: qlge: add unregister_netdev in qlge_probe

Hans de Goede <[email protected]>
iio: mma8452: Fix probe failing when an i2c_device_id is used

Dave Jiang <[email protected]>
dmaengine: idxd: restore traffic class defaults after wq reset

Dave Jiang <[email protected]>
dmaengine: idxd: change bandwidth token to read buffers

Robert Marko <[email protected]>
clk: qcom: ipq8074: fix PCI-E clock oops

Libin Yang <[email protected]>
soundwire: intel: fix wrong register name in intel_shim_wake

Luca Weiss <[email protected]>
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse

Christophe JAILLET <[email protected]>
misc: alcor_pci: Fix an error handling path

Christophe JAILLET <[email protected]>
fsi: Aspeed: Fix a potential double free

Robert Hancock <[email protected]>
pps: clients: gpio: Propagate return value from pps_gpio_probe

Uwe Kleine-König <[email protected]>
pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()

Joel Stanley <[email protected]>
fsi: scom: Remove retries in indirect scoms

Joel Stanley <[email protected]>
fsi: scom: Fix error handling

Jiri Slaby <[email protected]>
mxser: fix xmit_buf leak in activate when LSR == 0xff

Michael Straube <[email protected]>
staging: r8188eu: release_firmware is not called if allocation fails

Phillip Potter <[email protected]>
staging: r8188eu: convert DBG_88E_LEVEL call in hal/rtl8188e_hal_init.c

Lad Prabhakar <[email protected]>
clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3

Miaohe Lin <[email protected]>
kernel/resource: fix kfree() of bootmem memory again

Sondhauß, Jan <[email protected]>
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool

Alexander Lobakin <[email protected]>
ice: don't allow to run ice_send_event_to_aux() in atomic ctx

Alexander Lobakin <[email protected]>
ice: fix 'scheduling while atomic' on aux critical err interrupt

Miaoqian Lin <[email protected]>
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe

Hoang Le <[email protected]>
tipc: fix the timer expires after interval 100ms

Vladimir Oltean <[email protected]>
net: dsa: fix panic on shutdown if multi-chip tree failed to probe

Aaron Conole <[email protected]>
openvswitch: always update flow key after nat

Jakub Kicinski <[email protected]>
tcp: ensure PMTU updates are processed during fastopen

Jeremy Linton <[email protected]>
net: bcmgenet: Use stronger register read/writes to assure ordering

Bjorn Helgaas <[email protected]>
PCI: Avoid broken MSI on SB600 USB devices

Yafang Shao <[email protected]>
bpftool: Fix print error when show bpf map

Hangbin Liu <[email protected]>
selftests/bpf/test_lirc_mode2.sh: Exit with proper code

Michael Ellerman <[email protected]>
powerpc/pseries: Fix use after free in remove_phb_dynamic()

Peter Rosin <[email protected]>
i2c: mux: demux-pinctrl: do not deactivate a master that is not active

Phil Sutter <[email protected]>
netfilter: conntrack: Add and use nf_ct_set_auto_assign_helper_warned()

Lucas Tanure <[email protected]>
i2c: meson: Fix wrong speed use from probe

Petr Machata <[email protected]>
af_netlink: Fix shift out of bounds in group mask calculation

Yonglong Li <[email protected]>
mptcp: Fix crash due to tcp_tsorted_anchor was initialized before release skb

Guillaume Nault <[email protected]>
ipv4: Fix route lookups when handling ICMP redirects and PMTU updates

Dan Carpenter <[email protected]>
RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit()

Yake Yang <[email protected]>
Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt

Niels Dossche <[email protected]>
Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed

Pavel Skripkin <[email protected]>
Bluetooth: hci_uart: add missing NULL check in h5_enqueue

Jakub Sitnicki <[email protected]>
selftests/bpf: Fix error reporting from sock_fields programs

Kuniyuki Iwashima <[email protected]>
af_unix: Fix some data-races around unix_sk(sk)->oob_skb.

Sukadev Bhattiprolu <[email protected]>
ibmvnic: fix race between xmit and reset

Hangbin Liu <[email protected]>
bareudp: use ipv6_mod_enabled to check if IPv6 enabled

Oliver Hartkopp <[email protected]>
can: isotp: support MSG_TRUNC flag when reading from socket

Oliver Hartkopp <[email protected]>
can: isotp: return -EADDRNOTAVAIL when reading from unbound socket

Lorenzo Bianconi <[email protected]>
mt76: mt7921: fix mt7921_queues_acq implementation

Pablo Neira Ayuso <[email protected]>
netfilter: flowtable: Fix QinQ and pppoe support for inet table

José Roberto de Souza <[email protected]>
drm/i915/display: Do not re-enable PSR after it was marked as not reliable

José Roberto de Souza <[email protected]>
drm/i915/display: Fix HPD short pulse handling for eDP

Bob Pearson <[email protected]>
RDMA/rxe: Fix ref error in rxe_av.c

Chengguang Xu <[email protected]>
RDMA/rxe: Change variable and function argument to proper type

Dan Carpenter <[email protected]>
USB: storage: ums-realtek: fix error code in rts51x_read_mem()

Niklas Söderlund <[email protected]>
samples/bpf, xdpsock: Fix race when running for fix duration of time

Wang Yufen <[email protected]>
bpf, sockmap: Fix double uncharge the mem of sk_msg

Wang Yufen <[email protected]>
bpf, sockmap: Fix more uncharged while msg has more_data

Wang Yufen <[email protected]>
bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full

Wang Yufen <[email protected]>
bpf, sockmap: Fix memleak in sk_psock_queue_msg

Yongzhi Liu <[email protected]>
RDMA/mlx5: Fix memory leak in error flow for subscribe event routine

Leon Romanovsky <[email protected]>
Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error"

Dan Carpenter <[email protected]>
RDMA/irdma: Prevent some integer underflows

Linus Walleij <[email protected]>
power: ab8500_chargalg: Use CLOCK_MONOTONIC

Xin Xiong <[email protected]>
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init

Yaliang Wang <[email protected]>
MIPS: pgalloc: fix memory leak caused by pgd_free()

Randy Dunlap <[email protected]>
MIPS: RB532: fix return value of __setup handler

Miaoqian Lin <[email protected]>
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base

Miaoqian Lin <[email protected]>
ath10k: Fix error handling in ath10k_setup_msa_resources

Oliver Hartkopp <[email protected]>
vxcan: enable local echo for sent CAN frames

Johannes Berg <[email protected]>
iwlwifi: pcie: fix SW error MSI-X mapping

Max Filippov <[email protected]>
xtensa: add missing XCHAL_HAVE_WINDOWED check

Hangyu Hua <[email protected]>
powerpc: 8xx: fix a return value error in mpc8xx_pic_init

Sreekanth Reddy <[email protected]>
scsi: mpt3sas: Fix incorrect 4GB boundary check

Jia-Ju Bai <[email protected]>
platform/x86: huawei-wmi: check the return value of device_create_file()

Felix Maurer <[email protected]>
selftests/bpf: Make test_lwt_ip_encap more stable and faster

lic121 <[email protected]>
libbpf: Unmap rings when umem deleted

Jiasheng Jiang <[email protected]>
mfd: mc13xxx: Add check for mc13xxx_irq_request

Michael Ellerman <[email protected]>
powerpc/64s: Don't use DSISR for SLB faults

Jakob Koschel <[email protected]>
powerpc/sysdev: fix incorrect use to determine if list is empty

Maciej W. Rozycki <[email protected]>
MIPS: Sanitise Cavium switch cases in TLB handler synthesizers

Randy Dunlap <[email protected]>
mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n

Rob Clark <[email protected]>
drm/msm/a6xx: Fix missing ARRAY_SIZE() check

Robert Hancock <[email protected]>
net: axienet: fix RX ring refill allocation failure handling

Mark Tomlinson <[email protected]>
PCI: Reduce warnings on possible RW1C corruption

Yajun Deng <[email protected]>
RDMA/core: Fix ib_qp_usecnt_dec() called when error

Mike Marciniszyn <[email protected]>
IB/hfi1: Allow larger MTU without AIP

Jiasheng Jiang <[email protected]>
power: supply: wm8350-power: Add missing free in free_charger_irq

Jiasheng Jiang <[email protected]>
power: supply: wm8350-power: Handle error for wm8350_register_irq

Divya Koppera <[email protected]>
net: phy: micrel: Fix concurrent register access

Robert Hancock <[email protected]>
i2c: xiic: Make bus names unique

Mark Brown <[email protected]>
KVM: arm64: Enable Cortex-A510 erratum 2077057 by default

Anssi Hannula <[email protected]>
hv_balloon: rate-limit "Unhandled message" warning

Sean Christopherson <[email protected]>
KVM: SVM: Exit to userspace on ENOMEM/EFAULT GHCB errors

Hou Wenlong <[email protected]>
KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()

Zhenzhong Duan <[email protected]>
KVM: x86: Fix emulation in writing cr8

Michael Ellerman <[email protected]>
powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bit

Daniel Henrique Barboza <[email protected]>
powerpc/mm/numa: skip NUMA_NO_NODE onlining in parse_numa_properties()

Xu Kuohai <[email protected]>
libbpf: Skip forward declaration when counting duplicated type names

Christophe JAILLET <[email protected]>
gpu: host1x: Fix a memory leak in 'host1x_remove()'

Mustafa Ismail <[email protected]>
RDMA/irdma: Remove incorrect masking of PD

Mustafa Ismail <[email protected]>
RDMA/irdma: Fix Passthrough mode in VM

Mustafa Ismail <[email protected]>
RDMA/irdma: Fix netdev notifications for vlan's

Magnus Karlsson <[email protected]>
xsk: Fix race at socket teardown

Hou Tao <[email protected]>
bpf, arm64: Feed byte-offset into bpf line info

Hou Tao <[email protected]>
bpf, arm64: Call build_prologue() first in first JIT pass

Nishanth Menon <[email protected]>
drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt

Xiang Chen <[email protected]>
scsi: hisi_sas: Change permission of parameter prot_mask

Hans de Goede <[email protected]>
power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return

Miaoqian Lin <[email protected]>
drm/tegra: Fix reference leak in tegra_dsi_ganged_probe

Zhang Yi <[email protected]>
ext2: correct max file size computing

MeiChia Chiu <[email protected]>
mt76: mt7915: fix the muru tlv issue

Christophe JAILLET <[email protected]>
power: supply: sbs-charger: Don't cancel work that is not initialized

Randy Dunlap <[email protected]>
TOMOYO: fix __setup handlers return values

Maíra Canal <[email protected]>
drm/amd/display: Remove vupdate_int_entry definition

Aharon Landau <[email protected]>
RDMA/mlx5: Fix the flow of a miss in the allocation of a cache ODP MR

Luiz Angelo Daros de Luca <[email protected]>
net: dsa: realtek-smi: move to subdirectory

Luiz Angelo Daros de Luca <[email protected]>
net: dsa: realtek-smi: fix kdoc warnings

Deren Wu <[email protected]>
mt76: mt7921s: fix missing fc type/sub-type for 802.11 pkts

Damien Le Moal <[email protected]>
scsi: pm8001: Fix abort all task initialization

Damien Le Moal <[email protected]>
scsi: pm8001: Fix NCQ NON DATA command completion handling

Damien Le Moal <[email protected]>
scsi: pm8001: Fix NCQ NON DATA command task initialization

Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()

Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()

Damien Le Moal <[email protected]>
scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()

Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()

Damien Le Moal <[email protected]>
scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()

Damien Le Moal <[email protected]>
scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()

Damien Le Moal <[email protected]>
scsi: pm8001: Fix command initialization in pm80XX_send_read_log()

Bart Van Assche <[email protected]>
scsi: fnic: Fix a tracing statement

Abhishek Sahu <[email protected]>
vfio/pci: wake-up devices around reset functions

Abhishek Sahu <[email protected]>
vfio/pci: fix memory leak during D3hot to D0 transition

Aashish Sharma <[email protected]>
dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS

Rameshkumar Sundaram <[email protected]>
ath11k: Invalidate cached reo ring entry before accessing it

P Praneesh <[email protected]>
ath11k: avoid active pdev check for each msdu

Alexander Lobakin <[email protected]>
i40e: remove dead stores on XSK hotpath

Dmitry Baryshkov <[email protected]>
drm/msm/dpu: fix dp audio condition

Dmitry Baryshkov <[email protected]>
drm/msm/dpu: add DSPP blocks teardown

Dmitry Baryshkov <[email protected]>
drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode

Marijn Suijten <[email protected]>
drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent

Kuogee Hsieh <[email protected]>
drm/msm/dp: always add fail-safe mode into connector mode list

Kuogee Hsieh <[email protected]>
drm/msm/dp: stop link training after link training 2 failed

Kuogee Hsieh <[email protected]>
drm/msm/dp: populate connector of struct dp_panel

Amit Kumar Mahapatra <[email protected]>
mtd: rawnand: pl353: Set the nand chip node as the flash node

Dan Carpenter <[email protected]>
iwlwifi: mvm: Fix an error code in iwl_mvm_up()

Colin Ian King <[email protected]>
iwlwifi: Fix -EIO error code that is never returned

Mukesh Sisodiya <[email protected]>
iwlwifi: yoyo: Avoid using dram data if allocation failed

Rotem Saado <[email protected]>
iwlwifi: yoyo: remove DBGI_SRAM address reset writing

Johannes Berg <[email protected]>
iwlwifi: mvm: align locking in D3 test debugfs

Luca Coelho <[email protected]>
iwlwifi: mvm: don't iterate unadded vifs when handling FW SMPS req

Takashi Iwai <[email protected]>
iwlwifi: mvm: Don't call iwl_mvm_sta_from_mac80211() with NULL sta

Geliang Tang <[email protected]>
selftests: mptcp: add csum mib check for mptcp_connect

Tong Zhang <[email protected]>
dax: make sure inodes are flushed before destroy cache

Dan Williams <[email protected]>
cxl/port: Hold port reference until decoder release

Håkon Bugge <[email protected]>
IB/cma: Allow XRC INI QPs to set their local ACK timeout

Andrii Nakryiko <[email protected]>
libbpf: Fix memleak in libbpf_netlink_recv()

Roman Li <[email protected]>
drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug

Yiqing Yao <[email protected]>
drm/amd/pm: enable pm sysfs write for one VF mode

Yinjun Zhang <[email protected]>
bpftool: Fix the error when lookup in no-btf maps

Martin Povišer <[email protected]>
i2c: pasemi: Drop I2C classes from platform driver variant

Pin-Yen Lin <[email protected]>
drm/bridge: anx7625: Fix overflow issue on reading EDID

Jiasheng Jiang <[email protected]>
iommu/ipmmu-vmsa: Check for error num after setting mask

Dmitry Torokhov <[email protected]>
HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports

Miaoqian Lin <[email protected]>
power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init

Toke Høiland-Jørgensen <[email protected]>
libbpf: Use dynamically allocated buffer when receiving netlink messages

Neil Armstrong <[email protected]>
drm/bridge: dw-hdmi: use safe format when first in bridge chain

Andrii Nakryiko <[email protected]>
libbpf: Fix compilation warning due to mismatched printf format

Po Liu <[email protected]>
net:enetc: allocate CBD ring data memory using DMA coherent methods

Jonathan Cameron <[email protected]>
cxl/regs: Fix size of CXL Capability Header Register

Dan Williams <[email protected]>
tools/testing/cxl: Fix root port to host bridge assignment

Dan Williams <[email protected]>
cxl/core: Fix cxl_probe_component_regs() error message

Dan Carpenter <[email protected]>
libbpf: Fix signedness bug in btf_dump_array_data()

Xiao Yang <[email protected]>
RDMA/rxe: Check the last packet by RXE_END_MASK

Pali Rohár <[email protected]>
PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge

Pali Rohár <[email protected]>
PCI: aardvark: Fix reading MSI interrupt number

Corinna Vinschen <[email protected]>
igb: refactor XDP registration

Corinna Vinschen <[email protected]>
igc: avoid kernel warning when changing RX ring parameters

Naveen N. Rao <[email protected]>
selftests/bpf: Use "__se_" prefix on architectures without syscall wrapper

Kenta Tada <[email protected]>
selftests/bpf: Extract syscall wrapper

Mark Brown <[email protected]>
mtd: mchp48l640: Add SPI ID table

Mark Brown <[email protected]>
mtd: mchp23k256: Add SPI ID table

Christophe JAILLET <[email protected]>
i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()'

Lad Prabhakar <[email protected]>
i2c: bcm2835: Use platform_get_irq() to get the interrupt

Pavel Skripkin <[email protected]>
net: asix: add proper error handling of usb read errors

Christophe Leroy <[email protected]>
livepatch: Fix build failure on 32 bits processors

Thomas Bracht Laumann Jespersen <[email protected]>
scripts/dtc: Call pkg-config POSIXly correct

Johannes Berg <[email protected]>
mac80211: limit bandwidth in HE capabilities

Ilan Peer <[email protected]>
mac80211: Remove a couple of obsolete TODO

Yonghong Song <[email protected]>
bpf: Fix a btf decl_tag bug when tagging a function

Tobias Waldekranz <[email protected]>
net: dsa: mv88e6xxx: Enable port policy support on 6097

Miroslav Lichvar <[email protected]>
ptp: unregister virtual clocks when unregistering physical clock.

MeiChia Chiu <[email protected]>
mt76: mt7915: fix the nss setting in bitrates

Peter Chiu <[email protected]>
mt76: mt7915: fix mcs_map in mt7915_mcu_set_sta_he_mcs()

Lorenzo Bianconi <[email protected]>
mt76: mt7915: fix possible memory leak in mt7915_mcu_add_sta

Lorenzo Bianconi <[email protected]>
mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update

Lorenzo Bianconi <[email protected]>
mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update

Sean Wang <[email protected]>
mt76: mt7921e: fix possible probe failure after reboot

Leon Yen <[email protected]>
mt76: mt7921s: fix mt7921s_mcu_[fw|drv]_pmctrl

Peter Chiu <[email protected]>
mt76: mt7921: fix ht mcs in mt7921_mac_add_txs_skb()

Peter Chiu <[email protected]>
mt76: mt7915: fix ht mcs in mt7915_mac_add_txs_skb()

Lorenzo Bianconi <[email protected]>
mt76: mt7615: fix a leftover race in runtime-pm

Lorenzo Bianconi <[email protected]>
mt76: mt7921: fix a leftover race in runtime-pm

Lorenzo Bianconi <[email protected]>
mt76: mt7921: do not always disable fw runtime-pm

Sean Wang <[email protected]>
mt76: mt7921: set EDCA parameters with the MCU CE command

Sean Wang <[email protected]>
mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error

Lorenzo Bianconi <[email protected]>
mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv

Lorenzo Bianconi <[email protected]>
mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode

Lorenzo Bianconi <[email protected]>
mt76: connac: fix sta_rec_wtbl tag len

Athira Rajeev <[email protected]>
powerpc/perf: Don't use perf_hw_context for trace IMC PMU

Fabiano Rosas <[email protected]>
KVM: PPC: Book3S HV: Check return value of kvmppc_radix_init

Maxim Kiselev <[email protected]>
powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch

Jiasheng Jiang <[email protected]>
ray_cs: Check ioremap return value

Miaoqian Lin <[email protected]>
power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe

Alexander Lobakin <[email protected]>
ixgbe: respect metadata on XSK Rx to skb

Alexander Lobakin <[email protected]>
ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

Alexander Lobakin <[email protected]>
ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly

Alexander Lobakin <[email protected]>
igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

Alexander Lobakin <[email protected]>
ice: respect metadata on XSK Rx to skb

Alexander Lobakin <[email protected]>
ice: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

Alexander Lobakin <[email protected]>
i40e: respect metadata on XSK Rx to skb

Alexander Lobakin <[email protected]>
i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

Gerhard Engleder <[email protected]>
selftests/net: timestamping: Fix bind_phc check

Fabiano Rosas <[email protected]>
KVM: PPC: Fix vmx/vsx mixup in mmio emulation

Maor Gottlieb <[email protected]>
RDMA/core: Set MR type in ib_reg_user_mr

Wen Gong <[email protected]>
ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHz

Pavel Skripkin <[email protected]>
ath9k_htc: fix uninit value bugs

Hangbin Liu <[email protected]>
selftests/bpf/test_xdp_redirect_multi: use temp netns for testing

Robert Hancock <[email protected]>
net: phy: at803x: move page selection fix to config_init

Tom Rix <[email protected]>
drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function

Zhou Qingyang <[email protected]>
drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()

Zhou Qingyang <[email protected]>
drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()

Brett Creeley <[email protected]>
ionic: Correctly print AQ errors if completions aren't received

Shannon Nelson <[email protected]>
ionic: fix up printing of timeout error

Brett Creeley <[email protected]>
ionic: Don't send reset commands if FW isn't running

Shannon Nelson <[email protected]>
ionic: start watchdog after all is setup

Shannon Nelson <[email protected]>
ionic: fix type complaint in ionic_dev_cmd_clean()

Maxime Ripard <[email protected]>
drm/edid: Split deep color modes between RGB and YUV444

Maxime Ripard <[email protected]>
drm/edid: Don't clear formats if using deep color

Magnus Karlsson <[email protected]>
selftests, xsk: Fix rx_full stats test

Dario Binacchi <[email protected]>
mtd: rawnand: gpmi: fix controller timings setting

Jiasheng Jiang <[email protected]>
mtd: onenand: Check for error irq

Pavel Skripkin <[email protected]>
Bluetooth: hci_serdev: call init_rwsem() before p->open()

Tedd Ho-Jeong An <[email protected]>
Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products

Felix Maurer <[email protected]>
selftests: bpf: Fix bind on used port

Jani Nikula <[email protected]>
drm/locking: fix drm_modeset_acquire_ctx kernel-doc

José Expósito <[email protected]>
drm/selftests/test-drm_dp_mst_helper: Fix memory leak in sideband_msg_req_encode_decode

Kumar Kartikeya Dwivedi <[email protected]>
bpf: Fix UAF due to race between btf_try_get_module and load_module

Pavel Skripkin <[email protected]>
udmabuf: validate ubuf->pagecount

Wei Fu <[email protected]>
bpftool: Only set obj->skeleton on complete success

Yafang Shao <[email protected]>
libbpf: Fix possible NULL pointer dereference when destroying skeleton

Mauricio Vásquez <[email protected]>
bpftool: Fix error check when calling hashmap__new()

Jiasheng Jiang <[email protected]>
drm/panfrost: Check for error num after setting mask

Jiasheng Jiang <[email protected]>
drm/v3d/v3d_drv: Check for error num after setting mask

Wen Gong <[email protected]>
ath10k: fix memory overwrite of the WoWLAN wakeup packet pattern

Jagan Teki <[email protected]>
drm: bridge: adv7511: Fix ADV7535 HPD enablement

Miaoqian Lin <[email protected]>
drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probe

Miaoqian Lin <[email protected]>
drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probe

Miaoqian Lin <[email protected]>
drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev

Martin Blumenstingl <[email protected]>
drm/meson: Fix error handling when afbcd.ops->init fails

Neil Armstrong <[email protected]>
drm/meson: split out encoder from meson_dw_hdmi

Martin Blumenstingl <[email protected]>
drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops

Andre Przywara <[email protected]>
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx

Andre Przywara <[email protected]>
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS

Meng Tang <[email protected]>
ASoC: amd: Fix reference to PCM buffer address

Miaoqian Lin <[email protected]>
ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data

Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe

Miaoqian Lin <[email protected]>
ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe

zhangqilong <[email protected]>
ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume

Jiasheng Jiang <[email protected]>
mmc: davinci_mmc: Handle error for clk_enable

Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe

Kai Vehmanen <[email protected]>
ASoC: SOF: Intel: enable DMI L1 for playback streams

Wang Wensheng <[email protected]>
ASoC: imx-es8328: Fix error return code in imx_es8328_probe()

Shengjiu Wang <[email protected]>
ASoC: fsl_spdif: Disable TX clock when stop

Miaoqian Lin <[email protected]>
ASoC: mxs: Fix error handling in mxs_sgtl5000_probe

Codrin Ciubotariu <[email protected]>
ASoC: dmaengine: do not use a NULL prepare_slave_config() callback

Miaoqian Lin <[email protected]>
ASoC: rk817: Fix missing clk_disable_unprepare() in rk817_platform_probe

Miaoqian Lin <[email protected]>
ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe

