This is the start of the stable review cycle for the 5.15.33 release.
There are 913 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.33-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.15.33-rc1
Eric W. Biederman <[email protected]>
coredump: Use the vma snapshot in fill_files_note
Eric W. Biederman <[email protected]>
coredump/elf: Pass coredump_params into fill_note_info
Eric W. Biederman <[email protected]>
coredump: Remove the WARN_ON in dump_vma_snapshot
Eric W. Biederman <[email protected]>
coredump: Snapshot the vmas in do_coredump
David Stevens <[email protected]>
iommu/dma: Account for min_align_mask w/swiotlb
David Stevens <[email protected]>
swiotlb: Support aligned swiotlb buffers
David Stevens <[email protected]>
iommu/dma: Check CONFIG_SWIOTLB more broadly
David Stevens <[email protected]>
iommu/dma: Fold _swiotlb helpers into callers
David Stevens <[email protected]>
iommu/dma: Skip extra sync during unmap w/swiotlb
Paolo Bonzini <[email protected]>
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
Ulf Hansson <[email protected]>
mmc: rtsx: Fix build errors/warnings for unused variable
Kai-Heng Feng <[email protected]>
mmc: rtsx: Let MMC core handle runtime PM
Jackie Liu <[email protected]>
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
Paul E. McKenney <[email protected]>
torture: Make torture.sh help message match reality
Martin Varghese <[email protected]>
openvswitch: Fixed nd target mask field in the flow dump.
Guilherme G. Piccoli <[email protected]>
docs: sysctl/kernel: add missing bit to panic_print
Anton Ivanov <[email protected]>
um: Fix uml_mconsole stop/go
Kuldeep Singh <[email protected]>
arm64: dts: ls1046a: Update i2c node dma properties
Kuldeep Singh <[email protected]>
arm64: dts: ls1043a: Update i2c dma properties
Kuldeep Singh <[email protected]>
ARM: dts: spear13xx: Update SPI dma properties
Kuldeep Singh <[email protected]>
ARM: dts: spear1340: Update serial node properties
Leilk Liu <[email protected]>
spi: mediatek: support tick_delay without enhance_timing
Janusz Krzysztofik <[email protected]>
media: ov6650: Fix crop rectangle affected by set format
Janusz Krzysztofik <[email protected]>
media: ov6650: Add try support to selection API operations
Ian Rogers <[email protected]>
perf vendor events: Update metrics for SkyLake Server
Amadeusz Sławiński <[email protected]>
ASoC: topology: Allow TLV control to be either read or write
Zheng Bin <[email protected]>
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
Zhihao Cheng <[email protected]>
ubi: fastmap: Return error code if memory allocation fails in add_aeb()
Horatiu Vultur <[email protected]>
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Fix example
Yong Wu <[email protected]>
dt-bindings: memory: mtk-smi: No need mediatek,larb-id for mt8167
Miquel Raynal <[email protected]>
dt-bindings: spi: mxic: The interrupt property is not mandatory
Miquel Raynal <[email protected]>
dt-bindings: mtd: nand-controller: Fix a comment in the examples
Miquel Raynal <[email protected]>
dt-bindings: mtd: nand-controller: Fix the reg property description
Kai-Heng Feng <[email protected]>
mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM
Hengqi Chen <[email protected]>
bpf: Fix comment for helper bpf_current_task_under_cgroup()
Namhyung Kim <[email protected]>
bpf: Adjust BPF stack helper functions to accommodate skip > 0
Kuniyuki Iwashima <[email protected]>
af_unix: Support POLLPRI for OOB.
Randy Dunlap <[email protected]>
mm/usercopy: return 1 from hardened_usercopy __setup() handler
Randy Dunlap <[email protected]>
mm/memcontrol: return 1 from cgroup.memory __setup() handler
Randy Dunlap <[email protected]>
ARM: 9187/1: JIVE: fix return value of __setup handler
Randy Dunlap <[email protected]>
mm/mmap: return 1 from stack_guard_gap __setup() handler
Eric Dumazet <[email protected]>
net: preserve skb_end_offset() in skb_unclone_keeptruesize()
Eric Dumazet <[email protected]>
net: add skb_set_end_offset() helper
Steven Rostedt (Google) <[email protected]>
tracing: Have type enum modifications copy the strings
Linus Torvalds <[email protected]>
Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
Jiasheng Jiang <[email protected]>
ASoC: soc-compress: Change the check for codec_dai
Will Deacon <[email protected]>
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix pinctrl-0 items to be size-1 items on ethernet
Saurav Kashyap <[email protected]>
scsi: qla2xxx: Add qla2x00_async_done() for async routines
Maxime Ripard <[email protected]>
drm/connector: Fix typo in documentation
Lv Ruyi <[email protected]>
proc: bootconfig: Add null pointer check
Oliver Hartkopp <[email protected]>
can: isotp: restore accidentally removed MSG_PEEK feature
Prashant Malani <[email protected]>
platform/chrome: cros_ec_typec: Check for EC device
Jon Hunter <[email protected]>
spi: Fix Tegra QSPI example
Anirudh Rayabharam <[email protected]>
vhost: handle error while adding split ranges to iotlb
Rafael J. Wysocki <[email protected]>
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
Fangrui Song <[email protected]>
riscv module: remove (NOLOAD)
Pavel Begunkov <[email protected]>
io_uring: fix memory leak of uid in files registration
Christophe JAILLET <[email protected]>
block: Fix the maximum minor value is blk_alloc_ext_minor()
Arnd Bergmann <[email protected]>
ARM: iop32x: offset IRQ numbers by 1
Baokun Li <[email protected]>
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
Jiaxin Yu <[email protected]>
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
Jonathan Neuschäfer <[email protected]>
pinctrl: nuvoton: npcm7xx: Use %zu printk format for ARRAY_SIZE()
Jonathan Neuschäfer <[email protected]>
pinctrl: nuvoton: npcm7xx: Rename DS() macro to DSTR()
Randy Dunlap <[email protected]>
net: sparx5: uses, depends on BRIDGE or !BRIDGE
Miaoqian Lin <[email protected]>
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
Chen-Yu Tsai <[email protected]>
pinctrl: pinconf-generic: Print arguments for bias-pull-*
Eric Dumazet <[email protected]>
watch_queue: Free the page array when watch_queue is dismantled
Herbert Xu <[email protected]>
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes
Robin Gong <[email protected]>
mailbox: imx: fix wakeup failure from freeze mode
David Howells <[email protected]>
rxrpc: Fix call timer start racing with call destruction
Xiaolong Huang <[email protected]>
rxrpc: fix some null-ptr-deref bugs in server_key.c
Guangbin Huang <[email protected]>
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
Yufeng Mo <[email protected]>
net: hns3: fix the concurrency between functions reading debugfs
Andrew Price <[email protected]>
gfs2: Make sure FITRIM minlen is rounded up to fs block size
Andreas Gruenbacher <[email protected]>
gfs2: gfs2_setattr_size error path fix
Tom Rix <[email protected]>
rtc: check if __rtc_read_time was successful
Masahiro Yamada <[email protected]>
modpost: restore the warning message for missing symbol versions
Matthew Wilcox (Oracle) <[email protected]>
XArray: Update the LRU list in xas_split()
Tom Rix <[email protected]>
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
Pavel Skripkin <[email protected]>
can: mcba_usb: properly check endpoint type
Hangyu Hua <[email protected]>
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
Matthew Wilcox (Oracle) <[email protected]>
XArray: Fix xas_create_range() when multi-order entry present
Jason A. Donenfeld <[email protected]>
wireguard: socket: ignore v6 endpoints when ipv6 is disabled
Wang Hai <[email protected]>
wireguard: socket: free skb in send6 when ipv6 is disabled
Jason A. Donenfeld <[email protected]>
wireguard: queueing: use CFI-safe ptr_ring cleanup function
Pankaj Raghav <[email protected]>
nvme: fix the read-only state for zoned namespaces with unsupposed features
Sungup Moon <[email protected]>
nvme: allow duplicate NSIDs for private namespaces
Baokun Li <[email protected]>
ubifs: rename_whiteout: correct old_dir size computing
Zhihao Cheng <[email protected]>
ubifs: Fix to add refcount once page is set private
Zhihao Cheng <[email protected]>
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
Zhihao Cheng <[email protected]>
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
Zhihao Cheng <[email protected]>
ubifs: Rectify space amount budget for mkdir/tmpfile operations
Zhihao Cheng <[email protected]>
ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work
Zhihao Cheng <[email protected]>
ubifs: Rename whiteout atomically
Zhihao Cheng <[email protected]>
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
Zhihao Cheng <[email protected]>
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
Zhihao Cheng <[email protected]>
ubifs: rename_whiteout: Fix double free for whiteout_ui->data
Yi Wang <[email protected]>
KVM: SVM: fix panic on out-of-bounds guest IRQ
Li RongQing <[email protected]>
KVM: x86: fix sending PV IPI
David Matlack <[email protected]>
KVM: Prevent module exit until all VMs are freed
Vitaly Kuznetsov <[email protected]>
KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
Vitaly Kuznetsov <[email protected]>
KVM: x86: Avoid theoretical NULL pointer dereference in kvm_irq_delivery_to_apic_fast()
Vitaly Kuznetsov <[email protected]>
KVM: x86: Check lapic_in_kernel() before attempting to set a SynIC irq
Gwendal Grignou <[email protected]>
platform: chrome: Split trace include file
Manish Rangankar <[email protected]>
scsi: qla2xxx: Use correct feature type field during RFF_ID processing
Quinn Tran <[email protected]>
scsi: qla2xxx: Reduce false trigger to login
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix stuck session of PRLI reject
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix N2N inconsistent PLOGI
Arun Easi <[email protected]>
scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix hang due to session stuck
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix incorrect reporting of task management failure
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix disk failure to rediscover
Saurav Kashyap <[email protected]>
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
Joe Carnuccio <[email protected]>
scsi: qla2xxx: Check for firmware dump already collected
Joe Carnuccio <[email protected]>
scsi: qla2xxx: Add devids and conditionals for 28xx
Joe Carnuccio <[email protected]>
scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters
Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix clang warning
Arun Easi <[email protected]>
scsi: qla2xxx: Fix device reconnect in loop topology
Nilesh Javali <[email protected]>
scsi: qla2xxx: Fix warning for missing error code
Bikash Hazarika <[email protected]>
scsi: qla2xxx: Fix wrong FDMI data for 64G adapter
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix premature hw access after PCI error
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix scheduling while atomic
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix warning message due to adisc being flushed
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix stuck session in gpdb
Saurav Kashyap <[email protected]>
scsi: qla2xxx: Implement ref count for SRB
Daniel Wagner <[email protected]>
scsi: qla2xxx: Refactor asynchronous command initialization
Ville Syrjälä <[email protected]>
drm/i915: Reject unsupported TMDS rates on ICL+
Ville Syrjälä <[email protected]>
drm/i915: Fix PSF GV point mask when SAGV is not possible
Ville Syrjälä <[email protected]>
drm/i915: Treat SAGV block time 0 as SAGV disabled
Kees Cook <[email protected]>
drm/dp: Fix off-by-one in register cache size
Anders Roxell <[email protected]>
powerpc: Fix build errors with newer binutils
Christophe Leroy <[email protected]>
powerpc: Add set_memory_{p/np}() and remove set_memory_attr()
Anders Roxell <[email protected]>
powerpc/lib/sstep: Fix build errors with newer binutils
Anders Roxell <[email protected]>
powerpc/lib/sstep: Fix 'sthcx' instruction
Chen Jingwen <[email protected]>
powerpc/kasan: Fix early region not updated correctly
Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: HVCALL_SEND_IPI_EX is an XMM fast hypercall
Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Fix the maximum number of sparse banks for XMM fast TLB flush hypercalls
Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_flush_tlb()
Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_send_ipi()
Sean Christopherson <[email protected]>
KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU
Sean Christopherson <[email protected]>
KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU
Sean Christopherson <[email protected]>
KVM: x86/mmu: Move "invalid" check out of kvm_tdp_mmu_get_root()
Paolo Bonzini <[email protected]>
KVM: x86: Reinitialize context if host userspace toggles EFER.LME
Matt Kramer <[email protected]>
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
Mauro Carvalho Chehab <[email protected]>
media: atomisp: fix bad usage at error handling logic
Ulf Hansson <[email protected]>
mmc: host: Return an error when ->enable_sdio_irq() ops is missing
Steven Rostedt (Google) <[email protected]>
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
Anthony I Gilea <[email protected]>
ASoC: Intel: sof_sdw: fix quirks for 2022 HP Spectre x360 13"
Dongliang Mu <[email protected]>
media: hdpvr: initialize dev->worker at hdpvr_register_videodev
Pavel Skripkin <[email protected]>
media: Revert "media: em28xx: add missing em28xx_close_extension"
Hans de Goede <[email protected]>
media: i2c: ov5648: Fix lockdep error
Zheyu Ma <[email protected]>
video: fbdev: sm712fb: Fix crash in smtcfb_write()
Vijendar Mukunda <[email protected]>
ASoC: amd: vg: fix for pm resume callback sequence
Uwe Kleine-König <[email protected]>
ARM: mmp: Fix failure to remove sram device
Richard Leitner <[email protected]>
ARM: tegra: tamonten: Fix I2C3 pad setting
Arnd Bergmann <[email protected]>
lib/test_lockup: fix kernel pointer check for separate address spaces
Arnd Bergmann <[email protected]>
uaccess: fix type mismatch warnings from access_ok()
Daniel González Cabanelas <[email protected]>
media: cx88-mpeg: clear interrupt status register before streaming video
Ming Qian <[email protected]>
media: imx-jpeg: fix a bug of accessing array out of bounds
Shengjiu Wang <[email protected]>
ASoC: soc-core: skip zero num_dai component in searching dai name
Richard Schleich <[email protected]>
ARM: dts: bcm2711: Add the missing L1/L2 cache information
Jing Yao <[email protected]>
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
Jing Yao <[email protected]>
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
Jing Yao <[email protected]>
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
Marcel Ziswiler <[email protected]>
arm64: defconfig: build imx-sdma as a module
Abel Vesa <[email protected]>
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
Ard Biesheuvel <[email protected]>
ARM: ftrace: avoid redundant loads or clobbering IP
Tsuchiya Yuto <[email protected]>
media: atomisp: fix dummy_ptr check to avoid duplicate active_bo
Hans de Goede <[email protected]>
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards
Charles Keepax <[email protected]>
ASoC: madera: Add dependencies on MFD
Richard Schleich <[email protected]>
ARM: dts: bcm2837: Add the missing L1/L2 cache information
David Heidelberg <[email protected]>
ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
Yang Guang <[email protected]>
video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
George Kennedy <[email protected]>
video: fbdev: cirrusfb: check pixclock to avoid divide by zero
Evgeny Novikov <[email protected]>
video: fbdev: w100fb: Reset global state
Tim Gardner <[email protected]>
video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
Yong Wu <[email protected]>
media: iommu/mediatek: Add device_link between the consumer and the larb devices
Yong Wu <[email protected]>
media: iommu/mediatek: Return ENODEV if the device is NULL
Yong Wu <[email protected]>
media: iommu/mediatek-v1: Free the existed fwspec if the master dev already has
Ranjani Sridharan <[email protected]>
ASoC: SOF: Intel: hda: Remove link assignment limitation
Mirela Rabulea <[email protected]>
media: imx-jpeg: Prevent decoding NV12M jpegs into single-planar buffers
Bard Liao <[email protected]>
ASoC: SOF: Intel: match sdw version on link_slaves_found
Lad Prabhakar <[email protected]>
ASoC: sh: rz-ssi: Make the data structures available before registering the handlers
Peiwei Hu <[email protected]>
media: ir_toy: free before error exiting
Eugen Hristev <[email protected]>
media: atmel: atmel-isc-base: report frame sizes as full supported range
Hans Verkuil <[email protected]>
media: staging: media: zoran: fix various V4L2 compliance errors
Corentin Labbe <[email protected]>
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com
Corentin Labbe <[email protected]>
media: staging: media: zoran: move videodev alloc
Dongliang Mu <[email protected]>
ntfs: add sanity check on allocation size
Rohith Surabattula <[email protected]>
Adjust cifssb maximum read size
Chao Yu <[email protected]>
f2fs: compress: fix to print raw data size in error path of lz4 decompression
Jaegeuk Kim <[email protected]>
f2fs: use spin_lock to avoid hang
Josef Bacik <[email protected]>
btrfs: make search_csum_tree return 0 if we get -EFBIG
Anand Jain <[email protected]>
btrfs: harden identification of a stale device
Jaegeuk Kim <[email protected]>
f2fs: don't get FREEZE lock in f2fs_evict_inode in frozen fs
Chuck Lever <[email protected]>
NFSD: Fix nfsd_breaker_owns_lease() return values
Chao Yu <[email protected]>
f2fs: fix to do sanity check on curseg->alloc_type
Theodore Ts'o <[email protected]>
ext4: don't BUG if someone dirty pages without asking ext4 first
Valentin Schneider <[email protected]>
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
Valentin Schneider <[email protected]>
sched/tracing: Don't re-read p->state when emitting sched_switch event
Ritesh Harjani <[email protected]>
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit
Ritesh Harjani <[email protected]>
ext4: correct cluster len and clusters changed accounting in ext4_mb_mark_bb
Waiman Long <[email protected]>
locking/lockdep: Iterate lock_classes directly when reading lockdep files
Mark Rutland <[email protected]>
atomics: Fix atomic64_{read_acquire,set_release} fallbacks
Minghao Chi <[email protected]>
spi: tegra20: Use of_device_get_match_data()
Chris Leech <[email protected]>
nvme-tcp: lockdep: annotate in-kernel sockets
John David Anglin <[email protected]>
parisc: Fix handling off probe non-access faults
Dmitry Baryshkov <[email protected]>
PM: core: keep irq flags in device_pm_check_callbacks()
Darren Hart <[email protected]>
ACPI/APEI: Limit printable size of BERT table data
Paolo Valente <[email protected]>
Revert "Revert "block, bfq: honor already-setup queue merges""
Paul Menzel <[email protected]>
lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3
Rafael J. Wysocki <[email protected]>
ACPICA: Avoid walking the ACPI Namespace if it is not there
Zhang Wensheng <[email protected]>
bfq: fix use-after-free in bfq_dispatch_request
Akira Kawata <[email protected]>
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
Souptick Joarder (HPE) <[email protected]>
irqchip/nvic: Release nvic_base upon failure
Marc Zyngier <[email protected]>
irqchip/qcom-pdc: Fix broken locking
Casey Schaufler <[email protected]>
Fix incorrect type in assignment of ipv6 port for audit
Chaitanya Kulkarni <[email protected]>
loop: use sysfs_emit() in the sysfs xxx show()
Richard Haines <[email protected]>
selinux: allow FIOCLEX and FIONCLEX with policy capability
Fangrui Song <[email protected]>
arm64: module: remove (NOLOAD) from linker script
Christian Göttsche <[email protected]>
selinux: use correct type for context length
Yu Kuai <[email protected]>
block, bfq: don't move oom_bfqq
Kai Ye <[email protected]>
crypto: hisilicon/sec - not need to enable sm4 extra mode at HW V3
Herbert Xu <[email protected]>
crypto: xts - Add softdep on ecb
Yahu Gao <[email protected]>
block/bfq_wf2q: correct weight to ioprio
Paul E. McKenney <[email protected]>
rcu: Mark writes to the rcu_segcblist structure's ->flags field
Marc Zyngier <[email protected]>
pinctrl: npcm: Fix broken references to chip->parent_device
Kees Cook <[email protected]>
gcc-plugins/stackleak: Exactly match strings instead of prefixes
Kai Ye <[email protected]>
crypto: hisilicon/qm - cleanup warning in qm_vf_read_qos
Dave Stevenson <[email protected]>
regulator: rpi-panel: Handle I2C errors/timing to the Atmel
Casey Schaufler <[email protected]>
LSM: general protection fault in legacy_parse_param
Linus Torvalds <[email protected]>
fs: fix fd table size alignment properly
Dan Carpenter <[email protected]>
lib/test: use after free in register_test_dev_kmod()
Linus Torvalds <[email protected]>
fs: fd tables have to be multiples of BITS_PER_LONG
Xiaomeng Tong <[email protected]>
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
Trond Myklebust <[email protected]>
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
Marcelo Ricardo Leitner <[email protected]>
net/sched: act_ct: fix ref leak when switching zones
Florian Westphal <[email protected]>
net: prefer nf_ct_put instead of nf_conntrack_put
Tom Rix <[email protected]>
octeontx2-af: initialize action variable
Zheng Yongjun <[email protected]>
net: sparx5: switchdev: fix possible NULL pointer dereference
Duoming Zhou <[email protected]>
net/x25: Fix null-ptr-deref caused by x25_disconnect
Tom Rix <[email protected]>
qlcnic: dcb: default to returning -EOPNOTSUPP
Randy Dunlap <[email protected]>
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
Peng Li <[email protected]>
net: hns3: clean residual vf config after disable sriov
Trond Myklebust <[email protected]>
NFS: Don't loop forever in nfs_do_recoalesce()
Ido Schimmel <[email protected]>
selftests: test_vxlan_under_vrf: Fix broken test case
Florian Fainelli <[email protected]>
net: phy: broadcom: Fix brcm_fet_config_init()
Jian Shen <[email protected]>
net: hns3: refine the process when PF set VF VLAN
Yufeng Mo <[email protected]>
net: hns3: format the output of the MAC address
Jian Shen <[email protected]>
net: hns3: add vlan list lock to protect vlan list
Jian Shen <[email protected]>
net: hns3: fix port base vlan add fail when concurrent with reset
Jian Shen <[email protected]>
net: hns3: fix bug when PF set the duplicate MAC address for VFs
Vladimir Oltean <[email protected]>
net: enetc: report software timestamping via SO_TIMESTAMPING
Juergen Gross <[email protected]>
xen: fix is_xen_pmu()
Maxime Ripard <[email protected]>
clk: Initialize orphan req_rate
Stefano Garzarella <[email protected]>
vsock/virtio: enable VQs early on probe
Stefano Garzarella <[email protected]>
vsock/virtio: read the negotiated features before using VQs
Stefano Garzarella <[email protected]>
vsock/virtio: initialize vdev->priv before using VQs
Konrad Dybcio <[email protected]>
clk: qcom: gcc-msm8994: Fix gpll4 width
Thomas Richter <[email protected]>
perf stat: Fix forked applications enablement of counters
Daniel Thompson <[email protected]>
kdb: Fix the putarea helper function
Olga Kornievskaia <[email protected]>
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error
Olga Kornievskaia <[email protected]>
SUNRPC don't resend a task on an offlined transport
Pablo Neira Ayuso <[email protected]>
netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
Pavel Skripkin <[email protected]>
jfs: fix divide error in dbNextAG
Randy Dunlap <[email protected]>
driver core: dd: fix return value of __setup handler
David Gow <[email protected]>
firmware: google: Properly state IOMEM dependency
Randy Dunlap <[email protected]>
kgdbts: fix return value of __setup handler
Xiaolong Huang <[email protected]>
virt: acrn: fix a memory leak in acrn_dev_ioctl()
Yonghua Huang <[email protected]>
virt: acrn: obtain pa from VMA with PFNMAP flag
Ilpo Järvinen <[email protected]>
serial: 8250: fix XOFF/XON sending when DMA is used
Randy Dunlap <[email protected]>
kgdboc: fix return value of __setup handler
Randy Dunlap <[email protected]>
tty: hvc: fix return value of __setup handler
Miaoqian Lin <[email protected]>
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
Miaoqian Lin <[email protected]>
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
Michael Walle <[email protected]>
pinctrl: microchip-sgpio: lock RMW access
Horatiu Vultur <[email protected]>
pinctrl: microchip sgpio: use reset driver
Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs
Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix pingroup pin config state readback
Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()
Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback
Miaoqian Lin <[email protected]>
pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix GB-PC2 devicetree
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix pinctrl properties for ethernet
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix formatting
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree
Alexey Khoroshilov <[email protected]>
NFS: remove unneeded check in decode_devicenotify_args()
Robin Gong <[email protected]>
mailbox: imx: fix crash in resume on i.mx8ulp
Miaoqian Lin <[email protected]>
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
Maxime Ripard <[email protected]>
clk: Fix clk_hw_get_clk() when dev is NULL
Jonathan Neuschäfer <[email protected]>
clk: clps711x: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer <[email protected]>
clk: hisilicon: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer <[email protected]>
clk: loongson1: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer <[email protected]>
clk: actions: Terminate clk_div_table with sentinel element
Dan Williams <[email protected]>
nvdimm/region: Fix default alignment for small regions
Miaoqian Lin <[email protected]>
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
Miaoqian Lin <[email protected]>
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
Miaoqian Lin <[email protected]>
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
Jie Hai <[email protected]>
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma
Taniya Das <[email protected]>
clk: qcom: clk-rcg2: Update the frac table for pixel clock
Taniya Das <[email protected]>
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
Codrin Ciubotariu <[email protected]>
clk: at91: sama7g5: fix parents of PDMCs' GCLK
Dan Carpenter <[email protected]>
clk: imx: off by one in imx_lpcg_parse_clks_from_dt()
Abel Vesa <[email protected]>
clk: imx7d: Remove audio_mclk_root_clk
Randy Dunlap <[email protected]>
dma-debug: fix return value of __setup handlers
Martin Kaiser <[email protected]>
staging: r8188eu: fix endless loop in recv_func
Trond Myklebust <[email protected]>
NFS: Return valid errors from nfs2/3_decode_dirent()
Jiasheng Jiang <[email protected]>
habanalabs: Add check for pci_enable_device
Jiasheng Jiang <[email protected]>
iio: adc: Add check for devm_request_threaded_irq
Uwe Kleine-König <[email protected]>
serial: 8250: Fix race condition in RTS-after-send handling
Trond Myklebust <[email protected]>
NFS: Use of mapping_set_error() results in spurious errors
Andy Shevchenko <[email protected]>
serial: 8250_lpss: Balance reference count for PCI DMA device
Andy Shevchenko <[email protected]>
serial: 8250_mid: Balance reference count for PCI DMA device
Rafał Miłecki <[email protected]>
phy: phy-brcm-usb: fixup BCM4908 support
Liu Ying <[email protected]>
phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})
Dirk Buchwalder <[email protected]>
clk: qcom: ipq8074: Use floor ops for SDCC1 clock
Geert Uytterhoeven <[email protected]>
pinctrl: renesas: checker: Fix miscalculation of number of states
Geert Uytterhoeven <[email protected]>
pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel
Jonathan Cameron <[email protected]>
staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
Zev Weiss <[email protected]>
serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
Hans de Goede <[email protected]>
iio: mma8452: Fix probe failing when an i2c_device_id is used
Dave Jiang <[email protected]>
dmaengine: idxd: restore traffic class defaults after wq reset
Dave Jiang <[email protected]>
dmaengine: idxd: change bandwidth token to read buffers
Dave Jiang <[email protected]>
dmaengine: idxd: check GENCAP config support for gencfg register
Robert Marko <[email protected]>
clk: qcom: ipq8074: fix PCI-E clock oops
Libin Yang <[email protected]>
soundwire: intel: fix wrong register name in intel_shim_wake
Luca Weiss <[email protected]>
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse
Christophe JAILLET <[email protected]>
misc: alcor_pci: Fix an error handling path
Christophe JAILLET <[email protected]>
fsi: Aspeed: Fix a potential double free
Robert Hancock <[email protected]>
pps: clients: gpio: Propagate return value from pps_gpio_probe
Uwe Kleine-König <[email protected]>
pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
Joel Stanley <[email protected]>
fsi: scom: Remove retries in indirect scoms
Joel Stanley <[email protected]>
fsi: scom: Fix error handling
Jiri Slaby <[email protected]>
mxser: fix xmit_buf leak in activate when LSR == 0xff
Michael Straube <[email protected]>
staging: r8188eu: release_firmware is not called if allocation fails
Phillip Potter <[email protected]>
staging: r8188eu: convert DBG_88E_LEVEL call in hal/rtl8188e_hal_init.c
Miaohe Lin <[email protected]>
kernel/resource: fix kfree() of bootmem memory again
Sondhauß, Jan <[email protected]>
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
Alexander Lobakin <[email protected]>
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
Alexander Lobakin <[email protected]>
ice: fix 'scheduling while atomic' on aux critical err interrupt
Miaoqian Lin <[email protected]>
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
Hoang Le <[email protected]>
tipc: fix the timer expires after interval 100ms
Vladimir Oltean <[email protected]>
net: dsa: fix panic on shutdown if multi-chip tree failed to probe
Aaron Conole <[email protected]>
openvswitch: always update flow key after nat
Jakub Kicinski <[email protected]>
tcp: ensure PMTU updates are processed during fastopen
Jeremy Linton <[email protected]>
net: bcmgenet: Use stronger register read/writes to assure ordering
Bjorn Helgaas <[email protected]>
PCI: Avoid broken MSI on SB600 USB devices
Hangbin Liu <[email protected]>
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
Michael Ellerman <[email protected]>
powerpc/pseries: Fix use after free in remove_phb_dynamic()
Peter Rosin <[email protected]>
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
Phil Sutter <[email protected]>
netfilter: conntrack: Add and use nf_ct_set_auto_assign_helper_warned()
Lucas Tanure <[email protected]>
i2c: meson: Fix wrong speed use from probe
Petr Machata <[email protected]>
af_netlink: Fix shift out of bounds in group mask calculation
Guillaume Nault <[email protected]>
ipv4: Fix route lookups when handling ICMP redirects and PMTU updates
Yake Yang <[email protected]>
Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt
Niels Dossche <[email protected]>
Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed
Pavel Skripkin <[email protected]>
Bluetooth: hci_uart: add missing NULL check in h5_enqueue
Jakub Sitnicki <[email protected]>
selftests/bpf: Fix error reporting from sock_fields programs
Kuniyuki Iwashima <[email protected]>
af_unix: Fix some data-races around unix_sk(sk)->oob_skb.
Sukadev Bhattiprolu <[email protected]>
ibmvnic: fix race between xmit and reset
Hangbin Liu <[email protected]>
bareudp: use ipv6_mod_enabled to check if IPv6 enabled
Oliver Hartkopp <[email protected]>
can: isotp: support MSG_TRUNC flag when reading from socket
Oliver Hartkopp <[email protected]>
can: isotp: return -EADDRNOTAVAIL when reading from unbound socket
Oliver Hartkopp <[email protected]>
can: isotp: sanitize CAN ID checks in isotp_bind()
Lorenzo Bianconi <[email protected]>
mt76: mt7921: fix mt7921_queues_acq implementation
Pablo Neira Ayuso <[email protected]>
netfilter: flowtable: Fix QinQ and pppoe support for inet table
José Roberto de Souza <[email protected]>
drm/i915/display: Fix HPD short pulse handling for eDP
Dan Carpenter <[email protected]>
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
Niklas Söderlund <[email protected]>
samples/bpf, xdpsock: Fix race when running for fix duration of time
Wang Yufen <[email protected]>
bpf, sockmap: Fix double uncharge the mem of sk_msg
Wang Yufen <[email protected]>
bpf, sockmap: Fix more uncharged while msg has more_data
Wang Yufen <[email protected]>
bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full
Wang Yufen <[email protected]>
bpf, sockmap: Fix memleak in sk_psock_queue_msg
Yongzhi Liu <[email protected]>
RDMA/mlx5: Fix memory leak in error flow for subscribe event routine
Leon Romanovsky <[email protected]>
Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error"
Dan Carpenter <[email protected]>
RDMA/irdma: Prevent some integer underflows
Linus Walleij <[email protected]>
power: ab8500_chargalg: Use CLOCK_MONOTONIC
Xin Xiong <[email protected]>
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
Yaliang Wang <[email protected]>
MIPS: pgalloc: fix memory leak caused by pgd_free()
Randy Dunlap <[email protected]>
MIPS: RB532: fix return value of __setup handler
Miaoqian Lin <[email protected]>
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
Miaoqian Lin <[email protected]>
ath10k: Fix error handling in ath10k_setup_msa_resources
Oliver Hartkopp <[email protected]>
vxcan: enable local echo for sent CAN frames
Hangyu Hua <[email protected]>
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
Sreekanth Reddy <[email protected]>
scsi: mpt3sas: Fix incorrect 4GB boundary check
Jia-Ju Bai <[email protected]>
platform/x86: huawei-wmi: check the return value of device_create_file()
Felix Maurer <[email protected]>
selftests/bpf: Make test_lwt_ip_encap more stable and faster
lic121 <[email protected]>
libbpf: Unmap rings when umem deleted
Jiasheng Jiang <[email protected]>
mfd: mc13xxx: Add check for mc13xxx_irq_request
Michael Ellerman <[email protected]>
powerpc/64s: Don't use DSISR for SLB faults
Jakob Koschel <[email protected]>
powerpc/sysdev: fix incorrect use to determine if list is empty
Maciej W. Rozycki <[email protected]>
MIPS: Sanitise Cavium switch cases in TLB handler synthesizers
Randy Dunlap <[email protected]>
mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n
Rob Clark <[email protected]>
drm/msm/a6xx: Fix missing ARRAY_SIZE() check
Robert Hancock <[email protected]>
net: axienet: fix RX ring refill allocation failure handling
Mark Tomlinson <[email protected]>
PCI: Reduce warnings on possible RW1C corruption
Yajun Deng <[email protected]>
RDMA/core: Fix ib_qp_usecnt_dec() called when error
Mike Marciniszyn <[email protected]>
IB/hfi1: Allow larger MTU without AIP
Jiasheng Jiang <[email protected]>
power: supply: wm8350-power: Add missing free in free_charger_irq
Jiasheng Jiang <[email protected]>
power: supply: wm8350-power: Handle error for wm8350_register_irq
Robert Hancock <[email protected]>
i2c: xiic: Make bus names unique
Anssi Hannula <[email protected]>
hv_balloon: rate-limit "Unhandled message" warning
Hou Wenlong <[email protected]>
KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
Zhenzhong Duan <[email protected]>
KVM: x86: Fix emulation in writing cr8
Michael Ellerman <[email protected]>
powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bit
Daniel Henrique Barboza <[email protected]>
powerpc/mm/numa: skip NUMA_NO_NODE onlining in parse_numa_properties()
Xu Kuohai <[email protected]>
libbpf: Skip forward declaration when counting duplicated type names
Christophe JAILLET <[email protected]>
gpu: host1x: Fix a memory leak in 'host1x_remove()'
Mustafa Ismail <[email protected]>
RDMA/irdma: Remove incorrect masking of PD
Mustafa Ismail <[email protected]>
RDMA/irdma: Fix Passthrough mode in VM
Mustafa Ismail <[email protected]>
RDMA/irdma: Fix netdev notifications for vlan's
Magnus Karlsson <[email protected]>
xsk: Fix race at socket teardown
Hou Tao <[email protected]>
bpf, arm64: Feed byte-offset into bpf line info
Hou Tao <[email protected]>
bpf, arm64: Call build_prologue() first in first JIT pass
Nishanth Menon <[email protected]>
drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt
Xiang Chen <[email protected]>
scsi: hisi_sas: Change permission of parameter prot_mask
Hans de Goede <[email protected]>
power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return
Miaoqian Lin <[email protected]>
drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
Zhang Yi <[email protected]>
ext2: correct max file size computing
Christophe JAILLET <[email protected]>
power: supply: sbs-charger: Don't cancel work that is not initialized
Randy Dunlap <[email protected]>
TOMOYO: fix __setup handlers return values
Maíra Canal <[email protected]>
drm/amd/display: Remove vupdate_int_entry definition
Aharon Landau <[email protected]>
RDMA/mlx5: Fix the flow of a miss in the allocation of a cache ODP MR
Damien Le Moal <[email protected]>
scsi: pm8001: Fix abort all task initialization
Damien Le Moal <[email protected]>
scsi: pm8001: Fix NCQ NON DATA command completion handling
Damien Le Moal <[email protected]>
scsi: pm8001: Fix NCQ NON DATA command task initialization
Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
Bart Van Assche <[email protected]>
scsi: fnic: Fix a tracing statement
Abhishek Sahu <[email protected]>
vfio/pci: wake-up devices around reset functions
Abhishek Sahu <[email protected]>
vfio/pci: fix memory leak during D3hot to D0 transition
Aashish Sharma <[email protected]>
dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS
Dmitry Baryshkov <[email protected]>
drm/msm/dpu: fix dp audio condition
Dmitry Baryshkov <[email protected]>
drm/msm/dpu: add DSPP blocks teardown
Dmitry Baryshkov <[email protected]>
drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode
Marijn Suijten <[email protected]>
drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent
Kuogee Hsieh <[email protected]>
drm/msm/dp: always add fail-safe mode into connector mode list
Kuogee Hsieh <[email protected]>
drm/msm/dp: stop link training after link training 2 failed
Kuogee Hsieh <[email protected]>
drm/msm/dp: populate connector of struct dp_panel
Amit Kumar Mahapatra <[email protected]>
mtd: rawnand: pl353: Set the nand chip node as the flash node
Dan Carpenter <[email protected]>
iwlwifi: mvm: Fix an error code in iwl_mvm_up()
Colin Ian King <[email protected]>
iwlwifi: Fix -EIO error code that is never returned
Rotem Saado <[email protected]>
iwlwifi: yoyo: remove DBGI_SRAM address reset writing
Johannes Berg <[email protected]>
iwlwifi: mvm: align locking in D3 test debugfs
Luca Coelho <[email protected]>
iwlwifi: mvm: don't iterate unadded vifs when handling FW SMPS req
Takashi Iwai <[email protected]>
iwlwifi: mvm: Don't call iwl_mvm_sta_from_mac80211() with NULL sta
Geliang Tang <[email protected]>
selftests: mptcp: add csum mib check for mptcp_connect
Tong Zhang <[email protected]>
dax: make sure inodes are flushed before destroy cache
Håkon Bugge <[email protected]>
IB/cma: Allow XRC INI QPs to set their local ACK timeout
Andrii Nakryiko <[email protected]>
libbpf: Fix memleak in libbpf_netlink_recv()
Roman Li <[email protected]>
drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug
Yiqing Yao <[email protected]>
drm/amd/pm: enable pm sysfs write for one VF mode
Yinjun Zhang <[email protected]>
bpftool: Fix the error when lookup in no-btf maps
Pin-Yen Lin <[email protected]>
drm/bridge: anx7625: Fix overflow issue on reading EDID
Jiasheng Jiang <[email protected]>
iommu/ipmmu-vmsa: Check for error num after setting mask
Dmitry Torokhov <[email protected]>
HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
Miaoqian Lin <[email protected]>
power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
Toke Høiland-Jørgensen <[email protected]>
libbpf: Use dynamically allocated buffer when receiving netlink messages
Neil Armstrong <[email protected]>
drm/bridge: dw-hdmi: use safe format when first in bridge chain
Andrii Nakryiko <[email protected]>
libbpf: Fix compilation warning due to mismatched printf format
Po Liu <[email protected]>
net:enetc: allocate CBD ring data memory using DMA coherent methods
Jonathan Cameron <[email protected]>
cxl/regs: Fix size of CXL Capability Header Register
Dan Williams <[email protected]>
cxl/core: Fix cxl_probe_component_regs() error message
Dan Carpenter <[email protected]>
libbpf: Fix signedness bug in btf_dump_array_data()
Xiao Yang <[email protected]>
RDMA/rxe: Check the last packet by RXE_END_MASK
Pali Rohár <[email protected]>
PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge
Pali Rohár <[email protected]>
PCI: aardvark: Fix reading MSI interrupt number
Corinna Vinschen <[email protected]>
igb: refactor XDP registration
Corinna Vinschen <[email protected]>
igc: avoid kernel warning when changing RX ring parameters
Mark Brown <[email protected]>
mtd: mchp48l640: Add SPI ID table
Mark Brown <[email protected]>
mtd: mchp23k256: Add SPI ID table
Christophe JAILLET <[email protected]>
i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()'
Lad Prabhakar <[email protected]>
i2c: bcm2835: Use platform_get_irq() to get the interrupt
Pavel Skripkin <[email protected]>
net: asix: add proper error handling of usb read errors
Christophe Leroy <[email protected]>
livepatch: Fix build failure on 32 bits processors
Thomas Bracht Laumann Jespersen <[email protected]>
scripts/dtc: Call pkg-config POSIXly correct
Johannes Berg <[email protected]>
mac80211: limit bandwidth in HE capabilities
Ilan Peer <[email protected]>
mac80211: Remove a couple of obsolete TODO
Tobias Waldekranz <[email protected]>
net: dsa: mv88e6xxx: Enable port policy support on 6097
Miroslav Lichvar <[email protected]>
ptp: unregister virtual clocks when unregistering physical clock.
Lorenzo Bianconi <[email protected]>
mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update
Lorenzo Bianconi <[email protected]>
mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update
Lorenzo Bianconi <[email protected]>
mt76: mt7615: fix a leftover race in runtime-pm
Lorenzo Bianconi <[email protected]>
mt76: mt7921: fix a leftover race in runtime-pm
Lorenzo Bianconi <[email protected]>
mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv
Lorenzo Bianconi <[email protected]>
mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode
Lorenzo Bianconi <[email protected]>
mt76: connac: fix sta_rec_wtbl tag len
Athira Rajeev <[email protected]>
powerpc/perf: Don't use perf_hw_context for trace IMC PMU
Fabiano Rosas <[email protected]>
KVM: PPC: Book3S HV: Check return value of kvmppc_radix_init
Maxim Kiselev <[email protected]>
powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch
Jiasheng Jiang <[email protected]>
ray_cs: Check ioremap return value
Miaoqian Lin <[email protected]>
power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe
Alexander Lobakin <[email protected]>
ixgbe: respect metadata on XSK Rx to skb
Alexander Lobakin <[email protected]>
ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
Alexander Lobakin <[email protected]>
ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly
Alexander Lobakin <[email protected]>
igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
Alexander Lobakin <[email protected]>
i40e: respect metadata on XSK Rx to skb
Alexander Lobakin <[email protected]>
i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
Gerhard Engleder <[email protected]>
selftests/net: timestamping: Fix bind_phc check
Fabiano Rosas <[email protected]>
KVM: PPC: Fix vmx/vsx mixup in mmio emulation
Maor Gottlieb <[email protected]>
RDMA/core: Set MR type in ib_reg_user_mr
Pavel Skripkin <[email protected]>
ath9k_htc: fix uninit value bugs
Hangbin Liu <[email protected]>
selftests/bpf/test_xdp_redirect_multi: use temp netns for testing
Andrii Nakryiko <[email protected]>
selftests/bpf: Normalize XDP section names in selftests
Robert Hancock <[email protected]>
net: phy: at803x: move page selection fix to config_init
Tom Rix <[email protected]>
drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function
Zhou Qingyang <[email protected]>
drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()
Zhou Qingyang <[email protected]>
drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()
Brett Creeley <[email protected]>
ionic: Don't send reset commands if FW isn't running
Shannon Nelson <[email protected]>
ionic: start watchdog after all is setup
Shannon Nelson <[email protected]>
ionic: fix type complaint in ionic_dev_cmd_clean()
Maxime Ripard <[email protected]>
drm/edid: Split deep color modes between RGB and YUV444
Maxime Ripard <[email protected]>
drm/edid: Don't clear formats if using deep color
Dario Binacchi <[email protected]>
mtd: rawnand: gpmi: fix controller timings setting
Jiasheng Jiang <[email protected]>
mtd: onenand: Check for error irq
Pavel Skripkin <[email protected]>
Bluetooth: hci_serdev: call init_rwsem() before p->open()
Tedd Ho-Jeong An <[email protected]>
Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products
Felix Maurer <[email protected]>
selftests: bpf: Fix bind on used port
José Expósito <[email protected]>
drm/selftests/test-drm_dp_mst_helper: Fix memory leak in sideband_msg_req_encode_decode
Kumar Kartikeya Dwivedi <[email protected]>
bpf: Fix UAF due to race between btf_try_get_module and load_module
Pavel Skripkin <[email protected]>
udmabuf: validate ubuf->pagecount
Wei Fu <[email protected]>
bpftool: Only set obj->skeleton on complete success
Yafang Shao <[email protected]>
libbpf: Fix possible NULL pointer dereference when destroying skeleton
Jiasheng Jiang <[email protected]>
drm/panfrost: Check for error num after setting mask
Jiasheng Jiang <[email protected]>
drm/v3d/v3d_drv: Check for error num after setting mask
Wen Gong <[email protected]>
ath10k: fix memory overwrite of the WoWLAN wakeup packet pattern
Jagan Teki <[email protected]>
drm: bridge: adv7511: Fix ADV7535 HPD enablement
Miaoqian Lin <[email protected]>
drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probe
Miaoqian Lin <[email protected]>
drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probe
Miaoqian Lin <[email protected]>
drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev
Martin Blumenstingl <[email protected]>
drm/meson: Fix error handling when afbcd.ops->init fails
Neil Armstrong <[email protected]>
drm/meson: split out encoder from meson_dw_hdmi
Cai Huoqing <[email protected]>
drm/meson: Make use of the helper function devm_platform_ioremap_resourcexxx()
Martin Blumenstingl <[email protected]>
drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops
Andre Przywara <[email protected]>
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx
Andre Przywara <[email protected]>
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS
Meng Tang <[email protected]>
ASoC: amd: Fix reference to PCM buffer address
Miaoqian Lin <[email protected]>
ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data
Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe
Miaoqian Lin <[email protected]>
ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe
Jiasheng Jiang <[email protected]>
mmc: davinci_mmc: Handle error for clk_enable
Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe
Kai Vehmanen <[email protected]>
ASoC: SOF: Intel: enable DMI L1 for playback streams
Wang Wensheng <[email protected]>
ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
Shengjiu Wang <[email protected]>
ASoC: fsl_spdif: Disable TX clock when stop
Miaoqian Lin <[email protected]>
ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
Codrin Ciubotariu <[email protected]>
ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
Miaoqian Lin <[email protected]>
ASoC: rk817: Fix missing clk_disable_unprepare() in rk817_platform_probe
Miaoqian Lin <[email protected]>
ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe
Tzung-Bi Shih <[email protected]>
ASoC: mediatek: use of_device_get_match_data()
Miaoqian Lin <[email protected]>
ASoC: SOF: Add missing of_node_put() in imx8m_probe
Miaoqian Lin <[email protected]>
ASoC: rockchip: i2s: Fix missing clk_disable_unprepare() in rockchip_i2s_probe
Miaoqian Lin <[email protected]>
ASoC: atmel: Fix error handling in snd_proto_probe
Hans Verkuil <[email protected]>
ivtv: fix incorrect device_caps for ivtvfb
Jakob Koschel <[email protected]>
media: saa7134: fix incorrect use to determine if list is empty
Miaoqian Lin <[email protected]>
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
Jiasheng Jiang <[email protected]>
ASoC: fsi: Add check for clk_enable
Jiasheng Jiang <[email protected]>
ASoC: wm8350: Handle error for wm8350_register_irq
Miaoqian Lin <[email protected]>
ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
Jiasheng Jiang <[email protected]>
media: vidtv: Check for null return of vzalloc
Dafna Hirschfeld <[email protected]>
media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED
Randy Dunlap <[email protected]>
m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined
Rob Herring <[email protected]>
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
Jia-Ju Bai <[email protected]>
memory: emif: check the pointer temp in get_device_details()
Jiasheng Jiang <[email protected]>
memory: emif: Add check for setup_interrupts
Jiasheng Jiang <[email protected]>
ASoC: soc-compress: prevent the potentially use of null pointer
Jiasheng Jiang <[email protected]>
ASoC: dwc-i2s: Handle errors for clk_enable
Jiasheng Jiang <[email protected]>
ASoC: atmel_ssc_dai: Handle errors for clk_enable
Jiasheng Jiang <[email protected]>
ASoC: mxs-saif: Handle errors for clk_enable
Randy Dunlap <[email protected]>
printk: fix return value of printk.devkmsg __setup handler
Frank Wunderlich <[email protected]>
arm64: dts: broadcom: Fix sata nodename
Kuldeep Singh <[email protected]>
arm64: dts: ns2: Fix spi-cpol and spi-cpha property
Jiasheng Jiang <[email protected]>
ALSA: spi: Add check for clk_enable()
Jiasheng Jiang <[email protected]>
ASoC: ti: davinci-i2s: Add check for clk_enable()
Aswath Govindraju <[email protected]>
mmc: sdhci_am654: Fix the driver data of AM64 SoC
Chun-Jie Chen <[email protected]>
soc: mediatek: pm-domains: Add wakeup capacity support in power domain
Jia-Ju Bai <[email protected]>
ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp()
Arnd Bergmann <[email protected]>
uaccess: fix nios2 and microblaze get_user_8()
Christophe Leroy <[email protected]>
vsprintf: Fix %pK with kptr_restrict == 0
Alexey Dobriyan <[email protected]>
lib: uninline simple_strntoull() as well
Muhammad Usama Anjum <[email protected]>
selftests/lkdtm: Add UBSAN config
Mirela Rabulea <[email protected]>
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
Nicolas Dufresne <[email protected]>
media: v4l2-core: Initialize h264 scaling matrix
Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: fix return value of wcd934x_rx_hph_mode_put
Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: fix kcontrol max values
Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd938x: fix kcontrol max values
Srinivas Kandagatla <[email protected]>
ASoC: codecs: wc938x: fix accessing array out of bounds for enum type
Srinivas Kandagatla <[email protected]>
ASoC: codecs: va-macro: fix accessing array out of bounds for enum type
Srinivas Kandagatla <[email protected]>
ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type
Srinivas Kandagatla <[email protected]>
ASoC: codecs: rx-macro: fix accessing compander for aux
Jernej Skrabec <[email protected]>
media: cedrus: h264: Fix neighbour info buffer size
Jernej Skrabec <[email protected]>
media: cedrus: H265: Fix neighbour info buffer size
Dan Carpenter <[email protected]>
media: usb: go7007: s2250-board: fix leak in probe()
Dongliang Mu <[email protected]>
media: em28xx: initialize refcount before kref_get
Zhou Qingyang <[email protected]>
media: ti-vpe: cal: Fix a NULL pointer dereference in cal_ctx_v4l2_init_formats()
Tom Rix <[email protected]>
media: video/hdmi: handle short reads of hdmi info frame.
Neil Armstrong <[email protected]>
media: mexon-ge2d: fixup frames size in registers
Marek Vasut <[email protected]>
ARM: dts: imx: Add missing LVDS decoder on M53Menlo
Andy Shevchenko <[email protected]>
vsprintf: Fix potential unaligned access
Ard Biesheuvel <[email protected]>
ARM: ftrace: ensure that ADR takes the Thumb bit into account
Paul Kocialkowski <[email protected]>
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order
Miaoqian Lin <[email protected]>
soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
Christophe JAILLET <[email protected]>
firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not defined
Maulik Shah <[email protected]>
arm64: dts: qcom: sm8350: Correct TCS configuration for apps rsc
Maulik Shah <[email protected]>
arm64: dts: qcom: sm8150: Correct TCS configuration for apps rsc
Rafał Miłecki <[email protected]>
arm64: dts: broadcom: bcm4908: use proper TWD binding
Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: sm8250: fix PCIe bindings to follow schema
David Heidelberg <[email protected]>
arm64: dts: qcom: sdm845: fix microphone bias properties and values
Daniel Thompson <[email protected]>
soc: qcom: aoss: remove spurious IRQF_ONESHOT flags
Miaoqian Lin <[email protected]>
soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem
Jiasheng Jiang <[email protected]>
soc: qcom: rpmpd: Check for null return of devm_kcalloc
Pavel Kubelun <[email protected]>
ARM: dts: qcom: ipq4019: fix sleep clock
Marijn Suijten <[email protected]>
firmware: qcom: scm: Remove reassignment to desc following initializer
Zev Weiss <[email protected]>
ARM: dts: Fix OpenBMC flash layout label addresses
Dan Carpenter <[email protected]>
video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
Dan Carpenter <[email protected]>
video: fbdev: atmel_lcdfb: fix an error code in atmel_lcdfb_probe()
Wang Hai <[email protected]>
video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
YueHaibing <[email protected]>
video: fbdev: controlfb: Fix COMPILE_TEST build
Z. Liu <[email protected]>
video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen
Jammy Huang <[email protected]>
media: aspeed: Correct value for h-total-pixels
Sakari Ailus <[email protected]>
media: ov5648: Don't pack controls struct
Sakari Ailus <[email protected]>
media: v4l: Avoid unaligned access warnings when printing 4cc modifiers
Janusz Krzysztofik <[email protected]>
media: ov6650: Fix set format try processing path
Chen-Yu Tsai <[email protected]>
media: hantro: Fix overfill bottom register field name
Jiasheng Jiang <[email protected]>
media: meson: vdec: potential dereference of null pointer
Miaoqian Lin <[email protected]>
media: coda: Fix missing put_device() call in coda_get_vdoa_data
Robert Hancock <[email protected]>
ASoC: simple-card-utils: Set sysclk on all components
Robert Hancock <[email protected]>
ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting
Jiasheng Jiang <[email protected]>
ASoC: codecs: Check for error pointer after calling devm_regmap_init_mmio
Lad Prabhakar <[email protected]>
ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively
Eugen Hristev <[email protected]>
media: atmel: atmel-sama7g5-isc: fix ispck leftover
Ondrej Zary <[email protected]>
media: bttv: fix WARNING regression on tunerless devices
Martin Kepplinger <[email protected]>
media: imx: imx8mq-mipi_csi2: fix system resume
Martin Kepplinger <[email protected]>
media: imx: imx8mq-mipi-csi2: remove wrong irq config write operation
Jiasheng Jiang <[email protected]>
media: mtk-vcodec: potential dereference of null pointer
Chen-Yu Tsai <[email protected]>
media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls
Laurent Pinchart <[email protected]>
media: staging: media: imx: imx7-mipi-csis: Make subdev name unique
Jonathan Marek <[email protected]>
media: camss: vfe-170: fix "VFE halt timeout" error
Jonathan Marek <[email protected]>
media: camss: csid-170: set the right HALT_CMD when disabled
Jonathan Marek <[email protected]>
media: camss: csid-170: don't enable unused irqs
Jonathan Marek <[email protected]>
media: camss: csid-170: fix non-10bit formats
Corentin Labbe <[email protected]>
media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size
Sam Protsenko <[email protected]>
pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios
Peng Liu <[email protected]>
kunit: make kunit_test_timeout compatible with comment
David Hildenbrand <[email protected]>
drivers/base/memory: add memory block to memory group after registration succeeded
Guillaume Tucker <[email protected]>
selftests, x86: fix how check_cc.sh is being invoked
Fengnan Chang <[email protected]>
f2fs: fix compressed file start atomic write may cause data corruption
Filipe Manana <[email protected]>
btrfs: fix unexpected error path when reflinking an inline extent
Chao Yu <[email protected]>
f2fs: fix to avoid potential deadlock
Valentin Schneider <[email protected]>
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
Chengming Zhou <[email protected]>
sched/cpuacct: Fix charge percpu cpuusage
Amir Goldstein <[email protected]>
nfsd: more robust allocation failure handling in nfsd_file_cache_init
Jaegeuk Kim <[email protected]>
f2fs: fix missing free nid in f2fs_handle_failed_inode
Mel Gorman <[email protected]>
sched/fair: Improve consistency of allowed NUMA balance calculations
Adrian Hunter <[email protected]>
perf/x86/intel/pt: Fix address filter config for 32-bit kernel
Adrian Hunter <[email protected]>
perf/core: Fix address filter parser for multiple filters
Mathieu Desnoyers <[email protected]>
rseq: Remove broken uapi field layout on 32-bit little endian
Qais Yousef <[email protected]>
sched/uclamp: Fix iowait boost escaping uclamp restriction
Qais Yousef <[email protected]>
sched/core: Export pelt_thermal_tp
Bharata B Rao <[email protected]>
sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
Chao Yu <[email protected]>
f2fs: fix to enable ATGC correctly via gc_idle sysfs interface
David Howells <[email protected]>
watch_queue: Actually free the watch
David Howells <[email protected]>
watch_queue: Fix NULL dereference in error cleanup
Jens Axboe <[email protected]>
io_uring: terminate manual loop iterator loop correctly for non-vecs
Jens Axboe <[email protected]>
io_uring: don't check unrelated req->open.how in accept request
Randy Dunlap <[email protected]>
clocksource: acpi_pm: fix return value of __setup handler
Brandon Wyman <[email protected]>
hwmon: (pmbus) Add Vin unit off handling
Miaoqian Lin <[email protected]>
hwrng: nomadik - Change clk_disable to clk_disable_unprepare
Jianglei Nie <[email protected]>
crypto: ccree - Fix use after free in cc_cipher_exit()
Dāvis Mosāns <[email protected]>
crypto: ccp - ccp_dmaengine_unregister release dma channels
Randy Dunlap <[email protected]>
ACPI: APEI: fix return value of __setup handlers
Dave Kleikamp <[email protected]>
KEYS: trusted: Avoid calling null function trusted_key_exit
Andreas Rammhold <[email protected]>
KEYS: trusted: Fix trusted key backends when building as module
Mark Rutland <[email protected]>
arm64: prevent instrumentation of bp hardening callbacks
Guillaume Ranquet <[email protected]>
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()
Claudiu Beznea <[email protected]>
clocksource/drivers/timer-microchip-pit64b: Use notrace
Krzysztof Kozlowski <[email protected]>
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts
Marek Szyprowski <[email protected]>
clocksource/drivers/exynos_mct: Refactor resources allocation
Drew Fustini <[email protected]>
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix
Petr Vorel <[email protected]>
crypto: vmx - add missing dependencies
Corentin Labbe <[email protected]>
crypto: gemini - call finalize with bh disabled
Corentin Labbe <[email protected]>
crypto: amlogic - call finalize with bh disabled
Corentin Labbe <[email protected]>
crypto: sun8i-ce - call finalize with bh disabled
Corentin Labbe <[email protected]>
crypto: sun8i-ss - call finalize with bh disabled
Claudiu Beznea <[email protected]>
hwrng: atmel - disable trng on failure path
Jiasheng Jiang <[email protected]>
spi: spi-zynqmp-gqspi: Handle error for dma_set_mask
Randy Dunlap <[email protected]>
PM: suspend: fix return value of __setup handler
Randy Dunlap <[email protected]>
PM: hibernate: fix __setup handler error handling
Eric Biggers <[email protected]>
block: don't delete queue kobject before its children
Christoph Hellwig <[email protected]>
nvme: fix the check for duplicate unique identifiers
Christoph Hellwig <[email protected]>
nvme: cleanup __nvme_check_ids
Armin Wolf <[email protected]>
hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
Patrick Rudolph <[email protected]>
hwmon: (pmbus) Add mutex to regulator ops
Andy Shevchenko <[email protected]>
spi: pxa2xx-pci: Balance reference count for PCI DMA device
Kai Ye <[email protected]>
crypto: hisilicon/sec - fix the aead software fallback for engine
Gilad Ben-Yossef <[email protected]>
crypto: ccree - don't attempt 0 len DMA mappings
Randy Dunlap <[email protected]>
EVM: fix the evm= __setup handler return value
Richard Guy Briggs <[email protected]>
audit: log AUDIT_TIME_* records only from rules
Corentin Labbe <[email protected]>
crypto: rockchip - ECB does not need IV
Muhammad Usama Anjum <[email protected]>
selftests/sgx: Treat CC as one argument
Muhammad Usama Anjum <[email protected]>
selftests/x86: Add validity check and allow field splitting
Chengming Zhou <[email protected]>
blk-cgroup: set blkg iostat after percpu stat aggregation
Jianyong Wu <[email protected]>
arm64/mm: avoid fixmap race condition when create pud mapping
Marco Elver <[email protected]>
stack: Constrain and fix stack offset randomization with Clang builds
Miaoqian Lin <[email protected]>
spi: tegra210-quad: Fix missin IRQ check in tegra_qspi_probe
Miaoqian Lin <[email protected]>
spi: tegra114: Add missing IRQ check in tegra_spi_probe
Shijith Thotton <[email protected]>
crypto: octeontx2 - remove CONFIG_DM_CRYPT check
Jiasheng Jiang <[email protected]>
thermal: int340x: Check for NULL after calling kmemdup()
Scott Mayhew <[email protected]>
selinux: Fix selinux_sb_mnt_opts_compat()
Tomas Paukrt <[email protected]>
crypto: mxs-dcp - Fix scatterlist processing
Herbert Xu <[email protected]>
crypto: authenc - Fix sleep in atomic context in decrypt_tail
Corentin Labbe <[email protected]>
crypto: sun8i-ss - really disable hash on A80
Geert Uytterhoeven <[email protected]>
hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDER
Sunil Goutham <[email protected]>
hwrng: cavium - Check health status while reading random data
Peter Gonda <[email protected]>
crypto: ccp - Ensure psp_ret is always init'd in __sev_platform_init_locked()
Christian Göttsche <[email protected]>
selinux: check return value of sel_make_avc_files
GONG, Ruiqi <[email protected]>
selinux: access superblock_security_struct in LSM blob way
kernel test robot <[email protected]>
regulator: qcom_smd: fix for_each_child.cocci warnings
Marc Zyngier <[email protected]>
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
Liguang Zhang <[email protected]>
PCI: pciehp: Clear cmd_busy bit in polling mode
Fabio Estevam <[email protected]>
PCI: imx6: Allow to probe when dw_pcie_wait_for_link() fails
Mastan Katragadda <[email protected]>
drm/i915/gem: add missing boundary check in vm_access
Jani Nikula <[email protected]>
drm/i915/opregion: check port number bounds for SWSCI display power state
Hector Martin <[email protected]>
brcmfmac: pcie: Fix crashes due to early IRQs
Hector Martin <[email protected]>
brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
Hector Martin <[email protected]>
brcmfmac: pcie: Declare missing firmware files in pcie.c
Hector Martin <[email protected]>
brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path
Hector Martin <[email protected]>
brcmfmac: firmware: Allocate space for default boardrev in nvram
Thomas Zimmermann <[email protected]>
drm/fb-helper: Mark screen buffers in system memory with FBINFO_VIRTFB
Lyude Paul <[email protected]>
drm/nouveau/backlight: Just set all backlight types as RAW
Lyude Paul <[email protected]>
drm/nouveau/backlight: Fix LVDS backlight detection on some laptops
Christian König <[email protected]>
drm/syncobj: flatten dma_fence_chains on transfer
Max Filippov <[email protected]>
xtensa: fix xtensa_wsr always writing 0
Max Filippov <[email protected]>
xtensa: fix stop_machine_cpuslocked call in patch_text
Max Filippov <[email protected]>
xtensa: define update_mmu_tlb function
Qu Wenruo <[email protected]>
btrfs: verify the tranisd of the to-be-written dirty extent buffer
Niels Dossche <[email protected]>
btrfs: extend locking to all space_info members accesses
Naohiro Aota <[email protected]>
btrfs: zoned: mark relocation as writing
Johan Hovold <[email protected]>
media: davinci: vpif: fix unbalanced runtime PM enable
Johan Hovold <[email protected]>
media: davinci: vpif: fix unbalanced runtime PM get
Stanimir Varbanov <[email protected]>
media: venus: venc: Fix h264 8x8 transform control
Stanimir Varbanov <[email protected]>
media: venus: hfi_cmds: List HDR10 property as unsupported for v1 and v3
Sean Young <[email protected]>
media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PC
Maciej W. Rozycki <[email protected]>
DEC: Limit PMAX memory probing to R3k systems
Shawn Guo <[email protected]>
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
Mingzhe Zou <[email protected]>
bcache: fixup multiple threads crash
Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - fix buffer overread in pkcs1pad_verify_complete()
Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - restore signature length check
Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - correctly get hash from source scatterlist
Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - only allow with rsa
Kees Cook <[email protected]>
exec: Force single empty string when argv is empty
Dirk Müller <[email protected]>
lib/raid6/test: fix multiple definition linking error
Srinivas Pandruvada <[email protected]>
thermal: int340x: Increase bitmap size
Jann Horn <[email protected]>
pstore: Don't use semaphores in always-atomic-context code
Colin Ian King <[email protected]>
carl9170: fix missing bit-wise or operator for tx_params
Jocelyn Falempe <[email protected]>
mgag200 fix memmapsl configuration in GCTL6 register
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add missing HDMI supplies on SMDK5420
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add missing HDMI supplies on SMDK5250
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
Tudor Ambarus <[email protected]>
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
Tudor Ambarus <[email protected]>
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
Johannes Berg <[email protected]>
rfkill: make new event layout opt-in
Michael Schmitz <[email protected]>
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
Helge Deller <[email protected]>
video: fbdev: sm712fb: Fix crash in smtcfb_read()
Thomas Zimmermann <[email protected]>
fbdev: Hot-unplug firmware fb devices on forced removal
Cooper Chiou <[email protected]>
drm/edid: check basic audio support on CEA extension block
Tejun Heo <[email protected]>
block: don't merge across cgroup boundaries if blkcg is enabled
Shin'ichiro Kawasaki <[email protected]>
block: limit request dispatch loop duration
Pekka Pessi <[email protected]>
mailbox: tegra-hsp: Flush whole channel
Christian Brauner <[email protected]>
landlock: Use square brackets around "landlock-ruleset"
Tom Rix <[email protected]>
samples/landlock: Fix path_list memory leak
Duoming Zhou <[email protected]>
drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
Ojaswin Mujoo <[email protected]>
ext4: make mb_optimize_scan performance mount option work with extents
Ye Bin <[email protected]>
ext4: fix fs corruption when tring to remove a non-empty directory with IO error
Ritesh Harjani <[email protected]>
ext4: fix ext4_fc_stats trace point
Jann Horn <[email protected]>
coredump: Also dump first pages of non-executable ELF libraries
Sakari Ailus <[email protected]>
ACPI: properties: Consistently return -ENOENT if there are no more references
Rafael J. Wysocki <[email protected]>
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
Ammar Faizi <[email protected]>
ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am64: Fix gic-v3 compatible regs
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs
Manivannan Sadhasivam <[email protected]>
arm64: dts: qcom: sm8250: Fix MSI IRQ for PCIe1 and PCIe2
Vijay Balakrishna <[email protected]>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
David Engraf <[email protected]>
arm64: signal: nofpsimd: Do not allocate fp/simd context when not available
Ben Dooks <[email protected]>
PCI: fu740: Force 2.5GT/s for initial device probe
Andreas Gruenbacher <[email protected]>
powerpc/kvm: Fix kvm_use_magic_page
Lars Ellenberg <[email protected]>
drbd: fix potential silent data corruption
Steven Rostedt (Google) <[email protected]>
tracing: Have trace event string test handle zero length strings
Mikulas Patocka <[email protected]>
dm integrity: set journal entry unused when shrinking device
Mike Snitzer <[email protected]>
dm: fix double accounting of flush with data
Mike Snitzer <[email protected]>
dm: interlock pending dm_io and dm_wait_for_bios_completion
Kirill Tkhai <[email protected]>
dm: fix use-after-free in dm_cleanup_zoned_dev()
Mike Snitzer <[email protected]>
dm stats: fix too short end duration_ns when using precise_timestamps
Kuan-Ying Lee <[email protected]>
mm/kmemleak: reset tag when compare object pointer
Rik van Riel <[email protected]>
mm,hwpoison: unmap poisoned page before invalidation
Charan Teja Kalla <[email protected]>
Revert "mm: madvise: skip unmapped vma holes passed to process_madvise"
Charan Teja Kalla <[email protected]>
mm: madvise: return correct bytes advised with process_madvise
Charan Teja Kalla <[email protected]>
mm: madvise: skip unmapped vma holes passed to process_madvise
Hans de Goede <[email protected]>
drm/simpledrm: Add "panel orientation" property on non-upright mounted LCD panels
Joseph Qi <[email protected]>
ocfs2: fix crash when mount with quota enabled
Ali Pouladi <[email protected]>
rtc: pl031: fix rtc features null pointer dereference
Mateusz Jończyk <[email protected]>
rtc: mc146818-lib: fix locking in mc146818_set_time
Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
Takashi Iwai <[email protected]>
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
Mohan Kumar <[email protected]>
ALSA: hda: Avoid unsol event during RPM suspending
Xiaomeng Tong <[email protected]>
ALSA: cs4236: fix an incorrect NULL check on list iterator
Paulo Alcantara <[email protected]>
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
Paulo Alcantara <[email protected]>
cifs: prevent bad output lengths in smb2_ioctl_query_info()
José Expósito <[email protected]>
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
Dmitry Vyukov <[email protected]>
riscv: Increase stack size under KASAN
Nikita Shubin <[email protected]>
riscv: Fix fill_callchain return value
Niklas Cassel <[email protected]>
riscv: dts: canaan: Fix SPI3 bus width
Manish Chopra <[email protected]>
qed: validate and restrict untrusted VFs vlan promisc mode
Manish Chopra <[email protected]>
qed: display VF trust config
Damien Le Moal <[email protected]>
scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
James Smart <[email protected]>
scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters
Adrian Hunter <[email protected]>
scsi: ufs: Fix runtime PM messages never-ending cycle
Adrian Hunter <[email protected]>
scsi: core: sd: Add silence_suspend flag to suppress some PM messages
Hugh Dickins <[email protected]>
mempolicy: mbind_range() set_policy() after vma_merge()
Rik van Riel <[email protected]>
mm: invalidate hwpoison page cache page in fault path
Alistair Popple <[email protected]>
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
Minchan Kim <[email protected]>
mm: fs: fix lru_cache_disabled race in bh_lru
Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_scan_medium
Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_do_mount_fs
Baokun Li <[email protected]>
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
Hangyu Hua <[email protected]>
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
Marc Kleine-Budde <[email protected]>
can: m_can: m_can_tx_handler(): fix use after free of skb
Hangyu Hua <[email protected]>
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
Sean Nyekjaer <[email protected]>
mtd: rawnand: protect access to rawnand devices while in suspend
Miquel Raynal <[email protected]>
spi: mxic: Fix the transmit path
Damien Le Moal <[email protected]>
net: bnxt_ptp: fix compilation error
Krzysztof Kozlowski <[email protected]>
pinctrl: samsung: drop pin banks references on error paths
Aidan MacDonald <[email protected]>
pinctrl: ingenic: Fix regmap on X series SoCs
Miaohe Lin <[email protected]>
mm/mlock: fix two bugs in user_shm_lock()
Alistair Delva <[email protected]>
remoteproc: Fix count check in rproc_coredump_write()
Chao Yu <[email protected]>
f2fs: fix to do sanity check on .cp_pack_total_block_count
Juhyung Park <[email protected]>
f2fs: quota: fix loop condition at f2fs_quota_sync()
Chao Yu <[email protected]>
f2fs: fix to unlock page correctly in error path of is_alive()
Dan Carpenter <[email protected]>
NFSD: prevent integer overflow on 32 bit systems
Dan Carpenter <[email protected]>
NFSD: prevent underflow in nfssvc_decode_writeargs()
Trond Myklebust <[email protected]>
NFS: NFSv2/v3 clients should never be setting NFS_CAP_XATTR
NeilBrown <[email protected]>
SUNRPC: avoid race between mod_timer() and del_timer_sync()
Gwendal Grignou <[email protected]>
HID: intel-ish-hid: Use dma_alloc_coherent for firmware update
Johan Hovold <[email protected]>
firmware: sysfb: fix platform-device leak in error path
Ang Tien Sung <[email protected]>
firmware: stratix10-svc: add missing callback parameter on RSU
Bagas Sanjaya <[email protected]>
Documentation: update stable tree link
Bagas Sanjaya <[email protected]>
Documentation: add link to stable release candidate tree
Eric Biggers <[email protected]>
KEYS: asymmetric: properly validate hash_algo and encoding
Eric Biggers <[email protected]>
KEYS: asymmetric: enforce that sig algo matches key algo
Eric Biggers <[email protected]>
KEYS: fix length validation in keyctl_pkey_params_get_2()
Ronnie Sahlberg <[email protected]>
cifs: we do not need a spinlock around the tree access during umount
Ronnie Sahlberg <[email protected]>
cifs: fix handlecache and multiuser
Jann Horn <[email protected]>
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Kunihiko Hayashi <[email protected]>
clk: uniphier: Fix fixed-rate initialization
Quentin Schulz <[email protected]>
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
Dan Carpenter <[email protected]>
greybus: svc: fix an error handling bug in gb_svc_hello()
Liam Beguin <[email protected]>
iio: inkern: make a best effort on offset calculation
Liam Beguin <[email protected]>
iio: inkern: apply consumer scale when no channel scale is available
Liam Beguin <[email protected]>
iio: inkern: apply consumer scale on IIO_VAL_INT cases
Liam Beguin <[email protected]>
iio: afe: rescale: use s64 for temporary scale calculations
Miaoqian Lin <[email protected]>
coresight: syscfg: Fix memleak on registration failure in cscfg_create_device
James Clark <[email protected]>
coresight: Fix TRCCONFIGR.QE sysfs interface
Akira Yokosawa <[email protected]>
docs: sphinx/requirements: Limit jinja2<3.1
Paul Davey <[email protected]>
bus: mhi: Fix MHI DMA structure endianness
Yonglin Tan <[email protected]>
bus: mhi: pci_generic: Add mru_default for Quectel EM1xx series
Alexander Usyskin <[email protected]>
mei: avoid iterator usage outside of list_for_each_entry
Alexander Usyskin <[email protected]>
mei: me: add Alder Lake N device id.
Alexander Usyskin <[email protected]>
mei: me: disable driver on the ign firmware
Anssi Hannula <[email protected]>
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()
Mathias Nyman <[email protected]>
xhci: make xhci_handshake timeout for xhci_reset() adjustable
Henry Lin <[email protected]>
xhci: fix runtime PM imbalance in USB2 resume
Anssi Hannula <[email protected]>
xhci: fix garbage USBSTS being logged in some cases
Alan Stern <[email protected]>
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
Sven Peter <[email protected]>
usb: typec: tipd: Forward plug orientation to typec subsystem
Lino Sanfilippo <[email protected]>
tpm: fix reference counting for struct tpm_chip
Xie Yongji <[email protected]>
virtio-blk: Use blk_validate_block_size() to validate block size
Robin Murphy <[email protected]>
iommu/iova: Improve 32-bit free space estimate
Alex Deucher <[email protected]>
drm/amdgpu: only check for _PR3 on dGPUs
Alex Deucher <[email protected]>
drm/amdgpu: move PX checking into amdgpu_device_ip_early_init
Waiman Long <[email protected]>
locking/lockdep: Avoid potential access of invalid memory in lock_class
Yosry Ahmed <[email protected]>
selftests: vm: fix clang build error multiple output files
Claudiu Beznea <[email protected]>
net: dsa: microchip: add spi_device_id tables
Haimin Zhang <[email protected]>
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
Linus Walleij <[email protected]>
Input: zinitix - do not report shadow fingers
Biju Das <[email protected]>
spi: Fix erroneous sgs value with min_t()
Bartosz Golaszewski <[email protected]>
Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"
Minghao Chi (CGEL ZTE) <[email protected]>
net:mcf8390: Use platform_get_irq() to get the interrupt
Biju Das <[email protected]>
spi: Fix invalid sgs value
Marcelo Roberto Jimenez <[email protected]>
gpio: Revert regression in sysfs-gpio (gpiolib.c)
Zheyu Ma <[email protected]>
ethernet: sun: Free the coherent when failing in probing
Stefano Garzarella <[email protected]>
tools/virtio: fix virtio_test execution
Si-Wei Liu <[email protected]>
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
Michael S. Tsirkin <[email protected]>
virtio_console: break out of buf poll on remove
Daniel Palmer <[email protected]>
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
Lina Wang <[email protected]>
xfrm: fix tunnel model fragmentation behavior
Michael Hübner <[email protected]>
HID: Add support for open wheel and no attachment to T300
Lucas Zampieri <[email protected]>
HID: logitech-dj: add new lightspeed receiver id
Randy Dunlap <[email protected]>
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
Muchun Song <[email protected]>
mm: kfence: fix missing objcg housekeeping for SLAB
Johan Hovold <[email protected]>
USB: serial: simple: add Nokia phone driver
Johan Hovold <[email protected]>
USB: serial: pl2303: fix GS type detection
Krzysztof Kozlowski <[email protected]>
dt-bindings: usb: hcd: correct usb-device path
Eddie James <[email protected]>
USB: serial: pl2303: add IBM device IDs
Linus Torvalds <[email protected]>
Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
-------------
Diffstat:
Documentation/ABI/testing/sysfs-fs-f2fs | 1 +
Documentation/admin-guide/kernel-parameters.txt | 3 +-
Documentation/admin-guide/sysctl/kernel.rst | 1 +
.../memory-controllers/mediatek,smi-larb.yaml | 1 -
.../devicetree/bindings/mtd/nand-controller.yaml | 4 +-
.../bindings/pinctrl/microchip,sparx5-sgpio.yaml | 2 +-
.../bindings/spi/nvidia,tegra210-quad.yaml | 2 +-
Documentation/devicetree/bindings/spi/spi-mxic.txt | 4 +-
Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 +-
Documentation/process/stable-kernel-rules.rst | 11 +-
Documentation/sound/hd-audio/models.rst | 4 +
Documentation/sphinx/requirements.txt | 2 +
Makefile | 4 +-
arch/Kconfig | 1 +
arch/arc/kernel/process.c | 2 +-
arch/arm/boot/dts/bcm2711.dtsi | 50 +++
arch/arm/boot/dts/bcm2837.dtsi | 49 +++
arch/arm/boot/dts/dra7-l4.dtsi | 5 +-
arch/arm/boot/dts/dra7.dtsi | 8 +-
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +
arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +
arch/arm/boot/dts/imx53-m53menlo.dts | 29 +-
arch/arm/boot/dts/imx7-colibri.dtsi | 4 +-
arch/arm/boot/dts/imx7-mba7.dtsi | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 4 +-
arch/arm/boot/dts/imx7d-pico-pi.dts | 4 +-
arch/arm/boot/dts/imx7d-sdb.dts | 4 +-
arch/arm/boot/dts/imx7s-warp.dts | 4 +-
arch/arm/boot/dts/openbmc-flash-layout-64.dtsi | 2 +-
arch/arm/boot/dts/openbmc-flash-layout.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 3 +-
arch/arm/boot/dts/qcom-msm8960.dtsi | 8 +-
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
arch/arm/boot/dts/sama7g5.dtsi | 6 -
arch/arm/boot/dts/spear1340.dtsi | 6 +-
arch/arm/boot/dts/spear13xx.dtsi | 6 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 22 +-
arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +-
arch/arm/configs/multi_v5_defconfig | 2 +
arch/arm/crypto/Kconfig | 2 +
arch/arm/kernel/entry-ftrace.S | 53 +--
arch/arm/kernel/swp_emulate.c | 2 +-
arch/arm/kernel/traps.c | 2 +-
arch/arm/mach-iop32x/include/mach/entry-macro.S | 2 +-
arch/arm/mach-iop32x/include/mach/irqs.h | 2 +-
arch/arm/mach-iop32x/irq.c | 6 +-
arch/arm/mach-iop32x/irqs.h | 60 +--
arch/arm/mach-mmp/sram.c | 22 +-
arch/arm/mach-mstar/Kconfig | 1 +
arch/arm/mach-s3c/mach-jive.c | 6 +-
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 +-
.../arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 8 +-
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 16 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 4 +-
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-am64.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-am65.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
arch/arm64/configs/defconfig | 2 +-
arch/arm64/include/asm/module.lds.h | 6 +-
arch/arm64/include/asm/spectre.h | 3 +-
arch/arm64/kernel/proton-pack.c | 9 +-
arch/arm64/kernel/signal.c | 10 +-
arch/arm64/mm/init.c | 36 +-
arch/arm64/mm/mmu.c | 41 +-
arch/arm64/net/bpf_jit_comp.c | 18 +-
arch/csky/kernel/perf_callchain.c | 2 +-
arch/csky/kernel/signal.c | 2 +-
arch/m68k/coldfire/device.c | 6 +-
arch/microblaze/include/asm/uaccess.h | 18 +-
arch/mips/dec/int-handler.S | 6 +-
arch/mips/dec/prom/Makefile | 2 +-
arch/mips/dec/setup.c | 3 +-
arch/mips/include/asm/dec/prom.h | 15 +-
arch/mips/include/asm/pgalloc.h | 6 +
arch/mips/mm/tlbex.c | 23 +-
arch/mips/rb532/devices.c | 6 +-
arch/nios2/include/asm/uaccess.h | 26 +-
arch/nios2/kernel/signal.c | 20 +-
arch/parisc/include/asm/traps.h | 1 +
arch/parisc/kernel/traps.c | 2 +
arch/parisc/mm/fault.c | 89 ++++
arch/powerpc/Makefile | 2 +-
arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 30 ++
arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 +-
arch/powerpc/include/asm/io.h | 40 +-
arch/powerpc/include/asm/set_memory.h | 12 +-
arch/powerpc/include/asm/uaccess.h | 3 +
arch/powerpc/kernel/kvm.c | 2 +-
arch/powerpc/kvm/book3s_hv.c | 5 +-
arch/powerpc/kvm/powerpc.c | 4 +-
arch/powerpc/lib/sstep.c | 12 +-
arch/powerpc/mm/fault.c | 14 +-
arch/powerpc/mm/kasan/kasan_init_32.c | 3 +-
arch/powerpc/mm/numa.c | 4 +-
arch/powerpc/mm/pageattr.c | 39 +-
arch/powerpc/mm/pgtable_32.c | 24 +-
arch/powerpc/perf/imc-pmu.c | 6 +-
arch/powerpc/platforms/8xx/pic.c | 1 +
arch/powerpc/platforms/powernv/rng.c | 6 +-
arch/powerpc/platforms/pseries/pci_dlpar.c | 4 +
arch/powerpc/sysdev/fsl_gtm.c | 4 +-
arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +
arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts | 2 +
arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +
arch/riscv/boot/dts/canaan/sipeed_maixduino.dts | 2 +
arch/riscv/include/asm/module.lds.h | 6 +-
arch/riscv/include/asm/thread_info.h | 10 +-
arch/riscv/kernel/perf_callchain.c | 6 +-
arch/sparc/kernel/signal_32.c | 2 +-
arch/um/drivers/mconsole_kern.c | 3 +-
arch/x86/events/intel/pt.c | 2 +-
arch/x86/kernel/kvm.c | 2 +-
arch/x86/kvm/emulate.c | 14 +-
arch/x86/kvm/hyperv.c | 96 +++--
arch/x86/kvm/lapic.c | 9 +-
arch/x86/kvm/mmu.h | 1 +
arch/x86/kvm/mmu/paging_tmpl.h | 77 ++--
arch/x86/kvm/mmu/tdp_mmu.c | 52 ++-
arch/x86/kvm/mmu/tdp_mmu.h | 3 -
arch/x86/kvm/svm/avic.c | 10 +-
arch/x86/kvm/x86.c | 3 +-
arch/x86/xen/pmu.c | 10 +-
arch/x86/xen/pmu.h | 3 +-
arch/x86/xen/smp_pv.c | 2 +-
arch/xtensa/include/asm/pgtable.h | 4 +
arch/xtensa/include/asm/processor.h | 4 +-
arch/xtensa/kernel/jump_label.c | 2 +-
arch/xtensa/mm/tlb.c | 6 +
block/bfq-cgroup.c | 6 +
block/bfq-iosched.c | 31 +-
block/bfq-wf2q.c | 2 +-
block/blk-cgroup.c | 10 +-
block/blk-merge.c | 11 +
block/blk-mq-sched.c | 9 +-
block/blk-sysfs.c | 8 +-
block/genhd.c | 2 +-
crypto/asymmetric_keys/pkcs7_verify.c | 6 -
crypto/asymmetric_keys/public_key.c | 126 ++++--
crypto/asymmetric_keys/x509_public_key.c | 6 -
crypto/authenc.c | 2 +-
crypto/rsa-pkcs1pad.c | 11 +-
crypto/xts.c | 1 +
drivers/acpi/acpica/nswalk.c | 3 +
drivers/acpi/apei/bert.c | 10 +-
drivers/acpi/apei/erst.c | 2 +-
drivers/acpi/apei/hest.c | 2 +-
drivers/acpi/bus.c | 27 +-
drivers/acpi/cppc_acpi.c | 5 +
drivers/acpi/property.c | 2 +-
drivers/base/dd.c | 2 +-
drivers/base/memory.c | 8 +-
drivers/base/power/domain.c | 2 +-
drivers/base/power/main.c | 6 +-
drivers/block/drbd/drbd_req.c | 3 +-
drivers/block/loop.c | 10 +-
drivers/block/n64cart.c | 2 +-
drivers/block/virtio_blk.c | 12 +-
drivers/bluetooth/btintel.c | 11 +-
drivers/bluetooth/btintel.h | 1 +
drivers/bluetooth/btmtksdio.c | 4 +-
drivers/bluetooth/btusb.c | 6 +
drivers/bluetooth/hci_h5.c | 8 +-
drivers/bluetooth/hci_serdev.c | 3 +-
drivers/bus/mhi/core/debugfs.c | 26 +-
drivers/bus/mhi/core/init.c | 36 +-
drivers/bus/mhi/core/internal.h | 119 +++---
drivers/bus/mhi/core/main.c | 22 +-
drivers/bus/mhi/core/pm.c | 4 +-
drivers/bus/mhi/pci_generic.c | 1 +
drivers/bus/mips_cdmm.c | 1 +
drivers/char/hw_random/Kconfig | 2 +-
drivers/char/hw_random/atmel-rng.c | 1 +
drivers/char/hw_random/cavium-rng-vf.c | 194 ++++++++-
drivers/char/hw_random/cavium-rng.c | 11 +-
drivers/char/hw_random/nomadik-rng.c | 4 +-
drivers/char/tpm/tpm-chip.c | 46 +-
drivers/char/tpm/tpm.h | 2 +
drivers/char/tpm/tpm2-space.c | 65 +++
drivers/char/virtio_console.c | 7 +
drivers/clk/actions/owl-s700.c | 1 +
drivers/clk/actions/owl-s900.c | 2 +-
drivers/clk/at91/sama7g5.c | 8 +-
drivers/clk/clk-clps711x.c | 2 +
drivers/clk/clk.c | 16 +-
drivers/clk/hisilicon/clk-hi3559a.c | 4 +-
drivers/clk/imx/clk-imx7d.c | 1 -
drivers/clk/imx/clk-imx8qxp-lpcg.c | 2 +-
drivers/clk/loongson1/clk-loongson1c.c | 1 +
drivers/clk/qcom/clk-rcg2.c | 14 +-
drivers/clk/qcom/gcc-ipq8074.c | 21 +-
drivers/clk/qcom/gcc-msm8994.c | 1 +
drivers/clk/rockchip/clk.c | 3 +
drivers/clk/tegra/clk-tegra124-emc.c | 1 +
drivers/clk/uniphier/clk-uniphier-fixed-rate.c | 1 +
drivers/clocksource/acpi_pm.c | 6 +-
drivers/clocksource/exynos_mct.c | 60 ++-
drivers/clocksource/timer-microchip-pit64b.c | 2 +-
drivers/clocksource/timer-of.c | 6 +-
drivers/clocksource/timer-ti-dm-systimer.c | 4 +-
drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 +-
.../crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c | 3 +
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c | 3 +
.../crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 3 +
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c | 2 +
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 3 +
drivers/crypto/amlogic/amlogic-gxl-cipher.c | 2 +
drivers/crypto/ccp/ccp-dmaengine.c | 16 +
drivers/crypto/ccp/sev-dev.c | 2 +-
drivers/crypto/ccree/cc_buffer_mgr.c | 7 +
drivers/crypto/ccree/cc_cipher.c | 2 +-
drivers/crypto/gemini/sl3516-ce-cipher.c | 2 +
drivers/crypto/hisilicon/qm.c | 2 +-
drivers/crypto/hisilicon/sec2/sec_crypto.c | 16 +-
drivers/crypto/hisilicon/sec2/sec_main.c | 8 +-
drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c | 17 +-
drivers/crypto/mxs-dcp.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 1 -
drivers/crypto/vmx/Kconfig | 4 +
drivers/cxl/core/regs.c | 6 +-
drivers/dax/super.c | 1 +
drivers/dma-buf/udmabuf.c | 4 +
drivers/dma/hisi_dma.c | 2 +-
drivers/dma/idxd/device.c | 34 +-
drivers/dma/idxd/idxd.h | 12 +-
drivers/dma/idxd/init.c | 6 +-
drivers/dma/idxd/registers.h | 14 +-
drivers/dma/idxd/sysfs.c | 42 +-
drivers/firmware/efi/efi-pstore.c | 2 +-
drivers/firmware/google/Kconfig | 2 +-
drivers/firmware/qcom_scm.c | 6 -
drivers/firmware/stratix10-svc.c | 2 +-
drivers/firmware/sysfb_simplefb.c | 23 +-
drivers/fsi/fsi-master-aspeed.c | 17 +-
drivers/fsi/fsi-scom.c | 45 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 15 +
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 11 -
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +-
.../amd/display/dc/irq/dcn21/irq_service_dcn21.c | 14 -
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 4 +-
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +-
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 29 +-
drivers/gpu/drm/bridge/analogix/anx7625.c | 3 +-
drivers/gpu/drm/bridge/cdns-dsi.c | 1 +
drivers/gpu/drm/bridge/nwl-dsi.c | 1 +
drivers/gpu/drm/bridge/sil-sii8620.c | 2 +-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 5 +-
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1 +
drivers/gpu/drm/drm_edid.c | 18 +-
drivers/gpu/drm/drm_fb_helper.c | 9 +-
drivers/gpu/drm/drm_syncobj.c | 61 ++-
drivers/gpu/drm/i915/display/intel_bw.c | 3 +-
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
drivers/gpu/drm/i915/display/intel_hdmi.c | 13 +-
drivers/gpu/drm/i915/display/intel_opregion.c | 15 +
drivers/gpu/drm/i915/display/intel_pps.c | 6 +-
drivers/gpu/drm/i915/display/intel_pps.h | 2 +-
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
drivers/gpu/drm/i915/intel_pm.c | 10 +-
drivers/gpu/drm/meson/Makefile | 1 +
drivers/gpu/drm/meson/meson_drv.c | 31 +-
drivers/gpu/drm/meson/meson_dw_hdmi.c | 345 +--------------
drivers/gpu/drm/meson/meson_encoder_hdmi.c | 370 +++++++++++++++++
drivers/gpu/drm/meson/meson_encoder_hdmi.h | 12 +
drivers/gpu/drm/meson/meson_osd_afbcd.c | 41 +-
drivers/gpu/drm/meson/meson_osd_afbcd.h | 1 +
drivers/gpu/drm/mgag200/mgag200_mode.c | 5 +-
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 8 +
drivers/gpu/drm/msm/dp/dp_ctrl.c | 3 +
drivers/gpu/drm/msm/dp/dp_display.c | 5 +
drivers/gpu/drm/msm/dp/dp_panel.c | 5 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 26 +-
drivers/gpu/drm/nouveau/nouveau_backlight.c | 6 +-
drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c | 9 +-
drivers/gpu/drm/panfrost/panfrost_gpu.c | 5 +-
drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c | 4 +-
drivers/gpu/drm/tegra/dsi.c | 4 +-
drivers/gpu/drm/tiny/simpledrm.c | 3 +
drivers/gpu/drm/v3d/v3d_drv.c | 8 +-
drivers/gpu/host1x/dev.c | 1 +
drivers/greybus/svc.c | 8 +-
drivers/hid/hid-logitech-dj.c | 1 +
drivers/hid/hid-thrustmaster.c | 2 +
drivers/hid/i2c-hid/i2c-hid-core.c | 32 +-
drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 29 +-
drivers/hv/Kconfig | 1 +
drivers/hv/hv_balloon.c | 2 +-
drivers/hwmon/pmbus/pmbus.h | 1 +
drivers/hwmon/pmbus/pmbus_core.c | 18 +-
drivers/hwmon/sch56xx-common.c | 2 +-
.../hwtracing/coresight/coresight-etm4x-sysfs.c | 8 +-
drivers/hwtracing/coresight/coresight-syscfg.c | 2 +-
drivers/i2c/busses/i2c-bcm2835.c | 26 +-
drivers/i2c/busses/i2c-meson.c | 12 +-
drivers/i2c/busses/i2c-xiic.c | 3 +-
drivers/i2c/muxes/i2c-demux-pinctrl.c | 5 +-
drivers/iio/accel/mma8452.c | 29 +-
drivers/iio/adc/twl6030-gpadc.c | 2 +
drivers/iio/afe/iio-rescale.c | 8 +-
drivers/iio/inkern.c | 40 +-
drivers/infiniband/core/cma.c | 2 +-
drivers/infiniband/core/verbs.c | 1 +
drivers/infiniband/hw/hfi1/verbs.c | 3 +-
drivers/infiniband/hw/irdma/ctrl.c | 10 +-
drivers/infiniband/hw/irdma/hw.c | 2 +-
drivers/infiniband/hw/irdma/i40iw_if.c | 1 +
drivers/infiniband/hw/irdma/main.c | 1 +
drivers/infiniband/hw/irdma/main.h | 1 +
drivers/infiniband/hw/irdma/utils.c | 48 ++-
drivers/infiniband/hw/irdma/verbs.c | 4 +-
drivers/infiniband/hw/mlx5/devx.c | 4 +-
drivers/infiniband/hw/mlx5/mr.c | 2 +
drivers/infiniband/sw/rxe/rxe_resp.c | 10 +-
drivers/input/input.c | 6 -
drivers/input/touchscreen/zinitix.c | 44 +-
drivers/iommu/dma-iommu.c | 155 ++++---
drivers/iommu/iova.c | 5 +-
drivers/iommu/ipmmu-vmsa.c | 4 +-
drivers/iommu/mtk_iommu.c | 32 +-
drivers/iommu/mtk_iommu_v1.c | 40 +-
drivers/irqchip/irq-nvic.c | 2 +
drivers/irqchip/qcom-pdc.c | 5 +-
drivers/mailbox/imx-mailbox.c | 11 +-
drivers/mailbox/tegra-hsp.c | 5 +
drivers/md/bcache/btree.c | 6 +-
drivers/md/bcache/writeback.c | 6 +-
drivers/md/dm-core.h | 2 +
drivers/md/dm-crypt.c | 2 +-
drivers/md/dm-integrity.c | 6 +-
drivers/md/dm-stats.c | 34 +-
drivers/md/dm-stats.h | 11 +-
drivers/md/dm.c | 86 ++--
drivers/media/i2c/adv7511-v4l2.c | 2 +-
drivers/media/i2c/adv7604.c | 2 +-
drivers/media/i2c/adv7842.c | 2 +-
drivers/media/i2c/ov5640.c | 14 +-
drivers/media/i2c/ov5648.c | 12 +-
drivers/media/i2c/ov6650.c | 115 +++--
drivers/media/pci/bt8xx/bttv-driver.c | 4 +-
drivers/media/pci/cx88/cx88-mpeg.c | 3 +
drivers/media/pci/ivtv/ivtv-driver.h | 1 -
drivers/media/pci/ivtv/ivtv-ioctl.c | 10 +-
drivers/media/pci/ivtv/ivtv-streams.c | 11 +-
drivers/media/pci/saa7134/saa7134-alsa.c | 4 +-
drivers/media/platform/aspeed-video.c | 9 +-
drivers/media/platform/atmel/atmel-isc-base.c | 22 +-
drivers/media/platform/atmel/atmel-sama7g5-isc.c | 6 -
drivers/media/platform/coda/coda-common.c | 1 +
drivers/media/platform/davinci/vpif.c | 12 +-
drivers/media/platform/imx-jpeg/mxc-jpeg.c | 7 +-
drivers/media/platform/meson/ge2d/ge2d.c | 24 +-
.../media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c | 2 +
drivers/media/platform/qcom/camss/camss-csid-170.c | 19 +-
drivers/media/platform/qcom/camss/camss-vfe-170.c | 12 +-
drivers/media/platform/qcom/venus/hfi_cmds.c | 2 +
drivers/media/platform/qcom/venus/venc.c | 4 +-
drivers/media/platform/qcom/venus/venc_ctrls.c | 6 +-
drivers/media/platform/ti-vpe/cal-video.c | 3 +
drivers/media/rc/gpio-ir-tx.c | 28 +-
drivers/media/rc/ir_toy.c | 2 +-
drivers/media/test-drivers/vidtv/vidtv_s302m.c | 17 +-
drivers/media/usb/em28xx/em28xx-cards.c | 13 +-
drivers/media/usb/go7007/s2250-board.c | 10 +-
drivers/media/usb/hdpvr/hdpvr-video.c | 4 +-
drivers/media/usb/stk1160/stk1160-core.c | 2 +-
drivers/media/usb/stk1160/stk1160-v4l.c | 10 +-
drivers/media/usb/stk1160/stk1160.h | 2 +-
drivers/media/v4l2-core/v4l2-ctrls-core.c | 10 +
drivers/media/v4l2-core/v4l2-ioctl.c | 12 +-
drivers/media/v4l2-core/v4l2-mem2mem.c | 53 ++-
drivers/memory/emif.c | 8 +-
drivers/mfd/asic3.c | 10 +-
drivers/mfd/mc13xxx-core.c | 4 +-
drivers/misc/cardreader/alcor_pci.c | 9 +-
drivers/misc/habanalabs/common/debugfs.c | 2 +
drivers/misc/kgdbts.c | 4 +-
drivers/misc/mei/hw-me-regs.h | 2 +
drivers/misc/mei/hw-me.c | 23 +-
drivers/misc/mei/interrupt.c | 35 +-
drivers/misc/mei/pci-me.c | 1 +
drivers/mmc/core/host.c | 15 +-
drivers/mmc/host/davinci_mmc.c | 6 +-
drivers/mmc/host/rtsx_pci_sdmmc.c | 20 +-
drivers/mmc/host/sdhci_am654.c | 24 +-
drivers/mtd/devices/mchp23k256.c | 14 +
drivers/mtd/devices/mchp48l640.c | 10 +
drivers/mtd/nand/onenand/generic.c | 7 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 3 +
drivers/mtd/nand/raw/nand_base.c | 44 +-
drivers/mtd/nand/raw/pl35x-nand-controller.c | 2 +-
drivers/mtd/ubi/build.c | 9 +-
drivers/mtd/ubi/fastmap.c | 28 +-
drivers/mtd/ubi/vmt.c | 8 +-
drivers/net/bareudp.c | 19 +-
drivers/net/can/m_can/m_can.c | 5 +-
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
drivers/net/can/usb/ems_usb.c | 1 -
drivers/net/can/usb/mcba_usb.c | 27 +-
drivers/net/can/usb/usb_8dev.c | 30 +-
drivers/net/can/vxcan.c | 2 +-
drivers/net/dsa/bcm_sf2_cfp.c | 6 +-
drivers/net/dsa/microchip/ksz8795_spi.c | 11 +
drivers/net/dsa/microchip/ksz9477_spi.c | 12 +
drivers/net/dsa/mv88e6xxx/chip.c | 1 +
drivers/net/ethernet/8390/mcf8390.c | 10 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c | 6 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h | 2 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 +-
.../net/ethernet/freescale/enetc/enetc_ethtool.c | 5 +-
drivers/net/ethernet/freescale/enetc/enetc_qos.c | 128 +++---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 18 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 15 +-
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.h | 1 -
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 47 ++-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 234 ++++++++---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 4 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 12 +-
drivers/net/ethernet/ibm/ibmvnic.c | 63 ++-
drivers/net/ethernet/ibm/ibmvnic.h | 7 +-
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 16 +-
drivers/net/ethernet/intel/ice/ice.h | 2 +
drivers/net/ethernet/intel/ice/ice_idc.c | 3 +
drivers/net/ethernet/intel/ice/ice_main.c | 25 +-
drivers/net/ethernet/intel/igb/igb_ethtool.c | 4 -
drivers/net/ethernet/intel/igb/igb_main.c | 19 +-
drivers/net/ethernet/intel/igc/igc_main.c | 16 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 27 +-
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 15 +-
drivers/net/ethernet/microchip/sparx5/Kconfig | 2 +
.../net/ethernet/microchip/sparx5/sparx5_fdma.c | 2 +
.../net/ethernet/pensando/ionic/ionic_bus_pci.c | 4 +-
drivers/net/ethernet/pensando/ionic/ionic_dev.c | 20 +-
drivers/net/ethernet/pensando/ionic/ionic_dev.h | 1 +
drivers/net/ethernet/pensando/ionic/ionic_main.c | 24 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 29 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 1 +
drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h | 10 +-
drivers/net/ethernet/sun/sunhme.c | 6 +-
drivers/net/ethernet/ti/cpsw_ethtool.c | 6 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 72 ++--
drivers/net/hamradio/6pack.c | 4 +-
drivers/net/phy/at803x.c | 40 +-
drivers/net/phy/broadcom.c | 21 +
drivers/net/usb/asix.h | 4 +-
drivers/net/usb/asix_common.c | 19 +-
drivers/net/usb/asix_devices.c | 21 +-
drivers/net/wireguard/queueing.c | 3 +-
drivers/net/wireguard/socket.c | 5 +-
drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
drivers/net/wireless/ath/ath10k/wow.c | 7 +-
drivers/net/wireless/ath/ath9k/htc_hst.c | 5 +
drivers/net/wireless/ath/carl9170/main.c | 2 +-
.../broadcom/brcm80211/brcmfmac/firmware.c | 2 +
.../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 73 ++--
.../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 -
drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c | 2 +-
drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 2 -
drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 2 -
drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 +
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 +-
drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 3 +-
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 5 +-
drivers/net/wireless/mediatek/mt76/mt7603/main.c | 3 +
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 8 +
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 +
.../net/wireless/mediatek/mt76/mt76_connac_mcu.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 9 +-
.../net/wireless/mediatek/mt76/mt7921/debugfs.c | 13 +-
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 8 +
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 11 +-
drivers/net/wireless/ray_cs.c | 6 +
drivers/nvdimm/region_devs.c | 3 +
drivers/nvme/host/core.c | 48 ++-
drivers/nvme/host/multipath.c | 7 +-
drivers/nvme/host/nvme.h | 19 +
drivers/nvme/host/tcp.c | 40 ++
drivers/pci/access.c | 9 +-
drivers/pci/controller/dwc/pci-imx6.c | 10 +-
drivers/pci/controller/dwc/pcie-fu740.c | 51 ++-
drivers/pci/controller/pci-aardvark.c | 13 +-
drivers/pci/controller/pci-xgene.c | 2 +-
drivers/pci/hotplug/pciehp_hpc.c | 2 +
drivers/pci/quirks.c | 12 +
drivers/phy/broadcom/phy-brcm-usb-init.c | 36 ++
drivers/phy/broadcom/phy-brcm-usb-init.h | 1 +
drivers/phy/broadcom/phy-brcm-usb.c | 11 +-
drivers/phy/phy-core-mipi-dphy.c | 4 +-
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 2 +
drivers/pinctrl/mediatek/pinctrl-paris.c | 30 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 4 +-
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 185 ++++-----
drivers/pinctrl/pinconf-generic.c | 6 +-
drivers/pinctrl/pinctrl-ingenic.c | 46 +-
drivers/pinctrl/pinctrl-microchip-sgpio.c | 22 +
drivers/pinctrl/pinctrl-rockchip.c | 2 +
drivers/pinctrl/renesas/core.c | 5 +-
drivers/pinctrl/renesas/pfc-r8a77470.c | 4 +-
drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 2 -
drivers/pinctrl/samsung/pinctrl-samsung.c | 30 +-
drivers/platform/chrome/Makefile | 3 +-
drivers/platform/chrome/cros_ec_sensorhub_ring.c | 3 +-
drivers/platform/chrome/cros_ec_sensorhub_trace.h | 123 ++++++
drivers/platform/chrome/cros_ec_trace.h | 95 -----
drivers/platform/chrome/cros_ec_typec.c | 6 +
drivers/platform/x86/huawei-wmi.c | 13 +-
drivers/power/reset/gemini-poweroff.c | 4 +-
drivers/power/supply/ab8500_chargalg.c | 4 +-
drivers/power/supply/ab8500_fg.c | 4 +-
drivers/power/supply/bq24190_charger.c | 7 +-
drivers/power/supply/sbs-charger.c | 18 +-
drivers/power/supply/wm8350_power.c | 97 ++++-
drivers/pps/clients/pps-gpio.c | 2 +-
drivers/ptp/ptp_clock.c | 11 +-
drivers/pwm/pwm-lpc18xx-sct.c | 20 +-
drivers/regulator/qcom_smd-regulator.c | 4 +-
drivers/regulator/rpi-panel-attiny-regulator.c | 56 ++-
drivers/remoteproc/qcom_q6v5_adsp.c | 1 +
drivers/remoteproc/qcom_q6v5_mss.c | 11 +-
drivers/remoteproc/qcom_wcnss.c | 1 +
drivers/remoteproc/remoteproc_debugfs.c | 2 +-
drivers/rtc/interface.c | 7 +-
drivers/rtc/rtc-mc146818-lib.c | 6 +-
drivers/rtc/rtc-pl031.c | 6 +-
drivers/scsi/fnic/fnic_scsi.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
drivers/scsi/libsas/sas_ata.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 25 +-
drivers/scsi/pm8001/pm8001_hwi.c | 23 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 209 +++++-----
drivers/scsi/qla2xxx/qla_attr.c | 7 +-
drivers/scsi/qla2xxx/qla_bsg.c | 6 +-
drivers/scsi/qla2xxx/qla_def.h | 21 +-
drivers/scsi/qla2xxx/qla_edif.c | 25 +-
drivers/scsi/qla2xxx/qla_gbl.h | 4 +-
drivers/scsi/qla2xxx/qla_gs.c | 160 +++----
drivers/scsi/qla2xxx/qla_init.c | 233 ++++++-----
drivers/scsi/qla2xxx/qla_inline.h | 2 +
drivers/scsi/qla2xxx/qla_iocb.c | 93 +++--
drivers/scsi/qla2xxx/qla_isr.c | 1 +
drivers/scsi/qla2xxx/qla_mbx.c | 29 +-
drivers/scsi/qla2xxx/qla_mid.c | 9 +-
drivers/scsi/qla2xxx/qla_mr.c | 11 +-
drivers/scsi/qla2xxx/qla_nvme.c | 22 +
drivers/scsi/qla2xxx/qla_os.c | 32 +-
drivers/scsi/qla2xxx/qla_sup.c | 4 +-
drivers/scsi/qla2xxx/qla_target.c | 14 +-
drivers/scsi/qla2xxx/qla_tmpl.c | 9 +-
drivers/scsi/scsi_error.c | 9 +-
drivers/scsi/scsi_transport_fc.c | 39 +-
drivers/scsi/sd.c | 6 +-
drivers/scsi/ufs/ufshcd.c | 21 +-
drivers/soc/mediatek/mtk-pm-domains.c | 3 +
drivers/soc/qcom/ocmem.c | 1 +
drivers/soc/qcom/qcom_aoss.c | 2 +-
drivers/soc/qcom/rpmpd.c | 3 +
drivers/soc/ti/wkup_m3_ipc.c | 4 +-
drivers/soundwire/dmi-quirks.c | 2 +-
drivers/soundwire/intel.c | 4 +-
drivers/spi/spi-mt65xx.c | 15 +-
drivers/spi/spi-mxic.c | 28 +-
drivers/spi/spi-pxa2xx-pci.c | 17 +-
drivers/spi/spi-tegra114.c | 4 +
drivers/spi/spi-tegra20-slink.c | 8 +-
drivers/spi/spi-tegra210-quad.c | 2 +
drivers/spi/spi-zynqmp-gqspi.c | 5 +-
drivers/spi/spi.c | 4 +-
drivers/staging/iio/adc/ad7280a.c | 4 +-
drivers/staging/media/atomisp/pci/atomisp_acc.c | 28 +-
.../media/atomisp/pci/atomisp_gmin_platform.c | 18 +
drivers/staging/media/atomisp/pci/hmm/hmm.c | 7 +-
drivers/staging/media/hantro/hantro_h1_jpeg_enc.c | 2 +-
drivers/staging/media/hantro/hantro_h1_regs.h | 2 +-
drivers/staging/media/imx/imx7-mipi-csis.c | 6 +-
drivers/staging/media/imx/imx8mq-mipi-csi2.c | 74 ++--
drivers/staging/media/meson/vdec/esparser.c | 7 +-
drivers/staging/media/meson/vdec/vdec_helpers.c | 8 +-
drivers/staging/media/meson/vdec/vdec_helpers.h | 4 +-
drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 2 +-
drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 2 +-
drivers/staging/media/zoran/zoran.h | 2 +-
drivers/staging/media/zoran/zoran_card.c | 86 ++--
drivers/staging/media/zoran/zoran_device.c | 7 +-
drivers/staging/media/zoran/zoran_driver.c | 18 +-
drivers/staging/mt7621-dts/gbpc1.dts | 40 +-
drivers/staging/mt7621-dts/gbpc2.dts | 116 +++++-
drivers/staging/mt7621-dts/mt7621.dtsi | 26 +-
drivers/staging/r8188eu/core/rtw_recv.c | 3 +-
drivers/staging/r8188eu/hal/rtl8188e_hal_init.c | 4 +-
.../intel/int340x_thermal/int3400_thermal.c | 7 +-
drivers/tty/hvc/hvc_iucv.c | 4 +-
drivers/tty/mxser.c | 15 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 2 +-
drivers/tty/serial/8250/8250_dma.c | 11 +-
drivers/tty/serial/8250/8250_lpss.c | 28 +-
drivers/tty/serial/8250/8250_mid.c | 19 +-
drivers/tty/serial/8250/8250_port.c | 24 +-
drivers/tty/serial/kgdboc.c | 6 +-
drivers/tty/serial/serial_core.c | 14 +
drivers/usb/host/xhci-hub.c | 5 +-
drivers/usb/host/xhci-mem.c | 2 +-
drivers/usb/host/xhci.c | 20 +-
drivers/usb/host/xhci.h | 14 +-
drivers/usb/serial/Kconfig | 1 +
drivers/usb/serial/pl2303.c | 2 +
drivers/usb/serial/pl2303.h | 3 +
drivers/usb/serial/usb-serial-simple.c | 7 +
drivers/usb/storage/ene_ub6250.c | 155 ++++---
drivers/usb/storage/realtek_cr.c | 2 +-
drivers/usb/typec/tipd/core.c | 5 +
drivers/usb/typec/tipd/tps6598x.h | 1 +
drivers/vdpa/mlx5/net/mlx5_vnet.c | 18 +-
drivers/vfio/pci/vfio_pci_core.c | 61 +++
drivers/vhost/iotlb.c | 6 +-
drivers/video/fbdev/atafb.c | 12 +-
drivers/video/fbdev/atmel_lcdfb.c | 11 +-
drivers/video/fbdev/cirrusfb.c | 16 +-
drivers/video/fbdev/controlfb.c | 2 +
drivers/video/fbdev/core/fbcvt.c | 53 +--
drivers/video/fbdev/core/fbmem.c | 29 +-
drivers/video/fbdev/matrox/matroxfb_base.c | 2 +-
drivers/video/fbdev/nvidia/nv_i2c.c | 2 +-
.../fbdev/omap2/omapfb/displays/connector-dvi.c | 1 +
.../fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 8 +-
.../omap2/omapfb/displays/panel-sony-acx565akm.c | 2 +-
.../omap2/omapfb/displays/panel-tpo-td043mtea1.c | 4 +-
drivers/video/fbdev/sm712fb.c | 46 +-
drivers/video/fbdev/smscufx.c | 3 +-
drivers/video/fbdev/udlfb.c | 8 +-
drivers/video/fbdev/w100fb.c | 15 +-
drivers/virt/acrn/hsm.c | 20 +-
drivers/virt/acrn/mm.c | 24 ++
drivers/watchdog/rti_wdt.c | 1 +
drivers/xen/swiotlb-xen.c | 2 +-
fs/binfmt_elf.c | 90 ++--
fs/binfmt_elf_fdpic.c | 18 +-
fs/btrfs/block-group.c | 8 +-
fs/btrfs/disk-io.c | 26 +-
fs/btrfs/file-item.c | 2 +-
fs/btrfs/reflink.c | 7 +-
fs/btrfs/space-info.c | 3 +-
fs/btrfs/volumes.c | 48 ++-
fs/buffer.c | 8 +-
fs/cifs/cifsfs.c | 14 +-
fs/cifs/file.c | 10 +
fs/cifs/smb2ops.c | 130 +++---
fs/coredump.c | 86 +++-
fs/exec.c | 26 +-
fs/ext2/super.c | 6 +-
fs/ext4/inline.c | 9 +-
fs/ext4/inode.c | 25 ++
fs/ext4/mballoc.c | 128 +++---
fs/ext4/namei.c | 10 +-
fs/f2fs/checkpoint.c | 8 +-
fs/f2fs/compress.c | 5 +-
fs/f2fs/data.c | 8 +-
fs/f2fs/debug.c | 18 +-
fs/f2fs/f2fs.h | 1 +
fs/f2fs/file.c | 5 +-
fs/f2fs/gc.c | 4 +-
fs/f2fs/inode.c | 7 +-
fs/f2fs/node.c | 6 +-
fs/f2fs/segment.c | 7 +
fs/f2fs/super.c | 10 +-
fs/f2fs/sysfs.c | 2 +-
fs/file.c | 31 +-
fs/gfs2/bmap.c | 2 +-
fs/gfs2/file.c | 2 +-
fs/gfs2/inode.c | 2 +-
fs/gfs2/rgrp.c | 10 +-
fs/gfs2/rgrp.h | 2 +-
fs/gfs2/super.c | 2 +-
fs/io_uring.c | 10 +-
fs/jffs2/build.c | 4 +-
fs/jffs2/fs.c | 2 +-
fs/jffs2/scan.c | 6 +-
fs/jfs/jfs_dmap.c | 7 +
fs/nfs/callback_proc.c | 27 +-
fs/nfs/callback_xdr.c | 4 -
fs/nfs/nfs2xdr.c | 2 +-
fs/nfs/nfs3xdr.c | 22 +-
fs/nfs/nfs4proc.c | 1 +
fs/nfs/pagelist.c | 1 +
fs/nfs/pnfs.c | 11 +
fs/nfs/pnfs.h | 2 +
fs/nfs/proc.c | 1 +
fs/nfs/write.c | 5 +-
fs/nfsd/filecache.c | 6 +-
fs/nfsd/nfs4state.c | 12 +-
fs/nfsd/nfsproc.c | 2 +-
fs/nfsd/xdr.h | 2 +-
fs/ntfs/inode.c | 4 +
fs/ocfs2/quota_global.c | 23 +-
fs/ocfs2/quota_local.c | 2 -
fs/proc/bootconfig.c | 2 +
fs/pstore/platform.c | 38 +-
fs/ubifs/dir.c | 238 ++++++-----
fs/ubifs/file.c | 14 +-
fs/ubifs/io.c | 34 +-
fs/ubifs/ioctl.c | 2 +-
fs/ubifs/journal.c | 52 ++-
include/drm/drm_connector.h | 12 +-
include/drm/drm_dp_helper.h | 2 +-
include/linux/atomic/atomic-arch-fallback.h | 38 +-
include/linux/binfmts.h | 3 +
include/linux/blk-cgroup.h | 17 +
include/linux/coredump.h | 5 +-
include/linux/fb.h | 1 +
include/linux/mtd/rawnand.h | 2 +
include/linux/nvme.h | 1 +
include/linux/pci.h | 1 +
include/linux/pstore.h | 6 +-
include/linux/randomize_kstack.h | 16 +-
include/linux/sched.h | 19 +-
include/linux/serial_core.h | 2 +
include/linux/skbuff.h | 28 +-
include/linux/skmsg.h | 13 +-
include/linux/soc/ti/ti_sci_protocol.h | 2 +-
include/linux/sunrpc/xdr.h | 2 +
include/linux/swiotlb.h | 3 +-
include/net/netfilter/nf_conntrack_helper.h | 1 +
include/net/netfilter/nf_flow_table.h | 18 +
include/scsi/scsi_device.h | 1 +
include/sound/pcm.h | 1 +
include/trace/events/ext4.h | 78 ++--
include/trace/events/rxrpc.h | 8 +-
include/trace/events/sched.h | 11 +-
include/uapi/linux/bpf.h | 12 +-
include/uapi/linux/rfkill.h | 14 +-
include/uapi/linux/rseq.h | 20 +-
include/uapi/linux/serial_core.h | 3 +
kernel/audit.h | 4 +
kernel/auditsc.c | 87 +++-
kernel/bpf/btf.c | 26 +-
kernel/bpf/stackmap.c | 56 ++-
kernel/debug/kdb/kdb_support.c | 2 +-
kernel/dma/debug.c | 4 +-
kernel/dma/swiotlb.c | 24 +-
kernel/events/core.c | 3 +
kernel/livepatch/core.c | 4 +-
kernel/locking/lockdep.c | 38 +-
kernel/locking/lockdep_internals.h | 6 +-
kernel/locking/lockdep_proc.c | 51 ++-
kernel/power/hibernate.c | 2 +-
kernel/power/suspend_test.c | 8 +-
kernel/printk/printk.c | 6 +-
kernel/ptrace.c | 47 ++-
kernel/rcu/rcu_segcblist.h | 4 +-
kernel/resource.c | 41 +-
kernel/rseq.c | 8 +-
kernel/sched/core.c | 5 +-
kernel/sched/cpuacct.c | 3 +-
kernel/sched/cpufreq_schedutil.c | 1 +
kernel/sched/deadline.c | 12 +-
kernel/sched/debug.c | 10 -
kernel/sched/fair.c | 18 +-
kernel/sched/rt.c | 32 +-
kernel/trace/fgraph.c | 4 +-
kernel/trace/ftrace.c | 4 +-
kernel/trace/trace.c | 9 +-
kernel/trace/trace_events.c | 96 ++++-
kernel/trace/trace_osnoise.c | 4 +-
kernel/trace/trace_sched_switch.c | 1 +
kernel/trace/trace_sched_wakeup.c | 1 +
kernel/watch_queue.c | 4 +-
lib/kunit/try-catch.c | 2 +-
lib/raid6/test/Makefile | 4 +-
lib/raid6/test/test.c | 1 -
lib/test_kmod.c | 1 +
lib/test_lockup.c | 11 +-
lib/test_xarray.c | 22 +
lib/vsprintf.c | 51 ++-
lib/xarray.c | 4 +
mm/kmemleak.c | 9 +-
mm/madvise.c | 3 +-
mm/memcontrol.c | 2 +-
mm/memory.c | 17 +-
mm/mempolicy.c | 8 +-
mm/mlock.c | 7 +-
mm/mmap.c | 2 +-
mm/page_alloc.c | 9 +-
mm/slab.c | 1 +
mm/usercopy.c | 5 +-
net/bluetooth/hci_conn.c | 2 +
net/can/isotp.c | 69 +--
net/core/skbuff.c | 51 ++-
net/core/skmsg.c | 17 +-
net/dsa/dsa2.c | 5 +
net/ipv4/route.c | 18 +-
net/ipv4/tcp_bpf.c | 14 +-
net/ipv4/tcp_output.c | 5 +-
net/ipv6/xfrm6_output.c | 16 +
net/key/af_key.c | 2 +-
net/mac80211/ieee80211_i.h | 2 +-
net/mac80211/main.c | 13 +-
net/mac80211/mesh.c | 2 +-
net/mac80211/mlme.c | 15 +-
net/mac80211/util.c | 27 +-
net/netfilter/nf_conntrack_core.c | 4 +-
net/netfilter/nf_conntrack_helper.c | 6 +
net/netfilter/nf_conntrack_proto_tcp.c | 17 +-
net/netfilter/nf_flow_table_inet.c | 17 +
net/netfilter/nf_flow_table_ip.c | 18 -
net/netfilter/nft_ct.c | 3 +
net/netlink/af_netlink.c | 2 +
net/openvswitch/conntrack.c | 132 +++---
net/openvswitch/flow_netlink.c | 4 +-
net/rfkill/core.c | 48 ++-
net/rxrpc/ar-internal.h | 15 +-
net/rxrpc/call_event.c | 2 +-
net/rxrpc/call_object.c | 40 +-
net/rxrpc/server_key.c | 7 +-
net/sched/act_ct.c | 19 +-
net/sunrpc/clnt.c | 4 +-
net/sunrpc/xprt.c | 7 +
net/tipc/socket.c | 3 +-
net/unix/af_unix.c | 16 +-
net/vmw_vsock/virtio_transport.c | 11 +-
net/x25/af_x25.c | 11 +-
net/xdp/xsk.c | 69 ++-
net/xfrm/xfrm_interface.c | 5 +-
samples/bpf/xdpsock_user.c | 5 +-
samples/landlock/sandboxer.c | 1 +
scripts/atomic/fallbacks/read_acquire | 11 +-
scripts/atomic/fallbacks/set_release | 7 +-
scripts/dtc/Makefile | 2 +-
scripts/gcc-plugins/stackleak_plugin.c | 25 +-
scripts/mod/modpost.c | 2 +-
security/integrity/evm/evm_main.c | 2 +-
security/keys/keyctl_pkey.c | 14 +-
security/keys/trusted-keys/trusted_core.c | 6 +-
security/landlock/syscalls.c | 2 +-
security/security.c | 17 +-
security/selinux/hooks.c | 90 ++--
security/selinux/include/policycap.h | 1 +
security/selinux/include/policycap_names.h | 3 +-
security/selinux/include/security.h | 7 +
security/selinux/selinuxfs.c | 2 +
security/selinux/xfrm.c | 2 +-
security/smack/smack_lsm.c | 2 +-
security/tomoyo/load_policy.c | 4 +-
sound/core/pcm.c | 1 +
sound/core/pcm_lib.c | 9 +-
sound/core/pcm_native.c | 39 +-
sound/firewire/fcp.c | 4 +-
sound/isa/cs423x/cs4236.c | 8 +-
sound/pci/hda/patch_hdmi.c | 8 +-
sound/pci/hda/patch_realtek.c | 15 +-
sound/soc/amd/vangogh/acp5x-pcm-dma.c | 68 +--
sound/soc/atmel/atmel_ssc_dai.c | 5 +-
sound/soc/atmel/mikroe-proto.c | 20 +-
sound/soc/atmel/sam9g20_wm8731.c | 1 +
sound/soc/atmel/sam9x5_wm8731.c | 13 +-
sound/soc/codecs/Kconfig | 5 +
sound/soc/codecs/lpass-rx-macro.c | 14 +-
sound/soc/codecs/lpass-tx-macro.c | 2 +
sound/soc/codecs/lpass-va-macro.c | 4 +-
sound/soc/codecs/lpass-wsa-macro.c | 2 +
sound/soc/codecs/msm8916-wcd-analog.c | 22 +-
sound/soc/codecs/msm8916-wcd-digital.c | 5 +-
sound/soc/codecs/mt6358.c | 4 +
sound/soc/codecs/rk817_codec.c | 6 +-
sound/soc/codecs/rt5663.c | 2 +
sound/soc/codecs/wcd934x.c | 12 +-
sound/soc/codecs/wcd938x.c | 10 +-
sound/soc/codecs/wm8350.c | 28 +-
sound/soc/dwc/dwc-i2s.c | 17 +-
sound/soc/fsl/fsl_spdif.c | 2 +
sound/soc/fsl/imx-es8328.c | 1 +
sound/soc/generic/simple-card-utils.c | 15 +
sound/soc/intel/boards/sof_sdw.c | 2 +-
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 7 +-
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 7 +-
.../mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c | 23 +-
sound/soc/mxs/mxs-saif.c | 5 +-
sound/soc/mxs/mxs-sgtl5000.c | 3 +
sound/soc/rockchip/rockchip_i2s.c | 15 +-
sound/soc/sh/fsi.c | 19 +-
sound/soc/sh/rz-ssi.c | 73 ++--
sound/soc/soc-compress.c | 5 +
sound/soc/soc-core.c | 2 +-
sound/soc/soc-generic-dmaengine-pcm.c | 6 +-
sound/soc/soc-topology.c | 3 +-
sound/soc/sof/imx/imx8m.c | 1 +
sound/soc/sof/intel/Kconfig | 1 +
sound/soc/sof/intel/hda-dai.c | 13 +
sound/soc/sof/intel/hda-loader.c | 11 +-
sound/soc/sof/intel/hda-pcm.c | 1 +
sound/soc/sof/intel/hda.c | 15 +-
sound/soc/ti/davinci-i2s.c | 5 +-
sound/soc/xilinx/xlnx_formatter_pcm.c | 25 ++
sound/spi/at73c213.c | 27 +-
tools/bpf/bpftool/gen.c | 2 +-
tools/bpf/bpftool/map.c | 6 +-
tools/include/uapi/linux/bpf.h | 4 +-
tools/lib/bpf/btf_dump.c | 11 +-
tools/lib/bpf/libbpf.c | 3 +
tools/lib/bpf/netlink.c | 63 ++-
tools/lib/bpf/xsk.c | 11 +
tools/perf/builtin-stat.c | 2 +-
tools/perf/pmu-events/arch/x86/skylakex/cache.json | 111 ++---
.../arch/x86/skylakex/floating-point.json | 24 +-
.../pmu-events/arch/x86/skylakex/frontend.json | 18 +-
.../perf/pmu-events/arch/x86/skylakex/memory.json | 96 ++---
.../pmu-events/arch/x86/skylakex/pipeline.json | 11 +
.../pmu-events/arch/x86/skylakex/skx-metrics.json | 461 ++++++++++++++++++---
.../pmu-events/arch/x86/skylakex/uncore-other.json | 23 +
tools/testing/selftests/bpf/prog_tests/bind_perm.c | 20 +-
.../testing/selftests/bpf/progs/test_map_in_map.c | 2 +-
.../testing/selftests/bpf/progs/test_sock_fields.c | 2 +-
.../bpf/progs/test_tcp_check_syncookie_kern.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp.c | 2 +-
.../bpf/progs/test_xdp_adjust_tail_grow.c | 2 +-
.../bpf/progs/test_xdp_adjust_tail_shrink.c | 4 +-
.../selftests/bpf/progs/test_xdp_devmap_helpers.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp_link.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp_loop.c | 2 +-
.../selftests/bpf/progs/test_xdp_noinline.c | 4 +-
.../bpf/progs/test_xdp_with_cpumap_helpers.c | 4 +-
.../bpf/progs/test_xdp_with_devmap_helpers.c | 4 +-
tools/testing/selftests/bpf/progs/xdp_dummy.c | 2 +-
.../selftests/bpf/progs/xdp_redirect_multi_kern.c | 4 +-
tools/testing/selftests/bpf/progs/xdping_kern.c | 4 +-
tools/testing/selftests/bpf/test_lirc_mode2.sh | 5 +-
tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 10 +-
.../selftests/bpf/test_tcp_check_syncookie.sh | 2 +-
tools/testing/selftests/bpf/test_xdp_redirect.sh | 4 +-
.../selftests/bpf/test_xdp_redirect_multi.sh | 62 +--
tools/testing/selftests/bpf/test_xdp_veth.sh | 4 +-
tools/testing/selftests/bpf/xdping.c | 5 +-
tools/testing/selftests/lkdtm/config | 1 +
.../testing/selftests/net/af_unix/test_unix_oob.c | 6 +-
tools/testing/selftests/net/mptcp/mptcp_connect.sh | 19 +
.../testing/selftests/net/test_vxlan_under_vrf.sh | 8 +-
tools/testing/selftests/net/timestamping.c | 4 +-
tools/testing/selftests/rcutorture/bin/torture.sh | 4 +-
tools/testing/selftests/sgx/Makefile | 2 +-
tools/testing/selftests/vm/Makefile | 12 +-
tools/testing/selftests/x86/Makefile | 6 +-
tools/testing/selftests/x86/check_cc.sh | 2 +-
tools/virtio/virtio_test.c | 1 +
virt/kvm/kvm_main.c | 13 +
963 files changed, 10109 insertions(+), 5145 deletions(-)
From: Paul Kocialkowski <[email protected]>
[ Upstream commit c4af51698c4fb4fc683f2ac67f482cdf9ba2cd13 ]
The csi1 block node was mistakenly added before the gic node, although
its address comes after the gic's. Move the node to its correct
position.
Fixes: 90e048101fa1 ("ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node")
Signed-off-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/sun8i-v3s.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index b30bc1a25ebb..084323d5c61c 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -593,6 +593,17 @@
#size-cells = <0>;
};
+ gic: interrupt-controller@1c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x2000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
csi1: camera@1cb4000 {
compatible = "allwinner,sun8i-v3s-csi";
reg = <0x01cb4000 0x3000>;
@@ -604,16 +615,5 @@
resets = <&ccu RST_BUS_CSI>;
status = "disabled";
};
-
- gic: interrupt-controller@1c81000 {
- compatible = "arm,gic-400";
- reg = <0x01c81000 0x1000>,
- <0x01c82000 0x2000>,
- <0x01c84000 0x2000>,
- <0x01c86000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
};
};
--
2.34.1
From: Naohiro Aota <[email protected]>
commit ca5e4ea0beaec8bc674121838bf8614c089effb9 upstream.
There is a hung_task issue with running generic/068 on an SMR
device. The hang occurs while a process is trying to thaw the
filesystem. The process is trying to take sb->s_umount to thaw the
FS. The lock is held by fsstress, which calls btrfs_sync_fs() and is
waiting for an ordered extent to finish. However, as the FS is frozen,
the ordered extents never finish.
Having an ordered extent while the FS is frozen is the root cause of
the hang. The ordered extent is initiated from btrfs_relocate_chunk()
which is called from btrfs_reclaim_bgs_work().
This commit adds sb_*_write() around btrfs_relocate_chunk() call
site. For the usual "btrfs balance" command, we already call it with
mnt_want_file() in btrfs_ioctl_balance().
Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")
CC: [email protected] # 5.13+
Link: https://github.com/naota/linux/issues/56
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Naohiro Aota <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/block-group.c | 8 +++++++-
fs/btrfs/volumes.c | 3 +++
2 files changed, 10 insertions(+), 1 deletion(-)
--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -1504,8 +1504,12 @@ void btrfs_reclaim_bgs_work(struct work_
if (!test_bit(BTRFS_FS_OPEN, &fs_info->flags))
return;
- if (!btrfs_exclop_start(fs_info, BTRFS_EXCLOP_BALANCE))
+ sb_start_write(fs_info->sb);
+
+ if (!btrfs_exclop_start(fs_info, BTRFS_EXCLOP_BALANCE)) {
+ sb_end_write(fs_info->sb);
return;
+ }
/*
* Long running balances can keep us blocked here for eternity, so
@@ -1513,6 +1517,7 @@ void btrfs_reclaim_bgs_work(struct work_
*/
if (!mutex_trylock(&fs_info->reclaim_bgs_lock)) {
btrfs_exclop_finish(fs_info);
+ sb_end_write(fs_info->sb);
return;
}
@@ -1581,6 +1586,7 @@ next:
spin_unlock(&fs_info->unused_bgs_lock);
mutex_unlock(&fs_info->reclaim_bgs_lock);
btrfs_exclop_finish(fs_info);
+ sb_end_write(fs_info->sb);
}
void btrfs_reclaim_bgs(struct btrfs_fs_info *fs_info)
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -8185,10 +8185,12 @@ static int relocating_repair_kthread(voi
target = cache->start;
btrfs_put_block_group(cache);
+ sb_start_write(fs_info->sb);
if (!btrfs_exclop_start(fs_info, BTRFS_EXCLOP_BALANCE)) {
btrfs_info(fs_info,
"zoned: skip relocating block group %llu to repair: EBUSY",
target);
+ sb_end_write(fs_info->sb);
return -EBUSY;
}
@@ -8216,6 +8218,7 @@ out:
btrfs_put_block_group(cache);
mutex_unlock(&fs_info->reclaim_bgs_lock);
btrfs_exclop_finish(fs_info);
+ sb_end_write(fs_info->sb);
return ret;
}
From: Charan Teja Kalla <[email protected]>
commit 5bd009c7c9a9e888077c07535dc0c70aeab242c3 upstream.
Patch series "mm: madvise: return correct bytes processed with
process_madvise", v2. With the process_madvise(), always choose to return
non zero processed bytes over an error. This can help the user to know on
which VMA, passed in the 'struct iovec' vector list, is failed to advise
thus can take the decission of retrying/skipping on that VMA.
This patch (of 2):
The process_madvise() system call returns error even after processing some
VMA's passed in the 'struct iovec' vector list which leaves the user
confused to know where to restart the advise next. It is also against
this syscall man page[1] documentation where it mentions that "return
value may be less than the total number of requested bytes, if an error
occurred after some iovec elements were already processed.".
Consider a user passed 10 VMA's in the 'struct iovec' vector list of which
9 are processed but one. Then it just returns the error caused on that
failed VMA despite the first 9 VMA's processed, leaving the user confused
about on which VMA it is failed. Returning the number of bytes processed
here can help the user to know which VMA it is failed on and thus can
retry/skip the advise on that VMA.
[1]https://man7.org/linux/man-pages/man2/process_madvise.2.html.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/125b61a0edcee5c2db8658aed9d06a43a19ccafc.1647008754.git.quic_charante@quicinc.com
Fixes: ecb8ac8b1f14("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
Signed-off-by: Charan Teja Kalla <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/madvise.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -1301,8 +1301,7 @@ SYSCALL_DEFINE5(process_madvise, int, pi
iov_iter_advance(&iter, iovec.iov_len);
}
- if (ret == 0)
- ret = total_len - iov_iter_count(&iter);
+ ret = (total_len - iov_iter_count(&iter)) ? : ret;
release_mm:
mmput(mm);
From: Mike Snitzer <[email protected]>
commit 9f6dc633761006f974701d4c88da71ab68670749 upstream.
Commit d208b89401e0 ("dm: fix mempool NULL pointer race when
completing IO") didn't go far enough.
When bio_end_io_acct ends the count of in-flight I/Os may reach zero
and the DM device may be suspended. There is a possibility that the
suspend races with dm_stats_account_io.
Fix this by adding percpu "pending_io" counters to track outstanding
dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also,
rename md_in_flight_bios() to dm_in_flight_bios() and update it to
iterate all pending_io counters.
Fixes: d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO")
Cc: [email protected]
Co-developed-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-core.h | 2 ++
drivers/md/dm.c | 35 +++++++++++++++++++++++------------
2 files changed, 25 insertions(+), 12 deletions(-)
--- a/drivers/md/dm-core.h
+++ b/drivers/md/dm-core.h
@@ -65,6 +65,8 @@ struct mapped_device {
struct gendisk *disk;
struct dax_device *dax_dev;
+ unsigned long __percpu *pending_io;
+
/*
* A list of ios that arrived while we were suspended.
*/
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -507,10 +507,6 @@ static void end_io_acct(struct mapped_de
dm_stats_account_io(&md->stats, bio_data_dir(bio),
bio->bi_iter.bi_sector, bio_sectors(bio),
true, duration, stats_aux);
-
- /* nudge anyone waiting on suspend queue */
- if (unlikely(wq_has_sleeper(&md->wait)))
- wake_up(&md->wait);
}
static struct dm_io *alloc_io(struct mapped_device *md, struct bio *bio)
@@ -531,6 +527,7 @@ static struct dm_io *alloc_io(struct map
io->magic = DM_IO_MAGIC;
io->status = 0;
atomic_set(&io->io_count, 1);
+ this_cpu_inc(*md->pending_io);
io->orig_bio = bio;
io->md = md;
spin_lock_init(&io->endio_lock);
@@ -828,6 +825,12 @@ void dm_io_dec_pending(struct dm_io *io,
stats_aux = io->stats_aux;
free_io(md, io);
end_io_acct(md, bio, start_time, &stats_aux);
+ smp_wmb();
+ this_cpu_dec(*md->pending_io);
+
+ /* nudge anyone waiting on suspend queue */
+ if (unlikely(wq_has_sleeper(&md->wait)))
+ wake_up(&md->wait);
if (io_error == BLK_STS_DM_REQUEUE)
return;
@@ -1697,6 +1700,11 @@ static void cleanup_mapped_device(struct
blk_cleanup_disk(md->disk);
}
+ if (md->pending_io) {
+ free_percpu(md->pending_io);
+ md->pending_io = NULL;
+ }
+
cleanup_srcu_struct(&md->io_barrier);
mutex_destroy(&md->suspend_lock);
@@ -1794,6 +1802,10 @@ static struct mapped_device *alloc_dev(i
if (!md->wq)
goto bad;
+ md->pending_io = alloc_percpu(unsigned long);
+ if (!md->pending_io)
+ goto bad;
+
dm_stats_init(&md->stats);
/* Populate the mapping, nobody knows we exist yet */
@@ -2209,16 +2221,13 @@ void dm_put(struct mapped_device *md)
}
EXPORT_SYMBOL_GPL(dm_put);
-static bool md_in_flight_bios(struct mapped_device *md)
+static bool dm_in_flight_bios(struct mapped_device *md)
{
int cpu;
- struct block_device *part = dm_disk(md)->part0;
- long sum = 0;
+ unsigned long sum = 0;
- for_each_possible_cpu(cpu) {
- sum += part_stat_local_read_cpu(part, in_flight[0], cpu);
- sum += part_stat_local_read_cpu(part, in_flight[1], cpu);
- }
+ for_each_possible_cpu(cpu)
+ sum += *per_cpu_ptr(md->pending_io, cpu);
return sum != 0;
}
@@ -2231,7 +2240,7 @@ static int dm_wait_for_bios_completion(s
while (true) {
prepare_to_wait(&md->wait, &wait, task_state);
- if (!md_in_flight_bios(md))
+ if (!dm_in_flight_bios(md))
break;
if (signal_pending_state(task_state, current)) {
@@ -2243,6 +2252,8 @@ static int dm_wait_for_bios_completion(s
}
finish_wait(&md->wait, &wait);
+ smp_rmb();
+
return r;
}
From: Randy Dunlap <[email protected]>
[ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.
Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/acpi_pm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index eb596ff9e7bb..279ddff81ab4 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -229,8 +229,10 @@ static int __init parse_pmtmr(char *arg)
int ret;
ret = kstrtouint(arg, 16, &base);
- if (ret)
- return ret;
+ if (ret) {
+ pr_warn("PMTMR: invalid 'pmtmr=' value: '%s'\n", arg);
+ return 1;
+ }
pr_info("PMTMR IOPort override: 0x%04x -> 0x%04x\n", pmtmr_ioport,
base);
--
2.34.1
From: Hangyu Hua <[email protected]>
commit 3d3925ff6433f98992685a9679613a2cc97f3ce2 upstream.
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Hangyu Hua <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/usb_8dev.c | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -670,9 +670,20 @@ static netdev_tx_t usb_8dev_start_xmit(s
atomic_inc(&priv->active_tx_urbs);
err = usb_submit_urb(urb, GFP_ATOMIC);
- if (unlikely(err))
- goto failed;
- else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
+ if (unlikely(err)) {
+ can_free_echo_skb(netdev, context->echo_index, NULL);
+
+ usb_unanchor_urb(urb);
+ usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
+
+ atomic_dec(&priv->active_tx_urbs);
+
+ if (err == -ENODEV)
+ netif_device_detach(netdev);
+ else
+ netdev_warn(netdev, "failed tx_urb %d\n", err);
+ stats->tx_dropped++;
+ } else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
/* Slow down tx path */
netif_stop_queue(netdev);
@@ -691,19 +702,6 @@ nofreecontext:
return NETDEV_TX_BUSY;
-failed:
- can_free_echo_skb(netdev, context->echo_index, NULL);
-
- usb_unanchor_urb(urb);
- usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
-
- atomic_dec(&priv->active_tx_urbs);
-
- if (err == -ENODEV)
- netif_device_detach(netdev);
- else
- netdev_warn(netdev, "failed tx_urb %d\n", err);
-
nomembuf:
usb_free_urb(urb);
From: Michael Hübner <[email protected]>
[ Upstream commit 0a5a587501b54e8c6d86960b047d4491fd40dcf2 ]
Different add ons to the wheel base report different models. Having
no wheel mounted to the base and using the open wheel attachment is
added here.
Signed-off-by: Michael Hübner <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-thrustmaster.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/hid/hid-thrustmaster.c b/drivers/hid/hid-thrustmaster.c
index afdd778a10f0..a28c3e575650 100644
--- a/drivers/hid/hid-thrustmaster.c
+++ b/drivers/hid/hid-thrustmaster.c
@@ -64,7 +64,9 @@ struct tm_wheel_info {
*/
static const struct tm_wheel_info tm_wheels_infos[] = {
{0x0306, 0x0006, "Thrustmaster T150RS"},
+ {0x0200, 0x0005, "Thrustmaster T300RS (Missing Attachment)"},
{0x0206, 0x0005, "Thrustmaster T300RS"},
+ {0x0209, 0x0005, "Thrustmaster T300RS (Open Wheel Attachment)"},
{0x0204, 0x0005, "Thrustmaster T300 Ferrari Alcantara Edition"},
{0x0002, 0x0002, "Thrustmaster T500RS"}
//{0x0407, 0x0001, "Thrustmaster TMX"}
--
2.34.1
From: Kunihiko Hayashi <[email protected]>
commit ca85a66710a8a1f6b0719397225c3e9ee0abb692 upstream.
Fixed-rate clocks in UniPhier don't have any parent clocks, however,
initial data "init.flags" isn't initialized, so it might be determined
that there is a parent clock for fixed-rate clock.
This sets init.flags to zero as initialization.
Cc: <[email protected]>
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Kunihiko Hayashi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/uniphier/clk-uniphier-fixed-rate.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/clk/uniphier/clk-uniphier-fixed-rate.c
+++ b/drivers/clk/uniphier/clk-uniphier-fixed-rate.c
@@ -24,6 +24,7 @@ struct clk_hw *uniphier_clk_register_fix
init.name = name;
init.ops = &clk_fixed_rate_ops;
+ init.flags = 0;
init.parent_names = NULL;
init.num_parents = 0;
From: Bagas Sanjaya <[email protected]>
commit 587d39b260c4d090166314d64be70b1f6a26b0b5 upstream.
There is also stable release candidate tree. Mention it, however with a
warning that the tree is for testing purposes.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Bagas Sanjaya <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/process/stable-kernel-rules.rst | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/Documentation/process/stable-kernel-rules.rst
+++ b/Documentation/process/stable-kernel-rules.rst
@@ -170,6 +170,15 @@ Trees
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+ - The release candidate of all stable kernel versions can be found at:
+
+ https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+ .. warning::
+ The -stable-rc tree is a snapshot in time of the stable-queue tree and
+ will change frequently, hence will be rebased often. It should only be
+ used for testing purposes (e.g. to be consumed by CI systems).
+
Review committee
----------------
From: Eric Biggers <[email protected]>
commit 9b30430ea356f237945e52f8a3a42158877bd5a9 upstream.
The pkcs1pad template can be instantiated with an arbitrary akcipher
algorithm, which doesn't make sense; it is specifically an RSA padding
scheme. Make it check that the underlying algorithm really is RSA.
Fixes: 3d5b1ecdea6f ("crypto: rsa - RSA padding algorithm")
Cc: <[email protected]> # v4.5+
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa-pkcs1pad.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -621,6 +621,11 @@ static int pkcs1pad_create(struct crypto
rsa_alg = crypto_spawn_akcipher_alg(&ctx->spawn);
+ if (strcmp(rsa_alg->base.cra_name, "rsa") != 0) {
+ err = -EINVAL;
+ goto err_free_inst;
+ }
+
err = -ENAMETOOLONG;
hash_name = crypto_attr_alg_name(tb[2]);
if (IS_ERR(hash_name)) {
From: Randy Dunlap <[email protected]>
[ Upstream commit f3303ff649dbf7dcdc6a6e1a922235b12b3028f4 ]
__setup() handlers should return 1 to indicate that the boot option
has been handled. Returning 0 causes a boot option to be listed in
the Unknown kernel command line parameters and also added to init's
arg list (if no '=' sign) or environment list (if of the form 'a=b').
Unknown kernel command line parameters "erst_disable
bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
erst_disable
bert_disable
hest_disable
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support")
Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support")
Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Reviewed-by: "Huang, Ying" <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/apei/bert.c | 2 +-
drivers/acpi/apei/erst.c | 2 +-
drivers/acpi/apei/hest.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c
index 19e50fcbf4d6..86211422f4ee 100644
--- a/drivers/acpi/apei/bert.c
+++ b/drivers/acpi/apei/bert.c
@@ -77,7 +77,7 @@ static int __init setup_bert_disable(char *str)
{
bert_disable = 1;
- return 0;
+ return 1;
}
__setup("bert_disable", setup_bert_disable);
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 242f3c2d5533..698d67cee052 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -891,7 +891,7 @@ EXPORT_SYMBOL_GPL(erst_clear);
static int __init setup_erst_disable(char *str)
{
erst_disable = 1;
- return 0;
+ return 1;
}
__setup("erst_disable", setup_erst_disable);
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 277f00b288d1..317bba602ad5 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -223,7 +223,7 @@ static int __init hest_ghes_dev_register(unsigned int ghes_count)
static int __init setup_hest_disable(char *str)
{
hest_disable = HEST_DISABLED;
- return 0;
+ return 1;
}
__setup("hest_disable", setup_hest_disable);
--
2.34.1
From: Gwendal Grignou <[email protected]>
commit f97ec5d75e9261a5da78dc28a8955b7cc0c4468b upstream.
Allocating memory with kmalloc and GPF_DMA32 is not allowed, the
allocator will ignore the attribute.
Instead, use dma_alloc_coherent() API as we allocate a small amount of
memory to transfer firmware fragment to the ISH.
On Arcada chromebook, after the patch the warning:
"Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xcc0 (GFP_KERNEL). Fix your code!"
is gone. The ISH firmware is loaded properly and we can interact with
the ISH:
> ectool --name cros_ish version
...
Build info: arcada_ish_v2.0.3661+3c1a1c1ae0 2022-02-08 05:37:47 @localhost
Tool version: v2.0.12300-900b03ec7f 2022-02-08 10:01:48 @localhost
Fixes: commit 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Gwendal Grignou <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Cc: [email protected]
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 29 ++--------------------------
1 file changed, 3 insertions(+), 26 deletions(-)
--- a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
+++ b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
@@ -657,21 +657,12 @@ static int ish_fw_xfer_direct_dma(struct
*/
payload_max_size &= ~(L1_CACHE_BYTES - 1);
- dma_buf = kmalloc(payload_max_size, GFP_KERNEL | GFP_DMA32);
+ dma_buf = dma_alloc_coherent(devc, payload_max_size, &dma_buf_phy, GFP_KERNEL);
if (!dma_buf) {
client_data->flag_retry = true;
return -ENOMEM;
}
- dma_buf_phy = dma_map_single(devc, dma_buf, payload_max_size,
- DMA_TO_DEVICE);
- if (dma_mapping_error(devc, dma_buf_phy)) {
- dev_err(cl_data_to_dev(client_data), "DMA map failed\n");
- client_data->flag_retry = true;
- rv = -ENOMEM;
- goto end_err_dma_buf_release;
- }
-
ldr_xfer_dma_frag.fragment.hdr.command = LOADER_CMD_XFER_FRAGMENT;
ldr_xfer_dma_frag.fragment.xfer_mode = LOADER_XFER_MODE_DIRECT_DMA;
ldr_xfer_dma_frag.ddr_phys_addr = (u64)dma_buf_phy;
@@ -691,14 +682,7 @@ static int ish_fw_xfer_direct_dma(struct
ldr_xfer_dma_frag.fragment.size = fragment_size;
memcpy(dma_buf, &fw->data[fragment_offset], fragment_size);
- dma_sync_single_for_device(devc, dma_buf_phy,
- payload_max_size,
- DMA_TO_DEVICE);
-
- /*
- * Flush cache here because the dma_sync_single_for_device()
- * does not do for x86.
- */
+ /* Flush cache to be sure the data is in main memory. */
clflush_cache_range(dma_buf, payload_max_size);
dev_dbg(cl_data_to_dev(client_data),
@@ -721,15 +705,8 @@ static int ish_fw_xfer_direct_dma(struct
fragment_offset += fragment_size;
}
- dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
- kfree(dma_buf);
- return 0;
-
end_err_resp_buf_release:
- /* Free ISH buffer if not done already, in error case */
- dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
-end_err_dma_buf_release:
- kfree(dma_buf);
+ dma_free_coherent(devc, payload_max_size, dma_buf, dma_buf_phy);
return rv;
}
From: Jann Horn <[email protected]>
commit 8126b1c73108bc691f5643df19071a59a69d0bc6 upstream.
pstore_dump() is *always* invoked in atomic context (nowadays in an RCU
read-side critical section, before that under a spinlock).
It doesn't make sense to try to use semaphores here.
This is mostly a revert of commit ea84b580b955 ("pstore: Convert buf_lock
to semaphore"), except that two parts aren't restored back exactly as they
were:
- keep the lock initialization in pstore_register
- in efi_pstore_write(), always set the "block" flag to false
- omit "is_locked", that was unnecessary since
commit 959217c84c27 ("pstore: Actually give up during locking failure")
- fix the bailout message
The actual problem that the buggy commit was trying to address may have
been that the use of preemptible() in efi_pstore_write() was wrong - it
only looks at preempt_count() and the state of IRQs, but __rcu_read_lock()
doesn't touch either of those under CONFIG_PREEMPT_RCU.
(Sidenote: CONFIG_PREEMPT_RCU means that the scheduler can preempt tasks in
RCU read-side critical sections, but you're not allowed to actively
block/reschedule.)
Lockdep probably never caught the problem because it's very rare that you
actually hit the contended case, so lockdep always just sees the
down_trylock(), not the down_interruptible(), and so it can't tell that
there's a problem.
Fixes: ea84b580b955 ("pstore: Convert buf_lock to semaphore")
Cc: [email protected]
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/efi-pstore.c | 2 +-
fs/pstore/platform.c | 38 ++++++++++++++++++--------------------
include/linux/pstore.h | 6 +++---
3 files changed, 22 insertions(+), 24 deletions(-)
--- a/drivers/firmware/efi/efi-pstore.c
+++ b/drivers/firmware/efi/efi-pstore.c
@@ -266,7 +266,7 @@ static int efi_pstore_write(struct pstor
efi_name[i] = name[i];
ret = efivar_entry_set_safe(efi_name, vendor, PSTORE_EFI_ATTRIBUTES,
- preemptible(), record->size, record->psi->buf);
+ false, record->size, record->psi->buf);
if (record->reason == KMSG_DUMP_OOPS && try_module_get(THIS_MODULE))
if (!schedule_work(&efivar_work))
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -143,21 +143,22 @@ static void pstore_timer_kick(void)
mod_timer(&pstore_timer, jiffies + msecs_to_jiffies(pstore_update_ms));
}
-/*
- * Should pstore_dump() wait for a concurrent pstore_dump()? If
- * not, the current pstore_dump() will report a failure to dump
- * and return.
- */
-static bool pstore_cannot_wait(enum kmsg_dump_reason reason)
+static bool pstore_cannot_block_path(enum kmsg_dump_reason reason)
{
- /* In NMI path, pstore shouldn't block regardless of reason. */
+ /*
+ * In case of NMI path, pstore shouldn't be blocked
+ * regardless of reason.
+ */
if (in_nmi())
return true;
switch (reason) {
/* In panic case, other cpus are stopped by smp_send_stop(). */
case KMSG_DUMP_PANIC:
- /* Emergency restart shouldn't be blocked. */
+ /*
+ * Emergency restart shouldn't be blocked by spinning on
+ * pstore_info::buf_lock.
+ */
case KMSG_DUMP_EMERG:
return true;
default:
@@ -389,21 +390,19 @@ static void pstore_dump(struct kmsg_dump
unsigned long total = 0;
const char *why;
unsigned int part = 1;
+ unsigned long flags = 0;
int ret;
why = kmsg_dump_reason_str(reason);
- if (down_trylock(&psinfo->buf_lock)) {
- /* Failed to acquire lock: give up if we cannot wait. */
- if (pstore_cannot_wait(reason)) {
- pr_err("dump skipped in %s path: may corrupt error record\n",
- in_nmi() ? "NMI" : why);
- return;
- }
- if (down_interruptible(&psinfo->buf_lock)) {
- pr_err("could not grab semaphore?!\n");
+ if (pstore_cannot_block_path(reason)) {
+ if (!spin_trylock_irqsave(&psinfo->buf_lock, flags)) {
+ pr_err("dump skipped in %s path because of concurrent dump\n",
+ in_nmi() ? "NMI" : why);
return;
}
+ } else {
+ spin_lock_irqsave(&psinfo->buf_lock, flags);
}
kmsg_dump_rewind(&iter);
@@ -467,8 +466,7 @@ static void pstore_dump(struct kmsg_dump
total += record.size;
part++;
}
-
- up(&psinfo->buf_lock);
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
}
static struct kmsg_dumper pstore_dumper = {
@@ -594,7 +592,7 @@ int pstore_register(struct pstore_info *
psi->write_user = pstore_write_user_compat;
psinfo = psi;
mutex_init(&psinfo->read_mutex);
- sema_init(&psinfo->buf_lock, 1);
+ spin_lock_init(&psinfo->buf_lock);
if (psi->flags & PSTORE_FLAGS_DMESG)
allocate_buf_for_compression();
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -14,7 +14,7 @@
#include <linux/errno.h>
#include <linux/kmsg_dump.h>
#include <linux/mutex.h>
-#include <linux/semaphore.h>
+#include <linux/spinlock.h>
#include <linux/time.h>
#include <linux/types.h>
@@ -87,7 +87,7 @@ struct pstore_record {
* @owner: module which is responsible for this backend driver
* @name: name of the backend driver
*
- * @buf_lock: semaphore to serialize access to @buf
+ * @buf_lock: spinlock to serialize access to @buf
* @buf: preallocated crash dump buffer
* @bufsize: size of @buf available for crash dump bytes (must match
* smallest number of bytes available for writing to a
@@ -178,7 +178,7 @@ struct pstore_info {
struct module *owner;
const char *name;
- struct semaphore buf_lock;
+ spinlock_t buf_lock;
char *buf;
size_t bufsize;
From: Chao Yu <[email protected]>
commit 6d18762ed5cd549fde74fd0e05d4d87bac5a3beb upstream.
As Pavel Machek reported in below link [1]:
After commit 77900c45ee5c ("f2fs: fix to do sanity check in is_alive()"),
node page should be unlock via calling f2fs_put_page() in the error path
of is_alive(), otherwise, f2fs may hang when it tries to lock the node
page, fix it.
[1] https://lore.kernel.org/stable/[email protected]/
Fixes: 77900c45ee5c ("f2fs: fix to do sanity check in is_alive()")
Cc: <[email protected]>
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Pavel Machek <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/gc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1023,8 +1023,10 @@ static bool is_alive(struct f2fs_sb_info
set_sbi_flag(sbi, SBI_NEED_FSCK);
}
- if (f2fs_check_nid_range(sbi, dni->ino))
+ if (f2fs_check_nid_range(sbi, dni->ino)) {
+ f2fs_put_page(node_page, 1);
return false;
+ }
*nofs = ofs_of_node(node_page);
source_blkaddr = data_blkaddr(NULL, node_page, ofs_in_node);
From: Pekka Pessi <[email protected]>
commit 60de2d2dc284e0dd1c2c897d08625bde24ef3454 upstream.
The txdone can re-fill the mailbox. Keep polling the mailbox during the
flush until all the messages have been delivered.
This fixes an issue with the Tegra Combined UART (TCU) where output can
get truncated under high traffic load.
Signed-off-by: Pekka Pessi <[email protected]>
Tested-by: Jon Hunter <[email protected]>
Fixes: 91b1b1c3da8a ("mailbox: tegra-hsp: Add support for shared mailboxes")
Cc: [email protected]
Signed-off-by: Thierry Reding <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mailbox/tegra-hsp.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/mailbox/tegra-hsp.c
+++ b/drivers/mailbox/tegra-hsp.c
@@ -412,6 +412,11 @@ static int tegra_hsp_mailbox_flush(struc
value = tegra_hsp_channel_readl(ch, HSP_SM_SHRD_MBOX);
if ((value & HSP_SM_SHRD_MBOX_FULL) == 0) {
mbox_chan_txdone(chan, 0);
+
+ /* Wait until channel is empty */
+ if (chan->active_req != NULL)
+ continue;
+
return 0;
}
From: Ye Bin <[email protected]>
commit 7aab5c84a0f6ec2290e2ba4a6b245178b1bf949a upstream.
We inject IO error when rmdir non empty direcory, then got issue as follows:
step1: mkfs.ext4 -F /dev/sda
step2: mount /dev/sda test
step3: cd test
step4: mkdir -p 1/2
step5: rmdir 1
[ 110.920551] ext4_empty_dir: inject fault
[ 110.921926] EXT4-fs warning (device sda): ext4_rmdir:3113: inode #12:
comm rmdir: empty directory '1' has too many links (3)
step6: cd ..
step7: umount test
step8: fsck.ext4 -f /dev/sda
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Entry '..' in .../??? (13) has deleted/unused inode 12. Clear<y>? yes
Pass 3: Checking directory connectivity
Unconnected directory inode 13 (...)
Connect to /lost+found<y>? yes
Pass 4: Checking reference counts
Inode 13 ref count is 3, should be 2. Fix<y>? yes
Pass 5: Checking group summary information
/dev/sda: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda: 12/131072 files (0.0% non-contiguous), 26157/524288 blocks
ext4_rmdir
if (!ext4_empty_dir(inode))
goto end_rmdir;
ext4_empty_dir
bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE);
if (IS_ERR(bh))
return true;
Now if read directory block failed, 'ext4_empty_dir' will return true, assume
directory is empty. Obviously, it will lead to above issue.
To solve this issue, if read directory block failed 'ext4_empty_dir' just
return false. To avoid making things worse when file system is already
corrupted, 'ext4_empty_dir' also return false.
Signed-off-by: Ye Bin <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inline.c | 9 ++++-----
fs/ext4/namei.c | 10 +++++-----
2 files changed, 9 insertions(+), 10 deletions(-)
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1788,19 +1788,20 @@ bool empty_inline_dir(struct inode *dir,
void *inline_pos;
unsigned int offset;
struct ext4_dir_entry_2 *de;
- bool ret = true;
+ bool ret = false;
err = ext4_get_inode_loc(dir, &iloc);
if (err) {
EXT4_ERROR_INODE_ERR(dir, -err,
"error %d getting inode %lu block",
err, dir->i_ino);
- return true;
+ return false;
}
down_read(&EXT4_I(dir)->xattr_sem);
if (!ext4_has_inline_data(dir)) {
*has_inline_data = 0;
+ ret = true;
goto out;
}
@@ -1809,7 +1810,6 @@ bool empty_inline_dir(struct inode *dir,
ext4_warning(dir->i_sb,
"bad inline directory (dir #%lu) - no `..'",
dir->i_ino);
- ret = true;
goto out;
}
@@ -1828,16 +1828,15 @@ bool empty_inline_dir(struct inode *dir,
dir->i_ino, le32_to_cpu(de->inode),
le16_to_cpu(de->rec_len), de->name_len,
inline_size);
- ret = true;
goto out;
}
if (le32_to_cpu(de->inode)) {
- ret = false;
goto out;
}
offset += ext4_rec_len_from_disk(de->rec_len, inline_size);
}
+ ret = true;
out:
up_read(&EXT4_I(dir)->xattr_sem);
brelse(iloc.bh);
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2997,14 +2997,14 @@ bool ext4_empty_dir(struct inode *inode)
if (inode->i_size < ext4_dir_rec_len(1, NULL) +
ext4_dir_rec_len(2, NULL)) {
EXT4_ERROR_INODE(inode, "invalid size");
- return true;
+ return false;
}
/* The first directory block must not be a hole,
* so treat it as DIRENT_HTREE
*/
bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE);
if (IS_ERR(bh))
- return true;
+ return false;
de = (struct ext4_dir_entry_2 *) bh->b_data;
if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, bh->b_size,
@@ -3012,7 +3012,7 @@ bool ext4_empty_dir(struct inode *inode)
le32_to_cpu(de->inode) != inode->i_ino || strcmp(".", de->name)) {
ext4_warning_inode(inode, "directory missing '.'");
brelse(bh);
- return true;
+ return false;
}
offset = ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize);
de = ext4_next_entry(de, sb->s_blocksize);
@@ -3021,7 +3021,7 @@ bool ext4_empty_dir(struct inode *inode)
le32_to_cpu(de->inode) == 0 || strcmp("..", de->name)) {
ext4_warning_inode(inode, "directory missing '..'");
brelse(bh);
- return true;
+ return false;
}
offset += ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize);
while (offset < inode->i_size) {
@@ -3035,7 +3035,7 @@ bool ext4_empty_dir(struct inode *inode)
continue;
}
if (IS_ERR(bh))
- return true;
+ return false;
}
de = (struct ext4_dir_entry_2 *) (bh->b_data +
(offset & (sb->s_blocksize - 1)));
From: Minchan Kim <[email protected]>
commit c0226eb8bde854e016a594a16f5c0d98aca426fa upstream.
Check lru_cache_disabled under bh_lru_lock. Otherwise, it could introduce
race below and it fails to migrate pages containing buffer_head.
CPU 0 CPU 1
bh_lru_install
lru_cache_disable
lru_cache_disabled = false
atomic_inc(&lru_disable_count);
invalidate_bh_lrus_cpu of CPU 0
bh_lru_lock
__invalidate_bh_lrus
bh_lru_unlock
bh_lru_lock
install the bh
bh_lru_unlock
WHen this race happens a CMA allocation fails, which is critical for
the workload which depends on CMA.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 8cc621d2f45d ("mm: fs: invalidate BH LRU during page migration")
Signed-off-by: Minchan Kim <[email protected]>
Cc: Chris Goldsworthy <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: John Dias <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/buffer.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1235,16 +1235,18 @@ static void bh_lru_install(struct buffer
int i;
check_irqs_on();
+ bh_lru_lock();
+
/*
* the refcount of buffer_head in bh_lru prevents dropping the
* attached page(i.e., try_to_free_buffers) so it could cause
* failing page migration.
* Skip putting upcoming bh into bh_lru until migration is done.
*/
- if (lru_cache_disabled())
+ if (lru_cache_disabled()) {
+ bh_lru_unlock();
return;
-
- bh_lru_lock();
+ }
b = this_cpu_ptr(&bh_lrus);
for (i = 0; i < BH_LRU_SIZE; i++) {
From: Ard Biesheuvel <[email protected]>
[ Upstream commit dd88b03ff0c84f4bcbe1419b93a4bed429fed3be ]
Using ADR to take the address of 'ftrace_stub' via a local label
produces an address that has the Thumb bit cleared, which means the
subsequent comparison is guaranteed to fail. Instead, use the badr
macro, which forces the Thumb bit to be set.
Fixes: a3ba87a61499 ("ARM: 6316/1: ftrace: add Thumb-2 support")
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/entry-ftrace.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index a74289ebc803..f4886fb6e9ba 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -40,7 +40,7 @@
mcount_enter
ldr r0, =ftrace_trace_function
ldr r2, [r0]
- adr r0, .Lftrace_stub
+ badr r0, .Lftrace_stub
cmp r0, r2
bne 1f
--
2.34.1
From: Jaegeuk Kim <[email protected]>
[ Upstream commit 2fef99b8372c1ae3d8445ab570e888b5a358dbe9 ]
This patch fixes xfstests/generic/475 failure.
[ 293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix.
[ 293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[ 293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[ 293.691764] sh (7615): drop_caches: 3
[ 293.691819] sh (7616): drop_caches: 3
[ 293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read
[ 293.695659] sh (7618): drop_caches: 3
[ 293.696979] sh (7617): drop_caches: 3
[ 293.700290] sh (7623): drop_caches: 3
[ 293.708621] sh (7626): drop_caches: 3
[ 293.711386] sh (7628): drop_caches: 3
[ 293.711825] sh (7627): drop_caches: 3
[ 293.716738] sh (7630): drop_caches: 3
[ 293.719613] sh (7632): drop_caches: 3
[ 293.720971] sh (7633): drop_caches: 3
[ 293.727741] sh (7634): drop_caches: 3
[ 293.730783] sh (7636): drop_caches: 3
[ 293.732681] sh (7635): drop_caches: 3
[ 293.732988] sh (7637): drop_caches: 3
[ 293.738836] sh (7639): drop_caches: 3
[ 293.740568] sh (7641): drop_caches: 3
[ 293.743053] sh (7640): drop_caches: 3
[ 293.821889] ------------[ cut here ]------------
[ 293.824654] kernel BUG at fs/f2fs/node.c:3334!
[ 293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G OE 5.17.0-rc1-custom #1
[ 293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs]
[ 293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b
[ 293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202
[ 293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072
[ 293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21
[ 293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072
[ 293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00
[ 293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8
[ 293.847855] FS: 00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000
[ 293.850647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0
[ 293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 293.858380] Call Trace:
[ 293.859302] <TASK>
[ 293.860311] ? ttwu_do_wakeup+0x1c/0x170
[ 293.861800] ? ttwu_do_activate+0x6d/0xb0
[ 293.863057] ? _raw_spin_unlock_irqrestore+0x29/0x40
[ 293.864411] ? try_to_wake_up+0x9d/0x5e0
[ 293.865618] ? debug_smp_processor_id+0x17/0x20
[ 293.866934] ? debug_smp_processor_id+0x17/0x20
[ 293.868223] ? free_unref_page+0xbf/0x120
[ 293.869470] ? __free_slab+0xcb/0x1c0
[ 293.870614] ? preempt_count_add+0x7a/0xc0
[ 293.871811] ? __slab_free+0xa0/0x2d0
[ 293.872918] ? __wake_up_common_lock+0x8a/0xc0
[ 293.874186] ? __slab_free+0xa0/0x2d0
[ 293.875305] ? free_inode_nonrcu+0x20/0x20
[ 293.876466] ? free_inode_nonrcu+0x20/0x20
[ 293.877650] ? debug_smp_processor_id+0x17/0x20
[ 293.878949] ? call_rcu+0x11a/0x240
[ 293.880060] ? f2fs_destroy_stats+0x59/0x60 [f2fs]
[ 293.881437] ? kfree+0x1fe/0x230
[ 293.882674] f2fs_put_super+0x160/0x390 [f2fs]
[ 293.883978] generic_shutdown_super+0x7a/0x120
[ 293.885274] kill_block_super+0x27/0x50
[ 293.886496] kill_f2fs_super+0x7f/0x100 [f2fs]
[ 293.887806] deactivate_locked_super+0x35/0xa0
[ 293.889271] deactivate_super+0x40/0x50
[ 293.890513] cleanup_mnt+0x139/0x190
[ 293.891689] __cleanup_mnt+0x12/0x20
[ 293.892850] task_work_run+0x64/0xa0
[ 293.894035] exit_to_user_mode_prepare+0x1b7/0x1c0
[ 293.895409] syscall_exit_to_user_mode+0x27/0x50
[ 293.896872] do_syscall_64+0x48/0xc0
[ 293.898090] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 293.899517] RIP: 0033:0x7f5a975cd25b
Fixes: 7735730d39d7 ("f2fs: fix to propagate error from __get_meta_page()")
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/inode.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 4557de37a911..6488f5ff250c 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -876,6 +876,7 @@ void f2fs_handle_failed_inode(struct inode *inode)
err = f2fs_get_node_info(sbi, inode->i_ino, &ni);
if (err) {
set_sbi_flag(sbi, SBI_NEED_FSCK);
+ set_inode_flag(inode, FI_FREE_NID);
f2fs_warn(sbi, "May loss orphan inode, run fsck to fix.");
goto out;
}
--
2.34.1
From: Chao Yu <[email protected]>
commit 5b5b4f85b01604389f7a0f11ef180a725bf0e2d4 upstream.
As bughunter reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215709
f2fs may hang when mounting a fuzzed image, the dmesg shows as below:
__filemap_get_folio+0x3a9/0x590
pagecache_get_page+0x18/0x60
__get_meta_page+0x95/0x460 [f2fs]
get_checkpoint_version+0x2a/0x1e0 [f2fs]
validate_checkpoint+0x8e/0x2a0 [f2fs]
f2fs_get_valid_checkpoint+0xd0/0x620 [f2fs]
f2fs_fill_super+0xc01/0x1d40 [f2fs]
mount_bdev+0x18a/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
legacy_get_tree+0x28/0x50
vfs_get_tree+0x27/0xc0
path_mount+0x480/0xaa0
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is cp_pack_total_block_count field in checkpoint was fuzzed
to one, as calcuated, two cp pack block locates in the same block address,
so then read latter cp pack block, it will block on the page lock due to
the lock has already held when reading previous cp pack block, fix it by
adding sanity check for cp_pack_total_block_count.
Cc: [email protected]
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/checkpoint.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -867,6 +867,7 @@ static struct page *validate_checkpoint(
struct page *cp_page_1 = NULL, *cp_page_2 = NULL;
struct f2fs_checkpoint *cp_block = NULL;
unsigned long long cur_version = 0, pre_version = 0;
+ unsigned int cp_blocks;
int err;
err = get_checkpoint_version(sbi, cp_addr, &cp_block,
@@ -874,15 +875,16 @@ static struct page *validate_checkpoint(
if (err)
return NULL;
- if (le32_to_cpu(cp_block->cp_pack_total_block_count) >
- sbi->blocks_per_seg) {
+ cp_blocks = le32_to_cpu(cp_block->cp_pack_total_block_count);
+
+ if (cp_blocks > sbi->blocks_per_seg || cp_blocks <= F2FS_CP_PACKS) {
f2fs_warn(sbi, "invalid cp_pack_total_block_count:%u",
le32_to_cpu(cp_block->cp_pack_total_block_count));
goto invalid_cp;
}
pre_version = *version;
- cp_addr += le32_to_cpu(cp_block->cp_pack_total_block_count) - 1;
+ cp_addr += cp_blocks - 1;
err = get_checkpoint_version(sbi, cp_addr, &cp_block,
&cp_page_2, version);
if (err)
From: Alex Deucher <[email protected]>
commit 85ac2021fe3ace59cc0afd6edf005abad35625b0 upstream.
We don't support runtime pm on APUs. They support more
dynamic power savings using clock and powergating.
Reviewed-by: Mario Limonciello <[email protected]>
Tested-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2178,8 +2178,10 @@ static int amdgpu_device_ip_early_init(s
!pci_is_thunderbolt_attached(to_pci_dev(dev->dev)))
adev->flags |= AMD_IS_PX;
- parent = pci_upstream_bridge(adev->pdev);
- adev->has_pr3 = parent ? pci_pr3_present(parent) : false;
+ if (!(adev->flags & AMD_IS_APU)) {
+ parent = pci_upstream_bridge(adev->pdev);
+ adev->has_pr3 = parent ? pci_pr3_present(parent) : false;
+ }
amdgpu_amdkfd_device_probe(adev);
From: Ritesh Harjani <[email protected]>
commit 7af1974af0a9ba8a8ed2e3e947d87dd4d9a78d27 upstream.
ftrace's __print_symbolic() requires that any enum values used in the
symbol to string translation table be wrapped in a TRACE_DEFINE_ENUM
so that the enum value can be decoded from the ftrace ring buffer by
user space tooling.
This patch also fixes few other problems found in this trace point.
e.g. dereferencing structures in TP_printk which should not be done
at any cost.
Also to avoid checkpatch warnings, this patch removes those
whitespaces/tab stops issues.
Cc: [email protected]
Fixes: aa75f4d3daae ("ext4: main fast-commit commit path")
Reported-by: Steven Rostedt <[email protected]>
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/b4b9691414c35c62e570b723e661c80674169f9a.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/trace/events/ext4.h | 80 +++++++++++++++++++++++++++-----------------
1 file changed, 50 insertions(+), 30 deletions(-)
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -95,6 +95,17 @@ TRACE_DEFINE_ENUM(ES_REFERENCED_B);
{ FALLOC_FL_COLLAPSE_RANGE, "COLLAPSE_RANGE"}, \
{ FALLOC_FL_ZERO_RANGE, "ZERO_RANGE"})
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_XATTR);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_CROSS_RENAME);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_JOURNAL_FLAG_CHANGE);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_NOMEM);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_SWAP_BOOT);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_RESIZE);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_RENAME_DIR);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_FALLOC_RANGE);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_INODE_JOURNAL_DATA);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_MAX);
+
#define show_fc_reason(reason) \
__print_symbolic(reason, \
{ EXT4_FC_REASON_XATTR, "XATTR"}, \
@@ -2723,41 +2734,50 @@ TRACE_EVENT(ext4_fc_commit_stop,
#define FC_REASON_NAME_STAT(reason) \
show_fc_reason(reason), \
- __entry->sbi->s_fc_stats.fc_ineligible_reason_count[reason]
+ __entry->fc_ineligible_rc[reason]
TRACE_EVENT(ext4_fc_stats,
- TP_PROTO(struct super_block *sb),
+ TP_PROTO(struct super_block *sb),
+
+ TP_ARGS(sb),
+
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __array(unsigned int, fc_ineligible_rc, EXT4_FC_REASON_MAX)
+ __field(unsigned long, fc_commits)
+ __field(unsigned long, fc_ineligible_commits)
+ __field(unsigned long, fc_numblks)
+ ),
- TP_ARGS(sb),
+ TP_fast_assign(
+ int i;
- TP_STRUCT__entry(
- __field(dev_t, dev)
- __field(struct ext4_sb_info *, sbi)
- __field(int, count)
- ),
-
- TP_fast_assign(
- __entry->dev = sb->s_dev;
- __entry->sbi = EXT4_SB(sb);
- ),
-
- TP_printk("dev %d:%d fc ineligible reasons:\n"
- "%s:%d, %s:%d, %s:%d, %s:%d, %s:%d, %s:%d, %s:%d, %s:%d, %s:%d; "
- "num_commits:%ld, ineligible: %ld, numblks: %ld",
- MAJOR(__entry->dev), MINOR(__entry->dev),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_XATTR),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_CROSS_RENAME),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_JOURNAL_FLAG_CHANGE),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_NOMEM),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_SWAP_BOOT),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_RESIZE),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_RENAME_DIR),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_FALLOC_RANGE),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_INODE_JOURNAL_DATA),
- __entry->sbi->s_fc_stats.fc_num_commits,
- __entry->sbi->s_fc_stats.fc_ineligible_commits,
- __entry->sbi->s_fc_stats.fc_numblks)
+ __entry->dev = sb->s_dev;
+ for (i = 0; i < EXT4_FC_REASON_MAX; i++) {
+ __entry->fc_ineligible_rc[i] =
+ EXT4_SB(sb)->s_fc_stats.fc_ineligible_reason_count[i];
+ }
+ __entry->fc_commits = EXT4_SB(sb)->s_fc_stats.fc_num_commits;
+ __entry->fc_ineligible_commits =
+ EXT4_SB(sb)->s_fc_stats.fc_ineligible_commits;
+ __entry->fc_numblks = EXT4_SB(sb)->s_fc_stats.fc_numblks;
+ ),
+ TP_printk("dev %d,%d fc ineligible reasons:\n"
+ "%s:%u, %s:%u, %s:%u, %s:%u, %s:%u, %s:%u, %s:%u, %s:%u, %s:%u "
+ "num_commits:%lu, ineligible: %lu, numblks: %lu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_XATTR),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_CROSS_RENAME),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_JOURNAL_FLAG_CHANGE),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_NOMEM),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_SWAP_BOOT),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_RESIZE),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_RENAME_DIR),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_FALLOC_RANGE),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_INODE_JOURNAL_DATA),
+ __entry->fc_commits, __entry->fc_ineligible_commits,
+ __entry->fc_numblks)
);
#define DEFINE_TRACE_DENTRY_EVENT(__type) \
From: Armin Wolf <[email protected]>
[ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ]
If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.
Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.
Suggested-by: Guenter Roeck <[email protected]>
Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core)
Signed-off-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/sch56xx-common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
index 40cdadad35e5..f85eede6d766 100644
--- a/drivers/hwmon/sch56xx-common.c
+++ b/drivers/hwmon/sch56xx-common.c
@@ -422,7 +422,7 @@ void sch56xx_watchdog_register(struct device *parent, u16 addr, u32 revision,
data->wddev.max_timeout = 255 * 60;
watchdog_set_nowayout(&data->wddev, nowayout);
if (output_enable & SCH56XX_WDOG_OUTPUT_ENABLE)
- set_bit(WDOG_ACTIVE, &data->wddev.status);
+ set_bit(WDOG_HW_RUNNING, &data->wddev.status);
/* Since the watchdog uses a downcounter there is no register to read
the BIOS set timeout from (if any was set at all) ->
--
2.34.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit e2724cb9f0c406b8fb66efd3aa9e8b3edfd8d5c8 ]
nvme_subsys_check_duplicate_ids should needs to return an error if any of
the identifiers matches, not just if all of them match. But it does not
need to and should not look at the CSI value for this sanity check.
Rewrite the logic to be separate from nvme_ns_ids_equal and optimize it
by reducing duplicate checks for non-present identifiers.
Fixes: ed754e5deeb1 ("nvme: track shared namespaces")
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index e06d6026e7fa..b349e19e745b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1674,13 +1674,6 @@ static void nvme_config_discard(struct gendisk *disk, struct nvme_ns *ns)
blk_queue_max_write_zeroes_sectors(queue, UINT_MAX);
}
-static bool nvme_ns_ids_valid(struct nvme_ns_ids *ids)
-{
- return !uuid_is_null(&ids->uuid) ||
- memchr_inv(ids->nguid, 0, sizeof(ids->nguid)) ||
- memchr_inv(ids->eui64, 0, sizeof(ids->eui64));
-}
-
static bool nvme_ns_ids_equal(struct nvme_ns_ids *a, struct nvme_ns_ids *b)
{
return uuid_equal(&a->uuid, &b->uuid) &&
@@ -3537,12 +3530,21 @@ static struct nvme_ns_head *nvme_find_ns_head(struct nvme_subsystem *subsys,
static int nvme_subsys_check_duplicate_ids(struct nvme_subsystem *subsys,
struct nvme_ns_ids *ids)
{
+ bool has_uuid = !uuid_is_null(&ids->uuid);
+ bool has_nguid = memchr_inv(ids->nguid, 0, sizeof(ids->nguid));
+ bool has_eui64 = memchr_inv(ids->eui64, 0, sizeof(ids->eui64));
struct nvme_ns_head *h;
lockdep_assert_held(&subsys->lock);
list_for_each_entry(h, &subsys->nsheads, entry) {
- if (nvme_ns_ids_valid(ids) && nvme_ns_ids_equal(ids, &h->ids))
+ if (has_uuid && uuid_equal(&ids->uuid, &h->ids.uuid))
+ return -EINVAL;
+ if (has_nguid &&
+ memcmp(&ids->nguid, &h->ids.nguid, sizeof(ids->nguid)) == 0)
+ return -EINVAL;
+ if (has_eui64 &&
+ memcmp(&ids->eui64, &h->ids.eui64, sizeof(ids->eui64)) == 0)
return -EINVAL;
}
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit 973d74e93820d99d8ea203882631c76edab699c9 ]
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index 1cece1a7d3f0..5bbf0d2722e1 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -506,7 +506,6 @@ struct rk_crypto_tmp rk_ecb_des3_ede_alg = {
.exit = rk_ablk_exit_tfm,
.min_keysize = DES3_EDE_KEY_SIZE,
.max_keysize = DES3_EDE_KEY_SIZE,
- .ivsize = DES_BLOCK_SIZE,
.setkey = rk_tdes_setkey,
.encrypt = rk_des3_ede_ecb_encrypt,
.decrypt = rk_des3_ede_ecb_decrypt,
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 38b16d6cfe54c820848bcfc999bc5e8a7da1cefb ]
As the potential failure of the allocation, kmemdup() may return NULL.
Then, 'bin_attr_data_vault.private' will be NULL, but
'bin_attr_data_vault.size' is not 0, which is not consistent.
Therefore, it is better to check the return value of kmemdup() to
avoid the confusion.
Fixes: 0ba13c763aac ("thermal/int340x_thermal: Export GDDV")
Signed-off-by: Jiasheng Jiang <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
index 176b8e5d2124..258f56eba859 100644
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -469,6 +469,11 @@ static void int3400_setup_gddv(struct int3400_thermal_priv *priv)
priv->data_vault = kmemdup(obj->package.elements[0].buffer.pointer,
obj->package.elements[0].buffer.length,
GFP_KERNEL);
+ if (!priv->data_vault) {
+ kfree(buffer.pointer);
+ return;
+ }
+
bin_attr_data_vault.private = priv->data_vault;
bin_attr_data_vault.size = obj->package.elements[0].buffer.length;
kfree(buffer.pointer);
--
2.34.1
From: Liam Beguin <[email protected]>
commit 51593106b608ae4247cc8da928813347da16d025 upstream.
All four scaling coefficients can take signed values.
Make tmp a signed 64-bit integer and switch to div_s64() to preserve
signs during 64-bit divisions.
Fixes: 8b74816b5a9a ("iio: afe: rescale: new driver")
Signed-off-by: Liam Beguin <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/afe/iio-rescale.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -39,7 +39,7 @@ static int rescale_read_raw(struct iio_d
int *val, int *val2, long mask)
{
struct rescale *rescale = iio_priv(indio_dev);
- unsigned long long tmp;
+ s64 tmp;
int ret;
switch (mask) {
@@ -77,10 +77,10 @@ static int rescale_read_raw(struct iio_d
*val2 = rescale->denominator;
return IIO_VAL_FRACTIONAL;
case IIO_VAL_FRACTIONAL_LOG2:
- tmp = *val * 1000000000LL;
- do_div(tmp, rescale->denominator);
+ tmp = (s64)*val * 1000000000LL;
+ tmp = div_s64(tmp, rescale->denominator);
tmp *= rescale->numerator;
- do_div(tmp, 1000000000LL);
+ tmp = div_s64(tmp, 1000000000LL);
*val = tmp;
return ret;
default:
From: Rafał Miłecki <[email protected]>
[ Upstream commit 33826e9c6ba76b265d4e26cb95493fa27ed78974 ]
Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
reset. Actual timers happen to be at block beginning but they only span
across the first 0x28 registers. It means the old block description was
incorrect (size 0x3c).
Drop timers binding for now and use documented TWD binding. Timers
should be properly documented and defined as TWD subnode.
Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: Rafał Miłecki <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 5118816b1ed7..e8907d3fe2d1 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -273,9 +273,9 @@
#size-cells = <1>;
ranges = <0x00 0x00 0xff800000 0x3000>;
- timer: timer@400 {
- compatible = "brcm,bcm6328-timer", "syscon";
- reg = <0x400 0x3c>;
+ twd: timer-mfd@400 {
+ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+ reg = <0x400 0x4c>;
};
gpio0: gpio-controller@500 {
@@ -330,7 +330,7 @@
reboot {
compatible = "syscon-reboot";
- regmap = <&timer>;
+ regmap = <&twd>;
offset = <0x34>;
mask = <1>;
};
--
2.34.1
From: Xiaomeng Tong <[email protected]>
commit 0112f822f8a6d8039c94e0bc9b264d7ffc5d4704 upstream.
The bug is here:
err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);
The list iterator value 'cdev' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'cdev' as a dedicated pointer
to point to the found element. And snd_card_cs423x_pnp() itself
has NULL check for cdev.
Cc: [email protected]
Fixes: c2b73d1458014 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection")
Signed-off-by: Xiaomeng Tong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/isa/cs423x/cs4236.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -494,7 +494,7 @@ static int snd_cs423x_pnpbios_detect(str
static int dev;
int err;
struct snd_card *card;
- struct pnp_dev *cdev;
+ struct pnp_dev *cdev, *iter;
char cid[PNP_ID_LEN];
if (pnp_device_is_isapnp(pdev))
@@ -510,9 +510,11 @@ static int snd_cs423x_pnpbios_detect(str
strcpy(cid, pdev->id[0].id);
cid[5] = '1';
cdev = NULL;
- list_for_each_entry(cdev, &(pdev->protocol->devices), protocol_list) {
- if (!strcmp(cdev->id[0].id, cid))
+ list_for_each_entry(iter, &(pdev->protocol->devices), protocol_list) {
+ if (!strcmp(iter->id[0].id, cid)) {
+ cdev = iter;
break;
+ }
}
err = snd_cs423x_card_new(&pdev->dev, dev, &card);
if (err < 0)
From: Amir Goldstein <[email protected]>
[ Upstream commit 4d2eeafecd6c83b4444db3dc0ada201c89b1aa44 ]
The nfsd file cache table can be pretty large and its allocation
may require as many as 80 contigious pages.
Employ the same fix that was employed for similar issue that was
reported for the reply cache hash table allocation several years ago
by commit 8f97514b423a ("nfsd: more robust allocation failure handling
in nfsd_reply_cache_init").
Fixes: 65294c1f2c5e ("nfsd: add a new struct file caching facility to nfsd")
Link: https://lore.kernel.org/linux-nfs/[email protected]/
Suggested-by: Jeff Layton <[email protected]>
Signed-off-by: Amir Goldstein <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Tested-by: Amir Goldstein <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfsd/filecache.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/nfsd/filecache.c b/fs/nfsd/filecache.c
index be3c1aad50ea..7e23c588f484 100644
--- a/fs/nfsd/filecache.c
+++ b/fs/nfsd/filecache.c
@@ -641,7 +641,7 @@ nfsd_file_cache_init(void)
if (!nfsd_filecache_wq)
goto out;
- nfsd_file_hashtbl = kcalloc(NFSD_FILE_HASH_SIZE,
+ nfsd_file_hashtbl = kvcalloc(NFSD_FILE_HASH_SIZE,
sizeof(*nfsd_file_hashtbl), GFP_KERNEL);
if (!nfsd_file_hashtbl) {
pr_err("nfsd: unable to allocate nfsd_file_hashtbl\n");
@@ -709,7 +709,7 @@ nfsd_file_cache_init(void)
nfsd_file_slab = NULL;
kmem_cache_destroy(nfsd_file_mark_slab);
nfsd_file_mark_slab = NULL;
- kfree(nfsd_file_hashtbl);
+ kvfree(nfsd_file_hashtbl);
nfsd_file_hashtbl = NULL;
destroy_workqueue(nfsd_filecache_wq);
nfsd_filecache_wq = NULL;
@@ -855,7 +855,7 @@ nfsd_file_cache_shutdown(void)
fsnotify_wait_marks_destroyed();
kmem_cache_destroy(nfsd_file_mark_slab);
nfsd_file_mark_slab = NULL;
- kfree(nfsd_file_hashtbl);
+ kvfree(nfsd_file_hashtbl);
nfsd_file_hashtbl = NULL;
destroy_workqueue(nfsd_filecache_wq);
nfsd_filecache_wq = NULL;
--
2.34.1
From: Damien Le Moal <[email protected]>
commit dcf500065fabe27676dfe7b4ba521a4f1e0fc8ac upstream.
The Broadcom bnxt_ptp driver does not compile with GCC 11.2.2 when
CONFIG_WERROR is enabled. The following error is generated:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c: In function ‘bnxt_ptp_enable’:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:400:43: error: array
subscript 255 is above array bounds of ‘struct pps_pin[4]’
[-Werror=array-bounds]
400 | ptp->pps_info.pins[pin_id].event = BNXT_PPS_EVENT_EXTERNAL;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h:75:24: note: while
referencing ‘pins’
75 | struct pps_pin pins[BNXT_MAX_TSIO_PINS];
| ^~~~
cc1: all warnings being treated as errors
This is due to the function ptp_find_pin() returning a pin ID of -1 when
a valid pin is not found and this error never being checked.
Change the TSIO_PIN_VALID() function to also check that a pin ID is not
negative and use this macro in bnxt_ptp_enable() to check the result of
the calls to ptp_find_pin() to return an error early for invalid pins.
This fixes the compilation error.
Cc: <[email protected]>
Fixes: 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins")
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c | 6 +++++-
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h | 2 +-
2 files changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
@@ -331,7 +331,7 @@ static int bnxt_ptp_enable(struct ptp_cl
struct bnxt_ptp_cfg *ptp = container_of(ptp_info, struct bnxt_ptp_cfg,
ptp_info);
struct bnxt *bp = ptp->bp;
- u8 pin_id;
+ int pin_id;
int rc;
switch (rq->type) {
@@ -339,6 +339,8 @@ static int bnxt_ptp_enable(struct ptp_cl
/* Configure an External PPS IN */
pin_id = ptp_find_pin(ptp->ptp_clock, PTP_PF_EXTTS,
rq->extts.index);
+ if (!TSIO_PIN_VALID(pin_id))
+ return -EOPNOTSUPP;
if (!on)
break;
rc = bnxt_ptp_cfg_pin(bp, pin_id, BNXT_PPS_PIN_PPS_IN);
@@ -352,6 +354,8 @@ static int bnxt_ptp_enable(struct ptp_cl
/* Configure a Periodic PPS OUT */
pin_id = ptp_find_pin(ptp->ptp_clock, PTP_PF_PEROUT,
rq->perout.index);
+ if (!TSIO_PIN_VALID(pin_id))
+ return -EOPNOTSUPP;
if (!on)
break;
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
@@ -28,7 +28,7 @@ struct pps_pin {
u8 state;
};
-#define TSIO_PIN_VALID(pin) ((pin) < (BNXT_MAX_TSIO_PINS))
+#define TSIO_PIN_VALID(pin) ((pin) >= 0 && (pin) < (BNXT_MAX_TSIO_PINS))
#define EVENT_DATA2_PPS_EVENT_TYPE(data2) \
((data2) & ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE)
From: Sean Young <[email protected]>
commit 5ad05ecad4326ddaa26a83ba2233a67be24c1aaa upstream.
Calling udelay for than 1000us does not always yield the correct
results.
Cc: [email protected]
Reported-by: Михаил <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/gpio-ir-tx.c | 28 +++++++++++++++++++++-------
1 file changed, 21 insertions(+), 7 deletions(-)
--- a/drivers/media/rc/gpio-ir-tx.c
+++ b/drivers/media/rc/gpio-ir-tx.c
@@ -48,11 +48,29 @@ static int gpio_ir_tx_set_carrier(struct
return 0;
}
+static void delay_until(ktime_t until)
+{
+ /*
+ * delta should never exceed 0.5 seconds (IR_MAX_DURATION) and on
+ * m68k ndelay(s64) does not compile; so use s32 rather than s64.
+ */
+ s32 delta;
+
+ while (true) {
+ delta = ktime_us_delta(until, ktime_get());
+ if (delta <= 0)
+ return;
+
+ /* udelay more than 1ms may not work */
+ delta = min(delta, 1000);
+ udelay(delta);
+ }
+}
+
static void gpio_ir_tx_unmodulated(struct gpio_ir *gpio_ir, uint *txbuf,
uint count)
{
ktime_t edge;
- s32 delta;
int i;
local_irq_disable();
@@ -63,9 +81,7 @@ static void gpio_ir_tx_unmodulated(struc
gpiod_set_value(gpio_ir->gpio, !(i % 2));
edge = ktime_add_us(edge, txbuf[i]);
- delta = ktime_us_delta(edge, ktime_get());
- if (delta > 0)
- udelay(delta);
+ delay_until(edge);
}
gpiod_set_value(gpio_ir->gpio, 0);
@@ -97,9 +113,7 @@ static void gpio_ir_tx_modulated(struct
if (i % 2) {
// space
edge = ktime_add_us(edge, txbuf[i]);
- delta = ktime_us_delta(edge, ktime_get());
- if (delta > 0)
- udelay(delta);
+ delay_until(edge);
} else {
// pulse
ktime_t last = ktime_add_us(edge, txbuf[i]);
From: Randy Dunlap <[email protected]>
[ Upstream commit ba7ffcd4c4da374b0f64666354eeeda7d3827131 ]
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.
Fixes: 317cf7e5e85e3 ("PM / hibernate: convert simple_strtoul to kstrtoul")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/power/hibernate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index b0888e9224da..d926852f8119 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -1326,7 +1326,7 @@ static int __init resumedelay_setup(char *str)
int rc = kstrtouint(str, 0, &resume_delay);
if (rc)
- return rc;
+ pr_warn("resumedelay: bad option string '%s'\n", str);
return 1;
}
--
2.34.1
From: Andreas Rammhold <[email protected]>
[ Upstream commit 969a26446bcd142faedfe8c6f41cd7668596c1fa ]
Before this commit the kernel could end up with no trusted key sources
even though both of the currently supported backends (TPM and TEE) were
compiled as modules. This manifested in the trusted key type not being
registered at all.
When checking if a CONFIG_… preprocessor variable is defined we only
test for the builtin (=y) case and not the module (=m) case. By using
the IS_REACHABLE() macro we do test for both cases.
Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Reviewed-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Ahmad Fatoum <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Andreas Rammhold <[email protected]>
Tested-by: Ahmad Fatoum <[email protected]>
Signed-off-by: Ahmad Fatoum <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/keys/trusted-keys/trusted_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/keys/trusted-keys/trusted_core.c b/security/keys/trusted-keys/trusted_core.c
index d5c891d8d353..5b35f1b87644 100644
--- a/security/keys/trusted-keys/trusted_core.c
+++ b/security/keys/trusted-keys/trusted_core.c
@@ -27,10 +27,10 @@ module_param_named(source, trusted_key_source, charp, 0);
MODULE_PARM_DESC(source, "Select trusted keys source (tpm or tee)");
static const struct trusted_key_source trusted_key_sources[] = {
-#if defined(CONFIG_TCG_TPM)
+#if IS_REACHABLE(CONFIG_TCG_TPM)
{ "tpm", &trusted_key_tpm_ops },
#endif
-#if defined(CONFIG_TEE)
+#if IS_REACHABLE(CONFIG_TEE)
{ "tee", &trusted_key_tee_ops },
#endif
};
--
2.34.1
From: Shawn Guo <[email protected]>
commit f6bfe8b5b2c2a5ac8bd2fc7bca3706e6c3fc26d8 upstream.
When a genpd with GENPD_FLAG_IRQ_SAFE gets removed, the following
sleep-in-atomic bug will be seen, as genpd_debug_remove() will be called
with a spinlock being held.
[ 0.029183] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1460
[ 0.029204] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[ 0.029219] preempt_count: 1, expected: 0
[ 0.029230] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4+ #489
[ 0.029245] Hardware name: Thundercomm TurboX CM2290 (DT)
[ 0.029256] Call trace:
[ 0.029265] dump_backtrace.part.0+0xbc/0xd0
[ 0.029285] show_stack+0x3c/0xa0
[ 0.029298] dump_stack_lvl+0x7c/0xa0
[ 0.029311] dump_stack+0x18/0x34
[ 0.029323] __might_resched+0x10c/0x13c
[ 0.029338] __might_sleep+0x4c/0x80
[ 0.029351] down_read+0x24/0xd0
[ 0.029363] lookup_one_len_unlocked+0x9c/0xcc
[ 0.029379] lookup_positive_unlocked+0x10/0x50
[ 0.029392] debugfs_lookup+0x68/0xac
[ 0.029406] genpd_remove.part.0+0x12c/0x1b4
[ 0.029419] of_genpd_remove_last+0xa8/0xd4
[ 0.029434] psci_cpuidle_domain_probe+0x174/0x53c
[ 0.029449] platform_probe+0x68/0xe0
[ 0.029462] really_probe+0x190/0x430
[ 0.029473] __driver_probe_device+0x90/0x18c
[ 0.029485] driver_probe_device+0x40/0xe0
[ 0.029497] __driver_attach+0xf4/0x1d0
[ 0.029508] bus_for_each_dev+0x70/0xd0
[ 0.029523] driver_attach+0x24/0x30
[ 0.029534] bus_add_driver+0x164/0x22c
[ 0.029545] driver_register+0x78/0x130
[ 0.029556] __platform_driver_register+0x28/0x34
[ 0.029569] psci_idle_init_domains+0x1c/0x28
[ 0.029583] do_one_initcall+0x50/0x1b0
[ 0.029595] kernel_init_freeable+0x214/0x280
[ 0.029609] kernel_init+0x2c/0x13c
[ 0.029622] ret_from_fork+0x10/0x20
It doesn't seem necessary to call genpd_debug_remove() with the lock, so
move it out from locking to fix the problem.
Fixes: 718072ceb211 ("PM: domains: create debugfs nodes when adding power domains")
Signed-off-by: Shawn Guo <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Cc: 5.11+ <[email protected]> # 5.11+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/domain.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -2058,9 +2058,9 @@ static int genpd_remove(struct generic_p
kfree(link);
}
- genpd_debug_remove(genpd);
list_del(&genpd->gpd_list_node);
genpd_unlock(genpd);
+ genpd_debug_remove(genpd);
cancel_work_sync(&genpd->power_off_work);
if (genpd_is_cpu_domain(genpd))
free_cpumask_var(genpd->cpus);
From: Chao Yu <[email protected]>
[ Upstream commit 344150999b7fc88502a65bbb147a47503eca2033 ]
Quoted from Jing Xia's report, there is a potential deadlock may happen
between kworker and checkpoint as below:
[T:writeback] [T:checkpoint]
- wb_writeback
- blk_start_plug
bio contains NodeA was plugged in writeback threads
- do_writepages -- sync write inodeB, inc wb_sync_req[DATA]
- f2fs_write_data_pages
- f2fs_write_single_data_page -- write last dirty page
- f2fs_do_write_data_page
- set_page_writeback -- clear page dirty flag and
PAGECACHE_TAG_DIRTY tag in radix tree
- f2fs_outplace_write_data
- f2fs_update_data_blkaddr
- f2fs_wait_on_page_writeback -- wait NodeA to writeback here
- inode_dec_dirty_pages
- writeback_sb_inodes
- writeback_single_inode
- do_writepages
- f2fs_write_data_pages -- skip writepages due to wb_sync_req[DATA]
- wbc->pages_skipped += get_dirty_pages() -- PAGECACHE_TAG_DIRTY is not set but get_dirty_pages() returns one
- requeue_inode -- requeue inode to wb->b_dirty queue due to non-zero.pages_skipped
- blk_finish_plug
Let's try to avoid deadlock condition by forcing unplugging previous bio via
blk_finish_plug(current->plug) once we'v skipped writeback in writepages()
due to valid sbi->wb_sync_req[DATA/NODE].
Fixes: 687de7f1010c ("f2fs: avoid IO split due to mixed WB_SYNC_ALL and WB_SYNC_NONE")
Signed-off-by: Zhiguo Niu <[email protected]>
Signed-off-by: Jing Xia <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/data.c | 6 +++++-
fs/f2fs/node.c | 6 +++++-
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index e662355cf8c9..f6e9fc36b837 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -3214,8 +3214,12 @@ static int __f2fs_write_data_pages(struct address_space *mapping,
/* to avoid spliting IOs due to mixed WB_SYNC_ALL and WB_SYNC_NONE */
if (wbc->sync_mode == WB_SYNC_ALL)
atomic_inc(&sbi->wb_sync_req[DATA]);
- else if (atomic_read(&sbi->wb_sync_req[DATA]))
+ else if (atomic_read(&sbi->wb_sync_req[DATA])) {
+ /* to avoid potential deadlock */
+ if (current->plug)
+ blk_finish_plug(current->plug);
goto skip_write;
+ }
if (__should_serialize_io(inode, wbc)) {
mutex_lock(&sbi->writepages);
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 556fcd8457f3..69c6bcaf5aae 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -2106,8 +2106,12 @@ static int f2fs_write_node_pages(struct address_space *mapping,
if (wbc->sync_mode == WB_SYNC_ALL)
atomic_inc(&sbi->wb_sync_req[NODE]);
- else if (atomic_read(&sbi->wb_sync_req[NODE]))
+ else if (atomic_read(&sbi->wb_sync_req[NODE])) {
+ /* to avoid potential deadlock */
+ if (current->plug)
+ blk_finish_plug(current->plug);
goto skip_write;
+ }
trace_f2fs_writepages(mapping->host, wbc, NODE);
--
2.34.1
From: Mike Snitzer <[email protected]>
commit 0cdb90f0f306384ecbc60dfd6dc48cdbc1f2d0d8 upstream.
dm_stats_account_io()'s STAT_PRECISE_TIMESTAMPS support doesn't handle
the fact that with commit b879f915bc48 ("dm: properly fix redundant
bio-based IO accounting") io->start_time _may_ be in the past (meaning
the start_io_acct() was deferred until later).
Add a new dm_stats_recalc_precise_timestamps() helper that will
set/clear a new 'precise_timestamps' flag in the dm_stats struct based
on whether any configured stats enable STAT_PRECISE_TIMESTAMPS.
And update DM core's alloc_io() to use dm_stats_record_start() to set
stats_aux.duration_ns if stats->precise_timestamps is true.
Also, remove unused 'last_sector' and 'last_rw' members from the
dm_stats struct.
Fixes: b879f915bc48 ("dm: properly fix redundant bio-based IO accounting")
Cc: [email protected]
Co-developed-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-stats.c | 28 +++++++++++++++++++++++++---
drivers/md/dm-stats.h | 9 +++++++--
drivers/md/dm.c | 2 ++
3 files changed, 34 insertions(+), 5 deletions(-)
--- a/drivers/md/dm-stats.c
+++ b/drivers/md/dm-stats.c
@@ -195,6 +195,7 @@ void dm_stats_init(struct dm_stats *stat
mutex_init(&stats->mutex);
INIT_LIST_HEAD(&stats->list);
+ stats->precise_timestamps = false;
stats->last = alloc_percpu(struct dm_stats_last_position);
for_each_possible_cpu(cpu) {
last = per_cpu_ptr(stats->last, cpu);
@@ -231,6 +232,22 @@ void dm_stats_cleanup(struct dm_stats *s
mutex_destroy(&stats->mutex);
}
+static void dm_stats_recalc_precise_timestamps(struct dm_stats *stats)
+{
+ struct list_head *l;
+ struct dm_stat *tmp_s;
+ bool precise_timestamps = false;
+
+ list_for_each(l, &stats->list) {
+ tmp_s = container_of(l, struct dm_stat, list_entry);
+ if (tmp_s->stat_flags & STAT_PRECISE_TIMESTAMPS) {
+ precise_timestamps = true;
+ break;
+ }
+ }
+ stats->precise_timestamps = precise_timestamps;
+}
+
static int dm_stats_create(struct dm_stats *stats, sector_t start, sector_t end,
sector_t step, unsigned stat_flags,
unsigned n_histogram_entries,
@@ -376,6 +393,9 @@ static int dm_stats_create(struct dm_sta
}
ret_id = s->id;
list_add_tail_rcu(&s->list_entry, l);
+
+ dm_stats_recalc_precise_timestamps(stats);
+
mutex_unlock(&stats->mutex);
resume_callback(md);
@@ -418,6 +438,9 @@ static int dm_stats_delete(struct dm_sta
}
list_del_rcu(&s->list_entry);
+
+ dm_stats_recalc_precise_timestamps(stats);
+
mutex_unlock(&stats->mutex);
/*
@@ -654,9 +677,8 @@ void dm_stats_account_io(struct dm_stats
got_precise_time = false;
list_for_each_entry_rcu(s, &stats->list, list_entry) {
if (s->stat_flags & STAT_PRECISE_TIMESTAMPS && !got_precise_time) {
- if (!end)
- stats_aux->duration_ns = ktime_to_ns(ktime_get());
- else
+ /* start (!end) duration_ns is set by DM core's alloc_io() */
+ if (end)
stats_aux->duration_ns = ktime_to_ns(ktime_get()) - stats_aux->duration_ns;
got_precise_time = true;
}
--- a/drivers/md/dm-stats.h
+++ b/drivers/md/dm-stats.h
@@ -13,8 +13,7 @@ struct dm_stats {
struct mutex mutex;
struct list_head list; /* list of struct dm_stat */
struct dm_stats_last_position __percpu *last;
- sector_t last_sector;
- unsigned last_rw;
+ bool precise_timestamps;
};
struct dm_stats_aux {
@@ -40,4 +39,10 @@ static inline bool dm_stats_used(struct
return !list_empty(&st->list);
}
+static inline void dm_stats_record_start(struct dm_stats *stats, struct dm_stats_aux *aux)
+{
+ if (unlikely(stats->precise_timestamps))
+ aux->duration_ns = ktime_to_ns(ktime_get());
+}
+
#endif
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -537,6 +537,8 @@ static struct dm_io *alloc_io(struct map
io->start_time = jiffies;
+ dm_stats_record_start(&md->stats, &io->stats_aux);
+
return io;
}
From: Shijith Thotton <[email protected]>
[ Upstream commit 2d841af23ae8f398c85dd1ff2dc24b5ec8ba4569 ]
No issues were found while using the driver with dm-crypt enabled. So
CONFIG_DM_CRYPT check in the driver can be removed.
This also fixes the NULL pointer dereference in driver release if
CONFIG_DM_CRYPT is enabled.
...
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
Call trace:
crypto_unregister_alg+0x68/0xfc
crypto_unregister_skciphers+0x44/0x60
otx2_cpt_crypto_exit+0x100/0x1a0
otx2_cptvf_remove+0xf8/0x200
pci_device_remove+0x3c/0xd4
__device_release_driver+0x188/0x234
device_release_driver+0x2c/0x4c
...
Fixes: 6f03f0e8b6c8 ("crypto: octeontx2 - register with linux crypto framework")
Signed-off-by: Shijith Thotton <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../crypto/marvell/octeontx2/otx2_cptvf_algs.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c b/drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c
index 877a948469bd..570074e23b60 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c
@@ -1634,16 +1634,13 @@ static inline int cpt_register_algs(void)
{
int i, err = 0;
- if (!IS_ENABLED(CONFIG_DM_CRYPT)) {
- for (i = 0; i < ARRAY_SIZE(otx2_cpt_skciphers); i++)
- otx2_cpt_skciphers[i].base.cra_flags &=
- ~CRYPTO_ALG_DEAD;
-
- err = crypto_register_skciphers(otx2_cpt_skciphers,
- ARRAY_SIZE(otx2_cpt_skciphers));
- if (err)
- return err;
- }
+ for (i = 0; i < ARRAY_SIZE(otx2_cpt_skciphers); i++)
+ otx2_cpt_skciphers[i].base.cra_flags &= ~CRYPTO_ALG_DEAD;
+
+ err = crypto_register_skciphers(otx2_cpt_skciphers,
+ ARRAY_SIZE(otx2_cpt_skciphers));
+ if (err)
+ return err;
for (i = 0; i < ARRAY_SIZE(otx2_cpt_aeads); i++)
otx2_cpt_aeads[i].base.cra_flags &= ~CRYPTO_ALG_DEAD;
--
2.34.1
From: Peng Liu <[email protected]>
[ Upstream commit bdd015f7b71b92c2e4ecabac689642cc72553e04 ]
In function kunit_test_timeout, it is declared "300 * MSEC_PER_SEC"
represent 5min. However, it is wrong when dealing with arm64 whose
default HZ = 250, or some other situations. Use msecs_to_jiffies to fix
this, and kunit_test_timeout will work as desired.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 5f3e06208920 ("kunit: test: add support for test abort")
Signed-off-by: Peng Liu <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Daniel Latypov <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Wang Kefeng <[email protected]>
Cc: David Gow <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/kunit/try-catch.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/kunit/try-catch.c b/lib/kunit/try-catch.c
index 0dd434e40487..71e5c5853099 100644
--- a/lib/kunit/try-catch.c
+++ b/lib/kunit/try-catch.c
@@ -52,7 +52,7 @@ static unsigned long kunit_test_timeout(void)
* If tests timeout due to exceeding sysctl_hung_task_timeout_secs,
* the task will be killed and an oops generated.
*/
- return 300 * MSEC_PER_SEC; /* 5 min */
+ return 300 * msecs_to_jiffies(MSEC_PER_SEC); /* 5 min */
}
void kunit_try_catch_run(struct kunit_try_catch *try_catch, void *context)
--
2.34.1
From: Qu Wenruo <[email protected]>
commit 3777369ff1518b579560611a0d0c33f930154f64 upstream.
[BUG]
There is a bug report that a bitflip in the transid part of an extent
buffer makes btrfs to reject certain tree blocks:
BTRFS error (device dm-0): parent transid verify failed on 1382301696 wanted 262166 found 22
[CAUSE]
Note the failed transid check, hex(262166) = 0x40016, while
hex(22) = 0x16.
It's an obvious bitflip.
Furthermore, the reporter also confirmed the bitflip is from the
hardware, so it's a real hardware caused bitflip, and such problem can
not be detected by the existing tree-checker framework.
As tree-checker can only verify the content inside one tree block, while
generation of a tree block can only be verified against its parent.
So such problem remain undetected.
[FIX]
Although tree-checker can not verify it at write-time, we still have a
quick (but not the most accurate) way to catch such obvious corruption.
Function csum_one_extent_buffer() is called before we submit metadata
write.
Thus it means, all the extent buffer passed in should be dirty tree
blocks, and should be newer than last committed transaction.
Using that we can catch the above bitflip.
Although it's not a perfect solution, as if the corrupted generation is
higher than the correct value, we have no way to catch it at all.
Reported-by: Christoph Anton Mitterer <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
CC: [email protected] # 5.15+
Signed-off-by: Qu Wenruo <wqu@sus,ree.com>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/disk-io.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -441,17 +441,31 @@ static int csum_one_extent_buffer(struct
else
ret = btrfs_check_leaf_full(eb);
- if (ret < 0) {
- btrfs_print_tree(eb, 0);
+ if (ret < 0)
+ goto error;
+
+ /*
+ * Also check the generation, the eb reached here must be newer than
+ * last committed. Or something seriously wrong happened.
+ */
+ if (unlikely(btrfs_header_generation(eb) <= fs_info->last_trans_committed)) {
+ ret = -EUCLEAN;
btrfs_err(fs_info,
- "block=%llu write time tree block corruption detected",
- eb->start);
- WARN_ON(IS_ENABLED(CONFIG_BTRFS_DEBUG));
- return ret;
+ "block=%llu bad generation, have %llu expect > %llu",
+ eb->start, btrfs_header_generation(eb),
+ fs_info->last_trans_committed);
+ goto error;
}
write_extent_buffer(eb, result, 0, fs_info->csum_size);
return 0;
+
+error:
+ btrfs_print_tree(eb, 0);
+ btrfs_err(fs_info, "block=%llu write time tree block corruption detected",
+ eb->start);
+ WARN_ON(IS_ENABLED(CONFIG_BTRFS_DEBUG));
+ return ret;
}
/* Checksum all dirty extent buffers in one bio_vec */
From: Baokun Li <[email protected]>
commit 9cdd3128874f5fe759e2c4e1360ab7fb96a8d1df upstream.
If an error is returned in jffs2_scan_eraseblock() and some memory
has been added to the jffs2_summary *s, we can observe the following
kmemleak report:
--------------------------------------------
unreferenced object 0xffff88812b889c40 (size 64):
comm "mount", pid 692, jiffies 4294838325 (age 34.288s)
hex dump (first 32 bytes):
40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P.
00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................
backtrace:
[<ffffffffae93a3a3>] __kmalloc+0x613/0x910
[<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0
[<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794
[<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267
[<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30
[<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0
[<ffffffffb0315d64>] mtd_get_sb+0x254/0x400
[<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0
[<ffffffffb0316478>] get_tree_mtd+0x498/0x840
[<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30
[<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0
[<ffffffffaea7a98f>] path_mount+0x50f/0x1e50
[<ffffffffaea7c3d7>] do_mount+0x107/0x130
[<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0
[<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160
[<ffffffffb10142f5>] do_syscall_64+0x45/0x70
unreferenced object 0xffff888114b54840 (size 32):
comm "mount", pid 692, jiffies 4294838325 (age 34.288s)
hex dump (first 32 bytes):
c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u..............
00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90
[<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794
[...]
unreferenced object 0xffff888114b57280 (size 32):
comm "mount", pid 692, jiffies 4294838393 (age 34.357s)
hex dump (first 32 bytes):
10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l.............
00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90
[<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794
[...]
unreferenced object 0xffff8881116cd510 (size 16):
comm "mount", pid 692, jiffies 4294838395 (age 34.355s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90
[<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794
[...]
--------------------------------------------
Therefore, we should call jffs2_sum_reset_collected(s) on exit to
release the memory added in s. In addition, a new tag "out_buf" is
added to prevent the NULL pointer reference caused by s being NULL.
(thanks to Zhang Yi for this analysis)
Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Cc: [email protected]
Co-developed-with: Zhihao Cheng <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jffs2/scan.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -136,7 +136,7 @@ int jffs2_scan_medium(struct jffs2_sb_in
if (!s) {
JFFS2_WARNING("Can't allocate memory for summary\n");
ret = -ENOMEM;
- goto out;
+ goto out_buf;
}
}
@@ -275,13 +275,15 @@ int jffs2_scan_medium(struct jffs2_sb_in
}
ret = 0;
out:
+ jffs2_sum_reset_collected(s);
+ kfree(s);
+ out_buf:
if (buf_size)
kfree(flashbuf);
#ifndef __ECOS
else
mtd_unpoint(c->mtd, 0, c->mtd->size);
#endif
- kfree(s);
return ret;
}
From: Dongliang Mu <[email protected]>
[ Upstream commit c08eadca1bdfa099e20a32f8fa4b52b2f672236d ]
The commit 47677e51e2a4("[media] em28xx: Only deallocate struct
em28xx after finishing all extensions") adds kref_get to many init
functions (e.g., em28xx_audio_init). However, kref_init is called too
late in em28xx_usb_probe, since em28xx_init_dev before will invoke
those init functions and call kref_get function. Then refcount bug
occurs in my local syzkaller instance.
Fix it by moving kref_init before em28xx_init_dev. This issue occurs
not only in dev but also dev->dev_next.
Fixes: 47677e51e2a4 ("[media] em28xx: Only deallocate struct em28xx after finishing all extensions")
Reported-by: syzkaller <[email protected]>
Signed-off-by: Dongliang Mu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/em28xx/em28xx-cards.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index ebc430b05f21..c415b1d195c4 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -3931,6 +3931,8 @@ static int em28xx_usb_probe(struct usb_interface *intf,
goto err_free;
}
+ kref_init(&dev->ref);
+
dev->devno = nr;
dev->model = id->driver_info;
dev->alt = -1;
@@ -4031,6 +4033,8 @@ static int em28xx_usb_probe(struct usb_interface *intf,
}
if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) {
+ kref_init(&dev->dev_next->ref);
+
dev->dev_next->ts = SECONDARY_TS;
dev->dev_next->alt = -1;
dev->dev_next->is_audio_only = has_vendor_audio &&
@@ -4085,12 +4089,8 @@ static int em28xx_usb_probe(struct usb_interface *intf,
em28xx_write_reg(dev, 0x0b, 0x82);
mdelay(100);
}
-
- kref_init(&dev->dev_next->ref);
}
- kref_init(&dev->ref);
-
request_modules(dev);
/*
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit c3d66a164c726cc3b072232d3b6d87575d194084 ]
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Acked-by: Dave Gerlach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/ti/wkup_m3_ipc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index 09abd17065ba..8b3ff44fd901 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -449,9 +449,9 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
return PTR_ERR(m3_ipc->ipc_mem_base);
irq = platform_get_irq(pdev, 0);
- if (!irq) {
+ if (irq < 0) {
dev_err(&pdev->dev, "no irq resource\n");
- return -ENXIO;
+ return irq;
}
ret = devm_request_irq(dev, irq, wkup_m3_txev_handler,
--
2.34.1
From: Guillaume Ranquet <[email protected]>
[ Upstream commit 4467b8bad2401794fb89a0268c8c8257180bf60f ]
of_base->base can either be iomapped using of_io_request_and_map() or
of_iomap() depending whether or not an of_base->name has been set.
Thus check of_base->base against NULL as of_iomap() does not return a
PTR_ERR() in case of error.
Fixes: 9aea417afa6b ("clocksource/drivers/timer-of: Don't request the resource by name")
Signed-off-by: Guillaume Ranquet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/timer-of.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
index 529cc6a51cdb..c3f54d9912be 100644
--- a/drivers/clocksource/timer-of.c
+++ b/drivers/clocksource/timer-of.c
@@ -157,9 +157,9 @@ static __init int timer_of_base_init(struct device_node *np,
of_base->base = of_base->name ?
of_io_request_and_map(np, of_base->index, of_base->name) :
of_iomap(np, of_base->index);
- if (IS_ERR(of_base->base)) {
- pr_err("Failed to iomap (%s)\n", of_base->name);
- return PTR_ERR(of_base->base);
+ if (IS_ERR_OR_NULL(of_base->base)) {
+ pr_err("Failed to iomap (%s:%s)\n", np->name, of_base->name);
+ return of_base->base ? PTR_ERR(of_base->base) : -ENOMEM;
}
return 0;
--
2.34.1
From: Linus Walleij <[email protected]>
[ Upstream commit e941dc13fd3717122207d74539ab95da07ef797f ]
I observed the following problem with the BT404 touch pad
running the Phosh UI:
When e.g. typing on the virtual keyboard pressing "g" would
produce "ggg".
After some analysis it turns out the firmware reports that three
fingers hit that coordinate at the same time, finger 0, 2 and
4 (of the five available 0,1,2,3,4).
DOWN
Zinitix-TS 3-0020: finger 0 down (246, 395)
Zinitix-TS 3-0020: finger 1 up (0, 0)
Zinitix-TS 3-0020: finger 2 down (246, 395)
Zinitix-TS 3-0020: finger 3 up (0, 0)
Zinitix-TS 3-0020: finger 4 down (246, 395)
UP
Zinitix-TS 3-0020: finger 0 up (246, 395)
Zinitix-TS 3-0020: finger 2 up (246, 395)
Zinitix-TS 3-0020: finger 4 up (246, 395)
This is one touch and release: i.e. this is all reported on
touch (down) and release.
There is a field in the struct touch_event called finger_cnt
which is actually a bitmask of the fingers active in the
event.
Rename this field finger_mask as this matches the use contents
better, then use for_each_set_bit() to iterate over just the
fingers that are actally active.
Factor out a finger reporting function zinitix_report_fingers()
to handle all fingers.
Also be more careful in reporting finger down/up: we were
reporting every event with input_mt_report_slot_state(..., true);
but this should only be reported on finger down or move,
not on finger up, so also add code to check p->sub_status
to see what is happening and report correctly.
After this my Zinitix BT404 touchscreen report fingers
flawlessly.
The vendor drive I have notably does not use the "finger_cnt"
and contains obviously incorrect code like this:
if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM)
touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM;
As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is
a bitmask this seems quite confused.
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/zinitix.c | 44 +++++++++++++++++++++++------
1 file changed, 35 insertions(+), 9 deletions(-)
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
index 1e70b8d2a8d7..400957f4c8c9 100644
--- a/drivers/input/touchscreen/zinitix.c
+++ b/drivers/input/touchscreen/zinitix.c
@@ -135,7 +135,7 @@ struct point_coord {
struct touch_event {
__le16 status;
- u8 finger_cnt;
+ u8 finger_mask;
u8 time_stamp;
struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM];
};
@@ -311,11 +311,32 @@ static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot,
const struct point_coord *p)
{
+ u16 x, y;
+
+ if (unlikely(!(p->sub_status &
+ (SUB_BIT_UP | SUB_BIT_DOWN | SUB_BIT_MOVE)))) {
+ dev_dbg(&bt541->client->dev, "unknown finger event %#02x\n",
+ p->sub_status);
+ return;
+ }
+
+ x = le16_to_cpu(p->x);
+ y = le16_to_cpu(p->y);
+
input_mt_slot(bt541->input_dev, slot);
- input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true);
- touchscreen_report_pos(bt541->input_dev, &bt541->prop,
- le16_to_cpu(p->x), le16_to_cpu(p->y), true);
- input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, p->width);
+ if (input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER,
+ !(p->sub_status & SUB_BIT_UP))) {
+ touchscreen_report_pos(bt541->input_dev,
+ &bt541->prop, x, y, true);
+ input_report_abs(bt541->input_dev,
+ ABS_MT_TOUCH_MAJOR, p->width);
+ dev_dbg(&bt541->client->dev, "finger %d %s (%u, %u)\n",
+ slot, p->sub_status & SUB_BIT_DOWN ? "down" : "move",
+ x, y);
+ } else {
+ dev_dbg(&bt541->client->dev, "finger %d up (%u, %u)\n",
+ slot, x, y);
+ }
}
static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
@@ -323,6 +344,7 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
struct bt541_ts_data *bt541 = bt541_handler;
struct i2c_client *client = bt541->client;
struct touch_event touch_event;
+ unsigned long finger_mask;
int error;
int i;
@@ -335,10 +357,14 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
goto out;
}
- for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++)
- if (touch_event.point_coord[i].sub_status & SUB_BIT_EXIST)
- zinitix_report_finger(bt541, i,
- &touch_event.point_coord[i]);
+ finger_mask = touch_event.finger_mask;
+ for_each_set_bit(i, &finger_mask, MAX_SUPPORTED_FINGER_NUM) {
+ const struct point_coord *p = &touch_event.point_coord[i];
+
+ /* Only process contacts that are actually reported */
+ if (p->sub_status & SUB_BIT_EXIST)
+ zinitix_report_finger(bt541, i, p);
+ }
input_mt_sync_frame(bt541->input_dev);
input_sync(bt541->input_dev);
--
2.34.1
From: Trond Myklebust <[email protected]>
commit b622ffe1d9ecbac71f0cddb52ff0831efdf8fb83 upstream.
Ensure that we always initialise the 'xattr_support' field in struct
nfs_fsinfo, so that nfs_server_set_fsinfo() doesn't declare our NFSv2/v3
client to be capable of supporting the NFSv4.2 xattr protocol by setting
the NFS_CAP_XATTR capability.
This configuration can cause nfs_do_access() to set access mode bits
that are unsupported by the NFSv3 ACCESS call, which may confuse
spec-compliant servers.
Reported-by: Olga Kornievskaia <[email protected]>
Fixes: b78ef845c35d ("NFSv4.2: query the server for extended attribute support")
Cc: [email protected]
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs3xdr.c | 1 +
fs/nfs/proc.c | 1 +
2 files changed, 2 insertions(+)
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -2228,6 +2228,7 @@ static int decode_fsinfo3resok(struct xd
/* ignore properties */
result->lease_time = 0;
result->change_attr_type = NFS4_CHANGE_TYPE_IS_UNDEFINED;
+ result->xattr_support = 0;
return 0;
}
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -92,6 +92,7 @@ nfs_proc_get_root(struct nfs_server *ser
info->maxfilesize = 0x7FFFFFFF;
info->lease_time = 0;
info->change_attr_type = NFS4_CHANGE_TYPE_IS_UNDEFINED;
+ info->xattr_support = 0;
return 0;
}
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit ab8da93dc06d82f464c47ab30e6c75190702f369 ]
The driver statically defines maximum number of interrupts it can
handle, however it does not respect that limit when configuring them.
When provided with a DTS with more interrupts than assumed, the driver
will overwrite static array mct_irqs leading to silent memory
corruption.
Validate the interrupts coming from DTS to avoid this. This does not
change the fact that such DTS might not boot at all, because it is
simply incompatible, however at least some warning will be printed.
Fixes: 36ba5d527e95 ("ARM: EXYNOS: add device tree support for MCT controller driver")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/exynos_mct.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 857cf12ebe57..cc2a961ddd3b 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -541,6 +541,11 @@ static int __init exynos4_timer_interrupts(struct device_node *np,
* irqs are specified.
*/
nr_irqs = of_irq_count(np);
+ if (nr_irqs > ARRAY_SIZE(mct_irqs)) {
+ pr_err("exynos-mct: too many (%d) interrupts configured in DT\n",
+ nr_irqs);
+ nr_irqs = ARRAY_SIZE(mct_irqs);
+ }
for (i = MCT_L0_IRQ; i < nr_irqs; i++)
mct_irqs[i] = irq_of_parse_and_map(np, i);
@@ -553,11 +558,14 @@ static int __init exynos4_timer_interrupts(struct device_node *np,
mct_irqs[MCT_L0_IRQ], err);
} else {
for_each_possible_cpu(cpu) {
- int mct_irq = mct_irqs[MCT_L0_IRQ + cpu];
+ int mct_irq;
struct mct_clock_event_device *pcpu_mevt =
per_cpu_ptr(&percpu_mct_tick, cpu);
pcpu_mevt->evt.irq = -1;
+ if (MCT_L0_IRQ + cpu >= ARRAY_SIZE(mct_irqs))
+ break;
+ mct_irq = mct_irqs[MCT_L0_IRQ + cpu];
irq_set_status_flags(mct_irq, IRQ_NOAUTOEN);
if (request_irq(mct_irq,
--
2.34.1
From: Alistair Delva <[email protected]>
commit f89672cc3681952f2d06314981a6b45f8b0045d1 upstream.
Check count for 0, to avoid a potential underflow. Make the check the
same as the one in rproc_recovery_write().
Fixes: 3afdc59e4390 ("remoteproc: Add coredump debugfs entry")
Signed-off-by: Alistair Delva <[email protected]>
Cc: Rishabh Bhatnagar <[email protected]>
Cc: [email protected]
Cc: Ohad Ben-Cohen <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Sibi Sankar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/remoteproc/remoteproc_debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -76,7 +76,7 @@ static ssize_t rproc_coredump_write(stru
int ret, err = 0;
char buf[20];
- if (count > sizeof(buf))
+ if (count < 1 || count > sizeof(buf))
return -EINVAL;
ret = copy_from_user(buf, user_buf, count);
From: Vijay Balakrishna <[email protected]>
commit 031495635b4668f94e964e037ca93d0d38bfde58 upstream.
The following patches resulted in deferring crash kernel reservation to
mem_init(), mainly aimed at platforms with DMA memory zones (no IOMMU),
in particular Raspberry Pi 4.
commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32")
commit 8424ecdde7df ("arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges")
commit 0a30c53573b0 ("arm64: mm: Move reserve_crashkernel() into mem_init()")
commit 2687275a5843 ("arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required")
Above changes introduced boot slowdown due to linear map creation for
all the memory banks with NO_BLOCK_MAPPINGS, see discussion[1]. The proposed
changes restore crash kernel reservation to earlier behavior thus avoids
slow boot, particularly for platforms with IOMMU (no DMA memory zones).
Tested changes to confirm no ~150ms boot slowdown on our SoC with IOMMU
and 8GB memory. Also tested with ZONE_DMA and/or ZONE_DMA32 configs to confirm
no regression to deferring scheme of crash kernel memory reservation.
In both cases successfully collected kernel crash dump.
[1] https://lore.kernel.org/all/[email protected]/
Signed-off-by: Vijay Balakrishna <[email protected]>
Cc: [email protected]
Reviewed-by: Pasha Tatashin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[will: Add #ifdef CONFIG_KEXEC_CORE guards to fix 'crashk_res' references in allnoconfig build]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/mm/init.c | 36 ++++++++++++++++++++++++++++++++----
arch/arm64/mm/mmu.c | 32 +++++++++++++++++++++++++++++++-
2 files changed, 63 insertions(+), 5 deletions(-)
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -61,8 +61,34 @@ EXPORT_SYMBOL(memstart_addr);
* unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4).
* In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory,
* otherwise it is empty.
+ *
+ * Memory reservation for crash kernel either done early or deferred
+ * depending on DMA memory zones configs (ZONE_DMA) --
+ *
+ * In absence of ZONE_DMA configs arm64_dma_phys_limit initialized
+ * here instead of max_zone_phys(). This lets early reservation of
+ * crash kernel memory which has a dependency on arm64_dma_phys_limit.
+ * Reserving memory early for crash kernel allows linear creation of block
+ * mappings (greater than page-granularity) for all the memory bank rangs.
+ * In this scheme a comparatively quicker boot is observed.
+ *
+ * If ZONE_DMA configs are defined, crash kernel memory reservation
+ * is delayed until DMA zone memory range size initilazation performed in
+ * zone_sizes_init(). The defer is necessary to steer clear of DMA zone
+ * memory range to avoid overlap allocation. So crash kernel memory boundaries
+ * are not known when mapping all bank memory ranges, which otherwise means
+ * not possible to exclude crash kernel range from creating block mappings
+ * so page-granularity mappings are created for the entire memory range.
+ * Hence a slightly slower boot is observed.
+ *
+ * Note: Page-granularity mapppings are necessary for crash kernel memory
+ * range for shrinking its size via /sys/kernel/kexec_crash_size interface.
*/
-phys_addr_t arm64_dma_phys_limit __ro_after_init;
+#if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32)
+phys_addr_t __ro_after_init arm64_dma_phys_limit;
+#else
+const phys_addr_t arm64_dma_phys_limit = PHYS_MASK + 1;
+#endif
#ifdef CONFIG_KEXEC_CORE
/*
@@ -153,8 +179,6 @@ static void __init zone_sizes_init(unsig
if (!arm64_dma_phys_limit)
arm64_dma_phys_limit = dma32_phys_limit;
#endif
- if (!arm64_dma_phys_limit)
- arm64_dma_phys_limit = PHYS_MASK + 1;
max_zone_pfns[ZONE_NORMAL] = max;
free_area_init(max_zone_pfns);
@@ -352,6 +376,9 @@ void __init arm64_memblock_init(void)
early_init_fdt_scan_reserved_mem();
+ if (!IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32))
+ reserve_crashkernel();
+
high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
}
@@ -398,7 +425,8 @@ void __init bootmem_init(void)
* request_standard_resources() depends on crashkernel's memory being
* reserved, so do it here.
*/
- reserve_crashkernel();
+ if (IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32))
+ reserve_crashkernel();
memblock_dump_all();
}
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -516,7 +516,7 @@ static void __init map_mem(pgd_t *pgdp)
*/
BUILD_BUG_ON(pgd_index(direct_map_end - 1) == pgd_index(direct_map_end));
- if (can_set_direct_map() || crash_mem_map || IS_ENABLED(CONFIG_KFENCE))
+ if (can_set_direct_map() || IS_ENABLED(CONFIG_KFENCE))
flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
/*
@@ -527,6 +527,17 @@ static void __init map_mem(pgd_t *pgdp)
*/
memblock_mark_nomap(kernel_start, kernel_end - kernel_start);
+#ifdef CONFIG_KEXEC_CORE
+ if (crash_mem_map) {
+ if (IS_ENABLED(CONFIG_ZONE_DMA) ||
+ IS_ENABLED(CONFIG_ZONE_DMA32))
+ flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
+ else if (crashk_res.end)
+ memblock_mark_nomap(crashk_res.start,
+ resource_size(&crashk_res));
+ }
+#endif
+
/* map all the memory banks */
for_each_mem_range(i, &start, &end) {
if (start >= end)
@@ -553,6 +564,25 @@ static void __init map_mem(pgd_t *pgdp)
__map_memblock(pgdp, kernel_start, kernel_end,
PAGE_KERNEL, NO_CONT_MAPPINGS);
memblock_clear_nomap(kernel_start, kernel_end - kernel_start);
+
+ /*
+ * Use page-level mappings here so that we can shrink the region
+ * in page granularity and put back unused memory to buddy system
+ * through /sys/kernel/kexec_crash_size interface.
+ */
+#ifdef CONFIG_KEXEC_CORE
+ if (crash_mem_map &&
+ !IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32)) {
+ if (crashk_res.end) {
+ __map_memblock(pgdp, crashk_res.start,
+ crashk_res.end + 1,
+ PAGE_KERNEL,
+ NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
+ memblock_clear_nomap(crashk_res.start,
+ resource_size(&crashk_res));
+ }
+ }
+#endif
}
void mark_rodata_ro(void)
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 0ea5eff7c6063a8f124188424f8e4c6727f35051 ]
Accessing enums using integer would result in array out of bounds access
on platforms like aarch64 where sizeof(long) is 8 compared to enum size
which is 4 bytes.
Fixes: 908e6b1df26e ("ASoC: codecs: lpass-va-macro: Add support to VA Macro")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/lpass-va-macro.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/lpass-va-macro.c b/sound/soc/codecs/lpass-va-macro.c
index 56c93f4465c9..08702a21212c 100644
--- a/sound/soc/codecs/lpass-va-macro.c
+++ b/sound/soc/codecs/lpass-va-macro.c
@@ -780,7 +780,7 @@ static int va_macro_dec_mode_get(struct snd_kcontrol *kcontrol,
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
int path = e->shift_l;
- ucontrol->value.integer.value[0] = va->dec_mode[path];
+ ucontrol->value.enumerated.item[0] = va->dec_mode[path];
return 0;
}
@@ -789,7 +789,7 @@ static int va_macro_dec_mode_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
- int value = ucontrol->value.integer.value[0];
+ int value = ucontrol->value.enumerated.item[0];
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
int path = e->shift_l;
struct va_macro *va = snd_soc_component_get_drvdata(comp);
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit b169b3766242b6f3336e24a6c8ee1522978b57a7 ]
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: f08fcced6d00 ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 3 +++
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 3 +++
2 files changed, 6 insertions(+)
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
index 9ef1c85c4aaa..554e400d41ca 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
@@ -11,6 +11,7 @@
* You could find a link for the datasheet in Documentation/arm/sunxi.rst
*/
+#include <linux/bottom_half.h>
#include <linux/crypto.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
@@ -274,7 +275,9 @@ static int sun8i_ss_handle_cipher_request(struct crypto_engine *engine, void *ar
struct skcipher_request *breq = container_of(areq, struct skcipher_request, base);
err = sun8i_ss_cipher(breq);
+ local_bh_disable();
crypto_finalize_skcipher_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
index 3c073eb3db03..1a71ed49d233 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
@@ -9,6 +9,7 @@
*
* You could find the datasheet in Documentation/arm/sunxi.rst
*/
+#include <linux/bottom_half.h>
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
@@ -442,6 +443,8 @@ int sun8i_ss_hash_run(struct crypto_engine *engine, void *breq)
theend:
kfree(pad);
kfree(result);
+ local_bh_disable();
crypto_finalize_hash_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
--
2.34.1
From: Mingzhe Zou <[email protected]>
commit 887554ab96588de2917b6c8c73e552da082e5368 upstream.
When multiple threads to check btree nodes in parallel, the main
thread wait for all threads to stop or CACHE_SET_IO_DISABLE flag:
wait_event_interruptible(check_state->wait,
atomic_read(&check_state->started) == 0 ||
test_bit(CACHE_SET_IO_DISABLE, &c->flags));
However, the bch_btree_node_read and bch_btree_node_read_done
maybe call bch_cache_set_error, then the CACHE_SET_IO_DISABLE
will be set. If the flag already set, the main thread return
error. At the same time, maybe some threads still running and
read NULL pointer, the kernel will crash.
This patch change the event wait condition, the main thread must
wait for all threads to stop.
Fixes: 8e7102273f597 ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Mingzhe Zou <[email protected]>
Cc: [email protected] # v5.7+
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/btree.c | 6 ++++--
drivers/md/bcache/writeback.c | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -2060,9 +2060,11 @@ int bch_btree_check(struct cache_set *c)
}
}
+ /*
+ * Must wait for all threads to stop.
+ */
wait_event_interruptible(check_state->wait,
- atomic_read(&check_state->started) == 0 ||
- test_bit(CACHE_SET_IO_DISABLE, &c->flags));
+ atomic_read(&check_state->started) == 0);
for (i = 0; i < check_state->total_threads; i++) {
if (check_state->infos[i].result) {
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -998,9 +998,11 @@ void bch_sectors_dirty_init(struct bcach
}
}
+ /*
+ * Must wait for all threads to stop.
+ */
wait_event_interruptible(state->wait,
- atomic_read(&state->started) == 0 ||
- test_bit(CACHE_SET_IO_DISABLE, &c->flags));
+ atomic_read(&state->started) == 0);
out:
kfree(state);
From: Laurent Pinchart <[email protected]>
[ Upstream commit 5be7f8c91d25089be847a71b336c13b5bb0db772 ]
When multiple CSIS instances are present in a single graph, they are
currently all named "imx7-mipi-csis.0", which breaks the entity name
uniqueness requirement. Fix it by using the device name to create the
subdev name.
Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Rui Miguel Silva <[email protected]>
Reviewed-by: Sakari Ailus <[email protected]>
Reviewed-by: Jerome Brunet <[email protected]>
Tested-by: Jerome Brunet <[email protected]> # On i.MX8MP
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/imx/imx7-mipi-csis.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 41e33535de55..d35e52374116 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -32,7 +32,6 @@
#include <media/v4l2-subdev.h>
#define CSIS_DRIVER_NAME "imx7-mipi-csis"
-#define CSIS_SUBDEV_NAME CSIS_DRIVER_NAME
#define CSIS_PAD_SINK 0
#define CSIS_PAD_SOURCE 1
@@ -311,7 +310,6 @@ struct csi_state {
struct reset_control *mrst;
struct regulator *mipi_phy_regulator;
const struct mipi_csis_info *info;
- u8 index;
struct v4l2_subdev sd;
struct media_pad pads[CSIS_PADS_NUM];
@@ -1303,8 +1301,8 @@ static int mipi_csis_subdev_init(struct csi_state *state)
v4l2_subdev_init(sd, &mipi_csis_subdev_ops);
sd->owner = THIS_MODULE;
- snprintf(sd->name, sizeof(sd->name), "%s.%d",
- CSIS_SUBDEV_NAME, state->index);
+ snprintf(sd->name, sizeof(sd->name), "csis-%s",
+ dev_name(state->dev));
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
sd->ctrl_handler = NULL;
--
2.34.1
From: Quentin Schulz <[email protected]>
commit 10b74af310735860510a533433b1d3ab2e05a138 upstream.
In commit 4e7cf74fa3b2 ("clk: fractional-divider: Export approximation
algorithm to the CCF users"), the code handling the rational best
approximation algorithm was replaced by a call to the core
clk_fractional_divider_general_approximation function which did the same
thing back then.
However, in commit 82f53f9ee577 ("clk: fractional-divider: Introduce
POWER_OF_TWO_PS flag"), this common code was made conditional on
CLK_FRAC_DIVIDER_POWER_OF_TWO_PS flag which was not added back to the
rockchip clock driver.
This broke the ltk050h3146w-a2 MIPI DSI display present on a PX30-based
downstream board.
Let's add the flag to the fractional divider flags so that the original
and intended behavior is brought back to the rockchip clock drivers.
Fixes: 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag")
Cc: [email protected]
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/rockchip/clk.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/clk/rockchip/clk.c
+++ b/drivers/clk/rockchip/clk.c
@@ -180,6 +180,7 @@ static void rockchip_fractional_approxim
unsigned long rate, unsigned long *parent_rate,
unsigned long *m, unsigned long *n)
{
+ struct clk_fractional_divider *fd = to_clk_fd(hw);
unsigned long p_rate, p_parent_rate;
struct clk_hw *p_parent;
@@ -190,6 +191,8 @@ static void rockchip_fractional_approxim
*parent_rate = p_parent_rate;
}
+ fd->flags |= CLK_FRAC_DIVIDER_POWER_OF_TWO_PS;
+
clk_fractional_divider_general_approximation(hw, rate, parent_rate, m, n);
}
From: Christoph Hellwig <[email protected]>
[ Upstream commit fd8099e7918cd2df39ef306dd1d1af7178a15b81 ]
Pass the actual nvme_ns_ids used for the comparison instead of the
ns_head that isn't needed and use a more descriptive function name.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index d5d5d035d677..e06d6026e7fa 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3534,16 +3534,15 @@ static struct nvme_ns_head *nvme_find_ns_head(struct nvme_subsystem *subsys,
return NULL;
}
-static int __nvme_check_ids(struct nvme_subsystem *subsys,
- struct nvme_ns_head *new)
+static int nvme_subsys_check_duplicate_ids(struct nvme_subsystem *subsys,
+ struct nvme_ns_ids *ids)
{
struct nvme_ns_head *h;
lockdep_assert_held(&subsys->lock);
list_for_each_entry(h, &subsys->nsheads, entry) {
- if (nvme_ns_ids_valid(&new->ids) &&
- nvme_ns_ids_equal(&new->ids, &h->ids))
+ if (nvme_ns_ids_valid(ids) && nvme_ns_ids_equal(ids, &h->ids))
return -EINVAL;
}
@@ -3642,7 +3641,7 @@ static struct nvme_ns_head *nvme_alloc_ns_head(struct nvme_ctrl *ctrl,
head->ids = *ids;
kref_init(&head->ref);
- ret = __nvme_check_ids(ctrl->subsys, head);
+ ret = nvme_subsys_check_duplicate_ids(ctrl->subsys, &head->ids);
if (ret) {
dev_err(ctrl->device,
"duplicate IDs for nsid %d\n", nsid);
--
2.34.1
From: Neil Armstrong <[email protected]>
[ Upstream commit 79e8c421a099bfbcebe59740153e55aa0442ced6 ]
The CLIP, SRC & DST registers are coded to take the pixel/line start & end,
starting from 0. Thus the end should be the width/height minus 1.
It can be an issue with clipping and rotation, where it will add spurious
lines from uninitialized or unwanted data with a shift in the result.
Fixes: 59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/meson/ge2d/ge2d.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/media/platform/meson/ge2d/ge2d.c b/drivers/media/platform/meson/ge2d/ge2d.c
index 9b1e973e78da..a373dea9866b 100644
--- a/drivers/media/platform/meson/ge2d/ge2d.c
+++ b/drivers/media/platform/meson/ge2d/ge2d.c
@@ -215,35 +215,35 @@ static void ge2d_hw_start(struct meson_ge2d *ge2d)
regmap_write(ge2d->map, GE2D_SRC1_CLIPY_START_END,
FIELD_PREP(GE2D_START, ctx->in.crop.top) |
- FIELD_PREP(GE2D_END, ctx->in.crop.top + ctx->in.crop.height));
+ FIELD_PREP(GE2D_END, ctx->in.crop.top + ctx->in.crop.height - 1));
regmap_write(ge2d->map, GE2D_SRC1_CLIPX_START_END,
FIELD_PREP(GE2D_START, ctx->in.crop.left) |
- FIELD_PREP(GE2D_END, ctx->in.crop.left + ctx->in.crop.width));
+ FIELD_PREP(GE2D_END, ctx->in.crop.left + ctx->in.crop.width - 1));
regmap_write(ge2d->map, GE2D_SRC2_CLIPY_START_END,
FIELD_PREP(GE2D_START, ctx->out.crop.top) |
- FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height));
+ FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height - 1));
regmap_write(ge2d->map, GE2D_SRC2_CLIPX_START_END,
FIELD_PREP(GE2D_START, ctx->out.crop.left) |
- FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width));
+ FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width - 1));
regmap_write(ge2d->map, GE2D_DST_CLIPY_START_END,
FIELD_PREP(GE2D_START, ctx->out.crop.top) |
- FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height));
+ FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height - 1));
regmap_write(ge2d->map, GE2D_DST_CLIPX_START_END,
FIELD_PREP(GE2D_START, ctx->out.crop.left) |
- FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width));
+ FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width - 1));
regmap_write(ge2d->map, GE2D_SRC1_Y_START_END,
- FIELD_PREP(GE2D_END, ctx->in.pix_fmt.height));
+ FIELD_PREP(GE2D_END, ctx->in.pix_fmt.height - 1));
regmap_write(ge2d->map, GE2D_SRC1_X_START_END,
- FIELD_PREP(GE2D_END, ctx->in.pix_fmt.width));
+ FIELD_PREP(GE2D_END, ctx->in.pix_fmt.width - 1));
regmap_write(ge2d->map, GE2D_SRC2_Y_START_END,
- FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height));
+ FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height - 1));
regmap_write(ge2d->map, GE2D_SRC2_X_START_END,
- FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width));
+ FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width - 1));
regmap_write(ge2d->map, GE2D_DST_Y_START_END,
- FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height));
+ FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height - 1));
regmap_write(ge2d->map, GE2D_DST_X_START_END,
- FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width));
+ FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width - 1));
/* Color, no blend, use source color */
reg = GE2D_ALU_DO_COLOR_OPERATION_LOGIC(LOGIC_OPERATION_COPY,
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit dba633342994ce47d347bcf5522ba28301247b79 ]
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/amlogic/amlogic-gxl-cipher.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/crypto/amlogic/amlogic-gxl-cipher.c b/drivers/crypto/amlogic/amlogic-gxl-cipher.c
index c6865cbd334b..e79514fce731 100644
--- a/drivers/crypto/amlogic/amlogic-gxl-cipher.c
+++ b/drivers/crypto/amlogic/amlogic-gxl-cipher.c
@@ -265,7 +265,9 @@ static int meson_handle_cipher_request(struct crypto_engine *engine,
struct skcipher_request *breq = container_of(areq, struct skcipher_request, base);
err = meson_cipher(breq);
+ local_bh_disable();
crypto_finalize_skcipher_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
--
2.34.1
From: Jonathan Marek <[email protected]>
[ Upstream commit 1ce8c48b06f249a9739e36c5d56883f6f49ce047 ]
This function waits for halt_complete but doesn't do anything to cause
it to complete, and always hits the "VFE halt timeout" error. Just delete
this code for now.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Signed-off-by: Jonathan Marek <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Tested-by: Julian Grahsl <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/camss/camss-vfe-170.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index 8594d275b41d..02cb8005504a 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -399,17 +399,7 @@ static irqreturn_t vfe_isr(int irq, void *dev)
*/
static int vfe_halt(struct vfe_device *vfe)
{
- unsigned long time;
-
- reinit_completion(&vfe->halt_complete);
-
- time = wait_for_completion_timeout(&vfe->halt_complete,
- msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
- if (!time) {
- dev_err(vfe->camss->dev, "VFE halt timeout\n");
- return -EIO;
- }
-
+ /* rely on vfe_disable_output() to stop the VFE */
return 0;
}
--
2.34.1
From: Biju Das <[email protected]>
[ Upstream commit ebc4cb43ea5ada3db46c80156fca58a54b9bbca8 ]
While computing sgs in spi_map_buf(), the data type
used in min_t() for max_seg_size is 'unsigned int' where
as that of ctlr->max_dma_len is 'size_t'.
min_t(unsigned int,x,y) gives wrong results if one of x/y is
'size_t'
Consider the below examples on a 64-bit machine (ie size_t is
64-bits, and unsigned int is 32-bit).
case 1) min_t(unsigned int, 5, 0x100000001);
case 2) min_t(size_t, 5, 0x100000001);
Case 1 returns '1', where as case 2 returns '5'. As you can see
the result from case 1 is wrong.
This patch fixes the above issue by using the data type of the
parameters that are used in min_t with maximum data length.
Fixes: commit 1a4e53d2fc4f68aa ("spi: Fix invalid sgs value")
Reported-by: Linus Torvalds <[email protected]>
Suggested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c7c8d13b2f83..cb7eb1e2e0e9 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -942,10 +942,10 @@ int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
int i, ret;
if (vmalloced_buf || kmap_buf) {
- desc_len = min_t(unsigned int, max_seg_size, PAGE_SIZE);
+ desc_len = min_t(unsigned long, max_seg_size, PAGE_SIZE);
sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
} else if (virt_addr_valid(buf)) {
- desc_len = min_t(unsigned int, max_seg_size, ctlr->max_dma_len);
+ desc_len = min_t(size_t, max_seg_size, ctlr->max_dma_len);
sgs = DIV_ROUND_UP(len, desc_len);
} else {
return -EINVAL;
--
2.34.1
From: Bagas Sanjaya <[email protected]>
commit 555d44932c67e617d89bc13c81c7efac5b51fcfa upstream.
The link to stable tree is redirected to
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git. Update
accordingly.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Bagas Sanjaya <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/process/stable-kernel-rules.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/process/stable-kernel-rules.rst
+++ b/Documentation/process/stable-kernel-rules.rst
@@ -168,7 +168,7 @@ Trees
- The finalized and tagged releases of all stable kernels can be found
in separate branches per version at:
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+ https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
- The release candidate of all stable kernel versions can be found at:
From: Christian Brauner <[email protected]>
commit aea0b9f2486da8497f35c7114b764bf55e17c7ea upstream.
