This is the start of the stable review cycle for the 4.14.175 release.
There are 148 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.175-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.175-rc1
Madalin Bucur <[email protected]>
arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode
Madalin Bucur <[email protected]>
arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id
Nick Hudson <[email protected]>
ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
Sungbo Eo <[email protected]>
ARM: dts: oxnas: Fix clear-mask property
disconnect3d <[email protected]>
perf map: Fix off by one in strncpy() size argument
Ilie Halip <[email protected]>
arm64: alternative: fix build with clang integrated assembler
Marek Vasut <[email protected]>
net: ks8851-ml: Fix IO operations, again
Hans de Goede <[email protected]>
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model
Greg Kroah-Hartman <[email protected]>
bpf: Explicitly memset some bpf info structures declared on the stack
Greg Kroah-Hartman <[email protected]>
bpf: Explicitly memset the bpf_attr structure
Georg Müller <[email protected]>
platform/x86: pmc_atom: Add Lex 2I385SW to critclk_systems DMI table
Eric Biggers <[email protected]>
vt: vt_ioctl: fix use-after-free in vt_in_use()
Eric Biggers <[email protected]>
vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
Eric Biggers <[email protected]>
vt: vt_ioctl: remove unnecessary console allocation checks
Jiri Slaby <[email protected]>
vt: switch vt_dont_switch to bool
Jiri Slaby <[email protected]>
vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines
Jiri Slaby <[email protected]>
vt: selection, introduce vc_is_sel
Johannes Berg <[email protected]>
mac80211: fix authentication with iwlwifi/mvm
Jouni Malinen <[email protected]>
mac80211: Check port authorization in the ieee80211_tx_dequeue() case
Johan Hovold <[email protected]>
media: xirlink_cit: add missing descriptor sanity checks
Johan Hovold <[email protected]>
media: stv06xx: add missing descriptor sanity checks
Johan Hovold <[email protected]>
media: dib0700: fix rc endpoint lookup
Johan Hovold <[email protected]>
media: ov519: add missing endpoint sanity checks
Eric Biggers <[email protected]>
libfs: fix infoleak in simple_attr_read()
Qiujun Huang <[email protected]>
staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
Qiujun Huang <[email protected]>
staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usb
Larry Finger <[email protected]>
staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table
Johan Hovold <[email protected]>
media: usbtv: fix control-message timeouts
Johan Hovold <[email protected]>
media: flexcop-usb: fix endpoint sanity check
Mans Rullgard <[email protected]>
usb: musb: fix crash with highmen PIO and usbmon
Qiujun Huang <[email protected]>
USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
Matthias Reichl <[email protected]>
USB: cdc-acm: restore capability check order
Pawel Dembicki <[email protected]>
USB: serial: option: add Wistron Neweb D19Q1
Pawel Dembicki <[email protected]>
USB: serial: option: add BroadMobi BM806U
Pawel Dembicki <[email protected]>
USB: serial: option: add support for ASKEY WWHC050
David Howells <[email protected]>
afs: Fix some tracing details
Dan Carpenter <[email protected]>
Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
Gustavo A. R. Silva <[email protected]>
Input: raydium_i2c_ts - use true and false for boolean values
Torsten Hilbrich <[email protected]>
vti6: Fix memory leak of skb if input policy check fails
Pablo Neira Ayuso <[email protected]>
netfilter: nft_fwd_netdev: validate family and chain type
YueHaibing <[email protected]>
xfrm: policy: Fix doulbe free in xfrm_policy_timer
Xin Long <[email protected]>
xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
Xin Long <[email protected]>
xfrm: fix uctx len check in verify_sec_ctx_len
Maor Gottlieb <[email protected]>
RDMA/mlx5: Block delay drop to unprivileged users
Nicolas Dichtel <[email protected]>
vti[6]: fix packet tx through bpf_redirect() in XinY cases
Raed Salem <[email protected]>
xfrm: handle NETDEV_UNREGISTER for xfrm device
Edward Cree <[email protected]>
genirq: Fix reference leaks on irq affinity notifiers
Mike Marciniszyn <[email protected]>
RDMA/core: Ensure security pkey modify is not lost
Hans de Goede <[email protected]>
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model
Hans de Goede <[email protected]>
gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option
Hans de Goede <[email protected]>
gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk
Johannes Berg <[email protected]>
mac80211: mark station unauthorized before key removal
Martin K. Petersen <[email protected]>
scsi: sd: Fix optimal I/O size for devices that change reported values
Dirk Mueller <[email protected]>
scripts/dtc: Remove redundant YYLOC global declaration
Masami Hiramatsu <[email protected]>
tools: Let O= makes handle a relative path with -C option
Masami Hiramatsu <[email protected]>
perf probe: Do not depend on dwfl_module_addrsym()
Roger Quadros <[email protected]>
ARM: dts: omap5: Add bus_dma_limit for L3 bus
Roger Quadros <[email protected]>
ARM: dts: dra7: Add bus_dma_limit for L3 bus
Eugene Syromiatnikov <[email protected]>
Input: avoid BIT() macro usage in the serio.h UAPI header
Yussuf Khalil <[email protected]>
Input: synaptics - enable RMI on HP Envy 13-ad105ng
Chuhong Yuan <[email protected]>
i2c: hix5hd2: add missed clk_disable_unprepare in remove
Jiri Kosina <[email protected]>
ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()
Mark Rutland <[email protected]>
arm64: compat: map SPSR_ELx<->PSR for signals
Mark Rutland <[email protected]>
arm64: ptrace: map SPSR_ELx<->PSR for compat tasks
Dominik Czarnota <[email protected]>
sxgbe: Fix off by one in samsung driver strncpy size arg
Nathan Chancellor <[email protected]>
dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroom
Nicolas Cavallari <[email protected]>
mac80211: Do not send mesh HWMP PREQ if HWMP is disabled
Wen Xiong <[email protected]>
scsi: ipr: Fix softlockup when rescanning devices in petitboot
Madalin Bucur <[email protected]>
fsl/fman: detect FMan erratum A050385
Madalin Bucur <[email protected]>
arm64: dts: ls1043a: FMan erratum A050385
Madalin Bucur <[email protected]>
dt-bindings: net: FMan erratum A050385
Tycho Andersen <[email protected]>
cgroup1: don't call release_agent when it is ""
Dajun Jin <[email protected]>
drivers/of/of_mdio.c:fix of_mdiobus_register()
Mike Gilbert <[email protected]>
cpupower: avoid multiple definition with gcc -fno-common
Vasily Averin <[email protected]>
cgroup-v1: cgroup_pidlist_next should update position index
Sabrina Dubroca <[email protected]>
net: ipv4: don't let PMTU updates increase route MTU
Taehee Yoo <[email protected]>
hsr: set .netnsok flag
Taehee Yoo <[email protected]>
hsr: add restart routine into hsr_get_node_list()
Taehee Yoo <[email protected]>
hsr: use rcu_read_lock() in hsr_get_node_{list/status}()
Taehee Yoo <[email protected]>
vxlan: check return value of gro_cells_init()
René van Dorst <[email protected]>
net: dsa: mt7530: Change the LINK bit to reflect the link status
Edwin Peer <[email protected]>
bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()
Oliver Hartkopp <[email protected]>
slcan: not call free_netdev before rtnl_unlock in slcan_open
Dan Carpenter <[email protected]>
NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()
Emil Renner Berthing <[email protected]>
net: stmmac: dwmac-rk: fix error path in rk_gmac_probe
Cong Wang <[email protected]>
net_sched: keep alloc_hash updated after hash allocation
Cong Wang <[email protected]>
net_sched: cls_route: remove the right filter from hashtable
Pawel Dembicki <[email protected]>
net: qmi_wwan: add support for ASKEY WWHC050
Willem de Bruijn <[email protected]>
net/packet: tpacket_rcv: avoid a producer race condition
Jisheng Zhang <[email protected]>
net: mvneta: Fix the case where the last poll did not process all rx
Florian Fainelli <[email protected]>
net: dsa: Fix duplicate frames flooded by learning
Willem de Bruijn <[email protected]>
macsec: restrict to ethernet devices
Taehee Yoo <[email protected]>
hsr: fix general protection fault in hsr_addr_is_self()
Lyude Paul <[email protected]>
Revert "drm/dp_mst: Skip validating ports during destruction, just ref"
Johan Hovold <[email protected]>
staging: greybus: loopback_test: fix potential path truncations
Johan Hovold <[email protected]>
staging: greybus: loopback_test: fix potential path truncation
Jernej Skrabec <[email protected]>
drm/bridge: dw-hdmi: fix AVI frame colorimetry
Cristian Marussi <[email protected]>
arm64: smp: fix crash_smp_send_stop() behaviour
Cristian Marussi <[email protected]>
arm64: smp: fix smp_send_stop() behaviour
Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Fix pop noise on ALC225
Sasha Levin <[email protected]>
Revert "ipv6: Fix handling of LLA with VRF and sockets bound to VRF"
Sasha Levin <[email protected]>
Revert "vrf: mark skb for multicast or link-local as enslaved to VRF"
Thomas Gleixner <[email protected]>
futex: Unbreak futex hashing
Peter Zijlstra <[email protected]>
futex: Fix inode life-time issue
Nathan Chancellor <[email protected]>
kbuild: Disable -Wpointer-to-enum-cast
Eugen Hristev <[email protected]>
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
Eugen Hristev <[email protected]>
iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
Anthony Mallet <[email protected]>
USB: cdc-acm: fix rounding error in TIOCSSERIAL
Anthony Mallet <[email protected]>
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
Joerg Roedel <[email protected]>
x86/mm: split vmalloc_sync_all()
Qian Cai <[email protected]>
page-flags: fix a crash at SetPageError(THP_SWAP)
Vlastimil Babka <[email protected]>
mm, slub: prevent kmalloc_node crashes and memory leaks
Linus Torvalds <[email protected]>
mm: slub: be more careful about the double cmpxchg of freelist
Chunguang Xu <[email protected]>
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
Steven Rostedt (VMware) <[email protected]>
xhci: Do not open code __print_symbolic() in xhci trace events
Corentin Labbe <[email protected]>
rtc: max8907: add missing select REGMAP_IRQ
Alexander Shishkin <[email protected]>
intel_th: pci: Add Elkhart Lake CPU support
Alexander Shishkin <[email protected]>
intel_th: Fix user-visible error codes
Samuel Thibault <[email protected]>
staging/speakup: fix get_word non-space look-ahead
Michael Straube <[email protected]>
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
Michał Mirosław <[email protected]>
mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
Stephan Gerhold <[email protected]>
iio: magnetometer: ak8974: Fix negative raw values in sysfs
Fabrice Gasnier <[email protected]>
iio: trigger: stm32-timer: disable master mode when stopping
Takashi Iwai <[email protected]>
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
Takashi Iwai <[email protected]>
ALSA: pcm: oss: Avoid plugin buffer overflow
Takashi Iwai <[email protected]>
ALSA: seq: oss: Fix running status after receiving sysex
Takashi Iwai <[email protected]>
ALSA: seq: virmidi: Fix running status after receiving sysex
Takashi Iwai <[email protected]>
ALSA: line6: Fix endless MIDI read loop
Alberto Mattea <[email protected]>
usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
Scott Chen <[email protected]>
USB: serial: pl2303: add device-id for HP LD381
Ran Wang <[email protected]>
usb: host: xhci-plat: add a shutdown
Daniele Palmas <[email protected]>
USB: serial: option: add ME910G1 ECM composition 0x110b
Hans de Goede <[email protected]>
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
Kai-Heng Feng <[email protected]>
USB: Disable LPM on WD19's Realtek Hub
Jonathan Neuschäfer <[email protected]>
parse-maintainers: Mark as executable
Carlo Nonato <[email protected]>
block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
Dongli Zhang <[email protected]>
xenbus: req->err should be updated before req->state
Dongli Zhang <[email protected]>
xenbus: req->body should be updated before req->state
Mike Snitzer <[email protected]>
dm bio record: save/restore bi_end_io and bi_integrity
Daniel Axtens <[email protected]>
altera-stapl: altera_get_note: prevent write beyond end of 'key'
luanshi <[email protected]>
drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer
Marek Szyprowski <[email protected]>
drm/exynos: dsi: fix workaround for the legacy clock name
Marek Szyprowski <[email protected]>
drm/exynos: dsi: propagate error value and silence meaningless warning
Thommy Jakobsson <[email protected]>
spi/zynqmp: remove entry that causes a cs glitch
Evan Green <[email protected]>
spi: pxa2xx: Add CS control clock quirk
Kishon Vijay Abraham I <[email protected]>
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
Naveen N. Rao <[email protected]>
powerpc: Include .BTF section
Yuji Sasaki <[email protected]>
spi: qup: call spi_qup_pm_resume_runtime before suspending
-------------
Diffstat:
Documentation/devicetree/bindings/net/fsl-fman.txt | 7 ++
Makefile | 4 +-
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 1 +
arch/arm/boot/dts/dra7.dtsi | 3 +
arch/arm/boot/dts/omap5.dtsi | 1 +
arch/arm/boot/dts/ox810se.dtsi | 4 +-
arch/arm/boot/dts/ox820.dtsi | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi | 2 +
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 +-
arch/arm64/include/asm/alternative.h | 2 +-
arch/arm64/kernel/ptrace.c | 2 +
arch/arm64/kernel/signal32.c | 8 +-
arch/arm64/kernel/smp.c | 25 +++-
arch/powerpc/kernel/vmlinux.lds.S | 6 +
arch/x86/kernel/ftrace.c | 2 +
arch/x86/mm/fault.c | 26 +++-
block/bfq-cgroup.c | 9 +-
drivers/acpi/apei/ghes.c | 2 +-
drivers/gpio/gpiolib-acpi.c | 140 +++++++++++++++++----
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 46 ++++---
drivers/gpu/drm/drm_dp_mst_topology.c | 15 +--
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 12 +-
drivers/hwtracing/intel_th/msu.c | 6 +-
drivers/hwtracing/intel_th/pci.c | 5 +
drivers/i2c/busses/i2c-hix5hd2.c | 1 +
drivers/iio/adc/at91-sama5d2_adc.c | 45 ++++++-
drivers/iio/magnetometer/ak8974.c | 2 +-
drivers/iio/trigger/stm32-timer-trigger.c | 11 +-
drivers/infiniband/core/security.c | 11 +-
drivers/infiniband/hw/mlx5/qp.c | 4 +
drivers/input/mouse/synaptics.c | 1 +
drivers/input/touchscreen/raydium_i2c_ts.c | 4 +-
drivers/md/dm-bio-record.h | 15 +++
drivers/media/usb/b2c2/flexcop-usb.c | 6 +-
drivers/media/usb/dvb-usb/dib0700_core.c | 4 +-
drivers/media/usb/gspca/ov519.c | 10 ++
drivers/media/usb/gspca/stv06xx/stv06xx.c | 19 ++-
drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c | 4 +
drivers/media/usb/gspca/xirlink_cit.c | 18 ++-
drivers/media/usb/usbtv/usbtv-core.c | 2 +-
drivers/media/usb/usbtv/usbtv-video.c | 5 +-
drivers/misc/altera-stapl/altera.c | 12 +-
drivers/mmc/host/sdhci-of-at91.c | 8 +-
drivers/net/can/slcan.c | 3 +
drivers/net/dsa/mt7530.c | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 15 ++-
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 4 +-
drivers/net/ethernet/freescale/fman/Kconfig | 28 +++++
drivers/net/ethernet/freescale/fman/fman.c | 18 +++
drivers/net/ethernet/freescale/fman/fman.h | 5 +
drivers/net/ethernet/marvell/mvneta.c | 3 +-
drivers/net/ethernet/micrel/ks8851_mll.c | 56 ++++++++-
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 2 +-
drivers/net/macsec.c | 3 +
drivers/net/usb/qmi_wwan.c | 1 +
drivers/net/vrf.c | 19 +--
drivers/net/vxlan.c | 11 +-
drivers/nfc/fdp/fdp.c | 5 +-
drivers/of/of_mdio.c | 1 +
drivers/perf/arm_pmu_acpi.c | 7 +-
drivers/platform/x86/pmc_atom.c | 8 ++
drivers/rtc/Kconfig | 1 +
drivers/scsi/ipr.c | 3 +-
drivers/scsi/ipr.h | 1 +
drivers/scsi/sd.c | 4 +-
drivers/spi/spi-pxa2xx.c | 23 ++++
drivers/spi/spi-qup.c | 11 +-
drivers/spi/spi-zynqmp-gqspi.c | 3 -
drivers/staging/greybus/tools/loopback_test.c | 17 +--
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 2 +
drivers/staging/speakup/main.c | 2 +-
drivers/staging/wlan-ng/hfa384x_usb.c | 2 +
drivers/staging/wlan-ng/prism2usb.c | 1 +
drivers/tty/vt/selection.c | 5 +
drivers/tty/vt/vt.c | 30 ++++-
drivers/tty/vt/vt_ioctl.c | 80 ++++++------
drivers/usb/class/cdc-acm.c | 20 ++-
drivers/usb/core/quirks.c | 6 +
drivers/usb/host/xhci-pci.c | 3 +-
drivers/usb/host/xhci-plat.c | 1 +
drivers/usb/host/xhci-trace.h | 23 +---
drivers/usb/musb/musb_host.c | 17 +--
drivers/usb/serial/io_edgeport.c | 2 +-
drivers/usb/serial/option.c | 8 ++
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
drivers/xen/xenbus/xenbus_comms.c | 4 +
drivers/xen/xenbus/xenbus_xs.c | 9 +-
fs/afs/rxrpc.c | 4 +-
fs/inode.c | 1 +
fs/libfs.c | 8 +-
include/linux/fs.h | 1 +
include/linux/futex.h | 17 +--
include/linux/page-flags.h | 2 +-
include/linux/selection.h | 4 +-
include/linux/vmalloc.h | 5 +-
include/linux/vt_kern.h | 2 +-
include/trace/events/afs.h | 2 +-
include/uapi/linux/serio.h | 10 +-
kernel/bpf/syscall.c | 9 +-
kernel/cgroup/cgroup-v1.c | 3 +-
kernel/futex.c | 93 ++++++++------
kernel/irq/manage.c | 11 +-
kernel/notifier.c | 2 +-
mm/memcontrol.c | 10 +-
mm/nommu.c | 10 +-
mm/slub.c | 32 +++--
mm/vmalloc.c | 11 +-
net/dsa/tag_brcm.c | 2 +
net/hsr/hsr_framereg.c | 10 +-
net/hsr/hsr_netlink.c | 74 ++++++-----
net/hsr/hsr_slave.c | 8 +-
net/ipv4/Kconfig | 1 +
net/ipv4/ip_vti.c | 38 ++++--
net/ipv4/route.c | 7 +-
net/ipv6/ip6_vti.c | 34 +++--
net/ipv6/tcp_ipv6.c | 3 +-
net/mac80211/mesh_hwmp.c | 3 +-
net/mac80211/sta_info.c | 6 +
net/mac80211/tx.c | 20 ++-
net/netfilter/nft_fwd_netdev.c | 8 ++
net/packet/af_packet.c | 21 ++++
net/packet/internal.h | 5 +-
net/sched/cls_route.c | 4 +-
net/sched/cls_tcindex.c | 1 +
net/xfrm/xfrm_device.c | 1 +
net/xfrm/xfrm_policy.c | 2 +
net/xfrm/xfrm_user.c | 6 +-
scripts/Makefile.extrawarn | 1 +
scripts/dtc/dtc-lexer.l | 1 -
scripts/parse-maintainers.pl | 0
sound/core/oss/pcm_plugin.c | 12 +-
sound/core/seq/oss/seq_oss_midi.c | 1 +
sound/core/seq/seq_virmidi.c | 1 +
sound/pci/hda/patch_realtek.c | 2 +
sound/usb/line6/driver.c | 2 +-
sound/usb/line6/midibuf.c | 2 +-
tools/perf/Makefile | 2 +-
tools/perf/util/map.c | 2 +-
tools/perf/util/probe-finder.c | 11 +-
.../cpupower/utils/idle_monitor/amd_fam14h_idle.c | 2 +-
.../cpupower/utils/idle_monitor/cpuidle_sysfs.c | 2 +-
.../cpupower/utils/idle_monitor/cpupower-monitor.c | 2 +
.../cpupower/utils/idle_monitor/cpupower-monitor.h | 2 +-
tools/scripts/Makefile.include | 4 +-
147 files changed, 1099 insertions(+), 436 deletions(-)
From: Peter Zijlstra <[email protected]>
commit 8019ad13ef7f64be44d4f892af9c840179009254 upstream.
As reported by Jann, ihold() does not in fact guarantee inode
persistence. And instead of making it so, replace the usage of inode
pointers with a per boot, machine wide, unique inode identifier.
This sequence number is global, but shared (file backed) futexes are
rare enough that this should not become a performance issue.
Reported-by: Jann Horn <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/inode.c | 1
include/linux/fs.h | 1
include/linux/futex.h | 17 +++++----
kernel/futex.c | 89 +++++++++++++++++++++++++++++---------------------
4 files changed, 65 insertions(+), 43 deletions(-)
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -135,6 +135,7 @@ int inode_init_always(struct super_block
inode->i_sb = sb;
inode->i_blkbits = sb->s_blocksize_bits;
inode->i_flags = 0;
+ atomic64_set(&inode->i_sequence, 0);
atomic_set(&inode->i_count, 1);
inode->i_op = &empty_iops;
inode->i_fop = &no_open_fops;
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -645,6 +645,7 @@ struct inode {
struct rcu_head i_rcu;
};
u64 i_version;
+ atomic64_t i_sequence; /* see futex */
atomic_t i_count;
atomic_t i_dio_count;
atomic_t i_writecount;
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -34,23 +34,26 @@ long do_futex(u32 __user *uaddr, int op,
union futex_key {
struct {
+ u64 i_seq;
unsigned long pgoff;
- struct inode *inode;
- int offset;
+ unsigned int offset;
} shared;
struct {
+ union {
+ struct mm_struct *mm;
+ u64 __tmp;
+ };
unsigned long address;
- struct mm_struct *mm;
- int offset;
+ unsigned int offset;
} private;
struct {
+ u64 ptr;
unsigned long word;
- void *ptr;
- int offset;
+ unsigned int offset;
} both;
};
-#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = NULL } }
+#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = 0ULL } }
#ifdef CONFIG_FUTEX
enum {
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -445,7 +445,7 @@ static void get_futex_key_refs(union fut
switch (key->both.offset & (FUT_OFF_INODE|FUT_OFF_MMSHARED)) {
case FUT_OFF_INODE:
- ihold(key->shared.inode); /* implies smp_mb(); (B) */
+ smp_mb(); /* explicit smp_mb(); (B) */
break;
case FUT_OFF_MMSHARED:
futex_get_mm(key); /* implies smp_mb(); (B) */
@@ -479,7 +479,6 @@ static void drop_futex_key_refs(union fu
switch (key->both.offset & (FUT_OFF_INODE|FUT_OFF_MMSHARED)) {
case FUT_OFF_INODE:
- iput(key->shared.inode);
break;
case FUT_OFF_MMSHARED:
mmdrop(key->private.mm);
@@ -487,6 +486,46 @@ static void drop_futex_key_refs(union fu
}
}
+/*
+ * Generate a machine wide unique identifier for this inode.
+ *
+ * This relies on u64 not wrapping in the life-time of the machine; which with
+ * 1ns resolution means almost 585 years.
+ *
+ * This further relies on the fact that a well formed program will not unmap
+ * the file while it has a (shared) futex waiting on it. This mapping will have
+ * a file reference which pins the mount and inode.
+ *
+ * If for some reason an inode gets evicted and read back in again, it will get
+ * a new sequence number and will _NOT_ match, even though it is the exact same
+ * file.
+ *
+ * It is important that match_futex() will never have a false-positive, esp.
+ * for PI futexes that can mess up the state. The above argues that false-negatives
+ * are only possible for malformed programs.
+ */
+static u64 get_inode_sequence_number(struct inode *inode)
+{
+ static atomic64_t i_seq;
+ u64 old;
+
+ /* Does the inode already have a sequence number? */
+ old = atomic64_read(&inode->i_sequence);
+ if (likely(old))
+ return old;
+
+ for (;;) {
+ u64 new = atomic64_add_return(1, &i_seq);
+ if (WARN_ON_ONCE(!new))
+ continue;
+
+ old = atomic64_cmpxchg_relaxed(&inode->i_sequence, 0, new);
+ if (old)
+ return old;
+ return new;
+ }
+}
+
/**
* get_futex_key() - Get parameters which are the keys for a futex
* @uaddr: virtual address of the futex
@@ -499,9 +538,15 @@ static void drop_futex_key_refs(union fu
*
* The key words are stored in @key on success.
*
- * For shared mappings, it's (page->index, file_inode(vma->vm_file),
- * offset_within_page). For private mappings, it's (uaddr, current->mm).
- * We can usually work out the index without swapping in the page.
+ * For shared mappings (when @fshared), the key is:
+ * ( inode->i_sequence, page->index, offset_within_page )
+ * [ also see get_inode_sequence_number() ]
+ *
+ * For private mappings (or when !@fshared), the key is:
+ * ( current->mm, address, 0 )
+ *
+ * This allows (cross process, where applicable) identification of the futex
+ * without keeping the page pinned for the duration of the FUTEX_WAIT.
*
* lock_page() might sleep, the caller should not hold a spinlock.
*/
@@ -641,8 +686,6 @@ again:
key->private.mm = mm;
key->private.address = address;
- get_futex_key_refs(key); /* implies smp_mb(); (B) */
-
} else {
struct inode *inode;
@@ -674,40 +717,14 @@ again:
goto again;
}
- /*
- * Take a reference unless it is about to be freed. Previously
- * this reference was taken by ihold under the page lock
- * pinning the inode in place so i_lock was unnecessary. The
- * only way for this check to fail is if the inode was
- * truncated in parallel which is almost certainly an
- * application bug. In such a case, just retry.
- *
- * We are not calling into get_futex_key_refs() in file-backed
- * cases, therefore a successful atomic_inc return below will
- * guarantee that get_futex_key() will still imply smp_mb(); (B).
- */
- if (!atomic_inc_not_zero(&inode->i_count)) {
- rcu_read_unlock();
- put_page(page);
-
- goto again;
- }
-
- /* Should be impossible but lets be paranoid for now */
- if (WARN_ON_ONCE(inode->i_mapping != mapping)) {
- err = -EFAULT;
- rcu_read_unlock();
- iput(inode);
-
- goto out;
- }
-
key->both.offset |= FUT_OFF_INODE; /* inode-based key */
- key->shared.inode = inode;
+ key->shared.i_seq = get_inode_sequence_number(inode);
key->shared.pgoff = basepage_index(tail);
rcu_read_unlock();
}
+ get_futex_key_refs(key); /* implies smp_mb(); (B) */
+
out:
put_page(page);
return err;
From: Johan Hovold <[email protected]>
commit ae62cf5eb2792d9a818c2d93728ed92119357017 upstream.
Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.
snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id);
snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/",
t->sysfs_prefix, d->name);
snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s",
t->debugfs_prefix, d->name);
Fix this by separating the maximum path length from the maximum prefix
length and reducing the latter enough to fit the generated strings.
Note that we also need to reduce the device-name buffer size as GCC
isn't smart enough to figure out that we ever only used MAX_STR_LEN
bytes of it.
Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/greybus/tools/loopback_test.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
--- a/drivers/staging/greybus/tools/loopback_test.c
+++ b/drivers/staging/greybus/tools/loopback_test.c
@@ -20,6 +20,7 @@
#include <signal.h>
#define MAX_NUM_DEVICES 10
+#define MAX_SYSFS_PREFIX 0x80
#define MAX_SYSFS_PATH 0x200
#define CSV_MAX_LINE 0x1000
#define SYSFS_MAX_INT 0x20
@@ -68,7 +69,7 @@ struct loopback_results {
};
struct loopback_device {
- char name[MAX_SYSFS_PATH];
+ char name[MAX_STR_LEN];
char sysfs_entry[MAX_SYSFS_PATH];
char debugfs_entry[MAX_SYSFS_PATH];
struct loopback_results results;
@@ -94,8 +95,8 @@ struct loopback_test {
int stop_all;
int poll_count;
char test_name[MAX_STR_LEN];
- char sysfs_prefix[MAX_SYSFS_PATH];
- char debugfs_prefix[MAX_SYSFS_PATH];
+ char sysfs_prefix[MAX_SYSFS_PREFIX];
+ char debugfs_prefix[MAX_SYSFS_PREFIX];
struct timespec poll_timeout;
struct loopback_device devices[MAX_NUM_DEVICES];
struct loopback_results aggregate_results;
@@ -914,10 +915,10 @@ int main(int argc, char *argv[])
t.iteration_max = atoi(optarg);
break;
case 'S':
- snprintf(t.sysfs_prefix, MAX_SYSFS_PATH, "%s", optarg);
+ snprintf(t.sysfs_prefix, MAX_SYSFS_PREFIX, "%s", optarg);
break;
case 'D':
- snprintf(t.debugfs_prefix, MAX_SYSFS_PATH, "%s", optarg);
+ snprintf(t.debugfs_prefix, MAX_SYSFS_PREFIX, "%s", optarg);
break;
case 'm':
t.mask = atol(optarg);
@@ -968,10 +969,10 @@ int main(int argc, char *argv[])
}
if (!strcmp(t.sysfs_prefix, ""))
- snprintf(t.sysfs_prefix, MAX_SYSFS_PATH, "%s", sysfs_prefix);
+ snprintf(t.sysfs_prefix, MAX_SYSFS_PREFIX, "%s", sysfs_prefix);
if (!strcmp(t.debugfs_prefix, ""))
- snprintf(t.debugfs_prefix, MAX_SYSFS_PATH, "%s", debugfs_prefix);
+ snprintf(t.debugfs_prefix, MAX_SYSFS_PREFIX, "%s", debugfs_prefix);
ret = find_loopback_devices(&t);
if (ret)
From: Oliver Hartkopp <[email protected]>
[ Upstream commit 2091a3d42b4f339eaeed11228e0cbe9d4f92f558 ]
As the description before netdev_run_todo, we cannot call free_netdev
before rtnl_unlock, fix it by reorder the code.
This patch is a 1:1 copy of upstream slip.c commit f596c87005f7
("slip: not call free_netdev before rtnl_unlock in slip_open").
Reported-by: yangerkun <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/slcan.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -621,7 +621,10 @@ err_free_chan:
tty->disc_data = NULL;
clear_bit(SLF_INUSE, &sl->flags);
slc_free_netdev(sl->dev);
+ /* do not call free_netdev before rtnl_unlock */
+ rtnl_unlock();
free_netdev(sl->dev);
+ return err;
err_exit:
rtnl_unlock();
From: "Ren? van Dorst" <[email protected]>
[ Upstream commit 22259471b51925353bd7b16f864c79fdd76e425e ]
Andrew reported:
After a number of network port link up/down changes, sometimes the switch
port gets stuck in a state where it thinks it is still transmitting packets
but the cpu port is not actually transmitting anymore. In this state you
will see a message on the console
"mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter
in ifconfig will be incrementing on virtual port, but not incrementing on
cpu port.
The issue is that MAC TX/RX status has no impact on the link status or
queue manager of the switch. So the queue manager just queues up packets
of a disabled port and sends out pause frames when the queue is full.
Change the LINK bit to reflect the link status.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Reported-by: Andrew Smith <[email protected]>
Signed-off-by: René van Dorst <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mt7530.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -549,7 +549,7 @@ mt7530_mib_reset(struct dsa_switch *ds)
static void
mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable)
{
- u32 mask = PMCR_TX_EN | PMCR_RX_EN;
+ u32 mask = PMCR_TX_EN | PMCR_RX_EN | PMCR_FORCE_LNK;
if (enable)
mt7530_set(priv, MT7530_PMCR_P(port), mask);
From: Pawel Dembicki <[email protected]>
[ Upstream commit 12a5ba5a1994568d4ceaff9e78c6b0329d953386 ]
ASKEY WWHC050 is a mcie LTE modem.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1690 ProdID=7588 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=813f0eef6e6e
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution.
Signed-off-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Pawel Dembicki <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1139,6 +1139,7 @@ static const struct usb_device_id produc
{QMI_FIXED_INTF(0x1435, 0xd181, 4)}, /* Wistron NeWeb D18Q1 */
{QMI_FIXED_INTF(0x1435, 0xd181, 5)}, /* Wistron NeWeb D18Q1 */
{QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)}, /* Fibocom NL668 series */
+ {QMI_FIXED_INTF(0x1690, 0x7588, 4)}, /* ASKEY WWHC050 */
{QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */
{QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */
{QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */
From: Jernej Skrabec <[email protected]>
commit e8dca30f7118461d47e1c3510d0e31b277439151 upstream.
CTA-861-F explicitly states that for RGB colorspace colorimetry should
be set to "none". Fix that.
Acked-by: Laurent Pinchart <[email protected]>
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jernej Skrabec <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 46 ++++++++++++++++--------------
1 file changed, 26 insertions(+), 20 deletions(-)
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1348,28 +1348,34 @@ static void hdmi_config_AVI(struct dw_hd
frame.colorspace = HDMI_COLORSPACE_RGB;
/* Set up colorimetry */
- switch (hdmi->hdmi_data.enc_out_encoding) {
- case V4L2_YCBCR_ENC_601:
- if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV601)
- frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
- else
+ if (!hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) {
+ switch (hdmi->hdmi_data.enc_out_encoding) {
+ case V4L2_YCBCR_ENC_601:
+ if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV601)
+ frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
+ else
+ frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
+ frame.extended_colorimetry =
+ HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
+ break;
+ case V4L2_YCBCR_ENC_709:
+ if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV709)
+ frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
+ else
+ frame.colorimetry = HDMI_COLORIMETRY_ITU_709;
+ frame.extended_colorimetry =
+ HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
+ break;
+ default: /* Carries no data */
frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
+ frame.extended_colorimetry =
+ HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
+ break;
+ }
+ } else {
+ frame.colorimetry = HDMI_COLORIMETRY_NONE;
frame.extended_colorimetry =
- HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
- break;
- case V4L2_YCBCR_ENC_709:
- if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV709)
- frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
- else
- frame.colorimetry = HDMI_COLORIMETRY_ITU_709;
- frame.extended_colorimetry =
- HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
- break;
- default: /* Carries no data */
- frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
- frame.extended_colorimetry =
- HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
- break;
+ HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
}
frame.scan_mode = HDMI_SCAN_MODE_NONE;
From: Dan Carpenter <[email protected]>
[ Upstream commit 0dcdf9f64028ec3b75db6b691560f8286f3898bf ]
The nci_conn_max_data_pkt_payload_size() function sometimes returns
-EPROTO so "max_size" needs to be signed for the error handling to
work. We can make "payload_size" an int as well.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/fdp/fdp.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/nfc/fdp/fdp.c
+++ b/drivers/nfc/fdp/fdp.c
@@ -192,7 +192,7 @@ static int fdp_nci_send_patch(struct nci
const struct firmware *fw;
struct sk_buff *skb;
unsigned long len;
- u8 max_size, payload_size;
+ int max_size, payload_size;
int rc = 0;
if ((type == NCI_PATCH_TYPE_OTP && !info->otp_patch) ||
@@ -215,8 +215,7 @@ static int fdp_nci_send_patch(struct nci
while (len) {
- payload_size = min_t(unsigned long, (unsigned long) max_size,
- len);
+ payload_size = min_t(unsigned long, max_size, len);
skb = nci_skb_alloc(ndev, (NCI_CTRL_HDR_SIZE + payload_size),
GFP_KERNEL);
From: Johan Hovold <[email protected]>
commit f16023834863932f95dfad13fac3fc47f77d2f29 upstream.
Newer GCC warns about a possible truncation of a generated sysfs path
name as we're concatenating a directory path with a file name and
placing the result in a buffer that is half the size of the maximum
length of the directory path (which is user controlled).
loopback_test.c: In function 'open_poll_files':
loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=]
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~
loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by making sure the buffer is large enough the concatenated
strings.
Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Fixes: 9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify")
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/greybus/tools/loopback_test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/greybus/tools/loopback_test.c
+++ b/drivers/staging/greybus/tools/loopback_test.c
@@ -644,7 +644,7 @@ baddir:
static int open_poll_files(struct loopback_test *t)
{
struct loopback_device *dev;
- char buf[MAX_STR_LEN];
+ char buf[MAX_SYSFS_PATH + MAX_STR_LEN];
char dummy;
int fds_idx = 0;
int i;
From: Taehee Yoo <[email protected]>
[ Upstream commit 09e91dbea0aa32be02d8877bd50490813de56b9a ]
The hsr module has been supporting the list and status command.
(HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS)
These commands send node information to the user-space via generic netlink.
But, in the non-init_net namespace, these commands are not allowed
because .netnsok flag is false.
So, there is no way to get node information in the non-init_net namespace.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_netlink.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/hsr/hsr_netlink.c
+++ b/net/hsr/hsr_netlink.c
@@ -476,6 +476,7 @@ static struct genl_family hsr_genl_famil
.name = "HSR",
.version = 1,
.maxattr = HSR_A_MAX,
+ .netnsok = true,
.module = THIS_MODULE,
.ops = hsr_ops,
.n_ops = ARRAY_SIZE(hsr_ops),
From: Lyude Paul <[email protected]>
commit 9765635b30756eb74e05e260ac812659c296cd28 upstream.
This reverts commit:
c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
ugh.
In drm_dp_destroy_connector_work(), we have a pretty good chance of
freeing the actual struct drm_dp_mst_port. However, after destroying
things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is
where the problems start.
For i915, this calls all the way down to the fbcon probing helpers,
which start trying to access the port in a modeset.
[ 45.062001] ==================================================================
[ 45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180
[ 45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53
[ 45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G O 4.20.0-rc4Lyude-Test+ #3
[ 45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[ 45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper]
[ 45.062641] Call Trace:
[ 45.062685] dump_stack+0xbd/0x15a
[ 45.062735] ? dump_stack_print_info.cold.0+0x1b/0x1b
[ 45.062801] ? printk+0x9f/0xc5
[ 45.062847] ? kmsg_dump_rewind_nolock+0xe4/0xe4
[ 45.062909] ? ex_handler_refcount+0x146/0x180
[ 45.062970] print_address_description+0x71/0x239
[ 45.063036] ? ex_handler_refcount+0x146/0x180
[ 45.063095] kasan_report.cold.5+0x242/0x30b
[ 45.063155] __asan_report_store4_noabort+0x1c/0x20
[ 45.063313] ex_handler_refcount+0x146/0x180
[ 45.063371] ? ex_handler_clear_fs+0xb0/0xb0
[ 45.063428] fixup_exception+0x98/0xd7
[ 45.063484] ? raw_notifier_call_chain+0x20/0x20
[ 45.063548] do_trap+0x6d/0x210
[ 45.063605] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.063732] do_error_trap+0xc0/0x170
[ 45.063802] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.063929] do_invalid_op+0x3b/0x50
[ 45.063997] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.064103] invalid_op+0x14/0x20
[ 45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f
[ 45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282
[ 45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968
[ 45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8
[ 45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3
[ 45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28
[ 45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8
[ 45.065084] drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper]
[ 45.065225] intel_mst_disable_dp+0xda/0x180 [i915]
[ 45.065361] intel_encoders_disable.isra.107+0x197/0x310 [i915]
[ 45.065498] haswell_crtc_disable+0xbe/0x400 [i915]
[ 45.065622] ? i9xx_disable_plane+0x1c0/0x3e0 [i915]
[ 45.065750] intel_atomic_commit_tail+0x74e/0x3e60 [i915]
[ 45.065884] ? intel_pre_plane_update+0xbc0/0xbc0 [i915]
[ 45.065968] ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper]
[ 45.066054] ? kasan_check_write+0x14/0x20
[ 45.066165] ? i915_gem_track_fb+0x13a/0x330 [i915]
[ 45.066277] ? i915_sw_fence_complete+0xe9/0x140 [i915]
[ 45.066406] ? __i915_sw_fence_complete+0xc50/0xc50 [i915]
[ 45.066540] intel_atomic_commit+0x72e/0xef0 [i915]
[ 45.066635] ? drm_dev_dbg+0x200/0x200 [drm]
[ 45.066764] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[ 45.066898] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[ 45.067001] drm_atomic_commit+0xc4/0xf0 [drm]
[ 45.067074] restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper]
[ 45.067166] ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper]
[ 45.067249] ? kasan_check_read+0x11/0x20
[ 45.067324] restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper]
[ 45.067364] ? kasan_check_read+0x11/0x20
[ 45.067406] drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper]
[ 45.067462] ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper]
[ 45.067508] ? kasan_check_write+0x14/0x20
[ 45.070360] ? mutex_unlock+0x22/0x40
[ 45.073748] drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper]
[ 45.075846] drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper]
[ 45.078088] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[ 45.082614] intel_fbdev_output_poll_changed+0x9f/0x140 [i915]
[ 45.087069] drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper]
[ 45.089319] intel_dp_mst_hotplug+0x37/0x50 [i915]
[ 45.091496] drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper]
[ 45.093675] ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper]
[ 45.095851] ? kasan_check_write+0x14/0x20
[ 45.098473] ? kasan_check_read+0x11/0x20
[ 45.101155] ? strscpy+0x17c/0x530
[ 45.103808] ? __switch_to_asm+0x34/0x70
[ 45.106456] ? syscall_return_via_sysret+0xf/0x7f
[ 45.109711] ? read_word_at_a_time+0x20/0x20
[ 45.113138] ? __switch_to_asm+0x40/0x70
[ 45.116529] ? __switch_to_asm+0x34/0x70
[ 45.119891] ? __switch_to_asm+0x40/0x70
[ 45.123224] ? __switch_to_asm+0x34/0x70
[ 45.126540] ? __switch_to_asm+0x34/0x70
[ 45.129824] process_one_work+0x88d/0x15d0
[ 45.133172] ? pool_mayday_timeout+0x850/0x850
[ 45.136459] ? pci_mmcfg_check_reserved+0x110/0x128
[ 45.139739] ? wake_q_add+0xb0/0xb0
[ 45.143010] ? check_preempt_wakeup+0x652/0x1050
[ 45.146304] ? worker_enter_idle+0x29e/0x740
[ 45.149589] ? __schedule+0x1ec0/0x1ec0
[ 45.152937] ? kasan_check_read+0x11/0x20
[ 45.156179] ? _raw_spin_lock_irq+0xa3/0x130
[ 45.159382] ? _raw_read_unlock_irqrestore+0x30/0x30
[ 45.162542] ? kasan_check_write+0x14/0x20
[ 45.165657] worker_thread+0x1a5/0x1470
[ 45.168725] ? set_load_weight+0x2e0/0x2e0
[ 45.171755] ? process_one_work+0x15d0/0x15d0
[ 45.174806] ? __switch_to_asm+0x34/0x70
[ 45.177645] ? __switch_to_asm+0x40/0x70
[ 45.180323] ? __switch_to_asm+0x34/0x70
[ 45.182936] ? __switch_to_asm+0x40/0x70
[ 45.185539] ? __switch_to_asm+0x34/0x70
[ 45.188100] ? __switch_to_asm+0x40/0x70
[ 45.190628] ? __schedule+0x7d4/0x1ec0
[ 45.193143] ? save_stack+0xa9/0xd0
[ 45.195632] ? kasan_check_write+0x10/0x20
[ 45.198162] ? kasan_kmalloc+0xc4/0xe0
[ 45.200609] ? kmem_cache_alloc_trace+0xdd/0x190
[ 45.203046] ? kthread+0x9f/0x3b0
[ 45.205470] ? ret_from_fork+0x35/0x40
[ 45.207876] ? unwind_next_frame+0x43/0x50
[ 45.210273] ? __save_stack_trace+0x82/0x100
[ 45.212658] ? deactivate_slab.isra.67+0x3d4/0x580
[ 45.215026] ? default_wake_function+0x35/0x50
[ 45.217399] ? kasan_check_read+0x11/0x20
[ 45.219825] ? _raw_spin_lock_irqsave+0xae/0x140
[ 45.222174] ? __lock_text_start+0x8/0x8
[ 45.224521] ? replenish_dl_entity.cold.62+0x4f/0x4f
[ 45.226868] ? __kthread_parkme+0x87/0xf0
[ 45.229200] kthread+0x2f7/0x3b0
[ 45.231557] ? process_one_work+0x15d0/0x15d0
[ 45.233923] ? kthread_park+0x120/0x120
[ 45.236249] ret_from_fork+0x35/0x40
[ 45.240875] Allocated by task 242:
[ 45.243136] save_stack+0x43/0xd0
[ 45.245385] kasan_kmalloc+0xc4/0xe0
[ 45.247597] kmem_cache_alloc_trace+0xdd/0x190
[ 45.249793] drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper]
[ 45.252000] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[ 45.254389] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[ 45.256803] drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper]
[ 45.259200] process_one_work+0x88d/0x15d0
[ 45.261597] worker_thread+0x1a5/0x1470
[ 45.264038] kthread+0x2f7/0x3b0
[ 45.266371] ret_from_fork+0x35/0x40
[ 45.270937] Freed by task 53:
[ 45.273170] save_stack+0x43/0xd0
[ 45.275382] __kasan_slab_free+0x139/0x190
[ 45.277604] kasan_slab_free+0xe/0x10
[ 45.279826] kfree+0x99/0x1b0
[ 45.282044] drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper]
[ 45.284330] drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper]
[ 45.286660] process_one_work+0x88d/0x15d0
[ 45.288934] worker_thread+0x1a5/0x1470
[ 45.291231] kthread+0x2f7/0x3b0
[ 45.293547] ret_from_fork+0x35/0x40
[ 45.298206] The buggy address belongs to the object at ffff8882b4b70968
which belongs to the cache kmalloc-2k of size 2048
[ 45.303047] The buggy address is located 0 bytes inside of
2048-byte region [ffff8882b4b70968, ffff8882b4b71168)
[ 45.308010] The buggy address belongs to the page:
[ 45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0
[ 45.313051] flags: 0x8000000000010200(slab|head)
[ 45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40
[ 45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ 45.320966] page dumped because: kasan: bad access detected
[ 45.326312] Memory state around the buggy address:
[ 45.329085] ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 45.331845] ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[ 45.337302] ^
[ 45.340061] ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 45.342910] ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 45.345748] ==================================================================
So, this definitely isn't a fix that we want. This being said; there's
no real easy fix for this problem because of some of the catch-22's of
the MST helpers current design. For starters; we always need to validate
a port with drm_dp_get_validated_port_ref(), but validation relies on
the lifetime of the port in the actual topology. So once the port is
gone, it can't be validated again.
If we were to try to make the payload helpers not use port validation,
then we'd cause another problem: if the port isn't validated, it could
be freed and we'd just start causing more KASAN issues. There are
already hacks that attempt to workaround this in
drm_dp_mst_destroy_connector_work() by re-initializing the kref so that
it can be used again and it's memory can be freed once the VCPI helpers
finish removing the port's respective payloads. But none of these really
do anything helpful since the port still can't be validated since it's
gone from the topology. Also, that workaround is immensely confusing to
read through.
What really needs to be done in order to fix this is to teach DRM how to
track the lifetime of the structs for MST ports and branch devices
separately from their lifetime in the actual topology. Simply put; this
means having two different krefs-one that removes the port/branch device
from the topology, and one that finally calls kfree(). This would let us
simplify things, since we'd now be able to keep ports around without
having to keep them in the topology at the same time, which is exactly
what we need in order to teach our VCPI helpers to only validate ports
when it's actually necessary without running the risk of trying to use
unallocated memory.
Such a fix is on it's way, but for now let's play it safe and just
revert this. If this bug has been around for well over a year, we can
wait a little while to get an actual proper fix here.
Signed-off-by: Lyude Paul <[email protected]>
Fixes: c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
Cc: Daniel Vetter <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Jerry Zuo <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: [email protected] # v4.6+
Acked-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -982,20 +982,9 @@ static struct drm_dp_mst_port *drm_dp_ms
static struct drm_dp_mst_port *drm_dp_get_validated_port_ref(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
{
struct drm_dp_mst_port *rport = NULL;
-
mutex_lock(&mgr->lock);
- /*
- * Port may or may not be 'valid' but we don't care about that when
- * destroying the port and we are guaranteed that the port pointer
- * will be valid until we've finished
- */
- if (current_work() == &mgr->destroy_connector_work) {
- kref_get(&port->kref);
- rport = port;
- } else if (mgr->mst_primary) {
- rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary,
- port);
- }
+ if (mgr->mst_primary)
+ rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary, port);
mutex_unlock(&mgr->lock);
return rport;
}
From: Taehee Yoo <[email protected]>
[ Upstream commit ca19c70f5225771c05bcdcb832b4eb84d7271c5e ]
The hsr_get_node_list() is to send node addresses to the userspace.
If there are so many nodes, it could fail because of buffer size.
In order to avoid this failure, the restart routine is added.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_netlink.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)
--- a/net/hsr/hsr_netlink.c
+++ b/net/hsr/hsr_netlink.c
@@ -366,16 +366,14 @@ fail:
*/
static int hsr_get_node_list(struct sk_buff *skb_in, struct genl_info *info)
{
- /* For receiving */
- struct nlattr *na;
+ unsigned char addr[ETH_ALEN];
struct net_device *hsr_dev;
-
- /* For sending */
struct sk_buff *skb_out;
- void *msg_head;
struct hsr_priv *hsr;
- void *pos;
- unsigned char addr[ETH_ALEN];
+ bool restart = false;
+ struct nlattr *na;
+ void *pos = NULL;
+ void *msg_head;
int res;
if (!info)
@@ -393,8 +391,9 @@ static int hsr_get_node_list(struct sk_b
if (!is_hsr_master(hsr_dev))
goto rcu_unlock;
+restart:
/* Send reply */
- skb_out = genlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
+ skb_out = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_ATOMIC);
if (!skb_out) {
res = -ENOMEM;
goto fail;
@@ -408,17 +407,28 @@ static int hsr_get_node_list(struct sk_b
goto nla_put_failure;
}
- res = nla_put_u32(skb_out, HSR_A_IFINDEX, hsr_dev->ifindex);
- if (res < 0)
- goto nla_put_failure;
+ if (!restart) {
+ res = nla_put_u32(skb_out, HSR_A_IFINDEX, hsr_dev->ifindex);
+ if (res < 0)
+ goto nla_put_failure;
+ }
hsr = netdev_priv(hsr_dev);
- pos = hsr_get_next_node(hsr, NULL, addr);
+ if (!pos)
+ pos = hsr_get_next_node(hsr, NULL, addr);
while (pos) {
res = nla_put(skb_out, HSR_A_NODE_ADDR, ETH_ALEN, addr);
- if (res < 0)
+ if (res < 0) {
+ if (res == -EMSGSIZE) {
+ genlmsg_end(skb_out, msg_head);
+ genlmsg_unicast(genl_info_net(info), skb_out,
+ info->snd_portid);
+ restart = true;
+ goto restart;
+ }
goto nla_put_failure;
+ }
pos = hsr_get_next_node(hsr, pos, addr);
}
rcu_read_unlock();
@@ -435,7 +445,7 @@ invalid:
return 0;
nla_put_failure:
- kfree_skb(skb_out);
+ nlmsg_free(skb_out);
/* Fall through */
fail:
From: Willem de Bruijn <[email protected]>
[ Upstream commit b06d072ccc4b1acd0147b17914b7ad1caa1818bb ]
Only attach macsec to ethernet devices.
Syzbot was able to trigger a KMSAN warning in macsec_handle_frame
by attaching to a phonet device.
Macvlan has a similar check in macvlan_port_create.
v1->v2
- fix commit message typo
Reported-by: syzbot <[email protected]>
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/macsec.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -19,6 +19,7 @@
#include <net/genetlink.h>
#include <net/sock.h>
#include <net/gro_cells.h>
+#include <linux/if_arp.h>
#include <uapi/linux/if_macsec.h>
@@ -3219,6 +3220,8 @@ static int macsec_newlink(struct net *ne
real_dev = __dev_get_by_index(net, nla_get_u32(tb[IFLA_LINK]));
if (!real_dev)
return -ENODEV;
+ if (real_dev->type != ARPHRD_ETHER)
+ return -EINVAL;
dev->priv_flags |= IFF_MACSEC;
From: Joerg Roedel <[email protected]>
commit 763802b53a427ed3cbd419dbba255c414fdd9e7c upstream.
Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path. While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.
Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.
To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:
* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()
Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized. The only exception is the new call-site added in the
above mentioned commit.
Shile Zhang directed us to a report of an 80% regression in reaim
throughput.
Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()")
Reported-by: kernel test robot <[email protected]>
Reported-by: Shile Zhang <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Borislav Petkov <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]> [GHES]
Cc: Dave Hansen <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: https://lists.01.org/hyperkitty/list/[email protected]/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/fault.c | 26 ++++++++++++++++++++++++--
drivers/acpi/apei/ghes.c | 2 +-
include/linux/vmalloc.h | 5 +++--
kernel/notifier.c | 2 +-
mm/nommu.c | 10 +++++++---
mm/vmalloc.c | 11 +++++++----
6 files changed, 43 insertions(+), 13 deletions(-)
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -272,7 +272,7 @@ static inline pmd_t *vmalloc_sync_one(pg
return pmd_k;
}
-void vmalloc_sync_all(void)
+static void vmalloc_sync(void)
{
unsigned long address;
@@ -299,6 +299,16 @@ void vmalloc_sync_all(void)
}
}
+void vmalloc_sync_mappings(void)
+{
+ vmalloc_sync();
+}
+
+void vmalloc_sync_unmappings(void)
+{
+ vmalloc_sync();
+}
+
/*
* 32-bit:
*
@@ -401,11 +411,23 @@ out:
#else /* CONFIG_X86_64: */
-void vmalloc_sync_all(void)
+void vmalloc_sync_mappings(void)
{
+ /*
+ * 64-bit mappings might allocate new p4d/pud pages
+ * that need to be propagated to all tasks' PGDs.