Tzung-Bi Shih <[email protected]>
ASoC: mediatek: use of_device_get_match_data()

Miaoqian Lin <[email protected]>
ASoC: SOF: Add missing of_node_put() in imx8m_probe

Miaoqian Lin <[email protected]>
ASoC: rockchip: i2s: Fix missing clk_disable_unprepare() in rockchip_i2s_probe

Miaoqian Lin <[email protected]>
ASoC: atmel: Fix error handling in snd_proto_probe

Hans Verkuil <[email protected]>
ivtv: fix incorrect device_caps for ivtvfb

Jakob Koschel <[email protected]>
media: saa7134: fix incorrect use to determine if list is empty

Miaoqian Lin <[email protected]>
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of

Jiasheng Jiang <[email protected]>
ASoC: fsi: Add check for clk_enable

Jiasheng Jiang <[email protected]>
ASoC: wm8350: Handle error for wm8350_register_irq

Miaoqian Lin <[email protected]>
ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe

Lucas Tanure <[email protected]>
ASoC: cs35l41: Fix max number of TX channels

David Rhodes <[email protected]>
ASoC: cs35l41: Fix GPIO2 configuration

Jiasheng Jiang <[email protected]>
media: vidtv: Check for null return of vzalloc

Dafna Hirschfeld <[email protected]>
media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED

Randy Dunlap <[email protected]>
m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined

Rob Herring <[email protected]>
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly

Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction

Jia-Ju Bai <[email protected]>
memory: emif: check the pointer temp in get_device_details()

Jiasheng Jiang <[email protected]>
memory: emif: Add check for setup_interrupts

Jiasheng Jiang <[email protected]>
ASoC: soc-compress: prevent the potentially use of null pointer

Jiasheng Jiang <[email protected]>
ASoC: dwc-i2s: Handle errors for clk_enable

Jiasheng Jiang <[email protected]>
ASoC: atmel_ssc_dai: Handle errors for clk_enable

Jiasheng Jiang <[email protected]>
ASoC: mxs-saif: Handle errors for clk_enable

Randy Dunlap <[email protected]>
printk: fix return value of printk.devkmsg __setup handler

Frank Wunderlich <[email protected]>
arm64: dts: broadcom: Fix sata nodename

Kuldeep Singh <[email protected]>
arm64: dts: ns2: Fix spi-cpol and spi-cpha property

Jiasheng Jiang <[email protected]>
ALSA: spi: Add check for clk_enable()

Jiasheng Jiang <[email protected]>
ASoC: ti: davinci-i2s: Add check for clk_enable()

Aswath Govindraju <[email protected]>
mmc: sdhci_am654: Fix the driver data of AM64 SoC

Chun-Jie Chen <[email protected]>
soc: mediatek: pm-domains: Add wakeup capacity support in power domain

Jia-Ju Bai <[email protected]>
ASoC: acp: check the return value of devm_kzalloc() in acp_legacy_dai_links_create()

Jia-Ju Bai <[email protected]>
ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp()

Arnd Bergmann <[email protected]>
uaccess: fix nios2 and microblaze get_user_8()

Christophe Leroy <[email protected]>
vsprintf: Fix %pK with kptr_restrict == 0

Muhammad Usama Anjum <[email protected]>
selftests/lkdtm: Add UBSAN config

Mirela Rabulea <[email protected]>
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated

Nicolas Dufresne <[email protected]>
media: v4l2-core: Initialize h264 scaling matrix

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: fix return value of wcd934x_rx_hph_mode_put

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: fix kcontrol max values

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd938x: fix kcontrol max values

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wc938x: fix accessing array out of bounds for enum type

Srinivas Kandagatla <[email protected]>
ASoC: codecs: va-macro: fix accessing array out of bounds for enum type

Srinivas Kandagatla <[email protected]>
ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type

Srinivas Kandagatla <[email protected]>
ASoC: codecs: rx-macro: fix accessing compander for aux

Jernej Skrabec <[email protected]>
media: cedrus: h264: Fix neighbour info buffer size

Jernej Skrabec <[email protected]>
media: cedrus: H265: Fix neighbour info buffer size

Dan Carpenter <[email protected]>
media: usb: go7007: s2250-board: fix leak in probe()

Dongliang Mu <[email protected]>
media: em28xx: initialize refcount before kref_get

Zhou Qingyang <[email protected]>
media: ti-vpe: cal: Fix a NULL pointer dereference in cal_ctx_v4l2_init_formats()

Tom Rix <[email protected]>
media: video/hdmi: handle short reads of hdmi info frame.

Neil Armstrong <[email protected]>
media: mexon-ge2d: fixup frames size in registers

Marek Vasut <[email protected]>
ARM: dts: imx: Add missing LVDS decoder on M53Menlo

Andy Shevchenko <[email protected]>
vsprintf: Fix potential unaligned access

Ard Biesheuvel <[email protected]>
ARM: ftrace: ensure that ADR takes the Thumb bit into account

Olivier Moysan <[email protected]>
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15

Paul Kocialkowski <[email protected]>
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order

Stephan Gerhold <[email protected]>
cpuidle: qcom-spm: Check if any CPU is managed by SPM

Miaoqian Lin <[email protected]>
soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe

Christophe JAILLET <[email protected]>
firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not defined

Baruch Siach <[email protected]>
arm64: dts: qcom: ipq6018: fix usb reference period

Petr Vorel <[email protected]>
arm64: dts: qcom: msm8994: Provide missing "xo_board" and "sleep_clk" to GCC

Maulik Shah <[email protected]>
arm64: dts: qcom: sm8350: Correct TCS configuration for apps rsc

Maulik Shah <[email protected]>
arm64: dts: qcom: sm8150: Correct TCS configuration for apps rsc

Rafał Miłecki <[email protected]>
arm64: dts: broadcom: bcm4908: use proper TWD binding

Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: sm8250: fix PCIe bindings to follow schema

David Heidelberg <[email protected]>
arm64: dts: qcom: sdm845: fix microphone bias properties and values

Daniel Thompson <[email protected]>
soc: qcom: aoss: remove spurious IRQF_ONESHOT flags

Miaoqian Lin <[email protected]>
soc: qcom: aoss: Fix missing put_device call in qmp_get

Miaoqian Lin <[email protected]>
soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem

Jiasheng Jiang <[email protected]>
soc: qcom: rpmpd: Check for null return of devm_kcalloc

Pavel Kubelun <[email protected]>
ARM: dts: qcom: ipq4019: fix sleep clock

Marijn Suijten <[email protected]>
firmware: qcom: scm: Remove reassignment to desc following initializer

Douglas Anderson <[email protected]>
arm64: dts: qcom: sc7280: Fix gmu unit address

Randy Dunlap <[email protected]>
ASoC: max98927: add missing header file

Zev Weiss <[email protected]>
ARM: dts: Fix OpenBMC flash layout label addresses

Dan Carpenter <[email protected]>
video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()

Dan Carpenter <[email protected]>
video: fbdev: atmel_lcdfb: fix an error code in atmel_lcdfb_probe()

Wang Hai <[email protected]>
video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()

YueHaibing <[email protected]>
video: fbdev: controlfb: Fix COMPILE_TEST build

Z. Liu <[email protected]>
video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen

Jammy Huang <[email protected]>
media: aspeed: Correct value for h-total-pixels

Sakari Ailus <[email protected]>
media: ov5648: Don't pack controls struct

Sakari Ailus <[email protected]>
media: v4l: Avoid unaligned access warnings when printing 4cc modifiers

Janusz Krzysztofik <[email protected]>
media: ov6650: Fix set format try processing path

Chen-Yu Tsai <[email protected]>
media: hantro: Fix overfill bottom register field name

Jiasheng Jiang <[email protected]>
media: meson: vdec: potential dereference of null pointer

Miaoqian Lin <[email protected]>
media: coda: Fix missing put_device() call in coda_get_vdoa_data

Dmitry Osipenko <[email protected]>
memory: tegra20-emc: Correct memory device mask

Robert Hancock <[email protected]>
ASoC: simple-card-utils: Set sysclk on all components

Robert Hancock <[email protected]>
ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting

Jiasheng Jiang <[email protected]>
ASoC: codecs: Check for error pointer after calling devm_regmap_init_mmio

Lad Prabhakar <[email protected]>
ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively

Eugen Hristev <[email protected]>
media: atmel: atmel-sama7g5-isc: fix ispck leftover

Ondrej Zary <[email protected]>
media: bttv: fix WARNING regression on tunerless devices

Martin Kepplinger <[email protected]>
media: imx: imx8mq-mipi_csi2: fix system resume

Martin Kepplinger <[email protected]>
media: imx: imx8mq-mipi-csi2: remove wrong irq config write operation

Jiasheng Jiang <[email protected]>
media: mtk-vcodec: potential dereference of null pointer

Chen-Yu Tsai <[email protected]>
media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls

Laurent Pinchart <[email protected]>
media: staging: media: imx: imx7-mipi-csis: Make subdev name unique

Jonathan Marek <[email protected]>
media: camss: vfe-170: fix "VFE halt timeout" error

Jonathan Marek <[email protected]>
media: camss: csid-170: set the right HALT_CMD when disabled

Jonathan Marek <[email protected]>
media: camss: csid-170: don't enable unused irqs

Jonathan Marek <[email protected]>
media: camss: csid-170: fix non-10bit formats

Corentin Labbe <[email protected]>
media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size

Sam Protsenko <[email protected]>
pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios

Peng Liu <[email protected]>
kunit: make kunit_test_timeout compatible with comment

David Hildenbrand <[email protected]>
drivers/base/memory: add memory block to memory group after registration succeeded

Guillaume Tucker <[email protected]>
selftests, x86: fix how check_cc.sh is being invoked

Fengnan Chang <[email protected]>
f2fs: fix compressed file start atomic write may cause data corruption

Filipe Manana <[email protected]>
btrfs: fix unexpected error path when reflinking an inline extent

Chao Yu <[email protected]>
f2fs: fix to avoid potential deadlock

Valentin Schneider <[email protected]>
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race

Chengming Zhou <[email protected]>
sched/cpuacct: Fix charge percpu cpuusage

Amir Goldstein <[email protected]>
nfsd: more robust allocation failure handling in nfsd_file_cache_init

Jaegeuk Kim <[email protected]>
f2fs: fix missing free nid in f2fs_handle_failed_inode

Mel Gorman <[email protected]>
sched/fair: Improve consistency of allowed NUMA balance calculations

Adrian Hunter <[email protected]>
perf/x86/intel/pt: Fix address filter config for 32-bit kernel

Adrian Hunter <[email protected]>
perf/core: Fix address filter parser for multiple filters

Mathieu Desnoyers <[email protected]>
rseq: Remove broken uapi field layout on 32-bit little endian

Qais Yousef <[email protected]>
sched/uclamp: Fix iowait boost escaping uclamp restriction

Qais Yousef <[email protected]>
sched/core: Export pelt_thermal_tp

Bharata B Rao <[email protected]>
sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa

Chao Yu <[email protected]>
f2fs: fix to enable ATGC correctly via gc_idle sysfs interface

David Howells <[email protected]>
watch_queue: Actually free the watch

David Howells <[email protected]>
watch_queue: Fix NULL dereference in error cleanup

Jens Axboe <[email protected]>
io_uring: terminate manual loop iterator loop correctly for non-vecs

Jens Axboe <[email protected]>
io_uring: don't check unrelated req->open.how in accept request

Randy Dunlap <[email protected]>
clocksource: acpi_pm: fix return value of __setup handler

Brandon Wyman <[email protected]>
hwmon: (pmbus) Add Vin unit off handling

Miaoqian Lin <[email protected]>
hwrng: nomadik - Change clk_disable to clk_disable_unprepare

Jianglei Nie <[email protected]>
crypto: ccree - Fix use after free in cc_cipher_exit()

Dāvis Mosāns <[email protected]>
crypto: ccp - ccp_dmaengine_unregister release dma channels

Randy Dunlap <[email protected]>
ACPI: APEI: fix return value of __setup handlers

Dave Kleikamp <[email protected]>
KEYS: trusted: Avoid calling null function trusted_key_exit

Andreas Rammhold <[email protected]>
KEYS: trusted: Fix trusted key backends when building as module

Mark Rutland <[email protected]>
arm64: prevent instrumentation of bp hardening callbacks

Guillaume Ranquet <[email protected]>
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()

Claudiu Beznea <[email protected]>
clocksource/drivers/timer-microchip-pit64b: Use notrace

Krzysztof Kozlowski <[email protected]>
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts

Marek Szyprowski <[email protected]>
clocksource/drivers/exynos_mct: Refactor resources allocation

Drew Fustini <[email protected]>
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix

Petr Vorel <[email protected]>
crypto: vmx - add missing dependencies

Corentin Labbe <[email protected]>
crypto: gemini - call finalize with bh disabled

Corentin Labbe <[email protected]>
crypto: amlogic - call finalize with bh disabled

Corentin Labbe <[email protected]>
crypto: sun8i-ce - call finalize with bh disabled

Corentin Labbe <[email protected]>
crypto: sun8i-ss - call finalize with bh disabled

Claudiu Beznea <[email protected]>
hwrng: atmel - disable trng on failure path

Jiasheng Jiang <[email protected]>
spi: spi-zynqmp-gqspi: Handle error for dma_set_mask

Randy Dunlap <[email protected]>
PM: suspend: fix return value of __setup handler

Randy Dunlap <[email protected]>
PM: hibernate: fix __setup handler error handling

Eric Biggers <[email protected]>
block: don't delete queue kobject before its children

Christoph Hellwig <[email protected]>
nvme: fix the check for duplicate unique identifiers

Christoph Hellwig <[email protected]>
nvme: cleanup __nvme_check_ids

Armin Wolf <[email protected]>
hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING

Patrick Rudolph <[email protected]>
hwmon: (pmbus) Add mutex to regulator ops

Andy Shevchenko <[email protected]>
spi: pxa2xx-pci: Balance reference count for PCI DMA device

Kai Ye <[email protected]>
crypto: hisilicon/sec - fix the aead software fallback for engine

Gilad Ben-Yossef <[email protected]>
crypto: ccree - don't attempt 0 len DMA mappings

Randy Dunlap <[email protected]>
EVM: fix the evm= __setup handler return value

Richard Guy Briggs <[email protected]>
audit: log AUDIT_TIME_* records only from rules

Corentin Labbe <[email protected]>
crypto: rockchip - ECB does not need IV

Muhammad Usama Anjum <[email protected]>
selftests/sgx: Treat CC as one argument

Muhammad Usama Anjum <[email protected]>
selftests/x86: Add validity check and allow field splitting

Chengming Zhou <[email protected]>
blk-cgroup: set blkg iostat after percpu stat aggregation

Ondrej Mosnacek <[email protected]>
security: implement sctp_assoc_established hook in selinux

Ondrej Mosnacek <[email protected]>
security: add sctp_assoc_established hook

Jianyong Wu <[email protected]>
arm64/mm: avoid fixmap race condition when create pud mapping

Marco Elver <[email protected]>
stack: Constrain and fix stack offset randomization with Clang builds

Miaoqian Lin <[email protected]>
spi: tegra210-quad: Fix missin IRQ check in tegra_qspi_probe

Miaoqian Lin <[email protected]>
spi: tegra114: Add missing IRQ check in tegra_spi_probe

Shijith Thotton <[email protected]>
crypto: octeontx2 - remove CONFIG_DM_CRYPT check

Jiasheng Jiang <[email protected]>
thermal: int340x: Check for NULL after calling kmemdup()

Scott Mayhew <[email protected]>
selinux: Fix selinux_sb_mnt_opts_compat()

Tomas Paukrt <[email protected]>
crypto: mxs-dcp - Fix scatterlist processing

Herbert Xu <[email protected]>
crypto: authenc - Fix sleep in atomic context in decrypt_tail

Corentin Labbe <[email protected]>
crypto: sun8i-ss - really disable hash on A80

Geert Uytterhoeven <[email protected]>
hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDER

Sunil Goutham <[email protected]>
hwrng: cavium - Check health status while reading random data

Peter Gonda <[email protected]>
crypto: ccp - Ensure psp_ret is always init'd in __sev_platform_init_locked()

Christian Göttsche <[email protected]>
selinux: check return value of sel_make_avc_files

GONG, Ruiqi <[email protected]>
selinux: access superblock_security_struct in LSM blob way

kernel test robot <[email protected]>
regulator: qcom_smd: fix for_each_child.cocci warnings

Marc Zyngier <[email protected]>
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"

Liguang Zhang <[email protected]>
PCI: pciehp: Clear cmd_busy bit in polling mode

Fabio Estevam <[email protected]>
PCI: imx6: Allow to probe when dw_pcie_wait_for_link() fails

Mastan Katragadda <[email protected]>
drm/i915/gem: add missing boundary check in vm_access

Jani Nikula <[email protected]>
drm/i915/opregion: check port number bounds for SWSCI display power state

Hector Martin <[email protected]>
brcmfmac: pcie: Fix crashes due to early IRQs

Hector Martin <[email protected]>
brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio

Hector Martin <[email protected]>
brcmfmac: pcie: Declare missing firmware files in pcie.c

Hector Martin <[email protected]>
brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path

Hector Martin <[email protected]>
brcmfmac: firmware: Allocate space for default boardrev in nvram

Thomas Zimmermann <[email protected]>
drm/fb-helper: Mark screen buffers in system memory with FBINFO_VIRTFB

Lyude Paul <[email protected]>
drm/nouveau/backlight: Just set all backlight types as RAW

Lyude Paul <[email protected]>
drm/nouveau/backlight: Fix LVDS backlight detection on some laptops

Christian König <[email protected]>
drm/syncobj: flatten dma_fence_chains on transfer

Max Filippov <[email protected]>
xtensa: fix xtensa_wsr always writing 0

Max Filippov <[email protected]>
xtensa: fix stop_machine_cpuslocked call in patch_text

Max Filippov <[email protected]>
xtensa: define update_mmu_tlb function

Qu Wenruo <[email protected]>
btrfs: verify the tranisd of the to-be-written dirty extent buffer

Niels Dossche <[email protected]>
btrfs: extend locking to all space_info members accesses

Naohiro Aota <[email protected]>
btrfs: zoned: mark relocation as writing

Johan Hovold <[email protected]>
media: davinci: vpif: fix use-after-free on driver unbind

Johan Hovold <[email protected]>
media: davinci: vpif: fix unbalanced runtime PM enable

Johan Hovold <[email protected]>
media: davinci: vpif: fix unbalanced runtime PM get

Stanimir Varbanov <[email protected]>
media: venus: venc: Fix h264 8x8 transform control

Stanimir Varbanov <[email protected]>
media: venus: hfi_cmds: List HDR10 property as unsupported for v1 and v3

Ameer Hamza <[email protected]>
media: venus: vdec: fixed possible memory leak issue

Kees Cook <[email protected]>
media: omap3isp: Use struct_group() for memcpy() region

Sean Young <[email protected]>
media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PC

Maciej W. Rozycki <[email protected]>
DEC: Limit PMAX memory probing to R3k systems

Shawn Guo <[email protected]>
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()

Mingzhe Zou <[email protected]>
bcache: fixup multiple threads crash

Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - fix buffer overread in pkcs1pad_verify_complete()

Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - restore signature length check

Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - correctly get hash from source scatterlist

Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - only allow with rsa

Kees Cook <[email protected]>
exec: Force single empty string when argv is empty

Dirk Müller <[email protected]>
lib/raid6/test: fix multiple definition linking error

Srinivas Pandruvada <[email protected]>
thermal: int340x: Increase bitmap size

Jann Horn <[email protected]>
pstore: Don't use semaphores in always-atomic-context code

Colin Ian King <[email protected]>
carl9170: fix missing bit-wise or operator for tx_params

Jocelyn Falempe <[email protected]>
mgag200 fix memmapsl configuration in GCTL6 register

Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add missing HDMI supplies on SMDK5420

Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add missing HDMI supplies on SMDK5250

Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: fix UART3 pins configuration in Exynos5250

Tudor Ambarus <[email protected]>
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size

Tudor Ambarus <[email protected]>
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes

Johannes Berg <[email protected]>
rfkill: make new event layout opt-in

Michael Schmitz <[email protected]>
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix

Helge Deller <[email protected]>
video: fbdev: sm712fb: Fix crash in smtcfb_read()

Thomas Zimmermann <[email protected]>
fbdev: Hot-unplug firmware fb devices on forced removal

Cooper Chiou <[email protected]>
drm/edid: check basic audio support on CEA extension block

Tejun Heo <[email protected]>
block: don't merge across cgroup boundaries if blkcg is enabled

Shin'ichiro Kawasaki <[email protected]>
block: limit request dispatch loop duration

Tejun Heo <[email protected]>
block: fix rq-qos breakage from skipping rq_qos_done_bio()

Nikolay Borisov <[email protected]>
btrfs: zoned: put block group after final usage

Pekka Pessi <[email protected]>
mailbox: tegra-hsp: Flush whole channel

Christian Brauner <[email protected]>
landlock: Use square brackets around "landlock-ruleset"

Tom Rix <[email protected]>
samples/landlock: Fix path_list memory leak

Ojaswin Mujoo <[email protected]>
ext4: make mb_optimize_scan performance mount option work with extents

Ye Bin <[email protected]>
ext4: fix fs corruption when tring to remove a non-empty directory with IO error

Ritesh Harjani <[email protected]>
ext4: fix ext4_fc_stats trace point

Jann Horn <[email protected]>
coredump: Also dump first pages of non-executable ELF libraries

Sakari Ailus <[email protected]>
ACPI: properties: Consistently return -ENOENT if there are no more references

Rafael J. Wysocki <[email protected]>
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"

Sergey Shtylyov <[email protected]>
mmc: core: use sysfs_emit() instead of sprintf()

Ammar Faizi <[email protected]>
ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM

Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am64: Fix gic-v3 compatible regs

Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs

Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs

Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs

Manivannan Sadhasivam <[email protected]>
arm64: dts: qcom: sm8250: Fix MSI IRQ for PCIe1 and PCIe2

Vijay Balakrishna <[email protected]>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones

David Engraf <[email protected]>
arm64: signal: nofpsimd: Do not allocate fp/simd context when not available

Ben Dooks <[email protected]>
PCI: fu740: Force 2.5GT/s for initial device probe

Oliver Hartkopp <[email protected]>
can: isotp: sanitize CAN ID checks in isotp_bind()

Lars Ellenberg <[email protected]>
drbd: fix potential silent data corruption

Steven Rostedt (Google) <[email protected]>
tracing: Have trace event string test handle zero length strings

Mikulas Patocka <[email protected]>
dm integrity: set journal entry unused when shrinking device

Mike Snitzer <[email protected]>
dm: fix double accounting of flush with data

Mike Snitzer <[email protected]>
dm: interlock pending dm_io and dm_wait_for_bios_completion

Kirill Tkhai <[email protected]>
dm: fix use-after-free in dm_cleanup_zoned_dev()

Mike Snitzer <[email protected]>
dm stats: fix too short end duration_ns when using precise_timestamps

Kuan-Ying Lee <[email protected]>
mm/kmemleak: reset tag when compare object pointer

Rik van Riel <[email protected]>
mm,hwpoison: unmap poisoned page before invalidation

Charan Teja Kalla <[email protected]>
Revert "mm: madvise: skip unmapped vma holes passed to process_madvise"

Charan Teja Kalla <[email protected]>
mm: madvise: return correct bytes advised with process_madvise

Charan Teja Kalla <[email protected]>
mm: madvise: skip unmapped vma holes passed to process_madvise

Hans de Goede <[email protected]>
drm/simpledrm: Add "panel orientation" property on non-upright mounted LCD panels

Joseph Qi <[email protected]>
ocfs2: fix crash when mount with quota enabled

Jens Axboe <[email protected]>
io_uring: ensure that fsnotify is always called

Ali Pouladi <[email protected]>
rtc: pl031: fix rtc features null pointer dereference

Mateusz Jończyk <[email protected]>
rtc: mc146818-lib: fix locking in mc146818_set_time

Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020

Takashi Iwai <[email protected]>
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock

Mohan Kumar <[email protected]>
ALSA: hda: Avoid unsol event during RPM suspending

Xiaomeng Tong <[email protected]>
ALSA: cs4236: fix an incorrect NULL check on list iterator

Paulo Alcantara <[email protected]>
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()

Paulo Alcantara <[email protected]>
cifs: prevent bad output lengths in smb2_ioctl_query_info()