Make the name of the anon inode fd "[landlock-ruleset]" instead of
"landlock-ruleset". This is minor but most anon inode fds already
carry square brackets around their name:
[eventfd]
[eventpoll]
[fanotify]
[fscontext]
[io_uring]
[pidfd]
[signalfd]
[timerfd]
[userfaultfd]
For the sake of consistency lets do the same for the landlock-ruleset anon
inode fd that comes with landlock. We did the same in
1cdc415f1083 ("uapi, fsopen: use square brackets around "fscontext" [ver #2]")
for the new mount api.
Cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Mickaël Salaün <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/landlock/syscalls.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/security/landlock/syscalls.c
+++ b/security/landlock/syscalls.c
@@ -192,7 +192,7 @@ SYSCALL_DEFINE3(landlock_create_ruleset,
return PTR_ERR(ruleset);
/* Creates anonymous FD referring to the ruleset. */
- ruleset_fd = anon_inode_getfd("landlock-ruleset", &ruleset_fops,
+ ruleset_fd = anon_inode_getfd("[landlock-ruleset]", &ruleset_fops,
ruleset, O_RDWR | O_CLOEXEC);
if (ruleset_fd < 0)
landlock_put_ruleset(ruleset);
From: Corentin Labbe <[email protected]>
[ Upstream commit 881fc7fba6c3e7d77d608b9a50b01a89d5e0c61b ]
When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.
Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
index 80e89066dbd1..319fe3279a71 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
@@ -30,6 +30,8 @@
static const struct ss_variant ss_a80_variant = {
.alg_cipher = { SS_ALG_AES, SS_ALG_DES, SS_ALG_3DES,
},
+ .alg_hash = { SS_ID_NOTSUPP, SS_ID_NOTSUPP, SS_ID_NOTSUPP, SS_ID_NOTSUPP,
+ },
.op_mode = { SS_OP_ECB, SS_OP_CBC,
},
.ss_clks = {
--
2.34.1
From: Ammar Faizi <[email protected]>
commit b7fb0ae09009d076964afe4c1a2bde1ee2bd88a9 upstream.
Do not call snd_dma_free_pages() when snd_dma_alloc_pages() returns
-ENOMEM because it leads to a NULL pointer dereference bug.
The dmesg says:
[ T1387] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12
[ T1387] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ T1387] #PF: supervisor read access in kernel mode
[ T1387] #PF: error_code(0x0000) - not-present page
[ T1387] PGD 0 P4D 0
[ T1387] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ T1387] CPU: 6 PID: 1387 Comm: alsa-sink-HDA A Tainted: G W 5.17.0-rc4-superb-owl-00055-g80d47f5de5e3
[ T1387] Hardware name: HP HP Laptop 14s-dq2xxx/87FD, BIOS F.15 09/15/2021
[ T1387] RIP: 0010:dma_free_noncontiguous+0x37/0x80
[ T1387] Code: [... snip ...]
[ T1387] RSP: 0000:ffffc90002b87770 EFLAGS: 00010246
[ T1387] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ T1387] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888101db30d0
[ T1387] RBP: 00000000fffffff4 R08: 0000000000000000 R09: 0000000000000000
[ T1387] R10: 0000000000000000 R11: ffffc90002b874d0 R12: 0000000000000001
[ T1387] R13: 0000000000058000 R14: ffff888105260c68 R15: ffff888105260828
[ T1387] FS: 00007f42e2ffd640(0000) GS:ffff888466b80000(0000) knlGS:0000000000000000
[ T1387] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ T1387] CR2: 0000000000000000 CR3: 000000014acf0003 CR4: 0000000000770ee0
[ T1387] PKRU: 55555554
[ T1387] Call Trace:
[ T1387] <TASK>
[ T1387] cl_stream_prepare+0x10a/0x120 [snd_sof_intel_hda_common 146addf995b9279ae7f509621078cccbe4f875e1]
[... snip ...]
[ T1387] </TASK>
Cc: Daniel Baluta <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Kai Vehmanen <[email protected]>
Cc: Keyon Jie <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Rander Wang <[email protected]>
Cc: Ranjani Sridharan <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] # v5.2+
Fixes: d16046ffa6de040bf580a64d5f4d0aa18258a854 ("ASoC: SOF: Intel: Add Intel specific HDA firmware loader")
Link: https://lore.kernel.org/lkml/[email protected]/ # v1
Link: https://lore.kernel.org/lkml/[email protected]/ # v2
Link: https://lore.kernel.org/lkml/[email protected]/ # v3
Reviewed-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Ammar Faizi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sof/intel/hda-loader.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -48,7 +48,7 @@ static struct hdac_ext_stream *cl_stream
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, &pci->dev, size, dmab);
if (ret < 0) {
dev_err(sdev->dev, "error: memory alloc failed: %d\n", ret);
- goto error;
+ goto out_put;
}
hstream->period_bytes = 0;/* initialize period_bytes */
@@ -59,22 +59,23 @@ static struct hdac_ext_stream *cl_stream
ret = hda_dsp_iccmax_stream_hw_params(sdev, dsp_stream, dmab, NULL);
if (ret < 0) {
dev_err(sdev->dev, "error: iccmax stream prepare failed: %d\n", ret);
- goto error;
+ goto out_free;
}
} else {
ret = hda_dsp_stream_hw_params(sdev, dsp_stream, dmab, NULL);
if (ret < 0) {
dev_err(sdev->dev, "error: hdac prepare failed: %d\n", ret);
- goto error;
+ goto out_free;
}
hda_dsp_stream_spib_config(sdev, dsp_stream, HDA_DSP_SPIB_ENABLE, size);
}
return dsp_stream;
-error:
- hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
+out_free:
snd_dma_free_pages(dmab);
+out_put:
+ hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
return ERR_PTR(ret);
}
From: Hector Martin <[email protected]>
commit 9466987f246758eb7e9071ae58005253f631271e upstream.
The alignment check was wrong (e.g. & 4 instead of & 3), and the logic
was also inefficient if the length was not a multiple of 4, since it
would needlessly fall back to copying the entire buffer bytewise.
We already have a perfectly good memcpy_toio function, so just call that
instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers
was already using it anyway.
Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: [email protected]
Signed-off-by: Hector Martin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 48 +---------------
1 file changed, 4 insertions(+), 44 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/bcma/bcma.h>
#include <linux/sched.h>
+#include <linux/io.h>
#include <asm/unaligned.h>
#include <soc.h>
@@ -455,47 +456,6 @@ brcmf_pcie_write_ram32(struct brcmf_pcie
static void
-brcmf_pcie_copy_mem_todev(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
- void *srcaddr, u32 len)
-{
- void __iomem *address = devinfo->tcm + mem_offset;
- __le32 *src32;
- __le16 *src16;
- u8 *src8;
-
- if (((ulong)address & 4) || ((ulong)srcaddr & 4) || (len & 4)) {
- if (((ulong)address & 2) || ((ulong)srcaddr & 2) || (len & 2)) {
- src8 = (u8 *)srcaddr;
- while (len) {
- iowrite8(*src8, address);
- address++;
- src8++;
- len--;
- }
- } else {
- len = len / 2;
- src16 = (__le16 *)srcaddr;
- while (len) {
- iowrite16(le16_to_cpu(*src16), address);
- address += 2;
- src16++;
- len--;
- }
- }
- } else {
- len = len / 4;
- src32 = (__le32 *)srcaddr;
- while (len) {
- iowrite32(le32_to_cpu(*src32), address);
- address += 4;
- src32++;
- len--;
- }
- }
-}
-
-
-static void
brcmf_pcie_copy_dev_tomem(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
void *dstaddr, u32 len)
{
@@ -1570,8 +1530,8 @@ static int brcmf_pcie_download_fw_nvram(
return err;
brcmf_dbg(PCIE, "Download FW %s\n", devinfo->fw_name);
- brcmf_pcie_copy_mem_todev(devinfo, devinfo->ci->rambase,
- (void *)fw->data, fw->size);
+ memcpy_toio(devinfo->tcm + devinfo->ci->rambase,
+ (void *)fw->data, fw->size);
resetintr = get_unaligned_le32(fw->data);
release_firmware(fw);
@@ -1585,7 +1545,7 @@ static int brcmf_pcie_download_fw_nvram(
brcmf_dbg(PCIE, "Download NVRAM %s\n", devinfo->nvram_name);
address = devinfo->ci->rambase + devinfo->ci->ramsize -
nvram_len;
- brcmf_pcie_copy_mem_todev(devinfo, address, nvram, nvram_len);
+ memcpy_toio(devinfo->tcm + address, nvram, nvram_len);
brcmf_fw_nvram_free(nvram);
} else {
brcmf_dbg(PCIE, "No matching NVRAM file found %s\n",
From: Hector Martin <[email protected]>
commit d19d8e3ba256f81ea4a27209dbbd1f0a00ef1903 upstream.
If boardrev is missing from the NVRAM we add a default one, but this
might need more space in the output buffer than was allocated. Ensure
we have enough padding for this in the buffer.
Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing")
Reviewed-by: Arend van Spriel <[email protected]>
Cc: [email protected]
Signed-off-by: Hector Martin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -207,6 +207,8 @@ static int brcmf_init_nvram_parser(struc
size = BRCMF_FW_MAX_NVRAM_SIZE;
else
size = data_len;
+ /* Add space for properties we may add */
+ size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1;
/* Alloc for extra 0 byte + roundup by 4 + length field */
size += 1 + 3 + sizeof(u32);
nvp->nvram = kzalloc(size, GFP_KERNEL);
From: Robert Hancock <[email protected]>
[ Upstream commit ce2f7b8d4290c22e462e465d1da38a1c113ae66a ]
If an mclk-fs value was provided in the device tree configuration, the
calculated MCLK was fed into the downstream codec DAI and CPU DAI,
however set_sysclk was not being called on the platform device. Some
platform devices such as the Xilinx Audio Formatter need to know the MCLK
as well.
Call snd_soc_component_set_sysclk on each component in the stream to set
the proper sysclk value in addition to the existing call of
snd_soc_dai_set_sysclk on the codec DAI and CPU DAI. This may end up
resulting in redundant calls if one of the snd_soc_dai_set_sysclk calls
ends up calling snd_soc_component_set_sysclk itself, but that isn't
expected to cause any significant harm.
Fixes: f48dcbb6d47d ("ASoC: simple-card-utils: share asoc_simple_hw_param()")
Signed-off-by: Robert Hancock <[email protected]>
Reviewed-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/generic/simple-card-utils.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 10c63b73900c..ffda8a38de3e 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -275,6 +275,7 @@ int asoc_simple_hw_params(struct snd_pcm_substream *substream,
mclk_fs = props->mclk_fs;
if (mclk_fs) {
+ struct snd_soc_component *component;
mclk = params_rate(params) * mclk_fs;
for_each_prop_dai_codec(props, i, pdai) {
@@ -282,16 +283,30 @@ int asoc_simple_hw_params(struct snd_pcm_substream *substream,
if (ret < 0)
return ret;
}
+
for_each_prop_dai_cpu(props, i, pdai) {
ret = asoc_simple_set_clk_rate(pdai, mclk);
if (ret < 0)
return ret;
}
+
+ /* Ensure sysclk is set on all components in case any
+ * (such as platform components) are missed by calls to
+ * snd_soc_dai_set_sysclk.
+ */
+ for_each_rtd_components(rtd, i, component) {
+ ret = snd_soc_component_set_sysclk(component, 0, 0,
+ mclk, SND_SOC_CLOCK_IN);
+ if (ret && ret != -ENOTSUPP)
+ return ret;
+ }
+
for_each_rtd_codec_dais(rtd, i, sdai) {
ret = snd_soc_dai_set_sysclk(sdai, 0, mclk, SND_SOC_CLOCK_IN);
if (ret && ret != -ENOTSUPP)
return ret;
}
+
for_each_rtd_cpu_dais(rtd, i, sdai) {
ret = snd_soc_dai_set_sysclk(sdai, 0, mclk, SND_SOC_CLOCK_OUT);
if (ret && ret != -ENOTSUPP)
--
2.34.1
From: Xie Yongji <[email protected]>
commit 57a13a5b8157d9a8606490aaa1b805bafe6c37e1 upstream.
The block layer can't support a block size larger than
page size yet. And a block size that's too small or
not a power of two won't work either. If a misconfigured
device presents an invalid block size in configuration space,
it will result in the kernel crash something like below:
[ 506.154324] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 506.160416] RIP: 0010:create_empty_buffers+0x24/0x100
[ 506.174302] Call Trace:
[ 506.174651] create_page_buffers+0x4d/0x60
[ 506.175207] block_read_full_page+0x50/0x380
[ 506.175798] ? __mod_lruvec_page_state+0x60/0xa0
[ 506.176412] ? __add_to_page_cache_locked+0x1b2/0x390
[ 506.177085] ? blkdev_direct_IO+0x4a0/0x4a0
[ 506.177644] ? scan_shadow_nodes+0x30/0x30
[ 506.178206] ? lru_cache_add+0x42/0x60
[ 506.178716] do_read_cache_page+0x695/0x740
[ 506.179278] ? read_part_sector+0xe0/0xe0
[ 506.179821] read_part_sector+0x36/0xe0
[ 506.180337] adfspart_check_ICS+0x32/0x320
[ 506.180890] ? snprintf+0x45/0x70
[ 506.181350] ? read_part_sector+0xe0/0xe0
[ 506.181906] bdev_disk_changed+0x229/0x5c0
[ 506.182483] blkdev_get_whole+0x6d/0x90
[ 506.183013] blkdev_get_by_dev+0x122/0x2d0
[ 506.183562] device_add_disk+0x39e/0x3c0
[ 506.184472] virtblk_probe+0x3f8/0x79b [virtio_blk]
[ 506.185461] virtio_dev_probe+0x15e/0x1d0 [virtio]
So let's use a block layer helper to validate the block size.
Signed-off-by: Xie Yongji <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/virtio_blk.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -815,9 +815,17 @@ static int virtblk_probe(struct virtio_d
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_BLK_SIZE,
struct virtio_blk_config, blk_size,
&blk_size);
- if (!err)
+ if (!err) {
+ err = blk_validate_block_size(blk_size);
+ if (err) {
+ dev_err(&vdev->dev,
+ "virtio_blk: invalid block size: 0x%x\n",
+ blk_size);
+ goto out_cleanup_disk;
+ }
+
blk_queue_logical_block_size(q, blk_size);
- else
+ } else
blk_size = queue_logical_block_size(q);
/* Use topology information if available */
From: Lars Ellenberg <[email protected]>
commit f4329d1f848ac35757d9cc5487669d19dfc5979c upstream.
Scenario:
---------
bio chain generated by blk_queue_split().
Some split bio fails and propagates its error status to the "parent" bio.
But then the (last part of the) parent bio itself completes without error.
We would clobber the already recorded error status with BLK_STS_OK,
causing silent data corruption.
Reproducer:
-----------
How to trigger this in the real world within seconds:
DRBD on top of degraded parity raid,
small stripe_cache_size, large read_ahead setting.
Drop page cache (sysctl vm.drop_caches=1, fadvise "DONTNEED",
umount and mount again, "reboot").
Cause significant read ahead.
Large read ahead request is split by blk_queue_split().
Parts of the read ahead that are already in the stripe cache,
or find an available stripe cache to use, can be serviced.
Parts of the read ahead that would need "too much work",
would need to wait for a "stripe_head" to become available,
are rejected immediately.
For larger read ahead requests that are split in many pieces, it is very
likely that some "splits" will be serviced, but then the stripe cache is
exhausted/busy, and the remaining ones will be rejected.
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Christoph Böhmwalder <[email protected]>
Cc: <[email protected]> # 4.13.x
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/drbd/drbd_req.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -180,7 +180,8 @@ void start_new_tl_epoch(struct drbd_conn
void complete_master_bio(struct drbd_device *device,
struct bio_and_error *m)
{
- m->bio->bi_status = errno_to_blk_status(m->error);
+ if (unlikely(m->error))
+ m->bio->bi_status = errno_to_blk_status(m->error);
bio_endio(m->bio);
dec_ap_bio(device);
}
From: Linus Torvalds <[email protected]>
commit bddac7c1e02ba47f0570e494c9289acea3062cc1 upstream.
This reverts commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13.
It turns out this breaks at least the ath9k wireless driver, and
possibly others.
What the ath9k driver does on packet receive is to set up the DMA
transfer with:
int ath_rx_init(..)
..
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
common->rx_bufsize,
DMA_FROM_DEVICE);
and then the receive logic (through ath_rx_tasklet()) will fetch
incoming packets
static bool ath_edma_get_buffers(..)
..
dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data);
if (ret == -EINPROGRESS) {
/*let device gain the buffer again*/
dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
return false;
}
and it's worth noting how that first DMA sync:
dma_sync_single_for_cpu(..DMA_FROM_DEVICE);
is there to make sure the CPU can read the DMA buffer (possibly by
copying it from the bounce buffer area, or by doing some cache flush).
The iommu correctly turns that into a "copy from bounce bufer" so that
the driver can look at the state of the packets.
In the meantime, the device may continue to write to the DMA buffer, but
we at least have a snapshot of the state due to that first DMA sync.
But that _second_ DMA sync:
dma_sync_single_for_device(..DMA_FROM_DEVICE);
is telling the DMA mapping that the CPU wasn't interested in the area
because the packet wasn't there. In the case of a DMA bounce buffer,
that is a no-op.
Note how it's not a sync for the CPU (the "for_device()" part), and it's
not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part).
Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab47
broke: it made the code bounce the buffer unconditionally, and changed
the DMA_FROM_DEVICE to just unconditionally and illogically be
DMA_TO_DEVICE.
[ Side note: purely within the confines of the swiotlb driver it wasn't
entirely illogical: The reason it did that odd DMA_FROM_DEVICE ->
DMA_TO_DEVICE conversion thing is because inside the swiotlb driver,
it uses just a swiotlb_bounce() helper that doesn't care about the
whole distinction of who the sync is for - only which direction to
bounce.
So it took the "sync for device" to mean that the CPU must have been
the one writing, and thought it meant DMA_TO_DEVICE. ]
Also note how the commentary in that commit was wrong, probably due to
that whole confusion, claiming that the commit makes the swiotlb code
"bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer"
which is nonsensical for two reasons:
- that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was
exactly when it always did - and should do - the bounce.
- since this is a sync for the device (not for the CPU), we're clearly
fundamentally not coping back stale data from the bounce buffers at
all, because we'd be copying *to* the bounce buffers.
So that commit was just very confused. It confused the direction of the
synchronization (to the device, not the cpu) with the direction of the
DMA (from the device).
Reported-and-bisected-by: Oleksandr Natalenko <[email protected]>
Reported-by: Olha Cherevyk <[email protected]>
Cc: Halil Pasic <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Kalle Valo <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Toke Høiland-Jørgensen <[email protected]>
Cc: Maxime Bizon <[email protected]>
Cc: Johannes Berg <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/core-api/dma-attributes.rst | 8 ++++++++
include/linux/dma-mapping.h | 8 ++++++++
kernel/dma/swiotlb.c | 23 ++++++++---------------
3 files changed, 24 insertions(+), 15 deletions(-)
--- a/Documentation/core-api/dma-attributes.rst
+++ b/Documentation/core-api/dma-attributes.rst
@@ -130,3 +130,11 @@ accesses to DMA buffers in both privileg
subsystem that the buffer is fully accessible at the elevated privilege
level (and ideally inaccessible or at least read-only at the
lesser-privileged levels).
+
+DMA_ATTR_OVERWRITE
+------------------
+
+This is a hint to the DMA-mapping subsystem that the device is expected to
+overwrite the entire mapped size, thus the caller does not require any of the
+previous buffer contents to be preserved. This allows bounce-buffering
+implementations to optimise DMA_FROM_DEVICE transfers.
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -62,6 +62,14 @@
#define DMA_ATTR_PRIVILEGED (1UL << 9)
/*
+ * This is a hint to the DMA-mapping subsystem that the device is expected
+ * to overwrite the entire mapped size, thus the caller does not require any
+ * of the previous buffer contents to be preserved. This allows
+ * bounce-buffering implementations to optimise DMA_FROM_DEVICE transfers.
+ */
+#define DMA_ATTR_OVERWRITE (1UL << 10)
+
+/*
* A dma_addr_t can hold any valid DMA or bus address for the platform. It can
* be given to a device to use as a DMA source or target. It is specific to a
* given device and there may be a translation between the CPU physical address
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -578,14 +578,10 @@ phys_addr_t swiotlb_tbl_map_single(struc
for (i = 0; i < nr_slots(alloc_size + offset); i++)
mem->slots[index + i].orig_addr = slot_addr(orig_addr, i);
tlb_addr = slot_addr(mem->start, index) + offset;
- /*
- * When dir == DMA_FROM_DEVICE we could omit the copy from the orig
- * to the tlb buffer, if we knew for sure the device will
- * overwirte the entire current content. But we don't. Thus
- * unconditional bounce may prevent leaking swiotlb content (i.e.
- * kernel memory) to user-space.
- */
- swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
+ if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
+ (!(attrs & DMA_ATTR_OVERWRITE) || dir == DMA_TO_DEVICE ||
+ dir == DMA_BIDIRECTIONAL))
+ swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
return tlb_addr;
}
@@ -652,13 +648,10 @@ void swiotlb_tbl_unmap_single(struct dev
void swiotlb_sync_single_for_device(struct device *dev, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir)
{
- /*
- * Unconditional bounce is necessary to avoid corruption on
- * sync_*_for_cpu or dma_ummap_* when the device didn't overwrite
- * the whole lengt of the bounce buffer.
- */
- swiotlb_bounce(dev, tlb_addr, size, DMA_TO_DEVICE);
- BUG_ON(!valid_dma_direction(dir));
+ if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
+ swiotlb_bounce(dev, tlb_addr, size, DMA_TO_DEVICE);
+ else
+ BUG_ON(dir != DMA_FROM_DEVICE);
}
void swiotlb_sync_single_for_cpu(struct device *dev, phys_addr_t tlb_addr,
From: Andreas Gruenbacher <[email protected]>
commit 0c8eb2884a42d992c7726539328b7d3568f22143 upstream.
When switching from __get_user to fault_in_pages_readable, commit
9f9eae5ce717 broke kvm_use_magic_page: like __get_user,
fault_in_pages_readable returns 0 on success.
Fixes: 9f9eae5ce717 ("powerpc/kvm: Prefer fault_in_pages_readable function")
Cc: [email protected] # v4.18+
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Anand Jain <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/kvm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -669,7 +669,7 @@ static void __init kvm_use_magic_page(vo
on_each_cpu(kvm_map_magic_page, &features, 1);
/* Quick self-test to see if the mapping works */
- if (!fault_in_pages_readable((const char *)KVM_MAGIC_PAGE, sizeof(u32))) {
+ if (fault_in_pages_readable((const char *)KVM_MAGIC_PAGE, sizeof(u32))) {
kvm_patching_worked = false;
return;
}
From: Nicolas Dufresne <[email protected]>
[ Upstream commit 0f6146d476fc99862899e70f2554ee77b444b7b9 ]
In the final H264 API, it is not required to set scaling matrix if
they are not present in the bitstream. A flag was added in order to let
the driver know. The downside is that it leaves the default control
value to 0, which isn't valid. As per the spec (see formulas 7-8/7-9),
when the scaling matrix are absent from the bitstream, flat values
of 16 should be used. This improves this control semantic in a way
that the control value are always valid. Drivers can then use
the scaling_matrix control values without having to check its presence.
Same method was employed for MPEG2_QUANTISATION.
This fixes issues with MTK VCODEC H264 decoder when using GStreamer.
GStreamer does not set this control if its not present in the bitstream.
As MTK VDCODEC was using the initialized to 0 values, the frames ended
up completely gray.
Fixes: 54889c51b833d236 ("media: uapi: h264: Rename and clarify PPS_FLAG_SCALING_MATRIX_PRESENT")
Signed-off-by: Nicolas Dufresne <[email protected]>
Tested-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/v4l2-core/v4l2-ctrls-core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
index c4b5082849b6..45a76f40deeb 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
@@ -113,6 +113,7 @@ static void std_init_compound(const struct v4l2_ctrl *ctrl, u32 idx,
struct v4l2_ctrl_mpeg2_quantisation *p_mpeg2_quant;
struct v4l2_ctrl_vp8_frame *p_vp8_frame;
struct v4l2_ctrl_fwht_params *p_fwht_params;
+ struct v4l2_ctrl_h264_scaling_matrix *p_h264_scaling_matrix;
void *p = ptr.p + idx * ctrl->elem_size;
if (ctrl->p_def.p_const)
@@ -160,6 +161,15 @@ static void std_init_compound(const struct v4l2_ctrl *ctrl, u32 idx,
p_fwht_params->flags = V4L2_FWHT_FL_PIXENC_YUV |
(2 << V4L2_FWHT_FL_COMPONENTS_NUM_OFFSET);
break;
+ case V4L2_CTRL_TYPE_H264_SCALING_MATRIX:
+ p_h264_scaling_matrix = p;
+ /*
+ * The default (flat) H.264 scaling matrix when none are
+ * specified in the bitstream, this is according to formulas
+ * (7-8) and (7-9) of the specification.
+ */
+ memset(p_h264_scaling_matrix, 16, sizeof(*p_h264_scaling_matrix));
+ break;
}
}
--
2.34.1
From: Krzysztof Kozlowski <[email protected]>
commit 453a24ded415f7fce0499c6b0a2c7b28f84911f2 upstream.
Add required VDD supplies to HDMI block on SMDK5420. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale Octa and Odroid XU3 boards (voltage matches).
Cc: <[email protected]> # v3.15+
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
+ vdd-supply = <&ldo6_reg>;
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
};
&hsi2c_4 {
From: Richard Guy Briggs <[email protected]>
[ Upstream commit 272ceeaea355214b301530e262a0df8600bfca95 ]
AUDIT_TIME_* events are generated when there are syscall rules present
that are not related to time keeping. This will produce noisy log
entries that could flood the logs and hide events we really care about.
Rather than immediately produce the AUDIT_TIME_* records, store the data
in the context and log it at syscall exit time respecting the filter
rules.
Note: This eats the audit_buffer, unlike any others in show_special().
Please see https://bugzilla.redhat.com/show_bug.cgi?id=1991919
Fixes: 7e8eda734d30 ("ntp: Audit NTP parameters adjustment")
Fixes: 2d87a0674bd6 ("timekeeping: Audit clock adjustments")
Signed-off-by: Richard Guy Briggs <[email protected]>
[PM: fixed style/whitespace issues]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/audit.h | 4 +++
kernel/auditsc.c | 87 +++++++++++++++++++++++++++++++++++++-----------
2 files changed, 71 insertions(+), 20 deletions(-)
diff --git a/kernel/audit.h b/kernel/audit.h
index d6a2c899a8db..b2ef4c0d3ec0 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -194,6 +194,10 @@ struct audit_context {
struct {
char *name;
} module;
+ struct {
+ struct audit_ntp_data ntp_data;
+ struct timespec64 tk_injoffset;
+ } time;
};
int fds[2];
struct audit_proctitle proctitle;
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index b1cb1dbf7417..2f036bab3c28 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1219,6 +1219,53 @@ static void audit_log_fcaps(struct audit_buffer *ab, struct audit_names *name)
from_kuid(&init_user_ns, name->fcap.rootid));
}
+static void audit_log_time(struct audit_context *context, struct audit_buffer **ab)
+{
+ const struct audit_ntp_data *ntp = &context->time.ntp_data;
+ const struct timespec64 *tk = &context->time.tk_injoffset;
+ static const char * const ntp_name[] = {
+ "offset",
+ "freq",
+ "status",
+ "tai",
+ "tick",
+ "adjust",
+ };
+ int type;
+
+ if (context->type == AUDIT_TIME_ADJNTPVAL) {
+ for (type = 0; type < AUDIT_NTP_NVALS; type++) {
+ if (ntp->vals[type].newval != ntp->vals[type].oldval) {
+ if (!*ab) {
+ *ab = audit_log_start(context,
+ GFP_KERNEL,
+ AUDIT_TIME_ADJNTPVAL);
+ if (!*ab)
+ return;
+ }
+ audit_log_format(*ab, "op=%s old=%lli new=%lli",
+ ntp_name[type],
+ ntp->vals[type].oldval,
+ ntp->vals[type].newval);
+ audit_log_end(*ab);
+ *ab = NULL;
+ }
+ }
+ }
+ if (tk->tv_sec != 0 || tk->tv_nsec != 0) {
+ if (!*ab) {
+ *ab = audit_log_start(context, GFP_KERNEL,
+ AUDIT_TIME_INJOFFSET);
+ if (!*ab)
+ return;
+ }
+ audit_log_format(*ab, "sec=%lli nsec=%li",
+ (long long)tk->tv_sec, tk->tv_nsec);
+ audit_log_end(*ab);
+ *ab = NULL;
+ }
+}
+
static void show_special(struct audit_context *context, int *call_panic)
{
struct audit_buffer *ab;
@@ -1327,6 +1374,11 @@ static void show_special(struct audit_context *context, int *call_panic)
audit_log_format(ab, "(null)");
break;
+ case AUDIT_TIME_ADJNTPVAL:
+ case AUDIT_TIME_INJOFFSET:
+ /* this call deviates from the rest, eating the buffer */
+ audit_log_time(context, &ab);
+ break;
}
audit_log_end(ab);
}
@@ -2564,31 +2616,26 @@ void __audit_fanotify(unsigned int response)
void __audit_tk_injoffset(struct timespec64 offset)
{
- audit_log(audit_context(), GFP_KERNEL, AUDIT_TIME_INJOFFSET,
- "sec=%lli nsec=%li",
- (long long)offset.tv_sec, offset.tv_nsec);
-}
-
-static void audit_log_ntp_val(const struct audit_ntp_data *ad,
- const char *op, enum audit_ntp_type type)
-{
- const struct audit_ntp_val *val = &ad->vals[type];
-
- if (val->newval == val->oldval)
- return;
+ struct audit_context *context = audit_context();
- audit_log(audit_context(), GFP_KERNEL, AUDIT_TIME_ADJNTPVAL,
- "op=%s old=%lli new=%lli", op, val->oldval, val->newval);
+ /* only set type if not already set by NTP */
+ if (!context->type)
+ context->type = AUDIT_TIME_INJOFFSET;
+ memcpy(&context->time.tk_injoffset, &offset, sizeof(offset));
}
void __audit_ntp_log(const struct audit_ntp_data *ad)
{
- audit_log_ntp_val(ad, "offset", AUDIT_NTP_OFFSET);
- audit_log_ntp_val(ad, "freq", AUDIT_NTP_FREQ);
- audit_log_ntp_val(ad, "status", AUDIT_NTP_STATUS);
- audit_log_ntp_val(ad, "tai", AUDIT_NTP_TAI);
- audit_log_ntp_val(ad, "tick", AUDIT_NTP_TICK);
- audit_log_ntp_val(ad, "adjust", AUDIT_NTP_ADJUST);
+ struct audit_context *context = audit_context();
+ int type;
+
+ for (type = 0; type < AUDIT_NTP_NVALS; type++)
+ if (ad->vals[type].newval != ad->vals[type].oldval) {
+ /* unconditionally set type, overwriting TK */
+ context->type = AUDIT_TIME_ADJNTPVAL;
+ memcpy(&context->time.ntp_data, ad, sizeof(*ad));
+ break;
+ }
}
void __audit_log_nfcfg(const char *name, u8 af, unsigned int nentries,
--
2.34.1
From: Robin Murphy <[email protected]>
commit 5b61343b50590fb04a3f6be2cdc4868091757262 upstream.
For various reasons based on the allocator behaviour and typical
use-cases at the time, when the max32_alloc_size optimisation was
introduced it seemed reasonable to couple the reset of the tracked
size to the update of cached32_node upon freeing a relevant IOVA.
However, since subsequent optimisations focused on helping genuine
32-bit devices make best use of even more limited address spaces, it
is now a lot more likely for cached32_node to be anywhere in a "full"
32-bit address space, and as such more likely for space to become
available from IOVAs below that node being freed.
At this point, the short-cut in __cached_rbnode_delete_update() really
doesn't hold up any more, and we need to fix the logic to reliably
provide the expected behaviour. We still want cached32_node to only move
upwards, but we should reset the allocation size if *any* 32-bit space
has become available.
Reported-by: Yunfei Wang <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Miles Chen <[email protected]>
Link: https://lore.kernel.org/r/033815732d83ca73b13c11485ac39336f15c3b40.1646318408.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <[email protected]>
Cc: Miles Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/iova.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -154,10 +154,11 @@ __cached_rbnode_delete_update(struct iov
cached_iova = to_iova(iovad->cached32_node);
if (free == cached_iova ||
(free->pfn_hi < iovad->dma_32bit_pfn &&
- free->pfn_lo >= cached_iova->pfn_lo)) {
+ free->pfn_lo >= cached_iova->pfn_lo))
iovad->cached32_node = rb_next(&free->node);
+
+ if (free->pfn_lo < iovad->dma_32bit_pfn)
iovad->max32_alloc_size = iovad->dma_32bit_pfn;
- }
cached_iova = to_iova(iovad->cached_node);
if (free->pfn_lo >= cached_iova->pfn_lo)
From: Nishanth Menon <[email protected]>
commit a06ed27f3bc63ab9e10007dc0118d910908eb045 upstream.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A72 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
[1] https://developer.arm.com/documentation/100095/0002/system-control/aarch64-register-descriptions/configuration-base-address-register--el1
[2] https://lore.kernel.org/all/[email protected]/
[3] https://developer.arm.com/documentation/100095/0002/way1382452674438
Cc: [email protected] # 5.10+
Fixes: 2d87061e70de ("arm64: dts: ti: Add Support for J721E SoC")
Reported-by: Marc Zyngier <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 5 ++++-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -76,7 +76,10 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01900000 0x00 0x100000>; /* GICR */
+ <0x00 0x01900000 0x00 0x100000>, /* GICR */
+ <0x00 0x6f000000 0x00 0x2000>, /* GICC */
+ <0x00 0x6f010000 0x00 0x1000>, /* GICH */
+ <0x00 0x6f020000 0x00 0x2000>; /* GICV */
/* vcpumntirq: virtual CPU interface maintenance interrupt */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -136,6 +136,7 @@
<0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
<0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
<0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
<0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
<0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
<0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
From: Mathieu Desnoyers <[email protected]>
[ Upstream commit bfdf4e6208051ed7165b2e92035b4bf11f43eb63 ]
The rseq rseq_cs.ptr.{ptr32,padding} uapi endianness handling is
entirely wrong on 32-bit little endian: a preprocessor logic mistake
wrongly uses the big endian field layout on 32-bit little endian
architectures.
Fortunately, those ptr32 accessors were never used within the kernel,
and only meant as a convenience for user-space.
Remove those and replace the whole rseq_cs union by a __u64 type, as
this is the only thing really needed to express the ABI. Document how
32-bit architectures are meant to interact with this field.
Fixes: ec9c82e03a74 ("rseq: uapi: Declare rseq_cs field as union, update includes")
Signed-off-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/rseq.h | 20 ++++----------------
kernel/rseq.c | 8 ++++----
2 files changed, 8 insertions(+), 20 deletions(-)
diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h
index 9a402fdb60e9..77ee207623a9 100644
--- a/include/uapi/linux/rseq.h
+++ b/include/uapi/linux/rseq.h
@@ -105,23 +105,11 @@ struct rseq {
* Read and set by the kernel. Set by user-space with single-copy
* atomicity semantics. This field should only be updated by the
* thread which registered this data structure. Aligned on 64-bit.
+ *
+ * 32-bit architectures should update the low order bits of the
+ * rseq_cs field, leaving the high order bits initialized to 0.
*/
- union {
- __u64 ptr64;
-#ifdef __LP64__
- __u64 ptr;
-#else
- struct {
-#if (defined(__BYTE_ORDER) && (__BYTE_ORDER == __BIG_ENDIAN)) || defined(__BIG_ENDIAN)
- __u32 padding; /* Initialized to zero. */
- __u32 ptr32;
-#else /* LITTLE */
- __u32 ptr32;
- __u32 padding; /* Initialized to zero. */
-#endif /* ENDIAN */
- } ptr;
-#endif
- } rseq_cs;
+ __u64 rseq_cs;
/*
* Restartable sequences flags field.
diff --git a/kernel/rseq.c b/kernel/rseq.c
index 6d45ac3dae7f..97ac20b4f738 100644
--- a/kernel/rseq.c
+++ b/kernel/rseq.c
@@ -128,10 +128,10 @@ static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs)
int ret;
#ifdef CONFIG_64BIT
- if (get_user(ptr, &t->rseq->rseq_cs.ptr64))
+ if (get_user(ptr, &t->rseq->rseq_cs))
return -EFAULT;
#else
- if (copy_from_user(&ptr, &t->rseq->rseq_cs.ptr64, sizeof(ptr)))
+ if (copy_from_user(&ptr, &t->rseq->rseq_cs, sizeof(ptr)))
return -EFAULT;
#endif
if (!ptr) {
@@ -217,9 +217,9 @@ static int clear_rseq_cs(struct task_struct *t)
* Set rseq_cs to NULL.
*/
#ifdef CONFIG_64BIT
- return put_user(0UL, &t->rseq->rseq_cs.ptr64);
+ return put_user(0UL, &t->rseq->rseq_cs);
#else
- if (clear_user(&t->rseq->rseq_cs.ptr64, sizeof(t->rseq->rseq_cs.ptr64)))
+ if (clear_user(&t->rseq->rseq_cs, sizeof(t->rseq->rseq_cs)))
return -EFAULT;
return 0;
#endif
--
2.34.1
From: Hector Martin <[email protected]>
commit 6d766d8cb505ec1fae63da8faef4fc5712c3d794 upstream.
Move one of the declarations from sdio.c to pcie.c, since it makes no
sense in the former (SDIO support is optional), and add missing ones.
Fixes: 75729e110e68 ("brcmfmac: expose firmware config files through modinfo")
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Cc: [email protected]
Signed-off-by: Hector Martin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 7 +++++++
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 -
2 files changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -59,6 +59,13 @@ BRCMF_FW_DEF(4366B, "brcmfmac4366b-pcie"
BRCMF_FW_DEF(4366C, "brcmfmac4366c-pcie");
BRCMF_FW_DEF(4371, "brcmfmac4371-pcie");
+/* firmware config files */
+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcmfmac*-pcie.txt");
+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcmfmac*-pcie.*.txt");
+
+/* per-board firmware binaries */
+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcmfmac*-pcie.*.bin");
+
static const struct brcmf_firmware_mapping brcmf_pcie_fwnames[] = {
BRCMF_FW_ENTRY(BRCM_CC_43602_CHIP_ID, 0xFFFFFFFF, 43602),
BRCMF_FW_ENTRY(BRCM_CC_43465_CHIP_ID, 0xFFFFFFF0, 4366C),
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -629,7 +629,6 @@ BRCMF_FW_CLM_DEF(43752, "brcmfmac43752-s
/* firmware config files */
MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcmfmac*-sdio.*.txt");
-MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcmfmac*-pcie.*.txt");
/* per-board firmware binaries */
MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcmfmac*-sdio.*.bin");
From: Tejun Heo <[email protected]>
commit 6b2b04590b51aa4cf395fcd185ce439cab5961dc upstream.
blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't
disable merges across different cgroups. This obviously can lead to
accounting and control errors but more importantly to priority inversions -
e.g. an IO which belongs to a higher priority cgroup or IO class may end up
getting throttled incorrectly because it gets merged to an IO issued from a
low priority cgroup.
Fix it by adding blk_cgroup_mergeable() which is called from merge paths and
rejects cross-cgroup and cross-issue_as_root merges.
Signed-off-by: Tejun Heo <[email protected]>
Fixes: d70675121546 ("block: introduce blk-iolatency io controller")
Cc: [email protected] # v4.19+
Cc: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/r/Yi/eE/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-merge.c | 11 +++++++++++
include/linux/blk-cgroup.h | 17 +++++++++++++++++
2 files changed, 28 insertions(+)
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -7,6 +7,7 @@
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/scatterlist.h>
+#include <linux/blk-cgroup.h>
#include <trace/events/block.h>
@@ -561,6 +562,9 @@ static inline unsigned int blk_rq_get_ma
static inline int ll_new_hw_segment(struct request *req, struct bio *bio,
unsigned int nr_phys_segs)
{
+ if (!blk_cgroup_mergeable(req, bio))
+ goto no_merge;
+
if (blk_integrity_merge_bio(req->q, req, bio) == false)
goto no_merge;
@@ -657,6 +661,9 @@ static int ll_merge_requests_fn(struct r
if (total_phys_segments > blk_rq_get_max_segments(req))
return 0;
+ if (!blk_cgroup_mergeable(req, next->bio))
+ return 0;
+
if (blk_integrity_merge_rq(q, req, next) == false)
return 0;
@@ -863,6 +870,10 @@ bool blk_rq_merge_ok(struct request *rq,
if (rq->rq_disk != bio->bi_bdev->bd_disk)
return false;
+ /* don't merge across cgroup boundaries */
+ if (!blk_cgroup_mergeable(rq, bio))
+ return false;
+
/* only merge integrity protected bio into ditto rq */
if (blk_integrity_merge_bio(rq->q, rq, bio) == false)
return false;
--- a/include/linux/blk-cgroup.h
+++ b/include/linux/blk-cgroup.h
@@ -24,6 +24,7 @@
#include <linux/atomic.h>
#include <linux/kthread.h>
#include <linux/fs.h>
+#include <linux/blk-mq.h>
/* percpu_counter batch for blkg_[rw]stats, per-cpu drift doesn't matter */
#define BLKG_STAT_CPU_BATCH (INT_MAX / 2)
@@ -604,6 +605,21 @@ static inline void blkcg_clear_delay(str
atomic_dec(&blkg->blkcg->css.cgroup->congestion_count);
}
+/**
+ * blk_cgroup_mergeable - Determine whether to allow or disallow merges
+ * @rq: request to merge into
+ * @bio: bio to merge
+ *
+ * @bio and @rq should belong to the same cgroup and their issue_as_root should
+ * match. The latter is necessary as we don't want to throttle e.g. a metadata
+ * update because it happens to be next to a regular IO.
+ */
+static inline bool blk_cgroup_mergeable(struct request *rq, struct bio *bio)
+{
+ return rq->bio->bi_blkg == bio->bi_blkg &&
+ bio_issue_as_root_blkg(rq->bio) == bio_issue_as_root_blkg(bio);
+}
+
void blk_cgroup_bio_start(struct bio *bio);
void blkcg_add_delay(struct blkcg_gq *blkg, u64 now, u64 delta);
void blkcg_schedule_throttle(struct request_queue *q, bool use_memdelay);
@@ -659,6 +675,7 @@ static inline void blkg_put(struct blkcg
static inline bool blkcg_punt_bio_submit(struct bio *bio) { return false; }
static inline void blkcg_bio_issue_init(struct bio *bio) { }
static inline void blk_cgroup_bio_start(struct bio *bio) { }
+static inline bool blk_cgroup_mergeable(struct request *rq, struct bio *bio) { return true; }
#define blk_queue_for_each_rl(rl, q) \
for ((rl) = &(q)->root_rl; (rl); (rl) = NULL)
From: Ojaswin Mujoo <[email protected]>
commit 077d0c2c78df6f7260cdd015a991327efa44d8ad upstream.
Currently mb_optimize_scan scan feature which improves filesystem
performance heavily (when FS is fragmented), seems to be not working
with files with extents (ext4 by default has files with extents).
This patch fixes that and makes mb_optimize_scan feature work
for files with extents.
Below are some performance numbers obtained when allocating a 10M and 100M
file with and w/o this patch on a filesytem with no 1M contiguous block.
<perf numbers>
===============
Workload: dd if=/dev/urandom of=test conv=fsync bs=1M count=10/100
Time taken
=====================================================
no. Size without-patch with-patch Diff(%)
1 10M 0m8.401s 0m5.623s 33.06%
2 100M 1m40.465s 1m14.737s 25.6%
<debug stats>
=============
w/o patch:
mballoc:
reqs: 17056
success: 11407
groups_scanned: 13643
cr0_stats:
hits: 37
groups_considered: 9472
useless_loops: 36
bad_suggestions: 0
cr1_stats:
hits: 11418
groups_considered: 908560
useless_loops: 1894
bad_suggestions: 0
cr2_stats:
hits: 1873
groups_considered: 6913
useless_loops: 21
cr3_stats:
hits: 21
groups_considered: 5040
useless_loops: 21
extents_scanned: 417364
goal_hits: 3707
2^n_hits: 37
breaks: 1873
lost: 0
buddies_generated: 239/240
buddies_time_used: 651080
preallocated: 705
discarded: 478
with patch:
mballoc:
reqs: 12768
success: 11305
groups_scanned: 12768
cr0_stats:
hits: 1
groups_considered: 18
useless_loops: 0
bad_suggestions: 0
cr1_stats:
hits: 5829
groups_considered: 50626
useless_loops: 0
bad_suggestions: 0
cr2_stats:
hits: 6938
groups_considered: 580363
useless_loops: 0
cr3_stats:
hits: 0
groups_considered: 0
useless_loops: 0
extents_scanned: 309059
goal_hits: 0
2^n_hits: 1
breaks: 1463
lost: 0
buddies_generated: 239/240
buddies_time_used: 791392
preallocated: 673
discarded: 446
Fixes: 196e402 (ext4: improve cr 0 / cr 1 group scanning)
Cc: [email protected]
Reported-by: Geetika Moolchandani <[email protected]>
Reported-by: Nageswara R Sastry <[email protected]>
Suggested-by: Ritesh Harjani <[email protected]>
Signed-off-by: Ojaswin Mujoo <[email protected]>
Link: https://lore.kernel.org/r/fc9a48f7f8dcfc83891a8b21f6dd8cdf056ed810.1646732698.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/mballoc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1000,7 +1000,7 @@ static inline int should_optimize_scan(s
return 0;
if (ac->ac_criteria >= 2)
return 0;
- if (ext4_test_inode_flag(ac->ac_inode, EXT4_INODE_EXTENTS))
+ if (!ext4_test_inode_flag(ac->ac_inode, EXT4_INODE_EXTENTS))
return 0;
return 1;
}
From: Johan Hovold <[email protected]>
commit 4a321de239213300a714fa0353a5f1272d381a44 upstream.
Make sure to balance the runtime PM usage counter on driver unbind.
Fixes: 407ccc65bfd2 ("[media] davinci: vpif: add pm_runtime support")
Cc: [email protected] # 3.9
Cc: Lad, Prabhakar <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/davinci/vpif.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/media/platform/davinci/vpif.c
+++ b/drivers/media/platform/davinci/vpif.c
@@ -496,6 +496,7 @@ static int vpif_probe(struct platform_de
static int vpif_remove(struct platform_device *pdev)
{
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
From: Patrick Rudolph <[email protected]>
[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ]
On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.
Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.
Signed-off-by: Patrick Rudolph <[email protected]>
Signed-off-by: Marcello Sylvester Bauer <[email protected]>
Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io
Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support")
Cc: Alan Tull <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pmbus/pmbus_core.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index ac2fbee1ba9c..b1386a4df4cc 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2391,10 +2391,14 @@ static int pmbus_regulator_is_enabled(struct regulator_dev *rdev)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
u8 page = rdev_get_id(rdev);
int ret;
+ mutex_lock(&data->update_lock);
ret = pmbus_read_byte_data(client, page, PMBUS_OPERATION);
+ mutex_unlock(&data->update_lock);
+
if (ret < 0)
return ret;
@@ -2405,11 +2409,17 @@ static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
u8 page = rdev_get_id(rdev);
+ int ret;
- return pmbus_update_byte_data(client, page, PMBUS_OPERATION,
- PB_OPERATION_CONTROL_ON,
- enable ? PB_OPERATION_CONTROL_ON : 0);
+ mutex_lock(&data->update_lock);
+ ret = pmbus_update_byte_data(client, page, PMBUS_OPERATION,
+ PB_OPERATION_CONTROL_ON,
+ enable ? PB_OPERATION_CONTROL_ON : 0);
+ mutex_unlock(&data->update_lock);
+
+ return ret;
}
static int pmbus_regulator_enable(struct regulator_dev *rdev)
--
2.34.1
From: Baokun Li <[email protected]>
commit d051cef784de4d54835f6b6836d98a8f6935772c upstream.
If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error,
we can observe the following kmemleak report:
--------------------------------------------
unreferenced object 0xffff88811b25a640 (size 64):
comm "mount", pid 691, jiffies 4294957728 (age 71.952s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffa5423a06>] jffs2_sum_init+0x86/0x130
[<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0
[<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30
[<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0
[...]
unreferenced object 0xffff88812c760000 (size 65536):
comm "mount", pid 691, jiffies 4294957728 (age 71.952s)
hex dump (first 32 bytes):
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
backtrace:
[<ffffffffa493a449>] __kmalloc+0x6b9/0x910
[<ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130
[<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0
[<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30
[<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0
[...]
--------------------------------------------
This is because the resources allocated in jffs2_sum_init() are not
released. Call jffs2_sum_exit() to release these resources to solve
the problem.
Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Cc: [email protected]
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jffs2/build.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -415,13 +415,15 @@ int jffs2_do_mount_fs(struct jffs2_sb_in
jffs2_free_ino_caches(c);
jffs2_free_raw_node_refs(c);
ret = -EIO;
- goto out_free;
+ goto out_sum_exit;
}
jffs2_calc_trigger_levels(c);
return 0;
+ out_sum_exit:
+ jffs2_sum_exit(c);
out_free:
kvfree(c->blocks);
From: Jonathan Marek <[email protected]>
[ Upstream commit 14d510e040f85ff05734fd6db8bae44b47886464 ]
Use the decode_format/data_type from the "format" struct instead of a
hardcoded 10-bit format.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Tested-by: Julian Grahsl <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index ac22ff29d2a9..aa65043c3303 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -366,7 +366,7 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val |= input_format->width & 0x1fff << TPG_DT_n_CFG_0_FRAME_WIDTH;
writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_0(0));
- val = DATA_TYPE_RAW_10BIT << TPG_DT_n_CFG_1_DATA_TYPE;
+ val = format->data_type << TPG_DT_n_CFG_1_DATA_TYPE;
writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_1(0));
val = tg->mode << TPG_DT_n_CFG_2_PAYLOAD_MODE;
@@ -382,8 +382,9 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val = 1 << RDI_CFG0_BYTE_CNTR_EN;
val |= 1 << RDI_CFG0_FORMAT_MEASURE_EN;
val |= 1 << RDI_CFG0_TIMESTAMP_EN;
+ /* note: for non-RDI path, this should be format->decode_format */
val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
- val |= DATA_TYPE_RAW_10BIT << RDI_CFG0_DATA_TYPE;
+ val |= format->data_type << RDI_CFG0_DATA_TYPE;
val |= vc << RDI_CFG0_VIRTUAL_CHANNEL;
val |= dt_id << RDI_CFG0_DT_ID;
writel_relaxed(val, csid->base + CSID_RDI_CFG0(0));
--
2.34.1
From: Si-Wei Liu <[email protected]>
[ Upstream commit 30c22f3816ffef8aa21a000e93c4ee1402a6ea65 ]
Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit requirements:
"VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
There's assumption in the mlx5_vdpa multiqueue code that MQ must come
together with CTRL_VQ. However, there's nowhere in the upper layer to
guarantee this assumption would hold. Were there an untrusted driver
sending down MQ without CTRL_VQ, it would compromise various spots for
e.g. is_index_valid() and is_ctrl_vq_idx(). Although this doesn't end
up with immediate panic or security loophole as of today's code, the
chance for this to be taken advantage of due to future code change is
not zero.
Harden the crispy assumption by failing the set_driver_features() call
when seeing (MQ && !CTRL_VQ). For that end, verify_min_features() is
renamed to verify_driver_features() to reflect the fact that it now does
more than just validate the minimum features. verify_driver_features()
is now used to accommodate various checks against the driver features
for set_driver_features().
Signed-off-by: Si-Wei Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Eli Cohen <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 902aad29456f..f77a611f592f 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1873,11 +1873,25 @@ static u64 mlx5_vdpa_get_features(struct vdpa_device *vdev)
return ndev->mvdev.mlx_features;
}
-static int verify_min_features(struct mlx5_vdpa_dev *mvdev, u64 features)
+static int verify_driver_features(struct mlx5_vdpa_dev *mvdev, u64 features)
{
+ /* Minimum features to expect */
if (!(features & BIT_ULL(VIRTIO_F_ACCESS_PLATFORM)))
return -EOPNOTSUPP;
+ /* Double check features combination sent down by the driver.
+ * Fail invalid features due to absence of the depended feature.
+ *
+ * Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit
+ * requirements: "VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
+ * By failing the invalid features sent down by untrusted drivers,
+ * we're assured the assumption made upon is_index_valid() and
+ * is_ctrl_vq_idx() will not be compromised.
+ */
+ if ((features & (BIT_ULL(VIRTIO_NET_F_MQ) | BIT_ULL(VIRTIO_NET_F_CTRL_VQ))) ==
+ BIT_ULL(VIRTIO_NET_F_MQ))
+ return -EINVAL;
+
return 0;
}
@@ -1953,7 +1967,7 @@ static int mlx5_vdpa_set_features(struct vdpa_device *vdev, u64 features)
print_features(mvdev, features, true);
- err = verify_min_features(mvdev, features);
+ err = verify_driver_features(mvdev, features);
if (err)
return err;
--
2.34.1
From: Hugh Dickins <[email protected]>
commit 4e0906008cdb56381638aa17d9c32734eae6d37a upstream.
v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") introduced
vma_merge() to mbind_range(); but unlike madvise, mlock and mprotect, it
put a "continue" to next vma where its precedents go to update flags on
current vma before advancing: that left vma with the wrong setting in the
infamous vma_merge() case 8.
v3.10 commit 1444f92c8498 ("mm: merging memory blocks resets mempolicy")
tried to fix that in vma_adjust(), without fully understanding the issue.
v3.11 commit 3964acd0dbec ("mm: mempolicy: fix mbind_range() &&
vma_adjust() interaction") reverted that, and went about the fix in the
right way, but chose to optimize out an unnecessary mpol_dup() with a
prior mpol_equal() test. But on tmpfs, that also pessimized out the vital
call to its ->set_policy(), leaving the new mbind unenforced.
The user visible effect was that the pages got allocated on the local
node (happened to be 0), after the mbind() caller had specifically
asked for them to be allocated on node 1. There was not any page
migration involved in the case reported: the pages simply got allocated
on the wrong node.
Just delete that optimization now (though it could be made conditional on
vma not having a set_policy). Also remove the "next" variable: it turned
out to be blameless, but also pointless.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 3964acd0dbec ("mm: mempolicy: fix mbind_range() && vma_adjust() interaction")
Signed-off-by: Hugh Dickins <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mempolicy.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -783,7 +783,6 @@ static int vma_replace_policy(struct vm_
static int mbind_range(struct mm_struct *mm, unsigned long start,
unsigned long end, struct mempolicy *new_pol)
{
- struct vm_area_struct *next;
struct vm_area_struct *prev;
struct vm_area_struct *vma;
int err = 0;
@@ -798,8 +797,7 @@ static int mbind_range(struct mm_struct
if (start > vma->vm_start)
prev = vma;
- for (; vma && vma->vm_start < end; prev = vma, vma = next) {
- next = vma->vm_next;
+ for (; vma && vma->vm_start < end; prev = vma, vma = vma->vm_next) {
vmstart = max(start, vma->vm_start);
vmend = min(end, vma->vm_end);
@@ -813,10 +811,6 @@ static int mbind_range(struct mm_struct
new_pol, vma->vm_userfaultfd_ctx);
if (prev) {
vma = prev;
- next = vma->vm_next;
- if (mpol_equal(vma_policy(vma), new_pol))
- continue;
- /* vma_merge() joined vma && vma->next, case 8 */
goto replace;
}
if (vma->vm_start != vmstart) {
From: Valentin Schneider <[email protected]>
[ Upstream commit 49bef33e4b87b743495627a529029156c6e09530 ]
John reported that push_rt_task() can end up invoking
find_lowest_rq(rq->curr) when curr is not an RT task (in this case a CFS
one), which causes mayhem down convert_prio().
This can happen when current gets demoted to e.g. CFS when releasing an
rt_mutex, and the local CPU gets hit with an rto_push_work irqwork before
getting the chance to reschedule. Exactly who triggers this work isn't
entirely clear to me - switched_from_rt() only invokes rt_queue_pull_task()
if there are no RT tasks on the local RQ, which means the local CPU can't
be in the rto_mask.
My current suspected sequence is something along the lines of the below,
with the demoted task being current.
mark_wakeup_next_waiter()
rt_mutex_adjust_prio()
rt_mutex_setprio() // deboost originally-CFS task
check_class_changed()
switched_from_rt() // Only rt_queue_pull_task() if !rq->rt.rt_nr_running
switched_to_fair() // Sets need_resched
__balance_callbacks() // if pull_rt_task(), tell_cpu_to_push() can't select local CPU per the above
raw_spin_rq_unlock(rq)
// need_resched is set, so task_woken_rt() can't
// invoke push_rt_tasks(). Best I can come up with is
// local CPU has rt_nr_migratory >= 2 after the demotion, so stays
// in the rto_mask, and then:
<some other CPU running rto_push_irq_work_func() queues rto_push_work on this CPU>
push_rt_task()
// breakage follows here as rq->curr is CFS
Move an existing check to check rq->curr vs the next pushable task's
priority before getting anywhere near find_lowest_rq(). While at it, add an
explicit sched_class of rq->curr check prior to invoking
find_lowest_rq(rq->curr). Align the DL logic to also reschedule regardless
of next_task's migratability.
Fixes: a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing")
Reported-by: John Keeping <[email protected]>
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Tested-by: John Keeping <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/deadline.c | 12 ++++++------
kernel/sched/rt.c | 32 ++++++++++++++++++++++----------
2 files changed, 28 insertions(+), 16 deletions(-)
diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index e94314633b39..1f811b375bf0 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -2145,12 +2145,6 @@ static int push_dl_task(struct rq *rq)
return 0;
retry:
- if (is_migration_disabled(next_task))
- return 0;
-
- if (WARN_ON(next_task == rq->curr))
- return 0;
-
/*
* If next_task preempts rq->curr, and rq->curr
* can move away, it makes sense to just reschedule
@@ -2163,6 +2157,12 @@ static int push_dl_task(struct rq *rq)
return 0;
}
+ if (is_migration_disabled(next_task))
+ return 0;
+
+ if (WARN_ON(next_task == rq->curr))
+ return 0;
+
/* We might release rq lock */
get_task_struct(next_task);
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 54f9bb3f1560..2758cf5f7987 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -1900,6 +1900,16 @@ static int push_rt_task(struct rq *rq, bool pull)
return 0;
retry:
+ /*
+ * It's possible that the next_task slipped in of
+ * higher priority than current. If that's the case
+ * just reschedule current.
+ */
+ if (unlikely(next_task->prio < rq->curr->prio)) {
+ resched_curr(rq);
+ return 0;
+ }
+
if (is_migration_disabled(next_task)) {
struct task_struct *push_task = NULL;
int cpu;
@@ -1907,6 +1917,18 @@ static int push_rt_task(struct rq *rq, bool pull)
if (!pull || rq->push_busy)
return 0;
+ /*
+ * Invoking find_lowest_rq() on anything but an RT task doesn't
+ * make sense. Per the above priority check, curr has to
+ * be of higher priority than next_task, so no need to
+ * reschedule when bailing out.
+ *
+ * Note that the stoppers are masqueraded as SCHED_FIFO
+ * (cf. sched_set_stop_task()), so we can't rely on rt_task().
+ */
+ if (rq->curr->sched_class != &rt_sched_class)
+ return 0;
+
cpu = find_lowest_rq(rq->curr);
if (cpu == -1 || cpu == rq->cpu)
return 0;
@@ -1931,16 +1953,6 @@ static int push_rt_task(struct rq *rq, bool pull)
if (WARN_ON(next_task == rq->curr))
return 0;
- /*
- * It's possible that the next_task slipped in of
- * higher priority than current. If that's the case
- * just reschedule current.
- */
- if (unlikely(next_task->prio < rq->curr->prio)) {
- resched_curr(rq);
- return 0;
- }
-
/* We might release rq lock */
get_task_struct(next_task);
--
2.34.1
From: Max Filippov <[email protected]>
commit a3d0245c58f962ee99d4440ea0eaf45fb7f5a5cc upstream.
The commit cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr")
replaced 'WSR' macro in the function xtensa_wsr with 'xtensa_set_sr',
but variable 'v' in the xtensa_set_sr body shadowed the argument 'v'
passed to it, resulting in wrong value written to debug registers.
Fix that by removing intermediate variable from the xtensa_set_sr
macro body.
Cc: [email protected]
Fixes: cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr")
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/include/asm/processor.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -226,8 +226,8 @@ extern unsigned long get_wchan(struct ta
#define xtensa_set_sr(x, sr) \
({ \
- unsigned int v = (unsigned int)(x); \
- __asm__ __volatile__ ("wsr %0, "__stringify(sr) :: "a"(v)); \
+ __asm__ __volatile__ ("wsr %0, "__stringify(sr) :: \
+ "a"((unsigned int)(x))); \
})
#define xtensa_get_sr(sr) \
From: Charan Teja Kalla <[email protected]>
commit e6b0a7b357659c332231621e4315658d062c23ee upstream.
This reverts commit 08095d6310a7 ("mm: madvise: skip unmapped vma holes
passed to process_madvise") as process_madvise() fails to return the
exact processed bytes in other cases too.
As an example: if process_madvise() hits mlocked pages after processing
some initial bytes passed in [start, end), it just returns EINVAL
although some bytes are processed. Thus making an exception only for
ENOMEM is partially fixing the problem of returning the proper advised
bytes.
Thus revert this patch and return proper bytes advised.
Link: https://lkml.kernel.org/r/e73da1304a88b6a8a11907045117cccf4c2b8374.1648046642.git.quic_charante@quicinc.com
Fixes: 08095d6310a7ce ("mm: madvise: skip unmapped vma holes passed to process_madvise")
Signed-off-by: Charan Teja Kalla <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/madvise.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -1287,16 +1287,9 @@ SYSCALL_DEFINE5(process_madvise, int, pi
while (iov_iter_count(&iter)) {
iovec = iov_iter_iovec(&iter);
- /*
- * do_madvise returns ENOMEM if unmapped holes are present
- * in the passed VMA. process_madvise() is expected to skip
- * unmapped holes passed to it in the 'struct iovec' list
- * and not fail because of them. Thus treat -ENOMEM return
- * from do_madvise as valid and continue processing.
- */
ret = do_madvise(mm, (unsigned long)iovec.iov_base,
iovec.iov_len, behavior);
- if (ret < 0 && ret != -ENOMEM)
+ if (ret < 0)
break;
iov_iter_advance(&iter, iovec.iov_len);
}
From: Hans de Goede <[email protected]>
commit 94fa115f7b28a3f02611499175e134f0a823b686 upstream.
Some devices use e.g. a portrait panel in a standard laptop casing made
for landscape panels. efifb calls drm_get_panel_orientation_quirk() and
sets fb_info.fbcon_rotate_hint to make fbcon rotate the console so that
it shows up-right instead of on its side.
When switching to simpledrm the fbcon renders on its side. Call the
drm_connector_set_panel_orientation_with_quirk() helper to add
a "panel orientation" property on devices listed in the quirk table,
to make the fbcon (and aware userspace apps) rotate the image to
display properly.
Cc: Javier Martinez Canillas <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/tiny/simpledrm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -779,6 +779,9 @@ static int simpledrm_device_init_modeset
if (ret)
return ret;
drm_connector_helper_add(connector, &simpledrm_connector_helper_funcs);
+ drm_connector_set_panel_orientation_with_quirk(connector,
+ DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
+ mode->hdisplay, mode->vdisplay);
formats = simpledrm_device_formats(sdev, &nformats);
From: YueHaibing <[email protected]>
[ Upstream commit 567e44fb51b4f909ae58038a7301352eecea8426 ]
If PPC_BOOK3S, PPC_PMAC and PPC32 is n, COMPILE_TEST build fails:
drivers/video/fbdev/controlfb.c:70:0: error: "pgprot_cached_wthru" redefined [-Werror]
#define pgprot_cached_wthru(prot) (prot)
In file included from ./arch/powerpc/include/asm/pgtable.h:20:0,
from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:33,
from drivers/video/fbdev/controlfb.c:37:
./arch/powerpc/include/asm/nohash/pgtable.h:243:0: note: this is the location of the previous definition
#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/controlfb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 509311471d51..bd59e7b11ed5 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -67,7 +67,9 @@
#define out_8(addr, val) (void)(val)
#define in_le32(addr) 0
#define out_le32(addr, val) (void)(val)
+#ifndef pgprot_cached_wthru
#define pgprot_cached_wthru(prot) (prot)
+#endif
#else
static void invalid_vram_cache(void __force *addr)
{
--
2.34.1
From: Alex Deucher <[email protected]>
commit 901e2be20dc55079997ea1885ea77fc72e6826e7 upstream.
We need to set the APU flag from IP discovery before
we evaluate this code.
Acked-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 13 +++++++++++++
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 11 -----------
2 files changed, 13 insertions(+), 11 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/console.h>
#include <linux/slab.h>
+#include <linux/pci.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_probe_helper.h>
@@ -2069,6 +2070,8 @@ out:
*/
static int amdgpu_device_ip_early_init(struct amdgpu_device *adev)
{
+ struct drm_device *dev = adev_to_drm(adev);
+ struct pci_dev *parent;
int i, r;
amdgpu_device_enable_virtual_display(adev);
@@ -2168,6 +2171,16 @@ static int amdgpu_device_ip_early_init(s
return -EINVAL;
}
+ if (amdgpu_has_atpx() &&
+ (amdgpu_is_atpx_hybrid() ||
+ amdgpu_has_atpx_dgpu_power_cntl()) &&
+ ((adev->flags & AMD_IS_APU) == 0) &&
+ !pci_is_thunderbolt_attached(to_pci_dev(dev->dev)))
+ adev->flags |= AMD_IS_PX;
+
+ parent = pci_upstream_bridge(adev->pdev);
+ adev->has_pr3 = parent ? pci_pr3_present(parent) : false;
+
amdgpu_amdkfd_device_probe(adev);
adev->pm.pp_feature = amdgpu_pp_feature_mask;
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -152,21 +152,10 @@ static void amdgpu_get_audio_func(struct
int amdgpu_driver_load_kms(struct amdgpu_device *adev, unsigned long flags)
{
struct drm_device *dev;
- struct pci_dev *parent;
int r, acpi_status;
dev = adev_to_drm(adev);
- if (amdgpu_has_atpx() &&
- (amdgpu_is_atpx_hybrid() ||
- amdgpu_has_atpx_dgpu_power_cntl()) &&
- ((flags & AMD_IS_APU) == 0) &&
- !pci_is_thunderbolt_attached(to_pci_dev(dev->dev)))
- flags |= AMD_IS_PX;
-
- parent = pci_upstream_bridge(adev->pdev);
- adev->has_pr3 = parent ? pci_pr3_present(parent) : false;
-
/* amdgpu_device_init should report only fatal error
* like memory allocation failure or iomapping failure,
* or memory manager initialization failure, it must
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 13262fc26c1837c51a5131dbbdd67a2387f8bfc7 ]
As the potential failure of the dma_set_mask(),
it should be better to check it and return error
if fails.
Fixes: 126bdb606fd2 ("spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-zynqmp-gqspi.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 328b6559bb19..2b5afae8ff7f 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -1172,7 +1172,10 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_all;
}
- dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
+ ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
+ if (ret)
+ goto clk_dis_all;
+
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
ctlr->num_chipselect = GQSPI_DEFAULT_NUM_CS;
ctlr->mem_ops = &zynqmp_qspi_mem_ops;
--
2.34.1
From: Bharata B Rao <[email protected]>
[ Upstream commit 28c988c3ec29db74a1dda631b18785958d57df4f ]
The older format of /proc/pid/sched printed home node info which
required the mempolicy and task lock around mpol_get(). However
the format has changed since then and there is no need for
sched_show_numa() any more to have mempolicy argument,
asssociated mpol_get/put and task_lock/unlock. Remove them.
Fixes: 397f2378f1361 ("sched/numa: Fix numa balancing stats in /proc/pid/sched")
Signed-off-by: Bharata B Rao <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/debug.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 17a653b67006..7a2d32d2025f 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -921,25 +921,15 @@ void print_numa_stats(struct seq_file *m, int node, unsigned long tsf,
static void sched_show_numa(struct task_struct *p, struct seq_file *m)
{
#ifdef CONFIG_NUMA_BALANCING
- struct mempolicy *pol;
-
if (p->mm)
P(mm->numa_scan_seq);
- task_lock(p);
- pol = p->mempolicy;
- if (pol && !(pol->flags & MPOL_F_MORON))
- pol = NULL;
- mpol_get(pol);
- task_unlock(p);
-
P(numa_pages_migrated);
P(numa_preferred_nid);
P(total_numa_faults);
SEQ_printf(m, "current_node=%d, numa_group_id=%d\n",
task_node(p), task_numa_group_id(p));
show_numa_stats(p, m);
- mpol_put(pol);
#endif
}
--
2.34.1
From: Qais Yousef <[email protected]>
[ Upstream commit 77cf151b7bbdfa3577b3c3f3a5e267a6c60a263b ]
We can't use this tracepoint in modules without having the symbol
exported first, fix that.
Fixes: 765047932f15 ("sched/pelt: Add support to track thermal pressure")
Signed-off-by: Qais Yousef <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index a0747eaa2dba..c51bd3692316 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -36,6 +36,7 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_rt_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_dl_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_irq_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_se_tp);
+EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_thermal_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(sched_cpu_capacity_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(sched_overutilized_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(sched_util_est_cfs_tp);
--
2.34.1
From: Colin Ian King <[email protected]>
commit 02a95374b5eebdbd3b6413fd7ddec151d2ea75a1 upstream.
Currently tx_params is being re-assigned with a new value and the
previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten.
The assignment operator is incorrect, the original intent was to
bit-wise or the value in. Fix this by replacing the = operator
with |= instead.
Kudos to Christian Lamparter for suggesting the correct fix.
Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface")
Signed-off-by: Colin Ian King <[email protected]>
Cc: <[email protected]>
Acked-by: Christian Lamparter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/carl9170/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -1915,7 +1915,7 @@ static int carl9170_parse_eeprom(struct
WARN_ON(!(tx_streams >= 1 && tx_streams <=
IEEE80211_HT_MCS_TX_MAX_STREAMS));
- tx_params = (tx_streams - 1) <<
+ tx_params |= (tx_streams - 1) <<
IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
carl9170_band_2GHz.ht_cap.mcs.tx_params |= tx_params;
From: Jann Horn <[email protected]>
commit 84158b7f6a0624b81800b4e7c90f7fb7fdecf66c upstream.
When I rewrote the VMA dumping logic for coredumps, I changed it to
recognize ELF library mappings based on the file being executable instead
of the mapping having an ELF header. But turns out, distros ship many ELF
libraries as non-executable, so the heuristic goes wrong...
Restore the old behavior where FILTER(ELF_HEADERS) dumps the first page of
any offset-0 readable mapping that starts with the ELF magic.
This fix is technically layer-breaking a bit, because it checks for
something ELF-specific in fs/coredump.c; but since we probably want to
share this between standard ELF and FDPIC ELF anyway, I guess it's fine?
And this also keeps the change small for backporting.
Cc: [email protected]
Fixes: 429a22e776a2 ("coredump: rework elf/elf_fdpic vma_dump_size() into common helper")
Reported-by: Bill Messmer <[email protected]>
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/coredump.c | 39 ++++++++++++++++++++++++++++++++++-----
1 file changed, 34 insertions(+), 5 deletions(-)
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -41,6 +41,7 @@
#include <linux/fs.h>
#include <linux/path.h>
#include <linux/timekeeping.h>
+#include <linux/elf.h>
#include <linux/uaccess.h>
#include <asm/mmu_context.h>
@@ -992,6 +993,8 @@ static bool always_dump_vma(struct vm_ar
return false;
}
+#define DUMP_SIZE_MAYBE_ELFHDR_PLACEHOLDER 1
+
/*
* Decide how much of @vma's contents should be included in a core dump.
*/
@@ -1051,9 +1054,20 @@ static unsigned long vma_dump_size(struc
* dump the first page to aid in determining what was mapped here.
*/
if (FILTER(ELF_HEADERS) &&
- vma->vm_pgoff == 0 && (vma->vm_flags & VM_READ) &&
- (READ_ONCE(file_inode(vma->vm_file)->i_mode) & 0111) != 0)
- return PAGE_SIZE;
+ vma->vm_pgoff == 0 && (vma->vm_flags & VM_READ)) {
+ if ((READ_ONCE(file_inode(vma->vm_file)->i_mode) & 0111) != 0)
+ return PAGE_SIZE;
+
+ /*
+ * ELF libraries aren't always executable.
+ * We'll want to check whether the mapping starts with the ELF
+ * magic, but not now - we're holding the mmap lock,
+ * so copy_from_user() doesn't work here.
+ * Use a placeholder instead, and fix it up later in
+ * dump_vma_snapshot().
+ */
+ return DUMP_SIZE_MAYBE_ELFHDR_PLACEHOLDER;
+ }
#undef FILTER
@@ -1128,8 +1142,6 @@ int dump_vma_snapshot(struct coredump_pa
m->end = vma->vm_end;
m->flags = vma->vm_flags;
m->dump_size = vma_dump_size(vma, cprm->mm_flags);
-
- vma_data_size += m->dump_size;
}
mmap_write_unlock(mm);
@@ -1139,6 +1151,23 @@ int dump_vma_snapshot(struct coredump_pa
return -EFAULT;
}
+ for (i = 0; i < *vma_count; i++) {
+ struct core_vma_metadata *m = (*vma_meta) + i;
+
+ if (m->dump_size == DUMP_SIZE_MAYBE_ELFHDR_PLACEHOLDER) {
+ char elfmag[SELFMAG];
+
+ if (copy_from_user(elfmag, (void __user *)m->start, SELFMAG) ||
+ memcmp(elfmag, ELFMAG, SELFMAG) != 0) {
+ m->dump_size = 0;
+ } else {
+ m->dump_size = PAGE_SIZE;
+ }
+ }
+
+ vma_data_size += m->dump_size;
+ }
+
*vma_data_size_ptr = vma_data_size;
return 0;
}
From: Paulo Alcantara <[email protected]>
commit d6f5e358452479fa8a773b5c6ccc9e4ec5a20880 upstream.
When calling smb2_ioctl_query_info() with invalid
smb_query_info::flags, a NULL ptr dereference is triggered when trying
to kfree() uninitialised rqst[n].rq_iov array.
This also fixes leaked paths that are created in SMB2_open_init()
which required SMB2_open_free() to properly free them.
Here is a small C reproducer that triggers it
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define die(s) perror(s), exit(1)
#define QUERY_INFO 0xc018cf07
int main(int argc, char *argv[])
{
int fd;
if (argc < 2)
exit(1);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
die("open");
if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
die("ioctl");
close(fd);
return 0;
}
mount.cifs //srv/share /mnt -o ...
gcc repro.c && ./a.out /mnt/f0
[ 1832.124468] CIFS: VFS: \\w22-dc.zelda.test\test Invalid passthru query flags: 0x4
[ 1832.125043] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1832.125764] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 1832.126241] CPU: 3 PID: 1133 Comm: a.out Not tainted 5.17.0-rc8 #2
[ 1832.126630] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 1832.127322] RIP: 0010:smb2_ioctl_query_info+0x7a3/0xe30 [cifs]
[ 1832.127749] Code: 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 6c 05 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 74 24 28 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 cb 04 00 00 49 8b 3e e8 bb fc fa ff 48 89 da 48
[ 1832.128911] RSP: 0018:ffffc90000957b08 EFLAGS: 00010256
[ 1832.129243] RAX: dffffc0000000000 RBX: ffff888117e9b850 RCX: ffffffffa020580d
[ 1832.129691] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a2c0
[ 1832.130137] RBP: ffff888117e9b878 R08: 0000000000000001 R09: 0000000000000003
[ 1832.130585] R10: fffffbfff4087458 R11: 0000000000000001 R12: ffff888117e9b800
[ 1832.131037] R13: 00000000ffffffea R14: 0000000000000000 R15: ffff888117e9b8a8
[ 1832.131485] FS: 00007fcee9900740(0000) GS:ffff888151a00000(0000) knlGS:0000000000000000
[ 1832.131993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1832.132354] CR2: 00007fcee9a1ef5e CR3: 0000000114cd2000 CR4: 0000000000350ee0
[ 1832.132801] Call Trace:
[ 1832.132962] <TASK>
[ 1832.133104] ? smb2_query_reparse_tag+0x890/0x890 [cifs]
[ 1832.133489] ? cifs_mapchar+0x460/0x460 [cifs]
[ 1832.133822] ? rcu_read_lock_sched_held+0x3f/0x70
[ 1832.134125] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
[ 1832.134502] ? lock_downgrade+0x6f0/0x6f0
[ 1832.134760] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
[ 1832.135170] ? smb2_check_message+0x1080/0x1080 [cifs]
[ 1832.135545] cifs_ioctl+0x1577/0x3320 [cifs]
[ 1832.135864] ? lock_downgrade+0x6f0/0x6f0
[ 1832.136125] ? cifs_readdir+0x2e60/0x2e60 [cifs]
[ 1832.136468] ? rcu_read_lock_sched_held+0x3f/0x70
[ 1832.136769] ? __rseq_handle_notify_resume+0x80b/0xbe0
[ 1832.137096] ? __up_read+0x192/0x710
[ 1832.137327] ? __ia32_sys_rseq+0xf0/0xf0
[ 1832.137578] ? __x64_sys_openat+0x11f/0x1d0
[ 1832.137850] __x64_sys_ioctl+0x127/0x190
[ 1832.138103] do_syscall_64+0x3b/0x90
[ 1832.138378] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 1832.138702] RIP: 0033:0x7fcee9a253df
[ 1832.138937] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 1832.140107] RSP: 002b:00007ffeba94a8a0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 1832.140606] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcee9a253df
[ 1832.141058] RDX: 00007ffeba94a910 RSI: 00000000c018cf07 RDI: 0000000000000003
[ 1832.141503] RBP: 00007ffeba94a930 R08: 00007fcee9b24db0 R09: 00007fcee9b45c4e
[ 1832.141948] R10: 00007fcee9918d40 R11: 0000000000000246 R12: 00007ffeba94aa48
[ 1832.142396] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007fcee9b78000
[ 1832.142851] </TASK>
[ 1832.142994] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload [last unloaded: cifs]
Cc: [email protected]
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 124 ++++++++++++++++++++++++++++--------------------------
1 file changed, 65 insertions(+), 59 deletions(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1631,6 +1631,7 @@ smb2_ioctl_query_info(const unsigned int
unsigned int size[2];
void *data[2];
int create_options = is_dir ? CREATE_NOT_FILE : CREATE_NOT_DIR;
+ void (*free_req1_func)(struct smb_rqst *r);
vars = kzalloc(sizeof(*vars), GFP_ATOMIC);
if (vars == NULL)
@@ -1640,17 +1641,18 @@ smb2_ioctl_query_info(const unsigned int
resp_buftype[0] = resp_buftype[1] = resp_buftype[2] = CIFS_NO_BUFFER;
- if (copy_from_user(&qi, arg, sizeof(struct smb_query_info)))
- goto e_fault;
-
+ if (copy_from_user(&qi, arg, sizeof(struct smb_query_info))) {
+ rc = -EFAULT;
+ goto free_vars;
+ }
if (qi.output_buffer_length > 1024) {
- kfree(vars);
- return -EINVAL;
+ rc = -EINVAL;
+ goto free_vars;
}
if (!ses || !server) {
- kfree(vars);
- return -EIO;
+ rc = -EIO;
+ goto free_vars;
}
if (smb3_encryption_required(tcon))
@@ -1659,8 +1661,8 @@ smb2_ioctl_query_info(const unsigned int
if (qi.output_buffer_length) {
buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length);
if (IS_ERR(buffer)) {
- kfree(vars);
- return PTR_ERR(buffer);
+ rc = PTR_ERR(buffer);
+ goto free_vars;
}
}
@@ -1699,48 +1701,45 @@ smb2_ioctl_query_info(const unsigned int
rc = SMB2_open_init(tcon, server,
&rqst[0], &oplock, &oparms, path);
if (rc)
- goto iqinf_exit;
+ goto free_output_buffer;
smb2_set_next_command(tcon, &rqst[0]);
/* Query */
if (qi.flags & PASSTHRU_FSCTL) {
/* Can eventually relax perm check since server enforces too */
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
rc = -EPERM;
- else {
- rqst[1].rq_iov = &vars->io_iov[0];
- rqst[1].rq_nvec = SMB2_IOCTL_IOV_SIZE;
-
- rc = SMB2_ioctl_init(tcon, server,
- &rqst[1],
- COMPOUND_FID, COMPOUND_FID,
- qi.info_type, true, buffer,
- qi.output_buffer_length,
- CIFSMaxBufSize -
- MAX_SMB2_CREATE_RESPONSE_SIZE -
- MAX_SMB2_CLOSE_RESPONSE_SIZE);
+ goto free_open_req;
}
+ rqst[1].rq_iov = &vars->io_iov[0];
+ rqst[1].rq_nvec = SMB2_IOCTL_IOV_SIZE;
+
+ rc = SMB2_ioctl_init(tcon, server, &rqst[1], COMPOUND_FID, COMPOUND_FID,
+ qi.info_type, true, buffer, qi.output_buffer_length,
+ CIFSMaxBufSize - MAX_SMB2_CREATE_RESPONSE_SIZE -
+ MAX_SMB2_CLOSE_RESPONSE_SIZE);
+ free_req1_func = SMB2_ioctl_free;
} else if (qi.flags == PASSTHRU_SET_INFO) {
/* Can eventually relax perm check since server enforces too */
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
rc = -EPERM;
- else if (qi.output_buffer_length < 8)
+ goto free_open_req;
+ }
+ if (qi.output_buffer_length < 8) {
rc = -EINVAL;
- else {
- rqst[1].rq_iov = &vars->si_iov[0];
- rqst[1].rq_nvec = 1;
-
- /* MS-FSCC 2.4.13 FileEndOfFileInformation */
- size[0] = 8;
- data[0] = buffer;
-
- rc = SMB2_set_info_init(tcon, server,
- &rqst[1],
- COMPOUND_FID, COMPOUND_FID,
- current->tgid,
- FILE_END_OF_FILE_INFORMATION,
- SMB2_O_INFO_FILE, 0, data, size);
+ goto free_open_req;
}
+ rqst[1].rq_iov = &vars->si_iov[0];
+ rqst[1].rq_nvec = 1;
+
+ /* MS-FSCC 2.4.13 FileEndOfFileInformation */
+ size[0] = 8;
+ data[0] = buffer;
+
+ rc = SMB2_set_info_init(tcon, server, &rqst[1], COMPOUND_FID, COMPOUND_FID,
+ current->tgid, FILE_END_OF_FILE_INFORMATION,
+ SMB2_O_INFO_FILE, 0, data, size);
+ free_req1_func = SMB2_set_info_free;
} else if (qi.flags == PASSTHRU_QUERY_INFO) {
rqst[1].rq_iov = &vars->qi_iov[0];
rqst[1].rq_nvec = 1;
@@ -1751,6 +1750,7 @@ smb2_ioctl_query_info(const unsigned int
qi.info_type, qi.additional_information,
qi.input_buffer_length,
qi.output_buffer_length, buffer);
+ free_req1_func = SMB2_query_info_free;
} else { /* unknown flags */
cifs_tcon_dbg(VFS, "Invalid passthru query flags: 0x%x\n",
qi.flags);
@@ -1758,7 +1758,7 @@ smb2_ioctl_query_info(const unsigned int
}
if (rc)
- goto iqinf_exit;
+ goto free_open_req;
smb2_set_next_command(tcon, &rqst[1]);
smb2_set_related(&rqst[1]);
@@ -1769,14 +1769,14 @@ smb2_ioctl_query_info(const unsigned int
rc = SMB2_close_init(tcon, server,
&rqst[2], COMPOUND_FID, COMPOUND_FID, false);
if (rc)
- goto iqinf_exit;
+ goto free_req_1;
smb2_set_related(&rqst[2]);
rc = compound_send_recv(xid, ses, server,
flags, 3, rqst,
resp_buftype, rsp_iov);
if (rc)
- goto iqinf_exit;
+ goto out;
/* No need to bump num_remote_opens since handle immediately closed */
if (qi.flags & PASSTHRU_FSCTL) {
@@ -1786,18 +1786,22 @@ smb2_ioctl_query_info(const unsigned int
qi.input_buffer_length = le32_to_cpu(io_rsp->OutputCount);
if (qi.input_buffer_length > 0 &&
le32_to_cpu(io_rsp->OutputOffset) + qi.input_buffer_length
- > rsp_iov[1].iov_len)
- goto e_fault;
+ > rsp_iov[1].iov_len) {
+ rc = -EFAULT;
+ goto out;
+ }
if (copy_to_user(&pqi->input_buffer_length,
&qi.input_buffer_length,
- sizeof(qi.input_buffer_length)))
- goto e_fault;
+ sizeof(qi.input_buffer_length))) {
+ rc = -EFAULT;
+ goto out;
+ }
if (copy_to_user((void __user *)pqi + sizeof(struct smb_query_info),
(const void *)io_rsp + le32_to_cpu(io_rsp->OutputOffset),
qi.input_buffer_length))
- goto e_fault;
+ rc = -EFAULT;
} else {
pqi = (struct smb_query_info __user *)arg;
qi_rsp = (struct smb2_query_info_rsp *)rsp_iov[1].iov_base;
@@ -1805,28 +1809,30 @@ smb2_ioctl_query_info(const unsigned int
qi.input_buffer_length = le32_to_cpu(qi_rsp->OutputBufferLength);
if (copy_to_user(&pqi->input_buffer_length,
&qi.input_buffer_length,
- sizeof(qi.input_buffer_length)))
- goto e_fault;
+ sizeof(qi.input_buffer_length))) {
+ rc = -EFAULT;
+ goto out;
+ }
if (copy_to_user(pqi + 1, qi_rsp->Buffer,
qi.input_buffer_length))
- goto e_fault;
+ rc = -EFAULT;
}
- iqinf_exit:
- cifs_small_buf_release(rqst[0].rq_iov[0].iov_base);
- cifs_small_buf_release(rqst[1].rq_iov[0].iov_base);
- cifs_small_buf_release(rqst[2].rq_iov[0].iov_base);
+out:
free_rsp_buf(resp_buftype[0], rsp_iov[0].iov_base);
free_rsp_buf(resp_buftype[1], rsp_iov[1].iov_base);
free_rsp_buf(resp_buftype[2], rsp_iov[2].iov_base);
- kfree(vars);
+ SMB2_close_free(&rqst[2]);
+free_req_1:
+ free_req1_func(&rqst[1]);
+free_open_req:
+ SMB2_open_free(&rqst[0]);
+free_output_buffer:
kfree(buffer);
+free_vars:
+ kfree(vars);
return rc;
-
-e_fault:
- rc = -EFAULT;
- goto iqinf_exit;
}
static ssize_t
From: Anssi Hannula <[email protected]>
commit 3105bc977d7cbf2edc35e24cc7e009686f6e4a56 upstream.
xhci_decode_usbsts() is expected to return a zero-terminated string by
its only caller, xhci_stop_endpoint_command_watchdog(), which directly
logs the return value:
xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
However, if no recognized bits are set in usbsts, the function will
return without having called any sprintf() and therefore return an
untouched non-zero-terminated caller-provided buffer, causing garbage
to be output to log.
Fix that by always including the raw value in the output.
Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes: 9c1aa36efdae ("xhci: Show host status when watchdog triggers and host is assumed dead.")
Cc: [email protected]
Signed-off-by: Anssi Hannula <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2624,8 +2624,11 @@ static inline const char *xhci_decode_us
{
int ret = 0;
+ ret = sprintf(str, " 0x%08x", usbsts);
+
if (usbsts == ~(u32)0)
- return " 0xffffffff";
+ return str;
+
if (usbsts & STS_HALT)
ret += sprintf(str + ret, " HCHalted");
if (usbsts & STS_FATAL)
From: James Smart <[email protected]>
commit 07e0984b96ec1ba8c6de1c092b986b00ea0c114c upstream.
In the original FPIN commit, stats were incremented by the event_count.
Event_count is the minimum # of events that must occur before an FPIN is
sent. Thus, its not the actual number of events, and could be significantly
off (too low) as it doesn't reflect anything not reported. Rather than
attempt to count events, have the statistic count how many FPINS cross the
threshold and were reported.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3dcfe0de5a97 ("scsi: fc: Parse FPIN packets and update statistics")
Cc: <[email protected]> # v5.11+
Cc: Shyam Sundar <[email protected]>
Cc: Nilesh Javali <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_transport_fc.c | 39 ++++++++++++++++-----------------------
1 file changed, 16 insertions(+), 23 deletions(-)
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -34,7 +34,7 @@ static int fc_bsg_hostadd(struct Scsi_Ho
static int fc_bsg_rportadd(struct Scsi_Host *, struct fc_rport *);
static void fc_bsg_remove(struct request_queue *);
static void fc_bsg_goose_queue(struct fc_rport *);
-static void fc_li_stats_update(struct fc_fn_li_desc *li_desc,
+static void fc_li_stats_update(u16 event_type,
struct fc_fpin_stats *stats);
static void fc_delivery_stats_update(u32 reason_code,
struct fc_fpin_stats *stats);
@@ -670,42 +670,34 @@ fc_find_rport_by_wwpn(struct Scsi_Host *
EXPORT_SYMBOL(fc_find_rport_by_wwpn);
static void
-fc_li_stats_update(struct fc_fn_li_desc *li_desc,
+fc_li_stats_update(u16 event_type,
struct fc_fpin_stats *stats)
{
- stats->li += be32_to_cpu(li_desc->event_count);
- switch (be16_to_cpu(li_desc->event_type)) {
+ stats->li++;
+ switch (event_type) {
case FPIN_LI_UNKNOWN:
- stats->li_failure_unknown +=
- be32_to_cpu(li_desc->event_count);
+ stats->li_failure_unknown++;
break;
case FPIN_LI_LINK_FAILURE:
- stats->li_link_failure_count +=
- be32_to_cpu(li_desc->event_count);
+ stats->li_link_failure_count++;
break;
case FPIN_LI_LOSS_OF_SYNC:
- stats->li_loss_of_sync_count +=
- be32_to_cpu(li_desc->event_count);
+ stats->li_loss_of_sync_count++;
break;
case FPIN_LI_LOSS_OF_SIG:
- stats->li_loss_of_signals_count +=
- be32_to_cpu(li_desc->event_count);
+ stats->li_loss_of_signals_count++;
break;
case FPIN_LI_PRIM_SEQ_ERR:
- stats->li_prim_seq_err_count +=
- be32_to_cpu(li_desc->event_count);
+ stats->li_prim_seq_err_count++;
break;
case FPIN_LI_INVALID_TX_WD:
- stats->li_invalid_tx_word_count +=
- be32_to_cpu(li_desc->event_count);
+ stats->li_invalid_tx_word_count++;
break;
case FPIN_LI_INVALID_CRC:
- stats->li_invalid_crc_count +=
- be32_to_cpu(li_desc->event_count);
+ stats->li_invalid_crc_count++;
break;
case FPIN_LI_DEVICE_SPEC:
- stats->li_device_specific +=
- be32_to_cpu(li_desc->event_count);
+ stats->li_device_specific++;
break;
}
}
@@ -767,6 +759,7 @@ fc_fpin_li_stats_update(struct Scsi_Host
struct fc_rport *attach_rport = NULL;
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
struct fc_fn_li_desc *li_desc = (struct fc_fn_li_desc *)tlv;
+ u16 event_type = be16_to_cpu(li_desc->event_type);
u64 wwpn;
rport = fc_find_rport_by_wwpn(shost,
@@ -775,7 +768,7 @@ fc_fpin_li_stats_update(struct Scsi_Host
(rport->roles & FC_PORT_ROLE_FCP_TARGET ||
rport->roles & FC_PORT_ROLE_NVME_TARGET)) {
attach_rport = rport;
- fc_li_stats_update(li_desc, &attach_rport->fpin_stats);
+ fc_li_stats_update(event_type, &attach_rport->fpin_stats);
}
if (be32_to_cpu(li_desc->pname_count) > 0) {
@@ -789,14 +782,14 @@ fc_fpin_li_stats_update(struct Scsi_Host
rport->roles & FC_PORT_ROLE_NVME_TARGET)) {
if (rport == attach_rport)
continue;
- fc_li_stats_update(li_desc,
+ fc_li_stats_update(event_type,
&rport->fpin_stats);
}
}
}
if (fc_host->port_name == be64_to_cpu(li_desc->attached_wwpn))
- fc_li_stats_update(li_desc, &fc_host->fpin_stats);
+ fc_li_stats_update(event_type, &fc_host->fpin_stats);
}
/*
From: Sakari Ailus <[email protected]>
[ Upstream commit 24bb30c8c894ec7213ad810b46e2a6a4c12136c1 ]
Pointers V4L2 pixelformat and dataformat fields in a few packed structs
are directly passed to printk family of functions. This could result in an
unaligned access albeit no such possibility appears to exist at the
moment i.e. this clang warning appears to be a false positive.
Address the warning by copying the pixelformat or dataformat value to a
local variable first.
Reported-by: kernel test robot <[email protected]>
Fixes: e927e1e0f0dd ("v4l: ioctl: Use %p4cc printk modifier to print FourCC codes")
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/v4l2-core/v4l2-ioctl.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index c7308a2a80a0..7c596a85f34f 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -279,8 +279,8 @@ static void v4l_print_format(const void *arg, bool write_only)
const struct v4l2_vbi_format *vbi;
const struct v4l2_sliced_vbi_format *sliced;
const struct v4l2_window *win;
- const struct v4l2_sdr_format *sdr;
const struct v4l2_meta_format *meta;
+ u32 pixelformat;
u32 planes;
unsigned i;
@@ -299,8 +299,9 @@ static void v4l_print_format(const void *arg, bool write_only)
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
mp = &p->fmt.pix_mp;
+ pixelformat = mp->pixelformat;
pr_cont(", width=%u, height=%u, format=%p4cc, field=%s, colorspace=%d, num_planes=%u, flags=0x%x, ycbcr_enc=%u, quantization=%u, xfer_func=%u\n",
- mp->width, mp->height, &mp->pixelformat,
+ mp->width, mp->height, &pixelformat,
prt_names(mp->field, v4l2_field_names),
mp->colorspace, mp->num_planes, mp->flags,
mp->ycbcr_enc, mp->quantization, mp->xfer_func);
@@ -343,14 +344,15 @@ static void v4l_print_format(const void *arg, bool write_only)
break;
case V4L2_BUF_TYPE_SDR_CAPTURE:
case V4L2_BUF_TYPE_SDR_OUTPUT:
- sdr = &p->fmt.sdr;
- pr_cont(", pixelformat=%p4cc\n", &sdr->pixelformat);
+ pixelformat = p->fmt.sdr.pixelformat;
+ pr_cont(", pixelformat=%p4cc\n", &pixelformat);
break;
case V4L2_BUF_TYPE_META_CAPTURE:
case V4L2_BUF_TYPE_META_OUTPUT:
meta = &p->fmt.meta;
+ pixelformat = meta->dataformat;
pr_cont(", dataformat=%p4cc, buffersize=%u\n",
- &meta->dataformat, meta->buffersize);
+ &pixelformat, meta->buffersize);
break;
}
}
--
2.34.1
From: Alexander Usyskin <[email protected]>
commit 7bbbd0845818cffa9fa8ccfe52fa1cad58e7e4f2 upstream.
Add Alder Lake N device ID.
Cc: <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/mei/hw-me-regs.h | 1 +
drivers/misc/mei/pci-me.c | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -107,6 +107,7 @@
#define MEI_DEV_ID_ADP_S 0x7AE8 /* Alder Lake Point S */
#define MEI_DEV_ID_ADP_LP 0x7A60 /* Alder Lake Point LP */
#define MEI_DEV_ID_ADP_P 0x51E0 /* Alder Lake Point P */
+#define MEI_DEV_ID_ADP_N 0x54E0 /* Alder Lake Point N */
/*
* MEI HW Section
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -113,6 +113,7 @@ static const struct pci_device_id mei_me
{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_S, MEI_ME_PCH15_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_LP, MEI_ME_PCH15_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)},
/* required last entry */
{0, }
From: Jani Nikula <[email protected]>
commit 24a644ebbfd3b13cda702f98907f9dd123e34bf9 upstream.
The mapping from enum port to whatever port numbering scheme is used by
the SWSCI Display Power State Notification is odd, and the memory of it
has faded. In any case, the parameter only has space for ports numbered
[0..4], and UBSAN reports bit shift beyond it when the platform has port
F or more.
Since the SWSCI functionality is supposed to be obsolete for new
platforms (i.e. ones that might have port F or more), just bail out
early if the mapped and mangled port number is beyond what the Display
Power State Notification can support.
Fixes: 9c4b0a683193 ("drm/i915: add opregion function to notify bios of encoder enable/disable")
Cc: <[email protected]> # v3.13+
Cc: Ville Syrjälä <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_opregion.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/gpu/drm/i915/display/intel_opregion.c
+++ b/drivers/gpu/drm/i915/display/intel_opregion.c
@@ -376,6 +376,21 @@ int intel_opregion_notify_encoder(struct
return -EINVAL;
}
+ /*
+ * The port numbering and mapping here is bizarre. The now-obsolete
+ * swsci spec supports ports numbered [0..4]. Port E is handled as a
+ * special case, but port F and beyond are not. The functionality is
+ * supposed to be obsolete for new platforms. Just bail out if the port
+ * number is out of bounds after mapping.
+ */
+ if (port > 4) {
+ drm_dbg_kms(&dev_priv->drm,
+ "[ENCODER:%d:%s] port %c (index %u) out of bounds for display power state notification\n",
+ intel_encoder->base.base.id, intel_encoder->base.name,
+ port_name(intel_encoder->port), port);
+ return -EINVAL;
+ }
+
if (!enable)
parm |= 4 << 8;
From: Johan Hovold <[email protected]>
commit d42b3ad105b5d3481f6a56bc789aa2b27aa09325 upstream.
Make sure to disable runtime PM before returning on probe errors.
Fixes: 479f7a118105 ("[media] davinci: vpif: adaptions for DT support")
Cc: [email protected]
Cc: Kevin Hilman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/davinci/vpif.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/media/platform/davinci/vpif.c
+++ b/drivers/media/platform/davinci/vpif.c
@@ -428,6 +428,7 @@ static int vpif_probe(struct platform_de
static struct resource *res, *res_irq;
struct platform_device *pdev_capture, *pdev_display;
struct device_node *endpoint = NULL;
+ int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
vpif_base = devm_ioremap_resource(&pdev->dev, res);
@@ -457,8 +458,8 @@ static int vpif_probe(struct platform_de
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res_irq) {
dev_warn(&pdev->dev, "Missing IRQ resource.\n");
- pm_runtime_put(&pdev->dev);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_put_rpm;
}
pdev_capture = devm_kzalloc(&pdev->dev, sizeof(*pdev_capture),
@@ -492,6 +493,12 @@ static int vpif_probe(struct platform_de
}
return 0;
+
+err_put_rpm:
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return ret;
}
static int vpif_remove(struct platform_device *pdev)
From: Corentin Labbe <[email protected]>
[ Upstream commit 7f22421103c5a7f9a1726f0ed125274c38174ddb ]
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 46c5338db7bd45b2 ("crypto: sl3516 - Add sl3516 crypto engine")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/gemini/sl3516-ce-cipher.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/crypto/gemini/sl3516-ce-cipher.c b/drivers/crypto/gemini/sl3516-ce-cipher.c
index c1c2b1d86663..f2be0a7d7f7a 100644
--- a/drivers/crypto/gemini/sl3516-ce-cipher.c
+++ b/drivers/crypto/gemini/sl3516-ce-cipher.c
@@ -264,7 +264,9 @@ static int sl3516_ce_handle_cipher_request(struct crypto_engine *engine, void *a
struct skcipher_request *breq = container_of(areq, struct skcipher_request, base);
err = sl3516_ce_cipher(breq);
+ local_bh_disable();
crypto_finalize_skcipher_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
--
2.34.1
From: Petr Vorel <[email protected]>
[ Upstream commit 647d41d3952d726d4ae49e853a9eff68ebad3b3f ]
vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.
These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):
[ 0.540953] Failed to allocate xts(aes) fallback: -2
[ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[ 0.544440] Failed to allocate ctr(aes) fallback: -2
[ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[ 0.547992] Failed to allocate cbc(aes) fallback: -2
[ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[ 0.550745] Failed to allocate transformation for 'aes': -2
[ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)
Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS")
Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64")
Suggested-by: Nicolai Stange <[email protected]>
Signed-off-by: Petr Vorel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/vmx/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/crypto/vmx/Kconfig b/drivers/crypto/vmx/Kconfig
index c85fab7ef0bd..b2c28b87f14b 100644
--- a/drivers/crypto/vmx/Kconfig
+++ b/drivers/crypto/vmx/Kconfig
@@ -2,7 +2,11 @@
config CRYPTO_DEV_VMX_ENCRYPT
tristate "Encryption acceleration support on P8 CPU"
depends on CRYPTO_DEV_VMX
+ select CRYPTO_AES
+ select CRYPTO_CBC
+ select CRYPTO_CTR
select CRYPTO_GHASH
+ select CRYPTO_XTS
default m
help
Support for VMX cryptographic acceleration instructions on Power8 CPU.
--
2.34.1
From: Johan Hovold <[email protected]>
commit 202c08914ba50dd324e42d5ad99535a89f242560 upstream.
Make sure to free the platform device also in the unlikely event that
registration fails.
Fixes: 0589e8889dce ("drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb")
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: [email protected] # 5.14
Cc: Miaoqian Lin <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/sysfb_simplefb.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
--- a/drivers/firmware/sysfb_simplefb.c
+++ b/drivers/firmware/sysfb_simplefb.c
@@ -113,16 +113,21 @@ __init int sysfb_create_simplefb(const s
sysfb_apply_efi_quirks(pd);
ret = platform_device_add_resources(pd, &res, 1);
- if (ret) {
- platform_device_put(pd);
- return ret;
- }
+ if (ret)
+ goto err_put_device;
ret = platform_device_add_data(pd, mode, sizeof(*mode));
- if (ret) {
- platform_device_put(pd);
- return ret;
- }
+ if (ret)
+ goto err_put_device;
- return platform_device_add(pd);
+ ret = platform_device_add(pd);
+ if (ret)
+ goto err_put_device;
+
+ return 0;
+
+err_put_device:
+ platform_device_put(pd);
+
+ return ret;
}
From: Tudor Ambarus <[email protected]>
commit cbb92a7717d2e1c512b7e81c6b22c7298b58a881 upstream.
The "atmel,use-dma-rx", "atmel,use-dma-rx" dt properties are not used by
the i2c-at91 driver, nor they are defined in the bindings file, thus remove
them.
Cc: [email protected]
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Tudor Ambarus <[email protected]>
Reviewed-by: Eugen Hristev <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/sama7g5.dtsi | 6 ------
1 file changed, 6 deletions(-)
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -319,8 +319,6 @@
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
<&dma0 AT91_XDMAC_DT_PERID(8)>;
dma-names = "rx", "tx";
- atmel,use-dma-rx;
- atmel,use-dma-tx;
status = "disabled";
};
};
@@ -485,8 +483,6 @@
dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
<&dma0 AT91_XDMAC_DT_PERID(22)>;
dma-names = "rx", "tx";
- atmel,use-dma-rx;
- atmel,use-dma-tx;
status = "disabled";
};
};
@@ -511,8 +507,6 @@
dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
<&dma0 AT91_XDMAC_DT_PERID(24)>;
dma-names = "rx", "tx";
- atmel,use-dma-rx;
- atmel,use-dma-tx;
status = "disabled";
};
};
From: Paul Davey <[email protected]>
commit ed2d980503235829aa3e0c7ae3b82374c30a081c upstream.
The MHI driver does not work on big endian architectures. The
controller never transitions into mission mode. This appears to be due
to the modem device expecting the various contexts and transfer rings to
have fields in little endian order in memory, but the driver constructs
them in native endianness.
Fix MHI event, channel and command contexts and TRE handling macros to
use explicit conversion to little endian. Mark fields in relevant
structures as little endian to document this requirement.
Fixes: a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions")
Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: [email protected]
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Signed-off-by: Paul Davey <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bus/mhi/core/debugfs.c | 26 ++++----
drivers/bus/mhi/core/init.c | 36 ++++++------
drivers/bus/mhi/core/internal.h | 119 ++++++++++++++++++++--------------------
drivers/bus/mhi/core/main.c | 22 +++----
drivers/bus/mhi/core/pm.c | 4 -
5 files changed, 104 insertions(+), 103 deletions(-)
--- a/drivers/bus/mhi/core/debugfs.c
+++ b/drivers/bus/mhi/core/debugfs.c
@@ -60,16 +60,16 @@ static int mhi_debugfs_events_show(struc
}
seq_printf(m, "Index: %d intmod count: %lu time: %lu",
- i, (er_ctxt->intmod & EV_CTX_INTMODC_MASK) >>
+ i, (le32_to_cpu(er_ctxt->intmod) & EV_CTX_INTMODC_MASK) >>
EV_CTX_INTMODC_SHIFT,
- (er_ctxt->intmod & EV_CTX_INTMODT_MASK) >>
+ (le32_to_cpu(er_ctxt->intmod) & EV_CTX_INTMODT_MASK) >>
EV_CTX_INTMODT_SHIFT);
- seq_printf(m, " base: 0x%0llx len: 0x%llx", er_ctxt->rbase,
- er_ctxt->rlen);
+ seq_printf(m, " base: 0x%0llx len: 0x%llx", le64_to_cpu(er_ctxt->rbase),
+ le64_to_cpu(er_ctxt->rlen));
- seq_printf(m, " rp: 0x%llx wp: 0x%llx", er_ctxt->rp,
- er_ctxt->wp);
+ seq_printf(m, " rp: 0x%llx wp: 0x%llx", le64_to_cpu(er_ctxt->rp),
+ le64_to_cpu(er_ctxt->wp));
seq_printf(m, " local rp: 0x%pK db: 0x%pad\n", ring->rp,
&mhi_event->db_cfg.db_val);
@@ -106,18 +106,18 @@ static int mhi_debugfs_channels_show(str
seq_printf(m,
"%s(%u) state: 0x%lx brstmode: 0x%lx pollcfg: 0x%lx",
- mhi_chan->name, mhi_chan->chan, (chan_ctxt->chcfg &
+ mhi_chan->name, mhi_chan->chan, (le32_to_cpu(chan_ctxt->chcfg) &
CHAN_CTX_CHSTATE_MASK) >> CHAN_CTX_CHSTATE_SHIFT,
- (chan_ctxt->chcfg & CHAN_CTX_BRSTMODE_MASK) >>
- CHAN_CTX_BRSTMODE_SHIFT, (chan_ctxt->chcfg &
+ (le32_to_cpu(chan_ctxt->chcfg) & CHAN_CTX_BRSTMODE_MASK) >>
+ CHAN_CTX_BRSTMODE_SHIFT, (le32_to_cpu(chan_ctxt->chcfg) &
CHAN_CTX_POLLCFG_MASK) >> CHAN_CTX_POLLCFG_SHIFT);
- seq_printf(m, " type: 0x%x event ring: %u", chan_ctxt->chtype,
- chan_ctxt->erindex);
+ seq_printf(m, " type: 0x%x event ring: %u", le32_to_cpu(chan_ctxt->chtype),
+ le32_to_cpu(chan_ctxt->erindex));
seq_printf(m, " base: 0x%llx len: 0x%llx rp: 0x%llx wp: 0x%llx",
- chan_ctxt->rbase, chan_ctxt->rlen, chan_ctxt->rp,
- chan_ctxt->wp);
+ le64_to_cpu(chan_ctxt->rbase), le64_to_cpu(chan_ctxt->rlen),
+ le64_to_cpu(chan_ctxt->rp), le64_to_cpu(chan_ctxt->wp));
seq_printf(m, " local rp: 0x%pK local wp: 0x%pK db: 0x%pad\n",
ring->rp, ring->wp,
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -290,17 +290,17 @@ int mhi_init_dev_ctxt(struct mhi_control
if (mhi_chan->offload_ch)
continue;
- tmp = chan_ctxt->chcfg;
+ tmp = le32_to_cpu(chan_ctxt->chcfg);
tmp &= ~CHAN_CTX_CHSTATE_MASK;
tmp |= (MHI_CH_STATE_DISABLED << CHAN_CTX_CHSTATE_SHIFT);
tmp &= ~CHAN_CTX_BRSTMODE_MASK;
tmp |= (mhi_chan->db_cfg.brstmode << CHAN_CTX_BRSTMODE_SHIFT);
tmp &= ~CHAN_CTX_POLLCFG_MASK;
tmp |= (mhi_chan->db_cfg.pollcfg << CHAN_CTX_POLLCFG_SHIFT);
- chan_ctxt->chcfg = tmp;
+ chan_ctxt->chcfg = cpu_to_le32(tmp);
- chan_ctxt->chtype = mhi_chan->type;
- chan_ctxt->erindex = mhi_chan->er_index;
+ chan_ctxt->chtype = cpu_to_le32(mhi_chan->type);
+ chan_ctxt->erindex = cpu_to_le32(mhi_chan->er_index);
mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
mhi_chan->tre_ring.db_addr = (void __iomem *)&chan_ctxt->wp;
@@ -325,14 +325,14 @@ int mhi_init_dev_ctxt(struct mhi_control
if (mhi_event->offload_ev)
continue;
- tmp = er_ctxt->intmod;
+ tmp = le32_to_cpu(er_ctxt->intmod);
tmp &= ~EV_CTX_INTMODC_MASK;
tmp &= ~EV_CTX_INTMODT_MASK;
tmp |= (mhi_event->intmod << EV_CTX_INTMODT_SHIFT);
- er_ctxt->intmod = tmp;
+ er_ctxt->intmod = cpu_to_le32(tmp);
- er_ctxt->ertype = MHI_ER_TYPE_VALID;
- er_ctxt->msivec = mhi_event->irq;
+ er_ctxt->ertype = cpu_to_le32(MHI_ER_TYPE_VALID);
+ er_ctxt->msivec = cpu_to_le32(mhi_event->irq);
mhi_event->db_cfg.db_mode = true;
ring->el_size = sizeof(struct mhi_tre);
@@ -346,9 +346,9 @@ int mhi_init_dev_ctxt(struct mhi_control
* ring is empty
*/
ring->rp = ring->wp = ring->base;
- er_ctxt->rbase = ring->iommu_base;
+ er_ctxt->rbase = cpu_to_le64(ring->iommu_base);
er_ctxt->rp = er_ctxt->wp = er_ctxt->rbase;
- er_ctxt->rlen = ring->len;
+ er_ctxt->rlen = cpu_to_le64(ring->len);
ring->ctxt_wp = &er_ctxt->wp;
}
@@ -375,9 +375,9 @@ int mhi_init_dev_ctxt(struct mhi_control
goto error_alloc_cmd;
ring->rp = ring->wp = ring->base;
- cmd_ctxt->rbase = ring->iommu_base;
+ cmd_ctxt->rbase = cpu_to_le64(ring->iommu_base);
cmd_ctxt->rp = cmd_ctxt->wp = cmd_ctxt->rbase;
- cmd_ctxt->rlen = ring->len;
+ cmd_ctxt->rlen = cpu_to_le64(ring->len);
ring->ctxt_wp = &cmd_ctxt->wp;
}
@@ -578,10 +578,10 @@ void mhi_deinit_chan_ctxt(struct mhi_con
chan_ctxt->rp = 0;
chan_ctxt->wp = 0;
- tmp = chan_ctxt->chcfg;
+ tmp = le32_to_cpu(chan_ctxt->chcfg);
tmp &= ~CHAN_CTX_CHSTATE_MASK;
tmp |= (MHI_CH_STATE_DISABLED << CHAN_CTX_CHSTATE_SHIFT);
- chan_ctxt->chcfg = tmp;
+ chan_ctxt->chcfg = cpu_to_le32(tmp);
/* Update to all cores */
smp_wmb();
@@ -615,14 +615,14 @@ int mhi_init_chan_ctxt(struct mhi_contro
return -ENOMEM;
}
- tmp = chan_ctxt->chcfg;
+ tmp = le32_to_cpu(chan_ctxt->chcfg);
tmp &= ~CHAN_CTX_CHSTATE_MASK;
tmp |= (MHI_CH_STATE_ENABLED << CHAN_CTX_CHSTATE_SHIFT);
- chan_ctxt->chcfg = tmp;
+ chan_ctxt->chcfg = cpu_to_le32(tmp);
- chan_ctxt->rbase = tre_ring->iommu_base;
+ chan_ctxt->rbase = cpu_to_le64(tre_ring->iommu_base);
chan_ctxt->rp = chan_ctxt->wp = chan_ctxt->rbase;
- chan_ctxt->rlen = tre_ring->len;
+ chan_ctxt->rlen = cpu_to_le64(tre_ring->len);
tre_ring->ctxt_wp = &chan_ctxt->wp;
tre_ring->rp = tre_ring->wp = tre_ring->base;
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -209,14 +209,14 @@ extern struct bus_type mhi_bus_type;
#define EV_CTX_INTMODT_MASK GENMASK(31, 16)
#define EV_CTX_INTMODT_SHIFT 16
struct mhi_event_ctxt {
- __u32 intmod;
- __u32 ertype;
- __u32 msivec;
-
- __u64 rbase __packed __aligned(4);
- __u64 rlen __packed __aligned(4);
- __u64 rp __packed __aligned(4);
- __u64 wp __packed __aligned(4);
+ __le32 intmod;
+ __le32 ertype;
+ __le32 msivec;
+
+ __le64 rbase __packed __aligned(4);
+ __le64 rlen __packed __aligned(4);
+ __le64 rp __packed __aligned(4);
+ __le64 wp __packed __aligned(4);
};
#define CHAN_CTX_CHSTATE_MASK GENMASK(7, 0)
@@ -227,25 +227,25 @@ struct mhi_event_ctxt {
#define CHAN_CTX_POLLCFG_SHIFT 10
#define CHAN_CTX_RESERVED_MASK GENMASK(31, 16)
struct mhi_chan_ctxt {
- __u32 chcfg;
- __u32 chtype;
- __u32 erindex;
-
- __u64 rbase __packed __aligned(4);
- __u64 rlen __packed __aligned(4);
- __u64 rp __packed __aligned(4);
- __u64 wp __packed __aligned(4);
+ __le32 chcfg;
+ __le32 chtype;
+ __le32 erindex;
+
+ __le64 rbase __packed __aligned(4);
+ __le64 rlen __packed __aligned(4);
+ __le64 rp __packed __aligned(4);
+ __le64 wp __packed __aligned(4);
};
struct mhi_cmd_ctxt {
- __u32 reserved0;
- __u32 reserved1;
- __u32 reserved2;
-
- __u64 rbase __packed __aligned(4);
- __u64 rlen __packed __aligned(4);
- __u64 rp __packed __aligned(4);
- __u64 wp __packed __aligned(4);
+ __le32 reserved0;
+ __le32 reserved1;
+ __le32 reserved2;
+
+ __le64 rbase __packed __aligned(4);
+ __le64 rlen __packed __aligned(4);
+ __le64 rp __packed __aligned(4);
+ __le64 wp __packed __aligned(4);
};
struct mhi_ctxt {
@@ -258,8 +258,8 @@ struct mhi_ctxt {
};
struct mhi_tre {
- u64 ptr;
- u32 dword[2];
+ __le64 ptr;
+ __le32 dword[2];
};
struct bhi_vec_entry {
@@ -277,57 +277,58 @@ enum mhi_cmd_type {
/* No operation command */
#define MHI_TRE_CMD_NOOP_PTR (0)
#define MHI_TRE_CMD_NOOP_DWORD0 (0)
-#define MHI_TRE_CMD_NOOP_DWORD1 (MHI_CMD_NOP << 16)
+#define MHI_TRE_CMD_NOOP_DWORD1 (cpu_to_le32(MHI_CMD_NOP << 16))
/* Channel reset command */
#define MHI_TRE_CMD_RESET_PTR (0)
#define MHI_TRE_CMD_RESET_DWORD0 (0)
-#define MHI_TRE_CMD_RESET_DWORD1(chid) ((chid << 24) | \
- (MHI_CMD_RESET_CHAN << 16))
+#define MHI_TRE_CMD_RESET_DWORD1(chid) (cpu_to_le32((chid << 24) | \
+ (MHI_CMD_RESET_CHAN << 16)))
/* Channel stop command */
#define MHI_TRE_CMD_STOP_PTR (0)
#define MHI_TRE_CMD_STOP_DWORD0 (0)
-#define MHI_TRE_CMD_STOP_DWORD1(chid) ((chid << 24) | \
- (MHI_CMD_STOP_CHAN << 16))
+#define MHI_TRE_CMD_STOP_DWORD1(chid) (cpu_to_le32((chid << 24) | \
+ (MHI_CMD_STOP_CHAN << 16)))
/* Channel start command */
#define MHI_TRE_CMD_START_PTR (0)
#define MHI_TRE_CMD_START_DWORD0 (0)
-#define MHI_TRE_CMD_START_DWORD1(chid) ((chid << 24) | \
- (MHI_CMD_START_CHAN << 16))
+#define MHI_TRE_CMD_START_DWORD1(chid) (cpu_to_le32((chid << 24) | \
+ (MHI_CMD_START_CHAN << 16)))
-#define MHI_TRE_GET_CMD_CHID(tre) (((tre)->dword[1] >> 24) & 0xFF)
-#define MHI_TRE_GET_CMD_TYPE(tre) (((tre)->dword[1] >> 16) & 0xFF)
+#define MHI_TRE_GET_DWORD(tre, word) (le32_to_cpu((tre)->dword[(word)]))
+#define MHI_TRE_GET_CMD_CHID(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 24) & 0xFF)
+#define MHI_TRE_GET_CMD_TYPE(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 16) & 0xFF)
/* Event descriptor macros */
-#define MHI_TRE_EV_PTR(ptr) (ptr)
-#define MHI_TRE_EV_DWORD0(code, len) ((code << 24) | len)
-#define MHI_TRE_EV_DWORD1(chid, type) ((chid << 24) | (type << 16))
-#define MHI_TRE_GET_EV_PTR(tre) ((tre)->ptr)
-#define MHI_TRE_GET_EV_CODE(tre) (((tre)->dword[0] >> 24) & 0xFF)
-#define MHI_TRE_GET_EV_LEN(tre) ((tre)->dword[0] & 0xFFFF)
-#define MHI_TRE_GET_EV_CHID(tre) (((tre)->dword[1] >> 24) & 0xFF)
-#define MHI_TRE_GET_EV_TYPE(tre) (((tre)->dword[1] >> 16) & 0xFF)
-#define MHI_TRE_GET_EV_STATE(tre) (((tre)->dword[0] >> 24) & 0xFF)
-#define MHI_TRE_GET_EV_EXECENV(tre) (((tre)->dword[0] >> 24) & 0xFF)
-#define MHI_TRE_GET_EV_SEQ(tre) ((tre)->dword[0])
-#define MHI_TRE_GET_EV_TIME(tre) ((tre)->ptr)
-#define MHI_TRE_GET_EV_COOKIE(tre) lower_32_bits((tre)->ptr)
-#define MHI_TRE_GET_EV_VEID(tre) (((tre)->dword[0] >> 16) & 0xFF)
-#define MHI_TRE_GET_EV_LINKSPEED(tre) (((tre)->dword[1] >> 24) & 0xFF)
-#define MHI_TRE_GET_EV_LINKWIDTH(tre) ((tre)->dword[0] & 0xFF)
+#define MHI_TRE_EV_PTR(ptr) (cpu_to_le64(ptr))
+#define MHI_TRE_EV_DWORD0(code, len) (cpu_to_le32((code << 24) | len))
+#define MHI_TRE_EV_DWORD1(chid, type) (cpu_to_le32((chid << 24) | (type << 16)))
+#define MHI_TRE_GET_EV_PTR(tre) (le64_to_cpu((tre)->ptr))
+#define MHI_TRE_GET_EV_CODE(tre) ((MHI_TRE_GET_DWORD(tre, 0) >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_LEN(tre) (MHI_TRE_GET_DWORD(tre, 0) & 0xFFFF)
+#define MHI_TRE_GET_EV_CHID(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_TYPE(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 16) & 0xFF)
+#define MHI_TRE_GET_EV_STATE(tre) ((MHI_TRE_GET_DWORD(tre, 0) >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_EXECENV(tre) ((MHI_TRE_GET_DWORD(tre, 0) >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_SEQ(tre) MHI_TRE_GET_DWORD(tre, 0)
+#define MHI_TRE_GET_EV_TIME(tre) (MHI_TRE_GET_EV_PTR(tre))
+#define MHI_TRE_GET_EV_COOKIE(tre) lower_32_bits(MHI_TRE_GET_EV_PTR(tre))
+#define MHI_TRE_GET_EV_VEID(tre) ((MHI_TRE_GET_DWORD(tre, 0) >> 16) & 0xFF)
+#define MHI_TRE_GET_EV_LINKSPEED(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 24) & 0xFF)
+#define MHI_TRE_GET_EV_LINKWIDTH(tre) (MHI_TRE_GET_DWORD(tre, 0) & 0xFF)
/* Transfer descriptor macros */
-#define MHI_TRE_DATA_PTR(ptr) (ptr)
-#define MHI_TRE_DATA_DWORD0(len) (len & MHI_MAX_MTU)
-#define MHI_TRE_DATA_DWORD1(bei, ieot, ieob, chain) ((2 << 16) | (bei << 10) \
- | (ieot << 9) | (ieob << 8) | chain)
+#define MHI_TRE_DATA_PTR(ptr) (cpu_to_le64(ptr))
+#define MHI_TRE_DATA_DWORD0(len) (cpu_to_le32(len & MHI_MAX_MTU))
+#define MHI_TRE_DATA_DWORD1(bei, ieot, ieob, chain) (cpu_to_le32((2 << 16) | (bei << 10) \
+ | (ieot << 9) | (ieob << 8) | chain))
/* RSC transfer descriptor macros */
-#define MHI_RSCTRE_DATA_PTR(ptr, len) (((u64)len << 48) | ptr)
-#define MHI_RSCTRE_DATA_DWORD0(cookie) (cookie)
-#define MHI_RSCTRE_DATA_DWORD1 (MHI_PKT_TYPE_COALESCING << 16)
+#define MHI_RSCTRE_DATA_PTR(ptr, len) (cpu_to_le64(((u64)len << 48) | ptr))
+#define MHI_RSCTRE_DATA_DWORD0(cookie) (cpu_to_le32(cookie))
+#define MHI_RSCTRE_DATA_DWORD1 (cpu_to_le32(MHI_PKT_TYPE_COALESCING << 16))
enum mhi_pkt_type {
MHI_PKT_TYPE_INVALID = 0x0,
@@ -499,7 +500,7 @@ struct state_transition {
struct mhi_ring {
dma_addr_t dma_handle;
dma_addr_t iommu_base;
- u64 *ctxt_wp; /* point to ctxt wp */
+ __le64 *ctxt_wp; /* point to ctxt wp */
void *pre_aligned;
void *base;
void *rp;
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -114,7 +114,7 @@ void mhi_ring_er_db(struct mhi_event *mh
struct mhi_ring *ring = &mhi_event->ring;
mhi_event->db_cfg.process_db(mhi_event->mhi_cntrl, &mhi_event->db_cfg,
- ring->db_addr, *ring->ctxt_wp);
+ ring->db_addr, le64_to_cpu(*ring->ctxt_wp));
}
void mhi_ring_cmd_db(struct mhi_controller *mhi_cntrl, struct mhi_cmd *mhi_cmd)
@@ -123,7 +123,7 @@ void mhi_ring_cmd_db(struct mhi_controll
struct mhi_ring *ring = &mhi_cmd->ring;
db = ring->iommu_base + (ring->wp - ring->base);
- *ring->ctxt_wp = db;
+ *ring->ctxt_wp = cpu_to_le64(db);
mhi_write_db(mhi_cntrl, ring->db_addr, db);
}
@@ -140,7 +140,7 @@ void mhi_ring_chan_db(struct mhi_control
* before letting h/w know there is new element to fetch.
*/
dma_wmb();
- *ring->ctxt_wp = db;
+ *ring->ctxt_wp = cpu_to_le64(db);
mhi_chan->db_cfg.process_db(mhi_cntrl, &mhi_chan->db_cfg,
ring->db_addr, db);
@@ -432,7 +432,7 @@ irqreturn_t mhi_irq_handler(int irq_numb
struct mhi_event_ctxt *er_ctxt =
&mhi_cntrl->mhi_ctxt->er_ctxt[mhi_event->er_index];
struct mhi_ring *ev_ring = &mhi_event->ring;
- dma_addr_t ptr = er_ctxt->rp;
+ dma_addr_t ptr = le64_to_cpu(er_ctxt->rp);
void *dev_rp;
if (!is_valid_ring_ptr(ev_ring, ptr)) {
@@ -537,14 +537,14 @@ static void mhi_recycle_ev_ring_element(
/* Update the WP */
ring->wp += ring->el_size;
- ctxt_wp = *ring->ctxt_wp + ring->el_size;
+ ctxt_wp = le64_to_cpu(*ring->ctxt_wp) + ring->el_size;
if (ring->wp >= (ring->base + ring->len)) {
ring->wp = ring->base;
ctxt_wp = ring->iommu_base;
}
- *ring->ctxt_wp = ctxt_wp;
+ *ring->ctxt_wp = cpu_to_le64(ctxt_wp);
/* Update the RP */
ring->rp += ring->el_size;
@@ -801,7 +801,7 @@ int mhi_process_ctrl_ev_ring(struct mhi_
struct device *dev = &mhi_cntrl->mhi_dev->dev;
u32 chan;
int count = 0;
- dma_addr_t ptr = er_ctxt->rp;
+ dma_addr_t ptr = le64_to_cpu(er_ctxt->rp);
/*
* This is a quick check to avoid unnecessary event processing
@@ -940,7 +940,7 @@ int mhi_process_ctrl_ev_ring(struct mhi_
mhi_recycle_ev_ring_element(mhi_cntrl, ev_ring);
local_rp = ev_ring->rp;
- ptr = er_ctxt->rp;
+ ptr = le64_to_cpu(er_ctxt->rp);
if (!is_valid_ring_ptr(ev_ring, ptr)) {
dev_err(&mhi_cntrl->mhi_dev->dev,
"Event ring rp points outside of the event ring\n");
@@ -970,7 +970,7 @@ int mhi_process_data_event_ring(struct m
int count = 0;
u32 chan;
struct mhi_chan *mhi_chan;
- dma_addr_t ptr = er_ctxt->rp;
+ dma_addr_t ptr = le64_to_cpu(er_ctxt->rp);
if (unlikely(MHI_EVENT_ACCESS_INVALID(mhi_cntrl->pm_state)))
return -EIO;
@@ -1011,7 +1011,7 @@ int mhi_process_data_event_ring(struct m
mhi_recycle_ev_ring_element(mhi_cntrl, ev_ring);
local_rp = ev_ring->rp;
- ptr = er_ctxt->rp;
+ ptr = le64_to_cpu(er_ctxt->rp);
if (!is_valid_ring_ptr(ev_ring, ptr)) {
dev_err(&mhi_cntrl->mhi_dev->dev,
"Event ring rp points outside of the event ring\n");
@@ -1529,7 +1529,7 @@ static void mhi_mark_stale_events(struct
/* mark all stale events related to channel as STALE event */
spin_lock_irqsave(&mhi_event->lock, flags);
- ptr = er_ctxt->rp;
+ ptr = le64_to_cpu(er_ctxt->rp);
if (!is_valid_ring_ptr(ev_ring, ptr)) {
dev_err(&mhi_cntrl->mhi_dev->dev,
"Event ring rp points outside of the event ring\n");
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -218,7 +218,7 @@ int mhi_ready_state_transition(struct mh
continue;
ring->wp = ring->base + ring->len - ring->el_size;
- *ring->ctxt_wp = ring->iommu_base + ring->len - ring->el_size;
+ *ring->ctxt_wp = cpu_to_le64(ring->iommu_base + ring->len - ring->el_size);
/* Update all cores */
smp_wmb();
@@ -420,7 +420,7 @@ static int mhi_pm_mission_mode_transitio
continue;
ring->wp = ring->base + ring->len - ring->el_size;
- *ring->ctxt_wp = ring->iommu_base + ring->len - ring->el_size;
+ *ring->ctxt_wp = cpu_to_le64(ring->iommu_base + ring->len - ring->el_size);
/* Update to all cores */
smp_wmb();
From: Marc Kleine-Budde <[email protected]>
commit 2e8e79c416aae1de224c0f1860f2e3350fa171f8 upstream.
can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.
Fixes: 80646733f11c ("can: m_can: update to support CAN FD features")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Reported-by: Hangyu Hua <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/m_can/m_can.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1640,8 +1640,6 @@ static netdev_tx_t m_can_tx_handler(stru
if (err)
goto out_fail;
- can_put_echo_skb(skb, dev, 0, 0);
-
if (cdev->can.ctrlmode & CAN_CTRLMODE_FD) {
cccr = m_can_read(cdev, M_CAN_CCCR);
cccr &= ~CCCR_CMR_MASK;
@@ -1658,6 +1656,9 @@ static netdev_tx_t m_can_tx_handler(stru
m_can_write(cdev, M_CAN_CCCR, cccr);
}
m_can_write(cdev, M_CAN_TXBTIE, 0x1);
+
+ can_put_echo_skb(skb, dev, 0, 0);
+
m_can_write(cdev, M_CAN_TXBAR, 0x1);
/* End of xmit function for version 3.0.x */
} else {
From: James Clark <[email protected]>
commit ea75a342aed5ed72c87f38fbe0df2f5df7eae374 upstream.
It's impossible to program a valid value for TRCCONFIGR.QE
when TRCIDR0.QSUPP==0b10. In that case the following is true:
Q element support is implemented, and only supports Q elements without
instruction counts. TRCCONFIGR.QE can only take the values 0b00 or 0b11.
Currently the low bit of QSUPP is checked to see if the low bit of QE can
be written to, but as you can see when QSUPP==0b10 the low bit is cleared
making it impossible to ever write the only valid value of 0b11 to QE.
0b10 would be written instead, which is a reserved QE value even for all
values of QSUPP.
The fix is to allow writing the low bit of QE for any non zero value of
QSUPP.
This change also ensures that the low bit is always set, even when the
user attempts to only set the high bit.
Signed-off-by: James Clark <[email protected]>
Reviewed-by: Mike Leach <[email protected]>
Fixes: d8c66962084f ("coresight-etm4x: Controls pertaining to the reset, mode, pe and events")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -367,8 +367,12 @@ static ssize_t mode_store(struct device
mode = ETM_MODE_QELEM(config->mode);
/* start by clearing QE bits */
config->cfg &= ~(BIT(13) | BIT(14));
- /* if supported, Q elements with instruction counts are enabled */
- if ((mode & BIT(0)) && (drvdata->q_support & BIT(0)))
+ /*
+ * if supported, Q elements with instruction counts are enabled.
+ * Always set the low bit for any requested mode. Valid combos are
+ * 0b00, 0b01 and 0b11.
+ */
+ if (mode && drvdata->q_support)
config->cfg |= BIT(13);
/*
* if supported, Q elements with and without instruction
From: Fabio Estevam <[email protected]>
commit f81f095e87715e198471f4653952fe5e3f824874 upstream.
The intention of commit 886a9c134755 ("PCI: dwc: Move link handling into
common code") was to standardize the behavior of link down as explained
in its commit log:
"The behavior for a link down was inconsistent as some drivers would fail
probe in that case while others succeed. Let's standardize this to
succeed as there are usecases where devices (and the link) appear later
even without hotplug. For example, a reconfigured FPGA device."
The pci-imx6 still fails to probe when the link is not present, which
causes the following warning:
imx6q-pcie 8ffc000.pcie: Phy link never came up
imx6q-pcie: probe of 8ffc000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 0 PID: 30 at drivers/regulator/core.c:2257 _regulator_put.part.0+0x1b8/0x1dc
Modules linked in:
CPU: 0 PID: 30 Comm: kworker/u2:2 Not tainted 5.15.0-next-20211103 #1
Hardware name: Freescale i.MX6 SoloX (Device Tree)
Workqueue: events_unbound async_run_entry_fn
[<c0111730>] (unwind_backtrace) from [<c010bb74>] (show_stack+0x10/0x14)
[<c010bb74>] (show_stack) from [<c0f90290>] (dump_stack_lvl+0x58/0x70)
[<c0f90290>] (dump_stack_lvl) from [<c012631c>] (__warn+0xd4/0x154)
[<c012631c>] (__warn) from [<c0f87b00>] (warn_slowpath_fmt+0x74/0xa8)
[<c0f87b00>] (warn_slowpath_fmt) from [<c076b4bc>] (_regulator_put.part.0+0x1b8/0x1dc)
[<c076b4bc>] (_regulator_put.part.0) from [<c076b574>] (regulator_put+0x2c/0x3c)
[<c076b574>] (regulator_put) from [<c08c3740>] (release_nodes+0x50/0x178)
Fix this problem by ignoring the dw_pcie_wait_for_link() error like
it is done on the other dwc drivers.
Tested on imx6sx-sdb and imx6q-sabresd boards.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 886a9c134755 ("PCI: dwc: Move link handling into common code")
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Richard Zhu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -779,9 +779,7 @@ static int imx6_pcie_start_link(struct d
/* Start LTSSM. */
imx6_pcie_ltssm_enable(dev);
- ret = dw_pcie_wait_for_link(pci);
- if (ret)
- goto err_reset_phy;
+ dw_pcie_wait_for_link(pci);
if (pci->link_gen == 2) {
/* Allow Gen2 mode after the link is up. */
@@ -817,11 +815,7 @@ static int imx6_pcie_start_link(struct d
}
/* Make sure link training is finished as well! */
- ret = dw_pcie_wait_for_link(pci);
- if (ret) {
- dev_err(dev, "Failed to bring link up!\n");
- goto err_reset_phy;
- }
+ dw_pcie_wait_for_link(pci);
} else {
dev_info(dev, "Link: Gen2 disabled\n");
}
From: Eric Biggers <[email protected]>
commit a24611ea356c7f3f0ec926da11b9482ac1f414fd upstream.
Before checking whether the expected digest_info is present, we need to
check that there are enough bytes remaining.
Fixes: a49de377e051 ("crypto: Add hash param to pkcs1pad")
Cc: <[email protected]> # v4.6+
Cc: Tadeusz Struk <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa-pkcs1pad.c | 2 ++
1 file changed, 2 insertions(+)
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -476,6 +476,8 @@ static int pkcs1pad_verify_complete(stru
pos++;
if (digest_info) {
+ if (digest_info->size > dst_len - pos)
+ goto done;
if (crypto_memneq(out_buf + pos, digest_info->data,
digest_info->size))
goto done;
From: Mark Rutland <[email protected]>
[ Upstream commit 614c0b9fee711dd89b1dd65c88ba83612a373fdc ]
We may call arm64_apply_bp_hardening() early during entry (e.g. in
el0_ia()) before it is safe to run instrumented code. Unfortunately this
may result in running instrumented code in two cases:
* The hardening callbacks called by arm64_apply_bp_hardening() are not
marked as `noinstr`, and have been observed to be instrumented when
compiled with either GCC or LLVM.
* Since arm64_apply_bp_hardening() itself is only marked as `inline`
rather than `__always_inline`, it is possible that the compiler
decides to place it out-of-line, whereupon it may be instrumented.
For example, with defconfig built with clang 13.0.0,
call_hvc_arch_workaround_1() is compiled as:
| <call_hvc_arch_workaround_1>:
| d503233f paciasp
| f81f0ffe str x30, [sp, #-16]!
| 320183e0 mov w0, #0x80008000
| d503201f nop
| d4000002 hvc #0x0
| f84107fe ldr x30, [sp], #16
| d50323bf autiasp
| d65f03c0 ret
... but when CONFIG_FTRACE=y and CONFIG_KCOV=y this is compiled as:
| <call_hvc_arch_workaround_1>:
| d503245f bti c
| d503201f nop
| d503201f nop
| d503233f paciasp
| a9bf7bfd stp x29, x30, [sp, #-16]!
| 910003fd mov x29, sp
| 94000000 bl 0 <__sanitizer_cov_trace_pc>
| 320183e0 mov w0, #0x80008000
| d503201f nop
| d4000002 hvc #0x0
| a8c17bfd ldp x29, x30, [sp], #16
| d50323bf autiasp
| d65f03c0 ret
... with a patchable function entry registered with ftrace, and a direct
call to __sanitizer_cov_trace_pc(). Neither of these are safe early
during entry sequences.
This patch avoids the unsafe instrumentation by marking
arm64_apply_bp_hardening() as `__always_inline` and by marking the
hardening functions as `noinstr`. This avoids the potential for
instrumentation, and causes clang to consistently generate the function
as with the defconfig sample.
Note: in the defconfig compilation, when CONFIG_SVE=y, x30 is spilled to
the stack without being placed in a frame record, which will result in a
missing entry if call_hvc_arch_workaround_1() is backtraced. Similar is
true of qcom_link_stack_sanitisation(), where inline asm spills the LR
to a GPR prior to corrupting it. This is not a significant issue
presently as we will only backtrace here if an exception is taken, and
in such cases we may omit entries for other reasons today.
The relevant hardening functions were introduced in commits:
ec82b567a74fbdff ("arm64: Implement branch predictor hardening for Falkor")
b092201e00206141 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
... and these were subsequently moved in commit:
d4647f0a2ad71110 ("arm64: Rewrite Spectre-v2 mitigation code")
The arm64_apply_bp_hardening() function was introduced in commit:
0f15adbb2861ce6f ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
... and was subsequently moved and reworked in commit:
6279017e807708a0 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Fixes: ec82b567a74fbdff ("arm64: Implement branch predictor hardening for Falkor")
Fixes: b092201e00206141 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Fixes: d4647f0a2ad71110 ("arm64: Rewrite Spectre-v2 mitigation code")
Fixes: 0f15adbb2861ce6f ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
Fixes: 6279017e807708a0 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: James Morse <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Will Deacon <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/spectre.h | 3 ++-
arch/arm64/kernel/proton-pack.c | 9 ++++++---
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h
index 86e0cc9b9c68..aa3d3607d5c8 100644
--- a/arch/arm64/include/asm/spectre.h
+++ b/arch/arm64/include/asm/spectre.h
@@ -67,7 +67,8 @@ struct bp_hardening_data {
DECLARE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data);
-static inline void arm64_apply_bp_hardening(void)
+/* Called during entry so must be __always_inline */
+static __always_inline void arm64_apply_bp_hardening(void)
{
struct bp_hardening_data *d;
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
index 6d45c63c6454..5777929d35bf 100644
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -233,17 +233,20 @@ static void install_bp_hardening_cb(bp_hardening_cb_t fn)
__this_cpu_write(bp_hardening_data.slot, HYP_VECTOR_SPECTRE_DIRECT);
}
-static void call_smc_arch_workaround_1(void)
+/* Called during entry so must be noinstr */
+static noinstr void call_smc_arch_workaround_1(void)
{
arm_smccc_1_1_smc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
}
-static void call_hvc_arch_workaround_1(void)
+/* Called during entry so must be noinstr */
+static noinstr void call_hvc_arch_workaround_1(void)
{
arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
}
-static void qcom_link_stack_sanitisation(void)
+/* Called during entry so must be noinstr */
+static noinstr void qcom_link_stack_sanitisation(void)
{
u64 tmp;
--
2.34.1
From: Jann Horn <[email protected]>
commit ee1fee900537b5d9560e9f937402de5ddc8412f3 upstream.
Setting PTRACE_O_SUSPEND_SECCOMP is supposed to be a highly privileged
operation because it allows the tracee to completely bypass all seccomp
filters on kernels with CONFIG_CHECKPOINT_RESTORE=y. It is only supposed to
be settable by a process with global CAP_SYS_ADMIN, and only if that
process is not subject to any seccomp filters at all.
However, while these permission checks were done on the PTRACE_SETOPTIONS
path, they were missing on the PTRACE_SEIZE path, which also sets
user-specified ptrace flags.
Move the permissions checks out into a helper function and let both
ptrace_attach() and ptrace_setoptions() call it.
Cc: [email protected]
Fixes: 13c4a90119d2 ("seccomp: add ptrace options for suspend/resume")
Signed-off-by: Jann Horn <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/ptrace.c | 47 ++++++++++++++++++++++++++++++++---------------
1 file changed, 32 insertions(+), 15 deletions(-)
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -371,6 +371,26 @@ bool ptrace_may_access(struct task_struc
return !err;
}
+static int check_ptrace_options(unsigned long data)
+{
+ if (data & ~(unsigned long)PTRACE_O_MASK)
+ return -EINVAL;
+
+ if (unlikely(data & PTRACE_O_SUSPEND_SECCOMP)) {
+ if (!IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) ||
+ !IS_ENABLED(CONFIG_SECCOMP))
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (seccomp_mode(¤t->seccomp) != SECCOMP_MODE_DISABLED ||
+ current->ptrace & PT_SUSPEND_SECCOMP)
+ return -EPERM;
+ }
+ return 0;
+}
+
static int ptrace_attach(struct task_struct *task, long request,
unsigned long addr,
unsigned long flags)
@@ -382,8 +402,16 @@ static int ptrace_attach(struct task_str
if (seize) {
if (addr != 0)
goto out;
+ /*
+ * This duplicates the check in check_ptrace_options() because
+ * ptrace_attach() and ptrace_setoptions() have historically
+ * used different error codes for unknown ptrace options.
+ */
if (flags & ~(unsigned long)PTRACE_O_MASK)
goto out;
+ retval = check_ptrace_options(flags);
+ if (retval)
+ return retval;
flags = PT_PTRACED | PT_SEIZED | (flags << PT_OPT_FLAG_SHIFT);
} else {
flags = PT_PTRACED;
@@ -656,22 +684,11 @@ int ptrace_writedata(struct task_struct
static int ptrace_setoptions(struct task_struct *child, unsigned long data)
{
unsigned flags;
+ int ret;
- if (data & ~(unsigned long)PTRACE_O_MASK)
- return -EINVAL;
-
- if (unlikely(data & PTRACE_O_SUSPEND_SECCOMP)) {
- if (!IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) ||
- !IS_ENABLED(CONFIG_SECCOMP))
- return -EINVAL;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (seccomp_mode(¤t->seccomp) != SECCOMP_MODE_DISABLED ||
- current->ptrace & PT_SUSPEND_SECCOMP)
- return -EPERM;
- }
+ ret = check_ptrace_options(data);
+ if (ret)
+ return ret;
/* Avoid intermediate state when all opts are cleared */
flags = child->ptrace;
From: Kai Ye <[email protected]>
[ Upstream commit 0a2a464f863187f97e96ebc6384c052cafd4a54c ]
Due to the subreq pointer misuse the private context memory. The aead
soft crypto occasionally casues the OS panic as setting the 64K page.
Here is fix it.
Fixes: 6c46a3297bea ("crypto: hisilicon/sec - add fallback tfm...")
Signed-off-by: Kai Ye <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/hisilicon/sec2/sec_crypto.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index 6a45bd23b363..090920ed50c8 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -2284,9 +2284,10 @@ static int sec_aead_soft_crypto(struct sec_ctx *ctx,
struct aead_request *aead_req,
bool encrypt)
{
- struct aead_request *subreq = aead_request_ctx(aead_req);
struct sec_auth_ctx *a_ctx = &ctx->a_ctx;
struct device *dev = ctx->dev;
+ struct aead_request *subreq;
+ int ret;
/* Kunpeng920 aead mode not support input 0 size */
if (!a_ctx->fallback_aead_tfm) {
@@ -2294,6 +2295,10 @@ static int sec_aead_soft_crypto(struct sec_ctx *ctx,
return -EINVAL;
}
+ subreq = aead_request_alloc(a_ctx->fallback_aead_tfm, GFP_KERNEL);
+ if (!subreq)
+ return -ENOMEM;
+
aead_request_set_tfm(subreq, a_ctx->fallback_aead_tfm);
aead_request_set_callback(subreq, aead_req->base.flags,
aead_req->base.complete, aead_req->base.data);
@@ -2301,8 +2306,13 @@ static int sec_aead_soft_crypto(struct sec_ctx *ctx,
aead_req->cryptlen, aead_req->iv);
aead_request_set_ad(subreq, aead_req->assoclen);
- return encrypt ? crypto_aead_encrypt(subreq) :
- crypto_aead_decrypt(subreq);
+ if (encrypt)
+ ret = crypto_aead_encrypt(subreq);
+ else
+ ret = crypto_aead_decrypt(subreq);
+ aead_request_free(subreq);
+
+ return ret;
}
static int sec_aead_crypto(struct aead_request *a_req, bool encrypt)
--
2.34.1
From: Jianyong Wu <[email protected]>
[ Upstream commit ee017ee353506fcec58e481673e4331ff198a80e ]
The 'fixmap' is a global resource and is used recursively by
create pud mapping(), leading to a potential race condition in the
presence of a concurrent call to alloc_init_pud():
kernel_init thread virtio-mem workqueue thread
================== ===========================
alloc_init_pud(...) alloc_init_pud(...)
pudp = pud_set_fixmap_offset(...) pudp = pud_set_fixmap_offset(...)
READ_ONCE(*pudp)
pud_clear_fixmap(...)
READ_ONCE(*pudp) // CRASH!
As kernel may sleep during creating pud mapping, introduce a mutex lock to
serialise use of the fixmap entries by alloc_init_pud(). However, there is
no need for locking in early boot stage and it doesn't work well with
KASLR enabled when early boot. So, enable lock when system_state doesn't
equal to "SYSTEM_BOOTING".
Signed-off-by: Jianyong Wu <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Fixes: f4710445458c ("arm64: mm: use fixmap when creating page tables")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/mm/mmu.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 9d0380631690..03aa6bee7dae 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -63,6 +63,7 @@ static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
static DEFINE_SPINLOCK(swapper_pgdir_lock);
+static DEFINE_MUTEX(fixmap_lock);
void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd)
{
@@ -328,6 +329,12 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
}
BUG_ON(p4d_bad(p4d));
+ /*
+ * No need for locking during early boot. And it doesn't work as
+ * expected with KASLR enabled.
+ */
+ if (system_state != SYSTEM_BOOTING)
+ mutex_lock(&fixmap_lock);
pudp = pud_set_fixmap_offset(p4dp, addr);
do {
pud_t old_pud = READ_ONCE(*pudp);
@@ -358,6 +365,8 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
} while (pudp++, addr = next, addr != end);
pud_clear_fixmap();
+ if (system_state != SYSTEM_BOOTING)
+ mutex_unlock(&fixmap_lock);
}
static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
--
2.34.1
From: Chengming Zhou <[email protected]>
[ Upstream commit f122d103b564e5fb7c82de902c6f8f6cbdf50ec9 ]
Don't need to do blkg_iostat_set for top blkg iostat on each CPU,
so move it after percpu stat aggregation.
Fixes: ef45fe470e1e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Signed-off-by: Chengming Zhou <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-cgroup.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 0eec59e4df65..07a2524e6efd 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -855,11 +855,11 @@ static void blkcg_fill_root_iostats(void)
blk_queue_root_blkg(bdev->bd_disk->queue);
struct blkg_iostat tmp;
int cpu;
+ unsigned long flags;
memset(&tmp, 0, sizeof(tmp));
for_each_possible_cpu(cpu) {
struct disk_stats *cpu_dkstats;
- unsigned long flags;
cpu_dkstats = per_cpu_ptr(bdev->bd_stats, cpu);
tmp.ios[BLKG_IOSTAT_READ] +=
@@ -875,11 +875,11 @@ static void blkcg_fill_root_iostats(void)
cpu_dkstats->sectors[STAT_WRITE] << 9;
tmp.bytes[BLKG_IOSTAT_DISCARD] +=
cpu_dkstats->sectors[STAT_DISCARD] << 9;
-
- flags = u64_stats_update_begin_irqsave(&blkg->iostat.sync);
- blkg_iostat_set(&blkg->iostat.cur, &tmp);
- u64_stats_update_end_irqrestore(&blkg->iostat.sync, flags);
}
+
+ flags = u64_stats_update_begin_irqsave(&blkg->iostat.sync);
+ blkg_iostat_set(&blkg->iostat.cur, &tmp);
+ u64_stats_update_end_irqrestore(&blkg->iostat.sync, flags);
}
}
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit 241f5b67fb48def58643f279dfb8468bdd54b443 ]
vb2_dma_contig_set_max_seg_size need to have a size in parameter and not
a DMA_BIT_MASK().
While fixing this issue, also fix error handling of all DMA size
setting.
Reported-by: kernel test robot <[email protected]>
Fixes: d4ae3689226e5 ("media: zoran: device support only 32bit DMA address")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/zoran/zoran_card.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/zoran/zoran_card.c b/drivers/staging/media/zoran/zoran_card.c
index f259585b0689..c578ef3c32f5 100644
--- a/drivers/staging/media/zoran/zoran_card.c
+++ b/drivers/staging/media/zoran/zoran_card.c
@@ -1069,8 +1069,10 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err)
- return -ENODEV;
- vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
+ return err;
+ err = vb2_dma_contig_set_max_seg_size(&pdev->dev, U32_MAX);
+ if (err)
+ return err;
nr = zoran_num++;
if (nr >= BUZ_MAX) {
--
2.34.1
From: Max Filippov <[email protected]>
commit f406f2d03e07afc199dd8cf501f361dde6be8a69 upstream.
patch_text must invoke patch_text_stop_machine on all online CPUs, but
it calls stop_machine_cpuslocked with NULL cpumask. As a result only one
CPU runs patch_text_stop_machine potentially leaving stale icache
entries on other CPUs. Fix that by calling stop_machine_cpuslocked with
cpu_online_mask as the last argument.
Cc: [email protected]
Fixes: 64711f9a47d4 ("xtensa: implement jump_label support")
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/kernel/jump_label.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/xtensa/kernel/jump_label.c
+++ b/arch/xtensa/kernel/jump_label.c
@@ -61,7 +61,7 @@ static void patch_text(unsigned long add
.data = data,
};
stop_machine_cpuslocked(patch_text_stop_machine,
- &patch, NULL);
+ &patch, cpu_online_mask);
} else {
unsigned long flags;
From: Stanimir Varbanov <[email protected]>
commit 61b3317dd424a3488b6754d7ff8301944d9d17d7 upstream.
During encoder driver open controls are initialized via a call
to v4l2_ctrl_handler_setup which returns EINVAL error for
V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM v4l2 control. The control
default value is disabled and because of firmware limitations
8x8 transform cannot be disabled for the supported HIGH and
CONSTRAINED_HIGH profiles.
To fix the issue change the control default value to enabled
(this is fine because the firmware enables 8x8 transform for
high and constrained_high profiles by default). Also, correct
the checking of profile ids in s_ctrl from hfi to v4l2 ids.
cc: [email protected] # 5.15+
Fixes: bfee75f73c37 ("media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control")
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/qcom/venus/venc.c | 4 ++--
drivers/media/platform/qcom/venus/venc_ctrls.c | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/media/platform/qcom/venus/venc.c
+++ b/drivers/media/platform/qcom/venus/venc.c
@@ -604,8 +604,8 @@ static int venc_set_properties(struct ve
ptype = HFI_PROPERTY_PARAM_VENC_H264_TRANSFORM_8X8;
h264_transform.enable_type = 0;
- if (ctr->profile.h264 == HFI_H264_PROFILE_HIGH ||
- ctr->profile.h264 == HFI_H264_PROFILE_CONSTRAINED_HIGH)
+ if (ctr->profile.h264 == V4L2_MPEG_VIDEO_H264_PROFILE_HIGH ||
+ ctr->profile.h264 == V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH)
h264_transform.enable_type = ctr->h264_8x8_transform;
ret = hfi_session_set_property(inst, ptype, &h264_transform);
--- a/drivers/media/platform/qcom/venus/venc_ctrls.c
+++ b/drivers/media/platform/qcom/venus/venc_ctrls.c
@@ -320,8 +320,8 @@ static int venc_op_s_ctrl(struct v4l2_ct
ctr->intra_refresh_period = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:
- if (ctr->profile.h264 != HFI_H264_PROFILE_HIGH &&
- ctr->profile.h264 != HFI_H264_PROFILE_CONSTRAINED_HIGH)
+ if (ctr->profile.h264 != V4L2_MPEG_VIDEO_H264_PROFILE_HIGH &&
+ ctr->profile.h264 != V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH)
return -EINVAL;
/*
@@ -457,7 +457,7 @@ int venc_ctrl_init(struct venus_inst *in
V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP, 1, 51, 1, 1);
v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
- V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM, 0, 1, 1, 0);
+ V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM, 0, 1, 1, 1);
v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP, 1, 51, 1, 1);
From: Corentin Labbe <[email protected]>
[ Upstream commit f75a749b6d78aeae2ce90e14fcc4b7b3ba46126d ]
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c | 3 +++
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c | 3 +++
2 files changed, 6 insertions(+)
diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
index 54ae8d16e493..35e3cadccac2 100644
--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
@@ -11,6 +11,7 @@
* You could find a link for the datasheet in Documentation/arm/sunxi.rst
*/
+#include <linux/bottom_half.h>
#include <linux/crypto.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
@@ -283,7 +284,9 @@ static int sun8i_ce_cipher_run(struct crypto_engine *engine, void *areq)
flow = rctx->flow;
err = sun8i_ce_run_task(ce, flow, crypto_tfm_alg_name(breq->base.tfm));
+ local_bh_disable();
crypto_finalize_skcipher_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c
index 88194718a806..859b7522faaa 100644
--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c
+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c
@@ -9,6 +9,7 @@
*
* You could find the datasheet in Documentation/arm/sunxi.rst
*/
+#include <linux/bottom_half.h>
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
@@ -414,6 +415,8 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq)
theend:
kfree(buf);
kfree(result);
+ local_bh_disable();
crypto_finalize_hash_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
--
2.34.1
From: Qais Yousef <[email protected]>
[ Upstream commit d37aee9018e68b0d356195caefbb651910e0bbfa ]
iowait_boost signal is applied independently of util and doesn't take
into account uclamp settings of the rq. An io heavy task that is capped
by uclamp_max could still request higher frequency because
sugov_iowait_apply() doesn't clamp the boost via uclamp_rq_util_with()
like effective_cpu_util() does.
Make sure that iowait_boost honours uclamp requests by calling
uclamp_rq_util_with() when applying the boost.
Fixes: 982d9cdc22c9 ("sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks")
Signed-off-by: Qais Yousef <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/cpufreq_schedutil.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index e7af18857371..7f6bb37d3a2f 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -289,6 +289,7 @@ static void sugov_iowait_apply(struct sugov_cpu *sg_cpu, u64 time)
* into the same scale so we can compare.
*/
boost = (sg_cpu->iowait_boost * sg_cpu->max) >> SCHED_CAPACITY_SHIFT;
+ boost = uclamp_rq_util_with(cpu_rq(sg_cpu->cpu), boost, NULL);
if (sg_cpu->util < boost)
sg_cpu->util = boost;
}
--
2.34.1
From: Eric Biggers <[email protected]>
commit c51abd96837f600d8fd940b6ab8e2da578575504 upstream.
In many cases, keyctl_pkey_params_get_2() is validating the user buffer
lengths against the wrong algorithm properties. Fix it to check against
the correct properties.
Probably this wasn't noticed before because for all asymmetric keys of
the "public_key" subtype, max_data_size == max_sig_size == max_enc_size
== max_dec_size. However, this isn't necessarily true for the
"asym_tpm" subtype (it should be, but it's not strictly validated). Of
course, future key types could have different values as well.
Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: <[email protected]> # v4.20+
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/keyctl_pkey.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/security/keys/keyctl_pkey.c
+++ b/security/keys/keyctl_pkey.c
@@ -135,15 +135,23 @@ static int keyctl_pkey_params_get_2(cons
switch (op) {
case KEYCTL_PKEY_ENCRYPT:
+ if (uparams.in_len > info.max_dec_size ||
+ uparams.out_len > info.max_enc_size)
+ return -EINVAL;
+ break;
case KEYCTL_PKEY_DECRYPT:
if (uparams.in_len > info.max_enc_size ||
uparams.out_len > info.max_dec_size)
return -EINVAL;
break;
case KEYCTL_PKEY_SIGN:
+ if (uparams.in_len > info.max_data_size ||
+ uparams.out_len > info.max_sig_size)
+ return -EINVAL;
+ break;
case KEYCTL_PKEY_VERIFY:
- if (uparams.in_len > info.max_sig_size ||
- uparams.out_len > info.max_data_size)
+ if (uparams.in_len > info.max_data_size ||
+ uparams.in2_len > info.max_sig_size)
return -EINVAL;
break;
default:
@@ -151,7 +159,7 @@ static int keyctl_pkey_params_get_2(cons
}
params->in_len = uparams.in_len;
- params->out_len = uparams.out_len;
+ params->out_len = uparams.out_len; /* Note: same as in2_len */
return 0;
}
From: Daniel Thompson <[email protected]>
[ Upstream commit 8030cb9a55688c1339edd284d9d6ce5f9fc75160 ]
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of the irq. For "normal" kernels
(without forced threading) then, if there is no thread_fn, then
IRQF_ONESHOT is a nop.
In this case disabling forced threading is not appropriate for this driver
because it calls wake_up_all() and this API cannot be called from
no-thread interrupt handlers on PREEMPT_RT systems (deadlock risk, triggers
sleeping-while-atomic warnings).
Fix this by removing IRQF_ONESHOT.
Fixes: 2209481409b7 ("soc: qcom: Add AOSS QMP driver")
Signed-off-by: Daniel Thompson <[email protected]>
[bjorn: Added Fixes tag]
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/qcom_aoss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 536c3e4114fb..a0659cf27845 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -548,7 +548,7 @@ static int qmp_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- ret = devm_request_irq(&pdev->dev, irq, qmp_intr, IRQF_ONESHOT,
+ ret = devm_request_irq(&pdev->dev, irq, qmp_intr, 0,
"aoss-qmp", qmp);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request interrupt\n");
--
2.34.1
From: Drew Fustini <[email protected]>
[ Upstream commit bceaae3bac0ce27c549bb050336d8d08abc2ee54 ]
The existing fix for errata i940 causes a conflict for IPU2 which is
using timer 3 and 4. From arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi:
&ipu2 {
mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
ti,timers = <&timer3>;
ti,watchdog-timers = <&timer4>, <&timer9>;
};
The conflict was noticed when booting mainline on the BeagleBoard X15
which has a TI AM5728 SoC:
remoteproc remoteproc1: 55020000.ipu is available
remoteproc remoteproc1: powering up 55020000.ipu
remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4
omap-rproc 55020000.ipu: could not get timer platform device
omap-rproc 55020000.ipu: omap_rproc_enable_timers failed: -19
remoteproc remoteproc1: can't start rproc 55020000.ipu: -19
This change modifies the errata fix to instead use timer 15 and 16 which
resolves the timer conflict.
It does not appear to introduce any latency regression. Results from
cyclictest with original errata fix using dmtimer 3 and 4:
# cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
policy: fifo: loadavg: 0.02 0.03 0.05
T: 0 ( 1449) P:80 I:200 C: 800368 Min: 0 Act: 32 Avg: 22 Max: 128
T: 1 ( 1450) P:80 I:200 C: 800301 Min: 0 Act: 12 Avg: 23 Max: 70
The results after the change to dmtimer 15 and 16:
# cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
policy: fifo: loadavg: 0.36 0.19 0.07
T: 0 ( 1711) P:80 I:200 C: 759599 Min: 0 Act: 6 Avg: 22 Max: 108
T: 1 ( 1712) P:80 I:200 C: 759539 Min: 0 Act: 19 Avg: 23 Max: 79
Fixes: 25de4ce5ed02 ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940")
Link: https://lore.kernel.org/linux-omap/YfWsG0p6to3IJuvE@x1/
Suggested-by: Suman Anna <[email protected]>
Reviewed-by: Tony Lindgren <[email protected]>
Signed-off-by: Drew Fustini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/dra7-l4.dtsi | 5 ++---
arch/arm/boot/dts/dra7.dtsi | 8 ++++----
drivers/clocksource/timer-ti-dm-systimer.c | 4 ++--
3 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 956a26d52a4c..0a11bacffc1f 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3482,8 +3482,7 @@
ti,timer-pwm;
};
};
-
- target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
+ timer15_target: target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x2c000 0x4>,
<0x2c010 0x4>;
@@ -3511,7 +3510,7 @@
};
};
- target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
+ timer16_target: target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index dfc1ef8ef6ae..61a3fb3e2a2f 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1320,20 +1320,20 @@
};
/* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
- assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
assigned-clock-parents = <&timer_sys_clk_div>;
};
};
-&timer4_target {
+&timer16_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
- assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
assigned-clock-parents = <&timer_sys_clk_div>;
};
};
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 1fccb457fcc5..2737407ff069 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -694,9 +694,9 @@ static int __init dmtimer_percpu_quirk_init(struct device_node *np, u32 pa)
return 0;
}
- if (pa == 0x48034000) /* dra7 dmtimer3 */
+ if (pa == 0x4882c000) /* dra7 dmtimer15 */
return dmtimer_percpu_timer_init(np, 0);
- else if (pa == 0x48036000) /* dra7 dmtimer4 */
+ else if (pa == 0x4882e000) /* dra7 dmtimer16 */
return dmtimer_percpu_timer_init(np, 1);
return 0;
--
2.34.1
From: Aidan MacDonald <[email protected]>
commit 9279c00fa40250e5cb23a8423dce7dbc6516a0ea upstream.
The X series Ingenic SoCs have a shadow GPIO group which is at a higher
offset than the other groups, and is used for all GPIO configuration.
The regmap did not take this offset into account and set max_register
too low, so the regmap API blocked writes to the shadow group, which
made the pinctrl driver unable to configure any pins.
Fix this by adding regmap access tables to the chip info. The way that
max_register was computed was also off by one, since max_register is an
inclusive bound, not an exclusive bound; this has been fixed.
Cc: [email protected]
Signed-off-by: Aidan MacDonald <[email protected]>
Fixes: 6626a76ef857 ("pinctrl: ingenic: Add .max_register in regmap_config")
Reviewed-by: Paul Cercueil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/pinctrl-ingenic.c | 46 +++++++++++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -119,6 +119,8 @@ struct ingenic_chip_info {
unsigned int num_functions;
const u32 *pull_ups, *pull_downs;
+
+ const struct regmap_access_table *access_table;
};
struct ingenic_pinctrl {
@@ -2179,6 +2181,17 @@ static const struct function_desc x1000_
{ "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
};
+static const struct regmap_range x1000_access_ranges[] = {
+ regmap_reg_range(0x000, 0x400 - 4),
+ regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X1500 */
+static const struct regmap_access_table x1000_access_table = {
+ .yes_ranges = x1000_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
+};
+
static const struct ingenic_chip_info x1000_chip_info = {
.num_chips = 4,
.reg_offset = 0x100,
@@ -2189,6 +2202,7 @@ static const struct ingenic_chip_info x1
.num_functions = ARRAY_SIZE(x1000_functions),
.pull_ups = x1000_pull_ups,
.pull_downs = x1000_pull_downs,
+ .access_table = &x1000_access_table,
};
static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
@@ -2300,6 +2314,7 @@ static const struct ingenic_chip_info x1
.num_functions = ARRAY_SIZE(x1500_functions),
.pull_ups = x1000_pull_ups,
.pull_downs = x1000_pull_downs,
+ .access_table = &x1000_access_table,
};
static const u32 x1830_pull_ups[4] = {
@@ -2506,6 +2521,16 @@ static const struct function_desc x1830_
{ "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
};
+static const struct regmap_range x1830_access_ranges[] = {
+ regmap_reg_range(0x0000, 0x4000 - 4),
+ regmap_reg_range(0x7000, 0x8000 - 4),
+};
+
+static const struct regmap_access_table x1830_access_table = {
+ .yes_ranges = x1830_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
+};
+
static const struct ingenic_chip_info x1830_chip_info = {
.num_chips = 4,
.reg_offset = 0x1000,
@@ -2516,6 +2541,7 @@ static const struct ingenic_chip_info x1
.num_functions = ARRAY_SIZE(x1830_functions),
.pull_ups = x1830_pull_ups,
.pull_downs = x1830_pull_downs,
+ .access_table = &x1830_access_table,
};
static const u32 x2000_pull_ups[5] = {
@@ -2969,6 +2995,17 @@ static const struct function_desc x2000_
{ "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
};
+static const struct regmap_range x2000_access_ranges[] = {
+ regmap_reg_range(0x000, 0x500 - 4),
+ regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X2100 */
+static const struct regmap_access_table x2000_access_table = {
+ .yes_ranges = x2000_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
+};
+
static const struct ingenic_chip_info x2000_chip_info = {
.num_chips = 5,
.reg_offset = 0x100,
@@ -2979,6 +3016,7 @@ static const struct ingenic_chip_info x2
.num_functions = ARRAY_SIZE(x2000_functions),
.pull_ups = x2000_pull_ups,
.pull_downs = x2000_pull_downs,
+ .access_table = &x2000_access_table,
};
static const u32 x2100_pull_ups[5] = {
@@ -3189,6 +3227,7 @@ static const struct ingenic_chip_info x2
.num_functions = ARRAY_SIZE(x2100_functions),
.pull_ups = x2100_pull_ups,
.pull_downs = x2100_pull_downs,
+ .access_table = &x2000_access_table,
};
static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
@@ -4168,7 +4207,12 @@ static int __init ingenic_pinctrl_probe(
return PTR_ERR(base);
regmap_config = ingenic_pinctrl_regmap_config;
- regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset;
+ if (chip_info->access_table) {
+ regmap_config.rd_table = chip_info->access_table;
+ regmap_config.wr_table = chip_info->access_table;
+ } else {
+ regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset - 4;
+ }
jzpc->map = devm_regmap_init_mmio(dev, base, ®map_config);
if (IS_ERR(jzpc->map)) {
From: NeilBrown <[email protected]>
commit 3848e96edf4788f772d83990022fa7023a233d83 upstream.
xprt_destory() claims XPRT_LOCKED and then calls del_timer_sync().
Both xprt_unlock_connect() and xprt_release() call
->release_xprt()
which drops XPRT_LOCKED and *then* xprt_schedule_autodisconnect()
which calls mod_timer().
This may result in mod_timer() being called *after* del_timer_sync().
When this happens, the timer may fire long after the xprt has been freed,
and run_timer_softirq() will probably crash.
The pairing of ->release_xprt() and xprt_schedule_autodisconnect() is
always called under ->transport_lock. So if we take ->transport_lock to
call del_timer_sync(), we can be sure that mod_timer() will run first
(if it runs at all).
Cc: [email protected]
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/xprt.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -2111,7 +2111,14 @@ static void xprt_destroy(struct rpc_xprt
*/
wait_on_bit_lock(&xprt->state, XPRT_LOCKED, TASK_UNINTERRUPTIBLE);
+ /*
+ * xprt_schedule_autodisconnect() can run after XPRT_LOCKED
+ * is cleared. We use ->transport_lock to ensure the mod_timer()
+ * can only run *before* del_time_sync(), never after.
+ */
+ spin_lock(&xprt->transport_lock);
del_timer_sync(&xprt->timer);
+ spin_unlock(&xprt->transport_lock);
/*
* Destroy sockets etc from the system workqueue so they can
From: Damien Le Moal <[email protected]>
commit 8454563e4c2aafbfb81a383ab423ea8b9b430a25 upstream.
To detect for the DMA_NONE (no data transfer) DMA direction,
sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA. This
test does not include the ATA_CMD_NCQ_NON_DATA command as this command
protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and
not as ATA_PROT_NODATA.
To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA
direction, use "!ata_is_data()".
Link: https://lore.kernel.org/r/[email protected]
Fixes: 176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA")
Cc: [email protected]
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_ata.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -197,7 +197,7 @@ static unsigned int sas_ata_qc_issue(str
task->total_xfer_len = qc->nbytes;
task->num_scatter = qc->n_elem;
task->data_dir = qc->dma_dir;
- } else if (qc->tf.protocol == ATA_PROT_NODATA) {
+ } else if (!ata_is_data(qc->tf.protocol)) {
task->data_dir = DMA_NONE;
} else {
for_each_sg(qc->sg, sg, qc->n_elem, si)
From: Ondrej Zary <[email protected]>
[ Upstream commit ef058cc8b7193d15a771272359c7454839ae74ee ]
Commit 2161536516ed ("media: media/pci: set device_caps in struct video_device")
introduced a regression: V4L2_CAP_TUNER is always present in device_caps,
even when the device has no tuner.
This causes a warning:
WARNING: CPU: 0 PID: 249 at drivers/media/v4l2-core/v4l2-ioctl.c:1102 v4l_querycap+0xa0/0xb0 [videodev]
Fixes: 2161536516ed ("media: media/pci: set device_caps in struct video_device")
Signed-off-by: Ondrej Zary <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/bt8xx/bttv-driver.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c
index 0e9df8b35ac6..661ebfa7bf3f 100644
--- a/drivers/media/pci/bt8xx/bttv-driver.c
+++ b/drivers/media/pci/bt8xx/bttv-driver.c
@@ -3890,7 +3890,7 @@ static int bttv_register_video(struct bttv *btv)
/* video */
vdev_init(btv, &btv->video_dev, &bttv_video_template, "video");
- btv->video_dev.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER |
+ btv->video_dev.device_caps = V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
if (btv->tuner_type != TUNER_ABSENT)
btv->video_dev.device_caps |= V4L2_CAP_TUNER;
@@ -3911,7 +3911,7 @@ static int bttv_register_video(struct bttv *btv)
/* vbi */
vdev_init(btv, &btv->vbi_dev, &bttv_video_template, "vbi");
btv->vbi_dev.device_caps = V4L2_CAP_VBI_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING | V4L2_CAP_TUNER;
+ V4L2_CAP_STREAMING;
if (btv->tuner_type != TUNER_ABSENT)
btv->vbi_dev.device_caps |= V4L2_CAP_TUNER;
--
2.34.1
From: David Hildenbrand <[email protected]>
[ Upstream commit 7ea0d2d79da09d1f7d71c96a9c9bc1b5229360b5 ]
If register_memory() fails, we freed the memory block but already added
the memory block to the group list, not good. Let's defer adding the
block to the memory group to after registering the memory block device.
We do handle it properly during unregister_memory(), but that's not
called when the registration fails.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 028fc57a1c36 ("drivers/base/memory: introduce "memory groups" to logically group memory blocks")
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/memory.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 365cd4a7f239..60c38f9cf1a7 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -663,14 +663,16 @@ static int init_memory_block(unsigned long block_id, unsigned long state,
mem->nr_vmemmap_pages = nr_vmemmap_pages;
INIT_LIST_HEAD(&mem->group_next);
+ ret = register_memory(mem);
+ if (ret)
+ return ret;
+
if (group) {
mem->group = group;
list_add(&mem->group_next, &group->memory_blocks);
}
- ret = register_memory(mem);
-
- return ret;
+ return 0;
}
static int add_memory_block(unsigned long base_section_nr)
--
2.34.1
From: Sam Protsenko <[email protected]>
[ Upstream commit 96f79935015cf3d7ca6fabf63cd13b8af45a7713 ]
GPIO_ALIVE and GPIO_CMGP blocks in Exynos850 SoC don't have EINT
capabilities (like EINT_SVC register), and there are no corresponding
interrupts wired to GIC. Instead those blocks have wake-up interrupts
for each pin. The ".eint_gpio_init" callbacks were specified by mistake
for these blocks, when porting pinctrl code from downstream kernel. That
leads to error messages like this:
samsung-pinctrl 11850000.pinctrl: irq number not available
Remove ".eint_gpio_init" for pinctrl_alive and pinctrl_gpmc to fix this
error. This change doesn't affect proper interrupt handling for related
pins, as all those pins are handled in ".eint_wkup_init".
Fixes: cdd3d945dcec ("pinctrl: samsung: Add Exynos850 SoC specific data")
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index fe5f6046fbd5..cc66f852ef7b 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -504,13 +504,11 @@ static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = {
/* pin-controller instance 0 ALIVE data */
.pin_banks = exynos850_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos850_pin_banks0),
- .eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
}, {
/* pin-controller instance 1 CMGP data */
.pin_banks = exynos850_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos850_pin_banks1),
- .eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
}, {
/* pin-controller instance 2 AUD data */
--
2.34.1
From: Muchun Song <[email protected]>
commit ae085d7f9365de7da27ab5c0d16b12d51ea7fca9 upstream.
The objcg is not cleared and put for kfence object when it is freed,
which could lead to memory leak for struct obj_cgroup and wrong
statistics of NR_SLAB_RECLAIMABLE_B or NR_SLAB_UNRECLAIMABLE_B.
Since the last freed object's objcg is not cleared,
mem_cgroup_from_obj() could return the wrong memcg when this kfence
object, which is not charged to any objcgs, is reallocated to other
users.
A real word issue [1] is caused by this bug.
Link: https://lore.kernel.org/all/[email protected]/ [1]
Reported-by: [email protected]
Fixes: d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Muchun Song <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slab.c | 1 +
1 file changed, 1 insertion(+)
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3429,6 +3429,7 @@ static __always_inline void __cache_free
if (is_kfence_address(objp)) {
kmemleak_free_recursive(objp, cachep->flags);
+ memcg_slab_free_hook(cachep, &objp, 1);
__kfence_free(objp);
return;
}
From: Takashi Iwai <[email protected]>
commit bc55cfd5718c7c23e5524582e9fa70b4d10f2433 upstream.
syzbot caught a potential deadlock between the PCM
runtime->buffer_mutex and the mm->mmap_lock. It was brought by the
recent fix to cover the racy read/write and other ioctls, and in that
commit, I overlooked a (hopefully only) corner case that may take the
revert lock, namely, the OSS mmap. The OSS mmap operation
exceptionally allows to re-configure the parameters inside the OSS
mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the
copy_from/to_user calls at read/write operations also take the
mm->mmap_lock internally, hence it may lead to a AB/BA deadlock.
A similar problem was already seen in the past and we fixed it with a
refcount (in commit b248371628aa). The former fix covered only the
call paths with OSS read/write and OSS ioctls, while we need to cover
the concurrent access via both ALSA and OSS APIs now.
This patch addresses the problem above by replacing the buffer_mutex
lock in the read/write operations with a refcount similar as we've
used for OSS. The new field, runtime->buffer_accessing, keeps the
number of concurrent read/write operations. Unlike the former
buffer_mutex protection, this protects only around the
copy_from/to_user() calls; the other codes are basically protected by
the PCM stream lock. The refcount can be a negative, meaning blocked
by the ioctls. If a negative value is seen, the read/write aborts
with -EBUSY. In the ioctl side, OTOH, they check this refcount, too,
and set to a negative value for blocking unless it's already being
accessed.
Reported-by: [email protected]
Fixes: dca947d4d26d ("ALSA: pcm: Fix races among concurrent read/write and buffer changes")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/sound/pcm.h | 1 +
sound/core/pcm.c | 1 +
sound/core/pcm_lib.c | 9 +++++----
sound/core/pcm_native.c | 39 ++++++++++++++++++++++++++++++++-------
4 files changed, 39 insertions(+), 11 deletions(-)
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -399,6 +399,7 @@ struct snd_pcm_runtime {
struct fasync_struct *fasync;
bool stop_operating; /* sync_stop will be called */
struct mutex buffer_mutex; /* protect for buffer changes */
+ atomic_t buffer_accessing; /* >0: in r/w operation, <0: blocked */
/* -- private section -- */
void *private_data;
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -970,6 +970,7 @@ int snd_pcm_attach_substream(struct snd_
runtime->status->state = SNDRV_PCM_STATE_OPEN;
mutex_init(&runtime->buffer_mutex);
+ atomic_set(&runtime->buffer_accessing, 0);
substream->runtime = runtime;
substream->private_data = pcm->private_data;
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1905,11 +1905,9 @@ static int wait_for_avail(struct snd_pcm
if (avail >= runtime->twake)
break;
snd_pcm_stream_unlock_irq(substream);
- mutex_unlock(&runtime->buffer_mutex);
tout = schedule_timeout(wait_time);
- mutex_lock(&runtime->buffer_mutex);
snd_pcm_stream_lock_irq(substream);
set_current_state(TASK_INTERRUPTIBLE);
switch (runtime->status->state) {
@@ -2203,7 +2201,6 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
nonblock = !!(substream->f_flags & O_NONBLOCK);
- mutex_lock(&runtime->buffer_mutex);
snd_pcm_stream_lock_irq(substream);
err = pcm_accessible_state(runtime);
if (err < 0)
@@ -2258,10 +2255,15 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
err = -EINVAL;
goto _end_unlock;
}
+ if (!atomic_inc_unless_negative(&runtime->buffer_accessing)) {
+ err = -EBUSY;
+ goto _end_unlock;
+ }
snd_pcm_stream_unlock_irq(substream);
err = writer(substream, appl_ofs, data, offset, frames,
transfer);
snd_pcm_stream_lock_irq(substream);
+ atomic_dec(&runtime->buffer_accessing);
if (err < 0)
goto _end_unlock;
err = pcm_accessible_state(runtime);
@@ -2291,7 +2293,6 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
if (xfer > 0 && err >= 0)
snd_pcm_update_state(substream, runtime);
snd_pcm_stream_unlock_irq(substream);
- mutex_unlock(&runtime->buffer_mutex);
return xfer > 0 ? (snd_pcm_sframes_t)xfer : err;
}
EXPORT_SYMBOL(__snd_pcm_lib_xfer);
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -672,6 +672,24 @@ static int snd_pcm_hw_params_choose(stru
return 0;
}
+/* acquire buffer_mutex; if it's in r/w operation, return -EBUSY, otherwise
+ * block the further r/w operations
+ */
+static int snd_pcm_buffer_access_lock(struct snd_pcm_runtime *runtime)
+{
+ if (!atomic_dec_unless_positive(&runtime->buffer_accessing))
+ return -EBUSY;
+ mutex_lock(&runtime->buffer_mutex);
+ return 0; /* keep buffer_mutex, unlocked by below */
+}
+
+/* release buffer_mutex and clear r/w access flag */
+static void snd_pcm_buffer_access_unlock(struct snd_pcm_runtime *runtime)
+{
+ mutex_unlock(&runtime->buffer_mutex);
+ atomic_inc(&runtime->buffer_accessing);
+}
+
#if IS_ENABLED(CONFIG_SND_PCM_OSS)
#define is_oss_stream(substream) ((substream)->oss.oss)
#else
@@ -682,14 +700,16 @@ static int snd_pcm_hw_params(struct snd_
struct snd_pcm_hw_params *params)
{
struct snd_pcm_runtime *runtime;
- int err = 0, usecs;
+ int err, usecs;
unsigned int bits;
snd_pcm_uframes_t frames;
if (PCM_RUNTIME_CHECK(substream))
return -ENXIO;
runtime = substream->runtime;
- mutex_lock(&runtime->buffer_mutex);
+ err = snd_pcm_buffer_access_lock(runtime);
+ if (err < 0)
+ return err;
snd_pcm_stream_lock_irq(substream);
switch (runtime->status->state) {
case SNDRV_PCM_STATE_OPEN:
@@ -807,7 +827,7 @@ static int snd_pcm_hw_params(struct snd_
snd_pcm_lib_free_pages(substream);
}
unlock:
- mutex_unlock(&runtime->buffer_mutex);
+ snd_pcm_buffer_access_unlock(runtime);
return err;
}
@@ -852,7 +872,9 @@ static int snd_pcm_hw_free(struct snd_pc
if (PCM_RUNTIME_CHECK(substream))
return -ENXIO;
runtime = substream->runtime;
- mutex_lock(&runtime->buffer_mutex);
+ result = snd_pcm_buffer_access_lock(runtime);
+ if (result < 0)
+ return result;
snd_pcm_stream_lock_irq(substream);
switch (runtime->status->state) {
case SNDRV_PCM_STATE_SETUP:
@@ -871,7 +893,7 @@ static int snd_pcm_hw_free(struct snd_pc
snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
cpu_latency_qos_remove_request(&substream->latency_pm_qos_req);
unlock:
- mutex_unlock(&runtime->buffer_mutex);
+ snd_pcm_buffer_access_unlock(runtime);
return result;
}
@@ -1356,12 +1378,15 @@ static int snd_pcm_action_nonatomic(cons
/* Guarantee the group members won't change during non-atomic action */
down_read(&snd_pcm_link_rwsem);
- mutex_lock(&substream->runtime->buffer_mutex);
+ res = snd_pcm_buffer_access_lock(substream->runtime);
+ if (res < 0)
+ goto unlock;
if (snd_pcm_stream_linked(substream))
res = snd_pcm_action_group(ops, substream, state, false);
else
res = snd_pcm_action_single(ops, substream, state);
- mutex_unlock(&substream->runtime->buffer_mutex);
+ snd_pcm_buffer_access_unlock(substream->runtime);
+ unlock:
up_read(&snd_pcm_link_rwsem);
return res;
}
From: Herbert Xu <[email protected]>
[ Upstream commit 66eae850333d639fc278d6f915c6fc01499ea893 ]
The function crypto_authenc_decrypt_tail discards its flags
argument and always relies on the flags from the original request
when starting its sub-request.
This is clearly wrong as it may cause the SLEEPABLE flag to be
set when it shouldn't.
Fixes: 92d95ba91772 ("crypto: authenc - Convert to new AEAD interface")
Reported-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/authenc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 670bf1a01d00..17f674a7cdff 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -253,7 +253,7 @@ static int crypto_authenc_decrypt_tail(struct aead_request *req,
dst = scatterwalk_ffwd(areq_ctx->dst, req->dst, req->assoclen);
skcipher_request_set_tfm(skreq, ctx->enc);
- skcipher_request_set_callback(skreq, aead_request_flags(req),
+ skcipher_request_set_callback(skreq, flags,
req->base.complete, req->base.data);
skcipher_request_set_crypt(skreq, src, dst,
req->cryptlen - authsize, req->iv);
--
2.34.1
From: Marco Elver <[email protected]>
[ Upstream commit efa90c11f62e6b7252fb75efe2787056872a627c ]
All supported versions of Clang perform auto-init of __builtin_alloca()
when stack auto-init is on (CONFIG_INIT_STACK_ALL_{ZERO,PATTERN}).
add_random_kstack_offset() uses __builtin_alloca() to add a stack
offset. This means, when CONFIG_INIT_STACK_ALL_{ZERO,PATTERN} is
enabled, add_random_kstack_offset() will auto-init that unused portion
of the stack used to add an offset.
There are several problems with this:
1. These offsets can be as large as 1023 bytes. Performing
memset() on them isn't exactly cheap, and this is done on
every syscall entry.
2. Architectures adding add_random_kstack_offset() to syscall
entry implemented in C require them to be 'noinstr' (e.g. see
x86 and s390). The potential problem here is that a call to
memset may occur, which is not noinstr.
A x86_64 defconfig kernel with Clang 11 and CONFIG_VMLINUX_VALIDATION shows:
| vmlinux.o: warning: objtool: do_syscall_64()+0x9d: call to memset() leaves .noinstr.text section
| vmlinux.o: warning: objtool: do_int80_syscall_32()+0xab: call to memset() leaves .noinstr.text section
| vmlinux.o: warning: objtool: __do_fast_syscall_32()+0xe2: call to memset() leaves .noinstr.text section
| vmlinux.o: warning: objtool: fixup_bad_iret()+0x2f: call to memset() leaves .noinstr.text section
Clang 14 (unreleased) will introduce a way to skip alloca initialization
via __builtin_alloca_uninitialized() (https://reviews.llvm.org/D115440).
Constrain RANDOMIZE_KSTACK_OFFSET to only be enabled if no stack
auto-init is enabled, the compiler is GCC, or Clang is version 14+. Use
__builtin_alloca_uninitialized() if the compiler provides it, as is done
by Clang 14.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall")
Signed-off-by: Marco Elver <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/Kconfig | 1 +
include/linux/randomize_kstack.h | 16 ++++++++++++++--
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig
index d1e69d6e8498..191589f26b1a 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -1141,6 +1141,7 @@ config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
config RANDOMIZE_KSTACK_OFFSET_DEFAULT
bool "Randomize kernel stack offset on syscall entry"
depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+ depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
help
The kernel stack offset can be randomized (after pt_regs) by
roughly 5 bits of entropy, frustrating memory corruption
diff --git a/include/linux/randomize_kstack.h b/include/linux/randomize_kstack.h
index bebc911161b6..d373f1bcbf7c 100644
--- a/include/linux/randomize_kstack.h
+++ b/include/linux/randomize_kstack.h
@@ -16,8 +16,20 @@ DECLARE_PER_CPU(u32, kstack_offset);
* alignment. Also, since this use is being explicitly masked to a max of
* 10 bits, stack-clash style attacks are unlikely. For more details see
* "VLAs" in Documentation/process/deprecated.rst
+ *
+ * The normal __builtin_alloca() is initialized with INIT_STACK_ALL (currently
+ * only with Clang and not GCC). Initializing the unused area on each syscall
+ * entry is expensive, and generating an implicit call to memset() may also be
+ * problematic (such as in noinstr functions). Therefore, if the compiler
+ * supports it (which it should if it initializes allocas), always use the
+ * "uninitialized" variant of the builtin.
*/
-void *__builtin_alloca(size_t size);
+#if __has_builtin(__builtin_alloca_uninitialized)
+#define __kstack_alloca __builtin_alloca_uninitialized
+#else
+#define __kstack_alloca __builtin_alloca
+#endif
+
/*
* Use, at most, 10 bits of entropy. We explicitly cap this to keep the
* "VLA" from being unbounded (see above). 10 bits leaves enough room for
@@ -36,7 +48,7 @@ void *__builtin_alloca(size_t size);
if (static_branch_maybe(CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT, \
&randomize_kstack_offset)) { \
u32 offset = raw_cpu_read(kstack_offset); \
- u8 *ptr = __builtin_alloca(KSTACK_OFFSET_MAX(offset)); \
+ u8 *ptr = __kstack_alloca(KSTACK_OFFSET_MAX(offset)); \
/* Keep allocation even after "ptr" loses scope. */ \
asm volatile("" :: "r"(ptr) : "memory"); \
} \
--
2.34.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit 7cd925a8823d16de5614d3f0aabea9948747accd ]
Move interrupts allocation from exynos4_timer_resources() into separate
function together with the interrupt number parsing code from
mct_init_dt(), so the code for managing interrupts is kept together.
While touching exynos4_timer_resources() function, move of_iomap() to it.
No functional changes.
Signed-off-by: Marek Szyprowski <[email protected]>
Reviewed-by: Chanwoo Choi <[email protected]>
Tested-by: Chanwoo Choi <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/exynos_mct.c | 50 +++++++++++++++++++-------------
1 file changed, 30 insertions(+), 20 deletions(-)
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 5e3e96d3d1b9..857cf12ebe57 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -504,11 +504,14 @@ static int exynos4_mct_dying_cpu(unsigned int cpu)
return 0;
}
-static int __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
+static int __init exynos4_timer_resources(struct device_node *np)
{
- int err, cpu;
struct clk *mct_clk, *tick_clk;
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: unable to ioremap mct address space\n", __func__);
+
tick_clk = of_clk_get_by_name(np, "fin_pll");
if (IS_ERR(tick_clk))
panic("%s: unable to determine tick clock rate\n", __func__);
@@ -519,9 +522,27 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
panic("%s: unable to retrieve mct clock instance\n", __func__);
clk_prepare_enable(mct_clk);
- reg_base = base;
- if (!reg_base)
- panic("%s: unable to ioremap mct address space\n", __func__);
+ return 0;
+}
+
+static int __init exynos4_timer_interrupts(struct device_node *np,
+ unsigned int int_type)
+{
+ int nr_irqs, i, err, cpu;
+
+ mct_int_type = int_type;
+
+ /* This driver uses only one global timer interrupt */
+ mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
+
+ /*
+ * Find out the number of local irqs specified. The local
+ * timer irqs are specified after the four global timer
+ * irqs are specified.
+ */
+ nr_irqs = of_irq_count(np);
+ for (i = MCT_L0_IRQ; i < nr_irqs; i++)
+ mct_irqs[i] = irq_of_parse_and_map(np, i);
if (mct_int_type == MCT_INT_PPI) {
@@ -581,24 +602,13 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
{
- u32 nr_irqs, i;
int ret;
- mct_int_type = int_type;
-
- /* This driver uses only one global timer interrupt */
- mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
-
- /*
- * Find out the number of local irqs specified. The local
- * timer irqs are specified after the four global timer
- * irqs are specified.
- */
- nr_irqs = of_irq_count(np);
- for (i = MCT_L0_IRQ; i < nr_irqs; i++)
- mct_irqs[i] = irq_of_parse_and_map(np, i);
+ ret = exynos4_timer_resources(np);
+ if (ret)
+ return ret;
- ret = exynos4_timer_resources(np, of_iomap(np, 0));
+ ret = exynos4_timer_interrupts(np, int_type);
if (ret)
return ret;
--
2.34.1
From: Ronnie Sahlberg <[email protected]>
commit 47178c7722ac528ea08aa82c3ef9ffa178962d7a upstream.
In multiuser each individual user has their own tcon structure for the
share and thus their own handle for a cached directory.
When we umount such a share we much make sure to release the pinned down dentry
for each such tcon and not just the master tcon.
Otherwise we will get nasty warnings on umount that dentries are still in use:
[ 3459.590047] BUG: Dentry 00000000115c6f41{i=12000000019d95,n=/} still in use\
(2) [unmount of cifs cifs]
...
[ 3459.590492] Call Trace:
[ 3459.590500] d_walk+0x61/0x2a0
[ 3459.590518] ? shrink_lock_dentry.part.0+0xe0/0xe0
[ 3459.590526] shrink_dcache_for_umount+0x49/0x110
[ 3459.590535] generic_shutdown_super+0x1a/0x110
[ 3459.590542] kill_anon_super+0x14/0x30
[ 3459.590549] cifs_kill_sb+0xf5/0x104 [cifs]
[ 3459.590773] deactivate_locked_super+0x36/0xa0
[ 3459.590782] cleanup_mnt+0x131/0x190
[ 3459.590789] task_work_run+0x5c/0x90
[ 3459.590798] exit_to_user_mode_loop+0x151/0x160
[ 3459.590809] exit_to_user_mode_prepare+0x83/0xd0
[ 3459.590818] syscall_exit_to_user_mode+0x12/0x30
[ 3459.590828] do_syscall_64+0x48/0x90
[ 3459.590833] entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Ronnie Sahlberg <[email protected]>
Acked-by: Paulo Alcantara (SUSE) <[email protected]>
Cc: [email protected]
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifsfs.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -254,6 +254,9 @@ static void cifs_kill_sb(struct super_bl
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
struct cifs_tcon *tcon;
struct cached_fid *cfid;
+ struct rb_root *root = &cifs_sb->tlink_tree;
+ struct rb_node *node;
+ struct tcon_link *tlink;
/*
* We ned to release all dentries for the cached directories
@@ -263,17 +266,21 @@ static void cifs_kill_sb(struct super_bl
dput(cifs_sb->root);
cifs_sb->root = NULL;
}
- tcon = cifs_sb_master_tcon(cifs_sb);
- if (tcon) {
+ spin_lock(&cifs_sb->tlink_tree_lock);
+ node = rb_first(root);
+ while (node != NULL) {
+ tlink = rb_entry(node, struct tcon_link, tl_rbnode);
+ tcon = tlink_tcon(tlink);
cfid = &tcon->crfid;
mutex_lock(&cfid->fid_mutex);
if (cfid->dentry) {
-
dput(cfid->dentry);
cfid->dentry = NULL;
}
mutex_unlock(&cfid->fid_mutex);
+ node = rb_next(node);
}
+ spin_unlock(&cifs_sb->tlink_tree_lock);
kill_anon_super(sb);
cifs_umount(cifs_sb);
From: Haimin Zhang <[email protected]>
[ Upstream commit 9a564bccb78a76740ea9d75a259942df8143d02c ]
Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
to initialize the buffer of supp_skb to fix a kernel-info-leak issue.
1) Function pfkey_register calls compose_sadb_supported to request
a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate
a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then
compose_sadb_supported treats the memory as a struct sadb_supported and
begins to initialize. But it just initializes the field sadb_supported_len
and field sadb_supported_exttype without field sadb_supported_reserved.
Reported-by: TCS Robot <[email protected]>
Signed-off-by: Haimin Zhang <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/key/af_key.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 9bf52a09b5ff..fd51db3be91c 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1699,7 +1699,7 @@ static int pfkey_register(struct sock *sk, struct sk_buff *skb, const struct sad
xfrm_probe_algs();
- supp_skb = compose_sadb_supported(hdr, GFP_KERNEL);
+ supp_skb = compose_sadb_supported(hdr, GFP_KERNEL | __GFP_ZERO);
if (!supp_skb) {
if (hdr->sadb_msg_satype != SADB_SATYPE_UNSPEC)
pfk->registered &= ~(1<<hdr->sadb_msg_satype);
--
2.34.1
From: Duoming Zhou <[email protected]>
commit efe4186e6a1b54bf38b9e05450d43b0da1fd7739 upstream.
When a 6pack device is detaching, the sixpack_close() will act to cleanup
necessary resources. Although del_timer_sync() in sixpack_close()
won't return if there is an active timer, one could use mod_timer() in
sp_xmit_on_air() to wake up timer again by calling userspace syscall such
as ax25_sendmsg(), ax25_connect() and ax25_ioctl().
This unexpected waked handler, sp_xmit_on_air(), realizes nothing about
the undergoing cleanup and may still call pty_write() to use driver layer
resources that have already been released.
One of the possible race conditions is shown below:
(USE) | (FREE)
ax25_sendmsg() |
ax25_queue_xmit() |
... |
sp_xmit() |
sp_encaps() | sixpack_close()
sp_xmit_on_air() | del_timer_sync(&sp->tx_t)
mod_timer(&sp->tx_t,...) | ...
| unregister_netdev()
| ...
(wait a while) | tty_release()
| tty_release_struct()
| release_tty()
sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE
pty_write(tty_struct) //USE | ...
The corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470
Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0
...
Call Trace:
...
queue_work_on+0x3f/0x50
pty_write+0xcd/0xe0pty_write+0xcd/0xe0
sp_xmit_on_air+0xb2/0x1f0
call_timer_fn+0x28/0x150
__run_timers.part.0+0x3c2/0x470
run_timer_softirq+0x3b/0x80
__do_softirq+0xf1/0x380
...
This patch reorders the del_timer_sync() after the unregister_netdev()
to avoid UAF bugs. Because the unregister_netdev() is well synchronized,
it flushs out any pending queues, waits the refcount of net_device
decreases to zero and removes net_device from kernel. There is not any
running routines after executing unregister_netdev(). Therefore, we could
not arouse timer from userspace again.
Signed-off-by: Duoming Zhou <[email protected]>
Reviewed-by: Lin Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/hamradio/6pack.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -669,14 +669,14 @@ static void sixpack_close(struct tty_str
*/
netif_stop_queue(sp->dev);
+ unregister_netdev(sp->dev);
+
del_timer_sync(&sp->tx_t);
del_timer_sync(&sp->resync_t);
/* Free all 6pack frame buffers. */
kfree(sp->rbuff);
kfree(sp->xbuff);
-
- unregister_netdev(sp->dev);
}
/* Perform I/O control on an active 6pack channel. */
From: Z. Liu <[email protected]>
[ Upstream commit 62d89a7d49afe46e6b9bbe9e23b004ad848dbde4 ]
Start from commit 11be60bd66d54 "matroxfb: add Matrox MGA-G200eW board
support", when maxvram is 0x800000, monitor become black w/ error message
said: "The current input timing is not supported by the monitor display.
Please change your input timing to 1920x1080@60Hz ...".
Fixes: 11be60bd66d5 ("matroxfb: add Matrox MGA-G200eW board support")
Signed-off-by: Z. Liu <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/matrox/matroxfb_base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index 5c82611e93d9..236521b19daf 100644
--- a/drivers/video/fbdev/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
@@ -1377,7 +1377,7 @@ static struct video_board vbG200 = {
.lowlevel = &matrox_G100
};
static struct video_board vbG200eW = {
- .maxvram = 0x800000,
+ .maxvram = 0x100000,
.maxdisplayable = 0x800000,
.accelID = FB_ACCEL_MATROX_MGAG200,
.lowlevel = &matrox_G100
--
2.34.1
From: Liguang Zhang <[email protected]>
commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream.
Writes to a Downstream Port's Slot Control register are PCIe hotplug
"commands." If the Port supports Command Completed events, software must
wait for a command to complete before writing to Slot Control again.
pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If
software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().
But when software notification is disabled, as it is when pcie_init()
powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
command completion, and it neglects to clear ctrl->cmd_busy, which leads to
spurious timeouts:
pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0 (issued 2264 msec ago)
pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0 (issued 2288 msec ago)
Clear ctrl->cmd_busy in pcie_poll_cmd() when it detects a Command Completed
event (PCI_EXP_SLTSTA_CC).
[bhelgaas: commit log]
Fixes: a5dd4b4b0570 ("PCI: pciehp: Wait for hotplug command completion where necessary")
Link: https://lore.kernel.org/r/[email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Liguang Zhang <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lukas Wunner <[email protected]>
Cc: [email protected] # v4.19+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/hotplug/pciehp_hpc.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -98,6 +98,8 @@ static int pcie_poll_cmd(struct controll
if (slot_status & PCI_EXP_SLTSTA_CC) {
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_CC);
+ ctrl->cmd_busy = 0;
+ smp_mb();
return 1;
}
msleep(10);
From: Jocelyn Falempe <[email protected]>
commit 028a73e10705af1ffd51f2537460f616dc58680e upstream.
On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS,
the hardware hangs when using kdump and kexec into the kdump kernel.
This happens when the uncompress code tries to write "Decompressing Linux"
to the VGA Console.
It can be reproduced by writing to the VGA console (0xB8000) after
booting to graphic mode, it generates the following error:
kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0.
kernel:Dazed and confused, but trying to continue
The root cause is the configuration of the MGA GCTL6 register
According to the GCTL6 register documentation:
bit 0 is gcgrmode:
0: Enables alpha mode, and the character generator addressing system is
activated.
1: Enables graphics mode, and the character addressing system is not
used.
bit 1 is chainodd even:
0: The A0 signal of the memory address bus is used during system memory
addressing.
1: Allows A0 to be replaced by either the A16 signal of the system
address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even
page select) field, described on page 3-294).
bit 3-2 are memmapsl:
Memory map select bits 1 and 0. VGA.
These bits select where the video memory is mapped, as shown below:
00 => A0000h - BFFFFh
01 => A0000h - AFFFFh
10 => B0000h - B7FFFh
11 => B8000h - BFFFFh
bit 7-4 are reserved.
Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode)
But on x86, the VGA console is at 0xb8000 (text mode)
In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000
As the driver doesn't use this mapping at 0xa0000, it is safe to set it to
0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump.
Thus changing the value 0x05 to 0x0d
Signed-off-by: Jocelyn Falempe <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Acked-by: Lyude Paul <[email protected]>
Cc: [email protected]
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/mgag200/mgag200_mode.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -529,7 +529,10 @@ static void mgag200_set_format_regs(stru
WREG_GFX(3, 0x00);
WREG_GFX(4, 0x00);
WREG_GFX(5, 0x40);
- WREG_GFX(6, 0x05);
+ /* GCTL6 should be 0x05, but we configure memmapsl to 0xb8000 (text mode),
+ * so that it doesn't hang when running kexec/kdump on G200_SE rev42.
+ */
+ WREG_GFX(6, 0x0d);
WREG_GFX(7, 0x0f);
WREG_GFX(8, 0x0f);
From: Stanimir Varbanov <[email protected]>
commit 22beb839f48d841ec75974872863dc253d37c21c upstream.
The HFI_PROPERTY_PARAM_VENC_HDR10_PQ_SEI HFI property is not supported
on Venus v1 and v3.
cc: [email protected] # 5.13+
Fixes: 9172652d72f8 ("media: venus: venc: Add support for CLL and Mastering display controls")
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/qcom/venus/hfi_cmds.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/media/platform/qcom/venus/hfi_cmds.c
+++ b/drivers/media/platform/qcom/venus/hfi_cmds.c
@@ -1054,6 +1054,8 @@ static int pkt_session_set_property_1x(s
pkt->shdr.hdr.size += sizeof(u32) + sizeof(*info);
break;
}
+ case HFI_PROPERTY_PARAM_VENC_HDR10_PQ_SEI:
+ return -ENOTSUPP;
/* FOLLOWING PROPERTIES ARE NOT IMPLEMENTED IN CORE YET */
case HFI_PROPERTY_CONFIG_BUFFER_REQUIREMENTS:
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 89d78e0133e71ba324fb67ca776223fba4353418 ]
The Hantro H1 hardware can crop off pixels from the right and bottom of
the source frame. These are controlled with the H1_REG_IN_IMG_CTRL_OVRFLB
and H1_REG_IN_IMG_CTRL_OVRFLR in the H1_REG_IN_IMG_CTRL register.
The ChromeOS kernel driver that this was based on incorrectly added the
_D4 suffix H1_REG_IN_IMG_CTRL_OVRFLB. This field crops the bottom of the
input frame, and the number is _not_ divided by 4. [1]
Correct the name to avoid confusion when crop support with the selection
API is added.
[1] https://chromium.googlesource.com/chromiumos/third_party/kernel/+/refs/ \
heads/chromeos-4.19/drivers/staging/media/hantro/hantro_h1_vp8_enc.c#377
Fixes: 775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Fixes: a29add8c9bb2 ("media: rockchip/vpu: rename from rockchip to hantro")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/hantro/hantro_h1_jpeg_enc.c | 2 +-
drivers/staging/media/hantro/hantro_h1_regs.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c b/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
index 9cd713c02a45..686d813f5c62 100644
--- a/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
+++ b/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
@@ -23,7 +23,7 @@ static void hantro_h1_set_src_img_ctrl(struct hantro_dev *vpu,
reg = H1_REG_IN_IMG_CTRL_ROW_LEN(pix_fmt->width)
| H1_REG_IN_IMG_CTRL_OVRFLR_D4(0)
- | H1_REG_IN_IMG_CTRL_OVRFLB_D4(0)
+ | H1_REG_IN_IMG_CTRL_OVRFLB(0)
| H1_REG_IN_IMG_CTRL_FMT(ctx->vpu_src_fmt->enc_fmt);
vepu_write_relaxed(vpu, reg, H1_REG_IN_IMG_CTRL);
}
diff --git a/drivers/staging/media/hantro/hantro_h1_regs.h b/drivers/staging/media/hantro/hantro_h1_regs.h
index d6e9825bb5c7..30e7e7b920b5 100644
--- a/drivers/staging/media/hantro/hantro_h1_regs.h
+++ b/drivers/staging/media/hantro/hantro_h1_regs.h
@@ -47,7 +47,7 @@
#define H1_REG_IN_IMG_CTRL 0x03c
#define H1_REG_IN_IMG_CTRL_ROW_LEN(x) ((x) << 12)
#define H1_REG_IN_IMG_CTRL_OVRFLR_D4(x) ((x) << 10)
-#define H1_REG_IN_IMG_CTRL_OVRFLB_D4(x) ((x) << 6)
+#define H1_REG_IN_IMG_CTRL_OVRFLB(x) ((x) << 6)
#define H1_REG_IN_IMG_CTRL_FMT(x) ((x) << 2)
#define H1_REG_ENC_CTRL0 0x040
#define H1_REG_ENC_CTRL0_INIT_QP(x) ((x) << 26)
--
2.34.1
From: Chengming Zhou <[email protected]>
[ Upstream commit 248cc9993d1cc12b8e9ed716cc3fc09f6c3517dd ]
The cpuacct_account_field() is always called by the current task
itself, so it's ok to use __this_cpu_add() to charge the tick time.
But cpuacct_charge() maybe called by update_curr() in load_balance()
on a random CPU, different from the CPU on which the task is running.
So __this_cpu_add() will charge that cputime to a random incorrect CPU.
Fixes: 73e6aafd9ea8 ("sched/cpuacct: Simplify the cpuacct code")
Reported-by: Minye Zhu <[email protected]>
Signed-off-by: Chengming Zhou <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/cpuacct.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/cpuacct.c b/kernel/sched/cpuacct.c
index ab67d97a8442..cacc2076ad21 100644
--- a/kernel/sched/cpuacct.c
+++ b/kernel/sched/cpuacct.c
@@ -328,12 +328,13 @@ static struct cftype files[] = {
*/
void cpuacct_charge(struct task_struct *tsk, u64 cputime)
{
+ unsigned int cpu = task_cpu(tsk);
struct cpuacct *ca;
rcu_read_lock();
for (ca = task_ca(tsk); ca; ca = parent_ca(ca))
- __this_cpu_add(*ca->cpuusage, cputime);
+ *per_cpu_ptr(ca->cpuusage, cpu) += cputime;
rcu_read_unlock();
}
--
2.34.1
From: Jens Axboe <[email protected]>
[ Upstream commit 5e929367468c8f97cd1ffb0417316cecfebef94b ]
The fix for not advancing the iterator if we're using fixed buffers is
broken in that it can hit a condition where we don't terminate the loop.
This results in io-wq looping forever, asking to read (or write) 0 bytes
for every subsequent loop.
Reported-by: Joel Jaeschke <[email protected]>
Link: https://github.com/axboe/liburing/issues/549
Fixes: 16c8d2df7ec0 ("io_uring: ensure symmetry in handling iter types in loop_rw_iter()")
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io_uring.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 70e85f64dc38..ec0b50940405 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -3319,13 +3319,15 @@ static ssize_t loop_rw_iter(int rw, struct io_kiocb *req, struct iov_iter *iter)
ret = nr;
break;
}
+ ret += nr;
if (!iov_iter_is_bvec(iter)) {
iov_iter_advance(iter, nr);
} else {
- req->rw.len -= nr;
req->rw.addr += nr;
+ req->rw.len -= nr;
+ if (!req->rw.len)
+ break;
}
- ret += nr;
if (nr != iovec.iov_len)
break;
}
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit a223ea9f89ab960eb254ba78429efd42eaf845eb ]
Call atmel_trng_disable() on failure path of probe.
Fixes: a1fa98d8116f ("hwrng: atmel - disable TRNG during suspend")
Signed-off-by: Claudiu Beznea <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hw_random/atmel-rng.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index ecb71c4317a5..8cf0ef501341 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -114,6 +114,7 @@ static int atmel_trng_probe(struct platform_device *pdev)
err_register:
clk_disable_unprepare(trng->clk);
+ atmel_trng_disable(trng);
return ret;
}
--
2.34.1
From: Fengnan Chang <[email protected]>
[ Upstream commit 9b56adcf525522e9ffa52471260298d91fc1d395 ]
When compressed file has blocks, f2fs_ioc_start_atomic_write will succeed,
but compressed flag will be remained in inode. If write partial compreseed
cluster and commit atomic write will cause data corruption.
This is the reproduction process:
Step 1:
create a compressed file ,write 64K data , call fsync(), then the blocks
are write as compressed cluster.
Step2:
iotcl(F2FS_IOC_START_ATOMIC_WRITE) --- this should be fail, but not.
write page 0 and page 3.
iotcl(F2FS_IOC_COMMIT_ATOMIC_WRITE) -- page 0 and 3 write as normal file,
Step3:
drop cache.
read page 0-4 -- Since page 0 has a valid block address, read as
non-compressed cluster, page 1 and 2 will be filled with compressed data
or zero.
The root cause is, after commit 7eab7a696827 ("f2fs: compress: remove
unneeded read when rewrite whole cluster"), in step 2, f2fs_write_begin()
only set target page dirty, and in f2fs_commit_inmem_pages(), we will write
partial raw pages into compressed cluster, result in corrupting compressed
cluster layout.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 7eab7a696827 ("f2fs: compress: remove unneeded read when rewrite whole cluster")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Fengnan Chang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/data.c | 2 +-
fs/f2fs/file.c | 5 ++++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index f6e9fc36b837..4cf522120cb1 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -3410,7 +3410,7 @@ static int f2fs_write_begin(struct file *file, struct address_space *mapping,
*fsdata = NULL;
- if (len == PAGE_SIZE)
+ if (len == PAGE_SIZE && !(f2fs_is_atomic_file(inode)))
goto repeat;
ret = f2fs_prepare_compress_overwrite(inode, pagep,
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 7ed44752c758..0e14dc41ed4e 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2002,7 +2002,10 @@ static int f2fs_ioc_start_atomic_write(struct file *filp)
inode_lock(inode);
- f2fs_disable_compressed_file(inode);
+ if (!f2fs_disable_compressed_file(inode)) {
+ ret = -EINVAL;
+ goto out;
+ }
if (f2fs_is_atomic_file(inode)) {
if (is_inode_flag_set(inode, FI_ATOMIC_REVOKE_REQUEST))
--
2.34.1
From: Dan Carpenter <[email protected]>
commit 23a9dbbe0faf124fc4c139615633b9d12a3a89ef upstream.
On a 32 bit system, the "len * sizeof(*p)" operation can have an
integer overflow.
Cc: [email protected]
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/sunrpc/xdr.h | 2 ++
1 file changed, 2 insertions(+)
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -731,6 +731,8 @@ xdr_stream_decode_uint32_array(struct xd
if (unlikely(xdr_stream_decode_u32(xdr, &len) < 0))
return -EBADMSG;
+ if (len > SIZE_MAX / sizeof(*p))
+ return -EBADMSG;
p = xdr_inline_decode(xdr, len * sizeof(*p));
if (unlikely(!p))
return -EBADMSG;
From: Marc Zyngier <[email protected]>
commit 825da4e9cec68713fbb02dc6f71fe1bf65fe8050 upstream.
Commit c7a75d07827a ("PCI: xgene: Fix IB window setup") tried to
fix the damages that 6dce5aa59e0b ("PCI: xgene: Use inbound resources
for setup") caused, but actually didn't improve anything for some
plarforms (at least Mustang and m400 are still broken).
Given that 6dce5aa59e0b has been reverted, revert this patch as well,
restoring the PCIe support on XGene to its pre-5.5, working state.
Link: https://lore.kernel.org/r/YjN8pT5e6/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Fixes: c7a75d07827a ("PCI: xgene: Fix IB window setup")
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Cc: Rob Herring <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Krzysztof Wilczyński <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Stéphane Graber <[email protected]>
Cc: dann frazier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-xgene.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -466,7 +466,7 @@ static int xgene_pcie_select_ib_reg(u8 *
return 1;
}
- if ((size > SZ_1K) && (size < SZ_4G) && !(*ib_reg_mask & (1 << 0))) {
+ if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
*ib_reg_mask |= (1 << 0);
return 0;
}
From: Rafael J. Wysocki <[email protected]>
commit 2ca8e6285250c07a2e5a22ecbfd59b5a4ef73484 upstream.
Revert commit 159d8c274fd9 ("ACPI: Pass the same capabilities to the
_OSC regardless of the query flag") which caused legitimate usage
scenarios (when the platform firmware does not want the OS to control
certain platform features controlled by the system bus scope _OSC) to
break and was misguided by some misleading language in the _OSC
definition in the ACPI specification (in particular, Section 6.2.11.1.3
"Sequence of _OSC Calls" that contradicts other perts of the _OSC
definition).
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iStA0JmO0H3z+VgQsVuQONVjKPpw0F5HKfiq=Gb6B5yw@mail.gmail.com
Reported-by: Mario Limonciello <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Mario Limonciello <[email protected]>
Acked-by: Huang Rui <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/bus.c | 27 +++++++++++++++++++--------
1 file changed, 19 insertions(+), 8 deletions(-)
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -332,21 +332,32 @@ static void acpi_bus_osc_negotiate_platf
if (ACPI_FAILURE(acpi_run_osc(handle, &context)))
return;
- kfree(context.ret.pointer);
+ capbuf_ret = context.ret.pointer;
+ if (context.ret.length <= OSC_SUPPORT_DWORD) {
+ kfree(context.ret.pointer);
+ return;
+ }
- /* Now run _OSC again with query flag clear */
+ /*
+ * Now run _OSC again with query flag clear and with the caps
+ * supported by both the OS and the platform.
+ */
capbuf[OSC_QUERY_DWORD] = 0;
+ capbuf[OSC_SUPPORT_DWORD] = capbuf_ret[OSC_SUPPORT_DWORD];
+ kfree(context.ret.pointer);
if (ACPI_FAILURE(acpi_run_osc(handle, &context)))
return;
capbuf_ret = context.ret.pointer;
- osc_sb_apei_support_acked =
- capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT;
- osc_pc_lpi_support_confirmed =
- capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT;
- osc_sb_native_usb4_support_confirmed =
- capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_NATIVE_USB4_SUPPORT;
+ if (context.ret.length > OSC_SUPPORT_DWORD) {
+ osc_sb_apei_support_acked =
+ capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT;
+ osc_pc_lpi_support_confirmed =
+ capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT;
+ osc_sb_native_usb4_support_confirmed =
+ capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_NATIVE_USB4_SUPPORT;
+ }
kfree(context.ret.pointer);
}
From: Lucas Zampieri <[email protected]>
[ Upstream commit 25666e8ccd952627899b09b68f7c9b68cfeaf028 ]
As of logitech lightspeed receiver fw version 04.02.B0009,
HIDPP_PARAM_DEVICE_INFO is being reported as 0x11.
With patch "HID: logitech-dj: add support for the new lightspeed receiver
iteration", the mouse starts to error out with:
logitech-djreceiver: unusable device of type UNKNOWN (0x011) connected on
slot 1
and becomes unusable.
This has been noticed on a Logitech G Pro X Superlight fw MPM 25.01.B0018.
Signed-off-by: Lucas Zampieri <[email protected]>
Acked-by: Nestor Lopez Casado <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-logitech-dj.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 7106b921b53c..c358778e070b 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -1068,6 +1068,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
workitem.reports_supported |= STD_KEYBOARD;
break;
case 0x0f:
+ case 0x11:
device_type = "eQUAD Lightspeed 1.2";
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
workitem.reports_supported |= STD_KEYBOARD;
--
2.34.1
From: Kirill Tkhai <[email protected]>
commit 588b7f5df0cb64f281290c7672470c006abe7160 upstream.
dm_cleanup_zoned_dev() uses queue, so it must be called
before blk_cleanup_disk() starts its killing:
blk_cleanup_disk->blk_cleanup_queue()->kobject_put()->blk_release_queue()->
->...RCU...->blk_free_queue_rcu()->kmem_cache_free()
Otherwise, RCU callback may be executed first and
dm_cleanup_zoned_dev() will touch free'd memory:
BUG: KASAN: use-after-free in dm_cleanup_zoned_dev+0x33/0xd0
Read of size 8 at addr ffff88805ac6e430 by task dmsetup/681
CPU: 4 PID: 681 Comm: dmsetup Not tainted 5.17.0-rc2+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1f/0x150
? dm_cleanup_zoned_dev+0x33/0xd0
kasan_report.cold+0x7f/0x11b
? dm_cleanup_zoned_dev+0x33/0xd0
dm_cleanup_zoned_dev+0x33/0xd0
__dm_destroy+0x26a/0x400
? dm_blk_ioctl+0x230/0x230
? up_write+0xd8/0x270
dev_remove+0x156/0x1d0
ctl_ioctl+0x269/0x530
? table_clear+0x140/0x140
? lock_release+0xb2/0x750
? remove_all+0x40/0x40
? rcu_read_lock_sched_held+0x12/0x70
? lock_downgrade+0x3c0/0x3c0
? rcu_read_lock_sched_held+0x12/0x70
dm_ctl_ioctl+0xa/0x10
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fb6dfa95c27
Fixes: bb37d77239af ("dm: introduce zone append emulation")
Cc: [email protected]
Signed-off-by: Kirill Tkhai <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1684,6 +1684,7 @@ static void cleanup_mapped_device(struct
md->dax_dev = NULL;
}
+ dm_cleanup_zoned_dev(md);
if (md->disk) {
spin_lock(&_minor_lock);
md->disk->private_data = NULL;
@@ -1704,7 +1705,6 @@ static void cleanup_mapped_device(struct
mutex_destroy(&md->swap_bios_lock);
dm_mq_cleanup_mapped_device(md);
- dm_cleanup_zoned_dev(md);
}
/*
From: Robert Hancock <[email protected]>
[ Upstream commit 1c5091fbe7e0d0804158200b7feac5123f7b4fbd ]
This driver did not set the MM2S Fs Multiplier Register to the proper
value for playback streams. This needs to be set to the sample rate to
MCLK multiplier, or random stream underflows can occur on the downstream
I2S transmitter.
Store the sysclk value provided via the set_sysclk callback and use that
in conjunction with the sample rate in the hw_params callback to calculate
the proper value to set for this register.
Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
Signed-off-by: Robert Hancock <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/xilinx/xlnx_formatter_pcm.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/sound/soc/xilinx/xlnx_formatter_pcm.c b/sound/soc/xilinx/xlnx_formatter_pcm.c
index ce19a6058b27..5c4158069a5a 100644
--- a/sound/soc/xilinx/xlnx_formatter_pcm.c
+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
@@ -84,6 +84,7 @@ struct xlnx_pcm_drv_data {
struct snd_pcm_substream *play_stream;
struct snd_pcm_substream *capture_stream;
struct clk *axi_clk;
+ unsigned int sysclk;
};
/*
@@ -314,6 +315,15 @@ static irqreturn_t xlnx_s2mm_irq_handler(int irq, void *arg)
return IRQ_NONE;
}
+static int xlnx_formatter_set_sysclk(struct snd_soc_component *component,
+ int clk_id, int source, unsigned int freq, int dir)
+{
+ struct xlnx_pcm_drv_data *adata = dev_get_drvdata(component->dev);
+
+ adata->sysclk = freq;
+ return 0;
+}
+
static int xlnx_formatter_pcm_open(struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
@@ -450,11 +460,25 @@ static int xlnx_formatter_pcm_hw_params(struct snd_soc_component *component,
u64 size;
struct snd_pcm_runtime *runtime = substream->runtime;
struct xlnx_pcm_stream_param *stream_data = runtime->private_data;
+ struct xlnx_pcm_drv_data *adata = dev_get_drvdata(component->dev);
active_ch = params_channels(params);
if (active_ch > stream_data->ch_limit)
return -EINVAL;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
+ adata->sysclk) {
+ unsigned int mclk_fs = adata->sysclk / params_rate(params);
+
+ if (adata->sysclk % params_rate(params) != 0) {
+ dev_warn(component->dev, "sysclk %u not divisible by rate %u\n",
+ adata->sysclk, params_rate(params));
+ return -EINVAL;
+ }
+
+ writel(mclk_fs, stream_data->mmio + XLNX_AUD_FS_MULTIPLIER);
+ }
+
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE &&
stream_data->xfer_mode == AES_TO_PCM) {
val = readl(stream_data->mmio + XLNX_AUD_STS);
@@ -552,6 +576,7 @@ static int xlnx_formatter_pcm_new(struct snd_soc_component *component,
static const struct snd_soc_component_driver xlnx_asoc_component = {
.name = DRV_NAME,
+ .set_sysclk = xlnx_formatter_set_sysclk,
.open = xlnx_formatter_pcm_open,
.close = xlnx_formatter_pcm_close,
.hw_params = xlnx_formatter_pcm_hw_params,
--
2.34.1
From: Manivannan Sadhasivam <[email protected]>
commit 1b7101e8124b450f2d6a35591e9cbb478c143ace upstream.
Fix the MSI IRQ used for PCIe instances 1 and 2.
Cc: [email protected]
Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Reported-by: Jordan Crouse <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1495,7 +1495,7 @@
ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
- interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
@@ -1601,7 +1601,7 @@
ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
<0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
- interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
From: Brandon Wyman <[email protected]>
[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ]
If there is an input undervoltage fault, reported in STATUS_INPUT
command response, there is quite likely a "Unit Off For Insufficient
Input Voltage" condition as well.
Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit
attributes to include both bits in the mask for clearing faults.
If an input undervoltage fault occurs, causing a unit off for
insufficient input voltage, but the unit is off bit is not cleared, the
STATUS_WORD will not be updated to clear the input fault condition.
Including the unit is off bit (bit 3) allows for the input fault
condition to completely clear.
Signed-off-by: Brandon Wyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers")
[groeck: Dropped unnecessary ()]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pmbus/pmbus.h | 1 +
drivers/hwmon/pmbus/pmbus_core.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index e0aa8aa46d8c..ef3a8ecde4df 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -319,6 +319,7 @@ enum pmbus_fan_mode { percent = 0, rpm };
/*
* STATUS_VOUT, STATUS_INPUT
*/
+#define PB_VOLTAGE_VIN_OFF BIT(3)
#define PB_VOLTAGE_UV_FAULT BIT(4)
#define PB_VOLTAGE_UV_WARNING BIT(5)
#define PB_VOLTAGE_OV_WARNING BIT(6)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index b1386a4df4cc..ca0bfaf2f691 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -1373,7 +1373,7 @@ static const struct pmbus_limit_attr vin_limit_attrs[] = {
.reg = PMBUS_VIN_UV_FAULT_LIMIT,
.attr = "lcrit",
.alarm = "lcrit_alarm",
- .sbit = PB_VOLTAGE_UV_FAULT,
+ .sbit = PB_VOLTAGE_UV_FAULT | PB_VOLTAGE_VIN_OFF,
}, {
.reg = PMBUS_VIN_OV_WARN_LIMIT,
.attr = "max",
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 8310ca94075e784bbb06593cd6c068ee6b6e4ca6 ]
DST_QUEUE_OFF_BASE is applied to offset/mem_offset on MMAP capture buffers
only for the VIDIOC_QUERYBUF ioctl, while the userspace fields (including
offset/mem_offset) are filled in for VIDIOC_{QUERY,PREPARE,Q,DQ}BUF
ioctls. This leads to differences in the values presented to userspace.
If userspace attempts to mmap the capture buffer directly using values
from DQBUF, it will fail.
Move the code that applies the magic offset into a helper, and call
that helper from all four ioctl entry points.
[hverkuil: drop unnecessary '= 0' in v4l2_m2m_querybuf() for ret]
Fixes: 7f98639def42 ("V4L/DVB: add memory-to-memory device helper framework for videobuf")
Fixes: 908a0d7c588e ("[media] v4l: mem2mem: port to videobuf2")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/v4l2-core/v4l2-mem2mem.c | 53 ++++++++++++++++++++------
1 file changed, 41 insertions(+), 12 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
index e7f4bf5bc8dd..3de683b5e06d 100644
--- a/drivers/media/v4l2-core/v4l2-mem2mem.c
+++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
@@ -585,19 +585,14 @@ int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
}
EXPORT_SYMBOL_GPL(v4l2_m2m_reqbufs);
-int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
- struct v4l2_buffer *buf)
+static void v4l2_m2m_adjust_mem_offset(struct vb2_queue *vq,
+ struct v4l2_buffer *buf)
{
- struct vb2_queue *vq;
- int ret = 0;
- unsigned int i;
-
- vq = v4l2_m2m_get_vq(m2m_ctx, buf->type);
- ret = vb2_querybuf(vq, buf);
-
/* Adjust MMAP memory offsets for the CAPTURE queue */
if (buf->memory == V4L2_MEMORY_MMAP && V4L2_TYPE_IS_CAPTURE(vq->type)) {
if (V4L2_TYPE_IS_MULTIPLANAR(vq->type)) {
+ unsigned int i;
+
for (i = 0; i < buf->length; ++i)
buf->m.planes[i].m.mem_offset
+= DST_QUEUE_OFF_BASE;
@@ -605,8 +600,23 @@ int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
buf->m.offset += DST_QUEUE_OFF_BASE;
}
}
+}
- return ret;
+int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+ struct v4l2_buffer *buf)
+{
+ struct vb2_queue *vq;
+ int ret;
+
+ vq = v4l2_m2m_get_vq(m2m_ctx, buf->type);
+ ret = vb2_querybuf(vq, buf);
+ if (ret)
+ return ret;
+
+ /* Adjust MMAP memory offsets for the CAPTURE queue */
+ v4l2_m2m_adjust_mem_offset(vq, buf);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(v4l2_m2m_querybuf);
@@ -763,6 +773,9 @@ int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
if (ret)
return ret;
+ /* Adjust MMAP memory offsets for the CAPTURE queue */
+ v4l2_m2m_adjust_mem_offset(vq, buf);
+
/*
* If the capture queue is streaming, but streaming hasn't started
* on the device, but was asked to stop, mark the previously queued
@@ -784,9 +797,17 @@ int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
struct v4l2_buffer *buf)
{
struct vb2_queue *vq;
+ int ret;
vq = v4l2_m2m_get_vq(m2m_ctx, buf->type);
- return vb2_dqbuf(vq, buf, file->f_flags & O_NONBLOCK);
+ ret = vb2_dqbuf(vq, buf, file->f_flags & O_NONBLOCK);
+ if (ret)
+ return ret;
+
+ /* Adjust MMAP memory offsets for the CAPTURE queue */
+ v4l2_m2m_adjust_mem_offset(vq, buf);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(v4l2_m2m_dqbuf);
@@ -795,9 +816,17 @@ int v4l2_m2m_prepare_buf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
{
struct video_device *vdev = video_devdata(file);
struct vb2_queue *vq;
+ int ret;
vq = v4l2_m2m_get_vq(m2m_ctx, buf->type);
- return vb2_prepare_buf(vq, vdev->v4l2_dev->mdev, buf);
+ ret = vb2_prepare_buf(vq, vdev->v4l2_dev->mdev, buf);
+ if (ret)
+ return ret;
+
+ /* Adjust MMAP memory offsets for the CAPTURE queue */
+ v4l2_m2m_adjust_mem_offset(vq, buf);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(v4l2_m2m_prepare_buf);
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit e981bc74aefc6a177b50c16cfa7023599799cf74 ]
Add spi_device_id tables to avoid logs like "SPI driver ksz9477-switch
has no spi_device_id".
Signed-off-by: Claudiu Beznea <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz8795_spi.c | 11 +++++++++++
drivers/net/dsa/microchip/ksz9477_spi.c | 12 ++++++++++++
2 files changed, 23 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
index 866767b70d65..b0a7dee27ffc 100644
--- a/drivers/net/dsa/microchip/ksz8795_spi.c
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -124,12 +124,23 @@ static const struct of_device_id ksz8795_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, ksz8795_dt_ids);
+static const struct spi_device_id ksz8795_spi_ids[] = {
+ { "ksz8765" },
+ { "ksz8794" },
+ { "ksz8795" },
+ { "ksz8863" },
+ { "ksz8873" },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, ksz8795_spi_ids);
+
static struct spi_driver ksz8795_spi_driver = {
.driver = {
.name = "ksz8795-switch",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ksz8795_dt_ids),
},
+ .id_table = ksz8795_spi_ids,
.probe = ksz8795_spi_probe,
.remove = ksz8795_spi_remove,
.shutdown = ksz8795_spi_shutdown,
diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index e3cb0e6c9f6f..43addeabfc25 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -98,12 +98,24 @@ static const struct of_device_id ksz9477_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
+static const struct spi_device_id ksz9477_spi_ids[] = {
+ { "ksz9477" },
+ { "ksz9897" },
+ { "ksz9893" },
+ { "ksz9563" },
+ { "ksz8563" },
+ { "ksz9567" },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, ksz9477_spi_ids);
+
static struct spi_driver ksz9477_spi_driver = {
.driver = {
.name = "ksz9477-switch",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ksz9477_dt_ids),
},
+ .id_table = ksz9477_spi_ids,
.probe = ksz9477_spi_probe,
.remove = ksz9477_spi_remove,
.shutdown = ksz9477_spi_shutdown,
--
2.34.1
From: Eric Biggers <[email protected]>
commit e316f7179be22912281ce6331d96d7c121fb2b17 upstream.
Commit c7381b012872 ("crypto: akcipher - new verify API for public key
algorithms") changed akcipher_alg::verify to take in both the signature
and the actual hash and do the signature verification, rather than just
return the hash expected by the signature as was the case before. To do
this, it implemented a hack where the signature and hash are
concatenated with each other in one scatterlist.
Obviously, for this to work correctly, akcipher_alg::verify needs to
correctly extract the two items from the scatterlist it is given.
Unfortunately, it doesn't correctly extract the hash in the case where
the signature is longer than the RSA key size, as it assumes that the
signature's length is equal to the RSA key size. This causes a prefix
of the hash, or even the entire hash, to be taken from the *signature*.
(Note, the case of a signature longer than the RSA key size should not
be allowed in the first place; a separate patch will fix that.)
It is unclear whether the resulting scheme has any useful security
properties.
Fix this by correctly extracting the hash from the scatterlist.
Fixes: c7381b012872 ("crypto: akcipher - new verify API for public key algorithms")
Cc: <[email protected]> # v5.2+
Reviewed-by: Vitaly Chikunov <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa-pkcs1pad.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -495,7 +495,7 @@ static int pkcs1pad_verify_complete(stru
sg_nents_for_len(req->src,
req->src_len + req->dst_len),
req_ctx->out_buf + ctx->key_size,
- req->dst_len, ctx->key_size);
+ req->dst_len, req->src_len);
/* Do the actual verification step. */
if (memcmp(req_ctx->out_buf + ctx->key_size, out_buf + pos,
req->dst_len) != 0)
From: Mateusz Jończyk <[email protected]>
commit 811f5559270f25c34c338d6eaa2ece2544c3d3bd upstream.
In mc146818_set_time(), CMOS_READ(RTC_CONTROL) was performed without the
rtc_lock taken, which is required for CMOS accesses. Fix this.
Nothing in kernel modifies RTC_DM_BINARY, so a separate critical section
is allowed here.
Fixes: dcf257e92622 ("rtc: mc146818: Reduce spinlock section in mc146818_set_time()")
Signed-off-by: Mateusz Jończyk <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-mc146818-lib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -176,8 +176,10 @@ int mc146818_set_time(struct rtc_time *t
if (yrs >= 100)
yrs -= 100;
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
- || RTC_ALWAYS_BCD) {
+ spin_lock_irqsave(&rtc_lock, flags);
+ save_control = CMOS_READ(RTC_CONTROL);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
sec = bin2bcd(sec);
min = bin2bcd(min);
hrs = bin2bcd(hrs);
From: Eric Biggers <[email protected]>
commit d3481accd974541e6a5d6a1fb588924a3519c36e upstream.
RSA PKCS#1 v1.5 signatures are required to be the same length as the RSA
key size. RFC8017 specifically requires the verifier to check this
(https://datatracker.ietf.org/doc/html/rfc8017#section-8.2.2).
Commit a49de377e051 ("crypto: Add hash param to pkcs1pad") changed the
kernel to allow longer signatures, but didn't explain this part of the
change; it seems to be unrelated to the rest of the commit.
Revert this change, since it doesn't appear to be correct.
We can be pretty sure that no one is relying on overly-long signatures
(which would have to be front-padded with zeroes) being supported, given
that they would have been broken since commit c7381b012872
("crypto: akcipher - new verify API for public key algorithms").
Fixes: a49de377e051 ("crypto: Add hash param to pkcs1pad")
Cc: <[email protected]> # v4.6+
Cc: Tadeusz Struk <[email protected]>
Suggested-by: Vitaly Chikunov <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa-pkcs1pad.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -538,7 +538,7 @@ static int pkcs1pad_verify(struct akciph
if (WARN_ON(req->dst) ||
WARN_ON(!req->dst_len) ||
- !ctx->key_size || req->src_len < ctx->key_size)
+ !ctx->key_size || req->src_len != ctx->key_size)
return -EINVAL;
req_ctx->out_buf = kmalloc(ctx->key_size + req->dst_len, GFP_KERNEL);
From: Jens Axboe <[email protected]>
[ Upstream commit adf3a9e9f556613197583a1884f0de40a8bb6fb9 ]
Looks like a victim of too much copy/paste, we should not be looking
at req->open.how in accept. The point is to check CLOEXEC and error
out, which we don't invalid direct descriptors on exec. Hence any
attempt to get a direct descriptor with CLOEXEC is invalid.
No harm is done here, as req->open.how.flags overlaps with
req->accept.flags, but it's very confusing and might change if either of
those command structs are modified.
Fixes: aaa4db12ef7b ("io_uring: accept directly into fixed file table")
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io_uring.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 156c54ebb62b..70e85f64dc38 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -5154,8 +5154,7 @@ static int io_accept_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
accept->nofile = rlimit(RLIMIT_NOFILE);
accept->file_slot = READ_ONCE(sqe->file_index);
- if (accept->file_slot && ((req->open.how.flags & O_CLOEXEC) ||
- (accept->flags & SOCK_CLOEXEC)))
+ if (accept->file_slot && (accept->flags & SOCK_CLOEXEC))
return -EINVAL;
if (accept->flags & ~(SOCK_CLOEXEC | SOCK_NONBLOCK))
return -EINVAL;
--
2.34.1
From: Eric Biggers <[email protected]>
commit 590bfb57b2328951d5833979e7ca1d5fde2e609a upstream.
It is insecure to allow arbitrary hash algorithms and signature
encodings to be used with arbitrary signature algorithms. Notably,
ECDSA, ECRDSA, and SM2 all sign/verify raw hash values and don't
disambiguate between different hash algorithms like RSA PKCS#1 v1.5
padding does. Therefore, they need to be restricted to certain sets of
hash algorithms (ideally just one, but in practice small sets are used).
Additionally, the encoding is an integral part of modern signature
algorithms, and is not supposed to vary.
Therefore, tighten the checks of hash_algo and encoding done by
software_key_determine_akcipher().
Also rearrange the parameters to software_key_determine_akcipher() to
put the public_key first, as this is the most important parameter and it
often determines everything else.
Fixes: 299f561a6693 ("x509: Add support for parsing x509 certs with ECDSA keys")
Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Fixes: 0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm")
Cc: [email protected]
Tested-by: Stefan Berger <[email protected]>
Tested-by: Tianjia Zhang <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Vitaly Chikunov <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/asymmetric_keys/public_key.c | 111 ++++++++++++++++++++++++------------
1 file changed, 76 insertions(+), 35 deletions(-)
--- a/crypto/asymmetric_keys/public_key.c
+++ b/crypto/asymmetric_keys/public_key.c
@@ -60,39 +60,83 @@ static void public_key_destroy(void *pay
}
/*
- * Determine the crypto algorithm name.
+ * Given a public_key, and an encoding and hash_algo to be used for signing
+ * and/or verification with that key, determine the name of the corresponding
+ * akcipher algorithm. Also check that encoding and hash_algo are allowed.
*/
-static
-int software_key_determine_akcipher(const char *encoding,
- const char *hash_algo,
- const struct public_key *pkey,
- char alg_name[CRYPTO_MAX_ALG_NAME])
+static int
+software_key_determine_akcipher(const struct public_key *pkey,
+ const char *encoding, const char *hash_algo,
+ char alg_name[CRYPTO_MAX_ALG_NAME])
{
int n;
- if (strcmp(encoding, "pkcs1") == 0) {
- /* The data wangled by the RSA algorithm is typically padded
- * and encoded in some manner, such as EMSA-PKCS1-1_5 [RFC3447
- * sec 8.2].
+ if (!encoding)
+ return -EINVAL;
+
+ if (strcmp(pkey->pkey_algo, "rsa") == 0) {
+ /*
+ * RSA signatures usually use EMSA-PKCS1-1_5 [RFC3447 sec 8.2].
+ */
+ if (strcmp(encoding, "pkcs1") == 0) {
+ if (!hash_algo)
+ n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME,
+ "pkcs1pad(%s)",
+ pkey->pkey_algo);
+ else
+ n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME,
+ "pkcs1pad(%s,%s)",
+ pkey->pkey_algo, hash_algo);
+ return n >= CRYPTO_MAX_ALG_NAME ? -EINVAL : 0;
+ }
+ if (strcmp(encoding, "raw") != 0)
+ return -EINVAL;
+ /*
+ * Raw RSA cannot differentiate between different hash
+ * algorithms.
+ */
+ if (hash_algo)
+ return -EINVAL;
+ } else if (strncmp(pkey->pkey_algo, "ecdsa", 5) == 0) {
+ if (strcmp(encoding, "x962") != 0)
+ return -EINVAL;
+ /*
+ * ECDSA signatures are taken over a raw hash, so they don't
+ * differentiate between different hash algorithms. That means
+ * that the verifier should hard-code a specific hash algorithm.
+ * Unfortunately, in practice ECDSA is used with multiple SHAs,
+ * so we have to allow all of them and not just one.
*/
if (!hash_algo)
- n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME,
- "pkcs1pad(%s)",
- pkey->pkey_algo);
- else
- n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME,
- "pkcs1pad(%s,%s)",
- pkey->pkey_algo, hash_algo);
- return n >= CRYPTO_MAX_ALG_NAME ? -EINVAL : 0;
- }
-
- if (strcmp(encoding, "raw") == 0 ||
- strcmp(encoding, "x962") == 0) {
- strcpy(alg_name, pkey->pkey_algo);
- return 0;
+ return -EINVAL;
+ if (strcmp(hash_algo, "sha1") != 0 &&
+ strcmp(hash_algo, "sha224") != 0 &&
+ strcmp(hash_algo, "sha256") != 0 &&
+ strcmp(hash_algo, "sha384") != 0 &&
+ strcmp(hash_algo, "sha512") != 0)
+ return -EINVAL;
+ } else if (strcmp(pkey->pkey_algo, "sm2") == 0) {
+ if (strcmp(encoding, "raw") != 0)
+ return -EINVAL;
+ if (!hash_algo)
+ return -EINVAL;
+ if (strcmp(hash_algo, "sm3") != 0)
+ return -EINVAL;
+ } else if (strcmp(pkey->pkey_algo, "ecrdsa") == 0) {
+ if (strcmp(encoding, "raw") != 0)
+ return -EINVAL;
+ if (!hash_algo)
+ return -EINVAL;
+ if (strcmp(hash_algo, "streebog256") != 0 &&
+ strcmp(hash_algo, "streebog512") != 0)
+ return -EINVAL;
+ } else {
+ /* Unknown public key algorithm */
+ return -ENOPKG;
}
-
- return -ENOPKG;
+ if (strscpy(alg_name, pkey->pkey_algo, CRYPTO_MAX_ALG_NAME) < 0)
+ return -EINVAL;
+ return 0;
}
static u8 *pkey_pack_u32(u8 *dst, u32 val)
@@ -113,9 +157,8 @@ static int software_key_query(const stru
u8 *key, *ptr;
int ret, len;
- ret = software_key_determine_akcipher(params->encoding,
- params->hash_algo,
- pkey, alg_name);
+ ret = software_key_determine_akcipher(pkey, params->encoding,
+ params->hash_algo, alg_name);
if (ret < 0)
return ret;
@@ -179,9 +222,8 @@ static int software_key_eds_op(struct ke
pr_devel("==>%s()\n", __func__);
- ret = software_key_determine_akcipher(params->encoding,
- params->hash_algo,
- pkey, alg_name);
+ ret = software_key_determine_akcipher(pkey, params->encoding,
+ params->hash_algo, alg_name);
if (ret < 0)
return ret;
@@ -340,9 +382,8 @@ int public_key_verify_signature(const st
return -EKEYREJECTED;
}
- ret = software_key_determine_akcipher(sig->encoding,
- sig->hash_algo,
- pkey, alg_name);
+ ret = software_key_determine_akcipher(pkey, sig->encoding,
+ sig->hash_algo, alg_name);
if (ret < 0)
return ret;
From: Jianglei Nie <[email protected]>
[ Upstream commit 3d950c34074ed74d2713c3856ba01264523289e6 ]
kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But
ctx_p->user.key is still used in the next line, which will lead to a
use after free.
We can call kfree_sensitive() after dev_dbg() to avoid the uaf.
Fixes: 63ee04c8b491 ("crypto: ccree - add skcipher support")
Signed-off-by: Jianglei Nie <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ccree/cc_cipher.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/ccree/cc_cipher.c b/drivers/crypto/ccree/cc_cipher.c
index 78833491f534..309da6334a0a 100644
--- a/drivers/crypto/ccree/cc_cipher.c
+++ b/drivers/crypto/ccree/cc_cipher.c
@@ -257,8 +257,8 @@ static void cc_cipher_exit(struct crypto_tfm *tfm)
&ctx_p->user.key_dma_addr);
/* Free key buffer in context */
- kfree_sensitive(ctx_p->user.key);
dev_dbg(dev, "Free key buffer in context. key=@%p\n", ctx_p->user.key);
+ kfree_sensitive(ctx_p->user.key);
}
struct tdes_keys {
--
2.34.1
From: Helge Deller <[email protected]>
commit bd771cf5c4254511cc4abb88f3dab3bd58bdf8e8 upstream.
Zheyu Ma reported this crash in the sm712fb driver when reading
three bytes from the framebuffer:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_read+0x230/0x3e0
Call Trace:
vfs_read+0x198/0xa00
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_read+0xce/0x190
do_syscall_64+0x43/0x90
Fix it by removing the open-coded endianess fixup-code and
by moving the pointer post decrement out the fb_readl() function.
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Tested-by: Zheyu Ma <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 25 +++++++------------------
1 file changed, 7 insertions(+), 18 deletions(-)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1047,7 +1047,7 @@ static ssize_t smtcfb_read(struct fb_inf
if (count + p > total_size)
count = total_size - p;
- buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL);
+ buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
@@ -1059,25 +1059,14 @@ static ssize_t smtcfb_read(struct fb_inf
while (count) {
c = (count > PAGE_SIZE) ? PAGE_SIZE : count;
dst = buffer;
- for (i = c >> 2; i--;) {
- *dst = fb_readl(src++);
- *dst = big_swap(*dst);
+ for (i = (c + 3) >> 2; i--;) {
+ u32 val;
+
+ val = fb_readl(src);
+ *dst = big_swap(val);
+ src++;
dst++;
}
- if (c & 3) {
- u8 *dst8 = (u8 *)dst;
- u8 __iomem *src8 = (u8 __iomem *)src;
-
- for (i = c & 3; i--;) {
- if (i & 1) {
- *dst8++ = fb_readb(++src8);
- } else {
- *dst8++ = fb_readb(--src8);
- src8 += 2;
- }
- }
- src = (u32 __iomem *)src8;
- }
if (copy_to_user(buf, buffer, c)) {
err = -EFAULT;
From: Janusz Krzysztofik <[email protected]>
[ Upstream commit 1f6f1e959a85ee999fbc86f4b094827f63194c7f ]
According to subdevice interface specification found in V4L2 API
documentation, set format pad operations should not affect image
geometry set in preceding image processing steps. Unfortunately, that
requirement is not respected by the driver implementation of set format
as it was not the case when that code was still implementing a pair of
now obsolete .s_mbus_fmt() / .try_mbus_fmt() video operations before
they have been merged and reused as an implementation of .set_fmt() pad
operation by commit 717fd5b4907a ("[media] v4l2: replace try_mbus_fmt
by set_fmt").
In case of set format active processing path the issue can be fixed
easily by excluding a call to set active selection from that path. That
will effectively limit frame size processing to optimal frame scaling
against active crop rectangle without touching it. Users can just call
set active selection themselves to obtain desired frame size. However,
set format try processing path needs more work.
First of all, the driver should be extended with set try selection
support. Lack of it constraints video device drivers to not use
subdevice cropping at all while processing user requested active frame
size, otherwise their set try format results might differ from active.
Next, set format try processing path should use pad config crop
rectangle as a reference, not the active one as it does now. That
issue can be resolved easily as soon as set try selection support is
added to the driver so pad config crop rectangle can be maintained by
users via selection API.
Last, set format try processing path should give the same results as
active in respect to active vs. pad config crop rectangle geometry.
Both rectangles should be either not touched by set format (that's what
we are going to achieve) or modified the same way, otherwise users
won't be able to obtain equal results from both paths while iterating
through set format and set selection operations in order to obtain
desired frame size.
We can't begin with modifying set format pad operation as not to touch
crop rectangle since that depends on availability of set try selection
for symmetry. Neither can we begin with adding set try selection since
that in turn depends on equal handling of active and pad config crop
rectangles by set format. We can either implement all required
modifications in a single patch, or begin with fixing current set
format try processing path to appropriately handle pad config crop
rectangle. This patch implements the latter approach as believed to
be more readable.
Move crop rectangle adjustments code from a helper (the former
implementation of .s_fmt(), now called from set format active
processing path) to the body of set format pad operation function
where it can be also used for processing try requests for symmetry with
active ones. As the helper no longer processes frame geometry, only
frame format and half scaling, simplify its API accordingly and update
its users.
Moreover, extract code that applies crop rectangle hardware limits
(now a part of .set_selection() operation which is called from set
format active processing path) to a new helper and call that helper
from set format try processing path as well for symmetry with active.