+ */
sync_global_pgds(VMALLOC_START & PGDIR_MASK, VMALLOC_END);
}
+void vmalloc_sync_unmappings(void)
+{
+ /*
+ * Unmappings never allocate or free p4d/pud pages.
+ * No work is required here.
+ */
+}
+
/*
* 64-bit:
*
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -201,7 +201,7 @@ static int ghes_estatus_pool_expand(unsi
* New allocation must be visible in all pgd before it can be found by
* an NMI allocating from the pool.
*/
- vmalloc_sync_all();
+ vmalloc_sync_mappings();
return gen_pool_add(ghes_estatus_pool, addr, PAGE_ALIGN(len), -1);
}
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -106,8 +106,9 @@ extern int remap_vmalloc_range_partial(s
extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr,
unsigned long pgoff);
-void vmalloc_sync_all(void);
-
+void vmalloc_sync_mappings(void);
+void vmalloc_sync_unmappings(void);
+
/*
* Lowlevel-APIs (not for driver use!)
*/
--- a/kernel/notifier.c
+++ b/kernel/notifier.c
@@ -552,7 +552,7 @@ NOKPROBE_SYMBOL(notify_die);
int register_die_notifier(struct notifier_block *nb)
{
- vmalloc_sync_all();
+ vmalloc_sync_mappings();
return atomic_notifier_chain_register(&die_chain, nb);
}
EXPORT_SYMBOL_GPL(register_die_notifier);
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -450,10 +450,14 @@ void vm_unmap_aliases(void)
EXPORT_SYMBOL_GPL(vm_unmap_aliases);
/*
- * Implement a stub for vmalloc_sync_all() if the architecture chose not to
- * have one.
+ * Implement a stub for vmalloc_sync_[un]mapping() if the architecture
+ * chose not to have one.
*/
-void __weak vmalloc_sync_all(void)
+void __weak vmalloc_sync_mappings(void)
+{
+}
+
+void __weak vmalloc_sync_unmappings(void)
{
}
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1769,7 +1769,7 @@ void *__vmalloc_node_range(unsigned long
* First make sure the mappings are removed from all page-tables
* before they are freed.
*/
- vmalloc_sync_all();
+ vmalloc_sync_unmappings();
/*
* In this function, newly allocated vm_struct has VM_UNINITIALIZED
@@ -2318,16 +2318,19 @@ int remap_vmalloc_range(struct vm_area_s
EXPORT_SYMBOL(remap_vmalloc_range);
/*
- * Implement a stub for vmalloc_sync_all() if the architecture chose not to
- * have one.
+ * Implement stubs for vmalloc_sync_[un]mappings () if the architecture chose
+ * not to have one.
*
* The purpose of this function is to make sure the vmalloc area
* mappings are identical in all page-tables in the system.
*/
-void __weak vmalloc_sync_all(void)
+void __weak vmalloc_sync_mappings(void)
{
}
+void __weak vmalloc_sync_unmappings(void)
+{
+}
static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data)
{
From: Cong Wang <[email protected]>
[ Upstream commit ef299cc3fa1a9e1288665a9fdc8bff55629fd359 ]
route4_change() allocates a new filter and copies values from
the old one. After the new filter is inserted into the hash
table, the old filter should be removed and freed, as the final
step of the update.
However, the current code mistakenly removes the new one. This
looks apparently wrong to me, and it causes double "free" and
use-after-free too, as reported by syzbot.
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Fixes: 1109c00547fc ("net: sched: RCU cls_route")
Cc: Jamal Hadi Salim <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: John Fastabend <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/cls_route.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/sched/cls_route.c
+++ b/net/sched/cls_route.c
@@ -539,8 +539,8 @@ static int route4_change(struct net *net
fp = &b->ht[h];
for (pfp = rtnl_dereference(*fp); pfp;
fp = &pfp->next, pfp = rtnl_dereference(*fp)) {
- if (pfp == f) {
- *fp = f->next;
+ if (pfp == fold) {
+ rcu_assign_pointer(*fp, fold->next);
break;
}
}
From: Taehee Yoo <[email protected]>
[ Upstream commit 173756b86803655d70af7732079b3aa935e6ab68 ]
hsr_get_node_{list/status}() are not under rtnl_lock() because
they are callback functions of generic netlink.
But they use __dev_get_by_index() without rtnl_lock().
So, it would use unsafe data.
In order to fix it, rcu_read_lock() and dev_get_by_index_rcu()
are used instead of __dev_get_by_index().
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_framereg.c | 10 ++--------
net/hsr/hsr_netlink.c | 43 +++++++++++++++++++++----------------------
2 files changed, 23 insertions(+), 30 deletions(-)
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -468,13 +468,9 @@ int hsr_get_node_data(struct hsr_priv *h
struct hsr_port *port;
unsigned long tdiff;
-
- rcu_read_lock();
node = find_node_by_AddrA(&hsr->node_db, addr);
- if (!node) {
- rcu_read_unlock();
- return -ENOENT; /* No such entry */
- }
+ if (!node)
+ return -ENOENT;
ether_addr_copy(addr_b, node->MacAddressB);
@@ -509,7 +505,5 @@ int hsr_get_node_data(struct hsr_priv *h
*addr_b_ifindex = -1;
}
- rcu_read_unlock();
-
return 0;
}
--- a/net/hsr/hsr_netlink.c
+++ b/net/hsr/hsr_netlink.c
@@ -259,17 +259,16 @@ static int hsr_get_node_status(struct sk
if (!na)
goto invalid;
- hsr_dev = __dev_get_by_index(genl_info_net(info),
- nla_get_u32(info->attrs[HSR_A_IFINDEX]));
+ rcu_read_lock();
+ hsr_dev = dev_get_by_index_rcu(genl_info_net(info),
+ nla_get_u32(info->attrs[HSR_A_IFINDEX]));
if (!hsr_dev)
- goto invalid;
+ goto rcu_unlock;
if (!is_hsr_master(hsr_dev))
- goto invalid;
-
+ goto rcu_unlock;
/* Send reply */
-
- skb_out = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ skb_out = genlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
if (!skb_out) {
res = -ENOMEM;
goto fail;
@@ -321,12 +320,10 @@ static int hsr_get_node_status(struct sk
res = nla_put_u16(skb_out, HSR_A_IF1_SEQ, hsr_node_if1_seq);
if (res < 0)
goto nla_put_failure;
- rcu_read_lock();
port = hsr_port_get_hsr(hsr, HSR_PT_SLAVE_A);
if (port)
res = nla_put_u32(skb_out, HSR_A_IF1_IFINDEX,
port->dev->ifindex);
- rcu_read_unlock();
if (res < 0)
goto nla_put_failure;
@@ -336,20 +333,22 @@ static int hsr_get_node_status(struct sk
res = nla_put_u16(skb_out, HSR_A_IF2_SEQ, hsr_node_if2_seq);
if (res < 0)
goto nla_put_failure;
- rcu_read_lock();
port = hsr_port_get_hsr(hsr, HSR_PT_SLAVE_B);
if (port)
res = nla_put_u32(skb_out, HSR_A_IF2_IFINDEX,
port->dev->ifindex);
- rcu_read_unlock();
if (res < 0)
goto nla_put_failure;
+ rcu_read_unlock();
+
genlmsg_end(skb_out, msg_head);
genlmsg_unicast(genl_info_net(info), skb_out, info->snd_portid);
return 0;
+rcu_unlock:
+ rcu_read_unlock();
invalid:
netlink_ack(skb_in, nlmsg_hdr(skb_in), -EINVAL, NULL);
return 0;
@@ -359,6 +358,7 @@ nla_put_failure:
/* Fall through */
fail:
+ rcu_read_unlock();
return res;
}
@@ -385,17 +385,16 @@ static int hsr_get_node_list(struct sk_b
if (!na)
goto invalid;
- hsr_dev = __dev_get_by_index(genl_info_net(info),
- nla_get_u32(info->attrs[HSR_A_IFINDEX]));
+ rcu_read_lock();
+ hsr_dev = dev_get_by_index_rcu(genl_info_net(info),
+ nla_get_u32(info->attrs[HSR_A_IFINDEX]));
if (!hsr_dev)
- goto invalid;
+ goto rcu_unlock;
if (!is_hsr_master(hsr_dev))
- goto invalid;
-
+ goto rcu_unlock;
/* Send reply */
-
- skb_out = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ skb_out = genlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
if (!skb_out) {
res = -ENOMEM;
goto fail;
@@ -415,14 +414,11 @@ static int hsr_get_node_list(struct sk_b
hsr = netdev_priv(hsr_dev);
- rcu_read_lock();
pos = hsr_get_next_node(hsr, NULL, addr);
while (pos) {
res = nla_put(skb_out, HSR_A_NODE_ADDR, ETH_ALEN, addr);
- if (res < 0) {
- rcu_read_unlock();
+ if (res < 0)
goto nla_put_failure;
- }
pos = hsr_get_next_node(hsr, pos, addr);
}
rcu_read_unlock();
@@ -432,6 +428,8 @@ static int hsr_get_node_list(struct sk_b
return 0;
+rcu_unlock:
+ rcu_read_unlock();
invalid:
netlink_ack(skb_in, nlmsg_hdr(skb_in), -EINVAL, NULL);
return 0;
@@ -441,6 +439,7 @@ nla_put_failure:
/* Fall through */
fail:
+ rcu_read_unlock();
return res;
}
From: Anthony Mallet <[email protected]>
[ Upstream commit 633e2b2ded739a34bd0fb1d8b5b871f7e489ea29 ]
close_delay and closing_wait are specified in hundredth of a second but stored
internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies()
functions to convert from each other.
Signed-off-by: Anthony Mallet <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/class/cdc-acm.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0453f0eb11781..74d0a91e84273 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -926,10 +926,10 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
memset(&tmp, 0, sizeof(tmp));
tmp.xmit_fifo_size = acm->writesize;
tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
- tmp.close_delay = acm->port.close_delay / 10;
+ tmp.close_delay = jiffies_to_msecs(acm->port.close_delay) / 10;
tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- acm->port.closing_wait / 10;
+ jiffies_to_msecs(acm->port.closing_wait) / 10;
if (copy_to_user(info, &tmp, sizeof(tmp)))
return -EFAULT;
@@ -947,9 +947,10 @@ static int set_serial_info(struct acm *acm,
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
return -EFAULT;
- close_delay = new_serial.close_delay * 10;
+ close_delay = msecs_to_jiffies(new_serial.close_delay * 10);
closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+ ASYNC_CLOSING_WAIT_NONE :
+ msecs_to_jiffies(new_serial.closing_wait * 10);
mutex_lock(&acm->port.mutex);
--
2.20.1
From: Cong Wang <[email protected]>
[ Upstream commit 0d1c3530e1bd38382edef72591b78e877e0edcd3 ]
In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex")
I moved cp->hash calculation before the first
tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched.
This difference could lead to another out of bound access.
cp->alloc_hash should always be the size allocated, we should
update it after this tcindex_alloc_perfect_hash().
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Fixes: 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex")
Cc: Jamal Hadi Salim <[email protected]>
Cc: Jiri Pirko <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/cls_tcindex.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -375,6 +375,7 @@ tcindex_set_parms(struct net *net, struc
if (tcindex_alloc_perfect_hash(cp) < 0)
goto errout;
+ cp->alloc_hash = cp->hash;
for (i = 0; i < min(cp->hash, p->hash); i++)
cp->perfect[i].res = p->perfect[i].res;
balloc = 1;
From: Anthony Mallet <[email protected]>
[ Upstream commit b401f8c4f492cbf74f3f59c9141e5be3071071bb ]
By default, tty_port_init() initializes those parameters to a multiple
of HZ. For instance in line 69 of tty_port.c:
port->close_delay = (50 * HZ) / 100;
https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69
With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04
linux-image-4.15.0-37-generic), the default setting for close_delay is
thus 125.
When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in
user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then
executed with the same setting '12', the value is interpreted as '120'
which is different from the current setting and a EPERM error may be
raised by set_serial_info() if !CAP_SYS_ADMIN.
https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919
Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Signed-off-by: Anthony Mallet <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/class/cdc-acm.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 74d0a91e84273..30a124b74d459 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -942,6 +942,7 @@ static int set_serial_info(struct acm *acm,
{
struct serial_struct new_serial;
unsigned int closing_wait, close_delay;
+ unsigned int old_closing_wait, old_close_delay;
int retval = 0;
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
@@ -952,18 +953,24 @@ static int set_serial_info(struct acm *acm,
ASYNC_CLOSING_WAIT_NONE :
msecs_to_jiffies(new_serial.closing_wait * 10);
+ /* we must redo the rounding here, so that the values match */
+ old_close_delay = jiffies_to_msecs(acm->port.close_delay) / 10;
+ old_closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ ASYNC_CLOSING_WAIT_NONE :
+ jiffies_to_msecs(acm->port.closing_wait) / 10;
+
mutex_lock(&acm->port.mutex);
- if (!capable(CAP_SYS_ADMIN)) {
- if ((close_delay != acm->port.close_delay) ||
- (closing_wait != acm->port.closing_wait))
+ if ((new_serial.close_delay != old_close_delay) ||
+ (new_serial.closing_wait != old_closing_wait)) {
+ if (!capable(CAP_SYS_ADMIN))
retval = -EPERM;
- else
- retval = -EOPNOTSUPP;
- } else {
- acm->port.close_delay = close_delay;
- acm->port.closing_wait = closing_wait;
- }
+ else {
+ acm->port.close_delay = close_delay;
+ acm->port.closing_wait = closing_wait;
+ }
+ } else
+ retval = -EOPNOTSUPP;
mutex_unlock(&acm->port.mutex);
return retval;
--
2.20.1
From: Alexander Shishkin <[email protected]>
commit add492d2e9446a77ede9bb43699ec85ca8fc1aba upstream.
This adds support for the Trace Hub in Elkhart Lake CPU.
Signed-off-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/pci.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -219,6 +219,11 @@ static const struct pci_device_id intel_
.driver_data = (kernel_ulong_t)&intel_th_2x,
},
{
+ /* Elkhart Lake CPU */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4529),
+ .driver_data = (kernel_ulong_t)&intel_th_2x,
+ },
+ {
/* Elkhart Lake */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4b26),
.driver_data = (kernel_ulong_t)&intel_th_2x,
From: Vasily Averin <[email protected]>
[ Upstream commit db8dd9697238be70a6b4f9d0284cd89f59c0e070 ]
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
# mount | grep cgroup
# dd if=/mnt/cgroup.procs bs=1 # normal output
...
1294
1295
1296
1304
1382
584+0 records in
584+0 records out
584 bytes copied
dd: /mnt/cgroup.procs: cannot skip to specified offset
83 <<< generates end of last line
1383 <<< ... and whole last line once again
0+1 records in
0+1 records out
8 bytes copied
dd: /mnt/cgroup.procs: cannot skip to specified offset
1386 <<< generates last line anyway
0+1 records in
0+1 records out
5 bytes copied
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cgroup/cgroup-v1.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c
index a2c05d2476ac5..d148965180893 100644
--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -501,6 +501,7 @@ static void *cgroup_pidlist_next(struct seq_file *s, void *v, loff_t *pos)
*/
p++;
if (p >= end) {
+ (*pos)++;
return NULL;
} else {
*pos = *p;
--
2.20.1
From: Edwin Peer <[email protected]>
[ Upstream commit 62d4073e86e62e316bea2c53e77db10418fd5dd7 ]
The allocated ieee_ets structure goes out of scope without being freed,
leaking memory. Appropriate result codes should be returned so that
callers do not rely on invalid data passed by reference.
Also cache the ETS config retrieved from the device so that it doesn't
need to be freed. The balance of the code was clearly written with the
intent of having the results of querying the hardware cached in the
device structure. The commensurate store was evidently missed though.
Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c
@@ -387,24 +387,26 @@ static int bnxt_dcbnl_ieee_getets(struct
{
struct bnxt *bp = netdev_priv(dev);
struct ieee_ets *my_ets = bp->ieee_ets;
+ int rc;
ets->ets_cap = bp->max_tc;
if (!my_ets) {
- int rc;
-
if (bp->dcbx_cap & DCB_CAP_DCBX_HOST)
return 0;
my_ets = kzalloc(sizeof(*my_ets), GFP_KERNEL);
if (!my_ets)
- return 0;
+ return -ENOMEM;
rc = bnxt_hwrm_queue_cos2bw_qcfg(bp, my_ets);
if (rc)
- return 0;
+ goto error;
rc = bnxt_hwrm_queue_pri2cos_qcfg(bp, my_ets);
if (rc)
- return 0;
+ goto error;
+
+ /* cache result */
+ bp->ieee_ets = my_ets;
}
ets->cbs = my_ets->cbs;
@@ -413,6 +415,9 @@ static int bnxt_dcbnl_ieee_getets(struct
memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa));
memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc));
return 0;
+error:
+ kfree(my_ets);
+ return rc;
}
static int bnxt_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets)
From: Mark Rutland <[email protected]>
commit 76fc52bd07d3e9cb708f1a50b60c825c96acd606 upstream.
The SPSR_ELx format for exceptions taken from AArch32 is slightly
different to the AArch32 PSR format.
Map between the two in the compat ptrace code.
Signed-off-by: Mark Rutland <[email protected]>
Fixes: 7206dc93a58fb764 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <[email protected]>
Cc: Suzuki Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/ptrace.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -833,6 +833,7 @@ static int compat_gpr_get(struct task_st
break;
case 16:
reg = task_pt_regs(target)->pstate;
+ reg = pstate_to_compat_psr(reg);
break;
case 17:
reg = task_pt_regs(target)->orig_x0;
@@ -900,6 +901,7 @@ static int compat_gpr_set(struct task_st
newregs.pc = reg;
break;
case 16:
+ reg = compat_psr_to_pstate(reg);
newregs.pstate = reg;
break;
case 17:
From: Taehee Yoo <[email protected]>
[ Upstream commit 384d91c267e621e0926062cfb3f20cb72dc16928 ]
gro_cells_init() returns error if memory allocation is failed.
But the vxlan module doesn't check the return value of gro_cells_init().
Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")`
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vxlan.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2454,10 +2454,19 @@ static void vxlan_vs_add_dev(struct vxla
/* Setup stats when device is created */
static int vxlan_init(struct net_device *dev)
{
+ struct vxlan_dev *vxlan = netdev_priv(dev);
+ int err;
+
dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!dev->tstats)
return -ENOMEM;
+ err = gro_cells_init(&vxlan->gro_cells, dev);
+ if (err) {
+ free_percpu(dev->tstats);
+ return err;
+ }
+
return 0;
}
@@ -2717,8 +2726,6 @@ static void vxlan_setup(struct net_devic
vxlan->dev = dev;
- gro_cells_init(&vxlan->gro_cells, dev);
-
for (h = 0; h < FDB_HASH_SIZE; ++h)
INIT_HLIST_HEAD(&vxlan->fdb_head[h]);
}
From: Yussuf Khalil <[email protected]>
commit 1369d0abe469fb4cdea8a5bce219d38cb857a658 upstream.
This laptop (and perhaps other variants of the same model) reports an
SMBus-capable Synaptics touchpad. Everything (including suspend and
resume) works fine when RMI is enabled via the kernel command line, so
let's add it to the whitelist.
Signed-off-by: Yussuf Khalil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/synaptics.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -189,6 +189,7 @@ static const char * const smbus_pnp_ids[
"SYN3052", /* HP EliteBook 840 G4 */
"SYN3221", /* HP 15-ay000 */
"SYN323d", /* HP Spectre X360 13-w013dx */
+ "SYN3257", /* HP Envy 13-ad105ng */
NULL
};
From: Roger Quadros <[email protected]>
commit cfb5d65f25959f724081bae8445a0241db606af6 upstream.
The L3 interconnect's memory map is from 0x0 to
0xffffffff. Out of this, System memory (SDRAM) can be
accessed from 0x80000000 to 0xffffffff (2GB)
DRA7 does support 4GB of SDRAM but upper 2GB can only be
accessed by the MPU subsystem.
Add the dma-ranges property to reflect the physical address limit
of the L3 bus.
Issues ere observed only with SATA on DRA7-EVM with 4GB RAM
and CONFIG_ARM_LPAE enabled. This is because the controller
supports 64-bit DMA and its driver sets the dma_mask to 64-bit
thus resulting in DMA accesses beyond L3 limit of 2G.
Setting the correct bus_dma_limit fixes the issue.
Signed-off-by: Roger Quadros <[email protected]>
Cc: [email protected]
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/dra7.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -137,6 +137,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x0 0x44000000 0x0 0x1000000>,
<0x0 0x45000000 0x0 0x1000>;
From: Roger Quadros <[email protected]>
commit dfa7ea303f56a3a8b1ed3b91ef35af2da67ca4ee upstream.
The L3 interconnect's memory map is from 0x0 to
0xffffffff. Out of this, System memory (SDRAM) can be
accessed from 0x80000000 to 0xffffffff (2GB)
OMAP5 does support 4GB of SDRAM but upper 2GB can only be
accessed by the MPU subsystem.
Add the dma-ranges property to reflect the physical address limit
of the L3 bus.
Cc: [email protected]
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/omap5.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -131,6 +131,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
reg = <0 0x44000000 0 0x2000>,
<0 0x44800000 0 0x3000>,
From: Sabrina Dubroca <[email protected]>
[ Upstream commit 28d35bcdd3925e7293408cdb8aa5f2aac5f0d6e3 ]
When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is
received, we must clamp its value. However, we can receive a PMTU
exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an
increase in PMTU.
To fix this, take the smallest of the old MTU and ip_rt_min_pmtu.
Before this patch, in case of an update, the exception's MTU would
always change. Now, an exception can have only its lock flag updated,
but not the MTU, so we need to add a check on locking to the following
"is this exception getting updated, or close to expiring?" test.
Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu")
Signed-off-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/route.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 8b855d3eec9e7..05fe1d0075444 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1014,21 +1014,22 @@ out: kfree_skb(skb);
static void __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu)
{
struct dst_entry *dst = &rt->dst;
+ u32 old_mtu = ipv4_mtu(dst);
struct fib_result res;
bool lock = false;
if (ip_mtu_locked(dst))
return;
- if (ipv4_mtu(dst) < mtu)
+ if (old_mtu < mtu)
return;
if (mtu < ip_rt_min_pmtu) {
lock = true;
- mtu = ip_rt_min_pmtu;
+ mtu = min(old_mtu, ip_rt_min_pmtu);
}
- if (rt->rt_pmtu == mtu &&
+ if (rt->rt_pmtu == mtu && !lock &&
time_before(jiffies, dst->expires - ip_rt_mtu_expires / 2))
return;
--
2.20.1
From: Tycho Andersen <[email protected]>
[ Upstream commit 2e5383d7904e60529136727e49629a82058a5607 ]
Older (and maybe current) versions of systemd set release_agent to "" when
shutting down, but do not set notify_on_release to 0.
Since 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate
call_usermodehelper()"), we filter out such calls when the user mode helper
path is "". However, when used in conjunction with an actual (i.e. non "")
STATIC_USERMODEHELPER, the path is never "", so the real usermode helper
will be called with argv[0] == "".
Let's avoid this by not invoking the release_agent when it is "".
Signed-off-by: Tycho Andersen <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cgroup/cgroup-v1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c
index d148965180893..545f29c5268d7 100644
--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -824,7 +824,7 @@ void cgroup1_release_agent(struct work_struct *work)
pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
agentbuf = kstrdup(cgrp->root->release_agent_path, GFP_KERNEL);
- if (!pathbuf || !agentbuf)
+ if (!pathbuf || !agentbuf || !strlen(agentbuf))
goto out;
spin_lock_irq(&css_set_lock);
--
2.20.1
From: Dajun Jin <[email protected]>
[ Upstream commit 209c65b61d94344522c41a83cd6ce51aac5fd0a4 ]
When registers a phy_device successful, should terminate the loop
or the phy_device would be registered in other addr. If there are
multiple PHYs without reg properties, it will go wrong.
Signed-off-by: Dajun Jin <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/of_mdio.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index fe26697d3bd72..69da2f6896dae 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -259,6 +259,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
rc = of_mdiobus_register_phy(mdio, child, addr);
if (rc && rc != -ENODEV)
goto unregister;
+ break;
}
}
}
--
2.20.1
From: Eugene Syromiatnikov <[email protected]>
commit 52afa505a03d914081f40cb869a3248567a57573 upstream.
The commit 19ba1eb15a2a ("Input: psmouse - add a custom serio protocol
to send extra information") introduced usage of the BIT() macro
for SERIO_* flags; this macro is not provided in UAPI headers.
Replace if with similarly defined _BITUL() macro defined
in <linux/const.h>.
Fixes: 19ba1eb15a2a ("Input: psmouse - add a custom serio protocol to send extra information")
Signed-off-by: Eugene Syromiatnikov <[email protected]>
Cc: <[email protected]> # v5.0+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/serio.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/include/uapi/linux/serio.h
+++ b/include/uapi/linux/serio.h
@@ -9,7 +9,7 @@
#ifndef _UAPI_SERIO_H
#define _UAPI_SERIO_H
-
+#include <linux/const.h>
#include <linux/ioctl.h>
#define SPIOCSTYPE _IOW('q', 0x01, unsigned long)
@@ -18,10 +18,10 @@
/*
* bit masks for use in "interrupt" flags (3rd argument)
*/
-#define SERIO_TIMEOUT BIT(0)
-#define SERIO_PARITY BIT(1)
-#define SERIO_FRAME BIT(2)
-#define SERIO_OOB_DATA BIT(3)
+#define SERIO_TIMEOUT _BITUL(0)
+#define SERIO_PARITY _BITUL(1)
+#define SERIO_FRAME _BITUL(2)
+#define SERIO_OOB_DATA _BITUL(3)
/*
* Serio types
From: Linus Torvalds <[email protected]>
commit 5076190daded2197f62fe92cf69674488be44175 upstream.
This is just a cleanup addition to Jann's fix to properly update the
transaction ID for the slub slowpath in commit fd4d9c7d0c71 ("mm: slub:
add missing TID bump..").
The transaction ID is what protects us against any concurrent accesses,
but we should really also make sure to make the 'freelist' comparison
itself always use the same freelist value that we then used as the new
next free pointer.
Jann points out that if we do all of this carefully, we could skip the
transaction ID update for all the paths that only remove entries from
the lists, and only update the TID when adding entries (to avoid the ABA
issue with cmpxchg and list handling re-adding a previously seen value).
But this patch just does the "make sure to cmpxchg the same value we
used" rather than then try to be clever.