Paulo Alcantara <[email protected]>
cifs: do not skip link targets when an I/O fails

José Expósito <[email protected]>
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"

Dmitry Vyukov <[email protected]>
riscv: Increase stack size under KASAN

Nikita Shubin <[email protected]>
riscv: Fix fill_callchain return value

Niklas Cassel <[email protected]>
riscv: dts: canaan: Fix SPI3 bus width

Manish Chopra <[email protected]>
qed: validate and restrict untrusted VFs vlan promisc mode

Manish Chopra <[email protected]>
qed: display VF trust config

Damien Le Moal <[email protected]>
scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands

James Smart <[email protected]>
scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters

Adrian Hunter <[email protected]>
scsi: ufs: Fix runtime PM messages never-ending cycle

Adrian Hunter <[email protected]>
scsi: core: sd: Add silence_suspend flag to suppress some PM messages

Hugh Dickins <[email protected]>
mempolicy: mbind_range() set_policy() after vma_merge()

Rik van Riel <[email protected]>
mm: invalidate hwpoison page cache page in fault path

Alistair Popple <[email protected]>
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node

Peter Xu <[email protected]>
mm: don't skip swap entry even if zap_details specified

Minchan Kim <[email protected]>
mm: fs: fix lru_cache_disabled race in bh_lru

Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_scan_medium

Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_do_mount_fs

Baokun Li <[email protected]>
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem

Hangyu Hua <[email protected]>
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path

Marc Kleine-Budde <[email protected]>
can: m_can: m_can_tx_handler(): fix use after free of skb

Hangyu Hua <[email protected]>
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path

Sean Nyekjaer <[email protected]>
mtd: rawnand: protect access to rawnand devices while in suspend

Miquel Raynal <[email protected]>
spi: mxic: Fix the transmit path

Damien Le Moal <[email protected]>
net: bnxt_ptp: fix compilation error

Krzysztof Kozlowski <[email protected]>
pinctrl: samsung: drop pin banks references on error paths

Aidan MacDonald <[email protected]>
pinctrl: ingenic: Fix regmap on X series SoCs

Miaohe Lin <[email protected]>
mm/mlock: fix two bugs in user_shm_lock()

Alistair Delva <[email protected]>
remoteproc: Fix count check in rproc_coredump_write()

Chao Yu <[email protected]>
f2fs: fix to do sanity check on .cp_pack_total_block_count

Juhyung Park <[email protected]>
f2fs: quota: fix loop condition at f2fs_quota_sync()

Chao Yu <[email protected]>
f2fs: fix to unlock page correctly in error path of is_alive()

Dan Carpenter <[email protected]>
NFSD: prevent integer overflow on 32 bit systems

Dan Carpenter <[email protected]>
NFSD: prevent underflow in nfssvc_decode_writeargs()

Trond Myklebust <[email protected]>
NFS: NFSv2/v3 clients should never be setting NFS_CAP_XATTR

Trond Myklebust <[email protected]>
SUNRPC: Do not dereference non-socket transports in sysfs

NeilBrown <[email protected]>
SUNRPC: avoid race between mod_timer() and del_timer_sync()

Gwendal Grignou <[email protected]>
HID: intel-ish-hid: Use dma_alloc_coherent for firmware update

Johan Hovold <[email protected]>
firmware: sysfb: fix platform-device leak in error path

Ang Tien Sung <[email protected]>
firmware: stratix10-svc: add missing callback parameter on RSU

Bagas Sanjaya <[email protected]>
Documentation: update stable tree link

Bagas Sanjaya <[email protected]>
Documentation: add link to stable release candidate tree

Eric Biggers <[email protected]>
KEYS: asymmetric: properly validate hash_algo and encoding

Eric Biggers <[email protected]>
KEYS: asymmetric: enforce that sig algo matches key algo

Eric Biggers <[email protected]>
KEYS: fix length validation in keyctl_pkey_params_get_2()

Ronnie Sahlberg <[email protected]>
cifs: we do not need a spinlock around the tree access during umount

Ronnie Sahlberg <[email protected]>
cifs: fix handlecache and multiuser

Jann Horn <[email protected]>
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE

Kunihiko Hayashi <[email protected]>
clk: uniphier: Fix fixed-rate initialization

Quentin Schulz <[email protected]>
clk: rockchip: re-add rational best approximation algorithm to the fractional divider

Dan Carpenter <[email protected]>
greybus: svc: fix an error handling bug in gb_svc_hello()

Liam Beguin <[email protected]>
iio: inkern: make a best effort on offset calculation

Liam Beguin <[email protected]>
iio: inkern: apply consumer scale when no channel scale is available

Liam Beguin <[email protected]>
iio: inkern: apply consumer scale on IIO_VAL_INT cases

Liam Beguin <[email protected]>
iio: afe: rescale: use s64 for temporary scale calculations

Billy Tsai <[email protected]>
iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.

Miaoqian Lin <[email protected]>
coresight: syscfg: Fix memleak on registration failure in cscfg_create_device

James Clark <[email protected]>
coresight: Fix TRCCONFIGR.QE sysfs interface

Akira Yokosawa <[email protected]>
docs: sphinx/requirements: Limit jinja2<3.1

Paul Davey <[email protected]>
bus: mhi: Fix MHI DMA structure endianness

Yonglin Tan <[email protected]>
bus: mhi: pci_generic: Add mru_default for Quectel EM1xx series

Alexander Usyskin <[email protected]>
mei: avoid iterator usage outside of list_for_each_entry

Alexander Usyskin <[email protected]>
mei: me: add Alder Lake N device id.

Alexander Usyskin <[email protected]>
mei: me: disable driver on the ign firmware

Anssi Hannula <[email protected]>
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()

Mathias Nyman <[email protected]>
xhci: make xhci_handshake timeout for xhci_reset() adjustable

Henry Lin <[email protected]>
xhci: fix runtime PM imbalance in USB2 resume

Anssi Hannula <[email protected]>
xhci: fix garbage USBSTS being logged in some cases

Alan Stern <[email protected]>
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c

Sven Peter <[email protected]>
usb: typec: tipd: Forward plug orientation to typec subsystem

Jens Axboe <[email protected]>
block: flush plug based on hardware and software queue order

Jens Axboe <[email protected]>
block: ensure plug merging checks the correct queue at least once

Lino Sanfilippo <[email protected]>
tpm: fix reference counting for struct tpm_chip

Robin Murphy <[email protected]>
iommu/iova: Improve 32-bit free space estimate

Alex Deucher <[email protected]>
drm/amdgpu: only check for _PR3 on dGPUs

Alex Deucher <[email protected]>
drm/amdgpu: move PX checking into amdgpu_device_ip_early_init

Waiman Long <[email protected]>
locking/lockdep: Avoid potential access of invalid memory in lock_class

Yosry Ahmed <[email protected]>
selftests: vm: fix clang build error multiple output files

David Jeffery <[email protected]>
scsi: fnic: Finish scsi_cmnd before dropping the spinlock

Claudiu Beznea <[email protected]>
net: dsa: microchip: add spi_device_id tables

Haimin Zhang <[email protected]>
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register

Linus Walleij <[email protected]>
Input: zinitix - do not report shadow fingers

Biju Das <[email protected]>
spi: Fix erroneous sgs value with min_t()

Bartosz Golaszewski <[email protected]>
Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"

Minghao Chi (CGEL ZTE) <[email protected]>
net:mcf8390: Use platform_get_irq() to get the interrupt

Biju Das <[email protected]>
spi: Fix invalid sgs value

Marcelo Roberto Jimenez <[email protected]>
gpio: Revert regression in sysfs-gpio (gpiolib.c)

Zheyu Ma <[email protected]>
ethernet: sun: Free the coherent when failing in probing

Stefano Garzarella <[email protected]>
tools/virtio: fix virtio_test execution

Si-Wei Liu <[email protected]>
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ

Michael S. Tsirkin <[email protected]>
virtio_console: break out of buf poll on remove

Daniel Palmer <[email protected]>
ARM: mstar: Select HAVE_ARM_ARCH_TIMER

Lina Wang <[email protected]>
xfrm: fix tunnel model fragmentation behavior

Michael Hübner <[email protected]>
HID: Add support for open wheel and no attachment to T300

Lucas Zampieri <[email protected]>
HID: logitech-dj: add new lightspeed receiver id

Muchun Song <[email protected]>
mm: kfence: fix missing objcg housekeeping for SLAB

Johan Hovold <[email protected]>
USB: serial: simple: add Nokia phone driver

Johan Hovold <[email protected]>
USB: serial: pl2303: fix GS type detection

Krzysztof Kozlowski <[email protected]>
dt-bindings: usb: hcd: correct usb-device path

Eddie James <[email protected]>
USB: serial: pl2303: add IBM device IDs

Linus Torvalds <[email protected]>
Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""


-------------

Diffstat:

Documentation/ABI/testing/sysfs-fs-f2fs | 1 +
Documentation/admin-guide/kernel-parameters.txt | 3 +-
Documentation/admin-guide/sysctl/kernel.rst | 1 +
.../devicetree/bindings/media/i2c/hynix,hi846.yaml | 6 +-
.../memory-controllers/mediatek,smi-common.yaml | 28 +-
.../memory-controllers/mediatek,smi-larb.yaml | 16 +-
.../devicetree/bindings/mtd/nand-controller.yaml | 4 +-
.../bindings/pinctrl/microchip,sparx5-sgpio.yaml | 2 +-
.../bindings/spi/nvidia,tegra210-quad.yaml | 2 +-
Documentation/devicetree/bindings/spi/spi-mxic.txt | 4 +-
Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 +-
Documentation/process/stable-kernel-rules.rst | 11 +-
Documentation/security/SCTP.rst | 26 +-
Documentation/sound/hd-audio/models.rst | 4 +
Documentation/sphinx/requirements.txt | 2 +
MAINTAINERS | 3 +-
Makefile | 4 +-
arch/Kconfig | 1 +
arch/arc/kernel/process.c | 2 +-
arch/arm/boot/dts/bcm2711.dtsi | 50 +++
arch/arm/boot/dts/bcm2837.dtsi | 49 +++
arch/arm/boot/dts/dra7-l4.dtsi | 5 +-
arch/arm/boot/dts/dra7.dtsi | 8 +-
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +
arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +
arch/arm/boot/dts/imx53-m53menlo.dts | 29 +-
arch/arm/boot/dts/imx7-colibri.dtsi | 4 +-
arch/arm/boot/dts/imx7-mba7.dtsi | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 4 +-
arch/arm/boot/dts/imx7d-pico-pi.dts | 4 +-
arch/arm/boot/dts/imx7d-sdb.dts | 4 +-
arch/arm/boot/dts/imx7s-warp.dts | 4 +-
arch/arm/boot/dts/openbmc-flash-layout-64.dtsi | 2 +-
arch/arm/boot/dts/openbmc-flash-layout.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 3 +-
arch/arm/boot/dts/qcom-msm8960.dtsi | 8 +-
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
arch/arm/boot/dts/sama7g5.dtsi | 6 -
arch/arm/boot/dts/spear1340.dtsi | 6 +-
arch/arm/boot/dts/spear13xx.dtsi | 6 +-
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 22 +-
arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +-
arch/arm/configs/multi_v5_defconfig | 2 +
arch/arm/crypto/Kconfig | 2 +
arch/arm/kernel/entry-ftrace.S | 53 +--
arch/arm/kernel/swp_emulate.c | 2 +-
arch/arm/kernel/traps.c | 2 +-
arch/arm/mach-iop32x/include/mach/entry-macro.S | 2 +-
arch/arm/mach-iop32x/include/mach/irqs.h | 2 +-
arch/arm/mach-iop32x/irq.c | 6 +-
arch/arm/mach-iop32x/irqs.h | 60 +--
arch/arm/mach-mmp/sram.c | 22 +-
arch/arm/mach-mstar/Kconfig | 1 +
arch/arm/mach-s3c/mach-jive.c | 6 +-
arch/arm64/Kconfig | 1 +
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 +-
.../arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 8 +-
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 +-
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8994.dtsi | 3 +
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 16 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 4 +-
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-am64.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-am65.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
arch/arm64/configs/defconfig | 2 +-
arch/arm64/include/asm/module.lds.h | 6 +-
arch/arm64/include/asm/spectre.h | 3 +-
arch/arm64/kernel/proton-pack.c | 9 +-
arch/arm64/kernel/signal.c | 10 +-
arch/arm64/mm/init.c | 36 +-
arch/arm64/mm/mmu.c | 41 +-
arch/arm64/net/bpf_jit_comp.c | 18 +-
arch/csky/kernel/perf_callchain.c | 2 +-
arch/csky/kernel/signal.c | 2 +-
arch/m68k/coldfire/device.c | 6 +-
arch/microblaze/include/asm/uaccess.h | 18 +-
arch/mips/crypto/crc32-mips.c | 46 +-
arch/mips/dec/int-handler.S | 6 +-
arch/mips/dec/prom/Makefile | 2 +-
arch/mips/dec/setup.c | 3 +-
arch/mips/include/asm/dec/prom.h | 15 +-
arch/mips/include/asm/pgalloc.h | 6 +
arch/mips/mm/tlbex.c | 23 +-
arch/mips/rb532/devices.c | 6 +-
arch/nios2/include/asm/uaccess.h | 26 +-
arch/nios2/kernel/signal.c | 20 +-
arch/parisc/include/asm/traps.h | 1 +
arch/parisc/kernel/cache.c | 28 +-
arch/parisc/kernel/traps.c | 2 +
arch/parisc/mm/fault.c | 89 ++++
arch/powerpc/Makefile | 2 +-
arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 30 ++
arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 +-
arch/powerpc/include/asm/io.h | 40 +-
arch/powerpc/include/asm/set_memory.h | 12 +-
arch/powerpc/include/asm/uaccess.h | 3 +
arch/powerpc/kvm/book3s_hv.c | 5 +-
arch/powerpc/kvm/powerpc.c | 4 +-
arch/powerpc/lib/sstep.c | 12 +-
arch/powerpc/mm/fault.c | 14 +-
arch/powerpc/mm/kasan/kasan_init_32.c | 3 +-
arch/powerpc/mm/numa.c | 4 +-
arch/powerpc/mm/pageattr.c | 39 +-
arch/powerpc/mm/pgtable_32.c | 24 +-
arch/powerpc/perf/imc-pmu.c | 6 +-
arch/powerpc/platforms/8xx/pic.c | 1 +
arch/powerpc/platforms/powernv/rng.c | 6 +-
arch/powerpc/platforms/pseries/pci_dlpar.c | 4 +
arch/powerpc/sysdev/fsl_gtm.c | 4 +-
arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +
arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts | 2 +
arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +
arch/riscv/boot/dts/canaan/sipeed_maixduino.dts | 2 +
arch/riscv/include/asm/module.lds.h | 6 +-
arch/riscv/include/asm/thread_info.h | 10 +-
arch/riscv/kernel/perf_callchain.c | 6 +-
arch/sparc/kernel/signal_32.c | 2 +-
arch/um/drivers/mconsole_kern.c | 3 +-
arch/x86/events/intel/pt.c | 2 +-
arch/x86/kernel/kvm.c | 2 +-
arch/x86/kvm/emulate.c | 14 +-
arch/x86/kvm/hyperv.c | 96 +++--
arch/x86/kvm/lapic.c | 9 +-
arch/x86/kvm/mmu.h | 1 +
arch/x86/kvm/mmu/paging_tmpl.h | 77 ++--
arch/x86/kvm/mmu/tdp_mmu.c | 61 ++-
arch/x86/kvm/mmu/tdp_mmu.h | 3 -
arch/x86/kvm/svm/avic.c | 10 +-
arch/x86/kvm/svm/sev.c | 36 +-
arch/x86/kvm/x86.c | 3 +-
arch/x86/xen/pmu.c | 10 +-
arch/x86/xen/pmu.h | 3 +-
arch/x86/xen/smp_pv.c | 2 +-
arch/xtensa/include/asm/pgtable.h | 4 +
arch/xtensa/include/asm/processor.h | 4 +-
arch/xtensa/kernel/jump_label.c | 2 +-
arch/xtensa/kernel/mxhead.S | 2 +
arch/xtensa/mm/tlb.c | 6 +
block/bfq-cgroup.c | 6 +
block/bfq-iosched.c | 31 +-
block/bfq-wf2q.c | 2 +-
block/bio.c | 3 +-
block/blk-cgroup.c | 10 +-
block/blk-iolatency.c | 2 +-
block/blk-merge.c | 36 +-
block/blk-mq-sched.c | 9 +-
block/blk-mq.c | 60 ++-
block/blk-rq-qos.h | 20 +-
block/blk-sysfs.c | 8 +-
block/blk-throttle.c | 10 +-
block/blk-throttle.h | 2 -
block/genhd.c | 2 +-
crypto/asymmetric_keys/pkcs7_verify.c | 6 -
crypto/asymmetric_keys/public_key.c | 126 ++++--
crypto/asymmetric_keys/x509_public_key.c | 6 -
crypto/authenc.c | 2 +-
crypto/rsa-pkcs1pad.c | 11 +-
crypto/xts.c | 1 +
drivers/acpi/acpica/nswalk.c | 3 +
drivers/acpi/apei/bert.c | 10 +-
drivers/acpi/apei/erst.c | 2 +-
drivers/acpi/apei/hest.c | 2 +-
drivers/acpi/bus.c | 27 +-
drivers/acpi/cppc_acpi.c | 5 +
drivers/acpi/property.c | 2 +-
drivers/base/dd.c | 2 +-
drivers/base/memory.c | 8 +-
drivers/base/power/domain.c | 2 +-
drivers/base/power/main.c | 6 +-
drivers/block/drbd/drbd_req.c | 3 +-
drivers/block/loop.c | 11 +-
drivers/block/n64cart.c | 2 +-
drivers/bluetooth/btintel.c | 11 +-
drivers/bluetooth/btintel.h | 1 +
drivers/bluetooth/btmtksdio.c | 4 +-
drivers/bluetooth/btusb.c | 6 +
drivers/bluetooth/hci_h5.c | 8 +-
drivers/bluetooth/hci_serdev.c | 3 +-
drivers/bus/mhi/core/debugfs.c | 26 +-
drivers/bus/mhi/core/init.c | 36 +-
drivers/bus/mhi/core/internal.h | 119 +++---
drivers/bus/mhi/core/main.c | 22 +-
drivers/bus/mhi/core/pm.c | 4 +-
drivers/bus/mhi/pci_generic.c | 1 +
drivers/bus/mips_cdmm.c | 1 +
drivers/char/hw_random/Kconfig | 2 +-
drivers/char/hw_random/atmel-rng.c | 1 +
drivers/char/hw_random/cavium-rng-vf.c | 194 ++++++++-
drivers/char/hw_random/cavium-rng.c | 11 +-
drivers/char/hw_random/nomadik-rng.c | 4 +-
drivers/char/tpm/tpm-chip.c | 46 +-
drivers/char/tpm/tpm.h | 2 +
drivers/char/tpm/tpm2-space.c | 65 +++
drivers/char/virtio_console.c | 7 +
drivers/clk/actions/owl-s700.c | 1 +
drivers/clk/actions/owl-s900.c | 2 +-
drivers/clk/at91/sama7g5.c | 8 +-
drivers/clk/clk-clps711x.c | 2 +
drivers/clk/clk.c | 16 +-
drivers/clk/hisilicon/clk-hi3559a.c | 4 +-
drivers/clk/imx/clk-imx7d.c | 1 -
drivers/clk/imx/clk-imx8qxp-lpcg.c | 2 +-
drivers/clk/loongson1/clk-loongson1c.c | 1 +
drivers/clk/qcom/clk-rcg2.c | 14 +-
drivers/clk/qcom/gcc-ipq8074.c | 21 +-
drivers/clk/qcom/gcc-msm8994.c | 1 +
drivers/clk/renesas/r9a07g044-cpg.c | 4 +-
drivers/clk/rockchip/clk.c | 3 +
drivers/clk/tegra/clk-tegra124-emc.c | 1 +
drivers/clk/uniphier/clk-uniphier-fixed-rate.c | 1 +
drivers/clocksource/acpi_pm.c | 6 +-
drivers/clocksource/exynos_mct.c | 60 ++-
drivers/clocksource/timer-microchip-pit64b.c | 2 +-
drivers/clocksource/timer-of.c | 6 +-
drivers/clocksource/timer-ti-dm-systimer.c | 4 +-
drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 +-
drivers/cpuidle/cpuidle-qcom-spm.c | 20 +
.../crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c | 3 +
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c | 3 +
.../crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 3 +
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c | 2 +
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 3 +
drivers/crypto/amlogic/amlogic-gxl-cipher.c | 2 +
drivers/crypto/ccp/ccp-dmaengine.c | 16 +
drivers/crypto/ccp/sev-dev.c | 2 +-
drivers/crypto/ccree/cc_buffer_mgr.c | 7 +
drivers/crypto/ccree/cc_cipher.c | 2 +-
drivers/crypto/gemini/sl3516-ce-cipher.c | 2 +
drivers/crypto/hisilicon/qm.c | 2 +-
drivers/crypto/hisilicon/sec2/sec_crypto.c | 16 +-
drivers/crypto/hisilicon/sec2/sec_main.c | 8 +-
drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c | 17 +-
drivers/crypto/mxs-dcp.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 1 -
drivers/crypto/vmx/Kconfig | 4 +
drivers/cxl/core/bus.c | 4 +
drivers/cxl/core/regs.c | 6 +-
drivers/dax/super.c | 1 +
drivers/dma-buf/udmabuf.c | 4 +
drivers/dma/hisi_dma.c | 2 +-
drivers/dma/idxd/device.c | 34 +-
drivers/dma/idxd/idxd.h | 12 +-
drivers/dma/idxd/init.c | 6 +-
drivers/dma/idxd/registers.h | 14 +-
drivers/dma/idxd/sysfs.c | 42 +-
drivers/firmware/efi/efi-pstore.c | 2 +-
drivers/firmware/google/Kconfig | 2 +-
drivers/firmware/qcom_scm.c | 6 -
drivers/firmware/stratix10-svc.c | 2 +-
drivers/firmware/sysfb_simplefb.c | 23 +-
drivers/fsi/fsi-master-aspeed.c | 17 +-
drivers/fsi/fsi-scom.c | 45 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 15 +
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 11 -
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +-
.../amd/display/dc/irq/dcn21/irq_service_dcn21.c | 14 -
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 4 +-
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +-
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 29 +-
drivers/gpu/drm/bridge/analogix/anx7625.c | 3 +-
drivers/gpu/drm/bridge/cdns-dsi.c | 1 +
drivers/gpu/drm/bridge/nwl-dsi.c | 1 +
drivers/gpu/drm/bridge/sil-sii8620.c | 2 +-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 5 +-
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1 +
drivers/gpu/drm/drm_edid.c | 18 +-
drivers/gpu/drm/drm_fb_helper.c | 9 +-
drivers/gpu/drm/drm_syncobj.c | 61 ++-
drivers/gpu/drm/i915/display/intel_bw.c | 3 +-
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
drivers/gpu/drm/i915/display/intel_hdmi.c | 13 +-
drivers/gpu/drm/i915/display/intel_opregion.c | 15 +
drivers/gpu/drm/i915/display/intel_pps.c | 6 +-
drivers/gpu/drm/i915/display/intel_pps.h | 2 +-
drivers/gpu/drm/i915/display/intel_psr.c | 4 +
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
drivers/gpu/drm/i915/intel_pm.c | 10 +-
drivers/gpu/drm/meson/Makefile | 1 +
drivers/gpu/drm/meson/meson_drv.c | 28 +-
drivers/gpu/drm/meson/meson_dw_hdmi.c | 341 +--------------
drivers/gpu/drm/meson/meson_encoder_hdmi.c | 370 +++++++++++++++++
drivers/gpu/drm/meson/meson_encoder_hdmi.h | 12 +
drivers/gpu/drm/meson/meson_osd_afbcd.c | 41 +-
drivers/gpu/drm/meson/meson_osd_afbcd.h | 1 +
drivers/gpu/drm/mgag200/mgag200_mode.c | 5 +-
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 8 +
drivers/gpu/drm/msm/dp/dp_ctrl.c | 3 +
drivers/gpu/drm/msm/dp/dp_display.c | 5 +
drivers/gpu/drm/msm/dp/dp_panel.c | 5 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 26 +-
drivers/gpu/drm/nouveau/nouveau_backlight.c | 6 +-
drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c | 9 +-
drivers/gpu/drm/panfrost/panfrost_gpu.c | 5 +-
drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c | 4 +-
drivers/gpu/drm/tegra/dsi.c | 4 +-
drivers/gpu/drm/tiny/simpledrm.c | 3 +
drivers/gpu/drm/v3d/v3d_drv.c | 8 +-
drivers/gpu/host1x/dev.c | 1 +
drivers/greybus/svc.c | 8 +-
drivers/hid/hid-logitech-dj.c | 1 +
drivers/hid/hid-thrustmaster.c | 2 +
drivers/hid/i2c-hid/i2c-hid-core.c | 32 +-
drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 29 +-
drivers/hv/hv_balloon.c | 2 +-
drivers/hwmon/pmbus/pmbus.h | 1 +
drivers/hwmon/pmbus/pmbus_core.c | 18 +-
drivers/hwmon/sch56xx-common.c | 2 +-
.../hwtracing/coresight/coresight-etm4x-sysfs.c | 8 +-
drivers/hwtracing/coresight/coresight-syscfg.c | 2 +-
drivers/i2c/busses/i2c-bcm2835.c | 26 +-
drivers/i2c/busses/i2c-meson.c | 12 +-
drivers/i2c/busses/i2c-pasemi-core.c | 1 -
drivers/i2c/busses/i2c-pasemi-pci.c | 1 +
drivers/i2c/busses/i2c-xiic.c | 3 +-
drivers/i2c/muxes/i2c-demux-pinctrl.c | 5 +-
drivers/iio/accel/mma8452.c | 29 +-
drivers/iio/adc/aspeed_adc.c | 4 +-
drivers/iio/adc/twl6030-gpadc.c | 2 +
drivers/iio/afe/iio-rescale.c | 8 +-
drivers/iio/inkern.c | 40 +-
drivers/infiniband/core/cma.c | 2 +-
drivers/infiniband/core/nldev.c | 3 +-
drivers/infiniband/core/verbs.c | 1 +
drivers/infiniband/hw/hfi1/verbs.c | 3 +-
drivers/infiniband/hw/irdma/ctrl.c | 10 +-
drivers/infiniband/hw/irdma/hw.c | 2 +-
drivers/infiniband/hw/irdma/i40iw_if.c | 1 +
drivers/infiniband/hw/irdma/main.c | 1 +
drivers/infiniband/hw/irdma/main.h | 1 +
drivers/infiniband/hw/irdma/utils.c | 48 ++-
drivers/infiniband/hw/irdma/verbs.c | 4 +-
drivers/infiniband/hw/mlx5/devx.c | 4 +-
drivers/infiniband/hw/mlx5/mr.c | 2 +
drivers/infiniband/sw/rxe/rxe_av.c | 19 +-
drivers/infiniband/sw/rxe/rxe_loc.h | 5 +-
drivers/infiniband/sw/rxe/rxe_net.c | 17 +-
drivers/infiniband/sw/rxe/rxe_req.c | 63 +--
drivers/infiniband/sw/rxe/rxe_resp.c | 12 +-
drivers/input/input.c | 6 -
drivers/input/touchscreen/zinitix.c | 44 +-
drivers/iommu/iova.c | 5 +-
drivers/iommu/ipmmu-vmsa.c | 4 +-
drivers/iommu/mtk_iommu.c | 32 +-
drivers/iommu/mtk_iommu_v1.c | 40 +-
drivers/irqchip/irq-nvic.c | 2 +
drivers/irqchip/qcom-pdc.c | 5 +-
drivers/mailbox/imx-mailbox.c | 11 +-
drivers/mailbox/tegra-hsp.c | 5 +
drivers/md/bcache/btree.c | 6 +-
drivers/md/bcache/writeback.c | 6 +-
drivers/md/dm-core.h | 2 +
drivers/md/dm-crypt.c | 2 +-
drivers/md/dm-integrity.c | 6 +-
drivers/md/dm-stats.c | 34 +-
drivers/md/dm-stats.h | 11 +-
drivers/md/dm.c | 86 ++--
drivers/media/i2c/adv7511-v4l2.c | 2 +-
drivers/media/i2c/adv7604.c | 2 +-
drivers/media/i2c/adv7842.c | 2 +-
drivers/media/i2c/ov5640.c | 14 +-
drivers/media/i2c/ov5648.c | 12 +-
drivers/media/i2c/ov6650.c | 115 +++--
drivers/media/pci/bt8xx/bttv-driver.c | 4 +-
drivers/media/pci/cx88/cx88-mpeg.c | 3 +
drivers/media/pci/ivtv/ivtv-driver.h | 1 -
drivers/media/pci/ivtv/ivtv-ioctl.c | 10 +-
drivers/media/pci/ivtv/ivtv-streams.c | 11 +-
drivers/media/pci/saa7134/saa7134-alsa.c | 4 +-
drivers/media/platform/aspeed-video.c | 9 +-
drivers/media/platform/atmel/atmel-isc-base.c | 22 +-
drivers/media/platform/atmel/atmel-sama7g5-isc.c | 6 -
drivers/media/platform/coda/coda-common.c | 1 +
drivers/media/platform/davinci/vpif.c | 109 +++--
drivers/media/platform/imx-jpeg/mxc-jpeg.c | 7 +-
drivers/media/platform/meson/ge2d/ge2d.c | 24 +-
.../media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c | 2 +
drivers/media/platform/omap3isp/ispstat.c | 5 +-
drivers/media/platform/qcom/camss/camss-csid-170.c | 19 +-
drivers/media/platform/qcom/camss/camss-vfe-170.c | 12 +-
drivers/media/platform/qcom/venus/helpers.c | 2 +-
drivers/media/platform/qcom/venus/hfi_cmds.c | 2 +
drivers/media/platform/qcom/venus/venc.c | 4 +-
drivers/media/platform/qcom/venus/venc_ctrls.c | 6 +-
drivers/media/platform/ti-vpe/cal-video.c | 3 +
drivers/media/rc/gpio-ir-tx.c | 28 +-
drivers/media/rc/ir_toy.c | 2 +-
drivers/media/test-drivers/vidtv/vidtv_s302m.c | 17 +-
drivers/media/usb/em28xx/em28xx-cards.c | 13 +-
drivers/media/usb/go7007/s2250-board.c | 10 +-
drivers/media/usb/hdpvr/hdpvr-video.c | 4 +-
drivers/media/usb/stk1160/stk1160-core.c | 2 +-
drivers/media/usb/stk1160/stk1160-v4l.c | 10 +-
drivers/media/usb/stk1160/stk1160.h | 2 +-
drivers/media/v4l2-core/v4l2-ctrls-core.c | 10 +
drivers/media/v4l2-core/v4l2-ioctl.c | 12 +-
drivers/media/v4l2-core/v4l2-mem2mem.c | 53 ++-
drivers/memory/emif.c | 8 +-
drivers/memory/tegra/tegra20-emc.c | 2 +-
drivers/memstick/core/mspro_block.c | 10 +-
drivers/mfd/asic3.c | 10 +-
drivers/mfd/mc13xxx-core.c | 4 +-
drivers/misc/cardreader/alcor_pci.c | 9 +-
drivers/misc/habanalabs/common/debugfs.c | 2 +
drivers/misc/kgdbts.c | 4 +-
drivers/misc/mei/hw-me-regs.h | 2 +
drivers/misc/mei/hw-me.c | 23 +-
drivers/misc/mei/interrupt.c | 35 +-
drivers/misc/mei/pci-me.c | 1 +
drivers/mmc/core/bus.c | 9 +-
drivers/mmc/core/bus.h | 3 +-
drivers/mmc/core/host.c | 15 +-
drivers/mmc/core/mmc.c | 16 +-
drivers/mmc/core/sd.c | 25 +-
drivers/mmc/core/sdio.c | 5 +-
drivers/mmc/core/sdio_bus.c | 7 +-
drivers/mmc/host/davinci_mmc.c | 6 +-
drivers/mmc/host/rtsx_pci_sdmmc.c | 20 +-
drivers/mmc/host/sdhci_am654.c | 24 +-
drivers/mtd/devices/mchp23k256.c | 14 +
drivers/mtd/devices/mchp48l640.c | 10 +
drivers/mtd/nand/onenand/generic.c | 7 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 3 +
drivers/mtd/nand/raw/nand_base.c | 44 +-
drivers/mtd/nand/raw/pl35x-nand-controller.c | 2 +-
drivers/mtd/ubi/build.c | 9 +-
drivers/mtd/ubi/fastmap.c | 28 +-
drivers/mtd/ubi/vmt.c | 8 +-
drivers/net/bareudp.c | 19 +-
drivers/net/can/m_can/m_can.c | 5 +-
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
drivers/net/can/usb/ems_usb.c | 1 -
drivers/net/can/usb/mcba_usb.c | 27 +-
drivers/net/can/usb/usb_8dev.c | 30 +-
drivers/net/can/vxcan.c | 2 +-
drivers/net/dsa/Kconfig | 12 +-
drivers/net/dsa/Makefile | 3 +-
drivers/net/dsa/bcm_sf2_cfp.c | 6 +-
drivers/net/dsa/microchip/ksz8795_spi.c | 11 +
drivers/net/dsa/microchip/ksz9477_spi.c | 12 +
drivers/net/dsa/mv88e6xxx/chip.c | 1 +
drivers/net/dsa/realtek/Kconfig | 20 +
drivers/net/dsa/realtek/Makefile | 3 +
drivers/net/dsa/{ => realtek}/realtek-smi-core.c | 0
drivers/net/dsa/{ => realtek}/realtek-smi-core.h | 4 +-
drivers/net/dsa/{ => realtek}/rtl8365mb.c | 0
drivers/net/dsa/{ => realtek}/rtl8366.c | 0
drivers/net/dsa/{ => realtek}/rtl8366rb.c | 2 +
drivers/net/ethernet/8390/mcf8390.c | 10 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c | 6 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h | 2 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 +-
.../net/ethernet/freescale/enetc/enetc_ethtool.c | 5 +-
drivers/net/ethernet/freescale/enetc/enetc_qos.c | 128 +++---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 18 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 15 +-
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.h | 1 -
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 47 ++-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 234 ++++++++---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 4 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 12 +-
drivers/net/ethernet/ibm/ibmvnic.c | 63 ++-
drivers/net/ethernet/ibm/ibmvnic.h | 7 +-
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 19 +-
drivers/net/ethernet/intel/ice/ice.h | 4 +-
drivers/net/ethernet/intel/ice/ice_idc.c | 3 +
drivers/net/ethernet/intel/ice/ice_main.c | 25 +-
drivers/net/ethernet/intel/ice/ice_xsk.c | 16 +-
drivers/net/ethernet/intel/igb/igb_ethtool.c | 4 -
drivers/net/ethernet/intel/igb/igb_main.c | 19 +-
drivers/net/ethernet/intel/igc/igc_main.c | 16 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 27 +-
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 15 +-
drivers/net/ethernet/microchip/sparx5/Kconfig | 2 +
.../net/ethernet/microchip/sparx5/sparx5_fdma.c | 2 +
.../net/ethernet/pensando/ionic/ionic_bus_pci.c | 4 +-
drivers/net/ethernet/pensando/ionic/ionic_dev.c | 20 +-
drivers/net/ethernet/pensando/ionic/ionic_dev.h | 1 +
drivers/net/ethernet/pensando/ionic/ionic_main.c | 34 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 29 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 1 +
drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h | 10 +-
drivers/net/ethernet/sun/sunhme.c | 6 +-
drivers/net/ethernet/ti/cpsw_ethtool.c | 6 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 72 ++--
drivers/net/phy/at803x.c | 40 +-
drivers/net/phy/broadcom.c | 21 +
drivers/net/phy/micrel.c | 32 +-
drivers/net/usb/asix.h | 4 +-
drivers/net/usb/asix_common.c | 19 +-
drivers/net/usb/asix_devices.c | 21 +-
drivers/net/wireguard/queueing.c | 3 +-
drivers/net/wireguard/socket.c | 5 +-
drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
drivers/net/wireless/ath/ath10k/wow.c | 7 +-
drivers/net/wireless/ath/ath11k/dp_rx.c | 72 ++--
drivers/net/wireless/ath/ath11k/mac.c | 3 +
drivers/net/wireless/ath/ath9k/htc_hst.c | 5 +
drivers/net/wireless/ath/carl9170/main.c | 2 +-
.../broadcom/brcm80211/brcmfmac/firmware.c | 2 +
.../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 73 ++--
.../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 -
drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c | 2 +-
drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 2 -
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 13 +-
drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 2 -
drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 +
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 +-
drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 3 +-
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 5 +-
drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/main.c | 3 +
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 8 +
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 +
.../net/wireless/mediatek/mt76/mt76_connac_mcu.c | 2 +-
.../net/wireless/mediatek/mt76/mt76_connac_mcu.h | 3 +-
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 1 -
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 67 ++-
.../net/wireless/mediatek/mt76/mt7921/debugfs.c | 16 +-
drivers/net/wireless/mediatek/mt76/mt7921/dma.c | 119 ------
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 21 +-
drivers/net/wireless/mediatek/mt76/mt7921/mac.h | 3 +
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 49 +--
drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h | 1 +
drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 124 ++++++
.../net/wireless/mediatek/mt76/mt7921/pci_mcu.c | 18 +-
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 11 +-
.../net/wireless/mediatek/mt76/mt7921/sdio_mcu.c | 38 ++
drivers/net/wireless/mediatek/mt76/sdio.h | 2 +
drivers/net/wireless/ray_cs.c | 6 +
drivers/nvdimm/region_devs.c | 3 +
drivers/nvme/host/core.c | 48 ++-
drivers/nvme/host/multipath.c | 7 +-
drivers/nvme/host/nvme.h | 19 +
drivers/nvme/host/tcp.c | 40 ++
drivers/pci/access.c | 9 +-
drivers/pci/controller/dwc/pci-imx6.c | 10 +-
drivers/pci/controller/dwc/pcie-fu740.c | 51 ++-
drivers/pci/controller/pci-aardvark.c | 13 +-
drivers/pci/controller/pci-xgene.c | 2 +-
drivers/pci/hotplug/pciehp_hpc.c | 2 +
drivers/pci/quirks.c | 12 +
drivers/phy/broadcom/phy-brcm-usb-init.c | 36 ++
drivers/phy/broadcom/phy-brcm-usb-init.h | 1 +
drivers/phy/broadcom/phy-brcm-usb.c | 11 +-
drivers/phy/phy-core-mipi-dphy.c | 4 +-
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 2 +
drivers/pinctrl/mediatek/pinctrl-paris.c | 32 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 4 +-
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 185 ++++-----
drivers/pinctrl/pinconf-generic.c | 6 +-
drivers/pinctrl/pinctrl-ingenic.c | 46 +-
drivers/pinctrl/pinctrl-microchip-sgpio.c | 15 +
drivers/pinctrl/pinctrl-rockchip.c | 2 +
drivers/pinctrl/renesas/core.c | 5 +-
drivers/pinctrl/renesas/pfc-r8a77470.c | 4 +-
drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 2 -
drivers/pinctrl/samsung/pinctrl-samsung.c | 30 +-
drivers/platform/chrome/Makefile | 3 +-
drivers/platform/chrome/cros_ec_sensorhub_ring.c | 3 +-
drivers/platform/chrome/cros_ec_sensorhub_trace.h | 123 ++++++
drivers/platform/chrome/cros_ec_trace.h | 95 -----
drivers/platform/chrome/cros_ec_typec.c | 6 +
drivers/platform/x86/huawei-wmi.c | 13 +-
drivers/power/reset/gemini-poweroff.c | 4 +-
drivers/power/supply/ab8500_chargalg.c | 4 +-
drivers/power/supply/ab8500_fg.c | 4 +-
drivers/power/supply/bq24190_charger.c | 7 +-
drivers/power/supply/sbs-charger.c | 18 +-
drivers/power/supply/wm8350_power.c | 97 ++++-
drivers/powercap/dtpm_cpu.c | 7 +
drivers/pps/clients/pps-gpio.c | 2 +-
drivers/ptp/ptp_clock.c | 11 +-
drivers/pwm/pwm-lpc18xx-sct.c | 20 +-
drivers/regulator/qcom_smd-regulator.c | 4 +-
drivers/regulator/rpi-panel-attiny-regulator.c | 56 ++-
drivers/remoteproc/qcom_q6v5_adsp.c | 1 +
drivers/remoteproc/qcom_q6v5_mss.c | 11 +-
drivers/remoteproc/qcom_wcnss.c | 1 +
drivers/remoteproc/remoteproc_debugfs.c | 2 +-
drivers/rtc/interface.c | 7 +-
drivers/rtc/rtc-mc146818-lib.c | 6 +-
drivers/rtc/rtc-pl031.c | 6 +-
drivers/scsi/fnic/fnic_scsi.c | 15 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
drivers/scsi/libsas/sas_ata.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 25 +-
drivers/scsi/pm8001/pm8001_hwi.c | 23 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 209 +++++-----
drivers/scsi/qla2xxx/qla_attr.c | 7 +-
drivers/scsi/qla2xxx/qla_bsg.c | 6 +-
drivers/scsi/qla2xxx/qla_def.h | 22 +-
drivers/scsi/qla2xxx/qla_edif.c | 25 +-
drivers/scsi/qla2xxx/qla_gbl.h | 4 +-
drivers/scsi/qla2xxx/qla_gs.c | 160 +++----
drivers/scsi/qla2xxx/qla_init.c | 233 ++++++-----
drivers/scsi/qla2xxx/qla_inline.h | 2 +
drivers/scsi/qla2xxx/qla_iocb.c | 93 +++--
drivers/scsi/qla2xxx/qla_isr.c | 1 +
drivers/scsi/qla2xxx/qla_mbx.c | 29 +-
drivers/scsi/qla2xxx/qla_mid.c | 9 +-
drivers/scsi/qla2xxx/qla_mr.c | 11 +-
drivers/scsi/qla2xxx/qla_nvme.c | 22 +
drivers/scsi/qla2xxx/qla_os.c | 54 ++-
drivers/scsi/qla2xxx/qla_sup.c | 4 +-
drivers/scsi/qla2xxx/qla_target.c | 14 +-
drivers/scsi/qla2xxx/qla_tmpl.c | 9 +-
drivers/scsi/scsi_error.c | 9 +-
drivers/scsi/scsi_transport_fc.c | 39 +-
drivers/scsi/sd.c | 6 +-
drivers/scsi/ufs/ufshcd.c | 21 +-
drivers/soc/mediatek/mtk-pm-domains.c | 3 +
drivers/soc/qcom/ocmem.c | 1 +
drivers/soc/qcom/qcom_aoss.c | 8 +-
drivers/soc/qcom/rpmpd.c | 3 +
drivers/soc/ti/wkup_m3_ipc.c | 4 +-
drivers/soundwire/dmi-quirks.c | 2 +-
drivers/soundwire/intel.c | 4 +-
drivers/spi/spi-fsi.c | 10 +
drivers/spi/spi-mt65xx.c | 15 +-
drivers/spi/spi-mxic.c | 28 +-
drivers/spi/spi-pxa2xx-pci.c | 17 +-
drivers/spi/spi-tegra114.c | 4 +
drivers/spi/spi-tegra20-slink.c | 8 +-
drivers/spi/spi-tegra210-quad.c | 2 +
drivers/spi/spi-zynqmp-gqspi.c | 5 +-
drivers/spi/spi.c | 4 +-
drivers/staging/iio/adc/ad7280a.c | 4 +-
drivers/staging/media/atomisp/pci/atomisp_acc.c | 28 +-
.../media/atomisp/pci/atomisp_gmin_platform.c | 18 +
drivers/staging/media/atomisp/pci/hmm/hmm.c | 7 +-
drivers/staging/media/hantro/hantro_h1_jpeg_enc.c | 2 +-
drivers/staging/media/hantro/hantro_h1_regs.h | 2 +-
drivers/staging/media/imx/imx7-mipi-csis.c | 6 +-
drivers/staging/media/imx/imx8mq-mipi-csi2.c | 74 ++--
drivers/staging/media/meson/vdec/esparser.c | 7 +-
drivers/staging/media/meson/vdec/vdec_helpers.c | 8 +-
drivers/staging/media/meson/vdec/vdec_helpers.h | 4 +-
drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 2 +-
drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 2 +-
drivers/staging/media/zoran/zoran.h | 2 +-
drivers/staging/media/zoran/zoran_card.c | 86 ++--
drivers/staging/media/zoran/zoran_device.c | 7 +-
drivers/staging/media/zoran/zoran_driver.c | 18 +-
drivers/staging/mt7621-dts/gbpc1.dts | 40 +-
drivers/staging/mt7621-dts/gbpc2.dts | 116 +++++-
drivers/staging/mt7621-dts/mt7621.dtsi | 26 +-
drivers/staging/qlge/qlge_main.c | 11 +-
drivers/staging/r8188eu/core/rtw_recv.c | 3 +-
drivers/staging/r8188eu/hal/rtl8188e_hal_init.c | 4 +-
.../intel/int340x_thermal/int3400_thermal.c | 7 +-
drivers/tty/hvc/hvc_iucv.c | 4 +-
drivers/tty/mxser.c | 15 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 2 +-
drivers/tty/serial/8250/8250_dma.c | 11 +-
drivers/tty/serial/8250/8250_lpss.c | 28 +-
drivers/tty/serial/8250/8250_mid.c | 19 +-
drivers/tty/serial/8250/8250_port.c | 24 +-
drivers/tty/serial/kgdboc.c | 6 +-
drivers/tty/serial/serial_core.c | 14 +
drivers/usb/host/xhci-hub.c | 5 +-
drivers/usb/host/xhci-mem.c | 2 +-
drivers/usb/host/xhci.c | 20 +-
drivers/usb/host/xhci.h | 14 +-
drivers/usb/serial/Kconfig | 1 +
drivers/usb/serial/pl2303.c | 2 +
drivers/usb/serial/pl2303.h | 3 +
drivers/usb/serial/usb-serial-simple.c | 7 +
drivers/usb/storage/ene_ub6250.c | 155 ++++---
drivers/usb/storage/realtek_cr.c | 2 +-
drivers/usb/typec/tipd/core.c | 5 +
drivers/usb/typec/tipd/tps6598x.h | 1 +
drivers/vdpa/mlx5/net/mlx5_vnet.c | 25 +-
drivers/vfio/pci/vfio_pci_core.c | 61 +++
drivers/vhost/iotlb.c | 6 +-
drivers/video/fbdev/atafb.c | 12 +-
drivers/video/fbdev/atmel_lcdfb.c | 11 +-
drivers/video/fbdev/cirrusfb.c | 16 +-
drivers/video/fbdev/controlfb.c | 2 +
drivers/video/fbdev/core/fbcvt.c | 53 +--
drivers/video/fbdev/core/fbmem.c | 29 +-
drivers/video/fbdev/matrox/matroxfb_base.c | 2 +-
drivers/video/fbdev/nvidia/nv_i2c.c | 2 +-
.../fbdev/omap2/omapfb/displays/connector-dvi.c | 1 +
.../fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 8 +-
.../omap2/omapfb/displays/panel-sony-acx565akm.c | 2 +-
.../omap2/omapfb/displays/panel-tpo-td043mtea1.c | 4 +-
drivers/video/fbdev/sm712fb.c | 46 +-
drivers/video/fbdev/smscufx.c | 3 +-
drivers/video/fbdev/udlfb.c | 8 +-
drivers/video/fbdev/w100fb.c | 15 +-
drivers/virt/acrn/hsm.c | 20 +-
drivers/virt/acrn/mm.c | 24 ++
drivers/virtio/virtio.c | 5 +-
drivers/virtio/virtio_pci_common.c | 48 +--
drivers/virtio/virtio_pci_common.h | 7 +-
drivers/virtio/virtio_pci_legacy.c | 5 +-
drivers/virtio/virtio_pci_modern.c | 6 +-
drivers/watchdog/rti_wdt.c | 1 +
fs/binfmt_elf.c | 90 ++--
fs/binfmt_elf_fdpic.c | 18 +-
fs/btrfs/block-group.c | 8 +-
fs/btrfs/compression.c | 20 +-
fs/btrfs/disk-io.c | 26 +-
fs/btrfs/extent_io.c | 22 +-
fs/btrfs/file-item.c | 38 +-
fs/btrfs/inode.c | 8 +-
fs/btrfs/reflink.c | 7 +-
fs/btrfs/space-info.c | 3 +-
fs/btrfs/volumes.c | 48 ++-
fs/buffer.c | 8 +-
fs/cifs/cifsfs.c | 14 +-
fs/cifs/connect.c | 14 +-
fs/cifs/file.c | 10 +
fs/cifs/smb2ops.c | 130 +++---
fs/coredump.c | 86 +++-
fs/exec.c | 26 +-
fs/ext2/super.c | 6 +-
fs/ext4/inline.c | 9 +-
fs/ext4/inode.c | 25 ++
fs/ext4/mballoc.c | 128 +++---
fs/ext4/namei.c | 10 +-
fs/f2fs/checkpoint.c | 8 +-
fs/f2fs/compress.c | 5 +-
fs/f2fs/data.c | 8 +-
fs/f2fs/debug.c | 18 +-
fs/f2fs/f2fs.h | 1 +
fs/f2fs/file.c | 5 +-
fs/f2fs/gc.c | 4 +-
fs/f2fs/inode.c | 7 +-
fs/f2fs/node.c | 6 +-
fs/f2fs/segment.c | 7 +
fs/f2fs/super.c | 10 +-
fs/f2fs/sysfs.c | 2 +-
fs/file.c | 31 +-
fs/gfs2/bmap.c | 2 +-
fs/gfs2/file.c | 3 +-
fs/gfs2/inode.c | 2 +-
fs/gfs2/rgrp.c | 10 +-
fs/gfs2/rgrp.h | 2 +-
fs/gfs2/super.c | 2 +-
fs/io_uring.c | 18 +-
fs/jffs2/build.c | 4 +-
fs/jffs2/fs.c | 2 +-
fs/jffs2/scan.c | 6 +-
fs/jfs/jfs_dmap.c | 7 +
fs/nfs/callback_proc.c | 27 +-
fs/nfs/callback_xdr.c | 4 -
fs/nfs/nfs2xdr.c | 2 +-
fs/nfs/nfs3xdr.c | 22 +-
fs/nfs/nfs4proc.c | 1 +
fs/nfs/pagelist.c | 1 +
fs/nfs/pnfs.c | 11 +
fs/nfs/pnfs.h | 2 +
fs/nfs/proc.c | 1 +
fs/nfs/write.c | 7 +-
fs/nfsd/filecache.c | 6 +-
fs/nfsd/nfs4state.c | 12 +-
fs/nfsd/nfsproc.c | 2 +-
fs/nfsd/xdr.h | 2 +-
fs/ntfs/inode.c | 4 +
fs/ocfs2/quota_global.c | 23 +-
fs/ocfs2/quota_local.c | 2 -
fs/proc/bootconfig.c | 2 +
fs/pstore/platform.c | 38 +-
fs/ubifs/dir.c | 238 ++++++-----
fs/ubifs/file.c | 14 +-
fs/ubifs/io.c | 34 +-
fs/ubifs/ioctl.c | 2 +-
fs/ubifs/journal.c | 52 ++-
include/drm/drm_connector.h | 12 +-
include/drm/drm_dp_helper.h | 2 +-
include/drm/drm_modeset_lock.h | 1 +
include/linux/atomic/atomic-arch-fallback.h | 38 +-
include/linux/binfmts.h | 3 +
include/linux/blk-cgroup.h | 17 +
include/linux/blk_types.h | 3 +-
include/linux/coredump.h | 5 +-
include/linux/fb.h | 1 +
include/linux/lsm_hook_defs.h | 2 +
include/linux/lsm_hooks.h | 5 +
include/linux/mm.h | 14 -
include/linux/mtd/rawnand.h | 2 +
include/linux/netfilter_netdev.h | 2 +-
include/linux/nvme.h | 1 +
include/linux/pci.h | 1 +
include/linux/pstore.h | 6 +-
include/linux/randomize_kstack.h | 16 +-
include/linux/sched.h | 19 +-
include/linux/security.h | 8 +
include/linux/serial_core.h | 2 +
include/linux/skbuff.h | 28 +-
include/linux/skmsg.h | 13 +-
include/linux/soc/ti/ti_sci_protocol.h | 2 +-
include/linux/sunrpc/xdr.h | 2 +
include/linux/sunrpc/xprt.h | 3 +
include/linux/sunrpc/xprtsock.h | 2 +-
include/net/netfilter/nf_conntrack_helper.h | 1 +
include/net/netfilter/nf_flow_table.h | 18 +
include/scsi/scsi_device.h | 1 +
include/sound/pcm.h | 1 +
include/trace/events/ext4.h | 78 ++--
include/trace/events/rxrpc.h | 8 +-
include/trace/events/sched.h | 11 +-
include/uapi/linux/bpf.h | 12 +-
include/uapi/linux/loop.h | 4 +-
include/uapi/linux/omap3isp.h | 21 +-
include/uapi/linux/rfkill.h | 14 +-
include/uapi/linux/rseq.h | 20 +-
include/uapi/linux/serial_core.h | 3 +
kernel/audit.h | 4 +
kernel/auditsc.c | 87 +++-
kernel/bpf/btf.c | 55 ++-
kernel/bpf/stackmap.c | 56 ++-
kernel/debug/kdb/kdb_support.c | 2 +-
kernel/dma/debug.c | 4 +-
kernel/dma/swiotlb.c | 11 +-
kernel/events/core.c | 3 +
kernel/livepatch/core.c | 4 +-
kernel/locking/lockdep.c | 38 +-
kernel/locking/lockdep_internals.h | 6 +-
kernel/locking/lockdep_proc.c | 51 ++-
kernel/power/hibernate.c | 2 +-
kernel/power/suspend_test.c | 8 +-
kernel/printk/printk.c | 6 +-
kernel/ptrace.c | 47 ++-
kernel/rcu/rcu_segcblist.h | 4 +-
kernel/rcu/tree.c | 71 ++--
kernel/rcu/tree.h | 4 +-
kernel/resource.c | 41 +-
kernel/rseq.c | 8 +-
kernel/sched/core.c | 5 +-
kernel/sched/cpuacct.c | 3 +-
kernel/sched/cpufreq_schedutil.c | 1 +
kernel/sched/deadline.c | 12 +-
kernel/sched/debug.c | 10 -
kernel/sched/fair.c | 18 +-
kernel/sched/rt.c | 32 +-
kernel/trace/fgraph.c | 4 +-
kernel/trace/ftrace.c | 4 +-
kernel/trace/trace.c | 9 +-
kernel/trace/trace_events.c | 96 ++++-
kernel/trace/trace_osnoise.c | 4 +-
kernel/trace/trace_sched_switch.c | 1 +
kernel/trace/trace_sched_wakeup.c | 1 +
kernel/watch_queue.c | 4 +-
lib/kunit/try-catch.c | 2 +-
lib/raid6/test/Makefile | 4 +-
lib/raid6/test/test.c | 1 -
lib/test_kmod.c | 1 +
lib/test_lockup.c | 11 +-
lib/test_xarray.c | 22 +
lib/vsprintf.c | 48 ++-
lib/xarray.c | 4 +
mm/kmemleak.c | 9 +-
mm/madvise.c | 3 +-
mm/memcontrol.c | 2 +-
mm/memory.c | 65 ++-
mm/mempolicy.c | 8 +-
mm/mlock.c | 7 +-
mm/mmap.c | 2 +-
mm/page_alloc.c | 9 +-
mm/slab.c | 1 +
mm/usercopy.c | 5 +-
net/bluetooth/hci_conn.c | 2 +
net/can/isotp.c | 69 +--
net/core/skbuff.c | 51 ++-
net/core/skmsg.c | 17 +-
net/dsa/dsa2.c | 5 +
net/ipv4/route.c | 18 +-
net/ipv4/tcp_bpf.c | 14 +-
net/ipv4/tcp_output.c | 5 +-
net/ipv6/xfrm6_output.c | 16 +
net/key/af_key.c | 2 +-
net/mac80211/ieee80211_i.h | 2 +-
net/mac80211/main.c | 13 +-
net/mac80211/mesh.c | 2 +-
net/mac80211/mlme.c | 15 +-
net/mac80211/util.c | 27 +-
net/mptcp/protocol.c | 1 +
net/netfilter/nf_conntrack_core.c | 4 +-
net/netfilter/nf_conntrack_helper.c | 6 +
net/netfilter/nf_conntrack_proto_tcp.c | 17 +-
net/netfilter/nf_flow_table_inet.c | 17 +
net/netfilter/nf_flow_table_ip.c | 18 -
net/netfilter/nft_ct.c | 3 +
net/netlink/af_netlink.c | 2 +
net/openvswitch/conntrack.c | 132 +++---
net/openvswitch/flow_netlink.c | 4 +-
net/rfkill/core.c | 48 ++-
net/rxrpc/ar-internal.h | 15 +-
net/rxrpc/call_event.c | 2 +-
net/rxrpc/call_object.c | 40 +-
net/rxrpc/server_key.c | 7 +-
net/sched/act_ct.c | 19 +-
net/sctp/sm_statefuns.c | 8 +-
net/sunrpc/clnt.c | 6 +-
net/sunrpc/sched.c | 22 +-
net/sunrpc/sysfs.c | 55 ++-
net/sunrpc/xprt.c | 10 +
net/sunrpc/xprtrdma/transport.c | 8 +-
net/sunrpc/xprtsock.c | 56 ++-
net/tipc/socket.c | 3 +-
net/unix/af_unix.c | 16 +-
net/vmw_vsock/virtio_transport.c | 11 +-
net/x25/af_x25.c | 11 +-
net/xdp/xsk.c | 69 ++-
net/xdp/xsk_buff_pool.c | 8 +-
net/xfrm/xfrm_interface.c | 5 +-
samples/bpf/xdpsock_user.c | 5 +-
samples/landlock/sandboxer.c | 1 +
scripts/atomic/fallbacks/read_acquire | 11 +-
scripts/atomic/fallbacks/set_release | 7 +-
scripts/dtc/Makefile | 2 +-
scripts/gcc-plugins/stackleak_plugin.c | 25 +-
scripts/mod/modpost.c | 2 +-
security/integrity/evm/evm_main.c | 2 +-
security/keys/keyctl_pkey.c | 14 +-
security/keys/trusted-keys/trusted_core.c | 6 +-
security/landlock/syscalls.c | 2 +-
security/security.c | 24 +-
security/selinux/hooks.c | 180 +++++---
security/selinux/include/policycap.h | 1 +
security/selinux/include/policycap_names.h | 3 +-
security/selinux/include/security.h | 7 +
security/selinux/selinuxfs.c | 2 +
security/selinux/xfrm.c | 2 +-
security/smack/smack_lsm.c | 2 +-
security/tomoyo/load_policy.c | 4 +-
sound/core/pcm.c | 1 +
sound/core/pcm_lib.c | 9 +-
sound/core/pcm_native.c | 39 +-
sound/firewire/fcp.c | 4 +-
sound/isa/cs423x/cs4236.c | 8 +-
sound/pci/hda/hda_intel.c | 10 +-
sound/pci/hda/patch_hdmi.c | 8 +-
sound/pci/hda/patch_realtek.c | 15 +-
sound/soc/amd/acp/acp-mach-common.c | 2 +
sound/soc/amd/vangogh/acp5x-mach.c | 1 +
sound/soc/amd/vangogh/acp5x-pcm-dma.c | 68 +--
sound/soc/atmel/atmel_ssc_dai.c | 5 +-
sound/soc/atmel/mikroe-proto.c | 20 +-
sound/soc/atmel/sam9g20_wm8731.c | 1 +
sound/soc/atmel/sam9x5_wm8731.c | 13 +-
sound/soc/codecs/Kconfig | 5 +
sound/soc/codecs/cs35l41.c | 6 +-
sound/soc/codecs/cs42l42.c | 14 +-
sound/soc/codecs/lpass-rx-macro.c | 14 +-
sound/soc/codecs/lpass-tx-macro.c | 2 +
sound/soc/codecs/lpass-va-macro.c | 4 +-
sound/soc/codecs/lpass-wsa-macro.c | 2 +
sound/soc/codecs/max98927.c | 1 +
sound/soc/codecs/msm8916-wcd-analog.c | 22 +-
sound/soc/codecs/msm8916-wcd-digital.c | 5 +-
sound/soc/codecs/mt6358.c | 4 +
sound/soc/codecs/rk817_codec.c | 6 +-
sound/soc/codecs/rt5663.c | 2 +
sound/soc/codecs/rt5682s.c | 26 +-
sound/soc/codecs/rt5682s.h | 1 -
sound/soc/codecs/wcd934x.c | 12 +-
sound/soc/codecs/wcd938x.c | 10 +-
sound/soc/codecs/wm8350.c | 28 +-
sound/soc/dwc/dwc-i2s.c | 17 +-
sound/soc/fsl/fsl_spdif.c | 2 +
sound/soc/fsl/imx-es8328.c | 1 +
sound/soc/generic/simple-card-utils.c | 15 +
sound/soc/intel/boards/sof_es8336.c | 63 ++-
sound/soc/intel/boards/sof_sdw.c | 2 +-
sound/soc/intel/common/soc-acpi-intel-bxt-match.c | 7 +-
sound/soc/intel/common/soc-acpi-intel-cml-match.c | 7 +-
sound/soc/intel/common/soc-acpi-intel-glk-match.c | 7 +-
sound/soc/intel/common/soc-acpi-intel-jsl-match.c | 7 +-
sound/soc/intel/common/soc-acpi-intel-tgl-match.c | 7 +-
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 7 +-
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 7 +-
.../mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c | 23 +-
sound/soc/mxs/mxs-saif.c | 5 +-
sound/soc/mxs/mxs-sgtl5000.c | 3 +
sound/soc/rockchip/rockchip_i2s.c | 15 +-
sound/soc/rockchip/rockchip_i2s_tdm.c | 12 +-
sound/soc/sh/fsi.c | 19 +-
sound/soc/sh/rz-ssi.c | 73 ++--
sound/soc/soc-compress.c | 5 +
sound/soc/soc-core.c | 2 +-
sound/soc/soc-generic-dmaengine-pcm.c | 6 +-
sound/soc/soc-topology.c | 3 +-
sound/soc/sof/imx/imx8m.c | 1 +
sound/soc/sof/intel/Kconfig | 1 +
sound/soc/sof/intel/hda-dai.c | 13 +
sound/soc/sof/intel/hda-loader.c | 11 +-
sound/soc/sof/intel/hda-pcm.c | 1 +
sound/soc/sof/intel/hda.c | 15 +-
sound/soc/ti/davinci-i2s.c | 5 +-
sound/soc/xilinx/xlnx_formatter_pcm.c | 25 ++
sound/spi/at73c213.c | 27 +-
tools/bpf/bpftool/btf.c | 2 +-
tools/bpf/bpftool/gen.c | 2 +-
tools/bpf/bpftool/link.c | 3 +-
tools/bpf/bpftool/map.c | 15 +-
tools/bpf/bpftool/pids.c | 3 +-
tools/bpf/bpftool/prog.c | 2 +-
tools/include/uapi/linux/bpf.h | 4 +-
tools/lib/bpf/btf.h | 22 +-
tools/lib/bpf/btf_dump.c | 11 +-
tools/lib/bpf/libbpf.c | 3 +
tools/lib/bpf/netlink.c | 63 ++-
tools/lib/bpf/xsk.c | 11 +
tools/perf/builtin-stat.c | 2 +-
tools/perf/pmu-events/arch/x86/skylakex/cache.json | 111 ++---
.../arch/x86/skylakex/floating-point.json | 24 +-
.../pmu-events/arch/x86/skylakex/frontend.json | 18 +-
.../perf/pmu-events/arch/x86/skylakex/memory.json | 96 ++---
.../pmu-events/arch/x86/skylakex/pipeline.json | 11 +
.../pmu-events/arch/x86/skylakex/skx-metrics.json | 461 ++++++++++++++++++---
.../pmu-events/arch/x86/skylakex/uncore-other.json | 23 +
tools/testing/cxl/test/cxl.c | 2 +-
tools/testing/selftests/bpf/prog_tests/bind_perm.c | 20 +-
tools/testing/selftests/bpf/progs/bpf_misc.h | 19 +
.../testing/selftests/bpf/progs/test_probe_user.c | 15 +-
.../testing/selftests/bpf/progs/test_sock_fields.c | 2 +-
tools/testing/selftests/bpf/test_lirc_mode2.sh | 5 +-
tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 10 +-
.../selftests/bpf/test_xdp_redirect_multi.sh | 60 +--
tools/testing/selftests/bpf/xdpxceiver.c | 5 +-
tools/testing/selftests/lkdtm/config | 1 +
.../testing/selftests/net/af_unix/test_unix_oob.c | 6 +-
tools/testing/selftests/net/mptcp/mptcp_connect.sh | 19 +
.../testing/selftests/net/test_vxlan_under_vrf.sh | 8 +-
tools/testing/selftests/net/timestamping.c | 4 +-
tools/testing/selftests/net/tls.c | 6 +
tools/testing/selftests/rcutorture/bin/torture.sh | 4 +-
tools/testing/selftests/sgx/Makefile | 2 +-
tools/testing/selftests/vm/Makefile | 12 +-
tools/testing/selftests/x86/Makefile | 6 +-
tools/testing/selftests/x86/check_cc.sh | 2 +-
tools/virtio/virtio_test.c | 1 +
virt/kvm/kvm_main.c | 13 +
1061 files changed, 11357 insertions(+), 5917 deletions(-)