[Sakari Ailus: Rebase on subdev state patches]
Fixes: 717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov6650.c | 83 ++++++++++++++++++++++----------------
1 file changed, 48 insertions(+), 35 deletions(-)
diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index f67412150b16..8b7540e80685 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -491,6 +491,17 @@ static int ov6650_get_selection(struct v4l2_subdev *sd,
}
}
+static void ov6650_bind_align_crop_rectangle(struct v4l2_rect *rect)
+{
+ v4l_bound_align_image(&rect->width, 2, W_CIF, 1,
+ &rect->height, 2, H_CIF, 1, 0);
+ v4l_bound_align_image(&rect->left, DEF_HSTRT << 1,
+ (DEF_HSTRT << 1) + W_CIF - (__s32)rect->width, 1,
+ &rect->top, DEF_VSTRT << 1,
+ (DEF_VSTRT << 1) + H_CIF - (__s32)rect->height,
+ 1, 0);
+}
+
static int ov6650_set_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_selection *sel)
@@ -503,13 +514,7 @@ static int ov6650_set_selection(struct v4l2_subdev *sd,
sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
- v4l_bound_align_image(&sel->r.width, 2, W_CIF, 1,
- &sel->r.height, 2, H_CIF, 1, 0);
- v4l_bound_align_image(&sel->r.left, DEF_HSTRT << 1,
- (DEF_HSTRT << 1) + W_CIF - (__s32)sel->r.width, 1,
- &sel->r.top, DEF_VSTRT << 1,
- (DEF_VSTRT << 1) + H_CIF - (__s32)sel->r.height,
- 1, 0);
+ ov6650_bind_align_crop_rectangle(&sel->r);
ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
if (!ret) {
@@ -570,22 +575,10 @@ static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
#define to_clkrc(div) ((div) - 1)
/* set the format we will capture in */
-static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
+static int ov6650_s_fmt(struct v4l2_subdev *sd, u32 code, bool half_scale)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov6650 *priv = to_ov6650(client);
- bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect);
- struct v4l2_subdev_selection sel = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .target = V4L2_SEL_TGT_CROP,
- .r.left = priv->rect.left + (priv->rect.width >> 1) -
- (mf->width >> (1 - half_scale)),
- .r.top = priv->rect.top + (priv->rect.height >> 1) -
- (mf->height >> (1 - half_scale)),
- .r.width = mf->width << half_scale,
- .r.height = mf->height << half_scale,
- };
- u32 code = mf->code;
u8 coma_set = 0, coma_mask = 0, coml_set, coml_mask;
int ret;
@@ -653,9 +646,7 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
coma_mask |= COMA_QCIF;
}
- ret = ov6650_set_selection(sd, NULL, &sel);
- if (!ret)
- ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask);
+ ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask);
if (!ret) {
priv->half_scale = half_scale;
@@ -674,14 +665,16 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mf = &format->format;
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov6650 *priv = to_ov6650(client);
+ struct v4l2_subdev_selection sel = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ .target = V4L2_SEL_TGT_CROP,
+ };
+ struct v4l2_rect *crop = &sel.r;
+ bool half_scale;
if (format->pad)
return -EINVAL;
- if (is_unscaled_ok(mf->width, mf->height, &priv->rect))
- v4l_bound_align_image(&mf->width, 2, W_CIF, 1,
- &mf->height, 2, H_CIF, 1, 0);
-
switch (mf->code) {
case MEDIA_BUS_FMT_Y10_1X10:
mf->code = MEDIA_BUS_FMT_Y8_1X8;
@@ -699,10 +692,24 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
break;
}
+ *crop = priv->rect;
+ half_scale = !is_unscaled_ok(mf->width, mf->height, crop);
+
+ /* adjust new crop rectangle position against its current center */
+ crop->left += (crop->width - (mf->width << half_scale)) / 2;
+ crop->top += (crop->height - (mf->height << half_scale)) / 2;
+ /* adjust new crop rectangle size */
+ crop->width = mf->width << half_scale;
+ crop->height = mf->height << half_scale;
+
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
- /* store media bus format code and frame size in pad config */
- sd_state->pads->try_fmt.width = mf->width;
- sd_state->pads->try_fmt.height = mf->height;
+ /* store new crop rectangle, hadware bound, in pad config */
+ ov6650_bind_align_crop_rectangle(crop);
+ sd_state->pads->try_crop = *crop;
+
+ /* store new mbus frame format code and size in pad config */
+ sd_state->pads->try_fmt.width = crop->width >> half_scale;
+ sd_state->pads->try_fmt.height = crop->height >> half_scale;
sd_state->pads->try_fmt.code = mf->code;
/* return default mbus frame format updated with pad config */
@@ -712,9 +719,16 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
mf->code = sd_state->pads->try_fmt.code;
} else {
- /* apply new media bus format code and frame size */
- int ret = ov6650_s_fmt(sd, mf);
+ int ret;
+ /* apply new crop rectangle */
+ ret = ov6650_set_selection(sd, NULL, &sel);
+ if (ret)
+ return ret;
+
+ /* apply new media bus frame format and scaling if changed */
+ if (mf->code != priv->code || half_scale != priv->half_scale)
+ ret = ov6650_s_fmt(sd, mf->code, half_scale);
if (ret)
return ret;
@@ -890,9 +904,8 @@ static int ov6650_video_probe(struct v4l2_subdev *sd)
if (!ret)
ret = ov6650_prog_dflt(client, xclk->clkrc);
if (!ret) {
- struct v4l2_mbus_framefmt mf = ov6650_def_fmt;
-
- ret = ov6650_s_fmt(sd, &mf);
+ /* driver default frame format, no scaling */
+ ret = ov6650_s_fmt(sd, ov6650_def_fmt.code, false);
}
if (!ret)
ret = v4l2_ctrl_handler_setup(&priv->hdl);
--
2.34.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit 609d7ffdc42199a0ec949db057e3b4be6745d6c5 ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 743485ea3bee ("spi: pxa2xx-pci: Do a specific setup in a separate function")
Fixes: 25014521603f ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield")
Reported-by: Wang Qing <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-pxa2xx-pci.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 2e134eb4bd2c..6502fda6243e 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -76,14 +76,23 @@ static bool lpss_dma_filter(struct dma_chan *chan, void *param)
return true;
}
+static void lpss_dma_put_device(void *dma_dev)
+{
+ pci_dev_put(dma_dev);
+}
+
static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
{
struct pci_dev *dma_dev;
+ int ret;
c->num_chipselect = 1;
c->max_clk_rate = 50000000;
dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+ ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
+ if (ret)
+ return ret;
if (c->tx_param) {
struct dw_dma_slave *slave = c->tx_param;
@@ -107,8 +116,9 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
{
- struct pci_dev *dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
struct dw_dma_slave *tx, *rx;
+ struct pci_dev *dma_dev;
+ int ret;
switch (PCI_FUNC(dev->devfn)) {
case 0:
@@ -133,6 +143,11 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
return -ENODEV;
}
+ dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
+ ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
+ if (ret)
+ return ret;
+
tx = c->tx_param;
tx->dma_dev = &dma_dev->dev;
--
2.34.1
From: Adrian Hunter <[email protected]>
[ Upstream commit e5524bf1047eb3b3f3f33b5f59897ba67b3ade87 ]
Change from shifting 'unsigned long' to 'u64' to prevent the config bits
being lost on a 32-bit kernel.
Fixes: eadf48cab4b6b0 ("perf/x86/intel/pt: Add support for address range filtering in PT")
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/pt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 2d33bba9a144..215aed65e978 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -472,7 +472,7 @@ static u64 pt_config_filters(struct perf_event *event)
pt->filters.filter[range].msr_b = filter->msr_b;
}
- rtit_ctl |= filter->config << pt_address_ranges[range].reg_off;
+ rtit_ctl |= (u64)filter->config << pt_address_ranges[range].reg_off;
}
return rtit_ctl;
--
2.34.1
From: Marcelo Roberto Jimenez <[email protected]>
[ Upstream commit fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
Some GPIO lines have stopped working after the patch
commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
And this has supposedly been fixed in the following patches
commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL")
commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
But an erratic behavior where some GPIO lines work while others do not work
has been introduced.
This patch reverts those changes so that the sysfs-gpio interface works
properly again.
Signed-off-by: Marcelo Roberto Jimenez <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpiolib.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 358f0ad9d0f8..12b59cdffdf3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1660,11 +1660,6 @@ static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
*/
int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset)
{
-#ifdef CONFIG_PINCTRL
- if (list_empty(&gc->gpiodev->pin_ranges))
- return 0;
-#endif
-
return pinctrl_gpio_request(gc->gpiodev->base + offset);
}
EXPORT_SYMBOL_GPL(gpiochip_generic_request);
@@ -1676,11 +1671,6 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_request);
*/
void gpiochip_generic_free(struct gpio_chip *gc, unsigned int offset)
{
-#ifdef CONFIG_PINCTRL
- if (list_empty(&gc->gpiodev->pin_ranges))
- return;
-#endif
-
pinctrl_gpio_free(gc->gpiodev->base + offset);
}
EXPORT_SYMBOL_GPL(gpiochip_generic_free);
--
2.34.1
From: Kai-Heng Feng <[email protected]>
commit f30741cded62f87bb4b1cc58bc627f076abcaba8 upstream.
Commit 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording
issue") is to solve recording issue met on AL236, by matching codec
variant ALC269_TYPE_ALC257 and ALC269_TYPE_ALC256.
This match can be too broad and Mi Notebook Pro 2020 is broken by the
patch.
Instead, use codec ID to be narrow down the scope, in order to make
ALC256 unaffected.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215484
Fixes: 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Cc: <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3612,8 +3612,8 @@ static void alc256_shutup(struct hda_cod
/* If disable 3k pulldown control for alc257, the Mic detection will not work correctly
* when booting with headset plugged. So skip setting it for the codec alc257
*/
- if (spec->codec_variant != ALC269_TYPE_ALC257 &&
- spec->codec_variant != ALC269_TYPE_ALC256)
+ if (codec->core.vendor_id != 0x10ec0236 &&
+ codec->core.vendor_id != 0x10ec0257)
alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
if (!spec->no_shutup_pins)
From: Krzysztof Kozlowski <[email protected]>
commit 50ebd19e3585b9792e994cfa8cbee8947fe06371 upstream.
The driver iterates over its devicetree children with
for_each_child_of_node() and stores for later found node pointer. This
has to be put in error paths to avoid leak during re-probing.
Fixes: ab663789d697 ("pinctrl: samsung: Match pin banks with their device nodes")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Sam Protsenko <[email protected]>
Reviewed-by: Chanho Park <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/samsung/pinctrl-samsung.c | 30 +++++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1002,6 +1002,16 @@ samsung_pinctrl_get_soc_data_for_of_alia
return &(of_data->ctrl[id]);
}
+static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
+{
+ struct samsung_pin_bank *bank;
+ unsigned int i;
+
+ bank = d->pin_banks;
+ for (i = 0; i < d->nr_banks; ++i, ++bank)
+ of_node_put(bank->of_node);
+}
+
/* retrieve the soc specific data */
static const struct samsung_pin_ctrl *
samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
@@ -1116,19 +1126,19 @@ static int samsung_pinctrl_probe(struct
if (ctrl->retention_data) {
drvdata->retention_ctrl = ctrl->retention_data->init(drvdata,
ctrl->retention_data);
- if (IS_ERR(drvdata->retention_ctrl))
- return PTR_ERR(drvdata->retention_ctrl);
+ if (IS_ERR(drvdata->retention_ctrl)) {
+ ret = PTR_ERR(drvdata->retention_ctrl);
+ goto err_put_banks;
+ }
}
ret = samsung_pinctrl_register(pdev, drvdata);
if (ret)
- return ret;
+ goto err_put_banks;
ret = samsung_gpiolib_register(pdev, drvdata);
- if (ret) {
- samsung_pinctrl_unregister(pdev, drvdata);
- return ret;
- }
+ if (ret)
+ goto err_unregister;
if (ctrl->eint_gpio_init)
ctrl->eint_gpio_init(drvdata);
@@ -1138,6 +1148,12 @@ static int samsung_pinctrl_probe(struct
platform_set_drvdata(pdev, drvdata);
return 0;
+
+err_unregister:
+ samsung_pinctrl_unregister(pdev, drvdata);
+err_put_banks:
+ samsung_banks_of_node_put(drvdata);
+ return ret;
}
/*
From: Nishanth Menon <[email protected]>
commit de60edf1be3d42d4a1b303b41c7c53b2f865726e upstream.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A53 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
[1] https://developer.arm.com/documentation/ddi0500/e/system-control/aarch64-register-descriptions/configuration-base-address-register--el1
[2] https://lore.kernel.org/all/[email protected]/
[3] https://developer.arm.com/documentation/ddi0500/e/generic-interrupt-controller-cpu-interface/gic-programmers-model/memory-map
Cc: [email protected]
Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Reported-by: Marc Zyngier <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 5 ++++-
arch/arm64/boot/dts/ti/k3-am64.dtsi | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -59,7 +59,10 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01840000 0x00 0xC0000>; /* GICR */
+ <0x00 0x01840000 0x00 0xC0000>, /* GICR */
+ <0x01 0x00000000 0x00 0x2000>, /* GICC */
+ <0x01 0x00010000 0x00 0x1000>, /* GICH */
+ <0x01 0x00020000 0x00 0x2000>; /* GICV */
/*
* vcpumntirq:
* virtual CPU interface maintenance interrupt
--- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -85,6 +85,7 @@
<0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
<0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
<0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
+ <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
<0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
From: Jiasheng Jiang <[email protected]>
[ Upstream commit aa505ecccf2ae7546e0e262d574e18a9241f3005 ]
Since the potential failure of the devm_regmap_init_mmio(), it will
return error pointer and be assigned to the regmap.
Then the error pointer will be dereferenced.
For example rx->regmap will be used in rx_macro_mclk_enable().
Therefore, it should be better to check it.
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: 809bcbcecebf ("ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/lpass-rx-macro.c | 2 ++
sound/soc/codecs/lpass-tx-macro.c | 2 ++
sound/soc/codecs/lpass-wsa-macro.c | 2 ++
3 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c
index 1c0409350e86..0f932ca61c81 100644
--- a/sound/soc/codecs/lpass-rx-macro.c
+++ b/sound/soc/codecs/lpass-rx-macro.c
@@ -3542,6 +3542,8 @@ static int rx_macro_probe(struct platform_device *pdev)
return PTR_ERR(base);
rx->regmap = devm_regmap_init_mmio(dev, base, &rx_regmap_config);
+ if (IS_ERR(rx->regmap))
+ return PTR_ERR(rx->regmap);
dev_set_drvdata(dev, rx);
diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c
index 27a0d5defd27..e4bbc6bd4925 100644
--- a/sound/soc/codecs/lpass-tx-macro.c
+++ b/sound/soc/codecs/lpass-tx-macro.c
@@ -1803,6 +1803,8 @@ static int tx_macro_probe(struct platform_device *pdev)
return PTR_ERR(base);
tx->regmap = devm_regmap_init_mmio(dev, base, &tx_regmap_config);
+ if (IS_ERR(tx->regmap))
+ return PTR_ERR(tx->regmap);
dev_set_drvdata(dev, tx);
diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c
index d3ac318fd6b6..dd1a8b7bc794 100644
--- a/sound/soc/codecs/lpass-wsa-macro.c
+++ b/sound/soc/codecs/lpass-wsa-macro.c
@@ -2405,6 +2405,8 @@ static int wsa_macro_probe(struct platform_device *pdev)
return PTR_ERR(base);
wsa->regmap = devm_regmap_init_mmio(dev, base, &wsa_regmap_config);
+ if (IS_ERR(wsa->regmap))
+ return PTR_ERR(wsa->regmap);
dev_set_drvdata(dev, wsa);
--
2.34.1
From: Thomas Zimmermann <[email protected]>
commit 27599aacbaefcbf2af7b06b0029459bbf682000d upstream.
Hot-unplug all firmware-framebuffer devices as part of removing
them via remove_conflicting_framebuffers() et al. Releases all
memory regions to be acquired by native drivers.
Firmware, such as EFI, install a framebuffer while posting the
computer. After removing the firmware-framebuffer device from fbdev,
a native driver takes over the hardware and the firmware framebuffer
becomes invalid.
Firmware-framebuffer drivers, specifically simplefb, don't release
their device from Linux' device hierarchy. It still owns the firmware
framebuffer and blocks the native drivers from loading. This has been
observed in the vmwgfx driver. [1]
Initiating a device removal (i.e., hot unplug) as part of
remove_conflicting_framebuffers() removes the underlying device and
returns the memory range to the system.
[1] https://lore.kernel.org/dri-devel/[email protected]/
v2:
* rename variable 'dev' to 'device' (Javier)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reported-by: Zack Rusin <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
CC: [email protected] # v5.11+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/core/fbmem.c | 29 ++++++++++++++++++++++++++---
include/linux/fb.h | 1 +
2 files changed, 27 insertions(+), 3 deletions(-)
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/linux_logo.h>
#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
#include <linux/seq_file.h>
#include <linux/console.h>
#include <linux/kmod.h>
@@ -1557,18 +1558,36 @@ static void do_remove_conflicting_frameb
/* check all firmware fbs and kick off if the base addr overlaps */
for_each_registered_fb(i) {
struct apertures_struct *gen_aper;
+ struct device *device;
if (!(registered_fb[i]->flags & FBINFO_MISC_FIRMWARE))
continue;
gen_aper = registered_fb[i]->apertures;
+ device = registered_fb[i]->device;
if (fb_do_apertures_overlap(gen_aper, a) ||
(primary && gen_aper && gen_aper->count &&
gen_aper->ranges[0].base == VGA_FB_PHYS)) {
printk(KERN_INFO "fb%d: switching to %s from %s\n",
i, name, registered_fb[i]->fix.id);
- do_unregister_framebuffer(registered_fb[i]);
+
+ /*
+ * If we kick-out a firmware driver, we also want to remove
+ * the underlying platform device, such as simple-framebuffer,
+ * VESA, EFI, etc. A native driver will then be able to
+ * allocate the memory range.
+ *
+ * If it's not a platform device, at least print a warning. A
+ * fix would add code to remove the device from the system.
+ */
+ if (dev_is_platform(device)) {
+ registered_fb[i]->forced_out = true;
+ platform_device_unregister(to_platform_device(device));
+ } else {
+ pr_warn("fb%d: cannot remove device\n", i);
+ do_unregister_framebuffer(registered_fb[i]);
+ }
}
}
}
@@ -1895,9 +1914,13 @@ EXPORT_SYMBOL(register_framebuffer);
void
unregister_framebuffer(struct fb_info *fb_info)
{
- mutex_lock(®istration_lock);
+ bool forced_out = fb_info->forced_out;
+
+ if (!forced_out)
+ mutex_lock(®istration_lock);
do_unregister_framebuffer(fb_info);
- mutex_unlock(®istration_lock);
+ if (!forced_out)
+ mutex_unlock(®istration_lock);
}
EXPORT_SYMBOL(unregister_framebuffer);
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -502,6 +502,7 @@ struct fb_info {
} *apertures;
bool skip_vt_switch; /* no VT switch on suspend/resume required */
+ bool forced_out; /* set when being removed by another driver */
};
static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
From: Tudor Ambarus <[email protected]>
commit 0fb578a529ac7aca326a9fa475b4a6f58a756fda upstream.
PMERRLOC resource size was set to 0x100, which resulted in HSMC_ERRLOCx
register being truncated to offset x = 21, causing error correction to
fail if more than 22 bit errors and if 24 or 32 bit error correction
was supported.
Fixes: d9c41bf30cf8 ("ARM: dts: at91: Declare EBI/NAND controllers")
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: <[email protected]> # 4.13.x
Acked-by: Alexander Dahl <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -413,7 +413,7 @@
pmecc: ecc-engine@f8014070 {
compatible = "atmel,sama5d2-pmecc";
reg = <0xf8014070 0x490>,
- <0xf8014500 0x100>;
+ <0xf8014500 0x200>;
};
};
From: Ben Dooks <[email protected]>
commit a382c757ec5ef83137a86125f43a4c43dc2ab50b upstream.
The fu740 PCIe core does not probe any devices on the SiFive Unmatched
board without this fix (or having U-Boot explicitly start the PCIe via
either boot-script or user command). The fix is to start the link at
2.5GT/s speeds and once the link is up then change the maximum speed back
to the default.
The U-Boot driver claims to set the link-speed to 2.5GT/s to get the probe
to work (and U-Boot does print link up at 2.5GT/s) in the following code:
https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/pci/pcie_dw_sifive.c?id=v2022.01#L271
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ben Dooks <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Dimitri John Ledkov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/dwc/pcie-fu740.c | 51 +++++++++++++++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/dwc/pcie-fu740.c
+++ b/drivers/pci/controller/dwc/pcie-fu740.c
@@ -181,10 +181,59 @@ static int fu740_pcie_start_link(struct
{
struct device *dev = pci->dev;
struct fu740_pcie *afp = dev_get_drvdata(dev);
+ u8 cap_exp = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+ int ret;
+ u32 orig, tmp;
+
+ /*
+ * Force 2.5GT/s when starting the link, due to some devices not
+ * probing at higher speeds. This happens with the PCIe switch
+ * on the Unmatched board when U-Boot has not initialised the PCIe.
+ * The fix in U-Boot is to force 2.5GT/s, which then gets cleared
+ * by the soft reset done by this driver.
+ */
+ dev_dbg(dev, "cap_exp at %x\n", cap_exp);
+ dw_pcie_dbi_ro_wr_en(pci);
+
+ tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP);
+ orig = tmp & PCI_EXP_LNKCAP_SLS;
+ tmp &= ~PCI_EXP_LNKCAP_SLS;
+ tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
+ dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp);
/* Enable LTSSM */
writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
- return 0;
+
+ ret = dw_pcie_wait_for_link(pci);
+ if (ret) {
+ dev_err(dev, "error: link did not start\n");
+ goto err;
+ }
+
+ tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP);
+ if ((tmp & PCI_EXP_LNKCAP_SLS) != orig) {
+ dev_dbg(dev, "changing speed back to original\n");
+
+ tmp &= ~PCI_EXP_LNKCAP_SLS;
+ tmp |= orig;
+ dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp);
+
+ tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+ tmp |= PORT_LOGIC_SPEED_CHANGE;
+ dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
+
+ ret = dw_pcie_wait_for_link(pci);
+ if (ret) {
+ dev_err(dev, "error: link did not start at new speed\n");
+ goto err;
+ }
+ }
+
+ ret = 0;
+err:
+ WARN_ON(ret); /* we assume that errors will be very rare */
+ dw_pcie_dbi_ro_wr_dis(pci);
+ return ret;
}
static int fu740_pcie_host_init(struct pcie_port *pp)
From: Sunil Goutham <[email protected]>
[ Upstream commit 680efb33546be8960ccbb2f4e0e43034d9c93b30 ]
This RNG device is present on Marvell OcteonTx2 silicons as well and
also provides entropy health status.
HW continuously checks health condition of entropy and reports
faults. Fault is in terms of co-processor cycles since last fault
detected. This doesn't get cleared and only updated when new fault
is detected. Also there are chances of detecting false positives.
So to detect a entropy failure SW has to check if failures are
persistent ie cycles elapsed is frequently updated by HW.
This patch adds support to detect health failures using below algo.
1. Consider any fault detected before 10ms as a false positive and ignore.
10ms is chosen randomly, no significance.
2. Upon first failure detection make a note of cycles elapsed and when this
error happened in realtime (cntvct).
3. Upon subsequent failure, check if this is new or a old one by comparing
current cycles with the ones since last failure. cycles or time since
last failure is calculated using cycles and time info captured at (2).
HEALTH_CHECK status register is not available to VF, hence had to map
PF registers. Also since cycles are in terms of co-processor cycles,
had to retrieve co-processor clock rate from RST device.
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hw_random/Kconfig | 2 +-
drivers/char/hw_random/cavium-rng-vf.c | 194 +++++++++++++++++++++++--
drivers/char/hw_random/cavium-rng.c | 11 +-
3 files changed, 190 insertions(+), 17 deletions(-)
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 239eca4d6805..d71c5f570932 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -414,7 +414,7 @@ config HW_RANDOM_MESON
config HW_RANDOM_CAVIUM
tristate "Cavium ThunderX Random Number Generator support"
- depends on HW_RANDOM && PCI && (ARM64 || (COMPILE_TEST && 64BIT))
+ depends on HW_RANDOM && PCI && ARM64
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
diff --git a/drivers/char/hw_random/cavium-rng-vf.c b/drivers/char/hw_random/cavium-rng-vf.c
index 3de4a6a443ef..6f66919652bf 100644
--- a/drivers/char/hw_random/cavium-rng-vf.c
+++ b/drivers/char/hw_random/cavium-rng-vf.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Hardware Random Number Generator support for Cavium, Inc.
- * Thunder processor family.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Hardware Random Number Generator support.
+ * Cavium Thunder, Marvell OcteonTx/Tx2 processor families.
*
* Copyright (C) 2016 Cavium, Inc.
*/
@@ -15,16 +12,146 @@
#include <linux/pci.h>
#include <linux/pci_ids.h>
+#include <asm/arch_timer.h>
+
+/* PCI device IDs */
+#define PCI_DEVID_CAVIUM_RNG_PF 0xA018
+#define PCI_DEVID_CAVIUM_RNG_VF 0xA033
+
+#define HEALTH_STATUS_REG 0x38
+
+/* RST device info */
+#define PCI_DEVICE_ID_RST_OTX2 0xA085
+#define RST_BOOT_REG 0x1600ULL
+#define CLOCK_BASE_RATE 50000000ULL
+#define MSEC_TO_NSEC(x) (x * 1000000)
+
struct cavium_rng {
struct hwrng ops;
void __iomem *result;
+ void __iomem *pf_regbase;
+ struct pci_dev *pdev;
+ u64 clock_rate;
+ u64 prev_error;
+ u64 prev_time;
};
+static inline bool is_octeontx(struct pci_dev *pdev)
+{
+ if (midr_is_cpu_model_range(read_cpuid_id(), MIDR_THUNDERX_83XX,
+ MIDR_CPU_VAR_REV(0, 0),
+ MIDR_CPU_VAR_REV(3, 0)) ||
+ midr_is_cpu_model_range(read_cpuid_id(), MIDR_THUNDERX_81XX,
+ MIDR_CPU_VAR_REV(0, 0),
+ MIDR_CPU_VAR_REV(3, 0)) ||
+ midr_is_cpu_model_range(read_cpuid_id(), MIDR_THUNDERX,
+ MIDR_CPU_VAR_REV(0, 0),
+ MIDR_CPU_VAR_REV(3, 0)))
+ return true;
+
+ return false;
+}
+
+static u64 rng_get_coprocessor_clkrate(void)
+{
+ u64 ret = CLOCK_BASE_RATE * 16; /* Assume 800Mhz as default */
+ struct pci_dev *pdev;
+ void __iomem *base;
+
+ pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM,
+ PCI_DEVICE_ID_RST_OTX2, NULL);
+ if (!pdev)
+ goto error;
+
+ base = pci_ioremap_bar(pdev, 0);
+ if (!base)
+ goto error_put_pdev;
+
+ /* RST: PNR_MUL * 50Mhz gives clockrate */
+ ret = CLOCK_BASE_RATE * ((readq(base + RST_BOOT_REG) >> 33) & 0x3F);
+
+ iounmap(base);
+
+error_put_pdev:
+ pci_dev_put(pdev);
+
+error:
+ return ret;
+}
+
+static int check_rng_health(struct cavium_rng *rng)
+{
+ u64 cur_err, cur_time;
+ u64 status, cycles;
+ u64 time_elapsed;
+
+
+ /* Skip checking health for OcteonTx */
+ if (!rng->pf_regbase)
+ return 0;
+
+ status = readq(rng->pf_regbase + HEALTH_STATUS_REG);
+ if (status & BIT_ULL(0)) {
+ dev_err(&rng->pdev->dev, "HWRNG: Startup health test failed\n");
+ return -EIO;
+ }
+
+ cycles = status >> 1;
+ if (!cycles)
+ return 0;
+
+ cur_time = arch_timer_read_counter();
+
+ /* RNM_HEALTH_STATUS[CYCLES_SINCE_HEALTH_FAILURE]
+ * Number of coprocessor cycles times 2 since the last failure.
+ * This field doesn't get cleared/updated until another failure.
+ */
+ cycles = cycles / 2;
+ cur_err = (cycles * 1000000000) / rng->clock_rate; /* In nanosec */
+
+ /* Ignore errors that happenned a long time ago, these
+ * are most likely false positive errors.
+ */
+ if (cur_err > MSEC_TO_NSEC(10)) {
+ rng->prev_error = 0;
+ rng->prev_time = 0;
+ return 0;
+ }
+
+ if (rng->prev_error) {
+ /* Calculate time elapsed since last error
+ * '1' tick of CNTVCT is 10ns, since it runs at 100Mhz.
+ */
+ time_elapsed = (cur_time - rng->prev_time) * 10;
+ time_elapsed += rng->prev_error;
+
+ /* Check if current error is a new one or the old one itself.
+ * If error is a new one then consider there is a persistent
+ * issue with entropy, declare hardware failure.
+ */
+ if (cur_err < time_elapsed) {
+ dev_err(&rng->pdev->dev, "HWRNG failure detected\n");
+ rng->prev_error = cur_err;
+ rng->prev_time = cur_time;
+ return -EIO;
+ }
+ }
+
+ rng->prev_error = cur_err;
+ rng->prev_time = cur_time;
+ return 0;
+}
+
/* Read data from the RNG unit */
static int cavium_rng_read(struct hwrng *rng, void *dat, size_t max, bool wait)
{
struct cavium_rng *p = container_of(rng, struct cavium_rng, ops);
unsigned int size = max;
+ int err = 0;
+
+ err = check_rng_health(p);
+ if (err)
+ return err;
while (size >= 8) {
*((u64 *)dat) = readq(p->result);
@@ -39,6 +166,39 @@ static int cavium_rng_read(struct hwrng *rng, void *dat, size_t max, bool wait)
return max;
}
+static int cavium_map_pf_regs(struct cavium_rng *rng)
+{
+ struct pci_dev *pdev;
+
+ /* Health status is not supported on 83xx, skip mapping PF CSRs */
+ if (is_octeontx(rng->pdev)) {
+ rng->pf_regbase = NULL;
+ return 0;
+ }
+
+ pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM,
+ PCI_DEVID_CAVIUM_RNG_PF, NULL);
+ if (!pdev) {
+ dev_err(&pdev->dev, "Cannot find RNG PF device\n");
+ return -EIO;
+ }
+
+ rng->pf_regbase = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!rng->pf_regbase) {
+ dev_err(&pdev->dev, "Failed to map PF CSR region\n");
+ pci_dev_put(pdev);
+ return -ENOMEM;
+ }
+
+ pci_dev_put(pdev);
+
+ /* Get co-processor clock rate */
+ rng->clock_rate = rng_get_coprocessor_clkrate();
+
+ return 0;
+}
+
/* Map Cavium RNG to an HWRNG object */
static int cavium_rng_probe_vf(struct pci_dev *pdev,
const struct pci_device_id *id)
@@ -50,6 +210,8 @@ static int cavium_rng_probe_vf(struct pci_dev *pdev,
if (!rng)
return -ENOMEM;
+ rng->pdev = pdev;
+
/* Map the RNG result */
rng->result = pcim_iomap(pdev, 0, 0);
if (!rng->result) {
@@ -67,6 +229,11 @@ static int cavium_rng_probe_vf(struct pci_dev *pdev,
pci_set_drvdata(pdev, rng);
+ /* Health status is available only at PF, hence map PF registers. */
+ ret = cavium_map_pf_regs(rng);
+ if (ret)
+ return ret;
+
ret = devm_hwrng_register(&pdev->dev, &rng->ops);
if (ret) {
dev_err(&pdev->dev, "Error registering device as HWRNG.\n");
@@ -76,10 +243,18 @@ static int cavium_rng_probe_vf(struct pci_dev *pdev,
return 0;
}
+/* Remove the VF */
+static void cavium_rng_remove_vf(struct pci_dev *pdev)
+{
+ struct cavium_rng *rng;
+
+ rng = pci_get_drvdata(pdev);
+ iounmap(rng->pf_regbase);
+}
static const struct pci_device_id cavium_rng_vf_id_table[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa033), 0, 0, 0},
- {0,},
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CAVIUM_RNG_VF) },
+ { 0, }
};
MODULE_DEVICE_TABLE(pci, cavium_rng_vf_id_table);
@@ -87,8 +262,9 @@ static struct pci_driver cavium_rng_vf_driver = {
.name = "cavium_rng_vf",
.id_table = cavium_rng_vf_id_table,
.probe = cavium_rng_probe_vf,
+ .remove = cavium_rng_remove_vf,
};
module_pci_driver(cavium_rng_vf_driver);
MODULE_AUTHOR("Omer Khaliq <[email protected]>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/hw_random/cavium-rng.c b/drivers/char/hw_random/cavium-rng.c
index 63d6e68c24d2..b96579222408 100644
--- a/drivers/char/hw_random/cavium-rng.c
+++ b/drivers/char/hw_random/cavium-rng.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Hardware Random Number Generator support for Cavium Inc.
- * Thunder processor family.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Hardware Random Number Generator support.
+ * Cavium Thunder, Marvell OcteonTx/Tx2 processor families.
*
* Copyright (C) 2016 Cavium, Inc.
*/
@@ -91,4 +88,4 @@ static struct pci_driver cavium_rng_pf_driver = {
module_pci_driver(cavium_rng_pf_driver);
MODULE_AUTHOR("Omer Khaliq <[email protected]>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
--
2.34.1
From: Eric Biggers <[email protected]>
commit 2abc9c246e0548e52985b10440c9ea3e9f65f793 upstream.
Most callers of public_key_verify_signature(), including most indirect
callers via verify_signature() as well as pkcs7_verify_sig_chain(),
don't check that public_key_signature::pkey_algo matches
public_key::pkey_algo. These should always match. However, a malicious
signature could intentionally declare an unintended algorithm. It is
essential that such signatures be rejected outright, or that the
algorithm of the *key* be used -- not the algorithm of the signature as
that would allow attackers to choose the algorithm used.
Currently, public_key_verify_signature() correctly uses the key's
algorithm when deciding which akcipher to allocate. That's good.
However, it uses the signature's algorithm when deciding whether to do
the first step of SM2, which is incorrect. Also, v4.19 and older
kernels used the signature's algorithm for the entire process.
Prevent such errors by making public_key_verify_signature() enforce that
the signature's algorithm (if given) matches the key's algorithm.
Also remove two checks of this done by callers, which are now redundant.
Cc: [email protected]
Tested-by: Stefan Berger <[email protected]>
Tested-by: Tianjia Zhang <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Vitaly Chikunov <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/asymmetric_keys/pkcs7_verify.c | 6 ------
crypto/asymmetric_keys/public_key.c | 15 +++++++++++++++
crypto/asymmetric_keys/x509_public_key.c | 6 ------
3 files changed, 15 insertions(+), 12 deletions(-)
--- a/crypto/asymmetric_keys/pkcs7_verify.c
+++ b/crypto/asymmetric_keys/pkcs7_verify.c
@@ -174,12 +174,6 @@ static int pkcs7_find_key(struct pkcs7_m
pr_devel("Sig %u: Found cert serial match X.509[%u]\n",
sinfo->index, certix);
- if (strcmp(x509->pub->pkey_algo, sinfo->sig->pkey_algo) != 0) {
- pr_warn("Sig %u: X.509 algo and PKCS#7 sig algo don't match\n",
- sinfo->index);
- continue;
- }
-
sinfo->signer = x509;
return 0;
}
--- a/crypto/asymmetric_keys/public_key.c
+++ b/crypto/asymmetric_keys/public_key.c
@@ -325,6 +325,21 @@ int public_key_verify_signature(const st
BUG_ON(!sig);
BUG_ON(!sig->s);
+ /*
+ * If the signature specifies a public key algorithm, it *must* match
+ * the key's actual public key algorithm.
+ *
+ * Small exception: ECDSA signatures don't specify the curve, but ECDSA
+ * keys do. So the strings can mismatch slightly in that case:
+ * "ecdsa-nist-*" for the key, but "ecdsa" for the signature.
+ */
+ if (sig->pkey_algo) {
+ if (strcmp(pkey->pkey_algo, sig->pkey_algo) != 0 &&
+ (strncmp(pkey->pkey_algo, "ecdsa-", 6) != 0 ||
+ strcmp(sig->pkey_algo, "ecdsa") != 0))
+ return -EKEYREJECTED;
+ }
+
ret = software_key_determine_akcipher(sig->encoding,
sig->hash_algo,
pkey, alg_name);
--- a/crypto/asymmetric_keys/x509_public_key.c
+++ b/crypto/asymmetric_keys/x509_public_key.c
@@ -128,12 +128,6 @@ int x509_check_for_self_signed(struct x5
goto out;
}
- ret = -EKEYREJECTED;
- if (strcmp(cert->pub->pkey_algo, cert->sig->pkey_algo) != 0 &&
- (strncmp(cert->pub->pkey_algo, "ecdsa-", 6) != 0 ||
- strcmp(cert->sig->pkey_algo, "ecdsa") != 0))
- goto out;
-
ret = public_key_verify_signature(cert->pub, cert->sig);
if (ret < 0) {
if (ret == -ENOPKG) {
From: Adrian Hunter <[email protected]>
commit af4edb1d50c6d1044cb34bc43621411b7ba2cffe upstream.
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen are arguably
unnecessary, so add a flag to suppress them. This flag is used by the UFS
driver.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_error.c | 9 +++++++--
drivers/scsi/sd.c | 6 ++++--
include/scsi/scsi_device.h | 1 +
3 files changed, 12 insertions(+), 4 deletions(-)
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -485,8 +485,13 @@ static void scsi_report_sense(struct scs
if (sshdr->asc == 0x29) {
evt_type = SDEV_EVT_POWER_ON_RESET_OCCURRED;
- sdev_printk(KERN_WARNING, sdev,
- "Power-on or device reset occurred\n");
+ /*
+ * Do not print message if it is an expected side-effect
+ * of runtime PM.
+ */
+ if (!sdev->silence_suspend)
+ sdev_printk(KERN_WARNING, sdev,
+ "Power-on or device reset occurred\n");
}
if (sshdr->asc == 0x2a && sshdr->ascq == 0x01) {
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3628,7 +3628,8 @@ static int sd_suspend_common(struct devi
return 0;
if (sdkp->WCE && sdkp->media_present) {
- sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
+ if (!sdkp->device->silence_suspend)
+ sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
ret = sd_sync_cache(sdkp, &sshdr);
if (ret) {
@@ -3650,7 +3651,8 @@ static int sd_suspend_common(struct devi
}
if (sdkp->device->manage_start_stop) {
- sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+ if (!sdkp->device->silence_suspend)
+ sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
/* an error is not worth aborting a system sleep */
ret = sd_start_stop_device(sdkp, 0);
if (ignore_stop_errors)
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -206,6 +206,7 @@ struct scsi_device {
unsigned rpm_autosuspend:1; /* Enable runtime autosuspend at device
* creation time */
unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
+ unsigned silence_suspend:1; /* Do not print runtime PM related messages */
bool offline_already; /* Device offline message logged */
From: Krzysztof Kozlowski <[email protected]>
commit 801109b1a37ad99784e6370cc7e462596f505ea3 upstream.
The usb-device.yaml reference is absolute so it should use /schemas part
in path.
Fixes: 23bf6fc7046c ("dt-bindings: usb: convert usb-device.txt to YAML schema")
Cc: <[email protected]>
Reported-by: Rob Herring <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -33,7 +33,7 @@ patternProperties:
"^.*@[0-9a-f]{1,2}$":
description: The hard wired USB devices
type: object
- $ref: /usb/usb-device.yaml
+ $ref: /schemas/usb/usb-device.yaml
additionalProperties: true
From: Stefano Garzarella <[email protected]>
[ Upstream commit 32f1b53fe8f03d962423ba81f8e92af5839814da ]
virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock`
is not initialized.
Let's initialize it in vdev_info_init().
Signed-off-by: Stefano Garzarella <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/virtio/virtio_test.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c
index cb3f29c09aff..23f142af544a 100644
--- a/tools/virtio/virtio_test.c
+++ b/tools/virtio/virtio_test.c
@@ -130,6 +130,7 @@ static void vdev_info_init(struct vdev_info* dev, unsigned long long features)
memset(dev, 0, sizeof *dev);
dev->vdev.features = features;
INIT_LIST_HEAD(&dev->vdev.vqs);
+ spin_lock_init(&dev->vdev.vqs_list_lock);
dev->buf_size = 1024;
dev->buf = malloc(dev->buf_size);
assert(dev->buf);
--
2.34.1
From: Alexander Usyskin <[email protected]>
commit ccdf6f806fbf559f7c29ed9302a7c1b4da7fd37f upstream.
Add a quirk to disable MEI interface on Intel PCH Ignition (IGN)
as the IGN firmware doesn't support the protocol.
Cc: <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/mei/hw-me-regs.h | 1 +
drivers/misc/mei/hw-me.c | 23 ++++++++++++-----------
2 files changed, 13 insertions(+), 11 deletions(-)
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -120,6 +120,7 @@
#define PCI_CFG_HFS_2 0x48
#define PCI_CFG_HFS_3 0x60
# define PCI_CFG_HFS_3_FW_SKU_MSK 0x00000070
+# define PCI_CFG_HFS_3_FW_SKU_IGN 0x00000000
# define PCI_CFG_HFS_3_FW_SKU_SPS 0x00000060
#define PCI_CFG_HFS_4 0x64
#define PCI_CFG_HFS_5 0x68
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -1405,16 +1405,16 @@ static bool mei_me_fw_type_sps_4(const s
.quirk_probe = mei_me_fw_type_sps_4
/**
- * mei_me_fw_type_sps() - check for sps sku
+ * mei_me_fw_type_sps_ign() - check for sps or ign sku
*
- * Read ME FW Status register to check for SPS Firmware.
- * The SPS FW is only signaled in pci function 0
+ * Read ME FW Status register to check for SPS or IGN Firmware.
+ * The SPS/IGN FW is only signaled in pci function 0
*
* @pdev: pci device
*
- * Return: true in case of SPS firmware
+ * Return: true in case of SPS/IGN firmware
*/
-static bool mei_me_fw_type_sps(const struct pci_dev *pdev)
+static bool mei_me_fw_type_sps_ign(const struct pci_dev *pdev)
{
u32 reg;
u32 fw_type;
@@ -1427,14 +1427,15 @@ static bool mei_me_fw_type_sps(const str
dev_dbg(&pdev->dev, "fw type is %d\n", fw_type);
- return fw_type == PCI_CFG_HFS_3_FW_SKU_SPS;
+ return fw_type == PCI_CFG_HFS_3_FW_SKU_IGN ||
+ fw_type == PCI_CFG_HFS_3_FW_SKU_SPS;
}
#define MEI_CFG_KIND_ITOUCH \
.kind = "itouch"
-#define MEI_CFG_FW_SPS \
- .quirk_probe = mei_me_fw_type_sps
+#define MEI_CFG_FW_SPS_IGN \
+ .quirk_probe = mei_me_fw_type_sps_ign
#define MEI_CFG_FW_VER_SUPP \
.fw_ver_supported = 1
@@ -1535,7 +1536,7 @@ static const struct mei_cfg mei_me_pch12
MEI_CFG_PCH8_HFS,
MEI_CFG_FW_VER_SUPP,
MEI_CFG_DMA_128,
- MEI_CFG_FW_SPS,
+ MEI_CFG_FW_SPS_IGN,
};
/* Cannon Lake itouch with quirk for SPS 5.0 and newer Firmware exclusion
@@ -1545,7 +1546,7 @@ static const struct mei_cfg mei_me_pch12
MEI_CFG_KIND_ITOUCH,
MEI_CFG_PCH8_HFS,
MEI_CFG_FW_VER_SUPP,
- MEI_CFG_FW_SPS,
+ MEI_CFG_FW_SPS_IGN,
};
/* Tiger Lake and newer devices */
@@ -1562,7 +1563,7 @@ static const struct mei_cfg mei_me_pch15
MEI_CFG_FW_VER_SUPP,
MEI_CFG_DMA_128,
MEI_CFG_TRC,
- MEI_CFG_FW_SPS,
+ MEI_CFG_FW_SPS_IGN,
};
/*
From: Miquel Raynal <[email protected]>
commit 5fd6739e0df7e320bcac103dfb95fe75941fea17 upstream.
By working with external hardware ECC engines, we figured out that
Under certain circumstances, it is needed for the SPI controller to
check INT_TX_EMPTY and INT_RX_NOT_EMPTY in both receive and transmit
path (not only in the receive path). The delay penalty being
negligible, move this code in the common path.
Fixes: b942d80b0a39 ("spi: Add MXIC controller driver")
Cc: [email protected]
Suggested-by: Mason Yang <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Zhengxun Li <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-mxic.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
--- a/drivers/spi/spi-mxic.c
+++ b/drivers/spi/spi-mxic.c
@@ -304,25 +304,21 @@ static int mxic_spi_data_xfer(struct mxi
writel(data, mxic->regs + TXD(nbytes % 4));
- if (rxbuf) {
- ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
- sts & INT_TX_EMPTY, 0,
- USEC_PER_SEC);
- if (ret)
- return ret;
+ ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+ sts & INT_TX_EMPTY, 0, USEC_PER_SEC);
+ if (ret)
+ return ret;
- ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
- sts & INT_RX_NOT_EMPTY, 0,
- USEC_PER_SEC);
- if (ret)
- return ret;
+ ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+ sts & INT_RX_NOT_EMPTY, 0,
+ USEC_PER_SEC);
+ if (ret)
+ return ret;
- data = readl(mxic->regs + RXD);
+ data = readl(mxic->regs + RXD);
+ if (rxbuf) {
data >>= (8 * (4 - nbytes));
memcpy(rxbuf + pos, &data, nbytes);
- WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
- } else {
- readl(mxic->regs + RXD);
}
WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
From: Mathias Nyman <[email protected]>
commit 14073ce951b5919da450022c050772902f24f054 upstream.
xhci_reset() timeout was increased from 250ms to 10 seconds in order to
give Renesas 720201 xHC enough time to get ready in probe.
xhci_reset() is called with interrupts disabled in other places, and
waiting for 10 seconds there is not acceptable.
Add a timeout parameter to xhci_reset(), and adjust it back to 250ms
when called from xhci_stop() or xhci_shutdown() where interrupts are
disabled, and successful reset isn't that critical.
This solves issues when deactivating host mode on platforms like SM8450.
For now don't change the timeout if xHC is reset in xhci_resume().
No issues are reported for it, and we need the reset to succeed.
Locking around that reset needs to be revisited later.
Additionally change the signed integer timeout parameter in
xhci_handshake() to a u64 to match the timeout value we pass to
readl_poll_timeout_atomic()
Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.")
Cc: [email protected]
Reported-by: Sergey Shtylyov <[email protected]>
Reported-by: Pavan Kondeti <[email protected]>
Tested-by: Pavan Kondeti <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci-mem.c | 2 +-
drivers/usb/host/xhci.c | 20 +++++++++-----------
drivers/usb/host/xhci.h | 7 +++++--
4 files changed, 16 insertions(+), 15 deletions(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -762,7 +762,7 @@ static int xhci_exit_test_mode(struct xh
}
pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
xhci->test_mode = 0;
- return xhci_reset(xhci);
+ return xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
}
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2583,7 +2583,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,
fail:
xhci_halt(xhci);
- xhci_reset(xhci);
+ xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
xhci_mem_cleanup(xhci);
return -ENOMEM;
}
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -65,7 +65,7 @@ static bool td_on_ring(struct xhci_td *t
* handshake done). There are two failure modes: "usec" have passed (major
* hardware flakeout), or the register reads as all-ones (hardware removed).
*/
-int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us)
{
u32 result;
int ret;
@@ -73,7 +73,7 @@ int xhci_handshake(void __iomem *ptr, u3
ret = readl_poll_timeout_atomic(ptr, result,
(result & mask) == done ||
result == U32_MAX,
- 1, usec);
+ 1, timeout_us);
if (result == U32_MAX) /* card removed */
return -ENODEV;
@@ -162,7 +162,7 @@ int xhci_start(struct xhci_hcd *xhci)
* Transactions will be terminated immediately, and operational registers
* will be set to their defaults.
*/
-int xhci_reset(struct xhci_hcd *xhci)
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us)
{
u32 command;
u32 state;
@@ -195,8 +195,7 @@ int xhci_reset(struct xhci_hcd *xhci)
if (xhci->quirks & XHCI_INTEL_HOST)
udelay(1000);
- ret = xhci_handshake(&xhci->op_regs->command,
- CMD_RESET, 0, 10 * 1000 * 1000);
+ ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us);
if (ret)
return ret;
@@ -209,8 +208,7 @@ int xhci_reset(struct xhci_hcd *xhci)
* xHCI cannot write to any doorbells or operational registers other
* than status until the "Controller Not Ready" flag is cleared.
*/
- ret = xhci_handshake(&xhci->op_regs->status,
- STS_CNR, 0, 10 * 1000 * 1000);
+ ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, timeout_us);
xhci->usb2_rhub.bus_state.port_c_suspend = 0;
xhci->usb2_rhub.bus_state.suspended_ports = 0;
@@ -731,7 +729,7 @@ static void xhci_stop(struct usb_hcd *hc
xhci->xhc_state |= XHCI_STATE_HALTED;
xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
xhci_halt(xhci);
- xhci_reset(xhci);
+ xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
spin_unlock_irq(&xhci->lock);
xhci_cleanup_msix(xhci);
@@ -784,7 +782,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
xhci_halt(xhci);
/* Workaround for spurious wakeups at shutdown with HSW */
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
- xhci_reset(xhci);
+ xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
spin_unlock_irq(&xhci->lock);
xhci_cleanup_msix(xhci);
@@ -1170,7 +1168,7 @@ int xhci_resume(struct xhci_hcd *xhci, b
xhci_dbg(xhci, "Stop HCD\n");
xhci_halt(xhci);
xhci_zero_64b_regs(xhci);
- retval = xhci_reset(xhci);
+ retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
spin_unlock_irq(&xhci->lock);
if (retval)
return retval;
@@ -5318,7 +5316,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,
xhci_dbg(xhci, "Resetting HCD\n");
/* Reset the internal HC memory state and registers. */
- retval = xhci_reset(xhci);
+ retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
if (retval)
return retval;
xhci_dbg(xhci, "Reset complete\n");
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -229,6 +229,9 @@ struct xhci_op_regs {
#define CMD_ETE (1 << 14)
/* bits 15:31 are reserved (and should be preserved on writes). */
+#define XHCI_RESET_LONG_USEC (10 * 1000 * 1000)
+#define XHCI_RESET_SHORT_USEC (250 * 1000)
+
/* IMAN - Interrupt Management Register */
#define IMAN_IE (1 << 1)
#define IMAN_IP (1 << 0)
@@ -2083,11 +2086,11 @@ void xhci_free_container_ctx(struct xhci
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
-int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us);
void xhci_quiesce(struct xhci_hcd *xhci);
int xhci_halt(struct xhci_hcd *xhci);
int xhci_start(struct xhci_hcd *xhci);
-int xhci_reset(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us);
int xhci_run(struct usb_hcd *hcd);
int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
void xhci_shutdown(struct usb_hcd *hcd);
From: Christian König <[email protected]>
commit 721255b52700b320c4ae2e23d57f7d9ad1db50b9 upstream.
It is illegal to add a dma_fence_chain as timeline point. Flatten out
the fences into a dma_fence_array instead.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Cc: <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_syncobj.c | 61 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 56 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/drm_syncobj.c
+++ b/drivers/gpu/drm/drm_syncobj.c
@@ -853,12 +853,57 @@ drm_syncobj_fd_to_handle_ioctl(struct dr
&args->handle);
}
+
+/*
+ * Try to flatten a dma_fence_chain into a dma_fence_array so that it can be
+ * added as timeline fence to a chain again.
+ */
+static int drm_syncobj_flatten_chain(struct dma_fence **f)
+{
+ struct dma_fence_chain *chain = to_dma_fence_chain(*f);
+ struct dma_fence *tmp, **fences;
+ struct dma_fence_array *array;
+ unsigned int count;
+
+ if (!chain)
+ return 0;
+
+ count = 0;
+ dma_fence_chain_for_each(tmp, &chain->base)
+ ++count;
+
+ fences = kmalloc_array(count, sizeof(*fences), GFP_KERNEL);
+ if (!fences)
+ return -ENOMEM;
+
+ count = 0;
+ dma_fence_chain_for_each(tmp, &chain->base)
+ fences[count++] = dma_fence_get(tmp);
+
+ array = dma_fence_array_create(count, fences,
+ dma_fence_context_alloc(1),
+ 1, false);
+ if (!array)
+ goto free_fences;
+
+ dma_fence_put(*f);
+ *f = &array->base;
+ return 0;
+
+free_fences:
+ while (count--)
+ dma_fence_put(fences[count]);
+
+ kfree(fences);
+ return -ENOMEM;
+}
+
static int drm_syncobj_transfer_to_timeline(struct drm_file *file_private,
struct drm_syncobj_transfer *args)
{
struct drm_syncobj *timeline_syncobj = NULL;
- struct dma_fence *fence;
struct dma_fence_chain *chain;
+ struct dma_fence *fence;
int ret;
timeline_syncobj = drm_syncobj_find(file_private, args->dst_handle);
@@ -869,16 +914,22 @@ static int drm_syncobj_transfer_to_timel
args->src_point, args->flags,
&fence);
if (ret)
- goto err;
+ goto err_put_timeline;
+
+ ret = drm_syncobj_flatten_chain(&fence);
+ if (ret)
+ goto err_free_fence;
+
chain = dma_fence_chain_alloc();
if (!chain) {
ret = -ENOMEM;
- goto err1;
+ goto err_free_fence;
}
+
drm_syncobj_add_point(timeline_syncobj, chain, fence, args->dst_point);
-err1:
+err_free_fence:
dma_fence_put(fence);
-err:
+err_put_timeline:
drm_syncobj_put(timeline_syncobj);
return ret;
From: Mastan Katragadda <[email protected]>
commit 3886a86e7e6cc6ce2ce93c440fecd8f42aed0ce7 upstream.
A missing bounds check in vm_access() can lead to an out-of-bounds read
or write in the adjacent memory area, since the len attribute is not
validated before the memcpy later in the function, potentially hitting:
[ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000
[ 183.637934] #PF: supervisor read access in kernel mode
[ 183.637997] #PF: error_code(0x0000) - not-present page
[ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0
[ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI
[ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1
[ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019
[ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10
[ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246
[ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc
[ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004
[ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000
[ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000
[ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000
[ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000
[ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0
[ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 183.650142] Call Trace:
[ 183.650988] <TASK>
[ 183.651793] vm_access+0x1f0/0x2a0 [i915]
[ 183.652726] __access_remote_vm+0x224/0x380
[ 183.653561] mem_rw.isra.0+0xf9/0x190
[ 183.654402] vfs_read+0x9d/0x1b0
[ 183.655238] ksys_read+0x63/0xe0
[ 183.656065] do_syscall_64+0x38/0xc0
[ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 183.657663] RIP: 0033:0x7fe5ef725142
[ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142
[ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005
[ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046
[ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0
[ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000
Changes since v1:
- Updated if condition with range_overflows_t [Chris Wilson]
Fixes: 9f909e215fea ("drm/i915: Implement vm_ops->access for gdb access into mmaps")
Signed-off-by: Mastan Katragadda <[email protected]>
Suggested-by: Adam Zabrocki <[email protected]>
Reported-by: Jackson Cody <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Jon Bloomfield <[email protected]>
Cc: Sudeep Dutt <[email protected]>
Cc: <[email protected]> # v5.8+
Reviewed-by: Matthew Auld <[email protected]>
[mauld: tidy up the commit message and add Cc: stable]
Signed-off-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/gem/i915_gem_mman.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_mman.c
@@ -438,7 +438,7 @@ vm_access(struct vm_area_struct *area, u
return -EACCES;
addr -= area->vm_start;
- if (addr >= obj->base.size)
+ if (range_overflows_t(u64, addr, len, obj->base.size))
return -EINVAL;
i915_gem_ww_ctx_init(&ww, true);
From: Liam Beguin <[email protected]>
commit 14b457fdde38de594a4bc4bd9075019319d978da upstream.
When a consumer calls iio_read_channel_processed() and no channel scale
is available, it's assumed that the scale is one and the raw value is
returned as expected.
On the other hand, if the consumer calls iio_convert_raw_to_processed()
the scaling factor requested by the consumer is not applied.
This for example causes the consumer to process mV when expecting uV.
Make sure to always apply the scaling factor requested by the consumer.
Fixes: adc8ec5ff183 ("iio: inkern: pass through raw values if no scaling")
Signed-off-by: Liam Beguin <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/inkern.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -590,10 +590,10 @@ static int iio_convert_raw_to_processed_
IIO_CHAN_INFO_SCALE);
if (scale_type < 0) {
/*
- * Just pass raw values as processed if no scaling is
- * available.
+ * If no channel scaling is available apply consumer scale to
+ * raw value and return.
*/
- *processed = raw;
+ *processed = raw * scale;
return 0;
}
From: Jiasheng Jiang <[email protected]>
[ Upstream commit e25a89f743b18c029bfbe5e1663ae0c7190912b0 ]
The return value of devm_kzalloc() needs to be checked.
To avoid use of null pointer in case of thefailure of alloc.
Fixes: 46233e91fa24 ("media: mtk-vcodec: move firmware implementations into their own files")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Tzung-Bi Shih <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
index cd27f637dbe7..cfc7ebed8fb7 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
@@ -102,6 +102,8 @@ struct mtk_vcodec_fw *mtk_vcodec_fw_vpu_init(struct mtk_vcodec_dev *dev,
vpu_wdt_reg_handler(fw_pdev, mtk_vcodec_vpu_reset_handler, dev, rst_id);
fw = devm_kzalloc(&dev->plat_dev->dev, sizeof(*fw), GFP_KERNEL);
+ if (!fw)
+ return ERR_PTR(-ENOMEM);
fw->type = VPU;
fw->ops = &mtk_vcodec_vpu_msg;
fw->pdev = fw_pdev;
--
2.34.1
From: Liam Beguin <[email protected]>
commit 1bca97ff95c732a516ebb68da72814194980e0a5 upstream.
When a consumer calls iio_read_channel_processed() and the channel has
an integer scale, the scale channel scale is applied and the processed
value is returned as expected.
On the other hand, if the consumer calls iio_convert_raw_to_processed()
the scaling factor requested by the consumer is not applied.
This for example causes the consumer to process mV when expecting uV.
Make sure to always apply the scaling factor requested by the consumer.
Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Liam Beguin <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/inkern.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -599,7 +599,7 @@ static int iio_convert_raw_to_processed_
switch (scale_type) {
case IIO_VAL_INT:
- *processed = raw64 * scale_val;
+ *processed = raw64 * scale_val * scale;
break;
case IIO_VAL_INT_PLUS_MICRO:
if (scale_val2 < 0)
From: Krzysztof Kozlowski <[email protected]>
commit 60a9914cb2061ba612a3f14f6ad329912b486360 upstream.
Add required VDD supplies to HDMI block on SMDK5250. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale 5250 board (voltage matches).
Cc: <[email protected]> # v3.15+
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
status = "okay";
ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
};
&i2c_0 {
From: Yosry Ahmed <[email protected]>
[ Upstream commit 1c4debc443ef7037dcb7c4f08c33b9caebd21d2e ]
When building the vm selftests using clang, some errors are seen due to
having headers in the compilation command:
clang -Wall -I ../../../../usr/include -no-pie gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o .../tools/testing/selftests/vm/gup_test
clang: error: cannot specify -o when generating multiple output files
make[1]: *** [../lib.mk:146: .../tools/testing/selftests/vm/gup_test] Error 1
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yosry Ahmed <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/vm/Makefile | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index d9605bd10f2d..acf5eaeef9ff 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -1,6 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for vm selftests
+LOCAL_HDRS += $(selfdir)/vm/local_config.h $(top_srcdir)/mm/gup_test.h
+
include local_config.mk
uname_M := $(shell uname -m 2>/dev/null || echo not)
@@ -139,10 +141,6 @@ endif
$(OUTPUT)/mlock-random-test $(OUTPUT)/memfd_secret: LDLIBS += -lcap
-$(OUTPUT)/gup_test: ../../../../mm/gup_test.h
-
-$(OUTPUT)/hmm-tests: local_config.h
-
# HMM_EXTRA_LIBS may get set in local_config.mk, or it may be left empty.
$(OUTPUT)/hmm-tests: LDLIBS += $(HMM_EXTRA_LIBS)
--
2.34.1
From: Lyude Paul <[email protected]>
commit 6b0076540faffd47f5a899bf12f3528c4f0e726b upstream.
It seems that some laptops will report having both an eDP and LVDS
connector, even though only the LVDS connector is actually hooked up. This
can lead to issues with backlight registration if the eDP connector ends up
getting registered before the LVDS connector, as the backlight device will
then be registered to the eDP connector instead of the LVDS connector.
So, fix this by only registering the backlight on connectors that are
reported as being connected.
Signed-off-by: Lyude Paul <[email protected]>
Fixes: 6eca310e8924 ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
Bugzilla: https://gitlab.freedesktop.org/drm/nouveau/-/issues/137
Cc: <[email protected]> # v5.15+
Reviewed-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_backlight.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -294,7 +294,8 @@ nv50_backlight_init(struct nouveau_backl
struct nouveau_drm *drm = nouveau_drm(nv_encoder->base.base.dev);
struct nvif_object *device = &drm->client.device.object;
- if (!nvif_rd32(device, NV50_PDISP_SOR_PWM_CTL(ffs(nv_encoder->dcb->or) - 1)))
+ if (!nvif_rd32(device, NV50_PDISP_SOR_PWM_CTL(ffs(nv_encoder->dcb->or) - 1)) ||
+ nv_conn->base.status != connector_status_connected)
return -ENODEV;
if (nv_conn->type == DCB_CONNECTOR_eDP) {
From: Paulo Alcantara <[email protected]>
commit b92e358757b91c2827af112cae9af513f26a3f34 upstream.
When calling smb2_ioctl_query_info() with
smb_query_info::flags=PASSTHRU_FSCTL and
smb_query_info::output_buffer_length=0, the following would return
0x10
buffer = memdup_user(arg + sizeof(struct smb_query_info),
qi.output_buffer_length);
if (IS_ERR(buffer)) {
kfree(vars);
return PTR_ERR(buffer);
}
rather than a valid pointer thus making IS_ERR() check fail. This
would then cause a NULL ptr deference in @buffer when accessing it
later in smb2_ioctl_query_ioctl(). While at it, prevent having a
@buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO
FileEndOfFileInformation requests when
smb_query_info::flags=PASSTHRU_SET_INFO.
Here is a small C reproducer which triggers a NULL ptr in @buffer when
passing an invalid smb_query_info::flags
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define die(s) perror(s), exit(1)
#define QUERY_INFO 0xc018cf07
int main(int argc, char *argv[])
{
int fd;
if (argc < 2)
exit(1);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
die("open");
if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
die("ioctl");
close(fd);
return 0;
}
mount.cifs //srv/share /mnt -o ...
gcc repro.c && ./a.out /mnt/f0
[ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1
[ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
[ 114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
[ 114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
[ 114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
[ 114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
[ 114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000
[ 114.144852] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000
[ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0
[ 114.146131] Call Trace:
[ 114.146291] <TASK>
[ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs]
[ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs]
[ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
[ 114.147775] ? dentry_path_raw+0xa6/0xf0
[ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
[ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs]
[ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs]
[ 114.149371] ? lock_downgrade+0x6f0/0x6f0
[ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs]
[ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0
[ 114.150562] ? __up_read+0x192/0x710
[ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0
[ 114.151025] ? __x64_sys_openat+0x11f/0x1d0
[ 114.151296] __x64_sys_ioctl+0x127/0x190
[ 114.151549] do_syscall_64+0x3b/0x90
[ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 114.152079] RIP: 0033:0x7f7aead043df
[ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 114.153431] RSP: 002b:00007ffc2e0c1f80 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 114.153890] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7aead043df
[ 114.154315] RDX: 00007ffc2e0c1ff0 RSI: 00000000c018cf07 RDI: 0000000000000003
[ 114.154747] RBP: 00007ffc2e0c2010 R08: 00007f7aeae03db0 R09: 00007f7aeae24c4e
[ 114.155192] R10: 00007f7aeabf7d40 R11: 0000000000000246 R12: 00007ffc2e0c2128
[ 114.155642] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007f7aeae57000
[ 114.156071] </TASK>
[ 114.156218] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload
[ 114.156608] ---[ end trace 0000000000000000 ]---
[ 114.156898] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.157792] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.159293] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
[ 114.159641] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
[ 114.160093] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
[ 114.160699] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
[ 114.161196] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
[ 114.155642] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007f7aeae57000
[ 114.156071] </TASK>
[ 114.156218] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload
[ 114.156608] ---[ end trace 0000000000000000 ]---
[ 114.156898] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.157792] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.159293] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
[ 114.159641] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
[ 114.160093] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
[ 114.160699] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
[ 114.161196] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
[ 114.161823] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000
[ 114.162274] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000
[ 114.162853] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 114.163218] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0
[ 114.163691] Kernel panic - not syncing: Fatal exception
[ 114.164087] Kernel Offset: disabled
[ 114.164316] ---[ end Kernel panic - not syncing: Fatal exception ]---
Cc: [email protected]
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1656,11 +1656,12 @@ smb2_ioctl_query_info(const unsigned int
if (smb3_encryption_required(tcon))
flags |= CIFS_TRANSFORM_REQ;
- buffer = memdup_user(arg + sizeof(struct smb_query_info),
- qi.output_buffer_length);
- if (IS_ERR(buffer)) {
- kfree(vars);
- return PTR_ERR(buffer);
+ if (qi.output_buffer_length) {
+ buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length);
+ if (IS_ERR(buffer)) {
+ kfree(vars);
+ return PTR_ERR(buffer);
+ }
}
/* Open */
@@ -1723,10 +1724,13 @@ smb2_ioctl_query_info(const unsigned int
/* Can eventually relax perm check since server enforces too */
if (!capable(CAP_SYS_ADMIN))
rc = -EPERM;
- else {
+ else if (qi.output_buffer_length < 8)
+ rc = -EINVAL;
+ else {
rqst[1].rq_iov = &vars->si_iov[0];
rqst[1].rq_nvec = 1;
+ /* MS-FSCC 2.4.13 FileEndOfFileInformation */
size[0] = 8;
data[0] = buffer;
From: Miaohe Lin <[email protected]>
commit e97824ff663ce3509fe040431c713182c2f058b1 upstream.
user_shm_lock forgets to set allowed to 0 when get_ucounts fails. So the
later user_shm_unlock might do the extra dec_rlimit_ucounts. Also in the
RLIM_INFINITY case, user_shm_lock will success regardless of the value of
memlock where memblock == LONG_MAX && !capable(CAP_IPC_LOCK) should fail.
Fix all of these by changing the code to leave lock_limit at ULONG_MAX aka
RLIM_INFINITY, leave "allowed" initialized to 0 and remove the special case
of RLIM_INFINITY as nothing can be greater than ULONG_MAX.
Credit goes to Eric W. Biederman for proposing simplifying the code and
thus catching the later bug.
Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: [email protected]
v1: https://lkml.kernel.org/r/[email protected]
v2: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mlock.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -826,13 +826,12 @@ int user_shm_lock(size_t size, struct uc
locked = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
lock_limit = rlimit(RLIMIT_MEMLOCK);
- if (lock_limit == RLIM_INFINITY)
- allowed = 1;
- lock_limit >>= PAGE_SHIFT;
+ if (lock_limit != RLIM_INFINITY)
+ lock_limit >>= PAGE_SHIFT;
spin_lock(&shmlock_user_lock);
memlock = inc_rlimit_ucounts(ucounts, UCOUNT_RLIMIT_MEMLOCK, locked);
- if (!allowed && (memlock == LONG_MAX || memlock > lock_limit) && !capable(CAP_IPC_LOCK)) {
+ if ((memlock == LONG_MAX || memlock > lock_limit) && !capable(CAP_IPC_LOCK)) {
dec_rlimit_ucounts(ucounts, UCOUNT_RLIMIT_MEMLOCK, locked);
goto out;
}
From: Maulik Shah <[email protected]>
[ Upstream commit 17ac8af678b6da6a8f1df7da8ebf2c5198741827 ]
Correct the TCS config by updating the number of TCSes for each type.
Cc: [email protected]
Fixes: d8cf9372b654 ("arm64: dts: qcom: sm8150: Add apps shared nodes")
Signed-off-by: Maulik Shah <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ef0232c2cf45..f347f752d536 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3434,9 +3434,9 @@
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <2>;
qcom,tcs-config = <ACTIVE_TCS 2>,
- <SLEEP_TCS 1>,
- <WAKE_TCS 1>,
- <CONTROL_TCS 0>;
+ <SLEEP_TCS 3>,
+ <WAKE_TCS 3>,
+ <CONTROL_TCS 1>;
rpmhcc: clock-controller {
compatible = "qcom,sm8150-rpmh-clk";
--
2.34.1
From: Yonglin Tan <[email protected]>
commit 2413ffbf19a95cfcd7adf63135c5a9343a66d0a2 upstream.
For default mechanism, the driver uses default MRU 3500 if mru_default
is not initialized. The Qualcomm configured the MRU size to 32768 in the
WWAN device FW. So, we align the driver setting with Qualcomm FW setting.
Link: https://lore.kernel.org/r/MEYP282MB2374EE345DADDB591AFDA6AFFD2E9@MEYP282MB2374.AUSP282.PROD.OUTLOOK.COM
Fixes: ac4bf60bbaa0 ("bus: mhi: pci_generic: Introduce quectel EM1XXGR-L support")
Cc: [email protected]
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Yonglin Tan <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bus/mhi/pci_generic.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -327,6 +327,7 @@ static const struct mhi_pci_dev_info mhi
.config = &modem_quectel_em1xx_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
+ .mru_default = 32768,
.sideband_wake = true,
};
From: José Expósito <[email protected]>
commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream.
This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40.
The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.
In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:
[Precision 7x50 Touchpad]
MatchBus=i2c
MatchUdevType=touchpad
MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50*
AttrInputPropDisable=INPUT_PROP_BUTTONPAD
However, because of the change introduced in 37ef4c19b4 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.
In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Peter Hutterer <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/input.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -2285,12 +2285,6 @@ int input_register_device(struct input_d
/* KEY_RESERVED is not supposed to be transmitted to userspace. */
__clear_bit(KEY_RESERVED, dev->keybit);
- /* Buttonpads should not map BTN_RIGHT and/or BTN_MIDDLE. */
- if (test_bit(INPUT_PROP_BUTTONPAD, dev->propbit)) {
- __clear_bit(BTN_RIGHT, dev->keybit);
- __clear_bit(BTN_MIDDLE, dev->keybit);
- }
-
/* Make sure that bitmasks not mentioned in dev->evbit are clean. */
input_cleanse_bitmasks(dev);
From: Miaoqian Lin <[email protected]>
[ Upstream commit 47c3e06ed95aa9b74932dbc6b23b544f644faf84 ]
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-tegra210-quad.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index 2354ca1e3858..7967073c1354 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -1249,6 +1249,8 @@ static int tegra_qspi_probe(struct platform_device *pdev)
tqspi->phys = r->start;
qspi_irq = platform_get_irq(pdev, 0);
+ if (qspi_irq < 0)
+ return qspi_irq;
tqspi->irq = qspi_irq;
tqspi->clk = devm_clk_get(&pdev->dev, "qspi");
--
2.34.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit d75b26f880f60ead301e79ba0f4a635c5a60767f ]
The %p4cc specifier in some cases might get an unaligned pointer.
Due to this we need to make copy to local variable once to avoid
potential crashes on some architectures due to improper access.
Fixes: af612e43de6d ("lib/vsprintf: Add support for printing V4L2 and DRM fourccs")
Cc: Sakari Ailus <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
lib/vsprintf.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index d7ad44f2c8f5..ec07f6312445 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -49,6 +49,7 @@
#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/byteorder.h> /* cpu_to_le16 */
+#include <asm/unaligned.h>
#include <linux/string_helpers.h>
#include "kstrtox.h"
@@ -1771,7 +1772,7 @@ char *fourcc_string(char *buf, char *end, const u32 *fourcc,
char output[sizeof("0123 little-endian (0x01234567)")];
char *p = output;
unsigned int i;
- u32 val;
+ u32 orig, val;
if (fmt[1] != 'c' || fmt[2] != 'c')
return error_string(buf, end, "(%p4?)", spec);
@@ -1779,21 +1780,22 @@ char *fourcc_string(char *buf, char *end, const u32 *fourcc,
if (check_pointer(&buf, end, fourcc, spec))
return buf;
- val = *fourcc & ~BIT(31);
+ orig = get_unaligned(fourcc);
+ val = orig & ~BIT(31);
- for (i = 0; i < sizeof(*fourcc); i++) {
+ for (i = 0; i < sizeof(u32); i++) {
unsigned char c = val >> (i * 8);
/* Print non-control ASCII characters as-is, dot otherwise */
*p++ = isascii(c) && isprint(c) ? c : '.';
}
- strcpy(p, *fourcc & BIT(31) ? " big-endian" : " little-endian");
+ strcpy(p, orig & BIT(31) ? " big-endian" : " little-endian");
p += strlen(p);
*p++ = ' ';
*p++ = '(';
- p = special_hex_number(p, output + sizeof(output) - 2, *fourcc, sizeof(u32));
+ p = special_hex_number(p, output + sizeof(output) - 2, orig, sizeof(u32));
*p++ = ')';
*p = '\0';
--
2.34.1
From: Sven Peter <[email protected]>
commit 676748389f5db74e7d28f9d630eebd75cb8a11b4 upstream.
In order to bring up the USB3 PHY on the Apple M1 we need to know the
orientation of the Type-C cable. Extract it from the status register and
forward it to the typec subsystem.
Reviewed-by: Heikki Krogerus <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tipd/core.c | 5 +++++
drivers/usb/typec/tipd/tps6598x.h | 1 +
2 files changed, 6 insertions(+)
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -246,6 +246,10 @@ static int tps6598x_connect(struct tps65
typec_set_pwr_opmode(tps->port, mode);
typec_set_pwr_role(tps->port, TPS_STATUS_TO_TYPEC_PORTROLE(status));
typec_set_vconn_role(tps->port, TPS_STATUS_TO_TYPEC_VCONN(status));
+ if (TPS_STATUS_TO_UPSIDE_DOWN(status))
+ typec_set_orientation(tps->port, TYPEC_ORIENTATION_REVERSE);
+ else
+ typec_set_orientation(tps->port, TYPEC_ORIENTATION_NORMAL);
tps6598x_set_data_role(tps, TPS_STATUS_TO_TYPEC_DATAROLE(status), true);
tps->partner = typec_register_partner(tps->port, &desc);
@@ -268,6 +272,7 @@ static void tps6598x_disconnect(struct t
typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB);
typec_set_pwr_role(tps->port, TPS_STATUS_TO_TYPEC_PORTROLE(status));
typec_set_vconn_role(tps->port, TPS_STATUS_TO_TYPEC_VCONN(status));
+ typec_set_orientation(tps->port, TYPEC_ORIENTATION_NONE);
tps6598x_set_data_role(tps, TPS_STATUS_TO_TYPEC_DATAROLE(status), false);
power_supply_changed(tps->psy);
--- a/drivers/usb/typec/tipd/tps6598x.h
+++ b/drivers/usb/typec/tipd/tps6598x.h
@@ -17,6 +17,7 @@
/* TPS_REG_STATUS bits */
#define TPS_STATUS_PLUG_PRESENT BIT(0)
#define TPS_STATUS_PLUG_UPSIDE_DOWN BIT(4)
+#define TPS_STATUS_TO_UPSIDE_DOWN(s) (!!((s) & TPS_STATUS_PLUG_UPSIDE_DOWN))
#define TPS_STATUS_PORTROLE BIT(5)
#define TPS_STATUS_TO_TYPEC_PORTROLE(s) (!!((s) & TPS_STATUS_PORTROLE))
#define TPS_STATUS_DATAROLE BIT(6)
From: Miaoqian Lin <[email protected]>
[ Upstream commit ca85d271531a1e1c86f24b892f57b7d0a3ddb5a6 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: e7f3c5481035 ("[media] coda: use VDOA for un-tiling custom macroblock format")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/coda/coda-common.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index 9a2640a9c75c..4a553f42ff0a 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -408,6 +408,7 @@ static struct vdoa_data *coda_get_vdoa_data(void)
if (!vdoa_data)
vdoa_data = ERR_PTR(-EPROBE_DEFER);
+ put_device(&vdoa_pdev->dev);
out:
of_node_put(vdoa_node);
--
2.34.1
From: Lina Wang <[email protected]>
[ Upstream commit 4ff2980b6bd2aa6b4ded3ce3b7c0ccfab29980af ]
in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().
According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
if packet is larger than 1280 bytes
Send ICMPv6 "packet too big" with MTU=1280
Drop packet
else
Encapsulate but do not set the Don't Fragment
flag in the IPv4 header. The resulting IPv4
packet might be fragmented by the IPv4 layer
on the encapsulator or by some router along
the IPv4 path.
endif
else
if packet is larger than (IPv4 path MTU - 20)
Send ICMPv6 "packet too big" with
MTU = (IPv4 path MTU - 20).
Drop packet.
else
Encapsulate and set the Don't Fragment flag
in the IPv4 header.
endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.
After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.
48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000)
51 2002::10 2002::11 180 Echo (ping) request
52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)
xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request
Signed-off-by: Lina Wang <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/xfrm6_output.c | 16 ++++++++++++++++
net/xfrm/xfrm_interface.c | 5 ++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index d0d280077721..ad07904642ca 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -45,6 +45,19 @@ static int __xfrm6_output_finish(struct net *net, struct sock *sk, struct sk_buf
return xfrm_output(sk, skb);
}
+static int xfrm6_noneed_fragment(struct sk_buff *skb)
+{
+ struct frag_hdr *fh;
+ u8 prevhdr = ipv6_hdr(skb)->nexthdr;
+
+ if (prevhdr != NEXTHDR_FRAGMENT)
+ return 0;
+ fh = (struct frag_hdr *)(skb->data + sizeof(struct ipv6hdr));
+ if (fh->nexthdr == NEXTHDR_ESP || fh->nexthdr == NEXTHDR_AUTH)
+ return 1;
+ return 0;
+}
+
static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
{
struct dst_entry *dst = skb_dst(skb);
@@ -73,6 +86,9 @@ static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
xfrm6_local_rxpmtu(skb, mtu);
kfree_skb(skb);
return -EMSGSIZE;
+ } else if (toobig && xfrm6_noneed_fragment(skb)) {
+ skb->ignore_df = 1;
+ goto skip_frag;
} else if (!skb->ignore_df && toobig && skb->sk) {
xfrm_local_error(skb, mtu);
kfree_skb(skb);
diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 4e3c62d1ad9e..1e8b26eecb3f 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -304,7 +304,10 @@ xfrmi_xmit2(struct sk_buff *skb, struct net_device *dev, struct flowi *fl)
if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
- icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
+ if (skb->len > 1280)
+ icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
+ else
+ goto xmit;
} else {
if (!(ip_hdr(skb)->frag_off & htons(IP_DF)))
goto xmit;
--
2.34.1
From: Marek Vasut <[email protected]>
[ Upstream commit 0c6f71176ea43d6f4003a4d57f7bb518c5ad6145 ]
The M53Menlo display unit uses an LVDS-to-DPI bridge, TI DS90CF364A.
Describe this bridge in DT, otherwise the DT incorrectly describes
DPI panel attached directly to LVDS source.
Fixes: 716be61d1869 ("ARM: dts: imx53: Add Menlosystems M53 board")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx53-m53menlo.dts | 29 ++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81dd..d5c68d1ea707 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@
};
};
+ lvds-decoder {
+ compatible = "ti,ds90cf364a", "lvds-decoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_decoder_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_decoder_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
panel {
compatible = "edt,etm0700g0dh6";
pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
port {
panel_in: endpoint {
- remote-endpoint = <&lvds0_out>;
+ remote-endpoint = <&lvds_decoder_out>;
};
};
};
@@ -450,7 +475,7 @@
reg = <2>;
lvds0_out: endpoint {
- remote-endpoint = <&panel_in>;
+ remote-endpoint = <&lvds_decoder_in>;
};
};
};
--
2.34.1
From: Dirk Buchwalder <[email protected]>
[ Upstream commit b77d8306d84f83d1da68028a68c91da9c867b6f6 ]
Use floor ops on SDCC1 APPS clock in order to round down selected clock
frequency and avoid overclocking SD/eMMC cards.
For example, currently HS200 cards were failling tuning as they were
actually being clocked at 384MHz instead of 192MHz.
This caused some boards to disable 1.8V I/O and force the eMMC into the
standard HS mode (50MHz) and that appeared to work despite the eMMC being
overclocked to 96Mhz in that case.
There was a previous commit to use floor ops on SDCC clocks, but it looks
to have only covered SDCC2 clock.
Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Dirk Buchwalder <[email protected]>
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gcc-ipq8074.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index b09d99343e09..541016db3c4b 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -1074,7 +1074,7 @@ static struct clk_rcg2 sdcc1_apps_clk_src = {
.name = "sdcc1_apps_clk_src",
.parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
.num_parents = 4,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_rcg2_floor_ops,
},
};
--
2.34.1
From: Gerhard Engleder <[email protected]>
[ Upstream commit 678dfd5280341d877ca646499bfdc82a3d8b4356 ]
timestamping checks socket options during initialisation. For the field
bind_phc of the socket option SO_TIMESTAMPING it expects the value -1 if
PHC is not bound. Actually the value of bind_phc is 0 if PHC is not
bound. This results in the following output:
SIOCSHWTSTAMP: tx_type 0 requested, got 0; rx_filter 0 requested, got 0
SO_TIMESTAMP 0
SO_TIMESTAMPNS 0
SO_TIMESTAMPING flags 0, bind phc 0
not expected, flags 0, bind phc -1
This is fixed by setting default value and expected value of bind_phc to
0.
Fixes: 2214d7032479 ("selftests/net: timestamping: support binding PHC")
Signed-off-by: Gerhard Engleder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/timestamping.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/timestamping.c b/tools/testing/selftests/net/timestamping.c
index aee631c5284e..044bc0e9ed81 100644
--- a/tools/testing/selftests/net/timestamping.c
+++ b/tools/testing/selftests/net/timestamping.c
@@ -325,8 +325,8 @@ int main(int argc, char **argv)
struct ifreq device;
struct ifreq hwtstamp;
struct hwtstamp_config hwconfig, hwconfig_requested;
- struct so_timestamping so_timestamping_get = { 0, -1 };
- struct so_timestamping so_timestamping = { 0, -1 };
+ struct so_timestamping so_timestamping_get = { 0, 0 };
+ struct so_timestamping so_timestamping = { 0, 0 };
struct sockaddr_in addr;
struct ip_mreq imr;
struct in_addr iaddr;
--
2.34.1
From: Janusz Krzysztofik <[email protected]>
commit 985d2d7a482e9b64ef9643702b066da9cbd6ae8e upstream.
According to subdevice interface specification found in V4L2 API
documentation, set format pad operations should not affect image
geometry set in preceding image processing steps. Unfortunately, that
requirement is not respected by the driver implementation of set format
as it was not the case when that code was still implementing a pair of
now obsolete .s_mbus_fmt() / .try_mbus_fmt() video operations before
they have been merged and reused as an implementation of .set_fmt() pad
operation by commit 717fd5b4907a ("[media] v4l2: replace try_mbus_fmt
by set_fmt").
Exclude non-compliant crop rectangle adjustments from set format try,
as well as a call to .set_selection() from set format active processing
path, so only frame scaling is applied as needed and crop rectangle is
no longer modified.
[Sakari Ailus: Rebase on subdev state patches]
Fixes: 717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/ov6650.c | 28 ++++------------------------
1 file changed, 4 insertions(+), 24 deletions(-)
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -693,11 +693,7 @@ static int ov6650_set_fmt(struct v4l2_su
struct v4l2_mbus_framefmt *mf = &format->format;
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov6650 *priv = to_ov6650(client);
- struct v4l2_subdev_selection sel = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .target = V4L2_SEL_TGT_CROP,
- };
- struct v4l2_rect *crop = &sel.r;
+ struct v4l2_rect *crop;
bool half_scale;
if (format->pad)
@@ -721,24 +717,13 @@ static int ov6650_set_fmt(struct v4l2_su
}
if (format->which == V4L2_SUBDEV_FORMAT_TRY)
- *crop = sd_state->pads->try_crop;
+ crop = &sd_state->pads->try_crop;
else
- *crop = priv->rect;
+ crop = &priv->rect;
half_scale = !is_unscaled_ok(mf->width, mf->height, crop);
- /* adjust new crop rectangle position against its current center */
- crop->left += (crop->width - (mf->width << half_scale)) / 2;
- crop->top += (crop->height - (mf->height << half_scale)) / 2;
- /* adjust new crop rectangle size */
- crop->width = mf->width << half_scale;
- crop->height = mf->height << half_scale;
-
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
- /* store new crop rectangle, hadware bound, in pad config */
- ov6650_bind_align_crop_rectangle(crop);
- sd_state->pads->try_crop = *crop;
-
/* store new mbus frame format code and size in pad config */
sd_state->pads->try_fmt.width = crop->width >> half_scale;
sd_state->pads->try_fmt.height = crop->height >> half_scale;
@@ -751,12 +736,7 @@ static int ov6650_set_fmt(struct v4l2_su
mf->code = sd_state->pads->try_fmt.code;
} else {
- int ret;
-
- /* apply new crop rectangle */
- ret = ov6650_set_selection(sd, NULL, &sel);
- if (ret)
- return ret;
+ int ret = 0;
/* apply new media bus frame format and scaling if changed */
if (mf->code != priv->code || half_scale != priv->half_scale)
From: Alexander Lobakin <[email protected]>
[ Upstream commit f322a620be69e95594eda89502b478aa7dbf6ec2 ]
For now, if the XDP prog returns XDP_PASS on XSK, the metadata
will be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ixgbe_construct_skb().
Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <[email protected]>
Suggested-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Tested-by: Sandeep Penigalapati <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
index 36f43dc3a55e..b399b9c14717 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
@@ -203,19 +203,25 @@ bool ixgbe_alloc_rx_buffers_zc(struct ixgbe_ring *rx_ring, u16 count)
static struct sk_buff *ixgbe_construct_skb_zc(struct ixgbe_ring *rx_ring,
const struct xdp_buff *xdp)
{
+ unsigned int totalsize = xdp->data_end - xdp->data_meta;
unsigned int metasize = xdp->data - xdp->data_meta;
- unsigned int datasize = xdp->data_end - xdp->data;
struct sk_buff *skb;
+ net_prefetch(xdp->data_meta);
+
/* allocate a skb to store the frags */
- skb = __napi_alloc_skb(&rx_ring->q_vector->napi, datasize,
+ skb = __napi_alloc_skb(&rx_ring->q_vector->napi, totalsize,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
return NULL;
- memcpy(__skb_put(skb, datasize), xdp->data, datasize);
- if (metasize)
+ memcpy(__skb_put(skb, totalsize), xdp->data_meta,
+ ALIGN(totalsize, sizeof(long)));
+
+ if (metasize) {
skb_metadata_set(skb, metasize);
+ __skb_pull(skb, metasize);
+ }
return skb;
}
--
2.34.1
From: Arınç ÜNAL <[email protected]>
[ Upstream commit 0a93c0d75809582893e82039143591b9265b520e ]
Add pinctrl properties with rgmii1 & mdio pins under ethernet node which
was wrongfully put under an external phy node.
GMAC1 will start working with this fix.
Link: https://lore.kernel.org/netdev/[email protected]/T/
Move GB-PC2 specific phy_external node to its own device tree.
Reviewed-by: Sergio Paracuellos <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/mt7621-dts/gbpc2.dts | 16 +++++++++++-----
drivers/staging/mt7621-dts/mt7621.dtsi | 13 +++----------
2 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/mt7621-dts/gbpc2.dts b/drivers/staging/mt7621-dts/gbpc2.dts
index 52760e7351f6..f9b69091bfc0 100644
--- a/drivers/staging/mt7621-dts/gbpc2.dts
+++ b/drivers/staging/mt7621-dts/gbpc2.dts
@@ -12,10 +12,16 @@
function = "gpio";
};
-&gmac1 {
- status = "ok";
-};
+ðernet {
+ gmac1: mac@1 {
+ status = "ok";
+ phy-handle = <&phy_external>;
+ };
-&phy_external {
- status = "ok";
+ mdio-bus {
+ phy_external: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii-rxid";
+ };
+ };
};
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index eca384cdec39..99b0eef1f3e2 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -391,6 +391,9 @@
mediatek,ethsys = <&sysc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
@@ -408,22 +411,12 @@
reg = <1>;
status = "off";
phy-mode = "rgmii-rxid";
- phy-handle = <&phy_external>;
};
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
- phy_external: ethernet-phy@5 {
- status = "off";
- reg = <5>;
- phy-mode = "rgmii-rxid";
-
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii2_pins>;
- };
-
switch0: switch0@0 {
compatible = "mediatek,mt7621";
#address-cells = <1>;
--
2.34.1
From: Marcelo Ricardo Leitner <[email protected]>
[ Upstream commit bcb74e132a76ce0502bb33d5b65533a4ed72d159 ]
When switching zones or network namespaces without doing a ct clear in
between, it is now leaking a reference to the old ct entry. That's
because tcf_ct_skb_nfct_cached() returns false and
tcf_ct_flow_table_lookup() may simply overwrite it.
The fix is to, as the ct entry is not reusable, free it already at
tcf_ct_skb_nfct_cached().
Reported-by: Florian Westphal <[email protected]>
Fixes: 2f131de361f6 ("net/sched: act_ct: Fix flow table lookup after ct clear or switching zones")
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/act_ct.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index 240b3c5d2eb1..553bf41671a6 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -583,22 +583,25 @@ static bool tcf_ct_skb_nfct_cached(struct net *net, struct sk_buff *skb,
if (!ct)
return false;
if (!net_eq(net, read_pnet(&ct->ct_net)))
- return false;
+ goto drop_ct;
if (nf_ct_zone(ct)->id != zone_id)
- return false;
+ goto drop_ct;
/* Force conntrack entry direction. */
if (force && CTINFO2DIR(ctinfo) != IP_CT_DIR_ORIGINAL) {
if (nf_ct_is_confirmed(ct))
nf_ct_kill(ct);
- nf_ct_put(ct);
- nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
-
- return false;
+ goto drop_ct;
}
return true;
+
+drop_ct:
+ nf_ct_put(ct);
+ nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
+
+ return false;
}
/* Trim the skb to the length specified by the IP/IPv6 header,
--
2.34.1
From: Paolo Bonzini <[email protected]>
commit d6174299365ddbbf491620c0b8c5ca1a6ef2eea5 upstream.
While the guest runs, EFER.LME cannot change unless CR0.PG is clear, and
therefore EFER.NX is the only bit that can affect the MMU role. However,
set_efer accepts a host-initiated change to EFER.LME even with CR0.PG=1.
In that case, the MMU has to be reset.
Fixes: 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: [email protected]
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu.h | 1 +
arch/x86/kvm/x86.c | 3 +--
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -49,6 +49,7 @@
X86_CR4_LA57)
#define KVM_MMU_CR0_ROLE_BITS (X86_CR0_PG | X86_CR0_WP)
+#define KVM_MMU_EFER_ROLE_BITS (EFER_LME | EFER_NX)
static __always_inline u64 rsvd_bits(int s, int e)
{
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1605,8 +1605,7 @@ static int set_efer(struct kvm_vcpu *vcp
return r;
}
- /* Update reserved bits */
- if ((efer ^ old_efer) & EFER_NX)
+ if ((efer ^ old_efer) & KVM_MMU_EFER_ROLE_BITS)
kvm_mmu_reset_context(vcpu);
return 0;
From: Alexey Dobriyan <[email protected]>
[ Upstream commit 839b395eb9c13ae56ea5fc3ca9802734a72293f0 ]
Codegen become bloated again after simple_strntoull() introduction
add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-224 (-224)
Function old new delta
simple_strtoul 5 2 -3
simple_strtol 23 20 -3
simple_strtoull 119 15 -104
simple_strtoll 155 41 -114
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alexey Dobriyan <[email protected]>
Cc: Richard Fitzgerald <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/vsprintf.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index ec07f6312445..0621bbb20e0f 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -54,8 +54,7 @@
#include <linux/string_helpers.h>
#include "kstrtox.h"
-static unsigned long long simple_strntoull(const char *startp, size_t max_chars,
- char **endp, unsigned int base)
+static noinline unsigned long long simple_strntoull(const char *startp, size_t max_chars, char **endp, unsigned int base)
{
const char *cp;
unsigned long long result = 0ULL;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 96211b7c56b109a52768e6cc5e23a1f79316eca0 ]
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for __dw_mipi_dsi_probe.
Fixes: 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index e44e18a0112a..56c3fd08c6a0 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -1199,6 +1199,7 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
ret = mipi_dsi_host_register(&dsi->dsi_host);
if (ret) {
dev_err(dev, "Failed to register MIPI host: %d\n", ret);
+ pm_runtime_disable(dev);
dw_mipi_dsi_debugfs_remove(dsi);
return ERR_PTR(ret);
}
--
2.34.1
From: Jakub Sitnicki <[email protected]>
[ Upstream commit a4c9fe0ed4a13e25e43fcd44d9f89bc19ba8fbb7 ]
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes: b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/progs/test_sock_fields.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/progs/test_sock_fields.c b/tools/testing/selftests/bpf/progs/test_sock_fields.c
index 81b57b9aaaea..7967348b11af 100644
--- a/tools/testing/selftests/bpf/progs/test_sock_fields.c
+++ b/tools/testing/selftests/bpf/progs/test_sock_fields.c
@@ -113,7 +113,7 @@ static void tpcpy(struct bpf_tcp_sock *dst,
#define RET_LOG() ({ \
linum = __LINE__; \
- bpf_map_update_elem(&linum_map, &linum_idx, &linum, BPF_NOEXIST); \
+ bpf_map_update_elem(&linum_map, &linum_idx, &linum, BPF_ANY); \
return CG_OK; \
})
--
2.34.1
From: Eddie James <[email protected]>
commit e1d15646565b284e9ef2433234d6cfdaf66695f1 upstream.
IBM manufactures a PL2303 device for UPS communications. Add the vendor
and product IDs so that the PL2303 driver binds to the device.
Signed-off-by: Eddie James <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
[ johan: amend the SoB chain ]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 3 +++
2 files changed, 4 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -116,6 +116,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
+ { USB_DEVICE(IBM_VENDOR_ID, IBM_PRODUCT_ID) },
{ } /* Terminating entry */
};
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -35,6 +35,9 @@
#define ATEN_PRODUCT_UC232B 0x2022
#define ATEN_PRODUCT_ID2 0x2118
+#define IBM_VENDOR_ID 0x04b3
+#define IBM_PRODUCT_ID 0x4016
+
#define IODATA_VENDOR_ID 0x04bb
#define IODATA_PRODUCT_ID 0x0a03
#define IODATA_PRODUCT_ID_RSAQ5 0x0a0e
From: Christophe JAILLET <[email protected]>
[ Upstream commit 043cfff99a18933fda2fb2e163daee73cc07910b ]
Remove an extra ";" which breaks compilation.
Fixes: 53bf2b0e4e4c ("firmware: ti_sci: Add support for getting resource with subtype")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/e6c3cb793e1a6a2a0ae2528d5a5650dfe6a4b6ff.1640276505.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/soc/ti/ti_sci_protocol.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index 0aad7009b50e..bd0d11af76c5 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -645,7 +645,7 @@ devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
static inline struct ti_sci_resource *
devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev,
- u32 dev_id, u32 sub_type);
+ u32 dev_id, u32 sub_type)
{
return ERR_PTR(-EINVAL);
}
--
2.34.1
From: Michael Schmitz <[email protected]>
commit c8be5edbd36ceed2ff3d6b8f8e40643c3f396ea3 upstream.
The code to set the shifter STe palette registers has a long
standing operator precedence bug, manifesting as colors set
on a 2 bits per pixel frame buffer coming up with a distinctive
blue tint.
Add parentheses around the calculation of the per-color palette
data before shifting those into their respective bit field position.
This bug goes back a long way (2.4 days at the very least) so there
won't be a Fixes: tag.
Tested on ARAnyM as well on Falcon030 hardware.
Cc: [email protected]
Reported-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/all/CAMuHMdU3ievhXxKR_xi_v3aumnYW7UNUO6qMdhgfyWTyVSsCkQ@mail.gmail.com
Tested-by: Michael Schmitz <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Michael Schmitz <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/atafb.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/video/fbdev/atafb.c
+++ b/drivers/video/fbdev/atafb.c
@@ -1683,9 +1683,9 @@ static int falcon_setcolreg(unsigned int
((blue & 0xfc00) >> 8));
if (regno < 16) {
shifter_tt.color_reg[regno] =
- (((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) |
- (((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) |
- ((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
+ ((((red & 0xe000) >> 13) | ((red & 0x1000) >> 12)) << 8) |
+ ((((green & 0xe000) >> 13) | ((green & 0x1000) >> 12)) << 4) |
+ ((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) |
((green & 0xfc00) >> 5) |
((blue & 0xf800) >> 11));
@@ -1971,9 +1971,9 @@ static int stste_setcolreg(unsigned int
green >>= 12;
if (ATARIHW_PRESENT(EXTD_SHIFTER))
shifter_tt.color_reg[regno] =
- (((red & 0xe) >> 1) | ((red & 1) << 3) << 8) |
- (((green & 0xe) >> 1) | ((green & 1) << 3) << 4) |
- ((blue & 0xe) >> 1) | ((blue & 1) << 3);
+ ((((red & 0xe) >> 1) | ((red & 1) << 3)) << 8) |
+ ((((green & 0xe) >> 1) | ((green & 1) << 3)) << 4) |
+ ((blue & 0xe) >> 1) | ((blue & 1) << 3);
else
shifter_tt.color_reg[regno] =
((red & 0xe) << 7) |
From: Ang Tien Sung <[email protected]>
commit b850b7a8b369322adf699ef48ceff4d902525c8c upstream.
Fix a bug whereby, the return response of parameter a1 from an
SMC call is not properly set to the callback data during an
INTEL_SIP_SMC_RSU_ERROR command.
Link: https://lore.kernel.org/lkml/[email protected]
Fixes: 6b50d882d38d ("firmware: add remote status update client support")
Cc: [email protected]
Signed-off-by: Ang Tien Sung <[email protected]>
Signed-off-by: Dinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/stratix10-svc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -477,7 +477,7 @@ static int svc_normal_to_secure_thread(v
case INTEL_SIP_SMC_RSU_ERROR:
pr_err("%s: STATUS_ERROR\n", __func__);
cbdata->status = BIT(SVC_STATUS_ERROR);
- cbdata->kaddr1 = NULL;
+ cbdata->kaddr1 = &res.a1;
cbdata->kaddr2 = NULL;
cbdata->kaddr3 = NULL;
pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
From: Thomas Zimmermann <[email protected]>
commit cd9f7f7ac5932129fe81b4c7559cfcb226ec7c5c upstream.
Mark screen buffers in system memory with FBINFO_VIRTFB. Otherwise, fbdev
deferred I/O marks mmap'ed areas of system memory with VM_IO. (There's an
inverse relationship between the two flags.)
For shadow buffers, also set the FBINFO_READS_FAST hint.
v3:
* change FB_ to FBINFO_ in commit description
v2:
* updated commit description (Daniel)
* added Fixes tag
Signed-off-by: Thomas Zimmermann <[email protected]>
Fixes: d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function")
Reviewed-by: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v4.19+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_fb_helper.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -2346,6 +2346,7 @@ static int drm_fb_helper_generic_probe(s
fbi->fbops = &drm_fbdev_fb_ops;
fbi->screen_size = fb->height * fb->pitches[0];
fbi->fix.smem_len = fbi->screen_size;
+ fbi->flags = FBINFO_DEFAULT;
drm_fb_helper_fill_info(fbi, fb_helper, sizes);
@@ -2353,19 +2354,21 @@ static int drm_fb_helper_generic_probe(s
fbi->screen_buffer = vzalloc(fbi->screen_size);
if (!fbi->screen_buffer)
return -ENOMEM;
+ fbi->flags |= FBINFO_VIRTFB | FBINFO_READS_FAST;
fbi->fbdefio = &drm_fbdev_defio;
-
fb_deferred_io_init(fbi);
} else {
/* buffer is mapped for HW framebuffer */
ret = drm_client_buffer_vmap(fb_helper->buffer, &map);
if (ret)
return ret;
- if (map.is_iomem)
+ if (map.is_iomem) {
fbi->screen_base = map.vaddr_iomem;
- else
+ } else {
fbi->screen_buffer = map.vaddr;
+ fbi->flags |= FBINFO_VIRTFB;
+ }
/*
* Shamelessly leak the physical address to user-space. As
From: Jonathan Marek <[email protected]>
[ Upstream commit a6da362491e409de0978d733441e59db6584d69f ]
csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Tested-by: Julian Grahsl <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index aa65043c3303..a006c8dbceb1 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -444,12 +444,6 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val |= 1 << CSI2_RX_CFG1_MISR_EN;
writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1); // csi2_vc_mode_shift_val ?
- /* error irqs start at BIT(11) */
- writel_relaxed(~0u, csid->base + CSID_CSI2_RX_IRQ_MASK);
-
- /* RDI irq */
- writel_relaxed(~0u, csid->base + CSID_TOP_IRQ_MASK);
-
val = 1 << RDI_CTRL_HALT_CMD;
writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
}
--
2.34.1
From: Sakari Ailus <[email protected]>
[ Upstream commit edd4fbff5378a8103470304809195dc8f4b1d42a ]
Don't pack the driver specific struct containing control pointers. This
lead to potential alignment issues when working with the pointers.
Reported-by: kernel test robot <[email protected]>
Fixes: e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor")
Reviewed-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov5648.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov5648.c b/drivers/media/i2c/ov5648.c
index 947d437ed0ef..78040f0ac02f 100644
--- a/drivers/media/i2c/ov5648.c
+++ b/drivers/media/i2c/ov5648.c
@@ -639,7 +639,7 @@ struct ov5648_ctrls {
struct v4l2_ctrl *pixel_rate;
struct v4l2_ctrl_handler handler;
-} __packed;
+};
struct ov5648_sensor {
struct device *dev;
--
2.34.1
From: Charan Teja Kalla <[email protected]>
commit 08095d6310a7ce43256b4251577bc66a25c6e1a6 upstream.
The process_madvise() system call is expected to skip holes in vma passed
through 'struct iovec' vector list. But do_madvise, which
process_madvise() calls for each vma, returns ENOMEM in case of unmapped
holes, despite the VMA is processed.
Thus process_madvise() should treat ENOMEM as expected and consider the
VMA passed to as processed and continue processing other vma's in the
vector list. Returning -ENOMEM to user, despite the VMA is processed,
will be unable to figure out where to start the next madvise.
Link: https://lkml.kernel.org/r/4f091776142f2ebf7b94018146de72318474e686.1647008754.git.quic_charante@quicinc.com
Fixes: ecb8ac8b1f14("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
Signed-off-by: Charan Teja Kalla <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/madvise.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -1287,9 +1287,16 @@ SYSCALL_DEFINE5(process_madvise, int, pi
while (iov_iter_count(&iter)) {
iovec = iov_iter_iovec(&iter);
+ /*
+ * do_madvise returns ENOMEM if unmapped holes are present
+ * in the passed VMA. process_madvise() is expected to skip
+ * unmapped holes passed to it in the 'struct iovec' list
+ * and not fail because of them. Thus treat -ENOMEM return
+ * from do_madvise as valid and continue processing.
+ */
ret = do_madvise(mm, (unsigned long)iovec.iov_base,
iovec.iov_len, behavior);
- if (ret < 0)
+ if (ret < 0 && ret != -ENOMEM)
break;
iov_iter_advance(&iter, iovec.iov_len);
}
From: Lad Prabhakar <[email protected]>
[ Upstream commit 6570f991582e32b7992601d0497c61962a2c5dcc ]
Instead of recursively calling rz_ssi_pio_recv() use a while loop
to read the samples from RX fifo.
This also fixes an issue where the return value of rz_ssi_pio_recv()
was ignored when called recursively.
Fixes: 03e786bd4341 ("ASoC: sh: Add RZ/G2L SSIF-2 driver")
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rz-ssi.c | 68 ++++++++++++++++++++++---------------------
1 file changed, 35 insertions(+), 33 deletions(-)
diff --git a/sound/soc/sh/rz-ssi.c b/sound/soc/sh/rz-ssi.c
index fa0cc08f70ec..37466f65c2b0 100644
--- a/sound/soc/sh/rz-ssi.c
+++ b/sound/soc/sh/rz-ssi.c
@@ -411,54 +411,56 @@ static int rz_ssi_pio_recv(struct rz_ssi_priv *ssi, struct rz_ssi_stream *strm)
{
struct snd_pcm_substream *substream = strm->substream;
struct snd_pcm_runtime *runtime;
+ bool done = false;
u16 *buf;
int fifo_samples;
int frames_left;
- int samples = 0;
+ int samples;
int i;
if (!rz_ssi_stream_is_valid(ssi, strm))
return -EINVAL;
runtime = substream->runtime;
- /* frames left in this period */
- frames_left = runtime->period_size - (strm->buffer_pos %
- runtime->period_size);
- if (frames_left == 0)
- frames_left = runtime->period_size;
- /* Samples in RX FIFO */
- fifo_samples = (rz_ssi_reg_readl(ssi, SSIFSR) >>
- SSIFSR_RDC_SHIFT) & SSIFSR_RDC_MASK;
-
- /* Only read full frames at a time */
- while (frames_left && (fifo_samples >= runtime->channels)) {
- samples += runtime->channels;
- fifo_samples -= runtime->channels;
- frames_left--;
- }
+ while (!done) {
+ /* frames left in this period */
+ frames_left = runtime->period_size -
+ (strm->buffer_pos % runtime->period_size);
+ if (!frames_left)
+ frames_left = runtime->period_size;
+
+ /* Samples in RX FIFO */
+ fifo_samples = (rz_ssi_reg_readl(ssi, SSIFSR) >>
+ SSIFSR_RDC_SHIFT) & SSIFSR_RDC_MASK;
+
+ /* Only read full frames at a time */
+ samples = 0;
+ while (frames_left && (fifo_samples >= runtime->channels)) {
+ samples += runtime->channels;
+ fifo_samples -= runtime->channels;
+ frames_left--;
+ }
- /* not enough samples yet */
- if (samples == 0)
- return 0;
+ /* not enough samples yet */
+ if (!samples)
+ break;
- /* calculate new buffer index */
- buf = (u16 *)(runtime->dma_area);
- buf += strm->buffer_pos * runtime->channels;
+ /* calculate new buffer index */
+ buf = (u16 *)(runtime->dma_area);
+ buf += strm->buffer_pos * runtime->channels;
- /* Note, only supports 16-bit samples */
- for (i = 0; i < samples; i++)
- *buf++ = (u16)(rz_ssi_reg_readl(ssi, SSIFRDR) >> 16);
+ /* Note, only supports 16-bit samples */
+ for (i = 0; i < samples; i++)
+ *buf++ = (u16)(rz_ssi_reg_readl(ssi, SSIFRDR) >> 16);
- rz_ssi_reg_mask_setl(ssi, SSIFSR, SSIFSR_RDF, 0);
- rz_ssi_pointer_update(strm, samples / runtime->channels);
+ rz_ssi_reg_mask_setl(ssi, SSIFSR, SSIFSR_RDF, 0);
+ rz_ssi_pointer_update(strm, samples / runtime->channels);
- /*
- * If we finished this period, but there are more samples in
- * the RX FIFO, call this function again
- */
- if (frames_left == 0 && fifo_samples >= runtime->channels)
- rz_ssi_pio_recv(ssi, strm);
+ /* check if there are no more samples in the RX FIFO */
+ if (!(!frames_left && fifo_samples >= runtime->channels))
+ done = true;
+ }
return 0;
}
--
2.34.1
From: Scott Mayhew <[email protected]>
[ Upstream commit b8b87fd954b4b1bdd2d739c8f50bf685351a1a94 ]
selinux_sb_mnt_opts_compat() is called under the sb_lock spinlock and
shouldn't be performing any memory allocations. Fix this by parsing the
sids at the same time we're chopping up the security mount options
string and then using the pre-parsed sids when doing the comparison.
Fixes: cc274ae7763d ("selinux: fix sleeping function called from invalid context")
Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount")
Signed-off-by: Scott Mayhew <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/hooks.c | 75 ++++++++++++++++++++++------------------
1 file changed, 41 insertions(+), 34 deletions(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 0981008ac7d3..f3c8acf45ed9 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -355,6 +355,10 @@ static void inode_free_security(struct inode *inode)
struct selinux_mnt_opts {
const char *fscontext, *context, *rootcontext, *defcontext;
+ u32 fscontext_sid;
+ u32 context_sid;
+ u32 rootcontext_sid;
+ u32 defcontext_sid;
};
static void selinux_free_mnt_opts(void *mnt_opts)
@@ -611,15 +615,14 @@ static int bad_option(struct superblock_security_struct *sbsec, char flag,
return 0;
}
-static int parse_sid(struct super_block *sb, const char *s, u32 *sid,
- gfp_t gfp)
+static int parse_sid(struct super_block *sb, const char *s, u32 *sid)
{
int rc = security_context_str_to_sid(&selinux_state, s,
- sid, gfp);
+ sid, GFP_KERNEL);
if (rc)
pr_warn("SELinux: security_context_str_to_sid"
"(%s) failed for (dev %s, type %s) errno=%d\n",
- s, sb->s_id, sb->s_type->name, rc);
+ s, sb ? sb->s_id : "?", sb ? sb->s_type->name : "?", rc);
return rc;
}
@@ -686,8 +689,7 @@ static int selinux_set_mnt_opts(struct super_block *sb,
*/
if (opts) {
if (opts->fscontext) {
- rc = parse_sid(sb, opts->fscontext, &fscontext_sid,
- GFP_KERNEL);
+ rc = parse_sid(sb, opts->fscontext, &fscontext_sid);
if (rc)
goto out;
if (bad_option(sbsec, FSCONTEXT_MNT, sbsec->sid,
@@ -696,8 +698,7 @@ static int selinux_set_mnt_opts(struct super_block *sb,
sbsec->flags |= FSCONTEXT_MNT;
}
if (opts->context) {
- rc = parse_sid(sb, opts->context, &context_sid,
- GFP_KERNEL);
+ rc = parse_sid(sb, opts->context, &context_sid);
if (rc)
goto out;
if (bad_option(sbsec, CONTEXT_MNT, sbsec->mntpoint_sid,
@@ -706,8 +707,7 @@ static int selinux_set_mnt_opts(struct super_block *sb,
sbsec->flags |= CONTEXT_MNT;
}
if (opts->rootcontext) {
- rc = parse_sid(sb, opts->rootcontext, &rootcontext_sid,
- GFP_KERNEL);
+ rc = parse_sid(sb, opts->rootcontext, &rootcontext_sid);
if (rc)
goto out;
if (bad_option(sbsec, ROOTCONTEXT_MNT, root_isec->sid,
@@ -716,8 +716,7 @@ static int selinux_set_mnt_opts(struct super_block *sb,
sbsec->flags |= ROOTCONTEXT_MNT;
}
if (opts->defcontext) {
- rc = parse_sid(sb, opts->defcontext, &defcontext_sid,
- GFP_KERNEL);
+ rc = parse_sid(sb, opts->defcontext, &defcontext_sid);
if (rc)
goto out;
if (bad_option(sbsec, DEFCONTEXT_MNT, sbsec->def_sid,
@@ -1008,21 +1007,29 @@ static int selinux_add_opt(int token, const char *s, void **mnt_opts)
if (opts->context || opts->defcontext)
goto Einval;
opts->context = s;
+ if (selinux_initialized(&selinux_state))
+ parse_sid(NULL, s, &opts->context_sid);
break;
case Opt_fscontext:
if (opts->fscontext)
goto Einval;
opts->fscontext = s;
+ if (selinux_initialized(&selinux_state))
+ parse_sid(NULL, s, &opts->fscontext_sid);
break;
case Opt_rootcontext:
if (opts->rootcontext)
goto Einval;
opts->rootcontext = s;
+ if (selinux_initialized(&selinux_state))
+ parse_sid(NULL, s, &opts->rootcontext_sid);
break;
case Opt_defcontext:
if (opts->context || opts->defcontext)
goto Einval;
opts->defcontext = s;
+ if (selinux_initialized(&selinux_state))
+ parse_sid(NULL, s, &opts->defcontext_sid);
break;
}
return 0;
@@ -2696,8 +2703,6 @@ static int selinux_sb_mnt_opts_compat(struct super_block *sb, void *mnt_opts)
{
struct selinux_mnt_opts *opts = mnt_opts;
struct superblock_security_struct *sbsec = selinux_superblock(sb);
- u32 sid;
- int rc;
/*
* Superblock not initialized (i.e. no options) - reject if any
@@ -2714,34 +2719,36 @@ static int selinux_sb_mnt_opts_compat(struct super_block *sb, void *mnt_opts)
return (sbsec->flags & SE_MNTMASK) ? 1 : 0;
if (opts->fscontext) {
- rc = parse_sid(sb, opts->fscontext, &sid, GFP_NOWAIT);
- if (rc)
+ if (opts->fscontext_sid == SECSID_NULL)
return 1;
- if (bad_option(sbsec, FSCONTEXT_MNT, sbsec->sid, sid))
+ else if (bad_option(sbsec, FSCONTEXT_MNT, sbsec->sid,
+ opts->fscontext_sid))
return 1;
}
if (opts->context) {
- rc = parse_sid(sb, opts->context, &sid, GFP_NOWAIT);
- if (rc)
+ if (opts->context_sid == SECSID_NULL)
return 1;
- if (bad_option(sbsec, CONTEXT_MNT, sbsec->mntpoint_sid, sid))
+ else if (bad_option(sbsec, CONTEXT_MNT, sbsec->mntpoint_sid,
+ opts->context_sid))
return 1;
}
if (opts->rootcontext) {
- struct inode_security_struct *root_isec;
-
- root_isec = backing_inode_security(sb->s_root);
- rc = parse_sid(sb, opts->rootcontext, &sid, GFP_NOWAIT);
- if (rc)
- return 1;
- if (bad_option(sbsec, ROOTCONTEXT_MNT, root_isec->sid, sid))
+ if (opts->rootcontext_sid == SECSID_NULL)
return 1;
+ else {
+ struct inode_security_struct *root_isec;
+
+ root_isec = backing_inode_security(sb->s_root);
+ if (bad_option(sbsec, ROOTCONTEXT_MNT, root_isec->sid,
+ opts->rootcontext_sid))
+ return 1;
+ }
}
if (opts->defcontext) {
- rc = parse_sid(sb, opts->defcontext, &sid, GFP_NOWAIT);
- if (rc)
+ if (opts->defcontext_sid == SECSID_NULL)
return 1;
- if (bad_option(sbsec, DEFCONTEXT_MNT, sbsec->def_sid, sid))
+ else if (bad_option(sbsec, DEFCONTEXT_MNT, sbsec->def_sid,
+ opts->defcontext_sid))
return 1;
}
return 0;
@@ -2761,14 +2768,14 @@ static int selinux_sb_remount(struct super_block *sb, void *mnt_opts)
return 0;
if (opts->fscontext) {
- rc = parse_sid(sb, opts->fscontext, &sid, GFP_KERNEL);
+ rc = parse_sid(sb, opts->fscontext, &sid);
if (rc)
return rc;
if (bad_option(sbsec, FSCONTEXT_MNT, sbsec->sid, sid))
goto out_bad_option;
}
if (opts->context) {
- rc = parse_sid(sb, opts->context, &sid, GFP_KERNEL);
+ rc = parse_sid(sb, opts->context, &sid);
if (rc)
return rc;
if (bad_option(sbsec, CONTEXT_MNT, sbsec->mntpoint_sid, sid))
@@ -2777,14 +2784,14 @@ static int selinux_sb_remount(struct super_block *sb, void *mnt_opts)
if (opts->rootcontext) {
struct inode_security_struct *root_isec;
root_isec = backing_inode_security(sb->s_root);
- rc = parse_sid(sb, opts->rootcontext, &sid, GFP_KERNEL);
+ rc = parse_sid(sb, opts->rootcontext, &sid);
if (rc)
return rc;
if (bad_option(sbsec, ROOTCONTEXT_MNT, root_isec->sid, sid))
goto out_bad_option;
}
if (opts->defcontext) {
- rc = parse_sid(sb, opts->defcontext, &sid, GFP_KERNEL);
+ rc = parse_sid(sb, opts->defcontext, &sid);
if (rc)
return rc;
if (bad_option(sbsec, DEFCONTEXT_MNT, sbsec->def_sid, sid))
--
2.34.1
From: Nishanth Menon <[email protected]>
commit 8cae268b70f387ff9e697ccd62fb2384079124e7 upstream.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A53 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
[1] https://developer.arm.com/documentation/ddi0500/e/system-control/aarch64-register-descriptions/configuration-base-address-register--el1
[2] https://lore.kernel.org/all/[email protected]/
[3] https://developer.arm.com/documentation/ddi0500/e/generic-interrupt-controller-cpu-interface/gic-programmers-model/memory-map
Cc: [email protected] # 5.10+
Fixes: ea47eed33a3f ("arm64: dts: ti: Add Support for AM654 SoC")
Reported-by: Marc Zyngier <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 ++++-
arch/arm64/boot/dts/ti/k3-am65.dtsi | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -35,7 +35,10 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01880000 0x00 0x90000>; /* GICR */
+ <0x00 0x01880000 0x00 0x90000>, /* GICR */
+ <0x00 0x6f000000 0x00 0x2000>, /* GICC */
+ <0x00 0x6f010000 0x00 0x1000>, /* GICH */
+ <0x00 0x6f020000 0x00 0x2000>; /* GICV */
/*
* vcpumntirq:
* virtual CPU interface maintenance interrupt
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -84,6 +84,7 @@
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
<0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
<0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
From: Christian Göttsche <[email protected]>
[ Upstream commit bcb62828e3e8c813b6613db6eb7fd9657db248fc ]
sel_make_avc_files() might fail and return a negative errno value on
memory allocation failures. Re-add the check of the return value,
dropped in 66f8e2f03c02 ("selinux: sidtab reverse lookup hash table").
Reported by clang-analyzer:
security/selinux/selinuxfs.c:2129:2: warning: Value stored to
'ret' is never read [deadcode.DeadStores]
ret = sel_make_avc_files(dentry);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 66f8e2f03c02 ("selinux: sidtab reverse lookup hash table")
Signed-off-by: Christian Göttsche <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
[PM: description line wrapping, added proper commit ref]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/selinuxfs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index e4cd7cb856f3..f2f6203e0fff 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -2127,6 +2127,8 @@ static int sel_fill_super(struct super_block *sb, struct fs_context *fc)
}
ret = sel_make_avc_files(dentry);
+ if (ret)
+ goto err;
dentry = sel_make_dir(sb->s_root, "ss", &fsi->last_ino);
if (IS_ERR(dentry)) {
--
2.34.1
From: Rik van Riel <[email protected]>
commit e53ac7374e64dede04d745ff0e70ff5048378d1f upstream.
Sometimes the page offlining code can leave behind a hwpoisoned clean
page cache page. This can lead to programs being killed over and over
and over again as they fault in the hwpoisoned page, get killed, and
then get re-spawned by whatever wanted to run them.
This is particularly embarrassing when the page was offlined due to
having too many corrected memory errors. Now we are killing tasks due
to them trying to access memory that probably isn't even corrupted.
This problem can be avoided by invalidating the page from the page fault
handler, which already has a branch for dealing with these kinds of
pages. With this patch we simply pretend the page fault was successful
if the page was invalidated, return to userspace, incur another page
fault, read in the file from disk (to a new memory page), and then
everything works again.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Rik van Riel <[email protected]>
Reviewed-by: Miaohe Lin <[email protected]>
Acked-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3861,11 +3861,16 @@ static vm_fault_t __do_fault(struct vm_f
return ret;
if (unlikely(PageHWPoison(vmf->page))) {
- if (ret & VM_FAULT_LOCKED)
+ vm_fault_t poisonret = VM_FAULT_HWPOISON;
+ if (ret & VM_FAULT_LOCKED) {
+ /* Retry if a clean page was removed from the cache. */
+ if (invalidate_inode_page(vmf->page))
+ poisonret = 0;
unlock_page(vmf->page);
+ }
put_page(vmf->page);
vmf->page = NULL;
- return VM_FAULT_HWPOISON;
+ return poisonret;
}
if (unlikely(!(ret & VM_FAULT_LOCKED)))
From: Maciej W. Rozycki <[email protected]>
commit 244eae91a94c6dab82b3232967d10eeb9dfa21c6 upstream.
Recent tightening of the opcode table in binutils so as to consistently
disallow the assembly or disassembly of CP0 instructions not supported
by the processor architecture chosen has caused a regression like below:
arch/mips/dec/prom/locore.S: Assembler messages:
arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe'
in a piece of code used to probe for memory with PMAX DECstation models,
which have non-REX firmware. Those computers always have an R2000 CPU
and consequently the exception handler used in memory probing uses the
RFE instruction, which those processors use.
While adding 64-bit support this code was correctly excluded for 64-bit
configurations, however it should have also been excluded for irrelevant
32-bit configurations. Do this now then, and only enable PMAX memory
probing for R3k systems.
Reported-by: Jan-Benedict Glaw <[email protected]>
Reported-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: [email protected] # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/dec/prom/Makefile | 2 +-
arch/mips/include/asm/dec/prom.h | 15 +++++----------
2 files changed, 6 insertions(+), 11 deletions(-)
--- a/arch/mips/dec/prom/Makefile
+++ b/arch/mips/dec/prom/Makefile
@@ -6,4 +6,4 @@
lib-y += init.o memory.o cmdline.o identify.o console.o
-lib-$(CONFIG_32BIT) += locore.o
+lib-$(CONFIG_CPU_R3000) += locore.o
--- a/arch/mips/include/asm/dec/prom.h
+++ b/arch/mips/include/asm/dec/prom.h
@@ -43,16 +43,11 @@
*/
#define REX_PROM_MAGIC 0x30464354
-#ifdef CONFIG_64BIT
-
-#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */
-
-#else /* !CONFIG_64BIT */
-
-#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC)
-
-#endif /* !CONFIG_64BIT */
-
+/* KN04 and KN05 are REX PROMs, so only do the check for R3k systems. */
+static inline bool prom_is_rex(u32 magic)
+{
+ return !IS_ENABLED(CONFIG_CPU_R3000) || magic == REX_PROM_MAGIC;
+}
/*
* 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and
From: Tomas Paukrt <[email protected]>
[ Upstream commit 28e9b6d8199a3f124682b143800c2dacdc3d70dd ]
This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.
Fixes: 2e6d793e1bf0 ("crypto: mxs-dcp - Use sg_mapping_iter to copy data")
Signed-off-by: Tomas Paukrt <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/mxs-dcp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index d19e5ffb5104..d6f9e2fe863d 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -331,7 +331,7 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
memset(key + AES_KEYSIZE_128, 0, AES_KEYSIZE_128);
}
- for_each_sg(req->src, src, sg_nents(src), i) {
+ for_each_sg(req->src, src, sg_nents(req->src), i) {
src_buf = sg_virt(src);
len = sg_dma_len(src);
tlen += len;
--
2.34.1
From: Jian Shen <[email protected]>
[ Upstream commit c0f46de30c965d4ba208b5bf1a6d3437a7556ee2 ]
Currently, Port base vlan is initiated by PF and configured to its VFs,
by using command "ip link set <pf name> vf <vf id> vlan <vlan id>".
When a global reset was triggered, the hardware vlan table and the soft
recorded vlan information will be cleared by PF, and restored them until
VFs were ready. There is a short time window between the table had been
cleared and before table restored. If configured a new port base vlan tag
at this moment, driver will check the soft recorded vlan information,
and find there hasn't the old tag in it, which causing a warning print.
Due to the port base vlan is managed by PF, so the VFs's port base vlan
restoring should be handled by PF when PF was ready.
This patch fixes it.
Fixes: 039ba863e8d7 ("net: hns3: optimize the filter table entries handling when resetting")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../hisilicon/hns3/hns3pf/hclge_main.c | 62 +++++++++++++------
.../hisilicon/hns3/hns3pf/hclge_main.h | 3 +
2 files changed, 46 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index b78de80d6c05..4be90d0f2b91 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1863,6 +1863,7 @@ static int hclge_alloc_vport(struct hclge_dev *hdev)
vport->vf_info.link_state = IFLA_VF_LINK_STATE_AUTO;
vport->mps = HCLGE_MAC_DEFAULT_FRAME;
vport->port_base_vlan_cfg.state = HNAE3_PORT_BASE_VLAN_DISABLE;
+ vport->port_base_vlan_cfg.tbl_sta = true;
vport->rxvlan_cfg.rx_vlan_offload_en = true;
vport->req_vlan_fltr_en = true;
INIT_LIST_HEAD(&vport->vlan_list);
@@ -10175,34 +10176,52 @@ void hclge_uninit_vport_vlan_table(struct hclge_dev *hdev)
}
}
-void hclge_restore_vport_vlan_table(struct hclge_vport *vport)
+void hclge_restore_vport_port_base_vlan_config(struct hclge_dev *hdev)
{
- struct hclge_vport_vlan_cfg *vlan, *tmp;
- struct hclge_dev *hdev = vport->back;
+ struct hclge_vlan_info *vlan_info;
+ struct hclge_vport *vport;
u16 vlan_proto;
u16 vlan_id;
u16 state;
+ int vf_id;
int ret;
- vlan_proto = vport->port_base_vlan_cfg.vlan_info.vlan_proto;
- vlan_id = vport->port_base_vlan_cfg.vlan_info.vlan_tag;
- state = vport->port_base_vlan_cfg.state;
+ /* PF should restore all vfs port base vlan */
+ for (vf_id = 0; vf_id < hdev->num_alloc_vfs; vf_id++) {
+ vport = &hdev->vport[vf_id + HCLGE_VF_VPORT_START_NUM];
+ vlan_info = vport->port_base_vlan_cfg.tbl_sta ?
+ &vport->port_base_vlan_cfg.vlan_info :
+ &vport->port_base_vlan_cfg.old_vlan_info;
- if (state != HNAE3_PORT_BASE_VLAN_DISABLE) {
- clear_bit(vport->vport_id, hdev->vlan_table[vlan_id]);
- hclge_set_vlan_filter_hw(hdev, htons(vlan_proto),
- vport->vport_id, vlan_id,
- false);
- return;
+ vlan_id = vlan_info->vlan_tag;
+ vlan_proto = vlan_info->vlan_proto;
+ state = vport->port_base_vlan_cfg.state;
+
+ if (state != HNAE3_PORT_BASE_VLAN_DISABLE) {
+ clear_bit(vport->vport_id, hdev->vlan_table[vlan_id]);
+ ret = hclge_set_vlan_filter_hw(hdev, htons(vlan_proto),
+ vport->vport_id,
+ vlan_id, false);
+ vport->port_base_vlan_cfg.tbl_sta = ret == 0;
+ }
}
+}
- list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
- ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q),
- vport->vport_id,
- vlan->vlan_id, false);
- if (ret)
- break;
- vlan->hd_tbl_status = true;
+void hclge_restore_vport_vlan_table(struct hclge_vport *vport)
+{
+ struct hclge_vport_vlan_cfg *vlan, *tmp;
+ struct hclge_dev *hdev = vport->back;
+ int ret;
+
+ if (vport->port_base_vlan_cfg.state == HNAE3_PORT_BASE_VLAN_DISABLE) {
+ list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
+ ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q),
+ vport->vport_id,
+ vlan->vlan_id, false);
+ if (ret)
+ break;
+ vlan->hd_tbl_status = true;
+ }
}
}
@@ -10243,6 +10262,7 @@ static void hclge_restore_hw_table(struct hclge_dev *hdev)
struct hnae3_handle *handle = &vport->nic;
hclge_restore_mac_table_common(vport);
+ hclge_restore_vport_port_base_vlan_config(hdev);
hclge_restore_vport_vlan_table(vport);
set_bit(HCLGE_STATE_FD_USER_DEF_CHANGED, &hdev->state);
hclge_restore_fd_entries(handle);
@@ -10299,6 +10319,8 @@ static int hclge_update_vlan_filter_entries(struct hclge_vport *vport,
false);
}
+ vport->port_base_vlan_cfg.tbl_sta = false;
+
/* force add VLAN 0 */
ret = hclge_set_vf_vlan_common(hdev, vport->vport_id, false, 0);
if (ret)
@@ -10385,7 +10407,9 @@ int hclge_update_port_base_vlan_cfg(struct hclge_vport *vport, u16 state,
else
nic->port_base_vlan_state = HNAE3_PORT_BASE_VLAN_ENABLE;
+ vport->port_base_vlan_cfg.old_vlan_info = *old_vlan_info;
vport->port_base_vlan_cfg.vlan_info = *vlan_info;
+ vport->port_base_vlan_cfg.tbl_sta = true;
hclge_set_vport_vlan_fltr_change(vport);
return 0;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 2fa6e14c96e5..ae8c26c194ec 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -1000,7 +1000,9 @@ struct hclge_vlan_info {
struct hclge_port_base_vlan_config {
u16 state;
+ bool tbl_sta;
struct hclge_vlan_info vlan_info;
+ struct hclge_vlan_info old_vlan_info;
};
struct hclge_vf_info {
@@ -1124,6 +1126,7 @@ void hclge_rm_vport_all_mac_table(struct hclge_vport *vport, bool is_del_list,
void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list);
void hclge_uninit_vport_vlan_table(struct hclge_dev *hdev);
void hclge_restore_mac_table_common(struct hclge_vport *vport);
+void hclge_restore_vport_port_base_vlan_config(struct hclge_dev *hdev);
void hclge_restore_vport_vlan_table(struct hclge_vport *vport);
int hclge_update_port_base_vlan_cfg(struct hclge_vport *vport, u16 state,
struct hclge_vlan_info *vlan_info);
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 6a6f457ed5fdf6777536c20644a9e42128a50ec2 ]
Check sta_rates pointer value in mt7615_sta_rate_tbl_update routine
since minstrel_ht_update_rates can fail allocating rates array.
Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index fc266da54fe7..60a41d082961 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -682,6 +682,9 @@ static void mt7615_sta_rate_tbl_update(struct ieee80211_hw *hw,
struct ieee80211_sta_rates *sta_rates = rcu_dereference(sta->rates);
int i;
+ if (!sta_rates)
+ return;
+
spin_lock_bh(&dev->mt76.lock);
for (i = 0; i < ARRAY_SIZE(msta->rates); i++) {
msta->rates[i].idx = sta_rates->rate[i].idx;
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 025c6643a81564f066d8381b9e2f4603e0f8438f ]
Add a missing 'host1x_channel_list_free()' call in the remove function,
as already done in the error handling path of the probe function.
Fixes: 8474b02531c4 ("gpu: host1x: Refactor channel allocation code")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/host1x/dev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c
index 3872e4cd2698..fc9f54282f7d 100644
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -526,6 +526,7 @@ static int host1x_remove(struct platform_device *pdev)
host1x_syncpt_deinit(host);
reset_control_assert(host->rst);
clk_disable_unprepare(host->clk);
+ host1x_channel_list_free(&host->channel_list);
host1x_iommu_exit(host);
return 0;
--
2.34.1
From: Yong Wu <[email protected]>
[ Upstream commit 2fb0feed51085db77606de9b9477c96894328809 ]
The platform device is created at:
of_platform_default_populate_init: arch_initcall_sync
->of_platform_populate
->of_platform_device_create_pdata
When entering our probe, all the devices should be already created.
if it is null, means NODEV. Currently we don't get the fail case.
It's a minor fix, no need add fixes tags.
Signed-off-by: Yong Wu <[email protected]>
Acked-by: Joerg Roedel <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/mtk_iommu.c | 2 +-
drivers/iommu/mtk_iommu_v1.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 25b834104790..77ae20ff9b35 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -848,7 +848,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
plarbdev = of_find_device_by_node(larbnode);
if (!plarbdev) {
of_node_put(larbnode);
- return -EPROBE_DEFER;
+ return -ENODEV;
}
data->larb_imu[id].dev = &plarbdev->dev;
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 1467ba1e4417..68bf02f87cfd 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -604,7 +604,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
plarbdev = of_find_device_by_node(larbnode);
if (!plarbdev) {
of_node_put(larbnode);
- return -EPROBE_DEFER;
+ return -ENODEV;
}
data->larb_imu[i].dev = &plarbdev->dev;
--
2.34.1
From: Guilherme G. Piccoli <[email protected]>
commit a1ff1de00db21ecb956213f046b79741b64c6b65 upstream.
Patch series "Some improvements on panic_print".
This is a mix of a documentation fix with some additions to the
"panic_print" syscall / parameter. The goal here is being able to collect
all CPUs backtraces during a panic event and also to enable "panic_print"
in a kdump event - details of the reasoning and design choices in the
patches.
This patch (of 3):
Commit de6da1e8bcf0 ("panic: add an option to replay all the printk
message in buffer") added a new bit to the sysctl/kernel parameter
"panic_print", but the documentation was added only in
kernel-parameters.txt, not in the sysctl guide.
Fix it here by adding bit 5 to sysctl admin-guide documentation.
[[email protected]: fix table format warning]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: de6da1e8bcf0 ("panic: add an option to replay all the printk message in buffer")
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Reviewed-by: Feng Tang <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Samuel Iglesias Gonsalvez <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/sysctl/kernel.rst | 1 +
1 file changed, 1 insertion(+)
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -795,6 +795,7 @@ bit 1 print system memory info
bit 2 print timer info
bit 3 print locks info if ``CONFIG_LOCKDEP`` is on
bit 4 print ftrace buffer
+bit 5 print all printk messages in buffer
===== ============================================
So for example to print tasks and memory info on panic, user can::
From: Juhyung Park <[email protected]>
commit 680af5b824a52faa819167628665804a14f0e0df upstream.
cnt should be passed to sb_has_quota_active() instead of type to check
active quota properly.
Moreover, when the type is -1, the compiler with enough inline knowledge
can discard sb_has_quota_active() check altogether, causing a NULL pointer
dereference at the following inode_lock(dqopt->files[cnt]):
[ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 2.796024] Mem abort info:
[ 2.796025] ESR = 0x96000005
[ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.796029] SET = 0, FnV = 0
[ 2.796031] EA = 0, S1PTW = 0
[ 2.796032] Data abort info:
[ 2.796034] ISV = 0, ISS = 0x00000005
[ 2.796035] CM = 0, WnR = 0
[ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000
[ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000
[ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1
[ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT)
[ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO)
[ 2.796065] pc : down_write+0x28/0x70
[ 2.796070] lr : f2fs_quota_sync+0x100/0x294
[ 2.796071] sp : ffffffa3f48ffc30
[ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000
[ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80
[ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001
[ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000
[ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110
[ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038
[ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0
[ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0
[ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000
[ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948
[ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0
[ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a
[ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d
[ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001
[ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0
[ 2.796098] Call trace:
[ 2.796100] down_write+0x28/0x70
[ 2.796102] f2fs_quota_sync+0x100/0x294
[ 2.796104] block_operations+0x120/0x204
[ 2.796106] f2fs_write_checkpoint+0x11c/0x520
[ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34
[ 2.796109] issue_checkpoint_thread+0x6c/0xb8
[ 2.796112] kthread+0x138/0x414
[ 2.796114] ret_from_fork+0x10/0x18
[ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02)
[ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]---
[ 2.800116] Kernel panic - not syncing: Fatal exception
[ 2.800120] SMP: stopping secondary CPUs
Fixes: 9de71ede81e6 ("f2fs: quota: fix potential deadlock")
Cc: <[email protected]> # v5.15+
Signed-off-by: Juhyung Park <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/super.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2676,7 +2676,7 @@ int f2fs_quota_sync(struct super_block *
struct f2fs_sb_info *sbi = F2FS_SB(sb);
struct quota_info *dqopt = sb_dqopt(sb);
int cnt;
- int ret;
+ int ret = 0;
/*
* Now when everything is written we can discard the pagecache so
@@ -2687,8 +2687,8 @@ int f2fs_quota_sync(struct super_block *
if (type != -1 && cnt != type)
continue;
- if (!sb_has_quota_active(sb, type))
- return 0;
+ if (!sb_has_quota_active(sb, cnt))
+ continue;
inode_lock(dqopt->files[cnt]);
From: Tom Rix <[email protected]>
[ Upstream commit 430e6a0212b2a0eb1de5e9d47a016fa79edf3978 ]
clang static analysis reports this represenative problem
amdgpu_smu.c:144:18: warning: The left operand of '*' is a garbage value
return clk_freq * 100;
~~~~~~~~ ^
If there is no get_dpm_ultimate_freq function,
smu_get_dpm_freq_range returns success without setting the
output min,max parameters. So return an -ENOTSUPP error.
Fixes: e5ef784b1e17 ("drm/amd/powerplay: revise calling chain on retrieving frequency range")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index 6dc83cfad9d8..8acdb244b99f 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -138,7 +138,7 @@ int smu_get_dpm_freq_range(struct smu_context *smu,
uint32_t *min,
uint32_t *max)
{
- int ret = 0;
+ int ret = -ENOTSUPP;
if (!min && !max)
return -EINVAL;
--
2.34.1
From: Xiang Chen <[email protected]>
[ Upstream commit c4e070457a93705e56ed06b3910d9e5fe56d3be3 ]
Currently the permission of parameter prot_mask is 0x0, which means that
the member does not appear in sysfs. Change it as other module parameters
to 0444 for world-readable.
[mkp: s/v3/v2/]
Link: https://lore.kernel.org/r/[email protected]
Fixes: d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw")
Reported-by: Yihang Li <[email protected]>
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 3ab669dc806f..1942970f9eb7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -527,7 +527,7 @@ MODULE_PARM_DESC(intr_conv, "interrupt converge enable (0-1)");
/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
static int prot_mask;
-module_param(prot_mask, int, 0);
+module_param(prot_mask, int, 0444);
MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=0x0 ");
static void debugfs_work_handler_v3_hw(struct work_struct *work);
--
2.34.1
From: Colin Ian King <[email protected]>
[ Upstream commit c305c94bdc18e45b5ad1db54da4269f8cbfdff6b ]
Currently the error -EIO is being assinged to variable ret when
the READY_BIT is not set but the function iwlagn_mac_start returns
0 rather than ret. Fix this by returning ret instead of 0.
Addresses-Coverity: ("Unused value")
Fixes: 7335613ae27a ("iwlwifi: move all mac80211 related functions to one place")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c
index 75e7665773c5..90fe4adca492 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c
@@ -304,7 +304,7 @@ static int iwlagn_mac_start(struct ieee80211_hw *hw)
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
- return 0;
+ return ret;
}
static void iwlagn_mac_stop(struct ieee80211_hw *hw)
--
2.34.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 4d06f92f38b799295ae22c98be7a20cac3e2a1a7 ]
The function devm_kzalloc() in rt5663_parse_dp() can fail, so its return
value should be checked.
Fixes: 457c25efc592 ("ASoC: rt5663: Add the function of impedance sensing")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5663.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index ee09ccd448dc..4aba6e106ee4 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -3478,6 +3478,8 @@ static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)
table_size = sizeof(struct impedance_mapping_table) *
rt5663->pdata.impedance_sensing_num;
rt5663->imp_table = devm_kzalloc(dev, table_size, GFP_KERNEL);
+ if (!rt5663->imp_table)
+ return -ENOMEM;
ret = device_property_read_u32_array(dev,
"realtek,impedance_sensing_table",
(u32 *)rt5663->imp_table, table_size);
--
2.34.1
From: Joel Stanley <[email protected]>
[ Upstream commit ab1b79159ad5a6dc4e4994b49737f7feb13b7155 ]
In commit f72ddbe1d7b7 ("fsi: scom: Remove retries") the retries were
removed from get and put scoms. That patch missed the retires in get and
put indirect scom.
For the same reason, remove them from the scom driver to allow the
caller to decide to retry.
This removes the following special case which would have caused the
retry code to return early:
- if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
- return 0;
I believe this case is handled.
Fixes: f72ddbe1d7b7 ("fsi: scom: Remove retries")
Signed-off-by: Joel Stanley <[email protected]>
Reviewed-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/fsi/fsi-scom.c | 41 +++++++++++++++--------------------------
1 file changed, 15 insertions(+), 26 deletions(-)
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
index 3b427f7e9027..bcb756dc9866 100644
--- a/drivers/fsi/fsi-scom.c
+++ b/drivers/fsi/fsi-scom.c
@@ -145,7 +145,7 @@ static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value,
uint64_t addr, uint32_t *status)
{
uint64_t ind_data, ind_addr;
- int rc, retries, err = 0;
+ int rc, err;
if (value & ~XSCOM_DATA_IND_DATA)
return -EINVAL;
@@ -156,19 +156,14 @@ static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value,
if (rc || (*status & SCOM_STATUS_ANY_ERR))
return rc;
- for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
- rc = __get_scom(scom, &ind_data, addr, status);
- if (rc || (*status & SCOM_STATUS_ANY_ERR))
- return rc;
+ rc = __get_scom(scom, &ind_data, addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
- err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
- *status = err << SCOM_STATUS_PIB_RESP_SHIFT;
- if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
- return 0;
+ err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
+ *status = err << SCOM_STATUS_PIB_RESP_SHIFT;
- msleep(1);
- }
- return rc;
+ return 0;
}
static int put_indirect_scom_form1(struct scom_device *scom, uint64_t value,
@@ -188,7 +183,7 @@ static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value,
uint64_t addr, uint32_t *status)
{
uint64_t ind_data, ind_addr;
- int rc, retries, err = 0;
+ int rc, err;
ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | XSCOM_DATA_IND_READ;
@@ -196,21 +191,15 @@ static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value,
if (rc || (*status & SCOM_STATUS_ANY_ERR))
return rc;
- for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
- rc = __get_scom(scom, &ind_data, addr, status);
- if (rc || (*status & SCOM_STATUS_ANY_ERR))
- return rc;
-
- err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
- *status = err << SCOM_STATUS_PIB_RESP_SHIFT;
- *value = ind_data & XSCOM_DATA_IND_DATA;
+ rc = __get_scom(scom, &ind_data, addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
- if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
- return 0;
+ err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
+ *status = err << SCOM_STATUS_PIB_RESP_SHIFT;
+ *value = ind_data & XSCOM_DATA_IND_DATA;
- msleep(1);
- }
- return rc;
+ return 0;
}
static int raw_put_scom(struct scom_device *scom, uint64_t value,
--
2.34.1
From: Bjorn Helgaas <[email protected]>
[ Upstream commit 63cd736f449445edcd7f0bcc7d84453e9beec0aa ]
Some ATI SB600 USB adapters advertise MSI, but if INTx is disabled by
setting PCI_COMMAND_INTX_DISABLE, MSI doesn't work either. The PCI/PCIe
specs do not require software to set PCI_COMMAND_INTX_DISABLE when enabling
MSI, but Linux has done that for many years.
Mick reported that 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI
devices") broke these devices. Prior to 306c54d0edb6, they used INTx.
Starting with 306c54d0edb6, they use MSI, and and the fact that Linux sets
PCI_COMMAND_INTX_DISABLE means both INTx and MSI are disabled on these
devices.
Avoid this SB600 defect by disabling MSI so we use INTx as before.
Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices")
Link: https://lore.kernel.org/r/[email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215690
Link: https://lore.kernel.org/all/PxIByDyBRcsbpcmVhGSNDFAoUcMmb78ctXCkw6fbpx25TGlCHvA6SJjjFkNr1FfQZMntYPTNyvEnblxzAZ8a6jP9ddLpKeCN6Chi_2FuexU=@protonmail.com/
Link: https://lore.kernel.org/r/[email protected]
BugLink: https://lore.kernel.org/all/[email protected]/
Reported-by: Mick Lorain <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/quirks.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e7cd8b504535..4893b1e82403 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1811,6 +1811,18 @@ static void quirk_alder_ioapic(struct pci_dev *pdev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic);
#endif
+static void quirk_no_msi(struct pci_dev *dev)
+{
+ pci_info(dev, "avoiding MSI to work around a hardware defect\n");
+ dev->no_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4386, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4387, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4388, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4389, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x438a, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x438b, quirk_no_msi);
+
static void quirk_pcie_mch(struct pci_dev *pdev)
{
pdev->no_msi = 1;
--
2.34.1
From: Valentin Schneider <[email protected]>
[ Upstream commit 25795ef6299f07ce3838f3253a9cb34f64efcfae ]
TASK_RTLOCK_WAIT currently isn't part of TASK_REPORT, thus a task blocking
on an rtlock will appear as having a task state == 0, IOW TASK_RUNNING.
The actual state is saved in p->saved_state, but reading it after reading
p->__state has a few issues:
o that could still be TASK_RUNNING in the case of e.g. rt_spin_lock
o ttwu_state_match() might have changed that to TASK_RUNNING
As pointed out by Eric, adding TASK_RTLOCK_WAIT to TASK_REPORT implies
exposing a new state to userspace tools which way not know what to do with
them. The only information that needs to be conveyed here is that a task is
waiting on an rt_mutex, which matches TASK_UNINTERRUPTIBLE - there's no
need for a new state.
Reported-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sched.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8fcf76fed984..031588cd2ccb 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1626,6 +1626,14 @@ static inline unsigned int __task_state_index(unsigned int tsk_state,
if (tsk_state == TASK_IDLE)
state = TASK_REPORT_IDLE;
+ /*
+ * We're lying here, but rather than expose a completely new task state
+ * to userspace, we can make this appear as if the task has gone through
+ * a regular rt_mutex_lock() call.
+ */
+ if (tsk_state == TASK_RTLOCK_WAIT)
+ state = TASK_UNINTERRUPTIBLE;
+
return fls(state);
}
--
2.34.1
From: Kuogee Hsieh <[email protected]>
[ Upstream commit 9051d629dbf7a998a40f7eac65a9512b01bc3bb8 ]
Each DP link training contains link training 1 followed by link
training 2. There is maximum of 5 retries of DP link training
before declared link training failed. It is required to stop link
training at end of link training 2 if it is failed so that next
link training 1 can start freshly. This patch fixes link compliance
test case 4.3.1.13 (Source Device Link Training EQ Fallback Test).
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 62e75dc8afc6..4af281d97493 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1744,6 +1744,9 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
/* end with failure */
break; /* lane == 1 already */
}
+
+ /* stop link training before start re training */
+ dp_ctrl_clear_training_pattern(ctrl);
}
}
--
2.34.1
From: Yufeng Mo <[email protected]>
[ Upstream commit 4f331fda35f1695af8ddd8180edc948880def74b ]
Printing the whole MAC addresse may bring security risks. Therefore,
the MAC address is partially encrypted to improve security.
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 14 +++++
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 29 +++++++---
.../hisilicon/hns3/hns3pf/hclge_main.c | 55 ++++++++++++-------
.../hisilicon/hns3/hns3vf/hclgevf_main.c | 7 ++-
4 files changed, 74 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 47bba4c62f04..4aa6d21f2fd8 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -852,6 +852,20 @@ struct hnae3_handle {
#define hnae3_get_bit(origin, shift) \
hnae3_get_field(origin, 0x1 << (shift), shift)
+#define HNAE3_FORMAT_MAC_ADDR_LEN 18
+#define HNAE3_FORMAT_MAC_ADDR_OFFSET_0 0
+#define HNAE3_FORMAT_MAC_ADDR_OFFSET_4 4
+#define HNAE3_FORMAT_MAC_ADDR_OFFSET_5 5
+
+static inline void hnae3_format_mac_addr(char *format_mac_addr,
+ const u8 *mac_addr)
+{
+ snprintf(format_mac_addr, HNAE3_FORMAT_MAC_ADDR_LEN, "%02x:**:**:**:%02x:%02x",
+ mac_addr[HNAE3_FORMAT_MAC_ADDR_OFFSET_0],
+ mac_addr[HNAE3_FORMAT_MAC_ADDR_OFFSET_4],
+ mac_addr[HNAE3_FORMAT_MAC_ADDR_OFFSET_5]);
+}
+
int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev);
void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 4b886a13e079..e4f6b5a8537c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2255,6 +2255,8 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
static int hns3_nic_net_set_mac_address(struct net_device *netdev, void *p)
{
+ char format_mac_addr_perm[HNAE3_FORMAT_MAC_ADDR_LEN];
+ char format_mac_addr_sa[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hnae3_handle *h = hns3_get_handle(netdev);
struct sockaddr *mac_addr = p;
int ret;
@@ -2263,8 +2265,9 @@ static int hns3_nic_net_set_mac_address(struct net_device *netdev, void *p)
return -EADDRNOTAVAIL;
if (ether_addr_equal(netdev->dev_addr, mac_addr->sa_data)) {
- netdev_info(netdev, "already using mac address %pM\n",
- mac_addr->sa_data);
+ hnae3_format_mac_addr(format_mac_addr_sa, mac_addr->sa_data);
+ netdev_info(netdev, "already using mac address %s\n",
+ format_mac_addr_sa);
return 0;
}
@@ -2273,8 +2276,10 @@ static int hns3_nic_net_set_mac_address(struct net_device *netdev, void *p)
*/
if (!hns3_is_phys_func(h->pdev) &&
!is_zero_ether_addr(netdev->perm_addr)) {
- netdev_err(netdev, "has permanent MAC %pM, user MAC %pM not allow\n",
- netdev->perm_addr, mac_addr->sa_data);
+ hnae3_format_mac_addr(format_mac_addr_perm, netdev->perm_addr);
+ hnae3_format_mac_addr(format_mac_addr_sa, mac_addr->sa_data);
+ netdev_err(netdev, "has permanent MAC %s, user MAC %s not allow\n",
+ format_mac_addr_perm, format_mac_addr_sa);
return -EPERM;
}
@@ -2836,14 +2841,16 @@ static int hns3_nic_set_vf_rate(struct net_device *ndev, int vf,
static int hns3_nic_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
{
struct hnae3_handle *h = hns3_get_handle(netdev);
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
if (!h->ae_algo->ops->set_vf_mac)
return -EOPNOTSUPP;
if (is_multicast_ether_addr(mac)) {
+ hnae3_format_mac_addr(format_mac_addr, mac);
netdev_err(netdev,
- "Invalid MAC:%pM specified. Could not set MAC\n",
- mac);
+ "Invalid MAC:%s specified. Could not set MAC\n",
+ format_mac_addr);
return -EINVAL;
}
@@ -4927,6 +4934,7 @@ static void hns3_uninit_all_ring(struct hns3_nic_priv *priv)
static int hns3_init_mac_addr(struct net_device *netdev)
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hnae3_handle *h = priv->ae_handle;
u8 mac_addr_temp[ETH_ALEN];
int ret = 0;
@@ -4937,8 +4945,9 @@ static int hns3_init_mac_addr(struct net_device *netdev)
/* Check if the MAC address is valid, if not get a random one */
if (!is_valid_ether_addr(mac_addr_temp)) {
eth_hw_addr_random(netdev);
- dev_warn(priv->dev, "using random MAC address %pM\n",
- netdev->dev_addr);
+ hnae3_format_mac_addr(format_mac_addr, netdev->dev_addr);
+ dev_warn(priv->dev, "using random MAC address %s\n",
+ format_mac_addr);
} else if (!ether_addr_equal(netdev->dev_addr, mac_addr_temp)) {
ether_addr_copy(netdev->dev_addr, mac_addr_temp);
ether_addr_copy(netdev->perm_addr, mac_addr_temp);
@@ -4990,8 +4999,10 @@ static void hns3_client_stop(struct hnae3_handle *handle)
static void hns3_info_show(struct hns3_nic_priv *priv)
{
struct hnae3_knic_private_info *kinfo = &priv->ae_handle->kinfo;
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
- dev_info(priv->dev, "MAC address: %pM\n", priv->netdev->dev_addr);
+ hnae3_format_mac_addr(format_mac_addr, priv->netdev->dev_addr);
+ dev_info(priv->dev, "MAC address: %s\n", format_mac_addr);
dev_info(priv->dev, "Task queue pairs numbers: %u\n", kinfo->num_tqps);
dev_info(priv->dev, "RSS size: %u\n", kinfo->rss_size);
dev_info(priv->dev, "Allocated RSS size: %u\n", kinfo->req_rss_size);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index af6c4a5cb0a2..0b0b79eec1a6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -8570,6 +8570,7 @@ int hclge_update_mac_list(struct hclge_vport *vport,
enum HCLGE_MAC_ADDR_TYPE mac_type,
const unsigned char *addr)
{
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hclge_dev *hdev = vport->back;
struct hclge_mac_node *mac_node;
struct list_head *list;
@@ -8594,9 +8595,10 @@ int hclge_update_mac_list(struct hclge_vport *vport,
/* if this address is never added, unnecessary to delete */
if (state == HCLGE_MAC_TO_DEL) {
spin_unlock_bh(&vport->mac_list_lock);
+ hnae3_format_mac_addr(format_mac_addr, addr);
dev_err(&hdev->pdev->dev,
- "failed to delete address %pM from mac list\n",
- addr);
+ "failed to delete address %s from mac list\n",
+ format_mac_addr);
return -ENOENT;
}
@@ -8629,6 +8631,7 @@ static int hclge_add_uc_addr(struct hnae3_handle *handle,
int hclge_add_uc_addr_common(struct hclge_vport *vport,
const unsigned char *addr)
{
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hclge_dev *hdev = vport->back;
struct hclge_mac_vlan_tbl_entry_cmd req;
struct hclge_desc desc;
@@ -8639,9 +8642,10 @@ int hclge_add_uc_addr_common(struct hclge_vport *vport,
if (is_zero_ether_addr(addr) ||
is_broadcast_ether_addr(addr) ||
is_multicast_ether_addr(addr)) {
+ hnae3_format_mac_addr(format_mac_addr, addr);
dev_err(&hdev->pdev->dev,
- "Set_uc mac err! invalid mac:%pM. is_zero:%d,is_br=%d,is_mul=%d\n",
- addr, is_zero_ether_addr(addr),
+ "Set_uc mac err! invalid mac:%s. is_zero:%d,is_br=%d,is_mul=%d\n",
+ format_mac_addr, is_zero_ether_addr(addr),
is_broadcast_ether_addr(addr),
is_multicast_ether_addr(addr));
return -EINVAL;
@@ -8698,6 +8702,7 @@ static int hclge_rm_uc_addr(struct hnae3_handle *handle,
int hclge_rm_uc_addr_common(struct hclge_vport *vport,
const unsigned char *addr)
{
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hclge_dev *hdev = vport->back;
struct hclge_mac_vlan_tbl_entry_cmd req;
int ret;
@@ -8706,8 +8711,9 @@ int hclge_rm_uc_addr_common(struct hclge_vport *vport,
if (is_zero_ether_addr(addr) ||
is_broadcast_ether_addr(addr) ||
is_multicast_ether_addr(addr)) {
- dev_dbg(&hdev->pdev->dev, "Remove mac err! invalid mac:%pM.\n",
- addr);
+ hnae3_format_mac_addr(format_mac_addr, addr);
+ dev_dbg(&hdev->pdev->dev, "Remove mac err! invalid mac:%s.\n",
+ format_mac_addr);
return -EINVAL;
}
@@ -8737,6 +8743,7 @@ static int hclge_add_mc_addr(struct hnae3_handle *handle,
int hclge_add_mc_addr_common(struct hclge_vport *vport,
const unsigned char *addr)
{
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hclge_dev *hdev = vport->back;
struct hclge_mac_vlan_tbl_entry_cmd req;
struct hclge_desc desc[3];
@@ -8744,9 +8751,10 @@ int hclge_add_mc_addr_common(struct hclge_vport *vport,
/* mac addr check */
if (!is_multicast_ether_addr(addr)) {
+ hnae3_format_mac_addr(format_mac_addr, addr);
dev_err(&hdev->pdev->dev,
- "Add mc mac err! invalid mac:%pM.\n",
- addr);
+ "Add mc mac err! invalid mac:%s.\n",
+ format_mac_addr);
return -EINVAL;
}
memset(&req, 0, sizeof(req));
@@ -8782,6 +8790,7 @@ static int hclge_rm_mc_addr(struct hnae3_handle *handle,
int hclge_rm_mc_addr_common(struct hclge_vport *vport,
const unsigned char *addr)
{
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hclge_dev *hdev = vport->back;
struct hclge_mac_vlan_tbl_entry_cmd req;
enum hclge_cmd_status status;
@@ -8789,9 +8798,10 @@ int hclge_rm_mc_addr_common(struct hclge_vport *vport,
/* mac addr check */
if (!is_multicast_ether_addr(addr)) {
+ hnae3_format_mac_addr(format_mac_addr, addr);
dev_dbg(&hdev->pdev->dev,
- "Remove mc mac err! invalid mac:%pM.\n",
- addr);
+ "Remove mc mac err! invalid mac:%s.\n",
+ format_mac_addr);
return -EINVAL;
}
@@ -9257,16 +9267,18 @@ static int hclge_set_vf_mac(struct hnae3_handle *handle, int vf,
u8 *mac_addr)
{
struct hclge_vport *vport = hclge_get_vport(handle);
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hclge_dev *hdev = vport->back;
vport = hclge_get_vf_vport(hdev, vf);
if (!vport)
return -EINVAL;
+ hnae3_format_mac_addr(format_mac_addr, mac_addr);
if (ether_addr_equal(mac_addr, vport->vf_info.mac)) {
dev_info(&hdev->pdev->dev,
- "Specified MAC(=%pM) is same as before, no change committed!\n",
- mac_addr);
+ "Specified MAC(=%s) is same as before, no change committed!\n",
+ format_mac_addr);
return 0;
}
@@ -9280,13 +9292,13 @@ static int hclge_set_vf_mac(struct hnae3_handle *handle, int vf,
if (test_bit(HCLGE_VPORT_STATE_ALIVE, &vport->state)) {
dev_info(&hdev->pdev->dev,
- "MAC of VF %d has been set to %pM, and it will be reinitialized!\n",
- vf, mac_addr);
+ "MAC of VF %d has been set to %s, and it will be reinitialized!\n",
+ vf, format_mac_addr);
return hclge_inform_reset_assert_to_vf(vport);
}
- dev_info(&hdev->pdev->dev, "MAC of VF %d has been set to %pM\n",
- vf, mac_addr);
+ dev_info(&hdev->pdev->dev, "MAC of VF %d has been set to %s\n",
+ vf, format_mac_addr);
return 0;
}
@@ -9390,6 +9402,7 @@ static int hclge_set_mac_addr(struct hnae3_handle *handle, void *p,
{
const unsigned char *new_addr = (const unsigned char *)p;
struct hclge_vport *vport = hclge_get_vport(handle);
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hclge_dev *hdev = vport->back;
unsigned char *old_addr = NULL;
int ret;
@@ -9398,9 +9411,10 @@ static int hclge_set_mac_addr(struct hnae3_handle *handle, void *p,
if (is_zero_ether_addr(new_addr) ||
is_broadcast_ether_addr(new_addr) ||
is_multicast_ether_addr(new_addr)) {
+ hnae3_format_mac_addr(format_mac_addr, new_addr);
dev_err(&hdev->pdev->dev,
- "change uc mac err! invalid mac: %pM.\n",
- new_addr);
+ "change uc mac err! invalid mac: %s.\n",
+ format_mac_addr);
return -EINVAL;
}
@@ -9418,9 +9432,10 @@ static int hclge_set_mac_addr(struct hnae3_handle *handle, void *p,
spin_lock_bh(&vport->mac_list_lock);
ret = hclge_update_mac_node_for_dev_addr(vport, old_addr, new_addr);
if (ret) {
+ hnae3_format_mac_addr(format_mac_addr, new_addr);
dev_err(&hdev->pdev->dev,
- "failed to change the mac addr:%pM, ret = %d\n",
- new_addr, ret);
+ "failed to change the mac addr:%s, ret = %d\n",
+ format_mac_addr, ret);
spin_unlock_bh(&vport->mac_list_lock);
if (!is_first)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 417a08d600b8..98c847fe4c5b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1514,15 +1514,18 @@ static void hclgevf_config_mac_list(struct hclgevf_dev *hdev,
struct list_head *list,
enum HCLGEVF_MAC_ADDR_TYPE mac_type)
{
+ char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN];
struct hclgevf_mac_addr_node *mac_node, *tmp;
int ret;
list_for_each_entry_safe(mac_node, tmp, list, node) {
ret = hclgevf_add_del_mac_addr(hdev, mac_node, mac_type);
if (ret) {
+ hnae3_format_mac_addr(format_mac_addr,
+ mac_node->mac_addr);
dev_err(&hdev->pdev->dev,
- "failed to configure mac %pM, state = %d, ret = %d\n",
- mac_node->mac_addr, mac_node->state, ret);
+ "failed to configure mac %s, state = %d, ret = %d\n",
+ format_mac_addr, mac_node->state, ret);
return;
}
if (mac_node->state == HCLGEVF_MAC_TO_ADD) {
--
2.34.1
From: Paolo Bonzini <[email protected]>
commit 2a8859f373b0a86f0ece8ec8312607eacf12485d upstream.
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <[email protected]>
Reported-by: Gaoning Pan <[email protected]>
Reported-by: Yongkang Jia <[email protected]>
Reported-by: [email protected]
Debugged-by: Tadeusz Struk <[email protected]>
Tested-by: Maxim Levitsky <[email protected]>
Cc: [email protected]
Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/paging_tmpl.h | 77 +++++++++++++++++++----------------------
1 file changed, 37 insertions(+), 40 deletions(-)
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -34,9 +34,8 @@
#define PT_HAVE_ACCESSED_DIRTY(mmu) true
#ifdef CONFIG_X86_64
#define PT_MAX_FULL_LEVELS PT64_ROOT_MAX_LEVEL
- #define CMPXCHG cmpxchg
+ #define CMPXCHG "cmpxchgq"
#else
- #define CMPXCHG cmpxchg64
#define PT_MAX_FULL_LEVELS 2
#endif
#elif PTTYPE == 32
@@ -52,7 +51,7 @@
#define PT_GUEST_DIRTY_SHIFT PT_DIRTY_SHIFT
#define PT_GUEST_ACCESSED_SHIFT PT_ACCESSED_SHIFT
#define PT_HAVE_ACCESSED_DIRTY(mmu) true
- #define CMPXCHG cmpxchg
+ #define CMPXCHG "cmpxchgl"
#elif PTTYPE == PTTYPE_EPT
#define pt_element_t u64
#define guest_walker guest_walkerEPT
@@ -65,7 +64,9 @@
#define PT_GUEST_DIRTY_SHIFT 9
#define PT_GUEST_ACCESSED_SHIFT 8
#define PT_HAVE_ACCESSED_DIRTY(mmu) ((mmu)->ept_ad)
- #define CMPXCHG cmpxchg64
+ #ifdef CONFIG_X86_64
+ #define CMPXCHG "cmpxchgq"
+ #endif
#define PT_MAX_FULL_LEVELS PT64_ROOT_MAX_LEVEL
#else
#error Invalid PTTYPE value
@@ -147,43 +148,39 @@ static int FNAME(cmpxchg_gpte)(struct kv
pt_element_t __user *ptep_user, unsigned index,
pt_element_t orig_pte, pt_element_t new_pte)
{
- int npages;
- pt_element_t ret;
- pt_element_t *table;
- struct page *page;
-
- npages = get_user_pages_fast((unsigned long)ptep_user, 1, FOLL_WRITE, &page);
- if (likely(npages == 1)) {
- table = kmap_atomic(page);
- ret = CMPXCHG(&table[index], orig_pte, new_pte);
- kunmap_atomic(table);
-
- kvm_release_page_dirty(page);
- } else {
- struct vm_area_struct *vma;
- unsigned long vaddr = (unsigned long)ptep_user & PAGE_MASK;
- unsigned long pfn;
- unsigned long paddr;
-
- mmap_read_lock(current->mm);
- vma = find_vma_intersection(current->mm, vaddr, vaddr + PAGE_SIZE);
- if (!vma || !(vma->vm_flags & VM_PFNMAP)) {
- mmap_read_unlock(current->mm);
- return -EFAULT;
- }
- pfn = ((vaddr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
- paddr = pfn << PAGE_SHIFT;
- table = memremap(paddr, PAGE_SIZE, MEMREMAP_WB);
- if (!table) {
- mmap_read_unlock(current->mm);
- return -EFAULT;
- }
- ret = CMPXCHG(&table[index], orig_pte, new_pte);
- memunmap(table);
- mmap_read_unlock(current->mm);
- }
+ int r = -EFAULT;
+
+ if (!user_access_begin(ptep_user, sizeof(pt_element_t)))
+ return -EFAULT;
+
+#ifdef CMPXCHG
+ asm volatile("1:" LOCK_PREFIX CMPXCHG " %[new], %[ptr]\n"
+ "mov $0, %[r]\n"
+ "setnz %b[r]\n"
+ "2:"
+ _ASM_EXTABLE_UA(1b, 2b)
+ : [ptr] "+m" (*ptep_user),
+ [old] "+a" (orig_pte),
+ [r] "+q" (r)
+ : [new] "r" (new_pte)
+ : "memory");
+#else
+ asm volatile("1:" LOCK_PREFIX "cmpxchg8b %[ptr]\n"
+ "movl $0, %[r]\n"
+ "jz 2f\n"
+ "incl %[r]\n"
+ "2:"
+ _ASM_EXTABLE_UA(1b, 2b)
+ : [ptr] "+m" (*ptep_user),
+ [old] "+A" (orig_pte),
+ [r] "+rm" (r)
+ : [new_lo] "b" ((u32)new_pte),
+ [new_hi] "c" ((u32)(new_pte >> 32))
+ : "memory");
+#endif
- return (ret != orig_pte);
+ user_access_end();
+ return r;
}
static bool FNAME(prefetch_invalid_gpte)(struct kvm_vcpu *vcpu,
From: Casey Schaufler <[email protected]>
[ Upstream commit a5cd1ab7ab679d252a6d2f483eee7d45ebf2040c ]
Remove inappropriate use of ntohs() and assign the
port value directly.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smack_lsm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 21a0e7c3b8de..3f3f56f6be4d 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -2505,7 +2505,7 @@ static int smk_ipv6_check(struct smack_known *subject,
#ifdef CONFIG_AUDIT
smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
ad.a.u.net->family = PF_INET6;
- ad.a.u.net->dport = ntohs(address->sin6_port);
+ ad.a.u.net->dport = address->sin6_port;
if (act == SMK_RECEIVING)
ad.a.u.net->v6info.saddr = address->sin6_addr;
else
--
2.34.1
From: Anton Ivanov <[email protected]>
commit 1a3a6a2a035bb6c3a7ef4c788d8fd69a7b2d6284 upstream.
Moving to an EPOLL based IRQ controller broke uml_mconsole stop/go
commands. This fixes it and restores stop/go functionality.
Fixes: ff6a17989c08 ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/um/drivers/mconsole_kern.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -224,7 +224,7 @@ void mconsole_go(struct mc_request *req)
void mconsole_stop(struct mc_request *req)
{
- deactivate_fd(req->originating_fd, MCONSOLE_IRQ);
+ block_signals();
os_set_fd_block(req->originating_fd, 1);
mconsole_reply(req, "stopped", 0, 0);
for (;;) {
@@ -247,6 +247,7 @@ void mconsole_stop(struct mc_request *re
}
os_set_fd_block(req->originating_fd, 0);
mconsole_reply(req, "", 0, 0);
+ unblock_signals();
}
static DEFINE_SPINLOCK(mc_devices_lock);
From: Vitaly Kuznetsov <[email protected]>
commit 7321f47eada53a395fb3086d49297eebb19e8e58 upstream.
When TLB flush hypercalls (HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX are
issued in 'XMM fast' mode, the maximum number of allowed sparse_banks is
not 'HV_HYPERCALL_MAX_XMM_REGISTERS - 1' (5) but twice as many (10) as each
XMM register is 128 bit long and can hold two 64 bit long banks.
Cc: [email protected] # 5.14.x
Fixes: 5974565bc26d ("KVM: x86: kvm_hv_flush_tlb use inputs from XMM registers")
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/hyperv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1820,7 +1820,8 @@ static u64 kvm_hv_flush_tlb(struct kvm_v
if (!all_cpus) {
if (hc->fast) {
- if (sparse_banks_len > HV_HYPERCALL_MAX_XMM_REGISTERS - 1)
+ /* XMM0 is already consumed, each XMM holds two sparse banks. */
+ if (sparse_banks_len > 2 * (HV_HYPERCALL_MAX_XMM_REGISTERS - 1))
return HV_STATUS_INVALID_HYPERCALL_INPUT;
for (i = 0; i < sparse_banks_len; i += 2) {
sparse_banks[i] = sse128_lo(hc->xmm[i / 2 + 1]);
From: Chen Jingwen <[email protected]>
commit dd75080aa8409ce10d50fb58981c6b59bf8707d3 upstream.
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr f57f3be0 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1
Call Trace:
[c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable)
[c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300
[c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200
[c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0
[c80d1cc0] [c03018a4] memset+0x34/0x90
[c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50
[c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570
[c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0
[c80d1db0] [c2036580] init_sd+0xc4/0x1d0
[c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c
[c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384
[c80d1ef0] [c0004b14] kernel_init+0x24/0x170
[c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64
Memory state around the buggy address:
f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan
Fixes: cbd18991e24fe ("powerpc/mm: Fix an Oops in kasan_mmu_init()")
Cc: [email protected] # 5.4.x
Signed-off-by: Chen Jingwen <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/kasan/kasan_init_32.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -83,13 +83,12 @@ void __init
kasan_update_early_region(unsigned long k_start, unsigned long k_end, pte_t pte)
{
unsigned long k_cur;
- phys_addr_t pa = __pa(kasan_early_shadow_page);
for (k_cur = k_start; k_cur != k_end; k_cur += PAGE_SIZE) {
pmd_t *pmd = pmd_off_k(k_cur);
pte_t *ptep = pte_offset_kernel(pmd, k_cur);
- if ((pte_val(*ptep) & PTE_RPN_MASK) != pa)
+ if (pte_page(*ptep) != virt_to_page(lm_alias(kasan_early_shadow_page)))
continue;
__set_pte_at(&init_mm, k_cur, ptep, pte, 0);
From: Pavel Begunkov <[email protected]>
commit c86d18f4aa93e0e66cda0e55827cd03eea6bc5f8 upstream.
When there are no files for __io_sqe_files_scm() to process in the
range, it'll free everything and return. However, it forgets to put uid.
Fixes: 08a451739a9b5 ("io_uring: allow sparse fixed file sets")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/accee442376f33ce8aaebb099d04967533efde92.1648226048.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/io_uring.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -8130,6 +8130,7 @@ static int __io_sqe_files_scm(struct io_
fput(fpl->fp[i]);
} else {
kfree_skb(skb);
+ free_uid(fpl->user);
kfree(fpl);
}
From: Tom Rix <[email protected]>
commit fa7b514d2b2894e052b8e94c7a29feb98e90093f upstream.
Clang static analysis reports this issue:
| mcp251xfd-core.c:1813:7: warning: The left operand
| of '&' is a garbage value
| FIELD_GET(MCP251XFD_REG_DEVID_ID_MASK, dev_id),
| ^ ~~~~~~
dev_id is set in a successful call to mcp251xfd_register_get_dev_id().
Though the status of calls made by mcp251xfd_register_get_dev_id() are
checked and handled, their status' are not returned. So return err.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2706,7 +2706,7 @@ mcp251xfd_register_get_dev_id(const stru
out_kfree_buf_rx:
kfree(buf_rx);
- return 0;
+ return err;
}
#define MCP251XFD_QUIRK_ACTIVE(quirk) \
From: Kai Ye <[email protected]>
[ Upstream commit 05b3bade290d6c940701f97f3233c07cfe27205d ]
The kernel test rebot report this warning: Uninitialized variable: ret.
The code flow may return value of ret directly. This value is an
uninitialized variable, here is fix it.
Signed-off-by: Kai Ye <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/hisilicon/qm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index ff1122153fbe..b616d2d8e773 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -4107,7 +4107,7 @@ static void qm_vf_get_qos(struct hisi_qm *qm, u32 fun_num)
static int qm_vf_read_qos(struct hisi_qm *qm)
{
int cnt = 0;
- int ret;
+ int ret = -EINVAL;
/* reset mailbox qos val */
qm->mb_qos = 0;
--
2.34.1
From: Dmitry Torokhov <[email protected]>
[ Upstream commit a5e5e03e94764148a01757b2fa4737d3445c13a6 ]
Internally kernel prepends all report buffers, for both numbered and
unnumbered reports, with report ID, therefore to properly handle unnumbered
reports we should prepend it ourselves.
For the same reason we should skip the first byte of the buffer when
calling i2c_hid_set_or_send_report() which then will take care of properly
formatting the transfer buffer based on its separate report ID argument
along with report payload.
[[email protected]: finalize trimmed sentence in changelog as spotted by Benjamin]
Fixes: 9b5a9ae88573 ("HID: i2c-hid: implement ll_driver transport-layer callbacks")
Signed-off-by: Dmitry Torokhov <[email protected]>
Tested-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/i2c-hid/i2c-hid-core.c | 32 ++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 4804d71e5293..65c1f20ec420 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -615,6 +615,17 @@ static int i2c_hid_get_raw_report(struct hid_device *hid,
if (report_type == HID_OUTPUT_REPORT)
return -EINVAL;
+ /*
+ * In case of unnumbered reports the response from the device will
+ * not have the report ID that the upper layers expect, so we need
+ * to stash it the buffer ourselves and adjust the data size.
+ */
+ if (!report_number) {
+ buf[0] = 0;
+ buf++;
+ count--;
+ }
+
/* +2 bytes to include the size of the reply in the query buffer */
ask_count = min(count + 2, (size_t)ihid->bufsize);
@@ -636,6 +647,9 @@ static int i2c_hid_get_raw_report(struct hid_device *hid,
count = min(count, ret_count - 2);
memcpy(buf, ihid->rawbuf + 2, count);
+ if (!report_number)
+ count++;
+
return count;
}
@@ -652,17 +666,19 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
mutex_lock(&ihid->reset_lock);
- if (report_id) {
- buf++;
- count--;
- }
-
+ /*
+ * Note that both numbered and unnumbered reports passed here
+ * are supposed to have report ID stored in the 1st byte of the
+ * buffer, so we strip it off unconditionally before passing payload
+ * to i2c_hid_set_or_send_report which takes care of encoding
+ * everything properly.
+ */
ret = i2c_hid_set_or_send_report(client,
report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
- report_id, buf, count, use_data);
+ report_id, buf + 1, count - 1, use_data);
- if (report_id && ret >= 0)
- ret++; /* add report_id to the number of transfered bytes */
+ if (ret >= 0)
+ ret++; /* add report_id to the number of transferred bytes */
mutex_unlock(&ihid->reset_lock);
--
2.34.1
From: Kuniyuki Iwashima <[email protected]>
commit d9a232d435dcc966738b0f414a86f7edf4f4c8c4 upstream.
The commit 314001f0bf92 ("af_unix: Add OOB support") introduced OOB for
AF_UNIX, but it lacks some changes for POLLPRI. Let's add the missing
piece.
In the selftest, normal datagrams are sent followed by OOB data, so this
commit replaces `POLLIN | POLLPRI` with just `POLLPRI` in the first test
case.
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/unix/af_unix.c | 4 ++++
tools/testing/selftests/net/af_unix/test_unix_oob.c | 6 +++---
2 files changed, 7 insertions(+), 3 deletions(-)
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -3049,6 +3049,10 @@ static __poll_t unix_poll(struct file *f
mask |= EPOLLIN | EPOLLRDNORM;
if (sk_is_readable(sk))
mask |= EPOLLIN | EPOLLRDNORM;
+#if IS_ENABLED(CONFIG_AF_UNIX_OOB)
+ if (READ_ONCE(unix_sk(sk)->oob_skb))
+ mask |= EPOLLPRI;
+#endif
/* Connection-based need to check for termination and startup */
if ((sk->sk_type == SOCK_STREAM || sk->sk_type == SOCK_SEQPACKET) &&
--- a/tools/testing/selftests/net/af_unix/test_unix_oob.c
+++ b/tools/testing/selftests/net/af_unix/test_unix_oob.c
@@ -218,10 +218,10 @@ main(int argc, char **argv)
/* Test 1:
* veriyf that SIGURG is
- * delivered and 63 bytes are
- * read and oob is '@'
+ * delivered, 63 bytes are
+ * read, oob is '@', and POLLPRI works.
*/
- wait_for_data(pfd, POLLIN | POLLPRI);
+ wait_for_data(pfd, POLLPRI);
read_oob(pfd, &oob);
len = read_data(pfd, buf, 1024);
if (!signal_recvd || len != 63 || oob != '@') {
From: Zhihao Cheng <[email protected]>
commit 40a8f0d5e7b3999f096570edab71c345da812e3e upstream.
'whiteout_ui->data' will be freed twice if space budget fail for
rename whiteout operation as following process:
rename_whiteout
dev = kmalloc
whiteout_ui->data = dev
kfree(whiteout_ui->data) // Free first time
iput(whiteout)
ubifs_free_inode
kfree(ui->data) // Double free!
KASAN reports:
==================================================================
BUG: KASAN: double-free or invalid-free in ubifs_free_inode+0x4f/0x70
Call Trace:
kfree+0x117/0x490
ubifs_free_inode+0x4f/0x70 [ubifs]
i_callback+0x30/0x60
rcu_do_batch+0x366/0xac0
__do_softirq+0x133/0x57f
Allocated by task 1506:
kmem_cache_alloc_trace+0x3c2/0x7a0
do_rename+0x9b7/0x1150 [ubifs]
ubifs_rename+0x106/0x1f0 [ubifs]
do_syscall_64+0x35/0x80
Freed by task 1506:
kfree+0x117/0x490
do_rename.cold+0x53/0x8a [ubifs]
ubifs_rename+0x106/0x1f0 [ubifs]
do_syscall_64+0x35/0x80
The buggy address belongs to the object at ffff88810238bed8 which
belongs to the cache kmalloc-8 of size 8
==================================================================
Let ubifs_free_inode() free 'whiteout_ui->data'. BTW, delete unused
assignment 'whiteout_ui->data_len = 0', process 'ubifs_evict_inode()
-> ubifs_jnl_delete_inode() -> ubifs_jnl_write_inode()' doesn't need it
(because 'inc_nlink(whiteout)' won't be excuted by 'goto out_release',
and the nlink of whiteout inode is 0).
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 2 --
1 file changed, 2 deletions(-)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -1425,8 +1425,6 @@ static int do_rename(struct inode *old_d
err = ubifs_budget_space(c, &wht_req);
if (err) {
- kfree(whiteout_ui->data);
- whiteout_ui->data_len = 0;
iput(whiteout);
goto out_release;
}
From: Libin Yang <[email protected]>
[ Upstream commit 3957db3ae3dae6f8b8168791f154567fe49e1fd7 ]
When clearing the sdw wakests status, we should use SDW_SHIM_WAKESTS.
Fixes: 4a17c441c7cb ("soundwire: intel: revisit SHIM programming sequences.")
Signed-off-by: Libin Yang <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soundwire/intel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 78037ffdb09b..f72d36654ac2 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -448,8 +448,8 @@ static void intel_shim_wake(struct sdw_intel *sdw, bool wake_enable)
/* Clear wake status */
wake_sts = intel_readw(shim, SDW_SHIM_WAKESTS);
- wake_sts |= (SDW_SHIM_WAKEEN_ENABLE << link_id);
- intel_writew(shim, SDW_SHIM_WAKESTS_STATUS, wake_sts);
+ wake_sts |= (SDW_SHIM_WAKESTS_STATUS << link_id);
+ intel_writew(shim, SDW_SHIM_WAKESTS, wake_sts);
}
mutex_unlock(sdw->link_res->shim_lock);
}
--
2.34.1
From: Jing Yao <[email protected]>
[ Upstream commit 81a998288956d09d7a7a2303d47e4d60ad55c401 ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Jing Yao <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/udlfb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index b9cdd02c1000..90f48b71fd8f 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1426,7 +1426,7 @@ static ssize_t metrics_bytes_rendered_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dlfb = fb_info->par;
- return snprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
atomic_read(&dlfb->bytes_rendered));
}
@@ -1434,7 +1434,7 @@ static ssize_t metrics_bytes_identical_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dlfb = fb_info->par;
- return snprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
atomic_read(&dlfb->bytes_identical));
}
@@ -1442,7 +1442,7 @@ static ssize_t metrics_bytes_sent_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dlfb = fb_info->par;
- return snprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
atomic_read(&dlfb->bytes_sent));
}
@@ -1450,7 +1450,7 @@ static ssize_t metrics_cpu_kcycles_used_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dlfb = fb_info->par;
- return snprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
atomic_read(&dlfb->cpu_kcycles_used));
}
--
2.34.1
From: Pavel Kubelun <[email protected]>
[ Upstream commit 3d7e7980993d2c1ae42d3d314040fc2de6a9c45f ]
It seems like sleep_clk was copied from ipq806x.
Fix ipq40xx sleep_clk to the value QSDK defines.
Link: https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?id=d92ec59973484acc86dd24b67f10f8911b4b4b7d
Link: https://patchwork.kernel.org/comment/22721613/
Fixes: bec6ba4cdf2a ("qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC")
Suggested-by: Bjorn Andersson <[email protected]> (clock-output-names)
Signed-off-by: Pavel Kubelun <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]> (removed clock rename)
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index ff1bdb10ad19..08bc5f46649d 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
clocks {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
- clock-frequency = <32768>;
+ clock-frequency = <32000>;
+ clock-output-names = "gcc_sleep_clk_src";
#clock-cells = <0>;
};
--
2.34.1
From: Hou Tao <[email protected]>
[ Upstream commit dda7596c109fc382876118627e29db7607cde35d ]
insn_to_jit_off passed to bpf_prog_fill_jited_linfo() is calculated in
instruction granularity instead of bytes granularity, but BPF line info
requires byte offset.
bpf_prog_fill_jited_linfo() will be the last user of ctx.offset before
it is freed, so convert the offset into byte-offset before calling into
bpf_prog_fill_jited_linfo() in order to fix the line info dump on arm64.
Fixes: 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
Suggested-by: Daniel Borkmann <[email protected]>
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/net/bpf_jit_comp.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index d13d9e5085a7..b56e7bd96594 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1126,6 +1126,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
prog->jited_len = prog_size;
if (!prog->is_func || extra_pass) {
+ int i;
+
+ /* offset[prog->len] is the size of program */
+ for (i = 0; i <= prog->len; i++)
+ ctx.offset[i] *= AARCH64_INSN_SIZE;
bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
out_off:
kfree(ctx.offset);
--
2.34.1
From: Randy Dunlap <[email protected]>
commit 460a79e18842caca6fa0c415de4a3ac1e671ac50 upstream.
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment).
The only reason that this particular __setup handler does not pollute
init's environment is that the setup string contains a '.', as in
"cgroup.memory". This causes init/main.c::unknown_boottoption() to
consider it to be an "Unused module parameter" and ignore it. (This is
for parsing of loadable module parameters any time after kernel init.)
Otherwise the string "cgroup.memory=whatever" would be added to init's
environment strings.
Instead of relying on this '.' quirk, just return 1 to indicate that the
boot option has been handled.
Note that there is no warning message if someone enters:
cgroup.memory=anything_invalid
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f7e1cb6ec51b0 ("mm: memcontrol: account socket memory in unified hierarchy memory controller")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Reviewed-by: Michal Koutný <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Roman Gushchin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memcontrol.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -7105,7 +7105,7 @@ static int __init cgroup_memory(char *s)
if (!strcmp(token, "nokmem"))
cgroup_memory_nokmem = true;
}
- return 0;
+ return 1;
}
__setup("cgroup.memory=", cgroup_memory);
On Tue, Apr 5, 2022, at 3:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
5.15.33-rc1 compiled and booted with no errors or regressions on my x86_64 test system.
Tested-by: Slade Watkins <[email protected]>
Cheers,
Slade
From: Jakob Koschel <[email protected]>
[ Upstream commit 9f1f4b642451d35667a4dc6a9c0a89d954b530a3 ]
'dev' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.
Instead of checking the pointer it should be checked if
the list is empty.
Fixes: 79dd0c69f05f ("V4L: 925: saa7134 alsa is now a standalone module")
Signed-off-by: Jakob Koschel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7134/saa7134-alsa.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/pci/saa7134/saa7134-alsa.c b/drivers/media/pci/saa7134/saa7134-alsa.c
index fb24d2ed3621..d3cde05a6eba 100644
--- a/drivers/media/pci/saa7134/saa7134-alsa.c
+++ b/drivers/media/pci/saa7134/saa7134-alsa.c
@@ -1214,7 +1214,7 @@ static int alsa_device_exit(struct saa7134_dev *dev)
static int saa7134_alsa_init(void)
{
- struct saa7134_dev *dev = NULL;
+ struct saa7134_dev *dev;
saa7134_dmasound_init = alsa_device_init;
saa7134_dmasound_exit = alsa_device_exit;
@@ -1229,7 +1229,7 @@ static int saa7134_alsa_init(void)
alsa_device_init(dev);
}
- if (dev == NULL)
+ if (list_empty(&saa7134_devlist))
pr_info("saa7134 ALSA: no saa7134 cards found\n");
return 0;
--
2.34.1
From: David Matlack <[email protected]>
commit 5f6de5cbebee925a612856fce6f9182bb3eee0db upstream.
Tie the lifetime the KVM module to the lifetime of each VM via
kvm.users_count. This way anything that grabs a reference to the VM via
kvm_get_kvm() cannot accidentally outlive the KVM module.
Prior to this commit, the lifetime of the KVM module was tied to the
lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU
file descriptors by their respective file_operations "owner" field.
This approach is insufficient because references grabbed via
kvm_get_kvm() do not prevent closing any of the aforementioned file
descriptors.
This fixes a long standing theoretical bug in KVM that at least affects
async page faults. kvm_setup_async_pf() grabs a reference via
kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing
prevents the VM file descriptor from being closed and the KVM module
from being unloaded before this callback runs.
Fixes: af585b921e5d ("KVM: Halt vcpu if page it tries to access is swapped out")
Fixes: 3d3aab1b973b ("KVM: set owner of cpu and vm file operations")
Cc: [email protected]
Suggested-by: Ben Gardon <[email protected]>
[ Based on a patch from Ben implemented for Google's kernel. ]
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
virt/kvm/kvm_main.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -117,6 +117,8 @@ EXPORT_SYMBOL_GPL(kvm_debugfs_dir);
static const struct file_operations stat_fops_per_vm;
+static struct file_operations kvm_chardev_ops;
+
static long kvm_vcpu_ioctl(struct file *file, unsigned int ioctl,
unsigned long arg);
#ifdef CONFIG_KVM_COMPAT
@@ -1099,6 +1101,16 @@ static struct kvm *kvm_create_vm(unsigne
preempt_notifier_inc();
kvm_init_pm_notifier(kvm);
+ /*
+ * When the fd passed to this ioctl() is opened it pins the module,
+ * but try_module_get() also prevents getting a reference if the module
+ * is in MODULE_STATE_GOING (e.g. if someone ran "rmmod --wait").
+ */
+ if (!try_module_get(kvm_chardev_ops.owner)) {
+ r = -ENODEV;
+ goto out_err;
+ }
+
return kvm;
out_err:
@@ -1188,6 +1200,7 @@ static void kvm_destroy_vm(struct kvm *k
preempt_notifier_dec();
hardware_disable_all();
mmdrop(mm);
+ module_put(kvm_chardev_ops.owner);
}
void kvm_get_kvm(struct kvm *kvm)
From: Ville Syrjälä <[email protected]>
commit 1937f3feb0e84089ae4065e09c871b8ab4676f01 upstream.
For modern platforms the spec explicitly states that a
SAGV block time of zero means that SAGV is not supported.
Let's extend that to all platforms. Supposedly there should
be no systems where this isn't true, and it'll allow us to:
- use the same code regardless of older vs. newer platform
- wm latencies already treat 0 as disabled, so this fits well
with other related code
- make it a bit more clear when SAGV is used vs. not
- avoid overflows from adding U32_MAX with a u16 wm0 latency value
which could cause us to miscalculate the SAGV watermarks on tgl+
Cc: [email protected]
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Stanislav Lisovskiy <[email protected]>
(cherry picked from commit d8f5855b31c0523ea3b171db8dfb998830e8735d)
Signed-off-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_pm.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3713,8 +3713,7 @@ skl_setup_sagv_block_time(struct drm_i91
MISSING_CASE(DISPLAY_VER(dev_priv));
}
- /* Default to an unusable block time */
- dev_priv->sagv_block_time_us = -1;
+ dev_priv->sagv_block_time_us = 0;
}
/*
@@ -5635,7 +5634,7 @@ static void skl_compute_plane_wm(const s
result->min_ddb_alloc = max(min_ddb_alloc, blocks) + 1;
result->enable = true;
- if (DISPLAY_VER(dev_priv) < 12)
+ if (DISPLAY_VER(dev_priv) < 12 && dev_priv->sagv_block_time_us)
result->can_sagv = latency >= dev_priv->sagv_block_time_us;
}
@@ -5666,7 +5665,10 @@ static void tgl_compute_sagv_wm(const st
struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
struct skl_wm_level *sagv_wm = &plane_wm->sagv.wm0;
struct skl_wm_level *levels = plane_wm->wm;
- unsigned int latency = dev_priv->wm.skl_latency[0] + dev_priv->sagv_block_time_us;
+ unsigned int latency = 0;
+
+ if (dev_priv->sagv_block_time_us)
+ latency = dev_priv->sagv_block_time_us + dev_priv->wm.skl_latency[0];
skl_compute_plane_wm(crtc_state, 0, latency,
wm_params, &levels[0],
From: Tong Zhang <[email protected]>
[ Upstream commit a7e8de822e0b1979f08767c751f6c8a9c1d4ad86 ]
A bug can be triggered by following command
$ modprobe nd_pmem && modprobe -r nd_pmem
[ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[ 10.062433] Call Trace:
[ 10.062673] dump_stack_lvl+0x34/0x44
[ 10.062865] slab_err+0x90/0xd0
[ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0
[ 10.063848] kmem_cache_destroy+0x4a/0x110
[ 10.064058] __x64_sys_delete_module+0x265/0x300
This is caused by dax_fs_exit() not flushing inodes before destroy cache.
To fix this issue, call rcu_barrier() before destroy cache.
Signed-off-by: Tong Zhang <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances")
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dax/super.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dax/super.c b/drivers/dax/super.c
index fc89e91beea7..7610e4a9ac4e 100644
--- a/drivers/dax/super.c
+++ b/drivers/dax/super.c
@@ -678,6 +678,7 @@ static int dax_fs_init(void)
static void dax_fs_exit(void)
{
kern_unmount(dax_mnt);
+ rcu_barrier();
kmem_cache_destroy(dax_cache);
}
--
2.34.1
From: Quinn Tran <[email protected]>
commit c02aada06d19a215c8291bd968a99a270e96f734 upstream.
User experienced device lost. The log shows Get port data base command was
queued up, failed, and requeued again. Every time it is requeued, it set
the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring
because driver thinks a recovery is in progress for this session. In
essence, this session is hung. The reason it gets into this place is the
session deletion got in front of this call due to link perturbation.
Break the requeue cycle and exit. The session deletion code will trigger a
session relogin.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_def.h | 4 ++++
drivers/scsi/qla2xxx/qla_init.c | 19 +++++++++++++++++--
2 files changed, 21 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -5438,4 +5438,8 @@ struct ql_vnd_tgt_stats_resp {
#include "qla_gbl.h"
#include "qla_dbg.h"
#include "qla_inline.h"
+
+#define IS_SESSION_DELETED(_fcport) (_fcport->disc_state == DSC_DELETE_PEND || \
+ _fcport->disc_state == DSC_DELETED)
+
#endif
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -576,6 +576,14 @@ qla2x00_async_adisc(struct scsi_qla_host
struct srb_iocb *lio;
int rval = QLA_FUNCTION_FAILED;
+ if (IS_SESSION_DELETED(fcport)) {
+ ql_log(ql_log_warn, vha, 0xffff,
+ "%s: %8phC is being delete - not sending command.\n",
+ __func__, fcport->port_name);
+ fcport->flags &= ~FCF_ASYNC_ACTIVE;
+ return rval;
+ }
+
if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT))
return rval;
@@ -1339,8 +1347,15 @@ int qla24xx_async_gpdb(struct scsi_qla_h
struct port_database_24xx *pd;
struct qla_hw_data *ha = vha->hw;
- if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT) ||
- fcport->loop_id == FC_NO_LOOP_ID) {
+ if (IS_SESSION_DELETED(fcport)) {
+ ql_log(ql_log_warn, vha, 0xffff,
+ "%s: %8phC is being delete - not sending command.\n",
+ __func__, fcport->port_name);
+ fcport->flags &= ~FCF_ASYNC_ACTIVE;
+ return rval;
+ }
+
+ if (!vha->flags.online || fcport->flags & FCF_ASYNC_SENT) {
ql_log(ql_log_warn, vha, 0xffff,
"%s: %8phC online %d flags %x - not sending command.\n",
__func__, fcport->port_name, vha->flags.online, fcport->flags);
From: Dave Jiang <[email protected]>
[ Upstream commit ea7c8f598c323f6ebaf9ddae01fb2a981fe8c56a ]
When clearing the group configurations, the driver fails to restore the
default setting for DSA 1.x based devices. Add defaults in
idxd_groups_clear_state() for traffic class configuration.
Fixes: ade8a86b512c ("dmaengine: idxd: Set defaults for GRPCFG traffic class")
Reported-by: Binuraj Ravindran <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/164304123369.824298.6952463420266592087.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/idxd/device.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index ac671b6c0c36..7bd9ac1e93b2 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -703,8 +703,13 @@ static void idxd_groups_clear_state(struct idxd_device *idxd)
group->use_rdbuf_limit = false;
group->rdbufs_allowed = 0;
group->rdbufs_reserved = 0;
- group->tc_a = -1;
- group->tc_b = -1;
+ if (idxd->hw.version < DEVICE_VERSION_2 && !tc_override) {
+ group->tc_a = 1;
+ group->tc_b = 1;
+ } else {
+ group->tc_a = -1;
+ group->tc_b = -1;
+ }
}
}
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit fd6d0e376211d7ed759db96b0fbd9a1cee67d462 ]
Make sure that the __le32 fields of struct sata_cmd are manipulated after
applying the correct endian conversion. That is, use cpu_to_le32() for
assigning values and le32_to_cpu() for consulting a field value. In
particular, make sure that the calculations for the 4G boundary check are
done using CPU endianness and *not* little endian values. With these fixes,
many sparse warnings are removed.
While at it, fix some code identation and add blank lines after variable
declarations and in some other places to make this code more readable.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 82 ++++++++++++++++++--------------
1 file changed, 45 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index d7a27627fce0..c6e4812e6591 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4540,7 +4540,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
u32 q_index, cpu_id;
struct sata_start_req sata_cmd;
u32 hdr_tag, ncg_tag = 0;
- u64 phys_addr, start_addr, end_addr;
+ u64 phys_addr, end_addr;
u32 end_addr_high, end_addr_low;
u32 ATAP = 0x0;
u32 dir;
@@ -4601,32 +4601,38 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
pm8001_chip_make_sg(task->scatter,
ccb->n_elem, ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
- sata_cmd.enc_addr_low = lower_32_bits(phys_addr);
- sata_cmd.enc_addr_high = upper_32_bits(phys_addr);
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
- sata_cmd.enc_addr_low = lower_32_bits(dma_addr);
- sata_cmd.enc_addr_high = upper_32_bits(dma_addr);
+
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(dma_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
sata_cmd.enc_esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + sata_cmd.enc_len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
- if (end_addr_high != sata_cmd.enc_addr_high) {
+ end_addr = dma_addr + le32_to_cpu(sata_cmd.enc_len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+ if (end_addr_high != le32_to_cpu(sata_cmd.enc_addr_high)) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, sata_cmd.enc_len,
+ dma_addr,
+ le32_to_cpu(sata_cmd.enc_len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
sata_cmd.enc_addr_low =
- lower_32_bits(phys_addr);
+ cpu_to_le32(lower_32_bits(phys_addr));
sata_cmd.enc_addr_high =
- upper_32_bits(phys_addr);
+ cpu_to_le32(upper_32_bits(phys_addr));
sata_cmd.enc_esgl =
cpu_to_le32(1 << 31);
}
@@ -4637,7 +4643,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
sata_cmd.enc_esgl = 0;
}
/* XTS mode. All other fields are 0 */
- sata_cmd.key_index_mode = 0x6 << 4;
+ sata_cmd.key_index_mode = cpu_to_le32(0x6 << 4);
+
/* set tweak values. Should be the start lba */
sata_cmd.twk_val0 =
cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) |
@@ -4663,31 +4670,31 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
phys_addr = ccb->ccb_dma_handle;
sata_cmd.addr_low = lower_32_bits(phys_addr);
sata_cmd.addr_high = upper_32_bits(phys_addr);
- sata_cmd.esgl = cpu_to_le32(1 << 31);
+ sata_cmd.esgl = cpu_to_le32(1U << 31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
+
sata_cmd.addr_low = lower_32_bits(dma_addr);
sata_cmd.addr_high = upper_32_bits(dma_addr);
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
sata_cmd.esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + sata_cmd.len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+ end_addr = dma_addr + le32_to_cpu(sata_cmd.len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
if (end_addr_high != sata_cmd.addr_high) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%xend_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, sata_cmd.len,
+ dma_addr,
+ le32_to_cpu(sata_cmd.len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
- sata_cmd.addr_low =
- lower_32_bits(phys_addr);
- sata_cmd.addr_high =
- upper_32_bits(phys_addr);
- sata_cmd.esgl = cpu_to_le32(1 << 31);
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1U << 31);
}
} else if (task->num_scatter == 0) {
sata_cmd.addr_low = 0;
@@ -4695,27 +4702,28 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
sata_cmd.esgl = 0;
}
+
/* scsi cdb */
sata_cmd.atapi_scsi_cdb[0] =
cpu_to_le32(((task->ata_task.atapi_packet[0]) |
- (task->ata_task.atapi_packet[1] << 8) |
- (task->ata_task.atapi_packet[2] << 16) |
- (task->ata_task.atapi_packet[3] << 24)));
+ (task->ata_task.atapi_packet[1] << 8) |
+ (task->ata_task.atapi_packet[2] << 16) |
+ (task->ata_task.atapi_packet[3] << 24)));
sata_cmd.atapi_scsi_cdb[1] =
cpu_to_le32(((task->ata_task.atapi_packet[4]) |
- (task->ata_task.atapi_packet[5] << 8) |
- (task->ata_task.atapi_packet[6] << 16) |
- (task->ata_task.atapi_packet[7] << 24)));
+ (task->ata_task.atapi_packet[5] << 8) |
+ (task->ata_task.atapi_packet[6] << 16) |
+ (task->ata_task.atapi_packet[7] << 24)));
sata_cmd.atapi_scsi_cdb[2] =
cpu_to_le32(((task->ata_task.atapi_packet[8]) |
- (task->ata_task.atapi_packet[9] << 8) |
- (task->ata_task.atapi_packet[10] << 16) |
- (task->ata_task.atapi_packet[11] << 24)));
+ (task->ata_task.atapi_packet[9] << 8) |
+ (task->ata_task.atapi_packet[10] << 16) |
+ (task->ata_task.atapi_packet[11] << 24)));
sata_cmd.atapi_scsi_cdb[3] =
cpu_to_le32(((task->ata_task.atapi_packet[12]) |
- (task->ata_task.atapi_packet[13] << 8) |
- (task->ata_task.atapi_packet[14] << 16) |
- (task->ata_task.atapi_packet[15] << 24)));
+ (task->ata_task.atapi_packet[13] << 8) |
+ (task->ata_task.atapi_packet[14] << 16) |
+ (task->ata_task.atapi_packet[15] << 24)));
}
/* Check for read log for failed drive and return */
--
2.34.1
From: Jian Shen <[email protected]>
[ Upstream commit ccb18f05535c96d26e2d559d402acb87700fc5a7 ]
If the MAC address A is configured to vport A and then vport B. The MAC
address of vport A in the hardware becomes invalid. If the address of
vport A is changed to MAC address B, the driver needs to delete the MAC
address A of vport A. Due to the MAC address A of vport A has become
invalid in the hardware entry, so "-ENOENT" is returned. In this case, the
"used_umv_size" value recorded in driver is not updated. As a result, the
MAC entry status of the software is inconsistent with that of the hardware.
Therefore, the driver updates the umv size even if the MAC entry cannot be
found. Ensure that the software and hardware status is consistent.
Fixes: ee4bcd3b7ae4 ("net: hns3: refactor the MAC address configure")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 66c407d0d507..b78de80d6c05 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -8714,12 +8714,11 @@ int hclge_rm_uc_addr_common(struct hclge_vport *vport,
hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
hclge_prepare_mac_addr(&req, addr, false);
ret = hclge_remove_mac_vlan_tbl(vport, &req);
- if (!ret) {
+ if (!ret || ret == -ENOENT) {
mutex_lock(&hdev->vport_lock);
hclge_update_umv_space(vport, true);
mutex_unlock(&hdev->vport_lock);
- } else if (ret == -ENOENT) {
- ret = 0;
+ return 0;
}
return ret;
--
2.34.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 23fc539e81295b14b50c6ccc5baeb4f3d59d822d ]
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Dinh Nguyen <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/kernel/process.c | 2 +-
arch/arm/kernel/swp_emulate.c | 2 +-
arch/arm/kernel/traps.c | 2 +-
arch/csky/kernel/perf_callchain.c | 2 +-
arch/csky/kernel/signal.c | 2 +-
arch/nios2/kernel/signal.c | 20 +++++++++++---------
arch/powerpc/lib/sstep.c | 4 ++--
arch/riscv/kernel/perf_callchain.c | 4 ++--
arch/sparc/kernel/signal_32.c | 2 +-
lib/test_lockup.c | 4 ++--
10 files changed, 23 insertions(+), 21 deletions(-)
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 8e90052f6f05..5f7f5aab361f 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
return task_thread_info(current)->thr_ptr;
}
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
{
struct pt_regs *regs = current_pt_regs();
u32 uval;
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 6166ba38bf99..b74bfcf94fb1 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -195,7 +195,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
/* Check access in reasonable access range for both SWP and SWPB */
- if (!access_ok((address & ~3), 4)) {
+ if (!access_ok((void __user *)(address & ~3), 4)) {
pr_debug("SWP{B} emulation: access to %p not allowed!\n",
(void *)address);
res = -EFAULT;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 655c4fe0b4d0..54abd8720dde 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -575,7 +575,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
if (end < start || flags)
return -EINVAL;
- if (!access_ok(start, end - start))
+ if (!access_ok((void __user *)start, end - start))
return -EFAULT;
return __do_cache_op(start, end);
diff --git a/arch/csky/kernel/perf_callchain.c b/arch/csky/kernel/perf_callchain.c
index 35318a635a5f..75e1f9df5f60 100644
--- a/arch/csky/kernel/perf_callchain.c
+++ b/arch/csky/kernel/perf_callchain.c
@@ -49,7 +49,7 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
{
struct stackframe buftail;
unsigned long lr = 0;
- unsigned long *user_frame_tail = (unsigned long *)fp;
+ unsigned long __user *user_frame_tail = (unsigned long __user *)fp;
/* Check accessibility of one struct frame_tail beyond */
if (!access_ok(user_frame_tail, sizeof(buftail)))
diff --git a/arch/csky/kernel/signal.c b/arch/csky/kernel/signal.c
index c7b763d2f526..8867ddf3e6c7 100644
--- a/arch/csky/kernel/signal.c
+++ b/arch/csky/kernel/signal.c
@@ -136,7 +136,7 @@ static inline void __user *get_sigframe(struct ksignal *ksig,
static int
setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
int err = 0;
frame = get_sigframe(ksig, regs, sizeof(*frame));
diff --git a/arch/nios2/kernel/signal.c b/arch/nios2/kernel/signal.c
index 2009ae2d3c3b..386e46443b60 100644
--- a/arch/nios2/kernel/signal.c
+++ b/arch/nios2/kernel/signal.c
@@ -36,10 +36,10 @@ struct rt_sigframe {
static inline int rt_restore_ucontext(struct pt_regs *regs,
struct switch_stack *sw,
- struct ucontext *uc, int *pr2)
+ struct ucontext __user *uc, int *pr2)
{
int temp;
- unsigned long *gregs = uc->uc_mcontext.gregs;
+ unsigned long __user *gregs = uc->uc_mcontext.gregs;
int err;
/* Always make any pending restarted system calls return -EINTR */
@@ -102,10 +102,11 @@ asmlinkage int do_rt_sigreturn(struct switch_stack *sw)
{
struct pt_regs *regs = (struct pt_regs *)(sw + 1);
/* Verify, can we follow the stack back */
- struct rt_sigframe *frame = (struct rt_sigframe *) regs->sp;
+ struct rt_sigframe __user *frame;
sigset_t set;
int rval;
+ frame = (struct rt_sigframe __user *) regs->sp;
if (!access_ok(frame, sizeof(*frame)))
goto badframe;
@@ -124,10 +125,10 @@ asmlinkage int do_rt_sigreturn(struct switch_stack *sw)
return 0;
}
-static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
+static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs)
{
struct switch_stack *sw = (struct switch_stack *)regs - 1;
- unsigned long *gregs = uc->uc_mcontext.gregs;
+ unsigned long __user *gregs = uc->uc_mcontext.gregs;
int err = 0;
err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
@@ -162,8 +163,9 @@ static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
return err;
}
-static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
- size_t frame_size)
+static inline void __user *get_sigframe(struct ksignal *ksig,
+ struct pt_regs *regs,
+ size_t frame_size)
{
unsigned long usp;
@@ -174,13 +176,13 @@ static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
usp = sigsp(usp, ksig);
/* Verify, is it 32 or 64 bit aligned */
- return (void *)((usp - frame_size) & -8UL);
+ return (void __user *)((usp - frame_size) & -8UL);
}
static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
int err = 0;
frame = get_sigframe(ksig, regs, sizeof(*frame));
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index d8cc49f39fe4..1a16ad18f9f2 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -112,9 +112,9 @@ static nokprobe_inline long address_ok(struct pt_regs *regs,
{
if (!user_mode(regs))
return 1;
- if (__access_ok(ea, nb))
+ if (access_ok((void __user *)ea, nb))
return 1;
- if (__access_ok(ea, 1))
+ if (access_ok((void __user *)ea, 1))
/* Access overlaps the end of the user region */
regs->dar = TASK_SIZE_MAX - 1;
else
diff --git a/arch/riscv/kernel/perf_callchain.c b/arch/riscv/kernel/perf_callchain.c
index d82c291c1e4c..357f985041cb 100644
--- a/arch/riscv/kernel/perf_callchain.c
+++ b/arch/riscv/kernel/perf_callchain.c
@@ -15,8 +15,8 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
{
struct stackframe buftail;
unsigned long ra = 0;
- unsigned long *user_frame_tail =
- (unsigned long *)(fp - sizeof(struct stackframe));
+ unsigned long __user *user_frame_tail =
+ (unsigned long __user *)(fp - sizeof(struct stackframe));
/* Check accessibility of one struct frame_tail beyond */
if (!access_ok(user_frame_tail, sizeof(buftail)))
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index ffab16369bea..74f80443b195 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -65,7 +65,7 @@ struct rt_signal_frame {
*/
static inline bool invalid_frame_pointer(void __user *fp, int fplen)
{
- if ((((unsigned long) fp) & 15) || !__access_ok((unsigned long)fp, fplen))
+ if ((((unsigned long) fp) & 15) || !access_ok(fp, fplen))
return true;
return false;
diff --git a/lib/test_lockup.c b/lib/test_lockup.c
index 906b598740a7..6a0f329a794a 100644
--- a/lib/test_lockup.c
+++ b/lib/test_lockup.c
@@ -417,8 +417,8 @@ static bool test_kernel_ptr(unsigned long addr, int size)
return false;
/* should be at least readable kernel address */
- if (access_ok(ptr, 1) ||
- access_ok(ptr + size - 1, 1) ||
+ if (access_ok((void __user *)ptr, 1) ||
+ access_ok((void __user *)ptr + size - 1, 1) ||
get_kernel_nofault(buf, ptr) ||
get_kernel_nofault(buf, ptr + size - 1)) {
pr_err("invalid kernel ptr: %#lx\n", addr);
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit 716b4573026bcbfa7b58ed19fe15554bac66b082 upstream.
whiteout inode should be put when do_tmpfile() failed if inode has been
initialized. Otherwise we will get following warning during umount:
UBIFS error (ubi0:0 pid 1494): ubifs_assert_failed [ubifs]: UBIFS
assert failed: c->bi.dd_growth == 0, in fs/ubifs/super.c:1930
VFS: Busy inodes after unmount of ubifs. Self-destruct in 5 seconds.
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <[email protected]>
Suggested-by: Sascha Hauer <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -432,6 +432,8 @@ out_inode:
make_bad_inode(inode);
if (!instantiated)
iput(inode);
+ else if (whiteout)
+ iput(*whiteout);
out_budg:
ubifs_release_budget(c, &req);
if (!instantiated)
From: Ilpo Järvinen <[email protected]>
[ Upstream commit f58c252e30cf74f68b0054293adc03b5923b9f0e ]
When 8250 UART is using DMA, x_char (XON/XOFF) is never sent
to the wire. After this change, x_char is injected correctly.
Create uart_xchar_out() helper for sending the x_char out and
accounting related to it. It seems that almost every driver
does these same steps with x_char. Except for 8250, however,
almost all currently lack .serial_out so they cannot immediately
take advantage of this new helper.
The downside of this patch is that it might reintroduce
the problems some devices faced with mixed DMA/non-DMA transfer
which caused revert f967fc8f165f (Revert "serial: 8250_dma:
don't bother DMA with small transfers"). However, the impact
should be limited to cases with XON/XOFF (that didn't work
with DMA capable devices to begin with so this problem is not
very likely to cause a major issue, if any at all).
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Reported-by: Gilles Buloz <[email protected]>
Tested-by: Gilles Buloz <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_dma.c | 11 ++++++++++-
drivers/tty/serial/8250/8250_port.c | 4 +---
drivers/tty/serial/serial_core.c | 14 ++++++++++++++
include/linux/serial_core.h | 2 ++
4 files changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 890fa7ddaa7f..b3c3f7e5851a 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -64,10 +64,19 @@ int serial8250_tx_dma(struct uart_8250_port *p)
struct uart_8250_dma *dma = p->dma;
struct circ_buf *xmit = &p->port.state->xmit;
struct dma_async_tx_descriptor *desc;
+ struct uart_port *up = &p->port;
int ret;
- if (dma->tx_running)
+ if (dma->tx_running) {
+ if (up->x_char) {
+ dmaengine_pause(dma->txchan);
+ uart_xchar_out(up, UART_TX);
+ dmaengine_resume(dma->txchan);
+ }
return 0;
+ } else if (up->x_char) {
+ uart_xchar_out(up, UART_TX);
+ }
if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) {
/* We have been called from __dma_tx_complete() */
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 868ccb3e16cf..723ec0806799 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1819,9 +1819,7 @@ void serial8250_tx_chars(struct uart_8250_port *up)
int count;
if (port->x_char) {
- serial_out(up, UART_TX, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
+ uart_xchar_out(port, UART_TX);
return;
}
if (uart_tx_stopped(port)) {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index dc6129ddef85..eb15423f935a 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -652,6 +652,20 @@ static void uart_flush_buffer(struct tty_struct *tty)
tty_port_tty_wakeup(&state->port);
}
+/*
+ * This function performs low-level write of high-priority XON/XOFF
+ * character and accounting for it.
+ *
+ * Requires uart_port to implement .serial_out().
+ */
+void uart_xchar_out(struct uart_port *uport, int offset)
+{
+ serial_port_out(uport, offset, uport->x_char);
+ uport->icount.tx++;
+ uport->x_char = 0;
+}
+EXPORT_SYMBOL_GPL(uart_xchar_out);
+
/*
* This function is used to send a high-priority XON/XOFF character to
* the device
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c58cc142d23f..8c32935e1059 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -458,6 +458,8 @@ extern void uart_handle_cts_change(struct uart_port *uport,
extern void uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag);
+void uart_xchar_out(struct uart_port *uport, int offset);
+
#ifdef CONFIG_MAGIC_SYSRQ_SERIAL
#define SYSRQ_TIMEOUT (HZ * 5)
--
2.34.1
From: Leilk Liu <[email protected]>
commit 03b1be379dcee2e9c866c2a455a1a4a9581b3efd upstream.
this patch support tick_delay bit[31:30] without enhance_timing feature.
Fixes: f84d866ab43f("spi: mediatek: add tick_delay support")
Signed-off-by: Leilk Liu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-mt65xx.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -43,8 +43,11 @@
#define SPI_CFG1_PACKET_LOOP_OFFSET 8
#define SPI_CFG1_PACKET_LENGTH_OFFSET 16
#define SPI_CFG1_GET_TICK_DLY_OFFSET 29
+#define SPI_CFG1_GET_TICK_DLY_OFFSET_V1 30
#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000
+#define SPI_CFG1_GET_TICK_DLY_MASK_V1 0xc0000000
+
#define SPI_CFG1_CS_IDLE_MASK 0xff
#define SPI_CFG1_PACKET_LOOP_MASK 0xff00
#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000
@@ -346,9 +349,15 @@ static int mtk_spi_prepare_message(struc
/* tick delay */
reg_val = readl(mdata->base + SPI_CFG1_REG);
- reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK;
- reg_val |= ((chip_config->tick_delay & 0x7)
- << SPI_CFG1_GET_TICK_DLY_OFFSET);
+ if (mdata->dev_comp->enhance_timing) {
+ reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK;
+ reg_val |= ((chip_config->tick_delay & 0x7)
+ << SPI_CFG1_GET_TICK_DLY_OFFSET);
+ } else {
+ reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK_V1;
+ reg_val |= ((chip_config->tick_delay & 0x3)
+ << SPI_CFG1_GET_TICK_DLY_OFFSET_V1);
+ }
writel(reg_val, mdata->base + SPI_CFG1_REG);
/* set hw cs timing */
From: David Gow <[email protected]>
[ Upstream commit 37fd83916da2e4cae03d350015c82a67b1b334c4 ]
The Google Coreboot implementation requires IOMEM functions
(memmremap, memunmap, devm_memremap), but does not specify this is its
Kconfig. This results in build errors when HAS_IOMEM is not set, such as
on some UML configurations:
/usr/bin/ld: drivers/firmware/google/coreboot_table.o: in function `coreboot_table_probe':
coreboot_table.c:(.text+0x311): undefined reference to `memremap'
/usr/bin/ld: coreboot_table.c:(.text+0x34e): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/memconsole-coreboot.o: in function `memconsole_probe':
memconsole-coreboot.c:(.text+0x12d): undefined reference to `memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x17e): undefined reference to `devm_memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x191): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_destroy.isra.0':
vpd.c:(.text+0x300): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_init':
vpd.c:(.text+0x382): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x459): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_probe':
vpd.c:(.text+0x59d): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x5d3): undefined reference to `memunmap'
collect2: error: ld returned 1 exit status
Fixes: a28aad66da8b ("firmware: coreboot: Collapse platform drivers into bus core")
Acked-By: anton ivanov <[email protected]>
Acked-By: Julius Werner <[email protected]>
Signed-off-by: David Gow <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/google/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
index 931544c9f63d..983e07dc022e 100644
--- a/drivers/firmware/google/Kconfig
+++ b/drivers/firmware/google/Kconfig
@@ -21,7 +21,7 @@ config GOOGLE_SMI
config GOOGLE_COREBOOT_TABLE
tristate "Coreboot Table Access"
- depends on ACPI || OF
+ depends on HAS_IOMEM && (ACPI || OF)
help
This option enables the coreboot_table module, which provides other
firmware modules access to the coreboot table. The coreboot table
--
2.34.1
From: Paul Menzel <[email protected]>
[ Upstream commit 633174a7046ec3b4572bec24ef98e6ee89bce14b ]
Buidling raid6test on Ubuntu 21.10 (ppc64le) with GNU Make 4.3 shows the
errors below:
$ cd lib/raid6/test/
$ make
<stdin>:1:1: error: stray ‘\’ in program
<stdin>:1:2: error: stray ‘#’ in program
<stdin>:1:11: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ \
before ‘<’ token
[...]
The errors come from the HAS_ALTIVEC test, which fails, and the POWER
optimized versions are not built. That’s also reason nobody noticed on the
other architectures.
GNU Make 4.3 does not remove the backslash anymore. From the 4.3 release
announcment:
> * WARNING: Backward-incompatibility!
> Number signs (#) appearing inside a macro reference or function invocation
> no longer introduce comments and should not be escaped with backslashes:
> thus a call such as:
> foo := $(shell echo '#')
> is legal. Previously the number sign needed to be escaped, for example:
> foo := $(shell echo '\#')
> Now this latter will resolve to "\#". If you want to write makefiles
> portable to both versions, assign the number sign to a variable:
> H := \#
> foo := $(shell echo '$H')
> This was claimed to be fixed in 3.81, but wasn't, for some reason.
> To detect this change search for 'nocomment' in the .FEATURES variable.
So, do the same as commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd
files for future Make") and commit 929bef467771 ("bpf: Use $(pound) instead
of \# in Makefiles") and define and use a $(pound) variable.
Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Cc: Matt Brown <[email protected]>
Signed-off-by: Paul Menzel <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/raid6/test/Makefile | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index a4c7cd74cff5..4fb7700a741b 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -4,6 +4,8 @@
# from userspace.
#
+pound := \#
+
CC = gcc
OPTFLAGS = -O2 # Adjust as desired
CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS)
@@ -42,7 +44,7 @@ else ifeq ($(HAS_NEON),yes)
OBJS += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1
else
- HAS_ALTIVEC := $(shell printf '\#include <altivec.h>\nvector int a;\n' |\
+ HAS_ALTIVEC := $(shell printf '$(pound)include <altivec.h>\nvector int a;\n' |\
gcc -c -x c - >/dev/null && rm ./-.o && echo yes)
ifeq ($(HAS_ALTIVEC),yes)
CFLAGS += -I../../../arch/powerpc/include
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 3e8c6bc608480010f360c4a59578d7841726137d ]
When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.
Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 85db2e4377f0..5bdf8b7acd23 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -96,20 +96,16 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
if (err)
goto out;
+ if (ret == MTK_PUPD_SET_R1R0_00)
+ ret = MTK_DISABLE;
if (param == PIN_CONFIG_BIAS_DISABLE) {
- if (ret == MTK_PUPD_SET_R1R0_00)
- ret = MTK_DISABLE;
+ if (ret != MTK_DISABLE)
+ err = -EINVAL;
} else if (param == PIN_CONFIG_BIAS_PULL_UP) {
- /* When desire to get pull-up value, return
- * error if current setting is pull-down
- */
- if (!pullup)
+ if (!pullup || ret == MTK_DISABLE)
err = -EINVAL;
} else if (param == PIN_CONFIG_BIAS_PULL_DOWN) {
- /* When desire to get pull-down value, return
- * error if current setting is pull-up
- */
- if (pullup)
+ if (pullup || ret == MTK_DISABLE)
err = -EINVAL;
}
} else {
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 5f7e2af00807f2117650e711a58b7f0e986ce1df ]
When registering a clock that doesn't have a recalc_rate implementation,
and doesn't have its parent registered yet, we initialize the clk_core
rate and 'req_rate' fields to 0.
The rate field is later updated when the parent is registered in
clk_core_reparent_orphans_nolock() using __clk_recalc_rates(), but the
'req_rate' field is never updated.
This leads to an issue in clk_set_rate_range() and clk_put(), since
those functions will call clk_set_rate() with the content of 'req_rate'
to provide drivers with the opportunity to change the rate based on the
new boundaries. In this case, we would call clk_set_rate() with a rate
of 0, effectively enforcing the minimum allowed for this clock whenever
we would call one of those two functions, even though the actual rate
might be within range.
Let's fix this by setting 'req_rate' in
clk_core_reparent_orphans_nolock() with the rate field content just
updated by the call to __clk_recalc_rates().
Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks")
Reported-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # T30 Nexus7
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: Reword comment]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 32fd2853e8b2..5cef73a85901 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3410,6 +3410,19 @@ static void clk_core_reparent_orphans_nolock(void)
__clk_set_parent_after(orphan, parent, NULL);
__clk_recalc_accuracies(orphan);
__clk_recalc_rates(orphan, 0);
+
+ /*
+ * __clk_init_parent() will set the initial req_rate to
+ * 0 if the clock doesn't have clk_ops::recalc_rate and
+ * is an orphan when it's registered.
+ *
+ * 'req_rate' is used by clk_set_rate_range() and
+ * clk_put() to trigger a clk_set_rate() call whenever
+ * the boundaries are modified. Let's make sure
+ * 'req_rate' is set to something non-zero so that
+ * clk_set_rate_range() doesn't drop the frequency.
+ */
+ orphan->req_rate = orphan->rate;
}
}
}
--
2.34.1
From: Geliang Tang <[email protected]>
[ Upstream commit 24720d7452df2dff2e539d9dff28904e25bb1c6d ]
This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.
In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.
The output looks like this:
ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ]
server got 1 data checksum error[s]
Fixes: 94d66ba1d8e48 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../selftests/net/mptcp/mptcp_connect.sh | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index 559173a8e387..d75fa97609c1 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -445,6 +445,8 @@ do_transfer()
local stat_ackrx_last_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
local stat_cookietx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesSent")
local stat_cookierx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesRecv")
+ local stat_csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr")
+ local stat_csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr")
timeout ${timeout_test} \
ip netns exec ${listener_ns} \
@@ -537,6 +539,23 @@ do_transfer()
fi
fi
+ if $checksum; then
+ local csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr")
+ local csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr")
+
+ local csum_err_s_nr=$((csum_err_s - stat_csum_err_s))
+ if [ $csum_err_s_nr -gt 0 ]; then
+ printf "[ FAIL ]\nserver got $csum_err_s_nr data checksum error[s]"
+ rets=1
+ fi
+
+ local csum_err_c_nr=$((csum_err_c - stat_csum_err_c))
+ if [ $csum_err_c_nr -gt 0 ]; then
+ printf "[ FAIL ]\nclient got $csum_err_c_nr data checksum error[s]"
+ retc=1
+ fi
+ fi
+
if [ $retc -eq 0 ] && [ $rets -eq 0 ]; then
printf "[ OK ]"
fi
--
2.34.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit a97b693c3712f040c5802f32b2d685352e08cefa ]
These two architectures implement 8-byte get_user() through
a memcpy() into a four-byte variable, which won't fit.
Use a temporary 64-bit variable instead here, and use a double
cast the way that risc-v and openrisc do to avoid compile-time
warnings.
Fixes: 6a090e97972d ("arch/microblaze: support get_user() of size 8 bytes")
Fixes: 5ccc6af5e88e ("nios2: Memory management")
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Dinh Nguyen <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/microblaze/include/asm/uaccess.h | 18 +++++++++---------
arch/nios2/include/asm/uaccess.h | 26 ++++++++++++++++----------
2 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 5b6e0e7788f4..3fe96979d2c6 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -130,27 +130,27 @@ extern long __user_bad(void);
#define __get_user(x, ptr) \
({ \
- unsigned long __gu_val = 0; \
long __gu_err; \
switch (sizeof(*(ptr))) { \
case 1: \
- __get_user_asm("lbu", (ptr), __gu_val, __gu_err); \
+ __get_user_asm("lbu", (ptr), x, __gu_err); \
break; \
case 2: \
- __get_user_asm("lhu", (ptr), __gu_val, __gu_err); \
+ __get_user_asm("lhu", (ptr), x, __gu_err); \
break; \
case 4: \
- __get_user_asm("lw", (ptr), __gu_val, __gu_err); \
+ __get_user_asm("lw", (ptr), x, __gu_err); \
break; \
- case 8: \
- __gu_err = __copy_from_user(&__gu_val, ptr, 8); \
- if (__gu_err) \
- __gu_err = -EFAULT; \
+ case 8: { \
+ __u64 __x = 0; \
+ __gu_err = raw_copy_from_user(&__x, ptr, 8) ? \
+ -EFAULT : 0; \
+ (x) = (typeof(x))(typeof((x) - (x)))__x; \
break; \
+ } \
default: \
/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
} \
- x = (__force __typeof__(*(ptr))) __gu_val; \
__gu_err; \
})
diff --git a/arch/nios2/include/asm/uaccess.h b/arch/nios2/include/asm/uaccess.h
index ba9340e96fd4..ca9285a915ef 100644
--- a/arch/nios2/include/asm/uaccess.h
+++ b/arch/nios2/include/asm/uaccess.h
@@ -88,6 +88,7 @@ extern __must_check long strnlen_user(const char __user *s, long n);
/* Optimized macros */
#define __get_user_asm(val, insn, addr, err) \
{ \
+ unsigned long __gu_val; \
__asm__ __volatile__( \
" movi %0, %3\n" \
"1: " insn " %1, 0(%2)\n" \
@@ -96,14 +97,20 @@ extern __must_check long strnlen_user(const char __user *s, long n);
" .section __ex_table,\"a\"\n" \
" .word 1b, 2b\n" \
" .previous" \
- : "=&r" (err), "=r" (val) \
+ : "=&r" (err), "=r" (__gu_val) \
: "r" (addr), "i" (-EFAULT)); \
+ val = (__force __typeof__(*(addr)))__gu_val; \
}
-#define __get_user_unknown(val, size, ptr, err) do { \
+extern void __get_user_unknown(void);
+
+#define __get_user_8(val, ptr, err) do { \
+ u64 __val = 0; \
err = 0; \
- if (__copy_from_user(&(val), ptr, size)) { \
+ if (raw_copy_from_user(&(__val), ptr, sizeof(val))) { \
err = -EFAULT; \
+ } else { \
+ val = (typeof(val))(typeof((val) - (val)))__val; \
} \
} while (0)
@@ -119,8 +126,11 @@ do { \
case 4: \
__get_user_asm(val, "ldw", ptr, err); \
break; \
+ case 8: \
+ __get_user_8(val, ptr, err); \
+ break; \
default: \
- __get_user_unknown(val, size, ptr, err); \
+ __get_user_unknown(); \
break; \
} \
} while (0)
@@ -129,9 +139,7 @@ do { \
({ \
long __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
- unsigned long __gu_val = 0; \
- __get_user_common(__gu_val, sizeof(*(ptr)), __gu_ptr, __gu_err);\
- (x) = (__force __typeof__(x))__gu_val; \
+ __get_user_common(x, sizeof(*(ptr)), __gu_ptr, __gu_err); \
__gu_err; \
})
@@ -139,11 +147,9 @@ do { \
({ \
long __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
- unsigned long __gu_val = 0; \
if (access_ok( __gu_ptr, sizeof(*__gu_ptr))) \
- __get_user_common(__gu_val, sizeof(*__gu_ptr), \
+ __get_user_common(x, sizeof(*__gu_ptr), \
__gu_ptr, __gu_err); \
- (x) = (__force __typeof__(x))__gu_val; \
__gu_err; \
})
--
2.34.1
From: Chao Yu <[email protected]>
[ Upstream commit d284af43f703760e261b1601378a0c13a19d5f1f ]
In lz4_decompress_pages(), if size of decompressed data is not equal to
expected one, we should print the size rather than size of target buffer
for decompressed data, fix it.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/compress.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index 58d255d3a518..6adf04725954 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -312,10 +312,9 @@ static int lz4_decompress_pages(struct decompress_io_ctx *dic)
}
if (ret != PAGE_SIZE << dic->log_cluster_size) {
- printk_ratelimited("%sF2FS-fs (%s): lz4 invalid rlen:%zu, "
+ printk_ratelimited("%sF2FS-fs (%s): lz4 invalid ret:%d, "
"expected:%lu\n", KERN_ERR,
- F2FS_I_SB(dic->inode)->sb->s_id,
- dic->rlen,
+ F2FS_I_SB(dic->inode)->sb->s_id, ret,
PAGE_SIZE << dic->log_cluster_size);
return -EIO;
}
--
2.34.1
From: Trond Myklebust <[email protected]>
[ Upstream commit 64cfca85bacde54caa64e0ab855c48734894fa37 ]
Valid return values for decode_dirent() callback functions are:
0: Success
-EBADCOOKIE: End of directory
-EAGAIN: End of xdr_stream
All errors need to map into one of those three values.
Fixes: 573c4e1ef53a ("NFS: Simplify ->decode_dirent() calling sequence")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs2xdr.c | 2 +-
fs/nfs/nfs3xdr.c | 21 ++++++---------------
2 files changed, 7 insertions(+), 16 deletions(-)
diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index 7fba7711e6b3..3d5ba43f44bb 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -949,7 +949,7 @@ int nfs2_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
error = decode_filename_inline(xdr, &entry->name, &entry->len);
if (unlikely(error))
- return error;
+ return -EAGAIN;
/*
* The type (size and byte order) of nfscookie isn't defined in
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index 54a1d21cbcc6..7ab60ad98776 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -1967,7 +1967,6 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
bool plus)
{
struct user_namespace *userns = rpc_userns(entry->server->client);
- struct nfs_entry old = *entry;
__be32 *p;
int error;
u64 new_cookie;
@@ -1987,15 +1986,15 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
error = decode_fileid3(xdr, &entry->ino);
if (unlikely(error))
- return error;
+ return -EAGAIN;
error = decode_inline_filename3(xdr, &entry->name, &entry->len);
if (unlikely(error))
- return error;
+ return -EAGAIN;
error = decode_cookie3(xdr, &new_cookie);
if (unlikely(error))
- return error;
+ return -EAGAIN;
entry->d_type = DT_UNKNOWN;
@@ -2003,7 +2002,7 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
entry->fattr->valid = 0;
error = decode_post_op_attr(xdr, entry->fattr, userns);
if (unlikely(error))
- return error;
+ return -EAGAIN;
if (entry->fattr->valid & NFS_ATTR_FATTR_V3)
entry->d_type = nfs_umode_to_dtype(entry->fattr->mode);
@@ -2018,11 +2017,8 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
return -EAGAIN;
if (*p != xdr_zero) {
error = decode_nfs_fh3(xdr, entry->fh);
- if (unlikely(error)) {
- if (error == -E2BIG)
- goto out_truncated;
- return error;
- }
+ if (unlikely(error))
+ return -EAGAIN;
} else
zero_nfs_fh3(entry->fh);
}
@@ -2031,11 +2027,6 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
entry->cookie = new_cookie;
return 0;
-
-out_truncated:
- dprintk("NFS: directory entry contains invalid file handle\n");
- *entry = old;
- return -EAGAIN;
}
/*
--
2.34.1
From: Thomas Bracht Laumann Jespersen <[email protected]>
[ Upstream commit a8b309ce9760943486e0585285e0125588a31650 ]
Running with POSIXLY_CORRECT=1 in the environment the scripts/dtc build
fails, because pkg-config doesn't output anything when the flags come
after the arguments.
Fixes: 067c650c456e ("dtc: Use pkg-config to locate libyaml")
Signed-off-by: Thomas Bracht Laumann Jespersen <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/dtc/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 95aaf7431bff..1cba78e1dce6 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -29,7 +29,7 @@ dtc-objs += yamltree.o
# To include <yaml.h> installed in a non-default path
HOSTCFLAGS_yamltree.o := $(shell pkg-config --cflags yaml-0.1)
# To link libyaml installed in a non-default path
-HOSTLDLIBS_dtc := $(shell pkg-config yaml-0.1 --libs)
+HOSTLDLIBS_dtc := $(shell pkg-config --libs yaml-0.1)
endif
# Generated files need one more search path to include headers in source tree
--
2.34.1
From: Christian Göttsche <[email protected]>
[ Upstream commit b97df7c098c531010e445da88d02b7bf7bf59ef6 ]
security_sid_to_context() expects a pointer to an u32 as the address
where to store the length of the computed context.
Reported by sparse:
security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
(different signedness)
security/selinux/xfrm.c:359:39: expected unsigned int
[usertype] *scontext_len
security/selinux/xfrm.c:359:39: got int *
Signed-off-by: Christian Göttsche <[email protected]>
[PM: wrapped commit description]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/xfrm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index be83e5ce4469..debe15207d2b 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -347,7 +347,7 @@ int selinux_xfrm_state_alloc_acquire(struct xfrm_state *x,
int rc;
struct xfrm_sec_ctx *ctx;
char *ctx_str = NULL;
- int str_len;
+ u32 str_len;
if (!polsec)
return 0;
--
2.34.1
From: Saurav Kashyap <[email protected]>
commit 31e6cdbe0eae37badceb5e0d4f06cf051432fd77 upstream.
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put().
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Co-developed-by: Daniel Wagner <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_bsg.c | 6 +-
drivers/scsi/qla2xxx/qla_def.h | 5 ++
drivers/scsi/qla2xxx/qla_edif.c | 3 -
drivers/scsi/qla2xxx/qla_gbl.h | 1
drivers/scsi/qla2xxx/qla_gs.c | 85 +++++++++++++++++++++++++-------------
drivers/scsi/qla2xxx/qla_init.c | 70 +++++++++++++++++++++----------
drivers/scsi/qla2xxx/qla_inline.h | 2
drivers/scsi/qla2xxx/qla_iocb.c | 41 ++++++++++++++----
drivers/scsi/qla2xxx/qla_mbx.c | 4 +
drivers/scsi/qla2xxx/qla_mid.c | 4 +
drivers/scsi/qla2xxx/qla_mr.c | 4 +
drivers/scsi/qla2xxx/qla_os.c | 14 ++++--
drivers/scsi/qla2xxx/qla_target.c | 4 -
13 files changed, 173 insertions(+), 70 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -29,7 +29,8 @@ void qla2x00_bsg_job_done(srb_t *sp, int
"%s: sp hdl %x, result=%x bsg ptr %p\n",
__func__, sp->handle, res, bsg_job);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
bsg_reply->result = res;
bsg_job_done(bsg_job, bsg_reply->result,
@@ -3010,6 +3011,7 @@ qla24xx_bsg_timeout(struct bsg_job *bsg_
done:
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return 0;
}
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -726,6 +726,11 @@ typedef struct srb {
* code.
*/
void (*put_fn)(struct kref *kref);
+
+ /*
+ * Report completion for asynchronous commands.
+ */
+ void (*async_done)(struct srb *sp, int res);
} srb_t;
#define GET_CMD_SP(sp) (sp->u.scmd.cmd)
--- a/drivers/scsi/qla2xxx/qla_edif.c
+++ b/drivers/scsi/qla2xxx/qla_edif.c
@@ -2161,7 +2161,8 @@ edif_doorbell_show(struct device *dev, s
static void qla_noop_sp_done(srb_t *sp, int res)
{
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
/*
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -333,6 +333,7 @@ extern int qla24xx_get_one_block_sg(uint
extern int qla24xx_configure_prot_mode(srb_t *, uint16_t *);
extern int qla24xx_issue_sa_replace_iocb(scsi_qla_host_t *vha,
struct qla_work_evt *e);
+void qla2x00_sp_release(struct kref *kref);
/*
* Global Function Prototypes in qla_mbx.c source file.
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -529,7 +529,6 @@ static void qla2x00_async_sns_sp_done(sr
if (!e)
goto err2;
- del_timer(&sp->u.iocb_cmd.timer);
e->u.iosb.sp = sp;
qla2x00_post_work(vha, e);
return;
@@ -556,8 +555,8 @@ err2:
sp->u.iocb_cmd.u.ctarg.rsp = NULL;
}
- sp->free(sp);
-
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return;
}
@@ -592,6 +591,7 @@ static int qla_async_rftid(scsi_qla_host
if (!vha->flags.online)
goto done;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
if (!sp)
goto done;
@@ -652,7 +652,8 @@ static int qla_async_rftid(scsi_qla_host
}
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
@@ -687,6 +688,7 @@ static int qla_async_rffid(scsi_qla_host
srb_t *sp;
struct ct_sns_pkt *ct_sns;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
if (!sp)
goto done;
@@ -747,7 +749,8 @@ static int qla_async_rffid(scsi_qla_host
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
@@ -777,6 +780,7 @@ static int qla_async_rnnid(scsi_qla_host
srb_t *sp;
struct ct_sns_pkt *ct_sns;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
if (!sp)
goto done;
@@ -836,7 +840,8 @@ static int qla_async_rnnid(scsi_qla_host
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
@@ -882,6 +887,7 @@ static int qla_async_rsnn_nn(scsi_qla_ho
srb_t *sp;
struct ct_sns_pkt *ct_sns;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
if (!sp)
goto done;
@@ -947,7 +953,8 @@ static int qla_async_rsnn_nn(scsi_qla_ho
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
@@ -2886,7 +2893,8 @@ static void qla24xx_async_gpsc_sp_done(s
qla24xx_handle_gpsc_event(vha, &ea);
done:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int qla24xx_async_gpsc(scsi_qla_host_t *vha, fc_port_t *fcport)
@@ -2898,6 +2906,7 @@ int qla24xx_async_gpsc(scsi_qla_host_t *
if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT))
return rval;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
@@ -2937,7 +2946,8 @@ int qla24xx_async_gpsc(scsi_qla_host_t *
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
@@ -2986,7 +2996,8 @@ void qla24xx_sp_unmap(scsi_qla_host_t *v
break;
}
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
void qla24xx_handle_gpnid_event(scsi_qla_host_t *vha, struct event_arg *ea)
@@ -3125,13 +3136,15 @@ static void qla2x00_async_gpnid_sp_done(
if (res) {
if (res == QLA_FUNCTION_TIMEOUT) {
qla24xx_post_gpnid_work(sp->vha, &ea.id);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return;
}
} else if (sp->gen1) {
/* There was another RSCN for this Nport ID */
qla24xx_post_gpnid_work(sp->vha, &ea.id);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return;
}
@@ -3152,7 +3165,8 @@ static void qla2x00_async_gpnid_sp_done(
sp->u.iocb_cmd.u.ctarg.rsp_dma);
sp->u.iocb_cmd.u.ctarg.rsp = NULL;
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return;
}
@@ -3172,6 +3186,7 @@ int qla24xx_async_gpnid(scsi_qla_host_t
if (!vha->flags.online)
goto done;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
if (!sp)
goto done;
@@ -3188,7 +3203,8 @@ int qla24xx_async_gpnid(scsi_qla_host_t
if (tsp->u.iocb_cmd.u.ctarg.id.b24 == id->b24) {
tsp->gen1++;
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
goto done;
}
}
@@ -3258,8 +3274,8 @@ done_free_sp:
sp->u.iocb_cmd.u.ctarg.rsp_dma);
sp->u.iocb_cmd.u.ctarg.rsp = NULL;
}
-
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
@@ -3314,7 +3330,8 @@ void qla24xx_async_gffid_sp_done(srb_t *
ea.rc = res;
qla24xx_handle_gffid_event(vha, &ea);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
/* Get FC4 Feature with Nport ID. */
@@ -3327,6 +3344,7 @@ int qla24xx_async_gffid(scsi_qla_host_t
if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT))
return rval;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
return rval;
@@ -3365,7 +3383,8 @@ int qla24xx_async_gffid(scsi_qla_host_t
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
fcport->flags &= ~FCF_ASYNC_SENT;
return rval;
}
@@ -3752,7 +3771,6 @@ static void qla2x00_async_gpnft_gnnft_sp
"Async done-%s res %x FC4Type %x\n",
sp->name, res, sp->gen2);
- del_timer(&sp->u.iocb_cmd.timer);
sp->rc = res;
if (res) {
unsigned long flags;
@@ -3920,8 +3938,8 @@ done_free_sp:
sp->u.iocb_cmd.u.ctarg.rsp_dma);
sp->u.iocb_cmd.u.ctarg.rsp = NULL;
}
-
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
spin_lock_irqsave(&vha->work_lock, flags);
vha->scan.scan_flags &= ~SF_SCANNING;
@@ -3973,9 +3991,12 @@ int qla24xx_async_gpnft(scsi_qla_host_t
ql_dbg(ql_dbg_disc + ql_dbg_verbose, vha, 0xffff,
"%s: Performing FCP Scan\n", __func__);
- if (sp)
- sp->free(sp); /* should not happen */
+ if (sp) {
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
+ }
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
if (!sp) {
spin_lock_irqsave(&vha->work_lock, flags);
@@ -4020,6 +4041,7 @@ int qla24xx_async_gpnft(scsi_qla_host_t
sp->u.iocb_cmd.u.ctarg.req,
sp->u.iocb_cmd.u.ctarg.req_dma);
sp->u.iocb_cmd.u.ctarg.req = NULL;
+ /* ref: INIT */
qla2x00_rel_sp(sp);
return rval;
}
@@ -4082,7 +4104,8 @@ done_free_sp:
sp->u.iocb_cmd.u.ctarg.rsp = NULL;
}
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
spin_lock_irqsave(&vha->work_lock, flags);
vha->scan.scan_flags &= ~SF_SCANNING;
@@ -4146,7 +4169,8 @@ static void qla2x00_async_gnnid_sp_done(
qla24xx_handle_gnnid_event(vha, &ea);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int qla24xx_async_gnnid(scsi_qla_host_t *vha, fc_port_t *fcport)
@@ -4159,6 +4183,7 @@ int qla24xx_async_gnnid(scsi_qla_host_t
return rval;
qla2x00_set_fcport_disc_state(fcport, DSC_GNN_ID);
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC);
if (!sp)
goto done;
@@ -4199,7 +4224,8 @@ int qla24xx_async_gnnid(scsi_qla_host_t
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
fcport->flags &= ~FCF_ASYNC_SENT;
done:
return rval;
@@ -4273,7 +4299,8 @@ static void qla2x00_async_gfpnid_sp_done
qla24xx_handle_gfpnid_event(vha, &ea);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int qla24xx_async_gfpnid(scsi_qla_host_t *vha, fc_port_t *fcport)
@@ -4285,6 +4312,7 @@ int qla24xx_async_gfpnid(scsi_qla_host_t
if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT))
return rval;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC);
if (!sp)
goto done;
@@ -4325,7 +4353,8 @@ int qla24xx_async_gfpnid(scsi_qla_host_t
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -51,6 +51,9 @@ qla2x00_sp_timeout(struct timer_list *t)
WARN_ON(irqs_disabled());
iocb = &sp->u.iocb_cmd;
iocb->timeout(sp);
+
+ /* ref: TMR */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
void qla2x00_sp_free(srb_t *sp)
@@ -125,8 +128,13 @@ static void qla24xx_abort_iocb_timeout(v
}
spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
- if (sp->cmd_sp)
+ if (sp->cmd_sp) {
+ /*
+ * This done function should take care of
+ * original command ref: INIT
+ */
sp->cmd_sp->done(sp->cmd_sp, QLA_OS_TIMER_EXPIRED);
+ }
abt->u.abt.comp_status = cpu_to_le16(CS_TIMEOUT);
sp->done(sp, QLA_OS_TIMER_EXPIRED);
@@ -140,11 +148,11 @@ static void qla24xx_abort_sp_done(srb_t
if (orig_sp)
qla_wait_nvme_release_cmd_kref(orig_sp);
- del_timer(&sp->u.iocb_cmd.timer);
if (sp->flags & SRB_WAKEUP_ON_COMP)
complete(&abt->u.abt.comp);
else
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait)
@@ -154,6 +162,7 @@ int qla24xx_async_abort_cmd(srb_t *cmd_s
srb_t *sp;
int rval = QLA_FUNCTION_FAILED;
+ /* ref: INIT for ABTS command */
sp = qla2xxx_get_qpair_sp(cmd_sp->vha, cmd_sp->qpair, cmd_sp->fcport,
GFP_ATOMIC);
if (!sp)
@@ -181,7 +190,8 @@ int qla24xx_async_abort_cmd(srb_t *cmd_s
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return rval;
}
@@ -189,7 +199,8 @@ int qla24xx_async_abort_cmd(srb_t *cmd_s
wait_for_completion(&abt_iocb->u.abt.comp);
rval = abt_iocb->u.abt.comp_status == CS_COMPLETE ?