Acked-by: Jann Horn <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slub.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2943,11 +2943,13 @@ redo:
barrier();
if (likely(page == c->page)) {
- set_freepointer(s, tail_obj, c->freelist);
+ void **freelist = READ_ONCE(c->freelist);
+
+ set_freepointer(s, tail_obj, freelist);
if (unlikely(!this_cpu_cmpxchg_double(
s->cpu_slab->freelist, s->cpu_slab->tid,
- c->freelist, tid,
+ freelist, tid,
head, next_tid(tid)))) {
note_cmpxchg_failure("slab_free", s, tid);
From: Dirk Mueller <[email protected]>
commit e33a814e772cdc36436c8c188d8c42d019fda639 upstream.
gcc 10 will default to -fno-common, which causes this error at link
time:
(.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
This is because both dtc-lexer as well as dtc-parser define the same
global symbol yyloc. Before with -fcommon those were merged into one
defintion. The proper solution would be to to mark this as "extern",
however that leads to:
dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
26 | extern YYLTYPE yylloc;
| ^~~~~~
In file included from dtc-lexer.l:24:
dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
127 | extern YYLTYPE yylloc;
| ^~~~~~
cc1: all warnings being treated as errors
which means the declaration is completely redundant and can just be
dropped.
Signed-off-by: Dirk Mueller <[email protected]>
Signed-off-by: David Gibson <[email protected]>
[robh: cherry-pick from upstream]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/dtc/dtc-lexer.l | 1 -
1 file changed, 1 deletion(-)
--- a/scripts/dtc/dtc-lexer.l
+++ b/scripts/dtc/dtc-lexer.l
@@ -38,7 +38,6 @@ LINECOMMENT "//".*\n
#include "srcpos.h"
#include "dtc-parser.tab.h"
-YYLTYPE yylloc;
extern bool treesource_error;
/* CAUTION: this will stop working if we ever use yyless() or yyunput() */
From: Johannes Berg <[email protected]>
commit b16798f5b907733966fd1a558fca823b3c67e4a1 upstream.
If a station is still marked as authorized, mark it as no longer
so before removing its keys. This allows frames transmitted to it
to be rejected, providing additional protection against leaking
plain text data during the disconnection flow.
Cc: [email protected]
Link: https://lore.kernel.org/r/20200326155133.ccb4fb0bb356.If48f0f0504efdcf16b8921f48c6d3bb2cb763c99@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/sta_info.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -3,6 +3,7 @@
* Copyright 2006-2007 Jiri Benc <[email protected]>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2015 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018-2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -951,6 +952,11 @@ static void __sta_info_destroy_part2(str
might_sleep();
lockdep_assert_held(&local->sta_mtx);
+ while (sta->sta_state == IEEE80211_STA_AUTHORIZED) {
+ ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+ WARN_ON_ONCE(ret);
+ }
+
/* now keys can no longer be reached */
ieee80211_free_sta_keys(local, sta);
From: Qian Cai <[email protected]>
commit d72520ad004a8ce18a6ba6cde317f0081b27365a upstream.
Commit bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped
out") supported writing THP to a swap device but forgot to upgrade an
older commit df8c94d13c7e ("page-flags: define behavior of FS/IO-related
flags on compound pages") which could trigger a crash during THP
swapping out with DEBUG_VM_PGFLAGS=y,
kernel BUG at include/linux/page-flags.h:317!
page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
page:fffff3b2ec3a8000 refcount:512 mapcount:0 mapping:000000009eb0338c index:0x7f6e58200 head:fffff3b2ec3a8000 order:9 compound_mapcount:0 compound_pincount:0
anon flags: 0x45fffe0000d8454(uptodate|lru|workingset|owner_priv_1|writeback|head|reclaim|swapbacked)
end_swap_bio_write()
SetPageError(page)
VM_BUG_ON_PAGE(1 && PageCompound(page))
<IRQ>
bio_endio+0x297/0x560
dec_pending+0x218/0x430 [dm_mod]
clone_endio+0xe4/0x2c0 [dm_mod]
bio_endio+0x297/0x560
blk_update_request+0x201/0x920
scsi_end_request+0x6b/0x4b0
scsi_io_completion+0x509/0x7e0
scsi_finish_command+0x1ed/0x2a0
scsi_softirq_done+0x1c9/0x1d0
__blk_mqnterrupt+0xf/0x20
</IRQ>
Fix by checking PF_NO_TAIL in those places instead.
Fixes: bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out")
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Acked-by: "Huang, Ying" <[email protected]>
Acked-by: Rafael Aquini <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/page-flags.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -264,7 +264,7 @@ static inline int TestClearPage##uname(s
__PAGEFLAG(Locked, locked, PF_NO_TAIL)
PAGEFLAG(Waiters, waiters, PF_ONLY_HEAD) __CLEARPAGEFLAG(Waiters, waiters, PF_ONLY_HEAD)
-PAGEFLAG(Error, error, PF_NO_COMPOUND) TESTCLEARFLAG(Error, error, PF_NO_COMPOUND)
+PAGEFLAG(Error, error, PF_NO_TAIL) TESTCLEARFLAG(Error, error, PF_NO_TAIL)
PAGEFLAG(Referenced, referenced, PF_HEAD)
TESTCLEARFLAG(Referenced, referenced, PF_HEAD)
__SETPAGEFLAG(Referenced, referenced, PF_HEAD)
From: Mike Marciniszyn <[email protected]>
commit 2d47fbacf2725a67869f4d3634c2415e7dfab2f4 upstream.
The following modify sequence (loosely based on ipoib) will lose a pkey
modifcation:
- Modify (pkey index, port)
- Modify (new pkey index, NO port)
After the first modify, the qp_pps list will have saved the pkey and the
unit on the main list.
During the second modify, get_new_pps() will fetch the port from qp_pps
and read the new pkey index from qp_attr->pkey_index. The state will
still be zero, or IB_PORT_PKEY_NOT_VALID. Because of the invalid state,
the new values will never replace the one in the qp pps list, losing the
new pkey.
This happens because the following if statements will never correct the
state because the first term will be false. If the code had been executed,
it would incorrectly overwrite valid values.
if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT))
new_pps->main.state = IB_PORT_PKEY_VALID;
if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) {
new_pps->main.port_num = qp_pps->main.port_num;
new_pps->main.pkey_index = qp_pps->main.pkey_index;
if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID)
new_pps->main.state = IB_PORT_PKEY_VALID;
}
Fix by joining the two if statements with an or test to see if qp_pps is
non-NULL and in the correct state.
Fixes: 1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kaike Wan <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/security.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
--- a/drivers/infiniband/core/security.c
+++ b/drivers/infiniband/core/security.c
@@ -348,16 +348,11 @@ static struct ib_ports_pkeys *get_new_pp
else if (qp_pps)
new_pps->main.pkey_index = qp_pps->main.pkey_index;
- if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT))
+ if (((qp_attr_mask & IB_QP_PKEY_INDEX) &&
+ (qp_attr_mask & IB_QP_PORT)) ||
+ (qp_pps && qp_pps->main.state != IB_PORT_PKEY_NOT_VALID))
new_pps->main.state = IB_PORT_PKEY_VALID;
- if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) {
- new_pps->main.port_num = qp_pps->main.port_num;
- new_pps->main.pkey_index = qp_pps->main.pkey_index;
- if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID)
- new_pps->main.state = IB_PORT_PKEY_VALID;
- }
-
if (qp_attr_mask & IB_QP_ALT_PATH) {
new_pps->alt.port_num = qp_attr->alt_port_num;
new_pps->alt.pkey_index = qp_attr->alt_pkey_index;
From: Masami Hiramatsu <[email protected]>
commit be40920fbf1003c38ccdc02b571e01a75d890c82 upstream.
When I tried to compile tools/perf from the top directory with the -C
option, the O= option didn't work correctly if I passed a relative path:
$ make O=BUILD -C tools/perf/
make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop.
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf'
The O= directory existence check failed because the check script ran in
the build target directory instead of the directory where I ran the make
command.
To fix that, once change directory to $(PWD) and check O= directory,
since the PWD is set to where the make command runs.
Fixes: c883122acc0d ("perf tools: Let O= makes handle relative paths")
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/Makefile | 2 +-
tools/scripts/Makefile.include | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -35,7 +35,7 @@ endif
# Only pass canonical directory names as the output directory:
#
ifneq ($(O),)
- FULL_O := $(shell readlink -f $(O) || echo $(O))
+ FULL_O := $(shell cd $(PWD); readlink -f $(O) || echo $(O))
endif
#
--- a/tools/scripts/Makefile.include
+++ b/tools/scripts/Makefile.include
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
ifneq ($(O),)
ifeq ($(origin O), command line)
- dummy := $(if $(shell test -d $(O) || echo $(O)),$(error O=$(O) does not exist),)
- ABSOLUTE_O := $(shell cd $(O) ; pwd)
+ dummy := $(if $(shell cd $(PWD); test -d $(O) || echo $(O)),$(error O=$(O) does not exist),)
+ ABSOLUTE_O := $(shell cd $(PWD); cd $(O) ; pwd)
OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/)
COMMAND_O := O=$(ABSOLUTE_O)
ifeq ($(objtree),)
From: Chuhong Yuan <[email protected]>
commit e1b9f99ff8c40bba6e59de9ad4a659447b1e4112 upstream.
The driver forgets to disable and unprepare clk when remove.
Add a call to clk_disable_unprepare to fix it.
Signed-off-by: Chuhong Yuan <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-hix5hd2.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -498,6 +498,7 @@ static int hix5hd2_i2c_remove(struct pla
i2c_del_adapter(&priv->adap);
pm_runtime_disable(priv->dev);
pm_runtime_set_suspended(priv->dev);
+ clk_disable_unprepare(priv->clk);
return 0;
}
From: Nicolas Dichtel <[email protected]>
commit f1ed10264ed6b66b9cd5e8461cffce69be482356 upstream.
I forgot the 4in6/6in4 cases in my previous patch. Let's fix them.
Fixes: 95224166a903 ("vti[6]: fix packet tx through bpf_redirect()")
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/Kconfig | 1 +
net/ipv4/ip_vti.c | 36 +++++++++++++++++++++++++++++-------
net/ipv6/ip6_vti.c | 32 +++++++++++++++++++++++++-------
3 files changed, 55 insertions(+), 14 deletions(-)
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -297,6 +297,7 @@ config SYN_COOKIES
config NET_IPVTI
tristate "Virtual (secure) IP: tunneling"
+ depends on IPV6 || IPV6=n
select INET_TUNNEL
select NET_IP_TUNNEL
depends on INET_XFRM_MODE_TUNNEL
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -208,17 +208,39 @@ static netdev_tx_t vti_xmit(struct sk_bu
int mtu;
if (!dst) {
- struct rtable *rt;
+ switch (skb->protocol) {
+ case htons(ETH_P_IP): {
+ struct rtable *rt;
- fl->u.ip4.flowi4_oif = dev->ifindex;
- fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
- rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
- if (IS_ERR(rt)) {
+ fl->u.ip4.flowi4_oif = dev->ifindex;
+ fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+ rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+ if (IS_ERR(rt)) {
+ dev->stats.tx_carrier_errors++;
+ goto tx_error_icmp;
+ }
+ dst = &rt->dst;
+ skb_dst_set(skb, dst);
+ break;
+ }
+#if IS_ENABLED(CONFIG_IPV6)
+ case htons(ETH_P_IPV6):
+ fl->u.ip6.flowi6_oif = dev->ifindex;
+ fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+ dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+ if (dst->error) {
+ dst_release(dst);
+ dst = NULL;
+ dev->stats.tx_carrier_errors++;
+ goto tx_error_icmp;
+ }
+ skb_dst_set(skb, dst);
+ break;
+#endif
+ default:
dev->stats.tx_carrier_errors++;
goto tx_error_icmp;
}
- dst = &rt->dst;
- skb_dst_set(skb, dst);
}
dst_hold(dst);
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -454,15 +454,33 @@ vti6_xmit(struct sk_buff *skb, struct ne
int mtu;
if (!dst) {
- fl->u.ip6.flowi6_oif = dev->ifindex;
- fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
- dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
- if (dst->error) {
- dst_release(dst);
- dst = NULL;
+ switch (skb->protocol) {
+ case htons(ETH_P_IP): {
+ struct rtable *rt;
+
+ fl->u.ip4.flowi4_oif = dev->ifindex;
+ fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+ rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+ if (IS_ERR(rt))
+ goto tx_err_link_failure;
+ dst = &rt->dst;
+ skb_dst_set(skb, dst);
+ break;
+ }
+ case htons(ETH_P_IPV6):
+ fl->u.ip6.flowi6_oif = dev->ifindex;
+ fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+ dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+ if (dst->error) {
+ dst_release(dst);
+ dst = NULL;
+ goto tx_err_link_failure;
+ }
+ skb_dst_set(skb, dst);
+ break;
+ default:
goto tx_err_link_failure;
}
- skb_dst_set(skb, dst);
}
dst_hold(dst);
From: Madalin Bucur <[email protected]>
[ Upstream commit 26d5bb9e4c4b541c475751e015072eb2cbf70d15 ]
FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak; thus stopping further packet processing.
The FMAN internal queue can overflow when FMAN splits single
read or write transactions into multiple smaller transactions
such that more than 17 AXI transactions are in flight from FMAN
to interconnect. When the FMAN internal queue overflows, it can
stall further packet processing. The issue can occur with any one
of the following three conditions:
1. FMAN AXI transaction crosses 4K address boundary (Errata
A010022)
2. FMAN DMA address for an AXI transaction is not 16 byte
aligned, i.e. the last 4 bits of an address are non-zero
3. Scatter Gather (SG) frames have more than one SG buffer in
the SG list and any one of the buffers, except the last
buffer in the SG list has data size that is not a multiple
of 16 bytes, i.e., other than 16, 32, 48, 64, etc.
With any one of the above three conditions present, there is
likelihood of stalled FMAN packet processing, especially under
stress with multiple ports injecting line-rate traffic.
To avoid situations that stall FMAN packet processing, all of the
above three conditions must be avoided; therefore, configure the
system with the following rules:
1. Frame buffers must not span a 4KB address boundary, unless
the frame start address is 256 byte aligned
2. All FMAN DMA start addresses (for example, BMAN buffer
address, FD[address] + FD[offset]) are 16B aligned
3. SG table and buffer addresses are 16B aligned and the size
of SG buffers are multiple of 16 bytes, except for the last
SG buffer that can be of any size.
Additional workaround notes:
- Address alignment of 64 bytes is recommended for maximally
efficient system bus transactions (although 16 byte alignment is
sufficient to avoid the stall condition)
- To support frame sizes that are larger than 4K bytes, there are
two options:
1. Large single buffer frames that span a 4KB page boundary can
be converted into SG frames to avoid transaction splits at
the 4KB boundary,
2. Align the large single buffer to 256B address boundaries,
ensure that the frame address plus offset is 256B aligned.
- If software generated SG frames have buffers that are unaligned
and with random non-multiple of 16 byte lengths, before
transmitting such frames via FMAN, frames will need to be copied
into a new single buffer or multiple buffer SG frame that is
compliant with the three rules listed above.
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/devicetree/bindings/net/fsl-fman.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
index df873d1f3b7c5..2aaae210317bb 100644
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -110,6 +110,13 @@ PROPERTIES
Usage: required
Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
+- fsl,erratum-a050385
+ Usage: optional
+ Value type: boolean
+ Definition: A boolean property. Indicates the presence of the
+ erratum A050385 which indicates that DMA transactions that are
+ split can result in a FMan lock.
+
=============================================================================
FMan MURAM Node
--
2.20.1
From: Masami Hiramatsu <[email protected]>
commit 1efde2754275dbd9d11c6e0132a4f09facf297ab upstream.
Do not depend on dwfl_module_addrsym() because it can fail on user-space
shared libraries.
Actually, same bug was fixed by commit 664fee3dc379 ("perf probe: Do not
use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit
07d369857808 ("perf probe: Fix wrong address verification) reverted to
get actual symbol address from symtab.
This fixes it again by getting symbol address from DIE, and only if the
DIE has only address range, it uses dwfl_module_addrsym().
Fixes: 07d369857808 ("perf probe: Fix wrong address verification)
Reported-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Link: http://lore.kernel.org/lkml/158281812176.476.14164573830975116234.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/probe-finder.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -626,14 +626,19 @@ static int convert_to_trace_point(Dwarf_
return -EINVAL;
}
- /* Try to get actual symbol name from symtab */
- symbol = dwfl_module_addrsym(mod, paddr, &sym, NULL);
+ if (dwarf_entrypc(sp_die, &eaddr) == 0) {
+ /* If the DIE has entrypc, use it. */
+ symbol = dwarf_diename(sp_die);
+ } else {
+ /* Try to get actual symbol name and address from symtab */
+ symbol = dwfl_module_addrsym(mod, paddr, &sym, NULL);
+ eaddr = sym.st_value;
+ }
if (!symbol) {
pr_warning("Failed to find symbol at 0x%lx\n",
(unsigned long)paddr);
return -ENOENT;
}
- eaddr = sym.st_value;
tp->offset = (unsigned long)(paddr - eaddr);
tp->address = (unsigned long)paddr;
From: Maor Gottlieb <[email protected]>
commit ba80013fba656b9830ef45cd40a6a1e44707f47a upstream.
It has been discovered that this feature can globally block the RX port,
so it should be allowed for highly privileged users only.
Fixes: 03404e8ae652("IB/mlx5: Add support to dropless RQ")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx5/qp.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -4896,6 +4896,10 @@ struct ib_wq *mlx5_ib_create_wq(struct i
if (udata->outlen && udata->outlen < min_resp_len)
return ERR_PTR(-EINVAL);
+ if (!capable(CAP_SYS_RAWIO) &&
+ init_attr->create_flags & IB_WQ_FLAGS_DELAY_DROP)
+ return ERR_PTR(-EPERM);
+
dev = to_mdev(pd->device);
switch (init_attr->wq_type) {
case IB_WQT_RQ:
From: Pablo Neira Ayuso <[email protected]>
commit 76a109fac206e158eb3c967af98c178cff738e6a upstream.
Make sure the forward action is only used from ingress.
Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nft_fwd_netdev.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/net/netfilter/nft_fwd_netdev.c
+++ b/net/netfilter/nft_fwd_netdev.c
@@ -62,6 +62,13 @@ nla_put_failure:
return -1;
}
+static int nft_fwd_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_chain_validate_hooks(ctx->chain, (1 << NF_NETDEV_INGRESS));
+}
+
static struct nft_expr_type nft_fwd_netdev_type;
static const struct nft_expr_ops nft_fwd_netdev_ops = {
.type = &nft_fwd_netdev_type,
@@ -69,6 +76,7 @@ static const struct nft_expr_ops nft_fwd
.eval = nft_fwd_netdev_eval,
.init = nft_fwd_netdev_init,
.dump = nft_fwd_netdev_dump,
+ .validate = nft_fwd_validate,
};
static struct nft_expr_type nft_fwd_netdev_type __read_mostly = {
From: Martin K. Petersen <[email protected]>
commit ea697a8bf5a4161e59806fab14f6e4a46dc7dcb0 upstream.
Some USB bridge devices will return a default set of characteristics during
initialization. And then, once an attached drive has spun up, substitute
the actual parameters reported by the drive. According to the SCSI spec,
the device should return a UNIT ATTENTION in case any reported parameters
change. But in this case the change is made silently after a small window
where default values are reported.
Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of
physical block size") validated the reported optimal I/O size against the
physical block size to overcome problems with devices reporting nonsensical
transfer sizes. However, this validation did not account for the fact that
aforementioned devices will return default values during a brief window
during spin-up. The subsequent change in reported characteristics would
invalidate the checking that had previously been performed.
Unset a previously configured optimal I/O size should the sanity checking
fail on subsequent revalidate attempts.
Link: https://lore.kernel.org/r/[email protected]
Cc: Bryan Gurney <[email protected]>
Cc: <[email protected]>
Reported-by: Bernhard Sulzer <[email protected]>
Tested-by: Bernhard Sulzer <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sd.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3212,9 +3212,11 @@ static int sd_revalidate_disk(struct gen
if (sd_validate_opt_xfer_size(sdkp, dev_max)) {
q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
- } else
+ } else {
+ q->limits.io_opt = 0;
rw_max = min_not_zero(logical_to_sectors(sdp, dev_max),
(sector_t)BLK_DEF_MAX_SECTORS);
+ }
/* Do not exceed controller limit */
rw_max = min(rw_max, queue_max_hw_sectors(q));
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit 6cad4e269e25dddd7260a53e9d9d90ba3a3cc35a ]
Return statements in functions returning bool should use true or false
instead of an integer value.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 4f1d3fd5d4121..172f66e9da2d1 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -466,7 +466,7 @@ static bool raydium_i2c_boot_trigger(struct i2c_client *client)
}
}
- return 0;
+ return false;
}
static bool raydium_i2c_fw_trigger(struct i2c_client *client)
@@ -492,7 +492,7 @@ static bool raydium_i2c_fw_trigger(struct i2c_client *client)
}
}
- return 0;
+ return false;
}
static int raydium_i2c_check_path(struct i2c_client *client)
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 32cf3a610c35cb21e3157f4bbf29d89960e30a36 ]
These functions are supposed to return negative error codes but instead
it returns true on failure and false on success. The error codes are
eventually propagated back to user space.
Fixes: 48a2b783483b ("Input: add Raydium I2C touchscreen driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 172f66e9da2d1..7da44956555e5 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -441,7 +441,7 @@ static int raydium_i2c_write_object(struct i2c_client *client,
return 0;
}
-static bool raydium_i2c_boot_trigger(struct i2c_client *client)
+static int raydium_i2c_boot_trigger(struct i2c_client *client)
{
static const u8 cmd[7][6] = {
{ 0x08, 0x0C, 0x09, 0x00, 0x50, 0xD7 },
@@ -466,10 +466,10 @@ static bool raydium_i2c_boot_trigger(struct i2c_client *client)
}
}
- return false;
+ return 0;
}
-static bool raydium_i2c_fw_trigger(struct i2c_client *client)
+static int raydium_i2c_fw_trigger(struct i2c_client *client)
{
static const u8 cmd[5][11] = {
{ 0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0xD7, 0, 0, 0 },
@@ -492,7 +492,7 @@ static bool raydium_i2c_fw_trigger(struct i2c_client *client)
}
}
- return false;
+ return 0;
}
static int raydium_i2c_check_path(struct i2c_client *client)
--
2.20.1
From: Hans de Goede <[email protected]>
commit efaa87fa0947d525cf7c075316adde4e3ac7720b upstream.
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") added a quirk for some models of the HP x2 10 series.
There are 2 issues with the comment describing the quirk:
1) The comment claims the DMI quirk applies to all Cherry Trail based HP x2
10 models. In the mean time I have learned that there are at least 3
models of the HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
And this quirk's DMI matches only match the Cherry Trail SoC + TI PMIC
SoC, which is good because we want a slightly different quirk for the
others. This commit updates the comment to make it clear that the quirk
is only for the Cherry Trail SoC + TI PMIC models.
2) The comment says that it is ok to disable wakeup on all ACPI GPIO event
handlers, because there is only the one for the embedded-controller
events. This is not true, there also is a handler for the special
INT0002 device which is related to USB wakeups. We need to also disable
wakeups on that one because the device turns of the USB-keyboard built
into the dock when closing the lid. The XHCI controller takes a while
to notice this, so it only notices it when already suspended, causing
a spurious wakeup because of this. So disabling wakeup on all handlers
is the right thing to do, but not because there only is the one handler
for the EC events. This commit updates the comment to correctly reflect
this.
Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpiolib-acpi.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1348,12 +1348,14 @@ static const struct dmi_system_id gpioli
},
{
/*
- * Various HP X2 10 Cherry Trail models use an external
- * embedded-controller connected via I2C + an ACPI GPIO
- * event handler. The embedded controller generates various
- * spurious wakeup events when suspended. So disable wakeup
- * for its handler (it uses the only ACPI GPIO event handler).
- * This breaks wakeup when opening the lid, the user needs
+ * HP X2 10 models with Cherry Trail SoC + TI PMIC use an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FF:01 pin 0, causing spurious wakeups.
+ * When suspending by closing the LID, the power to the USB
+ * keyboard is turned off, causing INT0002 ACPI events to
+ * trigger once the XHCI controller notices the keyboard is
+ * gone. So INT0002 events cause spurious wakeups too. Ignoring
+ * EC wakes breaks wakeup when opening the lid, the user needs
* to press the power-button to wakeup the system. The
* alternative is suspend simply not working, which is worse.
*/
From: Hans de Goede <[email protected]>
commit 0e91506ba00730f088961a8d39f8693b0f8e3fea upstream.
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") was added to deal with spurious wakeups on one specific
model of the HP x2 10 series. In the mean time I have learned that there
are at least 3 different HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
And the original quirk is only correct for (and only matches the)
Cherry Trail SoC + TI PMIC model.
The Bay Trail SoC + AXP288 PMIC model has different DMI strings, has
the external EC interrupt on a different GPIO pin and only needs to ignore
wakeups on the EC interrupt, the INT0002 device works fine on this model.
This commit adds an extra DMI based quirk for the HP x2 10 BYT + AXP288
model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin
on this model. This fixes spurious wakeups from suspend on this model.
Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpiolib-acpi.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1425,6 +1425,21 @@ static const struct dmi_system_id gpioli
.ignore_wake = "INT33FF:01@0,INT0002:00@2",
},
},
+ {
+ /*
+ * HP X2 10 models with Bay Trail SoC + AXP288 PMIC use an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FC:02 pin 28, causing spurious wakeups.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+ DMI_MATCH(DMI_BOARD_NAME, "815D"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "INT33FC:02@28",
+ },
+ },
{} /* Terminating entry */
};
From: Pawel Dembicki <[email protected]>
commit 6cb2669cb97fc4fdf526127159ac59caae052247 upstream.
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2020 ProdID=2033 Rev= 2.28
S: Manufacturer=Mobile Connect
S: Product=Mobile Connect
S: SerialNumber=f842866cfd5a
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Co-developed-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Pawel Dembicki <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1998,6 +1998,8 @@ static const struct usb_device_id option
.driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */
.driver_info = RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2033, 0xff), /* BroadMobi BM806U */
+ .driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */
.driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */
From: Pawel Dembicki <[email protected]>
commit 007d20dca2376a751b1dad03442f118438b7e65e upstream.
ASKEY WWHC050 is a mcie LTE modem.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1690 ProdID=7588 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=813f0eef6e6e
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution.
Co-developed-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Pawel Dembicki <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1994,6 +1994,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
+ { USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff), /* ASKEY WWHC050 */
+ .driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */
.driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */
From: David Howells <[email protected]>
[ Upstream commit 4636cf184d6d9a92a56c2554681ea520dd4fe49a ]
Fix a couple of tracelines to indicate the usage count after the atomic op,
not the usage count before it to be consistent with other afs and rxrpc
trace lines.
Change the wording of the afs_call_trace_work trace ID label from "WORK" to
"QUEUE" to reflect the fact that it's queueing work, not doing work.