2022-04-05 22:29:34

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0096/1017] qed: validate and restrict untrusted VFs vlan promisc mode

From: Manish Chopra <[email protected]>

commit cbcc44db2cf7b836896733acc0e5ea966136ed22 upstream.

Today when VFs are put in promiscuous mode, they can request PF
to configure device for them to receive all VLANs traffic regardless
of what vlan is configured by the PF (via ip link) and PF allows this
config request regardless of whether VF is trusted or not.

>From security POV, when VLAN is configured for VF through PF (via ip link),
honour such config requests from VF only when they are configured to be
trusted, otherwise restrict such VFs vlan promisc mode config.

Cc: [email protected]
Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 28 ++++++++++++++++++++++++++--
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 1 +
2 files changed, 27 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -2984,12 +2984,16 @@ static int qed_iov_pre_update_vport(stru
u8 mask = QED_ACCEPT_UCAST_UNMATCHED | QED_ACCEPT_MCAST_UNMATCHED;
struct qed_filter_accept_flags *flags = &params->accept_flags;
struct qed_public_vf_info *vf_info;
+ u16 tlv_mask;
+
+ tlv_mask = BIT(QED_IOV_VP_UPDATE_ACCEPT_PARAM) |
+ BIT(QED_IOV_VP_UPDATE_ACCEPT_ANY_VLAN);

/* Untrusted VFs can't even be trusted to know that fact.
* Simply indicate everything is configured fine, and trace
* configuration 'behind their back'.
*/
- if (!(*tlvs & BIT(QED_IOV_VP_UPDATE_ACCEPT_PARAM)))
+ if (!(*tlvs & tlv_mask))
return 0;

vf_info = qed_iov_get_public_vf_info(hwfn, vfid, true);
@@ -3006,6 +3010,13 @@ static int qed_iov_pre_update_vport(stru
flags->tx_accept_filter &= ~mask;
}

+ if (params->update_accept_any_vlan_flg) {
+ vf_info->accept_any_vlan = params->accept_any_vlan;
+
+ if (vf_info->forced_vlan && !vf_info->is_trusted_configured)
+ params->accept_any_vlan = false;
+ }
+
return 0;
}

@@ -5150,6 +5161,12 @@ static void qed_iov_handle_trust_change(

params.update_ctl_frame_check = 1;
params.mac_chk_en = !vf_info->is_trusted_configured;
+ params.update_accept_any_vlan_flg = 0;
+
+ if (vf_info->accept_any_vlan && vf_info->forced_vlan) {
+ params.update_accept_any_vlan_flg = 1;
+ params.accept_any_vlan = vf_info->accept_any_vlan;
+ }

if (vf_info->rx_accept_mode & mask) {
flags->update_rx_mode_config = 1;
@@ -5165,13 +5182,20 @@ static void qed_iov_handle_trust_change(
if (!vf_info->is_trusted_configured) {
flags->rx_accept_filter &= ~mask;
flags->tx_accept_filter &= ~mask;
+ params.accept_any_vlan = false;
}

if (flags->update_rx_mode_config ||
flags->update_tx_mode_config ||
- params.update_ctl_frame_check)
+ params.update_ctl_frame_check ||
+ params.update_accept_any_vlan_flg) {
+ DP_VERBOSE(hwfn, QED_MSG_IOV,
+ "vport update config for %s VF[abs 0x%x rel 0x%x]\n",
+ vf_info->is_trusted_configured ? "trusted" : "untrusted",
+ vf->abs_vf_id, vf->relative_vf_id);
qed_sp_vport_update(hwfn, &params,
QED_SPQ_MODE_EBLOCK, NULL);
+ }
}
}

--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
@@ -62,6 +62,7 @@ struct qed_public_vf_info {
bool is_trusted_request;
u8 rx_accept_mode;
u8 tx_accept_mode;
+ bool accept_any_vlan;
};

struct qed_iov_vf_init_params {

2022-04-05 22:29:52

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0860/1017] KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU

From: Sean Christopherson <[email protected]>

commit d62007edf01f5c11f75d0f4b1e538fc52a5b1982 upstream.

Zap both valid and invalid roots when zapping/unmapping a gfn range, as
KVM must ensure it holds no references to the freed page after returning
from the unmap operation. Most notably, the TDP MMU doesn't zap invalid
roots in mmu_notifier callbacks. This leads to use-after-free and other
issues if the mmu_notifier runs to completion while an invalid root
zapper yields as KVM fails to honor the requirement that there must be
_no_ references to the page after the mmu_notifier returns.

The bug is most easily reproduced by hacking KVM to cause a collision
between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug
exists between kvm_mmu_notifier_invalidate_range_start() and memslot
updates as well. Invalidating a root ensures pages aren't accessible by
the guest, and KVM won't read or write page data itself, but KVM will
trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing
a zap of an invalid root _after_ the mmu_notifier returns is fatal.

WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm]
RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm]
Call Trace:
<TASK>
kvm_set_pfn_dirty+0xa8/0xe0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
zap_gfn_range+0x1f3/0x310 [kvm]
kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm]
kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm]
set_nx_huge_pages+0xb4/0x190 [kvm]
param_attr_store+0x70/0x100
module_attr_store+0x19/0x30
kernfs_fop_write_iter+0x119/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1cc/0x270
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>

Fixes: b7cccd397f31 ("KVM: x86/mmu: Fast invalidation for TDP MMU")
Cc: [email protected]
Cc: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/tdp_mmu.c | 39 ++++++++++++++++++++++++---------------
1 file changed, 24 insertions(+), 15 deletions(-)

--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -99,15 +99,18 @@ void kvm_tdp_mmu_put_root(struct kvm *kv
}

/*
- * Finds the next valid root after root (or the first valid root if root
- * is NULL), takes a reference on it, and returns that next root. If root
- * is not NULL, this thread should have already taken a reference on it, and
- * that reference will be dropped. If no valid root is found, this
- * function will return NULL.
+ * Returns the next root after @prev_root (or the first root if @prev_root is
+ * NULL). A reference to the returned root is acquired, and the reference to
+ * @prev_root is released (the caller obviously must hold a reference to
+ * @prev_root if it's non-NULL).
+ *
+ * If @only_valid is true, invalid roots are skipped.
+ *
+ * Returns NULL if the end of tdp_mmu_roots was reached.
*/
static struct kvm_mmu_page *tdp_mmu_next_root(struct kvm *kvm,
struct kvm_mmu_page *prev_root,
- bool shared)
+ bool shared, bool only_valid)
{
struct kvm_mmu_page *next_root;

@@ -122,7 +125,7 @@ static struct kvm_mmu_page *tdp_mmu_next
typeof(*next_root), link);

while (next_root) {
- if (!next_root->role.invalid &&
+ if ((!only_valid || !next_root->role.invalid) &&
kvm_tdp_mmu_get_root(kvm, next_root))
break;

@@ -148,13 +151,19 @@ static struct kvm_mmu_page *tdp_mmu_next
* mode. In the unlikely event that this thread must free a root, the lock
* will be temporarily dropped and reacquired in write mode.
*/
-#define for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared) \
- for (_root = tdp_mmu_next_root(_kvm, NULL, _shared); \
- _root; \
- _root = tdp_mmu_next_root(_kvm, _root, _shared)) \
- if (kvm_mmu_page_as_id(_root) != _as_id) { \
+#define __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, _only_valid)\
+ for (_root = tdp_mmu_next_root(_kvm, NULL, _shared, _only_valid); \
+ _root; \
+ _root = tdp_mmu_next_root(_kvm, _root, _shared, _only_valid)) \
+ if (kvm_mmu_page_as_id(_root) != _as_id) { \
} else

+#define for_each_valid_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared) \
+ __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, true)
+
+#define for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared) \
+ __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, false)
+
#define for_each_tdp_mmu_root(_kvm, _root, _as_id) \
list_for_each_entry_rcu(_root, &_kvm->arch.tdp_mmu_roots, link, \
lockdep_is_held_type(&kvm->mmu_lock, 0) || \
@@ -1224,7 +1233,7 @@ bool kvm_tdp_mmu_wrprot_slot(struct kvm

lockdep_assert_held_read(&kvm->mmu_lock);

- for_each_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+ for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
spte_set |= wrprot_gfn_range(kvm, root, slot->base_gfn,
slot->base_gfn + slot->npages, min_level);

@@ -1294,7 +1303,7 @@ bool kvm_tdp_mmu_clear_dirty_slot(struct

lockdep_assert_held_read(&kvm->mmu_lock);

- for_each_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+ for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
spte_set |= clear_dirty_gfn_range(kvm, root, slot->base_gfn,
slot->base_gfn + slot->npages);

@@ -1419,7 +1428,7 @@ void kvm_tdp_mmu_zap_collapsible_sptes(s

lockdep_assert_held_read(&kvm->mmu_lock);

- for_each_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+ for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
zap_collapsible_spte_range(kvm, root, slot);
}

2022-04-05 22:30:11

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0803/1017] media: staging: media: zoran: move videodev alloc

From: Corentin Labbe <[email protected]>

[ Upstream commit 82e3a496eb56da0b9f29fdc5b63cedb3289e91de ]

Move some code out of zr36057_init() and create new functions for handling
zr->video_dev. This permit to ease code reading and fix a zr->video_dev
memory leak.

Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/zoran/zoran.h | 2 +-
drivers/staging/media/zoran/zoran_card.c | 80 ++++++++++++++--------
drivers/staging/media/zoran/zoran_driver.c | 5 +-
3 files changed, 54 insertions(+), 33 deletions(-)

diff --git a/drivers/staging/media/zoran/zoran.h b/drivers/staging/media/zoran/zoran.h
index b1ad2a2b914c..50d5a7acfab6 100644
--- a/drivers/staging/media/zoran/zoran.h
+++ b/drivers/staging/media/zoran/zoran.h
@@ -313,6 +313,6 @@ static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev)

#endif

-int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq);
+int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir);
void zoran_queue_exit(struct zoran *zr);
int zr_set_buf(struct zoran *zr);
diff --git a/drivers/staging/media/zoran/zoran_card.c b/drivers/staging/media/zoran/zoran_card.c
index c578ef3c32f5..a83314b16548 100644
--- a/drivers/staging/media/zoran/zoran_card.c
+++ b/drivers/staging/media/zoran/zoran_card.c
@@ -803,6 +803,52 @@ int zoran_check_jpg_settings(struct zoran *zr,
return 0;
}

+static int zoran_init_video_device(struct zoran *zr, struct video_device *video_dev, int dir)
+{
+ int err;
+
+ /* Now add the template and register the device unit. */
+ *video_dev = zoran_template;
+ video_dev->v4l2_dev = &zr->v4l2_dev;
+ video_dev->lock = &zr->lock;
+ video_dev->device_caps = V4L2_CAP_STREAMING | dir;
+
+ strscpy(video_dev->name, ZR_DEVNAME(zr), sizeof(video_dev->name));
+ /*
+ * It's not a mem2mem device, but you can both capture and output from one and the same
+ * device. This should really be split up into two device nodes, but that's a job for
+ * another day.
+ */
+ video_dev->vfl_dir = VFL_DIR_M2M;
+ zoran_queue_init(zr, &zr->vq, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+ err = video_register_device(video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]);
+ if (err < 0)
+ return err;
+ video_set_drvdata(video_dev, zr);
+ return 0;
+}
+
+static void zoran_exit_video_devices(struct zoran *zr)
+{
+ video_unregister_device(zr->video_dev);
+ kfree(zr->video_dev);
+}
+
+static int zoran_init_video_devices(struct zoran *zr)
+{
+ int err;
+
+ zr->video_dev = video_device_alloc();
+ if (!zr->video_dev)
+ return -ENOMEM;
+
+ err = zoran_init_video_device(zr, zr->video_dev, V4L2_CAP_VIDEO_CAPTURE);
+ if (err)
+ kfree(zr->video_dev);
+ return err;
+}
+
void zoran_open_init_params(struct zoran *zr)
{
int i;
@@ -874,17 +920,11 @@ static int zr36057_init(struct zoran *zr)
zoran_open_init_params(zr);

/* allocate memory *before* doing anything to the hardware in case allocation fails */
- zr->video_dev = video_device_alloc();
- if (!zr->video_dev) {
- err = -ENOMEM;
- goto exit;
- }
zr->stat_com = dma_alloc_coherent(&zr->pci_dev->dev,
BUZ_NUM_STAT_COM * sizeof(u32),
&zr->p_sc, GFP_KERNEL);
if (!zr->stat_com) {
- err = -ENOMEM;
- goto exit_video;
+ return -ENOMEM;
}
for (j = 0; j < BUZ_NUM_STAT_COM; j++)
zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */
@@ -897,26 +937,9 @@ static int zr36057_init(struct zoran *zr)
goto exit_statcom;
}

- /* Now add the template and register the device unit. */
- *zr->video_dev = zoran_template;
- zr->video_dev->v4l2_dev = &zr->v4l2_dev;
- zr->video_dev->lock = &zr->lock;
- zr->video_dev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
-
- strscpy(zr->video_dev->name, ZR_DEVNAME(zr), sizeof(zr->video_dev->name));
- /*
- * It's not a mem2mem device, but you can both capture and output from one and the same
- * device. This should really be split up into two device nodes, but that's a job for
- * another day.
- */
- zr->video_dev->vfl_dir = VFL_DIR_M2M;
-
- zoran_queue_init(zr, &zr->vq);
-
- err = video_register_device(zr->video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]);
- if (err < 0)
+ err = zoran_init_video_devices(zr);
+ if (err)
goto exit_statcomb;
- video_set_drvdata(zr->video_dev, zr);

zoran_init_hardware(zr);
if (!pass_through) {
@@ -931,9 +954,6 @@ static int zr36057_init(struct zoran *zr)
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, zr->stat_comb, zr->p_scb);
exit_statcom:
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32), zr->stat_com, zr->p_sc);
-exit_video:
- kfree(zr->video_dev);
-exit:
return err;
}

@@ -965,7 +985,7 @@ static void zoran_remove(struct pci_dev *pdev)
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, zr->stat_comb, zr->p_scb);
pci_release_regions(pdev);
pci_disable_device(zr->pci_dev);
- video_unregister_device(zr->video_dev);
+ zoran_exit_video_devices(zr);
exit_free:
v4l2_ctrl_handler_free(&zr->hdl);
v4l2_device_unregister(&zr->v4l2_dev);
diff --git a/drivers/staging/media/zoran/zoran_driver.c b/drivers/staging/media/zoran/zoran_driver.c
index 46382e43f1bf..551db338c7f7 100644
--- a/drivers/staging/media/zoran/zoran_driver.c
+++ b/drivers/staging/media/zoran/zoran_driver.c
@@ -1008,7 +1008,7 @@ static const struct vb2_ops zr_video_qops = {
.wait_finish = vb2_ops_wait_finish,
};

-int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)
+int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir)
{
int err;

@@ -1016,7 +1016,8 @@ int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)
INIT_LIST_HEAD(&zr->queued_bufs);

vq->dev = &zr->pci_dev->dev;
- vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ vq->type = dir;
+
vq->io_modes = VB2_USERPTR | VB2_DMABUF | VB2_MMAP | VB2_READ | VB2_WRITE;
vq->drv_priv = zr;
vq->buf_struct_size = sizeof(struct zr_buffer);
--
2.34.1

2022-04-05 22:30:18

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0536/1017] scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()

From: Damien Le Moal <[email protected]>

[ Upstream commit fd6d0e376211d7ed759db96b0fbd9a1cee67d462 ]

Make sure that the __le32 fields of struct sata_cmd are manipulated after
applying the correct endian conversion. That is, use cpu_to_le32() for
assigning values and le32_to_cpu() for consulting a field value. In
particular, make sure that the calculations for the 4G boundary check are
done using CPU endianness and *not* little endian values. With these fixes,
many sparse warnings are removed.

While at it, fix some code identation and add blank lines after variable
declarations and in some other places to make this code more readable.

Link: https://lore.kernel.org/r/[email protected]
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 82 ++++++++++++++++++--------------
1 file changed, 45 insertions(+), 37 deletions(-)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index e2459bd817a5..93a5af907856 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4548,7 +4548,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
u32 q_index, cpu_id;
struct sata_start_req sata_cmd;
u32 hdr_tag, ncg_tag = 0;
- u64 phys_addr, start_addr, end_addr;
+ u64 phys_addr, end_addr;
u32 end_addr_high, end_addr_low;
u32 ATAP = 0x0;
u32 dir;
@@ -4609,32 +4609,38 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
pm8001_chip_make_sg(task->scatter,
ccb->n_elem, ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
- sata_cmd.enc_addr_low = lower_32_bits(phys_addr);
- sata_cmd.enc_addr_high = upper_32_bits(phys_addr);
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
- sata_cmd.enc_addr_low = lower_32_bits(dma_addr);
- sata_cmd.enc_addr_high = upper_32_bits(dma_addr);
+
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(dma_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
sata_cmd.enc_esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + sata_cmd.enc_len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
- if (end_addr_high != sata_cmd.enc_addr_high) {
+ end_addr = dma_addr + le32_to_cpu(sata_cmd.enc_len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+ if (end_addr_high != le32_to_cpu(sata_cmd.enc_addr_high)) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, sata_cmd.enc_len,
+ dma_addr,
+ le32_to_cpu(sata_cmd.enc_len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
sata_cmd.enc_addr_low =
- lower_32_bits(phys_addr);
+ cpu_to_le32(lower_32_bits(phys_addr));
sata_cmd.enc_addr_high =
- upper_32_bits(phys_addr);
+ cpu_to_le32(upper_32_bits(phys_addr));
sata_cmd.enc_esgl =
cpu_to_le32(1 << 31);
}
@@ -4645,7 +4651,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
sata_cmd.enc_esgl = 0;
}
/* XTS mode. All other fields are 0 */
- sata_cmd.key_index_mode = 0x6 << 4;
+ sata_cmd.key_index_mode = cpu_to_le32(0x6 << 4);
+
/* set tweak values. Should be the start lba */
sata_cmd.twk_val0 =
cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) |
@@ -4671,31 +4678,31 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
phys_addr = ccb->ccb_dma_handle;
sata_cmd.addr_low = lower_32_bits(phys_addr);
sata_cmd.addr_high = upper_32_bits(phys_addr);
- sata_cmd.esgl = cpu_to_le32(1 << 31);
+ sata_cmd.esgl = cpu_to_le32(1U << 31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
+
sata_cmd.addr_low = lower_32_bits(dma_addr);
sata_cmd.addr_high = upper_32_bits(dma_addr);
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
sata_cmd.esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + sata_cmd.len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+ end_addr = dma_addr + le32_to_cpu(sata_cmd.len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
if (end_addr_high != sata_cmd.addr_high) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%xend_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, sata_cmd.len,
+ dma_addr,
+ le32_to_cpu(sata_cmd.len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
- sata_cmd.addr_low =
- lower_32_bits(phys_addr);
- sata_cmd.addr_high =
- upper_32_bits(phys_addr);
- sata_cmd.esgl = cpu_to_le32(1 << 31);
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1U << 31);
}
} else if (task->num_scatter == 0) {
sata_cmd.addr_low = 0;
@@ -4703,27 +4710,28 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
sata_cmd.esgl = 0;
}
+
/* scsi cdb */
sata_cmd.atapi_scsi_cdb[0] =
cpu_to_le32(((task->ata_task.atapi_packet[0]) |
- (task->ata_task.atapi_packet[1] << 8) |
- (task->ata_task.atapi_packet[2] << 16) |
- (task->ata_task.atapi_packet[3] << 24)));
+ (task->ata_task.atapi_packet[1] << 8) |
+ (task->ata_task.atapi_packet[2] << 16) |
+ (task->ata_task.atapi_packet[3] << 24)));
sata_cmd.atapi_scsi_cdb[1] =
cpu_to_le32(((task->ata_task.atapi_packet[4]) |
- (task->ata_task.atapi_packet[5] << 8) |
- (task->ata_task.atapi_packet[6] << 16) |
- (task->ata_task.atapi_packet[7] << 24)));
+ (task->ata_task.atapi_packet[5] << 8) |
+ (task->ata_task.atapi_packet[6] << 16) |
+ (task->ata_task.atapi_packet[7] << 24)));
sata_cmd.atapi_scsi_cdb[2] =
cpu_to_le32(((task->ata_task.atapi_packet[8]) |
- (task->ata_task.atapi_packet[9] << 8) |
- (task->ata_task.atapi_packet[10] << 16) |
- (task->ata_task.atapi_packet[11] << 24)));
+ (task->ata_task.atapi_packet[9] << 8) |
+ (task->ata_task.atapi_packet[10] << 16) |
+ (task->ata_task.atapi_packet[11] << 24)));
sata_cmd.atapi_scsi_cdb[3] =
cpu_to_le32(((task->ata_task.atapi_packet[12]) |
- (task->ata_task.atapi_packet[13] << 8) |
- (task->ata_task.atapi_packet[14] << 16) |
- (task->ata_task.atapi_packet[15] << 24)));
+ (task->ata_task.atapi_packet[13] << 8) |
+ (task->ata_task.atapi_packet[14] << 16) |
+ (task->ata_task.atapi_packet[15] << 24)));
}

/* Check for read log for failed drive and return */
--
2.34.1

2022-04-05 22:30:18

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0206/1017] crypto: sun8i-ss - really disable hash on A80

From: Corentin Labbe <[email protected]>

[ Upstream commit 881fc7fba6c3e7d77d608b9a50b01a89d5e0c61b ]

When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.

Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
index 80e89066dbd1..319fe3279a71 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
@@ -30,6 +30,8 @@
static const struct ss_variant ss_a80_variant = {
.alg_cipher = { SS_ALG_AES, SS_ALG_DES, SS_ALG_3DES,
},
+ .alg_hash = { SS_ID_NOTSUPP, SS_ID_NOTSUPP, SS_ID_NOTSUPP, SS_ID_NOTSUPP,
+ },
.op_mode = { SS_OP_ECB, SS_OP_CBC,
},
.ss_clks = {
--
2.34.1

2022-04-05 22:30:30

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0926/1017] XArray: Update the LRU list in xas_split()

From: Matthew Wilcox (Oracle) <[email protected]>

commit 3ed4bb77156da0bc732847c8c9df92454c1fbeea upstream.

When splitting a value entry, we may need to add the new nodes to the LRU
list and remove the parent node from the LRU list. The WARN_ON checks
in shadow_lru_isolate() catch this oversight. This bug was latent
until we stopped splitting folios in shrink_page_list() with commit
820c4e2e6f51 ("mm/vmscan: Free non-shmem folios without splitting them").
That allows the creation of large shadow entries, and subsequently when
trying to page in a small page, we will split the large shadow entry
in __filemap_add_folio().

Fixes: 8fc75643c5e1 ("XArray: add xas_split")
Reported-by: Hugh Dickins <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/xarray.c | 2 ++
1 file changed, 2 insertions(+)

--- a/lib/xarray.c
+++ b/lib/xarray.c
@@ -1081,6 +1081,7 @@ void xas_split(struct xa_state *xas, voi
xa_mk_node(child));
if (xa_is_value(curr))
values--;
+ xas_update(xas, child);
} else {
unsigned int canon = offset - xas->xa_sibs;

@@ -1095,6 +1096,7 @@ void xas_split(struct xa_state *xas, voi
} while (offset-- > xas->xa_offset);

node->nr_values += values;
+ xas_update(xas, node);
}
EXPORT_SYMBOL_GPL(xas_split);
#endif

2022-04-05 22:30:42

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0173/1017] media: omap3isp: Use struct_group() for memcpy() region

From: Kees Cook <[email protected]>

commit d4568fc8525897e683983806f813be1ae9eedaed upstream.

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields. Wrap the target region
in struct_group(). This additionally fixes a theoretical misalignment
of the copy (since the size of "buf" changes between 64-bit and 32-bit,
but this is likely never built for 64-bit).

FWIW, I think this code is totally broken on 64-bit (which appears to
not be a "real" build configuration): it would either always fail (with
an uninitialized data->buf_size) or would cause corruption in userspace
due to the copy_to_user() in the call path against an uninitialized
data->buf value:

omap3isp_stat_request_statistics_time32(...)
struct omap3isp_stat_data data64;
...
omap3isp_stat_request_statistics(stat, &data64);

int omap3isp_stat_request_statistics(struct ispstat *stat,
struct omap3isp_stat_data *data)
...
buf = isp_stat_buf_get(stat, data);

static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat,
struct omap3isp_stat_data *data)
...
if (buf->buf_size > data->buf_size) {
...
return ERR_PTR(-EINVAL);
}
...
rval = copy_to_user(data->buf,
buf->virt_addr,
buf->buf_size);

Regardless, additionally initialize data64 to be zero-filled to avoid
undefined behavior.

Link: https://lore.kernel.org/lkml/20211215220505.GB21862@embeddedor

Cc: Arnd Bergmann <[email protected]>
Fixes: 378e3f81cb56 ("media: omap3isp: support 64-bit version of omap3isp_stat_data")
Cc: [email protected]
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/omap3isp/ispstat.c | 5 +++--
include/uapi/linux/omap3isp.h | 21 +++++++++++++--------
2 files changed, 16 insertions(+), 10 deletions(-)

--- a/drivers/media/platform/omap3isp/ispstat.c
+++ b/drivers/media/platform/omap3isp/ispstat.c
@@ -512,7 +512,7 @@ int omap3isp_stat_request_statistics(str
int omap3isp_stat_request_statistics_time32(struct ispstat *stat,
struct omap3isp_stat_data_time32 *data)
{
- struct omap3isp_stat_data data64;
+ struct omap3isp_stat_data data64 = { };
int ret;

ret = omap3isp_stat_request_statistics(stat, &data64);
@@ -521,7 +521,8 @@ int omap3isp_stat_request_statistics_tim

data->ts.tv_sec = data64.ts.tv_sec;
data->ts.tv_usec = data64.ts.tv_usec;
- memcpy(&data->buf, &data64.buf, sizeof(*data) - sizeof(data->ts));
+ data->buf = (uintptr_t)data64.buf;
+ memcpy(&data->frame, &data64.frame, sizeof(data->frame));

return 0;
}
--- a/include/uapi/linux/omap3isp.h
+++ b/include/uapi/linux/omap3isp.h
@@ -162,6 +162,7 @@ struct omap3isp_h3a_aewb_config {
* struct omap3isp_stat_data - Statistic data sent to or received from user
* @ts: Timestamp of returned framestats.
* @buf: Pointer to pass to user.
+ * @buf_size: Size of buffer.
* @frame_number: Frame number of requested stats.
* @cur_frame: Current frame number being processed.
* @config_counter: Number of the configuration associated with the data.
@@ -176,10 +177,12 @@ struct omap3isp_stat_data {
struct timeval ts;
#endif
void __user *buf;
- __u32 buf_size;
- __u16 frame_number;
- __u16 cur_frame;
- __u16 config_counter;
+ __struct_group(/* no tag */, frame, /* no attrs */,
+ __u32 buf_size;
+ __u16 frame_number;
+ __u16 cur_frame;
+ __u16 config_counter;
+ );
};

#ifdef __KERNEL__
@@ -189,10 +192,12 @@ struct omap3isp_stat_data_time32 {
__s32 tv_usec;
} ts;
__u32 buf;
- __u32 buf_size;
- __u16 frame_number;
- __u16 cur_frame;
- __u16 config_counter;
+ __struct_group(/* no tag */, frame, /* no attrs */,
+ __u32 buf_size;
+ __u16 frame_number;
+ __u16 cur_frame;
+ __u16 config_counter;
+ );
};
#endif

2022-04-05 22:31:03

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0736/1017] NFS: Dont loop forever in nfs_do_recoalesce()

From: Trond Myklebust <[email protected]>

[ Upstream commit d02d81efc7564b4d5446a02e0214a164cf00b1f3 ]

If __nfs_pageio_add_request() fails to add the request, it will return
with either desc->pg_error < 0, or mirror->pg_recoalesce will be set, so
we are guaranteed either to exit the function altogether, or to loop.

However if there is nothing left in mirror->pg_list to coalesce, we must
exit, so make sure that we clear mirror->pg_recoalesce every time we
loop.

Reported-by: Olga Kornievskaia <[email protected]>
Fixes: 70536bf4eb07 ("NFS: Clean up reset of the mirror accounting variables")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/pagelist.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index ad7f83dc9a2d..815d63080245 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1218,6 +1218,7 @@ static int nfs_do_recoalesce(struct nfs_pageio_descriptor *desc)

do {
list_splice_init(&mirror->pg_list, &head);
+ mirror->pg_recoalesce = 0;

while (!list_empty(&head)) {
struct nfs_page *req;
--
2.34.1

2022-04-05 22:31:23

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0176/1017] media: venus: venc: Fix h264 8x8 transform control

From: Stanimir Varbanov <[email protected]>

commit 61b3317dd424a3488b6754d7ff8301944d9d17d7 upstream.

During encoder driver open controls are initialized via a call
to v4l2_ctrl_handler_setup which returns EINVAL error for
V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM v4l2 control. The control
default value is disabled and because of firmware limitations
8x8 transform cannot be disabled for the supported HIGH and
CONSTRAINED_HIGH profiles.

To fix the issue change the control default value to enabled
(this is fine because the firmware enables 8x8 transform for
high and constrained_high profiles by default). Also, correct
the checking of profile ids in s_ctrl from hfi to v4l2 ids.

cc: [email protected] # 5.15+
Fixes: bfee75f73c37 ("media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control")
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/qcom/venus/venc.c | 4 ++--
drivers/media/platform/qcom/venus/venc_ctrls.c | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/media/platform/qcom/venus/venc.c
+++ b/drivers/media/platform/qcom/venus/venc.c
@@ -662,8 +662,8 @@ static int venc_set_properties(struct ve

ptype = HFI_PROPERTY_PARAM_VENC_H264_TRANSFORM_8X8;
h264_transform.enable_type = 0;
- if (ctr->profile.h264 == HFI_H264_PROFILE_HIGH ||
- ctr->profile.h264 == HFI_H264_PROFILE_CONSTRAINED_HIGH)
+ if (ctr->profile.h264 == V4L2_MPEG_VIDEO_H264_PROFILE_HIGH ||
+ ctr->profile.h264 == V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH)
h264_transform.enable_type = ctr->h264_8x8_transform;

ret = hfi_session_set_property(inst, ptype, &h264_transform);
--- a/drivers/media/platform/qcom/venus/venc_ctrls.c
+++ b/drivers/media/platform/qcom/venus/venc_ctrls.c
@@ -320,8 +320,8 @@ static int venc_op_s_ctrl(struct v4l2_ct
ctr->intra_refresh_period = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:
- if (ctr->profile.h264 != HFI_H264_PROFILE_HIGH &&
- ctr->profile.h264 != HFI_H264_PROFILE_CONSTRAINED_HIGH)
+ if (ctr->profile.h264 != V4L2_MPEG_VIDEO_H264_PROFILE_HIGH &&
+ ctr->profile.h264 != V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH)
return -EINVAL;

/*
@@ -457,7 +457,7 @@ int venc_ctrl_init(struct venus_inst *in
V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP, 1, 51, 1, 1);

v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
- V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM, 0, 1, 1, 0);
+ V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM, 0, 1, 1, 1);

v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP, 1, 51, 1, 1);

2022-04-05 22:33:15

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0442/1017] igc: dont reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

From: Alexander Lobakin <[email protected]>

[ Upstream commit f9e61d365bafdee40fe2586fc6be490c3e824dad ]

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, igc_construct_skb_zc() currently allocates and reserves
additional `xdp->data_meta - xdp->data_hard_start`, which is about
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only (+ meta) to
__napi_alloc_skb() and don't reserve anything. This will give
enough headroom for stack processing.
Also, net_prefetch() xdp->data_meta and align the copy size to
speed-up memcpy() a little and better match igc_construct_skb().

Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Tested-by: Nechama Kraus <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igc/igc_main.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index d83e665b3a4f..a156738dc9b6 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -2435,19 +2435,20 @@ static int igc_clean_rx_irq(struct igc_q_vector *q_vector, const int budget)
static struct sk_buff *igc_construct_skb_zc(struct igc_ring *ring,
struct xdp_buff *xdp)
{
+ unsigned int totalsize = xdp->data_end - xdp->data_meta;
unsigned int metasize = xdp->data - xdp->data_meta;
- unsigned int datasize = xdp->data_end - xdp->data;
- unsigned int totalsize = metasize + datasize;
struct sk_buff *skb;

- skb = __napi_alloc_skb(&ring->q_vector->napi,
- xdp->data_end - xdp->data_hard_start,
+ net_prefetch(xdp->data_meta);
+
+ skb = __napi_alloc_skb(&ring->q_vector->napi, totalsize,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
return NULL;

- skb_reserve(skb, xdp->data_meta - xdp->data_hard_start);
- memcpy(__skb_put(skb, totalsize), xdp->data_meta, totalsize);
+ memcpy(__skb_put(skb, totalsize), xdp->data_meta,
+ ALIGN(totalsize, sizeof(long)));
+
if (metasize) {
skb_metadata_set(skb, metasize);
__skb_pull(skb, metasize);
--
2.34.1

2022-04-05 22:33:18

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0183/1017] xtensa: define update_mmu_tlb function

From: Max Filippov <[email protected]>

commit 1c4664faa38923330d478f046dc743a00c1e2dec upstream.

Before the commit f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault()
codepaths") there was a call to update_mmu_cache in alloc_set_pte that
used to invalidate TLB entry caching invalid PTE that caused a page
fault. That commit removed that call so now invalid TLB entry survives
causing repetitive page faults on the CPU that took the initial fault
until that TLB entry is occasionally evicted. This issue is spotted by
the xtensa TLB sanity checker.

Fix this issue by defining update_mmu_tlb function that flushes TLB entry
for the faulting address.

Cc: [email protected] # 5.12+
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/include/asm/pgtable.h | 4 ++++
arch/xtensa/mm/tlb.c | 6 ++++++
2 files changed, 10 insertions(+)

--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -411,6 +411,10 @@ extern void update_mmu_cache(struct vm_

typedef pte_t *pte_addr_t;

+void update_mmu_tlb(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep);
+#define __HAVE_ARCH_UPDATE_MMU_TLB
+
#endif /* !defined (__ASSEMBLY__) */

#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
--- a/arch/xtensa/mm/tlb.c
+++ b/arch/xtensa/mm/tlb.c
@@ -162,6 +162,12 @@ void local_flush_tlb_kernel_range(unsign
}
}

+void update_mmu_tlb(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep)
+{
+ local_flush_tlb_page(vma, address);
+}
+
#ifdef CONFIG_DEBUG_TLB_SANITY

static unsigned get_pte_for_vaddr(unsigned vaddr)

2022-04-05 22:33:16

by Greg Kroah-Hartman

Subject: [PATCH 5.16 0993/1017] perf vendor events: Update metrics for SkyLake Server

From: Ian Rogers <[email protected]>

commit 3bad20d7d129c3b3063658a0f83974dfe6dac5c4 upstream.

Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 1.26:
https://download.01.org/perfmon/SKX
Json files generated by:
https://github.com/intel/event-converter-for-linux-perf

Fixes were made that allow the skx-metrics.json to successfully
generate, bringing back TopdownL1 metrics.

Tested:

$ perf test
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : Skip
91: perf all PMU test : Ok
...

90 skips due to a lack of floating point samples, which is
understandable.

Fixes: c4ad8fabd03f76ed ("perf vendor events: Update metrics for SkyLake Server")
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Zhengjun Xing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/pmu-events/arch/x86/skylakex/cache.json | 111 +-
tools/perf/pmu-events/arch/x86/skylakex/floating-point.json | 24
tools/perf/pmu-events/arch/x86/skylakex/frontend.json | 18
tools/perf/pmu-events/arch/x86/skylakex/memory.json | 96 +-
tools/perf/pmu-events/arch/x86/skylakex/pipeline.json | 11
tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json | 461 ++++++++++--
tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json | 23
7 files changed, 591 insertions(+), 153 deletions(-)