QLA_SUCCESS : QLA_ERR_FROM_FW;
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
return rval;
@@ -287,7 +298,8 @@ static void qla2x00_async_login_sp_done(
qla24xx_handle_plogi_done_event(vha, &ea);
}
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int
@@ -306,6 +318,7 @@ qla2x00_async_login(struct scsi_qla_host
return rval;
}
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
@@ -355,7 +368,8 @@ qla2x00_async_login(struct scsi_qla_host
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
fcport->flags &= ~FCF_ASYNC_SENT;
done:
fcport->flags &= ~FCF_ASYNC_ACTIVE;
@@ -367,7 +381,8 @@ static void qla2x00_async_logout_sp_done
sp->fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE);
sp->fcport->login_gen++;
qlt_logo_completion_handler(sp->fcport, sp->u.iocb_cmd.u.logio.data[0]);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int
@@ -377,6 +392,7 @@ qla2x00_async_logout(struct scsi_qla_hos
int rval = QLA_FUNCTION_FAILED;
fcport->flags |= FCF_ASYNC_SENT;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
@@ -398,7 +414,8 @@ qla2x00_async_logout(struct scsi_qla_hos
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE);
return rval;
@@ -424,7 +441,8 @@ static void qla2x00_async_prlo_sp_done(s
if (!test_bit(UNLOADING, &vha->dpc_flags))
qla2x00_post_async_prlo_done_work(sp->fcport->vha, sp->fcport,
lio->u.logio.data);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int
@@ -434,6 +452,7 @@ qla2x00_async_prlo(struct scsi_qla_host
int rval;
rval = QLA_FUNCTION_FAILED;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
@@ -455,7 +474,8 @@ qla2x00_async_prlo(struct scsi_qla_host
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
fcport->flags &= ~FCF_ASYNC_ACTIVE;
return rval;
@@ -540,8 +560,8 @@ static void qla2x00_async_adisc_sp_done(
ea.sp = sp;
qla24xx_handle_adisc_event(vha, &ea);
-
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int
@@ -556,6 +576,7 @@ qla2x00_async_adisc(struct scsi_qla_host
return rval;
fcport->flags |= FCF_ASYNC_SENT;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
@@ -583,7 +604,8 @@ qla2x00_async_adisc(struct scsi_qla_host
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE);
qla2x00_post_async_adisc_work(vha, fcport, data);
@@ -1064,7 +1086,8 @@ static void qla24xx_async_gnl_sp_done(sr
}
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int qla24xx_async_gnl(struct scsi_qla_host *vha, fc_port_t *fcport)
@@ -1094,6 +1117,7 @@ int qla24xx_async_gnl(struct scsi_qla_ho
vha->gnl.sent = 1;
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
@@ -1126,7 +1150,8 @@ int qla24xx_async_gnl(struct scsi_qla_ho
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
fcport->flags &= ~(FCF_ASYNC_ACTIVE | FCF_ASYNC_SENT);
return rval;
@@ -1172,7 +1197,7 @@ done:
dma_pool_free(ha->s_dma_pool, sp->u.iocb_cmd.u.mbx.in,
sp->u.iocb_cmd.u.mbx.in_dma);
- sp->free(sp);
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport)
@@ -1217,7 +1242,7 @@ static void qla2x00_async_prli_sp_done(s
qla24xx_handle_prli_done_event(vha, &ea);
}
- sp->free(sp);
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int
@@ -1275,7 +1300,8 @@ qla24xx_async_prli(struct scsi_qla_host
return rval;
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
fcport->flags &= ~FCF_ASYNC_SENT;
return rval;
}
@@ -1360,7 +1386,7 @@ done_free_sp:
if (pd)
dma_pool_free(ha->s_dma_pool, pd, pd_dma);
- sp->free(sp);
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
fcport->flags &= ~FCF_ASYNC_SENT;
done:
fcport->flags &= ~FCF_ASYNC_ACTIVE;
@@ -1926,6 +1952,7 @@ qla2x00_async_tm_cmd(fc_port_t *fcport,
srb_t *sp;
int rval = QLA_FUNCTION_FAILED;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
@@ -1969,7 +1996,8 @@ qla2x00_async_tm_cmd(fc_port_t *fcport,
}
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
fcport->flags &= ~FCF_ASYNC_SENT;
done:
return rval;
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -184,6 +184,8 @@ static void qla2xxx_init_sp(srb_t *sp, s
sp->vha = vha;
sp->qpair = qpair;
sp->cmd_type = TYPE_SRB;
+ /* ref : INIT - normal flow */
+ kref_init(&sp->cmd_kref);
INIT_LIST_HEAD(&sp->elem);
}
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2561,6 +2561,14 @@ qla24xx_tm_iocb(srb_t *sp, struct tsk_mg
}
void
+qla2x00_sp_release(struct kref *kref)
+{
+ struct srb *sp = container_of(kref, struct srb, cmd_kref);
+
+ sp->free(sp);
+}
+
+void
qla2x00_init_async_sp(srb_t *sp, unsigned long tmo,
void (*done)(struct srb *sp, int res))
{
@@ -2655,7 +2663,9 @@ qla24xx_els_dcmd_iocb(scsi_qla_host_t *v
return -ENOMEM;
}
- /* Alloc SRB structure */
+ /* Alloc SRB structure
+ * ref: INIT
+ */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp) {
kfree(fcport);
@@ -2687,7 +2697,8 @@ qla24xx_els_dcmd_iocb(scsi_qla_host_t *v
GFP_KERNEL);
if (!elsio->u.els_logo.els_logo_pyld) {
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return QLA_FUNCTION_FAILED;
}
@@ -2710,7 +2721,8 @@ qla24xx_els_dcmd_iocb(scsi_qla_host_t *v
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return QLA_FUNCTION_FAILED;
}
@@ -2721,7 +2733,8 @@ qla24xx_els_dcmd_iocb(scsi_qla_host_t *v
wait_for_completion(&elsio->u.els_logo.comp);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return rval;
}
@@ -2854,7 +2867,6 @@ static void qla2x00_els_dcmd2_sp_done(sr
sp->name, res, sp->handle, fcport->d_id.b24, fcport->port_name);
fcport->flags &= ~(FCF_ASYNC_SENT|FCF_ASYNC_ACTIVE);
- del_timer(&sp->u.iocb_cmd.timer);
if (sp->flags & SRB_WAKEUP_ON_COMP)
complete(&lio->u.els_plogi.comp);
@@ -2964,7 +2976,8 @@ static void qla2x00_els_dcmd2_sp_done(sr
struct srb_iocb *elsio = &sp->u.iocb_cmd;
qla2x00_els_dcmd2_free(vha, &elsio->u.els_plogi);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return;
}
e->u.iosb.sp = sp;
@@ -2982,7 +2995,9 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *
int rval = QLA_SUCCESS;
void *ptr, *resp_ptr;
- /* Alloc SRB structure */
+ /* Alloc SRB structure
+ * ref: INIT
+ */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp) {
ql_log(ql_log_info, vha, 0x70e6,
@@ -3072,7 +3087,8 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *
out:
fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE);
qla2x00_els_dcmd2_free(vha, &elsio->u.els_plogi);
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
@@ -3883,8 +3899,15 @@ qla2x00_start_sp(srb_t *sp)
break;
}
- if (sp->start_timer)
+ if (sp->start_timer) {
+ /* ref: TMR timer ref
+ * this code should be just before start_iocbs function
+ * This will make sure that caller function don't to do
+ * kref_put even on failure
+ */
+ kref_get(&sp->cmd_kref);
add_timer(&sp->u.iocb_cmd.timer);
+ }
wmb();
qla2x00_start_iocbs(vha, qp->req);
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -6479,6 +6479,7 @@ int qla24xx_send_mb_cmd(struct scsi_qla_
if (!vha->hw->flags.fw_started)
goto done;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, NULL, GFP_KERNEL);
if (!sp)
goto done;
@@ -6524,7 +6525,8 @@ int qla24xx_send_mb_cmd(struct scsi_qla_
}
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -965,6 +965,7 @@ int qla24xx_control_vp(scsi_qla_host_t *
if (vp_index == 0 || vp_index >= ha->max_npiv_vports)
return QLA_PARAMETER_ERROR;
+ /* ref: INIT */
sp = qla2x00_get_sp(base_vha, NULL, GFP_KERNEL);
if (!sp)
return rval;
@@ -1007,6 +1008,7 @@ int qla24xx_control_vp(scsi_qla_host_t *
break;
}
done:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
return rval;
}
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -1787,6 +1787,7 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc
struct register_host_info *preg_hsi;
struct new_utsname *p_sysid = NULL;
+ /* ref: INIT */
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
if (!sp)
goto done;
@@ -1973,7 +1974,8 @@ done_unmap_req:
dma_free_coherent(&ha->pdev->dev, fdisc->u.fxiocb.req_len,
fdisc->u.fxiocb.req_addr, fdisc->u.fxiocb.req_dma_handle);
done_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
return rval;
}
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -728,7 +728,8 @@ void qla2x00_sp_compl(srb_t *sp, int res
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct completion *comp = sp->comp;
- sp->free(sp);
+ /* kref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
cmd->result = res;
CMD_SP(cmd) = NULL;
cmd->scsi_done(cmd);
@@ -819,7 +820,8 @@ void qla2xxx_qpair_sp_compl(srb_t *sp, i
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct completion *comp = sp->comp;
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
cmd->result = res;
CMD_SP(cmd) = NULL;
cmd->scsi_done(cmd);
@@ -919,6 +921,7 @@ qla2xxx_queuecommand(struct Scsi_Host *h
goto qc24_target_busy;
sp = scsi_cmd_priv(cmd);
+ /* ref: INIT */
qla2xxx_init_sp(sp, vha, vha->hw->base_qpair, fcport);
sp->u.scmd.cmd = cmd;
@@ -938,7 +941,8 @@ qla2xxx_queuecommand(struct Scsi_Host *h
return 0;
qc24_host_busy_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
qc24_target_busy:
return SCSI_MLQUEUE_TARGET_BUSY;
@@ -1008,6 +1012,7 @@ qla2xxx_mqueuecommand(struct Scsi_Host *
goto qc24_target_busy;
sp = scsi_cmd_priv(cmd);
+ /* ref: INIT */
qla2xxx_init_sp(sp, vha, qpair, fcport);
sp->u.scmd.cmd = cmd;
@@ -1026,7 +1031,8 @@ qla2xxx_mqueuecommand(struct Scsi_Host *
return 0;
qc24_host_busy_free_sp:
- sp->free(sp);
+ /* ref: INIT */
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
qc24_target_busy:
return SCSI_MLQUEUE_TARGET_BUSY;
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -620,7 +620,7 @@ static void qla2x00_async_nack_sp_done(s
}
spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
- sp->free(sp);
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
}
int qla24xx_async_notify_ack(scsi_qla_host_t *vha, fc_port_t *fcport,
@@ -672,7 +672,7 @@ int qla24xx_async_notify_ack(scsi_qla_ho
return rval;
done_free_sp:
- sp->free(sp);
+ kref_put(&sp->cmd_kref, qla2x00_sp_release);
done:
fcport->flags &= ~FCF_ASYNC_SENT;
return rval;
From: Amadeusz Sławiński <[email protected]>
commit feb00b736af64875560f371fe7f58b0b7f239046 upstream.
There is no reason to force readwrite access on TLV controls. It can be
either read, write or both. This is further evidenced in code where it
performs following checks:
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READ) && !sbe->get)
return -EINVAL;
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_WRITE) && !sbe->put)
return -EINVAL;
Fixes: 1a3232d2f61d ("ASoC: topology: Add support for TLV bytes controls")
Signed-off-by: Amadeusz Sławiński <[email protected]>
Reviewed-by: Cezary Rojewski <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-topology.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -510,7 +510,8 @@ static int soc_tplg_kcontrol_bind_io(str
if (le32_to_cpu(hdr->ops.info) == SND_SOC_TPLG_CTL_BYTES
&& k->iface & SNDRV_CTL_ELEM_IFACE_MIXER
- && k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE
+ && (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READ
+ || k->access & SNDRV_CTL_ELEM_ACCESS_TLV_WRITE)
&& k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
struct soc_bytes_ext *sbe;
struct snd_soc_tplg_bytes_control *be;
From: Saurav Kashyap <[email protected]>
commit a60447e7d451df42c7bde43af53b34f10f34f469 upstream.
[ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020
[ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1
[ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018
[ 12.356356] Call Trace:
[ 12.358821] dump_stack_lvl+0x34/0x44
[ 12.362514] check_preemption_disabled+0xd9/0xe0
[ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx]
[ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40
[ 12.384284] local_pci_probe+0x42/0x80
[ 12.390162] ? pci_match_device+0xd7/0x110
[ 12.396366] pci_device_probe+0xfd/0x1b0
[ 12.402372] really_probe+0x1e7/0x3e0
[ 12.408114] __driver_probe_device+0xfe/0x180
[ 12.414544] driver_probe_device+0x1e/0x90
[ 12.420685] __driver_attach+0xc0/0x1c0
[ 12.426536] ? __device_attach_driver+0xe0/0xe0
[ 12.433061] ? __device_attach_driver+0xe0/0xe0
[ 12.439538] bus_for_each_dev+0x78/0xc0
[ 12.445294] bus_add_driver+0x12b/0x1e0
[ 12.451021] driver_register+0x8f/0xe0
[ 12.456631] ? 0xffffffffc07bc000
[ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx]
[ 12.468776] do_one_initcall+0x44/0x200
[ 12.474401] ? load_module+0xad3/0xba0
[ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410
[ 12.486268] do_init_module+0x5c/0x280
[ 12.491730] __do_sys_init_module+0x12e/0x1b0
[ 12.497785] do_syscall_64+0x3b/0x90
[ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 12.509764] RIP: 0033:0x7f554f73ab2e
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -9393,7 +9393,7 @@ struct qla_qpair *qla2xxx_create_qpair(s
qpair->rsp->req = qpair->req;
qpair->rsp->qpair = qpair;
/* init qpair to this cpu. Will adjust at run time. */
- qla_cpu_update(qpair, smp_processor_id());
+ qla_cpu_update(qpair, raw_smp_processor_id());
if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4)
From: Maciej W. Rozycki <[email protected]>
[ Upstream commit 6ddcba9d480b6bcced4223a729794dfa6becb7eb ]
It makes no sense to fall through to `break'. Therefore reorder the
switch statements so as to have the Cavium cases first, followed by the
default case, which improves readability and pacifies code analysis
tools. No change in semantics, assembly produced is exactly the same.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: bc431d2153cc ("MIPS: Fix fall-through warnings for Clang")
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/mm/tlbex.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 9adad24c2e65..046d51a454af 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -2167,16 +2167,14 @@ static void build_r4000_tlb_load_handler(void)
uasm_i_tlbr(&p);
switch (current_cpu_type()) {
- default:
- if (cpu_has_mips_r2_exec_hazard) {
- uasm_i_ehb(&p);
- fallthrough;
-
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
- break;
- }
+ break;
+ default:
+ if (cpu_has_mips_r2_exec_hazard)
+ uasm_i_ehb(&p);
+ break;
}
/* Examine entrylo 0 or 1 based on ptr. */
@@ -2243,15 +2241,14 @@ static void build_r4000_tlb_load_handler(void)
uasm_i_tlbr(&p);
switch (current_cpu_type()) {
- default:
- if (cpu_has_mips_r2_exec_hazard) {
- uasm_i_ehb(&p);
-
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
- break;
- }
+ break;
+ default:
+ if (cpu_has_mips_r2_exec_hazard)
+ uasm_i_ehb(&p);
+ break;
}
/* Examine entrylo 0 or 1 based on ptr. */
--
2.34.1
From: Jian Shen <[email protected]>
[ Upstream commit 190cd8a72b0181c543ecada6243be3a50636941b ]
Currently, when PF set VF VLAN, it sends notify mailbox to VF
if VF alive. VF stop its traffic, and send request mailbox
to PF, then PF updates VF VLAN. It's a bit complex. If VF is
killed before sending request, PF will not set VF VLAN without
any log.
This patch refines the process, PF can set VF VLAN direclty,
and then notify the VF. If VF is resetting at that time, the
notify may be dropped, so VF should query it after reset finished.
Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../hisilicon/hns3/hns3pf/hclge_main.c | 18 +++++++++++++-----
.../hisilicon/hns3/hns3vf/hclgevf_main.c | 5 +++++
2 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 0b0b79eec1a6..d3a259ad8ce1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -9290,11 +9290,16 @@ static int hclge_set_vf_mac(struct hnae3_handle *handle, int vf,
ether_addr_copy(vport->vf_info.mac, mac_addr);
+ /* there is a timewindow for PF to know VF unalive, it may
+ * cause send mailbox fail, but it doesn't matter, VF will
+ * query it when reinit.
+ */
if (test_bit(HCLGE_VPORT_STATE_ALIVE, &vport->state)) {
dev_info(&hdev->pdev->dev,
"MAC of VF %d has been set to %s, and it will be reinitialized!\n",
vf, format_mac_addr);
- return hclge_inform_reset_assert_to_vf(vport);
+ (void)hclge_inform_reset_assert_to_vf(vport);
+ return 0;
}
dev_info(&hdev->pdev->dev, "MAC of VF %d has been set to %s\n",
@@ -10522,14 +10527,17 @@ static int hclge_set_vf_vlan_filter(struct hnae3_handle *handle, int vfid,
return ret;
}
- /* for DEVICE_VERSION_V3, vf doesn't need to know about the port based
+ /* there is a timewindow for PF to know VF unalive, it may
+ * cause send mailbox fail, but it doesn't matter, VF will
+ * query it when reinit.
+ * for DEVICE_VERSION_V3, vf doesn't need to know about the port based
* VLAN state.
*/
if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V3 &&
test_bit(HCLGE_VPORT_STATE_ALIVE, &vport->state))
- hclge_push_vf_port_base_vlan_info(&hdev->vport[0],
- vport->vport_id, state,
- &vlan_info);
+ (void)hclge_push_vf_port_base_vlan_info(&hdev->vport[0],
+ vport->vport_id,
+ state, &vlan_info);
return 0;
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 98c847fe4c5b..21678c12afa2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -3344,6 +3344,11 @@ static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
return ret;
}
+ /* get current port based vlan state from PF */
+ ret = hclgevf_get_port_base_vlan_filter_state(hdev);
+ if (ret)
+ return ret;
+
set_bit(HCLGEVF_STATE_PROMISC_CHANGED, &hdev->state);
hclgevf_init_rxd_adv_layout(hdev);
--
2.34.1
From: Lucas Tanure <[email protected]>
[ Upstream commit cb13aa16f34f794a9cee2626862af8a95f0f0ee9 ]
Having meson_i2c_set_clk_div after i2c_add_adapter
causes issues for client drivers that try to use
the bus before the requested speed is applied.
The bus can be used just after i2c_add_adapter, so
move i2c_add_adapter to the final step as
meson_i2c_set_clk_div needs to be called before
the bus is used.
Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer")
Signed-off-by: Lucas Tanure <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-meson.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index ef73a42577cc..07eb819072c4 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -465,18 +465,18 @@ static int meson_i2c_probe(struct platform_device *pdev)
*/
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
- ret = i2c_add_adapter(&i2c->adap);
- if (ret < 0) {
- clk_disable_unprepare(i2c->clk);
- return ret;
- }
-
/* Disable filtering */
meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret < 0) {
+ clk_disable_unprepare(i2c->clk);
+ return ret;
+ }
+
return 0;
}
--
2.34.1
From: Yufeng Mo <[email protected]>
commit 9c9a04212fa380d2e7d1412bb281309955c0a781 upstream.
Currently, the debugfs mechanism is that all functions share a
global variable to save the pointer for obtaining data. When
different functions concurrently access the same file node,
repeated release exceptions occur. Therefore, the granularity
of the pointer for storing the obtained data is adjusted to be
private for each function.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 15 +++++++++++----
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.h | 1 -
3 files changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -835,6 +835,7 @@ struct hnae3_handle {
struct dentry *hnae3_dbgfs;
/* protects concurrent contention between debugfs commands */
struct mutex dbgfs_lock;
+ char **dbgfs_buf;
/* Network interface message level enabled bits */
u32 msg_enable;
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -1022,7 +1022,7 @@ static ssize_t hns3_dbg_read(struct file
return ret;
mutex_lock(&handle->dbgfs_lock);
- save_buf = &hns3_dbg_cmd[index].buf;
+ save_buf = &handle->dbgfs_buf[index];
if (!test_bit(HNS3_NIC_STATE_INITED, &priv->state) ||
test_bit(HNS3_NIC_STATE_RESETTING, &priv->state)) {
@@ -1127,6 +1127,13 @@ int hns3_dbg_init(struct hnae3_handle *h
int ret;
u32 i;
+ handle->dbgfs_buf = devm_kcalloc(&handle->pdev->dev,
+ ARRAY_SIZE(hns3_dbg_cmd),
+ sizeof(*handle->dbgfs_buf),
+ GFP_KERNEL);
+ if (!handle->dbgfs_buf)
+ return -ENOMEM;
+
hns3_dbg_dentry[HNS3_DBG_DENTRY_COMMON].dentry =
debugfs_create_dir(name, hns3_dbgfs_root);
handle->hnae3_dbgfs = hns3_dbg_dentry[HNS3_DBG_DENTRY_COMMON].dentry;
@@ -1175,9 +1182,9 @@ void hns3_dbg_uninit(struct hnae3_handle
u32 i;
for (i = 0; i < ARRAY_SIZE(hns3_dbg_cmd); i++)
- if (hns3_dbg_cmd[i].buf) {
- kvfree(hns3_dbg_cmd[i].buf);
- hns3_dbg_cmd[i].buf = NULL;
+ if (handle->dbgfs_buf[i]) {
+ kvfree(handle->dbgfs_buf[i]);
+ handle->dbgfs_buf[i] = NULL;
}
mutex_destroy(&handle->dbgfs_lock);
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.h
@@ -47,7 +47,6 @@ struct hns3_dbg_cmd_info {
enum hnae3_dbg_cmd cmd;
enum hns3_dbg_dentry_type dentry;
u32 buf_len;
- char *buf;
int (*init)(struct hnae3_handle *handle, unsigned int cmd);
};
From: Eric Dumazet <[email protected]>
commit 763087dab97547230a6807c865a6a5ae53a59247 upstream.
We have multiple places where this helper is convenient,
and plan using it in the following patch.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/skbuff.h | 10 ++++++++++
net/core/skbuff.c | 19 +++++--------------
2 files changed, 15 insertions(+), 14 deletions(-)
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1436,6 +1436,11 @@ static inline unsigned int skb_end_offse
{
return skb->end;
}
+
+static inline void skb_set_end_offset(struct sk_buff *skb, unsigned int offset)
+{
+ skb->end = offset;
+}
#else
static inline unsigned char *skb_end_pointer(const struct sk_buff *skb)
{
@@ -1446,6 +1451,11 @@ static inline unsigned int skb_end_offse
{
return skb->end - skb->head;
}
+
+static inline void skb_set_end_offset(struct sk_buff *skb, unsigned int offset)
+{
+ skb->end = skb->head + offset;
+}
#endif
/* Internal */
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -203,7 +203,7 @@ static void __build_skb_around(struct sk
skb->head = data;
skb->data = data;
skb_reset_tail_pointer(skb);
- skb->end = skb->tail + size;
+ skb_set_end_offset(skb, size);
skb->mac_header = (typeof(skb->mac_header))~0U;
skb->transport_header = (typeof(skb->transport_header))~0U;
@@ -1738,11 +1738,10 @@ int pskb_expand_head(struct sk_buff *skb
skb->head = data;
skb->head_frag = 0;
skb->data += off;
+
+ skb_set_end_offset(skb, size);
#ifdef NET_SKBUFF_DATA_USES_OFFSET
- skb->end = size;
off = nhead;
-#else
- skb->end = skb->head + size;
#endif
skb->tail += off;
skb_headers_offset_update(skb, nhead);
@@ -6159,11 +6158,7 @@ static int pskb_carve_inside_header(stru
skb->head = data;
skb->data = data;
skb->head_frag = 0;
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
- skb->end = size;
-#else
- skb->end = skb->head + size;
-#endif
+ skb_set_end_offset(skb, size);
skb_set_tail_pointer(skb, skb_headlen(skb));
skb_headers_offset_update(skb, 0);
skb->cloned = 0;
@@ -6301,11 +6296,7 @@ static int pskb_carve_inside_nonlinear(s
skb->head = data;
skb->head_frag = 0;
skb->data = data;
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
- skb->end = size;
-#else
- skb->end = skb->head + size;
-#endif
+ skb_set_end_offset(skb, size);
skb_reset_tail_pointer(skb);
skb_headers_offset_update(skb, 0);
skb->cloned = 0;
From: Jaegeuk Kim <[email protected]>
[ Upstream commit 98237fcda4a24e67b0a4498c17d5aa4ad4537bc7 ]
[14696.634553] task:cat state:D stack: 0 pid:1613738 ppid:1613735 flags:0x00000004
[14696.638285] Call Trace:
[14696.639038] <TASK>
[14696.640032] __schedule+0x302/0x930
[14696.640969] schedule+0x58/0xd0
[14696.641799] schedule_preempt_disabled+0x18/0x30
[14696.642890] __mutex_lock.constprop.0+0x2fb/0x4f0
[14696.644035] ? mod_objcg_state+0x10c/0x310
[14696.645040] ? obj_cgroup_charge+0xe1/0x170
[14696.646067] __mutex_lock_slowpath+0x13/0x20
[14696.647126] mutex_lock+0x34/0x40
[14696.648070] stat_show+0x25/0x17c0 [f2fs]
[14696.649218] seq_read_iter+0x120/0x4b0
[14696.650289] ? aa_file_perm+0x12a/0x500
[14696.651357] ? lru_cache_add+0x1c/0x20
[14696.652470] seq_read+0xfd/0x140
[14696.653445] full_proxy_read+0x5c/0x80
[14696.654535] vfs_read+0xa0/0x1a0
[14696.655497] ksys_read+0x67/0xe0
[14696.656502] __x64_sys_read+0x1a/0x20
[14696.657580] do_syscall_64+0x3b/0xc0
[14696.658671] entry_SYSCALL_64_after_hwframe+0x44/0xae
[14696.660068] RIP: 0033:0x7efe39df1cb2
[14696.661133] RSP: 002b:00007ffc8badd948 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[14696.662958] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007efe39df1cb2
[14696.664757] RDX: 0000000000020000 RSI: 00007efe399df000 RDI: 0000000000000003
[14696.666542] RBP: 00007efe399df000 R08: 00007efe399de010 R09: 00007efe399de010
[14696.668363] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000
[14696.670155] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[14696.671965] </TASK>
[14696.672826] task:umount state:D stack: 0 pid:1614985 ppid:1614984 flags:0x00004000
[14696.674930] Call Trace:
[14696.675903] <TASK>
[14696.676780] __schedule+0x302/0x930
[14696.677927] schedule+0x58/0xd0
[14696.679019] schedule_preempt_disabled+0x18/0x30
[14696.680412] __mutex_lock.constprop.0+0x2fb/0x4f0
[14696.681783] ? destroy_inode+0x65/0x80
[14696.683006] __mutex_lock_slowpath+0x13/0x20
[14696.684305] mutex_lock+0x34/0x40
[14696.685442] f2fs_destroy_stats+0x1e/0x60 [f2fs]
[14696.686803] f2fs_put_super+0x158/0x390 [f2fs]
[14696.688238] generic_shutdown_super+0x7a/0x120
[14696.689621] kill_block_super+0x27/0x50
[14696.690894] kill_f2fs_super+0x7f/0x100 [f2fs]
[14696.692311] deactivate_locked_super+0x35/0xa0
[14696.693698] deactivate_super+0x40/0x50
[14696.694985] cleanup_mnt+0x139/0x190
[14696.696209] __cleanup_mnt+0x12/0x20
[14696.697390] task_work_run+0x64/0xa0
[14696.698587] exit_to_user_mode_prepare+0x1b7/0x1c0
[14696.700053] syscall_exit_to_user_mode+0x27/0x50
[14696.701418] do_syscall_64+0x48/0xc0
[14696.702630] entry_SYSCALL_64_after_hwframe+0x44/0xae
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/debug.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c
index 07ad0d81f0c5..b449c7a372a4 100644
--- a/fs/f2fs/debug.c
+++ b/fs/f2fs/debug.c
@@ -21,7 +21,7 @@
#include "gc.h"
static LIST_HEAD(f2fs_stat_list);
-static DEFINE_MUTEX(f2fs_stat_mutex);
+static DEFINE_RAW_SPINLOCK(f2fs_stat_lock);
#ifdef CONFIG_DEBUG_FS
static struct dentry *f2fs_debugfs_root;
#endif
@@ -345,8 +345,9 @@ static int stat_show(struct seq_file *s, void *v)
{
struct f2fs_stat_info *si;
int i = 0, j = 0;
+ unsigned long flags;
- mutex_lock(&f2fs_stat_mutex);
+ raw_spin_lock_irqsave(&f2fs_stat_lock, flags);
list_for_each_entry(si, &f2fs_stat_list, stat_list) {
update_general_status(si->sbi);
@@ -574,7 +575,7 @@ static int stat_show(struct seq_file *s, void *v)
seq_printf(s, " - paged : %llu KB\n",
si->page_mem >> 10);
}
- mutex_unlock(&f2fs_stat_mutex);
+ raw_spin_unlock_irqrestore(&f2fs_stat_lock, flags);
return 0;
}
@@ -585,6 +586,7 @@ int f2fs_build_stats(struct f2fs_sb_info *sbi)
{
struct f2fs_super_block *raw_super = F2FS_RAW_SUPER(sbi);
struct f2fs_stat_info *si;
+ unsigned long flags;
int i;
si = f2fs_kzalloc(sbi, sizeof(struct f2fs_stat_info), GFP_KERNEL);
@@ -620,9 +622,9 @@ int f2fs_build_stats(struct f2fs_sb_info *sbi)
atomic_set(&sbi->max_aw_cnt, 0);
atomic_set(&sbi->max_vw_cnt, 0);
- mutex_lock(&f2fs_stat_mutex);
+ raw_spin_lock_irqsave(&f2fs_stat_lock, flags);
list_add_tail(&si->stat_list, &f2fs_stat_list);
- mutex_unlock(&f2fs_stat_mutex);
+ raw_spin_unlock_irqrestore(&f2fs_stat_lock, flags);
return 0;
}
@@ -630,10 +632,11 @@ int f2fs_build_stats(struct f2fs_sb_info *sbi)
void f2fs_destroy_stats(struct f2fs_sb_info *sbi)
{
struct f2fs_stat_info *si = F2FS_STAT(sbi);
+ unsigned long flags;
- mutex_lock(&f2fs_stat_mutex);
+ raw_spin_lock_irqsave(&f2fs_stat_lock, flags);
list_del(&si->stat_list);
- mutex_unlock(&f2fs_stat_mutex);
+ raw_spin_unlock_irqrestore(&f2fs_stat_lock, flags);
kfree(si);
}
--
2.34.1
From: Sondhauß, Jan <[email protected]>
[ Upstream commit 2844e2434385819f674d1fb4130c308c50ba681e ]
cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync
when successful.
pm_runtime_get_sync returns -error code on failure and 0 on successful
resume but also 1 when the device is already active. So the common case
for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls
to pm_runtime_put in the call-chain so that pm_runtime_put is called
one too many times and as result leaving the cpsw dev behind suspended.
The suspended cpsw dev leads to an access violation later on by
different parts of the cpsw driver.
Fix this by calling the return-friendly pm_runtime_resume_and_get
function.
Fixes: d43c65b05b84 ("ethtool: runtime-resume netdev parent in ethnl_ops_begin")
Signed-off-by: Jan Sondhauss <[email protected]>
Reviewed-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ti/cpsw_ethtool.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw_ethtool.c b/drivers/net/ethernet/ti/cpsw_ethtool.c
index 158c8d3793f4..b5bae6324970 100644
--- a/drivers/net/ethernet/ti/cpsw_ethtool.c
+++ b/drivers/net/ethernet/ti/cpsw_ethtool.c
@@ -364,11 +364,9 @@ int cpsw_ethtool_op_begin(struct net_device *ndev)
struct cpsw_common *cpsw = priv->cpsw;
int ret;
- ret = pm_runtime_get_sync(cpsw->dev);
- if (ret < 0) {
+ ret = pm_runtime_resume_and_get(cpsw->dev);
+ if (ret < 0)
cpsw_err(priv, drv, "ethtool begin failed %d\n", ret);
- pm_runtime_put_noidle(cpsw->dev);
- }
return ret;
}
--
2.34.1
From: Hengqi Chen <[email protected]>
commit 58617014405ad5c9f94f464444f4972dabb71ca7 upstream.
Fix the descriptions of the return values of helper bpf_current_task_under_cgroup().
Fixes: c6b5fb8690fa ("bpf: add documentation for eBPF helpers (42-50)")
Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/bpf.h | 4 ++--
tools/include/uapi/linux/bpf.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -2276,8 +2276,8 @@ union bpf_attr {
* Return
* The return value depends on the result of the test, and can be:
*
- * * 0, if current task belongs to the cgroup2.
- * * 1, if current task does not belong to the cgroup2.
+ * * 1, if current task belongs to the cgroup2.
+ * * 0, if current task does not belong to the cgroup2.
* * A negative error code, if an error occurred.
*
* long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -2276,8 +2276,8 @@ union bpf_attr {
* Return
* The return value depends on the result of the test, and can be:
*
- * * 0, if current task belongs to the cgroup2.
- * * 1, if current task does not belong to the cgroup2.
+ * * 1, if current task belongs to the cgroup2.
+ * * 0, if current task does not belong to the cgroup2.
* * A negative error code, if an error occurred.
*
* long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
From: Mirela Rabulea <[email protected]>
[ Upstream commit 417591a766b3c040c346044541ff949c0b2bb7b2 ]
If the application queues an NV12M jpeg as output buffer, but then
queues a single planar capture buffer, the kernel will crash with
"Unable to handle kernel NULL pointer dereference" in mxc_jpeg_addrs,
prevent this by finishing the job with error.
Signed-off-by: Mirela Rabulea <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/imx-jpeg/mxc-jpeg.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/media/platform/imx-jpeg/mxc-jpeg.c b/drivers/media/platform/imx-jpeg/mxc-jpeg.c
index fc905ea78b17..637d73f5f4a2 100644
--- a/drivers/media/platform/imx-jpeg/mxc-jpeg.c
+++ b/drivers/media/platform/imx-jpeg/mxc-jpeg.c
@@ -925,6 +925,12 @@ static void mxc_jpeg_device_run(void *priv)
v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, true);
jpeg_src_buf = vb2_to_mxc_buf(&src_buf->vb2_buf);
+ if (q_data_cap->fmt->colplanes != dst_buf->vb2_buf.num_planes) {
+ dev_err(dev, "Capture format %s has %d planes, but capture buffer has %d planes\n",
+ q_data_cap->fmt->name, q_data_cap->fmt->colplanes,
+ dst_buf->vb2_buf.num_planes);
+ jpeg_src_buf->jpeg_parse_error = true;
+ }
if (jpeg_src_buf->jpeg_parse_error) {
jpeg->slot_data[ctx->slot].used = false;
v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
--
2.34.1
From: Michael Straube <[email protected]>
[ Upstream commit 39850edf2befe27bcb3d6c37b6ee76d2ee4df903 ]
In function load_firmware() release_firmware() is not called if the
allocation of pFirmware->szFwBuffer fails or if fw->size is greater
than FW_8188E_SIZE.
Move the call to release_firmware() to the exit label at the end of
the function to fix this.
Fixes: 8cd574e6af54 ("staging: r8188eu: introduce new hal dir for RTL8188eu driver")
Signed-off-by: Michael Straube <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/r8188eu/hal/rtl8188e_hal_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index a677b2049ef3..9f2b86f9b660 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -572,10 +572,10 @@ static int load_firmware(struct rt_firmware *pFirmware, struct device *device)
}
memcpy(pFirmware->szFwBuffer, fw->data, fw->size);
pFirmware->ulFwLength = fw->size;
- release_firmware(fw);
dev_dbg(device, "!bUsedWoWLANFw, FmrmwareLen:%d+\n", pFirmware->ulFwLength);
Exit:
+ release_firmware(fw);
return rtStatus;
}
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit dc37dc617fabfb1c3a16d49f5d8cc20e9e3608ca ]
On ppc64le architecture __s64 is long int and requires %ld. Cast to
ssize_t and use %zd to avoid architecture-specific specifiers.
Fixes: 4172843ed4a3 ("libbpf: Fix signedness bug in btf_dump_array_data()")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf_dump.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index c1182dd94677..463447a071d6 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -1837,7 +1837,8 @@ static int btf_dump_array_data(struct btf_dump *d,
elem_type = skip_mods_and_typedefs(d->btf, elem_type_id, NULL);
elem_size = btf__resolve_size(d->btf, elem_type_id);
if (elem_size <= 0) {
- pr_warn("unexpected elem size %lld for array type [%u]\n", elem_size, id);
+ pr_warn("unexpected elem size %zd for array type [%u]\n",
+ (ssize_t)elem_size, id);
return -EINVAL;
}
--
2.34.1
From: Eric Dumazet <[email protected]>
commit 2b88cba55883eaafbc9b7cbff0b2c7cdba71ed01 upstream.
syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len)
in skb_try_coalesce() [1]
I was able to root cause the issue to kfence.
When kfence is in action, the following assertion is no longer true:
int size = xxxx;
void *ptr1 = kmalloc(size, gfp);
void *ptr2 = kmalloc(size, gfp);
if (ptr1 && ptr2)
ASSERT(ksize(ptr1) == ksize(ptr2));
We attempted to fix these issues in the blamed commits, but forgot
that TCP was possibly shifting data after skb_unclone_keeptruesize()
has been used, notably from tcp_retrans_try_collapse().
So we not only need to keep same skb->truesize value,
we also need to make sure TCP wont fill new tailroom
that pskb_expand_head() was able to get from a
addr = kmalloc(...) followed by ksize(addr)
Split skb_unclone_keeptruesize() into two parts:
1) Inline skb_unclone_keeptruesize() for the common case,
when skb is not cloned.
2) Out of line __skb_unclone_keeptruesize() for the 'slow path'.
WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295
Modules linked in:
CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295
Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa
RSP: 0018:ffffc900063af268 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000
RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003
RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000
R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8
R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155
FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline]
tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630
tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914
tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025
tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947
tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719
sk_backlog_rcv include/net/sock.h:1037 [inline]
__release_sock+0x134/0x3b0 net/core/sock.c:2779
release_sock+0x54/0x1b0 net/core/sock.c:3311
sk_wait_data+0x177/0x450 net/core/sock.c:2821
tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457
tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572
inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
sock_recvmsg net/socket.c:962 [inline]
____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
___sys_recvmsg+0x127/0x200 net/socket.c:2674
__sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: c4777efa751d ("net: add and use skb_unclone_keeptruesize() helper")
Fixes: 097b9146c0e2 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Marco Elver <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/skbuff.h | 18 +++++++++---------
net/core/skbuff.c | 32 ++++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+), 9 deletions(-)
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1684,19 +1684,19 @@ static inline int skb_unclone(struct sk_
return 0;
}
-/* This variant of skb_unclone() makes sure skb->truesize is not changed */
+/* This variant of skb_unclone() makes sure skb->truesize
+ * and skb_end_offset() are not changed, whenever a new skb->head is needed.
+ *
+ * Indeed there is no guarantee that ksize(kmalloc(X)) == ksize(kmalloc(X))
+ * when various debugging features are in place.
+ */
+int __skb_unclone_keeptruesize(struct sk_buff *skb, gfp_t pri);
static inline int skb_unclone_keeptruesize(struct sk_buff *skb, gfp_t pri)
{
might_sleep_if(gfpflags_allow_blocking(pri));
- if (skb_cloned(skb)) {
- unsigned int save = skb->truesize;
- int res;
-
- res = pskb_expand_head(skb, 0, 0, pri);
- skb->truesize = save;
- return res;
- }
+ if (skb_cloned(skb))
+ return __skb_unclone_keeptruesize(skb, pri);
return 0;
}
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1789,6 +1789,38 @@ struct sk_buff *skb_realloc_headroom(str
}
EXPORT_SYMBOL(skb_realloc_headroom);
+int __skb_unclone_keeptruesize(struct sk_buff *skb, gfp_t pri)
+{
+ unsigned int saved_end_offset, saved_truesize;
+ struct skb_shared_info *shinfo;
+ int res;
+
+ saved_end_offset = skb_end_offset(skb);
+ saved_truesize = skb->truesize;
+
+ res = pskb_expand_head(skb, 0, 0, pri);
+ if (res)
+ return res;
+
+ skb->truesize = saved_truesize;
+
+ if (likely(skb_end_offset(skb) == saved_end_offset))
+ return 0;
+
+ shinfo = skb_shinfo(skb);
+
+ /* We are about to change back skb->end,
+ * we need to move skb_shinfo() to its new location.
+ */
+ memmove(skb->head + saved_end_offset,
+ shinfo,
+ offsetof(struct skb_shared_info, frags[shinfo->nr_frags]));
+
+ skb_set_end_offset(skb, saved_end_offset);
+
+ return 0;
+}
+
/**
* skb_expand_head - reallocate header of &sk_buff
* @skb: buffer to reallocate
From: Vitaly Kuznetsov <[email protected]>
commit 47d3e5cdfe607ec6883eb0faa7acf05b8cb3f92a upstream.
It has been proven on practice that at least Windows Server 2019 tries
using HVCALL_SEND_IPI_EX in 'XMM fast' mode when it has more than 64 vCPUs
and it needs to send an IPI to a vCPU > 63. Similarly to other XMM Fast
hypercalls (HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}{,_EX}), this
information is missing in TLFS as of 6.0b. Currently, KVM returns an error
(HV_STATUS_INVALID_HYPERCALL_INPUT) and Windows crashes.
Note, HVCALL_SEND_IPI is a 'standard' fast hypercall (not 'XMM fast') as
all its parameters fit into RDX:R8 and this is handled by KVM correctly.
Cc: [email protected] # 5.14.x: 3244867af8c0: KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req
Cc: [email protected] # 5.14.x
Fixes: d8f5537a8816 ("KVM: hyper-v: Advertise support for fast XMM hypercalls")
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/hyperv.c | 52 ++++++++++++++++++++++++++++++++------------------
1 file changed, 34 insertions(+), 18 deletions(-)
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1889,6 +1889,7 @@ static u64 kvm_hv_send_ipi(struct kvm_vc
int sparse_banks_len;
u32 vector;
bool all_cpus;
+ int i;
if (hc->code == HVCALL_SEND_IPI) {
if (!hc->fast) {
@@ -1909,9 +1910,15 @@ static u64 kvm_hv_send_ipi(struct kvm_vc
trace_kvm_hv_send_ipi(vector, sparse_banks[0]);
} else {
- if (unlikely(kvm_read_guest(kvm, hc->ingpa, &send_ipi_ex,
- sizeof(send_ipi_ex))))
- return HV_STATUS_INVALID_HYPERCALL_INPUT;
+ if (!hc->fast) {
+ if (unlikely(kvm_read_guest(kvm, hc->ingpa, &send_ipi_ex,
+ sizeof(send_ipi_ex))))
+ return HV_STATUS_INVALID_HYPERCALL_INPUT;
+ } else {
+ send_ipi_ex.vector = (u32)hc->ingpa;
+ send_ipi_ex.vp_set.format = hc->outgpa;
+ send_ipi_ex.vp_set.valid_bank_mask = sse128_lo(hc->xmm[0]);
+ }
trace_kvm_hv_send_ipi_ex(send_ipi_ex.vector,
send_ipi_ex.vp_set.format,
@@ -1919,8 +1926,7 @@ static u64 kvm_hv_send_ipi(struct kvm_vc
vector = send_ipi_ex.vector;
valid_bank_mask = send_ipi_ex.vp_set.valid_bank_mask;
- sparse_banks_len = bitmap_weight(&valid_bank_mask, 64) *
- sizeof(sparse_banks[0]);
+ sparse_banks_len = bitmap_weight(&valid_bank_mask, 64);
all_cpus = send_ipi_ex.vp_set.format == HV_GENERIC_SET_ALL;
@@ -1930,12 +1936,27 @@ static u64 kvm_hv_send_ipi(struct kvm_vc
if (!sparse_banks_len)
goto ret_success;
- if (kvm_read_guest(kvm,
- hc->ingpa + offsetof(struct hv_send_ipi_ex,
- vp_set.bank_contents),
- sparse_banks,
- sparse_banks_len))
- return HV_STATUS_INVALID_HYPERCALL_INPUT;
+ if (!hc->fast) {
+ if (kvm_read_guest(kvm,
+ hc->ingpa + offsetof(struct hv_send_ipi_ex,
+ vp_set.bank_contents),
+ sparse_banks,
+ sparse_banks_len * sizeof(sparse_banks[0])))
+ return HV_STATUS_INVALID_HYPERCALL_INPUT;
+ } else {
+ /*
+ * The lower half of XMM0 is already consumed, each XMM holds
+ * two sparse banks.
+ */
+ if (sparse_banks_len > (2 * HV_HYPERCALL_MAX_XMM_REGISTERS - 1))
+ return HV_STATUS_INVALID_HYPERCALL_INPUT;
+ for (i = 0; i < sparse_banks_len; i++) {
+ if (i % 2)
+ sparse_banks[i] = sse128_lo(hc->xmm[(i + 1) / 2]);
+ else
+ sparse_banks[i] = sse128_hi(hc->xmm[i / 2]);
+ }
+ }
}
check_and_send_ipi:
@@ -2097,6 +2118,7 @@ static bool is_xmm_fast_hypercall(struct
case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE:
case HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX:
case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX:
+ case HVCALL_SEND_IPI_EX:
return true;
}
@@ -2264,14 +2286,8 @@ int kvm_hv_hypercall(struct kvm_vcpu *vc
ret = kvm_hv_flush_tlb(vcpu, &hc);
break;
case HVCALL_SEND_IPI:
- if (unlikely(hc.rep)) {
- ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
- break;
- }
- ret = kvm_hv_send_ipi(vcpu, &hc);
- break;
case HVCALL_SEND_IPI_EX:
- if (unlikely(hc.fast || hc.rep)) {
+ if (unlikely(hc.rep)) {
ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
break;
}
From: Brett Creeley <[email protected]>
[ Upstream commit b8fd0271dad00b953caaabe73474788d3d19e252 ]
It's possible the FW is already shutting down while the driver is being
removed and/or when the driver is going through reset. This can cause
unexpected/unnecessary errors to be printed:
eth0: DEV_CMD IONIC_CMD_PORT_RESET (12) error, IONIC_RC_ERROR (29) failed
eth1: DEV_CMD IONIC_CMD_RESET (3) error, IONIC_RC_ERROR (29) failed
Fix this by checking the FW status register before issuing the reset
commands.
Also, since err may not be assigned in ionic_port_reset(), assign it a
default value of 0, and remove an unnecessary log message.
Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/pensando/ionic/ionic_dev.c | 17 ++++++++++++-----
.../net/ethernet/pensando/ionic/ionic_dev.h | 1 +
.../net/ethernet/pensando/ionic/ionic_main.c | 18 ++++++++++--------
3 files changed, 23 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.c b/drivers/net/ethernet/pensando/ionic/ionic_dev.c
index 1b7730308d6a..b778d8264bca 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_dev.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.c
@@ -129,6 +129,16 @@ int ionic_dev_setup(struct ionic *ionic)
}
/* Devcmd Interface */
+bool ionic_is_fw_running(struct ionic_dev *idev)
+{
+ u8 fw_status = ioread8(&idev->dev_info_regs->fw_status);
+
+ /* firmware is useful only if the running bit is set and
+ * fw_status != 0xff (bad PCI read)
+ */
+ return (fw_status != 0xff) && (fw_status & IONIC_FW_STS_F_RUNNING);
+}
+
int ionic_heartbeat_check(struct ionic *ionic)
{
struct ionic_dev *idev = &ionic->idev;
@@ -152,13 +162,10 @@ int ionic_heartbeat_check(struct ionic *ionic)
goto do_check_time;
}
- /* firmware is useful only if the running bit is set and
- * fw_status != 0xff (bad PCI read)
- * If fw_status is not ready don't bother with the generation.
- */
fw_status = ioread8(&idev->dev_info_regs->fw_status);
- if (fw_status == 0xff || !(fw_status & IONIC_FW_STS_F_RUNNING)) {
+ /* If fw_status is not ready don't bother with the generation */
+ if (!ionic_is_fw_running(idev)) {
fw_status_ready = false;
} else {
fw_generation = fw_status & IONIC_FW_STS_F_GENERATION;
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.h b/drivers/net/ethernet/pensando/ionic/ionic_dev.h
index 8311086fb1f4..922bb6c9e01d 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_dev.h
+++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.h
@@ -357,5 +357,6 @@ void ionic_q_rewind(struct ionic_queue *q, struct ionic_desc_info *start);
void ionic_q_service(struct ionic_queue *q, struct ionic_cq_info *cq_info,
unsigned int stop_index);
int ionic_heartbeat_check(struct ionic *ionic);
+bool ionic_is_fw_running(struct ionic_dev *idev);
#endif /* _IONIC_DEV_H_ */
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_main.c b/drivers/net/ethernet/pensando/ionic/ionic_main.c
index f4af760cfa73..480f85bc17f9 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_main.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_main.c
@@ -488,6 +488,9 @@ int ionic_reset(struct ionic *ionic)
struct ionic_dev *idev = &ionic->idev;
int err;
+ if (!ionic_is_fw_running(idev))
+ return 0;
+
mutex_lock(&ionic->dev_cmd_lock);
ionic_dev_cmd_reset(idev);
err = ionic_dev_cmd_wait(ionic, DEVCMD_TIMEOUT);
@@ -560,15 +563,17 @@ int ionic_port_init(struct ionic *ionic)
int ionic_port_reset(struct ionic *ionic)
{
struct ionic_dev *idev = &ionic->idev;
- int err;
+ int err = 0;
if (!idev->port_info)
return 0;
- mutex_lock(&ionic->dev_cmd_lock);
- ionic_dev_cmd_port_reset(idev);
- err = ionic_dev_cmd_wait(ionic, DEVCMD_TIMEOUT);
- mutex_unlock(&ionic->dev_cmd_lock);
+ if (ionic_is_fw_running(idev)) {
+ mutex_lock(&ionic->dev_cmd_lock);
+ ionic_dev_cmd_port_reset(idev);
+ err = ionic_dev_cmd_wait(ionic, DEVCMD_TIMEOUT);
+ mutex_unlock(&ionic->dev_cmd_lock);
+ }
dma_free_coherent(ionic->dev, idev->port_info_sz,
idev->port_info, idev->port_info_pa);
@@ -576,9 +581,6 @@ int ionic_port_reset(struct ionic *ionic)
idev->port_info = NULL;
idev->port_info_pa = 0;
- if (err)
- dev_err(ionic->dev, "Failed to reset port\n");
-
return err;
}
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit 1d6736c3e162061dc811c76e605f35ef3234bffa ]
NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a
register-device-to-host-FIS response is expected for it.
However, for an IO_SUCCESS case, mpi_sata_completion() expects a
set-device-bits-FIS for any ata task with an use_ncq field true, which
includes NCQ NON DATA commands.
Fix this to correctly treat NCQ NON DATA commands as non-data by also
testing for the DMA_NONE DMA direction.
Link: https://lore.kernel.org/r/[email protected]
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 3 ++-
drivers/scsi/pm8001/pm80xx_hwi.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index e9c77c945752..d50eb22b2506 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2421,7 +2421,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
len = sizeof(struct pio_setup_fis);
pm8001_dbg(pm8001_ha, IO,
"PIO read len = %d\n", len);
- } else if (t->ata_task.use_ncq) {
+ } else if (t->ata_task.use_ncq &&
+ t->data_dir != DMA_NONE) {
len = sizeof(struct set_dev_bits_fis);
pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
len);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 043a2cc4d4de..3c2f2fbdb432 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2518,7 +2518,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
len = sizeof(struct pio_setup_fis);
pm8001_dbg(pm8001_ha, IO,
"PIO read len = %d\n", len);
- } else if (t->ata_task.use_ncq) {
+ } else if (t->ata_task.use_ncq &&
+ t->data_dir != DMA_NONE) {
len = sizeof(struct set_dev_bits_fis);
pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
len);
--
2.34.1
From: Dan Williams <[email protected]>
[ Upstream commit d621bc2e7282f9955033a6359877fd4ac4be60e1 ]
Fix a '\n' vs '/n' typo.
Fixes: 08422378c4ad ("cxl/pci: Add HDM decoder capabilities")
Acked-by: Ben Widawsky <[email protected]
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/164298418268.3018233.17790073375430834911.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cxl/core/regs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index 41de4a136ecd..b8aa583a7642 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -49,7 +49,7 @@ void cxl_probe_component_regs(struct device *dev, void __iomem *base,
if (FIELD_GET(CXL_CM_CAP_HDR_ID_MASK, cap_array) != CM_CAP_HDR_CAP_ID) {
dev_err(dev,
- "Couldn't locate the CXL.cache and CXL.mem capability array header./n");
+ "Couldn't locate the CXL.cache and CXL.mem capability array header.\n");
return;
}
--
2.34.1
From: Luca Weiss <[email protected]>
[ Upstream commit 4a8a77abf0e2b6468ba0281e33384cbec5fb476a ]
The fuse consists of 64 bits, with this statement we're supposed to get
the upper 32 bits but it actually read out of bounds and got 0 instead
of the desired value which lead to the "PVS bin not set." codepath being
run resetting our pvs value.
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Luca Weiss <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index d1744b5d9619..6dfa86971a75 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -130,7 +130,7 @@ static void get_krait_bin_format_b(struct device *cpu_dev,
}
/* Check PVS_BLOW_STATUS */
- pte_efuse = *(((u32 *)buf) + 4);
+ pte_efuse = *(((u32 *)buf) + 1);
pte_efuse &= BIT(21);
if (pte_efuse) {
dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
--
2.34.1
From: Codrin Ciubotariu <[email protected]>
[ Upstream commit 9a1e13440a4f2e7566fd4c5eae6a53e6400e08a4 ]
Even if struct snd_dmaengine_pcm_config is used, prepare_slave_config()
callback might not be set. Check if this callback is set before using it.
Fixes: fa654e085300 ("ASoC: dmaengine-pcm: Provide default config")
Signed-off-by: Codrin Ciubotariu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-generic-dmaengine-pcm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 4aa48c74f21a..38f3f36c1d72 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -82,10 +82,10 @@ static int dmaengine_pcm_hw_params(struct snd_soc_component *component,
memset(&slave_config, 0, sizeof(slave_config));
- if (!pcm->config)
- prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config;
- else
+ if (pcm->config && pcm->config->prepare_slave_config)
prepare_slave_config = pcm->config->prepare_slave_config;
+ else
+ prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config;
if (prepare_slave_config) {
int ret = prepare_slave_config(substream, params, &slave_config);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 7c442e76c06cb1bef16a6c523487438175584eea ]
rc_dev is allocated by rc_allocate_device(), and doesn't assigned to
ctx->rc_dev before calling rc_free_device(ctx->rc_dev).
So it should call rc_free_device(rc_dev);
Fixes: e25f1f7c94e1 ("drm/bridge/sii8620: add remote control support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/sil-sii8620.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index 843265d7f1b1..ec7745c31da0 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -2120,7 +2120,7 @@ static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
if (ret) {
dev_err(ctx->dev, "Failed to register RC device\n");
ctx->error = ret;
- rc_free_device(ctx->rc_dev);
+ rc_free_device(rc_dev);
return;
}
ctx->rc_dev = rc_dev;
--
2.34.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 9e04a0eda84fccab0ac22a33825ad53f47c968c7 ]
The second video-in channel on RZ/G1C has only 12 data lanes, but the
pin control driver uses the vin_data union, which is meant for 24 data
lanes, thus wasting space.
Fix this by using the vin_data12 union instead.
This reduces kernel size by 96 bytes.
Fixes: 50f3f2d73e3426ba ("pinctrl: sh-pfc: Reduce kernel size for narrow VIN channels")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/52716fa89139f6f92592633edb52804d4c5e18f0.1640269757.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/renesas/pfc-r8a77470.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/renesas/pfc-r8a77470.c b/drivers/pinctrl/renesas/pfc-r8a77470.c
index e6e5487691c1..cf7153d06a95 100644
--- a/drivers/pinctrl/renesas/pfc-r8a77470.c
+++ b/drivers/pinctrl/renesas/pfc-r8a77470.c
@@ -2140,7 +2140,7 @@ static const unsigned int vin0_clk_mux[] = {
VI0_CLK_MARK,
};
/* - VIN1 ------------------------------------------------------------------- */
-static const union vin_data vin1_data_pins = {
+static const union vin_data12 vin1_data_pins = {
.data12 = {
RCAR_GP_PIN(3, 1), RCAR_GP_PIN(3, 2),
RCAR_GP_PIN(3, 3), RCAR_GP_PIN(3, 4),
@@ -2150,7 +2150,7 @@ static const union vin_data vin1_data_pins = {
RCAR_GP_PIN(3, 15), RCAR_GP_PIN(3, 16),
},
};
-static const union vin_data vin1_data_mux = {
+static const union vin_data12 vin1_data_mux = {
.data12 = {
VI1_DATA0_MARK, VI1_DATA1_MARK,
VI1_DATA2_MARK, VI1_DATA3_MARK,
--
2.34.1
From: Abel Vesa <[email protected]>
[ Upstream commit eccac77ede3946c90143447cdc785dc16aec4b24 ]
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. The
CCGR121 belongs to ECSPI2 and it is not shared.
Fixes: 8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support")
Reported-by: David Wolfe <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx7d.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index c4e0f1c07192..3f6fd7ef2a68 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -849,7 +849,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
hws[IMX7D_WDOG4_ROOT_CLK] = imx_clk_hw_gate4("wdog4_root_clk", "wdog_post_div", base + 0x49f0, 0);
hws[IMX7D_KPP_ROOT_CLK] = imx_clk_hw_gate4("kpp_root_clk", "ipg_root_clk", base + 0x4aa0, 0);
hws[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_hw_gate4("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
- hws[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_hw_gate4("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
hws[IMX7D_WRCLK_ROOT_CLK] = imx_clk_hw_gate4("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
hws[IMX7D_USB_CTRL_CLK] = imx_clk_hw_gate4("usb_ctrl_clk", "ahb_root_clk", base + 0x4680, 0);
hws[IMX7D_USB_PHY1_CLK] = imx_clk_hw_gate4("usb_phy1_clk", "pll_usb1_main_clk", base + 0x46a0, 0);
--
2.34.1
From: Pavel Skripkin <[email protected]>
commit 136bed0bfd3bc9c95c88aafff2d22ecb3a919f23 upstream.
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.
Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.
Fail log:
| usb 5-1: BOGUS urb xfer, pipe 3 != type 1
| WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| Modules linked in:
| CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| Workqueue: usb_hub_wq hub_event
| RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| ...
| Call Trace:
| <TASK>
| mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
| mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
| usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
| call_driver_probe drivers/base/dd.c:517 [inline]
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/[email protected]
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Vincent Mailhol <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/mcba_usb.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -33,10 +33,6 @@
#define MCBA_USB_RX_BUFF_SIZE 64
#define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
-/* MCBA endpoint numbers */
-#define MCBA_USB_EP_IN 1
-#define MCBA_USB_EP_OUT 1
-
/* Microchip command id */
#define MBCA_CMD_RECEIVE_MESSAGE 0xE3
#define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5
@@ -84,6 +80,8 @@ struct mcba_priv {
atomic_t free_ctx_cnt;
void *rxbuf[MCBA_MAX_RX_URBS];
dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
+ int rx_pipe;
+ int tx_pipe;
};
/* CAN frame */
@@ -272,10 +270,8 @@ static netdev_tx_t mcba_usb_xmit(struct
memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE);
- usb_fill_bulk_urb(urb, priv->udev,
- usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf,
- MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback,
- ctx);
+ usb_fill_bulk_urb(urb, priv->udev, priv->tx_pipe, buf, MCBA_USB_TX_BUFF_SIZE,
+ mcba_usb_write_bulk_callback, ctx);
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
usb_anchor_urb(urb, &priv->tx_submitted);
@@ -610,7 +606,7 @@ static void mcba_usb_read_bulk_callback(
resubmit_urb:
usb_fill_bulk_urb(urb, priv->udev,
- usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT),
+ priv->rx_pipe,
urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE,
mcba_usb_read_bulk_callback, priv);
@@ -655,7 +651,7 @@ static int mcba_usb_start(struct mcba_pr
urb->transfer_dma = buf_dma;
usb_fill_bulk_urb(urb, priv->udev,
- usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
+ priv->rx_pipe,
buf, MCBA_USB_RX_BUFF_SIZE,
mcba_usb_read_bulk_callback, priv);
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -809,6 +805,13 @@ static int mcba_usb_probe(struct usb_int
struct mcba_priv *priv;
int err;
struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *in, *out;
+
+ err = usb_find_common_endpoints(intf->cur_altsetting, &in, &out, NULL, NULL);
+ if (err) {
+ dev_err(&intf->dev, "Can't find endpoints\n");
+ return err;
+ }
netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
if (!netdev) {
@@ -854,6 +857,9 @@ static int mcba_usb_probe(struct usb_int
goto cleanup_free_candev;
}
+ priv->rx_pipe = usb_rcvbulkpipe(priv->udev, in->bEndpointAddress);
+ priv->tx_pipe = usb_sndbulkpipe(priv->udev, out->bEndpointAddress);
+
devm_can_led_init(netdev);
/* Start USB dev only if we have successfully registered CAN device */
From: Luca Coelho <[email protected]>
[ Upstream commit 8a265d1a619c16400406c9d598411850ee104aed ]
We may not have all the interfaces added to the driver when we get the
THERMAL_DUAL_CHAIN_REQUEST notification from the FW, so instead of
iterating all vifs to update SMPS, iterate only the ones that are
already assigned. The interfaces that were not assigned yet, will be
updated accordingly when we start using them.
Signed-off-by: Luca Coelho <[email protected]>
Fixes: 2a7ce54ccc23 ("iwlwifi: mvm: honour firmware SMPS requests")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.9416aade2ba0.I0b71142f89e3f158aa058a1dfb2517c8c1fa3726@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
index 49c32a8132a0..c77d98c88811 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
@@ -238,7 +238,8 @@ static void iwl_mvm_rx_thermal_dual_chain_req(struct iwl_mvm *mvm,
*/
mvm->fw_static_smps_request =
req->event == cpu_to_le32(THERMAL_DUAL_CHAIN_REQ_DISABLE);
- ieee80211_iterate_interfaces(mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+ ieee80211_iterate_interfaces(mvm->hw,
+ IEEE80211_IFACE_SKIP_SDATA_NOT_IN_DRIVER,
iwl_mvm_intf_dual_chain_req, NULL);
}
--
2.34.1
From: John David Anglin <[email protected]>
[ Upstream commit e00b0a2ab8ec019c344e53bfc76e31c18bb587b7 ]
Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.
This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.
This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.
This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).
V2 adds flush and lpa instruction support to handle_nadtlb_fault.
Signed-off-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/include/asm/traps.h | 1 +
arch/parisc/kernel/traps.c | 2 +
arch/parisc/mm/fault.c | 89 +++++++++++++++++++++++++++++++++
3 files changed, 92 insertions(+)
diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h
index 8ecc1f0c0483..d0e090a2c000 100644
--- a/arch/parisc/include/asm/traps.h
+++ b/arch/parisc/include/asm/traps.h
@@ -17,6 +17,7 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err);
const char *trap_name(unsigned long code);
void do_page_fault(struct pt_regs *regs, unsigned long code,
unsigned long address);
+int handle_nadtlb_fault(struct pt_regs *regs);
#endif
#endif
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index afe8b902a8fc..6fe5a3e98edc 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -661,6 +661,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
by hand. Technically we need to emulate:
fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw
*/
+ if (code == 17 && handle_nadtlb_fault(regs))
+ return;
fault_address = regs->ior;
fault_space = regs->isr;
break;
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 716960f5d92e..5faa3cff4738 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -424,3 +424,92 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
goto no_context;
pagefault_out_of_memory();
}
+
+/* Handle non-access data TLB miss faults.
+ *
+ * For probe instructions, accesses to userspace are considered allowed
+ * if they lie in a valid VMA and the access type matches. We are not
+ * allowed to handle MM faults here so there may be situations where an
+ * actual access would fail even though a probe was successful.
+ */
+int
+handle_nadtlb_fault(struct pt_regs *regs)
+{
+ unsigned long insn = regs->iir;
+ int breg, treg, xreg, val = 0;
+ struct vm_area_struct *vma, *prev_vma;
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ unsigned long address;
+ unsigned long acc_type;
+
+ switch (insn & 0x380) {
+ case 0x280:
+ /* FDC instruction */
+ fallthrough;
+ case 0x380:
+ /* PDC and FIC instructions */
+ if (printk_ratelimit()) {
+ pr_warn("BUG: nullifying cache flush/purge instruction\n");
+ show_regs(regs);
+ }
+ if (insn & 0x20) {
+ /* Base modification */
+ breg = (insn >> 21) & 0x1f;
+ xreg = (insn >> 16) & 0x1f;
+ if (breg && xreg)
+ regs->gr[breg] += regs->gr[xreg];
+ }
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ case 0x180:
+ /* PROBE instruction */
+ treg = insn & 0x1f;
+ if (regs->isr) {
+ tsk = current;
+ mm = tsk->mm;
+ if (mm) {
+ /* Search for VMA */
+ address = regs->ior;
+ mmap_read_lock(mm);
+ vma = find_vma_prev(mm, address, &prev_vma);
+ mmap_read_unlock(mm);
+
+ /*
+ * Check if access to the VMA is okay.
+ * We don't allow for stack expansion.
+ */
+ acc_type = (insn & 0x40) ? VM_WRITE : VM_READ;
+ if (vma
+ && address >= vma->vm_start
+ && (vma->vm_flags & acc_type) == acc_type)
+ val = 1;
+ }
+ }
+ if (treg)
+ regs->gr[treg] = val;
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ case 0x300:
+ /* LPA instruction */
+ if (insn & 0x20) {
+ /* Base modification */
+ breg = (insn >> 21) & 0x1f;
+ xreg = (insn >> 16) & 0x1f;
+ if (breg && xreg)
+ regs->gr[breg] += regs->gr[xreg];
+ }
+ treg = insn & 0x1f;
+ if (treg)
+ regs->gr[treg] = 0;
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 75478b3b393bcbdca4e6da76fe3a9f1a4133ec5d ]
The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.
This specification, in its section 6.2.4, indeed states:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is not permitted for any Deep Color mode.
This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is also 36-bit mode but does not require the further use
of the Deep Color modes described in section 6.5.2 and 6.5.3.
This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.
This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.
Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()
Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_edid.c | 8 --------
1 file changed, 8 deletions(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5033,16 +5033,8 @@ static void drm_parse_hdmi_deep_color_in
connector->name, dc_bpc);
info->bpc = dc_bpc;
- /*
- * Deep color support mandates RGB444 support for all video
- * modes and forbids YCRCB422 support for all video modes per
- * HDMI 1.3 spec.
- */
- info->color_formats = DRM_COLOR_FORMAT_RGB444;
-
/* YCRCB444 is optional according to spec. */
if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
- info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
DRM_DEBUG("%s: HDMI sink does YCRCB444 in deep color.\n",
connector->name);
}
From: Jonathan Neuschäfer <[email protected]>
[ Upstream commit 113b261bdf2b4fd34e7769a147a7acd0a4d9137f ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes: 6c81966107dc0 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/hisilicon/clk-hi3559a.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/hisilicon/clk-hi3559a.c b/drivers/clk/hisilicon/clk-hi3559a.c
index 56012a3d0219..9ea1a80acbe8 100644
--- a/drivers/clk/hisilicon/clk-hi3559a.c
+++ b/drivers/clk/hisilicon/clk-hi3559a.c
@@ -611,8 +611,8 @@ static struct hisi_mux_clock hi3559av100_shub_mux_clks[] = {
/* shub div clk */
-static struct clk_div_table shub_spi_clk_table[] = {{0, 8}, {1, 4}, {2, 2}};
-static struct clk_div_table shub_uart_div_clk_table[] = {{1, 8}, {2, 4}};
+static struct clk_div_table shub_spi_clk_table[] = {{0, 8}, {1, 4}, {2, 2}, {/*sentinel*/}};
+static struct clk_div_table shub_uart_div_clk_table[] = {{1, 8}, {2, 4}, {/*sentinel*/}};
static struct hisi_divider_clock hi3559av100_shub_div_clks[] = {
{ HI3559AV100_SHUB_SPI_SOURCE_CLK, "clk_spi_clk", "shub_clk", 0, 0x20, 24, 2,
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 127efdbc51fe6064336c0452ce9c910b3e107cf0 ]
The dummy_ptr check in hmm_init() [1] results in the following
"hmm_init Failed to create sysfs" error exactly once every
two times on atomisp reload by rmmod/insmod (although atomisp module
loads and works fine regardless of this error):
[ 140.230662] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/active_bo'
[ 140.230668] CPU: 1 PID: 2502 Comm: insmod Tainted: G C OE 5.15.0-rc4-1-surface-mainline #1 b8acf6eb64994414b2e20bad312a7a2c45f748f9
[ 140.230675] Hardware name: OEMB OEMB/OEMB, BIOS 1.51116.238 03/09/2015
[ 140.230678] Call Trace:
[ 140.230687] dump_stack_lvl+0x46/0x5a
[ 140.230702] sysfs_warn_dup.cold+0x17/0x24
[ 140.230710] sysfs_add_file_mode_ns+0x160/0x170
[ 140.230717] internal_create_group+0x126/0x390
[ 140.230723] hmm_init+0x5c/0x70 [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99]
[ 140.230811] atomisp_pci_probe.cold+0x1136/0x148e [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99]
[ 140.230875] local_pci_probe+0x45/0x80
[ 140.230882] ? pci_match_device+0xd7/0x130
[ 140.230887] pci_device_probe+0xfa/0x1b0
[ 140.230892] really_probe+0x1f5/0x3f0
[ 140.230899] __driver_probe_device+0xfe/0x180
[ 140.230903] driver_probe_device+0x1e/0x90
[ 140.230908] __driver_attach+0xc0/0x1c0
[ 140.230912] ? __device_attach_driver+0xe0/0xe0
[ 140.230915] ? __device_attach_driver+0xe0/0xe0
[ 140.230919] bus_for_each_dev+0x89/0xd0
[ 140.230924] bus_add_driver+0x12b/0x1e0
[ 140.230929] driver_register+0x8f/0xe0
[ 140.230933] ? 0xffffffffc153f000
[ 140.230937] do_one_initcall+0x57/0x220
[ 140.230945] do_init_module+0x5c/0x260
[ 140.230952] load_module+0x24bd/0x26a0
[ 140.230962] ? __do_sys_finit_module+0xae/0x110
[ 140.230966] __do_sys_finit_module+0xae/0x110
[ 140.230972] do_syscall_64+0x5c/0x80
[ 140.230979] ? syscall_exit_to_user_mode+0x23/0x40
[ 140.230983] ? do_syscall_64+0x69/0x80
[ 140.230988] ? exc_page_fault+0x72/0x170
[ 140.230991] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 140.230997] RIP: 0033:0x7f7fd5d8718d
[ 140.231003] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
[ 140.231006] RSP: 002b:00007ffefc25f0e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 140.231012] RAX: ffffffffffffffda RBX: 000055ac3edcd7f0 RCX: 00007f7fd5d8718d
[ 140.231015] RDX: 0000000000000000 RSI: 000055ac3d723270 RDI: 0000000000000003
[ 140.231017] RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f7fd5e52380
[ 140.231019] R10: 0000000000000003 R11: 0000000000000246 R12: 000055ac3d723270
[ 140.231021] R13: 0000000000000000 R14: 000055ac3edd06e0 R15: 0000000000000000
[ 140.231038] atomisp-isp2 0000:00:03.0: hmm_init Failed to create sysfs
The problem is that dummy_ptr == 0 is a valid value. So, change the logic
which checks if dummy_ptr was allocated.
At this point, atomisp now gives WARN_ON() in hmm_free() [2] on atomisp
reload by rmmod/insmod. Again, the check is wrong there.
So, change both checks for mmgr_EXCEPTION, which is the error value when
HMM allocation fails, and initialize dummy_ptr with such value.
[1] added on commit
d9ab83953fa7 ("media: atomisp: don't cause a warn if probe failed")
[2] added on commit
b83cc378dfc4 ("atomisp: clean up the hmm init/cleanup indirections")
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Tsuchiya Yuto <[email protected]>
Co-developed-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/hmm/hmm.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/hmm/hmm.c b/drivers/staging/media/atomisp/pci/hmm/hmm.c
index 6a5ee4607089..c1cda16f2dc0 100644
--- a/drivers/staging/media/atomisp/pci/hmm/hmm.c
+++ b/drivers/staging/media/atomisp/pci/hmm/hmm.c
@@ -39,7 +39,7 @@
struct hmm_bo_device bo_device;
struct hmm_pool dynamic_pool;
struct hmm_pool reserved_pool;
-static ia_css_ptr dummy_ptr;
+static ia_css_ptr dummy_ptr = mmgr_EXCEPTION;
static bool hmm_initialized;
struct _hmm_mem_stat hmm_mem_stat;
@@ -209,7 +209,7 @@ int hmm_init(void)
void hmm_cleanup(void)
{
- if (!dummy_ptr)
+ if (dummy_ptr == mmgr_EXCEPTION)
return;
sysfs_remove_group(&atomisp_dev->kobj, atomisp_attribute_group);
@@ -288,7 +288,8 @@ void hmm_free(ia_css_ptr virt)
dev_dbg(atomisp_dev, "%s: free 0x%08x\n", __func__, virt);
- WARN_ON(!virt);
+ if (WARN_ON(virt == mmgr_EXCEPTION))
+ return;
bo = hmm_bo_device_search_start(&bo_device, (unsigned int)virt);
--
2.34.1
From: Randy Dunlap <[email protected]>
commit f9512d654f62604664251dedd437a22fe484974a upstream.
Fix build errors when BRIDGE=m and SPARX5_SWITCH=y:
riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L305':
sparx5_switchdev.c:(.text+0xdb0): undefined reference to `br_vlan_enabled'
riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L283':
sparx5_switchdev.c:(.text+0xee0): undefined reference to `br_vlan_enabled'
Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Horatiu Vultur <[email protected]>
Cc: Lars Povlsen <[email protected]>
Cc: Steen Hegelund <[email protected]>
Cc: [email protected]
Cc: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/microchip/sparx5/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/microchip/sparx5/Kconfig
+++ b/drivers/net/ethernet/microchip/sparx5/Kconfig
@@ -5,6 +5,7 @@ config SPARX5_SWITCH
depends on OF
depends on ARCH_SPARX5 || COMPILE_TEST
depends on PTP_1588_CLOCK_OPTIONAL
+ depends on BRIDGE || BRIDGE=n
select PHYLINK
select PHY_SPARX5_SERDES
select RESET_CONTROLLER
From: Miaoqian Lin <[email protected]>
[ Upstream commit 740dc3e846537c3743da98bf106f376023fd085c ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: fdbcb3cba54b ("ASoC: atmel: machine driver for at91sam9x5-wm8731 boards")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Codrin Ciubotariu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/atmel/sam9x5_wm8731.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c
index 7745250fd743..529604a06c53 100644
--- a/sound/soc/atmel/sam9x5_wm8731.c
+++ b/sound/soc/atmel/sam9x5_wm8731.c
@@ -142,7 +142,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
if (!cpu_np) {
dev_err(&pdev->dev, "atmel,ssc-controller node missing\n");
ret = -EINVAL;
- goto out;
+ goto out_put_codec_np;
}
dai->cpus->of_node = cpu_np;
dai->platforms->of_node = cpu_np;
@@ -153,12 +153,9 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
if (ret != 0) {
dev_err(&pdev->dev, "Failed to set SSC %d for audio: %d\n",
ret, priv->ssc_id);
- goto out;
+ goto out_put_cpu_np;
}
- of_node_put(codec_np);
- of_node_put(cpu_np);
-
ret = devm_snd_soc_register_card(&pdev->dev, card);
if (ret) {
dev_err(&pdev->dev, "Platform device allocation failed\n");
@@ -167,10 +164,14 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "%s ok\n", __func__);
- return ret;
+ goto out_put_cpu_np;
out_put_audio:
atmel_ssc_put_audio(priv->ssc_id);
+out_put_cpu_np:
+ of_node_put(cpu_np);
+out_put_codec_np:
+ of_node_put(codec_np);
out:
return ret;
}
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 53819a0d97aace1425bb042829e3446952a9e8a9 ]
__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.
Link: lore.kernel.org/r/[email protected]
Fixes: 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()")
Cc: Jingoo Han <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Julian Wiedmann <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: [email protected]
Reported-by: Igor Zhbanov <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/hvc/hvc_iucv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index 82a76cac94de..32366caca662 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -1417,7 +1417,9 @@ static int __init hvc_iucv_init(void)
*/
static int __init hvc_iucv_config(char *val)
{
- return kstrtoul(val, 10, &hvc_iucv_devices);
+ if (kstrtoul(val, 10, &hvc_iucv_devices))
+ pr_warn("hvc_iucv= invalid parameter value '%s'\n", val);
+ return 1;
}
--
2.34.1
From: Horatiu Vultur <[email protected]>
commit a6ff90f3fbd4d902aad8777f0329cef3a2768bde upstream.
The blamed commit adds support for irq, but the reqisters for irq are
outside of the memory size. They are at address 0x108. Therefore update
the memory size to cover all the registers used by the device.
Fixes: 01a9350bdd49fb ("dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support")
Signed-off-by: Horatiu Vultur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -138,7 +138,7 @@ examples:
clocks = <&sys_clk>;
pinctrl-0 = <&sgpio2_pins>;
pinctrl-names = "default";
- reg = <0x1101059c 0x100>;
+ reg = <0x1101059c 0x118>;
microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
bus-frequency = <25000000>;
sgpio_in2: gpio@0 {
From: Anders Roxell <[email protected]>
commit 8219d31effa7be5dbc7ff915d7970672e028c701 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:10576: Error: unrecognized opcode: `stbcx.'
{standard input}:10680: Error: unrecognized opcode: `lharx'
{standard input}:10694: Error: unrecognized opcode: `lbarx'
Rework to add assembler directives [1] around the instruction. The
problem with this might be that we can trick a power6 into
single-stepping through an stbcx. for instance, and it will execute that
in kernel mode.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: [email protected] # v4.14+
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Segher Boessenkool <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/sstep.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -1014,7 +1014,10 @@ NOKPROBE_SYMBOL(emulate_dcbz);
#define __put_user_asmx(x, addr, err, op, cr) \
__asm__ __volatile__( \
+ ".machine push\n" \
+ ".machine power8\n" \
"1: " op " %2,0,%3\n" \
+ ".machine pop\n" \
" mfcr %1\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
@@ -1027,7 +1030,10 @@ NOKPROBE_SYMBOL(emulate_dcbz);
#define __get_user_asmx(x, addr, err, op) \
__asm__ __volatile__( \
+ ".machine push\n" \
+ ".machine power8\n" \
"1: "op" %1,0,%2\n" \
+ ".machine pop\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3: li %0,%3\n" \
From: Ranjani Sridharan <[email protected]>
[ Upstream commit 2ce0d008dcc59f9c01f43277b9f9743af7b01dad ]
The limitation to assign a link DMA channel for a BE iff the
corresponding host DMA channel is assigned to a connected FE is only
applicable if the PROCEN_FMT_QUIRK is set. So, remove it for platforms
that do not enable the quirk.
Complements: a792bfc1c2bc ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround")
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/hda-dai.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c
index 6704dbcd101c..d15ca2564dbe 100644
--- a/sound/soc/sof/intel/hda-dai.c
+++ b/sound/soc/sof/intel/hda-dai.c
@@ -58,6 +58,8 @@ static struct hdac_ext_stream *
{
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
struct sof_intel_hda_stream *hda_stream;
+ const struct sof_intel_dsp_desc *chip;
+ struct snd_sof_dev *sdev;
struct hdac_ext_stream *res = NULL;
struct hdac_stream *stream = NULL;
@@ -76,9 +78,20 @@ static struct hdac_ext_stream *
continue;
hda_stream = hstream_to_sof_hda_stream(hstream);
+ sdev = hda_stream->sdev;
+ chip = get_chip_info(sdev->pdata);
/* check if link is available */
if (!hstream->link_locked) {
+ /*
+ * choose the first available link for platforms that do not have the
+ * PROCEN_FMT_QUIRK set.
+ */
+ if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) {
+ res = hstream;
+ break;
+ }
+
if (stream->opened) {
/*
* check if the stream tag matches the stream
--
2.34.1
From: Petr Machata <[email protected]>
[ Upstream commit 0caf6d9922192dd1afa8dc2131abfb4df1443b9f ]
When a netlink message is received, netlink_recvmsg() fills in the address
of the sender. One of the fields is the 32-bit bitfield nl_groups, which
carries the multicast group on which the message was received. The least
significant bit corresponds to group 1, and therefore the highest group
that the field can represent is 32. Above that, the UB sanitizer flags the
out-of-bounds shift attempts.
Which bits end up being set in such case is implementation defined, but
it's either going to be a wrong non-zero value, or zero, which is at least
not misleading. Make the latter choice deterministic by always setting to 0
for higher-numbered multicast groups.
To get information about membership in groups >= 32, userspace is expected
to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO
socket option.
[0] https://lwn.net/Articles/147608/
The way to trigger this issue is e.g. through monitoring the BRVLAN group:
# bridge monitor vlan &
# ip link add name br type bridge
Which produces the following citation:
UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19
shift exponent 32 is too large for 32-bit type 'int'
Fixes: f7fa9b10edbb ("[NETLINK]: Support dynamic number of multicast groups per netlink family")
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/2bef6aabf201d1fc16cca139a744700cff9dcb04.1647527635.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netlink/af_netlink.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 81ba8e51e01f..83ca93b32f5f 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -157,6 +157,8 @@ EXPORT_SYMBOL(do_trace_netlink_extack);
static inline u32 netlink_group_mask(u32 group)
{
+ if (group > 32)
+ return 0;
return group ? 1 << (group - 1) : 0;
}
--
2.34.1
From: Miquel Raynal <[email protected]>
commit 90c204d3195a795f77f5bce767e311dd1c59ca17 upstream.
The interrupt property is not mandatory at all, this property should not
be part of the required properties list, so move it into the optional
properties list.
Fixes: 326e5c8d4a87 ("dt-binding: spi: Document Macronix controller bindings")
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/spi/spi-mxic.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
- reg: should contain 2 entries, one for the registers and one for the direct
mapping area
- reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
- clocks: should contain 3 entries for the "ps_clk", "send_clk" and
"send_dly_clk" clocks
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
Example:
spi@43c30000 {
From: Robert Hancock <[email protected]>
[ Upstream commit 1d366c2f9df8279df2adbb60471f86fc40a1c39e ]
This driver is for an FPGA logic core, so there can be arbitrarily many
instances of the bus on a given system. Previously all of the I2C bus
names were "xiic-i2c" which caused issues with lm_sensors when trying to
map human-readable names to sensor inputs because it could not properly
distinguish the busses, for example. Append the platform device name to
the I2C bus name so it is unique between different instances.
Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <[email protected]>
Tested-by: Michal Simek <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-xiic.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index bb93db98404e..612343771ce2 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -756,7 +756,6 @@ static const struct i2c_adapter_quirks xiic_quirks = {
static const struct i2c_adapter xiic_adapter = {
.owner = THIS_MODULE,
- .name = DRIVER_NAME,
.class = I2C_CLASS_DEPRECATED,
.algo = &xiic_algorithm,
.quirks = &xiic_quirks,
@@ -793,6 +792,8 @@ static int xiic_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &pdev->dev;
i2c->adap.dev.of_node = pdev->dev.of_node;
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+ DRIVER_NAME " %s", pdev->name);
mutex_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit 524bb1da785a7ae43dd413cd392b5071c6c367f8 ]
The function device_pm_check_callbacks() can be called under the spin
lock (in the reported case it happens from genpd_add_device() ->
dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes.
However this function uncoditionally uses spin_lock_irq() /
spin_unlock_irq(), thus not preserving the CPU flags. Use the
irqsave/irqrestore instead.
The backtrace for the reference:
[ 2.752010] ------------[ cut here ]------------
[ 2.756769] raw_local_irq_restore() called with IRQs enabled
[ 2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50
[ 2.772338] Modules linked in:
[ 2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S 5.17.0-rc6-00384-ge330d0d82eff-dirty #684
[ 2.781384] Freeing initrd memory: 46024K
[ 2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.785841] pc : warn_bogus_irq_restore+0x34/0x50
[ 2.785844] lr : warn_bogus_irq_restore+0x34/0x50
[ 2.785846] sp : ffff80000805b7d0
[ 2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002
[ 2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800
[ 2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00
[ 2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff
[ 2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7
[ 2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8
[ 2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0
[ 2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0
[ 2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000
[ 2.889774] Call trace:
[ 2.892290] warn_bogus_irq_restore+0x34/0x50
[ 2.896770] _raw_spin_unlock_irqrestore+0x94/0xa0
[ 2.901690] genpd_unlock_spin+0x20/0x30
[ 2.905724] genpd_add_device+0x100/0x2d0
[ 2.909850] __genpd_dev_pm_attach+0xa8/0x23c
[ 2.914329] genpd_dev_pm_attach_by_id+0xc4/0x190
[ 2.919167] genpd_dev_pm_attach_by_name+0x3c/0xd0
[ 2.924086] dev_pm_domain_attach_by_name+0x24/0x30
[ 2.929102] psci_dt_attach_cpu+0x24/0x90
[ 2.933230] psci_cpuidle_probe+0x2d4/0x46c
[ 2.937534] platform_probe+0x68/0xe0
[ 2.941304] really_probe.part.0+0x9c/0x2fc
[ 2.945605] __driver_probe_device+0x98/0x144
[ 2.950085] driver_probe_device+0x44/0x15c
[ 2.954385] __device_attach_driver+0xb8/0x120
[ 2.958950] bus_for_each_drv+0x78/0xd0
[ 2.962896] __device_attach+0xd8/0x180
[ 2.966843] device_initial_probe+0x14/0x20
[ 2.971144] bus_probe_device+0x9c/0xa4
[ 2.975092] device_add+0x380/0x88c
[ 2.978679] platform_device_add+0x114/0x234
[ 2.983067] platform_device_register_full+0x100/0x190
[ 2.988344] psci_idle_init+0x6c/0xb0
[ 2.992113] do_one_initcall+0x74/0x3a0
[ 2.996060] kernel_init_freeable+0x2fc/0x384
[ 3.000543] kernel_init+0x28/0x130
[ 3.004132] ret_from_fork+0x10/0x20
[ 3.007817] irq event stamp: 319826
[ 3.011404] hardirqs last enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84
[ 3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c
[ 3.028458] softirqs last enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588
[ 3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174
[ 3.045607] ---[ end trace 0000000000000000 ]---
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/power/main.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 6bce40e2506e..8c4819fe73d4 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -2022,7 +2022,9 @@ static bool pm_ops_is_empty(const struct dev_pm_ops *ops)
void device_pm_check_callbacks(struct device *dev)
{
- spin_lock_irq(&dev->power.lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
dev->power.no_pm_callbacks =
(!dev->bus || (pm_ops_is_empty(dev->bus->pm) &&
!dev->bus->suspend && !dev->bus->resume)) &&
@@ -2031,7 +2033,7 @@ void device_pm_check_callbacks(struct device *dev)
(!dev->pm_domain || pm_ops_is_empty(&dev->pm_domain->ops)) &&
(!dev->driver || (pm_ops_is_empty(dev->driver->pm) &&
!dev->driver->suspend && !dev->driver->resume));
- spin_unlock_irq(&dev->power.lock);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
}
bool dev_pm_skip_suspend(struct device *dev)
--
2.34.1
From: Neil Armstrong <[email protected]>
[ Upstream commit 1528038385c0a706aac9ac165eeb24044fef6825 ]
When the dw-hdmi bridge is in first place of the bridge chain, this
means there is no way to select an input format of the dw-hdmi HW
component.
Since introduction of display-connector, negotiation was broken since
the dw-hdmi negotiation code only worked when the dw-hdmi bridge was
in last position of the bridge chain or behind another bridge also
supporting input & output format negotiation.
Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks")
was introduced to make negotiation work again by making display-connector
act as a pass-through concerning input & output format negotiation.
But in the case where the dw-hdmi is single in the bridge chain, for
example on Renesas SoCs, with the display-connector bridge the dw-hdmi
is no more single, breaking output format.
Reported-by: Biju Das <[email protected]>
Bisected-by: Kieran Bingham <[email protected]>
Tested-by: Kieran Bingham <[email protected]>
Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Neil Armstrong <[email protected]>
[narmstrong: add proper fixes commit]
Reviewed-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index e1211a5b334b..25d58dcfc87e 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2551,8 +2551,9 @@ static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
if (!output_fmts)
return NULL;
- /* If dw-hdmi is the only bridge, avoid negociating with ourselves */
- if (list_is_singular(&bridge->encoder->bridge_chain)) {
+ /* If dw-hdmi is the first or only bridge, avoid negociating with ourselves */
+ if (list_is_singular(&bridge->encoder->bridge_chain) ||
+ list_is_first(&bridge->chain_node, &bridge->encoder->bridge_chain)) {
*num_output_fmts = 1;
output_fmts[0] = MEDIA_BUS_FMT_FIXED;
--
2.34.1
From: Paul E. McKenney <[email protected]>
[ Upstream commit c09929031018913b5783872a8b8cdddef4a543c7 ]
KCSAN reports data races between the rcu_segcblist_clear_flags() and
rcu_segcblist_set_flags() functions, though misreporting the latter
as a call to rcu_segcblist_is_enabled() from call_rcu(). This commit
converts the updates of this field to WRITE_ONCE(), relying on the
resulting unmarked reads to continue to detect buggy concurrent writes
to this field.
Reported-by: Zhouyi Zhou <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/rcu_segcblist.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/rcu/rcu_segcblist.h b/kernel/rcu/rcu_segcblist.h
index 9a19328ff251..5d405943823e 100644
--- a/kernel/rcu/rcu_segcblist.h
+++ b/kernel/rcu/rcu_segcblist.h
@@ -56,13 +56,13 @@ static inline long rcu_segcblist_n_cbs(struct rcu_segcblist *rsclp)
static inline void rcu_segcblist_set_flags(struct rcu_segcblist *rsclp,
int flags)
{
- rsclp->flags |= flags;
+ WRITE_ONCE(rsclp->flags, rsclp->flags | flags);
}
static inline void rcu_segcblist_clear_flags(struct rcu_segcblist *rsclp,
int flags)
{
- rsclp->flags &= ~flags;
+ WRITE_ONCE(rsclp->flags, rsclp->flags & ~flags);
}
static inline bool rcu_segcblist_test_flags(struct rcu_segcblist *rsclp,
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit db0350da8084ad549bca16cc0486c11cc70a1f9b ]
As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid the same code.
Fixes: a6ba2b2dabb5 ("ASoC: Implement WM8350 headphone jack detection")
Signed-off-by: Jiasheng Jiang <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wm8350.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 15d42ce3b21d..41504ce2a682 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -1537,18 +1537,38 @@ static int wm8350_component_probe(struct snd_soc_component *component)
wm8350_clear_bits(wm8350, WM8350_JACK_DETECT,
WM8350_JDL_ENA | WM8350_JDR_ENA);
- wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L,
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L,
wm8350_hpl_jack_handler, 0, "Left jack detect",
priv);
- wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R,
+ if (ret != 0)
+ goto err;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R,
wm8350_hpr_jack_handler, 0, "Right jack detect",
priv);
- wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICSCD,
+ if (ret != 0)
+ goto free_jck_det_l;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICSCD,
wm8350_mic_handler, 0, "Microphone short", priv);
- wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICD,
+ if (ret != 0)
+ goto free_jck_det_r;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICD,
wm8350_mic_handler, 0, "Microphone detect", priv);
+ if (ret != 0)
+ goto free_micscd;
return 0;
+
+free_micscd:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_MICSCD, priv);
+free_jck_det_r:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, priv);
+free_jck_det_l:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, priv);
+err:
+ return ret;
}
static void wm8350_component_remove(struct snd_soc_component *component)
--
2.34.1
From: Kai-Heng Feng <[email protected]>
commit 7570fb41e450ba37bf9335fe3751fa9f502c30fa upstream.
Since MMC core handles runtime PM reference counting, we can avoid doing
redundant runtime PM work in the driver. That means the only thing
commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") misses is
to always enable runtime PM, to let its parent driver enable ASPM in the
runtime idle routine.
Fixes: 7499b529d97f ("mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM")
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 18 ------------------
1 file changed, 18 deletions(-)
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -823,7 +823,6 @@ static void sd_request(struct work_struc
}
mutex_lock(&pcr->pcr_mutex);
- pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -860,8 +859,6 @@ static void sd_request(struct work_struc
data->bytes_xfered = data->blocks * data->blksz;
}
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
finish:
@@ -1093,7 +1090,6 @@ static void sdmmc_set_ios(struct mmc_hos
return;
mutex_lock(&pcr->pcr_mutex);
- pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1127,8 +1123,6 @@ static void sdmmc_set_ios(struct mmc_hos
rtsx_pci_switch_clock(pcr, ios->clock, host->ssc_depth,
host->initial_mode, host->double_clk, host->vpclk);
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
}
@@ -1144,7 +1138,6 @@ static int sdmmc_get_ro(struct mmc_host
return -ENOMEDIUM;
mutex_lock(&pcr->pcr_mutex);
- pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1154,8 +1147,6 @@ static int sdmmc_get_ro(struct mmc_host
if (val & SD_WRITE_PROTECT)
ro = 1;
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
return ro;
@@ -1173,7 +1164,6 @@ static int sdmmc_get_cd(struct mmc_host
return cd;
mutex_lock(&pcr->pcr_mutex);
- pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1183,8 +1173,6 @@ static int sdmmc_get_cd(struct mmc_host
if (val & SD_EXIST)
cd = 1;
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
return cd;
@@ -1282,7 +1270,6 @@ static int sdmmc_switch_voltage(struct m
return err;
mutex_lock(&pcr->pcr_mutex);
- pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1312,8 +1299,6 @@ out:
err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
return err;
@@ -1334,7 +1319,6 @@ static int sdmmc_execute_tuning(struct m
return err;
mutex_lock(&pcr->pcr_mutex);
- pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1367,8 +1351,6 @@ static int sdmmc_execute_tuning(struct m
err = sd_change_phase(host, DDR50_RX_PHASE(pcr), true);
out:
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
return err;
From: Jiasheng Jiang <[email protected]>
[ Upstream commit b0b14b5ba11bec56fad344a4a0b2e16449cc8b94 ]
As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid same code.
Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/wm8350_power.c | 96 ++++++++++++++++++++++++-----
1 file changed, 82 insertions(+), 14 deletions(-)
diff --git a/drivers/power/supply/wm8350_power.c b/drivers/power/supply/wm8350_power.c
index e05cee457471..9c46c48dccb1 100644
--- a/drivers/power/supply/wm8350_power.c
+++ b/drivers/power/supply/wm8350_power.c
@@ -408,44 +408,112 @@ static const struct power_supply_desc wm8350_usb_desc = {
* Initialisation
*********************************************************************/
-static void wm8350_init_charger(struct wm8350 *wm8350)
+static int wm8350_init_charger(struct wm8350 *wm8350)
{
+ int ret;
+
/* register our interest in charger events */
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
wm8350_charger_handler, 0, "Battery hot", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
+ if (ret)
+ goto err;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
wm8350_charger_handler, 0, "Battery cold", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
+ if (ret)
+ goto free_chg_bat_hot;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
wm8350_charger_handler, 0, "Battery fail", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
+ if (ret)
+ goto free_chg_bat_cold;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
wm8350_charger_handler, 0,
"Charger timeout", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
+ if (ret)
+ goto free_chg_bat_fail;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
wm8350_charger_handler, 0,
"Charge end", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
+ if (ret)
+ goto free_chg_to;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
wm8350_charger_handler, 0,
"Charge start", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
+ if (ret)
+ goto free_chg_end;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
wm8350_charger_handler, 0,
"Fast charge ready", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
+ if (ret)
+ goto free_chg_start;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
wm8350_charger_handler, 0,
"Battery <3.9V", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
+ if (ret)
+ goto free_chg_fast_rdy;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
wm8350_charger_handler, 0,
"Battery <3.1V", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
+ if (ret)
+ goto free_chg_vbatt_lt_3p9;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
wm8350_charger_handler, 0,
"Battery <2.85V", wm8350);
+ if (ret)
+ goto free_chg_vbatt_lt_3p1;
/* and supply change events */
- wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
wm8350_charger_handler, 0, "USB", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
+ if (ret)
+ goto free_chg_vbatt_lt_2p85;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
wm8350_charger_handler, 0, "Wall", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
+ if (ret)
+ goto free_ext_usb_fb;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
wm8350_charger_handler, 0, "Battery", wm8350);
+ if (ret)
+ goto free_ext_wall_fb;
+
+ return 0;
+
+free_ext_wall_fb:
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+free_ext_usb_fb:
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+free_chg_vbatt_lt_2p85:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+free_chg_vbatt_lt_3p1:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+free_chg_vbatt_lt_3p9:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+free_chg_fast_rdy:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
+free_chg_start:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+free_chg_end:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+free_chg_to:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+free_chg_bat_fail:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+free_chg_bat_cold:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+free_chg_bat_hot:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+err:
+ return ret;
}
static void free_charger_irq(struct wm8350 *wm8350)
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 1b8c924a05934d2e758ec7da7bd217ef8ebd80ce ]
Ensure that libbpf_netlink_recv() frees dynamically allocated buffer in
all code paths.
Fixes: 9c3de619e13e ("libbpf: Use dynamically allocated buffer when receiving netlink messages")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/netlink.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/tools/lib/bpf/netlink.c b/tools/lib/bpf/netlink.c
index 69b353d55dbf..fadde7d80a51 100644
--- a/tools/lib/bpf/netlink.c
+++ b/tools/lib/bpf/netlink.c
@@ -176,7 +176,8 @@ static int libbpf_netlink_recv(int sock, __u32 nl_pid, int seq,
libbpf_nla_dump_errormsg(nh);
goto done;
case NLMSG_DONE:
- return 0;
+ ret = 0;
+ goto done;
default:
break;
}
@@ -188,9 +189,10 @@ static int libbpf_netlink_recv(int sock, __u32 nl_pid, int seq,
case NL_NEXT:
goto start;
case NL_DONE:
- return 0;
+ ret = 0;
+ goto done;
default:
- return ret;
+ goto done;
}
}
}
--
2.34.1
From: Quinn Tran <[email protected]>
commit 64f24af75b79cba3b86b0760e27e0fa904db570f upstream.
Fix warning message due to adisc being flushed. Linux kernel triggered a
warning message where a different error code type is not matching up with
the expected type. Add additional translation of one error code type to
another.
WARNING: CPU: 2 PID: 1131623 at drivers/scsi/qla2xxx/qla_init.c:498
qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx]
CPU: 2 PID: 1131623 Comm: drmgr Not tainted 5.13.0-rc1-autotest #1
..
GPR28: c000000aaa9c8890 c0080000079ab678 c00000140a104800 c00000002bd19000
NIP [c00800000790857c] qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx]
LR [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx]
Call Trace:
[c00000001cdc3620] [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] (unreliable)
[c00000001cdc3710] [c0080000078f3080] __qla2x00_abort_all_cmds+0x1b8/0x580 [qla2xxx]
[c00000001cdc3840] [c0080000078f589c] qla2x00_abort_all_cmds+0x34/0xd0 [qla2xxx]
[c00000001cdc3880] [c0080000079153d8] qla2x00_abort_isp_cleanup+0x3f0/0x570 [qla2xxx]
[c00000001cdc3920] [c0080000078fb7e8] qla2x00_remove_one+0x3d0/0x480 [qla2xxx]
[c00000001cdc39b0] [c00000000071c274] pci_device_remove+0x64/0x120
[c00000001cdc39f0] [c0000000007fb818] device_release_driver_internal+0x168/0x2a0
[c00000001cdc3a30] [c00000000070e304] pci_stop_bus_device+0xb4/0x100
[c00000001cdc3a70] [c00000000070e4f0] pci_stop_and_remove_bus_device+0x20/0x40
[c00000001cdc3aa0] [c000000000073940] pci_hp_remove_devices+0x90/0x130
[c00000001cdc3b30] [c0080000070704d0] disable_slot+0x38/0x90 [rpaphp] [
c00000001cdc3b60] [c00000000073eb4c] power_write_file+0xcc/0x180
[c00000001cdc3be0] [c0000000007354bc] pci_slot_attr_store+0x3c/0x60
[c00000001cdc3c00] [c00000000055f820] sysfs_kf_write+0x60/0x80 [c00000001cdc3c20]
[c00000000055df10] kernfs_fop_write_iter+0x1a0/0x290
[c00000001cdc3c70] [c000000000447c4c] new_sync_write+0x14c/0x1d0
[c00000001cdc3d10] [c00000000044b134] vfs_write+0x224/0x330
[c00000001cdc3d60] [c00000000044b3f4] ksys_write+0x74/0x130
[c00000001cdc3db0] [c00000000002df70] system_call_exception+0x150/0x2d0
[c00000001cdc3e10] [c00000000000d45c] system_call_common+0xec/0x278
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reported-by: Abdul Haleem <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -295,6 +295,8 @@ static void qla2x00_async_login_sp_done(
ea.iop[0] = lio->u.logio.iop[0];
ea.iop[1] = lio->u.logio.iop[1];
ea.sp = sp;
+ if (res)
+ ea.data[0] = MBS_COMMAND_ERROR;
qla24xx_handle_plogi_done_event(vha, &ea);
}
@@ -558,6 +560,8 @@ static void qla2x00_async_adisc_sp_done(
ea.iop[1] = lio->u.logio.iop[1];
ea.fcport = sp->fcport;
ea.sp = sp;
+ if (res)
+ ea.data[0] = MBS_COMMAND_ERROR;
qla24xx_handle_adisc_event(vha, &ea);
/* ref: INIT */
@@ -1238,6 +1242,8 @@ static void qla2x00_async_prli_sp_done(s
ea.sp = sp;
if (res == QLA_OS_TIMER_EXPIRED)
ea.data[0] = QLA_OS_TIMER_EXPIRED;
+ else if (res)
+ ea.data[0] = MBS_COMMAND_ERROR;
qla24xx_handle_prli_done_event(vha, &ea);
}
From: Joe Carnuccio <[email protected]>
commit cfbafad7c6032d449a5a07f2d273acd2437bbc6a upstream.
While allocating firmware dump, check if dump is already collected and do
not re-allocate the buffer.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Joe Carnuccio <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3463,6 +3463,14 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
struct rsp_que *rsp = ha->rsp_q_map[0];
struct qla2xxx_fw_dump *fw_dump;
+ if (ha->fw_dump) {
+ ql_dbg(ql_dbg_init, vha, 0x00bd,
+ "Firmware dump already allocated.\n");
+ return;
+ }
+
+ ha->fw_dumped = 0;
+ ha->fw_dump_cap_flags = 0;
dump_size = fixed_size = mem_size = eft_size = fce_size = mq_size = 0;
req_q_size = rsp_q_size = 0;
From: Charles Keepax <[email protected]>
[ Upstream commit ec29170c724ca30305fc3a19ba2ee73ecac65509 ]
The Madera CODECs use regmap_irq functions but nothing ensures that
regmap_irq is built into the kernel. Add dependencies on the ASoC
symbols for the relevant MFD component. There is no point in building
the ASoC driver if the MFD doesn't support it and the MFD part contains
the necessary dependencies to ensure everything is built into the
kernel.
Reported-by: Mark Brown <[email protected]>
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index f12c9b942678..47e675e8bd00 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -690,6 +690,7 @@ config SND_SOC_CS4349
config SND_SOC_CS47L15
tristate
+ depends on MFD_CS47L15
config SND_SOC_CS47L24
tristate
@@ -697,15 +698,19 @@ config SND_SOC_CS47L24
config SND_SOC_CS47L35
tristate
+ depends on MFD_CS47L35
config SND_SOC_CS47L85
tristate
+ depends on MFD_CS47L85
config SND_SOC_CS47L90
tristate
+ depends on MFD_CS47L90
config SND_SOC_CS47L92
tristate
+ depends on MFD_CS47L92
# Cirrus Logic Quad-Channel ADC
config SND_SOC_CS53L30
--
2.34.1
From: Oliver Hartkopp <[email protected]>
[ Upstream commit 42bf50a1795a1854d48717b7361dbdbce496b16b ]
When providing the MSG_TRUNC flag via recvmsg() syscall the return value
provides the real length of the packet or datagram, even when it was longer
than the passed buffer.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1065932671
Link: https://lore.kernel.org/all/[email protected]
Suggested-by: Derek Will <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/can/isotp.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1006,29 +1006,28 @@ static int isotp_recvmsg(struct socket *
struct sock *sk = sock->sk;
struct sk_buff *skb;
struct isotp_sock *so = isotp_sk(sk);
- int err = 0;
- int noblock;
+ int noblock = flags & MSG_DONTWAIT;
+ int ret = 0;
- noblock = flags & MSG_DONTWAIT;
- flags &= ~MSG_DONTWAIT;
+ if (flags & ~(MSG_DONTWAIT | MSG_TRUNC))
+ return -EINVAL;
if (!so->bound)
return -EADDRNOTAVAIL;
- skb = skb_recv_datagram(sk, flags, noblock, &err);
+ flags &= ~MSG_DONTWAIT;
+ skb = skb_recv_datagram(sk, flags, noblock, &ret);
if (!skb)
- return err;
+ return ret;
if (size < skb->len)
msg->msg_flags |= MSG_TRUNC;
else
size = skb->len;
- err = memcpy_to_msg(msg, skb->data, size);
- if (err < 0) {
- skb_free_datagram(sk, skb);
- return err;
- }
+ ret = memcpy_to_msg(msg, skb->data, size);
+ if (ret < 0)
+ goto out_err;
sock_recv_timestamp(msg, sk, skb);
@@ -1038,9 +1037,13 @@ static int isotp_recvmsg(struct socket *
memcpy(msg->msg_name, skb->cb, msg->msg_namelen);
}
+ /* set length of return value */
+ ret = (flags & MSG_TRUNC) ? skb->len : size;
+
+out_err:
skb_free_datagram(sk, skb);
- return size;
+ return ret;
}
static int isotp_release(struct socket *sock)
From: Randy Dunlap <[email protected]>
[ Upstream commit 96c9e802c64014a7716865332d732cc9c7f24593 ]
__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/[email protected]
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Cc: [email protected]
Cc: Jason Wessel <[email protected]>
Cc: Daniel Thompson <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/kgdbts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 67c5b452dd35..88b91ad8e541 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -1070,10 +1070,10 @@ static int kgdbts_option_setup(char *opt)
{
if (strlen(opt) >= MAX_CONFIG_LEN) {
printk(KERN_ERR "kgdbts: config string too long\n");
- return -ENOSPC;
+ return 1;
}
strcpy(config, opt);
- return 0;
+ return 1;
}
__setup("kgdbts=", kgdbts_option_setup);
--
2.34.1
From: Oliver Hartkopp <[email protected]>
commit 3ea566422cbde9610c2734980d1286ab681bb40e upstream.
Syzbot created an environment that lead to a state machine status that
can not be reached with a compliant CAN ID address configuration.
The provided address information consisted of CAN ID 0x6000001 and 0xC28001
which both boil down to 11 bit CAN IDs 0x001 in sending and receiving.
Sanitize the SFF/EFF CAN ID values before performing the address checks.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/[email protected]
Reported-by: [email protected]
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/isotp.c | 38 ++++++++++++++++++++------------------
1 file changed, 20 insertions(+), 18 deletions(-)
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1104,6 +1104,7 @@ static int isotp_bind(struct socket *soc
struct net *net = sock_net(sk);
int ifindex;
struct net_device *dev;
+ canid_t tx_id, rx_id;
int err = 0;
int notify_enetdown = 0;
int do_rx_reg = 1;
@@ -1111,8 +1112,18 @@ static int isotp_bind(struct socket *soc
if (len < ISOTP_MIN_NAMELEN)
return -EINVAL;
- if (addr->can_addr.tp.tx_id & (CAN_ERR_FLAG | CAN_RTR_FLAG))
- return -EADDRNOTAVAIL;
+ /* sanitize tx/rx CAN identifiers */
+ tx_id = addr->can_addr.tp.tx_id;
+ if (tx_id & CAN_EFF_FLAG)
+ tx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);
+ else
+ tx_id &= CAN_SFF_MASK;
+
+ rx_id = addr->can_addr.tp.rx_id;
+ if (rx_id & CAN_EFF_FLAG)
+ rx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);
+ else
+ rx_id &= CAN_SFF_MASK;
if (!addr->can_ifindex)
return -ENODEV;
@@ -1124,21 +1135,13 @@ static int isotp_bind(struct socket *soc
do_rx_reg = 0;
/* do not validate rx address for functional addressing */
- if (do_rx_reg) {
- if (addr->can_addr.tp.rx_id == addr->can_addr.tp.tx_id) {
- err = -EADDRNOTAVAIL;
- goto out;
- }
-
- if (addr->can_addr.tp.rx_id & (CAN_ERR_FLAG | CAN_RTR_FLAG)) {
- err = -EADDRNOTAVAIL;
- goto out;
- }
+ if (do_rx_reg && rx_id == tx_id) {
+ err = -EADDRNOTAVAIL;
+ goto out;
}
if (so->bound && addr->can_ifindex == so->ifindex &&
- addr->can_addr.tp.rx_id == so->rxid &&
- addr->can_addr.tp.tx_id == so->txid)
+ rx_id == so->rxid && tx_id == so->txid)
goto out;
dev = dev_get_by_index(net, addr->can_ifindex);
@@ -1162,8 +1165,7 @@ static int isotp_bind(struct socket *soc
ifindex = dev->ifindex;
if (do_rx_reg)
- can_rx_register(net, dev, addr->can_addr.tp.rx_id,
- SINGLE_MASK(addr->can_addr.tp.rx_id),
+ can_rx_register(net, dev, rx_id, SINGLE_MASK(rx_id),
isotp_rcv, sk, "isotp", sk);
dev_put(dev);
@@ -1183,8 +1185,8 @@ static int isotp_bind(struct socket *soc
/* switch to new settings */
so->ifindex = ifindex;
- so->rxid = addr->can_addr.tp.rx_id;
- so->txid = addr->can_addr.tp.tx_id;
+ so->rxid = rx_id;
+ so->txid = tx_id;
so->bound = 1;
out:
From: Vitaly Kuznetsov <[email protected]>
commit 00b5f37189d24ac3ed46cb7f11742094778c46ce upstream.
When kvm_irq_delivery_to_apic_fast() is called with APIC_DEST_SELF
shorthand, 'src' must not be NULL. Crash the VM with KVM_BUG_ON()
instead of crashing the host.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -987,6 +987,10 @@ bool kvm_irq_delivery_to_apic_fast(struc
*r = -1;
if (irq->shorthand == APIC_DEST_SELF) {
+ if (KVM_BUG_ON(!src, kvm)) {
+ *r = 0;
+ return true;
+ }
*r = kvm_apic_set_irq(src->vcpu, irq, dest_map);
return true;
}
From: Dan Carpenter <[email protected]>
[ Upstream commit dc0ce6cc4b133f5f2beb8b47dacae13a7d283c2c ]
The "test_dev" pointer is freed but then returned to the caller.
Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/test_kmod.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/lib/test_kmod.c b/lib/test_kmod.c
index ce1589391413..cb800b1d0d99 100644
--- a/lib/test_kmod.c
+++ b/lib/test_kmod.c
@@ -1149,6 +1149,7 @@ static struct kmod_test_device *register_test_dev_kmod(void)
if (ret) {
pr_err("could not register misc device: %d\n", ret);
free_test_dev_kmod(test_dev);
+ test_dev = NULL;
goto out;
}
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 83ba7e895debc529803a7a258653f2fe9bf3bf40 ]
A struct device can never be devm_alloc()'ed.
Here, it is embedded in "struct fsi_master", and "struct fsi_master" is
embedded in "struct fsi_master_aspeed".
Since "struct device" is embedded, the data structure embedding it must be
released with the release function, as is already done here.
So use kzalloc() instead of devm_kzalloc() when allocating "aspeed" and
update all error handling branches accordingly.
This prevent a potential double free().
This also fix another issue if opb_readl() fails. Instead of a direct
return, it now jumps in the error handling path.
Fixes: 606397d67f41 ("fsi: Add ast2600 master driver")
Suggested-by: Greg KH <[email protected]>
Suggested-by: Guenter Roeck <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/2c123f8b0a40dc1a061fae982169fe030b4f47e6.1641765339.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/fsi/fsi-master-aspeed.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index 8606e55c1721..0bed2fab8055 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -542,25 +542,28 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
return rc;
}
- aspeed = devm_kzalloc(&pdev->dev, sizeof(*aspeed), GFP_KERNEL);
+ aspeed = kzalloc(sizeof(*aspeed), GFP_KERNEL);
if (!aspeed)
return -ENOMEM;
aspeed->dev = &pdev->dev;
aspeed->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(aspeed->base))
- return PTR_ERR(aspeed->base);
+ if (IS_ERR(aspeed->base)) {
+ rc = PTR_ERR(aspeed->base);
+ goto err_free_aspeed;
+ }
aspeed->clk = devm_clk_get(aspeed->dev, NULL);
if (IS_ERR(aspeed->clk)) {
dev_err(aspeed->dev, "couldn't get clock\n");
- return PTR_ERR(aspeed->clk);
+ rc = PTR_ERR(aspeed->clk);
+ goto err_free_aspeed;
}
rc = clk_prepare_enable(aspeed->clk);
if (rc) {
dev_err(aspeed->dev, "couldn't enable clock\n");
- return rc;
+ goto err_free_aspeed;
}
rc = setup_cfam_reset(aspeed);
@@ -595,7 +598,7 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
rc = opb_readl(aspeed, ctrl_base + FSI_MVER, &raw);
if (rc) {
dev_err(&pdev->dev, "failed to read hub version\n");
- return rc;
+ goto err_release;
}
reg = be32_to_cpu(raw);
@@ -634,6 +637,8 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
err_release:
clk_disable_unprepare(aspeed->clk);
+err_free_aspeed:
+ kfree(aspeed);
return rc;
}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 9747a78d5f758a5284751a10aee13c30d02bd5f1 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: 727fec790ead ("ath10k: Setup the msa resources before qmi init")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 9513ab696fff..f79dd9a71690 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1556,11 +1556,11 @@ static int ath10k_setup_msa_resources(struct ath10k *ar, u32 msa_size)
node = of_parse_phandle(dev->of_node, "memory-region", 0);
if (node) {
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret) {
dev_err(dev, "failed to resolve msa fixed region\n");
return ret;
}
- of_node_put(node);
ar->msa.paddr = r.start;
ar->msa.mem_size = resource_size(&r);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit a58c22cfbbf62fefca090334bbd35fd132e92a23 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
index 2fa436475b40..c8ad3ef42bd3 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
@@ -246,6 +246,7 @@ static int dvic_probe_of(struct platform_device *pdev)
adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
if (adapter_node) {
adapter = of_get_i2c_adapter_by_node(adapter_node);
+ of_node_put(adapter_node);
if (adapter == NULL) {
dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
omap_dss_put_device(ddata->in);
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 5a811126d38f9767a20cc271b34db7c8efc5a46c ]
Because of the possible failure of the allocation, data->domains might
be NULL pointer and will cause the dereference of the NULL pointer
later.
Therefore, it might be better to check it and directly return -ENOMEM
without releasing data manually if fails, because the comment of the
devm_kmalloc() says "Memory allocated with this function is
automatically freed on driver detach.".
Fixes: bbe3a66c3f5a ("soc: qcom: rpmpd: Add a Power domain driver to model corners")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/rpmpd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index dbf494e92574..9f07274b0d28 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -546,6 +546,9 @@ static int rpmpd_probe(struct platform_device *pdev)
data->domains = devm_kcalloc(&pdev->dev, num, sizeof(*data->domains),
GFP_KERNEL);
+ if (!data->domains)
+ return -ENOMEM;
+
data->num_domains = num;
for (i = 0; i < num; i++) {
--
2.34.1
From: Thomas Richter <[email protected]>
[ Upstream commit d0a0a511493d269514fcbd852481cdca32c95350 ]
I have run into the following issue:
# perf stat -a -e new_pmu/INSTRUCTION_7/ -- mytest -c1 7
Performance counter stats for 'system wide':
0 new_pmu/INSTRUCTION_7/
0.000366428 seconds time elapsed
#
The new PMU for s390 counts the execution of certain CPU instructions.
The root cause is the extremely small run time of the mytest program. It
just executes some assembly instructions and then exits.
In above invocation the instruction is executed exactly one time (-c1
option). The PMU is expected to report this one time execution by a
counter value of one, but fails to do so in some cases, not all.
Debugging reveals the invocation of the child process is done
*before* the counter events are installed and enabled.
Tracing reveals that sometimes the child process starts and exits before
the event is installed on all CPUs. The more CPUs the machine has, the
more often this miscount happens.
Fix this by reversing the start of the work load after the events have
been installed on the specified CPUs. Now the comment also matches the
code.
Output after:
# perf stat -a -e new_pmu/INSTRUCTION_7/ -- mytest -c1 7
Performance counter stats for 'system wide':
1 new_pmu/INSTRUCTION_7/
0.000366428 seconds time elapsed
#
Now the correct result is reported rock solid all the time regardless
how many CPUs are online.
Reviewers notes:
Jiri:
Right, without -a the event has enable_on_exec so the race does not
matter, but it's a problem for system wide with fork.
Namhyung:
Agreed. Also we may move the enable_counters() and the clock code out of
the if block to be shared with the else block.
Fixes: acf2892270dcc428 ("perf stat: Use perf_evlist__prepare/start_workload()")
Signed-off-by: Thomas Richter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Acked-by: Sumanth Korikkar <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/builtin-stat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index f0ecfda34ece..1a194edb5452 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -956,10 +956,10 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
* Enable counters and exec the command:
*/
if (forks) {
- evlist__start_workload(evsel_list);
err = enable_counters();
if (err)
return -1;
+ evlist__start_workload(evsel_list);
t0 = rdclock();
clock_gettime(CLOCK_MONOTONIC, &ref_time);
--
2.34.1
From: Yongzhi Liu <[email protected]>
[ Upstream commit 087f9c3f2309ed183f7e4b85ae57121d8663224d ]
In case the second xa_insert() fails, the obj_event is not released. Fix
the error unwind flow to free that memory to avoid a memory leak.
Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Yongzhi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/devx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c
index e95967aefe78..21beded40066 100644
--- a/drivers/infiniband/hw/mlx5/devx.c
+++ b/drivers/infiniband/hw/mlx5/devx.c
@@ -1891,8 +1891,10 @@ subscribe_event_xa_alloc(struct mlx5_devx_event_table *devx_event_table,
key_level2,
obj_event,
GFP_KERNEL);
- if (err)
+ if (err) {
+ kfree(obj_event);
return err;
+ }
INIT_LIST_HEAD(&obj_event->obj_sub_list);
}
--
2.34.1
From: Kuogee Hsieh <[email protected]>
[ Upstream commit d4aca422539c441a7f3fec749287b36de37d9b6b ]
Some of DP link compliant test expects to return fail-safe mode
if prefer detailed timing mode can not be supported by mainlink's
lane and rate after link training. Therefore add fail-safe mode
into connector mode list as backup mode. This patch fixes test
case 4.2.2.1.
Changes in v2:
-- add Fixes text string
Fixes: 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1")
Signed-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_panel.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
index 2181b60e1d1d..5f23e6f09199 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -212,6 +212,11 @@ int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
if (drm_add_modes_noedid(connector, 640, 480))
drm_set_preferred_mode(connector, 640, 480);
mutex_unlock(&connector->dev->mode_config.mutex);
+ } else {
+ /* always add fail-safe mode as backup mode */
+ mutex_lock(&connector->dev->mode_config.mutex);
+ drm_add_modes_noedid(connector, 640, 480);
+ mutex_unlock(&connector->dev->mode_config.mutex);
}
if (panel->aux_cfg_update_done) {
--
2.34.1
From: Anders Roxell <[email protected]>
commit a633cb1edddaa643fadc70abc88f89a408fa834a upstream.
Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: [email protected] # v4.14+
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/sstep.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -3306,7 +3306,7 @@ int emulate_loadstore(struct pt_regs *re
__put_user_asmx(op->val, ea, err, "stbcx.", cr);
break;
case 2:
- __put_user_asmx(op->val, ea, err, "stbcx.", cr);
+ __put_user_asmx(op->val, ea, err, "sthcx.", cr);
break;
#endif
case 4:
From: Matthew Wilcox (Oracle) <[email protected]>
commit 3ed4bb77156da0bc732847c8c9df92454c1fbeea upstream.
When splitting a value entry, we may need to add the new nodes to the LRU
list and remove the parent node from the LRU list. The WARN_ON checks
in shadow_lru_isolate() catch this oversight. This bug was latent
until we stopped splitting folios in shrink_page_list() with commit
820c4e2e6f51 ("mm/vmscan: Free non-shmem folios without splitting them").
That allows the creation of large shadow entries, and subsequently when
trying to page in a small page, we will split the large shadow entry
in __filemap_add_folio().
Fixes: 8fc75643c5e1 ("XArray: add xas_split")
Reported-by: Hugh Dickins <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/xarray.c | 2 ++
1 file changed, 2 insertions(+)
--- a/lib/xarray.c
+++ b/lib/xarray.c
@@ -1081,6 +1081,7 @@ void xas_split(struct xa_state *xas, voi
xa_mk_node(child));
if (xa_is_value(curr))
values--;
+ xas_update(xas, child);
} else {
unsigned int canon = offset - xas->xa_sibs;
@@ -1095,6 +1096,7 @@ void xas_split(struct xa_state *xas, voi
} while (offset-- > xas->xa_offset);
node->nr_values += values;
+ xas_update(xas, node);
}
EXPORT_SYMBOL_GPL(xas_split);
#endif
From: Shengjiu Wang <[email protected]>
[ Upstream commit 6ddf611219ba8f7c8fa0d26b39710a641e7d37a5 ]
The TX clock source may be changed in next case, need to
disable it when stop, otherwise the TX may not work after
changing the clock source, error log is:
aplay: pcm_write:2058: write error: Input/output error
Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl_spdif.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 1c53719bb61e..8b5c3ba48516 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -598,6 +598,8 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK |
SCR_TXSEL_MASK | SCR_USRC_SEL_MASK |
SCR_TXFIFO_FSEL_MASK;
+ /* Disable TX clock */
+ regmap_update_bits(regmap, REG_SPDIF_STC, STC_TXCLK_ALL_EN_MASK, 0);
} else {
scr = SCR_RXFIFO_OFF | SCR_RXFIFO_CTL_ZERO;
mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK|
--
2.34.1
From: Jernej Skrabec <[email protected]>
[ Upstream commit ee8b887329c78971967506f3ac79b9302c9f83c1 ]
Neighbour info buffer size needs to be 794 kiB in H6. This is actually
already indirectly mentioned in the comment, but smaller size is used
nevertheless.
Increase buffer size to cover H6 needs. Since increase is not that big
in absolute numbers, it doesn't make sense to complicate logic for older
generations.
Bug was discovered using iommu, which reported access error when trying
to play H265 video.
Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
index ef0311a16d01..754942ecf064 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
@@ -23,7 +23,7 @@
* Subsequent BSP implementations seem to double the neighbor info buffer size
* for the H6 SoC, which may be related to 10 bit H265 support.
*/
-#define CEDRUS_H265_NEIGHBOR_INFO_BUF_SIZE (397 * SZ_1K)
+#define CEDRUS_H265_NEIGHBOR_INFO_BUF_SIZE (794 * SZ_1K)
#define CEDRUS_H265_ENTRY_POINTS_BUF_SIZE (4 * SZ_1K)
#define CEDRUS_H265_MV_COL_BUF_UNIT_CTB_SIZE 160
--
2.34.1
From: Richard Haines <[email protected]>
[ Upstream commit 65881e1db4e948614d9eb195b8e1197339822949 ]
These ioctls are equivalent to fcntl(fd, F_SETFD, flags), which SELinux
always allows too. Furthermore, a failed FIOCLEX could result in a file
descriptor being leaked to a process that should not have access to it.
As this patch removes access controls, a policy capability needs to be
enabled in policy to always allow these ioctls.
Based-on-patch-by: Demi Marie Obenour <[email protected]>
Signed-off-by: Richard Haines <[email protected]>
[PM: subject line tweak]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/hooks.c | 6 ++++++
security/selinux/include/policycap.h | 1 +
security/selinux/include/policycap_names.h | 3 ++-
security/selinux/include/security.h | 7 +++++++
4 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 9a89e456d378..9ce029b2f226 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3795,6 +3795,12 @@ static int selinux_file_ioctl(struct file *file, unsigned int cmd,
CAP_OPT_NONE, true);
break;
+ case FIOCLEX:
+ case FIONCLEX:
+ if (!selinux_policycap_ioctl_skip_cloexec())
+ error = ioctl_has_perm(cred, file, FILE__IOCTL, (u16) cmd);
+ break;
+
/* default case assumes that the command will go
* to the file's ioctl() function.
*/
diff --git a/security/selinux/include/policycap.h b/security/selinux/include/policycap.h
index 2ec038efbb03..a9e572ca4fd9 100644
--- a/security/selinux/include/policycap.h
+++ b/security/selinux/include/policycap.h
@@ -11,6 +11,7 @@ enum {
POLICYDB_CAPABILITY_CGROUPSECLABEL,
POLICYDB_CAPABILITY_NNP_NOSUID_TRANSITION,
POLICYDB_CAPABILITY_GENFS_SECLABEL_SYMLINKS,
+ POLICYDB_CAPABILITY_IOCTL_SKIP_CLOEXEC,
__POLICYDB_CAPABILITY_MAX
};
#define POLICYDB_CAPABILITY_MAX (__POLICYDB_CAPABILITY_MAX - 1)
diff --git a/security/selinux/include/policycap_names.h b/security/selinux/include/policycap_names.h
index b89289f092c9..ebd64afe1def 100644
--- a/security/selinux/include/policycap_names.h
+++ b/security/selinux/include/policycap_names.h
@@ -12,7 +12,8 @@ const char *selinux_policycap_names[__POLICYDB_CAPABILITY_MAX] = {
"always_check_network",
"cgroup_seclabel",
"nnp_nosuid_transition",
- "genfs_seclabel_symlinks"
+ "genfs_seclabel_symlinks",
+ "ioctl_skip_cloexec"
};
#endif /* _SELINUX_POLICYCAP_NAMES_H_ */
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index ac0ece01305a..c0d966020ebd 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -219,6 +219,13 @@ static inline bool selinux_policycap_genfs_seclabel_symlinks(void)
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_GENFS_SECLABEL_SYMLINKS]);
}
+static inline bool selinux_policycap_ioctl_skip_cloexec(void)
+{
+ struct selinux_state *state = &selinux_state;
+
+ return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_IOCTL_SKIP_CLOEXEC]);
+}
+
struct selinux_policy_convert_data;
struct selinux_load_state {
--
2.34.1
From: Andrew Price <[email protected]>
commit 27ca8273fda398638ca994a207323a85b6d81190 upstream.
Per fstrim(8) we must round up the minlen argument to the fs block size.
The current calculation doesn't take into account devices that have a
discard granularity and requested minlen less than 1 fs block, so the
value can get shifted away to zero in the translation to fs blocks.
The zero minlen passed to gfs2_rgrp_send_discards() then allows
sb_issue_discard() to be called with nr_sects == 0 which returns -EINVAL
and results in gfs2_rgrp_send_discards() returning -EIO.
Make sure minlen is never < 1 fs block by taking the max of the
requested minlen and the fs block size before comparing to the device's
discard granularity and shifting to fs blocks.
Fixes: 076f0faa764ab ("GFS2: Fix FITRIM argument handling")
Signed-off-by: Andrew Price <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/rgrp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1428,7 +1428,8 @@ int gfs2_fitrim(struct file *filp, void
start = r.start >> bs_shift;
end = start + (r.len >> bs_shift);
- minlen = max_t(u64, r.minlen,
+ minlen = max_t(u64, r.minlen, sdp->sd_sb.sb_bsize);
+ minlen = max_t(u64, minlen,
q->limits.discard_granularity) >> bs_shift;
if (end <= start || minlen > sdp->sd_max_rg_data)
From: Abel Vesa <[email protected]>
[ Upstream commit 4cb7df64c732b2b9918424095c11660c2a8c4a33 ]
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. Moreover,
the consumer driver of the mentioned clock might gate it and leave
the ECSPI2 (the true owner of that gate) hanging. So lets use the
audio_mclk_post_div, which is the parent.
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 4 ++--
arch/arm/boot/dts/imx7-mba7.dtsi | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 4 ++--
arch/arm/boot/dts/imx7d-pico-pi.dts | 4 ++--
arch/arm/boot/dts/imx7d-sdb.dts | 4 ++--
arch/arm/boot/dts/imx7s-warp.dts | 4 ++--
7 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..f1c60b0cb143 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -40,7 +40,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -293,7 +293,7 @@
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
reg = <0x0a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
VDDA-supply = <®_module_3v3_avdd>;
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index 5e6bef230dc7..b55a7792a839 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -264,7 +264,7 @@
tlv320aic32x4: audio-codec@18 {
compatible = "ti,tlv320aic32x4";
reg = <0x18>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
ldoin-supply = <®_audio_3v3>;
iov-supply = <®_audio_3v3>;
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
wlf,shared-lrclk;
};
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -41,7 +41,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_vref_1v8>;
};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -41,7 +41,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_vref_1v8>;
};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 4a0d83784d7d..e5f1bdbe7992 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -385,14 +385,14 @@
codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
wlf,shared-lrclk;
wlf,hp-cfg = <2 2 3>;
wlf,gpio-cfg = <1 3>;
assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
<&clks IMX7D_PLL_AUDIO_POST_DIV>,
- <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
assigned-clock-rates = <0>, <884736000>, <12288000>;
};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 569bbd84e371..558b064da743 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -232,7 +232,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
VDDA-supply = <&vgen4_reg>;
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 135efc3a76d127691afaf1864e4ab627bf09d53d ]
The > needs to be >= to prevent an off by one access.
Fixes: d5f1e6a2bb61 ("clk: imx: imx8qxp-lpcg: add parsing clocks from device tree")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/20220228075014.GD13685@kili
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx8qxp-lpcg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx8qxp-lpcg.c b/drivers/clk/imx/clk-imx8qxp-lpcg.c
index b23758083ce5..5e31a6a24b3a 100644
--- a/drivers/clk/imx/clk-imx8qxp-lpcg.c
+++ b/drivers/clk/imx/clk-imx8qxp-lpcg.c
@@ -248,7 +248,7 @@ static int imx_lpcg_parse_clks_from_dt(struct platform_device *pdev,
for (i = 0; i < count; i++) {
idx = bit_offset[i] / 4;
- if (idx > IMX_LPCG_MAX_CLKS) {
+ if (idx >= IMX_LPCG_MAX_CLKS) {
dev_warn(&pdev->dev, "invalid bit offset of clock %d\n",
i);
ret = -EINVAL;
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 30d17c12b0895e15ce22ebc1f52a4ff02df6dbc6 ]
The recent fix for NULL sta in iwl_mvm_get_tx_rate() still has a call
of iwl_mvm_sta_from_mac80211() that may be called with NULL sta.
Although this practically only points to the address and the actual
access doesn't happen due to the conditional evaluation at a later
point, it looks a bit flaky.
This patch drops the temporary variable above and evaluates
iwm_mvm_sta_from_mac80211() directly for avoiding confusions.
Fixes: d599f714b73e ("iwlwifi: mvm: don't crash on invalid rate w/o STA")
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 06fbd9ab37df..b5368cb57ca8 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -271,15 +271,14 @@ static u32 iwl_mvm_get_tx_rate(struct iwl_mvm *mvm,
/* info->control is only relevant for non HW rate control */
if (!ieee80211_hw_check(mvm->hw, HAS_RATE_CONTROL)) {
- struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
-
/* HT rate doesn't make sense for a non data frame */
WARN_ONCE(info->control.rates[0].flags & IEEE80211_TX_RC_MCS &&
!ieee80211_is_data(fc),
"Got a HT rate (flags:0x%x/mcs:%d/fc:0x%x/state:%d) for a non data frame\n",
info->control.rates[0].flags,
info->control.rates[0].idx,
- le16_to_cpu(fc), sta ? mvmsta->sta_state : -1);
+ le16_to_cpu(fc),
+ sta ? iwl_mvm_sta_from_mac80211(sta)->sta_state : -1);
rate_idx = info->control.rates[0].idx;
}
--
2.34.1
From: Jon Hunter <[email protected]>
commit 320689a1b543ca1396b3ed43bb18045e4a7ffd79 upstream.
When running dt_binding_check on the nvidia,tegra210-quad.yaml binding
document the following error is reported ...
nvidia,tegra210-quad.example.dt.yaml:0:0: /example-0/spi@70410000/flash@0:
failed to match any schema with compatible: ['spi-nor']
Update the example in the binding document to fix the above error.
Signed-off-by: Jon Hunter <[email protected]>
Fixes: 9684752e5fe3 ("dt-bindings: spi: Add Tegra Quad SPI device tree binding")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -106,7 +106,7 @@ examples:
dma-names = "rx", "tx";
flash@0 {
- compatible = "spi-nor";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
spi-tx-bus-width = <2>;
From: Shannon Nelson <[email protected]>
[ Upstream commit 9ad2939a1525962a79a2fd974ec7e3a71455b964 ]
The watchdog expects the lif to fully exist when it goes off,
so lets not start the watchdog until all is ready in case there
is some quirky time dialation that makes probe take multiple
seconds.
Fixes: 089406bc5ad6 ("ionic: add a watchdog timer to monitor heartbeat")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c | 4 +++-
drivers/net/ethernet/pensando/ionic/ionic_dev.c | 3 ---
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
index 7e296fa71b36..40fa5bce2ac2 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
@@ -331,6 +331,9 @@ static int ionic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_deregister_lifs;
}
+ mod_timer(&ionic->watchdog_timer,
+ round_jiffies(jiffies + ionic->watchdog_period));
+
return 0;
err_out_deregister_lifs:
@@ -348,7 +351,6 @@ static int ionic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err_out_reset:
ionic_reset(ionic);
err_out_teardown:
- del_timer_sync(&ionic->watchdog_timer);
pci_clear_master(pdev);
/* Don't fail the probe for these errors, keep
* the hw interface around for inspection
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.c b/drivers/net/ethernet/pensando/ionic/ionic_dev.c
index 0d6858ab511c..1b7730308d6a 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_dev.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.c
@@ -122,9 +122,6 @@ int ionic_dev_setup(struct ionic *ionic)
idev->fw_generation = IONIC_FW_STS_F_GENERATION &
ioread8(&idev->dev_info_regs->fw_status);
- mod_timer(&ionic->watchdog_timer,
- round_jiffies(jiffies + ionic->watchdog_period));
-
idev->db_pages = bar->vaddr;
idev->phy_db_pages = bar->bus_addr;
--
2.34.1
From: Quinn Tran <[email protected]>
commit afd438ff874ca40b74321b3fa19bd61adfd7ca0c upstream.
The driver makes a call into midlayer (fc_remote_port_delete) which can put
the thread to sleep. The thread that originates the call is in interrupt
context. The combination of the two trigger a crash. Schedule the call in
non-interrupt context where it is more safe.
kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000
kernel: Call Trace:
kernel: <IRQ>
kernel: dump_stack+0x66/0x81
kernel: __schedule_bug.cold.90+0x5/0x1d
kernel: __schedule+0x7af/0x960
kernel: schedule+0x28/0x80
kernel: schedule_timeout+0x26d/0x3b0
kernel: wait_for_completion+0xb4/0x140
kernel: ? wake_up_q+0x70/0x70
kernel: __wait_rcu_gp+0x12c/0x160
kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod]
kernel: synchronize_sched+0x6c/0x80
kernel: ? call_rcu_bh+0x20/0x20
kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10
kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod]
kernel: starget_for_each_device+0x85/0xb0 [scsi_mod]
kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod]
kernel: scsi_init_io+0x388/0x3d0 [scsi_mod]
kernel: device_for_each_child+0x54/0x90
kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc]
kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx]
kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx]
kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx]
kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx]
kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx]
kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx]
kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx]
kernel: __handle_irq_event_percpu+0x40/0x180
kernel: handle_irq_event_percpu+0x30/0x80
kernel: handle_irq_event+0x36/0x60
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2212,12 +2212,7 @@ qla24xx_handle_plogi_done_event(struct s
ql_dbg(ql_dbg_disc, vha, 0x20eb, "%s %d %8phC cmd error %x\n",
__func__, __LINE__, ea->fcport->port_name, ea->data[1]);
- ea->fcport->flags &= ~FCF_ASYNC_SENT;
- qla2x00_set_fcport_disc_state(ea->fcport, DSC_LOGIN_FAILED);
- if (ea->data[1] & QLA_LOGIO_LOGIN_RETRIED)
- set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
- else
- qla2x00_mark_device_lost(vha, ea->fcport, 1);
+ qlt_schedule_sess_for_deletion(ea->fcport);
break;
case MBS_LOOP_ID_USED:
/* data[1] = IO PARAM 1 = nport ID */
From: Lv Ruyi <[email protected]>
commit bed5b60bf67ccd8957b8c0558fead30c4a3f5d3f upstream.
kzalloc is a memory allocation function which can return NULL when some
internal memory errors happen. It is safer to add null pointer check.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: c1a3c36017d4 ("proc: bootconfig: Add /proc/bootconfig to show boot config list")
Acked-by: Masami Hiramatsu <[email protected]>
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Lv Ruyi <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/proc/bootconfig.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/proc/bootconfig.c
+++ b/fs/proc/bootconfig.c
@@ -32,6 +32,8 @@ static int __init copy_xbc_key_value_lis
int ret = 0;
key = kzalloc(XBC_KEYLEN_MAX, GFP_KERNEL);
+ if (!key)
+ return -ENOMEM;
xbc_for_each_key_value(leaf, val) {
ret = xbc_node_compose_key(leaf, key, XBC_KEYLEN_MAX);
From: Jiasheng Jiang <[email protected]>
[ Upstream commit de2c6f98817fa5decb9b7d3b3a8a3ab864c10588 ]
There is one call trace that snd_soc_register_card()
->snd_soc_bind_card()->soc_init_pcm_runtime()
->snd_soc_dai_compress_new()->snd_soc_new_compress().
In the trace the 'codec_dai' transfers from card->dai_link,
and we can see from the snd_soc_add_pcm_runtime() in
snd_soc_bind_card() that, if value of card->dai_link->num_codecs
is 0, then 'codec_dai' could be null pointer caused
by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'.
And snd_soc_register_card() is called by various platforms.
Therefore, it is better to add the check in the case of misusing.
And because 'cpu_dai' has already checked in soc_init_pcm_runtime(),
there is no need to check again.
Adding the check as follow, then if 'codec_dai' is null,
snd_soc_new_compress() will not pass through the check
'if (playback + capture != 1)', avoiding the leftover use of
'codec_dai'.
Fixes: 467fece ("ASoC: soc-dai: move snd_soc_dai_stream_valid() to soc-dai.c")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-compress.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c
index 36060800e9bd..b3c64f87e054 100644
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -535,12 +535,14 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num)
}
/* check client and interface hw capabilities */
- if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
- snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
- playback = 1;
- if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
- snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
- capture = 1;
+ if (codec_dai) {
+ if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
+ playback = 1;
+ if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
+ capture = 1;
+ }
/*
* Compress devices are unidirectional so only one of the directions
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 3a3ee71bd8e14c5e852c71f317eebfda8f88dff0 ]
All DSI PHY/PLL drivers were referencing their VCO parent clock by a
global name, most of which don't exist or have been renamed. These
clock drivers seem to function fine without that except the 14nm driver
for sdm6xx [1].
At the same time all DTs provide a "ref" clock as per the requirements
of dsi-phy-common.yaml, but the clock is never used. This patchset puts
that clock to use without relying on a global clock name, so that all
dependencies are explicitly defined in DT (the firmware) in the end.
Note that this patch intentionally breaks older firmware (DT) that
relies on the clock to be found globally instead. The only affected
platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is
left in place to accommodate a more graceful transition period. All
other platforms had the "ref" clock added to their phy node since its
inception, or in a followup patch some time after. These patches
wrongly assumed that the "ref" clock was actively used and have hence
been listed as "Fixes:" below.
Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of
27MHz pxo clock, which has been addressed in [3].
It is expected that both [2] and [3] are applied to the tree well in
advance of this patch such that any actual breakage is extremely
unlikely, but might still occur if kernel upgrades are performed without
the DT to match. After some time the fallback for msm8974 can be
removed again as well.
[1]: https://lore.kernel.org/linux-arm-msm/[email protected]/
[2]: https://lore.kernel.org/linux-arm-msm/[email protected]/
[3]: https://lore.kernel.org/linux-arm-msm/[email protected]/
Fixes: 79e51645a1dd ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY")
Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
Fixes: 0c0e72705a33 ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 4 +++-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 +++-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 4 +++-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 +++-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 4 +++-
5 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
index d8128f50b0dd..0b782cc18b3f 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
@@ -562,7 +562,9 @@ static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm, struct clk_hw **prov
char clk_name[32], parent[32], vco_name[32];
char parent2[32], parent3[32], parent4[32];
struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "ref",
+ },
.num_parents = 1,
.name = vco_name,
.flags = CLK_IGNORE_UNUSED,
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 5b4e991f220d..1c1e9861b93f 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -804,7 +804,9 @@ static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm, struct clk_hw **prov
{
char clk_name[32], parent[32], vco_name[32];
struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "ref",
+ },
.num_parents = 1,
.name = vco_name,
.flags = CLK_IGNORE_UNUSED,
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index 2da673a2add6..48eab80b548e 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -521,7 +521,9 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
{
char clk_name[32], parent1[32], parent2[32], vco_name[32];
struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "ref", .name = "xo",
+ },
.num_parents = 1,
.name = vco_name,
.flags = CLK_IGNORE_UNUSED,
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
index 71ed4aa0dc67..fc56cdcc9ad6 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -385,7 +385,9 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
{
char *clk_name, *parent_name, *vco_name;
struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "pxo" },
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "ref",
+ },
.num_parents = 1,
.flags = CLK_IGNORE_UNUSED,
.ops = &clk_ops_dsi_pll_28nm_vco,
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index cb297b08458e..9f7c408325ba 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -590,7 +590,9 @@ static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm, struct clk_hw **provide
char clk_name[32], parent[32], vco_name[32];
char parent2[32], parent3[32], parent4[32];
struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "bi_tcxo" },
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "ref",
+ },
.num_parents = 1,
.name = vco_name,
.flags = CLK_IGNORE_UNUSED,
--
2.34.1
From: Dongliang Mu <[email protected]>
[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ]
hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:
hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425
usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
__device_release_driver drivers/base/dd.c:1206 [inline]
device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237
bus_remove_device+0x108/0x160 drivers/base/bus.c:529
device_del+0x1fe/0x510 drivers/base/core.c:3592
usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228
Fix this by moving the initialization of dev->worker to the starting of
hdpvr_register_videodev
Reported-by: syzkaller <[email protected]>
Signed-off-by: Dongliang Mu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/hdpvr/hdpvr-video.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index 563128d11731..60e57e0f1927 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -308,7 +308,6 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
dev->status = STATUS_STREAMING;
- INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
schedule_work(&dev->worker);
v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
@@ -1165,6 +1164,9 @@ int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent,
bool ac3 = dev->flags & HDPVR_FLAG_AC3_CAP;
int res;
+ // initialize dev->worker
+ INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
+
dev->cur_std = V4L2_STD_525_60;
dev->width = 720;
dev->height = 480;
--
2.34.1
From: Stefano Garzarella <[email protected]>
[ Upstream commit c1011c0b3a9c8d2065f425407475cbcc812540b7 ]
Complete the driver configuration, reading the negotiated features,
before using the VQs in the virtio_vsock_probe().
Fixes: 53efbba12cc7 ("virtio/vsock: enable SEQPACKET for transport")
Suggested-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/virtio_transport.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index fb1b8f99f679..4a8548bdf86c 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -622,6 +622,9 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
INIT_WORK(&vsock->event_work, virtio_transport_event_work);
INIT_WORK(&vsock->send_pkt_work, virtio_transport_send_pkt_work);
+ if (virtio_has_feature(vdev, VIRTIO_VSOCK_F_SEQPACKET))
+ vsock->seqpacket_allow = true;
+
vdev->priv = vsock;
mutex_lock(&vsock->tx_lock);
@@ -638,9 +641,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
vsock->event_run = true;
mutex_unlock(&vsock->event_lock);
- if (virtio_has_feature(vdev, VIRTIO_VSOCK_F_SEQPACKET))
- vsock->seqpacket_allow = true;
-
rcu_assign_pointer(the_virtio_vsock, vsock);
mutex_unlock(&the_virtio_vsock_mutex);
--
2.34.1
From: Zheyu Ma <[email protected]>
[ Upstream commit 4f01d09b2bbfbcb47b3eb305560a7f4857a32260 ]
When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_write+0x454/0x5b0
Call Trace:
vfs_write+0x291/0xd60
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_write+0xce/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by removing the open-coded endianness fixup-code.
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 21 ++++-----------------
1 file changed, 4 insertions(+), 17 deletions(-)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1119,7 +1119,7 @@ static ssize_t smtcfb_write(struct fb_in
count = total_size - p;
}
- buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL);
+ buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
@@ -1137,24 +1137,11 @@ static ssize_t smtcfb_write(struct fb_in
break;
}
- for (i = c >> 2; i--;) {
- fb_writel(big_swap(*src), dst++);
+ for (i = (c + 3) >> 2; i--;) {
+ fb_writel(big_swap(*src), dst);
+ dst++;
src++;
}
- if (c & 3) {
- u8 *src8 = (u8 *)src;
- u8 __iomem *dst8 = (u8 __iomem *)dst;
-
- for (i = c & 3; i--;) {
- if (i & 1) {
- fb_writeb(*src8++, ++dst8);
- } else {
- fb_writeb(*src8++, --dst8);
- dst8 += 2;
- }
- }
- dst = (u32 __iomem *)dst8;
- }
*ppos += c;
buf += c;
From: Damien Le Moal <[email protected]>
[ Upstream commit 970404cc5744b1033b6ee601be4ef0e2d1fbcf72 ]
Make sure that the __le32 fields of struct ssp_ini_io_start_req are
manipulated after applying the correct endian conversion. That is, use
cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field
value. In particular, make sure that the calculations for the 4G boundary
check are done using CPU endianness and *not* little endian values. With
these fixes, many sparse warnings are removed.
While at it, add blank lines after variable declarations and in some other
places to make this code more readable.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 41 +++++++++++++++++++-------------
1 file changed, 25 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index e606a9b1c3af..d7a27627fce0 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4381,13 +4381,15 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
struct ssp_ini_io_start_req ssp_cmd;
u32 tag = ccb->ccb_tag;
int ret;
- u64 phys_addr, start_addr, end_addr;
+ u64 phys_addr, end_addr;
u32 end_addr_high, end_addr_low;
struct inbound_queue_table *circularQ;
u32 q_index, cpu_id;
u32 opc = OPC_INB_SSPINIIOSTART;
+
memset(&ssp_cmd, 0, sizeof(ssp_cmd));
memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+
/* data address domain added for spcv; set to 0 by host,
* used internally by controller
* 0 for SAS 1.1 and SAS 2.0 compatible TLR
@@ -4398,7 +4400,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
ssp_cmd.tag = cpu_to_le32(tag);
if (task->ssp_task.enable_first_burst)
- ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+ ssp_cmd.ssp_iu.efb_prio_attr = 0x80;
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
@@ -4430,21 +4432,24 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
+
ssp_cmd.enc_addr_low =
cpu_to_le32(lower_32_bits(dma_addr));
ssp_cmd.enc_addr_high =
cpu_to_le32(upper_32_bits(dma_addr));
ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.enc_esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + ssp_cmd.enc_len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
- if (end_addr_high != ssp_cmd.enc_addr_high) {
+ end_addr = dma_addr + le32_to_cpu(ssp_cmd.enc_len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+
+ if (end_addr_high != le32_to_cpu(ssp_cmd.enc_addr_high)) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, ssp_cmd.enc_len,
+ dma_addr,
+ le32_to_cpu(ssp_cmd.enc_len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
@@ -4453,7 +4458,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
cpu_to_le32(lower_32_bits(phys_addr));
ssp_cmd.enc_addr_high =
cpu_to_le32(upper_32_bits(phys_addr));
- ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+ ssp_cmd.enc_esgl = cpu_to_le32(1U<<31);
}
} else if (task->num_scatter == 0) {
ssp_cmd.enc_addr_low = 0;
@@ -4461,8 +4466,10 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.enc_esgl = 0;
}
+
/* XTS mode. All other fields are 0 */
- ssp_cmd.key_cmode = 0x6 << 4;
+ ssp_cmd.key_cmode = cpu_to_le32(0x6 << 4);
+
/* set tweak values. Should be the start lba */
ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cmd->cmnd[2] << 24) |
(task->ssp_task.cmd->cmnd[3] << 16) |
@@ -4484,20 +4491,22 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.esgl = cpu_to_le32(1<<31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
+
ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
ssp_cmd.addr_high =
cpu_to_le32(upper_32_bits(dma_addr));
ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + ssp_cmd.len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
- if (end_addr_high != ssp_cmd.addr_high) {
+ end_addr = dma_addr + le32_to_cpu(ssp_cmd.len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+ if (end_addr_high != le32_to_cpu(ssp_cmd.addr_high)) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, ssp_cmd.len,
+ dma_addr,
+ le32_to_cpu(ssp_cmd.len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
--
2.34.1
From: David Heidelberg <[email protected]>
[ Upstream commit 6f7e221e7a5cfc3299616543fce42b36e631497b ]
IRQ types blindly copied from very similar APQ8064.
Fixes warnings as:
WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120
...
Tested-by: LogicalErzor <[email protected]> # boot-tested on Samsung S3
Signed-off-by: David Heidelberg <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-msm8960.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..c197927e7435 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -146,7 +146,9 @@
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
regulators {
@@ -192,7 +194,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
- interrupts = <0 154 0x0>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -318,7 +320,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x16080000 0x1000>;
- interrupts = <0 147 0>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <24000000>;
cs-gpios = <&msmgpio 8 0>;
--
2.34.1
From: Miquel Raynal <[email protected]>
commit 0e7f1b557974ce297e5e4c9d4245720fbb489886 upstream.
The controller properties should be in the controller 'parent' node,
while properties in the children nodes are specific to the NAND
*chip*. This error was already present during the yaml conversion.
Fixes: 2d472aba15ff ("mtd: nand: document the NAND controller/NAND chip DT representation")
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -184,7 +184,7 @@ examples:
nand-use-soft-ecc-engine;
nand-ecc-algo = "bch";
- /* controller specific properties */
+ /* NAND chip specific properties */
};
nand@1 {
From: Hans de Goede <[email protected]>
[ Upstream commit a47ac019e7e8129b93a0b991e04b2a59872e053d ]
The mma8452_driver declares both of_match_table and i2c_driver.id_table
match-tables, but its probe() function only checked for of matches.
Add support for i2c_device_id matches. This fixes the driver not loading
on some x86 tablets (e.g. the Nextbook Ares 8) where the i2c_client is
instantiated by platform code using an i2c_device_id.
Drop of_match_ptr() protection to avoid unused warning.
Fixes: c3cdd6e48e35 ("iio: mma8452: refactor for seperating chip specific data")
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/accel/mma8452.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 09c7f10fefb6..21a99467f364 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -176,6 +176,7 @@ static const struct mma8452_event_regs trans_ev_regs = {
* @enabled_events: event flags enabled and handled by this driver
*/
struct mma_chip_info {
+ const char *name;
u8 chip_id;
const struct iio_chan_spec *channels;
int num_channels;
@@ -1301,6 +1302,7 @@ enum {
static const struct mma_chip_info mma_chip_info_table[] = {
[mma8451] = {
+ .name = "mma8451",
.chip_id = MMA8451_DEVICE_ID,
.channels = mma8451_channels,
.num_channels = ARRAY_SIZE(mma8451_channels),
@@ -1325,6 +1327,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
MMA8452_INT_FF_MT,
},
[mma8452] = {
+ .name = "mma8452",
.chip_id = MMA8452_DEVICE_ID,
.channels = mma8452_channels,
.num_channels = ARRAY_SIZE(mma8452_channels),
@@ -1341,6 +1344,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
MMA8452_INT_FF_MT,
},
[mma8453] = {
+ .name = "mma8453",
.chip_id = MMA8453_DEVICE_ID,
.channels = mma8453_channels,
.num_channels = ARRAY_SIZE(mma8453_channels),
@@ -1357,6 +1361,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
MMA8452_INT_FF_MT,
},
[mma8652] = {
+ .name = "mma8652",
.chip_id = MMA8652_DEVICE_ID,
.channels = mma8652_channels,
.num_channels = ARRAY_SIZE(mma8652_channels),
@@ -1366,6 +1371,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
.enabled_events = MMA8452_INT_FF_MT,
},
[mma8653] = {
+ .name = "mma8653",
.chip_id = MMA8653_DEVICE_ID,
.channels = mma8653_channels,
.num_channels = ARRAY_SIZE(mma8653_channels),
@@ -1380,6 +1386,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
.enabled_events = MMA8452_INT_FF_MT,
},
[fxls8471] = {
+ .name = "fxls8471",
.chip_id = FXLS8471_DEVICE_ID,
.channels = mma8451_channels,
.num_channels = ARRAY_SIZE(mma8451_channels),
@@ -1522,13 +1529,6 @@ static int mma8452_probe(struct i2c_client *client,
struct mma8452_data *data;
struct iio_dev *indio_dev;
int ret;
- const struct of_device_id *match;
-
- match = of_match_device(mma8452_dt_ids, &client->dev);
- if (!match) {
- dev_err(&client->dev, "unknown device model\n");
- return -ENODEV;
- }
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
@@ -1537,7 +1537,14 @@ static int mma8452_probe(struct i2c_client *client,
data = iio_priv(indio_dev);
data->client = client;
mutex_init(&data->lock);
- data->chip_info = match->data;
+
+ data->chip_info = device_get_match_data(&client->dev);
+ if (!data->chip_info && id) {
+ data->chip_info = &mma_chip_info_table[id->driver_data];
+ } else {
+ dev_err(&client->dev, "unknown device model\n");
+ return -ENODEV;
+ }
data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(data->vdd_reg))
@@ -1581,11 +1588,11 @@ static int mma8452_probe(struct i2c_client *client,
}
dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
- match->compatible, data->chip_info->chip_id);
+ data->chip_info->name, data->chip_info->chip_id);
i2c_set_clientdata(client, indio_dev);
indio_dev->info = &mma8452_info;
- indio_dev->name = id->name;
+ indio_dev->name = data->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = data->chip_info->channels;
indio_dev->num_channels = data->chip_info->num_channels;
@@ -1810,7 +1817,7 @@ MODULE_DEVICE_TABLE(i2c, mma8452_id);
static struct i2c_driver mma8452_driver = {
.driver = {
.name = "mma8452",
- .of_match_table = of_match_ptr(mma8452_dt_ids),
+ .of_match_table = mma8452_dt_ids,
.pm = &mma8452_pm_ops,
},
.probe = mma8452_probe,
--
2.34.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 0401f24cd238ae200a23a13925f98de3d2c883b8 ]
When a driver calls pwmchip_add() it has to be prepared to immediately
get its callbacks called. So move allocation of driver data and hardware
initialization before the call to pwmchip_add().
This fixes a potential NULL pointer exception and a race condition on
register writes.
Fixes: 841e6f90bb78 ("pwm: NXP LPC18xx PWM/SCT driver")
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-lpc18xx-sct.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
index 8e461f3baa05..8cc8ae16553c 100644
--- a/drivers/pwm/pwm-lpc18xx-sct.c
+++ b/drivers/pwm/pwm-lpc18xx-sct.c
@@ -395,12 +395,6 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_LIMIT,
BIT(lpc18xx_pwm->period_event));
- ret = pwmchip_add(&lpc18xx_pwm->chip);
- if (ret < 0) {
- dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
- goto disable_pwmclk;
- }
-
for (i = 0; i < lpc18xx_pwm->chip.npwm; i++) {
struct lpc18xx_pwm_data *data;
@@ -410,14 +404,12 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
- goto remove_pwmchip;
+ goto disable_pwmclk;
}
pwm_set_chip_data(pwm, data);
}
- platform_set_drvdata(pdev, lpc18xx_pwm);
-
val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
val &= ~LPC18XX_PWM_BIDIR;
val &= ~LPC18XX_PWM_CTRL_HALT;
@@ -425,10 +417,16 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
val |= LPC18XX_PWM_PRE(0);
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val);
+ ret = pwmchip_add(&lpc18xx_pwm->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
+ goto disable_pwmclk;
+ }
+
+ platform_set_drvdata(pdev, lpc18xx_pwm);
+
return 0;
-remove_pwmchip:
- pwmchip_remove(&lpc18xx_pwm->chip);
disable_pwmclk:
clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
return ret;
--
2.34.1
From: Ming Qian <[email protected]>
[ Upstream commit 97558d170a1236280407e8d29a7d095d2c2ed554 ]
When error occurs in parsing jpeg, the slot isn't acquired yet, it may
be the default value MXC_MAX_SLOTS.
If the driver access the slot using the incorrect slot number, it will
access array out of bounds.
The result is the driver will change num_domains, which follows
slot_data in struct mxc_jpeg_dev.
Then the driver won't detach the pm domain at rmmod, which will lead to
kernel panic when trying to insmod again.
Signed-off-by: Ming Qian <[email protected]>
Reviewed-by: Mirela Rabulea <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/imx-jpeg/mxc-jpeg.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/media/platform/imx-jpeg/mxc-jpeg.c b/drivers/media/platform/imx-jpeg/mxc-jpeg.c
index 637d73f5f4a2..37905547466b 100644
--- a/drivers/media/platform/imx-jpeg/mxc-jpeg.c
+++ b/drivers/media/platform/imx-jpeg/mxc-jpeg.c
@@ -932,7 +932,6 @@ static void mxc_jpeg_device_run(void *priv)
jpeg_src_buf->jpeg_parse_error = true;
}
if (jpeg_src_buf->jpeg_parse_error) {
- jpeg->slot_data[ctx->slot].used = false;
v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
--
2.34.1
From: Abhishek Sahu <[email protected]>
[ Upstream commit eadf88ecf6ac7d6a9f47a76c6055d9a1987a8991 ]
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then
the current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition.
For saving the PCI state locally, pci_store_saved_state() is being
used and the pci_load_and_free_saved_state() will free the allocated
memory.
But for reset related IOCTLs, vfio driver calls PCI reset-related
API's which will internally change the PCI power state back to D0. So,
when the guest resumes, then it will get the current state as D0 and it
will skip the call to vfio_pci_set_power_state() for changing the
power state to D0 explicitly. In this case, the memory pointed by
'pm_save' will never be freed. In a malicious sequence, the state changing
to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be
run in a loop and it can cause an OOM situation.
This patch frees the earlier allocated memory first before overwriting
'pm_save' to prevent the mentioned memory leak.
Fixes: 51ef3a004b1e ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/pci/vfio_pci_core.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index a03b5a99c2da..0c63091cc848 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -228,6 +228,19 @@ int vfio_pci_set_power_state(struct vfio_pci_core_device *vdev, pci_power_t stat
if (!ret) {
/* D3 might be unsupported via quirk, skip unless in D3 */
if (needs_save && pdev->current_state >= PCI_D3hot) {
+ /*
+ * The current PCI state will be saved locally in
+ * 'pm_save' during the D3hot transition. When the
+ * device state is changed to D0 again with the current
+ * function, then pci_store_saved_state() will restore
+ * the state and will free the memory pointed by
+ * 'pm_save'. There are few cases where the PCI power
+ * state can be changed to D0 without the involvement
+ * of the driver. For these cases, free the earlier
+ * allocated memory first before overwriting 'pm_save'
+ * to prevent the memory leak.
+ */
+ kfree(vdev->pm_save);
vdev->pm_save = pci_store_saved_state(pdev);
} else if (needs_restore) {
pci_load_and_free_saved_state(pdev, &vdev->pm_save);
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 08be6b13db23f68146c600dd5adfd92e99d9ec6e ]
Fix build errors when PTP_1588_CLOCK=m and SPARX5_SWTICH=y.
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.o: in function `sparx5_get_ts_info':
sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index'
arc-linux-ld: sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_init':
sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register'
arc-linux-ld: sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_deinit':
sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf38): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf46): undefined reference to `ptp_clock_unregister'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o:sparx5_ptp.c:(.text+0xf46): more undefined references to `ptp_clock_unregister' follow
Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Horatiu Vultur <[email protected]>
Cc: [email protected]
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Steen Hegelund <[email protected]>
Cc: Bjarni Jonasson <[email protected]>
Cc: Lars Povlsen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/microchip/sparx5/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/microchip/sparx5/Kconfig b/drivers/net/ethernet/microchip/sparx5/Kconfig
index 7bdbb2d09a14..85b24edb65d5 100644
--- a/drivers/net/ethernet/microchip/sparx5/Kconfig
+++ b/drivers/net/ethernet/microchip/sparx5/Kconfig
@@ -4,6 +4,7 @@ config SPARX5_SWITCH
depends on HAS_IOMEM
depends on OF
depends on ARCH_SPARX5 || COMPILE_TEST
+ depends on PTP_1588_CLOCK_OPTIONAL
select PHYLINK
select PHY_SPARX5_SERDES
select RESET_CONTROLLER
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 5b3dc949f554379edcb8ef6111aa5ecb78feb798 ]
A successful ida_simple_get() should be balanced by a corresponding
ida_simple_remove().
Add the missing call in the error handling path of the probe.
While at it, switch to ida_alloc()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Fixes: 4f556bc04e3c ("misc: cardreader: add new Alcor Micro Cardreader PCI driver")
Reviewed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/918a9875b7f67b7f8f123c4446452603422e8c5e.1644136776.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/cardreader/alcor_pci.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/cardreader/alcor_pci.c b/drivers/misc/cardreader/alcor_pci.c
index de6d44a158bb..3f514d77a843 100644
--- a/drivers/misc/cardreader/alcor_pci.c
+++ b/drivers/misc/cardreader/alcor_pci.c
@@ -266,7 +266,7 @@ static int alcor_pci_probe(struct pci_dev *pdev,
if (!priv)
return -ENOMEM;
- ret = ida_simple_get(&alcor_pci_idr, 0, 0, GFP_KERNEL);
+ ret = ida_alloc(&alcor_pci_idr, GFP_KERNEL);
if (ret < 0)
return ret;
priv->id = ret;
@@ -280,7 +280,8 @@ static int alcor_pci_probe(struct pci_dev *pdev,
ret = pci_request_regions(pdev, DRV_NAME_ALCOR_PCI);
if (ret) {
dev_err(&pdev->dev, "Cannot request region\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error_free_ida;
}
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
@@ -324,6 +325,8 @@ static int alcor_pci_probe(struct pci_dev *pdev,
error_release_regions:
pci_release_regions(pdev);
+error_free_ida:
+ ida_free(&alcor_pci_idr, priv->id);
return ret;
}
@@ -337,7 +340,7 @@ static void alcor_pci_remove(struct pci_dev *pdev)
mfd_remove_devices(&pdev->dev);
- ida_simple_remove(&alcor_pci_idr, priv->id);
+ ida_free(&alcor_pci_idr, priv->id);
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 89388f8730699c259f8090ec435fb43569efe4ac ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes: 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-rockchip.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index dc52da94af0b..923ff21a44c0 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -2702,6 +2702,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
node = of_parse_phandle(np, "rockchip,grf", 0);
if (node) {
info->regmap_base = syscon_node_to_regmap(node);
+ of_node_put(node);
if (IS_ERR(info->regmap_base))
return PTR_ERR(info->regmap_base);
} else {
@@ -2738,6 +2739,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
node = of_parse_phandle(np, "rockchip,pmu", 0);
if (node) {
info->regmap_pmu = syscon_node_to_regmap(node);
+ of_node_put(node);
if (IS_ERR(info->regmap_pmu))
return PTR_ERR(info->regmap_pmu);
}
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 4adc33f36d80489339f1b43dfeee96bb9ea8e459 ]
The current code assumes that the RGB444 and YUV444 formats are the
same, but the HDMI 2.0 specification states that:
The three DC_XXbit bits above only indicate support for RGB 4:4:4 at
that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is
indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4
is supported for all modes indicated by the DC_XXbit flags.
So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444
flag isn't, we'll assume that we support that deep colour mode for
YUV444 which breaks the specification.
In order to fix this, let's split the edid_hdmi_dc_modes field in struct
drm_display_info into two fields, one for RGB444 and one for YUV444.
Suggested-by: Ville Syrjälä <[email protected]>
Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 2 +-
drivers/gpu/drm/drm_edid.c | 7 ++++---
drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++--
drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
include/drm/drm_connector.h | 12 +++++++++---
5 files changed, 17 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -175,7 +175,7 @@ int amdgpu_connector_get_monitor_bpc(str
/* Check if bpc is within clock limit. Try to degrade gracefully otherwise */
if ((bpc == 12) && (mode_clock * 3/2 > max_tmds_clock)) {
- if ((connector->display_info.edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_30) &&
+ if ((connector->display_info.edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30) &&
(mode_clock * 5/4 <= max_tmds_clock))
bpc = 10;
else
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5004,21 +5004,21 @@ static void drm_parse_hdmi_deep_color_in
if (hdmi[6] & DRM_EDID_HDMI_DC_30) {
dc_bpc = 10;
- info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_30;
+ info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_30;
DRM_DEBUG("%s: HDMI sink does deep color 30.\n",
connector->name);
}
if (hdmi[6] & DRM_EDID_HDMI_DC_36) {
dc_bpc = 12;
- info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_36;
+ info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_36;
DRM_DEBUG("%s: HDMI sink does deep color 36.\n",
connector->name);
}
if (hdmi[6] & DRM_EDID_HDMI_DC_48) {
dc_bpc = 16;
- info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_48;
+ info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_48;
DRM_DEBUG("%s: HDMI sink does deep color 48.\n",
connector->name);
}
@@ -5035,6 +5035,7 @@ static void drm_parse_hdmi_deep_color_in
/* YCRCB444 is optional according to spec. */
if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
+ info->edid_hdmi_ycbcr444_dc_modes = info->edid_hdmi_rgb444_dc_modes;
DRM_DEBUG("%s: HDMI sink does YCRCB444 in deep color.\n",
connector->name);
}
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1892,7 +1892,7 @@ static bool intel_hdmi_bpc_possible(stru
if (ycbcr420_output)
return hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36;
else
- return info->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_36;
+ return info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36;
case 10:
if (DISPLAY_VER(i915) < 11)
return false;
@@ -1903,7 +1903,7 @@ static bool intel_hdmi_bpc_possible(stru
if (ycbcr420_output)
return hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_30;
else
- return info->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_30;
+ return info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30;
case 8:
return true;
default:
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -204,7 +204,7 @@ int radeon_get_monitor_bpc(struct drm_co
/* Check if bpc is within clock limit. Try to degrade gracefully otherwise */
if ((bpc == 12) && (mode_clock * 3/2 > max_tmds_clock)) {
- if ((connector->display_info.edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_30) &&
+ if ((connector->display_info.edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30) &&
(mode_clock * 5/4 <= max_tmds_clock))
bpc = 10;
else
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -566,10 +566,16 @@ struct drm_display_info {
bool rgb_quant_range_selectable;
/**
- * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even
- * more stuff redundant with @bus_formats.
+ * @edid_hdmi_dc_rgb444_modes: Mask of supported hdmi deep color modes
+ * in RGB 4:4:4. Even more stuff redundant with @bus_formats.
*/
- u8 edid_hdmi_dc_modes;
+ u8 edid_hdmi_rgb444_dc_modes;
+
+ /**
+ * @edid_hdmi_dc_ycbcr444_modes: Mask of supported hdmi deep color
+ * modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats.
+ */
+ u8 edid_hdmi_ycbcr444_dc_modes;
/**
* @cea_rev: CEA revision of the HDMI sink.
From: Christophe Leroy <[email protected]>
[ Upstream commit 2f293651eca3eacaeb56747dede31edace7329d2 ]
Trying to build livepatch on powerpc/32 results in:
kernel/livepatch/core.c: In function 'klp_resolve_symbols':
kernel/livepatch/core.c:221:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
221 | sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
| ^
kernel/livepatch/core.c:221:21: error: assignment to 'Elf32_Sym *' {aka 'struct elf32_sym *'} from incompatible pointer type 'Elf64_Sym *' {aka 'struct elf64_sym *'} [-Werror=incompatible-pointer-types]
221 | sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
| ^
kernel/livepatch/core.c: In function 'klp_apply_section_relocs':
kernel/livepatch/core.c:312:35: error: passing argument 1 of 'klp_resolve_symbols' from incompatible pointer type [-Werror=incompatible-pointer-types]
312 | ret = klp_resolve_symbols(sechdrs, strtab, symndx, sec, sec_objname);
| ^~~~~~~
| |
| Elf32_Shdr * {aka struct elf32_shdr *}
kernel/livepatch/core.c:193:44: note: expected 'Elf64_Shdr *' {aka 'struct elf64_shdr *'} but argument is of type 'Elf32_Shdr *' {aka 'struct elf32_shdr *'}
193 | static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
| ~~~~~~~~~~~~^~~~~~~
Fix it by using the right types instead of forcing 64 bits types.
Fixes: 7c8e2bdd5f0d ("livepatch: Apply vmlinux-specific KLP relocations early")
Signed-off-by: Christophe Leroy <[email protected]>
Acked-by: Petr Mladek <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Acked-by: Miroslav Benes <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/5288e11b018a762ea3351cc8fb2d4f15093a4457.1640017960.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/livepatch/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
index 335d988bd811..c0789383807b 100644
--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -190,7 +190,7 @@ static int klp_find_object_symbol(const char *objname, const char *name,
return -EINVAL;
}
-static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
+static int klp_resolve_symbols(Elf_Shdr *sechdrs, const char *strtab,
unsigned int symndx, Elf_Shdr *relasec,
const char *sec_objname)
{
@@ -218,7 +218,7 @@ static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
relas = (Elf_Rela *) relasec->sh_addr;
/* For each rela in this klp relocation section */
for (i = 0; i < relasec->sh_size / sizeof(Elf_Rela); i++) {
- sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
+ sym = (Elf_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
if (sym->st_shndx != SHN_LIVEPATCH) {
pr_err("symbol %s is not marked as a livepatch symbol\n",
strtab + sym->st_name);
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
commit 40d8abf364bcab23bc715a9221a3c8623956257b upstream.
If the NumEntries field in the _CPC return package is less than 2, do
not attempt to access the "Revision" element of that package, because
it may not be present then.
Fixes: 337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC")
BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/cppc_acpi.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -703,6 +703,11 @@ int acpi_cppc_processor_probe(struct acp
cpc_obj = &out_obj->package.elements[0];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
num_ent = cpc_obj->integer.value;
+ if (num_ent <= 1) {
+ pr_debug("Unexpected _CPC NumEntries value (%d) for CPU:%d\n",
+ num_ent, pr->id);
+ goto out_free;
+ }
} else {
pr_debug("Unexpected entry type(%d) for NumEntries\n",
cpc_obj->type);
From: David Stevens <[email protected]>
commit e81e99bacc9f9347bda7808a949c1ce9fcc2bbf4 upstream.
Add an argument to swiotlb_tbl_map_single that specifies the desired
alignment of the allocated buffer. This is used by dma-iommu to ensure
the buffer is aligned to the iova granule size when using swiotlb with
untrusted sub-granule mappings. This addresses an issue where adjacent
slots could be exposed to the untrusted device if IO_TLB_SIZE < iova
granule < PAGE_SIZE.
Signed-off-by: David Stevens <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Cc: Mario Limonciello <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/dma-iommu.c | 4 ++--
drivers/xen/swiotlb-xen.c | 2 +-
include/linux/swiotlb.h | 3 ++-
kernel/dma/swiotlb.c | 13 ++++++++-----
4 files changed, 13 insertions(+), 9 deletions(-)
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -818,8 +818,8 @@ static dma_addr_t iommu_dma_map_page(str
size_t padding_size;
aligned_size = iova_align(iovad, size);
- phys = swiotlb_tbl_map_single(dev, phys, size,
- aligned_size, dir, attrs);
+ phys = swiotlb_tbl_map_single(dev, phys, size, aligned_size,
+ iova_mask(iovad), dir, attrs);
if (phys == DMA_MAPPING_ERROR)
return DMA_MAPPING_ERROR;
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -380,7 +380,7 @@ static dma_addr_t xen_swiotlb_map_page(s
*/
trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
- map = swiotlb_tbl_map_single(dev, phys, size, size, dir, attrs);
+ map = swiotlb_tbl_map_single(dev, phys, size, size, 0, dir, attrs);
if (map == (phys_addr_t)DMA_MAPPING_ERROR)
return DMA_MAPPING_ERROR;
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -45,7 +45,8 @@ extern void __init swiotlb_update_mem_at
phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, phys_addr_t phys,
size_t mapping_size, size_t alloc_size,
- enum dma_data_direction dir, unsigned long attrs);
+ unsigned int alloc_aligned_mask, enum dma_data_direction dir,
+ unsigned long attrs);
extern void swiotlb_tbl_unmap_single(struct device *hwdev,
phys_addr_t tlb_addr,
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -459,7 +459,7 @@ static unsigned int wrap_index(struct io
* allocate a buffer from that IO TLB pool.
*/
static int swiotlb_find_slots(struct device *dev, phys_addr_t orig_addr,
- size_t alloc_size)
+ size_t alloc_size, unsigned int alloc_align_mask)
{
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
unsigned long boundary_mask = dma_get_seg_boundary(dev);
@@ -483,6 +483,7 @@ static int swiotlb_find_slots(struct dev
stride = (iotlb_align_mask >> IO_TLB_SHIFT) + 1;
if (alloc_size >= PAGE_SIZE)
stride = max(stride, stride << (PAGE_SHIFT - IO_TLB_SHIFT));
+ stride = max(stride, (alloc_align_mask >> IO_TLB_SHIFT) + 1);
spin_lock_irqsave(&mem->lock, flags);
if (unlikely(nslots > mem->nslabs - mem->used))
@@ -541,7 +542,8 @@ found:
phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
size_t mapping_size, size_t alloc_size,
- enum dma_data_direction dir, unsigned long attrs)
+ unsigned int alloc_align_mask, enum dma_data_direction dir,
+ unsigned long attrs)
{
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
unsigned int offset = swiotlb_align_offset(dev, orig_addr);
@@ -561,7 +563,8 @@ phys_addr_t swiotlb_tbl_map_single(struc
return (phys_addr_t)DMA_MAPPING_ERROR;
}
- index = swiotlb_find_slots(dev, orig_addr, alloc_size + offset);
+ index = swiotlb_find_slots(dev, orig_addr,
+ alloc_size + offset, alloc_align_mask);
if (index == -1) {
if (!(attrs & DMA_ATTR_NO_WARN))
dev_warn_ratelimited(dev,
@@ -680,7 +683,7 @@ dma_addr_t swiotlb_map(struct device *de
trace_swiotlb_bounced(dev, phys_to_dma(dev, paddr), size,
swiotlb_force);
- swiotlb_addr = swiotlb_tbl_map_single(dev, paddr, size, size, dir,
+ swiotlb_addr = swiotlb_tbl_map_single(dev, paddr, size, size, 0, dir,
attrs);
if (swiotlb_addr == (phys_addr_t)DMA_MAPPING_ERROR)
return DMA_MAPPING_ERROR;
@@ -764,7 +767,7 @@ struct page *swiotlb_alloc(struct device
if (!mem)
return NULL;
- index = swiotlb_find_slots(dev, 0, size);
+ index = swiotlb_find_slots(dev, 0, size, 0);
if (index == -1)
return NULL;
From: Johannes Berg <[email protected]>
[ Upstream commit 1f2c104448477512fcf7296df54bfbc3a6f9a765 ]
If we're limiting bandwidth for some reason such as regulatory
restrictions, then advertise that limitation just like we do
for VHT today, so the AP is aware we cannot use the higher BW
it might be using.
Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.70c8e3e7ee76.If317630de69ff1146bec7d47f5b83038695eb71d@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/ieee80211_i.h | 2 +-
net/mac80211/mesh.c | 2 +-
net/mac80211/mlme.c | 11 ++++++++---
net/mac80211/util.c | 27 ++++++++++++++++++++++-----
4 files changed, 32 insertions(+), 10 deletions(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6a88195e5abe..d30bd21697a3 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -2379,7 +2379,7 @@ u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
u8 *ieee80211_ie_build_vht_oper(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
const struct cfg80211_chan_def *chandef);
u8 ieee80211_ie_len_he_cap(struct ieee80211_sub_if_data *sdata, u8 iftype);
-u8 *ieee80211_ie_build_he_cap(u8 *pos,
+u8 *ieee80211_ie_build_he_cap(u32 disable_flags, u8 *pos,
const struct ieee80211_sta_he_cap *he_cap,
u8 *end);
void ieee80211_ie_build_he_6ghz_cap(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 5dcfd53a4ab6..42bd81a30310 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -580,7 +580,7 @@ int mesh_add_he_cap_ie(struct ieee80211_sub_if_data *sdata,
return -ENOMEM;
pos = skb_put(skb, ie_len);
- ieee80211_ie_build_he_cap(pos, he_cap, pos + ie_len);
+ ieee80211_ie_build_he_cap(0, pos, he_cap, pos + ie_len);
return 0;
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 8d9fe2765836..c8332452c118 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -630,7 +630,7 @@ static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb,
struct ieee80211_supported_band *sband)
{
- u8 *pos;
+ u8 *pos, *pre_he_pos;
const struct ieee80211_sta_he_cap *he_cap = NULL;
struct ieee80211_chanctx_conf *chanctx_conf;
u8 he_cap_size;
@@ -647,16 +647,21 @@ static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
he_cap = ieee80211_get_he_iftype_cap(sband,
ieee80211_vif_type_p2p(&sdata->vif));
- if (!he_cap || !reg_cap)
+ if (!he_cap || !chanctx_conf || !reg_cap)
return;
+ /* get a max size estimate */
he_cap_size =
2 + 1 + sizeof(he_cap->he_cap_elem) +
ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) +
ieee80211_he_ppe_size(he_cap->ppe_thres[0],
he_cap->he_cap_elem.phy_cap_info);
pos = skb_put(skb, he_cap_size);
- ieee80211_ie_build_he_cap(pos, he_cap, pos + he_cap_size);
+ pre_he_pos = pos;
+ pos = ieee80211_ie_build_he_cap(sdata->u.mgd.flags,
+ pos, he_cap, pos + he_cap_size);
+ /* trim excess if any */
+ skb_trim(skb, skb->len - (pre_he_pos + he_cap_size - pos));
ieee80211_ie_build_he_6ghz_cap(sdata, skb);
}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 2fe71ed9137b..be1911d8089f 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1959,7 +1959,7 @@ static int ieee80211_build_preq_ies_band(struct ieee80211_sub_if_data *sdata,
if (he_cap &&
cfg80211_any_usable_channels(local->hw.wiphy, BIT(sband->band),
IEEE80211_CHAN_NO_HE)) {
- pos = ieee80211_ie_build_he_cap(pos, he_cap, end);
+ pos = ieee80211_ie_build_he_cap(0, pos, he_cap, end);
if (!pos)
goto out_err;
}
@@ -2903,10 +2903,11 @@ u8 ieee80211_ie_len_he_cap(struct ieee80211_sub_if_data *sdata, u8 iftype)
he_cap->he_cap_elem.phy_cap_info);
}
-u8 *ieee80211_ie_build_he_cap(u8 *pos,
+u8 *ieee80211_ie_build_he_cap(u32 disable_flags, u8 *pos,
const struct ieee80211_sta_he_cap *he_cap,
u8 *end)
{
+ struct ieee80211_he_cap_elem elem;
u8 n;
u8 ie_len;
u8 *orig_pos = pos;
@@ -2919,7 +2920,23 @@ u8 *ieee80211_ie_build_he_cap(u8 *pos,
if (!he_cap)
return orig_pos;
- n = ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem);
+ /* modify on stack first to calculate 'n' and 'ie_len' correctly */
+ elem = he_cap->he_cap_elem;
+
+ if (disable_flags & IEEE80211_STA_DISABLE_40MHZ)
+ elem.phy_cap_info[0] &=
+ ~(IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G);
+
+ if (disable_flags & IEEE80211_STA_DISABLE_160MHZ)
+ elem.phy_cap_info[0] &=
+ ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+
+ if (disable_flags & IEEE80211_STA_DISABLE_80P80MHZ)
+ elem.phy_cap_info[0] &=
+ ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
+
+ n = ieee80211_he_mcs_nss_size(&elem);
ie_len = 2 + 1 +
sizeof(he_cap->he_cap_elem) + n +
ieee80211_he_ppe_size(he_cap->ppe_thres[0],
@@ -2933,8 +2950,8 @@ u8 *ieee80211_ie_build_he_cap(u8 *pos,
*pos++ = WLAN_EID_EXT_HE_CAPABILITY;
/* Fixed data */
- memcpy(pos, &he_cap->he_cap_elem, sizeof(he_cap->he_cap_elem));
- pos += sizeof(he_cap->he_cap_elem);
+ memcpy(pos, &elem, sizeof(elem));
+ pos += sizeof(elem);
memcpy(pos, &he_cap->he_mcs_nss_supp, n);
pos += n;
--
2.34.1
From: Yu Kuai <[email protected]>
[ Upstream commit 8410f70977734f21b8ed45c37e925d311dfda2e7 ]
Our test report a UAF:
[ 2073.019181] ==================================================================
[ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584
[ 2073.019192]
[ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5
[ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2073.019200] Call trace:
[ 2073.019203] dump_backtrace+0x0/0x310
[ 2073.019206] show_stack+0x28/0x38
[ 2073.019210] dump_stack+0xec/0x15c
[ 2073.019216] print_address_description+0x68/0x2d0
[ 2073.019220] kasan_report+0x238/0x2f0
[ 2073.019224] __asan_store8+0x88/0xb0
[ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019233] bfq_put_async_queues+0xbc/0x208
[ 2073.019236] bfq_pd_offline+0x178/0x238
[ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019244] bfq_exit_queue+0x128/0x178
[ 2073.019249] blk_mq_exit_sched+0x12c/0x160
[ 2073.019252] elevator_exit+0xc8/0xd0
[ 2073.019256] blk_exit_queue+0x50/0x88
[ 2073.019259] blk_cleanup_queue+0x228/0x3d8
[ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019274] null_exit+0x90/0x114 [null_blk]
[ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019282] el0_svc_common+0xc8/0x320
[ 2073.019287] el0_svc_handler+0xf8/0x160
[ 2073.019290] el0_svc+0x10/0x218
[ 2073.019291]
[ 2073.019294] Allocated by task 14163:
[ 2073.019301] kasan_kmalloc+0xe0/0x190
[ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418
[ 2073.019308] bfq_pd_alloc+0x54/0x118
[ 2073.019313] blkcg_activate_policy+0x250/0x460
[ 2073.019317] bfq_create_group_hierarchy+0x38/0x110
[ 2073.019321] bfq_init_queue+0x6d0/0x948
[ 2073.019325] blk_mq_init_sched+0x1d8/0x390
[ 2073.019330] elevator_switch_mq+0x88/0x170
[ 2073.019334] elevator_switch+0x140/0x270
[ 2073.019338] elv_iosched_store+0x1a4/0x2a0
[ 2073.019342] queue_attr_store+0x90/0xe0
[ 2073.019348] sysfs_kf_write+0xa8/0xe8
[ 2073.019351] kernfs_fop_write+0x1f8/0x378
[ 2073.019359] __vfs_write+0xe0/0x360
[ 2073.019363] vfs_write+0xf0/0x270
[ 2073.019367] ksys_write+0xdc/0x1b8
[ 2073.019371] __arm64_sys_write+0x50/0x60
[ 2073.019375] el0_svc_common+0xc8/0x320
[ 2073.019380] el0_svc_handler+0xf8/0x160
[ 2073.019383] el0_svc+0x10/0x218
[ 2073.019385]
[ 2073.019387] Freed by task 72584:
[ 2073.019391] __kasan_slab_free+0x120/0x228
[ 2073.019394] kasan_slab_free+0x10/0x18
[ 2073.019397] kfree+0x94/0x368
[ 2073.019400] bfqg_put+0x64/0xb0
[ 2073.019404] bfqg_and_blkg_put+0x90/0xb0
[ 2073.019408] bfq_put_queue+0x220/0x228
[ 2073.019413] __bfq_put_async_bfqq+0x98/0x168
[ 2073.019416] bfq_put_async_queues+0xbc/0x208
[ 2073.019420] bfq_pd_offline+0x178/0x238
[ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019429] bfq_exit_queue+0x128/0x178
[ 2073.019433] blk_mq_exit_sched+0x12c/0x160
[ 2073.019437] elevator_exit+0xc8/0xd0
[ 2073.019440] blk_exit_queue+0x50/0x88
[ 2073.019443] blk_cleanup_queue+0x228/0x3d8
[ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019459] null_exit+0x90/0x114 [null_blk]
[ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019467] el0_svc_common+0xc8/0x320
[ 2073.019471] el0_svc_handler+0xf8/0x160
[ 2073.019474] el0_svc+0x10/0x218
[ 2073.019475]
[ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00
which belongs to the cache kmalloc-1024 of size 1024
[ 2073.019484] The buggy address is located 552 bytes inside of
1024-byte region [ffff8000ccf63f00, ffff8000ccf64300)
[ 2073.019486] The buggy address belongs to the page:
[ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0
[ 2073.020123] flags: 0x7ffff0000008100(slab|head)
[ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00
[ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[ 2073.020411] page dumped because: kasan: bad access detected
[ 2073.020412]
[ 2073.020414] Memory state around the buggy address:
[ 2073.020420] ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020424] ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020430] ^
[ 2073.020434] ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020438] ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020439] ==================================================================
The same problem exist in mainline as well.
This is because oom_bfqq is moved to a non-root group, thus root_group
is freed earlier.
Thus fix the problem by don't move oom_bfqq.
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Acked-by: Paolo Valente <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-cgroup.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c
index 85b8e1c3a762..e37af3f8a733 100644
--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -644,6 +644,12 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
{
struct bfq_entity *entity = &bfqq->entity;
+ /*
+ * oom_bfqq is not allowed to move, oom_bfqq will hold ref to root_group
+ * until elevator exit.
+ */
+ if (bfqq == &bfqd->oom_bfqq)
+ return;
/*
* Get extra reference to prevent bfqq from being freed in
* next possible expire or deactivate.
--
2.34.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit 5318f70da7e82649d794fc27d8a127c22aa3566e ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 9a1870ce812e ("serial: 8250: don't use slave_id of dma_slave_config")
Depends-on: a13e19cf3dc1 ("serial: 8250_lpss: split LPSS driver to separate module")
Reported-by: Qing Wang <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_lpss.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 848d81e3838c..49ae73f4d3a0 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -121,8 +121,7 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
{
struct dw_dma_slave *param = &lpss->dma_param;
struct pci_dev *pdev = to_pci_dev(port->dev);
- unsigned int dma_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
- struct pci_dev *dma_dev = pci_get_slot(pdev->bus, dma_devfn);
+ struct pci_dev *dma_dev;
switch (pdev->device) {
case PCI_DEVICE_ID_INTEL_BYT_UART1:
@@ -141,6 +140,8 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
return -EINVAL;
}
+ dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
+
param->dma_dev = &dma_dev->dev;
param->m_master = 0;
param->p_master = 1;
@@ -156,6 +157,14 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
return 0;
}
+static void byt_serial_exit(struct lpss8250 *lpss)
+{
+ struct dw_dma_slave *param = &lpss->dma_param;
+
+ /* Paired with pci_get_slot() in the byt_serial_setup() above */
+ put_device(param->dma_dev);
+}
+
static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
{
struct uart_8250_dma *dma = &lpss->data.dma;
@@ -171,6 +180,13 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
return 0;
}
+static void ehl_serial_exit(struct lpss8250 *lpss)
+{
+ struct uart_8250_port *up = serial8250_get_port(lpss->data.line);
+
+ up->dma = NULL;
+}
+
#ifdef CONFIG_SERIAL_8250_DMA
static const struct dw_dma_platform_data qrk_serial_dma_pdata = {
.nr_channels = 2,
@@ -345,8 +361,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return 0;
err_exit:
- if (lpss->board->exit)
- lpss->board->exit(lpss);
+ lpss->board->exit(lpss);
pci_free_irq_vectors(pdev);
return ret;
}
@@ -357,8 +372,7 @@ static void lpss8250_remove(struct pci_dev *pdev)
serial8250_unregister_port(lpss->data.line);
- if (lpss->board->exit)
- lpss->board->exit(lpss);
+ lpss->board->exit(lpss);
pci_free_irq_vectors(pdev);
}
@@ -366,12 +380,14 @@ static const struct lpss8250_board byt_board = {
.freq = 100000000,
.base_baud = 2764800,
.setup = byt_serial_setup,
+ .exit = byt_serial_exit,
};
static const struct lpss8250_board ehl_board = {
.freq = 200000000,
.base_baud = 12500000,
.setup = ehl_serial_setup,
+ .exit = ehl_serial_exit,
};
static const struct lpss8250_board qrk_board = {
--
2.34.1
From: Leon Romanovsky <[email protected]>
[ Upstream commit 7922d3de4d270a9aedb71212fc0d5ae697ced516 ]
This reverts commit 7c4a539ec38f4ce400a0f3fcb5ff6c940fcd67bb. which causes
to the following error in mlx4.
Destroy of kernel CQ shouldn't fail
WARNING: CPU: 4 PID: 18064 at include/rdma/ib_verbs.h:3936 mlx4_ib_dealloc_xrcd+0x12e/0x1b0 [mlx4_ib]
Modules linked in: bonding ib_ipoib ip_gre ipip tunnel4 geneve rdma_ucm nf_tables ib_umad mlx4_en mlx4_ib ib_uverbs mlx4_core ip6_gre gre ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay fuse [last unloaded: mlx4_core]
CPU: 4 PID: 18064 Comm: ibv_xsrq_pingpo Not tainted 5.17.0-rc7_master_62c6ecb #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx4_ib_dealloc_xrcd+0x12e/0x1b0 [mlx4_ib]
Code: 1e 93 08 00 40 80 fd 01 0f 87 fa f1 04 00 83 e5 01 0f 85 2b ff ff ff 48 c7 c7 20 4f b6 a0 c6 05 fd 92 08 00 01 e8 47 c9 82 e2 <0f> 0b e9 11 ff ff ff 0f b6 2d eb 92 08 00 40 80 fd 01 0f 87 b1 f1
RSP: 0018:ffff8881a4957750 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8881ac4b6800 RCX: 0000000000000000
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed103492aedc
RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2e378eb
R10: ffffed109a5c6f1d R11: 0000000000000001 R12: ffff888132620000
R13: ffff8881a4957a90 R14: ffff8881aa2d4000 R15: ffff8881a4957ad0
FS: 00007f0401747740(0000) GS:ffff8884d2e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f8ae036118 CR3: 000000012fe94005 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ib_dealloc_xrcd_user+0xce/0x120 [ib_core]
ib_uverbs_dealloc_xrcd+0xad/0x210 [ib_uverbs]
uverbs_free_xrcd+0xe8/0x190 [ib_uverbs]
destroy_hw_idr_uobject+0x7a/0x130 [ib_uverbs]
uverbs_destroy_uobject+0x164/0x730 [ib_uverbs]
uobj_destroy+0x72/0xf0 [ib_uverbs]
ib_uverbs_cmd_verbs+0x19fb/0x3110 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x856/0x1550
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 7c4a539ec38f ("RDMA/core: Fix ib_qp_usecnt_dec() called when error")
Link: https://lore.kernel.org/r/74c11029adaf449b3b9228a77cc82f39e9e892c8.1646851220.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/uverbs_cmd.c | 1 +
drivers/infiniband/core/uverbs_std_types_qp.c | 1 +
drivers/infiniband/core/verbs.c | 3 ++-
3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index 5a99e31df5f5..d1345d76d9b1 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -1438,6 +1438,7 @@ static int create_qp(struct uverbs_attr_bundle *attrs,
ret = PTR_ERR(qp);
goto err_put;
}
+ ib_qp_usecnt_inc(qp);
obj->uevent.uobject.object = qp;
obj->uevent.event_file = READ_ONCE(attrs->ufile->default_async_file);
diff --git a/drivers/infiniband/core/uverbs_std_types_qp.c b/drivers/infiniband/core/uverbs_std_types_qp.c
index 75353e09c6fe..dd1075466f61 100644
--- a/drivers/infiniband/core/uverbs_std_types_qp.c
+++ b/drivers/infiniband/core/uverbs_std_types_qp.c
@@ -254,6 +254,7 @@ static int UVERBS_HANDLER(UVERBS_METHOD_QP_CREATE)(
ret = PTR_ERR(qp);
goto err_put;
}
+ ib_qp_usecnt_inc(qp);
if (attr.qp_type == IB_QPT_XRC_TGT) {
obj->uxrcd = container_of(xrcd_uobj, struct ib_uxrcd_object,
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index b78cd65d20a6..59e20936b800 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -1253,7 +1253,6 @@ static struct ib_qp *create_qp(struct ib_device *dev, struct ib_pd *pd,
if (ret)
goto err_security;
- ib_qp_usecnt_inc(qp);
rdma_restrack_add(&qp->res);
return qp;
@@ -1354,6 +1353,8 @@ struct ib_qp *ib_create_qp_kernel(struct ib_pd *pd,
if (IS_ERR(qp))
return qp;
+ ib_qp_usecnt_inc(qp);
+
if (qp_init_attr->cap.max_rdma_ctxs) {
ret = rdma_rw_init_mrs(qp, qp_init_attr);
if (ret)
--
2.34.1
From: Amit Kumar Mahapatra <[email protected]>
[ Upstream commit a1fe2ace2c39dcdc7c053705459a73b7598b1e4f ]
In devicetree the flash information is embedded within nand chip node,
so during nand chip initialization the nand chip node should be passed
to nand_set_flash_node() api, instead of nand controller node.
Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Amit Kumar Mahapatra <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/pl35x-nand-controller.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/pl35x-nand-controller.c b/drivers/mtd/nand/raw/pl35x-nand-controller.c
index 8a91e069ee2e..3c6f6aff649f 100644
--- a/drivers/mtd/nand/raw/pl35x-nand-controller.c
+++ b/drivers/mtd/nand/raw/pl35x-nand-controller.c
@@ -1062,7 +1062,7 @@ static int pl35x_nand_chip_init(struct pl35x_nandc *nfc,
chip->controller = &nfc->controller;
mtd = nand_to_mtd(chip);
mtd->dev.parent = nfc->dev;
- nand_set_flash_node(chip, nfc->dev->of_node);
+ nand_set_flash_node(chip, np);
if (!mtd->name) {
mtd->name = devm_kasprintf(nfc->dev, GFP_KERNEL,
"%s", PL35X_NANDC_DRIVER_NAME);
--
2.34.1
From: Valentin Schneider <[email protected]>
[ Upstream commit fa2c3254d7cfff5f7a916ab928a562d1165f17bb ]
As of commit
c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu")
the following sequence becomes possible:
p->__state = TASK_INTERRUPTIBLE;
__schedule()
deactivate_task(p);
ttwu()
READ !p->on_rq
p->__state=TASK_WAKING
trace_sched_switch()
__trace_sched_switch_state()
task_state_index()
return 0;
TASK_WAKING isn't in TASK_REPORT, so the task appears as TASK_RUNNING in
the trace event.
Prevent this by pushing the value read from __schedule() down the trace
event.
Reported-by: Abhijeet Dharmapurikar <[email protected]>
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sched.h | 11 ++++++++---
include/trace/events/sched.h | 11 +++++++----
kernel/sched/core.c | 4 ++--
kernel/trace/fgraph.c | 4 +++-
kernel/trace/ftrace.c | 4 +++-
kernel/trace/trace_events.c | 8 ++++++--
kernel/trace/trace_osnoise.c | 4 +++-
kernel/trace/trace_sched_switch.c | 1 +
kernel/trace/trace_sched_wakeup.c | 1 +
9 files changed, 34 insertions(+), 14 deletions(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 76e869550646..8fcf76fed984 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1616,10 +1616,10 @@ static inline pid_t task_pgrp_nr(struct task_struct *tsk)
#define TASK_REPORT_IDLE (TASK_REPORT + 1)
#define TASK_REPORT_MAX (TASK_REPORT_IDLE << 1)
-static inline unsigned int task_state_index(struct task_struct *tsk)
+static inline unsigned int __task_state_index(unsigned int tsk_state,
+ unsigned int tsk_exit_state)
{
- unsigned int tsk_state = READ_ONCE(tsk->__state);
- unsigned int state = (tsk_state | tsk->exit_state) & TASK_REPORT;
+ unsigned int state = (tsk_state | tsk_exit_state) & TASK_REPORT;
BUILD_BUG_ON_NOT_POWER_OF_2(TASK_REPORT_MAX);
@@ -1629,6 +1629,11 @@ static inline unsigned int task_state_index(struct task_struct *tsk)
return fls(state);
}
+static inline unsigned int task_state_index(struct task_struct *tsk)
+{
+ return __task_state_index(READ_ONCE(tsk->__state), tsk->exit_state);
+}
+
static inline char task_index_to_char(unsigned int state)
{
static const char state_char[] = "RSDTtXZPI";
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 94640482cfe7..65e786756321 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -187,7 +187,9 @@ DEFINE_EVENT(sched_wakeup_template, sched_wakeup_new,
TP_ARGS(p));
#ifdef CREATE_TRACE_POINTS
-static inline long __trace_sched_switch_state(bool preempt, struct task_struct *p)
+static inline long __trace_sched_switch_state(bool preempt,
+ unsigned int prev_state,
+ struct task_struct *p)
{
unsigned int state;
@@ -208,7 +210,7 @@ static inline long __trace_sched_switch_state(bool preempt, struct task_struct *
* it for left shift operation to get the correct task->state
* mapping.
*/
- state = task_state_index(p);
+ state = __task_state_index(prev_state, p->exit_state);
return state ? (1 << (state - 1)) : state;
}
@@ -220,10 +222,11 @@ static inline long __trace_sched_switch_state(bool preempt, struct task_struct *
TRACE_EVENT(sched_switch,
TP_PROTO(bool preempt,
+ unsigned int prev_state,
struct task_struct *prev,
struct task_struct *next),
- TP_ARGS(preempt, prev, next),
+ TP_ARGS(preempt, prev_state, prev, next),
TP_STRUCT__entry(
__array( char, prev_comm, TASK_COMM_LEN )
@@ -239,7 +242,7 @@ TRACE_EVENT(sched_switch,
memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
__entry->prev_pid = prev->pid;
__entry->prev_prio = prev->prio;
- __entry->prev_state = __trace_sched_switch_state(preempt, prev);
+ __entry->prev_state = __trace_sched_switch_state(preempt, prev_state, prev);
memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
__entry->next_pid = next->pid;
__entry->next_prio = next->prio;
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index c51bd3692316..2fd338bcbdcc 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4787,7 +4787,7 @@ static struct rq *finish_task_switch(struct task_struct *prev)
{
struct rq *rq = this_rq();
struct mm_struct *mm = rq->prev_mm;
- long prev_state;
+ unsigned int prev_state;
/*
* The previous task will have left us with a preempt_count of 2
@@ -6295,7 +6295,7 @@ static void __sched notrace __schedule(unsigned int sched_mode)
migrate_disable_switch(rq, prev);
psi_sched_switch(prev, next, !task_on_rq_queued(prev));
- trace_sched_switch(sched_mode & SM_MASK_PREEMPT, prev, next);
+ trace_sched_switch(sched_mode & SM_MASK_PREEMPT, prev_state, prev, next);
/* Also unlocks the rq: */
rq = context_switch(rq, prev, next, &rf);
diff --git a/kernel/trace/fgraph.c b/kernel/trace/fgraph.c
index b8a0d1d564fb..bb383ac91198 100644
--- a/kernel/trace/fgraph.c
+++ b/kernel/trace/fgraph.c
@@ -413,7 +413,9 @@ static int alloc_retstack_tasklist(struct ftrace_ret_stack **ret_stack_list)
static void
ftrace_graph_probe_sched_switch(void *ignore, bool preempt,
- struct task_struct *prev, struct task_struct *next)
+ unsigned int prev_state,
+ struct task_struct *prev,
+ struct task_struct *next)
{
unsigned long long timestamp;
int index;
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index c672040142e9..136520a5b7c0 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -7093,7 +7093,9 @@ ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops)
static void
ftrace_filter_pid_sched_switch_probe(void *data, bool preempt,
- struct task_struct *prev, struct task_struct *next)
+ unsigned int prev_state,
+ struct task_struct *prev,
+ struct task_struct *next)
{
struct trace_array *tr = data;
struct trace_pid_list *pid_list;
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 44d031ffe511..dd17171829d6 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -759,7 +759,9 @@ void trace_event_follow_fork(struct trace_array *tr, bool enable)
static void
event_filter_pid_sched_switch_probe_pre(void *data, bool preempt,
- struct task_struct *prev, struct task_struct *next)
+ unsigned int prev_state,
+ struct task_struct *prev,
+ struct task_struct *next)
{
struct trace_array *tr = data;
struct trace_pid_list *no_pid_list;
@@ -783,7 +785,9 @@ event_filter_pid_sched_switch_probe_pre(void *data, bool preempt,
static void
event_filter_pid_sched_switch_probe_post(void *data, bool preempt,
- struct task_struct *prev, struct task_struct *next)
+ unsigned int prev_state,
+ struct task_struct *prev,
+ struct task_struct *next)
{
struct trace_array *tr = data;
struct trace_pid_list *no_pid_list;
diff --git a/kernel/trace/trace_osnoise.c b/kernel/trace/trace_osnoise.c
index 93de784ee681..c3bd968e6147 100644
--- a/kernel/trace/trace_osnoise.c
+++ b/kernel/trace/trace_osnoise.c
@@ -1000,7 +1000,9 @@ thread_exit(struct osnoise_variables *osn_var, struct task_struct *t)
* used to record the beginning and to report the end of a thread noise window.
*/
static void
-trace_sched_switch_callback(void *data, bool preempt, struct task_struct *p,
+trace_sched_switch_callback(void *data, bool preempt,
+ unsigned int prev_state,
+ struct task_struct *p,
struct task_struct *n)
{
struct osnoise_variables *osn_var = this_cpu_osn_var();
diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c
index e304196d7c28..993b0ed10d8c 100644
--- a/kernel/trace/trace_sched_switch.c
+++ b/kernel/trace/trace_sched_switch.c
@@ -22,6 +22,7 @@ static DEFINE_MUTEX(sched_register_mutex);
static void
probe_sched_switch(void *ignore, bool preempt,
+ unsigned int prev_state,
struct task_struct *prev, struct task_struct *next)
{
int flags;
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 2402de520eca..46429f9a96fa 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -426,6 +426,7 @@ tracing_sched_wakeup_trace(struct trace_array *tr,
static void notrace
probe_wakeup_sched_switch(void *ignore, bool preempt,
+ unsigned int prev_state,
struct task_struct *prev, struct task_struct *next)
{
struct trace_array_cpu *data;
--
2.34.1
From: Christophe Leroy <[email protected]>
commit f222ab83df92acf72691a2021e1f0d99880dcdf1 upstream.
set_memory_attr() was implemented by commit 4d1755b6a762 ("powerpc/mm:
implement set_memory_attr()") because the set_memory_xx() couldn't
be used at that time to modify memory "on the fly" as explained it
the commit.
But set_memory_attr() uses set_pte_at() which leads to warnings when
CONFIG_DEBUG_VM is selected, because set_pte_at() is unexpected for
updating existing page table entries.
The check could be bypassed by using __set_pte_at() instead,
as it was the case before commit c988cfd38e48 ("powerpc/32:
use set_memory_attr()") but since commit 9f7853d7609d ("powerpc/mm:
Fix set_memory_*() against concurrent accesses") it is now possible
to use set_memory_xx() functions to update page table entries
"on the fly" because the update is now atomic.
For DEBUG_PAGEALLOC we need to clear and set back _PAGE_PRESENT.
Add set_memory_np() and set_memory_p() for that.
Replace all uses of set_memory_attr() by the relevant set_memory_xx()
and remove set_memory_attr().
Fixes: c988cfd38e48 ("powerpc/32: use set_memory_attr()")
Cc: [email protected]
Reported-by: Maxime Bizon <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Tested-by: Maxime Bizon <[email protected]>
Reviewed-by: Russell Currey <[email protected]>
Depends-on: 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/cda2b44b55c96f9ac69fa92e68c01084ec9495c5.1640344012.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/set_memory.h | 12 +++++++++-
arch/powerpc/mm/pageattr.c | 39 +++++-----------------------------
arch/powerpc/mm/pgtable_32.c | 24 +++++++++-----------
3 files changed, 28 insertions(+), 47 deletions(-)
--- a/arch/powerpc/include/asm/set_memory.h
+++ b/arch/powerpc/include/asm/set_memory.h
@@ -6,6 +6,8 @@
#define SET_MEMORY_RW 1
#define SET_MEMORY_NX 2
#define SET_MEMORY_X 3
+#define SET_MEMORY_NP 4 /* Set memory non present */
+#define SET_MEMORY_P 5 /* Set memory present */
int change_memory_attr(unsigned long addr, int numpages, long action);
@@ -29,6 +31,14 @@ static inline int set_memory_x(unsigned
return change_memory_attr(addr, numpages, SET_MEMORY_X);
}
-int set_memory_attr(unsigned long addr, int numpages, pgprot_t prot);
+static inline int set_memory_np(unsigned long addr, int numpages)
+{
+ return change_memory_attr(addr, numpages, SET_MEMORY_NP);
+}
+
+static inline int set_memory_p(unsigned long addr, int numpages)
+{
+ return change_memory_attr(addr, numpages, SET_MEMORY_P);
+}
#endif
--- a/arch/powerpc/mm/pageattr.c
+++ b/arch/powerpc/mm/pageattr.c
@@ -48,6 +48,12 @@ static int change_page_attr(pte_t *ptep,
case SET_MEMORY_X:
pte = pte_mkexec(pte);
break;
+ case SET_MEMORY_NP:
+ pte_update(&init_mm, addr, ptep, _PAGE_PRESENT, 0, 0);
+ break;
+ case SET_MEMORY_P:
+ pte_update(&init_mm, addr, ptep, 0, _PAGE_PRESENT, 0);
+ break;
default:
WARN_ON_ONCE(1);
break;
@@ -96,36 +102,3 @@ int change_memory_attr(unsigned long add
return apply_to_existing_page_range(&init_mm, start, size,
change_page_attr, (void *)action);
}
-
-/*
- * Set the attributes of a page:
- *
- * This function is used by PPC32 at the end of init to set final kernel memory
- * protection. It includes changing the maping of the page it is executing from
- * and data pages it is using.
- */
-static int set_page_attr(pte_t *ptep, unsigned long addr, void *data)
-{
- pgprot_t prot = __pgprot((unsigned long)data);
-
- spin_lock(&init_mm.page_table_lock);
-
- set_pte_at(&init_mm, addr, ptep, pte_modify(*ptep, prot));
- flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
-
- spin_unlock(&init_mm.page_table_lock);
-
- return 0;
-}
-
-int set_memory_attr(unsigned long addr, int numpages, pgprot_t prot)
-{
- unsigned long start = ALIGN_DOWN(addr, PAGE_SIZE);
- unsigned long sz = numpages * PAGE_SIZE;
-
- if (numpages <= 0)
- return 0;
-
- return apply_to_existing_page_range(&init_mm, start, sz, set_page_attr,
- (void *)pgprot_val(prot));
-}
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -138,10 +138,12 @@ void mark_initmem_nx(void)
unsigned long numpages = PFN_UP((unsigned long)_einittext) -
PFN_DOWN((unsigned long)_sinittext);
- if (v_block_mapped((unsigned long)_sinittext))
+ if (v_block_mapped((unsigned long)_sinittext)) {
mmu_mark_initmem_nx();
- else
- set_memory_attr((unsigned long)_sinittext, numpages, PAGE_KERNEL);
+ } else {
+ set_memory_nx((unsigned long)_sinittext, numpages);
+ set_memory_rw((unsigned long)_sinittext, numpages);
+ }
}
#ifdef CONFIG_STRICT_KERNEL_RWX
@@ -155,18 +157,14 @@ void mark_rodata_ro(void)
return;
}
- numpages = PFN_UP((unsigned long)_etext) -
- PFN_DOWN((unsigned long)_stext);
-
- set_memory_attr((unsigned long)_stext, numpages, PAGE_KERNEL_ROX);
/*
- * mark .rodata as read only. Use __init_begin rather than __end_rodata
- * to cover NOTES and EXCEPTION_TABLE.
+ * mark .text and .rodata as read only. Use __init_begin rather than
+ * __end_rodata to cover NOTES and EXCEPTION_TABLE.
*/
numpages = PFN_UP((unsigned long)__init_begin) -
- PFN_DOWN((unsigned long)__start_rodata);
+ PFN_DOWN((unsigned long)_stext);
- set_memory_attr((unsigned long)__start_rodata, numpages, PAGE_KERNEL_RO);
+ set_memory_ro((unsigned long)_stext, numpages);
// mark_initmem_nx() should have already run by now
ptdump_check_wx();
@@ -182,8 +180,8 @@ void __kernel_map_pages(struct page *pag
return;
if (enable)
- set_memory_attr(addr, numpages, PAGE_KERNEL);
+ set_memory_p(addr, numpages);
else
- set_memory_attr(addr, numpages, __pgprot(0));
+ set_memory_np(addr, numpages);
}
#endif /* CONFIG_DEBUG_PAGEALLOC */
From: Daniel Henrique Barboza <[email protected]>
[ Upstream commit 749ed4a20657bcea66a6e082ca3dc0d228cbec80 ]
Executing node_set_online() when nid = NUMA_NO_NODE results in an
undefined behavior. node_set_online() will call node_set_state(), into
__node_set(), into set_bit(), and since NUMA_NO_NODE is -1 we'll end up
doing a negative shift operation inside
arch/powerpc/include/asm/bitops.h. This potential UB was detected
running a kernel with CONFIG_UBSAN.
The behavior was introduced by commit 10f78fd0dabb ("powerpc/numa: Fix a
regression on memoryless node 0"), where the check for nid > 0 was
removed to fix a problem that was happening with nid = 0, but the result
is that now we're trying to online NUMA_NO_NODE nids as well.
Checking for nid >= 0 will allow node 0 to be onlined while avoiding
this UB with NUMA_NO_NODE.
Fixes: 10f78fd0dabb ("powerpc/numa: Fix a regression on memoryless node 0")
Reported-by: Ping Fang <[email protected]>
Signed-off-by: Daniel Henrique Barboza <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/numa.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 59d3cfcd7887..5fb829256b59 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -956,7 +956,9 @@ static int __init parse_numa_properties(void)
of_node_put(cpu);
}
- node_set_online(nid);
+ /* node_set_online() is an UB if 'nid' is negative */
+ if (likely(nid >= 0))
+ node_set_online(nid);
}
get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
--
2.34.1
From: Abhishek Sahu <[email protected]>
[ Upstream commit 26a17b12d7f3dd8a7aa45a290e5b46e9cc775ddf ]
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then the
current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition. For reset-related
functionalities, vfio driver uses PCI reset API's. These
API's internally change the PCI power state back to D0 first if
the device power state is non-D0. This state change to D0 will happen
without the involvement of vfio driver.
Let's consider the following example:
1. The device is in D3hot.
2. User invokes VFIO_DEVICE_RESET ioctl.
3. pci_try_reset_function() will be called which internally
invokes pci_dev_save_and_disable().
4. pci_set_power_state(dev, PCI_D0) will be called first.
5. pci_save_state() will happen then.
Now, for the devices which has NoSoftRst-, the pci_set_power_state()
can trigger soft reset and the original PCI config state will be lost
at step (4) and this state cannot be restored again. This original PCI
state can include any setting which is performed by SBIOS or host
linux kernel (for example LTR, ASPM L1 substates, etc.). When this
soft reset will be triggered, then all these settings will be reset,
and the device state saved at step (5) will also have this setting
cleared so it cannot be restored. Since the vfio driver only exposes
limited PCI capabilities to its user, so the vfio driver user also
won't have the option to save and restore these capabilities state
either and these original settings will be permanently lost.
For pci_reset_bus() also, we can have the above situation.
The other functions/devices can be in D3hot and the reset will change
the power state of all devices to D0 without the involvement of vfio
driver.
So, before calling any reset-related API's, we need to make sure that
the device state is D0. This is mainly to preserve the state around
soft reset.
For vfio_pci_core_disable(), we use __pci_reset_function_locked()
which internally can use pci_pm_reset() for the function reset.
pci_pm_reset() requires the device power state to be in D0, otherwise
it returns error.
This patch changes the device power state to D0 by invoking
vfio_pci_set_power_state() explicitly before calling any reset related
API's.
Fixes: 51ef3a004b1e ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/pci/vfio_pci_core.c | 48 ++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index 0c63091cc848..15d158bdcde0 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -335,6 +335,17 @@ void vfio_pci_core_disable(struct vfio_pci_core_device *vdev)
/* For needs_reset */
lockdep_assert_held(&vdev->vdev.dev_set->lock);
+ /*
+ * This function can be invoked while the power state is non-D0.
+ * This function calls __pci_reset_function_locked() which internally
+ * can use pci_pm_reset() for the function reset. pci_pm_reset() will
+ * fail if the power state is non-D0. Also, for the devices which
+ * have NoSoftRst-, the reset function can cause the PCI config space
+ * reset without restoring the original state (saved locally in
+ * 'vdev->pm_save').
+ */
+ vfio_pci_set_power_state(vdev, PCI_D0);
+
/* Stop the device from further DMA */
pci_clear_master(pdev);
@@ -934,6 +945,19 @@ long vfio_pci_core_ioctl(struct vfio_device *core_vdev, unsigned int cmd,
return -EINVAL;
vfio_pci_zap_and_down_write_memory_lock(vdev);
+
+ /*
+ * This function can be invoked while the power state is non-D0.
+ * If pci_try_reset_function() has been called while the power
+ * state is non-D0, then pci_try_reset_function() will
+ * internally set the power state to D0 without vfio driver
+ * involvement. For the devices which have NoSoftRst-, the
+ * reset function can cause the PCI config space reset without
+ * restoring the original state (saved locally in
+ * 'vdev->pm_save').
+ */
+ vfio_pci_set_power_state(vdev, PCI_D0);
+
ret = pci_try_reset_function(vdev->pdev);
up_write(&vdev->memory_lock);
@@ -2077,6 +2101,18 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,
}
cur_mem = NULL;
+ /*
+ * The pci_reset_bus() will reset all the devices in the bus.
+ * The power state can be non-D0 for some of the devices in the bus.
+ * For these devices, the pci_reset_bus() will internally set
+ * the power state to D0 without vfio driver involvement.
+ * For the devices which have NoSoftRst-, the reset function can
+ * cause the PCI config space reset without restoring the original
+ * state (saved locally in 'vdev->pm_save').
+ */
+ list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list)
+ vfio_pci_set_power_state(cur, PCI_D0);
+
ret = pci_reset_bus(pdev);
err_undo:
@@ -2130,6 +2166,18 @@ static bool vfio_pci_dev_set_try_reset(struct vfio_device_set *dev_set)
if (!pdev)
return false;
+ /*
+ * The pci_reset_bus() will reset all the devices in the bus.
+ * The power state can be non-D0 for some of the devices in the bus.
+ * For these devices, the pci_reset_bus() will internally set
+ * the power state to D0 without vfio driver involvement.
+ * For the devices which have NoSoftRst-, the reset function can
+ * cause the PCI config space reset without restoring the original
+ * state (saved locally in 'vdev->pm_save').
+ */
+ list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list)
+ vfio_pci_set_power_state(cur, PCI_D0);
+
ret = pci_reset_bus(pdev);
if (ret)
return false;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 221e3638feb8bc42143833c9a704fa89b6c366bb ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore. Add put_device() call to fix this.
Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/tegra/dsi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index f46d377f0c30..de1333dc0d86 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1538,8 +1538,10 @@ static int tegra_dsi_ganged_probe(struct tegra_dsi *dsi)
dsi->slave = platform_get_drvdata(gangster);
of_node_put(np);
- if (!dsi->slave)
+ if (!dsi->slave) {
+ put_device(&gangster->dev);
return -EPROBE_DEFER;
+ }
dsi->slave->master = dsi;
}
--
2.34.1
From: Zheng Yongjun <[email protected]>
[ Upstream commit 0906f3a3df07835e37077d8971aac65347f2ed57 ]
As the possible failure of the allocation, devm_kzalloc() may return NULL
pointer.
Therefore, it should be better to check the 'db' in order to prevent
the dereference of NULL pointer.
Fixes: 10615907e9b51 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Zheng Yongjun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c b/drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c
index 7436f62fa152..174ad95e746a 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_fdma.c
@@ -420,6 +420,8 @@ static int sparx5_fdma_tx_alloc(struct sparx5 *sparx5)
db_hw->dataptr = phys;
db_hw->status = 0;
db = devm_kzalloc(sparx5->dev, sizeof(*db), GFP_KERNEL);
+ if (!db)
+ return -ENOMEM;
db->cpu_addr = cpu_addr;
list_add_tail(&db->list, &tx->db_list);
}
--
2.34.1
From: Corinna Vinschen <[email protected]>
[ Upstream commit 453307b569a0d41bddd07f26bf41b784cd82a4c9 ]
Calling ethtool changing the RX ring parameters like this:
$ ethtool -G eth0 rx 1024
on igc triggers kernel warnings like this:
[ 225.198467] ------------[ cut here ]------------
[ 225.198473] Missing unregister, handled but fix driver
[ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168
xdp_rxq_info_reg+0x79/0xd0
[...]
[ 225.198601] Call Trace:
[ 225.198604] <TASK>
[ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc]
[ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc]
[ 225.198626] ethnl_set_rings+0x18a/0x250
[ 225.198631] genl_family_rcv_msg_doit+0xca/0x110
[ 225.198637] genl_rcv_msg+0xce/0x1c0
[ 225.198640] ? rings_prepare_data+0x60/0x60
[ 225.198644] ? genl_get_cmd+0xd0/0xd0
[ 225.198647] netlink_rcv_skb+0x4e/0xf0
[ 225.198652] genl_rcv+0x24/0x40
[ 225.198655] netlink_unicast+0x20e/0x330
[ 225.198659] netlink_sendmsg+0x23f/0x480
[ 225.198663] sock_sendmsg+0x5b/0x60
[ 225.198667] __sys_sendto+0xf0/0x160
[ 225.198671] ? handle_mm_fault+0xb2/0x280
[ 225.198676] ? do_user_addr_fault+0x1eb/0x690
[ 225.198680] __x64_sys_sendto+0x20/0x30
[ 225.198683] do_syscall_64+0x38/0x90
[ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 225.198693] RIP: 0033:0x7f7ae38ac3aa
igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to
reset the xdp_rxq_info member before calling igc_setup_rx_resources().
This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info.
Make sure to unregister the xdp_rxq_info structure first in
igc_setup_rx_resources.
Fixes: 73f1071c1d29 ("igc: Add support for XDP_TX action")
Reported-by: Lennert Buytenhek <[email protected]>
Signed-off-by: Corinna Vinschen <[email protected]>
Acked-by: Vinicius Costa Gomes <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igc/igc_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index a514cfc6c8a0..f99819fc559d 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -504,6 +504,9 @@ int igc_setup_rx_resources(struct igc_ring *rx_ring)
u8 index = rx_ring->queue_index;
int size, desc_len, res;
+ /* XDP RX-queue info */
+ if (xdp_rxq_info_is_reg(&rx_ring->xdp_rxq))
+ xdp_rxq_info_unreg(&rx_ring->xdp_rxq);
res = xdp_rxq_info_reg(&rx_ring->xdp_rxq, ndev, index,
rx_ring->q_vector->napi.napi_id);
if (res < 0) {
--
2.34.1
From: Daniel Thompson <[email protected]>
[ Upstream commit c1cb81429df462eca1b6ba615cddd21dd3103c46 ]
Currently kdb_putarea_size() uses copy_from_kernel_nofault() to write *to*
arbitrary kernel memory. This is obviously wrong and means the memory
modify ('mm') command is a serious risk to debugger stability: if we poke
to a bad address we'll double-fault and lose our debug session.
Fix this the (very) obvious way.
Note that there are two Fixes: tags because the API was renamed and this
patch will only trivially backport as far as the rename (and this is
probably enough). Nevertheless Christoph's rename did not introduce this
problem so I wanted to record that!
Fixes: fe557319aa06 ("maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault")
Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
Signed-off-by: Daniel Thompson <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/debug/kdb/kdb_support.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index df2bface866e..85cb51c4a17e 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -291,7 +291,7 @@ int kdb_getarea_size(void *res, unsigned long addr, size_t size)
*/
int kdb_putarea_size(unsigned long addr, void *res, size_t size)
{
- int ret = copy_from_kernel_nofault((char *)addr, (char *)res, size);
+ int ret = copy_to_kernel_nofault((char *)addr, (char *)res, size);
if (ret) {
if (!KDB_STATE(SUPPRESS)) {
kdb_func_printf("Bad address 0x%lx\n", addr);
--
2.34.1
From: Martin Blumenstingl <[email protected]>
[ Upstream commit 04b8a5d9cfd171f65df75f444b5617a372649edd ]
Use this to simplify the driver shutdown. It will also come handy when
fixing the error handling in meson_drv_bind_master().
Signed-off-by: Martin Blumenstingl <[email protected]>
Fixes: d1b5e41e13a7e9 ("drm/meson: Add AFBCD module driver")
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 6 ++--
drivers/gpu/drm/meson/meson_osd_afbcd.c | 41 ++++++++++++++++---------
drivers/gpu/drm/meson/meson_osd_afbcd.h | 1 +
3 files changed, 30 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index bc0d60df04ae..62846af2f5e5 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -381,10 +381,8 @@ static void meson_drv_unbind(struct device *dev)
free_irq(priv->vsync_irq, drm);
drm_dev_put(drm);
- if (priv->afbcd.ops) {
- priv->afbcd.ops->reset(priv);
- meson_rdma_free(priv);
- }
+ if (priv->afbcd.ops)
+ priv->afbcd.ops->exit(priv);
}
static const struct component_master_ops meson_drv_master_ops = {
diff --git a/drivers/gpu/drm/meson/meson_osd_afbcd.c b/drivers/gpu/drm/meson/meson_osd_afbcd.c
index ffc6b584dbf8..0cdbe899402f 100644
--- a/drivers/gpu/drm/meson/meson_osd_afbcd.c
+++ b/drivers/gpu/drm/meson/meson_osd_afbcd.c
@@ -79,11 +79,6 @@ static bool meson_gxm_afbcd_supported_fmt(u64 modifier, uint32_t format)
return meson_gxm_afbcd_pixel_fmt(modifier, format) >= 0;
}
-static int meson_gxm_afbcd_init(struct meson_drm *priv)
-{
- return 0;
-}
-
static int meson_gxm_afbcd_reset(struct meson_drm *priv)
{
writel_relaxed(VIU_SW_RESET_OSD1_AFBCD,
@@ -93,6 +88,16 @@ static int meson_gxm_afbcd_reset(struct meson_drm *priv)
return 0;
}
+static int meson_gxm_afbcd_init(struct meson_drm *priv)
+{
+ return 0;
+}
+
+static void meson_gxm_afbcd_exit(struct meson_drm *priv)
+{
+ meson_gxm_afbcd_reset(priv);
+}
+
static int meson_gxm_afbcd_enable(struct meson_drm *priv)
{
writel_relaxed(FIELD_PREP(OSD1_AFBCD_ID_FIFO_THRD, 0x40) |
@@ -172,6 +177,7 @@ static int meson_gxm_afbcd_setup(struct meson_drm *priv)
struct meson_afbcd_ops meson_afbcd_gxm_ops = {
.init = meson_gxm_afbcd_init,
+ .exit = meson_gxm_afbcd_exit,
.reset = meson_gxm_afbcd_reset,
.enable = meson_gxm_afbcd_enable,
.disable = meson_gxm_afbcd_disable,
@@ -269,6 +275,18 @@ static bool meson_g12a_afbcd_supported_fmt(u64 modifier, uint32_t format)
return meson_g12a_afbcd_pixel_fmt(modifier, format) >= 0;
}
+static int meson_g12a_afbcd_reset(struct meson_drm *priv)
+{
+ meson_rdma_reset(priv);
+
+ meson_rdma_writel_sync(priv, VIU_SW_RESET_G12A_AFBC_ARB |
+ VIU_SW_RESET_G12A_OSD1_AFBCD,
+ VIU_SW_RESET);
+ meson_rdma_writel_sync(priv, 0, VIU_SW_RESET);
+
+ return 0;
+}
+
static int meson_g12a_afbcd_init(struct meson_drm *priv)
{
int ret;
@@ -286,16 +304,10 @@ static int meson_g12a_afbcd_init(struct meson_drm *priv)
return 0;
}
-static int meson_g12a_afbcd_reset(struct meson_drm *priv)
+static void meson_g12a_afbcd_exit(struct meson_drm *priv)
{
- meson_rdma_reset(priv);
-
- meson_rdma_writel_sync(priv, VIU_SW_RESET_G12A_AFBC_ARB |
- VIU_SW_RESET_G12A_OSD1_AFBCD,
- VIU_SW_RESET);
- meson_rdma_writel_sync(priv, 0, VIU_SW_RESET);
-
- return 0;
+ meson_g12a_afbcd_reset(priv);
+ meson_rdma_free(priv);
}
static int meson_g12a_afbcd_enable(struct meson_drm *priv)
@@ -380,6 +392,7 @@ static int meson_g12a_afbcd_setup(struct meson_drm *priv)
struct meson_afbcd_ops meson_afbcd_g12a_ops = {
.init = meson_g12a_afbcd_init,
+ .exit = meson_g12a_afbcd_exit,
.reset = meson_g12a_afbcd_reset,
.enable = meson_g12a_afbcd_enable,
.disable = meson_g12a_afbcd_disable,
diff --git a/drivers/gpu/drm/meson/meson_osd_afbcd.h b/drivers/gpu/drm/meson/meson_osd_afbcd.h
index 5e5523304f42..e77ddeb6416f 100644
--- a/drivers/gpu/drm/meson/meson_osd_afbcd.h
+++ b/drivers/gpu/drm/meson/meson_osd_afbcd.h
@@ -14,6 +14,7 @@
struct meson_afbcd_ops {
int (*init)(struct meson_drm *priv);
+ void (*exit)(struct meson_drm *priv);
int (*reset)(struct meson_drm *priv);
int (*enable)(struct meson_drm *priv);
int (*disable)(struct meson_drm *priv);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit b0bfaf0544d08d093d6211d7ef8816fb0b5b6c75 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.
Fixes: a45f8853a5f9 ("ASoC: Add driver for PROTO Audio CODEC (with a WM8731)")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Codrin Ciubotariu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/atmel/mikroe-proto.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/sound/soc/atmel/mikroe-proto.c b/sound/soc/atmel/mikroe-proto.c
index 0be7b4221c14..93d114f5b9e6 100644
--- a/sound/soc/atmel/mikroe-proto.c
+++ b/sound/soc/atmel/mikroe-proto.c
@@ -115,7 +115,8 @@ static int snd_proto_probe(struct platform_device *pdev)
cpu_np = of_parse_phandle(np, "i2s-controller", 0);
if (!cpu_np) {
dev_err(&pdev->dev, "i2s-controller missing\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto put_codec_node;
}
dai->cpus->of_node = cpu_np;
dai->platforms->of_node = cpu_np;
@@ -125,7 +126,8 @@ static int snd_proto_probe(struct platform_device *pdev)
&bitclkmaster, &framemaster);
if (bitclkmaster != framemaster) {
dev_err(&pdev->dev, "Must be the same bitclock and frame master\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto put_cpu_node;
}
if (bitclkmaster) {
if (codec_np == bitclkmaster)
@@ -136,18 +138,20 @@ static int snd_proto_probe(struct platform_device *pdev)
dai_fmt |= snd_soc_daifmt_parse_clock_provider_as_flag(np, NULL);
}
- of_node_put(bitclkmaster);
- of_node_put(framemaster);
- dai->dai_fmt = dai_fmt;
-
- of_node_put(codec_np);
- of_node_put(cpu_np);
+ dai->dai_fmt = dai_fmt;
ret = snd_soc_register_card(&snd_proto);
if (ret && ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"snd_soc_register_card() failed: %d\n", ret);
+
+put_cpu_node:
+ of_node_put(bitclkmaster);
+ of_node_put(framemaster);
+ of_node_put(cpu_np);
+put_codec_node:
+ of_node_put(codec_np);
return ret;
}
--
2.34.1
From: Bikash Hazarika <[email protected]>
commit 1cfbbacbee2d6ea3816386a483e3c7a96e5bd657 upstream.
Corrected transmission speed mask values for FC.
Supported Speed: 16 32 20 Gb/s ===> Should be 64 instead of 20
Supported Speed: 16G 32G 48G ===> Should be 64G instead of 48G
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Bikash Hazarika <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_def.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2891,7 +2891,11 @@ struct ct_fdmi2_hba_attributes {
#define FDMI_PORT_SPEED_8GB 0x10
#define FDMI_PORT_SPEED_16GB 0x20
#define FDMI_PORT_SPEED_32GB 0x40
-#define FDMI_PORT_SPEED_64GB 0x80
+#define FDMI_PORT_SPEED_20GB 0x80
+#define FDMI_PORT_SPEED_40GB 0x100
+#define FDMI_PORT_SPEED_128GB 0x200
+#define FDMI_PORT_SPEED_64GB 0x400
+#define FDMI_PORT_SPEED_256GB 0x800
#define FDMI_PORT_SPEED_UNKNOWN 0x8000
#define FC_CLASS_2 0x04
From: Zhihao Cheng <[email protected]>
commit 278d9a243635f26c05ad95dcf9c5a593b9e04dc6 upstream.
Currently, rename whiteout has 3 steps:
1. create tmpfile(which associates old dentry to tmpfile inode) for
whiteout, and store tmpfile to disk
2. link whiteout, associate whiteout inode to old dentry agagin and
store old dentry, old inode, new dentry on disk
3. writeback dirty whiteout inode to disk
Suddenly power-cut or error occurring(eg. ENOSPC returned by budget,
memory allocation failure) during above steps may cause kinds of problems:
Problem 1: ENOSPC returned by whiteout space budget (before step 2),
old dentry will disappear after rename syscall, whiteout file
cannot be found either.
ls dir // we get file, whiteout
rename(dir/file, dir/whiteout, REANME_WHITEOUT)
ENOSPC = ubifs_budget_space(&wht_req) // return
ls dir // empty (no file, no whiteout)
Problem 2: Power-cut happens before step 3, whiteout inode with 'nlink=1'
is not stored on disk, whiteout dentry(old dentry) is written
on disk, whiteout file is lost on next mount (We get "dead
directory entry" after executing 'ls -l' on whiteout file).
Now, we use following 3 steps to finish rename whiteout:
1. create an in-mem inode with 'nlink = 1' as whiteout
2. ubifs_jnl_rename (Write on disk to finish associating old dentry to
whiteout inode, associating new dentry with old inode)
3. iput(whiteout)
Rely writing in-mem inode on disk by ubifs_jnl_rename() to finish rename
whiteout, which avoids middle disk state caused by suddenly power-cut
and error occurring.
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 144 +++++++++++++++++++++++++++++++++--------------------
fs/ubifs/journal.c | 52 ++++++++++++++++---
2 files changed, 136 insertions(+), 60 deletions(-)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -349,8 +349,56 @@ out_budg:
return err;
}
-static int do_tmpfile(struct inode *dir, struct dentry *dentry,
- umode_t mode, struct inode **whiteout)
+static struct inode *create_whiteout(struct inode *dir, struct dentry *dentry)
+{
+ int err;
+ umode_t mode = S_IFCHR | WHITEOUT_MODE;
+ struct inode *inode;
+ struct ubifs_info *c = dir->i_sb->s_fs_info;
+ struct fscrypt_name nm;
+
+ /*
+ * Create an inode('nlink = 1') for whiteout without updating journal,
+ * let ubifs_jnl_rename() store it on flash to complete rename whiteout
+ * atomically.
+ */
+
+ dbg_gen("dent '%pd', mode %#hx in dir ino %lu",
+ dentry, mode, dir->i_ino);
+
+ err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm);
+ if (err)
+ return ERR_PTR(err);
+
+ inode = ubifs_new_inode(c, dir, mode);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ goto out_free;
+ }
+
+ init_special_inode(inode, inode->i_mode, WHITEOUT_DEV);
+ ubifs_assert(c, inode->i_op == &ubifs_file_inode_operations);
+
+ err = ubifs_init_security(dir, inode, &dentry->d_name);
+ if (err)
+ goto out_inode;
+
+ /* The dir size is updated by do_rename. */
+ insert_inode_hash(inode);
+
+ return inode;
+
+out_inode:
+ make_bad_inode(inode);
+ iput(inode);
+out_free:
+ fscrypt_free_filename(&nm);
+ ubifs_err(c, "cannot create whiteout file, error %d", err);
+ return ERR_PTR(err);
+}
+
+static int ubifs_tmpfile(struct user_namespace *mnt_userns, struct inode *dir,
+ struct dentry *dentry, umode_t mode)
{
struct inode *inode;
struct ubifs_info *c = dir->i_sb->s_fs_info;
@@ -392,25 +440,13 @@ static int do_tmpfile(struct inode *dir,
}
ui = ubifs_inode(inode);
- if (whiteout) {
- init_special_inode(inode, inode->i_mode, WHITEOUT_DEV);
- ubifs_assert(c, inode->i_op == &ubifs_file_inode_operations);
- }
-
err = ubifs_init_security(dir, inode, &dentry->d_name);
if (err)
goto out_inode;
mutex_lock(&ui->ui_mutex);
insert_inode_hash(inode);
-
- if (whiteout) {
- mark_inode_dirty(inode);
- drop_nlink(inode);
- *whiteout = inode;
- } else {
- d_tmpfile(dentry, inode);
- }
+ d_tmpfile(dentry, inode);
ubifs_assert(c, ui->dirty);
instantiated = 1;
@@ -432,8 +468,6 @@ out_inode:
make_bad_inode(inode);
if (!instantiated)
iput(inode);
- else if (whiteout)
- iput(*whiteout);
out_budg:
ubifs_release_budget(c, &req);
if (!instantiated)
@@ -443,12 +477,6 @@ out_budg:
return err;
}
-static int ubifs_tmpfile(struct user_namespace *mnt_userns, struct inode *dir,
- struct dentry *dentry, umode_t mode)
-{
- return do_tmpfile(dir, dentry, mode, NULL);
-}
-
/**
* vfs_dent_type - get VFS directory entry type.
* @type: UBIFS directory entry type
@@ -1266,17 +1294,19 @@ static int do_rename(struct inode *old_d
.dirtied_ino = 3 };
struct ubifs_budget_req ino_req = { .dirtied_ino = 1,
.dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) };
+ struct ubifs_budget_req wht_req;
struct timespec64 time;
unsigned int saved_nlink;
struct fscrypt_name old_nm, new_nm;
/*
- * Budget request settings: deletion direntry, new direntry, removing
- * the old inode, and changing old and new parent directory inodes.
+ * Budget request settings:
+ * req: deletion direntry, new direntry, removing the old inode,
+ * and changing old and new parent directory inodes.
+ *
+ * wht_req: new whiteout inode for RENAME_WHITEOUT.
*
- * However, this operation also marks the target inode as dirty and
- * does not write it, so we allocate budget for the target inode
- * separately.
+ * ino_req: marks the target inode as dirty and does not write it.
*/
dbg_gen("dent '%pd' ino %lu in dir ino %lu to dent '%pd' in dir ino %lu flags 0x%x",
@@ -1326,7 +1356,6 @@ static int do_rename(struct inode *old_d
if (flags & RENAME_WHITEOUT) {
union ubifs_dev_desc *dev = NULL;
- struct ubifs_budget_req wht_req;
dev = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS);
if (!dev) {
@@ -1334,24 +1363,26 @@ static int do_rename(struct inode *old_d
goto out_release;
}
- err = do_tmpfile(old_dir, old_dentry, S_IFCHR | WHITEOUT_MODE, &whiteout);
- if (err) {
+ /*
+ * The whiteout inode without dentry is pinned in memory,
+ * umount won't happen during rename process because we
+ * got parent dentry.
+ */
+ whiteout = create_whiteout(old_dir, old_dentry);
+ if (IS_ERR(whiteout)) {
+ err = PTR_ERR(whiteout);
kfree(dev);
goto out_release;
}
- spin_lock(&whiteout->i_lock);
- whiteout->i_state |= I_LINKABLE;
- spin_unlock(&whiteout->i_lock);
-
whiteout_ui = ubifs_inode(whiteout);
whiteout_ui->data = dev;
whiteout_ui->data_len = ubifs_encode_dev(dev, MKDEV(0, 0));
ubifs_assert(c, !whiteout_ui->dirty);
memset(&wht_req, 0, sizeof(struct ubifs_budget_req));
- wht_req.dirtied_ino = 1;
- wht_req.dirtied_ino_d = ALIGN(whiteout_ui->data_len, 8);
+ wht_req.new_ino = 1;
+ wht_req.new_ino_d = ALIGN(whiteout_ui->data_len, 8);
/*
* To avoid deadlock between space budget (holds ui_mutex and
* waits wb work) and writeback work(waits ui_mutex), do space
@@ -1359,6 +1390,11 @@ static int do_rename(struct inode *old_d
*/
err = ubifs_budget_space(c, &wht_req);
if (err) {
+ /*
+ * Whiteout inode can not be written on flash by
+ * ubifs_jnl_write_inode(), because it's neither
+ * dirty nor zero-nlink.
+ */
iput(whiteout);
goto out_release;
}
@@ -1433,17 +1469,11 @@ static int do_rename(struct inode *old_d
sync = IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir);
if (unlink && IS_SYNC(new_inode))
sync = 1;
- }
-
- if (whiteout) {
- inc_nlink(whiteout);
- mark_inode_dirty(whiteout);
-
- spin_lock(&whiteout->i_lock);
- whiteout->i_state &= ~I_LINKABLE;
- spin_unlock(&whiteout->i_lock);
-
- iput(whiteout);
+ /*
+ * S_SYNC flag of whiteout inherits from the old_dir, and we
+ * have already checked the old dir inode. So there is no need
+ * to check whiteout.
+ */
}
err = ubifs_jnl_rename(c, old_dir, old_inode, &old_nm, new_dir,
@@ -1454,6 +1484,11 @@ static int do_rename(struct inode *old_d
unlock_4_inodes(old_dir, new_dir, new_inode, whiteout);
ubifs_release_budget(c, &req);
+ if (whiteout) {
+ ubifs_release_budget(c, &wht_req);
+ iput(whiteout);
+ }
+
mutex_lock(&old_inode_ui->ui_mutex);
release = old_inode_ui->dirty;
mark_inode_dirty_sync(old_inode);
@@ -1462,11 +1497,16 @@ static int do_rename(struct inode *old_d
if (release)
ubifs_release_budget(c, &ino_req);
if (IS_SYNC(old_inode))
- err = old_inode->i_sb->s_op->write_inode(old_inode, NULL);
+ /*
+ * Rename finished here. Although old inode cannot be updated
+ * on flash, old ctime is not a big problem, don't return err
+ * code to userspace.
+ */
+ old_inode->i_sb->s_op->write_inode(old_inode, NULL);
fscrypt_free_filename(&old_nm);
fscrypt_free_filename(&new_nm);
- return err;
+ return 0;
out_cancel:
if (unlink) {
@@ -1487,11 +1527,11 @@ out_cancel:
inc_nlink(old_dir);
}
}
+ unlock_4_inodes(old_dir, new_dir, new_inode, whiteout);
if (whiteout) {
- drop_nlink(whiteout);
+ ubifs_release_budget(c, &wht_req);
iput(whiteout);
}
- unlock_4_inodes(old_dir, new_dir, new_inode, whiteout);
out_release:
ubifs_release_budget(c, &ino_req);
ubifs_release_budget(c, &req);
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -1207,9 +1207,9 @@ out_free:
* @sync: non-zero if the write-buffer has to be synchronized
*
* This function implements the re-name operation which may involve writing up
- * to 4 inodes and 2 directory entries. It marks the written inodes as clean
- * and returns zero on success. In case of failure, a negative error code is
- * returned.
+ * to 4 inodes(new inode, whiteout inode, old and new parent directory inodes)
+ * and 2 directory entries. It marks the written inodes as clean and returns
+ * zero on success. In case of failure, a negative error code is returned.
*/
int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
const struct inode *old_inode,
@@ -1222,14 +1222,15 @@ int ubifs_jnl_rename(struct ubifs_info *
void *p;
union ubifs_key key;
struct ubifs_dent_node *dent, *dent2;
- int err, dlen1, dlen2, ilen, lnum, offs, len, orphan_added = 0;
+ int err, dlen1, dlen2, ilen, wlen, lnum, offs, len, orphan_added = 0;
int aligned_dlen1, aligned_dlen2, plen = UBIFS_INO_NODE_SZ;
int last_reference = !!(new_inode && new_inode->i_nlink == 0);
int move = (old_dir != new_dir);
- struct ubifs_inode *new_ui;
+ struct ubifs_inode *new_ui, *whiteout_ui;
u8 hash_old_dir[UBIFS_HASH_ARR_SZ];
u8 hash_new_dir[UBIFS_HASH_ARR_SZ];
u8 hash_new_inode[UBIFS_HASH_ARR_SZ];
+ u8 hash_whiteout_inode[UBIFS_HASH_ARR_SZ];
u8 hash_dent1[UBIFS_HASH_ARR_SZ];
u8 hash_dent2[UBIFS_HASH_ARR_SZ];
@@ -1249,9 +1250,20 @@ int ubifs_jnl_rename(struct ubifs_info *
} else
ilen = 0;
+ if (whiteout) {
+ whiteout_ui = ubifs_inode(whiteout);
+ ubifs_assert(c, mutex_is_locked(&whiteout_ui->ui_mutex));
+ ubifs_assert(c, whiteout->i_nlink == 1);
+ ubifs_assert(c, !whiteout_ui->dirty);
+ wlen = UBIFS_INO_NODE_SZ;
+ wlen += whiteout_ui->data_len;
+ } else
+ wlen = 0;
+
aligned_dlen1 = ALIGN(dlen1, 8);
aligned_dlen2 = ALIGN(dlen2, 8);
- len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8);
+ len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) +
+ ALIGN(wlen, 8) + ALIGN(plen, 8);
if (move)
len += plen;
@@ -1313,6 +1325,15 @@ int ubifs_jnl_rename(struct ubifs_info *
p += ALIGN(ilen, 8);
}
+ if (whiteout) {
+ pack_inode(c, p, whiteout, 0);
+ err = ubifs_node_calc_hash(c, p, hash_whiteout_inode);
+ if (err)
+ goto out_release;
+
+ p += ALIGN(wlen, 8);
+ }
+
if (!move) {
pack_inode(c, p, old_dir, 1);
err = ubifs_node_calc_hash(c, p, hash_old_dir);
@@ -1352,6 +1373,9 @@ int ubifs_jnl_rename(struct ubifs_info *
if (new_inode)
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf,
new_inode->i_ino);
+ if (whiteout)
+ ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf,
+ whiteout->i_ino);
}
release_head(c, BASEHD);
@@ -1368,8 +1392,6 @@ int ubifs_jnl_rename(struct ubifs_info *
err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen2, hash_dent2, old_nm);
if (err)
goto out_ro;
-
- ubifs_delete_orphan(c, whiteout->i_ino);
} else {
err = ubifs_add_dirt(c, lnum, dlen2);
if (err)
@@ -1390,6 +1412,15 @@ int ubifs_jnl_rename(struct ubifs_info *
offs += ALIGN(ilen, 8);
}
+ if (whiteout) {
+ ino_key_init(c, &key, whiteout->i_ino);
+ err = ubifs_tnc_add(c, &key, lnum, offs, wlen,
+ hash_whiteout_inode);
+ if (err)
+ goto out_ro;
+ offs += ALIGN(wlen, 8);
+ }
+
ino_key_init(c, &key, old_dir->i_ino);
err = ubifs_tnc_add(c, &key, lnum, offs, plen, hash_old_dir);
if (err)
@@ -1410,6 +1441,11 @@ int ubifs_jnl_rename(struct ubifs_info *
new_ui->synced_i_size = new_ui->ui_size;
spin_unlock(&new_ui->ui_lock);
}
+ /*
+ * No need to mark whiteout inode clean.
+ * Whiteout doesn't have non-zero size, no need to update
+ * synced_i_size for whiteout_ui.
+ */
mark_inode_clean(c, ubifs_inode(old_dir));
if (move)
mark_inode_clean(c, ubifs_inode(new_dir));
From: Fangrui Song <[email protected]>
[ Upstream commit 4013e26670c590944abdab56c4fa797527b74325 ]
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt and .text.* sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error. Just remove (NOLOAD) to fix the error.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Tested-by: Nathan Chancellor <[email protected]>
Reported-by: Nathan Chancellor <[email protected]>
Signed-off-by: Fangrui Song <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/module.lds.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/include/asm/module.lds.h b/arch/arm64/include/asm/module.lds.h
index a11ccadd47d2..094701ec5500 100644
--- a/arch/arm64/include/asm/module.lds.h
+++ b/arch/arm64/include/asm/module.lds.h
@@ -1,8 +1,8 @@
SECTIONS {
#ifdef CONFIG_ARM64_MODULE_PLTS
- .plt 0 (NOLOAD) : { BYTE(0) }
- .init.plt 0 (NOLOAD) : { BYTE(0) }
- .text.ftrace_trampoline 0 (NOLOAD) : { BYTE(0) }
+ .plt 0 : { BYTE(0) }
+ .init.plt 0 : { BYTE(0) }
+ .text.ftrace_trampoline 0 : { BYTE(0) }
#endif
#ifdef CONFIG_KASAN_SW_TAGS
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 6ae0a4d8fec551ec581d620f0eb1fe31f755551c ]
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
For example, when codec_np is NULL, saif_np[0] and saif_np[1]
are not NULL, it will cause leaks.
of_node_put() will check if the node pointer is NULL, so we can
call it directly to release the refcount of regular pointers.
Fixes: e968194b45c4 ("ASoC: mxs: add device tree support for mxs-sgtl5000")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mxs/mxs-sgtl5000.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c
index a6407f4388de..fb721bc49949 100644
--- a/sound/soc/mxs/mxs-sgtl5000.c
+++ b/sound/soc/mxs/mxs-sgtl5000.c
@@ -118,6 +118,9 @@ static int mxs_sgtl5000_probe(struct platform_device *pdev)
codec_np = of_parse_phandle(np, "audio-codec", 0);
if (!saif_np[0] || !saif_np[1] || !codec_np) {
dev_err(&pdev->dev, "phandle missing or invalid\n");
+ of_node_put(codec_np);
+ of_node_put(saif_np[0]);
+ of_node_put(saif_np[1]);
return -EINVAL;
}
--
2.34.1
From: Will Deacon <[email protected]>
commit 770093459b9b333380aa71f2c31c60b14895c1df upstream.
Commit 031495635b46 ("arm64: Do not defer reserve_crashkernel() for
platforms with no DMA memory zones") introduced different definitions
for 'arm64_dma_phys_limit' depending on CONFIG_ZONE_DMA{,32} based on
a late suggestion from Pasha. Sadly, this results in a build error when
passing W=1:
| arch/arm64/mm/init.c:90:19: error: conflicting type qualifiers for 'arm64_dma_phys_limit'
Drop the 'const' for now and use '__ro_after_init' consistently.
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/CA+CK2bDbbx=8R=UthkMesWOST8eJMtOGJdfMRTFSwVmo0Vn0EA@mail.gmail.com
Fixes: 031495635b46 ("arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones")
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/mm/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -87,7 +87,7 @@ EXPORT_SYMBOL(memstart_addr);
#if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32)
phys_addr_t __ro_after_init arm64_dma_phys_limit;
#else
-const phys_addr_t arm64_dma_phys_limit = PHYS_MASK + 1;
+phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1;
#endif
#ifdef CONFIG_KEXEC_CORE
From: Aharon Landau <[email protected]>
[ Upstream commit 2f0e60d5e9f96341a0c8a01be8878cdb3b29ff20 ]
When an ODP MR cache entry is empty and trying to allocate it, increment
the ent->miss counter and call to queue_adjust_cache_locked() to verify
the entry is balanced.
Fixes: aad719dcf379 ("RDMA/mlx5: Allow MRs to be created in the cache synchronously")
Link: https://lore.kernel.org/r/09503e295276dcacc92cb1d8aef1ad0961c99dc1.1644947594.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/mr.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 22e2f4d79743..7bb1b9d0941c 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -580,6 +580,8 @@ struct mlx5_ib_mr *mlx5_mr_cache_alloc(struct mlx5_ib_dev *dev,
ent = &cache->ent[entry];
spin_lock_irq(&ent->lock);
if (list_empty(&ent->head)) {
+ queue_adjust_cache_locked(ent);
+ ent->miss++;
spin_unlock_irq(&ent->lock);
mr = create_cache_mr(ent);
if (IS_ERR(mr))
--
2.34.1
From: Baokun Li <[email protected]>
commit 705757274599e2e064dd3054aabc74e8af31a095 upstream.
When renaming the whiteout file, the old whiteout file is not deleted.
Therefore, we add the old dentry size to the old dir like XFS.
Otherwise, an error may be reported due to `fscki->calc_sz != fscki->size`
in check_indes.
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Reported-by: Zhihao Cheng <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -1402,6 +1402,9 @@ static int do_rename(struct inode *old_d
iput(whiteout);
goto out_release;
}
+
+ /* Add the old_dentry size to the old_dir size. */
+ old_sz -= CALC_DENT_SIZE(fname_len(&old_nm));
}
lock_4_inodes(old_dir, new_dir, new_inode, whiteout);
From: Tedd Ho-Jeong An <[email protected]>
[ Upstream commit 55235304c2560d4a94ccfff2a47ea927b4114064 ]
This patch adds the flag to identify the Intel legacy ROM products that
don't support WBS like WP and StP.
Fixes: 3df4dfbec0f29 ("Bluetooth: btintel: Move hci quirks to setup routine")
Signed-off-by: Tedd Ho-Jeong An <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btintel.c | 11 ++++++++---
drivers/bluetooth/btintel.h | 1 +
drivers/bluetooth/btusb.c | 6 ++++++
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index e73d4c719b0a..d122cc973917 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -2263,10 +2263,15 @@ static int btintel_setup_combined(struct hci_dev *hdev)
/* Apply the device specific HCI quirks
*
- * WBS for SdP - SdP and Stp have a same hw_varaint but
- * different fw_variant
+ * WBS for SdP - For the Legacy ROM products, only SdP
+ * supports the WBS. But the version information is not
+ * enough to use here because the StP2 and SdP have same
+ * hw_variant and fw_variant. So, this flag is set by
+ * the transport driver (btusb) based on the HW info
+ * (idProduct)
*/
- if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
+ if (!btintel_test_flag(hdev,
+ INTEL_ROM_LEGACY_NO_WBS_SUPPORT))
set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
&hdev->quirks);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 704e3b7bcb77..2b85ebf63321 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -147,6 +147,7 @@ enum {
INTEL_BROKEN_INITIAL_NCMD,
INTEL_BROKEN_SHUTDOWN_LED,
INTEL_ROM_LEGACY,
+ INTEL_ROM_LEGACY_NO_WBS_SUPPORT,
__INTEL_NUM_FLAGS,
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0d5539066c0f..a68edbc7be0f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -61,6 +61,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_QCA_WCN6855 0x1000000
#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED 0x2000000
#define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000
+#define BTUSB_INTEL_NO_WBS_SUPPORT 0x8000000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -384,9 +385,11 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
+ BTUSB_INTEL_NO_WBS_SUPPORT |
BTUSB_INTEL_BROKEN_INITIAL_NCMD |
BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
+ BTUSB_INTEL_NO_WBS_SUPPORT |
BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
@@ -3863,6 +3866,9 @@ static int btusb_probe(struct usb_interface *intf,
hdev->send = btusb_send_frame_intel;
hdev->cmd_timeout = btusb_intel_cmd_timeout;
+ if (id->driver_info & BTUSB_INTEL_NO_WBS_SUPPORT)
+ btintel_set_flag(hdev, INTEL_ROM_LEGACY_NO_WBS_SUPPORT);
+
if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
--
2.34.1
From: Sreekanth Reddy <[email protected]>
[ Upstream commit 208cc9fe6f21112b5cc6cb87065fb8ab66e79316 ]
The driver must perform its 4GB boundary check using the pool's DMA address
instead of using the virtual address.