Fixes: 341f741f04be ("afs: Refcount the afs_call struct")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/rxrpc.c | 4 ++--
include/trace/events/afs.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c
index ccc9c708a860a..7dc9c78a1c31c 100644
--- a/fs/afs/rxrpc.c
+++ b/fs/afs/rxrpc.c
@@ -173,7 +173,7 @@ void afs_put_call(struct afs_call *call)
int n = atomic_dec_return(&call->usage);
int o = atomic_read(&afs_outstanding_calls);
- trace_afs_call(call, afs_call_trace_put, n + 1, o,
+ trace_afs_call(call, afs_call_trace_put, n, o,
__builtin_return_address(0));
ASSERTCMP(n, >=, 0);
@@ -619,7 +619,7 @@ static void afs_wake_up_async_call(struct sock *sk, struct rxrpc_call *rxcall,
u = __atomic_add_unless(&call->usage, 1, 0);
if (u != 0) {
- trace_afs_call(call, afs_call_trace_wake, u,
+ trace_afs_call(call, afs_call_trace_wake, u + 1,
atomic_read(&afs_outstanding_calls),
__builtin_return_address(0));
diff --git a/include/trace/events/afs.h b/include/trace/events/afs.h
index 8b95c16b70454..0978bdae2243b 100644
--- a/include/trace/events/afs.h
+++ b/include/trace/events/afs.h
@@ -40,7 +40,7 @@ enum afs_call_trace {
EM(afs_call_trace_free, "FREE ") \
EM(afs_call_trace_put, "PUT ") \
EM(afs_call_trace_wake, "WAKE ") \
- E_(afs_call_trace_work, "WORK ")
+ E_(afs_call_trace_work, "QUEUE")
/*
* Export enum symbols via userspace.
--
2.20.1
From: Pawel Dembicki <[email protected]>
commit dfee7e2f478346b12ea651d5c28b069f6a4af563 upstream.
This modem is embedded on dlink dwr-960 router.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=d191 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution
Signed-off-by: Pawel Dembicki <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1994,6 +1994,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
+ { USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff), /* Wistron Neweb D19Q1 */
+ .driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff), /* ASKEY WWHC050 */
.driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */
From: Wen Xiong <[email protected]>
[ Upstream commit 394b61711f3ce33f75bf70a3e22938464a13b3ee ]
When trying to rescan disks in petitboot shell, we hit the following
softlockup stacktrace:
Kernel panic - not syncing: System is deadlocked on memory
[ 241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1
[ 241.223406] Call Trace:
[ 241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable)
[ 241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc
[ 241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4
[ 241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8
[ 241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4
[ 241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8
[ 241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98
[ 241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c
[ 241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404
[ 241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48
[ 241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4
[ 241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270
[ 241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78
[ 241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70
[ 241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264
[ 241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c
[ 241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478
[ 241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c
[ 241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158
[ 241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114
[ 241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c
[ 241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78
[ 241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8
[ 241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60
[ 241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc
[ 241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc
[ 241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68
As a part of the scan process Linux will allocate and configure a
scsi_device for each target to be scanned. If the device is not present,
then the scsi_device is torn down. As a part of scsi_device teardown a
workqueue item will be scheduled and the lockups we see are because there
are 250k workqueue items to be processed. Accoding to the specification of
SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters
to 4.
The patch fixes softlockup issue.
Thanks for Oliver Halloran's help with debugging and explanation!
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wen Xiong <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ipr.c | 3 ++-
drivers/scsi/ipr.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 35d54ee1c5c74..b172f0a020834 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9962,6 +9962,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
ioa_cfg->max_devs_supported = ipr_max_devs;
if (ioa_cfg->sis64) {
+ host->max_channel = IPR_MAX_SIS64_BUSES;
host->max_id = IPR_MAX_SIS64_TARGETS_PER_BUS;
host->max_lun = IPR_MAX_SIS64_LUNS_PER_TARGET;
if (ipr_max_devs > IPR_MAX_SIS64_DEVS)
@@ -9970,6 +9971,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
+ ((sizeof(struct ipr_config_table_entry64)
* ioa_cfg->max_devs_supported)));
} else {
+ host->max_channel = IPR_VSET_BUS;
host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
if (ipr_max_devs > IPR_MAX_PHYSICAL_DEVS)
@@ -9979,7 +9981,6 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
* ioa_cfg->max_devs_supported)));
}
- host->max_channel = IPR_VSET_BUS;
host->unique_id = host->host_no;
host->max_cmd_len = IPR_MAX_CDB_LEN;
host->can_queue = ioa_cfg->max_cmds;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 085e6c90f9e6a..89b36987ff309 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1306,6 +1306,7 @@ struct ipr_resource_entry {
#define IPR_ARRAY_VIRTUAL_BUS 0x1
#define IPR_VSET_VIRTUAL_BUS 0x2
#define IPR_IOAFP_VIRTUAL_BUS 0x3
+#define IPR_MAX_SIS64_BUSES 0x4
#define IPR_GET_RES_PHYS_LOC(res) \
(((res)->bus << 24) | ((res)->target << 8) | (res)->lun)
--
2.20.1
From: Torsten Hilbrich <[email protected]>
commit 2a9de3af21aa8c31cd68b0b39330d69f8c1e59df upstream.
The vti6_rcv function performs some tests on the retrieved tunnel
including checking the IP protocol, the XFRM input policy, the
source and destination address.
In all but one places the skb is released in the error case. When
the input policy check fails the network packet is leaked.
Using the same goto-label discard in this case to fix this problem.
Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Torsten Hilbrich <[email protected]>
Reviewed-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_vti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -315,7 +315,7 @@ static int vti6_rcv(struct sk_buff *skb)
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
rcu_read_unlock();
- return 0;
+ goto discard;
}
ipv6h = ipv6_hdr(skb);
From: Nicolas Cavallari <[email protected]>
[ Upstream commit ba32679cac50c38fdf488296f96b1f3175532b8e ]
When trying to transmit to an unknown destination, the mesh code would
unconditionally transmit a HWMP PREQ even if HWMP is not the current
path selection algorithm.
Signed-off-by: Nicolas Cavallari <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/mesh_hwmp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 994dde6e5f9d9..986e9b6b961d2 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1137,7 +1137,8 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata,
}
}
- if (!(mpath->flags & MESH_PATH_RESOLVING))
+ if (!(mpath->flags & MESH_PATH_RESOLVING) &&
+ mesh_path_sel_is_hwmp(sdata))
mesh_queue_preq(mpath, PREQ_Q_F_START);
if (skb_queue_len(&mpath->frame_queue) >= MESH_FRAME_QUEUE_LEN)
--
2.20.1
From: Edward Cree <[email protected]>
commit df81dfcfd6991d547653d46c051bac195cd182c1 upstream.
The handling of notify->work did not properly maintain notify->kref in two
cases:
1) where the work was already scheduled, another irq_set_affinity_locked()
would get the ref and (no-op-ly) schedule the work. Thus when
irq_affinity_notify() ran, it would drop the original ref but not the
additional one.
2) when cancelling the (old) work in irq_set_affinity_notifier(), if there
was outstanding work a ref had been got for it but was never put.
Fix both by checking the return values of the work handling functions
(schedule_work() for (1) and cancel_work_sync() for (2)) and put the
extra ref if the return value indicates preexisting work.
Fixes: cd7eab44e994 ("genirq: Add IRQ affinity notifiers")
Fixes: 59c39840f5ab ("genirq: Prevent use-after-free and work list corruption")
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Ben Hutchings <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/irq/manage.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -224,7 +224,11 @@ int irq_set_affinity_locked(struct irq_d
if (desc->affinity_notify) {
kref_get(&desc->affinity_notify->kref);
- schedule_work(&desc->affinity_notify->work);
+ if (!schedule_work(&desc->affinity_notify->work)) {
+ /* Work was already scheduled, drop our extra ref */
+ kref_put(&desc->affinity_notify->kref,
+ desc->affinity_notify->release);
+ }
}
irqd_set(data, IRQD_AFFINITY_SET);
@@ -324,7 +328,10 @@ irq_set_affinity_notifier(unsigned int i
raw_spin_unlock_irqrestore(&desc->lock, flags);
if (old_notify) {
- cancel_work_sync(&old_notify->work);
+ if (cancel_work_sync(&old_notify->work)) {
+ /* Pending work had a ref, put that one too */
+ kref_put(&old_notify->kref, old_notify->release);
+ }
kref_put(&old_notify->kref, old_notify->release);
}
From: Nathan Chancellor <[email protected]>
[ Upstream commit 7395f62d95aafacdb9bd4996ec2f95b4a655d7e6 ]
Clang warns:
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2860:9: warning:
converting the result of '?:' with integer constants to a boolean always
evaluates to 'true' [-Wtautological-constant-compare]
return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom,
^
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:131:34: note: expanded
from macro 'DPAA_FD_DATA_ALIGNMENT'
\#define DPAA_FD_DATA_ALIGNMENT (fman_has_errata_a050385() ? 64 : 16)
^
1 warning generated.
This was exposed by commit 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385
workaround") even though it appears to have been an issue since the
introductory commit 9ad1a3749333 ("dpaa_eth: add support for DPAA
Ethernet") since DPAA_FD_DATA_ALIGNMENT has never been able to be zero.
Just replace the whole boolean expression with the true branch, as it is
always been true.
Link: https://github.com/ClangBuiltLinux/linux/issues/928
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 39b8b6730e77c..67246d42c3d9f 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2646,9 +2646,7 @@ static inline u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl)
headroom = (u16)(bl->priv_data_size + DPAA_PARSE_RESULTS_SIZE +
DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE);
- return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom,
- DPAA_FD_DATA_ALIGNMENT) :
- headroom;
+ return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT);
}
static int dpaa_eth_probe(struct platform_device *pdev)
--
2.20.1
From: Dominik Czarnota <[email protected]>
[ Upstream commit f3cc008bf6d59b8d93b4190e01d3e557b0040e15 ]
This patch fixes an off-by-one error in strncpy size argument in
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in:
strncmp(opt, "eee_timer:", 6)
the passed string literal: "eee_timer:" has 10 bytes (without the NULL
byte) and the passed size argument is 6. As a result, the logic will
also accept other, malformed strings, e.g. "eee_tiXXX:".
This bug doesn't seem to have any security impact since its present in
module's cmdline parsing code.
Signed-off-by: Dominik Czarnota <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index 89831adb8eb75..6d27eec85fcef 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -2284,7 +2284,7 @@ static int __init sxgbe_cmdline_opt(char *str)
if (!str || !*str)
return -EINVAL;
while ((opt = strsep(&str, ",")) != NULL) {
- if (!strncmp(opt, "eee_timer:", 6)) {
+ if (!strncmp(opt, "eee_timer:", 10)) {
if (kstrtoint(opt + 10, 0, &eee_timer))
goto err;
}
--
2.20.1
From: Raed Salem <[email protected]>
commit 03891f820c2117b19e80b370281eb924a09cf79f upstream.
This patch to handle the asynchronous unregister
device event so the device IPsec offload resources
could be cleanly released.
Fixes: e4db5b61c572 ("xfrm: policy: remove pcpu policy cache")
Signed-off-by: Raed Salem <[email protected]>
Reviewed-by: Boris Pismenny <[email protected]>
Reviewed-by: Saeed Mahameed <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_device.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/xfrm/xfrm_device.c
+++ b/net/xfrm/xfrm_device.c
@@ -187,6 +187,7 @@ static int xfrm_dev_event(struct notifie
return xfrm_dev_feat_change(dev);
case NETDEV_DOWN:
+ case NETDEV_UNREGISTER:
return xfrm_dev_down(dev);
}
return NOTIFY_DONE;
From: Mike Gilbert <[email protected]>
[ Upstream commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b ]
Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.
./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here
The -fno-common option will be enabled by default in GCC 10.
Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c | 2 +-
tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c | 2 +-
tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c | 2 ++
tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h | 2 +-
4 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
index 2116df9ad8325..c097a3748674f 100644
--- a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
@@ -83,7 +83,7 @@ static struct pci_access *pci_acc;
static struct pci_dev *amd_fam14h_pci_dev;
static int nbp1_entered;
-struct timespec start_time;
+static struct timespec start_time;
static unsigned long long timediff;
#ifdef DEBUG
diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
index 5b3205f162174..5277df27191f3 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
@@ -21,7 +21,7 @@ struct cpuidle_monitor cpuidle_sysfs_monitor;
static unsigned long long **previous_count;
static unsigned long long **current_count;
-struct timespec start_time;
+static struct timespec start_time;
static unsigned long long timediff;
static int cpuidle_get_count_percent(unsigned int id, double *percent,
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
index 05f953f0f0a0c..80a21cb67d94f 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
@@ -29,6 +29,8 @@ struct cpuidle_monitor *all_monitors[] = {
0
};
+int cpu_count;
+
static struct cpuidle_monitor *monitors[MONITORS_MAX];
static unsigned int avail_monitors;
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
index 9e43f3371fbc6..3558bbae2b5dc 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
@@ -18,7 +18,7 @@
#define CSTATE_NAME_LEN 5
#define CSTATE_DESC_LEN 60
-int cpu_count;
+extern int cpu_count;
/* Hard to define the right names ...: */
enum power_range_e {
--
2.20.1
From: Mans Rullgard <[email protected]>
commit 52974d94a206ce428d9d9b6eaa208238024be82a upstream.
When handling a PIO bulk transfer with highmem buffer, a temporary
mapping is assigned to urb->transfer_buffer. After the transfer is
complete, an invalid address is left behind in this pointer. This is
not ordinarily a problem since nothing touches that buffer before the
urb is released. However, when usbmon is active, usbmon_urb_complete()
calls (indirectly) mon_bin_get_data() which does access the transfer
buffer if it is set. To prevent an invalid memory access here, reset
urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not
set it at all (musb_host_tx()).
Fixes: 8e8a55165469 ("usb: musb: host: Handle highmem in PIO mode")
Signed-off-by: Mans Rullgard <[email protected]>
Cc: [email protected]
Signed-off-by: Bin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/musb/musb_host.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1494,10 +1494,7 @@ done:
* We need to map sg if the transfer_buffer is
* NULL.
*/
- if (!urb->transfer_buffer)
- qh->use_sg = true;
-
- if (qh->use_sg) {
+ if (!urb->transfer_buffer) {
/* sg_miter_start is already done in musb_ep_program */
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
@@ -1505,9 +1502,8 @@ done:
status = -EINVAL;
goto done;
}
- urb->transfer_buffer = qh->sg_miter.addr;
length = min_t(u32, length, qh->sg_miter.length);
- musb_write_fifo(hw_ep, length, urb->transfer_buffer);
+ musb_write_fifo(hw_ep, length, qh->sg_miter.addr);
qh->sg_miter.consumed = length;
sg_miter_stop(&qh->sg_miter);
} else {
@@ -1516,11 +1512,6 @@ done:
qh->segsize = length;
- if (qh->use_sg) {
- if (offset + length >= urb->transfer_buffer_length)
- qh->use_sg = false;
- }
-
musb_ep_select(mbase, epnum);
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
@@ -2038,8 +2029,10 @@ finish:
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
- if (qh->use_sg)
+ if (qh->use_sg) {
qh->use_sg = false;
+ urb->transfer_buffer = NULL;
+ }
if (urb->status == -EINPROGRESS)
urb->status = status;
From: Johan Hovold <[email protected]>
commit 485b06aadb933190f4bc44e006076bc27a23f205 upstream.
Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.
This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.
Note that the sanity checks in stv06xx_start() and pb0100_start() are
not redundant as the driver is mixing looking up altsettings by index
and by number, which may not coincide.
Fixes: 8668d504d72c ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor")
Fixes: c0b33bdc5b8d ("[media] gspca-stv06xx: support bandwidth changing")
Cc: stable <[email protected]> # 2.6.31
Cc: Hans de Goede <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/stv06xx/stv06xx.c | 19 ++++++++++++++++++-
drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c | 4 ++++
2 files changed, 22 insertions(+), 1 deletion(-)
--- a/drivers/media/usb/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c
@@ -289,6 +289,9 @@ static int stv06xx_start(struct gspca_de
return -EIO;
}
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
if (err < 0)
@@ -313,11 +316,21 @@ out:
static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
{
+ struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
struct sd *sd = (struct sd *) gspca_dev;
+ intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+ if (intfc->num_altsetting < 2)
+ return -ENODEV;
+
+ alt = &intfc->altsetting[1];
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
- alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
alt->endpoint[0].desc.wMaxPacketSize =
cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
@@ -330,6 +343,10 @@ static int stv06xx_isoc_nego(struct gspc
struct usb_host_interface *alt;
struct sd *sd = (struct sd *) gspca_dev;
+ /*
+ * Existence of altsetting and endpoint was verified in
+ * stv06xx_isoc_init()
+ */
alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
--- a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
@@ -194,6 +194,10 @@ static int pb0100_start(struct sd *sd)
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
if (!alt)
return -ENODEV;
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
/* If we don't have enough bandwidth use a lower framerate */
From: Johan Hovold <[email protected]>
commit a246b4d547708f33ff4d4b9a7a5dbac741dc89d8 upstream.
Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.
This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.
Note that the sanity check in cit_get_packet_size() is not redundant as
the driver is mixing looking up altsettings by index and by number,
which may not coincide.
Fixes: 659fefa0eb17 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01")
Fixes: 59f8b0bf3c12 ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting")
Cc: stable <[email protected]> # 2.6.37
Cc: Hans de Goede <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/xirlink_cit.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
--- a/drivers/media/usb/gspca/xirlink_cit.c
+++ b/drivers/media/usb/gspca/xirlink_cit.c
@@ -1451,6 +1451,9 @@ static int cit_get_packet_size(struct gs
return -EIO;
}
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
return le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
}
@@ -2634,6 +2637,7 @@ static int sd_start(struct gspca_dev *gs
static int sd_isoc_init(struct gspca_dev *gspca_dev)
{
+ struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
int max_packet_size;
@@ -2649,8 +2653,17 @@ static int sd_isoc_init(struct gspca_dev
break;
}
+ intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+ if (intfc->num_altsetting < 2)
+ return -ENODEV;
+
+ alt = &intfc->altsetting[1];
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
- alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
return 0;
@@ -2673,6 +2686,9 @@ static int sd_isoc_nego(struct gspca_dev
break;
}
+ /*
+ * Existence of altsetting and endpoint was verified in sd_isoc_init()
+ */
alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
if (packet_size <= min_packet_size)
From: Jouni Malinen <[email protected]>
commit ce2e1ca703071723ca2dd94d492a5ab6d15050da upstream.
mac80211 used to check port authorization in the Data frame enqueue case
when going through start_xmit(). However, that authorization status may
change while the frame is waiting in a queue. Add a similar check in the
dequeue case to avoid sending previously accepted frames after
authorization change. This provides additional protection against
potential leaking of frames after a station has been disconnected and
the keys for it are being removed.
Cc: [email protected]
Signed-off-by: Jouni Malinen <[email protected]>
Link: https://lore.kernel.org/r/20200326155133.ced84317ea29.I34d4c47cd8cc8a4042b38a76f16a601fbcbfd9b3@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/tx.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3451,8 +3451,25 @@ begin:
tx.skb = skb;
tx.sdata = vif_to_sdata(info->control.vif);
- if (txq->sta)
+ if (txq->sta) {
tx.sta = container_of(txq->sta, struct sta_info, sta);
+ /*
+ * Drop unicast frames to unauthorised stations unless they are
+ * EAPOL frames from the local station.
+ */
+ if (unlikely(!ieee80211_vif_is_mesh(&tx.sdata->vif) &&
+ tx.sdata->vif.type != NL80211_IFTYPE_OCB &&
+ !is_multicast_ether_addr(hdr->addr1) &&
+ !test_sta_flag(tx.sta, WLAN_STA_AUTHORIZED) &&
+ (!(info->control.flags &
+ IEEE80211_TX_CTRL_PORT_CTRL_PROTO) ||
+ !ether_addr_equal(tx.sdata->vif.addr,
+ hdr->addr2)))) {
+ I802_DEBUG_INC(local->tx_handlers_drop_unauth_port);
+ ieee80211_free_txskb(&local->hw, skb);
+ goto begin;
+ }
+ }
/*
* The key can be removed while the packet was queued, so need to call
From: YueHaibing <[email protected]>
commit 4c59406ed00379c8663f8663d82b2537467ce9d7 upstream.
After xfrm_add_policy add a policy, its ref is 2, then
xfrm_policy_timer
read_lock
xp->walk.dead is 0
....
mod_timer()
xfrm_policy_kill
policy->walk.dead = 1
....
del_timer(&policy->timer)
xfrm_pol_put //ref is 1
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_pol_hold //ref is 1
read_unlock
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_policy_destroy is called twice, which may leads to
double free.
Call Trace:
RIP: 0010:refcount_warn_saturate+0x161/0x210
...
xfrm_policy_timer+0x522/0x600
call_timer_fn+0x1b3/0x5e0
? __xfrm_decode_session+0x2990/0x2990
? msleep+0xb0/0xb0
? _raw_spin_unlock_irq+0x24/0x40
? __xfrm_decode_session+0x2990/0x2990
? __xfrm_decode_session+0x2990/0x2990
run_timer_softirq+0x5c5/0x10e0
Fix this by use write_lock_bh in xfrm_policy_kill.
Fixes: ea2dea9dacc2 ("xfrm: remove policy lock when accessing policy->walk.dead")
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Timo Teräs <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_policy.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -301,7 +301,9 @@ EXPORT_SYMBOL(xfrm_policy_destroy);
static void xfrm_policy_kill(struct xfrm_policy *policy)
{
+ write_lock_bh(&policy->lock);
policy->walk.dead = 1;
+ write_unlock_bh(&policy->lock);
atomic_inc(&policy->genid);
From: Eric Biggers <[email protected]>
commit ca4463bf8438b403596edd0ec961ca0d4fbe0220 upstream.
The VT_DISALLOCATE ioctl can free a virtual console while tty_release()
is still running, causing a use-after-free in con_shutdown(). This
occurs because VT_DISALLOCATE considers a virtual console's
'struct vc_data' to be unused as soon as the corresponding tty's
refcount hits 0. But actually it may be still being closed.
Fix this by making vc_data be reference-counted via the embedded
'struct tty_port'. A newly allocated virtual console has refcount 1.
Opening it for the first time increments the refcount to 2. Closing it
for the last time decrements the refcount (in tty_operations::cleanup()
so that it happens late enough), as does VT_DISALLOCATE.
Reproducer:
#include <fcntl.h>
#include <linux/vt.h>
#include <sys/ioctl.h>
#include <unistd.h>
int main()
{
if (fork()) {
for (;;)
close(open("/dev/tty5", O_RDWR));
} else {
int fd = open("/dev/tty10", O_RDWR);
for (;;)
ioctl(fd, VT_DISALLOCATE, 5);
}
}
KASAN report:
BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129
CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
Call Trace:
[...]
con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514
tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629
tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789
[...]
Allocated by task 129:
[...]
kzalloc include/linux/slab.h:669 [inline]
vc_allocate drivers/tty/vt/vt.c:1085 [inline]
vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066
con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229
tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline]
tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341
tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
[...]
Freed by task 130:
[...]
kfree+0xbf/0x1e0 mm/slab.c:3757
vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline]
vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818
tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
[...]
Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle")
Cc: <[email protected]> # v3.4+
Reported-by: [email protected]
Acked-by: Jiri Slaby <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt.c | 23 ++++++++++++++++++++++-
drivers/tty/vt/vt_ioctl.c | 12 ++++--------
2 files changed, 26 insertions(+), 9 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -751,6 +751,17 @@ static void visual_init(struct vc_data *
vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;
}
+static void vc_port_destruct(struct tty_port *port)
+{
+ struct vc_data *vc = container_of(port, struct vc_data, port);
+
+ kfree(vc);
+}
+
+static const struct tty_port_operations vc_port_ops = {
+ .destruct = vc_port_destruct,
+};
+
int vc_allocate(unsigned int currcons) /* return 0 on success */
{
struct vt_notifier_param param;
@@ -776,6 +787,7 @@ int vc_allocate(unsigned int currcons) /
vc_cons[currcons].d = vc;
tty_port_init(&vc->port);
+ vc->port.ops = &vc_port_ops;
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
visual_init(vc, currcons, 1);
@@ -2895,6 +2907,7 @@ static int con_install(struct tty_driver
tty->driver_data = vc;
vc->port.tty = tty;
+ tty_port_get(&vc->port);
if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
@@ -2930,6 +2943,13 @@ static void con_shutdown(struct tty_stru
console_unlock();
}
+static void con_cleanup(struct tty_struct *tty)
+{
+ struct vc_data *vc = tty->driver_data;
+
+ tty_port_put(&vc->port);
+}
+
static int default_color = 7; /* white */
static int default_italic_color = 2; // green (ASCII)
static int default_underline_color = 3; // cyan (ASCII)
@@ -3054,7 +3074,8 @@ static const struct tty_operations con_o
.throttle = con_throttle,
.unthrottle = con_unthrottle,
.resize = vt_resize,
- .shutdown = con_shutdown
+ .shutdown = con_shutdown,
+ .cleanup = con_cleanup,
};
static struct cdev vc0_cdev;
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -310,10 +310,8 @@ static int vt_disallocate(unsigned int v
vc = vc_deallocate(vc_num);
console_unlock();
- if (vc && vc_num >= MIN_NR_CONSOLES) {
- tty_port_destroy(&vc->port);
- kfree(vc);
- }
+ if (vc && vc_num >= MIN_NR_CONSOLES)
+ tty_port_put(&vc->port);
return ret;
}
@@ -333,10 +331,8 @@ static void vt_disallocate_all(void)
console_unlock();
for (i = 1; i < MAX_NR_CONSOLES; i++) {
- if (vc[i] && i >= MIN_NR_CONSOLES) {
- tty_port_destroy(&vc[i]->port);
- kfree(vc[i]);
- }
+ if (vc[i] && i >= MIN_NR_CONSOLES)
+ tty_port_put(&vc[i]->port);
}
}
From: Johan Hovold <[email protected]>
commit bca243b1ce0e46be26f7c63b5591dfbb41f558e5 upstream.
commit 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking") added
an endpoint sanity check to address a NULL-pointer dereference on probe.
Unfortunately the check was done on the current altsetting which was later
changed.
Fix this by moving the sanity check to after the altsetting is changed.
Fixes: 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking")
Cc: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/b2c2/flexcop-usb.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -510,6 +510,9 @@ static int flexcop_usb_init(struct flexc
return ret;
}
+ if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
switch (fc_usb->udev->speed) {
case USB_SPEED_LOW:
err("cannot handle USB speed because it is too slow.");
@@ -543,9 +546,6 @@ static int flexcop_usb_probe(struct usb_
struct flexcop_device *fc = NULL;
int ret;
- if (intf->cur_altsetting->desc.bNumEndpoints < 1)
- return -ENODEV;
-
if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
err("out of memory\n");
return -ENOMEM;
From: Eric Biggers <[email protected]>
commit 7cf64b18b0b96e751178b8d0505d8466ff5a448f upstream.
vt_in_use() dereferences console_driver->ttys[i] without proper locking.