--- a/tools/perf/pmu-events/arch/x86/skylakex/cache.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/cache.json
@@ -315,6 +315,19 @@
"UMask": "0x82"
},
{
+ "BriefDescription": "All retired memory instructions.",
+ "Counter": "0,1,2,3",
+ "CounterHTOff": "0,1,2,3",
+ "Data_LA": "1",
+ "EventCode": "0xD0",
+ "EventName": "MEM_INST_RETIRED.ANY",
+ "L1_Hit_Indication": "1",
+ "PEBS": "1",
+ "PublicDescription": "Counts all retired memory instructions - loads and stores.",
+ "SampleAfterValue": "2000003",
+ "UMask": "0x83"
+ },
+ {
"BriefDescription": "Retired load instructions with locked access.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3",
@@ -358,6 +371,7 @@
"EventCode": "0xD0",
"EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
"PEBS": "1",
+ "PublicDescription": "Number of retired load instructions that (start a) miss in the 2nd-level TLB (STLB).",
"SampleAfterValue": "100003",
"UMask": "0x11"
},
@@ -370,6 +384,7 @@
"EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
"L1_Hit_Indication": "1",
"PEBS": "1",
+ "PublicDescription": "Number of retired store instructions that (start a) miss in the 2nd-level TLB (STLB).",
"SampleAfterValue": "100003",
"UMask": "0x12"
},
@@ -733,7 +748,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010491",
+ "MSRValue": "0x10491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -772,7 +787,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0491",
+ "MSRValue": "0x4003C0491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -785,7 +800,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0491",
+ "MSRValue": "0x1003C0491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -798,7 +813,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0491",
+ "MSRValue": "0x8003C0491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -811,7 +826,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010490",
+ "MSRValue": "0x10490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -850,7 +865,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0490",
+ "MSRValue": "0x4003C0490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -863,7 +878,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0490",
+ "MSRValue": "0x1003C0490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -876,7 +891,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0490",
+ "MSRValue": "0x8003C0490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -889,7 +904,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010120",
+ "MSRValue": "0x10120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -928,7 +943,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0120",
+ "MSRValue": "0x4003C0120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -941,7 +956,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0120",
+ "MSRValue": "0x1003C0120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -954,7 +969,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0120",
+ "MSRValue": "0x8003C0120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -967,7 +982,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010122",
+ "MSRValue": "0x10122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1006,7 +1021,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0122",
+ "MSRValue": "0x4003C0122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1019,7 +1034,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0122",
+ "MSRValue": "0x1003C0122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1032,7 +1047,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0122",
+ "MSRValue": "0x8003C0122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1045,7 +1060,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010004",
+ "MSRValue": "0x10004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1084,7 +1099,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0004",
+ "MSRValue": "0x4003C0004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1097,7 +1112,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0004",
+ "MSRValue": "0x1003C0004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1110,7 +1125,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0004",
+ "MSRValue": "0x8003C0004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1123,7 +1138,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010001",
+ "MSRValue": "0x10001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1162,7 +1177,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0001",
+ "MSRValue": "0x4003C0001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1175,7 +1190,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0001",
+ "MSRValue": "0x1003C0001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1188,7 +1203,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0001",
+ "MSRValue": "0x8003C0001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1201,7 +1216,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010002",
+ "MSRValue": "0x10002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1240,7 +1255,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0002",
+ "MSRValue": "0x4003C0002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1253,7 +1268,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0002",
+ "MSRValue": "0x1003C0002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1266,7 +1281,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0002",
+ "MSRValue": "0x8003C0002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1279,7 +1294,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010400",
+ "MSRValue": "0x10400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1318,7 +1333,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0400",
+ "MSRValue": "0x4003C0400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1331,7 +1346,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0400",
+ "MSRValue": "0x1003C0400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1344,7 +1359,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0400",
+ "MSRValue": "0x8003C0400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1357,7 +1372,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010010",
+ "MSRValue": "0x10010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1396,7 +1411,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0010",
+ "MSRValue": "0x4003C0010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1409,7 +1424,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0010",
+ "MSRValue": "0x1003C0010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1422,7 +1437,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0010",
+ "MSRValue": "0x8003C0010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1435,7 +1450,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010020",
+ "MSRValue": "0x10020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1474,7 +1489,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0020",
+ "MSRValue": "0x4003C0020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1487,7 +1502,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0020",
+ "MSRValue": "0x1003C0020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1500,7 +1515,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0020",
+ "MSRValue": "0x8003C0020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1513,7 +1528,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010080",
+ "MSRValue": "0x10080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1552,7 +1567,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0080",
+ "MSRValue": "0x4003C0080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1565,7 +1580,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0080",
+ "MSRValue": "0x1003C0080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1578,7 +1593,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0080",
+ "MSRValue": "0x8003C0080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1591,7 +1606,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010100",
+ "MSRValue": "0x10100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1630,7 +1645,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0100",
+ "MSRValue": "0x4003C0100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1643,7 +1658,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0100",
+ "MSRValue": "0x1003C0100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1656,7 +1671,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0100",
+ "MSRValue": "0x8003C0100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
--- a/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
@@ -1,73 +1,81 @@
[
{
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT14 RCP14 DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD 128-bit packed computational double precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
+ "PublicDescription": "Counts once for most SIMD 128-bit packed computational double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x4"
},
{
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD 128-bit packed computational single precision floating-point instruction retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
+ "PublicDescription": "Counts once for most SIMD 128-bit packed computational single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x8"
},
{
- "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD 256-bit packed double computational precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
+ "PublicDescription": "Counts once for most SIMD 256-bit packed double computational precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x10"
},
{
- "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD 256-bit packed single computational precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
+ "PublicDescription": "Counts once for most SIMD 256-bit packed single computational precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x20"
},
{
- "BriefDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 8 calculations per element.",
+ "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
+ "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x40"
},
{
- "BriefDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 16 calculations per element.",
+ "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE",
+ "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x80"
},
{
- "BriefDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD scalar computational double precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
+ "PublicDescription": "Counts once for most SIMD scalar computational double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SIMD scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x1"
},
{
- "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD scalar computational single precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
+ "PublicDescription": "Counts once for most SIMD scalar computational single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SIMD scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x2"
},
--- a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
@@ -30,7 +30,21 @@
"UMask": "0x2"
},
{
- "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss.",
+ "BriefDescription": "Retired Instructions who experienced DSB miss.",
+ "Counter": "0,1,2,3",
+ "CounterHTOff": "0,1,2,3",
+ "EventCode": "0xC6",
+ "EventName": "FRONTEND_RETIRED.ANY_DSB_MISS",
+ "MSRIndex": "0x3F7",
+ "MSRValue": "0x1",
+ "PEBS": "1",
+ "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
+ "SampleAfterValue": "100007",
+ "TakenAlone": "1",
+ "UMask": "0x1"
+ },
+ {
+ "BriefDescription": "Retired Instructions who experienced a critical DSB miss.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3",
"EventCode": "0xC6",
@@ -38,7 +52,7 @@
"MSRIndex": "0x3F7",
"MSRValue": "0x11",
"PEBS": "1",
- "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
+ "PublicDescription": "Number of retired Instructions that experienced a critical DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. Critical means stalls were exposed to the back-end as a result of the DSB miss.",
"SampleAfterValue": "100007",
"TakenAlone": "1",
"UMask": "0x1"
--- a/tools/perf/pmu-events/arch/x86/skylakex/memory.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/memory.json
@@ -299,7 +299,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00491",
+ "MSRValue": "0x83FC00491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -312,7 +312,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00491",
+ "MSRValue": "0x63FC00491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -325,7 +325,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000491",
+ "MSRValue": "0x604000491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -338,7 +338,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800491",
+ "MSRValue": "0x63B800491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -377,7 +377,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00490",
+ "MSRValue": "0x83FC00490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -390,7 +390,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00490",
+ "MSRValue": "0x63FC00490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -403,7 +403,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000490",
+ "MSRValue": "0x604000490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -416,7 +416,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800490",
+ "MSRValue": "0x63B800490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -455,7 +455,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00120",
+ "MSRValue": "0x83FC00120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -468,7 +468,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00120",
+ "MSRValue": "0x63FC00120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -481,7 +481,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000120",
+ "MSRValue": "0x604000120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -494,7 +494,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800120",
+ "MSRValue": "0x63B800120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -533,7 +533,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00122",
+ "MSRValue": "0x83FC00122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -546,7 +546,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00122",
+ "MSRValue": "0x63FC00122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -559,7 +559,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000122",
+ "MSRValue": "0x604000122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -572,7 +572,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800122",
+ "MSRValue": "0x63B800122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -611,7 +611,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00004",
+ "MSRValue": "0x83FC00004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -624,7 +624,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00004",
+ "MSRValue": "0x63FC00004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -637,7 +637,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000004",
+ "MSRValue": "0x604000004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -650,7 +650,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800004",
+ "MSRValue": "0x63B800004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -689,7 +689,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00001",
+ "MSRValue": "0x83FC00001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -702,7 +702,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00001",
+ "MSRValue": "0x63FC00001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -715,7 +715,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000001",
+ "MSRValue": "0x604000001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -728,7 +728,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800001",
+ "MSRValue": "0x63B800001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -767,7 +767,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00002",
+ "MSRValue": "0x83FC00002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -780,7 +780,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00002",
+ "MSRValue": "0x63FC00002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -793,7 +793,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000002",
+ "MSRValue": "0x604000002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -806,7 +806,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800002",
+ "MSRValue": "0x63B800002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -845,7 +845,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00400",
+ "MSRValue": "0x83FC00400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -858,7 +858,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00400",
+ "MSRValue": "0x63FC00400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -871,7 +871,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000400",
+ "MSRValue": "0x604000400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -884,7 +884,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800400",
+ "MSRValue": "0x63B800400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -923,7 +923,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00010",
+ "MSRValue": "0x83FC00010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -936,7 +936,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00010",
+ "MSRValue": "0x63FC00010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -949,7 +949,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000010",
+ "MSRValue": "0x604000010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -962,7 +962,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800010",
+ "MSRValue": "0x63B800010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1001,7 +1001,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00020",
+ "MSRValue": "0x83FC00020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1014,7 +1014,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00020",
+ "MSRValue": "0x63FC00020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1027,7 +1027,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000020",
+ "MSRValue": "0x604000020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1040,7 +1040,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800020",
+ "MSRValue": "0x63B800020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1079,7 +1079,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00080",
+ "MSRValue": "0x83FC00080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1092,7 +1092,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00080",
+ "MSRValue": "0x63FC00080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1105,7 +1105,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000080",
+ "MSRValue": "0x604000080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1118,7 +1118,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800080",
+ "MSRValue": "0x63B800080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1157,7 +1157,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00100",
+ "MSRValue": "0x83FC00100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1170,7 +1170,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00100",
+ "MSRValue": "0x63FC00100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1183,7 +1183,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000100",
+ "MSRValue": "0x604000100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1196,7 +1196,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800100",
+ "MSRValue": "0x63B800100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
--- a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
@@ -436,6 +436,17 @@
"SampleAfterValue": "2000003"
},
{
+ "BriefDescription": "Number of all retired NOP instructions.",
+ "Counter": "0,1,2,3",
+ "CounterHTOff": "0,1,2,3,4,5,6,7",
+ "Errata": "SKL091, SKL044",
+ "EventCode": "0xC0",
+ "EventName": "INST_RETIRED.NOP",
+ "PEBS": "1",
+ "SampleAfterValue": "2000003",
+ "UMask": "0x2"
+ },
+ {
"BriefDescription": "Precise instruction retired event with HW to reduce effect of PEBS shadow in IP distribution",
"Counter": "1",
"CounterHTOff": "1",
--- a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
@@ -1,26 +1,167 @@
[
{
+ "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend",
+ "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)",
+ "MetricGroup": "TopdownL1",
+ "MetricName": "Frontend_Bound",
+ "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+ "MetricGroup": "TopdownL1_SMT",
+ "MetricName": "Frontend_Bound_SMT",
+ "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations",
+ "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD)",
+ "MetricGroup": "TopdownL1",
+ "MetricName": "Bad_Speculation",
+ "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+ "MetricGroup": "TopdownL1_SMT",
+ "MetricName": "Bad_Speculation_SMT",
+ "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend",
+ "MetricConstraint": "NO_NMI_WATCHDOG",
+ "MetricExpr": "1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD)",
+ "MetricGroup": "TopdownL1",
+ "MetricName": "Backend_Bound",
+ "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+ "MetricGroup": "TopdownL1_SMT",
+ "MetricName": "Backend_Bound_SMT",
+ "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired",
+ "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)",
+ "MetricGroup": "TopdownL1",
+ "MetricName": "Retiring",
+ "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum Pipeline_Width throughput was achieved. Maximizing Retiring typically increases the Instructions-per-cycle (see IPC metric). Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Heavy-operations or Microcode Assists are categorized under Retiring. They often indicate suboptimal performance and can often be optimized or avoided. "
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+ "MetricGroup": "TopdownL1_SMT",
+ "MetricName": "Retiring_SMT",
+ "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum Pipeline_Width throughput was achieved. Maximizing Retiring typically increases the Instructions-per-cycle (see IPC metric). Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Heavy-operations or Microcode Assists are categorized under Retiring. They often indicate suboptimal performance and can often be optimized or avoided. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Branch Misprediction related bottlenecks",
+ "MetricExpr": "100 * ( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) )",
+ "MetricGroup": "Bad;BadSpec;BrMispredicts",
+ "MetricName": "Mispredictions"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Branch Misprediction related bottlenecks",
+ "MetricExpr": "100 * ( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) )",
+ "MetricGroup": "Bad;BadSpec;BrMispredicts_SMT",
+ "MetricName": "Mispredictions_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of (external) Memory Bandwidth related bottlenecks",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) * ( ( (CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (min( CPU_CLK_UNHALTED.THREAD , cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=4@ ) / CPU_CLK_UNHALTED.THREAD) / #(CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) ) + ( (( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (OFFCORE_REQUESTS_BUFFER.SQ_FULL / CPU_CLK_UNHALTED.THREAD) / #(( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) ) ) + ( (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( ((L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )) * cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ / CPU_CLK_UNHALTED.THREAD) / #(max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) ) ",
+ "MetricGroup": "Mem;MemoryBW;Offcore",
+ "MetricName": "Memory_Bandwidth"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of (external) Memory Bandwidth related bottlenecks",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * ( ( (CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (min( CPU_CLK_UNHALTED.THREAD , cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=4@ ) / CPU_CLK_UNHALTED.THREAD) / #(CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) ) + ( (( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (( OFFCORE_REQUESTS_BUFFER.SQ_FULL / 2 ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) / #(( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) ) ) + ( (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( ((L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )) * cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ / CPU_CLK_UNHALTED.THREAD) / #(max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) ) ",
+ "MetricGroup": "Mem;MemoryBW;Offcore_SMT",
+ "MetricName": "Memory_Bandwidth_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Memory Latency related bottlenecks (external memory and off-core caches)",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) * ( ( (CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (min( CPU_CLK_UNHALTED.THREAD , OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD ) / CPU_CLK_UNHALTED.THREAD - (min( CPU_CLK_UNHALTED.THREAD , cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=4@ ) / CPU_CLK_UNHALTED.THREAD)) / #(CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) ) + ( (( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (( (20.5 * ((CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time)) - (3.5 * ((CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time)) ) * MEM_LOAD_RETIRED.L3_HIT * (1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) / 2) / CPU_CLK_UNHALTED.THREAD) / #(( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) ) + ( (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD)) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) )",
+ "MetricGroup": "Mem;MemoryLat;Offcore",
+ "MetricName": "Memory_Latency"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Memory Latency related bottlenecks (external memory and off-core caches)",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * ( ( (CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (min( CPU_CLK_UNHALTED.THREAD , OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD ) / CPU_CLK_UNHALTED.THREAD - (min( CPU_CLK_UNHALTED.THREAD , cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=4@ ) / CPU_CLK_UNHALTED.THREAD)) / #(CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) ) + ( (( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (( (20.5 * ((CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time)) - (3.5 * ((CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time)) ) * MEM_LOAD_RETIRED.L3_HIT * (1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) / 2) / CPU_CLK_UNHALTED.THREAD) / #(( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) ) + ( (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD)) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) )",
+ "MetricGroup": "Mem;MemoryLat;Offcore_SMT",
+ "MetricName": "Memory_Latency_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Memory Address Translation related bottlenecks (data-side TLBs)",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) * ( ( (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) / ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (min( 9 * cpu@DTLB_LOAD_MISSES.STLB_HIT\\,cmask\\=1@ + DTLB_LOAD_MISSES.WALK_ACTIVE , max( CYCLE_ACTIVITY.CYCLES_MEM_ANY - CYCLE_ACTIVITY.CYCLES_L1D_MISS , 0 ) ) / CPU_CLK_UNHALTED.THREAD) / (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) ) + ( (EXE_ACTIVITY.BOUND_ON_STORES / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (( 9 * cpu@DTLB_STORE_MISSES.STLB_HIT\\,cmask\\=1@ + DTLB_STORE_MISSES.WALK_ACTIVE ) / CPU_CLK_UNHALTED.THREAD) / #(EXE_ACTIVITY.BOUND_ON_STORES / CPU_CLK_UNHALTED.THREAD) ) ) ",
+ "MetricGroup": "Mem;MemoryTLB",
+ "MetricName": "Memory_Data_TLBs"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Memory Address Translation related bottlenecks (data-side TLBs)",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * ( ( (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) / ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (min( 9 * cpu@DTLB_LOAD_MISSES.STLB_HIT\\,cmask\\=1@ + DTLB_LOAD_MISSES.WALK_ACTIVE , max( CYCLE_ACTIVITY.CYCLES_MEM_ANY - CYCLE_ACTIVITY.CYCLES_L1D_MISS , 0 ) ) / CPU_CLK_UNHALTED.THREAD) / (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) ) + ( (EXE_ACTIVITY.BOUND_ON_STORES / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (( 9 * cpu@DTLB_STORE_MISSES.STLB_HIT\\,cmask\\=1@ + DTLB_STORE_MISSES.WALK_ACTIVE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) / #(EXE_ACTIVITY.BOUND_ON_STORES / CPU_CLK_UNHALTED.THREAD) ) ) ",
+ "MetricGroup": "Mem;MemoryTLB;_SMT",
+ "MetricName": "Memory_Data_TLBs_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of branch related instructions (used for program control-flow including function calls)",
+ "MetricExpr": "100 * (( BR_INST_RETIRED.CONDITIONAL + 3 * BR_INST_RETIRED.NEAR_CALL + (BR_INST_RETIRED.NEAR_TAKEN - ( BR_INST_RETIRED.CONDITIONAL - BR_INST_RETIRED.NOT_TAKEN ) - 2 * BR_INST_RETIRED.NEAR_CALL) ) / (4 * CPU_CLK_UNHALTED.THREAD))",
+ "MetricGroup": "Ret",
+ "MetricName": "Branching_Overhead"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of branch related instructions (used for program control-flow including function calls)",
+ "MetricExpr": "100 * (( BR_INST_RETIRED.CONDITIONAL + 3 * BR_INST_RETIRED.NEAR_CALL + (BR_INST_RETIRED.NEAR_TAKEN - ( BR_INST_RETIRED.CONDITIONAL - BR_INST_RETIRED.NOT_TAKEN ) - 2 * BR_INST_RETIRED.NEAR_CALL) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))",
+ "MetricGroup": "Ret_SMT",
+ "MetricName": "Branching_Overhead_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of instruction fetch related bottlenecks by large code footprint programs (i-side cache; TLB and BTB misses)",
+ "MetricExpr": "100 * (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ( (ICACHE_64B.IFTAG_STALL / CPU_CLK_UNHALTED.THREAD) + (( ICACHE_16B.IFDATA_STALL + 2 * cpu@ICACHE_16B.IFDATA_STALL\\,cmask\\=1\\,edge@ ) / CPU_CLK_UNHALTED.THREAD) + (9 * BACLEARS.ANY / CPU_CLK_UNHALTED.THREAD) ) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD))",
+ "MetricGroup": "BigFoot;Fed;Frontend;IcMiss;MemoryTLB",
+ "MetricName": "Big_Code"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of instruction fetch related bottlenecks by large code footprint programs (i-side cache; TLB and BTB misses)",
+ "MetricExpr": "100 * (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ( (ICACHE_64B.IFTAG_STALL / CPU_CLK_UNHALTED.THREAD) + (( ICACHE_16B.IFDATA_STALL + 2 * cpu@ICACHE_16B.IFDATA_STALL\\,cmask\\=1\\,edge@ ) / CPU_CLK_UNHALTED.THREAD) + (9 * BACLEARS.ANY / CPU_CLK_UNHALTED.THREAD) ) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))",
+ "MetricGroup": "BigFoot;Fed;Frontend;IcMiss;MemoryTLB_SMT",
+ "MetricName": "Big_Code_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of instruction fetch bandwidth related bottlenecks",
+ "MetricExpr": "100 * ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) ) - (100 * (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ( (ICACHE_64B.IFTAG_STALL / CPU_CLK_UNHALTED.THREAD) + (( ICACHE_16B.IFDATA_STALL + 2 * cpu@ICACHE_16B.IFDATA_STALL\\,cmask\\=1\\,edge@ ) / CPU_CLK_UNHALTED.THREAD) + (9 * BACLEARS.ANY / CPU_CLK_UNHALTED.THREAD) ) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)))",
+ "MetricGroup": "Fed;FetchBW;Frontend",
+ "MetricName": "Instruction_Fetch_BW"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of instruction fetch bandwidth related bottlenecks",
+ "MetricExpr": "100 * ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) ) - (100 * (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ( (ICACHE_64B.IFTAG_STALL / CPU_CLK_UNHALTED.THREAD) + (( ICACHE_16B.IFDATA_STALL + 2 * cpu@ICACHE_16B.IFDATA_STALL\\,cmask\\=1\\,edge@ ) / CPU_CLK_UNHALTED.THREAD) + (9 * BACLEARS.ANY / CPU_CLK_UNHALTED.THREAD) ) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))",
+ "MetricGroup": "Fed;FetchBW;Frontend_SMT",
+ "MetricName": "Instruction_Fetch_BW_SMT"
+ },
+ {
"BriefDescription": "Instructions Per Cycle (per Logical Processor)",
"MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
- "MetricGroup": "Summary",
+ "MetricGroup": "Ret;Summary",
"MetricName": "IPC"
},
{
"BriefDescription": "Uops Per Instruction",
"MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY",
- "MetricGroup": "Pipeline;Retire",
+ "MetricGroup": "Pipeline;Ret;Retire",
"MetricName": "UPI"
},
{
"BriefDescription": "Instruction per taken branch",
- "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
- "MetricGroup": "Branches;FetchBW;PGO",
- "MetricName": "IpTB"
+ "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / BR_INST_RETIRED.NEAR_TAKEN",
+ "MetricGroup": "Branches;Fed;FetchBW",
+ "MetricName": "UpTB"
},
{
"BriefDescription": "Cycles Per Instruction (per Logical Processor)",
"MetricExpr": "1 / (INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD)",
- "MetricGroup": "Pipeline",
+ "MetricGroup": "Pipeline;Mem",
"MetricName": "CPI"
},
{
@@ -30,39 +171,84 @@
"MetricName": "CLKS"
},
{
- "BriefDescription": "Instructions Per Cycle (per physical core)",
+ "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
+ "MetricExpr": "4 * CPU_CLK_UNHALTED.THREAD",
+ "MetricGroup": "TmaL1",
+ "MetricName": "SLOTS"
+ },
+ {
+ "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
+ "MetricExpr": "4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+ "MetricGroup": "TmaL1_SMT",
+ "MetricName": "SLOTS_SMT"
+ },
+ {
+ "BriefDescription": "The ratio of Executed- by Issued-Uops",
+ "MetricExpr": "UOPS_EXECUTED.THREAD / UOPS_ISSUED.ANY",
+ "MetricGroup": "Cor;Pipeline",
+ "MetricName": "Execute_per_Issue",
+ "PublicDescription": "The ratio of Executed- by Issued-Uops. Ratio > 1 suggests high rate of uop micro-fusions. Ratio < 1 suggest high rate of \"execute\" at rename stage."
+ },
+ {
+ "BriefDescription": "Instructions Per Cycle across hyper-threads (per physical core)",
"MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
- "MetricGroup": "SMT;TmaL1",
+ "MetricGroup": "Ret;SMT;TmaL1",
"MetricName": "CoreIPC"
},
{
- "BriefDescription": "Instructions Per Cycle (per physical core)",
+ "BriefDescription": "Instructions Per Cycle across hyper-threads (per physical core)",
"MetricExpr": "INST_RETIRED.ANY / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
- "MetricGroup": "SMT;TmaL1",
+ "MetricGroup": "Ret;SMT;TmaL1_SMT",
"MetricName": "CoreIPC_SMT"
},
{
"BriefDescription": "Floating Point Operations Per Cycle",
"MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / CPU_CLK_UNHALTED.THREAD",
- "MetricGroup": "Flops",
+ "MetricGroup": "Ret;Flops",
"MetricName": "FLOPc"
},
{
"BriefDescription": "Floating Point Operations Per Cycle",
"MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
- "MetricGroup": "Flops_SMT",
+ "MetricGroup": "Ret;Flops_SMT",
"MetricName": "FLOPc_SMT"
},
{
+ "BriefDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width)",
+ "MetricExpr": "( (FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE) + (FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE) ) / ( 2 * CPU_CLK_UNHALTED.THREAD )",
+ "MetricGroup": "Cor;Flops;HPC",
+ "MetricName": "FP_Arith_Utilization",
+ "PublicDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width). Values > 1 are possible due to Fused-Multiply Add (FMA) counting."
+ },
+ {
+ "BriefDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width). SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "( (FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE) + (FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE) ) / ( 2 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ) )",
+ "MetricGroup": "Cor;Flops;HPC_SMT",
+ "MetricName": "FP_Arith_Utilization_SMT",
+ "PublicDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width). Values > 1 are possible due to Fused-Multiply Add (FMA) counting. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
"BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
"MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)",
- "MetricGroup": "Pipeline;PortsUtil",
+ "MetricGroup": "Backend;Cor;Pipeline;PortsUtil",
"MetricName": "ILP"
},
{
+ "BriefDescription": "Branch Misprediction Cost: Fraction of TMA slots wasted per non-speculative branch misprediction (retired JEClear)",
+ "MetricExpr": " ( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) ) * (4 * CPU_CLK_UNHALTED.THREAD) / BR_MISP_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;BrMispredicts",
+ "MetricName": "Branch_Misprediction_Cost"
+ },
+ {
+ "BriefDescription": "Branch Misprediction Cost: Fraction of TMA slots wasted per non-speculative branch misprediction (retired JEClear)",
+ "MetricExpr": " ( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) ) * (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) / BR_MISP_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;BrMispredicts_SMT",
+ "MetricName": "Branch_Misprediction_Cost_SMT"
+ },
+ {
"BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
"MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
- "MetricGroup": "BrMispredicts",
+ "MetricGroup": "Bad;BadSpec;BrMispredicts",
"MetricName": "IpMispredict"
},
{
@@ -86,122 +272,249 @@
{
"BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
- "MetricGroup": "Branches;InsType",
+ "MetricGroup": "Branches;Fed;InsType",
"MetricName": "IpBranch"
},
{
"BriefDescription": "Instructions per (near) call (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL",
- "MetricGroup": "Branches",
+ "MetricGroup": "Branches;Fed;PGO",
"MetricName": "IpCall"
},
{
+ "BriefDescription": "Instruction per taken branch",
+ "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
+ "MetricGroup": "Branches;Fed;FetchBW;Frontend;PGO",
+ "MetricName": "IpTB"
+ },
+ {
"BriefDescription": "Branch instructions per taken branch. ",
"MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN",
- "MetricGroup": "Branches;PGO",
+ "MetricGroup": "Branches;Fed;PGO",
"MetricName": "BpTkBranch"
},
{
"BriefDescription": "Instructions per Floating Point (FP) Operation (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )",
- "MetricGroup": "Flops;FpArith;InsType",
+ "MetricGroup": "Flops;InsType",
"MetricName": "IpFLOP"
},
{
+ "BriefDescription": "Instructions per FP Arithmetic instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / ( (FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE) + (FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE) )",
+ "MetricGroup": "Flops;InsType",
+ "MetricName": "IpArith",
+ "PublicDescription": "Instructions per FP Arithmetic instruction (lower number means higher occurrence rate). May undercount due to FMA double counting. Approximated prior to BDW."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic Scalar Single-Precision instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
+ "MetricGroup": "Flops;FpScalar;InsType",
+ "MetricName": "IpArith_Scalar_SP",
+ "PublicDescription": "Instructions per FP Arithmetic Scalar Single-Precision instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic Scalar Double-Precision instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
+ "MetricGroup": "Flops;FpScalar;InsType",
+ "MetricName": "IpArith_Scalar_DP",
+ "PublicDescription": "Instructions per FP Arithmetic Scalar Double-Precision instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic AVX/SSE 128-bit instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / ( FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE )",
+ "MetricGroup": "Flops;FpVector;InsType",
+ "MetricName": "IpArith_AVX128",
+ "PublicDescription": "Instructions per FP Arithmetic AVX/SSE 128-bit instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic AVX* 256-bit instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / ( FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )",
+ "MetricGroup": "Flops;FpVector;InsType",
+ "MetricName": "IpArith_AVX256",
+ "PublicDescription": "Instructions per FP Arithmetic AVX* 256-bit instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic AVX 512-bit instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / ( FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )",
+ "MetricGroup": "Flops;FpVector;InsType",
+ "MetricName": "IpArith_AVX512",
+ "PublicDescription": "Instructions per FP Arithmetic AVX 512-bit instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
"BriefDescription": "Total number of retired Instructions, Sample with: INST_RETIRED.PREC_DIST",
"MetricExpr": "INST_RETIRED.ANY",
"MetricGroup": "Summary;TmaL1",
"MetricName": "Instructions"
},
{
+ "BriefDescription": "Average number of Uops issued by front-end when it issued something",
+ "MetricExpr": "UOPS_ISSUED.ANY / cpu@UOPS_ISSUED.ANY\\,cmask\\=1@",
+ "MetricGroup": "Fed;FetchBW",
+ "MetricName": "Fetch_UpC"
+ },
+ {
"BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
"MetricExpr": "IDQ.DSB_UOPS / (IDQ.DSB_UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
- "MetricGroup": "DSB;FetchBW",
+ "MetricGroup": "DSB;Fed;FetchBW",
"MetricName": "DSB_Coverage"
},
{
- "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)",
+ "BriefDescription": "Total penalty related to DSB (uop cache) misses - subset/see of/the Instruction_Fetch_BW Bottleneck.",
+ "MetricExpr": "(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * (DSB2MITE_SWITCHES.PENALTY_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) + ((IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD))) * (( IDQ.ALL_MITE_CYCLES_ANY_UOPS - IDQ.ALL_MITE_CYCLES_4_UOPS ) / CPU_CLK_UNHALTED.THREAD / 2) / #((IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)))",
+ "MetricGroup": "DSBmiss;Fed",
+ "MetricName": "DSB_Misses_Cost"
+ },
+ {
+ "BriefDescription": "Total penalty related to DSB (uop cache) misses - subset/see of/the Instruction_Fetch_BW Bottleneck.",
+ "MetricExpr": "(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * (DSB2MITE_SWITCHES.PENALTY_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) + ((IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * (( IDQ.ALL_MITE_CYCLES_ANY_UOPS - IDQ.ALL_MITE_CYCLES_4_UOPS ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ) / 2) / #((IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))",
+ "MetricGroup": "DSBmiss;Fed_SMT",
+ "MetricName": "DSB_Misses_Cost_SMT"
+ },
+ {
+ "BriefDescription": "Number of Instructions per non-speculative DSB miss",
+ "MetricExpr": "INST_RETIRED.ANY / FRONTEND_RETIRED.ANY_DSB_MISS",
+ "MetricGroup": "DSBmiss;Fed",
+ "MetricName": "IpDSB_Miss_Ret"
+ },
+ {
+ "BriefDescription": "Fraction of branches that are non-taken conditionals",
+ "MetricExpr": "BR_INST_RETIRED.NOT_TAKEN / BR_INST_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;Branches;CodeGen;PGO",
+ "MetricName": "Cond_NT"
+ },
+ {
+ "BriefDescription": "Fraction of branches that are taken conditionals",
+ "MetricExpr": "( BR_INST_RETIRED.CONDITIONAL - BR_INST_RETIRED.NOT_TAKEN ) / BR_INST_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;Branches;CodeGen;PGO",
+ "MetricName": "Cond_TK"
+ },
+ {
+ "BriefDescription": "Fraction of branches that are CALL or RET",
+ "MetricExpr": "( BR_INST_RETIRED.NEAR_CALL + BR_INST_RETIRED.NEAR_RETURN ) / BR_INST_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;Branches",
+ "MetricName": "CallRet"
+ },
+ {
+ "BriefDescription": "Fraction of branches that are unconditional (direct or indirect) jumps",
+ "MetricExpr": "(BR_INST_RETIRED.NEAR_TAKEN - ( BR_INST_RETIRED.CONDITIONAL - BR_INST_RETIRED.NOT_TAKEN ) - 2 * BR_INST_RETIRED.NEAR_CALL) / BR_INST_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;Branches",
+ "MetricName": "Jump"
+ },
+ {
+ "BriefDescription": "Actual Average Latency for L1 data-cache miss demand load instructions (in core cycles)",
"MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )",
- "MetricGroup": "MemoryBound;MemoryLat",
- "MetricName": "Load_Miss_Real_Latency"
+ "MetricGroup": "Mem;MemoryBound;MemoryLat",
+ "MetricName": "Load_Miss_Real_Latency",
+ "PublicDescription": "Actual Average Latency for L1 data-cache miss demand load instructions (in core cycles). Latency may be overestimated for multi-load instructions - e.g. repeat strings."
},
{
"BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-Logical Processor)",
"MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES",
- "MetricGroup": "MemoryBound;MemoryBW",
+ "MetricGroup": "Mem;MemoryBound;MemoryBW",
"MetricName": "MLP"
},
{
- "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
- "MetricConstraint": "NO_NMI_WATCHDOG",
- "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * CORE_CLKS )",
- "MetricGroup": "MemoryTLB",
- "MetricName": "Page_Walks_Utilization"
- },
- {
"BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]",
"MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
- "MetricGroup": "MemoryBW",
+ "MetricGroup": "Mem;MemoryBW",
"MetricName": "L1D_Cache_Fill_BW"
},
{
"BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]",
"MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time",
- "MetricGroup": "MemoryBW",
+ "MetricGroup": "Mem;MemoryBW",
"MetricName": "L2_Cache_Fill_BW"
},
{
"BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
"MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time",
- "MetricGroup": "MemoryBW",
+ "MetricGroup": "Mem;MemoryBW",
"MetricName": "L3_Cache_Fill_BW"
},
{
"BriefDescription": "Average per-core data access bandwidth to the L3 cache [GB / sec]",
"MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time",
- "MetricGroup": "MemoryBW;Offcore",
+ "MetricGroup": "Mem;MemoryBW;Offcore",
"MetricName": "L3_Cache_Access_BW"
},
{
"BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
"MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses",
+ "MetricGroup": "Mem;CacheMisses",
"MetricName": "L1MPKI"
},
{
+ "BriefDescription": "L1 cache true misses per kilo instruction for all demand loads (including speculative)",
+ "MetricExpr": "1000 * L2_RQSTS.ALL_DEMAND_DATA_RD / INST_RETIRED.ANY",
+ "MetricGroup": "Mem;CacheMisses",
+ "MetricName": "L1MPKI_Load"
+ },
+ {
"BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
"MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses",
+ "MetricGroup": "Mem;Backend;CacheMisses",
"MetricName": "L2MPKI"
},
{
"BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)",
"MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses;Offcore",
+ "MetricGroup": "Mem;CacheMisses;Offcore",
"MetricName": "L2MPKI_All"
},
{
+ "BriefDescription": "L2 cache misses per kilo instruction for all demand loads (including speculative)",
+ "MetricExpr": "1000 * L2_RQSTS.DEMAND_DATA_RD_MISS / INST_RETIRED.ANY",
+ "MetricGroup": "Mem;CacheMisses",
+ "MetricName": "L2MPKI_Load"
+ },
+ {
"BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)",
"MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses",
+ "MetricGroup": "Mem;CacheMisses",
"MetricName": "L2HPKI_All"
},
{
+ "BriefDescription": "L2 cache hits per kilo instruction for all demand loads (including speculative)",
+ "MetricExpr": "1000 * L2_RQSTS.DEMAND_DATA_RD_HIT / INST_RETIRED.ANY",
+ "MetricGroup": "Mem;CacheMisses",
+ "MetricName": "L2HPKI_Load"
+ },
+ {
"BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
"MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses",
+ "MetricGroup": "Mem;CacheMisses",
"MetricName": "L3MPKI"
},
{
+ "BriefDescription": "Fill Buffer (FB) true hits per kilo instructions for retired demand loads",
+ "MetricExpr": "1000 * MEM_LOAD_RETIRED.FB_HIT / INST_RETIRED.ANY",
+ "MetricGroup": "Mem;CacheMisses",
+ "MetricName": "FB_HPKI"
+ },
+ {
+ "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
+ "MetricConstraint": "NO_NMI_WATCHDOG",
+ "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * CPU_CLK_UNHALTED.THREAD )",
+ "MetricGroup": "Mem;MemoryTLB",
+ "MetricName": "Page_Walks_Utilization"
+ },
+ {
+ "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
+ "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ) )",
+ "MetricGroup": "Mem;MemoryTLB_SMT",
+ "MetricName": "Page_Walks_Utilization_SMT"
+ },
+ {
"BriefDescription": "Rate of silent evictions from the L2 cache per Kilo instruction where the evicted lines are dropped (no writeback to L3 or memory)",
"MetricExpr": "1000 * L2_LINES_OUT.SILENT / INST_RETIRED.ANY",
- "MetricGroup": "L2Evicts;Server",
+ "MetricGroup": "L2Evicts;Mem;Server",
"MetricName": "L2_Evictions_Silent_PKI"
},
{
"BriefDescription": "Rate of non silent evictions from the L2 cache per Kilo instruction",
"MetricExpr": "1000 * L2_LINES_OUT.NON_SILENT / INST_RETIRED.ANY",
- "MetricGroup": "L2Evicts;Server",
+ "MetricGroup": "L2Evicts;Mem;Server",
"MetricName": "L2_Evictions_NonSilent_PKI"
},
{
@@ -219,7 +532,7 @@
{
"BriefDescription": "Giga Floating Point Operations Per Second",
"MetricExpr": "( ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / 1000000000 ) / duration_time",
- "MetricGroup": "Flops;HPC",
+ "MetricGroup": "Cor;Flops;HPC",
"MetricName": "GFLOPs"
},
{
@@ -229,6 +542,48 @@
"MetricName": "Turbo_Utilization"
},
{
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for baseline license level 0",
+ "MetricExpr": "CORE_POWER.LVL0_TURBO_LICENSE / CPU_CLK_UNHALTED.THREAD",
+ "MetricGroup": "Power",
+ "MetricName": "Power_License0_Utilization",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for baseline license level 0. This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for baseline license level 0. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "CORE_POWER.LVL0_TURBO_LICENSE / 2 / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+ "MetricGroup": "Power_SMT",
+ "MetricName": "Power_License0_Utilization_SMT",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for baseline license level 0. This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 1",
+ "MetricExpr": "CORE_POWER.LVL1_TURBO_LICENSE / CPU_CLK_UNHALTED.THREAD",
+ "MetricGroup": "Power",
+ "MetricName": "Power_License1_Utilization",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 1. This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 1. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "CORE_POWER.LVL1_TURBO_LICENSE / 2 / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+ "MetricGroup": "Power_SMT",
+ "MetricName": "Power_License1_Utilization_SMT",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 1. This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 2 (introduced in SKX)",
+ "MetricExpr": "CORE_POWER.LVL2_TURBO_LICENSE / CPU_CLK_UNHALTED.THREAD",
+ "MetricGroup": "Power",
+ "MetricName": "Power_License2_Utilization",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 2 (introduced in SKX). This includes high current AVX 512-bit instructions."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 2 (introduced in SKX). SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "CORE_POWER.LVL2_TURBO_LICENSE / 2 / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+ "MetricGroup": "Power_SMT",
+ "MetricName": "Power_License2_Utilization_SMT",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 2 (introduced in SKX). This includes high current AVX 512-bit instructions. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
"BriefDescription": "Fraction of cycles where both hardware Logical Processors were active",
"MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0",
"MetricGroup": "SMT",
@@ -241,33 +596,45 @@
"MetricName": "Kernel_Utilization"
},
{
+ "BriefDescription": "Cycles Per Instruction for the Operating System (OS) Kernel mode",
+ "MetricExpr": "CPU_CLK_UNHALTED.THREAD_P:k / INST_RETIRED.ANY_P:k",
+ "MetricGroup": "OS",
+ "MetricName": "Kernel_CPI"
+ },
+ {
"BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]",
"MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time",
- "MetricGroup": "HPC;MemoryBW;SoC",
+ "MetricGroup": "HPC;Mem;MemoryBW;SoC",
"MetricName": "DRAM_BW_Use"
},
{
"BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches",
"MetricExpr": "1000000000 * ( cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433@ / cha@event\\=0x35\\,umask\\=0x21\\,config\\=0x40433@ ) / ( cha_0@event\\=0x0@ / duration_time )",
- "MetricGroup": "MemoryLat;SoC",
+ "MetricGroup": "Mem;MemoryLat;SoC",
"MetricName": "MEM_Read_Latency"
},
{
"BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches",
"MetricExpr": "cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433@ / cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433\\,thresh\\=1@",
- "MetricGroup": "MemoryBW;SoC",
+ "MetricGroup": "Mem;MemoryBW;SoC",
"MetricName": "MEM_Parallel_Reads"
},
{
+ "BriefDescription": "Average latency of data read request to external DRAM memory [in nanoseconds]. Accounts for demand loads and L1/L2 data-read prefetches",
+ "MetricExpr": "1000000000 * ( UNC_M_RPQ_OCCUPANCY / UNC_M_RPQ_INSERTS ) / imc_0@event\\=0x0@",
+ "MetricGroup": "Mem;MemoryLat;SoC;Server",
+ "MetricName": "MEM_DRAM_Read_Latency"
+ },
+ {
"BriefDescription": "Average IO (network or disk) Bandwidth Use for Writes [GB / sec]",
"MetricExpr": "( UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3 ) * 4 / 1000000000 / duration_time",
- "MetricGroup": "IoBW;SoC;Server",
+ "MetricGroup": "IoBW;Mem;SoC;Server",
"MetricName": "IO_Write_BW"
},
{
"BriefDescription": "Average IO (network or disk) Bandwidth Use for Reads [GB / sec]",
"MetricExpr": "( UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 ) * 4 / 1000000000 / duration_time",
- "MetricGroup": "IoBW;SoC;Server",
+ "MetricGroup": "IoBW;Mem;SoC;Server",
"MetricName": "IO_Read_BW"
},
{
--- a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
@@ -538,6 +538,18 @@
"Unit": "IIO"
},
{
+ "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0-3",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC2",
+ "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.ALL_PARTS",
+ "FCMask": "0x4",
+ "PerPkg": "1",
+ "PortMask": "0x0f",
+ "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0-3",
+ "UMask": "0x03",
+ "Unit": "IIO"
+ },
+ {
"BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0",
"Counter": "0,1,2,3",
"EventCode": "0xC2",
@@ -586,6 +598,17 @@
"Unit": "IIO"
},
{
+ "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0-3",
+ "Counter": "2,3",
+ "EventCode": "0xD5",
+ "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.ALL_PARTS",
+ "FCMask": "0x04",
+ "PerPkg": "1",
+ "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0-3",
+ "UMask": "0x0f",
+ "Unit": "IIO"
+ },
+ {
"BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0",
"Counter": "2,3",
"EventCode": "0xD5",