Link: https://lore.kernel.org/r/[email protected]
Fixes: d6adc251dd2f ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region")
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 0d37c4aca175..c38e68943205 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -5737,14 +5737,13 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
*/
static int
-mpt3sas_check_same_4gb_region(long reply_pool_start_address, u32 pool_sz)
+mpt3sas_check_same_4gb_region(dma_addr_t start_address, u32 pool_sz)
{
- long reply_pool_end_address;
+ dma_addr_t end_address;
- reply_pool_end_address = reply_pool_start_address + pool_sz;
+ end_address = start_address + pool_sz - 1;
- if (upper_32_bits(reply_pool_start_address) ==
- upper_32_bits(reply_pool_end_address))
+ if (upper_32_bits(start_address) == upper_32_bits(end_address))
return 1;
else
return 0;
@@ -5805,7 +5804,7 @@ _base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
}
if (!mpt3sas_check_same_4gb_region(
- (long)ioc->pcie_sg_lookup[i].pcie_sgl, sz)) {
+ ioc->pcie_sg_lookup[i].pcie_sgl_dma, sz)) {
ioc_err(ioc, "PCIE SGLs are not in same 4G !! pcie sgl (0x%p) dma = (0x%llx)\n",
ioc->pcie_sg_lookup[i].pcie_sgl,
(unsigned long long)
@@ -5860,8 +5859,8 @@ _base_allocate_chain_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
GFP_KERNEL, &ctr->chain_buffer_dma);
if (!ctr->chain_buffer)
return -EAGAIN;
- if (!mpt3sas_check_same_4gb_region((long)
- ctr->chain_buffer, ioc->chain_segment_sz)) {
+ if (!mpt3sas_check_same_4gb_region(
+ ctr->chain_buffer_dma, ioc->chain_segment_sz)) {
ioc_err(ioc,
"Chain buffers are not in same 4G !!! Chain buff (0x%p) dma = (0x%llx)\n",
ctr->chain_buffer,
@@ -5897,7 +5896,7 @@ _base_allocate_sense_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
GFP_KERNEL, &ioc->sense_dma);
if (!ioc->sense)
return -EAGAIN;
- if (!mpt3sas_check_same_4gb_region((long)ioc->sense, sz)) {
+ if (!mpt3sas_check_same_4gb_region(ioc->sense_dma, sz)) {
dinitprintk(ioc, pr_err(
"Bad Sense Pool! sense (0x%p) sense_dma = (0x%llx)\n",
ioc->sense, (unsigned long long) ioc->sense_dma));
@@ -5930,7 +5929,7 @@ _base_allocate_reply_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
&ioc->reply_dma);
if (!ioc->reply)
return -EAGAIN;
- if (!mpt3sas_check_same_4gb_region((long)ioc->reply_free, sz)) {
+ if (!mpt3sas_check_same_4gb_region(ioc->reply_dma, sz)) {
dinitprintk(ioc, pr_err(
"Bad Reply Pool! Reply (0x%p) Reply dma = (0x%llx)\n",
ioc->reply, (unsigned long long) ioc->reply_dma));
@@ -5965,7 +5964,7 @@ _base_allocate_reply_free_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
GFP_KERNEL, &ioc->reply_free_dma);
if (!ioc->reply_free)
return -EAGAIN;
- if (!mpt3sas_check_same_4gb_region((long)ioc->reply_free, sz)) {
+ if (!mpt3sas_check_same_4gb_region(ioc->reply_free_dma, sz)) {
dinitprintk(ioc,
pr_err("Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n",
ioc->reply_free, (unsigned long long) ioc->reply_free_dma));
@@ -6004,7 +6003,7 @@ _base_allocate_reply_post_free_array(struct MPT3SAS_ADAPTER *ioc,
GFP_KERNEL, &ioc->reply_post_free_array_dma);
if (!ioc->reply_post_free_array)
return -EAGAIN;
- if (!mpt3sas_check_same_4gb_region((long)ioc->reply_post_free_array,
+ if (!mpt3sas_check_same_4gb_region(ioc->reply_post_free_array_dma,
reply_post_free_array_sz)) {
dinitprintk(ioc, pr_err(
"Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n",
@@ -6069,7 +6068,7 @@ base_alloc_rdpq_dma_pool(struct MPT3SAS_ADAPTER *ioc, int sz)
* resources and set DMA mask to 32 and allocate.
*/
if (!mpt3sas_check_same_4gb_region(
- (long)ioc->reply_post[i].reply_post_free, sz)) {
+ ioc->reply_post[i].reply_post_free_dma, sz)) {
dinitprintk(ioc,
ioc_err(ioc, "bad Replypost free pool(0x%p)"
"reply_post_free_dma = (0x%llx)\n",
--
2.34.1
From: Rafał Miłecki <[email protected]>
[ Upstream commit 32942d33d63d27714ed16a4176e5a99547adb6e0 ]
Just like every other family BCM4908 should get its own enum value. That
is required to properly handle it in chipset conditional code.
The real change is excluding BCM4908 from the PLL reprogramming code
(see brcmusb_usb3_pll_54mhz()). I'm not sure what's the BCM4908
reference clock frequency but:
1. BCM4908 custom driver from Broadcom's SDK doesn't reprogram PLL
2. Doing that in Linux driver stopped PHY handling some USB 3.0 devices
This change makes USB 3.0 PHY recognize e.g.:
1. 04e8:6860 - Samsung Electronics Co., Ltd Galaxy series, misc. (MTP mode)
2. 1058:259f - Western Digital My Passport 259F
Broadcom's STB SoCs come with a set of SUN_TOP_CTRL_* registers that
allow reading chip family and product ids. Such a block & register is
missing on BCM4908 so this commit introduces "compatible" string
specific binding.
Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/broadcom/phy-brcm-usb-init.c | 36 ++++++++++++++++++++++++
drivers/phy/broadcom/phy-brcm-usb-init.h | 1 +
drivers/phy/broadcom/phy-brcm-usb.c | 11 +++++++-
3 files changed, 47 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
index 9391ab42a12b..dd0f66288fbd 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -79,6 +79,7 @@
enum brcm_family_type {
BRCM_FAMILY_3390A0,
+ BRCM_FAMILY_4908,
BRCM_FAMILY_7250B0,
BRCM_FAMILY_7271A0,
BRCM_FAMILY_7364A0,
@@ -96,6 +97,7 @@ enum brcm_family_type {
static const char *family_names[BRCM_FAMILY_COUNT] = {
USB_BRCM_FAMILY(3390A0),
+ USB_BRCM_FAMILY(4908),
USB_BRCM_FAMILY(7250B0),
USB_BRCM_FAMILY(7271A0),
USB_BRCM_FAMILY(7364A0),
@@ -203,6 +205,27 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
},
+ /* 4908 */
+ [BRCM_FAMILY_4908] = {
+ 0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
+ 0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
+ 0, /* USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
+ 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+ 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
+ 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+ 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+ USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+ USB_CTRL_USB_PM_USB_PWRDN_MASK,
+ 0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+ 0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+ 0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+ 0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+ 0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+ 0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+ 0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+ 0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK */
+ 0, /* USB_CTRL_SETUP ENDIAN bits */
+ },
/* 7250b0 */
[BRCM_FAMILY_7250B0] = {
USB_CTRL_SETUP_SCB1_EN_MASK,
@@ -559,6 +582,7 @@ static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params)
*/
switch (params->selected_family) {
case BRCM_FAMILY_3390A0:
+ case BRCM_FAMILY_4908:
case BRCM_FAMILY_7250B0:
case BRCM_FAMILY_7366C0:
case BRCM_FAMILY_74371A0:
@@ -1004,6 +1028,18 @@ static const struct brcm_usb_init_ops bcm7445_ops = {
.set_dual_select = usb_set_dual_select,
};
+void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params)
+{
+ int fam;
+
+ fam = BRCM_FAMILY_4908;
+ params->selected_family = fam;
+ params->usb_reg_bits_map =
+ &usb_reg_bits_map_table[fam][0];
+ params->family_name = family_names[fam];
+ params->ops = &bcm7445_ops;
+}
+
void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)
{
int fam;
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h
index a39f30fa2e99..1ccb5ddab865 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init.h
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
@@ -64,6 +64,7 @@ struct brcm_usb_init_params {
bool suspend_with_clocks;
};
+void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params);
void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params);
void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params);
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 0f1deb6e0eab..2cb3779fcdf8 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -283,6 +283,15 @@ static const struct attribute_group brcm_usb_phy_group = {
.attrs = brcm_usb_phy_attrs,
};
+static const struct match_chip_info chip_info_4908 = {
+ .init_func = &brcm_usb_dvr_init_4908,
+ .required_regs = {
+ BRCM_REGS_CTRL,
+ BRCM_REGS_XHCI_EC,
+ -1,
+ },
+};
+
static const struct match_chip_info chip_info_7216 = {
.init_func = &brcm_usb_dvr_init_7216,
.required_regs = {
@@ -318,7 +327,7 @@ static const struct match_chip_info chip_info_7445 = {
static const struct of_device_id brcm_usb_dt_ids[] = {
{
.compatible = "brcm,bcm4908-usb-phy",
- .data = &chip_info_7445,
+ .data = &chip_info_4908,
},
{
.compatible = "brcm,bcm7216-usb-phy",
--
2.34.1
From: Maxime Ripard <[email protected]>
commit dca384a3bf5af1c781cfa6aec63904bdb5018c36 upstream.
Commit 4adc33f36d80 ("drm/edid: Split deep color modes between RGB and
YUV444") introduced two new variables in struct drm_display_info and
their documentation, but the documentation part had a typo resulting in
a doc build warning.
Fixes: 4adc33f36d80 ("drm/edid: Split deep color modes between RGB and YUV444")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Simon Ser <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/drm/drm_connector.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -566,13 +566,13 @@ struct drm_display_info {
bool rgb_quant_range_selectable;
/**
- * @edid_hdmi_dc_rgb444_modes: Mask of supported hdmi deep color modes
+ * @edid_hdmi_rgb444_dc_modes: Mask of supported hdmi deep color modes
* in RGB 4:4:4. Even more stuff redundant with @bus_formats.
*/
u8 edid_hdmi_rgb444_dc_modes;
/**
- * @edid_hdmi_dc_ycbcr444_modes: Mask of supported hdmi deep color
+ * @edid_hdmi_ycbcr444_dc_modes: Mask of supported hdmi deep color
* modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats.
*/
u8 edid_hdmi_ycbcr444_dc_modes;
From: Zhihao Cheng <[email protected]>
commit c3c07fc25f37c157fde041b3a0c3dfcb1590cbce upstream.
Abort fastmap scanning and return error code if memory allocation fails
in add_aeb(). Otherwise ubi will get wrong peb statistics information
after scanning.
Fixes: dbb7d2a88d2a7b ("UBI: Add fastmap core")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/ubi/fastmap.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
--- a/drivers/mtd/ubi/fastmap.c
+++ b/drivers/mtd/ubi/fastmap.c
@@ -468,7 +468,9 @@ static int scan_pool(struct ubi_device *
if (err == UBI_IO_FF_BITFLIPS)
scrub = 1;
- add_aeb(ai, free, pnum, ec, scrub);
+ ret = add_aeb(ai, free, pnum, ec, scrub);
+ if (ret)
+ goto out;
continue;
} else if (err == 0 || err == UBI_IO_BITFLIPS) {
dbg_bld("Found non empty PEB:%i in pool", pnum);
@@ -638,8 +640,10 @@ static int ubi_attach_fastmap(struct ubi
if (fm_pos >= fm_size)
goto fail_bad;
- add_aeb(ai, &ai->free, be32_to_cpu(fmec->pnum),
- be32_to_cpu(fmec->ec), 0);
+ ret = add_aeb(ai, &ai->free, be32_to_cpu(fmec->pnum),
+ be32_to_cpu(fmec->ec), 0);
+ if (ret)
+ goto fail;
}
/* read EC values from used list */
@@ -649,8 +653,10 @@ static int ubi_attach_fastmap(struct ubi
if (fm_pos >= fm_size)
goto fail_bad;
- add_aeb(ai, &used, be32_to_cpu(fmec->pnum),
- be32_to_cpu(fmec->ec), 0);
+ ret = add_aeb(ai, &used, be32_to_cpu(fmec->pnum),
+ be32_to_cpu(fmec->ec), 0);
+ if (ret)
+ goto fail;
}
/* read EC values from scrub list */
@@ -660,8 +666,10 @@ static int ubi_attach_fastmap(struct ubi
if (fm_pos >= fm_size)
goto fail_bad;
- add_aeb(ai, &used, be32_to_cpu(fmec->pnum),
- be32_to_cpu(fmec->ec), 1);
+ ret = add_aeb(ai, &used, be32_to_cpu(fmec->pnum),
+ be32_to_cpu(fmec->ec), 1);
+ if (ret)
+ goto fail;
}
/* read EC values from erase list */
@@ -671,8 +679,10 @@ static int ubi_attach_fastmap(struct ubi
if (fm_pos >= fm_size)
goto fail_bad;
- add_aeb(ai, &ai->erase, be32_to_cpu(fmec->pnum),
- be32_to_cpu(fmec->ec), 1);
+ ret = add_aeb(ai, &ai->erase, be32_to_cpu(fmec->pnum),
+ be32_to_cpu(fmec->ec), 1);
+ if (ret)
+ goto fail;
}
ai->mean_ec = div_u64(ai->ec_sum, ai->ec_count);
From: Hans de Goede <[email protected]>
[ Upstream commit f7731754fdce33dad19be746f647d6ac47c5d695 ]
The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can
have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator)
mode.
Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es
uses 11 when enabling the regulator at boot.
Make bq24190_vbus_is_enabled() also check for 11 so that it does not
wrongly returns false when the bits are set to 11.
Fixes: 66b6bef2c4e0 ("power: supply: bq24190_charger: Export 5V boost converter as regulator")
Cc: Bastien Nocera <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/bq24190_charger.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 35ff0c8fe96f..16c4876fe5af 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -39,6 +39,7 @@
#define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0
#define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1
#define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2
+#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT 0x3
#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1))
#define BQ24190_REG_POC_SYS_MIN_SHIFT 1
#define BQ24190_REG_POC_SYS_MIN_MIN 3000
@@ -550,7 +551,11 @@ static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
- return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
+ if (ret)
+ return ret;
+
+ return (val == BQ24190_REG_POC_CHG_CONFIG_OTG ||
+ val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT);
}
static const struct regulator_ops bq24190_vbus_ops = {
--
2.34.1
On 4/5/22 1:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.33-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Build failed on my system. The following is the problem commit. There
are no changes to the config between 5.15.32 and this build.
Ranjani Sridharan <[email protected]>
ASoC: SOF: Intel: hda: Remove link assignment limitation
CC [M] sound/soc/sof/intel/hda-dai.o
sound/soc/sof/intel/hda-dai.c: In function ‘hda_link_stream_assign’:
sound/soc/sof/intel/hda-dai.c:86:24: error: implicit declaration of function ‘get_chip_info’; did you mean ‘get_group_info’? [-Werror=implicit-function-declaration]
86 | chip = get_chip_info(sdev->pdata);
| ^~~~~~~~~~~~~
| get_group_info
sound/soc/sof/intel/hda-dai.c:86:22: error: assignment to ‘const struct sof_intel_dsp_desc *’ from ‘int’ makes pointer from integer without a cast [-Werror=int-conversion]
86 | chip = get_chip_info(sdev->pdata);
| ^
sound/soc/sof/intel/hda-dai.c:94:35: error: ‘const struct sof_intel_dsp_desc’ has no member named ‘quirks’
94 | if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) {
| ^~
sound/soc/sof/intel/hda-dai.c:94:46: error: ‘SOF_INTEL_PROCEN_FMT_QUIRK’ undeclared (first use in this function)
94 | if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/sof/intel/hda-dai.c:94:46: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
make[4]: *** [scripts/Makefile.build:287: sound/soc/sof/intel/hda-dai.o] Error 1
make[3]: *** [scripts/Makefile.build:549: sound/soc/sof/intel] Error 2
make[2]: *** [scripts/Makefile.build:549: sound/soc/sof] Error 2
make[1]: *** [scripts/Makefile.build:549: sound/soc] Error 2
make: *** [Makefile:1846: sound] Error 2
thanks,
-- Shuah
From: Roman Li <[email protected]>
[ Upstream commit 128f8ed5902a287a6bb4afe0ffdae8a80b2a64ec ]
[Why]
When display topology changed on DSC hub we add all crtcs with dsc support to
atomic state.
Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors"
However the original implementation may skip crtc if the topology change
caused by unplug.
That potentially could lead to no-lightup or corruption on DSC hub after
unplug event on one of the connectors.
[How]
Update add_affected_mst_dsc_crtcs() to use old connector state
if new connector state has no crtc (undergoes modeset due to unplug)
Fixes: 44be939ff7ac58 ("drm/amd/display: Trigger modesets on MST DSC connectors")
Reviewed-by: Hersen Wu <[email protected]>
Acked-by: Jasdeep Dhillon <[email protected]>
Signed-off-by: Roman Li <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 7983c01c007d..b9859e52ad92 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -10226,10 +10226,13 @@ static int dm_check_crtc_cursor(struct drm_atomic_state *state,
static int add_affected_mst_dsc_crtcs(struct drm_atomic_state *state, struct drm_crtc *crtc)
{
struct drm_connector *connector;
- struct drm_connector_state *conn_state;
+ struct drm_connector_state *conn_state, *old_conn_state;
struct amdgpu_dm_connector *aconnector = NULL;
int i;
- for_each_new_connector_in_state(state, connector, conn_state, i) {
+ for_each_oldnew_connector_in_state(state, connector, old_conn_state, conn_state, i) {
+ if (!conn_state->crtc)
+ conn_state = old_conn_state;
+
if (conn_state->crtc != crtc)
continue;
--
2.34.1
From: Dongliang Mu <[email protected]>
[ Upstream commit 714fbf2647b1a33d914edd695d4da92029c7e7c0 ]
ntfs_read_inode_mount invokes ntfs_malloc_nofs with zero allocation
size. It triggers one BUG in the __ntfs_malloc function.
Fix this by adding sanity check on ni->attr_list_size.
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: [email protected]
Signed-off-by: Dongliang Mu <[email protected]>
Acked-by: Anton Altaparmakov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ntfs/inode.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 4474adb393ca..517b71c73aa9 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -1881,6 +1881,10 @@ int ntfs_read_inode_mount(struct inode *vi)
}
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
+ if (!ni->attr_list_size) {
+ ntfs_error(sb, "Attr_list_size is zero");
+ goto put_err_out;
+ }
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
if (!ni->attr_list) {
ntfs_error(sb, "Not enough memory to allocate buffer "
--
2.34.1
From: Jiaxin Yu <[email protected]>
commit a7663c89f4193dbf717572e46e5a3251940dbdc8 upstream.
Fixes the following build errors when mt6358 is configured as module:
>> ERROR: modpost: "mt6358_set_mtkaif_protocol"
>> [sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.ko] undefined!
>> ERROR: modpost: "mt6358_set_mtkaif_protocol"
>> [sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.ko] undefined!
Fixes: 6a8d4198ca80 ("ASoC: mediatek: mt6358: add codec driver")
Signed-off-by: Jiaxin Yu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/mt6358.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/sound/soc/codecs/mt6358.c
+++ b/sound/soc/codecs/mt6358.c
@@ -107,6 +107,7 @@ int mt6358_set_mtkaif_protocol(struct sn
priv->mtkaif_protocol = mtkaif_protocol;
return 0;
}
+EXPORT_SYMBOL_GPL(mt6358_set_mtkaif_protocol);
static void playback_gpio_set(struct mt6358_priv *priv)
{
@@ -273,6 +274,7 @@ int mt6358_mtkaif_calibration_enable(str
1 << RG_AUD_PAD_TOP_DAT_MISO_LOOPBACK_SFT);
return 0;
}
+EXPORT_SYMBOL_GPL(mt6358_mtkaif_calibration_enable);
int mt6358_mtkaif_calibration_disable(struct snd_soc_component *cmpnt)
{
@@ -296,6 +298,7 @@ int mt6358_mtkaif_calibration_disable(st
capture_gpio_reset(priv);
return 0;
}
+EXPORT_SYMBOL_GPL(mt6358_mtkaif_calibration_disable);
int mt6358_set_mtkaif_calibration_phase(struct snd_soc_component *cmpnt,
int phase_1, int phase_2)
@@ -310,6 +313,7 @@ int mt6358_set_mtkaif_calibration_phase(
phase_2 << RG_AUD_PAD_TOP_PHASE_MODE2_SFT);
return 0;
}
+EXPORT_SYMBOL_GPL(mt6358_set_mtkaif_calibration_phase);
/* dl pga gain */
enum {
From: Steven Rostedt (Google) <[email protected]>
[ Upstream commit b3bc8547d3be60898818885f5bf22d0a62e2eb48 ]
The macro TRACE_DEFINE_ENUM is used to convert enums in the kernel to
their actual value when they are exported to user space via the trace
event format file.
Currently only the enums in the "print fmt" (TP_printk in the TRACE_EVENT
macro) have the enums converted. But the enums can be used to denote array
size:
field:unsigned int fc_ineligible_rc[EXT4_FC_REASON_MAX]; offset:12; size:36; signed:0;
The EXT4_FC_REASON_MAX has no meaning to userspace but it needs to know
that information to know how to parse the array.
Have the array indexes also be parsed as well.
Link: https://lore.kernel.org/all/[email protected]/
Reported-by: Ritesh Harjani <[email protected]>
Tested-by: Ritesh Harjani <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace_events.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index dd17171829d6..b35a66a8e7ce 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -2637,6 +2637,33 @@ static void update_event_printk(struct trace_event_call *call,
}
}
+static void update_event_fields(struct trace_event_call *call,
+ struct trace_eval_map *map)
+{
+ struct ftrace_event_field *field;
+ struct list_head *head;
+ char *ptr;
+ int len = strlen(map->eval_string);
+
+ head = trace_get_fields(call);
+ list_for_each_entry(field, head, link) {
+ ptr = strchr(field->type, '[');
+ if (!ptr)
+ continue;
+ ptr++;
+
+ if (!isalpha(*ptr) && *ptr != '_')
+ continue;
+
+ if (strncmp(map->eval_string, ptr, len) != 0)
+ continue;
+
+ ptr = eval_replace(ptr, map, len);
+ /* enum/sizeof string smaller than value */
+ WARN_ON_ONCE(!ptr);
+ }
+}
+
void trace_event_eval_update(struct trace_eval_map **map, int len)
{
struct trace_event_call *call, *p;
@@ -2672,6 +2699,7 @@ void trace_event_eval_update(struct trace_eval_map **map, int len)
first = false;
}
update_event_printk(call, map[i]);
+ update_event_fields(call, map[i]);
}
}
}
--
2.34.1
From: Namhyung Kim <[email protected]>
commit ee2a098851bfbe8bcdd964c0121f4246f00ff41e upstream.
Let's say that the caller has storage for num_elem stack frames. Then,
the BPF stack helper functions walk the stack for only num_elem frames.
This means that if skip > 0, one keeps only 'num_elem - skip' frames.
This is because it sets init_nr in the perf_callchain_entry to the end
of the buffer to save num_elem entries only. I believe it was because
the perf callchain code unwound the stack frames until it reached the
global max size (sysctl_perf_event_max_stack).
However it now has perf_callchain_entry_ctx.max_stack to limit the
iteration locally. This simplifies the code to handle init_nr in the
BPF callstack entries and removes the confusion with the perf_event's
__PERF_SAMPLE_CALLCHAIN_EARLY which sets init_nr to 0.
Also change the comment on bpf_get_stack() in the header file to be
more explicit what the return value means.
Fixes: c195651e565a ("bpf: add bpf_get_stack helper")
Signed-off-by: Namhyung Kim <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Based-on-patch-by: Eugene Loh <[email protected]>
---
include/uapi/linux/bpf.h | 8 +++---
kernel/bpf/stackmap.c | 56 ++++++++++++++++++++---------------------------
2 files changed, 28 insertions(+), 36 deletions(-)
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -2965,8 +2965,8 @@ union bpf_attr {
*
* # sysctl kernel.perf_event_max_stack=<new value>
* Return
- * A non-negative value equal to or less than *size* on success,
- * or a negative error in case of failure.
+ * The non-negative copied *buf* length equal to or less than
+ * *size* on success, or a negative error in case of failure.
*
* long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header)
* Description
@@ -4269,8 +4269,8 @@ union bpf_attr {
*
* # sysctl kernel.perf_event_max_stack=<new value>
* Return
- * A non-negative value equal to or less than *size* on success,
- * or a negative error in case of failure.
+ * The non-negative copied *buf* length equal to or less than
+ * *size* on success, or a negative error in case of failure.
*
* long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags)
* Description
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -219,7 +219,7 @@ static void stack_map_get_build_id_offse
}
static struct perf_callchain_entry *
-get_callchain_entry_for_task(struct task_struct *task, u32 init_nr)
+get_callchain_entry_for_task(struct task_struct *task, u32 max_depth)
{
#ifdef CONFIG_STACKTRACE
struct perf_callchain_entry *entry;
@@ -230,9 +230,8 @@ get_callchain_entry_for_task(struct task
if (!entry)
return NULL;
- entry->nr = init_nr +
- stack_trace_save_tsk(task, (unsigned long *)(entry->ip + init_nr),
- sysctl_perf_event_max_stack - init_nr, 0);
+ entry->nr = stack_trace_save_tsk(task, (unsigned long *)entry->ip,
+ max_depth, 0);
/* stack_trace_save_tsk() works on unsigned long array, while
* perf_callchain_entry uses u64 array. For 32-bit systems, it is
@@ -244,7 +243,7 @@ get_callchain_entry_for_task(struct task
int i;
/* copy data from the end to avoid using extra buffer */
- for (i = entry->nr - 1; i >= (int)init_nr; i--)
+ for (i = entry->nr - 1; i >= 0; i--)
to[i] = (u64)(from[i]);
}
@@ -261,27 +260,19 @@ static long __bpf_get_stackid(struct bpf
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
struct stack_map_bucket *bucket, *new_bucket, *old_bucket;
- u32 max_depth = map->value_size / stack_map_data_size(map);
- /* stack_map_alloc() checks that max_depth <= sysctl_perf_event_max_stack */
- u32 init_nr = sysctl_perf_event_max_stack - max_depth;
u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
u32 hash, id, trace_nr, trace_len;
bool user = flags & BPF_F_USER_STACK;
u64 *ips;
bool hash_matches;
- /* get_perf_callchain() guarantees that trace->nr >= init_nr
- * and trace-nr <= sysctl_perf_event_max_stack, so trace_nr <= max_depth
- */
- trace_nr = trace->nr - init_nr;
-
- if (trace_nr <= skip)
+ if (trace->nr <= skip)
/* skipping more than usable stack trace */
return -EFAULT;
- trace_nr -= skip;
+ trace_nr = trace->nr - skip;
trace_len = trace_nr * sizeof(u64);
- ips = trace->ip + skip + init_nr;
+ ips = trace->ip + skip;
hash = jhash2((u32 *)ips, trace_len / sizeof(u32), 0);
id = hash & (smap->n_buckets - 1);
bucket = READ_ONCE(smap->buckets[id]);
@@ -338,8 +329,7 @@ BPF_CALL_3(bpf_get_stackid, struct pt_re
u64, flags)
{
u32 max_depth = map->value_size / stack_map_data_size(map);
- /* stack_map_alloc() checks that max_depth <= sysctl_perf_event_max_stack */
- u32 init_nr = sysctl_perf_event_max_stack - max_depth;
+ u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
bool user = flags & BPF_F_USER_STACK;
struct perf_callchain_entry *trace;
bool kernel = !user;
@@ -348,8 +338,12 @@ BPF_CALL_3(bpf_get_stackid, struct pt_re
BPF_F_FAST_STACK_CMP | BPF_F_REUSE_STACKID)))
return -EINVAL;
- trace = get_perf_callchain(regs, init_nr, kernel, user,
- sysctl_perf_event_max_stack, false, false);
+ max_depth += skip;
+ if (max_depth > sysctl_perf_event_max_stack)
+ max_depth = sysctl_perf_event_max_stack;
+
+ trace = get_perf_callchain(regs, 0, kernel, user, max_depth,
+ false, false);
if (unlikely(!trace))
/* couldn't fetch the stack trace */
@@ -440,7 +434,7 @@ static long __bpf_get_stack(struct pt_re
struct perf_callchain_entry *trace_in,
void *buf, u32 size, u64 flags)
{
- u32 init_nr, trace_nr, copy_len, elem_size, num_elem;
+ u32 trace_nr, copy_len, elem_size, num_elem, max_depth;
bool user_build_id = flags & BPF_F_USER_BUILD_ID;
u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
bool user = flags & BPF_F_USER_STACK;
@@ -465,30 +459,28 @@ static long __bpf_get_stack(struct pt_re
goto err_fault;
num_elem = size / elem_size;
- if (sysctl_perf_event_max_stack < num_elem)
- init_nr = 0;
- else
- init_nr = sysctl_perf_event_max_stack - num_elem;
+ max_depth = num_elem + skip;
+ if (sysctl_perf_event_max_stack < max_depth)
+ max_depth = sysctl_perf_event_max_stack;
if (trace_in)
trace = trace_in;
else if (kernel && task)
- trace = get_callchain_entry_for_task(task, init_nr);
+ trace = get_callchain_entry_for_task(task, max_depth);
else
- trace = get_perf_callchain(regs, init_nr, kernel, user,
- sysctl_perf_event_max_stack,
+ trace = get_perf_callchain(regs, 0, kernel, user, max_depth,
false, false);
if (unlikely(!trace))
goto err_fault;
- trace_nr = trace->nr - init_nr;
- if (trace_nr < skip)
+ if (trace->nr < skip)
goto err_fault;
- trace_nr -= skip;
+ trace_nr = trace->nr - skip;
trace_nr = (trace_nr <= num_elem) ? trace_nr : num_elem;
copy_len = trace_nr * elem_size;
- ips = trace->ip + skip + init_nr;
+
+ ips = trace->ip + skip;
if (user && user_build_id)
stack_map_get_build_id_offset(buf, ips, trace_nr, user);
else
From: Wang Wensheng <[email protected]>
[ Upstream commit 3b891513f95cba3944e72c1139ea706d04f3781b ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7e7292dba215 ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Wang Wensheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-es8328.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/imx-es8328.c b/sound/soc/fsl/imx-es8328.c
index 1981dcd7e930..a7fb53e0f96f 100644
--- a/sound/soc/fsl/imx-es8328.c
+++ b/sound/soc/fsl/imx-es8328.c
@@ -87,6 +87,7 @@ static int imx_es8328_probe(struct platform_device *pdev)
if (int_port > MUX_PORT_MAX || int_port == 0) {
dev_err(dev, "mux-int-port: hardware only has %d mux ports\n",
MUX_PORT_MAX);
+ ret = -EINVAL;
goto fail;
}
--
2.34.1
From: Yonghua Huang <[email protected]>
[ Upstream commit 8a6e85f75a83d16a71077e41f2720c691f432002 ]
acrn_vm_ram_map can't pin the user pages with VM_PFNMAP flag
by calling get_user_pages_fast(), the PA(physical pages)
may be mapped by kernel driver and set PFNMAP flag.
This patch fixes logic to setup EPT mapping for PFN mapped RAM region
by checking the memory attribute before adding EPT mapping for them.
Fixes: 88f537d5e8dd ("virt: acrn: Introduce EPT mapping management")
Signed-off-by: Yonghua Huang <[email protected]>
Signed-off-by: Fei Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/virt/acrn/mm.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/virt/acrn/mm.c b/drivers/virt/acrn/mm.c
index c4f2e15c8a2b..3b1b1e7a844b 100644
--- a/drivers/virt/acrn/mm.c
+++ b/drivers/virt/acrn/mm.c
@@ -162,10 +162,34 @@ int acrn_vm_ram_map(struct acrn_vm *vm, struct acrn_vm_memmap *memmap)
void *remap_vaddr;
int ret, pinned;
u64 user_vm_pa;
+ unsigned long pfn;
+ struct vm_area_struct *vma;
if (!vm || !memmap)
return -EINVAL;
+ mmap_read_lock(current->mm);
+ vma = vma_lookup(current->mm, memmap->vma_base);
+ if (vma && ((vma->vm_flags & VM_PFNMAP) != 0)) {
+ if ((memmap->vma_base + memmap->len) > vma->vm_end) {
+ mmap_read_unlock(current->mm);
+ return -EINVAL;
+ }
+
+ ret = follow_pfn(vma, memmap->vma_base, &pfn);
+ mmap_read_unlock(current->mm);
+ if (ret < 0) {
+ dev_dbg(acrn_dev.this_device,
+ "Failed to lookup PFN at VMA:%pK.\n", (void *)memmap->vma_base);
+ return ret;
+ }
+
+ return acrn_mm_region_add(vm, memmap->user_vm_pa,
+ PFN_PHYS(pfn), memmap->len,
+ ACRN_MEM_TYPE_WB, memmap->attr);
+ }
+ mmap_read_unlock(current->mm);
+
/* Get the page number of the map region */
nr_pages = memmap->len >> PAGE_SHIFT;
pages = vzalloc(nr_pages * sizeof(struct page *));
--
2.34.1
From: Hangyu Hua <[email protected]>
commit 04c9b00ba83594a29813d6b1fb8fdc93a3915174 upstream.
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Hangyu Hua <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/mcba_usb.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -368,7 +368,6 @@ static netdev_tx_t mcba_usb_start_xmit(s
xmit_failed:
can_free_echo_skb(priv->netdev, ctx->ndx, NULL);
mcba_usb_free_ctx(ctx);
- dev_kfree_skb(skb);
stats->tx_dropped++;
return NETDEV_TX_OK;
From: Dan Carpenter <[email protected]>
[ Upstream commit 6f6dbb819dfc1a35bcb8b709b5c83a3ea8beff75 ]
My static checker complains that:
drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init()
warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'?
It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware
in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could
be zero. Even if we trust the firmware, it's easy enough to change the
condition just as a hardenning measure.
Fixes: 3f49d6842569 ("RDMA/irdma: Implement HW Admin Queue OPs")
Link: https://lore.kernel.org/r/20220307125928.GE16710@kili
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/irdma/ctrl.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/infiniband/hw/irdma/ctrl.c b/drivers/infiniband/hw/irdma/ctrl.c
index f1e5515256e0..1ac7067e21be 100644
--- a/drivers/infiniband/hw/irdma/ctrl.c
+++ b/drivers/infiniband/hw/irdma/ctrl.c
@@ -431,7 +431,7 @@ enum irdma_status_code irdma_sc_qp_create(struct irdma_sc_qp *qp, struct irdma_c
cqp = qp->dev->cqp;
if (qp->qp_uk.qp_id < cqp->dev->hw_attrs.min_hw_qp_id ||
- qp->qp_uk.qp_id > (cqp->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_QP].max_cnt - 1))
+ qp->qp_uk.qp_id >= (cqp->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_QP].max_cnt))
return IRDMA_ERR_INVALID_QP_ID;
wqe = irdma_sc_cqp_get_next_send_wqe(cqp, scratch);
@@ -2551,10 +2551,10 @@ static enum irdma_status_code irdma_sc_cq_create(struct irdma_sc_cq *cq,
enum irdma_status_code ret_code = 0;
cqp = cq->dev->cqp;
- if (cq->cq_uk.cq_id > (cqp->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_CQ].max_cnt - 1))
+ if (cq->cq_uk.cq_id >= (cqp->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_CQ].max_cnt))
return IRDMA_ERR_INVALID_CQ_ID;
- if (cq->ceq_id > (cq->dev->hmc_fpm_misc.max_ceqs - 1))
+ if (cq->ceq_id >= (cq->dev->hmc_fpm_misc.max_ceqs))
return IRDMA_ERR_INVALID_CEQ_ID;
ceq = cq->dev->ceq[cq->ceq_id];
@@ -3656,7 +3656,7 @@ enum irdma_status_code irdma_sc_ceq_init(struct irdma_sc_ceq *ceq,
info->elem_cnt > info->dev->hw_attrs.max_hw_ceq_size)
return IRDMA_ERR_INVALID_SIZE;
- if (info->ceq_id > (info->dev->hmc_fpm_misc.max_ceqs - 1))
+ if (info->ceq_id >= (info->dev->hmc_fpm_misc.max_ceqs))
return IRDMA_ERR_INVALID_CEQ_ID;
pble_obj_cnt = info->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_PBLE].cnt;
@@ -4205,7 +4205,7 @@ enum irdma_status_code irdma_sc_ccq_init(struct irdma_sc_cq *cq,
info->num_elem > info->dev->hw_attrs.uk_attrs.max_hw_cq_size)
return IRDMA_ERR_INVALID_SIZE;
- if (info->ceq_id > (info->dev->hmc_fpm_misc.max_ceqs - 1))
+ if (info->ceq_id >= (info->dev->hmc_fpm_misc.max_ceqs ))
return IRDMA_ERR_INVALID_CEQ_ID;
pble_obj_cnt = info->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_PBLE].cnt;
--
2.34.1
From: Felix Maurer <[email protected]>
[ Upstream commit 8c0be0631d81e48f77d0ebf0534c86e32bef5f89 ]
The bind_perm BPF selftest failed when port 111/tcp was already in use
during the test. To fix this, the test now runs in its own network name
space.
To use unshare, it is necessary to reorder the includes. The style of
the includes is adapted to be consistent with the other prog_tests.
v2: Replace deprecated CHECK macro with ASSERT_OK
Fixes: 8259fdeb30326 ("selftests/bpf: Verify that rebinding to port < 1024 from BPF works")
Signed-off-by: Felix Maurer <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Jakub Sitnicki <[email protected]>
Link: https://lore.kernel.org/bpf/551ee65533bb987a43f93d88eaf2368b416ccd32.1642518457.git.fmaurer@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
.../selftests/bpf/prog_tests/bind_perm.c | 20 ++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/bind_perm.c b/tools/testing/selftests/bpf/prog_tests/bind_perm.c
index d0f06e40c16d..eac71fbb24ce 100644
--- a/tools/testing/selftests/bpf/prog_tests/bind_perm.c
+++ b/tools/testing/selftests/bpf/prog_tests/bind_perm.c
@@ -1,13 +1,24 @@
// SPDX-License-Identifier: GPL-2.0
-#include <test_progs.h>
-#include "bind_perm.skel.h"
-
+#define _GNU_SOURCE
+#include <sched.h>
+#include <stdlib.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/capability.h>
+#include "test_progs.h"
+#include "bind_perm.skel.h"
+
static int duration;
+static int create_netns(void)
+{
+ if (!ASSERT_OK(unshare(CLONE_NEWNET), "create netns"))
+ return -1;
+
+ return 0;
+}
+
void try_bind(int family, int port, int expected_errno)
{
struct sockaddr_storage addr = {};
@@ -75,6 +86,9 @@ void test_bind_perm(void)
struct bind_perm *skel;
int cgroup_fd;
+ if (create_netns())
+ return;
+
cgroup_fd = test__join_cgroup("/bind_perm");
if (CHECK(cgroup_fd < 0, "cg-join", "errno %d", errno))
return;
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit fee5c1e4b789e41719af9fee0e2dd397cd31988f ]
If "sinfo->config" is not found, then return -ENODEV. Don't
return success.
Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/atmel_lcdfb.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index 355b6120dc4f..1fc8de4ecbeb 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1062,15 +1062,16 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&info->modelist);
- if (pdev->dev.of_node) {
- ret = atmel_lcdfb_of_init(sinfo);
- if (ret)
- goto free_info;
- } else {
+ if (!pdev->dev.of_node) {
dev_err(dev, "cannot get default configuration\n");
goto free_info;
}
+ ret = atmel_lcdfb_of_init(sinfo);
+ if (ret)
+ goto free_info;
+
+ ret = -ENODEV;
if (!sinfo->config)
goto free_info;
--
2.34.1
From: Muhammad Usama Anjum <[email protected]>
[ Upstream commit 1900be289b598b2c553b3add13e491c0bb8a8550 ]
UBSAN_BOUNDS and UBSAN_TRAP depend on UBSAN config option.
merge_config.sh script generates following warnings if parent config
doesn't have UBSAN config already enabled and UBSAN_BOUNDS/UBSAN_TRAP
config options don't get added to the parent config.
Value requested for CONFIG_UBSAN_BOUNDS not in final .config
Requested value: CONFIG_UBSAN_BOUNDS=y
Actual value:
Value requested for CONFIG_UBSAN_TRAP not in final .config
Requested value: CONFIG_UBSAN_TRAP=y
Actual value:
Fix this by including UBSAN config.
Fixes: c75be56e35b2 ("lkdtm/bugs: Add ARRAY_BOUNDS to selftests")
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/lkdtm/config | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/lkdtm/config b/tools/testing/selftests/lkdtm/config
index 38edea25631b..b642411ceb6c 100644
--- a/tools/testing/selftests/lkdtm/config
+++ b/tools/testing/selftests/lkdtm/config
@@ -6,5 +6,6 @@ CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
+CONFIG_UBSAN=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_TRAP=y
--
2.34.1
From: Rob Clark <[email protected]>
[ Upstream commit cca96584b35765bf9eb5f38ca55a144ea2ba0de4 ]
Fixes: f6d62d091cfd ("drm/msm/a6xx: add support for Adreno 660 GPU")
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index b681c45520bb..f54bfdb1ebff 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -658,19 +658,23 @@ static void a6xx_set_cp_protect(struct msm_gpu *gpu)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
const u32 *regs = a6xx_protect;
- unsigned i, count = ARRAY_SIZE(a6xx_protect), count_max = 32;
-
- BUILD_BUG_ON(ARRAY_SIZE(a6xx_protect) > 32);
- BUILD_BUG_ON(ARRAY_SIZE(a650_protect) > 48);
+ unsigned i, count, count_max;
if (adreno_is_a650(adreno_gpu)) {
regs = a650_protect;
count = ARRAY_SIZE(a650_protect);
count_max = 48;
+ BUILD_BUG_ON(ARRAY_SIZE(a650_protect) > 48);
} else if (adreno_is_a660_family(adreno_gpu)) {
regs = a660_protect;
count = ARRAY_SIZE(a660_protect);
count_max = 48;
+ BUILD_BUG_ON(ARRAY_SIZE(a660_protect) > 48);
+ } else {
+ regs = a6xx_protect;
+ count = ARRAY_SIZE(a6xx_protect);
+ count_max = 32;
+ BUILD_BUG_ON(ARRAY_SIZE(a6xx_protect) > 32);
}
/*
--
2.34.1
From: Yinjun Zhang <[email protected]>
[ Upstream commit edc21dc909c6c133a2727f063eadd7907af51f94 ]
When reworking btf__get_from_id() in commit a19f93cfafdf the error
handling when calling bpf_btf_get_fd_by_id() changed. Before the rework
if bpf_btf_get_fd_by_id() failed the error would not be propagated to
callers of btf__get_from_id(), after the rework it is. This lead to a
change in behavior in print_key_value() that now prints an error when
trying to lookup keys in maps with no btf available.
Fix this by following the way used in dumping maps to allow to look up
keys in no-btf maps, by which it decides whether and where to get the
btf info according to the btf value type.
Fixes: a19f93cfafdf ("libbpf: Add internal helper to load BTF data by FD")
Signed-off-by: Yinjun Zhang <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/map.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c
index 407071d54ab1..72ef9ddae260 100644
--- a/tools/bpf/bpftool/map.c
+++ b/tools/bpf/bpftool/map.c
@@ -1042,11 +1042,9 @@ static void print_key_value(struct bpf_map_info *info, void *key,
json_writer_t *btf_wtr;
struct btf *btf;
- btf = btf__load_from_kernel_by_id(info->btf_id);
- if (libbpf_get_error(btf)) {
- p_err("failed to get btf");
+ btf = get_map_kv_btf(info);
+ if (libbpf_get_error(btf))
return;
- }
if (json_output) {
print_entry_json(info, key, value, btf);
--
2.34.1
From: Xiaolong Huang <[email protected]>
[ Upstream commit ecd1735f14d6ac868ae5d8b7a2bf193fa11f388b ]
The vm_param and cpu_regs need to be freed via kfree()
before return -EINVAL error.
Fixes: 9c5137aedd11 ("virt: acrn: Introduce VM management interfaces")
Fixes: 2ad2aaee1bc9 ("virt: acrn: Introduce an ioctl to set vCPU registers state")
Signed-off-by: Xiaolong Huang <[email protected]>
Signed-off-by: Fei Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/virt/acrn/hsm.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/virt/acrn/hsm.c b/drivers/virt/acrn/hsm.c
index 130e12b8652a..af889cee6680 100644
--- a/drivers/virt/acrn/hsm.c
+++ b/drivers/virt/acrn/hsm.c
@@ -134,8 +134,10 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
if (IS_ERR(vm_param))
return PTR_ERR(vm_param);
- if ((vm_param->reserved0 | vm_param->reserved1) != 0)
+ if ((vm_param->reserved0 | vm_param->reserved1) != 0) {
+ kfree(vm_param);
return -EINVAL;
+ }
vm = acrn_vm_create(vm, vm_param);
if (!vm) {
@@ -180,21 +182,29 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
return PTR_ERR(cpu_regs);
for (i = 0; i < ARRAY_SIZE(cpu_regs->reserved); i++)
- if (cpu_regs->reserved[i])
+ if (cpu_regs->reserved[i]) {
+ kfree(cpu_regs);
return -EINVAL;
+ }
for (i = 0; i < ARRAY_SIZE(cpu_regs->vcpu_regs.reserved_32); i++)
- if (cpu_regs->vcpu_regs.reserved_32[i])
+ if (cpu_regs->vcpu_regs.reserved_32[i]) {
+ kfree(cpu_regs);
return -EINVAL;
+ }
for (i = 0; i < ARRAY_SIZE(cpu_regs->vcpu_regs.reserved_64); i++)
- if (cpu_regs->vcpu_regs.reserved_64[i])
+ if (cpu_regs->vcpu_regs.reserved_64[i]) {
+ kfree(cpu_regs);
return -EINVAL;
+ }
for (i = 0; i < ARRAY_SIZE(cpu_regs->vcpu_regs.gdt.reserved); i++)
if (cpu_regs->vcpu_regs.gdt.reserved[i] |
- cpu_regs->vcpu_regs.idt.reserved[i])
+ cpu_regs->vcpu_regs.idt.reserved[i]) {
+ kfree(cpu_regs);
return -EINVAL;
+ }
ret = hcall_set_vcpu_regs(vm->vmid, virt_to_phys(cpu_regs));
if (ret < 0)
--
2.34.1
From: Konrad Dybcio <[email protected]>
[ Upstream commit 71021db1c532c2545ae53b9ee85b37b7154f51d4 ]
The gpll4 postdiv is actually a div4, so make sure that Linux is aware of
this.
This fixes the following error messages:
mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller")
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Petr Vorel <[email protected]>
Reviewed-by: Petr Vorel <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gcc-msm8994.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
index 144d2ba7a9be..463a444c8a7e 100644
--- a/drivers/clk/qcom/gcc-msm8994.c
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -108,6 +108,7 @@ static struct clk_alpha_pll gpll4_early = {
static struct clk_alpha_pll_postdiv gpll4 = {
.offset = 0x1dc0,
+ .width = 4,
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
.clkr.hw.init = &(struct clk_init_data)
{
--
2.34.1
From: Rotem Saado <[email protected]>
[ Upstream commit ce014c9861544bb4e789323d0d8956a5ad262e25 ]
Due to preg protection we cannot write to this register
while FW is running (when FW in Halt it is ok).
since we have some cases that we need to dump this
region while FW is running remove this writing from DRV.
FW will do this writing.
Signed-off-by: Rotem Saado <[email protected]>
Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.209f3078bc74.I463530bd2f40daedb39f6d9df987bb7cee209033@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 2 --
drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 2 --
2 files changed, 4 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index 6dcafd0a3d4b..b00cf92c8965 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -1532,8 +1532,6 @@ iwl_dump_ini_dbgi_sram_iter(struct iwl_fw_runtime *fwrt,
return -EBUSY;
range->range_data_size = reg->dev_addr.size;
- iwl_write_prph_no_grab(fwrt->trans, DBGI_SRAM_TARGET_ACCESS_CFG,
- DBGI_SRAM_TARGET_ACCESS_CFG_RESET_ADDRESS_MSK);
for (i = 0; i < (le32_to_cpu(reg->dev_addr.size) / 4); i++) {
prph_data = iwl_read_prph(fwrt->trans, (i % 2) ?
DBGI_SRAM_TARGET_ACCESS_RDATA_MSB :
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
index d0a7d58336a9..6c4f1c949541 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
@@ -350,8 +350,6 @@
#define WFPM_GP2 0xA030B4
/* DBGI SRAM Register details */
-#define DBGI_SRAM_TARGET_ACCESS_CFG 0x00A2E14C
-#define DBGI_SRAM_TARGET_ACCESS_CFG_RESET_ADDRESS_MSK 0x10000
#define DBGI_SRAM_TARGET_ACCESS_RDATA_LSB 0x00A2E154
#define DBGI_SRAM_TARGET_ACCESS_RDATA_MSB 0x00A2E158
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit 5a3156932da06f09953764de113419f254086faf ]
ice_send_event_to_aux() eventually descends to mutex_lock()
(-> might_sched()), so it must not be called under non-task
context. However, at least two fixes have happened already for the
bug splats occurred due to this function being called from atomic
context.
To make the emergency landings softer, bail out early when executed
in non-task context emitting a warn splat only once. This way we
trade some events being potentially lost for system stability and
avoid any related hangs and crashes.
Fixes: 348048e724a0e ("ice: Implement iidc operations")
Signed-off-by: Alexander Lobakin <[email protected]>
Tested-by: Michal Kubiak <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Acked-by: Tony Nguyen <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_idc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_idc.c b/drivers/net/ethernet/intel/ice/ice_idc.c
index adcc9a251595..a2714988dd96 100644
--- a/drivers/net/ethernet/intel/ice/ice_idc.c
+++ b/drivers/net/ethernet/intel/ice/ice_idc.c
@@ -34,6 +34,9 @@ void ice_send_event_to_aux(struct ice_pf *pf, struct iidc_event *event)
{
struct iidc_auxiliary_drv *iadrv;
+ if (WARN_ON_ONCE(!in_task()))
+ return;
+
if (!pf->adev)
return;
--
2.34.1
From: Vitaly Kuznetsov <[email protected]>
commit 7ec37d1cbe17d8189d9562178d8b29167fe1c31a upstream.
When KVM_CAP_HYPERV_SYNIC{,2} is activated, KVM already checks for
irqchip_in_kernel() so normally SynIC irqs should never be set. It is,
however, possible for a misbehaving VMM to write to SYNIC/STIMER MSRs
causing erroneous behavior.
The immediate issue being fixed is that kvm_irq_delivery_to_apic()
(kvm_irq_delivery_to_apic_fast()) crashes when called with
'irq.shorthand = APIC_DEST_SELF' and 'src == NULL'.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/hyperv.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -446,6 +446,9 @@ static int synic_set_irq(struct kvm_vcpu
struct kvm_lapic_irq irq;
int ret, vector;
+ if (KVM_BUG_ON(!lapic_in_kernel(vcpu), vcpu->kvm))
+ return -EINVAL;
+
if (sint >= ARRAY_SIZE(synic->sint))
return -EINVAL;
From: Yong Wu <[email protected]>
commit ddc3a324889686ec9b358de20fdeec0d2668c7a8 upstream.
Mute the warning from "make dtbs_check":
larb@14016000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@15001000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@16010000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
As the description of mediatek,larb-id, the property is only
required when the larbid is not consecutive from its IOMMU point of view.
Also, from the description of mediatek,larbs in
Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml, all the larbs
must sort by the larb index.
In mt8167, there is only one IOMMU HW and three larbs. The drivers already
know its larb index from the mediatek,larbs property of IOMMU, thus no
need this property.
Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <[email protected]>
Acked-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml | 1 -
1 file changed, 1 deletion(-)
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -106,7 +106,6 @@ allOf:
- mediatek,mt2701-smi-larb
- mediatek,mt2712-smi-larb
- mediatek,mt6779-smi-larb
- - mediatek,mt8167-smi-larb
- mediatek,mt8192-smi-larb
then:
From: Yong Wu <[email protected]>
[ Upstream commit 635319a4a7444ca97124d781cd96deb277ff4d40 ]
MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.
M4U
|
smi-common
|
-------------
| | ...
| |
larb1 larb2
| |
vdec venc
When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.
Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.
This patch adds device_link between the consumer and the larbs.
When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.
2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.
Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.
Meanwhile, Currently we don't have a device connect with 2 larbs at the
same time. Disallow this case, print the error log.
[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/
Suggested-by: Tomasz Figa <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Tested-by: Frank Wunderlich <[email protected]> # BPI-R2/MT7623
Acked-by: Joerg Roedel <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/mtk_iommu.c | 30 ++++++++++++++++++++++++++++++
drivers/iommu/mtk_iommu_v1.c | 29 ++++++++++++++++++++++++++++-
2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 77ae20ff9b35..5971a1168666 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -562,22 +562,52 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct mtk_iommu_data *data;
+ struct device_link *link;
+ struct device *larbdev;
+ unsigned int larbid, larbidx, i;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return ERR_PTR(-ENODEV); /* Not a iommu client device */
data = dev_iommu_priv_get(dev);
+ /*
+ * Link the consumer device with the smi-larb device(supplier).
+ * The device that connects with each a larb is a independent HW.
+ * All the ports in each a device should be in the same larbs.
+ */
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ for (i = 1; i < fwspec->num_ids; i++) {
+ larbidx = MTK_M4U_TO_LARB(fwspec->ids[i]);
+ if (larbid != larbidx) {
+ dev_err(dev, "Can only use one larb. Fail@larb%d-%d.\n",
+ larbid, larbidx);
+ return ERR_PTR(-EINVAL);
+ }
+ }
+ larbdev = data->larb_imu[larbid].dev;
+ link = device_link_add(dev, larbdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link)
+ dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
return &data->iommu;
}
static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct mtk_iommu_data *data;
+ struct device *larbdev;
+ unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;
+ data = dev_iommu_priv_get(dev);
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ device_link_remove(dev, larbdev);
+
iommu_fwspec_free(dev);
}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 68bf02f87cfd..bc7ee90b9373 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct of_phandle_args iommu_spec;
struct mtk_iommu_data *data;
- int err, idx = 0;
+ int err, idx = 0, larbid, larbidx;
+ struct device_link *link;
+ struct device *larbdev;
/*
* In the deferred case, free the existed fwspec.
@@ -453,6 +455,23 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
data = dev_iommu_priv_get(dev);
+ /* Link the consumer device with the smi-larb device(supplier) */
+ larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+ for (idx = 1; idx < fwspec->num_ids; idx++) {
+ larbidx = mt2701_m4u_to_larb(fwspec->ids[idx]);
+ if (larbid != larbidx) {
+ dev_err(dev, "Can only use one larb. Fail@larb%d-%d.\n",
+ larbid, larbidx);
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ larbdev = data->larb_imu[larbid].dev;
+ link = device_link_add(dev, larbdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link)
+ dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
return &data->iommu;
}
@@ -473,10 +492,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct mtk_iommu_data *data;
+ struct device *larbdev;
+ unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;
+ data = dev_iommu_priv_get(dev);
+ larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ device_link_remove(dev, larbdev);
+
iommu_fwspec_free(dev);
}
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit fc8e2c707ce11c8ec2e992885b0d53a5e04031ac ]
Check sta_rates pointer value in mt7603_sta_rate_tbl_update routine
since minstrel_ht_update_rates can fail allocating rates array.
Fixes: c8846e1015022 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7603/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/main.c b/drivers/net/wireless/mediatek/mt76/mt7603/main.c
index 8edea1e7a602..7f52a4a11cea 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/main.c
@@ -620,6 +620,9 @@ mt7603_sta_rate_tbl_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta_rates *sta_rates = rcu_dereference(sta->rates);
int i;
+ if (!sta_rates)
+ return;
+
spin_lock_bh(&dev->mt76.lock);
for (i = 0; i < ARRAY_SIZE(msta->rates); i++) {
msta->rates[i].idx = sta_rates->rate[i].idx;
--
2.34.1
From: Dario Binacchi <[email protected]>
[ Upstream commit 2970bf5a32f079e1e9197411db4fe9faccb1503a ]
Set the controller registers according to the real clock rate. The
controller registers configuration (setup, hold, timeout, ... cycles)
depends on the clock rate of the GPMI. Using the real rate instead of
the ideal one, avoids that this inaccuracy (required_rate - real_rate)
affects the registers setting.
This patch has been tested on two custom boards with i.MX28 and i.MX6
SOCs:
- i.MX28:
required rate 100MHz, real rate 99.3MHz
- i.MX6
required rate 100MHz, real rate 99MHz
Fixes: b1206122069a ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
Co-developed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
Tested-by: Sascha Hauer <[email protected]>
Reviewed-by: Sascha Hauer <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 668d69fe4cf2..b72b387c08ef 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -648,6 +648,7 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this,
const struct nand_sdr_timings *sdr)
{
struct gpmi_nfc_hardware_timing *hw = &this->hw;
+ struct resources *r = &this->resources;
unsigned int dll_threshold_ps = this->devdata->max_chain_delay;
unsigned int period_ps, reference_period_ps;
unsigned int data_setup_cycles, data_hold_cycles, addr_setup_cycles;
@@ -671,6 +672,8 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this,
wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY;
}
+ hw->clk_rate = clk_round_rate(r->clock[0], hw->clk_rate);
+
/* SDR core timings are given in picoseconds */
period_ps = div_u64((u64)NSEC_PER_SEC * 1000, hw->clk_rate);
--
2.34.1
From: Tom Rix <[email protected]>
[ Upstream commit 4a92fc6e55da5b87cecb572275deaff6ac9dd27e ]
Calling hdmi_infoframe_unpack() with static sizeof(buffer) skips all
the size checking done later in hdmi_infoframe_unpack(). A better
value is the amount of data read into buffer.
Fixes: 480b8b3e42c3 ("video/hdmi: Pass buffer size to infoframe unpack functions")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/adv7511-v4l2.c | 2 +-
drivers/media/i2c/adv7604.c | 2 +-
drivers/media/i2c/adv7842.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/adv7511-v4l2.c b/drivers/media/i2c/adv7511-v4l2.c
index 41f4e749a859..2217004264e4 100644
--- a/drivers/media/i2c/adv7511-v4l2.c
+++ b/drivers/media/i2c/adv7511-v4l2.c
@@ -544,7 +544,7 @@ static void log_infoframe(struct v4l2_subdev *sd, const struct adv7511_cfg_read_
buffer[3] = 0;
buffer[3] = hdmi_infoframe_checksum(buffer, len + 4);
- if (hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer)) < 0) {
+ if (hdmi_infoframe_unpack(&frame, buffer, len + 4) < 0) {
v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, cri->desc);
return;
}
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 122e1fdccd96..d688ffff7a07 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2484,7 +2484,7 @@ static int adv76xx_read_infoframe(struct v4l2_subdev *sd, int index,
buffer[i + 3] = infoframe_read(sd,
adv76xx_cri[index].payload_addr + i);
- if (hdmi_infoframe_unpack(frame, buffer, sizeof(buffer)) < 0) {
+ if (hdmi_infoframe_unpack(frame, buffer, len + 3) < 0) {
v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__,
adv76xx_cri[index].desc);
return -ENOENT;
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index 7f8acbdf0db4..8ab4c63839b4 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -2593,7 +2593,7 @@ static void log_infoframe(struct v4l2_subdev *sd, const struct adv7842_cfg_read_
for (i = 0; i < len; i++)
buffer[i + 3] = infoframe_read(sd, cri->payload_addr + i);
- if (hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer)) < 0) {
+ if (hdmi_infoframe_unpack(&frame, buffer, len + 3) < 0) {
v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, cri->desc);
return;
}
--
2.34.1
From: Taniya Das <[email protected]>
[ Upstream commit b527358cb4cd58a8279c9062b0786f1fab628fdc ]
Support the new numerator and denominator for pixel clock on SM8350 and
support rgb101010, RGB888 use cases on SM8450.
Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/clk-rcg2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index b831975a9606..f675fd969c4d 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -729,6 +729,7 @@ static const struct frac_entry frac_table_pixel[] = {
{ 2, 9 },
{ 4, 9 },
{ 1, 1 },
+ { 2, 3 },
{ }
};
--
2.34.1
From: Eric W. Biederman <[email protected]>
commit 49c1866348f364478a0c4d3dd13fd08bb82d3a5b upstream.
The condition is impossible and to the best of my knowledge has never
triggered.
We are in deep trouble if that conditions happens and we walk past
the end of our allocated array.
So delete the WARN_ON and the code that makes it look like the kernel
can handle the case of walking past the end of it's vma_meta array.
Reviewed-by: Jann Horn <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/coredump.c | 6 ------
1 file changed, 6 deletions(-)
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -1151,12 +1151,6 @@ static bool dump_vma_snapshot(struct cor
mmap_write_unlock(mm);
- if (WARN_ON(i != cprm->vma_count)) {
- kvfree(cprm->vma_meta);
- return false;
- }
-
-
for (i = 0; i < cprm->vma_count; i++) {
struct core_vma_metadata *m = cprm->vma_meta + i;
From: Miaoqian Lin <[email protected]>
[ Upstream commit a6b44a2518a08348bd0f0401e4d2b99233bbabc2 ]
Fix the missing clk_disable_unprepare() before return
from rk817_platform_probe() in the error handling case.
Fixes: 0d6a04da9b25 ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Miaoqian Lin <[email protected]>
Tested-by: Chris Morgan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rk817_codec.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rk817_codec.c b/sound/soc/codecs/rk817_codec.c
index 03f24edfe4f6..8fffe378618d 100644
--- a/sound/soc/codecs/rk817_codec.c
+++ b/sound/soc/codecs/rk817_codec.c
@@ -508,12 +508,14 @@ static int rk817_platform_probe(struct platform_device *pdev)
if (ret < 0) {
dev_err(&pdev->dev, "%s() register codec error %d\n",
__func__, ret);
- goto err_;
+ goto err_clk;
}
return 0;
-err_:
+err_clk:
+ clk_disable_unprepare(rk817_codec_data->mclk);
+err_:
return ret;
}
--
2.34.1
From: Quinn Tran <[email protected]>
commit e35920ab7874d5e2faeb4f958a74bfa793f1ce5a upstream.
After a recoverable PCI error has been detected and recovered, qla driver
needs to check to see if the error condition still persist and/or wait
for the OS to give the resume signal.
Sep 8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440
qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx]
Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60
[qla2xxx]
Sep 8 22:26:03 localhost kernel: Call Trace:
Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160
[qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120
[qla2xxx]
Sep 8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80
Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80
Sep 8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90
Sep 8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0
Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240
Sep 8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0
Sep 8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360
..
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI
disconnect.
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22:
qla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to
capture FW dump
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0,
waited 5221 msecs
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio
enabled returning.
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX
Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5
mb[0-3]=[0xffff 0xffff 0xffff 0xffff]
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_os.c | 10 +++++++++-
drivers/scsi/qla2xxx/qla_tmpl.c | 9 +++++++--
2 files changed, 16 insertions(+), 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -7641,7 +7641,7 @@ qla2xxx_pci_error_detected(struct pci_de
switch (state) {
case pci_channel_io_normal:
- ha->flags.eeh_busy = 0;
+ qla_pci_set_eeh_busy(vha);
if (ql2xmqsupport || ql2xnvmeenable) {
set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
@@ -7682,9 +7682,16 @@ qla2xxx_pci_mmio_enabled(struct pci_dev
"mmio enabled\n");
ha->pci_error_state = QLA_PCI_MMIO_ENABLED;
+
if (IS_QLA82XX(ha))
return PCI_ERS_RESULT_RECOVERED;
+ if (qla2x00_isp_reg_stat(ha)) {
+ ql_log(ql_log_info, base_vha, 0x803f,
+ "During mmio enabled, PCI/Register disconnect still detected.\n");
+ goto out;
+ }
+
spin_lock_irqsave(&ha->hardware_lock, flags);
if (IS_QLA2100(ha) || IS_QLA2200(ha)){
stat = rd_reg_word(®->hccr);
@@ -7706,6 +7713,7 @@ qla2xxx_pci_mmio_enabled(struct pci_dev
"RISC paused -- mmio_enabled, Dumping firmware.\n");
qla2xxx_dump_fw(base_vha);
}
+out:
/* set PCI_ERS_RESULT_NEED_RESET to trigger call to qla2xxx_pci_slot_reset */
ql_dbg(ql_dbg_aer, base_vha, 0x600d,
"mmio enabled returning.\n");
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -435,8 +435,13 @@ qla27xx_fwdt_entry_t266(struct scsi_qla_
{
ql_dbg(ql_dbg_misc, vha, 0xd20a,
"%s: reset risc [%lx]\n", __func__, *len);
- if (buf)
- WARN_ON_ONCE(qla24xx_soft_reset(vha->hw) != QLA_SUCCESS);
+ if (buf) {
+ if (qla24xx_soft_reset(vha->hw) != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_async, vha, 0x5001,
+ "%s: unable to soft reset\n", __func__);
+ return INVALID_ENTRY;
+ }
+ }
return qla27xx_next_entry(ent);
}
From: Jackie Liu <[email protected]>
commit b2479de38d8fc7ef13d5c78ff5ded6e5a1a4eac0 upstream.
My kernel robot report below:
drivers/block/n64cart.c: In function ‘n64cart_submit_bio’:
drivers/block/n64cart.c:91:26: error: ‘struct bio’ has no member named ‘bi_disk’
91 | struct device *dev = bio->bi_disk->private_data;
| ^~
CC drivers/slimbus/qcom-ctrl.o
CC drivers/auxdisplay/hd44780.o
CC drivers/watchdog/watchdog_core.o
CC drivers/nvme/host/fault_inject.o
AR drivers/accessibility/braille/built-in.a
make[2]: *** [scripts/Makefile.build:288: drivers/block/n64cart.o] Error 1
Fixes: 309dca309fc3 ("block: store a block_device pointer in struct bio");
Reported-by: k2ci <[email protected]>
Signed-off-by: Jackie Liu <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/n64cart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/block/n64cart.c
+++ b/drivers/block/n64cart.c
@@ -88,7 +88,7 @@ static blk_qc_t n64cart_submit_bio(struc
{
struct bio_vec bvec;
struct bvec_iter iter;
- struct device *dev = bio->bi_disk->private_data;
+ struct device *dev = bio->bi_bdev->bd_disk->private_data;
u32 pos = bio->bi_iter.bi_sector << SECTOR_SHIFT;
bio_for_each_segment(bvec, bio, iter) {
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 9c27896ac1bb83ea5c461ce6f7089d02102a2b21 ]
As the potential failure of the pci_enable_device(),
it should be better to check the return value and return
error if fails.
Fixes: 70b2f993ea4a ("habanalabs: create common folder")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/habanalabs/common/debugfs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/misc/habanalabs/common/debugfs.c b/drivers/misc/habanalabs/common/debugfs.c
index 985f1f3dbd20..0b46fd22c411 100644
--- a/drivers/misc/habanalabs/common/debugfs.c
+++ b/drivers/misc/habanalabs/common/debugfs.c
@@ -856,6 +856,8 @@ static ssize_t hl_set_power_state(struct file *f, const char __user *buf,
pci_set_power_state(hdev->pdev, PCI_D0);
pci_restore_state(hdev->pdev);
rc = pci_enable_device(hdev->pdev);
+ if (rc < 0)
+ return rc;
} else if (value == 2) {
pci_save_state(hdev->pdev);
pci_disable_device(hdev->pdev);
--
2.34.1
From: Robert Hancock <[email protected]>
[ Upstream commit abaca3179b41d4b3b115f27814ee36f6fb45e897 ]
If the pps-gpio driver was probed prior to the GPIO device it uses, the
devm_gpiod_get call returned an -EPROBE_DEFER error, but pps_gpio_probe
replaced that error code with -EINVAL, causing the pps-gpio probe to
fail and not be retried later. Propagate the error return value so that
deferred probe works properly.
Fixes: 161520451dfa (pps: new client driver using GPIO)
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Rodolfo Giometti <[email protected]>
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: Rodolfo Giometti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pps/clients/pps-gpio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
index 35799e6401c9..2f4b11b4dfcd 100644
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -169,7 +169,7 @@ static int pps_gpio_probe(struct platform_device *pdev)
/* GPIO setup */
ret = pps_gpio_setup(dev);
if (ret)
- return -EINVAL;
+ return ret;
/* IRQ setup */
ret = gpiod_to_irq(data->gpio_pin);
--
2.34.1
From: Yahu Gao <[email protected]>
[ Upstream commit bcd2be763252f3a4d5fc4d6008d4d96c601ee74b ]
The return value is ioprio * BFQ_WEIGHT_CONVERSION_COEFF or 0.
What we want is ioprio or 0.
Correct this by changing the calculation.
Signed-off-by: Yahu Gao <[email protected]>
Acked-by: Paolo Valente <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-wf2q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/bfq-wf2q.c b/block/bfq-wf2q.c
index b74cc0da118e..709b901de3ca 100644
--- a/block/bfq-wf2q.c
+++ b/block/bfq-wf2q.c
@@ -519,7 +519,7 @@ unsigned short bfq_ioprio_to_weight(int ioprio)
static unsigned short bfq_weight_to_ioprio(int weight)
{
return max_t(int, 0,
- IOPRIO_NR_LEVELS * BFQ_WEIGHT_CONVERSION_COEFF - weight);
+ IOPRIO_NR_LEVELS - weight / BFQ_WEIGHT_CONVERSION_COEFF);
}
static void bfq_get_entity(struct bfq_entity *entity)
--
2.34.1
From: Vladimir Oltean <[email protected]>
[ Upstream commit feb13dcb1818b775fbd9191f797be67cd605f03e ]
Let user space properly determine that the enetc driver provides
software timestamps.
Fixes: 4caefbce06d1 ("enetc: add software timestamping")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Claudiu Manoil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/enetc/enetc_ethtool.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
index 910b9f722504..d62c188c8748 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
@@ -672,7 +672,10 @@ static int enetc_get_ts_info(struct net_device *ndev,
#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
- SOF_TIMESTAMPING_RAW_HARDWARE;
+ SOF_TIMESTAMPING_RAW_HARDWARE |
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE;
info->tx_types = (1 << HWTSTAMP_TX_OFF) |
(1 << HWTSTAMP_TX_ON) |
--
2.34.1
From: Jernej Skrabec <[email protected]>
[ Upstream commit fecd363ae2d5042553370b0adf60c47e35c34a83 ]
According to BSP library source, H264 neighbour info buffer size needs
to be 32 kiB for H6. This is similar to H265 decoding, which also needs
double buffer size in comparison to older Cedrus core generations.
Increase buffer size to cover H6 needs. Since increase is not that big
in absolute numbers, it doesn't make sense to complicate logic for older
generations.
Issue was discovered using iommu and cross checked with BSP library
source.
Fixes: 6eb9b758e307 ("media: cedrus: Add H264 decoding support")
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index de7442d4834d..d3e26bfe6c90 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -38,7 +38,7 @@ struct cedrus_h264_sram_ref_pic {
#define CEDRUS_H264_FRAME_NUM 18
-#define CEDRUS_NEIGHBOR_INFO_BUF_SIZE (16 * SZ_1K)
+#define CEDRUS_NEIGHBOR_INFO_BUF_SIZE (32 * SZ_1K)
#define CEDRUS_MIN_PIC_INFO_BUF_SIZE (130 * SZ_1K)
static void cedrus_h264_write_sram(struct cedrus_dev *dev,
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit e477e51a41cb5d6034f3c5ea85a71ad4613996b9 ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
mc13xxx_irq_request() and return error if fails.
Fixes: 8e00593557c3 ("mfd: Add mc13892 support to mc13xxx")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/mc13xxx-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 1abe7432aad8..e281a9202f11 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -323,8 +323,10 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
adc1 |= MC13783_ADC1_ATOX;
dev_dbg(mc13xxx->dev, "%s: request irq\n", __func__);
- mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
+ ret = mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
mc13xxx_handler_adcdone, __func__, &adcdone_data);
+ if (ret)
+ goto out;
mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0);
mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1);
--
2.34.1
From: Anand Jain <[email protected]>
[ Upstream commit 770c79fb65506fc7c16459855c3839429f46cb32 ]
Identifying and removing the stale device from the fs_uuids list is done
by btrfs_free_stale_devices(). btrfs_free_stale_devices() in turn
depends on device_path_matched() to check if the device appears in more
than one btrfs_device structure.
The matching of the device happens by its path, the device path. However,
when device mapper is in use, the dm device paths are nothing but a link
to the actual block device, which leads to the device_path_matched()
failing to match.
Fix this by matching the dev_t as provided by lookup_bdev() instead of
plain string compare of the device paths.
Reported-by: Josef Bacik <[email protected]>
Signed-off-by: Anand Jain <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/volumes.c | 45 ++++++++++++++++++++++++++++++++++++++-------
1 file changed, 38 insertions(+), 7 deletions(-)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 06a1a7c2254c..33bd94ee4690 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -530,15 +530,48 @@ btrfs_get_bdev_and_sb(const char *device_path, fmode_t flags, void *holder,
return ret;
}
-static bool device_path_matched(const char *path, struct btrfs_device *device)
+/*
+ * Check if the device in the path matches the device in the given struct device.
+ *
+ * Returns:
+ * true If it is the same device.
+ * false If it is not the same device or on error.
+ */
+static bool device_matched(const struct btrfs_device *device, const char *path)
{
- int found;
+ char *device_name;
+ dev_t dev_old;
+ dev_t dev_new;
+ int ret;
+
+ /*
+ * If we are looking for a device with the matching dev_t, then skip
+ * device without a name (a missing device).
+ */
+ if (!device->name)
+ return false;
+
+ device_name = kzalloc(BTRFS_PATH_NAME_MAX, GFP_KERNEL);
+ if (!device_name)
+ return false;
rcu_read_lock();
- found = strcmp(rcu_str_deref(device->name), path);
+ scnprintf(device_name, BTRFS_PATH_NAME_MAX, "%s", rcu_str_deref(device->name));
rcu_read_unlock();
- return found == 0;
+ ret = lookup_bdev(device_name, &dev_old);
+ kfree(device_name);
+ if (ret)
+ return false;
+
+ ret = lookup_bdev(path, &dev_new);
+ if (ret)
+ return false;
+
+ if (dev_old == dev_new)
+ return true;
+
+ return false;
}
/*
@@ -571,9 +604,7 @@ static int btrfs_free_stale_devices(const char *path,
&fs_devices->devices, dev_list) {
if (skip_device && skip_device == device)
continue;
- if (path && !device->name)
- continue;
- if (path && !device_path_matched(path, device))
+ if (path && !device_matched(device, path))
continue;
if (fs_devices->opened) {
/* for an already deleted device return 0 */
--
2.34.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]
Make sure in .probe() to set driver data before the function is left to
make it possible in .remove() to undo the actions done.
This fixes a potential memory leak and stops returning an error code in
.remove() that is ignored by the driver core anyhow.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-mmp/sram.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 6794e2db1ad5..ecc46c31004f 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
if (!info)
return -ENOMEM;
+ platform_set_drvdata(pdev, info);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
list_add(&info->node, &sram_bank_list);
mutex_unlock(&sram_lock);
- platform_set_drvdata(pdev, info);
-
dev_info(&pdev->dev, "initialized\n");
return 0;
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
struct sram_bank_info *info;
info = platform_get_drvdata(pdev);
- if (info == NULL)
- return -ENODEV;
- mutex_lock(&sram_lock);
- list_del(&info->node);
- mutex_unlock(&sram_lock);
+ if (info->sram_size) {
+ mutex_lock(&sram_lock);
+ list_del(&info->node);
+ mutex_unlock(&sram_lock);
+
+ gen_pool_destroy(info->gpool);
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+ }
- gen_pool_destroy(info->gpool);
- iounmap(info->sram_virt);
- kfree(info->pool_name);
kfree(info);
+
return 0;
}
--
2.34.1
From: Ulf Hansson <[email protected]>
[ Upstream commit d6c9219ca1139b74541b2a98cee47a3426d754a9 ]
Even if the current WARN() notifies the user that something is severely
wrong, we can still end up in a PANIC() when trying to invoke the missing
->enable_sdio_irq() ops. Therefore, let's also return an error code and
prevent the host from being added.
While at it, move the code into a separate function to prepare for
subsequent changes and for further host caps validations.
Signed-off-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/core/host.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index cf140f4ec864..d739e2b631fe 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -588,6 +588,16 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
EXPORT_SYMBOL(mmc_alloc_host);
+static int mmc_validate_host_caps(struct mmc_host *host)
+{
+ if (host->caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) {
+ dev_warn(host->parent, "missing ->enable_sdio_irq() ops\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/**
* mmc_add_host - initialise host hardware
* @host: mmc host
@@ -600,8 +610,9 @@ int mmc_add_host(struct mmc_host *host)
{
int err;
- WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
- !host->ops->enable_sdio_irq);
+ err = mmc_validate_host_caps(host);
+ if (err)
+ return err;
err = device_add(&host->class_dev);
if (err)
--
2.34.1
From: Xin Xiong <[email protected]>
[ Upstream commit fecbd4a317c95d73c849648c406bcf1b6a0ec1cf ]
The reference counting issue happens in several error handling paths
on a refcounted object "nc->dmac". In these paths, the function simply
returns the error code, forgetting to balance the reference count of
"nc->dmac", increased earlier by dma_request_channel(), which may
cause refcount leaks.
Fix it by decrementing the refcount of specific object in those error
paths.
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Co-developed-by: Xiyu Yang <[email protected]>
Signed-off-by: Xiyu Yang <[email protected]>
Co-developed-by: Xin Tan <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Xin Xiong <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index f3276ee9e4fe..ddd93bc38ea6 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -2060,13 +2060,15 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
nc->mck = of_clk_get(dev->parent->of_node, 0);
if (IS_ERR(nc->mck)) {
dev_err(dev, "Failed to retrieve MCK clk\n");
- return PTR_ERR(nc->mck);
+ ret = PTR_ERR(nc->mck);
+ goto out_release_dma;
}
np = of_parse_phandle(dev->parent->of_node, "atmel,smc", 0);
if (!np) {
dev_err(dev, "Missing or invalid atmel,smc property\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out_release_dma;
}
nc->smc = syscon_node_to_regmap(np);
@@ -2074,10 +2076,16 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
if (IS_ERR(nc->smc)) {
ret = PTR_ERR(nc->smc);
dev_err(dev, "Could not get SMC regmap (err = %d)\n", ret);
- return ret;
+ goto out_release_dma;
}
return 0;
+
+out_release_dma:
+ if (nc->dmac)
+ dma_release_channel(nc->dmac);
+
+ return ret;
}
static int
--
2.34.1
From: Bart Van Assche <[email protected]>
[ Upstream commit 3032ed77a28913203a4fe0ab8f05752331af79b3 ]
Report both the command flags and command state instead of only the
command state.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4d7007b49d52 ("[SCSI] fnic: Fnic Trace Utility")
Cc: Hiral Patel <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/fnic/fnic_scsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index f8afbfb468dc..d084a7db3925 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -604,7 +604,7 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
tag, sc, io_req, sg_count, cmd_trace,
- (((u64)CMD_FLAGS(sc) >> 32) | CMD_STATE(sc)));
+ (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
/* if only we issued IO, will we have the io lock */
if (io_lock_acquired)
--
2.34.1
From: Jeremy Linton <[email protected]>
[ Upstream commit 8d3ea3d402db94b61075617e71b67459a714a502 ]
GCC12 appears to be much smarter about its dependency tracking and is
aware that the relaxed variants are just normal loads and stores and
this is causing problems like:
[ 210.074549] ------------[ cut here ]------------
[ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out
[ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240
[ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat]
[ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110
[ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58
[ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters
[ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022
[ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 210.161358] pc : dev_watchdog+0x234/0x240
[ 210.161364] lr : dev_watchdog+0x234/0x240
[ 210.161368] sp : ffff8000080a3a40
[ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20
[ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08
[ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000
[ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff
[ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a
[ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0
[ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c
[ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000
[ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000
[ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044
[ 210.269682] Call trace:
[ 210.272133] dev_watchdog+0x234/0x240
[ 210.275811] call_timer_fn+0x3c/0x15c
[ 210.279489] __run_timers.part.0+0x288/0x310
[ 210.283777] run_timer_softirq+0x48/0x80
[ 210.287716] __do_softirq+0x128/0x360
[ 210.291392] __irq_exit_rcu+0x138/0x140
[ 210.295243] irq_exit_rcu+0x1c/0x30
[ 210.298745] el1_interrupt+0x38/0x54
[ 210.302334] el1h_64_irq_handler+0x18/0x24
[ 210.306445] el1h_64_irq+0x7c/0x80
[ 210.309857] arch_cpu_idle+0x18/0x2c
[ 210.313445] default_idle_call+0x4c/0x140
[ 210.317470] cpuidle_idle_call+0x14c/0x1a0
[ 210.321584] do_idle+0xb0/0x100
[ 210.324737] cpu_startup_entry+0x30/0x8c
[ 210.328675] secondary_start_kernel+0xe4/0x110
[ 210.333138] __secondary_switched+0x94/0x98
The assumption when these were relaxed seems to be that device memory
would be mapped non reordering, and that other constructs
(spinlocks/etc) would provide the barriers to assure that packet data
and in memory rings/queues were ordered with respect to device
register reads/writes. This itself seems a bit sketchy, but the real
problem with GCC12 is that it is moving the actual reads/writes around
at will as though they were independent operations when in truth they
are not, but the compiler can't know that. When looking at the
assembly dumps for many of these routines its possible to see very
clean, but not strictly in program order operations occurring as the
compiler would be free to do if these weren't actually register
reads/write operations.
Its possible to suppress the timeout with a liberal bit of dma_mb()'s
sprinkled around but the device still seems unable to reliably
send/receive data. A better plan is to use the safer readl/writel
everywhere.
Since this partially reverts an older commit, which notes the use of
the relaxed variants for performance reasons. I would suggest that
any performance problems with this commit are targeted at relaxing only
the performance critical code paths after assuring proper barriers.
Fixes: 69d2ea9c79898 ("net: bcmgenet: Use correct I/O accessors")
Reported-by: Peter Robinson <[email protected]>
Signed-off-by: Jeremy Linton <[email protected]>
Acked-by: Peter Robinson <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index b4f99dd284e5..510e0cf64fa9 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -76,7 +76,7 @@ static inline void bcmgenet_writel(u32 value, void __iomem *offset)
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
__raw_writel(value, offset);
else
- writel_relaxed(value, offset);
+ writel(value, offset);
}
static inline u32 bcmgenet_readl(void __iomem *offset)
@@ -84,7 +84,7 @@ static inline u32 bcmgenet_readl(void __iomem *offset)
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
return __raw_readl(offset);
else
- return readl_relaxed(offset);
+ return readl(offset);
}
static inline void dmadesc_set_length_status(struct bcmgenet_priv *priv,
--
2.34.1
From: Chaitanya Kulkarni <[email protected]>
[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/loop.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 92f9d32bfae5..8cba10aafadb 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -844,33 +844,33 @@ static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf)
static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf)
{
- return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_offset);
+ return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_offset);
}
static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf)
{
- return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
+ return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
}
static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf)
{
int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR);
- return sprintf(buf, "%s\n", autoclear ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", autoclear ? "1" : "0");
}
static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
{
int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN);
- return sprintf(buf, "%s\n", partscan ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", partscan ? "1" : "0");
}
static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf)
{
int dio = (lo->lo_flags & LO_FLAGS_DIRECT_IO);
- return sprintf(buf, "%s\n", dio ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", dio ? "1" : "0");
}
LOOP_ATTR_RO(backing_file);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 4528668ca331f7ce5999b7746657b46db5b3b785 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: 2121aa3e2312 ("mips: cdmm: Add mti,mips-cdmm dtb node support")
Signed-off-by: Miaoqian Lin <[email protected]>
Acked-by: Serge Semin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/mips_cdmm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index 626dedd110cb..fca0d0669aa9 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -351,6 +351,7 @@ phys_addr_t __weak mips_cdmm_phys_base(void)
np = of_find_compatible_node(NULL, NULL, "mti,mips-cdmm");
if (np) {
err = of_address_to_resource(np, 0, &res);
+ of_node_put(np);
if (!err)
return res.start;
}
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 42ce8d3b623162f3248db50a38359f294e6b06fd ]
Fix a possible race in mt7615_pm_power_save_work() if rx/tx napi
schedules ps_work and we are currently accessing device register
on a different cpu.
Fixes: db928f1ab9789 ("mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napi")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index f2704149834a..eb7bda91f2b3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2000,6 +2000,14 @@ void mt7615_pm_power_save_work(struct work_struct *work)
test_bit(MT76_HW_SCHED_SCANNING, &dev->mphy.state))
goto out;
+ if (mutex_is_locked(&dev->mt76.mutex))
+ /* if mt76 mutex is held we should not put the device
+ * to sleep since we are currently accessing device
+ * register map. We need to wait for the next power_save
+ * trigger.
+ */
+ goto out;
+
if (time_is_after_jiffies(dev->pm.last_activity + delta)) {
delta = dev->pm.last_activity + delta - jiffies;
goto out;
--
2.34.1
From: Marc Zyngier <[email protected]>
[ Upstream commit f7e53e2255808ca3abcc8f38d18ad0823425e771 ]
The npcm driver has a bunch of references to the irq_chip parent_device
field, but never sets it.
Fix it by fishing that reference from somewhere else, but it is
obvious that these debug statements were never used. Also remove
an unused field in a local data structure.
Signed-off-by: Marc Zyngier <[email protected]>
Acked-by: Bartosz Golaszewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 25 +++++++++++------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
index 4d81908d6725..ba536fd4d674 100644
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
@@ -78,7 +78,6 @@ struct npcm7xx_gpio {
struct gpio_chip gc;
int irqbase;
int irq;
- void *priv;
struct irq_chip irq_chip;
u32 pinctrl_id;
int (*direction_input)(struct gpio_chip *chip, unsigned offset);
@@ -226,7 +225,7 @@ static void npcmgpio_irq_handler(struct irq_desc *desc)
chained_irq_enter(chip, desc);
sts = ioread32(bank->base + NPCM7XX_GP_N_EVST);
en = ioread32(bank->base + NPCM7XX_GP_N_EVEN);
- dev_dbg(chip->parent_device, "==> got irq sts %.8x %.8x\n", sts,
+ dev_dbg(bank->gc.parent, "==> got irq sts %.8x %.8x\n", sts,
en);
sts &= en;
@@ -241,33 +240,33 @@ static int npcmgpio_set_irq_type(struct irq_data *d, unsigned int type)
gpiochip_get_data(irq_data_get_irq_chip_data(d));
unsigned int gpio = BIT(d->hwirq);
- dev_dbg(d->chip->parent_device, "setirqtype: %u.%u = %u\n", gpio,
+ dev_dbg(bank->gc.parent, "setirqtype: %u.%u = %u\n", gpio,
d->irq, type);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
- dev_dbg(d->chip->parent_device, "edge.rising\n");
+ dev_dbg(bank->gc.parent, "edge.rising\n");
npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
break;
case IRQ_TYPE_EDGE_FALLING:
- dev_dbg(d->chip->parent_device, "edge.falling\n");
+ dev_dbg(bank->gc.parent, "edge.falling\n");
npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
break;
case IRQ_TYPE_EDGE_BOTH:
- dev_dbg(d->chip->parent_device, "edge.both\n");
+ dev_dbg(bank->gc.parent, "edge.both\n");
npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
break;
case IRQ_TYPE_LEVEL_LOW:
- dev_dbg(d->chip->parent_device, "level.low\n");
+ dev_dbg(bank->gc.parent, "level.low\n");
npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
break;
case IRQ_TYPE_LEVEL_HIGH:
- dev_dbg(d->chip->parent_device, "level.high\n");
+ dev_dbg(bank->gc.parent, "level.high\n");
npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
break;
default:
- dev_dbg(d->chip->parent_device, "invalid irq type\n");
+ dev_dbg(bank->gc.parent, "invalid irq type\n");
return -EINVAL;
}
@@ -289,7 +288,7 @@ static void npcmgpio_irq_ack(struct irq_data *d)
gpiochip_get_data(irq_data_get_irq_chip_data(d));
unsigned int gpio = d->hwirq;
- dev_dbg(d->chip->parent_device, "irq_ack: %u.%u\n", gpio, d->irq);
+ dev_dbg(bank->gc.parent, "irq_ack: %u.%u\n", gpio, d->irq);
iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVST);
}
@@ -301,7 +300,7 @@ static void npcmgpio_irq_mask(struct irq_data *d)
unsigned int gpio = d->hwirq;
/* Clear events */
- dev_dbg(d->chip->parent_device, "irq_mask: %u.%u\n", gpio, d->irq);
+ dev_dbg(bank->gc.parent, "irq_mask: %u.%u\n", gpio, d->irq);
iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVENC);
}
@@ -313,7 +312,7 @@ static void npcmgpio_irq_unmask(struct irq_data *d)
unsigned int gpio = d->hwirq;
/* Enable events */
- dev_dbg(d->chip->parent_device, "irq_unmask: %u.%u\n", gpio, d->irq);
+ dev_dbg(bank->gc.parent, "irq_unmask: %u.%u\n", gpio, d->irq);
iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVENS);
}
@@ -323,7 +322,7 @@ static unsigned int npcmgpio_irq_startup(struct irq_data *d)
unsigned int gpio = d->hwirq;
/* active-high, input, clear interrupt, enable interrupt */
- dev_dbg(d->chip->parent_device, "startup: %u.%u\n", gpio, d->irq);
+ dev_dbg(gc->parent, "startup: %u.%u\n", gpio, d->irq);
npcmgpio_direction_input(gc, gpio);
npcmgpio_irq_ack(d);
npcmgpio_irq_unmask(d);
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit abdb8bc94be4cf68aa71c9a8ee0bad9b3e6f52d3 ]
Similar to mt7915_mcu_wtbl_generic_tlv, rely on vif->bss_conf.aid for
aid in sta mode and not on sta->aid.
Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index b157db9f8903..e9d854e3293e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1454,12 +1454,15 @@ mt7915_mcu_sta_basic_tlv(struct sk_buff *skb, struct ieee80211_vif *vif,
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_AP:
basic->conn_type = cpu_to_le32(CONNECTION_INFRA_STA);
+ basic->aid = cpu_to_le16(sta->aid);
break;
case NL80211_IFTYPE_STATION:
basic->conn_type = cpu_to_le32(CONNECTION_INFRA_AP);
+ basic->aid = cpu_to_le16(vif->bss_conf.aid);
break;
case NL80211_IFTYPE_ADHOC:
basic->conn_type = cpu_to_le32(CONNECTION_IBSS_ADHOC);
+ basic->aid = cpu_to_le16(sta->aid);
break;
default:
WARN_ON(1);
@@ -1467,7 +1470,6 @@ mt7915_mcu_sta_basic_tlv(struct sk_buff *skb, struct ieee80211_vif *vif,
}
memcpy(basic->peer_addr, sta->addr, ETH_ALEN);
- basic->aid = cpu_to_le16(sta->aid);
basic->qos = sta->wme;
}
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit 0788785c78342d422f93b1c9831c2b2b7f137937 ]
Initialize the spinlock and make the data structures available before
registering the interrupt handlers.
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rz-ssi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sh/rz-ssi.c b/sound/soc/sh/rz-ssi.c
index 37466f65c2b0..16de2633a873 100644
--- a/sound/soc/sh/rz-ssi.c
+++ b/sound/soc/sh/rz-ssi.c
@@ -977,6 +977,9 @@ static int rz_ssi_probe(struct platform_device *pdev)
ssi->playback.priv = ssi;
ssi->capture.priv = ssi;
+ spin_lock_init(&ssi->lock);
+ dev_set_drvdata(&pdev->dev, ssi);
+
/* Error Interrupt */
ssi->irq_int = platform_get_irq_byname(pdev, "int_req");
if (ssi->irq_int < 0)
@@ -1024,8 +1027,6 @@ static int rz_ssi_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
pm_runtime_resume_and_get(&pdev->dev);
- spin_lock_init(&ssi->lock);
- dev_set_drvdata(&pdev->dev, ssi);
ret = devm_snd_soc_register_component(&pdev->dev, &rz_ssi_soc_component,
rz_ssi_soc_dai,
ARRAY_SIZE(rz_ssi_soc_dai));
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit 1b83ec057db16b4d0697dc21ef7a9743b6041f72 upstream.
Make 'ui->data_len' aligned with 8 bytes before it is assigned to
dirtied_ino_d. Since 8871d84c8f8b0c6b("ubifs: convert to fileattr")
applied, 'setflags()' only affects regular files and directories, only
xattr inode, symlink inode and special inode(pipe/char_dev/block_dev)
have none- zero 'ui->data_len' field, so assertion
'!(req->dirtied_ino_d & 7)' cannot fail in ubifs_budget_space().
To avoid assertion fails in future evolution(eg. setflags can operate
special inodes), it's better to make dirtied_ino_d 8 bytes aligned,
after all aligned size is still zero for regular files.
Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ubifs/ioctl.c
+++ b/fs/ubifs/ioctl.c
@@ -108,7 +108,7 @@ static int setflags(struct inode *inode,
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_info *c = inode->i_sb->s_fs_info;
struct ubifs_budget_req req = { .dirtied_ino = 1,
- .dirtied_ino_d = ui->data_len };
+ .dirtied_ino_d = ALIGN(ui->data_len, 8) };
err = ubifs_budget_space(c, &req);
if (err)
From: Theodore Ts'o <[email protected]>
[ Upstream commit cc5095747edfb054ca2068d01af20be3fcc3634f ]
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
[1] https://lore.kernel.org/linux-mm/[email protected]
[2] https://lore.kernel.org/r/[email protected]
Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
Reported-by: Lee Jones <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/inode.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 22a5140546fb..fff52292c01e 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1992,6 +1992,15 @@ static int ext4_writepage(struct page *page,
else
len = PAGE_SIZE;
+ /* Should never happen but for bugs in other kernel subsystems */
+ if (!page_has_buffers(page)) {
+ ext4_warning_inode(inode,
+ "page %lu does not have buffers attached", page->index);
+ ClearPageDirty(page);
+ unlock_page(page);
+ return 0;
+ }
+
page_bufs = page_buffers(page);
/*
* We cannot do block allocation or other extent handling in this
@@ -2595,6 +2604,22 @@ static int mpage_prepare_extent_to_map(struct mpage_da_data *mpd)
wait_on_page_writeback(page);
BUG_ON(PageWriteback(page));
+ /*
+ * Should never happen but for buggy code in
+ * other subsystems that call
+ * set_page_dirty() without properly warning
+ * the file system first. See [1] for more
+ * information.
+ *
+ * [1] https://lore.kernel.org/linux-mm/[email protected]
+ */
+ if (!page_has_buffers(page)) {
+ ext4_warning_inode(mpd->inode, "page %lu does not have buffers attached", page->index);
+ ClearPageDirty(page);
+ unlock_page(page);
+ continue;
+ }
+
if (mpd->map.m_len == 0)
mpd->first_page = page->index;
mpd->next_page = page->index + 1;
--
2.34.1
From: Ian Rogers <[email protected]>
commit 3bad20d7d129c3b3063658a0f83974dfe6dac5c4 upstream.
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 1.26:
https://download.01.org/perfmon/SKX
Json files generated by:
https://github.com/intel/event-converter-for-linux-perf
Fixes were made that allow the skx-metrics.json to successfully
generate, bringing back TopdownL1 metrics.
Tested:
$ perf test
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : Skip
91: perf all PMU test : Ok
...
90 skips due to a lack of floating point samples, which is
understandable.
Fixes: c4ad8fabd03f76ed ("perf vendor events: Update metrics for SkyLake Server")
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Zhengjun Xing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/pmu-events/arch/x86/skylakex/cache.json | 111 +-
tools/perf/pmu-events/arch/x86/skylakex/floating-point.json | 24
tools/perf/pmu-events/arch/x86/skylakex/frontend.json | 18
tools/perf/pmu-events/arch/x86/skylakex/memory.json | 96 +-
tools/perf/pmu-events/arch/x86/skylakex/pipeline.json | 11
tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json | 461 ++++++++++--
tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json | 23
7 files changed, 591 insertions(+), 153 deletions(-)
--- a/tools/perf/pmu-events/arch/x86/skylakex/cache.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/cache.json
@@ -315,6 +315,19 @@
"UMask": "0x82"
},
{
+ "BriefDescription": "All retired memory instructions.",
+ "Counter": "0,1,2,3",
+ "CounterHTOff": "0,1,2,3",
+ "Data_LA": "1",
+ "EventCode": "0xD0",
+ "EventName": "MEM_INST_RETIRED.ANY",
+ "L1_Hit_Indication": "1",
+ "PEBS": "1",
+ "PublicDescription": "Counts all retired memory instructions - loads and stores.",
+ "SampleAfterValue": "2000003",
+ "UMask": "0x83"
+ },
+ {
"BriefDescription": "Retired load instructions with locked access.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3",
@@ -358,6 +371,7 @@
"EventCode": "0xD0",
"EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
"PEBS": "1",
+ "PublicDescription": "Number of retired load instructions that (start a) miss in the 2nd-level TLB (STLB).",
"SampleAfterValue": "100003",
"UMask": "0x11"
},
@@ -370,6 +384,7 @@
"EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
"L1_Hit_Indication": "1",
"PEBS": "1",
+ "PublicDescription": "Number of retired store instructions that (start a) miss in the 2nd-level TLB (STLB).",
"SampleAfterValue": "100003",
"UMask": "0x12"
},
@@ -733,7 +748,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010491",
+ "MSRValue": "0x10491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -772,7 +787,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0491",
+ "MSRValue": "0x4003C0491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -785,7 +800,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0491",
+ "MSRValue": "0x1003C0491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -798,7 +813,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0491",
+ "MSRValue": "0x8003C0491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -811,7 +826,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010490",
+ "MSRValue": "0x10490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -850,7 +865,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0490",
+ "MSRValue": "0x4003C0490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -863,7 +878,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0490",
+ "MSRValue": "0x1003C0490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -876,7 +891,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0490",
+ "MSRValue": "0x8003C0490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -889,7 +904,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010120",
+ "MSRValue": "0x10120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -928,7 +943,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0120",
+ "MSRValue": "0x4003C0120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -941,7 +956,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0120",
+ "MSRValue": "0x1003C0120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -954,7 +969,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0120",
+ "MSRValue": "0x8003C0120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -967,7 +982,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010122",
+ "MSRValue": "0x10122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1006,7 +1021,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0122",
+ "MSRValue": "0x4003C0122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1019,7 +1034,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0122",
+ "MSRValue": "0x1003C0122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1032,7 +1047,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0122",
+ "MSRValue": "0x8003C0122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1045,7 +1060,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010004",
+ "MSRValue": "0x10004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1084,7 +1099,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0004",
+ "MSRValue": "0x4003C0004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1097,7 +1112,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0004",
+ "MSRValue": "0x1003C0004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1110,7 +1125,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0004",
+ "MSRValue": "0x8003C0004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1123,7 +1138,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010001",
+ "MSRValue": "0x10001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1162,7 +1177,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0001",
+ "MSRValue": "0x4003C0001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1175,7 +1190,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0001",
+ "MSRValue": "0x1003C0001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1188,7 +1203,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0001",
+ "MSRValue": "0x8003C0001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1201,7 +1216,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010002",
+ "MSRValue": "0x10002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1240,7 +1255,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0002",
+ "MSRValue": "0x4003C0002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1253,7 +1268,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0002",
+ "MSRValue": "0x1003C0002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1266,7 +1281,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0002",
+ "MSRValue": "0x8003C0002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1279,7 +1294,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010400",
+ "MSRValue": "0x10400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1318,7 +1333,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0400",
+ "MSRValue": "0x4003C0400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1331,7 +1346,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0400",
+ "MSRValue": "0x1003C0400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1344,7 +1359,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0400",
+ "MSRValue": "0x8003C0400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1357,7 +1372,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010010",
+ "MSRValue": "0x10010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1396,7 +1411,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0010",
+ "MSRValue": "0x4003C0010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1409,7 +1424,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0010",
+ "MSRValue": "0x1003C0010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1422,7 +1437,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0010",
+ "MSRValue": "0x8003C0010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1435,7 +1450,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010020",
+ "MSRValue": "0x10020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1474,7 +1489,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0020",
+ "MSRValue": "0x4003C0020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1487,7 +1502,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0020",
+ "MSRValue": "0x1003C0020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1500,7 +1515,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0020",
+ "MSRValue": "0x8003C0020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1513,7 +1528,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010080",
+ "MSRValue": "0x10080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1552,7 +1567,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0080",
+ "MSRValue": "0x4003C0080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1565,7 +1580,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0080",
+ "MSRValue": "0x1003C0080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1578,7 +1593,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0080",
+ "MSRValue": "0x8003C0080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1591,7 +1606,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0000010100",
+ "MSRValue": "0x10100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1630,7 +1645,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x04003C0100",
+ "MSRValue": "0x4003C0100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1643,7 +1658,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x01003C0100",
+ "MSRValue": "0x1003C0100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1656,7 +1671,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x08003C0100",
+ "MSRValue": "0x8003C0100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
--- a/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
@@ -1,73 +1,81 @@
[
{
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT14 RCP14 DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD 128-bit packed computational double precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
+ "PublicDescription": "Counts once for most SIMD 128-bit packed computational double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x4"
},
{
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD 128-bit packed computational single precision floating-point instruction retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
+ "PublicDescription": "Counts once for most SIMD 128-bit packed computational single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x8"
},
{
- "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD 256-bit packed double computational precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
+ "PublicDescription": "Counts once for most SIMD 256-bit packed double computational precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x10"
},
{
- "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD 256-bit packed single computational precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
+ "PublicDescription": "Counts once for most SIMD 256-bit packed single computational precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x20"
},
{
- "BriefDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 8 calculations per element.",
+ "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
+ "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x40"
},
{
- "BriefDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 16 calculations per element.",
+ "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE",
+ "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x80"
},
{
- "BriefDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD scalar computational double precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
+ "PublicDescription": "Counts once for most SIMD scalar computational double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SIMD scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x1"
},
{
- "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "BriefDescription": "Counts once for most SIMD scalar computational single precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC7",
"EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
+ "PublicDescription": "Counts once for most SIMD scalar computational single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SIMD scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x2"
},
--- a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
@@ -30,7 +30,21 @@
"UMask": "0x2"
},
{
- "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss.",
+ "BriefDescription": "Retired Instructions who experienced DSB miss.",
+ "Counter": "0,1,2,3",
+ "CounterHTOff": "0,1,2,3",
+ "EventCode": "0xC6",
+ "EventName": "FRONTEND_RETIRED.ANY_DSB_MISS",
+ "MSRIndex": "0x3F7",
+ "MSRValue": "0x1",
+ "PEBS": "1",
+ "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
+ "SampleAfterValue": "100007",
+ "TakenAlone": "1",
+ "UMask": "0x1"
+ },
+ {
+ "BriefDescription": "Retired Instructions who experienced a critical DSB miss.",
"Counter": "0,1,2,3",
"CounterHTOff": "0,1,2,3",
"EventCode": "0xC6",
@@ -38,7 +52,7 @@
"MSRIndex": "0x3F7",
"MSRValue": "0x11",
"PEBS": "1",
- "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
+ "PublicDescription": "Number of retired Instructions that experienced a critical DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. Critical means stalls were exposed to the back-end as a result of the DSB miss.",
"SampleAfterValue": "100007",
"TakenAlone": "1",
"UMask": "0x1"
--- a/tools/perf/pmu-events/arch/x86/skylakex/memory.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/memory.json
@@ -299,7 +299,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00491",
+ "MSRValue": "0x83FC00491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -312,7 +312,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00491",
+ "MSRValue": "0x63FC00491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -325,7 +325,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000491",
+ "MSRValue": "0x604000491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -338,7 +338,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800491",
+ "MSRValue": "0x63B800491",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -377,7 +377,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00490",
+ "MSRValue": "0x83FC00490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -390,7 +390,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00490",
+ "MSRValue": "0x63FC00490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -403,7 +403,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000490",
+ "MSRValue": "0x604000490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -416,7 +416,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800490",
+ "MSRValue": "0x63B800490",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -455,7 +455,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00120",
+ "MSRValue": "0x83FC00120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -468,7 +468,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00120",
+ "MSRValue": "0x63FC00120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -481,7 +481,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000120",
+ "MSRValue": "0x604000120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -494,7 +494,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800120",
+ "MSRValue": "0x63B800120",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -533,7 +533,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00122",
+ "MSRValue": "0x83FC00122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -546,7 +546,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00122",
+ "MSRValue": "0x63FC00122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -559,7 +559,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000122",
+ "MSRValue": "0x604000122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -572,7 +572,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800122",
+ "MSRValue": "0x63B800122",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -611,7 +611,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00004",
+ "MSRValue": "0x83FC00004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -624,7 +624,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00004",
+ "MSRValue": "0x63FC00004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -637,7 +637,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000004",
+ "MSRValue": "0x604000004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -650,7 +650,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800004",
+ "MSRValue": "0x63B800004",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -689,7 +689,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00001",
+ "MSRValue": "0x83FC00001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -702,7 +702,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00001",
+ "MSRValue": "0x63FC00001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -715,7 +715,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000001",
+ "MSRValue": "0x604000001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -728,7 +728,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800001",
+ "MSRValue": "0x63B800001",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -767,7 +767,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00002",
+ "MSRValue": "0x83FC00002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -780,7 +780,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00002",
+ "MSRValue": "0x63FC00002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -793,7 +793,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000002",
+ "MSRValue": "0x604000002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -806,7 +806,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800002",
+ "MSRValue": "0x63B800002",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -845,7 +845,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00400",
+ "MSRValue": "0x83FC00400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -858,7 +858,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00400",
+ "MSRValue": "0x63FC00400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -871,7 +871,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000400",
+ "MSRValue": "0x604000400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -884,7 +884,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800400",
+ "MSRValue": "0x63B800400",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -923,7 +923,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00010",
+ "MSRValue": "0x83FC00010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -936,7 +936,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00010",
+ "MSRValue": "0x63FC00010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -949,7 +949,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000010",
+ "MSRValue": "0x604000010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -962,7 +962,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800010",
+ "MSRValue": "0x63B800010",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1001,7 +1001,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00020",
+ "MSRValue": "0x83FC00020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1014,7 +1014,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00020",
+ "MSRValue": "0x63FC00020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1027,7 +1027,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000020",
+ "MSRValue": "0x604000020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1040,7 +1040,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800020",
+ "MSRValue": "0x63B800020",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1079,7 +1079,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00080",
+ "MSRValue": "0x83FC00080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1092,7 +1092,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00080",
+ "MSRValue": "0x63FC00080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1105,7 +1105,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000080",
+ "MSRValue": "0x604000080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1118,7 +1118,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800080",
+ "MSRValue": "0x63B800080",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1157,7 +1157,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x083FC00100",
+ "MSRValue": "0x83FC00100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1170,7 +1170,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063FC00100",
+ "MSRValue": "0x63FC00100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1183,7 +1183,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x0604000100",
+ "MSRValue": "0x604000100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
@@ -1196,7 +1196,7 @@
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "MSRValue": "0x063B800100",
+ "MSRValue": "0x63B800100",
"Offcore": "1",
"PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
--- a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
@@ -436,6 +436,17 @@
"SampleAfterValue": "2000003"
},
{
+ "BriefDescription": "Number of all retired NOP instructions.",
+ "Counter": "0,1,2,3",
+ "CounterHTOff": "0,1,2,3,4,5,6,7",
+ "Errata": "SKL091, SKL044",
+ "EventCode": "0xC0",
+ "EventName": "INST_RETIRED.NOP",
+ "PEBS": "1",
+ "SampleAfterValue": "2000003",
+ "UMask": "0x2"
+ },
+ {
"BriefDescription": "Precise instruction retired event with HW to reduce effect of PEBS shadow in IP distribution",
"Counter": "1",
"CounterHTOff": "1",
--- a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
@@ -1,26 +1,167 @@
[
{
+ "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend",
+ "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)",
+ "MetricGroup": "TopdownL1",
+ "MetricName": "Frontend_Bound",
+ "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+ "MetricGroup": "TopdownL1_SMT",
+ "MetricName": "Frontend_Bound_SMT",
+ "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations",
+ "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD)",
+ "MetricGroup": "TopdownL1",
+ "MetricName": "Bad_Speculation",
+ "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+ "MetricGroup": "TopdownL1_SMT",
+ "MetricName": "Bad_Speculation_SMT",
+ "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend",
+ "MetricConstraint": "NO_NMI_WATCHDOG",
+ "MetricExpr": "1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD)",
+ "MetricGroup": "TopdownL1",
+ "MetricName": "Backend_Bound",
+ "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+ "MetricGroup": "TopdownL1_SMT",
+ "MetricName": "Backend_Bound_SMT",
+ "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired",
+ "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)",
+ "MetricGroup": "TopdownL1",
+ "MetricName": "Retiring",
+ "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum Pipeline_Width throughput was achieved. Maximizing Retiring typically increases the Instructions-per-cycle (see IPC metric). Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Heavy-operations or Microcode Assists are categorized under Retiring. They often indicate suboptimal performance and can often be optimized or avoided. "
+ },
+ {
+ "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
+ "MetricGroup": "TopdownL1_SMT",
+ "MetricName": "Retiring_SMT",
+ "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum Pipeline_Width throughput was achieved. Maximizing Retiring typically increases the Instructions-per-cycle (see IPC metric). Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Heavy-operations or Microcode Assists are categorized under Retiring. They often indicate suboptimal performance and can often be optimized or avoided. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Branch Misprediction related bottlenecks",
+ "MetricExpr": "100 * ( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) )",
+ "MetricGroup": "Bad;BadSpec;BrMispredicts",
+ "MetricName": "Mispredictions"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Branch Misprediction related bottlenecks",
+ "MetricExpr": "100 * ( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) )",
+ "MetricGroup": "Bad;BadSpec;BrMispredicts_SMT",
+ "MetricName": "Mispredictions_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of (external) Memory Bandwidth related bottlenecks",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) * ( ( (CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (min( CPU_CLK_UNHALTED.THREAD , cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=4@ ) / CPU_CLK_UNHALTED.THREAD) / #(CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) ) + ( (( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (OFFCORE_REQUESTS_BUFFER.SQ_FULL / CPU_CLK_UNHALTED.THREAD) / #(( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) ) ) + ( (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( ((L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )) * cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ / CPU_CLK_UNHALTED.THREAD) / #(max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) ) ",
+ "MetricGroup": "Mem;MemoryBW;Offcore",
+ "MetricName": "Memory_Bandwidth"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of (external) Memory Bandwidth related bottlenecks",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * ( ( (CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (min( CPU_CLK_UNHALTED.THREAD , cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=4@ ) / CPU_CLK_UNHALTED.THREAD) / #(CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) ) + ( (( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (( OFFCORE_REQUESTS_BUFFER.SQ_FULL / 2 ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) / #(( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) ) ) + ( (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( ((L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )) * cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ / CPU_CLK_UNHALTED.THREAD) / #(max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) ) ",
+ "MetricGroup": "Mem;MemoryBW;Offcore_SMT",
+ "MetricName": "Memory_Bandwidth_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Memory Latency related bottlenecks (external memory and off-core caches)",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) * ( ( (CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (min( CPU_CLK_UNHALTED.THREAD , OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD ) / CPU_CLK_UNHALTED.THREAD - (min( CPU_CLK_UNHALTED.THREAD , cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=4@ ) / CPU_CLK_UNHALTED.THREAD)) / #(CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) ) + ( (( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (( (20.5 * ((CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time)) - (3.5 * ((CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time)) ) * MEM_LOAD_RETIRED.L3_HIT * (1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) / 2) / CPU_CLK_UNHALTED.THREAD) / #(( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) ) + ( (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD)) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) )",
+ "MetricGroup": "Mem;MemoryLat;Offcore",
+ "MetricName": "Memory_Latency"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Memory Latency related bottlenecks (external memory and off-core caches)",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * ( ( (CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (min( CPU_CLK_UNHALTED.THREAD , OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD ) / CPU_CLK_UNHALTED.THREAD - (min( CPU_CLK_UNHALTED.THREAD , cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=4@ ) / CPU_CLK_UNHALTED.THREAD)) / #(CYCLE_ACTIVITY.STALLS_L3_MISS / CPU_CLK_UNHALTED.THREAD + (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD) - (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD))) ) + ( (( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (( (20.5 * ((CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time)) - (3.5 * ((CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time)) ) * MEM_LOAD_RETIRED.L3_HIT * (1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) / 2) / CPU_CLK_UNHALTED.THREAD) / #(( CYCLE_ACTIVITY.STALLS_L2_MISS - CYCLE_ACTIVITY.STALLS_L3_MISS ) / CPU_CLK_UNHALTED.THREAD) ) + ( (( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) / ( (MEM_LOAD_RETIRED.L2_HIT * ( 1 + (MEM_LOAD_RETIRED.FB_HIT / MEM_LOAD_RETIRED.L1_MISS) )) + cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ ) ) * (( CYCLE_ACTIVITY.STALLS_L1D_MISS - CYCLE_ACTIVITY.STALLS_L2_MISS ) / CPU_CLK_UNHALTED.THREAD)) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) )",
+ "MetricGroup": "Mem;MemoryLat;Offcore_SMT",
+ "MetricName": "Memory_Latency_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Memory Address Translation related bottlenecks (data-side TLBs)",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) * ( ( (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) / ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (min( 9 * cpu@DTLB_LOAD_MISSES.STLB_HIT\\,cmask\\=1@ + DTLB_LOAD_MISSES.WALK_ACTIVE , max( CYCLE_ACTIVITY.CYCLES_MEM_ANY - CYCLE_ACTIVITY.CYCLES_L1D_MISS , 0 ) ) / CPU_CLK_UNHALTED.THREAD) / (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) ) + ( (EXE_ACTIVITY.BOUND_ON_STORES / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - ( UOPS_ISSUED.ANY + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) ) * ( (( 9 * cpu@DTLB_STORE_MISSES.STLB_HIT\\,cmask\\=1@ + DTLB_STORE_MISSES.WALK_ACTIVE ) / CPU_CLK_UNHALTED.THREAD) / #(EXE_ACTIVITY.BOUND_ON_STORES / CPU_CLK_UNHALTED.THREAD) ) ) ",
+ "MetricGroup": "Mem;MemoryTLB",
+ "MetricName": "Memory_Data_TLBs"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of Memory Address Translation related bottlenecks (data-side TLBs)",
+ "MetricExpr": "100 * ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * ( ( (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) / ((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (min( 9 * cpu@DTLB_LOAD_MISSES.STLB_HIT\\,cmask\\=1@ + DTLB_LOAD_MISSES.WALK_ACTIVE , max( CYCLE_ACTIVITY.CYCLES_MEM_ANY - CYCLE_ACTIVITY.CYCLES_L1D_MISS , 0 ) ) / CPU_CLK_UNHALTED.THREAD) / (max( ( CYCLE_ACTIVITY.STALLS_MEM_ANY - CYCLE_ACTIVITY.STALLS_L1D_MISS ) / CPU_CLK_UNHALTED.THREAD , 0 )) ) + ( (EXE_ACTIVITY.BOUND_ON_STORES / CPU_CLK_UNHALTED.THREAD) / #((( CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES ) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES)) * (1 - (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - ( UOPS_ISSUED.ANY + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * ( (( 9 * cpu@DTLB_STORE_MISSES.STLB_HIT\\,cmask\\=1@ + DTLB_STORE_MISSES.WALK_ACTIVE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) / #(EXE_ACTIVITY.BOUND_ON_STORES / CPU_CLK_UNHALTED.THREAD) ) ) ",
+ "MetricGroup": "Mem;MemoryTLB;_SMT",
+ "MetricName": "Memory_Data_TLBs_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of branch related instructions (used for program control-flow including function calls)",
+ "MetricExpr": "100 * (( BR_INST_RETIRED.CONDITIONAL + 3 * BR_INST_RETIRED.NEAR_CALL + (BR_INST_RETIRED.NEAR_TAKEN - ( BR_INST_RETIRED.CONDITIONAL - BR_INST_RETIRED.NOT_TAKEN ) - 2 * BR_INST_RETIRED.NEAR_CALL) ) / (4 * CPU_CLK_UNHALTED.THREAD))",
+ "MetricGroup": "Ret",
+ "MetricName": "Branching_Overhead"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of branch related instructions (used for program control-flow including function calls)",
+ "MetricExpr": "100 * (( BR_INST_RETIRED.CONDITIONAL + 3 * BR_INST_RETIRED.NEAR_CALL + (BR_INST_RETIRED.NEAR_TAKEN - ( BR_INST_RETIRED.CONDITIONAL - BR_INST_RETIRED.NOT_TAKEN ) - 2 * BR_INST_RETIRED.NEAR_CALL) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))",
+ "MetricGroup": "Ret_SMT",
+ "MetricName": "Branching_Overhead_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of instruction fetch related bottlenecks by large code footprint programs (i-side cache; TLB and BTB misses)",
+ "MetricExpr": "100 * (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ( (ICACHE_64B.IFTAG_STALL / CPU_CLK_UNHALTED.THREAD) + (( ICACHE_16B.IFDATA_STALL + 2 * cpu@ICACHE_16B.IFDATA_STALL\\,cmask\\=1\\,edge@ ) / CPU_CLK_UNHALTED.THREAD) + (9 * BACLEARS.ANY / CPU_CLK_UNHALTED.THREAD) ) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD))",
+ "MetricGroup": "BigFoot;Fed;Frontend;IcMiss;MemoryTLB",
+ "MetricName": "Big_Code"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of instruction fetch related bottlenecks by large code footprint programs (i-side cache; TLB and BTB misses)",
+ "MetricExpr": "100 * (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ( (ICACHE_64B.IFTAG_STALL / CPU_CLK_UNHALTED.THREAD) + (( ICACHE_16B.IFDATA_STALL + 2 * cpu@ICACHE_16B.IFDATA_STALL\\,cmask\\=1\\,edge@ ) / CPU_CLK_UNHALTED.THREAD) + (9 * BACLEARS.ANY / CPU_CLK_UNHALTED.THREAD) ) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))",
+ "MetricGroup": "BigFoot;Fed;Frontend;IcMiss;MemoryTLB_SMT",
+ "MetricName": "Big_Code_SMT"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of instruction fetch bandwidth related bottlenecks",
+ "MetricExpr": "100 * ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) ) - (100 * (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ( (ICACHE_64B.IFTAG_STALL / CPU_CLK_UNHALTED.THREAD) + (( ICACHE_16B.IFDATA_STALL + 2 * cpu@ICACHE_16B.IFDATA_STALL\\,cmask\\=1\\,edge@ ) / CPU_CLK_UNHALTED.THREAD) + (9 * BACLEARS.ANY / CPU_CLK_UNHALTED.THREAD) ) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)))",
+ "MetricGroup": "Fed;FetchBW;Frontend",
+ "MetricName": "Instruction_Fetch_BW"
+ },
+ {
+ "BriefDescription": "Total pipeline cost of instruction fetch bandwidth related bottlenecks",
+ "MetricExpr": "100 * ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) ) - (100 * (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ( (ICACHE_64B.IFTAG_STALL / CPU_CLK_UNHALTED.THREAD) + (( ICACHE_16B.IFDATA_STALL + 2 * cpu@ICACHE_16B.IFDATA_STALL\\,cmask\\=1\\,edge@ ) / CPU_CLK_UNHALTED.THREAD) + (9 * BACLEARS.ANY / CPU_CLK_UNHALTED.THREAD) ) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))",
+ "MetricGroup": "Fed;FetchBW;Frontend_SMT",
+ "MetricName": "Instruction_Fetch_BW_SMT"
+ },
+ {
"BriefDescription": "Instructions Per Cycle (per Logical Processor)",
"MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
- "MetricGroup": "Summary",
+ "MetricGroup": "Ret;Summary",
"MetricName": "IPC"
},
{
"BriefDescription": "Uops Per Instruction",
"MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY",
- "MetricGroup": "Pipeline;Retire",
+ "MetricGroup": "Pipeline;Ret;Retire",
"MetricName": "UPI"
},
{
"BriefDescription": "Instruction per taken branch",
- "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
- "MetricGroup": "Branches;FetchBW;PGO",
- "MetricName": "IpTB"
+ "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / BR_INST_RETIRED.NEAR_TAKEN",
+ "MetricGroup": "Branches;Fed;FetchBW",
+ "MetricName": "UpTB"
},
{
"BriefDescription": "Cycles Per Instruction (per Logical Processor)",
"MetricExpr": "1 / (INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD)",
- "MetricGroup": "Pipeline",
+ "MetricGroup": "Pipeline;Mem",
"MetricName": "CPI"
},
{
@@ -30,39 +171,84 @@
"MetricName": "CLKS"
},
{
- "BriefDescription": "Instructions Per Cycle (per physical core)",
+ "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
+ "MetricExpr": "4 * CPU_CLK_UNHALTED.THREAD",
+ "MetricGroup": "TmaL1",
+ "MetricName": "SLOTS"
+ },
+ {
+ "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
+ "MetricExpr": "4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+ "MetricGroup": "TmaL1_SMT",
+ "MetricName": "SLOTS_SMT"
+ },
+ {
+ "BriefDescription": "The ratio of Executed- by Issued-Uops",
+ "MetricExpr": "UOPS_EXECUTED.THREAD / UOPS_ISSUED.ANY",
+ "MetricGroup": "Cor;Pipeline",
+ "MetricName": "Execute_per_Issue",
+ "PublicDescription": "The ratio of Executed- by Issued-Uops. Ratio > 1 suggests high rate of uop micro-fusions. Ratio < 1 suggest high rate of \"execute\" at rename stage."
+ },
+ {
+ "BriefDescription": "Instructions Per Cycle across hyper-threads (per physical core)",
"MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
- "MetricGroup": "SMT;TmaL1",
+ "MetricGroup": "Ret;SMT;TmaL1",
"MetricName": "CoreIPC"
},
{
- "BriefDescription": "Instructions Per Cycle (per physical core)",
+ "BriefDescription": "Instructions Per Cycle across hyper-threads (per physical core)",
"MetricExpr": "INST_RETIRED.ANY / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
- "MetricGroup": "SMT;TmaL1",
+ "MetricGroup": "Ret;SMT;TmaL1_SMT",
"MetricName": "CoreIPC_SMT"
},
{
"BriefDescription": "Floating Point Operations Per Cycle",
"MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / CPU_CLK_UNHALTED.THREAD",
- "MetricGroup": "Flops",
+ "MetricGroup": "Ret;Flops",
"MetricName": "FLOPc"
},
{
"BriefDescription": "Floating Point Operations Per Cycle",
"MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
- "MetricGroup": "Flops_SMT",
+ "MetricGroup": "Ret;Flops_SMT",
"MetricName": "FLOPc_SMT"
},
{
+ "BriefDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width)",
+ "MetricExpr": "( (FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE) + (FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE) ) / ( 2 * CPU_CLK_UNHALTED.THREAD )",
+ "MetricGroup": "Cor;Flops;HPC",
+ "MetricName": "FP_Arith_Utilization",
+ "PublicDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width). Values > 1 are possible due to Fused-Multiply Add (FMA) counting."
+ },
+ {
+ "BriefDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width). SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "( (FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE) + (FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE) ) / ( 2 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ) )",
+ "MetricGroup": "Cor;Flops;HPC_SMT",
+ "MetricName": "FP_Arith_Utilization_SMT",
+ "PublicDescription": "Actual per-core usage of the Floating Point execution units (regardless of the vector width). Values > 1 are possible due to Fused-Multiply Add (FMA) counting. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
"BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
"MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)",
- "MetricGroup": "Pipeline;PortsUtil",
+ "MetricGroup": "Backend;Cor;Pipeline;PortsUtil",
"MetricName": "ILP"
},
{
+ "BriefDescription": "Branch Misprediction Cost: Fraction of TMA slots wasted per non-speculative branch misprediction (retired JEClear)",
+ "MetricExpr": " ( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) ) * (4 * CPU_CLK_UNHALTED.THREAD) / BR_MISP_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;BrMispredicts",
+ "MetricName": "Branch_Misprediction_Cost"
+ },
+ {
+ "BriefDescription": "Branch Misprediction Cost: Fraction of TMA slots wasted per non-speculative branch misprediction (retired JEClear)",
+ "MetricExpr": " ( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * INT_MISC.CLEAR_RESTEER_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) ) * (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) / BR_MISP_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;BrMispredicts_SMT",
+ "MetricName": "Branch_Misprediction_Cost_SMT"
+ },
+ {
"BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
"MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
- "MetricGroup": "BrMispredicts",
+ "MetricGroup": "Bad;BadSpec;BrMispredicts",
"MetricName": "IpMispredict"
},
{
@@ -86,122 +272,249 @@
{
"BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
- "MetricGroup": "Branches;InsType",
+ "MetricGroup": "Branches;Fed;InsType",
"MetricName": "IpBranch"
},
{
"BriefDescription": "Instructions per (near) call (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL",
- "MetricGroup": "Branches",
+ "MetricGroup": "Branches;Fed;PGO",
"MetricName": "IpCall"
},
{
+ "BriefDescription": "Instruction per taken branch",
+ "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
+ "MetricGroup": "Branches;Fed;FetchBW;Frontend;PGO",
+ "MetricName": "IpTB"
+ },
+ {
"BriefDescription": "Branch instructions per taken branch. ",
"MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN",
- "MetricGroup": "Branches;PGO",
+ "MetricGroup": "Branches;Fed;PGO",
"MetricName": "BpTkBranch"
},
{
"BriefDescription": "Instructions per Floating Point (FP) Operation (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )",
- "MetricGroup": "Flops;FpArith;InsType",
+ "MetricGroup": "Flops;InsType",
"MetricName": "IpFLOP"
},
{
+ "BriefDescription": "Instructions per FP Arithmetic instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / ( (FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE) + (FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE) )",
+ "MetricGroup": "Flops;InsType",
+ "MetricName": "IpArith",
+ "PublicDescription": "Instructions per FP Arithmetic instruction (lower number means higher occurrence rate). May undercount due to FMA double counting. Approximated prior to BDW."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic Scalar Single-Precision instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
+ "MetricGroup": "Flops;FpScalar;InsType",
+ "MetricName": "IpArith_Scalar_SP",
+ "PublicDescription": "Instructions per FP Arithmetic Scalar Single-Precision instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic Scalar Double-Precision instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
+ "MetricGroup": "Flops;FpScalar;InsType",
+ "MetricName": "IpArith_Scalar_DP",
+ "PublicDescription": "Instructions per FP Arithmetic Scalar Double-Precision instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic AVX/SSE 128-bit instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / ( FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE )",
+ "MetricGroup": "Flops;FpVector;InsType",
+ "MetricName": "IpArith_AVX128",
+ "PublicDescription": "Instructions per FP Arithmetic AVX/SSE 128-bit instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic AVX* 256-bit instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / ( FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )",
+ "MetricGroup": "Flops;FpVector;InsType",
+ "MetricName": "IpArith_AVX256",
+ "PublicDescription": "Instructions per FP Arithmetic AVX* 256-bit instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
+ "BriefDescription": "Instructions per FP Arithmetic AVX 512-bit instruction (lower number means higher occurrence rate)",
+ "MetricExpr": "INST_RETIRED.ANY / ( FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE + FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )",
+ "MetricGroup": "Flops;FpVector;InsType",
+ "MetricName": "IpArith_AVX512",
+ "PublicDescription": "Instructions per FP Arithmetic AVX 512-bit instruction (lower number means higher occurrence rate). May undercount due to FMA double counting."
+ },
+ {
"BriefDescription": "Total number of retired Instructions, Sample with: INST_RETIRED.PREC_DIST",
"MetricExpr": "INST_RETIRED.ANY",
"MetricGroup": "Summary;TmaL1",
"MetricName": "Instructions"
},
{
+ "BriefDescription": "Average number of Uops issued by front-end when it issued something",
+ "MetricExpr": "UOPS_ISSUED.ANY / cpu@UOPS_ISSUED.ANY\\,cmask\\=1@",
+ "MetricGroup": "Fed;FetchBW",
+ "MetricName": "Fetch_UpC"
+ },
+ {
"BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
"MetricExpr": "IDQ.DSB_UOPS / (IDQ.DSB_UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
- "MetricGroup": "DSB;FetchBW",
+ "MetricGroup": "DSB;Fed;FetchBW",
"MetricName": "DSB_Coverage"
},
{
- "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)",
+ "BriefDescription": "Total penalty related to DSB (uop cache) misses - subset/see of/the Instruction_Fetch_BW Bottleneck.",
+ "MetricExpr": "(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) * (DSB2MITE_SWITCHES.PENALTY_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) + ((IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD))) * (( IDQ.ALL_MITE_CYCLES_ANY_UOPS - IDQ.ALL_MITE_CYCLES_4_UOPS ) / CPU_CLK_UNHALTED.THREAD / 2) / #((IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * CPU_CLK_UNHALTED.THREAD)))",
+ "MetricGroup": "DSBmiss;Fed",
+ "MetricName": "DSB_Misses_Cost"
+ },
+ {
+ "BriefDescription": "Total penalty related to DSB (uop cache) misses - subset/see of/the Instruction_Fetch_BW Bottleneck.",
+ "MetricExpr": "(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * (DSB2MITE_SWITCHES.PENALTY_CYCLES / CPU_CLK_UNHALTED.THREAD) / #(4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) + ((IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * (( IDQ.ALL_MITE_CYCLES_ANY_UOPS - IDQ.ALL_MITE_CYCLES_4_UOPS ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ) / 2) / #((IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) - (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))",
+ "MetricGroup": "DSBmiss;Fed_SMT",
+ "MetricName": "DSB_Misses_Cost_SMT"
+ },
+ {
+ "BriefDescription": "Number of Instructions per non-speculative DSB miss",
+ "MetricExpr": "INST_RETIRED.ANY / FRONTEND_RETIRED.ANY_DSB_MISS",
+ "MetricGroup": "DSBmiss;Fed",
+ "MetricName": "IpDSB_Miss_Ret"
+ },
+ {
+ "BriefDescription": "Fraction of branches that are non-taken conditionals",
+ "MetricExpr": "BR_INST_RETIRED.NOT_TAKEN / BR_INST_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;Branches;CodeGen;PGO",
+ "MetricName": "Cond_NT"
+ },
+ {
+ "BriefDescription": "Fraction of branches that are taken conditionals",
+ "MetricExpr": "( BR_INST_RETIRED.CONDITIONAL - BR_INST_RETIRED.NOT_TAKEN ) / BR_INST_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;Branches;CodeGen;PGO",
+ "MetricName": "Cond_TK"
+ },
+ {
+ "BriefDescription": "Fraction of branches that are CALL or RET",
+ "MetricExpr": "( BR_INST_RETIRED.NEAR_CALL + BR_INST_RETIRED.NEAR_RETURN ) / BR_INST_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;Branches",
+ "MetricName": "CallRet"
+ },
+ {
+ "BriefDescription": "Fraction of branches that are unconditional (direct or indirect) jumps",
+ "MetricExpr": "(BR_INST_RETIRED.NEAR_TAKEN - ( BR_INST_RETIRED.CONDITIONAL - BR_INST_RETIRED.NOT_TAKEN ) - 2 * BR_INST_RETIRED.NEAR_CALL) / BR_INST_RETIRED.ALL_BRANCHES",
+ "MetricGroup": "Bad;Branches",
+ "MetricName": "Jump"
+ },
+ {
+ "BriefDescription": "Actual Average Latency for L1 data-cache miss demand load instructions (in core cycles)",
"MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )",
- "MetricGroup": "MemoryBound;MemoryLat",
- "MetricName": "Load_Miss_Real_Latency"
+ "MetricGroup": "Mem;MemoryBound;MemoryLat",
+ "MetricName": "Load_Miss_Real_Latency",
+ "PublicDescription": "Actual Average Latency for L1 data-cache miss demand load instructions (in core cycles). Latency may be overestimated for multi-load instructions - e.g. repeat strings."
},
{
"BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-Logical Processor)",
"MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES",
- "MetricGroup": "MemoryBound;MemoryBW",
+ "MetricGroup": "Mem;MemoryBound;MemoryBW",
"MetricName": "MLP"
},
{
- "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
- "MetricConstraint": "NO_NMI_WATCHDOG",
- "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * CORE_CLKS )",
- "MetricGroup": "MemoryTLB",
- "MetricName": "Page_Walks_Utilization"
- },
- {
"BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]",
"MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
- "MetricGroup": "MemoryBW",
+ "MetricGroup": "Mem;MemoryBW",
"MetricName": "L1D_Cache_Fill_BW"
},
{
"BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]",
"MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time",
- "MetricGroup": "MemoryBW",
+ "MetricGroup": "Mem;MemoryBW",
"MetricName": "L2_Cache_Fill_BW"
},
{
"BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
"MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time",
- "MetricGroup": "MemoryBW",
+ "MetricGroup": "Mem;MemoryBW",
"MetricName": "L3_Cache_Fill_BW"
},
{
"BriefDescription": "Average per-core data access bandwidth to the L3 cache [GB / sec]",
"MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time",
- "MetricGroup": "MemoryBW;Offcore",
+ "MetricGroup": "Mem;MemoryBW;Offcore",
"MetricName": "L3_Cache_Access_BW"
},
{
"BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
"MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses",
+ "MetricGroup": "Mem;CacheMisses",
"MetricName": "L1MPKI"
},
{
+ "BriefDescription": "L1 cache true misses per kilo instruction for all demand loads (including speculative)",
+ "MetricExpr": "1000 * L2_RQSTS.ALL_DEMAND_DATA_RD / INST_RETIRED.ANY",
+ "MetricGroup": "Mem;CacheMisses",
+ "MetricName": "L1MPKI_Load"
+ },
+ {
"BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
"MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses",
+ "MetricGroup": "Mem;Backend;CacheMisses",
"MetricName": "L2MPKI"
},
{
"BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)",
"MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses;Offcore",
+ "MetricGroup": "Mem;CacheMisses;Offcore",
"MetricName": "L2MPKI_All"
},
{
+ "BriefDescription": "L2 cache misses per kilo instruction for all demand loads (including speculative)",
+ "MetricExpr": "1000 * L2_RQSTS.DEMAND_DATA_RD_MISS / INST_RETIRED.ANY",
+ "MetricGroup": "Mem;CacheMisses",
+ "MetricName": "L2MPKI_Load"
+ },
+ {
"BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)",
"MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses",
+ "MetricGroup": "Mem;CacheMisses",
"MetricName": "L2HPKI_All"
},
{
+ "BriefDescription": "L2 cache hits per kilo instruction for all demand loads (including speculative)",
+ "MetricExpr": "1000 * L2_RQSTS.DEMAND_DATA_RD_HIT / INST_RETIRED.ANY",
+ "MetricGroup": "Mem;CacheMisses",
+ "MetricName": "L2HPKI_Load"
+ },
+ {
"BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
"MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY",
- "MetricGroup": "CacheMisses",
+ "MetricGroup": "Mem;CacheMisses",
"MetricName": "L3MPKI"
},
{
+ "BriefDescription": "Fill Buffer (FB) true hits per kilo instructions for retired demand loads",
+ "MetricExpr": "1000 * MEM_LOAD_RETIRED.FB_HIT / INST_RETIRED.ANY",
+ "MetricGroup": "Mem;CacheMisses",
+ "MetricName": "FB_HPKI"
+ },
+ {
+ "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
+ "MetricConstraint": "NO_NMI_WATCHDOG",
+ "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * CPU_CLK_UNHALTED.THREAD )",
+ "MetricGroup": "Mem;MemoryTLB",
+ "MetricName": "Page_Walks_Utilization"
+ },
+ {
+ "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
+ "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ) )",
+ "MetricGroup": "Mem;MemoryTLB_SMT",
+ "MetricName": "Page_Walks_Utilization_SMT"
+ },
+ {
"BriefDescription": "Rate of silent evictions from the L2 cache per Kilo instruction where the evicted lines are dropped (no writeback to L3 or memory)",
"MetricExpr": "1000 * L2_LINES_OUT.SILENT / INST_RETIRED.ANY",
- "MetricGroup": "L2Evicts;Server",
+ "MetricGroup": "L2Evicts;Mem;Server",
"MetricName": "L2_Evictions_Silent_PKI"
},
{
"BriefDescription": "Rate of non silent evictions from the L2 cache per Kilo instruction",
"MetricExpr": "1000 * L2_LINES_OUT.NON_SILENT / INST_RETIRED.ANY",
- "MetricGroup": "L2Evicts;Server",
+ "MetricGroup": "L2Evicts;Mem;Server",
"MetricName": "L2_Evictions_NonSilent_PKI"
},
{
@@ -219,7 +532,7 @@
{
"BriefDescription": "Giga Floating Point Operations Per Second",
"MetricExpr": "( ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / 1000000000 ) / duration_time",
- "MetricGroup": "Flops;HPC",
+ "MetricGroup": "Cor;Flops;HPC",
"MetricName": "GFLOPs"
},
{
@@ -229,6 +542,48 @@
"MetricName": "Turbo_Utilization"
},
{
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for baseline license level 0",
+ "MetricExpr": "CORE_POWER.LVL0_TURBO_LICENSE / CPU_CLK_UNHALTED.THREAD",
+ "MetricGroup": "Power",
+ "MetricName": "Power_License0_Utilization",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for baseline license level 0. This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for baseline license level 0. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "CORE_POWER.LVL0_TURBO_LICENSE / 2 / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+ "MetricGroup": "Power_SMT",
+ "MetricName": "Power_License0_Utilization_SMT",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for baseline license level 0. This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 1",
+ "MetricExpr": "CORE_POWER.LVL1_TURBO_LICENSE / CPU_CLK_UNHALTED.THREAD",
+ "MetricGroup": "Power",
+ "MetricName": "Power_License1_Utilization",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 1. This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 1. SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "CORE_POWER.LVL1_TURBO_LICENSE / 2 / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+ "MetricGroup": "Power_SMT",
+ "MetricName": "Power_License1_Utilization_SMT",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 1. This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 2 (introduced in SKX)",
+ "MetricExpr": "CORE_POWER.LVL2_TURBO_LICENSE / CPU_CLK_UNHALTED.THREAD",
+ "MetricGroup": "Power",
+ "MetricName": "Power_License2_Utilization",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 2 (introduced in SKX). This includes high current AVX 512-bit instructions."
+ },
+ {
+ "BriefDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 2 (introduced in SKX). SMT version; use when SMT is enabled and measuring per logical CPU.",
+ "MetricExpr": "CORE_POWER.LVL2_TURBO_LICENSE / 2 / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+ "MetricGroup": "Power_SMT",
+ "MetricName": "Power_License2_Utilization_SMT",
+ "PublicDescription": "Fraction of Core cycles where the core was running with power-delivery for license level 2 (introduced in SKX). This includes high current AVX 512-bit instructions. SMT version; use when SMT is enabled and measuring per logical CPU."
+ },
+ {
"BriefDescription": "Fraction of cycles where both hardware Logical Processors were active",
"MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0",
"MetricGroup": "SMT",
@@ -241,33 +596,45 @@
"MetricName": "Kernel_Utilization"
},
{
+ "BriefDescription": "Cycles Per Instruction for the Operating System (OS) Kernel mode",
+ "MetricExpr": "CPU_CLK_UNHALTED.THREAD_P:k / INST_RETIRED.ANY_P:k",
+ "MetricGroup": "OS",
+ "MetricName": "Kernel_CPI"
+ },
+ {
"BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]",
"MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time",
- "MetricGroup": "HPC;MemoryBW;SoC",
+ "MetricGroup": "HPC;Mem;MemoryBW;SoC",
"MetricName": "DRAM_BW_Use"
},
{
"BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches",
"MetricExpr": "1000000000 * ( cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433@ / cha@event\\=0x35\\,umask\\=0x21\\,config\\=0x40433@ ) / ( cha_0@event\\=0x0@ / duration_time )",
- "MetricGroup": "MemoryLat;SoC",
+ "MetricGroup": "Mem;MemoryLat;SoC",
"MetricName": "MEM_Read_Latency"
},
{
"BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches",
"MetricExpr": "cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433@ / cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433\\,thresh\\=1@",
- "MetricGroup": "MemoryBW;SoC",
+ "MetricGroup": "Mem;MemoryBW;SoC",
"MetricName": "MEM_Parallel_Reads"
},
{
+ "BriefDescription": "Average latency of data read request to external DRAM memory [in nanoseconds]. Accounts for demand loads and L1/L2 data-read prefetches",
+ "MetricExpr": "1000000000 * ( UNC_M_RPQ_OCCUPANCY / UNC_M_RPQ_INSERTS ) / imc_0@event\\=0x0@",
+ "MetricGroup": "Mem;MemoryLat;SoC;Server",
+ "MetricName": "MEM_DRAM_Read_Latency"
+ },
+ {
"BriefDescription": "Average IO (network or disk) Bandwidth Use for Writes [GB / sec]",
"MetricExpr": "( UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3 ) * 4 / 1000000000 / duration_time",
- "MetricGroup": "IoBW;SoC;Server",
+ "MetricGroup": "IoBW;Mem;SoC;Server",
"MetricName": "IO_Write_BW"
},
{
"BriefDescription": "Average IO (network or disk) Bandwidth Use for Reads [GB / sec]",
"MetricExpr": "( UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 ) * 4 / 1000000000 / duration_time",
- "MetricGroup": "IoBW;SoC;Server",
+ "MetricGroup": "IoBW;Mem;SoC;Server",
"MetricName": "IO_Read_BW"
},
{
--- a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
@@ -538,6 +538,18 @@
"Unit": "IIO"
},
{
+ "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0-3",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC2",
+ "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.ALL_PARTS",
+ "FCMask": "0x4",
+ "PerPkg": "1",
+ "PortMask": "0x0f",
+ "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0-3",
+ "UMask": "0x03",
+ "Unit": "IIO"
+ },
+ {
"BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0",
"Counter": "0,1,2,3",
"EventCode": "0xC2",
@@ -586,6 +598,17 @@
"Unit": "IIO"
},
{
+ "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0-3",
+ "Counter": "2,3",
+ "EventCode": "0xD5",
+ "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.ALL_PARTS",
+ "FCMask": "0x04",
+ "PerPkg": "1",
+ "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0-3",
+ "UMask": "0x0f",
+ "Unit": "IIO"
+ },
+ {
"BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0",
"Counter": "2,3",
"EventCode": "0xD5",
From: Yaliang Wang <[email protected]>
[ Upstream commit 2bc5bab9a763d520937e4f3fe8df51c6a1eceb97 ]
pgd page is freed by generic implementation pgd_free() since commit
f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()"),
however, there are scenarios that the system uses more than one page as
the pgd table, in such cases the generic implementation pgd_free() won't
be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and
MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER"
will be set as "1", which will cause allocating two pages as the pgd
table. Well, at the same time, the generic implementation pgd_free()
just free one pgd page, which will result in the memory leak.
The memory leak can be easily detected by executing shell command:
"while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"
Fixes: f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()")
Signed-off-by: Yaliang Wang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/pgalloc.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index c7925d0e9874..867e9c3db76e 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -15,6 +15,7 @@
#define __HAVE_ARCH_PMD_ALLOC_ONE
#define __HAVE_ARCH_PUD_ALLOC_ONE
+#define __HAVE_ARCH_PGD_FREE
#include <asm-generic/pgalloc.h>
static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
@@ -48,6 +49,11 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
extern void pgd_init(unsigned long page);
extern pgd_t *pgd_alloc(struct mm_struct *mm);
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
#define __pte_free_tlb(tlb,pte,address) \
do { \
pgtable_pte_page_dtor(pte); \
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 2343bcdb4747d4f418a4daf2e898b94f86c24a59 ]
In nvkm_acr_hsfw_load_bl(), the return value of kmalloc() is directly
passed to memcpy(), which could lead to undefined behavior on failure
of kmalloc().
Fix this bug by using kmemdup() instead of kmalloc()+memcpy().
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Signed-off-by: Zhou Qingyang <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c b/drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c
index 667fa016496e..a6ea89a5d51a 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c
@@ -142,11 +142,12 @@ nvkm_acr_hsfw_load_bl(struct nvkm_acr *acr, const char *name, int ver,
hsfw->imem_size = desc->code_size;
hsfw->imem_tag = desc->start_tag;
- hsfw->imem = kmalloc(desc->code_size, GFP_KERNEL);
- memcpy(hsfw->imem, data + desc->code_off, desc->code_size);
-
+ hsfw->imem = kmemdup(data + desc->code_off, desc->code_size, GFP_KERNEL);
nvkm_firmware_put(fw);
- return 0;
+ if (!hsfw->imem)
+ return -ENOMEM;
+ else
+ return 0;
}
int
--
2.34.1
From: Arun Easi <[email protected]>
commit c85ab7d9e27a80e48d5b7d7fb2fe2b0fdb2de523 upstream.
At NVMe ELS request time, request structure is DMA mapped and never
unmapped. Fix this by calling the unmap on ELS completion.
Link: https://lore.kernel.org/r/[email protected]
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Arun Easi <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_nvme.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -170,6 +170,18 @@ out:
qla2xxx_rel_qpair_sp(sp->qpair, sp);
}
+static void qla_nvme_ls_unmap(struct srb *sp, struct nvmefc_ls_req *fd)
+{
+ if (sp->flags & SRB_DMA_VALID) {
+ struct srb_iocb *nvme = &sp->u.iocb_cmd;
+ struct qla_hw_data *ha = sp->fcport->vha->hw;
+
+ dma_unmap_single(&ha->pdev->dev, nvme->u.nvme.cmd_dma,
+ fd->rqstlen, DMA_TO_DEVICE);
+ sp->flags &= ~SRB_DMA_VALID;
+ }
+}
+
static void qla_nvme_release_ls_cmd_kref(struct kref *kref)
{
struct srb *sp = container_of(kref, struct srb, cmd_kref);
@@ -186,6 +198,8 @@ static void qla_nvme_release_ls_cmd_kref
spin_unlock_irqrestore(&priv->cmd_lock, flags);
fd = priv->fd;
+
+ qla_nvme_ls_unmap(sp, fd);
fd->done(fd, priv->comp_status);
out:
qla2x00_rel_sp(sp);
@@ -356,6 +370,8 @@ static int qla_nvme_ls_req(struct nvme_f
dma_sync_single_for_device(&ha->pdev->dev, nvme->u.nvme.cmd_dma,
fd->rqstlen, DMA_TO_DEVICE);
+ sp->flags |= SRB_DMA_VALID;
+
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x700e,
@@ -363,6 +379,7 @@ static int qla_nvme_ls_req(struct nvme_f
wake_up(&sp->nvme_ls_waitq);
sp->priv = NULL;
priv->sp = NULL;
+ qla_nvme_ls_unmap(sp, fd);
qla2x00_rel_sp(sp);
return rval;
}
From: Arınç ÜNAL <[email protected]>
[ Upstream commit 6256e18686158fa49e019297f990f1c1817aabf1 ]
Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the
schematics of the device for more information.
LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to
PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to
SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.
Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.
Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC1_V1.0_Schematic.pdf
Tested-by: Sergio Paracuellos <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/mt7621-dts/gbpc1.dts | 40 +++++++++++++---------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts
index b65d71686814..02fd9be5e173 100644
--- a/drivers/staging/mt7621-dts/gbpc1.dts
+++ b/drivers/staging/mt7621-dts/gbpc1.dts
@@ -11,7 +11,8 @@
memory@0 {
device_type = "memory";
- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+ reg = <0x00000000 0x1c000000>,
+ <0x20000000 0x04000000>;
};
chosen {
@@ -37,24 +38,16 @@
gpio-leds {
compatible = "gpio-leds";
- system {
- label = "gb-pc1:green:system";
+ power {
+ label = "green:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
};
- status {
- label = "gb-pc1:green:status";
+ system {
+ label = "green:system";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "gb-pc1:green:lan1";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "gb-pc1:green:lan2";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
};
};
};
@@ -94,9 +87,8 @@
partition@50000 {
label = "firmware";
- reg = <0x50000 0x1FB0000>;
+ reg = <0x50000 0x1fb0000>;
};
-
};
};
@@ -105,9 +97,12 @@
};
&pinctrl {
- state_default: pinctrl0 {
- default_gpio: gpio {
- groups = "wdt", "rgmii2", "uart3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: state-default {
+ gpio-pinmux {
+ groups = "rgmii2", "uart3", "wdt";
function = "gpio";
};
};
@@ -116,12 +111,13 @@
&switch0 {
ports {
port@0 {
+ status = "okay";
label = "ethblack";
- status = "ok";
};
+
port@4 {
+ status = "okay";
label = "ethblue";
- status = "ok";
};
};
};
--
2.34.1
From: Jagan Teki <[email protected]>
[ Upstream commit 3dbc84a595d17f64f14fcea00120d31e33e98880 ]
Existing HPD enablement logic is not compatible with ADV7535
bridge, thus any runtime plug-in of HDMI cable is not working
on these bridge designs.
Unlike other ADV7511 family of bridges, the ADV7535 require
HPD_OVERRIDE bit to set and reset for proper handling of HPD
functionality.
Fix it.
Fixes: 8501fe4b14a3 ("drm: bridge: adv7511: Add support for ADV7535")
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 29 +++++++++++++++-----
2 files changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 05e3abb5a0c9..1b00dfda6e0d 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -169,6 +169,7 @@
#define ADV7511_PACKET_ENABLE_SPARE2 BIT(1)
#define ADV7511_PACKET_ENABLE_SPARE1 BIT(0)
+#define ADV7535_REG_POWER2_HPD_OVERRIDE BIT(6)
#define ADV7511_REG_POWER2_HPD_SRC_MASK 0xc0
#define ADV7511_REG_POWER2_HPD_SRC_BOTH 0x00
#define ADV7511_REG_POWER2_HPD_SRC_HPD 0x40
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 76555ae64e9c..c02f3ec60b04 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -351,11 +351,17 @@ static void __adv7511_power_on(struct adv7511 *adv7511)
* from standby or are enabled. When the HPD goes low the adv7511 is
* reset and the outputs are disabled which might cause the monitor to
* go to standby again. To avoid this we ignore the HPD pin for the
- * first few seconds after enabling the output.
+ * first few seconds after enabling the output. On the other hand
+ * adv7535 require to enable HPD Override bit for proper HPD.
*/
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
- ADV7511_REG_POWER2_HPD_SRC_MASK,
- ADV7511_REG_POWER2_HPD_SRC_NONE);
+ if (adv7511->type == ADV7535)
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+ ADV7535_REG_POWER2_HPD_OVERRIDE,
+ ADV7535_REG_POWER2_HPD_OVERRIDE);
+ else
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+ ADV7511_REG_POWER2_HPD_SRC_MASK,
+ ADV7511_REG_POWER2_HPD_SRC_NONE);
}
static void adv7511_power_on(struct adv7511 *adv7511)
@@ -375,6 +381,10 @@ static void adv7511_power_on(struct adv7511 *adv7511)
static void __adv7511_power_off(struct adv7511 *adv7511)
{
/* TODO: setup additional power down modes */
+ if (adv7511->type == ADV7535)
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+ ADV7535_REG_POWER2_HPD_OVERRIDE, 0);
+
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
ADV7511_POWER_POWER_DOWN,
ADV7511_POWER_POWER_DOWN);
@@ -672,9 +682,14 @@ adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
status = connector_status_disconnected;
} else {
/* Renable HPD sensing */
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
- ADV7511_REG_POWER2_HPD_SRC_MASK,
- ADV7511_REG_POWER2_HPD_SRC_BOTH);
+ if (adv7511->type == ADV7535)
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+ ADV7535_REG_POWER2_HPD_OVERRIDE,
+ ADV7535_REG_POWER2_HPD_OVERRIDE);
+ else
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+ ADV7511_REG_POWER2_HPD_SRC_MASK,
+ ADV7511_REG_POWER2_HPD_SRC_BOTH);
}
adv7511->status = status;
--
2.34.1
From: Peter Rosin <[email protected]>
[ Upstream commit 1a22aabf20adf89cb216f566913196128766f25b ]
Attempting to rollback the activation of the current master when
the current master has not been activated is bad. priv->cur_chan
and priv->cur_adap are both still zeroed out and the rollback
may result in attempts to revert an of changeset that has not been
applied and do result in calls to both del and put the zeroed out
i2c_adapter. Maybe it crashes, or whatever, but it's bad in any
case.
Fixes: e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'")
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/muxes/i2c-demux-pinctrl.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 5365199a31f4..f7a7405d4350 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -261,7 +261,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
err = device_create_file(&pdev->dev, &dev_attr_available_masters);
if (err)
- goto err_rollback;
+ goto err_rollback_activation;
err = device_create_file(&pdev->dev, &dev_attr_current_master);
if (err)
@@ -271,8 +271,9 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
err_rollback_available:
device_remove_file(&pdev->dev, &dev_attr_available_masters);
-err_rollback:
+err_rollback_activation:
i2c_demux_deactivate_master(priv);
+err_rollback:
for (j = 0; j < i; j++) {
of_node_put(priv->chan[j].parent_np);
of_changeset_destroy(&priv->chan[j].chgset);
--
2.34.1
From: Xiao Yang <[email protected]>
[ Upstream commit b1377cc37f6bebd57ce8747b7e16163a475af295 ]
It's wrong to check the last packet by RXE_COMP_MASK because the flag is
to indicate if responder needs to generate a completion.
Fixes: 9fcd67d1772c ("IB/rxe: increment msn only when completing a request")
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Xiao Yang <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_resp.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c
index 5501227ddc65..8ed172ab0beb 100644
--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -830,6 +830,10 @@ static enum resp_states execute(struct rxe_qp *qp, struct rxe_pkt_info *pkt)
return RESPST_ERR_INVALIDATE_RKEY;
}
+ if (pkt->mask & RXE_END_MASK)
+ /* We successfully processed this new request. */
+ qp->resp.msn++;
+
/* next expected psn, read handles this separately */
qp->resp.psn = (pkt->psn + 1) & BTH_PSN_MASK;
qp->resp.ack_psn = qp->resp.psn;
@@ -837,11 +841,9 @@ static enum resp_states execute(struct rxe_qp *qp, struct rxe_pkt_info *pkt)
qp->resp.opcode = pkt->opcode;
qp->resp.status = IB_WC_SUCCESS;
- if (pkt->mask & RXE_COMP_MASK) {
- /* We successfully processed this new request. */
- qp->resp.msn++;
+ if (pkt->mask & RXE_COMP_MASK)
return RESPST_COMPLETE;
- } else if (qp_type(qp) == IB_QPT_RC)
+ else if (qp_type(qp) == IB_QPT_RC)
return RESPST_ACKNOWLEDGE;
else
return RESPST_CLEANUP;
--
2.34.1
From: Rob Herring <[email protected]>
[ Upstream commit 37cbd3c522869247ed4525b5042ff4c6a276c813 ]
A label reference without brackets is a path string, not a phandle as
intended. Add the missing brackets.
Fixes: a5002c41c383 ("arm64: dts: rockchip: add WiFi module support for Firefly-RK3399")
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c4dd2a6b4836..f81ce3240342 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -770,8 +770,8 @@
sd-uhs-sdr104;
/* Power supply */
- vqmmc-supply = &vcc1v8_s3; /* IO line */
- vmmc-supply = &vcc_sdio; /* card's power */
+ vqmmc-supply = <&vcc1v8_s3>; /* IO line */
+ vmmc-supply = <&vcc_sdio>; /* card's power */
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
From: Felix Maurer <[email protected]>
[ Upstream commit d23a8720327d33616f584d76c80824bfa4699be6 ]
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to
time. The failure occured when an IPv4 ping through the IPv6 GRE
encapsulation did not receive a reply within the timeout. The IPv4 ping
and the IPv6 ping in the test used different timeouts (1 sec for IPv4
and 6 sec for IPv6), probably taking into account that IPv6 might need
longer to successfully complete. However, when IPv4 pings (with the
short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6
apply.
The actual reason for the long delays with IPv6 was that the IPv6
neighbor discovery sometimes did not complete in time. This was caused
by the outgoing interface only having a tentative link local address,
i.e., not having completed DAD for that lladdr. The ND was successfully
retried after 1 sec but that was too late for the ping timeout.
The IPv6 addresses for the test were already added with nodad. However,
for the lladdrs, DAD was still performed. We now disable DAD in the test
netns completely and just assume that the two lladdrs on each veth pair
do not collide. This removes all the delays for IPv6 traffic in the
test.
Without the delays, we can now also reduce the delay of the IPv6 ping to
1 sec. This makes the whole test complete faster because we don't need
to wait for the excessive timeout for each IPv6 ping that is supposed
to fail.
Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Felix Maurer <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
index b497bb85b667..6c69c42b1d60 100755
--- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
+++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
@@ -120,6 +120,14 @@ setup()
ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0
ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0
+ # disable IPv6 DAD because it sometimes takes too long and fails tests
+ ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0
+ ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0
+ ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
ip link add veth1 type veth peer name veth2
ip link add veth3 type veth peer name veth4
ip link add veth5 type veth peer name veth6
@@ -289,7 +297,7 @@ test_ping()
ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null
RET=$?
elif [ "${PROTO}" == "IPv6" ] ; then
- ip netns exec ${NS1} ping6 -c 1 -W 6 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
+ ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
RET=$?
else
echo " test_ping: unknown PROTO: ${PROTO}"
--
2.34.1
From: Aswath Govindraju <[email protected]>
[ Upstream commit 3b7340f1c89cc488e4df0b033bf7ae502ebbf5b2 ]
The MMCSD IPs used in AM64 are the same as the ones used in J721E.
Therefore, fix this by using the driver data from J721E for AM64 too, for
both 8 and 4 bit instances.
Fixes: 754b7f2f7d2a ("mmc: sdhci_am654: Add Support for TI's AM64 SoC")
Signed-off-by: Aswath Govindraju <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci_am654.c | 24 ++----------------------
1 file changed, 2 insertions(+), 22 deletions(-)
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index f654afbe8e83..b4891bb26648 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -514,26 +514,6 @@ static const struct sdhci_am654_driver_data sdhci_j721e_4bit_drvdata = {
.flags = IOMUX_PRESENT,
};
-static const struct sdhci_pltfm_data sdhci_am64_8bit_pdata = {
- .ops = &sdhci_j721e_8bit_ops,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
-};
-
-static const struct sdhci_am654_driver_data sdhci_am64_8bit_drvdata = {
- .pdata = &sdhci_am64_8bit_pdata,
- .flags = DLL_PRESENT | DLL_CALIB,
-};
-
-static const struct sdhci_pltfm_data sdhci_am64_4bit_pdata = {
- .ops = &sdhci_j721e_4bit_ops,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
-};
-
-static const struct sdhci_am654_driver_data sdhci_am64_4bit_drvdata = {
- .pdata = &sdhci_am64_4bit_pdata,
- .flags = IOMUX_PRESENT,
-};
-
static const struct soc_device_attribute sdhci_am654_devices[] = {
{ .family = "AM65X",
.revision = "SR1.0",
@@ -759,11 +739,11 @@ static const struct of_device_id sdhci_am654_of_match[] = {
},
{
.compatible = "ti,am64-sdhci-8bit",
- .data = &sdhci_am64_8bit_drvdata,
+ .data = &sdhci_j721e_8bit_drvdata,
},
{
.compatible = "ti,am64-sdhci-4bit",
- .data = &sdhci_am64_4bit_drvdata,
+ .data = &sdhci_j721e_4bit_drvdata,
},
{ /* sentinel */ }
};
--
2.34.1
From: Vijendar Mukunda <[email protected]>
[ Upstream commit 83b713619ee1b15e09eae11a92a7f3305534223d ]
The previous condition is used to cross check only the active
stream status for I2S HS instance playback and capture use cases.
Modified logic to invoke sequence for two i2s controller instances.
This also fixes warnings reported by kernel robot:
"warning: variable 'frmt_val' set but not used"
"warning: variable 'reg_val' set but not used"
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/amd/vangogh/acp5x-pcm-dma.c | 66 +++++++++++++--------------
1 file changed, 33 insertions(+), 33 deletions(-)
diff --git a/sound/soc/amd/vangogh/acp5x-pcm-dma.c b/sound/soc/amd/vangogh/acp5x-pcm-dma.c
index 6abcc2133a2c..bfca4cf423cf 100644
--- a/sound/soc/amd/vangogh/acp5x-pcm-dma.c
+++ b/sound/soc/amd/vangogh/acp5x-pcm-dma.c
@@ -426,51 +426,51 @@ static int acp5x_audio_remove(struct platform_device *pdev)
static int __maybe_unused acp5x_pcm_resume(struct device *dev)
{
struct i2s_dev_data *adata;
- u32 val, reg_val, frmt_val;
+ struct i2s_stream_instance *rtd;
+ u32 val;
- reg_val = 0;
- frmt_val = 0;
adata = dev_get_drvdata(dev);
if (adata->play_stream && adata->play_stream->runtime) {
- struct i2s_stream_instance *rtd =
- adata->play_stream->runtime->private_data;
+ rtd = adata->play_stream->runtime->private_data;
config_acp5x_dma(rtd, SNDRV_PCM_STREAM_PLAYBACK);
- switch (rtd->i2s_instance) {
- case I2S_HS_INSTANCE:
- reg_val = ACP_HSTDM_ITER;
- frmt_val = ACP_HSTDM_TXFRMT;
- break;
- case I2S_SP_INSTANCE:
- default:
- reg_val = ACP_I2STDM_ITER;
- frmt_val = ACP_I2STDM_TXFRMT;
+ acp_writel((rtd->xfer_resolution << 3), rtd->acp5x_base + ACP_HSTDM_ITER);
+ if (adata->tdm_mode == TDM_ENABLE) {
+ acp_writel(adata->tdm_fmt, adata->acp5x_base + ACP_HSTDM_TXFRMT);
+ val = acp_readl(adata->acp5x_base + ACP_HSTDM_ITER);
+ acp_writel(val | 0x2, adata->acp5x_base + ACP_HSTDM_ITER);
+ }
+ }
+ if (adata->i2ssp_play_stream && adata->i2ssp_play_stream->runtime) {
+ rtd = adata->i2ssp_play_stream->runtime->private_data;
+ config_acp5x_dma(rtd, SNDRV_PCM_STREAM_PLAYBACK);
+ acp_writel((rtd->xfer_resolution << 3), rtd->acp5x_base + ACP_I2STDM_ITER);
+ if (adata->tdm_mode == TDM_ENABLE) {
+ acp_writel(adata->tdm_fmt, adata->acp5x_base + ACP_I2STDM_TXFRMT);
+ val = acp_readl(adata->acp5x_base + ACP_I2STDM_ITER);
+ acp_writel(val | 0x2, adata->acp5x_base + ACP_I2STDM_ITER);
}
- acp_writel((rtd->xfer_resolution << 3),
- rtd->acp5x_base + reg_val);
}
if (adata->capture_stream && adata->capture_stream->runtime) {
- struct i2s_stream_instance *rtd =
- adata->capture_stream->runtime->private_data;
+ rtd = adata->capture_stream->runtime->private_data;
config_acp5x_dma(rtd, SNDRV_PCM_STREAM_CAPTURE);
- switch (rtd->i2s_instance) {
- case I2S_HS_INSTANCE:
- reg_val = ACP_HSTDM_IRER;
- frmt_val = ACP_HSTDM_RXFRMT;
- break;
- case I2S_SP_INSTANCE:
- default:
- reg_val = ACP_I2STDM_IRER;
- frmt_val = ACP_I2STDM_RXFRMT;
+ acp_writel((rtd->xfer_resolution << 3), rtd->acp5x_base + ACP_HSTDM_IRER);
+ if (adata->tdm_mode == TDM_ENABLE) {
+ acp_writel(adata->tdm_fmt, adata->acp5x_base + ACP_HSTDM_RXFRMT);
+ val = acp_readl(adata->acp5x_base + ACP_HSTDM_IRER);
+ acp_writel(val | 0x2, adata->acp5x_base + ACP_HSTDM_IRER);
}
- acp_writel((rtd->xfer_resolution << 3),
- rtd->acp5x_base + reg_val);
}
- if (adata->tdm_mode == TDM_ENABLE) {
- acp_writel(adata->tdm_fmt, adata->acp5x_base + frmt_val);
- val = acp_readl(adata->acp5x_base + reg_val);
- acp_writel(val | 0x2, adata->acp5x_base + reg_val);
+ if (adata->i2ssp_capture_stream && adata->i2ssp_capture_stream->runtime) {
+ rtd = adata->i2ssp_capture_stream->runtime->private_data;
+ config_acp5x_dma(rtd, SNDRV_PCM_STREAM_CAPTURE);
+ acp_writel((rtd->xfer_resolution << 3), rtd->acp5x_base + ACP_I2STDM_IRER);
+ if (adata->tdm_mode == TDM_ENABLE) {
+ acp_writel(adata->tdm_fmt, adata->acp5x_base + ACP_I2STDM_RXFRMT);
+ val = acp_readl(adata->acp5x_base + ACP_I2STDM_IRER);
+ acp_writel(val | 0x2, adata->acp5x_base + ACP_I2STDM_IRER);
+ }
}
acp_writel(1, adata->acp5x_base + ACP_EXTERNAL_INTR_ENB);
return 0;
--
2.34.1
From: Florian Fainelli <[email protected]>
[ Upstream commit bf8bfc4336f7a34e48b3bbd19b1542bf085bdc3d ]
A Broadcom AC201 PHY (same entry as 5241) would be flagged by the
Broadcom UniMAC MDIO controller as not completing the turn around
properly since the PHY expects 65 MDC clock cycles to complete a write
cycle, and the MDIO controller was only sending 64 MDC clock cycles as
determined by looking at a scope shot.
This would make the subsequent read fail with the UniMAC MDIO controller
command field having MDIO_READ_FAIL set and we would abort the
brcm_fet_config_init() function and thus not probe the PHY at all.
After issuing a software reset, wait for at least 1ms which is well
above the 1us reset delay advertised by the datasheet and issue a dummy
read to let the PHY turn around the line properly. This read
specifically ignores -EIO which would be returned by MDIO controllers
checking for the line being turned around.
If we have a genuine reaad failure, the next read of the interrupt
status register would pick it up anyway.
Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support")
Signed-off-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/broadcom.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index db26ff8ce7db..b330efb98209 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -11,6 +11,7 @@
*/
#include "bcm-phy-lib.h"
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/brcmphy.h>
@@ -553,6 +554,26 @@ static int brcm_fet_config_init(struct phy_device *phydev)
if (err < 0)
return err;
+ /* The datasheet indicates the PHY needs up to 1us to complete a reset,
+ * build some slack here.
+ */
+ usleep_range(1000, 2000);
+
+ /* The PHY requires 65 MDC clock cycles to complete a write operation
+ * and turnaround the line properly.
+ *
+ * We ignore -EIO here as the MDIO controller (e.g.: mdio-bcm-unimac)
+ * may flag the lack of turn-around as a read failure. This is
+ * particularly true with this combination since the MDIO controller
+ * only used 64 MDC cycles. This is not a critical failure in this
+ * specific case and it has no functional impact otherwise, so we let
+ * that one go through. If there is a genuine bus error, the next read
+ * of MII_BRCM_FET_INTREG will error out.
+ */
+ err = phy_read(phydev, MII_BMCR);
+ if (err < 0 && err != -EIO)
+ return err;
+
reg = phy_read(phydev, MII_BRCM_FET_INTREG);
if (reg < 0)
return reg;
--
2.34.1
From: Quinn Tran <[email protected]>
commit c13ce47c64ea8f14e77eecb40d1e7c2ac667f898 upstream.
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS
pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This
is not consistent. Delete the session to restart the connection where ELS
pass through PLOGI would be used consistently.
Link: https://lore.kernel.org/r/[email protected]
Fixes: c76ae845ea83 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_iocb.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2943,6 +2943,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
set_bit(ISP_ABORT_NEEDED,
&vha->dpc_flags);
qla2xxx_wake_dpc(vha);
+ break;
}
fallthrough;
default:
@@ -2952,9 +2953,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
fw_status[0], fw_status[1], fw_status[2]);
fcport->flags &= ~FCF_ASYNC_SENT;
- qla2x00_set_fcport_disc_state(fcport,
- DSC_LOGIN_FAILED);
- set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+ qlt_schedule_sess_for_deletion(fcport);
break;
}
break;
@@ -2966,8 +2965,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
fw_status[0], fw_status[1], fw_status[2]);
sp->fcport->flags &= ~FCF_ASYNC_SENT;
- qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_FAILED);
- set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+ qlt_schedule_sess_for_deletion(fcport);
break;
}
From: Corinna Vinschen <[email protected]>
[ Upstream commit e62ad74aa534404b3ee7e250b114a3536ac56987 ]
On changing the RX ring parameters igb uses a hack to avoid a warning
when calling xdp_rxq_info_reg via igb_setup_rx_resources. It just
clears the struct xdp_rxq_info content.
Instead, change this to unregister if we're already registered. Align
code to the igc code.
Fixes: 9cbc948b5a20c ("igb: add XDP support")
Signed-off-by: Corinna Vinschen <[email protected]>
Acked-by: Vinicius Costa Gomes <[email protected]>
Tested-by: Sandeep Penigalapati <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/igb_ethtool.c | 4 ----
drivers/net/ethernet/intel/igb/igb_main.c | 19 +++++++++++++------
2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index fb1029352c3e..3cbb5a89b336 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -961,10 +961,6 @@ static int igb_set_ringparam(struct net_device *netdev,
memcpy(&temp_ring[i], adapter->rx_ring[i],
sizeof(struct igb_ring));
- /* Clear copied XDP RX-queue info */
- memset(&temp_ring[i].xdp_rxq, 0,
- sizeof(temp_ring[i].xdp_rxq));
-
temp_ring[i].count = new_rx_count;
err = igb_setup_rx_resources(&temp_ring[i]);
if (err) {
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 82a712f77cb3..bf8ef81f6c0e 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4345,7 +4345,18 @@ int igb_setup_rx_resources(struct igb_ring *rx_ring)
{
struct igb_adapter *adapter = netdev_priv(rx_ring->netdev);
struct device *dev = rx_ring->dev;
- int size;
+ int size, res;
+
+ /* XDP RX-queue info */
+ if (xdp_rxq_info_is_reg(&rx_ring->xdp_rxq))
+ xdp_rxq_info_unreg(&rx_ring->xdp_rxq);
+ res = xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev,
+ rx_ring->queue_index, 0);
+ if (res < 0) {
+ dev_err(dev, "Failed to register xdp_rxq index %u\n",
+ rx_ring->queue_index);
+ return res;
+ }
size = sizeof(struct igb_rx_buffer) * rx_ring->count;
@@ -4368,14 +4379,10 @@ int igb_setup_rx_resources(struct igb_ring *rx_ring)
rx_ring->xdp_prog = adapter->xdp_prog;
- /* XDP RX-queue info */
- if (xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev,
- rx_ring->queue_index, 0) < 0)
- goto err;
-
return 0;
err:
+ xdp_rxq_info_unreg(&rx_ring->xdp_rxq);
vfree(rx_ring->rx_buffer_info);
rx_ring->rx_buffer_info = NULL;
dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
--
2.34.1
From: Alexey Khoroshilov <[email protected]>
[ Upstream commit cb8fac6d2727f79f211e745b16c9abbf4d8be652 ]
[You don't often get email from [email protected]. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
Overflow check in not needed anymore after we switch to kmalloc_array().
Signed-off-by: Alexey Khoroshilov <[email protected]>
Fixes: a4f743a6bb20 ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/callback_xdr.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index ce3d1d5b1291..ea17085ef884 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -271,10 +271,6 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
n = ntohl(*p++);
if (n == 0)
goto out;
- if (n > ULONG_MAX / sizeof(*args->devs)) {
- status = htonl(NFS4ERR_BADXDR);
- goto out;
- }
args->devs = kmalloc_array(n, sizeof(*args->devs), GFP_KERNEL);
if (!args->devs) {
--
2.34.1
From: Kai Ye <[email protected]>
[ Upstream commit f8a2652826444d13181061840b96a5d975d5b6c6 ]
It is not need to enable sm4 extra mode in at HW V3. Here is fix it.
Signed-off-by: Kai Ye <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/hisilicon/sec2/sec_main.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 90551bf38b52..03d239cfdf8c 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -443,9 +443,11 @@ static int sec_engine_init(struct hisi_qm *qm)
writel(SEC_SAA_ENABLE, qm->io_base + SEC_SAA_EN_REG);
- /* Enable sm4 extra mode, as ctr/ecb */
- writel_relaxed(SEC_BD_ERR_CHK_EN0,
- qm->io_base + SEC_BD_ERR_CHK_EN_REG0);
+ /* HW V2 enable sm4 extra mode, as ctr/ecb */
+ if (qm->ver < QM_HW_V3)
+ writel_relaxed(SEC_BD_ERR_CHK_EN0,
+ qm->io_base + SEC_BD_ERR_CHK_EN_REG0);
+
/* Enable sm4 xts mode multiple iv */
writel_relaxed(SEC_BD_ERR_CHK_EN1,
qm->io_base + SEC_BD_ERR_CHK_EN_REG1);
--
2.34.1
From: Kai-Heng Feng <[email protected]>
commit 7499b529d97f752124fa62fefa1d6d44b371215a upstream.
Commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") doesn't
use pm_runtime_{get,put}() helpers when it should, so the RPM refcount
keeps at zero, hence its parent driver, rtsx_pci, has to do lots of
weird tricks to keep it from runtime suspending.
So use those helpers at right places to properly manage runtime PM.
Fixes: 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM")
Cc: Ricky WU <[email protected]>
Tested-by: Ricky WU <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 44 ++++++++++++++++++++++++++++----------
1 file changed, 33 insertions(+), 11 deletions(-)
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -806,6 +806,7 @@ static void sd_request(struct work_struc
struct mmc_request *mrq = host->mrq;
struct mmc_command *cmd = mrq->cmd;
struct mmc_data *data = mrq->data;
+ struct device *dev = &host->pdev->dev;
unsigned int data_size = 0;
int err;
@@ -822,6 +823,7 @@ static void sd_request(struct work_struc
}
mutex_lock(&pcr->pcr_mutex);
+ pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -858,6 +860,8 @@ static void sd_request(struct work_struc
data->bytes_xfered = data->blocks * data->blksz;
}
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
finish:
@@ -1080,6 +1084,7 @@ static void sdmmc_set_ios(struct mmc_hos
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
+ struct device *dev = &host->pdev->dev;
if (host->eject)
return;
@@ -1088,6 +1093,7 @@ static void sdmmc_set_ios(struct mmc_hos
return;
mutex_lock(&pcr->pcr_mutex);
+ pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1121,6 +1127,8 @@ static void sdmmc_set_ios(struct mmc_hos
rtsx_pci_switch_clock(pcr, ios->clock, host->ssc_depth,
host->initial_mode, host->double_clk, host->vpclk);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
}
@@ -1128,6 +1136,7 @@ static int sdmmc_get_ro(struct mmc_host
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
+ struct device *dev = &host->pdev->dev;
int ro = 0;
u32 val;
@@ -1135,6 +1144,7 @@ static int sdmmc_get_ro(struct mmc_host
return -ENOMEDIUM;
mutex_lock(&pcr->pcr_mutex);
+ pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1144,6 +1154,8 @@ static int sdmmc_get_ro(struct mmc_host
if (val & SD_WRITE_PROTECT)
ro = 1;
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
return ro;
@@ -1153,6 +1165,7 @@ static int sdmmc_get_cd(struct mmc_host
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
+ struct device *dev = &host->pdev->dev;
int cd = 0;
u32 val;
@@ -1160,6 +1173,7 @@ static int sdmmc_get_cd(struct mmc_host
return cd;
mutex_lock(&pcr->pcr_mutex);
+ pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1169,6 +1183,8 @@ static int sdmmc_get_cd(struct mmc_host
if (val & SD_EXIST)
cd = 1;
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
return cd;
@@ -1251,6 +1267,7 @@ static int sdmmc_switch_voltage(struct m
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
+ struct device *dev = &host->pdev->dev;
int err = 0;
u8 voltage;
@@ -1265,6 +1282,7 @@ static int sdmmc_switch_voltage(struct m
return err;
mutex_lock(&pcr->pcr_mutex);
+ pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1294,6 +1312,8 @@ out:
err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
return err;
@@ -1303,6 +1323,7 @@ static int sdmmc_execute_tuning(struct m
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
+ struct device *dev = &host->pdev->dev;
int err = 0;
if (host->eject)
@@ -1313,6 +1334,7 @@ static int sdmmc_execute_tuning(struct m
return err;
mutex_lock(&pcr->pcr_mutex);
+ pm_runtime_get_sync(dev);
rtsx_pci_start_run(pcr);
@@ -1345,6 +1367,8 @@ static int sdmmc_execute_tuning(struct m
err = sd_change_phase(host, DDR50_RX_PHASE(pcr), true);
out:
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
mutex_unlock(&pcr->pcr_mutex);
return err;
@@ -1495,12 +1519,12 @@ static int rtsx_pci_sdmmc_drv_probe(stru
realtek_init_host(host);
- if (pcr->rtd3_en) {
- pm_runtime_set_autosuspend_delay(&pdev->dev, 5000);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
-
+ pm_runtime_no_callbacks(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 200);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_use_autosuspend(&pdev->dev);
mmc_add_host(mmc);
@@ -1521,11 +1545,6 @@ static int rtsx_pci_sdmmc_drv_remove(str
pcr->slots[RTSX_SD_CARD].card_event = NULL;
mmc = host->mmc;
- if (pcr->rtd3_en) {
- pm_runtime_dont_use_autosuspend(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- }
-
cancel_work_sync(&host->work);
mutex_lock(&host->host_mutex);
@@ -1548,6 +1567,9 @@ static int rtsx_pci_sdmmc_drv_remove(str
flush_work(&host->work);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
mmc_free_host(mmc);
dev_dbg(&(pdev->dev),
From: Janusz Krzysztofik <[email protected]>
commit c74052646496ffe0bc606152e6b9653137020cbf upstream.
Try requests are now only supported by format processing pad operations
implemented by the driver. The driver selection API operations
currently respond to them with -EINVAL. While that is correct, it
constraints video device drivers to not use subdevice cropping at all
while processing user requested active frame size, otherwise their set
try format results might differ from active. As a consequence, we
can't fix set format pad operation as not to touch crop rectangle since
that would affect users not being able to set arbitrary frame sizes.
Moreover, without a working set try selection support we are not able
to use pad config crop rectangle as a reference while processing set
try format requests.
Implement missing try selection support. Moreover, as it will be now
possible to maintain the pad config crop rectangle via selection API,
start using it instead of the active one as a reference while
processing set try format requests.
is_unscaled_ok() helper, now also called from set selection operation,
has been just moved up in the source file to avoid a prototype, with no
functional changes.
[Sakari Ailus: Rebase on subdev state patches]
Fixes: 717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/ov6650.c | 54 +++++++++++++++++++++++++++++++++++----------
1 file changed, 43 insertions(+), 11 deletions(-)
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -472,9 +472,16 @@ static int ov6650_get_selection(struct v
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov6650 *priv = to_ov6650(client);
+ struct v4l2_rect *rect;
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
+ if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
+ /* pre-select try crop rectangle */
+ rect = &sd_state->pads->try_crop;
+
+ } else {
+ /* pre-select active crop rectangle */
+ rect = &priv->rect;
+ }
switch (sel->target) {
case V4L2_SEL_TGT_CROP_BOUNDS:
@@ -483,14 +490,22 @@ static int ov6650_get_selection(struct v
sel->r.width = W_CIF;
sel->r.height = H_CIF;
return 0;
+
case V4L2_SEL_TGT_CROP:
- sel->r = priv->rect;
+ /* use selected crop rectangle */
+ sel->r = *rect;
return 0;
+
default:
return -EINVAL;
}
}
+static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
+{
+ return width > rect->width >> 1 || height > rect->height >> 1;
+}
+
static void ov6650_bind_align_crop_rectangle(struct v4l2_rect *rect)
{
v4l_bound_align_image(&rect->width, 2, W_CIF, 1,
@@ -510,12 +525,30 @@ static int ov6650_set_selection(struct v
struct ov6650 *priv = to_ov6650(client);
int ret;
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
- sel->target != V4L2_SEL_TGT_CROP)
+ if (sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
ov6650_bind_align_crop_rectangle(&sel->r);
+ if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
+ struct v4l2_rect *crop = &sd_state->pads->try_crop;
+ struct v4l2_mbus_framefmt *mf = &sd_state->pads->try_fmt;
+ /* detect current pad config scaling factor */
+ bool half_scale = !is_unscaled_ok(mf->width, mf->height, crop);
+
+ /* store new crop rectangle */
+ *crop = sel->r;
+
+ /* adjust frame size */
+ mf->width = crop->width >> half_scale;
+ mf->height = crop->height >> half_scale;
+
+ return 0;
+ }
+
+ /* V4L2_SUBDEV_FORMAT_ACTIVE */
+
+ /* apply new crop rectangle */
ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
if (!ret) {
priv->rect.width += priv->rect.left - sel->r.left;
@@ -567,11 +600,6 @@ static int ov6650_get_fmt(struct v4l2_su
return 0;
}
-static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
-{
- return width > rect->width >> 1 || height > rect->height >> 1;
-}
-
#define to_clkrc(div) ((div) - 1)
/* set the format we will capture in */
@@ -692,7 +720,11 @@ static int ov6650_set_fmt(struct v4l2_su
break;
}
- *crop = priv->rect;
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+ *crop = sd_state->pads->try_crop;
+ else
+ *crop = priv->rect;
+
half_scale = !is_unscaled_ok(mf->width, mf->height, crop);
/* adjust new crop rectangle position against its current center */
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 82ee41b85cef16b4be1f4732650012d9baaedddd ]
When a task is being retried, due to an NFS error, if the assigned
transport has been put offline and the task is relocatable pick a new
transport.
Fixes: 6f081693e7b2b ("sunrpc: remove an offlined xprt using sysfs")
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/clnt.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 5da1d7e8468a..5d5627bf3b18 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1065,7 +1065,9 @@ rpc_task_get_next_xprt(struct rpc_clnt *clnt)
static
void rpc_task_set_transport(struct rpc_task *task, struct rpc_clnt *clnt)
{
- if (task->tk_xprt)
+ if (task->tk_xprt &&
+ !(test_bit(XPRT_OFFLINE, &task->tk_xprt->state) &&
+ (task->tk_flags & RPC_TASK_MOVEABLE)))
return;
if (task->tk_flags & RPC_TASK_NO_ROUND_ROBIN)
task->tk_xprt = rpc_task_get_first_xprt(clnt);
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit 8f405221a73a53234486c185d8ef647377a53cc6 ]
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ixgbe_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Tested-by: Sandeep Penigalapati <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
index 7c17932a5e4e..36f43dc3a55e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
@@ -208,13 +208,11 @@ static struct sk_buff *ixgbe_construct_skb_zc(struct ixgbe_ring *rx_ring,
struct sk_buff *skb;
/* allocate a skb to store the frags */
- skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
- xdp->data_end - xdp->data_hard_start,
+ skb = __napi_alloc_skb(&rx_ring->q_vector->napi, datasize,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
return NULL;
- skb_reserve(skb, xdp->data - xdp->data_hard_start);
memcpy(__skb_put(skb, datasize), xdp->data, datasize);
if (metasize)
skb_metadata_set(skb, metasize);
--
2.34.1
From: Xu Kuohai <[email protected]>
[ Upstream commit 4226961b0019b2e1612029e8950a9e911affc995 ]
Currently if a declaration appears in the BTF before the definition, the
definition is dumped as a conflicting name, e.g.:
$ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
[81287] FWD 'unix_sock' fwd_kind=struct
[89336] STRUCT 'unix_sock' size=1024 vlen=14
$ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
struct unix_sock;
struct unix_sock___2 { <--- conflict, the "___2" is unexpected
struct unix_sock___2 *unix_sk;
This causes a compilation error if the dump output is used as a header file.
Fix it by skipping declaration when counting duplicated type names.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Xu Kuohai <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf_dump.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 463447a071d6..841cc68e3f42 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -1481,6 +1481,11 @@ static const char *btf_dump_resolve_name(struct btf_dump *d, __u32 id,
if (s->name_resolved)
return *cached_name ? *cached_name : orig_name;
+ if (btf_is_fwd(t) || (btf_is_enum(t) && btf_vlen(t) == 0)) {
+ s->name_resolved = 1;
+ return orig_name;
+ }
+
dup_cnt = btf_dump_name_dups(d, name_map, orig_name);
if (dup_cnt > 1) {
const size_t max_len = 256;
--
2.34.1
From: Maxim Kiselev <[email protected]>
[ Upstream commit 5ebb74749202a25da4b3cc2eb15470225a05527c ]
On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.
This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.
This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.
Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <[email protected]>
Reviewed-by: Maxim Kochetkov <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 30 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 +++---
2 files changed, 34 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
new file mode 100644
index 000000000000..73f8c998c64d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * T1040RDB-REV-A Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ */
+
+#include "t1040rdb.dts"
+
+/ {
+ model = "fsl,T1040RDB-REV-A";
+ compatible = "fsl,T1040RDB-REV-A";
+};
+
+&seville_port0 {
+ label = "ETH5";
+};
+
+&seville_port2 {
+ label = "ETH7";
+};
+
+&seville_port4 {
+ label = "ETH9";
+};
+
+&seville_port6 {
+ label = "ETH11";
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index af0c8a6f5613..b6733e7e6580 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -119,7 +119,7 @@
managed = "in-band-status";
phy-handle = <&phy_qsgmii_0>;
phy-mode = "qsgmii";
- label = "ETH5";
+ label = "ETH3";
status = "okay";
};
@@ -135,7 +135,7 @@
managed = "in-band-status";
phy-handle = <&phy_qsgmii_2>;
phy-mode = "qsgmii";
- label = "ETH7";
+ label = "ETH5";
status = "okay";
};
@@ -151,7 +151,7 @@
managed = "in-band-status";
phy-handle = <&phy_qsgmii_4>;
phy-mode = "qsgmii";
- label = "ETH9";
+ label = "ETH7";
status = "okay";
};
@@ -167,7 +167,7 @@
managed = "in-band-status";
phy-handle = <&phy_qsgmii_6>;
phy-mode = "qsgmii";
- label = "ETH11";
+ label = "ETH9";
status = "okay";
};
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit b07cabb8361dc692522538205552b1b9dab134be ]
The rts51x_read_mem() function should return negative error codes.
Currently if the kmalloc() fails it returns USB_STOR_TRANSPORT_ERROR (3)
which is treated as success by the callers.
Fixes: 065e60964e29 ("ums_realtek: do not use stack memory for DMA")
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20220304073504.GA26464@kili
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/storage/realtek_cr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 3789698d9d3c..0c423916d7bf 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -365,7 +365,7 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
buf = kmalloc(len, GFP_NOIO);
if (buf == NULL)
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
--
2.34.1
From: Jonathan Cameron <[email protected]>
[ Upstream commit f281e4ddbbc0b60f061bc18a2834e9363ba85f9f ]
The bit reversal was wrong for bits 1 and 3 of the 5 bits.
Result is driver failure to probe if you have more than 2 daisy-chained
devices. Discovered via QEMU based device emulation.
Fixes tag is for when this moved from a macro to a function, but it
was broken before that.
Signed-off-by: Jonathan Cameron <[email protected]>
Fixes: 065a7c0b1fec ("Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse")
Reviewed-by: Marcelo Schmitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/iio/adc/ad7280a.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index fef0055b8990..20183b2ea127 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -107,9 +107,9 @@
static unsigned int ad7280a_devaddr(unsigned int addr)
{
return ((addr & 0x1) << 4) |
- ((addr & 0x2) << 3) |
+ ((addr & 0x2) << 2) |
(addr & 0x4) |
- ((addr & 0x8) >> 3) |
+ ((addr & 0x8) >> 2) |
((addr & 0x10) >> 4);
}
--
2.34.1
From: Dave Jiang <[email protected]>
[ Upstream commit 79c4c3db7d86b9bec94562275efc82e58f3d0132 ]
DSA spec 1.2 has moved the GENCFG register under the GENCAP configuration
support with respect to writability. Add check in driver before writing to
GENCFG register.
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/163406171896.1303830.11217958011385656998.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/idxd/device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index b468ca36d3a0..3cda1c5faf3c 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -801,7 +801,7 @@ static int idxd_groups_config_write(struct idxd_device *idxd)
struct device *dev = &idxd->pdev->dev;
/* Setup bandwidth token limit */
- if (idxd->token_limit) {
+ if (idxd->hw.gen_cap.config_en && idxd->token_limit) {
reg.bits = ioread32(idxd->reg_base + IDXD_GENCFG_OFFSET);
reg.token_limit = idxd->token_limit;
iowrite32(reg.bits, idxd->reg_base + IDXD_GENCFG_OFFSET);
--
2.34.1
From: Pali Rohár <[email protected]>
[ Upstream commit 735f5ae49e1b44742cc63ca9b5c1ffde3e94ba91 ]
The emulated bridge returns incorrect value for PCI_EXP_RTSTA register
during readout in advk_pci_bridge_emul_pcie_conf_read() function: the
correct bit is BIT(16), but we are setting BIT(23), because the code
does
*value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16
where
PCIE_MSG_PM_PME_MASK
is
BIT(7).
The code should probably have been something like
*value = (!!(isr0 & PCIE_MSG_PM_PME_MASK)) << 16,
but we are better of using an if() and using the proper macro for this
bit.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 7aa6d6336223..a924564fdbbc 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -844,7 +844,9 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
case PCI_EXP_RTSTA: {
u32 isr0 = advk_readl(pcie, PCIE_ISR0_REG);
u32 msglog = advk_readl(pcie, PCIE_MSG_LOG_REG);
- *value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16 | (msglog >> 16);
+ *value = msglog >> 16;
+ if (isr0 & PCIE_MSG_PM_PME_MASK)
+ *value |= PCI_EXP_RTSTA_PME;
return PCI_BRIDGE_EMUL_HANDLED;
}
--
2.34.1
From: Paul E. McKenney <[email protected]>
commit f233673cd32a048f2eed69e56b61174c33fb740b upstream.
This commit fixes a couple of typos: s/--doall/--do-all/ and
s/--doallmodconfig/--do-allmodconfig/.
[ paulmck: Add Fixes: supplied by Paul Menzel. ]
Fixes: a115a775a8d5 ("torture: Add "make allmodconfig" to torture.sh")
Reported-by: Paul Menzel <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/rcutorture/bin/torture.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/rcutorture/bin/torture.sh
+++ b/tools/testing/selftests/rcutorture/bin/torture.sh
@@ -71,8 +71,8 @@ usage () {
echo " --configs-rcutorture \"config-file list w/ repeat factor (3*TINY01)\""
echo " --configs-locktorture \"config-file list w/ repeat factor (10*LOCK01)\""
echo " --configs-scftorture \"config-file list w/ repeat factor (2*CFLIST)\""
- echo " --doall"
- echo " --doallmodconfig / --do-no-allmodconfig"
+ echo " --do-all"
+ echo " --do-allmodconfig / --do-no-allmodconfig"
echo " --do-clocksourcewd / --do-no-clocksourcewd"
echo " --do-kasan / --do-no-kasan"
echo " --do-kcsan / --do-no-kcsan"
(cc'ing Valentin)
On 2022-04-05 09:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
This locks up immediately when trying to use tracepoints, due to:
"sched-tracing-don-t-re-read-p-state-when-emitting-sc.patch" aka
"sched/tracing: Don't re-read p->state when emitting sched_switch event"
Reverting this patch makes things work again, at least for 5.15.x;
don't know about other series.
cheers
Holger
From: Damien Le Moal <[email protected]>
[ Upstream commit 7f12845c8389855dbcc67baa068b6832dc4a396e ]
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:
[ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[ 197.762656] Call Trace:
[ 197.765127] <IRQ>
[ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[ 197.772364] ? do_raw_spin_unlock+0x54/0x220
[ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[ 197.782406] process_oq+0xe85/0x7890 [pm80xx]
[ 197.786817] ? lock_acquire+0x194/0x490
[ 197.790697] ? handle_irq_event+0x10e/0x1b0
[ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[ 197.800378] ? __wake_up_bit+0x100/0x100
[ 197.804340] ? lock_is_held_type+0x98/0x110
[ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx]
[ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0
[ 197.818785] __do_softirq+0x1b5/0x82d
[ 197.822485] ? do_raw_spin_unlock+0x54/0x220
[ 197.826799] __irq_exit_rcu+0x17e/0x1e0
[ 197.830678] irq_exit_rcu+0xa/0x20
[ 197.834114] common_interrupt+0x78/0x90
[ 197.840051] </IRQ>
[ 197.844236] <TASK>
[ 197.848397] asm_common_interrupt+0x1e/0x40
Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all().
Link: https://lore.kernel.org/r/[email protected]
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 ++
drivers/scsi/pm8001/pm80xx_hwi.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index d50eb22b2506..bed06ed0f1cb 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1783,6 +1783,7 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
+ ccb->n_elem = 0;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
@@ -1844,6 +1845,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
+ ccb->n_elem = 0;
pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 3c2f2fbdb432..b0a108e1a3d9 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1801,6 +1801,7 @@ static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
+ ccb->n_elem = 0;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit ca374f5d92b8ae778f6a37dd3e7ed809bbf7a953 ]
All fields of the SASProtocolTimerConfig structure have the __le32 type.
As such, use cpu_to_le32() to initialize them. This change suppresses many
sparse warnings:
warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [usertype] pageCode
got int
Note that the check to limit the value of the STP_IDLE_TMO field is removed
as this field is initialized using the fixed (and small) value defined by
the STP_IDLE_TIME macro.
The pm8001_dbg() calls printing the values of the SASProtocolTimerConfig
structure fileds are changed to use le32_to_cpu() to present the values in
human readable form.
Link: https://lore.kernel.org/r/[email protected]
Fixes: a6cb3d012b98 ("[SCSI] pm80xx: thermal, sas controller config and error handling update")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 52 +++++++++++++++-----------------
1 file changed, 25 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index ed6b5e7c2136..69789aa73fd1 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1246,43 +1246,41 @@ pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
circularQ = &pm8001_ha->inbnd_q_tbl[0];
payload.tag = cpu_to_le32(tag);
- SASConfigPage.pageCode = SAS_PROTOCOL_TIMER_CONFIG_PAGE;
- SASConfigPage.MST_MSI = 3 << 15;
- SASConfigPage.STP_SSP_MCT_TMO = (STP_MCT_TMO << 16) | SSP_MCT_TMO;
- SASConfigPage.STP_FRM_TMO = (SAS_MAX_OPEN_TIME << 24) |
- (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER;
- SASConfigPage.STP_IDLE_TMO = STP_IDLE_TIME;
-
- if (SASConfigPage.STP_IDLE_TMO > 0x3FFFFFF)
- SASConfigPage.STP_IDLE_TMO = 0x3FFFFFF;
-
-
- SASConfigPage.OPNRJT_RTRY_INTVL = (SAS_MFD << 16) |
- SAS_OPNRJT_RTRY_INTVL;
- SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO = (SAS_DOPNRJT_RTRY_TMO << 16)
- | SAS_COPNRJT_RTRY_TMO;
- SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR = (SAS_DOPNRJT_RTRY_THR << 16)
- | SAS_COPNRJT_RTRY_THR;
- SASConfigPage.MAX_AIP = SAS_MAX_AIP;
+ SASConfigPage.pageCode = cpu_to_le32(SAS_PROTOCOL_TIMER_CONFIG_PAGE);
+ SASConfigPage.MST_MSI = cpu_to_le32(3 << 15);
+ SASConfigPage.STP_SSP_MCT_TMO =
+ cpu_to_le32((STP_MCT_TMO << 16) | SSP_MCT_TMO);
+ SASConfigPage.STP_FRM_TMO =
+ cpu_to_le32((SAS_MAX_OPEN_TIME << 24) |
+ (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER);
+ SASConfigPage.STP_IDLE_TMO = cpu_to_le32(STP_IDLE_TIME);
+
+ SASConfigPage.OPNRJT_RTRY_INTVL =
+ cpu_to_le32((SAS_MFD << 16) | SAS_OPNRJT_RTRY_INTVL);
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO =
+ cpu_to_le32((SAS_DOPNRJT_RTRY_TMO << 16) | SAS_COPNRJT_RTRY_TMO);
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR =
+ cpu_to_le32((SAS_DOPNRJT_RTRY_THR << 16) | SAS_COPNRJT_RTRY_THR);
+ SASConfigPage.MAX_AIP = cpu_to_le32(SAS_MAX_AIP);
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.pageCode 0x%08x\n",
- SASConfigPage.pageCode);
+ le32_to_cpu(SASConfigPage.pageCode));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MST_MSI 0x%08x\n",
- SASConfigPage.MST_MSI);
+ le32_to_cpu(SASConfigPage.MST_MSI));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_SSP_MCT_TMO 0x%08x\n",
- SASConfigPage.STP_SSP_MCT_TMO);
+ le32_to_cpu(SASConfigPage.STP_SSP_MCT_TMO));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_FRM_TMO 0x%08x\n",
- SASConfigPage.STP_FRM_TMO);
+ le32_to_cpu(SASConfigPage.STP_FRM_TMO));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_IDLE_TMO 0x%08x\n",
- SASConfigPage.STP_IDLE_TMO);
+ le32_to_cpu(SASConfigPage.STP_IDLE_TMO));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.OPNRJT_RTRY_INTVL 0x%08x\n",
- SASConfigPage.OPNRJT_RTRY_INTVL);
+ le32_to_cpu(SASConfigPage.OPNRJT_RTRY_INTVL));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO 0x%08x\n",
- SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO);
+ le32_to_cpu(SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR 0x%08x\n",
- SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR);
+ le32_to_cpu(SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MAX_AIP 0x%08x\n",
- SASConfigPage.MAX_AIP);
+ le32_to_cpu(SASConfigPage.MAX_AIP));
memcpy(&payload.cfg_pg, &SASConfigPage,
sizeof(SASProtocolTimerConfig_t));
--
2.34.1
From: Miroslav Lichvar <[email protected]>
[ Upstream commit bfcbb76b0f595ea9ede9f7a218086fef85242f10 ]
When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.
This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:
BUG: unable to handle page fault for address: ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
timecounter_read+0xf/0x50
ptp_vclock_refresh+0x2c/0x50
? ptp_clock_release+0x40/0x40
ptp_aux_kworker+0x17/0x30
kthread_worker_fn+0x9b/0x240
? kthread_should_park+0x30/0x30
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Miroslav Lichvar <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Cc: Yangbo Lu <[email protected]>
Cc: Yang Yingliang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_clock.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index f9b2d66b0443..8a652a367625 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -317,11 +317,18 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
}
EXPORT_SYMBOL(ptp_clock_register);
+static int unregister_vclock(struct device *dev, void *data)
+{
+ struct ptp_clock *ptp = dev_get_drvdata(dev);
+
+ ptp_vclock_unregister(info_to_vclock(ptp->info));
+ return 0;
+}
+
int ptp_clock_unregister(struct ptp_clock *ptp)
{
if (ptp_vclock_in_use(ptp)) {
- pr_err("ptp: virtual clock in use\n");
- return -EBUSY;
+ device_for_each_child(&ptp->dev, NULL, unregister_vclock);
}
ptp->defunct = 1;
--
2.34.1
From: Richard Schleich <[email protected]>
[ Upstream commit bdf8762da268d2a34abf517c36528413906e9cd5 ]
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2837 on newer kernel versions.
Signed-off-by: Richard Schleich <[email protected]>
Tested-by: Stefan Wahren <[email protected]>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/bcm2837.dtsi | 49 ++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+ * /about-the-l1-memory-system?lang=en
+ *
+ * Source for d/i-cache-size
+ * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+ */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -54,6 +68,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -62,6 +83,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -70,6 +98,27 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for cache-line-size + cache-sets
+ * https://developer.arm.com/documentation/ddi0500
+ * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+ * Source for cache-size
+ * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+ cache-level = <2>;
};
};
};
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit ca1697eb09208f0168d94b88b72f57505339cbe5 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 3568459a5113 ("ALSA: at73c213: manage SSC clock")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/spi/at73c213.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 76c0e37a838c..8a2da6b1012e 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -218,7 +218,9 @@ static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
runtime->hw = snd_at73c213_playback_hw;
chip->substream = substream;
- clk_enable(chip->ssc->clk);
+ err = clk_enable(chip->ssc->clk);
+ if (err)
+ return err;
return 0;
}
@@ -776,7 +778,9 @@ static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
goto out;
/* Enable DAC master clock. */
- clk_enable(chip->board->dac_clk);
+ retval = clk_enable(chip->board->dac_clk);
+ if (retval)
+ goto out;
/* Initialize at73c213 on SPI bus. */
retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
@@ -889,7 +893,9 @@ static int snd_at73c213_dev_init(struct snd_card *card,
chip->card = card;
chip->irq = -1;
- clk_enable(chip->ssc->clk);
+ retval = clk_enable(chip->ssc->clk);
+ if (retval)
+ return retval;
retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
if (retval) {
@@ -1008,7 +1014,9 @@ static int snd_at73c213_remove(struct spi_device *spi)
int retval;
/* Stop playback. */
- clk_enable(chip->ssc->clk);
+ retval = clk_enable(chip->ssc->clk);
+ if (retval)
+ goto out;
ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
clk_disable(chip->ssc->clk);
@@ -1088,9 +1096,16 @@ static int snd_at73c213_resume(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct snd_at73c213 *chip = card->private_data;
+ int retval;
- clk_enable(chip->board->dac_clk);
- clk_enable(chip->ssc->clk);
+ retval = clk_enable(chip->board->dac_clk);
+ if (retval)
+ return retval;
+ retval = clk_enable(chip->ssc->clk);
+ if (retval) {
+ clk_disable(chip->board->dac_clk);
+ return retval;
+ }
ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
return 0;
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit afd427048047e8efdedab30e8888044e2be5aa9c upstream.
Following hung tasks:
[ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132
[ 77.028820] Call Trace:
[ 77.029027] schedule+0x8c/0x1b0
[ 77.029067] mutex_lock+0x50/0x60
[ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs]
[ 77.029117] __writeback_single_inode+0x43c/0x570
[ 77.029128] writeback_sb_inodes+0x259/0x740
[ 77.029148] wb_writeback+0x107/0x4d0
[ 77.029163] wb_workfn+0x162/0x7b0
[ 92.390442] task:aa state:D stack: 0 pid: 1506
[ 92.390448] Call Trace:
[ 92.390458] schedule+0x8c/0x1b0
[ 92.390461] wb_wait_for_completion+0x82/0xd0
[ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110
[ 92.390472] writeback_inodes_sb_nr+0x14/0x20
[ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs]
[ 92.390503] do_rename.cold+0x7f/0x187 [ubifs]
[ 92.390549] ubifs_rename+0x8b/0x180 [ubifs]
[ 92.390571] vfs_rename+0xdb2/0x1170
[ 92.390580] do_renameat2+0x554/0x770
, are caused by concurrent rename whiteout and inode writeback processes:
rename_whiteout(Thread 1) wb_workfn(Thread2)
ubifs_rename
do_rename
lock_4_inodes (Hold ui_mutex)
ubifs_budget_space
make_free_space
shrink_liability
__writeback_inodes_sb_nr
bdi_split_work_to_wbs (Queue new wb work)
wb_do_writeback(wb work)
__writeback_single_inode
ubifs_write_inode
LOCK(ui_mutex)
↑
wb_wait_for_completion (Wait wb work) <-- deadlock!
Reproducer (Detail program in [Link]):
1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT)
2. Consume out of space before kernel(mdelay) doing budget for whiteout
Fix it by doing whiteout space budget before locking ubifs inodes.
BTW, it also fixes wrong goto tag 'out_release' in whiteout budget
error handling path(It should at least recover dir i_size and unlock
4 ubifs inodes).
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214733
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -1324,6 +1324,7 @@ static int do_rename(struct inode *old_d
if (flags & RENAME_WHITEOUT) {
union ubifs_dev_desc *dev = NULL;
+ struct ubifs_budget_req wht_req;
dev = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS);
if (!dev) {
@@ -1345,6 +1346,20 @@ static int do_rename(struct inode *old_d
whiteout_ui->data = dev;
whiteout_ui->data_len = ubifs_encode_dev(dev, MKDEV(0, 0));
ubifs_assert(c, !whiteout_ui->dirty);
+
+ memset(&wht_req, 0, sizeof(struct ubifs_budget_req));
+ wht_req.dirtied_ino = 1;
+ wht_req.dirtied_ino_d = ALIGN(whiteout_ui->data_len, 8);
+ /*
+ * To avoid deadlock between space budget (holds ui_mutex and
+ * waits wb work) and writeback work(waits ui_mutex), do space
+ * budget before ubifs inodes locked.
+ */
+ err = ubifs_budget_space(c, &wht_req);
+ if (err) {
+ iput(whiteout);
+ goto out_release;
+ }
}
lock_4_inodes(old_dir, new_dir, new_inode, whiteout);
@@ -1419,16 +1434,6 @@ static int do_rename(struct inode *old_d
}
if (whiteout) {
- struct ubifs_budget_req wht_req = { .dirtied_ino = 1,
- .dirtied_ino_d = \
- ALIGN(ubifs_inode(whiteout)->data_len, 8) };
-
- err = ubifs_budget_space(c, &wht_req);
- if (err) {
- iput(whiteout);
- goto out_release;
- }
-
inc_nlink(whiteout);
mark_inode_dirty(whiteout);
From: Taniya Das <[email protected]>
[ Upstream commit 58922910add18583d5273c2edcdb9fd7bf4eca02 ]
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.
Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/clk-rcg2.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index e1b1b426fae4..b831975a9606 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -264,7 +264,7 @@ static int clk_rcg2_determine_floor_rate(struct clk_hw *hw,
static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
{
- u32 cfg, mask;
+ u32 cfg, mask, d_val, not2d_val, n_minus_m;
struct clk_hw *hw = &rcg->clkr.hw;
int ret, index = qcom_find_src_index(hw, rcg->parent_map, f->src);
@@ -283,8 +283,17 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
if (ret)
return ret;
+ /* Calculate 2d value */
+ d_val = f->n;
+
+ n_minus_m = f->n - f->m;
+ n_minus_m *= 2;
+
+ d_val = clamp_t(u32, d_val, f->m, n_minus_m);
+ not2d_val = ~d_val & mask;
+
ret = regmap_update_bits(rcg->clkr.regmap,
- RCG_D_OFFSET(rcg), mask, ~f->n);
+ RCG_D_OFFSET(rcg), mask, not2d_val);
if (ret)
return ret;
}
--
2.34.1
From: Michael Ellerman <[email protected]>
[ Upstream commit fe2640bd7a62f1f7c3f55fbda31084085075bc30 ]
In remove_phb_dynamic() we use &phb->io_resource, after we've called
device_unregister(&host_bridge->dev). But the unregister may have freed
phb, because pcibios_free_controller_deferred() is the release function
for the host_bridge.
If there are no outstanding references when we call device_unregister()
then phb will be freed out from under us.
This has gone mainly unnoticed, but with slub_debug and page_poison
enabled it can lead to a crash:
PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr"
#0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc
#1 [c0000000e4f075d0] oops_end at c000000000029608
#2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4
#3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8
#4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30
Data SLB Access [380] exception frame:
R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100
R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9
R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff
R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000
R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000
R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003
R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005
R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0
R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8
R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800
R30: c00000004d1d2400 R31: c00000004d1d2540
NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474
CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003
CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3
DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2
[NIP : release_resource+56]
[LR : release_resource+48]
#5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable)
#6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648
#7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io]
#8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io]
#9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c
#10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504
#11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868
#12 [c0000000e4f07c70] new_sync_write at c00000000054339c
#13 [c0000000e4f07d10] vfs_write at c000000000546624
#14 [c0000000e4f07d60] ksys_write at c0000000005469f4
#15 [c0000000e4f07db0] system_call_exception at c000000000030840
#16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168
To avoid it, we can take a reference to the host_bridge->dev until we're
done using phb. Then when we drop the reference the phb will be freed.
Fixes: 2dd9c11b9d4d ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)")
Reported-by: David Dai <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Tested-by: Sachin Sant <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/pci_dlpar.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 90c9d3531694..4ba824568119 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -78,6 +78,9 @@ int remove_phb_dynamic(struct pci_controller *phb)
pseries_msi_free_domains(phb);
+ /* Keep a reference so phb isn't freed yet */
+ get_device(&host_bridge->dev);
+
/* Remove the PCI bus and unregister the bridge device from sysfs */
phb->bus = NULL;
pci_remove_bus(b);
@@ -101,6 +104,7 @@ int remove_phb_dynamic(struct pci_controller *phb)
* the pcibios_free_controller_deferred() callback;
* see pseries_root_bridge_prepare().
*/
+ put_device(&host_bridge->dev);
return 0;
}
--
2.34.1
From: Mark Brown <[email protected]>
[ Upstream commit bc7ee2e34b219da6813c17a1680dd20766648883 ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Michael Walle <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/devices/mchp23k256.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index 77c872fd3d83..7d188cdff6a2 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -229,6 +229,19 @@ static const struct of_device_id mchp23k256_of_table[] = {
};
MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
+static const struct spi_device_id mchp23k256_spi_ids[] = {
+ {
+ .name = "mchp23k256",
+ .driver_data = (kernel_ulong_t)&mchp23k256_caps,
+ },
+ {
+ .name = "mchp23lcv1024",
+ .driver_data = (kernel_ulong_t)&mchp23lcv1024_caps,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, mchp23k256_spi_ids);
+
static struct spi_driver mchp23k256_driver = {
.driver = {
.name = "mchp23k256",
@@ -236,6 +249,7 @@ static struct spi_driver mchp23k256_driver = {
},
.probe = mchp23k256_probe,
.remove = mchp23k256_remove,
+ .id_table = mchp23k256_spi_ids,
};
module_spi_driver(mchp23k256_driver);
--
2.34.1
From: Minghao Chi <[email protected]>
[ Upstream commit c9839acfcbe20ce43d363c2a9d0772472d9921c0 ]
Use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Minghao Chi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-tegra20-slink.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 3226c4e1c7c0..3b44ca455049 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1003,14 +1003,8 @@ static int tegra_slink_probe(struct platform_device *pdev)
struct resource *r;
int ret, spi_irq;
const struct tegra_slink_chip_data *cdata = NULL;
- const struct of_device_id *match;
- match = of_match_device(tegra_slink_of_match, &pdev->dev);
- if (!match) {
- dev_err(&pdev->dev, "Error: No device match found\n");
- return -ENODEV;
- }
- cdata = match->data;
+ cdata = of_device_get_match_data(&pdev->dev);
master = spi_alloc_master(&pdev->dev, sizeof(*tspi));
if (!master) {
--
2.34.1
From: Yajun Deng <[email protected]>
[ Upstream commit 7c4a539ec38f4ce400a0f3fcb5ff6c940fcd67bb ]
ib_destroy_qp() would called by ib_create_qp_user() if error, the former
contains ib_qp_usecnt_dec(), but ib_qp_usecnt_inc() was not called before.
So move ib_qp_usecnt_inc() into create_qp().
Fixes: d2b10794fc13 ("RDMA/core: Create clean QP creations interface for uverbs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Yajun Deng <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/uverbs_cmd.c | 1 -
drivers/infiniband/core/uverbs_std_types_qp.c | 1 -
drivers/infiniband/core/verbs.c | 3 +--
3 files changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index d1345d76d9b1..5a99e31df5f5 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -1438,7 +1438,6 @@ static int create_qp(struct uverbs_attr_bundle *attrs,
ret = PTR_ERR(qp);
goto err_put;
}
- ib_qp_usecnt_inc(qp);
obj->uevent.uobject.object = qp;
obj->uevent.event_file = READ_ONCE(attrs->ufile->default_async_file);
diff --git a/drivers/infiniband/core/uverbs_std_types_qp.c b/drivers/infiniband/core/uverbs_std_types_qp.c
index dd1075466f61..75353e09c6fe 100644
--- a/drivers/infiniband/core/uverbs_std_types_qp.c
+++ b/drivers/infiniband/core/uverbs_std_types_qp.c
@@ -254,7 +254,6 @@ static int UVERBS_HANDLER(UVERBS_METHOD_QP_CREATE)(
ret = PTR_ERR(qp);
goto err_put;
}
- ib_qp_usecnt_inc(qp);
if (attr.qp_type == IB_QPT_XRC_TGT) {
obj->uxrcd = container_of(xrcd_uobj, struct ib_uxrcd_object,
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 59e20936b800..b78cd65d20a6 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -1253,6 +1253,7 @@ static struct ib_qp *create_qp(struct ib_device *dev, struct ib_pd *pd,
if (ret)
goto err_security;
+ ib_qp_usecnt_inc(qp);
rdma_restrack_add(&qp->res);
return qp;
@@ -1353,8 +1354,6 @@ struct ib_qp *ib_create_qp_kernel(struct ib_pd *pd,
if (IS_ERR(qp))
return qp;
- ib_qp_usecnt_inc(qp);
-
if (qp_init_attr->cap.max_rdma_ctxs) {
ret = rdma_rw_init_mrs(qp, qp_init_attr);
if (ret)
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 505b5b1616e200042999de715dbe7c1e2735cd65 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/qcom_q6v5_adsp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 8b0d8bbacd2e..c10d452c9703 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -406,6 +406,7 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
}
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret)
return ret;
--
2.34.1
From: Martin Blumenstingl <[email protected]>
[ Upstream commit fa747d75f65d1b1cbc3f4691fa67b695e8a399c8 ]
When afbcd.ops->init fails we need to free the struct drm_device. Also
all errors which come after afbcd.ops->init was successful need to exit
the AFBCD, just like meson_drv_unbind() does.
Fixes: d1b5e41e13a7e9 ("drm/meson: Add AFBCD module driver")
Signed-off-by: Martin Blumenstingl <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 45bfe9451db8..c98525d60df5 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -302,42 +302,42 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
if (priv->afbcd.ops) {
ret = priv->afbcd.ops->init(priv);
if (ret)
- return ret;
+ goto free_drm;
}
/* Encoder Initialization */
ret = meson_venc_cvbs_create(priv);
if (ret)
- goto free_drm;
+ goto exit_afbcd;
if (has_components) {
ret = component_bind_all(drm->dev, drm);
if (ret) {
dev_err(drm->dev, "Couldn't bind all components\n");
- goto free_drm;
+ goto exit_afbcd;
}
}
ret = meson_encoder_hdmi_init(priv);
if (ret)
- goto free_drm;
+ goto exit_afbcd;
ret = meson_plane_create(priv);
if (ret)
- goto free_drm;
+ goto exit_afbcd;
ret = meson_overlay_create(priv);
if (ret)
- goto free_drm;
+ goto exit_afbcd;
ret = meson_crtc_create(priv);
if (ret)
- goto free_drm;
+ goto exit_afbcd;
ret = request_irq(priv->vsync_irq, meson_irq, 0, drm->driver->name, drm);
if (ret)
- goto free_drm;
+ goto exit_afbcd;
drm_mode_config_reset(drm);
@@ -355,6 +355,9 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
uninstall_irq:
free_irq(priv->vsync_irq, drm);
+exit_afbcd:
+ if (priv->afbcd.ops)
+ priv->afbcd.ops->exit(priv);
free_drm:
drm_dev_put(drm);
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit 32cb08e958696908a9aad5e49a78d74f7e32fffb ]
Syzbot hit general protection fault in __pm_runtime_resume(). The problem
was in missing NULL check.
hu->serdev can be NULL and we should not blindly pass &serdev->dev
somewhere, since it will cause GPF.
Reported-by: [email protected]
Fixes: d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_h5.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index d49a39d17d7d..e0ea9d25bb39 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -629,9 +629,11 @@ static int h5_enqueue(struct hci_uart *hu, struct sk_buff *skb)
break;
}
- pm_runtime_get_sync(&hu->serdev->dev);
- pm_runtime_mark_last_busy(&hu->serdev->dev);
- pm_runtime_put_autosuspend(&hu->serdev->dev);
+ if (hu->serdev) {
+ pm_runtime_get_sync(&hu->serdev->dev);
+ pm_runtime_mark_last_busy(&hu->serdev->dev);
+ pm_runtime_put_autosuspend(&hu->serdev->dev);
+ }
return 0;
}
--
2.34.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 5a06fcb15b43d1f7bf740c672950122331cb5655 ]
test_kernel_ptr() uses access_ok() to figure out if a given address
points to user space instead of kernel space. However on architectures
that set CONFIG_ALTERNATE_USER_ADDRESS_SPACE, a pointer can be valid
for both, and the check always fails because access_ok() returns true.
Make the check for user space pointers conditional on the type of
address space layout.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/test_lockup.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/lib/test_lockup.c b/lib/test_lockup.c
index 6a0f329a794a..c3fd87d6c2dd 100644
--- a/lib/test_lockup.c
+++ b/lib/test_lockup.c
@@ -417,9 +417,14 @@ static bool test_kernel_ptr(unsigned long addr, int size)
return false;
/* should be at least readable kernel address */
- if (access_ok((void __user *)ptr, 1) ||
- access_ok((void __user *)ptr + size - 1, 1) ||
- get_kernel_nofault(buf, ptr) ||
+ if (!IS_ENABLED(CONFIG_ALTERNATE_USER_ADDRESS_SPACE) &&
+ (access_ok((void __user *)ptr, 1) ||
+ access_ok((void __user *)ptr + size - 1, 1))) {
+ pr_err("user space ptr invalid in kernel: %#lx\n", addr);
+ return true;
+ }
+
+ if (get_kernel_nofault(buf, ptr) ||
get_kernel_nofault(buf, ptr + size - 1)) {
pr_err("invalid kernel ptr: %#lx\n", addr);
return true;
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 1763933d377ecb05454f8d20e3c8922480db2ac0 ]
Virtual GPIOs do not have any hardware state associated with them. Any
attempt to read back hardware state for these pins result in error
codes.
Skip dumping extra pin config information for these virtual GPIOs.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 2133964dfd59..02e2a259edd3 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -580,6 +580,9 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
if (gpio >= hw->soc->npins)
return -EINVAL;
+ if (mtk_is_virt_gpio(hw, gpio))
+ return -EINVAL;
+
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
pinmux = mtk_pctrl_get_pinmux(hw, gpio);
if (pinmux >= hw->soc->nfuncs)
--
2.34.1
From: Yafang Shao <[email protected]>
[ Upstream commit a32ea51a3f17ce6524c9fc19d311e708331c8b5f ]
When I checked the code in skeleton header file generated with my own
bpf prog, I found there may be possible NULL pointer dereference when
destroying skeleton. Then I checked the in-tree bpf progs, finding that is
a common issue. Let's take the generated samples/bpf/xdp_redirect_cpu.skel.h
for example. Below is the generated code in
xdp_redirect_cpu__create_skeleton():
xdp_redirect_cpu__create_skeleton
struct bpf_object_skeleton *s;
s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));
if (!s)
goto error;
...
error:
bpf_object__destroy_skeleton(s);
return -ENOMEM;
After goto error, the NULL 's' will be deferenced in
bpf_object__destroy_skeleton().
We can simply fix this issue by just adding a NULL check in
bpf_object__destroy_skeleton().
Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support")
Signed-off-by: Yafang Shao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/libbpf.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 0ad29203cbfb..693e14799fb9 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -10809,6 +10809,9 @@ void bpf_object__detach_skeleton(struct bpf_object_skeleton *s)
void bpf_object__destroy_skeleton(struct bpf_object_skeleton *s)
{
+ if (!s)
+ return;
+
if (s->progs)
bpf_object__detach_skeleton(s);
if (s->obj)
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 4172843ed4a38f97084032f74f07b2037b5da3a6 ]
The btf__resolve_size() function returns negative error codes so
"elem_size" must be signed for the error handling to work.
Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/20220208071552.GB10495@kili
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf_dump.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 8c9325802793..c1182dd94677 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -1829,14 +1829,15 @@ static int btf_dump_array_data(struct btf_dump *d,
{
const struct btf_array *array = btf_array(t);
const struct btf_type *elem_type;
- __u32 i, elem_size = 0, elem_type_id;
+ __u32 i, elem_type_id;
+ __s64 elem_size;
bool is_array_member;
elem_type_id = array->type;
elem_type = skip_mods_and_typedefs(d->btf, elem_type_id, NULL);
elem_size = btf__resolve_size(d->btf, elem_type_id);
if (elem_size <= 0) {
- pr_warn("unexpected elem size %d for array type [%u]\n", elem_size, id);
+ pr_warn("unexpected elem size %lld for array type [%u]\n", elem_size, id);
return -EINVAL;
}
--
2.34.1
From: Jie Hai <[email protected]>
[ Upstream commit b95044b38425f563404234d96bbb20cc6360c7e1 ]
Remove the loaded hisi_dma driver and reload it, the driver fails
to work properly. The following error is reported in the kernel log:
[ 1475.597609] hisi_dma 0000:7b:00.0: Failed to allocate MSI vectors!
[ 1475.604915] hisi_dma: probe of 0000:7b:00.0 failed with error -28
As noted in "The MSI Driver Guide HOWTO"[1], the number of MSI
interrupt must be a power of two. The Kunpeng DMA driver allocates 30
MSI interrupts. As a result, no space left on device is reported
when the driver is reloaded and allocates interrupt vectors from the
interrupt domain.
This patch changes the number of interrupt vectors allocated by
hisi_dma driver to 32 to avoid this problem.
[1] https://www.kernel.org/doc/html/latest/PCI/msi-howto.html
Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <[email protected]>
Acked-by: Zhou Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/hisi_dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/hisi_dma.c b/drivers/dma/hisi_dma.c
index c855a0e4f9ff..f680e9b40bf7 100644
--- a/drivers/dma/hisi_dma.c
+++ b/drivers/dma/hisi_dma.c
@@ -30,7 +30,7 @@
#define HISI_DMA_MODE 0x217c
#define HISI_DMA_OFFSET 0x100
-#define HISI_DMA_MSI_NUM 30
+#define HISI_DMA_MSI_NUM 32
#define HISI_DMA_CHAN_NUM 30
#define HISI_DMA_Q_DEPTH_VAL 1024
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 5575f7f49134c7386a684335c9007737c606d3b5 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: afb93d716533 ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/imx/imx8m.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/sof/imx/imx8m.c b/sound/soc/sof/imx/imx8m.c
index 892e1482f97f..b3d3edc36bb0 100644
--- a/sound/soc/sof/imx/imx8m.c
+++ b/sound/soc/sof/imx/imx8m.c
@@ -191,6 +191,7 @@ static int imx8m_probe(struct snd_sof_dev *sdev)
}
ret = of_address_to_resource(res_node, 0, &res);
+ of_node_put(res_node);
if (ret) {
dev_err(&pdev->dev, "failed to get reserved region address\n");
goto exit_pdev_unregister;
--
2.34.1
From: Eugen Hristev <[email protected]>
[ Upstream commit 72802a86e11c34e819fbfb38f58c5aef668f833d ]
The ISC supports a full broad range of frame sizes.
Until now, the subdevice was queried for possible frame sizes and these
were reported to the user space.
However, the ISC should not care about which frame sizes the subdev
supports, as long as this frame size is supported.
Thus, report a continuous range from smallest frame size up to the max
resolution.
Signed-off-by: Eugen Hristev <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/atmel/atmel-isc-base.c | 22 +++++++++----------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index ebf264b980f9..f768be3c4059 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -1369,14 +1369,12 @@ static int isc_enum_framesizes(struct file *file, void *fh,
struct v4l2_frmsizeenum *fsize)
{
struct isc_device *isc = video_drvdata(file);
- struct v4l2_subdev_frame_size_enum fse = {
- .code = isc->config.sd_format->mbus_code,
- .index = fsize->index,
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
int ret = -EINVAL;
int i;
+ if (fsize->index)
+ return -EINVAL;
+
for (i = 0; i < isc->num_user_formats; i++)
if (isc->user_formats[i]->fourcc == fsize->pixel_format)
ret = 0;
@@ -1388,14 +1386,14 @@ static int isc_enum_framesizes(struct file *file, void *fh,
if (ret)
return ret;
- ret = v4l2_subdev_call(isc->current_subdev->sd, pad, enum_frame_size,
- NULL, &fse);
- if (ret)
- return ret;
+ fsize->type = V4L2_FRMSIZE_TYPE_CONTINUOUS;
- fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
- fsize->discrete.width = fse.max_width;
- fsize->discrete.height = fse.max_height;
+ fsize->stepwise.min_width = 16;
+ fsize->stepwise.max_width = isc->max_width;
+ fsize->stepwise.min_height = 16;
+ fsize->stepwise.max_height = isc->max_height;
+ fsize->stepwise.step_width = 1;
+ fsize->stepwise.step_height = 1;
return 0;
}
--
2.34.1
From: Quinn Tran <[email protected]>
commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99 upstream.
User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.
Set the online state before reporting of the availability of the session.
Link: https://lore.kernel.org/r/[email protected]
Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 5 +++--
drivers/scsi/qla2xxx/qla_nvme.c | 5 +++++
2 files changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5740,6 +5740,8 @@ qla2x00_reg_remote_port(scsi_qla_host_t
if (atomic_read(&fcport->state) == FCS_ONLINE)
return;
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
rport_ids.node_name = wwn_to_u64(fcport->node_name);
rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
@@ -5847,6 +5849,7 @@ qla2x00_update_fcport(scsi_qla_host_t *v
qla2x00_reg_remote_port(vha, fcport);
break;
case MODE_TARGET:
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
if (!vha->vha_tgt.qla_tgt->tgt_stop &&
!vha->vha_tgt.qla_tgt->tgt_stopped)
qlt_fc_port_added(vha, fcport);
@@ -5861,8 +5864,6 @@ qla2x00_update_fcport(scsi_qla_host_t *v
break;
}
- qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-
if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
if (fcport->id_changed) {
fcport->id_changed = 0;
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -35,6 +35,11 @@ int qla_nvme_register_remote(struct scsi
(fcport->nvme_flag & NVME_FLAG_REGISTERED))
return 0;
+ if (atomic_read(&fcport->state) == FCS_ONLINE)
+ return 0;
+
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
fcport->nvme_flag &= ~NVME_FLAG_RESETTING;
memset(&req, 0, sizeof(struct nvme_fc_port_info));
From: Andreas Gruenbacher <[email protected]>
commit 7336905a89f19173bf9301cd50a24421162f417c upstream.
When gfs2_setattr_size() fails, it calls gfs2_rs_delete(ip, NULL) to get
rid of any reservations the inode may have. Instead, it should pass in
the inode's write count as the second parameter to allow
gfs2_rs_delete() to figure out if the inode has any writers left.
In a next step, there are two instances of gfs2_rs_delete(ip, NULL) left
where we know that there can be no other users of the inode. Replace
those with gfs2_rs_deltree(&ip->i_res) to avoid the unnecessary write
count check.
With that, gfs2_rs_delete() is only called with the inode's actual write
count, so get rid of the second parameter.
Fixes: a097dc7e24cb ("GFS2: Make rgrp reservations part of the gfs2_inode structure")
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/bmap.c | 2 +-
fs/gfs2/file.c | 2 +-
fs/gfs2/inode.c | 2 +-
fs/gfs2/rgrp.c | 7 ++++---
fs/gfs2/rgrp.h | 2 +-
fs/gfs2/super.c | 2 +-
6 files changed, 9 insertions(+), 8 deletions(-)
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -2204,7 +2204,7 @@ int gfs2_setattr_size(struct inode *inod
ret = do_shrink(inode, newsize);
out:
- gfs2_rs_delete(ip, NULL);
+ gfs2_rs_delete(ip);
gfs2_qa_put(ip);
return ret;
}
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -713,7 +713,7 @@ static int gfs2_release(struct inode *in
if (file->f_mode & FMODE_WRITE) {
if (gfs2_rs_active(&ip->i_res))
- gfs2_rs_delete(ip, &inode->i_writecount);
+ gfs2_rs_delete(ip);
gfs2_qa_put(ip);
}
return 0;
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -811,7 +811,7 @@ fail_free_inode:
if (free_vfs_inode) /* else evict will do the put for us */
gfs2_glock_put(ip->i_gl);
}
- gfs2_rs_delete(ip, NULL);
+ gfs2_rs_deltree(&ip->i_res);
gfs2_qa_put(ip);
fail_free_acls:
posix_acl_release(default_acl);
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -680,13 +680,14 @@ void gfs2_rs_deltree(struct gfs2_blkrese
/**
* gfs2_rs_delete - delete a multi-block reservation
* @ip: The inode for this reservation
- * @wcount: The inode's write count, or NULL
*
*/
-void gfs2_rs_delete(struct gfs2_inode *ip, atomic_t *wcount)
+void gfs2_rs_delete(struct gfs2_inode *ip)
{
+ struct inode *inode = &ip->i_inode;
+
down_write(&ip->i_rw_mutex);
- if ((wcount == NULL) || (atomic_read(wcount) <= 1))
+ if (atomic_read(&inode->i_writecount) <= 1)
gfs2_rs_deltree(&ip->i_res);
up_write(&ip->i_rw_mutex);
}
--- a/fs/gfs2/rgrp.h
+++ b/fs/gfs2/rgrp.h
@@ -45,7 +45,7 @@ extern int gfs2_alloc_blocks(struct gfs2
bool dinode, u64 *generation);
extern void gfs2_rs_deltree(struct gfs2_blkreserv *rs);
-extern void gfs2_rs_delete(struct gfs2_inode *ip, atomic_t *wcount);
+extern void gfs2_rs_delete(struct gfs2_inode *ip);
extern void __gfs2_free_blocks(struct gfs2_inode *ip, struct gfs2_rgrpd *rgd,
u64 bstart, u32 blen, int meta);
extern void gfs2_free_meta(struct gfs2_inode *ip, struct gfs2_rgrpd *rgd,
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1398,7 +1398,7 @@ out:
truncate_inode_pages_final(&inode->i_data);
if (ip->i_qadata)
gfs2_assert_warn(sdp, ip->i_qadata->qa_ref == 0);
- gfs2_rs_delete(ip, NULL);
+ gfs2_rs_deltree(&ip->i_res);
gfs2_ordered_del_inode(ip);
clear_inode(inode);
gfs2_dir_hash_inval(ip);
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit b0217519236924f77a8382b4004e43ef8fd0dcbb ]
set "HPH Type" Kcontrol max value of WCD_MBHC_HPH_STEREO instead of UINT_MAX.
set "HPHL/R Impedance" Kcontrols max value to INT_MAX instead of UINT_MAX as
max field is integer type.
Without this patch amixer for these controls will show -1 as max value to userspace.
Fixes: bcee7ed09b8e ("ASoC: codecs: wcd938x: add Multi Button Headset Control support")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wcd938x.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
index 54671bbf7471..4480c118ed5d 100644
--- a/sound/soc/codecs/wcd938x.c
+++ b/sound/soc/codecs/wcd938x.c
@@ -3577,14 +3577,14 @@ static int wcd938x_hph_impedance_get(struct snd_kcontrol *kcontrol,
}
static const struct snd_kcontrol_new hph_type_detect_controls[] = {
- SOC_SINGLE_EXT("HPH Type", 0, 0, UINT_MAX, 0,
+ SOC_SINGLE_EXT("HPH Type", 0, 0, WCD_MBHC_HPH_STEREO, 0,
wcd938x_get_hph_type, NULL),
};
static const struct snd_kcontrol_new impedance_detect_controls[] = {
- SOC_SINGLE_EXT("HPHL Impedance", 0, 0, UINT_MAX, 0,
+ SOC_SINGLE_EXT("HPHL Impedance", 0, 0, INT_MAX, 0,
wcd938x_hph_impedance_get, NULL),
- SOC_SINGLE_EXT("HPHR Impedance", 0, 1, UINT_MAX, 0,
+ SOC_SINGLE_EXT("HPHR Impedance", 0, 1, INT_MAX, 0,
wcd938x_hph_impedance_get, NULL),
};
--
2.34.1
From: Michael Ellerman <[email protected]>
[ Upstream commit 2863dd2db23e0407f6c50b8ba5c0e55abef894f1 ]
When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass
-mcpu=powerpc64 to the compiler, even when we're building a 32-bit
kernel.
This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in
the Makefile that was written before 32-bit supported GENERIC_CPU. Prior
to that the else block only applied to 64-bit Book3E.
The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big
endian PowerPC ... architecture machine [type], with an appropriate,
generic processor model assumed for scheduling purposes."
It's unclear how that interacts with -m32, which we are also passing,
although obviously -m32 is taking precedence in some sense, as the
32-bit kernel only contains 32-bit instructions.
This was noticed by inspection, not via any bug reports, but it does
affect code generation. Comparing before/after code generation, there
are some changes to instruction scheduling, and the after case (with
-mcpu=powerpc64 removed) the compiler seems more keen to use r8.
Fix it by making the else case only apply to Book3E 64, which excludes
32-bit.
Fixes: 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index aa6808e70647..72610e2d6176 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -173,7 +173,7 @@ else
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,$(call cc-option,-mtune=power5))
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mcpu=power5,-mcpu=power4)
endif
-else
+else ifdef CONFIG_PPC_BOOK3E_64
CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
endif
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
[ Upstream commit 3eb00f89162e80083dfcaa842468b510462cfeaa ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes: b4626a7f4892 ("CLK: Add Loongson1C clock support")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/loongson1/clk-loongson1c.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/loongson1/clk-loongson1c.c b/drivers/clk/loongson1/clk-loongson1c.c
index 703f87622cf5..1ebf740380ef 100644
--- a/drivers/clk/loongson1/clk-loongson1c.c
+++ b/drivers/clk/loongson1/clk-loongson1c.c
@@ -37,6 +37,7 @@ static const struct clk_div_table ahb_div_table[] = {
[1] = { .val = 1, .div = 4 },
[2] = { .val = 2, .div = 3 },
[3] = { .val = 3, .div = 3 },
+ [4] = { /* sentinel */ }
};
void __init ls1x_clk_init(void)
--
2.34.1
> From: Theodore Ts'o <[email protected]>
>
> [ Upstream commit cc5095747edfb054ca2068d01af20be3fcc3634f ]
>
> [un]pin_user_pages_remote is dirtying pages without properly warning
> the file system in advance. A related race was noted by Jan Kara in
> 2018[1]; however, more recently instead of it being a very hard-to-hit
> race, it could be reliably triggered by process_vm_writev(2) which was
> discovered by Syzbot[2].
>
> This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
> that if some other kernel subsystem dirty pages without properly
> notifying the file system using page_mkwrite(), ext4 will BUG, while
> other file systems will not BUG (although data will still be lost).
>
> So instead of crashing with a BUG, issue a warning (since there may be
> potential data loss) and just mark the page as clean to avoid
> unprivileged denial of service attacks until the problem can be
> properly fixed. More discussion and background can be found in the
> thread starting at [2].
>
> [1] https://lore.kernel.org/linux-mm/[email protected]
> [2] https://lore.kernel.org/r/[email protected]
>
> Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
> Reported-by: Lee Jones <[email protected]>
> Signed-off-by: Theodore Ts'o <[email protected]>
> Link: https://lore.kernel.org/r/[email protected]
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> fs/ext4/inode.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 22a5140546fb..fff52292c01e 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -1992,6 +1992,15 @@ static int ext4_writepage(struct page *page,
> else
> len = PAGE_SIZE;
>
> + /* Should never happen but for bugs in other kernel subsystems */
> + if (!page_has_buffers(page)) {
> + ext4_warning_inode(inode,
> + "page %lu does not have buffers attached", page->index);
> + ClearPageDirty(page);
> + unlock_page(page);
> + return 0;
> + }
> +
> page_bufs = page_buffers(page);
> /*
> * We cannot do block allocation or other extent handling in this
> @@ -2595,6 +2604,22 @@ static int mpage_prepare_extent_to_map(struct mpage_da_data *mpd)
> wait_on_page_writeback(page);
> BUG_ON(PageWriteback(page));
>
> + /*
> + * Should never happen but for buggy code in
> + * other subsystems that call
> + * set_page_dirty() without properly warning
> + * the file system first. See [1] for more
> + * information.
> + *
> + * [1] https://lore.kernel.org/linux-mm/[email protected]
> + */
> + if (!page_has_buffers(page)) {
> + ext4_warning_inode(mpd->inode, "page %lu does not have buffers attached", page->index);
> + ClearPageDirty(page);
> + unlock_page(page);
> + continue;
> + }
> +
> if (mpd->map.m_len == 0)
> mpd->first_page = page->index;
> mpd->next_page = page->index + 1;
> --
> 2.34.1
>
>
>
I see the command but can't find the corresponding bug.
The email is sent to [email protected] address
but the HASH does not correspond to any known bug.
Please double check the address.
From: Pavel Skripkin <[email protected]>
[ Upstream commit 920a9fa27e7805499cfe78491b36fed2322c02ec ]
Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.
Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.
So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code.
Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Tested-by: Oleksij Rempel <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/asix.h | 4 ++--
drivers/net/usb/asix_common.c | 19 +++++++++++++------
drivers/net/usb/asix_devices.c | 21 ++++++++++++++++++---
3 files changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index 2a1e31defe71..4334aafab59a 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -192,8 +192,8 @@ extern const struct driver_info ax88172a_info;
/* ASIX specific flags */
#define FLAG_EEPROM_MAC (1UL << 0) /* init device MAC from eeprom */
-int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data, int in_pm);
+int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data, int in_pm);
int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data, int in_pm);
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 9aa92076500a..f39188b7717a 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -11,8 +11,8 @@
#define AX_HOST_EN_RETRIES 30
-int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data, int in_pm)
+int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data, int in_pm)
{
int ret;
int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
@@ -27,9 +27,12 @@ int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, data, size);
- if (unlikely(ret < 0))
+ if (unlikely(ret < size)) {
+ ret = ret < 0 ? ret : -ENODATA;
+
netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
index, ret);
+ }
return ret;
}
@@ -79,7 +82,7 @@ static int asix_check_host_enable(struct usbnet *dev, int in_pm)
0, 0, 1, &smsr, in_pm);
if (ret == -ENODEV)
break;
- else if (ret < sizeof(smsr))
+ else if (ret < 0)
continue;
else if (smsr & AX_HOST_EN)
break;
@@ -579,8 +582,12 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
return ret;
}
- asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
- (__u16)loc, 2, &res, 1);
+ ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+ (__u16)loc, 2, &res, 1);
+ if (ret < 0) {
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+ }
asix_set_hw_mii(dev, 1);
mutex_unlock(&dev->phy_mutex);
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 30821f6a6d7a..bd8f8619ad6f 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -755,7 +755,12 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
priv->phy_addr = ret;
priv->embd_phy = ((priv->phy_addr & 0x1f) == 0x10);
- asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+ ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret);
+ return ret;
+ }
+
chipcode &= AX_CHIPCODE_MASK;
ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
@@ -920,11 +925,21 @@ static int ax88178_reset(struct usbnet *dev)
int gpio0 = 0;
u32 phyid;
- asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
+ ret = asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret);
+ return ret;
+ }
+
netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
- asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+ ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret);
+ return ret;
+ }
+
asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
--
2.34.1
From: Prashant Malani <[email protected]>
commit ffebd90532728086007038986900426544e3df4e upstream.
The Type C ACPI device on older Chromebooks is not generated correctly
(since their EC firmware doesn't support the new commands required). In
such cases, the crafted ACPI device doesn't have an EC parent, and it is
therefore not useful (it shouldn't be generated in the first place since
the EC firmware doesn't support any of the Type C commands).
To handle devices which use these older firmware revisions, check for
the parent EC device handle, and fail the probe if it's not found.
Fixes: fdc6b21e2444 ("platform/chrome: Add Type C connector class driver")
Reported-by: Alyssa Ross <[email protected]>
Reviewed-by: Tzung-Bi Shih <[email protected]>
Signed-off-by: Prashant Malani <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Reviewed-by: Alyssa Ross <[email protected]>
Tested-by: Alyssa Ross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benson Leung <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/chrome/cros_ec_typec.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -1106,7 +1106,13 @@ static int cros_typec_probe(struct platf
return -ENOMEM;
typec->dev = dev;
+
typec->ec = dev_get_drvdata(pdev->dev.parent);
+ if (!typec->ec) {
+ dev_err(dev, "couldn't find parent EC device\n");
+ return -ENODEV;
+ }
+
platform_set_drvdata(pdev, typec);
ret = cros_typec_get_cmd_version(typec);
From: Xiaolong Huang <[email protected]>
commit ff8376ade4f668130385839cef586a0990f8ef87 upstream.
Some function calls are not implemented in rxrpc_no_security, there are
preparse_server_key, free_preparse_server_key and destroy_server_key.
When rxrpc security type is rxrpc_no_security, user can easily trigger a
null-ptr-deref bug via ioctl. So judgment should be added to prevent it
The crash log:
user@syzkaller:~$ ./rxrpc_preparse_s
[ 37.956878][T15626] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 37.957645][T15626] #PF: supervisor instruction fetch in kernel mode
[ 37.958229][T15626] #PF: error_code(0x0010) - not-present page
[ 37.958762][T15626] PGD 4aadf067 P4D 4aadf067 PUD 4aade067 PMD 0
[ 37.959321][T15626] Oops: 0010 [#1] PREEMPT SMP
[ 37.959739][T15626] CPU: 0 PID: 15626 Comm: rxrpc_preparse_ Not tainted 5.17.0-01442-gb47d5a4f6b8d #43
[ 37.960588][T15626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
[ 37.961474][T15626] RIP: 0010:0x0
[ 37.961787][T15626] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 37.962480][T15626] RSP: 0018:ffffc9000d9abdc0 EFLAGS: 00010286
[ 37.963018][T15626] RAX: ffffffff84335200 RBX: ffff888012a1ce80 RCX: 0000000000000000
[ 37.963727][T15626] RDX: 0000000000000000 RSI: ffffffff84a736dc RDI: ffffc9000d9abe48
[ 37.964425][T15626] RBP: ffffc9000d9abe48 R08: 0000000000000000 R09: 0000000000000002
[ 37.965118][T15626] R10: 000000000000000a R11: f000000000000000 R12: ffff888013145680
[ 37.965836][T15626] R13: 0000000000000000 R14: ffffffffffffffec R15: ffff8880432aba80
[ 37.966441][T15626] FS: 00007f2177907700(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[ 37.966979][T15626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 37.967384][T15626] CR2: ffffffffffffffd6 CR3: 000000004aaf1000 CR4: 00000000000006f0
[ 37.967864][T15626] Call Trace:
[ 37.968062][T15626] <TASK>
[ 37.968240][T15626] rxrpc_preparse_s+0x59/0x90
[ 37.968541][T15626] key_create_or_update+0x174/0x510
[ 37.968863][T15626] __x64_sys_add_key+0x139/0x1d0
[ 37.969165][T15626] do_syscall_64+0x35/0xb0
[ 37.969451][T15626] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 37.969824][T15626] RIP: 0033:0x43a1f9
Signed-off-by: Xiaolong Huang <[email protected]>
Tested-by: Xiaolong Huang <[email protected]>
Signed-off-by: David Howells <[email protected]>
Acked-by: Marc Dionne <[email protected]>
cc: [email protected]
Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005069.html
Fixes: 12da59fcab5a ("rxrpc: Hand server key parsing off to the security class")
Link: https://lore.kernel.org/r/164865013439.2941502.8966285221215590921.stgit@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/server_key.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/net/rxrpc/server_key.c
+++ b/net/rxrpc/server_key.c
@@ -84,6 +84,9 @@ static int rxrpc_preparse_s(struct key_p
prep->payload.data[1] = (struct rxrpc_security *)sec;
+ if (!sec->preparse_server_key)
+ return -EINVAL;
+
return sec->preparse_server_key(prep);
}
@@ -91,7 +94,7 @@ static void rxrpc_free_preparse_s(struct
{
const struct rxrpc_security *sec = prep->payload.data[1];
- if (sec)
+ if (sec && sec->free_preparse_server_key)
sec->free_preparse_server_key(prep);
}
@@ -99,7 +102,7 @@ static void rxrpc_destroy_s(struct key *
{
const struct rxrpc_security *sec = key->payload.data[1];
- if (sec)
+ if (sec && sec->destroy_server_key)
sec->destroy_server_key(key);
}
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 1fdbbfd5099f797a4dac05e7ef0192ba4a9c39b4 ]
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Fixes: 1c894225bf5b ("iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Nikita Yushchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/ipmmu-vmsa.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index d38ff29a76e8..96708cd2757f 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -982,7 +982,9 @@ static int ipmmu_probe(struct platform_device *pdev)
bitmap_zero(mmu->ctx, IPMMU_CTX_MAX);
mmu->features = of_device_get_match_data(&pdev->dev);
memset(mmu->utlb_ctx, IPMMU_CTX_INVALID, mmu->features->num_utlbs);
- dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+ if (ret)
+ return ret;
/* Map I/O memory and request IRQ. */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
2.34.1
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 0492d857636e1c52cd71594a723c4b26a7b31978 ]
nf_flow_offload_inet_hook() does not check for 802.1q and PPPoE.
Fetch inner ethertype from these encapsulation protocols.
Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Fixes: 4cd91f7c290f ("netfilter: flowtable: add vlan support")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/netfilter/nf_flow_table.h | 18 ++++++++++++++++++
net/netfilter/nf_flow_table_inet.c | 17 +++++++++++++++++
net/netfilter/nf_flow_table_ip.c | 18 ------------------
3 files changed, 35 insertions(+), 18 deletions(-)
diff --git a/include/net/netfilter/nf_flow_table.h b/include/net/netfilter/nf_flow_table.h
index a3647fadf1cc..9f927c44087d 100644
--- a/include/net/netfilter/nf_flow_table.h
+++ b/include/net/netfilter/nf_flow_table.h
@@ -10,6 +10,8 @@
#include <linux/netfilter/nf_conntrack_tuple_common.h>
#include <net/flow_offload.h>
#include <net/dst.h>
+#include <linux/if_pppox.h>
+#include <linux/ppp_defs.h>
struct nf_flowtable;
struct nf_flow_rule;
@@ -313,4 +315,20 @@ int nf_flow_rule_route_ipv6(struct net *net, const struct flow_offload *flow,
int nf_flow_table_offload_init(void);
void nf_flow_table_offload_exit(void);
+static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
+{
+ __be16 proto;
+
+ proto = *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
+ sizeof(struct pppoe_hdr)));
+ switch (proto) {
+ case htons(PPP_IP):
+ return htons(ETH_P_IP);
+ case htons(PPP_IPV6):
+ return htons(ETH_P_IPV6);
+ }
+
+ return 0;
+}
+
#endif /* _NF_FLOW_TABLE_H */
diff --git a/net/netfilter/nf_flow_table_inet.c b/net/netfilter/nf_flow_table_inet.c
index bc4126d8ef65..280fdd32965f 100644
--- a/net/netfilter/nf_flow_table_inet.c
+++ b/net/netfilter/nf_flow_table_inet.c
@@ -6,12 +6,29 @@
#include <linux/rhashtable.h>
#include <net/netfilter/nf_flow_table.h>
#include <net/netfilter/nf_tables.h>
+#include <linux/if_vlan.h>
static unsigned int
nf_flow_offload_inet_hook(void *priv, struct sk_buff *skb,
const struct nf_hook_state *state)
{
+ struct vlan_ethhdr *veth;
+ __be16 proto;
+
switch (skb->protocol) {
+ case htons(ETH_P_8021Q):
+ veth = (struct vlan_ethhdr *)skb_mac_header(skb);
+ proto = veth->h_vlan_encapsulated_proto;
+ break;
+ case htons(ETH_P_PPP_SES):
+ proto = nf_flow_pppoe_proto(skb);
+ break;
+ default:
+ proto = skb->protocol;
+ break;
+ }
+
+ switch (proto) {
case htons(ETH_P_IP):
return nf_flow_offload_ip_hook(priv, skb, state);
case htons(ETH_P_IPV6):
diff --git a/net/netfilter/nf_flow_table_ip.c b/net/netfilter/nf_flow_table_ip.c
index 889cf88d3dba..6257d87c3a56 100644
--- a/net/netfilter/nf_flow_table_ip.c
+++ b/net/netfilter/nf_flow_table_ip.c
@@ -8,8 +8,6 @@
#include <linux/ipv6.h>
#include <linux/netdevice.h>
#include <linux/if_ether.h>
-#include <linux/if_pppox.h>
-#include <linux/ppp_defs.h>
#include <net/ip.h>
#include <net/ipv6.h>
#include <net/ip6_route.h>
@@ -239,22 +237,6 @@ static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb,
return NF_STOLEN;
}
-static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
-{
- __be16 proto;
-
- proto = *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
- sizeof(struct pppoe_hdr)));
- switch (proto) {
- case htons(PPP_IP):
- return htons(ETH_P_IP);
- case htons(PPP_IPV6):
- return htons(ETH_P_IPV6);
- }
-
- return 0;
-}
-
static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto,
u32 *offset)
{
--
2.34.1
From: Yiqing Yao <[email protected]>
[ Upstream commit e610941c45bad75aa839af015c27d236ab6749e5 ]
[why]
pm sysfs should be writable in one VF mode as is in passthrough
[how]
do not remove write access on pm sysfs if device is in one VF mode
Fixes: 11c9cc95f818 ("amdgpu/pm: Make sysfs pm attributes as read-only for VFs")
Signed-off-by: Yiqing Yao <[email protected]>
Reviewed-by: Monk Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
index 640db5020ccc..6aaf1230655f 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
@@ -2117,8 +2117,8 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_
}
}
- /* setting should not be allowed from VF */
- if (amdgpu_sriov_vf(adev)) {
+ /* setting should not be allowed from VF if not in one VF mode */
+ if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev)) {
dev_attr->attr.mode &= ~S_IWUGO;
dev_attr->store = NULL;
}
--
2.34.1
From: Matthew Wilcox (Oracle) <[email protected]>
commit 3e3c658055c002900982513e289398a1aad4a488 upstream.
If there is already an entry present that is of order >= XA_CHUNK_SHIFT
when we call xas_create_range(), xas_create_range() will misinterpret
that entry as a node and dereference xa_node->parent, generally leading
to a crash that looks something like this:
general protection fault, probably for non-canonical address 0xdffffc0000000001:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 32 Comm: khugepaged Not tainted 5.17.0-rc8-syzkaller-00003-g56e337f2cf13 #0
RIP: 0010:xa_parent_locked include/linux/xarray.h:1207 [inline]
RIP: 0010:xas_create_range+0x2d9/0x6e0 lib/xarray.c:725
It's deterministically reproducable once you know what the problem is,
but producing it in a live kernel requires khugepaged to hit a race.
While the problem has been present since xas_create_range() was
introduced, I'm not aware of a way to hit it before the page cache was
converted to use multi-index entries.
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Reported-by: [email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/test_xarray.c | 22 ++++++++++++++++++++++
lib/xarray.c | 2 ++
2 files changed, 24 insertions(+)
--- a/lib/test_xarray.c
+++ b/lib/test_xarray.c
@@ -1463,6 +1463,25 @@ unlock:
XA_BUG_ON(xa, !xa_empty(xa));
}
+static noinline void check_create_range_5(struct xarray *xa,
+ unsigned long index, unsigned int order)
+{
+ XA_STATE_ORDER(xas, xa, index, order);
+ unsigned int i;
+
+ xa_store_order(xa, index, order, xa_mk_index(index), GFP_KERNEL);
+
+ for (i = 0; i < order + 10; i++) {
+ do {
+ xas_lock(&xas);
+ xas_create_range(&xas);
+ xas_unlock(&xas);
+ } while (xas_nomem(&xas, GFP_KERNEL));
+ }
+
+ xa_destroy(xa);
+}
+
static noinline void check_create_range(struct xarray *xa)
{
unsigned int order;
@@ -1490,6 +1509,9 @@ static noinline void check_create_range(
check_create_range_4(xa, (3U << order) + 1, order);
check_create_range_4(xa, (3U << order) - 1, order);
check_create_range_4(xa, (1U << 24) + 1, order);
+
+ check_create_range_5(xa, 0, order);
+ check_create_range_5(xa, (1U << order), order);
}
check_create_range_3();
--- a/lib/xarray.c
+++ b/lib/xarray.c
@@ -722,6 +722,8 @@ void xas_create_range(struct xa_state *x
for (;;) {
struct xa_node *node = xas->xa_node;
+ if (node->shift >= shift)
+ break;
xas->xa_node = xa_parent_locked(xas->xa, node);
xas->xa_offset = node->offset - 1;
if (node->offset != 0)
From: Bard Liao <[email protected]>
[ Upstream commit f67c0c0d3b9048d86ea6ae52e36a2b78c48f265d ]
Codecs with the same part id, manufacturer id and part id, but different
sdw version should be treated as different codecs. For example, rt711 and
rt711-sdca are different. So, we should match sdw version as well.
Reported-by: Reddy Muralidhar <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/hda.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index ef92cca7ae01..ddf70902e53c 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -1072,7 +1072,7 @@ static bool link_slaves_found(struct snd_sof_dev *sdev,
struct hdac_bus *bus = sof_to_bus(sdev);
struct sdw_intel_slave_id *ids = sdw->ids;
int num_slaves = sdw->num_slaves;
- unsigned int part_id, link_id, unique_id, mfg_id;
+ unsigned int part_id, link_id, unique_id, mfg_id, version;
int i, j, k;
for (i = 0; i < link->num_adr; i++) {
@@ -1082,12 +1082,14 @@ static bool link_slaves_found(struct snd_sof_dev *sdev,
mfg_id = SDW_MFG_ID(adr);
part_id = SDW_PART_ID(adr);
link_id = SDW_DISCO_LINK_ID(adr);
+ version = SDW_VERSION(adr);
for (j = 0; j < num_slaves; j++) {
/* find out how many identical parts were reported on that link */
if (ids[j].link_id == link_id &&
ids[j].id.part_id == part_id &&
- ids[j].id.mfg_id == mfg_id)
+ ids[j].id.mfg_id == mfg_id &&
+ ids[j].id.sdw_version == version)
reported_part_count++;
}
@@ -1096,21 +1098,24 @@ static bool link_slaves_found(struct snd_sof_dev *sdev,
if (ids[j].link_id != link_id ||
ids[j].id.part_id != part_id ||
- ids[j].id.mfg_id != mfg_id)
+ ids[j].id.mfg_id != mfg_id ||
+ ids[j].id.sdw_version != version)
continue;
/* find out how many identical parts are expected */
for (k = 0; k < link->num_adr; k++) {
u64 adr2 = link->adr_d[k].adr;
- unsigned int part_id2, link_id2, mfg_id2;
+ unsigned int part_id2, link_id2, mfg_id2, version2;
mfg_id2 = SDW_MFG_ID(adr2);
part_id2 = SDW_PART_ID(adr2);
link_id2 = SDW_DISCO_LINK_ID(adr2);
+ version2 = SDW_VERSION(adr2);
if (link_id2 == link_id &&
part_id2 == part_id &&
- mfg_id2 == mfg_id)
+ mfg_id2 == mfg_id &&
+ version2 == version)
expected_part_count++;
}
--
2.34.1
From: Kees Cook <[email protected]>
[ Upstream commit 27e9faf415dbf94af19b9c827842435edbc1fbbc ]
Since STRING_CST may not be NUL terminated, strncmp() was used for check
for equality. However, this may lead to mismatches for longer section
names where the start matches the tested-for string. Test for exact
equality by checking for the presences of NUL termination.
Cc: Alexander Popov <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/gcc-plugins/stackleak_plugin.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/scripts/gcc-plugins/stackleak_plugin.c b/scripts/gcc-plugins/stackleak_plugin.c
index e9db7dcb3e5f..b04aa8e91a41 100644
--- a/scripts/gcc-plugins/stackleak_plugin.c
+++ b/scripts/gcc-plugins/stackleak_plugin.c
@@ -429,6 +429,23 @@ static unsigned int stackleak_cleanup_execute(void)
return 0;
}
+/*
+ * STRING_CST may or may not be NUL terminated:
+ * https://gcc.gnu.org/onlinedocs/gccint/Constant-expressions.html
+ */
+static inline bool string_equal(tree node, const char *string, int length)
+{
+ if (TREE_STRING_LENGTH(node) < length)
+ return false;
+ if (TREE_STRING_LENGTH(node) > length + 1)
+ return false;
+ if (TREE_STRING_LENGTH(node) == length + 1 &&
+ TREE_STRING_POINTER(node)[length] != '\0')
+ return false;
+ return !memcmp(TREE_STRING_POINTER(node), string, length);
+}
+#define STRING_EQUAL(node, str) string_equal(node, str, strlen(str))
+
static bool stackleak_gate(void)
{
tree section;
@@ -438,13 +455,13 @@ static bool stackleak_gate(void)
if (section && TREE_VALUE(section)) {
section = TREE_VALUE(TREE_VALUE(section));
- if (!strncmp(TREE_STRING_POINTER(section), ".init.text", 10))
+ if (STRING_EQUAL(section, ".init.text"))
return false;
- if (!strncmp(TREE_STRING_POINTER(section), ".devinit.text", 13))
+ if (STRING_EQUAL(section, ".devinit.text"))
return false;
- if (!strncmp(TREE_STRING_POINTER(section), ".cpuinit.text", 13))
+ if (STRING_EQUAL(section, ".cpuinit.text"))
return false;
- if (!strncmp(TREE_STRING_POINTER(section), ".meminit.text", 13))
+ if (STRING_EQUAL(section, ".meminit.text"))
return false;
}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit f725d20579807a68afbe5dba69e78b8fa05f5ef0 ]
Fix the missing clk_disable_unprepare() before return
from rockchip_i2s_probe() in the error handling case.
Fixes: 01605ad12875 ("ASoC: rockchip-i2s: enable "hclk" for rockchip I2S controller")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/rockchip/rockchip_i2s.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 7e89f5b0c237..2880a0537646 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -717,19 +717,23 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
i2s->mclk = devm_clk_get(&pdev->dev, "i2s_clk");
if (IS_ERR(i2s->mclk)) {
dev_err(&pdev->dev, "Can't retrieve i2s master clock\n");
- return PTR_ERR(i2s->mclk);
+ ret = PTR_ERR(i2s->mclk);
+ goto err_clk;
}
regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- if (IS_ERR(regs))
- return PTR_ERR(regs);
+ if (IS_ERR(regs)) {
+ ret = PTR_ERR(regs);
+ goto err_clk;
+ }
i2s->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
&rockchip_i2s_regmap_config);
if (IS_ERR(i2s->regmap)) {
dev_err(&pdev->dev,
"Failed to initialise managed register map\n");
- return PTR_ERR(i2s->regmap);
+ ret = PTR_ERR(i2s->regmap);
+ goto err_clk;
}
i2s->bclk_ratio = 64;
@@ -769,7 +773,8 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
i2s_runtime_suspend(&pdev->dev);
err_pm_disable:
pm_runtime_disable(&pdev->dev);
-
+err_clk:
+ clk_disable_unprepare(i2s->hclk);
return ret;
}
--
2.34.1
From: David Stevens <[email protected]>
commit ee9d4097cc145dcaebedf6b113d17c91c21333a0 upstream.
Calling the iommu_dma_sync_*_for_cpu functions during unmap can cause
two copies out of the swiotlb buffer. Do the arch sync directly in
__iommu_dma_unmap_swiotlb instead to avoid this. This makes the call to
iommu_dma_sync_sg_for_cpu for untrusted devices in iommu_dma_unmap_sg no
longer necessary, so move that invocation later in the function.
Signed-off-by: David Stevens <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Cc: Mario Limonciello <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/dma-iommu.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -521,6 +521,9 @@ static void __iommu_dma_unmap_swiotlb(st
if (WARN_ON(!phys))
return;
+ if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && !dev_is_dma_coherent(dev))
+ arch_sync_dma_for_cpu(phys, size, dir);
+
__iommu_dma_unmap(dev, dma_addr, size);
if (unlikely(is_swiotlb_buffer(dev, phys)))
@@ -871,8 +874,6 @@ static dma_addr_t iommu_dma_map_page(str
static void iommu_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir, unsigned long attrs)
{
- if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
- iommu_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
__iommu_dma_unmap_swiotlb(dev, dma_handle, size, dir, attrs);
}
@@ -1089,14 +1090,14 @@ static void iommu_dma_unmap_sg(struct de
struct scatterlist *tmp;
int i;
- if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
- iommu_dma_sync_sg_for_cpu(dev, sg, nents, dir);
-
if (dev_is_untrusted(dev)) {
iommu_dma_unmap_sg_swiotlb(dev, sg, nents, dir, attrs);
return;
}
+ if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+ iommu_dma_sync_sg_for_cpu(dev, sg, nents, dir);
+
/*
* The scatterlist segments are mapped into a single
* contiguous IOVA allocation, so this is incredibly easy.
From: Baokun Li <[email protected]>
commit 3cbf0e392f173ba0ce425968c8374a6aa3e90f2e upstream.
Hulk Robot reported a KASAN report about use-after-free:
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0x13d/0x160
Read of size 8 at addr ffff888035e37d98 by task ubiattach/1385
[...]
Call Trace:
klist_dec_and_del+0xa7/0x4a0
klist_put+0xc7/0x1a0
device_del+0x4d4/0xed0
cdev_device_del+0x1a/0x80
ubi_attach_mtd_dev+0x2951/0x34b0 [ubi]
ctrl_cdev_ioctl+0x286/0x2f0 [ubi]
Allocated by task 1414:
device_add+0x60a/0x18b0
cdev_device_add+0x103/0x170
ubi_create_volume+0x1118/0x1a10 [ubi]
ubi_cdev_ioctl+0xb7f/0x1ba0 [ubi]
Freed by task 1385:
cdev_device_del+0x1a/0x80
ubi_remove_volume+0x438/0x6c0 [ubi]
ubi_cdev_ioctl+0xbf4/0x1ba0 [ubi]
[...]
==================================================================
The lock held by ctrl_cdev_ioctl is ubi_devices_mutex, but the lock held
by ubi_cdev_ioctl is ubi->device_mutex. Therefore, the two locks can be
concurrent.
ctrl_cdev_ioctl contains two operations: ubi_attach and ubi_detach.
ubi_detach is bug-free because it uses reference counting to prevent
concurrency. However, uif_init and uif_close in ubi_attach may race with
ubi_cdev_ioctl.
uif_init will race with ubi_cdev_ioctl as in the following stack.
cpu1 cpu2 cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
ubi_attach_mtd_dev
uif_init
ubi_cdev_ioctl
ubi_create_volume
cdev_device_add
ubi_add_volume
// sysfs exist
kill_volumes
ubi_cdev_ioctl
ubi_remove_volume
cdev_device_del
// first free
ubi_free_volume
cdev_del
// double free
cdev_device_del
And uif_close will race with ubi_cdev_ioctl as in the following stack.
cpu1 cpu2 cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
ubi_attach_mtd_dev
uif_init
ubi_cdev_ioctl
ubi_create_volume
cdev_device_add
ubi_debugfs_init_dev
//error goto out_uif;
uif_close
kill_volumes
ubi_cdev_ioctl
ubi_remove_volume
cdev_device_del
// first free
ubi_free_volume
// double free
The cause of this problem is that commit 714fb87e8bc0 make device
"available" before it becomes accessible via sysfs. Therefore, we
roll back the modification. We will fix the race condition between
ubi device creation and udev by removing ubi_get_device in
vol_attribute_show and dev_attribute_show.This avoids accessing
uninitialized ubi_devices[ubi_num].
ubi_get_device is used to prevent devices from being deleted during
sysfs execution. However, now kernfs ensures that devices will not
be deleted before all reference counting are released.
The key process is shown in the following stack.
device_del
device_remove_attrs
device_remove_groups
sysfs_remove_groups
sysfs_remove_group
remove_files
kernfs_remove_by_name
kernfs_remove_by_name_ns
__kernfs_remove
kernfs_drain
Fixes: 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/ubi/build.c | 9 +--------
drivers/mtd/ubi/vmt.c | 8 +-------
2 files changed, 2 insertions(+), 15 deletions(-)
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -351,9 +351,6 @@ static ssize_t dev_attribute_show(struct
* we still can use 'ubi->ubi_num'.
*/
ubi = container_of(dev, struct ubi_device, dev);
- ubi = ubi_get_device(ubi->ubi_num);
- if (!ubi)
- return -ENODEV;
if (attr == &dev_eraseblock_size)
ret = sprintf(buf, "%d\n", ubi->leb_size);
@@ -382,7 +379,6 @@ static ssize_t dev_attribute_show(struct
else
ret = -EINVAL;
- ubi_put_device(ubi);
return ret;
}
@@ -979,9 +975,6 @@ int ubi_attach_mtd_dev(struct mtd_info *
goto out_detach;
}
- /* Make device "available" before it becomes accessible via sysfs */
- ubi_devices[ubi_num] = ubi;
-
err = uif_init(ubi);
if (err)
goto out_detach;
@@ -1026,6 +1019,7 @@ int ubi_attach_mtd_dev(struct mtd_info *
wake_up_process(ubi->bgt_thread);
spin_unlock(&ubi->wl_lock);
+ ubi_devices[ubi_num] = ubi;
ubi_notify_all(ubi, UBI_VOLUME_ADDED, NULL);
return ubi_num;
@@ -1034,7 +1028,6 @@ out_debugfs:
out_uif:
uif_close(ubi);
out_detach:
- ubi_devices[ubi_num] = NULL;
ubi_wl_close(ubi);
ubi_free_all_volumes(ubi);
vfree(ubi->vtbl);
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -56,16 +56,11 @@ static ssize_t vol_attribute_show(struct
{
int ret;
struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
- struct ubi_device *ubi;
-
- ubi = ubi_get_device(vol->ubi->ubi_num);
- if (!ubi)
- return -ENODEV;
+ struct ubi_device *ubi = vol->ubi;
spin_lock(&ubi->volumes_lock);
if (!ubi->volumes[vol->vol_id]) {
spin_unlock(&ubi->volumes_lock);
- ubi_put_device(ubi);
return -ENODEV;
}
/* Take a reference to prevent volume removal */
@@ -103,7 +98,6 @@ static ssize_t vol_attribute_show(struct
vol->ref_count -= 1;
ubi_assert(vol->ref_count >= 0);
spin_unlock(&ubi->volumes_lock);
- ubi_put_device(ubi);
return ret;
}
From: Quinn Tran <[email protected]>
commit f3502e2e98a92981601edc3dadf4b0f43c79836b upstream.
Remove stale recovery code that prevents normal path recovery.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 1cbc0efcd9be ("scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 7 -------
1 file changed, 7 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2085,13 +2085,6 @@ qla24xx_handle_prli_done_event(struct sc
qla24xx_post_gpdb_work(vha, ea->fcport, 0);
break;
default:
- if ((ea->iop[0] == LSC_SCODE_ELS_REJECT) &&
- (ea->iop[1] == 0x50000)) { /* reson 5=busy expl:0x0 */
- set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
- ea->fcport->fw_login_state = DSC_LS_PLOGI_COMP;
- break;
- }
-
sp = ea->sp;
ql_dbg(ql_dbg_disc, vha, 0x2118,
"%s %d %8phC priority %s, fc4type %x prev try %s\n",
From: Liu Ying <[email protected]>
[ Upstream commit 3153fa38e38af566cf6454a03b1dbadaf6f323c0 ]
According to the comment of the function phy_mipi_dphy_get_default_config(),
it uses minimum D-PHY timings based on MIPI D-PHY specification. They are
derived from the valid ranges specified in Section 6.9, Table 14, Page 41
of the D-PHY specification (v1.2). The table 14 explicitly mentions that
the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE
parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and
'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that
the minimum values are 50000 picoseconds and @lpx picoseconds respectively.
Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is
less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx,
which hints the same minimum values.
Without this patch, the function phy_mipi_dphy_get_default_config()
wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx.
So, let's correct them to 50000 picoseconds and cfg->lpx respectively.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes: dddc97e82303 ("phy: dphy: Add configuration helpers")
Cc: Andrzej Hajda <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Guido Günther <[email protected]>
Signed-off-by: Liu Ying <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/phy-core-mipi-dphy.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index ccb4045685cd..929e86d6558e 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -64,10 +64,10 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui);
cfg->init = 100;
- cfg->lpx = 60000;
+ cfg->lpx = 50000;
cfg->ta_get = 5 * cfg->lpx;
cfg->ta_go = 4 * cfg->lpx;
- cfg->ta_sure = 2 * cfg->lpx;
+ cfg->ta_sure = cfg->lpx;
cfg->wakeup = 1000;
cfg->hs_clk_rate = hs_clk_rate;
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 583d18336abdfb1b355270289ff8f6a2608ba905 ]
Return -ENODEV instead of success on this error path.
Fixes: dd36a507c806 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20210816183930.GA2068@kili
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index bcc032c815dc..6d439ae7b50b 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -1489,8 +1489,10 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
while (!sband && i < NUM_NL80211_BANDS)
sband = mvm->hw->wiphy->bands[i++];
- if (WARN_ON_ONCE(!sband))
+ if (WARN_ON_ONCE(!sband)) {
+ ret = -ENODEV;
goto error;
+ }
chan = &sband->channels[0];
--
2.34.1
From: Tzung-Bi Shih <[email protected]>
[ Upstream commit 3667a037e50a31555276a7989435126e501f0f15 ]
Uses of_device_get_match_data() helper to clean some boilerplate code.
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 7 ++-----
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c | 7 ++-----
sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c | 7 ++-----
3 files changed, 6 insertions(+), 15 deletions(-)
diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index bda103211e0b..0ab8b050b305 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -685,7 +685,6 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
struct snd_soc_dai_link *dai_link;
struct mt8183_da7219_max98357_priv *priv;
struct pinctrl *pinctrl;
- const struct of_device_id *match;
int ret, i;
platform_node = of_parse_phandle(pdev->dev.of_node,
@@ -695,11 +694,9 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
return -EINVAL;
}
- match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
- if (!match || !match->data)
+ card = (struct snd_soc_card *)of_device_get_match_data(&pdev->dev);
+ if (!card)
return -EINVAL;
-
- card = (struct snd_soc_card *)match->data;
card->dev = &pdev->dev;
hdmi_codec = of_parse_phandle(pdev->dev.of_node,
diff --git a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
index c7b10c48c6c2..a56c1e87d564 100644
--- a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
@@ -637,7 +637,6 @@ mt8183_mt6358_ts3a227_max98357_dev_probe(struct platform_device *pdev)
struct device_node *platform_node, *ec_codec, *hdmi_codec;
struct snd_soc_dai_link *dai_link;
struct mt8183_mt6358_ts3a227_max98357_priv *priv;
- const struct of_device_id *match;
int ret, i;
platform_node = of_parse_phandle(pdev->dev.of_node,
@@ -647,11 +646,9 @@ mt8183_mt6358_ts3a227_max98357_dev_probe(struct platform_device *pdev)
return -EINVAL;
}
- match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
- if (!match || !match->data)
+ card = (struct snd_soc_card *)of_device_get_match_data(&pdev->dev);
+ if (!card)
return -EINVAL;
-
- card = (struct snd_soc_card *)match->data;
card->dev = &pdev->dev;
ec_codec = of_parse_phandle(pdev->dev.of_node, "mediatek,ec-codec", 0);
diff --git a/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c b/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
index 24a5d0adec1b..ab449d0e4e9b 100644
--- a/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
+++ b/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
@@ -1106,7 +1106,6 @@ static int mt8192_mt6359_dev_probe(struct platform_device *pdev)
struct device_node *platform_node, *hdmi_codec;
int ret, i;
struct snd_soc_dai_link *dai_link;
- const struct of_device_id *match;
struct mt8192_mt6359_priv *priv;
platform_node = of_parse_phandle(pdev->dev.of_node,
@@ -1116,11 +1115,9 @@ static int mt8192_mt6359_dev_probe(struct platform_device *pdev)
return -EINVAL;
}
- match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
- if (!match || !match->data)
+ card = (struct snd_soc_card *)of_device_get_match_data(&pdev->dev);
+ if (!card)
return -EINVAL;
-
- card = (struct snd_soc_card *)match->data;
card->dev = &pdev->dev;
hdmi_codec = of_parse_phandle(pdev->dev.of_node,
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit 60eb3b9c9f11206996f57cb89521824304b305ad upstream.
'ui->dirty' is not protected by 'ui_mutex' in function do_tmpfile() which
may race with ubifs_write_inode[wb_workfn] to access/update 'ui->dirty',
finally dirty space is released twice.
open(O_TMPFILE) wb_workfn
do_tmpfile
ubifs_budget_space(ino_req = { .dirtied_ino = 1})
d_tmpfile // mark inode(tmpfile) dirty
ubifs_jnl_update // without holding tmpfile's ui_mutex
mark_inode_clean(ui)
if (ui->dirty)
ubifs_release_dirty_inode_budget(ui) // release first time
ubifs_write_inode
mutex_lock(&ui->ui_mutex)
ubifs_release_dirty_inode_budget(ui)
// release second time
mutex_unlock(&ui->ui_mutex)
ui->dirty = 0
Run generic/476 can reproduce following message easily
(See reproducer in [Link]):
UBIFS error (ubi0:0 pid 2578): ubifs_assert_failed [ubifs]: UBIFS assert
failed: c->bi.dd_growth >= 0, in fs/ubifs/budget.c:554
UBIFS warning (ubi0:0 pid 2578): ubifs_ro_mode [ubifs]: switched to
read-only mode, error -22
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
ubifs_ro_mode+0x54/0x60 [ubifs]
ubifs_assert_failed+0x4b/0x80 [ubifs]
ubifs_release_budget+0x468/0x5a0 [ubifs]
ubifs_release_dirty_inode_budget+0x53/0x80 [ubifs]
ubifs_write_inode+0x121/0x1f0 [ubifs]
...
wb_workfn+0x283/0x7b0
Fix it by holding tmpfile ubifs inode lock during ubifs_jnl_update().
Similar problem exists in whiteout renaming, but previous fix("ubifs:
Rename whiteout atomically") has solved the problem.
Fixes: 474b93704f32163 ("ubifs: Implement O_TMPFILE")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214765
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 60 ++++++++++++++++++++++++++++-----------------------------
1 file changed, 30 insertions(+), 30 deletions(-)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -397,6 +397,32 @@ out_free:
return ERR_PTR(err);
}
+/**
+ * lock_2_inodes - a wrapper for locking two UBIFS inodes.
+ * @inode1: first inode
+ * @inode2: second inode
+ *
+ * We do not implement any tricks to guarantee strict lock ordering, because
+ * VFS has already done it for us on the @i_mutex. So this is just a simple
+ * wrapper function.
+ */
+static void lock_2_inodes(struct inode *inode1, struct inode *inode2)
+{
+ mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
+ mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
+}
+
+/**
+ * unlock_2_inodes - a wrapper for unlocking two UBIFS inodes.
+ * @inode1: first inode
+ * @inode2: second inode
+ */
+static void unlock_2_inodes(struct inode *inode1, struct inode *inode2)
+{
+ mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
+ mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
+}
+
static int ubifs_tmpfile(struct user_namespace *mnt_userns, struct inode *dir,
struct dentry *dentry, umode_t mode)
{
@@ -404,7 +430,7 @@ static int ubifs_tmpfile(struct user_nam
struct ubifs_info *c = dir->i_sb->s_fs_info;
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1};
struct ubifs_budget_req ino_req = { .dirtied_ino = 1 };
- struct ubifs_inode *ui, *dir_ui = ubifs_inode(dir);
+ struct ubifs_inode *ui;
int err, instantiated = 0;
struct fscrypt_name nm;
@@ -452,18 +478,18 @@ static int ubifs_tmpfile(struct user_nam
instantiated = 1;
mutex_unlock(&ui->ui_mutex);
- mutex_lock(&dir_ui->ui_mutex);
+ lock_2_inodes(dir, inode);
err = ubifs_jnl_update(c, dir, &nm, inode, 1, 0);
if (err)
goto out_cancel;
- mutex_unlock(&dir_ui->ui_mutex);
+ unlock_2_inodes(dir, inode);
ubifs_release_budget(c, &req);
return 0;
out_cancel:
- mutex_unlock(&dir_ui->ui_mutex);
+ unlock_2_inodes(dir, inode);
out_inode:
make_bad_inode(inode);
if (!instantiated)
@@ -690,32 +716,6 @@ static int ubifs_dir_release(struct inod
return 0;
}
-/**
- * lock_2_inodes - a wrapper for locking two UBIFS inodes.
- * @inode1: first inode
- * @inode2: second inode
- *
- * We do not implement any tricks to guarantee strict lock ordering, because
- * VFS has already done it for us on the @i_mutex. So this is just a simple
- * wrapper function.
- */
-static void lock_2_inodes(struct inode *inode1, struct inode *inode2)
-{
- mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
- mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
-}
-
-/**
- * unlock_2_inodes - a wrapper for unlocking two UBIFS inodes.
- * @inode1: first inode
- * @inode2: second inode
- */
-static void unlock_2_inodes(struct inode *inode1, struct inode *inode2)
-{
- mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
- mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
-}
-
static int ubifs_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *dentry)
{
From: Arun Easi <[email protected]>
commit 8ad4be3d15cf144b5834bdb00d5bbe4050938dc7 upstream.
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Arun Easi <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 15 +++++++++++++++
drivers/scsi/qla2xxx/qla_os.c | 5 +++++
2 files changed, 20 insertions(+)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -975,6 +975,9 @@ static void qla24xx_handle_gnl_done_even
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
}
break;
+ case ISP_CFG_NL:
+ qla24xx_fcport_handle_login(vha, fcport);
+ break;
default:
break;
}
@@ -1564,6 +1567,11 @@ static void qla_chk_n2n_b4_login(struct
u8 login = 0;
int rc;
+ ql_dbg(ql_dbg_disc, vha, 0x307b,
+ "%s %8phC DS %d LS %d lid %d retries=%d\n",
+ __func__, fcport->port_name, fcport->disc_state,
+ fcport->fw_login_state, fcport->loop_id, fcport->login_retry);
+
if (qla_tgt_mode_enabled(vha))
return;
@@ -5586,6 +5594,13 @@ qla2x00_configure_local_loop(scsi_qla_ho
memcpy(fcport->node_name, new_fcport->node_name,
WWN_SIZE);
fcport->scan_state = QLA_FCPORT_FOUND;
+ if (fcport->login_retry == 0) {
+ fcport->login_retry = vha->hw->login_retry_count;
+ ql_dbg(ql_dbg_disc, vha, 0x2135,
+ "Port login retry %8phN, lid 0x%04x retry cnt=%d.\n",
+ fcport->port_name, fcport->loop_id,
+ fcport->login_retry);
+ }
found++;
break;
}
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5518,6 +5518,11 @@ void qla2x00_relogin(struct scsi_qla_hos
ea.fcport = fcport;
qla24xx_handle_relogin_event(vha, &ea);
} else if (vha->hw->current_topology ==
+ ISP_CFG_NL &&
+ IS_QLA2XXX_MIDTYPE(vha->hw)) {
+ (void)qla24xx_fcport_handle_login(vha,
+ fcport);
+ } else if (vha->hw->current_topology ==
ISP_CFG_NL) {
fcport->login_retry--;
status =
From: Vitaly Kuznetsov <[email protected]>
commit 50e523dd79f6a856d793ce5711719abe27cffbf2 upstream.
'struct kvm_hv_hcall' has all the required information already,
there's no need to pass 'ex' additionally.
No functional change intended.
Cc: [email protected] # 5.14.x
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/hyperv.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1874,7 +1874,7 @@ static void kvm_send_ipi_to_many(struct
}
}
-static u64 kvm_hv_send_ipi(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc, bool ex)
+static u64 kvm_hv_send_ipi(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
{
struct kvm *kvm = vcpu->kvm;
struct hv_send_ipi_ex send_ipi_ex;
@@ -1888,7 +1888,7 @@ static u64 kvm_hv_send_ipi(struct kvm_vc
u32 vector;
bool all_cpus;
- if (!ex) {
+ if (hc->code == HVCALL_SEND_IPI) {
if (!hc->fast) {
if (unlikely(kvm_read_guest(kvm, hc->ingpa, &send_ipi,
sizeof(send_ipi))))
@@ -2278,14 +2278,14 @@ int kvm_hv_hypercall(struct kvm_vcpu *vc
ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
break;
}
- ret = kvm_hv_send_ipi(vcpu, &hc, false);
+ ret = kvm_hv_send_ipi(vcpu, &hc);
break;
case HVCALL_SEND_IPI_EX:
if (unlikely(hc.fast || hc.rep)) {
ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
break;
}
- ret = kvm_hv_send_ipi(vcpu, &hc, true);
+ ret = kvm_hv_send_ipi(vcpu, &hc);
break;
case HVCALL_POST_DEBUG_DATA:
case HVCALL_RETRIEVE_DEBUG_DATA:
From: Mark Rutland <[email protected]>
[ Upstream commit dc1b4df09acdca7a89806b28f235cd6d8dcd3d24 ]
Arnd reports that on 32-bit architectures, the fallbacks for
atomic64_read_acquire() and atomic64_set_release() are broken as they
use smp_load_acquire() and smp_store_release() respectively, which do
not work on types larger than the native word size.
Since those contain compiletime_assert_atomic_type(), any attempt to use
those fallbacks will result in a build-time error. e.g. with the
following added to arch/arm/kernel/setup.c:
| void test_atomic64(atomic64_t *v)
| {
| atomic64_set_release(v, 5);
| atomic64_read_acquire(v);
| }
The compiler will complain as follows:
| In file included from <command-line>:
| In function 'arch_atomic64_set_release',
| inlined from 'test_atomic64' at ./include/linux/atomic/atomic-instrumented.h:669:2:
| ././include/linux/compiler_types.h:346:38: error: call to '__compiletime_assert_9' declared with attribute error: Need native word sized stores/loads for atomicity.
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^
| ././include/linux/compiler_types.h:327:4: note: in definition of macro '__compiletime_assert'
| 327 | prefix ## suffix(); \
| | ^~~~~~
| ././include/linux/compiler_types.h:346:2: note: in expansion of macro '_compiletime_assert'
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^~~~~~~~~~~~~~~~~~~
| ././include/linux/compiler_types.h:349:2: note: in expansion of macro 'compiletime_assert'
| 349 | compiletime_assert(__native_word(t), \
| | ^~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:133:2: note: in expansion of macro 'compiletime_assert_atomic_type'
| 133 | compiletime_assert_atomic_type(*p); \
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:164:55: note: in expansion of macro '__smp_store_release'
| 164 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0)
| | ^~~~~~~~~~~~~~~~~~~
| ./include/linux/atomic/atomic-arch-fallback.h:1270:2: note: in expansion of macro 'smp_store_release'
| 1270 | smp_store_release(&(v)->counter, i);
| | ^~~~~~~~~~~~~~~~~
| make[2]: *** [scripts/Makefile.build:288: arch/arm/kernel/setup.o] Error 1
| make[1]: *** [scripts/Makefile.build:550: arch/arm/kernel] Error 2
| make: *** [Makefile:1831: arch/arm] Error 2
Fix this by only using smp_load_acquire() and smp_store_release() for
native atomic types, and otherwise falling back to the regular barriers
necessary for acquire/release semantics, as we do in the more generic
acquire and release fallbacks.
Since the fallback templates are used to generate the atomic64_*() and
atomic_*() operations, the __native_word() check is added to both. For
the atomic_*() operations, which are always 32-bit, the __native_word()
check is redundant but not harmful, as it is always true.
For the example above this works as expected on 32-bit, e.g. for arm
multi_v7_defconfig:
| <test_atomic64>:
| push {r4, r5}
| dmb ish
| pldw [r0]
| mov r2, #5
| mov r3, #0
| ldrexd r4, [r0]
| strexd r4, r2, [r0]
| teq r4, #0
| bne 484 <test_atomic64+0x14>
| ldrexd r2, [r0]
| dmb ish
| pop {r4, r5}
| bx lr
... and also on 64-bit, e.g. for arm64 defconfig:
| <test_atomic64>:
| bti c
| paciasp
| mov x1, #0x5
| stlr x1, [x0]
| ldar x0, [x0]
| autiasp
| ret
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/atomic/atomic-arch-fallback.h | 38 ++++++++++++++++++---
scripts/atomic/fallbacks/read_acquire | 11 +++++-
scripts/atomic/fallbacks/set_release | 7 +++-
3 files changed, 49 insertions(+), 7 deletions(-)
diff --git a/include/linux/atomic/atomic-arch-fallback.h b/include/linux/atomic/atomic-arch-fallback.h
index a3dba31df01e..6db58d180866 100644
--- a/include/linux/atomic/atomic-arch-fallback.h
+++ b/include/linux/atomic/atomic-arch-fallback.h
@@ -151,7 +151,16 @@
static __always_inline int
arch_atomic_read_acquire(const atomic_t *v)
{
- return smp_load_acquire(&(v)->counter);
+ int ret;
+
+ if (__native_word(atomic_t)) {
+ ret = smp_load_acquire(&(v)->counter);
+ } else {
+ ret = arch_atomic_read(v);
+ __atomic_acquire_fence();
+ }
+
+ return ret;
}
#define arch_atomic_read_acquire arch_atomic_read_acquire
#endif
@@ -160,7 +169,12 @@ arch_atomic_read_acquire(const atomic_t *v)
static __always_inline void
arch_atomic_set_release(atomic_t *v, int i)
{
- smp_store_release(&(v)->counter, i);
+ if (__native_word(atomic_t)) {
+ smp_store_release(&(v)->counter, i);
+ } else {
+ __atomic_release_fence();
+ arch_atomic_set(v, i);
+ }
}
#define arch_atomic_set_release arch_atomic_set_release
#endif
@@ -1258,7 +1272,16 @@ arch_atomic_dec_if_positive(atomic_t *v)
static __always_inline s64
arch_atomic64_read_acquire(const atomic64_t *v)
{
- return smp_load_acquire(&(v)->counter);
+ s64 ret;
+
+ if (__native_word(atomic64_t)) {
+ ret = smp_load_acquire(&(v)->counter);
+ } else {
+ ret = arch_atomic64_read(v);
+ __atomic_acquire_fence();
+ }
+
+ return ret;
}
#define arch_atomic64_read_acquire arch_atomic64_read_acquire
#endif
@@ -1267,7 +1290,12 @@ arch_atomic64_read_acquire(const atomic64_t *v)
static __always_inline void
arch_atomic64_set_release(atomic64_t *v, s64 i)
{
- smp_store_release(&(v)->counter, i);
+ if (__native_word(atomic64_t)) {
+ smp_store_release(&(v)->counter, i);
+ } else {
+ __atomic_release_fence();
+ arch_atomic64_set(v, i);
+ }
}
#define arch_atomic64_set_release arch_atomic64_set_release
#endif
@@ -2358,4 +2386,4 @@ arch_atomic64_dec_if_positive(atomic64_t *v)
#endif
#endif /* _LINUX_ATOMIC_FALLBACK_H */
-// cca554917d7ea73d5e3e7397dd70c484cad9b2c4
+// 8e2cc06bc0d2c0967d2f8424762bd48555ee40ae
diff --git a/scripts/atomic/fallbacks/read_acquire b/scripts/atomic/fallbacks/read_acquire
index 803ba7561076..a0ea1d26e6b2 100755
--- a/scripts/atomic/fallbacks/read_acquire
+++ b/scripts/atomic/fallbacks/read_acquire
@@ -2,6 +2,15 @@ cat <<EOF
static __always_inline ${ret}
arch_${atomic}_read_acquire(const ${atomic}_t *v)
{
- return smp_load_acquire(&(v)->counter);
+ ${int} ret;
+
+ if (__native_word(${atomic}_t)) {
+ ret = smp_load_acquire(&(v)->counter);
+ } else {
+ ret = arch_${atomic}_read(v);
+ __atomic_acquire_fence();
+ }
+
+ return ret;
}
EOF
diff --git a/scripts/atomic/fallbacks/set_release b/scripts/atomic/fallbacks/set_release
index 86ede759f24e..05cdb7f42477 100755
--- a/scripts/atomic/fallbacks/set_release
+++ b/scripts/atomic/fallbacks/set_release
@@ -2,6 +2,11 @@ cat <<EOF
static __always_inline void
arch_${atomic}_set_release(${atomic}_t *v, ${int} i)
{
- smp_store_release(&(v)->counter, i);
+ if (__native_word(${atomic}_t)) {
+ smp_store_release(&(v)->counter, i);
+ } else {
+ __atomic_release_fence();
+ arch_${atomic}_set(v, i);
+ }
}
EOF
--
2.34.1
From: Jonathan Cameron <[email protected]>
[ Upstream commit 74b0fe80409733055971bbfaf33c80a33fddeeb3 ]
In CXL 2.0, 8.2.5.1 CXL Capability Header Register: this register
is given as 32 bits.
8.2.3 which covers the CXL 2.0 Component registers, including the
CXL Capability Header Register states that access restrictions
specified in Section 8.2.2 apply.
8.2.2 includes:
* A 32 bit register shall be accessed as a 4 Byte quantity.
...
If these rules are not followed, the behavior is undefined.
Discovered during review of CXL QEMU emulation. Alex Bennée pointed
out there was a comment saying that 4 byte registers must be read
with a 4 byte read, but 8 byte reads were being emulated.
https://lore.kernel.org/qemu-devel/[email protected]/
Fixing that, led to this code failing. Whilst a given hardware
implementation 'might' work with an 8 byte read, it should not be relied
upon. The QEMU emulation v5 will return 0 and log the wrong access width.
The code moved, so one fixes tag for where this will directly apply and
also a reference to the earlier introduction of the code for backports.
Fixes: 0f06157e0135 ("cxl/core: Move register mapping infrastructure")
Fixes: 08422378c4ad ("cxl/pci: Add HDM decoder capabilities")
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Alex Bennée <[email protected]>
Reviewed-by: Ben Widawsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cxl/core/regs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index b8aa583a7642..2e7027a3fef3 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -35,7 +35,7 @@ void cxl_probe_component_regs(struct device *dev, void __iomem *base,
struct cxl_component_reg_map *map)
{
int cap, cap_count;
- u64 cap_array;
+ u32 cap_array;
*map = (struct cxl_component_reg_map) { 0 };
@@ -45,7 +45,7 @@ void cxl_probe_component_regs(struct device *dev, void __iomem *base,
*/
base += CXL_CM_OFFSET;
- cap_array = readq(base + CXL_CM_CAP_HDR_OFFSET);
+ cap_array = readl(base + CXL_CM_CAP_HDR_OFFSET);
if (FIELD_GET(CXL_CM_CAP_HDR_ID_MASK, cap_array) != CM_CAP_HDR_CAP_ID) {
dev_err(dev,
--
2.34.1
From: David Howells <[email protected]>
commit 4a7f62f91933c8ae5308f9127fd8ea48188b6bc3 upstream.
The rxrpc_call struct has a timer used to handle various timed events
relating to a call. This timer can get started from the packet input
routines that are run in softirq mode with just the RCU read lock held.
Unfortunately, because only the RCU read lock is held - and neither ref or
other lock is taken - the call can start getting destroyed at the same time
a packet comes in addressed to that call. This causes the timer - which
was already stopped - to get restarted. Later, the timer dispatch code may
then oops if the timer got deallocated first.
Fix this by trying to take a ref on the rxrpc_call struct and, if
successful, passing that ref along to the timer. If the timer was already
running, the ref is discarded.
The timer completion routine can then pass the ref along to the call's work
item when it queues it. If the timer or work item where already
queued/running, the extra ref is discarded.
Fixes: a158bdd3247b ("rxrpc: Fix call timeouts")
Reported-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Marc Dionne <[email protected]>
Tested-by: Marc Dionne <[email protected]>
cc: [email protected]
Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005073.html
Link: https://lore.kernel.org/r/164865115696.2943015.11097991776647323586.stgit@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/trace/events/rxrpc.h | 8 +++++++-
net/rxrpc/ar-internal.h | 15 +++++++--------
net/rxrpc/call_event.c | 2 +-
net/rxrpc/call_object.c | 40 +++++++++++++++++++++++++++++++++++-----
4 files changed, 50 insertions(+), 15 deletions(-)
--- a/include/trace/events/rxrpc.h
+++ b/include/trace/events/rxrpc.h
@@ -83,12 +83,15 @@ enum rxrpc_call_trace {
rxrpc_call_error,
rxrpc_call_got,
rxrpc_call_got_kernel,
+ rxrpc_call_got_timer,
rxrpc_call_got_userid,
rxrpc_call_new_client,
rxrpc_call_new_service,
rxrpc_call_put,
rxrpc_call_put_kernel,
rxrpc_call_put_noqueue,
+ rxrpc_call_put_notimer,
+ rxrpc_call_put_timer,
rxrpc_call_put_userid,
rxrpc_call_queued,
rxrpc_call_queued_ref,
@@ -278,12 +281,15 @@ enum rxrpc_tx_point {
EM(rxrpc_call_error, "*E*") \
EM(rxrpc_call_got, "GOT") \
EM(rxrpc_call_got_kernel, "Gke") \
+ EM(rxrpc_call_got_timer, "GTM") \
EM(rxrpc_call_got_userid, "Gus") \
EM(rxrpc_call_new_client, "NWc") \
EM(rxrpc_call_new_service, "NWs") \
EM(rxrpc_call_put, "PUT") \
EM(rxrpc_call_put_kernel, "Pke") \
- EM(rxrpc_call_put_noqueue, "PNQ") \
+ EM(rxrpc_call_put_noqueue, "PnQ") \
+ EM(rxrpc_call_put_notimer, "PnT") \
+ EM(rxrpc_call_put_timer, "PTM") \
EM(rxrpc_call_put_userid, "Pus") \
EM(rxrpc_call_queued, "QUE") \
EM(rxrpc_call_queued_ref, "QUR") \
--- a/net/rxrpc/ar-internal.h
+++ b/net/rxrpc/ar-internal.h
@@ -777,14 +777,12 @@ void rxrpc_propose_ACK(struct rxrpc_call
enum rxrpc_propose_ack_trace);
void rxrpc_process_call(struct work_struct *);
-static inline void rxrpc_reduce_call_timer(struct rxrpc_call *call,
- unsigned long expire_at,
- unsigned long now,
- enum rxrpc_timer_trace why)
-{
- trace_rxrpc_timer(call, why, now);
- timer_reduce(&call->timer, expire_at);
-}
+void rxrpc_reduce_call_timer(struct rxrpc_call *call,
+ unsigned long expire_at,
+ unsigned long now,
+ enum rxrpc_timer_trace why);
+
+void rxrpc_delete_call_timer(struct rxrpc_call *call);
/*
* call_object.c
@@ -808,6 +806,7 @@ void rxrpc_release_calls_on_socket(struc
bool __rxrpc_queue_call(struct rxrpc_call *);
bool rxrpc_queue_call(struct rxrpc_call *);
void rxrpc_see_call(struct rxrpc_call *);
+bool rxrpc_try_get_call(struct rxrpc_call *call, enum rxrpc_call_trace op);
void rxrpc_get_call(struct rxrpc_call *, enum rxrpc_call_trace);
void rxrpc_put_call(struct rxrpc_call *, enum rxrpc_call_trace);
void rxrpc_cleanup_call(struct rxrpc_call *);
--- a/net/rxrpc/call_event.c
+++ b/net/rxrpc/call_event.c
@@ -310,7 +310,7 @@ recheck_state:
}
if (call->state == RXRPC_CALL_COMPLETE) {
- del_timer_sync(&call->timer);
+ rxrpc_delete_call_timer(call);
goto out_put;
}
--- a/net/rxrpc/call_object.c
+++ b/net/rxrpc/call_object.c
@@ -53,10 +53,30 @@ static void rxrpc_call_timer_expired(str
if (call->state < RXRPC_CALL_COMPLETE) {
trace_rxrpc_timer(call, rxrpc_timer_expired, jiffies);
- rxrpc_queue_call(call);
+ __rxrpc_queue_call(call);
+ } else {
+ rxrpc_put_call(call, rxrpc_call_put);
+ }
+}
+
+void rxrpc_reduce_call_timer(struct rxrpc_call *call,
+ unsigned long expire_at,
+ unsigned long now,
+ enum rxrpc_timer_trace why)
+{
+ if (rxrpc_try_get_call(call, rxrpc_call_got_timer)) {
+ trace_rxrpc_timer(call, why, now);
+ if (timer_reduce(&call->timer, expire_at))
+ rxrpc_put_call(call, rxrpc_call_put_notimer);
}
}
+void rxrpc_delete_call_timer(struct rxrpc_call *call)
+{
+ if (del_timer_sync(&call->timer))
+ rxrpc_put_call(call, rxrpc_call_put_timer);
+}
+
static struct lock_class_key rxrpc_call_user_mutex_lock_class_key;
/*
@@ -463,6 +483,17 @@ void rxrpc_see_call(struct rxrpc_call *c
}
}
+bool rxrpc_try_get_call(struct rxrpc_call *call, enum rxrpc_call_trace op)
+{
+ const void *here = __builtin_return_address(0);
+ int n = atomic_fetch_add_unless(&call->usage, 1, 0);
+
+ if (n == 0)
+ return false;
+ trace_rxrpc_call(call->debug_id, op, n, here, NULL);
+ return true;
+}
+
/*
* Note the addition of a ref on a call.
*/
@@ -510,8 +541,7 @@ void rxrpc_release_call(struct rxrpc_soc
spin_unlock_bh(&call->lock);
rxrpc_put_call_slot(call);
-
- del_timer_sync(&call->timer);
+ rxrpc_delete_call_timer(call);
/* Make sure we don't get any more notifications */
write_lock_bh(&rx->recvmsg_lock);
@@ -618,6 +648,8 @@ static void rxrpc_destroy_call(struct wo
struct rxrpc_call *call = container_of(work, struct rxrpc_call, processor);
struct rxrpc_net *rxnet = call->rxnet;
+ rxrpc_delete_call_timer(call);
+
rxrpc_put_connection(call->conn);
rxrpc_put_peer(call->peer);
kfree(call->rxtx_buffer);
@@ -652,8 +684,6 @@ void rxrpc_cleanup_call(struct rxrpc_cal
memset(&call->sock_node, 0xcd, sizeof(call->sock_node));
- del_timer_sync(&call->timer);
-
ASSERTCMP(call->state, ==, RXRPC_CALL_COMPLETE);
ASSERT(test_bit(RXRPC_CALL_RELEASED, &call->flags));
From: Maíra Canal <[email protected]>
[ Upstream commit 3679b8518cd213c25d555553ef212e233faf698c ]
Remove the vupdate_int_entry definition and utilization to avoid the
following warning by Clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:410:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(0),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:404:2:
note: previous initialization is here
vupdate_int_entry(0),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:411:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(1),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:405:2:
note: previous initialization is here
vupdate_int_entry(1),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:412:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(2),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:406:2:
note: previous initialization is here
vupdate_int_entry(2),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:413:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(3),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:407:2:
note: previous initialization is here
vupdate_int_entry(3),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:414:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(4),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:408:2:
note: previous initialization is here
vupdate_int_entry(4),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:415:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(5),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:409:2:
note: previous initialization is here
vupdate_int_entry(5),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
6 warnings generated.
Fixes: 688f97ed3f5e ("drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1")
Signed-off-by: Maíra Canal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../amd/display/dc/irq/dcn21/irq_service_dcn21.c | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c b/drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c
index ed54e1c819be..a728087b3f3d 100644
--- a/drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c
+++ b/drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c
@@ -266,14 +266,6 @@ static const struct irq_source_info_funcs vline0_irq_info_funcs = {
.funcs = &pflip_irq_info_funcs\
}
-#define vupdate_int_entry(reg_num)\
- [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
- IRQ_REG_ENTRY(OTG, reg_num,\
- OTG_GLOBAL_SYNC_STATUS, VUPDATE_INT_EN,\
- OTG_GLOBAL_SYNC_STATUS, VUPDATE_EVENT_CLEAR),\
- .funcs = &vblank_irq_info_funcs\
- }
-
/* vupdate_no_lock_int_entry maps to DC_IRQ_SOURCE_VUPDATEx, to match semantic
* of DCE's DC_IRQ_SOURCE_VUPDATEx.
*/
@@ -402,12 +394,6 @@ irq_source_info_dcn21[DAL_IRQ_SOURCES_NUMBER] = {
dc_underflow_int_entry(6),
[DC_IRQ_SOURCE_DMCU_SCP] = dummy_irq_entry(),
[DC_IRQ_SOURCE_VBIOS_SW] = dummy_irq_entry(),
- vupdate_int_entry(0),
- vupdate_int_entry(1),
- vupdate_int_entry(2),
- vupdate_int_entry(3),
- vupdate_int_entry(4),
- vupdate_int_entry(5),
vupdate_no_lock_int_entry(0),
vupdate_no_lock_int_entry(1),
vupdate_no_lock_int_entry(2),
--
2.34.1
From: Hoang Le <[email protected]>
[ Upstream commit 6a7d8cff4a3301087dd139293e9bddcf63827282 ]
In the timer callback function tipc_sk_timeout(), we're trying to
reschedule another timeout to retransmit a setup request if destination
link is congested. But we use the incorrect timeout value
(msecs_to_jiffies(100)) instead of (jiffies + msecs_to_jiffies(100)),
so that the timer expires immediately, it's irrelevant for original
description.
In this commit we correct the timeout value in sk_reset_timer()
Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket")
Acked-by: Ying Xue <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/socket.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 7545321c3440..17f8c523e33b 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -2852,7 +2852,8 @@ static void tipc_sk_retry_connect(struct sock *sk, struct sk_buff_head *list)
/* Try again later if dest link is congested */
if (tsk->cong_link_cnt) {
- sk_reset_timer(sk, &sk->sk_timer, msecs_to_jiffies(100));
+ sk_reset_timer(sk, &sk->sk_timer,
+ jiffies + msecs_to_jiffies(100));
return;
}
/* Prepare SYN for retransmit */
--
2.34.1
From: Jaegeuk Kim <[email protected]>
[ Upstream commit ba900534f807f0b327c92d5141c85d2313e2d55c ]
Let's purge inode cache in order to avoid the below deadlock.
[freeze test] shrinkder
freeze_super
- pwercpu_down_write(SB_FREEZE_FS)
- super_cache_scan
- down_read(&sb->s_umount)
- prune_icache_sb
- dispose_list
- evict
- f2fs_evict_inode
thaw_super
- down_write(&sb->s_umount);
- __percpu_down_read(SB_FREEZE_FS)
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/ABI/testing/sysfs-fs-f2fs | 1 +
fs/f2fs/debug.c | 1 +
fs/f2fs/f2fs.h | 1 +
fs/f2fs/inode.c | 6 ++++--
fs/f2fs/super.c | 4 ++++
5 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index f627e705e663..48d41b669627 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -425,6 +425,7 @@ Description: Show status of f2fs superblock in real time.
0x800 SBI_QUOTA_SKIP_FLUSH skip flushing quota in current CP
0x1000 SBI_QUOTA_NEED_REPAIR quota file may be corrupted
0x2000 SBI_IS_RESIZEFS resizefs is in process
+ 0x4000 SBI_IS_FREEZING freefs is in process
====== ===================== =================================
What: /sys/fs/f2fs/<disk>/ckpt_thread_ioprio
diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c
index 8c50518475a9..07ad0d81f0c5 100644
--- a/fs/f2fs/debug.c
+++ b/fs/f2fs/debug.c
@@ -338,6 +338,7 @@ static char *s_flag[] = {
[SBI_QUOTA_SKIP_FLUSH] = " quota_skip_flush",
[SBI_QUOTA_NEED_REPAIR] = " quota_need_repair",
[SBI_IS_RESIZEFS] = " resizefs",
+ [SBI_IS_FREEZING] = " freezefs",
};
static int stat_show(struct seq_file *s, void *v)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index c68817d83a53..0a0fa1a64d06 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -1253,6 +1253,7 @@ enum {
SBI_QUOTA_SKIP_FLUSH, /* skip flushing quota in current CP */
SBI_QUOTA_NEED_REPAIR, /* quota file may be corrupted */
SBI_IS_RESIZEFS, /* resizefs is in process */
+ SBI_IS_FREEZING, /* freezefs is in process */
};
enum {
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 6488f5ff250c..2272000fb10b 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -769,7 +769,8 @@ void f2fs_evict_inode(struct inode *inode)
f2fs_remove_ino_entry(sbi, inode->i_ino, UPDATE_INO);
f2fs_remove_ino_entry(sbi, inode->i_ino, FLUSH_INO);
- sb_start_intwrite(inode->i_sb);
+ if (!is_sbi_flag_set(sbi, SBI_IS_FREEZING))
+ sb_start_intwrite(inode->i_sb);
set_inode_flag(inode, FI_NO_ALLOC);
i_size_write(inode, 0);
retry:
@@ -800,7 +801,8 @@ void f2fs_evict_inode(struct inode *inode)
if (dquot_initialize_needed(inode))
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
}
- sb_end_intwrite(inode->i_sb);
+ if (!is_sbi_flag_set(sbi, SBI_IS_FREEZING))
+ sb_end_intwrite(inode->i_sb);
no_delete:
dquot_drop(inode);
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 7b744ceb17a5..6dc66b7bc1f5 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1663,11 +1663,15 @@ static int f2fs_freeze(struct super_block *sb)
/* ensure no checkpoint required */
if (!llist_empty(&F2FS_SB(sb)->cprc_info.issue_list))
return -EINVAL;
+
+ /* to avoid deadlock on f2fs_evict_inode->SB_FREEZE_FS */
+ set_sbi_flag(F2FS_SB(sb), SBI_IS_FREEZING);
return 0;
}
static int f2fs_unfreeze(struct super_block *sb)
{
+ clear_sbi_flag(F2FS_SB(sb), SBI_IS_FREEZING);
return 0;
}
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 74c337ec0905d99111fc63a15f2e0784b9ed5503 ]
Similar to mt7915 driver, fix tag len error for sta_rec_wtbl, which
causes fw parsing error for the tags placed behind it.
Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index d25b50e76932..017bd59c4ea8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -295,7 +295,7 @@ mt76_connac_mcu_alloc_wtbl_req(struct mt76_dev *dev, struct mt76_wcid *wcid,
}
if (sta_hdr)
- sta_hdr->len = cpu_to_le16(sizeof(hdr));
+ le16_add_cpu(&sta_hdr->len, sizeof(hdr));
return skb_put_data(nskb, &hdr, sizeof(hdr));
}
--
2.34.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit dedab69fd650ea74710b2e626e63fd35584ef773 ]
Set em485->active_timer = NULL isn't always enough to take out the stop
timer. While there is a check that it acts in the right state (i.e.
waiting for RTS-after-send to pass after sending some chars) but the
following might happen:
- CPU1: some chars send, shifter becomes empty, stop tx timer armed
- CPU0: more chars send before RTS-after-send expired
- CPU0: shifter empty irq, port lock taken
- CPU1: tx timer triggers, waits for port lock
- CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(),
releases lock()
- CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer,
tear down RTS too early
This fix bases on research done by Steffen Trumtrar.
Fixes: b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode")
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_port.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index b470bc747b99..868ccb3e16cf 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1623,6 +1623,18 @@ static inline void start_tx_rs485(struct uart_port *port)
struct uart_8250_port *up = up_to_u8250p(port);
struct uart_8250_em485 *em485 = up->em485;
+ /*
+ * While serial8250_em485_handle_stop_tx() is a noop if
+ * em485->active_timer != &em485->stop_tx_timer, it might happen that
+ * the timer is still armed and triggers only after the current bunch of
+ * chars is send and em485->active_timer == &em485->stop_tx_timer again.
+ * So cancel the timer. There is still a theoretical race condition if
+ * the timer is already running and only comes around to check for
+ * em485->active_timer when &em485->stop_tx_timer is armed again.
+ */
+ if (em485->active_timer == &em485->stop_tx_timer)
+ hrtimer_try_to_cancel(&em485->stop_tx_timer);
+
em485->active_timer = NULL;
if (em485->tx_stopped) {
--
2.34.1
From: Akira Kawata <[email protected]>
[ Upstream commit 0da1d5002745cdc721bc018b582a8a9704d56c42 ]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197921
As pointed out in the discussion of buglink, we cannot calculate AT_PHDR
as the sum of load_addr and exec->e_phoff.
: The AT_PHDR of ELF auxiliary vectors should point to the memory address
: of program header. But binfmt_elf.c calculates this address as follows:
:
: NEW_AUX_ENT(AT_PHDR, load_addr + exec->e_phoff);
:
: which is wrong since e_phoff is the file offset of program header and
: load_addr is the memory base address from PT_LOAD entry.
:
: The ld.so uses AT_PHDR as the memory address of program header. In normal
: case, since the e_phoff is usually 64 and in the first PT_LOAD region, it
: is the correct program header address.
:
: But if the address of program header isn't equal to the first PT_LOAD
: address + e_phoff (e.g. Put the program header in other non-consecutive
: PT_LOAD region), ld.so will try to read program header from wrong address
: then crash or use incorrect program header.
This is because exec->e_phoff
is the offset of PHDRs in the file and the address of PHDRs in the
memory may differ from it. This patch fixes the bug by calculating the
address of program headers from PT_LOADs directly.
Signed-off-by: Akira Kawata <[email protected]>
Reported-by: kernel test robot <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
fs/binfmt_elf.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index a813b70f594e..3f6a7cac68fd 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -170,8 +170,8 @@ static int padzero(unsigned long elf_bss)
static int
create_elf_tables(struct linux_binprm *bprm, const struct elfhdr *exec,
- unsigned long load_addr, unsigned long interp_load_addr,
- unsigned long e_entry)
+ unsigned long interp_load_addr,
+ unsigned long e_entry, unsigned long phdr_addr)
{
struct mm_struct *mm = current->mm;
unsigned long p = bprm->p;
@@ -257,7 +257,7 @@ create_elf_tables(struct linux_binprm *bprm, const struct elfhdr *exec,
NEW_AUX_ENT(AT_HWCAP, ELF_HWCAP);
NEW_AUX_ENT(AT_PAGESZ, ELF_EXEC_PAGESIZE);
NEW_AUX_ENT(AT_CLKTCK, CLOCKS_PER_SEC);
- NEW_AUX_ENT(AT_PHDR, load_addr + exec->e_phoff);
+ NEW_AUX_ENT(AT_PHDR, phdr_addr);
NEW_AUX_ENT(AT_PHENT, sizeof(struct elf_phdr));
NEW_AUX_ENT(AT_PHNUM, exec->e_phnum);
NEW_AUX_ENT(AT_BASE, interp_load_addr);
@@ -823,7 +823,7 @@ static int parse_elf_properties(struct file *f, const struct elf_phdr *phdr,
static int load_elf_binary(struct linux_binprm *bprm)
{
struct file *interpreter = NULL; /* to shut gcc up */
- unsigned long load_addr = 0, load_bias = 0;
+ unsigned long load_addr, load_bias = 0, phdr_addr = 0;
int load_addr_set = 0;
unsigned long error;
struct elf_phdr *elf_ppnt, *elf_phdata, *interp_elf_phdata = NULL;
@@ -1156,6 +1156,17 @@ static int load_elf_binary(struct linux_binprm *bprm)
reloc_func_desc = load_bias;
}
}
+
+ /*
+ * Figure out which segment in the file contains the Program
+ * Header table, and map to the associated memory address.
+ */
+ if (elf_ppnt->p_offset <= elf_ex->e_phoff &&
+ elf_ex->e_phoff < elf_ppnt->p_offset + elf_ppnt->p_filesz) {
+ phdr_addr = elf_ex->e_phoff - elf_ppnt->p_offset +
+ elf_ppnt->p_vaddr;
+ }
+
k = elf_ppnt->p_vaddr;
if ((elf_ppnt->p_flags & PF_X) && k < start_code)
start_code = k;
@@ -1191,6 +1202,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
}
e_entry = elf_ex->e_entry + load_bias;
+ phdr_addr += load_bias;
elf_bss += load_bias;
elf_brk += load_bias;
start_code += load_bias;
@@ -1254,8 +1266,8 @@ static int load_elf_binary(struct linux_binprm *bprm)
goto out;
#endif /* ARCH_HAS_SETUP_ADDITIONAL_PAGES */
- retval = create_elf_tables(bprm, elf_ex,
- load_addr, interp_load_addr, e_entry);
+ retval = create_elf_tables(bprm, elf_ex, interp_load_addr,
+ e_entry, phdr_addr);
if (retval < 0)
goto out;
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 849ee6ac9dd3efd0a57cbc98b9a9d6ae87374aff ]
Fix mt7921_queues_acq implementation according to the vendor sdk.
Fixes: 474a9f21e2e20 ("mt76: mt7921: add debugfs support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c | 13 ++++++-------
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 11 +++++------
2 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
index 30f3b3085c78..8d5e261cd10f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
@@ -130,23 +130,22 @@ mt7921_queues_acq(struct seq_file *s, void *data)
mt7921_mutex_acquire(dev);
- for (i = 0; i < 16; i++) {
- int j, acs = i / 4, index = i % 4;
+ for (i = 0; i < 4; i++) {
u32 ctrl, val, qlen = 0;
+ int j;
- val = mt76_rr(dev, MT_PLE_AC_QEMPTY(acs, index));
- ctrl = BIT(31) | BIT(15) | (acs << 8);
+ val = mt76_rr(dev, MT_PLE_AC_QEMPTY(i));
+ ctrl = BIT(31) | BIT(11) | (i << 24);
for (j = 0; j < 32; j++) {
if (val & BIT(j))
continue;
- mt76_wr(dev, MT_PLE_FL_Q0_CTRL,
- ctrl | (j + (index << 5)));
+ mt76_wr(dev, MT_PLE_FL_Q0_CTRL, ctrl | j);
qlen += mt76_get_field(dev, MT_PLE_FL_Q3_CTRL,
GENMASK(11, 0));
}
- seq_printf(s, "AC%d%d: queued=%d\n", acs, index, qlen);
+ seq_printf(s, "AC%d: queued=%d\n", i, qlen);
}
mt7921_mutex_release(dev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
index 26fb11823762..41c2855e7a3d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
@@ -17,13 +17,12 @@
#define MT_PLE_BASE 0x8000
#define MT_PLE(ofs) (MT_PLE_BASE + (ofs))
-#define MT_PLE_FL_Q0_CTRL MT_PLE(0x1b0)
-#define MT_PLE_FL_Q1_CTRL MT_PLE(0x1b4)
-#define MT_PLE_FL_Q2_CTRL MT_PLE(0x1b8)
-#define MT_PLE_FL_Q3_CTRL MT_PLE(0x1bc)
+#define MT_PLE_FL_Q0_CTRL MT_PLE(0x3e0)
+#define MT_PLE_FL_Q1_CTRL MT_PLE(0x3e4)
+#define MT_PLE_FL_Q2_CTRL MT_PLE(0x3e8)
+#define MT_PLE_FL_Q3_CTRL MT_PLE(0x3ec)
-#define MT_PLE_AC_QEMPTY(ac, n) MT_PLE(0x300 + 0x10 * (ac) + \
- ((n) << 2))
+#define MT_PLE_AC_QEMPTY(_n) MT_PLE(0x500 + 0x40 * (_n))
#define MT_PLE_AMSDU_PACK_MSDU_CNT(n) MT_PLE(0x10e0 + ((n) << 2))
#define MT_MDP_BASE 0xf000
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit bc97f9c6f988b31b728eb47a94ca825401dbeffe ]
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Tested-by: Kiran Bhandare <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index e7e778ca074c..48f5319a3d41 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -248,13 +248,11 @@ static struct sk_buff *i40e_construct_skb_zc(struct i40e_ring *rx_ring,
struct sk_buff *skb;
/* allocate a skb to store the frags */
- skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
- xdp->data_end - xdp->data_hard_start,
+ skb = __napi_alloc_skb(&rx_ring->q_vector->napi, datasize,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
goto out;
- skb_reserve(skb, xdp->data - xdp->data_hard_start);
memcpy(__skb_put(skb, datasize), xdp->data, datasize);
if (metasize)
skb_metadata_set(skb, metasize);
--
2.34.1
From: Eric W. Biederman <[email protected]>
commit 9ec7d3230717b4fe9b6c7afeb4811909c23fa1d7 upstream.
Instead of individually passing cprm->siginfo and cprm->regs
into fill_note_info pass all of struct coredump_params.
This is preparation to allow fill_files_note to use the existing
vma snapshot.
Reviewed-by: Jann Horn <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_elf.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1799,7 +1799,7 @@ static int fill_thread_core_info(struct
static int fill_note_info(struct elfhdr *elf, int phdrs,
struct elf_note_info *info,
- const kernel_siginfo_t *siginfo, struct pt_regs *regs)
+ struct coredump_params *cprm)
{
struct task_struct *dump_task = current;
const struct user_regset_view *view = task_user_regset_view(dump_task);
@@ -1871,7 +1871,7 @@ static int fill_note_info(struct elfhdr
* Now fill in each thread's information.
*/
for (t = info->thread; t != NULL; t = t->next)
- if (!fill_thread_core_info(t, view, siginfo->si_signo, &info->size))
+ if (!fill_thread_core_info(t, view, cprm->siginfo->si_signo, &info->size))
return 0;
/*
@@ -1880,7 +1880,7 @@ static int fill_note_info(struct elfhdr
fill_psinfo(psinfo, dump_task->group_leader, dump_task->mm);
info->size += notesize(&info->psinfo);
- fill_siginfo_note(&info->signote, &info->csigdata, siginfo);
+ fill_siginfo_note(&info->signote, &info->csigdata, cprm->siginfo);
info->size += notesize(&info->signote);
fill_auxv_note(&info->auxv, current->mm);
@@ -2028,7 +2028,7 @@ static int elf_note_info_init(struct elf
static int fill_note_info(struct elfhdr *elf, int phdrs,
struct elf_note_info *info,
- const kernel_siginfo_t *siginfo, struct pt_regs *regs)
+ struct coredump_params *cprm)
{
struct core_thread *ct;
struct elf_thread_status *ets;
@@ -2049,13 +2049,13 @@ static int fill_note_info(struct elfhdr
list_for_each_entry(ets, &info->thread_list, list) {
int sz;
- sz = elf_dump_thread_status(siginfo->si_signo, ets);
+ sz = elf_dump_thread_status(cprm->siginfo->si_signo, ets);
info->thread_status_size += sz;
}
/* now collect the dump for the current */
memset(info->prstatus, 0, sizeof(*info->prstatus));
- fill_prstatus(&info->prstatus->common, current, siginfo->si_signo);
- elf_core_copy_regs(&info->prstatus->pr_reg, regs);
+ fill_prstatus(&info->prstatus->common, current, cprm->siginfo->si_signo);
+ elf_core_copy_regs(&info->prstatus->pr_reg, cprm->regs);
/* Set up header */
fill_elf_header(elf, phdrs, ELF_ARCH, ELF_CORE_EFLAGS);
@@ -2071,7 +2071,7 @@ static int fill_note_info(struct elfhdr
fill_note(info->notes + 1, "CORE", NT_PRPSINFO,
sizeof(*info->psinfo), info->psinfo);
- fill_siginfo_note(info->notes + 2, &info->csigdata, siginfo);
+ fill_siginfo_note(info->notes + 2, &info->csigdata, cprm->siginfo);
fill_auxv_note(info->notes + 3, current->mm);
info->numnote = 4;
@@ -2081,8 +2081,8 @@ static int fill_note_info(struct elfhdr
}
/* Try to dump the FPU. */
- info->prstatus->pr_fpvalid = elf_core_copy_task_fpregs(current, regs,
- info->fpu);
+ info->prstatus->pr_fpvalid =
+ elf_core_copy_task_fpregs(current, cprm->regs, info->fpu);
if (info->prstatus->pr_fpvalid)
fill_note(info->notes + info->numnote++,
"CORE", NT_PRFPREG, sizeof(*info->fpu), info->fpu);
@@ -2195,7 +2195,7 @@ static int elf_core_dump(struct coredump
* Collect all the non-memory information about the process for the
* notes. This also sets up the file header.
*/
- if (!fill_note_info(&elf, e_phnum, &info, cprm->siginfo, cprm->regs))
+ if (!fill_note_info(&elf, e_phnum, &info, cprm))
goto end_coredump;
has_dumped = 1;
From: Duoming Zhou <[email protected]>
[ Upstream commit 7781607938c8371d4c2b243527430241c62e39c2 ]
When the link layer is terminating, x25->neighbour will be set to NULL
in x25_disconnect(). As a result, it could cause null-ptr-deref bugs in
x25_sendmsg(),x25_recvmsg() and x25_connect(). One of the bugs is
shown below.
(Thread 1) | (Thread 2)
x25_link_terminated() | x25_recvmsg()
x25_kill_by_neigh() | ...
x25_disconnect() | lock_sock(sk)
... | ...
x25->neighbour = NULL //(1) |
... | x25->neighbour->extended //(2)
The code sets NULL to x25->neighbour in position (1) and dereferences
x25->neighbour in position (2), which could cause null-ptr-deref bug.
This patch adds lock_sock() in x25_kill_by_neigh() in order to synchronize
with x25_sendmsg(), x25_recvmsg() and x25_connect(). What`s more, the
sock held by lock_sock() is not NULL, because it is extracted from x25_list
and uses x25_list_lock to synchronize.
Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: Duoming Zhou <[email protected]>
Reviewed-by: Lin Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/x25/af_x25.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 3583354a7d7f..3a171828638b 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -1765,10 +1765,15 @@ void x25_kill_by_neigh(struct x25_neigh *nb)
write_lock_bh(&x25_list_lock);
- sk_for_each(s, &x25_list)
- if (x25_sk(s)->neighbour == nb)
+ sk_for_each(s, &x25_list) {
+ if (x25_sk(s)->neighbour == nb) {
+ write_unlock_bh(&x25_list_lock);
+ lock_sock(s);
x25_disconnect(s, ENETUNREACH, 0, 0);
-
+ release_sock(s);
+ write_lock_bh(&x25_list_lock);
+ }
+ }
write_unlock_bh(&x25_list_lock);
/* Remove any related forwards */
--
2.34.1
From: Cai Huoqing <[email protected]>
[ Upstream commit d4cb82aa2e4bc0e46582a625cb41b64c83fdde49 ]
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 3 +--
drivers/gpu/drm/meson/meson_dw_hdmi.c | 4 +---
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 62846af2f5e5..923377f856de 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -206,8 +206,7 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
priv->compat = match->compat;
priv->afbcd.ops = match->afbcd_ops;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vpu");
- regs = devm_ioremap_resource(dev, res);
+ regs = devm_platform_ioremap_resource_byname(pdev, "vpu");
if (IS_ERR(regs)) {
ret = PTR_ERR(regs);
goto free_drm;
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 2ed87cfdd735..0afbd1e70bfc 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -978,7 +978,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
struct dw_hdmi_plat_data *dw_plat_data;
struct drm_bridge *next_bridge;
struct drm_encoder *encoder;
- struct resource *res;
int irq;
int ret;
@@ -1042,8 +1041,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
return PTR_ERR(meson_dw_hdmi->hdmitx_phy);
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- meson_dw_hdmi->hdmitx = devm_ioremap_resource(dev, res);
+ meson_dw_hdmi->hdmitx = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(meson_dw_hdmi->hdmitx))
return PTR_ERR(meson_dw_hdmi->hdmitx);
--
2.34.1
From: Chuck Lever <[email protected]>
[ Upstream commit 50719bf3442dd6cd05159e9c98d020b3919ce978 ]
These have been incorrect since the function was introduced.
A proper kerneldoc comment is added since this function, though
static, is part of an external interface.
Reported-by: Dai Ngo <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfsd/nfs4state.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index db4a47a280dc..181bc3d9f566 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4693,6 +4693,14 @@ nfsd_break_deleg_cb(struct file_lock *fl)
return ret;
}
+/**
+ * nfsd_breaker_owns_lease - Check if lease conflict was resolved
+ * @fl: Lock state to check
+ *
+ * Return values:
+ * %true: Lease conflict was resolved
+ * %false: Lease conflict was not resolved.
+ */
static bool nfsd_breaker_owns_lease(struct file_lock *fl)
{
struct nfs4_delegation *dl = fl->fl_owner;
@@ -4700,11 +4708,11 @@ static bool nfsd_breaker_owns_lease(struct file_lock *fl)
struct nfs4_client *clp;
if (!i_am_nfsd())
- return NULL;
+ return false;
rqst = kthread_data(current);
/* Note rq_prog == NFS_ACL_PROGRAM is also possible: */
if (rqst->rq_prog != NFS_PROGRAM || rqst->rq_vers < 4)
- return NULL;
+ return false;
clp = *(rqst->rq_lease_breaker);
return dl->dl_stid.sc_client == clp;
}
--
2.34.1
From: Li RongQing <[email protected]>
commit c15e0ae42c8e5a61e9aca8aac920517cf7b3e94e upstream.
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/kvm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -510,7 +510,7 @@ static void __send_ipi_mask(const struct
} else if (apic_id < min && max - apic_id < KVM_IPI_CLUSTER_SIZE) {
ipi_bitmap <<= min - apic_id;
min = apic_id;
- } else if (apic_id < min + KVM_IPI_CLUSTER_SIZE) {
+ } else if (apic_id > min && apic_id < min + KVM_IPI_CLUSTER_SIZE) {
max = apic_id < max ? max : apic_id;
} else {
ret = kvm_hypercall4(KVM_HC_SEND_IPI, (unsigned long)ipi_bitmap,
From: Mike Marciniszyn <[email protected]>
[ Upstream commit b135e324d7a2e7fa0a7ef925076136e799b79f44 ]
The AIP code signals the phys_mtu in the following query_port()
fragment:
props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu :
ib_mtu_enum_to_int(props->max_mtu);
Using the largest MTU possible should not depend on AIP.
Fix by unconditionally using the hfi1_max_mtu value.
Fixes: 6d72344cf6c4 ("IB/ipoib: Increase ipoib Datagram mode MTU's upper limit")
Link: https://lore.kernel.org/r/1644348309-174874-1-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hfi1/verbs.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/verbs.c b/drivers/infiniband/hw/hfi1/verbs.c
index 26bea51869bf..ef8e0bdacb51 100644
--- a/drivers/infiniband/hw/hfi1/verbs.c
+++ b/drivers/infiniband/hw/hfi1/verbs.c
@@ -1397,8 +1397,7 @@ static int query_port(struct rvt_dev_info *rdi, u32 port_num,
4096 : hfi1_max_mtu), IB_MTU_4096);
props->active_mtu = !valid_ib_mtu(ppd->ibmtu) ? props->max_mtu :
mtu_to_enum(ppd->ibmtu, IB_MTU_4096);
- props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu :
- ib_mtu_enum_to_int(props->max_mtu);
+ props->phys_mtu = hfi1_max_mtu;
return 0;
}
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit 3b67db8a6ca83e6ff90b756d3da0c966f61cd37b upstream.
MM defined the rule [1] very clearly that once page was set with PG_private
flag, we should increment the refcount in that page, also main flows like
pageout(), migrate_page() will assume there is one additional page
reference count if page_has_private() returns true. Otherwise, we may
get a BUG in page migration:
page:0000000080d05b9d refcount:-1 mapcount:0 mapping:000000005f4d82a8
index:0xe2 pfn:0x14c12
aops:ubifs_file_address_operations [ubifs] ino:8f1 dentry name:"f30e"
flags: 0x1fffff80002405(locked|uptodate|owner_priv_1|private|node=0|
zone=1|lastcpupid=0x1fffff)
page dumped because: VM_BUG_ON_PAGE(page_count(page) != 0)
------------[ cut here ]------------
kernel BUG at include/linux/page_ref.h:184!
invalid opcode: 0000 [#1] SMP
CPU: 3 PID: 38 Comm: kcompactd0 Not tainted 5.15.0-rc5
RIP: 0010:migrate_page_move_mapping+0xac3/0xe70
Call Trace:
ubifs_migrate_page+0x22/0xc0 [ubifs]
move_to_new_page+0xb4/0x600
migrate_pages+0x1523/0x1cc0
compact_zone+0x8c5/0x14b0
kcompactd+0x2bc/0x560
kthread+0x18c/0x1e0
ret_from_fork+0x1f/0x30
Before the time, we should make clean a concept, what does refcount means
in page gotten from grab_cache_page_write_begin(). There are 2 situations:
Situation 1: refcount is 3, page is created by __page_cache_alloc.
TYPE_A - the write process is using this page
TYPE_B - page is assigned to one certain mapping by calling
__add_to_page_cache_locked()
TYPE_C - page is added into pagevec list corresponding current cpu by
calling lru_cache_add()
Situation 2: refcount is 2, page is gotten from the mapping's tree
TYPE_B - page has been assigned to one certain mapping
TYPE_A - the write process is using this page (by calling
page_cache_get_speculative())
Filesystem releases one refcount by calling put_page() in xxx_write_end(),
the released refcount corresponds to TYPE_A (write task is using it). If
there are any processes using a page, page migration process will skip the
page by judging whether expected_page_refs() equals to page refcount.
The BUG is caused by following process:
PA(cpu 0) kcompactd(cpu 1)
compact_zone
ubifs_write_begin
page_a = grab_cache_page_write_begin
add_to_page_cache_lru
lru_cache_add
pagevec_add // put page into cpu 0's pagevec
(refcnf = 3, for page creation process)
ubifs_write_end
SetPagePrivate(page_a) // doesn't increase page count !
unlock_page(page_a)
put_page(page_a) // refcnt = 2
[...]
PB(cpu 0)
filemap_read
filemap_get_pages
add_to_page_cache_lru
lru_cache_add
__pagevec_lru_add // traverse all pages in cpu 0's pagevec
__pagevec_lru_add_fn
SetPageLRU(page_a)
isolate_migratepages
isolate_migratepages_block
get_page_unless_zero(page_a)
// refcnt = 3
list_add(page_a, from_list)
migrate_pages(from_list)
__unmap_and_move
move_to_new_page
ubifs_migrate_page(page_a)
migrate_page_move_mapping
expected_page_refs get 3
(migration[1] + mapping[1] + private[1])
release_pages
put_page_testzero(page_a) // refcnt = 3
page_ref_freeze // refcnt = 0
page_ref_dec_and_test(0 - 1 = -1)
page_ref_unfreeze
VM_BUG_ON_PAGE(-1 != 0, page)
UBIFS doesn't increase the page refcount after setting private flag, which
leads to page migration task believes the page is not used by any other
processes, so the page is migrated. This causes concurrent accessing on
page refcount between put_page() called by other process(eg. read process
calls lru_cache_add) and page_ref_unfreeze() called by migration task.
Actually zhangjun has tried to fix this problem [2] by recalculating page
refcnt in ubifs_migrate_page(). It's better to follow MM rules [1], because
just like Kirill suggested in [2], we need to check all users of
page_has_private() helper. Like f2fs does in [3], fix it by adding/deleting
refcount when setting/clearing private for a page. BTW, according to [4],
we set 'page->private' as 1 because ubifs just simply SetPagePrivate().
And, [5] provided a common helper to set/clear page private, ubifs can
use this helper following the example of iomap, afs, btrfs, etc.
Jump [6] to find a reproducer.
[1] https://lore.kernel.org/lkml/[email protected]
[2] https://www.spinics.net/lists/linux-mtd/msg04018.html
[3] http://lkml.iu.edu/hypermail/linux/kernel/1903.0/03313.html
[4] https://lore.kernel.org/linux-f2fs-devel/[email protected]
[5] https://lore.kernel.org/all/[email protected]
[6] https://bugzilla.kernel.org/show_bug.cgi?id=214961
Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/file.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -570,7 +570,7 @@ static int ubifs_write_end(struct file *
}
if (!PagePrivate(page)) {
- SetPagePrivate(page);
+ attach_page_private(page, (void *)1);
atomic_long_inc(&c->dirty_pg_cnt);
__set_page_dirty_nobuffers(page);
}
@@ -947,7 +947,7 @@ static int do_writepage(struct page *pag
release_existing_page_budget(c);
atomic_long_dec(&c->dirty_pg_cnt);
- ClearPagePrivate(page);
+ detach_page_private(page);
ClearPageChecked(page);
kunmap(page);
@@ -1304,7 +1304,7 @@ static void ubifs_invalidatepage(struct
release_existing_page_budget(c);
atomic_long_dec(&c->dirty_pg_cnt);
- ClearPagePrivate(page);
+ detach_page_private(page);
ClearPageChecked(page);
}
@@ -1471,8 +1471,8 @@ static int ubifs_migrate_page(struct add
return rc;
if (PagePrivate(page)) {
- ClearPagePrivate(page);
- SetPagePrivate(newpage);
+ detach_page_private(page);
+ attach_page_private(newpage, (void *)1);
}
if (mode != MIGRATE_SYNC_NO_COPY)
@@ -1496,7 +1496,7 @@ static int ubifs_releasepage(struct page
return 0;
ubifs_assert(c, PagePrivate(page));
ubifs_assert(c, 0);
- ClearPagePrivate(page);
+ detach_page_private(page);
ClearPageChecked(page);
return 1;
}
@@ -1567,7 +1567,7 @@ static vm_fault_t ubifs_vm_page_mkwrite(
else {
if (!PageChecked(page))
ubifs_convert_page_budget(c);
- SetPagePrivate(page);
+ attach_page_private(page, (void *)1);
atomic_long_inc(&c->dirty_pg_cnt);
__set_page_dirty_nobuffers(page);
}
From: Waiman Long <[email protected]>
[ Upstream commit fb7275acd6fb988313dddd8d3d19efa70d9015ad ]
When dumping lock_classes information via /proc/lockdep, we can't take
the lockdep lock as the lock hold time is indeterminate. Iterating
over all_lock_classes without holding lock can be dangerous as there
is a slight chance that it may branch off to other lists leading to
infinite loop or even access invalid memory if changes are made to
all_lock_classes list in parallel.
To avoid this problem, iteration of lock classes is now done directly
on the lock_classes array itself. The lock_classes_in_use bitmap is
checked to see if the lock class is being used. To avoid iterating
the full array all the times, a new max_lock_class_idx value is added
to track the maximum lock_class index that is currently being used.
We can theoretically take the lockdep lock for iterating all_lock_classes
when other lockdep files (lockdep_stats and lock_stat) are accessed as
the lock hold time will be shorter for them. For consistency, they are
also modified to iterate the lock_classes array directly.
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 14 +++++---
kernel/locking/lockdep_internals.h | 6 ++--
kernel/locking/lockdep_proc.c | 51 +++++++++++++++++++++++++-----
3 files changed, 56 insertions(+), 15 deletions(-)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 57907bdb85ff..a30702b847ba 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -183,11 +183,9 @@ static DECLARE_BITMAP(list_entries_in_use, MAX_LOCKDEP_ENTRIES);
static struct hlist_head lock_keys_hash[KEYHASH_SIZE];
unsigned long nr_lock_classes;
unsigned long nr_zapped_classes;
-#ifndef CONFIG_DEBUG_LOCKDEP
-static
-#endif
+unsigned long max_lock_class_idx;
struct lock_class lock_classes[MAX_LOCKDEP_KEYS];
-static DECLARE_BITMAP(lock_classes_in_use, MAX_LOCKDEP_KEYS);
+DECLARE_BITMAP(lock_classes_in_use, MAX_LOCKDEP_KEYS);
static inline struct lock_class *hlock_class(struct held_lock *hlock)
{
@@ -338,7 +336,7 @@ static inline void lock_release_holdtime(struct held_lock *hlock)
* elements. These elements are linked together by the lock_entry member in
* struct lock_class.
*/
-LIST_HEAD(all_lock_classes);
+static LIST_HEAD(all_lock_classes);
static LIST_HEAD(free_lock_classes);
/**
@@ -1240,6 +1238,7 @@ register_lock_class(struct lockdep_map *lock, unsigned int subclass, int force)
struct lockdep_subclass_key *key;
struct hlist_head *hash_head;
struct lock_class *class;
+ int idx;
DEBUG_LOCKS_WARN_ON(!irqs_disabled());
@@ -1305,6 +1304,9 @@ register_lock_class(struct lockdep_map *lock, unsigned int subclass, int force)
* of classes.
*/
list_move_tail(&class->lock_entry, &all_lock_classes);
+ idx = class - lock_classes;
+ if (idx > max_lock_class_idx)
+ max_lock_class_idx = idx;
if (verbose(class)) {
graph_unlock();
@@ -5986,6 +5988,8 @@ static void zap_class(struct pending_free *pf, struct lock_class *class)
WRITE_ONCE(class->name, NULL);
nr_lock_classes--;
__clear_bit(class - lock_classes, lock_classes_in_use);
+ if (class - lock_classes == max_lock_class_idx)
+ max_lock_class_idx--;
} else {
WARN_ONCE(true, "%s() failed for class %s\n", __func__,
class->name);
diff --git a/kernel/locking/lockdep_internals.h b/kernel/locking/lockdep_internals.h
index ecb8662e7a4e..bbe9000260d0 100644
--- a/kernel/locking/lockdep_internals.h
+++ b/kernel/locking/lockdep_internals.h
@@ -121,7 +121,6 @@ static const unsigned long LOCKF_USED_IN_IRQ_READ =
#define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5)
-extern struct list_head all_lock_classes;
extern struct lock_chain lock_chains[];
#define LOCK_USAGE_CHARS (2*XXX_LOCK_USAGE_STATES + 1)
@@ -151,6 +150,10 @@ extern unsigned int nr_large_chain_blocks;
extern unsigned int max_lockdep_depth;
extern unsigned int max_bfs_queue_depth;
+extern unsigned long max_lock_class_idx;
+
+extern struct lock_class lock_classes[MAX_LOCKDEP_KEYS];
+extern unsigned long lock_classes_in_use[];
#ifdef CONFIG_PROVE_LOCKING
extern unsigned long lockdep_count_forward_deps(struct lock_class *);
@@ -205,7 +208,6 @@ struct lockdep_stats {
};
DECLARE_PER_CPU(struct lockdep_stats, lockdep_stats);
-extern struct lock_class lock_classes[MAX_LOCKDEP_KEYS];
#define __debug_atomic_inc(ptr) \
this_cpu_inc(lockdep_stats.ptr);
diff --git a/kernel/locking/lockdep_proc.c b/kernel/locking/lockdep_proc.c
index b8d9a050c337..15fdc7fa5c68 100644
--- a/kernel/locking/lockdep_proc.c
+++ b/kernel/locking/lockdep_proc.c
@@ -24,14 +24,33 @@
#include "lockdep_internals.h"
+/*
+ * Since iteration of lock_classes is done without holding the lockdep lock,
+ * it is not safe to iterate all_lock_classes list directly as the iteration
+ * may branch off to free_lock_classes or the zapped list. Iteration is done
+ * directly on the lock_classes array by checking the lock_classes_in_use
+ * bitmap and max_lock_class_idx.
+ */
+#define iterate_lock_classes(idx, class) \
+ for (idx = 0, class = lock_classes; idx <= max_lock_class_idx; \
+ idx++, class++)
+
static void *l_next(struct seq_file *m, void *v, loff_t *pos)
{
- return seq_list_next(v, &all_lock_classes, pos);
+ struct lock_class *class = v;
+
+ ++class;
+ *pos = class - lock_classes;
+ return (*pos > max_lock_class_idx) ? NULL : class;
}
static void *l_start(struct seq_file *m, loff_t *pos)
{
- return seq_list_start_head(&all_lock_classes, *pos);
+ unsigned long idx = *pos;
+
+ if (idx > max_lock_class_idx)
+ return NULL;
+ return lock_classes + idx;
}
static void l_stop(struct seq_file *m, void *v)
@@ -57,14 +76,16 @@ static void print_name(struct seq_file *m, struct lock_class *class)
static int l_show(struct seq_file *m, void *v)
{
- struct lock_class *class = list_entry(v, struct lock_class, lock_entry);
+ struct lock_class *class = v;
struct lock_list *entry;
char usage[LOCK_USAGE_CHARS];
+ int idx = class - lock_classes;
- if (v == &all_lock_classes) {
+ if (v == lock_classes)
seq_printf(m, "all lock classes:\n");
+
+ if (!test_bit(idx, lock_classes_in_use))
return 0;
- }
seq_printf(m, "%p", class->key);
#ifdef CONFIG_DEBUG_LOCKDEP
@@ -220,8 +241,11 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
#ifdef CONFIG_PROVE_LOCKING
struct lock_class *class;
+ unsigned long idx;
- list_for_each_entry(class, &all_lock_classes, lock_entry) {
+ iterate_lock_classes(idx, class) {
+ if (!test_bit(idx, lock_classes_in_use))
+ continue;
if (class->usage_mask == 0)
nr_unused++;
@@ -254,6 +278,7 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
sum_forward_deps += lockdep_count_forward_deps(class);
}
+
#ifdef CONFIG_DEBUG_LOCKDEP
DEBUG_LOCKS_WARN_ON(debug_atomic_read(nr_unused_locks) != nr_unused);
#endif
@@ -345,6 +370,8 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
seq_printf(m, " max bfs queue depth: %11u\n",
max_bfs_queue_depth);
#endif
+ seq_printf(m, " max lock class index: %11lu\n",
+ max_lock_class_idx);
lockdep_stats_debug_show(m);
seq_printf(m, " debug_locks: %11u\n",
debug_locks);
@@ -622,12 +649,16 @@ static int lock_stat_open(struct inode *inode, struct file *file)
if (!res) {
struct lock_stat_data *iter = data->stats;
struct seq_file *m = file->private_data;
+ unsigned long idx;
- list_for_each_entry(class, &all_lock_classes, lock_entry) {
+ iterate_lock_classes(idx, class) {
+ if (!test_bit(idx, lock_classes_in_use))
+ continue;
iter->class = class;
iter->stats = lock_stats(class);
iter++;
}
+
data->iter_end = iter;
sort(data->stats, data->iter_end - data->stats,
@@ -645,6 +676,7 @@ static ssize_t lock_stat_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct lock_class *class;
+ unsigned long idx;
char c;
if (count) {
@@ -654,8 +686,11 @@ static ssize_t lock_stat_write(struct file *file, const char __user *buf,
if (c != '0')
return count;
- list_for_each_entry(class, &all_lock_classes, lock_entry)
+ iterate_lock_classes(idx, class) {
+ if (!test_bit(idx, lock_classes_in_use))
+ continue;
clear_lock_stats(class);
+ }
}
return count;
}
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit c3b2f911ac11892b672df7829becf28d3a830073 ]
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-bcm2835.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index ad3b124a2e37..5149454eef4a 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -407,7 +407,7 @@ static const struct i2c_adapter_quirks bcm2835_i2c_quirks = {
static int bcm2835_i2c_probe(struct platform_device *pdev)
{
struct bcm2835_i2c_dev *i2c_dev;
- struct resource *mem, *irq;
+ struct resource *mem;
int ret;
struct i2c_adapter *adap;
struct clk *mclk;
@@ -457,12 +457,9 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
return ret;
}
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
- dev_err(&pdev->dev, "No IRQ resource\n");
- return -ENODEV;
- }
- i2c_dev->irq = irq->start;
+ i2c_dev->irq = platform_get_irq(pdev, 0);
+ if (i2c_dev->irq < 0)
+ return i2c_dev->irq;
ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED,
dev_name(&pdev->dev), i2c_dev);
--
2.34.1
From: Zhenzhong Duan <[email protected]>
[ Upstream commit f66af9f222f08d5b11ea41c1bd6c07a0f12daa07 ]
In emulation of writing to cr8, one of the lowest four bits in TPR[3:0]
is kept.
According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";
and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into
bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are
cleared.";
and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the
current sub-priority to be used when arbitrating lowest-priority messages.
This field is written with zero when TPR is written using the architectural
CR8 register.";
so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior
as in other scenarios.
This doesn't impact evaluation and delivery of pending virtual interrupts
because processor does not use the processor-priority sub-class to
determine which interrupts to delivery and which to inhibit.
Sub-class is used by hardware to arbitrate lowest priority interrupts,
but KVM just does a round-robin style delivery.
Fixes: b93463aa59d6 ("KVM: Accelerated apic support")
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/lapic.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 91c2dc9f198d..d790337613aa 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2242,10 +2242,7 @@ void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data)
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
{
- struct kvm_lapic *apic = vcpu->arch.apic;
-
- apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
- | (kvm_lapic_get_reg(apic, APIC_TASKPRI) & 4));
+ apic_set_tpr(vcpu->arch.apic, (cr8 & 0x0f) << 4);
}
u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 09e7af76db02c74f2a339b3cb2d95460fa2ddbe4 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: bbce5802afc5 ("davinci: mmc: updates to suspend/resume implementation")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/davinci_mmc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 2a757c88f9d2..80de660027d8 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -1375,8 +1375,12 @@ static int davinci_mmcsd_suspend(struct device *dev)
static int davinci_mmcsd_resume(struct device *dev)
{
struct mmc_davinci_host *host = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_enable(host->clk);
+ if (ret)
+ return ret;
- clk_enable(host->clk);
mmc_davinci_reset_ctrl(host, 0);
return 0;
--
2.34.1
From: Jiri Slaby <[email protected]>
[ Upstream commit cd3a4907ee334b40d7aa880c7ab310b154fd5cd4 ]
When LSR is 0xff in ->activate() (rather unlike), we return an error.
Provided ->shutdown() is not called when ->activate() fails, nothing
actually frees the buffer in this case.
Fix this by properly freeing the buffer in a designated label. We jump
there also from the "!info->type" if now too.
Fixes: 6769140d3047 ("tty: mxser: use the tty_port_open method")
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/mxser.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index da375851af4e..3b3e169c1f69 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -711,6 +711,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
struct mxser_port *info = container_of(port, struct mxser_port, port);
unsigned long page;
unsigned long flags;
+ int ret;
page = __get_free_page(GFP_KERNEL);
if (!page)
@@ -720,9 +721,9 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
if (!info->type) {
set_bit(TTY_IO_ERROR, &tty->flags);
- free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
- return 0;
+ ret = 0;
+ goto err_free_xmit;
}
info->port.xmit_buf = (unsigned char *) page;
@@ -748,8 +749,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
if (capable(CAP_SYS_ADMIN)) {
set_bit(TTY_IO_ERROR, &tty->flags);
return 0;
- } else
- return -ENODEV;
+ }
+
+ ret = -ENODEV;
+ goto err_free_xmit;
}
/*
@@ -794,6 +797,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
spin_unlock_irqrestore(&info->slock, flags);
return 0;
+err_free_xmit:
+ free_page(page);
+ info->port.xmit_buf = NULL;
+ return ret;
}
/*
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit d5c5e78f217172e87d8fb2c3418dd8b58b4adfcb ]
Add missing calls to dpu_hw_dspp_destroy() to free resources allocated
for DSPP hardware blocks.
Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index f9c83d6e427a..24fbaf562d41 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -35,6 +35,14 @@ int dpu_rm_destroy(struct dpu_rm *rm)
{
int i;
+ for (i = 0; i < ARRAY_SIZE(rm->dspp_blks); i++) {
+ struct dpu_hw_dspp *hw;
+
+ if (rm->dspp_blks[i]) {
+ hw = to_dpu_hw_dspp(rm->dspp_blks[i]);
+ dpu_hw_dspp_destroy(hw);
+ }
+ }
for (i = 0; i < ARRAY_SIZE(rm->pingpong_blks); i++) {
struct dpu_hw_pingpong *hw;
--
2.34.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 5b5ab1bfa1898c6d52936a57c25c5ceba2cb2f87 ]
The pointer temp is allocated by devm_kzalloc(), so it should be
checked for error handling.
Fixes: 7ec944538dde ("memory: emif: add basic infrastructure for EMIF driver")
Signed-off-by: Jia-Ju Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/emif.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index d4d4044e05b3..ecc78d6f89ed 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -1025,7 +1025,7 @@ static struct emif_data *__init_or_module get_device_details(
temp = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
- if (!emif || !pd || !dev_info) {
+ if (!emif || !temp || !dev_info) {
dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__);
goto error;
}
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit f9e61d365bafdee40fe2586fc6be490c3e824dad ]
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, igc_construct_skb_zc() currently allocates and reserves
additional `xdp->data_meta - xdp->data_hard_start`, which is about
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only (+ meta) to
__napi_alloc_skb() and don't reserve anything. This will give
enough headroom for stack processing.
Also, net_prefetch() xdp->data_meta and align the copy size to
speed-up memcpy() a little and better match igc_construct_skb().
Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Tested-by: Nechama Kraus <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igc/igc_main.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index c7fa978cdf02..a514cfc6c8a0 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -2434,19 +2434,20 @@ static int igc_clean_rx_irq(struct igc_q_vector *q_vector, const int budget)
static struct sk_buff *igc_construct_skb_zc(struct igc_ring *ring,
struct xdp_buff *xdp)
{
+ unsigned int totalsize = xdp->data_end - xdp->data_meta;
unsigned int metasize = xdp->data - xdp->data_meta;
- unsigned int datasize = xdp->data_end - xdp->data;
- unsigned int totalsize = metasize + datasize;
struct sk_buff *skb;
- skb = __napi_alloc_skb(&ring->q_vector->napi,
- xdp->data_end - xdp->data_hard_start,
+ net_prefetch(xdp->data_meta);
+
+ skb = __napi_alloc_skb(&ring->q_vector->napi, totalsize,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
return NULL;
- skb_reserve(skb, xdp->data_meta - xdp->data_hard_start);
- memcpy(__skb_put(skb, totalsize), xdp->data_meta, totalsize);
+ memcpy(__skb_put(skb, totalsize), xdp->data_meta,
+ ALIGN(totalsize, sizeof(long)));
+
if (metasize) {
skb_metadata_set(skb, metasize);
__skb_pull(skb, metasize);
--
2.34.1
From: Rohith Surabattula <[email protected]>
[ Upstream commit 06a466565d54a1a42168f9033a062a3f5c40e73b ]
When session gets reconnected during mount then read size in super block fs context
gets set to zero and after negotiate, rsize is not modified which results in
incorrect read with requested bytes as zero. Fixes intermittent failure
of xfstest generic/240
Note that stable requires a different version of this patch which will be
sent to the stable mailing list.
Signed-off-by: Rohith Surabattula <[email protected]>
Acked-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/cifsfs.c | 3 +++
fs/cifs/file.c | 10 ++++++++++
2 files changed, 13 insertions(+)
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 22a1d8156220..ed220daca3e1 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -210,6 +210,9 @@ cifs_read_super(struct super_block *sb)
if (rc)
goto out_no_root;
/* tune readahead according to rsize if readahead size not set on mount */
+ if (cifs_sb->ctx->rsize == 0)
+ cifs_sb->ctx->rsize =
+ tcon->ses->server->ops->negotiate_rsize(tcon, cifs_sb->ctx);
if (cifs_sb->ctx->rasize)
sb->s_bdi->ra_pages = cifs_sb->ctx->rasize / PAGE_SIZE;
else
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 82bbaf8e92b7..b23f6b489bb9 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -3734,6 +3734,11 @@ cifs_send_async_read(loff_t offset, size_t len, struct cifsFileInfo *open_file,
break;
}
+ if (cifs_sb->ctx->rsize == 0)
+ cifs_sb->ctx->rsize =
+ server->ops->negotiate_rsize(tlink_tcon(open_file->tlink),
+ cifs_sb->ctx);
+
rc = server->ops->wait_mtu_credits(server, cifs_sb->ctx->rsize,
&rsize, credits);
if (rc)
@@ -4512,6 +4517,11 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
break;
}
+ if (cifs_sb->ctx->rsize == 0)
+ cifs_sb->ctx->rsize =
+ server->ops->negotiate_rsize(tlink_tcon(open_file->tlink),
+ cifs_sb->ctx);
+
rc = server->ops->wait_mtu_credits(server, cifs_sb->ctx->rsize,
&rsize, credits);
if (rc)
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 45ea97d74313bae681328b0c36fa348036777644 ]
As the potential failure of the clk_enable(),
it should be better to check it, as same as clk_prepare_enable().
Fixes: c9afc1834e81 ("ASoC: dwc: Disallow building designware_pcm as a module")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/dwc/dwc-i2s.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c
index 33ce257ae198..315ca5c4b057 100644
--- a/sound/soc/dwc/dwc-i2s.c
+++ b/sound/soc/dwc/dwc-i2s.c
@@ -403,9 +403,13 @@ static int dw_i2s_runtime_suspend(struct device *dev)
static int dw_i2s_runtime_resume(struct device *dev)
{
struct dw_i2s_dev *dw_dev = dev_get_drvdata(dev);
+ int ret;
- if (dw_dev->capability & DW_I2S_MASTER)
- clk_enable(dw_dev->clk);
+ if (dw_dev->capability & DW_I2S_MASTER) {
+ ret = clk_enable(dw_dev->clk);
+ if (ret)
+ return ret;
+ }
return 0;
}
@@ -422,10 +426,13 @@ static int dw_i2s_resume(struct snd_soc_component *component)
{
struct dw_i2s_dev *dev = snd_soc_component_get_drvdata(component);
struct snd_soc_dai *dai;
- int stream;
+ int stream, ret;
- if (dev->capability & DW_I2S_MASTER)
- clk_enable(dev->clk);
+ if (dev->capability & DW_I2S_MASTER) {
+ ret = clk_enable(dev->clk);
+ if (ret)
+ return ret;
+ }
for_each_component_dais(component, dai) {
for_each_pcm_streams(stream)
--
2.34.1
From: Niklas Söderlund <[email protected]>
[ Upstream commit 8fa42d78f6354bb96ad3a079dcbef528ca9fa9e0 ]
When running xdpsock for a fix duration of time before terminating
using --duration=<n>, there is a race condition that may cause xdpsock
to terminate immediately.
When running for a fixed duration of time the check to determine when to
terminate execution is in is_benchmark_done() and is being executed in
the context of the poller thread,
if (opt_duration > 0) {
unsigned long dt = (get_nsecs() - start_time);
if (dt >= opt_duration)
benchmark_done = true;
}
However start_time is only set after the poller thread have been
created. This leaves a small window when the poller thread is starting
and calls is_benchmark_done() for the first time that start_time is not
yet set. In that case start_time have its initial value of 0 and the
duration check fails as it do not correlate correctly for the
applications start time and immediately sets benchmark_done which in
turn terminates the xdpsock application.
Fix this by setting start_time before creating the poller thread.
Fixes: d3f11b018f6c ("samples/bpf: xdpsock: Add duration option to specify how long to run")
Signed-off-by: Niklas Söderlund <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/xdpsock_user.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c
index 49d7a6ad7e39..1fb79b3ecdd5 100644
--- a/samples/bpf/xdpsock_user.c
+++ b/samples/bpf/xdpsock_user.c
@@ -1673,14 +1673,15 @@ int main(int argc, char **argv)
setlocale(LC_ALL, "");
+ prev_time = get_nsecs();
+ start_time = prev_time;
+
if (!opt_quiet) {
ret = pthread_create(&pt, NULL, poller, NULL);
if (ret)
exit_with_error(ret);
}
- prev_time = get_nsecs();
- start_time = prev_time;
if (opt_bench == BENCH_RXDROP)
rx_drop_all();
--
2.34.1
From: Maor Gottlieb <[email protected]>
[ Upstream commit 32a88d16615c2be295571c29273c4ac94cb75309 ]
Add missing assignment of MR type to IB_MR_TYPE_USER.
Fixes: 33006bd4f37f ("IB/core: Introduce ib_reg_user_mr")
Link: https://lore.kernel.org/r/be2e91bcd6e52dc36be289ae92f30d3a5cc6dcb1.1642491047.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/verbs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 20a46d873145..59e20936b800 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -2153,6 +2153,7 @@ struct ib_mr *ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
return mr;
mr->device = pd->device;
+ mr->type = IB_MR_TYPE_USER;
mr->pd = pd;
mr->dm = NULL;
atomic_inc(&pd->usecnt);
--
2.34.1
From: Kuldeep Singh <[email protected]>
commit 583d6b0062640def86f3265aa1042ecb6672516e upstream.
Reorder dma and dma-names property for serial node to make it compliant
with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/spear1340.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -136,9 +136,9 @@
reg = <0xb4100000 0x1000>;
interrupts = <0 105 0x4>;
status = "disabled";
- dmas = <&dwdma0 12 0 1>,
- <&dwdma0 13 1 0>;
- dma-names = "tx", "rx";
+ dmas = <&dwdma0 13 0 1>,
+ <&dwdma0 12 1 0>;
+ dma-names = "rx", "tx";
};
thermal@e07008c4 {
From: Pavel Skripkin <[email protected]>
[ Upstream commit fde18c3bac3f964d8333ae53b304d8fee430502b ]
This reverts commit 2c98b8a3458df03abdc6945bbef67ef91d181938.
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian
reported [1]. Since quick solution didn't come up let's just revert it
to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/[email protected]/ [1]
Reported-by: Maximilian Böhm <[email protected]>
Tested-by: Maximilian Böhm <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/em28xx/em28xx-cards.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index c415b1d195c4..92d867fc519c 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -4145,11 +4145,8 @@ static void em28xx_usb_disconnect(struct usb_interface *intf)
em28xx_close_extension(dev);
- if (dev->dev_next) {
- em28xx_close_extension(dev->dev_next);
+ if (dev->dev_next)
em28xx_release_resources(dev->dev_next);
- }
-
em28xx_release_resources(dev);
if (dev->dev_next) {
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 588a70177df3b1777484267584ef38ab2ca899a2 ]
In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode()
is assigned to mode and is passed to drm_mode_probed_add() directly after
that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and
there is a dereference of it in list_add_tail() without recoveries, which
could lead to NULL pointer dereference on failure of
amdgpu_dm_create_common_mode().
Fix this by adding a NULL check of mode.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: e7b07ceef2a6 ("drm/amd/display: Merge amdgpu_dm_types and amdgpu_dm")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index cd611444ad17..7983c01c007d 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7554,6 +7554,9 @@ static void amdgpu_dm_connector_add_common_modes(struct drm_encoder *encoder,
mode = amdgpu_dm_create_common_mode(encoder,
common_modes[i].name, common_modes[i].w,
common_modes[i].h);
+ if (!mode)
+ continue;
+
drm_mode_probed_add(connector, mode);
amdgpu_dm_connector->num_modes++;
}
--
2.34.1
From: Stefano Garzarella <[email protected]>
[ Upstream commit 4b5f1ad5566ada230aaa2ce861b28d1895f1ea68 ]
When we fill VQs with empty buffers and kick the host, it may send
an interrupt. `vdev->priv` must be initialized before this since it
is used in the virtqueue callbacks.
Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Suggested-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/virtio_transport.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index dad9ca65f4f9..fb1b8f99f679 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -622,6 +622,8 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
INIT_WORK(&vsock->event_work, virtio_transport_event_work);
INIT_WORK(&vsock->send_pkt_work, virtio_transport_send_pkt_work);
+ vdev->priv = vsock;
+
mutex_lock(&vsock->tx_lock);
vsock->tx_run = true;
mutex_unlock(&vsock->tx_lock);
@@ -639,7 +641,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
if (virtio_has_feature(vdev, VIRTIO_VSOCK_F_SEQPACKET))
vsock->seqpacket_allow = true;
- vdev->priv = vsock;
rcu_assign_pointer(the_virtio_vsock, vsock);
mutex_unlock(&the_virtio_vsock_mutex);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit b146e343a9e05605b491b1bf4a2b62a39d5638d8 ]
The pm_runtime_enable will increase power disable depth.
Thus a pairing decrement is needed on the error handling
path to keep it balanced according to context.
Fixes: 44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/nwl-dsi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index af07eeb47ca0..6e484d836cfe 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -1204,6 +1204,7 @@ static int nwl_dsi_probe(struct platform_device *pdev)
ret = nwl_dsi_select_input(dsi);
if (ret < 0) {
+ pm_runtime_disable(dev);
mipi_dsi_host_unregister(&dsi->dsi_host);
return ret;
}
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit abd77889851d2ead0d0c9c4d29f1808801477b00 ]
In cal_ctx_v4l2_init_formats(), devm_kzalloc() is assigned to
ctx->active_fmt and there is a dereference of it after that, which could
lead to NULL pointer dereference on failure of devm_kzalloc().
Fix this bug by adding a NULL check of ctx->active_fmt.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings, and our static
analyzer no longer warns about this code.
Fixes: 7168155002cf ("media: ti-vpe: cal: Move format handling to cal.c and expose helpers")
Signed-off-by: Zhou Qingyang <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/ti-vpe/cal-video.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/platform/ti-vpe/cal-video.c b/drivers/media/platform/ti-vpe/cal-video.c
index 7799da1cc261..3e936a2ca36c 100644
--- a/drivers/media/platform/ti-vpe/cal-video.c
+++ b/drivers/media/platform/ti-vpe/cal-video.c
@@ -823,6 +823,9 @@ static int cal_ctx_v4l2_init_formats(struct cal_ctx *ctx)
/* Enumerate sub device formats and enable all matching local formats */
ctx->active_fmt = devm_kcalloc(ctx->cal->dev, cal_num_formats,
sizeof(*ctx->active_fmt), GFP_KERNEL);
+ if (!ctx->active_fmt)
+ return -ENOMEM;
+
ctx->num_active_fmt = 0;
for (j = 0, i = 0; ; ++j) {
--
2.34.1
From: Zheyu Ma <[email protected]>
[ Upstream commit bb77bd31c281f70ec77c9c4f584950a779e05cf8 ]
When the driver fails to register net device, it should free the DMA
region first, and then do other cleanup.
Signed-off-by: Zheyu Ma <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sun/sunhme.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index 62f81b0d14ed..b05ee2e0e305 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -3139,7 +3139,7 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
if (err) {
printk(KERN_ERR "happymeal(PCI): Cannot register net device, "
"aborting.\n");
- goto err_out_iounmap;
+ goto err_out_free_coherent;
}
pci_set_drvdata(pdev, hp);
@@ -3172,6 +3172,10 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
return 0;
+err_out_free_coherent:
+ dma_free_coherent(hp->dma_dev, PAGE_SIZE,
+ hp->happy_block, hp->hblock_dvma);
+
err_out_iounmap:
iounmap(hp->gregs);
--
2.34.1
From: Florian Westphal <[email protected]>
[ Upstream commit 408bdcfce8dfd6902f75fbcd3b99d8b24b506597 ]
Its the same as nf_conntrack_put(), but without the
need for an indirect call. The downside is a module dependency on
nf_conntrack, but all of these already depend on conntrack anyway.
Cc: Paul Blakey <[email protected]>
Cc: [email protected]
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conntrack_core.c | 4 ++--
net/openvswitch/conntrack.c | 14 ++++++++++----
net/sched/act_ct.c | 6 +++---
3 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 7f7997460764..917e708a4561 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -989,7 +989,7 @@ static int __nf_ct_resolve_clash(struct sk_buff *skb,
nf_ct_acct_merge(ct, ctinfo, loser_ct);
nf_ct_add_to_dying_list(loser_ct);
- nf_conntrack_put(&loser_ct->ct_general);
+ nf_ct_put(loser_ct);
nf_ct_set(skb, ct, ctinfo);
NF_CT_STAT_INC(net, clash_resolve);
@@ -1920,7 +1920,7 @@ nf_conntrack_in(struct sk_buff *skb, const struct nf_hook_state *state)
/* Invalid: inverse of the return code tells
* the netfilter core what to do */
pr_debug("nf_conntrack_in: Can't track with proto module\n");
- nf_conntrack_put(&ct->ct_general);
+ nf_ct_put(ct);
skb->_nfct = 0;
/* Special case: TCP tracker reports an attempt to reopen a
* closed/aborted connection. We have to go back and create a
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index 8f47f4e78d32..f2b64cab9af7 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -574,7 +574,7 @@ ovs_ct_expect_find(struct net *net, const struct nf_conntrack_zone *zone,
struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
nf_ct_delete(ct, 0, 0);
- nf_conntrack_put(&ct->ct_general);
+ nf_ct_put(ct);
}
}
@@ -723,7 +723,7 @@ static bool skb_nfct_cached(struct net *net,
if (nf_ct_is_confirmed(ct))
nf_ct_delete(ct, 0, 0);
- nf_conntrack_put(&ct->ct_general);
+ nf_ct_put(ct);
nf_ct_set(skb, NULL, 0);
return false;
}
@@ -967,7 +967,8 @@ static int __ovs_ct_lookup(struct net *net, struct sw_flow_key *key,
/* Associate skb with specified zone. */
if (tmpl) {
- nf_conntrack_put(skb_nfct(skb));
+ ct = nf_ct_get(skb, &ctinfo);
+ nf_ct_put(ct);
nf_conntrack_get(&tmpl->ct_general);
nf_ct_set(skb, tmpl, IP_CT_NEW);
}
@@ -1328,7 +1329,12 @@ int ovs_ct_execute(struct net *net, struct sk_buff *skb,
int ovs_ct_clear(struct sk_buff *skb, struct sw_flow_key *key)
{
- nf_conntrack_put(skb_nfct(skb));
+ enum ip_conntrack_info ctinfo;
+ struct nf_conn *ct;
+
+ ct = nf_ct_get(skb, &ctinfo);
+
+ nf_ct_put(ct);
nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
ovs_ct_fill_key(skb, key, false);
diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index 4ffea1290ce1..240b3c5d2eb1 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -592,7 +592,7 @@ static bool tcf_ct_skb_nfct_cached(struct net *net, struct sk_buff *skb,
if (nf_ct_is_confirmed(ct))
nf_ct_kill(ct);
- nf_conntrack_put(&ct->ct_general);
+ nf_ct_put(ct);
nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
return false;
@@ -757,7 +757,7 @@ static void tcf_ct_params_free(struct rcu_head *head)
tcf_ct_flow_table_put(params);
if (params->tmpl)
- nf_conntrack_put(¶ms->tmpl->ct_general);
+ nf_ct_put(params->tmpl);
kfree(params);
}
@@ -967,7 +967,7 @@ static int tcf_ct_act(struct sk_buff *skb, const struct tc_action *a,
tc_skb_cb(skb)->post_ct = false;
ct = nf_ct_get(skb, &ctinfo);
if (ct) {
- nf_conntrack_put(&ct->ct_general);
+ nf_ct_put(ct);
nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
}
--
2.34.1
From: Evgeny Novikov <[email protected]>
[ Upstream commit 8738ddcac644964ae128ccd3d80d48773c8d528e ]
w100fb_probe() did not reset the global state to its initial state. This
can result in invocation of iounmap() even when there was not the
appropriate successful call of ioremap(). For instance, this may be the
case if first probe fails after two successful ioremap() while second
probe fails when first ioremap() fails. The similar issue is with
w100fb_remove(). The patch fixes both bugs.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <[email protected]>
Co-developed-by: Kirill Shilimanov <[email protected]>
Signed-off-by: Kirill Shilimanov <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/w100fb.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/w100fb.c b/drivers/video/fbdev/w100fb.c
index d96ab28f8ce4..4e641a780726 100644
--- a/drivers/video/fbdev/w100fb.c
+++ b/drivers/video/fbdev/w100fb.c
@@ -770,12 +770,18 @@ static int w100fb_probe(struct platform_device *pdev)
fb_dealloc_cmap(&info->cmap);
kfree(info->pseudo_palette);
}
- if (remapped_fbuf != NULL)
+ if (remapped_fbuf != NULL) {
iounmap(remapped_fbuf);
- if (remapped_regs != NULL)
+ remapped_fbuf = NULL;
+ }
+ if (remapped_regs != NULL) {
iounmap(remapped_regs);
- if (remapped_base != NULL)
+ remapped_regs = NULL;
+ }
+ if (remapped_base != NULL) {
iounmap(remapped_base);
+ remapped_base = NULL;
+ }
if (info)
framebuffer_release(info);
return err;
@@ -795,8 +801,11 @@ static int w100fb_remove(struct platform_device *pdev)
fb_dealloc_cmap(&info->cmap);
iounmap(remapped_base);
+ remapped_base = NULL;
iounmap(remapped_regs);
+ remapped_regs = NULL;
iounmap(remapped_fbuf);
+ remapped_fbuf = NULL;
framebuffer_release(info);
--
2.34.1
From: Trond Myklebust <[email protected]>
[ Upstream commit 7c9d845f0612e5bcd23456a2ec43be8ac43458f1 ]
In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.
Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.
Reported-by: Xiaomeng Tong <[email protected]>
Fixes: 1be5683b03a7 ("pnfs: CB_NOTIFY_DEVICEID")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/callback_proc.c | 27 +++++++++------------------
fs/nfs/pnfs.c | 11 +++++++++++
fs/nfs/pnfs.h | 2 ++
3 files changed, 22 insertions(+), 18 deletions(-)
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index f2bc5b5b764b..a30dd35ec1c2 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -358,12 +358,11 @@ __be32 nfs4_callback_devicenotify(void *argp, void *resp,
struct cb_process_state *cps)
{
struct cb_devicenotifyargs *args = argp;
+ const struct pnfs_layoutdriver_type *ld = NULL;
uint32_t i;
__be32 res = 0;
- struct nfs_client *clp = cps->clp;
- struct nfs_server *server = NULL;
- if (!clp) {
+ if (!cps->clp) {
res = cpu_to_be32(NFS4ERR_OP_NOT_IN_SESSION);
goto out;
}
@@ -371,23 +370,15 @@ __be32 nfs4_callback_devicenotify(void *argp, void *resp,
for (i = 0; i < args->ndevs; i++) {
struct cb_devicenotifyitem *dev = &args->devs[i];
- if (!server ||
- server->pnfs_curr_ld->id != dev->cbd_layout_type) {
- rcu_read_lock();
- list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link)
- if (server->pnfs_curr_ld &&
- server->pnfs_curr_ld->id == dev->cbd_layout_type) {
- rcu_read_unlock();
- goto found;
- }
- rcu_read_unlock();
- continue;
+ if (!ld || ld->id != dev->cbd_layout_type) {
+ pnfs_put_layoutdriver(ld);
+ ld = pnfs_find_layoutdriver(dev->cbd_layout_type);
+ if (!ld)
+ continue;
}
-
- found:
- nfs4_delete_deviceid(server->pnfs_curr_ld, clp, &dev->cbd_dev_id);
+ nfs4_delete_deviceid(ld, cps->clp, &dev->cbd_dev_id);
}
-
+ pnfs_put_layoutdriver(ld);
out:
kfree(args->devs);
return res;
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 7c9090a28e5c..7ddd003ab8b1 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -92,6 +92,17 @@ find_pnfs_driver(u32 id)
return local;
}
+const struct pnfs_layoutdriver_type *pnfs_find_layoutdriver(u32 id)
+{
+ return find_pnfs_driver(id);
+}
+
+void pnfs_put_layoutdriver(const struct pnfs_layoutdriver_type *ld)
+{
+ if (ld)
+ module_put(ld->owner);
+}
+
void
unset_pnfs_layoutdriver(struct nfs_server *nfss)
{
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index a0f6ff094b3a..5a54cf8ac6f3 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -238,6 +238,8 @@ struct pnfs_devicelist {
extern int pnfs_register_layoutdriver(struct pnfs_layoutdriver_type *);
extern void pnfs_unregister_layoutdriver(struct pnfs_layoutdriver_type *);
+extern const struct pnfs_layoutdriver_type *pnfs_find_layoutdriver(u32 id);
+extern void pnfs_put_layoutdriver(const struct pnfs_layoutdriver_type *ld);
/* nfs4proc.c */
extern size_t max_response_pages(struct nfs_server *server);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit dab4df9ca919f59e5b9dd84385eaf34d4f20dbb0 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index 5f7c421ab6e7..334cb85855a9 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -1038,6 +1038,7 @@ int mtk_pctrl_init(struct platform_device *pdev,
node = of_parse_phandle(np, "mediatek,pctl-regmap", 0);
if (node) {
pctl->regmap1 = syscon_node_to_regmap(node);
+ of_node_put(node);
if (IS_ERR(pctl->regmap1))
return PTR_ERR(pctl->regmap1);
} else if (regmap) {
@@ -1051,6 +1052,7 @@ int mtk_pctrl_init(struct platform_device *pdev,
node = of_parse_phandle(np, "mediatek,pctl-regmap", 1);
if (node) {
pctl->regmap2 = syscon_node_to_regmap(node);
+ of_node_put(node);
if (IS_ERR(pctl->regmap2))
return PTR_ERR(pctl->regmap2);
}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 8f90161a66bc3d6b9fe8dde4d9028d20eae1b62a ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/qcom_wcnss.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index ebadc6c08e11..b17742eac9ff 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -501,6 +501,7 @@ static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
}
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret)
return ret;
--
2.34.1
From: Joe Carnuccio <[email protected]>
commit 0d6a536cb1fcabb6c3e9c94871c8d0b29bb5813b upstream.
This is an update to the original 28xx adapter enablement. Add a bunch of
conditionals that are applicable for 28xx.
Link: https://lore.kernel.org/r/[email protected]
Fixes: ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX")
Cc: [email protected]
Signed-off-by: Joe Carnuccio <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_attr.c | 7 ++-----
drivers/scsi/qla2xxx/qla_init.c | 8 +++-----
drivers/scsi/qla2xxx/qla_mbx.c | 14 +++++++++++---
drivers/scsi/qla2xxx/qla_os.c | 3 +--
drivers/scsi/qla2xxx/qla_sup.c | 4 ++--
drivers/scsi/qla2xxx/qla_target.c | 3 +--
6 files changed, 20 insertions(+), 19 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -555,7 +555,7 @@ qla2x00_sysfs_read_vpd(struct file *filp
if (!capable(CAP_SYS_ADMIN))
return -EINVAL;
- if (IS_NOCACHE_VPD_TYPE(ha))
+ if (!IS_NOCACHE_VPD_TYPE(ha))
goto skip;
faddr = ha->flt_region_vpd << 2;
@@ -745,7 +745,7 @@ qla2x00_sysfs_write_reset(struct file *f
ql_log(ql_log_info, vha, 0x706f,
"Issuing MPI reset.\n");
- if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+ if (IS_QLA83XX(ha)) {
uint32_t idc_control;
qla83xx_idc_lock(vha, 0);
@@ -1056,9 +1056,6 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t
continue;
if (iter->type == 3 && !(IS_CNA_CAPABLE(ha)))
continue;
- if (iter->type == 0x27 &&
- (!IS_QLA27XX(ha) || !IS_QLA28XX(ha)))
- continue;
sysfs_remove_bin_file(&host->shost_gendev.kobj,
iter->attr);
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3473,7 +3473,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
mem_size = (ha->fw_memory_size - 0x11000 + 1) *
sizeof(uint16_t);
} else if (IS_FWI2_CAPABLE(ha)) {
- if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
+ if (IS_QLA83XX(ha))
fixed_size = offsetof(struct qla83xx_fw_dump, ext_mem);
else if (IS_QLA81XX(ha))
fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
@@ -3485,8 +3485,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
mem_size = (ha->fw_memory_size - 0x100000 + 1) *
sizeof(uint32_t);
if (ha->mqenable) {
- if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha) &&
- !IS_QLA28XX(ha))
+ if (!IS_QLA83XX(ha))
mq_size = sizeof(struct qla2xxx_mq_chain);
/*
* Allocate maximum buffer size for all queues - Q0.
@@ -4047,8 +4046,7 @@ enable_82xx_npiv:
ha->fw_major_version, ha->fw_minor_version,
ha->fw_subminor_version);
- if (IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
- IS_QLA28XX(ha)) {
+ if (IS_QLA83XX(ha)) {
ha->flags.fac_supported = 0;
rval = QLA_SUCCESS;
}
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -9,6 +9,12 @@
#include <linux/delay.h>
#include <linux/gfp.h>
+#ifdef CONFIG_PPC
+#define IS_PPCARCH true
+#else
+#define IS_PPCARCH false
+#endif
+
static struct mb_cmd_name {
uint16_t cmd;
const char *str;
@@ -728,6 +734,9 @@ again:
vha->min_supported_speed =
nv->min_supported_speed;
}
+
+ if (IS_PPCARCH)
+ mcp->mb[11] |= BIT_4;
}
if (ha->flags.exlogins_enabled)
@@ -3029,8 +3038,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_
ha->orig_fw_iocb_count = mcp->mb[10];
if (ha->flags.npiv_supported)
ha->max_npiv_vports = mcp->mb[11];
- if (IS_QLA81XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
- IS_QLA28XX(ha))
+ if (IS_QLA81XX(ha) || IS_QLA83XX(ha))
ha->fw_max_fcf_count = mcp->mb[12];
}
@@ -5621,7 +5629,7 @@ qla2x00_get_data_rate(scsi_qla_host_t *v
mcp->out_mb = MBX_1|MBX_0;
mcp->in_mb = MBX_2|MBX_1|MBX_0;
if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
- mcp->in_mb |= MBX_3;
+ mcp->in_mb |= MBX_4|MBX_3;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3739,8 +3739,7 @@ qla2x00_unmap_iobases(struct qla_hw_data
if (ha->mqiobase)
iounmap(ha->mqiobase);
- if ((IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
- ha->msixbase)
+ if (ha->msixbase)
iounmap(ha->msixbase);
}
}
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -844,7 +844,7 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vh
ha->flt_region_nvram = start;
break;
case FLT_REG_IMG_PRI_27XX:
- if (IS_QLA27XX(ha) && !IS_QLA28XX(ha))
+ if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
ha->flt_region_img_status_pri = start;
break;
case FLT_REG_IMG_SEC_27XX:
@@ -1356,7 +1356,7 @@ next:
flash_data_addr(ha, faddr), le32_to_cpu(*dwptr));
if (ret) {
ql_dbg(ql_dbg_user, vha, 0x7006,
- "Failed slopw write %x (%x)\n", faddr, *dwptr);
+ "Failed slow write %x (%x)\n", faddr, *dwptr);
break;
}
}
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -7220,8 +7220,7 @@ qlt_probe_one_stage1(struct scsi_qla_hos
if (!QLA_TGT_MODE_ENABLED())
return;
- if ((ql2xenablemsix == 0) || IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
- IS_QLA28XX(ha)) {
+ if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
ISP_ATIO_Q_IN(base_vha) = &ha->mqiobase->isp25mq.atio_q_in;
ISP_ATIO_Q_OUT(base_vha) = &ha->mqiobase->isp25mq.atio_q_out;
} else {
From: Arınç ÜNAL <[email protected]>
[ Upstream commit 7eeec44d33f6be7caca4fe9ca4e653cf315a36c1 ]
Fix formatting on mt7621.dtsi.
Reviewed-by: Sergio Paracuellos <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/mt7621-dts/mt7621.dtsi | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index eeabe9c0f4fb..eca384cdec39 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -36,9 +36,9 @@
regulator-max-microvolt = <3300000>;
enable-active-high;
regulator-always-on;
- };
+ };
- mmc_fixed_1v8_io: fixedregulator@1 {
+ mmc_fixed_1v8_io: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "mmc_io";
regulator-min-microvolt = <1800000>;
@@ -391,17 +391,18 @@
mediatek,ethsys = <&sysc>;
-
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "rgmii";
+
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
+
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
@@ -409,6 +410,7 @@
phy-mode = "rgmii-rxid";
phy-handle = <&phy_external>;
};
+
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
@@ -439,36 +441,43 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+
port@0 {
status = "off";
reg = <0>;
label = "lan0";
};
+
port@1 {
status = "off";
reg = <1>;
label = "lan1";
};
+
port@2 {
status = "off";
reg = <2>;
label = "lan2";
};
+
port@3 {
status = "off";
reg = <3>;
label = "lan3";
};
+
port@4 {
status = "off";
reg = <4>;
label = "lan4";
};
+
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
+
fixed-link {
speed = <1000>;
full-duplex;
--
2.34.1
From: Wang Yufen <[email protected]>
[ Upstream commit 938d3480b92fa5e454b7734294f12a7b75126f09 ]
If tcp_bpf_sendmsg is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.
sk1 (redirect sk2) sk2
------------------- ---------------
tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
tcp_bpf_sendmsg_redir()
bpf_tcp_ingress()
sock_map_close()
lock_sock()
lock_sock() ... blocking
sk_psock_stop
sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
release_sock(sk);
lock_sock()
sk_mem_charge()
get_page()
sk_psock_queue_msg()
sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED);
drop_sk_msg()
release_sock()
While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge
and has sg pages need to put. To fix we use sk_msg_free() and then kfee()
msg.
This issue can cause the following info:
WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0
Call Trace:
<IRQ>
inet_csk_destroy_sock+0x55/0x110
tcp_rcv_state_process+0xe5f/0xe90
? sk_filter_trim_cap+0x10d/0x230
? tcp_v4_do_rcv+0x161/0x250
tcp_v4_do_rcv+0x161/0x250
tcp_v4_rcv+0xc3a/0xce0
ip_protocol_deliver_rcu+0x3d/0x230
ip_local_deliver_finish+0x54/0x60
ip_local_deliver+0xfd/0x110
? ip_protocol_deliver_rcu+0x230/0x230
ip_rcv+0xd6/0x100
? ip_local_deliver+0x110/0x110
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0xa4/0x160
__napi_poll+0x29/0x1b0
net_rx_action+0x287/0x300
__do_softirq+0xff/0x2fc
do_softirq+0x79/0x90
</IRQ>
WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
? process_one_work+0x3c0/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Fixes: 9635720b7c88 ("bpf, sockmap: Fix memleak on ingress msg enqueue")
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/skmsg.h | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h
index b4256847c707..73bedd128d52 100644
--- a/include/linux/skmsg.h
+++ b/include/linux/skmsg.h
@@ -310,21 +310,16 @@ static inline void sock_drop(struct sock *sk, struct sk_buff *skb)
kfree_skb(skb);
}
-static inline void drop_sk_msg(struct sk_psock *psock, struct sk_msg *msg)
-{
- if (msg->skb)
- sock_drop(psock->sk, msg->skb);
- kfree(msg);
-}
-
static inline void sk_psock_queue_msg(struct sk_psock *psock,
struct sk_msg *msg)
{
spin_lock_bh(&psock->ingress_lock);
if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))
list_add_tail(&msg->list, &psock->ingress_msg);
- else
- drop_sk_msg(psock, msg);
+ else {
+ sk_msg_free(psock->sk, msg);
+ kfree(msg);
+ }
spin_unlock_bh(&psock->ingress_lock);
}
--
2.34.1
From: Oliver Hartkopp <[email protected]>
[ Upstream commit e382fea8ae54f5bb62869c6b69b33993d43adeca ]
In commit 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when
reading from socket") a new check for recvmsg flags has been
introduced that only checked for the flags that are handled in
isotp_recvmsg() itself.
This accidentally removed the MSG_PEEK feature flag which is processed
later in the call chain in __skb_try_recv_from_queue().
Add MSG_PEEK to the set of valid flags to restore the feature.
Fixes: 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when reading from socket")
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1079554254
Link: https://lore.kernel.org/all/[email protected]
Reported-by: Derek Will <[email protected]>
Suggested-by: Derek Will <[email protected]>
Tested-by: Derek Will <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/can/isotp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/can/isotp.c b/net/can/isotp.c
index ad61342d2e16..a95d171b3a64 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1009,7 +1009,7 @@ static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
int noblock = flags & MSG_DONTWAIT;
int ret = 0;
- if (flags & ~(MSG_DONTWAIT | MSG_TRUNC))
+ if (flags & ~(MSG_DONTWAIT | MSG_TRUNC | MSG_PEEK))
return -EINVAL;
if (!so->bound)
--
2.34.1
From: Miaoqian Lin <[email protected]>
commit d055ef3a2c6919cff504ae3b710c96318d545fd2 upstream.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/rti_wdt.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -229,6 +229,7 @@ static int rti_wdt_probe(struct platform
ret = pm_runtime_get_sync(dev);
if (ret) {
pm_runtime_put_noidle(dev);
+ pm_runtime_disable(&pdev->dev);
return dev_err_probe(dev, ret, "runtime pm failed\n");
}
From: Wang Hai <[email protected]>
commit bbbf962d9460194993ee1943a793a0a0af4a7fbf upstream.
I got a memory leak report:
unreferenced object 0xffff8881191fc040 (size 232):
comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0
[<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340
[<ffffffff832974fb>] __alloc_skb+0x1db/0x200
[<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0
[<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110
[<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30
[<ffffffff8119c558>] process_one_work+0x2e8/0x770
[<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0
[<ffffffff811a88e0>] kthread+0x120/0x160
[<ffffffff8100242f>] ret_from_fork+0x1f/0x30
In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_
buffer_to_peer(), the semantics of send6() is required to free skb. But
when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it
to fix this bug.
Signed-off-by: Wang Hai <[email protected]>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireguard/socket.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wireguard/socket.c
+++ b/drivers/net/wireguard/socket.c
@@ -160,6 +160,7 @@ out:
rcu_read_unlock_bh();
return ret;
#else
+ kfree_skb(skb);
return -EAFNOSUPPORT;
#endif
}
From: Codrin Ciubotariu <[email protected]>
[ Upstream commit 1a944729d8635fa59638f24e8727d5ccaa0c8c19 ]
Audio PLL can be used as parent by the GCLKs of PDMCs.
Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
Signed-off-by: Codrin Ciubotariu <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/at91/sama7g5.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 019e712f90d6..9eed97a299d0 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -687,16 +687,16 @@ static const struct {
{ .n = "pdmc0_gclk",
.id = 68,
.r = { .max = 50000000 },
- .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
- .pp_mux_table = { 5, 8, },
+ .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
+ .pp_mux_table = { 5, 9, },
.pp_count = 2,
.pp_chg_id = INT_MIN, },
{ .n = "pdmc1_gclk",
.id = 69,
.r = { .max = 50000000, },
- .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
- .pp_mux_table = { 5, 8, },
+ .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
+ .pp_mux_table = { 5, 9, },
.pp_count = 2,
.pp_chg_id = INT_MIN, },
--
2.34.1
From: Pankaj Raghav <[email protected]>
commit 726be2c72efc0a64c206e854b8996ad3ab9c7507 upstream.
commit 2f4c9ba23b88 ("nvme: export zoned namespaces without Zone Append
support read-only") marks zoned namespaces without append support
read-only. It does iso by setting NVME_NS_FORCE_RO in ns->flags in
nvme_update_zone_info and checking for that flag later in
nvme_update_disk_info to mark the disk as read-only.
But commit 73d90386b559 ("nvme: cleanup zone information initialization")
rearranged nvme_update_disk_info to be called before
nvme_update_zone_info and thus not marking the disk as read-only.
The call order cannot be just reverted because nvme_update_zone_info sets
certain queue parameters such as zone_write_granularity that depend on the
prior call to nvme_update_disk_info.
Remove the call to set_disk_ro in nvme_update_disk_info. and call
set_disk_ro after nvme_update_zone_info and nvme_update_disk_info to set
the permission for ZNS drives correctly. The same applies to the
multipath disk path.
Fixes: 73d90386b559 ("nvme: cleanup zone information initialization")
Signed-off-by: Pankaj Raghav <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1838,9 +1838,6 @@ static void nvme_update_disk_info(struct
nvme_config_discard(disk, ns);
blk_queue_max_write_zeroes_sectors(disk->queue,
ns->ctrl->max_zeroes_sectors);
-
- set_disk_ro(disk, (id->nsattr & NVME_NS_ATTR_RO) ||
- test_bit(NVME_NS_FORCE_RO, &ns->flags));
}
static inline bool nvme_first_scan(struct gendisk *disk)
@@ -1901,6 +1898,8 @@ static int nvme_update_ns_info(struct nv
goto out_unfreeze;
}
+ set_disk_ro(ns->disk, (id->nsattr & NVME_NS_ATTR_RO) ||
+ test_bit(NVME_NS_FORCE_RO, &ns->flags));
set_bit(NVME_NS_READY, &ns->flags);
blk_mq_unfreeze_queue(ns->disk->queue);
@@ -1913,6 +1912,9 @@ static int nvme_update_ns_info(struct nv
if (nvme_ns_head_multipath(ns->head)) {
blk_mq_freeze_queue(ns->head->disk->queue);
nvme_update_disk_info(ns->head->disk, ns, id);
+ set_disk_ro(ns->head->disk,
+ (id->nsattr & NVME_NS_ATTR_RO) ||
+ test_bit(NVME_NS_FORCE_RO, &ns->flags));
nvme_mpath_revalidate_paths(ns);
blk_stack_limits(&ns->head->disk->queue->limits,
&ns->queue->limits, 0);
From: Marc Zyngier <[email protected]>
[ Upstream commit a6aca2f460e203781dc41391913cc5b54f4bc0ce ]
pdc_enable_intr() serves as a primitive to qcom_pdc_gic_{en,dis}able,
and has a raw spinlock for mutual exclusion, which is uses with
interruptible primitives.
This means that this critical section can itself be interrupted.
Should the interrupt also be a PDC interrupt, and the endpoint driver
perform an irq_disable() on that interrupt, we end-up in a deadlock.
Fix this by using the irqsave/irqrestore variants of the locking
primitives.
Signed-off-by: Marc Zyngier <[email protected]>
Reviewed-by: Maulik Shah <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/qcom-pdc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index 173e6520e06e..c0b457f26ec4 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -56,17 +56,18 @@ static u32 pdc_reg_read(int reg, u32 i)
static void pdc_enable_intr(struct irq_data *d, bool on)
{
int pin_out = d->hwirq;
+ unsigned long flags;
u32 index, mask;
u32 enable;
index = pin_out / 32;
mask = pin_out % 32;
- raw_spin_lock(&pdc_lock);
+ raw_spin_lock_irqsave(&pdc_lock, flags);
enable = pdc_reg_read(IRQ_ENABLE_BANK, index);
enable = on ? ENABLE_INTR(enable, mask) : CLEAR_INTR(enable, mask);
pdc_reg_write(IRQ_ENABLE_BANK, index, enable);
- raw_spin_unlock(&pdc_lock);
+ raw_spin_unlock_irqrestore(&pdc_lock, flags);
}
static void qcom_pdc_gic_disable(struct irq_data *d)
--
2.34.1
From: Wang Yufen <[email protected]>
[ Upstream commit 84472b436e760ba439e1969a9e3c5ae7c86de39d ]
In tcp_bpf_send_verdict(), if msg has more data after
tcp_bpf_sendmsg_redir():
tcp_bpf_send_verdict()
tosend = msg->sg.size //msg->sg.size = 22220
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc
tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
goto more_data;
tosend = msg->sg.size //msg->sg.size = 11000
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc
The msg->sg.size(11000) has been uncharged twice, to fix we can charge the
remaining msg->sg.size before goto more data.
This issue can cause the following info:
WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
__tcp_close+0x279/0x470
tcp_close+0x1f/0x60
inet_release+0x3f/0x80
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x92/0x250
task_work_run+0x6a/0xa0
do_exit+0x33b/0xb60
do_group_exit+0x2f/0xa0
get_signal+0xb6/0x950
arch_do_signal_or_restart+0xac/0x2a0
? vfs_write+0x237/0x290
exit_to_user_mode_prepare+0xa9/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_bpf.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 9b9b02052fd3..304800c60427 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -335,7 +335,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
cork = true;
psock->cork = NULL;
}
- sk_msg_return(sk, msg, tosend);
+ sk_msg_return(sk, msg, msg->sg.size);
release_sock(sk);
ret = tcp_bpf_sendmsg_redir(sk_redir, msg, tosend, flags);
@@ -375,8 +375,11 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
}
if (msg &&
msg->sg.data[msg->sg.start].page_link &&
- msg->sg.data[msg->sg.start].length)
+ msg->sg.data[msg->sg.start].length) {
+ if (eval == __SK_REDIRECT)
+ sk_mem_charge(sk, msg->sg.size);
goto more_data;
+ }
}
return ret;
}
--
2.34.1
From: Quinn Tran <[email protected]>
commit 725d3a0d31a51c0debf970011e05f585e805165b upstream.
Fix stuck sessions in get port database. When a thread is in the process of
re-establishing a session, a flag is set to prevent multiple threads /
triggers from doing the same task. This flag was left on, where any attempt
to relogin was locked out. Clear this flag, if the attempt has failed.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1333,9 +1333,9 @@ int qla24xx_async_gpdb(struct scsi_qla_h
if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT) ||
fcport->loop_id == FC_NO_LOOP_ID) {
ql_log(ql_log_warn, vha, 0xffff,
- "%s: %8phC - not sending command.\n",
- __func__, fcport->port_name);
- return rval;
+ "%s: %8phC online %d flags %x - not sending command.\n",
+ __func__, fcport->port_name, vha->flags.online, fcport->flags);
+ goto done;
}
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
From: Mark Tomlinson <[email protected]>
[ Upstream commit 92c45b63ce22c8898aa41806e8d6692bcd577510 ]
For hardware that only supports 32-bit writes to PCI there is the
possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited
messages was introduced by fb2659230120, but rate-limiting is not the best
choice here. Some devices may not show the warnings they should if another
device has just produced a bunch of warnings. Also, the number of messages
can be a nuisance on devices which are otherwise working fine.
Change the ratelimit to a single warning per bus. This ensures no bus is
'starved' of emitting a warning and also that there isn't a continuous
stream of warnings. It would be preferable to have a warning per device,
but the pci_dev structure is not available here, and a lookup from devfn
would be far too slow.
Suggested-by: Bjorn Helgaas <[email protected]>
Fixes: fb2659230120 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Tomlinson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Scott Branden <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/access.c | 9 ++++++---
include/linux/pci.h | 1 +
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 46935695cfb9..8d0d1f61c650 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -160,9 +160,12 @@ int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn,
* write happen to have any RW1C (write-one-to-clear) bits set, we
* just inadvertently cleared something we shouldn't have.
*/
- dev_warn_ratelimited(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
- size, pci_domain_nr(bus), bus->number,
- PCI_SLOT(devfn), PCI_FUNC(devfn), where);
+ if (!bus->unsafe_warn) {
+ dev_warn(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
+ size, pci_domain_nr(bus), bus->number,
+ PCI_SLOT(devfn), PCI_FUNC(devfn), where);
+ bus->unsafe_warn = 1;
+ }
mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
tmp = readl(addr) & mask;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 152a4d74f87f..9d6e75222868 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -656,6 +656,7 @@ struct pci_bus {
struct bin_attribute *legacy_io; /* Legacy I/O for this bus */
struct bin_attribute *legacy_mem; /* Legacy mem */
unsigned int is_added:1;
+ unsigned int unsafe_warn:1; /* warned about RW1C config write */
};
#define to_pci_bus(n) container_of(n, struct pci_bus, dev)
--
2.34.1
From: Robert Hancock <[email protected]>
[ Upstream commit 7a7d340ba4d9351e4c8847b898a2b996727a922a ]
If a memory allocation error occurred during an attempt to refill a slot
in the RX ring after the packet was received, the hardware tail pointer
would still have been updated to point to or past the slot which remained
marked as previously completed. This would likely result in the DMA engine
raising an error when it eventually tried to use that slot again.
If a slot cannot be refilled, then just stop processing and do not move
the tail pointer past it. On the next attempt, we should skip receiving
the packet from the empty slot and just try to refill it again.
This failure mode has not actually been observed, but was found as part
of other driver updates.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/xilinx/xilinx_axienet_main.c | 72 +++++++++++--------
1 file changed, 42 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 2169417210c2..80637ffcca93 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -857,46 +857,53 @@ static void axienet_recv(struct net_device *ndev)
while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
dma_addr_t phys;
- tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
-
/* Ensure we see complete descriptor update */
dma_rmb();
- phys = desc_get_phys_addr(lp, cur_p);
- dma_unmap_single(ndev->dev.parent, phys, lp->max_frm_size,
- DMA_FROM_DEVICE);
skb = cur_p->skb;
cur_p->skb = NULL;
- length = cur_p->app4 & 0x0000FFFF;
-
- skb_put(skb, length);
- skb->protocol = eth_type_trans(skb, ndev);
- /*skb_checksum_none_assert(skb);*/
- skb->ip_summed = CHECKSUM_NONE;
-
- /* if we're doing Rx csum offload, set it up */
- if (lp->features & XAE_FEATURE_FULL_RX_CSUM) {
- csumstatus = (cur_p->app2 &
- XAE_FULL_CSUM_STATUS_MASK) >> 3;
- if ((csumstatus == XAE_IP_TCP_CSUM_VALIDATED) ||
- (csumstatus == XAE_IP_UDP_CSUM_VALIDATED)) {
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ /* skb could be NULL if a previous pass already received the
+ * packet for this slot in the ring, but failed to refill it
+ * with a newly allocated buffer. In this case, don't try to
+ * receive it again.
+ */
+ if (likely(skb)) {
+ length = cur_p->app4 & 0x0000FFFF;
+
+ phys = desc_get_phys_addr(lp, cur_p);
+ dma_unmap_single(ndev->dev.parent, phys, lp->max_frm_size,
+ DMA_FROM_DEVICE);
+
+ skb_put(skb, length);
+ skb->protocol = eth_type_trans(skb, ndev);
+ /*skb_checksum_none_assert(skb);*/
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* if we're doing Rx csum offload, set it up */
+ if (lp->features & XAE_FEATURE_FULL_RX_CSUM) {
+ csumstatus = (cur_p->app2 &
+ XAE_FULL_CSUM_STATUS_MASK) >> 3;
+ if (csumstatus == XAE_IP_TCP_CSUM_VALIDATED ||
+ csumstatus == XAE_IP_UDP_CSUM_VALIDATED) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ } else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
+ skb->protocol == htons(ETH_P_IP) &&
+ skb->len > 64) {
+ skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
+ skb->ip_summed = CHECKSUM_COMPLETE;
}
- } else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
- skb->protocol == htons(ETH_P_IP) &&
- skb->len > 64) {
- skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
- netif_rx(skb);
+ netif_rx(skb);
- size += length;
- packets++;
+ size += length;
+ packets++;
+ }
new_skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size);
if (!new_skb)
- return;
+ break;
phys = dma_map_single(ndev->dev.parent, new_skb->data,
lp->max_frm_size,
@@ -905,7 +912,7 @@ static void axienet_recv(struct net_device *ndev)
if (net_ratelimit())
netdev_err(ndev, "RX DMA mapping error\n");
dev_kfree_skb(new_skb);
- return;
+ break;
}
desc_set_phys_addr(lp, phys, cur_p);
@@ -913,6 +920,11 @@ static void axienet_recv(struct net_device *ndev)
cur_p->status = 0;
cur_p->skb = new_skb;
+ /* Only update tail_p to mark this slot as usable after it has
+ * been successfully refilled.
+ */
+ tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+
if (++lp->rx_bd_ci >= lp->rx_bd_num)
lp->rx_bd_ci = 0;
cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 7e4760713391ee46dc913194b33ae234389a174e ]
As the possible failure of the ioremap(), the 'local->sram' and other
two could be NULL.
Therefore it should be better to check it in order to avoid the later
dev_dbg.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ray_cs.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 0f5009c47cd0..f8409e93fe33 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -382,6 +382,8 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
local->sram = ioremap(link->resource[2]->start,
resource_size(link->resource[2]));
+ if (!local->sram)
+ goto failed;
/*** Set up 16k window for shared memory (receive buffer) ***************/
link->resource[3]->flags |=
@@ -396,6 +398,8 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
local->rmem = ioremap(link->resource[3]->start,
resource_size(link->resource[3]));
+ if (!local->rmem)
+ goto failed;
/*** Set up window for attribute memory ***********************************/
link->resource[4]->flags |=
@@ -410,6 +414,8 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
local->amem = ioremap(link->resource[4]->start,
resource_size(link->resource[4]));
+ if (!local->amem)
+ goto failed;
dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit bb225b12dbcc82d53d637d10b8d70b64494f8c16 ]
The fields of the set_ctrl_cfg_req structure have the __le32 type, so use
cpu_to_le32() to assign them. This removes the sparse warnings:
warning: incorrect type in assignment (different base types)
expected restricted __le32
got unsigned int
Link: https://lore.kernel.org/r/[email protected]
Fixes: 842784e0d15b ("pm80xx: Update For Thermal Page Code")
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 11887ac8ad0f..ed6b5e7c2136 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1202,9 +1202,11 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
else
page_code = THERMAL_PAGE_CODE_8H;
- payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
- (THERMAL_ENABLE << 8) | page_code;
- payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
+ payload.cfg_pg[0] =
+ cpu_to_le32((THERMAL_LOG_ENABLE << 9) |
+ (THERMAL_ENABLE << 8) | page_code);
+ payload.cfg_pg[1] =
+ cpu_to_le32((LTEMPHIL << 24) | (RTEMPHIL << 8));
pm8001_dbg(pm8001_ha, DEV,
"Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n",
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 97bf0395c226907e1a9b908511a35192bf1e09bb ]
Include the DECstation interrupt handler in opting out of
FPU support.
Fixes a linker error:
mips-linux-ld: arch/mips/dec/int-handler.o: in function `fpu':
(.text+0x148): undefined reference to `handle_fpe_int'
Fixes: 183b40f992c8 ("MIPS: Allow FP support to be disabled")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Maciej W. Rozycki <[email protected]>
Cc: [email protected]
Acked-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/dec/int-handler.S | 6 +++---
arch/mips/dec/setup.c | 3 ++-
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index ea5b5a83f1e1..011d1d678840 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -131,7 +131,7 @@
*/
mfc0 t0,CP0_CAUSE # get pending interrupts
mfc0 t1,CP0_STATUS
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
lw t2,cpu_fpu_mask
#endif
andi t0,ST0_IM # CAUSE.CE may be non-zero!
@@ -139,7 +139,7 @@
beqz t0,spurious
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
and t2,t0
bnez t2,fpu # handle FPU immediately
#endif
@@ -280,7 +280,7 @@ handle_it:
j dec_irq_dispatch
nop
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
fpu:
lw t0,fpu_kstat_irq
nop
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index eaad0ed4b523..99b9b29750db 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -746,7 +746,8 @@ void __init arch_init_irq(void)
dec_interrupt[DEC_IRQ_HALT] = -1;
/* Register board interrupts: FPU and cascade. */
- if (dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
+ if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT) &&
+ dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
struct irq_desc *desc_fpu;
int irq_fpu;
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit d4cb5d3c4cee28aa89b02bc33d930a6cf75e7f79 ]
ov5648_state_init() calls ov5648_state_mipi_configure() which uses
__v4l2_ctrl_s_ctrl[_int64](). This means that sensor->mutex (which
is also sensor->ctrls.handler.lock) must be locked before calling
ov5648_state_init().
ov5648_state_mipi_configure() is also used in other places where
the lock is already held so it cannot be changed itself.
Note this is based on an identical (tested) fix for the ov8865 driver,
this has only been compile-tested.
Cc: Paul Kocialkowski <[email protected]>
Reviewed-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov5648.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov5648.c b/drivers/media/i2c/ov5648.c
index 78040f0ac02f..ef8b52dc9401 100644
--- a/drivers/media/i2c/ov5648.c
+++ b/drivers/media/i2c/ov5648.c
@@ -1778,8 +1778,14 @@ static int ov5648_state_configure(struct ov5648_sensor *sensor,
static int ov5648_state_init(struct ov5648_sensor *sensor)
{
- return ov5648_state_configure(sensor, &ov5648_modes[0],
- ov5648_mbus_codes[0]);
+ int ret;
+
+ mutex_lock(&sensor->mutex);
+ ret = ov5648_state_configure(sensor, &ov5648_modes[0],
+ ov5648_mbus_codes[0]);
+ mutex_unlock(&sensor->mutex);
+
+ return ret;
}
/* Sensor Base */
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit cd2268a180117aa8ebb23e090ba204324b2d0e93 ]
The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32.
Assigning a value to it should thus use cpu_to_le32(). This fixes the
sparse warning:
warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m
got int
Link: https://lore.kernel.org/r/[email protected]
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 1e1630a1a97c..bad0c8b8cbe1 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4633,7 +4633,7 @@ int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
if (pm8001_ha->chip_id != chip_8001)
- sspTMCmd.ds_ads_m = 0x08;
+ sspTMCmd.ds_ads_m = cpu_to_le32(0x08);
circularQ = &pm8001_ha->inbnd_q_tbl[0];
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd,
sizeof(sspTMCmd), 0);
--
2.34.1
From: Oliver Hartkopp <[email protected]>
[ Upstream commit 259bdba27e32368b4404f69d613b1c1014c07cbf ]
The vxcan driver provides a pair of virtual CAN interfaces to exchange
CAN traffic between different namespaces - analogue to veth.
In opposite to the vcan driver the local sent CAN traffic on this interface
is not echo'ed back but only sent to the remote peer. This is unusual and
can be easily fixed by removing IFF_ECHO from the netdevice flags that
are set for vxcan interfaces by default at startup.
Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed
in af_can.c in can_send(). This patch makes vxcan interfaces adopt the
same local echo behavior and procedures as known from the vcan interfaces.
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/vxcan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c
index 8861a7d875e7..be5566168d0f 100644
--- a/drivers/net/can/vxcan.c
+++ b/drivers/net/can/vxcan.c
@@ -148,7 +148,7 @@ static void vxcan_setup(struct net_device *dev)
dev->hard_header_len = 0;
dev->addr_len = 0;
dev->tx_queue_len = 0;
- dev->flags = (IFF_NOARP|IFF_ECHO);
+ dev->flags = IFF_NOARP;
dev->netdev_ops = &vxcan_netdev_ops;
dev->needs_free_netdev = true;
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 59e1221f470c2e5d2f2d4c95153edd577a7071c5 ]
Since commit a05829a7222e ("cfg80211: avoid holding the RTNL when
calling the driver") we're not only holding the RTNL when going
in and out of suspend, but also the wiphy->mtx. Add that to the
D3 test debugfs in iwlwifi since it's required for various calls
to mac80211.
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <[email protected]>
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.fcec0204e162.Ib73bf787ab4d83581de20eb89b1f8dbfcaaad0e3@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index d3013a51a509..00ca17f3b263 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -2499,7 +2499,9 @@ static int iwl_mvm_d3_test_open(struct inode *inode, struct file *file)
/* start pseudo D3 */
rtnl_lock();
+ wiphy_lock(mvm->hw->wiphy);
err = __iwl_mvm_suspend(mvm->hw, mvm->hw->wiphy->wowlan_config, true);
+ wiphy_unlock(mvm->hw->wiphy);
rtnl_unlock();
if (err > 0)
err = -EINVAL;
@@ -2555,7 +2557,9 @@ static int iwl_mvm_d3_test_release(struct inode *inode, struct file *file)
iwl_fw_dbg_read_d3_debug_data(&mvm->fwrt);
rtnl_lock();
+ wiphy_lock(mvm->hw->wiphy);
__iwl_mvm_resume(mvm, true);
+ wiphy_unlock(mvm->hw->wiphy);
rtnl_unlock();
iwl_mvm_resume_tcm(mvm);
--
2.34.1
From: Jason A. Donenfeld <[email protected]>
commit ec59f128a9bd4255798abb1e06ac3b442f46ef68 upstream.
We make too nuanced use of ptr_ring to entirely move to the skb_array
wrappers, but we at least should avoid the naughty function pointer cast
when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch
uses the __skb_array_destroy_skb wrapper for the cleanup, rather than
directly providing kfree_skb, which is what other drivers in the same
situation do too.
Reported-by: PaX Team <[email protected]>
Fixes: 886fcee939ad ("wireguard: receive: use ring buffer for incoming handshakes")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireguard/queueing.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/wireguard/queueing.c
+++ b/drivers/net/wireguard/queueing.c
@@ -4,6 +4,7 @@
*/
#include "queueing.h"
+#include <linux/skb_array.h>
struct multicore_worker __percpu *
wg_packet_percpu_multicore_worker_alloc(work_func_t function, void *ptr)
@@ -42,7 +43,7 @@ void wg_packet_queue_free(struct crypt_q
{
free_percpu(queue->worker);
WARN_ON(!purge && !__ptr_ring_empty(&queue->ring));
- ptr_ring_cleanup(&queue->ring, purge ? (void(*)(void*))kfree_skb : NULL);
+ ptr_ring_cleanup(&queue->ring, purge ? __skb_array_destroy_skb : NULL);
}
#define NEXT(skb) ((skb)->prev)
From: Juergen Gross <[email protected]>
[ Upstream commit de2ae403b4c0e79a3410e63bc448542fbb9f9bfc ]
is_xen_pmu() is taking the cpu number as parameter, but it is not using
it. Instead it just tests whether the Xen PMU initialization on the
current cpu did succeed. As this test is done by checking a percpu
pointer, preemption needs to be disabled in order to avoid switching
the cpu while doing the test. While resuming from suspend() this seems
not to be the case:
[ 88.082751] ACPI: PM: Low-level resume complete
[ 88.087933] ACPI: EC: EC started
[ 88.091464] ACPI: PM: Restoring platform NVS memory
[ 88.097166] xen_acpi_processor: Uploading Xen processor PM info
[ 88.103850] Enabling non-boot CPUs ...
[ 88.108128] installing Xen timer for CPU 1
[ 88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138
[ 88.122256] caller is is_xen_pmu+0x12/0x30
[ 88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G W 5.16.13-2.fc32.qubes.x86_64 #1
[ 88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022
[ 88.145930] Call Trace:
[ 88.148757] <TASK>
[ 88.151193] dump_stack_lvl+0x48/0x5e
[ 88.155381] check_preemption_disabled+0xde/0xe0
[ 88.160641] is_xen_pmu+0x12/0x30
[ 88.164441] xen_smp_intr_init_pv+0x75/0x100
Fix that by replacing is_xen_pmu() by a simple boolean variable which
reflects the Xen PMU initialization state on cpu 0.
Modify xen_pmu_init() to return early in case it is being called for a
cpu other than cpu 0 and the boolean variable not being set.
Fixes: bf6dfb154d93 ("xen/PMU: PMU emulation code")
Reported-by: Marek Marczykowski-Górecki <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/xen/pmu.c | 10 ++++------
arch/x86/xen/pmu.h | 3 ++-
arch/x86/xen/smp_pv.c | 2 +-
3 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/x86/xen/pmu.c b/arch/x86/xen/pmu.c
index e13b0b49fcdf..d7249f4c90f1 100644
--- a/arch/x86/xen/pmu.c
+++ b/arch/x86/xen/pmu.c
@@ -512,10 +512,7 @@ irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id)
return ret;
}
-bool is_xen_pmu(int cpu)
-{
- return (get_xenpmu_data() != NULL);
-}
+bool is_xen_pmu;
void xen_pmu_init(int cpu)
{
@@ -526,7 +523,7 @@ void xen_pmu_init(int cpu)
BUILD_BUG_ON(sizeof(struct xen_pmu_data) > PAGE_SIZE);
- if (xen_hvm_domain())
+ if (xen_hvm_domain() || (cpu != 0 && !is_xen_pmu))
return;
xenpmu_data = (struct xen_pmu_data *)get_zeroed_page(GFP_KERNEL);
@@ -547,7 +544,8 @@ void xen_pmu_init(int cpu)
per_cpu(xenpmu_shared, cpu).xenpmu_data = xenpmu_data;
per_cpu(xenpmu_shared, cpu).flags = 0;
- if (cpu == 0) {
+ if (!is_xen_pmu) {
+ is_xen_pmu = true;
perf_register_guest_info_callbacks(&xen_guest_cbs);
xen_pmu_arch_init();
}
diff --git a/arch/x86/xen/pmu.h b/arch/x86/xen/pmu.h
index 0e83a160589b..65c58894fc79 100644
--- a/arch/x86/xen/pmu.h
+++ b/arch/x86/xen/pmu.h
@@ -4,6 +4,8 @@
#include <xen/interface/xenpmu.h>
+extern bool is_xen_pmu;
+
irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id);
#ifdef CONFIG_XEN_HAVE_VPMU
void xen_pmu_init(int cpu);
@@ -12,7 +14,6 @@ void xen_pmu_finish(int cpu);
static inline void xen_pmu_init(int cpu) {}
static inline void xen_pmu_finish(int cpu) {}
#endif
-bool is_xen_pmu(int cpu);
bool pmu_msr_read(unsigned int msr, uint64_t *val, int *err);
bool pmu_msr_write(unsigned int msr, uint32_t low, uint32_t high, int *err);
int pmu_apic_update(uint32_t reg);
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 477c484eb202..cd5539fc5eb4 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -129,7 +129,7 @@ int xen_smp_intr_init_pv(unsigned int cpu)
per_cpu(xen_irq_work, cpu).irq = rc;
per_cpu(xen_irq_work, cpu).name = callfunc_name;
- if (is_xen_pmu(cpu)) {
+ if (is_xen_pmu) {
pmu_name = kasprintf(GFP_KERNEL, "pmu%d", cpu);
rc = bind_virq_to_irqhandler(VIRQ_XENPMU, cpu,
xen_pmu_irq_handler,
--
2.34.1
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit e82025c623e2bf04d162bafceb66a59115814479 ]
Out-of-band data automatically places a "mark" showing wherein the
sequence the out-of-band data would have been. If the out-of-band data
implies cancelling everything sent so far, the "mark" is helpful to flush
them. When the socket's read pointer reaches the "mark", the ioctl() below
sets a non zero value to the arg `atmark`:
The out-of-band data is queued in sk->sk_receive_queue as well as ordinary
data and also saved in unix_sk(sk)->oob_skb. It can be used to test if the
head of the receive queue is the out-of-band data meaning the socket is at
the "mark".
While testing that, unix_ioctl() reads unix_sk(sk)->oob_skb locklessly.
Thus, all accesses to oob_skb need some basic protection to avoid
load/store tearing which KCSAN detects when these are called concurrently:
- ioctl(fd_a, SIOCATMARK, &atmark, sizeof(atmark))
- send(fd_b_connected_to_a, buf, sizeof(buf), MSG_OOB)
BUG: KCSAN: data-race in unix_ioctl / unix_stream_sendmsg
write to 0xffff888003d9cff0 of 8 bytes by task 175 on cpu 1:
unix_stream_sendmsg (net/unix/af_unix.c:2087 net/unix/af_unix.c:2191)
sock_sendmsg (net/socket.c:705 net/socket.c:725)
__sys_sendto (net/socket.c:2040)
__x64_sys_sendto (net/socket.c:2048)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
read to 0xffff888003d9cff0 of 8 bytes by task 176 on cpu 0:
unix_ioctl (net/unix/af_unix.c:3101 (discriminator 1))
sock_do_ioctl (net/socket.c:1128)
sock_ioctl (net/socket.c:1242)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:874 fs/ioctl.c:860 fs/ioctl.c:860)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
value changed: 0xffff888003da0c00 -> 0xffff888003da0d00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 176 Comm: unix_race_oob_i Not tainted 5.17.0-rc5-59529-g83dc4c2af682 #12
Hardware name: Red Hat KVM, BIOS 1.11.0-2.amzn2 04/01/2014
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/unix/af_unix.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index b0bfc78e421c..826ac391a7a4 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1996,7 +1996,7 @@ static int queue_oob(struct socket *sock, struct msghdr *msg, struct sock *other
if (ousk->oob_skb)
consume_skb(ousk->oob_skb);
- ousk->oob_skb = skb;
+ WRITE_ONCE(ousk->oob_skb, skb);
scm_stat_add(other, skb);
skb_queue_tail(&other->sk_receive_queue, skb);
@@ -2514,9 +2514,8 @@ static int unix_stream_recv_urg(struct unix_stream_read_state *state)
oob_skb = u->oob_skb;
- if (!(state->flags & MSG_PEEK)) {
- u->oob_skb = NULL;
- }
+ if (!(state->flags & MSG_PEEK))
+ WRITE_ONCE(u->oob_skb, NULL);
unix_state_unlock(sk);
@@ -2551,7 +2550,7 @@ static struct sk_buff *manage_oob(struct sk_buff *skb, struct sock *sk,
skb = NULL;
} else if (sock_flag(sk, SOCK_URGINLINE)) {
if (!(flags & MSG_PEEK)) {
- u->oob_skb = NULL;
+ WRITE_ONCE(u->oob_skb, NULL);
consume_skb(skb);
}
} else if (!(flags & MSG_PEEK)) {
@@ -3006,11 +3005,10 @@ static int unix_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
case SIOCATMARK:
{
struct sk_buff *skb;
- struct unix_sock *u = unix_sk(sk);
int answ = 0;
skb = skb_peek(&sk->sk_receive_queue);
- if (skb && skb == u->oob_skb)
+ if (skb && skb == READ_ONCE(unix_sk(sk)->oob_skb))
answ = 1;
err = put_user(answ, (int __user *)arg);
}
--
2.34.1
From: Anirudh Rayabharam <[email protected]>
commit 03a91c9af2c42ae14afafb829a4b7e6589ab5892 upstream.
vhost_iotlb_add_range_ctx() handles the range [0, ULONG_MAX] by
splitting it into two ranges and adding them separately. The return
value of adding the first range to the iotlb is currently ignored.
Check the return value and bail out in case of an error.
Signed-off-by: Anirudh Rayabharam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries")
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/iotlb.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/vhost/iotlb.c
+++ b/drivers/vhost/iotlb.c
@@ -62,8 +62,12 @@ int vhost_iotlb_add_range_ctx(struct vho
*/
if (start == 0 && last == ULONG_MAX) {
u64 mid = last / 2;
+ int err = vhost_iotlb_add_range_ctx(iotlb, start, mid, addr,
+ perm, opaque);
+
+ if (err)
+ return err;
- vhost_iotlb_add_range_ctx(iotlb, start, mid, addr, perm, opaque);
addr += mid + 1;
start = mid + 1;
}
From: David Stevens <[email protected]>
commit 2cbc61a1b1665c84282dbf2b1747ffa0b6248639 upstream.
Pass the non-aligned size to __iommu_dma_map when using swiotlb bounce
buffers in iommu_dma_map_page, to account for min_align_mask.
To deal with granule alignment, __iommu_dma_map maps iova_align(size +
iova_off) bytes starting at phys - iova_off. If iommu_dma_map_page
passes aligned size when using swiotlb, then this becomes
iova_align(iova_align(orig_size) + iova_off). Normally iova_off will be
zero when using swiotlb. However, this is not the case for devices that
set min_align_mask. When iova_off is non-zero, __iommu_dma_map ends up
mapping an extra page at the end of the buffer. Beyond just being a
security issue, the extra page is not cleaned up by __iommu_dma_unmap.
This causes problems when the IOVA is reused, due to collisions in the
iommu driver. Just passing the original size is sufficient, since
__iommu_dma_map will take care of granule alignment.
Fixes: 1f221a0d0dbf ("swiotlb: respect min_align_mask")
Signed-off-by: David Stevens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/dma-iommu.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -806,7 +806,6 @@ static dma_addr_t iommu_dma_map_page(str
struct iommu_domain *domain = iommu_get_dma_domain(dev);
struct iommu_dma_cookie *cookie = domain->iova_cookie;
struct iova_domain *iovad = &cookie->iovad;
- size_t aligned_size = size;
dma_addr_t iova, dma_mask = dma_get_mask(dev);
/*
@@ -815,7 +814,7 @@ static dma_addr_t iommu_dma_map_page(str
*/
if (dev_use_swiotlb(dev) && iova_offset(iovad, phys | size)) {
void *padding_start;
- size_t padding_size;
+ size_t padding_size, aligned_size;
aligned_size = iova_align(iovad, size);
phys = swiotlb_tbl_map_single(dev, phys, size, aligned_size,
@@ -840,7 +839,7 @@ static dma_addr_t iommu_dma_map_page(str
if (!coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
arch_sync_dma_for_device(phys, size, dir);
- iova = __iommu_dma_map(dev, phys, aligned_size, prot, dma_mask);
+ iova = __iommu_dma_map(dev, phys, size, prot, dma_mask);
if (iova == DMA_MAPPING_ERROR && is_swiotlb_buffer(dev, phys))
swiotlb_tbl_unmap_single(dev, phys, size, dir, attrs);
return iova;
From: Dafna Hirschfeld <[email protected]>
[ Upstream commit fbe04b49a54e31f4321d632270207f0e6304cd16 ]
If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:
[ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6
[ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14
[ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT)
[ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common]
[ 65.592395] sp : ffff800012bc3ad0
[ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8
[ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612
[ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0
[ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff
[ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78
[ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce
[ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228
[ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78
[ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880
[ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0
[ 65.598940] Call trace:
[ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common]
[ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2]
[ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2]
[ 65.601103] v4l_streamon+0x3c/0x50 [videodev]
[ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev]
[ 65.601977] video_usercopy+0x320/0x828 [videodev]
[ 65.602419] video_ioctl2+0x3c/0x58 [videodev]
[ 65.602830] v4l2_ioctl+0x60/0x90 [videodev]
[ 65.603227] __arm64_sys_ioctl+0xa8/0xe0
[ 65.603576] invoke_syscall+0x54/0x118
[ 65.603911] el0_svc_common.constprop.3+0x84/0x100
[ 65.604332] do_el0_svc+0x34/0xa0
[ 65.604625] el0_svc+0x1c/0x50
[ 65.604897] el0t_64_sync_handler+0x88/0xb0
[ 65.605264] el0t_64_sync+0x16c/0x170
[ 65.605587] ---[ end trace 578e0ba07742170d ]---
Fixes: 8ac456495a33d ("[media] stk1160: Stop device and unqueue buffers when start_streaming() fails")
Signed-off-by: Dafna Hirschfeld <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/stk1160/stk1160-core.c | 2 +-
drivers/media/usb/stk1160/stk1160-v4l.c | 10 +++++-----
drivers/media/usb/stk1160/stk1160.h | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/media/usb/stk1160/stk1160-core.c b/drivers/media/usb/stk1160/stk1160-core.c
index 4e1698f78818..ce717502ea4c 100644
--- a/drivers/media/usb/stk1160/stk1160-core.c
+++ b/drivers/media/usb/stk1160/stk1160-core.c
@@ -403,7 +403,7 @@ static void stk1160_disconnect(struct usb_interface *interface)
/* Here is the only place where isoc get released */
stk1160_uninit_isoc(dev);
- stk1160_clear_queue(dev);
+ stk1160_clear_queue(dev, VB2_BUF_STATE_ERROR);
video_unregister_device(&dev->vdev);
v4l2_device_disconnect(&dev->v4l2_dev);
diff --git a/drivers/media/usb/stk1160/stk1160-v4l.c b/drivers/media/usb/stk1160/stk1160-v4l.c
index 6a4eb616d516..1aa953469402 100644
--- a/drivers/media/usb/stk1160/stk1160-v4l.c
+++ b/drivers/media/usb/stk1160/stk1160-v4l.c
@@ -258,7 +258,7 @@ static int stk1160_start_streaming(struct stk1160 *dev)
stk1160_uninit_isoc(dev);
out_stop_hw:
usb_set_interface(dev->udev, 0, 0);
- stk1160_clear_queue(dev);
+ stk1160_clear_queue(dev, VB2_BUF_STATE_QUEUED);
mutex_unlock(&dev->v4l_lock);
@@ -306,7 +306,7 @@ static int stk1160_stop_streaming(struct stk1160 *dev)
stk1160_stop_hw(dev);
- stk1160_clear_queue(dev);
+ stk1160_clear_queue(dev, VB2_BUF_STATE_ERROR);
stk1160_dbg("streaming stopped\n");
@@ -745,7 +745,7 @@ static const struct video_device v4l_template = {
/********************************************************************/
/* Must be called with both v4l_lock and vb_queue_lock hold */
-void stk1160_clear_queue(struct stk1160 *dev)
+void stk1160_clear_queue(struct stk1160 *dev, enum vb2_buffer_state vb2_state)
{
struct stk1160_buffer *buf;
unsigned long flags;
@@ -756,7 +756,7 @@ void stk1160_clear_queue(struct stk1160 *dev)
buf = list_first_entry(&dev->avail_bufs,
struct stk1160_buffer, list);
list_del(&buf->list);
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ vb2_buffer_done(&buf->vb.vb2_buf, vb2_state);
stk1160_dbg("buffer [%p/%d] aborted\n",
buf, buf->vb.vb2_buf.index);
}
@@ -766,7 +766,7 @@ void stk1160_clear_queue(struct stk1160 *dev)
buf = dev->isoc_ctl.buf;
dev->isoc_ctl.buf = NULL;
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ vb2_buffer_done(&buf->vb.vb2_buf, vb2_state);
stk1160_dbg("buffer [%p/%d] aborted\n",
buf, buf->vb.vb2_buf.index);
}
diff --git a/drivers/media/usb/stk1160/stk1160.h b/drivers/media/usb/stk1160/stk1160.h
index a31ea1c80f25..a70963ce8753 100644
--- a/drivers/media/usb/stk1160/stk1160.h
+++ b/drivers/media/usb/stk1160/stk1160.h
@@ -166,7 +166,7 @@ struct regval {
int stk1160_vb2_setup(struct stk1160 *dev);
int stk1160_video_register(struct stk1160 *dev);
void stk1160_video_unregister(struct stk1160 *dev);
-void stk1160_clear_queue(struct stk1160 *dev);
+void stk1160_clear_queue(struct stk1160 *dev, enum vb2_buffer_state vb2_state);
/* Provided by stk1160-video.c */
int stk1160_alloc_isoc(struct stk1160 *dev);
--
2.34.1
From: Rik van Riel <[email protected]>
commit 3149c79f3cb0e2e3bafb7cfadacec090cbd250d3 upstream.
In some cases it appears the invalidation of a hwpoisoned page fails
because the page is still mapped in another process. This can cause a
program to be continuously restarted and die when it page faults on the
page that was not invalidated. Avoid that problem by unmapping the
hwpoisoned page when we find it.
Another issue is that sometimes we end up oopsing in finish_fault, if
the code tries to do something with the now-NULL vmf->page. I did not
hit this error when submitting the previous patch because there are
several opportunities for alloc_set_pte to bail out before accessing
vmf->page, and that apparently happened on those systems, and most of
the time on other systems, too.
However, across several million systems that error does occur a handful
of times a day. It can be avoided by returning VM_FAULT_NOPAGE which
will cause do_read_fault to return before calling finish_fault.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e53ac7374e64 ("mm: invalidate hwpoison page cache page in fault path")
Signed-off-by: Rik van Riel <[email protected]>
Reviewed-by: Miaohe Lin <[email protected]>
Tested-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3861,14 +3861,18 @@ static vm_fault_t __do_fault(struct vm_f
return ret;
if (unlikely(PageHWPoison(vmf->page))) {
+ struct page *page = vmf->page;
vm_fault_t poisonret = VM_FAULT_HWPOISON;
if (ret & VM_FAULT_LOCKED) {
+ if (page_mapped(page))
+ unmap_mapping_pages(page_mapping(page),
+ page->index, 1, false);
/* Retry if a clean page was removed from the cache. */
- if (invalidate_inode_page(vmf->page))
- poisonret = 0;
- unlock_page(vmf->page);
+ if (invalidate_inode_page(page))
+ poisonret = VM_FAULT_NOPAGE;
+ unlock_page(page);
}
- put_page(vmf->page);
+ put_page(page);
vmf->page = NULL;
return poisonret;
}
From: Randy Dunlap <[email protected]>
[ Upstream commit 39844b7e3084baecef52d1498b5fa81afa2cefa9 ]
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented strings "TOMOYO_loader=string1" and
"TOMOYO_trigger=string2" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
TOMOYO_trigger=string2", will be passed to user space.
and these strings are added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
TOMOYO_loader=string1
TOMOYO_trigger=string2
With this change, these __setup handlers act as expected,
and init's environment is not polluted with these strings.
Fixes: 0e4ae0e0dec63 ("TOMOYO: Make several options configurable.")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: James Morris <[email protected]>
Cc: Kentaro Takeda <[email protected]>
Cc: [email protected]
Cc: "Serge E. Hallyn" <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/tomoyo/load_policy.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/tomoyo/load_policy.c b/security/tomoyo/load_policy.c
index 3445ae6fd479..363b65be87ab 100644
--- a/security/tomoyo/load_policy.c
+++ b/security/tomoyo/load_policy.c
@@ -24,7 +24,7 @@ static const char *tomoyo_loader;
static int __init tomoyo_loader_setup(char *str)
{
tomoyo_loader = str;
- return 0;
+ return 1;
}
__setup("TOMOYO_loader=", tomoyo_loader_setup);
@@ -64,7 +64,7 @@ static const char *tomoyo_trigger;
static int __init tomoyo_trigger_setup(char *str)
{
tomoyo_trigger = str;
- return 0;
+ return 1;
}
__setup("TOMOYO_trigger=", tomoyo_trigger_setup);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 07a5dcc4bed9d7cae54adf5aa10ff9f037a3204b ]
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.
This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.
Fixes: 278d744c46fd ("remoteproc: qcom: Fix potential device node leaks")
Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/qcom_q6v5_mss.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 423b31dfa574..ca1c7387776b 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1624,18 +1624,20 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
* reserved memory regions from device's memory-region property.
*/
child = of_get_child_by_name(qproc->dev->of_node, "mba");
- if (!child)
+ if (!child) {
node = of_parse_phandle(qproc->dev->of_node,
"memory-region", 0);
- else
+ } else {
node = of_parse_phandle(child, "memory-region", 0);
+ of_node_put(child);
+ }
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret) {
dev_err(qproc->dev, "unable to resolve mba region\n");
return ret;
}
- of_node_put(node);
qproc->mba_phys = r.start;
qproc->mba_size = resource_size(&r);
@@ -1646,14 +1648,15 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
} else {
child = of_get_child_by_name(qproc->dev->of_node, "mpss");
node = of_parse_phandle(child, "memory-region", 0);
+ of_node_put(child);
}
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret) {
dev_err(qproc->dev, "unable to resolve mpss region\n");
return ret;
}
- of_node_put(node);
qproc->mpss_phys = qproc->mpss_reloc = r.start;
qproc->mpss_size = resource_size(&r);
--
2.34.1
From: Vitaly Kuznetsov <[email protected]>
commit 82c1ead0d678af31e5d883656c12096a0004178b upstream.
'struct kvm_hv_hcall' has all the required information already,
there's no need to pass 'ex' additionally.
No functional change intended.
Cc: [email protected] # 5.14.x
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/hyperv.c | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1749,7 +1749,7 @@ struct kvm_hv_hcall {
sse128_t xmm[HV_HYPERCALL_MAX_XMM_REGISTERS];
};
-static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc, bool ex)
+static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
{
int i;
gpa_t gpa;
@@ -1765,7 +1765,8 @@ static u64 kvm_hv_flush_tlb(struct kvm_v
int sparse_banks_len;
bool all_cpus;
- if (!ex) {
+ if (hc->code == HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST ||
+ hc->code == HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE) {
if (hc->fast) {
flush.address_space = hc->ingpa;
flush.flags = hc->outgpa;
@@ -2246,32 +2247,20 @@ int kvm_hv_hypercall(struct kvm_vcpu *vc
kvm_hv_hypercall_complete_userspace;
return 0;
case HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST:
- if (unlikely(!hc.rep_cnt || hc.rep_idx)) {
- ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
- break;
- }
- ret = kvm_hv_flush_tlb(vcpu, &hc, false);
- break;
- case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE:
- if (unlikely(hc.rep)) {
- ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
- break;
- }
- ret = kvm_hv_flush_tlb(vcpu, &hc, false);
- break;
case HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX:
if (unlikely(!hc.rep_cnt || hc.rep_idx)) {
ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
break;
}
- ret = kvm_hv_flush_tlb(vcpu, &hc, true);
+ ret = kvm_hv_flush_tlb(vcpu, &hc);
break;
+ case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE:
case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX:
if (unlikely(hc.rep)) {
ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
break;
}
- ret = kvm_hv_flush_tlb(vcpu, &hc, true);
+ ret = kvm_hv_flush_tlb(vcpu, &hc);
break;
case HVCALL_SEND_IPI:
if (unlikely(hc.rep)) {
From: Josef Bacik <[email protected]>
[ Upstream commit 03ddb19d2ea745228879b9334f3b550c88acb10a ]
We can either fail to find a csum entry at all and return -ENOENT, or we
can find a range that is close, but return -EFBIG. In essence these
both mean the same thing when we are doing a lookup for a csum in an
existing range, we didn't find a csum. We want to treat both of these
errors the same way, complain loudly that there wasn't a csum. This
currently happens anyway because we do
count = search_csum_tree();
if (count <= 0) {
// reloc and error handling
}
However it forces us to incorrectly treat EIO or ENOMEM errors as on
disk corruption. Fix this by returning 0 if we get either -ENOENT or
-EFBIG from btrfs_lookup_csum() so we can do proper error handling.
Reviewed-by: Boris Burkov <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/file-item.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c
index 0b9401a5afd3..161a69d7e117 100644
--- a/fs/btrfs/file-item.c
+++ b/fs/btrfs/file-item.c
@@ -303,7 +303,7 @@ static int search_csum_tree(struct btrfs_fs_info *fs_info,
read_extent_buffer(path->nodes[0], dst, (unsigned long)item,
ret * csum_size);
out:
- if (ret == -ENOENT)
+ if (ret == -ENOENT || ret == -EFBIG)
ret = 0;
return ret;
}
--
2.34.1
From: Manish Rangankar <[email protected]>
commit a7e05f7a1bcbe4ee055479242de46c5c16ab03b1 upstream.
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending
incorrect type field for NVMe supported device. Use correct feature type
field.
Link: https://lore.kernel.org/r/[email protected]
Fixes: e374f9f59281 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_gs.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -676,8 +676,7 @@ qla2x00_rff_id(scsi_qla_host_t *vha, u8
return (QLA_SUCCESS);
}
- return qla_async_rffid(vha, &vha->d_id, qlt_rff_id(vha),
- FC4_TYPE_FCP_SCSI);
+ return qla_async_rffid(vha, &vha->d_id, qlt_rff_id(vha), type);
}
static int qla_async_rffid(scsi_qla_host_t *vha, port_id_t *d_id,
@@ -729,7 +728,7 @@ static int qla_async_rffid(scsi_qla_host
/* Prepare CT arguments -- port_id, FC-4 feature, FC-4 type */
ct_req->req.rff_id.port_id = port_id_to_be_id(*d_id);
ct_req->req.rff_id.fc4_feature = fc4feature;
- ct_req->req.rff_id.fc4_type = fc4type; /* SCSI - FCP */
+ ct_req->req.rff_id.fc4_type = fc4type; /* SCSI-FCP or FC-NVMe */
sp->u.iocb_cmd.u.ctarg.req_size = RFF_ID_REQ_SIZE;
sp->u.iocb_cmd.u.ctarg.rsp_size = RFF_ID_RSP_SIZE;
From: Chao Yu <[email protected]>
[ Upstream commit f41ee8b91c00770d718be2ff4852a80017ae9ab3 ]
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215657
- Overview
UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image
- Reproduce
tested on kernel 5.17-rc4, 5.17-rc6
1. mkdir test_crash
2. cd test_crash
3. unzip tmp2.zip
4. mkdir mnt
5. ./single_test.sh f2fs 2
- Kernel dump
[ 46.434454] loop0: detected capacity change from 0 to 131072
[ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9
[ 46.738319] ================================================================================
[ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2
[ 46.738475] index 231 is out of range for type 'unsigned int [2]'
[ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1
[ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 46.738551] Call Trace:
[ 46.738556] <TASK>
[ 46.738563] dump_stack_lvl+0x47/0x5c
[ 46.738581] ubsan_epilogue+0x5/0x50
[ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80
[ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs]
[ 46.738819] do_write_page+0xef/0x210 [f2fs]
[ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs]
[ 46.739038] __write_node_page+0x2b7/0x920 [f2fs]
[ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs]
[ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs]
[ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs]
[ 46.739507] deactivate_locked_super+0x60/0xc0
[ 46.739517] deactivate_super+0x70/0xb0
[ 46.739524] cleanup_mnt+0x11a/0x200
[ 46.739532] __cleanup_mnt+0x16/0x20
[ 46.739538] task_work_run+0x67/0xa0
[ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0
[ 46.739559] syscall_exit_to_user_mode+0x26/0x40
[ 46.739568] do_syscall_64+0x46/0xb0
[ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is we missed to do sanity check on curseg->alloc_type,
result in out-of-bound accessing on sbi->block_count[] array, fix it.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/segment.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index d716553bdc02..338a57360bb8 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -4747,6 +4747,13 @@ static int sanity_check_curseg(struct f2fs_sb_info *sbi)
sanity_check_seg_type(sbi, curseg->seg_type);
+ if (curseg->alloc_type != LFS && curseg->alloc_type != SSR) {
+ f2fs_err(sbi,
+ "Current segment has invalid alloc_type:%d",
+ curseg->alloc_type);
+ return -EFSCORRUPTED;
+ }
+
if (f2fs_test_bit(blkofs, se->cur_valid_map))
goto out;
--
2.34.1
From: Jakob Koschel <[email protected]>
[ Upstream commit fa1321b11bd01752f5be2415e74a0e1a7c378262 ]
'gtm' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.
Instead of checking the pointer it should be checked if
the list is empty.
Fixes: 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support")
Signed-off-by: Jakob Koschel <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/fsl_gtm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index 8963eaffb1b7..39186ad6b3c3 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -86,7 +86,7 @@ static LIST_HEAD(gtms);
*/
struct gtm_timer *gtm_get_timer16(void)
{
- struct gtm *gtm = NULL;
+ struct gtm *gtm;
int i;
list_for_each_entry(gtm, >ms, list_node) {
@@ -103,7 +103,7 @@ struct gtm_timer *gtm_get_timer16(void)
spin_unlock_irq(>m->lock);
}
- if (gtm)
+ if (!list_empty(>ms))
return ERR_PTR(-EBUSY);
return ERR_PTR(-ENODEV);
}
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
commit 9d0f18bca3b557ae5d2128661ac06d33b3f45c0a upstream.
When compile-testing on 64-bit architectures, GCC complains about the
mismatch of types between the %d format specifier and value returned by
ARRAY_LENGTH(). Use %zu, which is correct everywhere.
Reported-by: kernel test robot <[email protected]>
Fixes: 3b588e43ee5c7 ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
@@ -1560,7 +1560,7 @@ static int npcm7xx_get_groups_count(stru
{
struct npcm7xx_pinctrl *npcm = pinctrl_dev_get_drvdata(pctldev);
- dev_dbg(npcm->dev, "group size: %d\n", ARRAY_SIZE(npcm7xx_groups));
+ dev_dbg(npcm->dev, "group size: %zu\n", ARRAY_SIZE(npcm7xx_groups));
return ARRAY_SIZE(npcm7xx_groups);
}
From: Richard Leitner <[email protected]>
[ Upstream commit 0092c25b541a5422d7e71892a13c55ee91abc34b ]
This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.
Signed-off-by: Richard Leitner <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index dd4d506683de..7f14f0d005c3 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,8 +183,8 @@
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
- "cdev1", "cdev2", "dap1", "dtb", "gma",
- "gmb", "gmc", "gmd", "gme", "gpu7",
+ "cdev1", "cdev2", "dap1", "dtb", "dtf",
+ "gma", "gmb", "gmc", "gmd", "gme", "gpu7",
"gpv", "i2cp", "irrx", "irtx", "pta",
"rm", "slxa", "slxk", "spia", "spib",
"uac";
@@ -203,7 +203,7 @@
};
conf_crtp {
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
- "dtc", "dte", "dtf", "gpu", "sdio1",
+ "dtc", "dte", "gpu", "sdio1",
"slxc", "slxd", "spdi", "spdo", "spig",
"uda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
--
2.34.1
From: Jakub Kicinski <[email protected]>
[ Upstream commit ed0c99dc0f499ff8b6e75b5ae6092ab42be1ad39 ]
tp->rx_opt.mss_clamp is not populated, yet, during TFO send so we
rise it to the local MSS. tp->mss_cache is not updated, however:
tcp_v6_connect():
tp->rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
tcp_connect():
tcp_connect_init():
tp->mss_cache = min(mtu, tp->rx_opt.mss_clamp)
tcp_send_syn_data():
tp->rx_opt.mss_clamp = tp->advmss
After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp->mss_cache. Because of the stale
tp->mss_cache value PMTU updates during TFO are always dropped.
Thanks to Wei for helping zero in on the problem and the fix!
Fixes: c7bb4b89033b ("ipv6: tcp: drop silly ICMPv6 packet too big messages")
Reported-by: Andre Nash <[email protected]>
Reported-by: Neil Spring <[email protected]>
Reviewed-by: Wei Wang <[email protected]>
Acked-by: Yuchung Cheng <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_output.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 0492f6942778..369752f5f676 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -3734,6 +3734,7 @@ static void tcp_connect_queue_skb(struct sock *sk, struct sk_buff *skb)
*/
static int tcp_send_syn_data(struct sock *sk, struct sk_buff *syn)
{
+ struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
struct tcp_fastopen_request *fo = tp->fastopen_req;
int space, err = 0;
@@ -3748,8 +3749,10 @@ static int tcp_send_syn_data(struct sock *sk, struct sk_buff *syn)
* private TCP options. The cost is reduced data space in SYN :(
*/
tp->rx_opt.mss_clamp = tcp_mss_clamp(tp, tp->rx_opt.mss_clamp);
+ /* Sync mss_cache after updating the mss_clamp */
+ tcp_sync_mss(sk, icsk->icsk_pmtu_cookie);
- space = __tcp_mtu_to_mss(sk, inet_csk(sk)->icsk_pmtu_cookie) -
+ space = __tcp_mtu_to_mss(sk, icsk->icsk_pmtu_cookie) -
MAX_TCP_OPTION_SPACE;
space = min_t(size_t, space, fo->size);
--
2.34.1
From: Matt Kramer <[email protected]>
[ Upstream commit ef248d9bd616b04df8be25539a4dc5db4b6c56f4 ]
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer <[email protected]>
Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/sound/hd-audio/models.rst | 4 ++++
sound/pci/hda/patch_realtek.c | 11 +++++++++++
2 files changed, 15 insertions(+)
diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst
index d25335993e55..9b52f50a6854 100644
--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -261,6 +261,10 @@ alc-sense-combo
huawei-mbx-stereo
Enable initialization verbs for Huawei MBX stereo speakers;
might be risky, try this at your own risk
+alc298-samsung-headphone
+ Samsung laptops with ALC298
+alc256-samsung-headphone
+ Samsung laptops with ALC256
ALC66x/67x/892
==============
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 888d049d5304..f6e5ed34dd09 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6816,6 +6816,7 @@ enum {
ALC236_FIXUP_HP_MUTE_LED,
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF,
ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
+ ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS,
ALC269VC_FIXUP_ACER_HEADSET_MIC,
@@ -8138,6 +8139,14 @@ static const struct hda_fixup alc269_fixups[] = {
{ }
},
},
+ [ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ { 0x20, AC_VERB_SET_COEF_INDEX, 0x08},
+ { 0x20, AC_VERB_SET_PROC_COEF, 0x2fcf},
+ { }
+ },
+ },
[ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = {
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
@@ -8900,6 +8909,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+ SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC),
@@ -9242,6 +9252,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
{.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"},
{.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"},
{.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"},
+ {.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"},
{.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"},
{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
{.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"},
--
2.34.1
From: Linus Torvalds <[email protected]>
[ Upstream commit 1c24a186398f59c80adb9a967486b65c1423a59d ]
This has always been the rule: fdtables have several bitmaps in them,
and as a result they have to be sized properly for bitmaps. We walk
those bitmaps in chunks of 'unsigned long' in serveral cases, but even
when we don't, we use the regular kernel bitops that are defined to work
on arrays of 'unsigned long', not on some byte array.
Now, the distinction between arrays of bytes and 'unsigned long'
normally only really ends up being noticeable on big-endian systems, but
Fedor Pchelkin and Alexey Khoroshilov reported that copy_fd_bitmaps()
could be called with an argument that wasn't even a multiple of
BITS_PER_BYTE. And then it fails to do the proper copy even on
little-endian machines.
The bug wasn't in copy_fd_bitmap(), but in sane_fdtable_size(), which
didn't actually sanitize the fdtable size sufficiently, and never made
sure it had the proper BITS_PER_LONG alignment.
That's partly because the alignment historically came not from having to
explicitly align things, but simply from previous fdtable sizes, and
from count_open_files(), which counts the file descriptors by walking
them one 'unsigned long' word at a time and thus naturally ends up doing
sizing in the proper 'chunks of unsigned long'.
But with the introduction of close_range(), we now have an external
source of "this is how many files we want to have", and so
sane_fdtable_size() needs to do a better job.
This also adds that explicit alignment to alloc_fdtable(), although
there it is mainly just for documentation at a source code level. The
arithmetic we do there to pick a reasonable fdtable size already aligns
the result sufficiently.
In fact,clang notices that the added ALIGN() in that function doesn't
actually do anything, and does not generate any extra code for it.
It turns out that gcc ends up confusing itself by combining a previous
constant-sized shift operation with the variable-sized shift operations
in roundup_pow_of_two(). And probably due to that doesn't notice that
the ALIGN() is a no-op. But that's a (tiny) gcc misfeature that doesn't
matter. Having the explicit alignment makes sense, and would actually
matter on a 128-bit architecture if we ever go there.
This also adds big comments above both functions about how fdtable sizes
have to have that BITS_PER_LONG alignment.
Fixes: 60997c3d45d9 ("close_range: add CLOSE_RANGE_UNSHARE")
Reported-by: Fedor Pchelkin <[email protected]>
Reported-by: Alexey Khoroshilov <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Tested-and-acked-by: Christian Brauner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/file.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/fs/file.c b/fs/file.c
index 97d212a9b814..c01c29417ae6 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -87,6 +87,21 @@ static void copy_fdtable(struct fdtable *nfdt, struct fdtable *ofdt)
copy_fd_bitmaps(nfdt, ofdt, ofdt->max_fds);
}
+/*
+ * Note how the fdtable bitmap allocations very much have to be a multiple of
+ * BITS_PER_LONG. This is not only because we walk those things in chunks of
+ * 'unsigned long' in some places, but simply because that is how the Linux
+ * kernel bitmaps are defined to work: they are not "bits in an array of bytes",
+ * they are very much "bits in an array of unsigned long".
+ *
+ * The ALIGN(nr, BITS_PER_LONG) here is for clarity: since we just multiplied
+ * by that "1024/sizeof(ptr)" before, we already know there are sufficient
+ * clear low bits. Clang seems to realize that, gcc ends up being confused.
+ *
+ * On a 128-bit machine, the ALIGN() would actually matter. In the meantime,
+ * let's consider it documentation (and maybe a test-case for gcc to improve
+ * its code generation ;)
+ */
static struct fdtable * alloc_fdtable(unsigned int nr)
{
struct fdtable *fdt;
@@ -102,6 +117,7 @@ static struct fdtable * alloc_fdtable(unsigned int nr)
nr /= (1024 / sizeof(struct file *));
nr = roundup_pow_of_two(nr + 1);
nr *= (1024 / sizeof(struct file *));
+ nr = ALIGN(nr, BITS_PER_LONG);
/*
* Note that this can drive nr *below* what we had passed if sysctl_nr_open
* had been set lower between the check in expand_files() and here. Deal
@@ -269,11 +285,25 @@ static unsigned int count_open_files(struct fdtable *fdt)
return i;
}
+/*
+ * Note that a sane fdtable size always has to be a multiple of
+ * BITS_PER_LONG, since we have bitmaps that are sized by this.
+ *
+ * 'max_fds' will normally already be properly aligned, but it
+ * turns out that in the close_range() -> __close_range() ->
+ * unshare_fd() -> dup_fd() -> sane_fdtable_size() we can end
+ * up having a 'max_fds' value that isn't already aligned.
+ *
+ * Rather than make close_range() have to worry about this,
+ * just make that BITS_PER_LONG alignment be part of a sane
+ * fdtable size. Becuase that's really what it is.
+ */
static unsigned int sane_fdtable_size(struct fdtable *fdt, unsigned int max_fds)
{
unsigned int count;
count = count_open_files(fdt);
+ max_fds = ALIGN(max_fds, BITS_PER_LONG);
if (max_fds < NR_OPEN_DEFAULT)
max_fds = NR_OPEN_DEFAULT;
return min(count, max_fds);
--
2.34.1
From: Takashi Sakamoto <[email protected]>
[ Upstream commit bf0cd60b7e33cf221fbe1114e4acb2c828b0af0d ]
AV/C deferred transaction was supported at a commit 00a7bb81c20f ("ALSA:
firewire-lib: Add support for deferred transaction") while 'deferrable'
flag can be uninitialized for non-control/notify AV/C transactions.
UBSAN reports it:
kernel: ================================================================================
kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9
kernel: load of value 158 is not a valid value for type '_Bool'
kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P OE 5.15.0-18-generic #18-Ubuntu
kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019
kernel: Call Trace:
kernel: <IRQ>
kernel: show_stack+0x52/0x58
kernel: dump_stack_lvl+0x4a/0x5f
kernel: dump_stack+0x10/0x12
kernel: ubsan_epilogue+0x9/0x45
kernel: __ubsan_handle_load_invalid_value.cold+0x44/0x49
kernel: fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib]
kernel: fcp_response+0x28/0x30 [snd_firewire_lib]
kernel: fw_core_handle_request+0x230/0x3d0 [firewire_core]
kernel: handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel: ? handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel: ? transmit_complete_callback+0x9f/0x120 [firewire_core]
kernel: ar_context_tasklet+0xa8/0x2e0 [firewire_ohci]
kernel: tasklet_action_common.constprop.0+0xea/0xf0
kernel: tasklet_action+0x22/0x30
kernel: __do_softirq+0xd9/0x2e3
kernel: ? irq_finalize_oneshot.part.0+0xf0/0xf0
kernel: do_softirq+0x75/0xa0
kernel: </IRQ>
kernel: <TASK>
kernel: __local_bh_enable_ip+0x50/0x60
kernel: irq_forced_thread_fn+0x7e/0x90
kernel: irq_thread+0xba/0x190
kernel: ? irq_thread_fn+0x60/0x60
kernel: kthread+0x11e/0x140
kernel: ? irq_thread_check_affinity+0xf0/0xf0
kernel: ? set_kthread_struct+0x50/0x50
kernel: ret_from_fork+0x22/0x30
kernel: </TASK>
kernel: ================================================================================
This commit fixes the bug. The bug has no disadvantage for the non-
control/notify AV/C transactions since the flag has an effect for AV/C
response with INTERIM (0x0f) status which is not used for the transactions
in AV/C general specification.
Fixes: 00a7bb81c20f ("ALSA: firewire-lib: Add support for deferred transaction")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/firewire/fcp.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/sound/firewire/fcp.c b/sound/firewire/fcp.c
index bbfbebf4affb..df44dd5dc4b2 100644
--- a/sound/firewire/fcp.c
+++ b/sound/firewire/fcp.c
@@ -240,9 +240,7 @@ int fcp_avc_transaction(struct fw_unit *unit,
t.response_match_bytes = response_match_bytes;
t.state = STATE_PENDING;
init_waitqueue_head(&t.wait);
-
- if (*(const u8 *)command == 0x00 || *(const u8 *)command == 0x03)
- t.deferrable = true;
+ t.deferrable = (*(const u8 *)command == 0x00 || *(const u8 *)command == 0x03);
spin_lock_irq(&transactions_lock);
list_add_tail(&t.list, &transactions);
--
2.34.1
From: Oliver Hartkopp <[email protected]>
[ Upstream commit 30ffd5332e06316bd69a654c06aa033872979b7c ]
When reading from an unbound can-isotp socket the syscall blocked
indefinitely. As unbound sockets (without given CAN address information)
do not make sense anyway we directly return -EADDRNOTAVAIL on read()
analogue to the known behavior from sendmsg().
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/linux-can/can-utils/issues/349
Link: https://lore.kernel.org/all/[email protected]
Suggested-by: Derek Will <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/can/isotp.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1005,12 +1005,16 @@ static int isotp_recvmsg(struct socket *
{
struct sock *sk = sock->sk;
struct sk_buff *skb;
+ struct isotp_sock *so = isotp_sk(sk);
int err = 0;
int noblock;
noblock = flags & MSG_DONTWAIT;
flags &= ~MSG_DONTWAIT;
+ if (!so->bound)
+ return -EADDRNOTAVAIL;
+
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb)
return err;
From: Anthony I Gilea <[email protected]>
[ Upstream commit ce73ef6ec67104d1fcc4c5911d77ce83288a0998 ]
HP changed the DMI identification for 2022 devices:
Product Name: HP Spectre x360 Conv 13-ap0001na
Product Name: 8709
This patch relaxes the DMI_MATCH criterion to work with all versions of this product.
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Anthony I Gilea <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soundwire/dmi-quirks.c | 2 +-
sound/soc/intel/boards/sof_sdw.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c
index 0ca2a3e3a02e..747983743a14 100644
--- a/drivers/soundwire/dmi-quirks.c
+++ b/drivers/soundwire/dmi-quirks.c
@@ -59,7 +59,7 @@ static const struct dmi_system_id adr_remap_quirk_table[] = {
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Convertible"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Conv"),
},
.driver_data = (void *)intel_tgl_bios,
},
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 76759b209906..0bf3e56e1d58 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -184,7 +184,7 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
.callback = sof_sdw_quirk_cb,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Convertible"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Conv"),
},
.driver_data = (void *)(SOF_SDW_TGL_HDMI |
SOF_SDW_PCH_DMIC |
--
2.34.1
From: Sean Christopherson <[email protected]>
commit d62007edf01f5c11f75d0f4b1e538fc52a5b1982 upstream.
Zap both valid and invalid roots when zapping/unmapping a gfn range, as
KVM must ensure it holds no references to the freed page after returning
from the unmap operation. Most notably, the TDP MMU doesn't zap invalid
roots in mmu_notifier callbacks. This leads to use-after-free and other
issues if the mmu_notifier runs to completion while an invalid root
zapper yields as KVM fails to honor the requirement that there must be
_no_ references to the page after the mmu_notifier returns.
The bug is most easily reproduced by hacking KVM to cause a collision
between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug
exists between kvm_mmu_notifier_invalidate_range_start() and memslot
updates as well. Invalidating a root ensures pages aren't accessible by
the guest, and KVM won't read or write page data itself, but KVM will
trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing
a zap of an invalid root _after_ the mmu_notifier returns is fatal.
WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm]
RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm]
Call Trace:
<TASK>
kvm_set_pfn_dirty+0xa8/0xe0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
zap_gfn_range+0x1f3/0x310 [kvm]
kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm]
kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm]
set_nx_huge_pages+0xb4/0x190 [kvm]
param_attr_store+0x70/0x100
module_attr_store+0x19/0x30
kernfs_fop_write_iter+0x119/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1cc/0x270
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Fixes: b7cccd397f31 ("KVM: x86/mmu: Fast invalidation for TDP MMU")
Cc: [email protected]
Cc: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/tdp_mmu.c | 39 ++++++++++++++++++++++++---------------
1 file changed, 24 insertions(+), 15 deletions(-)
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -99,15 +99,18 @@ void kvm_tdp_mmu_put_root(struct kvm *kv
}
/*
- * Finds the next valid root after root (or the first valid root if root
- * is NULL), takes a reference on it, and returns that next root. If root
- * is not NULL, this thread should have already taken a reference on it, and
- * that reference will be dropped. If no valid root is found, this
- * function will return NULL.
+ * Returns the next root after @prev_root (or the first root if @prev_root is
+ * NULL). A reference to the returned root is acquired, and the reference to
+ * @prev_root is released (the caller obviously must hold a reference to
+ * @prev_root if it's non-NULL).
+ *
+ * If @only_valid is true, invalid roots are skipped.
+ *
+ * Returns NULL if the end of tdp_mmu_roots was reached.
*/
static struct kvm_mmu_page *tdp_mmu_next_root(struct kvm *kvm,
struct kvm_mmu_page *prev_root,
- bool shared)
+ bool shared, bool only_valid)
{
struct kvm_mmu_page *next_root;
@@ -122,7 +125,7 @@ static struct kvm_mmu_page *tdp_mmu_next
typeof(*next_root), link);
while (next_root) {
- if (!next_root->role.invalid &&
+ if ((!only_valid || !next_root->role.invalid) &&
kvm_tdp_mmu_get_root(kvm, next_root))
break;
@@ -148,13 +151,19 @@ static struct kvm_mmu_page *tdp_mmu_next
* mode. In the unlikely event that this thread must free a root, the lock
* will be temporarily dropped and reacquired in write mode.
*/
-#define for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared) \
- for (_root = tdp_mmu_next_root(_kvm, NULL, _shared); \
- _root; \
- _root = tdp_mmu_next_root(_kvm, _root, _shared)) \
- if (kvm_mmu_page_as_id(_root) != _as_id) { \
+#define __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, _only_valid)\
+ for (_root = tdp_mmu_next_root(_kvm, NULL, _shared, _only_valid); \
+ _root; \
+ _root = tdp_mmu_next_root(_kvm, _root, _shared, _only_valid)) \
+ if (kvm_mmu_page_as_id(_root) != _as_id) { \
} else
+#define for_each_valid_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared) \
+ __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, true)
+
+#define for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared) \
+ __for_each_tdp_mmu_root_yield_safe(_kvm, _root, _as_id, _shared, false)
+
#define for_each_tdp_mmu_root(_kvm, _root, _as_id) \
list_for_each_entry_rcu(_root, &_kvm->arch.tdp_mmu_roots, link, \
lockdep_is_held_type(&kvm->mmu_lock, 0) || \
@@ -1279,7 +1288,7 @@ bool kvm_tdp_mmu_wrprot_slot(struct kvm
lockdep_assert_held_read(&kvm->mmu_lock);
- for_each_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+ for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
spte_set |= wrprot_gfn_range(kvm, root, slot->base_gfn,
slot->base_gfn + slot->npages, min_level);
@@ -1350,7 +1359,7 @@ bool kvm_tdp_mmu_clear_dirty_slot(struct
lockdep_assert_held_read(&kvm->mmu_lock);
- for_each_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+ for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
spte_set |= clear_dirty_gfn_range(kvm, root, slot->base_gfn,
slot->base_gfn + slot->npages);
@@ -1475,7 +1484,7 @@ void kvm_tdp_mmu_zap_collapsible_sptes(s
lockdep_assert_held_read(&kvm->mmu_lock);
- for_each_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
+ for_each_valid_tdp_mmu_root_yield_safe(kvm, root, slot->as_id, true)
zap_collapsible_spte_range(kvm, root, slot);
}
From: Andre Przywara <[email protected]>
[ Upstream commit f5eb04d7a0e419d61f784de3ced708259ddb71d7 ]
Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out
platform drivers") introduced CONFIG_MEDIA_PLATFORM_SUPPORT, to allow
more fine grained control over the inclusion of certain Kconfig files.
multi_v5_defconfig was selecting some drivers described in
drivers/media/platform/Kconfig, which now wasn't included anymore.
Explicitly set the new symbol in multi_v5_defconfig to bring those
drivers back.
This enables some new V4L2 and VIDEOBUF2 features, but as modules only.
Fixes: 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers")
Signed-off-by: Andre Przywara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/configs/multi_v5_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 80a3ae02d759..6f789e8483c9 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -188,6 +188,7 @@ CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_ASPEED=m
CONFIG_VIDEO_ATMEL_ISI=m
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit 2c39a01154ea57d596470afa1d278e3be3b37f6a ]
The TrekStor SurfTab duo W1 10.1 has a hw bug where turning eldo2 back on
after having turned it off causes the CPLM3218 ambient-light-sensor on
the front camera sensor's I2C bus to crash, hanging the bus.
Add a DMI quirk table for systems on which to leave eldo2 on.
Note an alternative fix is to turn off the CPLM3218 ambient-light-sensor
as long as the camera sensor is being used, this is what Windows seems
to do as a workaround (based on analyzing the DSDT). But that is not
easy to do cleanly under Linux.
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../media/atomisp/pci/atomisp_gmin_platform.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
index 62dc06e22476..cd0a771454da 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
@@ -729,6 +729,21 @@ static int axp_regulator_set(struct device *dev, struct gmin_subdev *gs,
return 0;
}
+/*
+ * Some boards contain a hw-bug where turning eldo2 back on after having turned
+ * it off causes the CPLM3218 ambient-light-sensor on the image-sensor's I2C bus
+ * to crash, hanging the bus. Do not turn eldo2 off on these systems.
+ */
+static const struct dmi_system_id axp_leave_eldo2_on_ids[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TrekStor"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SurfTab duo W1 10.1 (VT4)"),
+ },
+ },
+ { }
+};
+
static int axp_v1p8_on(struct device *dev, struct gmin_subdev *gs)
{
int ret;
@@ -763,6 +778,9 @@ static int axp_v1p8_off(struct device *dev, struct gmin_subdev *gs)
if (ret)
return ret;
+ if (dmi_check_system(axp_leave_eldo2_on_ids))
+ return 0;
+
ret = axp_regulator_set(dev, gs, gs->eldo2_sel_reg, gs->eldo2_1p8v,
ELDO_CTRL_REG, gs->eldo2_ctrl_shift, false);
return ret;
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit a56b1b0f145ef2d6bb9312dedf3ab8558ef50a5b ]
mac80211 provides aid in vif->bss_conf.aid for sta mode and not in
sta->aid. Fix mt7915_mcu_wtbl_generic_tlv routine using proper value for
aid in sta mode.
Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 7440f2b443ec..b157db9f8903 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1396,8 +1396,11 @@ mt7915_mcu_wtbl_generic_tlv(struct sk_buff *skb, struct ieee80211_vif *vif,
generic = (struct wtbl_generic *)tlv;
if (sta) {
+ if (vif->type == NL80211_IFTYPE_STATION)
+ generic->partial_aid = cpu_to_le16(vif->bss_conf.aid);
+ else
+ generic->partial_aid = cpu_to_le16(sta->aid);
memcpy(generic->peer_addr, sta->addr, ETH_ALEN);
- generic->partial_aid = cpu_to_le16(sta->aid);
generic->muar_idx = mvif->omac_idx;
generic->qos = sta->wme;
} else {
--
2.34.1
From: Andre Przywara <[email protected]>
[ Upstream commit 9c44d0805f949c56121b4ae6949fb064537bf198 ]
Commit 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
led to de-selection of CONFIG_FB, which was a prerequisite for
BACKLIGHT_CLASS_DEVICE, which CONFIG_DRM_PANEL_SIMPLE depended on.
Explicitly set CONFIG_FB, to bring DRM_PANEL_SIMPLE, DRM_PANEL_EDP,
FB_IMX and FB_ATMEL back into the generated .config.
This also adds some new FB related features like fonts and the
framebuffer console.
See also commit 8c1768967e27 ("ARM: config: mutli v7: Reenable FB
dependency"), which solved the same problem for multi_v7_defconfig.
This relies on [1], to fix a broken Kconfig dependency.
[1] https://lore.kernel.org/dri-devel/[email protected]/raw
Fixes: 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
Signed-off-by: Andre Przywara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/configs/multi_v5_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 6f789e8483c9..e883cb6dc645 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -196,6 +196,7 @@ CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=m
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
--
2.34.1
From: Arnd Bergmann <[email protected]>
commit 9d67412f24cc3a2c05f35f7c856addb07a2960ce upstream.
iop32x is one of the last platforms to use IRQ 0, and this has apparently
stopped working in a 2014 cleanup without anyone noticing. This interrupt
is used for the DMA engine, so most likely this has not actually worked
in the past 7 years, but it's also not essential for using this board.
I'm splitting out this change from my GENERIC_IRQ_MULTI_HANDLER
conversion so it can be backported if anyone cares.
Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: Arnd Bergmann <[email protected]>
[ardb: take +1 offset into account in mask/unmask and init as well]
Signed-off-by: Ard Biesheuvel <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Tested-by: Vladimir Murzin <[email protected]> # ARMv7M
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-iop32x/include/mach/entry-macro.S | 2
arch/arm/mach-iop32x/include/mach/irqs.h | 2
arch/arm/mach-iop32x/irq.c | 6 +-
arch/arm/mach-iop32x/irqs.h | 60 ++++++++++++------------
4 files changed, 37 insertions(+), 33 deletions(-)
--- a/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -20,7 +20,7 @@
mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
cmp \irqstat, #0
clzne \irqnr, \irqstat
- rsbne \irqnr, \irqnr, #31
+ rsbne \irqnr, \irqnr, #32
.endm
.macro arch_ret_to_user, tmp1, tmp2
--- a/arch/arm/mach-iop32x/include/mach/irqs.h
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -9,6 +9,6 @@
#ifndef __IRQS_H
#define __IRQS_H
-#define NR_IRQS 32
+#define NR_IRQS 33
#endif
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -32,14 +32,14 @@ static void intstr_write(u32 val)
static void
iop32x_irq_mask(struct irq_data *d)
{
- iop32x_mask &= ~(1 << d->irq);
+ iop32x_mask &= ~(1 << (d->irq - 1));
intctl_write(iop32x_mask);
}
static void
iop32x_irq_unmask(struct irq_data *d)
{
- iop32x_mask |= 1 << d->irq;
+ iop32x_mask |= 1 << (d->irq - 1);
intctl_write(iop32x_mask);
}
@@ -65,7 +65,7 @@ void __init iop32x_init_irq(void)
machine_is_em7210())
*IOP3XX_PCIIRSR = 0x0f;
- for (i = 0; i < NR_IRQS; i++) {
+ for (i = 1; i < NR_IRQS; i++) {
irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
}
--- a/arch/arm/mach-iop32x/irqs.h
+++ b/arch/arm/mach-iop32x/irqs.h
@@ -7,36 +7,40 @@
#ifndef __IOP32X_IRQS_H
#define __IOP32X_IRQS_H
+/* Interrupts in Linux start at 1, hardware starts at 0 */
+
+#define IOP_IRQ(x) ((x) + 1)
+
/*
* IOP80321 chipset interrupts
*/
-#define IRQ_IOP32X_DMA0_EOT 0
-#define IRQ_IOP32X_DMA0_EOC 1
-#define IRQ_IOP32X_DMA1_EOT 2
-#define IRQ_IOP32X_DMA1_EOC 3
-#define IRQ_IOP32X_AA_EOT 6
-#define IRQ_IOP32X_AA_EOC 7
-#define IRQ_IOP32X_CORE_PMON 8
-#define IRQ_IOP32X_TIMER0 9
-#define IRQ_IOP32X_TIMER1 10
-#define IRQ_IOP32X_I2C_0 11
-#define IRQ_IOP32X_I2C_1 12
-#define IRQ_IOP32X_MESSAGING 13
-#define IRQ_IOP32X_ATU_BIST 14
-#define IRQ_IOP32X_PERFMON 15
-#define IRQ_IOP32X_CORE_PMU 16
-#define IRQ_IOP32X_BIU_ERR 17
-#define IRQ_IOP32X_ATU_ERR 18
-#define IRQ_IOP32X_MCU_ERR 19
-#define IRQ_IOP32X_DMA0_ERR 20
-#define IRQ_IOP32X_DMA1_ERR 21
-#define IRQ_IOP32X_AA_ERR 23
-#define IRQ_IOP32X_MSG_ERR 24
-#define IRQ_IOP32X_SSP 25
-#define IRQ_IOP32X_XINT0 27
-#define IRQ_IOP32X_XINT1 28
-#define IRQ_IOP32X_XINT2 29
-#define IRQ_IOP32X_XINT3 30
-#define IRQ_IOP32X_HPI 31
+#define IRQ_IOP32X_DMA0_EOT IOP_IRQ(0)
+#define IRQ_IOP32X_DMA0_EOC IOP_IRQ(1)
+#define IRQ_IOP32X_DMA1_EOT IOP_IRQ(2)
+#define IRQ_IOP32X_DMA1_EOC IOP_IRQ(3)
+#define IRQ_IOP32X_AA_EOT IOP_IRQ(6)
+#define IRQ_IOP32X_AA_EOC IOP_IRQ(7)
+#define IRQ_IOP32X_CORE_PMON IOP_IRQ(8)
+#define IRQ_IOP32X_TIMER0 IOP_IRQ(9)
+#define IRQ_IOP32X_TIMER1 IOP_IRQ(10)
+#define IRQ_IOP32X_I2C_0 IOP_IRQ(11)
+#define IRQ_IOP32X_I2C_1 IOP_IRQ(12)
+#define IRQ_IOP32X_MESSAGING IOP_IRQ(13)
+#define IRQ_IOP32X_ATU_BIST IOP_IRQ(14)
+#define IRQ_IOP32X_PERFMON IOP_IRQ(15)
+#define IRQ_IOP32X_CORE_PMU IOP_IRQ(16)
+#define IRQ_IOP32X_BIU_ERR IOP_IRQ(17)
+#define IRQ_IOP32X_ATU_ERR IOP_IRQ(18)
+#define IRQ_IOP32X_MCU_ERR IOP_IRQ(19)
+#define IRQ_IOP32X_DMA0_ERR IOP_IRQ(20)
+#define IRQ_IOP32X_DMA1_ERR IOP_IRQ(21)
+#define IRQ_IOP32X_AA_ERR IOP_IRQ(23)
+#define IRQ_IOP32X_MSG_ERR IOP_IRQ(24)
+#define IRQ_IOP32X_SSP IOP_IRQ(25)
+#define IRQ_IOP32X_XINT0 IOP_IRQ(27)
+#define IRQ_IOP32X_XINT1 IOP_IRQ(28)
+#define IRQ_IOP32X_XINT2 IOP_IRQ(29)
+#define IRQ_IOP32X_XINT3 IOP_IRQ(30)
+#define IRQ_IOP32X_HPI IOP_IRQ(31)
#endif
From: Miaohe Lin <[email protected]>
[ Upstream commit 0cbcc92917c5de80f15c24d033566539ad696892 ]
Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem
memory"), we could get a resource allocated during boot via
alloc_resource(). And it's required to release the resource using
free_resource(). Howerver, many people use kfree directly which will
result in kernel BUG. In order to fix this without fixing every call
site, just leak a couple of bytes in such corner case.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory")
Signed-off-by: Miaohe Lin <[email protected]>
Suggested-by: David Hildenbrand <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Alistair Popple <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/resource.c | 41 ++++++++---------------------------------
1 file changed, 8 insertions(+), 33 deletions(-)
diff --git a/kernel/resource.c b/kernel/resource.c
index ca9f5198a01f..20e10e48f052 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -56,14 +56,6 @@ struct resource_constraint {
static DEFINE_RWLOCK(resource_lock);
-/*
- * For memory hotplug, there is no way to free resource entries allocated
- * by boot mem after the system is up. So for reusing the resource entry
- * we need to remember the resource.
- */
-static struct resource *bootmem_resource_free;
-static DEFINE_SPINLOCK(bootmem_resource_lock);
-
static struct resource *next_resource(struct resource *p)
{
if (p->child)
@@ -148,36 +140,19 @@ __initcall(ioresources_init);
static void free_resource(struct resource *res)
{
- if (!res)
- return;
-
- if (!PageSlab(virt_to_head_page(res))) {
- spin_lock(&bootmem_resource_lock);
- res->sibling = bootmem_resource_free;
- bootmem_resource_free = res;
- spin_unlock(&bootmem_resource_lock);
- } else {
+ /**
+ * If the resource was allocated using memblock early during boot
+ * we'll leak it here: we can only return full pages back to the
+ * buddy and trying to be smart and reusing them eventually in
+ * alloc_resource() overcomplicates resource handling.
+ */
+ if (res && PageSlab(virt_to_head_page(res)))
kfree(res);
- }
}
static struct resource *alloc_resource(gfp_t flags)
{
- struct resource *res = NULL;
-
- spin_lock(&bootmem_resource_lock);
- if (bootmem_resource_free) {
- res = bootmem_resource_free;
- bootmem_resource_free = res->sibling;
- }
- spin_unlock(&bootmem_resource_lock);
-
- if (res)
- memset(res, 0, sizeof(struct resource));
- else
- res = kzalloc(sizeof(struct resource), flags);
-
- return res;
+ return kzalloc(sizeof(struct resource), flags);
}
/* Return the conflict entry if you can't request it */
--
2.34.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit c91a5b1c221a58d008485cf7d02ccce73108b119 ]
The function device_create_file() in huawei_wmi_battery_add() can fail,
so its return value should be checked.
Fixes: 355a070b09ab ("platform/x86: huawei-wmi: Add battery charging thresholds")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/huawei-wmi.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/huawei-wmi.c b/drivers/platform/x86/huawei-wmi.c
index a2d846c4a7ee..eac3e6b4ea11 100644
--- a/drivers/platform/x86/huawei-wmi.c
+++ b/drivers/platform/x86/huawei-wmi.c
@@ -470,10 +470,17 @@ static DEVICE_ATTR_RW(charge_control_thresholds);
static int huawei_wmi_battery_add(struct power_supply *battery)
{
- device_create_file(&battery->dev, &dev_attr_charge_control_start_threshold);
- device_create_file(&battery->dev, &dev_attr_charge_control_end_threshold);
+ int err = 0;
- return 0;
+ err = device_create_file(&battery->dev, &dev_attr_charge_control_start_threshold);
+ if (err)
+ return err;
+
+ err = device_create_file(&battery->dev, &dev_attr_charge_control_end_threshold);
+ if (err)
+ device_remove_file(&battery->dev, &dev_attr_charge_control_start_threshold);
+
+ return err;
}
static int huawei_wmi_battery_remove(struct power_supply *battery)
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit 2cc7cc01c15f57d056318c33705647f87dcd4aab ]
Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.
Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression
Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Dave Kleikamp <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jfs/jfs_dmap.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 91f4ec93dab1..d8502f4989d9 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -148,6 +148,7 @@ static const s8 budtab[256] = {
* 0 - success
* -ENOMEM - insufficient memory
* -EIO - i/o error
+ * -EINVAL - wrong bmap data
*/
int dbMount(struct inode *ipbmap)
{
@@ -179,6 +180,12 @@ int dbMount(struct inode *ipbmap)
bmp->db_nfree = le64_to_cpu(dbmp_le->dn_nfree);
bmp->db_l2nbperpage = le32_to_cpu(dbmp_le->dn_l2nbperpage);
bmp->db_numag = le32_to_cpu(dbmp_le->dn_numag);
+ if (!bmp->db_numag) {
+ release_metapage(mp);
+ kfree(bmp);
+ return -EINVAL;
+ }
+
bmp->db_maxlevel = le32_to_cpu(dbmp_le->dn_maxlevel);
bmp->db_maxag = le32_to_cpu(dbmp_le->dn_maxag);
bmp->db_agpref = le32_to_cpu(dbmp_le->dn_agpref);
--
2.34.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit de9b861018d46af27a5edff8b6baef35c0c0ad4f ]
The checker failed to validate all enum IDs in the description of a
register with fixed-width register fields, due to a miscalculation of
the number of described states: each register field of n bits can have
"1 << n" possible states, not "1".
Increase SH_PFC_MAX_ENUMS accordingly, now more enum IDs are checked
(SH-Mobile AG5 has more than 4000 enum IDs defined).
Fixes: 12d057bad683b1c6 ("pinctrl: sh-pfc: checker: Add check for enum ID conflicts")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/6d8a6a05564f38f9d20464c1c17f96e52740cf6a.1645460429.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/renesas/core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
index f29130957e49..bc17f3131de5 100644
--- a/drivers/pinctrl/renesas/core.c
+++ b/drivers/pinctrl/renesas/core.c
@@ -739,7 +739,7 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
#ifdef DEBUG
#define SH_PFC_MAX_REGS 300
-#define SH_PFC_MAX_ENUMS 3000
+#define SH_PFC_MAX_ENUMS 5000
static unsigned int sh_pfc_errors __initdata = 0;
static unsigned int sh_pfc_warnings __initdata = 0;
@@ -851,7 +851,8 @@ static void __init sh_pfc_check_cfg_reg(const char *drvname,
sh_pfc_check_reg(drvname, cfg_reg->reg);
if (cfg_reg->field_width) {
- n = cfg_reg->reg_width / cfg_reg->field_width;
+ fw = cfg_reg->field_width;
+ n = (cfg_reg->reg_width / fw) << fw;
/* Skip field checks (done at build time) */
goto check_enum_ids;
}
--
2.34.1
From: Paolo Valente <[email protected]>
[ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ]
A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").
So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503
Reported-by: Holger Hoffstätte <[email protected]>
Signed-off-by: Paolo Valente <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-iosched.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 9843085cc2c3..63d2d66dece5 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -2662,6 +2662,15 @@ bfq_setup_merge(struct bfq_queue *bfqq, struct bfq_queue *new_bfqq)
* are likely to increase the throughput.
*/
bfqq->new_bfqq = new_bfqq;
+ /*
+ * The above assignment schedules the following redirections:
+ * each time some I/O for bfqq arrives, the process that
+ * generated that I/O is disassociated from bfqq and
+ * associated with new_bfqq. Here we increases new_bfqq->ref
+ * in advance, adding the number of processes that are
+ * expected to be associated with new_bfqq as they happen to
+ * issue I/O.
+ */
new_bfqq->ref += process_refs;
return new_bfqq;
}
@@ -2724,6 +2733,10 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
{
struct bfq_queue *in_service_bfqq, *new_bfqq;
+ /* if a merge has already been setup, then proceed with that first */
+ if (bfqq->new_bfqq)
+ return bfqq->new_bfqq;
+
/*
* Check delayed stable merge for rotational or non-queueing
* devs. For this branch to be executed, bfqq must not be
@@ -2825,9 +2838,6 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
if (bfq_too_late_for_merging(bfqq))
return NULL;
- if (bfqq->new_bfqq)
- return bfqq->new_bfqq;
-
if (!io_struct || unlikely(bfqq == &bfqd->oom_bfqq))
return NULL;
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ]
Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.
In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.
htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy
Fail logs:
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_hst.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index 510e61e97dbc..994ec48b2f66 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -30,6 +30,7 @@ static int htc_issue_send(struct htc_target *target, struct sk_buff* skb,
hdr->endpoint_id = epid;
hdr->flags = flags;
hdr->payload_len = cpu_to_be16(len);
+ memset(hdr->control, 0, sizeof(hdr->control));
status = target->hif->send(target->hif_dev, endpoint->ul_pipeid, skb);
@@ -272,6 +273,10 @@ int htc_connect_service(struct htc_target *target,
conn_msg->dl_pipeid = endpoint->dl_pipeid;
conn_msg->ul_pipeid = endpoint->ul_pipeid;
+ /* To prevent infoleak */
+ conn_msg->svc_meta_len = 0;
+ conn_msg->pad = 0;
+
ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0);
if (ret)
goto err;
--
2.34.1
From: Herbert Xu <[email protected]>
[ Upstream commit dfe085d8dcd0bb1fe20cc2327e81c8064cead441 ]
The xts module needs ecb to be present as it's meant to work
on top of ecb. This patch adds a softdep so ecb can be included
automatically into the initramfs.
Reported-by: rftc <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/xts.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/crypto/xts.c b/crypto/xts.c
index 6c12f30dbdd6..63c85b9e64e0 100644
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -466,3 +466,4 @@ MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("XTS block cipher mode");
MODULE_ALIAS_CRYPTO("xts");
MODULE_IMPORT_NS(CRYPTO_INTERNAL);
+MODULE_SOFTDEP("pre: ecb");
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit 32d53c0aa3a7b727243473949bad2a830b908edc ]
There's a kernel BUG splat on processing aux critical error
interrupts in ice_misc_intr():
[ 2100.917085] BUG: scheduling while atomic: swapper/15/0/0x00010000
...
[ 2101.060770] Call Trace:
[ 2101.063229] <IRQ>
[ 2101.065252] dump_stack+0x41/0x60
[ 2101.068587] __schedule_bug.cold.100+0x4c/0x58
[ 2101.073060] __schedule+0x6a4/0x830
[ 2101.076570] schedule+0x35/0xa0
[ 2101.079727] schedule_preempt_disabled+0xa/0x10
[ 2101.084284] __mutex_lock.isra.7+0x310/0x420
[ 2101.088580] ? ice_misc_intr+0x201/0x2e0 [ice]
[ 2101.093078] ice_send_event_to_aux+0x25/0x70 [ice]
[ 2101.097921] ice_misc_intr+0x220/0x2e0 [ice]
[ 2101.102232] __handle_irq_event_percpu+0x40/0x180
[ 2101.106965] handle_irq_event_percpu+0x30/0x80
[ 2101.111434] handle_irq_event+0x36/0x53
[ 2101.115292] handle_edge_irq+0x82/0x190
[ 2101.119148] handle_irq+0x1c/0x30
[ 2101.122480] do_IRQ+0x49/0xd0
[ 2101.125465] common_interrupt+0xf/0xf
[ 2101.129146] </IRQ>
...
As Andrew correctly mentioned previously[0], the following call
ladder happens:
ice_misc_intr() <- hardirq
ice_send_event_to_aux()
device_lock()
mutex_lock()
might_sleep()
might_resched() <- oops
Add a new PF state bit which indicates that an aux critical error
occurred and serve it in ice_service_task() in process context.
The new ice_pf::oicr_err_reg is read-write in both hardirq and
process contexts, but only 3 bits of non-critical data probably
aren't worth explicit synchronizing (and they're even in the same
byte [31:24]).
[0] https://lore.kernel.org/all/[email protected]
Fixes: 348048e724a0e ("ice: Implement iidc operations")
Signed-off-by: Alexander Lobakin <[email protected]>
Tested-by: Michal Kubiak <[email protected]>
Acked-by: Tony Nguyen <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice.h | 2 ++
drivers/net/ethernet/intel/ice/ice_main.c | 25 ++++++++++++++---------
2 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 16b63f727efa..7e5daede3a2e 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -241,6 +241,7 @@ enum ice_pf_state {
ICE_LINK_DEFAULT_OVERRIDE_PENDING,
ICE_PHY_INIT_COMPLETE,
ICE_FD_VF_FLUSH_CTX, /* set at FD Rx IRQ or timeout */
+ ICE_AUX_ERR_PENDING,
ICE_STATE_NBITS /* must be last */
};
@@ -464,6 +465,7 @@ struct ice_pf {
wait_queue_head_t reset_wait_queue;
u32 hw_csum_rx_error;
+ u32 oicr_err_reg;
u16 oicr_idx; /* Other interrupt cause MSIX vector index */
u16 num_avail_sw_msix; /* remaining MSIX SW vectors left unclaimed */
u16 max_pf_txqs; /* Total Tx queues PF wide */
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 524e6e65dc9d..7f68132b8a1f 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -2143,6 +2143,19 @@ static void ice_service_task(struct work_struct *work)
return;
}
+ if (test_and_clear_bit(ICE_AUX_ERR_PENDING, pf->state)) {
+ struct iidc_event *event;
+
+ event = kzalloc(sizeof(*event), GFP_KERNEL);
+ if (event) {
+ set_bit(IIDC_EVENT_CRIT_ERR, event->type);
+ /* report the entire OICR value to AUX driver */
+ swap(event->reg, pf->oicr_err_reg);
+ ice_send_event_to_aux(pf, event);
+ kfree(event);
+ }
+ }
+
if (test_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags)) {
/* Plug aux device per request */
ice_plug_aux_dev(pf);
@@ -2881,17 +2894,9 @@ static irqreturn_t ice_misc_intr(int __always_unused irq, void *data)
#define ICE_AUX_CRIT_ERR (PFINT_OICR_PE_CRITERR_M | PFINT_OICR_HMC_ERR_M | PFINT_OICR_PE_PUSH_M)
if (oicr & ICE_AUX_CRIT_ERR) {
- struct iidc_event *event;
-
+ pf->oicr_err_reg |= oicr;
+ set_bit(ICE_AUX_ERR_PENDING, pf->state);
ena_mask &= ~ICE_AUX_CRIT_ERR;
- event = kzalloc(sizeof(*event), GFP_ATOMIC);
- if (event) {
- set_bit(IIDC_EVENT_CRIT_ERR, event->type);
- /* report the entire OICR value to AUX driver */
- event->reg = oicr;
- ice_send_event_to_aux(pf, event);
- kfree(event);
- }
}
/* Report any remaining unexpected interrupts */
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 3e68f331c8c759c0daa31cc92c3449b23119a215 ]
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.
Fixes: 2c22120fbd01 ("MTD: OneNAND: interrupt based wait support")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/onenand/generic.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/onenand/generic.c b/drivers/mtd/nand/onenand/generic.c
index 8b6f4da5d720..a4b8b65fe15f 100644
--- a/drivers/mtd/nand/onenand/generic.c
+++ b/drivers/mtd/nand/onenand/generic.c
@@ -53,7 +53,12 @@ static int generic_onenand_probe(struct platform_device *pdev)
}
info->onenand.mmcontrol = pdata ? pdata->mmcontrol : NULL;
- info->onenand.irq = platform_get_irq(pdev, 0);
+
+ err = platform_get_irq(pdev, 0);
+ if (err < 0)
+ goto out_iounmap;
+
+ info->onenand.irq = err;
info->mtd.dev.parent = &pdev->dev;
info->mtd.priv = &info->onenand;
--
2.34.1
From: Michael Walle <[email protected]>
[ Upstream commit 7996c5f5ec7a20b3f6b8fae93fcf3cb8f1c01743 ]
Protect any RMW access to the registers by a spinlock.
Fixes: 7e5ea974e61c ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Michael Walle <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-microchip-sgpio.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 78765faa245a..dfa374195694 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/reset.h>
+#include <linux/spinlock.h>
#include "core.h"
#include "pinconf.h"
@@ -115,6 +116,7 @@ struct sgpio_priv {
u32 clock;
u32 __iomem *regs;
const struct sgpio_properties *properties;
+ spinlock_t lock;
};
struct sgpio_port_addr {
@@ -216,6 +218,7 @@ static void sgpio_output_set(struct sgpio_priv *priv,
int value)
{
unsigned int bit = SGPIO_SRC_BITS * addr->bit;
+ unsigned long flags;
u32 clr, set;
switch (priv->properties->arch) {
@@ -234,7 +237,10 @@ static void sgpio_output_set(struct sgpio_priv *priv,
default:
return;
}
+
+ spin_lock_irqsave(&priv->lock, flags);
sgpio_clrsetbits(priv, REG_PORT_CONFIG, addr->port, clr, set);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
static int sgpio_output_get(struct sgpio_priv *priv,
@@ -562,10 +568,13 @@ static void microchip_sgpio_irq_settype(struct irq_data *data,
struct sgpio_bank *bank = gpiochip_get_data(chip);
unsigned int gpio = irqd_to_hwirq(data);
struct sgpio_port_addr addr;
+ unsigned long flags;
u32 ena;
sgpio_pin_to_addr(bank->priv, gpio, &addr);
+ spin_lock_irqsave(&bank->priv->lock, flags);
+
/* Disable interrupt while changing type */
ena = sgpio_readl(bank->priv, REG_INT_ENABLE, addr.bit);
sgpio_writel(bank->priv, ena & ~BIT(addr.port), REG_INT_ENABLE, addr.bit);
@@ -582,6 +591,8 @@ static void microchip_sgpio_irq_settype(struct irq_data *data,
/* Possibly re-enable interrupts */
sgpio_writel(bank->priv, ena, REG_INT_ENABLE, addr.bit);
+
+ spin_unlock_irqrestore(&bank->priv->lock, flags);
}
static void microchip_sgpio_irq_setreg(struct irq_data *data,
@@ -592,13 +603,16 @@ static void microchip_sgpio_irq_setreg(struct irq_data *data,
struct sgpio_bank *bank = gpiochip_get_data(chip);
unsigned int gpio = irqd_to_hwirq(data);
struct sgpio_port_addr addr;
+ unsigned long flags;
sgpio_pin_to_addr(bank->priv, gpio, &addr);
+ spin_lock_irqsave(&bank->priv->lock, flags);
if (clear)
sgpio_clrsetbits(bank->priv, reg, addr.bit, BIT(addr.port), 0);
else
sgpio_clrsetbits(bank->priv, reg, addr.bit, 0, BIT(addr.port));
+ spin_unlock_irqrestore(&bank->priv->lock, flags);
}
static void microchip_sgpio_irq_mask(struct irq_data *data)
@@ -814,6 +828,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
return -ENOMEM;
priv->dev = dev;
+ spin_lock_init(&priv->lock);
reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch");
if (IS_ERR(reset))
--
2.34.1
From: Yang Guang <[email protected]>
[ Upstream commit 24565bc4115961db7ee64fcc7ad2a7437c0d0a49 ]
coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Yang Guang <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
index 8d8b5ff7d43c..3696eb09b69b 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
@@ -476,7 +476,7 @@ static ssize_t show_cabc_available_modes(struct device *dev,
int i;
if (!ddata->has_cabc)
- return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+ return sysfs_emit(buf, "%s\n", cabc_modes[0]);
for (i = 0, len = 0;
len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
--
2.34.1
From: Håkon Bugge <[email protected]>
[ Upstream commit 748663c8ccf6b2e5a800de19127c2cc1c4423fd2 ]
XRC INI QPs should be able to adjust their local ACK timeout.
Fixes: 2c1619edef61 ("IB/cma: Define option to set ack timeout and pack tos_set")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Håkon Bugge <[email protected]>
Suggested-by: Avneesh Pant <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index db7b5de3bc76..a814dabcdff4 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2640,7 +2640,7 @@ int rdma_set_ack_timeout(struct rdma_cm_id *id, u8 timeout)
{
struct rdma_id_private *id_priv;
- if (id->qp_type != IB_QPT_RC)
+ if (id->qp_type != IB_QPT_RC && id->qp_type != IB_QPT_XRC_INI)
return -EINVAL;
id_priv = container_of(id, struct rdma_id_private, id);
--
2.34.1
From: Herbert Xu <[email protected]>
commit c8bd296cca3434b13b28b074eaeb78a23284de77 upstream.
The algorithm __cbc-aes-neonbs requires a fallback so we need
to select the config options for them or otherwise it will fail
to register on boot-up.
Fixes: 00b99ad2bac2 ("crypto: arm/aes-neonbs - Use generic cbc...")
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/crypto/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -102,6 +102,8 @@ config CRYPTO_AES_ARM_BS
depends on KERNEL_MODE_NEON
select CRYPTO_SKCIPHER
select CRYPTO_LIB_AES
+ select CRYPTO_AES
+ select CRYPTO_CBC
select CRYPTO_SIMD
help
Use a faster and more secure NEON based implementation of AES in CBC,
From: Zev Weiss <[email protected]>
[ Upstream commit a603ca60cebff8589882427a67f870ed946b3fc8 ]
Commit 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to
set up register mapping") fixed a bug that had, as a side-effect,
prevented the 8250_aspeed_vuart driver from enabling the VUART's
FIFOs. However, fixing that (and hence enabling the FIFOs) has in
turn revealed what appears to be a hardware bug in the ASPEED VUART in
which the host-side THRE bit doesn't get if the BMC-side receive FIFO
trigger level is set to anything but one byte. This causes problems
for polled-mode writes from the host -- for example, Linux kernel
console writes proceed at a glacial pace (less than 100 bytes per
second) because the write path waits for a 10ms timeout to expire
after every character instead of being able to continue on to the next
character upon seeing THRE asserted. (GRUB behaves similarly.)
As a workaround, introduce a new port type for the ASPEED VUART that's
identical to PORT_16550A as it had previously been using, but with
UART_FCR_R_TRIG_00 instead to set the receive FIFO trigger level to
one byte, which (experimentally) seems to avoid the problematic THRE
behavior.
Fixes: 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping")
Tested-by: Konstantin Aladyshev <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Zev Weiss <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_aspeed_vuart.c | 2 +-
drivers/tty/serial/8250/8250_port.c | 8 ++++++++
include/uapi/linux/serial_core.h | 3 +++
3 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 2350fb3bb5e4..c2cecc6f47db 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -487,7 +487,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
port.port.irq = irq_of_parse_and_map(np, 0);
port.port.handle_irq = aspeed_vuart_handle_irq;
port.port.iotype = UPIO_MEM;
- port.port.type = PORT_16550A;
+ port.port.type = PORT_ASPEED_VUART;
port.port.uartclk = clk;
port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index ec88b706e882..b470bc747b99 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -307,6 +307,14 @@ static const struct serial8250_config uart_config[] = {
.rxtrig_bytes = {1, 32, 64, 112},
.flags = UART_CAP_FIFO | UART_CAP_SLEEP,
},
+ [PORT_ASPEED_VUART] = {
+ .name = "ASPEED VUART",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ .rxtrig_bytes = {1, 4, 8, 14},
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c4042dcfdc0c..8885e69178bd 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -68,6 +68,9 @@
/* NVIDIA Tegra Combined UART */
#define PORT_TEGRA_TCU 41
+/* ASPEED AST2x00 virtual UART */
+#define PORT_ASPEED_VUART 42
+
/* Intel EG20 */
#define PORT_PCH_8LINE 44
#define PORT_PCH_2LINE 45
--
2.34.1
From: Vladimir Oltean <[email protected]>
[ Upstream commit 8fd36358ce82382519b50b05f437493e1e00c4a9 ]
DSA probing is atypical because a tree of devices must probe all at
once, so out of N switches which call dsa_tree_setup_routing_table()
during probe, for (N - 1) of them, "complete" will return false and they
will exit probing early. The Nth switch will set up the whole tree on
their behalf.
The implication is that for (N - 1) switches, the driver binds to the
device successfully, without doing anything. When the driver is bound,
the ->shutdown() method may run. But if the Nth switch has failed to
initialize the tree, there is nothing to do for the (N - 1) driver
instances, since the slave devices have not been created, etc. Moreover,
dsa_switch_shutdown() expects that the calling @ds has been in fact
initialized, so it jumps at dereferencing the various data structures,
which is incorrect.
Avoid the ensuing NULL pointer dereferences by simply checking whether
the Nth switch has previously set "ds->setup = true" for the switch
which is currently shutting down. The entire setup is serialized under
dsa2_mutex which we already hold.
Fixes: 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown")
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/dsa/dsa2.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index e7fa8ce41a4c..64a56db3de58 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -1631,6 +1631,10 @@ void dsa_switch_shutdown(struct dsa_switch *ds)
struct dsa_port *dp;
mutex_lock(&dsa2_mutex);
+
+ if (!ds->setup)
+ goto out;
+
rtnl_lock();
list_for_each_entry(dp, &ds->dst->ports, list) {
@@ -1665,6 +1669,7 @@ void dsa_switch_shutdown(struct dsa_switch *ds)
unregister_netdevice_many(&unregister_list);
rtnl_unlock();
+out:
mutex_unlock(&dsa2_mutex);
}
EXPORT_SYMBOL_GPL(dsa_switch_shutdown);
--
2.34.1
From: David Stevens <[email protected]>
commit 2e727bffbe93750a13d2414f3ce43de2f21600d2 upstream.
Introduce a new dev_use_swiotlb function to guard swiotlb code, instead
of overloading dev_is_untrusted. This allows CONFIG_SWIOTLB to be
checked more broadly, so the swiotlb related code can be removed more
aggressively.
Signed-off-by: David Stevens <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Cc: Mario Limonciello <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/dma-iommu.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -317,6 +317,11 @@ static bool dev_is_untrusted(struct devi
return dev_is_pci(dev) && to_pci_dev(dev)->untrusted;
}
+static bool dev_use_swiotlb(struct device *dev)
+{
+ return IS_ENABLED(CONFIG_SWIOTLB) && dev_is_untrusted(dev);
+}
+
/* sysfs updates are serialised by the mutex of the group owning @domain */
int iommu_dma_init_fq(struct iommu_domain *domain)
{
@@ -731,7 +736,7 @@ static void iommu_dma_sync_single_for_cp
{
phys_addr_t phys;
- if (dev_is_dma_coherent(dev) && !dev_is_untrusted(dev))
+ if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
return;
phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
@@ -747,7 +752,7 @@ static void iommu_dma_sync_single_for_de
{
phys_addr_t phys;
- if (dev_is_dma_coherent(dev) && !dev_is_untrusted(dev))
+ if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
return;
phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
@@ -765,7 +770,7 @@ static void iommu_dma_sync_sg_for_cpu(st
struct scatterlist *sg;
int i;
- if (dev_is_untrusted(dev))
+ if (dev_use_swiotlb(dev))
for_each_sg(sgl, sg, nelems, i)
iommu_dma_sync_single_for_cpu(dev, sg_dma_address(sg),
sg->length, dir);
@@ -781,7 +786,7 @@ static void iommu_dma_sync_sg_for_device
struct scatterlist *sg;
int i;
- if (dev_is_untrusted(dev))
+ if (dev_use_swiotlb(dev))
for_each_sg(sgl, sg, nelems, i)
iommu_dma_sync_single_for_device(dev,
sg_dma_address(sg),
@@ -808,8 +813,7 @@ static dma_addr_t iommu_dma_map_page(str
* If both the physical buffer start address and size are
* page aligned, we don't need to use a bounce page.
*/
- if (IS_ENABLED(CONFIG_SWIOTLB) && dev_is_untrusted(dev) &&
- iova_offset(iovad, phys | size)) {
+ if (dev_use_swiotlb(dev) && iova_offset(iovad, phys | size)) {
void *padding_start;
size_t padding_size;
@@ -995,7 +999,7 @@ static int iommu_dma_map_sg(struct devic
goto out;
}
- if (dev_is_untrusted(dev))
+ if (dev_use_swiotlb(dev))
return iommu_dma_map_sg_swiotlb(dev, sg, nents, dir, attrs);
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
@@ -1073,7 +1077,7 @@ static void iommu_dma_unmap_sg(struct de
struct scatterlist *tmp;
int i;
- if (dev_is_untrusted(dev)) {
+ if (dev_use_swiotlb(dev)) {
iommu_dma_unmap_sg_swiotlb(dev, sg, nents, dir, attrs);
return;
}
From: Kumar Kartikeya Dwivedi <[email protected]>
[ Upstream commit 18688de203b47e5d8d9d0953385bf30b5949324f ]
While working on code to populate kfunc BTF ID sets for module BTF from
its initcall, I noticed that by the time the initcall is invoked, the
module BTF can already be seen by userspace (and the BPF verifier). The
existing btf_try_get_module calls try_module_get which only fails if
mod->state == MODULE_STATE_GOING, i.e. it can increment module reference
when module initcall is happening in parallel.
Currently, BTF parsing happens from MODULE_STATE_COMING notifier
callback. At this point, the module initcalls have not been invoked.
The notifier callback parses and prepares the module BTF, allocates an
ID, which publishes it to userspace, and then adds it to the btf_modules
list allowing the kernel to invoke btf_try_get_module for the BTF.
However, at this point, the module has not been fully initialized (i.e.
its initcalls have not finished). The code in module.c can still fail
and free the module, without caring for other users. However, nothing
stops btf_try_get_module from succeeding between the state transition
from MODULE_STATE_COMING to MODULE_STATE_LIVE.
This leads to a use-after-free issue when BPF program loads
successfully in the state transition, load_module's do_init_module call
fails and frees the module, and BPF program fd on close calls module_put
for the freed module. Future patch has test case to verify we don't
regress in this area in future.
There are multiple points after prepare_coming_module (in load_module)
where failure can occur and module loading can return error. We
illustrate and test for the race using the last point where it can
practically occur (in module __init function).
An illustration of the race:
CPU 0 CPU 1
load_module
notifier_call(MODULE_STATE_COMING)
btf_parse_module
btf_alloc_id // Published to userspace
list_add(&btf_mod->list, btf_modules)
mod->init(...)
... ^
bpf_check |
check_pseudo_btf_id |
btf_try_get_module |
returns true | ...
... | module __init in progress
return prog_fd | ...
... V
if (ret < 0)
free_module(mod)
...
close(prog_fd)
...
bpf_prog_free_deferred
module_put(used_btf.mod) // use-after-free
We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier
callback when MODULE_STATE_LIVE state is reached for the module, so that
we return NULL from btf_try_get_module for modules that are not fully
formed. Since try_module_get already checks that module is not in
MODULE_STATE_GOING state, and that is the only transition a live module
can make before being removed from btf_modules list, this is enough to
close the race and prevent the bug.
A later selftest patch crafts the race condition artifically to verify
that it has been fixed, and that verifier fails to load program (with
ENXIO).
Lastly, a couple of comments:
1. Even if this race didn't exist, it seems more appropriate to only
access resources (ksyms and kfuncs) of a fully formed module which
has been initialized completely.
2. This patch was born out of need for synchronization against module
initcall for the next patch, so it is needed for correctness even
without the aforementioned race condition. The BTF resources
initialized by module initcall are set up once and then only looked
up, so just waiting until the initcall has finished ensures correct
behavior.
Fixes: 541c3bad8dc5 ("bpf: Support BPF ksym variables in kernel modules")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/btf.c | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index b8ed4da63bc8..09406b0e215e 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -6006,12 +6006,17 @@ bool btf_id_set_contains(const struct btf_id_set *set, u32 id)
return bsearch(&id, set->ids, set->cnt, sizeof(u32), btf_id_cmp_func) != NULL;
}
+enum {
+ BTF_MODULE_F_LIVE = (1 << 0),
+};
+
#ifdef CONFIG_DEBUG_INFO_BTF_MODULES
struct btf_module {
struct list_head list;
struct module *module;
struct btf *btf;
struct bin_attribute *sysfs_attr;
+ int flags;
};
static LIST_HEAD(btf_modules);
@@ -6037,7 +6042,8 @@ static int btf_module_notify(struct notifier_block *nb, unsigned long op,
int err = 0;
if (mod->btf_data_size == 0 ||
- (op != MODULE_STATE_COMING && op != MODULE_STATE_GOING))
+ (op != MODULE_STATE_COMING && op != MODULE_STATE_LIVE &&
+ op != MODULE_STATE_GOING))
goto out;
switch (op) {
@@ -6094,6 +6100,17 @@ static int btf_module_notify(struct notifier_block *nb, unsigned long op,
btf_mod->sysfs_attr = attr;
}
+ break;
+ case MODULE_STATE_LIVE:
+ mutex_lock(&btf_module_mutex);
+ list_for_each_entry_safe(btf_mod, tmp, &btf_modules, list) {
+ if (btf_mod->module != module)
+ continue;
+
+ btf_mod->flags |= BTF_MODULE_F_LIVE;
+ break;
+ }
+ mutex_unlock(&btf_module_mutex);
break;
case MODULE_STATE_GOING:
mutex_lock(&btf_module_mutex);
@@ -6140,7 +6157,12 @@ struct module *btf_try_get_module(const struct btf *btf)
if (btf_mod->btf != btf)
continue;
- if (try_module_get(btf_mod->module))
+ /* We must only consider module whose __init routine has
+ * finished, hence we must check for BTF_MODULE_F_LIVE flag,
+ * which is set from the notifier callback for
+ * MODULE_STATE_LIVE.
+ */
+ if ((btf_mod->flags & BTF_MODULE_F_LIVE) && try_module_get(btf_mod->module))
res = btf_mod->module;
break;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 6d6ef58c2470da85a99119f74d34216c8074b9f0 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/tegra/clk-tegra124-emc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/tegra/clk-tegra124-emc.c b/drivers/clk/tegra/clk-tegra124-emc.c
index 74c1d894cca8..219c80653dbd 100644
--- a/drivers/clk/tegra/clk-tegra124-emc.c
+++ b/drivers/clk/tegra/clk-tegra124-emc.c
@@ -198,6 +198,7 @@ static struct tegra_emc *emc_ensure_emc_driver(struct tegra_clk_emc *tegra)
tegra->emc = platform_get_drvdata(pdev);
if (!tegra->emc) {
+ put_device(&pdev->dev);
pr_err("%s: cannot find EMC driver\n", __func__);
return NULL;
}
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit b205f5850263632b6897d8f0bfaeeea4955f8663 ]
Some resource should be released if an error occurs in
'bcm2835_i2c_probe()'.
Add an error handling path and the needed 'clk_disable_unprepare()' and
'clk_rate_exclusive_put()' calls.
While at it, rework the bottom of the function to use this newly added
error handling path and have an explicit and more standard "return 0;" at
the end of the normal path.
Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF")
Signed-off-by: Christophe JAILLET <[email protected]>
[wsa: rebased]
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 5149454eef4a..f72c6576d8a3 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -454,18 +454,20 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
ret = clk_prepare_enable(i2c_dev->bus_clk);
if (ret) {
dev_err(&pdev->dev, "Couldn't prepare clock");
- return ret;
+ goto err_put_exclusive_rate;
}
i2c_dev->irq = platform_get_irq(pdev, 0);
- if (i2c_dev->irq < 0)
- return i2c_dev->irq;
+ if (i2c_dev->irq < 0) {
+ ret = i2c_dev->irq;
+ goto err_disable_unprepare_clk;
+ }
ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED,
dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Could not request IRQ\n");
- return -ENODEV;
+ goto err_disable_unprepare_clk;
}
adap = &i2c_dev->adapter;
@@ -489,7 +491,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(adap);
if (ret)
- free_irq(i2c_dev->irq, i2c_dev);
+ goto err_free_irq;
+
+ return 0;
+
+err_free_irq:
+ free_irq(i2c_dev->irq, i2c_dev);
+err_disable_unprepare_clk:
+ clk_disable_unprepare(i2c_dev->bus_clk);
+err_put_exclusive_rate:
+ clk_rate_exclusive_put(i2c_dev->bus_clk);
return ret;
}
--
2.34.1
From: Robin Gong <[email protected]>
[ Upstream commit 8219efd08a0aa1d7944bdb66d84ba57549258968 ]
check 'priv->clk' before 'imx_mu_read()' otherwise crash happens on
i.mx8ulp, since clock not enabled.
Fixes: 4f0b776ef5831 ("mailbox: imx-mailbox: support i.MX8ULP MU")
Reviewed-by: Jacky Bai <[email protected]>
Signed-off-by: Robin Gong <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mailbox/imx-mailbox.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
index 0ce75c6b36b6..2aeef0bc6930 100644
--- a/drivers/mailbox/imx-mailbox.c
+++ b/drivers/mailbox/imx-mailbox.c
@@ -668,7 +668,7 @@ static int __maybe_unused imx_mu_resume_noirq(struct device *dev)
* send failed, may lead to system freeze. This issue
* is observed by testing freeze mode suspend.
*/
- if (!imx_mu_read(priv, priv->dcfg->xCR[0]) && !priv->clk) {
+ if (!priv->clk && !imx_mu_read(priv, priv->dcfg->xCR[0])) {
for (i = 0; i < IMX_MU_xCR_MAX; i++)
imx_mu_write(priv, priv->xcr[i], priv->dcfg->xCR[i]);
}
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
commit 603501c16431c56f74eaef1ee1390f60a30c2187 upstream.
The name "DS" is defined in arch/x86/um/shared/sysdep/ptrace_64.h,
which results in a compiler warning when build-testing on ARCH=um.
Rename this driver's "DS" macro to DSTR so avoid this collision.
Reported-by: kernel test robot <[email protected]>
Fixes: 3b588e43ee5c7 ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 156 +++++++++++++++---------------
1 file changed, 78 insertions(+), 78 deletions(-)
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
@@ -904,7 +904,7 @@ static struct npcm7xx_func npcm7xx_funcs
#define DRIVE_STRENGTH_HI_SHIFT 12
#define DRIVE_STRENGTH_MASK 0x0000FF00
-#define DS(lo, hi) (((lo) << DRIVE_STRENGTH_LO_SHIFT) | \
+#define DSTR(lo, hi) (((lo) << DRIVE_STRENGTH_LO_SHIFT) | \
((hi) << DRIVE_STRENGTH_HI_SHIFT))
#define DSLO(x) (((x) >> DRIVE_STRENGTH_LO_SHIFT) & 0xF)
#define DSHI(x) (((x) >> DRIVE_STRENGTH_HI_SHIFT) & 0xF)
@@ -924,31 +924,31 @@ struct npcm7xx_pincfg {
static const struct npcm7xx_pincfg pincfg[] = {
/* PIN FUNCTION 1 FUNCTION 2 FUNCTION 3 FLAGS */
NPCM7XX_PINCFG(0, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(1, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(2, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(1, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(2, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(3, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(4, iox2, MFSEL3, 14, smb1d, I2CSEGSEL, 7, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(5, iox2, MFSEL3, 14, smb1d, I2CSEGSEL, 7, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(6, iox2, MFSEL3, 14, smb2d, I2CSEGSEL, 10, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(7, iox2, MFSEL3, 14, smb2d, I2CSEGSEL, 10, none, NONE, 0, SLEW),
- NPCM7XX_PINCFG(8, lkgpo1, FLOCKR1, 4, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(9, lkgpo2, FLOCKR1, 8, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(10, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(11, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(8, lkgpo1, FLOCKR1, 4, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(9, lkgpo2, FLOCKR1, 8, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(10, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(11, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(12, gspi, MFSEL1, 24, smb5b, I2CSEGSEL, 19, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(13, gspi, MFSEL1, 24, smb5b, I2CSEGSEL, 19, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(14, gspi, MFSEL1, 24, smb5c, I2CSEGSEL, 20, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(15, gspi, MFSEL1, 24, smb5c, I2CSEGSEL, 20, none, NONE, 0, SLEW),
- NPCM7XX_PINCFG(16, lkgpo0, FLOCKR1, 0, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(17, pspi2, MFSEL3, 13, smb4den, I2CSEGSEL, 23, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(18, pspi2, MFSEL3, 13, smb4b, I2CSEGSEL, 14, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(19, pspi2, MFSEL3, 13, smb4b, I2CSEGSEL, 14, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(16, lkgpo0, FLOCKR1, 0, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(17, pspi2, MFSEL3, 13, smb4den, I2CSEGSEL, 23, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(18, pspi2, MFSEL3, 13, smb4b, I2CSEGSEL, 14, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(19, pspi2, MFSEL3, 13, smb4b, I2CSEGSEL, 14, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(20, smb4c, I2CSEGSEL, 15, smb15, MFSEL3, 8, none, NONE, 0, 0),
NPCM7XX_PINCFG(21, smb4c, I2CSEGSEL, 15, smb15, MFSEL3, 8, none, NONE, 0, 0),
NPCM7XX_PINCFG(22, smb4d, I2CSEGSEL, 16, smb14, MFSEL3, 7, none, NONE, 0, 0),
NPCM7XX_PINCFG(23, smb4d, I2CSEGSEL, 16, smb14, MFSEL3, 7, none, NONE, 0, 0),
- NPCM7XX_PINCFG(24, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(25, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(24, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(25, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(26, smb5, MFSEL1, 2, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(27, smb5, MFSEL1, 2, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(28, smb4, MFSEL1, 1, none, NONE, 0, none, NONE, 0, 0),
@@ -964,12 +964,12 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(39, smb3b, I2CSEGSEL, 11, none, NONE, 0, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(40, smb3b, I2CSEGSEL, 11, none, NONE, 0, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(41, bmcuart0a, MFSEL1, 9, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(42, bmcuart0a, MFSEL1, 9, none, NONE, 0, none, NONE, 0, DS(2, 4) | GPO),
+ NPCM7XX_PINCFG(42, bmcuart0a, MFSEL1, 9, none, NONE, 0, none, NONE, 0, DSTR(2, 4) | GPO),
NPCM7XX_PINCFG(43, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, bmcuart1, MFSEL3, 24, 0),
NPCM7XX_PINCFG(44, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, bmcuart1, MFSEL3, 24, 0),
NPCM7XX_PINCFG(45, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(46, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, DS(2, 8)),
- NPCM7XX_PINCFG(47, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, DS(2, 8)),
+ NPCM7XX_PINCFG(46, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, DSTR(2, 8)),
+ NPCM7XX_PINCFG(47, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, DSTR(2, 8)),
NPCM7XX_PINCFG(48, uart2, MFSEL1, 11, bmcuart0b, MFSEL4, 1, none, NONE, 0, GPO),
NPCM7XX_PINCFG(49, uart2, MFSEL1, 11, bmcuart0b, MFSEL4, 1, none, NONE, 0, 0),
NPCM7XX_PINCFG(50, uart2, MFSEL1, 11, none, NONE, 0, none, NONE, 0, 0),
@@ -979,8 +979,8 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(54, uart2, MFSEL1, 11, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(55, uart2, MFSEL1, 11, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(56, r1err, MFSEL1, 12, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(57, r1md, MFSEL1, 13, none, NONE, 0, none, NONE, 0, DS(2, 4)),
- NPCM7XX_PINCFG(58, r1md, MFSEL1, 13, none, NONE, 0, none, NONE, 0, DS(2, 4)),
+ NPCM7XX_PINCFG(57, r1md, MFSEL1, 13, none, NONE, 0, none, NONE, 0, DSTR(2, 4)),
+ NPCM7XX_PINCFG(58, r1md, MFSEL1, 13, none, NONE, 0, none, NONE, 0, DSTR(2, 4)),
NPCM7XX_PINCFG(59, smb3d, I2CSEGSEL, 13, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(60, smb3d, I2CSEGSEL, 13, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(61, uart1, MFSEL1, 10, none, NONE, 0, none, NONE, 0, GPO),
@@ -1003,19 +1003,19 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(77, fanin13, MFSEL2, 13, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(78, fanin14, MFSEL2, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(79, fanin15, MFSEL2, 15, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(80, pwm0, MFSEL2, 16, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(81, pwm1, MFSEL2, 17, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(82, pwm2, MFSEL2, 18, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(83, pwm3, MFSEL2, 19, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(84, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(85, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(86, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(80, pwm0, MFSEL2, 16, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(81, pwm1, MFSEL2, 17, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(82, pwm2, MFSEL2, 18, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(83, pwm3, MFSEL2, 19, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(84, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(85, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(86, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(87, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(88, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(89, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(90, r2err, MFSEL1, 15, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(91, r2md, MFSEL1, 16, none, NONE, 0, none, NONE, 0, DS(2, 4)),
- NPCM7XX_PINCFG(92, r2md, MFSEL1, 16, none, NONE, 0, none, NONE, 0, DS(2, 4)),
+ NPCM7XX_PINCFG(91, r2md, MFSEL1, 16, none, NONE, 0, none, NONE, 0, DSTR(2, 4)),
+ NPCM7XX_PINCFG(92, r2md, MFSEL1, 16, none, NONE, 0, none, NONE, 0, DSTR(2, 4)),
NPCM7XX_PINCFG(93, ga20kbc, MFSEL1, 17, smb5d, I2CSEGSEL, 21, none, NONE, 0, 0),
NPCM7XX_PINCFG(94, ga20kbc, MFSEL1, 17, smb5d, I2CSEGSEL, 21, none, NONE, 0, 0),
NPCM7XX_PINCFG(95, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, 0),
@@ -1061,34 +1061,34 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(133, smb10, MFSEL4, 13, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(134, smb11, MFSEL4, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(135, smb11, MFSEL4, 14, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(136, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(137, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(138, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(139, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(140, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(136, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(137, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(138, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(139, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(140, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(141, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(142, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(142, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(143, sd1, MFSEL3, 12, sd1pwr, MFSEL4, 5, none, NONE, 0, 0),
- NPCM7XX_PINCFG(144, pwm4, MFSEL2, 20, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(145, pwm5, MFSEL2, 21, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(146, pwm6, MFSEL2, 22, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(147, pwm7, MFSEL2, 23, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(148, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(149, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(150, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(151, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(152, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(144, pwm4, MFSEL2, 20, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(145, pwm5, MFSEL2, 21, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(146, pwm6, MFSEL2, 22, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(147, pwm7, MFSEL2, 23, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(148, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(149, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(150, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(151, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(152, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(153, mmcwp, FLOCKR1, 24, none, NONE, 0, none, NONE, 0, 0), /* Z1/A1 */
- NPCM7XX_PINCFG(154, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(154, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(155, mmccd, MFSEL3, 25, mmcrst, MFSEL4, 6, none, NONE, 0, 0), /* Z1/A1 */
- NPCM7XX_PINCFG(156, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(157, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(158, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(159, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
-
- NPCM7XX_PINCFG(160, clkout, MFSEL1, 21, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(161, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, DS(8, 12)),
- NPCM7XX_PINCFG(162, serirq, NONE, 0, gpio, MFSEL1, 31, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(156, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(157, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(158, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(159, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+
+ NPCM7XX_PINCFG(160, clkout, MFSEL1, 21, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(161, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, DSTR(8, 12)),
+ NPCM7XX_PINCFG(162, serirq, NONE, 0, gpio, MFSEL1, 31, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(163, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, 0),
NPCM7XX_PINCFG(164, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, SLEWLPC),
NPCM7XX_PINCFG(165, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, SLEWLPC),
@@ -1101,25 +1101,25 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(172, smb6, MFSEL3, 1, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(173, smb7, MFSEL3, 2, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(174, smb7, MFSEL3, 2, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(175, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(176, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(177, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(178, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(179, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(180, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(175, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(176, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(177, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(178, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(179, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(180, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(181, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(182, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(183, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(184, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW | GPO),
- NPCM7XX_PINCFG(185, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW | GPO),
- NPCM7XX_PINCFG(186, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(187, spi3cs1, MFSEL4, 17, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(188, spi3quad, MFSEL4, 20, spi3cs2, MFSEL4, 18, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(189, spi3quad, MFSEL4, 20, spi3cs3, MFSEL4, 19, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(190, gpio, FLOCKR1, 20, nprd_smi, NONE, 0, none, NONE, 0, DS(2, 4)),
- NPCM7XX_PINCFG(191, none, NONE, 0, none, NONE, 0, none, NONE, 0, DS(8, 12)), /* XX */
+ NPCM7XX_PINCFG(183, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(184, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW | GPO),
+ NPCM7XX_PINCFG(185, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW | GPO),
+ NPCM7XX_PINCFG(186, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(187, spi3cs1, MFSEL4, 17, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(188, spi3quad, MFSEL4, 20, spi3cs2, MFSEL4, 18, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(189, spi3quad, MFSEL4, 20, spi3cs3, MFSEL4, 19, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(190, gpio, FLOCKR1, 20, nprd_smi, NONE, 0, none, NONE, 0, DSTR(2, 4)),
+ NPCM7XX_PINCFG(191, none, NONE, 0, none, NONE, 0, none, NONE, 0, DSTR(8, 12)), /* XX */
- NPCM7XX_PINCFG(192, none, NONE, 0, none, NONE, 0, none, NONE, 0, DS(8, 12)), /* XX */
+ NPCM7XX_PINCFG(192, none, NONE, 0, none, NONE, 0, none, NONE, 0, DSTR(8, 12)), /* XX */
NPCM7XX_PINCFG(193, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(194, smb0b, I2CSEGSEL, 0, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(195, smb0b, I2CSEGSEL, 0, none, NONE, 0, none, NONE, 0, 0),
@@ -1130,11 +1130,11 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(200, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(201, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(202, smb0c, I2CSEGSEL, 1, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(203, faninx, MFSEL3, 3, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(203, faninx, MFSEL3, 3, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(204, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(205, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, SLEW),
- NPCM7XX_PINCFG(206, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(207, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, DS(4, 8)),
+ NPCM7XX_PINCFG(206, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(207, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, DSTR(4, 8)),
NPCM7XX_PINCFG(208, rg2, MFSEL4, 24, ddr, MFSEL3, 26, none, NONE, 0, 0),
NPCM7XX_PINCFG(209, rg2, MFSEL4, 24, ddr, MFSEL3, 26, none, NONE, 0, 0),
NPCM7XX_PINCFG(210, rg2, MFSEL4, 24, ddr, MFSEL3, 26, none, NONE, 0, 0),
@@ -1146,20 +1146,20 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(216, rg2mdio, MFSEL4, 23, ddr, MFSEL3, 26, none, NONE, 0, 0),
NPCM7XX_PINCFG(217, rg2mdio, MFSEL4, 23, ddr, MFSEL3, 26, none, NONE, 0, 0),
NPCM7XX_PINCFG(218, wdog1, MFSEL3, 19, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(219, wdog2, MFSEL3, 20, none, NONE, 0, none, NONE, 0, DS(4, 8)),
+ NPCM7XX_PINCFG(219, wdog2, MFSEL3, 20, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
NPCM7XX_PINCFG(220, smb12, MFSEL3, 5, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(221, smb12, MFSEL3, 5, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(222, smb13, MFSEL3, 6, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(223, smb13, MFSEL3, 6, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(224, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, SLEW),
- NPCM7XX_PINCFG(225, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW | GPO),
- NPCM7XX_PINCFG(226, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW | GPO),
- NPCM7XX_PINCFG(227, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(228, spixcs1, MFSEL4, 28, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(229, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(230, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(231, clkreq, MFSEL4, 9, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(225, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW | GPO),
+ NPCM7XX_PINCFG(226, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW | GPO),
+ NPCM7XX_PINCFG(227, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(228, spixcs1, MFSEL4, 28, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(229, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(230, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(231, clkreq, MFSEL4, 9, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(253, none, NONE, 0, none, NONE, 0, none, NONE, 0, GPI), /* SDHC1 power */
NPCM7XX_PINCFG(254, none, NONE, 0, none, NONE, 0, none, NONE, 0, GPI), /* SDHC2 power */
NPCM7XX_PINCFG(255, none, NONE, 0, none, NONE, 0, none, NONE, 0, GPI), /* DACOSEL */
From: Wang Yufen <[email protected]>
[ Upstream commit 2486ab434b2c2a14e9237296db00b1e1b7ae3273 ]
If tcp_bpf_sendmsg is running during a tear down operation, psock may be
freed.
tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
sk_msg_return()
tcp_bpf_sendmsg_redir()
unlikely(!psock))
sk_msg_free()
The mem of msg has been uncharged in tcp_bpf_send_verdict() by
sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock
is null, we can simply returning an error code, this would then trigger
the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have
the side effect of throwing an error up to user space. This would be a
slight change in behavior from user side but would look the same as an
error if the redirect on the socket threw an error.
This issue can cause the following info:
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_bpf.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 304800c60427..1cdcb4df0eb7 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -138,10 +138,9 @@ int tcp_bpf_sendmsg_redir(struct sock *sk, struct sk_msg *msg,
struct sk_psock *psock = sk_psock_get(sk);
int ret;
- if (unlikely(!psock)) {
- sk_msg_free(sk, msg);
- return 0;
- }
+ if (unlikely(!psock))
+ return -EPIPE;
+
ret = ingress ? bpf_tcp_ingress(sk, psock, msg, bytes, flags) :
tcp_bpf_push_locked(sk, msg, bytes, flags, false);
sk_psock_put(sk, psock);
--
2.34.1
From: Phillip Potter <[email protected]>
[ Upstream commit 5ec394d58bdba731c2a33645be7018e71f72f287 ]
Convert DBG_88E_LEVEL macro call in hal/rtl8188e_hal_init.c to plain
dev_dbg call, as although the information is potentially useful, we should
be exposing it using standard kernel debugging functionality.
Signed-off-by: Phillip Potter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/r8188eu/hal/rtl8188e_hal_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index 14758361960c..a677b2049ef3 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -573,7 +573,7 @@ static int load_firmware(struct rt_firmware *pFirmware, struct device *device)
memcpy(pFirmware->szFwBuffer, fw->data, fw->size);
pFirmware->ulFwLength = fw->size;
release_firmware(fw);
- DBG_88E_LEVEL(_drv_info_, "+%s: !bUsedWoWLANFw, FmrmwareLen:%d+\n", __func__, pFirmware->ulFwLength);
+ dev_dbg(device, "!bUsedWoWLANFw, FmrmwareLen:%d+\n", pFirmware->ulFwLength);
Exit:
return rtStatus;
--
2.34.1
From: Miquel Raynal <[email protected]>
commit 93f2ec9e401276fb4ea9903194a5bfcf175f9a2c upstream.
The reg property of a NAND device always references the chip-selects.
The ready/busy lines are described in the nand-rb property. I believe
this was a harmless copy/paste error during the conversion to yaml.
Fixes: 212e49693592 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options")
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -55,7 +55,7 @@ patternProperties:
properties:
reg:
description:
- Contains the native Ready/Busy IDs.
+ Contains the chip-select IDs.
nand-ecc-engine:
allOf:
From: Hangbin Liu <[email protected]>
[ Upstream commit ec80906b0fbd7be11e3e960813b977b1ffe5f8fe ]
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes: 6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/test_lirc_mode2.sh | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_lirc_mode2.sh b/tools/testing/selftests/bpf/test_lirc_mode2.sh
index ec4e15948e40..5252b91f48a1 100755
--- a/tools/testing/selftests/bpf/test_lirc_mode2.sh
+++ b/tools/testing/selftests/bpf/test_lirc_mode2.sh
@@ -3,6 +3,7 @@
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
+ret=$ksft_skip
msg="skip all tests:"
if [ $UID != 0 ]; then
@@ -25,7 +26,7 @@ do
fi
done
-if [ -n $LIRCDEV ];
+if [ -n "$LIRCDEV" ];
then
TYPE=lirc_mode2
./test_lirc_mode2_user $LIRCDEV $INPUTDEV
@@ -36,3 +37,5 @@ then
echo -e ${GREEN}"PASS: $TYPE"${NC}
fi
fi
+
+exit $ret
--
2.34.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit cc587b7c8fbbe128f6bd0dad025a0caea5e6d164 ]
Accessing enums using integer would result in array out of bounds access
on platforms like aarch64 where sizeof(long) is 8 compared to enum size
which is 4 bytes.
Fix this by using enumerated items instead of integers.
Fixes: e8ba1e05bdc0 ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wcd938x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
index bbc261ab2025..54671bbf7471 100644
--- a/sound/soc/codecs/wcd938x.c
+++ b/sound/soc/codecs/wcd938x.c
@@ -2504,7 +2504,7 @@ static int wcd938x_tx_mode_get(struct snd_kcontrol *kcontrol,
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
int path = e->shift_l;
- ucontrol->value.integer.value[0] = wcd938x->tx_mode[path];
+ ucontrol->value.enumerated.item[0] = wcd938x->tx_mode[path];
return 0;
}
@@ -2528,7 +2528,7 @@ static int wcd938x_rx_hph_mode_get(struct snd_kcontrol *kcontrol,
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
- ucontrol->value.integer.value[0] = wcd938x->hph_mode;
+ ucontrol->value.enumerated.item[0] = wcd938x->hph_mode;
return 0;
}
--
2.34.1
From: Robin Gong <[email protected]>
commit 892cb524ae8a27bf5e42f711318371acd9a9f74a upstream.
Since IRQF_NO_SUSPEND used for imx mailbox driver, that means this irq
can't be used for wakeup source so that can't wakeup from freeze mode.
Add pm_system_wakeup() to wakeup from freeze mode.
Fixes: b7b2796b9b31e("mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag")
Reviewed-by: Jacky Bai <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Robin Gong <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mailbox/imx-mailbox.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/mailbox/imx-mailbox.c
+++ b/drivers/mailbox/imx-mailbox.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
+#include <linux/suspend.h>
#include <linux/slab.h>
#define IMX_MU_CHANS 16
@@ -67,6 +68,7 @@ struct imx_mu_priv {
const struct imx_mu_dcfg *dcfg;
struct clk *clk;
int irq;
+ bool suspend;
u32 xcr[4];
@@ -307,6 +309,9 @@ static irqreturn_t imx_mu_isr(int irq, v
return IRQ_NONE;
}
+ if (priv->suspend)
+ pm_system_wakeup();
+
return IRQ_HANDLED;
}
@@ -652,6 +657,8 @@ static int __maybe_unused imx_mu_suspend
priv->xcr[i] = imx_mu_read(priv, priv->dcfg->xCR[i]);
}
+ priv->suspend = true;
+
return 0;
}
@@ -673,6 +680,8 @@ static int __maybe_unused imx_mu_resume_
imx_mu_write(priv, priv->xcr[i], priv->dcfg->xCR[i]);
}
+ priv->suspend = false;
+
return 0;
}
From: Zhang Wensheng <[email protected]>
[ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ]
KASAN reports a use-after-free report when doing normal scsi-mq test
[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541] dump_stack+0x9b/0xce
[69832.251232] ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243] print_address_description.constprop.6+0x3e/0x60
[69832.253381] ? __cpuidle_text_end+0x5/0x5
[69832.254211] ? vprintk_func+0x6b/0x120
[69832.254994] ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952] ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914] kasan_report.cold.9+0x22/0x3a
[69832.257753] ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755] check_memory_region+0x1c1/0x1e0
[69832.260248] bfq_dispatch_request+0x1045/0x44b0
[69832.261181] ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147] ? __switch_to+0x5f4/0xee0
[69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946] __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840] blk_mq_run_work_fn+0x51/0x60
[69832.278170] process_one_work+0x6d4/0xfe0
[69832.278984] worker_thread+0x91/0xc80
[69832.279726] ? __kthread_parkme+0xb0/0x110
[69832.280554] ? process_one_work+0xfe0/0xfe0
[69832.281414] kthread+0x32d/0x3f0
[69832.282082] ? kthread_park+0x170/0x170
[69832.282849] ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599] kasan_save_stack+0x19/0x40
[69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350] kmem_cache_alloc_node+0x13f/0x460
[69832.287237] bfq_get_queue+0x3d4/0x1140
[69832.287993] bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015] bfq_init_rq+0x337/0x2d50
[69832.289749] bfq_insert_requests+0x304/0x4e10
[69832.290634] blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629] blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538] blk_flush_plug_list+0x2c5/0x480
[69832.293392] io_schedule_prepare+0xb2/0xd0
[69832.294209] io_schedule_timeout+0x13/0x80
[69832.295014] wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137] submit_bio_wait+0x103/0x1a0
[69832.296932] blkdev_issue_discard+0xe6/0x160
[69832.297794] blk_ioctl_discard+0x219/0x290
[69832.298614] blkdev_common_ioctl+0x50a/0x1750
[69832.304715] blkdev_ioctl+0x470/0x600
[69832.305474] block_ioctl+0xde/0x120
[69832.306232] vfs_ioctl+0x6c/0xc0
[69832.306877] __se_sys_ioctl+0x90/0xa0
[69832.307629] do_syscall_64+0x2d/0x40
[69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328] kasan_save_stack+0x19/0x40
[69832.311121] kasan_set_track+0x1c/0x30
[69832.311868] kasan_set_free_info+0x1b/0x30
[69832.312699] __kasan_slab_free+0x111/0x160
[69832.313524] kmem_cache_free+0x94/0x460
[69832.314367] bfq_put_queue+0x582/0x940
[69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275] bfq_bfqq_expire+0xb27/0x2440
[69832.318084] bfq_dispatch_request+0x697/0x44b0
[69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225] __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114] blk_mq_run_work_fn+0x51/0x60
[69832.323942] process_one_work+0x6d4/0xfe0
[69832.324772] worker_thread+0x91/0xc80
[69832.325518] kthread+0x32d/0x3f0
[69832.326205] ret_from_fork+0x1f/0x30
[69832.326932]
[69832.338297] The buggy address belongs to the object at ffff88802622b968
[69832.338297] which belongs to the cache bfq_queue of size 512
[69832.340766] The buggy address is located 288 bytes inside of
[69832.340766] 512-byte region [ffff88802622b968, ffff88802622bb68)
[69832.343091] The buggy address belongs to the page:
[69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228
[69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0
[69832.347719] flags: 0x1fffff80010200(slab|head)
[69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840
[69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000
[69832.356547] page dumped because: kasan: bad access detected
[69832.357652]
[69832.357970] Memory state around the buggy address:
[69832.358926] ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.360358] ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.363273] ^
[69832.363975] ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[69832.375960] ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69832.377405] ==================================================================
In bfq_dispatch_requestfunction, it may have function call:
bfq_dispatch_request
__bfq_dispatch_request
bfq_select_queue
bfq_bfqq_expire
__bfq_bfqd_reset_in_service
bfq_put_queue
kmem_cache_free
In this function call, in_serv_queue has beed expired and meet the
conditions to free. In the function bfq_dispatch_request, the address
of in_serv_queue pointing to has been released. For getting the value
of idle_timer_disabled, it will get flags value from the address which
in_serv_queue pointing to, then the problem of use-after-free happens;
Fix the problem by check in_serv_queue == bfqd->in_service_queue, to
get the value of idle_timer_disabled if in_serve_queue is equel to
bfqd->in_service_queue. If the space of in_serv_queue pointing has
been released, this judge will aviod use-after-free problem.
And if in_serv_queue may be expired or finished, the idle_timer_disabled
will be false which would not give effects to bfq_update_dispatch_stats.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhang Wensheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-iosched.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index e66970bf27db..9843085cc2c3 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -5061,7 +5061,7 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
struct bfq_data *bfqd = hctx->queue->elevator->elevator_data;
struct request *rq;
struct bfq_queue *in_serv_queue;
- bool waiting_rq, idle_timer_disabled;
+ bool waiting_rq, idle_timer_disabled = false;
spin_lock_irq(&bfqd->lock);
@@ -5069,14 +5069,15 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
waiting_rq = in_serv_queue && bfq_bfqq_wait_request(in_serv_queue);
rq = __bfq_dispatch_request(hctx);
-
- idle_timer_disabled =
- waiting_rq && !bfq_bfqq_wait_request(in_serv_queue);
+ if (in_serv_queue == bfqd->in_service_queue) {
+ idle_timer_disabled =
+ waiting_rq && !bfq_bfqq_wait_request(in_serv_queue);
+ }
spin_unlock_irq(&bfqd->lock);
-
- bfq_update_dispatch_stats(hctx->queue, rq, in_serv_queue,
- idle_timer_disabled);
+ bfq_update_dispatch_stats(hctx->queue, rq,
+ idle_timer_disabled ? in_serv_queue : NULL,
+ idle_timer_disabled);
return rq;
}
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit de85193cff0d94d030a53656d8fcc41794807bef ]
This driver can use an interrupt or polling in order get the charger's
status.
When using polling, a delayed work is used.
However, the remove() function unconditionally call
cancel_delayed_work_sync(), even if the delayed work is not used and is not
initialized.
In order to fix it, use devm_delayed_work_autocancel() and remove the now
useless remove() function.
Fixes: feb583e37f8a ("power: supply: add sbs-charger driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/sbs-charger.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c
index 6fa65d118ec1..b08f7d0c4181 100644
--- a/drivers/power/supply/sbs-charger.c
+++ b/drivers/power/supply/sbs-charger.c
@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/regmap.h>
#include <linux/bitops.h>
+#include <linux/devm-helpers.h>
#define SBS_CHARGER_REG_SPEC_INFO 0x11
#define SBS_CHARGER_REG_STATUS 0x13
@@ -209,7 +210,12 @@ static int sbs_probe(struct i2c_client *client,
if (ret)
return dev_err_probe(&client->dev, ret, "Failed to request irq\n");
} else {
- INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+ ret = devm_delayed_work_autocancel(&client->dev, &chip->work,
+ sbs_delayed_work);
+ if (ret)
+ return dev_err_probe(&client->dev, ret,
+ "Failed to init work for polling\n");
+
schedule_delayed_work(&chip->work,
msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
}
@@ -220,15 +226,6 @@ static int sbs_probe(struct i2c_client *client,
return 0;
}
-static int sbs_remove(struct i2c_client *client)
-{
- struct sbs_info *chip = i2c_get_clientdata(client);
-
- cancel_delayed_work_sync(&chip->work);
-
- return 0;
-}
-
#ifdef CONFIG_OF
static const struct of_device_id sbs_dt_ids[] = {
{ .compatible = "sbs,sbs-charger" },
@@ -245,7 +242,6 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
static struct i2c_driver sbs_driver = {
.probe = sbs_probe,
- .remove = sbs_remove,
.id_table = sbs_id,
.driver = {
.name = "sbs-charger",
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 2ecf362d220317debf5da376e0390e9f7a3f7b29 ]
As the potential failure of the clk_enable(),
it should be better to check it, like mxs_saif_trigger().
Fixes: d0ba4c014934 ("ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mxs/mxs-saif.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index 6a2d24d48964..879c1221a809 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -455,7 +455,10 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
* basic clock which should be fast enough for the internal
* logic.
*/
- clk_enable(saif->clk);
+ ret = clk_enable(saif->clk);
+ if (ret)
+ return ret;
+
ret = clk_set_rate(saif->clk, 24000000);
clk_disable(saif->clk);
if (ret)
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit b30537a4cedcacf0ade2f33ebb7610178ed1e7d7 ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value and return
error if fails.
Fixes: fa659a40b80b ("iio: adc: twl6030-gpadc: Use devm_* API family")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/twl6030-gpadc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c
index c6416ad795ca..256177b15c51 100644
--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -911,6 +911,8 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
ret = devm_request_threaded_irq(dev, irq, NULL,
twl6030_gpadc_irq_handler,
IRQF_ONESHOT, "twl6030_gpadc", indio_dev);
+ if (ret)
+ return ret;
ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK);
if (ret < 0) {
--
2.34.1
From: Hangyu Hua <[email protected]>
[ Upstream commit 3fd46e551f67f4303c3276a0d6cd20baf2d192c4 ]
mpc8xx_pic_init() should return -ENOMEM instead of 0 when
irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue
executing even if mpc8xx_pic_host is NULL.
Fixes: cc76404feaed ("powerpc/8xx: Fix possible device node reference leak")
Signed-off-by: Hangyu Hua <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/8xx/pic.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/8xx/pic.c b/arch/powerpc/platforms/8xx/pic.c
index f2ba837249d6..04a6abf14c29 100644
--- a/arch/powerpc/platforms/8xx/pic.c
+++ b/arch/powerpc/platforms/8xx/pic.c
@@ -153,6 +153,7 @@ int __init mpc8xx_pic_init(void)
if (mpc8xx_pic_host == NULL) {
printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n");
ret = -ENOMEM;
+ goto out;
}
ret = 0;
--
2.34.1
From: Dave Jiang <[email protected]>
[ Upstream commit 7ed6f1b85fb613e5e44ef3e14d73f2dc96860935 ]
DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers"
in order to make the concept clearer. Deprecate bandwidth token
naming in the driver and convert to read buffers in order to match with
the spec and reduce confusion when reading the spec.
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/163951338932.2988321.6162640806935567317.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/idxd/device.c | 25 +++++++++++----------
drivers/dma/idxd/idxd.h | 12 +++++------
drivers/dma/idxd/init.c | 6 +++---
drivers/dma/idxd/registers.h | 14 ++++++------
drivers/dma/idxd/sysfs.c | 42 ++++++++++++++++++------------------
5 files changed, 49 insertions(+), 50 deletions(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 3cda1c5faf3c..ac671b6c0c36 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -700,9 +700,9 @@ static void idxd_groups_clear_state(struct idxd_device *idxd)
memset(&group->grpcfg, 0, sizeof(group->grpcfg));
group->num_engines = 0;
group->num_wqs = 0;
- group->use_token_limit = false;
- group->tokens_allowed = 0;
- group->tokens_reserved = 0;
+ group->use_rdbuf_limit = false;
+ group->rdbufs_allowed = 0;
+ group->rdbufs_reserved = 0;
group->tc_a = -1;
group->tc_b = -1;
}
@@ -800,10 +800,10 @@ static int idxd_groups_config_write(struct idxd_device *idxd)
int i;
struct device *dev = &idxd->pdev->dev;
- /* Setup bandwidth token limit */
- if (idxd->hw.gen_cap.config_en && idxd->token_limit) {
+ /* Setup bandwidth rdbuf limit */
+ if (idxd->hw.gen_cap.config_en && idxd->rdbuf_limit) {
reg.bits = ioread32(idxd->reg_base + IDXD_GENCFG_OFFSET);
- reg.token_limit = idxd->token_limit;
+ reg.rdbuf_limit = idxd->rdbuf_limit;
iowrite32(reg.bits, idxd->reg_base + IDXD_GENCFG_OFFSET);
}
@@ -944,13 +944,12 @@ static void idxd_group_flags_setup(struct idxd_device *idxd)
group->tc_b = group->grpcfg.flags.tc_b = 1;
else
group->grpcfg.flags.tc_b = group->tc_b;
- group->grpcfg.flags.use_token_limit = group->use_token_limit;
- group->grpcfg.flags.tokens_reserved = group->tokens_reserved;
- if (group->tokens_allowed)
- group->grpcfg.flags.tokens_allowed =
- group->tokens_allowed;
+ group->grpcfg.flags.use_rdbuf_limit = group->use_rdbuf_limit;
+ group->grpcfg.flags.rdbufs_reserved = group->rdbufs_reserved;
+ if (group->rdbufs_allowed)
+ group->grpcfg.flags.rdbufs_allowed = group->rdbufs_allowed;
else
- group->grpcfg.flags.tokens_allowed = idxd->max_tokens;
+ group->grpcfg.flags.rdbufs_allowed = idxd->max_rdbufs;
}
}
@@ -1145,7 +1144,7 @@ int idxd_device_load_config(struct idxd_device *idxd)
int i, rc;
reg.bits = ioread32(idxd->reg_base + IDXD_GENCFG_OFFSET);
- idxd->token_limit = reg.token_limit;
+ idxd->rdbuf_limit = reg.rdbuf_limit;
for (i = 0; i < idxd->max_groups; i++) {
struct idxd_group *group = idxd->groups[i];
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index bfcb03329f77..833af18a99ee 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -84,9 +84,9 @@ struct idxd_group {
int id;
int num_engines;
int num_wqs;
- bool use_token_limit;
- u8 tokens_allowed;
- u8 tokens_reserved;
+ bool use_rdbuf_limit;
+ u8 rdbufs_allowed;
+ u8 rdbufs_reserved;
int tc_a;
int tc_b;
};
@@ -278,11 +278,11 @@ struct idxd_device {
u32 max_batch_size;
int max_groups;
int max_engines;
- int max_tokens;
+ int max_rdbufs;
int max_wqs;
int max_wq_size;
- int token_limit;
- int nr_tokens; /* non-reserved tokens */
+ int rdbuf_limit;
+ int nr_rdbufs; /* non-reserved read buffers */
unsigned int wqcfg_size;
union sw_err_reg sw_err;
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index 7bf03f371ce1..6263d9825250 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -464,9 +464,9 @@ static void idxd_read_caps(struct idxd_device *idxd)
dev_dbg(dev, "group_cap: %#llx\n", idxd->hw.group_cap.bits);
idxd->max_groups = idxd->hw.group_cap.num_groups;
dev_dbg(dev, "max groups: %u\n", idxd->max_groups);
- idxd->max_tokens = idxd->hw.group_cap.total_tokens;
- dev_dbg(dev, "max tokens: %u\n", idxd->max_tokens);
- idxd->nr_tokens = idxd->max_tokens;
+ idxd->max_rdbufs = idxd->hw.group_cap.total_rdbufs;
+ dev_dbg(dev, "max read buffers: %u\n", idxd->max_rdbufs);
+ idxd->nr_rdbufs = idxd->max_rdbufs;
/* read engine capabilities */
idxd->hw.engine_cap.bits =
diff --git a/drivers/dma/idxd/registers.h b/drivers/dma/idxd/registers.h
index 97ffb06de9b0..c0961c1ac161 100644
--- a/drivers/dma/idxd/registers.h
+++ b/drivers/dma/idxd/registers.h
@@ -65,9 +65,9 @@ union wq_cap_reg {
union group_cap_reg {
struct {
u64 num_groups:8;
- u64 total_tokens:8;
- u64 token_en:1;
- u64 token_limit:1;
+ u64 total_rdbufs:8; /* formerly total_tokens */
+ u64 rdbuf_ctrl:1; /* formerly token_en */
+ u64 rdbuf_limit:1; /* formerly token_limit */
u64 rsvd:46;
};
u64 bits;
@@ -111,7 +111,7 @@ union offsets_reg {
#define IDXD_GENCFG_OFFSET 0x80
union gencfg_reg {
struct {
- u32 token_limit:8;
+ u32 rdbuf_limit:8;
u32 rsvd:4;
u32 user_int_en:1;
u32 rsvd2:19;
@@ -288,10 +288,10 @@ union group_flags {
u32 tc_a:3;
u32 tc_b:3;
u32 rsvd:1;
- u32 use_token_limit:1;
- u32 tokens_reserved:8;
+ u32 use_rdbuf_limit:1;
+ u32 rdbufs_reserved:8;
u32 rsvd2:4;
- u32 tokens_allowed:8;
+ u32 rdbufs_allowed:8;
u32 rsvd3:4;
};
u32 bits;
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index a9025be940db..999ce13a93ad 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -99,17 +99,17 @@ struct device_type idxd_engine_device_type = {
/* Group attributes */
-static void idxd_set_free_tokens(struct idxd_device *idxd)
+static void idxd_set_free_rdbufs(struct idxd_device *idxd)
{
- int i, tokens;
+ int i, rdbufs;
- for (i = 0, tokens = 0; i < idxd->max_groups; i++) {
+ for (i = 0, rdbufs = 0; i < idxd->max_groups; i++) {
struct idxd_group *g = idxd->groups[i];
- tokens += g->tokens_reserved;
+ rdbufs += g->rdbufs_reserved;
}
- idxd->nr_tokens = idxd->max_tokens - tokens;
+ idxd->nr_rdbufs = idxd->max_rdbufs - rdbufs;
}
static ssize_t group_tokens_reserved_show(struct device *dev,
@@ -118,7 +118,7 @@ static ssize_t group_tokens_reserved_show(struct device *dev,
{
struct idxd_group *group = confdev_to_group(dev);
- return sysfs_emit(buf, "%u\n", group->tokens_reserved);
+ return sysfs_emit(buf, "%u\n", group->rdbufs_reserved);
}
static ssize_t group_tokens_reserved_store(struct device *dev,
@@ -143,14 +143,14 @@ static ssize_t group_tokens_reserved_store(struct device *dev,
if (idxd->state == IDXD_DEV_ENABLED)
return -EPERM;
- if (val > idxd->max_tokens)
+ if (val > idxd->max_rdbufs)
return -EINVAL;
- if (val > idxd->nr_tokens + group->tokens_reserved)
+ if (val > idxd->nr_rdbufs + group->rdbufs_reserved)
return -EINVAL;
- group->tokens_reserved = val;
- idxd_set_free_tokens(idxd);
+ group->rdbufs_reserved = val;
+ idxd_set_free_rdbufs(idxd);
return count;
}
@@ -164,7 +164,7 @@ static ssize_t group_tokens_allowed_show(struct device *dev,
{
struct idxd_group *group = confdev_to_group(dev);
- return sysfs_emit(buf, "%u\n", group->tokens_allowed);
+ return sysfs_emit(buf, "%u\n", group->rdbufs_allowed);
}
static ssize_t group_tokens_allowed_store(struct device *dev,
@@ -190,10 +190,10 @@ static ssize_t group_tokens_allowed_store(struct device *dev,
return -EPERM;
if (val < 4 * group->num_engines ||
- val > group->tokens_reserved + idxd->nr_tokens)
+ val > group->rdbufs_reserved + idxd->nr_rdbufs)
return -EINVAL;
- group->tokens_allowed = val;
+ group->rdbufs_allowed = val;
return count;
}
@@ -207,7 +207,7 @@ static ssize_t group_use_token_limit_show(struct device *dev,
{
struct idxd_group *group = confdev_to_group(dev);
- return sysfs_emit(buf, "%u\n", group->use_token_limit);
+ return sysfs_emit(buf, "%u\n", group->use_rdbuf_limit);
}
static ssize_t group_use_token_limit_store(struct device *dev,
@@ -232,10 +232,10 @@ static ssize_t group_use_token_limit_store(struct device *dev,
if (idxd->state == IDXD_DEV_ENABLED)
return -EPERM;
- if (idxd->token_limit == 0)
+ if (idxd->rdbuf_limit == 0)
return -EPERM;
- group->use_token_limit = !!val;
+ group->use_rdbuf_limit = !!val;
return count;
}
@@ -1161,7 +1161,7 @@ static ssize_t max_tokens_show(struct device *dev,
{
struct idxd_device *idxd = confdev_to_idxd(dev);
- return sysfs_emit(buf, "%u\n", idxd->max_tokens);
+ return sysfs_emit(buf, "%u\n", idxd->max_rdbufs);
}
static DEVICE_ATTR_RO(max_tokens);
@@ -1170,7 +1170,7 @@ static ssize_t token_limit_show(struct device *dev,
{
struct idxd_device *idxd = confdev_to_idxd(dev);
- return sysfs_emit(buf, "%u\n", idxd->token_limit);
+ return sysfs_emit(buf, "%u\n", idxd->rdbuf_limit);
}
static ssize_t token_limit_store(struct device *dev,
@@ -1191,13 +1191,13 @@ static ssize_t token_limit_store(struct device *dev,
if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
return -EPERM;
- if (!idxd->hw.group_cap.token_limit)
+ if (!idxd->hw.group_cap.rdbuf_limit)
return -EPERM;
- if (val > idxd->hw.group_cap.total_tokens)
+ if (val > idxd->hw.group_cap.total_rdbufs)
return -EINVAL;
- idxd->token_limit = val;
+ idxd->rdbuf_limit = val;
return count;
}
static DEVICE_ATTR_RW(token_limit);
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 80e4390981618e290616dbd06ea190d4576f219d ]
When valid kernel command line parameters
dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's
environment strings, polluting it.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off dma_debug_entries=100", will be passed to user space.
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off
dma_debug_entries=100
Return 1 from these __setup handlers to indicate that the command line
option has been handled.
Fixes: 59d3daafa1726 ("dma-debug: add kernel command line parameters")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Joerg Roedel <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: [email protected]
Cc: Robin Murphy <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/dma/debug.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index 7a14ca29c377..f8ff598596b8 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -927,7 +927,7 @@ static __init int dma_debug_cmdline(char *str)
global_disable = true;
}
- return 0;
+ return 1;
}
static __init int dma_debug_entries_cmdline(char *str)
@@ -936,7 +936,7 @@ static __init int dma_debug_entries_cmdline(char *str)
return -EINVAL;
if (!get_option(&str, &nr_prealloc_entries))
nr_prealloc_entries = PREALLOC_DMA_DEBUG_ENTRIES;
- return 0;
+ return 1;
}
__setup("dma_debug=", dma_debug_cmdline);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit c09ac191b1f97cfa06f394dbfd7a5db07986cefc ]
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.
Fixes: 32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 39828e9c3120..4757bf964d3c 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1883,8 +1883,10 @@ static int nmk_pinctrl_probe(struct platform_device *pdev)
}
prcm_np = of_parse_phandle(np, "prcm", 0);
- if (prcm_np)
+ if (prcm_np) {
npct->prcm_base = of_iomap(prcm_np, 0);
+ of_node_put(prcm_np);
+ }
if (!npct->prcm_base) {
if (version == PINCTRL_NMK_STN8815) {
dev_info(&pdev->dev,
--
2.34.1
From: Vitaly Kuznetsov <[email protected]>
commit b1e34d325397a33d97d845e312d7cf2a8b646b44 upstream.
Setting non-zero values to SYNIC/STIMER MSRs activates certain features,
this should not happen when KVM_CAP_HYPERV_SYNIC{,2} was not activated.
Note, it would've been better to forbid writing anything to SYNIC/STIMER
MSRs, including zeroes, however, at least QEMU tries clearing
HV_X64_MSR_STIMER0_CONFIG without SynIC. HV_X64_MSR_EOM MSR is somewhat
'special' as writing zero there triggers an action, this also should not
happen when SynIC wasn't activated.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/hyperv.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -236,7 +236,7 @@ static int synic_set_msr(struct kvm_vcpu
struct kvm_vcpu *vcpu = hv_synic_to_vcpu(synic);
int ret;
- if (!synic->active && !host)
+ if (!synic->active && (!host || data))
return 1;
trace_kvm_hv_synic_set_msr(vcpu->vcpu_id, msr, data, host);
@@ -282,6 +282,9 @@ static int synic_set_msr(struct kvm_vcpu
case HV_X64_MSR_EOM: {
int i;
+ if (!synic->active)
+ break;
+
for (i = 0; i < ARRAY_SIZE(synic->sint); i++)
kvm_hv_notify_acked_sint(vcpu, i);
break;
@@ -661,7 +664,7 @@ static int stimer_set_config(struct kvm_
struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
struct kvm_vcpu_hv_synic *synic = to_hv_synic(vcpu);
- if (!synic->active && !host)
+ if (!synic->active && (!host || config))
return 1;
if (unlikely(!host && hv_vcpu->enforce_cpuid && new_config.direct_mode &&
@@ -690,7 +693,7 @@ static int stimer_set_count(struct kvm_v
struct kvm_vcpu *vcpu = hv_stimer_to_vcpu(stimer);
struct kvm_vcpu_hv_synic *synic = to_hv_synic(vcpu);
- if (!synic->active && !host)
+ if (!synic->active && (!host || count))
return 1;
trace_kvm_hv_stimer_set_count(hv_stimer_to_vcpu(stimer)->vcpu_id,
From: Arınç ÜNAL <[email protected]>
commit 25e4f5220efead592c83200241e098e757d37e1f upstream.
Fix pinctrl-0 items under the ethernet node to be size-1 items.
Current notation would be used on specifications with non-zero cells.
Fixes: 0a93c0d75809 ("staging: mt7621-dts: fix pinctrl properties for ethernet")
Reported-by: Sander Vanheule <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/mt7621-dts/mt7621.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -392,7 +392,7 @@
mediatek,ethsys = <&sysc>;
pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>, <&rgmii2_pins>;
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
From: Yi Wang <[email protected]>
commit a80ced6ea514000d34bf1239d47553de0d1ee89e upstream.
As guest_irq is coming from KVM_IRQFD API call, it may trigger
crash in svm_update_pi_irte() due to out-of-bounds:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
Vmx have been fix this in commit 3a8b0677fc61 (KVM: VMX: Do not BUG() on
out-of-bounds guest IRQ), so we can just copy source from that to fix
this.
Co-developed-by: Yi Liu <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Yi Wang <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/svm/avic.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -799,7 +799,7 @@ int svm_update_pi_irte(struct kvm *kvm,
{
struct kvm_kernel_irq_routing_entry *e;
struct kvm_irq_routing_table *irq_rt;
- int idx, ret = -EINVAL;
+ int idx, ret = 0;
if (!kvm_arch_has_assigned_device(kvm) ||
!irq_remapping_cap(IRQ_POSTING_CAP))
@@ -810,7 +810,13 @@ int svm_update_pi_irte(struct kvm *kvm,
idx = srcu_read_lock(&kvm->irq_srcu);
irq_rt = srcu_dereference(kvm->irq_routing, &kvm->irq_srcu);
- WARN_ON(guest_irq >= irq_rt->nr_rt_entries);
+
+ if (guest_irq >= irq_rt->nr_rt_entries ||
+ hlist_empty(&irq_rt->map[guest_irq])) {
+ pr_warn_once("no route for guest_irq %u/%u (broken user space?)\n",
+ guest_irq, irq_rt->nr_rt_entries);
+ goto out;
+ }
hlist_for_each_entry(e, &irq_rt->map[guest_irq], link) {
struct vcpu_data vcpu_info;
From: Stefano Garzarella <[email protected]>
[ Upstream commit 88704454ef8b00ea91537ae0d47d9348077e0e72 ]
virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after probe returns, but virtio-vsock
driver uses VQs in the probe function to fill rx and event VQs
with new buffers.
Let's fix this, calling virtio_device_ready() before using VQs
in the probe function.
Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Signed-off-by: Stefano Garzarella <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/virtio_transport.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 4a8548bdf86c..c5f936fbf876 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -627,6 +627,8 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
vdev->priv = vsock;
+ virtio_device_ready(vdev);
+
mutex_lock(&vsock->tx_lock);
vsock->tx_run = true;
mutex_unlock(&vsock->tx_lock);
--
2.34.1
From: Eric Dumazet <[email protected]>
commit b490207017ba237d97b735b2aa66dc241ccd18f5 upstream.
Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the
watch_queue is torn down") took care of the bitmap, but not the page
array.
BUG: memory leak
unreferenced object 0xffff88810d9bc140 (size 32):
comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s)
hex dump (first 32 bytes):
40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@.............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
kmalloc_array include/linux/slab.h:621 [inline]
kcalloc include/linux/slab.h:652 [inline]
watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251
pipe_ioctl+0x82/0x140 fs/pipe.c:632
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
Reported-by: [email protected]
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David Howells <[email protected]>
Cc: Jann Horn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/watch_queue.c | 1 +
1 file changed, 1 insertion(+)
--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -373,6 +373,7 @@ static void __put_watch_queue(struct kre
for (i = 0; i < wqueue->nr_pages; i++)
__free_page(wqueue->notes[i]);
+ kfree(wqueue->notes);
bitmap_free(wqueue->notes_bitmap);
wfilter = rcu_access_pointer(wqueue->filter);
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit fc0b582c858ed73f94c8f3375c203ea46f1f7402 ]
As warned by sparse:
atomisp: drivers/staging/media/atomisp/pci/atomisp_acc.c:508 atomisp_acc_load_extensions() warn: iterator used outside loop: 'acc_fw'
The acc_fw interactor is used outside the loop, at the error handling
logic. On most cases, this is actually safe there, but, if
atomisp_css_set_acc_parameters() has an error, an attempt to use it
will pick an invalid value for acc_fw.
Reported-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/atomisp_acc.c | 28 +++++++++++++------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_acc.c b/drivers/staging/media/atomisp/pci/atomisp_acc.c
index 9a1751895ab0..28cb271663c4 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_acc.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_acc.c
@@ -439,6 +439,18 @@ int atomisp_acc_s_mapped_arg(struct atomisp_sub_device *asd,
return 0;
}
+static void atomisp_acc_unload_some_extensions(struct atomisp_sub_device *asd,
+ int i,
+ struct atomisp_acc_fw *acc_fw)
+{
+ while (--i >= 0) {
+ if (acc_fw->flags & acc_flag_to_pipe[i].flag) {
+ atomisp_css_unload_acc_extension(asd, acc_fw->fw,
+ acc_flag_to_pipe[i].pipe_id);
+ }
+ }
+}
+
/*
* Appends the loaded acceleration binary extensions to the
* current ISP mode. Must be called just before sh_css_start().
@@ -479,16 +491,20 @@ int atomisp_acc_load_extensions(struct atomisp_sub_device *asd)
acc_fw->fw,
acc_flag_to_pipe[i].pipe_id,
acc_fw->type);
- if (ret)
+ if (ret) {
+ atomisp_acc_unload_some_extensions(asd, i, acc_fw);
goto error;
+ }
ext_loaded = true;
}
}
ret = atomisp_css_set_acc_parameters(acc_fw);
- if (ret < 0)
+ if (ret < 0) {
+ atomisp_acc_unload_some_extensions(asd, i, acc_fw);
goto error;
+ }
}
if (!ext_loaded)
@@ -497,6 +513,7 @@ int atomisp_acc_load_extensions(struct atomisp_sub_device *asd)
ret = atomisp_css_update_stream(asd);
if (ret) {
dev_err(isp->dev, "%s: update stream failed.\n", __func__);
+ atomisp_acc_unload_extensions(asd);
goto error;
}
@@ -504,13 +521,6 @@ int atomisp_acc_load_extensions(struct atomisp_sub_device *asd)
return 0;
error:
- while (--i >= 0) {
- if (acc_fw->flags & acc_flag_to_pipe[i].flag) {
- atomisp_css_unload_acc_extension(asd, acc_fw->fw,
- acc_flag_to_pipe[i].pipe_id);
- }
- }
-
list_for_each_entry_continue_reverse(acc_fw, &asd->acc.fw, list) {
if (acc_fw->type != ATOMISP_ACC_FW_LOAD_TYPE_OUTPUT &&
acc_fw->type != ATOMISP_ACC_FW_LOAD_TYPE_VIEWFINDER)
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit ba18dad0fb880cd29aa97b6b75560ef14d1061ba ]
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/reset/gemini-poweroff.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c
index 90e35c07240a..b7f7a8225f22 100644
--- a/drivers/power/reset/gemini-poweroff.c
+++ b/drivers/power/reset/gemini-poweroff.c
@@ -107,8 +107,8 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
return PTR_ERR(gpw->base);
irq = platform_get_irq(pdev, 0);
- if (!irq)
- return -EINVAL;
+ if (irq < 0)
+ return irq;
gpw->dev = dev;
--
2.34.1
From: Robert Hancock <[email protected]>
[ Upstream commit 4f3a00c7f5b2cfe4e127fd3fe49b55e1b318c01f ]
The fix to select the copper page on AR8031 was being done in the probe
function rather than config_init, so it would not be redone after resume
from suspend. Move this to config_init so it is always redone when
needed.
Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/at803x.c | 40 ++++++++++++++++------------------------
1 file changed, 16 insertions(+), 24 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index bdac087058b2..5ae39d236b30 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -666,25 +666,7 @@ static int at803x_probe(struct phy_device *phydev)
return ret;
}
- /* Some bootloaders leave the fiber page selected.
- * Switch to the copper page, as otherwise we read
- * the PHY capabilities from the fiber side.
- */
- if (phydev->drv->phy_id == ATH8031_PHY_ID) {
- phy_lock_mdio_bus(phydev);
- ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
- phy_unlock_mdio_bus(phydev);
- if (ret)
- goto err;
- }
-
return 0;
-
-err:
- if (priv->vddio)
- regulator_disable(priv->vddio);
-
- return ret;
}
static void at803x_remove(struct phy_device *phydev)
@@ -785,6 +767,22 @@ static int at803x_config_init(struct phy_device *phydev)
{
int ret;
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
+ /* Some bootloaders leave the fiber page selected.
+ * Switch to the copper page, as otherwise we read
+ * the PHY capabilities from the fiber side.
+ */
+ phy_lock_mdio_bus(phydev);
+ ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
+ phy_unlock_mdio_bus(phydev);
+ if (ret)
+ return ret;
+
+ ret = at8031_pll_config(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
/* The RX and TX delay default is:
* after HW reset: RX delay enabled and TX delay disabled
* after SW reset: RX delay enabled, while TX delay retains the
@@ -814,12 +812,6 @@ static int at803x_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
- if (phydev->drv->phy_id == ATH8031_PHY_ID) {
- ret = at8031_pll_config(phydev);
- if (ret < 0)
- return ret;
- }
-
/* Ar803x extended next page bit is enabled by default. Cisco
* multigig switches read this bit and attempt to negotiate 10Gbps
* rates even if the next page bit is disabled. This is incorrect
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 405afed8a728f23cfaa02f75bbc8bdd6b7322123 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: ab6f6d85210c ("ASoC: fsi: add master clock control functions")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/fsi.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index cdf3b7f69ba7..e9a1eb6bdf66 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -816,14 +816,27 @@ static int fsi_clk_enable(struct device *dev,
return ret;
}
- clk_enable(clock->xck);
- clk_enable(clock->ick);
- clk_enable(clock->div);
+ ret = clk_enable(clock->xck);
+ if (ret)
+ goto err;
+ ret = clk_enable(clock->ick);
+ if (ret)
+ goto disable_xck;
+ ret = clk_enable(clock->div);
+ if (ret)
+ goto disable_ick;
clock->count++;
}
return ret;
+
+disable_ick:
+ clk_disable(clock->ick);
+disable_xck:
+ clk_disable(clock->xck);
+err:
+ return ret;
}
static int fsi_clk_disable(struct device *dev,
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 6dee930f6f6776d1e5a7edf542c6863b47d9f078 ]
In free_charger_irq(), there is no free for 'WM8350_IRQ_CHG_FAST_RDY'.
Therefore, it should be better to add it in order to avoid the memory leak.
Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/wm8350_power.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/power/supply/wm8350_power.c b/drivers/power/supply/wm8350_power.c
index 9c46c48dccb1..908cfd45d262 100644
--- a/drivers/power/supply/wm8350_power.c
+++ b/drivers/power/supply/wm8350_power.c
@@ -524,6 +524,7 @@ static void free_charger_irq(struct wm8350 *wm8350)
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
--
2.34.1
From: Magnus Karlsson <[email protected]>
[ Upstream commit 18b1ab7aa76bde181bdb1ab19a87fa9523c32f21 ]
Fix a race in the xsk socket teardown code that can lead to a NULL pointer
dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by
setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any
NAPI processing to terminate using synchronize_net(). After that, the release
code starts to tear down the socket state and free allocated memory.
BUG: kernel NULL pointer dereference, address: 00000000000000c0
PGD 8000000932469067 P4D 8000000932469067 PUD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 25 PID: 69132 Comm: grpcpp_sync_ser Tainted: G I 5.16.0+ #2
Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.2.10 03/09/2015
RIP: 0010:__xsk_sendmsg+0x2c/0x690
[...]
RSP: 0018:ffffa2348bd13d50 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000040 RCX: ffff8d5fc632d258
RDX: 0000000000400000 RSI: ffffa2348bd13e10 RDI: ffff8d5fc5489800
RBP: ffffa2348bd13db0 R08: 0000000000000000 R09: 00007ffffffff000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d5fc5489800
R13: ffff8d5fcb0f5140 R14: ffff8d5fcb0f5140 R15: 0000000000000000
FS: 00007f991cff9400(0000) GS:ffff8d6f1f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 0000000114888005 CR4: 00000000001706e0
Call Trace:
<TASK>
? aa_sk_perm+0x43/0x1b0
xsk_sendmsg+0xf0/0x110
sock_sendmsg+0x65/0x70
__sys_sendto+0x113/0x190
? debug_smp_processor_id+0x17/0x20
? fpregs_assert_state_consistent+0x23/0x50
? exit_to_user_mode_prepare+0xa5/0x1d0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
There are two problems with the current code. First, setting xs->dev to NULL
before waiting for all users to stop using the socket is not correct. The
entry to the data plane functions xsk_poll(), xsk_sendmsg(), and xsk_recvmsg()
are all guarded by a test that xs->state is in the state XSK_BOUND and if not,
it returns right away. But one process might have passed this test but still
have not gotten to the point in which it uses xs->dev in the code. In this
interim, a second process executing xsk_unbind_dev() might have set xs->dev to
NULL which will lead to a crash for the first process. The solution here is
just to get rid of this NULL assignment since it is not used anymore. Before
commit 42fddcc7c64b ("xsk: use state member for socket synchronization"),
xs->dev was the gatekeeper to admit processes into the data plane functions,
but it was replaced with the state variable xs->state in the aforementioned
commit.
The second problem is that synchronize_net() does not wait for any process in
xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() to complete, which means that the
state they rely on might be cleaned up prematurely. This can happen when the
notifier gets called (at driver unload for example) as it uses xsk_unbind_dev().
Solve this by extending the RCU critical region from just the ndo_xsk_wakeup
to the whole functions mentioned above, so that both the test of xs->state ==
XSK_BOUND and the last use of any member of xs is covered by the RCU critical
section. This will guarantee that when synchronize_net() completes, there will
be no processes left executing xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() and
state can be cleaned up safely. Note that we need to drop the RCU lock for the
skb xmit path as it uses functions that might sleep. Due to this, we have to
retest the xs->state after we grab the mutex that protects the skb xmit code
from, among a number of things, an xsk_unbind_dev() being executed from the
notifier at the same time.
Fixes: 42fddcc7c64b ("xsk: use state member for socket synchronization")
Reported-by: Elza Mathew <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/xdp/xsk.c | 69 +++++++++++++++++++++++++++++++++++++--------------
1 file changed, 50 insertions(+), 19 deletions(-)
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index d6b500dc4208..426e287431d2 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -418,18 +418,8 @@ EXPORT_SYMBOL(xsk_tx_peek_release_desc_batch);
static int xsk_wakeup(struct xdp_sock *xs, u8 flags)
{
struct net_device *dev = xs->dev;
- int err;
-
- rcu_read_lock();
- err = dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id, flags);
- rcu_read_unlock();
-
- return err;
-}
-static int xsk_zc_xmit(struct xdp_sock *xs)
-{
- return xsk_wakeup(xs, XDP_WAKEUP_TX);
+ return dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id, flags);
}
static void xsk_destruct_skb(struct sk_buff *skb)
@@ -548,6 +538,12 @@ static int xsk_generic_xmit(struct sock *sk)
mutex_lock(&xs->mutex);
+ /* Since we dropped the RCU read lock, the socket state might have changed. */
+ if (unlikely(!xsk_is_bound(xs))) {
+ err = -ENXIO;
+ goto out;
+ }
+
if (xs->queue_id >= xs->dev->real_num_tx_queues)
goto out;
@@ -611,16 +607,26 @@ static int xsk_generic_xmit(struct sock *sk)
return err;
}
-static int __xsk_sendmsg(struct sock *sk)
+static int xsk_xmit(struct sock *sk)
{
struct xdp_sock *xs = xdp_sk(sk);
+ int ret;
if (unlikely(!(xs->dev->flags & IFF_UP)))
return -ENETDOWN;
if (unlikely(!xs->tx))
return -ENOBUFS;
- return xs->zc ? xsk_zc_xmit(xs) : xsk_generic_xmit(sk);
+ if (xs->zc)
+ return xsk_wakeup(xs, XDP_WAKEUP_TX);
+
+ /* Drop the RCU lock since the SKB path might sleep. */
+ rcu_read_unlock();
+ ret = xsk_generic_xmit(sk);
+ /* Reaquire RCU lock before going into common code. */
+ rcu_read_lock();
+
+ return ret;
}
static bool xsk_no_wakeup(struct sock *sk)
@@ -634,7 +640,7 @@ static bool xsk_no_wakeup(struct sock *sk)
#endif
}
-static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
+static int __xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
{
bool need_wait = !(m->msg_flags & MSG_DONTWAIT);
struct sock *sk = sock->sk;
@@ -654,11 +660,22 @@ static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
pool = xs->pool;
if (pool->cached_need_wakeup & XDP_WAKEUP_TX)
- return __xsk_sendmsg(sk);
+ return xsk_xmit(sk);
return 0;
}
-static int xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int flags)
+static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
+{
+ int ret;
+
+ rcu_read_lock();
+ ret = __xsk_sendmsg(sock, m, total_len);
+ rcu_read_unlock();
+
+ return ret;
+}
+
+static int __xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int flags)
{
bool need_wait = !(flags & MSG_DONTWAIT);
struct sock *sk = sock->sk;
@@ -684,6 +701,17 @@ static int xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int fl
return 0;
}
+static int xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int flags)
+{
+ int ret;
+
+ rcu_read_lock();
+ ret = __xsk_recvmsg(sock, m, len, flags);
+ rcu_read_unlock();
+
+ return ret;
+}
+
static __poll_t xsk_poll(struct file *file, struct socket *sock,
struct poll_table_struct *wait)
{
@@ -694,8 +722,11 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
sock_poll_wait(file, sock, wait);
- if (unlikely(!xsk_is_bound(xs)))
+ rcu_read_lock();
+ if (unlikely(!xsk_is_bound(xs))) {
+ rcu_read_unlock();
return mask;
+ }
pool = xs->pool;
@@ -704,7 +735,7 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
xsk_wakeup(xs, pool->cached_need_wakeup);
else
/* Poll needs to drive Tx also in copy mode */
- __xsk_sendmsg(sk);
+ xsk_xmit(sk);
}
if (xs->rx && !xskq_prod_is_empty(xs->rx))
@@ -712,6 +743,7 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
if (xs->tx && xsk_tx_writeable(xs))
mask |= EPOLLOUT | EPOLLWRNORM;
+ rcu_read_unlock();
return mask;
}
@@ -743,7 +775,6 @@ static void xsk_unbind_dev(struct xdp_sock *xs)
/* Wait for driver to stop using the xdp socket. */
xp_del_xsk(xs->pool, xs);
- xs->dev = NULL;
synchronize_net();
dev_put(dev);
}
--
2.34.1
From: Shengjiu Wang <[email protected]>
[ Upstream commit f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ]
In the case like dmaengine which's not a dai but as a component, the
num_dai is zero, dmaengine component has the same component_of_node
as cpu dai, when cpu dai component is not ready, but dmaengine component
is ready, try to get cpu dai name, the snd_soc_get_dai_name() return
-EINVAL, not -EPROBE_DEFER, that cause below error:
asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22
The sound card failed to probe.
So this patch fixes the issue above by skipping the zero num_dai
component in searching dai name.
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 80ca260595fd..5da762807824 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3208,7 +3208,7 @@ int snd_soc_get_dai_name(const struct of_phandle_args *args,
for_each_component(pos) {
struct device_node *component_of_node = soc_component_to_node(pos);
- if (component_of_node != args->np)
+ if (component_of_node != args->np || !pos->num_dai)
continue;
ret = snd_soc_component_of_xlate_dai_name(pos, args, dai_name);
--
2.34.1
From: Zev Weiss <[email protected]>
[ Upstream commit e011df3579ac980d840db8e8c3b9431f88ebddab ]
We've ended up with some inconsistencies between the addresses in the
DT node labels and the actual offsets of the partitions; this brings
them back in sync.
Signed-off-by: Zev Weiss <[email protected]>
Fixes: 529022738c8e ("ARM: dts: Add OpenBMC flash layout")
Fixes: 8dec60e7b8d0 ("ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout")
Reviewed-by: Lei YU <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/openbmc-flash-layout-64.dtsi | 2 +-
arch/arm/boot/dts/openbmc-flash-layout.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
index 31f59de5190b..7af41361c480 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -28,7 +28,7 @@ partitions {
label = "rofs";
};
- rwfs@6000000 {
+ rwfs@2a00000 {
reg = <0x2a00000 0x1600000>; // 22MB
label = "rwfs";
};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
label = "kernel";
};
- rofs@c0000 {
+ rofs@4c0000 {
reg = <0x4c0000 0x1740000>;
label = "rofs";
};
--
2.34.1
From: José Roberto de Souza <[email protected]>
[ Upstream commit 3a84fd1ed53582b31e843a152ee3219e9e4ccb8c ]
Commit 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel
powered off") completely broke short pulse handling for eDP as it is
usually generated by sink when it is displaying image and there is
some error or status that source needs to handle.
When power panel is enabled, this state is enough to power aux
transactions and VDD override is disabled, so intel_pps_have_power()
is always returning false causing short pulses to be ignored.
So here better naming this function that intends to check if aux
lines are powered to avoid the endless cycle mentioned in the commit
being fixed and fixing the check for what it is intended.
v2:
- renamed to intel_pps_have_panel_power_or_vdd()
- fixed indentation
Fixes: 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel powered off")
Cc: Anshuman Gupta <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Uma Shankar <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 8f0c1c0949b609acfad62b8d5f742a3b5e7b05ab)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
drivers/gpu/drm/i915/display/intel_pps.c | 6 +++---
drivers/gpu/drm/i915/display/intel_pps.h | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index dbff4b6aa22b..631cf7d4323c 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -4599,7 +4599,7 @@ intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd)
struct intel_dp *intel_dp = &dig_port->dp;
if (dig_port->base.type == INTEL_OUTPUT_EDP &&
- (long_hpd || !intel_pps_have_power(intel_dp))) {
+ (long_hpd || !intel_pps_have_panel_power_or_vdd(intel_dp))) {
/*
* vdd off can generate a long/short pulse on eDP which
* would require vdd on to handle it, and thus we
diff --git a/drivers/gpu/drm/i915/display/intel_pps.c b/drivers/gpu/drm/i915/display/intel_pps.c
index a36ec4a818ff..466bf6820641 100644
--- a/drivers/gpu/drm/i915/display/intel_pps.c
+++ b/drivers/gpu/drm/i915/display/intel_pps.c
@@ -1074,14 +1074,14 @@ static void intel_pps_vdd_sanitize(struct intel_dp *intel_dp)
edp_panel_vdd_schedule_off(intel_dp);
}
-bool intel_pps_have_power(struct intel_dp *intel_dp)
+bool intel_pps_have_panel_power_or_vdd(struct intel_dp *intel_dp)
{
intel_wakeref_t wakeref;
bool have_power = false;
with_intel_pps_lock(intel_dp, wakeref) {
- have_power = edp_have_panel_power(intel_dp) &&
- edp_have_panel_vdd(intel_dp);
+ have_power = edp_have_panel_power(intel_dp) ||
+ edp_have_panel_vdd(intel_dp);
}
return have_power;
diff --git a/drivers/gpu/drm/i915/display/intel_pps.h b/drivers/gpu/drm/i915/display/intel_pps.h
index fbbcca782e7b..9fe7be4fe867 100644
--- a/drivers/gpu/drm/i915/display/intel_pps.h
+++ b/drivers/gpu/drm/i915/display/intel_pps.h
@@ -36,7 +36,7 @@ void intel_pps_vdd_on(struct intel_dp *intel_dp);
void intel_pps_on(struct intel_dp *intel_dp);
void intel_pps_off(struct intel_dp *intel_dp);
void intel_pps_vdd_off_sync(struct intel_dp *intel_dp);
-bool intel_pps_have_power(struct intel_dp *intel_dp);
+bool intel_pps_have_panel_power_or_vdd(struct intel_dp *intel_dp);
void intel_pps_wait_power_cycle(struct intel_dp *intel_dp);
void intel_pps_init(struct intel_dp *intel_dp);
--
2.34.1
From: Randy Dunlap <[email protected]>
commit e6d094936988910ce6e8197570f2753898830081 upstream.
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment). This prevents:
Unknown kernel command line parameters \
"BOOT_IMAGE=/boot/bzImage-517rc5 stack_guard_gap=100", will be \
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
stack_guard_gap=100
Return 1 to indicate that the boot option has been handled.
Note that there is no warning message if someone enters:
stack_guard_gap=anything_invalid
and 'val' and stack_guard_gap are both set to 0 due to the use of
simple_strtoul(). This could be improved by using kstrtoxxx() and
checking for an error.
It appears that having stack_guard_gap == 0 is valid (if unexpected) since
using "stack_guard_gap=0" on the kernel command line does that.
Link: https://lkml.kernel.org/r/[email protected]
Link: lore.kernel.org/r/[email protected]
Fixes: 1be7107fbe18e ("mm: larger stack guard gap, between vmas")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2551,7 +2551,7 @@ static int __init cmdline_parse_stack_gu
if (!*endptr)
stack_guard_gap = val << PAGE_SHIFT;
- return 0;
+ return 1;
}
__setup("stack_guard_gap=", cmdline_parse_stack_guard_gap);
From: Corentin Labbe <[email protected]>
[ Upstream commit e3b86f4e558cea9eed71d894df2f19b10d60a207 ]
On the case tmp_dcim=1, the index of buffer is miscalculated.
This generate a NULL pointer dereference later.
So let's fix the calcul and add a check to prevent this to reappear.
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/zoran/zoran_device.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/zoran/zoran_device.c b/drivers/staging/media/zoran/zoran_device.c
index 5b12a730a229..fb1f0465ca87 100644
--- a/drivers/staging/media/zoran/zoran_device.c
+++ b/drivers/staging/media/zoran/zoran_device.c
@@ -814,7 +814,7 @@ static void zoran_reap_stat_com(struct zoran *zr)
if (zr->jpg_settings.tmp_dcm == 1)
i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
else
- i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2 + 1;
+ i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2;
stat_com = le32_to_cpu(zr->stat_com[i]);
if ((stat_com & 1) == 0) {
@@ -826,6 +826,11 @@ static void zoran_reap_stat_com(struct zoran *zr)
size = (stat_com & GENMASK(22, 1)) >> 1;
buf = zr->inuse[i];
+ if (!buf) {
+ spin_unlock_irqrestore(&zr->queued_bufs_lock, flags);
+ pci_err(zr->pci_dev, "No buffer at slot %d\n", i);
+ return;
+ }
buf->vbuf.vb2_buf.timestamp = ktime_get_ns();
if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit 82e3a496eb56da0b9f29fdc5b63cedb3289e91de ]
Move some code out of zr36057_init() and create new functions for handling
zr->video_dev. This permit to ease code reading and fix a zr->video_dev
memory leak.
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/zoran/zoran.h | 2 +-
drivers/staging/media/zoran/zoran_card.c | 80 ++++++++++++++--------
drivers/staging/media/zoran/zoran_driver.c | 5 +-
3 files changed, 54 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/media/zoran/zoran.h b/drivers/staging/media/zoran/zoran.h
index b1ad2a2b914c..50d5a7acfab6 100644
--- a/drivers/staging/media/zoran/zoran.h
+++ b/drivers/staging/media/zoran/zoran.h
@@ -313,6 +313,6 @@ static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev)
#endif
-int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq);
+int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir);
void zoran_queue_exit(struct zoran *zr);
int zr_set_buf(struct zoran *zr);
diff --git a/drivers/staging/media/zoran/zoran_card.c b/drivers/staging/media/zoran/zoran_card.c
index c578ef3c32f5..a83314b16548 100644
--- a/drivers/staging/media/zoran/zoran_card.c
+++ b/drivers/staging/media/zoran/zoran_card.c
@@ -803,6 +803,52 @@ int zoran_check_jpg_settings(struct zoran *zr,
return 0;
}
+static int zoran_init_video_device(struct zoran *zr, struct video_device *video_dev, int dir)
+{
+ int err;
+
+ /* Now add the template and register the device unit. */
+ *video_dev = zoran_template;
+ video_dev->v4l2_dev = &zr->v4l2_dev;
+ video_dev->lock = &zr->lock;
+ video_dev->device_caps = V4L2_CAP_STREAMING | dir;
+
+ strscpy(video_dev->name, ZR_DEVNAME(zr), sizeof(video_dev->name));
+ /*
+ * It's not a mem2mem device, but you can both capture and output from one and the same
+ * device. This should really be split up into two device nodes, but that's a job for
+ * another day.
+ */
+ video_dev->vfl_dir = VFL_DIR_M2M;
+ zoran_queue_init(zr, &zr->vq, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+ err = video_register_device(video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]);
+ if (err < 0)
+ return err;
+ video_set_drvdata(video_dev, zr);
+ return 0;
+}
+
+static void zoran_exit_video_devices(struct zoran *zr)
+{
+ video_unregister_device(zr->video_dev);
+ kfree(zr->video_dev);
+}
+
+static int zoran_init_video_devices(struct zoran *zr)
+{
+ int err;
+
+ zr->video_dev = video_device_alloc();
+ if (!zr->video_dev)
+ return -ENOMEM;
+
+ err = zoran_init_video_device(zr, zr->video_dev, V4L2_CAP_VIDEO_CAPTURE);
+ if (err)
+ kfree(zr->video_dev);
+ return err;
+}
+
void zoran_open_init_params(struct zoran *zr)
{
int i;
@@ -874,17 +920,11 @@ static int zr36057_init(struct zoran *zr)
zoran_open_init_params(zr);
/* allocate memory *before* doing anything to the hardware in case allocation fails */
- zr->video_dev = video_device_alloc();
- if (!zr->video_dev) {
- err = -ENOMEM;
- goto exit;
- }
zr->stat_com = dma_alloc_coherent(&zr->pci_dev->dev,
BUZ_NUM_STAT_COM * sizeof(u32),
&zr->p_sc, GFP_KERNEL);
if (!zr->stat_com) {
- err = -ENOMEM;
- goto exit_video;
+ return -ENOMEM;
}
for (j = 0; j < BUZ_NUM_STAT_COM; j++)
zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */
@@ -897,26 +937,9 @@ static int zr36057_init(struct zoran *zr)
goto exit_statcom;
}
- /* Now add the template and register the device unit. */
- *zr->video_dev = zoran_template;
- zr->video_dev->v4l2_dev = &zr->v4l2_dev;
- zr->video_dev->lock = &zr->lock;
- zr->video_dev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
-
- strscpy(zr->video_dev->name, ZR_DEVNAME(zr), sizeof(zr->video_dev->name));
- /*
- * It's not a mem2mem device, but you can both capture and output from one and the same
- * device. This should really be split up into two device nodes, but that's a job for
- * another day.
- */
- zr->video_dev->vfl_dir = VFL_DIR_M2M;
-
- zoran_queue_init(zr, &zr->vq);
-
- err = video_register_device(zr->video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]);
- if (err < 0)
+ err = zoran_init_video_devices(zr);
+ if (err)
goto exit_statcomb;
- video_set_drvdata(zr->video_dev, zr);
zoran_init_hardware(zr);
if (!pass_through) {
@@ -931,9 +954,6 @@ static int zr36057_init(struct zoran *zr)
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, zr->stat_comb, zr->p_scb);
exit_statcom:
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32), zr->stat_com, zr->p_sc);
-exit_video:
- kfree(zr->video_dev);
-exit:
return err;
}
@@ -965,7 +985,7 @@ static void zoran_remove(struct pci_dev *pdev)
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, zr->stat_comb, zr->p_scb);
pci_release_regions(pdev);
pci_disable_device(zr->pci_dev);
- video_unregister_device(zr->video_dev);
+ zoran_exit_video_devices(zr);
exit_free:
v4l2_ctrl_handler_free(&zr->hdl);
v4l2_device_unregister(&zr->v4l2_dev);
diff --git a/drivers/staging/media/zoran/zoran_driver.c b/drivers/staging/media/zoran/zoran_driver.c
index 46382e43f1bf..551db338c7f7 100644
--- a/drivers/staging/media/zoran/zoran_driver.c
+++ b/drivers/staging/media/zoran/zoran_driver.c
@@ -1008,7 +1008,7 @@ static const struct vb2_ops zr_video_qops = {
.wait_finish = vb2_ops_wait_finish,
};
-int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)
+int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir)
{
int err;
@@ -1016,7 +1016,8 @@ int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)
INIT_LIST_HEAD(&zr->queued_bufs);
vq->dev = &zr->pci_dev->dev;
- vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ vq->type = dir;
+
vq->io_modes = VB2_USERPTR | VB2_DMABUF | VB2_MMAP | VB2_READ | VB2_WRITE;
vq->drv_priv = zr;
vq->buf_struct_size = sizeof(struct zr_buffer);
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit fd7bd80b46373887b390852f490f21b07e209498 ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
setup_interrupts() and return error if fails.
Fixes: 68b4aee35d1f ("memory: emif: add interrupt and temperature handling")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/emif.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 762d0c0f0716..d4d4044e05b3 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -1117,7 +1117,7 @@ static int __init_or_module emif_probe(struct platform_device *pdev)
{
struct emif_data *emif;
struct resource *res;
- int irq;
+ int irq, ret;
if (pdev->dev.of_node)
emif = of_get_memory_device_details(pdev->dev.of_node, &pdev->dev);
@@ -1147,7 +1147,9 @@ static int __init_or_module emif_probe(struct platform_device *pdev)
emif_onetime_settings(emif);
emif_debugfs_init(emif);
disable_and_clear_all_interrupts(emif);
- setup_interrupts(emif, irq);
+ ret = setup_interrupts(emif, irq);
+ if (ret)
+ goto error;
/* One-time actions taken on probing the first device */
if (!emif1) {
--
2.34.1
From: Jason A. Donenfeld <[email protected]>
commit 77fc73ac89be96ec8f39e8efa53885caa7cb3645 upstream.
The previous commit fixed a memory leak on the send path in the event
that IPv6 is disabled at compile time, but how did a packet even arrive
there to begin with? It turns out we have previously allowed IPv6
endpoints even when IPv6 support is disabled at compile time. This is
awkward and inconsistent. Instead, let's just ignore all things IPv6,
the same way we do other malformed endpoints, in the case where IPv6 is
disabled.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireguard/socket.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/wireguard/socket.c
+++ b/drivers/net/wireguard/socket.c
@@ -242,7 +242,7 @@ int wg_socket_endpoint_from_skb(struct e
endpoint->addr4.sin_addr.s_addr = ip_hdr(skb)->saddr;
endpoint->src4.s_addr = ip_hdr(skb)->daddr;
endpoint->src_if4 = skb->skb_iif;
- } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ } else if (IS_ENABLED(CONFIG_IPV6) && skb->protocol == htons(ETH_P_IPV6)) {
endpoint->addr6.sin6_family = AF_INET6;
endpoint->addr6.sin6_port = udp_hdr(skb)->source;
endpoint->addr6.sin6_addr = ipv6_hdr(skb)->saddr;
@@ -285,7 +285,7 @@ void wg_socket_set_peer_endpoint(struct
peer->endpoint.addr4 = endpoint->addr4;
peer->endpoint.src4 = endpoint->src4;
peer->endpoint.src_if4 = endpoint->src_if4;
- } else if (endpoint->addr.sa_family == AF_INET6) {
+ } else if (IS_ENABLED(CONFIG_IPV6) && endpoint->addr.sa_family == AF_INET6) {
peer->endpoint.addr6 = endpoint->addr6;
peer->endpoint.src6 = endpoint->src6;
} else {
From: Hou Tao <[email protected]>
[ Upstream commit 68e4f238b0e9d3670a1612ad900a6e98b2b3f7dd ]
BPF line info needs ctx->offset to be the instruction offset in the whole JITed
image instead of the body itself, so also call build_prologue() first in first
JIT pass.
Fixes: 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/net/bpf_jit_comp.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 465c44d0c72f..d13d9e5085a7 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1042,15 +1042,18 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
goto out_off;
}
- /* 1. Initial fake pass to compute ctx->idx. */
-
- /* Fake pass to fill in ctx->offset. */
- if (build_body(&ctx, extra_pass)) {
+ /*
+ * 1. Initial fake pass to compute ctx->idx and ctx->offset.
+ *
+ * BPF line info needs ctx->offset[i] to be the offset of
+ * instruction[i] in jited image, so build prologue first.
+ */
+ if (build_prologue(&ctx, was_classic)) {
prog = orig_prog;
goto out_off;
}
- if (build_prologue(&ctx, was_classic)) {
+ if (build_body(&ctx, extra_pass)) {
prog = orig_prog;
goto out_off;
}
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit 1a37b6738b58d86f6b144b3fc754ace0f2e0166d ]
Since the sata_cmd struct is zeroed out before its fields are initialized,
there is no need for using "|=" to initialize the ncqtag_atap_dir_m
field. Using a standard assignment removes the sparse warning:
warning: invalid assignment: |=
Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32()
to generate the assigned value.
Link: https://lore.kernel.org/r/[email protected]
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 5e6b23da4157..1e1630a1a97c 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1860,7 +1860,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
sata_cmd.tag = cpu_to_le32(ccb_tag);
sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
- sata_cmd.ncqtag_atap_dir_m |= ((0x1 << 7) | (0x5 << 9));
+ sata_cmd.ncqtag_atap_dir_m = cpu_to_le32((0x1 << 7) | (0x5 << 9));
memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd,
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 3056f3615ab8..11887ac8ad0f 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1881,7 +1881,7 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
sata_cmd.tag = cpu_to_le32(ccb_tag);
sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
- sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9));
+ sata_cmd.ncqtag_atap_dir_m_dad = cpu_to_le32(((0x1 << 7) | (0x5 << 9)));
memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd,
--
2.34.1
From: Gwendal Grignou <[email protected]>
commit eabd9a3807e17e211690e6c40f1405b427b64c48 upstream.
cros_ec_trace.h defined 5 tracing events, 2 for cros_ec_proto and
3 for cros_ec_sensorhub_ring.
These 2 files are in different kernel modules, the traces are defined
twice in the kernel which leads to problem enabling only some traces.
Move sensorhub traces from cros_ec_trace.h to cros_ec_sensorhub_trace.h
and enable them only in cros_ec_sensorhub kernel module.
Check we can now enable any single traces: without this patch,
we can only enable all sensorhub traces or none.
Fixes: d453ceb6549a ("platform/chrome: sensorhub: Add trace events for sample")
Signed-off-by: Gwendal Grignou <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benson Leung <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/chrome/Makefile | 3
drivers/platform/chrome/cros_ec_sensorhub_ring.c | 3
drivers/platform/chrome/cros_ec_sensorhub_trace.h | 123 ++++++++++++++++++++++
drivers/platform/chrome/cros_ec_trace.h | 95 ----------------
4 files changed, 127 insertions(+), 97 deletions(-)
create mode 100644 drivers/platform/chrome/cros_ec_sensorhub_trace.h
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -2,6 +2,7 @@
# tell define_trace.h where to find the cros ec trace header
CFLAGS_cros_ec_trace.o:= -I$(src)
+CFLAGS_cros_ec_sensorhub_ring.o:= -I$(src)
obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o
obj-$(CONFIG_CHROMEOS_PSTORE) += chromeos_pstore.o
@@ -20,7 +21,7 @@ obj-$(CONFIG_CROS_EC_CHARDEV) += cros_e
obj-$(CONFIG_CROS_EC_LIGHTBAR) += cros_ec_lightbar.o
obj-$(CONFIG_CROS_EC_VBC) += cros_ec_vbc.o
obj-$(CONFIG_CROS_EC_DEBUGFS) += cros_ec_debugfs.o
-cros-ec-sensorhub-objs := cros_ec_sensorhub.o cros_ec_sensorhub_ring.o cros_ec_trace.o
+cros-ec-sensorhub-objs := cros_ec_sensorhub.o cros_ec_sensorhub_ring.o
obj-$(CONFIG_CROS_EC_SENSORHUB) += cros-ec-sensorhub.o
obj-$(CONFIG_CROS_EC_SYSFS) += cros_ec_sysfs.o
obj-$(CONFIG_CROS_USBPD_LOGGER) += cros_usbpd_logger.o
--- a/drivers/platform/chrome/cros_ec_sensorhub_ring.c
+++ b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
@@ -17,7 +17,8 @@
#include <linux/sort.h>
#include <linux/slab.h>
-#include "cros_ec_trace.h"
+#define CREATE_TRACE_POINTS
+#include "cros_ec_sensorhub_trace.h"
/* Precision of fixed point for the m values from the filter */
#define M_PRECISION BIT(23)
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_sensorhub_trace.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Trace events for the ChromeOS Sensorhub kernel module
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cros_ec
+
+#if !defined(_CROS_EC_SENSORHUB_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _CROS_EC_SENSORHUB_TRACE_H_
+
+#include <linux/types.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(cros_ec_sensorhub_timestamp,
+ TP_PROTO(u32 ec_sample_timestamp, u32 ec_fifo_timestamp, s64 fifo_timestamp,
+ s64 current_timestamp, s64 current_time),
+ TP_ARGS(ec_sample_timestamp, ec_fifo_timestamp, fifo_timestamp, current_timestamp,
+ current_time),
+ TP_STRUCT__entry(
+ __field(u32, ec_sample_timestamp)
+ __field(u32, ec_fifo_timestamp)
+ __field(s64, fifo_timestamp)
+ __field(s64, current_timestamp)
+ __field(s64, current_time)
+ __field(s64, delta)
+ ),
+ TP_fast_assign(
+ __entry->ec_sample_timestamp = ec_sample_timestamp;
+ __entry->ec_fifo_timestamp = ec_fifo_timestamp;
+ __entry->fifo_timestamp = fifo_timestamp;
+ __entry->current_timestamp = current_timestamp;
+ __entry->current_time = current_time;
+ __entry->delta = current_timestamp - current_time;
+ ),
+ TP_printk("ec_ts: %9u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
+ __entry->ec_sample_timestamp,
+ __entry->ec_fifo_timestamp,
+ __entry->fifo_timestamp,
+ __entry->current_timestamp,
+ __entry->current_time,
+ __entry->delta
+ )
+);
+
+TRACE_EVENT(cros_ec_sensorhub_data,
+ TP_PROTO(u32 ec_sensor_num, u32 ec_fifo_timestamp, s64 fifo_timestamp,
+ s64 current_timestamp, s64 current_time),
+ TP_ARGS(ec_sensor_num, ec_fifo_timestamp, fifo_timestamp, current_timestamp, current_time),
+ TP_STRUCT__entry(
+ __field(u32, ec_sensor_num)
+ __field(u32, ec_fifo_timestamp)
+ __field(s64, fifo_timestamp)
+ __field(s64, current_timestamp)
+ __field(s64, current_time)
+ __field(s64, delta)
+ ),
+ TP_fast_assign(
+ __entry->ec_sensor_num = ec_sensor_num;
+ __entry->ec_fifo_timestamp = ec_fifo_timestamp;
+ __entry->fifo_timestamp = fifo_timestamp;
+ __entry->current_timestamp = current_timestamp;
+ __entry->current_time = current_time;
+ __entry->delta = current_timestamp - current_time;
+ ),
+ TP_printk("ec_num: %4u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
+ __entry->ec_sensor_num,
+ __entry->ec_fifo_timestamp,
+ __entry->fifo_timestamp,
+ __entry->current_timestamp,
+ __entry->current_time,
+ __entry->delta
+ )
+);
+
+TRACE_EVENT(cros_ec_sensorhub_filter,
+ TP_PROTO(struct cros_ec_sensors_ts_filter_state *state, s64 dx, s64 dy),
+ TP_ARGS(state, dx, dy),
+ TP_STRUCT__entry(
+ __field(s64, dx)
+ __field(s64, dy)
+ __field(s64, median_m)
+ __field(s64, median_error)
+ __field(s64, history_len)
+ __field(s64, x)
+ __field(s64, y)
+ ),
+ TP_fast_assign(
+ __entry->dx = dx;
+ __entry->dy = dy;
+ __entry->median_m = state->median_m;
+ __entry->median_error = state->median_error;
+ __entry->history_len = state->history_len;
+ __entry->x = state->x_offset;
+ __entry->y = state->y_offset;
+ ),
+ TP_printk("dx: %12lld. dy: %12lld median_m: %12lld median_error: %12lld len: %lld x: %12lld y: %12lld",
+ __entry->dx,
+ __entry->dy,
+ __entry->median_m,
+ __entry->median_error,
+ __entry->history_len,
+ __entry->x,
+ __entry->y
+ )
+);
+
+
+#endif /* _CROS_EC_SENSORHUB_TRACE_H_ */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE cros_ec_sensorhub_trace
+
+#include <trace/define_trace.h>
--- a/drivers/platform/chrome/cros_ec_trace.h
+++ b/drivers/platform/chrome/cros_ec_trace.h
@@ -15,7 +15,6 @@
#include <linux/types.h>
#include <linux/platform_data/cros_ec_commands.h>
#include <linux/platform_data/cros_ec_proto.h>
-#include <linux/platform_data/cros_ec_sensorhub.h>
#include <linux/tracepoint.h>
@@ -71,100 +70,6 @@ TRACE_EVENT(cros_ec_request_done,
__entry->retval)
);
-TRACE_EVENT(cros_ec_sensorhub_timestamp,
- TP_PROTO(u32 ec_sample_timestamp, u32 ec_fifo_timestamp, s64 fifo_timestamp,
- s64 current_timestamp, s64 current_time),
- TP_ARGS(ec_sample_timestamp, ec_fifo_timestamp, fifo_timestamp, current_timestamp,
- current_time),
- TP_STRUCT__entry(
- __field(u32, ec_sample_timestamp)
- __field(u32, ec_fifo_timestamp)
- __field(s64, fifo_timestamp)
- __field(s64, current_timestamp)
- __field(s64, current_time)
- __field(s64, delta)
- ),
- TP_fast_assign(
- __entry->ec_sample_timestamp = ec_sample_timestamp;
- __entry->ec_fifo_timestamp = ec_fifo_timestamp;
- __entry->fifo_timestamp = fifo_timestamp;
- __entry->current_timestamp = current_timestamp;
- __entry->current_time = current_time;
- __entry->delta = current_timestamp - current_time;
- ),
- TP_printk("ec_ts: %9u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
- __entry->ec_sample_timestamp,
- __entry->ec_fifo_timestamp,
- __entry->fifo_timestamp,
- __entry->current_timestamp,
- __entry->current_time,
- __entry->delta
- )
-);
-
-TRACE_EVENT(cros_ec_sensorhub_data,
- TP_PROTO(u32 ec_sensor_num, u32 ec_fifo_timestamp, s64 fifo_timestamp,
- s64 current_timestamp, s64 current_time),
- TP_ARGS(ec_sensor_num, ec_fifo_timestamp, fifo_timestamp, current_timestamp, current_time),
- TP_STRUCT__entry(
- __field(u32, ec_sensor_num)
- __field(u32, ec_fifo_timestamp)
- __field(s64, fifo_timestamp)
- __field(s64, current_timestamp)
- __field(s64, current_time)
- __field(s64, delta)
- ),
- TP_fast_assign(
- __entry->ec_sensor_num = ec_sensor_num;
- __entry->ec_fifo_timestamp = ec_fifo_timestamp;
- __entry->fifo_timestamp = fifo_timestamp;
- __entry->current_timestamp = current_timestamp;
- __entry->current_time = current_time;
- __entry->delta = current_timestamp - current_time;
- ),
- TP_printk("ec_num: %4u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
- __entry->ec_sensor_num,
- __entry->ec_fifo_timestamp,
- __entry->fifo_timestamp,
- __entry->current_timestamp,
- __entry->current_time,
- __entry->delta
- )
-);
-
-TRACE_EVENT(cros_ec_sensorhub_filter,
- TP_PROTO(struct cros_ec_sensors_ts_filter_state *state, s64 dx, s64 dy),
- TP_ARGS(state, dx, dy),
- TP_STRUCT__entry(
- __field(s64, dx)
- __field(s64, dy)
- __field(s64, median_m)
- __field(s64, median_error)
- __field(s64, history_len)
- __field(s64, x)
- __field(s64, y)
- ),
- TP_fast_assign(
- __entry->dx = dx;
- __entry->dy = dy;
- __entry->median_m = state->median_m;
- __entry->median_error = state->median_error;
- __entry->history_len = state->history_len;
- __entry->x = state->x_offset;
- __entry->y = state->y_offset;
- ),
- TP_printk("dx: %12lld. dy: %12lld median_m: %12lld median_error: %12lld len: %lld x: %12lld y: %12lld",
- __entry->dx,
- __entry->dy,
- __entry->median_m,
- __entry->median_error,
- __entry->history_len,
- __entry->x,
- __entry->y
- )
-);
-
-
#endif /* _CROS_EC_TRACE_H_ */
/* this part must be outside header guard */
From: Chris Leech <[email protected]>
[ Upstream commit 841aee4d75f18fdfb53935080b03de0c65e9b92c ]
Put NVMe/TCP sockets in their own class to avoid some lockdep warnings.
Sockets created by nvme-tcp are not exposed to user-space, and will not
trigger certain code paths that the general socket API exposes.
Lockdep complains about a circular dependency between the socket and
filesystem locks, because setsockopt can trigger a page fault with a
socket lock held, but nvme-tcp sends requests on the socket while file
system locks are held.
======================================================
WARNING: possible circular locking dependency detected
5.15.0-rc3 #1 Not tainted
------------------------------------------------------
fio/1496 is trying to acquire lock:
(sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendpage+0x23/0x80
but task is already holding lock:
(&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs]
which lock already depends on the new lock.
other info that might help us debug this:
chain exists of:
sk_lock-AF_INET --> sb_internal --> &xfs_dir_ilock_class/5
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xfs_dir_ilock_class/5);
lock(sb_internal);
lock(&xfs_dir_ilock_class/5);
lock(sk_lock-AF_INET);
*** DEADLOCK ***
6 locks held by fio/1496:
#0: (sb_writers#13){.+.+}-{0:0}, at: path_openat+0x9fc/0xa20
#1: (&inode->i_sb->s_type->i_mutex_dir_key){++++}-{3:3}, at: path_openat+0x296/0xa20
#2: (sb_internal){.+.+}-{0:0}, at: xfs_trans_alloc_icreate+0x41/0xd0 [xfs]
#3: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs]
#4: (hctx->srcu){....}-{0:0}, at: hctx_lock+0x51/0xd0
#5: (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0x33e/0x380 [nvme_tcp]
This annotation lets lockdep analyze nvme-tcp controlled sockets
independently of what the user-space sockets API does.
Link: https://lore.kernel.org/linux-nvme/CAHj4cs9MDYLJ+q+2_GXUK9HxFizv2pxUryUR0toX974M040z7g@mail.gmail.com/
Signed-off-by: Chris Leech <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/tcp.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index ef65d24639c4..10882d3d554c 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -30,6 +30,44 @@ static int so_priority;
module_param(so_priority, int, 0644);
MODULE_PARM_DESC(so_priority, "nvme tcp socket optimize priority");
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+/* lockdep can detect a circular dependency of the form
+ * sk_lock -> mmap_lock (page fault) -> fs locks -> sk_lock
+ * because dependencies are tracked for both nvme-tcp and user contexts. Using
+ * a separate class prevents lockdep from conflating nvme-tcp socket use with
+ * user-space socket API use.
+ */
+static struct lock_class_key nvme_tcp_sk_key[2];
+static struct lock_class_key nvme_tcp_slock_key[2];
+
+static void nvme_tcp_reclassify_socket(struct socket *sock)
+{
+ struct sock *sk = sock->sk;
+
+ if (WARN_ON_ONCE(!sock_allow_reclassification(sk)))
+ return;
+
+ switch (sk->sk_family) {
+ case AF_INET:
+ sock_lock_init_class_and_name(sk, "slock-AF_INET-NVME",
+ &nvme_tcp_slock_key[0],
+ "sk_lock-AF_INET-NVME",
+ &nvme_tcp_sk_key[0]);
+ break;
+ case AF_INET6:
+ sock_lock_init_class_and_name(sk, "slock-AF_INET6-NVME",
+ &nvme_tcp_slock_key[1],
+ "sk_lock-AF_INET6-NVME",
+ &nvme_tcp_sk_key[1]);
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ }
+}
+#else
+static void nvme_tcp_reclassify_socket(struct socket *sock) { }
+#endif
+
enum nvme_tcp_send_state {
NVME_TCP_SEND_CMD_PDU = 0,
NVME_TCP_SEND_H2C_PDU,
@@ -1436,6 +1474,8 @@ static int nvme_tcp_alloc_queue(struct nvme_ctrl *nctrl,
goto err_destroy_mutex;
}
+ nvme_tcp_reclassify_socket(queue->sock);
+
/* Single syn retry */
tcp_sock_set_syncnt(queue->sock->sk, 1);
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit ed7c9fef11931fc5d32a83d68017ff390bf5c280 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 5f9a50c3e55e ("ASoC: Davinci: McBSP: add device tree support for McBSP")
Signed-off-by: Jiasheng Jiang <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/ti/davinci-i2s.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/ti/davinci-i2s.c b/sound/soc/ti/davinci-i2s.c
index 6dca51862dd7..0363a088d2e0 100644
--- a/sound/soc/ti/davinci-i2s.c
+++ b/sound/soc/ti/davinci-i2s.c
@@ -708,7 +708,9 @@ static int davinci_i2s_probe(struct platform_device *pdev)
dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk))
return -ENODEV;
- clk_enable(dev->clk);
+ ret = clk_enable(dev->clk);
+ if (ret)
+ goto err_put_clk;
dev->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, dev);
@@ -730,6 +732,7 @@ static int davinci_i2s_probe(struct platform_device *pdev)
snd_soc_unregister_component(&pdev->dev);
err_release_clk:
clk_disable(dev->clk);
+err_put_clk:
clk_put(dev->clk);
return ret;
}
--
2.34.1
From: Po Liu <[email protected]>
[ Upstream commit b3a723dbc94a6e38f67669d03b521edd766ad895 ]
To replace the dma_map_single() stream DMA mapping with DMA coherent
method dma_alloc_coherent() which is more simple.
dma_map_single() found by Tim Gardner not proper. Suggested by Claudiu
Manoil and Jakub Kicinski to use dma_alloc_coherent(). Discussion at:
https://lore.kernel.org/netdev/AM9PR04MB8397F300DECD3C44D2EBD07796BD9@AM9PR04MB8397.eurprd04.prod.outlook.com/t/
Fixes: 888ae5a3952ba ("net: enetc: add tc flower psfp offload driver")
cc: Claudiu Manoil <[email protected]>
Reported-by: Tim Gardner <[email protected]>
Signed-off-by: Po Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/freescale/enetc/enetc_qos.c | 128 +++++++++---------
1 file changed, 64 insertions(+), 64 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
index 0536d2c76fbc..d779dde522c8 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
@@ -45,6 +45,7 @@ void enetc_sched_speed_set(struct enetc_ndev_priv *priv, int speed)
| pspeed);
}
+#define ENETC_QOS_ALIGN 64
static int enetc_setup_taprio(struct net_device *ndev,
struct tc_taprio_qopt_offload *admin_conf)
{
@@ -52,10 +53,11 @@ static int enetc_setup_taprio(struct net_device *ndev,
struct enetc_cbd cbd = {.cmd = 0};
struct tgs_gcl_conf *gcl_config;
struct tgs_gcl_data *gcl_data;
+ dma_addr_t dma, dma_align;
struct gce *gce;
- dma_addr_t dma;
u16 data_size;
u16 gcl_len;
+ void *tmp;
u32 tge;
int err;
int i;
@@ -82,9 +84,16 @@ static int enetc_setup_taprio(struct net_device *ndev,
gcl_config = &cbd.gcl_conf;
data_size = struct_size(gcl_data, entry, gcl_len);
- gcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
- if (!gcl_data)
+ tmp = dma_alloc_coherent(&priv->si->pdev->dev,
+ data_size + ENETC_QOS_ALIGN,
+ &dma, GFP_KERNEL);
+ if (!tmp) {
+ dev_err(&priv->si->pdev->dev,
+ "DMA mapping of taprio gate list failed!\n");
return -ENOMEM;
+ }
+ dma_align = ALIGN(dma, ENETC_QOS_ALIGN);
+ gcl_data = (struct tgs_gcl_data *)PTR_ALIGN(tmp, ENETC_QOS_ALIGN);
gce = (struct gce *)(gcl_data + 1);
@@ -110,16 +119,8 @@ static int enetc_setup_taprio(struct net_device *ndev,
cbd.length = cpu_to_le16(data_size);
cbd.status_flags = 0;
- dma = dma_map_single(&priv->si->pdev->dev, gcl_data,
- data_size, DMA_TO_DEVICE);
- if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
- netdev_err(priv->si->ndev, "DMA mapping failed!\n");
- kfree(gcl_data);
- return -ENOMEM;
- }
-
- cbd.addr[0] = cpu_to_le32(lower_32_bits(dma));
- cbd.addr[1] = cpu_to_le32(upper_32_bits(dma));
+ cbd.addr[0] = cpu_to_le32(lower_32_bits(dma_align));
+ cbd.addr[1] = cpu_to_le32(upper_32_bits(dma_align));
cbd.cls = BDCR_CMD_PORT_GCL;
cbd.status_flags = 0;
@@ -132,8 +133,8 @@ static int enetc_setup_taprio(struct net_device *ndev,
ENETC_QBV_PTGCR_OFFSET,
tge & (~ENETC_QBV_TGE));
- dma_unmap_single(&priv->si->pdev->dev, dma, data_size, DMA_TO_DEVICE);
- kfree(gcl_data);
+ dma_free_coherent(&priv->si->pdev->dev, data_size + ENETC_QOS_ALIGN,
+ tmp, dma);
return err;
}
@@ -463,8 +464,9 @@ static int enetc_streamid_hw_set(struct enetc_ndev_priv *priv,
struct enetc_cbd cbd = {.cmd = 0};
struct streamid_data *si_data;
struct streamid_conf *si_conf;
+ dma_addr_t dma, dma_align;
u16 data_size;
- dma_addr_t dma;
+ void *tmp;
int port;
int err;
@@ -485,21 +487,20 @@ static int enetc_streamid_hw_set(struct enetc_ndev_priv *priv,
cbd.status_flags = 0;
data_size = sizeof(struct streamid_data);
- si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
- if (!si_data)
+ tmp = dma_alloc_coherent(&priv->si->pdev->dev,
+ data_size + ENETC_QOS_ALIGN,
+ &dma, GFP_KERNEL);
+ if (!tmp) {
+ dev_err(&priv->si->pdev->dev,
+ "DMA mapping of stream identify failed!\n");
return -ENOMEM;
- cbd.length = cpu_to_le16(data_size);
-
- dma = dma_map_single(&priv->si->pdev->dev, si_data,
- data_size, DMA_FROM_DEVICE);
- if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
- netdev_err(priv->si->ndev, "DMA mapping failed!\n");
- err = -ENOMEM;
- goto out;
}
+ dma_align = ALIGN(dma, ENETC_QOS_ALIGN);
+ si_data = (struct streamid_data *)PTR_ALIGN(tmp, ENETC_QOS_ALIGN);
- cbd.addr[0] = cpu_to_le32(lower_32_bits(dma));
- cbd.addr[1] = cpu_to_le32(upper_32_bits(dma));
+ cbd.length = cpu_to_le16(data_size);
+ cbd.addr[0] = cpu_to_le32(lower_32_bits(dma_align));
+ cbd.addr[1] = cpu_to_le32(upper_32_bits(dma_align));
eth_broadcast_addr(si_data->dmac);
si_data->vid_vidm_tg = (ENETC_CBDR_SID_VID_MASK
+ ((0x3 << 14) | ENETC_CBDR_SID_VIDM));
@@ -539,8 +540,8 @@ static int enetc_streamid_hw_set(struct enetc_ndev_priv *priv,
cbd.length = cpu_to_le16(data_size);
- cbd.addr[0] = cpu_to_le32(lower_32_bits(dma));
- cbd.addr[1] = cpu_to_le32(upper_32_bits(dma));
+ cbd.addr[0] = cpu_to_le32(lower_32_bits(dma_align));
+ cbd.addr[1] = cpu_to_le32(upper_32_bits(dma_align));
/* VIDM default to be 1.
* VID Match. If set (b1) then the VID must match, otherwise
@@ -561,10 +562,8 @@ static int enetc_streamid_hw_set(struct enetc_ndev_priv *priv,
err = enetc_send_cmd(priv->si, &cbd);
out:
- if (!dma_mapping_error(&priv->si->pdev->dev, dma))
- dma_unmap_single(&priv->si->pdev->dev, dma, data_size, DMA_FROM_DEVICE);
-
- kfree(si_data);
+ dma_free_coherent(&priv->si->pdev->dev, data_size + ENETC_QOS_ALIGN,
+ tmp, dma);
return err;
}
@@ -633,8 +632,9 @@ static int enetc_streamcounter_hw_get(struct enetc_ndev_priv *priv,
{
struct enetc_cbd cbd = { .cmd = 2 };
struct sfi_counter_data *data_buf;
- dma_addr_t dma;
+ dma_addr_t dma, dma_align;
u16 data_size;
+ void *tmp;
int err;
cbd.index = cpu_to_le16((u16)index);
@@ -643,19 +643,19 @@ static int enetc_streamcounter_hw_get(struct enetc_ndev_priv *priv,
cbd.status_flags = 0;
data_size = sizeof(struct sfi_counter_data);
- data_buf = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
- if (!data_buf)
+ tmp = dma_alloc_coherent(&priv->si->pdev->dev,
+ data_size + ENETC_QOS_ALIGN,
+ &dma, GFP_KERNEL);
+ if (!tmp) {
+ dev_err(&priv->si->pdev->dev,
+ "DMA mapping of stream counter failed!\n");
return -ENOMEM;
-
- dma = dma_map_single(&priv->si->pdev->dev, data_buf,
- data_size, DMA_FROM_DEVICE);
- if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
- netdev_err(priv->si->ndev, "DMA mapping failed!\n");
- err = -ENOMEM;
- goto exit;
}
- cbd.addr[0] = cpu_to_le32(lower_32_bits(dma));
- cbd.addr[1] = cpu_to_le32(upper_32_bits(dma));
+ dma_align = ALIGN(dma, ENETC_QOS_ALIGN);
+ data_buf = (struct sfi_counter_data *)PTR_ALIGN(tmp, ENETC_QOS_ALIGN);
+
+ cbd.addr[0] = cpu_to_le32(lower_32_bits(dma_align));
+ cbd.addr[1] = cpu_to_le32(upper_32_bits(dma_align));
cbd.length = cpu_to_le16(data_size);
@@ -684,7 +684,9 @@ static int enetc_streamcounter_hw_get(struct enetc_ndev_priv *priv,
data_buf->flow_meter_dropl;
exit:
- kfree(data_buf);
+ dma_free_coherent(&priv->si->pdev->dev, data_size + ENETC_QOS_ALIGN,
+ tmp, dma);
+
return err;
}
@@ -723,9 +725,10 @@ static int enetc_streamgate_hw_set(struct enetc_ndev_priv *priv,
struct sgcl_conf *sgcl_config;
struct sgcl_data *sgcl_data;
struct sgce *sgce;
- dma_addr_t dma;
+ dma_addr_t dma, dma_align;
u16 data_size;
int err, i;
+ void *tmp;
u64 now;
cbd.index = cpu_to_le16(sgi->index);
@@ -772,24 +775,20 @@ static int enetc_streamgate_hw_set(struct enetc_ndev_priv *priv,
sgcl_config->acl_len = (sgi->num_entries - 1) & 0x3;
data_size = struct_size(sgcl_data, sgcl, sgi->num_entries);
-
- sgcl_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
- if (!sgcl_data)
- return -ENOMEM;
-
- cbd.length = cpu_to_le16(data_size);
-
- dma = dma_map_single(&priv->si->pdev->dev,
- sgcl_data, data_size,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&priv->si->pdev->dev, dma)) {
- netdev_err(priv->si->ndev, "DMA mapping failed!\n");
- kfree(sgcl_data);
+ tmp = dma_alloc_coherent(&priv->si->pdev->dev,
+ data_size + ENETC_QOS_ALIGN,
+ &dma, GFP_KERNEL);
+ if (!tmp) {
+ dev_err(&priv->si->pdev->dev,
+ "DMA mapping of stream counter failed!\n");
return -ENOMEM;
}
+ dma_align = ALIGN(dma, ENETC_QOS_ALIGN);
+ sgcl_data = (struct sgcl_data *)PTR_ALIGN(tmp, ENETC_QOS_ALIGN);
- cbd.addr[0] = cpu_to_le32(lower_32_bits(dma));
- cbd.addr[1] = cpu_to_le32(upper_32_bits(dma));
+ cbd.length = cpu_to_le16(data_size);
+ cbd.addr[0] = cpu_to_le32(lower_32_bits(dma_align));
+ cbd.addr[1] = cpu_to_le32(upper_32_bits(dma_align));
sgce = &sgcl_data->sgcl[0];
@@ -844,7 +843,8 @@ static int enetc_streamgate_hw_set(struct enetc_ndev_priv *priv,
err = enetc_send_cmd(priv->si, &cbd);
exit:
- kfree(sgcl_data);
+ dma_free_coherent(&priv->si->pdev->dev, data_size + ENETC_QOS_ALIGN,
+ tmp, dma);
return err;
}
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 19bce7ce0a593c7024030a0cda9e23facea3c93d ]
For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.
Change the type to u32, which matches the return type of
pinconf_to_config_argument().
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 5bdf8b7acd23..bcf359256ed4 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -184,8 +184,7 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
}
static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
- enum pin_config_param param,
- enum pin_config_param arg)
+ enum pin_config_param param, u32 arg)
{
struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
const struct mtk_pin_desc *desc;
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit b665eae7a788c5e2bc10f9ac3c0137aa0ad1fc97 ]
If an invalid option value is used with "printk.devkmsg=<value>",
it is silently ignored.
If a valid option value is used, it is honored but the wrong return
value (0) is used, indicating that the command line option had an
error and was not handled. This string is not added to init's
environment strings due to init/main.c::unknown_bootoption()
checking for a '.' in the boot option string and then considering
that string to be an "Unused module parameter".
Print a warning message if a bad option string is used.
Always return 1 from the __setup handler to indicate that the command
line option has been handled.
Fixes: 750afe7babd1 ("printk: add kernel parameter to control writes to /dev/kmsg")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Borislav Petkov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: John Ogness <[email protected]>
Reviewed-by: John Ogness <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/printk/printk.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 99221b016c68..7aeb13542ce7 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -146,8 +146,10 @@ static int __control_devkmsg(char *str)
static int __init control_devkmsg(char *str)
{
- if (__control_devkmsg(str) < 0)
+ if (__control_devkmsg(str) < 0) {
+ pr_warn("printk.devkmsg: bad option string '%s'\n", str);
return 1;
+ }
/*
* Set sysctl string accordingly:
@@ -166,7 +168,7 @@ static int __init control_devkmsg(char *str)
*/
devkmsg_log |= DEVKMSG_LOG_MASK_LOCK;
- return 0;
+ return 1;
}
__setup("printk.devkmsg=", control_devkmsg);
--
2.34.1
From: Ido Schimmel <[email protected]>
[ Upstream commit b50d3b46f84282d795ae3076111acb75ae1031f3 ]
The purpose of the last test case is to test VXLAN encapsulation and
decapsulation when the underlay lookup takes place in a non-default VRF.
This is achieved by enslaving the physical device of the tunnel to a
VRF.
The binding of the VXLAN UDP socket to the VRF happens when the VXLAN
device itself is opened, not when its physical device is opened. This
was also mentioned in the cited commit ("tests that moving the underlay
from a VRF to another works when down/up the VXLAN interface"), but the
test did something else.
Fix it by reopening the VXLAN device instead of its physical device.
Before:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
After:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Fixes: 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/test_vxlan_under_vrf.sh | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/test_vxlan_under_vrf.sh b/tools/testing/selftests/net/test_vxlan_under_vrf.sh
index 534c8b7699ab..6fadc8e2f116 100755
--- a/tools/testing/selftests/net/test_vxlan_under_vrf.sh
+++ b/tools/testing/selftests/net/test_vxlan_under_vrf.sh
@@ -118,11 +118,11 @@ echo "[ OK ]"
# Move the underlay to a non-default VRF
ip -netns hv-1 link set veth0 vrf vrf-underlay
-ip -netns hv-1 link set veth0 down
-ip -netns hv-1 link set veth0 up
+ip -netns hv-1 link set vxlan0 down
+ip -netns hv-1 link set vxlan0 up
ip -netns hv-2 link set veth0 vrf vrf-underlay
-ip -netns hv-2 link set veth0 down
-ip -netns hv-2 link set veth0 up
+ip -netns hv-2 link set vxlan0 down
+ip -netns hv-2 link set vxlan0 up
echo -n "Check VM connectivity through VXLAN (underlay in a VRF) "
ip netns exec vm-1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false)
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit f2aad54703dbe630f9d8b235eb58e8c8cc78f37d ]
When "driver_async_probe=nulltty" is used on the kernel boot command line,
it causes an Unknown parameter message and the string is added to init's
environment strings, polluting them.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6
driver_async_probe=nulltty", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
driver_async_probe=nulltty
Change the return value of the __setup function to 1 to indicate
that the __setup option has been handled.
Link: lore.kernel.org/r/[email protected]
Fixes: 1ea61b68d0f8 ("async: Add cmdline option to specify drivers to be async probed")
Cc: Feng Tang <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Reviewed-by: Feng Tang <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/dd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 6b6630693201..64ce42b6c6b6 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -809,7 +809,7 @@ static int __init save_async_options(char *buf)
pr_warn("Too long list of driver names for 'driver_async_probe'!\n");
strlcpy(async_probe_drv_names, buf, ASYNC_DRV_NAMES_MAX_LEN);
- return 0;
+ return 1;
}
__setup("driver_async_probe=", save_async_options);
--
2.34.1
From: Sungup Moon <[email protected]>
commit 5974ea7ce0f9a5987fc8cf5e08ad6e3e70bb542e upstream.
A NVMe subsystem with multiple controller can have private namespaces
that use the same NSID under some conditions:
"If Namespace Management, ANA Reporting, or NVM Sets are supported, the
NSIDs shall be unique within the NVM subsystem. If the Namespace
Management, ANA Reporting, and NVM Sets are not supported, then NSIDs:
a) for shared namespace shall be unique; and
b) for private namespace are not required to be unique."
Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec.
Make sure this specific setup is supported in Linux.
Fixes: 9ad1927a3bc2 ("nvme: always search for namespace head")
Signed-off-by: Sungup Moon <[email protected]>
[hch: refactored and fixed the controller vs subsystem based naming
conflict]
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/core.c | 15 ++++++++++-----
drivers/nvme/host/multipath.c | 7 ++++---
drivers/nvme/host/nvme.h | 19 +++++++++++++++++++
include/linux/nvme.h | 1 +
4 files changed, 34 insertions(+), 8 deletions(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3510,15 +3510,20 @@ static const struct attribute_group *nvm
NULL,
};
-static struct nvme_ns_head *nvme_find_ns_head(struct nvme_subsystem *subsys,
+static struct nvme_ns_head *nvme_find_ns_head(struct nvme_ctrl *ctrl,
unsigned nsid)
{
struct nvme_ns_head *h;
- lockdep_assert_held(&subsys->lock);
+ lockdep_assert_held(&ctrl->subsys->lock);
- list_for_each_entry(h, &subsys->nsheads, entry) {
- if (h->ns_id != nsid)
+ list_for_each_entry(h, &ctrl->subsys->nsheads, entry) {
+ /*
+ * Private namespaces can share NSIDs under some conditions.
+ * In that case we can't use the same ns_head for namespaces
+ * with the same NSID.
+ */
+ if (h->ns_id != nsid || !nvme_is_unique_nsid(ctrl, h))
continue;
if (!list_empty(&h->list) && nvme_tryget_ns_head(h))
return h;
@@ -3686,7 +3691,7 @@ static int nvme_init_ns_head(struct nvme
int ret = 0;
mutex_lock(&ctrl->subsys->lock);
- head = nvme_find_ns_head(ctrl->subsys, nsid);
+ head = nvme_find_ns_head(ctrl, nsid);
if (!head) {
head = nvme_alloc_ns_head(ctrl, nsid, ids);
if (IS_ERR(head)) {
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -462,10 +462,11 @@ int nvme_mpath_alloc_disk(struct nvme_ct
/*
* Add a multipath node if the subsystems supports multiple controllers.
- * We also do this for private namespaces as the namespace sharing data could
- * change after a rescan.
+ * We also do this for private namespaces as the namespace sharing flag
+ * could change after a rescan.
*/
- if (!(ctrl->subsys->cmic & NVME_CTRL_CMIC_MULTI_CTRL) || !multipath)
+ if (!(ctrl->subsys->cmic & NVME_CTRL_CMIC_MULTI_CTRL) ||
+ !nvme_is_unique_nsid(ctrl, head) || !multipath)
return 0;
head->disk = blk_alloc_disk(ctrl->numa_node);
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -693,6 +693,25 @@ static inline bool nvme_check_ready(stru
return true;
return __nvme_check_ready(ctrl, rq, queue_live);
}
+
+/*
+ * NSID shall be unique for all shared namespaces, or if at least one of the
+ * following conditions is met:
+ * 1. Namespace Management is supported by the controller
+ * 2. ANA is supported by the controller
+ * 3. NVM Set are supported by the controller
+ *
+ * In other case, private namespace are not required to report a unique NSID.
+ */
+static inline bool nvme_is_unique_nsid(struct nvme_ctrl *ctrl,
+ struct nvme_ns_head *head)
+{
+ return head->shared ||
+ (ctrl->oacs & NVME_CTRL_OACS_NS_MNGT_SUPP) ||
+ (ctrl->subsys->cmic & NVME_CTRL_CMIC_ANA) ||
+ (ctrl->ctratt & NVME_CTRL_CTRATT_NVM_SETS);
+}
+
int nvme_submit_sync_cmd(struct request_queue *q, struct nvme_command *cmd,
void *buf, unsigned bufflen);
int __nvme_submit_sync_cmd(struct request_queue *q, struct nvme_command *cmd,
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -322,6 +322,7 @@ enum {
NVME_CTRL_ONCS_TIMESTAMP = 1 << 6,
NVME_CTRL_VWC_PRESENT = 1 << 0,
NVME_CTRL_OACS_SEC_SUPP = 1 << 0,
+ NVME_CTRL_OACS_NS_MNGT_SUPP = 1 << 3,
NVME_CTRL_OACS_DIRECTIVES = 1 << 5,
NVME_CTRL_OACS_DBBUF_SUPP = 1 << 8,
NVME_CTRL_LPA_CMD_EFFECTS_LOG = 1 << 1,
From: Anders Roxell <[email protected]>
commit 8667d0d64dd1f84fd41b5897fd87fa9113ae05e3 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: [email protected]
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Segher Boessenkool <[email protected]>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/io.h | 40 ++++++++++++++++++++++++++++-------
arch/powerpc/include/asm/uaccess.h | 3 ++
arch/powerpc/platforms/powernv/rng.c | 6 ++++-
3 files changed, 40 insertions(+), 9 deletions(-)
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -359,25 +359,37 @@ static inline void __raw_writeq_be(unsig
*/
static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr)
{
- __asm__ __volatile__("stbcix %0,0,%1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ stbcix %0,0,%1; \
+ .machine pop;"
: : "r" (val), "r" (paddr) : "memory");
}
static inline void __raw_rm_writew(u16 val, volatile void __iomem *paddr)
{
- __asm__ __volatile__("sthcix %0,0,%1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ sthcix %0,0,%1; \
+ .machine pop;"
: : "r" (val), "r" (paddr) : "memory");
}
static inline void __raw_rm_writel(u32 val, volatile void __iomem *paddr)
{
- __asm__ __volatile__("stwcix %0,0,%1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ stwcix %0,0,%1; \
+ .machine pop;"
: : "r" (val), "r" (paddr) : "memory");
}
static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
{
- __asm__ __volatile__("stdcix %0,0,%1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ stdcix %0,0,%1; \
+ .machine pop;"
: : "r" (val), "r" (paddr) : "memory");
}
@@ -389,7 +401,10 @@ static inline void __raw_rm_writeq_be(u6
static inline u8 __raw_rm_readb(volatile void __iomem *paddr)
{
u8 ret;
- __asm__ __volatile__("lbzcix %0,0, %1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ lbzcix %0,0, %1; \
+ .machine pop;"
: "=r" (ret) : "r" (paddr) : "memory");
return ret;
}
@@ -397,7 +412,10 @@ static inline u8 __raw_rm_readb(volatile
static inline u16 __raw_rm_readw(volatile void __iomem *paddr)
{
u16 ret;
- __asm__ __volatile__("lhzcix %0,0, %1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ lhzcix %0,0, %1; \
+ .machine pop;"
: "=r" (ret) : "r" (paddr) : "memory");
return ret;
}
@@ -405,7 +423,10 @@ static inline u16 __raw_rm_readw(volatil
static inline u32 __raw_rm_readl(volatile void __iomem *paddr)
{
u32 ret;
- __asm__ __volatile__("lwzcix %0,0, %1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ lwzcix %0,0, %1; \
+ .machine pop;"
: "=r" (ret) : "r" (paddr) : "memory");
return ret;
}
@@ -413,7 +434,10 @@ static inline u32 __raw_rm_readl(volatil
static inline u64 __raw_rm_readq(volatile void __iomem *paddr)
{
u64 ret;
- __asm__ __volatile__("ldcix %0,0, %1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ ldcix %0,0, %1; \
+ .machine pop;"
: "=r" (ret) : "r" (paddr) : "memory");
return ret;
}
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -125,8 +125,11 @@ do { \
*/
#define __get_user_atomic_128_aligned(kaddr, uaddr, err) \
__asm__ __volatile__( \
+ ".machine push\n" \
+ ".machine altivec\n" \
"1: lvx 0,0,%1 # get user\n" \
" stvx 0,0,%2 # put kernel\n" \
+ ".machine pop\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3: li %0,%3\n" \
--- a/arch/powerpc/platforms/powernv/rng.c
+++ b/arch/powerpc/platforms/powernv/rng.c
@@ -43,7 +43,11 @@ static unsigned long rng_whiten(struct p
unsigned long parity;
/* Calculate the parity of the value */
- asm ("popcntd %0,%1" : "=r" (parity) : "r" (val));
+ asm (".machine push; \
+ .machine power7; \
+ popcntd %0,%1; \
+ .machine pop;"
+ : "=r" (parity) : "r" (val));
/* xor our value with the previous mask */
val ^= rng->mask;
From: Horatiu Vultur <[email protected]>
[ Upstream commit 0b90315af7602aeb40fe7b6255ab212a19dbd78e ]
On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.
Signed-off-by: Horatiu Vultur <[email protected]>
Reviewed-by: Steen Hegelund <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-microchip-sgpio.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 072bccdea2a5..78765faa245a 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -17,6 +17,7 @@
#include <linux/pinctrl/pinmux.h>
#include <linux/platform_device.h>
#include <linux/property.h>
+#include <linux/reset.h>
#include "core.h"
#include "pinconf.h"
@@ -803,6 +804,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
int div_clock = 0, ret, port, i, nbanks;
struct device *dev = &pdev->dev;
struct fwnode_handle *fwnode;
+ struct reset_control *reset;
struct sgpio_priv *priv;
struct clk *clk;
u32 val;
@@ -813,6 +815,11 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
priv->dev = dev;
+ reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch");
+ if (IS_ERR(reset))
+ return dev_err_probe(dev, PTR_ERR(reset), "Failed to get reset\n");
+ reset_control_reset(reset);
+
clk = devm_clk_get(dev, NULL);
if (IS_ERR(clk))
return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n");
--
2.34.1
From: Ard Biesheuvel <[email protected]>
[ Upstream commit d11967870815b5ab89843980e35aab616c97c463 ]
Tweak the ftrace return paths to avoid redundant loads of SP, as well as
unnecessary clobbering of IP.
This also fixes the inconsistency of using MOV to perform a function
return, which is sub-optimal on recent micro-architectures but more
importantly, does not perform an interworking return, unlike compiler
generated function returns in Thumb2 builds.
Let's fix this by popping PC from the stack like most ordinary code
does.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/entry-ftrace.S | 51 +++++++++++++++-------------------
1 file changed, 22 insertions(+), 29 deletions(-)
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index f4886fb6e9ba..f33c171e3090 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -22,10 +22,7 @@
* mcount can be thought of as a function called in the middle of a subroutine
* call. As such, it needs to be transparent for both the caller and the
* callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered. (In the __gnu_mcount_nc implementation, we
- * clobber the ip register. This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
*
* When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
* instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
@@ -70,26 +67,25 @@
.macro __ftrace_regs_caller
- sub sp, sp, #8 @ space for PC and CPSR OLD_R0,
+ str lr, [sp, #-8]! @ store LR as PC and make space for CPSR/OLD_R0,
@ OLD_R0 will overwrite previous LR
- add ip, sp, #12 @ move in IP the value of SP as it was
- @ before the push {lr} of the mcount mechanism
+ ldr lr, [sp, #8] @ get previous LR
- str lr, [sp, #0] @ store LR instead of PC
+ str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
- ldr lr, [sp, #8] @ get previous LR
+ str lr, [sp, #-4]! @ store previous LR as LR
- str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
+ add lr, sp, #16 @ move in LR the value of SP as it was
+ @ before the push {lr} of the mcount mechanism
- stmdb sp!, {ip, lr}
- stmdb sp!, {r0-r11, lr}
+ push {r0-r11, ip, lr}
@ stack content at this point:
@ 0 4 48 52 56 60 64 68 72
- @ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+ @ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
- mov r3, sp @ struct pt_regs*
+ mov r3, sp @ struct pt_regs*
ldr r2, =function_trace_op
ldr r2, [r2] @ pointer to the current
@@ -112,11 +108,9 @@ ftrace_graph_regs_call:
#endif
@ pop saved regs
- ldmia sp!, {r0-r12} @ restore r0 through r12
- ldr ip, [sp, #8] @ restore PC
- ldr lr, [sp, #4] @ restore LR
- ldr sp, [sp, #0] @ restore SP
- mov pc, ip @ return
+ pop {r0-r11, ip, lr} @ restore r0 through r12
+ ldr lr, [sp], #4 @ restore LR
+ ldr pc, [sp], #12
.endm
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -132,11 +126,9 @@ ftrace_graph_regs_call:
bl prepare_ftrace_return
@ pop registers saved in ftrace_regs_caller
- ldmia sp!, {r0-r12} @ restore r0 through r12
- ldr ip, [sp, #8] @ restore PC
- ldr lr, [sp, #4] @ restore LR
- ldr sp, [sp, #0] @ restore SP
- mov pc, ip @ return
+ pop {r0-r11, ip, lr} @ restore r0 through r12
+ ldr lr, [sp], #4 @ restore LR
+ ldr pc, [sp], #12
.endm
#endif
@@ -202,16 +194,17 @@ ftrace_graph_call\suffix:
.endm
.macro mcount_exit
- ldmia sp!, {r0-r3, ip, lr}
- ret ip
+ ldmia sp!, {r0-r3}
+ ldr lr, [sp, #4]
+ ldr pc, [sp], #8
.endm
ENTRY(__gnu_mcount_nc)
UNWIND(.fnstart)
#ifdef CONFIG_DYNAMIC_FTRACE
- mov ip, lr
- ldmia sp!, {lr}
- ret ip
+ push {lr}
+ ldr lr, [sp, #4]
+ ldr pc, [sp], #8
#else
__mcount
#endif
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit 1fbdaa13386804a31eefd3db3c5fe00e80ce9bc3 ]
To not dereference bi->xdp each time in ixgbe_construct_skb_zc(),
pass bi->xdp as an argument instead of bi. We can also call
xsk_buff_free() outside of the function as well as assign bi->xdp
to NULL, which seems to make it closer to its name.
Suggested-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Tested-by: Sandeep Penigalapati <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
index e3bf024717ed..7c17932a5e4e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
@@ -201,26 +201,24 @@ bool ixgbe_alloc_rx_buffers_zc(struct ixgbe_ring *rx_ring, u16 count)
}
static struct sk_buff *ixgbe_construct_skb_zc(struct ixgbe_ring *rx_ring,
- struct ixgbe_rx_buffer *bi)
+ const struct xdp_buff *xdp)
{
- unsigned int metasize = bi->xdp->data - bi->xdp->data_meta;
- unsigned int datasize = bi->xdp->data_end - bi->xdp->data;
+ unsigned int metasize = xdp->data - xdp->data_meta;
+ unsigned int datasize = xdp->data_end - xdp->data;
struct sk_buff *skb;
/* allocate a skb to store the frags */
skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
- bi->xdp->data_end - bi->xdp->data_hard_start,
+ xdp->data_end - xdp->data_hard_start,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
return NULL;
- skb_reserve(skb, bi->xdp->data - bi->xdp->data_hard_start);
- memcpy(__skb_put(skb, datasize), bi->xdp->data, datasize);
+ skb_reserve(skb, xdp->data - xdp->data_hard_start);
+ memcpy(__skb_put(skb, datasize), xdp->data, datasize);
if (metasize)
skb_metadata_set(skb, metasize);
- xsk_buff_free(bi->xdp);
- bi->xdp = NULL;
return skb;
}
@@ -311,12 +309,15 @@ int ixgbe_clean_rx_irq_zc(struct ixgbe_q_vector *q_vector,
}
/* XDP_PASS path */
- skb = ixgbe_construct_skb_zc(rx_ring, bi);
+ skb = ixgbe_construct_skb_zc(rx_ring, bi->xdp);
if (!skb) {
rx_ring->rx_stats.alloc_rx_buff_failed++;
break;
}
+ xsk_buff_free(bi->xdp);
+ bi->xdp = NULL;
+
cleaned_count++;
ixgbe_inc_ntc(rx_ring);
--
2.34.1
From: Meng Tang <[email protected]>
[ Upstream commit 54e1bf9f6177a3ffbd920474f4481a25361163aa ]
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Fixes: cab396d8b22c1 ("ASoC: amd: add ACP5x pcm dma driver ops")
Signed-off-by: Meng Tang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/amd/vangogh/acp5x-pcm-dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/amd/vangogh/acp5x-pcm-dma.c b/sound/soc/amd/vangogh/acp5x-pcm-dma.c
index f10de38976cb..6abcc2133a2c 100644
--- a/sound/soc/amd/vangogh/acp5x-pcm-dma.c
+++ b/sound/soc/amd/vangogh/acp5x-pcm-dma.c
@@ -281,7 +281,7 @@ static int acp5x_dma_hw_params(struct snd_soc_component *component,
return -EINVAL;
}
size = params_buffer_bytes(params);
- rtd->dma_addr = substream->dma_buffer.addr;
+ rtd->dma_addr = substream->runtime->dma_addr;
rtd->num_pages = (PAGE_ALIGN(size) >> PAGE_SHIFT);
config_acp5x_dma(rtd, substream->stream);
return 0;
--
2.34.1
From: Toke Høiland-Jørgensen <[email protected]>
[ Upstream commit 9c3de619e13ee6693ec5ac74f50b7aa89056a70e ]
When receiving netlink messages, libbpf was using a statically allocated
stack buffer of 4k bytes. This happened to work fine on systems with a 4k
page size, but on systems with larger page sizes it can lead to truncated
messages. The user-visible impact of this was that libbpf would insist no
XDP program was attached to some interfaces because that bit of the netlink
message got chopped off.
Fix this by switching to a dynamically allocated buffer; we borrow the
approach from iproute2 of using recvmsg() with MSG_PEEK|MSG_TRUNC to get
the actual size of the pending message before receiving it, adjusting the
buffer as necessary. While we're at it, also add retries on interrupted
system calls around the recvmsg() call.
v2:
- Move peek logic to libbpf_netlink_recv(), don't double free on ENOMEM.
Fixes: 8bbb77b7c7a2 ("libbpf: Add various netlink helpers")
Reported-by: Zhiqian Guan <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/netlink.c | 55 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 51 insertions(+), 4 deletions(-)
diff --git a/tools/lib/bpf/netlink.c b/tools/lib/bpf/netlink.c
index 39f25e09b51e..69b353d55dbf 100644
--- a/tools/lib/bpf/netlink.c
+++ b/tools/lib/bpf/netlink.c
@@ -87,29 +87,75 @@ enum {
NL_DONE,
};
+static int netlink_recvmsg(int sock, struct msghdr *mhdr, int flags)
+{
+ int len;
+
+ do {
+ len = recvmsg(sock, mhdr, flags);
+ } while (len < 0 && (errno == EINTR || errno == EAGAIN));
+
+ if (len < 0)
+ return -errno;
+ return len;
+}
+
+static int alloc_iov(struct iovec *iov, int len)
+{
+ void *nbuf;
+
+ nbuf = realloc(iov->iov_base, len);
+ if (!nbuf)
+ return -ENOMEM;
+
+ iov->iov_base = nbuf;
+ iov->iov_len = len;
+ return 0;
+}
+
static int libbpf_netlink_recv(int sock, __u32 nl_pid, int seq,
__dump_nlmsg_t _fn, libbpf_dump_nlmsg_t fn,
void *cookie)
{
+ struct iovec iov = {};
+ struct msghdr mhdr = {
+ .msg_iov = &iov,
+ .msg_iovlen = 1,
+ };
bool multipart = true;
struct nlmsgerr *err;
struct nlmsghdr *nh;
- char buf[4096];
int len, ret;
+ ret = alloc_iov(&iov, 4096);
+ if (ret)
+ goto done;
+
while (multipart) {
start:
multipart = false;
- len = recv(sock, buf, sizeof(buf), 0);
+ len = netlink_recvmsg(sock, &mhdr, MSG_PEEK | MSG_TRUNC);
+ if (len < 0) {
+ ret = len;
+ goto done;
+ }
+
+ if (len > iov.iov_len) {
+ ret = alloc_iov(&iov, len);
+ if (ret)
+ goto done;
+ }
+
+ len = netlink_recvmsg(sock, &mhdr, 0);
if (len < 0) {
- ret = -errno;
+ ret = len;
goto done;
}
if (len == 0)
break;
- for (nh = (struct nlmsghdr *)buf; NLMSG_OK(nh, len);
+ for (nh = (struct nlmsghdr *)iov.iov_base; NLMSG_OK(nh, len);
nh = NLMSG_NEXT(nh, len)) {
if (nh->nlmsg_pid != nl_pid) {
ret = -LIBBPF_ERRNO__WRNGPID;
@@ -151,6 +197,7 @@ static int libbpf_netlink_recv(int sock, __u32 nl_pid, int seq,
}
ret = 0;
done:
+ free(iov.iov_base);
return ret;
}
--
2.34.1
From: Hans Verkuil <[email protected]>
[ Upstream commit 25e94139218c0293b4375233c14f2256d7dcfaa8 ]
The VIDIOC_G_FBUF and related overlay ioctls no longer worked (-ENOTTY was
returned).
The root cause was the introduction of the caps field in ivtv-driver.h.
While loading the ivtvfb module would update the video_device device_caps
field with V4L2_CAP_VIDEO_OUTPUT_OVERLAY it would not update that caps
field, and that's what the overlay ioctls would look at.
It's a bad idea to keep information in two places, so drop the caps field
and only use vdev.device_caps.
Signed-off-by: Hans Verkuil <[email protected]>
Reported-by: Martin Dauskardt <[email protected]>
Fixes: 2161536516ed (media: media/pci: set device_caps in struct video_device)
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/ivtv/ivtv-driver.h | 1 -
drivers/media/pci/ivtv/ivtv-ioctl.c | 10 +++++-----
drivers/media/pci/ivtv/ivtv-streams.c | 11 ++++-------
3 files changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/media/pci/ivtv/ivtv-driver.h b/drivers/media/pci/ivtv/ivtv-driver.h
index 4cf92dee6527..ce3a7ca51736 100644
--- a/drivers/media/pci/ivtv/ivtv-driver.h
+++ b/drivers/media/pci/ivtv/ivtv-driver.h
@@ -330,7 +330,6 @@ struct ivtv_stream {
struct ivtv *itv; /* for ease of use */
const char *name; /* name of the stream */
int type; /* stream type */
- u32 caps; /* V4L2 capabilities */
struct v4l2_fh *fh; /* pointer to the streaming filehandle */
spinlock_t qlock; /* locks access to the queues */
diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c
index da19b2e95e6c..6d2d3348e321 100644
--- a/drivers/media/pci/ivtv/ivtv-ioctl.c
+++ b/drivers/media/pci/ivtv/ivtv-ioctl.c
@@ -438,7 +438,7 @@ static int ivtv_g_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_f
struct ivtv_stream *s = &itv->streams[fh2id(fh)->type];
struct v4l2_window *winfmt = &fmt->fmt.win;
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -EINVAL;
if (!itv->osd_video_pbase)
return -EINVAL;
@@ -549,7 +549,7 @@ static int ivtv_try_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2
u32 chromakey = fmt->fmt.win.chromakey;
u8 global_alpha = fmt->fmt.win.global_alpha;
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -EINVAL;
if (!itv->osd_video_pbase)
return -EINVAL;
@@ -1383,7 +1383,7 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb)
0,
};
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -ENOTTY;
if (!itv->osd_video_pbase)
return -ENOTTY;
@@ -1450,7 +1450,7 @@ static int ivtv_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffe
struct ivtv_stream *s = &itv->streams[fh2id(fh)->type];
struct yuv_playback_info *yi = &itv->yuv_info;
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -ENOTTY;
if (!itv->osd_video_pbase)
return -ENOTTY;
@@ -1470,7 +1470,7 @@ static int ivtv_overlay(struct file *file, void *fh, unsigned int on)
struct ivtv *itv = id->itv;
struct ivtv_stream *s = &itv->streams[fh2id(fh)->type];
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -ENOTTY;
if (!itv->osd_video_pbase)
return -ENOTTY;
diff --git a/drivers/media/pci/ivtv/ivtv-streams.c b/drivers/media/pci/ivtv/ivtv-streams.c
index f04ee84bab5f..f9de5d1605fe 100644
--- a/drivers/media/pci/ivtv/ivtv-streams.c
+++ b/drivers/media/pci/ivtv/ivtv-streams.c
@@ -176,7 +176,7 @@ static void ivtv_stream_init(struct ivtv *itv, int type)
s->itv = itv;
s->type = type;
s->name = ivtv_stream_info[type].name;
- s->caps = ivtv_stream_info[type].v4l2_caps;
+ s->vdev.device_caps = ivtv_stream_info[type].v4l2_caps;
if (ivtv_stream_info[type].pio)
s->dma = PCI_DMA_NONE;
@@ -299,12 +299,9 @@ static int ivtv_reg_dev(struct ivtv *itv, int type)
if (s_mpg->vdev.v4l2_dev)
num = s_mpg->vdev.num + ivtv_stream_info[type].num_offset;
}
- s->vdev.device_caps = s->caps;
- if (itv->osd_video_pbase) {
- itv->streams[IVTV_DEC_STREAM_TYPE_YUV].vdev.device_caps |=
- V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
- itv->streams[IVTV_DEC_STREAM_TYPE_MPG].vdev.device_caps |=
- V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
+ if (itv->osd_video_pbase && (type == IVTV_DEC_STREAM_TYPE_YUV ||
+ type == IVTV_DEC_STREAM_TYPE_MPG)) {
+ s->vdev.device_caps |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
itv->v4l2_cap |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
}
video_set_drvdata(&s->vdev, s);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 9531a631379169d57756b2411178c6238655df88 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This is similar to commit 64b92de9603f
("ASoC: wcd9335: fix a leaked reference by adding missing of_node_put")
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wcd934x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index 654d847a050e..7b99318070cf 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -5888,6 +5888,7 @@ static int wcd934x_codec_parse_data(struct wcd934x_codec *wcd)
}
wcd->sidev = of_slim_get_device(wcd->sdev->ctrl, ifc_dev_np);
+ of_node_put(ifc_dev_np);
if (!wcd->sidev) {
dev_err(dev, "Unable to get SLIM Interface device\n");
return -EINVAL;
--
2.34.1
From: Tim Gardner <[email protected]>
[ Upstream commit 37a1a2e6eeeb101285cd34e12e48a881524701aa ]
Coverity complains of a possible buffer overflow. However,
given the 'static' scope of nvidia_setup_i2c_bus() it looks
like that can't happen after examiniing the call sites.
CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
1. fixed_size_dest: You might overrun the 48-character fixed-size string
chan->adapter.name by copying name without checking the length.
2. parameter_as_source: Note: This defect has an elevated risk because the
source argument is a parameter of the current function.
89 strcpy(chan->adapter.name, name);
Fix this warning by using strscpy() which will silence the warning and
prevent any future buffer overflows should the names used to identify the
channel become much longer.
Cc: Antonino Daplas <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/nvidia/nv_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/nvidia/nv_i2c.c b/drivers/video/fbdev/nvidia/nv_i2c.c
index d7994a173245..0b48965a6420 100644
--- a/drivers/video/fbdev/nvidia/nv_i2c.c
+++ b/drivers/video/fbdev/nvidia/nv_i2c.c
@@ -86,7 +86,7 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name,
{
int rc;
- strcpy(chan->adapter.name, name);
+ strscpy(chan->adapter.name, name, sizeof(chan->adapter.name));
chan->adapter.owner = THIS_MODULE;
chan->adapter.class = i2c_class;
chan->adapter.algo_data = &chan->algo;
--
2.34.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit 67ec6dd0b257bd81b4e9fcac89b29da72f6265e5 ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 90b9aacf912a ("serial: 8250_pci: add Intel Tangier support")
Fixes: f549e94effa1 ("serial: 8250_pci: add Intel Penwell ports")
Reported-by: Qing Wang <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Depends-on: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_mid.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index efa0515139f8..e6c1791609dd 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -73,6 +73,11 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
return 0;
}
+static void pnw_exit(struct mid8250 *mid)
+{
+ pci_dev_put(mid->dma_dev);
+}
+
static int tng_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
@@ -124,6 +129,11 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
return 0;
}
+static void tng_exit(struct mid8250 *mid)
+{
+ pci_dev_put(mid->dma_dev);
+}
+
static int dnv_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
@@ -330,9 +340,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_drvdata(pdev, mid);
return 0;
+
err:
- if (mid->board->exit)
- mid->board->exit(mid);
+ mid->board->exit(mid);
return ret;
}
@@ -342,8 +352,7 @@ static void mid8250_remove(struct pci_dev *pdev)
serial8250_unregister_port(mid->line);
- if (mid->board->exit)
- mid->board->exit(mid);
+ mid->board->exit(mid);
}
static const struct mid8250_board pnw_board = {
@@ -351,6 +360,7 @@ static const struct mid8250_board pnw_board = {
.freq = 50000000,
.base_baud = 115200,
.setup = pnw_setup,
+ .exit = pnw_exit,
};
static const struct mid8250_board tng_board = {
@@ -358,6 +368,7 @@ static const struct mid8250_board tng_board = {
.freq = 38400000,
.base_baud = 1843200,
.setup = tng_setup,
+ .exit = tng_exit,
};
static const struct mid8250_board dnv_board = {
--
2.34.1
From: Eric W. Biederman <[email protected]>
commit 95c5436a4883841588dae86fb0b9325f47ba5ad3 upstream.
Move the call of dump_vma_snapshot and kvfree(vma_meta) out of the
individual coredump routines into do_coredump itself. This makes
the code less error prone and easier to maintain.
Make the vma snapshot available to the coredump routines
in struct coredump_params. This makes it easier to
change and update what is captures in the vma snapshot
and will be needed for fixing fill_file_notes.
Reviewed-by: Jann Horn <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_elf.c | 20 +++++++-------------
fs/binfmt_elf_fdpic.c | 18 ++++++------------
fs/coredump.c | 41 +++++++++++++++++++++++------------------
include/linux/binfmts.h | 3 +++
include/linux/coredump.h | 3 ---
5 files changed, 39 insertions(+), 46 deletions(-)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -2168,8 +2168,7 @@ static void fill_extnum_info(struct elfh
static int elf_core_dump(struct coredump_params *cprm)
{
int has_dumped = 0;
- int vma_count, segs, i;
- size_t vma_data_size;
+ int segs, i;
struct elfhdr elf;
loff_t offset = 0, dataoff;
struct elf_note_info info = { };
@@ -2177,16 +2176,12 @@ static int elf_core_dump(struct coredump
struct elf_shdr *shdr4extnum = NULL;
Elf_Half e_phnum;
elf_addr_t e_shoff;
- struct core_vma_metadata *vma_meta;
-
- if (dump_vma_snapshot(cprm, &vma_count, &vma_meta, &vma_data_size))
- return 0;
/*
* The number of segs are recored into ELF header as 16bit value.
* Please check DEFAULT_MAX_MAP_COUNT definition when you modify here.
*/
- segs = vma_count + elf_core_extra_phdrs();
+ segs = cprm->vma_count + elf_core_extra_phdrs();
/* for notes section */
segs++;
@@ -2225,7 +2220,7 @@ static int elf_core_dump(struct coredump
dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
- offset += vma_data_size;
+ offset += cprm->vma_data_size;
offset += elf_core_extra_data_size();
e_shoff = offset;
@@ -2245,8 +2240,8 @@ static int elf_core_dump(struct coredump
goto end_coredump;
/* Write program headers for segments dump */
- for (i = 0; i < vma_count; i++) {
- struct core_vma_metadata *meta = vma_meta + i;
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *meta = cprm->vma_meta + i;
struct elf_phdr phdr;
phdr.p_type = PT_LOAD;
@@ -2283,8 +2278,8 @@ static int elf_core_dump(struct coredump
/* Align to page */
dump_skip_to(cprm, dataoff);
- for (i = 0; i < vma_count; i++) {
- struct core_vma_metadata *meta = vma_meta + i;
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *meta = cprm->vma_meta + i;
if (!dump_user_range(cprm, meta->start, meta->dump_size))
goto end_coredump;
@@ -2301,7 +2296,6 @@ static int elf_core_dump(struct coredump
end_coredump:
free_note_info(&info);
kfree(shdr4extnum);
- kvfree(vma_meta);
kfree(phdr4note);
return has_dumped;
}
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1465,7 +1465,7 @@ static bool elf_fdpic_dump_segments(stru
static int elf_fdpic_core_dump(struct coredump_params *cprm)
{
int has_dumped = 0;
- int vma_count, segs;
+ int segs;
int i;
struct elfhdr *elf = NULL;
loff_t offset = 0, dataoff;
@@ -1480,8 +1480,6 @@ static int elf_fdpic_core_dump(struct co
elf_addr_t e_shoff;
struct core_thread *ct;
struct elf_thread_status *tmp;
- struct core_vma_metadata *vma_meta = NULL;
- size_t vma_data_size;
/* alloc memory for large data structures: too large to be on stack */
elf = kmalloc(sizeof(*elf), GFP_KERNEL);
@@ -1491,9 +1489,6 @@ static int elf_fdpic_core_dump(struct co
if (!psinfo)
goto end_coredump;
- if (dump_vma_snapshot(cprm, &vma_count, &vma_meta, &vma_data_size))
- goto end_coredump;
-
for (ct = current->mm->core_state->dumper.next;
ct; ct = ct->next) {
tmp = elf_dump_thread_status(cprm->siginfo->si_signo,
@@ -1513,7 +1508,7 @@ static int elf_fdpic_core_dump(struct co
tmp->next = thread_list;
thread_list = tmp;
- segs = vma_count + elf_core_extra_phdrs();
+ segs = cprm->vma_count + elf_core_extra_phdrs();
/* for notes section */
segs++;
@@ -1558,7 +1553,7 @@ static int elf_fdpic_core_dump(struct co
/* Page-align dumped data */
dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
- offset += vma_data_size;
+ offset += cprm->vma_data_size;
offset += elf_core_extra_data_size();
e_shoff = offset;
@@ -1578,8 +1573,8 @@ static int elf_fdpic_core_dump(struct co
goto end_coredump;
/* write program headers for segments dump */
- for (i = 0; i < vma_count; i++) {
- struct core_vma_metadata *meta = vma_meta + i;
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *meta = cprm->vma_meta + i;
struct elf_phdr phdr;
size_t sz;
@@ -1628,7 +1623,7 @@ static int elf_fdpic_core_dump(struct co
dump_skip_to(cprm, dataoff);
- if (!elf_fdpic_dump_segments(cprm, vma_meta, vma_count))
+ if (!elf_fdpic_dump_segments(cprm, cprm->vma_meta, cprm->vma_count))
goto end_coredump;
if (!elf_core_write_extra_data(cprm))
@@ -1652,7 +1647,6 @@ end_coredump:
thread_list = thread_list->next;
kfree(tmp);
}
- kvfree(vma_meta);
kfree(phdr4note);
kfree(elf);
kfree(psinfo);
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -53,6 +53,8 @@
#include <trace/events/sched.h>
+static bool dump_vma_snapshot(struct coredump_params *cprm);
+
int core_uses_pid;
unsigned int core_pipe_limit;
char core_pattern[CORENAME_MAX_SIZE] = "core";
@@ -601,6 +603,7 @@ void do_coredump(const kernel_siginfo_t
* by any locks.
*/
.mm_flags = mm->flags,
+ .vma_meta = NULL,
};
audit_core_dumps(siginfo->si_signo);
@@ -815,6 +818,9 @@ void do_coredump(const kernel_siginfo_t
pr_info("Core dump to |%s disabled\n", cn.corename);
goto close_fail;
}
+ if (!dump_vma_snapshot(&cprm))
+ goto close_fail;
+
file_start_write(cprm.file);
core_dumped = binfmt->core_dump(&cprm);
/*
@@ -828,6 +834,7 @@ void do_coredump(const kernel_siginfo_t
dump_emit(&cprm, "", 1);
}
file_end_write(cprm.file);
+ kvfree(cprm.vma_meta);
}
if (ispipe && core_pipe_limit)
wait_for_dump_helpers(cprm.file);
@@ -1108,14 +1115,11 @@ static struct vm_area_struct *next_vma(s
* Under the mmap_lock, take a snapshot of relevant information about the task's
* VMAs.
*/
-int dump_vma_snapshot(struct coredump_params *cprm, int *vma_count,
- struct core_vma_metadata **vma_meta,
- size_t *vma_data_size_ptr)
+static bool dump_vma_snapshot(struct coredump_params *cprm)
{
struct vm_area_struct *vma, *gate_vma;
struct mm_struct *mm = current->mm;
int i;
- size_t vma_data_size = 0;
/*
* Once the stack expansion code is fixed to not change VMA bounds
@@ -1123,20 +1127,21 @@ int dump_vma_snapshot(struct coredump_pa
* mmap_lock in read mode.
*/
if (mmap_write_lock_killable(mm))
- return -EINTR;
+ return false;
+ cprm->vma_data_size = 0;
gate_vma = get_gate_vma(mm);
- *vma_count = mm->map_count + (gate_vma ? 1 : 0);
+ cprm->vma_count = mm->map_count + (gate_vma ? 1 : 0);
- *vma_meta = kvmalloc_array(*vma_count, sizeof(**vma_meta), GFP_KERNEL);
- if (!*vma_meta) {
+ cprm->vma_meta = kvmalloc_array(cprm->vma_count, sizeof(*cprm->vma_meta), GFP_KERNEL);
+ if (!cprm->vma_meta) {
mmap_write_unlock(mm);
- return -ENOMEM;
+ return false;
}
for (i = 0, vma = first_vma(current, gate_vma); vma != NULL;
vma = next_vma(vma, gate_vma), i++) {
- struct core_vma_metadata *m = (*vma_meta) + i;
+ struct core_vma_metadata *m = cprm->vma_meta + i;
m->start = vma->vm_start;
m->end = vma->vm_end;
@@ -1146,13 +1151,14 @@ int dump_vma_snapshot(struct coredump_pa
mmap_write_unlock(mm);
- if (WARN_ON(i != *vma_count)) {
- kvfree(*vma_meta);
- return -EFAULT;
+ if (WARN_ON(i != cprm->vma_count)) {
+ kvfree(cprm->vma_meta);
+ return false;
}
- for (i = 0; i < *vma_count; i++) {
- struct core_vma_metadata *m = (*vma_meta) + i;
+
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *m = cprm->vma_meta + i;
if (m->dump_size == DUMP_SIZE_MAYBE_ELFHDR_PLACEHOLDER) {
char elfmag[SELFMAG];
@@ -1165,9 +1171,8 @@ int dump_vma_snapshot(struct coredump_pa
}
}
- vma_data_size += m->dump_size;
+ cprm->vma_data_size += m->dump_size;
}
- *vma_data_size_ptr = vma_data_size;
- return 0;
+ return true;
}
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -87,6 +87,9 @@ struct coredump_params {
loff_t written;
loff_t pos;
loff_t to_skip;
+ int vma_count;
+ size_t vma_data_size;
+ struct core_vma_metadata *vma_meta;
};
/*
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -29,9 +29,6 @@ extern int dump_emit(struct coredump_par
extern int dump_align(struct coredump_params *cprm, int align);
int dump_user_range(struct coredump_params *cprm, unsigned long start,
unsigned long len);
-int dump_vma_snapshot(struct coredump_params *cprm, int *vma_count,
- struct core_vma_metadata **vma_meta,
- size_t *vma_data_size_ptr);
extern void do_coredump(const kernel_siginfo_t *siginfo);
#else
static inline void do_coredump(const kernel_siginfo_t *siginfo) {}
From: Ritesh Harjani <[email protected]>
[ Upstream commit bfdc502a4a4c058bf4cbb1df0c297761d528f54d ]
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
<...>
[ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters
[ 74.533214] EXT4-fs (loop3): shut down requested (2)
[ 74.536705] Aborting journal on device loop3-8.
[ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000
[ 74.703727] Faulting instruction address: 0xc0000000007bffb8
cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060]
pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0
lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0
sp: c000000015db7300
msr: 800000000280b033
dar: c00000005e980000
dsisr: 40000000
current = 0xc000000027af6880
paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01
pid = 5167, comm = mount
<...>
enter ? for help
[c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410
[c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000
[c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0
[c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0
[c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0
[c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10
[c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350
[c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40
[c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100
[c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70
[c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550
[c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0
[c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/2609bc8f66fc15870616ee416a18a3d392a209c4.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/mballoc.c | 131 +++++++++++++++++++++++++++-------------------
1 file changed, 76 insertions(+), 55 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 9a749327336f..9b3fad3235b8 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3901,72 +3901,93 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
ext4_grpblk_t blkoff;
int i, err;
int already;
- unsigned int clen, clen_changed;
+ unsigned int clen, clen_changed, thisgrp_len;
- clen = EXT4_NUM_B2C(sbi, len);
-
- ext4_get_group_no_and_offset(sb, block, &group, &blkoff);
- bitmap_bh = ext4_read_block_bitmap(sb, group);
- if (IS_ERR(bitmap_bh)) {
- err = PTR_ERR(bitmap_bh);
- bitmap_bh = NULL;
- goto out_err;
- }
-
- err = -EIO;
- gdp = ext4_get_group_desc(sb, group, &gdp_bh);
- if (!gdp)
- goto out_err;
+ while (len > 0) {
+ ext4_get_group_no_and_offset(sb, block, &group, &blkoff);
- ext4_lock_group(sb, group);
- already = 0;
- for (i = 0; i < clen; i++)
- if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
- already++;
-
- clen_changed = clen - already;
- if (state)
- ext4_set_bits(bitmap_bh->b_data, blkoff, clen);
- else
- mb_test_and_clear_bits(bitmap_bh->b_data, blkoff, clen);
- if (ext4_has_group_desc_csum(sb) &&
- (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))) {
- gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
- ext4_free_group_clusters_set(sb, gdp,
- ext4_free_clusters_after_init(sb,
- group, gdp));
- }
- if (state)
- clen = ext4_free_group_clusters(sb, gdp) - clen_changed;
- else
- clen = ext4_free_group_clusters(sb, gdp) + clen_changed;
+ /*
+ * Check to see if we are freeing blocks across a group
+ * boundary.
+ * In case of flex_bg, this can happen that (block, len) may
+ * span across more than one group. In that case we need to
+ * get the corresponding group metadata to work with.
+ * For this we have goto again loop.
+ */
+ thisgrp_len = min_t(unsigned int, (unsigned int)len,
+ EXT4_BLOCKS_PER_GROUP(sb) - EXT4_C2B(sbi, blkoff));
+ clen = EXT4_NUM_B2C(sbi, thisgrp_len);
- ext4_free_group_clusters_set(sb, gdp, clen);
- ext4_block_bitmap_csum_set(sb, group, gdp, bitmap_bh);
- ext4_group_desc_csum_set(sb, group, gdp);
+ bitmap_bh = ext4_read_block_bitmap(sb, group);
+ if (IS_ERR(bitmap_bh)) {
+ err = PTR_ERR(bitmap_bh);
+ bitmap_bh = NULL;
+ break;
+ }
- ext4_unlock_group(sb, group);
+ err = -EIO;
+ gdp = ext4_get_group_desc(sb, group, &gdp_bh);
+ if (!gdp)
+ break;
- if (sbi->s_log_groups_per_flex) {
- ext4_group_t flex_group = ext4_flex_group(sbi, group);
- struct flex_groups *fg = sbi_array_rcu_deref(sbi,
- s_flex_groups, flex_group);
+ ext4_lock_group(sb, group);
+ already = 0;
+ for (i = 0; i < clen; i++)
+ if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) ==
+ !state)
+ already++;
+ clen_changed = clen - already;
if (state)
- atomic64_sub(clen_changed, &fg->free_clusters);
+ ext4_set_bits(bitmap_bh->b_data, blkoff, clen);
else
- atomic64_add(clen_changed, &fg->free_clusters);
+ mb_test_and_clear_bits(bitmap_bh->b_data, blkoff, clen);
+ if (ext4_has_group_desc_csum(sb) &&
+ (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))) {
+ gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
+ ext4_free_group_clusters_set(sb, gdp,
+ ext4_free_clusters_after_init(sb, group, gdp));
+ }
+ if (state)
+ clen = ext4_free_group_clusters(sb, gdp) - clen_changed;
+ else
+ clen = ext4_free_group_clusters(sb, gdp) + clen_changed;
+
+ ext4_free_group_clusters_set(sb, gdp, clen);
+ ext4_block_bitmap_csum_set(sb, group, gdp, bitmap_bh);
+ ext4_group_desc_csum_set(sb, group, gdp);
+
+ ext4_unlock_group(sb, group);
+
+ if (sbi->s_log_groups_per_flex) {
+ ext4_group_t flex_group = ext4_flex_group(sbi, group);
+ struct flex_groups *fg = sbi_array_rcu_deref(sbi,
+ s_flex_groups, flex_group);
+
+ if (state)
+ atomic64_sub(clen_changed, &fg->free_clusters);
+ else
+ atomic64_add(clen_changed, &fg->free_clusters);
+
+ }
+
+ err = ext4_handle_dirty_metadata(NULL, NULL, bitmap_bh);
+ if (err)
+ break;
+ sync_dirty_buffer(bitmap_bh);
+ err = ext4_handle_dirty_metadata(NULL, NULL, gdp_bh);
+ sync_dirty_buffer(gdp_bh);
+ if (err)
+ break;
+
+ block += thisgrp_len;
+ len -= thisgrp_len;
+ brelse(bitmap_bh);
+ BUG_ON(len < 0);
}
- err = ext4_handle_dirty_metadata(NULL, NULL, bitmap_bh);
if (err)
- goto out_err;
- sync_dirty_buffer(bitmap_bh);
- err = ext4_handle_dirty_metadata(NULL, NULL, gdp_bh);
- sync_dirty_buffer(gdp_bh);
-
-out_err:
- brelse(bitmap_bh);
+ brelse(bitmap_bh);
}
/*
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
[ Upstream commit d8a441e53e2434b1401e52dfd66b05263e442edc ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
In owl-s900.s, the { 0, 8 } element was probably meant to be just that,
so this patch changes { 0, 8 } to { 0, 0 }.
Fixes: d47317ca4ade1 ("clk: actions: Add S700 SoC clock support")
Fixes: d85d20053e195 ("clk: actions: Add S900 SoC clock support")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/actions/owl-s700.c | 1 +
drivers/clk/actions/owl-s900.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/actions/owl-s700.c b/drivers/clk/actions/owl-s700.c
index a2f34d13fb54..6ea7da1d6d75 100644
--- a/drivers/clk/actions/owl-s700.c
+++ b/drivers/clk/actions/owl-s700.c
@@ -162,6 +162,7 @@ static struct clk_div_table hdmia_div_table[] = {
static struct clk_div_table rmii_div_table[] = {
{0, 4}, {1, 10},
+ {0, 0}
};
/* divider clocks */
diff --git a/drivers/clk/actions/owl-s900.c b/drivers/clk/actions/owl-s900.c
index 790890978424..5144ada2c7e1 100644
--- a/drivers/clk/actions/owl-s900.c
+++ b/drivers/clk/actions/owl-s900.c
@@ -140,7 +140,7 @@ static struct clk_div_table rmii_ref_div_table[] = {
static struct clk_div_table usb3_mac_div_table[] = {
{ 1, 2 }, { 2, 3 }, { 3, 4 },
- { 0, 8 },
+ { 0, 0 }
};
static struct clk_div_table i2s_div_table[] = {
--
2.34.1
From: Masahiro Yamada <[email protected]>
commit bf5c0c2231bcab677e5cdfb7f73e6c79f6d8c2d4 upstream.
This log message was accidentally chopped off.
I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].
I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.
[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/
Fixes: 4a6795933a89 ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/mod/modpost.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -669,7 +669,7 @@ static void handle_modversion(const stru
unsigned int crc;
if (sym->st_shndx == SHN_UNDEF) {
- warn("EXPORT symbol \"%s\" [%s%s] version ...\n"
+ warn("EXPORT symbol \"%s\" [%s%s] version generation failed, symbol will not be versioned.\n"
"Is \"%s\" prototyped in <asm/asm-prototypes.h>?\n",
symname, mod->name, mod->is_vmlinux ? "" : ".ko",
symname);
From: George Kennedy <[email protected]>
[ Upstream commit 5c6f402bdcf9e7239c6bc7087eda71ac99b31379 ]
Do a sanity check on pixclock value to avoid divide by zero.
If the pixclock value is zero, the cirrusfb driver will round up
pixclock to get the derived frequency as close to maxclock as
possible.
Syzkaller reported a divide error in cirrusfb_check_pixclock.
divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260
Call Trace:
fb_set_var+0x398/0xf90
do_fb_ioctl+0x4b8/0x6f0
fb_ioctl+0xeb/0x130
__x64_sys_ioctl+0x19d/0x220
do_syscall_64+0x3a/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: George Kennedy <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/cirrusfb.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
index 93802abbbc72..3d47c347b897 100644
--- a/drivers/video/fbdev/cirrusfb.c
+++ b/drivers/video/fbdev/cirrusfb.c
@@ -469,7 +469,7 @@ static int cirrusfb_check_mclk(struct fb_info *info, long freq)
return 0;
}
-static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
+static int cirrusfb_check_pixclock(struct fb_var_screeninfo *var,
struct fb_info *info)
{
long freq;
@@ -478,9 +478,7 @@ static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
unsigned maxclockidx = var->bits_per_pixel >> 3;
/* convert from ps to kHz */
- freq = PICOS2KHZ(var->pixclock);
-
- dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
+ freq = PICOS2KHZ(var->pixclock ? : 1);
maxclock = cirrusfb_board_info[cinfo->btype].maxclock[maxclockidx];
cinfo->multiplexing = 0;
@@ -488,11 +486,13 @@ static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
/* If the frequency is greater than we can support, we might be able
* to use multiplexing for the video mode */
if (freq > maxclock) {
- dev_err(info->device,
- "Frequency greater than maxclock (%ld kHz)\n",
- maxclock);
- return -EINVAL;
+ var->pixclock = KHZ2PICOS(maxclock);
+
+ while ((freq = PICOS2KHZ(var->pixclock)) > maxclock)
+ var->pixclock++;
}
+ dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
+
/*
* Additional constraint: 8bpp uses DAC clock doubling to allow maximum
* pixel clock
--
2.34.1
From: Niels Dossche <[email protected]>
[ Upstream commit 9fa6b4cda3b414e990f008f45f9bcecbcb54d4d1 ]
hci_le_conn_failed function's documentation says that the caller must
hold hdev->lock. The only callsite that does not hold that lock is
hci_le_conn_failed. The other 3 callsites hold the hdev->lock very
locally. The solution is to hold the lock during the call to
hci_le_conn_failed.
Fixes: 3c857757ef6e ("Bluetooth: Add directed advertising support through connect()")
Signed-off-by: Niels Dossche <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_conn.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 2b5059a56cda..7a7e92be1652 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -541,7 +541,9 @@ static void le_conn_timeout(struct work_struct *work)
if (conn->role == HCI_ROLE_SLAVE) {
/* Disable LE Advertising */
le_disable_advertising(hdev);
+ hci_dev_lock(hdev);
hci_le_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
+ hci_dev_unlock(hdev);
return;
}
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ]
ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc
Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.
For instance, this can happen if the kernel is run with "acpi=off"
in the command line.
Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/
Reported-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/nswalk.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 915c2433463d..e7c30ce06e18 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -169,6 +169,9 @@ acpi_ns_walk_namespace(acpi_object_type type,
if (start_node == ACPI_ROOT_OBJECT) {
start_node = acpi_gbl_root_node;
+ if (!start_node) {
+ return_ACPI_STATUS(AE_NO_NAMESPACE);
+ }
}
/* Null child means "get first node" */
--
2.34.1
From: Steven Rostedt (Google) <[email protected]>
commit 795301d3c28996219d555023ac6863401b6076bc upstream.
When an enum is used in the visible parts of a trace event that is
exported to user space, the user space applications like perf and
trace-cmd do not have a way to know what the value of the enum is. To
solve this, at boot up (or module load) the printk formats are modified to
replace the enum with their numeric value in the string output.
Array fields of the event are defined by [<nr-elements>] in the type
portion of the format file so that the user space parsers can correctly
parse the array into the appropriate size chunks. But in some trace
events, an enum is used in defining the size of the array, which once
again breaks the parsing of user space tooling.
This was solved the same way as the print formats were, but it modified
the type strings of the trace event. This caused crashes in some
architectures because, as supposed to the print string, is a const string
value. This was not detected on x86, as it appears that const strings are
still writable (at least in boot up), but other architectures this is not
the case, and writing to a const string will cause a kernel fault.
To fix this, use kstrdup() to copy the type before modifying it. If the
trace event is for the core kernel there's no need to free it because the
string will be in use for the life of the machine being on line. For
modules, create a link list to store all the strings being allocated for
modules and when the module is removed, free them.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Tested-by: Marc Zyngier <[email protected]>
Tested-by: Sven Schnelle <[email protected]>
Reported-by: Sven Schnelle <[email protected]>
Fixes: b3bc8547d3be ("tracing: Have TRACE_DEFINE_ENUM affect trace event types as well")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_events.c | 62 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 61 insertions(+), 1 deletion(-)
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -40,6 +40,14 @@ static LIST_HEAD(ftrace_generic_fields);
static LIST_HEAD(ftrace_common_fields);
static bool eventdir_initialized;
+static LIST_HEAD(module_strings);
+
+struct module_string {
+ struct list_head next;
+ struct module *module;
+ char *str;
+};
+
#define GFP_TRACE (GFP_KERNEL | __GFP_ZERO)
static struct kmem_cache *field_cachep;
@@ -2637,14 +2645,40 @@ static void update_event_printk(struct t
}
}
+static void add_str_to_module(struct module *module, char *str)
+{
+ struct module_string *modstr;
+
+ modstr = kmalloc(sizeof(*modstr), GFP_KERNEL);
+
+ /*
+ * If we failed to allocate memory here, then we'll just
+ * let the str memory leak when the module is removed.
+ * If this fails to allocate, there's worse problems than
+ * a leaked string on module removal.
+ */
+ if (WARN_ON_ONCE(!modstr))
+ return;
+
+ modstr->module = module;
+ modstr->str = str;
+
+ list_add(&modstr->next, &module_strings);
+}
+
static void update_event_fields(struct trace_event_call *call,
struct trace_eval_map *map)
{
struct ftrace_event_field *field;
struct list_head *head;
char *ptr;
+ char *str;
int len = strlen(map->eval_string);
+ /* Dynamic events should never have field maps */
+ if (WARN_ON_ONCE(call->flags & TRACE_EVENT_FL_DYNAMIC))
+ return;
+
head = trace_get_fields(call);
list_for_each_entry(field, head, link) {
ptr = strchr(field->type, '[');
@@ -2658,9 +2692,26 @@ static void update_event_fields(struct t
if (strncmp(map->eval_string, ptr, len) != 0)
continue;
+ str = kstrdup(field->type, GFP_KERNEL);
+ if (WARN_ON_ONCE(!str))
+ return;
+ ptr = str + (ptr - field->type);
ptr = eval_replace(ptr, map, len);
/* enum/sizeof string smaller than value */
- WARN_ON_ONCE(!ptr);
+ if (WARN_ON_ONCE(!ptr)) {
+ kfree(str);
+ continue;
+ }
+
+ /*
+ * If the event is part of a module, then we need to free the string
+ * when the module is removed. Otherwise, it will stay allocated
+ * until a reboot.
+ */
+ if (call->module)
+ add_str_to_module(call->module, str);
+
+ field->type = str;
}
}
@@ -2883,6 +2934,7 @@ static void trace_module_add_events(stru
static void trace_module_remove_events(struct module *mod)
{
struct trace_event_call *call, *p;
+ struct module_string *modstr, *m;
down_write(&trace_event_sem);
list_for_each_entry_safe(call, p, &ftrace_events, list) {
@@ -2891,6 +2943,14 @@ static void trace_module_remove_events(s
if (call->module == mod)
__trace_remove_event_call(call);
}
+ /* Check for any strings allocade for this module */
+ list_for_each_entry_safe(modstr, m, &module_strings, next) {
+ if (modstr->module != mod)
+ continue;
+ list_del(&modstr->next);
+ kfree(modstr->str);
+ kfree(modstr);
+ }
up_write(&trace_event_sem);
/*
From: Quinn Tran <[email protected]>
commit 73825fd7a37c1a685e9e9e27c9dc91ef1f3e2971 upstream.
Silence compile warning due to unaligned memory access.
qla_edif.c:713:45: warning: taking address of packed member 'u' of class or
structure 'auth_complete_cmd' may result in an unaligned pointer value
[-Waddress-of-packed-member]
fcport = qla2x00_find_fcport_by_pid(vha, &appplogiok.u.d_id);
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_edif.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_edif.c
+++ b/drivers/scsi/qla2xxx/qla_edif.c
@@ -668,6 +668,11 @@ qla_edif_app_authok(scsi_qla_host_t *vha
bsg_job->request_payload.sg_cnt, &appplogiok,
sizeof(struct auth_complete_cmd));
+ /* silent unaligned access warning */
+ portid.b.domain = appplogiok.u.d_id.b.domain;
+ portid.b.area = appplogiok.u.d_id.b.area;
+ portid.b.al_pa = appplogiok.u.d_id.b.al_pa;
+
switch (appplogiok.type) {
case PL_TYPE_WWPN:
fcport = qla2x00_find_fcport_by_wwpn(vha,
@@ -678,7 +683,7 @@ qla_edif_app_authok(scsi_qla_host_t *vha
__func__, appplogiok.u.wwpn);
break;
case PL_TYPE_DID:
- fcport = qla2x00_find_fcport_by_pid(vha, &appplogiok.u.d_id);
+ fcport = qla2x00_find_fcport_by_pid(vha, &portid);
if (!fcport)
ql_dbg(ql_dbg_edif, vha, 0x911d,
"%s d_id lookup failed: %x\n", __func__,
@@ -777,6 +782,11 @@ qla_edif_app_authfail(scsi_qla_host_t *v
bsg_job->request_payload.sg_cnt, &appplogifail,
sizeof(struct auth_complete_cmd));
+ /* silent unaligned access warning */
+ portid.b.domain = appplogifail.u.d_id.b.domain;
+ portid.b.area = appplogifail.u.d_id.b.area;
+ portid.b.al_pa = appplogifail.u.d_id.b.al_pa;
+
/*
* TODO: edif: app has failed this plogi. Inform driver to
* take any action (if any).
@@ -788,7 +798,7 @@ qla_edif_app_authfail(scsi_qla_host_t *v
SET_DID_STATUS(bsg_reply->result, DID_OK);
break;
case PL_TYPE_DID:
- fcport = qla2x00_find_fcport_by_pid(vha, &appplogifail.u.d_id);
+ fcport = qla2x00_find_fcport_by_pid(vha, &portid);
if (!fcport)
ql_dbg(ql_dbg_edif, vha, 0x911d,
"%s d_id lookup failed: %x\n", __func__,
@@ -1253,6 +1263,7 @@ qla24xx_sadb_update(struct bsg_job *bsg_
int result = 0;
struct qla_sa_update_frame sa_frame;
struct srb_iocb *iocb_cmd;
+ port_id_t portid;
ql_dbg(ql_dbg_edif + ql_dbg_verbose, vha, 0x911d,
"%s entered, vha: 0x%p\n", __func__, vha);
@@ -1276,7 +1287,12 @@ qla24xx_sadb_update(struct bsg_job *bsg_
goto done;
}
- fcport = qla2x00_find_fcport_by_pid(vha, &sa_frame.port_id);
+ /* silent unaligned access warning */
+ portid.b.domain = sa_frame.port_id.b.domain;
+ portid.b.area = sa_frame.port_id.b.area;
+ portid.b.al_pa = sa_frame.port_id.b.al_pa;
+
+ fcport = qla2x00_find_fcport_by_pid(vha, &portid);
if (fcport) {
found = 1;
if (sa_frame.flags == QLA_SA_UPDATE_FLAGS_TX_KEY)
From: Randy Dunlap <[email protected]>
[ Upstream commit 8755d57ba1ff910666572fab9e32890e8cc6ed3b ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from setup_kmac().
Fixes: 9e21c7e40b7e ("MIPS: RB532: Replace parse_mac_addr() with mac_pton().")
Fixes: 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Randy Dunlap <[email protected]>
From: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Phil Sutter <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Daniel Walter <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/rb532/devices.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 04684990e28e..b7f6f782d9a1 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -301,11 +301,9 @@ static int __init plat_setup_devices(void)
static int __init setup_kmac(char *s)
{
printk(KERN_INFO "korina mac = %s\n", s);
- if (!mac_pton(s, korina_dev0_data.mac)) {
+ if (!mac_pton(s, korina_dev0_data.mac))
printk(KERN_ERR "Invalid mac\n");
- return -EINVAL;
- }
- return 0;
+ return 1;
}
__setup("kmac=", setup_kmac);
--
2.34.1
From: Trond Myklebust <[email protected]>
[ Upstream commit d02d81efc7564b4d5446a02e0214a164cf00b1f3 ]
If __nfs_pageio_add_request() fails to add the request, it will return
with either desc->pg_error < 0, or mirror->pg_recoalesce will be set, so
we are guaranteed either to exit the function altogether, or to loop.
However if there is nothing left in mirror->pg_list to coalesce, we must
exit, so make sure that we clear mirror->pg_recoalesce every time we
loop.
Reported-by: Olga Kornievskaia <[email protected]>
Fixes: 70536bf4eb07 ("NFS: Clean up reset of the mirror accounting variables")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/pagelist.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index cc232d1f16f2..b1130dc200d2 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1227,6 +1227,7 @@ static int nfs_do_recoalesce(struct nfs_pageio_descriptor *desc)
do {
list_splice_init(&mirror->pg_list, &head);
+ mirror->pg_recoalesce = 0;
while (!list_empty(&head)) {
struct nfs_page *req;
--
2.34.1
From: lic121 <[email protected]>
[ Upstream commit 9c6e6a80ee741adf6cb3cfd8eef7d1554f91fceb ]
xsk_umem__create() does mmap for fill/comp rings, but xsk_umem__delete()
doesn't do the unmap. This works fine for regular cases, because
xsk_socket__delete() does unmap for the rings. But for the case that
xsk_socket__create_shared() fails, umem rings are not unmapped.
fill_save/comp_save are checked to determine if rings have already be
unmapped by xsk. If fill_save and comp_save are NULL, it means that the
rings have already been used by xsk. Then they are supposed to be
unmapped by xsk_socket__delete(). Otherwise, xsk_umem__delete() does the
unmap.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Cheng Li <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]~
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/xsk.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index e9b619aa0cdf..a27b3141463a 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -1210,12 +1210,23 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
int xsk_umem__delete(struct xsk_umem *umem)
{
+ struct xdp_mmap_offsets off;
+ int err;
+
if (!umem)
return 0;
if (umem->refcount)
return -EBUSY;
+ err = xsk_get_mmap_offsets(umem->fd, &off);
+ if (!err && umem->fill_save && umem->comp_save) {
+ munmap(umem->fill_save->ring - off.fr.desc,
+ off.fr.desc + umem->config.fill_size * sizeof(__u64));
+ munmap(umem->comp_save->ring - off.cr.desc,
+ off.cr.desc + umem->config.comp_size * sizeof(__u64));
+ }
+
close(umem->fd);
free(umem);
--
2.34.1
From: Jian Shen <[email protected]>
[ Upstream commit 1932a624ab88ff407d1a1d567fe581faa15dc725 ]
When adding port base VLAN, vf VLAN need to remove from HW and modify
the vlan state in vf VLAN list as false. If the periodicity task is
freeing the same node, it may cause "use after free" error.
This patch adds a vlan list lock to protect the vlan list.
Fixes: c6075b193462 ("net: hns3: Record VF vlan tables")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../hisilicon/hns3/hns3pf/hclge_main.c | 38 +++++++++++++++++--
.../hisilicon/hns3/hns3pf/hclge_main.h | 1 +
2 files changed, 35 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 4be90d0f2b91..af6c4a5cb0a2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10078,19 +10078,28 @@ static void hclge_add_vport_vlan_table(struct hclge_vport *vport, u16 vlan_id,
bool writen_to_tbl)
{
struct hclge_vport_vlan_cfg *vlan, *tmp;
+ struct hclge_dev *hdev = vport->back;
- list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node)
- if (vlan->vlan_id == vlan_id)
+ mutex_lock(&hdev->vport_lock);
+
+ list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
+ if (vlan->vlan_id == vlan_id) {
+ mutex_unlock(&hdev->vport_lock);
return;
+ }
+ }
vlan = kzalloc(sizeof(*vlan), GFP_KERNEL);
- if (!vlan)
+ if (!vlan) {
+ mutex_unlock(&hdev->vport_lock);
return;
+ }
vlan->hd_tbl_status = writen_to_tbl;
vlan->vlan_id = vlan_id;
list_add_tail(&vlan->node, &vport->vlan_list);
+ mutex_unlock(&hdev->vport_lock);
}
static int hclge_add_vport_all_vlan_table(struct hclge_vport *vport)
@@ -10099,6 +10108,8 @@ static int hclge_add_vport_all_vlan_table(struct hclge_vport *vport)
struct hclge_dev *hdev = vport->back;
int ret;
+ mutex_lock(&hdev->vport_lock);
+
list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
if (!vlan->hd_tbl_status) {
ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q),
@@ -10108,12 +10119,16 @@ static int hclge_add_vport_all_vlan_table(struct hclge_vport *vport)
dev_err(&hdev->pdev->dev,
"restore vport vlan list failed, ret=%d\n",
ret);
+
+ mutex_unlock(&hdev->vport_lock);
return ret;
}
}
vlan->hd_tbl_status = true;
}
+ mutex_unlock(&hdev->vport_lock);
+
return 0;
}
@@ -10123,6 +10138,8 @@ static void hclge_rm_vport_vlan_table(struct hclge_vport *vport, u16 vlan_id,
struct hclge_vport_vlan_cfg *vlan, *tmp;
struct hclge_dev *hdev = vport->back;
+ mutex_lock(&hdev->vport_lock);
+
list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
if (vlan->vlan_id == vlan_id) {
if (is_write_tbl && vlan->hd_tbl_status)
@@ -10137,6 +10154,8 @@ static void hclge_rm_vport_vlan_table(struct hclge_vport *vport, u16 vlan_id,
break;
}
}
+
+ mutex_unlock(&hdev->vport_lock);
}
void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list)
@@ -10144,6 +10163,8 @@ void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list)
struct hclge_vport_vlan_cfg *vlan, *tmp;
struct hclge_dev *hdev = vport->back;
+ mutex_lock(&hdev->vport_lock);
+
list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
if (vlan->hd_tbl_status)
hclge_set_vlan_filter_hw(hdev,
@@ -10159,6 +10180,7 @@ void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list)
}
}
clear_bit(vport->vport_id, hdev->vf_vlan_full);
+ mutex_unlock(&hdev->vport_lock);
}
void hclge_uninit_vport_vlan_table(struct hclge_dev *hdev)
@@ -10167,6 +10189,8 @@ void hclge_uninit_vport_vlan_table(struct hclge_dev *hdev)
struct hclge_vport *vport;
int i;
+ mutex_lock(&hdev->vport_lock);
+
for (i = 0; i < hdev->num_alloc_vport; i++) {
vport = &hdev->vport[i];
list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
@@ -10174,6 +10198,8 @@ void hclge_uninit_vport_vlan_table(struct hclge_dev *hdev)
kfree(vlan);
}
}
+
+ mutex_unlock(&hdev->vport_lock);
}
void hclge_restore_vport_port_base_vlan_config(struct hclge_dev *hdev)
@@ -10213,6 +10239,8 @@ void hclge_restore_vport_vlan_table(struct hclge_vport *vport)
struct hclge_dev *hdev = vport->back;
int ret;
+ mutex_lock(&hdev->vport_lock);
+
if (vport->port_base_vlan_cfg.state == HNAE3_PORT_BASE_VLAN_DISABLE) {
list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) {
ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q),
@@ -10223,6 +10251,8 @@ void hclge_restore_vport_vlan_table(struct hclge_vport *vport)
vlan->hd_tbl_status = true;
}
}
+
+ mutex_unlock(&hdev->vport_lock);
}
/* For global reset and imp reset, hardware will clear the mac table,
@@ -12120,8 +12150,8 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
hclge_misc_irq_uninit(hdev);
hclge_devlink_uninit(hdev);
hclge_pci_uninit(hdev);
- mutex_destroy(&hdev->vport_lock);
hclge_uninit_vport_vlan_table(hdev);
+ mutex_destroy(&hdev->vport_lock);
ae_dev->priv = NULL;
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index ae8c26c194ec..4d6dbfe0be7a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -1057,6 +1057,7 @@ struct hclge_vport {
spinlock_t mac_list_lock; /* protect mac address need to add/detele */
struct list_head uc_mac_list; /* Store VF unicast table */
struct list_head mc_mac_list; /* Store VF multicast table */
+
struct list_head vlan_list; /* Store VF vlan table */
};
--
2.34.1
From: Wei Fu <[email protected]>
[ Upstream commit 0991f6a38f576aa9a5e34713e23c998a3310d4d0 ]
After `bpftool gen skeleton`, the ${bpf_app}.skel.h will provide that
${bpf_app_name}__open helper to load bpf. If there is some error
like ENOMEM, the ${bpf_app_name}__open will rollback(free) the allocated
object, including `bpf_object_skeleton`.
Since the ${bpf_app_name}__create_skeleton set the obj->skeleton first
and not rollback it when error, it will cause double-free in
${bpf_app_name}__destory at ${bpf_app_name}__open. Therefore, we should
set the obj->skeleton before return 0;
Fixes: 5dc7a8b21144 ("bpftool, selftests/bpf: Embed object file inside skeleton")
Signed-off-by: Wei Fu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/gen.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/bpf/bpftool/gen.c b/tools/bpf/bpftool/gen.c
index d40d92bbf0e4..07fa502a4ac1 100644
--- a/tools/bpf/bpftool/gen.c
+++ b/tools/bpf/bpftool/gen.c
@@ -870,7 +870,6 @@ static int do_skeleton(int argc, char **argv)
s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));\n\
if (!s) \n\
goto err; \n\
- obj->skeleton = s; \n\
\n\
s->sz = sizeof(*s); \n\
s->name = \"%1$s\"; \n\
@@ -955,6 +954,7 @@ static int do_skeleton(int argc, char **argv)
\n\
\"; \n\
\n\
+ obj->skeleton = s; \n\
return 0; \n\
err: \n\
bpf_object__destroy_skeleton(s); \n\
--
2.34.1
From: Aashish Sharma <[email protected]>
[ Upstream commit 6fc51504388c1a1a53db8faafe9fff78fccc7c87 ]
Explicitly convert unsigned int in the right of the conditional
expression to int to match the left side operand and the return type,
fixing the following compiler warning:
drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned
type in conditional expression [-Wsign-compare]
Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service")
Signed-off-by: Aashish Sharma <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm-crypt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 916b7da16de2..154139bf7d22 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -2579,7 +2579,7 @@ static int crypt_set_keyring_key(struct crypt_config *cc, const char *key_string
static int get_key_size(char **key_string)
{
- return (*key_string[0] == ':') ? -EINVAL : strlen(*key_string) >> 1;
+ return (*key_string[0] == ':') ? -EINVAL : (int)(strlen(*key_string) >> 1);
}
#endif /* CONFIG_KEYS */
--
2.34.1
From: Darren Hart <[email protected]>
[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ]
Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:
watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]
Observed on Ampere Altra systems with a single BERT record of ~250KB.
The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in
/sys/firmware/acpi/tables/data/BERT
limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).
Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.
Signed-off-by: Darren Hart <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/apei/bert.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c
index 86211422f4ee..598fd19b65fa 100644
--- a/drivers/acpi/apei/bert.c
+++ b/drivers/acpi/apei/bert.c
@@ -29,6 +29,7 @@
#undef pr_fmt
#define pr_fmt(fmt) "BERT: " fmt
+#define ACPI_BERT_PRINT_MAX_LEN 1024
static int bert_disable;
@@ -58,8 +59,11 @@ static void __init bert_print_all(struct acpi_bert_region *region,
}
pr_info_once("Error records from previous boot:\n");
-
- cper_estatus_print(KERN_INFO HW_ERR, estatus);
+ if (region_len < ACPI_BERT_PRINT_MAX_LEN)
+ cper_estatus_print(KERN_INFO HW_ERR, estatus);
+ else
+ pr_info_once("Max print length exceeded, table data is available at:\n"
+ "/sys/firmware/acpi/tables/data/BERT");
/*
* Because the boot error source is "one-time polled" type,
--
2.34.1
From: Linus Torvalds <[email protected]>
commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 upstream.
Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1e02b), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better. 
And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.
So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.
Link: https://lore.kernel.org/all/[email protected]/ [1]
Link: https://lore.kernel.org/all/[email protected]/ [2]
Link: https://lore.kernel.org/all/[email protected]/ [3]
Suggested-by: Halil Pasic <[email protected]>
Tested-by: Oleksandr Natalenko <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/core-api/dma-attributes.rst | 8 --------
include/linux/dma-mapping.h | 8 --------
kernel/dma/swiotlb.c | 12 ++++++++----
3 files changed, 8 insertions(+), 20 deletions(-)
--- a/Documentation/core-api/dma-attributes.rst
+++ b/Documentation/core-api/dma-attributes.rst
@@ -130,11 +130,3 @@ accesses to DMA buffers in both privileg
subsystem that the buffer is fully accessible at the elevated privilege
level (and ideally inaccessible or at least read-only at the
lesser-privileged levels).
-
-DMA_ATTR_OVERWRITE
-------------------
-
-This is a hint to the DMA-mapping subsystem that the device is expected to
-overwrite the entire mapped size, thus the caller does not require any of the
-previous buffer contents to be preserved. This allows bounce-buffering
-implementations to optimise DMA_FROM_DEVICE transfers.
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -62,14 +62,6 @@
#define DMA_ATTR_PRIVILEGED (1UL << 9)
/*
- * This is a hint to the DMA-mapping subsystem that the device is expected
- * to overwrite the entire mapped size, thus the caller does not require any
- * of the previous buffer contents to be preserved. This allows
- * bounce-buffering implementations to optimise DMA_FROM_DEVICE transfers.
- */
-#define DMA_ATTR_OVERWRITE (1UL << 10)
-
-/*
* A dma_addr_t can hold any valid DMA or bus address for the platform. It can
* be given to a device to use as a DMA source or target. It is specific to a
* given device and there may be a translation between the CPU physical address
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -578,10 +578,14 @@ phys_addr_t swiotlb_tbl_map_single(struc
for (i = 0; i < nr_slots(alloc_size + offset); i++)
mem->slots[index + i].orig_addr = slot_addr(orig_addr, i);
tlb_addr = slot_addr(mem->start, index) + offset;
- if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
- (!(attrs & DMA_ATTR_OVERWRITE) || dir == DMA_TO_DEVICE ||
- dir == DMA_BIDIRECTIONAL))
- swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
+ /*
+ * When dir == DMA_FROM_DEVICE we could omit the copy from the orig
+ * to the tlb buffer, if we knew for sure the device will
+ * overwirte the entire current content. But we don't. Thus
+ * unconditional bounce may prevent leaking swiotlb content (i.e.
+ * kernel memory) to user-space.
+ */
+ swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
return tlb_addr;
}
From: Marcel Ziswiler <[email protected]>
[ Upstream commit e95622289f263662240544a9f0009b25c19e64d4 ]
This avoids firmware load error and sysfs fallback reported as follows:
[ 0.199448] imx-sdma 302c0000.dma-controller: Direct firmware load
for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.199487] imx-sdma 302c0000.dma-controller: Falling back to sysfs
fallback for: imx/sdma/sdma-imx7d.bin
Signed-off-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/configs/defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 545197bc0501..4972a81d40d6 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -921,7 +921,7 @@ CONFIG_DMADEVICES=y
CONFIG_DMA_BCM2835=y
CONFIG_DMA_SUN6I=m
CONFIG_FSL_EDMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
CONFIG_K3_DMA=y
CONFIG_MV_XOR=y
CONFIG_MV_XOR_V2=y
--
2.34.1
From: Wen Gong <[email protected]>
[ Upstream commit e3fb3d4418fce5484dfe7995fcd94c18b10a431a ]
In function ath10k_wow_convert_8023_to_80211(), it will do memcpy for
the new->pattern, and currently the new->pattern and new->mask is same
with the old, then the memcpy of new->pattern will also overwrite the
old->pattern, because the header format of new->pattern is 802.11,
its length is larger than the old->pattern which is 802.3. Then the
operation of "Copy frame body" will copy a mistake value because the
body memory has been overwrite when memcpy the new->pattern.
Assign another empty value to new_pattern to avoid the overwrite issue.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Fixes: fa3440fa2fa1 ("ath10k: convert wow pattern from 802.3 to 802.11")
Signed-off-by: Wen Gong <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/wow.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/wow.c b/drivers/net/wireless/ath/ath10k/wow.c
index 7d65c115669f..20b9aa8ddf7d 100644
--- a/drivers/net/wireless/ath/ath10k/wow.c
+++ b/drivers/net/wireless/ath/ath10k/wow.c
@@ -337,14 +337,15 @@ static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif,
if (patterns[i].mask[j / 8] & BIT(j % 8))
bitmask[j] = 0xff;
old_pattern.mask = bitmask;
- new_pattern = old_pattern;
if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) {
- if (patterns[i].pkt_offset < ETH_HLEN)
+ if (patterns[i].pkt_offset < ETH_HLEN) {
ath10k_wow_convert_8023_to_80211(&new_pattern,
&old_pattern);
- else
+ } else {
+ new_pattern = old_pattern;
new_pattern.pkt_offset += WOW_HDR_LEN - ETH_HLEN;
+ }
}
if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE))
--
2.34.1
From: Mustafa Ismail <[email protected]>
[ Upstream commit 6702bc14744847842a87fed21a795b6e8bab6965 ]
Currently, events on vlan netdevs are being ignored. Fix this by finding
the real netdev and processing the notifications for vlan netdevs.
Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mustafa Ismail <[email protected]>
Signed-off-by: Shiraz Saleem <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/irdma/utils.c | 48 ++++++++++++++++++-----------
1 file changed, 30 insertions(+), 18 deletions(-)
diff --git a/drivers/infiniband/hw/irdma/utils.c b/drivers/infiniband/hw/irdma/utils.c
index feebfe6bf31a..fee179fd8c67 100644
--- a/drivers/infiniband/hw/irdma/utils.c
+++ b/drivers/infiniband/hw/irdma/utils.c
@@ -150,31 +150,35 @@ int irdma_inetaddr_event(struct notifier_block *notifier, unsigned long event,
void *ptr)
{
struct in_ifaddr *ifa = ptr;
- struct net_device *netdev = ifa->ifa_dev->dev;
+ struct net_device *real_dev, *netdev = ifa->ifa_dev->dev;
struct irdma_device *iwdev;
struct ib_device *ibdev;
u32 local_ipaddr;
- ibdev = ib_device_get_by_netdev(netdev, RDMA_DRIVER_IRDMA);
+ real_dev = rdma_vlan_dev_real_dev(netdev);
+ if (!real_dev)
+ real_dev = netdev;
+
+ ibdev = ib_device_get_by_netdev(real_dev, RDMA_DRIVER_IRDMA);
if (!ibdev)
return NOTIFY_DONE;
iwdev = to_iwdev(ibdev);
local_ipaddr = ntohl(ifa->ifa_address);
ibdev_dbg(&iwdev->ibdev,
- "DEV: netdev %p event %lu local_ip=%pI4 MAC=%pM\n", netdev,
- event, &local_ipaddr, netdev->dev_addr);
+ "DEV: netdev %p event %lu local_ip=%pI4 MAC=%pM\n", real_dev,
+ event, &local_ipaddr, real_dev->dev_addr);
switch (event) {
case NETDEV_DOWN:
- irdma_manage_arp_cache(iwdev->rf, netdev->dev_addr,
+ irdma_manage_arp_cache(iwdev->rf, real_dev->dev_addr,
&local_ipaddr, true, IRDMA_ARP_DELETE);
- irdma_if_notify(iwdev, netdev, &local_ipaddr, true, false);
+ irdma_if_notify(iwdev, real_dev, &local_ipaddr, true, false);
irdma_gid_change_event(&iwdev->ibdev);
break;
case NETDEV_UP:
case NETDEV_CHANGEADDR:
- irdma_add_arp(iwdev->rf, &local_ipaddr, true, netdev->dev_addr);
- irdma_if_notify(iwdev, netdev, &local_ipaddr, true, true);
+ irdma_add_arp(iwdev->rf, &local_ipaddr, true, real_dev->dev_addr);
+ irdma_if_notify(iwdev, real_dev, &local_ipaddr, true, true);
irdma_gid_change_event(&iwdev->ibdev);
break;
default:
@@ -196,32 +200,36 @@ int irdma_inet6addr_event(struct notifier_block *notifier, unsigned long event,
void *ptr)
{
struct inet6_ifaddr *ifa = ptr;
- struct net_device *netdev = ifa->idev->dev;
+ struct net_device *real_dev, *netdev = ifa->idev->dev;
struct irdma_device *iwdev;
struct ib_device *ibdev;
u32 local_ipaddr6[4];
- ibdev = ib_device_get_by_netdev(netdev, RDMA_DRIVER_IRDMA);
+ real_dev = rdma_vlan_dev_real_dev(netdev);
+ if (!real_dev)
+ real_dev = netdev;
+
+ ibdev = ib_device_get_by_netdev(real_dev, RDMA_DRIVER_IRDMA);
if (!ibdev)
return NOTIFY_DONE;
iwdev = to_iwdev(ibdev);
irdma_copy_ip_ntohl(local_ipaddr6, ifa->addr.in6_u.u6_addr32);
ibdev_dbg(&iwdev->ibdev,
- "DEV: netdev %p event %lu local_ip=%pI6 MAC=%pM\n", netdev,
- event, local_ipaddr6, netdev->dev_addr);
+ "DEV: netdev %p event %lu local_ip=%pI6 MAC=%pM\n", real_dev,
+ event, local_ipaddr6, real_dev->dev_addr);
switch (event) {
case NETDEV_DOWN:
- irdma_manage_arp_cache(iwdev->rf, netdev->dev_addr,
+ irdma_manage_arp_cache(iwdev->rf, real_dev->dev_addr,
local_ipaddr6, false, IRDMA_ARP_DELETE);
- irdma_if_notify(iwdev, netdev, local_ipaddr6, false, false);
+ irdma_if_notify(iwdev, real_dev, local_ipaddr6, false, false);
irdma_gid_change_event(&iwdev->ibdev);
break;
case NETDEV_UP:
case NETDEV_CHANGEADDR:
irdma_add_arp(iwdev->rf, local_ipaddr6, false,
- netdev->dev_addr);
- irdma_if_notify(iwdev, netdev, local_ipaddr6, false, true);
+ real_dev->dev_addr);
+ irdma_if_notify(iwdev, real_dev, local_ipaddr6, false, true);
irdma_gid_change_event(&iwdev->ibdev);
break;
default:
@@ -243,14 +251,18 @@ int irdma_net_event(struct notifier_block *notifier, unsigned long event,
void *ptr)
{
struct neighbour *neigh = ptr;
+ struct net_device *real_dev, *netdev = (struct net_device *)neigh->dev;
struct irdma_device *iwdev;
struct ib_device *ibdev;
__be32 *p;
u32 local_ipaddr[4] = {};
bool ipv4 = true;
- ibdev = ib_device_get_by_netdev((struct net_device *)neigh->dev,
- RDMA_DRIVER_IRDMA);
+ real_dev = rdma_vlan_dev_real_dev(netdev);
+ if (!real_dev)
+ real_dev = netdev;
+
+ ibdev = ib_device_get_by_netdev(real_dev, RDMA_DRIVER_IRDMA);
if (!ibdev)
return NOTIFY_DONE;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 6a4760463dbc6b603690938c468839985189ce0a ]
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: 8c0984e5a753 ("power: move power supply drivers to power/supply")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/ab8500_fg.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 05fe9724ba50..57799a8079d4 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -2545,8 +2545,10 @@ static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
ret = kobject_init_and_add(&di->fg_kobject,
&ab8500_fg_ktype,
NULL, "battery");
- if (ret < 0)
+ if (ret < 0) {
+ kobject_put(&di->fg_kobject);
dev_err(di->dev, "failed to create sysfs entry\n");
+ }
return ret;
}
--
2.34.1
From: Peng Li <[email protected]>
[ Upstream commit 671cb8cbb9c9e24b681d21b1bfae991e2386ac73 ]
After disable sriov, VF still has some config and info need to be
cleaned, which configured by PF. This patch clean the HW config
and SW struct vport->vf_info.
Fixes: fa8d82e853e8 ("net: hns3: Add support of .sriov_configure in HNS3 driver")
Signed-off-by: Peng Li<[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 ++
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 18 +++++++
.../hisilicon/hns3/hns3pf/hclge_main.c | 50 +++++++++++++++++++
3 files changed, 71 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 4aa6d21f2fd8..8b7f059c49e6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -527,6 +527,8 @@ struct hnae3_ae_dev {
* Get 1588 rx hwstamp
* get_ts_info
* Get phc info
+ * clean_vf_config
+ * Clean residual vf info after disable sriov
*/
struct hnae3_ae_ops {
int (*init_ae_dev)(struct hnae3_ae_dev *ae_dev);
@@ -720,6 +722,7 @@ struct hnae3_ae_ops {
struct ethtool_ts_info *info);
int (*get_link_diagnosis_info)(struct hnae3_handle *handle,
u32 *status_code);
+ void (*clean_vf_config)(struct hnae3_ae_dev *ae_dev, int num_vfs);
};
struct hnae3_dcb_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index e4f6b5a8537c..16cbd146ad06 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2954,6 +2954,21 @@ static int hns3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return ret;
}
+/**
+ * hns3_clean_vf_config
+ * @pdev: pointer to a pci_dev structure
+ * @num_vfs: number of VFs allocated
+ *
+ * Clean residual vf config after disable sriov
+ **/
+static void hns3_clean_vf_config(struct pci_dev *pdev, int num_vfs)
+{
+ struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev);
+
+ if (ae_dev->ops->clean_vf_config)
+ ae_dev->ops->clean_vf_config(ae_dev, num_vfs);
+}
+
/* hns3_remove - Device removal routine
* @pdev: PCI device information struct
*/
@@ -2992,7 +3007,10 @@ static int hns3_pci_sriov_configure(struct pci_dev *pdev, int num_vfs)
else
return num_vfs;
} else if (!pci_vfs_assigned(pdev)) {
+ int num_vfs_pre = pci_num_vf(pdev);
+
pci_disable_sriov(pdev);
+ hns3_clean_vf_config(pdev, num_vfs_pre);
} else {
dev_warn(&pdev->dev,
"Unable to free VFs because some are assigned to VMs.\n");
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index d3a259ad8ce1..c1708ad32b88 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -12987,6 +12987,55 @@ static int hclge_get_link_diagnosis_info(struct hnae3_handle *handle,
return 0;
}
+/* After disable sriov, VF still has some config and info need clean,
+ * which configed by PF.
+ */
+static void hclge_clear_vport_vf_info(struct hclge_vport *vport, int vfid)
+{
+ struct hclge_dev *hdev = vport->back;
+ struct hclge_vlan_info vlan_info;
+ int ret;
+
+ /* after disable sriov, clean VF rate configured by PF */
+ ret = hclge_tm_qs_shaper_cfg(vport, 0);
+ if (ret)
+ dev_err(&hdev->pdev->dev,
+ "failed to clean vf%d rate config, ret = %d\n",
+ vfid, ret);
+
+ vlan_info.vlan_tag = 0;
+ vlan_info.qos = 0;
+ vlan_info.vlan_proto = ETH_P_8021Q;
+ ret = hclge_update_port_base_vlan_cfg(vport,
+ HNAE3_PORT_BASE_VLAN_DISABLE,
+ &vlan_info);
+ if (ret)
+ dev_err(&hdev->pdev->dev,
+ "failed to clean vf%d port base vlan, ret = %d\n",
+ vfid, ret);
+
+ ret = hclge_set_vf_spoofchk_hw(hdev, vport->vport_id, false);
+ if (ret)
+ dev_err(&hdev->pdev->dev,
+ "failed to clean vf%d spoof config, ret = %d\n",
+ vfid, ret);
+
+ memset(&vport->vf_info, 0, sizeof(vport->vf_info));
+}
+
+static void hclge_clean_vport_config(struct hnae3_ae_dev *ae_dev, int num_vfs)
+{
+ struct hclge_dev *hdev = ae_dev->priv;
+ struct hclge_vport *vport;
+ int i;
+
+ for (i = 0; i < num_vfs; i++) {
+ vport = &hdev->vport[i + HCLGE_VF_VPORT_START_NUM];
+
+ hclge_clear_vport_vf_info(vport, i);
+ }
+}
+
static const struct hnae3_ae_ops hclge_ops = {
.init_ae_dev = hclge_init_ae_dev,
.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -13088,6 +13137,7 @@ static const struct hnae3_ae_ops hclge_ops = {
.get_rx_hwts = hclge_ptp_get_rx_hwts,
.get_ts_info = hclge_ptp_get_ts_info,
.get_link_diagnosis_info = hclge_get_link_diagnosis_info,
+ .clean_vf_config = hclge_clean_vport_config,
};
static struct hnae3_ae_algo ae_algo = {
--
2.34.1
From: Daniel González Cabanelas <[email protected]>
[ Upstream commit 56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]
Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.
Fix it by clearing the Transport Stream Interrupt Status register.
Signed-off-by: Daniel González Cabanelas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/cx88/cx88-mpeg.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c
index 680e1e3fe89b..2c1d5137ac47 100644
--- a/drivers/media/pci/cx88/cx88-mpeg.c
+++ b/drivers/media/pci/cx88/cx88-mpeg.c
@@ -162,6 +162,9 @@ int cx8802_start_dma(struct cx8802_dev *dev,
cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET);
q->count = 0;
+ /* clear interrupt status register */
+ cx_write(MO_TS_INTSTAT, 0x1f1111);
+
/* enable irqs */
dprintk(1, "setting the interrupt mask\n");
cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
--
2.34.1
From: Ilan Peer <[email protected]>
[ Upstream commit cee04f3c3a00ffd2a2a6ed1028e0ab58a3a28d25 ]
The HE capability IE is an extension IE so remove
an irrelevant comments.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.550b95b5fca7.Ia31395e880172aefcc0a8c70ed060f84b94bdb83@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/main.c | 13 +++++--------
net/mac80211/mlme.c | 4 ----
2 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 45fb517591ee..5311c3cd3050 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1131,17 +1131,14 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
local->scan_ies_len +=
2 + sizeof(struct ieee80211_vht_cap);
- /* HE cap element is variable in size - set len to allow max size */
/*
- * TODO: 1 is added at the end of the calculation to accommodate for
- * the temporary placing of the HE capabilities IE under EXT.
- * Remove it once it is placed in the final place.
- */
- if (supp_he)
+ * HE cap element is variable in size - set len to allow max size */
+ if (supp_he) {
local->scan_ies_len +=
- 2 + sizeof(struct ieee80211_he_cap_elem) +
+ 3 + sizeof(struct ieee80211_he_cap_elem) +
sizeof(struct ieee80211_he_mcs_nss_supp) +
- IEEE80211_HE_PPE_THRES_MAX_LEN + 1;
+ IEEE80211_HE_PPE_THRES_MAX_LEN;
+ }
if (!local->ops->hw_scan) {
/* For hw_scan, driver needs to set these up. */
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6c8505edce75..8d9fe2765836 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -650,10 +650,6 @@ static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
if (!he_cap || !reg_cap)
return;
- /*
- * TODO: the 1 added is because this temporarily is under the EXTENSION
- * IE. Get rid of it when it moves.
- */
he_cap_size =
2 + 1 + sizeof(he_cap->he_cap_elem) +
ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) +
--
2.34.1
From: Trond Myklebust <[email protected]>
[ Upstream commit 6c984083ec2453dfd3fcf98f392f34500c73e3f2 ]
The use of mapping_set_error() in conjunction with calls to
filemap_check_errors() is problematic because every error gets reported
as either an EIO or an ENOSPC by filemap_check_errors() in functions
such as filemap_write_and_wait() or filemap_write_and_wait_range().
In almost all cases, we prefer to use the more nuanced wb errors.
Fixes: b8946d7bfb94 ("NFS: Revalidate the file mapping on all fatal writeback errors")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/write.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 7dce3e735fc5..0691b0b02147 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -314,7 +314,10 @@ static void nfs_mapping_set_error(struct page *page, int error)
struct address_space *mapping = page_file_mapping(page);
SetPageError(page);
- mapping_set_error(mapping, error);
+ filemap_set_wb_err(mapping, error);
+ if (mapping->host)
+ errseq_set(&mapping->host->i_sb->s_wb_err,
+ error == -ENOSPC ? -ENOSPC : -EIO);
nfs_set_pageerror(mapping);
}
--
2.34.1
From: Jing Yao <[email protected]>
[ Upstream commit f63658a59c3d439c8ad7b290f8ec270980e0f384 ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Jing Yao <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
index 4b0793abdd84..a2c7c5cb1523 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
@@ -409,7 +409,7 @@ static ssize_t dsicm_num_errors_show(struct device *dev,
if (r)
return r;
- return snprintf(buf, PAGE_SIZE, "%d\n", errors);
+ return sysfs_emit(buf, "%d\n", errors);
}
static ssize_t dsicm_hw_revision_show(struct device *dev,
@@ -439,7 +439,7 @@ static ssize_t dsicm_hw_revision_show(struct device *dev,
if (r)
return r;
- return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
+ return sysfs_emit(buf, "%02x.%02x.%02x\n", id1, id2, id3);
}
static ssize_t dsicm_store_ulps(struct device *dev,
@@ -487,7 +487,7 @@ static ssize_t dsicm_show_ulps(struct device *dev,
t = ddata->ulps_enabled;
mutex_unlock(&ddata->lock);
- return snprintf(buf, PAGE_SIZE, "%u\n", t);
+ return sysfs_emit(buf, "%u\n", t);
}
static ssize_t dsicm_store_ulps_timeout(struct device *dev,
@@ -532,7 +532,7 @@ static ssize_t dsicm_show_ulps_timeout(struct device *dev,
t = ddata->ulps_timeout;
mutex_unlock(&ddata->lock);
- return snprintf(buf, PAGE_SIZE, "%u\n", t);
+ return sysfs_emit(buf, "%u\n", t);
}
static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
--
2.34.1
From: Richard Schleich <[email protected]>
[ Upstream commit 618682b350990f8f1bee718949c4b3858711eb58 ]
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2711 on newer kernel versions.
Signed-off-by: Richard Schleich <[email protected]>
Tested-by: Stefan Wahren <[email protected]>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/bcm2711.dtsi | 50 ++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 21294f775a20..89af57482bc8 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -459,12 +459,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/100095/0003
+ * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+ * Source for d/i-cache-size
+ * https://www.raspberrypi.com/documentation/computers
+ * /processors.html#bcm2711
+ */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -473,6 +487,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -481,6 +502,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -489,6 +517,28 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/100095/0003
+ * /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+ * Source for d/i-cache-size
+ * https://www.raspberrypi.com/documentation/computers
+ * /processors.html#bcm2711
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+ cache-level = <2>;
};
};
--
2.34.1
From: Ulf Hansson <[email protected]>
commit 3dd9a926ec2308e49445f22abef149fc64e9332e upstream.
The struct device *dev, is no longer needed at various functions, let's
therefore drop it to fix the build errors/warnings.
Fixes: 7570fb41e450 ("mmc: rtsx: Let MMC core handle runtime PM")
Cc: Kai-Heng Feng <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -806,7 +806,6 @@ static void sd_request(struct work_struc
struct mmc_request *mrq = host->mrq;
struct mmc_command *cmd = mrq->cmd;
struct mmc_data *data = mrq->data;
- struct device *dev = &host->pdev->dev;
unsigned int data_size = 0;
int err;
@@ -1081,7 +1080,6 @@ static void sdmmc_set_ios(struct mmc_hos
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
- struct device *dev = &host->pdev->dev;
if (host->eject)
return;
@@ -1130,7 +1128,6 @@ static int sdmmc_get_ro(struct mmc_host
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
- struct device *dev = &host->pdev->dev;
int ro = 0;
u32 val;
@@ -1156,7 +1153,6 @@ static int sdmmc_get_cd(struct mmc_host
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
- struct device *dev = &host->pdev->dev;
int cd = 0;
u32 val;
@@ -1255,7 +1251,6 @@ static int sdmmc_switch_voltage(struct m
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
- struct device *dev = &host->pdev->dev;
int err = 0;
u8 voltage;
@@ -1308,7 +1303,6 @@ static int sdmmc_execute_tuning(struct m
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
- struct device *dev = &host->pdev->dev;
int err = 0;
if (host->eject)
From: Jammy Huang <[email protected]>
[ Upstream commit 4b732a0016853eaff35944f900b0db66f3914374 ]
Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/aspeed-video.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index debc7509c173..757a58829a51 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -151,7 +151,7 @@
#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
#define VE_MODE_DETECT_STATUS 0x098
-#define VE_MODE_DETECT_H_PIXELS GENMASK(11, 0)
+#define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0)
#define VE_MODE_DETECT_V_LINES_SHF 16
#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
#define VE_MODE_DETECT_STATUS_VSYNC BIT(28)
@@ -162,6 +162,8 @@
#define VE_SYNC_STATUS_VSYNC_SHF 16
#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
+#define VE_H_TOTAL_PIXELS 0x0A0
+
#define VE_INTERRUPT_CTRL 0x304
#define VE_INTERRUPT_STATUS 0x308
#define VE_INTERRUPT_MODE_DETECT_WD BIT(0)
@@ -765,6 +767,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
u32 src_lr_edge;
u32 src_tb_edge;
u32 sync;
+ u32 htotal;
struct v4l2_bt_timings *det = &video->detected_timings;
det->width = MIN_WIDTH;
@@ -809,6 +812,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
sync = aspeed_video_read(video, VE_SYNC_STATUS);
+ htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
VE_SRC_TB_EDGE_DET_BOT_SHF;
@@ -825,8 +829,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
VE_SRC_LR_EDGE_DET_RT_SHF;
video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
det->hfrontporch = video->frame_left;
- det->hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) -
- video->frame_right;
+ det->hbackporch = htotal - video->frame_right;
det->hsync = sync & VE_SYNC_STATUS_HSYNC;
if (video->frame_left > video->frame_right)
continue;
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit bb07af2ed2a47dc6c4d0681f275bb27d4f845465 ]
The dsi_7nm_phy_enable() disagrees with downstream for
glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update
programmed settings to match downstream driver. To remove the
possibility for such errors in future drop less_than_1500_mhz
assignment and specify settings explicitly.
Fixes: 5ac178381d26 ("drm/msm/dsi: support CPHY mode for 7nm pll/phy")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 9f7c408325ba..8cc1ef8199ac 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -866,20 +866,26 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
/* Alter PHY configurations if data rate less than 1.5GHZ*/
less_than_1500_mhz = (clk_req->bitclk_rate <= 1500000000);
- /* For C-PHY, no low power settings for lower clk rate */
- if (phy->cphy_mode)
- less_than_1500_mhz = false;
-
if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
- glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x00;
- glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 : 0x3c;
+ if (phy->cphy_mode) {
+ glbl_rescode_top_ctrl = 0x00;
+ glbl_rescode_bot_ctrl = 0x3c;
+ } else {
+ glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x00;
+ glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 : 0x3c;
+ }
glbl_str_swi_cal_sel_ctrl = 0x00;
glbl_hstx_str_ctrl_0 = 0x88;
} else {
vreg_ctrl_0 = less_than_1500_mhz ? 0x5B : 0x59;
- glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
- glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
+ if (phy->cphy_mode) {
+ glbl_str_swi_cal_sel_ctrl = 0x03;
+ glbl_hstx_str_ctrl_0 = 0x66;
+ } else {
+ glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
+ glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
+ }
glbl_rescode_top_ctrl = 0x03;
glbl_rescode_bot_ctrl = 0x3c;
}
--
2.34.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit bcfe5f76cc4051ea3f9eb5d2c8ea621641f290a5 ]
Accessing enums using integer would result in array out of bounds access
on platforms like aarch64 where sizeof(long) is 8 compared to enum size
which is 4 bytes.
Fixes: 4f692926f562 ("ASoC: codecs: lpass-rx-macro: add dapm widgets and route")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/lpass-rx-macro.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c
index fafb8265dbb3..23452900b9ae 100644
--- a/sound/soc/codecs/lpass-rx-macro.c
+++ b/sound/soc/codecs/lpass-rx-macro.c
@@ -2272,7 +2272,7 @@ static int rx_macro_mux_get(struct snd_kcontrol *kcontrol,
struct snd_soc_component *component = snd_soc_dapm_to_component(widget->dapm);
struct rx_macro *rx = snd_soc_component_get_drvdata(component);
- ucontrol->value.integer.value[0] =
+ ucontrol->value.enumerated.item[0] =
rx->rx_port_value[widget->shift];
return 0;
}
@@ -2284,7 +2284,7 @@ static int rx_macro_mux_put(struct snd_kcontrol *kcontrol,
struct snd_soc_component *component = snd_soc_dapm_to_component(widget->dapm);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
struct snd_soc_dapm_update *update = NULL;
- u32 rx_port_value = ucontrol->value.integer.value[0];
+ u32 rx_port_value = ucontrol->value.enumerated.item[0];
u32 aif_rst;
struct rx_macro *rx = snd_soc_component_get_drvdata(component);
@@ -2396,7 +2396,7 @@ static int rx_macro_get_hph_pwr_mode(struct snd_kcontrol *kcontrol,
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct rx_macro *rx = snd_soc_component_get_drvdata(component);
- ucontrol->value.integer.value[0] = rx->hph_pwr_mode;
+ ucontrol->value.enumerated.item[0] = rx->hph_pwr_mode;
return 0;
}
@@ -2406,7 +2406,7 @@ static int rx_macro_put_hph_pwr_mode(struct snd_kcontrol *kcontrol,
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct rx_macro *rx = snd_soc_component_get_drvdata(component);
- rx->hph_pwr_mode = ucontrol->value.integer.value[0];
+ rx->hph_pwr_mode = ucontrol->value.enumerated.item[0];
return 0;
}
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit 2b6dd600dd72573c23ea180b5b0b2f1813405882 ]
Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The
problem was in ubuf->pages == ZERO_PTR.
ubuf->pagecount is calculated from arguments passed from user-space. If
user creates udmabuf with list.size == 0 then ubuf->pagecount will be
also equal to zero; it causes kmalloc_array() to return ZERO_PTR.
Fix it by validating ubuf->pagecount before passing it to
kmalloc_array().
Fixes: fbb0de795078 ("Add udmabuf misc device")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma-buf/udmabuf.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c
index c57a609db75b..e7330684d3b8 100644
--- a/drivers/dma-buf/udmabuf.c
+++ b/drivers/dma-buf/udmabuf.c
@@ -190,6 +190,10 @@ static long udmabuf_create(struct miscdevice *device,
if (ubuf->pagecount > pglimit)
goto err;
}
+
+ if (!ubuf->pagecount)
+ goto err;
+
ubuf->pages = kmalloc_array(ubuf->pagecount, sizeof(*ubuf->pages),
GFP_KERNEL);
if (!ubuf->pages) {
--
2.34.1
From: Zhang Yi <[email protected]>
[ Upstream commit 50b3a818991074177a56c87124c7a7bdf5fa4f67 ]
We need to calculate the max file size accurately if the total blocks
that can address by block tree exceed the upper_limit. But this check is
not correct now, it only compute the total data blocks but missing
metadata blocks are needed. So in the case of "data blocks < upper_limit
&& total blocks > upper_limit", we will get wrong result. Fortunately,
this case could not happen in reality, but it's confused and better to
correct the computing.
bits data blocks metadatablocks upper_limit
10 16843020 66051 2147483647
11 134480396 263171 1073741823
12 1074791436 1050627 536870911 (*)
13 8594130956 4198403 268435455 (*)
14 68736258060 16785411 134217727 (*)
15 549822930956 67125251 67108863 (*)
16 4398314962956 268468227 33554431 (*)
[*] Need to calculate in depth.
Fixes: 1c2d14212b15 ("ext2: Fix underflow in ext2_max_size()")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Zhang Yi <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext2/super.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index d8d580b609ba..3d21279fe2cb 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -753,8 +753,12 @@ static loff_t ext2_max_size(int bits)
res += 1LL << (bits-2);
res += 1LL << (2*(bits-2));
res += 1LL << (3*(bits-2));
+ /* Compute how many metadata blocks are needed */
+ meta_blocks = 1;
+ meta_blocks += 1 + ppb;
+ meta_blocks += 1 + ppb + ppb * ppb;
/* Does block tree limit file size? */
- if (res < upper_limit)
+ if (res + meta_blocks <= upper_limit)
goto check_lfs;
res = upper_limit;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit e84ee1a75f944a0fe3c277aaa10c426603d2b0bc ]
Add the missing iounmap() before return from asic3_mfd_probe
in the error handling case.
Fixes: 64e8867ba809 ("mfd: tmio_mmc hardware abstraction for CNF area")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/asic3.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 8d58c8df46cf..56338f9dbd0b 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -906,14 +906,14 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
ret = mfd_add_devices(&pdev->dev, pdev->id,
&asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL);
if (ret < 0)
- goto out;
+ goto out_unmap;
}
if (mem_sdio && (irq >= 0)) {
ret = mfd_add_devices(&pdev->dev, pdev->id,
&asic3_cell_mmc, 1, mem_sdio, irq, NULL);
if (ret < 0)
- goto out;
+ goto out_unmap;
}
ret = 0;
@@ -927,8 +927,12 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
ret = mfd_add_devices(&pdev->dev, 0,
asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL);
}
+ return ret;
- out:
+out_unmap:
+ if (asic->tmio_cnf)
+ iounmap(asic->tmio_cnf);
+out:
return ret;
}
--
2.34.1
From: Athira Rajeev <[email protected]>
[ Upstream commit 0198322379c25215b2778482bf1221743a76e2b5 ]
Trace IMC (In-Memory collection counters) in powerpc is useful for
application level profiling.
For trace_imc, presently task context (task_ctx_nr) is set to
perf_hw_context. But perf_hw_context should only be used for CPU PMU.
See commit 26657848502b ("perf/core: Verify we have a single
perf_hw_context PMU").
So for trace_imc, even though it is per thread PMU, it is preferred to
use sw_context in order to be able to do application level monitoring.
Hence change the task_ctx_nr to use perf_sw_context.
Fixes: 012ae244845f ("powerpc/perf: Trace imc PMU functions")
Signed-off-by: Athira Rajeev <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
[mpe: Update subject & incorporate notes into change log, reflow comment]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/perf/imc-pmu.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index e106909ff9c3..e7583fbcc8fa 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -1457,7 +1457,11 @@ static int trace_imc_event_init(struct perf_event *event)
event->hw.idx = -1;
- event->pmu->task_ctx_nr = perf_hw_context;
+ /*
+ * There can only be a single PMU for perf_hw_context events which is assigned to
+ * core PMU. Hence use "perf_sw_context" for trace_imc.
+ */
+ event->pmu->task_ctx_nr = perf_sw_context;
event->destroy = reset_global_refc;
return 0;
}
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit e6a21a14106d9718aa4f8e115b1e474888eeba44 ]
As the possible failure of the vzalloc(), e->encoder_buf might be NULL.
Therefore, it should be better to check it in order
to guarantee the success of the initialization.
If fails, we need to free not only 'e' but also 'e->name'.
Also, if the allocation for ctx fails, we need to free 'e->encoder_buf'
else.
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/test-drivers/vidtv/vidtv_s302m.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/media/test-drivers/vidtv/vidtv_s302m.c b/drivers/media/test-drivers/vidtv/vidtv_s302m.c
index d79b65854627..4676083cee3b 100644
--- a/drivers/media/test-drivers/vidtv/vidtv_s302m.c
+++ b/drivers/media/test-drivers/vidtv/vidtv_s302m.c
@@ -455,6 +455,9 @@ struct vidtv_encoder
e->name = kstrdup(args.name, GFP_KERNEL);
e->encoder_buf = vzalloc(VIDTV_S302M_BUF_SZ);
+ if (!e->encoder_buf)
+ goto out_kfree_e;
+
e->encoder_buf_sz = VIDTV_S302M_BUF_SZ;
e->encoder_buf_offset = 0;
@@ -467,10 +470,8 @@ struct vidtv_encoder
e->is_video_encoder = false;
ctx = kzalloc(priv_sz, GFP_KERNEL);
- if (!ctx) {
- kfree(e);
- return NULL;
- }
+ if (!ctx)
+ goto out_kfree_buf;
e->ctx = ctx;
ctx->last_duration = 0;
@@ -498,6 +499,14 @@ struct vidtv_encoder
e->next = NULL;
return e;
+
+out_kfree_buf:
+ kfree(e->encoder_buf);
+
+out_kfree_e:
+ kfree(e->name);
+ kfree(e);
+ return NULL;
}
void vidtv_s302m_encoder_destroy(struct vidtv_encoder *e)
--
2.34.1
From: Fabiano Rosas <[email protected]>
[ Upstream commit b99234b918c6e36b9aa0a5b2981e86b6bd11f8e2 ]
The MMIO emulation code for vector instructions is duplicated between
VSX and VMX. When emulating VMX we should check the VMX copy size
instead of the VSX one.
Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction ...")
Signed-off-by: Fabiano Rosas <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/powerpc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index b4e6f70b97b9..ee305455bd8d 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -1507,7 +1507,7 @@ int kvmppc_handle_vmx_load(struct kvm_vcpu *vcpu,
{
enum emulation_result emulated = EMULATE_DONE;
- if (vcpu->arch.mmio_vsx_copy_nums > 2)
+ if (vcpu->arch.mmio_vmx_copy_nums > 2)
return EMULATE_FAIL;
while (vcpu->arch.mmio_vmx_copy_nums) {
@@ -1604,7 +1604,7 @@ int kvmppc_handle_vmx_store(struct kvm_vcpu *vcpu,
unsigned int index = rs & KVM_MMIO_REG_MASK;
enum emulation_result emulated = EMULATE_DONE;
- if (vcpu->arch.mmio_vsx_copy_nums > 2)
+ if (vcpu->arch.mmio_vmx_copy_nums > 2)
return EMULATE_FAIL;
vcpu->arch.io_gpr = rs;
--
2.34.1
From: Hou Wenlong <[email protected]>
[ Upstream commit ca85f002258fdac3762c57d12d5e6e401b6a41af ]
Per Intel's SDM on the "Instruction Set Reference", when
loading segment descriptor, not-present segment check should
be after all type and privilege checks. But the emulator checks
it first, then #NP is triggered instead of #GP if privilege fails
and segment is not present. Put not-present segment check after
type and privilege checks in __load_segment_descriptor().
Fixes: 38ba30ba51a00 (KVM: x86 emulator: Emulate task switch in emulator.c)
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Hou Wenlong <[email protected]>
Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/emulate.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 9a144ca8e146..4cf0938a876b 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1614,11 +1614,6 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
goto exception;
}
- if (!seg_desc.p) {
- err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
- goto exception;
- }
-
dpl = seg_desc.dpl;
switch (seg) {
@@ -1658,6 +1653,10 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
case VCPU_SREG_TR:
if (seg_desc.s || (seg_desc.type != 1 && seg_desc.type != 9))
goto exception;
+ if (!seg_desc.p) {
+ err_vec = NP_VECTOR;
+ goto exception;
+ }
old_desc = seg_desc;
seg_desc.type |= 2; /* busy */
ret = ctxt->ops->cmpxchg_emulated(ctxt, desc_addr, &old_desc, &seg_desc,
@@ -1682,6 +1681,11 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
break;
}
+ if (!seg_desc.p) {
+ err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
+ goto exception;
+ }
+
if (seg_desc.s) {
/* mark segment as accessed */
if (!(seg_desc.type & 1)) {
--
2.34.1
From: Tom Rix <[email protected]>
[ Upstream commit 33b5bc9e703383e396f275d51fc4bafa48dbae5a ]
Clang static analysis reports this representative issue
rvu_npc.c:898:15: warning: Assigned value is garbage
or undefined
req.match_id = action.match_id;
^ ~~~~~~~~~~~~~~~
The initial setting of action is conditional on
if (is_mcam_entry_enabled(...))
The later check of action.op will sometimes be garbage.
So initialize action.
Reduce setting of
*(u64 *)&action = 0x00;
to
*(u64 *)&action = 0;
Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index fbb573c40c1a..c4a46b295d40 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -605,7 +605,7 @@ void rvu_npc_install_ucast_entry(struct rvu *rvu, u16 pcifunc,
struct npc_install_flow_req req = { 0 };
struct npc_install_flow_rsp rsp = { 0 };
struct npc_mcam *mcam = &rvu->hw->mcam;
- struct nix_rx_action action;
+ struct nix_rx_action action = { 0 };
int blkaddr, index;
/* AF's and SDP VFs work in promiscuous mode */
@@ -626,7 +626,6 @@ void rvu_npc_install_ucast_entry(struct rvu *rvu, u16 pcifunc,
*(u64 *)&action = npc_get_mcam_action(rvu, mcam,
blkaddr, index);
} else {
- *(u64 *)&action = 0x00;
action.op = NIX_RX_ACTIONOP_UCAST;
action.pf_func = pcifunc;
}
@@ -657,7 +656,7 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc,
struct npc_mcam *mcam = &rvu->hw->mcam;
struct rvu_hwinfo *hw = rvu->hw;
int blkaddr, ucast_idx, index;
- struct nix_rx_action action;
+ struct nix_rx_action action = { 0 };
u64 relaxed_mask;
if (!hw->cap.nix_rx_multicast && is_cgx_vf(rvu, pcifunc))
@@ -685,14 +684,14 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc,
blkaddr, ucast_idx);
if (action.op != NIX_RX_ACTIONOP_RSS) {
- *(u64 *)&action = 0x00;
+ *(u64 *)&action = 0;
action.op = NIX_RX_ACTIONOP_UCAST;
}
/* RX_ACTION set to MCAST for CGX PF's */
if (hw->cap.nix_rx_multicast && pfvf->use_mce_list &&
is_pf_cgxmapped(rvu, rvu_get_pf(pcifunc))) {
- *(u64 *)&action = 0x00;
+ *(u64 *)&action = 0;
action.op = NIX_RX_ACTIONOP_MCAST;
pfvf = rvu_get_pfvf(rvu, pcifunc & ~RVU_PFVF_FUNC_MASK);
action.index = pfvf->promisc_mce_idx;
@@ -832,7 +831,7 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf,
struct rvu_hwinfo *hw = rvu->hw;
int blkaddr, ucast_idx, index;
u8 mac_addr[ETH_ALEN] = { 0 };
- struct nix_rx_action action;
+ struct nix_rx_action action = { 0 };
struct rvu_pfvf *pfvf;
u16 vf_func;
@@ -861,14 +860,14 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf,
blkaddr, ucast_idx);
if (action.op != NIX_RX_ACTIONOP_RSS) {
- *(u64 *)&action = 0x00;
+ *(u64 *)&action = 0;
action.op = NIX_RX_ACTIONOP_UCAST;
action.pf_func = pcifunc;
}
/* RX_ACTION set to MCAST for CGX PF's */
if (hw->cap.nix_rx_multicast && pfvf->use_mce_list) {
- *(u64 *)&action = 0x00;
+ *(u64 *)&action = 0;
action.op = NIX_RX_ACTIONOP_MCAST;
action.index = pfvf->mcast_mce_idx;
}
--
2.34.1
From: Jiasheng Jiang <[email protected]>
commit ccb4214f7f2a8b75acf493f31128e464ee1a3536 upstream.
It should be better to reverse the check on codec_dai
and returned early in order to be easier to understand.
Fixes: de2c6f98817f ("ASoC: soc-compress: prevent the potentially use of null pointer")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-compress.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -534,16 +534,19 @@ int snd_soc_new_compress(struct snd_soc_
return -EINVAL;
}
- /* check client and interface hw capabilities */
- if (codec_dai) {
- if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
- snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
- playback = 1;
- if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
- snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
- capture = 1;
+ if (!codec_dai) {
+ dev_err(rtd->card->dev, "Missing codec\n");
+ return -EINVAL;
}
+ /* check client and interface hw capabilities */
+ if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
+ playback = 1;
+ if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
+ capture = 1;
+
/*
* Compress devices are unidirectional so only one of the directions
* should be set, check for that (xor)
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 1d15d121cc2ad4d016a7dc1493132a9696f91fc5 ]
There is no reason to retry the operation if a session error had
occurred in such case result structure isn't filled out.
Fixes: dff58530c4ca ("NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION")
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4proc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 53be03681f69..dababa6cf3f4 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -8341,6 +8341,7 @@ nfs4_bind_one_conn_to_session_done(struct rpc_task *task, void *calldata)
case -NFS4ERR_DEADSESSION:
nfs4_schedule_session_recovery(clp->cl_session,
task->tk_status);
+ return;
}
if (args->dir == NFS4_CDFC4_FORE_OR_BOTH &&
res->dir != NFS4_CDFS4_BOTH) {
--
2.34.1
From: Nilesh Javali <[email protected]>
commit 14cb838d245ae0d523b2f7804af5a02c22e79f5a upstream.
Fix smatch-reported warning message:
drivers/scsi/qla2xxx/qla_target.c:3324 qlt_xmit_response() warn: missing error
code 'res'
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4a8f71014b4d ("scsi: qla2xxx: Fix unmap of already freed sgl")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_target.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3318,6 +3318,7 @@ int qlt_xmit_response(struct qla_tgt_cmd
"RESET-RSP online/active/old-count/new-count = %d/%d/%d/%d.\n",
vha->flags.online, qla2x00_reset_active(vha),
cmd->reset_count, qpair->chip_reset);
+ res = 0;
goto out_unmap_unlock;
}
From: Damien Le Moal <[email protected]>
[ Upstream commit aa028141ab0bc62c44a84d42f09db35d82df82a2 ]
In the pm8001_chip_sata_req() and pm80xx_chip_sata_req() functions, all
tasks with a DMA direction of DMA_NONE (no data transfer) are initialized
using the ATAP value 0x04. However, NCQ NON DATA commands, while being
DMA_NONE commands are NCQ commands and need to be initialized using the
value 0x07 for ATAP, similarly to other NCQ commands.
Make sure that NCQ NON DATA command tasks are initialized similarly to
other NCQ commands by also testing the task "use_ncq" field in addition to
the DMA direction. While at it, reorganize the code into a chain of if -
else if - else to avoid useless affectations and debug messages.
Link: https://lore.kernel.org/r/[email protected]
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 14 +++++++-------
drivers/scsi/pm8001/pm80xx_hwi.c | 13 ++++++-------
2 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index bad0c8b8cbe1..e9c77c945752 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4278,22 +4278,22 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
u32 opc = OPC_INB_SATA_HOST_OPSTART;
memset(&sata_cmd, 0, sizeof(sata_cmd));
circularQ = &pm8001_ha->inbnd_q_tbl[0];
- if (task->data_dir == DMA_NONE) {
+
+ if (task->data_dir == DMA_NONE && !task->ata_task.use_ncq) {
ATAP = 0x04; /* no data*/
pm8001_dbg(pm8001_ha, IO, "no data\n");
} else if (likely(!task->ata_task.device_control_reg_update)) {
- if (task->ata_task.dma_xfer) {
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.class != ATA_DEV_ATAPI) {
+ ATAP = 0x07; /* FPDMA */
+ pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
+ } else if (task->ata_task.dma_xfer) {
ATAP = 0x06; /* DMA */
pm8001_dbg(pm8001_ha, IO, "DMA\n");
} else {
ATAP = 0x05; /* PIO*/
pm8001_dbg(pm8001_ha, IO, "PIO\n");
}
- if (task->ata_task.use_ncq &&
- dev->sata_dev.class != ATA_DEV_ATAPI) {
- ATAP = 0x07; /* FPDMA */
- pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
- }
}
if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index c6e4812e6591..043a2cc4d4de 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4552,22 +4552,21 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
q_index = (u32) (cpu_id) % (pm8001_ha->max_q_num);
circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
- if (task->data_dir == DMA_NONE) {
+ if (task->data_dir == DMA_NONE && !task->ata_task.use_ncq) {
ATAP = 0x04; /* no data*/
pm8001_dbg(pm8001_ha, IO, "no data\n");
} else if (likely(!task->ata_task.device_control_reg_update)) {
- if (task->ata_task.dma_xfer) {
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.class != ATA_DEV_ATAPI) {
+ ATAP = 0x07; /* FPDMA */
+ pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
+ } else if (task->ata_task.dma_xfer) {
ATAP = 0x06; /* DMA */
pm8001_dbg(pm8001_ha, IO, "DMA\n");
} else {
ATAP = 0x05; /* PIO*/
pm8001_dbg(pm8001_ha, IO, "PIO\n");
}
- if (task->ata_task.use_ncq &&
- dev->sata_dev.class != ATA_DEV_ATAPI) {
- ATAP = 0x07; /* FPDMA */
- pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
- }
}
if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
--
2.34.1
From: Guangbin Huang <[email protected]>
commit 7ed258f12ec5ce855f15cdfb5710361dc82fe899 upstream.
When user delete vlan 0, as driver will not delete vlan 0 for hardware in
function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should
not be deleted.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10595,11 +10595,11 @@ int hclge_set_vlan_filter(struct hnae3_h
}
if (!ret) {
- if (is_kill)
- hclge_rm_vport_vlan_table(vport, vlan_id, false);
- else
+ if (!is_kill)
hclge_add_vport_vlan_table(vport, vlan_id,
writen_to_tbl);
+ else if (is_kill && vlan_id != 0)
+ hclge_rm_vport_vlan_table(vport, vlan_id, false);
} else if (is_kill) {
/* when remove hw vlan filter failed, record the vlan id,
* and try to remove it from hw later, to be consistence
From: Nishanth Menon <[email protected]>
[ Upstream commit ffb5c099aaa13ab7f73c29ea6ae26bce8d7575ae ]
Add MODULE_DEVICE_TABLE to the device tree table to create required
aliases needed for module to be loaded with device tree based platform.
Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver")
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Tomi Valkeinen <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/cdns-dsi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/cdns-dsi.c b/drivers/gpu/drm/bridge/cdns-dsi.c
index e6e331071a00..dd57b104aec3 100644
--- a/drivers/gpu/drm/bridge/cdns-dsi.c
+++ b/drivers/gpu/drm/bridge/cdns-dsi.c
@@ -1286,6 +1286,7 @@ static const struct of_device_id cdns_dsi_of_match[] = {
{ .compatible = "cdns,dsi" },
{ },
};
+MODULE_DEVICE_TABLE(of, cdns_dsi_of_match);
static struct platform_driver cdns_dsi_platform_driver = {
.probe = cdns_dsi_drm_probe,
--
2.34.1
From: Jing Yao <[email protected]>
[ Upstream commit c07a039cbb96748f54c02995bae8131cc9a73b0a ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Jing Yao <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
index afac1d9445aa..57b7d1f49096 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
@@ -169,7 +169,7 @@ static ssize_t tpo_td043_vmirror_show(struct device *dev,
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
+ return sysfs_emit(buf, "%d\n", ddata->vmirror);
}
static ssize_t tpo_td043_vmirror_store(struct device *dev,
@@ -199,7 +199,7 @@ static ssize_t tpo_td043_mode_show(struct device *dev,
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
+ return sysfs_emit(buf, "%d\n", ddata->mode);
}
static ssize_t tpo_td043_mode_store(struct device *dev,
--
2.34.1
From: Casey Schaufler <[email protected]>
[ Upstream commit ecff30575b5ad0eda149aadad247b7f75411fd47 ]
The usual LSM hook "bail on fail" scheme doesn't work for cases where
a security module may return an error code indicating that it does not
recognize an input. In this particular case Smack sees a mount option
that it recognizes, and returns 0. A call to a BPF hook follows, which
returns -ENOPARAM, which confuses the caller because Smack has processed
its data.
The SELinux hook incorrectly returns 1 on success. There was a time
when this was correct, however the current expectation is that it
return 0 on success. This is repaired.
Reported-by: [email protected]
Signed-off-by: Casey Schaufler <[email protected]>
Acked-by: James Morris <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/security.c | 17 +++++++++++++++--
security/selinux/hooks.c | 5 ++---
2 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/security/security.c b/security/security.c
index 67264cb08fb3..da631339e969 100644
--- a/security/security.c
+++ b/security/security.c
@@ -884,9 +884,22 @@ int security_fs_context_dup(struct fs_context *fc, struct fs_context *src_fc)
return call_int_hook(fs_context_dup, 0, fc, src_fc);
}
-int security_fs_context_parse_param(struct fs_context *fc, struct fs_parameter *param)
+int security_fs_context_parse_param(struct fs_context *fc,
+ struct fs_parameter *param)
{
- return call_int_hook(fs_context_parse_param, -ENOPARAM, fc, param);
+ struct security_hook_list *hp;
+ int trc;
+ int rc = -ENOPARAM;
+
+ hlist_for_each_entry(hp, &security_hook_heads.fs_context_parse_param,
+ list) {
+ trc = hp->hook.fs_context_parse_param(fc, param);
+ if (trc == 0)
+ rc = 0;
+ else if (trc != -ENOPARAM)
+ return trc;
+ }
+ return rc;
}
int security_sb_alloc(struct super_block *sb)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index f3c8acf45ed9..9a89e456d378 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2915,10 +2915,9 @@ static int selinux_fs_context_parse_param(struct fs_context *fc,
return opt;
rc = selinux_add_opt(opt, param->string, &fc->security);
- if (!rc) {
+ if (!rc)
param->string = NULL;
- rc = 1;
- }
+
return rc;
}
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit 1e0505a5a7a2fea243f8e6d7e13fcde65f9e41bc ]
DP audio enablement code which is comparing intf_type,
DRM_MODE_ENCODER_TMDS (= 2) with DRM_MODE_CONNECTOR_DisplayPort (= 10).
Which would never succeed. Fix it to check for DRM_MODE_ENCODER_TMDS.
Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Reviewed-by: Abhinav Kumar <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 0e9d3fa1544b..6bde3e234ec8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1107,7 +1107,7 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
}
- if (dpu_enc->disp_info.intf_type == DRM_MODE_CONNECTOR_DisplayPort &&
+ if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_TMDS &&
dpu_enc->cur_master->hw_mdptop &&
dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select)
dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select(
--
2.34.1
From: David Stevens <[email protected]>
commit 9b49bbc2c4dfd0431bf7ff4e862171189cf94b7e upstream.
Fold the _swiotlb helper functions into the respective _page functions,
since recent fixes have moved all logic from the _page functions to the
_swiotlb functions.
Signed-off-by: David Stevens <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Cc: Mario Limonciello <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/dma-iommu.c | 135 ++++++++++++++++++++--------------------------
1 file changed, 59 insertions(+), 76 deletions(-)
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -510,26 +510,6 @@ static void __iommu_dma_unmap(struct dev
iommu_dma_free_iova(cookie, dma_addr, size, &iotlb_gather);
}
-static void __iommu_dma_unmap_swiotlb(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction dir,
- unsigned long attrs)
-{
- struct iommu_domain *domain = iommu_get_dma_domain(dev);
- phys_addr_t phys;
-
- phys = iommu_iova_to_phys(domain, dma_addr);
- if (WARN_ON(!phys))
- return;
-
- if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && !dev_is_dma_coherent(dev))
- arch_sync_dma_for_cpu(phys, size, dir);
-
- __iommu_dma_unmap(dev, dma_addr, size);
-
- if (unlikely(is_swiotlb_buffer(dev, phys)))
- swiotlb_tbl_unmap_single(dev, phys, size, dir, attrs);
-}
-
static dma_addr_t __iommu_dma_map(struct device *dev, phys_addr_t phys,
size_t size, int prot, u64 dma_mask)
{
@@ -556,55 +536,6 @@ static dma_addr_t __iommu_dma_map(struct
return iova + iova_off;
}
-static dma_addr_t __iommu_dma_map_swiotlb(struct device *dev, phys_addr_t phys,
- size_t org_size, dma_addr_t dma_mask, bool coherent,
- enum dma_data_direction dir, unsigned long attrs)
-{
- int prot = dma_info_to_prot(dir, coherent, attrs);
- struct iommu_domain *domain = iommu_get_dma_domain(dev);
- struct iommu_dma_cookie *cookie = domain->iova_cookie;
- struct iova_domain *iovad = &cookie->iovad;
- size_t aligned_size = org_size;
- void *padding_start;
- size_t padding_size;
- dma_addr_t iova;
-
- /*
- * If both the physical buffer start address and size are
- * page aligned, we don't need to use a bounce page.
- */
- if (IS_ENABLED(CONFIG_SWIOTLB) && dev_is_untrusted(dev) &&
- iova_offset(iovad, phys | org_size)) {
- aligned_size = iova_align(iovad, org_size);
- phys = swiotlb_tbl_map_single(dev, phys, org_size,
- aligned_size, dir, attrs);
-
- if (phys == DMA_MAPPING_ERROR)
- return DMA_MAPPING_ERROR;
-
- /* Cleanup the padding area. */
- padding_start = phys_to_virt(phys);
- padding_size = aligned_size;
-
- if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
- (dir == DMA_TO_DEVICE ||
- dir == DMA_BIDIRECTIONAL)) {
- padding_start += org_size;
- padding_size -= org_size;
- }
-
- memset(padding_start, 0, padding_size);
- }
-
- if (!coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
- arch_sync_dma_for_device(phys, org_size, dir);
-
- iova = __iommu_dma_map(dev, phys, aligned_size, prot, dma_mask);
- if (iova == DMA_MAPPING_ERROR && is_swiotlb_buffer(dev, phys))
- swiotlb_tbl_unmap_single(dev, phys, org_size, dir, attrs);
- return iova;
-}
-
static void __iommu_dma_free_pages(struct page **pages, int count)
{
while (count--)
@@ -866,15 +797,68 @@ static dma_addr_t iommu_dma_map_page(str
{
phys_addr_t phys = page_to_phys(page) + offset;
bool coherent = dev_is_dma_coherent(dev);
+ int prot = dma_info_to_prot(dir, coherent, attrs);
+ struct iommu_domain *domain = iommu_get_dma_domain(dev);
+ struct iommu_dma_cookie *cookie = domain->iova_cookie;
+ struct iova_domain *iovad = &cookie->iovad;
+ size_t aligned_size = size;
+ dma_addr_t iova, dma_mask = dma_get_mask(dev);
+
+ /*
+ * If both the physical buffer start address and size are
+ * page aligned, we don't need to use a bounce page.
+ */
+ if (IS_ENABLED(CONFIG_SWIOTLB) && dev_is_untrusted(dev) &&
+ iova_offset(iovad, phys | size)) {
+ void *padding_start;
+ size_t padding_size;
+
+ aligned_size = iova_align(iovad, size);
+ phys = swiotlb_tbl_map_single(dev, phys, size,
+ aligned_size, dir, attrs);
+
+ if (phys == DMA_MAPPING_ERROR)
+ return DMA_MAPPING_ERROR;
- return __iommu_dma_map_swiotlb(dev, phys, size, dma_get_mask(dev),
- coherent, dir, attrs);
+ /* Cleanup the padding area. */
+ padding_start = phys_to_virt(phys);
+ padding_size = aligned_size;
+
+ if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
+ (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) {
+ padding_start += size;
+ padding_size -= size;
+ }
+
+ memset(padding_start, 0, padding_size);
+ }
+
+ if (!coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+ arch_sync_dma_for_device(phys, size, dir);
+
+ iova = __iommu_dma_map(dev, phys, aligned_size, prot, dma_mask);
+ if (iova == DMA_MAPPING_ERROR && is_swiotlb_buffer(dev, phys))
+ swiotlb_tbl_unmap_single(dev, phys, size, dir, attrs);
+ return iova;
}
static void iommu_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir, unsigned long attrs)
{
- __iommu_dma_unmap_swiotlb(dev, dma_handle, size, dir, attrs);
+ struct iommu_domain *domain = iommu_get_dma_domain(dev);
+ phys_addr_t phys;
+
+ phys = iommu_iova_to_phys(domain, dma_handle);
+ if (WARN_ON(!phys))
+ return;
+
+ if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && !dev_is_dma_coherent(dev))
+ arch_sync_dma_for_cpu(phys, size, dir);
+
+ __iommu_dma_unmap(dev, dma_handle, size);
+
+ if (unlikely(is_swiotlb_buffer(dev, phys)))
+ swiotlb_tbl_unmap_single(dev, phys, size, dir, attrs);
}
/*
@@ -959,7 +943,7 @@ static void iommu_dma_unmap_sg_swiotlb(s
int i;
for_each_sg(sg, s, nents, i)
- __iommu_dma_unmap_swiotlb(dev, sg_dma_address(s),
+ iommu_dma_unmap_page(dev, sg_dma_address(s),
sg_dma_len(s), dir, attrs);
}
@@ -970,9 +954,8 @@ static int iommu_dma_map_sg_swiotlb(stru
int i;
for_each_sg(sg, s, nents, i) {
- sg_dma_address(s) = __iommu_dma_map_swiotlb(dev, sg_phys(s),
- s->length, dma_get_mask(dev),
- dev_is_dma_coherent(dev), dir, attrs);
+ sg_dma_address(s) = iommu_dma_map_page(dev, sg_page(s),
+ s->offset, s->length, dir, attrs);
if (sg_dma_address(s) == DMA_MAPPING_ERROR)
goto out_unmap;
sg_dma_len(s) = s->length;
From: Phil Sutter <[email protected]>
[ Upstream commit 31d0bb9763efad30377505f3467f958d1ebe1e3d ]
The function sets the pernet boolean to avoid the spurious warning from
nf_ct_lookup_helper() when assigning conntrack helpers via nftables.
Fixes: 1a64edf54f55 ("netfilter: nft_ct: add helper set support")
Signed-off-by: Phil Sutter <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/netfilter/nf_conntrack_helper.h | 1 +
net/netfilter/nf_conntrack_helper.c | 6 ++++++
net/netfilter/nft_ct.c | 3 +++
3 files changed, 10 insertions(+)
diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h
index 37f0fbefb060..9939c366f720 100644
--- a/include/net/netfilter/nf_conntrack_helper.h
+++ b/include/net/netfilter/nf_conntrack_helper.h
@@ -177,4 +177,5 @@ void nf_nat_helper_unregister(struct nf_conntrack_nat_helper *nat);
int nf_nat_helper_try_module_get(const char *name, u16 l3num,
u8 protonum);
void nf_nat_helper_put(struct nf_conntrack_helper *helper);
+void nf_ct_set_auto_assign_helper_warned(struct net *net);
#endif /*_NF_CONNTRACK_HELPER_H*/
diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c
index ae4488a13c70..ceb38a7b37cb 100644
--- a/net/netfilter/nf_conntrack_helper.c
+++ b/net/netfilter/nf_conntrack_helper.c
@@ -556,6 +556,12 @@ static const struct nf_ct_ext_type helper_extend = {
.id = NF_CT_EXT_HELPER,
};
+void nf_ct_set_auto_assign_helper_warned(struct net *net)
+{
+ nf_ct_pernet(net)->auto_assign_helper_warned = true;
+}
+EXPORT_SYMBOL_GPL(nf_ct_set_auto_assign_helper_warned);
+
void nf_conntrack_helper_pernet_init(struct net *net)
{
struct nf_conntrack_net *cnet = nf_ct_pernet(net);
diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c
index 99b1de14ff7e..54ecb9fbf2de 100644
--- a/net/netfilter/nft_ct.c
+++ b/net/netfilter/nft_ct.c
@@ -1040,6 +1040,9 @@ static int nft_ct_helper_obj_init(const struct nft_ctx *ctx,
if (err < 0)
goto err_put_helper;
+ /* Avoid the bogus warning, helper will be assigned after CT init */
+ nf_ct_set_auto_assign_helper_warned(ctx->net);
+
return 0;
err_put_helper:
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit 6dba29537c0f639b482bd8f8bbd50ab4ae74b48d ]
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <[email protected]>
Suggested-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Tested-by: Kiran Bhandare <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index 48f5319a3d41..3f27a8ebe2ec 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -243,19 +243,25 @@ bool i40e_alloc_rx_buffers_zc(struct i40e_ring *rx_ring, u16 count)
static struct sk_buff *i40e_construct_skb_zc(struct i40e_ring *rx_ring,
struct xdp_buff *xdp)
{
+ unsigned int totalsize = xdp->data_end - xdp->data_meta;
unsigned int metasize = xdp->data - xdp->data_meta;
- unsigned int datasize = xdp->data_end - xdp->data;
struct sk_buff *skb;
+ net_prefetch(xdp->data_meta);
+
/* allocate a skb to store the frags */
- skb = __napi_alloc_skb(&rx_ring->q_vector->napi, datasize,
+ skb = __napi_alloc_skb(&rx_ring->q_vector->napi, totalsize,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
goto out;
- memcpy(__skb_put(skb, datasize), xdp->data, datasize);
- if (metasize)
+ memcpy(__skb_put(skb, totalsize), xdp->data_meta,
+ ALIGN(totalsize, sizeof(long)));
+
+ if (metasize) {
skb_metadata_set(skb, metasize);
+ __skb_pull(skb, metasize);
+ }
out:
xsk_buff_free(xdp);
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 0c1b56df451716ba207bbf59f303473643eee4fd ]
Any registered clk_core structure can have a NULL pointer in its dev
field. While never actually documented, this is evidenced by the wide
usage of clk_register and clk_hw_register with a NULL device pointer,
and the fact that the core of_clk_hw_register() function also passes a
NULL device pointer.
A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that
case will result in a NULL pointer derefence when it calls dev_name() on
that NULL device pointer.
Add a test for this case and use NULL as the dev_id if the device
pointer is NULL.
Fixes: 30d6f8c15d2c ("clk: add api to get clk consumer from clk_hw")
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index ac11cefc3191..32fd2853e8b2 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3730,8 +3730,9 @@ struct clk *clk_hw_create_clk(struct device *dev, struct clk_hw *hw,
struct clk *clk_hw_get_clk(struct clk_hw *hw, const char *con_id)
{
struct device *dev = hw->core->dev;
+ const char *name = dev ? dev_name(dev) : NULL;
- return clk_hw_create_clk(dev, hw, dev_name(dev), con_id);
+ return clk_hw_create_clk(dev, hw, name, con_id);
}
EXPORT_SYMBOL(clk_hw_get_clk);
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
[ Upstream commit 8bed4ed5aa3431085d9d27afc35d684856460eda ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes: 631c53478973d ("clk: Add CLPS711X clk driver")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-clps711x.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/clk-clps711x.c b/drivers/clk/clk-clps711x.c
index a2c6486ef170..f8417ee2961a 100644
--- a/drivers/clk/clk-clps711x.c
+++ b/drivers/clk/clk-clps711x.c
@@ -28,11 +28,13 @@ static const struct clk_div_table spi_div_table[] = {
{ .val = 1, .div = 8, },
{ .val = 2, .div = 2, },
{ .val = 3, .div = 1, },
+ { /* sentinel */ }
};
static const struct clk_div_table timer_div_table[] = {
{ .val = 0, .div = 256, },
{ .val = 1, .div = 1, },
+ { /* sentinel */ }
};
struct clps711x_clk {
--
2.34.1
From: Mustafa Ismail <[email protected]>
[ Upstream commit 17850f2b0b4b806e47cc44df94186bfc2cdd490b ]
The PD id is masked with 0x7fff, while PD can be 18 bits for GEN2 HW.
Remove the masking as it should not be needed and can cause incorrect PD
id to be used.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mustafa Ismail <[email protected]>
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/irdma/verbs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c
index 8bbc4620a97a..4a6fdd5c09e3 100644
--- a/drivers/infiniband/hw/irdma/verbs.c
+++ b/drivers/infiniband/hw/irdma/verbs.c
@@ -2506,7 +2506,7 @@ static int irdma_dealloc_mw(struct ib_mw *ibmw)
cqp_info = &cqp_request->info;
info = &cqp_info->in.u.dealloc_stag.info;
memset(info, 0, sizeof(*info));
- info->pd_id = iwpd->sc_pd.pd_id & 0x00007fff;
+ info->pd_id = iwpd->sc_pd.pd_id;
info->stag_idx = ibmw->rkey >> IRDMA_CQPSQ_STAG_IDX_S;
info->mr = false;
cqp_info->cqp_cmd = IRDMA_OP_DEALLOC_STAG;
@@ -3018,7 +3018,7 @@ static int irdma_dereg_mr(struct ib_mr *ib_mr, struct ib_udata *udata)
cqp_info = &cqp_request->info;
info = &cqp_info->in.u.dealloc_stag.info;
memset(info, 0, sizeof(*info));
- info->pd_id = iwpd->sc_pd.pd_id & 0x00007fff;
+ info->pd_id = iwpd->sc_pd.pd_id;
info->stag_idx = ib_mr->rkey >> IRDMA_CQPSQ_STAG_IDX_S;
info->mr = true;
if (iwpbl->pbl_allocated)
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit e45ac7831ff3e2934d58cce319c17c8ec763c95c ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.
Fixes: 4e28491a7a19 ("ASoC: mediatek: mt8192-mt6359: fix device_node leak")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c b/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
index ab449d0e4e9b..c1d225b49851 100644
--- a/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
+++ b/sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c
@@ -1116,8 +1116,10 @@ static int mt8192_mt6359_dev_probe(struct platform_device *pdev)
}
card = (struct snd_soc_card *)of_device_get_match_data(&pdev->dev);
- if (!card)
- return -EINVAL;
+ if (!card) {
+ ret = -EINVAL;
+ goto put_platform_node;
+ }
card->dev = &pdev->dev;
hdmi_codec = of_parse_phandle(pdev->dev.of_node,
@@ -1159,20 +1161,24 @@ static int mt8192_mt6359_dev_probe(struct platform_device *pdev)
}
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
+ if (!priv) {
+ ret = -ENOMEM;
+ goto put_hdmi_codec;
+ }
snd_soc_card_set_drvdata(card, priv);
ret = mt8192_afe_gpio_init(&pdev->dev);
if (ret) {
dev_err(&pdev->dev, "init gpio error %d\n", ret);
- return ret;
+ goto put_hdmi_codec;
}
ret = devm_snd_soc_register_card(&pdev->dev, card);
- of_node_put(platform_node);
+put_hdmi_codec:
of_node_put(hdmi_codec);
+put_platform_node:
+ of_node_put(platform_node);
return ret;
}
--
2.34.1
From: Shannon Nelson <[email protected]>
[ Upstream commit bc0bf9de6f48268f4ee59e57fb42ac751be3ecda ]
Sparse seems to have gotten a little more picky lately and
we need to revisit this bit of code to make sparse happy.
warning: incorrect type in initializer (different address spaces)
expected union ionic_dev_cmd_regs *regs
got union ionic_dev_cmd_regs [noderef] __iomem *dev_cmd_regs
warning: incorrect type in argument 2 (different address spaces)
expected void [noderef] __iomem *
got unsigned int *
warning: incorrect type in argument 1 (different address spaces)
expected void volatile [noderef] __iomem *
got union ionic_dev_cmd *
Fixes: d701ec326a31 ("ionic: clean up sparse complaints")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/pensando/ionic/ionic_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_main.c b/drivers/net/ethernet/pensando/ionic/ionic_main.c
index 6f07bf509efe..f4af760cfa73 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_main.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_main.c
@@ -328,10 +328,10 @@ int ionic_adminq_post_wait(struct ionic_lif *lif, struct ionic_admin_ctx *ctx)
static void ionic_dev_cmd_clean(struct ionic *ionic)
{
- union __iomem ionic_dev_cmd_regs *regs = ionic->idev.dev_cmd_regs;
+ struct ionic_dev *idev = &ionic->idev;
- iowrite32(0, ®s->doorbell);
- memset_io(®s->cmd, 0, sizeof(regs->cmd));
+ iowrite32(0, &idev->dev_cmd_regs->doorbell);
+ memset_io(&idev->dev_cmd_regs->cmd, 0, sizeof(idev->dev_cmd_regs->cmd));
}
int ionic_dev_cmd_wait(struct ionic *ionic, unsigned long max_seconds)
--
2.34.1
From: Kuogee Hsieh <[email protected]>
[ Upstream commit 5e602f5156910c7b19661699896cb6e3fb94fab9 ]
DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.
The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum and hit a NULL pointer dereference error because the
connector pointer is never assigned.
Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()
Changes in V3:
-- remove unhelpful kernel crash trace commit text
-- remove renaming dp_display parameter to dp
Changes in V4:
-- add more details to commit text
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 7948fe12d47 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read")
Signee-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_display.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index a0392e4d8134..d5198b435638 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1442,6 +1442,7 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
struct drm_encoder *encoder)
{
struct msm_drm_private *priv;
+ struct dp_display_private *dp_priv;
int ret;
if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
@@ -1450,6 +1451,8 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
priv = dev->dev_private;
dp_display->drm_dev = dev;
+ dp_priv = container_of(dp_display, struct dp_display_private, dp_display);
+
ret = dp_display_request_irq(dp_display);
if (ret) {
DRM_ERROR("request_irq failed, ret=%d\n", ret);
@@ -1467,6 +1470,8 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
return ret;
}
+ dp_priv->panel->connector = dp_display->connector;
+
priv->connectors[priv->num_connectors++] = dp_display->connector;
return 0;
}
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit 84842911322fc6a02a03ab9e728a48c691fe3efd ]
Although kptr_restrict is set to 0 and the kernel is booted with
no_hash_pointers parameter, the content of /proc/vmallocinfo is
lacking the real addresses.
/ # cat /proc/vmallocinfo
0x(ptrval)-0x(ptrval) 8192 load_module+0xc0c/0x2c0c pages=1 vmalloc
0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc
0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc
0x(ptrval)-0x(ptrval) 8192 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap
0x(ptrval)-0x(ptrval) 12288 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap
...
According to the documentation for /proc/sys/kernel/, %pK is
equivalent to %p when kptr_restrict is set to 0.
Fixes: 5ead723a20e0 ("lib/vsprintf: no_hash_pointers prints all addresses as unhashed")
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/107476128e59bff11a309b5bf7579a1753a41aca.1645087605.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
.../admin-guide/kernel-parameters.txt | 3 +-
lib/vsprintf.c | 36 +++++++++++--------
2 files changed, 22 insertions(+), 17 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index ed55ea20352b..bb25aae69860 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3452,8 +3452,7 @@
difficult since unequal pointers can no longer be
compared. However, if this command-line option is
specified, then all normal pointers will have their true
- value printed. Pointers printed via %pK may still be
- hashed. This option should only be specified when
+ value printed. This option should only be specified when
debugging the kernel. Please do not use on production
kernels.
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 0621bbb20e0f..a3b73f28b7a9 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -54,6 +54,10 @@
#include <linux/string_helpers.h>
#include "kstrtox.h"
+/* Disable pointer hashing if requested */
+bool no_hash_pointers __ro_after_init;
+EXPORT_SYMBOL_GPL(no_hash_pointers);
+
static noinline unsigned long long simple_strntoull(const char *startp, size_t max_chars, char **endp, unsigned int base)
{
const char *cp;
@@ -848,6 +852,19 @@ static char *ptr_to_id(char *buf, char *end, const void *ptr,
return pointer_string(buf, end, (const void *)hashval, spec);
}
+static char *default_pointer(char *buf, char *end, const void *ptr,
+ struct printf_spec spec)
+{
+ /*
+ * default is to _not_ leak addresses, so hash before printing,
+ * unless no_hash_pointers is specified on the command line.
+ */
+ if (unlikely(no_hash_pointers))
+ return pointer_string(buf, end, ptr, spec);
+
+ return ptr_to_id(buf, end, ptr, spec);
+}
+
int kptr_restrict __read_mostly;
static noinline_for_stack
@@ -857,7 +874,7 @@ char *restricted_pointer(char *buf, char *end, const void *ptr,
switch (kptr_restrict) {
case 0:
/* Handle as %p, hash and do _not_ leak addresses. */
- return ptr_to_id(buf, end, ptr, spec);
+ return default_pointer(buf, end, ptr, spec);
case 1: {
const struct cred *cred;
@@ -2226,10 +2243,6 @@ char *fwnode_string(char *buf, char *end, struct fwnode_handle *fwnode,
return widen_string(buf, buf - buf_start, end, spec);
}
-/* Disable pointer hashing if requested */
-bool no_hash_pointers __ro_after_init;
-EXPORT_SYMBOL_GPL(no_hash_pointers);
-
int __init no_hash_pointers_enable(char *str)
{
if (no_hash_pointers)
@@ -2458,7 +2471,7 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr,
case 'e':
/* %pe with a non-ERR_PTR gets treated as plain %p */
if (!IS_ERR(ptr))
- break;
+ return default_pointer(buf, end, ptr, spec);
return err_ptr(buf, end, ptr, spec);
case 'u':
case 'k':
@@ -2468,16 +2481,9 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr,
default:
return error_string(buf, end, "(einval)", spec);
}
+ default:
+ return default_pointer(buf, end, ptr, spec);
}
-
- /*
- * default is to _not_ leak addresses, so hash before printing,
- * unless no_hash_pointers is specified on the command line.
- */
- if (unlikely(no_hash_pointers))
- return pointer_string(buf, end, ptr, spec);
- else
- return ptr_to_id(buf, end, ptr, spec);
}
/*
--
2.34.1
From: Hector Martin <[email protected]>
commit 5e90f0f3ead014867dade7a22f93958119f5efab upstream.
This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that
the CLM blob is released in the device remove path.
Fixes: 82f93cf46d60 ("brcmfmac: get chip's default RAM info during PCIe setup")
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Cc: [email protected]
Signed-off-by: Hector Martin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1777,6 +1777,8 @@ static void brcmf_pcie_setup(struct devi
ret = brcmf_chip_get_raminfo(devinfo->ci);
if (ret) {
brcmf_err(bus, "Failed to get RAM info\n");
+ release_firmware(fw);
+ brcmf_fw_nvram_free(nvram);
goto fail;
}
From: Pali Rohár <[email protected]>
[ Upstream commit 805dfc18dd3d4dd97a987d4406593b5a225b1253 ]
In advk_pcie_handle_msi() it is expected that when bit i in the W1C
register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is
updated to contain the MSI number corresponding to index i.
Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG
always contains the number of the last received MSI, overall.
Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt
number. Since Aardvark already forbids more than 32 interrupts and uses
own allocated hwirq numbers, the msi_idx already corresponds to the
received MSI number.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index b2217e2b3efd..7aa6d6336223 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1381,7 +1381,6 @@ static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)
static void advk_pcie_handle_msi(struct advk_pcie *pcie)
{
u32 msi_val, msi_mask, msi_status, msi_idx;
- u16 msi_data;
msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
msi_val = advk_readl(pcie, PCIE_MSI_STATUS_REG);
@@ -1391,13 +1390,9 @@ static void advk_pcie_handle_msi(struct advk_pcie *pcie)
if (!(BIT(msi_idx) & msi_status))
continue;
- /*
- * msi_idx contains bits [4:0] of the msi_data and msi_data
- * contains 16bit MSI interrupt number
- */
advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
- msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & PCIE_MSI_DATA_MASK;
- generic_handle_irq(msi_data);
+ if (generic_handle_domain_irq(pcie->msi_inner_domain, msi_idx) == -EINVAL)
+ dev_err_ratelimited(&pcie->pdev->dev, "unexpected MSI 0x%02x\n", msi_idx);
}
advk_writel(pcie, PCIE_ISR0_MSI_INT_PENDING,
--
2.34.1
From: Saurav Kashyap <[email protected]>
commit 49b729f58e7a98a006a8a0c1dcca8a1a4f58d2a8 upstream.
This done routine will delete the timer and check for its return value and
decrease the reference count accordingly. This prevents boot hangs reported
after commit 31e6cdbe0eae ("scsi: qla2xxx: Implement ref count for SRB")
was merged.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 31e6cdbe0eae ("scsi: qla2xxx: Implement ref count for SRB")
Reported-by: Ewan Milne <[email protected]>
Tested-by: Ewan D. Milne <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_iocb.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2560,6 +2560,20 @@ qla24xx_tm_iocb(srb_t *sp, struct tsk_mg
}
}
+static void
+qla2x00_async_done(struct srb *sp, int res)
+{
+ if (del_timer(&sp->u.iocb_cmd.timer)) {
+ /*
+ * Successfully cancelled the timeout handler
+ * ref: TMR
+ */
+ if (kref_put(&sp->cmd_kref, qla2x00_sp_release))
+ return;
+ }
+ sp->async_done(sp, res);
+}
+
void
qla2x00_sp_release(struct kref *kref)
{
@@ -2573,7 +2587,8 @@ qla2x00_init_async_sp(srb_t *sp, unsigne
void (*done)(struct srb *sp, int res))
{
timer_setup(&sp->u.iocb_cmd.timer, qla2x00_sp_timeout, 0);
- sp->done = done;
+ sp->done = qla2x00_async_done;
+ sp->async_done = done;
sp->free = qla2x00_sp_free;
sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
sp->u.iocb_cmd.timer.expires = jiffies + tmo * HZ;
From: Martin Varghese <[email protected]>
commit f19c44452b58a84d95e209b847f5495d91c9983a upstream.
IPv6 nd target mask was not getting populated in flow dump.
In the function __ovs_nla_put_key the icmp code mask field was checked
instead of icmp code key field to classify the flow as neighbour discovery.
ufid:bdfbe3e5-60c2-43b0-a5ff-dfcac1c37328, recirc_id(0),dp_hash(0/0),
skb_priority(0/0),in_port(ovs-nm1),skb_mark(0/0),ct_state(0/0),
ct_zone(0/0),ct_mark(0/0),ct_label(0/0),
eth(src=00:00:00:00:00:00/00:00:00:00:00:00,
dst=00:00:00:00:00:00/00:00:00:00:00:00),
eth_type(0x86dd),
ipv6(src=::/::,dst=::/::,label=0/0,proto=58,tclass=0/0,hlimit=0/0,frag=no),
icmpv6(type=135,code=0),
nd(target=2001::2/::,
sll=00:00:00:00:00:00/00:00:00:00:00:00,
tll=00:00:00:00:00:00/00:00:00:00:00:00),
packets:10, bytes:860, used:0.504s, dp:ovs, actions:ovs-nm2
Fixes: e64457191a25 (openvswitch: Restructure datapath.c and flow.c)
Signed-off-by: Martin Varghese <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/openvswitch/flow_netlink.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/openvswitch/flow_netlink.c
+++ b/net/openvswitch/flow_netlink.c
@@ -2201,8 +2201,8 @@ static int __ovs_nla_put_key(const struc
icmpv6_key->icmpv6_type = ntohs(output->tp.src);
icmpv6_key->icmpv6_code = ntohs(output->tp.dst);
- if (icmpv6_key->icmpv6_type == NDISC_NEIGHBOUR_SOLICITATION ||
- icmpv6_key->icmpv6_type == NDISC_NEIGHBOUR_ADVERTISEMENT) {
+ if (swkey->tp.src == htons(NDISC_NEIGHBOUR_SOLICITATION) ||
+ swkey->tp.src == htons(NDISC_NEIGHBOUR_ADVERTISEMENT)) {
struct ovs_key_nd *nd_key;
nla = nla_reserve(skb, OVS_KEY_ATTR_ND, sizeof(*nd_key));
From: Miaoqian Lin <[email protected]>
[ Upstream commit 0ff027027e05a866491bbb53494f0e2a61354c85 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 01f937ffc468 ("soc: qcom: ocmem: don't return NULL in of_get_ocmem")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/ocmem.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
index f1875dc31ae2..85f82e195ef8 100644
--- a/drivers/soc/qcom/ocmem.c
+++ b/drivers/soc/qcom/ocmem.c
@@ -206,6 +206,7 @@ struct ocmem *of_get_ocmem(struct device *dev)
ocmem = platform_get_drvdata(pdev);
if (!ocmem) {
dev_err(dev, "Cannot get ocmem\n");
+ put_device(&pdev->dev);
return ERR_PTR(-ENODEV);
}
return ocmem;
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
commit 188e5834b930acd03ad3cf7c5e7aa24db9665a29 upstream.
The bias-pull-* properties, or PIN_CONFIG_BIAS_PULL_* pin config
parameters, accept optional arguments in ohms denoting the strength of
the pin bias.
Print these values out in debugfs as well.
Fixes: eec450713e5c ("pinctrl: pinconf-generic: Add flag to print arguments")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Tested-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/pinconf-generic.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -30,10 +30,10 @@ static const struct pin_config_item conf
PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL, false),
+ PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", "ohms", true),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
- "input bias pull to pin specific state", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false),
+ "input bias pull to pin specific state", "ohms", true),
+ PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", "ohms", true),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false),
From: Randy Dunlap <[email protected]>
commit 8b2360c7157b462c4870d447d1e65d30ef31f9aa upstream.
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from jive_mtdset().
Fixes: 9db829f485c5 ("[ARM] JIVE: Initial machine support for Logitech Jive")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Alim Akhtar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-s3c/mach-jive.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/mach-s3c/mach-jive.c
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -236,11 +236,11 @@ static int __init jive_mtdset(char *opti
unsigned long set;
if (options == NULL || options[0] == '\0')
- return 0;
+ return 1;
if (kstrtoul(options, 10, &set)) {
printk(KERN_ERR "failed to parse mtdset=%s\n", options);
- return 0;
+ return 1;
}
switch (set) {
@@ -255,7 +255,7 @@ static int __init jive_mtdset(char *opti
"using default.", set);
}
- return 0;
+ return 1;
}
/* parse the mtdset= option given to the kernel command line */
From: Joe Carnuccio <[email protected]>
commit 4c103a802c69fca63976af6b372ccba39ed74370 upstream.
28XX adapters are capable of detecting both T10 PI tag escape values as
well as IP guard. This was missed due to the adapter type missed in the
corresponding macros. Fix this by adding support for 28xx in those macros.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Tested-by: Martin K. Petersen <[email protected]>
Signed-off-by: Joe Carnuccio <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_def.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -4270,8 +4270,10 @@ struct qla_hw_data {
#define QLA_ABTS_WAIT_ENABLED(_sp) \
(QLA_NVME_IOS(_sp) && QLA_ABTS_FW_ENABLED(_sp->fcport->vha->hw))
-#define IS_PI_UNINIT_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha))
-#define IS_PI_IPGUARD_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha))
+#define IS_PI_UNINIT_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha) || \
+ IS_QLA28XX(ha))
+#define IS_PI_IPGUARD_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha) || \
+ IS_QLA28XX(ha))
#define IS_PI_DIFB_DIX0_CAPABLE(ha) (0)
#define IS_PI_SPLIT_DET_CAPABLE_HBA(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha) || \
IS_QLA28XX(ha))
From: Kai Vehmanen <[email protected]>
[ Upstream commit a174e72e2355b9025205b4b6727bf43047eac6c6 ]
Add back logic to mark all playback streams as L1 compatible.
Fixes: 246dd4287dfb ("ASoC: SOF: Intel: make DMI L1 selection more robust")
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/hda-pcm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/sof/intel/hda-pcm.c b/sound/soc/sof/intel/hda-pcm.c
index cc8ddef37f37..d81e87e304e4 100644
--- a/sound/soc/sof/intel/hda-pcm.c
+++ b/sound/soc/sof/intel/hda-pcm.c
@@ -242,6 +242,7 @@ int hda_dsp_pcm_open(struct snd_sof_dev *sdev,
runtime->hw.info &= ~SNDRV_PCM_INFO_PAUSE;
if (hda_always_enable_dmi_l1 ||
+ direction == SNDRV_PCM_STREAM_PLAYBACK ||
spcm->stream[substream->stream].d0i3_compatible)
flags |= SOF_HDA_STREAM_DMI_L1_COMPATIBLE;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 375a347da4889f64d86e1ab7f4e6702b6e9bf299 ]
Fix the missing clk_disable_unprepare() before return
from msm8916_wcd_digital_probe in the error handling case.
Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/msm8916-wcd-digital.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/msm8916-wcd-digital.c b/sound/soc/codecs/msm8916-wcd-digital.c
index fcc10c8bc625..9ad7fc0baf07 100644
--- a/sound/soc/codecs/msm8916-wcd-digital.c
+++ b/sound/soc/codecs/msm8916-wcd-digital.c
@@ -1201,7 +1201,7 @@ static int msm8916_wcd_digital_probe(struct platform_device *pdev)
ret = clk_prepare_enable(priv->mclk);
if (ret < 0) {
dev_err(dev, "failed to enable mclk %d\n", ret);
- return ret;
+ goto err_clk;
}
dev_set_drvdata(dev, priv);
@@ -1209,6 +1209,9 @@ static int msm8916_wcd_digital_probe(struct platform_device *pdev)
return devm_snd_soc_register_component(dev, &msm8916_wcd_digital,
msm8916_wcd_digital_dai,
ARRAY_SIZE(msm8916_wcd_digital_dai));
+err_clk:
+ clk_disable_unprepare(priv->ahbclk);
+ return ret;
}
static int msm8916_wcd_digital_remove(struct platform_device *pdev)
--
2.34.1
From: Zheng Bin <[email protected]>
commit 664d66dc0a64b32e60a5ad59a9aebb08676a612b upstream.
If SND_SOC_SOF_PCI_DEV is n, bulding fails:
sound/soc/sof/intel/pci-tng.o:(.data+0x1c0): undefined reference to `sof_pci_probe'
sound/soc/sof/intel/pci-tng.o:(.data+0x1c8): undefined reference to `sof_pci_remove'
sound/soc/sof/intel/pci-tng.o:(.data+0x1e0): undefined reference to `sof_pci_shutdown'
sound/soc/sof/intel/pci-tng.o:(.data+0x290): undefined reference to `sof_pci_pm'
Make SND_SOC_SOF_MERRIFIELD select SND_SOC_SOF_PCI_DEV to fix this.
Fixes: 8d4ba1be3d22 ("ASoC: SOF: pci: split PCI into different drivers")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sof/intel/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/sound/soc/sof/intel/Kconfig
+++ b/sound/soc/sof/intel/Kconfig
@@ -84,6 +84,7 @@ if SND_SOC_SOF_PCI
config SND_SOC_SOF_MERRIFIELD
tristate "SOF support for Tangier/Merrifield"
default SND_SOC_SOF_PCI
+ select SND_SOC_SOF_PCI_DEV
select SND_SOC_SOF_INTEL_ATOM_HIFI_EP
help
This adds support for Sound Open Firmware for Intel(R) platforms
From: Wang Yufen <[email protected]>
[ Upstream commit 9c34e38c4a870eb30b13f42f5b44f42e9d19ccb8 ]
If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc()
returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial
memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is
greater than osize after sk_msg_alloc(), memleak occurs. To fix we use
sk_msg_trim() to release the allocated memory, then goto wait for memory.
Other call paths of sk_msg_alloc() have the similar issue, such as
tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(),
as Cong Wang suggested.
This issue can cause the following info:
WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
__tcp_close+0x279/0x470
tcp_close+0x1f/0x60
inet_release+0x3f/0x80
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x92/0x250
task_work_run+0x6a/0xa0
do_exit+0x33b/0xb60
do_group_exit+0x2f/0xa0
get_signal+0xb6/0x950
arch_do_signal_or_restart+0xac/0x2a0
exit_to_user_mode_prepare+0xa9/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
kthread+0xe6/0x110
ret_from_fork+0x22/0x30
</TASK>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/skmsg.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index 929a2b096b04..cc381165ea08 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -27,6 +27,7 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
int elem_first_coalesce)
{
struct page_frag *pfrag = sk_page_frag(sk);
+ u32 osize = msg->sg.size;
int ret = 0;
len -= msg->sg.size;
@@ -35,13 +36,17 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
u32 orig_offset;
int use, i;
- if (!sk_page_frag_refill(sk, pfrag))
- return -ENOMEM;
+ if (!sk_page_frag_refill(sk, pfrag)) {
+ ret = -ENOMEM;
+ goto msg_trim;
+ }
orig_offset = pfrag->offset;
use = min_t(int, len, pfrag->size - orig_offset);
- if (!sk_wmem_schedule(sk, use))
- return -ENOMEM;
+ if (!sk_wmem_schedule(sk, use)) {
+ ret = -ENOMEM;
+ goto msg_trim;
+ }
i = msg->sg.end;
sk_msg_iter_var_prev(i);
@@ -71,6 +76,10 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
}
return ret;
+
+msg_trim:
+ sk_msg_trim(sk, msg, osize);
+ return ret;
}
EXPORT_SYMBOL_GPL(sk_msg_alloc);
--
2.34.1
From: Christophe JAILLET <[email protected]>
commit d1868328dec5ae2cf210111025fcbc71f78dd5ca upstream.
ida_alloc_range(..., min, max, ...) returns values from min to max,
inclusive.
So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor().
This is an issue because in device_add_disk(), this value is used in:
ddev->devt = MKDEV(disk->major, disk->first_minor);
and NR_EXT_DEVT is '(1 << MINORBITS)'.
So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow.
Fixes: 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/cc17199798312406b90834e433d2cefe8266823d.1648306232.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/genhd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -324,7 +324,7 @@ int blk_alloc_ext_minor(void)
{
int idx;
- idx = ida_alloc_range(&ext_devt_ida, 0, NR_EXT_DEVT, GFP_KERNEL);
+ idx = ida_alloc_range(&ext_devt_ida, 0, NR_EXT_DEVT - 1, GFP_KERNEL);
if (idx == -ENOSPC)
return -EBUSY;
return idx;
From: Linus Walleij <[email protected]>
[ Upstream commit c22fca40522e2be8af168f3087d87d85e404ea72 ]
The HRTimer in the AB8500 charging code is using CLOCK_REALTIME
to set an alarm some hours forward in time +/- 5 min for a safety
timer.
I have observed that this will sometimes fire sporadically
early when charging a battery with the result that
charging stops.
As CLOCK_REALTIME can be subject to adjustments of time from
sources such as NTP, this cannot be trusted and will likely
for example fire events if the clock is set forward some hours
by say NTP.
Use CLOCK_MONOTONIC as indicated in other instances and the
problem goes away. Also initialize the timer to REL mode
as this is what will be used later.
Fixes: 257107ae6b9b ("ab8500-chargalg: Use hrtimer")
Cc: Lee Jones <[email protected]>
Suggested-by: Matti Vaittinen <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/ab8500_chargalg.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/supply/ab8500_chargalg.c b/drivers/power/supply/ab8500_chargalg.c
index ff4b26b1ceca..b809fa5abbba 100644
--- a/drivers/power/supply/ab8500_chargalg.c
+++ b/drivers/power/supply/ab8500_chargalg.c
@@ -2019,11 +2019,11 @@ static int ab8500_chargalg_probe(struct platform_device *pdev)
psy_cfg.drv_data = di;
/* Initilialize safety timer */
- hrtimer_init(&di->safety_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ hrtimer_init(&di->safety_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
di->safety_timer.function = ab8500_chargalg_safety_timer_expired;
/* Initilialize maintenance timer */
- hrtimer_init(&di->maintenance_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ hrtimer_init(&di->maintenance_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
di->maintenance_timer.function =
ab8500_chargalg_maintenance_timer_expired;
--
2.34.1
From: Dave Stevenson <[email protected]>
[ Upstream commit 5665eee7a3800430e7dc3ef6f25722476b603186 ]
The Atmel is doing some things in the I2C ISR, during which
period it will not respond to further commands. This is
particularly true of the POWERON command.
Increase delays appropriately, and retry should I2C errors be
reported.
Signed-off-by: Dave Stevenson <[email protected]>
Signed-off-by: Detlev Casanova <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../regulator/rpi-panel-attiny-regulator.c | 56 +++++++++++++++----
1 file changed, 46 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/rpi-panel-attiny-regulator.c b/drivers/regulator/rpi-panel-attiny-regulator.c
index ee46bfbf5eee..991b4730d768 100644
--- a/drivers/regulator/rpi-panel-attiny-regulator.c
+++ b/drivers/regulator/rpi-panel-attiny-regulator.c
@@ -37,11 +37,24 @@ static const struct regmap_config attiny_regmap_config = {
static int attiny_lcd_power_enable(struct regulator_dev *rdev)
{
unsigned int data;
+ int ret, i;
regmap_write(rdev->regmap, REG_POWERON, 1);
+ msleep(80);
+
/* Wait for nPWRDWN to go low to indicate poweron is done. */
- regmap_read_poll_timeout(rdev->regmap, REG_PORTB, data,
- data & BIT(0), 10, 1000000);
+ for (i = 0; i < 20; i++) {
+ ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ if (!ret) {
+ if (data & BIT(0))
+ break;
+ }
+ usleep_range(10000, 12000);
+ }
+ usleep_range(10000, 12000);
+
+ if (ret)
+ pr_err("%s: regmap_read_poll_timeout failed %d\n", __func__, ret);
/* Default to the same orientation as the closed source
* firmware used for the panel. Runtime rotation
@@ -57,23 +70,34 @@ static int attiny_lcd_power_disable(struct regulator_dev *rdev)
{
regmap_write(rdev->regmap, REG_PWM, 0);
regmap_write(rdev->regmap, REG_POWERON, 0);
- udelay(1);
+ msleep(30);
return 0;
}
static int attiny_lcd_power_is_enabled(struct regulator_dev *rdev)
{
unsigned int data;
- int ret;
+ int ret, i;
- ret = regmap_read(rdev->regmap, REG_POWERON, &data);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(rdev->regmap, REG_POWERON, &data);
+ if (!ret)
+ break;
+ usleep_range(10000, 12000);
+ }
if (ret < 0)
return ret;
if (!(data & BIT(0)))
return 0;
- ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ if (!ret)
+ break;
+ usleep_range(10000, 12000);
+ }
+
if (ret < 0)
return ret;
@@ -103,20 +127,32 @@ static int attiny_update_status(struct backlight_device *bl)
{
struct regmap *regmap = bl_get_data(bl);
int brightness = bl->props.brightness;
+ int ret, i;
if (bl->props.power != FB_BLANK_UNBLANK ||
bl->props.fb_blank != FB_BLANK_UNBLANK)
brightness = 0;
- return regmap_write(regmap, REG_PWM, brightness);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_write(regmap, REG_PWM, brightness);
+ if (!ret)
+ break;
+ }
+
+ return ret;
}
static int attiny_get_brightness(struct backlight_device *bl)
{
struct regmap *regmap = bl_get_data(bl);
- int ret, brightness;
+ int ret, brightness, i;
+
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(regmap, REG_PWM, &brightness);
+ if (!ret)
+ break;
+ }
- ret = regmap_read(regmap, REG_PWM, &brightness);
if (ret)
return ret;
@@ -166,7 +202,7 @@ static int attiny_i2c_probe(struct i2c_client *i2c,
}
regmap_write(regmap, REG_POWERON, 0);
- mdelay(1);
+ msleep(30);
config.dev = &i2c->dev;
config.regmap = regmap;
--
2.34.1
From: Michael Ellerman <[email protected]>
[ Upstream commit d4679ac8ea2e5078704aa1c026db36580cc1bf9a ]
Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data
is read or write.") we use page_fault_is_write(regs->dsisr) in
__bad_page_fault() to determine if the fault is for a read or write, and
change the message printed accordingly.
But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data
Storage Interrupt Status Register) to a useful value. All ISA versions
from v2.03 through v3.1 specify that the Data Segment Interrupt sets
DSISR "to an undefined value". As far as I can see there's no mention of
SLB faults setting DSISR in any BookIV content either.
This manifests as accesses that should be a read being incorrectly
reported as writes, for example, using the xmon "dump" command:
0:mon> d 0x5deadbeef0000000
5deadbeef0000000
[359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000
[359526.415611][ C6] Faulting instruction address: 0xc00000000010a300
cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400]
pc: c00000000010a300: mread+0x90/0x190
If we disassemble the PC, we see a load instruction:
0:mon> di c00000000010a300
c00000000010a300 89490000 lbz r10,0(r9)
We can also see in exceptions-64s.S that the data_access_slb block
doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So
the value we're using to determine if the fault is a read/write is some
stale value in pt_regs from a previous page fault.
Rework the printing logic to separate the SLB fault case out, and only
print read/write in the cases where we can determine it.
The result looks like eg:
0:mon> d 0x5deadbeef0000000
5deadbeef0000000
[ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000
[ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0
cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]
0:mon> d 0
0000000000000000
[ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000
[ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0
cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]
Fixes: 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.")
Reported-by: Nageswara R Sastry <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/fault.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index a8d0ce85d39a..4a15172dfef2 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -568,18 +568,24 @@ NOKPROBE_SYMBOL(hash__do_page_fault);
static void __bad_page_fault(struct pt_regs *regs, int sig)
{
int is_write = page_fault_is_write(regs->dsisr);
+ const char *msg;
/* kernel has accessed a bad area */
+ if (regs->dar < PAGE_SIZE)
+ msg = "Kernel NULL pointer dereference";
+ else
+ msg = "Unable to handle kernel data access";
+
switch (TRAP(regs)) {
case INTERRUPT_DATA_STORAGE:
- case INTERRUPT_DATA_SEGMENT:
case INTERRUPT_H_DATA_STORAGE:
- pr_alert("BUG: %s on %s at 0x%08lx\n",
- regs->dar < PAGE_SIZE ? "Kernel NULL pointer dereference" :
- "Unable to handle kernel data access",
+ pr_alert("BUG: %s on %s at 0x%08lx\n", msg,
is_write ? "write" : "read", regs->dar);
break;
+ case INTERRUPT_DATA_SEGMENT:
+ pr_alert("BUG: %s at 0x%08lx\n", msg, regs->dar);
+ break;
case INTERRUPT_INST_STORAGE:
case INTERRUPT_INST_SEGMENT:
pr_alert("BUG: Unable to handle kernel instruction fetch%s",
--
2.34.1
From: Kuldeep Singh <[email protected]>
commit 31d3687d6017c7ce6061695361598d9cda70807a upstream.
Reorder dmas and dma-names property for spi controller node to make it
compliant with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/spear13xx.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -284,9 +284,9 @@
#size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
- dmas = <&dwdma0 4 0 0>,
- <&dwdma0 5 0 0>;
- dma-names = "tx", "rx";
+ dmas = <&dwdma0 5 0 0>,
+ <&dwdma0 4 0 0>;
+ dma-names = "rx", "tx";
};
rtc@e0580000 {
From: Ville Syrjälä <[email protected]>
commit 9cddf03b2af07443bebdc73cba21acb360c079e8 upstream.
ICL+ PLLs can't genenerate certain frequencies. Running the PLL
algorithms through for all frequencies 25-594MHz we see a gap just
above 500 MHz. Specifically 500-522.8MHZ for TC PLLs, and 500-533.2
MHz for combo PHY PLLs. Reject those frequencies hdmi_port_clock_valid()
so that we properly filter out unsupported modes and/or color depths
for HDMI.
Cc: [email protected]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5247
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Mika Kahola <[email protected]>
(cherry picked from commit e5086cb3f3d3f94091be29eec38cf13f8a75a778)
Signed-off-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_hdmi.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1831,6 +1831,7 @@ hdmi_port_clock_valid(struct intel_hdmi
bool has_hdmi_sink)
{
struct drm_i915_private *dev_priv = intel_hdmi_to_i915(hdmi);
+ enum phy phy = intel_port_to_phy(dev_priv, hdmi_to_dig_port(hdmi)->base.port);
if (clock < 25000)
return MODE_CLOCK_LOW;
@@ -1851,6 +1852,14 @@ hdmi_port_clock_valid(struct intel_hdmi
if (IS_CHERRYVIEW(dev_priv) && clock > 216000 && clock < 240000)
return MODE_CLOCK_RANGE;
+ /* ICL+ combo PHY PLL can't generate 500-533.2 MHz */
+ if (intel_phy_is_combo(dev_priv, phy) && clock > 500000 && clock < 533200)
+ return MODE_CLOCK_RANGE;
+
+ /* ICL+ TC PHY PLL can't generate 500-532.8 MHz */
+ if (intel_phy_is_tc(dev_priv, phy) && clock > 500000 && clock < 532800)
+ return MODE_CLOCK_RANGE;
+
/*
* SNPS PHYs' MPLLB table-based programming can only handle a fixed
* set of link rates.
From: Daniel Wagner <[email protected]>
commit d4523bd6fd5d3afa9f08a86038a8a92176089f5b upstream.
Move common open-coded asynchronous command initializing code such as
setting up the timer and the done callback into one function. This is a
preparation step and allows us later on to change the low level error flow
handling at a central place.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_gbl.h | 3 -
drivers/scsi/qla2xxx/qla_gs.c | 70 ++++++++++------------------------
drivers/scsi/qla2xxx/qla_init.c | 77 ++++++++++++--------------------------
drivers/scsi/qla2xxx/qla_iocb.c | 29 +++++++-------
drivers/scsi/qla2xxx/qla_mbx.c | 11 +----
drivers/scsi/qla2xxx/qla_mid.c | 5 --
drivers/scsi/qla2xxx/qla_mr.c | 7 +--
drivers/scsi/qla2xxx/qla_target.c | 6 --
8 files changed, 76 insertions(+), 132 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -316,7 +316,8 @@ extern int qla2x00_start_sp(srb_t *);
extern int qla24xx_dif_start_scsi(srb_t *);
extern int qla2x00_start_bidir(srb_t *, struct scsi_qla_host *, uint32_t);
extern int qla2xxx_dif_start_scsi_mq(srb_t *);
-extern void qla2x00_init_timer(srb_t *sp, unsigned long tmo);
+extern void qla2x00_init_async_sp(srb_t *sp, unsigned long tmo,
+ void (*done)(struct srb *, int));
extern unsigned long qla2x00_get_async_timeout(struct scsi_qla_host *);
extern void *qla2x00_alloc_iocbs(struct scsi_qla_host *, srb_t *);
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -598,7 +598,8 @@ static int qla_async_rftid(scsi_qla_host
sp->type = SRB_CT_PTHRU_CMD;
sp->name = "rft_id";
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_sns_sp_done);
sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev,
sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma,
@@ -638,8 +639,6 @@ static int qla_async_rftid(scsi_qla_host
sp->u.iocb_cmd.u.ctarg.req_size = RFT_ID_REQ_SIZE;
sp->u.iocb_cmd.u.ctarg.rsp_size = RFT_ID_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- sp->done = qla2x00_async_sns_sp_done;
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async-%s - hdl=%x portid %06x.\n",
@@ -694,7 +693,8 @@ static int qla_async_rffid(scsi_qla_host
sp->type = SRB_CT_PTHRU_CMD;
sp->name = "rff_id";
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_sns_sp_done);
sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev,
sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma,
@@ -732,8 +732,6 @@ static int qla_async_rffid(scsi_qla_host
sp->u.iocb_cmd.u.ctarg.req_size = RFF_ID_REQ_SIZE;
sp->u.iocb_cmd.u.ctarg.rsp_size = RFF_ID_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- sp->done = qla2x00_async_sns_sp_done;
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async-%s - hdl=%x portid %06x feature %x type %x.\n",
@@ -785,7 +783,8 @@ static int qla_async_rnnid(scsi_qla_host
sp->type = SRB_CT_PTHRU_CMD;
sp->name = "rnid";
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_sns_sp_done);
sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev,
sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma,
@@ -823,9 +822,6 @@ static int qla_async_rnnid(scsi_qla_host
sp->u.iocb_cmd.u.ctarg.rsp_size = RNN_ID_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- sp->done = qla2x00_async_sns_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async-%s - hdl=%x portid %06x\n",
sp->name, sp->handle, d_id->b24);
@@ -892,7 +888,8 @@ static int qla_async_rsnn_nn(scsi_qla_ho
sp->type = SRB_CT_PTHRU_CMD;
sp->name = "rsnn_nn";
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_sns_sp_done);
sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev,
sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma,
@@ -936,9 +933,6 @@ static int qla_async_rsnn_nn(scsi_qla_ho
sp->u.iocb_cmd.u.ctarg.rsp_size = RSNN_NN_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- sp->done = qla2x00_async_sns_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async-%s - hdl=%x.\n",
sp->name, sp->handle);
@@ -2912,8 +2906,8 @@ int qla24xx_async_gpsc(scsi_qla_host_t *
sp->name = "gpsc";
sp->gen1 = fcport->rscn_gen;
sp->gen2 = fcport->login_gen;
-
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla24xx_async_gpsc_sp_done);
/* CT_IU preamble */
ct_req = qla24xx_prep_ct_fm_req(fcport->ct_desc.ct_sns, GPSC_CMD,
@@ -2931,9 +2925,6 @@ int qla24xx_async_gpsc(scsi_qla_host_t *
sp->u.iocb_cmd.u.ctarg.rsp_size = GPSC_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = vha->mgmt_svr_loop_id;
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- sp->done = qla24xx_async_gpsc_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0x205e,
"Async-%s %8phC hdl=%x loopid=%x portid=%02x%02x%02x.\n",
sp->name, fcport->port_name, sp->handle,
@@ -3189,7 +3180,8 @@ int qla24xx_async_gpnid(scsi_qla_host_t
sp->name = "gpnid";
sp->u.iocb_cmd.u.ctarg.id = *id;
sp->gen1 = 0;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_gpnid_sp_done);
spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
list_for_each_entry(tsp, &vha->gpnid_list, elem) {
@@ -3237,9 +3229,6 @@ int qla24xx_async_gpnid(scsi_qla_host_t
sp->u.iocb_cmd.u.ctarg.rsp_size = GPN_ID_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- sp->done = qla2x00_async_gpnid_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0x2067,
"Async-%s hdl=%x ID %3phC.\n", sp->name,
sp->handle, &ct_req->req.port_id.port_id);
@@ -3347,9 +3336,8 @@ int qla24xx_async_gffid(scsi_qla_host_t
sp->name = "gffid";
sp->gen1 = fcport->rscn_gen;
sp->gen2 = fcport->login_gen;
-
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla24xx_async_gffid_sp_done);
/* CT_IU preamble */
ct_req = qla2x00_prep_ct_req(fcport->ct_desc.ct_sns, GFF_ID_CMD,
@@ -3367,8 +3355,6 @@ int qla24xx_async_gffid(scsi_qla_host_t
sp->u.iocb_cmd.u.ctarg.rsp_size = GFF_ID_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->done = qla24xx_async_gffid_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0x2132,
"Async-%s hdl=%x %8phC.\n", sp->name,
sp->handle, fcport->port_name);
@@ -3891,9 +3877,8 @@ static int qla24xx_async_gnnft(scsi_qla_
sp->name = "gnnft";
sp->gen1 = vha->hw->base_qpair->chip_reset;
sp->gen2 = fc4_type;
-
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_gpnft_gnnft_sp_done);
memset(sp->u.iocb_cmd.u.ctarg.rsp, 0, sp->u.iocb_cmd.u.ctarg.rsp_size);
memset(sp->u.iocb_cmd.u.ctarg.req, 0, sp->u.iocb_cmd.u.ctarg.req_size);
@@ -3909,8 +3894,6 @@ static int qla24xx_async_gnnft(scsi_qla_
sp->u.iocb_cmd.u.ctarg.req_size = GNN_FT_REQ_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->done = qla2x00_async_gpnft_gnnft_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async-%s hdl=%x FC4Type %x.\n", sp->name,
sp->handle, ct_req->req.gpn_ft.port_type);
@@ -4056,9 +4039,8 @@ int qla24xx_async_gpnft(scsi_qla_host_t
sp->name = "gpnft";
sp->gen1 = vha->hw->base_qpair->chip_reset;
sp->gen2 = fc4_type;
-
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_gpnft_gnnft_sp_done);
rspsz = sp->u.iocb_cmd.u.ctarg.rsp_size;
memset(sp->u.iocb_cmd.u.ctarg.rsp, 0, sp->u.iocb_cmd.u.ctarg.rsp_size);
@@ -4073,8 +4055,6 @@ int qla24xx_async_gpnft(scsi_qla_host_t
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->done = qla2x00_async_gpnft_gnnft_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async-%s hdl=%x FC4Type %x.\n", sp->name,
sp->handle, ct_req->req.gpn_ft.port_type);
@@ -4188,9 +4168,8 @@ int qla24xx_async_gnnid(scsi_qla_host_t
sp->name = "gnnid";
sp->gen1 = fcport->rscn_gen;
sp->gen2 = fcport->login_gen;
-
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_gnnid_sp_done);
/* CT_IU preamble */
ct_req = qla2x00_prep_ct_req(fcport->ct_desc.ct_sns, GNN_ID_CMD,
@@ -4209,8 +4188,6 @@ int qla24xx_async_gnnid(scsi_qla_host_t
sp->u.iocb_cmd.u.ctarg.rsp_size = GNN_ID_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->done = qla2x00_async_gnnid_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async-%s - %8phC hdl=%x loopid=%x portid %06x.\n",
sp->name, fcport->port_name,
@@ -4316,9 +4293,8 @@ int qla24xx_async_gfpnid(scsi_qla_host_t
sp->name = "gfpnid";
sp->gen1 = fcport->rscn_gen;
sp->gen2 = fcport->login_gen;
-
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_gfpnid_sp_done);
/* CT_IU preamble */
ct_req = qla2x00_prep_ct_req(fcport->ct_desc.ct_sns, GFPN_ID_CMD,
@@ -4337,8 +4313,6 @@ int qla24xx_async_gfpnid(scsi_qla_host_t
sp->u.iocb_cmd.u.ctarg.rsp_size = GFPN_ID_RSP_SIZE;
sp->u.iocb_cmd.u.ctarg.nport_handle = NPH_SNS;
- sp->done = qla2x00_async_gfpnid_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async-%s - %8phC hdl=%x loopid=%x portid %06x.\n",
sp->name, fcport->port_name,
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -167,16 +167,14 @@ int qla24xx_async_abort_cmd(srb_t *cmd_s
if (wait)
sp->flags = SRB_WAKEUP_ON_COMP;
- abt_iocb->timeout = qla24xx_abort_iocb_timeout;
init_completion(&abt_iocb->u.abt.comp);
/* FW can send 2 x ABTS's timeout/20s */
- qla2x00_init_timer(sp, 42);
+ qla2x00_init_async_sp(sp, 42, qla24xx_abort_sp_done);
+ sp->u.iocb_cmd.timeout = qla24xx_abort_iocb_timeout;
abt_iocb->u.abt.cmd_hndl = cmd_sp->handle;
abt_iocb->u.abt.req_que_no = cpu_to_le16(cmd_sp->qpair->req->id);
- sp->done = qla24xx_abort_sp_done;
-
ql_dbg(ql_dbg_async, vha, 0x507c,
"Abort command issued - hdl=%x, type=%x\n", cmd_sp->handle,
cmd_sp->type);
@@ -320,12 +318,10 @@ qla2x00_async_login(struct scsi_qla_host
sp->name = "login";
sp->gen1 = fcport->rscn_gen;
sp->gen2 = fcport->login_gen;
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_login_sp_done);
lio = &sp->u.iocb_cmd;
- lio->timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
-
- sp->done = qla2x00_async_login_sp_done;
if (N2N_TOPO(fcport->vha->hw) && fcport_is_bigger(fcport)) {
lio->u.logio.flags |= SRB_LOGIN_PRLI_ONLY;
} else {
@@ -378,7 +374,6 @@ int
qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport)
{
srb_t *sp;
- struct srb_iocb *lio;
int rval = QLA_FUNCTION_FAILED;
fcport->flags |= FCF_ASYNC_SENT;
@@ -388,12 +383,8 @@ qla2x00_async_logout(struct scsi_qla_hos
sp->type = SRB_LOGOUT_CMD;
sp->name = "logout";
-
- lio = &sp->u.iocb_cmd;
- lio->timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
-
- sp->done = qla2x00_async_logout_sp_done;
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_logout_sp_done),
ql_dbg(ql_dbg_disc, vha, 0x2070,
"Async-logout - hdl=%x loop-id=%x portid=%02x%02x%02x %8phC explicit %d.\n",
@@ -440,7 +431,6 @@ int
qla2x00_async_prlo(struct scsi_qla_host *vha, fc_port_t *fcport)
{
srb_t *sp;
- struct srb_iocb *lio;
int rval;
rval = QLA_FUNCTION_FAILED;
@@ -450,12 +440,8 @@ qla2x00_async_prlo(struct scsi_qla_host
sp->type = SRB_PRLO_CMD;
sp->name = "prlo";
-
- lio = &sp->u.iocb_cmd;
- lio->timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
-
- sp->done = qla2x00_async_prlo_sp_done;
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_prlo_sp_done);
ql_dbg(ql_dbg_disc, vha, 0x2070,
"Async-prlo - hdl=%x loop-id=%x portid=%02x%02x%02x.\n",
@@ -576,16 +562,15 @@ qla2x00_async_adisc(struct scsi_qla_host
sp->type = SRB_ADISC_CMD;
sp->name = "adisc";
-
- lio = &sp->u.iocb_cmd;
- lio->timeout = qla2x00_async_iocb_timeout;
sp->gen1 = fcport->rscn_gen;
sp->gen2 = fcport->login_gen;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_adisc_sp_done);
- sp->done = qla2x00_async_adisc_sp_done;
- if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
+ if (data[1] & QLA_LOGIO_LOGIN_RETRIED) {
+ lio = &sp->u.iocb_cmd;
lio->u.logio.flags |= SRB_LOGIN_RETRIED;
+ }
ql_dbg(ql_dbg_disc, vha, 0x206f,
"Async-adisc - hdl=%x loopid=%x portid=%06x %8phC.\n",
@@ -1085,7 +1070,6 @@ static void qla24xx_async_gnl_sp_done(sr
int qla24xx_async_gnl(struct scsi_qla_host *vha, fc_port_t *fcport)
{
srb_t *sp;
- struct srb_iocb *mbx;
int rval = QLA_FUNCTION_FAILED;
unsigned long flags;
u16 *mb;
@@ -1118,10 +1102,8 @@ int qla24xx_async_gnl(struct scsi_qla_ho
sp->name = "gnlist";
sp->gen1 = fcport->rscn_gen;
sp->gen2 = fcport->login_gen;
-
- mbx = &sp->u.iocb_cmd;
- mbx->timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha)+2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla24xx_async_gnl_sp_done);
mb = sp->u.iocb_cmd.u.mbx.out_mb;
mb[0] = MBC_PORT_NODE_NAME_LIST;
@@ -1133,8 +1115,6 @@ int qla24xx_async_gnl(struct scsi_qla_ho
mb[8] = vha->gnl.size;
mb[9] = vha->vp_idx;
- sp->done = qla24xx_async_gnl_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0x20da,
"Async-%s - OUT WWPN %8phC hndl %x\n",
sp->name, fcport->port_name, sp->handle);
@@ -1270,12 +1250,10 @@ qla24xx_async_prli(struct scsi_qla_host
sp->type = SRB_PRLI_CMD;
sp->name = "prli";
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_prli_sp_done);
lio = &sp->u.iocb_cmd;
- lio->timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
-
- sp->done = qla2x00_async_prli_sp_done;
lio->u.logio.flags = 0;
if (NVME_TARGET(vha->hw, fcport))
@@ -1345,10 +1323,8 @@ int qla24xx_async_gpdb(struct scsi_qla_h
sp->name = "gpdb";
sp->gen1 = fcport->rscn_gen;
sp->gen2 = fcport->login_gen;
-
- mbx = &sp->u.iocb_cmd;
- mbx->timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla24xx_async_gpdb_sp_done);
pd = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
if (pd == NULL) {
@@ -1367,11 +1343,10 @@ int qla24xx_async_gpdb(struct scsi_qla_h
mb[9] = vha->vp_idx;
mb[10] = opt;
- mbx->u.mbx.in = pd;
+ mbx = &sp->u.iocb_cmd;
+ mbx->u.mbx.in = (void *)pd;
mbx->u.mbx.in_dma = pd_dma;
- sp->done = qla24xx_async_gpdb_sp_done;
-
ql_dbg(ql_dbg_disc, vha, 0x20dc,
"Async-%s %8phC hndl %x opt %x\n",
sp->name, fcport->port_name, sp->handle, opt);
@@ -1955,18 +1930,16 @@ qla2x00_async_tm_cmd(fc_port_t *fcport,
if (!sp)
goto done;
- tm_iocb = &sp->u.iocb_cmd;
sp->type = SRB_TM_CMD;
sp->name = "tmf";
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha),
+ qla2x00_tmf_sp_done);
+ sp->u.iocb_cmd.timeout = qla2x00_tmf_iocb_timeout;
- tm_iocb->timeout = qla2x00_tmf_iocb_timeout;
+ tm_iocb = &sp->u.iocb_cmd;
init_completion(&tm_iocb->u.tmf.comp);
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha));
-
tm_iocb->u.tmf.flags = flags;
tm_iocb->u.tmf.lun = lun;
- tm_iocb->u.tmf.data = tag;
- sp->done = qla2x00_tmf_sp_done;
ql_dbg(ql_dbg_taskm, vha, 0x802f,
"Async-tmf hdl=%x loop-id=%x portid=%02x%02x%02x.\n",
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2560,11 +2560,15 @@ qla24xx_tm_iocb(srb_t *sp, struct tsk_mg
}
}
-void qla2x00_init_timer(srb_t *sp, unsigned long tmo)
+void
+qla2x00_init_async_sp(srb_t *sp, unsigned long tmo,
+ void (*done)(struct srb *sp, int res))
{
timer_setup(&sp->u.iocb_cmd.timer, qla2x00_sp_timeout, 0);
- sp->u.iocb_cmd.timer.expires = jiffies + tmo * HZ;
+ sp->done = done;
sp->free = qla2x00_sp_free;
+ sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
+ sp->u.iocb_cmd.timer.expires = jiffies + tmo * HZ;
if (IS_QLAFX00(sp->vha->hw) && sp->type == SRB_FXIOCB_DCMD)
init_completion(&sp->u.iocb_cmd.u.fxiocb.fxiocb_comp);
sp->start_timer = 1;
@@ -2672,11 +2676,11 @@ qla24xx_els_dcmd_iocb(scsi_qla_host_t *v
sp->type = SRB_ELS_DCMD;
sp->name = "ELS_DCMD";
sp->fcport = fcport;
- elsio->timeout = qla2x00_els_dcmd_iocb_timeout;
- qla2x00_init_timer(sp, ELS_DCMD_TIMEOUT);
- init_completion(&sp->u.iocb_cmd.u.els_logo.comp);
- sp->done = qla2x00_els_dcmd_sp_done;
+ qla2x00_init_async_sp(sp, ELS_DCMD_TIMEOUT,
+ qla2x00_els_dcmd_sp_done);
sp->free = qla2x00_els_dcmd_sp_free;
+ sp->u.iocb_cmd.timeout = qla2x00_els_dcmd_iocb_timeout;
+ init_completion(&sp->u.iocb_cmd.u.els_logo.comp);
elsio->u.els_logo.els_logo_pyld = dma_alloc_coherent(&ha->pdev->dev,
DMA_POOL_SIZE, &elsio->u.els_logo.els_logo_pyld_dma,
@@ -2993,17 +2997,16 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *
ql_dbg(ql_dbg_io, vha, 0x3073,
"%s Enter: PLOGI portid=%06x\n", __func__, fcport->d_id.b24);
- sp->type = SRB_ELS_DCMD;
- sp->name = "ELS_DCMD";
- sp->fcport = fcport;
-
- elsio->timeout = qla2x00_els_dcmd2_iocb_timeout;
if (wait)
sp->flags = SRB_WAKEUP_ON_COMP;
- qla2x00_init_timer(sp, ELS_DCMD_TIMEOUT + 2);
+ sp->type = SRB_ELS_DCMD;
+ sp->name = "ELS_DCMD";
+ sp->fcport = fcport;
+ qla2x00_init_async_sp(sp, ELS_DCMD_TIMEOUT + 2,
+ qla2x00_els_dcmd2_sp_done);
+ sp->u.iocb_cmd.timeout = qla2x00_els_dcmd2_iocb_timeout;
- sp->done = qla2x00_els_dcmd2_sp_done;
elsio->u.els_plogi.tx_size = elsio->u.els_plogi.rx_size = DMA_POOL_SIZE;
ptr = elsio->u.els_plogi.els_plogi_pyld =
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -6483,19 +6483,16 @@ int qla24xx_send_mb_cmd(struct scsi_qla_
if (!sp)
goto done;
- sp->type = SRB_MB_IOCB;
- sp->name = mb_to_str(mcp->mb[0]);
-
c = &sp->u.iocb_cmd;
- c->timeout = qla2x00_async_iocb_timeout;
init_completion(&c->u.mbx.comp);
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ sp->type = SRB_MB_IOCB;
+ sp->name = mb_to_str(mcp->mb[0]);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_mb_sp_done);
memcpy(sp->u.iocb_cmd.u.mbx.out_mb, mcp->mb, SIZEOF_IOCB_MB_REG);
- sp->done = qla2x00_async_mb_sp_done;
-
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_mbx, vha, 0x1018,
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -972,9 +972,8 @@ int qla24xx_control_vp(scsi_qla_host_t *
sp->type = SRB_CTRL_VP;
sp->name = "ctrl_vp";
sp->comp = ∁
- sp->done = qla_ctrlvp_sp_done;
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla_ctrlvp_sp_done);
sp->u.iocb_cmd.u.ctrlvp.cmd = cmd;
sp->u.iocb_cmd.u.ctrlvp.vp_index = vp_index;
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -1793,11 +1793,11 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc
sp->type = SRB_FXIOCB_DCMD;
sp->name = "fxdisc";
+ qla2x00_init_async_sp(sp, FXDISC_TIMEOUT,
+ qla2x00_fxdisc_sp_done);
+ sp->u.iocb_cmd.timeout = qla2x00_fxdisc_iocb_timeout;
fdisc = &sp->u.iocb_cmd;
- fdisc->timeout = qla2x00_fxdisc_iocb_timeout;
- qla2x00_init_timer(sp, FXDISC_TIMEOUT);
-
switch (fx_type) {
case FXDISC_GET_CONFIG_INFO:
fdisc->u.fxiocb.flags =
@@ -1898,7 +1898,6 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc
}
fdisc->u.fxiocb.req_func_type = cpu_to_le16(fx_type);
- sp->done = qla2x00_fxdisc_sp_done;
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS)
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -656,12 +656,10 @@ int qla24xx_async_notify_ack(scsi_qla_ho
sp->type = type;
sp->name = "nack";
-
- sp->u.iocb_cmd.timeout = qla2x00_async_iocb_timeout;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha)+2);
+ qla2x00_init_async_sp(sp, qla2x00_get_async_timeout(vha) + 2,
+ qla2x00_async_nack_sp_done);
sp->u.iocb_cmd.u.nack.ntfy = ntfy;
- sp->done = qla2x00_async_nack_sp_done;
ql_dbg(ql_dbg_disc, vha, 0x20f4,
"Async-%s %8phC hndl %x %s\n",
From: Arınç ÜNAL <[email protected]>
[ Upstream commit 5bc148649cf358d0cccf525452a4efbd4bc89a0f ]
Fix the GB-PC2 devicetree. Refer to the schematics of the device for more
information.
GB-PC2 devicetree fixes:
- Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions.
- Remove gpio-leds node as the system LED is not wired to anywhere on
the board and the power LED is directly wired to GND.
- Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO.
- Use reg 7 for the external phy to be on par with
Documentation/devicetree/bindings/net/dsa/mt7530.txt.
- Use the status value "okay".
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf
Reviewed-by: Sergio Paracuellos <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/mt7621-dts/gbpc2.dts | 110 +++++++++++++++++++++++++--
1 file changed, 102 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/mt7621-dts/gbpc2.dts b/drivers/staging/mt7621-dts/gbpc2.dts
index f9b69091bfc0..6f6fed071dda 100644
--- a/drivers/staging/mt7621-dts/gbpc2.dts
+++ b/drivers/staging/mt7621-dts/gbpc2.dts
@@ -1,27 +1,121 @@
/dts-v1/;
-#include "gbpc1.dts"
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc";
model = "GB-PC2";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x1c000000>,
+ <0x20000000 0x04000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ palmbus: palmbus@1e000000 {
+ i2c@900 {
+ status = "okay";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
};
-&default_gpio {
- groups = "wdt", "uart3";
- function = "gpio";
+&sdhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ broken-flash-reset;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: state-default {
+ gpio-pinmux {
+ groups = "wdt";
+ function = "gpio";
+ };
+ };
};
ðernet {
gmac1: mac@1 {
- status = "ok";
- phy-handle = <&phy_external>;
+ status = "okay";
+ phy-handle = <ðphy7>;
};
mdio-bus {
- phy_external: ethernet-phy@5 {
- reg = <5>;
+ ethphy7: ethernet-phy@7 {
+ reg = <7>;
phy-mode = "rgmii-rxid";
};
};
};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "ethblack";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "ethblue";
+ };
+ };
+};
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit f9e2ca0640e59d19af0ff285ee5591ed39069b09 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error if fals.
Fixes: cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/atmel/atmel_ssc_dai.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 6a63e8797a0b..97533412ce11 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -280,7 +280,10 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream,
/* Enable PMC peripheral clock for this SSC */
pr_debug("atmel_ssc_dai: Starting clock\n");
- clk_enable(ssc_p->ssc->clk);
+ ret = clk_enable(ssc_p->ssc->clk);
+ if (ret)
+ return ret;
+
ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk);
/* Reset the SSC unless initialized to keep it in a clean state */
--
2.34.1
From: Hans Verkuil <[email protected]>
[ Upstream commit 914941827aad5ecddf9bf3a6dee67fbec1af1fff ]
This fixes several issues found with 'v4l2-compliance -s':
1) read()/write() is supported, but not reported in the capabilities
2) S_STD(G_STD()) failed: setting the same standard should just return 0.
3) G_PARM failed to set readbuffers.
4) different field values in the format vs. what v4l2_buffer reported.
5) zero the sequence number when starting streaming.
6) drop VB_USERPTR: makes no sense with dma_contig streaming.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/zoran/zoran_card.c | 2 +-
drivers/staging/media/zoran/zoran_driver.c | 13 ++++++++++---
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/zoran/zoran_card.c b/drivers/staging/media/zoran/zoran_card.c
index a83314b16548..11d415c0c05d 100644
--- a/drivers/staging/media/zoran/zoran_card.c
+++ b/drivers/staging/media/zoran/zoran_card.c
@@ -811,7 +811,7 @@ static int zoran_init_video_device(struct zoran *zr, struct video_device *video_
*video_dev = zoran_template;
video_dev->v4l2_dev = &zr->v4l2_dev;
video_dev->lock = &zr->lock;
- video_dev->device_caps = V4L2_CAP_STREAMING | dir;
+ video_dev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_READWRITE | dir;
strscpy(video_dev->name, ZR_DEVNAME(zr), sizeof(video_dev->name));
/*
diff --git a/drivers/staging/media/zoran/zoran_driver.c b/drivers/staging/media/zoran/zoran_driver.c
index 551db338c7f7..84665637ebb7 100644
--- a/drivers/staging/media/zoran/zoran_driver.c
+++ b/drivers/staging/media/zoran/zoran_driver.c
@@ -255,8 +255,6 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability
strscpy(cap->card, ZR_DEVNAME(zr), sizeof(cap->card));
strscpy(cap->driver, "zoran", sizeof(cap->driver));
snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", pci_name(zr->pci_dev));
- cap->device_caps = zr->video_dev->device_caps;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
return 0;
}
@@ -582,6 +580,9 @@ static int zoran_s_std(struct file *file, void *__fh, v4l2_std_id std)
struct zoran *zr = video_drvdata(file);
int res = 0;
+ if (zr->norm == std)
+ return 0;
+
if (zr->running != ZORAN_MAP_MODE_NONE)
return -EBUSY;
@@ -739,6 +740,7 @@ static int zoran_g_parm(struct file *file, void *priv, struct v4l2_streamparm *p
if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
+ parm->parm.capture.readbuffers = 9;
return 0;
}
@@ -869,6 +871,10 @@ int zr_set_buf(struct zoran *zr)
vbuf = &buf->vbuf;
buf->vbuf.field = V4L2_FIELD_INTERLACED;
+ if (BUZ_MAX_HEIGHT < (zr->v4l_settings.height * 2))
+ buf->vbuf.field = V4L2_FIELD_INTERLACED;
+ else
+ buf->vbuf.field = V4L2_FIELD_TOP;
vb2_set_plane_payload(&buf->vbuf.vb2_buf, 0, zr->buffer_size);
vb2_buffer_done(&buf->vbuf.vb2_buf, VB2_BUF_STATE_DONE);
zr->inuse[0] = NULL;
@@ -928,6 +934,7 @@ static int zr_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
zr->stat_com[j] = cpu_to_le32(1);
zr->inuse[j] = NULL;
}
+ zr->vbseq = 0;
if (zr->map_mode != ZORAN_MAP_MODE_RAW) {
pci_info(zr->pci_dev, "START JPG\n");
@@ -1018,7 +1025,7 @@ int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir)
vq->dev = &zr->pci_dev->dev;
vq->type = dir;
- vq->io_modes = VB2_USERPTR | VB2_DMABUF | VB2_MMAP | VB2_READ | VB2_WRITE;
+ vq->io_modes = VB2_DMABUF | VB2_MMAP | VB2_READ | VB2_WRITE;
vq->drv_priv = zr;
vq->buf_struct_size = sizeof(struct zr_buffer);
vq->ops = &zr_video_qops;
--
2.34.1
From: Neil Armstrong <[email protected]>
[ Upstream commit e67f6037ae1be34b2b686bab72caa41d57714534 ]
This moves all the non-DW-HDMI code where it should be:
an encoder in the drm/meson core driver.
The bridge functions are copied as-is, except:
- the encoder init uses the simple kms helper
- the mode_set has been moved to atomic_enable()
- debug prints are converted to dev_debg()
For now the bridge attach flags is 0, DRM_BRIDGE_ATTACH_NO_CONNECTOR
will be handled later.
The meson dw-hdmi glue is slightly fixed to live without the
encoder in the same driver.
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
[narmstrong: fixed warning because missing meson_encoder_hdmi.h include]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/meson/Makefile | 1 +
drivers/gpu/drm/meson/meson_drv.c | 5 +
drivers/gpu/drm/meson/meson_dw_hdmi.c | 341 ++-----------------
drivers/gpu/drm/meson/meson_encoder_hdmi.c | 370 +++++++++++++++++++++
drivers/gpu/drm/meson/meson_encoder_hdmi.h | 12 +
5 files changed, 407 insertions(+), 322 deletions(-)
create mode 100644 drivers/gpu/drm/meson/meson_encoder_hdmi.c
create mode 100644 drivers/gpu/drm/meson/meson_encoder_hdmi.h
diff --git a/drivers/gpu/drm/meson/Makefile b/drivers/gpu/drm/meson/Makefile
index 28a519cdf66b..523fce45f16b 100644
--- a/drivers/gpu/drm/meson/Makefile
+++ b/drivers/gpu/drm/meson/Makefile
@@ -2,6 +2,7 @@
meson-drm-y := meson_drv.o meson_plane.o meson_crtc.o meson_venc_cvbs.o
meson-drm-y += meson_viu.o meson_vpp.o meson_venc.o meson_vclk.o meson_overlay.o
meson-drm-y += meson_rdma.o meson_osd_afbcd.o
+meson-drm-y += meson_encoder_hdmi.o
obj-$(CONFIG_DRM_MESON) += meson-drm.o
obj-$(CONFIG_DRM_MESON_DW_HDMI) += meson_dw_hdmi.o
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 923377f856de..45bfe9451db8 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -32,6 +32,7 @@
#include "meson_osd_afbcd.h"
#include "meson_registers.h"
#include "meson_venc_cvbs.h"
+#include "meson_encoder_hdmi.h"
#include "meson_viu.h"
#include "meson_vpp.h"
#include "meson_rdma.h"
@@ -318,6 +319,10 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
}
}
+ ret = meson_encoder_hdmi_init(priv);
+ if (ret)
+ goto free_drm;
+
ret = meson_plane_create(priv);
if (ret)
goto free_drm;
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 0afbd1e70bfc..fb540a503efe 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -22,14 +22,11 @@
#include <drm/drm_probe_helper.h>
#include <drm/drm_print.h>
-#include <linux/media-bus-format.h>
#include <linux/videodev2.h>
#include "meson_drv.h"
#include "meson_dw_hdmi.h"
#include "meson_registers.h"
-#include "meson_vclk.h"
-#include "meson_venc.h"
#define DRIVER_NAME "meson-dw-hdmi"
#define DRIVER_DESC "Amlogic Meson HDMI-TX DRM driver"
@@ -135,8 +132,6 @@ struct meson_dw_hdmi_data {
};
struct meson_dw_hdmi {
- struct drm_encoder encoder;
- struct drm_bridge bridge;
struct dw_hdmi_plat_data dw_plat_data;
struct meson_drm *priv;
struct device *dev;
@@ -148,12 +143,8 @@ struct meson_dw_hdmi {
struct regulator *hdmi_supply;
u32 irq_stat;
struct dw_hdmi *hdmi;
- unsigned long output_bus_fmt;
+ struct drm_bridge *bridge;
};
-#define encoder_to_meson_dw_hdmi(x) \
- container_of(x, struct meson_dw_hdmi, encoder)
-#define bridge_to_meson_dw_hdmi(x) \
- container_of(x, struct meson_dw_hdmi, bridge)
static inline int dw_hdmi_is_compatible(struct meson_dw_hdmi *dw_hdmi,
const char *compat)
@@ -295,14 +286,14 @@ static inline void dw_hdmi_dwc_write_bits(struct meson_dw_hdmi *dw_hdmi,
/* Setup PHY bandwidth modes */
static void meson_hdmi_phy_setup_mode(struct meson_dw_hdmi *dw_hdmi,
- const struct drm_display_mode *mode)
+ const struct drm_display_mode *mode,
+ bool mode_is_420)
{
struct meson_drm *priv = dw_hdmi->priv;
unsigned int pixel_clock = mode->clock;
/* For 420, pixel clock is half unlike venc clock */
- if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
- pixel_clock /= 2;
+ if (mode_is_420) pixel_clock /= 2;
if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi")) {
@@ -374,68 +365,25 @@ static inline void meson_dw_hdmi_phy_reset(struct meson_dw_hdmi *dw_hdmi)
mdelay(2);
}
-static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
- const struct drm_display_mode *mode)
-{
- struct meson_drm *priv = dw_hdmi->priv;
- int vic = drm_match_cea_mode(mode);
- unsigned int phy_freq;
- unsigned int vclk_freq;
- unsigned int venc_freq;
- unsigned int hdmi_freq;
-
- vclk_freq = mode->clock;
-
- /* For 420, pixel clock is half unlike venc clock */
- if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
- vclk_freq /= 2;
-
- /* TMDS clock is pixel_clock * 10 */
- phy_freq = vclk_freq * 10;
-
- if (!vic) {
- meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, phy_freq,
- vclk_freq, vclk_freq, vclk_freq, false);
- return;
- }
-
- /* 480i/576i needs global pixel doubling */
- if (mode->flags & DRM_MODE_FLAG_DBLCLK)
- vclk_freq *= 2;
-
- venc_freq = vclk_freq;
- hdmi_freq = vclk_freq;
-
- /* VENC double pixels for 1080i, 720p and YUV420 modes */
- if (meson_venc_hdmi_venc_repeat(vic) ||
- dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
- venc_freq *= 2;
-
- vclk_freq = max(venc_freq, hdmi_freq);
-
- if (mode->flags & DRM_MODE_FLAG_DBLCLK)
- venc_freq /= 2;
-
- DRM_DEBUG_DRIVER("vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n",
- phy_freq, vclk_freq, venc_freq, hdmi_freq,
- priv->venc.hdmi_use_enci);
-
- meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, phy_freq, vclk_freq,
- venc_freq, hdmi_freq, priv->venc.hdmi_use_enci);
-}
-
static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
const struct drm_display_info *display,
const struct drm_display_mode *mode)
{
struct meson_dw_hdmi *dw_hdmi = (struct meson_dw_hdmi *)data;
+ bool is_hdmi2_sink = display->hdmi.scdc.supported;
struct meson_drm *priv = dw_hdmi->priv;
unsigned int wr_clk =
readl_relaxed(priv->io_base + _REG(VPU_HDMI_SETTING));
+ bool mode_is_420 = false;
DRM_DEBUG_DRIVER("\"%s\" div%d\n", mode->name,
mode->clock > 340000 ? 40 : 10);
+ if (drm_mode_is_420_only(display, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(display, mode)))
+ mode_is_420 = true;
+
/* Enable clocks */
regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
@@ -457,8 +405,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
/* TMDS pattern setup */
- if (mode->clock > 340000 &&
- dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_YUV8_1X24) {
+ if (mode->clock > 340000 && !mode_is_420) {
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
0);
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
@@ -476,7 +423,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_CNTL, 0x2);
/* Setup PHY parameters */
- meson_hdmi_phy_setup_mode(dw_hdmi, mode);
+ meson_hdmi_phy_setup_mode(dw_hdmi, mode, mode_is_420);
/* Setup PHY */
regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
@@ -622,214 +569,15 @@ static irqreturn_t dw_hdmi_top_thread_irq(int irq, void *dev_id)
dw_hdmi_setup_rx_sense(dw_hdmi->hdmi, hpd_connected,
hpd_connected);
- drm_helper_hpd_irq_event(dw_hdmi->encoder.dev);
+ drm_helper_hpd_irq_event(dw_hdmi->bridge->dev);
+ drm_bridge_hpd_notify(dw_hdmi->bridge,
+ hpd_connected ? connector_status_connected
+ : connector_status_disconnected);
}
return IRQ_HANDLED;
}
-static enum drm_mode_status
-dw_hdmi_mode_valid(struct dw_hdmi *hdmi, void *data,
- const struct drm_display_info *display_info,
- const struct drm_display_mode *mode)
-{
- struct meson_dw_hdmi *dw_hdmi = data;
- struct meson_drm *priv = dw_hdmi->priv;
- bool is_hdmi2_sink = display_info->hdmi.scdc.supported;
- unsigned int phy_freq;
- unsigned int vclk_freq;
- unsigned int venc_freq;
- unsigned int hdmi_freq;
- int vic = drm_match_cea_mode(mode);
- enum drm_mode_status status;
-
- DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
-
- /* If sink does not support 540MHz, reject the non-420 HDMI2 modes */
- if (display_info->max_tmds_clock &&
- mode->clock > display_info->max_tmds_clock &&
- !drm_mode_is_420_only(display_info, mode) &&
- !drm_mode_is_420_also(display_info, mode))
- return MODE_BAD;
-
- /* Check against non-VIC supported modes */
- if (!vic) {
- status = meson_venc_hdmi_supported_mode(mode);
- if (status != MODE_OK)
- return status;
-
- return meson_vclk_dmt_supported_freq(priv, mode->clock);
- /* Check against supported VIC modes */
- } else if (!meson_venc_hdmi_supported_vic(vic))
- return MODE_BAD;
-
- vclk_freq = mode->clock;
-
- /* For 420, pixel clock is half unlike venc clock */
- if (drm_mode_is_420_only(display_info, mode) ||
- (!is_hdmi2_sink &&
- drm_mode_is_420_also(display_info, mode)))
- vclk_freq /= 2;
-
- /* TMDS clock is pixel_clock * 10 */
- phy_freq = vclk_freq * 10;
-
- /* 480i/576i needs global pixel doubling */
- if (mode->flags & DRM_MODE_FLAG_DBLCLK)
- vclk_freq *= 2;
-
- venc_freq = vclk_freq;
- hdmi_freq = vclk_freq;
-
- /* VENC double pixels for 1080i, 720p and YUV420 modes */
- if (meson_venc_hdmi_venc_repeat(vic) ||
- drm_mode_is_420_only(display_info, mode) ||
- (!is_hdmi2_sink &&
- drm_mode_is_420_also(display_info, mode)))
- venc_freq *= 2;
-
- vclk_freq = max(venc_freq, hdmi_freq);
-
- if (mode->flags & DRM_MODE_FLAG_DBLCLK)
- venc_freq /= 2;
-
- dev_dbg(dw_hdmi->dev, "%s: vclk:%d phy=%d venc=%d hdmi=%d\n",
- __func__, phy_freq, vclk_freq, venc_freq, hdmi_freq);
-
- return meson_vclk_vic_supported_freq(priv, phy_freq, vclk_freq);
-}
-
-/* Encoder */
-
-static const u32 meson_dw_hdmi_out_bus_fmts[] = {
- MEDIA_BUS_FMT_YUV8_1X24,
- MEDIA_BUS_FMT_UYYVYY8_0_5X24,
-};
-
-static void meson_venc_hdmi_encoder_destroy(struct drm_encoder *encoder)
-{
- drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs meson_venc_hdmi_encoder_funcs = {
- .destroy = meson_venc_hdmi_encoder_destroy,
-};
-
-static u32 *
-meson_venc_hdmi_encoder_get_inp_bus_fmts(struct drm_bridge *bridge,
- struct drm_bridge_state *bridge_state,
- struct drm_crtc_state *crtc_state,
- struct drm_connector_state *conn_state,
- u32 output_fmt,
- unsigned int *num_input_fmts)
-{
- u32 *input_fmts = NULL;
- int i;
-
- *num_input_fmts = 0;
-
- for (i = 0 ; i < ARRAY_SIZE(meson_dw_hdmi_out_bus_fmts) ; ++i) {
- if (output_fmt == meson_dw_hdmi_out_bus_fmts[i]) {
- *num_input_fmts = 1;
- input_fmts = kcalloc(*num_input_fmts,
- sizeof(*input_fmts),
- GFP_KERNEL);
- if (!input_fmts)
- return NULL;
-
- input_fmts[0] = output_fmt;
-
- break;
- }
- }
-
- return input_fmts;
-}
-
-static int meson_venc_hdmi_encoder_atomic_check(struct drm_bridge *bridge,
- struct drm_bridge_state *bridge_state,
- struct drm_crtc_state *crtc_state,
- struct drm_connector_state *conn_state)
-{
- struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
-
- dw_hdmi->output_bus_fmt = bridge_state->output_bus_cfg.format;
-
- DRM_DEBUG_DRIVER("output_bus_fmt %lx\n", dw_hdmi->output_bus_fmt);
-
- return 0;
-}
-
-static void meson_venc_hdmi_encoder_disable(struct drm_bridge *bridge)
-{
- struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
- struct meson_drm *priv = dw_hdmi->priv;
-
- DRM_DEBUG_DRIVER("\n");
-
- writel_bits_relaxed(0x3, 0,
- priv->io_base + _REG(VPU_HDMI_SETTING));
-
- writel_relaxed(0, priv->io_base + _REG(ENCI_VIDEO_EN));
- writel_relaxed(0, priv->io_base + _REG(ENCP_VIDEO_EN));
-}
-
-static void meson_venc_hdmi_encoder_enable(struct drm_bridge *bridge)
-{
- struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
- struct meson_drm *priv = dw_hdmi->priv;
-
- DRM_DEBUG_DRIVER("%s\n", priv->venc.hdmi_use_enci ? "VENCI" : "VENCP");
-
- if (priv->venc.hdmi_use_enci)
- writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
- else
- writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));
-}
-
-static void meson_venc_hdmi_encoder_mode_set(struct drm_bridge *bridge,
- const struct drm_display_mode *mode,
- const struct drm_display_mode *adjusted_mode)
-{
- struct meson_dw_hdmi *dw_hdmi = bridge_to_meson_dw_hdmi(bridge);
- struct meson_drm *priv = dw_hdmi->priv;
- int vic = drm_match_cea_mode(mode);
- unsigned int ycrcb_map = VPU_HDMI_OUTPUT_CBYCR;
- bool yuv420_mode = false;
-
- DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
-
- if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24) {
- ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
- yuv420_mode = true;
- }
-
- /* VENC + VENC-DVI Mode setup */
- meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, yuv420_mode, mode);
-
- /* VCLK Set clock */
- dw_hdmi_set_vclk(dw_hdmi, mode);
-
- if (dw_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
- /* Setup YUV420 to HDMI-TX, no 10bit diphering */
- writel_relaxed(2 | (2 << 2),
- priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
- else
- /* Setup YUV444 to HDMI-TX, no 10bit diphering */
- writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
-}
-
-static const struct drm_bridge_funcs meson_venc_hdmi_encoder_bridge_funcs = {
- .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
- .atomic_get_input_bus_fmts = meson_venc_hdmi_encoder_get_inp_bus_fmts,
- .atomic_reset = drm_atomic_helper_bridge_reset,
- .atomic_check = meson_venc_hdmi_encoder_atomic_check,
- .enable = meson_venc_hdmi_encoder_enable,
- .disable = meson_venc_hdmi_encoder_disable,
- .mode_set = meson_venc_hdmi_encoder_mode_set,
-};
-
/* DW HDMI Regmap */
static int meson_dw_hdmi_reg_read(void *context, unsigned int reg,
@@ -876,28 +624,6 @@ static const struct meson_dw_hdmi_data meson_dw_hdmi_g12a_data = {
.dwc_write = dw_hdmi_g12a_dwc_write,
};
-static bool meson_hdmi_connector_is_available(struct device *dev)
-{
- struct device_node *ep, *remote;
-
- /* HDMI Connector is on the second port, first endpoint */
- ep = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0);
- if (!ep)
- return false;
-
- /* If the endpoint node exists, consider it enabled */
- remote = of_graph_get_remote_port(ep);
- if (remote) {
- of_node_put(ep);
- return true;
- }
-
- of_node_put(ep);
- of_node_put(remote);
-
- return false;
-}
-
static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
{
struct meson_drm *priv = meson_dw_hdmi->priv;
@@ -976,18 +702,11 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
struct drm_device *drm = data;
struct meson_drm *priv = drm->dev_private;
struct dw_hdmi_plat_data *dw_plat_data;
- struct drm_bridge *next_bridge;
- struct drm_encoder *encoder;
int irq;
int ret;
DRM_DEBUG_DRIVER("\n");
- if (!meson_hdmi_connector_is_available(dev)) {
- dev_info(drm->dev, "HDMI Output connector not available\n");
- return -ENODEV;
- }
-
match = of_device_get_match_data(&pdev->dev);
if (!match) {
dev_err(&pdev->dev, "failed to get match data\n");
@@ -1003,7 +722,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
meson_dw_hdmi->dev = dev;
meson_dw_hdmi->data = match;
dw_plat_data = &meson_dw_hdmi->dw_plat_data;
- encoder = &meson_dw_hdmi->encoder;
meson_dw_hdmi->hdmi_supply = devm_regulator_get_optional(dev, "hdmi");
if (IS_ERR(meson_dw_hdmi->hdmi_supply)) {
@@ -1074,28 +792,11 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
return ret;
}
- /* Encoder */
-
- ret = drm_encoder_init(drm, encoder, &meson_venc_hdmi_encoder_funcs,
- DRM_MODE_ENCODER_TMDS, "meson_hdmi");
- if (ret) {
- dev_err(priv->dev, "Failed to init HDMI encoder\n");
- return ret;
- }
-
- meson_dw_hdmi->bridge.funcs = &meson_venc_hdmi_encoder_bridge_funcs;
- drm_bridge_attach(encoder, &meson_dw_hdmi->bridge, NULL, 0);
-
- encoder->possible_crtcs = BIT(0);
-
meson_dw_hdmi_init(meson_dw_hdmi);
- DRM_DEBUG_DRIVER("encoder initialized\n");
-
/* Bridge / Connector */
dw_plat_data->priv_data = meson_dw_hdmi;
- dw_plat_data->mode_valid = dw_hdmi_mode_valid;
dw_plat_data->phy_ops = &meson_dw_hdmi_phy_ops;
dw_plat_data->phy_name = "meson_dw_hdmi_phy";
dw_plat_data->phy_data = meson_dw_hdmi;
@@ -1110,15 +811,11 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
platform_set_drvdata(pdev, meson_dw_hdmi);
- meson_dw_hdmi->hdmi = dw_hdmi_probe(pdev,
- &meson_dw_hdmi->dw_plat_data);
+ meson_dw_hdmi->hdmi = dw_hdmi_probe(pdev, &meson_dw_hdmi->dw_plat_data);
if (IS_ERR(meson_dw_hdmi->hdmi))
return PTR_ERR(meson_dw_hdmi->hdmi);
- next_bridge = of_drm_find_bridge(pdev->dev.of_node);
- if (next_bridge)
- drm_bridge_attach(encoder, next_bridge,
- &meson_dw_hdmi->bridge, 0);
+ meson_dw_hdmi->bridge = of_drm_find_bridge(pdev->dev.of_node);
DRM_DEBUG_DRIVER("HDMI controller initialized\n");
diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
new file mode 100644
index 000000000000..db332fa4cd54
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_device.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include <linux/media-bus-format.h>
+#include <linux/videodev2.h>
+
+#include "meson_drv.h"
+#include "meson_registers.h"
+#include "meson_vclk.h"
+#include "meson_venc.h"
+#include "meson_encoder_hdmi.h"
+
+struct meson_encoder_hdmi {
+ struct drm_encoder encoder;
+ struct drm_bridge bridge;
+ struct drm_bridge *next_bridge;
+ struct meson_drm *priv;
+ unsigned long output_bus_fmt;
+};
+
+#define bridge_to_meson_encoder_hdmi(x) \
+ container_of(x, struct meson_encoder_hdmi, bridge)
+
+static int meson_encoder_hdmi_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+
+ return drm_bridge_attach(bridge->encoder, encoder_hdmi->next_bridge,
+ &encoder_hdmi->bridge, flags);
+}
+
+static void meson_encoder_hdmi_set_vclk(struct meson_encoder_hdmi *encoder_hdmi,
+ const struct drm_display_mode *mode)
+{
+ struct meson_drm *priv = encoder_hdmi->priv;
+ int vic = drm_match_cea_mode(mode);
+ unsigned int phy_freq;
+ unsigned int vclk_freq;
+ unsigned int venc_freq;
+ unsigned int hdmi_freq;
+
+ vclk_freq = mode->clock;
+
+ /* For 420, pixel clock is half unlike venc clock */
+ if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ vclk_freq /= 2;
+
+ /* TMDS clock is pixel_clock * 10 */
+ phy_freq = vclk_freq * 10;
+
+ if (!vic) {
+ meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, phy_freq,
+ vclk_freq, vclk_freq, vclk_freq, false);
+ return;
+ }
+
+ /* 480i/576i needs global pixel doubling */
+ if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+ vclk_freq *= 2;
+
+ venc_freq = vclk_freq;
+ hdmi_freq = vclk_freq;
+
+ /* VENC double pixels for 1080i, 720p and YUV420 modes */
+ if (meson_venc_hdmi_venc_repeat(vic) ||
+ encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ venc_freq *= 2;
+
+ vclk_freq = max(venc_freq, hdmi_freq);
+
+ if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+ venc_freq /= 2;
+
+ dev_dbg(priv->dev, "vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n",
+ phy_freq, vclk_freq, venc_freq, hdmi_freq,
+ priv->venc.hdmi_use_enci);
+
+ meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, phy_freq, vclk_freq,
+ venc_freq, hdmi_freq, priv->venc.hdmi_use_enci);
+}
+
+static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_info *display_info,
+ const struct drm_display_mode *mode)
+{
+ struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+ struct meson_drm *priv = encoder_hdmi->priv;
+ bool is_hdmi2_sink = display_info->hdmi.scdc.supported;
+ unsigned int phy_freq;
+ unsigned int vclk_freq;
+ unsigned int venc_freq;
+ unsigned int hdmi_freq;
+ int vic = drm_match_cea_mode(mode);
+ enum drm_mode_status status;
+
+ dev_dbg(priv->dev, "Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
+
+ /* If sink does not support 540MHz, reject the non-420 HDMI2 modes */
+ if (display_info->max_tmds_clock &&
+ mode->clock > display_info->max_tmds_clock &&
+ !drm_mode_is_420_only(display_info, mode) &&
+ !drm_mode_is_420_also(display_info, mode))
+ return MODE_BAD;
+
+ /* Check against non-VIC supported modes */
+ if (!vic) {
+ status = meson_venc_hdmi_supported_mode(mode);
+ if (status != MODE_OK)
+ return status;
+
+ return meson_vclk_dmt_supported_freq(priv, mode->clock);
+ /* Check against supported VIC modes */
+ } else if (!meson_venc_hdmi_supported_vic(vic))
+ return MODE_BAD;
+
+ vclk_freq = mode->clock;
+
+ /* For 420, pixel clock is half unlike venc clock */
+ if (drm_mode_is_420_only(display_info, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(display_info, mode)))
+ vclk_freq /= 2;
+
+ /* TMDS clock is pixel_clock * 10 */
+ phy_freq = vclk_freq * 10;
+
+ /* 480i/576i needs global pixel doubling */
+ if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+ vclk_freq *= 2;
+
+ venc_freq = vclk_freq;
+ hdmi_freq = vclk_freq;
+
+ /* VENC double pixels for 1080i, 720p and YUV420 modes */
+ if (meson_venc_hdmi_venc_repeat(vic) ||
+ drm_mode_is_420_only(display_info, mode) ||
+ (!is_hdmi2_sink &&
+ drm_mode_is_420_also(display_info, mode)))
+ venc_freq *= 2;
+
+ vclk_freq = max(venc_freq, hdmi_freq);
+
+ if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+ venc_freq /= 2;
+
+ dev_dbg(priv->dev, "%s: vclk:%d phy=%d venc=%d hdmi=%d\n",
+ __func__, phy_freq, vclk_freq, venc_freq, hdmi_freq);
+
+ return meson_vclk_vic_supported_freq(priv, phy_freq, vclk_freq);
+}
+
+static void meson_encoder_hdmi_atomic_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state)
+{
+ struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+ struct drm_atomic_state *state = bridge_state->base.state;
+ unsigned int ycrcb_map = VPU_HDMI_OUTPUT_CBYCR;
+ struct meson_drm *priv = encoder_hdmi->priv;
+ struct drm_connector_state *conn_state;
+ const struct drm_display_mode *mode;
+ struct drm_crtc_state *crtc_state;
+ struct drm_connector *connector;
+ bool yuv420_mode = false;
+ int vic;
+
+ connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
+ if (WARN_ON(!connector))
+ return;
+
+ conn_state = drm_atomic_get_new_connector_state(state, connector);
+ if (WARN_ON(!conn_state))
+ return;
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
+ if (WARN_ON(!crtc_state))
+ return;
+
+ mode = &crtc_state->adjusted_mode;
+
+ vic = drm_match_cea_mode(mode);
+
+ dev_dbg(priv->dev, "\"%s\" vic %d\n", mode->name, vic);
+
+ if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24) {
+ ycrcb_map = VPU_HDMI_OUTPUT_CRYCB;
+ yuv420_mode = true;
+ }
+
+ /* VENC + VENC-DVI Mode setup */
+ meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, yuv420_mode, mode);
+
+ /* VCLK Set clock */
+ meson_encoder_hdmi_set_vclk(encoder_hdmi, mode);
+
+ if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+ /* Setup YUV420 to HDMI-TX, no 10bit diphering */
+ writel_relaxed(2 | (2 << 2),
+ priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+ else
+ /* Setup YUV444 to HDMI-TX, no 10bit diphering */
+ writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+
+ dev_dbg(priv->dev, "%s\n", priv->venc.hdmi_use_enci ? "VENCI" : "VENCP");
+
+ if (priv->venc.hdmi_use_enci)
+ writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
+ else
+ writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));
+}
+
+static void meson_encoder_hdmi_atomic_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state)
+{
+ struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+ struct meson_drm *priv = encoder_hdmi->priv;
+
+ writel_bits_relaxed(0x3, 0,
+ priv->io_base + _REG(VPU_HDMI_SETTING));
+
+ writel_relaxed(0, priv->io_base + _REG(ENCI_VIDEO_EN));
+ writel_relaxed(0, priv->io_base + _REG(ENCP_VIDEO_EN));
+}
+
+static const u32 meson_encoder_hdmi_out_bus_fmts[] = {
+ MEDIA_BUS_FMT_YUV8_1X24,
+ MEDIA_BUS_FMT_UYYVYY8_0_5X24,
+};
+
+static u32 *
+meson_encoder_hdmi_get_inp_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts = NULL;
+ int i;
+
+ *num_input_fmts = 0;
+
+ for (i = 0 ; i < ARRAY_SIZE(meson_encoder_hdmi_out_bus_fmts) ; ++i) {
+ if (output_fmt == meson_encoder_hdmi_out_bus_fmts[i]) {
+ *num_input_fmts = 1;
+ input_fmts = kcalloc(*num_input_fmts,
+ sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = output_fmt;
+
+ break;
+ }
+ }
+
+ return input_fmts;
+}
+
+static int meson_encoder_hdmi_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+ struct drm_connector_state *old_conn_state =
+ drm_atomic_get_old_connector_state(conn_state->state, conn_state->connector);
+ struct meson_drm *priv = encoder_hdmi->priv;
+
+ encoder_hdmi->output_bus_fmt = bridge_state->output_bus_cfg.format;
+
+ dev_dbg(priv->dev, "output_bus_fmt %lx\n", encoder_hdmi->output_bus_fmt);
+
+ if (!drm_connector_atomic_hdr_metadata_equal(old_conn_state, conn_state))
+ crtc_state->mode_changed = true;
+
+ return 0;
+}
+
+static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
+ .attach = meson_encoder_hdmi_attach,
+ .mode_valid = meson_encoder_hdmi_mode_valid,
+ .atomic_enable = meson_encoder_hdmi_atomic_enable,
+ .atomic_disable = meson_encoder_hdmi_atomic_disable,
+ .atomic_get_input_bus_fmts = meson_encoder_hdmi_get_inp_bus_fmts,
+ .atomic_check = meson_encoder_hdmi_atomic_check,
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
+};
+
+int meson_encoder_hdmi_init(struct meson_drm *priv)
+{
+ struct meson_encoder_hdmi *meson_encoder_hdmi;
+ struct device_node *remote;
+ int ret;
+
+ meson_encoder_hdmi = devm_kzalloc(priv->dev, sizeof(*meson_encoder_hdmi), GFP_KERNEL);
+ if (!meson_encoder_hdmi)
+ return -ENOMEM;
+
+ /* HDMI Transceiver Bridge */
+ remote = of_graph_get_remote_node(priv->dev->of_node, 1, 0);
+ if (!remote) {
+ dev_err(priv->dev, "HDMI transceiver device is disabled");
+ return 0;
+ }
+
+ meson_encoder_hdmi->next_bridge = of_drm_find_bridge(remote);
+ if (!meson_encoder_hdmi->next_bridge) {
+ dev_err(priv->dev, "Failed to find HDMI transceiver bridge\n");
+ return -EPROBE_DEFER;
+ }
+
+ /* HDMI Encoder Bridge */
+ meson_encoder_hdmi->bridge.funcs = &meson_encoder_hdmi_bridge_funcs;
+ meson_encoder_hdmi->bridge.of_node = priv->dev->of_node;
+ meson_encoder_hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
+
+ drm_bridge_add(&meson_encoder_hdmi->bridge);
+
+ meson_encoder_hdmi->priv = priv;
+
+ /* Encoder */
+ ret = drm_simple_encoder_init(priv->drm, &meson_encoder_hdmi->encoder,
+ DRM_MODE_ENCODER_TMDS);
+ if (ret) {
+ dev_err(priv->dev, "Failed to init HDMI encoder: %d\n", ret);
+ return ret;
+ }
+
+ meson_encoder_hdmi->encoder.possible_crtcs = BIT(0);
+
+ /* Attach HDMI Encoder Bridge to Encoder */
+ ret = drm_bridge_attach(&meson_encoder_hdmi->encoder, &meson_encoder_hdmi->bridge, NULL, 0);
+ if (ret) {
+ dev_err(priv->dev, "Failed to attach bridge: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * We should have now in place:
+ * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[dw-hdmi connector]
+ */
+
+ dev_dbg(priv->dev, "HDMI encoder initialized\n");
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.h b/drivers/gpu/drm/meson/meson_encoder_hdmi.h
new file mode 100644
index 000000000000..ed19494f0956
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2021 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ */
+
+#ifndef __MESON_ENCODER_HDMI_H
+#define __MESON_ENCODER_HDMI_H
+
+int meson_encoder_hdmi_init(struct meson_drm *priv);
+
+#endif /* __MESON_ENCODER_HDMI_H */
--
2.34.1
From: Guillaume Nault <[email protected]>
[ Upstream commit 544b4dd568e3b09c1ab38a759d3187e7abda11a0 ]
The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set ->flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of ->flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
->flowi4_tos and initialises ->flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.
Fix this by extracting the ->flowi4_tos and ->flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.
Note 1: We can't sanitise ->flowi4_tos and ->flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in ->flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().
Note 2: The problem is mostly about sanitising ->flowi4_tos. Having
->flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.
Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Guillaume Nault <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/route.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 23833660584d..ed9b6842a9a0 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -506,6 +506,15 @@ void __ip_select_ident(struct net *net, struct iphdr *iph, int segs)
}
EXPORT_SYMBOL(__ip_select_ident);
+static void ip_rt_fix_tos(struct flowi4 *fl4)
+{
+ __u8 tos = RT_FL_TOS(fl4);
+
+ fl4->flowi4_tos = tos & IPTOS_RT_MASK;
+ fl4->flowi4_scope = tos & RTO_ONLINK ?
+ RT_SCOPE_LINK : RT_SCOPE_UNIVERSE;
+}
+
static void __build_flow_key(const struct net *net, struct flowi4 *fl4,
const struct sock *sk,
const struct iphdr *iph,
@@ -831,6 +840,7 @@ static void ip_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_buf
rt = (struct rtable *) dst;
__build_flow_key(net, &fl4, sk, iph, oif, tos, prot, mark, 0);
+ ip_rt_fix_tos(&fl4);
__ip_do_redirect(rt, skb, &fl4, true);
}
@@ -1055,6 +1065,7 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
struct flowi4 fl4;
ip_rt_build_flow_key(&fl4, sk, skb);
+ ip_rt_fix_tos(&fl4);
/* Don't make lookup fail for bridged encapsulations */
if (skb && netif_is_any_bridge_port(skb->dev))
@@ -1129,6 +1140,8 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu)
goto out;
new = true;
+ } else {
+ ip_rt_fix_tos(&fl4);
}
__ip_rt_update_pmtu((struct rtable *)xfrm_dst_path(&rt->dst), &fl4, mtu);
@@ -2609,7 +2622,6 @@ static struct rtable *__mkroute_output(const struct fib_result *res,
struct rtable *ip_route_output_key_hash(struct net *net, struct flowi4 *fl4,
const struct sk_buff *skb)
{
- __u8 tos = RT_FL_TOS(fl4);
struct fib_result res = {
.type = RTN_UNSPEC,
.fi = NULL,
@@ -2619,9 +2631,7 @@ struct rtable *ip_route_output_key_hash(struct net *net, struct flowi4 *fl4,
struct rtable *rth;
fl4->flowi4_iif = LOOPBACK_IFINDEX;
- fl4->flowi4_tos = tos & IPTOS_RT_MASK;
- fl4->flowi4_scope = ((tos & RTO_ONLINK) ?
- RT_SCOPE_LINK : RT_SCOPE_UNIVERSE);
+ ip_rt_fix_tos(fl4);
rcu_read_lock();
rth = ip_route_output_key_hash_rcu(net, fl4, &res, skb);
--
2.34.1
From: Fabiano Rosas <[email protected]>
[ Upstream commit 69ab6ac380a00244575de02c406dcb9491bf3368 ]
The return of the function is being shadowed by the call to
kvmppc_uvmem_init.
Fixes: ca9f4942670c ("KVM: PPC: Book3S HV: Support for running secure guests")
Signed-off-by: Fabiano Rosas <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/book3s_hv.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index a2fd1db29f7e..7fa685711669 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -6101,8 +6101,11 @@ static int kvmppc_book3s_init_hv(void)
if (r)
return r;
- if (kvmppc_radix_possible())
+ if (kvmppc_radix_possible()) {
r = kvmppc_radix_init();
+ if (r)
+ return r;
+ }
r = kvmppc_uvmem_init();
if (r < 0)
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit f8b12dfb476dad38ce755aaf5e2df46f06f1822e ]
All fields of the kek_mgmt_req structure have the type __le32. So make sure
to use cpu_to_le32() to initialize them. This suppresses the sparse
warning:
warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [assigned] [usertype] new_curidx_ksop
got int
Link: https://lore.kernel.org/r/[email protected]
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 69789aa73fd1..e606a9b1c3af 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1406,12 +1406,13 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
/* Currently only one key is used. New KEK index is 1.
* Current KEK index is 1. Store KEK to NVRAM is 1.
*/
- payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) |
- KEK_MGMT_SUBOP_KEYCARDUPDATE);
+ payload.new_curidx_ksop =
+ cpu_to_le32(((1 << 24) | (1 << 16) | (1 << 8) |
+ KEK_MGMT_SUBOP_KEYCARDUPDATE));
pm8001_dbg(pm8001_ha, DEV,
"Saving Encryption info to flash. payload 0x%x\n",
- payload.new_curidx_ksop);
+ le32_to_cpu(payload.new_curidx_ksop));
rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
sizeof(payload), 0);
--
2.34.1
From: Kuldeep Singh <[email protected]>
[ Upstream commit c953c764e505428f59ffe6afb1c73b89b5b1ac35 ]
Broadcom ns2 platform has spi-cpol and spi-cpho properties set
incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are
of flag or boolean type and not integer type. Fix the values.
Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2)
Signed-off-by: Kuldeep Singh <[email protected]>
CC: Ray Jui <[email protected]>
CC: Scott Branden <[email protected]>
CC: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index ec19fbf928a1..12a4b1c03390 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -111,8 +111,8 @@
compatible = "silabs,si3226x";
reg = <0>;
spi-max-frequency = <5000000>;
- spi-cpha = <1>;
- spi-cpol = <1>;
+ spi-cpha;
+ spi-cpol;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable = <0>;
@@ -135,8 +135,8 @@
at25,byte-len = <0x8000>;
at25,addr-mode = <2>;
at25,page-size = <64>;
- spi-cpha = <1>;
- spi-cpol = <1>;
+ spi-cpha;
+ spi-cpol;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable = <0>;
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 591cdccebdd4d02eb46d400dea911136400cc567 ]
Fix a possible race in mt7921_pm_power_save_work() if rx/tx napi
schedules ps_work and we are currently accessing device register
on a different cpu.
Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 04a288029c98..c093920a597d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -1550,6 +1550,14 @@ void mt7921_pm_power_save_work(struct work_struct *work)
test_bit(MT76_HW_SCHED_SCANNING, &mphy->state))
goto out;
+ if (mutex_is_locked(&dev->mt76.mutex))
+ /* if mt76 mutex is held we should not put the device
+ * to sleep since we are currently accessing device
+ * register map. We need to wait for the next power_save
+ * trigger.
+ */
+ goto out;
+
if (time_is_after_jiffies(dev->pm.last_activity + delta)) {
delta = dev->pm.last_activity + delta - jiffies;
goto out;
--
2.34.1
From: Xiaomeng Tong <[email protected]>
[ Upstream commit 6da69b1da130e7d96766042750cd9f902e890eba ]
The bug is here:
return rule;
The list iterator value 'rule' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, return 'rule' when found, otherwise return NULL.
Fixes: ae7a5aff783c7 ("net: dsa: bcm_sf2: Keep copy of inserted rules")
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Xiaomeng Tong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/bcm_sf2_cfp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index a7e2fcf2df2c..edbe5e7f1cb6 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -567,14 +567,14 @@ static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
static struct cfp_rule *bcm_sf2_cfp_rule_find(struct bcm_sf2_priv *priv,
int port, u32 location)
{
- struct cfp_rule *rule = NULL;
+ struct cfp_rule *rule;
list_for_each_entry(rule, &priv->cfp.rules_list, next) {
if (rule->port == port && rule->fs.location == location)
- break;
+ return rule;
}
- return rule;
+ return NULL;
}
static int bcm_sf2_cfp_rule_cmp(struct bcm_sf2_priv *priv, int port,
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 4a39156166b90465da0f9a33b3442d63b5651bec ]
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Also, we can create a variable for the mask to solve the
alignment issue.
Fixes: 334dd38a3878 ("drm/v3d: Set dma_mask as well as coherent_dma_mask")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Melissa Wen <[email protected]>
Signed-off-by: Melissa Wen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/v3d/v3d_drv.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
index 9403c3b36aca..6407a006d6ec 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.c
+++ b/drivers/gpu/drm/v3d/v3d_drv.c
@@ -221,6 +221,7 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
int ret;
u32 mmu_debug;
u32 ident1;
+ u64 mask;
v3d = devm_drm_dev_alloc(dev, &v3d_drm_driver, struct v3d_dev, drm);
@@ -240,8 +241,11 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
return ret;
mmu_debug = V3D_READ(V3D_MMU_DEBUG_INFO);
- dma_set_mask_and_coherent(dev,
- DMA_BIT_MASK(30 + V3D_GET_FIELD(mmu_debug, V3D_MMU_PA_WIDTH)));
+ mask = DMA_BIT_MASK(30 + V3D_GET_FIELD(mmu_debug, V3D_MMU_PA_WIDTH));
+ ret = dma_set_mask_and_coherent(dev, mask);
+ if (ret)
+ return ret;
+
v3d->va_width = 30 + V3D_GET_FIELD(mmu_debug, V3D_MMU_VA_WIDTH);
ident1 = V3D_READ(V3D_HUB_IDENT1);
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 8fffa0e3451abdd84e4b4e427f7e66040eb24f43 ]
Convert almost all SEC("xdp_blah") uses to strict SEC("xdp") to comply
with strict libbpf 1.0 logic of exact section name match for XDP program
types. There is only one exception, which is only tested through
iproute2 and defines multiple XDP programs within the same BPF object.
Given iproute2 still works in non-strict libbpf mode and it doesn't have
means to specify XDP programs by its name (not section name/title),
leave that single file alone for now until iproute2 gains lookup by
function/program name.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Dave Marchevsky <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/progs/test_map_in_map.c | 2 +-
.../selftests/bpf/progs/test_tcp_check_syncookie_kern.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp.c | 2 +-
.../testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c | 2 +-
.../selftests/bpf/progs/test_xdp_adjust_tail_shrink.c | 4 +---
tools/testing/selftests/bpf/progs/test_xdp_devmap_helpers.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp_link.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp_loop.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp_noinline.c | 4 ++--
.../selftests/bpf/progs/test_xdp_with_cpumap_helpers.c | 4 ++--
.../selftests/bpf/progs/test_xdp_with_devmap_helpers.c | 4 ++--
tools/testing/selftests/bpf/progs/xdp_dummy.c | 2 +-
tools/testing/selftests/bpf/progs/xdp_redirect_multi_kern.c | 4 ++--
tools/testing/selftests/bpf/progs/xdping_kern.c | 4 ++--
tools/testing/selftests/bpf/test_tcp_check_syncookie.sh | 2 +-
tools/testing/selftests/bpf/test_xdp_redirect.sh | 4 ++--
tools/testing/selftests/bpf/test_xdp_redirect_multi.sh | 2 +-
tools/testing/selftests/bpf/test_xdp_veth.sh | 4 ++--
tools/testing/selftests/bpf/xdping.c | 5 ++---
19 files changed, 27 insertions(+), 30 deletions(-)
diff --git a/tools/testing/selftests/bpf/progs/test_map_in_map.c b/tools/testing/selftests/bpf/progs/test_map_in_map.c
index 1cfeb940cf9f..5f0e0bfc151e 100644
--- a/tools/testing/selftests/bpf/progs/test_map_in_map.c
+++ b/tools/testing/selftests/bpf/progs/test_map_in_map.c
@@ -23,7 +23,7 @@ struct {
__uint(value_size, sizeof(__u32));
} mim_hash SEC(".maps");
-SEC("xdp_mimtest")
+SEC("xdp")
int xdp_mimtest0(struct xdp_md *ctx)
{
int value = 123;
diff --git a/tools/testing/selftests/bpf/progs/test_tcp_check_syncookie_kern.c b/tools/testing/selftests/bpf/progs/test_tcp_check_syncookie_kern.c
index 47cbe2eeae43..fac7ef99f9a6 100644
--- a/tools/testing/selftests/bpf/progs/test_tcp_check_syncookie_kern.c
+++ b/tools/testing/selftests/bpf/progs/test_tcp_check_syncookie_kern.c
@@ -156,7 +156,7 @@ int check_syncookie_clsact(struct __sk_buff *skb)
return TC_ACT_OK;
}
-SEC("xdp/check_syncookie")
+SEC("xdp")
int check_syncookie_xdp(struct xdp_md *ctx)
{
check_syncookie(ctx, (void *)(long)ctx->data,
diff --git a/tools/testing/selftests/bpf/progs/test_xdp.c b/tools/testing/selftests/bpf/progs/test_xdp.c
index 31f9bce37491..e6aa2fc6ce6b 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp.c
@@ -210,7 +210,7 @@ static __always_inline int handle_ipv6(struct xdp_md *xdp)
return XDP_TX;
}
-SEC("xdp_tx_iptunnel")
+SEC("xdp")
int _xdp_tx_iptunnel(struct xdp_md *xdp)
{
void *data_end = (void *)(long)xdp->data_end;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c b/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c
index 3d66599eee2e..199c61b7d062 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c
@@ -2,7 +2,7 @@
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
-SEC("xdp_adjust_tail_grow")
+SEC("xdp")
int _xdp_adjust_tail_grow(struct xdp_md *xdp)
{
void *data_end = (void *)(long)xdp->data_end;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_shrink.c b/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_shrink.c
index 22065a9cfb25..b7448253d135 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_shrink.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_shrink.c
@@ -9,9 +9,7 @@
#include <linux/if_ether.h>
#include <bpf/bpf_helpers.h>
-int _version SEC("version") = 1;
-
-SEC("xdp_adjust_tail_shrink")
+SEC("xdp")
int _xdp_adjust_tail_shrink(struct xdp_md *xdp)
{
void *data_end = (void *)(long)xdp->data_end;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_devmap_helpers.c b/tools/testing/selftests/bpf/progs/test_xdp_devmap_helpers.c
index b360ba2bd441..807bf895f42c 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_devmap_helpers.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_devmap_helpers.c
@@ -5,7 +5,7 @@
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
-SEC("xdp_dm_log")
+SEC("xdp")
int xdpdm_devlog(struct xdp_md *ctx)
{
char fmt[] = "devmap redirect: dev %u -> dev %u len %u\n";
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_link.c b/tools/testing/selftests/bpf/progs/test_xdp_link.c
index eb93ea95d1d8..ee7d6ac0f615 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_link.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_link.c
@@ -5,7 +5,7 @@
char LICENSE[] SEC("license") = "GPL";
-SEC("xdp/handler")
+SEC("xdp")
int xdp_handler(struct xdp_md *xdp)
{
return 0;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_loop.c b/tools/testing/selftests/bpf/progs/test_xdp_loop.c
index fcabcda30ba3..27eb52dda92c 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_loop.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_loop.c
@@ -206,7 +206,7 @@ static __always_inline int handle_ipv6(struct xdp_md *xdp)
return XDP_TX;
}
-SEC("xdp_tx_iptunnel")
+SEC("xdp")
int _xdp_tx_iptunnel(struct xdp_md *xdp)
{
void *data_end = (void *)(long)xdp->data_end;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c
index 3a67921f62b5..596c4e71bf3a 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c
@@ -797,7 +797,7 @@ static int process_packet(void *data, __u64 off, void *data_end,
return XDP_DROP;
}
-SEC("xdp-test-v4")
+SEC("xdp")
int balancer_ingress_v4(struct xdp_md *ctx)
{
void *data = (void *)(long)ctx->data;
@@ -816,7 +816,7 @@ int balancer_ingress_v4(struct xdp_md *ctx)
return XDP_DROP;
}
-SEC("xdp-test-v6")
+SEC("xdp")
int balancer_ingress_v6(struct xdp_md *ctx)
{
void *data = (void *)(long)ctx->data;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_with_cpumap_helpers.c b/tools/testing/selftests/bpf/progs/test_xdp_with_cpumap_helpers.c
index 59ee4f182ff8..532025057711 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_with_cpumap_helpers.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_with_cpumap_helpers.c
@@ -12,13 +12,13 @@ struct {
__uint(max_entries, 4);
} cpu_map SEC(".maps");
-SEC("xdp_redir")
+SEC("xdp")
int xdp_redir_prog(struct xdp_md *ctx)
{
return bpf_redirect_map(&cpu_map, 1, 0);
}
-SEC("xdp_dummy")
+SEC("xdp")
int xdp_dummy_prog(struct xdp_md *ctx)
{
return XDP_PASS;
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_with_devmap_helpers.c b/tools/testing/selftests/bpf/progs/test_xdp_with_devmap_helpers.c
index 0ac086497722..1e6b9c38ea6d 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_with_devmap_helpers.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_with_devmap_helpers.c
@@ -9,7 +9,7 @@ struct {
__uint(max_entries, 4);
} dm_ports SEC(".maps");
-SEC("xdp_redir")
+SEC("xdp")
int xdp_redir_prog(struct xdp_md *ctx)
{
return bpf_redirect_map(&dm_ports, 1, 0);
@@ -18,7 +18,7 @@ int xdp_redir_prog(struct xdp_md *ctx)
/* invalid program on DEVMAP entry;
* SEC name means expected attach type not set
*/
-SEC("xdp_dummy")
+SEC("xdp")
int xdp_dummy_prog(struct xdp_md *ctx)
{
return XDP_PASS;
diff --git a/tools/testing/selftests/bpf/progs/xdp_dummy.c b/tools/testing/selftests/bpf/progs/xdp_dummy.c
index ea25e8881992..d988b2e0cee8 100644
--- a/tools/testing/selftests/bpf/progs/xdp_dummy.c
+++ b/tools/testing/selftests/bpf/progs/xdp_dummy.c
@@ -4,7 +4,7 @@
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
-SEC("xdp_dummy")
+SEC("xdp")
int xdp_dummy_prog(struct xdp_md *ctx)
{
return XDP_PASS;
diff --git a/tools/testing/selftests/bpf/progs/xdp_redirect_multi_kern.c b/tools/testing/selftests/bpf/progs/xdp_redirect_multi_kern.c
index 880debcbcd65..8395782b6e0a 100644
--- a/tools/testing/selftests/bpf/progs/xdp_redirect_multi_kern.c
+++ b/tools/testing/selftests/bpf/progs/xdp_redirect_multi_kern.c
@@ -34,7 +34,7 @@ struct {
__uint(max_entries, 128);
} mac_map SEC(".maps");
-SEC("xdp_redirect_map_multi")
+SEC("xdp")
int xdp_redirect_map_multi_prog(struct xdp_md *ctx)
{
void *data_end = (void *)(long)ctx->data_end;
@@ -63,7 +63,7 @@ int xdp_redirect_map_multi_prog(struct xdp_md *ctx)
}
/* The following 2 progs are for 2nd devmap prog testing */
-SEC("xdp_redirect_map_ingress")
+SEC("xdp")
int xdp_redirect_map_all_prog(struct xdp_md *ctx)
{
return bpf_redirect_map(&map_egress, 0,
diff --git a/tools/testing/selftests/bpf/progs/xdping_kern.c b/tools/testing/selftests/bpf/progs/xdping_kern.c
index 6b9ca40bd1f4..4ad73847b8a5 100644
--- a/tools/testing/selftests/bpf/progs/xdping_kern.c
+++ b/tools/testing/selftests/bpf/progs/xdping_kern.c
@@ -86,7 +86,7 @@ static __always_inline int icmp_check(struct xdp_md *ctx, int type)
return XDP_TX;
}
-SEC("xdpclient")
+SEC("xdp")
int xdping_client(struct xdp_md *ctx)
{
void *data_end = (void *)(long)ctx->data_end;
@@ -150,7 +150,7 @@ int xdping_client(struct xdp_md *ctx)
return XDP_TX;
}
-SEC("xdpserver")
+SEC("xdp")
int xdping_server(struct xdp_md *ctx)
{
void *data_end = (void *)(long)ctx->data_end;
diff --git a/tools/testing/selftests/bpf/test_tcp_check_syncookie.sh b/tools/testing/selftests/bpf/test_tcp_check_syncookie.sh
index 9b3617d770a5..fed765157c53 100755
--- a/tools/testing/selftests/bpf/test_tcp_check_syncookie.sh
+++ b/tools/testing/selftests/bpf/test_tcp_check_syncookie.sh
@@ -77,7 +77,7 @@ TEST_IF=lo
MAX_PING_TRIES=5
BPF_PROG_OBJ="${DIR}/test_tcp_check_syncookie_kern.o"
CLSACT_SECTION="clsact/check_syncookie"
-XDP_SECTION="xdp/check_syncookie"
+XDP_SECTION="xdp"
BPF_PROG_ID=0
PROG="${DIR}/test_tcp_check_syncookie_user"
diff --git a/tools/testing/selftests/bpf/test_xdp_redirect.sh b/tools/testing/selftests/bpf/test_xdp_redirect.sh
index c033850886f4..57c8db9972a6 100755
--- a/tools/testing/selftests/bpf/test_xdp_redirect.sh
+++ b/tools/testing/selftests/bpf/test_xdp_redirect.sh
@@ -52,8 +52,8 @@ test_xdp_redirect()
return 0
fi
- ip -n ns1 link set veth11 $xdpmode obj xdp_dummy.o sec xdp_dummy &> /dev/null
- ip -n ns2 link set veth22 $xdpmode obj xdp_dummy.o sec xdp_dummy &> /dev/null
+ ip -n ns1 link set veth11 $xdpmode obj xdp_dummy.o sec xdp &> /dev/null
+ ip -n ns2 link set veth22 $xdpmode obj xdp_dummy.o sec xdp &> /dev/null
ip link set dev veth1 $xdpmode obj test_xdp_redirect.o sec redirect_to_222 &> /dev/null
ip link set dev veth2 $xdpmode obj test_xdp_redirect.o sec redirect_to_111 &> /dev/null
diff --git a/tools/testing/selftests/bpf/test_xdp_redirect_multi.sh b/tools/testing/selftests/bpf/test_xdp_redirect_multi.sh
index bedff7aa7023..05f872740999 100755
--- a/tools/testing/selftests/bpf/test_xdp_redirect_multi.sh
+++ b/tools/testing/selftests/bpf/test_xdp_redirect_multi.sh
@@ -92,7 +92,7 @@ setup_ns()
# Add a neigh entry for IPv4 ping test
ip -n ns$i neigh add 192.0.2.253 lladdr 00:00:00:00:00:01 dev veth0
ip -n ns$i link set veth0 $mode obj \
- xdp_dummy.o sec xdp_dummy &> /dev/null || \
+ xdp_dummy.o sec xdp &> /dev/null || \
{ test_fail "Unable to load dummy xdp" && exit 1; }
IFACES="$IFACES veth$i"
veth_mac[$i]=$(ip -n ns0 link show veth$i | awk '/link\/ether/ {print $2}')
diff --git a/tools/testing/selftests/bpf/test_xdp_veth.sh b/tools/testing/selftests/bpf/test_xdp_veth.sh
index 995278e684b6..a3a1eaee26ea 100755
--- a/tools/testing/selftests/bpf/test_xdp_veth.sh
+++ b/tools/testing/selftests/bpf/test_xdp_veth.sh
@@ -107,9 +107,9 @@ ip link set dev veth1 xdp pinned $BPF_DIR/progs/redirect_map_0
ip link set dev veth2 xdp pinned $BPF_DIR/progs/redirect_map_1
ip link set dev veth3 xdp pinned $BPF_DIR/progs/redirect_map_2
-ip -n ns1 link set dev veth11 xdp obj xdp_dummy.o sec xdp_dummy
+ip -n ns1 link set dev veth11 xdp obj xdp_dummy.o sec xdp
ip -n ns2 link set dev veth22 xdp obj xdp_tx.o sec xdp
-ip -n ns3 link set dev veth33 xdp obj xdp_dummy.o sec xdp_dummy
+ip -n ns3 link set dev veth33 xdp obj xdp_dummy.o sec xdp
trap cleanup EXIT
diff --git a/tools/testing/selftests/bpf/xdping.c b/tools/testing/selftests/bpf/xdping.c
index 842d9155d36c..79a3453dab25 100644
--- a/tools/testing/selftests/bpf/xdping.c
+++ b/tools/testing/selftests/bpf/xdping.c
@@ -178,9 +178,8 @@ int main(int argc, char **argv)
return 1;
}
- main_prog = bpf_object__find_program_by_title(obj,
- server ? "xdpserver" :
- "xdpclient");
+ main_prog = bpf_object__find_program_by_name(obj,
+ server ? "xdping_server" : "xdping_client");
if (main_prog)
prog_fd = bpf_program__fd(main_prog);
if (!main_prog || prog_fd < 0) {
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit ab818c7aa7544bf8d2dd4bdf68878b17a02eb332 ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/[email protected]
Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic")
Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc")
Cc: He Zhe <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Cc: Jason Wessel <[email protected]>
Cc: Daniel Thompson <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: [email protected]
Reported-by: Igor Zhbanov <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/kgdboc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 49d0c7f2b29b..79b7db8580e0 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -403,16 +403,16 @@ static int kgdboc_option_setup(char *opt)
{
if (!opt) {
pr_err("config string not provided\n");
- return -EINVAL;
+ return 1;
}
if (strlen(opt) >= MAX_CONFIG_LEN) {
pr_err("config string too long\n");
- return -ENOSPC;
+ return 1;
}
strcpy(config, opt);
- return 0;
+ return 1;
}
__setup("kgdboc=", kgdboc_option_setup);
--
2.34.1
From: Yong Wu <[email protected]>
[ Upstream commit 822a2ed8c606caf6a11b1a180b8e46292bd77d71 ]
When the iommu master device enters of_iommu_xlate, the ops may be
NULL(iommu dev is defered), then it will initialize the fwspec here:
[<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>]
(iommu_fwspec_init+0xbc/0xd4)
[<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>]
(of_iommu_xlate+0x7c/0x12c)
[<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>]
(of_iommu_configure+0x144/0x1e8)
BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit
weird. We always expect create the fwspec internally. otherwise it will
enter here and return fail.
static int mtk_iommu_create_mapping(struct device *dev,
struct of_phandle_args *args)
{
...
if (!fwspec) {
....
} else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) {
>>>>>>>>>>Enter here. return fail.<<<<<<<<<<<<
return -EINVAL;
}
...
}
Thus, Free the existed fwspec if the master device already has fwspec.
This issue is reported at:
https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/
Reported-by: Frank Wunderlich <[email protected]>
Tested-by: Frank Wunderlich <[email protected]> # BPI-R2/MT7623
Signed-off-by: Yong Wu <[email protected]>
Acked-by: Joerg Roedel <[email protected]>
Acked-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/mtk_iommu_v1.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index be22fcf988ce..1467ba1e4417 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -425,6 +425,15 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
struct mtk_iommu_data *data;
int err, idx = 0;
+ /*
+ * In the deferred case, free the existed fwspec.
+ * Always initialize the fwspec internally.
+ */
+ if (fwspec) {
+ iommu_fwspec_free(dev);
+ fwspec = dev_iommu_fwspec_get(dev);
+ }
+
while (!of_parse_phandle_with_args(dev->of_node, "iommus",
"#iommu-cells",
idx, &iommu_spec)) {
--
2.34.1
From: Souptick Joarder (HPE) <[email protected]>
[ Upstream commit e414c25e3399b2b3d7337dc47abccab5c71b7c8f ]
smatch warning was reported as below ->
smatch warnings:
drivers/irqchip/irq-nvic.c:131 nvic_of_init()
warn: 'nvic_base' not released on lines: 97.
Release nvic_base upon failure.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Souptick Joarder (HPE) <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-nvic.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
index 599bb6fc5f0a..47b3b165479e 100644
--- a/drivers/irqchip/irq-nvic.c
+++ b/drivers/irqchip/irq-nvic.c
@@ -92,6 +92,7 @@ static int __init nvic_of_init(struct device_node *node,
if (!nvic_irq_domain) {
pr_warn("Failed to allocate irq domain\n");
+ iounmap(nvic_base);
return -ENOMEM;
}
@@ -101,6 +102,7 @@ static int __init nvic_of_init(struct device_node *node,
if (ret) {
pr_warn("Failed to allocate irq chips\n");
irq_domain_remove(nvic_irq_domain);
+ iounmap(nvic_base);
return ret;
}
--
2.34.1
From: Dan Williams <[email protected]>
[ Upstream commit d9d290d7e659e9db3e4518040cc18b97f5535f4a ]
In preparation for removing BLK aperture support the NVDIMM unit tests
discovered that the default alignment can be set higher than the
capacity of the region. Fall back to PAGE_SIZE in that case.
Given this has not been seen in the wild, elide notifying -stable.
Fixes: 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute")
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/164688416128.2879318.17890707310125575258.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/region_devs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/nvdimm/region_devs.c b/drivers/nvdimm/region_devs.c
index 9ccf3d608799..70ad891a76ba 100644
--- a/drivers/nvdimm/region_devs.c
+++ b/drivers/nvdimm/region_devs.c
@@ -1025,6 +1025,9 @@ static unsigned long default_align(struct nd_region *nd_region)
}
}
+ if (nd_region->ndr_size < MEMREMAP_COMPAT_ALIGN_MAX)
+ align = PAGE_SIZE;
+
mappings = max_t(u16, 1, nd_region->ndr_mappings);
div_u64_rem(align, mappings, &remainder);
if (remainder)
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 78482af095abd9f4f29f1aa3fe575d25c6ae3028 ]
This code has two bugs:
1) "cnt" is 255 but the size of the buffer is 256 so the last byte is
not used.
2) If we try to print more than 255 characters then "cnt" will be
negative and that will trigger a WARN() in snprintf(). The fix for
this is to use scnprintf() instead of snprintf().
We can re-write this code to be cleaner:
1) Rename "offset" to "off" because that's shorter.
2) Get rid of the "cnt" variable and just use "size - off" directly.
3) Get rid of the "read" variable and just increment "off" directly.
Fixes: 96fe6a2109db ("fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/core/fbcvt.c | 53 +++++++++++++-------------------
1 file changed, 21 insertions(+), 32 deletions(-)
diff --git a/drivers/video/fbdev/core/fbcvt.c b/drivers/video/fbdev/core/fbcvt.c
index 55d2bd0ce5c0..64843464c661 100644
--- a/drivers/video/fbdev/core/fbcvt.c
+++ b/drivers/video/fbdev/core/fbcvt.c
@@ -214,9 +214,11 @@ static u32 fb_cvt_aspect_ratio(struct fb_cvt_data *cvt)
static void fb_cvt_print_name(struct fb_cvt_data *cvt)
{
u32 pixcount, pixcount_mod;
- int cnt = 255, offset = 0, read = 0;
- u8 *buf = kzalloc(256, GFP_KERNEL);
+ int size = 256;
+ int off = 0;
+ u8 *buf;
+ buf = kzalloc(size, GFP_KERNEL);
if (!buf)
return;
@@ -224,43 +226,30 @@ static void fb_cvt_print_name(struct fb_cvt_data *cvt)
pixcount_mod = (cvt->xres * (cvt->yres/cvt->interlace)) % 1000000;
pixcount_mod /= 1000;
- read = snprintf(buf+offset, cnt, "fbcvt: %dx%d@%d: CVT Name - ",
- cvt->xres, cvt->yres, cvt->refresh);
- offset += read;
- cnt -= read;
+ off += scnprintf(buf + off, size - off, "fbcvt: %dx%d@%d: CVT Name - ",
+ cvt->xres, cvt->yres, cvt->refresh);
- if (cvt->status)
- snprintf(buf+offset, cnt, "Not a CVT standard - %d.%03d Mega "
- "Pixel Image\n", pixcount, pixcount_mod);
- else {
- if (pixcount) {
- read = snprintf(buf+offset, cnt, "%d", pixcount);
- cnt -= read;
- offset += read;
- }
+ if (cvt->status) {
+ off += scnprintf(buf + off, size - off,
+ "Not a CVT standard - %d.%03d Mega Pixel Image\n",
+ pixcount, pixcount_mod);
+ } else {
+ if (pixcount)
+ off += scnprintf(buf + off, size - off, "%d", pixcount);
- read = snprintf(buf+offset, cnt, ".%03dM", pixcount_mod);
- cnt -= read;
- offset += read;
+ off += scnprintf(buf + off, size - off, ".%03dM", pixcount_mod);
if (cvt->aspect_ratio == 0)
- read = snprintf(buf+offset, cnt, "3");
+ off += scnprintf(buf + off, size - off, "3");
else if (cvt->aspect_ratio == 3)
- read = snprintf(buf+offset, cnt, "4");
+ off += scnprintf(buf + off, size - off, "4");
else if (cvt->aspect_ratio == 1 || cvt->aspect_ratio == 4)
- read = snprintf(buf+offset, cnt, "9");
+ off += scnprintf(buf + off, size - off, "9");
else if (cvt->aspect_ratio == 2)
- read = snprintf(buf+offset, cnt, "A");
- else
- read = 0;
- cnt -= read;
- offset += read;
-
- if (cvt->flags & FB_CVT_FLAG_REDUCED_BLANK) {
- read = snprintf(buf+offset, cnt, "-R");
- cnt -= read;
- offset += read;
- }
+ off += scnprintf(buf + off, size - off, "A");
+
+ if (cvt->flags & FB_CVT_FLAG_REDUCED_BLANK)
+ off += scnprintf(buf + off, size - off, "-R");
}
printk(KERN_INFO "%s\n", buf);
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 54fe55fb384ade630ef20b9a8b8f3b2a89ad97f2 ]
mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.
Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.
Also drop the assignment of pin config state to the group.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index bcf359256ed4..2133964dfd59 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -714,10 +714,10 @@ static int mtk_pconf_group_get(struct pinctrl_dev *pctldev, unsigned group,
unsigned long *config)
{
struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
+ struct mtk_pinctrl_group *grp = &hw->groups[group];
- *config = hw->groups[group].config;
-
- return 0;
+ /* One pin per group only */
+ return mtk_pinconf_get(pctldev, grp->pin, config);
}
static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
@@ -733,8 +733,6 @@ static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
pinconf_to_config_argument(configs[i]));
if (ret < 0)
return ret;
-
- grp->config = configs[i];
}
return 0;
--
2.34.1
From: Tobias Waldekranz <[email protected]>
[ Upstream commit 585d42bb57bb358d48906660a8de273b078810b1 ]
This chip has support for the same per-port policy actions found in
later versions of LinkStreet devices.
Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Signed-off-by: Tobias Waldekranz <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 056e3b65cd27..0830d7bb7a00 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3649,6 +3649,7 @@ static const struct mv88e6xxx_ops mv88e6097_ops = {
.port_sync_link = mv88e6185_port_sync_link,
.port_set_speed_duplex = mv88e6185_port_set_speed_duplex,
.port_tag_remap = mv88e6095_port_tag_remap,
+ .port_set_policy = mv88e6352_port_set_policy,
.port_set_frame_mode = mv88e6351_port_set_frame_mode,
.port_set_ucast_flood = mv88e6352_port_set_ucast_flood,
.port_set_mcast_flood = mv88e6352_port_set_mcast_flood,
--
2.34.1
From: Pin-Yen Lin <[email protected]>
[ Upstream commit d5c6f647aec9ed524aedd04a3aec5ebc21d39007 ]
The length of EDID block can be longer than 256 bytes, so we should use
`int` instead of `u8` for the `edid_pos` variable.
Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-Yen Lin <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index ea414cd349b5..392a9c56e9a0 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -791,7 +791,8 @@ static int segments_edid_read(struct anx7625_data *ctx,
static int sp_tx_edid_read(struct anx7625_data *ctx,
u8 *pedid_blocks_buf)
{
- u8 offset, edid_pos;
+ u8 offset;
+ int edid_pos;
int count, blocks_num;
u8 pblock_buf[MAX_DPCD_BUFFER_SIZE];
u8 i, j;
--
2.34.1
From: Martin Kaiser <[email protected]>
[ Upstream commit 1327fcf175fa63d3b7a058b8148ed7714acdc035 ]
Fix an endless loop in recv_func. If pending_frame is not NULL, we're
stuck in the while loop forever. We have to call rtw_alloc_recvframe
each time we loop.
Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Reported-by: Pavel Skripkin <[email protected]>
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/r8188eu/core/rtw_recv.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
index e082edfbaad8..30ca9f1e0363 100644
--- a/drivers/staging/r8188eu/core/rtw_recv.c
+++ b/drivers/staging/r8188eu/core/rtw_recv.c
@@ -1942,8 +1942,7 @@ static int recv_func(struct adapter *padapter, struct recv_frame *rframe)
struct recv_frame *pending_frame;
int cnt = 0;
- pending_frame = rtw_alloc_recvframe(&padapter->recvpriv.uc_swdec_pending_queue);
- while (pending_frame) {
+ while ((pending_frame = rtw_alloc_recvframe(&padapter->recvpriv.uc_swdec_pending_queue))) {
cnt++;
recv_func_posthandle(padapter, pending_frame);
}
--
2.34.1
From: Chun-Jie Chen <[email protected]>
[ Upstream commit ac0ca395543af061f7ad77afcda0afb323d82468 ]
Due to some power domain needs to keep on for wakeup in system suspend,
so add GENPD_FLAG_ACTIVE_WAKEUP support in Mediatek power domain driver.
Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Chun-Jie Chen <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/mediatek/mtk-pm-domains.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index b762bc40f56b..afd2fd74802d 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -443,6 +443,9 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
pd->genpd.power_off = scpsys_power_off;
pd->genpd.power_on = scpsys_power_on;
+ if (MTK_SCPD_CAPS(pd, MTK_SCPD_ACTIVE_WAKEUP))
+ pd->genpd.flags |= GENPD_FLAG_ACTIVE_WAKEUP;
+
if (MTK_SCPD_CAPS(pd, MTK_SCPD_KEEP_DEFAULT_OFF))
pm_genpd_init(&pd->genpd, NULL, true);
else
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit f590797fa3c1bccdd19e55441592a23b46aef449 ]
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function.
Calling of_node_put() to avoid the refcount leak.
Fixes: 531f67e41dcd ("ASoC: at91sam9g20ek-wm8731: convert to dt support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Codrin Ciubotariu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/atmel/sam9g20_wm8731.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index ed1f69b57024..8a55d59a6c2a 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -214,6 +214,7 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
if (!cpu_np) {
dev_err(&pdev->dev, "dai and pcm info missing\n");
+ of_node_put(codec_np);
return -EINVAL;
}
at91sam9g20ek_dai.cpus->of_node = cpu_np;
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit e6e1e7b19fa132d23d09c465942aab4c110d3da9 ]
When CONFIG_MCF_EDMA is set (due to COMPILE_TEST, not due to
CONFIG_M5441x), coldfire/device.c has compile errors due to
missing MCFEDMA_* symbols. In the .config file that was provided,
CONFIG_M5206=y, not CONFIG_M5441x, so <asm/m5441xsim.h> is not
included in coldfire/device.c.
Only build the MCF_EDMA code in coldfire/device.c if the MCFEDMA_*
hardware macros are defined.
Fixes these build errors:
../arch/m68k/coldfire/device.c:512:35: error: 'MCFEDMA_BASE' undeclared here (not in a function); did you mean 'MCFDMA_BASE1'?
512 | .start = MCFEDMA_BASE,
../arch/m68k/coldfire/device.c:513:50: error: 'MCFEDMA_SIZE' undeclared here (not in a function)
513 | .end = MCFEDMA_BASE + MCFEDMA_SIZE - 1,
../arch/m68k/coldfire/device.c:517:35: error: 'MCFEDMA_IRQ_INTR0' undeclared here (not in a function)
517 | .start = MCFEDMA_IRQ_INTR0,
../arch/m68k/coldfire/device.c:523:35: error: 'MCFEDMA_IRQ_INTR16' undeclared here (not in a function)
523 | .start = MCFEDMA_IRQ_INTR16,
../arch/m68k/coldfire/device.c:529:35: error: 'MCFEDMA_IRQ_INTR56' undeclared here (not in a function)
529 | .start = MCFEDMA_IRQ_INTR56,
../arch/m68k/coldfire/device.c:535:35: error: 'MCFEDMA_IRQ_ERR' undeclared here (not in a function)
535 | .start = MCFEDMA_IRQ_ERR,
Fixes: d7e9d01ac292 ("m68k: add ColdFire mcf5441x eDMA platform support")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Angelo Dureghello <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/coldfire/device.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
index 0386252e9d04..4218750414bb 100644
--- a/arch/m68k/coldfire/device.c
+++ b/arch/m68k/coldfire/device.c
@@ -480,7 +480,7 @@ static struct platform_device mcf_i2c5 = {
#endif /* MCFI2C_BASE5 */
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
static const struct dma_slave_map mcf_edma_map[] = {
{ "dreq0", "rx-tx", MCF_EDMA_FILTER_PARAM(0) },
@@ -552,7 +552,7 @@ static struct platform_device mcf_edma = {
.platform_data = &mcf_edma_data,
}
};
-#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
+#endif /* MCFEDMA_BASE */
#ifdef MCFSDHC_BASE
static struct mcf_esdhc_platform_data mcf_esdhc_data = {
@@ -651,7 +651,7 @@ static struct platform_device *mcf_devices[] __initdata = {
&mcf_i2c5,
#endif
#endif
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
&mcf_edma,
#endif
#ifdef MCFSDHC_BASE
--
2.34.1
From: Robert Marko <[email protected]>
[ Upstream commit bf8f5182b8f59309809b41c1d1730ed9ca6134b1 ]
Fix PCI-E clock related kernel oops that are caused by a missing clock
parent.
pcie0_rchng_clk_src has num_parents set to 2 but only one parent is
actually set via parent_hws, it should also have "XO" defined.
This will cause the kernel to panic on a NULL pointer in
clk_core_get_parent_by_index().
So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent
data.
Since there is already an existing static const char * const gcc_xo_gpll0[]
used to provide the same parents via parent_names convert those users to
clk_parent_data as well.
Without this earlycon is needed to even catch the OOPS as it will reset
the board before serial is initialized with the following:
[ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000
[ 0.232322] Mem abort info:
[ 0.239094] ESR = 0x96000004
[ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.244908] SET = 0, FnV = 0
[ 0.250377] EA = 0, S1PTW = 0
[ 0.253236] FSC = 0x04: level 0 translation fault
[ 0.256277] Data abort info:
[ 0.261141] ISV = 0, ISS = 0x00000004
[ 0.264262] CM = 0, WnR = 0
[ 0.267820] [0000a00000000000] address between user and kernel address ranges
[ 0.270954] Internal error: Oops: 96000004 [#1] SMP
[ 0.278067] Modules linked in:
[ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0
[ 0.285882] Hardware name: Xiaomi AX3600 (DT)
[ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec
[ 0.303067] lr : __clk_register+0x1d8/0x820
[ 0.308273] sp : ffffffc01111b7d0
[ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040
[ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800
[ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828
[ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020
[ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a
[ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006
[ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000
[ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06
[ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001
[ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700
[ 0.379982] Call trace:
[ 0.387091] clk_core_get_parent_by_index+0x68/0xec
[ 0.389351] __clk_register+0x1d8/0x820
[ 0.394210] devm_clk_hw_register+0x5c/0xe0
[ 0.398030] devm_clk_register_regmap+0x44/0x8c
[ 0.402198] qcom_cc_really_probe+0x17c/0x1d0
[ 0.406711] qcom_cc_probe+0x34/0x44
[ 0.411224] gcc_ipq8074_probe+0x18/0x30
[ 0.414869] platform_probe+0x68/0xe0
[ 0.418776] really_probe.part.0+0x9c/0x30c
[ 0.422336] __driver_probe_device+0x98/0x144
[ 0.426329] driver_probe_device+0x44/0x11c
[ 0.430842] __device_attach_driver+0xb4/0x120
[ 0.434836] bus_for_each_drv+0x68/0xb0
[ 0.439349] __device_attach+0xb0/0x170
[ 0.443081] device_initial_probe+0x14/0x20
[ 0.446901] bus_probe_device+0x9c/0xa4
[ 0.451067] device_add+0x35c/0x834
[ 0.454886] of_device_add+0x54/0x64
[ 0.458360] of_platform_device_create_pdata+0xc0/0x100
[ 0.462181] of_platform_bus_create+0x114/0x370
[ 0.467128] of_platform_bus_create+0x15c/0x370
[ 0.471641] of_platform_populate+0x50/0xcc
[ 0.476155] of_platform_default_populate_init+0xa8/0xc8
[ 0.480324] do_one_initcall+0x50/0x1b0
[ 0.485877] kernel_init_freeable+0x234/0x29c
[ 0.489436] kernel_init+0x24/0x120
[ 0.493948] ret_from_fork+0x10/0x20
[ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042)
[ 0.501079] ---[ end trace 4ca7e1129da2abce ]---
Fixes: f0cfcf1a ("clk: qcom: ipq8074: Add missing clocks for pcie")
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gcc-ipq8074.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index 108fe27bee10..b09d99343e09 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -60,11 +60,6 @@ static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = {
{ P_GPLL0_DIV2, 4 },
};
-static const char * const gcc_xo_gpll0[] = {
- "xo",
- "gpll0",
-};
-
static const struct parent_map gcc_xo_gpll0_map[] = {
{ P_XO, 0 },
{ P_GPLL0, 1 },
@@ -956,6 +951,11 @@ static struct clk_rcg2 blsp1_uart6_apps_clk_src = {
},
};
+static const struct clk_parent_data gcc_xo_gpll0[] = {
+ { .fw_name = "xo" },
+ { .hw = &gpll0.clkr.hw },
+};
+
static const struct freq_tbl ftbl_pcie_axi_clk_src[] = {
F(19200000, P_XO, 1, 0, 0),
F(200000000, P_GPLL0, 4, 0, 0),
@@ -969,7 +969,7 @@ static struct clk_rcg2 pcie0_axi_clk_src = {
.parent_map = gcc_xo_gpll0_map,
.clkr.hw.init = &(struct clk_init_data){
.name = "pcie0_axi_clk_src",
- .parent_names = gcc_xo_gpll0,
+ .parent_data = gcc_xo_gpll0,
.num_parents = 2,
.ops = &clk_rcg2_ops,
},
@@ -1016,7 +1016,7 @@ static struct clk_rcg2 pcie1_axi_clk_src = {
.parent_map = gcc_xo_gpll0_map,
.clkr.hw.init = &(struct clk_init_data){
.name = "pcie1_axi_clk_src",
- .parent_names = gcc_xo_gpll0,
+ .parent_data = gcc_xo_gpll0,
.num_parents = 2,
.ops = &clk_rcg2_ops,
},
@@ -1330,7 +1330,7 @@ static struct clk_rcg2 nss_ce_clk_src = {
.parent_map = gcc_xo_gpll0_map,
.clkr.hw.init = &(struct clk_init_data){
.name = "nss_ce_clk_src",
- .parent_names = gcc_xo_gpll0,
+ .parent_data = gcc_xo_gpll0,
.num_parents = 2,
.ops = &clk_rcg2_ops,
},
@@ -4329,8 +4329,7 @@ static struct clk_rcg2 pcie0_rchng_clk_src = {
.parent_map = gcc_xo_gpll0_map,
.clkr.hw.init = &(struct clk_init_data){
.name = "pcie0_rchng_clk_src",
- .parent_hws = (const struct clk_hw *[]) {
- &gpll0.clkr.hw },
+ .parent_data = gcc_xo_gpll0,
.num_parents = 2,
.ops = &clk_rcg2_ops,
},
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 7823e5aa5d1dd9ed5849923c165eb8f29ad23c54 ]
Member assignments to qcom_scm_desc were moved into struct initializers
in 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers") including
the case in qcom_scm_iommu_secure_ptbl_init, except that the - now
duplicate - assignment to desc was left in place. While not harmful,
remove this unnecessary extra reassignment.
Fixes: 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/qcom_scm.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 27a64de91981..2b5214d5c0da 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -749,12 +749,6 @@ int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
};
int ret;
- desc.args[0] = addr;
- desc.args[1] = size;
- desc.args[2] = spare;
- desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
- QCOM_SCM_VAL);
-
ret = qcom_scm_call(__scm->dev, &desc, NULL);
/* the pg table has been initialized already, ignore the error */
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 44ab30b056149bd59dd7989a593dd25ead6007fd ]
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
[Steve: fix Fixes: line]
Reviewed-by: Steven Price <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panfrost/panfrost_gpu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index bbe628b306ee..f8355de6e335 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -360,8 +360,11 @@ int panfrost_gpu_init(struct panfrost_device *pfdev)
panfrost_gpu_init_features(pfdev);
- dma_set_mask_and_coherent(pfdev->dev,
+ err = dma_set_mask_and_coherent(pfdev->dev,
DMA_BIT_MASK(FIELD_GET(0xff00, pfdev->features.mmu_features)));
+ if (err)
+ return err;
+
dma_set_max_seg_size(pfdev->dev, UINT_MAX);
irq = platform_get_irq_byname(to_platform_device(pfdev->dev), "gpu");
--
2.34.1
From: Hangbin Liu <[email protected]>
[ Upstream commit e077ed58c243afc197bc2a2ba0e1ff61135e4ec2 ]
bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled.
But if user start kernel with ipv6.disable=1, the bareudp sock will
created failed, which cause the interface open failed even with ethertype
ip. e.g.
# ip link add bareudp1 type bareudp dstport 2 ethertype ip
# ip link set bareudp1 up
RTNETLINK answers: Address family not supported by protocol
Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is
no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will
return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h.
Reported-by: Jianlin Shi <[email protected]>
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bareudp.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/bareudp.c b/drivers/net/bareudp.c
index 54e321a695ce..98c915943f32 100644
--- a/drivers/net/bareudp.c
+++ b/drivers/net/bareudp.c
@@ -141,14 +141,14 @@ static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
skb_reset_network_header(skb);
skb_reset_mac_header(skb);
- if (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
+ if (!ipv6_mod_enabled() || family == AF_INET)
err = IP_ECN_decapsulate(oiph, skb);
else
err = IP6_ECN_decapsulate(oiph, skb);
if (unlikely(err)) {
if (log_ecn_error) {
- if (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
+ if (!ipv6_mod_enabled() || family == AF_INET)
net_info_ratelimited("non-ECT from %pI4 "
"with TOS=%#x\n",
&((struct iphdr *)oiph)->saddr,
@@ -214,11 +214,12 @@ static struct socket *bareudp_create_sock(struct net *net, __be16 port)
int err;
memset(&udp_conf, 0, sizeof(udp_conf));
-#if IS_ENABLED(CONFIG_IPV6)
- udp_conf.family = AF_INET6;
-#else
- udp_conf.family = AF_INET;
-#endif
+
+ if (ipv6_mod_enabled())
+ udp_conf.family = AF_INET6;
+ else
+ udp_conf.family = AF_INET;
+
udp_conf.local_udp_port = port;
/* Open UDP socket */
err = udp_sock_create(net, &udp_conf, &sock);
@@ -441,7 +442,7 @@ static netdev_tx_t bareudp_xmit(struct sk_buff *skb, struct net_device *dev)
}
rcu_read_lock();
- if (IS_ENABLED(CONFIG_IPV6) && info->mode & IP_TUNNEL_INFO_IPV6)
+ if (ipv6_mod_enabled() && info->mode & IP_TUNNEL_INFO_IPV6)
err = bareudp6_xmit_skb(skb, dev, bareudp, info);
else
err = bareudp_xmit_skb(skb, dev, bareudp, info);
@@ -471,7 +472,7 @@ static int bareudp_fill_metadata_dst(struct net_device *dev,
use_cache = ip_tunnel_dst_cache_usable(skb, info);
- if (!IS_ENABLED(CONFIG_IPV6) || ip_tunnel_info_af(info) == AF_INET) {
+ if (!ipv6_mod_enabled() || ip_tunnel_info_af(info) == AF_INET) {
struct rtable *rt;
__be32 saddr;
--
2.34.1
From: Anssi Hannula <[email protected]>
[ Upstream commit 1d7286729aa616772be334eb908e11f527e1e291 ]
For a couple of times I have encountered a situation where
hv_balloon: Unhandled message: type: 12447
is being flooded over 1 million times per second with various values,
filling the log and consuming cycles, making debugging difficult.
Add rate limiting to the message.
Most other Hyper-V drivers already have similar rate limiting in their
message callbacks.
The cause of the floods in my case was probably fixed by 96d9d1fa5cd5
("Drivers: hv: balloon: account for vmbus packet header in
max_pkt_size").
Fixes: 9aa8b50b2b3d ("Drivers: hv: Add Hyper-V balloon driver")
Signed-off-by: Anssi Hannula <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hv/hv_balloon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
index f2d05bff4245..439f99b8b5de 100644
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -1563,7 +1563,7 @@ static void balloon_onchannelcallback(void *context)
break;
default:
- pr_warn("Unhandled message: type: %d\n", dm_hdr->type);
+ pr_warn_ratelimited("Unhandled message: type: %d\n", dm_hdr->type);
}
}
--
2.34.1
From: Tom Rix <[email protected]>
commit 915593a7a663b2ad08b895a5f3ba8b19d89d4ebf upstream.
Clang static analysis reports this issue
interface.c:810:8: warning: Passed-by-value struct
argument contains uninitialized data
now = rtc_tm_to_ktime(tm);
^~~~~~~~~~~~~~~~~~~
tm is set by a successful call to __rtc_read_time()
but its return status is not checked. Check if
it was successful before setting the enabled flag.
Move the decl of err to function scope.
Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/interface.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -793,9 +793,13 @@ static int rtc_timer_enqueue(struct rtc_
struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue);
struct rtc_time tm;
ktime_t now;
+ int err;
+
+ err = __rtc_read_time(rtc, &tm);
+ if (err)
+ return err;
timer->enabled = 1;
- __rtc_read_time(rtc, &tm);
now = rtc_tm_to_ktime(tm);
/* Skip over expired timers */
@@ -809,7 +813,6 @@ static int rtc_timer_enqueue(struct rtc_
trace_rtc_timer_enqueue(timer);
if (!next || ktime_before(timer->node.expires, next->expires)) {
struct rtc_wkalrm alarm;
- int err;
alarm.time = rtc_ktime_to_tm(timer->node.expires);
alarm.enabled = 1;
From: Dan Carpenter <[email protected]>
[ Upstream commit 67e4550ecd6164bfbdff54c169e5bbf9ccfaf14d ]
Call i2c_unregister_device(audio) on this error path.
Fixes: d3b2ccd9e307 ("[media] s2250: convert to the control framework")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/go7007/s2250-board.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/go7007/s2250-board.c b/drivers/media/usb/go7007/s2250-board.c
index c742cc88fac5..1fa6f10ee157 100644
--- a/drivers/media/usb/go7007/s2250-board.c
+++ b/drivers/media/usb/go7007/s2250-board.c
@@ -504,6 +504,7 @@ static int s2250_probe(struct i2c_client *client,
u8 *data;
struct go7007 *go = i2c_get_adapdata(adapter);
struct go7007_usb *usb = go->hpi_context;
+ int err = -EIO;
audio = i2c_new_dummy_device(adapter, TLV320_ADDRESS >> 1);
if (IS_ERR(audio))
@@ -532,11 +533,8 @@ static int s2250_probe(struct i2c_client *client,
V4L2_CID_HUE, -512, 511, 1, 0);
sd->ctrl_handler = &state->hdl;
if (state->hdl.error) {
- int err = state->hdl.error;
-
- v4l2_ctrl_handler_free(&state->hdl);
- kfree(state);
- return err;
+ err = state->hdl.error;
+ goto fail;
}
state->std = V4L2_STD_NTSC;
@@ -600,7 +598,7 @@ static int s2250_probe(struct i2c_client *client,
i2c_unregister_device(audio);
v4l2_ctrl_handler_free(&state->hdl);
kfree(state);
- return -EIO;
+ return err;
}
static int s2250_remove(struct i2c_client *client)
--
2.34.1
From: Linus Torvalds <[email protected]>
[ Upstream commit d888c83fcec75194a8a48ccd283953bdba7b2550 ]
Jason Donenfeld reports that my commit 1c24a186398f ("fs: fd tables have
to be multiples of BITS_PER_LONG") doesn't work, and the reason is an
embarrassing brown-paper-bag bug.
Yes, we want to align the number of fds to BITS_PER_LONG, and yes, the
reason they might not be aligned is because the incoming 'max_fd'
argument might not be aligned.
But aligining the argument - while simple - will cause a "infinitely
big" maxfd (eg NR_OPEN_MAX) to just overflow to zero. Which most
definitely isn't what we want either.
The obvious fix was always just to do the alignment last, but I had
moved it earlier just to make the patch smaller and the code look
simpler. Duh. It certainly made _me_ look simple.
Fixes: 1c24a186398f ("fs: fd tables have to be multiples of BITS_PER_LONG")
Reported-and-tested-by: Jason A. Donenfeld <[email protected]>
Cc: Fedor Pchelkin <[email protected]>
Cc: Alexey Khoroshilov <[email protected]>
Cc: Christian Brauner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/file.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/file.c b/fs/file.c
index c01c29417ae6..ee9317346702 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -303,10 +303,9 @@ static unsigned int sane_fdtable_size(struct fdtable *fdt, unsigned int max_fds)
unsigned int count;
count = count_open_files(fdt);
- max_fds = ALIGN(max_fds, BITS_PER_LONG);
if (max_fds < NR_OPEN_DEFAULT)
max_fds = NR_OPEN_DEFAULT;
- return min(count, max_fds);
+ return ALIGN(min(count, max_fds), BITS_PER_LONG);
}
/*
--
2.34.1
From: Sean Christopherson <[email protected]>
commit 04dc4e6ce274fa729feda32aa957b27388a3870c upstream.
Move the check for an invalid root out of kvm_tdp_mmu_get_root() and into
the one place it actually matters, tdp_mmu_next_root(), as the other user
already has an implicit validity check. A future bug fix will need to
get references to invalid roots to honor mmu_notifier requests; there's
no point in forcing what will be a common path to open code getting a
reference to a root.
No functional change intended.
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/tdp_mmu.c | 12 ++++++++++--
arch/x86/kvm/mmu/tdp_mmu.h | 3 ---
2 files changed, 10 insertions(+), 5 deletions(-)
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -121,9 +121,14 @@ static struct kvm_mmu_page *tdp_mmu_next
next_root = list_first_or_null_rcu(&kvm->arch.tdp_mmu_roots,
typeof(*next_root), link);
- while (next_root && !kvm_tdp_mmu_get_root(kvm, next_root))
+ while (next_root) {
+ if (!next_root->role.invalid &&
+ kvm_tdp_mmu_get_root(kvm, next_root))
+ break;
+
next_root = list_next_or_null_rcu(&kvm->arch.tdp_mmu_roots,
&next_root->link, typeof(*next_root), link);
+ }
rcu_read_unlock();
@@ -199,7 +204,10 @@ hpa_t kvm_tdp_mmu_get_vcpu_root_hpa(stru
role = page_role_for_level(vcpu, vcpu->arch.mmu->shadow_root_level);
- /* Check for an existing root before allocating a new one. */
+ /*
+ * Check for an existing root before allocating a new one. Note, the
+ * role check prevents consuming an invalid root.
+ */
for_each_tdp_mmu_root(kvm, root, kvm_mmu_role_as_id(role)) {
if (root->role.word == role.word &&
kvm_tdp_mmu_get_root(kvm, root))
--- a/arch/x86/kvm/mmu/tdp_mmu.h
+++ b/arch/x86/kvm/mmu/tdp_mmu.h
@@ -10,9 +10,6 @@ hpa_t kvm_tdp_mmu_get_vcpu_root_hpa(stru
__must_check static inline bool kvm_tdp_mmu_get_root(struct kvm *kvm,
struct kvm_mmu_page *root)
{
- if (root->role.invalid)
- return false;
-
return refcount_inc_not_zero(&root->tdp_mmu_root_count);
}
From: Quinn Tran <[email protected]>
commit 58ca5999e0367d131de82a75257fbfd5aed0195d upstream.
User experienced no task management error while target device is responding
with error. The RSP_CODE field in the status IOCB is in little endian.
Driver assumes it's big endian and it picked up erroneous data.
Convert the data back to big endian as is on the wire.
Link: https://lore.kernel.org/r/[email protected]
Fixes: faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_isr.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2494,6 +2494,7 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *v
iocb->u.tmf.data = QLA_FUNCTION_FAILED;
} else if ((le16_to_cpu(sts->scsi_status) &
SS_RESPONSE_INFO_LEN_VALID)) {
+ host_to_fcp_swap(sts->data, sizeof(sts->data));
if (le32_to_cpu(sts->rsp_data_len) < 4) {
ql_log(ql_log_warn, fcport->vha, 0x503b,
"Async-%s error - hdl=%x not enough response(%d).\n",
From: Randy Dunlap <[email protected]>
commit 05fe3c103f7e6b8b4fca8a7001dfc9ed4628085b upstream.
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment). This prevents:
Unknown kernel command line parameters \
"BOOT_IMAGE=/boot/bzImage-517rc5 hardened_usercopy=off", will be \
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
hardened_usercopy=off
or
hardened_usercopy=on
but when "hardened_usercopy=foo" is used, there is no Unknown kernel
command line parameter.
Return 1 to indicate that the boot option has been handled.
Print a warning if strtobool() returns an error on the option string,
but do not mark this as in unknown command line option and do not cause
init's environment to be polluted with this string.
Link: https://lkml.kernel.org/r/[email protected]
Link: lore.kernel.org/r/[email protected]
Fixes: b5cb15d9372ab ("usercopy: Allow boot cmdline disabling of hardening")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Acked-by: Chris von Recklinghausen <[email protected]>
Cc: Kees Cook <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/usercopy.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/mm/usercopy.c
+++ b/mm/usercopy.c
@@ -294,7 +294,10 @@ static bool enable_checks __initdata = t
static int __init parse_hardened_usercopy(char *str)
{
- return strtobool(str, &enable_checks);
+ if (strtobool(str, &enable_checks))
+ pr_warn("Invalid option string for hardened_usercopy: '%s'\n",
+ str);
+ return 1;
}
__setup("hardened_usercopy=", parse_hardened_usercopy);
From: Sukadev Bhattiprolu <[email protected]>
[ Upstream commit 4219196d1f662cb10a462eb9e076633a3fc31a15 ]
There is a race between reset and the transmit paths that can lead to
ibmvnic_xmit() accessing an scrq after it has been freed in the reset
path. It can result in a crash like:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000016189f8
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic]
LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
Call Trace:
[c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable)
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c9cfcc] sch_direct_xmit+0xec/0x330
[c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0
[c000000000c00ad4] __dev_queue_xmit+0x394/0x730
[c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding]
[c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding]
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c00ca4] __dev_queue_xmit+0x564/0x730
[c000000000cf97e0] neigh_hh_output+0xd0/0x180
[c000000000cfa69c] ip_finish_output2+0x31c/0x5c0
[c000000000cfd244] __ip_queue_xmit+0x194/0x4f0
[c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0
[c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0
[c000000000d2d984] tcp_retransmit_skb+0x34/0x130
[c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0
[c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330
[c000000000d317bc] tcp_write_timer+0x5c/0x200
[c000000000243270] call_timer_fn+0x50/0x1c0
[c000000000243704] __run_timers.part.0+0x324/0x460
[c000000000243894] run_timer_softirq+0x54/0xa0
[c000000000ea713c] __do_softirq+0x15c/0x3e0
[c000000000166258] __irq_exit_rcu+0x158/0x190
[c000000000166420] irq_exit+0x20/0x40
[c00000000002853c] timer_interrupt+0x14c/0x2b0
[c000000000009a00] decrementer_common_virt+0x210/0x220
--- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c
The immediate cause of the crash is the access of tx_scrq in the following
snippet during a reset, where the tx_scrq can be either NULL or an address
that will soon be invalid:
ibmvnic_xmit()
{
...
tx_scrq = adapter->tx_scrq[queue_num];
txq = netdev_get_tx_queue(netdev, queue_num);
ind_bufp = &tx_scrq->ind_buf;
if (test_bit(0, &adapter->resetting)) {
...
}
But beyond that, the call to ibmvnic_xmit() itself is not safe during a
reset and the reset path attempts to avoid this by stopping the queue in
ibmvnic_cleanup(). However just after the queue was stopped, an in-flight
ibmvnic_complete_tx() could have restarted the queue even as the reset is
progressing.
Since the queue was restarted we could get a call to ibmvnic_xmit() which
can then access the bad tx_scrq (or other fields).
We cannot however simply have ibmvnic_complete_tx() check the ->resetting
bit and skip starting the queue. This can race at the "back-end" of a good
reset which just restarted the queue but has not cleared the ->resetting
bit yet. If we skip restarting the queue due to ->resetting being true,
the queue would remain stopped indefinitely potentially leading to transmit
timeouts.
IOW ->resetting is too broad for this purpose. Instead use a new flag
that indicates whether or not the queues are active. Only the open/
reset paths control when the queues are active. ibmvnic_complete_tx()
and others wake up the queue only if the queue is marked active.
So we will have:
A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open()
->resetting = true
->tx_queues_active = false
disable tx queues
...
->tx_queues_active = true
start tx queues
B. Tx interrupt in ibmvnic_complete_tx():
if (->tx_queues_active)
netif_wake_subqueue();
To ensure that ->tx_queues_active and state of the queues are consistent,
we need a lock which:
- must also be taken in the interrupt path (ibmvnic_complete_tx())
- shared across the multiple queues in the adapter (so they don't
become serialized)
Use rcu_read_lock() and have the reset thread synchronize_rcu() after
updating the ->tx_queues_active state.
While here, consolidate a few boolean fields in ibmvnic_adapter for
better alignment.
Based on discussions with Brian King and Dany Madden.
Fixes: 7ed5b31f4a66 ("net/ibmvnic: prevent more than one thread from running in reset")
Reported-by: Vaishnavi Bhat <[email protected]>
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 63 ++++++++++++++++++++++++------
drivers/net/ethernet/ibm/ibmvnic.h | 7 +++-
2 files changed, 55 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 404921418f42..c809e8fe648f 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1250,6 +1250,15 @@ static int __ibmvnic_open(struct net_device *netdev)
return rc;
}
+ adapter->tx_queues_active = true;
+
+ /* Since queues were stopped until now, there shouldn't be any
+ * one in ibmvnic_complete_tx() or ibmvnic_xmit() so maybe we
+ * don't need the synchronize_rcu()? Leaving it for consistency
+ * with setting ->tx_queues_active = false.
+ */
+ synchronize_rcu();
+
netif_tx_start_all_queues(netdev);
if (prev_state == VNIC_CLOSED) {
@@ -1422,6 +1431,14 @@ static void ibmvnic_cleanup(struct net_device *netdev)
struct ibmvnic_adapter *adapter = netdev_priv(netdev);
/* ensure that transmissions are stopped if called by do_reset */
+
+ adapter->tx_queues_active = false;
+
+ /* Ensure complete_tx() and ibmvnic_xmit() see ->tx_queues_active
+ * update so they don't restart a queue after we stop it below.
+ */
+ synchronize_rcu();
+
if (test_bit(0, &adapter->resetting))
netif_tx_disable(netdev);
else
@@ -1662,14 +1679,21 @@ static void ibmvnic_tx_scrq_clean_buffer(struct ibmvnic_adapter *adapter,
tx_buff->skb = NULL;
adapter->netdev->stats.tx_dropped++;
}
+
ind_bufp->index = 0;
+
if (atomic_sub_return(entries, &tx_scrq->used) <=
(adapter->req_tx_entries_per_subcrq / 2) &&
- __netif_subqueue_stopped(adapter->netdev, queue_num) &&
- !test_bit(0, &adapter->resetting)) {
- netif_wake_subqueue(adapter->netdev, queue_num);
- netdev_dbg(adapter->netdev, "Started queue %d\n",
- queue_num);
+ __netif_subqueue_stopped(adapter->netdev, queue_num)) {
+ rcu_read_lock();
+
+ if (adapter->tx_queues_active) {
+ netif_wake_subqueue(adapter->netdev, queue_num);
+ netdev_dbg(adapter->netdev, "Started queue %d\n",
+ queue_num);
+ }
+
+ rcu_read_unlock();
}
}
@@ -1724,11 +1748,12 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
int index = 0;
u8 proto = 0;
- tx_scrq = adapter->tx_scrq[queue_num];
- txq = netdev_get_tx_queue(netdev, queue_num);
- ind_bufp = &tx_scrq->ind_buf;
-
- if (test_bit(0, &adapter->resetting)) {
+ /* If a reset is in progress, drop the packet since
+ * the scrqs may get torn down. Otherwise use the
+ * rcu to ensure reset waits for us to complete.
+ */
+ rcu_read_lock();
+ if (!adapter->tx_queues_active) {
dev_kfree_skb_any(skb);
tx_send_failed++;
@@ -1737,6 +1762,10 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
goto out;
}
+ tx_scrq = adapter->tx_scrq[queue_num];
+ txq = netdev_get_tx_queue(netdev, queue_num);
+ ind_bufp = &tx_scrq->ind_buf;
+
if (ibmvnic_xmit_workarounds(skb, netdev)) {
tx_dropped++;
tx_send_failed++;
@@ -1744,6 +1773,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
ibmvnic_tx_scrq_flush(adapter, tx_scrq);
goto out;
}
+
if (skb_is_gso(skb))
tx_pool = &adapter->tso_pool[queue_num];
else
@@ -1898,6 +1928,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
netif_carrier_off(netdev);
}
out:
+ rcu_read_unlock();
netdev->stats.tx_dropped += tx_dropped;
netdev->stats.tx_bytes += tx_bytes;
netdev->stats.tx_packets += tx_packets;
@@ -3482,9 +3513,15 @@ static int ibmvnic_complete_tx(struct ibmvnic_adapter *adapter,
(adapter->req_tx_entries_per_subcrq / 2) &&
__netif_subqueue_stopped(adapter->netdev,
scrq->pool_index)) {
- netif_wake_subqueue(adapter->netdev, scrq->pool_index);
- netdev_dbg(adapter->netdev, "Started queue %d\n",
- scrq->pool_index);
+ rcu_read_lock();
+ if (adapter->tx_queues_active) {
+ netif_wake_subqueue(adapter->netdev,
+ scrq->pool_index);
+ netdev_dbg(adapter->netdev,
+ "Started queue %d\n",
+ scrq->pool_index);
+ }
+ rcu_read_unlock();
}
}
diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h
index 22df602323bc..ef395fd3b1e6 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.h
+++ b/drivers/net/ethernet/ibm/ibmvnic.h
@@ -1002,11 +1002,14 @@ struct ibmvnic_adapter {
struct work_struct ibmvnic_reset;
struct delayed_work ibmvnic_delayed_reset;
unsigned long resetting;
- bool napi_enabled, from_passive_init;
- bool login_pending;
/* last device reset time */
unsigned long last_reset_time;
+ bool napi_enabled;
+ bool from_passive_init;
+ bool login_pending;
+ /* protected by rcu */
+ bool tx_queues_active;
bool failover_pending;
bool force_reset_recovery;
--
2.34.1
From: Eric W. Biederman <[email protected]>
commit 390031c942116d4733310f0684beb8db19885fe6 upstream.
Matthew Wilcox reported that there is a missing mmap_lock in
file_files_note that could possibly lead to a user after free.
Solve this by using the existing vma snapshot for consistency
and to avoid the need to take the mmap_lock anywhere in the
coredump code except for dump_vma_snapshot.
Update the dump_vma_snapshot to capture vm_pgoff and vm_file
that are neeeded by fill_files_note.
Add free_vma_snapshot to free the captured values of vm_file.
Reported-by: Matthew Wilcox <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Fixes: 2aa362c49c31 ("coredump: extend core dump note section to contain file names of mapped files")
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_elf.c | 24 ++++++++++++------------
fs/coredump.c | 22 +++++++++++++++++++++-
include/linux/coredump.h | 2 ++
3 files changed, 35 insertions(+), 13 deletions(-)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1618,17 +1618,16 @@ static void fill_siginfo_note(struct mem
* long file_ofs
* followed by COUNT filenames in ASCII: "FILE1" NUL "FILE2" NUL...
*/
-static int fill_files_note(struct memelfnote *note)
+static int fill_files_note(struct memelfnote *note, struct coredump_params *cprm)
{
- struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma;
unsigned count, size, names_ofs, remaining, n;
user_long_t *data;
user_long_t *start_end_ofs;
char *name_base, *name_curpos;
+ int i;
/* *Estimated* file count and total data size needed */
- count = mm->map_count;
+ count = cprm->vma_count;
if (count > UINT_MAX / 64)
return -EINVAL;
size = count * 64;
@@ -1650,11 +1649,12 @@ static int fill_files_note(struct memelf
name_base = name_curpos = ((char *)data) + names_ofs;
remaining = size - names_ofs;
count = 0;
- for (vma = mm->mmap; vma != NULL; vma = vma->vm_next) {
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *m = &cprm->vma_meta[i];
struct file *file;
const char *filename;
- file = vma->vm_file;
+ file = m->file;
if (!file)
continue;
filename = file_path(file, name_curpos, remaining);
@@ -1674,9 +1674,9 @@ static int fill_files_note(struct memelf
memmove(name_curpos, filename, n);
name_curpos += n;
- *start_end_ofs++ = vma->vm_start;
- *start_end_ofs++ = vma->vm_end;
- *start_end_ofs++ = vma->vm_pgoff;
+ *start_end_ofs++ = m->start;
+ *start_end_ofs++ = m->end;
+ *start_end_ofs++ = m->pgoff;
count++;
}
@@ -1687,7 +1687,7 @@ static int fill_files_note(struct memelf
* Count usually is less than mm->map_count,
* we need to move filenames down.
*/
- n = mm->map_count - count;
+ n = cprm->vma_count - count;
if (n != 0) {
unsigned shift_bytes = n * 3 * sizeof(data[0]);
memmove(name_base - shift_bytes, name_base,
@@ -1886,7 +1886,7 @@ static int fill_note_info(struct elfhdr
fill_auxv_note(&info->auxv, current->mm);
info->size += notesize(&info->auxv);
- if (fill_files_note(&info->files) == 0)
+ if (fill_files_note(&info->files, cprm) == 0)
info->size += notesize(&info->files);
return 1;
@@ -2075,7 +2075,7 @@ static int fill_note_info(struct elfhdr
fill_auxv_note(info->notes + 3, current->mm);
info->numnote = 4;
- if (fill_files_note(info->notes + info->numnote) == 0) {
+ if (fill_files_note(info->notes + info->numnote, cprm) == 0) {
info->notes_files = info->notes + info->numnote;
info->numnote++;
}
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -54,6 +54,7 @@
#include <trace/events/sched.h>
static bool dump_vma_snapshot(struct coredump_params *cprm);
+static void free_vma_snapshot(struct coredump_params *cprm);
int core_uses_pid;
unsigned int core_pipe_limit;
@@ -834,7 +835,7 @@ void do_coredump(const kernel_siginfo_t
dump_emit(&cprm, "", 1);
}
file_end_write(cprm.file);
- kvfree(cprm.vma_meta);
+ free_vma_snapshot(&cprm);
}
if (ispipe && core_pipe_limit)
wait_for_dump_helpers(cprm.file);
@@ -1111,6 +1112,20 @@ static struct vm_area_struct *next_vma(s
return gate_vma;
}
+static void free_vma_snapshot(struct coredump_params *cprm)
+{
+ if (cprm->vma_meta) {
+ int i;
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct file *file = cprm->vma_meta[i].file;
+ if (file)
+ fput(file);
+ }
+ kvfree(cprm->vma_meta);
+ cprm->vma_meta = NULL;
+ }
+}
+
/*
* Under the mmap_lock, take a snapshot of relevant information about the task's
* VMAs.
@@ -1147,6 +1162,11 @@ static bool dump_vma_snapshot(struct cor
m->end = vma->vm_end;
m->flags = vma->vm_flags;
m->dump_size = vma_dump_size(vma, cprm->mm_flags);
+ m->pgoff = vma->vm_pgoff;
+
+ m->file = vma->vm_file;
+ if (m->file)
+ get_file(m->file);
}
mmap_write_unlock(mm);
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -12,6 +12,8 @@ struct core_vma_metadata {
unsigned long start, end;
unsigned long flags;
unsigned long dump_size;
+ unsigned long pgoff;
+ struct file *file;
};
extern int core_uses_pid;
From: Quinn Tran <[email protected]>
commit d2646eed7b19a206912f49101178cbbaa507256c upstream.
While a session is in the middle of a relogin, a late RSCN can be delivered
from switch. RSCN trigger fabric scan where the scan logic can trigger
another session login while a login is in progress. Reduce the extra
trigger to prevent multiple logins to the same session.
Link: https://lore.kernel.org/r/[email protected]
Fixes: bee8b84686c4 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1645,7 +1645,8 @@ int qla24xx_fcport_handle_login(struct s
fcport->login_gen, fcport->loop_id, fcport->scan_state,
fcport->fc4_type);
- if (fcport->scan_state != QLA_FCPORT_FOUND)
+ if (fcport->scan_state != QLA_FCPORT_FOUND ||
+ fcport->disc_state == DSC_DELETE_PEND)
return 0;
if ((fcport->loop_id != FC_NO_LOOP_ID) &&
@@ -1666,7 +1667,7 @@ int qla24xx_fcport_handle_login(struct s
if (vha->host->active_mode == MODE_TARGET && !N2N_TOPO(vha->hw))
return 0;
- if (fcport->flags & FCF_ASYNC_SENT) {
+ if (fcport->flags & (FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE)) {
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
return 0;
}
From: José Expósito <[email protected]>
[ Upstream commit ba3a5ddcf1e5df31f2291006d5297ca62035584f ]
Avoid leaking the "out" variable if it is not possible to allocate
the "txmsg" variable.
Fixes: 09234b88ef55 ("drm/selftests/test-drm_dp_mst_helper: Move 'sideband_msg_req_encode_decode' onto the heap")
Addresses-Coverity-ID: 1475685 ("Resource leak")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c b/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
index 6b4759ed6bfd..c491429f1a02 100644
--- a/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
+++ b/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
@@ -131,8 +131,10 @@ sideband_msg_req_encode_decode(struct drm_dp_sideband_msg_req_body *in)
return false;
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
- if (!txmsg)
+ if (!txmsg) {
+ kfree(out);
return false;
+ }
drm_dp_encode_sideband_req(in, txmsg);
ret = drm_dp_decode_sideband_req(txmsg, out);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 9ebd62d60edcd4d9c75485e5ccd0b79581ad3c49 ]
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call , as already done in the remove function.
Fixes: de66b3455023 ("ASoC: codecs: msm8916-wcd-analog: add MBHC support")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/msm8916-wcd-analog.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index 3ddd822240e3..971b8360b5b1 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -1221,8 +1221,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
}
irq = platform_get_irq_byname(pdev, "mbhc_switch_int");
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_clk;
+ }
ret = devm_request_threaded_irq(dev, irq, NULL,
pm8916_mbhc_switch_irq_handler,
@@ -1234,8 +1236,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
if (priv->mbhc_btn_enabled) {
irq = platform_get_irq_byname(pdev, "mbhc_but_press_det");
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_clk;
+ }
ret = devm_request_threaded_irq(dev, irq, NULL,
mbhc_btn_press_irq_handler,
@@ -1246,8 +1250,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
dev_err(dev, "cannot request mbhc button press irq\n");
irq = platform_get_irq_byname(pdev, "mbhc_but_rel_det");
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_clk;
+ }
ret = devm_request_threaded_irq(dev, irq, NULL,
mbhc_btn_release_irq_handler,
@@ -1264,6 +1270,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
return devm_snd_soc_register_component(dev, &pm8916_wcd_analog,
pm8916_wcd_analog_dai,
ARRAY_SIZE(pm8916_wcd_analog_dai));
+
+err_disable_clk:
+ clk_disable_unprepare(priv->mclk);
+ return ret;
}
static int pm8916_wcd_analog_spmi_remove(struct platform_device *pdev)
--
2.34.1
From: Yake Yang <[email protected]>
[ Upstream commit b062a0b9c1dc1ff63094337dccfe1568d5b62023 ]
Fix the following kernel oops in btmtksdio_interrrupt
[ 14.339134] btmtksdio_interrupt+0x28/0x54
[ 14.339139] process_sdio_pending_irqs+0x68/0x1a0
[ 14.339144] sdio_irq_work+0x40/0x70
[ 14.339154] process_one_work+0x184/0x39c
[ 14.339160] worker_thread+0x228/0x3e8
[ 14.339168] kthread+0x148/0x3ac
[ 14.339176] ret_from_fork+0x10/0x30
That happened because hdev->power_on is already called before
sdio_set_drvdata which btmtksdio_interrupt handler relies on is not
properly set up.
The details are shown as the below: hci_register_dev would run
queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI
workqueue_struct to complete the power-on sequeunce and thus hci_power_on
may run before sdio_set_drvdata is done in btmtksdio_probe.
The hci_dev_do_open in hci_power_on would initialize the device and enable
the interrupt and thus it is possible that btmtksdio_interrupt is being
called right before sdio_set_drvdata is filled out.
When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled
, the kernel oops is going to happen because btmtksdio_interrupt access an
uninitialized pointer.
Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
Reviewed-by: Mark Chen <[email protected]>
Co-developed-by: Sean Wang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Yake Yang <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btmtksdio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 1cbdeca1fdc4..ff1f5dfbb6db 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -981,6 +981,8 @@ static int btmtksdio_probe(struct sdio_func *func,
hdev->manufacturer = 70;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+ sdio_set_drvdata(func, bdev);
+
err = hci_register_dev(hdev);
if (err < 0) {
dev_err(&func->dev, "Can't register HCI device\n");
@@ -988,8 +990,6 @@ static int btmtksdio_probe(struct sdio_func *func,
return err;
}
- sdio_set_drvdata(func, bdev);
-
/* pm_runtime_enable would be done after the firmware is being
* downloaded because the core layer probably already enables
* runtime PM for this func such as the case host->caps &
--
2.34.1
From: Mirela Rabulea <[email protected]>
[ Upstream commit e738f5dd67eb8098d75345908a5e73782d0569a5 ]
In ov5640_set_fmt, pending_fmt_change will always be false, because the
sensor format is saved before comparing it with the previous format:
fmt = &sensor->fmt;...
*fmt = *mbus_fmt;...
if (mbus_fmt->code != sensor->fmt.code)
sensor->pending_fmt_change = true;
This causes the sensor to capture with the previous pixelcode.
Also, changes might happen even for V4L2_SUBDEV_FORMAT_TRY, so fix that.
Basically, revert back to the state before
commit 071154499193 ("media: ov5640: Fix set format regression")
as it was more clear, and then update format even when pixelcode does
not change, as resolution might change.
Fixes: 071154499193 ("media: ov5640: Fix set format regression")
Fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame interval is unchanged")
Fixes: fb98e29ff1ea5 ("media: ov5640: fix mode change regression")
Signed-off-by: Mirela Rabulea <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Acked-by: Hugues Fruchet <[email protected]>
Tested-by: Hugues Fruchet <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov5640.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index ddbd71394db3..db5a19babe67 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2293,7 +2293,6 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
struct ov5640_dev *sensor = to_ov5640_dev(sd);
const struct ov5640_mode_info *new_mode;
struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
- struct v4l2_mbus_framefmt *fmt;
int ret;
if (format->pad != 0)
@@ -2311,12 +2310,10 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
if (ret)
goto out;
- if (format->which == V4L2_SUBDEV_FORMAT_TRY)
- fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
- else
- fmt = &sensor->fmt;
-
- *fmt = *mbus_fmt;
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ *v4l2_subdev_get_try_format(sd, sd_state, 0) = *mbus_fmt;
+ goto out;
+ }
if (new_mode != sensor->current_mode) {
sensor->current_mode = new_mode;
@@ -2325,6 +2322,9 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
if (mbus_fmt->code != sensor->fmt.code)
sensor->pending_fmt_change = true;
+ /* update format even if code is unchanged, resolution might change */
+ sensor->fmt = *mbus_fmt;
+
__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
ov5640_calc_pixel_rate(sensor));
out:
--
2.34.1
From: Sean Christopherson <[email protected]>
commit 3354ef5a592d219364cf442c2f784ce7ad7629fd upstream.
Explicitly check for present SPTEs when clearing dirty bits in the TDP
MMU. This isn't strictly required for correctness, as setting the dirty
bit in a defunct SPTE will not change the SPTE from !PRESENT to PRESENT.
However, the guarded MMU_WARN_ON() in spte_ad_need_write_protect() would
complain if anyone actually turned on KVM's MMU debugging.
Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Cc: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/tdp_mmu.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -1316,6 +1316,9 @@ retry:
if (tdp_mmu_iter_cond_resched(kvm, &iter, false, true))
continue;
+ if (!is_shadow_present_pte(iter.old_spte))
+ continue;
+
if (spte_ad_need_write_protect(iter.old_spte)) {
if (is_writable_pte(iter.old_spte))
new_spte = iter.old_spte & ~PT_WRITABLE_MASK;
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit f2dd495a8d589371289981d5ed33e6873df94ecc ]
Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.
Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.
Based on patch from Sven Auhagen.
Fixes: c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
Tested-by: Sven Auhagen <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conntrack_proto_tcp.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index af5115e127cf..3cee5d8ee702 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -341,8 +341,8 @@ static void tcp_options(const struct sk_buff *skb,
if (!ptr)
return;
- state->td_scale =
- state->flags = 0;
+ state->td_scale = 0;
+ state->flags &= IP_CT_TCP_FLAG_BE_LIBERAL;
while (length > 0) {
int opcode=*ptr++;
@@ -839,6 +839,16 @@ static bool tcp_can_early_drop(const struct nf_conn *ct)
return false;
}
+static void nf_ct_tcp_state_reset(struct ip_ct_tcp_state *state)
+{
+ state->td_end = 0;
+ state->td_maxend = 0;
+ state->td_maxwin = 0;
+ state->td_maxack = 0;
+ state->td_scale = 0;
+ state->flags &= IP_CT_TCP_FLAG_BE_LIBERAL;
+}
+
/* Returns verdict for packet, or -1 for invalid. */
int nf_conntrack_tcp_packet(struct nf_conn *ct,
struct sk_buff *skb,
@@ -945,8 +955,7 @@ int nf_conntrack_tcp_packet(struct nf_conn *ct,
ct->proto.tcp.last_flags &= ~IP_CT_EXP_CHALLENGE_ACK;
ct->proto.tcp.seen[ct->proto.tcp.last_dir].flags =
ct->proto.tcp.last_flags;
- memset(&ct->proto.tcp.seen[dir], 0,
- sizeof(struct ip_ct_tcp_state));
+ nf_ct_tcp_state_reset(&ct->proto.tcp.seen[dir]);
break;
}
ct->proto.tcp.last_index = index;
--
2.34.1
From: Kees Cook <[email protected]>
commit d4da1f27396fb1dde079447a3612f4f512caed07 upstream.
The pcon_dsc_dpcd array holds 13 registers (0x92 through 0x9E). Fix the
math to calculate the max size. Found from a -Warray-bounds build:
drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_pcon_dsc_bpp_incr':
drivers/gpu/drm/drm_dp_helper.c:3130:28: error: array subscript 12 is outside array bounds of 'const u8[12]' {aka 'const unsigned char[12]'} [-Werror=array-bounds]
3130 | buf = pcon_dsc_dpcd[DP_PCON_DSC_BPP_INCR - DP_PCON_DSC_ENCODER];
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/drm_dp_helper.c:3126:39: note: while referencing 'pcon_dsc_dpcd'
3126 | int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE])
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Daniel Vetter <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: [email protected]
Fixes: e2e16da398d9 ("drm/dp_helper: Add support for Configuring DSC for HDMI2.1 Pcon")
Cc: [email protected]
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/lkml/20211214001849.GA62559@embeddedor/
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/drm/drm_dp_helper.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -455,7 +455,7 @@ struct drm_panel;
# define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3)
/* DP-HDMI2.1 PCON DSC ENCODER SUPPORT */
-#define DP_PCON_DSC_ENCODER_CAP_SIZE 0xC /* 0x9E - 0x92 */
+#define DP_PCON_DSC_ENCODER_CAP_SIZE 0xD /* 0x92 through 0x9E */
#define DP_PCON_DSC_ENCODER 0x092
# define DP_PCON_DSC_ENCODER_SUPPORTED (1 << 0)
# define DP_PCON_DSC_PPS_ENC_OVERRIDE (1 << 1)
From: Mark Brown <[email protected]>
[ Upstream commit 69a6d06878f05d63673b0dcdc3c3ef1af2996d46 ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Michael Walle <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/devices/mchp48l640.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mtd/devices/mchp48l640.c b/drivers/mtd/devices/mchp48l640.c
index 99400d0fb8c1..fbd6b6bf908e 100644
--- a/drivers/mtd/devices/mchp48l640.c
+++ b/drivers/mtd/devices/mchp48l640.c
@@ -357,6 +357,15 @@ static const struct of_device_id mchp48l640_of_table[] = {
};
MODULE_DEVICE_TABLE(of, mchp48l640_of_table);
+static const struct spi_device_id mchp48l640_spi_ids[] = {
+ {
+ .name = "48l640",
+ .driver_data = (kernel_ulong_t)&mchp48l640_caps,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, mchp48l640_spi_ids);
+
static struct spi_driver mchp48l640_driver = {
.driver = {
.name = "mchp48l640",
@@ -364,6 +373,7 @@ static struct spi_driver mchp48l640_driver = {
},
.probe = mchp48l640_probe,
.remove = mchp48l640_remove,
+ .id_table = mchp48l640_spi_ids,
};
module_spi_driver(mchp48l640_driver);
--
2.34.1
From: Joel Stanley <[email protected]>
[ Upstream commit d46fddd52d11eb6a3a7ed836f9f273e9cf8cd01c ]
SCOM error handling is made complex by trying to pass around two bits of
information: the function return code, and a status parameter that
represents the CFAM error status register.
The commit f72ddbe1d7b7 ("fsi: scom: Remove retries") removed the
"hidden" retries in the SCOM driver, in preference of allowing the
calling code (userspace or driver) to decide how to handle a failed
SCOM. However it introduced a bug by attempting to be smart about the
return codes that were "errors" and which were ok to fall through to the
status register parsing.
We get the following errors:
- EINVAL or ENXIO, for indirect scoms where the value is invalid
- EINVAL, where the size or address is incorrect
- EIO or ETIMEOUT, where FSI write failed (aspeed master)
- EAGAIN, where the master detected a crc error (GPIO master only)
- EBUSY, where the bus is disabled (GPIO master in external mode)
In all of these cases we should fail the SCOM read/write and return the
error.
Thanks to Dan Carpenter for the detailed bug report.
Fixes: f72ddbe1d7b7 ("fsi: scom: Remove retries")
Link: https://lists.ozlabs.org/pipermail/linux-fsi/2021-November/000235.html
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Reviewed-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/fsi/fsi-scom.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
index da1486bb6a14..3b427f7e9027 100644
--- a/drivers/fsi/fsi-scom.c
+++ b/drivers/fsi/fsi-scom.c
@@ -289,7 +289,7 @@ static int put_scom(struct scom_device *scom, uint64_t value,
int rc;
rc = raw_put_scom(scom, value, addr, &status);
- if (rc == -ENODEV)
+ if (rc)
return rc;
rc = handle_fsi2pib_status(scom, status);
@@ -308,7 +308,7 @@ static int get_scom(struct scom_device *scom, uint64_t *value,
int rc;
rc = raw_get_scom(scom, value, addr, &status);
- if (rc == -ENODEV)
+ if (rc)
return rc;
rc = handle_fsi2pib_status(scom, status);
--
2.34.1
From: Frank Wunderlich <[email protected]>
[ Upstream commit 55927cb44db43a57699fa652e2437a91620385dc ]
After converting ahci-platform txt binding to yaml nodename is reported
as not matching the standard:
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml:
ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$'
Fix it to match binding.
Fixes: ac9aae00f0fc ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2")
Signed-off-by: Frank Wunderlich <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 2cfeaf3b0a87..8c218689fef7 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -687,7 +687,7 @@
};
};
- sata: ahci@663f2000 {
+ sata: sata@663f2000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x663f2000 0x1000>;
dma-coherent;
--
2.34.1
From: Mustafa Ismail <[email protected]>
[ Upstream commit b200189626b5cefbaf8be9cadd7a28215e065bb9 ]
Using PCI_FUNC macro in a VM, when the device is in passthrough mode does
not provide the real function instance. This means that currently, devices
will not probe unless the instance in the VM matches the instance in the
host.
Fix this by getting the pf_id from the LAN during the probe.
Fixes: 8498a30e1b94 ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mustafa Ismail <[email protected]>
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/irdma/hw.c | 2 +-
drivers/infiniband/hw/irdma/i40iw_if.c | 1 +
drivers/infiniband/hw/irdma/main.c | 1 +
drivers/infiniband/hw/irdma/main.h | 1 +
4 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c
index aa119441eb45..4f763e552eae 100644
--- a/drivers/infiniband/hw/irdma/hw.c
+++ b/drivers/infiniband/hw/irdma/hw.c
@@ -1608,7 +1608,7 @@ static enum irdma_status_code irdma_initialize_dev(struct irdma_pci_f *rf)
info.fpm_commit_buf = mem.va;
info.bar0 = rf->hw.hw_addr;
- info.hmc_fn_id = PCI_FUNC(rf->pcidev->devfn);
+ info.hmc_fn_id = rf->pf_id;
info.hw = &rf->hw;
status = irdma_sc_dev_init(rf->rdma_ver, &rf->sc_dev, &info);
if (status)
diff --git a/drivers/infiniband/hw/irdma/i40iw_if.c b/drivers/infiniband/hw/irdma/i40iw_if.c
index d219f64b2c3d..a6f758b61b0c 100644
--- a/drivers/infiniband/hw/irdma/i40iw_if.c
+++ b/drivers/infiniband/hw/irdma/i40iw_if.c
@@ -77,6 +77,7 @@ static void i40iw_fill_device_info(struct irdma_device *iwdev, struct i40e_info
rf->rdma_ver = IRDMA_GEN_1;
rf->gen_ops.request_reset = i40iw_request_reset;
rf->pcidev = cdev_info->pcidev;
+ rf->pf_id = cdev_info->fid;
rf->hw.hw_addr = cdev_info->hw_addr;
rf->cdev = cdev_info;
rf->msix_count = cdev_info->msix_count;
diff --git a/drivers/infiniband/hw/irdma/main.c b/drivers/infiniband/hw/irdma/main.c
index 51a41359e0b4..c556a36e7670 100644
--- a/drivers/infiniband/hw/irdma/main.c
+++ b/drivers/infiniband/hw/irdma/main.c
@@ -226,6 +226,7 @@ static void irdma_fill_device_info(struct irdma_device *iwdev, struct ice_pf *pf
rf->hw.hw_addr = pf->hw.hw_addr;
rf->pcidev = pf->pdev;
rf->msix_count = pf->num_rdma_msix;
+ rf->pf_id = pf->hw.pf_id;
rf->msix_entries = &pf->msix_entries[pf->rdma_base_vector];
rf->default_vsi.vsi_idx = vsi->vsi_num;
rf->protocol_used = IRDMA_ROCE_PROTOCOL_ONLY;
diff --git a/drivers/infiniband/hw/irdma/main.h b/drivers/infiniband/hw/irdma/main.h
index 8b215f3cee89..454b4b370386 100644
--- a/drivers/infiniband/hw/irdma/main.h
+++ b/drivers/infiniband/hw/irdma/main.h
@@ -257,6 +257,7 @@ struct irdma_pci_f {
u8 *mem_rsrc;
u8 rdma_ver;
u8 rst_to;
+ u8 pf_id;
enum irdma_protocol_used protocol_used;
u32 sd_type;
u32 msix_count;
--
2.34.1
From: Ville Syrjälä <[email protected]>
commit 3ef8b5e19ead5a79600ea55f9549658281415893 upstream.
Don't just mask off all the PSF GV points when SAGV gets disabled.
This should in fact cause the Pcode to reject the request since
at least one PSF point must remain enabled at all times.
Cc: [email protected]
Cc: Stanislav Lisovskiy <[email protected]>
Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Stanislav Lisovskiy <[email protected]>
(cherry picked from commit 0fed4ddd18f064d2359b430c6e83ee60dd1f49b1)
Signed-off-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_bw.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -819,7 +819,8 @@ int intel_bw_atomic_check(struct intel_a
* cause.
*/
if (!intel_can_enable_sagv(dev_priv, new_bw_state)) {
- allowed_points = BIT(max_bw_point);
+ allowed_points &= ADLS_PSF_PT_MASK;
+ allowed_points |= BIT(max_bw_point);
drm_dbg_kms(&dev_priv->drm, "No SAGV, using single QGV point %d\n",
max_bw_point);
}
From: Peiwei Hu <[email protected]>
[ Upstream commit 52cdb013036391d9d87aba5b4fc49cdfc6ea4b23 ]
Fix leak in error path.
Signed-off-by: Peiwei Hu <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/ir_toy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/rc/ir_toy.c b/drivers/media/rc/ir_toy.c
index 1aa7989e756c..7f394277478b 100644
--- a/drivers/media/rc/ir_toy.c
+++ b/drivers/media/rc/ir_toy.c
@@ -429,7 +429,7 @@ static int irtoy_probe(struct usb_interface *intf,
err = usb_submit_urb(irtoy->urb_in, GFP_KERNEL);
if (err != 0) {
dev_err(irtoy->dev, "fail to submit in urb: %d\n", err);
- return err;
+ goto free_rcdev;
}
err = irtoy_setup(irtoy);
--
2.34.1
From: Aaron Conole <[email protected]>
[ Upstream commit 60b44ca6bd7518dd38fa2719bc9240378b6172c3 ]
During NAT, a tuple collision may occur. When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification. This will update the skb data, but not the flow key that
OVS uses. This means that future flow lookups, and packet matches will
have incorrect data. This has been supported since
5d50aa83e2c8 ("openvswitch: support asymmetric conntrack").
That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called. As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.
Fixes: 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack")
Cc: Dumitru Ceara <[email protected]>
Cc: Numan Siddique <[email protected]>
Signed-off-by: Aaron Conole <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/openvswitch/conntrack.c | 118 ++++++++++++++++++------------------
1 file changed, 59 insertions(+), 59 deletions(-)
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index 1b5eae57bc90..8f47f4e78d32 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -732,6 +732,57 @@ static bool skb_nfct_cached(struct net *net,
}
#if IS_ENABLED(CONFIG_NF_NAT)
+static void ovs_nat_update_key(struct sw_flow_key *key,
+ const struct sk_buff *skb,
+ enum nf_nat_manip_type maniptype)
+{
+ if (maniptype == NF_NAT_MANIP_SRC) {
+ __be16 src;
+
+ key->ct_state |= OVS_CS_F_SRC_NAT;
+ if (key->eth.type == htons(ETH_P_IP))
+ key->ipv4.addr.src = ip_hdr(skb)->saddr;
+ else if (key->eth.type == htons(ETH_P_IPV6))
+ memcpy(&key->ipv6.addr.src, &ipv6_hdr(skb)->saddr,
+ sizeof(key->ipv6.addr.src));
+ else
+ return;
+
+ if (key->ip.proto == IPPROTO_UDP)
+ src = udp_hdr(skb)->source;
+ else if (key->ip.proto == IPPROTO_TCP)
+ src = tcp_hdr(skb)->source;
+ else if (key->ip.proto == IPPROTO_SCTP)
+ src = sctp_hdr(skb)->source;
+ else
+ return;
+
+ key->tp.src = src;
+ } else {
+ __be16 dst;
+
+ key->ct_state |= OVS_CS_F_DST_NAT;
+ if (key->eth.type == htons(ETH_P_IP))
+ key->ipv4.addr.dst = ip_hdr(skb)->daddr;
+ else if (key->eth.type == htons(ETH_P_IPV6))
+ memcpy(&key->ipv6.addr.dst, &ipv6_hdr(skb)->daddr,
+ sizeof(key->ipv6.addr.dst));
+ else
+ return;
+
+ if (key->ip.proto == IPPROTO_UDP)
+ dst = udp_hdr(skb)->dest;
+ else if (key->ip.proto == IPPROTO_TCP)
+ dst = tcp_hdr(skb)->dest;
+ else if (key->ip.proto == IPPROTO_SCTP)
+ dst = sctp_hdr(skb)->dest;
+ else
+ return;
+
+ key->tp.dst = dst;
+ }
+}
+
/* Modelled after nf_nat_ipv[46]_fn().
* range is only used for new, uninitialized NAT state.
* Returns either NF_ACCEPT or NF_DROP.
@@ -739,7 +790,7 @@ static bool skb_nfct_cached(struct net *net,
static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
enum ip_conntrack_info ctinfo,
const struct nf_nat_range2 *range,
- enum nf_nat_manip_type maniptype)
+ enum nf_nat_manip_type maniptype, struct sw_flow_key *key)
{
int hooknum, nh_off, err = NF_ACCEPT;
@@ -811,58 +862,11 @@ static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
push:
skb_push_rcsum(skb, nh_off);
- return err;
-}
-
-static void ovs_nat_update_key(struct sw_flow_key *key,
- const struct sk_buff *skb,
- enum nf_nat_manip_type maniptype)
-{
- if (maniptype == NF_NAT_MANIP_SRC) {
- __be16 src;
-
- key->ct_state |= OVS_CS_F_SRC_NAT;
- if (key->eth.type == htons(ETH_P_IP))
- key->ipv4.addr.src = ip_hdr(skb)->saddr;
- else if (key->eth.type == htons(ETH_P_IPV6))
- memcpy(&key->ipv6.addr.src, &ipv6_hdr(skb)->saddr,
- sizeof(key->ipv6.addr.src));
- else
- return;
-
- if (key->ip.proto == IPPROTO_UDP)
- src = udp_hdr(skb)->source;
- else if (key->ip.proto == IPPROTO_TCP)
- src = tcp_hdr(skb)->source;
- else if (key->ip.proto == IPPROTO_SCTP)
- src = sctp_hdr(skb)->source;
- else
- return;
-
- key->tp.src = src;
- } else {
- __be16 dst;
-
- key->ct_state |= OVS_CS_F_DST_NAT;
- if (key->eth.type == htons(ETH_P_IP))
- key->ipv4.addr.dst = ip_hdr(skb)->daddr;
- else if (key->eth.type == htons(ETH_P_IPV6))
- memcpy(&key->ipv6.addr.dst, &ipv6_hdr(skb)->daddr,
- sizeof(key->ipv6.addr.dst));
- else
- return;
-
- if (key->ip.proto == IPPROTO_UDP)
- dst = udp_hdr(skb)->dest;
- else if (key->ip.proto == IPPROTO_TCP)
- dst = tcp_hdr(skb)->dest;
- else if (key->ip.proto == IPPROTO_SCTP)
- dst = sctp_hdr(skb)->dest;
- else
- return;
+ /* Update the flow key if NAT successful. */
+ if (err == NF_ACCEPT)
+ ovs_nat_update_key(key, skb, maniptype);
- key->tp.dst = dst;
- }
+ return err;
}
/* Returns NF_DROP if the packet should be dropped, NF_ACCEPT otherwise. */
@@ -904,7 +908,7 @@ static int ovs_ct_nat(struct net *net, struct sw_flow_key *key,
} else {
return NF_ACCEPT; /* Connection is not NATed. */
}
- err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range, maniptype);
+ err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range, maniptype, key);
if (err == NF_ACCEPT && ct->status & IPS_DST_NAT) {
if (ct->status & IPS_SRC_NAT) {
@@ -914,17 +918,13 @@ static int ovs_ct_nat(struct net *net, struct sw_flow_key *key,
maniptype = NF_NAT_MANIP_SRC;
err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range,
- maniptype);
+ maniptype, key);
} else if (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) {
err = ovs_ct_nat_execute(skb, ct, ctinfo, NULL,
- NF_NAT_MANIP_SRC);
+ NF_NAT_MANIP_SRC, key);
}
}
- /* Mark NAT done if successful and update the flow key. */
- if (err == NF_ACCEPT)
- ovs_nat_update_key(key, skb, maniptype);
-
return err;
}
#else /* !CONFIG_NF_NAT */
--
2.34.1
From: Fangrui Song <[email protected]>
commit 60210a3d86dc57ce4a76a366e7841dda746a33f7 upstream.
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt, .got, and .got.plt sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error (later changed to a warning). Just remove (NOLOAD) to
fix the warning.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Link: https://github.com/ClangBuiltLinux/linux/issues/1597
Fixes: ab1ef68e5401 ("RISC-V: Add sections of PLT and GOT for kernel module")
Reported-by: Nathan Chancellor <[email protected]>
Signed-off-by: Fangrui Song <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/include/asm/module.lds.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/riscv/include/asm/module.lds.h
+++ b/arch/riscv/include/asm/module.lds.h
@@ -2,8 +2,8 @@
/* Copyright (C) 2017 Andes Technology Corporation */
#ifdef CONFIG_MODULE_SECTIONS
SECTIONS {
- .plt (NOLOAD) : { BYTE(0) }
- .got (NOLOAD) : { BYTE(0) }
- .got.plt (NOLOAD) : { BYTE(0) }
+ .plt : { BYTE(0) }
+ .got : { BYTE(0) }
+ .got.plt : { BYTE(0) }
}
#endif
From: Tom Rix <[email protected]>
[ Upstream commit 1521db37f0d42334a88e8ff28198a27d1ed5cd7b ]
Clang static analysis reports this issue
qlcnic_dcb.c:382:10: warning: Assigned value is
garbage or undefined
mbx_out = *val;
^ ~~~~
val is set in the qlcnic_dcb_query_hw_capability() wrapper.
If there is no query_hw_capability op in dcp, success is
returned without setting the val.
For this and similar wrappers, return -EOPNOTSUPP.
Fixes: 14d385b99059 ("qlcnic: dcb: Query adapter DCB capabilities.")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h
index 5d79ee4370bc..7519773eaca6 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h
@@ -51,7 +51,7 @@ static inline int qlcnic_dcb_get_hw_capability(struct qlcnic_dcb *dcb)
if (dcb && dcb->ops->get_hw_capability)
return dcb->ops->get_hw_capability(dcb);
- return 0;
+ return -EOPNOTSUPP;
}
static inline void qlcnic_dcb_free(struct qlcnic_dcb *dcb)
@@ -65,7 +65,7 @@ static inline int qlcnic_dcb_attach(struct qlcnic_dcb *dcb)
if (dcb && dcb->ops->attach)
return dcb->ops->attach(dcb);
- return 0;
+ return -EOPNOTSUPP;
}
static inline int
@@ -74,7 +74,7 @@ qlcnic_dcb_query_hw_capability(struct qlcnic_dcb *dcb, char *buf)
if (dcb && dcb->ops->query_hw_capability)
return dcb->ops->query_hw_capability(dcb, buf);
- return 0;
+ return -EOPNOTSUPP;
}
static inline void qlcnic_dcb_get_info(struct qlcnic_dcb *dcb)
@@ -89,7 +89,7 @@ qlcnic_dcb_query_cee_param(struct qlcnic_dcb *dcb, char *buf, u8 type)
if (dcb && dcb->ops->query_cee_param)
return dcb->ops->query_cee_param(dcb, buf, type);
- return 0;
+ return -EOPNOTSUPP;
}
static inline int qlcnic_dcb_get_cee_cfg(struct qlcnic_dcb *dcb)
@@ -97,7 +97,7 @@ static inline int qlcnic_dcb_get_cee_cfg(struct qlcnic_dcb *dcb)
if (dcb && dcb->ops->get_cee_cfg)
return dcb->ops->get_cee_cfg(dcb);
- return 0;
+ return -EOPNOTSUPP;
}
static inline void qlcnic_dcb_aen_handler(struct qlcnic_dcb *dcb, void *msg)
--
2.34.1
From: Ritesh Harjani <[email protected]>
[ Upstream commit a5c0e2fdf7cea535ba03259894dc184e5a4c2800 ]
ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and
flex_group->free_clusters. This patch fixes that.
Identified based on code review of ext4_mb_mark_bb() function.
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/mballoc.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 74e3286d0e26..9a749327336f 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3899,10 +3899,11 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_group_t group;
ext4_grpblk_t blkoff;
- int i, clen, err;
+ int i, err;
int already;
+ unsigned int clen, clen_changed;
- clen = EXT4_B2C(sbi, len);
+ clen = EXT4_NUM_B2C(sbi, len);
ext4_get_group_no_and_offset(sb, block, &group, &blkoff);
bitmap_bh = ext4_read_block_bitmap(sb, group);
@@ -3923,6 +3924,7 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
+ clen_changed = clen - already;
if (state)
ext4_set_bits(bitmap_bh->b_data, blkoff, clen);
else
@@ -3935,9 +3937,9 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
group, gdp));
}
if (state)
- clen = ext4_free_group_clusters(sb, gdp) - clen + already;
+ clen = ext4_free_group_clusters(sb, gdp) - clen_changed;
else
- clen = ext4_free_group_clusters(sb, gdp) + clen - already;
+ clen = ext4_free_group_clusters(sb, gdp) + clen_changed;
ext4_free_group_clusters_set(sb, gdp, clen);
ext4_block_bitmap_csum_set(sb, group, gdp, bitmap_bh);
@@ -3947,10 +3949,13 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, group);
+ struct flex_groups *fg = sbi_array_rcu_deref(sbi,
+ s_flex_groups, flex_group);
- atomic64_sub(len,
- &sbi_array_rcu_deref(sbi, s_flex_groups,
- flex_group)->free_clusters);
+ if (state)
+ atomic64_sub(clen_changed, &fg->free_clusters);
+ else
+ atomic64_add(clen_changed, &fg->free_clusters);
}
err = ext4_handle_dirty_metadata(NULL, NULL, bitmap_bh);
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit a6dab6607d4681d227905d5198710b575dbdb519 upstream.
UBIFS should make sure the flash has enough space to store dirty (Data
that is newer than disk) data (in memory), space budget is exactly
designed to do that. If space budget calculates less data than we need,
'make_reservation()' will do more work(return -ENOSPC if no free space
lelf, sometimes we can see "cannot reserve xxx bytes in jhead xxx, error
-28" in ubifs error messages) with ubifs inodes locked, which may effect
other syscalls.
A simple way to decide how much space do we need when make a budget:
See how much space is needed by 'make_reservation()' in ubifs_jnl_xxx()
function according to corresponding operation.
It's better to report ENOSPC in ubifs_budget_space(), as early as we can.
Fixes: 474b93704f32163 ("ubifs: Implement O_TMPFILE")
Fixes: 1e51764a3c2ac05 ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -428,15 +428,18 @@ static int ubifs_tmpfile(struct user_nam
{
struct inode *inode;
struct ubifs_info *c = dir->i_sb->s_fs_info;
- struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1};
+ struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
+ .dirtied_ino = 1};
struct ubifs_budget_req ino_req = { .dirtied_ino = 1 };
struct ubifs_inode *ui;
int err, instantiated = 0;
struct fscrypt_name nm;
/*
- * Budget request settings: new dirty inode, new direntry,
- * budget for dirtied inode will be released via writeback.
+ * Budget request settings: new inode, new direntry, changing the
+ * parent directory inode.
+ * Allocate budget separately for new dirtied inode, the budget will
+ * be released via writeback.
*/
dbg_gen("dent '%pd', mode %#hx in dir ino %lu",
@@ -979,7 +982,8 @@ static int ubifs_mkdir(struct user_names
struct ubifs_inode *dir_ui = ubifs_inode(dir);
struct ubifs_info *c = dir->i_sb->s_fs_info;
int err, sz_change;
- struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1 };
+ struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
+ .dirtied_ino = 1};
struct fscrypt_name nm;
/*
From: Hangbin Liu <[email protected]>
[ Upstream commit cec74489a8dee93053340ec88ea938ff4008c3c0 ]
Use temp netns instead of hard code name for testing in case the netns
already exists.
Remove the hard code interface index when creating the veth interfaces.
Because when the system loads some virtual interface modules, e.g. tunnels.
the ifindex of 2 will be used and the cmd will fail.
As the netns has not created if checking environment failed. Trap the
clean up function after checking env.
Fixes: 8955c1a32987 ("selftests/bpf/xdp_redirect_multi: Limit the tests in netns")
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: William Tu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../selftests/bpf/test_xdp_redirect_multi.sh | 60 ++++++++++---------
1 file changed, 31 insertions(+), 29 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_xdp_redirect_multi.sh b/tools/testing/selftests/bpf/test_xdp_redirect_multi.sh
index 05f872740999..cc57cb87e65f 100755
--- a/tools/testing/selftests/bpf/test_xdp_redirect_multi.sh
+++ b/tools/testing/selftests/bpf/test_xdp_redirect_multi.sh
@@ -32,6 +32,11 @@ DRV_MODE="xdpgeneric xdpdrv xdpegress"
PASS=0
FAIL=0
LOG_DIR=$(mktemp -d)
+declare -a NS
+NS[0]="ns0-$(mktemp -u XXXXXX)"
+NS[1]="ns1-$(mktemp -u XXXXXX)"
+NS[2]="ns2-$(mktemp -u XXXXXX)"
+NS[3]="ns3-$(mktemp -u XXXXXX)"
test_pass()
{
@@ -47,11 +52,9 @@ test_fail()
clean_up()
{
- for i in $(seq $NUM); do
- ip link del veth$i 2> /dev/null
- ip netns del ns$i 2> /dev/null
+ for i in $(seq 0 $NUM); do
+ ip netns del ${NS[$i]} 2> /dev/null
done
- ip netns del ns0 2> /dev/null
}
# Kselftest framework requirement - SKIP code is 4.
@@ -79,23 +82,22 @@ setup_ns()
mode="xdpdrv"
fi
- ip netns add ns0
+ ip netns add ${NS[0]}
for i in $(seq $NUM); do
- ip netns add ns$i
- ip -n ns$i link add veth0 index 2 type veth \
- peer name veth$i netns ns0 index $((1 + $i))
- ip -n ns0 link set veth$i up
- ip -n ns$i link set veth0 up
-
- ip -n ns$i addr add 192.0.2.$i/24 dev veth0
- ip -n ns$i addr add 2001:db8::$i/64 dev veth0
+ ip netns add ${NS[$i]}
+ ip -n ${NS[$i]} link add veth0 type veth peer name veth$i netns ${NS[0]}
+ ip -n ${NS[$i]} link set veth0 up
+ ip -n ${NS[0]} link set veth$i up
+
+ ip -n ${NS[$i]} addr add 192.0.2.$i/24 dev veth0
+ ip -n ${NS[$i]} addr add 2001:db8::$i/64 dev veth0
# Add a neigh entry for IPv4 ping test
- ip -n ns$i neigh add 192.0.2.253 lladdr 00:00:00:00:00:01 dev veth0
- ip -n ns$i link set veth0 $mode obj \
+ ip -n ${NS[$i]} neigh add 192.0.2.253 lladdr 00:00:00:00:00:01 dev veth0
+ ip -n ${NS[$i]} link set veth0 $mode obj \
xdp_dummy.o sec xdp &> /dev/null || \
{ test_fail "Unable to load dummy xdp" && exit 1; }
IFACES="$IFACES veth$i"
- veth_mac[$i]=$(ip -n ns0 link show veth$i | awk '/link\/ether/ {print $2}')
+ veth_mac[$i]=$(ip -n ${NS[0]} link show veth$i | awk '/link\/ether/ {print $2}')
done
}
@@ -104,10 +106,10 @@ do_egress_tests()
local mode=$1
# mac test
- ip netns exec ns2 tcpdump -e -i veth0 -nn -l -e &> ${LOG_DIR}/mac_ns1-2_${mode}.log &
- ip netns exec ns3 tcpdump -e -i veth0 -nn -l -e &> ${LOG_DIR}/mac_ns1-3_${mode}.log &
+ ip netns exec ${NS[2]} tcpdump -e -i veth0 -nn -l -e &> ${LOG_DIR}/mac_ns1-2_${mode}.log &
+ ip netns exec ${NS[3]} tcpdump -e -i veth0 -nn -l -e &> ${LOG_DIR}/mac_ns1-3_${mode}.log &
sleep 0.5
- ip netns exec ns1 ping 192.0.2.254 -i 0.1 -c 4 &> /dev/null
+ ip netns exec ${NS[1]} ping 192.0.2.254 -i 0.1 -c 4 &> /dev/null
sleep 0.5
pkill tcpdump
@@ -123,18 +125,18 @@ do_ping_tests()
local mode=$1
# ping6 test: echo request should be redirect back to itself, not others
- ip netns exec ns1 ip neigh add 2001:db8::2 dev veth0 lladdr 00:00:00:00:00:02
+ ip netns exec ${NS[1]} ip neigh add 2001:db8::2 dev veth0 lladdr 00:00:00:00:00:02
- ip netns exec ns1 tcpdump -i veth0 -nn -l -e &> ${LOG_DIR}/ns1-1_${mode}.log &
- ip netns exec ns2 tcpdump -i veth0 -nn -l -e &> ${LOG_DIR}/ns1-2_${mode}.log &
- ip netns exec ns3 tcpdump -i veth0 -nn -l -e &> ${LOG_DIR}/ns1-3_${mode}.log &
+ ip netns exec ${NS[1]} tcpdump -i veth0 -nn -l -e &> ${LOG_DIR}/ns1-1_${mode}.log &
+ ip netns exec ${NS[2]} tcpdump -i veth0 -nn -l -e &> ${LOG_DIR}/ns1-2_${mode}.log &
+ ip netns exec ${NS[3]} tcpdump -i veth0 -nn -l -e &> ${LOG_DIR}/ns1-3_${mode}.log &
sleep 0.5
# ARP test
- ip netns exec ns1 arping -q -c 2 -I veth0 192.0.2.254
+ ip netns exec ${NS[1]} arping -q -c 2 -I veth0 192.0.2.254
# IPv4 test
- ip netns exec ns1 ping 192.0.2.253 -i 0.1 -c 4 &> /dev/null
+ ip netns exec ${NS[1]} ping 192.0.2.253 -i 0.1 -c 4 &> /dev/null
# IPv6 test
- ip netns exec ns1 ping6 2001:db8::2 -i 0.1 -c 2 &> /dev/null
+ ip netns exec ${NS[1]} ping6 2001:db8::2 -i 0.1 -c 2 &> /dev/null
sleep 0.5
pkill tcpdump
@@ -180,7 +182,7 @@ do_tests()
xdpgeneric) drv_p="-S";;
esac
- ip netns exec ns0 ./xdp_redirect_multi $drv_p $IFACES &> ${LOG_DIR}/xdp_redirect_${mode}.log &
+ ip netns exec ${NS[0]} ./xdp_redirect_multi $drv_p $IFACES &> ${LOG_DIR}/xdp_redirect_${mode}.log &
xdp_pid=$!
sleep 1
if ! ps -p $xdp_pid > /dev/null; then
@@ -197,10 +199,10 @@ do_tests()
kill $xdp_pid
}
-trap clean_up EXIT
-
check_env
+trap clean_up EXIT
+
for mode in ${DRV_MODE}; do
setup_ns $mode
do_tests $mode
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit 4f2262a334641e05f645364d5ade1f565c85f20b upstream.
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link].
Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214785
Reported-by: Chengsong Ke <[email protected]>
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/io.c | 34 ++++++++++++++++++++++++++++++----
1 file changed, 30 insertions(+), 4 deletions(-)
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -833,16 +833,42 @@ int ubifs_wbuf_write_nolock(struct ubifs
*/
n = aligned_len >> c->max_write_shift;
if (n) {
- n <<= c->max_write_shift;
+ int m = n - 1;
+
dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum,
wbuf->offs);
- err = ubifs_leb_write(c, wbuf->lnum, buf + written,
- wbuf->offs, n);
+
+ if (m) {
+ /* '(n-1)<<c->max_write_shift < len' is always true. */
+ m <<= c->max_write_shift;
+ err = ubifs_leb_write(c, wbuf->lnum, buf + written,
+ wbuf->offs, m);
+ if (err)
+ goto out;
+ wbuf->offs += m;
+ aligned_len -= m;
+ len -= m;
+ written += m;
+ }
+
+ /*
+ * The non-written len of buf may be less than 'n' because
+ * parameter 'len' is not 8 bytes aligned, so here we read
+ * min(len, n) bytes from buf.
+ */
+ n = 1 << c->max_write_shift;
+ memcpy(wbuf->buf, buf + written, min(len, n));
+ if (n > len) {
+ ubifs_assert(c, n - len < 8);
+ ubifs_pad(c, wbuf->buf + len, n - len);
+ }
+
+ err = ubifs_leb_write(c, wbuf->lnum, wbuf->buf, wbuf->offs, n);
if (err)
goto out;
wbuf->offs += n;
aligned_len -= n;
- len -= n;
+ len -= min(len, n);
written += n;
}
On 4/5/2022 12:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.33-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
From: Pavel Skripkin <[email protected]>
[ Upstream commit 9d7cbe2b9cf5f650067df4f402fdd799d4bbb4e1 ]
kvartet reported, that hci_uart_tx_wakeup() uses uninitialized rwsem.
The problem was in wrong place for percpu_init_rwsem() call.
hci_uart_proto::open() may register a timer whose callback may call
hci_uart_tx_wakeup(). There is a chance, that hci_uart_register_device()
thread won't be fast enough to call percpu_init_rwsem().
Fix it my moving percpu_init_rwsem() call before p->open().
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 PID: 18524 Comm: syz-executor.5 Not tainted 5.16.0-rc6 #9
...
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:951 [inline]
register_lock_class+0x148d/0x1950 kernel/locking/lockdep.c:1263
__lock_acquire+0x106/0x57e0 kernel/locking/lockdep.c:4906
lock_acquire kernel/locking/lockdep.c:5637 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5602
percpu_down_read_trylock include/linux/percpu-rwsem.h:92 [inline]
hci_uart_tx_wakeup+0x12e/0x490 drivers/bluetooth/hci_ldisc.c:124
h5_timed_event+0x32f/0x6a0 drivers/bluetooth/hci_h5.c:188
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
Fixes: d73e17281665 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
Reported-by: Yiru Xu <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_serdev.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index 3b00d82d36cf..4cda890ce647 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -305,6 +305,8 @@ int hci_uart_register_device(struct hci_uart *hu,
if (err)
return err;
+ percpu_init_rwsem(&hu->proto_lock);
+
err = p->open(hu);
if (err)
goto err_open;
@@ -327,7 +329,6 @@ int hci_uart_register_device(struct hci_uart *hu,
INIT_WORK(&hu->init_ready, hci_uart_init_work);
INIT_WORK(&hu->write_work, hci_uart_write_work);
- percpu_init_rwsem(&hu->proto_lock);
/* Only when vendor specific setup callback is provided, consider
* the manufacturer information valid. This avoids filling in the
--
2.34.1
On Wed, 6 Apr 2022 at 01:06, Shuah Khan <[email protected]> wrote:
>
> On 4/5/22 1:17 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.33 release.
> > There are 913 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.33-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Build failed on my system. The following is the problem commit. There
> are no changes to the config between 5.15.32 and this build.
>
> Ranjani Sridharan <[email protected]>
> ASoC: SOF: Intel: hda: Remove link assignment limitation
I saw the same build error, after applying the following patches it
builds fine again.
a792bfc1c2bc ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround")
81ed6770ba67 ("ASoC: SOF: Intel: hda: expose get_chip_info()")
Cheers,
Anders
>
> CC [M] sound/soc/sof/intel/hda-dai.o
> sound/soc/sof/intel/hda-dai.c: In function ‘hda_link_stream_assign’:
> sound/soc/sof/intel/hda-dai.c:86:24: error: implicit declaration of function ‘get_chip_info’; did you mean ‘get_group_info’? [-Werror=implicit-function-declaration]
> 86 | chip = get_chip_info(sdev->pdata);
> | ^~~~~~~~~~~~~
> | get_group_info
> sound/soc/sof/intel/hda-dai.c:86:22: error: assignment to ‘const struct sof_intel_dsp_desc *’ from ‘int’ makes pointer from integer without a cast [-Werror=int-conversion]
> 86 | chip = get_chip_info(sdev->pdata);
> | ^
> sound/soc/sof/intel/hda-dai.c:94:35: error: ‘const struct sof_intel_dsp_desc’ has no member named ‘quirks’
> 94 | if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) {
> | ^~
> sound/soc/sof/intel/hda-dai.c:94:46: error: ‘SOF_INTEL_PROCEN_FMT_QUIRK’ undeclared (first use in this function)
> 94 | if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) {
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~
> sound/soc/sof/intel/hda-dai.c:94:46: note: each undeclared identifier is reported only once for each function it appears in
> cc1: all warnings being treated as errors
> make[4]: *** [scripts/Makefile.build:287: sound/soc/sof/intel/hda-dai.o] Error 1
> make[3]: *** [scripts/Makefile.build:549: sound/soc/sof/intel] Error 2
> make[2]: *** [scripts/Makefile.build:549: sound/soc/sof] Error 2
> make[1]: *** [scripts/Makefile.build:549: sound/soc] Error 2
> make: *** [Makefile:1846: sound] Error 2
>
> thanks,
> -- Shuah
Hi Greg,
On Tue, Apr 05, 2022 at 09:17:42AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20220314): 62 configs -> no failure
arm (gcc version 11.2.1 20220314): 100 configs -> no new failure
arm64 (gcc version 11.2.1 20220314): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20220314): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]
[1]. https://openqa.qa.codethink.co.uk/tests/980
[2]. https://openqa.qa.codethink.co.uk/tests/982
[3]. https://openqa.qa.codethink.co.uk/tests/984
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On Tue, Apr 05, 2022 at 09:17:42AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 488 pass: 488 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Tue, Apr 05, 2022 at 09:23:09AM +0200, Greg Kroah-Hartman wrote:
> From: Alexey Dobriyan <[email protected]>
>
> [ Upstream commit 839b395eb9c13ae56ea5fc3ca9802734a72293f0 ]
>
> Codegen become bloated again after simple_strntoull() introduction
>
> add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-224 (-224)
> -static unsigned long long simple_strntoull(const char *startp, size_t max_chars,
> - char **endp, unsigned int base)
> +static noinline unsigned long long simple_strntoull(const char *startp, size_t max_chars, char **endp, unsigned int base)
This patch doesn't fix any bugs, why it is selected?
On Wed, 6 Apr 2022 at 13:23, Sasha Levin <[email protected]> wrote:
>
> On Tue, Apr 05, 2022 at 12:01:19PM +0200, Ard Biesheuvel wrote:
> >On Tue, 5 Apr 2022 at 11:54, Greg Kroah-Hartman
> ><[email protected]> wrote:
> >>
> >> From: Ard Biesheuvel <[email protected]>
> >>
> >> [ Upstream commit d11967870815b5ab89843980e35aab616c97c463 ]
> >>
> >> Tweak the ftrace return paths to avoid redundant loads of SP, as well as
> >> unnecessary clobbering of IP.
> >>
> >> This also fixes the inconsistency of using MOV to perform a function
> >> return, which is sub-optimal on recent micro-architectures but more
> >> importantly, does not perform an interworking return, unlike compiler
> >> generated function returns in Thumb2 builds.
> >>
> >> Let's fix this by popping PC from the stack like most ordinary code
> >> does.
> >>
> >> Signed-off-by: Ard Biesheuvel <[email protected]>
> >> Reviewed-by: Steven Rostedt (Google) <[email protected]>
> >> Signed-off-by: Sasha Levin <[email protected]>
> >
> >Please drop all the 32-bit ARM patches authored by me from the stable
> >queues except the ones that have fixes tags. These are highly likely
>
> I can drop you from future selections as well.
>
Yes, please. Just disregard all of my patches, unless they have a
fixes or cc:stable, or someone suggests them explicitly.
> >to cause an explosion of regressions, and they should have never been
> >selected, as I don't remember anyone proposing these for stable.
>
> They were proposed by the bot last week
> (https://lore.kernel.org/lkml/[email protected]/).
>
Yeah, we should really not be using a bot for that.
On Tue, 5 Apr 2022 at 14:50, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.33-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
NOTE:
Anders enabled extra kconfigs to reproduce Shuah reported build regression
and proposed two additional two commits for the fix.
## Build
* kernel: 5.15.33-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.15.y
* git commit: 841880eaff92b260de5b0fe749c05c6371bcc78c
* git describe: v5.15.32-914-g841880eaff92
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.32-914-g841880eaff92
## Test Regressions (compared to v5.15.32-902-g1a1c2efda160)
No test regressions found.
## Metric Regressions (compared to v5.15.32-902-g1a1c2efda160)
No metric regressions found.
## Test Fixes (compared to v5.15.32-902-g1a1c2efda160)
No test fixes found.
## Metric Fixes (compared to v5.15.32-902-g1a1c2efda160)
No metric fixes found.
## Test result summary
total: 101817, pass: 85899, fail: 973, skip: 13901, xfail: 1044
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 291 total, 291 passed, 0 failed
* arm64: 41 total, 41 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 40 total, 40 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 54 passed, 6 failed
* riscv: 27 total, 22 passed, 5 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 41 total, 41 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
On Wed, Apr 06, 2022 at 11:52:18AM +0200, Anders Roxell wrote:
> On Wed, 6 Apr 2022 at 01:06, Shuah Khan <[email protected]> wrote:
> >
> > On 4/5/22 1:17 AM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 5.15.33 release.
> > > There are 913 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.33-rc1.gz
> > > or in the git tree and branch at:
> > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> > >
> >
> > Build failed on my system. The following is the problem commit. There
> > are no changes to the config between 5.15.32 and this build.
> >
> > Ranjani Sridharan <[email protected]>
> > ASoC: SOF: Intel: hda: Remove link assignment limitation
>
> I saw the same build error, after applying the following patches it
> builds fine again.
>
> a792bfc1c2bc ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround")
> 81ed6770ba67 ("ASoC: SOF: Intel: hda: expose get_chip_info()")
Thanks, but I'll just go drop the offending commit here. If this is
still needed in the stable trees, can someone email stable@vger with the
needed information and I will be glad to reconsider it.
greg k-h
On 05/04/22 14.17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0) and
powerpc (ps3_defconfig, gcc 11.2.0).
Tested-by: Bagas Sanjaya <[email protected]>
--
An old man doll... just what I always wanted! - Clara
On Tue, Apr 05, 2022 at 01:58:57PM +0200, Holger Hoffst?tte wrote:
> (cc'ing Valentin)
>
> On 2022-04-05 09:17, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.33 release.
> > There are 913 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
>
> This locks up immediately when trying to use tracepoints, due to:
> "sched-tracing-don-t-re-read-p-state-when-emitting-sc.patch" aka
> "sched/tracing: Don't re-read p->state when emitting sched_switch event"
>
> Reverting this patch makes things work again, at least for 5.15.x;
> don't know about other series.
Thanks for letting me know, I've now dropped it from all of the queues.
greg k-h
On Wed, Apr 06, 2022 at 03:34:52PM +0300, Alexey Dobriyan wrote:
> On Tue, Apr 05, 2022 at 09:23:09AM +0200, Greg Kroah-Hartman wrote:
> > From: Alexey Dobriyan <[email protected]>
> >
> > [ Upstream commit 839b395eb9c13ae56ea5fc3ca9802734a72293f0 ]
> >
> > Codegen become bloated again after simple_strntoull() introduction
> >
> > add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-224 (-224)
>
> > -static unsigned long long simple_strntoull(const char *startp, size_t max_chars,
> > - char **endp, unsigned int base)
> > +static noinline unsigned long long simple_strntoull(const char *startp, size_t max_chars, char **endp, unsigned int base)
>
> This patch doesn't fix any bugs, why it is selected?
Easy change to make the kernel a tiny bit smaller?
On Tue, 5 Apr 2022 09:17:42 +0200, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.33-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.15.33-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
On 4/5/22 12:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.33 release.
> There are 913 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.33-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <[email protected]>