This is broken because the tty can be closed and freed concurrently.
We could fix this by using 'READ_ONCE(console_driver->ttys[i]) != NULL'
and skipping the check of tty_struct::count. But, looking at
console_driver->ttys[i] isn't really appropriate anyway because even if
it is NULL the tty can still be in the process of being closed.
Instead, fix it by making vt_in_use() require console_lock() and check
whether the vt is allocated and has port refcount > 1. This works since
following the patch "vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use
virtual console" the port refcount is incremented while the vt is open.
Reproducer (very unreliable, but it worked for me after a few minutes):
#include <fcntl.h>
#include <linux/vt.h>
int main()
{
int fd, nproc;
struct vt_stat state;
char ttyname[16];
fd = open("/dev/tty10", O_RDONLY);
for (nproc = 1; nproc < 8; nproc *= 2)
fork();
for (;;) {
sprintf(ttyname, "/dev/tty%d", rand() % 8);
close(open(ttyname, O_RDONLY));
ioctl(fd, VT_GETSTATE, &state);
}
}
KASAN report:
BUG: KASAN: use-after-free in vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline]
BUG: KASAN: use-after-free in vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657
Read of size 4 at addr ffff888065722468 by task syz-vt2/132
CPU: 0 PID: 132 Comm: syz-vt2 Not tainted 5.6.0-rc5-00130-g089b6d3654916 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
Call Trace:
[...]
vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline]
vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657
tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
[...]
Allocated by task 136:
[...]
kzalloc include/linux/slab.h:669 [inline]
alloc_tty_struct+0x96/0x8a0 drivers/tty/tty_io.c:2982
tty_init_dev+0x23/0x350 drivers/tty/tty_io.c:1334
tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
[...]
Freed by task 41:
[...]
kfree+0xbf/0x200 mm/slab.c:3757
free_tty_struct+0x8d/0xb0 drivers/tty/tty_io.c:177
release_one_tty+0x22d/0x2f0 drivers/tty/tty_io.c:1468
process_one_work+0x7f1/0x14b0 kernel/workqueue.c:2264
worker_thread+0x8b/0xc80 kernel/workqueue.c:2410
[...]
Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle")
Cc: <[email protected]> # v3.4+
Acked-by: Jiri Slaby <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -43,9 +43,15 @@ bool vt_dont_switch;
static inline bool vt_in_use(unsigned int i)
{
- extern struct tty_driver *console_driver;
+ const struct vc_data *vc = vc_cons[i].d;
- return console_driver->ttys[i] && console_driver->ttys[i]->count;
+ /*
+ * console_lock must be held to prevent the vc from being deallocated
+ * while we're checking whether it's in-use.
+ */
+ WARN_CONSOLE_UNLOCKED();
+
+ return vc && kref_read(&vc->port.kref) > 1;
}
static inline bool vt_busy(int i)
@@ -643,15 +649,16 @@ int vt_ioctl(struct tty_struct *tty,
struct vt_stat __user *vtstat = up;
unsigned short state, mask;
- /* Review: FIXME: Console lock ? */
if (put_user(fg_console + 1, &vtstat->v_active))
ret = -EFAULT;
else {
state = 1; /* /dev/tty0 is always open */
+ console_lock(); /* required by vt_in_use() */
for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
++i, mask <<= 1)
if (vt_in_use(i))
state |= mask;
+ console_unlock();
ret = put_user(state, &vtstat->v_state);
}
break;
@@ -661,10 +668,11 @@ int vt_ioctl(struct tty_struct *tty,
* Returns the first available (non-opened) console.
*/
case VT_OPENQRY:
- /* FIXME: locking ? - but then this is a stupid API */
+ console_lock(); /* required by vt_in_use() */
for (i = 0; i < MAX_NR_CONSOLES; ++i)
if (!vt_in_use(i))
break;
+ console_unlock();
uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
goto setint;
From: Madalin Bucur <[email protected]>
[ Upstream commit b54d3900862374e1bb2846e6b39d79c896c0b200 ]
The LS1043A SoC is affected by the A050385 erratum stating that
FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak thus stopping further packet processing.
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
index 169e171407a63..acd205ef329f7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -21,6 +21,8 @@
};
&fman0 {
+ fsl,erratum-a050385;
+
/* these aliases provide the FMan ports mapping */
enet0: ethernet@e0000 {
};
--
2.20.1
From: Greg Kroah-Hartman <[email protected]>
commit 5c6f25887963f15492b604dd25cb149c501bbabf upstream.
Trying to initialize a structure with "= {};" will not always clean out
all padding locations in a structure. So be explicit and call memset to
initialize everything for a number of bpf information structures that
are then copied from userspace, sometimes from smaller memory locations
than the size of the structure.
Reported-by: Daniel Borkmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/syscall.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1364,7 +1364,7 @@ static int bpf_prog_get_info_by_fd(struc
union bpf_attr __user *uattr)
{
struct bpf_prog_info __user *uinfo = u64_to_user_ptr(attr->info.info);
- struct bpf_prog_info info = {};
+ struct bpf_prog_info info;
u32 info_len = attr->info.info_len;
char __user *uinsns;
u32 ulen;
@@ -1375,6 +1375,7 @@ static int bpf_prog_get_info_by_fd(struc
return err;
info_len = min_t(u32, sizeof(info), info_len);
+ memset(&info, 0, sizeof(info));
if (copy_from_user(&info, uinfo, info_len))
return -EFAULT;
@@ -1420,7 +1421,7 @@ static int bpf_map_get_info_by_fd(struct
union bpf_attr __user *uattr)
{
struct bpf_map_info __user *uinfo = u64_to_user_ptr(attr->info.info);
- struct bpf_map_info info = {};
+ struct bpf_map_info info;
u32 info_len = attr->info.info_len;
int err;
@@ -1429,6 +1430,7 @@ static int bpf_map_get_info_by_fd(struct
return err;
info_len = min_t(u32, sizeof(info), info_len);
+ memset(&info, 0, sizeof(info));
info.type = map->map_type;
info.id = map->id;
info.key_size = map->key_size;
From: Hans de Goede <[email protected]>
commit 0c625ccfe6f754d0896b8881f5c85bcb81699f1f upstream.
There are at least 3 models of the HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO
events on the external embedded-controller pin to avoid spurious wakeups
on the HP x2 10 CHT + AXP288 model too.
This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288
model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin
on this model. This fixes spurious wakeups from suspend on this model.
Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Reported-and-tested-by: Marc Lehmann <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpiolib-acpi.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1440,6 +1440,21 @@ static const struct dmi_system_id gpioli
.ignore_wake = "INT33FC:02@28",
},
},
+ {
+ /*
+ * HP X2 10 models with Cherry Trail SoC + AXP288 PMIC use an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FF:01 pin 0, causing spurious wakeups.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+ DMI_MATCH(DMI_BOARD_NAME, "813E"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "INT33FF:01@0",
+ },
+ },
{} /* Terminating entry */
};
From: Johannes Berg <[email protected]>
commit be8c827f50a0bcd56361b31ada11dc0a3c2fd240 upstream.
The original patch didn't copy the ieee80211_is_data() condition
because on most drivers the management frames don't go through
this path. However, they do on iwlwifi/mvm, so we do need to keep
the condition here.
Cc: [email protected]
Fixes: ce2e1ca70307 ("mac80211: Check port authorization in the ieee80211_tx_dequeue() case")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Woody Suwalski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/tx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3457,7 +3457,8 @@ begin:
* Drop unicast frames to unauthorised stations unless they are
* EAPOL frames from the local station.
*/
- if (unlikely(!ieee80211_vif_is_mesh(&tx.sdata->vif) &&
+ if (unlikely(ieee80211_is_data(hdr->frame_control) &&
+ !ieee80211_vif_is_mesh(&tx.sdata->vif) &&
tx.sdata->vif.type != NL80211_IFTYPE_OCB &&
!is_multicast_ether_addr(hdr->addr1) &&
!test_sta_flag(tx.sta, WLAN_STA_AUTHORIZED) &&
From: Jiri Slaby <[email protected]>
commit f400991bf872debffb01c46da882dc97d7e3248e upstream.
vt_dont_switch is pure boolean, no need for whole char.
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 6 +++---
include/linux/vt_kern.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -39,7 +39,7 @@
#include <linux/kbd_diacr.h>
#include <linux/selection.h>
-char vt_dont_switch;
+bool vt_dont_switch;
static inline bool vt_in_use(unsigned int i)
{
@@ -1026,12 +1026,12 @@ int vt_ioctl(struct tty_struct *tty,
case VT_LOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
- vt_dont_switch = 1;
+ vt_dont_switch = true;
break;
case VT_UNLOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
- vt_dont_switch = 0;
+ vt_dont_switch = false;
break;
case VT_GETHIFONTMASK:
ret = put_user(vc->vc_hi_font_mask,
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -142,7 +142,7 @@ static inline bool vt_force_oops_output(
return false;
}
-extern char vt_dont_switch;
+extern bool vt_dont_switch;
extern int default_utf8;
extern int global_cursor_default;
From: disconnect3d <[email protected]>
commit db2c549407d4a76563c579e4768f7d6d32afefba upstream.
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Keeping <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Lentine <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/map.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -90,7 +90,7 @@ static inline bool replace_android_lib(c
return true;
}
- if (!strncmp(filename, "/system/lib/", 11)) {
+ if (!strncmp(filename, "/system/lib/", 12)) {
char *ndk, *app;
const char *arch;
size_t ndk_length;
From: Madalin Bucur <[email protected]>
commit 4022d808c45277693ea86478fab1f081ebf997e8 upstream.
The correct setting for the RGMII ports on LS1043ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii_txid".
This issue was not apparent at the time as the PHY driver took the
same action for RGMII_TXID and RGMII_ID back then but it became
visible (RX no longer working) after the above patch.
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes: bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support")
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -155,12 +155,12 @@
ethernet@e4000 {
phy-handle = <&rgmii_phy1>;
- phy-connection-type = "rgmii-txid";
+ phy-connection-type = "rgmii-id";
};
ethernet@e6000 {
phy-handle = <&rgmii_phy2>;
- phy-connection-type = "rgmii-txid";
+ phy-connection-type = "rgmii-id";
};
ethernet@e8000 {
From: Johan Hovold <[email protected]>
commit 536f561d871c5781bc33d26d415685211b94032e upstream.
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on
various user requests due to a malfunctioning (or malicious) device
until the device is physically disconnected.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber")
Fixes: c53a846c48f2 ("[media] usbtv: add video controls")
Cc: stable <[email protected]> # 3.11
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Lubomir Rintel <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/usbtv/usbtv-core.c | 2 +-
drivers/media/usb/usbtv/usbtv-video.c | 5 +++--
2 files changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/media/usb/usbtv/usbtv-core.c
+++ b/drivers/media/usb/usbtv/usbtv-core.c
@@ -56,7 +56,7 @@ int usbtv_set_regs(struct usbtv *usbtv,
ret = usb_control_msg(usbtv->udev, pipe, USBTV_REQUEST_REG,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, index, NULL, 0, 0);
+ value, index, NULL, 0, USB_CTRL_GET_TIMEOUT);
if (ret < 0)
return ret;
}
--- a/drivers/media/usb/usbtv/usbtv-video.c
+++ b/drivers/media/usb/usbtv/usbtv-video.c
@@ -720,7 +720,8 @@ static int usbtv_s_ctrl(struct v4l2_ctrl
ret = usb_control_msg(usbtv->udev,
usb_rcvctrlpipe(usbtv->udev, 0), USBTV_CONTROL_REG,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, USBTV_BASE + 0x0244, (void *)data, 3, 0);
+ 0, USBTV_BASE + 0x0244, (void *)data, 3,
+ USB_CTRL_GET_TIMEOUT);
if (ret < 0)
goto error;
}
@@ -771,7 +772,7 @@ static int usbtv_s_ctrl(struct v4l2_ctrl
ret = usb_control_msg(usbtv->udev, usb_sndctrlpipe(usbtv->udev, 0),
USBTV_CONTROL_REG,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, index, (void *)data, size, 0);
+ 0, index, (void *)data, size, USB_CTRL_SET_TIMEOUT);
error:
if (ret < 0)
From: Madalin Bucur <[email protected]>
commit d79e9d7c1e4ba5f95f2ff3541880c40ea9722212 upstream.
The correct setting for the RGMII ports on LS1046ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii".
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes")
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -162,12 +162,12 @@
&fman0 {
ethernet@e4000 {
phy-handle = <&rgmii_phy1>;
- phy-connection-type = "rgmii";
+ phy-connection-type = "rgmii-id";
};
ethernet@e6000 {
phy-handle = <&rgmii_phy2>;
- phy-connection-type = "rgmii";
+ phy-connection-type = "rgmii-id";
};
ethernet@e8000 {
From: Qiujun Huang <[email protected]>
commit 1165dd73e811a07d947aee218510571f516081f6 upstream.
We can't handle the case length > WLAN_DATA_MAXLEN.
Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't
read more than that.
Thanks-to: Hillf Danton <[email protected]>
Reported-and-tested-by: [email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/wlan-ng/hfa384x_usb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -3495,6 +3495,8 @@ static void hfa384x_int_rxmonitor(struct
WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)) {
pr_debug("overlen frm: len=%zd\n",
skblen - sizeof(struct p80211_caphdr));
+
+ return;
}
skb = dev_alloc_skb(skblen);
From: Johan Hovold <[email protected]>
commit 998912346c0da53a6dbb71fab3a138586b596b30 upstream.
Make sure to check that we have at least one endpoint before accessing
the endpoint array to avoid dereferencing a NULL-pointer on stream
start.
Note that these sanity checks are not redundant as the driver is mixing
looking up altsettings by index and by number, which need not coincide.
Fixes: 1876bb923c98 ("V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge")
Fixes: b282d87332f5 ("V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)")
Cc: stable <[email protected]> # 2.6.31
Cc: Hans de Goede <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/ov519.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/media/usb/gspca/ov519.c
+++ b/drivers/media/usb/gspca/ov519.c
@@ -3478,6 +3478,11 @@ static void ov511_mode_init_regs(struct
return;
}
+ if (alt->desc.bNumEndpoints < 1) {
+ sd->gspca_dev.usb_err = -ENODEV;
+ return;
+ }
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
@@ -3604,6 +3609,11 @@ static void ov518_mode_init_regs(struct
return;
}
+ if (alt->desc.bNumEndpoints < 1) {
+ sd->gspca_dev.usb_err = -ENODEV;
+ return;
+ }
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
From: Jiri Slaby <[email protected]>
commit dce05aa6eec977f1472abed95ccd71276b9a3864 upstream.
Avoid global variables (namely sel_cons) by introducing vc_is_sel. It
checks whether the parameter is the current selection console. This will
help putting sel_cons to a struct later.
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/selection.c | 5 +++++
drivers/tty/vt/vt.c | 7 ++++---
drivers/tty/vt/vt_ioctl.c | 2 +-
include/linux/selection.h | 4 +++-
4 files changed, 13 insertions(+), 5 deletions(-)
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -83,6 +83,11 @@ void clear_selection(void)
}
}
+bool vc_is_sel(struct vc_data *vc)
+{
+ return vc == sel_cons;
+}
+
/*
* User settable table: what characters are to be considered alphabetic?
* 128 bits. Locked by the console lock.
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -584,8 +584,9 @@ static void hide_softcursor(struct vc_da
static void hide_cursor(struct vc_data *vc)
{
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
+
vc->vc_sw->con_cursor(vc, CM_ERASE);
hide_softcursor(vc);
}
@@ -595,7 +596,7 @@ static void set_cursor(struct vc_data *v
if (!con_is_fg(vc) || console_blanked || vc->vc_mode == KD_GRAPHICS)
return;
if (vc->vc_deccm) {
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
add_softcursor(vc);
if ((vc->vc_cursor_type & 0x0f) != 1)
@@ -873,7 +874,7 @@ static int vc_do_resize(struct tty_struc
if (!newscreen)
return -ENOMEM;
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
old_rows = vc->vc_rows;
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -43,7 +43,7 @@ char vt_dont_switch;
extern struct tty_driver *console_driver;
#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
-#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_is_sel(vc_cons[i].d))
/*
* Console (vt and kd) routines, as defined by USL SVR4 manual, and by
--- a/include/linux/selection.h
+++ b/include/linux/selection.h
@@ -13,8 +13,8 @@
struct tty_struct;
-extern struct vc_data *sel_cons;
struct tty_struct;
+struct vc_data;
extern void clear_selection(void);
extern int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty);
@@ -23,6 +23,8 @@ extern int sel_loadlut(char __user *p);
extern int mouse_reporting(void);
extern void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry);
+bool vc_is_sel(struct vc_data *vc);
+
extern int console_blanked;
extern const unsigned char color_table[];
From: Eric Biggers <[email protected]>
commit 1aa6e058dd6cd04471b1f21298270014daf48ac9 upstream.
The vc_cons_allocated() checks in vt_ioctl() and vt_compat_ioctl() are
unnecessary because they can only be reached by calling ioctl() on an
open tty, which implies the corresponding virtual console is allocated.
And even if the virtual console *could* be freed concurrently, then
these checks would be broken since they aren't done under console_lock,
and the vc_data is dereferenced before them anyway.
So, remove these unneeded checks to avoid confusion.
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 21 ++-------------------
1 file changed, 2 insertions(+), 19 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -350,22 +350,13 @@ int vt_ioctl(struct tty_struct *tty,
{
struct vc_data *vc = tty->driver_data;
struct console_font_op op; /* used in multiple places here */
- unsigned int console;
+ unsigned int console = vc->vc_num;
unsigned char ucval;
unsigned int uival;
void __user *up = (void __user *)arg;
int i, perm;
int ret = 0;
- console = vc->vc_num;
-
-
- if (!vc_cons_allocated(console)) { /* impossible? */
- ret = -ENOIOCTLCMD;
- goto out;
- }
-
-
/*
* To have permissions to do most of the vt ioctls, we either have
* to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -1195,18 +1186,10 @@ long vt_compat_ioctl(struct tty_struct *
{
struct vc_data *vc = tty->driver_data;
struct console_font_op op; /* used in multiple places here */
- unsigned int console;
void __user *up = (void __user *)arg;
int perm;
int ret = 0;
- console = vc->vc_num;
-
- if (!vc_cons_allocated(console)) { /* impossible? */
- ret = -ENOIOCTLCMD;
- goto out;
- }
-
/*
* To have permissions to do most of the vt ioctls, we either have
* to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -1266,7 +1249,7 @@ long vt_compat_ioctl(struct tty_struct *
arg = (unsigned long)compat_ptr(arg);
goto fallback;
}
-out:
+
return ret;
fallback:
From: Eric Biggers <[email protected]>
commit a65cab7d7f05c2061a3e2490257d3086ff3202c6 upstream.
Reading from a debugfs file at a nonzero position, without first reading
at position 0, leaks uninitialized memory to userspace.
It's a bit tricky to do this, since lseek() and pread() aren't allowed
on these files, and write() doesn't update the position on them. But
writing to them with splice() *does* update the position:
#define _GNU_SOURCE 1
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
int main()
{
int pipes[2], fd, n, i;
char buf[32];
pipe(pipes);
write(pipes[1], "0", 1);
fd = open("/sys/kernel/debug/fault_around_bytes", O_RDWR);
splice(pipes[0], NULL, fd, NULL, 1, 0);
n = read(fd, buf, sizeof(buf));
for (i = 0; i < n; i++)
printf("%02x", buf[i]);
printf("\n");
}
Output:
5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a30
Fix the infoleak by making simple_attr_read() always fill
simple_attr::get_buf if it hasn't been filled yet.
Reported-by: [email protected]
Reported-by: Alexander Potapenko <[email protected]>
Fixes: acaefc25d21f ("[PATCH] libfs: add simple attribute files")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/libfs.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -802,7 +802,7 @@ int simple_attr_open(struct inode *inode
{
struct simple_attr *attr;
- attr = kmalloc(sizeof(*attr), GFP_KERNEL);
+ attr = kzalloc(sizeof(*attr), GFP_KERNEL);
if (!attr)
return -ENOMEM;
@@ -842,9 +842,11 @@ ssize_t simple_attr_read(struct file *fi
if (ret)
return ret;
- if (*ppos) { /* continued read */
+ if (*ppos && attr->get_buf[0]) {
+ /* continued read */
size = strlen(attr->get_buf);
- } else { /* first read */
+ } else {
+ /* first read */
u64 val;
ret = attr->get(attr->data, &val);
if (ret)
From: Marek Vasut <[email protected]>
commit 8262e6f9b1034ede34548a04dec4c302d92c9497 upstream.
This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it
turns out these were only necessary due to buggy hardware. This patch adds
a check for such a buggy hardware to prevent any such mistakes again.
While working further on the KS8851 driver, it came to light that the
KS8851-16MLL is capable of switching bus endianness by a hardware strap,
EESK pin. If this strap is incorrect, the IO accesses require such endian
swapping as is being reverted by this patch. Such swapping also impacts
the performance significantly.
Hence, in addition to removing it, detect that the hardware is broken,
report to user, and fail to bind with such hardware.
Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access")
Signed-off-by: Marek Vasut <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Lukas Wunner <[email protected]>
Cc: Petr Stetiar <[email protected]>
Cc: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/micrel/ks8851_mll.c | 56 ++++++++++++++++++++++++++++---
1 file changed, 52 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -475,6 +475,50 @@ static int msg_enable;
*/
/**
+ * ks_check_endian - Check whether endianness of the bus is correct
+ * @ks : The chip information
+ *
+ * The KS8851-16MLL EESK pin allows selecting the endianness of the 16bit
+ * bus. To maintain optimum performance, the bus endianness should be set
+ * such that it matches the endianness of the CPU.
+ */
+
+static int ks_check_endian(struct ks_net *ks)
+{
+ u16 cider;
+
+ /*
+ * Read CIDER register first, however read it the "wrong" way around.
+ * If the endian strap on the KS8851-16MLL in incorrect and the chip
+ * is operating in different endianness than the CPU, then the meaning
+ * of BE[3:0] byte-enable bits is also swapped such that:
+ * BE[3,2,1,0] becomes BE[1,0,3,2]
+ *
+ * Luckily for us, the byte-enable bits are the top four MSbits of
+ * the address register and the CIDER register is at offset 0xc0.
+ * Hence, by reading address 0xc0c0, which is not impacted by endian
+ * swapping, we assert either BE[3:2] or BE[1:0] while reading the
+ * CIDER register.
+ *
+ * If the bus configuration is correct, reading 0xc0c0 asserts
+ * BE[3:2] and this read returns 0x0000, because to read register
+ * with bottom two LSbits of address set to 0, BE[1:0] must be
+ * asserted.
+ *
+ * If the bus configuration is NOT correct, reading 0xc0c0 asserts
+ * BE[1:0] and this read returns non-zero 0x8872 value.
+ */
+ iowrite16(BE3 | BE2 | KS_CIDER, ks->hw_addr_cmd);
+ cider = ioread16(ks->hw_addr);
+ if (!cider)
+ return 0;
+
+ netdev_err(ks->netdev, "incorrect EESK endian strap setting\n");
+
+ return -EINVAL;
+}
+
+/**
* ks_rdreg16 - read 16 bit register from device
* @ks : The chip information
* @offset: The register address
@@ -484,7 +528,7 @@ static int msg_enable;
static u16 ks_rdreg16(struct ks_net *ks, int offset)
{
- ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
+ ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
return ioread16(ks->hw_addr);
}
@@ -499,7 +543,7 @@ static u16 ks_rdreg16(struct ks_net *ks,
static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
{
- ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
+ ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
iowrite16(value, ks->hw_addr);
}
@@ -515,7 +559,7 @@ static inline void ks_inblk(struct ks_ne
{
len >>= 1;
while (len--)
- *wptr++ = be16_to_cpu(ioread16(ks->hw_addr));
+ *wptr++ = (u16)ioread16(ks->hw_addr);
}
/**
@@ -529,7 +573,7 @@ static inline void ks_outblk(struct ks_n
{
len >>= 1;
while (len--)
- iowrite16(cpu_to_be16(*wptr++), ks->hw_addr);
+ iowrite16(*wptr++, ks->hw_addr);
}
static void ks_disable_int(struct ks_net *ks)
@@ -1539,6 +1583,10 @@ static int ks8851_probe(struct platform_
goto err_free;
}
+ err = ks_check_endian(ks);
+ if (err)
+ goto err_free;
+
netdev->irq = platform_get_irq(pdev, 0);
if ((int)netdev->irq < 0) {
From: Qiujun Huang <[email protected]>
commit 57aa9f294b09463492f604feaa5cc719beaace32 upstream.
Fix slab-out-of-bounds read in the interrupt-URB completion handler.
The boundary condition should be (length - 1) as we access
data[position + 1].
Reported-and-tested-by: [email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/io_edgeport.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -714,7 +714,7 @@ static void edge_interrupt_callback(stru
/* grab the txcredits for the ports if available */
position = 2;
portNumber = 0;
- while ((position < length) &&
+ while ((position < length - 1) &&
(portNumber < edge_serial->serial->num_ports)) {
txCredits = data[position] | (data[position+1] << 8);
if (txCredits) {
From: Nick Hudson <[email protected]>
commit 6687c201fdc3139315c2ea7ef96c157672805cdc upstream.
Define the sdhci pinctrl state as "default" so it gets applied
correctly and to match all other RPis.
Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Nick Hudson <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -118,6 +118,7 @@
&sdhci {
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
From: Georg Müller <[email protected]>
commit 95b31e35239e5e1689e3d965d692a313c71bd8ab upstream.
The Lex 2I385SW board has two Intel I211 ethernet controllers. Without
this patch, only the first port is usable. The second port fails to
start with the following message:
igb: probe of 0000:02:00.0 failed with error -2
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Tested-by: Georg Müller <[email protected]>
Signed-off-by: Georg Müller <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/pmc_atom.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -445,6 +445,14 @@ static const struct dmi_system_id critcl
},
{
/* pmc_plt_clk* - are used for ethernet controllers */
+ .ident = "Lex 2I385SW",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "2I385SW"),
+ },
+ },
+ {
+ /* pmc_plt_clk* - are used for ethernet controllers */
.ident = "Beckhoff CB3163",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
From: Greg Kroah-Hartman <[email protected]>
commit 8096f229421f7b22433775e928d506f0342e5907 upstream.
For the bpf syscall, we are relying on the compiler to properly zero out
the bpf_attr union that we copy userspace data into. Unfortunately that
doesn't always work properly, padding and other oddities might not be
correctly zeroed, and in some tests odd things have been found when the
stack is pre-initialized to other values.
Fix this by explicitly memsetting the structure to 0 before using it.
Reported-by: Maciej Żenczykowski <[email protected]>
Reported-by: John Stultz <[email protected]>
Reported-by: Alexander Potapenko <[email protected]>
Reported-by: Alistair Delva <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://android-review.googlesource.com/c/kernel/common/+/1235490
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/syscall.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1474,7 +1474,7 @@ static int bpf_obj_get_info_by_fd(const
SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, size)
{
- union bpf_attr attr = {};
+ union bpf_attr attr;
int err;
if (sysctl_unprivileged_bpf_disabled && !capable(CAP_SYS_ADMIN))
@@ -1486,6 +1486,7 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf
size = min_t(u32, size, sizeof(attr));
/* copy attributes from user space, may be less than sizeof(bpf_attr) */
+ memset(&attr, 0, sizeof(attr));
if (copy_from_user(&attr, uattr, size) != 0)
return -EFAULT;
From: Qiujun Huang <[email protected]>
commit a1f165a6b738f0c9d744bad4af7a53909278f5fc upstream.
We should cancel hw->usb_work before kfree(hw).
Reported-by: [email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/wlan-ng/prism2usb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -180,6 +180,7 @@ static void prism2sta_disconnect_usb(str
cancel_work_sync(&hw->link_bh);
cancel_work_sync(&hw->commsqual_bh);
+ cancel_work_sync(&hw->usb_work);
/* Now we complete any outstanding commands
* and tell everyone who is waiting for their
From: Ilie Halip <[email protected]>
commit 6f5459da2b8736720afdbd67c4bd2d1edba7d0e3 upstream.
Building an arm64 defconfig with clang's integrated assembler, this error
occurs:
<instantiation>:2:2: error: unrecognized instruction mnemonic
_ASM_EXTABLE 9999b, 9f
^
arch/arm64/mm/cache.S:50:1: note: while in macro instantiation
user_alt 9f, "dc cvau, x4", "dc civac, x4", 0
^
While GNU as seems fine with case-sensitive macro instantiations, clang
doesn't, so use the actual macro name (_asm_extable) as in the rest of
the file.
Also checked that the generated assembly matches the GCC output.
Reviewed-by: Nick Desaulniers <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Fixes: 290622efc76e ("arm64: fix "dc cvau" cache operation on errata-affected core")
Link: https://github.com/ClangBuiltLinux/linux/issues/924
Signed-off-by: Ilie Halip <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/alternative.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/include/asm/alternative.h
+++ b/arch/arm64/include/asm/alternative.h
@@ -216,7 +216,7 @@ alternative_endif
.macro user_alt, label, oldinstr, newinstr, cond
9999: alternative_insn "\oldinstr", "\newinstr", \cond
- _ASM_EXTABLE 9999b, \label
+ _asm_extable 9999b, \label
.endm
/*
From: Jiri Slaby <[email protected]>
commit e587e8f17433ddb26954f0edf5b2f95c42155ae9 upstream.
These two were macros. Switch them to static inlines, so that it's more
understandable what they are doing.
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 29 ++++++++++++++++++++++-------
1 file changed, 22 insertions(+), 7 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -40,10 +40,25 @@
#include <linux/selection.h>
char vt_dont_switch;
-extern struct tty_driver *console_driver;
-#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
-#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_is_sel(vc_cons[i].d))
+static inline bool vt_in_use(unsigned int i)
+{
+ extern struct tty_driver *console_driver;
+
+ return console_driver->ttys[i] && console_driver->ttys[i]->count;
+}
+
+static inline bool vt_busy(int i)
+{
+ if (vt_in_use(i))
+ return true;
+ if (i == fg_console)
+ return true;
+ if (vc_is_sel(vc_cons[i].d))
+ return true;
+
+ return false;
+}
/*
* Console (vt and kd) routines, as defined by USL SVR4 manual, and by
@@ -289,7 +304,7 @@ static int vt_disallocate(unsigned int v
int ret = 0;
console_lock();
- if (VT_BUSY(vc_num))
+ if (vt_busy(vc_num))
ret = -EBUSY;
else if (vc_num)
vc = vc_deallocate(vc_num);
@@ -311,7 +326,7 @@ static void vt_disallocate_all(void)
console_lock();
for (i = 1; i < MAX_NR_CONSOLES; i++)
- if (!VT_BUSY(i))
+ if (!vt_busy(i))
vc[i] = vc_deallocate(i);
else
vc[i] = NULL;
@@ -648,7 +663,7 @@ int vt_ioctl(struct tty_struct *tty,
state = 1; /* /dev/tty0 is always open */
for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
++i, mask <<= 1)
- if (VT_IS_IN_USE(i))
+ if (vt_in_use(i))
state |= mask;
ret = put_user(state, &vtstat->v_state);
}
@@ -661,7 +676,7 @@ int vt_ioctl(struct tty_struct *tty,
case VT_OPENQRY:
/* FIXME: locking ? - but then this is a stupid API */
for (i = 0; i < MAX_NR_CONSOLES; ++i)
- if (! VT_IS_IN_USE(i))
+ if (!vt_in_use(i))
break;
uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
goto setint;
From: Sungbo Eo <[email protected]>
commit deeabb4c1341a12bf8b599e6a2f4cfa4fd74738c upstream.
Disable all rps-irq interrupts during driver initialization to prevent
an accidental interrupt on GIC.
Fixes: 84316f4ef141 ("ARM: boot: dts: Add Oxford Semiconductor OX810SE dtsi")
Fixes: 38d4a53733f5 ("ARM: dts: Add support for OX820 and Pogoplug V3")
Signed-off-by: Sungbo Eo <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/ox810se.dtsi | 4 ++--
arch/arm/boot/dts/ox820.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -322,8 +322,8 @@
interrupt-controller;
reg = <0 0x200>;
#interrupt-cells = <1>;
- valid-mask = <0xFFFFFFFF>;
- clear-mask = <0>;
+ valid-mask = <0xffffffff>;
+ clear-mask = <0xffffffff>;
};
timer0: timer@200 {
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -239,8 +239,8 @@
reg = <0 0x200>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
- valid-mask = <0xFFFFFFFF>;
- clear-mask = <0>;
+ valid-mask = <0xffffffff>;
+ clear-mask = <0xffffffff>;
};
timer0: timer@200 {
From: Xin Long <[email protected]>
commit 171d449a028573b2f0acdc7f31ecbb045391b320 upstream.
It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) +
uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt),
in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str
later.
This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt).
Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_user.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -109,7 +109,8 @@ static inline int verify_sec_ctx_len(str
return 0;
uctx = nla_data(rt);
- if (uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len))
+ if (uctx->len > nla_len(rt) ||
+ uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len))
return -EINVAL;
return 0;
From: Larry Finger <[email protected]>
commit 38ef48f7d4b7342f145a1b4f96023bde99aeb245 upstream.
The ASUS USB-N10 Nano B1 has been reported as a new RTL8188EU device.
Add it to the device tables.
Signed-off-by: Larry Finger <[email protected]>
Reported-by: kovi <[email protected]>
Cc: Stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -40,6 +40,7 @@ static const struct usb_device_id rtw_us
/****** 8188EUS ********/
{USB_DEVICE(0x056e, 0x4008)}, /* Elecom WDC-150SU2M */
{USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
+ {USB_DEVICE(0x0B05, 0x18F0)}, /* ASUS USB-N10 Nano B1 */
{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
From: Hans de Goede <[email protected]>
commit 2ccb21f5516afef5e251184eeefbf36db90206d7 upstream.
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") was added to deal with spurious wakeups on one specific
model of the HP x2 10 series.
The approach taken there was to add a bool controlling wakeup support for
all ACPI GPIO events. This was sufficient for the specific HP x2 10 model
the commit was trying to fix, but in the mean time other models have
turned up which need a similar workaround to avoid spurious wakeups from
suspend, but only for one of the pins on which the ACPI tables request
ACPI GPIO events.
Since the honor_wakeup option was added to be able to ignore wake events,
the name was perhaps not the best, this commit renames it to ignore_wake
and changes it to a string with the following format:
gpiolib_acpi.ignore_wake=controller@pin[,controller@pin[,...]]
This allows working around spurious wakeup issues on a per pin basis.
This commit also reworks the existing quirk for the HP x2 10 so that
it functions as before.
Note:
-This removes the honor_wakeup parameter. This has only been upstream for
a short time and to the best of my knowledge there are no users using
this module parameter.
-The controller@pin[,controller@pin[,...]] syntax is based on an existing
kernel module parameter using the same controller@pin format. That version
uses ';' as separator, but in practice that is problematic because grub2
cannot handle this without taking special care to escape the ';', so here
we are using a ',' as separator instead which does not have this issue.
Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Mika Westerberg <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpiolib-acpi.c | 96 ++++++++++++++++++++++++++++++++++----------
1 file changed, 76 insertions(+), 20 deletions(-)
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -24,18 +24,21 @@
#include "gpiolib.h"
-#define QUIRK_NO_EDGE_EVENTS_ON_BOOT 0x01l
-#define QUIRK_NO_WAKEUP 0x02l
-
static int run_edge_events_on_boot = -1;
module_param(run_edge_events_on_boot, int, 0444);
MODULE_PARM_DESC(run_edge_events_on_boot,
"Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
-static int honor_wakeup = -1;
-module_param(honor_wakeup, int, 0444);
-MODULE_PARM_DESC(honor_wakeup,
- "Honor the ACPI wake-capable flag: 0=no, 1=yes, -1=auto");
+static char *ignore_wake;
+module_param(ignore_wake, charp, 0444);
+MODULE_PARM_DESC(ignore_wake,
+ "controller@pin combos on which to ignore the ACPI wake flag "
+ "ignore_wake=controller@pin[,controller@pin[,...]]");
+
+struct acpi_gpiolib_dmi_quirk {
+ bool no_edge_events_on_boot;
+ char *ignore_wake;
+};
/**
* struct acpi_gpio_event - ACPI GPIO event handler data
@@ -262,6 +265,57 @@ static void acpi_gpiochip_request_irqs(s
acpi_gpiochip_request_irq(acpi_gpio, event);
}
+static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
+{
+ const char *controller, *pin_str;
+ int len, pin;
+ char *endp;
+
+ controller = ignore_wake;
+ while (controller) {
+ pin_str = strchr(controller, '@');
+ if (!pin_str)
+ goto err;
+
+ len = pin_str - controller;
+ if (len == strlen(controller_in) &&
+ strncmp(controller, controller_in, len) == 0) {
+ pin = simple_strtoul(pin_str + 1, &endp, 10);
+ if (*endp != 0 && *endp != ',')
+ goto err;
+
+ if (pin == pin_in)
+ return true;
+ }
+
+ controller = strchr(controller, ',');
+ if (controller)
+ controller++;
+ }
+
+ return false;
+err:
+ pr_err_once("Error invalid value for gpiolib_acpi.ignore_wake: %s\n",
+ ignore_wake);
+ return false;
+}
+
+static bool acpi_gpio_irq_is_wake(struct device *parent,
+ struct acpi_resource_gpio *agpio)
+{
+ int pin = agpio->pin_table[0];
+
+ if (agpio->wake_capable != ACPI_WAKE_CAPABLE)
+ return false;
+
+ if (acpi_gpio_in_ignore_list(dev_name(parent), pin)) {
+ dev_info(parent, "Ignoring wakeup on pin %d\n", pin);
+ return false;
+ }
+
+ return true;
+}
+
static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
void *context)
{
@@ -347,7 +401,7 @@ static acpi_status acpi_gpiochip_alloc_e
event->handle = evt_handle;
event->handler = handler;
event->irq = irq;
- event->irq_is_wake = honor_wakeup && agpio->wake_capable == ACPI_WAKE_CAPABLE;
+ event->irq_is_wake = acpi_gpio_irq_is_wake(chip->parent, agpio);
event->pin = pin;
event->desc = desc;
@@ -1331,7 +1385,9 @@ static const struct dmi_system_id gpioli
DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
},
- .driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT,
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .no_edge_events_on_boot = true,
+ },
},
{
/*
@@ -1344,7 +1400,9 @@ static const struct dmi_system_id gpioli
DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
},
- .driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT,
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .no_edge_events_on_boot = true,
+ },
},
{
/*
@@ -1363,33 +1421,31 @@ static const struct dmi_system_id gpioli
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
},
- .driver_data = (void *)QUIRK_NO_WAKEUP,
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "INT33FF:01@0,INT0002:00@2",
+ },
},
{} /* Terminating entry */
};
static int acpi_gpio_setup_params(void)
{
+ const struct acpi_gpiolib_dmi_quirk *quirk = NULL;
const struct dmi_system_id *id;
- long quirks = 0;
id = dmi_first_match(gpiolib_acpi_quirks);
if (id)
- quirks = (long)id->driver_data;
+ quirk = id->driver_data;
if (run_edge_events_on_boot < 0) {
- if (quirks & QUIRK_NO_EDGE_EVENTS_ON_BOOT)
+ if (quirk && quirk->no_edge_events_on_boot)
run_edge_events_on_boot = 0;
else
run_edge_events_on_boot = 1;
}
- if (honor_wakeup < 0) {
- if (quirks & QUIRK_NO_WAKEUP)
- honor_wakeup = 0;
- else
- honor_wakeup = 1;
- }
+ if (ignore_wake == NULL && quirk && quirk->ignore_wake)
+ ignore_wake = quirk->ignore_wake;
return 0;
}
From: Mark Rutland <[email protected]>
commit 25dc2c80cfa33153057aa94984855acd57adf92a upstream.
The SPSR_ELx format for exceptions taken from AArch32 differs from the
AArch32 PSR format. Thus, we must translate between the two when setting
up a compat sigframe, or restoring context from a compat sigframe.
Signed-off-by: Mark Rutland <[email protected]>
Fixes: 7206dc93a58fb764 ("arm64: Expose Arm v8.4 features")
Cc: Catalin Marinas <[email protected]>
Cc: Suzuki Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/signal32.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -321,6 +321,7 @@ static int compat_restore_sigframe(struc
int err;
sigset_t set;
struct compat_aux_sigframe __user *aux;
+ unsigned long psr;
err = get_sigset_t(&set, &sf->uc.uc_sigmask);
if (err == 0) {
@@ -344,7 +345,9 @@ static int compat_restore_sigframe(struc
__get_user_error(regs->compat_sp, &sf->uc.uc_mcontext.arm_sp, err);
__get_user_error(regs->compat_lr, &sf->uc.uc_mcontext.arm_lr, err);
__get_user_error(regs->pc, &sf->uc.uc_mcontext.arm_pc, err);
- __get_user_error(regs->pstate, &sf->uc.uc_mcontext.arm_cpsr, err);
+ __get_user_error(psr, &sf->uc.uc_mcontext.arm_cpsr, err);
+
+ regs->pstate = compat_psr_to_pstate(psr);
/*
* Avoid compat_sys_sigreturn() restarting.
@@ -500,6 +503,7 @@ static int compat_setup_sigframe(struct
struct pt_regs *regs, sigset_t *set)
{
struct compat_aux_sigframe __user *aux;
+ unsigned long psr = pstate_to_compat_psr(regs->pstate);
int err = 0;
__put_user_error(regs->regs[0], &sf->uc.uc_mcontext.arm_r0, err);
@@ -518,7 +522,7 @@ static int compat_setup_sigframe(struct
__put_user_error(regs->compat_sp, &sf->uc.uc_mcontext.arm_sp, err);
__put_user_error(regs->compat_lr, &sf->uc.uc_mcontext.arm_lr, err);
__put_user_error(regs->pc, &sf->uc.uc_mcontext.arm_pc, err);
- __put_user_error(regs->pstate, &sf->uc.uc_mcontext.arm_cpsr, err);
+ __put_user_error(psr, &sf->uc.uc_mcontext.arm_cpsr, err);
__put_user_error((compat_ulong_t)0, &sf->uc.uc_mcontext.trap_no, err);
/* set the compat FSR WnR */
From: Johan Hovold <[email protected]>
commit f52981019ad8d6718de79b425a574c6bddf81f7c upstream.
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid submitting an URB to an invalid endpoint.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge Nova-TD")
Cc: stable <[email protected]> # 3.16
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb/dib0700_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -821,7 +821,7 @@ int dib0700_rc_setup(struct dvb_usb_devi
/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
- if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1)
+ if (intf->cur_altsetting->desc.bNumEndpoints < rc_ep + 1)
return -ENODEV;
purb = usb_alloc_urb(0, GFP_KERNEL);
@@ -841,7 +841,7 @@ int dib0700_rc_setup(struct dvb_usb_devi
* Some devices like the Hauppauge NovaTD model 52009 use an interrupt
* endpoint, while others use a bulk one.
*/
- e = &intf->altsetting[0].endpoint[rc_ep].desc;
+ e = &intf->cur_altsetting->endpoint[rc_ep].desc;
if (usb_endpoint_dir_in(e)) {
if (usb_endpoint_xfer_bulk(e)) {
pipe = usb_rcvbulkpipe(d->udev, rc_ep);
From: Emil Renner Berthing <[email protected]>
[ Upstream commit 9de9aa487daff7a5c73434c24269b44ed6a428e6 ]
Make sure we clean up devicetree related configuration
also when clock init fails.
Fixes: fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support")
Signed-off-by: Emil Renner Berthing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1362,7 +1362,7 @@ static int rk_gmac_probe(struct platform
ret = rk_gmac_clk_init(plat_dat);
if (ret)
- return ret;
+ goto err_remove_config_dt;
ret = rk_gmac_powerup(plat_dat->bsp_priv);
if (ret)
From: Taehee Yoo <[email protected]>
[ Upstream commit 3a303cfdd28d5f930a307c82e8a9d996394d5ebd ]
The port->hsr is used in the hsr_handle_frame(), which is a
callback of rx_handler.
hsr master and slaves are initialized in hsr_add_port().
This function initializes several pointers, which includes port->hsr after
registering rx_handler.
So, in the rx_handler routine, un-initialized pointer would be used.
In order to fix this, pointers should be initialized before
registering rx_handler.
Test commands:
ip netns del left
ip netns del right
modprobe -rv veth
modprobe -rv hsr
killall ping
modprobe hsr
ip netns add left
ip netns add right
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link add veth4 type veth peer name veth5
ip link set veth1 netns left
ip link set veth3 netns right
ip link set veth4 netns left
ip link set veth5 netns right
ip link set veth0 up
ip link set veth2 up
ip link set veth0 address fc:00:00:00:00:01
ip link set veth2 address fc:00:00:00:00:02
ip netns exec left ip link set veth1 up
ip netns exec left ip link set veth4 up
ip netns exec right ip link set veth3 up
ip netns exec right ip link set veth5 up
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4
ip netns exec left ip a a 192.168.100.2/24 dev hsr1
ip netns exec left ip link set hsr1 up
ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \
fc:00:00:00:00:01 nud permanent
ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \
fc:00:00:00:00:01 nud permanent
for i in {1..100}
do
ip netns exec left ping 192.168.100.1 &
done
ip netns exec left hping3 192.168.100.1 -2 --flood &
ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5
ip netns exec right ip a a 192.168.100.3/24 dev hsr2
ip netns exec right ip link set hsr2 up
ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \
fc:00:00:00:00:02 nud permanent
ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \
fc:00:00:00:00:02 nud permanent
for i in {1..100}
do
ip netns exec right ping 192.168.100.1 &
done
ip netns exec right hping3 192.168.100.1 -2 --flood &
while :
do
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip link del hsr0
done
Splat looks like:
[ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I
[ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460
[ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr]
[ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4
[ 120.966277][ C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206
[ 120.967293][ C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000
[ 120.968516][ C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000
[ 120.969718][ C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001
[ 120.972203][ C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000
[ 120.973379][ C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040
[ 120.974410][ C0] FS: 00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000
[ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 120.980773][ C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0
[ 120.981945][ C0] Call Trace:
[ 120.982411][ C0] <IRQ>
[ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr]
[ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0
[ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr]
[ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr]
[ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170
[ 120.992513][ C0] ? check_chain_key+0x236/0x5d0
[ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460
[ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0
[ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160
[ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160
[ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170
[ ... ]
Reported-by: [email protected]
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_slave.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/net/hsr/hsr_slave.c
+++ b/net/hsr/hsr_slave.c
@@ -152,16 +152,16 @@ int hsr_add_port(struct hsr_priv *hsr, s
if (port == NULL)
return -ENOMEM;
+ port->hsr = hsr;
+ port->dev = dev;
+ port->type = type;
+
if (type != HSR_PT_MASTER) {
res = hsr_portdev_setup(dev, port);
if (res)
goto fail_dev_setup;
}
- port->hsr = hsr;
- port->dev = dev;
- port->type = type;
-
list_add_tail_rcu(&port->port_list, &hsr->ports);
synchronize_rcu();
From: Jiri Kosina <[email protected]>
commit 074376ac0e1d1fcd4fafebca86ee6158e7c20680 upstream.
ftrace_arch_code_modify_prepare() is acquiring text_mutex, while the
corresponding release is happening in ftrace_arch_code_modify_post_process().
This has already been documented in the code, but let's also make the fact
that this is intentional clear to the semantic analysis tools such as sparse.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 39611265edc1a ("ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()")
Fixes: d5b844a2cf507 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()")
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/ftrace.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -36,6 +36,7 @@
#ifdef CONFIG_DYNAMIC_FTRACE
int ftrace_arch_code_modify_prepare(void)
+ __acquires(&text_mutex)
{
mutex_lock(&text_mutex);
set_kernel_text_rw();
@@ -44,6 +45,7 @@ int ftrace_arch_code_modify_prepare(void
}
int ftrace_arch_code_modify_post_process(void)
+ __releases(&text_mutex)
{
set_all_modules_text_ro();
set_kernel_text_ro();
From: Matthias Reichl <[email protected]>
commit 62d65bdd9d05158aa2547f8ef72375535f3bc6e3 upstream.
commit b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL")
introduced a regression by changing the order of capability and close
settings change checks. When running with CAP_SYS_ADMIN setting the
close settings to the values already set resulted in -EOPNOTSUPP.
Fix this by changing the check order back to how it was before.
Fixes: b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL")
Cc: Anthony Mallet <[email protected]>
Cc: stable <[email protected]>
Cc: Oliver Neukum <[email protected]>
Signed-off-by: Matthias Reichl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -961,16 +961,16 @@ static int set_serial_info(struct acm *a
mutex_lock(&acm->port.mutex);
- if ((new_serial.close_delay != old_close_delay) ||
- (new_serial.closing_wait != old_closing_wait)) {
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((new_serial.close_delay != old_close_delay) ||
+ (new_serial.closing_wait != old_closing_wait))
retval = -EPERM;
- else {
- acm->port.close_delay = close_delay;
- acm->port.closing_wait = closing_wait;
- }
- } else
- retval = -EOPNOTSUPP;
+ else
+ retval = -EOPNOTSUPP;
+ } else {
+ acm->port.close_delay = close_delay;
+ acm->port.closing_wait = closing_wait;
+ }
mutex_unlock(&acm->port.mutex);
return retval;
From: Madalin Bucur <[email protected]>
[ Upstream commit b281f7b93b258ce1419043bbd898a29254d5c9c7 ]
Detect the presence of the A050385 erratum.
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/fman/Kconfig | 28 +++++++++++++++++++++
drivers/net/ethernet/freescale/fman/fman.c | 18 +++++++++++++
drivers/net/ethernet/freescale/fman/fman.h | 5 ++++
3 files changed, 51 insertions(+)
diff --git a/drivers/net/ethernet/freescale/fman/Kconfig b/drivers/net/ethernet/freescale/fman/Kconfig
index 8870a9a798ca4..91437b94bfcb6 100644
--- a/drivers/net/ethernet/freescale/fman/Kconfig
+++ b/drivers/net/ethernet/freescale/fman/Kconfig
@@ -8,3 +8,31 @@ config FSL_FMAN
help
Freescale Data-Path Acceleration Architecture Frame Manager
(FMan) support
+
+config DPAA_ERRATUM_A050385
+ bool
+ depends on ARM64 && FSL_DPAA
+ default y
+ help
+ DPAA FMan erratum A050385 software workaround implementation:
+ align buffers, data start, SG fragment length to avoid FMan DMA
+ splits.
+ FMAN DMA read or writes under heavy traffic load may cause FMAN
+ internal resource leak thus stopping further packet processing.
+ The FMAN internal queue can overflow when FMAN splits single
+ read or write transactions into multiple smaller transactions
+ such that more than 17 AXI transactions are in flight from FMAN
+ to interconnect. When the FMAN internal queue overflows, it can
+ stall further packet processing. The issue can occur with any
+ one of the following three conditions:
+ 1. FMAN AXI transaction crosses 4K address boundary (Errata
+ A010022)
+ 2. FMAN DMA address for an AXI transaction is not 16 byte
+ aligned, i.e. the last 4 bits of an address are non-zero
+ 3. Scatter Gather (SG) frames have more than one SG buffer in
+ the SG list and any one of the buffers, except the last
+ buffer in the SG list has data size that is not a multiple
+ of 16 bytes, i.e., other than 16, 32, 48, 64, etc.
+ With any one of the above three conditions present, there is
+ likelihood of stalled FMAN packet processing, especially under
+ stress with multiple ports injecting line-rate traffic.
diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c
index 97425d94e280d..9080d2332d030 100644
--- a/drivers/net/ethernet/freescale/fman/fman.c
+++ b/drivers/net/ethernet/freescale/fman/fman.c
@@ -1,5 +1,6 @@
/*
* Copyright 2008-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -566,6 +567,10 @@ struct fman_cfg {
u32 qmi_def_tnums_thresh;
};
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+static bool fman_has_err_a050385;
+#endif
+
static irqreturn_t fman_exceptions(struct fman *fman,
enum fman_exceptions exception)
{
@@ -2517,6 +2522,14 @@ struct fman *fman_bind(struct device *fm_dev)
}
EXPORT_SYMBOL(fman_bind);
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+bool fman_has_errata_a050385(void)
+{
+ return fman_has_err_a050385;
+}
+EXPORT_SYMBOL(fman_has_errata_a050385);
+#endif
+
static irqreturn_t fman_err_irq(int irq, void *handle)
{
struct fman *fman = (struct fman *)handle;
@@ -2843,6 +2856,11 @@ static struct fman *read_dts_node(struct platform_device *of_dev)
goto fman_free;
}
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+ fman_has_err_a050385 =
+ of_property_read_bool(fm_node, "fsl,erratum-a050385");
+#endif
+
return fman;
fman_node_put:
diff --git a/drivers/net/ethernet/freescale/fman/fman.h b/drivers/net/ethernet/freescale/fman/fman.h
index bfa02e0014ae0..693401994fa2d 100644
--- a/drivers/net/ethernet/freescale/fman/fman.h
+++ b/drivers/net/ethernet/freescale/fman/fman.h
@@ -1,5 +1,6 @@
/*
* Copyright 2008-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -397,6 +398,10 @@ u16 fman_get_max_frm(void);
int fman_get_rx_extra_headroom(void);
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+bool fman_has_errata_a050385(void);
+#endif
+
struct fman *fman_bind(struct device *dev);
#endif /* __FM_H */
--
2.20.1
From: Michael Straube <[email protected]>
commit bb5786b9286c253557a0115bc8d21879e61b7b94 upstream.
This device was added to the stand-alone driver on github.
Add it to the staging driver as well.
Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7
Signed-off-by: Michael Straube <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -46,6 +46,7 @@ static const struct usb_device_id rtw_us
{USB_DEVICE(0x2001, 0x331B)}, /* D-Link DWA-121 rev B1 */
{USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */
{USB_DEVICE(0x2357, 0x0111)}, /* TP-Link TL-WN727N v5.21 */
+ {USB_DEVICE(0x2C4E, 0x0102)}, /* MERCUSYS MW150US v2 */
{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
{USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */
{} /* Terminating entry */
From: Vlastimil Babka <[email protected]>
commit 0715e6c516f106ed553828a671d30ad9a3431536 upstream.
Sachin reports [1] a crash in SLUB __slab_alloc():
BUG: Kernel NULL pointer dereference on read at 0x000073b0
Faulting instruction address: 0xc0000000003d55f4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-20200218-autotest #1
NIP: c0000000003d55f4 LR: c0000000003d5b94 CTR: 0000000000000000
REGS: c0000008b37836d0 TRAP: 0300 Not tainted (5.6.0-rc2-next-20200218-autotest)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24004844 XER: 00000000
CFAR: c00000000000dec4 DAR: 00000000000073b0 DSISR: 40000000 IRQMASK: 1
GPR00: c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500
GPR04: 0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620
GPR08: 00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000
GPR12: 0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000
GPR16: c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002
GPR20: c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122
GPR24: 0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8
GPR28: c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180
NIP ___slab_alloc+0x1f4/0x760
LR __slab_alloc+0x34/0x60
Call Trace:
___slab_alloc+0x334/0x760 (unreliable)
__slab_alloc+0x34/0x60
__kmalloc_node+0x110/0x490
kvmalloc_node+0x58/0x110
mem_cgroup_css_online+0x108/0x270
online_css+0x48/0xd0
cgroup_apply_control_enable+0x2ec/0x4d0
cgroup_mkdir+0x228/0x5f0
kernfs_iop_mkdir+0x90/0xf0
vfs_mkdir+0x110/0x230
do_mkdirat+0xb0/0x1a0
system_call+0x5c/0x68
This is a PowerPC platform with following NUMA topology:
available: 2 nodes (0-1)
node 0 cpus:
node 0 size: 0 MB
node 0 free: 0 MB
node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 1 size: 35247 MB
node 1 free: 30907 MB
node distances:
node 0 1
0: 10 40
1: 40 10
possible numa nodes: 0-31
This only happens with a mmotm patch "mm/memcontrol.c: allocate
shrinker_map on appropriate NUMA node" [2] which effectively calls
kmalloc_node for each possible node. SLUB however only allocates
kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on
node_to_mem_node to return such valid node for other nodes since commit
a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating
on memoryless node"). This is however not true in this configuration
where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31,
thus it contains zeroes and get_partial() ends up accessing
non-allocated kmem_cache_node.
A related issue was reported by Bharata (originally by Ramachandran) [3]
where a similar PowerPC configuration, but with mainline kernel without
patch [2] ends up allocating large amounts of pages by kmalloc-1k
kmalloc-512. This seems to have the same underlying issue with
node_to_mem_node() not behaving as expected, and might probably also
lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4].
This patch should fix both issues by not relying on node_to_mem_node()
anymore and instead simply falling back to NUMA_NO_NODE, when
kmalloc_node(node) is attempted for a node that's not online, or has no
usable memory. The "usable memory" condition is also changed from
node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly
the condition that SLUB uses to allocate kmem_cache_node structures.
The check in get_partial() is removed completely, as the checks in
___slab_alloc() are now sufficient to prevent get_partial() being
reached with an invalid node.
[1] https://lore.kernel.org/linux-next/[email protected]/
[2] https://lore.kernel.org/linux-mm/[email protected]/
[3] https://lore.kernel.org/linux-mm/[email protected]/
[4] https://lore.kernel.org/linux-mm/[email protected]/
Fixes: a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node")
Reported-by: Sachin Sant <[email protected]>
Reported-by: PUVICHAKRAVARTHY RAMACHANDRAN <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Sachin Sant <[email protected]>
Tested-by: Bharata B Rao <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Christopher Lameter <[email protected]>
Cc: [email protected]
Cc: Joonsoo Kim <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Kirill Tkhai <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Nathan Lynch <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Debugged-by: Srikar Dronamraju <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slub.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1923,8 +1923,6 @@ static void *get_partial(struct kmem_cac
if (node == NUMA_NO_NODE)
searchnode = numa_mem_id();
- else if (!node_present_pages(node))
- searchnode = node_to_mem_node(node);
object = get_partial_node(s, get_node(s, searchnode), c, flags);
if (object || node != NUMA_NO_NODE)
@@ -2521,17 +2519,27 @@ static void *___slab_alloc(struct kmem_c
struct page *page;
page = c->page;
- if (!page)
+ if (!page) {
+ /*
+ * if the node is not online or has no normal memory, just
+ * ignore the node constraint
+ */
+ if (unlikely(node != NUMA_NO_NODE &&
+ !node_state(node, N_NORMAL_MEMORY)))
+ node = NUMA_NO_NODE;
goto new_slab;
+ }
redo:
if (unlikely(!node_match(page, node))) {
- int searchnode = node;
-
- if (node != NUMA_NO_NODE && !node_present_pages(node))
- searchnode = node_to_mem_node(node);
-
- if (unlikely(!node_match(page, searchnode))) {
+ /*
+ * same as above but node_match() being false already
+ * implies node != NUMA_NO_NODE
+ */
+ if (!node_state(node, N_NORMAL_MEMORY)) {
+ node = NUMA_NO_NODE;
+ goto redo;
+ } else {
stat(s, ALLOC_NODE_MISMATCH);
deactivate_slab(s, page, c->freelist, c);
goto new_slab;
From: Xin Long <[email protected]>
commit a1a7e3a36e01ca6e67014f8cf673cb8e47be5550 upstream.
Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be
out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by
syz:
BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430
Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650
Call Trace:
dump_stack+0xe8/0x16e
print_address_description.cold.3+0x9/0x23b
kasan_report.cold.4+0x64/0x95
memcpy+0x1f/0x50
selinux_xfrm_alloc_user+0x237/0x430
security_xfrm_policy_alloc+0x5c/0xb0
xfrm_policy_construct+0x2b1/0x650
xfrm_add_acquire+0x21d/0xa10
xfrm_user_rcv_msg+0x431/0x6f0
netlink_rcv_skb+0x15a/0x410
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x50e/0x6a0
netlink_sendmsg+0x8ae/0xd40
sock_sendmsg+0x133/0x170
___sys_sendmsg+0x834/0x9a0
__sys_sendmsg+0x100/0x1e0
do_syscall_64+0xe5/0x660
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
So fix it by adding the missing verify_sec_ctx_len check there.
Fixes: 980ebd25794f ("[IPSEC]: Sync series - acquire insert")
Reported-by: Hangbin Liu <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_user.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -2214,6 +2214,9 @@ static int xfrm_add_acquire(struct sk_bu
err = verify_newpolicy_info(&ua->policy);
if (err)
goto free_state;
+ err = verify_sec_ctx_len(attrs);
+ if (err)
+ goto free_state;
/* build an XP */
xp = xfrm_policy_construct(net, &ua->policy, attrs, &err);
From: Carlo Nonato <[email protected]>
[ Upstream commit 14afc59361976c0ba39e3a9589c3eaa43ebc7e1d ]
The bfq_find_set_group() function takes as input a blkcg (which represents
a cgroup) and retrieves the corresponding bfq_group, then it updates the
bfq internal group hierarchy (see comments inside the function for why
this is needed) and finally it returns the bfq_group.
In the hierarchy update cycle, the pointer holding the correct bfq_group
that has to be returned is mistakenly used to traverse the hierarchy
bottom to top, meaning that in each iteration it gets overwritten with the
parent of the current group. Since the update cycle stops at root's
children (depth = 2), the overwrite becomes a problem only if the blkcg
describes a cgroup at a hierarchy level deeper than that (depth > 2). In
this case the root's child that happens to be also an ancestor of the
correct bfq_group is returned. The main consequence is that processes
contained in a cgroup at depth greater than 2 are wrongly placed in the
group described above by BFQ.
This commits fixes this problem by using a different bfq_group pointer in
the update cycle in order to avoid the overwrite of the variable holding
the original group reference.
Reported-by: Kwon Je Oh <[email protected]>
Signed-off-by: Carlo Nonato <[email protected]>
Signed-off-by: Paolo Valente <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-cgroup.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c
index afbbe5750a1f8..7d7aee024ece2 100644
--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -499,12 +499,13 @@ struct bfq_group *bfq_find_set_group(struct bfq_data *bfqd,
*/
entity = &bfqg->entity;
for_each_entity(entity) {
- bfqg = container_of(entity, struct bfq_group, entity);
- if (bfqg != bfqd->root_group) {
- parent = bfqg_parent(bfqg);
+ struct bfq_group *curr_bfqg = container_of(entity,
+ struct bfq_group, entity);
+ if (curr_bfqg != bfqd->root_group) {
+ parent = bfqg_parent(curr_bfqg);
if (!parent)
parent = bfqd->root_group;
- bfq_group_set_parent(bfqg, parent);
+ bfq_group_set_parent(curr_bfqg, parent);
}
}
--
2.20.1
From: Daniele Palmas <[email protected]>
commit 8e852a7953be2a6ee371449f7257fe15ace6a1fc upstream.
Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm
Signed-off-by: Daniele Palmas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1186,6 +1186,8 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110a, 0xff), /* Telit ME910G1 */
.driver_info = NCTRL(0) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110b, 0xff), /* Telit ME910G1 (ECM) */
+ .driver_info = NCTRL(0) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
From: Chunguang Xu <[email protected]>
commit 7d36665a5886c27ca4c4d0afd3ecc50b400f3587 upstream.
An eventfd monitors multiple memory thresholds of the cgroup, closes them,
the kernel deletes all events related to this eventfd. Before all events
are deleted, another eventfd monitors the memory threshold of this cgroup,
leading to a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000004
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 800000033058e067 P4D 800000033058e067 PUD 3355ce067 PMD 0
Oops: 0002 [#1] SMP PTI
CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3
Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014
Workqueue: events memcg_event_remove
RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190
RSP: 0018:ffffb47e01c4fe18 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff8bb223a8a000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffff8bb22fb83540 RDI: 0000000000000001
RBP: ffffb47e01c4fe48 R08: 0000000000000000 R09: 0000000000000010
R10: 000000000000000c R11: 071c71c71c71c71c R12: ffff8bb226aba880
R13: ffff8bb223a8a480 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8bb242680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000004 CR3: 000000032c29c003 CR4: 00000000001606e0
Call Trace:
memcg_event_remove+0x32/0x90
process_one_work+0x172/0x380
worker_thread+0x49/0x3f0
kthread+0xf8/0x130
ret_from_fork+0x35/0x40
CR2: 0000000000000004
We can reproduce this problem in the following ways:
1. We create a new cgroup subdirectory and a new eventfd, and then we
monitor multiple memory thresholds of the cgroup through this eventfd.
2. closing this eventfd, and __mem_cgroup_usage_unregister_event ()
will be called multiple times to delete all events related to this
eventfd.
The first time __mem_cgroup_usage_unregister_event() is called, the
kernel will clear all items related to this eventfd in thresholds->
primary.
Since there is currently only one eventfd, thresholds-> primary becomes
empty, so the kernel will set thresholds-> primary and hresholds-> spare
to NULL. If at this time, the user creates a new eventfd and monitor
the memory threshold of this cgroup, kernel will re-initialize
thresholds-> primary.
Then when __mem_cgroup_usage_unregister_event () is called for the
second time, because thresholds-> primary is not empty, the system will
access thresholds-> spare, but thresholds-> spare is NULL, which will
trigger a crash.
In general, the longer it takes to delete all events related to this
eventfd, the easier it is to trigger this problem.
The solution is to check whether the thresholds associated with the
eventfd has been cleared when deleting the event. If so, we do nothing.
[[email protected]: fix comment, per Kirill]
Fixes: 907860ed381a ("cgroups: make cftype.unregister_event() void-returning")
Signed-off-by: Chunguang Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memcontrol.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3518,7 +3518,7 @@ static void __mem_cgroup_usage_unregiste
struct mem_cgroup_thresholds *thresholds;
struct mem_cgroup_threshold_ary *new;
unsigned long usage;
- int i, j, size;
+ int i, j, size, entries;
mutex_lock(&memcg->thresholds_lock);
@@ -3538,14 +3538,20 @@ static void __mem_cgroup_usage_unregiste
__mem_cgroup_threshold(memcg, type == _MEMSWAP);
/* Calculate new number of threshold */
- size = 0;
+ size = entries = 0;
for (i = 0; i < thresholds->primary->size; i++) {
if (thresholds->primary->entries[i].eventfd != eventfd)
size++;
+ else
+ entries++;
}
new = thresholds->spare;
+ /* If no items related to eventfd have been cleared, nothing to do */
+ if (!entries)
+ goto unlock;
+
/* Set thresholds array to NULL if we don't have thresholds */
if (!size) {
kfree(new);
From: Willem de Bruijn <[email protected]>
[ Upstream commit 61fad6816fc10fb8793a925d5c1256d1c3db0cd2 ]
PACKET_RX_RING can cause multiple writers to access the same slot if a
fast writer wraps the ring while a slow writer is still copying. This
is particularly likely with few, large, slots (e.g., GSO packets).
Synchronize kernel thread ownership of rx ring slots with a bitmap.
Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL
while holding the sk receive queue lock. They release this lock before
copying and set tp_status to TP_STATUS_USER to release to userspace
when done. During copying, another writer may take the lock, also see
TP_STATUS_KERNEL, and start writing to the same slot.
Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a
slot, test and set with the lock held. To release race-free, update
tp_status and owner bit as a transaction, so take the lock again.
This is the one of a variety of discussed options (see Link below):
* instead of a shadow ring, embed the data in the slot itself, such as
in tp_padding. But any test for this field may match a value left by
userspace, causing deadlock.
* avoid the lock on release. This leaves a small race if releasing the
shadow slot before setting TP_STATUS_USER. The below reproducer showed
that this race is not academic. If releasing the slot after tp_status,
the race is more subtle. See the first link for details.
* add a new tp_status TP_KERNEL_OWNED to avoid the transactional store
of two fields. But, legacy applications may interpret all non-zero
tp_status as owned by the user. As libpcap does. So this is possible
only opt-in by newer processes. It can be added as an optional mode.
* embed the struct at the tail of pg_vec to avoid extra allocation.
The implementation proved no less complex than a separate field.
The additional locking cost on release adds contention, no different
than scaling on multicore or multiqueue h/w. In practice, below
reproducer nor small packet tcpdump showed a noticeable change in
perf report in cycles spent in spinlock. Where contention is
problematic, packet sockets support mitigation through PACKET_FANOUT.
And we can consider adding opt-in state TP_KERNEL_OWNED.
Easy to reproduce by running multiple netperf or similar TCP_STREAM
flows concurrently with `tcpdump -B 129 -n greater 60000`.
Based on an earlier patchset by Jon Rosen. See links below.
I believe this issue goes back to the introduction of tpacket_rcv,
which predates git history.
Link: https://www.mail-archive.com/[email protected]/msg237222.html
Suggested-by: Jon Rosen <[email protected]>
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: Jon Rosen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/packet/af_packet.c | 21 +++++++++++++++++++++
net/packet/internal.h | 5 ++++-
2 files changed, 25 insertions(+), 1 deletion(-)
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2204,6 +2204,7 @@ static int tpacket_rcv(struct sk_buff *s
struct timespec ts;
__u32 ts_status;
bool is_drop_n_account = false;
+ unsigned int slot_id = 0;
bool do_vnet = false;
/* struct tpacket{2,3}_hdr is aligned to a multiple of TPACKET_ALIGNMENT.
@@ -2300,6 +2301,13 @@ static int tpacket_rcv(struct sk_buff *s
if (!h.raw)
goto drop_n_account;
+ if (po->tp_version <= TPACKET_V2) {
+ slot_id = po->rx_ring.head;
+ if (test_bit(slot_id, po->rx_ring.rx_owner_map))
+ goto drop_n_account;
+ __set_bit(slot_id, po->rx_ring.rx_owner_map);
+ }
+
if (do_vnet &&
virtio_net_hdr_from_skb(skb, h.raw + macoff -
sizeof(struct virtio_net_hdr),
@@ -2405,7 +2413,10 @@ static int tpacket_rcv(struct sk_buff *s
#endif
if (po->tp_version <= TPACKET_V2) {
+ spin_lock(&sk->sk_receive_queue.lock);
__packet_set_status(po, h.raw, status);
+ __clear_bit(slot_id, po->rx_ring.rx_owner_map);
+ spin_unlock(&sk->sk_receive_queue.lock);
sk->sk_data_ready(sk);
} else {
prb_clear_blk_fill_status(&po->rx_ring);
@@ -4298,6 +4309,7 @@ static int packet_set_ring(struct sock *
{
struct pgv *pg_vec = NULL;
struct packet_sock *po = pkt_sk(sk);
+ unsigned long *rx_owner_map = NULL;
int was_running, order = 0;
struct packet_ring_buffer *rb;
struct sk_buff_head *rb_queue;
@@ -4383,6 +4395,12 @@ static int packet_set_ring(struct sock *
}
break;
default:
+ if (!tx_ring) {
+ rx_owner_map = bitmap_alloc(req->tp_frame_nr,
+ GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO);
+ if (!rx_owner_map)
+ goto out_free_pg_vec;
+ }
break;
}
}
@@ -4412,6 +4430,8 @@ static int packet_set_ring(struct sock *
err = 0;
spin_lock_bh(&rb_queue->lock);
swap(rb->pg_vec, pg_vec);
+ if (po->tp_version <= TPACKET_V2)
+ swap(rb->rx_owner_map, rx_owner_map);
rb->frame_max = (req->tp_frame_nr - 1);
rb->head = 0;
rb->frame_size = req->tp_frame_size;
@@ -4443,6 +4463,7 @@ static int packet_set_ring(struct sock *
}
out_free_pg_vec:
+ bitmap_free(rx_owner_map);
if (pg_vec)
free_pg_vec(pg_vec, order, req->tp_block_nr);
out:
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
@@ -70,7 +70,10 @@ struct packet_ring_buffer {
unsigned int __percpu *pending_refcnt;
- struct tpacket_kbdq_core prb_bdqc;
+ union {
+ unsigned long *rx_owner_map;
+ struct tpacket_kbdq_core prb_bdqc;
+ };
};
extern struct mutex fanout_mutex;
From: Daniel Axtens <[email protected]>
[ Upstream commit 3745488e9d599916a0b40d45d3f30e3d4720288e ]
altera_get_note is called from altera_init, where key is kzalloc(33).
When the allocation functions are annotated to allow the compiler to see
the sizes of objects, and with FORTIFY_SOURCE, we see:
In file included from drivers/misc/altera-stapl/altera.c:14:0:
In function ‘strlcpy’,
inlined from ‘altera_init’ at drivers/misc/altera-stapl/altera.c:2189:5:
include/linux/string.h:378:4: error: call to ‘__write_overflow’ declared with attribute error: detected write beyond size of object passed as 1st parameter
__write_overflow();
^~~~~~~~~~~~~~~~~~
That refers to this code in altera_get_note:
if (key != NULL)
strlcpy(key, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i)])],
length);
The error triggers because the length of 'key' is 33, but the copy
uses length supplied as the 'length' parameter, which is always
256. Split the size parameter into key_len and val_len, and use the
appropriate length depending on what is being copied.
Detected by compiler error, only compile-tested.
Cc: "Igor M. Liplianin" <[email protected]>
Signed-off-by: Daniel Axtens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/202002251042.D898E67AC@keescook
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/altera-stapl/altera.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/altera-stapl/altera.c b/drivers/misc/altera-stapl/altera.c
index 494e263daa748..b7ee8043a133e 100644
--- a/drivers/misc/altera-stapl/altera.c
+++ b/drivers/misc/altera-stapl/altera.c
@@ -2126,8 +2126,8 @@ static int altera_execute(struct altera_state *astate,
return status;
}
-static int altera_get_note(u8 *p, s32 program_size,
- s32 *offset, char *key, char *value, int length)
+static int altera_get_note(u8 *p, s32 program_size, s32 *offset,
+ char *key, char *value, int keylen, int vallen)
/*
* Gets key and value of NOTE fields in the JBC file.
* Can be called in two modes: if offset pointer is NULL,
@@ -2184,7 +2184,7 @@ static int altera_get_note(u8 *p, s32 program_size,
&p[note_table + (8 * i) + 4])];
if (value != NULL)
- strlcpy(value, value_ptr, length);
+ strlcpy(value, value_ptr, vallen);
}
}
@@ -2203,13 +2203,13 @@ static int altera_get_note(u8 *p, s32 program_size,
strlcpy(key, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i)])],
- length);
+ keylen);
if (value != NULL)
strlcpy(value, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i) + 4])],
- length);
+ vallen);
*offset = i + 1;
}
@@ -2463,7 +2463,7 @@ int altera_init(struct altera_config *config, const struct firmware *fw)
__func__, (format_version == 2) ? "Jam STAPL" :
"pre-standardized Jam 1.1");
while (altera_get_note((u8 *)fw->data, fw->size,
- &offset, key, value, 256) == 0)
+ &offset, key, value, 32, 256) == 0)
printk(KERN_INFO "%s: NOTE \"%s\" = \"%s\"\n",
__func__, key, value);
}
--
2.20.1
From: Corentin Labbe <[email protected]>
commit 5d892919fdd0cefd361697472d4e1b174a594991 upstream.
I have hit the following build error:
armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'
max8907 should select REGMAP_IRQ
Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver")
Cc: stable <[email protected]>
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -323,6 +323,7 @@ config RTC_DRV_MAX6900
config RTC_DRV_MAX8907
tristate "Maxim MAX8907"
depends on MFD_MAX8907 || COMPILE_TEST
+ select REGMAP_IRQ
help
If you say yes here you will get support for the
RTC of Maxim MAX8907 PMIC.
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 27f13774654ea6bd0b6fc9b97cce8d19e5735661 ]
'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI
devices not described in the DT. Certain DRA7 platforms (e.g., DRA76)
has RAM above 32-bit boundary (accessible with LPAE config) though the
PCIe bridge will be able to access only 32-bits. Add 'dma-ranges'
property in PCIe RC DT nodes to indicate the host bridge can access
only 32 bits.
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/dra7.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index fec965009b9fc..a40a7af85d020 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -302,6 +302,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@@ -356,6 +357,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
--
2.20.1
From: Scott Chen <[email protected]>
commit cecc113c1af0dd41ccf265c1fdb84dbd05e63423 upstream.
Add a device id for HP LD381 Display
LD381: 03f0:0f7f
Signed-off-by: Scott Chen <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -96,6 +96,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -129,6 +129,7 @@
#define HP_LM920_PRODUCT_ID 0x026b
#define HP_TD620_PRODUCT_ID 0x0956
#define HP_LD960_PRODUCT_ID 0x0b39
+#define HP_LD381_PRODUCT_ID 0x0f7f
#define HP_LCM220_PRODUCT_ID 0x3139
#define HP_LCM960_PRODUCT_ID 0x3239
#define HP_LD220_PRODUCT_ID 0x3524
From: Takashi Iwai <[email protected]>
commit 5461e0530c222129dfc941058be114b5cbc00837 upstream.
The return value checks in snd_pcm_plug_alloc() are covered with
snd_BUG_ON() macro that may trigger a kernel WARNING depending on the
kconfig. But since the error condition can be triggered by a weird
user space parameter passed to OSS layer, we shouldn't give the kernel
stack trace just for that. As it's a normal error condition, let's
remove snd_BUG_ON() macro usage there.
Reported-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/oss/pcm_plugin.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -111,7 +111,7 @@ int snd_pcm_plug_alloc(struct snd_pcm_su
while (plugin->next) {
if (plugin->dst_frames)
frames = plugin->dst_frames(plugin, frames);
- if (snd_BUG_ON((snd_pcm_sframes_t)frames <= 0))
+ if ((snd_pcm_sframes_t)frames <= 0)
return -ENXIO;
plugin = plugin->next;
err = snd_pcm_plugin_alloc(plugin, frames);
@@ -123,7 +123,7 @@ int snd_pcm_plug_alloc(struct snd_pcm_su
while (plugin->prev) {
if (plugin->src_frames)
frames = plugin->src_frames(plugin, frames);
- if (snd_BUG_ON((snd_pcm_sframes_t)frames <= 0))
+ if ((snd_pcm_sframes_t)frames <= 0)
return -ENXIO;
plugin = plugin->prev;
err = snd_pcm_plugin_alloc(plugin, frames);
From: Takashi Iwai <[email protected]>
commit d683469b3c93d7e2afd39e6e1970f24700eb7a68 upstream.
The MIDI input event parser of the LINE6 driver may enter into an
endless loop when the unexpected data sequence is given, as it tries
to continue the secondary bytes without termination. Also, when the
input data is too short, the parser returns a negative error, while
the caller doesn't handle it properly. This would lead to the
unexpected behavior as well.
This patch addresses those issues by checking the return value
correctly and handling the one-byte event in the parser properly.
The bug was reported by syzkaller.
Reported-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/line6/driver.c | 2 +-
sound/usb/line6/midibuf.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -313,7 +313,7 @@ static void line6_data_received(struct u
line6_midibuf_read(mb, line6->buffer_message,
LINE6_MIDI_MESSAGE_MAXLEN);
- if (done == 0)
+ if (done <= 0)
break;
line6->message_length = done;
--- a/sound/usb/line6/midibuf.c
+++ b/sound/usb/line6/midibuf.c
@@ -163,7 +163,7 @@ int line6_midibuf_read(struct midi_buffe
int midi_length_prev =
midibuf_message_length(this->command_prev);
- if (midi_length_prev > 0) {
+ if (midi_length_prev > 1) {
midi_length = midi_length_prev - 1;
repeat = 1;
} else
On 4/1/20 9:16 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.175 release.
> There are 148 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 171 pass: 171 fail: 0
Qemu test results:
total: 405 pass: 405 fail: 0
Guenter
On 01/04/2020 17:16, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.175 release.
> There are 148 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.175-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.14:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 fail
Linux version: 4.14.175-rc1-gbc03924ca6ea
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Wed, 1 Apr 2020 at 22:11, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.175 release.
> There are 148 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.175-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.14.175-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: bc03924ca6eab72bec9fb6f455ea41bca1fa5ccc
git describe: v4.14.174-149-gbc03924ca6ea
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.174-149-gbc03924ca6ea
No regressions (compared to build v4.14.174)
No fixes (compared to build v4.14.174)
Ran 41452 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-commands-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-io-tests
* ltp-math-tests
* ltp-sched-tests
* perf
* v4l2-compliance
* kvm-unit-tests
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* ltp-open-posix-tests
* spectre-meltdown-checker-test
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 4/1/20 10:16 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.175 release.
> There are 148 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.175-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah